Active Flexion in Weight Bearing Better Correlates with Functional Outcomes of Total Knee Arthroplasty than Passive Flexion

PubMed Central

Song, Young Dong; Jain, Nimash; Kang, Yeon Gwi; Kim, Tae Yune

2016-01-01

Purpose Correlations between maximum flexion and functional outcomes in total knee arthroplasty (TKA) patients are reportedly weak. We investigated whether there are differences between passive maximum flexion in nonweight bearing and other types of maximum flexion and whether the type of maximum flexion correlates with functional outcomes. Materials and Methods A total of 210 patients (359 knees) underwent preoperative evaluation and postoperative follow-up evaluations (6, 12, and 24 months) for the assessment of clinical outcomes including maximum knee flexion. Maximum flexion was measured under five conditions: passive nonweight bearing, passive weight bearing, active nonweight bearing, and active weight bearing with or without arm support. Data were analyzed for relationships between passive maximum flexion in nonweight bearing by Pearson correlation analyses, and a variance comparison between measurement techniques via paired t test. Results We observed substantial differences between passive maximum flexion in nonweight bearing and the other four maximum flexion types. At all time points, passive maximum flexion in nonweight bearing correlated poorly with active maximum flexion in weight bearing with or without arm support. Active maximum flexion in weight bearing better correlated with functional outcomes than the other maximum flexion types. Conclusions Our study suggests active maximum flexion in weight bearing should be reported together with passive maximum flexion in nonweight bearing in research on the knee motion arc after TKA. PMID:27274468

Rhizosphere of Avicennia marina (Forsk.) Vierh. as a landmark for polythene degrading bacteria.

PubMed

Shahnawaz, Mohd; Sangale, Manisha K; Ade, Avinash B

2016-07-01

Due to high durability, cheap cost, and ease of manufacture, 311 million tons of plastic-based products are manufactured around the globe per annum. The slow/least rate of plastic degradation leads to generation of million tons of plastic waste per annum, which is of great environmental concern. Of the total plastic waste generated, polythene shared about 64 %. Various methods are available in the literature to tackle with the plastic waste, and biodegradation is considered as the most accepted, eco-friendly, and cost-effective method of polythene waste disposal. In the present study, an attempt has been made to isolate, screen, and characterize the most efficient polythene degrading bacteria by using rhizosphere soil of Avicennia marina as a landmark. From 12 localities along the west coast of India, a total of 123 bacterial isolates were recorded. Maximum percent weight loss (% WL; 21.87 ± 6.37 %) was recorded with VASB14 at pH 3.5 after 2 months of shaking at room temperature. Maximum percent weight gain (13.87 ± 3.6 %) was reported with MANGB5 at pH 7. Maximum percent loss in tensile strength (% loss in TS; 87.50 ± 4.8 %) was documented with VASB1 at pH 9.5. The results based on the % loss in TS were only reproducible. Further, the level of degradation was confirmed by scanning electron microscopic (SEM) and Fourier transform infrared spectroscopy (FTIR) analysis. In SEM analysis, scions/crakes were found on the surface of the degraded polythene, and mass of bacterial cell was also recorded on the weight-gained polythene strips. Maximum reduction in carbonyl index (4.14 %) was recorded in untreated polythene strip with Lysinibacillus fusiformis strain VASB14/WL. Based on 16S ribosomal RNA (rRNA) gene sequence homology, the most efficient polythene degrading bacteria were identified as L. fusiformis strainVASB14/WL and Bacillus cereus strain VASB1/TS.

Variable-speed Generators with Flux Weakening

NASA Technical Reports Server (NTRS)

Fardoun, A. A.; Fuchs, E. F.; Carlin, P. W.

1993-01-01

A cost-competitive, permanent-magnet 20 kW generator is designed such that the following criteria are satisfied: an (over) load capability of at least 30 kW over the entire speed range of 60-120 rpm, generator weight of about 550 lbs with a maximum radial stator flux density of 0.82 T at low speed, unity power factor operation, acceptably small synchronous reactances and operation without a gear box. To justify this final design four different generator designs are investigated: the first two designs are studied to obtain a speed range from 20 to 200 rpm employing rotor field weakening, and the latter two are investigated to obtain a maximum speed range of 40 to 160 rpm based on field weakening via the stator excitation. The generator reactances and induced voltages are computed using finite element/difference solutions. Generator losses and efficiencies are presented for all four designs at rated temperature of Tr=120C.

IN-HOSPITAL WEIGHT LOSS, PRESCRIBED DIET AND FOOD ACCEPTANCE

PubMed Central

LEANDRO-MERHI, Vania Aparecida; SREBERNICH, Silvana Mariana; GONÇALVES, Gisele Mara Silva; de AQUINO, José Luiz Braga

2015-01-01

Background Weight loss and malnutrition may be caused by many factors, including type of disease and treatment. Aim The present study investigated the occurrence of in-hospital weight loss and related factors. Method This cross-sectional study investigated the following variables of 456 hospitalized patients: gender, age, disease, weight variation during hospital stay, and type and acceptance of the prescribed diet. Repeated measures analysis of variance (ANOVA) was used for comparing patients' weight in the first three days in hospital stay and determining which factors affect weight. The generalized estimating equation was used for comparing the food acceptance rates. The significance level was set at 5%. Results The most prescribed diet was the regular (28.8%) and 45.5% of the patients lost weight during their stay. Acceptance of hospital food increased from the first to the third days of stay (p=0.0022) but weight loss was still significant (p<0.0001). Age and type of prescribed diet did not affect weight loss during the study period but type of disease and gender did. Patients with neoplasms (p=0.0052) and males (p=0.0002) lost more weight. Conclusion Weight loss during hospital stay was associated only with gender and type of disease. PMID:25861060

Pushing and pulling in relation to musculoskeletal disorders: a review of risk factors.

PubMed

Hoozemans, M J; van der Beek, A J; Frings-Dresen, M H; van Dijk, F J; van der Woude, L H

1998-06-01

The objective was to review the literature on risk factors for musculoskeletal disorders related to pushing and pulling. The risk factors have been described and evaluated from four perspectives: epidemiology, psychophysics, physiology, and biomechanics. Epidemiological studies have shown, based on cross-sectional data, that pushing and pulling is associated with low back pain. Evidence with respect to complaints of other parts of the musculoskeletal system is lacking. Risk factors have been found to influence the maximum (acceptable) push or pull forces as well as the physiological and mechanical strain on the human body. The risk factors have been divided into: (a) work situation, such as distance, frequency, handle height, and cart weight, (b) actual working method and posture/movement/exerted forces, such as foot distance and velocity, and (c) worker's characteristics, such as body weight. Longitudinal epidemiological studies are needed to relate pushing and pulling to musculoskeletal disorders.

DEM interpolation weight calculation modulus based on maximum entropy

NASA Astrophysics Data System (ADS)

Chen, Tian-wei; Yang, Xia

2015-12-01

There is negative-weight in traditional interpolation of gridding DEM, in the article, the principle of Maximum Entropy is utilized to analyze the model system which depends on modulus of space weight. Negative-weight problem of the DEM interpolation is researched via building Maximum Entropy model, and adding nonnegative, first and second order's Moment constraints, the negative-weight problem is solved. The correctness and accuracy of the method was validated with genetic algorithm in matlab program. The method is compared with the method of Yang Chizhong interpolation and quadratic program. Comparison shows that the volume and scaling of Maximum Entropy's weight is fit to relations of space and the accuracy is superior to the latter two.

75 FR 68657 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... LLC To Increase the Maximum Order Size Accepted by Floor Broker Systems From 25,000,000 Shares to 99... order size accepted by Floor broker systems from 25,000,000 shares to 99,000,000 shares. The text of the... systems shall accept a maximum order size of 99,000,000, an increase from the current 25,000,000 share...

Noise-induced annoyance from transportation noise: short-term responses to a single noise source in a laboratory.

PubMed

Kim, Jaehwan; Lim, Changwoo; Hong, Jiyoung; Lee, Soogab

2010-02-01

An experimental study was performed to compare the annoyances from civil-aircraft noise, military-aircraft noise, railway noise, and road-traffic noise. Two-way within-subjects designs were applied in this research. Fifty-two subjects, who were naive listeners, were given various stimuli with varying levels through a headphone in an anechoic chamber. Regardless of the frequency weighting network, even under the same average energy level, civil-aircraft noise was the most annoying, followed by military-aircraft noise, railway noise, and road-traffic noise. In particular, penalties in the time-averaged, A-weighted sound level (TAL) of about 8, 5, and 5 dB, respectively, were found in the civil-aircraft, military-aircraft, and railway noises. The reason could be clarified through the high-frequency component and the variability in the level. When people were exposed to sounds with the same maximum A-weighted level, a railway bonus of about 3 dB was found. However, transportation noise has been evaluated by the time-averaged A-weighted level in most countries. Therefore, in the present situation, the railway bonus is not acceptable for railway vehicles with diesel-electric engines.

High strength ferritic alloy

DOEpatents

Hagel, William C.; Smidt, Frederick A.; Korenko, Michael K.

1977-01-01

A high-strength ferritic alloy useful for fast reactor duct and cladding applications where an iron base contains from about 9% to about 13% by weight chromium, from about 4% to about 8% by weight molybdenum, from about 0.2% to about 0.8% by weight niobium, from about 0.1% to about 0.3% by weight vanadium, from about 0.2% to about 0.8% by weight silicon, from about 0.2% to about 0.8% by weight manganese, a maximum of about 0.05% by weight nitrogen, a maximum of about 0.02% by weight sulfur, a maximum of about 0.02% by weight phosphorous, and from about 0.04% to about 0.12% by weight carbon.

High strength ferritic alloy-D53

DOEpatents

Hagel, William C.; Smidt, Frederick A.; Korenko, Michael K.

1977-01-01

A high strength ferritic alloy is described having from about 0.2% to about 0.8% by weight nickel, from about 2.5% to about 3.6% by weight chromium, from about 2.5% to about 3.5% by weight molybdenum, from about 0.1% to about 0.5% by weight vanadium, from about 0.1% to about 0.5% by weight silicon, from about 0.1% to about 0.6% by weight manganese, from about 0.12% to about 0.20% by weight carbon, from about 0.02% to about 0.1% by weight boron, a maximum of about 0.05% by weight nitrogen, a maximum of about 0.02% by weight phosphorous, a maximum of about 0.02% by weight sulfur, and the balance iron.

33 CFR 401.4 - Maximum length and weight.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Maximum length and weight. 401.4 Section 401.4 Navigation and Navigable Waters SAINT LAWRENCE SEAWAY DEVELOPMENT CORPORATION, DEPARTMENT OF TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Condition of Vessels § 401.4 Maximum length and weight...

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and inboard-outdrive boats. 183.33 Section 183.33 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.33 Maximum weight capacity: Inboard and inboard-outdrive boats. (a) The maximum weight capacity (W...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2012 CFR

2012-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and inboard-outdrive boats. 183.33 Section 183.33 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.33 Maximum weight capacity: Inboard and inboard-outdrive boats. (a) The maximum weight capacity (W...

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and inboard-outdrive boats. 183.33 Section 183.33 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.33 Maximum weight capacity: Inboard and inboard-outdrive boats. (a) The maximum weight capacity (W...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2014 CFR

2014-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2011 CFR

2011-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2010 CFR

2010-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and inboard-outdrive boats. 183.33 Section 183.33 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.33 Maximum weight capacity: Inboard and inboard-outdrive boats. (a) The maximum weight capacity (W...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2013 CFR

2013-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

Correlation between CT numbers and tissue parameters needed for Monte Carlo simulations of clinical dose distributions

NASA Astrophysics Data System (ADS)

Schneider, Wilfried; Bortfeld, Thomas; Schlegel, Wolfgang

2000-02-01

We describe a new method to convert CT numbers into mass density and elemental weights of tissues required as input for dose calculations with Monte Carlo codes such as EGS4. As a first step, we calculate the CT numbers for 71 human tissues. To reduce the effort for the necessary fits of the CT numbers to mass density and elemental weights, we establish four sections on the CT number scale, each confined by selected tissues. Within each section, the mass density and elemental weights of the selected tissues are interpolated. For this purpose, functional relationships between the CT number and each of the tissue parameters, valid for media which are composed of only two components in varying proportions, are derived. Compared with conventional data fits, no loss of accuracy is accepted when using the interpolation functions. Assuming plausible values for the deviations of calculated and measured CT numbers, the mass density can be determined with an accuracy better than 0.04 g cm-3 . The weights of phosphorus and calcium can be determined with maximum uncertainties of 1 or 2.3 percentage points (pp) respectively. Similar values can be achieved for hydrogen (0.8 pp) and nitrogen (3 pp). For carbon and oxygen weights, errors up to 14 pp can occur. The influence of the elemental weights on the results of Monte Carlo dose calculations is investigated and discussed.

Psychophysically determined forces of dynamic pushing for female industrial workers: Comparison of two apparatuses.

PubMed

Ciriello, Vincent M; Maikala, Rammohan V; Dempsey, Patrick G; O'Brien, Niall V

2010-01-01

Using psychophysics, the maximum acceptable forces for pushing have been previously developed using a magnetic particle brake (MPB) treadmill at the Liberty Mutual Research Institute for Safety. The objective of this study was to investigate the reproducibility of maximum acceptable initial and sustained forces while performing a pushing task at a frequency of 1min(-1) both on a MPB treadmill and on a high-inertia pushcart. This is important because our pushing guidelines are used extensively as a ergonomic redesign strategy and we would like the information to be as applicable as possible to cart pushing. On two separate days, nineteen female industrial workers performed a 40-min MPB treadmill pushing task and a 2-hr pushcart task, in the context of a larger experiment. During pushing, the subjects were asked to select a workload they could sustain for 8h without "straining themselves or without becoming unusually tired, weakened, overheated or out of breath." The results demonstrated that maximum acceptable initial and sustained forces of pushing determined on the high inertia pushcart were 0.8% and 2.5% lower than the MPB treadmill. The results also show that the maximum acceptable sustained force of the MPB treadmill task was 0.5% higher than the maximum acceptable sustained force of Snook and Ciriello (1991). Overall, the findings confirm that the existing pushing data developed by the Liberty Mutual Research Institute for Safety still provides an accurate estimate of maximal acceptable forces for the selected combination of distance and frequency of push for female industrial workers.

Proportion of elementary school pupils’ anthropometric characteristics with dimensions of classroom furniture in Isfahan, Iran

PubMed Central

Habibi, Ehsanollah; Asaadi, Zahra; Hosseini, Seyed Mohsen

2011-01-01

BACKGROUND: This study is aimed to examine the appropriacy of school furniture to Iranian pupils′ anthropometric features. METHODS: The participants in this cross-sectional study were 493 boys and 489 girls with the age-range of 7 to 12 years who were selected through a multistage random cluster sampling procedure. Age, weight, height, and anthropometric dimensions were determined. RESULTS: This study indicates that there is a significant difference between the minimum and maximum acceptable dimensions and those of the available furniture (p < 0.001). CONCLUSIONS: In designing suitable furniture for pupils the anthropometric differences of age and gender must be taken into account. PMID:21448391

Feasibility and Acceptability of Delivering a Postpartum Weight Loss Intervention via Facebook: A Pilot Study.

PubMed

Waring, Molly E; Moore Simas, Tiffany A; Oleski, Jessica; Xiao, Rui S; Mulcahy, Julie A; May, Christine N; Pagoto, Sherry L

2018-01-01

To evaluate the feasibility and acceptability of a Facebook-delivered postpartum weight loss intervention. Overweight and obese postpartum women received a 12-week weight loss intervention via Facebook. Feasibility outcomes were recruitment, retention, engagement, and acceptability. Weight loss was an exploratory outcome. Participants (n = 19) were 3.5 (SD 2.2) months postpartum with a baseline body mass index of 30.1 (SD 4.2) kg/m 2 . Retention was 95%. Forty-two percent of participants visibly engaged on the last day of the intervention, and 100% in the last 4 weeks; 88% were likely or very likely to participate again and 82% were likely or very likely to recommend the program to a postpartum friend. Average 12-week weight loss was 4.8% (SD 4.2%); 58% lost ≥5%. Findings suggested that this Facebook-delivered intervention is feasible and acceptable and supports research to test efficacy for weight loss. Research is needed to determine how best to engage participants in social network-delivered weight loss interventions. Copyright © 2017 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Alternative Fuels Data Center

Science.gov Websites

Natural Gas Vehicle (NGV) Weight Exemption NGVs may exceed the federal maximum gross vehicle weight the weight of a comparable diesel tank and fueling system. The NGV must not exceed a maximum gross

Alternative Fuels Data Center

Science.gov Websites

Natural Gas Vehicle (NGV) Weight Exemption NGVs may exceed the maximum gross vehicle weight limit exceed a maximum gross vehicle weight of 82,000 pounds. (Reference Senate Bill 1102, 2017, and Texas

Validation of accuracy and community acceptance of the BIRTHweigh III scale for categorizing newborn weight in rural India.

PubMed

Darmstadt, G L; Kumar, V; Shearer, J C; Misra, R; Mohanty, S; Baqui, A H; Coffey, P S; Awasthi, S; Singh, J V; Santosham, M

2007-10-01

To determine the accuracy and acceptability of a handheld scale prototype designed for nonliterate users to classify newborns into three weight categories (>or=2,500 g; 2,000 to 2,499 g; and <2,000 g). Weights of 1,100 newborns in Uttar Pradesh, India, were measured on the test scale and validated against a gold standard. Mothers, family members and community health stakeholders were interviewed to assess the acceptability of the test scale. The test scale was highly sensitive and specific at classifying newborn weight (normal weight: 95.3 and 96.3%, respectively; low birth weight: 90.4 and 99.2%, respectively; very low birth weight: 91.7 and 98.4%, respectively). It was the overall agreement of the community that the test scale was more practical and easier to interpret than the gold standard. The BIRTHweigh III scale accurately identifies low birth weight and very low birth weight newborns to target weight-specific interventions. The scale is extremely practical and useful for resource-poor settings, especially those with low levels of literacy.

Acceptable health and priority weighting: Discussing a reference-level approach using sufficientarian reasoning.

PubMed

Wouters, S; van Exel, N J A; Rohde, K I M; Vromen, J J; Brouwer, W B F

2017-05-01

Health care systems are challenged in allocating scarce health care resources, which are typically insufficient to fulfil all health care wants and needs. One criterion for priority setting may be the 'acceptable health' approach, which suggests that society may want to assign higher priority to health benefits in people with "unacceptable" than in people with "acceptable" health. A level of acceptable health then serves as a reference point for priority setting. Empirical research has indicated that people may be able and willing to define health states as "unacceptable" or "acceptable", but little attention has been given to the normative implications of evaluating health benefits in relation to a reference level of acceptable health. The current paper aims to address this gap by relating insights from the distributive justice literature, i.e. the sufficientarian literature, to the acceptable health approach, as we argue that these approaches are related. We specifically focus on the implications of an 'acceptability' approach for priority weighting of health benefits, derived from sufficientarian reasoning and debates, and assess the moral implications of such weighting. Copyright © 2017 Elsevier Ltd. All rights reserved.

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

23 CFR 658.17 - Weight.

Code of Federal Regulations, 2010 CFR

2010-04-01

... maximum gross vehicle weight shall be 80,000 pounds except where lower gross vehicle weight is dictated by... of axles, or a vehicle is 20,000 pounds. (d) The maximum gross weight on tandem axles is 34,000... first and last axle is 36 feet or more. In no case shall the total gross weight of a vehicle exceed 80...

Low-cost high-resolution fast spin-echo MR of acoustic schwannoma: an alternative to enhanced conventional spin-echo MR?

PubMed

Allen, R W; Harnsberger, H R; Shelton, C; King, B; Bell, D A; Miller, R; Parkin, J L; Apfelbaum, R I; Parker, D

1996-08-01

To determine whether unenhanced high-resolution T2-weighted fast spin-echo MR imaging provides an acceptable and less expensive alternative to contrast-enhanced conventional T1-weighted spin-echo MR techniques in the diagnosis of acoustic schwannoma. We reviewed in a blinded fashion the records of 25 patients with pathologically documented acoustic schwannoma and of 25 control subjects, all of whom had undergone both enhanced conventional spin-echo MR imaging and unenhanced fast spin-echo MR imaging of the cerebellopontine angle/internal auditory canal region. The patients were imaged with the use of a quadrature head receiver coil for the conventional spin-echo sequences and dual 3-inch phased-array receiver coils for the fast spin-echo sequences. The size of the acoustic schwannomas ranged from 2 to 40 mm in maximum dimension. The mean maximum diameter was 12 mm, and 12 neoplasms were less than 10 mm in diameter. Acoustic schwannoma was correctly diagnosed on 98% of the fast spin-echo images and on 100% of the enhanced conventional spin-echo images. Statistical analysis of the data using the kappa coefficient demonstrated agreement beyond chance between these two imaging techniques for the diagnosis of acoustic schwannoma. There is no statistically significant difference in the sensitivity and specificity of unenhanced high-resolution fast spin-echo imaging and enhance T1-weighted conventional spin-echo imaging in the detection of acoustic schwannoma. We believe that the unenhanced high-resolution fast spin-echo technique provides a cost-effective method for the diagnosis of acoustic schwannoma.

Use of mobile phones as a tool for weight loss: a systematic review.

PubMed

Aguilar-Martínez, Alicia; Solé-Sedeño, Josep M; Mancebo-Moreno, Gemma; Medina, F Xavier; Carreras-Collado, Ramon; Saigí-Rubió, Francesc

2014-09-01

We conducted a systematic review of the literature on the use of mobile phones for weight loss. A total of 43 studies were identified on obese or overweight adults, aged 18 years or over. After review, ten articles met the inclusion criteria. There were 19-534 participants per study. Participants were from European, Asian and North American regions. The mean body mass index (BMI) of the subjects varied from 22 to 36 kg/m(2). Two studies used text messaging or multimedia messaging. All the other studies used mobile-phone apps or web-based programmes that could be accessed from mobile phones as a part of a weight-loss intervention or for evaluating their potential for use and their acceptance. Most studies lasted 2-4 months and the maximum duration was 1 year. All but two studies showed reductions in the participants' bodyweight, BMI, waist circumference and body fat in the various interventions. There appeared to be a proportional relationship between weight loss and programme use. The programmes most benefited those who took a pro-active approach to everyday problems. Frequent self-recording of weight seemed to be important, as was the personalisation of the intervention (counselling and individualized feedback). Finally, a social support system acted as a motivational tool. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations.

PubMed

Garg, Arun; Waters, Thomas; Kapellusch, Jay; Karwowski, Waldemar

2014-03-01

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers. At present it is not clear whether pushing or pulling should be favored. Similarly, it is not clear what handle heights would be optimal for pushing and pulling. Epidemiological studies are needed to determine relationships between psychophysically determined maximum acceptable pushing and pulling forces and risk of musculoskeletal injuries, in particular to low back and shoulders.

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations

PubMed Central

Garg, Arun; Waters, Thomas; Kapellusch, Jay; Karwowski, Waldemar

2015-01-01

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers. At present it is not clear whether pushing or pulling should be favored. Similarly, it is not clear what handle heights would be optimal for pushing and pulling. Epidemiological studies are needed to determine relationships between psychophysically determined maximum acceptable pushing and pulling forces and risk of musculoskeletal injuries, in particular to low back and shoulders. PMID:26664045

Preliminary study of a large span-distributed-load flying-wing cargo airplane concept

NASA Technical Reports Server (NTRS)

Jernell, L. S.

1978-01-01

An aircraft capable of transporting containerized cargo over intercontinental distances is analyzed. The specifications for payload weight, density, and dimensions in essence configure the wing and establish unusually low values of wing loading and aspect ratio. The structural weight comprises only about 18 percent of the design maximum gross weight. Although the geometric aspect ratio is 4.53, the winglet effect of the wing-tip-mounted vertical tails, increase the effective aspect ratio to approximately 7.9. Sufficient control power to handle the large rolling moment of inertia dictates a relatively high minimum approach velocity of 315 km/hr (170 knots). The airplane has acceptable spiral, Dutch roll, and roll-damping modes. A hardened stability augmentation system is required. The most significant noise source is that of the airframe. However, for both take-off and approach, the levels are below the FAR-36 limit of 108 db. The design mission fuel efficiency is approximately 50 percent greater than that of the most advanced, currently operational, large freighter aircraft. The direct operating cost is significantly lower than that of current freighters, the advantage increasing as fuel price increases.

Insect contamination protection for laminar flow surfaces

NASA Technical Reports Server (NTRS)

Croom, Cynthia C.; Holmes, Bruce J.

1986-01-01

The ability of modern aircraft surfaces to achieve laminar flow was well-accepted in recent years. Obtaining the maximum benefit of laminar flow for aircraft drag reduction requires maintaining minimum leading-edge contamination. Previously proposed insect contamination prevention methods have proved impractical due to cost, weight, or inconvenience. Past work has shown that insects will not adhere to water-wetted surfaces, but the large volumes of water required for protection rendered such a system impractical. The results of a flight experiment conducted by NASA to evaluate the performance of a porous leading-edge fluid discharge ice protection system operated as an insect contamination protections system are presented. In addition, these flights explored the environmental and atmospheric conditions most suitable for insect accumulation.

A distributed-memory approximation algorithm for maximum weight perfect bipartite matching

DOE Office of Scientific and Technical Information (OSTI.GOV)

Azad, Ariful; Buluc, Aydin; Li, Xiaoye S.

We design and implement an efficient parallel approximation algorithm for the problem of maximum weight perfect matching in bipartite graphs, i.e. the problem of finding a set of non-adjacent edges that covers all vertices and has maximum weight. This problem differs from the maximum weight matching problem, for which scalable approximation algorithms are known. It is primarily motivated by finding good pivots in scalable sparse direct solvers before factorization where sequential implementations of maximum weight perfect matching algorithms, such as those available in MC64, are widely used due to the lack of scalable alternatives. To overcome this limitation, we proposemore » a fully parallel distributed memory algorithm that first generates a perfect matching and then searches for weightaugmenting cycles of length four in parallel and iteratively augments the matching with a vertex disjoint set of such cycles. For most practical problems the weights of the perfect matchings generated by our algorithm are very close to the optimum. An efficient implementation of the algorithm scales up to 256 nodes (17,408 cores) on a Cray XC40 supercomputer and can solve instances that are too large to be handled by a single node using the sequential algorithm.« less

Characteristics of lip-mouth region in smiling position from 80 persons with acceptable faces and individual normal occlusions.

PubMed

Zhang, Jiangheng; Chen, Yangxi; Zhou, Xiukun

2002-09-01

The characteristics of lip-mouth region including the soft and hard tissues in smiling position with frontal fixed position photographic computer-aided analysis were studied. The subjects were 80 persons (40 male and 40 females, age range: 17 to approximately 25 years) with acceptable faces and individual normal occlusions. The subjects were asked to take maximum smiling position to accept photographic measurement with computer-aided analysis. The maximum smile line could be divided into 3 categories: low smile line (16.25%), average smile line (68.75%), and high smile line (15%). The method adopting maximum smiling position to study the lip-month region is reproducible and comparable. This study would be helpful to provide a quantitative reference for clinical investigation, diagnosis, treatment and efficacy appraisal.

Acceptance-Based versus Standard Behavioral Treatment for Obesity: Results from the Mind Your Health Randomized Controlled Trial

PubMed Central

Forman, Evan M.; Butryn, Meghan L.; Manasse, Stephanie M.; Crosby, Ross D.; Goldstein, Stephanie P.; Wyckoff, Emily P.; Thomas, J. Graham

2016-01-01

Objective To evaluate the efficacy, as well as potential moderators and mediators, of a revised acceptance-based behavioral treatment (ABT) for obesity, relative to standard behavioral treatment (SBT). Design and Methods Participants with overweight and obesity (n=190) were randomized to 25 sessions of ABT or SBT over 1 year. Primary outcome (weight), mediator and moderator measurements were taken at baseline, 6 months and/or 12 months, and weight was also measured every session. Results Participants assigned to ABT attained a significantly greater 12-month weight loss (13.3% ± 0.83) than did those assigned to SBT (9.8% ± 0.87; p=.005). A condition by quadratic time effect on session-by-session weights (p=.01) indicated that SBT had a shallower trajectory of weight loss followed by an upward deflection. ABT participants were also more likely to maintain a 10% weight loss at 12 months (64.0% vs 48.9%; p=.04). No evidence of moderation was found. Results supported the mediating role of autonomous motivation and psychological acceptance of food-related urges. Conclusion Behavioral weight loss outcomes can be improved by integrating self-regulation skills that are reflected in acceptance-based treatment, i.e., tolerating discomfort and reduction in pleasure, enacting commitment to valued behavior, and being mindfully aware during moments of decision making. PMID:27670400

Acceptance-based versus standard behavioral treatment for obesity: Results from the mind your health randomized controlled trial.

PubMed

Forman, Evan M; Butryn, Meghan L; Manasse, Stephanie M; Crosby, Ross D; Goldstein, Stephanie P; Wyckoff, Emily P; Thomas, J Graham

2016-10-01

To evaluate the efficacy, as well as potential moderators and mediators, of a revised acceptance-based behavioral treatment (ABT) for obesity, relative to standard behavioral treatment (SBT). Participants with overweight and obesity (n = 190) were randomized to 25 sessions of ABT or SBT over 1 year. Primary outcome (weight), mediator, and moderator measurements were taken at baseline, 6 months, and/or 12 months, and weight was also measured every session. Participants assigned to ABT attained a significantly greater 12-month weight loss (13.3% ± 0.83%) than did those assigned to SBT (9.8% ± 0.87%; P = 0.005). A condition by quadratic time effect on session-by-session weights (P = 0.01) indicated that SBT had a shallower trajectory of weight loss followed by an upward deflection. ABT participants were also more likely to maintain a 10% weight loss at 12 months (64.0% vs. 48.9%; P = 0.04). No evidence of moderation was found. Results supported the mediating role of autonomous motivation and psychological acceptance of food-related urges. Behavioral weight loss outcomes can be improved by integrating self-regulation skills that are reflected in acceptance-based treatment, i.e., tolerating discomfort and reduction in pleasure, enacting commitment to valued behavior, and being mindfully aware during moments of decision-making. © 2016 The Obesity Society.

Three-dimensional motion analysis of the lumbar spine during "free squat" weight lift training.

PubMed

Walsh, James C; Quinlan, John F; Stapleton, Robert; FitzPatrick, David P; McCormack, Damian

2007-06-01

Heavy weight lifting using a squat bar is a commonly used athletic training exercise. Previous in vivo motion studies have concentrated on lifting of everyday objects and not on the vastly increased loads that athletes subject themselves to when performing this exercise. Athletes significantly alter their lumbar spinal motion when performing squat lifting at heavy weights. Controlled laboratory study. Forty-eight athletes (28 men, 20 women) performed 6 lifts at 40% maximum, 4 lifts at 60% maximum, and 2 lifts at 80% maximum. The Zebris 3D motion analysis system was used to measure lumbar spine motion. Exercise was performed as a "free" squat and repeated with a weight lifting support belt. Data obtained were analyzed using SAS. A significant decrease (P < .05) was seen in flexion in all groups studied when lifting at 40% maximum compared with lifting at 60% and 80% of maximum lift. Flexion from calibrated 0 point ranged from 24.7 degrees (40% group) to 6.8 degrees (80% group). A significant increase (P < .05) was seen in extension when lifting at 40% maximum was compared with lifting at 60% and 80% maximum lift. Extension from calibrated 0 point ranged from -1.5 degrees (40% group) to -20.3 degrees (80% group). No statistically significant difference was found between motion seen when exercise was performed as a free squat or when lifting using a support belt in any of the groups studied. Weight lifting using a squat bar causes athletes to significantly hyperextend their lumbar spines at heavier weights. The use of a weight lifting support belt does not significantly alter spinal motion during lifting.

49 CFR 173.417 - Authorized fissile materials packages.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for export and import shipments. (2) A residual “heel” of enriched solid uranium hexafluoride may be... “Heel” in a Specification 7A Cylinder) Maximum cylinder diameter Centimeters Inches Cylinder volume Liters Cubic feet Maximum Uranium 235-enrichment (weight)percent Maximum “Heel” weight per cylinder UF6...

49 CFR 173.417 - Authorized fissile materials packages.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for export and import shipments. (2) A residual “heel” of enriched solid uranium hexafluoride may be... “Heel” in a Specification 7A Cylinder) Maximum cylinder diameter Centimeters Inches Cylinder volume Liters Cubic feet Maximum Uranium 235-enrichment (weight)percent Maximum “Heel” weight per cylinder UF6...

Acute and sub-chronic toxicity of Cajanus cajan leaf extracts.

PubMed

Tang, Rong; Tian, Ru-Hua; Cai, Jia-Zhong; Wu, Jun-Hui; Shen, Xiao-Ling; Hu, Ying-Jie

2017-12-01

The leaves of Cajanus cajan (L.) Millsp. (Fabaceae) have diverse bioactivities, but little safety data are reported. This study examines the toxicological profiles of C. cajan leaf extracts. The leaves were extracted by water or 90% ethanol to obtain water or ethanol extract (WEC or EEC). EEC was suspended in water and successively fractionated into dichloroform and n-butanol extracts (DEC and BEC). Marker compounds of the extracts were monitored by high-performance liquid chromatography (HPLC). Kunming mice were administered with a single maximum acceptable oral dose (15.0 g/kg for WEC, EEC and BEC and 11.3 g/kg for DEC) to determine death rate or maximal tolerated doses (MTDs). In sub-chronic toxicity investigation, Sprague-Dawley rats were orally given WEC or EEC at 1.5, 3.0 or 6.0 g/kg doses for four weeks and observed for two weeks after dosing to determine toxicological symptoms, histopathology, biochemistry and haematology. Flavonoids and stilbenes in the extracts were assayed. In acute toxicity test, no mortality and noted alterations in weight and behavioural abnormality were observed, and the maximum oral doses were estimated as MTDs. In sub-chronic toxicity study, no mortality and significant variances in haematological and biochemical parameters or organ histopathology were observed, but increased kidney weight in 3.0 g/kg WEC- or 3.0 and 6.0 g/kg EEC-treated female rats, and reduced testes and epididymis weight in EEC-treated male rats were recorded. These changes returned to the level of control after recovery period. Acute and sub-chronic toxicity of Cajanus cajan leaf extracts was not observed.

Acceptability of a Weight Management Intervention for Pregnant and Postpartum Women with BMI ≥30 kg/m2: A Qualitative Evaluation of an Individualized, Home-Based Service.

PubMed

Atkinson, Lou; Olander, Ellinor K; French, David P

2016-01-01

There have been recent calls for more evidence regarding effective antenatal and postnatal interventions to address the serious health risks of maternal obesity and associated childhood obesity. The Maternal and Early Years Healthy Weight Service (MAEYS) is an innovative service, delivered by specialist healthy weight advisors, for obese women (BMI ≥30 kg/m2) during pregnancy and up to 2 years after delivery. The service focuses on healthy gestational weight gain, postpartum weight loss and establishing healthy infant feeding and active play. MAEYS was adopted by six local health organizations in the U.K. as a 1 year pilot program. The aim of the present research was to assess the acceptability of this intervention among MAEYS participants. Semi-structured interviews with 20 women, with data analyzed thematically. High levels of acceptability were reported. The convenience and comfort of home visits, personalized advice on diet and physical activity, supportive approach of the healthy weight advisor and regular weight monitoring were all cited as advantages of the service. Service users suggested that more frequent contact with advisors and practical support such as recipes would improve the service. MAEYS is a novel, community-based intervention delivered in the home which has demonstrated acceptability to its recipients. It therefore shows promise as an early intervention to reduce the risks of maternal obesity and subsequently reduce childhood obesity. An evaluation of the efficacy of MAEYS in preventing excess gestational weight gain and losing weight postpartum is now needed.

Internalization of the Sociocultural Ideal: Weight-Related Attitudes and Dieting Behaviors among Young Adolescent Girls.

ERIC Educational Resources Information Center

Sherwood, Nancy E.; Neumark-Sztainer, Dianne

2001-01-01

Surveyed adolescent girls regarding body dissatisfaction, dieting, and internalization of sociocultural values, media-influenced knowledge, acceptance of varied body shapes, and media exposure. Girls understood media influence on self-image and behavior and accepted varied body shapes. Significant numbers reported dissatisfaction with weight and…

Item Selection and Ability Estimation Procedures for a Mixed-Format Adaptive Test

ERIC Educational Resources Information Center

Ho, Tsung-Han; Dodd, Barbara G.

2012-01-01

In this study we compared five item selection procedures using three ability estimation methods in the context of a mixed-format adaptive test based on the generalized partial credit model. The item selection procedures used were maximum posterior weighted information, maximum expected information, maximum posterior weighted Kullback-Leibler…

Consumer acceptance of an extruded soy-based high-protein breakfast cereal.

PubMed

Yeu, K; Lee, Y; Lee, S-Y

2008-01-01

Studies have shown the beneficial effects of soy and high-protein diets on weight loss. The objective of this study was to determine consumer acceptance of a soy-based high-protein breakfast cereal developed to be utilized for weight loss and control. Four formulations with soy flour content of 41%, 47%, 54%, and 60% (w/w) were processed by extrusion. The formulations met the Food and Drug Administration (FDA) guidelines to claim the role of soy protein in reducing the risk of cardiovascular diseases and guidelines for high-protein and high-fiber foods. The effects of soy flour level, addition of cinnamon flavor, and evaluation with or without milk on acceptance were investigated. Overall acceptance of 3 of 8 cereal products was also compared to the acceptance of 5 commercial products in the "healthy" cereal category. Addition of up to 54% (w/w) soy flour resulted in comparable acceptance ratings to products with lower soy flour content. Addition of milk improved aroma and texture acceptance scores and addition of cinnamon flavor improved overall, aroma, and taste acceptance scores. Acceptance of the developed cereal products was not as high as the commercial products; however, it significantly increased when nutritional and cost information was presented. The results of this study demonstrated that with modification of the formulations, an acceptable high-protein soy-based cereal can be developed to increase protein consumption during breakfast meals, which can consequently aid in weight loss and control.

23 CFR 658.17 - Weight.

Code of Federal Regulations, 2012 CFR

2012-04-01

... the bridge formula. (c) The maximum gross weight upon any one axle, including any one axle of a group... following formula, referred to as the Bridge Gross Weight Formula: EC14OC91.012 except that two consecutive... derived from the Bridge Formula, up to a maximum of 80,000 pounds, including all enforcement tolerances...

23 CFR 658.17 - Weight.

Code of Federal Regulations, 2011 CFR

2011-04-01

... the bridge formula. (c) The maximum gross weight upon any one axle, including any one axle of a group... following formula, referred to as the Bridge Gross Weight Formula: EC14OC91.012 except that two consecutive... derived from the Bridge Formula, up to a maximum of 80,000 pounds, including all enforcement tolerances...

DC-10 winglet flight evaluation

NASA Technical Reports Server (NTRS)

Taylor, A. B.

1983-01-01

Results of a flight evaluation of winglets on a DC-10 Series 10 aircraft are presented. For sensitive areas of comparison, effects of winglets were determined back-to-back with and without winglets. Basic and reduced-span winglet configurations were tested. After initial encounter with low-speed buffet, a number of acceptable configurations were developed. For maximum drag reduction at both cruise and low speeds, lower winglets were required, having leading edge devices on upper and lower winglets for the latter regime. The cruise benefits were enhanced by adding outboard aileron droop to the reduced-span winglet aircraft. Winglets had no significant impact on stall speeds, high-speed buffet boundary, and stability and control. Flutter test results agreed with predictions and ground vibration data. Flight loads measurement, provided in a concurrent program, also agreed with predictions. It was estimated that a production version of the aircraft, using the reduced-span winglet and aileron droop, would yield a 3-percent reduction in fuel burned with capacity payload. This range was 2% greater than with winglets. A 5% reduction in takeoff distance at maximum takeoff weight would also result.

A randomized controlled trial of brief interventions for body dissatisfaction.

PubMed

Wade, Tracey; George, Wing Man; Atkinson, Melissa

2009-10-01

The authors examined the relative effectiveness of 3 different approaches to the experience of body dissatisfaction compared to a control and ruminative attention control condition, with respect to increasing weight and appearance satisfaction. One hundred female undergraduates (mean age = 24.38, SD = 9.39) underwent a body dissatisfaction induction procedure, which significantly decreased levels of weight and appearance satisfaction. Participants were then randomized, 20 to each of 5 groups: control, ruminative attention control, acceptance, distraction, and cognitive dissonance. With the exception of the control group, participants were briefly trained in their assigned technique and were asked to practice this over the next 5 min while repeated measures of weight and appearance satisfaction were recorded. Acceptance, cognitive dissonance, and distraction were superior to both control conditions in increasing weight satisfaction and were superior to a control condition in improving appearance satisfaction. Only acceptance was superior in improving appearance satisfaction compared to a ruminative attention control. The evidence suggests that acceptance is a promising approach to investigate further with respect to its efficacy for reducing body dissatisfaction. (c) 2009 APA, all rights reserved.

Exceeding the Asymptotic Limit of Polymer Drag Reduction.

PubMed

Choueiri, George H; Lopez, Jose M; Hof, Björn

2018-03-23

The drag of turbulent flows can be drastically decreased by adding small amounts of high molecular weight polymers. While drag reduction initially increases with polymer concentration, it eventually saturates to what is known as the maximum drag reduction (MDR) asymptote; this asymptote is generally attributed to the dynamics being reduced to a marginal yet persistent state of subdued turbulent motion. Contrary to this accepted view, we show that, for an appropriate choice of parameters, polymers can reduce the drag beyond the suggested asymptotic limit, eliminating turbulence and giving way to laminar flow. At higher polymer concentrations, however, the laminar state becomes unstable, resulting in a fluctuating flow with the characteristic drag of the MDR asymptote. Our findings indicate that the asymptotic state is hence dynamically disconnected from ordinary turbulence.

Exceeding the Asymptotic Limit of Polymer Drag Reduction

NASA Astrophysics Data System (ADS)

Choueiri, George H.; Lopez, Jose M.; Hof, Björn

2018-03-01

The drag of turbulent flows can be drastically decreased by adding small amounts of high molecular weight polymers. While drag reduction initially increases with polymer concentration, it eventually saturates to what is known as the maximum drag reduction (MDR) asymptote; this asymptote is generally attributed to the dynamics being reduced to a marginal yet persistent state of subdued turbulent motion. Contrary to this accepted view, we show that, for an appropriate choice of parameters, polymers can reduce the drag beyond the suggested asymptotic limit, eliminating turbulence and giving way to laminar flow. At higher polymer concentrations, however, the laminar state becomes unstable, resulting in a fluctuating flow with the characteristic drag of the MDR asymptote. Our findings indicate that the asymptotic state is hence dynamically disconnected from ordinary turbulence.

Glider kits cut truck costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1984-02-01

Trucks used for the delivery of coal have a relatively limited life because they must be specified for somewhat less than brute strength in order to achieve maximum payload within existing weight and length limitations. The major drive train components such as engine, transmission, and drive axles can last longer if rebuilt or remanufactured periodically. For that reason glider kits and other truck components ready for the installation of the drive chain are becoming increasingly popular. These kits have been available for many years, but were regarded only as a means of salvaging late model wrecks or burned trucks. Theirmore » recent acceptance as a means of periodic fleet updating is built around the low cost and immediate availability of remanufactured major components. The cost advantages in using these glider kits are discussed.« less

Thresholding Based on Maximum Weighted Object Correlation for Rail Defect Detection

NASA Astrophysics Data System (ADS)

Li, Qingyong; Huang, Yaping; Liang, Zhengping; Luo, Siwei

Automatic thresholding is an important technique for rail defect detection, but traditional methods are not competent enough to fit the characteristics of this application. This paper proposes the Maximum Weighted Object Correlation (MWOC) thresholding method, fitting the features that rail images are unimodal and defect proportion is small. MWOC selects a threshold by optimizing the product of object correlation and the weight term that expresses the proportion of thresholded defects. Our experimental results demonstrate that MWOC achieves misclassification error of 0.85%, and outperforms the other well-established thresholding methods, including Otsu, maximum correlation thresholding, maximum entropy thresholding and valley-emphasis method, for the application of rail defect detection.

Dynamic deformation analysis of light-weight mirror

NASA Astrophysics Data System (ADS)

Zhang, Yingtao; Cao, Xuedong; Kuang, Long; Yang, Wei

2012-10-01

In the process of optical dynamic target work, under the effort of the arm of dynamic target, the mirror needs to do circular motion, additional accelerated motion and uniform motion. The maximum acceleration is 10°/s2 and the maximum velocity is 30°/s. In this paper, we mostly analyze the dynamic deformation of a 600 mm honeycomb light-weight mirror of a certain dynamic target. Using the FEA (finite element analysis) method, first of all, we analyze the deformation of the light-weight mirror induced in gravity at different position; later, the dynamic deformation of light-weight mirror is analyzed in detailed. The analysis results indicate that, when the maximum acceleration is 10°/s2 and the maximum velocity is 30°/s, the centripetal force is 5% of the gravity at the equal mass, and the dynamic deformation of the mirror is 6.1% of the deformation induced by gravity.

Weighing both sides: morality, mortality, and framing contests over obesity.

PubMed

Saguy, Abigail C; Riley, Kevin W

2005-10-01

Despite recent and growing media attention surrounding obesity in the United States, the so-called obesity epidemic remains a highly contested scientific and social fact. This article examines the contemporary obesity debate through systematic examination of the claims and claimants involved in the controversy. We argue that four primary groups-antiobesity researchers, antiobesity activists, fat acceptance researchers, and fat acceptance activists-are at the forefront of this controversy and that these groups are fundamentally engaged in framing contests over the nature and consequences of excess body weight. While members of the fat acceptance groups embrace a body diversity frame, presenting fatness as a natural and largely inevitable form of diversity, members of the antiobesity camp frame higher weights as risky behavior akin to smoking, implying that body weight is under personal control and that people have a moral and medical responsibility to manage their weight. Both groups sometimes frame obesity as an illness, which limits blame by suggesting that weight is biologically or genetically determined but simultaneously stigmatizes fat bodies as diseased. While the antiobesity camp frames obesity as an epidemic to increase public attention, fat acceptance activists argue that concern over obesity is distracting attention from a host of more important health issues for fat Americans. We examine the strategies claimants use to establish their own credibility or discredit their opponents, and explain how the fat acceptance movement has exploited structural opportunities and cultural resources created by AIDS activism and feminism to wield some influence over U.S. public health approaches. We conclude that notions of morality play a central role in the controversy over obesity, as in many medical disputes, and illustrate how medical arguments about body weight can be used to stymie rights claims and justify morality-based fears.

Selective effects of weight and inertia on maximum lifting.

PubMed

Leontijevic, B; Pazin, N; Kukolj, M; Ugarkovic, D; Jaric, S

2013-03-01

A novel loading method (loading ranged from 20% to 80% of 1RM) was applied to explore the selective effects of externally added simulated weight (exerted by stretched rubber bands pulling downward), weight+inertia (external weights added), and inertia (covariation of the weights and the rubber bands pulling upward) on maximum bench press throws. 14 skilled participants revealed a load associated decrease in peak velocity that was the least associated with an increase in weight (42%) and the most associated with weight+inertia (66%). However, the peak lifting force increased markedly with an increase in both weight (151%) and weight+inertia (160%), but not with inertia (13%). As a consequence, the peak power output increased most with weight (59%), weight+inertia revealed a maximum at intermediate loads (23%), while inertia was associated with a gradual decrease in the peak power output (42%). The obtained findings could be of importance for our understanding of mechanical properties of human muscular system when acting against different types of external resistance. Regarding the possible application in standard athletic training and rehabilitation procedures, the results speak in favor of applying extended elastic bands which provide higher movement velocity and muscle power output than the usually applied weights. © Georg Thieme Verlag KG Stuttgart · New York.

Determining Changes in Electromyography Indices when Measuring Maximum Acceptable Weight of Lift in Iranian Male Students.

PubMed

Salehi Sahl Abadi, A; Mazloumi, A; Nasl Saraji, G; Zeraati, H; Hadian, M R; Jafari, A H

2018-03-01

In spite of the increasing degree of automation in industry, manual material handling (MMH) is still performed in many occupational settings. The aim of the current study was to determine the maximum acceptable weight of lift using psychophysical and electromyography indices. This experimental study was conducted among 15 male students recruited from Tehran University of Medical Sciences. Each participant performed 18 different lifting tasks which involved three lifting frequencies, three lifting heights and two box sizes. Each set of experiments was conducted during the 20 min work period using free-style lifting technique and subjective as well as objective assessment methodologies. SPSS version 18 software was used for descriptive and analytical analyses by Friedman, Wilcoxon and Spearman correlation techniques. The results demonstrated that muscle activity increased with increasing frequency, height of lift and box size (P<0.05). Meanwhile, MAWLs obtained in this study are lower than those in Snook table (P<0.05). In this study, the level of muscle activity in percent MVC in relation to the erector spine muscles in L3 and T9 regions as well as left and right abdominal external oblique muscles were at 38.89%, 27.78%, 11.11% and 5.55% in terms of muscle activity is more than 70% MVC, respectively. The results of Wilcoxon test revealed that for both small and large boxes under all conditions, significant differences were detected between the beginning and end of the test values for MPF of erector spine in L3 and T9 regions, and left and right abdominal external oblique muscles (P<0.05). The results of Spearman correlation test showed that there was a significant relation between the MAWL, RMS and MPF of the muscles in all test conditions (P<0.05). Based on the results of this study, it was concluded if muscle activity is more than 70% of MVC, the values of Snook tables should be revisited. Furthermore, the biomechanical perspective should receive special attention in determining the standards for MMH.

Maximum likelihood estimation of signal-to-noise ratio and combiner weight

NASA Technical Reports Server (NTRS)

Kalson, S.; Dolinar, S. J.

1986-01-01

An algorithm for estimating signal to noise ratio and combiner weight parameters for a discrete time series is presented. The algorithm is based upon the joint maximum likelihood estimate of the signal and noise power. The discrete-time series are the sufficient statistics obtained after matched filtering of a biphase modulated signal in additive white Gaussian noise, before maximum likelihood decoding is performed.

14 CFR 27.473 - Ground loading conditions and assumptions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... maximum weight must be used that is not less than the maximum weight. A rotor lift may be assumed to act through the center of gravity throughout the landing impact. This lift may not exceed two-thirds of the...

14 CFR 27.473 - Ground loading conditions and assumptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... maximum weight must be used that is not less than the maximum weight. A rotor lift may be assumed to act through the center of gravity throughout the landing impact. This lift may not exceed two-thirds of the...

14 CFR 29.473 - Ground loading conditions and assumptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... maximum weight must be used that is not less than the maximum weight. A rotor lift may be assumed to act through the center of gravity throughout the landing impact. This lift may not exceed two-thirds of the...

14 CFR 29.473 - Ground loading conditions and assumptions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... maximum weight must be used that is not less than the maximum weight. A rotor lift may be assumed to act through the center of gravity throughout the landing impact. This lift may not exceed two-thirds of the...

40 CFR 201.26 - Procedures for the measurement on receiving property of retarder and car coupling noise.

Code of Federal Regulations, 2010 CFR

2010-07-01

... maximum A-weighted sound levels (FAST) for every retarder sound observed during the measurement period... performance as appropriate. (2) Data. The maximum A-weighted sound levels (FAST) for every car coupling impact...

The effect of interpersonal rejection on attentional biases regarding thin-ideal and non-thin images: The moderating role of body weight- and shape-based self-worth.

PubMed

Rieger, Elizabeth; Dolan, Ashleigh; Thomas, Brittany; Bell, Jason

2017-09-01

Interpersonal dysfunction and weight/shape-based self-worth have been implicated as key constructs for eating disorders, although the relationship between these two concepts is under-researched. This study investigated the moderating role of weight/shape-based self-worth in terms of the impact of interpersonal rejection on attentional bias regarding thin-ideal and non-thin images. Participants were 94 females without an eating disorder, who were exposed to either interpersonal rejection or acceptance (using the Cyberball paradigm), and subsequently assessed in terms of their attentional biases regarding thin-ideal and non-thin images. Results revealed that weight/shape-based self-worth moderated the relationship between interpersonal rejection/acceptance and attentional biases for thin-ideal (but not non-thin) images. Specifically, participants with a greater tendency to base their self-worth on weight/shape demonstrated reduced avoidance of thin-ideal images when rejected relative to those who were accepted. The findings support the role of interpersonal rejection in eliciting attentional disturbances among those with higher body weight/shape-based self-worth. Copyright © 2017 Elsevier Ltd. All rights reserved.

Be Positive Be Healthe: Development and Implementation of a Targeted e-Health Weight Loss Program for Young Women.

PubMed

Hutchesson, Melinda J; Morgan, Philip J; Callister, Robin; Pranata, Ilung; Skinner, Geoff; Collins, Clare E

2016-06-01

Greater numbers of women are entering young adulthood overweight, but traditional weight loss programs do not appeal to them. This article describes the development and evaluation of an e-health weight loss intervention for young women (18-30 years of age). Young women's preferences for a targeted weight loss program were investigated via a cross-sectional online survey. A 3-month targeted weight loss program for young women was developed based on the formative research. A single-arm pre-post study was conducted to evaluate the acceptability of the intervention (process evaluation survey and objective usage data) and to estimate the treatments' effects on weight-related outcomes from baseline to 3 months. Online survey respondents (n = 274) indicated preferences for various technologies (Web site, online quizzes with e-mail feedback and goal setting, an online discussion forum, smartphone application, e-mail newsletters, and text messages). Eighteen (mean ± standard deviation [SD] age, 22.8 ± 3.2 years; body mass index, 27.3 ± 1.6 kg/m(2)) women entered the pre-post study. Mean satisfaction was 3.4 ± 1.0 (maximum of 5), and 66.7% of participants completed the study. Significant reductions in mean ± SD weight (-1.5 ± 2.4 kg; p = 0.02) and waist circumference (-0.7 ± 1.4 cm; p = 0.04) were observed. Due to lower than anticipated participant satisfaction, modifications to the program content and modes of delivery are required to ensure a higher proportion of young women complete and actively engage with the program. The positive effects of treatment on weight-related outcomes supports further refinement and evaluation of targeted, e-health weight loss interventions for young women.

Developmental patterns and family predictors of adolescent weight concerns: a replication and extension.

PubMed

Lam, Chun Bun; McHale, Susan M

2012-05-01

We examined how weight concerns changed across adolescence and whether within-person changes in parent-adolescent relationships were longitudinally linked to within-person changes in adolescent weight concerns. Participants were mothers, fathers, and the two eldest adolescent siblings from 201 families. Adolescents rated their weight concerns on five occasions across 7 years. Parents rated their acceptance of and conflict with their adolescents, and adolescents rated their depressive symptoms, a year prior to each weight concern measurement. Although girls' weight concerns increased from early to late adolescence and then leveled off, boys' weight concerns remained relatively unchanged. Moreover, controlling for adolescents' depressive symptoms, when mothers reported less acceptance of and fathers reported more conflict with their adolescents than usual, adolescents reported more weight concerns than usual in the following year. Findings highlight the vulnerability of adolescents and the role of both mothers and fathers in the etiology of weight-related problems. Copyright © 2012 Wiley Periodicals, Inc.

14 CFR 29.87 - Height-velocity envelope.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Weight from the maximum weight (at sea level) to the highest weight approved for takeoff and landing at each altitude. For helicopters, this weight need not exceed the highest weight allowing hovering out-of...

14 CFR 29.87 - Height-velocity envelope.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Weight from the maximum weight (at sea level) to the highest weight approved for takeoff and landing at each altitude. For helicopters, this weight need not exceed the highest weight allowing hovering out-of...

14 CFR 29.87 - Height-velocity envelope.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Weight from the maximum weight (at sea level) to the highest weight approved for takeoff and landing at each altitude. For helicopters, this weight need not exceed the highest weight allowing hovering out-of...

14 CFR 29.87 - Height-velocity envelope.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Weight from the maximum weight (at sea level) to the highest weight approved for takeoff and landing at each altitude. For helicopters, this weight need not exceed the highest weight allowing hovering out-of...

Association between summer temperature and body weight in Japanese adolescents and children: An ecological analysis.

PubMed

Yokoya, Masana; Higuchi, Yukito

2016-11-01

Several experimental studies reported evidence of a negative energy balance at higher temperatures. However, corresponding weight loss has not been noted in clinical practice. This study investigated the geographical association between outdoor temperature and body weight in Japanese adolescents and children. An ecological analysis was conducted using prefecture-level data on the mean body weight of Japanese adolescents and children over a 25-year period and Japanese mesh (regional) climatic data on the mean annual temperature, mean daily maximum temperature in August, and mean daily minimum temperature in January were also analyzed. Correlation analysis uncovered a stronger association between weight and the mean daily maximum temperature in August than with other climatic variables. Moreover, multiple regression analysis indicated that height and the mean daily maximum temperature in August were statistically significant predictors of weight. This suggests that geographical differences in weight in Japanese adolescents and children can be explained by the complementary relationship between height-associated weight gain and weight loss caused by summer heat. Summer temperatures may reduce the proportion of children who are overweight and contribute to geographical differences in body weight in Japanese adolescents and children. Am. J. Hum. Biol. 28:789-795, 2016. © 2016Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Residue depletion of tilmicosin in cattle after subcutaneous administration.

PubMed

Jiang, Haiyang; Ding, Shuangyang; Li, Jiancheng; An, Dianjin; Li, Cun; Shen, Jianzhong

2006-07-12

A study of tissue residue depletion of tilmicosin in cattle was conducted after a single subcutaneous injection at the therapeutic level of 10 mg per kg body weight. Eighteen cross cattle were treated with the tilmicosin oil formulation (30%). Three treated animals (two males and one female) were selected randomly to be scarified at 1, 7, 14, 28, and 35 days withdrawal after injection. Samples of the injection site and of muscle, liver, kidney, and fat were collected. Tilmicosin residue concentrations were determined using a high-performance liquid chromatography (HPLC) method with a UV detector at 290 nm. Using a statistical method recommended by the Committee for Veterinary Medical Products of European Medical Evaluation Agency, the withdrawal time of 34 days was established when all tissue residues except samples in the injection site were below the accepted maximum residue limits.

Safety of 8-weeks oral administration of Arctium lappa L.

PubMed

Bok, So-Hyeon; Cho, Seung Sik; Bae, Chun-Sik; Park, Dae-Hun; Park, Kyung-Mok

2017-09-01

Recently, worldwide dietary reference intakes have been considered an important guideline for public health. Some governments and the World Health Organization (WHO) provide guidelines concerning dietary intake. Although an ingredient may have a history of use as a culinary material, changes in the environment over time suggest that the acceptable maximum intake each of food/culinary material should be regularly evaluated. Arctium lappa L. has been used as a culinary material for many centuries in Korea and Japan and some recent studies have reported related therapeutic effects. However, there are no reports on the safety of repeated oral administration. In this study, we evaluated the safety of a 8-weeks repeated oral intake of A. lappa . We concluded that treatment with <250 mg/kg A. lappa , which was within the safety range, resulted in body weight decrease and blood glucose suppression.

Inverting the food pyramid? Social and cultural acceptability of Walter Willett's dietary recommendations among people with weight concerns.

PubMed

Nielsen, A; Korzen, S; Holm, L

2008-07-01

The article presents results from a survey that was carried out among participants in a strictly controlled dietary intervention trial in order to investigate and compare the social and cultural acceptability of three different diets. Measures of social and cultural acceptability included liking of diet, social eating events, practical matters surrounding shopping, cooking, eating, understandings of the relationship between diet type, bodyweight and health, and preferences for specific foods. The survey study focuses especially on the acceptability of the diet recommended by American epidemiologist Walter Willett. On most measures the results indicated that a diet based on Willett's recommendations had a generally high level of acceptability. Scepticism related primarily to the health and weight benefits of this diet in comparison with those of the present dietary recommendations in Denmark. The survey also revealed that participants attributed more influence on their body weight to the amount of food they ate than they did to the composition of the diets they followed. While the scope of the study does not allow for the generalizations of results to a general population level, the experimental design provides detailed insight into social and cultural aspects of experiences of strict dietary adherence.

21 CFR 161.173 - Canned wet pack shrimp in transparent or nontransparent containers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (dorsal tract, back vein, or sand vein). (ii) Deveined shrimp containing not less than 95 percent by...) Acceptable quality level (AQL). The maximum percent of defective sample units permitted in a lot that will be accepted approximately 95 percent of the time. (ii) Sampling plans: Acceptable Quality Level 6.5 Lot size...

Participant experiences of two successful habit-based weight-loss interventions in Australia: a qualitative study

PubMed Central

2018-01-01

Objectives Habit-based weight-loss interventions have shown clinically important weight loss and weight-loss maintenance. Understanding why habit-based interventions work is therefore of great value, but there is little qualitative evidence about the experiences of participants in such programmes. We explored the perspectives of individuals who completed two habit-based weight-management programmes, Ten Top Tips and Do Something Different. Design One-on-one, face-to-face, semistructured interviews were conducted and analysed thematically. Setting Participants from the community were interviewed at Bond University, Australia. Participants Using a maximum variation design, we recruited 15 participants (eight men, seven women) aged 39–69 years (mean 53.3 years, SD 10.3) with a range of education levels (no high school to university degree) and percentage weight change on the programmes (+4.0% to −10.4%). Main outcome measures (1) The general experience of participants who completed the Ten Top Tips or Do Something Different intervention, (2) whether and how the interventions affected the participants’ lifestyle postintervention, and (3) participants’ views regarding the acceptability and practical application of Ten Top Tips and Do Something Different. Results Participants reported positive experiences of the two programmes, both during and after the interventions. Participants particularly enjoyed the novelty of the interventions as they shifted focus from diet and exercise, to practical everyday habit changes. They also reported indirect health benefits such as increased energy levels, increased confidence and improved self-awareness. Accountability throughout the programmes and convenience of the interventions were identified as key themes and facilitators for weight-loss success. Conclusions This study offers insight into how and why habit-based interventions might work. Overall, Ten Top Tips and Do Something Different are practical and convenient to implement, and are viewed favourably by participants when compared with conventional lifestyle programmes for weight control. Trial registration number ACTRN12615000114549. PMID:29858412

49 CFR 178.345-3 - Structural integrity.

Code of Federal Regulations, 2010 CFR

2010-10-01

... requirements and acceptance criteria. (1) The maximum calculated design stress at any point in the cargo tank wall may not exceed the maximum allowable stress value prescribed in Section VIII of the ASME Code (IBR... Code or the ASTM standard to which the material is manufactured. (3) The maximum design stress at any...

49 CFR 178.345-3 - Structural integrity.

Code of Federal Regulations, 2011 CFR

2011-10-01

... acceptance criteria. (1) The maximum calculated design stress at any point in the cargo tank wall may not exceed the maximum allowable stress value prescribed in Section VIII of the ASME Code (IBR, see § 171.7... Code or the ASTM standard to which the material is manufactured. (3) The maximum design stress at any...

30 CFR 36.44 - Maximum allowable fuel : air ratio.

Code of Federal Regulations, 2012 CFR

2012-07-01

... delivered to MSHA with the fuel-injection system adjusted by the applicant and tests of the exhaust-gas... adjustment of the fuel-injection system shall be accepted. The maximum fuel : air ratio determined from the... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Maximum allowable fuel : air ratio. 36.44...

30 CFR 36.44 - Maximum allowable fuel : air ratio.

Code of Federal Regulations, 2013 CFR

2013-07-01

... delivered to MSHA with the fuel-injection system adjusted by the applicant and tests of the exhaust-gas... adjustment of the fuel-injection system shall be accepted. The maximum fuel : air ratio determined from the... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Maximum allowable fuel : air ratio. 36.44...

30 CFR 36.44 - Maximum allowable fuel : air ratio.

Code of Federal Regulations, 2010 CFR

2010-07-01

... delivered to MSHA with the fuel-injection system adjusted by the applicant and tests of the exhaust-gas... adjustment of the fuel-injection system shall be accepted. The maximum fuel : air ratio determined from the... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum allowable fuel : air ratio. 36.44...

30 CFR 36.44 - Maximum allowable fuel:air ratio.

Code of Federal Regulations, 2014 CFR

2014-07-01

... delivered to MSHA with the fuel-injection system adjusted by the applicant and tests of the exhaust-gas... adjustment of the fuel-injection system shall be accepted. The maximum fuel:air ratio determined from the... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Maximum allowable fuel:air ratio. 36.44 Section...

30 CFR 36.44 - Maximum allowable fuel : air ratio.

Code of Federal Regulations, 2011 CFR

2011-07-01

... delivered to MSHA with the fuel-injection system adjusted by the applicant and tests of the exhaust-gas... adjustment of the fuel-injection system shall be accepted. The maximum fuel : air ratio determined from the... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Maximum allowable fuel : air ratio. 36.44...

Exploiting the Maximum Entropy Principle to Increase Retrieval Effectiveness.

ERIC Educational Resources Information Center

Cooper, William S.

1983-01-01

Presents information retrieval design approach in which queries of computer-based system consist of sets of terms, either unweighted or weighted with subjective term precision estimates, and retrieval outputs ranked by probability of usefulness estimated by "maximum entropy principle." Boolean and weighted request systems are discussed.…

Study & report to Congress : applicability of maximum axle weight limitations to over-the-road and public transit buses

DOT National Transportation Integrated Search

2003-12-01

The Senate Report on the Fiscal Year (FY) 2002 U.S. Department of Transportation : (DOT) appropriations bill requested that the Department conduct a study and submit to : Congress a report on the applicability of Federal maximum weight limitations to...

41 CFR 302-7.2 - What is the maximum weight of HHG that may be transported or stored at Government expense?

Code of Federal Regulations, 2010 CFR

2010-07-01

... STORAGE OF PROPERTY 7-TRANSPORTATION AND TEMPORARY STORAGE OF HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) General Rules § 302-7.2 What is the maximum weight of HHG that may be...

14 CFR 23.733 - Tires.

Code of Federal Regulations, 2010 CFR

2010-01-01

... approved for such tires) equal to the corresponding static ground reaction under the design maximum weight... rating approved for such tires) equal to the reaction obtained at the nose wheel, assuming the mass of... downward and 0.31 W forward (where W is the design maximum weight), with the reactions distributed to the...

14 CFR 23.733 - Tires.

Code of Federal Regulations, 2011 CFR

2011-01-01

... approved for such tires) equal to the corresponding static ground reaction under the design maximum weight... rating approved for such tires) equal to the reaction obtained at the nose wheel, assuming the mass of... downward and 0.31 W forward (where W is the design maximum weight), with the reactions distributed to the...

14 CFR 23.77 - Balked landing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... reciprocating engine-powered and single engine turbine powered airplane of more than 6,000 pounds maximum weight, and multiengine turbine engine-powered airplane of 6,000 pounds or less maximum weight in the normal... of movement of the power controls from minimum flight-idle position; (2) The landing gear extended...

14 CFR 23.77 - Balked landing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... reciprocating engine-powered and single engine turbine powered airplane of more than 6,000 pounds maximum weight, and multiengine turbine engine-powered airplane of 6,000 pounds or less maximum weight in the normal... of movement of the power controls from minimum flight-idle position; (2) The landing gear extended...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2010 CFR

2010-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2014 CFR

2014-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2012 CFR

2012-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2013 CFR

2013-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2011 CFR

2011-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

Effect of sex and carcass weight on sensory quality of goat meat of Cabrito Transmontano.

PubMed

Rodrigues, S; Teixeira, A

2009-02-01

The main purpose of this work was the characterization of Cabrito Transmontana goat kid carcass and meat, which is a Protected Origin Designation product. The effects of sex and carcass weight were studied. Sensory attributes of toughness, juiciness, flavor intensity, flavor quality, odor intensity, fiber presence (stringy), sweet intensity, and overall acceptability were evaluated in 60 males and females allocated to 3 carcass weight groups: 4, 6, and 8 kg. Sensory quality of meat was evaluated by a trained taste panel of 11 experts in 5 sessions. Generalized Procrustes analysis was performed, and 93% of total variability was explained by the 2 first factors (axes). Correlation between sensory traits and factors 1 and 2 allowed the factors to be renamed as toughness/aroma and juiciness/acceptability, respectively. Procrustes analysis indicated that a sex effect was detected by experts. Meat from males presented greater juiciness, flavor quality, and general acceptability than did meat from females. Cabrito Transmontano Protected Origin Designation includes animals from 4 to 9 kg of carcass weight. However, differences among them can be important, because the taste panel found differences between animals from distinct carcass weight ranges. Lighter weight carcasses were considered more tender with less flavor and odor intensity than heavier carcasses.

46 CFR 189.35-90 - Weight handling gear manufactured prior to March 1, 1968.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Weight Handling Gear § 189.35-90 Weight handling..., will be accepted on the basis of appropriate tests and examinations should plans or other technical...

Ground reaction forces during level ground walking with body weight unloading

PubMed Central

Barela, Ana M. F.; de Freitas, Paulo B.; Celestino, Melissa L.; Camargo, Marcela R.; Barela, José A.

2014-01-01

Background: Partial body weight support (BWS) systems have been broadly used with treadmills as a strategy for gait training of individuals with gait impairments. Considering that we usually walk on level ground and that BWS is achieved by altering the load on the plantar surface of the foot, it would be important to investigate some ground reaction force (GRF) parameters in healthy individuals walking on level ground with BWS to better implement rehabilitation protocols for individuals with gait impairments. Objective: To describe the effects of body weight unloading on GRF parameters as healthy young adults walked with BWS on level ground. Method: Eighteen healthy young adults (27±4 years old) walked on a walkway, with two force plates embedded in the middle of it, wearing a harness connected to a BWS system, with 0%, 15%, and 30% BWS. Vertical and horizontal peaks and vertical valley of GRF, weight acceptance and push-off rates, and impulse were calculated and compared across the three experimental conditions. Results: Overall, participants walked more slowly with the BWS system on level ground compared to their normal walking speed. As body weight unloading increased, the magnitude of the GRF forces decreased. Conversely, weight acceptance rate was similar among conditions. Conclusions: Different amounts of body weight unloading promote different outputs of GRF parameters, even with the same mean walk speed. The only parameter that was similar among the three experimental conditions was the weight acceptance rate. PMID:25590450

Selective Effects of Training Against Weight and Inertia on Muscle Mechanical Properties.

PubMed

Djuric, Sasa; Cuk, Ivan; Sreckovic, Sreten; Mirkov, Dragan; Nedeljkovic, Aleksandar; Jaric, Slobodan

2016-10-01

To explore the effects of training against mechanically different types of loads on muscle force (F), velocity (V), and power (P) outputs. Subjects practiced maximum bench throws over 8 wk against a bar predominantly loaded by approximately constant external force (weight), weight plates (weight plus inertia), or weight plates whose weight was compensated by a constant external force pulling upward (inertia). Instead of a typically applied single trial performed against a selected load, the pretest and posttest consisted of the same task performed against 8 different loads ranging from 30% to 79% of the subject's maximum strength applied by adding weight plates to the bar. That provided a range of F and V data for subsequent modeling by linear F-V regression revealing the maximum F (F-intercept), V (V-intercept), and P (P = FV/4). Although all 3 training conditions resulted in increased P, the inertia type of the training load could be somewhat more effective than weight. An even more important finding was that the P increase could be almost exclusively based on a gain in F, V, or both when weight, inertia, or weight-plus-inertia training load were applied, respectively. The inertia training load is more effective than weight in increasing P and weight and inertia may be applied for selective gains in F and V, respectively, whereas the linear F-V model obtained from loaded trials could be used for discerning among muscle F, V, and P.

Increasing the use of preventative health services to promote healthy eating, physical activity and weight management: the acceptability and potential effectiveness of a proactive telemarketing approach

PubMed Central

2012-01-01

Background Telephone based interventions are effective in promoting health behaviours. The use of telephone based support services to promote healthy eating, activity or weight loss, however, are currently under-utilised. The aim of this study was to assess the acceptability and potential effectiveness of a telemarketing approach in increasing community use of proactive services to encourage healthy eating, physical activity and weight loss. Methods The study employed a cross sectional design. Eligible consenting participants completed a 15 minute telephone survey conducted by trained telephone interviewers using computer assisted telephone interviewing technology. Results Overall, 87% of participants considered it acceptable for a health service to contact people by telephone to offer assistance to help them lose weight, eat healthily or be more physically active. Among participants with inadequate fruit and vegetable intake, physical activity or who were overweight, 64%, 54% and 61% respectively reported that they would use one or more of the proactive support services offered. Females and those from non -English speaking households who did not eat sufficient serves were significantly more likely to report that they would use support services. Conclusions The findings suggest that proactive telemarketing of health services to facilitate healthy eating, physical activity or weight loss is considered highly acceptable and may be effective in encouraging service use by more than half of all adults with these behavioural risks. PMID:23134686

Weight compensation characteristics of Armeo®Spring exoskeleton: implications for clinical practice and research.

PubMed

Perry, Bonnie E; Evans, Emily K; Stokic, Dobrivoje S

2017-02-17

Armeo®Spring exoskeleton is widely used for upper extremity rehabilitation; however, weight compensation provided by the device appears insufficiently characterized to fully utilize it in clinical and research settings. Weight compensation was quantified by measuring static force in the sagittal plane with a load cell attached to the elbow joint of Armeo®Spring. All upper spring settings were examined in 5° increments at the minimum, maximum, and two intermediate upper and lower module length settings, while keeping the lower spring at minimum. The same measurements were made for minimum upper spring setting and maximum lower spring setting at minimum and maximum module lengths. Weight compensation was plotted against upper module angles, and slope was analyzed for each condition. The Armeo®Spring design prompted defining the slack angle and exoskeleton balance angle, which, depending on spring and length settings, divide the operating range into different unloading and loading regions. Higher spring tensions and shorter module lengths provided greater unloading (≤6.32 kg of support). Weight compensation slope decreased faster with shorter length settings (minimum length = -0.082 ± 0.002 kg/°; maximum length = -0.046 ± 0.001 kg/°) independent of spring settings. Understanding the impact of different settings on the Armeo®Spring weight compensation should help define best clinical practice and improve fidelity of research.

Acceptability and Efficacy of Locally Produced Ready-to-Use Therapeutic Food Nutreal in the Management of Severe Acute Malnutrition in Comparison With Defined Food.

PubMed

Thapa, Babu Ram; Goyal, Pooja; Menon, Jagadeesh; Sharma, Ajay

2017-01-01

Severe acute malnutrition (SAM) is a salient health problem in India. Federation of Indian Chamber of Commerce and Industry (FICCI) Research and Analysis Centre, New Delhi, prepared nutreal equivalent to ready-to-use therapeutic food by World Health Organization (WHO) for the management of SAM and defined food like homemade diet. To compare acceptability and efficacy of nutreal over defined food for the management of SAM. One hundred twelve children aged less than 5 years with SAM were enrolled as per the standard of WHO. Children were randomized into 2 groups to receive nutreal (n = 56) and defined food (n = 56) in unlimited amounts for 42 consecutive days and extended by 2 weeks as per demand. Calorie and protein intake, weight, and mid-upper arm circumference (MUAC) were recorded daily. Age range was 8 to 45 months. Ninety-three percent of children eagerly accepted nutreal but 7% does not. Whereas in the defined food group, 68% accepted eagerly, 30% did not accept eagerly, and 1.8% accepted poorly ( P = .004). At enrollment, mean weight in the nutreal group was 6.44 ± 1.60 kg and in the defined food group was 8.69 ± 1.76 kg, with MUAC in the nutreal group being 11.12 ± 0.47 cm and in the defined food group being 11.54 ± 0.34 cm. Mean weight in the nutreal and defined food groups at eighth week of intervention was 7.97 ± 1.8 kg and 9.71 ± 1.8 kg ( P < .001), respectively. Mid-upper arm circumference at eighth week was 12.10 ± 0.29 cm in the nutreal group and 12.49 ± 0.50 cm in the defined group ( P < .001). Acceptability, mean weight gain, and MUAC in the nutreal group are greater than the defined food.

Alternative Fuels Data Center

Science.gov Websites

gross vehicle weight limits by a weight equal to the difference between the average weight of the diesel tank and fueling system. The NGV maximum gross weight may not exceed 82,000 pounds. (Reference

Alternative Fuels Data Center

Science.gov Websites

the state's gross vehicle weight limits by a weight equal to the difference between the weight of the tank and fueling system. The NGV maximum gross weight may not exceed 82,000 pounds. (Reference Senate

The Effects of 24 weeks of Resistance Training with Simultaneous Elastic and Free Weight Loading on Muscular Performance of Novice Lifters.

PubMed

Shoepe, Todd C; Ramirez, David A; Rovetti, Robert J; Kohler, David R; Almstedt, Hawley C

2011-09-01

The purpose of this investigation was to assess the effectiveness of variable resistance as provided through elastic plus free weight techniques in college aged males and females. Twenty novice lifters were randomly assigned to a traditional free weight only (6 males and 5 females) or elastic band plus free weight group (5 males and 5 females) and 9 more normally active controls (5 males and 4 females), were recruited to maintain normal activity for the duration of the study. No differences existed between control, free weight and elastic band at baseline for age, body height, body mass, body mass index, and body fat percentage. One-repetition maximums were performed for squat and bench press while both strength and power were assessed using isokinetic dynamometry. Elastic groups and free-weight groups completed 24 weeks of whole body, periodized, high intensity resistance (65-95% of one-repetition maximum) training three times/week. Training programs were identical except that the elastic group trained the barbell squat, bench press and stiff-legged deadlift with 20-35% of their total prescribed training loads coming from band resistance (assessed at the top of the range of motion) with the remainder from free weight resistance. A mixed-model analysis revealed that peak torque, average power and one-repetition maximums for squat were significantly greater after training for the elastic group compared to the control (p<0.05). In addition, the free weight group also showed significantly greater improvements over the control in peak torque and one-repetition maximums for squat and bench press. No significant differences were observed between the elastic band and free weight groups. Combined variable elastic band plus free weight exercises are effective at increasing strength and power similar to free-weights alone in novice college aged males and females. However, due to complexity in set-up and load assignment elastic adoption by novice lifters in an unsupervised situation is not advised.

Equivalent charge source model based iterative maximum neighbor weight for sparse EEG source localization.

PubMed

Xu, Peng; Tian, Yin; Lei, Xu; Hu, Xiao; Yao, Dezhong

2008-12-01

How to localize the neural electric activities within brain effectively and precisely from the scalp electroencephalogram (EEG) recordings is a critical issue for current study in clinical neurology and cognitive neuroscience. In this paper, based on the charge source model and the iterative re-weighted strategy, proposed is a new maximum neighbor weight based iterative sparse source imaging method, termed as CMOSS (Charge source model based Maximum neighbOr weight Sparse Solution). Different from the weight used in focal underdetermined system solver (FOCUSS) where the weight for each point in the discrete solution space is independently updated in iterations, the new designed weight for each point in each iteration is determined by the source solution of the last iteration at both the point and its neighbors. Using such a new weight, the next iteration may have a bigger chance to rectify the local source location bias existed in the previous iteration solution. The simulation studies with comparison to FOCUSS and LORETA for various source configurations were conducted on a realistic 3-shell head model, and the results confirmed the validation of CMOSS for sparse EEG source localization. Finally, CMOSS was applied to localize sources elicited in a visual stimuli experiment, and the result was consistent with those source areas involved in visual processing reported in previous studies.

40 CFR 600.007 - Vehicle acceptability.

Code of Federal Regulations, 2014 CFR

2014-07-01

... a different maximum value for electric vehicles, plug-in hybrid electric vehicles, and fuel cell... 600.007 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL... Administrator will judge the acceptability of a fuel economy data vehicle on the basis of the information...

40 CFR 600.007 - Vehicle acceptability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... a different maximum value for electric vehicles, plug-in hybrid electric vehicles, and fuel cell... 600.007 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL... Administrator will judge the acceptability of a fuel economy data vehicle on the basis of the information...

40 CFR 600.007 - Vehicle acceptability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... a different maximum value for electric vehicles, plug-in hybrid electric vehicles, and fuel cell... 600.007 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL... Administrator will judge the acceptability of a fuel economy data vehicle on the basis of the information...

Factors affecting the acceptability and consumption of Corn Soya Blend Plus as a prenatal dietary supplement among pregnant women in rural Cambodia.

PubMed

Janmohamed, Amynah; Karakochuk, Crystal D; Boungnasiri, Somchit; Whitfield, Kyly C; Chapman, Gwen E; Janssen, Patricia; McLean, Judy; Green, Timothy J

2016-07-01

Undernutrition is prevalent among pregnant women in Cambodia. The provision of fortified dietary supplements is one strategy to help pregnant women meet their nutritional needs. Corn Soya Blend Plus (CSBP) is a widely used prenatal dietary supplement in areas with high rates of undernutrition and food insecurity. However, little is known about its acceptability during pregnancy. The present study aimed to identify factors that affected the acceptability and consumption of CSBP supplements among pregnant women. Women completed a structured interview designed to provide information on facilitators of and barriers to utilization. In addition, six focus groups were conducted with a subset of women (n 70) to further explore attitudes, perceptions and experiences related to CSBP use. Two districts in Kampong Chhnang Province, Cambodia. Pregnant women (n 288) participating in a cluster-randomized trial of CSBP. The acceptability of CSBP was influenced by sensory attributes, family support, peer influences, and attitudes related to diet, nutritional status and weight gain in pregnancy. Attaining adequate nutrition was considered less important than other concerns during pregnancy, particularly anxiety related to the costs of delivery and postpartum care. Acceptance was lower among new mothers due to fears of weight gain. Health benefits were common reasons for continued use and minor side-effects, such as nausea, were not major barriers to consumption. CSBP was generally well accepted in this population. However, organoleptic factors and perceptions regarding nutrition and weight gain in pregnancy, particularly for first-time mothers, were barriers to increasing acceptance among Cambodian women.

Dietary adherence and acceptability of five different diets, including vegan and vegetarian diets, for weight loss: The New DIETs study.

PubMed

Moore, Wendy J; McGrievy, Michael E; Turner-McGrievy, Gabrielle M

2015-12-01

The goal of the present study was to examine dietary adherence and acceptability among participants from the New DIETs study who were randomized to one of four plant-based diets (vegan, vegetarian, pesco-vegetarian, semi-vegetarian) or an omnivore diet. Primary outcomes at two- and six months included dietary adherence (24-hour dietary recalls), weight loss and changes in animal product intake (mg cholesterol) by adherence status, Three-Factor Eating Questionnaire (TFEQ), Power of Food Scale (PFS), dietary acceptability (Food Acceptability Questionnaire), and impact of diet preference on adherence. No differences were found in dietary adherence or changes in FAQ, TFEQ, or PFS among the groups. At six months, non-adherent vegan and vegetarian participants (n=16) had a significantly greater decrease in cholesterol intake (-190.2 ± 199.2 mg) than non-adherent pesco-vegetarian/semi-vegetarian (n=15, -2.3 ± 200.3 mg, P=0.02) or omnivore participants (n=7, 17.0 ± 36.0, P=0.04). Non-adherent vegan/vegetarian participants lost significantly more weight at six months (-6.0 ± 6.7%) than non-adherent omnivore participants (-0.4 ± 0.6%, P=0.04). Dietary preference had no impact on adherence at six months. Due to equal rates of adherence and acceptability among the diet groups, instructing participants to follow vegan or vegetarian diets may have a greater impact on weight loss and animal product intake than providing instruction in more moderate approaches even among non-adherent participants. Copyright © 2015 Elsevier Ltd. All rights reserved.

14 CFR 23.1583 - Operating limitations.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) The maximum zero wing fuel weight, where relevant, as established in accordance with § 23.343. (d... passenger seating configuration. The maximum passenger seating configuration. (k) Allowable lateral fuel loading. The maximum allowable lateral fuel loading differential, if less than the maximum possible. (l...

Safety of 8-weeks oral administration of Arctium lappa L.

PubMed Central

Bok, So-Hyeon; Cho, Seung Sik; Bae, Chun-Sik

2017-01-01

Recently, worldwide dietary reference intakes have been considered an important guideline for public health. Some governments and the World Health Organization (WHO) provide guidelines concerning dietary intake. Although an ingredient may have a history of use as a culinary material, changes in the environment over time suggest that the acceptable maximum intake each of food/culinary material should be regularly evaluated. Arctium lappa L. has been used as a culinary material for many centuries in Korea and Japan and some recent studies have reported related therapeutic effects. However, there are no reports on the safety of repeated oral administration. In this study, we evaluated the safety of a 8-weeks repeated oral intake of A. lappa. We concluded that treatment with <250 mg/kg A. lappa, which was within the safety range, resulted in body weight decrease and blood glucose suppression. PMID:29046701

A comparison of peak power in the shoulder press and shoulder throw.

PubMed

Dalziel, W M; Neal, R J; Watts, M C

2002-09-01

The ability to generate peak power is central for performance in many sports. Currently two distinct resistance training methods are used to develop peak power, the heavy weight/slow velocity and light weight/fast velocity regimes. When using the light weight/fast velocity power training method it was proposed that peak power would be greater in a shoulder throw exercise compared with a normal shoulder press. Nine males performed three lifts in the shoulder press and shoulder throw at 30% and 40% of their one repetition maximum (1RM). These lifts were performed identically, except for the release of the bar in the throw condition. A potentiometer attached to the bar measured displacement and duration of the lifts. The time of bar release in the shoulder throw was determined with a pressure switch. ANOVA was used to examine statistically significant differences where the level of acceptance was set at p < 0.05. Peak power was found to be significantly greater in the shoulder throw at 30% of 1 RM condition [F, (1, 23) = 2.325 p < 0.051 and at 40% of 1 RM [F, (1, 23) = 2.905 p < 0.05] compared to values recorded for the respective shoulder presses. Peak power was also greater in the 30% of 1 RM shoulder throw (510 +/- 103W) than in the 40% of 1 RM shoulder press (471 +/- 96W). Peak power was produced significantly later in the shoulder throw versus the shoulder press. This differing power reflected a greater bar velocity of the shoulder throw at both assigned weights compared with the shoulder press.

Weighted Maximum-a-Posteriori Estimation in Tests Composed of Dichotomous and Polytomous Items

ERIC Educational Resources Information Center

Sun, Shan-Shan; Tao, Jian; Chang, Hua-Hua; Shi, Ning-Zhong

2012-01-01

For mixed-type tests composed of dichotomous and polytomous items, polytomous items often yield more information than dichotomous items. To reflect the difference between the two types of items and to improve the precision of ability estimation, an adaptive weighted maximum-a-posteriori (WMAP) estimation is proposed. To evaluate the performance of…

Applying a Weighted Maximum Likelihood Latent Trait Estimator to the Generalized Partial Credit Model

ERIC Educational Resources Information Center

Penfield, Randall D.; Bergeron, Jennifer M.

2005-01-01

This article applies a weighted maximum likelihood (WML) latent trait estimator to the generalized partial credit model (GPCM). The relevant equations required to obtain the WML estimator using the Newton-Raphson algorithm are presented, and a simulation study is described that compared the properties of the WML estimator to those of the maximum…

21 CFR 123.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... acceptable levels. (c) Critical limit means the maximum or minimum value to which a physical, biological, or... acceptable level the occurrence of the identified food safety hazard. (d) Fish means fresh or saltwater... used to indicate conditions during processing at a critical control point. (k)(1) Processing means...

Assessment of the Physicochemical Quality of Drinking Water Resources in the Central Part of Iran.

PubMed

Nikaeen, Mahnaz; Shahryari, Ali; Hajiannejad, Mehdi; Saffari, Hossein; Kachuei, Zahra Moosavian; Hassanzadeh, Akbar

2016-01-01

The aim of the study described in this article was to assess the physicochemical quality of water resources in Isfahan province, located in the central part of Iran, from June to November 2012. Comparison of the results with the acceptable limits recommended by the World Health Organization (WHO) for drinking water showed that nitrate, chloride, iron, and fluoride concentrations exceeded the maximum acceptable level in 12.3%, 9.2%, 6.8%, and 1.5% of samples, respectively. Total dissolved solids (TDS) and turbidity values also exceeded the maximum acceptable level in 9.2% and 3.1% of samples, respectively. In general, the quality of drinking water resources in the central part of Iran at present is mostly acceptable and satisfactory. It may be deteriorated in the future, however, because water quantity and quality in arid and semiarid areas are highly variable over time. Therefore, continued monitoring of the water resources quality is extremely important to environmental safety.

The relationship between leg preference and knee mechanics during sidestepping in collegiate female footballers.

PubMed

Brown, Scott R; Wang, Henry; Dickin, D Clark; Weiss, Kaitlyn J

2014-11-01

This study examined the relationship between leg preference and knee mechanics in females during sidestepping. Three-dimensional data were recorded on 16 female collegiate footballers during a planned 45° sidestep manoeuvre with their preferred and non-preferred kicking leg. Knee kinematics and kinetics during initial contact, weight acceptance, peak push-off, and final push-off phases of sidestepping were analysed in both legs. The preferred leg showed trivial to small increases (ES = 0.19-0.36) in knee flexion angle at initial contact, weight acceptance, and peak push-off, and small increases (ES = 0.21-0.34) in peak power production and peak knee extension velocity. The non-preferred leg showed a trivial increase (ES = 0.10) in knee abduction angle during weight acceptance; small to moderate increases (ES = 0.22-0.64) in knee internal rotation angle at weight acceptance, peak push-off, and final push-off; a small increase (ES = 0.22) in knee abductor moment; and trivial increases (ES = 0.09-0.14) in peak power absorption and peak knee flexion velocity. The results of this study show that differences do exist between the preferred and non-preferred leg in females. The findings of this study will increase the knowledge base of anterior cruciate ligament injury in females and can aid in the design of more appropriate neuromuscular, plyometric, and strength training protocols for injury prevention.

Blade size and weight effects in shovel design.

PubMed

Freivalds, A; Kim, Y J

1990-03-01

The shovel is a basic tool that has undergone only nominal systematic design changes. Although previous studies found shovel-weight and blade-size effects of shovelling, the exact trade-off between the two has not been quantified. Energy expenditure, heart rate, ratings of perceived exertion and shovelling performance were measured on five subjects using five shovels with varying blade sizes and weights to move sand. Energy expenditure, normalised to subject weight and load handled, varied quadratically with the blade-size/shovel-weight (B/W) ratio. Minimum energy cost was at B/W = 0.0676 m2/kg, which for an average subject and average load would require an acceptable 5.16 kcal/min of energy expenditure. Subjects, through the ratings of perceived exertion, also strongly preferred the lighter shovels without regard to blade size. Too large a blade or too heavy a shovel increased energy expenditure beyond acceptable levels, while too small a blade reduced efficiency of the shovelling.

Afterschool Program Participation and the Development of Child Obesity and Peer Acceptance

ERIC Educational Resources Information Center

Mahoney, Joseph L.; Lord, Heather; Carryl, Erica

2005-01-01

This longitudinal study assessed the role of afterschool program (ASP) participation in the development of child obesity and peer acceptance in a sample of 439 children. Most participants lived in poverty and were Hispanic or African American. Measurements of height and weight determined obesity status and peer acceptance was assessed through…

Alternative Fuels Data Center

Science.gov Websites

Natural Gas Vehicle (NGV) Weight Exemption A NGV may exceed the state's gross vehicle weight limits maximum gross weight may not exceed 82,000 pounds. (Reference Senate Bill 3616, 2018)

Temperature and molecular-weight dependences of acoustic behaviors of polystyrene studied using Brillouin spectroscopy

NASA Astrophysics Data System (ADS)

Oh, Soo Han; Lee, Byoung Wan; Ko, Jae-Hyeon; Lee, Hyeonju; Park, Jaehoon; Ko, Young Ho; Kim, Kwang Joo

2017-04-01

The acoustic properties of three polystyrene polymers with different molecular weights were investigated as a function of temperature by using Brillouin light scattering. The longitudinal sound velocity showed a change in the slope, which depended on the molecular weight, at the glass transition temperature. The absorption coefficient exhibited a maximum above the glass transition temperature, and the maximum temperature became higher as the molecular weight was increased. Comparison with previous acoustic studies on polystyrene indicate that a substantial frequency dispersion caused by strong coupling between the longitudinal acoustic waves and the segmental motions exists in the high-temperature range.

Application of the threshold of toxicological concern approach for the safety evaluation of calendula flower (Calendula officinalis) petals and extracts used in cosmetic and personal care products.

PubMed

Re, T A; Mooney, D; Antignac, E; Dufour, E; Bark, I; Srinivasan, V; Nohynek, G

2009-06-01

Calendula flower (Calendula officinalis) (CF) has been used in herbal medicine because of its anti-inflammatory activity. CF and C. officinalis extracts (CFE) are used as skin conditioning agents in cosmetics. Although data on dermal irritation and sensitization of CF and CFE's are available, the risk of subchronic systemic toxicity following dermal application has not been evaluated. The threshold of toxicological concern (TTC) is a pragmatic, risk assessment based approach that has gained regulatory acceptance for food and has been recently adapted to address cosmetic ingredient safety. The purpose of this paper is to determine if the safe use of CF and CFE can be established based upon the TTC class for each of its known constituents. For each constituent, the concentration in the plant, the molecular weight, and the estimated skin penetration potential were used to calculate a maximal daily systemic exposure which was then compared to its corresponding TTC class value. Since the composition of plant extracts are variable, back calculation was used to determine the maximum acceptable concentration of a given constituent in an extract of CF. This paper demonstrates the utility and practical application of the TTC concept when used as a tool in the safety evaluation of botanical extracts.

Optimization of Culture Conditions for Enrichment of Saccharomyces cerevisiae with Dl-α-Tocopherol by Response Surface Methodology.

PubMed

Mohajeri Amiri, Morteza; Fazeli, Mohammad Reza; Amini, Mohsen; Hayati Roodbari, Nasim; Samadi, Nasrin

2017-01-01

Designing enriched probiotic supplements may have some advantages including protection of probiotic microorganism from oxidative destruction, improving enzyme activity of the gastrointestinal tract, and probably increasing half-life of micronutrient. In this study Saccharomyces cerevisiae enriched with dl-α-tocopherol was produced as an accumulator and transporter of a lipid soluble vitamin for the first time. By using one variable at the time screening studies, three independent variables were selected. Optimization of the level of dl-α-tocopherol entrapment in S. cerevisiae cells was performed by using Box-Behnken design via design expert software. A modified quadratic polynomial model appropriately fit the data. The convex shape of three-dimensional plots reveal that we could calculate the optimal point of the response in the range of parameters. The optimum points of independent parameters to maximize the response were dl-α-tocopherol initial concentration of 7625.82 µg/mL, sucrose concentration of 6.86 % w/v, and shaking speed of 137.70 rpm. Under these conditions, the maximum level of dl-α-tocopherol in dry cell weight of S. cerevisiae was 5.74 µg/g. The resemblance between the R-squared and adjusted R-squared and acceptable value of C.V% revealed acceptability and accuracy of the model.

Research in the Optical Sciences

DTIC Science & Technology

2011-03-21

concentrators are often characterized by an acceptance angle. Typically, the acceptance angle is specified in the following way. The optical throughput...function of the angle between the incident sunlight and the optical axis of the concentrator . The optical throughput is highest for an incident...shown that the maximum possible acceptance angle is given by max 1arcsin C        , where C is the optical concentration [2

Longitudinal performance of a surgically implanted neuroprosthesis for lower-extremity exercise, standing, and transfers after spinal cord injury.

PubMed

Triolo, Ronald J; Bailey, Stephanie Nogan; Miller, Michael E; Rohde, Loretta M; Anderson, James S; Davis, John A; Abbas, James J; DiPonio, Lisa A; Forrest, George P; Gater, David R; Yang, Lynda J

2012-05-01

To investigate the longitudinal performance of a surgically implanted neuroprosthesis for lower-extremity exercise, standing, and transfers after spinal cord injury. Case series. Research or outpatient physical therapy departments of 4 academic hospitals. Subjects (N=15) with thoracic or low cervical level spinal cord injuries who had received the 8-channel neuroprosthesis for exercise and standing. After completing rehabilitation with the device, the subjects were discharged to unrestricted home use of the system. A series of assessments were performed before discharge and at a follow-up appointment approximately 1 year later. Neuroprosthesis usage, maximum standing time, body weight support, knee strength, knee fatigue index, electrode stability, and component survivability. Levels of maximum standing time, body weight support, knee strength, and knee fatigue index were not statistically different from discharge to follow-up (P>.05). Additionally, neuroprosthesis usage was consistent with subjects choosing to use the system on approximately half of the days during each monitoring period. Although the number of hours using the neuroprosthesis remained constant, subjects shifted their usage to more functional standing versus more maintenance exercise, suggesting that the subjects incorporated the neuroprosthesis into their lives. Safety and reliability of the system were demonstrated by electrode stability and a high component survivability rate (>90%). This group of 15 subjects is the largest cohort of implanted lower-extremity neuroprosthetic exercise and standing system users. The safety and efficiency data from this group, and acceptance of the neuroprosthesis as demonstrated by continued usage, indicate that future efforts toward commercialization of a similar device may be warranted. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Stress analysis on passenger deck due to modification from passenger ship to vehicle-carrying ship

NASA Astrophysics Data System (ADS)

Zubaydi, A.; Sujiatanti, S. H.; Hariyanto, T. R.

2018-03-01

Stress is a basic concept in learning about material mechanism. The main focus that needs to be brought to attention in analyzing stress is strength, which is the structural capacity to carry or distribute loads. The structural capacity not only measured by comparing the maximum stress with the material’s yield strength but also with the permissible stress required by the Indonesian Classification Bureau (BKI), which certainly makes it much safer. This final project analyzes stress in passenger deck that experiences modification due to load changes, from passenger load to vehicle one, carrying: 6-wheels truck with maximum weight of 14 tons, a passenger car with maximum weight of 3.5 tons, and a motorcycle with maximum weight of 0.4 tons. The deck structure is modelled using finite element software. The boundary conditions given to the structural model are fix and simple constraint. The load that works on this deck is the deck load which comes from the vehicles on deck with three vehicles’ arrangement plans. After that, software modelling is conducted for analysis purpose. Analysis result shows a variation of maximum stress that occurs i.e. 135 N/mm2, 133 N/mm2, and 152 N/mm2. Those maximum stresses will not affect the structure of passenger deck’s because the maximum stress that occurs indicates smaller value compared to the Indonesian Classification Bureau’s permissible stress (175 N/mm2) as well as the material’s yield strength (235 N/mm2). Thus, the structural strength of passenger deck is shown to be capable of carrying the weight of vehicles in accordance with the three vehicles’ arrangement plans.

"Guys, She's Humongous!": Gender and Weight-Based Teasing in Adolescence

ERIC Educational Resources Information Center

Taylor, Nicole L.

2011-01-01

Ethnographic research, including individual interviews, focus groups, and participant observation, was conducted to examine how adolescents defined and negotiated the boundaries between normal/acceptable weight and overweight through direct and indirect teasing. In particular, this article focuses on gender differences in weight-based teasing and…

Lod scores for gene mapping in the presence of marker map uncertainty.

PubMed

Stringham, H M; Boehnke, M

2001-07-01

Multipoint lod scores are typically calculated for a grid of locus positions, moving the putative disease locus across a fixed map of genetic markers. Changing the order of a set of markers and/or the distances between the markers can make a substantial difference in the resulting lod score curve and the location and height of its maximum. The typical approach of using the best maximum likelihood marker map is not easily justified if other marker orders are nearly as likely and give substantially different lod score curves. To deal with this problem, we propose three weighted multipoint lod score statistics that make use of information from all plausible marker orders. In each of these statistics, the information conditional on a particular marker order is included in a weighted sum, with weight equal to the posterior probability of that order. We evaluate the type 1 error rate and power of these three statistics on the basis of results from simulated data, and compare these results to those obtained using the best maximum likelihood map and the map with the true marker order. We find that the lod score based on a weighted sum of maximum likelihoods improves on using only the best maximum likelihood map, having a type 1 error rate and power closest to that of using the true marker order in the simulation scenarios we considered. Copyright 2001 Wiley-Liss, Inc.

47 CFR 76.975 - Commercial leased access dispute resolution.

Code of Federal Regulations, 2013 CFR

2013-10-01

... cable operator's maximum permitted rate from an independent accountant prior to filing a petition for... days to agree on a mutually acceptable accountant from the date on which the programmer provides the... agree on a mutually acceptable accountant within five business days of the programmer's request for a...

47 CFR 76.975 - Commercial leased access dispute resolution.

Code of Federal Regulations, 2014 CFR

2014-10-01

... cable operator's maximum permitted rate from an independent accountant prior to filing a petition for... days to agree on a mutually acceptable accountant from the date on which the programmer provides the... agree on a mutually acceptable accountant within five business days of the programmer's request for a...

Alternatives to Weight Tolerance Permits

DOT National Transportation Integrated Search

2000-10-01

A complex web of government regulations in the United States establishes maximum weights for vehicles on public roads. The primary purpose is to ensure compatibility of roadway design and operations with vehicle weight and dimensions. Of particular c...

33 CFR 183.41 - Persons capacity: Outboard boats.

Code of Federal Regulations, 2010 CFR

2010-07-01

... § 183.35 for the boat minus the motor and control weight, battery weight (dry), and full portable fuel... control weight, battery weight, and full portable fuel tank weight, if any, shown in table 4 of subpart H of this part for the maximum horsepower capacity marked on the boat. Permanently installed fuel tanks...

The double stigma of obesity and serious mental illnesses: promoting health and recovery.

PubMed

Mizock, Lauren

2012-12-01

This article contrasts the traditional medical approach and size acceptance perspectives on obesity among people with serious mental illnesses. Higher incidences of obesity among populations with serious mental illnesses have been identified. In response, a recent initiative in mental health has urged providers to address the obesity rates among populations with mental illnesses by monitoring weight, prescribing weight loss medication, and recommending bariatric surgery. However, literature is emerging with regards to the double stigma experienced by individuals with obesity and a mental illness. Therefore, the traditional focus on weight loss can benefit from a size acceptance approach to focus on health promotion and avoid stigmatizing size. Citations of theoretical and behavioral health literature on the experiences of individuals with mental illnesses and obesity are presented. Recommendations for interventions, training, and future research related to obesity and mental illnesses are provided. Implications are suggested for a size acceptance approach to interventions for individuals in recovery from mental illnesses to promote health at every size within mental health and medical settings.

A critical assessment of two types of personal UV dosimeters.

PubMed

Seckmeyer, Gunther; Klingebiel, Marcus; Riechelmann, Stefan; Lohse, Insa; McKenzie, Richard L; Liley, J Ben; Allen, Martin W; Siani, Anna-Maria; Casale, Giuseppe R

2012-01-01

Doses of erythemally weighted irradiances derived from polysulphone (PS) and electronic ultraviolet (EUV) dosimeters have been compared with measurements obtained using a reference spectroradiometer. PS dosimeters showed mean absolute deviations of 26% with a maximum deviation of 44%, the calibrated EUV dosimeters showed mean absolute deviations of 15% (maximum 33%) around noon during several test days in the northern hemisphere autumn. In the case of EUV dosimeters, measurements with various cut-off filters showed that part of the deviation from the CIE erythema action spectrum was due to a small, but significant sensitivity to visible radiation that varies between devices and which may be avoided by careful preselection. Usually the method of calibrating UV sensors by direct comparison to a reference instrument leads to reliable results. However, in some circumstances the quality of measurements made with simple sensors may be over-estimated. In the extreme case, a simple pyranometer can be used as a UV instrument, providing acceptable results for cloudless skies, but very poor results under cloudy conditions. It is concluded that while UV dosimeters are useful for their design purpose, namely to estimate personal UV exposures, they should not be regarded as an inexpensive replacement for meteorological grade instruments. © 2011 Wiley Periodicals, Inc. Photochemistry and Photobiology © 2011 The American Society of Photobiology.

Acceptability and potential effectiveness of commercial portion control tools amongst people with obesity.

PubMed

Almiron-Roig, Eva; Domínguez, Angélica; Vaughan, David; Solis-Trapala, Ivonne; Jebb, Susan A

2016-12-01

Exposure to large portion sizes is a risk factor for obesity. Specifically designed tableware may modulate how much is eaten and help with portion control. We examined the experience of using a guided crockery set (CS) and a calibrated serving spoon set (SS) by individuals trying to manage their weight. Twenty-nine obese adults who had completed 7-12 weeks of a community weight-loss programme were invited to use both tools for 2 weeks each, in a crossover design, with minimal health professional contact. A paper-based questionnaire was used to collect data on acceptance, perceived changes in portion size, frequency, and type of meal when the tool was used. Scores describing acceptance, ease of use and perceived effectiveness were derived from five-point Likert scales from which binary indicators (high/low) were analysed using logistic regression. Mean acceptance, ease of use and perceived effectiveness were moderate to high (3·7-4·4 points). Tool type did not have an impact on indicators of acceptance, ease of use and perceived effectiveness (P>0·32 for all comparisons); 55 % of participants used the CS on most days v. 21 % for the SS. The CS was used for all meals, whereas the SS was mostly used for evening meals. Self-selected portion sizes increased for vegetables and decreased for chips and potatoes with both tools. Participants rated both tools as equally acceptable, easy to use and with similar perceived effectiveness. Formal trials to evaluate the impact of such tools on weight control are warranted.

Quantifying women's stated benefit-risk trade-off preferences for IBS treatment outcomes.

PubMed

Johnson, F Reed; Hauber, A Brett; Ozdemir, Semra; Lynd, Larry

2010-01-01

The Food and Drug Administration, currently, is exploring quantitative benefit-risk methods to support regulatory decision-making. A scientifically valid method for assessing patients' benefit-risk trade-off preferences is needed to compare risks and benefits in a common metric. The study aims to quantify the maximum acceptable risk (MAR) of treatment-related adverse events (AEs) that women with diarrhea-predominant irritable bowel syndrome (IBS) are willing to accept in exchange for symptom relief. A stated-choice survey was used to elicit trade-off preferences among constructed treatment profiles, each defined by symptom severity and treatment-related AEs. Symptom attributes included frequency of abdominal pain and discomfort, frequency of diarrhea, and frequency of urgency. AE attributes included frequency of mild-to-moderate constipation and the risk of four possible serious AEs. A Web-enabled survey was administered to 589 female US residents at least 18 years of age with a self-reported diagnosis of diarrhea-predominant IBS. Preference weights and MAR were estimated using mixed-logit methods. SUBJECTS were willing to accept higher risks of serious AEs in return for treatments offering better symptom control. For an improvement from the lowest to the highest of four benefit levels, subjects were willing to tolerate a 2.65% increase in impacted-bowel risk, but only a 1.34% increase in perforated-bowel risk. Variation in MARs across AE types is consistent with the relative seriousness of the AEs. Stated-preference methods offer a scientifically valid approach to quantifying benefit-risk trade-off preferences that can be used to inform regulatory decision-making.

Sea water Corrosion of Nickel based Plasma Spray Coating

NASA Astrophysics Data System (ADS)

Parida, M.; Nanda, S. P.; Bhuyan, S. K.; Mishra, S. C.

2018-03-01

Different types of erosion resistant coatings are applied/deposited on aero components, depending on the operating/working temperatures. Nickel based coating are applied on the air craft (compressor) components, which can sustain up to working temperature of 650°C. In the present investigation, to improve the compatibility between substrate (i.e. the machine component) and the top coat, application of bond coat is there. The application of Nickel based coating by thermal plasma spray technique has proven to be a satisfactory means of producing acceptable sealing surface with excellent abradability. Before the corrosion study, coated sample is subjected to hardness, thickness and porosity testing. Hence the result is being evaluated. The corrosion behavior of coating was studied by sea water immersion with a time period of 16 weeks. It is observed that, up to 9 weeks increase in weight of coating occurs in a sharp trend and then takes a decreasing trend. The weight gain of the samples has varied from 37.23% (with one week immersion in sea water) to a maximum of about 64.36% for six weeks immersion. Coating morphology and composition analysis of the coatings are studied using SEM and EDS. This behavior shows adsorption/deposition of the foreign particles with polygonal shape on the coating surface by sea water interaction. Foreign particles with polygonal shape deposited on the coating and with increase in immersion/treatment time, washing out of the deposited materials starts, which reflects the decreasing trend of weight gain of the specimen.

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2014 CFR

2014-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2013 CFR

2013-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2012 CFR

2012-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2010 CFR

2010-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2011 CFR

2011-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

Quantitative LC-MS of polymers: determining accurate molecular weight distributions by combined size exclusion chromatography and electrospray mass spectrometry with maximum entropy data processing.

PubMed

Gruendling, Till; Guilhaus, Michael; Barner-Kowollik, Christopher

2008-09-15

We report on the successful application of size exclusion chromatography (SEC) combined with electrospray ionization mass spectrometry (ESI-MS) and refractive index (RI) detection for the determination of accurate molecular weight distributions of synthetic polymers, corrected for chromatographic band broadening. The presented method makes use of the ability of ESI-MS to accurately depict the peak profiles and retention volumes of individual oligomers eluting from the SEC column, whereas quantitative information on the absolute concentration of oligomers is obtained from the RI-detector only. A sophisticated computational algorithm based on the maximum entropy principle is used to process the data gained by both detectors, yielding an accurate molecular weight distribution, corrected for chromatographic band broadening. Poly(methyl methacrylate) standards with molecular weights up to 10 kDa serve as model compounds. Molecular weight distributions (MWDs) obtained by the maximum entropy procedure are compared to MWDs, which were calculated by a conventional calibration of the SEC-retention time axis with peak retention data obtained from the mass spectrometer. Comparison showed that for the employed chromatographic system, distributions below 7 kDa were only weakly influenced by chromatographic band broadening. However, the maximum entropy algorithm could successfully correct the MWD of a 10 kDa standard for band broadening effects. Molecular weight averages were between 5 and 14% lower than the manufacturer stated data obtained by classical means of calibration. The presented method demonstrates a consistent approach for analyzing data obtained by coupling mass spectrometric detectors and concentration sensitive detectors to polymer liquid chromatography.

Required coefficient of friction in the anteroposterior and mediolateral direction during turning at different walking speeds

PubMed Central

Yamaguchi, Takeshi; Suzuki, Akito; Hokkirigawa, Kazuo

2017-01-01

This study investigated the required coefficient of friction (RCOF) and the tangent of center of mass (COM)–center of pressure (COP) angle in the mediolateral (ML) and anteroposterior (AP) directions during turning at different walking speeds. Sixteen healthy young adults (8 males and 8 females) participated in this study. The participants were instructed to conduct trials of straight walking and 90° step and spin turns to the right at each of three self-selected speeds (slow, normal, and fast). The ML and AP directions during turning gait were defined using the orientation of the pelvis to construct a body-fixed reference frame. The RCOF values and COM–COP angle tangent in the ML direction during turning at weight acceptance phase were higher than those during straight walking, and those values increased with increasing walking speed. The ML component of the RCOF and COM–COP tangent values during weight acceptance for step turns were higher than those for spin turns. The mean centripetal force during turning tended to increase with an increase in walking speed and had a strong positive correlation with the RCOF values in the ML direction (R = 0.97 during the weight acceptance phase; R = 0.95 during the push-off phase). Therefore, turning, particularly step turn, is likely to cause lateral slip at weight acceptance because of the increased centripetal force compared with straight walking. Future work should test at-risk population and compare with the present results. PMID:28640853

Required coefficient of friction in the anteroposterior and mediolateral direction during turning at different walking speeds.

PubMed

Yamaguchi, Takeshi; Suzuki, Akito; Hokkirigawa, Kazuo

2017-01-01

This study investigated the required coefficient of friction (RCOF) and the tangent of center of mass (COM)-center of pressure (COP) angle in the mediolateral (ML) and anteroposterior (AP) directions during turning at different walking speeds. Sixteen healthy young adults (8 males and 8 females) participated in this study. The participants were instructed to conduct trials of straight walking and 90° step and spin turns to the right at each of three self-selected speeds (slow, normal, and fast). The ML and AP directions during turning gait were defined using the orientation of the pelvis to construct a body-fixed reference frame. The RCOF values and COM-COP angle tangent in the ML direction during turning at weight acceptance phase were higher than those during straight walking, and those values increased with increasing walking speed. The ML component of the RCOF and COM-COP tangent values during weight acceptance for step turns were higher than those for spin turns. The mean centripetal force during turning tended to increase with an increase in walking speed and had a strong positive correlation with the RCOF values in the ML direction (R = 0.97 during the weight acceptance phase; R = 0.95 during the push-off phase). Therefore, turning, particularly step turn, is likely to cause lateral slip at weight acceptance because of the increased centripetal force compared with straight walking. Future work should test at-risk population and compare with the present results.

Using the Habit App for Weight Loss Problem Solving: Development and Feasibility Study.

PubMed

Pagoto, Sherry; Tulu, Bengisu; Agu, Emmanuel; Waring, Molly E; Oleski, Jessica L; Jake-Schoffman, Danielle E

2018-06-20

Reviews of weight loss mobile apps have revealed they include very few evidence-based features, relying mostly on self-monitoring. Unfortunately, adherence to self-monitoring is often low, especially among patients with motivational challenges. One behavioral strategy that is leveraged in virtually every visit of behavioral weight loss interventions and is specifically used to deal with adherence and motivational issues is problem solving. Problem solving has been successfully implemented in depression mobile apps, but not yet in weight loss apps. This study describes the development and feasibility testing of the Habit app, which was designed to automate problem-solving therapy for weight loss. Two iterative single-arm pilot studies were conducted to evaluate the feasibility and acceptability of the Habit app. In each pilot study, adults who were overweight or obese were enrolled in an 8-week intervention that included the Habit app plus support via a private Facebook group. Feasibility outcomes included retention, app usage, usability, and acceptability. Changes in problem-solving skills and weight over 8 weeks are described, as well as app usage and weight change at 16 weeks. Results from both pilots show acceptable use of the Habit app over 8 weeks with on average two to three uses per week, the recommended rate of use. Acceptability ratings were mixed such that 54% (13/24) and 73% (11/15) of participants found the diet solutions helpful and 71% (17/24) and 80% (12/15) found setting reminders for habits helpful in pilots 1 and 2, respectively. In both pilots, participants lost significant weight (P=.005 and P=.03, respectively). In neither pilot was an effect on problem-solving skills observed (P=.62 and P=.27, respectively). Problem-solving therapy for weight loss is feasible to implement in a mobile app environment; however, automated delivery may not impact problem-solving skills as has been observed previously via human delivery. ClinicalTrials.gov NCT02192905; https://clinicaltrials.gov/ct2/show/NCT02192905 (Archived by WebCite at http://www.webcitation.org/6zPQmvOF2). ©Sherry Pagoto, Bengisu Tulu, Emmanuel Agu, Molly E Waring, Jessica L Oleski, Danielle E Jake-Schoffman. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 20.06.2018.

[Characteristics of lip-mouth region in smiling position from 80 adults with acceptable faces and individual normal occlusions].

PubMed

Zhang, J; Chen, Y; Zhou, X

1997-07-01

The Characteristics of Lip-mouth region including the soft and hard tissues in smiling position with frontal fixed position photographic computered analysis was studied. The examples were 80 adults (40 males and 40 females) with acceptable faces and individual normal occlusions. The age was between 17-25 years of age. The method adopting maximum smiling position to study the lip-mouth region is scientific, and the maximum smile line could be divided into three categories: low smile line-a-counted for 16.25% of the total samples; average smile line--68.75%; high smile line--15%.

A New Look at the Science of Weight Control: How Acceptance and Commitment Strategies Can Address the Challenge of Self-Regulation

PubMed Central

Forman, Evan M.; Butryn, Meghan L.

2014-01-01

Despite decades of work, behavioral interventions for obesity are not yet able to facilitate long-term weight loss maintenance for most participants. The current manuscript proposes an acceptance-based, self-regulation framework for understanding the challenge of maintaining changes in weight-related behavior and describes how this framework can be integrated into the behavioral treatment of obesity. According to this framework, intrinsic drives to consume palatable, high-calorie food interact with a modern environment in which high calorie foods are easily accessible. This combination produces a chronic desire to eat unhealthy foods that exists in opposition to individuals’ weight control goals. Similarly, energy expenditure requirements in the modern environment are limited, and people’s innate preferences to conserve energy typically prevent the concerted effort that would be necessary to engage in lifestyle activity and structured activity. Both external (e.g., sight of food) and internal (e.g., an aversive emotion) cues motivate overeating and sedentary behavior. However, individuals vary in their responsivity to these cues. While standard behavior skills may enable those lower in responsivity to successfully achieve weight control, we suggest that those higher in responsivity need specialized self-regulatory skills to maintain healthy eating and exercise behaviors. These skills include an ability to tolerate uncomfortable internal reactions to triggers and a reduction of pleasure, behavioral commitment to clearly-defined values, and metacognitive awareness of decision-making processes. So-called “acceptance-based” interventions based on these skills have so far proven efficacious for weight control, especially for those who are the most susceptible to eating in response to internal and external cues (as predicted by the model). Despite the current empirical support for the postulated model and for the interventions which stem from it, much remains to be learned including whether acceptance-based interventions will prove efficacious in the longer-term. PMID:25445199

Growth of the eye lens: II. Allometric studies.

PubMed

Augusteyn, Robert C

2014-01-01

The purpose of this study was to examine the ontogeny and phylogeny of lens growth in a variety of species using allometry. Data on the accumulation of wet and/or dry lens weight as a function of bodyweight were obtained for 40 species and subjected to allometric analysis to examine ontogenic growth and compaction. Allometric analysis was also used to compare the maximum adult lens weights for 147 species with the maximum adult bodyweight and to compare lens volumes calculated from wet and dry weights with eye volumes calculated from axial length. Linear allometric relationships were obtained for the comparison of ontogenic lens and bodyweight accumulation. The body mass exponent (BME) decreased with increasing animal size from around 1.0 in small rodents to 0.4 in large ungulates for both wet and dry weights. Compaction constants for the ontogenic growth ranged from 1.00 in birds and reptiles up to 1.30 in mammals. Allometric comparison of maximum lens wet and dry weights with maximum bodyweights also yielded linear plots with a BME of 0.504 for all warm blooded species except primates which had a BME of 0.25. When lens volumes were compared with eye volumes, all species yielded a scaling constant of 0.75 but the proportionality constants for primates and birds were lower. Ontogenic lens growth is fastest, relative to body growth, in small animals and slowest in large animals. Fiber cell compaction takes place throughout life in most species, but not in birds and reptiles. Maximum adult lens size scales with eye size with the same exponent in all species, but birds and primates have smaller lenses relative to eye size than other species. Optical properties of the lens are generated through the combination of variations in the rate of growth, rate of compaction, shape and size.

Sibling Family Practices: Guidelines for Healthy Boundaries

ERIC Educational Resources Information Center

Johnson, Toni Cavanagh; Huang, Bevan Emma; Simpson, Pippa M.

2009-01-01

A questionnaire was given to 500 mental health and child welfare professionals asking for maximum acceptable ages for siblings to engage jointly in certain family practices related to hygiene, affection, and privacy. A large proportion of respondents felt it was never acceptable for siblings to take showers together (40%), kiss on the mouth (37%),…

Why Small Is Beautiful: Wing Colour Is Free from Thermoregulatory Constraint in the Small Lycaenid Butterfly, Polyommatus icarus

PubMed Central

De Keyser, Rien; Breuker, Casper J.; Hails, Rosemary S.; Dennis, Roger L. H.; Shreeve, Tim G.

2015-01-01

We examined the roles of wing melanisation, weight, and basking posture in thermoregulation in Polyommatus Icarus, a phenotypically variable and protandrous member of the diverse Polyommatinae (Lycaenidae). Under controlled experimental conditions, approximating to marginal environmental conditions for activity in the field (= infrequent flight, long duration basking periods), warming rates are maximised with fully open wings and maximum body temperatures are dependent on weight. Variation in wing melanisation within and between sexes has no effect on warming rates; males and females which differ in melanisation had similar warming rates. Posture also affected cooling rates, consistent with cooling being dependent on convective heat loss. We hypothesise that for this small sized butterfly, melanisation has little or no effect on thermoregulation. This may be a factor contributing to the diversity of wing colours in the Polyommatinae. Because of the importance of size for thermoregulation in this small butterfly, requirements for attaining a suitable size to confer thermal stability in adults may also be a factor influencing larval feeding rates, development time and patterns of voltinism. Our findings indicate that commonly accepted views of the importance of melanisation, posture and size to thermoregulation, developed using medium and large sized butterflies, are not necessarily applicable to small sized butterflies. PMID:25923738

Why Small Is Beautiful: Wing Colour Is Free from Thermoregulatory Constraint in the Small Lycaenid Butterfly, Polyommatus icarus.

PubMed

De Keyser, Rien; Breuker, Casper J; Hails, Rosemary S; Dennis, Roger L H; Shreeve, Tim G

2015-01-01

We examined the roles of wing melanisation, weight, and basking posture in thermoregulation in Polyommatus Icarus, a phenotypically variable and protandrous member of the diverse Polyommatinae (Lycaenidae). Under controlled experimental conditions, approximating to marginal environmental conditions for activity in the field (= infrequent flight, long duration basking periods), warming rates are maximised with fully open wings and maximum body temperatures are dependent on weight. Variation in wing melanisation within and between sexes has no effect on warming rates; males and females which differ in melanisation had similar warming rates. Posture also affected cooling rates, consistent with cooling being dependent on convective heat loss. We hypothesise that for this small sized butterfly, melanisation has little or no effect on thermoregulation. This may be a factor contributing to the diversity of wing colours in the Polyommatinae. Because of the importance of size for thermoregulation in this small butterfly, requirements for attaining a suitable size to confer thermal stability in adults may also be a factor influencing larval feeding rates, development time and patterns of voltinism. Our findings indicate that commonly accepted views of the importance of melanisation, posture and size to thermoregulation, developed using medium and large sized butterflies, are not necessarily applicable to small sized butterflies.

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2012 CFR

2012-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2011 CFR

2011-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2013 CFR

2013-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

Passenger comfort technology for system decision making

NASA Technical Reports Server (NTRS)

Conner, D. W.

1980-01-01

Decisions requiring passenger comfort technology were shown to depend on: the relationship between comfort and other factors (e.g., cost, urgency, alternate modes) in traveler acceptance of the systems, serving a selected market require technology to quantify effects of comfort versus offsetting factors in system acceptance. Public predict the maximum percentage of travelers who willingly accept the overall comfort of any trip ride. One or the other of these technology requirements apply to decisions on system design, operation and maintenance.

Fat is fashionable and fit: A comparative content analysis of Fatspiration and Health at Every Size® Instagram images.

PubMed

Webb, Jennifer B; Vinoski, Erin R; Bonar, Adrienne S; Davies, Alexandria E; Etzel, Lena

2017-09-01

In step with the proliferation of Thinspiration and Fitspiration content disseminated in popular web-based media, the fat acceptance movement has garnered heightened visibility within mainstream culture via the burgeoning Fatosphere weblog community. The present study extended previous Fatosphere research by comparing the shared and distinct strategies used to represent and motivate a fat-accepting lifestyle among 400 images sourced from Fatspiration- and Health at Every Size ® -themed hashtags on Instagram. Images were systematically analyzed for the socio-demographic and body size attributes of the individuals portrayed alongside content reflecting dimensions of general fat acceptance, physical appearance pride, physical activity and health, fat shaming, and eating and weight loss-related themes. #fatspiration/#fatspo-tagged images more frequently promoted fat acceptance through fashion and beauty-related activism; #healthateverysize/#haes posts more often featured physically-active portrayals, holistic well-being, and weight stigma. Findings provide insight into the common and unique motivational factors and contradictory messages encountered in these fat-accepting social media communities. Copyright © 2017 Elsevier Ltd. All rights reserved.

Performance Analysis of IEEE 802.11g TCM Waveforms Transmitted over a Channel with Pulse-Noise Interference

DTIC Science & Technology

2007-06-01

17 Table 2. Best (maximum free distance) rate r=2/3 punctured convolutional code ...Hamming distance between all pairs of non-zero paths. Table 2 lists the best rate r=2/3, punctured convolutional code information weight structure dB...Table 2. Best (maximum free distance) rate r=2/3 punctured convolutional code information weight structure. (From: [12]). K freed freeB

On the Performance of Maximum Likelihood versus Means and Variance Adjusted Weighted Least Squares Estimation in CFA

ERIC Educational Resources Information Center

Beauducel, Andre; Herzberg, Philipp Yorck

2006-01-01

This simulation study compared maximum likelihood (ML) estimation with weighted least squares means and variance adjusted (WLSMV) estimation. The study was based on confirmatory factor analyses with 1, 2, 4, and 8 factors, based on 250, 500, 750, and 1,000 cases, and on 5, 10, 20, and 40 variables with 2, 3, 4, 5, and 6 categories. There was no…

Polymer-surfactant complex formation and its effect on turbulent wall shear stress.

PubMed

Suksamranchit, Siriluck; Sirivat, Anuvat; Jamieson, Alexander M

2006-02-01

Turbulent drag reduction in Couette flow was investigated in terms of a decrease in wall shear stress for aqueous solutions of a nonionic polymer, poly(ethylene oxide) (PEO), a cationic surfactant, hexadecyltrimethylammonium chloride (HTAC), and their mixtures. Consistent with literature data, drag reduction was observed for PEO solutions above a critical molecular weight, 0.91 x 10(5) < Mc < 3.04 x 10(5) g/mol. Maximum drag reduction occurred at an optimum concentration, c(PEO)*, which scales inversely with molecular weight, and the % maximum drag reduction increases with molecular weight. For aqueous HTAC solutions, wall shear stress decreased with increasing HTAC concentration and leveled off at an optimum concentration, c(HTAC)*, comparable to the critical micelle concentration. For HTAC/PEO mixtures, the critical PEO molecular weight for drag reduction decreases, interpreted as due to an increase in hydrodynamic volume because of binding of HTAC micelles to PEO. Consistent with this interpretation, at fixed PEO concentration, maximum drag reduction was observed at an optimum HTAC concentration, c(HTAC/PEO)*, comparable to the maximum binding concentration, MBC. Also, with HTAC concentration fixed at the MBC, the optimum PEO concentration for drag reduction, c(PEO/HTAC)*, decreases relative to that, c(PEO)*, in the absence of HTAC.

Weight History, All-Cause and Cause-Specific Mortality in Three Prospective Cohort Studies

PubMed Central

Yu, Edward; Stokes, Andrew C.; Ley, Sylvia H.; Manson, JoAnn E.; Willett, Walter; Satija, Ambika; Hu, Frank B.

2017-01-01

BACKGROUND The relationship between body mass index (BMI) and mortality remains controversial. OBJECTIVE To investigate the relationship between maximum BMI over 16 years and subsequent mortality. DESIGN Three prospective cohort studies. SETTING Nurses’ Health Study I and II, Health Professionals Follow-up Study. PARTICIPANTS 225,072 men and women accruing 32,571 deaths over a mean of 12.3 years of follow-up. MEASUREMENTS Maximum BMI over 16 years of weight history and all-cause and cause-specific mortality. RESULTS Maximum BMIs in the overweight (25.0 to 29.9 kg/m2) (multivariate hazard ratio (HR), 1.06; 95% confidence interval (CI), 1.03 – 1.08), obese I (30.0 to 34.9 kg/m2), (HR, 1.24; 95% CI, 1.20 – 1.29), and obese II (≥ 35.0 kg/m2) (HR, 1.73; 95% CI, 1.66 – 1.80) categories were associated with increases in risk of all-cause mortality. The pattern of excess risk with a maximum BMI above normal weight was maintained across strata defined by smoking status, sex, and age, but the excess was greatest among those <70 years old and never smokers. In contrast, a significant inverse association between overweight and mortality (HR, 0.96; 95% CI, 0.94 – 0.99) was observed when BMI was defined using a single baseline measurement. Maximum overweight was also associated with increased cause-specific mortality, including deaths from cardiovascular diseases and coronary heart disease. LIMITATIONS Residual confounding and misclassification. CONCLUSIONS The paradoxical association between overweight and mortality is reversed in analyses incorporating weight history. Maximum BMI may be a useful metric to minimize reverse causation bias associated with a single baseline BMI assessment. PMID:28384755

Determining the Criteria and Their Weights for Medical Schools' Ranking: A National Consensus.

PubMed

Mojtahedzadeh, Rita; Mohammadi, Aeen; Kohan, Noushin; Gharib, Mitra; Zolfaghari, Mitra

2016-06-01

Delphi as a consensus development technique enables anonymous, systematic refinement of expert opinion with the aim of arriving at a combined or consensual position. In this study, we determined the criteria and their weights for Iranian Medical Schools' ranking through a Delphi process. An expert committee devised 13 proposed criteria with 32 indicators with their weights, which were arranged hierarchically in the form of a tree diagram. We used the Delphi technique to reach a consensus on these criteria and weights among the deans of 38 public Iranian medical schools. For this purpose, we devised and sent a questionnaire to schools and asked them to suggest or correct the criteria and their weights. We repeated this process in two rounds till all the schools reached an acceptable consensus on them. All schools reached a consensus on the set of 13 criteria and 30 indicators and their weights in three main contexts of education, research and facilities, and equipment which were used for Medical Schools' ranking. Using Delphi technique for devising the criteria and their weights in evaluation processes such as ranking makes their results more acceptable among universities.

Tailored composite wings with elastically produced chordwise camber

NASA Technical Reports Server (NTRS)

Rehfield, Lawrence W.; Chang, Stephen; Zischka, Peter J.; Pickings, Richard D.; Holl, Michael W.

1991-01-01

Four structural concepts were created which produce chordwise camber deformation that results in enhanced lift. A wing box can be tailored to utilize each of these with composites. In attempting to optimize the aerodynamic benefits, researchers found that there are two optimum designs that are of interest. There is a weight optimum which corresponds to the maximum lift per unit structural weight. There is also a lift optimum that corresponds to maximum absolute lift. Experience indicates that a large weight penalty accompanies the transition from weight to lift optimum designs. New structural models, the basic deformation mechanisms that are utilized, and typical analytical results are presented. It appears that lift enhancements of sufficient magnitude can be produced to render this type of wing tailoring of practical interest.

Resisting body dissatisfaction: fat women who endorse fat acceptance.

PubMed

McKinley, Nita Mary

2004-05-01

Fat women who endorsed fat acceptance (N=128) were recruited from Radiance Magazine. Relationships between objectified body consciousness (OBC), body esteem, and psychological well-being for the mostly European American sample were similar to those found in other samples. OBC was independently related to body esteem when weight dissatisfaction was controlled. Those who endorsed the need for social change in attitudes towards fat people had higher body esteem and self-acceptance, and lower body shame, than those who endorsed personal acceptance of body size only.

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (iv) Weight of full permanent fuel tanks. (3) “Machinery weight” is the combined weight of installed engines or motors, control equipment, drive units, and batteries. [CGD 72-61R, 37 FR 15782, Aug. 4, 1972...

Comparison of physician weight loss goals for obese male and female patients.

PubMed

Dutton, Gareth R; Perri, Michael G; Stine, Curtis C; Goble, Mary; Van Vessem, Nancy

2010-04-01

The aim of this study was to compare physicians' weight loss goals for obese male and female patients. This study was conducted in 2008-2009 in Florida, USA. Physicians (N=108; 79.6% primary care specialty) reviewed two hypothetical clinical scenarios that were identical with respect to health status and obesity (BMI=33 kg/m(2)) but differed in the gender of the patient. Physicians then completed a survey about the need for weight loss, intentions to provide weight loss counseling, and weight loss goals (i.e., ideal, successful, and acceptable goal weights) for each hypothetical patient. Physicians strongly agreed that both patients should lose weight and physician counseling and/or treatment referrals would be appropriate; however, physician weight loss goals for male and female patients differed. BMI values calculated from the suggested ideal, successful, and acceptable weight goals were significantly lower for female patients than male patients, 22.0 vs. 25. 2 kg/m(2); 25.4 vs. 27. 8 kg/m(2); and 27.0 vs. 29. 2 kg/m(2), respectively, P values <.001. Physicians endorsed significantly more stringent weight loss goals for obese female patients than obese male patients. Regardless of patient gender, physician goals exceeded the 5-10% losses currently recommended. Additional research is needed to better understand this gender discrepancy in physician expectations for obese patients. Copyright 2010 Elsevier Inc. All rights reserved.

12 CFR 741.204 - Maximum public unit and nonmember accounts, and low-income designation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... low-income designation. 741.204 Section 741.204 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION... Unions § 741.204 Maximum public unit and nonmember accounts, and low-income designation. Any credit union...) Obtain a low-income designation in order to accept nonmember accounts, other than from public units or...

Associations of Region-Specific Foot Pain and Foot Biomechanics: The Framingham Foot Study

PubMed Central

Hagedorn, Thomas J.; Dufour, Alyssa B.; Hannan, Marian T.

2015-01-01

Background. Specific regions of the foot are responsible for the gait tasks of weight acceptance, single-limb support, and forward propulsion. With region foot pain, gait abnormalities may arise and affect the plantar pressure and force pattern utilized. Therefore, this study’s purpose was to evaluate plantar pressure and force pattern differences between adults with and without region-specific foot pain. Methods. Plantar pressure and force data were collected on Framingham Foot Study members while walking barefoot at a self-selected pace. Foot pain was evaluated by self-report and grouped by foot region (toe, forefoot, midfoot, or rearfoot) or regions (two or three or more regions) of pain. Unadjusted and adjusted linear regression with generalized estimating equations was used to determine associations between feet with and without foot pain. Results. Individuals with distal foot (forefoot or toes) pain had similar maximum vertical forces under the pain region, while those with proximal foot (rearfoot or midfoot) pain had different maximum vertical forces compared to those without regional foot pain (referent). During walking, there were significant differences in plantar loading and propulsion ranging from 2% to 4% between those with and without regional foot pain. Significant differences in normalized maximum vertical force and plantar pressure ranged from 5.3% to 12.4% and 3.4% to 24.1%, respectively, between those with and without regional foot pain. Conclusions. Associations of regional foot pain with plantar pressure and force were different by regions of pain. Region-specific foot pain was not uniformly associated with an increase or decrease in loading and pressure patterns regions of pain. PMID:25995291

Alternative Fuels Data Center

Science.gov Websites

vehicles equipped with idle reduction technology may exceed the state's gross and axle weight limits by up vehicle primarily powered by natural gas may exceed the state's gross vehicle weight limits by a weight maximum gross weight may not exceed 82,000 lbs. (Reference New Mexico Statutes 66-7-4

Alternative Fuels Data Center

Science.gov Websites

vehicles equipped with idle reduction technology may exceed the state's gross and axle weight limits by up vehicle primarily powered by natural gas may exceed the state's gross vehicle weight limits by a weight and the weight of a comparable vehicle with a diesel tank and fueling system. The NGV maximum gross

Patterns of postnatal weight changes in infants with very low and extremely low birth weights.

PubMed

Smith, S L; Kirchhoff, K T; Chan, G M; Squire, S J

1994-01-01

To describe (1) short-term postnatal weight loss and gain patterns in infants with very low and extremely low birth weights and (2) the variables that may affect these weight change patterns. Descriptive, retrospective review. University hospital in the intermountain western United States. Sixty-two charts of infants admitted to a university neonatal intensive care unit from July 1990 through November 1992 were reviewed. Infants who weighed 1000 grams or less were categorized as extremely low birth weight (ELBW) and infants weighing 1001 to 1500 grams were categorized as very low birth weight (VLBW). Each group was comprised of 31 infants. Fifty percent of the sample were male, and 50% were female. Eighty-five percent of the sample were Anglo-American, and 15% were non-Anglo-American. Data were collected on a three-part data collection tool and included demographic and treatment variables. A significant difference was found in the maximum percent weight lost between the two groups, with the ELBW group losing a mean of 14.77% of birth weight and the VLBW group losing a mean of 11.35% of birth weight (t = 2.45, p < 0.05). The day the infants reached their nadir weight was significantly different between the two groups. The ELBW group reached their nadir on day of life 7, and the VLBW group reached their nadir on day of life 6 (t = 2.00, p < 0.05). No significant difference was noted in the time to return to birth weight between the two groups, with a mean of 15 days to return to birth weight. Factors associated with postnatal weight changes were intraventricular hemorrhage, use of diuretics and steroids, day of life when nadir weight occurred, and maximum percent of weight lost. Many of the independent variables were significantly interrelated to each other (r = -0.90 to r = 0.91, p < 0.01 to p < 0.001). However, only the variables that correlated with time to return to birth weight were entered into the regression analysis. These variables included number of days diuretics were given before return to birth weight, maximum percent of weight lost, and day of life the infants reached their nadir weight. Number of days diuretics were given before return to birth weight correlated significantly with time to return to birth weight (r = 0.77, F = 26.66, p < 0.0001) although maximum percent of weight lost and day of life the infants reached their nadir weight had a minimal effect. Further research into the effects of diuretic therapy on weight changes in this population of infants may lead to interventions to minimize the negative effects of diuretics on return to birth weight. In addition, the older growth charts may not be applicable to this population of infants. Generation of new growth charts that provide growth curves based on these data could be useful in developing nutritional therapies that would promote growth and possibly decrease the length of hospital stay for these infants.

Feasibility and effectiveness of an automated bilingual text message intervention for weight loss: pilot study.

PubMed

Kolodziejczyk, Julia K; Norman, Gregory J; Barrera-Ng, Angelica; Dillon, Lindsay; Marshall, Simon; Arredondo, Elva; Rock, Cheryl L; Raab, Fred; Griswold, William G; Sullivan, Mark; Patrick, Kevin

2013-11-06

Little is known about the feasibility and acceptability of tailored text message based weight loss programs for English and Spanish-language speakers. This pilot study evaluated the feasibility, acceptability, and estimated impact of a tailored text message based weight loss program for English and Spanish-language speakers. The purpose of this pilot study was to inform the development of a full-scale randomized trial. There were 20 overweight or obese participants (mean age 40.10, SD 8.05; 8/20, 40% male; 9/20, 45% Spanish-speakers) that were recruited in San Diego, California, from March to May 2011 and evaluated in a one-group pre/post clinical trial. For 8 weeks, participants received and responded to 3-5 text messages daily sent from a fully automated text messaging system. They also received printed weight loss materials and brief 10-15 minute weekly counseling calls. To estimate the impact of the program, the primary outcome was weight (kg) measured during face-to-face measurement visits by trained research staff. Pre and post differences in weight were analyzed with a one-way repeated measures analysis of variance. Differences by language preference at both time points were analyzed with t tests. Body mass index and weight management behaviors also were examined. Feasibility and acceptability were determined by recruitment success, adherence (ie, percentage of replies to interactive text messages and attrition), and participant satisfaction. Participants who completed the final assessment (N=18) decreased body weight by 1.85 kg (F1,17=10.80, P=.004, CI∆ 0.66-3.03, η(2)=0.39). At both time points, there were no differences in weight by language preference. Participants responded to 88.04% (986/1120) of interactive text messages, attrition rate was 10% (2/20), and 94% (19/20) of participants reported satisfaction with the program. This fully automated text message based weight program was feasible with English and Spanish-speakers and may have promoted modest weight loss over an 8-week period. Clinicaltrials.gov NCT01171586; http://clinicaltrials.gov/ct2/show/NCT01171586 (Archived by WebCite at http://www.webcitation.org/6Ksr6dl7n).

The Psychological Consequences of Weight Change Trajectories: Evidence from Quantitative and Qualitative Data†

PubMed Central

Carr, Deborah; Jaffe, Karen

2012-01-01

We use quantitative and qualitative data to explore the psychological impact of weight change among American adults. Using data from the Midlife Development in the United States (MIDUS) study, a survey of more than 3,000 adults ages 25 to 74 in 1995, we contrast underweight, normal weight, overweight, obese I, and obese II/III persons along five psychosocial outcomes: positive mood, negative mood, perceived interpersonal discrimination, self-acceptance, and self-satisfaction. We further assess whether these relationships are contingent upon one's body mass index (BMI) at age 21. We find a strong inverse association between adult BMI and each of the five outcomes, reflecting the stigma associated with high body weight. However, overweight adults who were also overweight at age 21 are more likely than persons who were previously slender to say they were “very satisfied” with themselves. Results from 40 in-depth semi-structured interviews reveal similarly that persons who were persistently overweight or obese accept their weight as part of their identity, whereas those who experienced substantial weight increases (or decreases) struggle between two identities: the weight they actually are, and the weight that they believe exemplifies who they are. We discuss implications for stigma theory, and the ways that stigma exits and entries affect psychological well-being. PMID:22580044

Maternal and child awareness and expectations of child overweight.

PubMed

Brødsgaard, Anne; Wagner, Lis; Peitersen, Birgit; Poulsen, Ingrid; Sørensen, Thorkild I A

2011-01-01

We investigated mothers' and children's assessments of body weight and their expectations about perceived body size in relation to overweight of the children. We performed a case-control study of 111 cases of overweight children and 149 controls of non-overweight children (mean age 8.1 years) and their mothers. All were examined and interviewed about their assessment of body weight and their perception of a normal, attractive and acceptable body size. Case children were less able than control children to correctly assess their own body weight (p < 0.001), as were mothers of overweight children (MOC) to assess their children's body weight (p < 0.001). The majority of mothers from both groups wished their children to have a normal body size, but 18% of MOC wished their children to have an overweight body size (p < 0.013). The majority of case children, control children and mothers found a normal body size for boys and girls to be the most attractive and socially acceptable, but more MOC found overweight among boys to be the most attractive (p = 0.006). Overweight children and their mothers show increased uncertainty in the assessment of overweight and obesity, but the perception of a normal, attractive and socially acceptable body size is not distorted. Copyright © 2011 S. Karger AG, Basel.

Adherence and tolerance as key in brake on weight loss in cancer patients with nutritional risk after intervention with a high calorie nutritional and specific hyperproteic supplement

PubMed

García Almeida, Jose M; Lupiáñez Pérez, Yolanda; Blanco Naveira, Mercedes; Ruiz Nava, Josefina; Medina, José Antonio; Cornejo Pareja, Isabel; Gómez Pérez, Ana; Molina Vega, María; López-Medina, José A; Tinahones Madueño, Francisco

2017-06-05

Background: In patients with nutritional risk, the European Society for Clinical Nutrition and Metabolism (ESPEN) recommends nutritional supplements during cancer treatment to prevent weight loss. Objectives: Our goal is to determine the acceptability, compliance and tolerance of a hyperproteic, high-calorie, omega-3 enriched supplement in cancer patients. Methods: Unicentric, prospective observational study in cancer patients with hyperproteic, high-calorie, rich in omega 3 and low volume nutritional supplement. Thirty patients with malnutrition or risk of malnutrition were included. Supplementation lasted six days. Compliance (packaging used), acceptability (Madrid scale), anthropometric variables and gastrointestinal adverse events (AEs) were evaluated. Results: Seventy per cent were men, with an average age of 60 years (range 32-79), with lung (43.3%), ENT (26.7%) and breast neoplasms (13.3%), stage III-IV (56.7%), and treated with radiotherapy (93.3%), chemotherapy (60%) and surgery (16.7%). The product was accepted by all patients. A compliance rate of 100% was observed. Gastrointestinal AE (grade II) related to the supplement was observed in two patients (6.7%). Both subjects had previous gastrointestinal diseases. The median weight, body mass index (BMI) and protein intake increased during supplementation (0.2 kg, 0.1 kg/m2 and 6.2 g). No differences were observed regarding calorie, fat and carbohydrates intake. Conclusion: The high acceptance and compliance with the specific nutritional supplement was associated with an improved nutritional status for cancer patients, and reversed the weight loss without severe gastrointestinal problems, or producing intake displacement.

Maximum of the modulus of kernels in Gauss-Turan quadratures

NASA Astrophysics Data System (ADS)

Milovanovic, Gradimir V.; Spalevic, Miodrag M.; Pranic, Miroslav S.

2008-06-01

We study the kernels K_{n,s}(z) in the remainder terms R_{n,s}(f) of the Gauss-Turan quadrature formulae for analytic functions on elliptical contours with foci at pm 1 , when the weight omega is a generalized Chebyshev weight function. For the generalized Chebyshev weight of the first (third) kind, it is shown that the modulus of the kernel \\vert K_{n,s}(z)\\vert attains its maximum on the real axis (positive real semi-axis) for each ngeq n_0, n_0Dn_0(rho,s) . It was stated as a conjecture in [Mathematics of Computation 72 (2003), 1855-1872]. For the generalized Chebyshev weight of the second kind, in the case when the number of the nodes n in the corresponding Gauss-Turan quadrature formula is even, it is shown that the modulus of the kernel attains its maximum on the imaginary axis for each ngeq n_0, n_0Dn_0(rho,s) . Numerical examples are included. Retrieve articles in all Journals with MSC (1991): [41]41A55, [42]65D30, [43]65D32

Mother-teen communication about weight management.

PubMed

Dailey, René M; Thompson, Charee M; Romo, Lynsey Kluever

2014-01-01

Although research shows family members can influence each other's diet and exercise behaviors, the specific strategies that most effectively motivate individuals to enact healthy behaviors have not been revealed. Toward this goal, this study employed confirmation theory to assess how the quality of weight management (WM) communication between 107 mother-teen dyads was related to their diet and exercise behaviors as well as their subjective perceptions of the productivity of WM conversations. Confirmation theory proposes two components of confirmation: acceptance and challenge. Analyses revealed that accepting and challenging communication were both positively related to the perceived productivity of WM conversations. However, more complex associations emerged for diet and exercise. Acceptance was more helpful in motivating better eating habits for mothers with low health motivation and teens with high health motivation. For exercise, challenge was helpful in motivating teens with higher sensitivity about communicating about weight issues; however, counter to predictions, challenge was negatively related to exercise for teens with low health motivation and low sensitivity. These interactions, however, explained less variance than analyses for perceived effectiveness and satisfaction.

49 CFR 173.57 - Acceptance criteria for new explosives.

Code of Federal Regulations, 2011 CFR

2011-10-01

... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid...

49 CFR 173.57 - Acceptance criteria for new explosives.

Code of Federal Regulations, 2012 CFR

2012-10-01

... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid...

49 CFR 173.57 - Acceptance criteria for new explosives.

Code of Federal Regulations, 2014 CFR

2014-10-01

... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid...

49 CFR 173.57 - Acceptance criteria for new explosives.

Code of Federal Regulations, 2013 CFR

2013-10-01

... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid...

Laboratory study of effects of sonic boom shaping on subjective loudness and acceptability

NASA Technical Reports Server (NTRS)

Leatherwood, Jack D.; Sullivan, Brenda M.

1992-01-01

A laboratory study was conducted to determine the effects of sonic boom signature shaping on subjective loudness and acceptability. The study utilized the sonic boom simulator at the Langley Research Center. A wide range of symmetrical, front-shock-minimized signature shapes were investigated together with a limited number of asymmetrical signatures. Subjective loudness judgments were obtained from 60 test subjects by using an 11-point numerical category scale. Acceptability judgments were obtained using the method of constant stimuli. Results were used to assess the relative predictive ability of several noise metrics, determine the loudness benefits of detailed boom shaping, and derive laboratory sonic boom acceptability criteria. These results indicated that the A-weighted sound exposure level, the Stevens Mark 7 Perceived Level, and the Zwicker Loudness Level metrics all performed well. Significant reductions in loudness were obtained by increasing front-shock rise time and/or decreasing front-shock overpressure of the front-shock minimized signatures. In addition, the asymmetrical signatures were rated to be slightly quieter than the symmetrical front-shock-minimized signatures of equal A-weighted sound exposure level. However, this result was based on a limited number of asymmetric signatures. The comparison of laboratory acceptability results with acceptability data obtained in more realistic situations also indicated good agreement.

Acceptable range of speech level in noisy sound fields for young adults and elderly persons.

PubMed

Sato, Hayato; Morimoto, Masayuki; Ota, Ryo

2011-09-01

The acceptable range of speech level as a function of background noise level was investigated on the basis of word intelligibility scores and listening difficulty ratings. In the present study, the acceptable range is defined as the range that maximizes word intelligibility scores and simultaneously does not cause a significant increase in listening difficulty ratings from the minimum ratings. Listening tests with young adult and elderly listeners demonstrated the following. (1) The acceptable range of speech level for elderly listeners overlapped that for young listeners. (2) The lower limit of the acceptable speech level for both young and elderly listeners was 65 dB (A-weighted) for noise levels of 40 and 45 dB (A-weighted), a level with a speech-to-noise ratio of +15 dB for noise levels of 50 and 55 dB, and a level with a speech-to-noise ratio of +10 dB for noise levels from 60 to 70 dB. (3) The upper limit of the acceptable speech level for both young and elderly listeners was 80 dB for noise levels from 40 to 55 dB and 85 dB or above for noise levels from 55 to 70 dB. © 2011 Acoustical Society of America

An Open Trial of Acceptance-based Separated Family Treatment (ASFT) for Adolescents with Anorexia Nervosa

PubMed Central

Timko, C. Alix; Zucker, Nancy L.; Herbert, James D.; Rodriguez, Daniel; Merwin, Rhonda M.

2016-01-01

Family based-treatments have the most empirical support in the treatment of adolescent anorexia nervosa; yet, a significant percentage of adolescents and their families do not respond to manualized family based treatment (FBT). The aim of this open trial was to conduct a preliminary evaluation of an innovative family-based approach to the treatment of anorexia: Acceptance-based Separated Family Treatment (ASFT). Treatment was grounded in Acceptance and Commitment Therapy (ACT), delivered in a separated format, and included an ACT-informed skills program. Adolescents (ages 12–18) with anorexia or sub-threshold anorexia and their families received 20 treatment sessions over 24 weeks. Outcome indices included eating disorder symptomatology reported by the parent and adolescent, percentage of expected body weight achieved, and changes in psychological acceptance/avoidance. Half of the adolescents (48.0%) met criteria for full remission at the end of treatment, 29.8% met criteria for partial remission, and 21.3% did not improve. Overall, adolescents had a significant reduction in eating disorder symptoms and reached expected body weight. Treatment resulted in changes in psychological acceptance in the expected direction for both parents and adolescents. This open trial provides preliminary evidence for the feasibility, acceptability, and efficacy of ASFT for adolescents with anorexia. Directions for future research are discussed. PMID:25898341

Bioproduction of mushroom mycelium of Agaricus bisporus by commercial submerged fermentation for the production of meat analogue.

PubMed

Kim, Kyoungju; Choi, Byungsun; Lee, Inhee; Lee, Hyeyoung; Kwon, Soonhyang; Oh, Kyoungyoung; Kim, Augustine Yonghwi

2011-07-01

As worldwide interest in healthy and delicious meat analogues increases, the texture of these products has become an important indicator of quality. Mycoprotein as fungal mycelium could provide a distinctive chewing sensation; however, the unfavorable consumer perception of fungal mycelium demands the production of meat analogues with true mushroom mycelium. The industrial and economical bioprocess was developed using an inexpensive medium (30 g L(-1) sugar cane extract (SCE), 10 g L(-1) NaNO(3) and 5 g L(-1) yeast extract) and A. bisporus Suksung. The SCE was maintained at around 10 g L(-1) to minimize osmotic shock. The maximum mycelium production of 15.0 g L(-1) (dry weight) was reached within 4 days. Scanning electron microscopic analysis showed fibrous and directional structure rather than a more typical pellet structure. Meat analogues with mushroom mycelium had better textural properties, being higher in hardness, springiness, and chewiness and with preferable umami characteristics compared to meat analogues utilizing soy protein. The overall acceptance of meat analogues prepared with mycelium and soy protein, and a ground beef patty, were 5, 2 and 10, respectively. The development of an industrial bioprocess for A. bisporus mycelium allowed the production of a highly acceptable meat analogue having not only superior textural properties but also umami characteristics when compared to that of soy protein. Copyright © 2011 Society of Chemical Industry.

14 CFR 25.25 - Weight limits.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Weight limits. 25.25 Section 25.25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... requirement is shown, except that for airplanes equipped with standby power rocket engines the maximum weight...

14 CFR 25.25 - Weight limits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Weight limits. 25.25 Section 25.25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... requirement is shown, except that for airplanes equipped with standby power rocket engines the maximum weight...

Improved Neural Networks with Random Weights for Short-Term Load Forecasting

PubMed Central

Lang, Kun; Zhang, Mingyuan; Yuan, Yongbo

2015-01-01

An effective forecasting model for short-term load plays a significant role in promoting the management efficiency of an electric power system. This paper proposes a new forecasting model based on the improved neural networks with random weights (INNRW). The key is to introduce a weighting technique to the inputs of the model and use a novel neural network to forecast the daily maximum load. Eight factors are selected as the inputs. A mutual information weighting algorithm is then used to allocate different weights to the inputs. The neural networks with random weights and kernels (KNNRW) is applied to approximate the nonlinear function between the selected inputs and the daily maximum load due to the fast learning speed and good generalization performance. In the application of the daily load in Dalian, the result of the proposed INNRW is compared with several previously developed forecasting models. The simulation experiment shows that the proposed model performs the best overall in short-term load forecasting. PMID:26629825

Improved Neural Networks with Random Weights for Short-Term Load Forecasting.

PubMed

Lang, Kun; Zhang, Mingyuan; Yuan, Yongbo

2015-01-01

An effective forecasting model for short-term load plays a significant role in promoting the management efficiency of an electric power system. This paper proposes a new forecasting model based on the improved neural networks with random weights (INNRW). The key is to introduce a weighting technique to the inputs of the model and use a novel neural network to forecast the daily maximum load. Eight factors are selected as the inputs. A mutual information weighting algorithm is then used to allocate different weights to the inputs. The neural networks with random weights and kernels (KNNRW) is applied to approximate the nonlinear function between the selected inputs and the daily maximum load due to the fast learning speed and good generalization performance. In the application of the daily load in Dalian, the result of the proposed INNRW is compared with several previously developed forecasting models. The simulation experiment shows that the proposed model performs the best overall in short-term load forecasting.

Influence of 7 days of hindlimb suspension and intermittent weight support on rat muscle mechanical properties

NASA Technical Reports Server (NTRS)

Pierotti, David J.; Roy, Roland R.; Flores, Vinicio; Edgerton, Reggie

1990-01-01

The effect of intermittent periods of weight support on a decrease in mass of the soleus (Sol) and medial gastrocnemius (MG) muscles atrophied by hindlimb suspension (HS) was investigated in rats subjected to continuous HS for seven days or an HS plus intermittent (10 min every 6 hrs of slow walking on a treadmill) weight support (HS-WS). After 7 d HS, the Sol weight relative to body weight was 21 and 9 percent lower in Hs and HS-WS, respectively, than in control rats. Maximum tetanic tension/muscle mass ratio was significantly lower in HS than in controls; the HS-WS rats had values similar to controls, whereas the maximum tetanic tension/muscle weight was significantly elevated in HS-WS compared to controls. Contraction times were 25 percent faster in the Sol and unchanged in the MG of HS rats, indicating that a low-force short-duration exercise regime results in a significant functional recovery in the 'slow' Sol, whereas the 'fast' MG is less affected.

Nanosized soy phytosome-based thermogel as topical anti-obesity formulation: an approach for acceptable level of evidence of an effective novel herbal weight loss product.

PubMed

El-Menshawe, Shahira F; Ali, Adel A; Rabeh, Mohamed A; Khalil, Nermeen M

2018-01-01

Herbal supplements are currently available as a safer alternative to manage obesity, which has become a rising problem over the recent years. Many chemical drugs on the market are designed to prevent or manage obesity but high cost, low efficacy, and multiple side effects limit its use. Nano lipo-vesicles phytosomal thermogel of Soybean, Glycine max ( L .) Merrill, was formulated and evaluated in an attempt to investigate its anti-obesity action on body weight gain, adipose tissue size, and lipid profile data. Three different techniques were used to prepare phytosome formulations including solvent evaporation, cosolvency, and salting out. The optimized phytosome formulation was then selected using Design Expert ® (version 7.0.0) depending on the highest entrapment efficiency, minimum particle size (PS), and maximum drug release within 2 hours as responses for further evaluation. The successful phytosome complex formation was investigated by means of Fourier-transform infrared spec troscopy and determination of PS and zeta potential. Phytosome vesicles' shape was evaluated using transmission electron microscope to ensure its spherical shape. After characterization of the optimized phytosome formulation, it was incorporated into a thermogel formulation. The obtained phytosomal thermogel formulation was evaluated for its clarity, homogeneity, pH, and gel transformation temperature besides rheology behavior and permeation study. An in vivo study was done to investigate the anti-weight-gain effect of soy phytosomal ther mogel. EE was found to be >99% for all formulations, PS ranging from 51.66-650.67 while drug release was found to be (77.61-99.78) in range. FTIR and TEM results confirmed the formation of phytosome complex. In vivo study showed a marked reduction in body weight, adipose tissue weight and lipid profile. Concisely, soy phytosomal thermogel was found to have a local anti-obesity effect on the abdomen of experimental male albino rats with a slight systemic effect on the lipid profile data.

The Multi-Attribute Group Decision-Making Method Based on Interval Grey Trapezoid Fuzzy Linguistic Variables.

PubMed

Yin, Kedong; Wang, Pengyu; Li, Xuemei

2017-12-13

With respect to multi-attribute group decision-making (MAGDM) problems, where attribute values take the form of interval grey trapezoid fuzzy linguistic variables (IGTFLVs) and the weights (including expert and attribute weight) are unknown, improved grey relational MAGDM methods are proposed. First, the concept of IGTFLV, the operational rules, the distance between IGTFLVs, and the projection formula between the two IGTFLV vectors are defined. Second, the expert weights are determined by using the maximum proximity method based on the projection values between the IGTFLV vectors. The attribute weights are determined by the maximum deviation method and the priorities of alternatives are determined by improved grey relational analysis. Finally, an example is given to prove the effectiveness of the proposed method and the flexibility of IGTFLV.

Environmental effects on passive thermal control materials of the space station freedom

NASA Astrophysics Data System (ADS)

Jones, C. A.; David, K. E.; LeVesque, R. J.; Babel, H. W.

The long-life Space Station Freedom (SSF) has power and weight requirements that are not to be exceeded during the detailed design development. There are requirements for both minimum and maximum temperatures associated with allowable fluid temperature ranges as well as prevention of astronaut injury during extravehicular activity, such as frozen or burned skin. In selected areas, temperature gradients must be controlled to prevent distortion of the primary structure. SSF will fly in low Earth orbit, in which atomic oxygen, ultraviolet radiation, meteoroid/orbital debris impacts, and plasma coupling are considered some of the most damaging constituents. These, in conjunction with hardware-induced contamination, required McDonnell Douglas Aerospace to focus on thermal control coatings based on the more durable metals, oxides, and fluorinated polymers. This paper describes the approach and rationale that McDonnell Douglas Aerospace employed for SSF Work Package 2 to provide the required thermal control coatings and insulation to ensure that the operational temperatures remain within acceptable limits.

[Applying dose banding to the production of antineoplastic drugs: a narrative review of the literature].

PubMed

Pérez Huertas, Pablo; Cueto Sola, Margarita; Escobar Cava, Paloma; Borrell García, Carmela; Albert Marí, Asunción; López Briz, Eduardo; Poveda Andrés, José Luis

2015-07-01

The dosage of antineoplastic drugs has historically been based on individualized prescription and preparation according to body surface area or patient´s weight. Lack of resources and increased assistance workload in the areas where chemotherapy is made, are leading to the development of new systems to optimize the processing without reducing safety. One of the strategies that has been proposed is the elaboration by dose banding. This new approach standardizes the antineoplastic agents doses by making ranges or bands accepting a percentage of maximum variation. It aims to reduce processing time with the consequent reduction in waiting time for patients; to reduce errors in the manufacturing process and to promote the rational drug use. In conclusion, dose banding is a suitable method for optimizing the development of anticancer drugs, obtaining reductions in oncologic patients waiting time but without actually causing a favorable impact on direct or indirect costs. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

78 FR 7768 - Public Service Company of Colorado; Notice of Application Accepted for Filing, Soliciting Motions...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... project. The normal daily operation cycle involves pumping water from the lower reservoir to the upper... acre upper reservoir with 1,087 acre-feet of usable storage between the maximum operating elevation of... lower reservoir with 1,221 acre-feet of usable storage between the maximum operating elevation of 10,002...

46 CFR 151.04-1 - Certificate of inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Inspection and Certification § 151.04-1 Certificate of... maximum cargo weight (short tons), maximum density (pounds per gallon) and any operating limitations and a...

46 CFR 151.04-1 - Certificate of inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Inspection and Certification § 151.04-1 Certificate of... maximum cargo weight (short tons), maximum density (pounds per gallon) and any operating limitations and a...

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149...

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149...

Binge Eating and Weight Control: The Role of Experiential Avoidance

ERIC Educational Resources Information Center

Lillis, Jason; Hayes, Steven C.; Levin, Michael E.

2011-01-01

Two thirds of the adults in the United States are overweight or obese. Binge eating is a barrier to treatment adherence and sustained weight loss, and can be seen as a form of experiential avoidance. The current study analyzed the impact of binge eating on weight reduction in a previously published study of a 1-day acceptance and commitment…

An Open Trial of an Acceptance-Based Behavioral Intervention for Weight Loss

ERIC Educational Resources Information Center

Forman, Evan M.; Butryn, Meghan L.; Hoffman, Kimberly L.; Herbert, James D.

2009-01-01

Innovative approaches are urgently needed to improve behavioral treatment for weight loss. The weight regain that is so common after treatment may be a result of an environment that makes it challenging to adhere, long-term, to a dietary and physical activity regimen. This study was designed to test, via a 12-week open trial, the preliminary…

Co-Rumination of Fat Talk and Weight Control Practices: An Application of Confirmation Theory.

PubMed

Arroyo, Analisa; Segrin, Chris; Harwood, Jake; Bonito, Joseph A

2017-04-01

Grounded in confirmation theory, the current research sought to explore the relationship between co-rumination of fat talk and weight control practices (i.e., binging and purging, exercising, and healthy eating behaviors), with a particular interest in whether perceptions of friends' responses during these interactions exacerbate or mitigate this relationship. Female friendship dyads completed online questionnaires at three time points across 2 weeks. Multilevel modeling analyses revealed that (a) co-rumination was positively associated with binging and purging and exercising, (b) women who perceived their friends as accepting reported less binging and purging, more exercising, and more healthy eating behaviors, (c) acceptance and challenge interacted to predict binging and purging, (d) acceptance moderated the relationships between co-rumination and binging and purging, and (e) challenge moderated the relationship between co-rumination and healthy eating behaviors.

Estimation and Testing of Partial Covariances, Correlations, and Regression Weights Using Maximum Likelihood Factor Analysis.

ERIC Educational Resources Information Center

And Others; Werts, Charles E.

1979-01-01

It is shown how partial covariance, part and partial correlation, and regression weights can be estimated and tested for significance by means of a factor analytic model. Comparable partial covariance, correlations, and regression weights have identical significance tests. (Author)

An Empirical Comparison of Discrete Choice Experiment and Best-Worst Scaling to Estimate Stakeholders' Risk Tolerance for Hip Replacement Surgery.

PubMed

van Dijk, Joris D; Groothuis-Oudshoorn, Catharina G M; Marshall, Deborah A; IJzerman, Maarten J

2016-06-01

Previous studies have been inconclusive regarding the validity and reliability of preference elicitation methods. The aim of this study was to compare the metrics obtained from a discrete choice experiment (DCE) and profile-case best-worst scaling (BWS) with respect to hip replacement. We surveyed the general US population of men aged 45 to 65 years, and potentially eligible for hip replacement surgery. The survey included sociodemographic questions, eight DCE questions, and twelve BWS questions. Attributes were the probability of a first and second revision, pain relief, ability to participate in sports and perform daily activities, and length of hospital stay. Conditional logit analysis was used to estimate attribute weights, level preferences, and the maximum acceptable risk (MAR) for undergoing revision surgery in six hypothetical treatment scenarios with different attribute levels. A total of 429 (96%) respondents were included. Comparable attribute weights and level preferences were found for both BWS and DCE. Preferences were greatest for hip replacement surgery with high pain relief and the ability to participate in sports and perform daily activities. Although the estimated MARs for revision surgery followed the same trend, the MARs were systematically higher in five of the six scenarios using DCE. This study confirms previous findings that BWS or DCEs are comparable in estimating attribute weights and level preferences. However, the risk tolerance threshold based on the estimation of MAR differs between these methods, possibly leading to inconsistency in comparing treatment scenarios. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Biofeedback in Partial Weight Bearing: Usability of Two Different Devices from a Patient's and Physical Therapist's Perspective.

PubMed

van Lieshout, Remko; Pisters, Martijn F; Vanwanseele, Benedicte; de Bie, Rob A; Wouters, Eveline J; Stukstette, Mirelle J

2016-01-01

Partial weight bearing is frequently instructed by physical therapists in patients after lower-limb trauma or surgery. The use of biofeedback devices seems promising to improve the patient's compliance with weight-bearing instructions. SmartStep and OpenGo-Science are biofeedback devices that provide real-time feedback. For a successful implementation, usability of the devices is a critical aspect and should be tested from a user's perspective. To describe the usability from the physical therapists' and a patients' perspective of Smartstep and OpenGo-Science to provide feedback on partial weight bearing during supervised rehabilitation of patients after lower-limb trauma or surgery. In a convergent mixed-methods design, qualitative and quantitative data were collected. Usability was subdivided into user performance, satisfaction and acceptability. Patients prescribed with partial weight bearing and their physical therapists were asked to use SmartStep and OpenGo-Science during supervised rehabilitation. Usability was qualitatively tested by a think-aloud method and a semi-structured interview and quantitatively tested by the System-Usability-Scale (SUS) and closed questions. For the qualitative data thematic content analyses were used. Nine pairs of physical therapists and their patients participated. The mean SUS scores for patients and physical therapists were for SmartStep 70 and 53, and for OpenGo-Science 79 and 81, respectively. Scores were interpreted with the Curved Grading Scale. The qualitative data showed that there were mixed views and perceptions from patients and physical therapists on satisfaction and acceptability. This study gives insight in the usability of two biofeedback devices from the patient's and physical therapist's perspective. The overall usability from both perspectives seemed to be acceptable for OpenGo-Science. For SmartStep, overall usability seemed only acceptable from the patient's perspective. The study findings could help clinicians to decide which biofeedback device is appropriate for their given situation and provide information for future development of biofeedback devices.

Development of a Weight Loss Mobile App Linked With an Accelerometer for Use in the Clinic: Usability, Acceptability, and Early Testing of its Impact on the Patient-Doctor Relationship.

PubMed

Choo, Seryung; Kim, Ju Young; Jung, Se Young; Kim, Sarah; Kim, Jeong Eun; Han, Jong Soo; Kim, Sohye; Kim, Jeong Hyun; Kim, Jeehye; Kim, Yongseok; Kim, Dongouk; Steinhubl, Steve

2016-03-31

Although complications of obesity are well acknowledged and managed by clinicians, management of obesity itself is often difficult, which leads to its underdiagnosis and undertreatment in hospital settings. However, tools that could improve the management of obesity, including self-monitoring, engagement with a social network, and open channels of communication between the patient and doctor, are limited in a clinic-based setting. The objective of our study was to evaluate the usability and acceptability of a newly developed mobile app linked with an accelerometer and its early effects on patient-doctor relationships. From September 2013 to February 2014, we developed a mobile app linked with an accelerometer as a supportive tool for a clinic-based weight loss program. The app used information from electronic health records and delivered tailored educational material. Personal goal setting, as well as monitoring of weight changes and physical activity combined with feedback, are key features of the app. We also incorporated an interactive message board for patients and doctors. During the period of March 2014 to May 2014, we tested our mobile app for 1 month in participants in a hospital clinic setting. We assessed the app's usability and acceptability, as well as the patient-doctor relationship, via questionnaires and analysis of app usage data. We recruited 30 individuals (18 male and 12 female) for the study. The median number of log-ins per day was 1.21, with the most frequently requested item being setting goals, followed by track physical activities and view personal health status. Scales of the depth of the patient-doctor relationship decreased from 27.6 (SD 4.8) to 25.1 (SD 4.5) by a Wilcoxon signed rank test (P=.02). A mobile phone app linked with an accelerometer for a clinic-based weight loss program is useful and acceptable for weight management but exhibited less favorable early effects on patient-doctor relationships.

46 CFR 164.023-13 - Production tests and inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Constant Rate of Traverse tensile testing machine, capable of initial clamp separation of ten inches and a... the acceptance testing values but not less than the performance minimums. (2) Length/weight values must be within 5 percent of the acceptance testing values but not less than the performance minimums...

Middle-aged women's decisions about body weight management: needs assessment and testing of a knowledge translation tool.

PubMed

Stacey, Dawn; Jull, Janet; Beach, Sarah; Dumas, Alex; Strychar, Irene; Adamo, Kristi; Brochu, Martin; Prud'homme, Denis

2015-04-01

This study aims to assess middle-aged women's needs when making body weight management decisions and to evaluate a knowledge translation tool for addressing their needs. A mixed-methods study used an interview-guided theory-based survey of professional women aged 40 to 65 years. The tool summarized evidence to address their needs and enabled women to monitor actions taken. Acceptability and usability were reported descriptively. Sixty female participants had a mean body mass index of 28.0 kg/m(2) (range, 17.0-44.9 kg/m(2)), and half were premenopausal. Common options for losing (82%) or maintaining (18%) weight included increasing physical activity (60%), eating healthier (57%), and getting support (40%). Decision-making involved getting information on options (52%), soliciting others' decisions/advice (20%), and being self-motivated (20%). Preferred information sources included written information (97%), counseling (90%), and social networking websites (43%). Five professionals (dietitian, personal trainer, occupational therapist, and two physicians) had similar responses. Of 53 women sent the tool, 27 provided acceptability feedback. They rated it as good to excellent for information on menopause (96%), body weight changes (85%), and managing body weight (85%). Most would tell others about it (81%). After 4 weeks of use, 25 women reported that the wording made sense (96%) and that the tool had clear instructions (92%) and was easy to use across time (88%). The amount of information was rated as just right (64%), but the tool had limited space for responding (72%). When making decisions about body weight management, women's needs were "getting information" and "getting support." The knowledge translation tool was acceptable and usable, but further evaluation is required.

Middle-aged women’s decisions about body weight management: needs assessment and testing of a knowledge translation tool

PubMed Central

Stacey, Dawn; Jull, Janet; Beach, Sarah; Dumas, Alex; Strychar, Irene; Adamo, Kristi; Brochu, Martin; Prud’homme, Denis

2015-01-01

Abstract Objective This study aims to assess middle-aged women’s needs when making body weight management decisions and to evaluate a knowledge translation tool for addressing their needs. Methods A mixed-methods study used an interview-guided theory-based survey of professional women aged 40 to 65 years. The tool summarized evidence to address their needs and enabled women to monitor actions taken. Acceptability and usability were reported descriptively. Results Sixty female participants had a mean body mass index of 28.0 kg/m2 (range, 17.0-44.9 kg/m2), and half were premenopausal. Common options for losing (82%) or maintaining (18%) weight included increasing physical activity (60%), eating healthier (57%), and getting support (40%). Decision-making involved getting information on options (52%), soliciting others’ decisions/advice (20%), and being self-motivated (20%). Preferred information sources included written information (97%), counseling (90%), and social networking websites (43%). Five professionals (dietitian, personal trainer, occupational therapist, and two physicians) had similar responses. Of 53 women sent the tool, 27 provided acceptability feedback. They rated it as good to excellent for information on menopause (96%), body weight changes (85%), and managing body weight (85%). Most would tell others about it (81%). After 4 weeks of use, 25 women reported that the wording made sense (96%) and that the tool had clear instructions (92%) and was easy to use across time (88%). The amount of information was rated as just right (64%), but the tool had limited space for responding (72%). Conclusions When making decisions about body weight management, women’s needs were “getting information” and “getting support.” The knowledge translation tool was acceptable and usable, but further evaluation is required. PMID:25816120

Growth of the eye lens: II. Allometric studies

PubMed Central

2014-01-01

Purpose The purpose of this study was to examine the ontogeny and phylogeny of lens growth in a variety of species using allometry. Methods Data on the accumulation of wet and/or dry lens weight as a function of bodyweight were obtained for 40 species and subjected to allometric analysis to examine ontogenic growth and compaction. Allometric analysis was also used to compare the maximum adult lens weights for 147 species with the maximum adult bodyweight and to compare lens volumes calculated from wet and dry weights with eye volumes calculated from axial length. Results Linear allometric relationships were obtained for the comparison of ontogenic lens and bodyweight accumulation. The body mass exponent (BME) decreased with increasing animal size from around 1.0 in small rodents to 0.4 in large ungulates for both wet and dry weights. Compaction constants for the ontogenic growth ranged from 1.00 in birds and reptiles up to 1.30 in mammals. Allometric comparison of maximum lens wet and dry weights with maximum bodyweights also yielded linear plots with a BME of 0.504 for all warm blooded species except primates which had a BME of 0.25. When lens volumes were compared with eye volumes, all species yielded a scaling constant of 0.75 but the proportionality constants for primates and birds were lower. Conclusions Ontogenic lens growth is fastest, relative to body growth, in small animals and slowest in large animals. Fiber cell compaction takes place throughout life in most species, but not in birds and reptiles. Maximum adult lens size scales with eye size with the same exponent in all species, but birds and primates have smaller lenses relative to eye size than other species. Optical properties of the lens are generated through the combination of variations in the rate of growth, rate of compaction, shape and size. PMID:24715759

Association between weight perception and psychological distress.

PubMed

Atlantis, E; Ball, K

2008-04-01

Obesity is a well-known cause of cardiovascular disease burden and premature death, but effects on depressive symptoms remain equivocal. Depressive symptoms may be more common among the obese individuals who perceive themselves as overweight, rather than those who perceive themselves as having an acceptable weight. Our aim was to determine whether weight status and weight perceptions are independently associated with psychological distress. We conducted a cross-sectional study using data from the Australian National Health Survey 2004-2005 (N=17 253). All variables were collected by self-report. Adjusted multinomial logistic regression analysis was conducted to generate prevalence odds ratios with 95% confidence intervals (95% CI) for medium (Kessler Psychological Distress Scale (K10) scores of 20-29) and high (K10 scores of 30-50) psychological distress (compared with K10 scores of 10-19 as the reference) associated with weight status (standard body mass index (BMI) cutoffs for underweight, overweight and obesity vs normal weight), weight perception (perceived underweight and overweight vs acceptable weight) and weight misperception (incorrect with BMI vs correct with BMI) adjusting for numerous important covariates. Overweight and underweight perception increased the odds of medium (40 and 50%) and high (50 and 120%) psychological distress, whereas weight status and weight misperception were not associated with psychological distress in adjusted analysis. Gender, alcohol consumed per week and post-school education were not significant covariates (at P<0.10 level). Overweight and underweight perception rather than weight status or weight misperception are significant risk factors associated with medium and high psychological distress prevalence and effects appear to be uniform for men and women. Well-designed prospective studies are still needed to determine whether weight perceptions cause psychological distress, and if so, whether symptoms are significantly reduced following effective intervention.

Neonates with Bartter syndrome have enormous fluid and sodium requirements.

PubMed

Azzi, Antonio; Chehade, Hassib; Deschênes, Georges

2015-07-01

Managing neonatal Bartter syndrome by achieving adequate weight gain is challenging. We assessed the correlation between weight gain in neonatal Bartter syndrome and the introduction of fluid and sodium supplementations and indomethacin during the first 4 weeks of life. Daily fluid and electrolytes requirements were analysed using linear regression and Spearman correlation coefficients. The weight gain coefficient was calculated as daily weight gain after physiological neonatal weight loss. We studied seven infants. The highest weight gain coefficients occurred between weeks two and four in the five neonates who either received prompt amounts of fluid (maximum 810 mL/kg/day) and sodium (maximum 70 mmol/kg/day) or were treated with indomethacin. For the two patients with the highest weight gain coefficient, water and sodium supplementations were decreased in weeks two to four leading to a significant negative Spearman correlation between weight gain and fluid supplements (r = -0.55 and -0.68) and weight gain and sodium supplementations (r = -0.96 and -0.72). The two patients with the lowest weight gain coefficient had positive Spearman correlation coefficients between weight gain and fluid and sodium supplementations. Infants with neonatal Bartter syndrome required rapid and enormous fluid and sodium supplementations or the early introduction of indomethacin treatment to achieve adequate weight gain during the early postnatal period. ©2015 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Feasibility and acceptability of a physician-delivered weight management programme.

PubMed

Sturgiss, Elizabeth A; Elmitt, Nicholas; Haesler, Emily; van Weel, Chris; Douglas, Kirsty

2017-02-01

Primary health care requires new approaches to assist patients with overweight and obesity. This is a particular concern for patients with limited access to specialist or allied health services due to financial cost or location. The Change Program is a toolkit that provides a structured approach for GPs working with patients on weight management. To assess the acceptability and feasibility of a GP-delivered weight management programme. A feasibility trial in five Australian general practices with 12 GPs and 23 patients. Mixed methods were used to assess the objective through participant interviews, online surveys and the NOrmalization MeAsure Development (NoMAD) tool based on Normalization Process Theory. Content analysis of interviews is presented alongside Likert scales, free text and the NoMAD tool. The Change Program was acceptable to most GPs and patients. It was best suited to patient-GP dyads where the patient felt a strong preference for GP involvement. Patients' main concerns were the time and possible cost associated with the programme if run outside a research setting. For sustainable implementation, it would have been preferable to recruit a whole practice rather than single GPs to enable activation of systems to support the programme. A GP-delivered weight management programme is feasible and acceptable for patients with obesity in Australian primary health care. The addition of this structured toolkit to support GPs is particularly important for patients with a strong preference for GP involvement or who are unable to access other resources due to cost or location. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Major International R and D Ranges and Test Facilities. Summary of Capabilities

DTIC Science & Technology

1990-01-01

with a maximum impulse of firing of large numbers of rounds by a weapon in order to 1500 G and a maximum test item weight of 200 pounds. produce...millimetres may be fired safely, using test item weight of 1,000 pounds. training practice or training practice tracer ammunition. The :ange butts consist of...predictions of coherent sound propagation loss in the ocean. This information is useful in estimating the performance of low-frequency passive sonars

Nickel-chromium-silicon brazing filler metal

DOEpatents

Martini, Angelo J.; Gourley, Bruce R.

1976-01-01

A brazing filler metal containing, by weight percent, 23-35% chromium, 9-12% silicon, a maximum of 0.15% carbon, and the remainder nickel. The maximum amount of elements other than those noted above is 1.00%.

Automatic treatment plan re-optimization for adaptive radiotherapy guided with the initial plan DVHs.

PubMed

Li, Nan; Zarepisheh, Masoud; Uribe-Sanchez, Andres; Moore, Kevin; Tian, Zhen; Zhen, Xin; Graves, Yan Jiang; Gautier, Quentin; Mell, Loren; Zhou, Linghong; Jia, Xun; Jiang, Steve

2013-12-21

Adaptive radiation therapy (ART) can reduce normal tissue toxicity and/or improve tumor control through treatment adaptations based on the current patient anatomy. Developing an efficient and effective re-planning algorithm is an important step toward the clinical realization of ART. For the re-planning process, manual trial-and-error approach to fine-tune planning parameters is time-consuming and is usually considered unpractical, especially for online ART. It is desirable to automate this step to yield a plan of acceptable quality with minimal interventions. In ART, prior information in the original plan is available, such as dose-volume histogram (DVH), which can be employed to facilitate the automatic re-planning process. The goal of this work is to develop an automatic re-planning algorithm to generate a plan with similar, or possibly better, DVH curves compared with the clinically delivered original plan. Specifically, our algorithm iterates the following two loops. An inner loop is the traditional fluence map optimization, in which we optimize a quadratic objective function penalizing the deviation of the dose received by each voxel from its prescribed or threshold dose with a set of fixed voxel weighting factors. In outer loop, the voxel weighting factors in the objective function are adjusted according to the deviation of the current DVH curves from those in the original plan. The process is repeated until the DVH curves are acceptable or maximum iteration step is reached. The whole algorithm is implemented on GPU for high efficiency. The feasibility of our algorithm has been demonstrated with three head-and-neck cancer IMRT cases, each having an initial planning CT scan and another treatment CT scan acquired in the middle of treatment course. Compared with the DVH curves in the original plan, the DVH curves in the resulting plan using our algorithm with 30 iterations are better for almost all structures. The re-optimization process takes about 30 s using our in-house optimization engine.

Effect of electron-hole asymmetry on optical conductivity in 8 -P m m n borophene

NASA Astrophysics Data System (ADS)

Verma, Sonu; Mawrie, Alestin; Ghosh, Tarun Kanti

2017-10-01

We present a detailed theoretical study of the Drude weight and optical conductivity of 8-P m m n borophene having tilted anisotropic Dirac cones. We provide exact analytical expressions of x x and y y components of the Drude weight as well as maximum optical conductivity. We also obtain exact analytical expressions of the minimum energy (ɛ1) required to trigger the optical transitions and energy (ɛ2) needed to attain maximum optical conductivity. We find that the Drude weight and optical conductivity are highly anisotropic as a consequence of the anisotropic Dirac cone. The optical conductivities have a nonmonotonic behavior with photon energy in the regime between ɛ1 and ɛ2, as a result of the tilted parameter vt. The tilted parameter can be extracted by knowing ɛ1 and ɛ2 from optical measurements. The maximum values of the components of the optical conductivity do not depend on the carrier density and the tilted parameter. The product of the maximum values of the anisotropic conductivities has the universal value (e2/4ℏ ) 2. The tilted anisotropic Dirac cones in 8-P m m n borophene can be realized by the optical conductivity measurement.

14 CFR 29.321 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... load factor must be assumed to act normal to the longitudinal axis of the rotorcraft, and to be equal... from the design minimum weight to the design maximum weight; and (2) With any practical distribution of...

Comparison in lower leg neuromuscular activity between runners with unilateral mid-portion Achilles tendinopathy and healthy individuals.

PubMed

Baur, Heiner; Müller, Steffen; Hirschmüller, Anja; Cassel, Michael; Weber, Josefine; Mayer, Frank

2011-06-01

Neuromuscular control in functional situations and possible impairments due to Achilles tendinopathy are not well understood. Thirty controls (CO) and 30 runners with Achilles tendinopathy (AT) were tested on a treadmill at 3.33 ms(-1) (12 km h(-1)). Neuromuscular activity of the lower leg (tibialis anterior, peroneal, and gastrocnemius muscle) was measured by surface electromyography. Mean amplitude values (MAV) for the gait cycle phases preactivation, weight acceptance and push-off were calculated and normalised to the mean activity of the entire gait cycle. MAVs of the tibialis anterior did not differ between CO and AT in any gait cycle phase. The activation of the peroneal muscle was lower in AT in weight acceptance (p=0.006), whereas no difference between CO and AT was found in preactivation (p=0.71) and push-off (p=0.83). Also, MAVs of the gastrocnemius muscle did not differ between AT and CO in preactivity (p=0.71) but were reduced in AT during weight acceptance (p=0.001) and push-off (p=0.04). Achilles tendinopathy does not seem to alter pre-programmed neural control but might induce mechanical deficits of the lower extremity during weight bearing (joint stability). This should be addressed in the therapy process of AT. Copyright © 2010 Elsevier Ltd. All rights reserved.

75 FR 78985 - County of DuPage; Notice of Preliminary Permit Application Accepted for Filing and Soliciting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... (upper reservoir) having a total storage capacity of 8,145 acre- feet at a normal maximum operating... reservoir) 250 feet below the bottom of the upper reservoir having a total/usable storage capacity of 7,465 acre-feet at normal maximum operation elevation of 210 feet msl; (5) a powerhouse with approximate...

Effect of psychological distress on weight concern and weight control behaviors.

PubMed

Roohafza, Hamidreza; Kabir, Ali; Sadeghi, Masoumeh; Shokouh, Pedram; Aalaei-Andabili, Seyed Hossein; Mehrabi, Yadollah; Sarrafzadegan, Nizal

2014-09-01

Obesity is associated with chronic disorders like coronary artery diseases, metabolic syndrome, cancers, and psychiatric disorders. Stress may contribute to weight gain by disrupting weight concern, and lead to uncontrolled eating behavior. This study aimed to investigate the effects of stress on weight concern and control behaviors in normal weight and obese adults. A total of 9544 subjects were selected by multi-stage random sampling from three provinces in central Iran. Information related to weight concern and control behavior was registered in normal weight and obese participants. Psychological distress was measured by a 12-item General Health Questionnaire (GHQ-12) and subjects were divided into high and low stress groups. Logistic regression was used for analysis. The mean age of participants was 38.7 ± 15.5 years and 50% (4772) of them were males. The adjusted odds ratio (OR) for age, sex and education of high stress to low stress level for weight concern, weight control behavior and acceptable physical activity behavior was more than 1; but the OR was less than 1 for waist circumference, obesity and healthy diet behavior. Among obese participants, higher levels of stress were associated with lower weight concern with OR, 95%CI: 0.821, (0.682 - 0.988), lower acceptable physical activity with OR = 0.833, 95%CI: (0.624 - 0.912), but higher rates of healthy diet behavior with OR = 1.360, 95% CI: (1.040 - 1.780). Individuals with high stress level have lower weight concern and lower physical activity; therefore, they are prone to weight gain and obesity. It could be concluded that stress management should be considered as a crucial component of obesity prevention and control programs.

Effects of squat lift training and free weight muscle training on maximum lifting load and isolinetic peak torque of young adults without impairments.

PubMed

Yeung, S S; Ng, G Y

2000-06-01

Manual lifting is a frequent cause of back injury, and there is no evidence as to which training mode can provide the best training effect for lifting performance and muscle force. The purpose of this study was to examine the effects of a squat lift training and a free weight muscle training program on the maximum lifting load and isokinetic peak torque in subjects without known neuromuscular or musculoskeletal impairments. Thirty-six adults (20 male, 16 female) without known neuromuscular or musculoskeletal impairments participated. The subjects' mean age was 21.25 years (SD=1.16, range=20-24). Subjects were divided into 3 groups. Subjects in group 1 (n=12) performed squat lift training. Subjects in group 2 (n=12) participated in free weight resistance training of their shoulder abductors, elbow flexors, knee extensors and trunk extensors. Subjects in group 3 (n=12) served as controls. The maximum lifting load and isokinetic peak torques of the trunk extensors, knee extensors, elbow flexors, and shoulder abductors of each subject were measured before and after the study. Training was conducted on alternate days for 4 weeks, with an initial load of 80% of each subject's maximum capacity and with the load increased by 5% weekly. All groups were comparable for all measured variables before the study. After 4 weeks, subjects in groups 1 and 2 demonstrated more improvement in maximum lifting load and isokinetic peak torque of the back extensors compared with the subjects in group 3, but the 2 training groups were not different. The findings demonstrate that both squat lift and free weight resistance training are equally effective in improving the lifting load and isokinetic back extension performance of individuals without impairments.

Alterations in apparent diffusion coefficient values of the kidney during the cardiac cycle: Evaluation with ECG-triggered diffusion-weighted MR imaging.

PubMed

Ito, Katsuyoshi; Hayashida, Minoru; Kanki, Akihiko; Yamamoto, Akira; Tamada, Tsutomu; Yoshida, Koji; Tanabe, Masahiro

2018-05-17

To evaluate dynamic changes in apparent diffusion coefficient (ADC) values of the kidney at different time points during the cardiac cycle using electrocardiographic (ECG)-triggered diffusion-weighted MR imaging in normal subjects, and to elucidate the differences in ADC values between the right and left kidneys during a cardiac cycle. The study was approved by our institutional review board and informed consent was obtained from subjects. Twenty healthy volunteers who underwent ECG-triggered diffusion-weighted MR imaging of the kidney were included. The differences in ADC values of each kidney during different cardiac phases were compared. Additionally, the differences in maximum and minimum ADC values between the right and left kidney were also evaluated. ADC values in the right and left kidney changed significantly during the cardiac cycle (P < 0.00001). Maximum and minimum ADC values during the cardiac cycle of the left kidney were significantly higher (P = 0.026 and 0.017, respectively) than those of the right kidney. Maximum ADC value in the left kidney had a significantly strong positive correlation with the left renal vein ratio (r = 0.83, P < 0.00001). In the right kidney, maximum ADC showed a weakly positive correlation with the diameter of the right renal vein (r = 0.45, P = 0.048). ADC values of the kidney obtained using ECG-triggered diffusion-weighted MR imaging change significantly during the cardiac cycle. Maximum (systolic) ADC during the cardiac cycle of the left kidney was significantly higher than that of the right kidney, probably due to the anatomical difference in the renal vein. Copyright © 2018 Elsevier Inc. All rights reserved.

[A contribution safety on using low molecular weight heparin in patients with renal failure].

PubMed

Gea Rodríguez, E; Barral Viñals, N; Manso Mardones, P; Indo Berges, O

2004-01-01

1. To promote safe and appropriate use of low molecular weight heparins in patients with renal failure. 2. To analyze results from a pharmaceutical intervention program. Data from a prospective, 16-month study are presented. The entire adult population of a general hospital with 41,792 stays/year is included. An intensive monitoring program for low molecular weight heparin prescriptions in patients with renal failure is implemented. This program identifies patients using a computerized unit dose system, and is aided by a software able to calculate creatinine clearance using the Cockroft-Gault formula from an interphase between laboratory, pharmacy and admissions data, and by an algorithm to establish a recommended pharmaceutical intervention according to renal failure severity and low molecular weight heparin indication, either with prophylactic or therapeutic purposes. In all, 221 patients were identified, corresponding to 2.9% of admitted patients and 25.5% of patients with renal failure. Answers were assessable for 128 patients (61%). Extent of program acceptance according to physician-accepted pharmaceutical interventions was proportional to renal failure severity and therapy intensiveness. An acceptance of 70% was obtained for treatments with clearance < 30 mL/min, of 41.8% for treatments with 30-60 mL/min, of 31.5% for prophylaxis, and of 21.4% for low-risk patients. 1. Program repercussions improve prescription safety. 2. Scarce literature and a belief in low molecular weight heparin safety account for responses regarding pharmaceutical intervention. 3. Integrated computerized systems are essential for the implementation of intensive pharmaceutical care programs.

75 FR 68656 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... Shares to 99,000,000 Shares November 2, 2010. Pursuant to Section 19(b)(1) \\1\\ of the Securities Exchange... size accepted by Floor broker systems from 25,000,000 shares to 99,000,000 shares. The text of the... systems shall accept a maximum order size of 99,000,000, an increase from the current 25,000,000 share...

Algal culture studies related to a closed ecological life support system

NASA Technical Reports Server (NTRS)

Radmer, R.; Behrens, P.; Fernandez, E.; Ollinger, O.; Howell, C.

1984-01-01

Studies on the steady-state long-term (4 month) culture of Scenedesmus obliquus algae, maintained in an annular air-lift column operated as a turbidostat, were carried out to evaluate the life-supporting possibilities of this system. Chlorophyll production and cell number as functions of the dry weight were linear at constant illumination. Productivity (measured as the product of dry weight, mg/ml, and the growth rate, ml/hr) vs. dry weight rose linearly until the cell density reached a level at which light became limiting (89 percent absorption of the photosynthetically active radiation). In the initial, linear portion of the curve, the productivity was limited by cell growth at the given light intensity. The maximum dilution rate of the system corresponded to the doubling time of 13.4 hr, about half the maximum rate, with a productivity of 80 percent of the maximum theoretical productivity. The high light utilization efficiencies were contributed by the low (10 percent of full sunlight) incident intensities.

Strengthening of bridge columns subjected to an impact lateral load caused by vehicle collision : phase I final report.

DOT National Transportation Integrated Search

2011-08-01

"Fiber reinforced polymer (FRP) materials have gained wide acceptance for repair and retrofit of existing infrastructures or to design new infrastructures due to their desirable properties (high strength to weight ratio, light weight and consequent e...

An open trial of Acceptance-based Separated Family Treatment (ASFT) for adolescents with anorexia nervosa.

PubMed

Timko, C Alix; Zucker, Nancy L; Herbert, James D; Rodriguez, Daniel; Merwin, Rhonda M

2015-06-01

Family based-treatments have the most empirical support in the treatment of adolescent anorexia nervosa; yet, a significant percentage of adolescents and their families do not respond to manualized family based treatment (FBT). The aim of this open trial was to conduct a preliminary evaluation of an innovative family-based approach to the treatment of anorexia: Acceptance-based Separated Family Treatment (ASFT). Treatment was grounded in Acceptance and Commitment Therapy (ACT), delivered in a separated format, and included an ACT-informed skills program. Adolescents (ages 12-18) with anorexia or sub-threshold anorexia and their families received 20 treatment sessions over 24 weeks. Outcome indices included eating disorder symptomatology reported by the parent and adolescent, percentage of expected body weight achieved, and changes in psychological acceptance/avoidance. Half of the adolescents (48.0%) met criteria for full remission at the end of treatment, 29.8% met criteria for partial remission, and 21.3% did not improve. Overall, adolescents had a significant reduction in eating disorder symptoms and reached expected body weight. Treatment resulted in changes in psychological acceptance in the expected direction for both parents and adolescents. This open trial provides preliminary evidence for the feasibility, acceptability, and efficacy of ASFT for adolescents with anorexia. Directions for future research are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

Data and performances of selected aircraft and rotorcraft

NASA Astrophysics Data System (ADS)

Filippone, Antonio

2000-11-01

The purpose of this article is to provide a synthetic and comparative view of selected aircraft and rotorcraft (nearly 300 of them) from past and present. We report geometric characteristics of wings (wing span, areas, aspect-ratios, sweep angles, dihedral/anhedral angles, thickness ratios at root and tips, taper ratios) and rotor blades (type of rotor, diameter, number of blades, solidity, rpm, tip Mach numbers); aerodynamic data (drag coefficients at zero lift, cruise and maximum absolute glide ratio); performances (wing and disk loadings, maximum absolute Mach number, cruise Mach number, service ceiling, rate of climb, centrifugal acceleration limits, maximum take-off weight, maximum payload, thrust-to-weight ratios). There are additional data on wing types, high-lift devices, noise levels at take-off and landing. The data are presented on tables for each aircraft class. A graphic analysis offers a comparative look at all types of data. Accuracy levels are provided wherever available.

15 CFR 10.6 - Procedures for acceptance of a recommended standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., divided by three. No consideration will be given to volume of production or volume of distribution in... who use or consume the product covered by the standard. (8) “Acceptance by volume of production” means.... The weighting of each response will be made in accordance with the volume of production represented by...

Evaluation of regulatory variation and theoretical health risk for pesticide maximum residue limits in food.

PubMed

Li, Zijian

2018-08-01

To evaluate whether pesticide maximum residue limits (MRLs) can protect public health, a deterministic dietary risk assessment of maximum pesticide legal exposure was conducted to convert global MRLs to theoretical maximum dose intake (TMDI) values by estimating the average food intake rate and human body weight for each country. A total of 114 nations (58% of the total nations in the world) and two international organizations, including the European Union (EU) and Codex (WHO) have regulated at least one of the most currently used pesticides in at least one of the most consumed agricultural commodities. In this study, 14 of the most commonly used pesticides and 12 of the most commonly consumed agricultural commodities were identified and selected for analysis. A health risk analysis indicated that nearly 30% of the computed pesticide TMDI values were greater than the acceptable daily intake (ADI) values; however, many nations lack common pesticide MRLs in many commonly consumed foods and other human exposure pathways, such as soil, water, and air were not considered. Normality tests of the TMDI values set indicated that all distributions had a right skewness due to large TMDI clusters at the low end of the distribution, which were caused by some strict pesticide MRLs regulated by the EU (normally a default MRL of 0.01 mg/kg when essential data are missing). The Box-Cox transformation and optimal lambda (λ) were applied to these TMDI distributions, and normality tests of the transformed data set indicated that the power transformed TMDI values of at least eight pesticides presented a normal distribution. It was concluded that unifying strict pesticide MRLs by nations worldwide could significantly skew the distribution of TMDI values to the right, lower the legal exposure to pesticide, and effectively control human health risks. Copyright © 2018 Elsevier Ltd. All rights reserved.

14 CFR 23.343 - Design fuel loads.

Code of Federal Regulations, 2012 CFR

2012-01-01

... zero fuel to the selected maximum fuel load. (b) If fuel is carried in the wings, the maximum allowable weight of the airplane without any fuel in the wing tank(s) must be established as “maximum zero wing... part and— (1) The structure must be designed to withstand a condition of zero fuel in the wing at limit...

14 CFR 23.343 - Design fuel loads.

Code of Federal Regulations, 2014 CFR

2014-01-01

... zero fuel to the selected maximum fuel load. (b) If fuel is carried in the wings, the maximum allowable weight of the airplane without any fuel in the wing tank(s) must be established as “maximum zero wing... part and— (1) The structure must be designed to withstand a condition of zero fuel in the wing at limit...

14 CFR 23.343 - Design fuel loads.

Code of Federal Regulations, 2011 CFR

2011-01-01

... zero fuel to the selected maximum fuel load. (b) If fuel is carried in the wings, the maximum allowable weight of the airplane without any fuel in the wing tank(s) must be established as “maximum zero wing... part and— (1) The structure must be designed to withstand a condition of zero fuel in the wing at limit...

14 CFR 23.343 - Design fuel loads.

Code of Federal Regulations, 2013 CFR

2013-01-01

... zero fuel to the selected maximum fuel load. (b) If fuel is carried in the wings, the maximum allowable weight of the airplane without any fuel in the wing tank(s) must be established as “maximum zero wing... part and— (1) The structure must be designed to withstand a condition of zero fuel in the wing at limit...

Comparison of the produced and perceived voice range profiles in untrained and trained classical singers.

PubMed

Hunter, Eric J; Svec, Jan G; Titze, Ingo R

2006-12-01

Frequency and intensity ranges (in true decibel sound pressure level, 20 microPa at 1 m) of voice production in trained and untrained vocalists were compared with the perceived dynamic range (phons) and units of loudness (sones) of the ear. Results were reported in terms of standard voice range profiles (VRPs), perceived VRPs (as predicted by accepted measures of auditory sensitivities), and a new metric labeled as an overall perceptual level construct. Trained classical singers made use of the most sensitive part of the hearing range (around 3-4 kHz) through the use of the singer's formant. When mapped onto the contours of equal loudness (depicting nonuniform spectral and dynamic sensitivities of the auditory system), the formant is perceived at an even higher sound level, as measured in phons, than a flat or A-weighted spectrum would indicate. The contributions of effects like the singer's formant and the sensitivities of the auditory system helped the trained singers produce 20% to 40% more units of loudness, as measured in sones, than the untrained singers. Trained male vocalists had a maximum overall perceptual level construct that was 40% higher than the untrained male vocalists. Although the A-weighted spectrum (commonly used in VRP measurement) is a reasonable first-order approximation of auditory sensitivities, it misrepresents the most salient part of the sensitivities (where the singer's formant is found) by nearly 10 dB.

Military Enlistment of Hispanic Youth. Obstacles and Opportunities

DTIC Science & Technology

2009-01-01

Weight, by Service, Height, and Gender . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.13. Allowable Body Fat Measurements, by Gender and...has higher minimum weight standards, as seen in Table 2.12. Applicants who exceed the maximum allowed weight are given a body- fat measurement to...determine if they exceed the allowable body- fat standards, as shown in Table 2.13. Despite having the most lenient weight standards, the Marine Corps has

Minimum Expected Risk Estimation for Near-neighbor Classification

DTIC Science & Technology

2006-04-01

We consider the problems of class probability estimation and classification when using near-neighbor classifiers, such as k-nearest neighbors ( kNN ...estimate for weighted kNN classifiers with different prior information, for a broad class of risk functions. Theory and simulations show how significant...the difference is compared to the standard maximum likelihood weighted kNN estimates. Comparisons are made with uniform weights, symmetric weights

14 CFR 35.24 - Strength.

Code of Federal Regulations, 2014 CFR

2014-01-01

... STANDARDS: PROPELLERS Design and Construction § 35.24 Strength. The maximum stresses developed in the propeller may not exceed values acceptable to the Administrator considering the particular form of...

A Deterministic Interfacial Cyclic Oxidation Spalling Model. Part 2; Algebraic Approximation, Descriptive Parameters, and Normalized Universal Curve

NASA Technical Reports Server (NTRS)

Smialek, James L.

2002-01-01

A cyclic oxidation interfacial spalling model has been developed in Part 1. The governing equations have been simplified here by substituting a new algebraic expression for the series (Good-Smialek approximation). This produced a direct relationship between cyclic oxidation weight change and model input parameters. It also allowed for the mathematical derivation of various descriptive parameters as a function of the inputs. It is shown that the maximum in weight change varies directly with the parabolic rate constant and cycle duration and inversely with the spall fraction, all to the 1/2 power. The number of cycles to reach maximum and zero weight change vary inversely with the spall fraction, and the ratio of these cycles is exactly 1:3 for most oxides. By suitably normalizing the weight change and cycle number, it is shown that all cyclic oxidation weight change model curves can be represented by one universal expression for a given oxide scale.

Constitutional basis of longevity in the cetacea: do the whales and the terrestrial mammals obey the same laws

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sacher, G.A.

1978-01-01

The maximum lifespans in captivity for terrestrial mammalian species can be estimated by means of a multiple linear regression of logarithm of lifespan (L) on the logarithm of adult brain weight (E) and body weight (S). This paper describes the application of regression formulas based on data from terrestrial mammals to the estimation of odontocete and mysticete lifespans. The regression formulas predict cetacean lifespans that are in accord with the data on maximum cetacean lifespans obtained in recent years by objective age determination procedures. More remarkable is the correct prediction by the regression formulas that the odontocete species have nearlymore » constant lifespans, almost independent of body weight over a 300:1 body weight range. This prediction is a consequence of the fact, remarkable in itself, that over this body weight range the Odontoceti have a brain:body allometric slope of 1/3, as compared to a slope of 2/3 for the Mammalia as a whole.« less

Behavioral Weight Loss for the Management of Menopausal Hot Flashes: A Pilot Study

PubMed Central

Thurston, Rebecca C.; Ewing, Linda J.; Low, Carissa A.; Christie, Aimee J.; Levine, Michele D.

2014-01-01

Objective Although adiposity has been considered protective against hot flashes, newer data suggest positive relations between flashes and adiposity. No studies have been specifically designed to test whether weight loss reduces hot flashes. This pilot study aimed to evaluate the feasibility, acceptability, and initial efficacy of behavioral weight loss to reduce hot flashes. Methods Forty overweight/obese women with hot flashes (≥4/day) were randomized to a behavioral weight loss intervention or to wait list control. Hot flashes were assessed pre- and post-intervention via physiologic monitor, diary, and questionnaire. Comparisons of changes in hot flashes and anthropometrics between conditions were tested via Wilcoxon tests. Results Study retention (83%) and intervention satisfaction (93.8%) were high. Most women (74.1%) reported that hot flash reduction was a main motivator to lose weight. Women randomized to the weight loss intervention lost more weight (-8.86 kg) than did women randomized to control (+0.23 kg, p<.0001). Women randomized to weight loss also showed greater reductions in questionnaire-reported hot flashes (2-week hot flashes: −63.0) than did women in the control (−28.0, p=.03), a difference not demonstrated in other hot flash measures. Reductions in weight and hot flashes were significantly correlated (e.g., r=.47, p=.006). Conclusions This pilot study showed a behavioral weight loss program to be feasible, acceptable, and effective in producing weight loss among overweight/obese women with hot flashes. Findings indicate the importance of a larger study designed to test behavioral weight loss for hot flash reduction. Hot flash management could motivate women to engage in this health-promoting behavior. PMID:24977456

Behavioral weight loss for the management of menopausal hot flashes: a pilot study.

PubMed

Thurston, Rebecca C; Ewing, Linda J; Low, Carissa A; Christie, Aimee J; Levine, Michele D

2015-01-01

Although adiposity has been considered to be protective against hot flashes, newer data suggest positive relationships between hot flashes and adiposity. No studies have been specifically designed to test whether weight loss reduces hot flashes. This pilot study aimed to evaluate the feasibility, acceptability, and initial efficacy of behavioral weight loss in reducing hot flashes. Forty overweight or obese women with hot flashes (≥ 4 hot flashes/d) were randomized to either behavioral weight loss intervention or wait-list control. Hot flashes were assessed before and after intervention via physiologic monitoring, diary, and questionnaire. Comparisons of changes in hot flashes and anthropometrics between conditions were performed via Wilcoxon tests. Study retention (83%) and intervention satisfaction (93.8%) were high. Most women (74.1%) reported that hot flash reduction was a major motivator for losing weight. Women randomized to the weight loss intervention lost more weight (-8.86 kg) than did women randomized to control (+0.23 kg; P < 0.0001). Women randomized to weight loss also showed greater reductions in questionnaire-reported hot flashes (2-wk hot flashes, -63.0) than did women in the control group (-28.0; P = 0.03)-a difference not demonstrated in other hot flash measures. Reductions in weight and hot flashes were significantly correlated (eg, r = 0.47, P = 0.006). This pilot study shows a behavioral weight loss program that is feasible, acceptable, and effective in producing weight loss among overweight or obese women with hot flashes. Findings indicate the importance of a larger study designed to test behavioral weight loss for hot flash reduction. Hot flash management could motivate women to engage in this health-promoting behavior.

Predicting vertical jump height from bar velocity.

PubMed

García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

2015-06-01

The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s(-2)). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r(2) = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r(2) = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key pointsVertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer.The relationship between the point at which bar acceleration is less than -9.81 m·s(-2) and the real take-off is affected by the velocity of movement.Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance.

Predicting Vertical Jump Height from Bar Velocity

PubMed Central

García-Ramos, Amador; Štirn, Igor; Padial, Paulino; Argüelles-Cienfuegos, Javier; De la Fuente, Blanca; Strojnik, Vojko; Feriche, Belén

2015-01-01

The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s-2). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r2 = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r2 = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key points Vertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer. The relationship between the point at which bar acceleration is less than -9.81 m·s-2 and the real take-off is affected by the velocity of movement. Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance. PMID:25983572

Development and evaluation of fixed dose bi therapy sublingual tablets for treatment stress hypertension and anxiety

PubMed Central

El-Nabarawi, Mohamed A.; Tayel, Saadia A.; Soliman, Nadia A.; Abo Enin, Hadel A.

2013-01-01

Objective: A stress induced rise in the blood pressure. Some believe that patients with hypertension are characterized by a generalized state of increased anxiety. Aim: The purpose of this study is to prepare a fixed dose bi therapy using bisoprolol hemifumarate (BH) as antihypertensive drug and buspirone hydrochloride (BuHCl) as anxiolytic drug, which can be used to treat both diseases concomitantly. Using sublingual tablets is hopeful to improve the BuHCl poor oral bioavailability and to facilitate administration to patients experiencing problems with swallowing. Materials and Methods: A total of 5mg BH and 10mg BuHCl were selected based on compatibility study. A 3×22 full factorial design was adopted for the optimization of the tablets prepared by direct compression method. The effects of the filler type, the binder molecular weight, and the binder type were studied. The prepared formulae were evaluated according to their physical characters as hardness, friability, disintegration time (new modified method and in vivo disintegration time) and wetting properties. In vitro drugs dissolute, permeation through the buccal mucosa and the effect of storage were analyzed by a new valid high pressure liquid chromatography (HPLC) method. Bioavailability study of the selected formula study was carried out and followed by the clinical. Results: The optimized tablet formulation showed accepted average weight, hardness, wetting time, friability, content uniformity, disintegration time (less than 3 min). Maximum drug release could be achieved with in 10 min. In addition enhancing drug permeation through the buccal mucosa and, the maximum concentration of the drug that reached the blood was in the first 10 min which means a rapid onset of action and improved the extent of both drug's absorption. Conclusion: The results revealed that sublingual (F6) tablets containing both drugs would maintain rapid onset of action, and increase bioavailability. BuHCl with BH can be attributed to the marked decline in DBP and SBP. That led to a reduction in the MAP. PMID:24082695

Measuring Avoidance and Inflexibility in Weight Related Problems

ERIC Educational Resources Information Center

Lillis, Jason; Hayes, Steven C.

2008-01-01

There is growing evidence that experiential avoidance and psychological inflexibility plays a role in a variety of clinical presentations, including health problems. The present study presents preliminary data on a new measure of these processes in relation to difficult weight-related thoughts, feelings, and actions: The Acceptance and Action…

Weighting and Aggregation in Composite Indicator Construction: A Multiplicative Optimization Approach

ERIC Educational Resources Information Center

Zhou, P.; Ang, B. W.; Zhou, D. Q.

2010-01-01

Composite indicators (CIs) have increasingly been accepted as a useful tool for benchmarking, performance comparisons, policy analysis and public communication in many different fields. Several recent studies show that as a data aggregation technique in CI construction the weighted product (WP) method has some desirable properties. However, a…

33 CFR 154.2100 - Vapor control system, general.

Code of Federal Regulations, 2014 CFR

2014-07-01

... be constructed to acceptable engineering standards and have the appropriate mechanical strength to... hazards, sources of ignition, and mechanical damage to the maximum practicable extent. Each remaining...

Annoyance caused by propeller airplane flyover noise

NASA Technical Reports Server (NTRS)

Mccurdy, D. A.; Powell, C. A.

1984-01-01

Laboratory experiments were conducted to provide information on quantifying the annoyance response of people to propeller airplane noise. The items of interest were current noise metrics, tone corrections, duration corrections, critical band corrections, and the effects of engine type, operation type, maximum takeoff weight, blade passage frequency, and blade tip speed. In each experiment, 64 subjects judged the annoyance of recordings of propeller and jet airplane operations presented at d-weighted sound pressure levels of 70, 80, and 90 dB in a testing room which simulates the outdoor acoustic environment. The first experiment examined 11 propeller airplanes with maximum takeoff weights greater than or equal to 5700 kg. The second experiment examined 14 propeller airplanes weighting 5700 kg or less. Five jet airplanes were included in each experiment. For both the heavy and light propeller airplanes, perceived noise level and perceived level (Stevens Mark VII procedure) predicted annoyance better than other current noise metrics.

Reconnaissance investigation of water quality, bottom sediment, and biota associated with irrigation drainage in the Lower Rio Grande Valley and Laguna Atascosa National Wildlife Refuge, Texas, 1986-87

USGS Publications Warehouse

Wells, Frank C.; Jackson, Gerry A.; Rogers, William J.

1988-01-01

Toxaphene was detected in 11 fish samples; detectable concentrations ranged from 0.98 to 5.1 micrograms per gram, wet weight. DOT also was detected in 11 fish samples with concentrations ranging from 0.021 to 0.066 micrograms per gram, wet weight. ODD was detected in 21 fish samples; concentrations ranged from 0.015 to 0.16 micrograms per gram, wet weight. DDE was detected in all 22 fish samples, and concentrations ranged from 0.36 to 9.9 micrograms per gram, wet weight. The maximum concentrations of DOT and ODD exceeded the 1980-81 baseline concentrations. The median and maximum concentrations of toxaphene and DDE exceeded the 1980-81 baseline concentrations. The largest concentrations of toxaphene, ODD, and DDE in fish were all measured in samples collected at the Main Floodway near Progreso.

Reliability Based Design for a Raked Wing Tip of an Airframe

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Pai, Shantaram S.; Coroneos, Rula M.

2011-01-01

A reliability-based optimization methodology has been developed to design the raked wing tip of the Boeing 767-400 extended range airliner made of composite and metallic materials. Design is formulated for an accepted level of risk or reliability. The design variables, weight and the constraints became functions of reliability. Uncertainties in the load, strength and the material properties, as well as the design variables, were modeled as random parameters with specified distributions, like normal, Weibull or Gumbel functions. The objective function and constraint, or a failure mode, became derived functions of the risk-level. Solution to the problem produced the optimum design with weight, variables and constraints as a function of the risk-level. Optimum weight versus reliability traced out an inverted-S shaped graph. The center of the graph corresponded to a 50 percent probability of success, or one failure in two samples. Under some assumptions, this design would be quite close to the deterministic optimum solution. The weight increased when reliability exceeded 50 percent, and decreased when the reliability was compromised. A design could be selected depending on the level of risk acceptable to a situation. The optimization process achieved up to a 20-percent reduction in weight over traditional design.

Repeated significance tests of linear combinations of sensitivity and specificity of a diagnostic biomarker

PubMed Central

Wu, Mixia; Shu, Yu; Li, Zhaohai; Liu, Aiyi

2016-01-01

A sequential design is proposed to test whether the accuracy of a binary diagnostic biomarker meets the minimal level of acceptance. The accuracy of a binary diagnostic biomarker is a linear combination of the marker’s sensitivity and specificity. The objective of the sequential method is to minimize the maximum expected sample size under the null hypothesis that the marker’s accuracy is below the minimal level of acceptance. The exact results of two-stage designs based on Youden’s index and efficiency indicate that the maximum expected sample sizes are smaller than the sample sizes of the fixed designs. Exact methods are also developed for estimation, confidence interval and p-value concerning the proposed accuracy index upon termination of the sequential testing. PMID:26947768

Behavioral Weight Loss Treatment in Antipsychotic Treated Youth.

PubMed

Nicol, Ginger E; Kolko, Rachel P; Mills, Monica; Gunnarsdottir, Thrudur; Yingling, Michael D; Schweiger, Julia A; Lenze, Eric J; Newcomer, John W; Wilfley, Denise

2016-05-01

Antipsychotic-treated youth have increased risk for the development of obesity and type 2 diabetes. Behavioral weight loss treatments show promise in reducing obesity and diabetes risk in antipsychotic treated adults, but have received no study in antipsychotic treated youth. We describe a rationale for behavioral weight loss interventions in high-weight antipsychotic treated youth, and report behavioral, anthropomorphic, and metabolic findings from a case series of obese antipsychotic-treated adolescents participating in a short-term, family-based behavioral weight loss intervention. We adapted the Traffic Light Plan, a 16-week family-based weight loss intervention that promotes healthy energy balance using the colors of the traffic light to categorize the nutritional value of foods and intensity of physical activity, adapting a social ecological framework to address health behavior change in multiple social contexts. The intervention was administered to three obese adolescents with long-term antipsychotic medication exposure. Efficacy of the intervention was evaluated with a battery of anthropomorphic and metabolic assessments including weight, body mass index percentile, whole body adiposity, liver fat content, and fasting plasma glucose and lipids. Participants and their parents also filled out a treatment satisfaction questionnaire upon study completion. Two males and 1 female (all aged 14 years) participated. All 3 participants attended all 16 sessions, and experienced beneficial changes in adiposity, fasting lipids and liver fat content associated with weight stabilization or weight loss. Adolescents and their parents all reported a high level of satisfaction with the treatment. Family-based behavioral weight loss treatment can be feasibly delivered and is acceptable to antipsychotic-treated youth and their families. Randomized controlled trials are needed to fully evaluate the effectiveness and acceptability of behavioral weight loss interventions in antipsychotic treated youth and their families.

Inaccuracy of a physical strain trainer for the monitoring of partial weight bearing.

PubMed

Pauser, Johannes; Jendrissek, Andreas; Swoboda, Bernd; Gelse, Kolja; Carl, Hans-Dieter

2011-11-01

To investigate the use of a physical strain trainer for the monitoring of partial weight bearing. Case series with healthy volunteers. Orthopedic clinic. Healthy volunteers (N=10) with no history of foot complaints. Volunteers were taught to limit weight bearing to 10% body weight (BW) and 50% BW, monitored by a physical strain trainer. The parameters peak pressure, maximum force, force-time integral, and pressure-time integral were assessed by dynamic pedobarography when volunteers walked with full BW (condition 1), 50% BW (condition 2), and 10% BW (condition 3). With 10% BW (condition 3), forces with normative gait (condition 1) were statistically significantly reduced under the hindfoot where the physical strain trainer is placed. All pedobarographic parameters were, however, exceeded when the total foot was measured. A limitation to 10% BW with the physical strain trainer (condition 3) was equal to a bisection of peak pressure and maximum force for the total foot with normative gait (condition 1). Halved BW (condition 2) left a remaining mean 82% of peak pressure and mean 59% of maximum force from full BW (condition 1). The concept of controlling partial weight bearing with the hindfoot-addressing device does not represent complete foot loading. Such devices may be preferably applied in cases when the hindfoot in particular must be off-loaded. Other training devices (eg, biofeedback soles) that monitor forces of the total foot have to be used to control partial weight bearing of the lower limb accurately. Copyright © 2011 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Quantifying precision of in situ length and weight measurements of fish

USGS Publications Warehouse

Gutreuter, S.; Krzoska, D.J.

1994-01-01

We estimated and compared errors in field-made (in situ) measurements of lengths and weights of fish. We made three measurements of length and weight on each of 33 common carp Cyprinus carpio, and on each of a total of 34 bluegills Lepomis macrochirus and black crappies Pomoxis nigromaculatus. Maximum total lengths of all fish were measured to the nearest 1 mm on a conventional measuring board. The bluegills and black crappies (85–282 mm maximum total length) were weighed to the nearest 1 g on a 1,000-g spring-loaded scale. The common carp (415–600 mm maximum total length) were weighed to the nearest 0.05 kg on a 20-kg spring-loaded scale. We present a statistical model for comparison of coefficients of variation of length (Cl ) and weight (Cw ). Expected Cl was near zero and constant across mean length, indicating that length can be measured with good precision in the field. Expected Cw decreased with increasing mean length, and was larger than expected Cl by 5.8 to over 100 times for the bluegills and black crappies, and by 3 to over 20 times for the common carp. Unrecognized in situ weighing errors bias the apparent content of unique information in weight, which is the information not explained by either length or measurement error. We recommend procedures to circumvent effects of weighing errors, including elimination of unnecessary weighing from routine monitoring programs. In situ weighing must be conducted with greater care than is common if the content of unique and nontrivial information in weight is to be correctly identified.

Efficacy and acceptability of very low energy diets in overweight and obese people with Type 2 diabetes mellitus: a systematic review with meta-analyses.

PubMed

Rehackova, L; Arnott, B; Araujo-Soares, V; Adamson, A A; Taylor, R; Sniehotta, F F

2016-05-01

To explore the efficacy and acceptability of very low energy diets in overweight or obese adults with Type 2 diabetes. Controlled trials and qualitative studies of individuals with Type 2 diabetes that compared very low energy diets with standard care, minimal interventions, other weight loss interventions, less intensive very low energy diet interventions and very low energy diets with additional components were eligible for inclusion. Meta-analyses of changes in weight, blood glucose levels and attrition rates were performed. Acceptability of very low energy diets was assessed by attrition rates, number and severity of side effects, and by qualitative evaluations of the interventions. Four randomized, five non-randomized controlled trials and no qualitative studies (21 references, 9 studies, 346 participants) were identified. Meta-analyses showed that very low energy diets induced greater weight losses than minimal interventions, standard care or low energy diets at 3 and 6 months. No conclusive evidence for differences in outcomes between very low energy diets and Roux-en-Y gastric bypass surgery was found. Greater differences in energy prescription between intervention and comparator arms were associated with greater differences in weight loss and fasting blood glucose levels at 3 months. Attrition rates did not differ between the very low energy diets and the comparator arms at any measurement point. Very low energy diets are effective in substantial weight loss among people with Type 2 diabetes. Levels of adherence to very low energy diets in controlled studies appear to be high, although details about behaviour support provided are usually poorly described. © 2015 Diabetes UK.

Process Evaluation of the Type 2 Diabetes Mellitus PULSE Program Randomized Controlled Trial: Recruitment, Engagement, and Overall Satisfaction.

PubMed

Aguiar, Elroy J; Morgan, Philip J; Collins, Clare E; Plotnikoff, Ronald C; Young, Myles D; Callister, Robin

2017-07-01

Men are underrepresented in weight loss and type 2 diabetes mellitus (T2DM) prevention studies. To determine the effectiveness of recruitment, and acceptability of the T2DM Prevention Using LifeStyle Education (PULSE) Program-a gender-targeted, self-administered intervention for men. Men (18-65 years, high risk for T2DM) were randomized to intervention ( n = 53) or wait-list control groups ( n = 48). The 6-month PULSE Program intervention focused on weight loss, diet, and exercise for T2DM prevention. A process evaluation questionnaire was administered at 6 months to examine recruitment and selection processes, and acceptability of the intervention's delivery and content. Associations between self-monitoring and selected outcomes were assessed using Spearman's rank correlation. A pragmatic recruitment and online screening process was effective in identifying men at high risk of T2DM (prediabetes prevalence 70%). Men reported the trial was appealing because it targeted weight loss, T2DM prevention, and getting fit, and because it was perceived as "doable" and tailored for men. The intervention was considered acceptable, with men reporting high overall satisfaction (83%) and engagement with the various components. Adherence to self-monitoring was poor, with only 13% meeting requisite criteria. However, significant associations were observed between weekly self-monitoring of weight and change in weight ( r s = -.47, p = .004) and waist circumference ( r s = -.38, p = .026). Men reported they would have preferred more intervention contact, for example, by phone or email. Gender-targeted, self-administered lifestyle interventions are feasible, appealing, and satisfying for men. Future studies should explore the effects of additional non-face-to-face contact on motivation, accountability, self-monitoring adherence, and program efficacy.

19 CFR 146.94 - Records concerning establishment of manufacturing period.

Code of Federal Regulations, 2011 CFR

2011-04-01

... using the FIFO method (see section II of the appendix to this part). (d) Gain or loss. A gain or loss... entered for consumption unless otherwise exempt from duty. (e) Determining gain or loss; acceptable methods—(1) Converting volume to weight. Volume measurements may be converted to weight measurements using...

19 CFR 146.94 - Records concerning establishment of manufacturing period.

Code of Federal Regulations, 2010 CFR

2010-04-01

... using the FIFO method (see section II of the appendix to this part). (d) Gain or loss. A gain or loss... entered for consumption unless otherwise exempt from duty. (e) Determining gain or loss; acceptable methods—(1) Converting volume to weight. Volume measurements may be converted to weight measurements using...

40 CFR 60.493 - Performance test and compliance provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... equivalent or alternative method. The owner or operator shall determine from company records the volume of... estimate the volume of coating used at each facility by using the average dry weight of coating, number of... acceptable to the Administrator. (i) Calculate the volume-weighted average of the total mass of VOC per...

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

Survey of Occupational Noise Exposure in CF Personnel in Selected High-Risk Trades

DTIC Science & Technology

2003-11-01

peak, maximum level , minimum level , average sound level , time weighted average, dose, projected 8-hour dose, and upper limit time were measured for...10 4.4.2 Maximum Sound Level ...11 4.4.3 Minimum Sound Level

Life-time risk of mortality due to different levels of alcohol consumption in seven European countries: implications for low-risk drinking guidelines.

PubMed

Shield, Kevin D; Gmel, Gerrit; Gmel, Gerhard; Mäkelä, Pia; Probst, Charlotte; Room, Robin; Rehm, Jürgen

2017-09-01

Low-risk alcohol drinking guidelines require a scientific basis that extends beyond individual or group judgements of risk. Life-time mortality risks, judged against established thresholds for acceptable risk, may provide such a basis for guidelines. Therefore, the aim of this study was to estimate alcohol mortality risks for seven European countries based on different average daily alcohol consumption amounts. The maximum acceptable voluntary premature mortality risk was determined to be one in 1000, with sensitivity analyses of one in 100. Life-time mortality risks for different alcohol consumption levels were estimated by combining disease-specific relative risk and mortality data for seven European countries with different drinking patterns (Estonia, Finland, Germany, Hungary, Ireland, Italy and Poland). Alcohol consumption data were obtained from the Global Information System on Alcohol and Health, relative risk data from meta-analyses and mortality information from the World Health Organization. The variation in the life-time mortality risk at drinking levels relevant for setting guidelines was less than that observed at high drinking levels. In Europe, the percentage of adults consuming above a risk threshold of one in 1000 ranged from 20.6 to 32.9% for women and from 35.4 to 54.0% for men. Life-time risk of premature mortality under current guideline maximums ranged from 2.5 to 44.8 deaths per 1000 women in Finland and Estonia, respectively, and from 2.9 to 35.8 deaths per 1000 men in Finland and Estonia, respectively. If based upon an acceptable risk of one in 1000, guideline maximums for Europe should be 8-10 g/day for women and 15-20 g/day for men. If low-risk alcohol guidelines were based on an acceptable risk of one in 1000 premature deaths, then maximums for Europe should be 8-10 g/day for women and 15-20 g/day for men, and some of the current European guidelines would require downward revision. © 2017 Society for the Study of Addiction.

Effects of intravesical hydrostatic pressure and volume on the distensibility of the canine prostatic portion of the urethra.

PubMed

Johnston, G R; Feeney, D A; Osborne, C A; Johnston, S D; Smith, F O; Jessen, C R

1985-03-01

Positive-contrast retrograde urethrocystograms were obtained serially on 12 male dogs weighing 11.4 to 23.2 kg before, during, and after the injection of contrast medium until the urinary bladder neck and prostatic and membranous portions of the urethra remained open and distended as viewed by fluoroscopy. Correlations of intravesical volumes and pressures required to achieve maximum distension of the midprostatic portion of the urethra with body weight and surface area were not significant. Because of the variability in intravesical volumes and pressures encountered at maximum distension of the prostatic portion of the urethra, a dose of contrast material expressed relative to body weight or surface area could not be determined for consistently providing maximum distension of the prostatic portion of the urethra.

Biofeedback in Partial Weight Bearing: Usability of Two Different Devices from a Patient’s and Physical Therapist’s Perspective

PubMed Central

van Lieshout, Remko; Pisters, Martijn F.; Vanwanseele, Benedicte; de Bie, Rob A.; Wouters, Eveline J.; Stukstette, Mirelle J.

2016-01-01

Background Partial weight bearing is frequently instructed by physical therapists in patients after lower-limb trauma or surgery. The use of biofeedback devices seems promising to improve the patient’s compliance with weight-bearing instructions. SmartStep and OpenGo-Science are biofeedback devices that provide real-time feedback. For a successful implementation, usability of the devices is a critical aspect and should be tested from a user’s perspective. Aim To describe the usability from the physical therapists’ and a patients’ perspective of Smartstep and OpenGo-Science to provide feedback on partial weight bearing during supervised rehabilitation of patients after lower-limb trauma or surgery. Methods In a convergent mixed-methods design, qualitative and quantitative data were collected. Usability was subdivided into user performance, satisfaction and acceptability. Patients prescribed with partial weight bearing and their physical therapists were asked to use SmartStep and OpenGo-Science during supervised rehabilitation. Usability was qualitatively tested by a think-aloud method and a semi-structured interview and quantitatively tested by the System-Usability-Scale (SUS) and closed questions. For the qualitative data thematic content analyses were used. Results Nine pairs of physical therapists and their patients participated. The mean SUS scores for patients and physical therapists were for SmartStep 70 and 53, and for OpenGo-Science 79 and 81, respectively. Scores were interpreted with the Curved Grading Scale. The qualitative data showed that there were mixed views and perceptions from patients and physical therapists on satisfaction and acceptability. Conclusion This study gives insight in the usability of two biofeedback devices from the patient’s and physical therapist’s perspective. The overall usability from both perspectives seemed to be acceptable for OpenGo-Science. For SmartStep, overall usability seemed only acceptable from the patient’s perspective. Implication The study findings could help clinicians to decide which biofeedback device is appropriate for their given situation and provide information for future development of biofeedback devices. PMID:27798674

Development of a Weight Loss Mobile App Linked With an Accelerometer for Use in the Clinic: Usability, Acceptability, and Early Testing of its Impact on the Patient-Doctor Relationship

PubMed Central

Choo, Seryung; Jung, Se Young; Kim, Sarah; Kim, Jeong Eun; Han, Jong Soo; Kim, Sohye; Kim, Jeong Hyun; Kim, Jeehye; Kim, Yongseok; Kim, Dongouk; Steinhubl, Steve

2016-01-01

Background Although complications of obesity are well acknowledged and managed by clinicians, management of obesity itself is often difficult, which leads to its underdiagnosis and undertreatment in hospital settings. However, tools that could improve the management of obesity, including self-monitoring, engagement with a social network, and open channels of communication between the patient and doctor, are limited in a clinic-based setting. Objective The objective of our study was to evaluate the usability and acceptability of a newly developed mobile app linked with an accelerometer and its early effects on patient-doctor relationships. Methods From September 2013 to February 2014, we developed a mobile app linked with an accelerometer as a supportive tool for a clinic-based weight loss program. The app used information from electronic health records and delivered tailored educational material. Personal goal setting, as well as monitoring of weight changes and physical activity combined with feedback, are key features of the app. We also incorporated an interactive message board for patients and doctors. During the period of March 2014 to May 2014, we tested our mobile app for 1 month in participants in a hospital clinic setting. We assessed the app’s usability and acceptability, as well as the patient-doctor relationship, via questionnaires and analysis of app usage data. Results We recruited 30 individuals (18 male and 12 female) for the study. The median number of log-ins per day was 1.21, with the most frequently requested item being setting goals, followed by track physical activities and view personal health status. Scales of the depth of the patient-doctor relationship decreased from 27.6 (SD 4.8) to 25.1 (SD 4.5) by a Wilcoxon signed rank test (P=.02). Conclusions A mobile phone app linked with an accelerometer for a clinic-based weight loss program is useful and acceptable for weight management but exhibited less favorable early effects on patient-doctor relationships. PMID:27032541

[Fishery and biometrics of genus Calappa crabs (Brachyura: Calappidae) in northeastern Venezuela].

PubMed

Alió, José J; Marcano, Luis A; Altuve, Douglas E

2005-01-01

The box crabs, genus Calappa, are important crab species landed by the industrial trawl fleet in Venezuela. These crabs have a wide distribution in the country, from the Gulf of Venezuela to the Orinoco River, but major landings take place in such gulf, near Margarita Island and northern Sucre State. Average annual landing in the eastern region was 69 t during 1970-2001, with a maximum of 221 t. For this study a sample of 2 398 box crabs was collected by observers on board of industrial trawl vessels, which operated in eastern Venezuela from 1994 to 2000. Three species were found in the landings, Calappa sulcata and C. flammea. each represented 47% of the sample, and C. nitida, which accounted for 5% of the sample. Sex ratio was strongly biased towards males in C. sulcata (2.8:1) and in C. flammnea (1.9:1). while it was only slightly biased in C. nitida (1.4:1). Due to its large size, C. sulcuta is of great commercial interest, with average weight 290 g and a maximum weight of 720 g: C. flammea showed an average weight of 140 g and a maximum weight of 418 g, while C. nitida is the smallest species, with average weight 46 g and maximum weight not beyond 113 g. Box crabs were captured by day and night in similar proportions, and were found in a wide depth range, from a few meters to 126 m deep; however, the largest captures were obtained in the interval 38 - 54 m. Regressions between weight of chelae and total weight were linear, and significantly different between sexes. The relation between total weight and carapace width was allometric, with a power exponent ca. three in C. sulcata, and less than three in C. flamea and C. nitida. Females of C. sulcata and C. nitida showed power exponents significantly smaller than males. Since claws are removed from the animal to be commercialized, while the rest of the animal is returned alive to the sea, for practical purposes a common equation among species and sexes to convert claws weight into total body weight is: total weight - 3 x claws weight. The relationship between catch per unit of effort (CPUE) and effort did not show a significantly decreasing trend, but landings follow the effort trend, with a decreasing tendency in recent years. No mature females were found in any of the three species, thus there could be reproductive migrations towards deeper waters from October to January, when abundance of crabs is lower in the study area. It is recommended that the practice of exploiting only one claw, returning the rest of the animal alive to the sea, should be promoted among fishers, while the removal of claws from female crabs should be avoided.

Effect of increasing truck weight on bridges.

DOT National Transportation Integrated Search

2010-09-01

Legislation has been proposed that will allow a 17,000 lb increase in the maximum gross vehicle : weight on the Interstate Highway System. This projects main goal is quantify the effect of this : increase on the internal forces to which typical sl...

21 CFR 176.300 - Slimicides.

Code of Federal Regulations, 2014 CFR

2014-04-01

...(monobromoacetoxy) ethane [CA Reg. No. 3785-34-0] At a maximum level of 0.10 pound per ton of dry weight fiber. Bis... Methylenebisthiocyanate 2-Nitrobutyl bromoacetate [CA Reg. No. 32815-96-6] At a maximum level of 0.15 pound per ton of dry.... No. 55566-30-8) Maximum use level of 84 mg/kg in the pulp slurry. The additive may also be added to...

Testing students' e-learning via Facebook through Bayesian structural equation modeling.

PubMed

Salarzadeh Jenatabadi, Hashem; Moghavvemi, Sedigheh; Wan Mohamed Radzi, Che Wan Jasimah Bt; Babashamsi, Parastoo; Arashi, Mohammad

2017-01-01

Learning is an intentional activity, with several factors affecting students' intention to use new learning technology. Researchers have investigated technology acceptance in different contexts by developing various theories/models and testing them by a number of means. Although most theories/models developed have been examined through regression or structural equation modeling, Bayesian analysis offers more accurate data analysis results. To address this gap, the unified theory of acceptance and technology use in the context of e-learning via Facebook are re-examined in this study using Bayesian analysis. The data (S1 Data) were collected from 170 students enrolled in a business statistics course at University of Malaya, Malaysia, and tested with the maximum likelihood and Bayesian approaches. The difference between the two methods' results indicates that performance expectancy and hedonic motivation are the strongest factors influencing the intention to use e-learning via Facebook. The Bayesian estimation model exhibited better data fit than the maximum likelihood estimator model. The results of the Bayesian and maximum likelihood estimator approaches are compared and the reasons for the result discrepancy are deliberated.

Research to Support the Determination of Spacecraft Maximum Acceptable Concentrations of Potential Atmospheric Contaminants

NASA Technical Reports Server (NTRS)

Orr, John L.

1997-01-01

In many ways, the typical approach to the handling of bibliographic material for generating review articles and similar manuscripts has changed little since the use of xerographic reproduction has become widespread. The basic approach is to collect reprints of the relevant material and place it in folders or stacks based on its dominant content. As the amount of information available increases with the passage of time, the viability of this mechanical approach to bibliographic management decreases. The personal computer revolution has changed the way we deal with many familiar tasks. For example, word processing on personal computers has supplanted the typewriter for many applications. Similarly, spreadsheets have not only replaced many routine uses of calculators but have also made possible new applications because the cost of calculation is extremely low. Objective The objective of this research was to use personal computer bibliographic software technology to support the determination of spacecraft maximum acceptable concentration (SMAC) values. Specific Aims The specific aims were to produce draft SMAC documents for hydrogen sulfide and tetrachloroethylene taking maximum advantage of the bibliographic software.

Testing students’ e-learning via Facebook through Bayesian structural equation modeling

PubMed Central

Moghavvemi, Sedigheh; Wan Mohamed Radzi, Che Wan Jasimah Bt; Babashamsi, Parastoo; Arashi, Mohammad

2017-01-01

Learning is an intentional activity, with several factors affecting students’ intention to use new learning technology. Researchers have investigated technology acceptance in different contexts by developing various theories/models and testing them by a number of means. Although most theories/models developed have been examined through regression or structural equation modeling, Bayesian analysis offers more accurate data analysis results. To address this gap, the unified theory of acceptance and technology use in the context of e-learning via Facebook are re-examined in this study using Bayesian analysis. The data (S1 Data) were collected from 170 students enrolled in a business statistics course at University of Malaya, Malaysia, and tested with the maximum likelihood and Bayesian approaches. The difference between the two methods’ results indicates that performance expectancy and hedonic motivation are the strongest factors influencing the intention to use e-learning via Facebook. The Bayesian estimation model exhibited better data fit than the maximum likelihood estimator model. The results of the Bayesian and maximum likelihood estimator approaches are compared and the reasons for the result discrepancy are deliberated. PMID:28886019

30 CFR 7.66 - Output energy test.

Code of Federal Regulations, 2011 CFR

2011-07-01

... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Multiple-Shot Blasting Units § 7.66 Output energy... load between 3 ohms and the maximum blasting circuit resistance. (3) One ohm. (b) Acceptable...

30 CFR 7.66 - Output energy test.

Code of Federal Regulations, 2012 CFR

2012-07-01

... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Multiple-Shot Blasting Units § 7.66 Output energy... load between 3 ohms and the maximum blasting circuit resistance. (3) One ohm. (b) Acceptable...

30 CFR 7.66 - Output energy test.

Code of Federal Regulations, 2013 CFR

2013-07-01

... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Multiple-Shot Blasting Units § 7.66 Output energy... load between 3 ohms and the maximum blasting circuit resistance. (3) One ohm. (b) Acceptable...

30 CFR 7.66 - Output energy test.

Code of Federal Regulations, 2014 CFR

2014-07-01

... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Multiple-Shot Blasting Units § 7.66 Output energy... load between 3 ohms and the maximum blasting circuit resistance. (3) One ohm. (b) Acceptable...

30 CFR 7.66 - Output energy test.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Multiple-Shot Blasting Units § 7.66 Output energy... load between 3 ohms and the maximum blasting circuit resistance. (3) One ohm. (b) Acceptable...

NDARC NASA Design and Analysis of Rotorcraft - Input, Appendix 4

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2016-01-01

The NDARC code performs design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance analysis, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. The principal tasks (sizing, mission analysis, flight performance analysis) are shown in the figure as boxes with heavy borders. Heavy arrows show control of subordinate tasks. The aircraft description consists of all the information, input and derived, that denes the aircraft. The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. This information can be the result of the sizing task; can come entirely from input, for a fixed model; or can come from the sizing task in a previous case or previous job. The aircraft description information is available to all tasks and all solutions. The sizing task determines the dimensions, power, and weight of a rotorcraft that can perform a specified set of design conditions and missions. The aircraft size is characterized by parameters such as design gross weight, weight empty, rotor radius, and engine power available. The relations between dimensions, power, and weight generally require an iterative solution. From the design flight conditions and missions, the task can determine the total engine power or the rotor radius (or both power and radius can be fixed), as well as the design gross weight, maximum takeoff weight, drive system torque limit, and fuel tank capacity. For each propulsion group, the engine power or the rotor radius can be sized. Missions are defined for the sizing task, and for the mission performance analysis. A mission consists of a number of mission segments, for which time, distance, and fuel burn are evaluated. For the sizing task, certain missions are designated to be used for design gross weight calculations; for transmission sizing; and for fuel tank sizing. The mission parameters include mission takeoff gross weight and useful load. For specified takeoff fuel weight with adjustable segments, the mission time or distance is adjusted so the fuel required for the mission equals the takeoff fuel weight. The mission iteration is on fuel weight or energy. Flight conditions are specified for the sizing task, and for the flight performance analysis. For the sizing task, certain flight conditions are designated to be used for design gross weight calculations; for transmission sizing; for maximum takeoff weight calculations; and for anti-torque or auxiliary thrust rotor sizing. The flight condition parameters include gross weight and useful load. For flight conditions and mission takeoff, the gross weight can be maximized, such that the power required equals the power available. A flight state is defined for each mission segment and each flight condition. The aircraft performance can be analyzed for the specified state, or a maximum effort performance can be identified. The maximum effort is specified in terms of a quantity such as best endurance or best range, and a variable such as speed, rate of climb, or altitude.

The NACA Impact Basin and Water Landing Tests of a Float Model at Various Velocities and Weights

NASA Technical Reports Server (NTRS)

Batterson, Sidney A

1944-01-01

The first data obtained in the United States under the controlled testing conditions necessary for establishing relationships among the numerous parameters involved when a float having both horizontal and vertical velocity contacts a water surface are presented. The data were obtained at the NACA impact basin. The report is confined to a presentation of the relationship between resultant velocity and impact normal acceleration for various float weights when all other parameters are constant. Analysis of the experimental results indicated that the maximum impact normal acceleration was proportional to the square of the resultant velocity, that increases in float weight resulted in decreases in the maximum impact normal acceleration, and that an increase in the flight-path angle caused increased impact normal acceleration.

Investigation of Food Acceptability and Feeding Practices for Lipid Nutrient Supplements and Blended Flours Used to Treat Moderate Malnutrition

ERIC Educational Resources Information Center

Wang, Richard J.; Trehan, Indi; LaGrone, Lacey N.; Weisz, Ariana J.; Thakwalakwa, Chrissie M.; Maleta, Kenneth M.; Manary, Mark J.

2013-01-01

Objective: To examine acceptability and feeding practices associated with different supplementary food items and identify practices associated with weight gain. Methods: Caregivers (n = 409) whose children had been enrolled in a trial comparing a fortified corn-soy blended flour (CSB++), soy ready-to-use supplementary food (RUSF), and soy/whey…

16 CFR Appendix to Part 460 - Exemptions

Code of Federal Regulations, 2011 CFR

2011-01-01

... relationship between R-value and density or weight per square foot are exempted from the requirements in §§ 460.12(b)(2) and 460.13(c)(1) that they disclose minimum weight per square foot for R-values listed on... sheets of the maximum weight per square foot for each R-value required to be listed. 46 FR 22179 (1981...

16 CFR Appendix to Part 460 - Exemptions

Code of Federal Regulations, 2010 CFR

2010-01-01

... relationship between R-value and density or weight per square foot are exempted from the requirements in §§ 460.12(b)(2) and 460.13(c)(1) that they disclose minimum weight per square foot for R-values listed on... sheets of the maximum weight per square foot for each R-value required to be listed. 46 FR 22179 (1981...

Military Enlistment of Hispanic Youth: Obstacles and Opportunities

DTIC Science & Technology

2008-01-01

17 2.13. Allowable Body Fat Measurements, by Gender and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3.1...exceed the maximum allowed weight are given a body- fat measurement to determine if they exceed the allowable body- fat standards, as shown in Table 2.13...Despite having the most lenient weight standards, the Marine Corps has the most restrictive body- fat requirements. For complete height and weight

The effect of inulin and fructo-oligosaccharide supplementation on the textural, rheological and sensory properties of bread and their role in weight management: a review.

PubMed

Morris, Cécile; Morris, Gordon A

2012-07-15

There is evidence that fructo-oligosaccharides (FOS) and inulin can impart a range of health benefits if consumed on a regular basis. The health benefits include increased mineral absorption and improved immune response and while there is mounting evidence that prebiotics play a role in colorectal cancer prevention, their role of satiety and weight management is still being investigated. In this review we look at the evidence published so far on FOS or inulin supplementation and weight management. We also establish whether prebiotic enriched breads are feasible in terms of dough machinability, bread characteristics and consumers acceptance. Addition of inulin to bread generally resulted in smaller loaves with a harder crumb and darker colour. The limited sensory studies on those products reflect those findings and acceptability decreased with inulin content. However, a fortification of 5% seems achievable. Despite evidence that yeast invertase and dry heat degrade inulin, the extent to which this is the case and whether the prebiotics maintain their activity is not known. There is still a great deal of work to be done to establish whether a bread prepared with enough inulin to retain a significant activity can be manufactured without compromising consumer acceptance. Copyright © 2012 Elsevier Ltd. All rights reserved.

Posterior Shift of Contact Point between Femoral Component and Polyethylene in the LCS Rotating Platform Implant under Weight Bearing Condition.

PubMed

Oh, Won Seok; Lee, Yong Seuk; Kim, Byung Kak; Sim, Jae Ang; Lee, Beom Koo

2016-06-01

To analyze the contact mechanics of the femoral component and polyethylene of the Low Contact Stress rotating platform (LCS-RP) in nonweight bearing and weight bearing conditions using full flexion lateral radiographs. From May 2009 to December 2013, 58 knees in 41 patients diagnosed with osteoarthritis and treated with total knee arthroplasty (TKA) were included in this study. TKA was performed using an LCS-RP knee prosthesis. Full flexion lateral radiographs in both weight bearing and nonweight bearing condition were taken at least one month postoperatively (average, 28.8 months). Translation of femoral component was determined by the contact point between the femoral component and polyethylene. Maximum flexion was measured as the angle between the lines drawn at the midpoint of the femur and tibia. Posterior shift of the contact point in LCS-RP TKA was observed under weight bearing condition, which resulted in deeper flexion compared to LCS-RP TKA under nonweight bearing condition. In the LCS-RP TKA, the contact point between the femoral component and polyethylene moved posteriorly under weight bearing condition, and the joint was more congruent and maximum flexion increased with weight bearing.

Weighted reciprocal of temperature, weighted thermal flux, and their applications in finite-time thermodynamics.

PubMed

Sheng, Shiqi; Tu, Z C

2014-01-01

The concepts of weighted reciprocal of temperature and weighted thermal flux are proposed for a heat engine operating between two heat baths and outputting mechanical work. With the aid of these two concepts, the generalized thermodynamic fluxes and forces can be expressed in a consistent way within the framework of irreversible thermodynamics. Then the efficiency at maximum power output for a heat engine, one of key topics in finite-time thermodynamics, is investigated on the basis of a generic model under the tight-coupling condition. The corresponding results have the same forms as those of low-dissipation heat engines [ M. Esposito, R. Kawai, K. Lindenberg and C. Van den Broeck Phys. Rev. Lett. 105 150603 (2010)]. The mappings from two kinds of typical heat engines, such as the low-dissipation heat engine and the Feynman ratchet, into the present generic model are constructed. The universal efficiency at maximum power output up to the quadratic order is found to be valid for a heat engine coupled symmetrically and tightly with two baths. The concepts of weighted reciprocal of temperature and weighted thermal flux are also transplanted to the optimization of refrigerators.

Can flexibility help you float?

NASA Astrophysics Data System (ADS)

Burton, L. J.; Bush, J. W. M.

2012-10-01

We consider the role of flexibility in the weight-bearing characteristics of bodies floating at an interface. Specifically, we develop a theoretical model for a two-dimensional thin floating plate that yields the maximum stable plate load and optimal stiffness for weight support. Plates small relative to the capillary length are primarily supported by surface tension, and their weight-bearing potential does not benefit from flexibility. Above a critical size comparable to the capillary length, flexibility assists interfacial flotation. For plates on the order of and larger than the capillary length, deflection from an initially flat shape increases the force resulting from hydrostatic pressure, allowing the plate to support a greater load. In this large plate limit, the shape that bears the most weight is a semicircle, which displaces the most fluid above the plate for a fixed plate length. Exact results for maximum weight-bearing plate shapes are compared to analytic approximations made in the limits of large and small plate sizes. The value of flexibility for floating to a number of biological organisms is discussed in light of our study.

Accuracy of maximum likelihood and least-squares estimates in the lidar slope method with noisy data.

PubMed

Eberhard, Wynn L

2017-04-01

The maximum likelihood estimator (MLE) is derived for retrieving the extinction coefficient and zero-range intercept in the lidar slope method in the presence of random and independent Gaussian noise. Least-squares fitting, weighted by the inverse of the noise variance, is equivalent to the MLE. Monte Carlo simulations demonstrate that two traditional least-squares fitting schemes, which use different weights, are less accurate. Alternative fitting schemes that have some positive attributes are introduced and evaluated. The principal factors governing accuracy of all these schemes are elucidated. Applying these schemes to data with Poisson rather than Gaussian noise alters accuracy little, even when the signal-to-noise ratio is low. Methods to estimate optimum weighting factors in actual data are presented. Even when the weighting estimates are coarse, retrieval accuracy declines only modestly. Mathematical tools are described for predicting retrieval accuracy. Least-squares fitting with inverse variance weighting has optimum accuracy for retrieval of parameters from single-wavelength lidar measurements when noise, errors, and uncertainties are Gaussian distributed, or close to optimum when only approximately Gaussian.

A historical analysis of public health, the law, and stigmatized social groups: the need for both obesity and weight bias legislation.

PubMed

Pomeranz, Jennifer L

2008-11-01

History teaches that discrimination against socially undesirable groups leads to societal and governmental neglect of the stigmatized group's health problem. By placing weight discrimination in a historical context, this article demonstrates that legislation specifically aimed at rectifying obesity is less likely while weight bias is socially acceptable. Beyond obesity legislation, public health professionals may consider advocating for legislation directly targeting discrimination based on weight. This article reviews the history of discrimination against distinct groups and provides statutory solutions for discrimination based on weight. In addition to revising current statutes and regulatory rules, a unique statute targeting weight bias in the employment context is considered.

Physical characterization of polyethylene glycols by thermal analytical technique and the effect of humidity and molecular weight.

PubMed

Majumdar, R; Alexander, K S; Riga, A T

2010-05-01

Polyethylene glycols (PEGs) are well known as excipients in tablet dosage formulations. PEGs are generally known to be inert and have very few interactions with other components in the solid dosage forms. However, the physical nature of PEGs and how they affect the disintegration of tablets is not very well understood for the different molecular weights of PEGs. The knowledge of the effect of molecular weight of PEGs on their physical properties and the effect of humidity on the physical properties of PEGs are important parameters for the choice of a PEG to be acceptable as an excipient in pharmaceutical formulations. This study was done to determine the precision of the DSC physical properties for a wide range of PEGs with varying molecular weights from 194 to 23000 daltons. Nine different molecular weights of PEGs were examined in a DSC controlled Heat-Cool-Heat-Cool-Heat (HCHCH) cycle and the observed reproducible values of melting temperature, heat of fusion, crystallization temperature and the heat of crystallization were compared with values obtained from the literature and the observed percent crystallinity was again cross-checked by X-ray Diffraction (XRD) studies. The comparison values indicated acceptable precision. This study was also done to check the effect of humidity on the DSC physical properties for the entire range of PEGs. The results indicated that humidity probably has a higher effect on the physical properties of the low molecular weight PEGs as compared to the high molecular weight PEGs.

14 CFR 27.787 - Cargo and baggage compartments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Personnel and Cargo... for its placarded maximum weight of contents and for the critical load distributions at the... authorized weight of cargo and baggage at the critical loading distribution. (d) If cargo compartment lamps...

21 CFR 177.1520 - Olefin polymers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components... (expressed as percent by weight of the polymer) in N-hexane at specified temperatures Maximum soluble fraction (expressed as percent by weight of polymer) in xylene at specified temperatures 1.1a...

21 CFR 177.1520 - Olefin polymers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components... (expressed as percent by weight of the polymer) in N-hexane at specified temperatures Maximum soluble fraction (expressed as percent by weight of polymer) in xylene at specified temperatures 1.1a...

Validating a Chinese version of the Weight Self-stigma Questionnaire for use with obese adults.

PubMed

Lin, Kuan Pin; Lee, Mei Li

2017-08-01

Although weight-based stigmatization is pervasive in everyday life, a suitable measure of weight self-stigma is currently unavailable for the obese Chinese population. The purpose of this study was to translate and test the psychometric properties of the Weight Self-stigma Questionnaire into Chinese (C-WSSQ) for use with obese Chinese people. A cross-sectional study was conducted on 156 overweight or obese adults. The data were collected from September to December 2015. Data on the body mass index, C-WSSQ, and Multidimensional Body Self-relation Questionnaire were used. The reproducibility and Cronbach a of the C-WSSQ were .892 and .880, respectively, indicating acceptable reliability. The exploratory factor analysis revealed that 2 extracted factors identified to the domain structures of the C-WSSQ, as explained by the 67.05% total variance. The C-WSSQ also demonstrated that the 2-factor model, self-devaluation, and fear of enacted stigma fit the data on the basis of confirmatory factor analysis. Meanwhile, the C-WSSQ was correlated with body mass index and Multidimensional Body Self-relation Questionnaire, indicating an acceptable criterion-related validity. The C-WSSQ shows adequate reliability and validity. The health professionals can use the C-WSSQ to assess weight self-stigma of obese Chinese adults before and after intervention of a weight-loss program. © 2017 John Wiley & Sons Australia, Ltd.

Fracture mechanics technology for optimum pressure vessel design.

NASA Technical Reports Server (NTRS)

Bjeletich, J. G.; Morton, T. M.

1973-01-01

A technique has been developed to design a maximum efficiency reliable pressure vessel of given geometry and service life. The technique for ensuring reliability of the minimum weight vessel relies on the application of linear elastic fracture mechanics and fracture mechanics concepts. The resultant design incorporates potential fatigue and stress corrosion crack extension during service of a worst case initial flaw. Maximum stress for safe life is specified by the design technique, thereby minimizing weight. Ratios of pressure and toughness parameters are employed to avoid arbitrary specification of design stress level which would lead to a suboptimum design.

Better Decomposition Heuristics for the Maximum-Weight Connected Graph Problem Using Betweenness Centrality

NASA Astrophysics Data System (ADS)

Yamamoto, Takanori; Bannai, Hideo; Nagasaki, Masao; Miyano, Satoru

We present new decomposition heuristics for finding the optimal solution for the maximum-weight connected graph problem, which is known to be NP-hard. Previous optimal algorithms for solving the problem decompose the input graph into subgraphs using heuristics based on node degree. We propose new heuristics based on betweenness centrality measures, and show through computational experiments that our new heuristics tend to reduce the number of subgraphs in the decomposition, and therefore could lead to the reduction in computational time for finding the optimal solution. The method is further applied to analysis of biological pathway data.

Lithium D-cell study

NASA Technical Reports Server (NTRS)

Size, P.; Takeuchi, Esther S.

1993-01-01

The purpose of this contract is to evaluate parametrically the effects of various factors including the electrolyte type, electrolyte concentration, depolarizer type, and cell configuration on lithium cell electrical performance and safety. This effort shall allow for the selection and optimization of cell design for future NASA applications while maintaining close ties with WGL's continuous improvements in manufacturing processes and lithium cell design. Taguchi experimental design techniques are employed in this task, and allow for a maximum amount of information to be obtained while requiring significantly less cells than if a full factorial design were employed. Acceptance testing for this task is modeled after the NASA Document EP5-83-025, Revision C, for cell weights, OCV's and load voltages. The performance attributes that are studied in this effort are fresh capacity and start-up characteristics evaluated at two rates and two temperatures, shelf-life characteristics including start-up and capacity retention, and iterative microcalorimetry measurements. Abuse testing includes forced over discharge at two rates with and without diode protection, temperature tolerance testing, and shorting tests at three rates with the measurement of heat generated during shorting conditions.

Concentrations of Cd, Cu, Pb and Zn in soft tissue of oyster (Saccostrea cucullata) collected from the Lengeh Port coast, Persian Gulf, Iran: a comparison with the permissible limits for public health.

PubMed

Heidari, Behnam; Riyahi Bakhtiari, Alireza; Shirneshan, Golshan

2013-12-01

This study examines concentrations of Cd, Cu, Pb and Zn in the soft tissue of Saccostrea cucullata in the intertidal zones of Lengeh Port, Persian Gulf, Iran, to survey whether heavy metals are within the acceptable limits for public health? The results revealed that the average metal concentrations (μg/g dry weight) ranged from 10.28 to 12.03 for Cd, 294.10 to 345.80 for Cu, 20.64 to 58.23 for Pb and 735.60 to 760.40 for Zn in the soft tissue of oysters. From the human public health point of view, comparison between the mean concentrations of the metals in the soft tissue of oyster and global guidelines clearly indicates that nearly in all cases concentrations are higher than the permissible amounts for human consumption. In addition, levels of Zn, Pb and Cu were well below their recommended oral maximum residue level (MRLs), whereas levels of Cd were observed two times higher. Copyright © 2013 Elsevier Ltd. All rights reserved.

Reduction of tablet weight variability by optimizing paddle speed in the forced feeder of a high-speed rotary tablet press.

PubMed

Peeters, Elisabeth; De Beer, Thomas; Vervaet, Chris; Remon, Jean-Paul

2015-04-01

Tableting is a complex process due to the large number of process parameters that can be varied. Knowledge and understanding of the influence of these parameters on the final product quality is of great importance for the industry, allowing economic efficiency and parametric release. The aim of this study was to investigate the influence of paddle speeds and fill depth at different tableting speeds on the weight and weight variability of tablets. Two excipients possessing different flow behavior, microcrystalline cellulose (MCC) and dibasic calcium phosphate dihydrate (DCP), were selected as model powders. Tablets were manufactured via a high-speed rotary tablet press using design of experiments (DoE). During each experiment also the volume of powder in the forced feeder was measured. Analysis of the DoE revealed that paddle speeds are of minor importance for tablet weight but significantly affect volume of powder inside the feeder in case of powders with excellent flowability (DCP). The opposite effect of paddle speed was observed for fairly flowing powders (MCC). Tableting speed played a role in weight and weight variability, whereas changing fill depth exclusively influenced tablet weight. The DoE approach allowed predicting the optimum combination of process parameters leading to minimum tablet weight variability. Monte Carlo simulations allowed assessing the probability to exceed the acceptable response limits if factor settings were varied around their optimum. This multi-dimensional combination and interaction of input variables leading to response criteria with acceptable probability reflected the design space.

Unreported sauna use in anorexia nervosa: evidence from the world-wide-web.

PubMed

Vähäsoini, A; Vazquez, R; Birmingham, C L; Gutierrez, E

2004-03-01

Weight loss methods employed in anorexia nervosa (AN) are vomiting, laxatives, diuretics, enemas, suppositories, ipecac, weight loss medications and inadequate insulin in diabetics. Some methods result in weight loss from fluid depletion and not a reduction in body fat. Sauna use causes rapid fluid loss, but has not been reported in the medical literature as a weight loss strategy used in AN. We found reports of sauna use in AN on the world-wide-web are rare. We hypothesize that the warming caused by the use of sauna, may result in physical improvement in AN and thereby reduce its acceptability as a weight loss strategy.

Leaf position optimization for step-and-shoot IMRT.

PubMed

De Gersem, W; Claus, F; De Wagter, C; Van Duyse, B; De Neve, W

2001-12-01

To describe the theoretical basis, the algorithm, and implementation of a tool that optimizes segment shapes and weights for step-and-shoot intensity-modulated radiation therapy delivered by multileaf collimators. The tool, called SOWAT (Segment Outline and Weight Adapting Tool) is applied to a set of segments, segment weights, and corresponding dose distribution, computed by an external dose computation engine. SOWAT evaluates the effects of changing the position of each collimating leaf of each segment on an objective function, as follows. Changing a leaf position causes a change in the segment-specific dose matrix, which is calculated by a fast dose computation algorithm. A weighted sum of all segment-specific dose matrices provides the dose distribution and allows computation of the value of the objective function. Only leaf position changes that comply with the multileaf collimator constraints are evaluated. Leaf position changes that tend to decrease the value of the objective function are retained. After several possible positions have been evaluated for all collimating leaves of all segments, an external dose engine recomputes the dose distribution, based on the adapted leaf positions and weights. The plan is evaluated. If the plan is accepted, a segment sequencer is used to make the prescription files for the treatment machine. Otherwise, the user can restart SOWAT using the new set of segments, segment weights, and corresponding dose distribution. The implementation was illustrated using two example cases. The first example is a T1N0M0 supraglottic cancer case that was distributed as a multicenter planning exercise by investigators from Rotterdam, The Netherlands. The exercise involved a two-phase plan. Phase 1 involved the delivery of 46 Gy to a concave-shaped planning target volume (PTV) consisting of the primary tumor volume and the elective lymph nodal regions II-IV on both sides of the neck. Phase 2 involved a boost of 24 Gy to the primary tumor region only. SOWAT was applied to the Phase 1 plan. Parotid sparing was a planning goal. The second implementation example is an ethmoid sinus cancer case, planned with the intent of bilateral visus sparing. The median PTV prescription dose was 70 Gy with a maximum dose constraint to the optic pathway structures of 60 Gy. The initial set of segments, segment weights, and corresponding dose distribution were obtained, respectively, by an anatomy-based segmentation tool, a segment weight optimization tool, and a differential scatter-air ratio dose computation algorithm as external dose engine. For the supraglottic case, this resulted in a plan that proved to be comparable to the plans obtained at the other institutes by forward or inverse planning techniques. After using SOWAT, the minimum PTV dose and PTV dose homogeneity increased; the maximum dose to the spinal cord decreased from 38 Gy to 32 Gy. The left parotid mean dose decreased from 22 Gy to 19 Gy and the right parotid mean dose from 20 to 18 Gy. For the ethmoid sinus case, the target homogeneity increased by leaf position optimization, together with a better sparing of the optical tracts. By using SOWAT, the plans improved with respect to all plan evaluation end points. Compliance with the multileaf collimator constraints is guaranteed. The treatment delivery time remains almost unchanged, because no additional segments are created.

Weighted linear regression using D2H and D2 as the independent variables

Treesearch

Hans T. Schreuder; Michael S. Williams

1998-01-01

Several error structures for weighted regression equations used for predicting volume were examined for 2 large data sets of felled and standing loblolly pine trees (Pinus taeda L.). The generally accepted model with variance of error proportional to the value of the covariate squared ( D2H = diameter squared times height or D...

Confirmation in Couples' Communication about Weight Management: An Analysis of How Both Partners Contribute to Individuals' Health Behaviors and Conversational Outcomes

ERIC Educational Resources Information Center

Dailey, Rene M.; Romo, Lynsey Kluever; Thompson, Charee Mooney

2011-01-01

Using confirmation theory, this study investigated how romantic couples' (N = 100) accepting and challenging communication was associated with several weight management (WM) outcomes (i.e., partners' general effectiveness in motivating each other to enact healthy behaviors, productivity of WM conversations, and diet and exercise behaviors).…

The Influence of Stereotypical Beliefs, Participant Gender, and Survivor Weight on Sexual Assault Response

ERIC Educational Resources Information Center

Clarke, Allyson K.; Stermac, Lana

2011-01-01

The present study explored the influence of survivor weight and participant gender, rape myth acceptance, and antifat attitudes on perceptions of sexual assault. Using an online survey tool, a community sample of 413 adult Canadian residents reviewed a hypothetical sexual assault scenario and completed a series of evaluations and attitudinal…

Effect of clothing weight on body weight.

PubMed

Whigham, L D; Schoeller, D A; Johnson, L K; Atkinson, R L

2013-01-01

In clinical settings, it is common to measure weight of clothed patients and estimate a correction for the weight of clothing, but we can find no papers in the medical literature regarding the variability in clothing weight of adults with weather, season and gender. Fifty adults (35 women) were weighed four times during a 12-month period with and without clothing. Clothing weights were determined and regressed against minimum, maximum and average daily outdoor temperature. The average clothing weight (±s.d.) throughout the year was significantly greater in men than in women (1.2±0.3 vs 0.8±0.3 kg, P<0.0001). The average within-person minimum and the average within-person maximum clothing weights across the year were 0.9±0.2 and 1.5±0.4 kg for men, and 0.5±0.2 and 1.1±0.4 kg for women, respectively. The within-person s.d. in clothing weight was 0.3 kg for both men and women. Over the 55 °C range in the lowest to the highest outdoor temperatures, the regressions predicted a maximal change in clothing weight of only 0.4 kg in women and 0.6 kg in men. The clothing weight of men is significantly greater than that of women, but there is little variability throughout the year. Therefore, a clothing adjustment of approximately 0.8 kg for women and 1.2 kg for men is appropriate regardless of outdoor temperature.

Nanosized soy phytosome-based thermogel as topical anti-obesity formulation: an approach for acceptable level of evidence of an effective novel herbal weight loss product

PubMed Central

El-Menshawe, Shahira F; Ali, Adel A; Rabeh, Mohamed A; Khalil, Nermeen M

2018-01-01

Purpose Herbal supplements are currently available as a safer alternative to manage obesity, which has become a rising problem over the recent years. Many chemical drugs on the market are designed to prevent or manage obesity but high cost, low efficacy, and multiple side effects limit its use. Nano lipo-vesicles phytosomal thermogel of Soybean, Glycine max (L.) Merrill, was formulated and evaluated in an attempt to investigate its anti-obesity action on body weight gain, adipose tissue size, and lipid profile data. Methods Three different techniques were used to prepare phytosome formulations including solvent evaporation, cosolvency, and salting out. The optimized phytosome formulation was then selected using Design Expert® (version 7.0.0) depending on the highest entrapment efficiency, minimum particle size (PS), and maximum drug release within 2 hours as responses for further evaluation. The successful phytosome complex formation was investigated by means of Fourier-transform infrared spec troscopy and determination of PS and zeta potential. Phytosome vesicles’ shape was evaluated using transmission electron microscope to ensure its spherical shape. After characterization of the optimized phytosome formulation, it was incorporated into a thermogel formulation. The obtained phytosomal thermogel formulation was evaluated for its clarity, homogeneity, pH, and gel transformation temperature besides rheology behavior and permeation study. An in vivo study was done to investigate the anti-weight-gain effect of soy phytosomal ther mogel. Results EE was found to be >99% for all formulations, PS ranging from 51.66–650.67 while drug release was found to be (77.61–99.78) in range. FTIR and TEM results confirmed the formation of phytosome complex. In vivo study showed a marked reduction in body weight, adipose tissue weight and lipid profile. Conclusion Concisely, soy phytosomal thermogel was found to have a local anti-obesity effect on the abdomen of experimental male albino rats with a slight systemic effect on the lipid profile data. PMID:29391791

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149... control and the airspeed indicator has features such as low speed awareness that provide ample warning...

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149... control and the airspeed indicator has features such as low speed awareness that provide ample warning...

Research on Volume Measurement System of Weights with Hydrostatic Technique

NASA Astrophysics Data System (ADS)

Wang, Jian; Ren, Xiaoping; Yao, Hong; Cai, Changqing; Zhang, Yue; Zhong, Ruilin; Ding, Jing'an

According to Annex B.7.4 of OIML R111-1, equipment for measuring volume of weights mass ranging from 1 kg to 20 kg including three methods of hydrostatic comparison is described. The equipment consists of a robot arm for transferring weights, a liquid bath, a mass comparator with 26.1 kg of maximum capacity and 1 mg of readability, glass housing, two weight exchangers including in air and in liquid, two weight holders including in air and in liquid, and a controller. The equipment will enable to perform automatically volume measurements.

A randomized controlled trial to determine the efficacy of a high carbohydrate and high protein ready-to-eat food product for weight loss.

PubMed

Fuller, N R; Fong, M; Gerofi, J; Leung, L; Leung, C; Denyer, G; Caterson, I D

2016-04-01

Incorporating meal replacements has been shown to produce a significantly greater weight loss than a conventional reduced calorie diet. Ready-to-eat conventional foods may also be effective in this role and provide additional benefit because of their palatability, acceptance and enjoyment and thus increase dietary compliance. This trial investigated the efficacy of a ready-to-eat food product (Vita-Weat biscuit) that is both high in carbohydrate and high in protein as part of a diet prescription for weight loss in an overweight and obese population group. A total of 76 participants were randomized to a 6-week weight loss intervention including the ready-to-eat food product (intervention group) or advice on the 'Australian Guide to Healthy Eating' (control group). Both groups lost approximately 2 kg weight which equated to a reduction in body mass index of 0.70 kg m(-2) . There was no significant difference in percentage weight loss from screening to 6 weeks between the two groups; mean difference for the intervention vs. -0.20% (95% confidence interval: -0.96, 1.36); P = 0.73. Both diets were nutritionally matched and well-accepted over the 6-week period. This study shows that the inclusion of a ready-to-eat food product can be included as part of a dietary programme to achieve a clinically significant weight loss over a short period. This may have benefit when incorporated into an individual's meal plan intermittently to assist weight control. It also provides support for current public health nutritional guidelines as the participants in this study following such advice were also successful in achieving a clinically meaningful weight loss. © 2016 World Obesity.

Weight loss expectations and body dissatisfaction in young women attempting to lose weight.

PubMed

Siervo, M; Montagnese, C; Muscariello, E; Evans, E; Stephan, B C M; Nasti, G; Papa, A; Iannetti, E; Colantuoni, A

2014-04-01

Unrealistic weight loss expectations (WLEs) and greater body dissatisfaction may be associated with the poor long-term outcomes of dietary and lifestyle weight loss treatments. We evaluated the association between body size, WLEs and body dissatisfaction in young women attempting to lose weight. Forty-four young healthy women [age range 18-35 years, body mass index (BMI) range 23-40 kg/m2] were recruited. Women were classified as obese (BMI ≥ 30.0 kg/m2) and non-obese (BMI <30.0 kg/m2). The Body Dissatisfaction scale of the Eating Disorder Inventory-2 and the Body Image Assessment for Obesity silhouette charts were used to assess body dissatisfaction. WLEs were categorised according to personal (ideal, happiness, satisfaction, weight history), lifestyle (fitness) and social (career, family acceptance, peer acceptance, mass media, social pressure) factors. Individual WLEs were compared with recommended clinical targets (5%, 10% and 20%) for weight loss. Body dissatisfaction was lower in non-obese subjects and was directly associated with BMI (P < 0.05). WLEs were directly associated with BMI and the obese group reported greater expectations. Five non-obese subjects (23%) desired to lose more than 20% of their body weight, whereas the proportion was significantly higher in the obese group (17 subjects; 74%). Subjects derived the greatest WLEs from mass media, whereas they perceived that family and friends were supportive of a lesser degree of weight loss. We observed a mismatch between clinical and personal expectations, and social pressure and interpersonal relationships appear to have a prominent role with respect to influencing the association. © 2013 The Authors Journal of Human Nutrition and Dietetics © 2013 The British Dietetic Association Ltd.

Haptic biofeedback for improving compliance with lower-extremity partial weight bearing.

PubMed

Fu, Michael C; DeLuke, Levi; Buerba, Rafael A; Fan, Richard E; Zheng, Ying Jean; Leslie, Michael P; Baumgaertner, Michael R; Grauer, Jonathan N

2014-11-01

After lower-extremity orthopedic trauma and surgery, patients are often advised to restrict weight bearing on the affected limb. Conventional training methods are not effective at enabling patients to comply with recommendations for partial weight bearing. The current study assessed a novel method of using real-time haptic (vibratory/vibrotactile) biofeedback to improve compliance with instructions for partial weight bearing. Thirty healthy, asymptomatic participants were randomized into 1 of 3 groups: verbal instruction, bathroom scale training, and haptic biofeedback. Participants were instructed to restrict lower-extremity weight bearing in a walking boot with crutches to 25 lb, with an acceptable range of 15 to 35 lb. A custom weight bearing sensor and biofeedback system was attached to all participants, but only those in the haptic biofeedback group were given a vibrotactile signal if they exceeded the acceptable range. Weight bearing in all groups was measured with a separate validated commercial system. The verbal instruction group bore an average of 60.3±30.5 lb (mean±standard deviation). The bathroom scale group averaged 43.8±17.2 lb, whereas the haptic biofeedback group averaged 22.4±9.1 lb (P<.05). As a percentage of body weight, the verbal instruction group averaged 40.2±19.3%, the bathroom scale group averaged 32.5±16.9%, and the haptic biofeedback group averaged 14.5±6.3% (P<.05). In this initial evaluation of the use of haptic biofeedback to improve compliance with lower-extremity partial weight bearing, haptic biofeedback was superior to conventional physical therapy methods. Further studies in patients with clinical orthopedic trauma are warranted. Copyright 2014, SLACK Incorporated.

Dynamic pushing on three frictional surfaces: maximum acceptable forces, cardiopulmonary and calf muscle metabolic responses in healthy men.

PubMed

Maikala, Rammohan V; Dempsey, Patrick G; Ciriello, Vincent M; O'Brien, Niall V

2009-06-01

Pushing is an important materials handling activity in many occupations; however, pushing-related physiological investigations are still in infancy. The purpose was to evaluate maximum acceptable forces and physiological responses while pushing on: treadmill (TREAD); plywood floor (PLY); and Teflon floor (TEF). Acceptable forces, cardiopulmonary and calf muscle oxygenation and blood volume responses were collected simultaneously while 12 men (age 39 +/- 13 years; height 178 +/- 6 cm; and body mass 91.5 +/- 16 kg) pushed for 2 h on each surface at their psychophysical workload. Participants selected higher forces on the PLY, resulting in higher pulmonary oxygen uptake compared to that of TEF (by approximately 9%) and TREAD (by approximately 18%). Pushing on the TEF demonstrated 50-56% lower blood volume changes and 1.5-1.8 times more oxygenation-force ratio than that for other surfaces. It is concluded that, to avoid a potential slip, participants were conservative in selecting acceptable forces to push on the slippery TEF. Part of this compensatory strategy on the TEF resulted in less muscle activity and, therefore, less demand for oxygen delivery to the calf muscle than for other surfaces. The present findings of significant force- and physiological-related differences in treadmill vs. high inertia pushcart clearly demonstrate that pushing experiments are essential to evaluate functional abilities of the workers.

Optimization of vehicle weight for Mars excursion missions

NASA Technical Reports Server (NTRS)

Ferebee, Melvin J., Jr.

1991-01-01

The excursion class mission to Mars is defined as a mission with one year durations coupled with a stay time of up to 30 days. The fuel budget for such a mission is investigated. The overall figure of merit in such an assessment is the vehicle weight ratio, the ratio between the wet vehicle weight to the dry vehicle weight. It is necessary to minimize the overall fuel budget for the mission in order to maximize the benefits that could be obtained by sending humans to Mars. Assumptions used in the analysis are: each mission will depart and terminate in low-earth-orbit (LEO) (500 km circular) and the maximum stay time at Mars is 30 days. The maximum mission duration is one year (355-375 days). The mass returned to LEO is 135,000 kg, the dropoff mass left at Mars is 168,000 kg. Three propulsive techniques for atmospheric interface are investigated: aerobraking, all-chemical propulsion, and nuclear thermal propulsion. By defining the fuel requirements, the space transfer vehicle's configuration is defined.

A pilot study comparing two weight loss maintenance interventions among low-income, mid-life women.

PubMed

Samuel-Hodge, Carmen D; Johnston, Larry F; Gizlice, Ziya; Garcia, Beverly A; Lindsley, Sara C; Gold, Alison D; Braxton, Danielle F; Keyserling, Thomas C

2013-07-15

Despite high obesity prevalence rates, few low-income midlife women participate in weight loss maintenance trials. This pilot study aims to assess the effectiveness of two weight loss maintenance interventions in this under-represented population. Low-income midlife women who completed a 16-week weight loss intervention and lost  ≥ 8 lbs (3.6 kg) were eligible to enroll in one of two 12-month maintenance programs. The programs were similar in content and had the same number of total contacts, but were different in the contact modality (Phone + Face-to-Face vs. Face-to-Face Only). Two criteria were used to assess successful weight loss maintenance at 12 months: (1) retaining a loss of  ≥ 5% of body weight from the start of the weight loss phase and (2) a change in body weight of  < 3%, from the start to the end of the maintenance program. Outcome measures of changes in physiologic and psychosocial factors, and evaluations of process measures and program acceptability (measured at 12 months) are also reported. For categorical variables, likelihood ratio or Fisher's Exact (for small samples) tests were used to evaluate statistically significant relationships; for continuous variables, t-tests or their equivalents were used to assess differences between means and also to identify correlates of weight loss maintenance. Overall, during the 12-month maintenance period, 41% (24/58) of participants maintained a loss of  ≥ 5% of initial weight and 43% (25/58) had a <3% change in weight. None of the comparisons between the two maintenance programs were statistically significant. However, improvements in blood pressure and dietary behaviors remained significant at the end of the 12-month maintenance period for participants in both programs. Participant attendance and acceptability were high for both programs. The effectiveness of two pilot 12-month maintenance interventions provides support for further research in weight loss maintenance among high-risk, low-income women. ClinicalTrials.gov Identifier: NCT00288301.

Which factors influence patients' maximum acceptable waiting time for cataract surgery? - a questionnaire survey.

PubMed

Weingessel, Birgit; Richter-Mueksch, Sibylla; Vécsei-Marlovits, Pia V

2011-05-01

To evaluate patients’ maximum acceptable waiting time (MAWT) and to assess the determinants of patient perceptions of MAWT. A total of 500 consecutive patients with cataract were asked to fill out a preoperative questionnaire, addressing patients’ MAWT to undergo cataract surgery. Patients’ visual impairment (VF-14 score), education, profession and social status were evaluated, and an ophthalmologic examination was performed. Univariate analysis included Spearman’s correlation test, unpaired Student’s t-test and the Mann–Whitney U test. Univariate and multivariate associations were calculated using unconditional logistic regression. The mean MAWT was 3.17 ± 2.12 months. The mean VF-14 score was 72.10 ± 22.54. Between VF-14 score and MAWT, there was a significant correlation (r = 0.180, p = 0.004). Patients with higher education (high school, university) accepted significantly longer MAWT (3.92 ± 2.38 months versus 3.02 ± 2.00 months, p = 0.009). Patients who had self-noticed visual impairment were nearly four times (OR: 3.88, 95% CI = 2.07–7.28, p < 0.001) more likely to accept only MAWT of <3 months. Patients with low tolerance for waiting had greater self-reported difficulty with vision. Patients’ acceptance of waiting was not associated with clinical visual acuity measures. Education, ability to work, living independently and taking care of dependents were also strong predictors from patients’ perspective. Considering the implementation of standards for waiting lists, these facts should be taken into account. © 2010 The Authors. Journal compilation © 2010 Acta Ophthalmol.

21 CFR 801.415 - Maximum acceptable level of ozone.

Code of Federal Regulations, 2014 CFR

2014-04-01

... physiological effects on the central nervous system, heart, and vision have been reported, the predominant... permanent or part of any system, which generates ozone by design or as an inadvertent or incidental product...

21 CFR 801.415 - Maximum acceptable level of ozone.

Code of Federal Regulations, 2011 CFR

2011-04-01

... physiological effects on the central nervous system, heart, and vision have been reported, the predominant... permanent or part of any system, which generates ozone by design or as an inadvertent or incidental product...

21 CFR 801.415 - Maximum acceptable level of ozone.

Code of Federal Regulations, 2010 CFR

2010-04-01

... physiological effects on the central nervous system, heart, and vision have been reported, the predominant... permanent or part of any system, which generates ozone by design or as an inadvertent or incidental product...

21 CFR 801.415 - Maximum acceptable level of ozone.

Code of Federal Regulations, 2013 CFR

2013-04-01

... physiological effects on the central nervous system, heart, and vision have been reported, the predominant... permanent or part of any system, which generates ozone by design or as an inadvertent or incidental product...

21 CFR 801.415 - Maximum acceptable level of ozone.

Code of Federal Regulations, 2012 CFR

2012-04-01

... physiological effects on the central nervous system, heart, and vision have been reported, the predominant... permanent or part of any system, which generates ozone by design or as an inadvertent or incidental product...

Specialist health visitor-led weight management intervention in primary care: exploratory evaluation.

PubMed

Jackson, Cath; Coe, Anne; Cheater, Francine M; Wroe, Stephen

2007-04-01

This paper is a report of an exploratory study to evaluate the effectiveness and acceptability of a specialist health visitor-led weight management clinic in primary care. Tackling obesity is a global health priority. Whilst there is evidence to support a role for primary healthcare professionals in its management, provision in England varies widely. Using designated 'obesity specialists' is an approach warranting further investigation. In 2003-2004, patients with a body mass index of 30 or more received a specialist health visitor-led intervention based on the Jan Felgens 'I2E2' model. Clinical outcome data and self-reported dietary consumption data were collected at weeks 1, 13, 27 and 52. Quantitative and qualitative data on patient acceptability of the clinic were collected at week 26. Eighty-nine patients attended the clinic. Mean body weight and body mass index and systolic and diastolic blood pressure decreased over time by statistically significant amounts. There was a non-significant decrease in fasting blood sugar over time, but approximately one in 10 patients with undiagnosed diabetes were identified. No statistically significant change was evident for cholesterol levels. Mean self-reported weekly consumption of cakes, desserts and snacks decreased and that of fruit and vegetables increased, each by statistically significant amounts. Participants found the clinic highly acceptable and identified the specialist health visitor as fundamental to its success. A partnership approach to weight management through which patients are empowered to make sustainable lifestyle changes now needs to be tested in a multi-centre randomized controlled trial.

Persistence and risk assessment of emamectin benzoate residues on okra fruits and soil.

PubMed

Jyot, Gagan; Mandal, Kousik; Chahil, G S; Singh, Balwinder

2014-08-01

Emamectin benzoate, a synthetic derivative of abamectin, is found effective against fruit borer and jassid in okra crops. The present studies were carried out to study the dissipation pattern of emamectin benzoate on okra and to suggest a suitable waiting period for the safety of consumers. Following three applications of emamectin benzoate (Proclaim 5 SG) at 68.1 and 136.2 g a.i. ha-1, the average initial deposits of emamectin benzoate were observed to be 0.22 and 0.42mg kg-1, respectively. These residues dissipated below the limit of quantification (LOQ) of 0.05 mg kg-1 after 5 days at both the dosages. Soil samples collected after 15 days did not reveal the presence of emamectin benzoate at LOQ of 0.05 mg kg-1. Acceptable daily intake (ADI) of emamectin benzoate is 0.0005 mg kg-1 body weight day-1, which means an adult of 55 kg weight can safely tolerate an intake of 27.50 microg emamectin benzoate. Assuming an average consumption of 80 g okra fruit and multiplying it by average and maximum residues observed on 0 day at recommended dosage, the intake of emamectin benzoate comes out to be about 20 Itg and these values are quite safe in comparison to its ADI. These studies, therefore, suggest that the use of emamectin benzoate at the minimum effective dosages do not seem to pose any hazards to the consumers if a waiting period of 1 day is observed.

Using machine learning to assess covariate balance in matching studies.

PubMed

Linden, Ariel; Yarnold, Paul R

2016-12-01

In order to assess the effectiveness of matching approaches in observational studies, investigators typically present summary statistics for each observed pre-intervention covariate, with the objective of showing that matching reduces the difference in means (or proportions) between groups to as close to zero as possible. In this paper, we introduce a new approach to distinguish between study groups based on their distributions of the covariates using a machine-learning algorithm called optimal discriminant analysis (ODA). Assessing covariate balance using ODA as compared with the conventional method has several key advantages: the ability to ascertain how individuals self-select based on optimal (maximum-accuracy) cut-points on the covariates; the application to any variable metric and number of groups; its insensitivity to skewed data or outliers; and the use of accuracy measures that can be widely applied to all analyses. Moreover, ODA accepts analytic weights, thereby extending the assessment of covariate balance to any study design where weights are used for covariate adjustment. By comparing the two approaches using empirical data, we are able to demonstrate that using measures of classification accuracy as balance diagnostics produces highly consistent results to those obtained via the conventional approach (in our matched-pairs example, ODA revealed a weak statistically significant relationship not detected by the conventional approach). Thus, investigators should consider ODA as a robust complement, or perhaps alternative, to the conventional approach for assessing covariate balance in matching studies. © 2016 John Wiley & Sons, Ltd.

COMPARISON OF THE PRODUCED AND PERCEIVED VOICE RANGE PROFILES IN UNTRAINED AND TRAINED CLASSICAL SINGERS

PubMed Central

Hunter, Eric J.; Švec, Jan G.; Titze, Ingo R.

2016-01-01

Frequency and intensity ranges (in true dB SPL re 20 μPa at 1 meter) of voice production in trained and untrained vocalists were compared to the perceived dynamic range (phons) and units of loudness (sones) of the ear. Results were reported in terms of standard Voice Range Profiles (VRPs), perceived VRPs (as predicted by accepted measures of auditory sensitivities), and a new metric labeled as an Overall Perceptual Level Construct. Trained classical singers made use of the most sensitive part of the hearing range (around 3–4 KHz) through the use of the singer’s formant. When mapped onto the contours of equal-loudness (depicting non-uniform spectral and dynamic sensitivities of the auditory system), the formant is perceived at an even higher sound level, as measured in phons, than a flat or A-weighted spectrum would indicate. The contributions of effects like the singer’s formant and the sensitivities of the auditory system helped the trained singers produce 20–40 percent more units of loudness, as measured in sones, than the untrained singers. Trained male vocalists had a maximum Overall Perceptual Level Construct that was 40% higher than the untrained male vocalists. While the A-weighted spectrum (commonly used in VRP measurement) is a reasonable first order approximation of auditory sensitivities, it misrepresents the most salient part of the sensitivities (where the singer’s formant is found) by nearly 10 dB. PMID:16325373

49 CFR 529.5 - Requirements for intermediate manufacturers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... automobile cause it to exceed the maximum curb weight or maximum frontal area set forth in the document furnished it by the incomplete automobile manufacturer under § 529.4(c)(1) or by a previous intermediate...

49 CFR 529.5 - Requirements for intermediate manufacturers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... automobile cause it to exceed the maximum curb weight or maximum frontal area set forth in the document furnished it by the incomplete automobile manufacturer under § 529.4(c)(1) or by a previous intermediate...

49 CFR 529.5 - Requirements for intermediate manufacturers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... automobile cause it to exceed the maximum curb weight or maximum frontal area set forth in the document furnished it by the incomplete automobile manufacturer under § 529.4(c)(1) or by a previous intermediate...

49 CFR 529.5 - Requirements for intermediate manufacturers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... automobile cause it to exceed the maximum curb weight or maximum frontal area set forth in the document furnished it by the incomplete automobile manufacturer under § 529.4(c)(1) or by a previous intermediate...

49 CFR 529.5 - Requirements for intermediate manufacturers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... automobile cause it to exceed the maximum curb weight or maximum frontal area set forth in the document furnished it by the incomplete automobile manufacturer under § 529.4(c)(1) or by a previous intermediate...

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149(b). [Amdt. 23-7, 34 FR 13097... lighted area such as the landing gear control and the airspeed indicator has features such as low speed...

A Comparison of Item Selection Techniques for Testlets

ERIC Educational Resources Information Center

Murphy, Daniel L.; Dodd, Barbara G.; Vaughn, Brandon K.

2010-01-01

This study examined the performance of the maximum Fisher's information, the maximum posterior weighted information, and the minimum expected posterior variance methods for selecting items in a computerized adaptive testing system when the items were grouped in testlets. A simulation study compared the efficiency of ability estimation among the…

Combined inoculation of Pseudomonas fluorescens and Trichoderma harzianum for enhancing plant growth of vanilla (Vanilla planifolia).

PubMed

Sandheep, A R; Asok, A K; Jisha, M S

2013-06-15

This study was conducted to evaluate the plant growth promoting efficiency of combined inoculation of rhizobacteria on Vanilla plants. Based on the in vitro performance of indigenous Trichoderma spp. and Pseudomonas spp., four effective antagonists were selected and screened under greenhouse experiment for their growth enhancement potential. The maximum percentage of growth enhancement were observed in the combination of Trichoderma harzianum with Pseudomonas fluorescens treatment followed by Pseudomonas fluorescens, Trichoderma harzianum, Pseudomonas putida and Trichoderma virens, respectively in decreasing order. Combined inoculation of Trichoderma harzianum and Pseudomonas fluorescens registered the maximum length of vine (82.88 cm), highest number of leaves (26.67/plant), recorded the highest fresh weight of shoots (61.54 g plant(-1)), fresh weight of roots (4.46 g plant(-1)) and dry weight of shoot (4.56 g plant(-1)) where as the highest dry weight of roots (2.0806 g plant(-1)) were achieved with treatments of Pseudomonas fluorescens. Among the inoculated strains, combined inoculation of Trichoderma harzianum and Pseudomonas fluorescens recorded the maximum nitrogen uptake (61.28 mg plant(-1)) followed by the combined inoculation of Trichoderma harzianum (std) and Pseudomonas fluorescens (std) (55.03 mg plant(-1)) and the highest phosphorus uptake (38.80 mg plant(-1)) was recorded in dual inoculation of Trichoderma harzianum and Pseudomonas fluorescens.

Treatment planning, optimization, and beam delivery technqiues for intensity modulated proton therapy

NASA Astrophysics Data System (ADS)

Sengbusch, Evan R.

Physical properties of proton interactions in matter give them a theoretical advantage over photons in radiation therapy for cancer treatment, but they are seldom used relative to photons. The primary barriers to wider acceptance of proton therapy are the technical feasibility, size, and price of proton therapy systems. Several aspects of the proton therapy landscape are investigated, and new techniques for treatment planning, optimization, and beam delivery are presented. The results of these investigations suggest a means by which proton therapy can be delivered more efficiently, effectively, and to a much larger proportion of eligible patients. An analysis of the existing proton therapy market was performed. Personal interviews with over 30 radiation oncology leaders were conducted with regard to the current and future use of proton therapy. In addition, global proton therapy market projections are presented. The results of these investigations serve as motivation and guidance for the subsequent development of treatment system designs and treatment planning, optimization, and beam delivery methods. A major factor impacting the size and cost of proton treatment systems is the maximum energy of the accelerator. Historically, 250 MeV has been the accepted value, but there is minimal quantitative evidence in the literature that supports this standard. A retrospective study of 100 patients is presented that quantifies the maximum proton kinetic energy requirements for cancer treatment, and the impact of those results with regard to treatment system size, cost, and neutron production is discussed. This study is subsequently expanded to include 100 cranial stereotactic radiosurgery (SRS) patients, and the results are discussed in the context of a proposed dedicated proton SRS treatment system. Finally, novel proton therapy optimization and delivery techniques are presented. Algorithms are developed that optimize treatment plans over beam angle, spot size, spot spacing, beamlet weight, the number of delivered beamlets, and the number of delivery angles. These methods are evaluated via treatment planning studies including left-sided whole breast irradiation, lung stereotactic body radiotherapy, nasopharyngeal carcinoma, and whole brain radiotherapy with hippocampal avoidance. Improvements in efficiency and efficacy relative to traditional proton therapy and intensity modulated photon radiation therapy are discussed.

SU-E-T-399: Evaluation of Selection Criteria for Computational Human Phantoms for Use in Out-Of-Field Organ Dosimetry for Radiotherapy Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pelletier, C; Jung, J; Lee, C

2015-06-15

Purpose: To quantify the dosimetric uncertainty due to organ position errors when using height and weight as phantom selection criteria in the UF/NCI Hybrid Phantom Library for the purpose of out-of-field organ dose reconstruction. Methods: Four diagnostic patient CT images were used to create 7-field IMRT plans. For each patient, dose to the liver, right lung, and left lung were calculated using the XVMC Monte Carlo code. These doses were taken to be the ground truth. For each patient, the phantom with the most closely matching height and weight was selected from the body size dependent phantom library. The patientmore » plans were then transferred to the computational phantoms and organ doses were recalculated. Each plan was also run on 4 additional phantoms with reference heights and or weights. Maximum and mean doses for the three organs were computed, and the DVHs were extracted and compared. One sample t-tests were performed to compare the accuracy of the height and weight matched phantoms against the additional phantoms in regards to both maximum and mean dose. Results: For one of the patients, the height and weight matched phantom yielded the most accurate results across all three organs for both maximum and mean doses. For two additional patients, the matched phantom yielded the best match for one organ only. In 13 of the 24 cases, the matched phantom yielded better results than the average of the other four phantoms, though the results were only statistically significant at the .05 level for three cases. Conclusion: Using height and weight matched phantoms does yield better results in regards to out-of-field dosimetry than using average phantoms. Height and weight appear to be moderately good selection criteria, though this selection criteria failed to yield any better results for one patient.« less

41 CFR 302-7.17 - Is the maximum weight allowance for HHG and temporary storage limited when quarters are furnished...

Code of Federal Regulations, 2012 CFR

2012-07-01

... and temporary storage that can be transported to that location. Only the authorized weight allowance that was shipped to the OCONUS location may be returned to CONUS upon completion of the tour of duty...

41 CFR 302-7.16 - Is the maximum weight allowance for HHG and temporary storage limited when quarters are furnished...

Code of Federal Regulations, 2011 CFR

2011-07-01

... and temporary storage that can be transported to that location. Only the authorized weight allowance that was shipped to the OCONUS location may be returned to CONUS upon completion of the tour of duty...

41 CFR 302-7.17 - Is the maximum weight allowance for HHG and temporary storage limited when quarters are furnished...

Code of Federal Regulations, 2013 CFR

2013-07-01

... and temporary storage that can be transported to that location. Only the authorized weight allowance that was shipped to the OCONUS location may be returned to CONUS upon completion of the tour of duty...

High speed galloping in the cheetah (Acinonyx jubatus) and the racing greyhound (Canis familiaris): spatio-temporal and kinetic characteristics.

PubMed

Hudson, Penny E; Corr, Sandra A; Wilson, Alan M

2012-07-15

The cheetah and racing greyhound are of a similar size and gross morphology and yet the cheetah is able to achieve a far higher top speed. We compared the kinematics and kinetics of galloping in the cheetah and greyhound to investigate how the cheetah can attain such remarkable maximum speeds. This also presented an opportunity to investigate some of the potential limits to maximum running speed in quadrupeds, which remain poorly understood. By combining force plate and high speed video data of galloping cheetahs and greyhounds, we show how the cheetah uses a lower stride frequency/longer stride length than the greyhound at any given speed. In some trials, the cheetahs used swing times as low as those of the greyhounds (0.2 s) so the cheetah has scope to use higher stride frequencies (up to 4.0 Hz), which may contribute to it having a higher top speed that the greyhound. Weight distribution between the animal's limbs varied with increasing speed. At high speed, the hindlimbs support the majority of the animal's body weight, with the cheetah supporting 70% of its body weight on its hindlimbs at 18 m s(-1); however, the greyhound hindlimbs support just 62% of its body weight. Supporting a greater proportion of body weight on a particular limb is likely to reduce the risk of slipping during propulsive efforts. Our results demonstrate several features of galloping and highlight differences between the cheetah and greyhound that may account for the cheetah's faster maximum speeds.

Design of a Slowed-Rotor Compound Helicopter for Future Joint Service Missions

DTIC Science & Technology

2010-01-01

achieves a 208kt top speed at engine MCP and 11,000ft/ISA while having 216hp/ton installed power, based on engine MRP and MTOW. Figure 33...Intermediate rated power ISA International Standard Atmosphere MCP Maximum continuous power MRP Maximum rated power MTOW Maximum Takeoff Weight NDARC...NASA Design and Analysis of Rotorcraft SFC Specific fuel consumption SRC Slowed-Rotor Compound Symbols σ Rotor solidity (geometric) CD Drag

7 CFR Appendix A to Part 220 - Alternate Foods for Meals

Code of Federal Regulations, 2010 CFR

2010-01-01

.... Manufacturers seeking acceptance of their product shall furnish FNS a chemical analysis, protein efficiency... shall retain the “raw” laboratory data for a period of one year. Such information shall be made... Weight Ounce 2 4.0 PER Casein=2.5 2.0 Moisture Percent weight 40.0 Fat 2 ......do 22.0 Fiber ......do 0.8...

Least-Squares Analysis of Data with Uncertainty in "y" and "x": Algorithms in Excel and KaleidaGraph

ERIC Educational Resources Information Center

Tellinghuisen, Joel

2018-01-01

For the least-squares analysis of data having multiple uncertain variables, the generally accepted best solution comes from minimizing the sum of weighted squared residuals over all uncertain variables, with, for example, weights in x[subscript i] taken as inversely proportional to the variance [delta][subscript xi][superscript 2]. A complication…

Acceptability of financial incentives for maintenance of weight loss in mid-older adults: a mixed methods study.

PubMed

McGill, Bronwyn; O'Hara, Blythe J; Grunseit, Anne C; Bauman, Adrian; Osborne, Dale; Lawler, Luke; Phongsavan, Philayrath

2018-02-13

Health insurers worldwide implement financial incentive schemes to encourage health-related behaviours, including to facilitate weight loss. The maintenance of weight loss is a public health challenge, and as non-communicable diseases become more prevalent with increasing age, mid-older adults could benefit from programs which motivate weight loss maintenance. However, little is understood about their perceptions of using financial incentives to maintain weight loss. We used mixed methods to explore the attitudes and views of participants who had completed an Australian weight loss and lifestyle modification program offered to overweight and obese health insurance members with weight-related chronic diseases, about the acceptability and usefulness of different types of financial incentives to support weight loss maintenance. An online survey was completed by 130 respondents (mean age = 64 years); and a further 28 participants (mean age = 65 years) attended six focus groups. Both independent samples of participants supported a formalised maintenance program. Online survey respondents reported that non-cash (85.2%) and cash (77%) incentives would be potentially motivating; but only 40.5% reported that deposit contracts would motivate weight loss maintenance. Results of in-depth discussions found overall low support for any type of financial incentive, but particularly deposit contracts and lotteries. Some participants expressed that improved health was of more value than a monetary incentive and that they felt personally responsible for their own health, which was at odds with the idea of financial incentives. Others suggested ongoing program and peer support as potentially useful for weight loss maintenance. If financial incentives are considered for mid-older Australian adults in the health insurance setting, program planners will need to balance the discordance between participant beliefs about the individual responsibility for health and their desire for external supports to motivate and sustain weight loss maintenance.

Biofeedback in Partial Weight Bearing: Validity of 3 Different Devices.

PubMed

van Lieshout, Remko; Stukstette, Mirelle J; de Bie, Rob A; Vanwanseele, Benedicte; Pisters, Martijn F

2016-11-01

Study Design Controlled laboratory study to assess criterion-related validity, with a cross-sectional within-subject design. Background Patients with orthopaedic conditions have difficulties complying with partial weight-bearing instructions. Technological advances have resulted in biofeedback devices that offer real-time feedback. However, the accuracy of these devices is mostly unknown. Inaccurate feedback can result in incorrect lower-limb loading and may lead to delayed healing. Objectives To investigate validity of peak force measurements obtained using 3 different biofeedback devices under varying levels of partial weight-bearing categories. Methods Validity of 3 biofeedback devices (OpenGo science, SmartStep, and SensiStep) was assessed. Healthy participants were instructed to walk at a self-selected speed with crutches under 3 different weight-bearing conditions, categorized as a percentage range of body weight: 1% to 20%, greater than 20% to 50%, and greater than 50% to 75%. Peak force data from the biofeedback devices were compared with the peak vertical ground reaction force measured with a force plate. Criterion validity was estimated using simple and regression-based Bland-Altman 95% limits of agreement and weighted kappas. Results Fifty-five healthy adults (58% male) participated. Agreement with the gold standard was substantial for the SmartStep, moderate for OpenGo science, and slight for SensiStep (weighted ± = 0.76, 0.58, and 0.19, respectively). For the 1% to 20% and greater than 20% to 50% weight-bearing categories, both the OpenGo science and SmartStep had acceptable limits of agreement. For the weight-bearing category greater than 50% to 75%, none of the devices had acceptable agreement. Conclusion The OpenGo science and SmartStep provided valid feedback in the lower weight-bearing categories, and the SensiStep showed poor validity of feedback in all weight-bearing categories. J Orthop Sports Phys Ther 2016;46(11):-1. Epub 12 Oct 2016. doi:10.2519/jospt.2016.6625.

Effect of Background Pressure on the Performance and Plume of the HiVHAc Hall Thruster

NASA Technical Reports Server (NTRS)

Huang, Wensheng; Kamhawi, Hani; Haag, Thomas

2013-01-01

During the Single String Integration Test of the NASA HiVHAc Hall thruster, a number of plasma diagnostics were implemented to study the effect of varying facility background pressure on thruster operation. These diagnostics include thrust stand, Faraday probe, ExB probe, and retarding potential analyzer. The test results indicated a rise in thrust and discharge current with background pressure. There was also a decrease in ion energy per charge, an increase in multiply-charged species production, a decrease in plume divergence, and a decrease in ion beam current with increasing background pressure. A simplified ingestion model was applied to determine the maximum acceptable background pressure for thrust measurement. The maximum acceptable ingestion percentage was found to be around 1%. Examination of the diagnostics results suggest the ionization and acceleration zones of the thruster were shifting upstream with increasing background pressure.

Development of spiral-groove self-acting face seals

NASA Technical Reports Server (NTRS)

Obrien, M.

1977-01-01

An experimental evaluation and a 100-hour endurance test were performed on a spiral groove geometry, self-acting face seal. The seal was tested and operated successfully at maximum conditions of 243.8 m/s surface speed, 199.9 N/sq cm air pressure, and 645.4K (702 F) air temperature. The maximum speed condition of 243.8 m/s was obtained at a shaft speed of 72,500 rpm. Seal wear, gas leakage, and sealing element temperature were monitored during the test. Condition of the seal at the completion of the test was documented and found acceptable for further use. The spiral groove wear rate measured during the endurance test indicates a minimum potential seal life of over 2700 hours. Seal air leakage measured during the test program is within the range considered acceptable for consideration for use in a small gas turbine engine.

Synthesis and evaluation of changes induced by solvent and substituent in electronic absorption spectra of some azo disperse dyes

NASA Astrophysics Data System (ADS)

Mohammadi, Asadollah; Yazdanbakhsh, Mohammad Reza; Farahnak, Lahya

2012-04-01

Five azo disperse dyes were prepared by diazotizing 4'-aminoacetophenone and p-anisidine and coupling with varies N-alkylated aromatic amines. Characterization of the dyes was carried out by using UV-vis, FTIR and 1H NMR spectroscopic techniques. The electronic absorption spectra of dyes are determined at room temperature in fifteen solvents with different polarities. The solvent dependent maximum absorption band shifts, were investigated using dielectric constant (ɛ), refractive index (n) and Kamlet-Taft polarity parameters (hydrogen bond donating ability (α), hydrogen bond accepting ability (β) and dipolarity/polarizability polarity scale (π*)). Acceptable agreement was found between the maximum absorption band of dyes and solvent polarity parameters especially with π*. The effect of substituents of coupler and/or diazo component on the color of dyes was investigated. The effects of acid and base on the visible absorption maxima of the dyes are also reported.

The Impacts of Rising Temperatures on Aircraft Takeoff Performance

NASA Technical Reports Server (NTRS)

Coffel, Ethan; Thompson, Terence R.; Horton, Radley M.

2017-01-01

Steadily rising mean and extreme temperatures as a result of climate change will likely impact the air transportation system over the coming decades. As air temperatures rise at constant pressure, air density declines, resulting in less lift generation by an aircraft wing at a given airspeed and potentially imposing a weight restriction on departing aircraft. This study presents a general model to project future weight restrictions across a fleet of aircraft with different takeoff weights operating at a variety of airports. We construct performance models for five common commercial aircraft and 19 major airports around the world and use projections of daily temperatures from the CMIP5 model suite under the RCP 4.5 and RCP 8.5 emissions scenarios to calculate required hourly weight restriction. We find that on average, 10 - 30% of annual flights departing at the time of daily maximum temperature may require some weight restriction below their maximum takeoff weights, with mean restrictions ranging from 0.5 to 4% of total aircraft payload and fuel capacity by mid- to late century. Both mid-sized and large aircraft are affected, and airports with short runways and high temperatures, or those at high elevations, will see the largest impacts. Our results suggest that weight restriction may impose a non-trivial cost on airlines and impact aviation operations around the world and that adaptation may be required in aircraft design, airline schedules, and/or runway lengths.

The Impact of Rising Temperatures on Aircraft Takeoff Performance

NASA Astrophysics Data System (ADS)

Coffel, E.; Horton, R. M.; Thompson, T. R.

2017-12-01

Steadily rising mean and extreme temperatures as a result of climate change will likely impact the air transportation system over the coming decades. As air temperatures rise at constant pressure, air density declines, resulting in less lift generation by an aircraft wing at a given airspeed and potentially imposing a weight restriction on departing aircraft. This study presents a general model to project future weight restrictions across a fleet of aircraft with different takeoff weights operating at a variety of airports. We construct performance models for five common commercial aircraft and 19 major airports around the world and use projections of daily temperatures from the CMIP5 model suite under the RCP 4.5 and RCP 8.5 emissions scenarios to calculate required hourly weight restriction. We find that on average, 10-30% of annual flights departing at the time of daily maximum temperature may require some weight restriction below their maximum takeoff weights, with mean restrictions ranging from 0.5 to 4% of total aircraft payload and fuel capacity by mid- to late century. Both mid-sized and large aircraft are affected, and airports with short runways and high tempera- tures, or those at high elevations, will see the largest impacts. Our results suggest that weight restriction may impose a non-trivial cost on airlines and impact aviation operations around the world and that adaptation may be required in aircraft design, airline schedules, and/or runway lengths.

Effect of age and sex on lacosamide pharmacokinetics in healthy adult subjects and adults with focal epilepsy.

PubMed

Schaefer, Carina; Cawello, Willi; Waitzinger, Josef; Elshoff, Jan-Peer

2015-04-01

Age- and sex-related differences in body composition could affect the pharmacokinetic parameters of administered drugs. The purpose of this post hoc analysis was to investigate the influences of age and sex on the pharmacokinetics of lacosamide. This post hoc analysis used pharmacokinetic data taken at steady state from (i) two phase I studies of oral lacosamide in healthy adult subjects (n = 66), and (ii) a population pharmacokinetic analysis carried out using data from two phase III studies of adjunctive oral lacosamide in adults (n = 565) with focal epilepsy taking 1-3 concomitant anti-epileptic drugs. Phase I data were stratified by age and sex as 'younger female' (aged 18-40 years), 'younger male' (aged 18-45 years) or 'elderly male/female' (aged ≥65 years), then normalized by body weight (lean body weight or fat-free mass), height or volume of distribution, and analysed using non-compartmental analysis. Population pharmacokinetic data were stratified by sex and analysed using a one-compartment model. Minor numerical differences between lacosamide exposure [the area under the concentration-time curve at steady state over the dosage interval (AUCτ,ss)] and the maximum plasma concentration at steady state (C max,ss) in subjects of different ages or sexes were noted. The differences could be explained by a scaling factor between the drug applied and the plasma concentration. Following normalization by lean body weight or volume of distribution, an analysis of relative bioavailability resulted in 90 % confidence intervals of the ratios for AUCτ,ss and C max,ss for age (elderly to younger) or sex (male to female) falling within the range accepted for equivalence (80-125 %); without normalization, the 90 % confidence intervals were outside this range. Minor numerical differences in lacosamide plasma concentrations were noted in the comparison between male and female patients (aged 16-71 years) with focal epilepsy. Simulations using different body weights demonstrated a minimal effect of body weight on lacosamide plasma concentrations in adult patients with focal epilepsy. Age and sex had no relevant effects on the rates of absorption and elimination of lacosamide in this post hoc analysis, as the minor numerical differences could be explained by the main scaling factor for body weight or volume of distribution. The pharmacokinetic profile of lacosamide was unaffected by age or sex in adults with focal epilepsy.

Energy-restricted, high-protein diets more effectively impact cardiometabolic profile in overweight and obese women than lower-protein diets.

PubMed

Mateo-Gallego, Rocío; Marco-Benedí, Victoria; Perez-Calahorra, Sofía; Bea, Ana M; Baila-Rueda, Lucía; Lamiquiz-Moneo, Itziar; de Castro-Orós, Isabel; Cenarro, Ana; Civeira, Fernando

2017-04-01

High-protein energy-restricted diets have demonstrated efficacy in promoting weight loss in overweight and obesity. However, the protein percentage that achieves optimal efficacy and acceptability remains unknown. We sought to assess the effects of three energy-reduced diets with different percentages of calories from protein (20%, 27%, and 35%) on weight loss and lipids. Secondary outcomes included diet acceptability and compliance. Six-month, randomized study included women aged 18-80 years with BMI of 27.5-45 kg/m 2 and who were not taking lipid-lowering drugs. We randomly assigned 91 women to one of three calorie-reduced diets with: protein, 20%, 27%, or 35% (80% from animal protein); carbohydrates, 50%, 43%, or 35%; fat, 30%. Dietary intervention involved individual visits with a nutritionist every 2 weeks during the first 3 months. We performed a follow-up visit at 6 months. Eighty women aged 44.0 ± 9.08 years with BMI of 37.7 ± 3.39 kg/m 2 completed the study. At 3 months, weight loss was -8.16 ± 4.18 kg, -9.66 ± 5.28 kg, and -10.7 ± 4.28 kg in the 20%, 27%, and 35%-protein groups, respectively (P = 0.16). These figures slightly and homogeneously increased at 6 months. Around 65% of women following 35%-protein diet lost ≥10% of body weight vs. ∼33% in 20%-protein group (P = 0.023). Significant decreases occurred in fat mass, lipids and insulin resistance, especially in the 35%-protein group (P < 0.05 vs. 20% protein). This improvement was not fully explained by weight loss. Triglyceride change was negatively correlated with animal-protein intake. All groups provided similar responses to an acceptance, palatability, and satisfaction questionnaire. An energy-restricted diet with 35% protein, mostly of animal origin, more effectively impacts cardiometabolic profile than an energy-restricted diet with lower protein content although no clear benefit between diets in terms of overall weight loss was observed. The high-protein diet displayed an excellent safety profile and acceptability. This trial was registered in ClinicalTrials.gov as NCT02160496. The clinical trial has been registered in ClinicalTrials.gov (Identifier: NCT02160496). Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

Eating disorder pathology in elite adolescent athletes.

PubMed

Giel, Katrin Elisabeth; Hermann-Werner, Anne; Mayer, Jochen; Diehl, Katharina; Schneider, Sven; Thiel, Ansgar; Zipfel, Stephan

2016-06-01

We aimed to investigate eating disorder pathology in German elite adolescent athletes. Evidence suggests that eating disorder pathology is more common in adult elite sports, especially in female athletes and in sports emphasizing leanness. There is a scarcity of studies in elite adolescent athletes who are in a vulnerable developmental stage and are affected by general as well as sport-specific risk factors. Our data was derived from the German Young Olympic Athletes' Lifestyle and Health Management Study (GOAL) which conducted a survey in 1138 elite adolescent athletes. In this sample, we assessed body weight, weight control behavior, body acceptance and screened overall for core symptoms of eating disorders, depression and anxiety. We performed a tree analysis to identify high risk groups for eating disorder pathology. High risk groups comprised (a) athletes competing in weight dependent sports, and among athletes competing in disciplines other than weight dependent sports (b) athletes who are high on negative affectivity, (c) female athletes and (d) male athletes competing in endurance, technical or power sports. Athletes competing in weight dependent disciplines reported wide spread use of compensatory behaviors to influence body weight. Athletes reporting eating disorder pathology showed higher levels of depression and anxiety than athletes without eating disorder pathology. Increased psychosocial burden in athletes with eating disorder pathology suggests that eating disorder symptoms should not be accepted as an unproblematic and functional part of elite sports. The prevention and management of eating disorder pathology is especially important in weight dependent sports. © 2016 Wiley Periodicals, Inc. (Int J Eat Disord 2016; 49:553-562). © 2016 Wiley Periodicals, Inc.

OMG Do Not Say LOL: Obese Adolescents’ Perspectives on the Content of Text Messages to Enhance Weight Loss Efforts

PubMed Central

Woolford, Susan J.; Barr, Kathryn L.C.; Derry, Holly A.; Jepson, Christina M.; Clark, Sarah J.; Strecher, Victor J.; Resnicow, Kenneth

2011-01-01

Adolescents participating in weight loss programs experience difficulty adhering to behavior change recommendations. Communications technology provides a low cost means to increase the frequency of contact with adolescents which can improve their engagement and also lead to behavior change. Within a larger project on the development of tailored text messages for adolescents enrolled in an existing multidisciplinary weight management program, this study explored participants’ perspectives about message content. A library of messages was developed focused on topics central to weight management. Four focus groups were conducted with a total of 24 participants from the weight management program to gage their reactions to the messages. Detailed notes from the focus groups were analyzed to assess the acceptability of individual messages and to identify overriding themes. Results indicate that participants were very enthusiastic about receiving text messages. They preferred messages that provided recipe ideas, included successful weight loss strategies used by peers, and requested feedback regarding their progress. They preferred positive, encouraging, and direct messages. They were unanimous that messages should include encouraging symbols (e.g., exclamation points and “smiley faces”) as often as possible. They emphasized that any mention of unhealthy foods or behaviors would trigger them to eat those foods or engage in those behaviors. Text messaging acronyms (e.g., LOL) were considered too informal for messages from healthcare providers. This study suggests that including text messages in obesity interventions is acceptable to obese adolescents as a means of supporting their weight loss efforts, and it highlights the need for such messages to be carefully constructed. PMID:21869762

14 CFR 27.321 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements Flight Loads § 27.321 General. (a) The flight load factor must be assumed to act normal to the longitudinal axis of the rotorcraft, and to be equal... from the design minimum weight to the design maximum weight; and (2) With any practical distribution of...

21 CFR 172.260 - Oxidized polyethylene.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION... polyethylene has a minimum number average molecular weight of 1,200, as determined by high temperature vapor pressure osmometry; contains a maximum of 5 percent by weight of total oxygen; and has an acid value of 9...

Fitting distributions to microbial contamination data collected with an unequal probability sampling design.

PubMed

Williams, M S; Ebel, E D; Cao, Y

2013-01-01

The fitting of statistical distributions to microbial sampling data is a common application in quantitative microbiology and risk assessment applications. An underlying assumption of most fitting techniques is that data are collected with simple random sampling, which is often times not the case. This study develops a weighted maximum likelihood estimation framework that is appropriate for microbiological samples that are collected with unequal probabilities of selection. A weighted maximum likelihood estimation framework is proposed for microbiological samples that are collected with unequal probabilities of selection. Two examples, based on the collection of food samples during processing, are provided to demonstrate the method and highlight the magnitude of biases in the maximum likelihood estimator when data are inappropriately treated as a simple random sample. Failure to properly weight samples to account for how data are collected can introduce substantial biases into inferences drawn from the data. The proposed methodology will reduce or eliminate an important source of bias in inferences drawn from the analysis of microbial data. This will also make comparisons between studies and the combination of results from different studies more reliable, which is important for risk assessment applications. © 2012 No claim to US Government works.

A low-power, high-throughput maximum-likelihood convolutional decoder chip for NASA's 30/20 GHz program

NASA Technical Reports Server (NTRS)

Mccallister, R. D.; Crawford, J. J.

1981-01-01

It is pointed out that the NASA 30/20 GHz program will place in geosynchronous orbit a technically advanced communication satellite which can process time-division multiple access (TDMA) information bursts with a data throughput in excess of 4 GBPS. To guarantee acceptable data quality during periods of signal attenuation it will be necessary to provide a significant forward error correction (FEC) capability. Convolutional decoding (utilizing the maximum-likelihood techniques) was identified as the most attractive FEC strategy. Design trade-offs regarding a maximum-likelihood convolutional decoder (MCD) in a single-chip CMOS implementation are discussed.

Patient opinions regarding 'pay for performance for patients'.

PubMed

Long, Judith A; Helweg-Larsen, Marie; Volpp, Kevin G

2008-10-01

Pay for performance (P4P) programs have shown only modest improvements in outcomes and do not target patient behaviors. Many large employers and payers are turning to pay for performance for patients (P4P4P) to reduce health costs and improve the health of their covered populations. How these programs may be perceived by patients is unknown. To assess patients' opinion of the acceptability of P4P4P. Cross-sectional self-administered survey. Patients in waiting rooms in two university-based primary care clinics. Participants were asked their opinions about paying people to quit smoking, lose weight, control their blood pressure, or control their diabetes. Respondents were split on whether P4P4P is desirable. Thirty-six to 42% thought it was a good/excellent idea to pay smokers to quit smoking, obese people to lose weight, people with hypertension to control their blood pressure, or people with diabetes to control their blood sugar, while 41-44% of the sample thought it was a bad/very bad idea. Smokers and patients who were obese endorsed P4P4P more favorably as a means to achieving tobacco cessation and weight loss than their non-smoking and non-obese counterparts. Acceptance of paying patients for performance by the general population is equivocal. Establishing the efficacy of paying patients for performance may help it gain wider acceptance.

Weight loss in a UK commercial all meal provision study: a randomised controlled trial.

PubMed

Mellor, D D; Whitham, C; Goodwin, S; Morris, M; Reid, M; Atkin, S L

2014-08-01

Effective approaches are needed to address the increasing prevalence of overweight and obesity. The present study investigated whether all meal provision was a more effective and acceptable method for weight loss than a self-directed diet. This randomised controlled trial recruited 112 men and women with a body mass index in the range 27-35 kg m(-2), who had no comorbidities, from the local area of Hull. Participants were randomised to receive either meal provision or follow a self-directed diet for a 12-week period that resulted in an estimated 2928 kJ day(-1) (700 kcal day(-1)) deficit. A dietitian supervised both dietary interventions. At 12 weeks [mean (SEM)], percentage weight loss in the meal provision group was 6.6% (0.5%) compared to 4.3% (0.6%) for those on the self-directed diet. In terms of clinically relevant weight loss, 61% of participants lost 5% or more of their body weight with meal provision compared to 22% on the self-directed diet (P < 0.001). Weight loss was associated with wellbeing in both groups. Attrition was less apparent with 7% of those participants receiving meal provision withdrawing from the study compared to 41% of those following the self-directed diet (P < 0.001). Meal provision was a more effective and accepted method for weight loss over a 12-week period compared to a self-directed diet. This may in part represent the difference between being given the meal provision food free of charge. However, longer-term maintenance studies need to be undertaken to ascertain their effects on the maintenance of weight loss. © 2013 The Authors. Journal of Human Nutrition and Dietetics published by John Wiley & Sons Ltd on behalf of British Dietetic Association Ltd.

76 FR 61269 - Protection of Stratospheric Ozone: acceptability Determination 26 for Significant New...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-04

...://www.regulations.gov . A. Refrigeration and Air Conditioning 1. Hot Shot 2 EPA's decision: EPA finds Hot Shot 2 is acceptable as a substitute for CFC-12, CFC-11, CFC-113, CFC-114, R-13B1, R-500, R-502... conditioning and heat pumps Hot Shot 2 is a blend by weight of 79.3 percent HFC-134a, which is also known as 1...

Analysis and prediction of operating vehicle load effects on Highway bridges under the weight charge policy

NASA Astrophysics Data System (ADS)

Huang, Haiyun; Zhang, Junping; Li, Yonghe

2018-05-01

Under the weight charge policy, the weigh in motion data at a toll station on the Jing-Zhu Expressway were collected. The statistic analysis of vehicle load data was carried out. For calculating the operating vehicle load effects on bridges, by Monte Carlo method used to generate random traffic flow and influence line loading method, the maximum bending moment effect of simple supported beams were obtained. The extreme value I distribution and normal distribution were used to simulate the distribution of the maximum bending moment effect. By the extrapolation of Rice formula and the extreme value I distribution, the predicted values of the maximum load effects were obtained. By comparing with vehicle load effect according to current specification, some references were provided for the management of the operating vehicles and the revision of the bridge specifications.

Determining the optimal load for jump squats: a review of methods and calculations.

PubMed

Dugan, Eric L; Doyle, Tim L A; Humphries, Brendan; Hasson, Christopher J; Newton, Robert U

2004-08-01

There has been an increasing volume of research focused on the load that elicits maximum power output during jump squats. Because of a lack of standardization for data collection and analysis protocols, results of much of this research are contradictory. The purpose of this paper is to examine why differing methods of data collection and analysis can lead to conflicting results for maximum power and associated optimal load. Six topics relevant to measurement and reporting of maximum power and optimal load are addressed: (a) data collection equipment, (b) inclusion or exclusion of body weight force in calculations of power, (c) free weight versus Smith machine jump squats, (d) reporting of average versus peak power, (e) reporting of load intensity, and (f) instructions given to athletes/ participants. Based on this information, a standardized protocol for data collection and reporting of jump squat power and optimal load is presented.

MSClique: Multiple Structure Discovery through the Maximum Weighted Clique Problem.

PubMed

Sanroma, Gerard; Penate-Sanchez, Adrian; Alquézar, René; Serratosa, Francesc; Moreno-Noguer, Francesc; Andrade-Cetto, Juan; González Ballester, Miguel Ángel

2016-01-01

We present a novel approach for feature correspondence and multiple structure discovery in computer vision. In contrast to existing methods, we exploit the fact that point-sets on the same structure usually lie close to each other, thus forming clusters in the image. Given a pair of input images, we initially extract points of interest and extract hierarchical representations by agglomerative clustering. We use the maximum weighted clique problem to find the set of corresponding clusters with maximum number of inliers representing the multiple structures at the correct scales. Our method is parameter-free and only needs two sets of points along with their tentative correspondences, thus being extremely easy to use. We demonstrate the effectiveness of our method in multiple-structure fitting experiments in both publicly available and in-house datasets. As shown in the experiments, our approach finds a higher number of structures containing fewer outliers compared to state-of-the-art methods.

Local tolerance testing under REACH: Accepted non-animal methods are not on equal footing with animal tests.

PubMed

Sauer, Ursula G; Hill, Erin H; Curren, Rodger D; Raabe, Hans A; Kolle, Susanne N; Teubner, Wera; Mehling, Annette; Landsiedel, Robert

2016-07-01

In general, no single non-animal method can cover the complexity of any given animal test. Therefore, fixed sets of in vitro (and in chemico) methods have been combined into testing strategies for skin and eye irritation and skin sensitisation testing, with pre-defined prediction models for substance classification. Many of these methods have been adopted as OECD test guidelines. Various testing strategies have been successfully validated in extensive in-house and inter-laboratory studies, but they have not yet received formal acceptance for substance classification. Therefore, under the European REACH Regulation, data from testing strategies can, in general, only be used in so-called weight-of-evidence approaches. While animal testing data generated under the specific REACH information requirements are per se sufficient, the sufficiency of weight-of-evidence approaches can be questioned under the REACH system, and further animal testing can be required. This constitutes an imbalance between the regulatory acceptance of data from approved non-animal methods and animal tests that is not justified on scientific grounds. To ensure that testing strategies for local tolerance testing truly serve to replace animal testing for the REACH registration 2018 deadline (when the majority of existing chemicals have to be registered), clarity on their regulatory acceptance as complete replacements is urgently required. 2016 FRAME.

Reasons for raising the maximum acceptable daily intake of EDTA and the benefits for iron fortification of foods for children 6–24 months of age

PubMed Central

Wreesmann, Carel Theo Jozef

2014-01-01

The current maximum acceptable daily intake (ADI) of ethylenediaminetetraacetic acid (EDTA) of 1.9 mg day−1 per kilogram bodyweight (mg day−1 kgbw−1) limits the daily intake of iron as iron EDTA [ferric sodium EDTA; sodium iron(III) EDTA] to approximately 2–2.5 mg day−1 for children 6–24 months of age. This limit was defined by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) in 1973 based on data from an animal-feed study published in 1963. Other animal studies indicate that this limit can be raised to 4.4 or possibly up to 21.7 mg day−1 kgbw−1, which is 2.3–11.4 times higher than the current value. For nearly 50 years, iron EDTA has been used in France in medicinal syrup for infants 1–6 months of age. The maximum recommended dosage of this drug is 37 times higher than the maximum ADI of EDTA. No adverse health effects have been reported as a result of this medicinal consumption of iron EDTA. Raising the maximum ADI of EDTA to only 4.4 mg day−1 kgbw−1 would enable iron EDTA, an iron fortificant with proven bioavailability in phytate-rich meals, to be added in adequate amounts to cereal-based meals for children 6–24 months of age, who are at risk of iron deficiency. PMID:24521261

Reasons for raising the maximum acceptable daily intake of EDTA and the benefits for iron fortification of foods for children 6-24 months of age.

PubMed

Wreesmann, Carel Theo Jozef

2014-10-01

The current maximum acceptable daily intake (ADI) of ethylenediaminetetraacetic acid (EDTA) of 1.9 mg day(-1) per kilogram bodyweight (mg day(-1)  kgbw(-1) ) limits the daily intake of iron as iron EDTA [ferric sodium EDTA; sodium iron(III) EDTA] to approximately 2-2.5 mg day(-1) for children 6-24 months of age. This limit was defined by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) in 1973 based on data from an animal-feed study published in 1963. Other animal studies indicate that this limit can be raised to 4.4 or possibly up to 21.7 mg day(-1)  kgbw(-1) , which is 2.3-11.4 times higher than the current value. For nearly 50 years, iron EDTA has been used in France in medicinal syrup for infants 1-6 months of age. The maximum recommended dosage of this drug is 37 times higher than the maximum ADI of EDTA. No adverse health effects have been reported as a result of this medicinal consumption of iron EDTA. Raising the maximum ADI of EDTA to only 4.4 mg day(-1)  kgbw(-1) would enable iron EDTA, an iron fortificant with proven bioavailability in phytate-rich meals, to be added in adequate amounts to cereal-based meals for children 6-24 months of age, who are at risk of iron deficiency. © 2014 The Authors. Maternal & Child Nutrition published by John Wiley & Sons Ltd.

Adolescent exercise associated with long-term superior measures of bone geometry: a cross-sectional DXA and MRI study.

PubMed

Kato, T; Yamashita, T; Mizutani, S; Honda, A; Matumoto, M; Umemura, Y

2009-12-01

To investigate whether childhood sports participation, particularly weight-bearing sports, has any effect on bone mineral content (BMC), areal bone mineral density (aBMD) and bone geometric characteristics in middle-aged postmenopausal women. Design/ In this cross-sectional comparison of two groups, 46 middle-aged women (mean age, 60.2 (SD 5.6) years; range, 52-73 years) were grouped according to sport participation during growth: weight-bearing sports, including high-impact weight-bearing activities; and low-impact non-weight-bearing sports or no participation. Dual energy X-ray absorptiometry (DXA)-measured BMC, aBMD in the lumbar spine and femur. Magnetic resonance imaging (MRI) determined bone geometric characteristics in the femur, such as femoral mid-diaphyseal cross-sectional area, periosteal and endosteal perimeters and maximum and minimum second moment of area. Postmenopausal middle-aged women with participation in weight-bearing sports during junior high to high school (12-18 years old) displayed significantly greater BMC in both lumbar spine and femoral neck regions, and also significantly greater femoral mid-diaphyseal bone cross-sectional area, periosteal perimeter and maximum and minimum second moment of area than the non-weight-bearing sports group. Adolescent weight-bearing exercise exerts preservational effects on femoral mid-diaphyseal size and shape, while DXA-measured BMC effectively identified the same tendency. Weight-bearing exercise in youth affects bone, and these effects may be preserved as BMC, geometric and structural advantages even after 40 years.

COSP for Windows: Strategies for Rapid Analyses of Cyclic Oxidation Behavior

NASA Technical Reports Server (NTRS)

Smialek, James L.; Auping, Judith V.

2002-01-01

COSP is a publicly available computer program that models the cyclic oxidation weight gain and spallation process. Inputs to the model include the selection of an oxidation growth law and a spalling geometry, plus oxide phase, growth rate, spall constant, and cycle duration parameters. Output includes weight change, the amounts of retained and spalled oxide, the total oxygen and metal consumed, and the terminal rates of weight loss and metal consumption. The present version is Windows based and can accordingly be operated conveniently while other applications remain open for importing experimental weight change data, storing model output data, or plotting model curves. Point-and-click operating features include multiple drop-down menus for input parameters, data importing, and quick, on-screen plots showing one selection of the six output parameters for up to 10 models. A run summary text lists various characteristic parameters that are helpful in describing cyclic behavior, such as the maximum weight change, the number of cycles to reach the maximum weight gain or zero weight change, the ratio of these, and the final rate of weight loss. The program includes save and print options as well as a help file. Families of model curves readily show the sensitivity to various input parameters. The cyclic behaviors of nickel aluminide (NiAl) and a complex superalloy are shown to be properly fitted by model curves. However, caution is always advised regarding the uniqueness claimed for any specific set of input parameters,

46 CFR 164.023-11 - Acceptance tests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... identification tests are conducted: (1) The average length/weight ratio of the thread in meters per kilogram... analysis, thermogravimetric analysis, differential scanning calorimeter, or other equivalent means adequate...

The theory of maximally and minimally even sets, the one- dimensional antiferromagnetic Ising model, and the continued fraction compromise of musical scales

NASA Astrophysics Data System (ADS)

Douthett, Elwood (Jack) Moser, Jr.

1999-10-01

Cyclic configurations of white and black sites, together with convex (concave) functions used to weight path length, are investigated. The weights of the white set and black set are the sums of the weights of the paths connecting the white sites and black sites, respectively, and the weight between sets is the sum of the weights of the paths that connect sites opposite in color. It is shown that when the weights of all configurations of a fixed number of white and a fixed number of black sites are compared, minimum (maximum) weight of a white set, minimum (maximum) weight of the a black set, and maximum (minimum) weight between sets occur simultaneously. Such configurations are called maximally even configurations. Similarly, the configurations whose weights are the opposite extremes occur simultaneously and are called minimally even configurations. Algorithms that generate these configurations are constructed and applied to the one- dimensional antiferromagnetic spin-1/2 Ising model. Next the goodness of continued fractions as applied to musical intervals (frequency ratios and their base 2 logarithms) is explored. It is shown that, for the intermediate convergents between two consecutive principal convergents of an irrational number, the first half of the intermediate convergents are poorer approximations than the preceding principal convergent while the second half are better approximations; the goodness of a middle intermediate convergent can only be determined by calculation. These convergents are used to determine what equal-tempered systems have intervals that most closely approximate the musical fifth (pn/ qn = log2(3/2)). The goodness of exponentiated convergents ( 2pn/qn~3/2 ) is also investigated. It is shown that, with the exception of a middle convergent, the goodness of the exponential form agrees with that of its logarithmic Counterpart As in the case of the logarithmic form, the goodness of a middle intermediate convergent in the exponential form can only be determined by calculation. A Desirability Function is constructed that simultaneously measures how well multiple intervals fit in a given equal-tempered system. These measurements are made for octave (base 2) and tritave systems (base 3). Combinatorial properties important to music modulation are considered. These considerations lead These considerations lead to the construction of maximally even scales as partitions of an equal-tempered system.

Possibilities of ground penetrating radar usage within acceptance tests of rigid pavements

NASA Astrophysics Data System (ADS)

Stryk, Josef; Matula, Radek; Pospisil, Karel

2013-10-01

Within the road pavement acceptance tests, destructive as well as non-destructive tests of individual road layers are performed to verify the standard requirements. The article describes a method for providing quick, effective and sufficiently accurate measurements of both dowel and tie bar positions in concrete pavements, using a two-channel ground penetrating radar (GPR). Measurements were carried out in laboratory and in-situ conditions. A special hand cart for field measurements, set for the testing requirements, was designed. It was verified that following the correct measuring and assessment method, it is possible to reach accuracy of determining the in-built rebar up to 1 cm in vertical direction and up to 1.5 cm per 11.5 m of measured length in horizontal direction. In the in-situ tests, GPR identification of possible anomalies due to the phase of concrete pavement laying was presented. In the conclusion, a measurement report is mentioned. The standard requirements for the position of dowels and tie bars cover maximum possible deviation of the rebar position from the project documentation in vertical and horizontal direction, maximum deflection of rebar ends to each other, and maximum translation of rebar in the direction of its longitudinal axis.

Muscle performance following an acute bout of plyometric training combined with low or high intensity weight exercise.

PubMed

Beneka, Anastasia G; Malliou, Paraskevi K; Missailidou, Victoria; Chatzinikolaou, Athanasios; Fatouros, Ioannis; Gourgoulis, Vassilios; Georgiadis, Elias

2013-01-01

To determine the time course of performance responses after an acute bout of plyometric exercise combined with high and low intensity weight training, a 3-group (including a control group), repeated-measures design was employed. Changes in performance were monitored through jumping ability by measuring countermovement and squat jumping, and strength performance assessment through isometric and isokinetic testing of knee extensors (at two different velocities). Participants in both experimental groups performed a plyometric protocol consisting of 50 jumps over 50 cm hurdles and 50 drop jumps from a 50 cm plyometric box. Additionally, each group performed two basic weight exercises consisting of leg presses and leg extensions at 90-95% of maximum muscle strength for the high intensity group and 60% of maximum muscle strength for the low intensity group. The results of the study suggest that an acute bout of intense plyometric exercise combined with weight exercise induces time-dependent changes in performance, which are also dependent on the nature of exercise protocol and testing procedures. In conclusion, acute plyometric exercise with weight exercise may induce a substantial decline in jumping performance for as long as 72 hours but not in other forms of muscle strength.

Prediction of the Maximum Number of Repetitions and Repetitions in Reserve From Barbell Velocity.

PubMed

García-Ramos, Amador; Torrejón, Alejandro; Feriche, Belén; Morales-Artacho, Antonio J; Pérez-Castilla, Alejandro; Padial, Paulino; Haff, Guy Gregory

2018-03-01

To provide 2 general equations to estimate the maximum possible number of repetitions (XRM) from the mean velocity (MV) of the barbell and the MV associated with a given number of repetitions in reserve, as well as to determine the between-sessions reliability of the MV associated with each XRM. After determination of the bench-press 1-repetition maximum (1RM; 1.15 ± 0.21 kg/kg body mass), 21 men (age 23.0 ± 2.7 y, body mass 72.7 ± 8.3 kg, body height 1.77 ± 0.07 m) completed 4 sets of as many repetitions as possible against relative loads of 60%1RM, 70%1RM, 80%1RM, and 90%1RM over 2 separate sessions. The different loads were tested in a randomized order with 10 min of rest between them. All repetitions were performed at the maximum intended velocity. Both the general equation to predict the XRM from the fastest MV of the set (CV = 15.8-18.5%) and the general equation to predict MV associated with a given number of repetitions in reserve (CV = 14.6-28.8%) failed to provide data with acceptable between-subjects variability. However, a strong relationship (median r 2  = .984) and acceptable reliability (CV < 10% and ICC > .85) were observed between the fastest MV of the set and the XRM when considering individual data. These results indicate that generalized group equations are not acceptable methods for estimating the XRM-MV relationship or the number of repetitions in reserve. When attempting to estimate the XRM-MV relationship, one must use individualized relationships to objectively estimate the exact number of repetitions that can be performed in a training set.

Automatic treatment plan re-optimization for adaptive radiotherapy guided with the initial plan DVHs

NASA Astrophysics Data System (ADS)

Li, Nan; Zarepisheh, Masoud; Uribe-Sanchez, Andres; Moore, Kevin; Tian, Zhen; Zhen, Xin; Jiang Graves, Yan; Gautier, Quentin; Mell, Loren; Zhou, Linghong; Jia, Xun; Jiang, Steve

2013-12-01

Adaptive radiation therapy (ART) can reduce normal tissue toxicity and/or improve tumor control through treatment adaptations based on the current patient anatomy. Developing an efficient and effective re-planning algorithm is an important step toward the clinical realization of ART. For the re-planning process, manual trial-and-error approach to fine-tune planning parameters is time-consuming and is usually considered unpractical, especially for online ART. It is desirable to automate this step to yield a plan of acceptable quality with minimal interventions. In ART, prior information in the original plan is available, such as dose-volume histogram (DVH), which can be employed to facilitate the automatic re-planning process. The goal of this work is to develop an automatic re-planning algorithm to generate a plan with similar, or possibly better, DVH curves compared with the clinically delivered original plan. Specifically, our algorithm iterates the following two loops. An inner loop is the traditional fluence map optimization, in which we optimize a quadratic objective function penalizing the deviation of the dose received by each voxel from its prescribed or threshold dose with a set of fixed voxel weighting factors. In outer loop, the voxel weighting factors in the objective function are adjusted according to the deviation of the current DVH curves from those in the original plan. The process is repeated until the DVH curves are acceptable or maximum iteration step is reached. The whole algorithm is implemented on GPU for high efficiency. The feasibility of our algorithm has been demonstrated with three head-and-neck cancer IMRT cases, each having an initial planning CT scan and another treatment CT scan acquired in the middle of treatment course. Compared with the DVH curves in the original plan, the DVH curves in the resulting plan using our algorithm with 30 iterations are better for almost all structures. The re-optimization process takes about 30 s using our in-house optimization engine. This work was originally presented at the 54th AAPM annual meeting in Charlotte, NC, July 29-August 2, 2012.

Applying Bayesian Item Selection Approaches to Adaptive Tests Using Polytomous Items

ERIC Educational Resources Information Center

Penfield, Randall D.

2006-01-01

This study applied the maximum expected information (MEI) and the maximum posterior-weighted information (MPI) approaches of computer adaptive testing item selection to the case of a test using polytomous items following the partial credit model. The MEI and MPI approaches are described. A simulation study compared the efficiency of ability…

Comparison of image deconvolution algorithms on simulated and laboratory infrared images

DOE Office of Scientific and Technical Information (OSTI.GOV)

Proctor, D.

1994-11-15

We compare Maximum Likelihood, Maximum Entropy, Accelerated Lucy-Richardson, Weighted Goodness of Fit, and Pixon reconstructions of simple scenes as a function of signal-to-noise ratio for simulated images with randomly generated noise. Reconstruction results of infrared images taken with the TAISIR (Temperature and Imaging System InfraRed) are also discussed.

Effects of Estimation Bias on Multiple-Category Classification with an IRT-Based Adaptive Classification Procedure

ERIC Educational Resources Information Center

Yang, Xiangdong; Poggio, John C.; Glasnapp, Douglas R.

2006-01-01

The effects of five ability estimators, that is, maximum likelihood estimator, weighted likelihood estimator, maximum a posteriori, expected a posteriori, and Owen's sequential estimator, on the performances of the item response theory-based adaptive classification procedure on multiple categories were studied via simulations. The following…

Five Methods for Estimating Angoff Cut Scores with IRT

ERIC Educational Resources Information Center

Wyse, Adam E.

2017-01-01

This article illustrates five different methods for estimating Angoff cut scores using item response theory (IRT) models. These include maximum likelihood (ML), expected a priori (EAP), modal a priori (MAP), and weighted maximum likelihood (WML) estimators, as well as the most commonly used approach based on translating ratings through the test…

On the log-normality of historical magnetic-storm intensity statistics: implications for extreme-event probabilities

USGS Publications Warehouse

Love, Jeffrey J.; Rigler, E. Joshua; Pulkkinen, Antti; Riley, Pete

2015-01-01

An examination is made of the hypothesis that the statistics of magnetic-storm-maximum intensities are the realization of a log-normal stochastic process. Weighted least-squares and maximum-likelihood methods are used to fit log-normal functions to −Dst storm-time maxima for years 1957-2012; bootstrap analysis is used to established confidence limits on forecasts. Both methods provide fits that are reasonably consistent with the data; both methods also provide fits that are superior to those that can be made with a power-law function. In general, the maximum-likelihood method provides forecasts having tighter confidence intervals than those provided by weighted least-squares. From extrapolation of maximum-likelihood fits: a magnetic storm with intensity exceeding that of the 1859 Carrington event, −Dst≥850 nT, occurs about 1.13 times per century and a wide 95% confidence interval of [0.42,2.41] times per century; a 100-yr magnetic storm is identified as having a −Dst≥880 nT (greater than Carrington) but a wide 95% confidence interval of [490,1187] nT.

Acceptability and Potential Efficacy of Single-Sex After-School Activity Programs for Overweight and At-Risk Children: The Wollongong SPORT RCT.

PubMed

Jones, Rachel A; Kelly, Jacque; Cliff, Dylan P; Batterham, Marijka; Okely, Anthony D

2015-11-01

Single sex after-school physical activity programs show potential to prevent unhealthy weight gain. The aim of this study was to assess the acceptability and potential efficacy of single-sex after-school physical activity programs for overweight and at-risk children from low-income communities. 7-month, 2-arm parallel-group, RCT, conducted at an elementary school in a disadvantaged area in Wollongong, Australia (March-November 2010). 20 boys and 17 girls were randomized to intervention (PA) or active comparison groups (HL). Primary outcomes included implementation, acceptability, percentage body fat and BMI z-score. The PA programs were acceptable with high implementation and enjoyment rates. At 7 months postintervention girls in the PA group displayed greater changes in percentage body fat (adjust diff. = -1.70, [95% CI -3.25, -0.14]; d = -0.83) and BMI z-score (-0.19 [-0.36, -0.03]; d= -1.00). At 7 months boys in the PA group showed greater changes in waist circumference (-3.87 cm [-7.80, 0.15]; d= -0.90) and waist circumference z-score (-0.33 [-0.64, -0.03]; d= -0.98). For both boys' and girls' PA groups, changes in adiposity were not maintained at 12-month follow-up. Single-sex after-school physical activity programs are acceptable and potentially efficacious in preventing unhealthy weight gain among overweight and at-risk children. However improvements are hard to sustain once programs finish operating.

Concentrations and potential health risks of methyl tertiary-butyl ether (MTBE) in air and drinking water from Nanning, South China.

PubMed

Zhang, Li'e; Qin, Jian; Zhang, Zhiyong; Li, Qin; Huang, Jiongli; Peng, Xiaowu; Qing, Li; Liang, Guiqiang; Liang, Linhan; Huang, Yuman; Yang, Xiaobo; Zou, Yunfeng

2016-01-15

Levels of methyl tertiary-butyl ether (MTBE) in occupational air, ambient air, and drinking water in Nanning, South China, were investigated, and then their potential health risks to occupational workers and the general public were evaluated. Results show that the MTBE concentration in occupational air from 13 service stations was significantly higher than that in ambient air from residential areas (p<0.0001); both are far lower than the threshold limit value-time weighted average of MTBE regulated in the United States (US). The drinking water samples from household taps yielded detectable MTBE in the range of 0.04-0.33 μg/L, which is below the US drinking water standard of 20-40 μg/L. The non-carcinogenic risk of MTBE from air inhalation may be negligible because the calculated hazard quotient was less than 1. The mean MTBE lifetime cancer risk was within the acceptable limit of 1 × 10(-6) to 1 × 10(-4), but the lifetime cancer risk of refueling workers in the urban service station at the 95th percentile slightly exceeded the maximum acceptable carcinogen risk (1 × 10(-4)), indicating the potential carcinogenic health effects on the population highly exposed to MTBE in this region. The hazard index and carcinogenic risk of MTBE in drinking water were significantly lower than the safe limit of US Environmental Protection Agency, suggesting that drinking water unlikely poses significant health risks to the residents in Nanning. Copyright © 2015 Elsevier B.V. All rights reserved.

Optimization of traffic data collection for specific pavement design applications.

DOT National Transportation Integrated Search

2006-05-01

The objective of this study is to establish the minimum traffic data collection effort required for pavement design applications satisfying a maximum acceptable error under a prescribed confidence level. The approach consists of simulating the traffi...

Hydrostatic Bearing Pad Maximum Load and Overturning Conditions for the 70-meter Antenna

NASA Technical Reports Server (NTRS)

Mcginness, H. D.

1985-01-01

The reflector diameters of the 64-m antennas were increased to 70-m. In order to evaluate the minimum film thickness of the hydrostatic bearing which supports the antenna weight, it is first necessary to have a good estimation of the maximum operational load on the most heavily loaded bearing pad. The maximum hydrostatic bearing load is shown to be sufficiently small and the ratios of stabilizing to over turning moments are ample.

Estimation of the Mean Axon Diameter and Intra-axonal Space Volume Fraction of the Human Corpus Callosum: Diffusion q-space Imaging with Low q-values.

PubMed

Suzuki, Yuriko; Hori, Masaaki; Kamiya, Kouhei; Fukunaga, Issei; Aoki, Shigeki; VAN Cauteren, Marc

2016-01-01

Q-space imaging (QSI) is a diffusion-weighted imaging (DWI) technique that enables investigation of tissue microstructure. However, for sufficient displacement resolution to measure the microstructure, QSI requires high q-values that are usually difficult to achieve with a clinical scanner. The recently introduced "low q-value method" fits the echo attenuation to only low q-values to extract the root mean square displacement. We investigated the clinical feasibility of the low q-value method for estimating the microstructure of the human corpus callosum using a 3.0-tesla clinical scanner within a clinically feasible scan time. We performed a simulation to explore the acceptable range of maximum q-values for the low q-value method. We simulated echo attenuations caused by restricted diffusion in the intra-axonal space (IAS) and hindered diffusion in the extra-axonal space (EAS) assuming 100,000 cylinders with various diameters, and we estimated mean axon diameter, IAS volume fraction, and EAS diffusivity by fitting echo attenuations with different maximum q-values. Furthermore, we scanned the corpus callosum of 7 healthy volunteers and estimated the mean axon diameter and IAS volume fraction. Good agreement between estimated and defined values in the simulation study with maximum q-values of 700 and 800 cm(-1) suggested that the maximum q-value used in the in vivo experiment, 737 cm(-1), was reasonable. In the in vivo experiment, the mean axon diameter was larger in the body of the corpus callosum and smaller in the genu and splenium, and this anterior-to-posterior trend is consistent with previously reported histology, although our mean axon diameter seems larger in size. On the other hand, we found an opposite anterior-to-posterior trend, with high IAS volume fraction in the genu and splenium and a lower fraction in the body, which is similar to the fiber density reported in the histology study. The low q-value method may provide insights into tissue microstructure using a 3T clinical scanner within clinically feasible scan time.

Generate an Optimum Lightweight Legs Structure Design Based on Critical Posture in A-FLoW Humanoid Robot

NASA Astrophysics Data System (ADS)

Luthfi, A.; Subhan, K. A.; Eko H, B.; Sanggar, D. R.; Pramadihanto, D.

2018-04-01

Lightweight construction and energy efficiency play an important role in humanoid robot development. The application of computer-aided engineering (CAE) in the development process is one of the possibilities to achieve the appropriate reduction of the weight. This paper describes a method to generate an optimum lightweight legs structure design based on critical posture during walking locomotion in A-FLoW Humanoid robot.The criticalposture can be obtained from the highest forces and moments in each joint of the robot body during walking locomotion. From the finite element analysis (FEA) result can be realized leg structure design of A-FLoW humanoid robot with a maximum displacement value of 0.05 mmand weight reduction about 0.598 Kg from the thigh structure and a maximum displacement value of 0,13 mmand weight reduction about 0.57 kg from the shin structure.

Solubility relations in the ternary system NaCl-CsCl-H2O at 1 atm. 1. Solubilities of halite from 20 to 100 °C

USGS Publications Warehouse

Chou, I.-Ming; Lee, R.D.

1983-01-01

Solubilities of halite in the ternary system NaCl-CsCl-H2O have been determined by the visual polythermal method at 1 atm from 20 to 100??C along five constant CsCl/(CsCl + H2O) weight ratio lines. These five constant weight ratios are 0.1, 0.2, 0.3, 0.4, and 0.5. The maximum uncertainties in these measurements are ??0.02 wt % NaCl and ??0.15??C. The data along each constant CsCl/(CsCl + H2O) weight ratio line were regressed to a smooth curve. The maximum deviation of the measured solubilities from the smooth curves is 0.06 wt % NaCl. Isothermal solubilities of halite were calculated from smoothed curves at 25, 50, and 75??C.

Design studies of continuously variable transmissions for electric vehicles

NASA Technical Reports Server (NTRS)

Parker, R. J.; Loewenthal, S. H.; Fischer, G. K.

1981-01-01

Preliminary design studies were performed on four continuously variable transmission (CVT) concepts for use with a flywheel equipped electric vehicle of 1700 kg gross weight. Requirements of the CVT's were a maximum torque of 450 N-m (330 lb-ft), a maximum output power of 75 kW (100 hp), and a flywheel speed range of 28,000 to 14,000 rpm. Efficiency, size, weight, cost, reliability, maintainability, and controls were evaluated for each of the four concepts which included a steel V-belt type, a flat rubber belt type, a toroidal traction type, and a cone roller traction type. All CVT's exhibited relatively high calculated efficiencies (68 percent to 97 percent) over a broad range of vehicle operating conditions. Estimated weight and size of these transmissions were comparable to or less than equivalent automatic transmission. The design of each concept was carried through the design layout stage.

Neuromuscular fatigue and tibiofemoral joint biomechanics when transitioning from non-weight bearing to weight bearing.

PubMed

Schmitz, Randy J; Kim, Hyunsoo; Shultz, Sandra J

2015-01-01

Fatigue is suggested to be a risk factor for anterior cruciate ligament injury. Fatiguing exercise can affect neuromuscular control and laxity of the knee joint, which may render the knee less able to resist externally applied loads. Few authors have examined the effects of fatiguing exercise on knee biomechanics during the in vivo transition of the knee from non-weight bearing to weight bearing, the time when anterior cruciate ligament injury likely occurs. To investigate the effect of fatiguing exercise on tibiofemoral joint biomechanics during the transition from non-weight bearing to early weight bearing. Cross-sectional study. Research laboratory. Ten participants (5 men and 5 women; age = 25.3 ± 4.0 years) with no previous history of knee-ligament injury to the dominant leg. Participants were tested before (preexercise) and after (postexercise) a protocol consisting of repeated leg presses (15 repetitions from 10°-40° of knee flexion, 10 seconds' rest) against a 60% body-weight load until they were unable to complete a full bout of repetitions. Electromagnetic sensors measured anterior tibial translation and knee-flexion excursion during the application of a 40% body-weight axial compressive load to the bottom of the foot, simulating weight acceptance. A force transducer recorded axial compressive force. The axial compressive force (351.8 ± 44.3 N versus 374.0 ± 47.9 N; P = .018), knee-flexion excursion (8.0° ± 4.0° versus 10.2° ± 3.7°; P = .046), and anterior tibial translation (6.7 ± 1.7 mm versus 8.2 ± 1.9 mm; P < .001) increased from preexercise to postexercise. No significant correlations were noted. Neuromuscular fatigue may impair initial knee-joint stabilization during weight acceptance, leading to greater accessory motion at the knee and the potential for greater anterior cruciate ligament loading.

Kangaroo mother care for low birth weight infants: a randomized controlled trial.

PubMed

Suman, Rao P N; Udani, Rekha; Nanavati, Ruchi

2008-01-01

To compare the effect of Kangaroo mother care (KMC) and conventional methods of care (CMC) on growth in LBW babies (> 2000 g). Randomized controlled trial. Level III NICU of a teaching institution in western India. 206 neonates with birth weight < 2000 g. The subjects were randomized into two groups: the intervention group (KMC-103) received Kangaroo mother care. The control group (CMC: 103) received conventional care. Growth, as measured by average daily weight gain and by other anthropometrical parameters at 40 weeks postmenstrual age in preterm babies and at 2500 g in term SGA infants was assessed. The KMC babies had better average weight gain per day (KMC: 23.99 g vs CMC: 15.58 g, P< 0.0001). The weekly increments in head circumference (KMC: 0.75 cm vs CMC: 0.49 cm, P = 0.02) and length (KMC: 0.99 cm vs CMC: 0.7 cm, P = 0.008) were higher in the KMC group. A significantly higher number of babies in the CMC group suffered from hypothermia, hypoglycemia, and sepsis. There was no effect on time to discharge. More KMC babies were exclusively breastfed at the end of the study (98% vs 76%). KMC was acceptable to most mothers and families at home. Kangaroo mother care improves growth and reduces morbidities in low birth weight infants. It is simple, acceptable to mothers and can be continued at home.

Child Health in Peru: Importance of Regional Variation and Community Effects on Children's Height and Weight

ERIC Educational Resources Information Center

Shin, Heeju

2007-01-01

In developing countries, height and weight are good indicators of children's health and nutritional status. Maternal education has been accepted as one of the most important influences on child health. Using the 2000 Demographic and Health Survey of Peru, however, I find that the effect of maternal education varies as a function of region. In the…

Evaluation of Child Health Matters: A Web-Based Tutorial to Enhance School Nurses' Communications with Families about Weight-Related Health

ERIC Educational Resources Information Center

Steele, Ric G.; Wu, Yelena P.; Cushing, Christopher C.; Jensen, Chad D.

2013-01-01

The goal of the current study was to assess the efficacy and acceptability of a web-based tutorial (Child Health Matters, CHM) designed to improve school nurses' communications with families about pediatric weight-related health issues. Using a randomized wait-list control design, a nationally representative sample of school nurses was assigned to…

Solar maximum mission panel jettison analysis remote manipulator system

NASA Technical Reports Server (NTRS)

Bauer, R. B.

1980-01-01

A study is presented of the development of the Remote Manipulator System (RMS) configurations for jettison of the solar panels on the Solar Maximum Mission/Multimission Satellite. A valid RMS maneuver between jettison configurations was developed. Arm and longeron loads and effector excursions due to the solar panel jettison were determined to see if they were within acceptable limits. These loads and end effector excursions were analyzed under two RMS modes, servos active in position hold submode, and in the brakes on mode.

Using age on clothes size label to estimate weight in emergency paediatric patients.

PubMed

Elgie, Laura D; Williams, Andrew R

2012-10-01

To study formulae that estimate children's weight using their actual age. To determine whether using the age on their clothes size label in these formulae can estimate weight when their actual age is unknown. The actual age and age on the clothes labels of 188 children were inserted into formulae that estimate children's weight. These estimates were compared with their actual weight. Bland-Altman plots calculated the precision and accuracy of each of these estimates. In all formulae, using age on the clothes sizes label provided a more precise estimate than the child's actual age. In emergencies where a child's age is unknown, use of the age on their clothes label in weight-estimating formulae yields acceptable weight estimates. Even in situations where a child's age is known, the age on their clothes label may provide a more accurate and precise weight estimate than the actual age.

Return on Investment: Ensuring Special Forces Can Fight Another Day

DTIC Science & Technology

2011-12-01

maximum recommended protein intake, even for weight training and bodybuilding. Most non- vegetarian athletes take in more than this in their normal... diet . 5. Limit fat intake to less than 30% of total calories (1 gram of fat = 9 calories0. Items to watch are red meat, peanuts, solid dairy...cereal products every day. 9. Sort-term weight reduction diets are generally useless and occasionally dangerous. Lasting weight modification is

Graphs and matroids weighted in a bounded incline algebra.

PubMed

Lu, Ling-Xia; Zhang, Bei

2014-01-01

Firstly, for a graph weighted in a bounded incline algebra (or called a dioid), a longest path problem (LPP, for short) is presented, which can be considered the uniform approach to the famous shortest path problem, the widest path problem, and the most reliable path problem. The solutions for LPP and related algorithms are given. Secondly, for a matroid weighted in a linear matroid, the maximum independent set problem is studied.

PROP taster status interacts with the built environment to influence children's food acceptance and body weight status.

PubMed

Burd, Carlye; Senerat, Araliya; Chambers, Earle; Keller, Kathleen L

2013-04-01

Eating behaviors and obesity are complex phenotypes influenced by genes and the environment, but few studies have investigated the interaction of these two variables. The purpose of this study was to use a gene-environment interaction model to test for differences in children's food acceptance and body weights. Inherited ability to taste 6-n-propylthiouracil (PROP) was assessed as a marker of oral taste responsiveness. Food environment was classified as "healthy" or "unhealthy" based on proximity to outlets that sell fruits/vegetables and fast foods using Geographic Information Systems (GIS). The cohort consisted of 120 children, ages 4-6 years, recruited from New York City over 2005-2010. Home address and other demographic variables were reported by parents and PROP status, food acceptance, and anthropometrics were assessed in the laboratory. Based on a screening test, children were classified as PROP tasters or non-tasters. Hierarchical linear models analysis of variance was performed to examine differences in food acceptance and body mass index (BMI) z-scores as a function of PROP status, the food environment ("healthy" vs. "unhealthy"), and their interaction. Results showed an interaction between taster status and the food environment on BMI z-score and food acceptance. Non-taster children living in healthy food environments had greater acceptance of vegetables than taster children living in healthy food environments (P ≤ 0.005). Moreover, non-tasters from unhealthy food environments had higher BMI z-scores than all other groups (P ≤ 0.005). Incorporating genetic markers of taste into studies that assess the built environment may improve the ability of these measures to predict risk for obesity and eating behaviors. Copyright © 2012 The Obesity Society.

PROP taster status interacts with the built environment to influence children's food acceptance and body weight status

PubMed Central

Burd, Carlye; Senerat, Araliya; Chambers, Earle; Keller, Kathleen L.

2012-01-01

Eating behaviors and obesity are complex phenotypes influenced by genes and access to foods in the environment, but few studies have investigated the interaction of these two variables. The purpose of this study was to use a gene-environment interaction model to test for differences in children's food acceptance and body weights. Inherited ability to taste 6-n-propylthiouracil (PROP) was assessed as a marker of oral taste responsiveness. Food environment was classified as “healthy” or “unhealthy” based on proximity to outlets that sell fruits/vegetables and fast foods using Geographic Information Systems (GIS). The cohort consisted of 120 children, ages 4–6 years, recruited from New York City over 2005–2010. Home address and other demographic variables were reported by parents and PROP status, food acceptance, and anthropometrics were assessed in the laboratory. Based on a screening test, children were classified as PROP tasters or non-tasters. Hierarchical linear models analysis of variance was performed to examine differences in food acceptance and body mass index (BMI) z-scores as a function of PROP status, the food environment (“healthy” vs. “unhealthy”), and their interaction. Results showed an interaction between taster status and the food environment on BMI z-score and food acceptance. Non-taster children living in healthy food environments had greater acceptance of vegetables than taster children living in healthy food environments (p≤0.005). Moreover, non-tasters from unhealthy food environments had higher BMI z-scores than all other groups (p≤0.005). Incorporating genetic markers of taste into studies that assess the built environment may improve the ability of these measures to predict risk for obesity and eating behaviors. PMID:23401219

Optimization of radiation treatment of ginger ( Zingiber officinale) rhizomes using response surface methodology

NASA Astrophysics Data System (ADS)

Nketsia-Tabiri, Josephine

1998-06-01

The effects of pre-irradiation storage time (7-21 days), radiation dose (0-75 Gy) and post-irradiation storage time (2-20 weeks) on sprouting, wrinkling and weight loss of ginger was investigated using a central composite rotatable design. Predictive models developed for all three responses were highly significant. Weight loss and wrinkling decreased as pre-irradiation storage time increased. Dose and post-irradiation storage time had significant interactive effects on weight loss and sprouting. Processing conditions for achieving minimal sprouting resulted in maximum weight loss and wrinkling.

Development of an Internet/Population-Based Weight Management Program for the U.S. Army

PubMed Central

Stewart, Tiffany; May, Sandra; Allen, H. Raymond; Bathalon, Col. Gaston P.; Lavergne, Guy; Sigrist, Lori; Ryan, Donna; Williamson, Donald A.

2008-01-01

A significant number of Army soldiers are sufficiently overweight to exceed the maximum weight allowances defined by the Army weight control program (AR600-9). Also, the body weights of a substantial number of soldiers approach the maximum weight allowances. These soldiers should not gain additional weight if they are to meet Army weight allowances. The conventional approach to this overweight problem is assigning soldiers to remedial physical training and mandatory referral for nutrition counseling by a health care provider. An alternative to this conventional approach is to target the entire population of soldiers (population-based intervention) to promote weight loss in overweight soldiers and weight gain prevention in soldiers who are approaching overweight status. To accomplish this objective, the Healthy Eating, Activity, and Lifestyle Training Headquarters (H.E.A.L.T.H.) program was developed. This article describes the rationale for developing the program, the components of the program, and the utilization promotion strategies of the program. The H.E.A.L.T.H. program includes two primary components: (1) a Web site tailored to the standards established in Field Manual 21-20, Physical Fitness Training, Army physical fitness test, and AR600-9, the army weight control program, and (2) a health promotion program designed to promote awareness of the H.E.A.L.T.H. Web site and to facilitate use of the Web site by soldiers and their family members. The Web site is equipped with personalized planning tools and progress tracking over time related to fitness, caloric intake, and lifestyle behavior change goals. The health promotion program includes media advertisements and “ground roots” efforts to facilitate use by soldiers. PMID:19885186

Total phenolic content, consumer acceptance, and instrumental analysis of bread made with grape seed flour.

PubMed

Hoye, Clifford; Ross, Carolyn F

2011-09-01

Grape seed flour (GSF) from grape pomace, a waste product generated during winemaking, was explored for use in bread production due to its potential health benefits. This study evaluated the consumer acceptance and physical properties of bread, including total phenolic content (TPC), made with varying levels of GSF. Dough and breads were prepared using different levels of replacement of hard red spring wheat flour (HRS) with GSF (0 to 10 g GSF/100 g HRS) and stored for 0, 2, or 6 wk at -20 °C. Replacement of 10 g GSF/100 g HRS increased the bread TPC from 0.064 mg tannic acid/g dry weight to 4.25 mg tannic acid/g dry weight. Consumer acceptance and instrumental analyses were used to investigate changes in sensory and texture properties due to GSF replacement. Replacement above 5 g GSF/100 g HRS decreased the loaf brightness and volume, with an increase in the bread hardness and porosity. Generally, breads containing ≥ 7.5 g GSF/100 g HRS were characterized by lower consumer acceptance. A reduction in overall and bitterness acceptance was observed in bread at 10 g GSF/100 g HRS, with decreased acceptance of astringency and sweetness at 7.5 and 10 g GSF/100 g HRS. Based on these results, the replacement of 5 g GSF/100 g HRS is recommended for the production of fortified breads with acceptable physical and sensory properties and high TPC activity compared to refined bread. This study shows that grape seed flour (GSF) can be used to replace hard red spring wheat flour (HRS) in bread production, with moderate impact on the physical and sensory properties of the bread. Replacement of up to 10 g GSF/100 g HRS significantly decreased overall consumer acceptance of the bread, with lower consumer acceptance of sweetness and astringency at 7.5 and 10 g GSF/100 g HRS. Thus, a replacement value of 5 g GSF/100 g HRS is recommended for the production of fortified breads. © 2011 Institute of Food Technologists®

Cascadia Subduction Zone

USGS Publications Warehouse

Frankel, Arthur D.; Petersen, Mark D.

2008-01-01

The geometry and recurrence times of large earthquakes associated with the Cascadia Subduction Zone (CSZ) were discussed and debated at a March 28-29, 2006 Pacific Northwest workshop for the USGS National Seismic Hazard Maps. The CSZ is modeled from Cape Mendocino in California to Vancouver Island in British Columbia. We include the same geometry and weighting scheme as was used in the 2002 model (Frankel and others, 2002) based on thermal constraints (Fig. 1; Fluck and others, 1997 and a reexamination by Wang et al., 2003, Fig. 11, eastern edge of intermediate shading). This scheme includes four possibilities for the lower (eastern) limit of seismic rupture: the base of elastic zone (weight 0.1), the base of transition zone (weight 0.2), the midpoint of the transition zone (weight 0.2), and a model with a long north-south segment at 123.8? W in the southern and central portions of the CSZ, with a dogleg to the northwest in the northern portion of the zone (weight 0.5). The latter model was derived from the approximate average longitude of the contour of the 30 km depth of the CSZ as modeled by Fluck et al. (1997). A global study of the maximum depth of thrust earthquakes on subduction zones by Tichelaar and Ruff (1993) indicated maximum depths of about 40 km for most of the subduction zones studied, although the Mexican subduction zone had a maximum depth of about 25 km (R. LaForge, pers. comm., 2006). The recent inversion of GPS data by McCaffrey et al. (2007) shows a significant amount of coupling (a coupling factor of 0.2-0.3) as far east as 123.8? West in some portions of the CSZ. Both of these lines of evidence lend support to the model with a north-south segment at 123.8? W.

Effects of Weight Loss on Acoustic Parameters After Bariatric Surgery.

PubMed

de Souza, Lourdes Bernadete Rocha; Dos Santos, Marquiony Marques; Pernambuco, Leandro Araújo; de Almeida Godoy, Cynthia Meira; da Silva Lima, Deysianne Meire

2018-05-01

Patients with morbid obesity may present vocal alterations, since large accumulation of fat in the vocal tract may interfere with voice production of these individuals. Verify the neck circumference and the acoustic parameters of voice in obese women, before and after the bariatric surgery, and compare the results with a control group, with normal weight. Observational, longitudinal, descriptive study with patients referred to the SCODE (Obesity Surgery and Related Disorders Center) in a university hospital. The sample consisted of 25 morbidly obese women, age range 28-43 years and 23 non-obese women, aged 21-41 years control group. To measure the neck circumference, a tape measure was used and all participants were seated upright with the head positioned in the Frankfort horizontal plane. The fundamental frequency was calculated through the sustained emission of vowel [a] at usual intensity and pitch, to measure the fundamental frequency of the voice, that is, how much the vocal fold vibrates per second. After the recording, participants were prompted to produce vowels [a], [i], and [u] sustained at usual intensity and pitch, and a stopwatch was used to measure the maximum phonation time, to verify the balance between myoelastic and dynamic forces of the larynx. After 8 months post-surgery, the patients were recruited to be re-evaluated using the same pre-surgical data collection procedures. There was an increase in the mean value of f0. The maximum phonation time of all vowels increased after surgery. Obese individuals with post-surgery weight loss may present neck circumference, fundamental frequency, and maximum phonation time values closer to the mean values of normal weight individuals. In this study, weight loss was sufficient to adjust the acoustic parameter measurements.

In vivo Loads in the Lumbar L3-4 Disc during a Weight Lifting Extension

PubMed Central

Wang, Shaobai; Park, Won Man; Kim, Yoon Hyuk; Cha, Thomas; Wood, Kirkham; Li, Guoan

2014-01-01

Background Knowledge of in vivo human lumbar loading is critical for understanding the lumbar function and for improving surgical treatments of lumbar pathology. Although numerous experimental measurements and computational simulations have been reported, non-invasive determination of in vivo spinal disc loads is still a challenge in biomedical engineering. The object of the study is to investigate the in vivo human lumbar disc loads using a subject-specific and kinematic driven finite element approach. Methods Three dimensional (3D) lumbar spine models of three living subjects were created using MR images. A 3D finite element model of the L3-4 disc, including the annulus fibrosus and nucleus pulposus, was built for each subject. The endplate kinematics of the L3-4 segment of each subject during a dynamic weight lifting extension was determined using a dual fluoroscopic imaging technique. The endplate kinematics was used as displacement boundary conditions of the subject specific finite element model of the L3-4 disc to calculate the in-vivo disc forces and moments during the weight lifting activity. Findings During the weight lifting extension, the L3-4 disc experienced maximum shear load of about 230 N or 0.34 bodyweight at the flexion position and maximum compressive load of 1500 N or 2.28 bodyweight at the upright position. The disc experienced a primary flexion-extension moment during the motion which reached a maximum of 4.2 Nm at upright position with stretched arms holding the weight. Interpretation This study provided quantitative data on in vivo disc loading that could help understand intrinsic biomechanics of the spine and improve surgical treatment of pathological discs using fusion or arthroplasty techniques. PMID:24345591

[Motivation for weight loss among weight loss treatment participants].

PubMed

Czeglédi, Edit

2017-12-01

Unrealistic expectations about weight goal and about weight loss-related benefits can hinder the effort for a successful long-term weight control. To explore weight loss-related goals and their background among overweight/obese patients. Study sample consisted of patients who participated in the inpatient weight loss treatment in the Lipidological Department of Szent Imre Hospital (n = 339, 19% men). Mean age: 50.2 years (SD = 13.47 years), mean BMI: 38.6 (SD = 7.58). self-reported anthropometric data, type and number of treated illnesses, Goals and Relative Weights Questionnaire, Motivations for Weight Loss Scale, Body Shape Questionnaire. Participants would feel disappointed with a possible 10% weight loss in a half-year time span. The acceptable weight loss percentage was higher among women, younger participants and among those who had more excess weight. Motivation regarding the increase in social desirability by weight loss is in association with body dissatisfaction, health related motivation is in association with the number of treated illnesses. Our results are contributing to the understanding of motivational factors behind weight reduction efforts, considering these can improve treatment success rates. Orv Hetil. 2017; 158(49): 1960-1967.

14 CFR 91.323 - Increased maximum certificated weights for certain airplanes operated in Alaska.

Code of Federal Regulations, 2013 CFR

2013-01-01

... certain airplanes operated in Alaska. 91.323 Section 91.323 Aeronautics and Space FEDERAL AVIATION... certain airplanes operated in Alaska. (a) Notwithstanding any other provision of the Federal Aviation... certificated weight of an airplane type certificated under Aeronautics Bulletin No. 7-A of the U.S. Department...

14 CFR 91.323 - Increased maximum certificated weights for certain airplanes operated in Alaska.

Code of Federal Regulations, 2011 CFR

2011-01-01

... certain airplanes operated in Alaska. 91.323 Section 91.323 Aeronautics and Space FEDERAL AVIATION... certain airplanes operated in Alaska. (a) Notwithstanding any other provision of the Federal Aviation... certificated weight of an airplane type certificated under Aeronautics Bulletin No. 7-A of the U.S. Department...

14 CFR 91.323 - Increased maximum certificated weights for certain airplanes operated in Alaska.

Code of Federal Regulations, 2012 CFR

2012-01-01

... certain airplanes operated in Alaska. 91.323 Section 91.323 Aeronautics and Space FEDERAL AVIATION... certain airplanes operated in Alaska. (a) Notwithstanding any other provision of the Federal Aviation... certificated weight of an airplane type certificated under Aeronautics Bulletin No. 7-A of the U.S. Department...

14 CFR 91.323 - Increased maximum certificated weights for certain airplanes operated in Alaska.

Code of Federal Regulations, 2014 CFR

2014-01-01

... certain airplanes operated in Alaska. 91.323 Section 91.323 Aeronautics and Space FEDERAL AVIATION... certain airplanes operated in Alaska. (a) Notwithstanding any other provision of the Federal Aviation... certificated weight of an airplane type certificated under Aeronautics Bulletin No. 7-A of the U.S. Department...

14 CFR 91.323 - Increased maximum certificated weights for certain airplanes operated in Alaska.

Code of Federal Regulations, 2010 CFR

2010-01-01

... certain airplanes operated in Alaska. 91.323 Section 91.323 Aeronautics and Space FEDERAL AVIATION... certain airplanes operated in Alaska. (a) Notwithstanding any other provision of the Federal Aviation... certificated weight of an airplane type certificated under Aeronautics Bulletin No. 7-A of the U.S. Department...

21 CFR 172.260 - Oxidized polyethylene.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION Coatings, Films and Related Substances... average molecular weight of 1,200, as determined by high temperature vapor pressure osmometry; contains a maximum of 5 percent by weight of total oxygen; and has an acid value of 9 to 19. (b) The additive is used...

21 CFR 177.2550 - Reverse osmosis membranes.

Code of Federal Regulations, 2011 CFR

2011-04-01

... is on the food-contact surface, and its maximum weight is 62 milligrams per square decimeter (4 milligrams per square inch) as a thin film composite on a suitable support. (2) A cross-linked polyetheramine... weight is 4.7 milligrams per square decimeter (0.3 milligrams per square inch) as a thin film composite...

21 CFR 177.2550 - Reverse osmosis membranes.

Code of Federal Regulations, 2013 CFR

2013-04-01

... is on the food-contact surface, and its maximum weight is 62 milligrams per square decimeter (4 milligrams per square inch) as a thin film composite on a suitable support. (2) A cross-linked polyetheramine... weight is 4.7 milligrams per square decimeter (0.3 milligrams per square inch) as a thin film composite...

21 CFR 177.2550 - Reverse osmosis membranes.

Code of Federal Regulations, 2010 CFR

2010-04-01

... is on the food-contact surface, and its maximum weight is 62 milligrams per square decimeter (4 milligrams per square inch) as a thin film composite on a suitable support. (2) A cross-linked polyetheramine... weight is 4.7 milligrams per square decimeter (0.3 milligrams per square inch) as a thin film composite...

21 CFR 177.2550 - Reverse osmosis membranes.

Code of Federal Regulations, 2012 CFR

2012-04-01

... is on the food-contact surface, and its maximum weight is 62 milligrams per square decimeter (4 milligrams per square inch) as a thin film composite on a suitable support. (2) A cross-linked polyetheramine... weight is 4.7 milligrams per square decimeter (0.3 milligrams per square inch) as a thin film composite...

14 CFR 27.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

14 CFR 27.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

14 CFR 27.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

14 CFR 29.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

14 CFR 27.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

14 CFR 29.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

14 CFR 29.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

14 CFR 29.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

14 CFR 27.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

14 CFR 29.175 - Demonstration of static longitudinal stability.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Critical center of gravity; (3) Maximum continuous power; (4) The landing gear retracted; and (5) The... kt, with— (1) Critical weight; (2) Critical center of gravity; (3) Power for level flight at 0.8 VNE... − 20 kt to VNE with— (1) Critical weight; (2) Critical center of gravity; (3) Power required for level...

78 FR 7770 - Boyce Hydro Power, LLC; Notice of Application Accepted for Filing, Soliciting Motions To...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

.... Description of Application: The licensee proposes to replace one of the project's three existing turbine/generator units with a new unit. The project's maximum hydraulic capacity would remain the same but the new...

An Alternative Derivation of the Energy Levels of the "Particle on a Ring" System

NASA Astrophysics Data System (ADS)

Vincent, Alan

1996-10-01

All acceptable wave functions must be continuous mathematical functions. This criterion limits the acceptable functions for a particle in a linear 1-dimensional box to sine functions. If, however, the linear box is bent round into a ring, acceptable wave functions are those which are continuous at the 'join'. On this model some acceptable linear functions become unacceptable for the ring and some unacceptable cosine functions become acceptable. This approach can be used to produce a straightforward derivation of the energy levels and wave functions of the particle on a ring. These simple wave mechanical systems can be used as models of linear and cyclic delocalised systems such as conjugated hydrocarbons or the benzene ring. The promotion energy of an electron can then be used to calculate the wavelength of absorption of uv light. The simple model gives results of the correct order of magnitude and shows that, as the chain length increases, the uv maximum moves to longer wavelengths, as found experimentally.

Setting research priorities to reduce global mortality from preterm birth and low birth weight by 2015.

PubMed

Bahl, Rajiv; Martines, Jose; Bhandari, Nita; Biloglav, Zrinka; Edmond, Karen; Iyengar, Sharad; Kramer, Michael; Lawn, Joy E; Manandhar, D S; Mori, Rintaro; Rasmussen, Kathleen M; Sachdev, H P S; Singhal, Nalini; Tomlinson, Mark; Victora, Cesar; Williams, Anthony F; Chan, Kit Yee; Rudan, Igor

2012-06-01

This paper aims to identify health research priorities that could improve the rate of progress in reducing global neonatal mortality from preterm birth and low birth weight (PB/LBW), as set out in the UN's Millennium Development Goal 4. We applied the Child Health and Nutrition Research Initiative (CHNRI) methodology for setting priorities in health research investments. In the process coordinated by the World Health Organization in 2007-2008, 21 researchers with interest in child, maternal and newborn health suggested 82 research ideas that spanned across the broad spectrum of epidemiological research, health policy and systems research, improvement of existing interventions and development of new interventions. The 82 research questions were then assessed for answerability, effectiveness, deliverability, maximum potential for mortality reduction and the effect on equity using the CHNRI method. The top 10 identified research priorities were dominated by health systems and policy research questions (eg, identification of LBW infants born at home within 24-48 hours of birth for additional care; approaches to improve quality of care of LBW infants in health facilities; identification of barriers to optimal home care practices including care seeking; and approaches to increase the use of antenatal corticosteriods in preterm labor and to improve access to hospital care for LBW infants). These were followed by priorities for improvement of the existing interventions (eg, early initiation of breastfeeding, including feeding mode and techniques for those unable to suckle directly from the breast; improved cord care, such as chlorhexidine application; and alternative methods to Kangaroo Mother Care (KMC) to keep LBW infants warm in community settings). The highest-ranked epidemiological question suggested improving criteria for identifying LBW infants who need to be cared for in a hospital. Among the new interventions, the greatest support was shown for the development of new simple and effective interventions for providing thermal care to LBW infants, if KMC is not acceptable to the mother. The context for this exercise was set within the MDG4, requiring an urgent and rapid progress in mortality reduction from low birth weight, rather than identifying long-term strategic solutions of the greatest potential. In a short-term context, the health policy and systems research to improve access and coverage by the existing interventions, coupled with further research to improve effectiveness, deliverability and acceptance of existing interventions, and epidemiological research to address the key gaps in knowledge, were all highlighted as research priorities.

TH-AB-BRA-04: Dosimetric Evaluation of MR-Guided HDR Brachytherapy Planning for Cervical Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kamio, Y; Barkati, M; Beliveau-Nadeau, D

2016-06-15

Purpose: To perform a retrospective study on 16 patients that had both CT and T2-weighted MR scans done at first fraction using the Utrecht CT/MR applicator (Elekta Brachytherapy) in order to evaluate uncertainties associated with an MR-only planning workflow. Methods: MR-workflow uncertainties were classified in three categories: reconstruction, registration and contouring. A systematic comparison of the CT and MR contouring, manual reconstruction and optimization process was performed to evaluate the impact of these uncertainties on the recommended GEC ESTRO DVH parameters: D90% and V100% for HR-CTV as well as D2cc for bladder, rectum, sigmoid colon and small bowel. This comparisonmore » was done using the following four steps: 1. Catheter reconstruction done on MR images with original CT-plan contours and dwell times. 2. OAR contours adjusted on MR images with original CT-plan reconstruction and dwell times. 3. Both reconstruction and contours done on MR images with original CT-plan dwell times. 4. Entire MR-based workflow optimized dwell times reimported to the original CT-plan. Results: The MR-based reconstruction process showed average D2cc deviations of 4.5 ± 3.0%, 1.5 ± 2.0%, 2.5 ± 2.0% and 2.0 ± 1.0% for the bladder, rectum, sigmoid colon and small bowels respectively with a maximum of 10%, 6%, 6% and 4%. The HR-CTV’s D90% and V100% average deviations was found to be 4.0 ± 3.0%, and 2.0 ± 2.0% respectively with a maximum of 10% and 6%. Adjusting contours on MR-images was found to have a similar impact. Finally, the optimized MR-based workflow dwell times were found to still give acceptable plans when re-imported to the original CT-plan which validated the entire workflow. Conclusion: This work illustrates a systematic validation method for centers wanting to move towards an MR-only workflow. This work will be expanded to model based reconstruction, PD-weighted images and other types of applicators.« less

What is the best method to fit time-resolved data? A comparison of the residual minimization and the maximum likelihood techniques as applied to experimental time-correlated, single-photon counting data

DOE PAGES

Santra, Kalyan; Zhan, Jinchun; Song, Xueyu; ...

2016-02-10

The need for measuring fluorescence lifetimes of species in subdiffraction-limited volumes in, for example, stimulated emission depletion (STED) microscopy, entails the dual challenge of probing a small number of fluorophores and fitting the concomitant sparse data set to the appropriate excited-state decay function. This need has stimulated a further investigation into the relative merits of two fitting techniques commonly referred to as “residual minimization” (RM) and “maximum likelihood” (ML). Fluorescence decays of the well-characterized standard, rose bengal in methanol at room temperature (530 ± 10 ps), were acquired in a set of five experiments in which the total number ofmore » “photon counts” was approximately 20, 200, 1000, 3000, and 6000 and there were about 2–200 counts at the maxima of the respective decays. Each set of experiments was repeated 50 times to generate the appropriate statistics. Each of the 250 data sets was analyzed by ML and two different RM methods (differing in the weighting of residuals) using in-house routines and compared with a frequently used commercial RM routine. Convolution with a real instrument response function was always included in the fitting. While RM using Pearson’s weighting of residuals can recover the correct mean result with a total number of counts of 1000 or more, ML distinguishes itself by yielding, in all cases, the same mean lifetime within 2% of the accepted value. For 200 total counts and greater, ML always provides a standard deviation of <10% of the mean lifetime, and even at 20 total counts there is only 20% error in the mean lifetime. Here, the robustness of ML advocates its use for sparse data sets such as those acquired in some subdiffraction-limited microscopies, such as STED, and, more importantly, provides greater motivation for exploiting the time-resolved capacities of this technique to acquire and analyze fluorescence lifetime data.« less

Determination of pressure drop across activated carbon fiber respirator cartridges.

PubMed

Balanay, Jo Anne G; Lungu, Claudiu T

2016-01-01

Activated carbon fiber (ACF) is considered as an alternative adsorbent to granular activated carbon (GAC) for the development of thinner, lighter, and efficient respirators because of their larger surface area and adsorption capacities, thinner critical bed depth, lighter weight, and fabric form. This study aims to measure the pressure drop across different types of commercially available ACFs in respirator cartridges to determine the ACF composition and density that will result in acceptably breathable respirators. Seven ACF types in cloth (ACFC) and felt (ACFF) forms were tested. ACFs in cartridges were challenged with pre-conditioned constant air flow (43 LPM, 23°C, 50% RH) at different compositions (single- or combination-ACF type) in a test chamber. Pressure drop across ACF cartridges were obtained using a micromanometer, and compared among different cartridge configurations, to those of the GAC cartridge, and to the NIOSH breathing resistance requirements for respirator cartridges. Single-ACF type cartridges filled with any ACFF had pressure drop measurements (23.71-39.93 mmH2O) within the NIOSH inhalation resistance requirement of 40 mmH2O, while those of the ACFC cartridges (85.47±3.67 mmH2O) exceeded twice the limit due possibly to the denser weaving of ACFC fibers. All single ACFF-type cartridges had higher pressure drop compared to the GAC cartridge (23.13±1.14 mmH2O). Certain ACF combinations (2 ACFF or ACFC/ACFF types) resulted to pressure drop (26.39-32.81 mmH2O) below the NIOSH limit. All single-ACFF type and all combination-ACF type cartridges with acceptable pressure drop had much lower adsorbent weights than GAC (≤15.2% of GAC weight), showing potential for light-weight respirator cartridges. 100% ACFC in cartridges may result to respirators with high breathing resistance and, thus, is not recommended. The more dense ACFF and ACFC types may still be possibly used in respirators by combining them with less dense ACFF materials and/or by reducing cartridge bed depth to reduce pressure drop to acceptable levels. ACFF by itself may be more appropriate as adsorbent materials in ACF respirator cartridges in terms of acceptable breathing resistance.

Vehicle Maximum Weight Limitation Based on Intelligent Weight Sensor

NASA Astrophysics Data System (ADS)

Raihan, W.; Tessar, R. M.; Ernest, C. O. S.; E Byan, W. R.; Winda, A.

2017-03-01

Vehicle weight is an important factor to be maintained for transportation safety. A weight limitation system is proposed to make sure the vehicle weight is always below its designation prior the vehicle is being used by the driver. The proposed system is divided into two systems, namely vehicle weight confirmation system and weight warning system. In vehicle weight confirmation system, the weight sensor work for the first time after the ignition switch is turned on. When the weight is under the weight limit, the starter engine can be switched on to start the engine system, otherwise it will be locked. The seconds system, will operated after checking all the door at close position, once the door of the car is closed, the weight warning system will check once again the weight during runing engine condition. The results of these two systems, vehicle weight confirmation system and weight warning system have 100 % accuracy, respectively. These show that the proposed vehicle weight limitation system operate well.

Performance of a Light-Weight Ablative Thermal Protection Material for the Stardust Mission Sample Return Capsule

NASA Technical Reports Server (NTRS)

Covington, M. A.

2005-01-01

New tests and analyses are reported that were carried out to resolve testing uncertainties in the original development and qualification of a lightweight ablative material used for the Stardust spacecraft forebody heat shield. These additional arcjet tests and analyses confirmed the ablative and thermal performance of low density Phenolic Impregnated Carbon Ablator (PICA) material used for the Stardust design. Testing was done under conditions that simulate the peak convective heating conditions (1200 W/cm2 and 0.5 atm) expected during Earth entry of the Stardust Sample Return Capsule. Test data and predictions from an ablative material response computer code for the in-depth temperatures were compared to guide iterative adjustment of material thermophysical properties used in the code so that the measured and predicted temperatures agreed. The PICA recession rates and maximum internal temperatures were satisfactorily predicted by the computer code with the revised properties. Predicted recession rates were also in acceptable agreement with measured rates for heating conditions 37% greater than the nominal peak heating rate of 1200 W/sq cm. The measured in-depth temperature response data show consistent temperature rise deviations that may be caused by an undocumented endothermic process within the PICA material that is not accurately modeled by the computer code. Predictions of the Stardust heat shield performance based on the present evaluation provide evidence that the maximum adhesive bondline temperature will be much lower than the maximum allowable of 250 C and an earlier design prediction. The re-evaluation also suggests that even with a 25 percent increase in peak heating rates, the total recession of the heat shield would be a small fraction of the as-designed thickness. These results give confidence in the Stardust heat shield design and confirm the potential of PICA material for use in new planetary probe and sample return applications.

Do fattening process and biological parameters affect the accumulation of metals in Atlantic bluefin tuna?

PubMed

Milatou, Niki; Dassenakis, Manos; Megalofonou, Persefoni

2015-01-01

The objective of this study was to determine the current levels of heavy metals and trace elements in Atlantic bluefin tuna muscle tissues and how they are influenced by the fattening process and various life history parameters to ascertain whether the concentrations in muscle tissue exceed the maximum levels defined by the European Commission Decision and to evaluate the health risk posed by fish consumption. A total of 20 bluefin tuna reared in sea cages, ranging from 160 to 295 cm in length and from 80 to 540 kg in weight, were sampled from a bluefin tuna farm in the Ionian Sea. The condition factor K of each specimen was calculated and their age was estimated. Heavy metal and trace element (Hg, Zn, Fe and Cu) contents were determined in muscle tissue using cold vapour atomic absorption spectrometry and flame and graphite furnace atomic absorption spectrometry. The total Hg concentrations ranged from 0.28 to 1.28 mg kg(-1) w/w, Zn from 5.81 to 76.37 mg kg(-1) w/w, Fe from 12.14 to 39.58 mg kg(-1) w/w, and Cu from 0.36 to 0.94 mg kg(-1) w/w. Only 5% of the muscle samples of tuna contained Hg above the maximum level laid down by the European Commission Decision. Moreover, 15% of the muscle samples contained Zn above the maximum level, while Fe and Cu concentrations were within the acceptable tolerable guideline values. The reared bluefin tuna had lower concentrations of Hg than the wild ones from the Mediterranean Sea. Hg and Fe concentrations showed a positive relationship with size and age of bluefin tuna, whereas negative relationships were found for the concentrations of Zn and Cu. The estimated dietary intake values of the analysed metals were mostly below the derived guidelines.

Foot Type Biomechanics Part 2: are structure and anthropometrics related to function?

PubMed

Mootanah, Rajshree; Song, Jinsup; Lenhoff, Mark W; Hafer, Jocelyn F; Backus, Sherry I; Gagnon, David; Deland, Jonathan T; Hillstrom, Howard J

2013-03-01

Many foot pathologies are associated with specific foot types. If foot structure and function are related, measurement of either could assist with differential diagnosis of pedal pathologies. Biomechanical measures of foot structure and function are related in asymptomatic healthy individuals. Sixty-one healthy subjects' left feet were stratified into cavus (n=12), rectus (n=27) and planus (n=22) foot types. Foot structure was assessed by malleolar valgus index, arch height index, and arch height flexibility. Anthropometrics (height and weight), age, and walking speed were measured. Foot function was assessed by center of pressure excursion index, peak plantar pressure, maximum force, and gait pattern parameters. Foot structure and anthropometric variables were entered into stepwise linear regression models to identify predictors of function. Measures of foot structure and anthropometrics explained 10-37% of the model variance (adjusted R(2)) for gait pattern parameters. When walking speed was included, the adjusted R(2) increased to 45-77% but foot structure was no longer a factor. Foot structure and anthropometrics predicted 7-47% of the model variance for plantar pressure and 16-64% for maximum force parameters. All multivariate models were significant (p<0.05), supporting acceptance of the hypothesis. Foot structure and function are related in asymptomatic healthy individuals. The structural parameters employed are basic measurements that do not require ionizing radiation and could be used in a clinical setting. Further research is needed to identify additional predictive parameters (plantar soft tissue characteristics, skeletal alignment, and neuromuscular control) and to include individuals with pathology. Copyright © 2012. Published by Elsevier B.V.

Foot Type Biomechanics Part 2: Are structure and anthropometrics related to function?

PubMed Central

Mootanah, Rajshree; Song, Jinsup; Lenhoff, Mark W.; Hafer, Jocelyn F.; Backus, Sherry I.; Gagnon, David; Deland, Jonathan T.; Hillstrom, Howard J.

2013-01-01

Background Many foot pathologies are associated with specific foot types. If foot structure and function are related, measurement of either could assist with differential diagnosis of pedal pathologies. Hypothesis Biomechanical measures of foot structure and function are related in asymptomatic healthy individuals. Methods Sixty-one healthy subjects' left feet were stratified into cavus (n = 12), rectus (n = 27) and planus (n = 22) foot types. Foot structure was assessed by malleolar valgus index, arch height index, and arch height flexibility. Anthropometrics (height and weight), age, and walking speed were measured. Foot function was assessed by center of pressure excursion index, peak plantar pressure, maximum force, and gait pattern parameters. Foot structure and anthropometric variables were entered into stepwise linear regression models to identify predictors of function. Results Measures of foot structure and anthropometrics explained 10–37% of the model variance (adjusted R2) for gait pattern parameters. When walking speed was included, the adjusted R2 increased to 45–77% but foot structure was no longer a factor. Foot structure and anthropometrics predicted 7–47% of the model variance for plantar pressure and 16–64% for maximum force parameters. All multivariate models were significant (p < 0.05), supporting acceptance of the hypothesis. Discussion and conclusion Foot structure and function are related in asymptomatic healthy individuals. The structural parameters employed are basic measurements that do not require ionizing radiation and could be used in a clinical setting. Further research is needed to identify additional predictive parameters (plantar soft tissue characteristics, skeletal alignment, and neuromuscular control) and to include individuals with pathology. PMID:23107624

Beyond QALYs: Multi-criteria based estimation of maximum willingness to pay for health technologies.

PubMed

Nord, Erik

2018-03-01

The QALY is a useful outcome measure in cost-effectiveness analysis. But in determining the overall value of and societal willingness to pay for health technologies, gains in quality of life and length of life are prima facie separate criteria that need not be put together in a single concept. A focus on costs per QALY can also be counterproductive. One reason is that the QALY does not capture well the value of interventions in patients with reduced potentials for health and thus different reference points. Another reason is a need to separate losses of length of life and losses of quality of life when it comes to judging the strength of moral claims on resources in patients of different ages. An alternative to the cost-per-QALY approach is outlined, consisting in the development of two bivariate value tables that may be used in combination to estimate maximum cost acceptance for given units of treatment-for instance a surgical procedure, or 1 year of medication-rather than for 'obtaining one QALY.' The approach is a follow-up of earlier work on 'cost value analysis.' It draws on work in the QALY field insofar as it uses health state values established in that field. But it does not use these values to weight life years and thus avoids devaluing gained life years in people with chronic illness or disability. Real tables of the kind proposed could be developed in deliberative processes among policy makers and serve as guidance for decision makers involved in health technology assessment and appraisal.

14 CFR 23.203 - Turning flight and accelerated turning stalls.

Code of Federal Regulations, 2012 CFR

2012-01-01

... § 23.201(b), it must be possible to regain wings level flight by normal use of the flight controls, but... percent of maximum continuous power results in extreme nose-up attitudes, the test may be carried out with..., if the power-to-weight ratio at 75 percent of maximum continuous power results in nose-high attitudes...

14 CFR 135.159 - Equipment requirements: Carrying passengers under VFR at night or under VFR over-the-top conditions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... chapter. (2) Helicopters with a third attitude instrument system usable through flight attitudes of ±80.... (3) Helicopters with a maximum certificated takeoff weight of 6,000 pounds or less. (b) A slip skid...) Notwithstanding provisions of paragraphs (b), (c), and (d), helicopters having a maximum certificated takeoff...

14 CFR 135.159 - Equipment requirements: Carrying passengers under VFR at night or under VFR over-the-top conditions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... chapter. (2) Helicopters with a third attitude instrument system usable through flight attitudes of ±80.... (3) Helicopters with a maximum certificated takeoff weight of 6,000 pounds or less. (b) A slip skid...) Notwithstanding provisions of paragraphs (b), (c), and (d), helicopters having a maximum certificated takeoff...

14 CFR 135.159 - Equipment requirements: Carrying passengers under VFR at night or under VFR over-the-top conditions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... chapter. (2) Helicopters with a third attitude instrument system usable through flight attitudes of ±80.... (3) Helicopters with a maximum certificated takeoff weight of 6,000 pounds or less. (b) A slip skid...) Notwithstanding provisions of paragraphs (b), (c), and (d), helicopters having a maximum certificated takeoff...

14 CFR 135.159 - Equipment requirements: Carrying passengers under VFR at night or under VFR over-the-top conditions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... chapter. (2) Helicopters with a third attitude instrument system usable through flight attitudes of ±80.... (3) Helicopters with a maximum certificated takeoff weight of 6,000 pounds or less. (b) A slip skid...) Notwithstanding provisions of paragraphs (b), (c), and (d), helicopters having a maximum certificated takeoff...

A Rapid Empirical Method for Estimating the Gross Takeoff Weight of a High Speed Civil Transport

NASA Technical Reports Server (NTRS)

Mack, Robert J.

1999-01-01

During the cruise segment of the flight mission, aircraft flying at supersonic speeds generate sonic booms that are usually maximum at the beginning of cruise. The pressure signature with the shocks causing these perceived booms can be predicted if the aircraft's geometry, Mach number, altitude, angle of attack, and cruise weight are known. Most methods for estimating aircraft weight, especially beginning-cruise weight, are empirical and based on least- square-fit equations that best represent a body of component weight data. The empirical method discussed in this report used simplified weight equations based on a study of performance and weight data from conceptual and real transport aircraft. Like other weight-estimation methods, weights were determined at several points in the mission. While these additional weights were found to be useful, it is the determination of beginning-cruise weight that is most important for the prediction of the aircraft's sonic-boom characteristics.

Cultural perceptions of healthy weight in rural Appalachian youth.

PubMed

Williams, K J; Taylor, C A; Wolf, K N; Lawson, R F; Crespo, R

2008-01-01

Rates of overweight among US children have been rising over the past three decades. Changes in lifestyle behaviors, including dietary and physical activity habits, have been examined thoroughly to identify correlates of weight status in children. Youth in rural US Appalachia are at a disproportionately greater risk for obesity and related health complications. Inadequate physical activity and poor dietary habits are two primary causes of obesity that have been noted in West Virginia adolescents. Few existing data describes the decisional balance in performing lifestyle behaviors, nor the perceptions of these youth regarding their beliefs about weight. The purpose of this study was to identify the perceptions of a healthy weight in rural Appalachian adolescents. Ninth grade students were recruited from classroom presentations in four high schools throughout West Virginia. Interested parent-caregiver pairs returned forms to indicate interest in participation. Separate focus group interviews were conducted concurrently with adolescent and parents or caregivers to identify the cultural perceptions of a healthy weight. Questions were developed using grounded theory to explore how a healthy weight was defined, what factors dictate body weight, the perceived severity of the obesity issue, and the social or health ramifications of the condition. Verbatim transcripts were analyzed to identify dominant themes, and content analysis provided text segments to describe the themes. This article describes the data obtained from the adolescent focus groups. When asked what defined a healthy weight, the adolescents who participated in the focus groups placed great value on physical appearance and social acceptability. Students believed there was a particular number, either an absolute weight or body mass index value that determined a healthy weight. These numbers were usually conveyed by a physician; however, there was also a general acceptance of being 'thick' or a reliance on 'feeling healthy' as a determinant of maintaining a healthy weight. Despite these beliefs, many teens had unrealistic and unhealthy perceptions of weight. Female participants were more concerned with weight than males, some to the point of obsession. Both males and females expressed a social stigma associated with overweight. Issues of guilt and diminished self-esteem were prevalent. When asked about the extensiveness of the problem of childhood overweight, the students indicated that a degree of familiarity with being overweight has developed and 'you just get used to [seeing] it.' Because of the rising rates of chronic disease in this region, a fear was evident in these youth about the increased risk of developing these conditions in those who are overweight. Experiences with family members with diabetes and cardiovascular disease fueled these concerns, which instilled a fear of becoming overweight in many of the students. Many perceptions of healthy weight and appropriate body size were shaped by the media and entertainment industry. Additionally, some participants admitted to performing unsafe practices to reduce body mass, such as very low calorie diets or fasting. Youth in rural Appalachia present similar perceptions about weight as other children; however, differences in perceived healthy lifestyle habits and a general acceptance of a higher average body weight present additional challenges to addressing the increasing problem of child overweight. Despite the relative isolation of many of these communities, the media has a profound impact on weight valuation that has been intertwined with school-based health education and cultural values of health. These data will provide valuable information for the development of obesity prevention programs in rural Appalachia.

A pilot study comparing two weight loss maintenance interventions among low-income, mid-life women

PubMed Central

2013-01-01

Background Despite high obesity prevalence rates, few low-income midlife women participate in weight loss maintenance trials. This pilot study aims to assess the effectiveness of two weight loss maintenance interventions in this under-represented population. Methods Low-income midlife women who completed a 16-week weight loss intervention and lost ≥ 8 lbs (3.6 kg) were eligible to enroll in one of two 12-month maintenance programs. The programs were similar in content and had the same number of total contacts, but were different in the contact modality (Phone + Face-to-Face vs. Face-to-Face Only). Two criteria were used to assess successful weight loss maintenance at 12 months: (1) retaining a loss of ≥ 5% of body weight from the start of the weight loss phase and (2) a change in body weight of < 3%, from the start to the end of the maintenance program. Outcome measures of changes in physiologic and psychosocial factors, and evaluations of process measures and program acceptability (measured at 12 months) are also reported. For categorical variables, likelihood ratio or Fisher’s Exact (for small samples) tests were used to evaluate statistically significant relationships; for continuous variables, t-tests or their equivalents were used to assess differences between means and also to identify correlates of weight loss maintenance. Results Overall, during the 12-month maintenance period, 41% (24/58) of participants maintained a loss of ≥ 5% of initial weight and 43% (25/58) had a <3% change in weight. None of the comparisons between the two maintenance programs were statistically significant. However, improvements in blood pressure and dietary behaviors remained significant at the end of the 12-month maintenance period for participants in both programs. Participant attendance and acceptability were high for both programs. Conclusions The effectiveness of two pilot 12-month maintenance interventions provides support for further research in weight loss maintenance among high-risk, low-income women. Trial registration ClinicalTrials.gov Identifier: NCT00288301 PMID:23855318

Study on Influencing Factor Analysis and Application of Consumer Mobile Commerce Acceptance

NASA Astrophysics Data System (ADS)

Li, Gaoguang; Lv, Tingjie

Mobile commerce (MC) refers to e-commerce activities carried out using a mobile device such as a phone or PDA. With new technology, MC will be rapidly growing in the near future. At the present time, what factors making consumer accept MC and what MC applications are acceptable by consumers are two of hot issues both for MC providers and f or MC researchers. This study presents a proposed MC acceptance model that integrates perceived playfulness, perceived risk and cost into the TAM to study which factors affect consumer MC acceptance. The proposed model includes five variables, namely perceived risk, cost, perceived usefulness, perceived playfulness, perceived ease of use, perceived playfulness. Then, using analytic hierarchy process (AHP) to calculate weight of criteria involved in proposed model. Finally, the study utilizes fuzzy comprehensive evaluation method to evaluate MC applications accepted possibility, and then a MC application is empirically tested using data collected from a survey of MC consumers.

Climate change and the impact of extreme temperatures on aviation

NASA Astrophysics Data System (ADS)

Coffel, E.; Horton, R.

2014-12-01

Weather is the most significant factor affecting aircraft operations, accounting for 70-80% of passenger delays and costing airlines hundreds of millions of dollars per year in lost revenue. Temperature and airport elevation significantly influence the maximum allowable takeoff weight of an aircraft by changing the surface air density and thus the lift produced at a given speed. For a given runway length, airport elevation, and aircraft type there is a temperature threshold above which the airplane cannot take off at its maximum weight and thus must be weight restricted. The number of summer days necessitating weight restriction has increased since 1980 along with the observed increase in surface temperature. Climate change is projected to increase mean temperatures at all airports and significantly increase the frequency and severity of extreme heat events at some. These changes will negatively affect aircraft performance, leading to increased weight restrictions especially at airports with short runways and little room to expand. For a Boeing 737-800 aircraft, we find that the number of weight restriction days between May and September will increase by 50-100% at four major airports in the United States by 2050-2070 under the RCP8.5 high emissions scenario. These performance reductions may have a significant economic effect on the airline industry, leading to lower profits and higher passenger fares. Increased weight restrictions have previously been identified as potential impacts of climate change, but this study is the first to quantify the effect of higher temperatures on commercial aviation.

Using Facebook and text messaging to deliver a weight loss program to college students.

PubMed

Napolitano, Melissa A; Hayes, Sharon; Bennett, Gary G; Ives, Allison K; Foster, Gary D

2013-01-01

Between 31 and 35% of the college-aged population is overweight or obese, yet few weight loss trials for this population have been conducted. This study examined the feasibility, acceptability, and initial efficacy of a technology-based 8-week weight loss intervention among college students. Students (N = 52) were randomly assigned to one of the three arms: Facebook (n = 17); Facebook Plus text messaging and personalized feedback (n = 18); Waiting List control (n = 17), with assessments at 4 weeks and 8 weeks (post-treatment). Participants were 20.47 ± 2.19 years old, 86.45 ± 17.11 kg, with a body mass index of 31.36 ± 5.3 kg/m(2) . Participants were primarily female (86.5%), and the sample was racially diverse (57.7% Caucasian, 30.8% African American, 5.8% Hispanic, and 5.7% other races). The primary outcome was weight loss after 8 weeks (post-treatment); 96.0% of the participants completed this assessment. At 8 weeks, the Facebook Plus group had significantly greater weight loss (-2.4 ± 2.5 kg) than the Facebook (-0.63 ± 2.4 kg) and Waiting List (-0.24 ± 2.6 kg) (both Ps < 0.05). Weight change at 8 weeks was not significantly different between the Facebook and Waiting List groups. Results show preliminary efficacy and acceptability of the two active intervention arms (97.0% found the program helpful, 81.3% found the videos/handouts helpful, and 100% would recommend the program to others). Results indicate the potential for an innovative weight loss intervention that uses technology platforms (Facebook and text messaging) that are frequently used and already integrated into the cultural life of college students. Copyright © 2012 The Obesity Society.

Container System Hardware (1992) Status Report

DTIC Science & Technology

1992-01-01

high ). The 35’ special-purpose flatracks were designed specifically for use on-board the T- AKR and are capable of carrying a maximum cargo ...primarily to ship ammunition having a high weight to volume ratio such as 155mm projectiles. STATUS In August 1989, the Navy awarded a contract to...and have external dimensions of 8’ wide, 8’ high , and 20’ long. Gross shipping weight is 20,000 pounds with a tare weight of approximately

Response to Enhanced Cognitive Behavioural Therapy in an Adolescent with Anorexia Nervosa.

PubMed

Cowdrey, Felicity A; Davis, Jennifer

2016-11-01

Few studies have examined the acceptability and usefulness of enhanced cognitive behavioural therapy (CBT-E) for adolescents with eating disorders (EDs). To investigate whether CBT-E was an acceptable and efficacious treatment for an adolescent presenting to a routine clinical service with an ED. Daily self-monitoring records were completed during a baseline (A) and intervention (B) phase in addition to routine outcome measures. There were reductions in both ED behaviours and "feeling fat", and increases in weight after 11 CBT-E sessions. Progress was only partially maintained at 8-month follow-up. CBT-E may be an acceptable and useful intervention for adolescents with EDs.

Effects of competing news media frames of weight on antifat stigma, beliefs about weight and support for obesity-related public policies.

PubMed

Frederick, D A; Saguy, A C; Sandhu, G; Mann, T

2016-03-01

In the popular news media, public health officials routinely emphasize the health risks of obesity and portray weight as under personal control. These messages may increase support for policies designed to reduce rates of obesity, but can also increase antifat stigma. Less often, the media cover 'Health at Every Size' or 'Fat Rights' perspectives that may have the opposite effects. We investigated how exposure to different 'fat frames' shifts attitudes about weight and support for obesity policies. Across four experiments (n=2187), people read constructed news articles framing fatness as negative (unhealthy, controllable, acceptable to stigmatize) or positive (healthy, uncontrollable, unacceptable to stigmatize). Compared with people who read fat-positive frames, people who read fat-negative frames expressed more: belief in the health risks of being fat (d=0.95-1.22), belief weight is controllable (d=0.38-0.55), support for charging obese people more for health insurance (d=0.26-0.77), antifat prejudice (in three out of four experiments, d=0.28-0.39), willingness to discriminate against fat people (d=0.39-0.71) and less willingness to celebrate body size diversity (d=0.37-0.64). They were also less willing to say that women at the lower end of the obese range could be healthy at their weights. Effects on support for public policies, however, were generally small and/or nonsignificant. Compared with a control condition, exposure to fat-positive frames generally shifted attitudes more than fat-negative frames. In experiment 4, adding a message about the unacceptability of weight-based discrimination to unhealthy/controllable news articles only reduced antifat stigma on one of three measures compared with articles adding a discrimination-acceptable message. Exposure to different news frames of fat can shift beliefs about weight-related health risks and weight-based stigma. Shifting policy attitudes, however, is more challenging.

A plant-based diet for overweight and obesity prevention and treatment

PubMed Central

Turner-McGrievy, Gabrielle; Mandes, Trisha; Crimarco, Anthony

2017-01-01

The goal of this paper is to review the evidence related to the effect of plant-based dietary patterns on obesity and weight loss, including both observational and intervention trials. Literature from plant-based diets (PBDs) epidemiological and clinical trial research was used to inform this review. In addition, data on dietary quality, adherence, and acceptability were evaluated and are presented. Both clinical trials and observational research indicate an advantage to adoption of PBDs for preventing overweight and obesity and promoting weight loss. PBDs may also confer higher levels of diet quality than are observed with other therapeutic diet approaches, with similar levels of adherence and acceptability. Future studies should utilize health behavior theory to inform intervention development and delivery of PBDs studies and new technologies to bring interventions to scale for greater public health impact. Research examining PBDs and weight loss is also needed with more diverse populations, including older adults. Based on the available evidence, PBDs should be considered a viable option for the treatment and prevention of overweight and obesity. PMID:28630616

A plant-based diet for overweight and obesity prevention and treatment.

PubMed

Turner-McGrievy, Gabrielle; Mandes, Trisha; Crimarco, Anthony

2017-05-01

The goal of this paper is to review the evidence related to the effect of plant-based dietary patterns on obesity and weight loss, including both observational and intervention trials. Literature from plant-based diets (PBDs) epidemiological and clinical trial research was used to inform this review. In addition, data on dietary quality, adherence, and acceptability were evaluated and are presented. Both clinical trials and observational research indicate an advantage to adoption of PBDs for preventing overweight and obesity and promoting weight loss. PBDs may also confer higher levels of diet quality than are observed with other therapeutic diet approaches, with similar levels of adherence and acceptability. Future studies should utilize health behavior theory to inform intervention development and delivery of PBDs studies and new technologies to bring interventions to scale for greater public health impact. Research examining PBDs and weight loss is also needed with more diverse populations, including older adults. Based on the available evidence, PBDs should be considered a viable option for the treatment and prevention of overweight and obesity.

Psychological flexibility mediates change in intuitive eating regulation in acceptance and commitment therapy interventions.

PubMed

Sairanen, Essi; Tolvanen, Asko; Karhunen, Leila; Kolehmainen, Marjukka; Järvelä-Reijonen, Elina; Lindroos, Sanni; Peuhkuri, Katri; Korpela, Riitta; Ermes, Miikka; Mattila, Elina; Lappalainen, Raimo

2017-06-01

Despite the promising results related to intuitive eating, few studies have attempted to explain the processes encouraging this adaptive eating behaviour. The focus of the present study was on exploring mechanisms of change in intuitive eating and weight in acceptance and commitment therapy (ACT) interventions. Mediation provides important information regarding the treatment processes and theoretical models related to specific treatment approaches. The study investigates whether psychological flexibility, mindfulness skills and sense of coherence mediated the interventions' effect on intuitive eating and weight. Secondary analysis of a randomized control trial. Mediation analysis compared two ACT interventions - face-to-face (in a group) and mobile (individually) - with a control group using a latent difference score model. Settings Data were collected in three Finnish towns. The participants were overweight or obese (n 219), reporting symptoms of perceived stress. The effect of the interventions on participants' (i) BMI, (ii) intuitive eating and its subscales, (iii) eating for physical rather than emotional reasons and (iv) reliance on internal hunger and satiety cues was mediated by changes in weight-related psychological flexibility in both ACT groups. These findings suggest that ACT interventions aiming for lifestyle changes mediate the intervention effects through the enhanced ability to continue with valued activities even when confronted with negative emotions and thoughts related to weight.

Nutrient content of young cassava leaves and assessment of their acceptance as a green vegetable in Nigeria.

PubMed

Awoyinka, A F; Abegunde, V O; Adewusi, S R

1995-01-01

Cassava (Manihot esculenta Crantz) leaves contained a high level of crude protein (29.3-32.4% dry weight) compared to a conventional vegetable, Amaranthus (19.6%). Ash was 4.6-6.4% in cassava leaf samples but 13.1% dry weight in Amaranthus. Dietary fibre was very high in all samples (26.9-39% dry weight) while HCN-potential was low (5.1-12.6 mg/100 g dry weight). Tannin was the highest in IITA red cassava leaves (29.7 mg/g) and the lowest in Amaranthus vegetable. In vitro digestibility was very low in oven dried samples (15.6-22.7%). Blanching increased protein content (except Amaranthus) and in vitro protein digestibility but decreased ash, minerals, dietary fibre and tannin, while HCN-potential was unchanged. Grinding reduced both HCN-potential and tannin by 84 and 71% respectively while oven drying only reduced the HCN content marginally. Preference studies showed that the highest percentage of respondents (25.3%) preferred Amaranthus vegetable, followed by Celosia (17.5%), Talinum (12.4%), garden egg (11.5%), with cassava leaves as the least (0.5%). Organoleptic evaluation rated cassava leaf soup inferior to Amaranthus in terms of appearance, colour and texture but equal in terms of taste and flavour and overall acceptability.

A randomized pilot study of a community-based weight loss intervention for African-American women: Rationale and study design of Doing Me! Sisters Standing Together for a Healthy Mind and Body.

PubMed

Springfield, Sparkle; Buscemi, Joanna; Fitzgibbon, Marian L; Stolley, Melinda R; Zenk, Shannon N; Schiffer, Linda; Sampson, Jameika; Jones, Quiana; Murdock, Tanine; Davis, Iona; Holland, Loys; Watkins, April; Odoms-Young, Angela

2015-07-01

Despite the high prevalence of obesity among African-American women and modest success in behavioral weight loss interventions, the development and testing of weight management interventions using a community-based participatory research (CBPR) approach have been limited. Doing Me!: Sisters Standing Together for Healthy Mind and Body (Doing Me!) is an intervention adapted from an evidence-based behavioral obesity intervention using a CBPR approach. The purpose of Doing Me! is to test the feasibility and acceptability of this adapted intervention and determine its efficacy in achieving improvements in anthropometrics, diet, and physical activity. Sixty African-American women, from a low-income, urban community, aged 30-65 years will be randomized to one of two arms: 16-week Doing Me! (n = 30) or waitlist control (n = 30). Doing Me! employs CBPR methodology to involve community stakeholders and members during the planning, development, implementation, and evaluation phases of the intervention. There will be thirty-two 90-minute sessions incorporating 45 min of instruction on diet, physical activity, and/or weight management plus 45 min of physical activity. Data will be collected at baseline and post-intervention (16 weeks). Doing Me! is one of the first CBPR studies to examine the feasibility/acceptability of an adapted evidence-based behavioral weight loss intervention designed for obese African-American women. CBPR may be an effective strategy for implementing a weight management intervention among this high-risk population. Copyright © 2015 Elsevier Inc. All rights reserved.

The Vacuum-Compacted Regolith Gripping Mechanism and Unmanned Flights via Quad-Rotors

NASA Technical Reports Server (NTRS)

Scott, Rollin L.

2014-01-01

During the course of the Kennedy Space Center Summer Internship, two main experiments were performed: The Vacuum-Compacted Regolith Gripping Mechanism and Unmanned Flights via Quad-copters. The objectives of the Vacuum-Compacted Regolith Gripping Mechanism, often abbreviated as the Granular Gripper, are to exhibit Space Technology, such as a soft robotic hand, lift different apparatuses used to excavate regolith, and conserve energy while executing its intended task. The project is being conducted to test how much weight the Granular Gripper can hold. With the use of an Animatronic Robotic Hand, Arduino Uno, and other components, the system was calibrated before actually conducting the intended weight test. The maximum weight each finger could hold with the servos running, in the order of pinky, ring, middle, and index fingers, are as follows: 1.340N, 1.456 N, 0.9579 N, and 1.358 N. Using the small vacuum pump system, the maximum weight each finger could hold, in the same order, was: 4.076 N, 6.159 N, 5.454 N, and 4.052 N. The maximum torques on each of the fingers when the servos were running, in the same respective order, was: 0.0777 Nm, 0.0533 Nm, 0.0648 Nm, and 0.0532 Nm. The maximum torques on the individual fingers, when the small vacuum pump was in effect, in the same order as above, was: 0.2318 Nm, 0.3032 Nm, 0.2741 Nm, and 0.1618 Nm. In testing all the fingers with the servos running, the total weight was 5.112 N and the maximum torque on the all the fingers was 0.2515 Nm. However, when the small vacuum pump system was used, the total weight was 19.741 N and the maximum torque on the all the fingers was 0.9713 Nm. The conclusion that was drawn stated that using the small vacuum pump system proved nearly 4 times more effective when testing how much weigh the hand could hold. The resistance provided by the compacted sand in the glove allowed more weight to be held by the hand and glove. Also, when the servos turned off and the hand still retaining its position, energy is being saved because the vacuum created the same resistance the running servos did without using power. The Unmanned Flights via Quad-rotors are built because multi-rotor dynamics are an important starting point and fair analog for space craft control systems and they make good terrestrial development platforms for various aspects of control for space crafts. The project is being conducted to see what the thrust response is going to be when a pulse width modulation command is sent to the control system since the quad-rotors are PWM controlled. A simulation environment in constructed so that one can quickly iterate and test different designs such as control systems, PID control vs. LDR control, and state estimation. Using two DIY Quad Kits, APM 2.6, testing apparatus (called a data acquisition system) to test the quad-rotors, and a simulation program such as Simulink, two quad-rotors are built and controlled via a simulation program, which is designed to be as realistic as possible and not idealistic. Due to the quad-rotors not being completely built nor ready for testing, there are no results or conclusions to report.

77 FR 66824 - City of Holyoke Gas and Electric Department; Notice of Application Accepted for Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-07

... fishlift entrance. The licensee further proposes to do an in-kind replacement of the Hadley Unit 1 turbine... capacity by 600 kilowatts, and increase the maximum hydraulic capacity by an estimated 320 cubic feet per...

78 FR 66914 - Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments, Motions To...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

... upper reservoir having a total/usable storage capacity of 5,399 acre-feet at normal maximum operation... penstocks connecting the upper reservoir to the Pacific Ocean; (4) a 500-foot-long, 250-foot-diameter...

Assessing the Feasibility of a Social Media to Promote Weight Management Engagement in Adolescents with Severe Obesity: Pilot Study

PubMed Central

Moore, Reneé H; Li, Ziyi; Bishop-Gilyard, Chanelle T; Garrett, Andrew R; Hill, Douglas L; Bruton, Yasmeen P; Sarwer, David B

2018-01-01

Background Severe obesity in adolescents has deleterious physical and psychological complications necessitating frequent multi-disciplinary clinic visits. Greater treatment engagement has been equated with weight-loss. However, traditional medical weight-loss programs for adolescents have high attrition rates. Social media is widely used by adolescents and may enhance medical weight management engagement and success. Objective The first objective was to examine the acceptability and feasibility of using a private social media group as an adjunct to medical weight management in youth ages 14 to 20 years with severe obesity [body mass index (BMI) ≥ 35 kg/m2]. The second objective was to pilot test the use of social media to improve treatment engagement and decrease attrition rates. Methods In this single arm, 12 week pre-post study, participants attended individual clinic visits and participated in a moderated private social media group that received nutrition, exercise, and behavior change social media communications or “posts” 3 to 4 times/week. Youth commented and/or liked posts from the moderator and each other. Social media engagement was measured with the number of likes and comments on social media. Clinic attrition was compared, measuring clinic visit attendance 12 weeks prior, during, and after the intervention with mixed linear regression models. Correlations of social media engagement with changes from baseline for BMI, BMI-z score, and psychosocial measures were fit. Results All 13 enrolled youth completed the study and reported that the group was enjoyable, helpful, reinforced their weight management program, and would recommend using social media to support other youth. The pilot trial was acceptable and feasible. Youth mean weekly engagement (likes + comments) in social media was greater than once a day (8.6 ±3.6). Compared to 12 weeks prior to the intervention, there was no significant decrease in clinic visit attendance at the end of the intervention (M=.231, P=.69) or 12 weeks at the conclusion of the intervention (M=.589, P=.28). Increased social media comments correlated with weight change (r=–.633, P=.04). Conclusions This pilot trial demonstrated that the use of social media as an adjunct to medical weight management was feasible and acceptable to adolescents with severe obesity. Based upon these preliminary findings, social media may be an effective way to mitigate attrition from obesity treatment programs, and improve health outcomes in this high-risk population. PMID:29555623