Mandibular kinematics and maximum voluntary bite force following segmental resection of the mandible without or with reconstruction.

PubMed

Linsen, Sabine S; Oikonomou, Annina; Martini, Markus; Teschke, Marcus

2018-05-01

The purpose was to analyze mandibular kinematics and maximum voluntary bite force in patients following segmental resection of the mandible without and with reconstruction (autologous bone, alloplastic total temporomandibular joint replacement (TMJ TJR)). Subjects operated from April 2002 to August 2014 were enrolled in the study. Condylar (CRoM) and incisal (InRoM) range of motion and deflection during opening, condylar retrusion, incisal lateral excursion, mandibular rotation angle during opening, and maximum voluntary bite force were determined on the non-affected site and compared between groups. Influence of co-factors (defect size, soft tissue deficit, neck dissection, radiotherapy, occlusal contact zones (OCZ), and time) was determined. Twelve non-reconstructed and 26 reconstructed patients (13 autologous, 13 TMJ TJR) were included in the study. InRoM opening and bite force were significantly higher (P ≤ .024), and both condylar and incisal deflection during opening significantly lower (P ≤ .027) in reconstructed patients compared with non-reconstructed. Differences between the autologous and the TMJ TJR group were statistically not significant. Co-factors defect size, soft tissue deficit, and neck dissection had the greatest impact on kinematics and number of OCZs on bite force. Reconstructed patients (both autologous and TMJ TJR) have better overall function than non-reconstructed patients. Reconstruction of segmental mandibular resection has positive effects on mandibular function. TMJ TJR seems to be a suitable technique for the reconstruction of mandibular defects including the TMJ complex.

Bone-Breaking Bite Force of Basilosaurus isis (Mammalia, Cetacea) from the Late Eocene of Egypt Estimated by Finite Element Analysis

PubMed Central

Snively, Eric; Fahlke, Julia M.; Welsh, Robert C.

2015-01-01

Bite marks suggest that the late Eocence archaeocete whale Basilosaurus isis (Birket Qarun Formation, Egypt) fed upon juveniles of the contemporary basilosaurid Dorudon atrox. Finite element analysis (FEA) of a nearly complete adult cranium of B. isis enables estimates of its bite force and tests the animal’s capabilities for crushing bone. Two loadcases reflect different biting scenarios: 1) an intitial closing phase, with all adductors active and a full condylar reaction force; and 2) a shearing phase, with the posterior temporalis active and minimized condylar force. The latter is considered probable when the jaws were nearly closed because the preserved jaws do not articulate as the molariform teeth come into occulusion. Reaction forces with all muscles active indicate that B. isis maintained relatively greater bite force anteriorly than seen in large crocodilians, and exerted a maximum bite force of at least 16,400 N at its upper P3. Under the shearing scenario with minimized condylar forces, tooth reaction forces could exceed 20,000 N despite lower magnitudes of muscle force. These bite forces at the teeth are consistent with bone indentations on Dorudon crania, reatract-and-shear hypotheses of Basilosaurus bite function, and seizure of prey by anterior teeth as proposed for other archaeocetes. The whale’s bite forces match those estimated for pliosaurus when skull lengths are equalized, suggesting similar tradeoffs of bite function and hydrodynamics. Reaction forces in B. isis were lower than maxima estimated for large crocodylians and carnivorous dinosaurs. However, comparison of force estimates from FEA and regression data indicate that B. isis exerted the largest bite forces yet estimated for any mammal, and greater force than expected from its skull width. Cephalic feeding biomechanics of Basilosaurus isis are thus consistent with habitual predation. PMID:25714832

Chiropractic Manipulation Increases Maximal Bite Force in Healthy Individuals.

PubMed

Haavik, Heidi; Özyurt, Mustafa Görkem; Niazi, Imran Khan; Holt, Kelly; Nedergaard, Rasmus Wiberg; Yilmaz, Gizem; Türker, Kemal Sitki

2018-04-27

Recent research has shown that chiropractic spinal manipulation can alter central sensorimotor integration and motor cortical drive to human voluntary muscles of the upper and lower limb. The aim of this paper was to explore whether spinal manipulation could also influence maximal bite force. Twenty-eight people were divided into two groups of 14, one that received chiropractic care and one that received sham chiropractic care. All subjects were naive to chiropractic. Maximum bite force was assessed pre- and post-intervention and at 1-week follow up. Bite force in the chiropractic group increased compared to the control group ( p = 0.02) post-intervention and this between-group difference was also present at the 1-week follow-up ( p < 0.01). Bite force in the chiropractic group increased significantly by 11.0% (±18.6%) post-intervention ( p = 0.04) and remained increased by 13.0% (±12.9%, p = 0.04) at the 1 week follow up. Bite force did not change significantly in the control group immediately after the intervention (−2.3 ± 9.0%, p = 0.20), and decreased by 6.3% (±3.4%, p = 0.01) at the 1-week follow-up. These results indicate that chiropractic spinal manipulation can increase maximal bite force.

A multifactorial model of masticatory performance: the Suita study.

PubMed

Kosaka, T; Ono, T; Kida, M; Kikui, M; Yamamoto, M; Yasui, S; Nokubi, T; Maeda, Y; Kokubo, Y; Watanabe, M; Miyamoto, Y

2016-05-01

Previous studies have identified various factors related to masticatory performance. This study was aimed to investigate variations and impacts of factors related to masticatory performance among different occlusal support areas in general urban population in Japan. A total of 1875 Japanese subjects (mean age: 66·7 years) were included in the Suita study. Periodontal status was evaluated using the Community Periodontal Index (CPI). The number of functional teeth and occlusal support areas (OSA) were recorded, and the latter divided into three categories of perfect, decreased and lost OSA based on the Eichner Index. Masticatory performance was determined by means of test gummy jelly. For denture wearers, masticatory performance was measured with the dentures in place. The multiple linear regression analysis showed that, when controlling for other variables, masticatory performance was significantly associated with sex, number of functional teeth, maximum bite force and periodontal status in perfect OSA. Masticatory performance was significantly associated with number of functional teeth, maximum bite force and periodontal status in decreased OSA. In lost OSA, masticatory performance was significantly associated with maximum bite force. Maximum bite force was a factor significantly influencing masticatory performance that was common to all OSA groups. After controlling for possible confounding factors, the number of functional teeth and periodontal status were common factors in the perfect and decreased OSA groups, and only sex was significant in the perfect OSA group. These findings may help in providing dietary guidance to elderly people with tooth loss or periodontal disease. © 2015 John Wiley & Sons Ltd.

[Maximal isometric bite force and sports. Preliminary study].

PubMed

Sannajust, J P; Thiery, C; Poumarat, G; Vanneuville, G; Barthélémy, I; Mondie, J M

2002-06-01

The evaluation of the bite forces coupled with EMG activity of masseter muscles allows to point out temporo-mandibular joint disorders. The intense practice of sports induces stress which may affect the mandibular statics, due to an hyperfunction of the elevator masticatory muscles, especially the masseter muscles. This concept has led us to compare the maximum isometric bite forces of sedentary and physically trained subjects. The aim of this experimentation is to study the maximum isometric bite forces of the premolars, with a force transducer, for two groups of physically trained and sedentary volunteers (25 subjects), with distinction between male and female subjects. Subjects with normal denture and no temporo-mandibular joint disorder were retained. EMG and force recording were synchronized and recorded during 10 seconds of maximal contraction. The male subjects developed a maximal bite-force significantly higher (p < 0.05) compared to the female subjects. There is no significant difference between subjects practising a sport (at least 6 hours a week) and sedentary ones. The evolution of force during the contraction is different between sexes. EMG activity allowed to control that subjects developed a maximal force and an increase in muscular fatigability of physically active females compared to sedentary ones was noticed. The difference of maximal force between men and women is similar to the one found for the locomotor muscles. The analysis of the evolution of the force according to the contraction duration, might be linked to a different distribution of muscular fibers according to the sex. The practice of a sport might increase the fatigability of the masseter muscles and might be a factor inducing a muscular imbalance of the mandibular posture. But the relatively low number of subjects and the absence of well defined distinctions between different kinds of sport limit our conclusions.

Two-year follow-up of changes in bite force and occlusal contact area after intraoral vertical ramus osteotomy with and without Le Fort I osteotomy.

PubMed

Choi, Y J; Lim, H; Chung, C J; Park, K H; Kim, K H

2014-06-01

This study was performed to examine the longitudinal changes in bite force and occlusal contact area after mandibular setback surgery via intraoral vertical ramus osteotomy (IVRO). Patients with mandibular prognathism who underwent IVRO (surgical group: 39 men and 39 women) were compared with subjects with class I skeletal and dental relationships (control group; 32 men and 35 women). The surgical group was divided into two subgroups: 1-jaw surgery (n = 30) and 2-jaw surgery (n = 48). Bite force and contact area were measured in maximum intercuspation with the Dental Prescale System before treatment, within 1 month before surgery, and at 1, 3, 6, 9, 12, and 24 months postsurgery. A linear mixed model was used to investigate the time-dependent changes and associated factors. Bite force and contact area decreased during presurgical orthodontic treatment, were minimal at 1 month postsurgery, and increased gradually thereafter. The 1-jaw and 2-jaw subgroups showed no significant differences in bite force. The time-dependent changes in bite force were significantly different according to the contact area (P < 0.05). The results of this study suggest that bite force and occlusal contact area gradually increase throughout the postsurgical evaluation period. Increasing the occlusal contact area may be essential for improving bite force after surgery. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Three-dimensional finite element analysis of the stress distribution pattern in a mandibular first molar tooth restored with five different restorative materials.

PubMed

D'souza, Kathleen Manuela; Aras, Meena Ajay

2017-01-01

Badly broken or structurally compromised posterior teeth are frequently associated with crown/root fracture. Numerous restorative materials have been used to fabricate indirect full-coverage restorations for such teeth. This study aims to evaluate and compare the effect of restorative materials on the stress distribution pattern in a mandibular first molar tooth, under varying loading conditions and to compare the stress distribution pattern in five commonly used indirect restorative materials. Five three-dimensional finite element models representing a mandibular first molar tooth restored with crowns of gold, porcelain fused to metal, composite (Artglass), alumina-based zirconia (In-Ceram Zirconia [ICZ]), and double-layered zirconia-based materials (zirconia core veneered with porcelain, Lava) were constructed, using a Finite Element Analysis Software (ANSYS version 10; ANSYS Inc., Canonsburg, PA, USA). Two loading conditions were applied, simulating maximum bite force of 600 N axially and normal masticatory bite force of 225 N axially and nonaxially. Both all-ceramic crowns allowed the least amount of stress distribution to the surrounding tooth structure. In maximum bite force-simulation test, alumina-based all-ceramic crown displayed the highest von Mises stresses (123.745 MPa). In the masticatory bite force-simulation test, both all-ceramic crowns (122.503-133.13 MPa) displayed the highest von Mises stresses. ICZ crown displayed the highest peak von Mises stress values under maximum and masticatory bite forces. ICZ and Lava crowns also allowed the least amount of stress distribution to the surrounding tooth structure, which is indicative of a favorable response of the underlying tooth structure to the overlying full-coverage indirect restorative material. These results suggest that ICZ and Lava crowns can be recommended for clinical use in cases of badly damaged teeth.

Maximum bite force in elderly indigenous and non-indigenous denture wearers.

PubMed

Borie, Eduardo; Orsi, Iara A; Fuentes, Ramón; Beltrán, Víctor; Navarro, Pablo; Pareja, Felipe; Raimundo, Lariça B

2014-01-01

The aim of this study was to compare the measures of maximum bite force (MBF) in elderly edentulous indigenous (Mapuche) and non-indigenous individuals with new complete dentures at two different measuring times. A sample of 100 elderly subjects was divided into two groups: 50 indigenous and 50 non-indigenous, each including 25 females and 25 males. All individuals were totally edentulous, with new maxillary and mandibular removable complete dentures. Measurements were taken at the time of new prosthesis placement and after 1 month of use. Subjects were asked to perform with maximum effort three bites per side at maximum intercuspidation, with a rest time of 2 minutes in between. Statistics were analyzed with Student 's t-test. The MBF values were significantly higher in indigenous than non-indigenous subjects. Force after 1 month of wearing the new prosthesis was significantly higher than at the time of new prosthesis placement. No significant difference was found between sides. Elderly indigenous complete denture wearers had the greatest MBF values. Denture wearers were observed to undergo an adaptation process to the new prosthesis, with MBF increasing considerably after one month of use.

Biting and chewing in overdentures, full dentures, and natural dentitions.

PubMed

Fontijn-Tekamp, F A; Slagter, A P; Van Der Bilt, A; Van 'T Hof, M A; Witter, D J; Kalk, W; Jansen, J A

2000-07-01

It has been suggested that the provision of dental implants can improve the oral function of subjects with severely resorbed mandibles, possibly restoring function to the level experienced by satisfied wearers of conventional complete dentures. Nevertheless, a quantitative comparison has never been made and can be drawn from the literature only with difficulty, since studies differ greatly in methodology. To make such a comparison, we measured bite force and chewing efficiency by using identical methods in subjects with overdentures, complete full dentures, and natural dentitions. Our results indicated that bite forces achieved with overdentures on dental implants were between those achieved with artificial and natural dentitions. Chewing efficiency was significantly greater than that of subjects with full dentures (low mandible), but was still lower than that of subjects with full dentures (high mandible) and overdentures on bare roots. Differences in the height of the mandible revealed significant differences in chewing efficiency between the two full-denture groups. Furthermore, subjects with a shortened dental arch exerted bite forces similar to those of subjects with a complete-natural dentition, but their chewing efficiency was limited due to the reduced occlusal area. For all groups combined, a significant correlation was found between maximum bite force and chewing efficiency. Nearly half of the variation in chewing efficiency was explained by bite force alone.

Mandibular biomechanics and temporomandibular joint function in primates.

PubMed

Smith, R J

1978-09-01

There is disagreement as to whether the mandibular condyles are stress-bearing or stress-free during mastication. In support of alternative models, analogies have been drawn with Class III levers, links, and couple systems. Physiological data are reviewed which indicate that maximum masticatory forces are generated when maxillary and mandibular teeth are in contact, and that this phase lasts for over 100 msec during many chewing strokes. During this period, the mandible can be modeled as a beam with multiple supports. Equations of simple beam theory suggest that large condylar reaction forces are present during mastication. With unilateral molar biting in man, the total condylar reaction force may be over 75% of the bite force. Analysis of a frontal projection demonstrates that up to 80% of the total condylar reaction force is borne by the contralateral (balancing side) condyle during unilateral molar biting. A comparison of human, chimpanzee (P. troglodytes), spider monkey (A. belzebuth), and macaque (Macaca sp.) morphology indicates that the frugivorous chimpanzee and spider monkey have a relatively lower condylar reaction force than the omnivorous macaque or man during molar biting. The percentage reaction force during incisal biting is lower in man than in the other primates, and lower in the frugivorous primates than in the macaque.

Predicting bite force and cranial biomechanics in the largest fossil rodent using finite element analysis.

PubMed

Cox, Philip G; Rinderknecht, Andrés; Blanco, R Ernesto

2015-03-01

Josephoartigasia monesi, from the Pliocene of Uruguay, is the largest known fossil rodent, with an estimated body mass of 1000 kg. In this study, finite element analysis was used to estimate the maximum bite force that J. monesi could generate at the incisors and the cheek teeth. Owing to uncertainty in the model inputs, a sensitivity study was conducted in which the muscle forces and orientations were sequentially altered. This enabled conclusions to be drawn on the function of some of the masticatory muscles. It was found that J. monesi had a bite of 1389 N at the incisors, rising to 4165 N at the third molar. Varying muscle forces by 20% and orientations by 10° around the medio-lateral aspect led to an error in bite force of under 35% at each tooth. Predicted stresses across the skull were only minimally affected by changes to muscle forces and orientations, but revealed a reasonable safety factor in the strength of the skull. These results, combined with previous work, lead us to speculate that J. monesi was behaving in an elephant-like manner, using its incisors like tusks, and processing tough vegetation with large bite forces at the cheek teeth. © 2015 Anatomical Society.

Predicting bite force and cranial biomechanics in the largest fossil rodent using finite element analysis

PubMed Central

Cox, Philip G; Rinderknecht, Andrés; Blanco, R Ernesto

2015-01-01

Josephoartigasia monesi, from the Pliocene of Uruguay, is the largest known fossil rodent, with an estimated body mass of 1000 kg. In this study, finite element analysis was used to estimate the maximum bite force that J. monesi could generate at the incisors and the cheek teeth. Owing to uncertainty in the model inputs, a sensitivity study was conducted in which the muscle forces and orientations were sequentially altered. This enabled conclusions to be drawn on the function of some of the masticatory muscles. It was found that J. monesi had a bite of 1389 N at the incisors, rising to 4165 N at the third molar. Varying muscle forces by 20% and orientations by 10° around the medio-lateral aspect led to an error in bite force of under 35% at each tooth. Predicted stresses across the skull were only minimally affected by changes to muscle forces and orientations, but revealed a reasonable safety factor in the strength of the skull. These results, combined with previous work, lead us to speculate that J. monesi was behaving in an elephant-like manner, using its incisors like tusks, and processing tough vegetation with large bite forces at the cheek teeth. PMID:25652795

Jaw tremor as a physiological biomarker of bruxism.

PubMed

Laine, C M; Yavuz, Ş U; D'Amico, J M; Gorassini, M A; Türker, K S; Farina, D

2015-09-01

To determine if sleep bruxism is associated with abnormal physiological tremor of the jaw during a visually-guided bite force control task. Healthy participants and patients with sleep bruxism were given visual feedback of their bite force and asked to trace triangular target trajectories (duration=20s, peak force <35% maximum voluntary force). Bite force control was quantified in terms of the power spectra of force fluctuations, masseter EMG activity, and force-to-EMG coherence. Patients had greater jaw force tremor at ∼8 Hz relative to controls, along with increased masseter EMG activity and force-to-EMG coherence in the same frequency range. Patients also showed lower force-to-EMG coherence at low frequencies (<3 Hz), but greater coherence at high frequencies (20-40 Hz). Finally, patients had greater 6-10 Hz force tremor during periods of descending vs. ascending force, while controls showed no difference in tremor with respect to force dynamics. Patients with bruxism have abnormal jaw tremor when engaged in a visually-guided bite force task. Measurement of jaw tremor may aid in the detection/evaluation of bruxism. In light of previous literature, our results also suggest that bruxism is marked by abnormal or mishandled peripheral feedback from the teeth. Copyright © 2015. Published by Elsevier Ireland Ltd.

Fighting Against Disuse of the Masticatory System in Duchenne Muscular Dystrophy: A Pilot Study Using Chewing Gum.

PubMed

van Bruggen, H Willemijn; van den Engel-Hoek, Lenie; Steenks, Michel H; van der Bilt, Andries; Bronkhorst, Ewald M; Creugers, Nico H J; de Groot, Imelda J M; Kalaykova, Stanimira I

2015-10-01

Duchenne muscular dystrophy patients report masticatory problems. The aim was to determine the efficacy of mastication training in Duchenne muscular dystrophy using chewing gum for 4 weeks. In all, 17 patients and 17 healthy age-matched males participated. The masticatory performance was assessed using a mixing ability test and measuring anterior bite force before, shortly after and 1 month after the training. In the patient group the masticatory performance improved and remained after 1-month follow-up, no significant changes in anterior maximum bite force was observed after mastication training. In the healthy subject the bite force increased and remained at the 1-month follow-up; no significant differences in masticatory performance were observed. Mastication training by using sugar-free chewing gum in Duchenne muscular dystrophy patients improved their masticatory performance. Since bite force did not improve, the working mechanism of the improvement in chewing may relate to changes of the neuromuscular function and coordination, resulting in improvement of skills in performing mastication. © The Author(s) 2015.

Biomechanical implications of lateral pterygoid contribution to biting and jaw opening in humans.

PubMed

Osborn, J W

1995-12-01

The contributions of the lateral pterygoid muscle to a variety of different tasks were analysed by a linear programming mode based on the equations for static equilibrium in three dimensions and containing 12 muscles. The model was used to study lateral pterygoid activity at maximum bite force (MBF) for changes in (i) the direction and point of application of the bite force, (ii) the orientation of the masseter and medial pterygoid muscles and (iii) the slope of the articular eminence (glenoid slope). The effects on MBF of removing one or both lateral pterygoids were also examined. Lateral pterygoid provided a very important indirect contribution to some clenching forces. Under some conditions removing one lateral pterygoid muscle (simulating guarding an injured muscle) halved the MBF. Its activity at MBF was reduced as masseter was tilted more forward, the glenoid slope was made more horizontal and the bite force was made more vertical. The muscle helped to oppose (balance) the horizontal reaction forces at the bite point and joints, which potentially pushed the condyle backward. A balancing muscle is now defined as one (like lateral pterygoid) whose activity increases the output force by far more than its direct contribution to that force. In a larger model containing 16 muscles, every muscle was most active when its line of action was parallel to the output force. Finally, in a model which divided lateral pterygoid into superior and inferior heads, activity suddenly switched from the superior head to the inferior head when the angle of opening changed from 120 degrees (forward from the vertical) to 140 degrees.

Functional compartmentalization of the human superficial masseter muscle.

PubMed

Guzmán-Venegas, Rodrigo A; Biotti Picand, Jorge L; de la Rosa, Francisco J Berral

2015-01-01

Some muscles have demonstrated a differential recruitment of their motor units in relation to their location and the nature of the motor task performed; this involves functional compartmentalization. There is little evidence that demonstrates the presence of a compartmentalization of the superficial masseter muscle during biting. The aim of this study was to describe the topographic distribution of the activity of the superficial masseter (SM) muscle's motor units using high-density surface electromyography (EMGs) at different bite force levels. Twenty healthy natural dentate participants (men: 4; women: 16; age 20±2 years; mass: 60±12 kg, height: 163±7 cm) were selected from 316 volunteers and included in this study. Using a gnathodynamometer, bites from 20 to 100% maximum voluntary bite force (MVBF) were randomly requested. Using a two-dimensional grid (four columns, six electrodes) located on the dominant SM, EMGs in the anterior, middle-anterior, middle-posterior and posterior portions were simultaneously recorded. In bite ranges from 20 to 60% MVBF, the EMG activity was higher in the anterior than in the posterior portion (p-value = 0.001).The center of mass of the EMG activity was displaced towards the posterior part when bite force increased (p-value = 0.001). The topographic distribution of EMGs was more homogeneous at high levels of MVBF (p-value = 0.001). The results of this study show that the superficial masseter is organized into three functional compartments: an anterior, a middle and a posterior compartment. However, this compartmentalization is only seen at low levels of bite force (20-60% MVBF).

Functional Compartmentalization of the Human Superficial Masseter Muscle

PubMed Central

Guzmán-Venegas, Rodrigo A.; Biotti Picand, Jorge L.; de la Rosa, Francisco J. Berral

2015-01-01

Some muscles have demonstrated a differential recruitment of their motor units in relation to their location and the nature of the motor task performed; this involves functional compartmentalization. There is little evidence that demonstrates the presence of a compartmentalization of the superficial masseter muscle during biting. The aim of this study was to describe the topographic distribution of the activity of the superficial masseter (SM) muscle’s motor units using high-density surface electromyography (EMGs) at different bite force levels. Twenty healthy natural dentate participants (men: 4; women: 16; age 20±2 years; mass: 60±12 kg, height: 163±7 cm) were selected from 316 volunteers and included in this study. Using a gnathodynamometer, bites from 20 to 100% maximum voluntary bite force (MVBF) were randomly requested. Using a two-dimensional grid (four columns, six electrodes) located on the dominant SM, EMGs in the anterior, middle-anterior, middle-posterior and posterior portions were simultaneously recorded. In bite ranges from 20 to 60% MVBF, the EMG activity was higher in the anterior than in the posterior portion (p-value = 0.001).The center of mass of the EMG activity was displaced towards the posterior part when bite force increased (p-value = 0.001). The topographic distribution of EMGs was more homogeneous at high levels of MVBF (p-value = 0.001). The results of this study show that the superficial masseter is organized into three functional compartments: an anterior, a middle and a posterior compartment. However, this compartmentalization is only seen at low levels of bite force (20–60% MVBF). PMID:25692977

Fast and Powerful: Biomechanics and Bite Forces of the Mandibles in the American Cockroach Periplaneta americana

PubMed Central

Weihmann, Tom; Reinhardt, Lars; Weißing, Kevin; Siebert, Tobias; Wipfler, Benjamin

2015-01-01

Knowing the functionality and capabilities of masticatory apparatuses is essential for the ecological classification of jawed organisms. Nevertheless insects, especially with their outstanding high species number providing an overwhelming morphological diversity, are notoriously underexplored with respect to maximum bite forces and their dependency on the mandible opening angles. Aiming for a general understanding of insect biting, we examined the generalist feeding cockroach Periplaneta americana, characterized by its primitive chewing mouth parts. We measured active isometric bite forces and passive forces caused by joint resistance over the entire mandibular range with a custom-built 2D force transducer. The opening angle of the mandibles was quantified by using a video system. With respect to the effective mechanical advantage of the mandibles and the cross-section areas, we calculated the forces exerted by the mandible closer muscles and the corresponding muscle stress values. Comparisons with the scarce data available revealed close similarities of the cockroaches’ mandible closer stress values (58 N/cm2) to that of smaller specialist carnivorous ground beetles, but strikingly higher values than in larger stag beetles. In contrast to available datasets our results imply the activity of faster and slower muscle fibres, with the latter becoming active only when the animals chew on tough material which requires repetitive, hard biting. Under such circumstances the coactivity of fast and slow fibres provides a force boost which is not available during short-term activities, since long latencies prevent a specific effective employment of the slow fibres in this case. PMID:26559671

Alterations in the stomatognathic system due to amyotrophic lateral sclerosis.

PubMed

Gonçalves, Lígia Maria Napolitano; Palinkas, Marcelo; Hallak, Jaime Eduardo Cecilio; Marques Júnior, Wilson; Vasconcelos, Paulo Batista de; Frota, Nicolly Parente Ribeiro; Regalo, Isabela Hallak; Siéssere, Selma; Regalo, Simone Cecilio Hallak

2018-06-11

To compare the molar bite force, electromyographic activity, chewing efficiency and thickness of the masseter and temporalis muscles in individuals with amyotrophic lateral sclerosis (ALS) and healthy individuals. Thirty individuals enrolled in the study were divided into the study group (with ALS, n=15) and control group (healthy individuals, n=15). Data regarding molar bite force (right and left), electromyographic activity (mandibular rest, right and left laterality, protrusion, and maximum voluntary contraction), chewing efficiency (habitual and non-habitual), and masticatory muscle thickness (rest and maximum voluntary contraction) were tabulated and subjected to statistical analysis (Student's t-test, p≤0.05). Comparisons between the groups demonstrated a statistically significant increase in the electromyographic activity of the right masseter (p=0.03) and left masseter (p=0.03) muscles during mandibular rest; left masseter (p=0.00), right temporalis (p=0.00), and left temporalis (p=0.03) muscles during protrusion; and right masseter (p=0.00), left masseter (p=0.00), and left temporalis (p=0.00) muscles during left laterality, in individuals with ALS as compared with healthy individuals. A statistically significant decrease was observed in the habitual chewing efficiency of the right masseter (p=0.00) and right temporalis (p=0.04) muscles in individuals with ALS. No statistically significant difference between the groups was found the masticatory muscle thickness and maximal molar bite force. ALS may lead to modifications in the activities of the stomatognathic system, including muscular hyperactivity and reduction in chewing efficiency; however, no change has been observed in the masticatory muscle thickness and molar bite force.

Human feeding biomechanics: performance, variation, and functional constraints

PubMed Central

Dechow, Paul C.; Wang, Qian; Gharpure, Poorva H.; Baab, Karen L.; Smith, Amanda L.; Weber, Gerhard W.; Grosse, Ian R.; Ross, Callum F.; Richmond, Brian G.; Wright, Barth W.; Byron, Craig; Wroe, Stephen; Strait, David S.

2016-01-01

The evolution of the modern human (Homo sapiens) cranium is characterized by a reduction in the size of the feeding system, including reductions in the size of the facial skeleton, postcanine teeth, and the muscles involved in biting and chewing. The conventional view hypothesizes that gracilization of the human feeding system is related to a shift toward eating foods that were less mechanically challenging to consume and/or foods that were processed using tools before being ingested. This hypothesis predicts that human feeding systems should not be well-configured to produce forceful bites and that the cranium should be structurally weak. An alternate hypothesis, based on the observation that humans have mechanically efficient jaw adductors, states that the modern human face is adapted to generate and withstand high biting forces. We used finite element analysis (FEA) to test two opposing mechanical hypotheses: that compared to our closest living relative, chimpanzees (Pan troglodytes), the modern human craniofacial skeleton is (1) less well configured, or (2) better configured to generate and withstand high magnitude bite forces. We considered intraspecific variation in our examination of human feeding biomechanics by examining a sample of geographically diverse crania that differed notably in shape. We found that our biomechanical models of human crania had broadly similar mechanical behavior despite their shape variation and were, on average, less structurally stiff than the crania of chimpanzees during unilateral biting when loaded with physiologically-scaled muscle loads. Our results also show that modern humans are efficient producers of bite force, consistent with previous analyses. However, highly tensile reaction forces were generated at the working (biting) side jaw joint during unilateral molar bites in which the chewing muscles were recruited with bilateral symmetry. In life, such a configuration would have increased the risk of joint dislocation and constrained the maximum recruitment levels of the masticatory muscles on the balancing (non-biting) side of the head. Our results do not necessarily conflict with the hypothesis that anterior tooth (incisors, canines, premolars) biting could have been selectively important in humans, although the reduced size of the premolars in humans has been shown to increase the risk of tooth crown fracture. We interpret our results to suggest that human craniofacial evolution was probably not driven by selection for high magnitude unilateral biting, and that increased masticatory muscle efficiency in humans is likely to be a secondary byproduct of selection for some function unrelated to forceful biting behaviors. These results are consistent with the hypothesis that a shift to softer foods and/or the innovation of pre-oral food processing techniques relaxed selective pressures maintaining craniofacial features that favor forceful biting and chewing behaviors, leading to the characteristically small and gracile faces of modern humans. PMID:27547550

Chewing efficiency and maximum bite force with different attachment systems of implant overdentures: a crossover study.

PubMed

Elsyad, Moustafa Abdou; Khairallah, Ahmed Samir

2017-06-01

This crossover study aimed to evaluate and compare chewing efficiency and maximum bite force (MBF) with resilient telescopic and bar attachment systems of implant overdentures in patients with atrophied mandibles. Ten participants with severely resorbed mandibles and persistent denture problems received new maxillary and mandibular conventional dentures (control, CD). After 3 months of adaptation, two implants were inserted in canine region of the mandible. In a quasi-random method, overdentures were connected to the implants with either bar overdentures (BOD) or resilient telescopic overdentures (TOD) attachment systems. Chewing efficiency in terms of unmixed fraction (UF) was measured using chewing gum (after 5, 10, 20, 30 and 50 strokes), and MBF was measured using a bite force transducer. Measurements were performed 3 months after using each of the following prostheses: CD, BOD and TOD. Chewing efficiency and MBF increased significantly with BOD and TOD compared to CD. As the number of chewing cycles increased, the UF decreased. TOD recorded significant higher chewing efficiency and MBF than BOD. Resilient telescopic attachments are associated with increased chewing efficiency and MBF compared bar attachments when used to retain overdentures to the implants in patients with atrophied mandibles. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Fracture strength testing of crowns made of CAD/CAM composite resins.

PubMed

Okada, Ryota; Asakura, Masaki; Ando, Akihiro; Kumano, Hirokazu; Ban, Seiji; Kawai, Tatsushi; Takebe, Jun

2018-03-28

The purpose of this study was to ascertain whether computer aided design/computer aided manufacturing (CAD/CAM) composite resin crowns have sufficient strength to withstand the bite force of the molar teeth. The null hypothesis was that the fracture strength of CAD/CAM composite resin crowns is lower than the average maximum bite force of the molar tooth. The crowns, which shape is the right maxillary first molar, were fabricated using four CAD/CAM blanks made of composite resins (Block HC: HC, KZR-CAD HR: HR, KZR-CAD HR2: HR2, Avencia Block: AVE) and one CAD/CAM blank made of lithium disilicate glass-ceramic (IPS e.max CAD: IPS), which was used as a control. Fracture strength of fabricated crowns bonded to metal abutment and biaxial flexural strength of the materials were evaluated. The results of fracture strength test and biaxial flexural strength test showed different tendencies. The fracture strength of CAD/CAM composite resin crowns except HC ranged from 3.3kN to 3.9kN, and was similar to that of IPS (3.3kN). In contrast, biaxial flexural strength of CAD/CAM composite resins ranged from 175MPa to 247MPa, and was significantly lower than that of IPS (360MPa). All CAD/CAM composite resin crowns studied presented about 3-4 times higher fracture strength than the average maximum bite force of the molar tooth (700-900N), which result leads to the conclusion that CAD/CAM composite resin crowns would have sufficient strength to withstand the bite force of the molar teeth. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

The relationship between oral tori and bite force.

PubMed

Jeong, Chan-Woo; Kim, Kyung-Ho; Jang, Hyo-Won; Kim, Hye-Sun; Huh, Jong-Ki

2018-01-12

Objective The relationship between bite force and torus palatinus or mandibularis remains to be explained. The major aim of this study was to determine the correlation between bite force and oral tori. Methods The bite force of 345 patients was measured with a bite force recorder; impressions of the shape and size of the oral tori were taken on plaster models prior to orthodontic treatments. Subsequently, the relationship between oral tori and bite force was analyzed. Results The size, shape, and incidence of torus palatinus was not significantly correlated with bite force. However, the size of torus mandibularis increased significantly in proportion to the bite force (p = 0.020). The occurrence of different types of oral tori was not correlated with the bite force. Discussion The size of torus mandibularis provides information about bite force and can thus be used to clinically assess occlusal stress.

Bite Forces and Their Measurement in Dogs and Cats.

PubMed

Kim, Se Eun; Arzi, Boaz; Garcia, Tanya C; Verstraete, Frank J M

2018-01-01

Bite force is generated by the interaction of the masticatory muscles, the mandibles and maxillae, the temporomandibular joints (TMJs), and the teeth. Several methods to measure bite forces in dogs and cats have been described. Direct in vivo measurement of a bite in dogs has been done; however, bite forces were highly variable due to animal volition, situation, or specific measurement technique. Bite force has been measured in vivo from anesthetized dogs by electrical stimulation of jaw adductor muscles, but this may not be reflective of volitional bite force during natural activity. In vitro bite forces have been estimated by calculation of the force produced using mechanical equations representing the jaw adductor muscles and of the mandible and skull structure Bite force can be estimated in silico using finite element analysis (FEA) of the computed model of the anatomical structures. FEA can estimate bite force in extinct species; however, estimates may be lower than the measurements in live animals and would have to be validated specifically in domestic dogs and cats to be reliable. The main factors affecting the bite forces in dogs and cats are body weight and the skull's morphology and size. Other factors such as oral pain, TMJ disorders, masticatory muscle atrophy, and malocclusion may also affect bite force. Knowledge of bite forces in dogs and cats is essential for various clinical and research fields such as the development of implants, materials, and surgical techniques as well as for forensic medicine. This paper is a summary of current knowledge of bite forces in dogs and cats, including the effect of measurement methods and of other factors.

A novel sensor for bite force determinations.

PubMed

Fernandes, Cláudio P; Glantz, Per Olof J; Svensson, Stig A; Bergmark, Anders

2003-03-01

The clinical usefulness, accuracy and precision of a novel bite force sensor based on force sensing resistors were tested in six subjects wearing maxillary removable partial dentures retained by conical crowns. The surfaces of the sensor were manufactured in a silicone material that had mechanical properties similar to those of tough foodstuffs. In two separate series of standardized bite force tests, submaximum force levels were recorded with the sensor and with a strain gaged bite fork. Subjects were assisted in the loading tests with visual feedback instrumentation. Reliability estimates for the bite force sensor were calculated in order to show their reproducibility. Strain gages attached to the prostheses were used to determine the pattern of force distribution during loading tests. The bite force results obtained with the new bite force sensor and with the bite fork were analyzed with ANOVA and Scheffés tests. The strain patterns registered with strain gages were analyzed with F-test. The bite force sensor and the bite fork transducer showed no statistically significant differences in respect of intra-individual bite force levels (range 50-300N). The bite forces registered with the new sensor were dependent on the loading position (p<0.05), sex (p<0.05) and test subject (p<0.05). The reliability of the new sensor for submaximum bite forces was calculated to be 93%. Strain gage results showed that the new sensor generated strain patterns of less variance (p<0.05) than the bite fork and therefore allowed for higher precision during biting tests. The presented instrument has such clinical merits, as to favor its use in experimental clinical studies on the biomechanics of prosthetic appliances.

The anterior component of occlusal force revisited: direct measurement and theoretical considerations.

PubMed

Al Qassar, Sarmad S Salih; Mavragani, Maria; Psarras, Vasilis; Halazonetis, Demetrios J

2016-04-01

The anterior component of occlusal force (ACF), considered to result from the mesial inclination of teeth relative to the occlusal plane, has been estimated by indirectly measuring contact point tightness (CPT) through interproximal insertion of metal strips. ACF has been observed concurrently with a posterior component, whose theoretical origin is difficult to explain. Evaluate ACF by measuring CPT directly, and integrate current data to propose a theoretical basis for ACF. The sample comprised 14 females (age: 22.3±2.8) and 16 males (age: 20.8±2.5). Our device consisted of two force sensors: one for measuring maximum bite force (MBF) (overall thickness: 4mm), and one for measuring CPT directly (0.2mm thick), inserted between the lower first molar and second premolar. ACF was computed as the difference in CPT between the biting (at 75 per cent of MBF) and non-biting conditions. Averages of MBF, CPT, and ACF were 666.67 [standard deviation (SD): 36.06], 6.74 (SD: 1.17), and 20.59 (SD: 4.60) N, respectively. ACF, CPT, and MBF were higher in males by approximately 28, 18 and 7 per cent, respectively. A positive correlation was observed between ACF and MBF (R (2): 0.64). CPT was also significantly correlated to MBF (R (2): 0.40). Biomechanical analysis indicates that previously offered explanations do not unriddle the concurrent increase of CPT at anterior and posterior contact points. ACF was related to bite force by a logarithmic model. We speculate that CPT increases during biting through a combination of mesial tipping of teeth and mandibular bending. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Contribution of jaw muscle size and craniofacial morphology to human bite force magnitude.

PubMed

Raadsheer, M C; van Eijden, T M; van Ginkel, F C; Prahl-Andersen, B

1999-01-01

The existence of an interaction among bite force magnitude, jaw muscle size (e.g., cross-sectional area, thickness), and craniofacial morphology is widely accepted. Bite force magnitude depends on the size of the jaw muscles and the lever arm lengths of bite force and muscle forces, which in turn are dictated by craniofacial morphology. In this study, the relative contributions of craniofacial morphology and jaw muscle thickness to the bite force magnitude were studied. In 121 adult individuals, both magnitude and direction of the maximal voluntary bite force were registered. Craniofacial dimensions were measured by anthropometrics and from lateral radiographs. The thicknesses of the masseter, temporal, and digastric muscles were registered by ultrasonography. After a factor analysis was applied to the anthropometric and cephalometric dimensions, the correlation between bite force magnitude, on the one hand, and the "craniofacial factors" and jaw muscle thicknesses, on the other, was assessed by stepwise multiple regression. Fifty-eight percent of the bite force variance could be explained. From the jaw muscles, only the thickness of the masseter muscle correlated significantly with bite force magnitude. Bite force magnitude also correlated significantly positively with vertical and transverse facial dimensions and the inclination of the midface, and significantly negatively with mandibular inclination and occlusal plane inclination. The contribution of the masseter muscle to the variation in bite force magnitude was higher than that of the craniofacial factors.

Functional near-infrared spectroscopy study on primary motor and somatosensory cortex response to biting and finger clenching.

PubMed

Shibusawa, Mami; Takeda, Tomotaka; Nakajima, Kazunori; Jun, Handa; Sekiguchi, Shinichi; Ishigami, Keiichi; Sakatani, Kaoru

2010-01-01

The purpose of this study was to compare the influence of biting and finger clenching intensity on the concentration of oxygenated hemoglobin (OxyHb) in regional cerebral blood flow (rCBF) as an indicator of brain activity in the primary motor (MI) and somatosensory (SI) cortices. Functional near-infrared spectroscopy (fNIRS) was used in 8 healthy subjects. Subjects were required to do biting (bite) and finger clenching (fclench) at 20, 50 and 80% of maximum force. To minimize the effect of temporal muscle activity on the working side of the jaw, the fNIRS probes were positioned contralaterally, in the left temporal region. Activation of MI and SI cortices with bite and fclench was noted in all subjects, irrespective of the intensity of bite and fclench. A significant increase was observed in OxyHb in MI and SI between 20% and both 50 and 80% intensity. In MI cortex, OxyHb showed a significant increase between 80% and both 20 and 50% fclench intensity. The results suggest that intensity of bite and fclench influences activation levels in MI and SI. Further, an activation was more obvious with bite than fclench.

Comparison of immediate complete denture, tooth and implant-supported overdenture on vertical dimension and muscle activity

PubMed Central

Shah, Farhan Khalid; Gebreel, Ashraf; Elshokouki, Ali hamed; Habib, Ahmed Ali

2012-01-01

PURPOSE To compare the changes in the occlusal vertical dimension, activity of masseter muscles and biting force after insertion of immediate denture constructed with conventional, tooth-supported and Implant-supported immediate mandibular complete denture. MATERIALS AND METHODS Patients were selected and treatment was carried out with all the three different concepts i.e, immediate denture constructed with conventional (Group A), tooth-supported (Group B) and Implant-supported (Group C) immediate mandibular complete dentures. Parameters of evaluation and comparison were occlusal vertical dimension measured by radiograph (at three different time intervals), Masseter muscle electromyographic (EMG) measurement by EMG analysis (at three different positions of jaws) and bite force measured by force transducer (at two different time intervals). The obtained data were statistically analyzed by using ANOVA-F test at 5% level of significance. If the F test was significant, Least Significant Difference test was performed to test further significant differences between variables. RESULTS Comparison between mean differences in occlusal vertical dimension for tested groups showed that it was only statistically significant at 1 year after immediate dentures insertion. Comparison between mean differences in wavelet packet coefficients of the electromyographic signals of masseter muscles for tested groups was not significant at rest position, but significant at initial contact position and maximum voluntary clench position. Comparison between mean differences in maximum biting force for tested groups was not statistically significant at 5% level of significance. CONCLUSION Immediate complete overdentures whether tooth or implant supported prosthesis is recommended than totally mucosal supported prosthesis. PMID:22737309

Proximate determinants of bite force in Anolis lizards.

PubMed

Wittorski, Antoine; Losos, Jonathan B; Herrel, Anthony

2016-01-01

Performance measures associated with the vertebrate jaw system may provide important insights into vertebrate ecology and evolution because of their importance in many ecologically relevant tasks. Previous studies have shown that in many taxa, evolution toward higher bite force has gone hand in hand with the evolution of larger body size. However, independent of differences in overall body size, bite force may vary depending on head size and shape as well. Moreover, the underlying musculature may also drive variation in bite force. Here, we investigate the proximate determinants of bite force in lizards of the genus Anolis. We dissected the jaw muscles and quantified muscle mass, fibre length, and cross-sectional area. Data were analysed for both sexes independently given the sexual dimorphism detected in the dataset. Our results show that the traits that explain bite force are similar in both males and females with overall body size and muscle mass being the principal determinants. Among the different muscles examined, the adductor externus and the pseudotemporalis groups were the best determinants of bite force. However, models run for males predicted the variation in bite force better than models for females, suggesting that selection on morphology improving bite force may be stronger in males. © 2015 Anatomical Society.

Bite Force Recording Devices - A Review

PubMed Central

Kumathalli, Kanteshwari Iranagouda; Jain, Vinay; Kumar, Rajesh

2017-01-01

In dental research, bite force serves as a valuable parameter to evaluate the efficacy of masticatory system. A variety of devices with different design and working principle have been used to record bite force, but no single device is capable to record all the required forces. One may find it difficult to choose a device that will fulfil the purpose of recording bite force for research. So, the present review aims to report and compare the wide range of devices and will help in describing their uses for recording bite force. PMID:29207848

Feeding performance of king Mackerel, Scomberomorus cavalla.

PubMed

Ferguson, Amber R; Huber, Daniel R; Lajeunesse, Marc J; Motta, Philip J

2015-08-01

Feeding performance is an organism's ability to capture and handle prey. Although bite force is a commonly used metric of feeding performance, other factors such as bite pressure and strike speed are also likely to affect prey capture. Therefore, this study investigated static bite force, dynamic speeds, and predator and prey forces resulting from ram strikes, as well as bite pressure of the king mackerel, Scomberomorus cavalla, in order to examine their relative contributions to overall feeding performance. Theoretical posterior bite force ranged from 14.0-318.7 N. Ram speed, recorded with a rod and reel incorporated with a line counter and video camera, ranged from 3.3-15.8B L/s. Impact forces on the prey ranged from 0.1-1.9 N. Bite pressure, estimated using theoretical bite forces at three gape angles and tooth cross-sectional areas, ranged from 1.7-56.9 MPa. Mass-specific bite force for king mackerel is relatively low in comparison with other bony fishes and sharks, with relatively little impact force applied to the prey during the strike. This suggests that king mackerel rely on high velocity chases and high bite pressure generated via sharp, laterally compressed teeth to maximize feeding performance. © 2015 Wiley Periodicals, Inc.

Is extreme bite performance associated with extreme morphologies in sharks?

PubMed

Huber, Daniel R; Claes, Julien M; Mallefet, Jérôme; Herrel, Anthony

2009-01-01

As top predators in many oceanic communities, sharks are known to eat large prey and are supposedly able to generate high bite forces. This notion has, however, largely gone untested due to the experimental intractability of these animals. For those species that have been investigated, it remains unclear whether their high bite forces are simply a consequence of their large body size or the result of diet-related adaptation. As aquatic poikilotherms, sharks can grow very large, making them ideal subjects with which to investigate the effects of body size on bite force. Relative bite-force capacity is often associated with changes in head shape because taller or wider heads can, for example, accommodate larger jaw muscles. Constraints on bite force in general may also be released by changes in tooth shape. For example, more pointed teeth may allow a predator to penetrate prey more effectively than blunt, pavementlike teeth. Our analyses show that large sharks do not bite hard for their body size, but they generally have larger heads. Head width is the best predictor of bite force across the species included in our study as indicated by a multiple regression model. Contrary to our predictions, sharks with relatively high bite forces for their body size also have relatively more pointed teeth at the front of the tooth row. Moreover, species including hard prey in their diet are characterized by high bite forces and narrow and pointed teeth at the jaw symphysis.

Diet, bite force and skull morphology in the generalist rodent morphotype.

PubMed

Maestri, R; Patterson, B D; Fornel, R; Monteiro, L R; de Freitas, T R O

2016-11-01

For many vertebrate species, bite force plays an important functional role. Ecological characteristics of a species' niche, such as diet, are often associated with bite force. Previous evidence suggests a biomechanical trade-off between rodents specialized for gnawing, which feed mainly on seeds, and those specialized for chewing, which feed mainly on green vegetation. We tested the hypothesis that gnawers are stronger biters than chewers. We estimated bite force and measured skull and mandible shape and size in 63 genera of a major rodent radiation (the myomorph sigmodontines). Analysis of the influence of diet on bite force and morphology was made in a comparative framework. We then used phylogenetic path analysis to uncover the most probable causal relationships linking diet and bite force. Both granivores (gnawers) and herbivores (chewers) have a similar high bite force, leading us to reject the initial hypothesis. Path analysis reveals that bite force is more likely influenced by diet than the reverse causality. The absence of a trade-off between herbivores and granivores may be associated with the generalist nature of the myomorph condition seen in sigmodontine rodents. Both gnawing and chewing sigmodontines exhibit similar, intermediate phenotypes, at least compared to extreme gnawers (squirrels) and chewers (chinchillas). Only insectivorous rodents appear to be moving towards a different direction in the shape space, through some notable changes in morphology. In terms of diet, natural selection alters bite force through changes in size and shape, indicating that organisms adjust their bite force in tandem with changes in food items. © 2016 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2016 European Society For Evolutionary Biology.

Fiber Bragg Grating based bite force measurement.

PubMed

Umesh, Sharath; Padma, Srivani; Asokan, Sundarrajan; Srinivas, Talabattula

2016-09-06

The present study reports an in vivo, novel methodology for the dynamic measurement of the bite force generated by individual tooth using a Fiber Bragg Grating Bite Force Recorder (FBGBFR). Bite force is considered as one of the major indicators of the functional state of the masticatory system, which is dependent on the craniomandibular structure comprising functional components such as muscles of mastication, joints and teeth. The proposed FBGBFR is an intra-oral device, developed for the transduction of the bite force exerted at the occlusal surface, into strain variations on a base plate, which in turn is sensed by the FBG sensor bonded over it. The FBGBFR is calibrated against a Micro Universal Testing Machine (UTM) for 0-900N range and the resolution of the developed FBGBFR is found to be 0.54N. 36 volunteers (20 males and 16 females) performed the bite force measurement test at molar, premolar and incisor tooth on either side of the dental arch and the obtained results show clinically relevant bite forces varying from 176N to 635N. The bite forces obtained from the current study for a substantial sample size, show that the bite forces increases along the dental arch from the incisors towards the molars and are found to be higher in male than in female. The FBG sensor element utilized in FBGBFR is electrically passive, which makes it a safe in vivo intra-oral device. Hence the FBGBFR is viable to be employed in clinical studies on biomechanics of oral function. Copyright © 2016 Elsevier Ltd. All rights reserved.

Maintenance requirements associated with mandibular implant overdentures: clinical results after first year of service.

PubMed

Bilhan, Hakan; Geckili, Onur; Mumcu, Emre; Bilmenoglu, Caglar

2011-12-01

The aim of this clinical study was to evaluate the prosthodontic maintenance requirements during the first year of service of mandibular overdentures supported by interforaminal implants and to assess the influence of attachment type, implant number, and bite force on these requirements. Fifty-nine patients treated with mandibular implant overdentures between the years 2004 and 2009 and appearing in the 12th-month recall were included in this study. The overdentures constituted 4 groups: 2 single interforaminal implants (1 group with locator and 1 group with ball attachments), 3 single interforaminal implants, 3 splinted interforaminal implants (bar), and 4 splinted interforaminal implants (bar). During the examination, prosthetic parameters such as occlusion, tissue adaptation, condition of the retentive mechanism (matrice and patrice), and the condition of the denture-bearing tissues were evaluated and recorded. No statistically significant relation was found between attachment type, bite force values, implant number, and the occurring complications except the need for relining, which was found significantly more in the ball attachments than in other attachment groups (P  =  .03). After 12 months following the overdenture insertion, there seems to be no relation between occurring complications and patient-related factors, such as maximum bite force, age, and gender, as well as factors related to the overdentures such as number and type of attachments.

An Innovative Miniature Bite Force Recorder

PubMed Central

Utreja, Ashok K; Sandhu, Navreet; Dhaliwal, Yadvinder S

2011-01-01

In this study, a detailed description of development of a new novel bite force recorder (gnathodynamometer) using solid state components is vividly explained. This state of the art authenticated device can be used to assess the complex function of human bite force, which is the net resultant combination of functional response of various craniomandibular structures consisting of interrelated components, like the muscles of mastication, joints, teeth and the neuromuscular system. The consistency and accuracy of the bite force recorder was reaffirmed by doing a detailed laboratory calibration and clinical testing on 30 adult subjects. PMID:27672249

Feeding biomechanics of the cownose ray, Rhinoptera bonasus, over ontogeny

PubMed Central

Kolmann, Matthew A; Huber, Daniel R; Motta, Philip J; Grubbs, R Dean

2015-01-01

Growth affects the performance of structure, so the pattern of growth must influence the role of a structure and an organism. Because animal performance is linked to morphological specialization, ontogenetic change in size may influence an organism's biological role. High bite force generation is presumably selected for in durophagous taxa. Therefore, these animals provide an excellent study system for investigating biomechanical consequences of growth on performance. An ontogenetic series of 27 cownose rays (Rhinoptera bonasus) were dissected in order to develop a biomechanical model of the feeding mechanism, which was then compared with bite forces measured from live rays. Mechanical advantage of the feeding apparatus was generally conserved throughout ontogeny, while an increase in the mass and cross-sectional area of the jaw adductors resulted in allometric gains in bite force generation. Of primary importance to forceful biting in this taxon is the use of a fibrocartilaginous tendon associated with the insertion of the primary jaw adductor division. This tendon may serve to redirect muscle forces anteriorly, transmitting them within the plane of biting. Measured bite forces obtained through electrostimulation of the jaw adductors in live rays were higher than predicted, possibly due to differences in specific tension of actual batoid muscle and that used in the model. Mass-specific bite forces in these rays are the highest recorded for elasmobranchs. Cownose rays exemplify a species that, through allometric growth of bite performance and morphological novelties, have expanded their ecological performance over ontogeny. PMID:26183820

Influence of sustained submaximal clenching fatigue test on electromyographic activity and maximum voluntary bite forces in healthy subjects and patients with temporomandibular disorders.

PubMed

Xu, L; Fan, S; Cai, B; Fang, Z; Jiang, X

2017-05-01

This study aimed to investigate whether the fatigue induced by sustained motor task in the jaw elevator muscles differed between healthy subjects and patients with temporomandibular disorder (TMD). Fifteen patients with TMD and thirteen age- and sex-matched healthy controls performed a fatigue test consisting of sustained clenching contractions at 30% maximal voluntary clenching intensity until test failure (the criterion for terminating the fatigue test was when the biting force decreased by 10% or more from the target force consecutively for >3 s). The pre- and post-maximal bite forces (MBFs) were measured. Surface electromyographic signals were recorded from the superficial masseter muscles and anterior temporal muscles bilaterally, and the median frequency at the beginning, middle and end of the fatigue test was calculated. The duration of the fatigue test was also quantified. Both pre- and post-MBFs were lower in patients with TMD than in controls (P < 0·01). No significant difference was found in the percentage change in MBF between groups. The duration of the fatigue test in TMD patients was significantly shorter than that of the controls (P < 0·05). Our results suggest that, compared to healthy subjects, patients with TMD become more easily fatigued, but the electromyographic activation process during the fatigue test is similar between healthy subjects and patients with TMD. However, the mechanisms involved in this process remain unclear, and further research is warranted. © 2017 John Wiley & Sons Ltd.

Developing a musculoskeletal model of the primate skull: predicting muscle activations, bite force, and joint reaction forces using multibody dynamics analysis and advanced optimisation methods.

PubMed

Shi, Junfen; Curtis, Neil; Fitton, Laura C; O'Higgins, Paul; Fagan, Michael J

2012-10-07

An accurate, dynamic, functional model of the skull that can be used to predict muscle forces, bite forces, and joint reaction forces would have many uses across a broad range of disciplines. One major issue however with musculoskeletal analyses is that of muscle activation pattern indeterminacy. A very large number of possible muscle force combinations will satisfy a particular functional task. This makes predicting physiological muscle recruitment patterns difficult. Here we describe in detail the process of development of a complex multibody computer model of a primate skull (Macaca fascicularis), that aims to predict muscle recruitment patterns during biting. Using optimisation criteria based on minimisation of muscle stress we predict working to balancing side muscle force ratios, peak bite forces, and joint reaction forces during unilateral biting. Validation of such models is problematic; however we have shown comparable working to balancing muscle activity and TMJ reaction ratios during biting to those observed in vivo and that peak predicted bite forces compare well to published experimental data. To our knowledge the complexity of the musculoskeletal model is greater than any previously reported for a primate. This complexity, when compared to more simple representations provides more nuanced insights into the functioning of masticatory muscles. Thus, we have shown muscle activity to vary throughout individual muscle groups, which enables them to function optimally during specific masticatory tasks. This model will be utilised in future studies into the functioning of the masticatory apparatus. Copyright © 2012 Elsevier Ltd. All rights reserved.

Does pain in the masseter and anterior temporal muscles influence maximal bite force?

PubMed

Goiato, Marcelo Coelho; Zuim, Paulo Renato Junqueira; Moreno, Amália; Dos Santos, Daniela Micheline; da Silva, Emily Vivianne Freitas; de Caxias, Fernanda Pereira; Turcio, Karina Helga Leal

2017-11-01

The aim of this study was to evaluate changes in pain and muscle force, and the relationship between them, in patients with muscle pain and bruxism, prior to and after treatment. Thirty women with bruxism and myofascial pain (Ia) were included in this study. Sleep bruxism diagnosis was made based on clinical diagnostic criteria, and awake bruxism diagnosis was made by patient questionnaires and the presence of tooth wear. The diagnosis of myofascial pain was established according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC-TMD). Dentulous or partially edentulous patients (rehabilitated with conventional fixed prostheses) were included in the study according to the inclusion and exclusion criteria. The pain treatment protocol included occlusal splints, patient education, and physiotherapy for 30days. Bite force was measured using a dynamometer at the central incisor and the first molar regions on both sides. The exams were performed at baseline, after 7days, and 30days after treatment. The Wilcoxon test was used to compare patient pain level response among the periods analyzed in the study. Bite force data were submitted to two-way repeated-measures ANOVA, followed by the Tukey HSD test (p<0.05). A simple regression analysis was performed to verify the relation between pain level and bite force. Results revealed that there was a statistical difference in pain level over time for both muscles and sides (p<0.01). In the molar region, the bite force exhibited significantly higher values after 30days of treatment, when compared with the baseline (p<0.001). There was a correlation between pain level and bite force only for the temporal muscle in all periods analyzed (p<0.05). There was no strong correlation in the response level points to support the association of pain and bite force. Pain level decreased and bite force increased in the molar region after treatment. No strong correlation or dispersion in the relationship between pain levels and bite force was seen in women with myofascial pain and bruxism. Copyright © 2017 Elsevier Ltd. All rights reserved.

Interactive relationship between the mechanical properties of food and the human response during the first bite.

PubMed

Dan, Haruka; Kohyama, Kaoru

2007-05-01

Biting is an action that results from interplay between food properties and the masticatory system. The mechanical factors of food that cause biting adaptation and the recursive effects of modified biting on the mechanical phenomena of food are largely unknown. We examined the complex interaction between the bite system and the mechanical properties. Nine subjects were each given a cheese sample and instructed to bite it once with their molar teeth. An intra-oral bite force-time profile was measured using a tactile pressure-measurement system with a sheet sensor inserted between the molars. Time, force, and impulse for the first peak were specified as intra-oral parameters of the sample fracture. Mechanical properties of the samples were also examined using a universal testing machine at various test speeds. Besides fracture parameters, initial slope was also determined as a mechanical property possibly sensed shortly after bite onset. The bite profile was then examined based on the mechanical parameters. Sample-specific bite velocities were identified as characteristic responses of a human bite. A negative correlation was found between bite velocity and initial slope of the sample, suggesting that the initial slope is the mechanical factor that modifies the consequent bite velocity. The sample-specific bite velocity had recursive effects on the following fracture event, such that a slow velocity induced a low bite force and high impulse for the intra-oral fracture event. We demonstrated that examination of the physiological and mechanical factors during the first bite can provide valuable information about the food-oral interaction.

Maximal bite force, facial morphology and sucking habits in young children with functional posterior crossbite.

PubMed

Castelo, Paula Midori; Gavião, Maria Beatriz Duarte; Pereira, Luciano José; Bonjardim, Leonardo Rigoldi

2010-01-01

The maintenance of normal conditions of the masticatory function is determinant for the correct growth and development of its structures. Thus, the aims of this study were to evaluate the influence of sucking habits on the presence of crossbite and its relationship with maximal bite force, facial morphology and body variables in 67 children of both genders (3.5-7 years) with primary or early mixed dentition. The children were divided in four groups: primary-normocclusion (PN, n=19), primary-crossbite (PC, n=19), mixed-normocclusion (MN, n=13), and mixed-crossbite (MC, n=16). Bite force was measured with a pressurized tube, and facial morphology was determined by standardized frontal photographs: AFH (anterior face height) and BFW (bizygomatic facial width). It was observed that MC group showed lower bite force than MN, and AFH/BFW was significantly smaller in PN than PC (t-test). Weight and height were only significantly correlated with bite force in PC group (Pearson's correlation test). In the primary dentition, AFH/BFW and breast-feeding (at least six months) were positive and negatively associated with crossbite, respectively (multiple logistic regression). In the mixed dentition, breast-feeding and bite force showed negative associations with crossbite (univariate regression), while nonnutritive sucking (up to 3 years) associated significantly with crossbite in all groups (multiple logistic regression). In the studied sample, sucking habits played an important role in the etiology of crossbite, which was associated with lower bite force and long-face tendency.

Effect of Postnatal Myostatin Inhibition on Bite Mechanics in Mice.

PubMed

Williams, Susan H; Lozier, Nicholas R; Montuelle, Stéphane J; de Lacalle, Sonsoles

2015-01-01

As a negative regulator of muscle size, myostatin (Mstn) impacts the force-production capabilities of skeletal muscles. In the masticatory system, measures of temporalis-stimulated bite forces in constitutive myostatin KOs suggest an absolute, but not relative, increase in jaw-muscle force. Here, we assess the phenotypic and physiologic impact of postnatal myostatin inhibition on bite mechanics using an inducible conditional KO mouse in which myostatin is inhibited with doxycycline (DOX). Given the increased control over the timing of gene inactivation in this model, it may be more clinically-relevant for developing interventions for age-associated changes in the musculoskeletal system. DOX was administered for 12 weeks starting at age 4 months, during which time food intake was monitored. Sex, age and strain-matched controls were given the same food without DOX. Bite forces were recorded just prior to euthanasia after which muscle and skeletal data were collected. Food intake did not differ between control or DOX animals within each sex. DOX males were significantly larger and had significantly larger masseters than controls, but DOX and control females did not differ. Although there was a tendency towards higher absolute bite forces in DOX animals, this was not significant, and bite forces normalized to masseter mass did not differ. Mechanical advantage for incisor biting increased in the DOX group due to longer masseter moment arms, likely due to a more anteriorly-placed masseter insertion. Despite only a moderate increase in bite force in DOX males and none in DOX females, the increase in masseter mass in males indicates a potentially positive impact on jaw muscles. Our data suggest a sexual dimorphism in the role of mstn, and as such investigations into the sex-specific outcomes is warranted.

Teeth grinding, oral motor performance and maximal bite force in cerebral palsy children.

PubMed

Botti Rodrigues Santos, Maria Teresa; Duarte Ferreira, Maria Cristina; de Oliveira Guaré, Renata; Guimarães, Antonio Sergio; Lira Ortega, Adriana

2015-01-01

Identify whether the degree of oral motor performance is related to the presence of teeth grinding and maximal bite force values in children with spastic cerebral palsy. Ninety-five spastic cerebral palsy children with and without teeth grinding, according to caregivers' reports, were submitted to a comprehensive oral motor performance evaluation during the feeding process using the Oral Motor Assessment Scale. Maximal bite force was measured using an electronic gnathodynamometer. The teeth grinding group (n = 42) was younger, used anticonvulsant drugs, and was more frequently classified within the subfunctional oral motor performance category. Teeth grinding subfunctional spastic cerebral palsy children presented lower values of maximal bite force. The functional groups showing the presence or absence of teeth grinding presented higher values of maximal bite force compared with the subfunctional groups. In spastic cerebral palsy children, teeth grinding is associated with the worse oral motor performance. © 2015 Special Care Dentistry Association and Wiley Periodicals, Inc.

Novel Low-Cost Sensor for Human Bite Force Measurement

PubMed Central

Fastier-Wooller, Jarred; Phan, Hoang-Phuong; Dinh, Toan; Nguyen, Tuan-Khoa; Cameron, Andrew; Öchsner, Andreas; Dao, Dzung Viet

2016-01-01

This paper presents the design and development of a low cost and reliable maximal voluntary bite force sensor which can be manufactured in-house by using an acrylic laser cutting machine. The sensor has been designed for ease of fabrication, assembly, calibration, and safe use. The sensor is capable of use within an hour of commencing production, allowing for rapid prototyping/modifications and practical implementation. The measured data shows a good linear relationship between the applied force and the electrical resistance of the sensor. The output signal has low drift, excellent repeatability, and a large measurable range of 0 to 700 N. A high signal-to-noise response to human bite forces was observed, indicating the high potential of the proposed sensor for human bite force measurement. PMID:27509496

The relationship between facial skeleton morphology and bite force in people with a normal relation of the bases of jaws and skull.

PubMed

Sidorowicz, Ł; Szymańska, J

2015-01-01

Better knowledge on the relationship between craniofacial structure and bite force may serve as a reference point for prophylactic and therapeutic activities targeted at developmental age patients. The aim of the study was to assess the correlation between facial skeletal morphology and bite force. The study included 54 subjects aged 7-16 years with a normal relation of the bases of jaws and skull, according to Segner's and Hasund's analysis standards (ML-NL and ML-NSL angles values were 20.0 ± 7.0° and 28.0 ± 5.0°, respectively). The study group included patients who volunteered to diagnosis and possible orthodontic treatment. Bite force was tested with a digital dynamometer calibrated in Newtons. The measurement was performed at the level of the first permanent molars. Cephalometric analysis was based on lateral cephalometric radiographs. The vertical relations were assessed using the following measurements: ML-NSL, ML-NL, NL-NSL, N-Me, Sp-Me, SpMe:NMe, ms-NL, SGo:NMe. Bite force does not depend on the following factors: lower anterior face height (Sp-Me), lower anterior face height to total anterior face height ratio (SpMe:NMe), posterior to anterior face height ratio (SG0:NMe), and the value of ML-NL, ML-NSL and NL-NSL angles. The posterior height of the maxilla alveolar process (ms-NL) exerts the greatest influence on bite force in people with a normal relation of the bases of jaws and skull: with an increase in ms-NL value bite force is reduced.

Maximal bite force, facial morphology and sucking habits in young children with functional posterior crossbite

PubMed Central

CASTELO, Paula Midori; GAVIÃO, Maria Beatriz Duarte; PEREIRA, Luciano José; BONJARDIM, Leonardo Rigoldi

2010-01-01

Objective The maintenance of normal conditions of the masticatory function is determinant for the correct growth and development of its structures. Thus, the aims of this study were to evaluate the influence of sucking habits on the presence of crossbite and its relationship with maximal bite force, facial morphology and body variables in 67 children of both genders (3.5-7 years) with primary or early mixed dentition. Material and methods The children were divided in four groups: primary-normocclusion (PN, n=19), primary-crossbite (PC, n=19), mixed-normocclusion (MN, n=13), and mixed-crossbite (MC, n=16). Bite force was measured with a pressurized tube, and facial morphology was determined by standardized frontal photographs: AFH (anterior face height) and BFW (bizygomatic facial width). Results It was observed that MC group showed lower bite force than MN, and AFH/ BFW was significantly smaller in PN than PC (t-test). Weight and height were only significantly correlated with bite force in PC group (Pearson’s correlation test). In the primary dentition, AFH/BFW and breast-feeding (at least six months) were positive and negatively associated with crossbite, respectively (multiple logistic regression). In the mixed dentition, breastfeeding and bite force showed negative associations with crossbite (univariate regression), while nonnutritive sucking (up to 3 years) associated significantly with crossbite in all groups (multiple logistic regression). Conclusions In the studied sample, sucking habits played an important role in the etiology of crossbite, which was associated with lower bite force and long-face tendency. PMID:20485925

Feeding Kinematics, Suction, and Hydraulic Jetting Performance of Harbor Seals (Phoca vitulina)

PubMed Central

Marshall, Christopher D.; Wieskotten, Sven; Hanke, Wolf; Hanke, Frederike D.; Marsh, Alyssa; Kot, Brian; Dehnhardt, Guido

2014-01-01

The feeding kinematics, suction and hydraulic jetting capabilities of captive harbor seals (Phoca vitulina) were characterized during controlled feeding trials. Feeding trials were conducted using a feeding apparatus that allowed a choice between biting and suction, but also presented food that could be ingested only by suction. Subambient pressure exerted during suction feeding behaviors was directly measured using pressure transducers. The mean feeding cycle duration for suction-feeding events was significantly shorter (0.15±0.09 s; P<0.01) than biting feeding events (0.18±0.08 s). Subjects feeding in-water used both a suction and a biting feeding mode. Suction was the favored feeding mode (84% of all feeding events) compared to biting, but biting comprised 16% of feeding events. In addition, seals occasionally alternated suction with hydraulic jetting, or used hydraulic jetting independently, to remove fish from the apparatus. Suction and biting feeding modes were kinematically distinct regardless of feeding location (in-water vs. on-land). Suction was characterized by a significantly smaller gape (1.3±0.23 cm; P<0.001) and gape angle (12.9±2.02°), pursing of the rostral lips to form a circular aperture, and pursing of the lateral lips to occlude lateral gape. Biting was characterized by a large gape (3.63±0.21 cm) and gape angle (28.8±1.80°; P<0.001) and lip curling to expose teeth. The maximum subambient pressure recorded was 48.8 kPa. In addition, harbor seals were able to jet water at food items using suprambient pressure, also known as hydraulic jetting. The maximum hydraulic jetting force recorded was 53.9 kPa. Suction and hydraulic jetting where employed 90.5% and 9.5%, respectively, during underwater feeding events. Harbor seals displayed a wide repertoire of behaviorally flexible feeding strategies to ingest fish from the feeding apparatus. Such flexibility of feeding strategies and biomechanics likely forms the basis of their opportunistic, generalized feeding ecology and concomitant breadth of diet. PMID:24475170

Feeding kinematics, suction, and hydraulic jetting performance of harbor seals (Phoca vitulina).

PubMed

Marshall, Christopher D; Wieskotten, Sven; Hanke, Wolf; Hanke, Frederike D; Marsh, Alyssa; Kot, Brian; Dehnhardt, Guido

2014-01-01

The feeding kinematics, suction and hydraulic jetting capabilities of captive harbor seals (Phoca vitulina) were characterized during controlled feeding trials. Feeding trials were conducted using a feeding apparatus that allowed a choice between biting and suction, but also presented food that could be ingested only by suction. Subambient pressure exerted during suction feeding behaviors was directly measured using pressure transducers. The mean feeding cycle duration for suction-feeding events was significantly shorter (0.15±0.09 s; P<0.01) than biting feeding events (0.18±0.08 s). Subjects feeding in-water used both a suction and a biting feeding mode. Suction was the favored feeding mode (84% of all feeding events) compared to biting, but biting comprised 16% of feeding events. In addition, seals occasionally alternated suction with hydraulic jetting, or used hydraulic jetting independently, to remove fish from the apparatus. Suction and biting feeding modes were kinematically distinct regardless of feeding location (in-water vs. on-land). Suction was characterized by a significantly smaller gape (1.3±0.23 cm; P<0.001) and gape angle (12.9±2.02°), pursing of the rostral lips to form a circular aperture, and pursing of the lateral lips to occlude lateral gape. Biting was characterized by a large gape (3.63±0.21 cm) and gape angle (28.8±1.80°; P<0.001) and lip curling to expose teeth. The maximum subambient pressure recorded was 48.8 kPa. In addition, harbor seals were able to jet water at food items using suprambient pressure, also known as hydraulic jetting. The maximum hydraulic jetting force recorded was 53.9 kPa. Suction and hydraulic jetting where employed 90.5% and 9.5%, respectively, during underwater feeding events. Harbor seals displayed a wide repertoire of behaviorally flexible feeding strategies to ingest fish from the feeding apparatus. Such flexibility of feeding strategies and biomechanics likely forms the basis of their opportunistic, generalized feeding ecology and concomitant breadth of diet.

Extreme Postnatal Scaling in Bat Feeding Performance: A View of Ecomorphology from Ontogenetic and Macroevolutionary Perspectives.

PubMed

Santana, Sharlene E; Miller, Kimberly E

2016-09-01

Ecomorphology studies focus on understanding how anatomical and behavioral diversity result in differences in performance, ecology, and fitness. In mammals, the determinate growth of the skeleton entails that bite performance should change throughout ontogeny until the feeding apparatus attains its adult size and morphology. Then, interspecific differences in adult phenotypes are expected to drive food resource partitioning and patterns of lineage diversification. However, Formal tests of these predictions are lacking for the majority of mammal groups, and thus our understanding of mammalian ecomorphology remains incomplete. By focusing on a fundamental measure of feeding performance, bite force, and capitalizing on the extraordinary morphological and dietary diversity of bats, we discuss how the intersection of ontogenetic and macroevolutionary changes in feeding performance may impact ecological diversity in these mammals. We integrate data on cranial morphology and bite force gathered through longitudinal studies of captive animals and comparative studies of free-ranging individuals. We demonstrate that ontogenetic trajectories and evolutionary changes in bite force are highly dependent on changes in body and head size, and that bats exhibit dramatic, allometric increases in bite force during ontogeny. Interspecific variation in bite force is highly dependent on differences in cranial morphology and function, highlighting selection for ecological specialization. While more research is needed to determine how ontogenetic changes in size and bite force specifically impact food resource use and fitness in bats, interspecific diversity in cranial morphology and bite performance seem to closely match functional differences in diet. Altogether, these results suggest direct ecomorphological relationships at ontogenetic and macroevolutionary scales in bats. © The Author 2016. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email: journals.permissions@oup.com.

Differences in bite force between dolichofacial and brachyfacial individuals: Side of mastication, gender, weight and height.

PubMed

Quiudini, Paulo Roberto; Pozza, Daniel Humberto; Pinto, Ary Dos Santos; de Arruda, Mauricio Ferraz; Guimarães, Antonio Sergio

2017-07-01

Due to the bite force importance in functionality of the masticatory system, this study aimed to characterize it in dolichofacial and brachyfacial individuals. A sample comprised by 190 patients was divided into two groups: 90 severe dolichofacial, and 100 severe brachyfacial individuals classified according to the VERT index and the face height ratio (Jarabak quotient). Bite force was measured by using an adjusted digital dynamometer and proper methodology. The sample met the parametric assumptions and presented statistical significance when right and left sides of dolichofacial and brachyfacial individuals were compared. However, within the same group, no differences between the left and right sides were found. Generally, bite force was higher for male, left masticator, age between 41-50 years, weighing over 100kg and between 1.81 and 1.90m tall. Based on the results of this cross-sectional study, it was possible to conclude that the bite force in severe brachyfacial individuals was significantly higher than in severe dolichofacial individuals, being influenced by gender, weight and height. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Aggressive behavior and performance in the Tegu lizard Tupinambis merianae.

PubMed

Herrel, Anthony; Andrade, Denis V; de Carvalho, José Eduardo; Brito, Ananda; Abe, Augusto; Navas, Carlos

2009-01-01

Aggression is an important component of behavior in many animals and may be crucial to providing individuals with a competitive advantage when resources are limited. Although much is known about the effects of catecholamines and hormones on aggression, relatively few studies have examined the effects of physical performance on aggression. Here we use a large, sexually dimorphic teiid lizard to test whether individuals that show high levels of physical performance (bite force) are also more aggressive toward a potential threat (i.e., a human approaching the lizard). Our results show that independent of their sex, larger individuals with higher bite forces were indeed more aggressive. Moreover, our data show that individuals with higher bite forces tend to show decreased escape responses and are slower, providing evidence for a trade-off between fight and flight abilities. As bite force increased dramatically with body size, we suggest that large body size and bite force may reduce the threshold for an individual to engage in an aggressive encounter, allowing it to potentially gain or maintain resources and fight off predators while minimizing the risk of injury.

The importance of accurate muscle modelling for biomechanical analyses: a case study with a lizard skull

PubMed Central

Gröning, Flora; Jones, Marc E. H.; Curtis, Neil; Herrel, Anthony; O'Higgins, Paul; Evans, Susan E.; Fagan, Michael J.

2013-01-01

Computer-based simulation techniques such as multi-body dynamics analysis are becoming increasingly popular in the field of skull mechanics. Multi-body models can be used for studying the relationships between skull architecture, muscle morphology and feeding performance. However, to be confident in the modelling results, models need to be validated against experimental data, and the effects of uncertainties or inaccuracies in the chosen model attributes need to be assessed with sensitivity analyses. Here, we compare the bite forces predicted by a multi-body model of a lizard (Tupinambis merianae) with in vivo measurements, using anatomical data collected from the same specimen. This subject-specific model predicts bite forces that are very close to the in vivo measurements and also shows a consistent increase in bite force as the bite position is moved posteriorly on the jaw. However, the model is very sensitive to changes in muscle attributes such as fibre length, intrinsic muscle strength and force orientation, with bite force predictions varying considerably when these three variables are altered. We conclude that accurate muscle measurements are crucial to building realistic multi-body models and that subject-specific data should be used whenever possible. PMID:23614944

Coronoid process and residual ankylotic mass as an autograft in the management of ankylosis of the temporomandibular joint in young adolescent patients: a retrospective clinical investigation.

PubMed

Bansal, Vishal; Mowar, Apoorva; Dubey, Prajesh; Bhatnagar, Aditi; Bansal, Avi

2016-04-01

The aim of this non-randomised investigation was to assess the feasibility of using autogenous grafts (such as coronoid process and the resected ankylotic mass) in reconstruction of the condyle after gap arthroplasty for ankylosis of the temporomandibular joint (TMJ). Sixteen patients (23 joints) operated on between 2007 and 2009 were studied and postoperative measurements of maximum interincisal opening, bite force, range of movement, and infection were recorded. After a mean (SD) follow up of 55 (2.25) months mouth opening improved from 3 (3.84) mm to 33 (1.66) mm in patients treated with coronoid graft, while in patients treated with an ankylotic mass after a mean (SD) follow up of 58 (1.58) months it increased from 4 (2.64) mm to 26 (8.04) mm. Bite force six months postoperatively ranged from 18.25kg/cm(2) - 27.5kg/cm(2) after reconstruction with the coronoid process and 18.5kg/cm(2) - 23.25kg/cm(2) after reconstruction with the ankylotic mass. One patient developed reankylosis postoperatively and another developed infection, in both of which the ankylotic mass had been used. Both were managed successfully. Both the ankylotic mass and the coronoid process gave satisfactory results and seem to be options for reconstruction. However, the coronoid process graft was better than residual ankylotic mass in terms of masticatory efficiency, bite force, and range of movement. Copyright © 2016 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Peripheral, functional and postural asymmetries related to the preferred chewing side in adults with natural dentition.

PubMed

Rovira-Lastra, B; Flores-Orozco, E I; Ayuso-Montero, R; Peraire, M; Martinez-Gomis, J

2016-04-01

The aim of this cross-sectional study was to determine the preferred chewing side and whether chewing side preference is related to peripheral, functional or postural lateral preferences. One hundred and forty-six adults with natural dentition performed three masticatory assays, each consisting of five trials of chewing three pieces of silicon placed into a latex bag for 20 cycles, either freestyle or unilaterally on the right- or left-hand side. Occlusal contact area in the intercuspal position, maximum bite force, masticatory performance and cycle duration were measured and the lateral asymmetry of these variables was calculated. Laterality tests were performed to determine handedness, footedness, earedness and eyedness as functional preferences, and hand-clasping, arm-folding and leg-crossing as postural lateral preferences. The preferred chewing side was determined using three different methods: assessment of the first chewing cycle for each trial, calculation of the asymmetry index from all cycles and application of a visual analogue scale. Bivariate relationship and multiple linear regression analyses were performed. Among unilateral chewers, 77% of them preferred the right side for chewing. The factors most closely related to the preferred chewing side were asymmetry of bite force, asymmetry of masticatory performance and earedness, which explained up to 16% of the variance. Although several functional or postural lateral preferences seem to be related to the preferred chewing side, peripheral factors such as asymmetry of bite force and of masticatory performance are the most closely related to the preferred chewing side in adults with natural dentition. © 2015 John Wiley & Sons Ltd.

Bite force measurement system using pressure-sensitive sheet and silicone impression material.

PubMed

Ando, Katsuya; Fuwa, Yuji; Kurosawa, Masahiro; Kondo, Takamasa; Goto, Shigemi

2009-03-01

This study was conducted to reduce the bias in measured values caused by the thickness of materials used in occlusal examinations. To this end, a silicone impression material for bite force measurement and an experimental model of a simplified stomatognathic system were employed in this study. By means of this experimental model, results showed that the effect of bias toward the posterior arch could be reduced in the anterior-posterior distribution of bite forces and in the occlusal contact areas due to the thickness of the materials used in occlusal examinations.

Unmasking the Effect of Analgesics on Endodontic Diagnosis Using a Novel Bite Force Sensor Device: A Prospective, Randomized Clinical Trial.

PubMed

Kishnani, Sushil; Saha, Suparna Ganguly; Bhardwaj, Anuj; Dubey, Sandeep; Saha, Mainak; Kala, Shubham; Jain, Sohini; Narwani, Shweta

2016-10-01

A definitive diagnosis is of primary importance before initiating any endodontic treatment; yet, there are occasions when the dental professional is unable to accurately reproduce the patient's chief complaint, as it can pose a dilemma and may require consideration of multiple variables in order to reach an accurate diagnosis. So to overcome this problem, a methodical approach in providing endodontic treatment should be implemented which includes diagnosis, definitive dental treatment and adjunctive drug therapy, known as the "3D" strategy. The purpose of this study was to evaluate the possible "masking" effect of these analgesics on endodontic diagnosis using a novel bite force sensor device. A total of 90 patients with endodontic pain were selected and they were given either a placebo or 400 mg ibuprofen (brufen) or 50mg diclofenac sodium (voveron). Both patients and operators were completely blinded to the drugs administered. Bite force tolerance values were noted before and one hour after administration of medication using the self designed bite force sensor. The pre- and post-bite force tolerance values were tabulated for both contralateral and affected tooth. For the affected tooth, there was statistically significant difference between pre- and post-bite force tolerance values in Group I (i.e., ibuprofen) and Group II (i.e., diclofenac sodium) (p<0.05) with no significant difference observed in Group III (placebo). The easily available over the counter self administered analgesics in addition to providing symptomatic relief to patients suffering from symptomatic apical periodontitis may also cloud the definitive diagnosis of the clinician, thus jeopardising the treatment plan. The self designed bite force sensor was effective in arriving at a definitive diagnosis in teeth with chronic irreversible pulpitis with symptomatic apical periodontitis, where the allodynia has been camouflaged by the use of analgesics like ibuprofen and diclofenac sodium.

A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation.

PubMed

Ackland, David C; Robinson, Dale; Redhead, Michael; Lee, Peter Vee Sin; Moskaljuk, Adrian; Dimitroulis, George

2017-05-01

Personalized prosthetic joint replacements have important applications in cases of complex bone and joint conditions where the shape and size of off-the-shelf components may not be adequate. The objective of this study was to design, test and fabricate a personalized 3D-printed prosthesis for a patient requiring total joint replacement surgery of the temporomandibular joint (TMJ). The new 'Melbourne' prosthetic TMJ design featured a condylar component sized specifically to the patient and fixation screw positions that avoid potential intra-operative damage to the mandibular nerve. The Melbourne prosthetic TMJ was developed for a 58-year-old female recipient with end-stage osteoarthritis of the TMJ. The load response of the prosthesis during chewing and a maximum-force bite was quantified using a personalized musculoskeletal model of the patient's masticatory system developed using medical images. The simulations were then repeated after implantation of the Biomet Microfixation prosthetic TMJ, an established stock device. The maximum condylar stresses, screw stress and mandibular stress at the screw-bone interface were lower in the Melbourne prosthetic TMJ (259.6MPa, 312.9MPa and 198.4MPa, respectively) than those in the Biomet Microfixation device (284.0MPa, 416.0MPa and 262.2MPa, respectively) during the maximum-force bite, with similar trends also observed during the chewing bite. After trialing surgical placement and evaluating prosthetic TMJ stability using cadaveric specimens, the prosthesis was fabricated using 3D printing, sterilized, and implanted into the female recipient. Six months post-operatively, the prosthesis recipient had a normal jaw opening distance (40.0 mm), with no complications identified. The new design features and immediate load response of the Melbourne prosthetic TMJ suggests that it may provide improved clinical and biomechanical joint function compared to a commonly used stock device, and reduce risk of intra-operative nerve damage during placement. The framework presented may be useful for designing and testing customized devices for the treatment of debilitating bone and joint conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

The craniomandibular mechanics of being human

PubMed Central

Wroe, Stephen; Ferrara, Toni L.; McHenry, Colin R.; Curnoe, Darren; Chamoli, Uphar

2010-01-01

Diminished bite force has been considered a defining feature of modern Homo sapiens, an interpretation inferred from the application of two-dimensional lever mechanics and the relative gracility of the human masticatory musculature and skull. This conclusion has various implications with regard to the evolution of human feeding behaviour. However, human dental anatomy suggests a capacity to withstand high loads and two-dimensional lever models greatly simplify muscle architecture, yielding less accurate results than three-dimensional modelling using multiple lines of action. Here, to our knowledge, in the most comprehensive three-dimensional finite element analysis performed to date for any taxon, we ask whether the traditional view that the bite of H. sapiens is weak and the skull too gracile to sustain high bite forces is supported. We further introduce a new method for reconstructing incomplete fossil material. Our findings show that the human masticatory apparatus is highly efficient, capable of producing a relatively powerful bite using low muscle forces. Thus, relative to other members of the superfamily Hominoidea, humans can achieve relatively high bite forces, while overall stresses are reduced. Our findings resolve apparently discordant lines of evidence, i.e. the presence of teeth well adapted to sustain high loads within a lightweight cranium and mandible. PMID:20554545

Investigation of mucosa-induced residual ridge resorption under implant-retained overdentures and complete dentures in the mandible.

PubMed

Ahmad, Rohana; Chen, Junning; Abu-Hassan, Mohamed I; Li, Qing; Swain, Michael V

2015-01-01

This study aimed to investigate and compare the residual ridge resorption (RRR) induced by an implant-retained overdenture (IRO) and associative biomechanics and by a conventional complete denture (CD) without implants. Cone beam computed tomography was used to quantify RRR in a three-dimensional (3D) manner before and after 1 year of treatment with either IROs or CDs. Twenty patients were treated with IROs, and nine patients were treated with CDs in the mandible. Their maximum bite forces were recorded. The same sets of high-resolution scan images were used to create patient-specific 3D finite element analysis models. The hydrostatic stresses, contact surface deformation, and strain energy absorption in soft tissue mucosa were correlated with the changes in RRR for patients with and without implants. With the IROs, contact surface deformation on the mucosa was two times greater than with CDs (0.32 ± 0.23 mm vs 0.16 ± 0.06 mm) and was in agreement with the amount of RRR measured, which was also two times higher for the IRO than the CD (-3.8% ± 4.5% vs -1.9% ± 0.4%). Taking into account the differences in bite forces with and without implants, which again were twice as high with IROs, the hydrostatic stress within the mucosa was found to correlate well to the RRR map measured over the 1-year interval of treatment. IROs resulted in at least twice the RRR as CDs. This could be caused by the higher hydrostatic stress and less effective energy absorption capabilities of the mucosa underneath the IRO. While implants associated with the IRO provide stronger bite force, they could potentially concentrate hydrostatic stress and cause greater RRR compared to a conventional CD.

The biting performance of Homo sapiens and Homo heidelbergensis.

PubMed

Godinho, Ricardo Miguel; Fitton, Laura C; Toro-Ibacache, Viviana; Stringer, Chris B; Lacruz, Rodrigo S; Bromage, Timothy G; O'Higgins, Paul

2018-05-01

Modern humans have smaller faces relative to Middle and Late Pleistocene members of the genus Homo. While facial reduction and differences in shape have been shown to increase biting efficiency in Homo sapiens relative to these hominins, facial size reduction has also been said to decrease our ability to resist masticatory loads. This study compares crania of Homo heidelbergensis and H. sapiens with respect to mechanical advantages of masticatory muscles, force production efficiency, strains experienced by the cranium and modes of deformation during simulated biting. Analyses utilize X-ray computed tomography (CT) scan-based 3D models of a recent modern human and two H. heidelbergensis. While having muscles of similar cross-sectional area to H. heidelbergensis, our results confirm that the modern human masticatory system is more efficient at converting muscle forces into bite forces. Thus, it can produce higher bite forces than Broken Hill for equal muscle input forces. This difference is the result of alterations in relative in and out-lever arm lengths associated with well-known differences in midfacial prognathism. Apparently at odds with this increased efficiency is the finding that the modern human cranium deforms more, resulting in greater strain magnitudes than Broken Hill when biting at the equivalent tooth. Hence, the facial reduction that characterizes modern humans may not have evolved as a result of selection for force production efficiency. These findings provide further evidence for a degree of uncoupling between form and function in the masticatory system of modern humans. This may reflect the impact of food preparation technologies. These data also support previous suggestions that differences in bite force production efficiency can be considered a spandrel, primarily driven by the midfacial reduction in H. sapiens that occurred for other reasons. Midfacial reduction plausibly resulted in a number of other significant changes in morphology, such as the development of a chin, which has itself been the subject of debate as to whether or not it represents a mechanical adaptation or a spandrel. Copyright © 2018 Elsevier Ltd. All rights reserved.

The Effect of Varying Biting Position on Relative Jaw Muscle EMG activity

DTIC Science & Technology

1988-09-01

with muscle force is the key to 13 this approach as it allows inference of muscle contraction activity from EMG data. This relationship has been the...5! 15 LITERATURE REVIEW Introduction: The study of the physiology of bite force, muscle contraction force, joint reaction force and the lever system...Currently, the best method of indirectly observing muscle contraction activity is through electromyography. Although there appears to be a time delay

Phantom bite: a real or a phantom diagnosis? A case report.

PubMed

Sutter, Ben A

2017-01-01

This case report describes computer-guided occlusal therapy in a patient who met the unified diagnostic criteria for phantom bite. After a review of the patient's medical history, along with a diagnostic work-up that included cone beam computed tomography, temporomandibular joint vibration analysis, and digital occlusal analysis, problematic dental components were discovered (including prolonged disclusion time and imbalanced bite force). A digital occlusal analyzer evaluated the patient's occlusion and systematically guided the necessary changes. After reduction of the disclusion time and correction of the occlusal force imbalance, the patient reported significant improvement in comfort. The results suggest that phantom bite could be an abnormal occlusal condition and not a psychological or neurologic somatoform disorder.

[Features of facioscapulohumeral muscular dystrophy in oral and maxillofacial region and MRI analysis of facial muscles].

PubMed

Liu, Y H; Ma, Y X; Hu, J; Gao, G D; Wu, Y K; Zhang, Z Y

2016-12-09

Objective: To investigate the manifestation of facioscapulohumeral muscular dystrophy (FSHD) in oral and maxillofacial region. Methods: A total of 12 patients diagnosed as FSHD and 20 healthy volunteers were included in the study. Their medical history was collected from these patients. The decayed missing filled teeth (DMFT), calculus index-simplified (CI-S), occlusal relationship, maximal opening of mouth and maximum bite force were recorded. The impressions were taken to measure the maximal hight of palate and the width of palate. The lateral cephalometric radiographs were also taken to measure the mandibular plane-frankfurt horizontal plane angle (MP-FH). They finally received oral and maxillofacial region MRI examination to observe the masseter muscle, medial pterygoid muscle and lateral pterygoid muscle. The data were analyzed by t -test or Wilcoxon signed ranks test. Results: There was no significant gender difference in FSHD group. The average age of treatment was (27.5 ± 8.1) years and the average age of onset was (15.7±7.5) years. Nine patients liked to eat soft foods, 4 patients had difficulties of closing eyes, 8 patients had difficulties of cheek-bulging, 10 patients showed pouty lips and 9 patients had mesio-malocclusion. DMFT (4.0±2.3), CI-S (5.8±2.1), male maximal hight of palate (20.5±2.1) mm , female maximal hight of palate (17.9±1.6) mm, MP-FH (31.8°±2.2°) of FSHD group were greater than those of the control group. Male width of palate (34.8±1.4) mm, female width of palate (33.7±1.5) mm, male maximum bite force (451.7 ± 39.0) N, female maximum bite force (326.7 ± 21.6) N, maximal opening of mouth (3.5 ± 0.4) cm of FSHD group were less than those of the control group ( P <0.05). Maxillofacial MRI showed muscle asymmetr in 11 cases of masseter and 6 cases of medial pterygoid muscle, 5 cases of lateral pterygoid, and these muscle showed mild fatty infiltration mainly concentrating in the grade 0, grade 1 and grade 2. Conclusions: The FSHD patients have poor oral hygiene, low masticatory function, limited mouth opening, high palate and narrow arch and different degree of malocclusion. The patients' masseter muscle, medial pterygoid muscles and lateral pterygoid muscles exhibit asymmetrical atrophy and fatty infiltration.

Mandibular kinematic changes after unilateral cross-bite with lateral shift correction.

PubMed

Venancio, F; Alarcon, J A; Lenguas, L; Kassem, M; Martin, C

2014-10-01

The aim of this randomised prospective study was to evaluate the effects of slow maxillary expansion with expansion plates and Hyrax expanders on the kinematics of the mandible after cross-bite correction. Thirty children (15 boys and 15 girls), aged 7·1-11·8, with unilateral cross-bite and functional shift were divided into two groups: expansion plate (n = 15) and Hyrax expander (n = 15). Thirty children with normal occlusion (14 boys and 16 girls, aged 7·3-11·6) served as control group. The maximum vertical opening, lateral mandibular shift (from maximum vertical opening to maximum intercuspation, from rest position to maximum intercuspation and from maximum vertical opening to rest position) and lateral excursions were recorded before and 4 months after treatment. After treatment, the expansion plate group showed a greater lateral shift from rest position to maximum intercuspation than did the control group. The expansion plate patients also presented greater left/contralateral excursion than did the control group. Comparisons of changes after treatment in the cross-bite groups showed significant decreases in the lateral shift from the maximum vertical opening to maximum intercuspation and from the maximum vertical opening to rest position, a significant increase in the homolateral excursion and a significant decrease in the contralateral excursion in the Hyrax expander group, whereas no significant differences were found in the expansion plate group. In conclusion, the Hyrax expander showed better results than did the expansion plate. The Hyrax expander with acrylic occlusal covering significantly improved the mandibular lateral shift and normalised the range of lateral excursion. © 2014 John Wiley & Sons Ltd.

Tooth eruption results from bone remodelling driven by bite forces sensed by soft tissue dental follicles: a finite element analysis.

PubMed

Sarrafpour, Babak; Swain, Michael; Li, Qing; Zoellner, Hans

2013-01-01

Intermittent tongue, lip and cheek forces influence precise tooth position, so we here examine the possibility that tissue remodelling driven by functional bite-force-induced jaw-strain accounts for tooth eruption. Notably, although a separate true 'eruptive force' is widely assumed, there is little direct evidence for such a force. We constructed a three dimensional finite element model from axial computerized tomography of an 8 year old child mandible containing 12 erupted and 8 unerupted teeth. Tissues modelled included: cortical bone, cancellous bone, soft tissue dental follicle, periodontal ligament, enamel, dentine, pulp and articular cartilage. Strain and hydrostatic stress during incisive and unilateral molar bite force were modelled, with force applied via medial and lateral pterygoid, temporalis, masseter and digastric muscles. Strain was maximal in the soft tissue follicle as opposed to surrounding bone, consistent with follicle as an effective mechanosensor. Initial numerical analysis of dental follicle soft tissue overlying crowns and beneath the roots of unerupted teeth was of volume and hydrostatic stress. To numerically evaluate biological significance of differing hydrostatic stress levels normalized for variable finite element volume, 'biological response units' in Nmm were defined and calculated by multiplication of hydrostatic stress and volume for each finite element. Graphical representations revealed similar overall responses for individual teeth regardless if incisive or right molar bite force was studied. There was general compression in the soft tissues over crowns of most unerupted teeth, and general tension in the soft tissues beneath roots. Not conforming to this pattern were the unerupted second molars, which do not erupt at this developmental stage. Data support a new hypothesis for tooth eruption, in which the follicular soft tissues detect bite-force-induced bone-strain, and direct bone remodelling at the inner surface of the surrounding bony crypt, with the effect of enabling tooth eruption into the mouth.

Mechanics of biting in great white and sandtiger sharks.

PubMed

Ferrara, T L; Clausen, P; Huber, D R; McHenry, C R; Peddemors, V; Wroe, S

2011-02-03

Although a strong correlation between jaw mechanics and prey selection has been demonstrated in bony fishes (Osteichthyes), how jaw mechanics influence feeding performance in cartilaginous fishes (Chondrichthyes) remains unknown. Hence, tooth shape has been regarded as a primary predictor of feeding behavior in sharks. Here we apply Finite Element Analysis (FEA) to examine form and function in the jaws of two threatened shark species, the great white (Carcharodon carcharias) and the sandtiger (Carcharias taurus). These species possess characteristic tooth shapes believed to reflect dietary preferences. We show that the jaws of sandtigers and great whites are adapted for rapid closure and generation of maximum bite force, respectively, and that these functional differences are consistent with diet and dentition. Our results suggest that in both taxa, insertion of jaw adductor muscles on a central tendon functions to straighten and sustain muscle fibers to nearly orthogonal insertion angles as the mouth opens. We argue that this jaw muscle arrangement allows high bite forces to be maintained across a wider range of gape angles than observed in mammalian models. Finally, our data suggest that the jaws of sub-adult great whites are mechanically vulnerable when handling large prey. In addition to ontogenetic changes in dentition, further mineralization of the jaws may be required to effectively feed on marine mammals. Our study is the first comparative FEA of the jaws for any fish species. Results highlight the potential of FEA for testing previously intractable questions regarding feeding mechanisms in sharks and other vertebrates. Copyright © 2010 Elsevier Ltd. All rights reserved.

Tooth Eruption Results from Bone Remodelling Driven by Bite Forces Sensed by Soft Tissue Dental Follicles: A Finite Element Analysis

PubMed Central

Sarrafpour, Babak; Swain, Michael; Li, Qing; Zoellner, Hans

2013-01-01

Intermittent tongue, lip and cheek forces influence precise tooth position, so we here examine the possibility that tissue remodelling driven by functional bite-force-induced jaw-strain accounts for tooth eruption. Notably, although a separate true ‘eruptive force’ is widely assumed, there is little direct evidence for such a force. We constructed a three dimensional finite element model from axial computerized tomography of an 8 year old child mandible containing 12 erupted and 8 unerupted teeth. Tissues modelled included: cortical bone, cancellous bone, soft tissue dental follicle, periodontal ligament, enamel, dentine, pulp and articular cartilage. Strain and hydrostatic stress during incisive and unilateral molar bite force were modelled, with force applied via medial and lateral pterygoid, temporalis, masseter and digastric muscles. Strain was maximal in the soft tissue follicle as opposed to surrounding bone, consistent with follicle as an effective mechanosensor. Initial numerical analysis of dental follicle soft tissue overlying crowns and beneath the roots of unerupted teeth was of volume and hydrostatic stress. To numerically evaluate biological significance of differing hydrostatic stress levels normalized for variable finite element volume, ‘biological response units’ in Nmm were defined and calculated by multiplication of hydrostatic stress and volume for each finite element. Graphical representations revealed similar overall responses for individual teeth regardless if incisive or right molar bite force was studied. There was general compression in the soft tissues over crowns of most unerupted teeth, and general tension in the soft tissues beneath roots. Not conforming to this pattern were the unerupted second molars, which do not erupt at this developmental stage. Data support a new hypothesis for tooth eruption, in which the follicular soft tissues detect bite-force-induced bone-strain, and direct bone remodelling at the inner surface of the surrounding bony crypt, with the effect of enabling tooth eruption into the mouth. PMID:23554928

Novel System for Bite-Force Sensing and Monitoring Based on Magnetic Near Field Communication

PubMed Central

Lantada, Andres Diaz; Bris, Carlos González; Morgado, Pilar Lafont; Maudes, Jesús Sanz

2012-01-01

Intraoral devices for bite-force sensing have several applications in odontology and maxillofacial surgery, as bite-force measurements provide additional information to help understand the characteristics of bruxism disorders and can also be of help for the evaluation of post-surgical evolution and for comparison of alternative treatments. A new system for measuring human bite forces is proposed in this work. This system has future applications for the monitoring of bruxism events and as a complement for its conventional diagnosis. Bruxism is a pathology consisting of grinding or tight clenching of the upper and lower teeth, which leads to several problems such as lesions to the teeth, headaches, orofacial pain and important disorders of the temporomandibular joint. The prototype uses a magnetic field communication scheme similar to low-frequency radio frequency identification (RFID) technology (NFC). The reader generates a low-frequency magnetic field that is used as the information carrier and powers the sensor. The system is notable because it uses an intra-mouth passive sensor and an external interrogator, which remotely records and processes information regarding a patient's dental activity. This permits a quantitative assessment of bite-force, without requiring intra-mouth batteries, and can provide supplementary information to polysomnographic recordings, current most adequate early diagnostic method, so as to initiate corrective actions before irreversible dental wear appears. In addition to describing the system's operational principles and the manufacture of personalized prototypes, this report will also demonstrate the feasibility of the system and results from the first in vitro and in vivo trials. PMID:23112669

The impact of gape on the performance of the skull in chisel-tooth digging and scratch digging mole-rats (Rodentia: Bathyergidae).

PubMed

McIntosh, Andrew F; Cox, Philip G

2016-10-01

The African mole-rats (Bathyergidae) are a family of rodents highly adapted for life underground. Previous research has shown that chisel-tooth digging mole-rats (which use their incisors to dig burrows) are clearly distinguishable from scratch diggers (which only use the forelimbs to tunnel) on the basis of morphology of the skull, and that the differences are linked to the production of high bite forces and wide gapes. We hypothesized that the skull of a chisel-tooth digging mole-rat would perform better at wider gapes than that of a scratch digging mole-rat during incisor biting. To test this hypothesis, we created finite-element models of the cranium of the scratch digging Bathyergus suillus and the chisel-tooth digging Fukomys mechowii , and loaded them to simulate incisor bites at different gapes. Muscle loads were scaled such that the ratio of force to surface area was the same in both models. We measured three performance variables: overall stress across the cranium, mechanical efficiency of biting and degree of deformation across the skull. The Fukomys model had a more efficient incisor bite at all gapes, despite having greater average stress across the skull. In addition, the Fukomys model deformed less at wider gapes, whereas the Bathyergus model deformed less at narrower gapes. These properties of the cranial morphology of Fukomys and Bathyergus are congruent with their respective chisel-tooth and scratch digging behaviours and, all other factors being equal, would enable the more efficient production of bite force at wider gapes in Fukomys . However, in vivo measurements of muscle forces and activation patterns are needed to fully understand the complex biomechanics of tooth digging.

The impact of gape on the performance of the skull in chisel-tooth digging and scratch digging mole-rats (Rodentia: Bathyergidae)

NASA Astrophysics Data System (ADS)

McIntosh, Andrew F.; Cox, Philip G.

2016-10-01

The African mole-rats (Bathyergidae) are a family of rodents highly adapted for life underground. Previous research has shown that chisel-tooth digging mole-rats (which use their incisors to dig burrows) are clearly distinguishable from scratch diggers (which only use the forelimbs to tunnel) on the basis of morphology of the skull, and that the differences are linked to the production of high bite forces and wide gapes. We hypothesized that the skull of a chisel-tooth digging mole-rat would perform better at wider gapes than that of a scratch digging mole-rat during incisor biting. To test this hypothesis, we created finite-element models of the cranium of the scratch digging Bathyergus suillus and the chisel-tooth digging Fukomys mechowii, and loaded them to simulate incisor bites at different gapes. Muscle loads were scaled such that the ratio of force to surface area was the same in both models. We measured three performance variables: overall stress across the cranium, mechanical efficiency of biting and degree of deformation across the skull. The Fukomys model had a more efficient incisor bite at all gapes, despite having greater average stress across the skull. In addition, the Fukomys model deformed less at wider gapes, whereas the Bathyergus model deformed less at narrower gapes. These properties of the cranial morphology of Fukomys and Bathyergus are congruent with their respective chisel-tooth and scratch digging behaviours and, all other factors being equal, would enable the more efficient production of bite force at wider gapes in Fukomys. However, in vivo measurements of muscle forces and activation patterns are needed to fully understand the complex biomechanics of tooth digging.

Masticatory biomechanics in the rabbit: a multi-body dynamics analysis.

PubMed

Watson, Peter J; Gröning, Flora; Curtis, Neil; Fitton, Laura C; Herrel, Anthony; McCormack, Steven W; Fagan, Michael J

2014-10-06

Multi-body dynamics is a powerful engineering tool which is becoming increasingly popular for the simulation and analysis of skull biomechanics. This paper presents the first application of multi-body dynamics to analyse the biomechanics of the rabbit skull. A model has been constructed through the combination of manual dissection and three-dimensional imaging techniques (magnetic resonance imaging and micro-computed tomography). Individual muscles are represented with multiple layers, thus more accurately modelling muscle fibres with complex lines of action. Model validity was sought through comparing experimentally measured maximum incisor bite forces with those predicted by the model. Simulations of molar biting highlighted the ability of the masticatory system to alter recruitment of two muscle groups, in order to generate shearing or crushing movements. Molar shearing is capable of processing a food bolus in all three orthogonal directions, whereas molar crushing and incisor biting are predominately directed vertically. Simulations also show that the masticatory system is adapted to process foods through several cycles with low muscle activations, presumably in order to prevent rapidly fatiguing fast fibres during repeated chewing cycles. Our study demonstrates the usefulness of a validated multi-body dynamics model for investigating feeding biomechanics in the rabbit, and shows the potential for complementing and eventually reducing in vivo experiments.

Masticatory biomechanics in the rabbit: a multi-body dynamics analysis

PubMed Central

Watson, Peter J.; Gröning, Flora; Curtis, Neil; Fitton, Laura C.; Herrel, Anthony; McCormack, Steven W.; Fagan, Michael J.

2014-01-01

Multi-body dynamics is a powerful engineering tool which is becoming increasingly popular for the simulation and analysis of skull biomechanics. This paper presents the first application of multi-body dynamics to analyse the biomechanics of the rabbit skull. A model has been constructed through the combination of manual dissection and three-dimensional imaging techniques (magnetic resonance imaging and micro-computed tomography). Individual muscles are represented with multiple layers, thus more accurately modelling muscle fibres with complex lines of action. Model validity was sought through comparing experimentally measured maximum incisor bite forces with those predicted by the model. Simulations of molar biting highlighted the ability of the masticatory system to alter recruitment of two muscle groups, in order to generate shearing or crushing movements. Molar shearing is capable of processing a food bolus in all three orthogonal directions, whereas molar crushing and incisor biting are predominately directed vertically. Simulations also show that the masticatory system is adapted to process foods through several cycles with low muscle activations, presumably in order to prevent rapidly fatiguing fast fibres during repeated chewing cycles. Our study demonstrates the usefulness of a validated multi-body dynamics model for investigating feeding biomechanics in the rabbit, and shows the potential for complementing and eventually reducing in vivo experiments. PMID:25121650

Puff and bite: the relationship between the glucocorticoid stress response and anti-predator performance in checkered puffer (Sphoeroides testudineus).

PubMed

Cull, Felicia; O'Connor, Constance M; Suski, Cory D; Shultz, Aaron D; Danylchuk, Andy J; Cooke, Steven J

2015-04-01

Individual variation in the endocrine stress response has been linked to survival and performance in a variety of species. Here, we evaluate the relationship between the endocrine stress response and anti-predator behaviors in wild checkered puffers (Sphoeroides testudineus) captured at Eleuthera Island, Bahamas. The checkered puffer has a unique and easily measurable predator avoidance strategy, which is to inflate or 'puff' to deter potential predators. In this study, we measured baseline and stress-induced circulating glucocorticoid levels, as well as bite force, a performance measure that is relevant to both feeding and predator defence, and 'puff' performance. We found that puff performance and bite force were consistent within individuals, but generally decreased following a standardized stressor. Larger puffers were able to generate a higher bite force, and larger puffers were able to maintain a more robust puff performance following a standardized stressor relative to smaller puffers. In terms of the relationship between the glucocorticoid stress response and performance metrics, we found no relationship between post-stress glucocorticoid levels and either puff performance or bite force. However, we did find that baseline glucocorticoid levels predicted the ability of a puffer to maintain a robust puff response following a repeated stressor, and this relationship was more pronounced in larger individuals. Our work provides a novel example of how baseline glucocorticoids can predict a fitness-related anti-predator behavior. Copyright © 2015 Elsevier Inc. All rights reserved.

Cranial morphology and bite force in Chamaeleolis lizards--adaptations to molluscivory?

PubMed

Herrel, Anthony; Holanova, Veronika

2008-01-01

Anolis lizards have become a model system for the study of adaptive radiations as species with similar morphologies occupying similar habitats have arisen independently on all the larger islands in the Caribbean. However, on both, Cuba and Hispaniola unique forms have evolved that seemingly have no counterparts on any of the other Caribbean islands. Anoles of the genus Chamaeleolis comprise such a unique form and have been termed 'twig giants' because of their cryptic life style, slow locomotor mode, and short limbs. However, some of the most unusual features of these lizards are their large heads and molluscivorous diet. Here, we compare head shape, bite force, and muscle structure among sexes and age classes of Chamaeleolis lizards with Anolis crown giants. Our data show that Chamaeleolis lizards have a dramatically different head shape characterized by tall heads with a pronounced temporal ridge and long snouts. Analyses of bite force, surprisingly, show no differences between adult Chamaeleolis and Anolis crown giants. Juveniles of Chamaeleolis, however, have very tall heads for their size and bite harder than Anolis juveniles do. This can be related to the propensity of juveniles of this genus to eat snails, food items for which high bite forces are crucial. This observation is corroborated by the presence of well-developed jaw adductors in juveniles. Thus, our data suggest that the unusual phenotype of adults with large and tall heads may be due to selection on the juvenile life history stages.

The influence of feeding on the evolution of sensory signals: a comparative test of an evolutionary trade-off between masticatory and sensory functions of skulls in southern African horseshoe bats (Rhinolophidae).

PubMed

Jacobs, D S; Bastian, A; Bam, L

2014-12-01

The skulls of animals have to perform many functions. Optimization for one function may mean another function is less optimized, resulting in evolutionary trade-offs. Here, we investigate whether a trade-off exists between the masticatory and sensory functions of animal skulls using echolocating bats as model species. Several species of rhinolophid bats deviate from the allometric relationship between body size and echolocation frequency. Such deviation may be the result of selection for increased bite force, resulting in a decrease in snout length which could in turn lead to higher echolocation frequencies. If so, there should be a positive relationship between bite force and echolocation frequency. We investigated this relationship in several species of southern African rhinolophids using phylogenetically informed analyses of the allometry of their bite force and echolocation frequency and of the three-dimensional shape of their skulls. As predicted, echolocation frequency was positively correlated with bite force, suggesting that its evolution is influenced by a trade-off between the masticatory and sensory functions of the skull. In support of this, variation in skull shape was explained by both echolocation frequency (80%) and bite force (20%). Furthermore, it appears that selection has acted on the nasal capsules, which have a frequency-specific impedance matching function during vocalization. There was a negative correlation between echolocation frequency and capsule volume across species. Optimization of the masticatory function of the skull may have been achieved through changes in the shape of the mandible and associated musculature, elements not considered in this study. © 2014 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2014 European Society For Evolutionary Biology.

Range of motion exercise of temporo-mandibular joint with hot pack increases occlusal force in patients with Duchenne muscular dystrophy.

PubMed

Nozaki, S; Kawai, M; Shimoyama, R; Futamura, N; Matsumura, T; Adachi, K; Kikuchi, Y

2010-12-01

The purpose of this study is to evaluate whether the range of motion exercise of the temporo-mandibular joint (jaw ROM exercise) with a hot pack and massage of the masseter muscle improve biting disorder in Duchenne muscular dystrophy (DMD). The subjects were 18 DMD patients (21.3+/- 4.1 years old). The jaw ROM exercise consisted of therapist-assisted training (2 times a week) and self-training (before each meal every day). The therapist-assisted training consisted of the application of a hot pack on the cheek of the masseter muscle region (15 minutes), the massage of the masseter (10 minutes), and jaw ROM exercise (5 minutes). The self-training involved jaw ROM exercise by opening the mouth to the maximum degree, ten times. These trainings continued for six months. Outcomes were evaluated by measuring the greatest occlusal force and the distance at the maximum degree of mouth opening between an incisor of the top and that of the bottom. Six months later, the greatest occlusal force had increased significantly compared with that at the start of jaw ROM exercise (intermediate values: from 73.8N to 97.3N) (p = 0.005) as determined by the Friedman test and Scheffi's nonparametric test. The patients' satisfaction with meals increased. However, the maximum degree of mouth opening did not change after six months of jaw ROM exercise. Jaw ROM exercise in DMD is effective for increasing the greatest occlusal force.

Biting mechanics and niche separation in a specialized clade of primate seed predators

PubMed Central

Luk, Theodora H. Y.; Perry, Jonathan M. G.; Neaux, Dimitri; Wroe, Stephen

2018-01-01

We analyzed feeding biomechanics in pitheciine monkeys (Pithecia, Chiropotes, Cacajao), a clade that specializes on hard-husked unripe fruit (sclerocarpy) and resistant seeds (seed predation). We tested the hypothesis that pitheciine crania are well-suited to generate and withstand forceful canine and molar biting, with the prediction that they generate bite forces more efficiently and better resist masticatory strains than the closely-related Callicebus, which does not specialize on unripe fruits and/or seeds. We also tested the hypothesis that Callicebus-Pithecia-Chiropotes-Cacajao represent a morphocline of increasing sclerocarpic specialization with respect to biting leverage and craniofacial strength, consistent with anterior dental morphology. We found that pitheciines have higher biting leverage than Callicebus and are generally more resistant to masticatory strain. However, Cacajao was found to experience high strain magnitudes in some facial regions. We therefore found limited support for the morphocline hypothesis, at least with respect to the mechanical performance metrics examined here. Biting leverage in Cacajao was nearly identical (or slightly less than) in Chiropotes and strain magnitudes during canine biting were more likely to follow a Cacajao-Chiropotes-Pithecia trend of increasing strength, in contrast to the proposed morphocline. These results could indicate that bite force efficiency and derived anterior teeth were selected for in pitheciines at the expense of increased strain magnitudes. However, our results for Cacajao potentially reflect reduced feeding competition offered by allopatry with other pitheciines, which allows Cacajao species to choose from a wider variety of fruits at various stages of ripeness, leading to reduction in the selection for robust facial features. We also found that feeding biomechanics in sympatric Pithecia and Chiropotes are consistent with data on food structural properties and observations of dietary niche separation, with the former being well-suited for the regular molar crushing of hard seeds and the latter better adapted for breaching hard fruits. PMID:29324822

Stomatognathic function in Duchenne muscular dystrophy: a case-control study.

PubMed

Ferreira, Bruno; Da Silva, Gabriel Pádua; Gonçalves, Camila Rosa; Arnoni, Veridiana Wanshi; Siéssere, Selma; Semprini, Marisa; Verri, Edson Donizetti; Chaves, Thais Cristina; Regalo, Simone Cecilio Hallak

2016-05-01

This study aimed to analyse electromyographic activity, masticatory efficiency, muscle thickness, and bite force of individuals with Duchenne muscular dystrophy (DMD). Forty males aged 4-15 years, 20 with DMD and 20 healthy age-, height-, and weight-matched controls, underwent electromyography and ultrasonography of temporalis, masseter, and sternocleidomastoid muscles during postural control of the jaw, mastication, and maximal molar bite force. The normalized electromyography signals showed higher activity in masseter and temporal muscles at rest, during protrusion, left and right laterality, and fatigue condition in the group with DMD than in the comparison group (p≤0.05). For masticatory efficiency of cycles, in analysis of non-habitual chewing of flavourless gum, and habitual chewing of peanuts and raisins, the group with DMD presented lower averages (p≤0.05). For the muscle thickness, the results showed that there was a lower muscle thickness in the group with DMD for all muscles during the rest and maximal voluntary contraction, except for masseter and sternocleidomastoid in the maximal voluntary contraction. In the maximal molar bite force, the group with DMD presented higher values for both sides than the comparison group (p≤0.05). Patients with DMD show muscle changes related to the stomatognathic system, in their activity, bite force, and muscle thickness. © 2016 Mac Keith Press.

Relationship between orofacial function, dentofacial morphology, and bite force in young subjects.

PubMed

Marquezin, M C S; Gavião, M B D; Alonso, M B C C; Ramirez-Sotelo, L R; Haiter-Neto, F; Castelo, P M

2014-09-01

The aim was to evaluate the relationship between orofacial function, dentofacial morphology, and bite force in young subjects. Three hundred and sixteen subjects were divided according to dentition stage (early, intermediate, and late mixed and permanent dentition). Orofacial function was screened using the Nordic Orofacial Test-Screening (NOT-S). Orthodontic treatment need, bite force, lateral and frontal craniofacial dimensions and presence of sleep bruxism were also assessed. The results were submitted to descriptive statistics, normality and correlation tests, analysis of variance, and multiple linear regression to test the relationship between NOT-S scores and the studied independent variables. The variance of NOT-S scores between groups was not significant. The evaluation of the variables that significantly contributed to NOT-S scores variation showed that age and presence of bruxism related to higher NOT-S total scores, while the increase in overbite measurement and presence of closed lip posture related to lower scores. Bite force did not show a significant relationship with scores of orofacial dysfunction. No significant correlations between craniofacial dimensions and NOT-S scores were observed. Age and sleep bruxism were related to higher NOT-S scores, while the increase in overbite measurement and closed lip posture contributed to lower scores of orofacial dysfunction. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

PubMed Central

Nozaki, S.; Kawai, M.; Shimoyama, R.; Futamura, N.; Matsumura, T.; Adachi, K.; Kikuchi, Y.

2010-01-01

The purpose of this study is to evaluate whether the range of motion exercise of the temporo-mandibular joint (jaw ROM exercise) with a hot pack and massage of the masseter muscle improve biting disorder in Duchenne muscular dystrophy (DMD). The subjects were 18 DMD patients (21.3 ± 4.1 years old). The jaw ROM exercise consisted of therapist-assisted training (2 times a week) and self-training (before each meal every day). The therapist-assisted training consisted of the application of a hot pack on the cheek of the masseter muscle region (15 minutes), the massage of the masseter (10 minutes), and jaw ROM exercise (5 minutes). The self-training involved jaw ROM exercise by opening the mouth to the maximum degree, ten times. These trainings continued for six months. Outcomes were evaluated by measuring the greatest occlusal force and the distance at the maximum degree of mouth opening between an incisor of the top and that of the bottom. Six months later, the greatest occlusal force had increased significantly compared with that at the start of jaw ROM exercise (intermediate values: from 73.8N to 97.3N) (p = 0.005) as determined by the Friedman test and Scheffé's nonparametric test. The patients' satisfaction with meals increased. However, the maximum degree of mouth opening did not change after six months of jaw ROM exercise. Jaw ROM exercise in DMD is effective for increasing the greatest occlusal force. PMID:21574523

Masticatory performance-related factors in preschool children: establishing a method to assess masticatory performance in preschool children using colour-changeable chewing gum.

PubMed

Hama, Y; Hosoda, A; Komagamine, Y; Gotoh, S; Kubota, C; Kanazawa, M; Minakuchi, S

2017-12-01

A knowledge gap regarding masticatory performance in preschool children exists, which in turn delays intervention for preventive care; therefore, a method to easily assess performance is needed. The purpose of this study is to investigate the feasibility of assessing masticatory performance using colour-changeable chewing gum and to investigate masticatory performance-related factors in preschool children. This cross-sectional survey was conducted in two childcare facilities and our laboratory. First, a one-third quantity of colour-changeable chewing gum was masticated by six adults to assess the nature and progression of colour changes in this quantity. Then, masticatory performance in 370 children 4-6 years of age was assessed using the same quantity of colour-changeable chewing gum (60 chew strokes). The maximum bite force, body height, weight, age and number of healthy teeth were recorded. A t-test was performed to determine whether gum-chewing experience or lack thereof produced a significant difference in masticatory performance. The Spearman's rank correlation coefficient was then determined for masticatory performance assessment values and other factors solely for children with gum-chewing experience. Measurements from 259 children were obtained. Children with gum-chewing experience demons trated significantly higher assessment values and were deemed to have been correctly assessed. A very weak but significant positive correlation was observed only between masticatory performance and the number of healthy teeth. The masticatory performance of preschool children was easily assessed using colour-changeable chewing gum. The assessment values demonstrated significant correlation with the number of healthy teeth, but not with maximum bite force, body height, weight or age. © 2017 John Wiley & Sons Ltd.

The relationship between skull morphology, masticatory muscle force and cranial skeletal deformation during biting.

PubMed

Toro-Ibacache, Viviana; Zapata Muñoz, Víctor; O'Higgins, Paul

2016-01-01

The human skull is gracile when compared to many Middle Pleistocene hominins. It has been argued that it is less able to generate and withstand high masticatory forces, and that the morphology of the lower portion of the modern human face correlates most strongly with dietary characteristics. This study uses geometric morphometrics and finite element analysis (FEA) to assess the relationship between skull morphology, muscle force and cranial deformations arising from biting, which is relevant in understanding how skull morphology relates to mastication. The three-dimensional skull anatomies of 20 individuals were reconstructed from medical computed tomograms. Maximal contractile muscle forces were estimated from muscular anatomical cross-sectional areas (CSAs). Fifty-nine landmarks were used to represent skull morphology. A partial least squares analysis was performed to assess the association between skull shape and muscle force, and FEA was used to compare the deformation (strains) generated during incisor and molar bites in two individuals representing extremes of morphological variation in the sample. The results showed that only the proportion of total muscle CSA accounted for by the temporalis appears associated with skull morphology, albeit weekly. However, individuals with a large temporalis tend to possess a relatively wider face, a narrower, more vertically oriented maxilla and a lower positioning of the coronoid process. The FEAs showed that, despite differences in morphology, biting results in similar modes of deformation for both crania, but with localised lower magnitudes of strains arising in the individual with the narrowest, most vertically oriented maxilla. Our results suggest that the morphology of the maxilla modulates the transmission of forces generated during mastication to the rest of the cranium by deforming less in individuals with the ability to generate proportionately larger temporalis muscle forces. Copyright © 2015 Elsevier GmbH. All rights reserved.

Clinical performance of a lithia disilicate-based core ceramic for three-unit posterior FPDs.

PubMed

Esquivel-Upshaw, Josephine F; Anusavice, Kenneth J; Young, Henry; Jones, Jack; Gibbs, Charles

2004-01-01

The purpose of this research project was to determine the clinical success rate of a lithia disilicate-based core ceramic for use in posterior fixed partial dentures (FPD) as a function of bite force, cement type, connector height, and connector width. Thirty ceramic FPD core frameworks were prepared using a heat-pressing technique and a lithia disilicate-based core ceramic. The maximum clenching force was measured for each patient prior to tooth preparation. Connector height and width were measured for each FPD. Patients were recalled yearly after cementation for 2 years and evaluated using 11 clinical criteria. All FPDs were examined by two independent clinicians, and rankings from 1 to 4 were made for each criterion (4 = excellent; 1 = unacceptable). Two of the 30 ceramic FPDs fractured within the 2-year evaluation period, representing a 93% success rate. One fracture was associated with a low occlusal force and short connector height (2.9 mm). The other fracture was associated with the greatest occlusal force (1,031 N) and adequate connector height. All criteria were ranked good to excellent during the 2-year recall for all remaining FPDs. The performance of the experimental core ceramic in posterior FPDs was promising, with only a 7% fracture rate after 2 years. Because of the limited sample size, it is not possible to identify the maximum clenching force that is allowable to prevent fracture caused by interocclusal forces.

Sexual dimorphism in bite performance drives morphological variation in chameleons.

PubMed

da Silva, Jessica M; Herrel, Anthony; Measey, G John; Tolley, Krystal A

2014-01-01

Phenotypic performance in different environments is central to understanding the evolutionary and ecological processes that drive adaptive divergence and, ultimately, speciation. Because habitat structure can affect an animal's foraging behaviour, anti-predator defences, and communication behaviour, it can influence both natural and sexual selection pressures. These selective pressures, in turn, act upon morphological traits to maximize an animal's performance. For performance traits involved in both social and ecological activities, such as bite force, natural and sexual selection often interact in complex ways, providing an opportunity to understand the adaptive significance of morphological variation with respect to habitat. Dwarf chameleons within the Bradypodion melanocephalum-Bradypodion thamnobates species complex have multiple phenotypic forms, each with a specific head morphology that could reflect its use of either open- or closed-canopy habitats. To determine whether these morphological differences represent adaptations to their habitats, we tested for differences in both absolute and relative bite performance. Only absolute differences were found between forms, with the closed-canopy forms biting harder than their open-canopy counterparts. In contrast, sexual dimorphism was found for both absolute and relative bite force, but the relative differences were limited to the closed-canopy forms. These results indicate that both natural and sexual selection are acting within both habitat types, but to varying degrees. Sexual selection seems to be the predominant force within the closed-canopy habitats, which are more protected from aerial predators, enabling chameleons to invest more in ornamentation for communication. In contrast, natural selection is likely to be the predominant force in the open-canopy habitats, inhibiting the development of conspicuous secondary sexual characteristics and, ultimately, enforcing their overall diminutive body size and constraining performance.

Sexual Dimorphism in Bite Performance Drives Morphological Variation in Chameleons

PubMed Central

da Silva, Jessica M.; Herrel, Anthony; Measey, G. John; Tolley, Krystal A.

2014-01-01

Phenotypic performance in different environments is central to understanding the evolutionary and ecological processes that drive adaptive divergence and, ultimately, speciation. Because habitat structure can affect an animal’s foraging behaviour, anti-predator defences, and communication behaviour, it can influence both natural and sexual selection pressures. These selective pressures, in turn, act upon morphological traits to maximize an animal’s performance. For performance traits involved in both social and ecological activities, such as bite force, natural and sexual selection often interact in complex ways, providing an opportunity to understand the adaptive significance of morphological variation with respect to habitat. Dwarf chameleons within the Bradypodion melanocephalum-Bradypodion thamnobates species complex have multiple phenotypic forms, each with a specific head morphology that could reflect its use of either open- or closed-canopy habitats. To determine whether these morphological differences represent adaptations to their habitats, we tested for differences in both absolute and relative bite performance. Only absolute differences were found between forms, with the closed-canopy forms biting harder than their open-canopy counterparts. In contrast, sexual dimorphism was found for both absolute and relative bite force, but the relative differences were limited to the closed-canopy forms. These results indicate that both natural and sexual selection are acting within both habitat types, but to varying degrees. Sexual selection seems to be the predominant force within the closed-canopy habitats, which are more protected from aerial predators, enabling chameleons to invest more in ornamentation for communication. In contrast, natural selection is likely to be the predominant force in the open-canopy habitats, inhibiting the development of conspicuous secondary sexual characteristics and, ultimately, enforcing their overall diminutive body size and constraining performance. PMID:24475183

Jaw Function in Smilodon fatalis: A Reevaluation of the Canine Shear-Bite and a Proposal for a New Forelimb-Powered Class 1 Lever Model

PubMed Central

Brown, Jeffrey G.

2014-01-01

The jaw function of Smilodon fatalis has long been a source of debate. Although modern-day lions subdue large prey through the use of a suffocating throat bite, the dramatically elongated maxillary canines of S. fatalis suggest an alternative bite mechanism. The current literature favors a “canine shear-bite,” in which the depression of the cranium by the ventral neck flexors assists the mandibular adductors in closing the jaws. Although the model makes intuitive sense and appears to be supported by scientific data, the mechanical feasibility of “neck-powered” biting has not been experimentally demonstrated. In the present study, the computer-assisted manipulation of digitized images of a high-quality replica of an S. fatalis neck and skull shows that a rotation of the cranium by the ventral neck flexors will not result in jaw closure. Instead, the cranium and mandible rotate ventrally together (at the atlantooccipital joint), and the jaws remain in an open configuration. The only manner by which rotation of the cranium can simultaneously result in jaw closure is by an anterior rotation at the temporomandibular joint. Based on this finding, the author proposes a new Class 1 lever mechanism for S. fatalis jaw function. In this model, the mandible is immobilized against the neck of the prey and a dorsally directed force from the extension of the forelimbs rotates the cranium anteriorly at the temporomandibular joint. The maxillary canines pierce the prey’s neck and assist in clamping the ventral neck structures. The model is based on a maximum gape angle of approximately 90° and incorporates a secondary virtual point of rotation located slightly anteroventral to the temporomandibular joint. The Class 1 Lever Model is mechanically feasible, consistent with current data on S. fatalis anatomy and ecology, and may provide a basis for similar studies on other fossil taxa. PMID:25272032

Functional anatomy of incisal biting in Aplodontia rufa and sciuromorph rodents - part 2: sciuromorphy is efficacious for production of force at the incisors.

PubMed

Druzinsky, Robert E

2010-01-01

The protrogomorph condition of the rodent masticatory apparatus is thought to be present in only one living species, the mountain beaver Aplodontia rufa. The major anatomical difference between protrogomorphs and sciuromorphs is that the relative size of one part of the masseter muscle, the anterior lateral masseter, is much greater in sciuromorphs than in protrogomorphs. The mechanics of force production at the incisors were compared in A. rufa and six sciuromorph rodents. Is the sciuroid masticatory apparatus more effective for production of forces at the incisors during biting than the primitive, protrogomorph condition? To answer this question, three measures of mechanical ability were employed and three hypotheses were tested: (1) the mechanical advantage of the adductor musculature is greater in sciuromorphs than in A. rufa; (2) the relative force produced at the incisors is greater in sciuromorphs than in A. rufa, and (3) the relative amount of force produced that can be used to drive the incisors into an object, is greater in sciuromorphs than in A. rufa. The results demonstrated that the protrogomorph, A. rufa, is not as efficient at generating bite forces at the incisors as the sciuromorphs. Copyright 2010 S. Karger AG, Basel.

Dietary consistency and plasticity of masseter fiber architecture in postweaning rabbits.

PubMed

Taylor, Andrea B; Jones, Kelly E; Kunwar, Ravinder; Ravosa, Matthew J

2006-10-01

Dietary consistency has been shown to influence cross-sectional area and fiber type composition of the masticatory muscles. However, little is known about the effects of dietary consistency on masticatory muscle fiber architecture. In this study, we explore the effects of dietary consistency on the internal architecture of rabbit masseter muscle. Because activity patterns of the rabbit chewing muscles show inter- and intramuscular heterogeneity, we evaluate if alterations in fiber architecture are homogeneous across various portions of the superficial masseter muscle. We compared masseter muscle fiber architecture between two groups of weanling rabbits raised on different diets for 105 days. One group was raised on a diet of ground rabbit pellets to model underuse of the masticatory complex, while the other group was fed a diet of intact pellets and hay blocks to model an overuse diet. In all portions of the superficial masseter, physiological cross-sectional areas (PCSAs) are greater in the overuse compared to underuse diet rabbits. Thus, the mechanical demands for larger muscle and bite forces associated with early and prolonged exposure to a tough diet are met by an increase in PCSA of the superficial masseter. The larger PCSA is due entirely to increased muscle mass, as the two rabbit groups show no differences in either fiber length or angle of pinnation. Thus, increasing pinnation angle is not a necessary biomechanical solution to improving muscle and bite force during growth. The change in PCSA but not fiber length suggests that variation in dietary consistency has an impact on maximum force production but not necessarily on excursion or contraction velocity.

Estimation of Dog-Bite Risk and Related Morbidity Among Personnel Working With Military Dogs.

PubMed

Schermann, H; Eiges, N; Sabag, A; Kazum, E; Albagli, A; Salai, M; Shlaifer, A

Soldiers serving in the Israel Defense Force Military Working Dogs (MWD) Unit spend many hours taming dogs' special skills, taking them on combat missions, and performing various dogkeeping activities. During this intensive work with the aggressive military dogs, bites are common, and some of them result in permanent disability. However, this phenomenon has not been quantified or reported as an occupational hazard. This was a retrospective cohort study based on self-administered questionnaires. Information was collected about soldiers' baseline demographics, duration of the experience of working with dogs, total number of bites they had, circumstances of bite events, and complications and medical treatment of each bite. Bite risk was quantified by incidence, mean time to first bite, and a Cox proportional hazards model. Rates of complications and the medical burden of bites were compared between combat soldiers and noncombat dogkeepers. Bite locations were presented graphically. Seventy-eight soldiers participated and reported on 139 bites. Mean time of working with dogs was 16 months (standard deviation, ±9.4 months). Overall bite incidence was 11 bites per 100 person-months; the mean time to first bite event was 6.3 months. The Cox proportional hazards model showed that none of baseline characteristics significantly increased bite hazard. About 90% of bites occurred during routine activities, and 3.3% occurred on combat missions. Only in 9% of bite events did soldiers observed the safety precautions code. Bite complications included fractures, need for intravenous antibiotic treatment and surgical repair, prominent scarring, diminished sensation, and stiffness of proximal joints. Bite complications were similar between combat soldiers and dogkeepers. Most bites (57%) were located on hands and arms. MWD bites are an occupational hazard resulting in significant medical burden. Hands and arms were most common bite locations. Observance of safety precautions may be the most appropriate first-line preventive intervention. Barrier protection of upper extremities may reduce bite severity and complication rates. 2017.

The Effect of Varying Jaw-elevator Muscle Forces on a Finite Element Model of a Human Cranium.

PubMed

Toro-Ibacache, Viviana; O'Higgins, Paul

2016-07-01

Finite element analyses simulating masticatory system loading are increasingly undertaken in primates, hominin fossils and modern humans. Simplifications of models and loadcases are often required given the limits of data and technology. One such area of uncertainty concerns the forces applied to cranial models and their sensitivity to variations in these forces. We assessed the effect of varying force magnitudes among jaw-elevator muscles applied to a finite element model of a human cranium. The model was loaded to simulate incisor and molar bites using different combinations of muscle forces. Symmetric, asymmetric, homogeneous, and heterogeneous muscle activations were simulated by scaling maximal forces. The effects were compared with respect to strain distribution (i.e., modes of deformation) and magnitudes; bite forces and temporomandibular joint (TMJ) reaction forces. Predicted modes of deformation, strain magnitudes and bite forces were directly proportional to total applied muscle force and relatively insensitive to the degree of heterogeneity of muscle activation. However, TMJ reaction forces and mandibular fossa strains decrease and increase on the balancing and working sides according to the degree of asymmetry of loading. These results indicate that when modes, rather than magnitudes, of facial deformation are of interest, errors in applied muscle forces have limited effects. However the degree of asymmetric loading does impact on TMJ reaction forces and mandibular fossa strains. These findings are of particular interest in relation to studies of skeletal and fossil material, where muscle data are not available and estimation of muscle forces from skeletal proxies is prone to error. Anat Rec, 299:828-839, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Dimorphism throughout the European eel's life cycle: are ontogenetic changes in head shape related to dietary differences?

PubMed

De Meyer, J; Goethals, T; Van Wassenbergh, S; Augustijns, T; Habraken, J; Hellemans, J; Vandewiele, V; Dhaene, J; Bouillart, M; Adriaens, D

2018-05-31

A well-known link exists between an organism's ecology and morphology. In the European eel, a dimorphic head has been linked to differences in feeding ecology, with broad-headed eels consuming harder prey items than narrow-headed ones. Consequently, we hypothesized that broad-heads should exhibit a cranial musculoskeletal system that increases bite force and facilitates the consumption of harder prey. Using 3D-reconstructions and a bite model, we tested this hypothesis in two life stages: the sub-adult yellow eel stage and its predecessor, the elver eel stage. This allowed us to test whether broad- and narrow-headed phenotypes show similar trait differences in both life stages and whether the dimorphism becomes more pronounced during ontogeny. We show that broad-headed eels in both stages have larger jaw muscles and a taller coronoid, which are associated with higher bite forces. This increased bite force together with the elongated upper and lower jaws in broad-headed eels can also improve grip during spinning behavior, which is used to manipulate hard prey. Head shape variation in European eel is therefore associated with musculoskeletal variation that can be linked to feeding ecology. However, although differences in muscle volume become more pronounced during ontogeny, this was not the case for skeletal features. © 2018 Anatomical Society.

Masticatory muscle architecture in a water-rat from Australasia (Murinae, Hydromys) and its implication for the evolution of carnivory in rodents.

PubMed

Fabre, P-H; Herrel, A; Fitriana, Y; Meslin, L; Hautier, L

2017-09-01

Murines are well known for their generalist diet, but several of them display specializations towards a carnivorous diet such as the amphibious Indo-Pacific water-rats. Despite the fact that carnivory evolved repeatedly in this group, few studies have investigated associated changes in jaw muscle anatomy and biomechanics. Here, we describe the jaw muscles and cranial anatomy of a carnivorous water-rat, Hydromys chrysogaster. The architecture of the jaw musculature of six specimens captured both on Obi and Papua were studied and described using dissections. We identified the origin and insertions of the jaw muscles, and quantified muscle mass, fiber length, physiological cross-sectional area, and muscle vectors for each muscle. Using a biomechanical model, we estimated maximum incisor and molar bite force at different gape angles. Finally, we conducted a 2D geometric morphometric analyses to compare jaw shape, mechanical potential, and diversity in lever-arm ratios for a set of 238 specimens, representative of Australo-Papuan carnivorous and omnivorous murids. Our study reveals major changes in the muscle proportions among Hydromys and its omnivorous close relative, Melomys. Hydromys was found to have large superficial masseter and temporalis muscles as well as a reduced deep masseter and zygomatico-mandibularis, highlighting major functional divergence among omnivorous and carnivorous murines. Changes in these muscles are also accompanied by changes in jaw shape and the lines of action of the muscles. A more vertically oriented masseter, reduced masseteric muscles, as well as an elongated jaw with proodont lower incisors are key features indicative of a reduced propalinality in carnivorous Hydromys. Differences in the fiber length of the masseteric muscles were also detected between Hydromys and Melomys, which highlight potential adaptations to a wide gape in Hydromys, allowing it to prey on larger animals. Using a biomechanical model, we inferred a greater bite force in Hydromys than in Melomys, implying a functional shift between omnivory and carnivory. However, Melomys has an unexpected greater bite force at large gape compared with Hydromys. Compared with omnivorous Melomys, Hydromys have a very distinctive low mandible with a well-developed coronoid process, and a reduced angular process that projects posteriorly to the ascending rami. This jaw shape, along with our mechanical potential and jaw lever ratio estimates, suggests that Hydromys has a faster jaw closing at the incisor, with a higher bite force at the level of the molars. The narrowing of the Hydromys jaw explains this higher lever advantage at the molars, which constitutes a good compromise between a wide gape, a reduced anterior masseteric mass, and long fiber lengths. Lever arms of the superficial and deep masseter are less favourable to force output of the mandible in Hydromys but more favourable to speed. Compared with the small input lever arm defined between the condyle and the angular process, the relatively longer mandible of Hydromys increases the speed at the expense of the output force. This unique combination of morphological features of the masticatory apparatus possibly has permitted Hydromys to become a highly successful amphibious predator in the Indo-Pacific region. © 2017 Anatomical Society.

Localised task-dependent motor-unit recruitment in the masseter.

PubMed

Schindler, H J; Hellmann, D; Giannakopoulos, N N; Eiglsperger, U; van Dijk, J P; Lapatki, B G

2014-07-01

Localised motor-unit (MU) recruitment in the masseter was analysed in this study. We investigated whether differential activation behaviour, which has already been reported for distant masseter regions, can also be detected in small muscle subvolumes at the level of single MUs. Two bipolar fine-wire electrodes and an intra-oral 3D bite-force transmitter were used to record intra-muscular electromyograms (EMG) resulting from controlled bite-forces of 10 healthy human subjects (mean age 24.1 ± 1.2 years). Two-hundred and seventeen decomposed MUs were organised into localised MU task groups with different (P < 0.001) force-direction-specific behaviour. Proportions of MUs involved in one, two, three or four examined tasks were 46%, 31%, 18% and 5%, respectively. This study provides evidence of the ability of the neuromuscular system to modify the mechanical output of small masseter subvolumes by differential control of adjacent MUs belonging to distinct task groups. Localised differential activation behaviour of the masseter may be the crucial factor enabling highly flexible and efficient adjustment of the muscle activity in response to complex local biomechanical needs, for example, continually varying bite-forces during the demanding masticatory process. © 2014 John Wiley & Sons Ltd.

Masticatory loadings and cranial deformation in Macaca fascicularis: a finite element analysis sensitivity study.

PubMed

Fitton, L C; Shi, J F; Fagan, M J; O'Higgins, P

2012-07-01

Biomechanical analyses are commonly conducted to investigate how craniofacial form relates to function, particularly in relation to dietary adaptations. However, in the absence of corresponding muscle activation patterns, incomplete muscle data recorded experimentally for different individuals during different feeding tasks are frequently substituted. This study uses finite element analysis (FEA) to examine the sensitivity of the mechanical response of a Macaca fascicularis cranium to varying muscle activation patterns predicted via multibody dynamic analysis. Relative to the effects of varying bite location, the consequences of simulated variations in muscle activation patterns and of the inclusion/exclusion of whole muscle groups were investigated. The resulting cranial deformations were compared using two approaches; strain maps and geometric morphometric analyses. The results indicate that, with bite force magnitude controlled, the variations among the mechanical responses of the cranium to bite location far outweigh those observed as a consequence of varying muscle activations. However, zygomatic deformation was an exception, with the activation levels of superficial masseter being most influential in this regard. The anterior portion of temporalis deforms the cranial vault, but the remaining muscles have less profound effects. This study for the first time systematically quantifies the sensitivity of an FEA model of a primate skull to widely varying masticatory muscle activations and finds that, with the exception of the zygomatic arch, reasonable variants of muscle loading for a second molar bite have considerably less effect on cranial deformation and the resulting strain map than does varying molar bite point. The implication is that FEA models of biting crania will generally produce acceptable estimates of deformation under load as long as muscle activations and forces are reasonably approximated. In any one FEA study, the biological significance of the error in applied muscle forces is best judged against the magnitude of the effect that is being investigated. © 2012 The Authors. Journal of Anatomy © 2012 Anatomical Society.

Masticatory loadings and cranial deformation in Macaca fascicularis: a finite element analysis sensitivity study

PubMed Central

Fitton, L C; Shi, J F; Fagan, M J; O’Higgins, P

2012-01-01

Biomechanical analyses are commonly conducted to investigate how craniofacial form relates to function, particularly in relation to dietary adaptations. However, in the absence of corresponding muscle activation patterns, incomplete muscle data recorded experimentally for different individuals during different feeding tasks are frequently substituted. This study uses finite element analysis (FEA) to examine the sensitivity of the mechanical response of a Macaca fascicularis cranium to varying muscle activation patterns predicted via multibody dynamic analysis. Relative to the effects of varying bite location, the consequences of simulated variations in muscle activation patterns and of the inclusion/exclusion of whole muscle groups were investigated. The resulting cranial deformations were compared using two approaches; strain maps and geometric morphometric analyses. The results indicate that, with bite force magnitude controlled, the variations among the mechanical responses of the cranium to bite location far outweigh those observed as a consequence of varying muscle activations. However, zygomatic deformation was an exception, with the activation levels of superficial masseter being most influential in this regard. The anterior portion of temporalis deforms the cranial vault, but the remaining muscles have less profound effects. This study for the first time systematically quantifies the sensitivity of an FEA model of a primate skull to widely varying masticatory muscle activations and finds that, with the exception of the zygomatic arch, reasonable variants of muscle loading for a second molar bite have considerably less effect on cranial deformation and the resulting strain map than does varying molar bite point. The implication is that FEA models of biting crania will generally produce acceptable estimates of deformation under load as long as muscle activations and forces are reasonably approximated. In any one FEA study, the biological significance of the error in applied muscle forces is best judged against the magnitude of the effect that is being investigated. PMID:22690885

Model Sensitivity and Use of the Comparative Finite Element Method in Mammalian Jaw Mechanics: Mandible Performance in the Gray Wolf

PubMed Central

Tseng, Zhijie Jack; Mcnitt-Gray, Jill L.; Flashner, Henryk; Wang, Xiaoming; Enciso, Reyes

2011-01-01

Finite Element Analysis (FEA) is a powerful tool gaining use in studies of biological form and function. This method is particularly conducive to studies of extinct and fossilized organisms, as models can be assigned properties that approximate living tissues. In disciplines where model validation is difficult or impossible, the choice of model parameters and their effects on the results become increasingly important, especially in comparing outputs to infer function. To evaluate the extent to which performance measures are affected by initial model input, we tested the sensitivity of bite force, strain energy, and stress to changes in seven parameters that are required in testing craniodental function with FEA. Simulations were performed on FE models of a Gray Wolf (Canis lupus) mandible. Results showed that unilateral bite force outputs are least affected by the relative ratios of the balancing and working muscles, but only ratios above 0.5 provided balancing-working side joint reaction force relationships that are consistent with experimental data. The constraints modeled at the bite point had the greatest effect on bite force output, but the most appropriate constraint may depend on the study question. Strain energy is least affected by variation in bite point constraint, but larger variations in strain energy values are observed in models with different number of tetrahedral elements, masticatory muscle ratios and muscle subgroups present, and number of material properties. These findings indicate that performance measures are differentially affected by variation in initial model parameters. In the absence of validated input values, FE models can nevertheless provide robust comparisons if these parameters are standardized within a given study to minimize variation that arise during the model-building process. Sensitivity tests incorporated into the study design not only aid in the interpretation of simulation results, but can also provide additional insights on form and function. PMID:21559475

Evolutionary Trends in the Jaw Adductor Mechanics of Ornithischian Dinosaurs.

PubMed

Nabavizadeh, Ali

2016-03-01

Jaw mechanics in ornithischian dinosaurs have been widely studied for well over a century. Most of these studies, however, use only one or few taxa within a given ornithischian clade as a model for feeding mechanics across the entire clade. In this study, mandibular mechanical advantages among 52 ornithischian genera spanning all subclades are calculated using 2D lever arm methods. These lever arm calculations estimate the effect of jaw shape and difference in adductor muscle line of action on relative bite forces along the jaw. Results show major instances of overlap between taxa in tooth positions at which there was highest mechanical advantage. A relatively low bite force is seen across the tooth row among thyreophorans (e.g., stegosaurs and ankylosaurs), with variation among taxa. A convergent transition occurs from a more evenly distributed bite force along the jaw in basal ornithopods and basal marginocephalians to a strong distal bite force in hadrosaurids and ceratopsids, respectively. Accordingly, adductor muscle vector angles show repeated trends from a mid-range caudodorsal orientation in basal ornithischians to a decrease in vector angles indicating more caudally oriented jaw movements in derived taxa (e.g., derived thyreophorans, basal ornithopods, lambeosaurines, pachycephalosaurs, and derived ceratopsids). Analyses of hypothetical jaw morphologies were also performed, indicating that both the coronoid process and lowered jaw joint increase moment arm length therefore increasing mechanical advantage of the jaw apparatus. Adaptive trends in craniomandibular anatomy show that ornithischians evolved more complex feeding apparatuses within different clades as well as morphological convergences between clades. © 2016 Wiley Periodicals, Inc.

Changes in biomechanical strain and morphology of rat calvarial sutures and bone after Tgf-β3 inhibition of posterior interfrontal suture fusion.

PubMed

Shibazaki-Yorozuya, Reiko; Wang, Qian; Dechow, Paul C; Maki, Koutaro; Opperman, Lynne A

2012-06-01

Craniofacial sutures are bone growth fronts that respond and adapt to biomechanical environments. Little is known of the role sutures play in regulating the skull biomechanical environment during patency and fusion conditions, especially how delayed or premature suture fusion will impact skull biomechanics. Tgf-β3 has been shown to prevent or delay suture fusion over the short term in rat skulls, yet the long-term patency or its consequences in treated sutures is not known. It was therefore hypothesized that Tgf-β3 had a long-term impact to prevent suture fusion and thus alter the skull biomechanics. In this study, collagen gels containing 3 ng Tgf-β3 were surgically placed superficial to the posterior interfrontal suture (IFS) and deep to the periosteum in postnatal day 9 (P9) rats. At P9, P24, and P70, biting forces and strains over left parietal bone, posterior IFS, and sagittal suture were measured with masticatory muscles bilaterally stimulated, after which the rats were sacrificed and suture patency analyzed histologically. Results demonstrated that Tgf-β3 treated sutures showed less fusion over time than control groups, and strain patterns in the skulls of the Tgf-β3-treated group were different from that of the control group. Although bite force increased with age, no alterations in bite force were attributable to Tgf-β3 treatment. These findings suggest that the continued presence of patent sutures can affect strain patterns, perhaps when higher bite forces are present as in adult animals. Copyright © 2012 Wiley Periodicals, Inc.

Endocrine differences among colour morphs in a lizard with alternative behavioural strategies.

PubMed

Yewers, Madeleine St Clair; Jessop, Tim S; Stuart-Fox, Devi

2017-07-01

Alternative behavioural strategies of colour morphs are expected to associate with endocrine differences and to correspond to differences in physical performance (e.g. movement speed, bite force in lizards); yet the nature of correlated physiological and performance traits in colour polymorphic species varies widely. Colour morphs of male tawny dragon lizards Ctenophorus decresii have previously been found to differ in aggressive and anti-predator behaviours. We tested whether known behavioural differences correspond to differences in circulating baseline and post-capture stress levels of androgen and corticosterone, as well as bite force (an indicator of aggressive performance) and field body temperature. Immediately after capture, the aggressive orange morph had higher circulating androgen than the grey morph or the yellow morph. Furthermore, the orange morph maintained high androgen following acute stress (30min of capture); whereas androgen increased in the grey and yellow morphs. This may reflect the previously defined behavioural differences among morphs as the aggressive response of the yellow morph is conditional on the colour of the competitor and the grey morph shows consistently low aggression. In contrast, all morphs showed an increase in corticosterone concentration after capture stress and morphs did not differ in levels of corticosterone stress magnitude (CSM). Morphs did not differ in size- and temperature-corrected bite force but did in body temperature at capture. Differences in circulating androgen and body temperature are consistent with morph-specific behavioural strategies in C. decresii but our results indicate a complex relationship between hormones, behaviour, temperature and bite force within and between colour morphs. Copyright © 2017 Elsevier Inc. All rights reserved.

Functional benefits of implants placed during ablative surgery: A 5-year prospective study on the prosthodontic rehabilitation of 56 edentulous oral cancer patients.

PubMed

Wetzels, Jan Willem; Koole, Ron; Meijer, Gert J; de Haan, Anton F J; Merkx, Matthias A W; Speksnijder, Caroline M

2016-04-01

The timing of placement as well as the functional benefit of interforaminal implants in edentulous patients treated for oral cancer is unclear. Fifty-six patients were recruited at 2 institutions. In 1 institution, interforaminal implants were placed during ablative surgery, the other institution used conventional prosthodontics with optional placement of implants postsurgery (postponed-placement). Masticatory performance, bite force, and subjective masticatory function were assessed before and 6 months, 1 year, and 5 years after surgery. Implant-retained overdentures (IODs) demonstrated the highest bite force and the least problems with solid food and food choice. Masticatory performance was equal for IODs and conventional dentures. After 5 years, IODs from patients in the during-ablative-surgery cohort tend to have higher bite force and masticatory performance than those from patients in the postponed-placement cohort. IODs produce the highest overall masticatory function. Implant placement during ablative surgery seems to be functionally beneficial. © 2016 Wiley Periodicals, Inc. Head Neck 38: E2103-E2111, 2016. © 2016 Wiley Periodicals, Inc.

[Study on the 3D mathematical mode of the muscle groups applied to human mandible by a linear programming method].

PubMed

Wang, Dongmei; Yu, Liniu; Zhou, Xianlian; Wang, Chengtao

2004-02-01

Four types of 3D mathematical mode of the muscle groups applied to the human mandible have been developed. One is based on electromyography (EMG) and the others are based on linear programming with different objective function. Each model contains 26 muscle forces and two joint forces, allowing simulation of static bite forces and concomitant joint reaction forces for various bite point locations and mandibular positions. In this paper, the method of image processing to measure the position and direction of muscle forces according to 3D CAD model was built with CT data. Matlab optimization toolbox is applied to solve the three modes based on linear programming. Results show that the model with an objective function requiring a minimum sum of the tensions in the muscles is reasonable and agrees very well with the normal physiology activity.

Fracture analysis of randomized implant-supported fixed dental prostheses

PubMed Central

Esquivel-Upshaw, Josephine F.; Mehler, Alex; Clark, Arthur E.; Neal, Dan; Anusavice, Kenneth J.

2014-01-01

Objective Fractures of posterior fixed dental all-ceramic prostheses can be caused by one or more factors including prosthesis design, flaw distribution, direction and magnitude of occlusal loading, and nature of supporting infrastructure (tooth root/implant), and presence of adjacent teeth. This clinical study of implant-supported, all-ceramic fixed dental prostheses, determined the effects of (1) presence of a tooth distal to the most distal retainer; (2) prosthesis loading either along the non-load bearing or load bearing areas; (3) presence of excursive contacts or maximum intercuspation contacts in the prosthesis; and (4) magnitude of bite force on the occurrence of veneer ceramic fracture. Methods 89 implant-supported FDPs were randomized as either a three-unit posterior metal-ceramic (Au-Pd-Ag alloy and InLine POM, Ivoclar, Vivadent) FDP or a ceramic-ceramic (ZirCAD and ZirPress, Ivoclar, Vivadent) FDP. Two implants (Osseospeed, Dentsply) and custom abutments (Atlantis, Dentsply) supported these FDPs, which were cemented with resin cement (RelyX Universal Cement). Baseline photographs were made with markings of teeth from maximum intercuspation (MI) and excursive function. Patients were recalled at 6 months and 1 to 3 years. Fractures were observed, their locations recorded, and images compared with baseline photographs of occlusal contacts. Conclusion No significant relationship exists between the occurrence of fracture and: (1) the magnitude of bite force; (2) a tooth distal to the most distal retainer; and (3) contacts in load-bearing or non-load-bearing areas. However, there was a significantly higher likelihood of fracture in areas with MI contacts only. Clinical Significance This clinical study demonstrates that there is a need to evaluate occlusion differently with implant-supported prostheses than with natural tooth supported prostheses because of the absence of a periodontal ligament. Implant supported prostheses should have minimal occlusion and lighter contacts than ones supported by natural dentition. PMID:25016139

Functional morphology and biomechanics of the tongue-bite apparatus in salmonid and osteoglossomorph fishes

PubMed Central

Camp, Ariel L; Konow, Nicolai; Sanford, Christopher P J

2009-01-01

The tongue-bite apparatus and its associated musculoskeletal elements of the pectoral girdle and neurocranium form the structural basis of raking, a unique prey-processing behaviour in salmonid and osteoglossomorph fishes. Using a quantitative approach, the functional osteology and myology of this system were compared between representatives of each lineage, i.e. the salmonid Salvelinus fontinalis (N =10) and the osteoglossomorph Chitala ornata(N = 8). Divergence was found in the morphology of the novel cleithrobranchial ligament, which potentially relates to kinematic differences between the raking lineage representatives. Salvelinus had greater anatomical cross-sectional areas of the epaxial, hypaxial and protractor hyoideus muscles, whereas Chitala had greater sternohyoideus and adductor mandibulae mass. Two osteology-based biomechanical models (a third-order lever for neurocranial elevation and a modified four-bar linkage for hyoid retraction) showed divergent force/velocity priorities in the study taxa. Salvelinus maximizes both force (via powerful cranial muscles) and velocity (through mechanical amplification) during raking. In contrast, Chitala has relatively low muscle force but more efficient force transmission through both mechanisms compared with Salvelinus. It remains unclear if and how behavioural modulation and specializations in the post-cranial anatomy may affect the force/velocity trade-offs in Chitala. Further studies of tongue-bite apparatus morphology and biomechanics in a broader species range may help to clarify the role that osteology and myology play in the evolution of behavioural diversity. PMID:19438765

Role of stag beetle jaw bending and torsion in grip on rivals.

PubMed

Goyens, Jana; Dirckx, Joris; Piessen, Maxim; Aerts, Peter

2016-01-01

In aggressive battles, the extremely large male stag beetle jaws have to withstand strongly elevated bite forces. We found several adaptations of the male Cyclommatus metallifer jaw morphology for enhanced robustness that conspecific females lack. As a result, males improve their grip on opponents and they maintain their safety factor (5.2-7.2) at the same level as that of females (6.8), despite their strongly elevated bite muscle force (3.9 times stronger). Males have a higher second moment of area and torsion constant than females, owing to an enhanced cross-sectional area and shape. These parameters also increase faster with increasing bending moment towards the jaw base in males than in females. Male jaws are more bending resistant against the bite reaction force than against perpendicular forces (which remain lower in battles). Because of the triangular cross section of the male jaw base, it twists more easily than it bends. This torsional flexibility creates a safety system against overload that, at the same time, secures a firm grip on rivals. We found no structural mechanical function of the large teeth halfway along the male jaws. Therefore, it appears that the main purpose of these teeth is a further improvement of grip on rivals. © 2016 The Author(s).

Role of stag beetle jaw bending and torsion in grip on rivals

PubMed Central

Goyens, Jana; Dirckx, Joris; Piessen, Maxim; Aerts, Peter

2016-01-01

In aggressive battles, the extremely large male stag beetle jaws have to withstand strongly elevated bite forces. We found several adaptations of the male Cyclommatus metallifer jaw morphology for enhanced robustness that conspecific females lack. As a result, males improve their grip on opponents and they maintain their safety factor (5.2–7.2) at the same level as that of females (6.8), despite their strongly elevated bite muscle force (3.9 times stronger). Males have a higher second moment of area and torsion constant than females, owing to an enhanced cross-sectional area and shape. These parameters also increase faster with increasing bending moment towards the jaw base in males than in females. Male jaws are more bending resistant against the bite reaction force than against perpendicular forces (which remain lower in battles). Because of the triangular cross section of the male jaw base, it twists more easily than it bends. This torsional flexibility creates a safety system against overload that, at the same time, secures a firm grip on rivals. We found no structural mechanical function of the large teeth halfway along the male jaws. Therefore, it appears that the main purpose of these teeth is a further improvement of grip on rivals. PMID:26763329

Morphometry, bite-force, and paleobiology of the late miocene caiman Purussaurus brasiliensis.

PubMed

Aureliano, Tito; Ghilardi, Aline M; Guilherme, Edson; Souza-Filho, Jonas P; Cavalcanti, Mauro; Riff, Douglas

2015-01-01

Purussaurus brasiliensis thrived in the northwestern portion of South America during the Late Miocene. Although substantial material has been recovered since its early discovery, this fossil crocodilian can still be considered as very poorly understood. In the present work, we used regression equations based on modern crocodilians to present novel details about the morphometry, bite-force and paleobiology of this species. According to our results, an adult Purussaurus brasiliensis was estimated to reach around 12.5 m in length, weighing around 8.4 metric tons, with a mean daily food intake of 40.6 kg. It was capable of generating sustained bite forces of 69,000 N (around 7 metric tons-force). The extreme size and strength reached by this animal seems to have allowed it to include a wide range of prey in its diet, making it a top predator in its ecosystem. As an adult, it would have preyed upon large to very large vertebrates, and, being unmatched by any other carnivore, it avoided competition. The evolution of a large body size granted P. brasiliensis many advantages, but it may also have led to its vulnerability. The constantly changing environment on a large geological scale may have reduced its long-term survival, favoring smaller species more resilient to ecological shifts.

Morphometry, Bite-Force, and Paleobiology of the Late Miocene Caiman Purussaurus brasiliensis

PubMed Central

Aureliano, Tito; Ghilardi, Aline M.; Guilherme, Edson; Souza-Filho, Jonas P.; Cavalcanti, Mauro; Riff, Douglas

2015-01-01

Purussaurus brasiliensis thrived in the northwestern portion of South America during the Late Miocene. Although substantial material has been recovered since its early discovery, this fossil crocodilian can still be considered as very poorly understood. In the present work, we used regression equations based on modern crocodilians to present novel details about the morphometry, bite-force and paleobiology of this species. According to our results, an adult Purussaurus brasiliensis was estimated to reach around 12.5 m in length, weighing around 8.4 metric tons, with a mean daily food intake of 40.6 kg. It was capable of generating sustained bite forces of 69,000 N (around 7 metric tons-force). The extreme size and strength reached by this animal seems to have allowed it to include a wide range of prey in its diet, making it a top predator in its ecosystem. As an adult, it would have preyed upon large to very large vertebrates, and, being unmatched by any other carnivore, it avoided competition. The evolution of a large body size granted P. brasiliensis many advantages, but it may also have led to its vulnerability. The constantly changing environment on a large geological scale may have reduced its long-term survival, favoring smaller species more resilient to ecological shifts. PMID:25689140

The Biomechanics Behind Extreme Osteophagy in Tyrannosaurus rex.

PubMed

Gignac, Paul M; Erickson, Gregory M

2017-05-17

Most carnivorous mammals can pulverize skeletal elements by generating tooth pressures between occluding teeth that exceed cortical bone shear strength, thereby permitting access to marrow and phosphatic salts. Conversely, carnivorous reptiles have non-occluding dentitions that engender negligible bone damage during feeding. As a result, most reptilian predators can only consume bones in their entirety. Nevertheless, North American tyrannosaurids, including the giant (13 metres [m]) theropod dinosaur Tyrannosaurus rex stand out for habitually biting deeply into bones, pulverizing and digesting them. How this mammal-like capacity was possible, absent dental occlusion, is unknown. Here we analyzed T. rex feeding behaviour from trace evidence, estimated bite forces and tooth pressures, and studied tooth-bone contacts to provide the answer. We show that bone pulverization was made possible through a combination of: (1) prodigious bite forces (8,526-34,522 newtons [N]) and tooth pressures (718-2,974 megapascals [MPa]) promoting crack propagation in bones, (2) tooth form and dental arcade configurations that concentrated shear stresses, and (3) repetitive, localized biting. Collectively, these capacities and behaviors allowed T. rex to finely fragment bones and more fully exploit large dinosaur carcasses for sustenance relative to competing carnivores.

Linear versus geometric morphometric approaches for the analysis of head shape dimorphism in lizards.

PubMed

Fabre, Anne-Claire; Cornette, Raphäel; Huyghe, Katleen; Andrade, Denis V; Herrel, Anthony

2014-09-01

Differences between the sexes may arise because of differences in reproductive strategy, with females investing more in traits related to reproductive output and males investing more in traits related to resource holding capacity and territory defence. Sexual dimorphism is widespread in lizards and in many species males and females also differ in head shape. Males typically have bigger heads than females resulting in intersexual differences in bite force. Whereas most studies documenting differences in head dimensions between sexes use linear dimensions, the use of geometric morphometrics has been advocated as more appropriate to characterize such differences. This method may allow the characterization of local shape differences that may have functional consequences, and provides unbiased indicators of shape. Here, we explore whether the two approaches provide similar results in an analyses of head shape in Tupinambis merianae. The Argentine black and white tegu differs dramatically in body size, head size, and bite force between the sexes. However, whether the intersexual differences in bite force are simply the result of differences in head size or whether more subtle modifications (e.g., in muscle insertion areas) are involved remains currently unknown. Based on the crania and mandibles of 19 lizards with known bite force, we show intersexual differences in the shape of the cranium and mandible using both linear and geometric morphometric approaches. Although both types of analyses showed generally similar results for the mandible, this was not the case for the cranium. Geometric morphometric approaches provided better insights into the underlying functional relationships between the cranium and the jaw musculature, as illustrated by shape differences in muscle insertion areas not detected using linear morphometric data. © 2014 Wiley Periodicals, Inc.

Adaptive changes in anticipatory postural adjustments with novel and familiar postural supports.

PubMed

Hall, Leanne M; Brauer, Sandra; Horak, Fay; Hodges, Paul W

2010-02-01

Anticipatory postural adjustments (APAs) serve to stabilize posture prior to initiation of voluntary movement. This study examined the effects of changes in postural support on APAs using novel and familiar support paradigms. We also investigated whether postural strategies were refined with practice and how the CNS responded when multiple supports were available. Twelve healthy subjects stood on dual force platforms and performed 20 randomized left and right rapid leg-lift tasks in response to a visual cue under four conditions: unsupported, bilateral handgrip, bite plate, and a combined handgrip and bite plate condition. Vertical ground reaction forces, electromyography of limb, trunk and jaw muscles, and forces exerted on the support apparatus were recorded. Shift in center-of-pressure amplitude and duration were reduced with increased support. Muscles were recruited in advance of the focal movement when able to contribute to stability, and activity was modulated based on the amount of support available. The CNS adapted anticipatory postural strategies immediately with changes in condition regardless of familiarity with the support; however, adaptation was only complete at the first repetition in conditions that involved familiar support strategies. Tasks that involved a novel bite strategy continued to adapt with practice. In the multiple support condition, both hand and bite strategies were immediately incorporated; however, the contribution of each was not identical to conditions where supports were provided individually. This study emphasizes the flexibility of the CNS to organize postural strategies to meet the demands of postural stability in both familiar and novel situations.

Open bite: diagnosis, treatment and stability.

PubMed

Matsumoto, Mírian Aiko Nakane; Romano, Fábio Lourenço; Ferreira, José Tarcísio Lima; Valério, Rodrigo Alexandre

2012-01-01

Open bite has fascinated Orthodontics due to the difficulties regarding its treatment and maintenance of results. This anomaly has distinct characteristics that, in addition to the complexity of multiple etiological factors, have aesthetic and functional consequences. Within this etiological context, several types of mechanics have been used in open bite treatment, such as palatal crib, orthopedic forces, occlusal adjustment, orthodontic camouflage with or without extraction, orthodontic intervention using mini-implants or mini-plates, and even orthognathic surgery. An accurate diagnosis and etiological determination are always the best guides to establish the objectives and the ideal treatment plan for such a malocclusion. This report describes two cases of open bite. At the end of the treatment, both patients had their canines and molars in Class I occlusion, normal overjet and overbite, and stability during the posttreatment period.

Epidemiological profile of snake-bite cases from Haryana: A five year (2011-2015) retrospective study.

PubMed

Bhargava, Saurabh; Kaur, Ramanjeet; Singh, Rajvinder

2018-02-01

Varieties of venomous snakes inhabit in the world which accidentally take thousands of human lives every year. This severe medical emergency constantly persuades national and international health agencies to look at efficient epidemiological profiling of snake-bite cases for the proper management of this sympathetic problem. Establishing the accurate database of snake-bite in humans from different localities of India may perhaps lack certainty due to few inevitable reasons such as consideration of this problem as less emergent problem in disparity to pesticide poisoning, difficulty in the accessibility to rural and tribal areas where chances of snake-bite remain ceiling, lack of inspiring models of snake-bite management training, reduced reporting system, and pitiable maintenance of hospital data in India. Therefore, the present modest study was carried out to explore valuable information regarding snake-bite problem in Haryana. Factual data on snake-bite incidences happened from 2011 to 2015 were collected from government hospitals and medical institutes of Haryana. This retrospective study disclosed a few characteristic points related to the frequency of snake-bite cases, gender involved, anti-snake venom (ASV) treatment, and numbers of deaths with snake-bite. Records revealed a total of 6555 cases of snake-bite including 130 deaths reported in Haryana during the study period. A significant variation in the occurrence of snake-bite cases was also recorded in different areas of Haryana. There was a huge database of recorded snake-bite cases from government medical institute but district wise survey disclosed the maximum number of snake-bite incidences, especially amongst males from Panchkula. The present study has provided a more updated and comprehensive record of snake-bite from Haryana during 2011-2015. A huge burden of snake-bite amongst human was found in Haryana; hence, the findings of this study purposely enlighten people about the size of this problem in the selected region. However, this study also remained limited due to lack of information on a few important parameters and availability of homogeneous data. Copyright © 2017 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

The Feeding Biomechanics and Dietary Ecology of Paranthropus boisei

PubMed Central

Smith, Amanda L.; Benazzi, Stefano; Ledogar, Justin A.; Tamvada, Kelli; Pryor Smith, Leslie C.; Weber, Gerhard W.; Spencer, Mark A.; Lucas, Peter W.; Michael, Shaji; Shekeban, Ali; Al-Fadhalah, Khaled; Almusallam, Abdulwahab S.; Dechow, Paul C.; Grosse, Ian R.; Ross, Callum F.; Madden, Richard H.; Richmond, Brian G.; Wright, Barth W.; Wang, Qian; Byron, Craig; Slice, Dennis E.; Wood, Sarah; Dzialo, Christine; Berthaume, Michael A.; Casteren, Adam Van; Strait, David S.

2015-01-01

The African Plio-Pleistocene hominins known as australopiths evolved derived craniodental features frequently interpreted as adaptations for feeding on either hard, or compliant/tough foods. Among australopiths, Paranthropus boisei is the most robust form, exhibiting traits traditionally hypothesized to produce high bite forces efficiently and strengthen the face against feeding stresses. However, recent mechanical analyses imply that P. boisei may not have been an efficient producer of bite force and that robust morphology in primates is not necessarily strong. Here we use an engineering method, finite element analysis, to show that the facial skeleton of P. boisei is structurally strong, exhibits a strain pattern different from that in chimpanzees (Pan troglodytes) and Australopithecus africanus, and efficiently produces high bite force. It has been suggested that P. boisei consumed a diet of compliant/tough foods like grass blades and sedge pith. However, the blunt occlusal topography of this and other species suggests that australopiths are adapted to consume hard foods, perhaps including grass and sedge seeds. A consideration of evolutionary trends in morphology relating to feeding mechanics suggests that food processing behaviors in gracile australopiths evidently were disrupted by environmental change, perhaps contributing to the eventual evolution of Homo and Paranthropus. PMID:25529240

Epidemiological aspects of snake bites on a Liberian rubber plantation.

PubMed

Stahel, E

1980-12-01

During a one-year period 95 patients with a history of snake bite were admitted to the hospital of a Liberian rubber plantation. The population at risk included the field workers (tappers and slashers) with an incidence of 4.2 symptomatic snake bites per thousand per year. The incidence of symptomatic bites was 1.7 per thousand in the group of non-field employees and 0.4 per thousand per year in the group of non-employees. The temporary disability was between 3 and 5 days, and the loss of workings days due to snake bites was one day per 10,000 working days on the plantation. Among the 95 patients 27 did not show any symptoms of envenoming except occasional fang marks. 64 patients developed cytotoxic symptoms alone. In this group, the night adder (Causus maculatus) was the main responsible snake. 4 patients showed signs of systemic envenoming. Two were haematological and two were neurological in nature and caused by Bitis species and Naja species, respectively. No fatalities were noted. A definite maximum of snake bites was observed during October and November which corresponds to the transition from rainy to dry season.

Animal and human bite injuries: a 5-year retrospective study in a large urban public hospital in Venezuela.

PubMed

Gelvez, Muñoz; Enrique, Ruben; Gajos, Golaszewski; Bladimir, Jose; Carvajal, Diaz; Luis, Alvaro

2017-12-01

Animal bite injuries to the head and neck regions are an important public health problem. Most of these bites are from dogs. A 10-year retrospective study was undertaken to determine the prevalence of animal and human bites. This retrospective study was done from January 2011 to December 2016 and included 387 patients with a mean age of 21.51 years. Data collection included age, sex, days of hospitalization, lesion type, and clinical management. Majority of patients were in age group of 21-29 years, followed by 31-55 years. Out of the total 281 patients, 42 patients (51.60%) were males and 34 patients (48.40%) were females. Mean hospital stay was 7.2 days with a minimum of 5 days and a maximum of 12 days. Surgical management included cleansing and primary closure of the wound. We concluded that the use of empiric antibiotic prophylaxis is essential for management of facial animal bite, and the antibiotic of first choice is amoxicillin-clavulanic acid. The aim of immediate surgical repair (< 6 h) is to avoid infections. The persistence of dog bite is public health problem in Venezuela.

Simulation of a flow around biting teeth

NASA Astrophysics Data System (ADS)

Narusawa, Hideaki; Yamamoto, Eriko; Kuwahara, Kunio

2008-11-01

We simulated a flow around biting teeth. The decayed tooth is a disease that a majority of people are annoyed. These are often generated from a deep groove at occlusal surface. It is known that a person who bites well doesn't suffer from a decayed tooth easily. Biting forces reach as much as 60 kg/cm^2 by an adult male, and when chewing, upper and lower teeth approach to bite by those forces. The crushed food mixed with saliva becomes high viscosity fluid, and is pushed out of ditches of teeth in the direction of the cheek or the tongue. Teeth with complex three dimension curved surface are thought to form venturi at this time, and to generate big pressure partially. An excellent dental articulation will possibly help a natural generation of a flow to remove dental plaque, i.e. the cause of the decayed tooth. Moreover, the relation of this flow with the destruction of the filled metal or the polymer is doubted. In this research, we try to clarify the pressure distributions by this flow generation as well as its dynamics when chewing. One of our goals is to enable an objective design of the shape of the dental fillings and the artificial tooth. Tooth has a very small uneven ground and a bluff body. In this case, to calculate a computational numerical simulation to solve the Navier-Stokes equations three dimension Cartesian coordinate system is employed.

Reperfusion response changes induced by repeated, sustained contractions in normal human masseter muscle.

PubMed

Aizawa, Shigeru; Tsukiyama, Yoshihiro; Koyano, Kiyoshi; Clark, Glenn T

2002-07-01

The purpose was to evaluate the intramuscular reperfusion response characteristics associated with repeated isometric contractions in normal human masseter. Intramuscular blood volume was quantified with a near-infrared spectroscopic device that measured the total haemoglobin (Hb) concentration in the muscle. Electromyographic (EMG) activity from the masseter and total bite forces were also recorded. Sixteen healthy volunteers, eight females and eight males, without masticatory muscle pain participated. They were asked first to clench their teeth for as long as possible at 50% of their maximum voluntary contraction (MVC). This was followed by a 60s rest and then immediately by a standard clenching task (50% MVC for 30s) and a 60s recovery period, immediately after which they were asked to repeat exactly the same procedure, with a final 5 min recovery period after the second 30s contraction. Bite force, EMG and Hb concentration were measured continuously and the duration of the two endurance tasks and the amplitudes of all recorded signals were compared (first trial versus second trial). Specifically, the difference between the lowest Hb (trough) seen during the standardised 30s contractions and the highest (peak) seen just after them was assessed. The trough-to-peak difference in Hb concentration of the second standard contraction task was significantly smaller than that of the first standard task (P<0.05, paired t-test). These data show that with sustained effort the post-contraction vasodilatory reperfusion responses of the human masseter are diminished, suggesting a progressive desensitisation of the vasodilatory system.

Changes of bite force and occlusal contacts in the retention phase of orthodontic treatment: A controlled clinical trial.

PubMed

Varga, Suzana; Spalj, Stjepan; Anic Milosevic, Sandra; Lapter Varga, Marina; Mestrovic, Senka; Trinajstic Zrinski, Magda; Slaj, Mladen

2017-12-01

We aimed to determine whether appliance type affects changes in maximum voluntary bite force (MVBF) and the number of occlusal contacts (NOC) during retention, controlling for sex, age, and body mass index. The sample comprised 176 examinees (70 male, 106 female) aged 14 to 20 years: 30 had maxillary and mandibular Essix retainers, 30 had wrap-around retainers, and 30 had a combination of fixed mandibular canine-to-canine retainers bonded on each tooth separately (double twisted, 0.254 mm in diameter, stainless steel ligature wire) and Essix retainer in the maxillary arch; 86 with normal occlusion were not treated. MVBF and the NOC were measured immediately after removal of preadjusted edgewise appliances (Roth prescription), 6 weeks after that, and after the next 4 weeks. Increases in MVBF and the NOC were demonstrated, but subjects with 2 Essix retainers showed lower values than did the others. Changes were related to type of appliance, sex, and age (P <0.05) but not to body mass index. The increase in NOC occurred faster than the increase of MVBF, more and sooner with the wrap-around retainer and in male subjects than with the Essix and in female subjects. MVBF and NOC nearly reached the values of the control subjects. Settling of the occlusion depends on appliance type: it takes longer in female patients and with Essix in both dental arches than with the other tested appliances. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Biomechanical Evaluation of Different Musculoskeletal Arrangements in Psittacosaurus and Implications for Cranial Function.

PubMed

Taylor, Adam C; Lautenschlager, Stephan; Qi, Zhao; Rayfield, Emily J

2017-01-01

The masseter muscle complex is a unique feature of extant mammals and their advanced cynodont precursors, originating from the zygomatic arch and inserting onto the lateral surface of the dentary. This muscle complex is absent in sauropsids, with the exception of the neomorphic m. pseudomasseter complex that is unique to psittaciform birds (parrots and cockatiels). The anterior position and anterodorsally inclined line of action of both muscle groups increases leverage of the jaw and is thought to contribute to increased bite force, particularly in psittaciforms. A corollary is that in mammals at least, the masseter places increased load on the zygomatic arch, which may be withstood by soft tissue temporal fascia. Recently the existence of a m. pseudomasster (mPSM) and m. adductor mandibulae externus ventralis (mAMEV) has been proposed in the ornithischian dinosaur Psittacosaurus. Here we use computed tomography, digital restoration of skull anatomy and adductor musculature and computational biomechanics to test how the presence of anterodorsally inclined muscle loads influences stress, strain, deformation and estimated bite forces in the skull of Psittacosaurus. We find that the m. pseudomasseter and m. amev increases bite force with an associated increase in cranial stress and deformation. There is, however, limited osteological evidence for the existence of these two additional muscles in the psittacosaur skull and geometric morphometric informed sensitivity analysis of our finite element models shows that bite position has a greater effect on loading-induced deformation than muscle loading or material property variation. Anat Rec, 300:49-61, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

[The influences of the stress distribution on the condylar cartilage surface by Herbst appliance under various bite reconstruction--a three dimensional finite element analysis].

PubMed

Hu, L; Zhao, Z; Song, J; Fan, Y; Jiang, W; Chen, J

2001-02-01

The distribution of stress on the surface of condylar cartilage was investigated. Three-dimensional model of the 'Temporomandibular joint mandible Herbst appliance system' was set up by SUPER SAP software (version 9.3). On this model, various bite reconstruction was simulated according to specified advanced displacement and vertical bite opening. The distribution of maximum and minimum principal stress on the surface of condylar cartilage were computerized and analyzed. When Herbst appliance drove the mandible forward, the anterior condyle surface was compressed while the posterior surface was drawn. The trend of stress on the same point on the condyle surface was consistent in various reconstruction conditions, but the trend of stress on various point were different in same reconstruction conditions. All five groups of bite reconstruction (3-7 mm advancement, 4-2 mm vertical bite opening of the mandible) designed by this study can be selected in clinic according to the patient's capability of adaptation, the extent of malocclusion and the potential and direction of growth.

[Evaluation of the efficacity of coconut (Cocos nucifera), palm nut (Eleais guineensis) and gobi (Carapa procera) lotions and creams in indivirual protection against Simulium damnosum s.l. bites in Côte d'Ivoire].

PubMed

Sylla, M; Konan, L; Doannio, J M; Traoré, S

2003-05-01

With the interruption of larva treatments done by OCP as part of onchocerciasis control in West Africa, Simulium came back in abundance in forest regions and savannah fertile valleys. In addition to the severe discomfort, nuisance by Simulium is in certain cases incompatible with land use. Since ground treatment of larval breading sites using insecticides is not always possible or efficient, it is therefore a necessity to develop other methods among which individual protection against Simulium bites. The general objective of our study was to evaluate different vegetable oil compound repellent formulas against Simulium bites. Activities were carried out in savannah zone (Niakaramandougou) and in forest zone (Soubré) in Côte d'Ivoire. The methodology consisted in catching blackflies on volunteers whose legs were rubbed with a repellent. Gobi raw oil and coconut, palm nut and gobi formulas (lotions and creams) were tested. During each session, which lasted from 07:00 am to 12:00 and from 03:00 pm to 06:00 pm, one person did not apply any repellent and was used as the control person. The results of our experimentations show that for a given zone (savannah, forest), a repellent (coconut, palm nut, gobi) and a compound (shea butter, vaseline), there is no significant difference between protection rates obtained with lotions (maximum: 21 bites/person/day) and those obtained with creams (maximum: 30 bites/person/day). In other respects, the lotion of a given repellent seems to be efficient in savannah as in the forest, in protecting against Simulium bites. It is the same situation with creams. So, repellents can be an efficient solution against Simulium nuisance. However, experimentations should continue to confirm the high repellency of tested formulas, proceed to the identification of principles and evaluate the toxicity and irritant effect of repellents to be applied on the skin.

Go big or go fish: morphological specializations in carnivorous bats.

PubMed

Santana, Sharlene E; Cheung, Elena

2016-05-11

Specialized carnivory is relatively uncommon across mammals, and bats constitute one of the few groups in which this diet has evolved multiple times. While size and morphological adaptations for carnivory have been identified in other taxa, it is unclear what phenotypic traits characterize the relatively recent evolution of carnivory in bats. To address this gap, we apply geometric morphometric and phylogenetic comparative analyses to elucidate which characters are associated with ecological divergence of carnivorous bats from insectivorous ancestors, and if there is morphological convergence among independent origins of carnivory within bats, and with other carnivorous mammals. We find that carnivorous bats are larger and converged to occupy a subset of the insectivorous morphospace, characterized by skull shapes that enhance bite force at relatively wide gapes. Piscivorous bats are morphologically distinct, with cranial shapes that enable high bite force at narrow gapes, which is necessary for processing fish prey. All animal-eating species exhibit positive allometry in rostrum elongation with respect to skull size, which could allow larger bats to take relatively larger prey. The skull shapes of carnivorous bats share similarities with generalized carnivorans, but tend to be more suited for increased bite force production at the expense of gape, when compared with specialized carnivorans. © 2016 The Author(s).

Go big or go fish: morphological specializations in carnivorous bats

PubMed Central

Santana, Sharlene E.; Cheung, Elena

2016-01-01

Specialized carnivory is relatively uncommon across mammals, and bats constitute one of the few groups in which this diet has evolved multiple times. While size and morphological adaptations for carnivory have been identified in other taxa, it is unclear what phenotypic traits characterize the relatively recent evolution of carnivory in bats. To address this gap, we apply geometric morphometric and phylogenetic comparative analyses to elucidate which characters are associated with ecological divergence of carnivorous bats from insectivorous ancestors, and if there is morphological convergence among independent origins of carnivory within bats, and with other carnivorous mammals. We find that carnivorous bats are larger and converged to occupy a subset of the insectivorous morphospace, characterized by skull shapes that enhance bite force at relatively wide gapes. Piscivorous bats are morphologically distinct, with cranial shapes that enable high bite force at narrow gapes, which is necessary for processing fish prey. All animal-eating species exhibit positive allometry in rostrum elongation with respect to skull size, which could allow larger bats to take relatively larger prey. The skull shapes of carnivorous bats share similarities with generalized carnivorans, but tend to be more suited for increased bite force production at the expense of gape, when compared with specialized carnivorans. PMID:27170718

Craniomandibular System and Postural Balance after 3-Day Dry Immersion

PubMed Central

Treffel, Loïc; Dmitrieva, Liubov; Gauquelin-Koch, Guillemette; Custaud, Marc-Antoine; Blanc, Stéphane; Gharib, Claude; Millet, Catherine

2016-01-01

The objective of the study was to determine the influence of simulated microgravity by exposure to dry immersion on the craniomandibular system. Twelve healthy male volunteers participated in a 3-day dry immersion study. Before and immediately after exposure we measured maximal bite force using piezoresistive sensors. The mechanical properties of the jaw and cervical muscles were evaluated before, during, and after dry immersion using MyotonPRO. Because recent studies reported the effects of jaw motor activity on the postural stability of humans, stabilometric measurements of center of pressure were performed before and after dry immersion in two mandibular positions: rest position without jaw clenching, and intercuspidal position during voluntary teeth clenching. Results revealed no significant changes of maximal bite force after dry immersion. All postural parameters were significantly altered by dry immersion. There were however no significant differences in stabilometric data according to mandibular position. Moreover the masseter tonicity increased immediately after the end of dry immersion period. Dry immersion could be used as a valid model for studying the effects of microgravity on human subjects. However, 3 days appear insufficient in duration to evaluate the effects of weightlessness on maximal bite force. Our research suggests a link between postural disturbance after dry immersion and masseter tonicity. PMID:26913867

Chewing efficiency, bite force and oral health-related quality of life with narrow diameter implants - a prospective clinical study: results after one year.

PubMed

Enkling, Norbert; Saftig, Marcus; Worni, Andreas; Mericske-Stern, Regina; Schimmel, Martin

2017-04-01

This prospective study aimed to investigate the evolution of chewing efficiency, maximum voluntary bite force (MBF) and oral health-related quality of life (OHRQoL) in edentulous patients treated with narrow diameter implants (NDIs) over the course of 1 year. Four NDIs (MDI ® , 3M ESPE, diameter 1.8 mm) were placed interforaminally in 20 edentulous patients. They were immediately loaded by converting the existing prosthesis into an implant overdenture. Participants were examined six times pre- and postoperatively [baseline (BL) to week 52 (w52)]. Chewing efficiency was evaluated with a colour-mixing ability test by evaluation of the standard deviation of hue (VOH, ViewGum©). MBF was measured using a digital force gauge. OHRQoL was determined with the Oral Health Impact Profile (OHIPG49). Nonparametric Brunner-Langer models were applied for statistical testing. The study failed to demonstrate an effect on chewing efficiency. MBF increased continuously during the observation period (medians: MBF[N]@BL = 46.6 [iqr 50.1]; MBF[N]@w52 = 103.9 [iqr 76.0]; P = 0.002). OHRQoL increased steeply after implant loading and continued improving (medians: BL ∑OHIPG49 = 31 [iqr 40.0]; w4 ∑OHIPG49 = 11.5 [iqr 19.5]; w52 ∑OHIPG49 = 6 [iqr 13.0], P < 0.001). The stabilisation of a lower complete prosthesis with four NDIs is a feasible minimally invasive and economical approach to improve oral function and OHRQoL, especially in elderly patients with limited bone support. Functional benefits might be more evident if patients receive chewing instructions. Larger studies need to confirm a positive effect on chewing efficiency and develop long-term maintenance solutions if patients become frail because no easy downgrading approaches of one-piece titanium implants exist. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Comparative Biomechanical Modeling of Metatherian and Placental Saber-Tooths: A Different Kind of Bite for an Extreme Pouched Predator.

PubMed

Wroe, Stephen; Chamoli, Uphar; Parr, William C H; Clausen, Philip; Ridgely, Ryan; Witmer, Lawrence

2013-01-01

Questions surrounding the dramatic morphology of saber-tooths, and the presumably deadly purpose to which it was put, have long excited scholarly and popular attention. Among saber-toothed species, the iconic North American placental, Smilodon fatalis, and the bizarre South American sparassodont, Thylacosmilus atrox, represent extreme forms commonly forwarded as examples of convergent evolution. For S. fatalis, some consensus has been reached on the question of killing behaviour, with most researchers accepting the canine-shear bite hypothesis, wherein both head-depressing and jaw closing musculatures played a role in delivery of the fatal bite. However, whether, or to what degree, T. atrox may have applied a similar approach remains an open question. Here we apply a three-dimensional computational approach to examine convergence in mechanical performance between the two species. We find that, in many respects, the placental S. fatalis (a true felid) was more similar to the metatherian T. atrox than to a conical-toothed cat. In modeling of both saber-tooths we found that jaw-adductor-driven bite forces were low, but that simulations invoking neck musculature revealed less cranio-mandibular stress than in a conical-toothed cat. However, our study also revealed differences between the two saber-tooths likely reflected in the modus operandi of the kill. Jaw-adductor-driven bite forces were extremely weak in T. atrox, and its skull was even better-adapted to resist stress induced by head-depressors. Considered together with the fact that the center of the arc described by the canines was closer to the jaw-joint in Smilodon, our results are consistent with both jaw-closing and neck musculature playing a role in prey dispatch for the placental, as has been previously suggested. However, for T. atrox, we conclude that the jaw-adductors probably played no major part in the killing bite. We propose that the metatherian presents a more complete commitment to the already extreme saber-tooth 'lifestyle'.

Design and clinical outcome of a novel 3D-printed prosthetic joint replacement for the human temporomandibular joint.

PubMed

Ackland, David; Robinson, Dale; Lee, Peter Vee Sin; Dimitroulis, George

2018-05-11

Stock prosthetic temporomandibular joint replacements come in limited sizes, and do not always encompass the joint anatomy that presents clinically. The aims of this study were twofold. Firstly, to design a personalized prosthetic total joint replacement for the treatment of a patient's end-stage temporomandibular joint osteoarthritis, to implant the prosthesis into the patient, and assess clinical outcome 12-months post-operatively; and secondly, to evaluate the influence of changes in prosthetic condyle geometry on implant load response during mastication. A 48-year-old female patient with Grade-5 osteoarthritis to the left temporomandibular joint was recruited, and a prosthesis developed to match the native temporomandibular joint anatomy. The prosthesis was 3D printed, sterilized and implanted into the patient, and pain and function measured 12-months post-operatively. The prosthesis load response during a chewing-bite and maximum-force bite was evaluated using a personalized multi-body musculoskeletal model. Simulations were performed after perturbing condyle thickness, neck length and head sphericity. Increases in prosthetic condyle neck length malaligned the mandible and perturbed temporomandibular joint force. Changes in condylar component thickness greatly influenced fixation screw stress response, while a more eccentric condylar head increased prosthetic joint-contact loading. Post-operatively, the prosthetic temporomandibular joint surgery reduced patient pain from 7/10 to 1/10 on a visual analog scale, and increased intercisal opening distance from 22 mm to 38 mm. This study demonstrates effectiveness of a personalized prosthesis that may ultimately be adapted to treat a wide-range of end-stage temporomandibular joint conditions, and highlights sensitivity of prosthesis load response to changes in condylar geometry. Copyright © 2018 Elsevier Ltd. All rights reserved.

Musculoskeletal anatomy and feeding performance of pre-feeding engyodontic larvae of the European eel (Anguilla anguilla).

PubMed

Bouilliart, Mathias; Tomkiewicz, Jonna; Lauesen, Peter; De Kegel, Barbara; Adriaens, Dominique

2015-09-01

Being part of the elopomorph group of fishes, Anguillidae species show a leptocephalus larval stage. However, due to largely unknown spawning locations and habitats of their earliest life stages, as well as their transparency, these Anguilla larvae are rarely encountered in nature. Therefore, information regarding the early life history of these larvae, including their exogenous feeding strategy and feeding performance, is rather scarce. To better understand the structural basis and functional performance of larval feeding in captivity, the functional morphology of the cranial musculoskeletal system in pre- and first-feeding engyodontic leptocephali of the European eel (Anguilla anguilla) was studied. A 3D reconstruction of the feeding apparatus (head of the leptocephali < 1 mm) was used to visualize and describe the musculoskeletal changes throughout these stages. To analyze the ontogenetic changes in the functionality of the feeding apparatus towards the active feeding phase, 3D data of joints, levers and muscles derived from the reconstructions were used to estimate bite and joint reaction forces (JRFs). Observing a maximum estimated bite force of about 65 μN (and corresponding JRFs of 260 μN), it can be hypothesized that leptocephalus larvae are functionally constrained to feed only on soft food particles. Additionally, potential prey items are size delimited, based on the theoretically estimated average gape of these larvae of about 100 μm. This hypothesis appears to be in line with recent observations of a diet consisting of small and/or gelatinous prey items (Hydrozoa, Thaliacea, Ctenophora, Polycystenia) found in the guts of euryodontic leptocephalus larvae. © 2015 Anatomical Society.

Efficacy of denture adhesives in maxillary dentures using gnathodynamometry: a comparative study.

PubMed

Polyzois, Gregory; Lagouvardos, Panagiotis; Frangou, Maria; Stefaniotis, Theodoros

2011-07-01

The purpose of this study was to investigate the effect of four commercially available denture adhesives on the incisal and premolar dislodgement forces of maxillary complete dentures by using an electronic and disposable gnathodynamometer and compare the measured incisal forces for differences. This study was conducted with 12 complete maxillary denture wearers. Four commercially available denture adhesives Super Corega(®), Corega Ultra(®), Super Corega Powder(®) and Fittydent Cationic(®) were investigated. Testing protocol and sequence included baseline measurements without adhesives (control) for previous and new dentures and then replications of measurements with the four adhesives. Maximum dislodgement forces were recorded in two sites between central incisors and the left 2nd premolars by using an electronic and disposable gnathodynamometer. To estimate the effect of the different adhesives on the dislodgement forces, data were analyzed by a 2- and 3-way ANOVA, while for estimating the agreement of the two devices a Bland-Altman and Mountain plots were used. ANOVAs indicated significant differences between adhesives (p < 0.05), denture types (p < 0.05) and biting sites (p < 0.05) with both devices. Bland-Altman plot and Mountain plots indicated a poor agreement of the two devices. It was concluded that denture adhesives increase the denture dislodgement forces, but with differences among them. The two devices do not highly agree with each other, but each one alone is useful in estimating dislodgement forces in clinical practice and research.

All You Can Eat: High Performance Capacity and Plasticity in the Common Big-Eared Bat, Micronycteris microtis (Chiroptera: Phyllostomidae)

PubMed Central

Santana, Sharlene E.; Geipel, Inga; Dumont, Elizabeth R.; Kalka, Margareta B.; Kalko, Elisabeth K. V.

2011-01-01

Ecological specialization and resource partitioning are expected to be particularly high in the species-rich communities of tropical vertebrates, yet many species have broader ecological niches than expected. In Neotropical ecosystems, Neotropical leaf-nosed bats (Phyllostomidae) are one of the most ecologically and functionally diverse vertebrate clades. Resource partitioning in phyllostomids might be achieved through differences in the ability to find and process food. We selected Micronycteris microtis, a very small (5–7 g) animalivorous phyllostomid, to explore whether broad resource use is associated with specific morphological, behavioral and performance traits within the phyllostomid radiation. We documented processing of natural prey and measured bite force in free-ranging M. microtis and other sympatric phyllostomids. We found that M. microtis had a remarkably broad diet for prey size and hardness. For the first time, we also report the consumption of vertebrates (lizards), which makes M. microtis the smallest carnivorous bat reported to date. Compared to other phyllostomids, M. microtis had the highest bite force for its size and cranial shape and high performance plasticity. Bite force and cranial shape appear to have evolved rapidly in the M. microtis lineage. High performance capacity and high efficiency in finding motionless prey might be key traits that allow M. microtis, and perhaps other species, to successfully co-exist with other gleaning bats. PMID:22164308

Effect of Ibuprofen on masking endodontic diagnosis.

PubMed

Read, Jason K; McClanahan, Scott B; Khan, Asma A; Lunos, Scott; Bowles, Walter R

2014-08-01

An accurate diagnosis is of upmost importance before initiating endodontic treatment; yet, there are occasions when the practitioner cannot reproduce the patient's chief complaint because the patient has become asymptomatic. Ibuprofen taken beforehand may "mask" or eliminate the patient's symptoms. In fact, 64%-83% of patients with dental pain take analgesics before seeing a dentist. The purpose of this study was to examine the possible "masking" effect of ibuprofen on endodontic diagnostic tests. Forty-two patients with endodontic pain underwent testing (cold, percussion, palpation, and bite force measurement) and then received either placebo or 800 mg ibuprofen. Both patients and operators were blinded to the medication received. One hour later, diagnostic testing was repeated and compared with pretreatment testing. Ibuprofen affected testing values for vital teeth by masking palpation 40%, percussion 25%, and cold 25% on affected teeth with symptomatic irreversible pulpitis and symptomatic apical periodontitis. There was no observed masking effect in the placebo group on palpation, percussion, or cold values. When nonvital teeth were included, the masking effect of ibuprofen was decreased. However, little masking occurred with the bite force measurement differences. Analgesics taken before the dental appointment can affect endodontic diagnostic testing results. Bite force measurements can assist in identifying the offending tooth in cases in which analgesics "mask" the endodontic diagnosis. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Evolution of Skull and Mandible Shape in Cats (Carnivora: Felidae)

PubMed Central

Christiansen, Per

2008-01-01

The felid family consists of two major subgroups, the sabretoothed and the feline cats, to which all extant species belong, and are the most anatomically derived of all carnivores for predation on large prey with a precision killing bite. There has been much controversy and uncertainty about why the skulls and mandibles of sabretoothed and feline cats evolved to become so anatomically divergent, but previous models have focused on single characters and no unifying hypothesis of evolutionary shape changes has been formulated. Here I show that the shape of the skull and mandible in derived sabrecats occupy entirely different positions within overall morphospace from feline cats, and that the evolution of skull and mandible shape has followed very different paths in the two subgroups. When normalised for body-size differences, evolution of bite forces differ markedly in the two groups, and are much lower in derived sabrecats, and they show a significant relationship with size and cranial shape, whereas no such relationship is present in feline cats. Evolution of skull and mandible shape in modern cats has been governed by the need for uniform powerful biting irrespective of body size, whereas in sabrecats, shape evolution was governed by selective pressures for efficient predation with hypertrophied upper canines at high gape angles, and bite forces were secondary and became progressively weaker during sabrecat evolution. The current study emphasises combinations of new techniques for morphological shape analysis and biomechanical studies to formulate evolutionary hypotheses for difficult groups. PMID:18665225

Personality and performance are affected by age and early life parameters in a small primate.

PubMed

Zablocki-Thomas, Pauline B; Herrel, Anthony; Hardy, Isabelle; Rabardel, Lucile; Perret, Martine; Aujard, Fabienne; Pouydebat, Emmanuelle

2018-05-01

A whole suite of parameters is likely to influence the behavior and performance of individuals as adults, including correlations between phenotypic traits or an individual's developmental context. Here, we ask the question whether behavior and physical performance traits are correlated and how early life parameters such as birth weight, litter size, and growth can influence these traits as measured during adulthood. We studied 486 captive gray mouse lemurs ( Microcebus murinus ) and measured two behavioral traits and two performance traits potentially involved in two functions: exploration behavior with pull strength and agitation score with bite force. We checked for the existence of behavioral consistency in behaviors and explored correlations between behavior, performance, morphology. We analyzed the effect of birth weight, growth, and litter size, while controlling for age, sex, and body weight. Behavior and performance were not correlated with one another, but were both influenced by age. Growth rate had a positive effect on adult morphology, and birth weight significantly affected emergence latency and bite force. Grip strength was not directly affected by early life traits, but bite performance and exploration behavior were impacted by birth weight. This study shows how early life parameters impact personality and performance.

In vivo measurements of maximal occlusal force and minimal pressure threshold on overdentures supported by implants or natural roots: a comparative study, Part 1.

PubMed

Mericske-Stern, R; Hofmann, J; Wedig, A; Geering, A H

1993-01-01

Numerous investigations give evidence of improvement of masticatory performance when edentulous patients have had implants placed. A comparative study was carried out to investigate the oral function and tactile sensibility of patients restored with implant-supported overdentures. Twenty-six patients with ITI implants and 18 patients with natural-tooth roots were selected. The minimal pressure threshold perceived in vertical and horizontal directions was registered with dynamometers. Maximal occlusal force was recorded with a miniature bite recorder placed between each pair of antagonistic teeth on both jaw sides separately. All measurements were repeated three times and the average was calculated. The records of minimal perceived pressure revealed a significantly higher threshold (factor 100) for the implant group. In both test groups, values registered in the vertical direction were slightly increased. A tendency for test subjects with implants to reach higher maximal occlusal force was observed, but not at a statistically significant level. In both test groups, the average maximum was found on the second premolar. The minimal pressure threshold seems to depend on the presence of receptors in the periodontal ligament. The records of maximal occlusal force, which were similar in both test groups, lead to the assumption that the limitation in maximal occlusal capacity of overdenture wearers is multifactorial and does not depend on the presence of a periodontal ligament.

Parrotfish grazing ability: interspecific differences in relation to jaw-lever mechanics and relative weight of adductor mandibulae on an Okinawan coral reef

PubMed Central

2016-01-01

Parrotfishes (family Labridae: Scarini) are regarded to have important roles for maintaining the ecosystem balance in coral reefs due to their removal of organic matter and calcic substrates by grazing. The purpose of the present study was to clarify the interspecific differences in grazing ability of five parrotfish species (Chlorurus sordidus, C. bowersi, Scarus rivulatus, S. niger and S. forsteni) in relation to interspecific differences in jaw-lever mechanics and the relative weight of the adductor mandibulae (muscles operating jaw closing). The grazing ability was calculated by using stomach contents (CaCO3 weight/organic matter weight) defined as the grazing ability index (GAI). There were significant interspecific differences in GAI (C. sordidus = C. bowersi > S. rivulatus > S. niger = S. forsteni). Teeth of C. sordidus and C. bowersi were protrusive-shape whereas teeth of S. rivulatus, S. niger and S. forsteni were flat-shape. C. sordidus and C. bowersihave jaw-lever mechanics producing a greater biting force and have a larger weight of adductor mandibulae. S. rivulatus has jaw-lever mechanics producing a greater biting force but a smaller weight of adductor mandibulae that produce an intermediate biting force. In contrast, S. niger and S. forsteni have jaw-lever mechanics producing a lesser biting force and have a smaller weight of adductor mandibulae. Feeding rates and foray size of S. rivulatus, S. niger and S. forsteni were greater than C. sordidus and C. bowersi. The degree in bioerosion (GAI × feeding rate) was the largest for S. rivulatusand the smallest for S. forsteni. The degree in bioerosion for C. sordidus was larger than S. niger whereas relatively equal between C. bowersi and S. niger. These results suggest that interspecific difference in GAI was explained by interspecific differences in teeth shape, jaw-lever mechanics and relative weight of adductor mandibulae. The interspecific difference in the degree of bioerosion suggests the importance of various size of parrotfishes with diverse feeding modes to maintain healthy coral reef ecosystems. PMID:27635364

Parrotfish grazing ability: interspecific differences in relation to jaw-lever mechanics and relative weight of adductor mandibulae on an Okinawan coral reef.

PubMed

Nanami, Atsushi

2016-01-01

Parrotfishes (family Labridae: Scarini) are regarded to have important roles for maintaining the ecosystem balance in coral reefs due to their removal of organic matter and calcic substrates by grazing. The purpose of the present study was to clarify the interspecific differences in grazing ability of five parrotfish species (Chlorurus sordidus, C. bowersi, Scarus rivulatus, S. niger and S. forsteni) in relation to interspecific differences in jaw-lever mechanics and the relative weight of the adductor mandibulae (muscles operating jaw closing). The grazing ability was calculated by using stomach contents (CaCO3 weight/organic matter weight) defined as the grazing ability index (GAI). There were significant interspecific differences in GAI (C. sordidus = C. bowersi > S. rivulatus > S. niger = S. forsteni). Teeth of C. sordidus and C. bowersi were protrusive-shape whereas teeth of S. rivulatus, S. niger and S. forsteni were flat-shape. C. sordidus and C. bowersihave jaw-lever mechanics producing a greater biting force and have a larger weight of adductor mandibulae. S. rivulatus has jaw-lever mechanics producing a greater biting force but a smaller weight of adductor mandibulae that produce an intermediate biting force. In contrast, S. niger and S. forsteni have jaw-lever mechanics producing a lesser biting force and have a smaller weight of adductor mandibulae. Feeding rates and foray size of S. rivulatus, S. niger and S. forsteni were greater than C. sordidus and C. bowersi. The degree in bioerosion (GAI × feeding rate) was the largest for S. rivulatusand the smallest for S. forsteni. The degree in bioerosion for C. sordidus was larger than S. niger whereas relatively equal between C. bowersi and S. niger. These results suggest that interspecific difference in GAI was explained by interspecific differences in teeth shape, jaw-lever mechanics and relative weight of adductor mandibulae. The interspecific difference in the degree of bioerosion suggests the importance of various size of parrotfishes with diverse feeding modes to maintain healthy coral reef ecosystems.

Fracture resistance of 3 types of primary esthetic stainless steel crowns.

PubMed

Beattie, Sean; Taskonak, Burak; Jones, James; Chin, Judith; Sanders, Brian; Tomlin, Angela; Weddell, James

2011-01-01

Demand is increasing for esthetic restorations in pediatric dentistry. When full coverage is indicated, one option is to use esthetic stainless steel crowns (SSCs). However, this type of crown is prone to fracture. The purpose of this study was to evaluate the fracture resistance of 3 types of esthetic SSCs. Esthetic SSCs for first primary mandibular molars were cemented to idealized epoxy dies with glass ionomer cement. The die-crown units were fractured on a universal testing machine. The force was delivered by a stainless steel ball fixture, set in a uniaxial lever to replicate a cusp contact, with a crosshead speed of 1 mm/min. The differences among the 3 types of crown, in terms of force required to fracture, were compared statistically by 1-way analysis of variance. Pairwise comparisons were performed with Fisher's protected least significant difference test, at an overall significance level of 5%. The force required to fracture, expressed as average ± standard error, did not differ significantly among the 3 brands of esthetic SSCs: 1730 N ± 50 N, 1826 N ± 62 N and 1671 N ± 68 N, respectively (p = 0.19), well below the maximum bite force of pediatric patients determined in a previous study. Esthetic SSCs should be able to resist occlusal forces over short clinical periods. However, long-term occlusal loading and fatigue failures should be taken into account when evaluating the success of this type of crown.

The jaw is a second-class lever in Pedetes capensis (Rodentia: Pedetidae)

PubMed Central

2017-01-01

The mammalian jaw is often modelled as a third-class lever for the purposes of biomechanical analyses, owing to the position of the resultant muscle force between the jaw joint and the teeth. However, it has been proposed that in some rodents the jaws operate as a second-class lever during distal molar bites, owing to the rostral position of the masticatory musculature. In particular, the infraorbital portion of the zygomatico-mandibularis (IOZM) has been suggested to be of major importance in converting the masticatory system from a third-class to a second-class lever. The presence of the IOZM is diagnostic of the hystricomorph rodents, and is particularly well-developed in Pedetes capensis, the South African springhare. In this study, finite element analysis (FEA) was used to assess the lever mechanics of the springhare masticatory system, and to determine the function of the IOZM. An FE model of the skull of P. capensis was constructed and loaded with all masticatory muscles, and then solved for biting at each tooth in turn. Further load cases were created in which each masticatory muscle was removed in turn. The analyses showed that the mechanical advantage of the springhare jaws was above one at all molar bites and very close to one during the premolar bite. Removing the IOZM or masseter caused a drop in mechanical advantage at all bites, but affected strain patterns and cranial deformation very little. Removing the ZM had only a small effect on mechanical advantage, but produced a substantial reduction in strain and deformation across the skull. It was concluded that the masticatory system of P. capensis acts as a second class lever during bites along almost the entire cheek tooth row. The IOZM is clearly a major contributor to this effect, but the masseter also has a part to play. The benefit of the IOZM is that it adds force without substantially contributing to strain or deformation of the skull. This may help explain why the hystricomorphous morphology has evolved multiple times independently within Rodentia. PMID:28875081

Soil Vapor Extraction Treatability Investigation Site S Within Operable Unit D, McClellan Air Force Base. Phases 2 and 3

DTIC Science & Technology

1992-09-01

weeks after tick bite. RMSF: Rash comprising CVoR275/00o.51 8-10 red spots under skin , 3 to 10 days after tick bite. For both: chills, fever , headache...sanitizer, brush, garbage bags, hand soap, and paper towels . The decon- tamination process will include: * Removal of all loose dirt * Scrub with...Resource Conservation and Recovery Act CvOR20/II53.51 RI/FS Remedial Investigation/Feasibility Study RMSF Rocky Mountain spotted fever SARA Superfund

Biomechanics and load resistance of small-diameter and mini dental implants: a review of literature.

PubMed

Hasan, Istabrak; Bourauel, Christoph; Mundt, Torsten; Stark, Helmut; Heinemann, Friedhelm

2014-02-01

In recent years, the application of small-diameter and mini dental implants to support removable and fixed prosthesis has dramatically increased. However, the success of these implants under functional biting forces and the reaction of the bone around them need to be analyzed. This review was aimed to present studies that deal with the fatigue life of small-diameter and mini dental implants under normal biting force, and their survival rate. The numerical and experimental studies concluded that an increase in the risk of bone damage or implant failure may be assumed in critical clinical situations and implants with <3 mm diameter have a risk of fracture in clinical practice. The survival rate of the small-diameter and mini dental implants over 5 years was 98.3-99.4%.

Human onchocerciasis in the Amazonian area of southern Venezuela: spatial and temporal variations in biting and parity rates of black fly (Diptera: Simuliidae) vectors.

PubMed

Grillet, M E; Basáñez, M G; Vivas-Martínez, S; Villamizar, N; Frontado, H; Cortez, J; Coronel, P; Botto, C

2001-07-01

We investigated some entomological factors underlying altitudinal prevalence variation in the Venezuelan Amazonia human onchocerciasis focus. Spatial and temporal variation in relative abundance, daily biting rate, proportion of parous flies, and monthly parous biting rate were studied for the three main simuliid vectors (based on their vectorial competence: Simulium oyapockense s.l. Floch & Abonnenc approximately = S. incrustatum Lutz < S. guianense s.l. Wise). Yanomami villages were selected among sentinel communities of the ivermectin control program, representing hypo- to hyperendemicity conditions of infection. Spatial variation was explored via increasing village altitude on two river systems (A: Ocamo-Putaco and B: Orinoco-Orinoquito). Temporal variation was studied between 1995 and 1999 by sampling the biting population during dry and rainy mouths. Environmental variables included monthly rainfall and maximum river height. Simuliid species composition itself varied along the altitudinal and prevalence gradient. S. oyapockense s.l. prevailed below 150 m. Above this altitude and up to 240 m, S. incrustatum and S. guianense s.l. became more frequently and evenly collected along A but not along B, where S. incrustatum remained absent. The daily biting rate of S. oyapockense s.l. was higher during the dry season along A, whereas the converse took place along B. Daily biting rate of S. incrustatum was lowest during early rains. By contrast, the daily biting rate of S. guianense s.l. was highest during this period. There was a significant negative cross-correlation between proportion of parous of S. oyapockense s.l. and river height (2 and 3 mo lagged), whereas this variable (1 and 2 mo lagged) was positively correlated with the proportion of parous flies for S. incrustatum. Monthly parous biting rate values suggest that the months contributing most to onchocerciasis transmission in the area are likely to be the dry season and the transition periods between seasons.

Retrospective analysis of snake victims in Northern India admitted in a tertiary level institute

PubMed Central

Ahmed, Syed Moied; Nadeem, Abu; Islam, Mohd. Sabihul; Agarwal, Shiwani; Singh, Lalit

2012-01-01

Context: Snake bites are the common cause of morbidity and mortality in tropical countries. Aims: To analyze the outcome of snake bite victims Settings and Design: Retrospective analysis of data from Intensive care unit, Department of Anesthesiology. Materials and Methods: All the patients admitted in the intensive care unit for snake bite management during the year May 2004 - April 2009 were retrospectively reviewed. The data included age, sex, month and time of incident, site of bite, dose of anti--snake venom, time of anti--snake venom, administration, duration of mechanical ventilation, complications and death of a victim. Statistical analysis used: Pearson's correlation test, paired samples t-test. Results and Conclusions: 113 patients reported to the Accident and Emergency with history of snake bite. 26 patients were referred to other hospital, 17 patients were brought dead, and 70 patients were admitted to the intensive care unit. In 59 snake-bite victims, maximum data could be recovered. Krait was the most common type of snake bite reported. There was a male preponderance (69.4%) with age ranging between 20 and 40 years (52.5%). The mean lag time (time elapsed between bite and first dose of anti--snake venom) was 5.3 ± 1.4 h and the mean anti-snake venom dose was 12.3 ± 2.4 vials. There was a positive and significant correlation between lag time and total dose of anti--snake venom (correlation coefficient =0.956, P<0.0001). Overall 72.9% patients required mechanical ventilation with a mean duration of 56.2 ± 16.1 h. 10.2% patients sustained cardiac arrest, 8.7% patients developed ventilator associated pneumonia, 6.7% suffered mild anti-snake venom reaction, 6.7% had hypotension and 5.1% patients developed renal failure. The overall mortality was 5.1%. PMID:22345945

Chewing as a forming application: A viscoplastic damage law in modelling food oral breakdown

NASA Astrophysics Data System (ADS)

Skamniotis, C. G.; Charalambides, M. N.; Elliott, M.

2017-10-01

The first bite mechanical response of a food item resembles compressive forming processes, where a tool is pressed into a workpiece. The present study addresses ongoing interests in the deformations and damage of food products, particularly during the first bite, in relation to their mechanical properties. Uniaxial tension, compression and shear tests on a starch based food reveal stress-strain response and fracture strains strongly dependent on strain rate and stress triaxiality, while damage mechanisms are identified in the form of stress softening. A pressure dependent viscoplastic constitutive law reproduces the behavior with the aid of ABAQUS subroutines, while a ductile damage initiation and evolution framework based on fracture toughness data enables accurate predictions of the product breakdown. The material model is implemented in a Finite Element (FE) chewing model based on digital pet teeth geometry where the first bite of molar teeth against a food item is simulated. The FE force displacement results match the experimental data obtained by a physical replicate of the bite model, lending weight to the approach as a powerful tool in understanding of food breakdown and product development.

[Mandible function in taking construction bite for activator].

PubMed

Irie, M

1989-06-01

Functional effects of construction bite for activator (Andresen type) especially on lateral pterygoid muscle, as well as the positional changes of the mandible, hyoid bone and surface EMGs from bilateral anterior temporal (TA) and masseter (MM) muscle, were studied on the electric force scale, MKG, EMG and cephalometric radiographs in 14 subjects with anterior cross bite in mixed dentition. The cephalometric radiographs were taken at the start of each patient's treatment. One was taken with the mandible in the intercuspal position and one was also taken with the activator in the mouth at the overjet improvement. The activator patients were divided into two groups because of differences in the direction of movement of the hyoid bone in the FH plane. In group O (7 patients), the movement of the hyoid bone was at an oblique angle to the FH plane, while in group D (7 patients) the movement ot the hyoid bone with nearly direct below angle to FH plane. The patients were further divided into three types because of differences in the distance between the hyoid bone and mental spine, and combined with the groups OA (3 patients), OB (2 patients), OC (2 patients), DA (5 patients), DB (2 patients) and DC (Naught). The results obtained were as follows: The forces for the construction bite for groups O and D were 2.71 Kg and 2.72 kg, respectively. Type OC required significantly heavier force. (p less than 0.05) In the condylar test, O group was significantly smaller at the start of treatment, but not after overjet improvement. Type OA and OB were also significantly smaller at the start of treatment. (p less than 0.05) Velocity of opening for group D was significantly (p less than 0.05) faster at the start of treatment, but not after that. There was no significant difference in EMGs between the groups, with activator in the mouse D group much increased as it EMGs. The EMGs M/T ratio for both groups was approximately 100% at the start of treatment for overjet improvement. In cases with no or slight lateral shift in the recorded path of closure or in the incisal region, no large differences were recorded laterally. Large EMGs differences were recorded with lateral shift in the incisal region, especially when taking the construction bite.

A systematic review of risk of HIV transmission through biting or spitting: implications for policy.

PubMed

Cresswell, F V; Ellis, J; Hartley, J; Sabin, C A; Orkin, C; Churchill, D R

2018-04-23

The perceived threat of HIV transmission through spitting and biting is evidenced by the increasing use of "spit hoods" by Police Forces in the UK. In addition, a draft parliamentary bill has called for increased penalties for assaults on emergency workers, citing the risk of communicable disease transmission as one justification. We aimed to review literature relating to the risk of HIV transmission through biting or spitting. A systematic literature search was conducted using Medline, Embase and Northern Lights databases and conference websites using search terms relating to HIV, AIDS, bite, spit and saliva. Inclusion and exclusion criteria were applied to identified citations. We classified plausibility of HIV transmission as low, medium, high or confirmed based on pre-specified criteria. A total of 742 abstracts were reviewed, yielding 32 articles for full-text review and 13 case reports/series after inclusion and exclusion criteria had been applied. There were no reported cases of HIV transmission related to spitting and nine cases identified following a bite, in which the majority occurred between family (six of nine), in fights involving serious wounds (three of nine), or to untrained first-aiders placing fingers in the mouth of someone having a seizure (two of nine). Only four cases were classified as highly plausible or confirmed transmission. None related to emergency workers and none were in the UK. There is no risk of transmitting HIV through spitting, and the risk through biting is negligible. Post-exposure prophylaxis is not indicated after a bite in all but exceptional circumstances. Policies to protect emergency workers should be developed with this evidence in mind. © 2018 The Authors. HIV Medicine published by John Wiley & Sons Ltd on behalf of British HIV Association.

Role of multiple cusps in tooth fracture.

PubMed

Barani, Amir; Bush, Mark B; Lawn, Brian R

2014-07-01

The role of multiple cusps in the biomechanics of human molar tooth fracture is analysed. A model with four cusps at the bite surface replaces the single dome structure used in previous simulations. Extended finite element modelling, with provision to embed longitudinal cracks into the enamel walls, enables full analysis of crack propagation from initial extension to final failure. The cracks propagate longitudinally around the enamel side walls from starter cracks placed either at the top surface (radial cracks) or from the tooth base (margin cracks). A feature of the crack evolution is its stability, meaning that extension occurs steadily with increasing applied force. Predictions from the model are validated by comparison with experimental data from earlier publications, in which crack development was followed in situ during occlusal loading of extracted human molars. The results show substantial increase in critical forces to produce longitudinal fractures with number of cuspal contacts, indicating a capacity for an individual tooth to spread the load during mastication. It is argued that explicit critical force equations derived in previous studies remain valid, at the least as a means for comparing the capacity for teeth of different dimensions to sustain high bite forces. Copyright © 2014 Elsevier Ltd. All rights reserved.

Alveolar bone stress around implants with different abutment angulation: an FE-analysis of anterior maxilla.

PubMed

Sadrimanesh, Roozbeh; Siadat, Hakimeh; Sadr-Eshkevari, Pooyan; Monzavi, Abbas; Maurer, Peter; Rashad, Ashkan

2012-06-01

To comparatively assess the masticatory stress distribution in bone around implants placed in the anterior maxilla with three different labial inclinations. Three-dimensional finite element models were fabricated for three situations in anterior maxilla: (1) a fixture in contact with buccal cortical plate restored by straight abutment, (2) a fixture inclined at 15 degrees, and (3) 20 degrees labially restored with corresponding angled abutment. A palatal bite force of 146 N was applied to a point 3 mm below the incisal edge. Stress distribution around the bone-fixture interface was determined using ANSYS software. The maximum compressive stress, concentrated in the labial crestal cortical bone, was measured to be 62, 108, and 122 MPa for 0-, 15-, and 20-degree labially inclined fixtures, respectively. The maximum tensile stress, concentrated in the palatal crestal cortical bone, was measured to be 60, 108, and 120 MPa for 0-, 15-, and 20-degree labially inclined fixtures, respectively. While all compressive stress values were under the cortical yield strength of 169 MPa, tensile stress values partially surpassed the yield strength (104 MPa) especially when a 20-degree inclination was followed for fixture placement.

Electromyographic and cephalometric correlation with the predominant masticatory movement.

PubMed

Coelho-Ferraz, Maria Julia P; Berzin, Fausto; Amorim, Cesar Ferreira; Romano, Fabio Lourenco; de Paula Queluz, Dagmar

2010-01-01

This study aimed to evaluate the chewing muscular dynamics and correlate the side of the masticatory movement that is more vertical and/or more horizontal established by the photomeasurement Masticatory Functional Angle (MFA) to the muscular activity behavior, showed in the surface electromyography and in the radiographic images. Seventeen people were selected of both genders, with the average age of 25 years, without signs or apparent symptoms of masticatory muscular disorders. The teleradiographies were done in lateral norm and surface electromyography of the masseter muscles, anterior portion of temporal and supra-hyoids in rest position and maximal bite. The bite force measured with a metallic transducer that was connected to a force sensor (Strain Gauge) to measure the deformation of the material model SF4 (EMG SYSTEM DO BRASIL). A mandibular goniometer of the EMG System of Brazil was used to measure the opening size. The comparison and correlation were established between the groups with MFA>5 degrees and MFA<5 degrees by the test "t" of Student or test of Mann-Whitney conform the distribution was normal or not, respectively. The results showed significant differences between groups, although without sexual dimorphism, to masseter muscle in maximal bite. In conclusion, the anatomic-physiological aspects of temporomandibular disorders are related to the asymmetrical mandible function.

Functional anatomy and feeding biomechanics of a giant Upper Jurassic pliosaur (Reptilia: Sauropterygia) from Weymouth Bay, Dorset, UK.

PubMed

Foffa, Davide; Cuff, Andrew R; Sassoon, Judyth; Rayfield, Emily J; Mavrogordato, Mark N; Benton, Michael J

2014-08-01

Pliosaurs were among the largest predators in Mesozoic seas, and yet their functional anatomy and feeding biomechanics are poorly understood. A new, well-preserved pliosaur from the Kimmeridgian of Weymouth Bay (UK) revealed cranial adaptations related to feeding. Digital modelling of computed tomography scans allowed reconstruction of missing, distorted regions of the skull and of the adductor musculature, which indicated high bite forces. Size-corrected beam theory modelling showed that the snout was poorly optimised against bending and torsional stresses compared with other aquatic and terrestrial predators, suggesting that pliosaurs did not twist or shake their prey during feeding and that seizing was better performed with post-symphyseal bites. Finite element analysis identified biting-induced stress patterns in both the rostrum and lower jaws, highlighting weak areas in the rostral maxillary-premaxillary contact and the caudal mandibular symphysis. A comparatively weak skull coupled with musculature that was able to produce high forces, is explained as a trade-off between agility, hydrodynamics and strength. In the Kimmeridgian ecosystem, we conclude that Late Jurassic pliosaurs were generalist predators at the top of the food chain, able to prey on reptiles and fishes up to half their own length. © 2014 Anatomical Society.

Functional anatomy and feeding biomechanics of a giant Upper Jurassic pliosaur (Reptilia: Sauropterygia) from Weymouth Bay, Dorset, UK

PubMed Central

Foffa, Davide; Cuff, Andrew R; Sassoon, Judyth; Rayfield, Emily J; Mavrogordato, Mark N; Benton, Michael J

2014-01-01

Pliosaurs were among the largest predators in Mesozoic seas, and yet their functional anatomy and feeding biomechanics are poorly understood. A new, well-preserved pliosaur from the Kimmeridgian of Weymouth Bay (UK) revealed cranial adaptations related to feeding. Digital modelling of computed tomography scans allowed reconstruction of missing, distorted regions of the skull and of the adductor musculature, which indicated high bite forces. Size-corrected beam theory modelling showed that the snout was poorly optimised against bending and torsional stresses compared with other aquatic and terrestrial predators, suggesting that pliosaurs did not twist or shake their prey during feeding and that seizing was better performed with post-symphyseal bites. Finite element analysis identified biting-induced stress patterns in both the rostrum and lower jaws, highlighting weak areas in the rostral maxillary-premaxillary contact and the caudal mandibular symphysis. A comparatively weak skull coupled with musculature that was able to produce high forces, is explained as a trade-off between agility, hydrodynamics and strength. In the Kimmeridgian ecosystem, we conclude that Late Jurassic pliosaurs were generalist predators at the top of the food chain, able to prey on reptiles and fishes up to half their own length. PMID:24925465

Evaluation of muscle activity, bite force and salivary cortisol in children with bruxism before and after low level laser applied to acupoints: study protocol for a randomised controlled trial.

PubMed

Salgueiro, Mônica da Consolação Canuto; Bortoletto, Carolina Carvalho; Horliana, Anna Carolina RattoTempestini; Mota, Ana Carolina Costa; Motta, Lara Jansiski; Motta, Pamella de Barros; MesquitaFerrari, Raquel Agnelli; Fernandes, Kristianne Porta Santos; Bussadori, Sandra Kalil

2017-08-08

Bruxism is a repetitive activity that causes tooth wear, audible sounds, and discomfort. Preventive measures have been studied for conditions that can exert a negative influence on physiological development in children. Low-level laser therapy administered over acupoints is an effective, painless, low-cost treatment option that has achieved good results. Thus, the aim of the proposed study is to evaluate changes in muscle activity, bite force and salivary cortisol in children with bruxism after the application of low-level laser to accupoints. The children will be randomly allocated to four groups of 19 individuals: G1 - low-level laser; G2 - occlusal splint; G3 - placebo laser; and G4 - control (without bruxism). The BTS TMJOINT electromyography will be used to determine muscle activity and a digital gnathodynamometer will be used to measure bite force. Salivary cortisol will be analysed at baseline as well as one and six months after treatment. Two-way ANOVA will be employed and complemented by Tukey's test. Bruxism is a repetitive activity of the masticatory muscles that can have negative consequences if not treated, such as tooth wear, noises, discomfort and anxiety. Thus, control and treatment measures should be taken. Although low-level laser therapy over acupoints has been indicated for children, the effects of this treatment modality have not yet been studied. NCT02757261 on 8 April 2016. This study protocol received a grant from the Brazilian fostering agency São Paulo Research Foundation (FAPESP: #2015/24731-0).

Testing functional and morphological interpretations of enamel thickness along the deciduous tooth row in human children.

PubMed

Mahoney, Patrick

2013-08-01

The significance of a gradient in enamel thickness along the human permanent molar row has been debated in the literature. Some attribute increased enamel thickness from first to third molars to greater bite force during chewing. Others argue that thicker third molar enamel relates to a smaller crown size facilitated by a reduced dentin component. Thus, differences in morphology, not function, explains enamel thickness. This study draws on these different interpretive models to assess enamel thickness along the entire human deciduous tooth row. Average enamel thickness (AET), the area and proportion of crown enamel and dentin, and a crown size proxy are calculated for incisors, canines, and molars. Allometric scaling relationships are assessed within each tooth class, and then comparisons are undertaken along the row. Generally, AET was correlated with crown size and scaled with isometry, except for second molars which scaled with positive allometry. Mean AET increased along the row and was greater on molars, where bite forces are reported to be higher. Second molars combined the largest crown size with the thickest enamel and the smallest proportion of dentin, which is consistent with a reduction in the potential for cusp fracture under high bite forces. Resistance to wear may also account for some enamel thickness variation between tooth classes. Dental reduction did not explain the trend in AET from central to lateral incisors, or from first to second molars. The gradient in AET along the deciduous tooth row is partly consistent with a functional interpretation of enamel thickness. Copyright © 2013 Wiley Periodicals, Inc.

Management of severe anterior open-bite in an adult patient using miniscrews as skeletal anchorage.

PubMed

Rachala, Madhukar Reddy; Harikrishnan, Pandurangan

2010-01-01

Anterior open bite is often caused by a downward rotation of the mandible and/or by excessive eruption of the posterior teeth. In such cases, it is difficult to establish absolute anchorage for molar intrusion by traditional orthodontic mechanics. This is a case report of successful treatment of a severe anterior open bite using miniscrew anchorage. A female patient of 20 yrs presented with symmetrical frontal facial appearance, increased anterior facial height, convex profile and incompetent lips. Dentally, she had lost both mandibular first molars due to caries and both maxillary first molars were extruded. She had class II canine relationship, 5 mm overjet, 5 mm anterior open bite, 3 mm mandibular midline diastema and a spacing of 2 mm in the maxillary arch. The treatment objectives were to correct the anterior open bite and establish ideal overjet and overbite and to restore the mandibular first molars with fixed prosthesis. Titanium miniscrews (1.3 mm diameter and 9 mm length) were implanted bilaterally in the maxillary arch between the second premolar and the first molar, and an intrusion force was applied with NiTi closed coil springs for 8 months. After molar intrusion, the same screws were used for en masse retraction of the entire dentition (third molars were extracted) for 4 months. The results showed that, after an active treatment of 20 months, the maxillary molars were intruded about 4 mm each and good occlusion was achieved. In conclusion, the miniscrews were very useful in the non-surgical management of adult anterior open bite cases.

Treatment and retention of relapsed anterior open-bite with low tongue posture and tongue-tie: A 10-year follow-up

PubMed Central

Seo, Yu-Jin; Kim, Su-Jung; Munkhshur, Janchivdorj; Chung, Kyu-Rhim; Ngan, Peter

2014-01-01

The purpose of the current report is to present 6-year long-term stability and 10-year follow-up data for an adult patient who was treated with a tongue elevator for relapsed anterior open-bite. The 19-year-old male patient presented with the chief complaint of difficulty in chewing his food. Collectively, clinical and radiographic examinations revealed an anterior open-bite, low tongue posture, and tongue-tie. The patient opted for orthodontic treatment alone, without any surgical procedure. A lingual frenectomy was recommended to avoid the risk of relapse, but the patient declined because he was not experiencing tongue discomfort. Initial treatment of the anterior open-bite with molar intrusion and tongue exercises was successful, but relapse occurred during the retention period. A tongue elevator was used for retreatment, because the approach was minimally invasive and suited the patient's requirements regarding discomfort, cost, and time. The appliance changed the tongue posture and generated an altered tongue force, which ultimately resulted in intrusive dentoalveolar effects, and a subsequent counterclockwise rotation of the mandible. The results showed long-term stability and were maintained for six years through continual use of the tongue elevator. The results of this case indicated that a tongue elevator could be used not only as an alternative treatment for open-bite, but also as an active retainer. PMID:25133135

Function-dependent shape characteristics of the human skull.

PubMed

Witzel, U; Preuschoft, H

2002-06-01

Using the FEM-program ANSYS 5.4, we have shaped a model of the human skull in which the flow of forces and the relative location and magnitudes of stresses are investigated. Forces are applied from below through the tooth row of the upper jaw. An ample volume is provided for the transmission of these bite forces upward to the roof of the braincase, where bearings counteract the forces from below. Within this volume, no other morphological features are considered than two cone-shaped orbits and a nasal channel which has a rounded, triangular cross section, extending upward between the orbits. Under loads (= bite forces) acting simultaneously in the directions and relative sizes of realistic bite- and chewing forces, there occurred stress concentrations inside the model which resemble closely the morphological characteristics of the human skull. The most remarkable pathways of stresses correspond to Toldt's and Benninghoff's nasal, zygomatic and pterygoid pillars. Aside from these stress concentrations, stress-free regions become visible at places, where the skull shows excavations: the vaulted palate with canalis incisivus, the canine fossa, superior and inferior orbital fissure, or cavities like the maxillary sinuses and cavum cranii. Behind the posterior molars and the pterygoid, the stresses disappear abruptly, and in the side wall of the nasal cavity a maxillary hiatus remains without stresses. A flow of forces comparable to, but not at the exact position of the zygomatic arch extends from the highly stressed zygomatic bone rearward and upward. In a later step of simulation, somewhat deeper, at the place of the really existing zygomatic arch, a series of small forces was applied, which correspond to the resultant force that is created by the redirection of the pull of the m. masseter into the temporal fascia. This--biologically reasonable--manipulation of the model leads to a reduction of the forces in the zygomatic bone, and to a downward shift of the zygomatic arch and its isolation from the skull's side wall by a deep, stress-free temporal fossa. The similarity between the stress flow in the model and the shape of the skull seems to indicate that the skull, like the bones of the postcranial skeleton, develops its shape in dependence from the mechanic stressing through the process of causal histogenesis. In view of experimental results, the possibility cannot be ruled out, that the safety factors in the skull deviate from those in the postcranial skeleton.

Predicting key malaria transmission factors, biting and entomological inoculation rates, using modelled soil moisture in Kenya.

PubMed

Patz, J A; Strzepek, K; Lele, S; Hedden, M; Greene, S; Noden, B; Hay, S I; Kalkstein, L; Beier, J C

1998-10-01

While malaria transmission varies seasonally, large inter-annual heterogeneity of malaria incidence occurs. Variability in entomological parameters, biting rates and entomological inoculation rates (EIR) have been strongly associated with attack rates in children. The goal of this study was to assess the weather's impact on weekly biting and EIR in the endemic area of Kisian, Kenya. Entomological data collected by the U.S. Army from March 1986 through June 1988 at Kisian, Kenya was analysed with concurrent weather data from nearby Kisumu airport. A soil moisture model of surface-water availability was used to combine multiple weather parameters with landcover and soil features to improve disease prediction. Modelling soil moisture substantially improved prediction of biting rates compared to rainfall; soil moisture lagged two weeks explained up to 45% of An. gambiae biting variability, compared to 8% for raw precipitation. For An. funestus, soil moisture explained 32% variability, peaking after a 4-week lag. The interspecies difference in response to soil moisture was significant (P < 0.00001). A satellite normalized differential vegetation index (NDVI) of the study site yielded a similar correlation (r = 0.42 An. gambiae). Modelled soil moisture accounted for up to 56% variability of An. gambiae EIR, peaking at a lag of six weeks. The relationship between temperature and An. gambiae biting rates was less robust; maximum temperature r2 = -0.20, and minimum temperature r2 = 0.12 after lagging one week. Benefits of hydrological modelling are compared to raw weather parameters and to satellite NDVI. These findings can improve both current malaria risk assessments and those based on El Niño forecasts or global climate change model projections.

Theoretical impact of insecticide-impregnated school uniforms on dengue incidence in Thai children.

PubMed

Massad, Eduardo; Amaku, Marcos; Coutinho, Francisco Antonio Bezerra; Kittayapong, Pattamaporn; Wilder-Smith, Annelies

2013-03-28

Children carry the main burden of morbidity and mortality caused by dengue. Children spend a considerable amount of their day at school; hence strategies that reduce human-mosquito contact to protect against the day-biting habits of Aedes mosquitoes at schools, such as insecticide-impregnated uniforms, could be an effective prevention strategy. We used mathematical models to calculate the risk of dengue infection based on force of infection taking into account the estimated proportion of mosquito bites that occur in school and the proportion of school time that children wear the impregnated uniforms. The use of insecticide-impregnated uniforms has efficacy varying from around 6% in the most pessimistic estimations, to 55% in the most optimistic scenarios simulated. Reducing contact between mosquito bites and human hosts via insecticide-treated uniforms during school time is theoretically effective in reducing dengue incidence and may be a valuable additional tool for dengue control in school-aged children. The efficacy of this strategy, however, is dependent on the compliance of the target population in terms of proper and consistent wearing of uniforms and, perhaps more importantly, the proportion of bites inflicted by the Aedes population during school time.

Theoretical impact of insecticide-impregnated school uniforms on dengue incidence in Thai children

PubMed Central

Massad, Eduardo; Amaku, Marcos; Coutinho, Francisco Antonio Bezerra; Kittayapong, Pattamaporn; Wilder-Smith, Annelies

2013-01-01

Background Children carry the main burden of morbidity and mortality caused by dengue. Children spend a considerable amount of their day at school; hence strategies that reduce human–mosquito contact to protect against the day-biting habits of Aedes mosquitoes at schools, such as insecticide-impregnated uniforms, could be an effective prevention strategy. Methodology We used mathematical models to calculate the risk of dengue infection based on force of infection taking into account the estimated proportion of mosquito bites that occur in school and the proportion of school time that children wear the impregnated uniforms. Principal findings The use of insecticide-impregnated uniforms has efficacy varying from around 6% in the most pessimistic estimations, to 55% in the most optimistic scenarios simulated. Conclusions Reducing contact between mosquito bites and human hosts via insecticide-treated uniforms during school time is theoretically effective in reducing dengue incidence and may be a valuable additional tool for dengue control in school-aged children. The efficacy of this strategy, however, is dependent on the compliance of the target population in terms of proper and consistent wearing of uniforms and, perhaps more importantly, the proportion of bites inflicted by the Aedes population during school time. PMID:23541045

Exploring the utility of DNA barcoding in species delimitation of Polypedilum (Tripodura) non-biting midges (Diptera: Chironomidae).

PubMed

Song, Chao; Wang, Qian; Zhang, Ruilei; Sun, Bingjiao; Wang, Xinhua

2016-02-16

In this study, we tested the utility of the mitochondrial gene cytochrome c oxidase subunit 1 (CO1) as the barcode region to deal with taxonomical problems of Polypedilum (Tripodura) non-biting midges (Diptera: Chironomidae). The 114 DNA barcodes representing 27 morphospecies are divided into 33 well separated clusters based on both Neighbor Joining and Maximum Likelihood methods. DNA barcodes revealed an 82% success rate in matching with morphospecies. The selected DNA barcode data support 37-64 operational taxonomic units (OTUs) based on the methods of Automatic Barcode Gap Discovery (ABGD) and Poisson Tree Process (PTP). Furthermore, a priori species based on consistent phenotypic variations were attested by molecular analysis, and a taxonomical misidentification of barcode sequences from GenBank was found. We could not observe a distinct barcode gap but an overlap ranged from 9-12%. Our results supported DNA barcoding as an ideal method to detect cryptic species, delimit sibling species, and associate different life stages in non-biting midges.

[Investigation into the actual condition of patients with occlusal disharmony at the Pedodontic Clinic of Kyushu University. Cases of anterior cross-bite in the deciduous dentition].

PubMed

Yamasaki, K; Hirota, K; Yamasaki, Y; Nonaka, K; Nakata, M

1989-01-01

The total number of subjects was 2754 children (1354 boys and 1402 girls), who visited the Pedodontic Clinic of Kyushu University during the 5 year period from April 1st 1981 to March 31st 1986. We investigated the actual conditions of patients who complained of occlusal disharmony and who were ascertained to be associated with occlusal disharmony. The results were as follows: 1. The percentage ratio of patients with chief complaints concerning occlusions was 14.5% and the percentage of patients with various type of complaints as well as the problem of occlusion was 8.1%. The ratio of the sex of the patients who complained of their occlusal disharmony was 43.0% for boys and 57.0% for girls. 2. The age distributions of the patients who had as the chief complaint occlusal disharmony were at the ages of 3 and 6 to 7 at the maximum. 3. The number of patients who were diagnosed with occlusal disharmony at the first examination was 28.5%. These included anterior cross-bite 32.5%, edge to edge bite 14.1%, cross-bite 13.0%, crowding 11.8% and et al. 4. The distribution of anterior cross-bites due to the developmental stage was divided into the deciduous dentition 59.9%, the mixed dentition 39.3% and the permanent dentition 0.8%. 5. The sex ratios of anterior cross-bites in the deciduous dentition were 45.6% for boys and 54.4% for girls. 6. The treatment of occlusal guidance for anterior cross-bite in the deciduous dentition started from ages 3 to 5. 7. The appliances used for the treatment of anterior cross-bite in the deciduous dentition were maxillary protraction 25.0%, the chin cap 20.0%, the FKO 17.5%, and the lingual arch with herical springs 15.0% and et al. 8. The status of the patients with the anterior cross-bite in the deciduous dentition as of August 1986 was that the 36.2% was under the observation, and 24.4% was under the treatment of occlusal guidance or under the observation after the treatment was done.

Roles of TRPV1 and TRPA1 in Spontaneous Pain from Inflamed Masseter Muscle.

PubMed

Wang, Sheng; Brigoli, Benjamin; Lim, Jongseuk; Karley, Alisha; Chung, Man-Kyo

2018-06-08

Craniofacial muscle pain, such as spontaneous pain and bite-evoked pain, are major symptoms in patients with temporomandibular disorders and infection. However, the underlying mechanisms of muscle pain, especially mechanisms of highly prevalent spontaneous pain, are poorly understood. Recently, we reported that transient receptor potential vanilloid 1 (TRPV1) contributes to spontaneous pain but only marginally contributes to bite-evoked pain during masseter inflammation. Here, we investigated the role of transient receptor potential ankyrin 1 (TRPA1) in spontaneous and bite-evoked pain during masseter inflammation, and dissected the relative contributions of TRPA1 and TRPV1. Masseter inflammation increased mouse grimace scale (MGS) scores and face wiping behaviors. Pharmacological or genetic inhibition of TRPA1 significantly attenuated MGS but not face wiping behaviors. MGS scores were also attenuated by scavenging putative endogenous ligands for TRPV1 or TRPA1. Simultaneous inhibition of TRPA1 by AP18 and TRPV1 by AMG9810 in masseter muscle resulted in robust inhibition of both MGS and face wiping behaviors. Administration of AP18 or AMG9810 to masseter muscle induced conditioned place preference (CPP). The extent of CPP following simultaneous administration of AP18 and AMG9810 was greater than that induced by the individual antagonists. In contrast, inflammation-induced reduction of bite force was not affected by the inhibition of TRPA1 alone or in combination with TRPV1. These results suggest that simultaneous inhibition of TRPV1 and TRPA1 produces additive relief of spontaneous pain, but does not ameliorate bite-evoked pain during masseter inflammation. Our results provide further evidence that distinct mechanisms underlie spontaneous and bite-evoked pain from inflamed masseter muscle. Copyright © 2018. Published by Elsevier Ltd.

Masticatory performance is not associated with diet quality in Class II orthognathic surgery patients.

PubMed

Shinkai, R S; Hatch, J P; Sakai, S; Mobley, C C; Rugh, J D

2001-01-01

This study evaluated the association between masticatory function, diet, and digestive system problems in 59 Class II patients 5 years after bilateral sagittal split osteotomy. Dietary intake data were recorded in 4-day diet diaries and analyzed for overall diet quality (Healthy Eating Index) and selected dietary components. Masticatory function was assessed through measurements of masticatory performance, maximum bilateral bite force, and chewing time and number of chewing strokes until the subject felt that the bolus was ready to swallow. Self-reported frequency of digestive system problems was recorded with a 7-point Likert scale questionnaire. Masticatory function was not associated with diet quality or gastrointestinal problems. There was a weak association between intake of foods that require chewing (eg, fiber, protein, meat, and vegetables) and masticatory variables. Fourteen subjects (24%) had a poor diet and 45 subjects (76%) had a diet that needed improvement according to the Healthy Eating Index. Self-reported constipation was the only digestive system problem that was significantly associated with masticatory performance.

Intraoral conversion of occlusal force to electricity and magnetism by biting of piezoelectric elements.

PubMed

Kameda, Takashi; Ohkuma, Kazuo; Sano, Natsuki; Ogura, Hideo; Terada, Kazuto

2012-01-01

Very weak electrical, magnetic and ultrasound signal stimulations are known to promote the formation, metabolism, restoration and stability of bone and surrounding tissues after treatment and operations. We have therefore investigated the possibility of intraoral generation of electricity and magnetism by occlusal force in an in vitro study. Biting bimorph piezoelectric elements with lead zirconate titanate (PZT) using dental models generated appropriate magnetism for bone formation, i. e. 0.5-0.6 gauss, and lower electric currents and higher voltages, i. e. 2.0-6.0 μA at 10-22 V (appropriate levels are 30 μA and 1.25 V), as observed by a universal testing machine. The electric currents and voltages could be changed using amplifier circuits. These results show that intraoral generation of electricity and magnetism is possible and could provide post-operative stabilization and activation of treated areas of bone and the surrounding tissues directly and/or indirectly by electrical, magnetic and ultrasound stimulation, which could accelerate healing.

Management of pediatric mandibular fractures using bioresorbable plating system - Efficacy, stability, and clinical outcomes: Our experiences and literature review.

PubMed

Singh, Mahinder; Singh, R K; Passi, Deepak; Aggarwal, Mohit; Kaur, Guneet

2016-01-01

The purpose of this study was to determine the efficacy and stability of the biodegradable fixation system for treatment of mandible fractures in pediatric patients by measuring the bite force. Sixty pediatric patients with mandibular fractures (36 males, 24 females) were included in this study. The 2.5-mm resorbable plates were adapted along Champy's line of ideal osteosynthesis and secured with four 2.5 mm diameter monocortical resorbable screws, 8 mm in length. All patients were followed for 10 months. Clinical parameters, such as soft tissue infection, nonunion, malunion, implant exposure, malocclusion, nerve injury, and bite force for stability, were prospectively assessed. Adequate fixation and primary bone healing was achieved in 100% of the cases. Six minor complications (10%) were observed: 2 soft tissue infections (3%), 1 plate dehiscence (2%), 1 malocclusion (2%), and 2 paresthesia (3%). 2.5-mm resorbable plating system along Champy's line of ideal osteosynthesis is a good treatment modality for mandible fractures in pediatric patients.

Dystrophic changes in masticatory muscles related chewing problems and malocclusions in Duchenne muscular dystrophy.

PubMed

van den Engel-Hoek, L; de Groot, I J M; Sie, L T; van Bruggen, H W; de Groot, S A F; Erasmus, C E; van Alfen, N

2016-06-01

Dysphagia in Duchenne muscular dystrophy (DMD) worsens with age, with increasingly effortful mastication. The aims of this study were to describe mastication problems in consecutive stages in a group of patients with DMD and to determine related pathophysiological aspects of masticatory muscle structure, tongue thickness, bite force and dental characteristics. Data from 72 patients with DMD (4.3 to 28.0 years), divided into four clinical stages, were collected in a cross sectional study. Problems with mastication and the need for food adaptations, in combination with increased echogenicity of the masseter muscle, were already found in the early stages of the disease. A high percentage of open bites and cross bites were found, especially in the later stages. Tongue hypertrophy also increased over time. Increased dysfunction, reflected by increasingly abnormal echogenicity, of the masseter muscle and reduced occlusal contacts (anterior and posterior open bites) were mainly responsible for the hampered chewing. In all, this study shows the increasing involvement of various elements of the masticatory system in progressive Duchenne muscular dystrophy. To prevent choking and also nutritional deficiency, early detection of chewing problems by asking about feeding and mastication problems, as well as asking about food adaptations made, is essential and can lead to timely intervention. Copyright © 2016 Elsevier B.V. All rights reserved.

Bionomic status of Anopheles epiroticus Linton & Harbach, a coastal malaria vector, in Rayong Province, Thailand.

PubMed

Sumruayphol, Suchada; Apiwathnasorn, Chamnarn; Komalamisra, Narumon; Ruangsittichai, Jiraporn; Samung, Yudthana; Chavalitshewinkoon-Petmitr, Porntip

2010-05-01

A longitudinal entomological survey was conducted to provide in-depth information on An. epiroticus and determine whether ecological and entomological factors could influence malaria transmission in Rayong Province, Thailand. The mosquitoes were collected monthly from May 2007 to April 2008 by human landing catch technique from 6:00-12:00 PM for 2 consecutive nights, at 3 collection sites. A total of 3,048 mosquitoes within 5 species were captured: An. epiroticus, Culex quinquefasciatus Say, Cx. sitiens Wiedemann, Aedes aegypti (L.) and Ae. albopictus Skuse. PCR was used for molecular identification of An. sundaicus complex, by determination of COI, ITS2, and D3 genes. The target mosquitoes were An. epiroticus, which was the predominant species, accounting for 43.8% of specimens collected. The biting cycle pattern increased during 6:00-8:00 PM and reached a maximum of 6.6 bites/person/hour by 12:00 PM. The mosquitoes varied in population density throughout the year. The highest biting rate was 37.6 bites/person/ half night in September and the lowest (10.2 bites/person/half night) in January. Nested PCR and real-time PCR techniques were used to detect the malaria parasite in An. epiroticus adult females. Nine of 926 (0.97%) mosquitoes tested were malaria parasite positive: 6 P. falciparum and 3 P. vivax. The infective mosquitoes were found in the dry and early rainy seasons. The overall annual entomological inoculation rate (EIR) in the village was 76.6. The overall parity rate was 74%. A total of 38 cement tanks were used to characterize the nature of the breeding places of An. epiroticus. An. epiroticus larvae coexisted with Aedes and Culex larvae; the maximum larval density was more than 140 larvae per dip in May. Breeding places included fresh, brackish and salt water, typically with full sunlight and mats of green algae on the water surface. The salinity of the water ranged from 0.5 to 119.4 g/l, with a narrow pH range of 8.2-8.7. Dissolved oxygen was highest in November (6.27 mg/l) and lowest in March (3.46 mg/l). The water temperature varied between 24.6 and 32.8 degrees C.

Realistic kinetic loading of the jaw system during single chewing cycles: a finite element study.

PubMed

Martinez Choy, S E; Lenz, J; Schweizerhof, K; Schmitter, M; Schindler, H J

2017-05-01

Although knowledge of short-range kinetic interactions between antagonistic teeth during mastication is of essential importance for ensuring interference-free fixed dental reconstructions, little information is available. In this study, the forces on and displacements of the teeth during kinetic molar biting simulating the power stroke of a chewing cycle were investigated by use of a finite-element model that included all the essential components of the human masticatory system, including an elastic food bolus. We hypothesised that the model can approximate the loading characteristics of the dentition found in previous experimental studies. The simulation was a transient analysis, that is, it considered the dynamic behaviour of the jaw. In particular, the reaction forces on the teeth and joints arose from contact, rather than nodal forces or constraints. To compute displacements of the teeth, the periodontal ligament (PDL) was modelled by use of an Ogden material model calibrated on the basis of results obtained in previous experiments. During the initial holding phase of the power stroke, bite forces were aligned with the roots of the molars until substantial deformation of the bolus occurred. The forces tilted the molars in the bucco-lingual and mesio-distal directions, but as the intrusive force increased the teeth returned to their initial configuration. The Ogden material model used for the PDL enabled accurate prediction of the displacements observed in experimental tests. In conclusion, the comprehensive kinetic finite element model reproduced the kinematic and loading characteristics of previous experimental investigations. © 2017 John Wiley & Sons Ltd.

Sea otter dental enamel is highly resistant to chipping due to its microstructure

PubMed Central

Ziscovici, Charles; Lucas, Peter W.; Constantino, Paul J.; Bromage, Timothy G.; van Casteren, Adam

2014-01-01

Dental enamel is prone to damage by chipping with large hard objects at forces that depend on chip size and enamel toughness. Experiments on modern human teeth have suggested that some ante-mortem chips on fossil hominin enamel were produced by bite forces near physiological maxima. Here, we show that equivalent chips in sea otter enamel require even higher forces than human enamel. Increased fracture resistance correlates with more intense enamel prism decussation, often seen also in some fossil hominins. It is possible therefore that enamel chips in such hominins may have formed at even greater forces than currently envisaged. PMID:25319817

"Closed Reduction" Principles Can Manage Diverse Conditions of Temporomandibular Joint Vertical Height Loss: From Displaced Condylar Fractures to Idiopathic Condylar Resorption.

PubMed

Nitzan, Dorrit W; Palla, Sandro

2017-06-01

The aim of this case series was to describe a modification of the classic "closed reduction" technique to manage unilateral or anterior open bite owing to a loss in vertical height (LVH) caused by several disorders and pathologies other than displaced condylar fractures. The protocol included insertion of an occlusal appliance to increase the height of the premature contact and the width of the open bite, stabilization of the dental arches by rigid arches, and the use, during sleep, of rubber bands in the open bite region to pull the mandible cranially. In addition, when awake, the patient performed physiotherapy exercises to guide the mandible into maximum intercuspation. The increased open bite enhanced the effect of the rubber bands in guiding the mandible into the original habitual occlusion and the rigid arches served to minimize tooth eruption. The present cases showed the favorable outcome of this low-risk treatment in the re-establishment of the original habitual occlusion within 1 to 4 weeks and without reconstruction of the LVH. The efficacy of this complication-free approach to correct occlusion in various conditions of LVH suggests that this protocol should be applied before venturing into surgical intervention. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Run for your life, but bite for your rights? How interactions between natural and sexual selection shape functional morphology across habitats

NASA Astrophysics Data System (ADS)

Gomes, Verónica; Carretero, Miguel A.; Kaliontzopoulou, Antigoni

2018-02-01

A central issue in evolutionary biology is how morphology, performance, and habitat use coevolve. If morphological variation is tightly associated with habitat use, then differences in morphology should affect fitness through their effect on performance within specific habitats. In this study, we investigate how evolutionary forces mold morphological traits and performance differently given the surrounding environment, at the intraspecific level. For this purpose, we selected populations of the lizard Podarcis bocagei from two different habitat types, agricultural walls and dunes, which we expected to reflect saxicolous vs ground-dwelling habits. In the laboratory, we recorded morphological traits as well as performance traits by measuring sprint speed, climbing capacity, maneuverability, and bite force. Our results revealed fast-evolving ecomorphological variation among populations of P. bocagei, where a direct association existed between head morphology and bite performance. However, we could not establish links between limb morphology and locomotor performance at the individual level. Lizards from walls were better climbers than those from dunes, suggesting a very fast evolutionary response. Interestingly, a significant interaction between habitat and sex was detected in climbing performance. In addition, lizards from dunes bit harder than those from walls, although sexual differentiation was definitely the main factor driving variation in head functional morphology. Taking into account all the results, we found a complex interaction between natural and sexual selection on whole-organism performance, which are, in some cases, reflected in morphological variation.

Run for your life, but bite for your rights? How interactions between natural and sexual selection shape functional morphology across habitats.

PubMed

Gomes, Verónica; Carretero, Miguel A; Kaliontzopoulou, Antigoni

2018-01-02

A central issue in evolutionary biology is how morphology, performance, and habitat use coevolve. If morphological variation is tightly associated with habitat use, then differences in morphology should affect fitness through their effect on performance within specific habitats. In this study, we investigate how evolutionary forces mold morphological traits and performance differently given the surrounding environment, at the intraspecific level. For this purpose, we selected populations of the lizard Podarcis bocagei from two different habitat types, agricultural walls and dunes, which we expected to reflect saxicolous vs ground-dwelling habits. In the laboratory, we recorded morphological traits as well as performance traits by measuring sprint speed, climbing capacity, maneuverability, and bite force. Our results revealed fast-evolving ecomorphological variation among populations of P. bocagei, where a direct association existed between head morphology and bite performance. However, we could not establish links between limb morphology and locomotor performance at the individual level. Lizards from walls were better climbers than those from dunes, suggesting a very fast evolutionary response. Interestingly, a significant interaction between habitat and sex was detected in climbing performance. In addition, lizards from dunes bit harder than those from walls, although sexual differentiation was definitely the main factor driving variation in head functional morphology. Taking into account all the results, we found a complex interaction between natural and sexual selection on whole-organism performance, which are, in some cases, reflected in morphological variation.

Built to bite? Differences in cranial morphology and bite performance between narrow- and broad-headed European glass eels.

PubMed

De Meyer, Jens; Van Wassenbergh, Sam; Bouilliart, Mathias; Dhaene, Jelle; Adriaens, Dominique

2018-03-01

The presence of two phenotypes in a single species is a widespread phenomenon, also observed in European eel (Anguilla anguilla). This dimorphism has been related to dietary differences in the subadult elver and yellow eel stages, with broad-heads generally feeding on harder and/or larger-bodied prey items than narrow-heads. Nevertheless, both broad- and narrow-headed phenotypes can already be found among glass eels, the stage preceding the elver eel stage. As these glass eels are considered nonfeeding, we investigate here to what degree the observed variation in head width is reflected in variation in the musculoskeletal feeding system, as well as whether this reflects the same variation observed in the older, dimorphic yellow eels. Additionally, we investigate whether musculoskeletal differences between broad- and narrow-headed glass eels have implications on their feeding performance and could thus impact prey preference when eels start feeding. Therefore, we compared the cranial musculoskeletal system of five broad- and narrow-headed glass eels using 3D-reconstructions and simulated the glass eel's bite force using the data of the muscle reconstructions. We found that the variation in the musculoskeletal system of glass eels indeed reflects that of the yellow eels. Broader heads were related to larger jaw muscles, responsible for mouth closure. Accordingly, broad-heads could generate higher bite forces than narrow-headed glass eels. In addition, broader heads were associated with higher coronoid processes and shorter hyomandibulae, beneficial for dealing with higher mechanical loadings and consequently, harder prey. We, thus, show that head width variation in glass eels is related to musculoskeletal differences which, in turn, can affect feeding performance. As such, differences in prey preference can already take place the moment the eels start feeding, potentially leading to the dimorphism observed in the elver and yellow eel stage. © 2017 Wiley Periodicals, Inc.

A Biomechanical Analysis Of Craniofacial Form And Function

NASA Astrophysics Data System (ADS)

Oyen, Ordean J.

1989-04-01

In vivo measures of bite force and bone strain obtained in growing African green monkeys (Cercopeithecus aethiops) are being used to study skull biology and geometry. Strain values and distributional patterns seen in association with forceful jaw elevation are inconsistent with conventional explanations linking upper facial morphology with masticatory function and/or using beam models of craniofacial architecture. These results mandate careful use of notions about skeletal geometry based on static analyses that have not been experimentally verified using in vivo procedures.

On the evolutionary advantage of multi-cusped teeth

PubMed Central

Bush, Mark B.; Barani, Amir; Lawn, Brian R.

2016-01-01

A hallmark of mammalian evolution is a progressive complexity in postcanine tooth morphology. However, the driving force for this complexity remains unclear: whether to expand the versatility in diet source, or to bolster tooth structural integrity. In this study, we take a quantitative approach to this question by examining the roles of number, position and height of multiple cusps in determining sustainable bite forces. Our approach is to use an extended finite-element methodology with due provision for step-by-step growth of an embedded crack to determine how fracture progresses with increasing occlusal load. We argue that multi-cusp postcanine teeth are well configured to withstand high bite forces provided that multiple cusps are contacted simultaneously to share the load. However, contact on a single near-wall cusp diminishes the strength. Location of the load points and cusp height, rather than cusp number or radius, are principal governing factors. Given these findings, we conclude that while complex tooth structures can enhance durability, increases in cusp number are more likely to be driven by the demands of food manipulation. Structural integrity of complex teeth is maintained when individual cusps remain sufficiently distant from the side walls and do not become excessively tall relative to tooth width. PMID:27558851

A study on measuring occlusal contact area using silicone impression materials: an application of this method to the bite force measurement system using the pressure-sensitive sheet.

PubMed

Ando, Katsuya; Kurosawa, Masahiro; Fuwa, Yuji; Kondo, Takamasa; Goto, Shigemi

2007-11-01

The aim of this study was to establish an objective and quantitative method of measuring occlusal contact areas. To this end, bite records were taken with a silicone impression material and a light transmission device was used to read the silicone impression material. To examine the effectiveness of this novel method, the occlusal contact area of the silicone impression material and its thickness limit of readable range were measured. Results of this study suggested that easy and highly accurate measurements of occlusal contact area could be obtained by selecting an optimal applied voltage of the light transmission device and an appropriate color of the silicone impression material.

Sea otter dental enamel is highly resistant to chipping due to its microstructure.

PubMed

Ziscovici, Charles; Lucas, Peter W; Constantino, Paul J; Bromage, Timothy G; van Casteren, Adam

2014-10-01

Dental enamel is prone to damage by chipping with large hard objects at forces that depend on chip size and enamel toughness. Experiments on modern human teeth have suggested that some ante-mortem chips on fossil hominin enamel were produced by bite forces near physiological maxima. Here, we show that equivalent chips in sea otter enamel require even higher forces than human enamel. Increased fracture resistance correlates with more intense enamel prism decussation, often seen also in some fossil hominins. It is possible therefore that enamel chips in such hominins may have formed at even greater forces than currently envisaged. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Cranial biomechanics of Diplodocus (Dinosauria, Sauropoda): testing hypotheses of feeding behaviour in an extinct megaherbivore

NASA Astrophysics Data System (ADS)

Young, Mark T.; Rayfield, Emily J.; Holliday, Casey M.; Witmer, Lawrence M.; Button, David J.; Upchurch, Paul; Barrett, Paul M.

2012-08-01

Sauropod dinosaurs were the largest terrestrial herbivores and pushed at the limits of vertebrate biomechanics and physiology. Sauropods exhibit high craniodental diversity in ecosystems where numerous species co-existed, leading to the hypothesis that this biodiversity is linked to niche subdivision driven by ecological specialisation. Here, we quantitatively investigate feeding behaviour hypotheses for the iconic sauropod Diplodocus. Biomechanical modelling, using finite element analysis, was used to examine the performance of the Diplodocus skull. Three feeding behaviours were modelled: muscle-driven static biting, branch stripping and bark stripping. The skull was found to be `over engineered' for static biting, overall experiencing low stress with only the dentition enduring high stress. When branch stripping, the skull, similarly, is under low stress, with little appreciable difference between those models. When simulated for bark stripping, the skull experiences far greater stresses, especially in the teeth and at the jaw joint. Therefore, we refute the bark-stripping hypothesis, while the hypotheses of branch stripping and/or precision biting are both consistent with our findings, showing that branch stripping is a biomechanically plausible feeding behaviour for diplodocids. Interestingly, in all simulations, peak stress is observed in the premaxillary-maxillary `lateral plates', supporting the hypothesis that these structures evolved to dissipate stress induced while feeding. These results lead us to conclude that the aberrant craniodental form of Diplodocus was adapted for food procurement rather than resisting high bite forces.

40 CFR 745.63 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... with lead-based paint that a young child can mouth or chew. A chewable surface is the same as an... be dented by the bite of a young child are not considered chewable. Common area group means a group... exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames...

40 CFR 745.63 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... with lead-based paint that a young child can mouth or chew. A chewable surface is the same as an... be dented by the bite of a young child are not considered chewable. Common area group means a group... exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames...

40 CFR 745.63 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... with lead-based paint that a young child can mouth or chew. A chewable surface is the same as an... be dented by the bite of a young child are not considered chewable. Common area group means a group... exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames...

40 CFR 745.63 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... with lead-based paint that a young child can mouth or chew. A chewable surface is the same as an... be dented by the bite of a young child are not considered chewable. Common area group means a group... exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames...

Management of pediatric mandibular fractures using bioresorbable plating system – Efficacy, stability, and clinical outcomes: Our experiences and literature review

PubMed Central

Singh, Mahinder; Singh, R.K.; Passi, Deepak; Aggarwal, Mohit; Kaur, Guneet

2015-01-01

Aims The purpose of this study was to determine the efficacy and stability of the biodegradable fixation system for treatment of mandible fractures in pediatric patients by measuring the bite force. Methods Sixty pediatric patients with mandibular fractures (36 males, 24 females) were included in this study. The 2.5-mm resorbable plates were adapted along Champy's line of ideal osteosynthesis and secured with four 2.5 mm diameter monocortical resorbable screws, 8 mm in length. All patients were followed for 10 months. Clinical parameters, such as soft tissue infection, nonunion, malunion, implant exposure, malocclusion, nerve injury, and bite force for stability, were prospectively assessed. Results Adequate fixation and primary bone healing was achieved in 100% of the cases. Six minor complications (10%) were observed: 2 soft tissue infections (3%), 1 plate dehiscence (2%), 1 malocclusion (2%), and 2 paresthesia (3%). Conclusion 2.5-mm resorbable plating system along Champy's line of ideal osteosynthesis is a good treatment modality for mandible fractures in pediatric patients. PMID:27195206

Coming of age in an ant colony: cephalic muscle maturation accompanies behavioral development in Pheidole dentata

NASA Astrophysics Data System (ADS)

Muscedere, Mario L.; Traniello, James F. A.; Gronenberg, Wulfila

2011-09-01

Although several neurobiological and genetic correlates of aging and behavioral development have been identified in social insect workers, little is known about how other age-related physiological processes, such as muscle maturation, contribute to task performance. We examined post-eclosion growth of three major muscles of the head capsule in major and minor workers of the ant Pheidole dentata using workers of different ages with distinct task repertoires. Mandible closer muscle fibers, which provide bite force and are thus critical for the use of the mandibles for biting and load carrying, fill the posterio-lateral portions of the head capsule in mature, older workers of both subcastes. Mandible closer fibers of newly eclosed workers, in contrast, are significantly thinner in both subcastes and grow during at least the next 6 days in minor workers, suggesting this muscle has reduced functionality for a substantial period of adult life and thus constrains task performance capability. Fibers of the antennal muscles and the pharynx dilator, which control antennal movements and food intake, respectively, also increase significantly in thickness with age. However, these fibers are only slightly thinner in newly eclosed workers and attain their maximum thickness over a shorter time span in minors. The different growth rates of these functionally distinct muscles likely have consequences for how adult P. dentata workers, particularly minors, develop their full and diverse task repertoire as they age. Workers may be capable of feeding and interacting socially soon after eclosion, but require a longer period of development to effectively use their mandibles, which enable the efficient performance of tasks ranging from nursing to foraging and defense.

Functional morphology of the cranio-mandibular complex of the Guira cuckoo (Aves).

PubMed

Pestoni, Sofía; Degrange, Federico Javier; Tambussi, Claudia Patricia; Demmel Ferreira, María Manuela; Tirao, Germán Alfredo

2018-06-01

The cranio-mandibular complex is an important structure involved in food capture and processing. Its morphology is related to the nature of the food item. Jaw muscles enable the motion of this complex and their study is essential for functional and evolutionary analysis. The present study compares available behavioral and dietary data obtained from the literature with novel results from functional morphological analyses of the cranio-mandibular complex of the Guira cuckoo (Guira guira) to understand its relationship with the zoophagous trophic habit of this species. The bite force was estimated based on muscle dissections, measurements of the physiological cross-sectional area, and biomechanical modeling of the skull. The results were compared with the available functional morphological data for other birds. The standardized bite force of G. guira is higher than predicted for exclusively zoophagous birds, but lower than for granivorous and/or omnivorous birds. Guira guira possesses the generalized jaw muscular system of neognathous birds, but some features can be related to its trophic habit. The external adductor muscles act mainly during food item processing and multiple aspects of this muscle group are interpreted to increase bite force, that is, their high values of muscle mass, their mechanical advantage (MA), and their perpendicular orientation when the beak is closed. The m. depressor mandibulae and the m. pterygoideus dorsalis et ventralis are interpreted to prioritize speed of action (low MA values), being most important during prey capture. The supposed ecological significance of these traits is the potential to widen the range of prey size that can be processed and the possibility of rapidly capturing agile prey through changes in the leverage of the muscles involved in opening and closing of the bill. This contributes to the trophic versatility of the species and its ability to thrive in different habitats, including urban areas. © 2018 Wiley Periodicals, Inc.

Biomechanical three-dimensional finite element analysis of monolithic zirconia crown with different cement type

PubMed Central

2015-01-01

PURPOSE The objective of this study was to evaluate the influence of various cement types on the stress distribution in monolithic zirconia crowns under maximum bite force using the finite element analysis. MATERIALS AND METHODS The models of the prepared #46 crown (deep chamfer margin) were scanned and solid models composed of the monolithic zirconia crown, cement layer, and prepared tooth were produced using the computer-aided design technology and were subsequently translated into 3-dimensional finite element models. Four models were prepared according to different cement types (zinc phosphate, polycarboxylate, glass ionomer, and resin). A load of 700 N was applied vertically on the crowns (8 loading points). Maximum principal stress was determined. RESULTS Zinc phosphate cement had a greater stress concentration in the cement layer, while polycarboxylate cement had a greater stress concentration on the distal surface of the monolithic zirconia crown and abutment tooth. Resin cement and glass ionomer cement showed similar patterns, but resin cement showed a lower stress distribution on the lingual and mesial surface of the cement layer. CONCLUSION The test results indicate that the use of different luting agents that have various elastic moduli has an impact on the stress distribution of the monolithic zirconia crowns, cement layers, and abutment tooth. Resin cement is recommended for the luting agent of the monolithic zirconia crowns. PMID:26816578

Dinosaur biomechanics

PubMed Central

Alexander, R. McNeill

2006-01-01

Biomechanics has made large contributions to dinosaur biology. It has enabled us to estimate both the speeds at which dinosaurs generally moved and the maximum speeds of which they may have been capable. It has told us about the range of postures they could have adopted, for locomotion and for feeding, and about the problems of blood circulation in sauropods with very long necks. It has made it possible to calculate the bite forces of predators such as Tyrannosaurus, and the stresses they imposed on its skull; and to work out the remarkable chewing mechanism of hadrosaurs. It has shown us how some dinosaurs may have produced sounds. It has enabled us to estimate the effectiveness of weapons such as the tail spines of Stegosaurus. In recent years, techniques such as computational tomography and finite element analysis, and advances in computer modelling, have brought new opportunities. Biomechanists should, however, be especially cautious in their work on animals known only as fossils. The lack of living specimens and even soft tissues oblige us to make many assumptions. It is important to be aware of the often wide ranges of uncertainty that result. PMID:16822743

[Z2 appliance: the pre-adjusted appliance based on Chinese normal occlusion].

PubMed

Zeng, Xiang-long; Gao, Xue-mei

2008-12-01

Z2 appliance is the pre-adjusted appliance designed for Chinese orthodontic patients. The prescription of the appliance is based on Chinese normal occlusion, which is much different from the West in the first and the second orders as well as the third one. The appliance routinely includes 20 brackets and 8 molar buccal tubers with 3 standard arch forms. Clinically, continued light force is used in whole treatment. The side-effects such as forward tipping of incisors, bite deepening and loss of molar anchorage are reduced further due to fewer tips built into the anterior brackets as well as lower friction elastometric modules used during aligning and leveling. In condition of arch are leveled completely, 0.48 mm x 0.64 mm stainless steel archwire with 1.47 N retraction force is the best combination for sliding mechanics, which is proved by 3D nonlinear finite element study. Self drilling micro-screw is used for maximum anchorage. In finishing stage 0.53 mm x 0.64 mm NT arch wire is added in order to get full torque expressing. The research of Chinese pre-adjusted appliance has been lasted for more than 10 years in the department and clinical studies on Z2 appliance show that with minimal wire bending, treatment is more efficient and result is high quality and more consistent for Chinese orthodontic patients.

Normative Development of Physical Aggression from 8 to 26 Months

ERIC Educational Resources Information Center

Naerde, Ane; Ogden, Terje; Janson, Harald; Zachrisson, Henrik Daae

2014-01-01

This study investigated the normative use and developmental course of physical aggression (PA), defined as use of physical force such as hitting, biting, and kicking, from 8 to 26 months and predictors thereof. We used data from the Behavior Outlook Norwegian Developmental Study, comprising 1,159 children (559 girls and 600 boys). Both mothers and…

States' Fiscal Woes Raise Anxiety Level on School Budgets

ERIC Educational Resources Information Center

Zehr, Mary Ann

2007-01-01

A long-projected revenue chill is beginning to bite in a number of states, putting pressure on education policymakers to defend existing programs--and, in some cases, forcing them to prepare for the worst if budget cuts become a reality. The causes vary, from slack property-tax receipts in Florida to a chronically sluggish economy in Michigan. But…

Puncture-and-Pull Biomechanics in the Teeth of Predatory Coelurosaurian Dinosaurs.

PubMed

Torices, Angelica; Wilkinson, Ryan; Arbour, Victoria M; Ruiz-Omeñaca, Jose Ignacio; Currie, Philip J

2018-05-07

The teeth of putatively carnivorous dinosaurs are often blade-shaped with well-defined serrated cutting edges (Figure 1). These ziphodont teeth are often easily differentiated based on the morphology and density of the denticles [1, 2]. A tearing function has been proposed for theropod denticles in general [3], but the functional significance of denticle phenotypic variation has received less attention. In particular, the unusual hooked denticles found in troodontids suggest a different feeding strategy or diet compared to other small theropods. We used a two-pronged approach to investigate the function of denticle shape variation across theropods with both congruent body shapes and sizes (e.g., dromaeosaurids versus troodontids) and highly disparate body shapes and sizes (e.g., troodontids versus tyrannosaurids), using microwear and finite element analyses (Figure 1). We found that many toothed coelurosaurian theropods employed a puncture-and-pull feeding movement, in which parallel scratches form while biting down into prey and oblique scratches form as the head is pulled backward with the jaws closed. In finite element simulations, theropod teeth had the lowest stresses when bite forces were aligned with the oblique family of microwear scratches. Different denticle morphologies performed differently under a variety of simulated biting angles: Dromaeosaurus and Saurornitholestes were well-adapted for handling struggling prey, whereas troodontid teeth were more likely to fail at non-optimal bite angles. Troodontids may have favored softer, smaller, or immobile prey. Copyright © 2018 Elsevier Ltd. All rights reserved.

Spontaneous correction of anterior crossbite by RPE anchored on deciduous teeth in the early mixed dentition.

PubMed

Rosa, M; Lucchi, P; Mariani, L; Caprioglio, A

2012-09-01

The purpose of this study was to evaluate the effectiveness of Haas RPE anchored on deciduous teeth in the early mixed dentition, for inducing the spontaneous correction of permanent incisor's crossbite, without compliance, without post bite-plane and no involvement of the permanent teeth. The sample group comprised 50 consecutive patients (mean age 8y 5m, SD 2y 1m), 31 males, 19 females. They showed a cross-bite affecting one or more permanent incisors, for a total of 70 teeth. The patients were treated with Haas RPE appliance anchored on second deciduous molars and bonded on deciduous canines. No direct forces were applied on the permanent teeth. Anterior crossbite self-corrected 'spontaneously' in 84% of the cases. Lateral incisors had a higher rate of self-correction than central incisors. All hyper-divergent subjects showed a spontaneous crossbite self-correction. The early maxillary expansion by Haas RPE anchored on deciduous teeth is an efficient and effective procedure to induce the anterior crossbite self-correction in the early mixed dentition without the need of a bite-plane, no involvement of the permanent teeth and without compliance.

Interdependence of domestic malaria prevention measures and mosquito-human interactions in urban Dar es Salaam, Tanzania.

PubMed

Geissbühler, Yvonne; Chaki, Prosper; Emidi, Basiliana; Govella, Nicodemus J; Shirima, Rudolf; Mayagaya, Valeliana; Mtasiwa, Deo; Mshinda, Hassan; Fillinger, Ulrike; Lindsay, Steven W; Kannady, Khadija; de Castro, Marcia Caldas; Tanner, Marcel; Killeen, Gerry F

2007-09-19

Successful malaria vector control depends on understanding behavioural interactions between mosquitoes and humans, which are highly setting-specific and may have characteristic features in urban environments. Here mosquito biting patterns in Dar es Salaam, Tanzania are examined and the protection against exposure to malaria transmission that is afforded to residents by using an insecticide-treated net (ITN) is estimated. Mosquito biting activity over the course of the night was estimated by human landing catch in 216 houses and 1,064 residents were interviewed to determine usage of protection measures and the proportion of each hour of the night spent sleeping indoors, awake indoors, and outdoors. Hourly variations in biting activity by members of the Anopheles gambiae complex were consistent with classical reports but the proportion of these vectors caught outdoors in Dar es Salaam was almost double that of rural Tanzania. Overall, ITNs confer less protection against exophagic vectors in Dar es Salaam than in rural southern Tanzania (59% versus 70%). More alarmingly, a biting activity maximum that precedes 10 pm and much lower levels of ITN protection against exposure (38%) were observed for Anopheles arabiensis, a vector of modest importance locally, but which predominates transmission in large parts of Africa. In a situation of changing mosquito and human behaviour, ITNs may confer lower, but still useful, levels of personal protection which can be complemented by communal transmission suppression at high coverage. Mosquito-proofing houses appeared to be the intervention of choice amongst residents and further options for preventing outdoor transmission include larviciding and environmental management.

Temperature effects on snapping performance in the common snapper Chelydra serpentina (Reptilia, Testudines).

PubMed

Vervust, Bart; Brecko, Jonathan; Herrel, Anthony

2011-01-01

Studies on the effect of temperature on whole-animal performance traits other than locomotion are rare. Here we investigate the effects of temperature on the performance of the turtle feeding apparatus in a defensive context. We measured bite force and the kinematics of snapping in the Common Snapping Turtle (Chelydra serpentina) over a wide range of body temperatures. Bite force performance was thermally insensitive over the broad range of temperatures typically experienced by these turtles in nature. In contrast, neck extension (velocity, acceleration, and deceleration) and jaw movements (velocity, acceleration, and deceleration) showed clear temperature dependence with peak acceleration and deceleration capacity increasing with increasing temperatures. Our results regarding the temperature dependence of defensive behavior are reflected by the ecology and overall behavior of this species. These data illustrate the necessity for carefully controlling T(b) when carrying out behavioral and functional studies on turtles as temperature affects the velocity, acceleration, and deceleration of jaw and neck extension movements. More generally, these data add to the limited but increasing number of studies showing that temperature may have important effects on feeding and defensive performance in ectotherms. © 2010 Wiley-Liss, Inc.

Unilateral distalization of a maxillary molar with sliding mechanics: a case report.

PubMed

Keles, Ahmet

2002-06-01

A unilateral Class II relationship could arise due to early loss of an upper second deciduous molar on one side during the mixed dentition period. This would allow the mesial drift of the molars, which may block the eruption of the second premolar. A 15-year 8-month-old male patient presented with a Class II molar relationship on the right, and Class I canine and molar relationship on the left side. His E was extracted when he was 5 years old. The 54 were impacted and the 3 was ectopically positioned due to the space loss from the mesial migration of the 76. In addition 21 1 were in cross-bite. Skeletally he had Class III tendency with low MMPA. He presented with a straight profile and retruded upper lip. For maxillary molar distalization, a newly developed 'Keles Slider' was used. The appliance was composed of one premolar and two molar bands, and the anchorage unit was composed of a wide Nance button. 46 were connected to the Nance button and, therefore, included into the anchorage unit. The point of distal force application was close to the centre of resistance of the 6 and parallel to the occlusal plane. Ni-Ti coil springs were used and 200 g of distal force was applied. Seven months later the space required for eruption of the permanent premolars and canine was regained, and the anterior cross-bite corrected. The appliance was removed and final alignment of the teeth was achieved with fixed appliances. At the end of the second phase treatment Class I molar and canine relationship was achieved on the both sides, the anterior cross-bite was corrected, inter-incisal angle was improved, and ideal overbite and overjet relationship was achieved. The active treatment time was 27 months.

Repellency and toxicity of aromatic plant extracts against the mosquito Culex pipiens molestus (Diptera: Culicidae).

PubMed

Traboulsi, Abdallah F; El-Haj, Samih; Tueni, Marie; Taoubi, Khalil; Nader, Natalie Abi; Mrad, Abir

2005-06-01

The insecticidal activities of essential oil extracts from leaves, flowers and roots of aromatic plants against fourth-instar larvae of the mosquito Culex pipiens molestus Forskal were determined. Extracts of Foeniculum vulgare Mill were the most toxic, followed by those of Ferula hermonis Boiss, Citrus sinensis Osbeck, Pinus pinea L, Laurus nobilis L and Eucalyptus spp with LC50 values of 24.5, 44.0, 60.0, 75.0, 117.0 and 120.0 mg litre(-1), respectively. Combination tests between the LC50 and the maximum sub-lethal concentration (MSLC) were determined. Over 20 major components were identified in extracts from each plant species tested. Five essential oils and nine pure components were studied for their repellency against mosquito bites. Terpineol and 1,8-cineole were the most effective against Culex pipiens molestus bites offering complete protection for 1.6 and 2 h, respectively.

[Urban malaria in Yaounde (Cameroon). 2. Entomologic study in 2 suburban districts].

PubMed

Fondjo, E; Robert, V; Le Goff, G; Toto, J C; Carnevale, P

1992-01-01

A one year entomological survey was carried out to precise the malaria vectors and the malaria transmission in Yaounde, the Cameroon capital (800,000 inhabitants). The study was done in two districts not yet fully urbanized: Nkol Bikok and Nkol Bisson. The latter is located at the periphery and has a pool. Anopheles gambiae was the only human malaria vector. Its agressivity for man depended on the urbanization of the district. Annual man biting rate was 284 in Nkol Bikok and 1,813 in Nkol Bisson. The densities were maximum in May-June and in October-November, corresponding to the end of the short and long rainy seasons. The presence of A. gambiae was permanent except in August-September in Nkol Bikok. In Nkol Bisson the density was higher in the houses near the pool. The yearly inoculation rate (h) was 14 in Nkol Bikok and 30 in Nkol Bisson. The vectorial transmission was observed in may in Nkol Bikok and during four months (June, August, January, February) in Nkol Bisson. These entomological data showed clearly that malaria transmission actually occurred in Yaounde and that the probability to receive at least one infected anopheline bite per year was very near to 1 for inhabitants unprotected against mosquito bites.

Specific Diurnal EMG Activity Pattern Observed in Occlusal Collapse Patients: Relationship between Diurnal Bruxism and Tooth Loss Progression

PubMed Central

Kawakami, Shigehisa; Kumazaki, Yohei; Manda, Yosuke; Oki, Kazuhiro; Minagi, Shogo

2014-01-01

Aim The role of parafunctional masticatory muscle activity in tooth loss has not been fully clarified. This study aimed to reveal the characteristic activity of masseter muscles in bite collapse patients while awake and asleep. Materials and Methods Six progressive bite collapse patients (PBC group), six age- and gender-matched control subjects (MC group), and six young control subjects (YC group) were enrolled. Electromyograms (EMG) of the masseter muscles were continuously recorded with an ambulatory EMG recorder while patients were awake and asleep. Diurnal and nocturnal parafunctional EMG activity was classified as phasic, tonic, or mixed using an EMG threshold of 20% maximal voluntary clenching. Results Highly extended diurnal phasic activity was observed only in the PBC group. The three groups had significantly different mean diurnal phasic episodes per hour, with 13.29±7.18 per hour in the PBC group, 0.95±0.97 per hour in the MC group, and 0.87±0.98 per hour in the YC group (p<0.01). ROC curve analysis suggested that the number of diurnal phasic episodes might be used to predict bite collapsing tooth loss. Conclusion Extensive bite loss might be related to diurnal masticatory muscle parafunction but not to parafunction during sleep. Clinical Relevance: Scientific rationale for study Although mandibular parafunction has been implicated in stomatognathic system breakdown, a causal relationship has not been established because scientific modalities to evaluate parafunctional activity have been lacking. Principal findings This study used a newly developed EMG recording system that evaluates masseter muscle activity throughout the day. Our results challenge the stereotypical idea of nocturnal bruxism as a strong destructive force. We found that diurnal phasic masticatory muscle activity was most characteristic in patients with progressive bite collapse. Practical implications The incidence of diurnal phasic contractions could be used for the prognostic evaluation of stomatognathic system stability. PMID:25010348

Miniplate with a bendable C-tube head allows the clinician to alter biomechanical advantage without physically moving the skeletal anchorage device.

PubMed

Seo, Kyung-Won; Ahn, Hyo-Won; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald

2014-01-01

This article introduces a binary function of a miniplate with a bendable C-tube head used in corticotomy-assisted segment intrusion. The advantage of the device is that the point of force application can be altered without having to move the miniplate or place an additional anchorage device. Cases for this study were selected from patients who received perisegmental corticotomy with compression osteogenesis (Speedy Surgical Orthodontics) for segmental intrusion. For the skeletal anchorage on patients who received Speedy Surgical Orthodontics for posterior segment intrusion to improve on severe open bite correction, the C-tube was placed on the buccal wall of the maxilla for traction of orthopedic force as a temporary skeletal anchorage. The C-tube head portion is made with titanium grade II, which makes bending easy with a Weingart plier. This adjustment regains distance and range needed to continue intrusion of posterior segment. As an alternative to orthognathic surgery to correct a severe open bite, perisegmental corticotomy combined with orthopedic force application from a temporary skeletal anchorage device can be used. The corticotomy-assisted segment intrusion is a 2-stage procedure: first, the corticotomy is performed in the palate and 2 weeks later in the buccal alveolus. A C-plate was placed in the midpalatal area, and a C-tube was placed apical to the buccal corticotomy site. Elastics were used with orthopedic forces to induce compression osteogenesis. As the intrusion took place, the elastic stretched, and resultant force and range in the buccal segment decreased. The C-tube head was adjusted by bending to gain more distance, reviving the elastic force on the posterior segment until desired intrusion was accomplished. The miniplate with a bendable C-tube head serves for temporary skeletal anchorage of orthopedic traction force to achieve segmental intrusion and has the advantage that the bendable head can be adjusted to improve the force application for intrusion without having to move or place another temporary skeletal anchorage device.

A Comparison of 2 Current-Issue Army Boots.

DTIC Science & Technology

2000-01-01

at 3.5 mph, mean (SD) 32 21 .Maximum heel- strike vertical force (N) while walking at 3.5 mph, mean (SD) 33 22 Maximum heel- strike braking force...while running at 6.5 mph, mean (SD) 38 34 Maximum force on the hip (N) while running at 6.5 mph, mean (SD) 38 35 Maximum vertical heel- strike force (N...during 6.5 mph running, mean (SD) 39 36. Maximum heel- strike braking force (N) while running at 6.5 mph, mean (SD) 39 37. Maximum vertical push

Animal bites - self-care

MedlinePlus

Bites - animals - self-care ... Most animal bites come from pets. Dog bites are common and most often happen to children. Cat bites are ... which can cause deeper puncture wounds. Most other animal bites are caused by stray or wild animals, ...

A fatal mongoose bite.

PubMed

Tumram, Nilesh Keshav; Bardale, Rajesh Vaijnathrao; Dixit, Pradeep Gangadhar; Deshmukh, Ashutosh Yashwant

2012-11-19

Animal bite is a bite wound from a pet, farm or wild animal. Dog bites make up 80-85% of all reported incidents. Cats amount for about 10% of reported bites and other animals such as rodents, rabbits, horses, raccoons, bats and monkeys amount to 5-10%. Bites by mongoose are uncommon. Here, we present a case of fatal mongoose bite to an elderly woman who died as a complication of streptococcal infection at the bite site.

Epidemiologic and clinical aspects of animal bite injuries.

PubMed

Kizer, K W

1979-04-01

During 1975, 332 animal bite injuries accounted for 1.2% of all surgical problems treated at the UCLA Hospital Emergency Department. Data on 307 bite injuries were available and analyzed for environmental, animal, human, interaction, and clinical factors. More than half of the dog bites and almost three fourths of the cat bites-scratches happened at or near the victims' homes. Dog bites were almost twice as common among men, while cat bites-scratches were twice as common among women. Of the incidents in which ownership information was available, 85% of dog bites and 80% of cat bites-scratches were from an animal belonging to the victim, his family or friends, or another known person. Forty-three percent of dog bites, and 52% of cat bites-scratches were provoked, that is, happened while the victim was interacting with the animal. Of bites of the head and/or neck, 38% injured the upper lip; 17% of dog bites injured the eye or adjacent tissues; 48% were in children less than ten-years-old. On fifth of cat bites-scratches involved the head and/or neck, 60% of these injured orbital or periorbital tissues. Over 2% of patients were hospitalized. Five percent of dog bite victims and 29% of cat bite-scratch victims returned with complications, mostly cellulitis or lymphangitis. Pasteurella multocida was the most common pathogen cultured, as evidenced by the 50% and 80% culture-positive rates for dog and cat bite-scratches respectively in this series.

In vivo bone strain and finite element modeling of a rhesus macaque mandible during mastication.

PubMed

Panagiotopoulou, Olga; Iriarte-Diaz, José; Wilshin, Simon; Dechow, Paul C; Taylor, Andrea B; Mehari Abraha, Hyab; Aljunid, Sharifah F; Ross, Callum F

2017-10-01

Finite element analysis (FEA) is a commonly used tool in musculoskeletal biomechanics and vertebrate paleontology. The accuracy and precision of finite element models (FEMs) are reliant on accurate data on bone geometry, muscle forces, boundary conditions and tissue material properties. Simplified modeling assumptions, due to lack of in vivo experimental data on material properties and muscle activation patterns, may introduce analytical errors in analyses where quantitative accuracy is critical for obtaining rigorous results. A subject-specific FEM of a rhesus macaque mandible was constructed, loaded and validated using in vivo data from the same animal. In developing the model, we assessed the impact on model behavior of variation in (i) material properties of the mandibular trabecular bone tissue and teeth; (ii) constraints at the temporomandibular joint and bite point; and (iii) the timing of the muscle activity used to estimate the external forces acting on the model. The best match between the FEA simulation and the in vivo experimental data resulted from modeling the trabecular tissue with an isotropic and homogeneous Young's modulus and Poisson's value of 10GPa and 0.3, respectively; constraining translations along X,Y, Z axes in the chewing (left) side temporomandibular joint, the premolars and the m 1 ; constraining the balancing (right) side temporomandibular joint in the anterior-posterior and superior-inferior axes, and using the muscle force estimated at time of maximum strain magnitude in the lower lateral gauge. The relative strain magnitudes in this model were similar to those recorded in vivo for all strain locations. More detailed analyses of mandibular strain patterns during the power stroke at different times in the chewing cycle are needed. Copyright © 2017. Published by Elsevier GmbH.

In vivo bone strain and finite element modeling of a rhesus macaque mandible during mastication☆

PubMed Central

Panagiotopoulou, Olga; Iriarte-Diaz, José; Wilshin, Simon; Dechow, Paul C.; Taylor, Andrea B.; Abraha, Hyab Mehari; Aljunid, Sharifah F.; Ross, Callum F.

2018-01-01

Finite element analysis (FEA) is a commonly used tool in musculoskeletal biomechanics and vertebrate paleontology. The accuracy and precision of finite element models (FEMs) are reliant on accurate data on bone geometry, muscle forces, boundary conditions and tissue material properties. Simplified modeling assumptions, due to lack of in vivo experimental data on material properties and muscle activation patterns, may introduce analytical errors in analyses where quantitative accuracy is critical for obtaining rigorous results. A subject-specific FEM of a rhesus macaque mandible was constructed, loaded and validated using in vivo data from the same animal. In developing the model, we assessed the impact on model behavior of variation in (i) material properties of the mandibular trabecular bone tissue and teeth; (ii) constraints at the temporomandibular joint and bite point; and (iii) the timing of the muscle activity used to estimate the external forces acting on the model. The best match between the FEA simulation and the in vivo experimental data resulted from modeling the trabecular tissue with an isotropic and homogeneous Young’s modulus and Poisson’s value of 10 GPa and 0.3, respectively; constraining translations along X,Y, Z axes in the chewing (left) side temporomandibular joint, the premolars and the m1; constraining the balancing (right) side temporomandibular joint in the anterior-posterior and superior-inferior axes, and using the muscle force estimated at time of maximum strain magnitude in the lower lateral gauge. The relative strain magnitudes in this model were similar to those recorded in vivo for all strain locations. More detailed analyses of mandibular strain patterns during the power stroke at different times in the chewing cycle are needed. PMID:29037463

Cat and Dog Bites

MedlinePlus

... Wellness Staying Healthy Pets and Animals Cat and Dog Bites Cat and Dog Bites Share Print Cat and dog bites are common injuries. A family pet or ... bites. Path to safety If a cat or dog bites you, you should: Wash the wound gently ...

Comparative study to evaluate the accuracy of polyether occlusal bite registration material and occlusal registration wax as a guide for occlusal reduction during tooth preparation.

PubMed

Joshi, Niranjan; Shetty, Sridhar N; Prasad, Krishna D

2013-01-01

The use of different materials and techniques has been studied to decide the safest quantum of reduction of the occlusal surfaces. However, these methods provide limited information as to the actual amount of reduction with limitations in accuracy, accessibility and complexity. The objective of this study was to compare and evaluate the reliability of the most commonly used occlusal registration wax that with polyether bite registration material as a guide for occlusal reduction required during tooth preparations. For the purpose of this study, 25 abutment teeth requiring tooth preparation for fixed prosthesis were selected and tooth preparations carried out. Modeling wax strips of specific dimensions were placed onto the cast of prepared tooth, which was mounted on maximum intercuspation on the articulator and the articulator was closed. The thickness of the wax registration was measured at three zones namely two functional cusps and central fossa. Similar measurements were made using the polyether bite registration material and prosthesis at the same zones. The data was tabulated and was subjected to statistical analysis using anova test and Tukey honestly significant difference test. The differences in thickness between wax record and prosthesis by 0.1346 mm, whereas the difference between polyether and prosthesis was 0.02 mm with a P value of 0.042, which is statistically significant. This means that the wax record was 8.25% larger than the prosthesis while polyether was just 1.27% larger than the prosthesis. The clinical significance of the above analysis is that Ramitec polyether bite registration material is most suitable material when compared with commonly used modeling wax during the tooth preparation.

Malocclusion in Early Anatomically Modern Human: A Reflection on the Etiology of Modern Dental Misalignment

PubMed Central

Sarig, Rachel; Slon, Viviane; Abbas, Janan; May, Hila; Shpack, Nir; Vardimon, Alexander Dan; Hershkovitz, Israel

2013-01-01

Malocclusions are common in modern populations. Yet, as the study of occlusion requires an almost intact dentition in both the maxilla and mandible, searching for the ultimate cause of malocclusion is a challenge: relatively little ancient material is available for research on occlusal states. The Qafzeh 9 skull is unique, as its preserved dentition allowed us to investigate the presence and manifestations of malocclusion. The aim of this study was thus to examine the occlusal condition in the Qafzeh 9 specimen in light of modern knowledge regarding the etiology of malocclusion. We revealed a pathologic occlusion in the Qafzeh 9 skull that probably originated in the early developmental stage of the dentition, and was aggravated by forces applied by mastication. When arch continuity is interrupted due to misalignment of teeth as in this case, force transmission is not equal on both sides, causing intra-arch outcomes such as mesialization of the teeth, midline deviation, rotations and the aggravation of crowding. All are evident in the Qafzeh 9 skull: the midline deviates to the left; the incisors rotate mesio-buccally; the left segment is constricted; the left first molar is buccally positioned and the left premolars palatally tilted. The inter-arch evaluation revealed anterior cross bite with functional shift that might affect force transmission and bite force. In conclusion, the findings of the current study suggest that malocclusion of developmental origin was already present in early anatomically modern humans (AMH) (the present case being the oldest known case, dated to ca. 100,000 years); that there is no basis to the notion that early AMH had a better adjustment between teeth and jaw size; and that jaw-teeth size discrepancy could be found in prehistoric populations and is not a recent phenomenon. PMID:24278319

Dog and cat bites: epidemiologic analyses suggest different prevention strategies.

PubMed Central

Patrick, G R; O'Rourke, K M

1998-01-01

OBJECTIVE: To examine the characteristics of reported dog and cat bite incidents in El Paso, Texas, and their implications for local bite prevention programs. METHODS: The authors reviewed a random sample of reported dog bites and all reported cat bites in El Paso, Texas, in 1995 using existing animal control surveillance data. RESULTS: The majority of cat bites (89.4%) were provoked, with females (57.5%) and adults (68.3%) more likely to be victims than males or children. In contrast, just under half of dog bites (44.6%) were provoked, with males (65.6%) and children (63%) more likely to be victims than females or adults. Dogs that had not been vaccinated for rabies were involved in 65% of dog bites and cats that had not been vaccinated for rabies were involved in 92% of cat bites. CONCLUSION: Effective bite prevention programs should address the finding that both restrained and unrestrained dogs may bite even when unprovoked and that unrestrained cats usually bite when provoked. PMID:9633872

Cause, setting and ownership analysis of dog bites in Bay County, Florida from 2009 to 2010.

PubMed

Matthias, J; Templin, M; Jordan, M M; Stanek, D

2015-02-01

Emergency room and hospital discharge data have been used to describe the risk factors and public health impact of dog bites. These data sets are based on financial charges for severe bites and underestimates dog bite burdens within communities. This study expands both the source of information and risk factor data collected to provide demographic analysis of dog bite injury risk factors reported in Bay County, Florida in 2009-2010. Extended data for dog bites reported by various sources from January 1, 2009 to December 31, 2010 were collected by Florida Department of Health in Bay County. Data collected included bite victim's age and gender, primary reported cause of bite, setting, dog's restraint status and relationship between the victim and the dog. A total of 799 bites were reported. Most bites (55%) were reported first by healthcare practitioners, particularly bites involving children<6 years. Bites involving unfamiliar dogs and dogs off the owner's property were more likely to be reported by other sources. Boys aged 6-14 years accounted for 2.24 times more bites than same-aged females (P<0.001) and had the highest incidence with 424 bites per 100,000 persons per year. Persons 6 years or older were 3.6 times more likely to be bitten by an unfamiliar dog. Inappropriate behaviour management was the most common cause of bites (26%), followed by protective behaviour (24%). Bites of unknown cause were 2.5 times more likely in children<6 years. Separating dog fights was the most common cause of bites for persons 15 years or older (24%); females were significantly more likely to be bit than males (P=0.01). Bites by unrestrained dogs off the owner's property (32% of all bites) most commonly involved males. Estimates based solely on healthcare discharge data significantly underestimate dog bite burden within a community. Characterizing these risks by age group or gender provides an opportunity to implement targeted interventions to prevent dog bites. © 2014 Blackwell Verlag GmbH.

An advanced dissymmetric rolling model for online regulation

NASA Astrophysics Data System (ADS)

Cao, Trong-Son

2017-10-01

Roll-bite model is employed to predict the rolling force, torque as well as to estimate the forward slip for preset or online regulation at industrial rolling mills. The rolling process is often dissymmetric in terms of work-rolls rotation speeds and diameters as well as the friction conditions at upper and lower contact surfaces between work-rolls and the strip. The roll-bite model thus must be able to account for these dissymmetries and in the same time has to be accurate and fast enough for online applications. In the present study, a new method, namely Adapted Discretization Slab Method (ADSM) is proposed to obtain a robust roll-bite model, which can take into account the aforementioned dissymmetries and has a very short response time, lower than one millisecond. This model is based on the slab method, with an adaptive discretization and a global Newton-Raphson procedure to improve the convergence speed. The model was validated by comparing with other dissymmetric models proposed in the literature, as well as Finite Element simulations and industrial pilot trials. Furthermore, back-calculation tool was also constructed for friction management for both offline and online applications. With very short CPU time, the ADSM-based model is thus attractive for all online applications, both for cold and hot rolling.

Materials Engineering by Ameloblasts

PubMed Central

2015-01-01

Enamel is unique. It is the only epithelial-derived mineralized tissue in mammals and has a distinct micro- and nanostructure with nanofibrous apatite crystals as building blocks. It is synthesized by a highly specialized cell, the ameloblast, which secretes matrix proteins with little homology to any other known amino acid sequence, but which is composed of a primary structure that makes it competent to self-assemble and control apatite crystal growth at the nanometer scale. The end-product of ameloblast activity is a marvel of structural engineering: a material optimized to provide the tooth with maximum biting force, withstanding millions of cycles of loads without catastrophic failure, while also protecting the dental pulp from bacterial attack. This review attempts to bring into context the mechanical behavior of enamel with the developmental process of amelogenesis and structural development, since they are linked to tissue function, and the importance of controlling calcium phosphate mineralization at the nanometer scale. The origins of apatite nanofibers, the development of a stiffness gradient, and the biological processes responsible for the synthesis of a hard and fracture-resistant dental tissue are discussed with reference to the evolution of enamel from a fibrous composite to a complex, tough, and damage-tolerant coating on dentin. PMID:25800708

JPRS Report, Soviet Union, Political Affairs

DTIC Science & Technology

1989-07-27

member of a committee for investigating personal affairs, without verbal affectation : "Better that I buy a bottle of vodka or bite of sausage with...schlock—Indian junk, "Bingo- Bongo ." saccharin melodramas, and simi- lar nonsense. We currently are standing up for our principles and are attempting...tion conditions force the movie theaters to give prece- dence to "Bingo- Bongo ." Finally, we must confess, the system governing our relations

New fossils from Tadkeshwar Mine (Gujarat, India) increase primate diversity from the early Eocene Cambay Shale.

PubMed

Rose, Kenneth D; Dunn, Rachel H; Kumar, Kishor; Perry, Jonathan M G; Prufrock, Kristen A; Rana, Rajendra S; Smith, Thierry

2018-06-07

Several new fossil specimens from the Cambay Shale Formation at Tadkeshwar Lignite Mine in Gujarat document the presence of two previously unknown early Eocene primate species from India. A new species of Asiadapis is named based on a jaw fragment preserving premolars similar in morphology to those of A. cambayensis but substantially larger. Also described is an exceptionally preserved edentulous dentary (designated cf. Asiadapis, unnamed sp. nov.) that is slightly larger and much more robust than previously known Cambay Shale primates. Its anatomy most closely resembles that of Eocene adapoids, and the dental formula is the same as in A. cambayensis. A femur and calcaneus are tentatively allocated to the same taxon. Although the dentition is unknown, exquisite preservation of the dentary of cf. Asiadapis sp. nov. enables an assessment of masticatory musculature, function, and gape adaptations, as well as comparison with an equally well-preserved dentary of the asiadapid Marcgodinotius indicus, also from Tadkeshwar. The new M. indicus specimen shows significant gape adaptations but was probably capable of only weak bite force, whereas cf. Asiadapis sp. nov. probably used relatively smaller gapes but could generate relatively greater bite forces. Copyright © 2018 Elsevier Ltd. All rights reserved.

Dietary hardness, loading behavior, and the evolution of skull form in bats.

PubMed

Santana, Sharlene E; Grosse, Ian R; Dumont, Elizabeth R

2012-08-01

The morphology and biomechanics of the vertebrate skull reflect the physical properties of diet and behaviors used in food acquisition and processing. We use phyllostomid bats, the most diverse mammalian dietary radiation, to investigate if and how changes in dietary hardness and loading behaviors during feeding shaped the evolution of skull morphology and biomechanics. When selective regimes of food hardness are modeled, we found that species consuming harder foods have evolved skull shapes that allow for more efficient bite force production. These species have shorter skulls and a greater reliance on the temporalis muscle, both of which contribute to a higher mechanical advantage at an intermediate gape angle. The evolution of cranial morphology and biomechanics also appears to be related to loading behaviors. Evolutionary changes in skull shape and the relative role of the temporalis and masseter in generating bite force are correlated with changes in the use of torsional and bending loading behaviors. Functional equivalence appears to have evolved independently among three lineages of species that feed on liquids and are not obviously morphologically similar. These trends in cranial morphology and biomechanics provide insights into behavioral and ecological factors shaping the skull of a trophically diverse clade of mammals. © 2012 The Author(s). Evolution© 2012 The Society for the Study of Evolution.

Cranial biomechanics underpins high sauropod diversity in resource-poor environments

PubMed Central

Button, David J.; Rayfield, Emily J.; Barrett, Paul M.

2014-01-01

High megaherbivore species richness is documented in both fossil and contemporary ecosystems despite their high individual energy requirements. An extreme example of this is the Late Jurassic Morrison Formation, which was dominated by sauropod dinosaurs, the largest known terrestrial vertebrates. High sauropod diversity within the resource-limited Morrison is paradoxical, but might be explicable through sophisticated resource partitioning. This hypothesis was tested through finite-element analysis of the crania of the Morrison taxa Camarasaurus and Diplodocus. Results demonstrate divergent specialization, with Camarasaurus capable of exerting and accommodating greater bite forces than Diplodocus, permitting consumption of harder food items. Analysis of craniodental biomechanical characters taken from 35 sauropod taxa demonstrates a functional dichotomy in terms of bite force, cranial robustness and occlusal relationships yielding two polyphyletic functional ‘grades’. Morrison taxa are widely distributed within and between these two morphotypes, reflecting distinctive foraging specializations that formed a biomechanical basis for niche partitioning between them. This partitioning, coupled with benefits associated with large body size, would have enabled the high sauropod diversities present in the Morrison Formation. Further, this provides insight into the mechanisms responsible for supporting the high diversities of large megaherbivores observed in other Mesozoic and Cenozoic communities, particularly those occurring in resource-limited environments. PMID:25297869

Cranial mechanics and feeding in Tyrannosaurus rex.

PubMed

Rayfield, Emily J

2004-07-22

It has been suggested that the large theropod dinosaur Tyrannosaurus rex was capable of producing extremely powerful bite forces and resisting multi-directional loading generated during feeding. Contrary to this suggestion is the observation that the cranium is composed of often loosely articulated facial bones, although these bones may have performed a shock-absorption role. The structural analysis technique finite element analysis (FEA) is employed here to investigate the functional morphology and cranial mechanics of the T. rex skull. In particular, I test whether the skull is optimized for the resistance of large bi-directional feeding loads, whether mobile joints are adapted for the localized resistance of feeding-induced stress and strain, and whether mobile joints act to weaken or strengthen the skull overall. The results demonstrate that the cranium is equally adapted to resist biting or tearing forces and therefore the 'puncture-pull' feeding hypothesis is well supported. Finite-element-generated stress-strain patterns are consistent with T. rex cranial morphology: the maxilla-jugal suture provides a tensile shock-absorbing function that reduces localized tension yet 'weakens' the skull overall. Furthermore, peak compressive and shear stresses localize in the nasals rather than the fronto-parietal region as seen in Allosaurus, offering a reason why robusticity is commonplace in tyrannosaurid nasals. Copyright 2004 The Royal Society

Cranial mechanics and feeding in Tyrannosaurus rex.

PubMed Central

Rayfield, Emily J.

2004-01-01

It has been suggested that the large theropod dinosaur Tyrannosaurus rex was capable of producing extremely powerful bite forces and resisting multi-directional loading generated during feeding. Contrary to this suggestion is the observation that the cranium is composed of often loosely articulated facial bones, although these bones may have performed a shock-absorption role. The structural analysis technique finite element analysis (FEA) is employed here to investigate the functional morphology and cranial mechanics of the T. rex skull. In particular, I test whether the skull is optimized for the resistance of large bi-directional feeding loads, whether mobile joints are adapted for the localized resistance of feeding-induced stress and strain, and whether mobile joints act to weaken or strengthen the skull overall. The results demonstrate that the cranium is equally adapted to resist biting or tearing forces and therefore the 'puncture-pull' feeding hypothesis is well supported. Finite-element-generated stress-strain patterns are consistent with T. rex cranial morphology: the maxilla-jugal suture provides a tensile shock-absorbing function that reduces localized tension yet 'weakens' the skull overall. Furthermore, peak compressive and shear stresses localize in the nasals rather than the fronto-parietal region as seen in Allosaurus, offering a reason why robusticity is commonplace in tyrannosaurid nasals. PMID:15306316

Monkey bites among US military members, Afghanistan, 2011.

PubMed

Mease, Luke E; Baker, Katheryn A

2012-10-01

Bites from Macaca mulatta monkeys, native to Afghanistan, can cause serious infections. To determine risk for US military members in Afghanistan, we reviewed records for September-December 2011. Among 126 animal bites and exposures, 10 were monkey bites. Command emphasis is vital for preventing monkey bites; provider training and bite reporting promote postexposure treatment.

Effect of ebastine on mosquito bites.

PubMed

Reunala, T; Brummer-Korvenkontio, H; Petman, L; Palosuo, T; Sarna, S

1997-07-01

Mosquito bites usually cause wealing and delayed bite papules. Cetirizine decreases wealing, bite papules and pruritus but the effect of other antihistamines on mosquito bites is unknown. We studied the effect of ebastine in 30 mosquito bite-sensitive adult subjects. Ebastine 10 mg or 20 mg and placebo were given for 4 days in a cross-over fashion. Aedes aegypti bites were given on forearms. The size of the bite lesions and pruritus (visual analogue score) were measured at 15 min, 2, 6, and 24 h after the bites. Twenty-five subjects were evaluable in the study. At 15 min ebastine decreased significantly the size of the bite lesion (p = 0.0017) and pruritus (p<0.0001). The effects of 10 mg and 20 mg of ebastine were similar. No significant effect was found at 2, 6 or 24 h, but when the measurements at all four time points were compiled the size of the bite lesion and pruritus score decreased significantly. Sedation occurred during ebastine treatment in 6 (21%) and during placebo treatment in 2 (7%) subjects. The present results show that prophylactically given ebastine is effective against immediate mosquito bite symptoms.

Analysis of force profile during a maximum voluntary isometric contraction task.

PubMed

Househam, Elizabeth; McAuley, John; Charles, Thompson; Lightfoot, Timothy; Swash, Michael

2004-03-01

This study analyses maximum voluntary isometric contraction (MVIC) and its measurement by recording the force profile during maximal-effort, 7-s hand-grip contractions. Six healthy subjects each performed three trials repeated at short intervals to study variation from fatigue. These three trials were performed during three separate sessions at daily intervals to look at random variation. A pattern of force development during a trial was identified. An initiation phase, with or without an initiation peak, was followed by a maintenance phase, sometimes with secondary pulses and an underlying decline in force. Of these three MVIC parameters, maximum force during the maintenance phase showed less random variability compared to intertrial fatigue variability than did maximum force during the initiation phase or absolute maximum force. Analysis of MVIC as a task, rather than a single, maximal value reveals deeper levels of motor control in its generation. Thus, force parameters other than the absolute maximum force may be better suited to quantification of muscle performance in health and disease.

Factors Associated with Tick Bite Preventive Practices among Farmworkers in Malaysia

PubMed Central

Wong, Li Ping; Tay, Sun Tee; Bulgiba, Awang; Zandi, Keivan; Kho, Kai Ling; Koh, Fui Xian; Ong, Bee Lee; Jaafar, Tariq; Hassan Nizam, Quaza Nizamuddin

2016-01-01

Background Farmworkers are at high-risk for tick bites, which potentially transmit various tick-borne diseases. Previous studies show that personal prevention against tick bites is key, and certain factors namely, knowledge, experience of tick bites, and health beliefs influence compliance with tick bites preventive behaviour. This study aimed to assess these factors and their associations with tick bite preventive practices among Malaysian farmworkers. Methods A total of eight cattle, goat and sheep farms in six states in Peninsular Malaysia participated in a cross-sectional survey between August and October 2013 Results A total of 151 (72.2%) out of 209 farmworkers answered the questionnaire. More than half of the farmworkers (n = 91) reported an experience of tick bites. Farms with monthly acaricide treatment had significantly (P<0.05) a low report of tick bites. Tick bite exposure rates did not differ significantly among field workers and administrative workers. The mean total knowledge score of ticks for the overall farmworkers was 13.6 (SD±3.2) from 20. The mean total tick bite preventive practices score for all farmworkers was 8.3 (SD±3.1) from 15. Fixed effect model showed the effects of four factors on tick bite prevention: (1) farms, (2) job categories (administrative workers vs. field workers), (3) perceived severity of tick bites, and (4) perceived barriers to tick bite prevention. Conclusions A high proportion of farmworkers, including administrative workers, reported an experience of tick bites. The effectiveness of monthly acaricide treatment was declared by low reports of tick bites on these farms. Tick bite preventive practices were insufficient, particularly in certain farms and for administrative workers. Our findings emphasise the need to have education programmes for all farmworkers and targeting farms with low prevention practices. Education and health programmes should increase the perception of the risk of tick bites and remove perceived barriers of tick bite prevention. PMID:27341678

The effect of impression volume and double-arch trays on the registration of maximum intercuspation.

PubMed

Hahn, Sara M; Millstein, Philip L; Kinnunen, Taru H; Wright, Robert F

2009-12-01

The type of double-arch trays used may affect occlusion. The purpose of this study was to determine what effect, if any, double-arch tray design and impression material volume had on the registration of maximum intercuspation (MI). Quadrant impressions were made on articulated fracture-resistant dental casts mounted in maximum intercuspation occlusion. Three types of sideless double-arch impression trays were used: First Bite with nylon webbing, Sultan's 3-Way with double crosshatch webbing, and Premium's 3-in-1 Tray with single crosshatch webbing. Vinyl polysiloxane impression material (Aquasil Ultra Rigid Fast Set) was distributed at 2 different volumes (5.4 ml and 8.3 ml), and 60 impressions were made (n=10). A weight of 1.2 kg was placed on the upper arm of an Artex articulator, ensuring complete closure. The impressions were allowed to polymerize for 5 minutes. After polymerization, specimens were placed on a light box, and a camera set at a fixed distance was used to capture the light transmission that was projected through the impression material. The camera transferred the information to an image analysis program (ImageJ). This system allowed the different amounts of light projected through the impression to be translated into a gray scale value (GSV), which was assigned a thickness value, in millimeters, of a specified occlusal contact area. To assess reliability of the experimental design, 10 control impressions were made by directly applying impression material onto the typodont. These were analyzed in the same manner as the impressions made with trays. A 2-way ANOVA comparing volume by tray type was used (alpha=.05). This was followed by a Tukey HSD test. There was no main effect for volume of impression material (P=.71). Tray type was significantly different (P<.001). Impressions made with Sultan trays were significantly less accurate than impressions made with First Bite or Premium impression trays. The Premium tray type had the highest mean (SD) GSV, 179.8 (8.1), significantly higher than First Bite (164.7 (19.8); P<.001) or Sultan (82.8 (7.4); P<.001) trays. This in vitro study demonstrated that certain trays hinder closure into MI, which may negatively affect the accuracy of record making.

Human Bites in the Classroom: Incidence, Treatment, and Complications

ERIC Educational Resources Information Center

Conlon, Helen Acree

2007-01-01

It has been estimated that at least one half of the population will experience some type of bite in their lifetime. Human bites are the third leading cause of all bites seen in hospital emergency departments after dog and cat bites. Human bites can be the source of exposure to body fluids, transmission of communicable diseases, infections ranging…

Monkey Bites among US Military Members, Afghanistan, 2011

PubMed Central

Baker, Katheryn A.

2012-01-01

Bites from Macaca mulatta monkeys, native to Afghanistan, can cause serious infections. To determine risk for US military members in Afghanistan, we reviewed records for September–December 2011. Among 126 animal bites and exposures, 10 were monkey bites. Command emphasis is vital for preventing monkey bites; provider training and bite reporting promote postexposure treatment. PMID:23017939

Dog bite injuries to humans and the use of breed-specific legislation: a comparison of bites from legislated and non-legislated dog breeds.

PubMed

Creedon, Nanci; Ó'Súilleabháin, Páraic S

2017-01-01

The primary objective of this study was to investigate if differences in dog bite characteristics exist amongst legislated and non-legislated dog breeds listed under breed-specific legislation in Ireland (age when bitten, anatomical bite locations, triggers for biting, victim's relationship with the dog, geographical location and owner presence, history of aggression, reporting bite incident to authorities, medical treatment required following the bite, and type of bite inflicted). A second objective of the current study was to investigate dog control officer's enforcement and perceptions of current legislation. Data for statistical analyses were collated through a nationally advertised survey, with Pearson Chi-square and Fisher's Exact Test statistical methods employed for analyses. A total of 140 incident surveys were assessed comprising of non-legislated ( n  = 100) and legislated ( n  = 40) dog bite incidents. Legislated breeds were significantly more likely to be perceived as aggressive and less fearful as triggers for biting compared to non-legislated breeds ( P  = 0.003). Non-legislated breeds were more likely to inflict a bite with the owner present on own property and on a business premises compared to legislated breeds ( P  = 0.036). Non-legislated breeds were more likely to not be reported to the authorities before ( P  = 0.009), and after ( P  = 0.032) the bite occurred compared to legislated breeds. There were no significant differences observed between both groups for; age when the victim was bitten, bite location, relationship with the dog, history of aggression, outcome for the dog, if the dog bit again, and seeing a professional trainer or behaviourist. No significant difference was observed between both legislated and non-legislated groups for medical treatment required following the bite, and the type of bite inflicted. The present study results did not observe evidence of any differences between legislated and non-legislated for both the medical treatment to victims required following the bite, and the type of bite inflicted. The significant differences in bites being reported to authorities, perceived triggers for biting, and biting locations suggests distinctly differing perceptions relating to risk between legislated and non-legislated dog breeds. Further consequences relating to the introduction of breed-specific legislation in Ireland are discussed.

Descriptive epidemiology of animal bites in Indiana, 1990-92--a rationale for intervention.

PubMed Central

Sinclair, C L; Zhou, C

1995-01-01

Animal bites are a reality of life throughout the world. They arise out of an imperfect relationship with domestic animals and wildlife. Most bite injuries are preventable. The principal approaches to community-wide bite prevention programs include reducing the number of domestic animals roaming in the community (animal control) and teaching people to refrain from behaviors likely to provoke bites. This article addresses the epidemiologic basis and justification for a bite prevention program targeted toward children. Animal bite data from Indiana for the years 1990, 1991, and 1992 were analyzed for trends that might suggest opportunities for preventive intervention. Bites inflicted by humans were not included in this data base. Children of all age groups were disproportionately affected, with the highest incidence in the 5-9 year age group. The dog and the cat were the most commonly reported biting animals. Wild and pet rodents were the next most frequent biting group. The bites most frequently reported from nonrodent wild animals were inflicted by raccoons. The incidence of animal bites in children peaked during the spring (April-June). Boys were bitten at a higher rate than girls, but this difference between the sexes narrows with age and was not noted in the adult population. Residents of urban counties (population greater than 100,000) had higher reported bite rates than residents of nonurban counties. PMID:7838946

Make-up and love bites: two reports about exceptional cases of self-inflicted "injuries".

PubMed

Blaas, Verena; Manhart, Johannes; Büttner, Andreas

2016-12-01

Self-inflicted injuries and their differentiation from inflicted injuries may have severe legal implications. The detection of these injuries is an important task in clinical forensic medicine. We present two cases of skin discolorations caused by using make-up and suction of the skin which have only rarely been reported. In the first case a 19-year-old woman asserted she was punched against her left clavicle and her right eye by a perpetrator, and that during the following forced sexual intercourse she had been bitten on the neck. On medicolegal examination 3 days later dark blue, shimmering discolorations at her right eyebrow, the left side of the neck and the left clavicle were seen. At first sight these discolorations appeared as bruises; however, they could easily be removed by a simple wipe with a finger. In the second reported case a 23-year-old woman reported she had been assaulted by two men who forcefully pressed her against a wall, partially undressed her and forced her to touch and rub one man's penis. Medicolegal examination 32 h after the incident revealed several round to oval shaped, reddish to brown discolorations on both of her upper arms resembling so-called love bites created by suction. In both cases the preliminary investigation by the public prosecutor were closed. However, case 1 is still subject to legal investigations due to false incrimination. Self-infliction of injuries should always be considered in forensic examinations, even if they do not follow the classical pattern.

Bite force estimation and the fiber architecture of felid masticatory muscles.

PubMed

Hartstone-Rose, Adam; Perry, Jonathan M G; Morrow, Caroline J

2012-08-01

Increasingly, analyses of craniodental dietary adaptations take into account mechanical properties of foods. However, masticatory muscle fiber architecture has been described for relatively few lineages, even though an understanding of the scaling of this anatomy can yield important information about adaptations for stretch and strength in the masticatory system. Data on the mandibular adductors of 28 specimens from nine species of felids representing nearly the entire body size range of the family allow us to evaluate the influence of body size and diet on the masticatory apparatus within this lineage. Masticatory muscle masses scale isometrically, tending toward positive allometry, with body mass and jaw length. This allometry becomes significant when the independent variable is a geometric mean of cranial variables. For all three body size proxies, the physiological cross-sectional area and predicted bite forces scale with significant positive allometry. Average fiber lengths (FL) tend toward negative allometry though with wide confidence intervals resulting from substantial scatter. We believe that these FL residuals are affected by dietary signals within the sample; though the mechanical properties of felid diets are relatively similar across species, the most durophagous species in our sample (the jaguar) appears to have relatively higher force production capabilities. The more notable dietary trend in our sample is the relationship between FL and relative prey size: felid species that predominantly consume relatively small prey have short masticatory muscle fibers, and species that regularly consume relatively large prey have relatively long fibers. This suggests an adaptive signal related to gape. Copyright © 2012 Wiley Periodicals, Inc.

Seasonal Variation in Biting Rates of Simulium damnosum sensu lato, Vector of Onchocerca volvulus, in Two Sudanese Foci

PubMed Central

Zarroug, Isam M. A.; Hashim, Kamal; Elaagip, Arwa H.; Samy, Abdallah M.; Frah, Ehab A.; ElMubarak, Wigdan A.; Mohamed, Hanan A.; Deran, Tong Chor M.; Aziz, Nabil; Higazi, Tarig B.

2016-01-01

Background The abundance of onchocerciasis vectors affects the epidemiology of disease in Sudan, therefore, studies of vector dynamics are crucial for onchocerciasis control/elimination programs. This study aims to compare the relative abundance, monthly biting-rates (MBR) and hourly-based distribution of onchocerciasis vectors in Abu-Hamed and Galabat foci. These seasonally-based factors can be used to structure vector control efforts to reduce fly-biting rates as a component of onchocerciasis elimination programs. Methods A cross-sectional study was conducted in four endemic villages in Abu-Hamed and Galabat foci during two non-consecutive years (2007–2008 and 2009–2010). Both adults and aquatic stages of the potential onchocerciasis vector Simulium damnosum sensu lato were collected following standard procedures during wet and dry seasons. Adult flies were collected using human landing capture for 5 days/month. The data was recorded on handheld data collection sheets to calculate the relative abundance, MBR, and hourly-based distribution associated with climatic factors. The data analysis was carried out using ANOVA and Spearman rank correlation tests. Results Data on vector surveillance revealed higher relative abundance of S. damnosum s.l. in Abu- Hamed (39,934 flies) than Galabat (8,202 flies). In Abu-Hamed, vector populations increased in January-April then declined in June-July until they disappeared in August-October. Highest black fly density and MBR were found in March 2007 (N = 9,444, MBR = 58,552.8 bites/person/month), and March 2010 (N = 2,603, MBR = 16,138.6 bites/person/month) while none of flies were collected in August-October (MBR = 0 bites/person/month). In Galabat, vectors increased in September-December, then decreased in February-June. The highest vector density and MBR were recorded in September 2007 (N = 1,138, MBR = 6,828 bites/person/month) and September 2010 (N = 1,163, MBR = 6,978 bites/person/month), whereas, none appeared in collection from April to June. There was a significant difference in mean monthly density of S. damnosum s.l. across the two foci in 2007–2008 (df = 3, F = 3.91, P = 0.011). Minimum temperature showed significant correlation with adult flies counts in four areas sampled; the adult counts were increased in Nady village (rs = 0.799) and were decreased in Kalasecal (rs = - 0.676), Gumaiza (rs = - 0.585), and Hilat Khateir (rs = - 0.496). Maximum temperature showed positive correlation with black fly counts only in Galabat focus. Precipitation was significantly correlated with adult flies counts in Nady village, Abu-Hamed, but no significance was found in the rest of the sampled villages in both foci. Hourly-based distribution of black flies showed a unimodal pattern in Abu-Hamed with one peak (10:00–18:00), while a bimodal pattern with two peaks (07:00–10:00) and (14:00–18:00) was exhibited in Galabat. Conclusion Transmission of onchocerciasis in both foci showed marked differences in seasonality, which may be attributed to ecology, microclimate and proximity of breeding sites to collection sites. The seasonal shifts between the two foci might be related to variations in climate zones. This information on black fly vector seasonality, ecology, distribution and biting activity has obvious implications in monitoring transmission levels to guide the national and regional onchocerciasis elimination programs in Sudan. PMID:26943668

Automated Test Requirement Document Generation

DTIC Science & Technology

1987-11-01

DIAGNOSTICS BASED ON THE PRINCIPLES OF ARTIFICIAL INTELIGENCE ", 1984 International Test Conference, 01Oct84, (A3, 3, Cs D3, E2, G2, H2, 13, J6, K) 425...j0O GLOSSARY OF ACRONYMS 0 ABBREVIATION DEFINITION AFSATCOM Air Force Satellite Communication Al Artificial Intelligence ASIC Application Specific...In-Test Equipment (BITE) and AI ( Artificial Intelligence) - Expert Systems - need to be fully applied before a completely automated process can be

What doesn't kill you might make you stronger: functional basis for variation in body armour.

PubMed

Broeckhoven, Chris; Diedericks, Genevieve; Mouton, P le Fras N

2015-09-01

1. Predation has been proposed to be a selective agent in the evolution of morphological antipredator strategies in prey. Among vertebrates, one of the morphological traits that evolved multiple times is body armour, including carapaces, thickened keratinized scales and plates of dermal bone. 2. It has been generally assumed that body armour provides protection against a predatory attack; yet, few explicit tests of the hypothesis exist. Cordylidae, a relatively small family of southern African lizards, show considerable variation in the degree of body armour. Hence, this family provides an opportunity to test the hypothesis that body armour serves as protection against predators. 3. Experiments were conducted to test whether the bite forces of four species of mammalian predators were high enough to penetrate the skins of Karusasaurus polyzonus, Namazonurus peersi, Cordylus cordylus and Cordylus macropholis, as well as those of Ouroborus cataphractus individuals originating from three localities that differed in their predator diversity. Furthermore, histological techniques were used to test whether variation in skin toughness was associated with concomitant changes in the degree of epidermal (i.e. β-keratin) and dermal (i.e. osteoderm) armour. 4. The skin toughness values for four out of five cordylid lizards tested in this study were well below the bite forces of the mammalian predators. In contrast, the thick osteoderms in the dermis of O. cataphractus can withstand bites from several mongoose species. However, the significant variation in body armour that is present between the three populations of O. cataphractus does not seem to be related to predator diversity. 5. It is concluded that body armour can serve as protection against predation in O. cataphractus, but that alternative selection pressures, such as thermoregulation or predation by snakes, presumably underlie variation in defensive morphology in the other cordylid lizards. © 2015 The Authors. Journal of Animal Ecology © 2015 British Ecological Society.

Dog bites in a U.S. county: age, body part and breed in paediatric dog bites.

PubMed

Ramgopal, Sriram; Brungo, Lauren Bealafeld; Bykowski, Michael R; Pitetti, Raymond D; Hickey, Robert W

2018-05-01

To compare characteristics of gender, age, body part and breed in dog bites. We reviewed 14 956 dog bites (4195 paediatric) reported to the Allegheny County Health Department, USA, between 2007 and 2015. Using predefined age groups, we performed linear regression to assess for subject age and bite frequency and used binary logistic regression to evaluate for differences in gender and body part. We used chi-squared test with Bonferroni correction to evaluate for differences in reported breeds with age. There was a negative correlation (-0.80, r 2 = 0.64) between age and bite frequency. Children 0-3 years had a higher odds ratio (OR) of bites to the face [21.12, 95% confidence interval (CI): 17.61-25.33] and a lower OR of bites to the upper (OR: 0.14, 95% CI: 0.12-0.18) and lower (OR: 0.19, 95% CI: 0.14-0.27) extremities. 'Pit bulls' accounted for 27.2% of dog bites and were more common in children 13-18 years (p < 0.01). Shih-Tzu bites were more common in children three years of age and younger (p < 0.01). Dog bites occur with higher frequency at younger ages, and head and neck injuries are more common in younger children. Pit bull bites are more common in adolescents and Shih-Tzu bites more common in younger children. ©2018 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Effects of Bite Count Feedback from a Wearable Device and Goal Setting on Consumption in Young Adults.

PubMed

Jasper, Phillip W; James, Melva T; Hoover, Adam W; Muth, Eric R

2016-11-01

New technologies are emerging that may help individuals engage in healthier eating behaviors. One paradigm to test the efficacy of a technology is to determine its effect relative to environment cues that are known to cause individuals to overeat. The purpose of this work was to independently investigate two questions: How does the presence of a technology that provides bite count feedback alter eating behavior? and, How does the presence of a technology that provides bite count feedback paired with a goal alter eating behavior? Two studies investigated these research questions. The first study tested the effects of a large and small plate crossed with the presence or absence of a device that provided bite count feedback on intake. The second study tested the effects of a bite count goal with bite count feedback, again crossed with plate size, on intake. Both studies used a 2×2 between-subjects design. In the first study, 94 subjects (62 women aged 19.0±1.6 years with body mass index [BMI] 23.04±3.6) consumed lunch in a laboratory. The second study examined 99 subjects (56 women aged 18.5±1.5 years with BMI 22.73±2.70) under the same conditions. In both studies subjects consumed a single-course meal, using either a small or large plate. In the first study participants either wore or did not wear an automated bite counting device. In the second study all participants wore the bite counting device and were given either a low bite count goal (12 bites) or a high bite count goal (22 bites). Effect of plate size, feedback, and goal on consumption (grams) and number of bites taken were assessed using 2×2 analyses of variance. As adjunct measures, the effects of serving size, bite size (grams per bite), postmeal satiety, and satiety change were also assessed. In the first study there was a main effect of plate size on grams consumed and number of bites taken such that eating from a large plate led to greater consumption (P=0.001) and a greater number of bites (P=0.001). There was also a main effect of feedback on consumption and number of bites taken such that those who received feedback consumed less (P=0.011) and took fewer bites (P<0.001). In the second study there was a main effect of plate size on consumption such that those eating from a large plate consumed more (P=0.003) but did not take more bites. Further analysis revealed a main effect of goal on number of bites taken such that those who received the low goal took fewer bites (P<0.001) but did not consume less. Providing feedback on the number of bites taken from a wearable intake monitor can reduce overall intake during a single meal. Regarding the first research question, providing feedback significantly reduced intake in both plate size groups and reduced the overall number of bites taken. Regarding the second research question, participants were successful in eating to their goals. However, individuals in the low goal condition appeared to compensate for the restricted goal by taking larger bites, leading to comparable levels of consumption between the low and high goal groups. Hence, the interaction of technology with goals should be considered when introducing a health intervention. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

The biomechanical effects of variation in the maximum forces exerted by trunk muscles on the joint forces and moments in the lumbar spine: a finite element analysis.

PubMed

Kim, K; Lee, S K; Kim, Y H

2010-10-01

The weakening of trunk muscles is known to be related to a reduction of the stabilization function provided by the muscles to the lumbar spine; therefore, strengthening deep muscles might reduce the possibility of injury and pain in the lumbar spine. In this study, the effect of variation in maximum forces of trunk muscles on the joint forces and moments in the lumbar spine was investigated. Accordingly, a three-dimensional finite element model of the lumbar spine that included the trunk muscles was used in this study. The variation in maximum forces of specific muscle groups was then modelled, and joint compressive and shear forces, as well as resultant joint moments, which were presumed to be related to spinal stabilization from a mechanical viewpoint, were analysed. The increase in resultant joint moments occurred owing to decrease in maximum forces of the multifidus, interspinales, intertransversarii, rotatores, iliocostalis, longissimus, psoas, and quadratus lumborum. In addition, joint shear forces and resultant joint moments were reduced as the maximum forces of deep muscles were increased. These results from finite element analysis indicate that the variation in maximum forces exerted by trunk muscles could affect the joint forces and joint moments in the lumbar spine.

Describing the Relationship between Cat Bites and Human Depression Using Data from an Electronic Health Record

PubMed Central

Hanauer, David A.; Ramakrishnan, Naren; Seyfried, Lisa S.

2013-01-01

Data mining approaches have been increasingly applied to the electronic health record and have led to the discovery of numerous clinical associations. Recent data mining studies have suggested a potential association between cat bites and human depression. To explore this possible association in more detail we first used administrative diagnosis codes to identify patients with either depression or bites, drawn from a population of 1.3 million patients. We then conducted a manual chart review in the electronic health record of all patients with a code for a bite to accurately determine which were from cats or dogs. Overall there were 750 patients with cat bites, 1,108 with dog bites, and approximately 117,000 patients with depression. Depression was found in 41.3% of patients with cat bites and 28.7% of those with dog bites. Furthermore, 85.5% of those with both cat bites and depression were women, compared to 64.5% of those with dog bites and depression. The probability of a woman being diagnosed with depression at some point in her life if she presented to our health system with a cat bite was 47.0%, compared to 24.2% of men presenting with a similar bite. The high proportion of depression in patients who had cat bites, especially among women, suggests that screening for depression could be appropriate in patients who present to a clinical provider with a cat bite. Additionally, while no causative link is known to explain this association, there is growing evidence to suggest that the relationship between cats and human mental illness, such as depression, warrants further investigation. PMID:23936453

Bacteria isolated from conspecific bite wounds in Norway and black rats: implications for rat bite-associated infections in people.

PubMed

Himsworth, Chelsea G; Zabek, Erin; Tang, Patrick; Parsons, Kirbee L; Koehn, Martha; Jardine, Claire M; Patrick, David M

2014-02-01

Bites associated with wild and domestic Norway and black rats (Rattus norvegicus and Rattus rattus) may have a variety of health consequences in people. Bite-related infections are among the most significant of these consequences; however, there is little data on the infectious agents that can be transmitted from rats to people through biting. This is problematic because without an accurate understanding of bite-related infection risks, it is difficult for health professionals to evaluate the adequacy of existing guidelines for empirical therapy. The objectives of this study were to increase our knowledge of the bacterial species associated with rat bites by studying bite wounds that wild rats inflict upon one another and to review the literature regarding rat bites and bite wound management. Wild Norway and black rats (n=725) were trapped in Vancouver, Canada, and examined for bite wounds in the skin. All apparently infected wounds underwent aerobic and anaerobic culture, and isolated bacteria were identified. Thirty-six rats had bite wound-related infections, and approximately 22 different species of bacteria belonging to 18 genera were identified. Staphylococcus aureus was the most common isolate; however, the majority of infections (72.5%) were polymicrobial. Rat bites can result in infection with a number of aerobic and anaerobic Gram-positive and Gram-negative bacteria. In humans, these wounds are best managed through early recognition and cleansing. The benefit of prophylactic antimicrobial treatment is debatable, but given the deep puncturing nature of rodent bites, we suggest that they should be considered a high risk for infection. Antibiotics selected should include coverage for a broad range of bacterial species.

Annual incidence of snake bite in rural bangladesh.

PubMed

Rahman, Ridwanur; Faiz, M Abul; Selim, Shahjada; Rahman, Bayzidur; Basher, Ariful; Jones, Alison; d'Este, Catherine; Hossain, Moazzem; Islam, Ziaul; Ahmed, Habib; Milton, Abul Hasnat

2010-10-26

Snake bite is a neglected public health problem in the world and one of the major causes of mortality and morbidity in many areas, particularly in the rural tropics. It also poses substantial economic burdens on the snake bite victims due to treatment related expenditure and loss of productivity. An accurate estimate of the risk of snake bite is largely unknown for most countries in the developing world, especially South-East Asia. We undertook a national epidemiological survey to determine the annual incidence density of snake bite among the rural Bangladeshi population. Information on frequency of snake bite and individuals' length of stay in selected households over the preceding twelve months was rigorously collected from the respondents through an interviewer administered questionnaire. Point estimates and confidence intervals of the incidence density of snake bite, weighted and adjusted for the multi-stage cluster sampling design, were obtained. Out of 18,857 study participants, over one year a total of 98 snake bites, including one death were reported in rural Bangladesh. The estimated incidence density of snake bite is 623.4/100,000 person years (95% C I 513.4-789.2/100,000 person years). Biting occurs mostly when individuals are at work. The majority of the victims (71%) receive snake bites to their lower extremities. Eighty-six percent of the victims received some form of management within two hours of snake bite, although only three percent of the victims went directly to either a medical doctor or a hospital. Incidence density of snake bite in rural Bangladesh is substantially higher than previously estimated. This is likely due to better ascertainment of the incidence through a population based survey. Poor access to health services increases snake bite related morbidity and mortality; therefore, effective public health actions are warranted.

A placebo controlled clinical trial investigating the efficacy of a homeopathic after-bite gel in reducing mosquito bite induced erythema.

PubMed

Hill, N; Stam, C; Tuinder, S; van Haselen, R A

1995-01-01

A randomised, placebo controlled clinical trial was conducted to examine the efficacy of a homeopathic after-bite gel in the symptomatic relief of mosquito bites. Sixty eight healthy volunteers were bitten under laboratory conditions by Aedes aegypti mosquitoes at three spots, on the ventral aspect of the forearm. One bite was treated with the homeopathic after-bite gel, another bite with a placebo gel which was identical in appearance and smell to the homeopathic after-bite gel, and the third bite remained untreated. Immediately after the bites and 1, 3, 6, 26 and 31 hours post-bite, the length and width of the erythema were measured with a calliper, and photographs were taken of the bite sites from which the size of the erythema was subsequently determined. This was followed by assessment of the extent of itching with a verbal analogue scale, and finally treatment took place. For each spot the total erythema was calculated as the area under the plotted curve of the erythema at different time points (mm2*h) and the total sum of the itch scores was determined. For the bites treated with the homeopathic after-bite gel the median total erythema was 10.500 mm2*h. For the spots treated with the placebo gel and the untreated spots the median total erythema was 12.900 mm2*h and 13.300 mm2*h, respectively. The difference between the spots treated with the homeopathic after-bite gel and the untreated spots came close to significance (two-tailed P = 0.06), which was not the case for the difference between the spots treated with the homeopathic after-bite gel and the spots treated with placebo gel (P = 0.13). After pooling the data of a very similar previous pilot study and the present study (ntotal = 83), the homeopathic after-bite gel was significantly superior to no treatment (two-tailed P = 0.003) as well as to placebo gel (two-tailed P = 0.03). Comparing itching after the three treatments, no significant differences could be demonstrated. The extent of itching was positively correlated with the area of the erythema (r = 0.63). Treatment of mosquito bites with the homeopathic after-bite gel will reduce the erythema compared to no treatment. Comparison with the placebo gel suggests it is the plant extracts which are the active components of this gel.

[Comparison of bite marks and teeth features using 2D and 3D methods].

PubMed

Lorkiewicz-Muszyńska, Dorota; Glapiński, Mariusz; Zaba, Czesław; Łabecka, Marzena

2011-01-01

The nature of bite marks is complex. They are found at the scene of crime on different materials and surfaces - not only on human body and corpse, but also on food products and material objects. Human bites on skin are sometimes difficult to interpret and to analyze because of the specific character of skin--elastic and distortable--and because different areas of human body have different surfaces and curvatures. A bite mark left at the scene of crime can be a highly helpful way to lead investigators to criminals. The study was performed to establish: 1) whether bite marks exhibit variations in the accuracy of impressions on different materials, 2) whether it is possible to use the 3D method in the process of identifying an individual based on the comparison of bite marks revealed at the scene, and 3D scans of dental casts, 3) whether application of the 3D method allows for elimination of secondary photographic distortion of bite marks. The authors carried out experiments on simulated cases. Five volunteers bit various materials with different surfaces. Experimental bite marks were collected with emphasis on differentiations of materials. Subsequently, dental impressions were taken from five volunteers in order to prepare five sets of dental casts (the maxilla and mandible. The biting edges of teeth were impressed in wax to create an imprint. The samples of dental casts, corresponding wax bite impressions and bite marks from different materials were scanned with 2D and 3D scanners and photographs were taken. All of these were examined in detail and then compared using different methods (2D and 3D). 1) Bite marks exhibit variations in accuracy of impression on different materials. The most legible reproduction of bite marks was seen on cheese. 2) In comparison of bite marks, the 3D method and 3D scans of dental casts are highly accurate. 3) The 3D method helps to eliminate secondary photographic distortion of bite marks.

Comparison of Preferred Bite Sites between Mites and Ticks on Humans in Korea

PubMed Central

Jang, Mi-Sun; Kim, Choon-Mee; Kim, Dong-Min; Yoon, Na Ra; Han, Mi Ah; Kim, Hyun-Kuk; Oh, Won Sup; Yoon, Hee-Jung; Wie, Seong-Heon; Hur, Jian

2016-01-01

Identification of mite and tick bite sites provides important clinical information. The predominant mite species in Korea associated with scrub typhus are Leptotrombidium pallidum and Leptotrombidium scutellare. The most abundant tick species is Haemaphysalis longicornis. To date, there has been no comparative study on preferred bite sites between mites and ticks in humans. This study included a review of medical records and a field study. For mite bite sites, eschars were checked on 506 patients with scrub typhus, confirmed by indirect immunofluorescence assay or nested polymerase chain reaction on the 56-kDa type-specific antigen gene of Orientia tsutsugamushi. Tick bite sites were identified and marked on a diagram for 91 patients who experienced tick bites within the previous year through a field epidemiological investigation. The mite and tick bite sites in Koreans were compared. The most frequently observed mite bite sites were the anterior chest, including the axillae (29.1%) and the abdominal region, including the inguinal area (26.1%). Tick bite sites were most frequent on the lower extremities (33.0%), followed by the abdominal region, including the inguinal area (26.4%), and upper extremities (26.4%). The distribution was significantly different between mite and tick bite sites (P < 0.001). There was a statistically significant difference in the mite bite (P = 0.001), but not tick bite sites (P = 0.985), between men and women. This is the first report on the differences between tick and mite bite sites, and may help clinicians reach a rapid diagnosis of mite- or tick-borne infection. PMID:27645781

First report of clinical presentation of a bite by a running spider, Philodromus sp. (Araneae: Philodromidae), with recommendations for spider bite management.

PubMed

Coetzee, Maureen; Dippenaar, Ansie; Frean, John; Hunt, Richard H

2017-06-30

This article describes the clinical progression of symptoms over a period of 5 days of a bite inflicted by a Philodromus sp. spider. Commonly known as 'running spiders', these are not considered to be harmful to humans. This report, however, is the first description of an actual bite by a member of this group of spiders showing cytotoxic envenomation. Management of the bites should be as recommended for other cytotoxic spider bites.

A new bite block for panoramic radiographs of anterior edentulous patients: A technical report.

PubMed

Park, Jong-Woong; Symkhampha, Khanthaly; Huh, Kyung-Hoe; Yi, Won-Jin; Heo, Min-Suk; Lee, Sam-Sun; Choi, Soon-Chul

2015-06-01

Panoramic radiographs taken using conventional chin-support devices have often presented problems with positioning accuracy and reproducibility. The aim of this report was to propose a new bite block for panoramic radiographs of anterior edentulous patients that better addresses these two issues. A new panoramic radiography bite block similar to the bite block for dentulous patients was developed to enable proper positioning stability for edentulous patients. The new bite block was designed and implemented in light of previous studies. The height of the new bite block was 18 mm and to compensate for the horizontal edentulous space, its horizontal width was 7 mm. The panoramic radiographs using the new bite block were compared with those using the conventional chin-support device. Panoramic radiographs taken with the new bite block showed better stability and bilateral symmetry than those taken with the conventional chin-support device. Patients also showed less movement and more stable positioning during panoramic radiography with the new bite block. Conventional errors in panoramic radiographs of edentulous patients could be caused by unreliability of the chin-support device. The newly proposed bite block for panoramic radiographs of edentulous patients showed better reliability. Further study is required to evaluate the image quality and reproducibility of images with the new bite block.

First molar cross-bite is more closely associated with a reverse chewing cycle than anterior or pre-molar cross-bite during mastication.

PubMed

Tomonari, H; Ikemori, T; Kubota, T; Uehara, S; Miyawaki, S

2014-12-01

A posterior cross-bite is defined as an abnormal bucco-lingual relationship between opposing molars, pre-molars or both in centric occlusion. Although it has been reported that patients with unilateral posterior cross-bite often show unique chewing patterns, the relationship between the form of cross-bite and masticatory jaw movement remains unclear in adult patients. The objective of this study was to investigate masticatory jaw movement among different forms of cross-bite. One hundred and one adults were recruited in this study: 27 had unilateral first molar cross-bite (MC group); 28, unilateral pre-molar cross-bite (PC group); 23, anterior cross-bite (AC group); and 23, normal occlusion (control group). Masticatory jaw movement of the lower incisor point was recorded with six degrees of freedom jaw-tracking system during unilateral mastication. Our results showed that the reverse chewing ratio during deliberate unilateral mastication was significantly larger in the MC group than in the PA (P < 0.001), AC (P < 0.001) and control (P < 0.001) groups. These findings suggest that compared to the anterior or pre-molar cross-bite, the first molar cross-bite is more closely associated with a higher prevalence of a reverse chewing cycle. © 2014 John Wiley & Sons Ltd.

Human bites - self-care

MedlinePlus

... this page: //medlineplus.gov/ency/patientinstructions/000736.htm Human bites - self-care To use the sharing features ... at higher risk for infection. How to Prevent Human Bites Prevent bites by: Teaching young children not ...

Occlusal contact of fixed implant prostheses using functional bite impression technique.

PubMed

Suzuki, Yasunori; Shimpo, Hidemasa; Ohkubo, Chikahiro

2015-02-01

Functional bite impression (FBI) has been described as a definitive impression made under occlusal force after functional generated path (FGP) recording. This study compared the accuracy of occlusal contact of implant-fixed prostheses using the FBI technique and the conventional impression technique. Twelve subjects, each missing a single premolar or molar, were selected for this study. The conditions of the occlusal contacts were identified by the modified transillumination method. The occlusal contact condition was determined by comparing the rate of change in the occlusal contact area of the implant-fixed prostheses and both adjacent teeth before and after occlusal adjustment. The rate of change in the occlusal contact area using the FBI technique was 96%, and the rate using the conventional technique was 54%. The occlusal contact of implant prostheses using the FBI technique revealed better accuracy than that of the conventional technique. Regarding the FBI technique, a precise and functional prosthesis could be produced by completing the maxillomandibular registration, impression, and FGP at the same time.

Masseter muscle fatigue during sustained clenching in subjects with complete dentures, implant-supported prostheses, and natural teeth.

PubMed

Jacobs, R; van Steenberghe, D

1993-03-01

A sustained submaximal (50%) clenching effort was performed in four patient groups to establish whether implant-supported prosthetic reconstructions influence myoelectrical signal parameters. The first group consisted of patients with natural teeth in both jaws. The other three groups consisted of patients who were edentulous in both jaws: one group had complete dentures; one had an overdenture in the mandible on two implants connected by a bar; and the third had an implant-supported fixed prosthesis in either the maxilla or the mandible. Surface electromyography indicated an increased myoelectrical output level that paralleled a higher bite force level for implant-supported reconstructions compared with complete dentures. Power spectrum analysis revealed a downward shift of the mean power frequency during sustained clenching in all groups except the implant-supported fixed prosthesis. The absence of a spectral shift in the latter group probably reflected a fear of biting too hard and fracturing the prosthesis.

Bites and Scratches (For Parents)

MedlinePlus

... pet (in kids, most animal bites are from dogs ) or a creature from the wild, scratches and ... First Aid: Animal Bites Cat Scratch Disease Preventing Dog Bites Rabies Cuts, Scratches, and Abrasions Dogs and ...

Taking the Bite Out of Dental Readiness: Assessing Readiness in the National Guard and the Reserves

DTIC Science & Technology

2009-04-01

around the world.2 High medical readiness of our forces helps prevent unexpected medical or dental emergencies during training and operational deployments...share of untimely dental emergencies both during training and actual deployments. Seven percent of medical evacuations from US Navy ships and submarines...General for Dental Services, units are required to be ready to deploy. If a reserve airman fails to have the required DFC 3 treatment completed , it

Ecomorphology of the African felid ensemble: the role of the skull and postcranium in determining species segregation and assembling history.

PubMed

Morales, M M; Giannini, N P

2013-05-01

Morphology of extant felids is regarded as highly conservative. Most previous studies have focussed on skull morphology, so a vacuum exists about morphofunctional variation in postcranium and its role in structuring ensembles of felids in different continents. The African felid ensemble is particularly rich in ecologically specialized felids. We studied the ecomorphology of this ensemble using 31 cranial and 93 postcranial morphometric variables measured in 49 specimens of all 10 African species. We took a multivariate approach controlling for phylogeny, with and without body size correction. Postcranial and skull + postcranial analyses (but not skull-only analyses) allowed for a complete segregation of species in morphospace. Morphofunctional factors segregating species included body size, bite force, zeugopodial lengths and osteological features related to parasagittal leg movement. A general gradient of bodily proportions was recovered: lightly built, long-legged felids with small heads and weak bite forces vs. the opposite. Three loose groups were recognized: small terrestrial felids, mid-to-large sized scansorial felids and specialized Acinonyx jubatus and Leptailurus serval. As predicted from a previous study, the assembling of the African felid ensemble during the Plio-Pleistocene occurred by the arrival of distinct felid lineages that occupied then vacant areas of morphospace, later diversifying in the continent. © 2013 The Authors. Journal of Evolutionary Biology © 2013 European Society For Evolutionary Biology.

Inferring biological evolution from fracture patterns in teeth.

PubMed

Lawn, Brian R; Bush, Mark B; Barani, Amir; Constantino, Paul J; Wroe, Stephen

2013-12-07

It is hypothesised that specific tooth forms are adapted to resist fracture, in order to accommodate the high bite forces needed to secure, break down and consume food. Three distinct modes of tooth fracture are identified: longitudinal fracture, where cracks run vertically between the occlusal contact and the crown margin (or vice versa) within the enamel side wall; chipping fracture, where cracks run from near the edge of the occlusal surface to form a spall in the enamel at the side wall; and transverse fracture, where a crack runs horizontally through the entire section of the tooth to break off a fragment and expose the inner pulp. Explicit equations are presented expressing critical bite force for each fracture mode in terms of characteristic tooth dimensions. Distinctive transitions between modes occur depending on tooth form and size, and loading location and direction. Attention is focussed on the relatively flat, low-crowned molars of omnivorous mammals, including humans and other hominins and the elongate canines of living carnivores. At the same time, allusion to other tooth forms - the canines of the extinct sabre-tooth (Smilodon fatalis), the conical dentition of reptiles, and the columnar teeth of herbivores - is made to highlight the generality of the methodology. How these considerations impact on dietary behaviour in fossil and living taxa is discussed. © 2013 Elsevier Ltd. All rights reserved.

Effect of local cooling on excitation-contraction coupling in myasthenic muscle: Another mechanism of ice-pack test in myasthenia gravis.

PubMed

Yamamoto, Daisuke; Imai, Tomihiro; Tsuda, Emiko; Hozuki, Takayoshi; Yamauchi, Rika; Hisahara, Shin; Kawamata, Jun; Shimohama, Shun

2017-11-01

The ice-pack test is a convenient diagnostic testing procedure for myasthenia gravis (MG). We investigated the underlying mechanism of the ice-pack test performed on bilateral masseters. We performed trigeminal repetitive nerve stimulation (RNS), excitation-contraction (E-C) coupling assessment (Imai's method) and bite force measurement before and after cooling of the masseters in MG patients and normal controls. After placing the ice-pack on the masseters for 3min, serial recordings of the three tests were performed at various time intervals during 10min after cooling. The bite force increased significantly after cooling in ice-pack-positive MG patients. The acceleration and acceleration ratio (acceleration at a given time to baseline acceleration) of jaw movement increased significantly after cooling of the masseters in ice-pack-positive MG patients compared to ice-pack-negative patients and normal controls. The prolonged effect of cooling continued until the end of recording even though decremental response to RNS had returned to baseline value. Cooling of myasthenic muscle may induce two effects. One is relatively short effect on electrical synaptic transmission at the endplate, and another is prolonged effect on E-C coupling in the muscle. The ice-pack test induces a prolonged effect of ameliorating impaired E-C coupling in MG. Copyright © 2017 International Federation of Clinical Neurophysiology. Published by Elsevier B.V. All rights reserved.

Development of horizontal tooth wear in maxillary anterior teeth from five to 18 years of age.

PubMed

Nyström, M; Könönen, M; Alaluusua, S; Evälahti, M; Vartiovaara, J

1990-11-01

Sizes of horizontal wear facets of maxillary anterior teeth were studied longitudinally from the primary dentition at age five to the young adult dentition at the age of 18 years. By a planimetric method, we calculated the wear areas on dental casts taken at the ages of five, ten, 14, and 18 years from the dentition of 39 healthy, orthodontically untreated subjects with good morphological occlusion. For young adults, we also studied the association between the amount of wear and reported parafunctions, maximal bite force, salivary buffer capacity, salivary flow rate, and some cephalometric variables. Size of wear facets on all anterior teeth increased with age. Significant correlations were found between the total wear areas of the six anterior primary teeth at five years of age and those of their permanent successors at age 14 (r = 0.44) and 18 (r = 0.39). For an individual, tooth wear at five years of age was, however, of low predictive value for tooth wear in young adulthood, whereas tooth wear at 14 years of age predicted it well (r = 0.89). Highest correlations between tooth wear and background factors at 18 years of age were found for maximal anterior bite force (r = 0.44) and for the size of the gonial angle (r = -0.31). Wear of anterior teeth was not associated with reported parafunctions in young adulthood.

Insect Bites and Stings

MedlinePlus

Most insect bites are harmless, though they sometimes cause discomfort. Bee, wasp, and hornet stings and fire ant bites usually hurt. Mosquito and flea bites usually itch. Insects can also spread diseases. In the United States, ...

Spider Bites (For Parents)

MedlinePlus

... Videos for Educators Search English Español First Aid: Spider Bites KidsHealth / For Parents / First Aid: Spider Bites ... rare. Signs and Symptoms Of a brown recluse spider bite: red blister in the center with surrounding ...

Bacteria Isolated from Conspecific Bite Wounds in Norway and Black Rats: Implications for Rat Bite–Associated Infections In People

PubMed Central

Zabek, Erin; Tang, Patrick; Parsons, Kirbee L.; Koehn, Martha; Jardine, Claire M.; Patrick, David M.

2014-01-01

Abstract Bites associated with wild and domestic Norway and black rats (Rattus norvegicus and Rattus rattus) may have a variety of health consequences in people. Bite-related infections are among the most significant of these consequences; however, there is little data on the infectious agents that can be transmitted from rats to people through biting. This is problematic because without an accurate understanding of bite-related infection risks, it is difficult for health professionals to evaluate the adequacy of existing guidelines for empirical therapy. The objectives of this study were to increase our knowledge of the bacterial species associated with rat bites by studying bite wounds that wild rats inflict upon one another and to review the literature regarding rat bites and bite wound management. Wild Norway and black rats (n=725) were trapped in Vancouver, Canada, and examined for bite wounds in the skin. All apparently infected wounds underwent aerobic and anaerobic culture, and isolated bacteria were identified. Thirty-six rats had bite wound–related infections, and approximately 22 different species of bacteria belonging to 18 genera were identified. Staphylococcus aureus was the most common isolate; however, the majority of infections (72.5%) were polymicrobial. Rat bites can result in infection with a number of aerobic and anaerobic Gram-positive and Gram-negative bacteria. In humans, these wounds are best managed through early recognition and cleansing. The benefit of prophylactic antimicrobial treatment is debatable, but given the deep puncturing nature of rodent bites, we suggest that they should be considered a high risk for infection. Antibiotics selected should include coverage for a broad range of bacterial species. PMID:24528094

Rat Bite Fever

MedlinePlus

... Rat Bite Fever Health Issues Listen Español Text Size Email Print Share Rat Bite Fever Page Content Article Body Rat-bite fever is a disease that occurs in humans who have been bitten by an infected rat ...

Insect Repellents: Protect Your Child from Insect Bites

MedlinePlus

... Print Share Choosing an Insect Repellent for Your Child Page Content Mosquitoes, biting flies, and tick bites ... container with you. Other Ways to Protect Your Child from Insect Bites While you can’t prevent ...

Effects of a Custom Bite-Aligning Mouthguard on Performance in College Football Players.

PubMed

Drum, Scott N; Swisher, Anna M; Buchanan, Christina A; Donath, Lars

2016-05-01

Besides injury prevention, mouthguards can also be employed to improve physical performance. The effects of personalization of mouthguards have rarely been investigated. This 3-armed, randomized, controlled crossover trial investigated the difference of wearing (a) personalized or custom-made (CM, e.g., bite-aligned), (b) standard (BB, boil and bite), and (c) no (CON) mouthguards on general fitness parameters in experienced collegiate football players. A group of 10 upperclassmen (age, 19-22 years; mean ± SD: age = 20.7 ± 0.8 years; body mass = 83 ± 7.4 kg; height = 179.1 ± 5.2 cm; body mass index = 25.9 ± 2.2 kg·cm), National Collegiate Athletic Association Division II football players with at least 2 years of playing experience, were randomly assigned to the 3 mouthguard conditions: a randomized, within-subjects repeated-measures design was applied. All participants were randomly tested on strength and endurance performance V[Combining Dot Above]O2max testing, with Bruce treadmill protocol including (a) time to fatigue, (b) blood lactate concentration in millimoles per liter at stage 2 and (c) at peak fatigue, (d) flexibility, (e) reaction time, (f) squat vertical jump, (g) countermovement vertical jump, and (h) 1 repetition maximum bench press. Repeated-measures analysis of variance showed no significant differences between the 3 conditions for each outcome variable (0.23 < p < 0.94; 0.007 < (Equation is included in full-text article.)< 0.15). These data indicate that CM mouthguards did not superiorly affect general fitness parameters compared with BB and CON. In turn, protective BB or CM mouthpieces did not appear to impair general fitness performance vs. CON. The recommendation of a custom bite-aligning mouthguards for performance enhancement in young Division II football players is questioned. Further studies with larger sample sizes, gender comparison, and (sport) discipline-specific performance testing are needed.

Annual Incidence of Snake Bite in Rural Bangladesh

PubMed Central

Rahman, Ridwanur; Faiz, M. Abul; Selim, Shahjada; Rahman, Bayzidur; Basher, Ariful; Jones, Alison; d'Este, Catherine; Hossain, Moazzem; Islam, Ziaul; Ahmed, Habib; Milton, Abul Hasnat

2010-01-01

Background Snake bite is a neglected public health problem in the world and one of the major causes of mortality and morbidity in many areas, particularly in the rural tropics. It also poses substantial economic burdens on the snake bite victims due to treatment related expenditure and loss of productivity. An accurate estimate of the risk of snake bite is largely unknown for most countries in the developing world, especially South-East Asia. Methodology/Principal Findings We undertook a national epidemiological survey to determine the annual incidence density of snake bite among the rural Bangladeshi population. Information on frequency of snake bite and individuals' length of stay in selected households over the preceding twelve months was rigorously collected from the respondents through an interviewer administered questionnaire. Point estimates and confidence intervals of the incidence density of snake bite, weighted and adjusted for the multi-stage cluster sampling design, were obtained. Out of 18,857 study participants, over one year a total of 98 snake bites, including one death were reported in rural Bangladesh. The estimated incidence density of snake bite is 623.4 / 100,000 person years (95% C I 513.4–789.2 /100,000 person years). Biting occurs mostly when individuals are at work. The majority of the victims (71%) receive snake bites to their lower extremities. Eighty-six percent of the victims received some form of management within two hours of snake bite, although only three percent of the victims went directly to either a medical doctor or a hospital. Conclusions/Significance Incidence density of snake bite in rural Bangladesh is substantially higher than previously estimated. This is likely due to better ascertainment of the incidence through a population based survey. Poor access to health services increases snake bite related morbidity and mortality; therefore, effective public health actions are warranted. PMID:21049056

A qualitative investigation of the perceptions of female dog-bite victims and implications for the prevention of dog bites.

PubMed

Westgarth, Carri; Watkins, Francine

2015-01-01

Preventing dog bites is an increasingly important public health and political issue with implications for both human and animal health and welfare. Expert opinion is that most bites are preventable. Intervention materials have been designed to educate people on how to assess the body language of dogs, evaluate risk, and take appropriate action. The effectiveness of this approach is rarely evaluated and the incidence of dog bites is thought to be increasing. Is the traditional approach to dog bite prevention working as well as it should? In this novel, small scale qualitative study, the perceptions of victims regarding their dog bite experience were explored in-depth. The study recruited 8 female participants who had been bitten by a dog in the past 5 years. In-depth, one-to-one interviews were conducted, transcribed, and analyzed using thematic analysis. The findings indicate that dog bites may not be as easily preventable as previously presumed, and that education about dog body language may not prevent some types of dog bites. The reasons participants were bitten were multifaceted and complex. In some cases, there was no interaction with the dog before the bite so there was no opportunity to assess the situation and modify behavior around the dog accordingly. Identifying who was to blame, and had responsibility for preventing the bite, was straightforward for the participants in hindsight. Those bitten blamed themselves and/or the dog owner, but not the dog. Most participants already felt they had a theoretical knowledge that would allow them to recognize dog aggression before the dog bite, yet participants, especially those who worked regularly with dogs, routinely believed, "it would not happen to me." We also identified an attitude that bites were "just one of those things," which could also be a barrier prevention initiatives. Rather than being special to the human-canine relationship, the attitudes discovered mirror those found in other areas of injury prevention. A new approach to dog-bite prevention may now be required, drawing on other injury prevention strategies including awareness-raising and minimizing the damage caused by a bite when it happens.

Epidemiology of severe and fatal rattlesnake bites published in the American Association of Poison Control Centers' Annual Reports.

PubMed

Walter, Frank G; Stolz, Uwe; Shirazi, Farshad; McNally, Jude

2009-08-01

No study has focused on the nationwide epidemiology of severe and fatal rattlesnake bites during the last 25 years. We examined rates and temporal trends of severe and fatal rattlesnake bites across the United States. Our hypothesis was that nationwide annual rates of both severe and fatal outcomes from rattlesnake bites have remained unchanged over time. This study retrospectively analyzed all human rattlesnake bites published in the Annual Reports of the American Association of Poison Control Centers from 1983 through 2007. Annual rates of severe (major) and fatal rattlesnake bites were calculated using the annual number of major outcomes and fatalities as respective numerators and the total annual number of single rattlesnake bites (exposures) as denominators. Negative binomial and Poisson regressions were used to examine trends of severe and fatal rattlesnake bites over time. Annually, from 1985 to 2007, the incidence rate of major outcomes decreased by 2% per year (incidence rate ratio = 0.980; CI = 0.967-0.993), corresponding to an absolute annual rate decrease of two major outcomes per 1,000 bites per year. Annual rates of fatalities showed no statistically significant change from 1983 through 2007. This is the first study to examine rates and trends of published severe and fatal rattlesnake bites across the United States over the past 25 years. Annual rates of severe rattlesnake bites, derived from the published Annual Reports of the American Association of Poison Control Centers, have significantly decreased over time, whereas rates of fatal rattlesnake bites have remained unchanged.

Psychological stress-relieving effects of chewing - Relationship between masticatory function-related factors and stress-relieving effects.

PubMed

Tasaka, Akinori; Kikuchi, Manaki; Nakanishi, Kousuke; Ueda, Takayuki; Yamashita, Shuichiro; Sakurai, Kaoru

2018-01-01

The objective of the present study was to investigate the relationship between masticatory function-related factors (masticatory performance, occlusal contact area, maximum bite force, number of chewing strokes, and muscle activity) and the stress-relieving effects of chewing. A total of 28 healthy male subjects were instructed to rest or chew for 10min after 30min of stress loading with arithmetic calculations. Their stress state was assessed by measuring salivary cortisol levels. Saliva was collected at three time points: before stress loading, immediately after stress loading, and 10min after stress loading. Compared to resting, chewing produced a significantly greater reduction in the rate of change in salivary cortisol levels 10min after stress loading. A negative correlation was observed between the rate of decrease in salivary cortisol levels and the number of chewing strokes. No significant correlation was observed between the rate of decrease in salivary cortisol levels and other measurement items. In healthy dentulous people, the number of chewing strokes has been shown to be a masticatory function-related factor that affects stress relief from chewing, suggesting the possibility that more appropriate chewing would produce a greater effect psychological stress relief. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Craniofacial variation and dietary adaptations of African colobines.

PubMed

Koyabu, Daisuke B; Endo, Hideki

2009-06-01

African colobine monkeys show considerable craniofacial variation among species, although the evolutionary causes of this diversity are unclear. In light of growing evidence that diet varies considerably among colobine species, we investigated whether colobine craniofacial morphology varies as a function of their diet. We compared craniofacial morphology among five African species: Colobus angolensis, C. guereza, C. polykomos, Piliocolobus badius, and P. verus. Matrix correlation analysis indicated a significant correlation between species-specific morphological distance and dietary distance matrices. The mechanical advantage of the masseter muscle was higher in seed-eaters (C. angolensis and C. polykomos) and lower in those that eat mainly young leaves (C. guereza, P. badius, and P. verus). Canonical correspondence analysis revealed that the durophagous colobines possess relatively wider bigonial breadths, anteroposteriorly shorter faces, shorter postcanine tooth rows, more medially positioned dental batteries, wider bizygomatic arches, and anteroposteriorly longer zygomatic arches. Under the constrained lever model, these morphological features suggest that durophagous colobines have the capacity to generate relatively greater maximum bite forces. However, no consistent relationship was observed between diet and variation in the mandibular corpus and symphysis, implying that robust mandibles are not necessarily adaptations for stress resistance. Factors that may influence mandibular robusticity include allometry of symphyseal curvature and canine tooth support. Finally, linear measures of mandibular robusticity may suffer from error.

Snake bite envenomation in Riyadh province of Saudi Arabia over the period (2005-2010).

PubMed

Al-Sadoon, Mohammed K

2015-03-01

The present investigation is a retrospective review of snake bites in Riyadh province over the period (2005-2010). A total of 1019 cases of bites admitted to the Ministry of Health medical centers in Riyadh province were analyzed on the basis of age, sex, time of bite and its site on the body, outcome of treatment, antiserum dose and type of snake. Bites occurred throughout the six years with the highest frequency in 2005 and least in 2006 where most of the bite cases were mild and all evolved to cure except four patients who died following the administration of antivenom during 24 h after snake bite. Most of the patients were males (81.7%) and the most attacked age was within the range of 11-30 years (51.5%). All the bites were mainly in the exposed limbs and the most frequently bitten anatomical regions were the lower limbs (427 cases, 41.9%), principally the feet. The study incriminates Cerastes cerastes gasperettii in most of the bites indicating it as the snake of medical importance in Riyadh province. Also, the study indicates low degree of threat in spite of high rate of snake bites as a result of the availability of the medical facilities and the antivenin use in medical centers in Riyadh province.

Comparison of Maximum Stretch Forces between Femtosecond Laser-Assisted Capsulotomy and Continuous Curvilinear Capsulorhexis

PubMed Central

Ichikawa, Kei; Tanaka, Yoshiki; Kato, Yukihito; Horai, Rie; Tamaoki, Akeno; Ichikawa, Kazuo

2017-01-01

The current study reports comparing the postoperative mechanical properties of the anterior capsule between femtosecond laser capsulotomy (FLC) and continuous curvilinear capsulorhexis (CCC) of variable size and shape in porcine eyes. All CCCs were created using capsule forceps. Irregular or eccentric CCCs were also created to simulate real cataract surgery. For FLC, capsulotomies 5.3 mm in diameter were created using the LenSx® (Alcon) platform. Fresh porcine eyes were used in all experiments. The edges of the capsule openings were pulled at a constant speed using two L-shaped jigs. Stretch force and distance were recorded over time, and the maximum values in this regard were defined as those that were recorded when the capsule broke. There was no difference in maximum stretch force between CCC and FLC. There were no differences in circularity between FLC and same-sized CCC. However, same-sized CCC did show significantly higher maximum stretch forces than FLC. Teardrop-shaped CCC showed lower maximum stretch forces than same-sized CCC and FLC. Heart-shaped CCC showed lower maximum stretch forces than same-sized CCC. Conclusively, while capsule edge strength after CCC varied depending on size or irregularities, FLC had the advantage of stable maximum stretch forces. PMID:28210504

Comparison of Maximum Stretch Forces between Femtosecond Laser-Assisted Capsulotomy and Continuous Curvilinear Capsulorhexis.

PubMed

Takagi, Mari; Kojima, Takashi; Ichikawa, Kei; Tanaka, Yoshiki; Kato, Yukihito; Horai, Rie; Tamaoki, Akeno; Ichikawa, Kazuo

2017-01-01

The current study reports comparing the postoperative mechanical properties of the anterior capsule between femtosecond laser capsulotomy (FLC) and continuous curvilinear capsulorhexis (CCC) of variable size and shape in porcine eyes. All CCCs were created using capsule forceps. Irregular or eccentric CCCs were also created to simulate real cataract surgery. For FLC, capsulotomies 5.3 mm in diameter were created using the LenSx® (Alcon) platform. Fresh porcine eyes were used in all experiments. The edges of the capsule openings were pulled at a constant speed using two L-shaped jigs. Stretch force and distance were recorded over time, and the maximum values in this regard were defined as those that were recorded when the capsule broke. There was no difference in maximum stretch force between CCC and FLC. There were no differences in circularity between FLC and same-sized CCC. However, same-sized CCC did show significantly higher maximum stretch forces than FLC. Teardrop-shaped CCC showed lower maximum stretch forces than same-sized CCC and FLC. Heart-shaped CCC showed lower maximum stretch forces than same-sized CCC. Conclusively, while capsule edge strength after CCC varied depending on size or irregularities, FLC had the advantage of stable maximum stretch forces.

Repeated Amblyomma testudinarium tick bites are associated with increased galactose-α-1,3-galactose carbohydrate IgE antibody levels: A retrospective cohort study in a single institution.

PubMed

Hashizume, Hideo; Fujiyama, Toshiharu; Umayahara, Takatsune; Kageyama, Reiko; Walls, Andrew F; Satoh, Takahiro

2018-06-01

Alpha-gal syndrome is a hypersensitivity reaction to red meat mediated by IgE antibody specific to galactose-α-1,3-galactose carbohydrate (alpha-gal). Amblyomma tick bites are associated with this condition, but the pathophysiology is not understood. To clarify the mechanism of development of alpha-gal syndrome after tick bites. We compared alpha-gal antibody levels between patients with and without a history of tick bites and examined histologic stainings of tick bite lesions between patients with and without detectable alpha-gal IgE antibody. Patients who had ≥2 tick bites had higher levels of alpha-gal IgE antibody compared with those with only 1 tick bite or healthy individuals. On histologic investigation, greater numbers of basophils and eosinophils, but not mast cells, were observed infiltrating lesions of patients with ≥2 tick bites compared with those with 1 tick bite. Type 2 cytokine-producing T-cell infiltration was predominantly observed in such patients. The study was conducted at a single institution in Japan. In Amblyomma tick bite lesions, basophils; eosinophils; and type 2, cytokine-producing T cells infiltrate the skin and alpha-gal IgE antibodies are produced. These findings provide a potential mechanistic connection between Amblyomma bites and red meat hypersensitivity. Copyright © 2017 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Camouflage treatment for class III malocclusion combined with traction of an impacted maxillary central incisor.

PubMed

Closs, Luciane Quadrado; Mundstock, Karina Santos; Ribeiro, Darlene Santos; Reston, Eduardo Galia; Silva, Aurelício Novaes

2010-01-01

This case report describes the treatment of a patient with an unerupted maxillary left central incisor, class III malocclusion with crossbite of the maxillary posterior teeth and lateral open bite. Treatment consisted of rapid maxillary expansion followed by anterior space opening, maxillary protraction and traction of the unerupted teeth with a light force system. Favorable results were obtained in terms of correcting incisor position and class III malocclusion. The results achieved remained stable throughout a 4-year retention period.

A comparative study between xerographic, computer-assisted overlay generation and animated-superimposition methods in bite mark analyses.

PubMed

Tai, Meng Wei; Chong, Zhen Feng; Asif, Muhammad Khan; Rahmat, Rabiah A; Nambiar, Phrabhakaran

2016-09-01

This study was to compare the suitability and precision of xerographic and computer-assisted methods for bite mark investigations. Eleven subjects were asked to bite on their forearm and the bite marks were photographically recorded. Alginate impressions of the subjects' dentition were taken and their casts were made using dental stone. The overlays generated by xerographic method were obtained by photocopying the subjects' casts and the incisal edge outlines were then transferred on a transparent sheet. The bite mark images were imported into Adobe Photoshop® software and printed to life-size. The bite mark analyses using xerographically generated overlays were done by comparing an overlay to the corresponding printed bite mark images manually. In computer-assisted method, the subjects' casts were scanned into Adobe Photoshop®. The bite mark analyses using computer-assisted overlay generation were done by matching an overlay and the corresponding bite mark images digitally using Adobe Photoshop®. Another comparison method was superimposing the cast images with corresponding bite mark images employing the Adobe Photoshop® CS6 and GIF-Animator©. A score with a range of 0-3 was given during analysis to each precision-determining criterion and the score was increased with better matching. The Kruskal Wallis H test showed significant difference between the three sets of data (H=18.761, p<0.05). In conclusion, bite mark analysis using the computer-assisted animated-superimposition method was the most accurate, followed by the computer-assisted overlay generation and lastly the xerographic method. The superior precision contributed by digital method is discernible despite the human skin being a poor recording medium of bite marks. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Kinetics of the head-neck complex in low-speed rear impact.

PubMed

Stemper, Brian D; Yoganandan, Naryan; Pintar, Frank A

2003-01-01

A comprehensive characterization of the biomechanics of the cervical spine in rear impact will lead to an understanding of the mechanisms of whiplash injury. Cervical kinematics have been experimentally described using human volunteers, full-body cadaver specimens, and isolated and intact head-neck specimens. However, forces and moments at the cervico-thoracic junction have not been clearly delineated. An experimental investigation was performed using ten intact head-neck complexes to delineate the loading at the base of the cervical spine and angular acceleration of the head in whiplash. A pendulum-minisled apparatus was used to simulate whiplash acceleration of the thorax at four impact severities. Lower neck loads were measured using a six-axis load cell attached between the minisled and head-neck specimens, and head angular motion was measured with an angular rate sensor attached to the lateral side of the head. Shear and axial force, extension moment, and head angular acceleration increased with impact severity. Shear force was significantly larger than axial force (p < 0.0001). Shear force reached its maximum value at 46 msec. Maximum extension moment occurred between 7 and 22 msec after maximum shear force. Maximum angular acceleration of the head occurred 2 to 18 msec later. Maximum axial force occurred last (106 msec). All four kinetic components reached maximum values during cervical S-curvature, with maximum shear force and extension moment occurring before the attainment of maximum S-curvature. Results of the present investigation indicate that shear force and extension moment at the cervico-thoracic junction drive the non-physiologic cervical S-curvature responsible for whiplash injury and underscore the importance of understanding cervical kinematics and the underlying kinetics.

A comparative evaluation of dimensional stability of three types of interocclusal recording materials-an in-vitro multi-centre study.

PubMed

Tejo, Sampath Kumar; Kumar, Anil G; Kattimani, Vivekanand S; Desai, Priti D; Nalla, Sandeep; Chaitanya K, Krishna

2012-10-05

The introduction of different interocclusal recording materials has put clinicians in dilemma that which material should be used in routine clinical practice for precise recording and transferring of accurate existing occlusal records for articulation of patient's diagnostic or working casts in the fabrication of good satisfactory prosthesis. In the era of developing world of dentistry the different materials are introduced for interocclusal record with different brand names because of this; the utility of the material is confusing for successful delivery of prosthesis with lack of in vitro or in vivo studies which will predict the property of the material with utility recommendations. The aim of this multicenter research is to evaluate the time dependent linear dimensional stability of three types of interocclusal recording materials; which gives very clear idea to clinicians in regard to its usage in routine practice and recommendations for usage of the different materials. Also to find out ideal time for articulation of three types of interocclusal recording materials with accuracy. Commercially available and ADA approved Polyether bite registration paste (Ramitec), Poly vinyl siloxane bite registration paste (Jetbite) and Zinc oxide eugenol (ZOE) bite registration paste (Super bite) were used in the study.A stainless steel die was made according to modified American dental Associations (ADA) specification no. 19. Each one of the tested materials were manipulated according to manufacturers' instructions. The materials separated from die, 3-mins after their respective setting time, resulted in disks of standard diameter. Two parallel lines and three perpendicular lines reproduced on the surface. The distance between two parallel lines was measured at different time intervals i.e. 1 hour, 24, 48 and 72 hours by using travelling microscope (magnus) and compared with standard die measurements made according to ADA specification no.19 to find out the dimensional stability of these interocclusal recording materials. Total 120 samples were made for observation and results were subjected to statistical analysis. Statistical analysis was performed using analysis of variance (ANOVA) and then Tukey's Honestly Significant Difference (HSD) test for comparison among groups at the 0.05 level of significance. After statistical analysis of the data, results were obtained and analyzed for interpretation. The results shows significant difference between the dimensional stability of all three material at different intervals with p-value <0.05. Comparatively the polyether bite registration material showed less distortion with good dimensional stability compared to Poly vinyl siloxane bite (Jetbite), Zinc oxide eugenol(ZOE) bite (Super bite) at 1 hour, 24, 48, and 72 hours. The dimensional stability decreased with increase in time and is influenced by both material factor and time factor. Polyether was found to be more dimensionally stable interocclusal recording material, which was followed by Silicone and Zinc oxide eugenol (ZOE). The dimensional stability of Polyether was good. Zinc oxide eugenol is dimensionally more unstable when compared with polyether and polyvinyl siloxane. We recommend that the polyether interocclusal records must be articulated within 48 hours and Polyvinylsiloxane interocclusal records must be articulated within 24 hours and the ZOE should be articulated within 1 hour to get a correct restoration to have very minimum distortion and maximum satisfaction without failure of prosthesis.

A comparative evaluation of dimensional stability of three types of interocclusal recording materials-an in-vitro multi-centre study

PubMed Central

2012-01-01

Background The introduction of different interocclusal recording materials has put clinicians in dilemma that which material should be used in routine clinical practice for precise recording and transferring of accurate existing occlusal records for articulation of patient’s diagnostic or working casts in the fabrication of good satisfactory prosthesis. In the era of developing world of dentistry the different materials are introduced for interocclusal record with different brand names because of this; the utility of the material is confusing for successful delivery of prosthesis with lack of in vitro or in vivo studies which will predict the property of the material with utility recommendations. Purpose of the study The aim of this multicenter research is to evaluate the time dependent linear dimensional stability of three types of interocclusal recording materials; which gives very clear idea to clinicians in regard to its usage in routine practice and recommendations for usage of the different materials. Also to find out ideal time for articulation of three types of interocclusal recording materials with accuracy. Materials and method Commercially available and ADA approved Polyether bite registration paste (Ramitec), Poly vinyl siloxane bite registration paste (Jetbite) and Zinc oxide eugenol (ZOE) bite registration paste (Super bite) were used in the study. A stainless steel die was made according to modified American dental Associations (ADA) specification no. 19. Each one of the tested materials were manipulated according to manufacturers’ instructions. The materials separated from die, 3-mins after their respective setting time, resulted in disks of standard diameter. Two parallel lines and three perpendicular lines reproduced on the surface. The distance between two parallel lines was measured at different time intervals i.e. 1 hour, 24, 48 and 72 hours by using travelling microscope (magnus) and compared with standard die measurements made according to ADA specification no.19 to find out the dimensional stability of these interocclusal recording materials. Total 120 samples were made for observation and results were subjected to statistical analysis. Statistical analysis was performed using analysis of variance (ANOVA) and then Tukey’s Honestly Significant Difference (HSD) test for comparison among groups at the 0.05 level of significance. After statistical analysis of the data, results were obtained and analyzed for interpretation. Results The results shows significant difference between the dimensional stability of all three material at different intervals with p-value <0.05. Comparatively the polyether bite registration material showed less distortion with good dimensional stability compared to Poly vinyl siloxane bite (Jetbite), Zinc oxide eugenol(ZOE) bite (Super bite) at 1 hour, 24, 48, and 72 hours. Conclusion The dimensional stability decreased with increase in time and is influenced by both material factor and time factor. Polyether was found to be more dimensionally stable interocclusal recording material, which was followed by Silicone and Zinc oxide eugenol (ZOE). The dimensional stability of Polyether was good. Zinc oxide eugenol is dimensionally more unstable when compared with polyether and polyvinyl siloxane. We recommend that the polyether interocclusal records must be articulated within 48 hours and Polyvinylsiloxane interocclusal records must be articulated within 24 hours and the ZOE should be articulated within 1 hour to get a correct restoration to have very minimum distortion and maximum satisfaction without failure of prosthesis. PMID:23039395

Does combined strength training and local vibration improve isometric maximum force? A pilot study.

PubMed

Goebel, Ruben; Haddad, Monoem; Kleinöder, Heinz; Yue, Zengyuan; Heinen, Thomas; Mester, Joachim

2017-01-01

The aim of the study was to determine whether a combination of strength training (ST) and local vibration (LV) improved the isometric maximum force of arm flexor muscles. ST was applied to the left arm of the subjects; LV was applied to the right arm of the same subjects. The main aim was to examine the effect of LV during a dumbbell biceps curl (Scott Curl) on isometric maximum force of the opposite muscle among the same subjects. It is hypothesized, that the intervention with LV produces a greater gain in isometric force of the arm flexors than ST. Twenty-seven collegiate students participated in the study. The training load was 70% of the individual 1 RM. Four sets with 12 repetitions were performed three times per week during four weeks. The right arm of all subjects represented the vibration trained body side (VS) and the left arm served as the traditional trained body side (TTS). A significant increase of isometric maximum force in both body sides (Arms) occurred. VS, however, significantly increased isometric maximum force about 43% in contrast to 22% of the TTS. The combined intervention of ST and LC improves isometric maximum force of arm flexor muscles. III.

Muscle Force-Velocity Relationships Observed in Four Different Functional Tests.

PubMed

Zivkovic, Milena Z; Djuric, Sasa; Cuk, Ivan; Suzovic, Dejan; Jaric, Slobodan

2017-02-01

The aims of the present study were to investigate the shape and strength of the force-velocity relationships observed in different functional movement tests and explore the parameters depicting force, velocity and power producing capacities of the tested muscles. Twelve subjects were tested on maximum performance in vertical jumps, cycling, bench press throws, and bench pulls performed against different loads. Thereafter, both the averaged and maximum force and velocity variables recorded from individual trials were used for force-velocity relationship modeling. The observed individual force-velocity relationships were exceptionally strong (median correlation coefficients ranged from r = 0.930 to r = 0.995) and approximately linear independently of the test and variable type. Most of the relationship parameters observed from the averaged and maximum force and velocity variable types were strongly related in all tests (r = 0.789-0.991), except for those in vertical jumps (r = 0.485-0.930). However, the generalizability of the force-velocity relationship parameters depicting maximum force, velocity and power of the tested muscles across different tests was inconsistent and on average moderate. We concluded that the linear force-velocity relationship model based on either maximum or averaged force-velocity data could provide the outcomes depicting force, velocity and power generating capacity of the tested muscles, although such outcomes can only be partially generalized across different muscles.

Effect of low-power gallium-aluminum-arsenium noncoherent light (640 nm) on muscle activity: a clinical study.

PubMed

Kelencz, Carlos A; Muñoz, Ingrid S S; Amorim, César F; Nicolau, Renata A

2010-10-01

Studies have shown the significant effects of electromagnetic irradiation in the visible region, with laser as an irradiation source. However, the effect of LEDs (light-emitting diodes) irradiation in similar wavelengths is not known. The purpose of this clinical study was to verify the effects of the LED (640 nm with 40 nm full bandwidth at half maximum) on muscle activity. The study was done with 30 test subjects, of both genders, aged 23 ± 3 years, with a mean weight of 60 kg, divided into three groups (n = 10). Fatigue was induced through the maximum power of a bite, for 60 s in two overlaid occlusal platforms, coupled to a load cell and to a biologic signal-acquisition device. LED irradiation of the right masseter muscle was applied to all subjects. The left muscle received placebo treatment. Irradiation was applied in eight points on the right masseter muscle (transcutaneous), 1.044 J per point, 2.088 J per point, or 3.132 J per point, 0.116 W, 0.522 cm(2) spot size, 0.816 cm spot Ø, continuous wave, perpendicular to the skin. An increase in muscle activity was observed after irradiation with 1.044 J per point (p < 0.05). A significant increase (p < 0.01) in the time before fatigue was observed in the irradiated muscle with 2.088 J per point, without a change in the force of contraction (p > 0.05). This change was not observed with 1.044 J per point and 3.132 J per point. The results suggest a dose-dependent relation with this kind of noncoherent irradiation in the red region of the electromagnetic spectrum in the muscle-fatigue process. It was concluded that LED can be used as a clinical tool to increase muscle activity (1.044 J per point) and to prevent fatigue (2.088 J per point), without change in the muscle force.

Occupational Snake Bites: a Prospective Case Series of Patients Reported to the ToxIC North American Snakebite Registry.

PubMed

Spyres, Meghan B; Ruha, Anne-Michelle; Seifert, Steven; Onisko, Nancy; Padilla-Jones, Angela; Smith, Eric Anthony

2016-12-01

In the developing world, occupation has been identified as a risk factor for snake bite. Such an association has not been described in the USA. The objective of this study was to describe the epidemiology and clinical manifestations of occupational snake bite in patients reported to the ToxIC North American Snakebite Registry (NASBR). This was a prospective case series of patients reported to the ToxIC NASBR between January 1, 2014 and November 5, 2015. Variables collected included snake species, patient demographics, date and location of exposure, occupation, bite location, clinical manifestations, and management. Of 180 adult snake bites reported, 25 (13.9 %; 95 % CI 9.2-19.8 %) were occupational in nature. Rattlesnake envenomations were common (80 %). Most snake bites (96 %) occurred in men. Occupations most associated with snake bite were landscaping (28 %) and working directly with snakes (24 %). Fifty-six percent of bites occurred in an outdoor work environment. Seventy-six percent of envenomations were to the upper extremities. Intentional interaction occurred in 40 % of cases, all of which sustained finger envenomations. No cases presented with apparent acute ethanol intoxication. The majority of occupational snake bites occurred in men working outdoors and were unintentional injuries. Bites involving the upper extremity tended to result from intentional interactions. Acute ethanol intoxication did not appear to be involved with occupational envenomations.

Snake bite envenomation in Riyadh province of Saudi Arabia over the period (2005–2010)

PubMed Central

Al-Sadoon, Mohammed K.

2014-01-01

The present investigation is a retrospective review of snake bites in Riyadh province over the period (2005–2010). A total of 1019 cases of bites admitted to the Ministry of Health medical centers in Riyadh province were analyzed on the basis of age, sex, time of bite and its site on the body, outcome of treatment, antiserum dose and type of snake. Bites occurred throughout the six years with the highest frequency in 2005 and least in 2006 where most of the bite cases were mild and all evolved to cure except four patients who died following the administration of antivenom during 24 h after snake bite. Most of the patients were males (81.7%) and the most attacked age was within the range of 11–30 years (51.5%). All the bites were mainly in the exposed limbs and the most frequently bitten anatomical regions were the lower limbs (427 cases, 41.9%), principally the feet. The study incriminates Cerastes cerastes gasperettii in most of the bites indicating it as the snake of medical importance in Riyadh province. Also, the study indicates low degree of threat in spite of high rate of snake bites as a result of the availability of the medical facilities and the antivenin use in medical centers in Riyadh province. PMID:25737653

Validity of the Bite Counter device in a controlled laboratory setting.

PubMed

Desendorf, Jenna; Bassett, David R; Raynor, Hollie A; Coe, Dawn P

2014-08-01

Body-borne sensors may be useful in assessing eating behaviors and have the potential to overcome some of the limitations of self-report instruments. The Bite Counter is a new commercial device, worn on the wrist that purports to track the number of bites taken per day. It contains a tri-axial accelerometer that detects an upward, arcing motion from the table to the mouth, known as a wrist roll. To examine the validity of the Bite Counter device for measuring bites in individuals while consuming various foods and beverages. 15 adults (23-58 years old) wore the device on the wrist of their dominant hand. They were presented with a meal consisting of foods/beverages, each consumed with different utensils: meat (knife and fork), side items (fork), soup (spoon), pizza (hands), can of soda (hands), and a smoothie (straw). Each food or drink was consumed by itself, in consecutive order. A researcher observed them through a one-way mirror and counted the number of bites taken. The percentage of actual bites taken varied as follows: Meat (127%), side items (82.6%), soup (60.2%), pizza (87.3%), soda (81.7%), and smoothie (57.7%). The overall mean was 81.2% of bites taken. The results indicate that the Bite Counter holds promise for being able to count the number of hand-to-mouth movements. In general, it underestimated hand-to-mouth movements, but some types of hand movements caused overestimation of bites. Future studies should be undertaken to improve the sensitivity and specificity of the Bite Counter device. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluation of the Elastic Properties of Thirteen Silicone Interocclusal Recording Materials

PubMed Central

Zietek, Marek

2016-01-01

Background. Addition silicones are popular as dental impression materials and are used in bite registration procedures. Objective. This study aimed to compare the postsetting elasticities and other mechanical properties of thirteen addition silicone interocclusal recording materials. Materials and Methods. The following materials were investigated: Colorbite D, Futar D, Genie Bite, Jet Blue Bite fast, Memoreg 2, O-Bite, Occlufast Rock, Omni-Bite Plus, Regidur i, Registrado X-tra, Regofix transparent, StoneBite, and Variotime Bite. Thirty specimens of each material were tested. The elasticities and strengths of the materials were measured with a universal testing machine, and computer software was used to determine the E-moduli, ultimate tensile strengths, and ultimate elongations of the specimens. Results. The results were subjected to statistical analysis using the Kruskal-Wallis test (p ≤ 0.05). The statistics revealed that the mean E-modulus values varied significantly across the materials (p = 0.000) and were highest for the StoneBite and Registrado X-tra and lowest for the Regofix transparent. The ultimate tensile strengths were highest for the Regofix transparent and Registrado X-tra (p = 0.000) and lowest for the Jet Blue Bite fast and Memoreg 2 (p = 0.000). The elongation percentages at the point of breaking varied significantly across the materials (p = 0.000); the lowest value was observed for the StoneBite, whereas the Regofix transparent nearly doubled original length. Conclusions. The authors concluded that materials with the high E-moduli and great ultimate tensile strengths may be most useful clinically. Registrado X-tra and StoneBite best met these criteria. PMID:27747239

Consumer perception of salt-reduced breads: Comparison of single and two-bites evaluation.

PubMed

Antúnez, Lucía; Giménez, Ana; Alcaire, Florencia; Vidal, Leticia; Ares, Gastón

2017-10-01

Salt-reduction in processed products has been proposed as a high-impact intervention for reducing the sodium intake at population level. A major limitation for this approach is its potential negative impact on the sensory characteristics of products. The current practice in sensory and consumer science involves single sip/bite evaluations, which may not properly reflect the sensory experience that occurs during product consumption. In this context, the aim of the present work was to compare single and two bite evaluations of consumer sensory and hedonic perception of salt-reduced breads. Five studies with a total of 499 consumers were carried out, in which overall-liking scores of five salt-reduced bread samples were collected after the first and the second bite evaluation. In one of the studies consumers also answered a CATA (check-all-that-apply) question after the first and the second bite. Neither bite nor the interaction between samples and bite had a significant effect on hedonic scores. However, when hedonic scores were analysed separately for each bite, the overall liking scores from the second bite evaluation better reflected differences among samples according to their salt content in two of the five studies. The sensory characterization of the samples did not largely vary between the first and the second bite. Results suggest that consumers' perception of salt reduced bread samples did not largely vary between a single and a two bites evaluation. Further research is warranted in this regard, in particular considering more complex products. Copyright © 2017 Elsevier Ltd. All rights reserved.

Developmental finite element analysis of cichlid pharyngeal jaws: Quantifying the generation of a key innovation.

PubMed

Peterson, Tim; Müller, Gerd B

2018-01-01

Advances in imaging and modeling facilitate the calculation of biomechanical forces in biological specimens. These factors play a significant role during ontogenetic development of cichlid pharyngeal jaws, a key innovation responsible for one of the most prolific species diversifications in recent times. MicroCT imaging of radiopaque-stained vertebrate embryos were used to accurately capture the spatial relationships of the pharyngeal jaw apparatus in two cichlid species (Haplochromis elegans and Amatitlania nigrofasciata) for the purpose of creating a time series of developmental stages using finite element models, which can be used to assess the effects of biomechanical forces present in a system at multiple points of its ontogeny. Changes in muscle vector orientations, bite forces, force on the neurocranium where cartilage originates, and stress on upper pharyngeal jaws are analyzed in a comparative context. In addition, microCT scanning revealed the presence of previously unreported cement glands in A. nigrofasciata. The data obtained provide an underrepresented dimension of information on physical forces present in developmental processes and assist in interpreting the role of developmental dynamics in evolution.

Developmental finite element analysis of cichlid pharyngeal jaws: Quantifying the generation of a key innovation

PubMed Central

Müller, Gerd B.

2018-01-01

Advances in imaging and modeling facilitate the calculation of biomechanical forces in biological specimens. These factors play a significant role during ontogenetic development of cichlid pharyngeal jaws, a key innovation responsible for one of the most prolific species diversifications in recent times. MicroCT imaging of radiopaque-stained vertebrate embryos were used to accurately capture the spatial relationships of the pharyngeal jaw apparatus in two cichlid species (Haplochromis elegans and Amatitlania nigrofasciata) for the purpose of creating a time series of developmental stages using finite element models, which can be used to assess the effects of biomechanical forces present in a system at multiple points of its ontogeny. Changes in muscle vector orientations, bite forces, force on the neurocranium where cartilage originates, and stress on upper pharyngeal jaws are analyzed in a comparative context. In addition, microCT scanning revealed the presence of previously unreported cement glands in A. nigrofasciata. The data obtained provide an underrepresented dimension of information on physical forces present in developmental processes and assist in interpreting the role of developmental dynamics in evolution. PMID:29320528

21 CFR 882.5070 - Bite block.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bite block. 882.5070 Section 882.5070 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Therapeutic Devices § 882.5070 Bite block. (a) Identification. A bite block...

21 CFR 882.5070 - Bite block.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Bite block. 882.5070 Section 882.5070 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Therapeutic Devices § 882.5070 Bite block. (a) Identification. A bite block...

Streptococcus oralis cerebral abscess following monkey bite in a 2-month-old infant.

PubMed

Thiagarajan, Srinivasan; Krishnamurthy, Sriram; Raghavan, Renitha; Mahadevan, Subramanian; Madhugiri, Venkatesh S; Sistla, Sujatha

2016-05-01

Although cerebral abscesses caused by animal bites have been reported, they are extremely rare in infants and have not been described following monkey bite. A 55-day-old male infant presented with a multi-loculated Streptococcus oralis cerebral abscess following a monkey bite on the scalp. There was a clinical response to antibiotic therapy and repeated surgical aspiration followed by a ventriculoperitoneal shunt. This is the first report of a patient with a brain abscess following a monkey bite.

Muscle Force-Velocity Relationships Observed in Four Different Functional Tests

PubMed Central

Zivkovic, Milena Z.; Djuric, Sasa; Cuk, Ivan; Suzovic, Dejan; Jaric, Slobodan

2017-01-01

Abstract The aims of the present study were to investigate the shape and strength of the force-velocity relationships observed in different functional movement tests and explore the parameters depicting force, velocity and power producing capacities of the tested muscles. Twelve subjects were tested on maximum performance in vertical jumps, cycling, bench press throws, and bench pulls performed against different loads. Thereafter, both the averaged and maximum force and velocity variables recorded from individual trials were used for force–velocity relationship modeling. The observed individual force-velocity relationships were exceptionally strong (median correlation coefficients ranged from r = 0.930 to r = 0.995) and approximately linear independently of the test and variable type. Most of the relationship parameters observed from the averaged and maximum force and velocity variable types were strongly related in all tests (r = 0.789-0.991), except for those in vertical jumps (r = 0.485-0.930). However, the generalizability of the force-velocity relationship parameters depicting maximum force, velocity and power of the tested muscles across different tests was inconsistent and on average moderate. We concluded that the linear force-velocity relationship model based on either maximum or averaged force-velocity data could provide the outcomes depicting force, velocity and power generating capacity of the tested muscles, although such outcomes can only be partially generalized across different muscles. PMID:28469742

Verified spider bites in Oregon (USA) with the intent to assess hobo spider venom toxicity.

PubMed

McKeown, Nathanael; Vetter, Richard S; Hendrickson, Robert G

2014-06-01

This study compiled 33 verified spider bites from the state of Oregon (USA). The initial goal was to amass a series of bites by the hobo spider to assess whether it possesses toxic venom, a supposition which is currently in a contested state. None of the 33 bites from several spider species developed significant medical symptoms nor did dermonecrosis occur. The most common biters were the yellow sac spider, Cheiracanthium mildei (N = 10) and orb-weavers of the genus Araneus (N = 6). There were 10 bites from three genera of funnel web spiders of the family Agelenidae including one hobo spider bite and one from the congeneric giant house spider which is readily confused as a hobo spider. The hobo spider bite resulted in pain, redness, twitching in the calf muscle and resolved in 12 h. Also generated from this study were possibly the first records of bites from spiders of the genera Callobius (Amaurobiidae) and Antrodiaetus (Antrodiaetidae), both with minor manifestations. Published by Elsevier Ltd.

A verified spider bite and a review of the literature confirm Indian ornamental tree spiders (Poecilotheria species) as underestimated theraphosids of medical importance.

PubMed

Fuchs, Joan; von Dechend, Margot; Mordasini, Raffaella; Ceschi, Alessandro; Nentwig, Wolfgang

2014-01-01

Literature on bird spider or tarantula bites (Theraphosidae) is rare. This is astonishing as they are coveted pets and interaction with their keepers (feeding, cleaning the terrarium or taking them out to hold) might increase the possibility for bites. Yet, this seems to be a rare event and might be why most theraphosids are considered to be harmless, even though the urticating hairs of many American species can cause disagreeable allergic reactions. We are describing a case of a verified bite by an Indian ornamental tree spider (Poecilotheria regalis), where the patient developed severe, long lasting muscle cramps several hours after the bite. We present a comprehensive review of the literature on bites of these beautiful spiders and conclude that a delayed onset of severe muscle cramps, lasting for days, is characteristic for Poecilotheria bites. We discuss Poecilotheria species as an exception from the general assumption that theraphosid bites are harmless to humans. Copyright © 2013 Elsevier Ltd. All rights reserved.

Comparison of cetirizine, ebastine and loratadine in the treatment of immediate mosquito-bite allergy.

PubMed

Karppinen, A; Kautiainen, H; Petman, L; Burri, P; Reunala, T

2002-06-01

People frequently experience whealing and delayed papules from mosquito bites. Whealing is mediated by antisaliva immunoglobulin (Ig)E antibodies and histamine. Cetirizine, ebastine and loratadine have earlier shown effects on mosquito-bite reactions but no comparative studies exist. A double-blind, placebo-controlled, cross-over study was performed with cetirizine 10 mg, ebastine 10 mg and loratadine 10 mg in 29 mosquito-bite-sensitive adults exposed to Aedes aegypti mosquito-bites. The size of the bite lesion and the intensity of pruritus (visual analog scale) were measured at 15 min and 2, 6 and 24 h. Cetirizine and ebastine, but not loratadine, decreased significantly the size of whealing (P < 0.01) and accompanying pruritus (P < 0.001) compared to placebo. Cetirizine was most effective on pruritus but caused more often sedation than ebastine or loratadine. The delayed bite symptoms remained too faint for any statistical comparison. This comparative study in mosquito-bite-sensitive adults shows that cetirizine and ebastine decrease significantly whealing and accompanying pruritus, and that cetirizine seems to be the most effective against pruritus.

Extensive unusual lesions on a large number of immersed human victims found to be from cookiecutter sharks (Isistius spp.): an examination of the Yemenia plane crash.

PubMed

Ribéreau-Gayon, Agathe; Rando, Carolyn; Schuliar, Yves; Chapenoire, Stéphane; Crema, Enrico R; Claes, Julien; Seret, Bernard; Maleret, Vincent; Morgan, Ruth M

2017-03-01

Accurate determination of the origin and timing of trauma is key in medicolegal investigations when the cause and manner of death are unknown. However, distinction between criminal and accidental perimortem trauma and postmortem modifications can be challenging when facing unidentified trauma. Postmortem examination of the immersed victims of the Yemenia airplane crash (Comoros, 2009) demonstrated the challenges in diagnosing extensive unusual circular lesions found on the corpses. The objective of this study was to identify the origin and timing of occurrence (peri- or postmortem) of the lesions.A retrospective multidisciplinary study using autopsy reports (n = 113) and postmortem digital photos (n = 3 579) was conducted. Of the 113 victims recovered from the crash, 62 (54.9 %) presented unusual lesions (n = 560) with a median number of 7 (IQR 3 ∼ 13) and a maximum of 27 per corpse. The majority of lesions were elliptic (58 %) and had an area smaller than 10 cm 2 (82.1 %). Some lesions (6.8 %) also showed clear tooth notches on their edges. These findings identified most of the lesions as consistent with postmortem bite marks from cookiecutter sharks (Isistius spp.). It suggests that cookiecutter sharks were important agents in the degradation of the corpses and thus introduced potential cognitive bias in the research of the cause and manner of death. A novel set of evidence-based identification criteria for cookiecutter bite marks on human bodies is developed to facilitate more accurate medicolegal diagnosis of cookiecutter bites.

Miniplate With a Bendable C-Tube Head Allows the Clinician to Alter Biomechanical Advantage in Extremely Complicated Anatomic Structure.

PubMed

Seo, Kyung Won; Iskenderoglu, Nur Serife; Hwang, Eui Hwan; Chung, Kyu-Rhim; Kim, Seong-Hun

2017-05-01

This article reports C-tube miniplates as a practical temporary anchorage device choice to treat open bite patients with maxillary sinus pneumatization. The C-tube components are titanium anchor plates and monocortical screws that are basically similar to any other miniplate systems, but it has the unique characteristic of the tube head to be malleable. The manipulation of the head part is easy due to the composition of pure titanium. The I-shaped C-tube with 3 holes and T-shaped C-tube miniplates were placed above the apices of maxillary molars as an absolute anchorage system to intrude the posterior maxilla. The bending of the tube heads assisted in reduction of severe open bite patient with maxillary sinus pneumatization. Sinus perforation during placement of skeletal anchorage system weakens stability of the anchorage and further cause complications. Placement of titanium C-tube miniplates allowed reliable skeletal anchorage and avoided maxillary sinus perforation in patients with extreme pneumatizations. Simple bending of C-tube miniplates ensured increased orthodontic intrusion force without having to replace them, and eliminated consequences such as perforation of maxillary sinus, sinusitis, soft tissue irritation, or infection. Anatomic difficulties in the placement of temporary anchorage device can be easily managed by using the bendable C-tube miniplate. It can serve as a great alternative over miniscrews or regular miniplates with reduced risk of sinus perforation and ability to bend the head portion to control orthodontic vectors and forces.

Structural biomechanics of the craniomaxillofacial skeleton under maximal masticatory loading: Inferences and critical analysis based on a validated computational model.

PubMed

Pakdel, Amir R; Whyne, Cari M; Fialkov, Jeffrey A

2017-06-01

The trend towards optimizing stabilization of the craniomaxillofacial skeleton (CMFS) with the minimum amount of fixation required to achieve union, and away from maximizing rigidity, requires a quantitative understanding of craniomaxillofacial biomechanics. This study uses computational modeling to quantify the structural biomechanics of the CMFS under maximal physiologic masticatory loading. Using an experimentally validated subject-specific finite element (FE) model of the CMFS, the patterns of stress and strain distribution as a result of physiological masticatory loading were calculated. The trajectories of the stresses were plotted to delineate compressive and tensile regimes over the entire CMFS volume. The lateral maxilla was found to be the primary vertical buttress under maximal bite force loading, with much smaller involvement of the naso-maxillary buttress. There was no evidence that the pterygo-maxillary region is a buttressing structure, counter to classical buttress theory. The stresses at the zygomatic sutures suggest that two-point fixation of zygomatic complex fractures may be sufficient for fixation under bite force loading. The current experimentally validated biomechanical FE model of the CMFS is a practical tool for in silico optimization of current practice techniques and may be used as a foundation for the development of design criteria for future technologies for the treatment of CMFS injury and disease. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Open bite in prematurely born children.

PubMed

Harila, V; Heikkinen, T; Grön, M; Alvesalo, L

2007-01-01

The aims of this study were to: examine the expression of open bite in prematurely born children and discuss the etiological factors that may lead to bite it. The subjects were 328 prematurely born (<37 gestational weeks) Caucasoid and African American children and 1,804 full-term control children, who participated in the cross-sectional study of the Collaborative Perinatal Project in the 1960s and 1970s. Dental documents, including casts and photographs, were taken once at the age of 6-12 years in the mixed dentition. The occlusion was recorded by examining and measuring the hard stone casts. Vertical open bite was recorded only for full erupted teeth. The statistical method used was chi-square analysis. Significant differences in the incidence of anterior open bite (from left to right canine) was found between the preterm and control groups and between gender and ethnic groups. The prevalence of anterior open bite was nearly 9% in the preterm group and almost 7% in the control group. African Americans (9%) had a significantly greater incidence of open bite than Caucasians (3%; P<.0001). Generally, girls had a greater incidence of open bite than boys (8% vs 6%; P<.11). When the study groups were divided by prematurity, gender, and ethnic group, the prevalence of open bite was increased--especially in preterm African American boys compared to controls (11% vs 8%). The results show differences in the development of anterior open bite between ethnic and gender groups. Premature birth may also influence dental occlusal development. Of importance are the patient's: general health condition; respiratory infections; inadequate nasal- and mouth-breathing; oral habits; and other medical problems. Preterm children may be relatively more predisposed to etiological factors for the development of anterior open bite.

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations.

PubMed

Garg, Arun; Waters, Thomas; Kapellusch, Jay; Karwowski, Waldemar

2014-03-01

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers. At present it is not clear whether pushing or pulling should be favored. Similarly, it is not clear what handle heights would be optimal for pushing and pulling. Epidemiological studies are needed to determine relationships between psychophysically determined maximum acceptable pushing and pulling forces and risk of musculoskeletal injuries, in particular to low back and shoulders.

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations

PubMed Central

Garg, Arun; Waters, Thomas; Kapellusch, Jay; Karwowski, Waldemar

2015-01-01

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers. At present it is not clear whether pushing or pulling should be favored. Similarly, it is not clear what handle heights would be optimal for pushing and pulling. Epidemiological studies are needed to determine relationships between psychophysically determined maximum acceptable pushing and pulling forces and risk of musculoskeletal injuries, in particular to low back and shoulders. PMID:26664045

The examination and identification of bite marks in foods using 3D scanning and 3D comparison methods.

PubMed

Naether, Silvio; Buck, Ursula; Campana, Lorenzo; Breitbeck, Robert; Thali, Michael

2012-01-01

Bite mark analysis offers the opportunity to identify the biter based on the individual characteristics of the dentitions. Normally, the main focus is on analysing bite mark injuries on human bodies, but also, bite marks in food may play an important role in the forensic investigation of a crime. This study presents a comparison of simulated bite marks in different kinds of food with the dentitions of the presumed biter. Bite marks were produced by six adults in slices of buttered bread, apples, different kinds of Swiss chocolate and Swiss cheese. The time-lapse influence of the bite mark in food, under room temperature conditions, was also examined. For the documentation of the bite marks and the dentitions of the biters, 3D optical surface scanning technology was used. The comparison was performed using two different software packages: the ATOS modelling and analysing software and the 3D studio max animation software. The ATOS software enables an automatic computation of the deviation between the two meshes. In the present study, the bite marks and the dentitions were compared, as well as the meshes of each bite mark which were recorded in the different stages of time lapse. In the 3D studio max software, the act of biting was animated to compare the dentitions with the bite mark. The examined food recorded the individual characteristics of the dentitions very well. In all cases, the biter could be identified, and the dentitions of the other presumed biters could be excluded. The influence of the time lapse on the food depends on the kind of food and is shown on the diagrams. However, the identification of the biter could still be performed after a period of time, based on the recorded individual characteristics of the dentitions.

Intramuscular fiber conduction velocity, isometric force and explosive performance.

PubMed

Methenitis, Spyridon; Terzis, Gerasimos; Zaras, Nikolaos; Stasinaki, Angeliki-Nikoletta; Karandreas, Nikolaos

2016-06-01

Conduction of electrical signals along the surface of muscle fibers is acknowledged as an essential neuromuscular component which is linked with muscle force production. However, it remains unclear whether muscle fiber conduction velocity (MFCV) is also linked with explosive performance. The aim of the present study was to investigate the relationship between vastus lateralis MFCV and countermovement jumping performance, the rate of force development and maximum isometric force. Fifteen moderately-trained young females performed countermovement jumps as well as an isometric leg press test in order to determine the rate of force development and maximum isometric force. Vastus lateralis MFCV was measured with intramuscular microelectrodes at rest on a different occasion. Maximum MFCV was significantly correlated with maximum isometric force (r = 0.66, p < 0.01), nevertheless even closer with the leg press rate of force development at 100 ms, 150 ms, 200 ms, and 250 ms (r = 0.85, r = 0.89, r = 0.91, r = 0.92, respectively, p < 0.01). Similarly, mean MFCV and type II MFCV were better correlated with the rate of force development than with maximum isometric leg press force. Lower, but significant correlations were found between mean MFCV and countermovement jump power (r = 0.65, p < 0.01). These data suggest that muscle fiber conduction velocity is better linked with the rate of force development than with isometric force, perhaps because conduction velocity is higher in the larger and fastest muscle fibers which are recognized to contribute to explosive actions.

Acute effects of jaw clenching using a customized mouthguard on anaerobic ability and ventilatory flows.

PubMed

Morales, Jose; Buscà, Bernat; Solana-Tramunt, Mònica; Miró, Adrià

2015-12-01

The latest findings on the ergogenic effects of a dentistry-design, bite-aligning mouthpiece require additional research to assess its impact on anaerobic ability and ventilatory parameters. This paper was aimed at determining the ergogenic acute effects of wearing a custom-made mouthpiece on oral airflow dynamics, 30-s Wingate Anaerobic Test performance parameters. Twenty-eight healthy and physically-active male subjects (age: 24.50 ± 3.32, height: 181.34 ± 7.4, weight: 78.14 ± 8.21), were voluntarily studied. The subjects were first briefed on the test protocols, and then performed the 30s Wingate test and Spirometer test. The experimental trials were performed in a random counterbalanced order. We evaluate maximum expiratory volume (VEmax L min(-1)), mean power (W kg(-1)), peak power (W kg(-1)), time to peak (s), rate to fatigue (Ws(-1)) and lactate production (mMol L(-1)), rate of perceived exertion (RPE). There were significant differences between mouthguard and no-mouthguard conditions in mean power (W kg(-1)), peak power (W kg(-1)), time to peak (s), and rate to fatigue (Ws(-1)) for the 30-s Wingate Anaerobic Test. Significantly lower lactate production (mMol L(-1)) was observed, in mouthguard condition but no significant differences were found in RPE. In airflow dynamics, the VEmax L min(-1) was significantly higher when comparing the mouthguard and the no mouthguard conditions in both forced and unforced conditions. In conclusion, wearing a customized mouthguard improves anaerobic ability and increases forced expiratory volume. This study will help practitioners improve athlete's performance in anaerobic activities where high intensity action might provoke jaw-clenching, contributing in reductions of lactate and fatigue, and improving ventilatory parameters. Copyright © 2015 Elsevier B.V. All rights reserved.

An investigation of rugby scrimmaging posture and individual maximum pushing force.

PubMed

Wu, Wen-Lan; Chang, Jyh-Jong; Wu, Jia-Hroung; Guo, Lan-Yuen

2007-02-01

Although rugby is a popular contact sport and the isokinetic muscle torque assessment has recently found widespread application in the field of sports medicine, little research has examined the factors associated with the performance of game-specific skills directly by using the isokinetic-type rugby scrimmaging machine. This study is designed to (a) measure and observe the differences in the maximum individual pushing forward force produced by scrimmaging in different body postures (3 body heights x 2 foot positions) with a self-developed rugby scrimmaging machine and (b) observe the variations in hip, knee, and ankle angles at different body postures and explore the relationship between these angle values and the individual maximum pushing force. Ten national rugby players were invited to participate in the examination. The experimental equipment included a self-developed rugby scrimmaging machine and a 3-dimensional motion analysis system. Our results showed that the foot positions (parallel and nonparallel foot positions) do not affect the maximum pushing force; however, the maximum pushing force was significantly lower in posture I (36% body height) than in posture II (38%) and posture III (40%). The maximum forward force in posture III (40% body height) was also slightly greater than for the scrum in posture II (38% body height). In addition, it was determined that hip, knee, and ankle angles under parallel feet positioning are factors that are closely negatively related in terms of affecting maximum pushing force in scrimmaging. In cross-feet postures, there was a positive correlation between individual forward force and hip angle of the rear leg. From our results, we can conclude that if the player stands in an appropriate starting position at the early stage of scrimmaging, it will benefit the forward force production.

Evaluation of recovery in lip closing pressure and occlusal force and contact area after orthognathic surgery.

PubMed

Ueki, Koichiro; Moroi, Akinori; Sotobori, Megumi; Ishihara, Yuri; Marukawa, Kohei; Iguchi, Ran; Kosaka, Akihiko; Ikawa, Hiroumi; Nakazawa, Ryuichi; Higuchi, Masatoshi

2014-10-01

The purpose of this study was to evaluate the relationship between lip closing force, occlusal contact area and occlusal force after orthognathic surgery in skeletal Class III patients. The subjects consisted of 54 patients (28 female and 26 male) diagnosed with mandibular prognathism who underwent sagittal split ramus osteotomy with and without Le Fort I osteotomy. Maximum and minimum lip closing forces, occlusal contact area and occlusal force were measured pre-operatively, 6 months and 1 year post-operative. Maximum and minimum lip closing forces, occlusal contact area and occlusal force increased with time after surgery, however a significant increase was not found in the occlusal contact area in women. In increased ratio (6 months/pre-operative and 1 year/pre-operative), the maximum lip closing force was significantly correlated with the occlusal contact area (P < 0.0001). This study suggested that orthognathic surgery could improve the occlusal force, contact area and lip closing force, and an increase ratio in maximum lip closing force was associated with an increased ratio in occlusal contact area. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Limitations to maximum running speed on flat curves.

PubMed

Chang, Young-Hui; Kram, Rodger

2007-03-01

Why is maximal running speed reduced on curved paths? The leading explanation proposes that an increase in lateral ground reaction force necessitates a decrease in peak vertical ground reaction force, assuming that maximum leg extension force is the limiting factor. Yet, no studies have directly measured these forces or tested this critical assumption. We measured maximum sprint velocities and ground reaction forces for five male humans sprinting along a straight track and compared them to sprints along circular tracks of 1, 2, 3, 4 and 6 m radii. Circular track sprint trials were performed either with or without a tether that applied centripetal force to the center of mass. Sprinters generated significantly smaller peak resultant ground reaction forces during normal curve sprinting compared to straight sprinting. This provides direct evidence against the idea that maximum leg extension force is always achieved and is the limiting factor. Use of the tether increased sprint speed, but not to expected values. During curve sprinting, the inside leg consistently generated smaller peak forces compared to the outside leg. Several competing biomechanical constraints placed on the stance leg during curve sprinting likely make the inside leg particularly ineffective at generating the ground reaction forces necessary to attain maximum velocities comparable to straight path sprinting. The ability of quadrupeds to redistribute function across multiple stance legs and decouple these multiple constraints may provide a distinct advantage for turning performance.

Polymicrobial tenosynovitis with Pasteurella multocida and other Gram negative bacilli after a Siberian tiger bite

PubMed Central

Isotalo, P; Edgar, D; Toye, B

2000-01-01

Mammalian bites present a considerable clinical problem because they are often associated with bacterial infections. Pasteurella multocida is a microorganism that commonly infects both canine and small feline bites. Zoonotic infections developing after large feline bites have been recognised, although their reports are limited. We describe a 35 year old man who was bitten by a Siberian tiger and who developed infectious tenosynovitis secondary to P multocida, Bergeyella (Weeksella) zoohelcum, and Gram negative bacteria most like CDC group EF-4b and comamonas species. The latter three bacteria have not been isolated previously from large feline bite wounds. Key Words: animal bite • zoonotic infection • Pasteurella multocida • Bergeyella zoohelcum PMID:11127273

[Mammal bite management].

PubMed

Contreras-Marín, Misael; Sandoval-Rodríguez, Jorge Issac; García-Ramírez, Raúl; Morales-Yépez, Héctor Adolfo

Animal bites are a major public health problem, it is estimated that 2% of the population is bitten each year. Most bites are by dogs and the risk factors include young children, men, certain breeds of dogs and untrained dogs. The risk of infection after bites differs between animal species and depends on the animal teeth and oral flora. Animal bites are still a major cause of morbidity in patients of all ages and have caused several preventable childhood deaths. These wounds often become infected. If the wound requires it, early surgical evaluation must be performed. The use of antibiotics is only recommended for high risk bite wounds. Copyright © 2016 Academia Mexicana de Cirugía A.C. Publicado por Masson Doyma México S.A. All rights reserved.

Computer-aided axiography of asymptomatic individuals with Class II/2.

PubMed

Stamm, T; Vehring, A; Ehmer, U; Bollmann, F

1998-01-01

The condylar axiographic tracings of 23 asymptomatic adult volunteers (Helkimo-index DiO) with Class II/2 axiography relationships were compared to tracings of an analogous group (DiO; n = 30) with normal occlusion. The obtained measurements were evaluated statistically and discussed with respect to possible recording errors. The open-close movement proceeded uncharacteristically, differences existed only in protrusion, mediotrusion and their combined rotation component. In Class II/2 cases an approximately 7 degrees higher angle of the condylar path inclination (CPI) was measured. The Class II/2 group rotated to a significantly higher angle in protrusive and mediotrusive movements and showed longer condylar path lengths than the control group. Another significant difference was found in the location of maximum CPI values and maximum rotation angles within the condylar path, because in no case was isolated rotation or translation of the hinge axis observed. The temporomandibular joint of Class II/2 individuals shows a wider range of motion than joints of subjects with normal occlusion. The reduced capacity of motion which was assumed to exist in a so-called hack-bite could not be backed up for Class II/2 deep bite cases. The investigated differences cannot be seen as pathomechanisms, because all participants were clinically free of dysfunction. The neuromuscular engram to overcome the overbite controls a complex spatial motion pattern which cannot be described by a simplified mechanical abstraction of motion in the sagittal plane. The temporomandibular joint with its complex pattern of movement is able to create physiological mechanisms of compensation to react to different dental and skeletal features.

Inferring the Diets of Extinct Giant Lemurs from Osteological Correlates of Muscle Dimensions.

PubMed

Perry, Jonathan M G

2018-02-01

The jaw adductor muscles of extinct mammals are often reconstructed to elucidate paleoecological relationships and to make broad comparisons among taxa. Muscle lever arms, bite load arms, muscle dimensions, and gape are often also reconstructed to better understand feeding. Several different approaches to these and related goals are discussed here. A protocol for reconstructing muscle dimensions and bite force using biomechanically informative skull measurements and osteological proxies of muscle dimensions is described and applied to a case study of subfossil Malagasy lemurs. The results of this case study show that most subfossil lemurs emphasized the masseter and medial pterygoid muscles over the temporalis. This supports the inference that these extinct lemurs depended heavily on tough food like leaves. Exceptions include signals of hard-object feeding in Archaeolemur that vary between A. majori and A. edwardsi. Reconstructions of soft-tissue and function are important for understanding past ecological relationships. Even those based on well-supported osteological proxies from extant analogues have limitations for making precise inferences. Anat Rec, 301:343-362, 2018. © 2018 Wiley Periodicals, Inc. © 2018 Wiley Periodicals, Inc.

Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.

PubMed

Kim, Dae-Min; Kong, Yong-Ku

2016-12-01

A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.

Nonhealing Wounds Caused by Brown Spider Bites: Application of Hyperbaric Oxygen Therapy.

PubMed

Hadanny, Amir; Fishlev, Gregory; Bechor, Yair; Meir, Oshra; Efrati, Shai

2016-12-01

Bites by Loxosceles spiders (also known as recluse spiders or brown spiders) can cause necrotic ulcerations of various sizes and dimensions. The current standard of care for brown spider bites includes analgesics, ice, compression, elevation, antihistamines, and surgical debridement. Hyperbaric oxygen therapy (HBOT) in the treatment of brown spider bites has been administered in the early stage of ulceration, or 2 to 6 days after the bite. Unfortunately, the diagnosis of spider bite-related ulcers is often delayed and weeks or months may elapse before HBOT is considered. To evaluate the effect of HBOT on nonhealing wounds caused by brown spider bites in the late, chronic, nonhealing stage. Analysis of 3 patients with brown spider-bite healing wounds treated at The Sagol Center for Hyperbaric Medicine and Research in Israel. Patients presented 2 to 3 months after failure of other therapies including topical dressings, antibiotics, and corticosteroids. All patients were treated with daily 2 ATA (atmospheres absolute) with 100% oxygen HBOT sessions. All 3 patients were previously healthy without any chronic disease. Their ages were 30, 42, and 73 years. They were treated once daily for 13, 17, and 31 sessions, respectively. The wounds of all 3 patients healed, and there was no need for additional surgical intervention. There were no significant adverse events in any of the patients. Microvascular injury related to brown spider bites may culminate in ischemic nonhealing wounds even in a relatively young, healthy population. Hyperbaric oxygen therapy should be considered as a valuable therapeutic tool even months after the bite.

Factors associated with anterior open bite in children with developmental disabilities.

PubMed

de Castilho, Lia Silva; Abreu, Mauro Henrique Nogueira Guimarães; Pires E Souza, Luiz Gustavo de Almeida; Romualdo, Leiliane Teresinha de Almeida; Souza E Silva, Maria Elisa; Resende, Vera Lúcia Silva

2018-01-01

To investigate factors associated with anterior open bite in individuals aged from 2 to 33 years with developmental disabilities. This is a cross-sectional study. A total of 271 dental records were examined. The anterior open bite analyzed was determined based on clinic exam. These variables were also analyzed: gender, age, education level of mother, International Code of Diseases (ICD), mouth breathing, use of anticonvulsant drugs, hyperkinesis, pacifier use, thumb sucking, seizure, and involuntary movements. For the purposes of analysis, the individuals were categorized as being with and without anterior open bite. Variables with a p-value of < 0.25 in the bivariate analysis were incorporated into the logistic regression models. Mouth breathers had a 2.60-fold (95% CI: 1.35-5.01) greater chance of exhibiting anterior open bite than nasal breathers. Pacifier users are more likely to have an anterior open bite (3.32-fold, 95% CI: 1.62-6.77). Individuals with reported involuntary movements had a 2.66-fold (95% CI: 1.26-5.63) greater chance of exhibiting anterior open bite. Users of anticonvulsants drugs had a 3.05 (95% CI: 1.57-5.92) greater chance of showing anterior open bite. Involuntary movements, mouth breathing, using anticonvulsant drugs, and using pacifier are factors associated with anterior open bite in patients with developmental disabilities. © 2017 Special Care Dentistry Association and Wiley Periodicals, Inc.

Determination of the Maximum Control Forces and Attainable Quickness in the Operation of Airplane Controls

NASA Technical Reports Server (NTRS)

Hertel, Heinrich

1930-01-01

This report is intended to furnish bases for load assumptions in the designing of airplane controls. The maximum control forces and quickness of operation are determined. The maximum forces for a strong pilot with normal arrangement of the controls is taken as 1.25 times the mean value obtained from tests with twelve persons. Tests with a number of persons were expected to show the maximum forces that a man of average strength can exert on the control stick in operating the elevator and ailerons and also on the rudder bar. The effect of fatigue, of duration and of the nature (static or dynamic) of the force, as also the condition of the test subject (with or without belt) were also considered.

Cheek-biting disorder: another stereotypic movement disorder?

PubMed

Sarkhel, Sujit; Praharaj, Samir Kumar; Akhtar, Sayeed

2011-12-01

Recurrent cheek biting, a form of self-injurious behavior is a rare entity which presents mostly to dentists and dermatologists. We report a case of recurrent severe cheek biting in an adult male leading to mucosal ulceration. The stereotypic pattern of cheek biting and associated behavior bears striking resemblance to other impulse control disorders. Copyright © 2011 Elsevier Ltd. All rights reserved.

Comparative evaluation of light-trap catches, electric motor mosquito catches and human biting catches of Anopheles in the Three Gorges Reservoir.

PubMed

Duo-quan, Wang; Lin-hua, Tang; Zhen-cheng, Gu; Xiang, Zheng; Man-ni, Yang; Wei-kang, Jiang

2012-01-01

The mosquito sampling efficiency of light-trap catches and electric motor mosquito catches were compared with that of human biting catches in the Three Gorges Reservoir. There was consistency in the sampling efficiency between light-trap catches and human biting catches for Anopheles sinensis (r = 0.82, P<0.01) and light-trap catches were 1.52 (1.35-1.71) times that of human biting catches regardless of mosquito density (r = 0.33, P>0.01), while the correlation between electric motor mosquito catches and human biting catches was found to be not statistically significant (r = 0.43, P>0.01) and its sampling efficiency was below that of human biting catches. It is concluded that light-traps can be used as an alternative to human biting catches of Anopheles sinensis in the study area and is a promising tool for sampling malaria vector populations.

Comparative Evaluation of Light-Trap Catches, Electric Motor Mosquito Catches and Human Biting Catches of Anopheles in the Three Gorges Reservoir

PubMed Central

Duo-quan, Wang; Lin-hua, Tang; Zhen-cheng, Gu; Xiang, Zheng; Man-ni, Yang; Wei-kang, Jiang

2012-01-01

The mosquito sampling efficiency of light-trap catches and electric motor mosquito catches were compared with that of human biting catches in the Three Gorges Reservoir. There was consistency in the sampling efficiency between light-trap catches and human biting catches for Anopheles sinensis (r = 0.82, P<0.01) and light-trap catches were 1.52 (1.35–1.71) times that of human biting catches regardless of mosquito density (r = 0.33, P>0.01), while the correlation between electric motor mosquito catches and human biting catches was found to be not statistically significant (r = 0.43, P>0.01) and its sampling efficiency was below that of human biting catches. It is concluded that light-traps can be used as an alternative to human biting catches of Anopheles sinensis in the study area and is a promising tool for sampling malaria vector populations. PMID:22235256

The impact of snake bite on household economy in Bangladesh.

PubMed

Hasan, S M K; Basher, A; Molla, A A; Sultana, N K; Faiz, M A

2012-01-01

The present study aims to assess the different types of costs for treatment of snake bite patients, to quantify household economic impact and to understand the coping mechanisms required to cover the costs for snake bite patients in Bangladesh. The patients admitted to four tertiary level hospitals in Bangladesh were interviewed using structured questionnaires including health-care-related expenditures and the way in which the expenditures were covered. Of the snakes which bit the patients, 54.2% were non-venomous, 45.8% were venomous and 42.2% of the patients were given polyvalent antivenom. The total expenditure related to snake bite varies from US$4 (US$1 = Taka 72) to US$2294 with a mean of US$124 and the mean income loss was US$93. Expenditure for venomous snake bite was US$231, which is about seven times higher than non-venomous snake bite (US$34). The treatment imposes a major economic burden on affected families, especially in venomous snake bite cases.

Effect of bending stiffness on the peeling behavior of an elastic thin film on a rigid substrate.

PubMed

Peng, Zhilong; Chen, Shaohua

2015-04-01

Inspired by the experimental observation that the maximum peeling force of elastic films on rigid substrates does not always emerge at the steady-state peeling stage, but sometimes at the initial one, a theoretical model is established in this paper, in which not only the effect of the film's bending stiffness on the peeling force is considered, but also the whole peeling process, from the initiation of debonding to the steady-state stage, is characterized. Typical peeling force-displacement curves and deformed profiles of the film reappear for the whole peeling process. For the case of a film with relatively large bending stiffness, the maximum peeling force is found arising at the initial peeling stage and the larger the stiffness of the film, the larger the maximum peeling force is. With the peeling distance increasing, the peeling force is reduced from the maximum to a constant at the steady-state stage. For the case of a film with relatively small stiffness, the peeling force increases monotonically at the initial stage and then achieves a constant as the maximum at the steady-state stage. Furthermore, the peeling forces in the steady-state stage are compared with those of the classical Kendall model. All the theoretical predictions agree well with the existing experimental and numerical observations, from which the maximum peeling force can be predicted precisely no matter what the stiffness of the film is. The results in this paper should be very helpful in the design and assessment of the film-substrate interface.

Detection of residual disease after neoadjuvant chemoradiotherapy for oesophageal cancer (preSANO): a prospective multicentre, diagnostic cohort study.

PubMed

Noordman, Bo Jan; Spaander, Manon C W; Valkema, Roelf; Wijnhoven, Bas P L; van Berge Henegouwen, Mark I; Shapiro, Joël; Biermann, Katharina; van der Gaast, Ate; van Hillegersberg, Richard; Hulshof, Maarten C C M; Krishnadath, Kausilia K; Lagarde, Sjoerd M; Nieuwenhuijzen, Grard A P; Oostenbrug, Liekele E; Siersema, Peter D; Schoon, Erik J; Sosef, Meindert N; Steyerberg, Ewout W; van Lanschot, J Jan B

2018-05-31

After neoadjuvant chemoradiotherapy for oesophageal cancer, roughly half of the patients with squamous cell carcinoma and a quarter of those with adenocarcinoma have a pathological complete response of the primary tumour before surgery. Thus, the necessity of standard oesophagectomy after neoadjuvant chemoradiotherapy should be reconsidered for patients who respond sufficiently to neoadjuvant treatment. In this study, we aimed to establish the accuracy of detection of residual disease after neoadjuvant chemoradiotherapy with different diagnostic approaches, and the optimal combination of diagnostic techniques for clinical response evaluations. The preSANO trial was a prospective, multicentre, diagnostic cohort study at six centres in the Netherlands. Eligible patients were aged 18 years or older, had histologically proven, resectable, squamous cell carcinoma or adenocarcinoma of the oesophagus or oesophagogastric junction, and were eligible for potential curative therapy with neoadjuvant chemoradiotherapy (five weekly cycles of carboplatin [area under the curve 2 mg/mL per min] plus paclitaxel [50 mg/m 2 of body-surface area] combined with 41·4 Gy radiotherapy in 23 fractions) followed by oesophagectomy. 4-6 weeks after completion of neoadjuvant chemoradiotherapy, patients had oesophagogastroduodenoscopy with biopsies and endoscopic ultrasonography with measurement of maximum tumour thickness. Patients with histologically proven locoregional residual disease or no-pass during endoscopy and without distant metastases underwent immediate surgical resection. In the remaining patients a second clinical response evaluation was done (PET-CT, oesophagogastroduodenoscopy with biopsies, endoscopic ultrasonography with measurement of maximum tumour thickness, and fine-needle aspiration of suspicious lymph nodes), followed by surgery 12-14 weeks after completion of neoadjuvant chemoradiotherapy. The primary endpoint was the correlation between clinical response during clinical response evaluations and the final pathological response in resection specimens, as shown by the proportion of tumour regression grade (TRG) 3 or 4 (>10% residual carcinoma in the resection specimen) residual tumours that was missed during clinical response evaluations. This study was registered with the Netherlands Trial Register (NTR4834), and has been completed. Between July 22, 2013, and Dec 28, 2016, 219 patients were included, 207 of whom were included in the analyses. Eight of 26 TRG3 or TRG4 tumours (31% [95% CI 17-50]) were missed by endoscopy with regular biopsies and fine-needle aspiration. Four of 41 TRG3 or TRG4 tumours (10% [95% CI 4-23]) were missed with bite-on-bite biopsies and fine-needle aspiration. Endoscopic ultrasonography with maximum tumour thickness measurement missed TRG3 or TRG4 residual tumours in 11 of 39 patients (28% [95% CI 17-44]). PET-CT missed six of 41 TRG3 or TRG4 tumours (15% [95% CI 7-28]). PET-CT detected interval distant histologically proven metastases in 18 (9%) of 190 patients (one squamous cell carcinoma, 17 adenocarcinomas). After neoadjuvant chemoradiotherapy for oesophageal cancer, clinical response evaluation with endoscopic ultrasonography, bite-on-bite biopsies, and fine-needle aspiration of suspicious lymph nodes was adequate for detection of locoregional residual disease, with PET-CT for detection of interval metastases. Active surveillance with this combination of diagnostic modalities is now being assessed in a phase 3 randomised controlled trial (SANO trial; Netherlands Trial Register NTR6803). Dutch Cancer Society. Copyright © 2018 Elsevier Ltd. All rights reserved.

Human bites (image)

MedlinePlus

Human bites present a high risk of infection. Besides the bacteria which can cause infection, there is ... the wound extends below the skin. Anytime a human bite has broken the skin, seek medical attention.

Force-displacement differences in the lower extremities of young healthy adults between drop jumps and drop landings.

PubMed

Hackney, James M; Clay, Rachel L; James, Meredith

2016-10-01

We measured ground reaction force and lower extremity shortening in ten healthy, young adults in order to compare five trials of drop jumps to drop landings. Our dependent variable was the percentage of displacement (shortening) between the markers on the ASIS and second metatarsal heads on each LE, relative to the maximum shortening (100% displacement) for that trial at the point of greatest ground reaction force. We defined this as "percent displacement at maximum force" (%dFmax). The sample mean %dFmax was 0.73%±0.14% for the drop jumps, and 0.47%±0.09% for the drop landings. The mean within-subject difference score was 0.26%±0.20%. Two-tailed paired t test comparing %dFmax between the drop jump and drop landing yielded P=0.002. For all participants in this study, the %dFmax was greater in drop jumps than in drop landings. This indicates that in drop jumps, the point of maximum force and of maximum shortening was nearly simultaneous, compared to drop landings, where the point of maximum shortening followed that of maximum force by a greater proportion. This difference in force to displacement behavior is explained by linear spring behavior in drop jumps, and linear damping behavior in drop landings. Copyright © 2016 Elsevier B.V. All rights reserved.

How many people have been bitten by dogs? A cross-sectional survey of prevalence, incidence and factors associated with dog bites in a UK community.

PubMed

Westgarth, Carri; Brooke, Megan; Christley, Robert M

2018-04-01

Dog bite studies are typically based on hospital records and may be biased towards bites requiring significant medical treatment. This study investigated true dog bite prevalence and incidence at a community-level and victim-related risk factors, in order to inform policy and prevention. A cross-sectional study of a community of 1280 households in Cheshire, UK, surveyed 694 respondents in 385 households. Data included dog ownership and bite history, demographics, health and personality (Ten Item Personality Inventory (TIPI) brief measure). Multivariable logistic regression modelled risk factors for having ever been bitten by a dog, accounting for clustering of individuals within households. A quarter of participants (24.78%, 95% CI 21.72 to 28.13) reported having ever been bitten by a dog during their lifetime, with only a third of bites described requiring further medical treatment and 0.6% hospital admission. Incidence of dog bites was 18.7 (11.0-31.8) per 1000 population per year. Males were 1.81 times more likely to have been bitten in their lifetime than females (95% CI 1.20 to 2.72, P=0.005). Current owners of multiple dogs were 3.3 times more likely (95% CI 1.13 to 9.69, P=0.03) to report having been bitten than people not currently owning a dog. Regarding all bites described, most commonly people were bitten by a dog that they had never met before the incident (54.7%). Individuals scoring higher in emotional stability had a lower risk of having ever been bitten (OR=0.77 for 1 point change in scale between 1 and 7, 95% CI 0.66 to 0.9, P=0.001). This study suggests that the real burden of dog bites is considerably larger than those estimated from hospital records. Further, many bites do not require medical treatment and hospital-based bite data are not representative of bites within the wider population. Victim personality requires further investigation and potential consideration in the design of bite prevention schemes. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Improved single- and multi-contact life-time testing of dental restorative materials using key characteristics of the human masticatory system and a force/position-controlled robotic dental wear simulator.

PubMed

Raabe, D; Harrison, A; Ireland, A; Alemzadeh, K; Sandy, J; Dogramadzi, S; Melhuish, C; Burgess, S

2012-03-01

This paper presents a new in vitro wear simulator based on spatial parallel kinematics and a biologically inspired implicit force/position hybrid controller to replicate chewing movements and dental wear formations on dental components, such as crowns, bridges or a full set of teeth. The human mandible, guided by passive structures such as posterior teeth and the two temporomandibular joints, moves with up to 6 degrees of freedom (DOF) in Cartesian space. The currently available wear simulators lack the ability to perform these chewing movements. In many cases, their lack of sufficient DOF enables them only to replicate the sliding motion of a single occlusal contact point by neglecting rotational movements and the motion along one Cartesian axis. The motion and forces of more than one occlusal contact points cannot accurately be replicated by these instruments. Furthermore, the majority of wear simulators are unable to control simultaneously the main wear-affecting parameters, considering abrasive mechanical wear, which are the occlusal sliding motion and bite forces in the constraint contact phase of the human chewing cycle. It has been shown that such discrepancies between the true in vivo and the simulated in vitro condition influence the outcome and the quality of wear studies. This can be improved by implementing biological features of the human masticatory system such as tooth compliance realized through the passive action of the periodontal ligament and active bite force control realized though the central nervous system using feedback from periodontal preceptors. The simulator described in this paper can be used for single- and multi-occlusal contact testing due to its kinematics and ability to exactly replicate human translational and rotational mandibular movements with up to 6 DOF without neglecting movements along or around the three Cartesian axes. Recorded human mandibular motion and occlusal force data are the reference inputs of the simulator. Experimental studies of wear using this simulator demonstrate that integrating the biological feature of combined force/position hybrid control in dental material testing improves the linearity and reduces the variability of results. In addition, it has been shown that present biaxially operated dental wear simulators are likely to provide misleading results in comparative in vitro/in vivo one-contact studies due to neglecting the occlusal sliding motion in one plane which could introduce an error of up to 49% since occlusal sliding motion D and volumetric wear loss V(loss) are proportional.

Funnel-web spider bite

MedlinePlus

... page: //medlineplus.gov/ency/article/002844.htm Funnel-web spider bite To use the sharing features on ... the effects of a bite from the funnel-web spider. Male funnel-web spiders are more poisonous ...

The Effect of Psychological State and Social Support on Nail-Biting in Adolescents: An Exploratory Study

ERIC Educational Resources Information Center

Sisman, Fatma Nevin; Tok, Ozlem; Ergun, Ayse

2017-01-01

Nail-biting is one of the most common behavioral problems in children. This study aimed to examine factors affecting nail-biting among adolescents and the effects of psychological state and social support on nail-biting. This cross-sectional study was conducted between January and May of 2014 in seven schools in Istanbul (N = 724). Data were…

The management of bite wounds in children--a retrospective analysis at a level I trauma centre.

PubMed

Jaindl, Manuela; Grünauer, Judith; Platzer, Patrick; Endler, Georg; Thallinger, Christiane; Leitgeb, Johannes; Kovar, Florian M

2012-12-01

Animal bite wounds are a significant problem, which have caused several preventable child deaths in clinical practice in the past. The majority of bite wounds is caused by dogs and cats, and also humans have to be considered to lead to those extreme complicated diagnosis in the paediatric patient population. Early estimation of infection risk, adequate antibiotic therapy and, if indicated, surgical treatment, are cornerstones of successful cures of bite wounds. However, antibiotic prophylaxis and wound management are discussed controversially in the current literature. In our study, we retrospectively investigated the bite source, infection risk and treatment options of paediatric bite wounds. A total of 1592 paediatric trauma patients were analysed over a period of 19 years in this retrospective study at a level I trauma centre, Department of Trauma Surgery, Medical University of Vienna, Austria. Data for this study were obtained from our electronic patient records and follow-up visits. In our database, all paediatric patients triaged to our major urban trauma centre have been entered retrospectively. During the 19-year study period, 1592 paediatric trauma patients met the inclusion criteria. The mean age was 7.7 years (range 0-18.9), 878 (55.2%) were males and 714 (44.8%) were females. In our study population, a total of 698 dog bites (43.8%), 694 human bites (43.6%), 138 other bites (8.7%) and 62 cat bites (3.9%) have been observed. A total of 171 wounds (10.7%) have been infected. Surgical intervention was done in 27 wounds (1.7%). Gender-related incidence in bite wounds for dog and cat could be detected. Second, our findings for originator of bite wounds reflect the findings in the published literature. Total infection rate reached 10.7%, primary antibiotic therapy was administered in 221 cases (13.9%) and secondary antibiotic therapy in 20 (1.3%) cases. Observed infection rate of punctured wounds and wounds greater than 3 cm was 3 times higher than for all other wounds. Our findings need to be proven in further prospective clinical trials. Copyright © 2012 Elsevier Ltd. All rights reserved.

Geographic Variation in Access to Dog-Bite Care in Pakistan and Risk of Dog-Bite Exposure in Karachi: Prospective Surveillance Using a Low-Cost Mobile Phone System

PubMed Central

Zaidi, Syed Mohammad Asad; Labrique, Alain B.; Khowaja, Saira; Lotia-Farrukh, Ismat; Irani, Julia; Salahuddin, Naseem; Khan, Aamir Javed

2013-01-01

Background Dog-bites and rabies are under-reported in developing countries such as Pakistan and there is a poor understanding of the disease burden. We prospectively collected data utilizing mobile phones for dog-bite and rabies surveillance across nine emergency rooms (ER) in Pakistan, recording patient health-seeking behaviors, access to care and analyzed spatial distribution of cases from Karachi. Methodology and Principal Findings A total of 6212 dog-bite cases were identified over two years starting in February 2009 with largest number reported from Karachi (59.7%), followed by Peshawar (13.1%) and Hyderabad (11.4%). Severity of dog-bites was assessed using the WHO classification. Forty percent of patients had Category I (least severe) bites, 28.1% had Category II bites and 31.9% had Category III (most severe bites). Patients visiting a large public hospital ER in Karachi were least likely to seek immediate healthcare at non-medical facilities (Odds Ratio = 0.20, 95% CI 0.17–0.23, p-value<0.01), and had shorter mean travel time to emergency rooms, adjusted for age and gender (32.78 min, 95% CI 31.82–33.78, p-value<0.01) than patients visiting hospitals in smaller cities. Spatial analysis of dog-bites in Karachi suggested clustering of cases (Moran's I = 0.02, p value<0.01), and increased risk of exposure in particular around Korangi and Malir that are adjacent to the city's largest abattoir in Landhi. The direct cost of operating the mHealth surveillance system was USD 7.15 per dog-bite case reported, or approximately USD 44,408 over two years. Conclusions Our findings suggest significant differences in access to care and health-seeking behaviors in Pakistan following dog-bites. The distribution of cases in Karachi was suggestive of clustering of cases that could guide targeted disease-control efforts in the city. Mobile phone technologies for health (mHealth) allowed for the operation of a national-level disease reporting and surveillance system at a low cost. PMID:24349590

Epidemiology, clinical features and risk factors for human rabies and animal bites during an outbreak of rabies in Maputo and Matola cities, Mozambique, 2014: Implications for public health interventions for rabies control.

PubMed

Salomão, Cristolde; Nacima, Amílcar; Cuamba, Lutero; Gujral, Lorna; Amiel, Olga; Baltazar, Cynthia; Cliff, Julie; Gudo, Eduardo Samo

2017-07-01

In Mozambique, the majority of rabies outbreaks are unreported and data on the epidemiological features of human rabies and animal bites are scarce. An outbreak of human rabies in adjacent Maputo and Matola cities in 2014 prompted us to investigate the epidemiology, clinical features and risk factors of human rabies and animal bites in the two cities. We reviewed cases of human rabies and animal bites from April to July 2014, and carried out a community investigation in July and August in the neighborhoods where cases of human rabies resided. This investigation included collection of clinical, demographic and epidemiological information and a case control study to investigate the risk factors associated with human rabies. Fourteen cases of human rabies were detected in Maputo (n = 10) and Matola (n = 3) cities and neighbouring Boane district (n = 1) between April and August 2014, all of whom had been admitted to hospital. All had a recent history of dog bite. Of the 14 rabid dogs, only one had been immunized. 819 cases of animal bites were registered, of which 64.6% (529/819) were from Maputo City. Dogs were responsible for 97.8% (801/819) of all animal bites, but only 27.0% (126/467) were immunized. Factors significantly associated with human rabies were: age <15 years (p = 0.05), bite by stray dog (p = 0.002), deep wound (p = 0.02), bite in the head (p = 0.001), bite by unimmunized dog (p = 0.01), no use of soap and water (p = 0.001), and no post-exposure prophylaxis (p = 0.01). Implementation of control measures for rabies is poor in Maputo and Matola cities, where cases of human rabies were strongly associated with bites by stray and unvaccinated dogs and irregular implementation of post-exposure measures.

California Sea Lion (Zalophus californianus) and Harbor Seal (Phoca vitulina richardii) Bites and Contact Abrasions in Open-Water Swimmers: A Series of 11 Cases.

PubMed

Nuckton, Thomas J; Simeone, Claire A; Phelps, Roger T

2015-12-01

To review cases of bites and contact abrasions in open-water swimmers from California sea lions (Zalophus californianus) and harbor seals (Phoca vitulina richardii). Open-water swimmers from a San Francisco swimming club were questioned about encounters with pinnipeds (seals and sea lions) that resulted in bites or contact abrasions. When possible, wounds were documented with photographs. Medical follow-up and treatment complications were also reviewed. From October 2011 to December 2014, 11 swimmers reported bites by a sea lion (n = 1), harbor seal (n = 7), or unidentified pinniped (n = 3). Ten of the encounters occurred in San Francisco Bay; 1 occurred in the Eld Inlet, in Puget Sound, near Olympia, WA. None of the swimmers were wearing wetsuits. All bites involved the lower extremities; skin was broken in 4 of 11 bites and antibiotics were prescribed in 3 cases. One swimmer, who was bitten by a harbor seal, also had claw scratches. A treatment failure occurred with amoxicillin/clavulanate in another swimmer who was bitten by an unidentified pinniped; the wound healed subsequently with doxycycline, suggesting an infection with Mycoplasma spp. There were no long-lasting consequences from any of the bites. The majority of cases occurred at low tide, and bumping of the swimmer by the animal before or after a bite was common, but no clear tide or attack pattern was identified. Bites and contact abrasions from sea lions and harbor seals are reported infrequently in open-water swimmers and typically involve the lower extremities. Because of the risk of Mycoplasma infection, treatment with a tetracycline is recommended in pinniped bites with signs of infection or serious trauma. Attempting to touch or pet sea lions or seals is inadvisable and prohibited by the Marine Mammal Protection Act. Swimmers should leave the water as soon as possible after a bite or encounter. Copyright © 2015 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

An evaluation of rabies vaccination rates among canines and felines involved in biting incidents within the Wellington-Dufferin-Guelph Public Health Department.

PubMed

Bottoms, K; Trotz-Williams, L; Hutchison, S; MacLeod, J; Dixon, J; Berke, O; Poljak, Z

2014-11-01

The objectives of this study were to determine the rate of animal bite incidents occurring in the human population of a local health department, and to determine the proportion of these canines and felines that were not up to date on their rabies vaccination at the time the incident occurred. Data were obtained from animal bite incidents reported to Wellington-Dufferin-Guelph Public Health during 2010 and 2011. Descriptive statistics of 718 eligible reports revealed the average rate of animal biting was 1.55 bites per 1000 residents per year. Approximately 54% of these animals were vaccinated against rabies, 32% were not up to date with their rabies vaccination, and the remaining 14.5% were of unknown status. The unit of analysis was the municipality, and the four outcomes of interest were: (i) number of animal bite incidents per 1000 residents, (ii) number of dog bite incidents per 1000 residents, (iii) proportion of animals involved in bite incidents that were not up to date with their rabies vaccination, and (iv) proportion of dogs that were not up to date. Associations between the outcomes and selected demographic variables were investigated using regression analysis. The number of veterinary clinics per 10,000 residents, and whether the municipality was urban or rural were identified as significant predictors for the number of animal bites per 1000 residents, and the number of dog bites. There were no significant predictors for the proportion of unvaccinated animals or dogs. Spatial clustering and the location of spatial clusters were assessed using the empirical Bayes index and spatial scan test. This analysis identified five municipalities within the health department that have a high rate of biting incidents and a high proportion of animals that were not up to date on their rabies vaccination. Such municipalities are ideal for targeted educational campaigns regarding the importance of vaccination in pets. © 2014 Blackwell Verlag GmbH.

Epidemiology, clinical features and risk factors for human rabies and animal bites during an outbreak of rabies in Maputo and Matola cities, Mozambique, 2014: Implications for public health interventions for rabies control

PubMed Central

Salomão, Cristolde; Nacima, Amílcar; Cuamba, Lutero; Gujral, Lorna; Amiel, Olga; Baltazar, Cynthia; Cliff, Julie

2017-01-01

Background In Mozambique, the majority of rabies outbreaks are unreported and data on the epidemiological features of human rabies and animal bites are scarce. An outbreak of human rabies in adjacent Maputo and Matola cities in 2014 prompted us to investigate the epidemiology, clinical features and risk factors of human rabies and animal bites in the two cities. Methodology/Principal findings We reviewed cases of human rabies and animal bites from April to July 2014, and carried out a community investigation in July and August in the neighborhoods where cases of human rabies resided. This investigation included collection of clinical, demographic and epidemiological information and a case control study to investigate the risk factors associated with human rabies. Fourteen cases of human rabies were detected in Maputo (n = 10) and Matola (n = 3) cities and neighbouring Boane district (n = 1) between April and August 2014, all of whom had been admitted to hospital. All had a recent history of dog bite. Of the 14 rabid dogs, only one had been immunized. 819 cases of animal bites were registered, of which 64.6% (529/819) were from Maputo City. Dogs were responsible for 97.8% (801/819) of all animal bites, but only 27.0% (126/467) were immunized. Factors significantly associated with human rabies were: age <15 years (p = 0.05), bite by stray dog (p = 0.002), deep wound (p = 0.02), bite in the head (p = 0.001), bite by unimmunized dog (p = 0.01), no use of soap and water (p = 0.001), and no post-exposure prophylaxis (p = 0.01). Conclusions/Significance Implementation of control measures for rabies is poor in Maputo and Matola cities, where cases of human rabies were strongly associated with bites by stray and unvaccinated dogs and irregular implementation of post-exposure measures. PMID:28742094

Efficacy and effects of various anti-crib devices on behaviour and physiology of crib-biting horses.

PubMed

Albright, J D; Witte, T H; Rohrbach, B W; Reed, A; Houpt, K A

2016-11-01

Crib-biting is a common oral stereotypy. Although most treatments involve prevention, the efficacy of various anti-crib devices, including surgically implanted gingival rings, has thus far not been empirically tested. Demonstrate the effect that 2 anti-crib collars, muzzle and gingival rings have on crib-biting, other maintenance behaviours, and cortisol levels in established crib-biting horses. Randomised, crossover clinical trial. In Experiment I, 2 anti-crib collars and a muzzle were used on 8 established crib-biting horses; horses wore each of 3 devices for 7 days, with a 7-day device-free period between treatments. Horses were video recorded for 24 h at least 3 times each week prior to any device placement, and always the day after a device was removed. In Experiment II, gingival rings were used in 6 established crib-biting horses; horses were video recorded for 3 days prior to ring implantation and the day after surgery until the rings became ineffective. Plasma cortisol levels were assessed every day during Experiment II and on Days 1, 3 and 5 of each week during Experiment I. All devices significantly reduced crib-biting compared with control periods. There was no significant difference in crib-bite reduction amongst devices in Experiment I, or between pre-device periods and the first day the device was removed. The only increase in plasma cortisol occurred on the day of surgery in Experiment II. Common anti-crib devices are effective in reducing crib-biting and significant distress was not evident from our findings. We did not find a post inhibitory rebound effect. Surgical rings were successful only temporarily and implantation was probably painful to the horses. Because stereotypies involve suboptimal environmental conditions, efforts should be made to improve husbandry factors previously shown to contribute to crib-biting, and research into decreasing horses' motivation to crib-bite should continue. © 2015 EVJ Ltd.

Mandatory desexing of dogs: one step in the right direction to reduce the risk of dog bite? A systematic review.

PubMed

D'Onise, Katina; Hazel, Susan; Caraguel, Charles

2017-06-01

Preventing dog bites is an intractable problem given the complex dog bite injury environment. Desexing of dogs has the opportunity of creating a safer injury environment, given the potential links between desexing and behaviour change in dogs. A systematic review of the literature was conducted to examine the evidence for desexing of dogs to reduce dog bite risk within a population health paradigm. Medline and CAB Abstracts were searched for studies that reported data on the association of dog neuter status with the risk of dog bite. All definitions of dog bite were included and all empirical studies were included in the review, limited to those published in English. Quality appraisal and data extraction were based on the 2013 evidence-based practice and critical appraisal tool from the University of Auckland. Five out of six observational studies, from four study populations found evidence that intact dogs were associated with an increased risk of dog bite compared with desexed dogs. The effect sizes ranged across the studies and given the heterogeneity of the studies no single effect size on the association between desexing and dog bite risk could be estimated. There is consistent evidence that desexing dogs is associated with a reduced risk of dog bite, although the studies reflect association and may not be causal. Although recent publications have suggested desexing is associated with health and behavioural costs in some breeds, population level evidence supports desexed dogs having a longer lifespan, and being less likely to wander with the added benefit of reducing unwanted litters. Thus, mandatory desexing presents a possible opportunity for prevention of dog bites expanding dog bite prevention beyond an education-only approach. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Animal Bites of the Hand

MedlinePlus

... animal bite Find a hand surgeon near you. Videos Figures Figure 1: Finger infection from cat bite ... or "in." Also, avoid using media types like "video," "article," and "picture." Tip 4: Your results can ...

Microbial Analysis of Bite Marks by Sequence Comparison of Streptococcal DNA

PubMed Central

Kennedy, Darnell M.; Stanton, Jo-Ann L.; García, José A.; Mason, Chris; Rand, Christy J.; Kieser, Jules A.; Tompkins, Geoffrey R.

2012-01-01

Bite mark injuries often feature in violent crimes. Conventional morphometric methods for the forensic analysis of bite marks involve elements of subjective interpretation that threaten the credibility of this field. Human DNA recovered from bite marks has the highest evidentiary value, however recovery can be compromised by salivary components. This study assessed the feasibility of matching bacterial DNA sequences amplified from experimental bite marks to those obtained from the teeth responsible, with the aim of evaluating the capability of three genomic regions of streptococcal DNA to discriminate between participant samples. Bite mark and teeth swabs were collected from 16 participants. Bacterial DNA was extracted to provide the template for PCR primers specific for streptococcal 16S ribosomal RNA (16S rRNA) gene, 16S–23S intergenic spacer (ITS) and RNA polymerase beta subunit (rpoB). High throughput sequencing (GS FLX 454), followed by stringent quality filtering, generated reads from bite marks for comparison to those generated from teeth samples. For all three regions, the greatest overlaps of identical reads were between bite mark samples and the corresponding teeth samples. The average proportions of reads identical between bite mark and corresponding teeth samples were 0.31, 0.41 and 0.31, and for non-corresponding samples were 0.11, 0.20 and 0.016, for 16S rRNA, ITS and rpoB, respectively. The probabilities of correctly distinguishing matching and non-matching teeth samples were 0.92 for ITS, 0.99 for 16S rRNA and 1.0 for rpoB. These findings strongly support the tenet that bacterial DNA amplified from bite marks and teeth can provide corroborating information in the identification of assailants. PMID:23284761

Fight Bite Injuries: Aggressive Tendencies Associated with Smaller Second to Fourth Digit Ratio.

PubMed

Joyce, Cormac W; O' Regan, Andrew; Kelly, Jack L; O' Shaughnessy, Michael

2017-12-01

Fight bite injuries are typically sustained by young, combative males and are the direct consequence of an aggressive act. Second to fourth digit ratios (2D:4D) are dependent on prenatal androgen exposure and lower ratios have been shown to be linked to various psychological and physical traits, including aggression. The aim of this study was to examine the 2D:4D ratios in a cohort of patients with fight bite injuries and compare these to an age and gender-matched control group. The 2D:4D ratios were calculated using plain films of the hand from 133 patients (122 males, 11 females) with fight bite injuries. A further 133 radiographs were obtained from patients that did not have fight bite injuries and digit ratios were calculated in the same fashion. Statistical analysis was then carried out to compare the 2D:4D ratios between the different groups. The 2D:4D ratios for male fight bite patients was significantly smaller than the male control group (p < 0.05). No significant difference was observed between the female fight bite patients and the female control group (p > 0.05). Fight bite injuries are usually sustained as a result of aggression. 2D:4D ratios are reflect intrauterine androgen exposure and low ratios have been linked to aggressive tendencies. We have demonstrated that male patients who sustained fight bite injuries have a lower 2D:4D ratio then the general population, thereby suggesting that exposure to prenatal androgens can lead to aggressive tendencies in adulthood. This suggests that lower ratios may predict a predisposition to acts of aggression, and as such result in an increased likelihood of sustaining an injury such as a fight bite.

Fatal dog attacks, 1989-1994.

PubMed

Sacks, J J; Lockwood, R; Hornreich, J; Sattin, R W

1996-06-01

To update data on fatal dog bites and see if past trends have continued. To merge data from vital records, the Humane Society of the United States, and searches of electronic news files. United States. U.S. residents dying in the U.S. from 1989 through 1994 from dog bites. We identified 109 dog bite-related fatalities, of which 57% were less than 10 years of age. The death rate for neonates was two orders of magnitude higher than for adults and the rate for children one order of magnitude higher. Of classifiable deaths, 22% involved an unrestrained dog off the owner's property, 18% involved a restrained dog on the owner's property, and 59% involved an unrestrained dog on the owner's property. Eleven attacks involved a sleeping infant; 19 dogs involved in fatal attacks had a prior history of aggression; and 19 of 20 classifiable deaths involved an unneutered dog. Pit bulls, the most commonly reported breed, were involved in 24 deaths; the next most commonly reported breeds were rottweilers (16) and German shepherds (10). The dog bite problem should be reconceptualized as a largely preventable epidemic. Breed-specific approaches to the control of dog bites do not address the issue that many breeds are involved in the problem and that most of the factors contributing to dog bites are related to the level of responsibility exercised by dog owners. To prevent dog bite-related deaths and injuries, we recommend public education about responsible dog ownership and dog bite prevention, stronger animal control laws, better resources for enforcement of these laws, and better reporting of bites. Anticipatory guidance by pediatric health care providers should address dog bite prevention.

Why your housecat's trite little bite could cause you quite a fright: a study of domestic felines on the occurrence and antibiotic susceptibility of Pasteurella multocida.

PubMed

Freshwater, A

2008-10-01

Approximately four to five million animal bite wounds are reported in the USA each year. Domestic companion animals inflict the majority of these wounds. Although canine bites far outnumber feline bites, unlike the dog, the cat's bite is worse than its bark; 20-80% of all cat bites will become infected, compared with only 3-18% of dog bite wounds. Pasteurella multocida is the most commonly cultured bacterium from infected cat bite wounds. Anyone seeking medical attention for a cat-inflicted bite wound is given prophylactic/empiric penicillin or a derivative to prevent Pasteurella infection (provided they are not allergic to penicillins). In an effort to establish a carriage rate of P. multocida in the domestic feline, bacterial samples from the gingival margins of domestic northern Ohio cats (n=409) were cultured. Isolates were tested for antibiotic sensitivity as prophylactic/empiric use of penicillin and its derivatives could potentially give rise to antibiotic resistance in P. multocida. The high carriage rate (approximately 90%) of P. multocida observed was found to be independent of physiological and behavioural variables including age, breed, food type, gingival scale, lifestyle and sex. High antibiotic susceptibility percentages were observed for benzylpenicillin, amoxicillin-clavulanate, cefazolin, and azithromycin (100%, 100%, 98.37% and 94.02%, respectively) in P. multocida isolates. The high prevalence of P. multocida in the feline oral cavity indicates that prophylactic/empiric antibiotic therapy is still an appropriate response to cat bite wounds. Additionally, the susceptibility of P. multocida to penicillin and its derivatives indicates that they remain reliable choices for preventing and treating P. multocida infections.

An Algorithmic Approach to Operative Management of Complex Pediatric Dog Bites: 3-Year Review of a Level I Regional Referral Pediatric Trauma Hospital

PubMed Central

Shayesteh, Ali; Xu, Min Li

2017-01-01

Background: Incidence of dog bites continues to rise among the pediatric population and serves as a public health threat for the well-being of children. Plastic surgeons are at the forefront of initial management and eventual outcome of these devastating injuries. This study set out to determine the nature of dog bite injuries treated over a 3-year period at a large level 1 pediatric trauma center. Methods: A retrospective review of emergency room records of all pediatric patients (age, 0–18 years old) who sustained dog bites between January 2012 and December 2014 were gathered. All details about age of patient, location and severity of dog bites, type of dog breed, antibiotics given, and emergency versus operative treatment were recorded and analyzed. Results: One hundred eight patients aged 5 months to 18 years old were treated in the emergency department after suffering dog bite injuries during the study period. The highest incidence of dog bites occurred in preschool children. The mean age for patients who required operative repair was lower than the mean age for patients who underwent primary closure in the emergency department. The location of injury was most commonly isolated to the head/neck region. Of the 56 cases that had an identified dog breed, pit bulls accounted for 48.2% of the dog bites, and 47.8% of pit bull bites required intervention in the operating room. Conclusion: Children with large dog bite injuries require more immediate care in a level 1 pediatric trauma hospitals in order to optimize their hospitalization course and eventual outcome. PMID:29184724

Resting behaviour of Anopheles stephensi type form to assess its amenability to control malaria through indoor residual spray.

PubMed

Nagpal, B N; Srivastava, Aruna; Dash, A P

2012-09-01

In the present study, an attempt was made to find reasons of ineffectiveness of indoor residual spray to interrupt malaria transmission by investigating the behaviour of two variants of Anopheles stepnesi, viz. type form and mysorensis in rural areas of Rajasthan, India. Both low malarious (DDT spray from 1958 to 1976) and high malarious (DDT spray from 1958 to April 2006) villages were selected for the study in Arid zone district Jodhpur, Rajasthan during March-April 2006. Resting behaviour of the species during all its movement rhythms covering 24 h period related to: (i) swarming/ mating; (ii) pre- and post-biting rest; (iii) after feed resting between hoping movements; (iv) night and day time resting and; (v) diel activity movements in response to temperature changes, were carried out. The results showed that household objects like cupboards, furnitures, hanging clothes, goods stacked on loft, stored clothes, cobwebs and floor were the dominant resting sites both in sprayed and unsprayed villages. About 95 and 97% of An. stephensi preferred to rest on household objects of unsprayed and sprayed villages respectively. There was no significant difference in resting behaviour of the species in both groups of villages (p >0.05). The pre-biting resting time was recorded as 5 to 15 min whereas post-biting resting time lasted for 15 to 25 min. After biting outdoor (in courtyard--open to sky) species starts entering the rooms at around 2330 hrs. It was observed that during III quarter (0100 to 0400 hrs) maximum species entered into the room were 56% in unsprayed and 62% in sprayed villages. Statistically there was no significant difference in the entry of mosquitoes (p >0.05) in both the groups of villages. Before DDT era, An. stephensi was found resting at all heights of the walls inside the human dwellings. Present study revealed that An. stephensi is trying to avoid sprayable surfaces and tend to rest on unsprayable surfaces during all its movement rhythms starting from swarming, pre-/post-biting and during hopping movements in the courtyard and thereafter household objects inside the room as final day time resting. It was concluded that changed behaviour of resting of An. stephensi on unsprayable objects in sprayed rooms largely accounted for failure of malaria control. Control of An. stephensi, thus requires an integrated vector control strategy based upon interesectoral, environmental, larviciding with chemical/biolarvicide and use of larvivorous fish wherever feasible. Such a control strategy offers cost-effective and sustainable option than indoor residual spray.

Necrotizing fasciitis due to Streptococcus mitis caused by accidental human bite.

PubMed

Bastug, Aliye; Kislak, Sumeyye; Mutlu, Nevzat Mehmet; Akcaboy, Zeynep Nur; Koksal, Asude; Sertcelik, Ahmet; Ünlü, Ramazan Erkin; Akinci, Esragul; Bodur, Hurrem

2016-01-31

Human bite wounds are more prone to infection than animal bites, which may cause necrotizing soft tissue infections such as myositis, fasciitis. Both aerobic and anaerobic microorganisms may be responsible, including Streptococcus spp., Staphylococcus aureus, Peptostreptococcus spp. Necrotizing fasciitis is characterized by serious tissue destruction and systemic toxicity with high morbidity and mortality. We report a patient with Streptococcus mitis associated necrotizing fasciitis on the upper extremity resulting from an accidental human bite, which caused nearly fatal infection. Prophylactic antibiotic treatment should be given after a human bite to prevent infection. If the infection signs and symptoms develop, rapid diagnosis, appropriate antibiotic and surgical therapy should be administered immediately. Streptococcus mitis is a viridans streptococcus, usually known as a relatively benign oral streptococcus. To our knowledge, this is the first necrotizing fasciitis case due to Streptococcus mitis after human bite.

[Adverse reactions to mosquito bites in scholars from Monterrey, Nuevo Leon, Mexico].

PubMed

Manrique López, María Amelia; González Díaz, Sandra N; Arias Cruz, Alfredo; Sedó Mejía, Giovanni A; Canseco Villarreal, José Ignacio; Gómez Retamoza, Ernesto Antonio; Padrón López, Olga Magdalena; Cruz Moreno, Miguel Angel; Cisneros Salazar, Guillermo Daniel

2010-01-01

Allergic reactions to insect bites are a global problem, the true incidence and prevalence of morbidity from adverse reactions to mosquito bites are unknown. To describe the adverse reactions to mosquito bites in school-age children of Monterrey, Nuevo Leon. A cross-sectional descriptive study was made via a randomized application of questionnaires to children from public elementary schools in the metropolitan area of Monterrey, Nuevo Leon. A total of 11 public schools randomly selected were included in the study. One thousand questionnaires were submitted, of which 506 fulfilled the inclusion criteria; 55% were females. Seventy-six percent referred adverse reactions to mosquito bites, itching (75%) and rash (72%) being the most frequent ones, in the last 12 months. Adverse reactions to mosquito bites occur frequently. Early detection is important to establish a prompt treatment.

Early correction of unilateral scissor bite using transforce appliance and modified twin block appliance

PubMed Central

Chandorikar, Harshal; Nagrik, Arun; Bhad, Wasundhara A; Chavan, Santosh J; Doshi, Umal H

2017-01-01

Early treatment of scissor bite has been advocated mainly to prevent function jaw shift that can eventually lead to permanent skeletal asymmetry and temporomandibular joint pathosis. Although unilateral scissor bite is more common, most of the times, bilateral mandibular expansion is indicated. Lingual transforce appliance can be useful in such cases. This article presents a patient with unilateral scissor bite in mixed dentition with alveolar narrowing. Transforce appliance was used for scissor bite correction followed by modified twin block appliance for stabilization and settling of occlusion till the eruption of premolars. The case was finished with fixed mechanotherapy. Two years after completion of treatment, results were well maintained. Our results suggest that lingual transforce appliance along with careful management of occlusion is effective in the early management of severe unilateral scissor bite. PMID:28546961

Anterior open bite treatment with magnets.

PubMed

Kiliaridis, S; Egermark, I; Thilander, B

1990-11-01

The aim of this study was to examine the effects of repelling magnets on the treatment of anterior open bite and compare them with the effects of acrylic posterior bite-blocks. Twenty patients, aged 9-16 years with skeletal anterior open bite, were randomly divided into two groups. In one group the patients wore posterior repelling magnet splints and in the other they wore acrylic posterior bite-blocks of the same thickness as the magnet splints. The patients were instructed to use their appliance as much as possible (the minimum accepted being 18 hours daily) during a 6-month period. Dental casts, intra-oral photos, and lateral cephalograms were taken before and after treatment, and the patients were also examined regularly to identify the development of any craniomandibular disorders. In the first group, the dental and skeletal vertical relation responded quickly to the magnet treatment. The open bite was generally closed in just under 4 months, especially in patients in early mixed dentition. Spacing in the labial segments decreased in some cases, while slight crowding was induced in others. Transverse problems, i.e. unilateral cross-bite, sometimes followed by scissor-bite on the opposite side, was observed in those patients who were in the early mixed dentition and had used the magnets intensively. The patients who wore acrylic posterior bite-blocks also showed improvement in the dental and skeletal vertical relationships, especially during the first months. This was followed by a 'plateau' period. No transverse problems were found in these patients.

Distribution and medical aspects of Loxosceles rufescens, one of the most invasive spiders of the world (Araneae: Sicariidae).

PubMed

Nentwig, Wolfgang; Pantini, Paolo; Vetter, Richard S

2017-06-15

Loxosceles rufescens is a circum-Mediterranean spider species, potentially harmful to humans. Its native area covers the Mediterranean Basin and Near East. Easily spread with transported goods, it is meanwhile an alien and invasive species to nearly all other continents and many islands. This species occurs in semi-arid steppe-like habitats, typically under stones and in cavities, which enables it to settle inside buildings when invading the synanthropic environment. This review analyses the literature of L. rufescens bites to humans (38 publications) of which only 11 publications refer to 12 verified spider bites (11% of the reported bites). Two published allegedly deadly spider bites (Thailand 2014 and Italy 2016) involve non-verified spider bites and are thus not reliable. The symptoms and therapy of these 11 verified bites are described: only five cases showed moderate systemic effects, nine cases developed necrosis, four cases needed surgical debridement, all cases healed without complications within a few weeks. In conclusion, L. rufescens is a spider species globally spread by human activity, it rarely bites humans and the bites are less harmful than often described. There is no known fatal issue. Copyright © 2017 Elsevier Ltd. All rights reserved.

A digital process for additive manufacturing of occlusal splints: a clinical pilot study

PubMed Central

Salmi, Mika; Paloheimo, Kaija-Stiina; Tuomi, Jukka; Ingman, Tuula; Mäkitie, Antti

2013-01-01

The aim of this study was to develop and evaluate a digital process for manufacturing of occlusal splints. An alginate impression was taken from the upper and lower jaws of a patient with temporomandibular disorder owing to cross bite and wear of the teeth, and then digitized using a table laser scanner. The scanned model was repaired using the 3Data Expert software, and a splint was designed with the Viscam RP software. A splint was manufactured from a biocompatible liquid photopolymer by stereolithography. The system employed in the process was SLA 350. The splint was worn nightly for six months. The patient adapted to the splint well and found it comfortable to use. The splint relieved tension in the patient's bite muscles. No sign of tooth wear or significant splint wear was detected after six months of testing. Modern digital technology enables us to manufacture clinically functional occlusal splints, which might reduce costs, dental technician working time and chair-side time. Maximum-dimensional errors of approximately 1 mm were found at thin walls and sharp corners of the splint when compared with the digital model. PMID:23614943

Implant-supported Mandibular Overdentures in Very Old Adults

PubMed Central

Müller, F.; Duvernay, E.; Loup, A.; Vazquez, L.; Herrmann, F.R.; Schimmel, M.

2013-01-01

The purpose of this study was (1) to investigate denture satisfaction following the conversion of existing mandibular complete dentures to implant overdentures (IOD) in very old edentulous patients who depend on help for activities of daily living and (2) to evaluate secondary end points, such as functional, structural, nutritional, and patient-centered aspects. For this randomized clinical trial, 2 interforaminal short implants were placed in the intervention group (n = 16, 85.0 ± 6.19 yrs) to retain mandibular IODs; the control group (n = 18, 84.1 ± 5.55 yrs) received conventional relines. During the first year, no implant was lost; however, 2 patients died. IODs proved more stable, and participants in the intervention group demonstrated significantly higher denture satisfaction as well as an increased oral health–related quality of life compared to the control group. Maximum voluntary bite force improved significantly with IODs, yet the chewing efficiency was not different between groups. Masseter muscle thickness increased with IODs, mainly on the preferred chewing side. Body mass index decreased in both groups, but the decline tended to be smaller in the intervention group; blood markers and the Mini Nutritional Assessment did not confirm this tendency. These results indicate that edentulous patients who depend on help for activities of daily living may benefit from IODs even late in life (ClinicalTrial.gov NCT01928004). PMID:24158342

A Multi-Site Study on Knowledge, Attitudes, Beliefs and Practice of Child-Dog Interactions in Rural China

PubMed Central

Shen, Jiabin; Li, Shaohua; Xiang, Huiyun; Pang, Shulan; Xu, Guozhang; Schwebel, David C.

2013-01-01

This study examines demographic, cognitive and behavioral factors that predict pediatric dog-bite injury risk in rural China. A total of 1,537 children (grades 4–6) in rural regions of Anhui, Hebei and Zhejiang Provinces, China completed self-report questionnaires assessing beliefs about and behaviors with dogs. The results showed that almost 30% of children reported a history of dog bites. Children answered 56% of dog-safety knowledge items correctly. Regressions revealed both demographic and cognitive/behavioral factors predicted children’s risky interactions with dogs and dog-bite history. Boys behaved more riskily with dogs and were more frequently bitten. Older children reported greater risks with dogs and more bites. With demographics controlled, attitudes/beliefs of invulnerability, exposure frequency, and dog ownership predicted children’s self-reported risky practice with dogs. Attitudes/beliefs of invulnerability, dog exposure, and dog ownership predicted dog bites. In conclusion, both demographic and cognitive/behavioral factors influenced rural Chinese children’s dog-bite injury risk. Theory-based, empirically-supported intervention programs might reduce dog-bite injuries in rural China. PMID:23470881

Effectiveness of permethrin-treated clothing to prevent tick exposure in foresters in the central Appalachian region of the USA.

PubMed

L Richards, Stephanie; G Balanay, Jo Anne; W Harris, Jonathan

2015-01-01

Outdoor workers are at risk from mosquito and tick bites and the extent to which exposures are linked to vector-borne disease is not understood. This pilot study characterizes for ester exposure to mosquitoes and ticks, and assesses effectiveness of permethrin-treated clothing for prevention of tick bites. Foresters (N = 34) from Kentucky, North Carolina, Ohio, Tennessee, Virginia, and West Virginia were placed into treatment (permethrin-treated clothing) or control (untreated clothing) groups. Foresters completed questionnaires about work-related tick/mosquito exposure and 454 ticks were collected/identified from May to June 2013. A time-weighted analysis based on information submitted by foresters about time working outdoors showed that control participants received a lower rate of tick exposure (0.15 tick bites/hour; 13 bites/person) compared to treatment participants (0.27 bites/hour; 21 bites/person). However, more control participants (85 %) received at least one tick bite compared to treatment participants (52 %). Outdoor workers should be aware of available protective measures, such as permethrin-treated clothing, that may mitigate occupational risks.

Myoelectric activation and kinetics of different plyometric push-up exercises.

PubMed

García-Massó, Xavier; Colado, Juan C; González, Luis M; Salvá, Pau; Alves, Joao; Tella, Víctor; Triplett, N Travis

2011-07-01

The kinetic and myoelectric differences between 3 types of plyometric push-ups were investigated. Twenty-seven healthy, physically active men served as subjects and completed both familiarization and testing sessions. During these sessions, subjects performed 2 series of 3 plyometric push-up variations in a counterbalanced order according to the following techniques: Countermovement push-ups (CPUs) were push-ups performed with the maximum speed of movement; jump push-ups (JPUs) were similar to clapping push-ups; and fall push-ups (FPUs) required kneeling subjects to drop and then attempt to return to their initial position. Vertical ground reaction forces were determined by using a force plate. Myoelectric activity was recorded by means of electromyography. Impact force and impact rate of force development were significantly (p < 0.05) higher for FPUs than for JPUs. The maximum rate of force development was higher for CPUs (p < 0.05) than for JPUs, and the maximum force was higher for the CPUs than for the FPUs (p < 0.05). There were differences among exercises for the mean muscle activation of the pectoralis major (PM; p < 0.001), triceps brachii (p < 0.001), external oblique (p < 0.005) and anterior deltoid (p < 0.001), and in the maximum muscle activation of the PM (p < 0.001). Plyometric push-ups with countermovement achieved a higher maximum force and rate of force and did not cause impact forces. Thus, this type of push-up exercise may be regarded as the best for improving explosive force. The FPU exercise achieved higher levels of muscular activation in the agonist and synergist muscle groups, and greater impact forces and impact force development rates.

Adhesive behavior of micro/nano-textured surfaces

NASA Astrophysics Data System (ADS)

Zhang, Yuyan; Wang, Xiaoli; Li, Hanqing; Wang, Ben

2015-02-01

A numerical model of the adhesive contact between a rigid smooth sphere and an elastic textured surface based on the Lennard-Jones interatomic potential law and the Hamaker summation method is established. Textures are considered by introducing the texture height distribution into the gap equation. Simulation results show that the pull-off force on textured surfaces decreases compared to that on smooth surfaces. Furthermore, effects of sphere-shaped textures on reducing adhesion are more obvious than cylinder-shaped or cube-shaped textures when the coverage area ratio, maximum height and interval of textures are fixed. For surfaces with sphere-shaped textures, variation trends of the mean pull-off force with texture density are not monotonous, and there exists a certain range of texture densities in which the mean pull-off force is small and its variation is insignificant. In addition, the pull-off force depends also on the maximum height and radius of textures. On one hand, if the texture radius is fixed, larger maximum height results in smaller pull-off force, and if the maximum height is fixed, the pull-off force tends to increase almost linearly with increases in texture radius. On the other hand, if the height-diameter ratio of textures is fixed, the pull-off force reaches a minimum at an optimum texture radius or maximum height.

Tick Talk: Block Tick Bites and Lyme Disease

MedlinePlus

... Subscribe May 2014 Print this issue Tick Talk Block Tick Bites and Lyme Disease En español Send ... Health Researchers Examine the Structure of Zika Virus Block the Buzzing, Bites, and Bumps Wise Choices To ...

Spider Bites: First Aid

MedlinePlus

... United States, its range is central and southern states. Signs and symptoms of a brown recluse spider bite vary but may include: At first, a mild pain Redness and intense pain A deep blue or purple area around the bite, which ...

Rat bite fever in a pet lover.

PubMed

Cunningham, B B; Paller, A S; Katz, B Z

1998-02-01

Rat-bite fever is an uncommon bacterial illness resulting from infection with Streptobacillus moniliformis that is often transmitted by the bite of a rat. The cutaneous findings in rat-bite fever are nonspecific but have been described as maculopapular or petechial. We describe a 9-year-old girl with acrally distributed hemorrhagic pustules, fever, and arthralgias. Diagnosis was delayed because of difficulty in identifying the pathologic organism. She was successfully treated with 10 days of ceftriaxone.

Prospective audit of 106 consecutive human bite injuries: the importance of history taking

PubMed Central

Wallace, C; Robertson, C

2005-01-01

Methods: Patients with cutaneous wounds who did not present with a history of human bite were asked a follow up question. Those who then gave a history of human bite were noted. Results: Certain groups of patients with human bites were significantly more likely to provide a factitious history and/or delay presentation. Conclusion: Follow up questioning dramatically increased the case-detection rate, prompting specific management. PMID:16299201

Orthodontic treatment of a complex open-bite malocclusion with temporary anchorage devices: a case report.

PubMed

Waldman, Alexander B

2010-08-01

Orthodontic temporary anchorage devices provide a novel alternative to orthognathic surgery for the treatment of severe anterior open-bite malocclusions. These implantable devices provide skeletal anchorage for maxillary molar intrusion, allowing for mandibular autorotation and subsequent open-bite closure. This case demonstrates step-by-step treatment of a 41-year-old woman with a severe open-bite malocclusion. Detailed orthodontic mechanics are described at every stage of treatment.

Deadly case of Pasteurella multocida aortitis and mycotic aneurysm following a cat bite.

PubMed

Cho, Dennis Dane; Berliner, Yaniv; Carr, David

2016-06-16

Animal bites are frequently encountered in the emergency department (ED). Aortitis leading to mycotic abdominal aortic aneurysm is a rare and potentially deadly complication of Pasteurella multocida (P. multocida) following an animal bite. We present the case of a 68-year-old male who presented to the ED after falling at home. He complained of weakness and abdominal pain. He was in septic shock and was treated empirically with broad-spectrum antibiotics and intravenous fluids. He reported previous antibiotic treatment of a cellulitis secondary to a cat bite injury to his right thumb four weeks prior. Abdominal ultrasound and subsequent computed tomography scan revealed a leaking mycotic abdominal aneurysm that was surgically repaired. Blood cultures and aortic wall tissue cultures grew P. multocida. Given how common animal bite presentations are in the ED, this case highlights the need to consider aortitis and mycotic abdominal aortic aneurysm in an unwell patient with an animal bite.

First bite syndrome: our experience of laser tympanic plexus ablation.

PubMed

Amin, N; Pelser, A; Weighill, J

2014-02-01

First bite syndrome is a condition characterised by severe facial pain brought on by the first bite of each meal. This can severely affect the patient's ability to eat. We present a 70-year-old woman for whom we performed a laser ablation of the left ear tympanic plexus, as treatment of first bite syndrome. A permeatal approach was used to raise a tympanomeatal flap. The tympanic plexus was identified on the promontory and a 4 mm2 area of the plexus was ablated using CO2 laser. The flap was repositioned and a dressing was placed with topical antibiotics. At two-month follow up, there was full resolution of the patient's symptoms. First bite syndrome carries a high morbidity; treatment options are variable, and often unsuccessful. We describe the first documented case of laser tympanic plexus ablation, with a very effective initial response. This procedure represents a useful therapeutic option for first bite syndrome.

U.S. Army soldiers' perceptions of arthropod pests and their effects on military missions.

PubMed

Mehr, Z A; Rutledge, L C; Echano, N M; Gupta, R K

1997-12-01

A survey was conducted to determine the effects of biting and stinging arthropods on military personnel, operations, and training. Nearly 70% of respondents reported experiencing problems attributable to arthropods. Arthropods obstructed movement and field position, prevented concealment and cover, disrupted maneuvers, and caused panic. Twenty percent of respondents reported attendance at sick call for treatment of bites or stings, and 4% were hospitalized or assigned to quarters. Median lost time was 2 days. Bee, wasp, and ant stings and spider and chigger bites were the most frequent causes of lost time. Additional training on biting and stinging arthropods, use of repellents and other personal protective measures, first aid for bites and stings, and conditions requiring medical attention is needed in field units to enhance mission performance and reduce time lost because of arthropods. Materials for treatment of bites and stings should be included in first-aid kits issued for field use.

Too hard to swallow: a secret secondary defence of an aposematic insect.

PubMed

Wang, Lu-Yi; Huang, Wen-San; Tang, Hsin-Chieh; Huang, Lung-Chun; Lin, Chung-Ping

2018-01-25

Anti-predator strategies are significant components of adaptation in prey species. Aposematic prey are expected to possess effective defences that have evolved simultaneously with their warning colours. This study tested the hypothesis of the defensive function and ecological significance of the hard body in aposematic Pachyrhynchus weevils pioneered by Alfred Russel Wallace nearly 150 years ago. We used predation trials with Japalura tree lizards to assess the survivorship of 'hard' (mature) versus 'soft' (teneral) and 'clawed' (intact) versus 'clawless' (surgically removed) weevils. The ecological significance of the weevil's hard body was evaluated by assessing the hardness of the weevils, the local prey insects, and the bite forces of the lizard populations. The existence of toxins or deterrents in the weevil was examined by gas chromatography-mass spectrometry (GC-MS). All 'hard' weevils were instantly spat out after being bitten once and survived attacks by the lizards. In contrast, the 'soft' weevils were chewed and subsequently swallowed. The results were the same regardless of the presence or absence of the weevil's tarsal claws. The hardness of 'hard' Pachyrhynchus weevils was significantly higher than the average hardness of other prey insects in the same habitat and the mean bite forces of the local lizards. The four candidate compounds of the weevil identified by GC-MS had no known toxic or repellent functions against vertebrates. These results reveal that the hardness of aposematic prey functions as an effective secondary defence, and they provide a framework for understanding the spatio-temporal interactions between vertebrate predators and aposematic insect prey. © 2018. Published by The Company of Biologists Ltd.

Functional aspects of treatment with implant-supported single crowns: a quality control study in subjects with tooth agenesis.

PubMed

Goshima, Kenichi; Lexner, Michala O; Thomsen, Carsten Eckhart; Miura, Hiroyuki; Gotfredsen, Klaus; Bakke, Merete

2010-01-01

No comprehensive patient-centered and clinical evaluations of the functional effect of treatment with implant-supported single crowns (ISSC) have been reported previously. To investigate whether and how treatment with ISSC affects masticatory function and Oral Health-Related Quality of Life (OHRQoL) in subjects with tooth agenesis. In nine females and nine males (32 + or - 10 years) with agenesis treated with one to four ISSC (68% in the premolar region), the treatment effect and masticatory function were assessed. The evaluation was performed first after implant placement shortly before crown cementation, and again 1 month after cementation. It consisted of questionnaires [including Oral Health Impact Profile (OHIP-49)] and functional examination with plastic strips, the Dental Prescale Film and the Occluzer system, Xylitol color-changeable gum and slices of Granny Smith apple. The patients' satisfaction with treatment was high and they experienced a significant overall improvement in their OHRQoL (on average 13% reduction in the total OHIP scores). The cementation of the crowns was associated with a significant increase in the number of near occlusal tooth contacts, contact area, bite force, and masticatory ability and performance. Correspondingly, there was a significant, positive correlation between the number of tooth contacts and (1) occlusal contact area, (2) bite force, and (3) masticatory performance. Treatment with ISSCs in subjects with tooth agenesis significantly increased masticatory function subjectively and clinically as well as OHRQoL. However, as the functional parameters before replacement of the teeth corresponded to values in subjects with complete dentitions, the functional importance of the increase may be questioned.

Three-dimensional finite element modelling of muscle forces during mastication.

PubMed

Röhrle, Oliver; Pullan, Andrew J

2007-01-01

This paper presents a three-dimensional finite element model of human mastication. Specifically, an anatomically realistic model of the masseter muscles and associated bones is used to investigate the dynamics of chewing. A motion capture system is used to track the jaw motion of a subject chewing standard foods. The three-dimensional nonlinear deformation of the masseter muscles are calculated via the finite element method, using the jaw motion data as boundary conditions. Motion-driven muscle activation patterns and a transversely isotropic material law, defined in a muscle-fibre coordinate system, are used in the calculations. Time-force relationships are presented and analysed with respect to different tasks during mastication, e.g. opening, closing, and biting, and are also compared to a more traditional one-dimensional model. The results strongly suggest that, due to the complex arrangement of muscle force directions, modelling skeletal muscles as conventional one-dimensional lines of action might introduce a significant source of error.

Taking the Bite out of Bruxism (For Kids)

MedlinePlus

... First Aid & Safety Doctors & Hospitals Videos Recipes for Kids Kids site Sitio para niños How the Body Works ... Taking the Bite Out of Bruxism KidsHealth / For Kids / Taking the Bite Out of Bruxism Print Do ...

Quantifying seasonal and diel variation in Anopheline and Culex human biting rates in Southern Ecuador.

PubMed

Ryan, Sadie J; Lippi, Catherine A; Boersch-Supan, Philipp H; Heydari, Naveed; Silva, Mercy; Adrian, Jefferson; Noblecilla, Leonardo F; Ayala, Efraín B; Encalada, Mayling D; Larsen, David A; Krisher, Jesse T; Krisher, Lyndsay; Fregosi, Lauren; Stewart-Ibarra, Anna M

2017-11-22

Quantifying mosquito biting rates for specific locations enables estimation of mosquito-borne disease risk, and can inform intervention efforts. Measuring biting itself is fraught with ethical concerns, so the landing rate of mosquitoes on humans is often used as a proxy measure. Southern coastal Ecuador was historically endemic for malaria (Plasmodium falciparum and Plasmodium vivax), although successful control efforts in the 2000s eliminated autochthonous transmission (since 2011). This study presents an analysis of data collected during the elimination period. Human landing catch (HLC) data for three mosquito taxa: two malaria vectors, Anopheles albimanus and Anopheles punctimacula, and grouped Culex spp. were examined for this study. These data were collected by the National Vector Control Service of the Ministry of Health over a 5-year time span (2007-2012) in five cities in southern coastal Ecuador, at multiple households, in all months of the year, during dusk-dawn (18:00-6:00) hours, often at both indoor and outdoor locations. Hurdle models were used to determine if biting activity was fundamentally different for the three taxa, and to identify spatial and temporal factors influencing bite rate. Due to the many different approaches to studying and quantifying bite rates in the literature, a glossary of terms was created, to facilitate comparative studies in the future. Biting trends varied significantly with species and time. All taxa exhibited exophagic feeding behavior, and outdoor locations increased both the odds and incidence of bites across taxa. Anopheles albimanus was most frequently observed biting, with an average of 4.7 bites/h. The highest and lowest respective months for significant biting activity were March and July for An. albimanus, July and August for An. punctimacula, and February and July for Culex spp. Fine-scale differences in endophagy and exophagy, and temporal differences among months and hours exist in biting patterns among mosquito taxa in southern coastal Ecuador. This analysis provides detailed information for targeting vector control activities, and household level vector prevention strategies. These data were collected as part of routine vector surveillance conducted by the Ministry of Health, and such data have not been collected since. Reinstating such surveillance measures would provide important information to aid in preventing malaria re-emergence.

Pilot study assessing the effectiveness of factory-treated, long-lasting permethrin-impregnated clothing for the prevention of tick bites during occupational tick exposure in highly infested military training areas, Germany.

PubMed

Faulde, Michael K; Rutenfranz, Martin; Keth, Alexander; Hepke, Jürgen; Rogge, Mareike; Görner, Andreas

2015-02-01

The protective effectiveness of factory-based permethrin-impregnated polymer-coated battle dress uniforms (PTBDUs) against tick bites was evaluated at four military training areas in southwestern and central Germany where tick bite incidence is known to be high. Data were analyzed by comparing tick bite incidence using non-permethrin-treated BDUs (NTBDUs) during 2009 versus PTBDUs during 2010 and 2011, the first two years after their formal introduction for in-country use in the German Bundeswehr. During 2009, 262 individual tick bites were reported at the four training sites, resulting in a tick bite incidence of 8.8 % per exposed person when wearing NTBDUs only. In 2010 and 2011, one tick bite case occurred under field conditions each year that PTBDUs were worn, corresponding to a protective effectiveness of 99.6 and 98.6 %. These data imply an annual tick bite incidence of 0.035 and 0.078 % per exposed person, respectively. Between 2010 and 2011, a 0.8 % decline in the protective effectiveness of PTBDUs was observed. Five tick bite incidents occurred while wearing non-impregnated parkas over correctly worn PTBDUs. Ixodes ricinus ticks were collected by standard tick drags from 2009 to 2011, with high mean annual densities ranging from 28.9 to 106.5 ticks per 100 m(2), while single drags revealed tick densities between zero and 381 ticks per 100 m(2). Overall, 4596 I. ricinus ticks (54 ♂, 82 ♀, 1776 nymphs, and 2684 larvae) were collected, of which 128 (2.8 %; mean annual range, 0-10.1 %) were Borrelia burgdorferi s.l. positive. The Borrelia genospecies distribution was as follows: 112 (87.5 %) Borrelia afzelii, 10 (7.8 %) B. burgdorferi s.s., and 6 (4.7 %) Borrelia garinii. Neither the tick density means from 2009 to 2011 nor associated B. burgdorferi s.l. prevalences differed significantly among the military locations investigated. The documented tick bite reductions clearly demonstrate the powerful protective effectiveness of properly worn PTBDUs against tick bites. Nevertheless, all apparel worn over PTBDUs should also be impregnated with permethrin in order to prevent tick infestation and subsequent bites.

Examining evidence on dog bite injuries and their management in children.

PubMed

Elizabeth Murray, Gemma

2017-04-11

Dog bites are common injuries in children. The effects of such injuries can be devastating for the children concerned and their families. It is therefore important to provide holistic care and to consider psychological well-being as well as physical recovery. There should be clear guidelines for professionals about reporting dog bites and safeguarding. The literature recommends primary closure of the dog bite wound unless an infection is present. Literature also suggests that prophylactic antibiotics are ineffective in preventing infection except in hand injuries, although they are still routinely used in practice. This article recommends further research, support and education on dog bites in children, as well as national guidelines.

[Bites of venomous snakes in Switzerland].

PubMed

Plate, Andreas; Kupferschmidt, Hugo; Schneemann, Markus

2016-06-08

Although snake bites are rare in Europe, there are a constant number of snake bites in Switzerland. There are two domestic venomous snakes in Switzerland: the aspic viper (Vipera aspis) and the common European adder (Vipera berus). Bites from venomous snakes are caused either by one of the two domestic venomous snakes or by an exotic venomous snake kept in a terrarium. Snake- bites can cause both a local and/or a systemic envenoming. Potentially fatal systemic complications are related to disturbances of the hemostatic- and cardiovascular system as well as the central or peripheral nervous system. Beside a symptomatic therapy the administration of antivenom is the only causal therapy to neutralize the venomous toxins.

Bite by a dog under provocation: is it free from risk?

PubMed

Dutta, J K

2002-05-01

There is a common belief that rabid dogs bite without provocation, hence a dog bite under provocation is free from the risk of rabies. This is not always true as is evident from the case report narrated below. Here in this article, a man of 38 years was bitten by a dog under provocation. He developed rabies 4 months after the bite and subsequently died. Autopsy revealed Negri bodies from the brain tissue.

Patients' and therapists' experiences of general change mechanisms during bug-in-the-eye and delayed video-based supervised cognitive-behavioral therapy. A randomized controlled trial.

PubMed

Probst, Thomas; Jakob, Marion; Kaufmann, Yvonne M; Müller-Neng, Julia M B; Bohus, Martin; Weck, Florian

2018-04-01

This secondary analysis of a randomized controlled trial investigated whether bug-in-the-eye (BITE) supervision (live computer-based supervision during a psychotherapy session) affects the manner in which patients and therapists experience general change mechanisms (GCMs) during cognitive-behavioral therapy (CBT). A total of 23 therapists were randomized either to the BITE condition or the control condition (delayed video-based [DVB] supervision). After each session, both patients (BITE: n = 19; DVB: n = 23) and therapists (BITE: n = 11; DVB: n = 12) completed the Helping Alliance Questionnaire (HAQ) and the Bernese Post Session Report (BPSR). The HAQ total score and the 3 secondary factors of the BPSR (interpersonal experiences, intrapersonal experiences, problem actuation) functioned as GCMs. Multilevel models were performed. For patients, GCMs did not develop differently between BITE and DVB during CBT. Therapists rated the alliance as well as interpersonal and intrapersonal experiences not significantly different between BITE and DVB during CBT, but they perceived problem actuation to increase significantly more in BITE than in DVB (p < .05). BITE supervision might be helpful in encouraging CBT therapists to apply interventions, which focus on the activation of relevant problems and related emotions. © 2017 Wiley Periodicals, Inc.

Dental image replacement on cone beam computed tomography with three-dimensional optical scanning of a dental cast, occlusal bite, or bite tray impression.

PubMed

Kang, S-H; Lee, J-W; Lim, S-H; Kim, Y-H; Kim, M-K

2014-10-01

The goal of the present study was to compare the accuracy of dental image replacement on a cone beam computed tomography (CBCT) image using digital image data from three-dimensional (3D) optical scanning of a dental cast, occlusal bite, and bite tray impression. A Bracket Typodont dental model was used. CBCT of the dental model was performed and the data were converted to stereolithography (STL) format. Three experimental materials, a dental cast, occlusal bite, and bite tray impression, were optically scanned in 3D. STL files converted from the CBCT of the Typodont model and the 3D optical-scanned STL files of the study materials were image-registered. The error range of each methodology was measured and compared with a 3D optical scan of the Typodont. For the three materials, the smallest error observed was 0.099±0.114mm (mean error±standard deviation) for registering the 3D optical scan image of the dental cast onto the CBCT dental image. Although producing a dental cast can be laborious, the study results indicate that it is the preferred method. In addition, an occlusal bite is recommended when bite impression materials are used. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Condylar position analysis with a new electronic condylar position measuring instrument E-CPM: influence of different examiners and a working bite on reproducibility.

PubMed

Vahle-Hinz, K; Rybczynski, A; Jakstat, H; Ahlers, M O

2009-01-01

Condylar position analysis facilitates a quantitative comparison of the condylar position with and without a bite record, different records and changed influencing factors. Handling by the examiner when positioning the model is a significant factor with regard to the accuracy of the examination. Measurement accuracy could be improved when positioning the models by using special working bites, hence the objective of the experiments described in this study consisted in examining the extent to which the measuring results are influenced by different examiners and by using working bites. In the first trial, one examiner performed ten measurements without and with an interposed working bite for five model pairs in each case. In the second trial, nine examiners (three specialized dentists, three dental assistants, three students) performed ten measurements in each case without and with an interposed working bite. The three-dimensional position was read digitally with the E-CPM (Gamma Dental, Klosterneuburg/Vienna, Austria), recorded by means of spreadsheet software (Microsoft Excel) and diagnostic software (CMDfact, CMD3D module, dentaConcept, Hamburg), and evaluated with graphing software (Sigma Plot, Systat Software, USA). In the first trial, it was shown that the reproducibility of mounting was improved markedly (p <0.01) by using bite records in the form of working bites. In the second trial, it was shown that the mean error increased significantly (p <0.01) when several examiners performed the measurements compared with the results of one examiner alone. No significantly different results occurred (p < 0.01) in the comparison of the different groups of examiners with different educational and training backgrounds. This applied for the mounting methods without and with working bite. On the other hand, the reproducibility of mounting improved distinctly (p<0.01) in every group of examiners when working bites were used. Reproducibility of condylar position analysis was improved significantly by mounting the models with special working bites. This applied for operators of different professional background (dentists, dental assistants and dental students), while there were no significant differences between results of the three groups.

Factors Associated With Bites to a Child From a Dog Living in the Same Home: A Bi-National Comparison.

PubMed

Messam, Locksley L McV; Kass, Philip H; Chomel, Bruno B; Hart, Lynette A

2018-01-01

We conducted a veterinary clinic-based retrospective cohort study aimed at identifying child-, dog-, and home-environment factors associated with dog bites to children aged 5-15 years old living in the same home as a dog in Kingston, Jamaica (236) and San Francisco, USA (61). Secondarily, we wished to compare these factors to risk factors for dog bites to the general public. Participant information was collected via interviewer-administered questionnaire using proxy respondents. Data were analyzed using log-binomial regression to estimate relative risks and associated 95% confidence intervals (CIs) for each exposure-dog bite relationship. Exploiting the correspondence between X% confidence intervals and X% Bayesian probability intervals obtained using a uniform prior distribution, for each exposure, we calculated probabilities of the true (population) RRs ≥ 1.25 or ≤0.8, for positive or negative associations, respectively. Boys and younger children were at higher risk for bites, than girls and older children, respectively. Dogs living in a home with no yard space were at an elevated risk (RR = 2.97; 95% CI: 1.06-8.33) of biting a child living in the same home, compared to dogs that had yard space. Dogs routinely allowed inside for some portion of the day (RR = 3.00; 95% CI: 0.94-9.62) and dogs routinely allowed to sleep in a family member's bedroom (RR = 2.82; 95% CI: 1.17-6.81) were also more likely to bite a child living in the home than those that were not. In San Francisco, but less so in Kingston, bites were inversely associated with the number of children in the home. While in Kingston, but not in San Francisco, smaller breeds and dogs obtained for companionship were at higher risk for biting than larger breeds and dogs obtained for protection, respectively. Overall, for most exposures, the observed associations were consistent with population RRs of practical importance (i.e., RRs ≥ 1.25 or ≤0.8). Finally, we found substantial consistency between risk factors for bites to children and previously reported risk factors for general bites.

Judgements about the relation between force and trajectory variables in verbally described ballistic projectile motion.

PubMed

White, Peter A

2013-01-01

How accurate are explicit judgements about familiar forms of object motion, and how are they made? Participants judged the relations between force exerted in kicking a soccer ball and variables that define the trajectory of the ball: launch angle, maximum height attained, and maximum distance reached. Judgements tended to conform to a simple heuristic that judged force tends to increase as maximum height and maximum distance increase, with launch angle not being influential. Support was also found for the converse prediction, that judged maximum height and distance tend to increase as the amount of force described in the kick increases. The observed judgemental tendencies did not resemble the objective relations, in which force is a function of interactions between the trajectory variables. This adds to a body of research indicating that practical knowledge based on experiences of actions on objects is not available to the processes that generate judgements in higher cognition and that such judgements are generated by simple rules that do not capture the objective interactions between the physical variables.

Post-hurricane Rita mosquito surveillance and the efficacy of Air Force aerial applications for mosquito control in east Texas.

PubMed

Breidenbaugh, Mark S; Haagsma, Karl A; Walker, Wes W; Sanders, David M

2008-06-01

Post-Hurricane Rita mosquito surveillance was carried out in 4 east Texas counties to determine mosquito abundance, species composition, and need for mosquito control. Subsequently, aerial applications of naled (Dibrom) for mosquito control were made by the Air Force Aerial Spray Flight, while continued surveillance documented the efficacy of the applications. Psorophora columbiae was the predominant species in landing counts. Twenty-two mosquito species were represented in light trap collections with Aedes atlanitcus/tormentor, Culex nigripalpus, Ae. vexans, and Ps. columbiae making up 91% of the total. A total of 102,001 ha (252,052 acres) were aerially treated based on high mosquito abundance, exposure of first responders and residents to nuisance biting, and local interruption of electric utilities. A significant 90% decline in mosquito abundance was observed posttreatment.

Dramatic increase in sea otter mortality from white sharks in California

USGS Publications Warehouse

Tinker, M. Tim; Hatfield, Brian B.; Harris, Michael D.; Ames, Jack A.

2016-01-01

Although southern sea otters (Enhydra lutris nereis) are not considered prey for white sharks (Carcharodon carcharias), sharks do nonetheless bite sea otters. We analyzed spatial and temporal trends in shark bites on sea otters in California, assessing the frequency of shark bite wounds in 1,870 carcasses collected since 1985. The proportion of stranded sea otters having shark bites has increased sharply since 2003, and white shark bites now account for >50% of recovered carcasses. The trend was most pronounced in the southern part of the range, from Estero Bay to Point Conception, where shark bite frequency has increased eightfold. Seasonal trends were also evident: most shark-bitten carcasses are recovered in late summer and fall; however, the period of elevated shark bite frequency has lengthened. The causes of these trends are unclear, but possible contributing factors include increased white shark abundance and/or changes in white shark behavior and distribution. In particular, the spatiotemporal patterns of shark-bitten sea otters match increases in pinniped populations, and the increased availability of marine mammal prey for white sharks may have led to more sharks spending more time in nearshore waters utilized by both sea otters and pinnipeds.

The effect of short-term prevention on the subsequent rate of crib-biting in thoroughbred horses.

PubMed

McGreevy, P D; Nicol, C J

1998-11-01

The results of an experimental study of the motivational consequences of short-term prevention of crib-biting are reported here. Eight test horses wore a cribbing collar for 24 h. This was effective in preventing crib-biting in 6 subjects. Using analysis of co-variance that accounted for baseline differences in crib-biting rate, test horses showed significantly more crib-biting than control horses on the first day after prevention (P < 0.05). There was also a highly significant increase in the crib-biting rate of test horses on the first day after prevention in comparison with their baseline rate (P < 0.01). This defines the increase as a post inhibitory rebound. An increase in the novelty of the cribbing bar and an increase in feeding motivation during the period of prevention are rejected as explanations of the rebound in this study. Instead, it is suggested that the rebound reflected a rise in internal motivation to crib-bite during the period of prevention. Behaviours that exhibit this pattern of motivation are generally considered functional; and it has been argued that their prevention may compromise welfare.

Factors associated with the prevalence of anterior open bite among preschool children: A population-based study in Brazil

PubMed Central

Machado, Daniella Borges; Brizon, Valéria Silva Cândido; Ambrosano, Gláucia Maria Bovi; Madureira, Davidson Fróis; Gomes, Viviane Elisângela; de Oliveira, Ana Cristina Borges

2014-01-01

INTRODUCTION: The aim of this study was to identify factors associated with the prevalence of anterior open bite among five-year-old Brazilian children. METHODS: A cross-sectional study was undertaken using data from the National Survey of Oral Health (SB Brazil 2010). The outcome variable was anterior open bite classified as present or absent. The independent variables were classified by individual, sociodemographic and clinical factors. Data were analyzed through bivariate and multivariate analysis using SPSS statistical software (version 18.0) with a 95% level of significance. RESULTS: The prevalence of anterior open bite was 12.1%. Multivariate analysis showed that preschool children living in Southern Brazil had an increased chance of 1.8 more times of having anterior open bite (CI 95%: 1.16 - 3.02). Children identified with alterations in overjet had 14.6 times greater chances of having anterior open bite (CI 95%: 8.98 - 24.03). CONCLUSION: There was a significant association between anterior open bite and the region of Brazil where the children lived, the presence of altered overjet and the prevalence of posterior crossbite. PMID:25715723

Hand digit control in children: motor overflow in multi-finger pressing force vector space during maximum voluntary force production.

PubMed

Shim, Jae Kun; Karol, Sohit; Hsu, Jeffrey; de Oliveira, Marcio Alves

2008-04-01

The aim of this study was to investigate the contralateral motor overflow in children during single-finger and multi-finger maximum force production tasks. Forty-five right handed children, 5-11 years of age produced maximum isometric pressing force in flexion or extension with single fingers or all four fingers of their right hand. The forces produced by individual fingers of the right and left hands were recorded and analyzed in four-dimensional finger force vector space. The results showed that increases in task (right) hand finger forces were linearly associated with non-task (left) hand finger forces. The ratio of the non-task hand finger force magnitude to the corresponding task hand finger force magnitude, termed motor overflow magnitude (MOM), was greater in extension than flexion. The index finger flexion task showed the smallest MOM values. The similarity between the directions of task hand and non-task hand finger force vectors in four-dimensional finger force vector space, termed motor overflow direction (MOD), was the greatest for index and smallest for little finger tasks. MOM of a four-finger task was greater than the sum of MOMs of single-finger tasks, and this phenomenon was termed motor overflow surplus. Contrary to previous studies, no single-finger or four-finger tasks showed significant changes of MOM or MOD with the age of children. We conclude that the contralateral motor overflow in children during finger maximum force production tasks is dependent upon the task fingers and the magnitude and direction of task finger forces.

Taking the Bite Out of Vector-Borne Diseases

MedlinePlus

... the 'Bite' Out of Vector-Borne Diseases Inside Life Science View All Articles | Inside Life Science Home Page Taking the 'Bite' Out of Vector- ... Science Solving the Sleeping Sickness 'Mystery' This Inside Life Science article also appears on LiveScience . Learn about related ...

Attempted suicide by snake bite: A case study.

PubMed

Mallik, Subhendu; Singh, Sudipta Ranjan; Mohanty, Manoj Kumar; Padhy, Niranjan

2016-07-14

Snake bite is an important public health issue in India and is almost always accidental in manner. Suicide by snake bite or injection of snake venom is extremely rare. Suicidal ideation and behavior is known to be influenced by various socio-economic and psychological factors. The method employed for suicide is also influenced by the occupation of the victim. We report a case where a snake charmer had attempted suicide by inflicting a bite by a monocled cobra. © The Author(s) 2016.

Level and pattern of human rabies and dog bites in Techiman Municipality in the Middle Belt of Ghana: a six year retrospective records review

PubMed Central

Punguyire, Damien Tioyire; Osei-Tutu, Anthony; Aleser, Emmanuel Vikpenibe; Letsa, Timothy

2017-01-01

Introduction Rabies is a viral zoonotic disease that is transmitted primarily by bites from rabid dogs and has the highest case fatality rate of most infectious diseases in humans. We described a 6-year trend of rabies and dog bites in a peri-urban district in Ghana. Methods A record review was conducted in the health facilities in Techiman to identify all human rabies and dog bite cases reported from January 2011 to December 2016. Rabies and dog bite data were extracted from health facilities records. Vaccination status of implicated dogs was extracted from the veterinary records at the Techiman Disease Investigation Farm. Data were summarized using proportions and presented using tables, charts and figures. Results Thirteen (13) cases of human rabies were recorded from 2011 to 2016. Complete data was available for 10 cases. Median age of rabies victims was 30 (range 3-80 years). A majority were males (8 representing 61.5%). Eight cases came from rural farming communities, 8 had a previous history of dog bite ranging from two weeks to five months before the onset of rabies symptoms and one reported with non-bite rabies. Case fatality was 100%. A total of 680 dog bites were reported by health facilities. About 50.3% (342) of the victims were males, a majority of bites (47.9%) occurred among children aged 1-15 years. Positive rabies cases among offending dogs ranged from 3.3% in 2016 to 17.6% in 2014. Conclusion Mass vaccination of dogs and provision of post-exposure vaccination are needed to reduce rabies transmission. PMID:29942413

Long-term complications of rattlesnake bites: a telephone survey from Central California.

PubMed

Spano, Susanne J; Vohra, Rais; Macias, Fernando

2014-06-01

The purpose of this institutional review board-approved, cross-sectional study was to identify residual symptoms and signs of envenomation reported by snakebite survivors via a telephone survey. Victims of rattlesnake bite who were treated at a single hospital center during a 10-year period were contacted through a telephone survey. Study subjects were included through a diagnosis-based retrospective chart review of snakebite victims, and excluded if they did not receive rattlesnake antivenom. Data collection was done using a standardized form that included sections about residual, recurrent, or new pain, weakness, paresthesias, or other limitations of the bitten limb. We identified 46 snakebite cases including 5 of 46 "dry" bites. The remaining cases (41 of 46) all received Crofab. Interviews were completed for 31% of these patients (13 of 41), and the remainder were lost to follow-up. Most bites occurred in men (12 cases, 92% males) and on the arms (9 cases, 69%). Six of the 13 respondents (46%) reported residual symptoms from the bite. Persistent symptoms described included localized pain at the bite site (3 cases), numbness or paresthesias (2 cases), abnormal skin peeling and discoloration at the bite site (2 cases), and persistent weakness of the bitten extremity (1 case). Among patients reporting persistent symptoms, the bite-to-survey interval ranged from 7 months to 12 years, with a median interval of 4 years. Our study population demonstrated a notable incidence (43%) of self-reported persistent symptoms related to their rattlesnake bites, although the overall level of disability from these injuries seems low. Copyright © 2014 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

To bite or not to bite! A questionnaire-based survey assessing why some people are bitten more than others by midges

PubMed Central

2010-01-01

Background The Scottish biting midge, Culicoides impunctatus, responsible for more than 90% of biting attacks on human beings in Scotland, is known to demonstrate a preference for certain human hosts over others. Methods In this study we used a questionnaire-based survey to assess the association between people's perception of how badly they get bitten by midges and their demographic, lifestyle and health related characteristics. Results Most people (85.8%) reported being bitten sometimes, often or always with only 14.2% reporting never being bitten by midges when in Scotland. There was no association between level of bites received and age, smoking, diet, exercise, medication, eating strongly flavoured foods or alcohol consumption. However, there was a strong association between the probability of being bitten and increasing height (in men) and BMI (in women). A large proportion of participants (33.8%) reported experiencing a bad/severe reaction to midge bites while 53.1% reported a minor reaction and 13.1% no reaction at all. Also, women tend to react more than men to midge bites. Additionally, the results indicated that the susceptibility to being bitten by midges is hereditary. Conclusions This study suggests that midges prefer to bite men that are tall and women that have a large BMI, and that the tendency for a child to be bitten or not could be inherited from their parent. The study is questionnaire-based; therefore, the interpretation of the results may be limited by the subjectivity of the answers given by the respondents. Although the results are relevant only to the Scottish biting midge, the approach used here could be useful for investigating human-insect interactions for other insects, particularly those which transmit pathogens that cause disease. PMID:20500852

Jaw-muscle fiber architecture in tufted capuchins favors generating relatively large muscle forces without compromising jaw gape.

PubMed

Taylor, Andrea B; Vinyard, Christopher J

2009-12-01

Tufted capuchins (sensu lato) are renowned for their dietary flexibility and capacity to exploit hard and tough objects. Cebus apella differs from other capuchins in displaying a suite of craniodental features that have been functionally and adaptively linked to their feeding behavior, particularly the generation and dissipation of relatively large jaw forces. We compared fiber architecture of the masseter and temporalis muscles between C. apella (n=12) and two "untufted" capuchins (C. capucinus, n=3; C. albifrons, n=5). These three species share broadly similar diets, but tufted capuchins occasionally exploit mechanically challenging tissues. We tested the hypothesis that tufted capuchins exhibit architectural properties of their jaw muscles that facilitate relatively large forces including relatively greater physiologic cross-sectional areas (PCSA), more pinnate fibers, and lower ratios of mass to tetanic tension (Mass/P(0)). Results show some evidence supporting these predictions, as C. apella has relatively greater superficial masseter and temporalis PCSAs, significantly so only for the temporalis following Bonferroni adjustment. Capuchins did not differ in pinnation angle or Mass/P(0). As an architectural trade-off between maximizing muscle force and muscle excursion/contraction velocity, we also tested the hypothesis that C. apella exhibits relatively shorter muscle fibers. Contrary to our prediction, there are no significant differences in relative fiber lengths between tufted and untufted capuchins. Therefore, we attribute the relatively greater PCSAs in tufted capuchins primarily to their larger muscle masses. These findings suggest that relatively large jaw-muscle PCSAs can be added to the suite of masticatory features that have been functionally linked to the exploitation of a more resistant diet by C. apella. By enlarging jaw-muscle mass to increase PCSA, rather than reducing fiber lengths and increasing pinnation, tufted capuchins appear to have increased jaw-muscle and bite forces without markedly compromising muscle excursion and contraction velocity. One performance advantage of this morphology is that it promotes relatively large bite forces at wide jaw gapes, which may be useful for processing large food items along the posterior dentition. We further hypothesize that this morphological pattern may have the ecological benefit of facilitating the dietary diversity seen in tufted capuchins. Lastly, the observed feeding on large objects, coupled with a jaw-muscle architecture that facilitates this behavior, raises concerns about utilizing C. apella as an extant behavioral model for hominins that might have specialized on small objects in their diets.

Effect of combined actions of hip adduction/abduction on the force generation and maintenance of pelvic floor muscles in healthy women

PubMed Central

Amorim, Amanda C.; Cacciari, Licia P.; Passaro, Anice C.; Silveira, Simone R. B.; Amorim, Cesar F.; Loss, Jefferson F.

2017-01-01

Pelvic floor muscle (PFM) force and coordination are related to urinary incontinence severity and to sexual satisfaction. Health professionals frequently combine classic PFM exercises with hip adduction/abduction contraction to treat these disorders, but the real benefits of this practice are still unknown. Based on a theoretical anatomy approach whereby the levator ani muscle is inserted into the obturator internus myofascia and in which force generated by hip movements should increase the contraction quality of PFMs, our aim was to investigate the effects of isometric hip adduction and abduction on PFM force generation. Twenty healthy, nulliparous women were evaluated using two strain-gauge dynamometers (one cylinder-like inside the vaginal cavity, and the other measuring hip adduction/abduction forces around both thighs) while performing three different tasks: (a) isolated PFM contraction; (b) PFM contraction combined with hip adduction (30% and 50% maximum hip force); and (c) PFM contraction combined with hip abduction (30% and 50% maximum hip force). Data were sampled at 100Hz and subtracted from the offset if existent. We calculated a gradient between the isolated PFM contraction and each hip condition (Δ Adduction and Δ Abduction) for all variables: Maximum force (N), instant of maximum-force occurrence (s), mean force in an 8-second window (N), and PFM force loss (N.s). We compared both conditions gradients in 30% and 50% by paired t-tests. All variables did not differ between hip conditions both in 30% and 50% of maximum hip force (p>.05). PFM contraction combined with isometric hip abduction did not increase vaginal force in healthy and nulliparous women compared to PFM contraction combined with isometric hip adduction. Therefore, so far, the use of hip adduction or abduction in PFM training and treatments are not justified for improving PFM strength and endurance. PMID:28542276

Effect of combined actions of hip adduction/abduction on the force generation and maintenance of pelvic floor muscles in healthy women.

PubMed

Amorim, Amanda C; Cacciari, Licia P; Passaro, Anice C; Silveira, Simone R B; Amorim, Cesar F; Loss, Jefferson F; Sacco, Isabel C N

2017-01-01

Pelvic floor muscle (PFM) force and coordination are related to urinary incontinence severity and to sexual satisfaction. Health professionals frequently combine classic PFM exercises with hip adduction/abduction contraction to treat these disorders, but the real benefits of this practice are still unknown. Based on a theoretical anatomy approach whereby the levator ani muscle is inserted into the obturator internus myofascia and in which force generated by hip movements should increase the contraction quality of PFMs, our aim was to investigate the effects of isometric hip adduction and abduction on PFM force generation. Twenty healthy, nulliparous women were evaluated using two strain-gauge dynamometers (one cylinder-like inside the vaginal cavity, and the other measuring hip adduction/abduction forces around both thighs) while performing three different tasks: (a) isolated PFM contraction; (b) PFM contraction combined with hip adduction (30% and 50% maximum hip force); and (c) PFM contraction combined with hip abduction (30% and 50% maximum hip force). Data were sampled at 100Hz and subtracted from the offset if existent. We calculated a gradient between the isolated PFM contraction and each hip condition (Δ Adduction and Δ Abduction) for all variables: Maximum force (N), instant of maximum-force occurrence (s), mean force in an 8-second window (N), and PFM force loss (N.s). We compared both conditions gradients in 30% and 50% by paired t-tests. All variables did not differ between hip conditions both in 30% and 50% of maximum hip force (p>.05). PFM contraction combined with isometric hip abduction did not increase vaginal force in healthy and nulliparous women compared to PFM contraction combined with isometric hip adduction. Therefore, so far, the use of hip adduction or abduction in PFM training and treatments are not justified for improving PFM strength and endurance.

Force-Velocity Relationship of Upper Body Muscles: Traditional Versus Ballistic Bench Press.

PubMed

García-Ramos, Amador; Jaric, Slobodan; Padial, Paulino; Feriche, Belén

2016-04-01

This study aimed to (1) evaluate the linearity of the force-velocity relationship, as well as the reliability of maximum force (F0), maximum velocity (V0), slope (a), and maximum power (P0); (2) compare these parameters between the traditional and ballistic bench press (BP); and (3) determine the correlation of F0 with the directly measured BP 1-repetition maximum (1RM). Thirty-two men randomly performed 2 sessions of traditional BP and 2 sessions of ballistic BP during 2 consecutive weeks. Both the maximum and mean values of force and velocity were recorded when loaded by 20-70% of 1RM. All force-velocity relationships were strongly linear (r > .99). While F0 and P0 were highly reliable (ICC: 0.91-0.96, CV: 3.8-5.1%), lower reliability was observed for V0 and a (ICC: 0.49-0.81, CV: 6.6-11.8%). Trivial differences between exercises were found for F0 (ES: < 0.2), however the a was higher for the traditional BP (ES: 0.68-0.94), and V0 (ES: 1.04-1.48) and P0 (ES: 0.65-0.72) for the ballistic BP. The F0 strongly correlated with BP 1RM (r: 0.915-0.938). The force-velocity relationship is useful to assess the upper body maximal capabilities to generate force, velocity, and power.

Use of forensic analysis to better understand shark attack behaviour.

PubMed

Ritter, E; Levine, M

2004-12-01

Shark attacks have primarily been analyzed from wound patterns, with little knowledge of a shark's approach, behaviour and intention leading to such wounds. For the first time, during a shark-human interaction project in South Africa, a white shark, Carcharodon carcharias, was filmed biting a vertically positioned person at the water surface, and exhibiting distinct approach patterns leading to the bite. This bite was compared to ten white shark attacks that occurred (i) in the same geographical area of South Africa, and (ii) where the same body parts were bitten. Close similarity of some of these wound patterns to the bite imprint of the videotaped case indicate that the observed behaviour of the white shark may represent a common pattern of approaching and biting humans.

Multiple lesions by vampire bat bites in a patient in Niterói, Brazil - Case report*

PubMed Central

Bernardes, Fred; Martins, Gustavo; Luchi, Gustavo Sabaini; Kac, Bernard Kawa; Nery, José Augusto da Costa; Azulay-Abulafia, Luna; Azulay, David Rubem

2014-01-01

Over the last few centuries, the expansion of urbanization brought bats closer to urbanized areas, increasing the risk of accidents by bat bites. The morphology of bat bites can be varied, usually having an elliptical shape, about 0.5 cm along its greatest length, and the characteristic corkscrew bite pattern. The authors present the case of a patient who was repeatedly bitten by vampire bats for two months. A polymerase chain reaction was performed in the cutaneous nerves at the base of the hair follicles which showed negativity towards the rabies virus. The authors highlight the public health importance of this case, and discuss the morphological characteristics of these hematophagous bat bites. PMID:24770518

Transient response of multidegree-of-freedom linear systems to forcing functions with inequality constraints

NASA Technical Reports Server (NTRS)

Michalopoulos, C. D.

1974-01-01

Optimal control theory is applied to analyze the transient response of discrete linear systems to forcing functions with unknown time dependence but having known bounds. Particular attention is given to forcing functions which include: (1) maximum displacement of any given mass element, (2) maximum relative displacement of any two adjacent masses, and (3) maximum acceleration of a given mass. Linear mechanical systems with an arbitrary number of degrees of freedom and only one forcing function acting are considered. In the general case, the desired forcing function is found to be a function that switches from the upper-to-lower bound and vice-versa at certain moments of time. A general procedure for finding such switching times is set forth.

Validity and reliability of the abdominal test and evaluation systems tool (ABTEST) to accurately measure abdominal force.

PubMed

Glenn, Jordan M; Galey, Madeline; Edwards, Abigail; Rickert, Bradley; Washington, Tyrone A

2015-07-01

Ability to generate force from the core musculature is a critical factor for sports and general activities with insufficiencies predisposing individuals to injury. This study evaluated isometric force production as a valid and reliable method of assessing abdominal force using the abdominal test and evaluation systems tool (ABTEST). Secondary analysis estimated 1-repetition maximum on commercially available abdominal machine compared to maximum force and average power on ABTEST system. This study utilized test-retest reliability and comparative analysis for validity. Reliability was measured using test-retest design on ABTEST. Validity was measured via comparison to estimated 1-repetition maximum on a commercially available abdominal device. Participants applied isometric, abdominal force against a transducer and muscular activation was evaluated measuring normalized electromyographic activity at the rectus-abdominus, rectus-femoris, and erector-spinae. Test, re-test force production on ABTEST was significantly correlated (r=0.84; p<0.001). Mean electromyographic activity for the rectus-abdominus (72.93% and 75.66%), rectus-femoris (6.59% and 6.51%), and erector-spinae (6.82% and 5.48%) were observed for trial-1 and trial-2, respectively. Significant correlations for the estimated 1-repetition maximum were found for average power (r=0.70, p=0.002) and maximum force (r=0.72, p<0.001). Data indicate the ABTEST can accurately measure rectus-abdominus force isolated from hip-flexor involvement. Negligible activation of erector-spinae substantiates little subjective effort among participants in the lower back. Results suggest ABTEST is a valid and reliable method of evaluating abdominal force. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

The inducement of planetary boundary layer mass convergence associated with varying vorticity beneath tropospheric wind maximum

NASA Technical Reports Server (NTRS)

Johnson, D. R.

1984-01-01

The effects of the vorticity distribution are applied to study planetary boundary layer mass convergence beneath free tropospheric wind maximum. For given forcing by viscous and pressure gradient forces beneath a wind maximum, boundary layer cross stream mass transport is increased by anticyclonic vorticity on the right flank and decreased by cyclonic vorticity on the left flank. Such frictionally forced mass transport induces boundary layer mass convergence beneath the relative wind maximum. This result is related to the empirical rule that the most intense convection and severe weather frequently develop beneath the 500 mb zero relative vorticity isopleth.

Bullous reactions to bed bug bites reflect cutaneous vasculitis

USDA-ARS?s Scientific Manuscript database

This study evaluates bullous cutaneous reactions and sequential histopathology in an individual sensitized to bed bug bites in an effort to better understand the allergic response and histology associated with these bites. There was a progression of the inflammatory response across time ranging from...

Snake bite complicated by acute kidney injury secondary to necrotizing glomerulonephritis.

PubMed

Al Qahtani, Mohammad A; Altheaby, Abdulrahman; Al Anazi, T; Al Saad, Khaled; Binsalih, S; Al Helail, Mohammed

2014-11-01

We present a 38-year-old man who presented to the emergency department with complaints of a snake bite. He developed acute kidney injury (AKI) and the kidney biopsy showed necrotizing glomerulonephritis, which is rarely reported in AKI after snake bite.

Probability of Regenerating a Normal Limb After Bite Injury in the Mexican Axolotl (Ambystoma mexicanum).

PubMed

Thompson, Sierra; Muzinic, Laura; Muzinic, Christopher; Niemiller, Matthew L; Voss, S Randal

2014-06-01

Multiple factors are thought to cause limb abnormalities in amphibian populations by altering processes of limb development and regeneration. We examined adult and juvenile axolotls ( Ambystoma mexicanum ) in the Ambystoma Genetic Stock Center (AGSC) for limb and digit abnormalities to investigate the probability of normal regeneration after bite injury. We observed that 80% of larval salamanders show evidence of bite injury at the time of transition from group housing to solitary housing. Among 717 adult axolotls that were surveyed, which included solitary-housed males and group-housed females, approximately half presented abnormalities, including examples of extra or missing digits and limbs, fused digits, and digits growing from atypical anatomical positions. Bite injury likely explains these limb defects, and not abnormal development, because limbs with normal anatomy regenerated after performing rostral amputations. We infer that only 43% of AGSC larvae will present four anatomically normal looking adult limbs after incurring a bite injury. Our results show regeneration of normal limb anatomy to be less than perfect after bite injury.

Impact of a healthy nails program on nail-biting in Turkish schoolchildren: a controlled pretest-posttest study.

PubMed

Ergun, Ayse; Toprak, Rumeysa; Sisman, Fatma Nevin

2013-12-01

This study was conducted to examine the effect of a healthy nails program on nail-biting in Turkish schoolchildren. This quasi-experimental study was of pretest-posttest control group design. A total of 50 students of a primary school formed the intervention group, while 53 students from the same school formed the control group. Data were collected with a demographic form, a nail-biting follow-up form, and photographs of the fingernails. It was found that 68.9% of students were biting seven or more of their nails; 46.6% had damaged nail beds. In the intervention group, the rate of the children who were not biting their nails (baseline = 0%, 4th week = 56.0%, 8th week = 64.0%) increased significantly compared to the control group (baseline = 0%, 4th week = 15.1%, 8th week = 18.9%). Outcomes indicate the efficacy of the healthy nails program in reducing the nail-biting problem in schoolchildren.

Periocular dog bite injuries and responsible care.

PubMed

Burroughs, John R; Soparkar, Charles N S; Patrinely, James R; Williams, Patrick D; Holck, David E E

2002-11-01

To report patients who received dog bite injuries to the periocular area and the incidence of repeat attacks by the biting dog and its disposition. To discuss the demographics of bite attacks, occult injuries, steps to avoid medicolegal problems, and the appropriate options for animal disposition. Single-practice prospective case series of dog attacks on 18 victims. Patients were followed and questioned about any repeat attacks by the offending dog. Of 18 individuals who received dog bites to the perio-ocular area, only 2 were >12 years old. Of the 16 cases available for follow-up (4 months to 3 years; mean, 16 months), 7 of the dogs were euthanized and 1 was sent away from the family. Of the 8 remaining animals, 5 (63%) bit again. All the dogs bit family members or family friends. Although most dogs make wonderful pets, canine bites pose a significant public health concern, and some simple steps may be taken to protect against personal injury and legal fallout from repeat attacks.

Bite Injuries to the Hand - Review of the Literature

PubMed Central

Raval, Pradyumna; Khan, Wasim; Haddad, Behrooz; Mahapatra, Anant Narayan

2014-01-01

Patients presenting to the emergency department with bite injuries to the hand sustain them through a number of causes including domesticated as well as stray animal bites, and human bites commonly sustained as a result of violence. The nature of the injuries sustained can be very deceptive. A small tooth mark on the exterior can be a fulminant infection in the tissues deeper down. Tendon injuries, fractures of the metacarpals and phalanges and management of the wound are critical issues faced by a surgeon in dealing with such patients. Similarly the less common bite injuries to the hand, often with disastrous and sometimes fatal complications, do also present to the emergency department. A high incidence of suspicion is needed in dealing with these injuries effectively. In our article we discuss the common as well as uncommon causes of bite injuries to the hand and their management. In addition to reviewing the literature to ascertain the management of such injuries, we also discuss interesting and rare case reports. PMID:25097675

[Orofacial alterations and surface electromyography in neurodevelopmental disorders].

PubMed

Rosell-Clari, V

2017-02-24

Surface electromyography has become a widely used technique for measuring the activity of different muscle groups. Although the reliability and validity of the technique are discussed, there is an important body of scientific literature that defends the use of this technique. To present through a case study, the two basic uses of surface electromyography: the measurement of orofacial muscular activity and use it as biofeedback modulator of the muscular activity itself. A 10 years-old girl with a dolichocephalic and prognosis facial profile, anterior open bite and bilateral cross bite, bilateral Angle class II occlusion and atypical swallowing with lingual interposition. The MioTool Face by Miotec Suite 1.0, it could use until 8-channel bipolar surface electromyography. Surface electrodes were placed in the orofacial musculature and the results obtained were measured and visualized through the software Miograph and Biotrainer. The results confirm those obtained through the clinical exploration of the patient and support the use of these measurements for the estimation and validation of mechanical models of the masticatory and swallowing system. Electromyographic biofeedback is shown as an effective technique to self-control the force performed in key muscle groups by performing primary activities such as chewing and swallowing.

Comparisons of maximum deformation and failure forces at the implant–abutment interface of titanium implants between titanium-alloy and zirconia abutments with two levels of marginal bone loss

PubMed Central

2013-01-01

Background Zirconia materials are known for their optimal aesthetics, but they are brittle, and concerns remain about whether their mechanical properties are sufficient for withstanding the forces exerted in the oral cavity. Therefore, this study compared the maximum deformation and failure forces of titanium implants between titanium-alloy and zirconia abutments under oblique compressive forces in the presence of two levels of marginal bone loss. Methods Twenty implants were divided into Groups A and B, with simulated bone losses of 3.0 and 1.5 mm, respectively. Groups A and B were also each divided into two subgroups with five implants each: (1) titanium implants connected to titanium-alloy abutments and (2) titanium implants connected to zirconia abutments. The maximum deformation and failure forces of each sample was determined using a universal testing machine. The data were analyzed using the nonparametric Mann–Whitney test. Results The mean maximum deformation and failure forces obtained the subgroups were as follows: A1 (simulated bone loss of 3.0 mm, titanium-alloy abutment) = 540.6 N and 656.9 N, respectively; A2 (simulated bone loss of 3.0 mm, zirconia abutment) = 531.8 N and 852.7 N; B1 (simulated bone loss of 1.5 mm, titanium-alloy abutment) = 1070.9 N and 1260.2 N; and B2 (simulated bone loss of 1.5 mm, zirconia abutment) = 907.3 N and 1182.8 N. The maximum deformation force differed significantly between Groups B1 and B2 but not between Groups A1 and A2. The failure force did not differ between Groups A1 and A2 or between Groups B1 and B2. The maximum deformation and failure forces differed significantly between Groups A1 and B1 and between Groups A2 and B2. Conclusions Based on this experimental study, the maximum deformation and failure forces are lower for implants with a marginal bone loss of 3.0 mm than of 1.5 mm. Zirconia abutments can withstand physiological occlusal forces applied in the anterior region. PMID:23688204

Characterization of the aqueous extract of the root of Aristolochia indica: evaluation of its traditional use as an antidote for snake bites.

PubMed

Bhattacharjee, Payel; Bhattacharyya, Debasish

2013-01-09

The aqueous extract of the roots of Aristolochia indica is used as a decoction for the ailment of a number of diseases including snake bite treatment. Though the alcoholic extract of the different parts of the plant are well studied, information on the aqueous extract is limited. We have estimated aristolochic acid, different enzymes, enzyme inhibitors and anti-snake venom potency of its root extract. Reverse phase-HPLC was used to quantify aristolochic acid. Zymography, DQ-gelatin assay and atomic force microscopy were done to demonstrate gelatinase and collagenase activities of the extract. SDS-PAGE followed by MS/MS analysis revealed the identity of major protein components. Toxicity of the extract was estimated on animal model. Interaction of the extract with Russell's viper venom components was followed by Rayleigh scattering and enzyme assay. The aristolochic acid content of the root extract is 3.08 ± 1.88 × 10(-3)mg/ml. The extract possesses strong gelatinolytic, collagenase, peroxidase and nuclease activities together with l-amino acid oxidase and protease inhibitory potencies. Partial proteomic studies indicated presence of starch branching enzymes as major protein constituent of the extract. The extract did not show any acute and sub-chronic toxicity in animals at lower doses, but high dose causes liver and kidney damage. The extract elongated duration of survival of animals after application of Russell's viper venom. Considering the low aristolochic acid content of the extract, its consumption for a short time at moderate dose does not appear to cause serious toxicity. Strong inhibition of l-amino acid oxidase may give partial relief from snake bite after topical application of the extract. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

The Relationship between Cranial Structure, Biomechanical Performance and Ecological Diversity in Varanoid Lizards

PubMed Central

McCurry, Matthew R.; Mahony, Michael; Clausen, Phillip D.; Quayle, Michelle R.; Walmsley, Christopher W.; Jessop, Tim S.; Wroe, Stephen; Richards, Heather; McHenry, Colin R.

2015-01-01

Skull structure is intimately associated with feeding ability in vertebrates, both in terms of specific performance measures and general ecological characteristics. This study quantitatively assessed variation in the shape of the cranium and mandible in varanoid lizards, and its relationship to structural performance (von Mises strain) and interspecific differences in feeding ecology. Geometric morphometric and linear morphometric analyses were used to evaluate morphological differences, and finite element analysis was used to quantify variation in structural performance (strain during simulated biting, shaking and pulling). This data was then integrated with ecological classes compiled from relevant scientific literature on each species in order to establish structure-function relationships. Finite element modelling results showed that variation in cranial morphology resulted in large differences in the magnitudes and locations of strain in biting, shaking and pulling load cases. Gracile species such as Varanus salvadorii displayed high strain levels during shaking, especially in the areas between the orbits. All models exhibit less strain during pull back loading compared to shake loading, even though a larger force was applied (pull =30N, shake = 20N). Relationships were identified between the morphology, performance, and ecology. Species that did not feed on hard prey clustered in the gracile region of cranial morphospace and exhibited significantly higher levels of strain during biting (P = 0.0106). Species that fed on large prey clustered in the elongate area of mandible morphospace. This relationship differs from those that have been identified in other taxonomic groups such as crocodiles and mammals. This difference may be due to a combination of the open ‘space-frame’ structure of the varanoid lizard skull, and the ‘pull back’ behaviour that some species use for processing large prey. PMID:26106889

Pilot study assessing the effectiveness of long-lasting permethrin-impregnated clothing for the prevention of tick bites.

PubMed

Vaughn, Meagan F; Meshnick, Steven R

2011-07-01

Tick-borne diseases such as Lyme disease, Rocky Mountain spotted fever, and ehrlichiosis are a significant concern for many thousands of workers who have frequent and unavoidable exposure to tick-infested habitats. Many North Carolina state employees with outdoor occupations report multiple tick bites each year, indicating that existing tick preventive strategies may be underutilized or ineffective. Treatment of clothing with permethrin, a nontoxic chemical with insecticidal, knockdown, and repellent properties, is highly effective against ticks. However, most permethrin products must be reapplied after several washings to maintain insecticidal activity. Recently, a factory-based method for long-lasting permethrin impregnation of clothing has been developed by Insect Shield, Inc., that allows clothing to retain insecticidal activity for over 70 washes. A nonrandomized open label pilot study was conducted to determine the effectiveness of Insect Shield-treated clothing for the prevention of tick bites among 16 outdoor workers from the North Carolina Division of Water Quality under actual field conditions. Participants completed questionnaires at the start of follow-up (March, 2008) and at the end of follow-up (September, 2008), and tick bites and outdoor work hours were reported on weekly tick bite logs for the entire follow-up period. Subjects wearing Insect Shield-treated clothing had a 93% reduction (p < 0.0001) in the total incidence of tick bites compared to subjects using standard tick bite prevention measures. This study provides preliminary evidence that long-lasting permethrin-impregnated clothing may be highly effective against tick bites.

Clinical Features and Outcomes of Pasteurella multocida Infection

PubMed Central

Giordano, Antonio; Dincman, Toros; Clyburn, Benjamin E.; Steed, Lisa L.; Rockey, Don C.

2015-01-01

Abstract Pasteurella multocida, a zoonotic infectious organism, has most often been described in patients after an animal bite. Here, we characterize the clinical features and outcomes of P multocida infection in a large cohort of patients according to the presence or absence of an animal bite. We retrospectively searched MUSC's laboratory information system for all patients with positive P multocida cultures from 2000 to 2014. Extensive data were abstracted, including clinical and outcome data. The Charlson comorbidity index (CCI) was used to assess comorbidities among patients. We identified 44 patients with P multocida infections, including 25 with an animal bite. The average age was 64 years and the majority of patients were women (N = 30). There was no difference in age and sex distribution among those with and without a bite (P = 0.38 and 0.75, respectively). A CCI ≥1 was significantly associated with the absence of a bite (P = 0.006). Patients presenting without a bite were more frequently bacteremic (37% vs 4%, respectively, P = 0.001), and were hospitalized more often (84% vs 44%, respectively, P = 0.012). Of the 8 patients who required intensive care unit (ICU)-based care, 7 were non-bite-related. There were 4 deaths, all occurring in patients not bitten. P multocida infections not associated with an animal bite were often associated with bacteremia, severe comorbidity(ies), immune-incompetent states, the need for ICU management, and were associated with substantial mortality. PMID:26356688

A cross-sectional study for predicting tail biting risk in pig farms using classification and regression tree analysis.

PubMed

Scollo, Annalisa; Gottardo, Flaviana; Contiero, Barbara; Edwards, Sandra A

2017-10-01

Tail biting in pigs has been an identified behavioural, welfare and economic problem for decades, and requires appropriate but sometimes difficult on-farm interventions. The aim of the paper is to introduce the Classification and Regression Tree (CRT) methodologies to develop a tool for prevention of acute tail biting lesions in pigs on-farm. A sample of 60 commercial farms rearing heavy pigs were involved; an on-farm visit and an interview with the farmer collected data on general management, herd health, disease prevention, climate control, feeding and production traits. Results suggest a value for the CRT analysis in managing the risk factors behind tail biting on a farm-specific level, showing 86.7% sensitivity for the Classification Tree and a correlation of 0.7 between observed and predicted prevalence of tail biting obtained with the Regression Tree. CRT analysis showed five main variables (stocking density, ammonia levels, number of pigs per stockman, type of floor and timeliness in feed supply) as critical predictors of acute tail biting lesions, which demonstrate different importance in different farms subgroups. The model might have reliable and practical applications for the support and implementation of tail biting prevention interventions, especially in case of subgroups of pigs with higher risk, helping farmers and veterinarians to assess the risk in their own farm and to manage their predisposing variables in order to reduce acute tail biting lesions. Copyright © 2017 Elsevier B.V. All rights reserved.

Effects of breastfeeding and sucking habits on malocclusion in a birth cohort study.

PubMed

Peres, Karen Glazer; Barros, Aluísio J D; Peres, Marco Aurélio; Victora, César Gomes

2007-06-01

To estimate the prevalence of malocclusion and to examine the effects of breastfeeding and non-nutritive sucking habits on dentition in six-year-old children. A cross-sectional study was carried out nested into a birth cohort conducted in Pelotas, Southern Brazil, in 1999. A sample of 359 children was dentally examined and their mothers interviewed. Anterior open bite and posterior cross bite were recorded using the Foster & Hamilton criteria. Information regarding breastfeeding and non-nutritive sucking habits was collected at birth, in the first, third, sixth and 12th months of life, and at six years of age. Control variables included maternal schooling and child's birthweight, cephalic perimeter, and sex. Data were analyzed by Poisson regression. Prevalence of anterior open bite was 46.2%, and that of posterior cross bite was 18.2%. Non-nutritive sucking habits between 12 months and four years of age and digital sucking at age six years were the main risk factors for anterior open bite. Breastfeeding for less than nine months and regular use of pacifier between age 12 months and four years were risk factors for posterior cross bite. Interaction between duration of breastfeeding and the use of pacifier was identified for posterior cross bite. Given that breastfeeding is a protective factor for other diseases of infancy, our findings indicate that the common risks approach is the most appropriate for the prevention of posterior cross bite in primary or initial mixed dentition.

Occlusal force, electromyographic activity of masticatory muscles and mandibular flexure of subjects with different facial types

PubMed Central

CUSTODIO, William; GOMES, Simone Guimarães Farias; FAOT, Fernanda; GARCIA, Renata Cunha Matheus Rodrigues; DEL BEL CURY, Altair Antoninha

2011-01-01

Objective The aim of this study was to evaluate whether vertical facial patterns influence maximal occlusal force (MOF), masticatory muscle electromyographic (EMG) activity, and medial mandibular flexure (MMF). Material and Methods Seventy-eight dentate subjects were divided into 3 groups by Ricketts's analysis: brachyfacial, mesofacial and dolychofacial. Maximum occlusal force in the molar region was bilaterally measured with a force transducer. The electromyographic activities of the masseter and anterior temporal muscles were recorded during maximal voluntary clenching. Medial mandibular flexure was calculated by subtracting the intermolar distance of maximum opening or protrusion from the distance in the rest position. The data were analyzed using ANOVA followed by Tukey's HSD test. The significance level was set at 5%. Results Data on maximum occlusal force showed that shorter faces had higher occlusal forces (P<0.0001). Brachyfacial subjects presented higher levels of masseter electromyographic activity and medial mandibular flexure, followed by the mesofacial and dolychofacial groups. Additionally, dolychofacial subjects showed significantly lower electromyographic temporalis activities (P<0.05). Conclusion Within the limitations of the study, it may be concluded that maximum occlusal force, masticatory muscle activity and medial mandibular flexure were influenced by the vertical facial pattern. PMID:21655772

Functional Analysis and Treatment of Nail Biting

ERIC Educational Resources Information Center

Dufrene, Brad A.; Watson, T. Steuart; Kazmerski, Jennifer S.

2008-01-01

This study applied functional analysis methodology to nail biting exhibited by a 24-year-old female graduate student. Results from the brief functional analysis indicated variability in nail biting across assessment conditions. Functional analysis data were then used to guide treatment development and implementation. Treatment included a…

Development of botanical-based biopesticides and repellents against biting flies on livestock animals

USDA-ARS?s Scientific Manuscript database

Biting flies are important insect pests causing millions of dollars in losses to the livestock industry. The attack by biting flies causes significant losses in animal production and potential food contamination and disease transmission. This presentation reports our recent findings on the developme...

A case of Tinea nigra associated to a bite from a European rabbit (Oryctolagus cuniculus, Leporidae): the role of dermoscopy in diagnosis.

PubMed

Rossetto, André Luiz; Corrêa, Patricia Rossetto; Cruz, Rosana Cé Bella; Pereira, Eduardo Figueiredo; Haddad Filho, Vidal

2014-01-01

We report a case of Tinea nigra in an adolescent living in Itapema, Santa Catarina, Brazil, who presented a hyperchromic macule on the palm of the left hand, close to another erythematous macule caused by a rabbit bite. The patient received guidance on accidents and animal bites and evolved well treated with topical butenafine for the dermatomycosis. The authors also highlight the efficacy of the dermoscopic exam in diagnosing Tinea nigra with animal bite lesions and other traumas.

A case of Tinea nigra associated to a bite from a European rabbit (Oryctolagus cuniculus, Leporidae): the role of dermoscopy in diagnosis*

PubMed Central

Rossetto, André Luiz; Corrêa, Patricia Rossetto; Cruz, Rosana Cé Bella; Pereira, Eduardo Figueiredo; Haddad Junior, Vidal

2014-01-01

We report a case of Tinea nigra in an adolescent living in Itapema, Santa Catarina, Brazil, who presented a hyperchromic macule on the palm of the left hand, close to another erythematous macule caused by a rabbit bite. The patient received guidance on accidents and animal bites and evolved well treated with topical butenafine for the dermatomycosis. The authors also highlight the efficacy of the dermoscopic exam in diagnosing Tinea nigra with animal bite lesions and other traumas. PMID:24626667

Breaking the Thumb Sucking Habit: When Compliance Is Essential

PubMed Central

Tanaka, Orlando; Oliveira, Wagner; Galarza, Melissa; Aoki, Vanessa; Bertaiolli, Bruno

2016-01-01

The anterior open bite (AOB) and posterior cross bite are the most frequent malocclusions associated with prolonged sucking habits. This clinical case illustrates and discusses the use of a Haas-type palatal expander for stopping a thumb sucking habit. The improvement in closing the open bite with discontinuation of the habit was observed. But with the return of the habit and lack of cooperation, the relapse of anterior open bite occurred. Therefore, different approaches are necessary. The need of a multidisciplinary approach, consent, and cooperation are keys to a good prognosis. PMID:26904311

Simple and Efficient Technique for Correction of Unilateral Scissor Bite Using Straight Wire.

PubMed

Dolas, Siddhesh Gajanan; Chitko, Shrikant Shrinivas; Kerudi, Veerendra Virupaxappa; Patil, Harshal Ashok; Bonde, Prasad Vasudeo

2016-03-01

Unilateral scissor bite is a relatively rare malocclusion. However, its correction is often difficult and a challenge for the clinician. This article presents simple and efficient technique for the correction of severe unilateral scissor bite in a 14 year old boy, using 0.020 S.S. A. J. Wilcock wire (premium plus) out of the spool, with minimal adjustments and placed in mandibular arch. After about six weeks time, good amount of correction was seen in the lower arch and the lower molar had been relieved of scissor bite.

Sensitivity to bites by the bedbug, Cimex lectularius.

PubMed

Reinhardt, K; Kempke, D; Naylor, R A; Siva-Jothy, M T

2009-06-01

Bedbugs are a public health problem and can cause significant economic losses, but little is known about the effects of bites on humans. We reviewed case reports and published papers on bedbug bites to assess the empirical basis of the commonly cited figure that only approximately 80% of the population are sensitive to bedbug bites. We found the sensitivity estimate to be based on only one study carried out 80 years ago. However, this study did not account for the now well-established fact that only repeated exposure to external allergens leads to skin reactions. In our sample, 18 of 19 persons showed a skin reaction after bedbug exposure, but in most cases only after repeated controlled exposure. With repeated exposure, the latency between bite and skin reactions decreased from approximately 10 days to a few seconds. Our results are relevant for the hospitality industry, where apparently increasing infestation rates are likely to lead to an increase in the number of tourists and hotel employees exposed to bedbugs. Medical and public health professionals may expect to see an increase in the prevalence of people with bedbug bite sensitivity. The significance of the delayed reaction time of skin to bites may also have implications in litigation cases where people seek compensation.

Tick-host conflict: immunoglobulin E antibodies to tick proteins in patients with anaphylaxis to tick bite

PubMed Central

Mateos-Hernández, Lourdes; Villar, Margarita; Moral, Angel; GarcíaRodríguez, Carmen; Arias, Teresa Alfaya; de la Osa, Verónica; Brito, Francisco Feo; Fernández de Mera, Isabel G.; Alberdi, Pilar; Ruiz-Fons, Francisco; Cabezas-Cruz, Alejandro; Estrada-Peña, Agustín; de la Fuente, José

2017-01-01

Tick-borne infectious diseases and allergies are a growing problem worldwide. Tick bite allergy has been associated with the direct effect of immunoglobulin E (IgE) response to tick salivary antigens, or secondary to the induction of allergy to red meat consumption through IgE antibodies against the carbohydrate α-Gal (Gal α 1-3Gal β 1-(3)4GlcNAc-R). However, despite the growing burden of this pathology, the proteins associated with anaphylaxis to tick bite have not been characterized. To address this question, a comparative proteomics approach was used to characterize tick proteins producing an IgE antibody response in a healthy individual with record of tick bites, which had not resulted in any allergic reactions, and two patients with anaphylactic reactions to Rhipicephalus bursa or Hyalomma marginatum tick bites. Both patients and the healthy individual were red meat tolerant. The results supported a patient-specific IgE antibody response to tick species responsible for the anaphylaxis to tick bite. Both patients and the healthy individual serologically recognized tick proteins with and without α-Gal modifications, with proteins differentially recognized by patients but not control sera. These proteins could be used as potential antigens for diagnostics, treatment and prevention of tick bite-induced allergies. PMID:28423486

Development of a polymerase chain reaction to distinguish monocellate cobra (Naja khouthia) bites from other common Thai snake species, using both venom extracts and bite-site swabs.

PubMed

Suntrarachun, S; Pakmanee, N; Tirawatnapong, T; Chanhome, L; Sitprija, V

2001-07-01

A PCR technique was used in this study to identify and distinguish monocellate cobra snake bites using snake venoms and swab specimens from snake bite-sites in mice from bites by other common Thai snakes. The sequences of nucleotide primers were selected for the cobrotoxin-encoding gene from the Chinese cobra (Naja atra) since the sequences of monocellate cobra (Naja kaouthia) venom are still unknown. However, the 113-bp fragment of cDNA of the cobrotoxin-encoding gene was detected in the monocellate cobra venom using RT-PCR. This gene was not found in the venoms of Ophiophagus hannah (king cobra), Bungarus fasciatus (banded krait), Daboia russelii siamensis (Siamese Russell's Viper, and Calloselasma rhodostoma (Malayan pit viper). Moreover, direct PCR could detect a 665-bp fragment of the cobrotoxin-encoding gene in the monocellate cobra venom but not the other snake venoms. Likewise, this gene was only observed in swab specimens from cobra snake bite-sites in mice. This is the first report demonstrating the ability of PCR to detect the cobrotoxin-encoding gene from snake venoms and swab specimens. Further studies are required for identification of this and other snakes from the bite-sites on human skin.

The management of animal bites in the United kingdom.

PubMed

Evgeniou, E; Markeson, D; Iyer, S; Armstrong, A

2013-01-01

Animal bites represent a significant global health issue. The evidence in the literature regarding their management in many areas is conflicting and unclear. This project attempts to identify current evidence in the literature on the management of animal bites and assess if current practice in the United Kingdom is evidence based. A literature review on the management of animal bites was performed, and a national UK survey was contacted using a questionnaire based on the available evidence in the literature. The results from this survey show that 98% of plastic surgery units routinely use prophylactic antibiotics in all animal bite wounds; 58% close low-risk injuries primarily after initial washout, and there are conflicting opinions regarding the management of associated fractures and soft tissue injuries. The available data in the literature suggest that appropriate wound management is the most important factor for prevention of infection in animal bites. Antibiotic prophylaxis should only be given in high-risk wounds and primary closure should be performed in low-risk wounds. The management protocols of many plastic surgery units often diverge from the available evidence within the literature. On the basis of a thorough literature review, a guideline for the management of animal bites is presented. Future studies should investigate the management of associated fractures and soft tissue injuries.

Decrease in tick bite consultations and stabilization of early Lyme borreliosis in the Netherlands in 2014 after 15 years of continuous increase.

PubMed

Hofhuis, Agnetha; Bennema, Sita; Harms, Margriet; van Vliet, Arnold J H; Takken, Willem; van den Wijngaard, Cees C; van Pelt, Wilfrid

2016-05-23

Nationwide surveys have shown a threefold increase in general practitioner (GP) consultations for tick bites and early Lyme borreliosis from 1994 to 2009 in the Netherlands. We now report an update on 2014, with identical methods as for the preceding GP surveys. To all GPs in the Netherlands, a postal questionnaire was sent inquiring about the number of consultations for tick bites and erythema migrans diagnoses (most common manifestation of early Lyme borreliosis) in 2014, and the size of their practice populations. Contrasting to the previously rising incidence of consultations for tick bites between 1994 and 2009, the incidence decreased in 2014 to 488 consultations for tick bites per 100,000 inhabitants, i.e., 82,000 patients nationwide. This survey revealed a first sign of stabilization of the previously rising trend in GP diagnosed erythema migrans, with 140 diagnoses per 100,000 inhabitants of the Netherlands. This equals about 23,500 annual diagnoses of erythema migrans nationwide in 2014. In contrast to the constantly rising incidence of GP consultations for tick bites and erythema migrans diagnoses in the Netherlands between 1994 and 2009, the current survey of 2014 showed a first sign of stabilization of erythema migrans diagnoses and a decreased incidence for tick bite consultations.

Factors Associated With Bites to a Child From a Dog Living in the Same Home: A Bi-National Comparison

PubMed Central

Messam, Locksley L. McV.; Kass, Philip H.; Chomel, Bruno B.; Hart, Lynette A.

2018-01-01

We conducted a veterinary clinic-based retrospective cohort study aimed at identifying child-, dog-, and home-environment factors associated with dog bites to children aged 5–15 years old living in the same home as a dog in Kingston, Jamaica (236) and San Francisco, USA (61). Secondarily, we wished to compare these factors to risk factors for dog bites to the general public. Participant information was collected via interviewer-administered questionnaire using proxy respondents. Data were analyzed using log-binomial regression to estimate relative risks and associated 95% confidence intervals (CIs) for each exposure–dog bite relationship. Exploiting the correspondence between X% confidence intervals and X% Bayesian probability intervals obtained using a uniform prior distribution, for each exposure, we calculated probabilities of the true (population) RRs ≥ 1.25 or ≤0.8, for positive or negative associations, respectively. Boys and younger children were at higher risk for bites, than girls and older children, respectively. Dogs living in a home with no yard space were at an elevated risk (RR = 2.97; 95% CI: 1.06–8.33) of biting a child living in the same home, compared to dogs that had yard space. Dogs routinely allowed inside for some portion of the day (RR = 3.00; 95% CI: 0.94–9.62) and dogs routinely allowed to sleep in a family member’s bedroom (RR = 2.82; 95% CI: 1.17–6.81) were also more likely to bite a child living in the home than those that were not. In San Francisco, but less so in Kingston, bites were inversely associated with the number of children in the home. While in Kingston, but not in San Francisco, smaller breeds and dogs obtained for companionship were at higher risk for biting than larger breeds and dogs obtained for protection, respectively. Overall, for most exposures, the observed associations were consistent with population RRs of practical importance (i.e., RRs ≥ 1.25 or ≤0.8). Finally, we found substantial consistency between risk factors for bites to children and previously reported risk factors for general bites. PMID:29780810

Correlation of Descriptive Analysis and Instrumental Puncture Testing of Watermelon Cultivars.

PubMed

Shiu, J W; Slaughter, D C; Boyden, L E; Barrett, D M

2016-06-01

The textural properties of 5 seedless watermelon cultivars were assessed by descriptive analysis and the standard puncture test using a hollow probe with increased shearing properties. The use of descriptive analysis methodology was an effective means of quantifying watermelon sensory texture profiles for characterizing specific cultivars' characteristics. Of the 10 cultivars screened, 71% of the variation in the sensory attributes was measured using the 1st 2 principal components. Pairwise correlation of the hollow puncture probe and sensory parameters determined that initial slope, maximum force, and work after maximum force measurements all correlated well to the sensory attributes crisp and firm. These findings confirm that maximum force correlates well with not only firmness in watermelon, but crispness as well. The initial slope parameter also captures the sensory crispness of watermelon, but is not as practical to measure in the field as maximum force. The work after maximum force parameter is thought to reflect cellular arrangement and membrane integrity that in turn impact sensory firmness and crispness. Watermelon cultivar types were correctly predicted by puncture test measurements in heart tissue 87% of the time, although descriptive analysis was correct 54% of the time. © 2016 Institute of Food Technologists®

Effect of field cooling heights on the levitation force of pure and starch/polystyrene/MWCNT added bulk MgB2 superconductors

NASA Astrophysics Data System (ADS)

Tripathi, D.; Dey, T. K.

2014-12-01

A series of MgB2 pellets with and without addition of carbon from different sources (viz. starch, polystyrene and carbon nanotubes) have been synthesized by solid state reaction under argon atmosphere. XRD analysis indicates a decrease in lattice parameters of MgB2 with addition of starch, polystyrene (PS) and MWCNT and confirms substitution of carbon in boron sites. The presence of nanosized carbon inclusions between the grain boundaries in the present set of samples is evident in TEM photographs. Resistivity data confirms a decrease in superconducting transition temperature (Tc0) for MgB2 doped with starch/PS/MWCNT. The effect of different field cooling heights (HIFC) at 20 K on maximum levitation force (FMLF) and maximum attractive force (FMAF) of pure MgB2 and MgB2 doped with starch/PS/MWCNT have been investigated. Except for MWCNT, doping of starch and PS in MgB2 is found to improve FMLF and FMAF and the best result is obtained for MgB2 doped with 1 wt.% PS. Levitation force measured as a function of decreasing initial field cooling height indicates exponential dependence of both maximum levitation force (FMLF) and maximum attractive force (FMAF). However, the gap distance between PM and the sample (H0AF and HMAF) corresponding to maximum attractive force (FMAF) and zero attractive force (F0AF) varies linearly and their difference remains constant. This constancy in (HMAF - H0AF) is understood in terms of constant reduction rate of magnetic flux density between H0AF and HMAF.

Tethered swimming can be used to evaluate force contribution for short-distance swimming performance.

PubMed

Morouço, Pedro G; Marinho, Daniel A; Keskinen, Kari L; Badillo, Juan J; Marques, Mário C

2014-11-01

The purpose of this study was two-fold: (a) to compare stroke and the physiological responses between maximal tethered and free front crawl swimming and (b) to evaluate the contribution of force exertion for swimming performance over short distances. A total of 34 male swimmers, representing various levels of competitive performance, participated in this study. Each participant was tested in both a 30-second maximal tethered swimming test and a 50-m free swimming test. The tethered force parameters, the swimming speed, stroke (stroke rate [SR]), and the physiological responses (increase in blood lactate concentration [ΔBLa], heart rate, and rate of perceived exertion) were recorded and calculated. The results showed no differences in stroke and the physiological responses between tethered and free swimming, with a high level of agreement for the SR and ΔBLa. A strong correlation was obtained between the maximum impulse of force per stroke and the speed (r = 0.91; p < 0.001). Multiple regression analysis revealed that the maximum impulse and SR in the tethered condition explained 84% of the free swimming performance. The relationship between the swimming speed and maximum force tended to be nonlinear, whereas linear relationships were observed with the maximum impulse. This study demonstrates that tethered swimming does not significantly alter stroke and the physiological responses compared with free swimming, and that the maximum impulse per stroke should be used to evaluate the balance between force and the ability to effectively apply force during sprint swimming. Consequently, coaches can rely on tethered forces to identify strength deficits and improve swimming performance over short distances.

Force and Directional Force Modulation Effects on Accuracy and Variability in Low-Level Pinch Force Tracking.

PubMed

Park, Sangsoo; Spirduso, Waneen; Eakin, Tim; Abraham, Lawrence

2018-01-01

The authors investigated how varying the required low-level forces and the direction of force change affect accuracy and variability of force production in a cyclic isometric pinch force tracking task. Eighteen healthy right-handed adult volunteers performed the tracking task over 3 different force ranges. Root mean square error and coefficient of variation were higher at lower force levels and during minimum reversals compared with maximum reversals. Overall, the thumb showed greater root mean square error and coefficient of variation scores than did the index finger during maximum reversals, but not during minimum reversals. The observed impaired performance during minimum reversals might originate from history-dependent mechanisms of force production and highly coupled 2-digit performance.

An analytical fiber bundle model for pullout mechanics of root bundles

NASA Astrophysics Data System (ADS)

Cohen, D.; Schwarz, M.; Or, D.

2011-09-01

Roots in soil contribute to the mechanical stability of slopes. Estimation of root reinforcement is challenging because roots form complex biological networks whose geometrical and mechanical characteristics are difficult to characterize. Here we describe an analytical model that builds on simple root descriptors to estimate root reinforcement. Root bundles are modeled as bundles of heterogeneous fibers pulled along their long axes neglecting root-soil friction. Analytical expressions for the pullout force as a function of displacement are derived. The maximum pullout force and corresponding critical displacement are either derived analytically or computed numerically. Key model inputs are a root diameter distribution (uniform, Weibull, or lognormal) and three empirical power law relations describing tensile strength, elastic modulus, and length of roots as functions of root diameter. When a root bundle with root tips anchored in the soil matrix is pulled by a rigid plate, a unique parameter, ?, that depends only on the exponents of the power law relations, dictates the order in which roots of different diameters break. If ? < 1, small roots break first; if ? > 1, large roots break first. When ? = 1, all fibers break simultaneously, and the maximum tensile force is simply the roots' mean force times the number of roots in the bundle. Based on measurements of root geometry and mechanical properties, the value of ? is less than 1, usually ranging between 0 and 0.7. Thus, small roots always fail first. The model shows how geometrical and mechanical characteristics of roots and root diameter distribution affect the pullout force, its maximum and corresponding displacement. Comparing bundles of roots that have similar mean diameters, a bundle with a narrow variance in root diameter will result in a larger maximum force and a smaller displacement at maximum force than a bundle with a wide diameter distribution. Increasing the mean root diameter of a bundle without changing the distribution's shape increases both the maximum force and corresponding displacement. Estimates of the maximum pullout forces for bundles of 100 roots with identical diameter distribution for different species range from less than 1 kN for barley (Hordeum vulgare) to almost 16 kN for pistachio (Pistacia lentiscus). The model explains why a commonly used assumption that all roots break simultaneously overpredicts the maximum pullout force by a factor of about 1.6-2. This ratio may exceed 3 for diameter distributions that have a large number of small roots like the exponential distribution.

Gradient Drift Turbulence from Electron Bite-Outs: Dependence on Atmospheric Parameters.

NASA Astrophysics Data System (ADS)

Young, M.; Oppenheim, M. M.; Dimant, Y. S.

2017-12-01

Electron bite-outs are regions of decreased electron density without a corresponding decrease in ion density, often caused by electron attachment to dust grains. They typically occur in the upper D-/lower E-region ionosphere and the accompanying electron gradient provides free energy to drive the gradient drift instability (GDI). The major difference between classical GDI and electron bite-out driven GDI is that the instability occurs on the top side of the bite-out region in the latter, as opposed to the bottom side in the former, in the presence of a vertical background electric field. Moreover, the mobile plasma population contains a gradient in only one species while the entire system remains quasineutral. This modified geometry presents new pathways for instabilities as the ions build up near the bite-out layer, leaving behind depletions that ascend away from the layer. Previous simulation runs showed that the presence of an electron gradient drives GDI-like turbulence even when ions and electrons start in momentum balance. Furthermore, a simulation run that replaced the electron bite-out with a layer of enhanced ion density, as though ions and electrons had filled in the bite-out region, did not lead to instability. This work examines the role of atmospheric parameters at altitudes between 80-100 km in instability formation and turbulence development, including the role of collisions in impeding instability growth as altitude decreases. Key parameters include the ambient electric field, which plays a critical role in triggering the gradient-drift instability; collision frequencies and temperature, which vary with altitude and effect the turbulent growth rate; and relative charge density of the bite-out, which increases the electron gradient strength. This work provides insight into how electron bite-out layers can produce turbulence that ground-based high frequency (HF) radars may be able to observe. The upper D-/lower E-region ionosphere is generally difficult to study in situ, making simulations of ground-based observables much more important. Assuming that electron bite-out layers result from dust charging in particular will allow the community to use the predictions of this work to study the ionospheric dust population.

Water vapour and heat combine to elicit biting and biting persistence in tsetse

PubMed Central

2013-01-01

Background Tsetse flies are obligatory blood feeders, accessing capillaries by piercing the skin of their hosts with the haustellum to suck blood. However, this behaviour presents a considerable risk as landing flies are exposed to predators as well as the host’s own defense reactions such as tail flicking. Achieving a successful blood meal within the shortest time span is therefore at a premium in tsetse, so feeding until replete normally lasts less than a minute. Biting in blood sucking insects is a multi-sensory response involving a range of physical and chemical stimuli. Here we investigated the role of heat and humidity emitted from host skin on the biting responses of Glossina pallidipes, which to our knowledge has not been fully studied in tsetse before. Methods The onset and duration of the biting response of G. pallidipes was recorded by filming movements of its haustellum in response to rapid increases in temperature and/or relative humidity (RH) following exposure of the fly to two airflows. The electrophysiological responses of hygroreceptor cells in wall-pore sensilla on the palps of G. pallidipes to drops in RH were recorded using tungsten electrodes and the ultra-structure of these sensory cells was studied by scanning and transmission electron microscopy. Results Both latency and proportion of tsetse biting are closely correlated to RH when accompanied by an increase of 13.1°C above ambient temperature but not for an increase of just 0.2°C. Biting persistence, as measured by the number of bites and the time spent biting, also increases with increasing RH accompanied by a 13.1°C increase in air temperature. Neurones in wall-pore sensilla on the palps respond to shifts in RH. Conclusions Our results show that temperature acts synergistically with humidity to increase the rapidity and frequency of the biting response in tsetse above the levels induced by increasing temperature or humidity separately. Palp sensilla housing hygroreceptor cells, described here for the first time in tsetse, are involved in the perception of differences in RH. PMID:23958224

Long-lasting permethrin impregnated uniforms: A randomized-controlled trial for tick bite prevention.

PubMed

Vaughn, Meagan F; Funkhouser, Sheana Whelan; Lin, Feng-Chang; Fine, Jason; Juliano, Jonathan J; Apperson, Charles S; Meshnick, Steven R

2014-05-01

Because of frequent exposure to tick habitats, outdoor workers are at high risk for tick-borne diseases. Adherence to National Institute for Occupational Safety and Health-recommended tick bite prevention methods is poor. A factory-based method for permethrin impregnation of clothing that provides long-lasting insecticidal and repellent activity is commercially available, and studies are needed to assess the long-term effectiveness of this clothing under field conditions. To evaluate the protective effectiveness of long-lasting permethrin impregnated uniforms among a cohort of North Carolina outdoor workers. A double-blind RCT was conducted between March 2011 and September 2012. Subjects included outdoor workers from North Carolina State Divisions of Forestry, Parks and Recreation, and Wildlife who worked in eastern or central North Carolina. A total of 159 volunteer subjects were randomized, and 127 and 101 subjects completed the first and second years of follow-up, respectively. Uniforms of participants in the treatment group were factory-impregnated with long-lasting permethrin whereas control group uniforms received a sham treatment. Participants continued to engage in their usual tick bite prevention activities. Incidence of work-related tick bites reported on weekly tick bite logs. Study subjects reported 1,045 work-related tick bites over 5,251 person-weeks of follow-up. The mean number of reported tick bites in the year prior to enrollment was similar for both the treatment and control groups, but markedly different during the study period. In our analysis conducted in 2013, the effectiveness of long-lasting permethrin impregnated uniforms for the prevention of work-related tick bites was 0.82 (95% CI=0.66, 0.91) and 0.34 (95% CI=-0.67, 0.74) for the first and second years of follow-up. These results indicate that long-lasting permethrin impregnated uniforms are highly effective for at least 1 year in deterring tick bites in the context of typical tick bite prevention measures employed by outdoor workers. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

The "Smart Dining Table": Automatic Behavioral Tracking of a Meal with a Multi-Touch-Computer.

PubMed

Manton, Sean; Magerowski, Greta; Patriarca, Laura; Alonso-Alonso, Miguel

2016-01-01

Studying how humans eat in the context of a meal is important to understanding basic mechanisms of food intake regulation and can help develop new interventions for the promotion of healthy eating and prevention of obesity and eating disorders. While there are a number of methodologies available for behavioral evaluation of a meal, there is a need for new tools that can simplify data collection through automatic and online analysis. Also, there are currently no methods that leverage technology to add a dimension of interactivity to the meal table. In this study, we examined the feasibility of a new technology for automatic detection and classification of bites during a laboratory meal. We used a SUR40 multi-touch tabletop computer, powered by an infrared camera behind the screen. Tags were attached to three plates, allowing their positions to be tracked, and the saturation (a measure of the infrared intensity) in the surrounding region was measured. A Kinect camera was used to record the meals for manual verification and provide gesture detection for when the bites were taken. Bite detections triggered classification of the source plate by the SUR40 based on saturation flux in the preceding time window. Five healthy subjects (aged 20-40 years, one female) were tested, providing a total sample of 320 bites. Sensitivity, defined as the number of correctly detected bites out of the number of actual bites, was 67.5%. Classification accuracy, defined as the number of correctly classified bites out of those detected, was 82.4%. Due to the poor sensitivity, a second experiment was designed using a single plate and a Myo armband containing a nine-axis accelerometer as an alternative method for bite detection. The same subjects were tested (sample: 195 bites). Using a simple threshold on the pitch reading of the magnetometer, the Myo data achieved 86.1% sensitivity vs. 60.5% with the Kinect. Further, the precision of positive predictive value was 72.1% for the Myo vs. 42.8% for the Kinect. We conclude that the SUR40 + Myo combination is feasible for automatic detection and classification of bites with adequate accuracy for a range of applications.

Management of pediatric snake bites: are we doing too much?

PubMed

Correa, Jesus A; Fallon, Sara C; Cruz, Andrea T; Grawe, Glenda H; Vu, Phong V; Rubalcava, Daniel M; Kaziny, Brent; Naik-Mathuria, Bindi J; Brandt, Mary L

2014-06-01

The optimal management of children with snake bite injuries is not well defined. The purpose of this study was to review the use of antivenom, diagnostic tests, and antibiotics in children bitten by venomous snakes in a specific geographic region (Southeast Texas). This is a retrospective single-center review of all patients with snake bite injury from 1/2006 to 6/2012. An envenomated bite was defined as causing edema, discoloration of the skin, necrosis, or systemic effects. The severity of injury was scored using a novel 4-point scale based on initial physical examination alone. One hundred fifty-one children (mean age 8.4±4.3years) were treated for a snake bite. There were no mortalities. Lower extremity injuries were most common (60%). Most bites were from copperheads (43%). Envenomation was evident in 82% (average wound score: 2.61±0.81). The median hospital stay for admitted patients (79%) was 2days (range 1-7). Four patients required surgery for complications of the snake bite. Fifty-two children (34%) received CroFab, with one allergic reaction. 22/135 (16%) had evidence of coagulopathy. Seventy-two children (48%) received IV antibiotics. Despite a high rate of envenomated bites in Southeast Texas, significant morbidity is rare. Children with an envenomation score of 1 or 2 are unlikely to be coagulopathic, suggesting that laboratory investigation should be reserved for patients with higher scores. The indications for the administration of CroFab deserve further prospective study. Copyright © 2014 Elsevier Inc. All rights reserved.

Management of Tissue Loss After Agkistrodon Snakebite: Appropriate Use of Crotalidae-Fab Antivenin.

PubMed

Larson, Kenneth W; Schaefer, Keith R; Austin, Cindy; Norton, Rhy; Finley, Phillip J

2016-01-01

Although initially created for the treatment of rattlesnake (genus: Crotalus) bites, Crotalidae-Fab antivenin is used to treat many different pit viper envenomations. However, the efficacy of Crotalidae-Fab in preventing tissue loss from copperhead (Agkistrodon contortrix) or cottonmouth (Agkistrodon piscivorus) snakebites remains unclear. Recent reports show that Agkistrodon-related bites rarely require treatment beyond simple observation and pain control. The purpose of this study was to examine the amount of tissue loss in patients who received Crotalidae-Fab compared with those who did not after an Agkistrodon bite. After institutional review board approval, a retrospective study was completed at a Level 1 trauma center. Between 2009 and 2013, a total of 57 snakebites were identified. Of the 57 bites, the snake species was documented in 36 cases including 31 copperheads, 1 cottonmouth, and 4 rattlesnakes. The other 21 bites were from unknown or nonvenomous species. Of the 32 Agkistrodon-related bites, 15 patients received Crotalidae-Fab (average of 3 vials administered) and 17 did not receive Crotalidae-Fab. None of the 32 patients, regardless of treatment option, had tissue loss or required surgical interventions. Only 1 patient received Crotalidae-Fab and debridement of a vesicle associated with the bite. No clinically significant differences were observed between the groups. These findings support previous literature that failed to show added benefit of Crotalidae-Fab treatment for Agkistrodon bites beyond patient comfort and pain control. Evaluation of current protocols for Agkistrodon envenomations is warranted. Snakebite wound education in trauma physicians and nurses may decrease unnecessary use of antivenom medication.

Assessing the Accuracy of a Wrist Motion Tracking Method for Counting Bites across Demographic and Food Variables

PubMed Central

Shen, Yiru; Salley, James; Muth, Eric; Hoover, Adam

2017-01-01

This paper describes a study to test the accuracy of a method that tracks wrist motion during eating to detect and count bites. The purpose was to assess its accuracy across demographic (age, gender, ethnicity) and bite (utensil, container, hand used, food type) variables. Data were collected in a cafeteria under normal eating conditions. A total of 271 participants ate a single meal while wearing a watch-like device to track their wrist motion. Video was simultaneously recorded of each participant and subsequently reviewed to determine the ground truth times of bites. Bite times were operationally defined as the moment when food or beverage was placed into the mouth. Food and beverage choices were not scripted or restricted. Participants were seated in groups of 2–4 and were encouraged to eat naturally. A total of 24,088 bites of 374 different food and beverage items were consumed. Overall the method for automatically detecting bites had a sensitivity of 75% with a positive predictive value of 89%. A range of 62–86% sensitivity was found across demographic variables, with slower eating rates trending towards higher sensitivity. Variations in sensitivity due to food type showed a modest correlation with the total wrist motion during the bite, possibly due to an increase in head-towards-plate motion and decrease in hand-towards-mouth motion for some food types. Overall, the findings provide the largest evidence to date that the method produces a reliable automated measure of intake during unrestricted eating. PMID:28113994

Frameless stereotactic radiosurgery with a bite-plate: our experience with brain metastases.

PubMed

Furuse, M; Aoki, T; Takagi, T; Takahashi, J A; Ishikawa, M

2008-12-01

Non-invasive frameless stereotactic radiosurgical systems have recently been developed. We report our experience of frameless stereotactic radiosurgery (SRS) with a bite-plate for brain metastases. Between February 2002 and December 2005, 147 patients with brain metastases were treated with C-arm linear accelerator-based SRS and 122 patients were followed up by our institute. An optic tracking system with infrared light-emitting diodes was used for real-time monitoring. A bite-plate with fiducial markers was applied as a first-line method for frameless SRS. Head-ring fixation was used in patients lacking teeth. Lung carcinomas (63%) were the most common primary tumors, followed by breast carcinomas (13%). Ninety patients underwent radiosurgery with a bite-plate and 32 patients underwent fixation of a head ring. Males were significantly more predominant in the head-ring group (26 men and 6 women), compared with the bite-plate group (47 men and 43 women, p < 0.01). The average age (62 years) in the bite-plate group was significantly younger than that (68 years) in the head-ring group (p < 0.01). The median survival time was 12.0 months in the bite-plate group and 8.0 months in the head-ring group (p = 0.0621). Nine patients who had brain metastases in or close to the brain stem were treated with fractionated stereotactic radiotherapy. The frameless stereotactic radiosurgical system with a bite-plate is safe and effective for the treatment of brain metastasis. Elderly male patients sometimes are edentulous and require placement of a head ring for radiosurgery.

Insects and Bugs

ERIC Educational Resources Information Center

Sutherland, Karen

2009-01-01

They have been around for centuries. They sting, they bite. They cause intense itching or painful sores. They even cause allergic reactions and sometimes death. There are two types of insects that are pests to humans--those that sting and those that bite. The insects that bite do so with their mouths and include mosquitoes, chiggers, and ticks.…

Update on treated fabrics for control of biting fly species around livestock in sub-Saharan Africa

USDA-ARS?s Scientific Manuscript database

Treated fabrics can be used as an intervention on small livestock farms to prevent the entry of biting flies, thus reducing the incidence of disease transmission. The major objective is to prevent host-vector/biting fly contact. An efficacious barrier of treated fabric should significantly reduce or...

Probability of regenerating a normal limb after bite injury in the Mexican axolotl (Ambystoma mexicanum)

PubMed Central

Thompson, Sierra; Muzinic, Laura; Muzinic, Christopher; Niemiller, Matthew L.

2014-01-01

Abstract Multiple factors are thought to cause limb abnormalities in amphibian populations by altering processes of limb development and regeneration. We examined adult and juvenile axolotls (Ambystoma mexicanum) in the Ambystoma Genetic Stock Center (AGSC) for limb and digit abnormalities to investigate the probability of normal regeneration after bite injury. We observed that 80% of larval salamanders show evidence of bite injury at the time of transition from group housing to solitary housing. Among 717 adult axolotls that were surveyed, which included solitary‐housed males and group‐housed females, approximately half presented abnormalities, including examples of extra or missing digits and limbs, fused digits, and digits growing from atypical anatomical positions. Bite injury probably explains these limb defects, and not abnormal development, because limbs with normal anatomy regenerated after performing rostral amputations. We infer that only 43% of AGSC larvae will present four anatomically normal looking adult limbs after incurring a bite injury. Our results show regeneration of normal limb anatomy to be less than perfect after bite injury. PMID:25745564

Indirect genetic effects for growth rate in domestic pigs alter aggressive and manipulative biting behaviour.

PubMed

Camerlink, Irene; Ursinus, Winanda W; Bijma, Piter; Kemp, Bas; Bolhuis, J Elizabeth

2015-01-01

Indirect genetic effects (IGEs) are heritable effects of an individual on phenotypic values of others, and may result from social interactions. We determined the behavioural consequences of selection for IGEs for growth (IGEg) in pigs in a G × E treatment design. Pigs (n = 480) were selected for high versus low IGEg with a contrast of 14 g average daily gain and were housed in either barren or straw-enriched pens (n = 80). High IGEg pigs showed from 8 to 23 weeks age 40% less aggressive biting (P = 0.006), 27% less ear biting (P = 0.03), and 40% less biting on enrichment material (P = 0.005). High IGEg pigs had a lower tail damage score (high 2.0; low 2.2; P = 0.004), and consumed 30 % less jute sacks (P = 0.002). Selection on high IGEg reduced biting behaviours additive to the, generally much larger, effects of straw-bedding (P < 0.01), with no G × E interactions. These results show opportunities to reduce harmful biting behaviours in pigs.

Efficacy of topical permethrin as repellent against Aedes aegypti's bites.

PubMed

Miot, Hélio Amante; Ferreira, Daniela Pinho; Mendes, Fabiana Guandalini; Carrenho, Flávia Roberta Hernandes; de Oliveira Amui, Isabela; Carneiro, Carlos Augusto Sá; Madeira, Newton Goulart

2008-07-15

Mosquitoes are the most important vectors of infectious diseases and their bites are related to several adverse skin reactions. Permethrin impregnated clothes are an efficient strategy against arthropods' bites; however, its topical efficacy as a repellent has not been well established. We studied the response to permethrin lotion 5 percent and N,N-Diethyl-meta-toluamide (DEET) spray 50 percent applied to the unprotected forearms of 10 volunteers. Each arm was exposed to 20 female mosquitoes of Aedes aegypti. We performed 71 bilateral comparative measurements evaluating the timing for the first bites. The average times for the arm without the product, with permethrin 5 percent, and with DEET 50 percent were: 7.9 seconds, 336.2 seconds and 7512.1 seconds. The results showed a significant difference between repellency times between either product and unprotected controls. In addition, there was a significant difference in time to first bite between permethrin and DEET treated arms (p<0.01). Permethrin affords some repellent activity against Aedes aegypti bites in this experimental setting. However, permethrin's profile of repellency was significantly inferior to that of DEET.

Mosquito bite anaphylaxis: immunotherapy with whole body extracts.

PubMed

McCormack, D R; Salata, K F; Hershey, J N; Carpenter, G B; Engler, R J

1995-01-01

Adverse reactions to mosquito bites have been recognized for some time. These usually consist of large local swellings and redness, generalized urticaria, angioedema and less easily definable responses such as nausea, dizziness, headaches, and lethargy. We report two patients who experienced systemic anaphylaxis from mosquito bites. Both were skin tested and given immunotherapy using whole body mosquito extracts. Skin testing using whole body mosquito extracts was positive to Aedes aegypti at 1/1,000 weight/volume (wt/vol) in one patient and to Aedes aegypti at 1/100,000 wt/vol, and Culex pipiens at 1/10,000 wt/vol in the other. Skin testing of ten volunteers without a history of adverse reactions to mosquito bites was negative. Immunotherapy using these extracts resulted in resolution of adverse reactions to mosquito bites in one patient and a decrease in reactions in the other. Immunotherapy with whole body mosquito extracts is a viable treatment option that can play a role in patients with mosquito bite-induced anaphylaxis. It may also result in severe side effects and one must determine the benefit versus risks for each individual patient.

Entomologic Inoculation Rates of Anopheles arabiensis in Southwestern Ethiopia

PubMed Central

Massebo, Fekadu; Balkew, Meshesha; Gebre-Michael, Teshome; Lindtjørn, Bernt

2013-01-01

We collected anophelines every second week for one year from randomly selected houses in southwestern Ethiopia by using Centers for Disease Control (CDC) light traps, pyrethrum spray catches, and artificial pit shelter constructions to detect circumsporozoite proteins and estimate entomologic inoculation rates (EIRs). Of 3,678 Anopheles arabiensis tested for circumsporozoite proteins, 11 were positive for Plasmodium falciparum and three for P. vivax. The estimated annual P. falciparum EIR of An. arabiensis was 17.1 infectious bites per person per year (95% confidence interval = 7.03–34.6) based on CDC light traps and 0.1 infectious bites per person per year based on pyrethrum spray catches. The P. falciparum EIRs from CDC light traps varied from 0 infectious bites per person per year (in 60% of houses) to 73.2 infectious bites per person per year in the house nearest the breeding sites. Risk of exposure to infectious bites was higher in wet months than dry months, with a peak in April (9.6 infectious bites per person per month), the period of highest mosquito density. PMID:23878184

Entomologic inoculation rates of Anopheles arabiensis in southwestern Ethiopia.

PubMed

Massebo, Fekadu; Balkew, Meshesha; Gebre-Michael, Teshome; Lindtjørn, Bernt

2013-09-01

We collected anophelines every second week for one year from randomly selected houses in southwestern Ethiopia by using Centers for Disease Control (CDC) light traps, pyrethrum spray catches, and artificial pit shelter constructions to detect circumsporozoite proteins and estimate entomologic inoculation rates (EIRs). Of 3,678 Anopheles arabiensis tested for circumsporozoite proteins, 11 were positive for Plasmodium falciparum and three for P. vivax. The estimated annual P. falciparum EIR of An. arabiensis was 17.1 infectious bites per person per year (95% confidence interval = 7.03-34.6) based on CDC light traps and 0.1 infectious bites per person per year based on pyrethrum spray catches. The P. falciparum EIRs from CDC light traps varied from 0 infectious bites per person per year (in 60% of houses) to 73.2 infectious bites per person per year in the house nearest the breeding sites. Risk of exposure to infectious bites was higher in wet months than dry months, with a peak in April (9.6 infectious bites per person per month), the period of highest mosquito density.

Relationship between occlusal force and falls among community-dwelling elderly in Japan: a cross-sectional correlative study.

PubMed

Eto, Maki; Miyauchi, Shinji

2018-05-09

Falls may cause serious health conditions among older population. Fall-related physical factors are thought to be associated with occlusal conditions. However, few studies examined the relationship between occlusal force and falls. To identify the association between occlusal force and falls among community-dwelling elderly individuals in Japan, public health nurses conducted a cross-sectional descriptive study. We performed extensive physical assessments of five items: maximum occlusal force, handgrip strength, maximal knee extensor strength, one-leg standing time with eyes open and body sway. We also conducted a questionnaire survey concerning the participants' demographic characteristics, health status and fall experience during the past year. Mean scores and standard deviations were calculated for age and the total points of the index of activities of daily living. Associations were examined using Mann-Whitney tests and logistic regression. We examined 159 community-dwelling people aged ≥65 years, who were independent and active, including 38 participants (24.5%) with experience of falls in the past year. Maximum occlusal force had significant correlation with handgrip strength, maximal knee extensor strength, and one-leg standing time and body sway (P < .05, respectively). We found weak associations between participants with and without a history of falls in terms of the five physical measurements. Logistic regression analysis showed that fall experience was significantly associated with maximum occlusal force (P = 0.004). This is the first study, led by public health nursing researchers, to examine the associations between maximum occlusal force and falls among community-dwelling elderly in Japan. The results showed that maximum occlusal force was significantly related to the other four extensive physical assessments, and might also suggest that maximum occlusal force assessment by public health nurses could contribute to more sophisticated and precise prediction of fall risks among the community-dwelling elderly. The latest occlusal force measurement device is non-invasive and easy to use. Public health nurses can introduce it at periodical community health checkup assembly events, which might contribute to raising awareness among community-dwelling elderly individuals and public health nurses about fall prevention and prediction.

Duration-dependent effects of the bite-raised condition on hippocampal function in SAMP8 mice.

PubMed

Arakawa, Yoko; Ichihashi, Yukiko; Iinuma, Mitsuo; Tamura, Yasuo; Iwaku, Fumihiko; Kubo, Kin-Ya

2007-11-01

We evaluated the effect of the duration of occlusal disharmony induced chronic stress on hippocampal function by examining spatial memory in the Morris water maze and on the number of hippocampal neurons in aged senescence-accelerated prone (SAMP8) mice. The bite of SAMP8 mice was raised 0.1 mm using dental adhesive. Groups of mice were tested in the Morris water maze 8, 11, or 22 d after raising the bite. The results indicated that the longer the duration of the bite-raised condition, the greater the impairment in spatial learning ability and the greater the decrease in the number of neurons in the hippocampal CA3 subfield. Thus, behavioral and morphologic deficits induced by the bite-raised condition in aged SAMP8 mice are influenced by the duration of the occlusal disharmony.

Bites by the white-lipped pit viper (Trimeresurus albolabris) and other species in Hong Kong. A survey of 4 years' experience at the Prince of Wales Hospital.

PubMed

Cockram, C S; Chan, J C; Chow, K Y

1990-04-01

The case records of 242 snake bite victims admitted to the Prince of Wales Hospital in Hong Kong between September 1984 and October 1988 were studied retrospectively. When the snake was identified, the White-lipped pit viper (Trimeresurus albolabris) was by far the commonest species involved. In addition to local oedema and inflammation, evidence of a significant blood clotting disturbance was present in at least 10% of cases, defibrination and thrombocytopenia being the commonest findings. Since such abnormality was not always sought the true figure is likely to be higher. Three fatalities occurred, one of which was secondary to a probable White-lipped pit viper bite, one to a bite by Chinese cobra and one to a bite by Russell's viper.

Decline in hospitalisations due to dog bite injuries in Catalonia, 1997-2008. An effect of government regulation?

PubMed

Villalbí, Joan R; Cleries, Montse; Bouis, Susana; Peracho, Víctor; Duran, Julia; Casas, Conrad

2010-12-01

To analyse population-based data on hospitalisation caused by dog bite injuries after changes in legal regulations on dog ownership, including breed-specific regulations. Descriptive study. Hospitals in Catalonia (Spain), 1997-2008. Persons hospitalised with injuries caused by dog bites. There has been a significant decline in hospitalisation caused by injuries from dog bites from 1.80/100,000 in 1997-9 to 1.11/100,000 in 2006-8, after the enactment of stricter regulations on dog ownership in 1999 and 2002. The magnitude of this change is significant (-38%), and has been greatest in less urban settings. Government regulations were associated with a sizable decrease in injuries caused by dog bites in Catalonia. More evaluative studies in this field may provide criteria to focus future regulations and other preventive interventions.

Comparison of short-term effects between face mask and skeletal anchorage therapy with intermaxillary elastics in patients with maxillary retrognathia.

PubMed

Ağlarcı, Cahide; Esenlik, Elçin; Fındık, Yavuz

2016-06-01

The aim of this study was to compare the short-term dental and skeletal effects of a face mask (FM) with those of skeletal anchorage (SA) therapy with intermaxillary elastics in prepubertal patients with skeletal Class III malocclusion. Fifty patients with skeletal Class III malocclusion and maxillary deficiency were divided into two groups. In the FM group, an FM was applied by a bite plate with a force of 400g for each side. In the SA group, mini-plates were placed between mandibular lateral incisors and canines, and mini-implants were inserted between maxillary second premolars and first molars. A bite plate was inserted into the upper arch, and Class III elastics were applied with a force of 200g between each mini-plate and mini-implant. Mean treatment durations were 0.52±0.09 years for FM and 0.76±0.09 years for SA. After the treatment, statistically significant increases in SNA°, ANB°, A-y, 1-NA, SnGoGn°, Co-A, Co-Gn, and A-Nperp, and reductions in SNB° and FH┴N-Pg were observed in both groups, and these changes were similar in both groups. In the FM group, 1-NB decreased significantly, and in the SA group, it increased significantly (P < 0.05). The undesired dentoalveolar effects of the FM treatment were eliminated with SA treatment, except with regard to lower incisor inclination. Favourable skeletal outcomes can be achieved by SA therapies, which could be an alternative to the extraoral appliances frequently applied to treat skeletal Class III patients with maxillary deficiency. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Are Cranial Biomechanical Simulation Data Linked to Known Diets in Extant Taxa? A Method for Applying Diet-Biomechanics Linkage Models to Infer Feeding Capability of Extinct Species

PubMed Central

Tseng, Zhijie Jack; Flynn, John J.

2015-01-01

Performance of the masticatory system directly influences feeding and survival, so adaptive hypotheses often are proposed to explain craniodental evolution via functional morphology changes. However, the prevalence of “many-to-one” association of cranial forms and functions in vertebrates suggests a complex interplay of ecological and evolutionary histories, resulting in redundant morphology-diet linkages. Here we examine the link between cranial biomechanical properties for taxa with different dietary preferences in crown clade Carnivora, the most diverse clade of carnivorous mammals. We test whether hypercarnivores and generalists can be distinguished based on cranial mechanical simulation models, and how such diet-biomechanics linkages relate to morphology. Comparative finite element and geometric morphometrics analyses document that predicted bite force is positively allometric relative to skull strain energy; this is achieved in part by increased stiffness in larger skull models and shape changes that resist deformation and displacement. Size-standardized strain energy levels do not reflect feeding preferences; instead, caniform models have higher strain energy than feliform models. This caniform-feliform split is reinforced by a sensitivity analysis using published models for six additional taxa. Nevertheless, combined bite force-strain energy curves distinguish hypercarnivorous versus generalist feeders. These findings indicate that the link between cranial biomechanical properties and carnivoran feeding preference can be clearly defined and characterized, despite phylogenetic and allometric effects. Application of this diet-biomechanics linkage model to an analysis of an extinct stem carnivoramorphan and an outgroup creodont species provides biomechanical evidence for the evolution of taxa into distinct hypercarnivorous and generalist feeding styles prior to the appearance of crown carnivoran clades with similar feeding preferences. PMID:25923776

Identification of chromosomal locations associated with tail biting and being a victim of tail-biting behaviour in the domestic pig (Sus scrofa domesticus).

PubMed

Wilson, Kaitlin; Zanella, Ricardo; Ventura, Carlos; Johansen, Hanne Lind; Framstad, Tore; Janczak, Andrew; Zanella, Adroaldo J; Neibergs, Holly Louise

2012-11-01

The objective of this study was to identify loci associated with tail biting or being a victim of tail biting in Norwegian crossbred pigs using a genome-wide association study with PLINK case-control analysis. DNA was extracted from hair or blood samples collected from 98 trios of crossbred pigs located across Norway. Each trio came from the same pen and consisted of one pig observed to initiate tail biting, one pig which was the victim of tail biting and a control pig which was not involved in either behaviour. DNA was genotyped using the Illumina PorcineSNP60 BeadChip whole-genome single-nucleotide polymorphism (SNP) assay. After quality assurance filtering, 53,952 SNPs remained comprising 74 animals (37 pairs) for the tail biter versus control comparison and 53,419 SNPs remained comprising 80 animals (40 pairs) for the victim of tail biting versus control comparison. An association with being a tail biter was observed on Sus scrofa chromosome 16 (SSC16; p = 1.6 × 10(-5)) and an unassigned chromosome (p = 3.9 × 10(-5)). An association with being the victim of tail biting was observed on Sus scrofa chromosomes 1 (SSC1; p = 4.7 × 10(-5)), 9 (SSC9; p = 3.9 × 10(-5)), 18 (SSC18; p = 7 × 10(-5) for 9,602,511 bp, p = 3.4 × 10(-5) for 9,653,881 bp and p = 5.3 × 10(-5) for 29,577,783 bp) and an unassigned chromosome (p = 6.1 × 10(-5)). An r(2) = 0.96 and a D' = 1 between the two SNPs at 9 Mb on SSC18 indicated extremely high linkage disequilibrium, suggesting that these two markers represent a single locus. These results provide evidence of a moderate genetic association between the propensity to participate in tail-biting behaviour and the likelihood of becoming a victim of this behaviour.

Plasmodium sporozoite motility is modulated by the turnover of discrete adhesion sites.

PubMed

Münter, Sylvia; Sabass, Benedikt; Selhuber-Unkel, Christine; Kudryashev, Mikhail; Hegge, Stephan; Engel, Ulrike; Spatz, Joachim P; Matuschewski, Kai; Schwarz, Ulrich S; Frischknecht, Friedrich

2009-12-17

Sporozoites are the highly motile stages of the malaria parasite injected into the host's skin during a mosquito bite. In order to navigate inside of the host, sporozoites rely on actin-dependent gliding motility. Although the major components of the gliding machinery are known, the spatiotemporal dynamics of the proteins and the underlying mechanism powering forward locomotion remain unclear. Here, we show that sporozoite motility is characterized by a continuous sequence of stick-and-slip phases. Reflection interference contrast and traction force microscopy identified the repeated turnover of discrete adhesion sites as the underlying mechanism of this substrate-dependent type of motility. Transient forces correlated with the formation and rupture of distinct substrate contact sites and were dependent on actin dynamics. Further, we show that the essential sporozoite surface protein TRAP is critical for the regulated formation and rupture of adhesion sites but is dispensable for retrograde capping.

Differing perspectives on what to do with a stuttering preschooler and why.

PubMed

Onslow, Mark; Yaruss, J Scott

2007-02-01

In order to produce a compact and readable overview of clinical issues for clinicians, the authors developed a "1,000-bites" format in which they discuss a topic initiated by one of the authors. The format is designed to give the reader the feeling of contemporaneous observation of a conversation between 2 authors. To that end, the format guidelines are as follows: (a) alternating responses from the authors with no response greater than 100 words; (b) a maximum of 1,000 words per author; (c) when one author has used 1,000 words, the other can complete 1,000 words in a final response or opt to not issue a final response; (d) debate may be controversial and vigorous but must be collegial; and (e) a noncontemporaneous edit by an author to a response requires the agreement of the other author. The "1,000-bites" format achieved a collegial exchange between 2 discussants with differing opinions by creating a single work of shared authorship by them. Arguably, this format is more informative to clinicians than independent essays and rebuttals in a sequence of letters to the editor. One of its advantages is that it provides insights into the issue at stake by means of short and contemporaneous segments of spontaneous interaction.

[Evaluation of the use of repellent against mosquito bite by military personnel in the Amazon Basin].

PubMed

Ribas, Jonas; Carreño, Ana Maria

2010-01-01

In Brazil, diseases caused by insect bites are frequent. Therefore, it is extremely important that prophylatic measures are adequately carried out, especially in endemic areas such as the Amazon which receives a great number of visitors, for both business and tourism purposes.. To evaluate the use of insect repellents available in the market by military personnel who often go in missions in the middle of the jungle, in the Amazon region. Fifty - one militaries in the Amazon region were selected and they answered a questionnaire in June/2008. 63,7% of the militaries used products that contained Deet in the maximum concentration of only 15% that has minimum repellent action; 36% reported to combine these products with sun protective products which increased the risk of intoxication; 36,4% used a natural repellent during their missions; two of the militaries participants used vitamin B and considered their repellent action ineffective. The repellents that contain Deet and which were used by the group present concentrations that are lower than the concentrations considered safe for using in the jungle. It was frequent the combination of Deet with sun protective products ,which is a potentially toxic association. Natural repellents that have "andiroba" and" copaíba" as components presented a higher perception of protection from the participants.

Insect Allergy.

PubMed

Lee, Hobart; Halverson, Sara; Mackey, Regina

2016-09-01

Insect bites and stings are common. Risk factors are mostly associated with environmental exposure. Most insect bites and stings result in mild, local, allergic reactions. Large local reactions and systemic reactions like anaphylaxis are possible. Common insects that bite or sting include mosquitoes, ticks, flies, fleas, biting midges, bees, and wasps. The diagnosis is made clinically. Identification of the insect should occur when possible. Management is usually supportive. For anaphylaxis, patients should be given epinephrine and transported to the emergency department for further evaluation. Venom immunotherapy (VIT) has several different protocols. VIT is highly effective in reducing systemic reactions and anaphylaxis. Copyright © 2016 Elsevier Inc. All rights reserved.

Simple and Efficient Technique for Correction of Unilateral Scissor Bite Using Straight Wire

PubMed Central

Dolas, Siddhesh Gajanan; Chitko, Shrikant Shrinivas; Kerudi, Veerendra Virupaxappa; Bonde, Prasad Vasudeo

2016-01-01

Unilateral scissor bite is a relatively rare malocclusion. However, its correction is often difficult and a challenge for the clinician. This article presents simple and efficient technique for the correction of severe unilateral scissor bite in a 14 year old boy, using 0.020 S.S. A. J. Wilcock wire (premium plus) out of the spool, with minimal adjustments and placed in mandibular arch. After about six weeks time, good amount of correction was seen in the lower arch and the lower molar had been relieved of scissor bite. PMID:27231682

Microbiology of animal bite wound infections.

PubMed

Abrahamian, Fredrick M; Goldstein, Ellie J C

2011-04-01

The microbiology of animal bite wound infections in humans is often polymicrobial, with a broad mixture of aerobic and anaerobic microorganisms. Bacteria recovered from infected bite wounds are most often reflective of the oral flora of the biting animal, which can also be influenced by the microbiome of their ingested prey and other foods. Bacteria may also originate from the victim's own skin or the physical environment at the time of injury. Our review has focused on bite wound infections in humans from dogs, cats, and a variety of other animals such as monkeys, bears, pigs, ferrets, horses, sheep, Tasmanian devils, snakes, Komodo dragons, monitor lizards, iguanas, alligators/crocodiles, rats, guinea pigs, hamsters, prairie dogs, swans, and sharks. The medical literature in this area has been made up mostly of small case series or case reports. Very few studies have been systematic and are often limited to dog or cat bite injuries. Limitations of studies include a lack of established or inconsistent criteria for an infected wound and a failure to utilize optimal techniques in pathogen isolation, especially for anaerobic organisms. There is also a lack of an understanding of the pathogenic significance of all cultured organisms. Gathering information and conducting research in a more systematic and methodical fashion through an organized research network, including zoos, veterinary practices, and rural clinics and hospitals, are needed to better define the microbiology of animal bite wound infections in humans.

[Facial dog bite injuries in children: retrospective study of 77 cases].

PubMed

Hersant, B; Cassier, S; Constantinescu, G; Gavelle, P; Vazquez, M-P; Picard, A; Kadlub, N

2012-06-01

The face is the area most vulnerable for dog bites in children. Surgical management is an emergency to prevent infection, functional and aesthetic outcomes. The aim of this study was to define a new gravity scale, and to determine a prevention policy. In our maxillofacial and plastic surgery department, we conducted a retrospective study from 2002 to 2010, including 77 children under 16 years old, victims of facial dog bite. We analyzed epidemiological, clinical data, surgical outcomes. The mean age was 5.36 years. Dogs were principally represented by class I and II dogs; 27,7% of them had ever bitten before. In almost all the cases, the dogs belong to the family or closers. Twenty-one percent of children belong to an unfavourable social environment; 71.43% of dog bites interested the central area of the face. The bites were deep in 77% of cases with amputation or extensive loss of substance in 31% of cases. The healing time was 10.54 months. Nearly a third of patients required several surgeries; 41.56% of patients had aesthetic and functional sequelae; 35.1% of children had psychological problems afterward. Facial children dog bites require a multidisciplinary approach, and a long-term follow-up. We propose a new classification of dog bite severity, more appropriate to the face. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

Some relations between classically conditioned aggression and conditioned suppression in squirrel monkeys.

PubMed Central

Hake, D F; Campbell, R L

1980-01-01

During three experiments with squirrel monkeys, stimulus and shock pairings were given in the presence of a bite tube. Experiments 1 and 2 used a conditioned-suppression procedure in which bar pressing was reinforced with food. A transparent shield prevented biting of the bar. When the stimulus was paired with shock, bar pressing decreased (conditioned suppression) and tube biting increased during the stimulus (classically conditioned aggression). When the bite tube was removed on alternate sessions in Experiment 2, there was more suppression when the tube was present, thus suggesting that biting competed with bar pressing. However, this simple competing-response interpretation was complicated by the findings of Experiment 3 where, with naive monkeys, bar pressing was never reinforced with food, yet bar pressing was induced during the stimulus and was highest when the bite tube was absent. The fact that stimulus-induced bar pressing developed inciated that bar pressing in conditioned-suppression procedures, suppressed or not, may be maintained by two types of control--the food reinforcer and induced CS control. The higher rate of induced bar pressing during the stimulus with the bite tube absent confounds a simple competing response interpretation of conditioned suppression. It suggests that shock-induced responses during conditioned suppression could be both contributing to and competing with responding maintained by food, with the net effect depending on specific but ill-defined features of the situation. PMID:7190996

Gingival abscess due to an unusual nail-biting habit: a case report.

PubMed

Sousa, Denise; Pinto, Daniela; Araujo, Rebecca; Rego, Rodrigo Otavio; Moreira-Neto, Jose

2010-03-01

Nail-biting is one of the most frequent deleterious oral habits in children. It can result in systemic diseases or oral traumatic lesion. This report describes a case of gingival abscess in a child due to a fingernail-biting habit. A 5-year, 6-month-old female presented gingival swelling and fistula in the primary maxillary left central and right lateral incisors as an unusual sequelae to the periodontal tissues from fingernail-biting. A periodontal curette was used to remove the fragments and to curette the area. After the curettage, an exudate of blood and pus was drained. Then the area was irrigated with 0.12% chlorhexidine solution; applying finger pressure controlled the secretion. After one week, the patient returned with gingival swelling present in the same teeth. The same curettage procedure was performed. It was suggested that the deleterious habit was related to emotional tension and anxiety behaviors and the patient was referred for psychological treatment. When the patient returned one month later, she was still biting her fingernails, but she had stopped placing fragments into the gingival crevice. No more gingival inflammation or swelling was observed. his paper presents an unusual case report of a gingival abscess due to a fingernail-biting habit in a child, probably related to an emotional condition. The fingernail-biting habit can induce a periodontal traumatic injury yielding a more serious complication such as a gingival abscess.

Microbiology of Animal Bite Wound Infections

PubMed Central

Abrahamian, Fredrick M.; Goldstein, Ellie J. C.

2011-01-01

Summary: The microbiology of animal bite wound infections in humans is often polymicrobial, with a broad mixture of aerobic and anaerobic microorganisms. Bacteria recovered from infected bite wounds are most often reflective of the oral flora of the biting animal, which can also be influenced by the microbiome of their ingested prey and other foods. Bacteria may also originate from the victim's own skin or the physical environment at the time of injury. Our review has focused on bite wound infections in humans from dogs, cats, and a variety of other animals such as monkeys, bears, pigs, ferrets, horses, sheep, Tasmanian devils, snakes, Komodo dragons, monitor lizards, iguanas, alligators/crocodiles, rats, guinea pigs, hamsters, prairie dogs, swans, and sharks. The medical literature in this area has been made up mostly of small case series or case reports. Very few studies have been systematic and are often limited to dog or cat bite injuries. Limitations of studies include a lack of established or inconsistent criteria for an infected wound and a failure to utilize optimal techniques in pathogen isolation, especially for anaerobic organisms. There is also a lack of an understanding of the pathogenic significance of all cultured organisms. Gathering information and conducting research in a more systematic and methodical fashion through an organized research network, including zoos, veterinary practices, and rural clinics and hospitals, are needed to better define the microbiology of animal bite wound infections in humans. PMID:21482724

Predicting the Start of the Aedes albopictus (Diptera: Culicidae) Female Adult Biting Season Using the Spring Temperature in Japan

PubMed Central

Higa, Yukiko; Muto, Atsushi; Hirabayashi, Kimio; Yoshida, Masahiro; Sato, Takashi; Nihei, Naoko; Sawabe, Kyoko; Kobayashi, Mutsuo

2017-01-01

Abstract Aedes albopictus (Skuse) (Diptera: Culicidae) is distributed widely and is common in much of Japan. In Japan, female adults begin to bite in between April and June, except in the southern subtropics where the mosquito has no dormant period. It is difficult to estimate the first Ae. albopictus biting day because it varies annually depending on the location. Over several years, we surveyed the mosquitoes at different locations that covered a range of warmer to cooler areas of Japan. We found an association between the timing of first biting day by Ae. albopictus and spring temperature. In spring months, the strongest correlation was found with mean April temperatures, followed by March. Based on these data, it may, therefore, be possible to apply a simple formula to predict the timing of the first biting day at various geographical locations in Japan. Forecasting maps were created using a simple prediction formula. We found that the first biting day for Ae. albopictus changed depending on early spring temperatures for each year. There was an approximate 20-d difference in first biting day between years with warmer and cooler springs. This prediction model will provide useful insight for planning and practice of Ae. albopictus control programs, targeting larvae and adults, in temperate regions globally. PMID:28968909

USDA-ARS Knipling-Bushland U.S. Livestock Insects Research Laboratory Tick & Biting Fly Research Unit scientific update

USDA-ARS?s Scientific Manuscript database

Ticks and biting flies cause tremendous economic damage to the U.S. livestock industry while also being a health concern to humans. Research on their biology and control is done at the Knipling-Bushland U.S. Livestock Insects Research Laboratory, Tick and Biting Fly Research Unit with scientists loc...

Bedbugs: An Equal Opportunist and Cosmopolitan Creature

ERIC Educational Resources Information Center

Krause-Parello, Cheryl A.; Sciscione, Patricia

2009-01-01

Currently there is a rise in bedbugs seen in schools. The wingless, blood-sucking insects can arrive at school via student book bags, student clothing, or other personal items. If a student presents in the health office with a bite mark, the school nurse will need to differentiate between a bedbug bite and other insect bites, such as fleas,…

Identification of the mosquito biting deterrent constituents from the Indian folk remedy plant Jatropha curcas

USDA-ARS?s Scientific Manuscript database

An investigation of the Indian folk remedy plant, Jatropha curcas, was performed to specifically identify the constituents responsible for the mosquito biting deterrent activity of the oil as a whole. Jatropha curcas seed oil is burned in oil lamps in India and part of Africa to repel biting insect...

Reduction of mosquito biting-pressure: spatial repellents or mosquito traps? A field comparison of seven commercially available products in Israel

USDA-ARS?s Scientific Manuscript database

The personal protection capability of seven commercially available mosquito control devices (MCD) is compared under field conditions in Israel. Trials were performed in a high biting-pressure area inhabited by large populations of mosquito and biting midge species and using human volunteers for lan...

Relax and Try This Instead: Abbreviated Habit Reversal for Maladaptive Self-Biting.

ERIC Educational Resources Information Center

Jones, Kevin M.; Swearer, Susan M.; Friman, Patrick C.

1997-01-01

A study evaluated the effectiveness of an abbreviated habit reversal procedure to reduce maladaptive oral self-biting in an adolescent boy in residential care. Treatment involved a combination of relaxation and two competing responses (gum chewing and tongue-lip rubbing). The intervention eliminated the biting and the tissue damage it caused.…

Human cytokine response to Texas crotaline envenomation before and after antivenom administration.

PubMed

Crocker, Patrick; Zad, Omid; Milling, Truman; Maxson, Todd; King, Benjamin; Whorton, Elbert

2010-10-01

The aim of this study was to characterize the human cytokine response to Texas crotaline envenomation before and after antivenom administration. This study enrolled crotaline bite victims presenting to a regional trauma center and children's hospital from March to November 2007 and age-matched unbitten controls. Blood spot cards were obtained from bite victims at presentation and at 1 and 6 hours after antivenom administration. One control sample was drawn from each of the age-matched controls selected from urgent care patients presenting for minor complaints. Samples were delivered to a laboratory using a proprietary method for quantitative evaluation of a large number of biomarkers in parallel with bead-based multiplex immunoassays. After obtaining informed consent, 14 crotaline bite victims (age range, 5-85 years; median age, 45 years; 50% female) (Snakebite Severity Score, 2-7; median, 3) and 14 age-matched controls were enrolled. There were 7 copperhead (Agkistrodon contortrix) bites, 4 rattlesnake (probably Western Diamondback Crotalus atrox) bites, 2 cottonmouth (Agkistrodon piscivorus) bites, and 1 bite from a snake that was not identified by the victim. In t tests, the means in the presentation samples for apolipoprotein A-I (Apo A-I), Apo C3, interleukin 4 (IL-4), myeloperoxidase, plasminogen activator inhibitor 1 (PAI-1), epidermal growth factor, and regulated upon activation, normal t-cell expressed and secreted were significantly lower and Apo H was significantly higher in the bite patients than in the controls. In the 1-hour sample, α(1)-antitrypsin, Apo A-I, Apo C3, eotaxin, IL-4, myeloperoxidase, and PAI-1 levels were lower and prostatic acid phosphatase and cancer antigen 125 levels were higher in the bite patients than in the controls. And in the 6-hour sample, α(1)-antitrypsin, Apo A-I, Apo C3, endothelin-1, IL-4, macrophage inflammatory protein 1β, myeloperoxidase, and epidermal growth factor levels were lower and Apo H level was higher in the bite patients than in controls (all P values < .05). Crotaline venom produces a broad cytokine response in human bite victims. In particular, IL-4, myeloperoxidase, and Apo A-I and C3 levels remain altered despite antivenom therapy, whereas PAI-1 and regulated upon activation, normal t-cell expressed and secreted levels seem to normalize after antivenin as other markers are affected. Understanding this profile and further study of the markers identified might lead to improved therapies and better prognostic indicators. Copyright © 2010 Elsevier Inc. All rights reserved.

Snakebite Survivors Club: retrospective review of rattlesnake bites in Central California.

PubMed

Spano, Susanne; Macias, Fernando; Snowden, Brandy; Vohra, Rais

2013-07-01

We investigated clinical patterns of crotaline envenomation presenting to a tertiary-care academic hospital in Central California over a 10-year period. An IRB-approved, retrospective chart review was conducted on all patients diagnosed with snakebite from December 2000 to December 2010. Data abstracted: demographics, anatomic location of bite, comorbid conditions and intoxicants, length of stay, antivenom dose, laboratory results, and complications or procedures. There were 46 snakebite cases admitted over the study period. Five were "dry bites"; the remaining cases (41/46) received antivenom. There was a male predominance (83% male victims). Upper extremity bites were more common (32/41 upper vs 10/42 lower extremity). One victim sustained bilateral bites to the hands. Thirty-five patients (85%) were admitted, with an average length of stay 2.12 days. The longest hospitalization was 15 days. There were no fatalities. The average time from bite to ED presentation was 2 h 44 min. Bites occurred during every month except November, with the majority occurring during spring and summer months and peaking in June (12/42 cases). Most bites occurred in the hours between noon and 8 pm. The amount of antivenom given ranged from 2 to 35 vials (average, 9 vials). Interfacility transfers were common in our study population: thirteen (32%) patients were transferred into our emergency department for a higher level of care, and 3 (7%) were transferred out (two because of insurance requirements, and one for higher level of Pediatric ICU care). There were no surgical interventions in our study group. Intoxication did not appear to play a major role in this population as only 3 patients (7%) were found to be acutely intoxicated: one with cannabis and amphetamines, 1 with alcohol, and 1 with opioids. In Central California, crotaline envenomations occurred mainly in adult males. Dry bites, or bites not requiring antivenom administration, were uncommon, comprising only 10% of bites in this study population. Contrary to popular and clinical beliefs, substance abuse and/or alcohol intoxication did not appear to play a role in the majority of patients in this study. Care providers and snakebite specialists should be aware that snakebite patients are often transferred between facilities, a finding that may be useful in designing future first aid protocols and research. We hope these findings add concrete data and help correct some common misconceptions about snakebites in Central California. Copyright © 2012 Elsevier Ltd. All rights reserved.

Quantifying the effects of temperature on mosquito and parasite traits that determine the transmission potential of human malaria.

PubMed

Shapiro, Lillian L M; Whitehead, Shelley A; Thomas, Matthew B

2017-10-01

Malaria transmission is known to be strongly impacted by temperature. The current understanding of how temperature affects mosquito and parasite life history traits derives from a limited number of empirical studies. These studies, some dating back to the early part of last century, are often poorly controlled, have limited replication, explore a narrow range of temperatures, and use a mixture of parasite and mosquito species. Here, we use a single pairing of the Asian mosquito vector, An. stephensi and the human malaria parasite, P. falciparum to conduct a comprehensive evaluation of the thermal performance curves of a range of mosquito and parasite traits relevant to transmission. We show that biting rate, adult mortality rate, parasite development rate, and vector competence are temperature sensitive. Importantly, we find qualitative and quantitative differences to the assumed temperature-dependent relationships. To explore the overall implications of temperature for transmission, we first use a standard model of relative vectorial capacity. This approach suggests a temperature optimum for transmission of 29°C, with minimum and maximum temperatures of 12°C and 38°C, respectively. However, the robustness of the vectorial capacity approach is challenged by the fact that the empirical data violate several of the model's simplifying assumptions. Accordingly, we present an alternative model of relative force of infection that better captures the observed biology of the vector-parasite interaction. This model suggests a temperature optimum for transmission of 26°C, with a minimum and maximum of 17°C and 35°C, respectively. The differences between the models lead to potentially divergent predictions for the potential impacts of current and future climate change on malaria transmission. The study provides a framework for more detailed, system-specific studies that are essential to develop an improved understanding on the effects of temperature on malaria transmission.

Effect of intentional abutment disconnection on the micro-movements of the implant-abutment assembly: a 3D digital image correlation analysis.

PubMed

Messias, Ana; Rocha, Salomão; Calha, Nuno; Neto, Maria Augusta; Nicolau, Pedro; Guerra, Fernando

2017-01-01

Implant-abutment assembly stability is critical for the success of implant-supported rehabilitation. The intentional removal of the prosthetic components may hamper the achievement of the essential stability due to preload reduction in the screw joint and implant-screw mating surface changes. To evaluate the effect of intentional abutment disconnection and reconnection in the stability of internal locking hex implants and corresponding abutments using the method of 3D digital image correlation. Ten conical shape and internal hexagon connection implants were embedded in acrylic resin and assembled to prosthetic abutments with 30 Ncm torque and assigned to two groups: group 1 - tested for static load-bearing capacity at 30° off-axis for two times and group 2 - underwent intentional disconnection and reconnection between tests. Micro-movements were captured with two high-speed photographic cameras and analyzed with video correlation system in three spacial axes U, V and W. Screw abutment and internal implant thread morphology was observed with a field-emission scanning electron microscopy. After the intentional disconnection of the abutment, group 2 showed generally higher maximum displacements for U and V directions. Under 50N load, mean difference was 24.7 μm (P = 0.008) for U direction and -7.7 μm (P = 0.008) for V direction. No significant differences were found for maximum and minimum displacements in the W direction. Mean displacement of the speckle surface presented was statistically different in the two groups (P = 0.016). SEM revealed non-homogenous screw surfaces with scoring on group 2 plus striations and debris in the implant threads. Micro-movements were higher for the group submitted to intentional disconnection and reconnection of the abutment, particularly under average bite forces. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effects of bite size and duration of oral processing on retro-nasal aroma release - features contributing to meal termination.

PubMed

Ruijschop, Rianne M A J; Zijlstra, Nicolien; Boelrijk, Alexandra E M; Dijkstra, Annereinou; Burgering, Maurits J M; Graaf, Cees de; Westerterp-Plantenga, Margriet S

2011-01-01

The brain response to a retro-nasally sensed food odour signals the perception of food and it is suggested to be related to satiation. It is hypothesised that consuming food either in multiple small bite sizes or with a longer durations of oral processing may evoke substantial oral processing per gram consumed and an increase in transit time in the oral cavity. This is expected to result in a higher cumulative retro-nasal aroma stimulation, which in turn may lead to increased feelings of satiation and decreased food intake. Using real-time atmospheric pressure chemical ionisation-MS, in vivo retro-nasal aroma release was assessed for twenty-one young, healthy and normal-weight subjects consuming dark chocolate-flavoured custard. Subjects were exposed to both free or fixed bite size (5 and 15 g) and durations of oral processing before swallowing (3 and 9 s) in a cross-over design. For a fixed amount of dark chocolate-flavoured custard, consumption in multiple small bite sizes resulted in a significantly higher cumulative extent of retro-nasal aroma release per gram consumed compared with a smaller amount of large bite sizes. In addition, a longer duration of oral processing tended to result in a higher cumulative extent of retro-nasal aroma release per gram consumed compared with a short duration of oral processing. An interaction effect of bite size and duration of oral processing was not observed. In conclusion, decreasing bite size or increasing duration of oral processing led to a higher cumulative retro-nasal aroma stimulation per gram consumed. Hence, adapting bite size or duration of oral processing indicates that meal termination can be accelerated by increasing the extent of retro-nasal aroma release and, subsequently, the satiation.

Morbidity of pediatric dog bites: a case series at a level one pediatric trauma center.

PubMed

Garvey, Erin M; Twitchell, Denice K; Ragar, Rebecca; Egan, John C; Jamshidi, Ramin

2015-02-01

Pediatric dog bite injuries are common and vary in severity. We sought to characterize predisposing factors, required interventions, and morbidity. A prospective clinical database at a level one pediatric trauma center was reviewed for dog bite injuries over 74 consecutive months ending December 2013. This included all patients brought in by ambulance and/or seen by the trauma team. Of 650 dog bite incidents, 282 met the criteria for inclusion in the trauma database. Median age was 5 years (range, 2 months to 17 years) and 55% (154/282) of patients were male. Pit bulls were most frequently responsible, accounting for 39% (83/213) of incidents in which dog breed was documented. Fifty-three percent (150/282) of dogs belonged to the patient's immediate or extended family. Sixty-nine percent (194/282) of patients required operative intervention: 76% laceration repairs, 14% tissue transfers, and 2% neurosurgical interventions. The most severe injuries were depressed skull fractures, intracranial hemorrhage, laryngotracheal transection, and bilateral orchiectomy. Median length of stay was 1 day (range, 0 to 25 days). There were no mortalities. Pediatric dog bites span a wide range of ages, frequently require operative intervention, and can cause severe morbidity. Dog familiarity did not confer safety, and in this series, Pit bulls were most frequently responsible. These findings have great relevance for child safety. Pediatric dog bites are common and can vary in severity from superficial wounds to life-threatening injuries. Dog familiarity may confer a false sense of safety. A national dog bite prevention and education campaign should be developed with the goal of decreasing the incidence of pediatric dog bites. Copyright © 2015 Elsevier Inc. All rights reserved.

Mosquito biting activity on humans & detection of Plasmodium falciparum infection in Anopheles stephensi in Goa, India.

PubMed

Korgaonkar, Nandini S; Kumar, Ashwani; Yadav, Rajpal S; Kabadi, Dipak; Dash, Aditya P

2012-01-01

Knowledge of the bionomics of mosquitoes, especially of disease vectors, is essential to plan appropriate vector avoidance and control strategies. Information on biting activity of vectors during the night hours in different seasons is important for choosing personal protection measures. This study was carried out to find out the composition of mosquito fauna biting on humans and seasonal biting trends in Goa, India. Biting activities of all mosquitoes including vectors were studied from 1800 to 0600 h during 85 nights using human volunteers in 14 different localities of three distinct ecotypes in Goa. Seasonal biting trends of vector species were analysed and compared. Seasonal biting periodicity during different phases of night was also studied using William's mean. A total of 4,191 mosquitoes of five genera and 23 species were collected. Ten species belonged to Anopheles, eight to Culex, three to Aedes and one each to Mansonia and Armigeres. Eleven vector species had human hosts, including malaria vectors Anopheles stephensi (1.3%), An. fluviatilis (1.8%), and An. culicifacies (0.76%); filariasis vectors Culex quinquefasciatus (40.8%) and Mansonia uniformis (1.8%); Japanese encephalitis vectors Cx. tritaeniorhynchus (17.4%), Cx. vishnui (7.7%), Cx. pseudovishnui (0.1%), and Cx. gelidus (2.4%); and dengue and chikungunya vectors Aedes albopictus (0.9%) and Ae. aegypti (0.6%). Two An. stephensi of the total 831 female anophelines, were found positive for P. falciparum sporozoites. The entomological inoculation rate (EIR) of P. falciparum was 18.1 and 2.35 for Panaji city and Goa, respectively. Most of the mosquito vector species were collected in all seasons and throughout the scotophase. Biting rates of different vector species differed during different phases of night and seasons. Personal protection methods could be used to stop vector-host contact.

Rat-bites of an epidemic proportion in Peshawar vale; a GIS based approach in risk assessment.

PubMed

Fatima, Syeda Hira; Zaidi, Farrah; Adnan, Muhammad; Ali, Asad; Jamal, Qaiser; Khisroon, Muhammad

2018-03-19

Contemporary studies demonstrate that rodent bites do not occur frequently. However, a huge number of cases were reported from Peshawar vale, Pakistan during 2016. Two species, the local black rat Rattus rattus (Linnaeus, 1758) and the invasive brown rat Rattus norvegicus (Berkenhout, 1769) might be the suspected cause. Several studies indicated the invasion of brown rats into Pakistan presumably via port city of Karachi. In this study, we modeled geospatial distribution of rodent bites for risk assessment in the region. Bite cases reported to tertiary care lady reading hospital were monitored from January 1 to August 31, 2016. Among 1747 cases, statistically informative data (n = 1295) was used for analyses. MaxEnt algorithm was employed for geospatial modeling, taking into account various environmental variables (temperature, precipitation, humidity, and elevation) and anthropogenic factors (human population density, distance from roads, distance from water channels, and land use/land cover). MaxEnt results revealed that urban slums (84.5%) are at highest risk followed by croplands (10.9%) and shrublands (2.7%). Anthropogenic factors affecting incidence of rodent bites included host density (contribution: 34.7), distance from water channels (3.2), land use/land cover (2.8), and distance from roads (2). Most of the cases occurred within a radius of 0.3 km from roads and 5 km from water channels. Rodent bite incidence is currently at its peak in Peshawar vale. Factors significantly affecting rodents' bite activity and their distribution and dispersal include urbanization, distance from roads, and water channels. Further studies are needed to determine the impact of invasion by brown rat on bite incidence.

Escape rates and biting histories of dogs confined to their owner's property through the use of various containment methods.

PubMed

Starinsky, Nicole S; Lord, Linda K; Herron, Meghan E

2017-02-01

OBJECTIVE To determine escape rates for dogs confined to their owner's property by various containment methods and determine whether biting history was associated with containment method. DESIGN Cross-sectional survey. SAMPLE 974 owners of 1,053 dogs. PROCEDURES Individuals patronizing pet stores in Columbus, Ohio, were recruited to complete a survey on the method they used to confine their dogs to their property and their dogs' behavior history. RESULTS Dogs were confined to their owner's property by a physical fence (821/1,053 [78.0%]), electronic fence (150/1,053 [14.2%]), or tether system (82/1,053 [7.8%]). Dogs confined by an electronic fence were more likely to have escaped (66/150 [44.0%]) than were dogs confined by a see-through fence (153/658 [23.3%]), privacy fence (38/163 [23.3%]), or tether (22/82 [26.8%]). Forty-eight (4.6%) dogs had reportedly bitten a person in the past, and 81 (7.7%) had reportedly bitten another dog, but containment method was not significantly associated with whether dogs had ever bitten a person or another dog. Greeting behavior (growling, snarling, or trying to bite) was significantly associated with a history of biting a person or another dog. CONCLUSIONS AND CLINICAL RELEVANCE Results suggested that escape rate, but not biting history, was associated with the method owners used to confine dogs to their properties. Greeting behavior was associated with biting history, suggesting that owners of dogs that growl, snarl, or attempt to bite when meeting an unfamiliar person or dog should seek assistance to prevent future bites.

Exploring lay perceptions of the causes of crib-biting/windsucking behaviour in horses.

PubMed

Litva, A; Robinson, C S; Archer, D C

2010-05-01

Crib-biting/windsucking behaviour has important consequences for equine health and welfare. Lay perceptions of health and illness are of interest to medical sociologists, providing important information to medical practitioners, but have infrequently been applied in veterinary research. To demonstrate how lay epidemiology can be applied within veterinary research by exploring the lay perceptions regarding the causes of crib-biting/windsucking behaviour in horses. Informants were recruited from professional and amateur horse owners who had or had not owned/cared for a horse that exhibited crib-biting/windsucking behaviour. In-depth interviews were used to examine perceptions about the development of this behaviour within each group until a 'saturation' of themes emerged. The main themes that emerged as causes of crib-biting/windsucking behaviour were 'boredom', 'stress' and 'habit/addiction'. In the group of owners/carers who did not have direct experience of this type of behaviour, 'copying' from other horses emerged as a strong theme and they stated that they would not wish to own a crib-biting/windsucking horse. In contrast, those who had direct experience of horses demonstrating this behaviour did not believe copying was a cause based on their own observations and would not be put off purchasing or caring for another horse displaying this behaviour. Perceptions about what causes crib-biting/windsucking was influenced by whether or not informants had personal experience of horses demonstrating this behaviour. The three main themes that emerged have some justification based on current research and highlight the need for further investigation into the underlying pathophysiology of crib-biting/windsucking behaviour. Qualitative approaches to health, disease and behaviour have an important role in the medical field and are applicable to veterinary research.

Field evaluation of commercial repellents against the floodwater mosquito Psorophora columbiae (Diptera: Culicidae) in St. Johns County, Florida.

PubMed

Qualls, Whitney A; Xue, Rui-De; Holt, J Adam; Smith, Mike L; Moeller, Jeanne J

2011-11-01

Three plant-based repellents-REPEL LEMON Eucalyptus Insect Repellent Lotion (active ingredient [AI] 30% oil of eucalyptus), Bite Blocker Xtreme Sportsman Organic Insect Repellent ([AI] 3% soybean oil, 6% geranium oil, and 8% castor oil), and Bite Blocker BioUD Insect Repellent ([AI] 7.75% 2-undecanone)--were evaluated against OFF! ([AI] 15% N,N-diethyl-m-toluamide or N,N-diethyl-3-methyl-benzamide, also called DEET) at a field site in Elkton, FL, to determine the mean protection time provided against Psorophora columbiae (Dyar & Knab). These products provided different protection times against biting Ps. columbiae. REPEL provided the longest protection time (330 min) followed by Bite Blocker Xtreme Sportsman (163 min), Bite Blocker BioUD (140 min), and OFF! (130 min). This study provides the first information about plant-based insect repellent protection times against Ps. columbiae.

Rat-bite fever presenting with rash and septic arthritis.

PubMed

Kanechorn Na Ayuthaya, Rajyani; Niumpradit, Nucha

2005-11-01

Rat-bite fever is an uncommon disease known for its endemicity to occur worldwide. Although most patients tend to develop mild symptoms with improvement from conventional antibiotics, it can progress with severe complications with a mortality rate as high as 13% without proper treatment. The authors report a complicated case of rat bite-fever involving a 61-year old woman who presented with fever petechial rash, and septic arthritis following a rat bite. Initially, multiple antibiotics were administered but were not effective. As a consequence, invasive procedures such as arthrotomy and joint debridement were done and prolonged antibiotic was administered until clinical resolution. Since many cases do not have a history of rat bite and may present with fever, rashes, and arthritis it is essential to distinguish it from other diseases. Here, the authors will provide details on the etiology, clinical manifestations, diagnosis, and management to aid prompt detection and treatment of the disease.

A rare cause of severe periorbital edema and dermonecrotic ulcer of the eyelid in a child: brown recluse spider bite.

PubMed

Taşkesen, Mustafa; Akdeniz, Sedat; Taş, Taşkin; Keklikçi, Uğur; Taş, Mehmet Ali

2011-01-01

Spider bites are a worldwide problem. Brown recluse spider bites can lead to severe local or systemic clinical effects, such as edema, necrotic ulcer, rashes, fever, chills, nausea, vomiting, malaise, arthralgia, myalgia, hemolysis, leukocytosis, disseminated intravascular coagulation, renal failure, and death. Eyelid bites from brown recluse spiders are rare. We report a child with severe facial edema and a dermonecrotic ulcer on the eyelid. Upon laboratory examination, leukocytosis with a significant left shift was detected. The patient was treated with antibiotics, systemic corticosteroid and conservative therapy that included saline compresses and ocular lubrication. No surgical excision was required. Vision was not impaired. A dermonecrotic ulcer is a severe complication of brown recluse spider bites. Since the diagnosis is difficult, clinical and epidemiological findings and a detailed history are important for an accurate diagnosis.

Skeletal anchorage for intrusion of bimaxillary molars in a patient with skeletal open bite and temporomandibular disorders

PubMed Central

Iwasa, Akihiko; Horiuchi, Shinya; Kinouchi, Nao; Izawa, Takashi; Hiasa, Masahiro; Kawai, Nobuhiko; Yasue, Akihiro; Hassan, Ali H.; Tanaka, Eiji

2017-01-01

The treatment of severe skeletal anterior open bite is extremely difficult in adults, and orthognathic surgery is generally selected for its treatment. We report the case of an 18-year-old adult patient with skeletal anterior open bite and temporomandibular disorders who was successfully treated using temporary anchorage devices. She had an open bite of −2.0 mm and an increased facial height. Miniplates were implanted in both the maxilla and mandible, and molar intrusion resulted in counterclockwise rotation of the mandible over a period of 12 months. After active treatment, her upper and lower first molars were intruded by approximately 2 mm and her overbite became +2.5 mm. Her retrognathic profile improved with counterclockwise rotation of the mandible. Orthodontic treatment aided with skeletal anchorage is beneficial for intrusion of bimaxillary molars in patients with anterior open bite. PMID:29119097

Multiple joint muscle function with ageing: the force-velocity and power-velocity relationships in young and older men.

PubMed

Allison, Sarah J; Brooke-Wavell, Katherine; Folland, Jonathan P

2013-05-01

Whilst extensive research has detailed the loss of muscle strength with ageing for isolated single joint actions, there has been little attention to power production during more functionally relevant multiple joint movements. The extent to which force or velocity are responsible for the loss in power with ageing is also equivocal. The aim of this study was to evaluate the contribution of force and velocity to the differences in power with age by comparing the force-velocity and power-velocity relationships in young and older men during a multiple joint leg press movement. Twenty-one older men (66 ± 3 years) and twenty-three young men (24 ± 2 years) completed a series of isometric (maximum and explosive) and dynamic contractions on a leg press dynamometer instrumented to record force and displacement. The force-velocity relationship was lower for the older men as reflected by their 19 % lower maximum isometric strength (p < 0.001). Explosive isometric strength (peak rate of force development) was 21 % lower for the older men (p < 0.05) but was similar between groups when normalised to maximum strength (p = 0.58). The power-velocity relationship was lower for the older men as shown by reduced maximum power (-28 %, p < 0.001) and lower force (-20 %, p < 0.001) and velocity (-11 %, p < 0.05). Whilst force and velocity were lower in older men, the decrement in force was greater and therefore the major explanation for the attenuation of power during a functionally relevant multiple joint movement.

Response of discrete linear systems to forcing functions with inequality constraints.

NASA Technical Reports Server (NTRS)

Michalopoulos, C. D.; Riley, T. A.

1972-01-01

An analysis is made of the maximum response of discrete, linear mechanical systems to arbitrary forcing functions which lie within specified bounds. Primary attention is focused on the complete determination of the forcing function which will engender maximum displacement to any particular mass element of a multi-degree-of-freedom system. In general, the desired forcing function is found to be a bang-bang type function, i.e., a function which switches from the maximum to the minimum bound and vice-versa at certain instants of time. Examples of two-degree-of-freedom systems, with and without damping, are presented in detail. Conclusions are drawn concerning the effect of damping on the switching times and the general procedure for finding these times is discussed.

CT-derived indices of canine osteosarcoma-affected antebrachial strength.

PubMed

Garcia, Tanya C; Steffey, Michele A; Zwingenberger, Allison L; Daniel, Leticia; Stover, Susan M

2017-05-01

To improve the prediction of fractures in dogs with bone tumors of the distal radius by identifying computed tomography (CT) indices that correlate with antebrachial bone strength and fracture location. Prospective experimental study. Dogs with antebrachial osteosarcoma (n = 10), and normal cadaver bones (n=9). Antebrachia were imaged with quantitative CT prior to biomechanical testing to failure. CT indices of structural properties were compared to yield force and maximum force using Pearson correlation tests. Straight beam failure (Fs), axial rigidity, curved beam failure (Fc), and craniocaudal bending moment of inertia (MOICrCd) CT indices most highly correlated (0.77 > R > 0.57) with yield and maximum forces when iOSA-affected and control bones were included in the analysis. Considering only OSA-affected bones, Fs, Fc, and axial rigidity correlated highly (0.85 > R > 0.80) with maximum force. In affected bones, the location of minimum axial rigidity and maximum MOICrCd correlated highly (R > 0.85) with the actual fracture location. CT-derived axial rigidity, Fs, and MOICrCd have strong linear relationships with yield and maximum force. These indices should be further evaluated prospectively in OSA-affected dogs that do, and do not, experience pathologic fracture. © 2017 The American College of Veterinary Surgeons.

Pneumatic Control Device for the Pershing 2 Adaption Kit

DTIC Science & Technology

1979-03-14

forward force to main- tain a pressure seal (this, versus an-I6-to 25 pound maximum reverse .force component due to pressure). In all probability, initial...stem forward force to main- tain a pressure seal (this, versus an 48-to-25-pound maximum " reverse.force, component due-topressue). In-all probability...PII Li L! Ramn Eniern Inc Contrato . 2960635 GAS GENERATOR COMPATIBILITY U TEST REPORT 1.j Requirement s The requirements for the Pershing II, Phase I

Psychophysically determined forces of dynamic pushing for female industrial workers: Comparison of two apparatuses.

PubMed

Ciriello, Vincent M; Maikala, Rammohan V; Dempsey, Patrick G; O'Brien, Niall V

2010-01-01

Using psychophysics, the maximum acceptable forces for pushing have been previously developed using a magnetic particle brake (MPB) treadmill at the Liberty Mutual Research Institute for Safety. The objective of this study was to investigate the reproducibility of maximum acceptable initial and sustained forces while performing a pushing task at a frequency of 1min(-1) both on a MPB treadmill and on a high-inertia pushcart. This is important because our pushing guidelines are used extensively as a ergonomic redesign strategy and we would like the information to be as applicable as possible to cart pushing. On two separate days, nineteen female industrial workers performed a 40-min MPB treadmill pushing task and a 2-hr pushcart task, in the context of a larger experiment. During pushing, the subjects were asked to select a workload they could sustain for 8h without "straining themselves or without becoming unusually tired, weakened, overheated or out of breath." The results demonstrated that maximum acceptable initial and sustained forces of pushing determined on the high inertia pushcart were 0.8% and 2.5% lower than the MPB treadmill. The results also show that the maximum acceptable sustained force of the MPB treadmill task was 0.5% higher than the maximum acceptable sustained force of Snook and Ciriello (1991). Overall, the findings confirm that the existing pushing data developed by the Liberty Mutual Research Institute for Safety still provides an accurate estimate of maximal acceptable forces for the selected combination of distance and frequency of push for female industrial workers.