Sample records for maximum class size

  1. The Determinants of Parental Effort in Education Production: Do Parents Respond to Changes in Class Size?

    ERIC Educational Resources Information Center

    Bonesronning, Hans

    2004-01-01

    The present paper supplements the traditional class size literature by exploring the causal relationship between class size and parental effort in education production. Class size variation that is exogenous to parental effort comes from interaction between enrollment and a maximum class size rule of 30 students in the lower secondary school in…

  2. Class Size: What Research Says and What It Means for State Policy

    ERIC Educational Resources Information Center

    Whitehurst, Grover J.; Chingos, Matthew M.

    2011-01-01

    Class size is one of the small number of variables in American K-12 education that are both thought to influence student learning and are subject to legislative action. Legislative mandates on maximum class size have been very popular at the state level. In recent decades, at least 24 states have mandated or incentivized class-size reduction…

  3. 77 FR 10724 - Western Pacific Pelagic Fisheries; American Samoa Longline Limited Entry Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-23

    ... size class falls below the maximum allowed. Six permits are available, as follows: Four in Class A (vessels less than or equal to 40 ft in overall length); and Two in Class D (over 70 ft in overall length... the highest priority to the applicant (for any vessel size class) with the earliest documented...

  4. Biomass and productivity of three phytoplankton size classes in San Francisco Bay.

    USGS Publications Warehouse

    Cole, B.E.; Cloern, J.E.; Alpine, A.E.

    1986-01-01

    The 5-22 mu m size accounted for 40-50% of annual production in each embayment, but production by phytoplanton >22 mu m ranged from 26% in the S reach to 54% of total phytoplankton production in the landward embayment of the N reach. A productivity index is derived that predicts daily productivity for each size class as a function of ambient irradiance and integrated chlorophyll a in the photic zone. For the whole phytoplankton community and for each size class, this index was constant at approx= 0.76 g C m-2 (g chlorophyll a Einstein)-1. The annual means of maximum carbon assimilation numbers were usually similar for the three size classes. Spatial and temporal variations in size-fractionated productivity are primarily due to differences in biomass rather than size-dependent carbon assimilation rates. -from Authors

  5. Disadvantaged Students in the Early Grades: Will Smaller Classes Help Them?

    ERIC Educational Resources Information Center

    Vaag Iversen, Jon Marius; Bonesrønning, Hans

    2013-01-01

    This paper uses data from the Norwegian elementary school to test whether students from disadvantaged backgrounds benefit from smaller classes. The data cover one cohort of fourth graders who have been treated in small versus large classes for a period of three years. The Norwegian class size rule of maximum 28 students is used to generate…

  6. Industrial Communications.

    ERIC Educational Resources Information Center

    Lindsay, Dan

    Intended for seniors planning a career in industry as skilled laborers, this specialized course in Industrial Communications offers the student basic communications skills which he will need in his work and in his daily life. Since class activities center around short, factual oral reports, class size will be limited to 20, providing a maximum of…

  7. Maximum Pre-Angiogenic Tumor Size

    ERIC Educational Resources Information Center

    Erickson, Amy H. Lin

    2010-01-01

    This material has been used twice as an out-of-class project in a mathematical modeling class, the first elective course for mathematics majors. The only prerequisites for this course were differential and integral calculus, but all students had been exposed to differential equations, and the project was assigned during discussions about solving…

  8. Determining maximum stand density index in mixed species stands for strategic-scale stocking assessments

    Treesearch

    Chris W. Woodall; Patrick D. Miles; John S. Vissage

    2005-01-01

    Stand density index (SDI), although developed for use in even-aged monocultures, has been used for assessing stand density in large-scale forest inventories containing diverse tree species and size distributions. To improve application of SDI in unevenaged, mixed species stands present in large-scale forest inventories, trends in maximum SDI across diameter classes...

  9. Food intake and growth of Sarsia tubulosa (SARS, 1835), with quantitative estimates of predation on copepod populations

    NASA Astrophysics Data System (ADS)

    Daan, Rogier

    In laboratory tests food intake by the hydromedusa Sarsia tubulosa, which feeds on copepods, was quantified. Estimates of maximum predation are presented for 10 size classes of Sarsia. Growth rates, too, were determined in the laboratory, at 12°C under ad libitum food conditions. Mean gross food conversion for all size classes averaged 12%. From the results of a frequent sampling programme, carried out in the Texelstroom (a tidal inlet of the Dutch Wadden Sea) in 1983, growth rates of Sarsia in the field equalled maximum growth under experimental conditions, which suggests that Sarsia in situ can feed at an optimum level. Two estimates of predation pressure in the field matched very closely and lead to the conclusion that the impact of Sarsia predation on copepod standing stocks in the Dutch coastal area, including the Wadden Sea, is generally negligible.

  10. Rethinking police training policies: large class sizes increase risk of police sexual misconduct.

    PubMed

    Reingle Gonzalez, Jennifer M; Bishopp, Stephen A; Jetelina, Katelyn K

    2016-09-01

    The limited research on police sexual misconduct (PSM), a common form of police misconduct, suggests that no evidence-based strategies for prevention are available for use by police departments. To identify new avenues for prevention, we critically evaluated 'front-end' police recruiting, screening, hiring and training procedures. Internal Affairs records were linked with administrative reports and police academy graduation data for officers accused of sexual assault or misconduct between 1994 and 2014. Logistic and proportional hazards regression methods were used to identify predictors of discharge for sustained allegations of PSM and time to discharge, respectively. Officer's graduating class size was positively associated with odds of discharge for PSM. For every one-officer increase in class size, the rate of discharge for PSM increased by 9% [hazard ratio (HR) = 1.09, P < 0.01]. For particularly large classes (>35 graduates), discharge rates were at least four times greater than smaller classes (HR = 4.43, P < 0.05). Large class sizes and more annual graduates increase rates of PSM. Officer recruitment strategies or training quality may be compromised during periods of intensive hiring. Trainee to instructor ratios or maximum class sizes may be instituted by academies to ensure that all police trainees receive the required supervision, one-on-one training, feedback and attention necessary to maximize public safety. © The Author 2015. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  11. Maximum likelihood estimation of finite mixture model for economic data

    NASA Astrophysics Data System (ADS)

    Phoong, Seuk-Yen; Ismail, Mohd Tahir

    2014-06-01

    Finite mixture model is a mixture model with finite-dimension. This models are provides a natural representation of heterogeneity in a finite number of latent classes. In addition, finite mixture models also known as latent class models or unsupervised learning models. Recently, maximum likelihood estimation fitted finite mixture models has greatly drawn statistician's attention. The main reason is because maximum likelihood estimation is a powerful statistical method which provides consistent findings as the sample sizes increases to infinity. Thus, the application of maximum likelihood estimation is used to fit finite mixture model in the present paper in order to explore the relationship between nonlinear economic data. In this paper, a two-component normal mixture model is fitted by maximum likelihood estimation in order to investigate the relationship among stock market price and rubber price for sampled countries. Results described that there is a negative effect among rubber price and stock market price for Malaysia, Thailand, Philippines and Indonesia.

  12. Interference Fit Life Factors for Roller Bearings

    NASA Technical Reports Server (NTRS)

    Oswald, Fred B.; Zaretsky, Erwin V.; Poplawski, Joseph V.

    2008-01-01

    The effect of hoop stresses in reducing cylindrical roller bearing fatigue life was determined for various classes of inner ring interference fit. Calculations were performed for up to seven interference fit classes for each of ten bearing sizes. Each fit was taken at tightest, average and loosest values within the fit class for RBEC-5 tolerance, thus requiring 486 separate analyses. The hoop stresses were superimposed on the Hertzian principal stresses created by the applied radial load to calculate roller bearing fatigue life. The method was developed through a series of equations to calculate the life reduction for cylindrical roller bearings based on interference fit. All calculated lives are for zero initial bearing internal clearance. Any reduction in bearing clearance due to interference fit was compensated by increasing the initial (unmounted) clearance. Results are presented as tables and charts of life factors for bearings with light, moderate and heavy loads and interference fits ranging from extremely light to extremely heavy and for bearing accuracy class RBEC 5 (ISO class 5). Interference fits on the inner bearing ring of a cylindrical roller bearing can significantly reduce bearing fatigue life. In general, life factors are smaller (lower life) for bearings running under light load where the unfactored life is highest. The various bearing series within a particular bore size had almost identical interference fit life factors for a particular fit. The tightest fit at the high end of the RBEC-5 tolerance band defined in ANSI/ABMA shaft fit tables produces a life factor of approximately 0.40 for an inner-race maximum Hertz stress of 1200 MPa (175 ksi) and a life factor of 0.60 for an inner-race maximum Hertz stress of 2200 MPa (320 ksi). Interference fits also impact the maximum Hertz stress-life relation.

  13. Satellite-observed variability of phytoplankton size classes associated with a cold eddy in the South China Sea.

    PubMed

    Lin, Junfang; Cao, Wenxi; Wang, Guifen; Hu, Shuibo

    2014-06-15

    Ocean-color remote sensing has been used as a tool to detect phytoplankton size classes (PSCs). In this study, a three-component model of PSC was reparameterized using seven years of pigment measurements acquired in the South China Sea (SCS). The model was then used to infer PSC in a cyclonic eddy which was observed west of Luzon Island from SeaWiFS chlorophyll-a (chla) and sea-surface height anomaly (SSHA) products. Enhanced productivity and a shift in the PSC were observed, which were likely due to upwelling of nutrient-rich water into the euphotic zone. The supply of nutrients promoted the growth of larger cells (micro- and nanoplankton), and the PSC shifted to greater sizes. However, the picoplankton were still important and contributed ∼48% to total chla concentration. In addition, PSC time series revealed a lag period of about three weeks between maximum eddy intensity and maximum chlorophyll, which may have been related to phytoplankton growth rate and duration of eddy intensity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Interference-Fit Life Factors for Roller Bearings

    NASA Technical Reports Server (NTRS)

    Oswald, Fred B.; Zaretsky, Erwin V.; Poplawski, Joseph V.

    2009-01-01

    The effect of hoop stresses in reducing cylindrical roller bearing fatigue life was determined for various classes of inner-ring interference fit. Calculations were performed for up to 7 fit classes for each of 10 bearing sizes. The hoop stresses were superimposed on the Hertzian principal stresses created by the applied radial load to calculate roller bearing fatigue life. A method was developed through a series of equations to calculate the life reduction for cylindrical roller bearings. All calculated lives are for zero initial internal clearance. Any reduction in bearing clearance due to interference fit would be compensated by increasing the initial (unmounted) clearance. Results are presented as tables and charts of life factors for bearings with light, moderate, and heavy loads and interference fits ranging from extremely light to extremely heavy for bearing accuracy class RBEC-5 (ISO class 5). Interference fits on the inner ring of a cylindrical roller bearing can significantly reduce bearing fatigue life. In general, life factors are smaller (lower life) for bearings running under light load where the unfactored life is highest. The various bearing series within a particular bore size had almost identical interference-fit life factors for a particular fit. The tightest fit at the high end of the tolerance band produces a life factor of approximately 0.40 for an inner-race maximum Hertz stress of 1200 MPa (175 ksi) and a life factor of 0.60 for an inner-race maximum Hertz stress of 2200 MPa (320 ksi). Interference fits also impact the maximum Hertz stress-life relation.

  15. Comparing the Performance of Improved Classify-Analyze Approaches For Distal Outcomes in Latent Profile Analysis

    PubMed Central

    Dziak, John J.; Bray, Bethany C.; Zhang, Jieting; Zhang, Minqiang; Lanza, Stephanie T.

    2016-01-01

    Several approaches are available for estimating the relationship of latent class membership to distal outcomes in latent profile analysis (LPA). A three-step approach is commonly used, but has problems with estimation bias and confidence interval coverage. Proposed improvements include the correction method of Bolck, Croon, and Hagenaars (BCH; 2004), Vermunt’s (2010) maximum likelihood (ML) approach, and the inclusive three-step approach of Bray, Lanza, & Tan (2015). These methods have been studied in the related case of latent class analysis (LCA) with categorical indicators, but not as well studied for LPA with continuous indicators. We investigated the performance of these approaches in LPA with normally distributed indicators, under different conditions of distal outcome distribution, class measurement quality, relative latent class size, and strength of association between latent class and the distal outcome. The modified BCH implemented in Latent GOLD had excellent performance. The maximum likelihood and inclusive approaches were not robust to violations of distributional assumptions. These findings broadly agree with and extend the results presented by Bakk and Vermunt (2016) in the context of LCA with categorical indicators. PMID:28630602

  16. A mechanistic assessment of seasonal microhabitat selection by drift-feeding rainbow trout Oncorhynchus mykiss in a southwestern headwater stream

    USGS Publications Warehouse

    Kalb, Bradley W.; Huntsman, Brock M.; Caldwell, Colleen A.; Bozek, Michael A.

    2018-01-01

    The positioning of fishes within a riverscape is dependent on the proximity of complementary habitats. In this study, foraging and non-foraging habitat were quantified monthly over an entire year for a rainbow trout (Oncorhynchus mykiss) population in an isolated, headwater stream in southcentral New Mexico. The stream follows a seasonal thermal and hydrologic pattern typical for a Southwestern stream and was deemed suitable for re-introduction of the native and close relative, Rio Grande cutthroat trout (O. clarkii virginalis). However, uncertainty associated with limited habitat needed to be resolved if repatriation of the native fish was to be successful. Habitat was evaluated using resource selection functions with a mechanistic drift-foraging model to explain trout distributions. Macroinvertebrate drift was strongly season- and temperature-dependent (lower in winter and spring, higher in summer and fall). Models identified stream depth as the most limiting factor for habitat selection across seasons and size-classes. Additionally, positions closer to cover were selected during the winter by smaller size-classes (0, 1, 2), while net energy intake was important during the spring for most size-classes (0, 1, 2, 3). Drift-foraging models identified that 81% of observed trout selected positions that could meet maintenance levels throughout the year. Moreover, 40% of selected habitats could sustain maximum growth. Stream positions occupied by rainbow trout were more energetically profitable than random sites regardless of season or size-class. Larger size-classes (3, 4+) were energetically more limited throughout the year than were smaller size-classes. This research suggests that habitat in the form of deep pools is of paramount importance for rainbow trout or native cutthroat trout.

  17. The Influence of pH on Prokaryotic Cell Size and Temperature

    NASA Astrophysics Data System (ADS)

    Sundararajan, D.; Gutierrez, F.; Heim, N. A.; Payne, J.

    2015-12-01

    The pH of a habitat is essential to an organism's growth and success in its environment. Although most organisms maintain a neutral internal pH, their environmental pH can vary greatly. However, little research has been done concerning an organism's environmental pH across a wide range of taxa. We studied pH tolerance in prokaryotes and its relationship with biovolume, taxonomic classification, and ideal temperature. We had three hypotheses: pH and temperature are not correlated; pH tolerance is similar within taxonomic groups; and extremophiles have small cell sizes. To test these hypotheses, we used pH, size, and taxonomic data from The Prokaryotes. We found that the mean optimum external pH was neutral for prokaryotes as a whole and when divided by domain, phylum, and class. Using ANOVA to test for pH within and among group variances, we found that variation of pH in domains, phyla, classes, and families was greater than between them. pH and size did not show much of a correlation, except that the largest and smallest sized prokaryotes had nearly neutral pH. This seems significant because extremophiles need to divert more of their energy from growth to maintain a neutral internal pH. Acidophiles showed a larger range of optimum pH values than alkaliphiles. A similar result was seen with the minimum and maximum pH values of acidophiles and alkaliphiles. While acidophiles were spread out and had some alkaline maximum values, alkaliphiles had smaller ranges, and unlike some acidophiles that had pH minimums close to zero, alkaliphile pH maximums did not go beyond a pH of 12. No statistically significant differences were found between sizes of acidophiles and alkaliphiles. However, optimum temperatures of acidophiles and alkaliphiles did have a statistically significant difference. pH and temperature had a negative correlation. Therefore, pH seems to have a correlation with cell size, temperature, and taxonomy to some extent.

  18. Forest inventory using multistage sampling with probability proportional to size. [Brazil

    NASA Technical Reports Server (NTRS)

    Parada, N. D. J. (Principal Investigator); Lee, D. C. L.; Hernandezfilho, P.; Shimabukuro, Y. E.; Deassis, O. R.; Demedeiros, J. S.

    1984-01-01

    A multistage sampling technique, with probability proportional to size, for forest volume inventory using remote sensing data is developed and evaluated. The study area is located in the Southeastern Brazil. The LANDSAT 4 digital data of the study area are used in the first stage for automatic classification of reforested areas. Four classes of pine and eucalypt with different tree volumes are classified utilizing a maximum likelihood classification algorithm. Color infrared aerial photographs are utilized in the second stage of sampling. In the third state (ground level) the time volume of each class is determined. The total time volume of each class is expanded through a statistical procedure taking into account all the three stages of sampling. This procedure results in an accurate time volume estimate with a smaller number of aerial photographs and reduced time in field work.

  19. Apparent Disk-mass Reduction and Planetisimal Formation in Gravitationally Unstable Disks in Class 0/I Young Stellar Objects

    NASA Astrophysics Data System (ADS)

    Tsukamoto, Y.; Okuzumi, S.; Kataoka, A.

    2017-04-01

    We investigate the dust structure of gravitationally unstable disks undergoing mass accretion from the envelope, envisioning its application to Class 0/I young stellar objects (YSOs). We find that the dust disk quickly settles into a steady state and that, compared to a disk with interstellar medium (ISM) dust-to-gas mass ratio and micron-sized dust, the dust mass in the steady state decreases by a factor of 1/2 to 1/3, and the dust thermal emission decreases by a factor of 1/3 to 1/5. The latter decrease is caused by dust depletion and opacity decrease owing to dust growth. Our results suggest that the masses of gravitationally unstable disks in Class 0/I YSOs are underestimated by a factor of 1/3 to 1/5 when calculated from the dust thermal emission assuming an ISM dust-to-gas mass ratio and micron-sized dust opacity, and that a larger fraction of disks in Class 0/I YSOs is gravitationally unstable than was previously believed. We also investigate the orbital radius {r}{{P}} within which planetesimals form via coagulation of porous dust aggregates and show that {r}{{P}} becomes ˜20 au for a gravitationally unstable disk around a solar mass star. Because {r}{{P}} increases as the gas surface density increases and a gravitationally unstable disk has maximum gas surface density, {r}{{P}}˜ 20 {au} is the theoretical maximum radius for planetesimal formation. We suggest that planetesimal formation in the Class 0/I phase is preferable to that in the Class II phase because a large amount of dust is supplied by envelope-to-disk accretion.

  20. On Determining the Rise, Size, and Duration Classes of a Sunspot Cycle

    NASA Astrophysics Data System (ADS)

    Wilson, Robert M.; Hathaway, David H.; Reichmann, Edwin J.

    1996-09-01

    The behavior of ascent duration, maximum amplitude, and period for cycles 1 to 21 suggests that they are not mutually independent. Analysis of the resultant three-dimensional contingency table for cycles divided according to rise time (ascent duration), size (maximum amplitude), and duration (period) yields a chi-square statistic (= 18.59) that is larger than the test statistic (= 9.49 for 4 degrees-of-freedom at the 5-percent level of significance), thereby, inferring that the null hypothesis (mutual independence) can be rejected. Analysis of individual 2 by 2 contingency tables (based on Fisher's exact test) for these parameters shows that, while ascent duration is strongly related to maximum amplitude in the negative sense (inverse correlation) - the Waldmeier effect, it also is related (marginally) to period, but in the positive sense (direct correlation). No significant (or marginally significant) correlation is found between period and maximum amplitude. Using cycle 22 as a test case, we show that by the 12th month following conventional onset, cycle 22 appeared highly likely to be a fast-rising, larger-than-average-size cycle. Because of the inferred correlation between ascent duration and period, it also seems likely that it will have a period shorter than average length.

  1. On Determining the Rise, Size, and Duration Classes of a Sunspot Cycle

    NASA Technical Reports Server (NTRS)

    Wilson, Robert M.; Hathaway, David H.; Reichmann, Edwin J.

    1996-01-01

    The behavior of ascent duration, maximum amplitude, and period for cycles 1 to 21 suggests that they are not mutually independent. Analysis of the resultant three-dimensional contingency table for cycles divided according to rise time (ascent duration), size (maximum amplitude), and duration (period) yields a chi-square statistic (= 18.59) that is larger than the test statistic (= 9.49 for 4 degrees-of-freedom at the 5-percent level of significance), thereby, inferring that the null hypothesis (mutual independence) can be rejected. Analysis of individual 2 by 2 contingency tables (based on Fisher's exact test) for these parameters shows that, while ascent duration is strongly related to maximum amplitude in the negative sense (inverse correlation) - the Waldmeier effect, it also is related (marginally) to period, but in the positive sense (direct correlation). No significant (or marginally significant) correlation is found between period and maximum amplitude. Using cycle 22 as a test case, we show that by the 12th month following conventional onset, cycle 22 appeared highly likely to be a fast-rising, larger-than-average-size cycle. Because of the inferred correlation between ascent duration and period, it also seems likely that it will have a period shorter than average length.

  2. 46 CFR 56.30-20 - Threaded joints.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., inches Maximum pressure, p.s.i.g. Above 2″ (Not permitted in Class I piping service.) Above 1″ up to 2... joints appear in the low temperature piping section. 2 Threaded joints in hydraulic systems are permitted above the pressures indicated for the nominal sizes shown when commercially available components such as...

  3. 46 CFR 56.30-20 - Threaded joints.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., inches Maximum pressure, p.s.i.g. Above 2″ (Not permitted in Class I piping service.) Above 1″ up to 2... joints appear in the low temperature piping section. 2 Threaded joints in hydraulic systems are permitted above the pressures indicated for the nominal sizes shown when commercially available components such as...

  4. 46 CFR 56.30-20 - Threaded joints.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., inches Maximum pressure, p.s.i.g. Above 2″ (Not permitted in Class I piping service.) Above 1″ up to 2... joints appear in the low temperature piping section. 2 Threaded joints in hydraulic systems are permitted above the pressures indicated for the nominal sizes shown when commercially available components such as...

  5. 46 CFR 56.30-20 - Threaded joints.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., inches Maximum pressure, p.s.i.g. Above 2″ (Not permitted in Class I piping service.) Above 1″ up to 2... joints appear in the low temperature piping section. 2 Threaded joints in hydraulic systems are permitted above the pressures indicated for the nominal sizes shown when commercially available components such as...

  6. 46 CFR 56.30-20 - Threaded joints.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., inches Maximum pressure, p.s.i.g. Above 2″ (Not permitted in Class I piping service.) Above 1″ up to 2... joints appear in the low temperature piping section. 2 Threaded joints in hydraulic systems are permitted above the pressures indicated for the nominal sizes shown when commercially available components such as...

  7. Comparisons of neural networks to standard techniques for image classification and correlation

    NASA Technical Reports Server (NTRS)

    Paola, Justin D.; Schowengerdt, Robert A.

    1994-01-01

    Neural network techniques for multispectral image classification and spatial pattern detection are compared to the standard techniques of maximum-likelihood classification and spatial correlation. The neural network produced a more accurate classification than maximum-likelihood of a Landsat scene of Tucson, Arizona. Some of the errors in the maximum-likelihood classification are illustrated using decision region and class probability density plots. As expected, the main drawback to the neural network method is the long time required for the training stage. The network was trained using several different hidden layer sizes to optimize both the classification accuracy and training speed, and it was found that one node per class was optimal. The performance improved when 3x3 local windows of image data were entered into the net. This modification introduces texture into the classification without explicit calculation of a texture measure. Larger windows were successfully used for the detection of spatial features in Landsat and Magellan synthetic aperture radar imagery.

  8. Effects of maximum aggregate size on UPV of brick aggregate concrete.

    PubMed

    Mohammed, Tarek Uddin; Mahmood, Aziz Hasan

    2016-07-01

    Investigation was carried out to study the effects of maximum aggregate size (MAS) (12.5mm, 19.0mm, 25.0mm, 37.5mm, and 50.0mm) on ultrasonic pulse velocity (UPV) of concrete. For investigation, first class bricks were collected and broken to make coarse aggregate. The aggregates were tested for specific gravity, absorption capacity, unit weight, and abrasion resistance. Cylindrical concrete specimens were made with different sand to aggregate volume ratio (s/a) (0.40 and 0.45), W/C ratio (0.45, 0.50, and 0.55), and cement content (375kg/m(3) and 400kg/m(3)). The specimens were tested for compressive strength and Young's modulus. UPV through wet specimen was measured using Portable Ultrasonic Non-destructive Digital Indicating Tester (PUNDIT). Results indicate that the pulse velocity through concrete increases with an increase in MAS. Relationships between UPV and compressive strength; and UPV and Young's modulus of concrete are proposed for different maximum sizes of brick aggregate. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Drought survival and reproduction impose contrasting selection pressures on maximum body size and sexual size dimorphism in a snake, Seminatrix pygaea.

    PubMed

    Winne, Christopher T; Willson, John D; Whitfield Gibbons, J

    2010-04-01

    The causes and consequences of body size and sexual size dimorphism (SSD) have been central questions in evolutionary ecology. Two, often opposing selective forces are suspected to act on body size in animals: survival selection and reproductive (fecundity and sexual) selection. We have recently identified a system where a small aquatic snake species (Seminatrix pygaea) is capable of surviving severe droughts by aestivating within dried, isolated wetlands. We tested the hypothesis that the lack of aquatic prey during severe droughts would impose significant survivorship pressures on S. pygaea, and that the largest individuals, particularly females, would be most adversely affected by resource limitation. Our findings suggest that both sexes experience selection against large body size during severe drought when prey resources are limited, as nearly all S. pygaea are absent from the largest size classes and maximum body size and SSD are dramatically reduced following drought. Conversely, strong positive correlations between maternal body size and reproductive success in S. pygaea suggest that females experience fecundity selection for large size during non-drought years. Collectively, our study emphasizes the dynamic interplay between selection pressures that act on body size and supports theoretical predictions about the relationship between body size and survivorship in ectotherms under conditions of resource limitation.

  10. The effects of host size and temperature on the emergence of Echinoparyphium recurvatum cercariae from Lymnaea peregra under natural light conditions.

    PubMed

    Morley, N J; Adam, M E; Lewis, J W

    2010-09-01

    The production of cercariae from their snail host is a fundamental component of transmission success in trematodes. The emergence of Echinoparyphium recurvatum (Trematoda: Echinostomatidae) cercariae from Lymnaea peregra was studied under natural sunlight conditions, using naturally infected snails of different sizes (10-17 mm) within a temperature range of 10-29 degrees C. There was a single photoperiodic circadian cycle of emergence with one peak, which correlated with the maximum diffuse sunlight irradiation. At 21 degrees C the daily number of emerging cercariae increased with increasing host snail size, but variations in cercarial emergence did occur between both individual snails and different days. There was only limited evidence of cyclic emergence patterns over a 3-week period, probably due to extensive snail mortality, particularly those in the larger size classes. Very few cercariae emerged in all snail size classes at the lowest temperature studied (10 degrees C), but at increasingly higher temperatures elevated numbers of cercariae emerged, reaching an optimum between 17 and 25 degrees C. Above this range emergence was reduced. At all temperatures more cercariae emerged from larger snails. Analysis of emergence using the Q10 value, a measure of physiological processes over temperature ranges, showed that between 10 and 21 degrees C (approximately 15 degrees C) Q10 values exceeded 100 for all snail size classes, indicating a substantially greater emergence than would be expected for normal physiological rates. From 14 to 25 degrees C (approximately 20 degrees C) cercarial emergence in most snail size classes showed little change in Q10, although in the smallest size class emergence was still substantially greater than the typical Q10 increase expected over this temperature range. At the highest range of 21-29 degrees C (approximately 25 degrees C), Q10 was much reduced. The importance of these results for cercarial emergence under global climate change is discussed.

  11. On the maximum off-axis gain of symmetrical pencil-beam antennas

    NASA Technical Reports Server (NTRS)

    Sawitz, P. H.

    1977-01-01

    For a general class of symmetrical pencil-beam antennas, the gain at a given off-axis angle can be maximized by choosing the proper antenna size. The maximum gain at the given angle relative to the on-axis gain is independent of the given angle and dependent only on the main-beam pattern. It is computed here for four commonly used gain functions. Its value, in all cases, is close to 4 dB. This result is important in the definition of service areas for communication and broadcast satellites.

  12. Correlation analysis of the optics of progressive addition lenses.

    PubMed

    Sheedy, James E

    2004-05-01

    To investigate the relations between selected key optical parameters and the sizes of the clear viewing areas of progressive addition lenses (PALs). The optics of 28 PALs (plano with +2.00 D add) currently on the market were measured with a Rotlex Class Plus lens analyzer. Horizontal cross sections were analyzed in 1 mm vertical steps with respect to the fitting cross. Distance, intermediate, and near viewing zone widths and areas were calculated from the measurements. The maximum amount of unwanted astigmatism, minimum zone width (0.50 DC limit), and maximum power rate in the corridor were also recorded for each lens. Correlation coefficients were determined for all relations. Each of the three viewing zone areas had a significant negative relation with the other (r of -0.4 to -0.8), indicating design tradeoff. Maximum power rate was significantly related to minimum zone width (r = -0.695), which was significantly related to maximum astigmatism (r = -0.616), but there was not a significant relation between maximum power rate and maximum astigmatism. Higher power rates and narrower minimum zones were significantly related to smaller intermediate and larger near zones (r = 0.4 to 0.9). Maximum astigmatism was related to distance zone width (r = 0.42) and to intermediate zone size (r = -0.4 to -0.56), but not significantly related to near viewing zone. Power rate and astigmatism each vary relatively uniformly across each lens. The fundamental relation appears to be between power rate and zone width, each of which is highly related to sizes of the intermediate and near viewing zones. The maximum amount of astigmatism is related to zone width, but not to maximum power rate. The amount of astigmatism is unrelated to the size of the near zone. The pattern of correlations between the optical and viewing zone parameters help identify the underlying optical relations of PALs.

  13. Bridge-scour analysis on Cuchillo Negro Creek at the Interstate 25 crossing near Truth or Consequences, New Mexico

    USGS Publications Warehouse

    Waltemeyer, S.D.

    1995-01-01

    A sediment-transport model to simulate channel change was applied to a 1-mile reach of Cuchillo Negro Creek at the Interstate 25 crossing at Truth or Consequences, New Mexico, using the Bridge-Stream Tube model for Alluvial River Simulation (BRI-STARS). The 500-year flood discharge was estimated to be 10,700 cubic feet per second. The 100-year, 500-year, and regional maximum discharges were used to design synthetic and discretized hydrographs using a flood volume equation. The regional maximum discharge relation was developed for New Mexico based on 259 streamflow-gaging stations' maximum peak discharge. The regional maximum-peak discharge for the site was determined to be 81,700 cubic feet per second. Bed-material particle-size distribution was determined for six size classes ranging from 1 to 30 millimeters. The median diameter was 4.6 millimeters at the bed surface and 9.0 millimeters 13 feet below the bed surface. Bed-material discharge for use in the model was estimated to be 18,770 tons per day using hydraulic properties, water temperature, and Yang's gravel equation. Channel-change simulations showed a maximum channel degradation of 1.38 feet for the regional maximum-peak discharge hydrograph.

  14. Effects of reclamation years on composition and diversity of soil bacterial communities in Northwest China.

    PubMed

    Cheng, Zhibo; Zhang, Fenghua; Gale, William Jeffrey; Wang, Weichao; Sang, Wen; Yang, Haichang

    2018-01-01

    The objective of this study was to evaluate bacterial community structure and diversity in soil aggregate fractions when salinized farmland was reclaimed after >27 years of abandonment and then farmed again for 1, 5, 10, and 15 years. Illumina MiSeq high-throughput sequencing was performed to characterize the soil bacterial communities in 5 aggregate size classes in each treatment. The results indicated that reclamation significantly increased macro-aggregation (>0.25 mm), as well as soil organic C, available N, and available P. The 10-year field had the largest proportion (93.9%) of soil in the macro-aggregate size classes (i.e., >0.25 mm) and the highest soil electrical conductivity. The 5 most dominant phyla in the soil samples were Proteobacteria, Actinobacteria, Gemmatimonadetes, Acidobacteria, and Bacteroidetes. The phylogenetic diversity, Chao1, and Shannon indices increased after the abandoned land was reclaimed for farming, reaching maximums in the 15-year field. Among aggregate size classes, the 1-0.25 mm aggregates generally had the highest phylogenetic diversity, Chao1, and Shannon indices. Soil organic C and soil electrical conductivity were the main environmental factors affecting the soil bacterial communities. The composition and structure of the bacterial communities also varied significantly depending on soil aggregate size and time since reclamation.

  15. Small benthic size classes along the N.W. European Continental Margin: spatial and temporal variability in activity and biomass

    NASA Astrophysics Data System (ADS)

    Pfannkuche, O.; Soltwedel, T.

    1998-12-01

    In the context of the European OMEX Programme this investigation focused on gradients in the biomass and activity of the small benthic size spectrum along a transect across the Goban Spur from the outer Celtic Sea into Porcupine Abyssal Plain. The effects of food pulses (seasonal, episodic) on this part of the benthic size spectrum were investigated. Sediments sampled during eight expeditions at different seasons covering a range from 200 m to 4800 m water depth were assayed with biochemical bulk measurements: determinations of chloroplastic pigment equivalents (CPE), the sum of chlorophyll a and its breakdown products, provide information concerning the input of phytodetrital matter to the seafloor; phospholipids were analyzed to estimate the total biomass of small benthic organisms (including bacteria, fungi, flagellata, protozoa and small metazoan meiofauna). A new term `small size class biomass' (SSCB) is introduced for the biomass of the smallest size classes of sediment-inhabiting organisms; the reduction of fluorescein-di-acetate (FDA) was determined to evaluate the potential activity of ester-cleaving bacterial exoenzymes in the sediment samples. At all stations benthic biomass was predominantly composed of the small size spectrum (90% on the shelf; 97-98% in the bathyal and abyssal parts of the transect). Small size class biomass (integrated over a 10 cm sediment column) ranged from 8 g C m -2 on the shelf to 2.1 g C m -2 on the adjacent Porcupine Abyssal Plain, exponentially decreasing with increasing water depth. However, a correlation between water depth and SSCB, macrofauna biomass as well as metazoan meiofauna biomass exhibited a significantly flatter slope for the small size classes in comparison to the larger organisms. CPE values indicated a pronounced seasonal cycle on the shelf and upper slope with twin peaks of phytodetrital deposition in mid spring and late summer. The deeper stations seem to receive a single annual flux maximum in late summer. SSCB and heterotrophic activity are significantly correlated to the amount of sediment-bound pigments. Seasonality in pigment concentrations is clearly followed by SSCB and activity. In contrast to macro- and megafauna which integrate over larger periods (months/years), the small benthic size classes, namely bacteria and foraminifera, proved to be the most reactive potential of the benthic communities to any perturbations on short time scales (days/weeks). The small size classes, therefore, occupy a key role in early diagenetic processes.

  16. Regulation of water flux through tropical forest canopy trees: do universal rules apply?

    PubMed

    Meinzer, F C; Goldstein, G; Andrade, J L

    2001-01-01

    Tropical moist forests are notable for their richness in tree species. The presence of such a diverse tree flora presents potential problems for scaling up estimates of water use from individual trees to entire stands and for drawing generalizations about physiological regulation of water use in tropical trees. We measured sapwood area or sap flow, or both, in 27 co-occurring canopy species in a Panamanian forest to determine the extent to which relationships between tree size, sapwood area and sap flow were species-specific, or whether they were constrained by universal functional relationships between tree size, conducting xylem area, and water use. For the 24 species in which active xylem area was estimated over a range of size classes, diameter at breast height (DBH) accounted for 98% of the variation in sapwood area and 67% of the variation in sapwood depth when data for all species were combined. The DBH alone also accounted for > or = 90% of the variation in both maximum and total daily sap flux density in the outermost 2 cm of sapwood for all species taken together. Maximum sap flux density measured near the base of the tree occurred at about 1,400 h in the largest trees and 1,130 h in the smallest trees studied, and DBH accounted for 93% of the variation in the time of day at which maximum sap flow occurred. The shared relationship between tree size and time of maximum sap flow at the base of the tree suggests that a common relationship between diurnal stem water storage capacity and tree size existed. These results are consistent with a recent hypothesis that allometric scaling of plant vascular systems, and therefore water use, is universal.

  17. A general class of multinomial mixture models for anuran calling survey data

    USGS Publications Warehouse

    Royle, J. Andrew; Link, W.A.

    2005-01-01

    We propose a general framework for modeling anuran abundance using data collected from commonly used calling surveys. The data generated from calling surveys are indices of calling intensity (vocalization of males) that do not have a precise link to actual population size and are sensitive to factors that influence anuran behavior. We formulate a model for calling-index data in terms of the maximum potential calling index that could be observed at a site (the 'latent abundance class'), given its underlying breeding population, and we focus attention on estimating the distribution of this latent abundance class. A critical consideration in estimating the latent structure is imperfect detection, which causes the observed abundance index to be less than or equal to the latent abundance class. We specify a multinomial sampling model for the observed abundance index that is conditional on the latent abundance class. Estimation of the latent abundance class distribution is based on the marginal likelihood of the index data, having integrated over the latent class distribution. We apply the proposed modeling framework to data collected as part of the North American Amphibian Monitoring Program (NAAMP).

  18. Error Estimates of the Ares I Computed Turbulent Ascent Longitudinal Aerodynamic Analysis

    NASA Technical Reports Server (NTRS)

    Abdol-Hamid, Khaled S.; Ghaffari, Farhad

    2012-01-01

    Numerical predictions of the longitudinal aerodynamic characteristics for the Ares I class of vehicles, along with the associated error estimate derived from an iterative convergence grid refinement, are presented. Computational results are based on an unstructured grid, Reynolds-averaged Navier-Stokes analysis. The validity of the approach to compute the associated error estimates, derived from a base grid to an extrapolated infinite-size grid, was first demonstrated on a sub-scaled wind tunnel model at representative ascent flow conditions for which the experimental data existed. Such analysis at the transonic flow conditions revealed a maximum deviation of about 23% between the computed longitudinal aerodynamic coefficients with the base grid and the measured data across the entire roll angles. This maximum deviation from the wind tunnel data was associated with the computed normal force coefficient at the transonic flow condition and was reduced to approximately 16% based on the infinite-size grid. However, all the computed aerodynamic coefficients with the base grid at the supersonic flow conditions showed a maximum deviation of only about 8% with that level being improved to approximately 5% for the infinite-size grid. The results and the error estimates based on the established procedure are also presented for the flight flow conditions.

  19. A multiple maximum scatter difference discriminant criterion for facial feature extraction.

    PubMed

    Song, Fengxi; Zhang, David; Mei, Dayong; Guo, Zhongwei

    2007-12-01

    Maximum scatter difference (MSD) discriminant criterion was a recently presented binary discriminant criterion for pattern classification that utilizes the generalized scatter difference rather than the generalized Rayleigh quotient as a class separability measure, thereby avoiding the singularity problem when addressing small-sample-size problems. MSD classifiers based on this criterion have been quite effective on face-recognition tasks, but as they are binary classifiers, they are not as efficient on large-scale classification tasks. To address the problem, this paper generalizes the classification-oriented binary criterion to its multiple counterpart--multiple MSD (MMSD) discriminant criterion for facial feature extraction. The MMSD feature-extraction method, which is based on this novel discriminant criterion, is a new subspace-based feature-extraction method. Unlike most other subspace-based feature-extraction methods, the MMSD computes its discriminant vectors from both the range of the between-class scatter matrix and the null space of the within-class scatter matrix. The MMSD is theoretically elegant and easy to calculate. Extensive experimental studies conducted on the benchmark database, FERET, show that the MMSD out-performs state-of-the-art facial feature-extraction methods such as null space method, direct linear discriminant analysis (LDA), eigenface, Fisherface, and complete LDA.

  20. Predicted time from fertilization to maximum wet weight for steelhead alevins based on incubation temperature and egg size (Study site: Western Fishery Research Center, Seattle; Stock: Dworshak hatchery; Year class: 1996): Chapter 4

    USGS Publications Warehouse

    Rubin, Stephen P.; Reisenbichler, Reginald R.; Slatton, Stacey L.; Rubin, Stephen P.; Reisenbichler, Reginald R.; Wetzel, Lisa A.; Hayes, Michael C.

    2012-01-01

    The accuracy of a model that predicts time between fertilization and maximum alevin wet weight (MAWW) from incubation temperature was tested for steelhead Oncorhynchus mykiss from Dworshak National Fish Hatchery on the Clearwater River, Idaho. MAWW corresponds to the button-up fry stage of development. Embryos were incubated at warm (mean=11.6°C) or cold (mean=7.3°C) temperatures and time between fertilization and MAWW was measured for each temperature. Model predictions of time to MAWW were within 1% of measured time to MAWW. Mean egg weight ranged from 0.101-0.136 g among females (mean = 0.116). Time to MAWW was positively related to egg size for each temperature, but the increase in time to MAWW with increasing egg size was greater for embryos reared at the warm than at the cold temperature. We developed equations accounting for the effect of egg size on time to MAWW for each temperature, and also for the mean of those temperatures (9.3°C).

  1. Effect of roasting degree on the antioxidant activity of different Arabica coffee quality classes.

    PubMed

    Odžaković, Božana; Džinić, Natalija; Kukrić, Zoran; Grujić, Slavica

    2016-01-01

    Coffee is one of the most widely consumed beverages in the world, because of its unique sensory properties and physiological properties. Coffee beverages represent a significant source of antioxidants in the consumers' diet and contribute significantly to their daily intake. The aim of this research was to investigate the effect of different roasting degrees on the content of biologically active compounds and antioxidant activity in different quality classes of Arabica coffee. Samples of green Arabica coffee (Rio Minas) of two quality classes from two production batches were used for the research. Roasting was carried out at temperatures of 167, 175 and 171°C. The total phenol content (TPC), total flavonoid content (TFC), flavonol content (FC) and antioxidant activity (DPPH, ABTS) in the coffee extracts was determined. This research shows that TPC was significantly higher (P < 0.05) in green coffee compared to TPC in roasted coffee, and TPC decreases as the roasting temperature increases. TFC and FC were significantly lower (P < 0.05) in green coffee than in roasted coffee. Differences in TPC between the 1st and 2nd classes of Arabica coffee were not significant (P > 0.05), while differences in TFC were significant (P < 0.05) only for green coffee from the second production batch and differences in FC were significant (P < 0.05) for green coffee and for coffee roasted at 175°C. Roasting temperatures have different influences the antioxidant activity (DPPH, ABTS) of coffee and the highest antioxidant activity was determined in coffee roasted at 171°C. An exception was 1st class Arabica coffee roasted at 167°C (ABTS). All samples of 1st class Arabica coffee had higher antioxidant activity (DPPH, ABTS) compared to 2nd class Arabica. This research shows that the bioactive compounds content and antioxidant activity of different quality classes of Arabica coffee are dependent on the degree of roasting. TPC decreases when the roasting temperature increases, while TFC and FC also increase. These results indicate that the antioxidant activity of coffee depends on a variety of bioactive components in coffee beans. Antioxidant activity largely depends on the class of coffee. The coffee samples of 1stclass quality (maximum 8 black beans/300 g from the sample and large bean size) had higher antioxidant activity compared to samples of 2nd quality class (maximum 19 black beans/300 g in the sample and medium-sized beans).

  2. Temperature induced changes in size dependent distributions of two boreal and three Lusitanian flatfish species: A comparative study

    NASA Astrophysics Data System (ADS)

    van Hal, Ralf; van Kooten, Tobias; Rijnsdorp, Adriaan D.

    2016-01-01

    Changes in spatial distribution in several fish species have been related to recent increase in global temperature. In the North Sea, both a poleward shift and a shift to deeper water have been observed. Here, we study the underlying mechanism of these shifts in a comparative study of the changes in distribution of two boreal flatfish species (plaice Pleuronectes platessa and dab Limanda limanda) and three Lusitanian flatfish species (sole Solea solea, solenette Buglossidium luteum, and scaldfish Arnoglossus laterna) as recorded in annual bottom trawl surveys carried out in the North Sea in late summer since 1985. The distribution is analysed in relation to the bottom temperature at the time of the survey as well as to the seasonal maximum bottom temperature earlier in the year. It is shown that the boreal species plaice and dab moved to deeper water and maintained the seasonal maximum temperature that they experienced in earlier periods, while the Lusitanian species sole, solenette, and scaldfish experienced an increase in the seasonal maximum temperature that they experienced while maintaining their depth distribution. This overall response varied between length classes, reflecting a preference for higher temperature of the smaller length classes. The results lend support to the hypothesis that the fish displayed a direct response to the maximum temperature that occurred during the growth season before the time of sampling.

  3. Metabolic Depression in Cunner (Tautogolabrus adspersus) Is Influenced by Ontogeny, and Enhances Thermal Tolerance

    PubMed Central

    Nash, Gordon W.; Gamperl, A. Kurt

    2014-01-01

    To examine the effect of ontogeny on metabolic depression in the cunner (Tautogolabrus adspersus), and to understand how ontogeny and the ability to metabolically depress influence this species' upper thermal tolerance: 1) the metabolic rate of 9°C-acclimated cunner of three size classes [0.2–0.5 g, young of the year (YOY); 3–6 g, small; and 80–120 g, large (adult)] was measured during a 2°C per day decrease in temperature; and 2) the metabolic response of the same three size classes of cunner to an acute thermal challenge [2°C h−1 from 10°C until Critical Thermal Maximum, CTMax] was examined, and compared to that of the Atlantic cod (Gadus morhua). The onset-temperature for metabolic depression in cunner increased with body size, i.e. from 5°C in YOY cunner to 7°C in adults. In contrast, the extent of metabolic depression was ∼80% (Q10 = ∼15) for YOY fish, ∼65% (Q10 = ∼8) for small fish and ∼55% (Q10 = ∼5) for adults, and this resulted in the metabolic scaling exponent (b) gradually increasing from 0.84 to 0.92 between 9°C to 1°C. All size classes of cunner had significantly (approximately 60%) lower routine metabolic rates at 10°C than Atlantic cod. However, there was no species' difference in the temperature-induced maximum metabolic rate, and this resulted in factorial metabolic scope values that were more than two-fold greater for cunner, and CTMax values that were 6–9°C higher (∼21 vs. 28°C). These results: 1) show that ontogeny influences the temperature of initiation and the extent of metabolic depression in cunner, but not O2 consumption when in a hypometabolic state; and 2) suggest that the evolution of cold-induced metabolic depression in this northern wrasse species has not resulted in a trade-off with upper thermal tolerance, but instead, an enhancement of this species' metabolic plasticity. PMID:25514755

  4. Metabolic depression in cunner (Tautogolabrus adspersus) is influenced by ontogeny, and enhances thermal tolerance.

    PubMed

    Kelly, Nick I; Alzaid, Abdullah; Nash, Gordon W; Gamperl, A Kurt

    2014-01-01

    To examine the effect of ontogeny on metabolic depression in the cunner (Tautogolabrus adspersus), and to understand how ontogeny and the ability to metabolically depress influence this species' upper thermal tolerance: 1) the metabolic rate of 9°C-acclimated cunner of three size classes [0.2-0.5 g, young of the year (YOY); 3-6 g, small; and 80-120 g, large (adult)] was measured during a 2°C per day decrease in temperature; and 2) the metabolic response of the same three size classes of cunner to an acute thermal challenge [2°C h(-1) from 10°C until Critical Thermal Maximum, CTMax] was examined, and compared to that of the Atlantic cod (Gadus morhua). The onset-temperature for metabolic depression in cunner increased with body size, i.e. from 5°C in YOY cunner to 7°C in adults. In contrast, the extent of metabolic depression was ∼80% (Q10 = ∼15) for YOY fish, ∼65% (Q10 = ∼8) for small fish and ∼55% (Q10 = ∼5) for adults, and this resulted in the metabolic scaling exponent (b) gradually increasing from 0.84 to 0.92 between 9°C to 1°C. All size classes of cunner had significantly (approximately 60%) lower routine metabolic rates at 10°C than Atlantic cod. However, there was no species' difference in the temperature-induced maximum metabolic rate, and this resulted in factorial metabolic scope values that were more than two-fold greater for cunner, and CTMax values that were 6-9°C higher (∼21 vs. 28°C). These results: 1) show that ontogeny influences the temperature of initiation and the extent of metabolic depression in cunner, but not O2 consumption when in a hypometabolic state; and 2) suggest that the evolution of cold-induced metabolic depression in this northern wrasse species has not resulted in a trade-off with upper thermal tolerance, but instead, an enhancement of this species' metabolic plasticity.

  5. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Friar, James Lewis; Goldman, Terrance J.; Pérez-Mercader, J.

    In this paper, we apply the Law of Total Probability to the construction of scale-invariant probability distribution functions (pdf's), and require that probability measures be dimensionless and unitless under a continuous change of scales. If the scale-change distribution function is scale invariant then the constructed distribution will also be scale invariant. Repeated application of this construction on an arbitrary set of (normalizable) pdf's results again in scale-invariant distributions. The invariant function of this procedure is given uniquely by the reciprocal distribution, suggesting a kind of universality. Finally, we separately demonstrate that the reciprocal distribution results uniquely from requiring maximum entropymore » for size-class distributions with uniform bin sizes.« less

  6. Particle size distributions and the vertical distribution of suspended matter in the upwelling region off Oregon

    NASA Technical Reports Server (NTRS)

    Kitchen, J. C.

    1977-01-01

    Various methods of presenting and mathematically describing particle size distribution are explained and evaluated. The hyperbolic distribution is found to be the most practical but the more complex characteristic vector analysis is the most sensitive to changes in the shape of the particle size distributions. A method for determining onshore-offshore flow patterns from the distribution of particulates was presented. A numerical model of the vertical structure of two size classes of particles was developed. The results show a close similarity to the observed distributions but overestimate the particle concentration by forty percent. This was attributed to ignoring grazing by zooplankton. Sensivity analyses showed the size preference was most responsive to the maximum specific growth rates and nutrient half saturation constants. The verical structure was highly dependent on the eddy diffusivity followed closely by the growth terms.

  7. Mapping Prevalence and Incidence of Coral Disease in reef-building corals at two Natural Reserves of the Southwest Puerto Rico

    NASA Astrophysics Data System (ADS)

    Sanchez Viruet, I.; Irizarry-Soto, E.; Ruiz-Valentín, I.

    2016-02-01

    Coral diseases seems to be the main cause of coral reef decline in the Caribbean. Before the bleaching event of 2005, coral reefs in Puerto Rico were dominated by the reef-building taxa: Orbicella annularis, Porites astreoides, Montastrea cavernosa, Agaricia agaracites and Colpophyllia natans. After the event, live-coral cover significantly declined and more than 90% of the scleractinian corals in the U.S. Virgin Islands and Puerto Rico showed signals of thermal stressors. The prevalence of coral diseases in five reef-building coral (Orbicella annularis, Orbicella franksi, Orbicella faveolata, Porites porites and Pseudiploria strigosa) species was assessed by tagging, photographing, and mapping all diseased and healthy colonies within 10 permanent 40m2 band transects at each inshore and mid-shelf reefs of Belvedere and Punta Guaniquilla Natural Reserves using a random stratified sampling method. Maximum and perpendicular diameter was used to assess coral size using Coral Point Count with Excel Extension. Corals were classified into three size class populations (class I: 0-50cm, class II: 50-100cm and class III: >100 cm). Data was used to develop a GIS-based map containing coral species, size and disease presence. Preliminary results of the inshore area showed a higher disease prevalence in Belvedere natural reserve and for P. strigosa (17.1%) and O. annularis (9.3%). Frequency distribution analysis showed a dominance of O. faveolata at Punta Guaniquilla and Belvedere (127 and 88 individuals respectively). Size class I dominates the distribution of each species within the natural reserves with a higher disease prevalence. Future work include continue prevalence surveys of the outer reef shelf on both natural reserves, monitoring and GIS-based mapping of incidence and resilience through time. This study will help in the assessment of the status of the coral reef of the southwest insular platform.

  8. Factors affecting spruce establishment and recruitment near western treeline, Alaska

    NASA Astrophysics Data System (ADS)

    Miller, A. E.; Sherriff, R.; Wilson, T. L.

    2015-12-01

    Regional warming and increases in tree growth are contributing to increased productivity near the western forest margin in Alaska. The effects of warming on seedling recruitment has received little attention, in spite of forecasted forest expansion near western treeline. Here, we used stand structure and environmental data from white spruce (Picea glauca) stands (n = 95) sampled across a longitudinal gradient to explore factors influencing white spruce growth, establishment and recruitment in southwest Alaska. Using tree-ring chronologies developed from a subset of the plots (n = 30), we estimated establishment dates and basal area increment (BAI) for trees of all age classes across a range of site conditions. We used GLMs (generalized linear models) to explore the relationship between tree growth and temperature in undisturbed, low elevation sites along the gradient, using BAI averaged over the years 1975-2000. In addition, we examined the relationship between growing degree days (GDD) and seedling establishment over the previous three decades. We used total counts of live seedlings, saplings and live and dead trees, representing four cohorts, to evaluate whether geospatial, climate, and measured plot covariates predicted abundance of the different size classes. We hypothesized that the relationship between abundance and longitude would vary by size class, and that this relationship would be mediated by growing season temperature. We found that mean BAI for trees in undisturbed, low elevation sites increased with July maximum temperature, and that the slope of the relationship with temperature changed with longitude (interaction significant with 90% confidence). White spruce establishment was positively associated with longer summers and/or greater heat accumulation, as inferred from GDD. Seedling, sapling and tree abundance were also positively correlated with temperature across the study area. The response to longitude was mixed, with smaller size classes (seedlings, small saplings) most abundant at the western end of the gradient, and larger size classes (trees) most abundant to the east, suggesting a moving front of white spruce establishment near western treeline.

  9. EAS fluctuation approach to primary mass composition investigation

    NASA Technical Reports Server (NTRS)

    Stamenov, J. N.; Janminchev, V. D.

    1985-01-01

    The analysis of muon and electron fluctuation distribution shapes by statistical method of invers problem solution gives the possibility to obtain the relative contribution values of the five main primary nuclei groups. The method is model-independent for a big class of interaction models and can give good results for observation levels not too far from the development maximum and for the selection of showers with fixed sizes and zenith angles not bigger than 30 deg.

  10. Two-point method uncertainty during control and measurement of cylindrical element diameters

    NASA Astrophysics Data System (ADS)

    Glukhov, V. I.; Shalay, V. V.; Radev, H.

    2018-04-01

    The topic of the article is devoted to the urgent problem of the reliability of technical products geometric specifications measurements. The purpose of the article is to improve the quality of parts linear sizes control by the two-point measurement method. The article task is to investigate methodical extended uncertainties in measuring cylindrical element linear sizes. The investigation method is a geometric modeling of the element surfaces shape and location deviations in a rectangular coordinate system. The studies were carried out for elements of various service use, taking into account their informativeness, corresponding to the kinematic pairs classes in theoretical mechanics and the number of constrained degrees of freedom in the datum element function. Cylindrical elements with informativity of 4, 2, 1 and θ (zero) were investigated. The uncertainties estimation of in two-point measurements was made by comparing the results of of linear dimensions measurements with the functional diameters maximum and minimum of the element material. Methodical uncertainty is formed when cylindrical elements with maximum informativeness have shape deviations of the cut and the curvature types. Methodical uncertainty is formed by measuring the element average size for all types of shape deviations. The two-point measurement method cannot take into account the location deviations of a dimensional element, so its use for elements with informativeness less than the maximum creates unacceptable methodical uncertainties in measurements of the maximum, minimum and medium linear dimensions. Similar methodical uncertainties also exist in the arbitration control of the linear dimensions of the cylindrical elements by limiting two-point gauges.

  11. The linear sizes tolerances and fits system modernization

    NASA Astrophysics Data System (ADS)

    Glukhov, V. I.; Grinevich, V. A.; Shalay, V. V.

    2018-04-01

    The study is carried out on the urgent topic for technical products quality providing in the tolerancing process of the component parts. The aim of the paper is to develop alternatives for improving the system linear sizes tolerances and dimensional fits in the international standard ISO 286-1. The tasks of the work are, firstly, to classify as linear sizes the elements additionally linear coordinating sizes that determine the detail elements location and, secondly, to justify the basic deviation of the tolerance interval for the element's linear size. The geometrical modeling method of real details elements, the analytical and experimental methods are used in the research. It is shown that the linear coordinates are the dimensional basis of the elements linear sizes. To standardize the accuracy of linear coordinating sizes in all accuracy classes, it is sufficient to select in the standardized tolerance system only one tolerance interval with symmetrical deviations: Js for internal dimensional elements (holes) and js for external elements (shafts). The main deviation of this coordinating tolerance is the average zero deviation, which coincides with the nominal value of the coordinating size. Other intervals of the tolerance system are remained for normalizing the accuracy of the elements linear sizes with a fundamental change in the basic deviation of all tolerance intervals is the maximum deviation corresponding to the limit of the element material: EI is the lower tolerance for the of the internal elements (holes) sizes and es is the upper tolerance deviation for the outer elements (shafts) sizes. It is the sizes of the material maximum that are involved in the of the dimensional elements mating of the shafts and holes and determine the fits type.

  12. Spiral galaxy HI models, rotation curves and kinematic classifications

    NASA Astrophysics Data System (ADS)

    Wiegert, Theresa B. V.

    Although galaxy interactions cause dramatic changes, galaxies also continue to form stars and evolve when they are isolated. The dark matter (DM) halo may influence this evolution since it generates the rotational behaviour of galactic disks which could affect local conditions in the gas. Therefore we study neutral hydrogen kinematics of non-interacting, nearby spiral galaxies, characterising their rotation curves (RC) which probe the DM halo; delineating kinematic classes of galaxies; and investigating relations between these classes and galaxy properties such as disk size and star formation rate (SFR). To generate the RCs, we use GalAPAGOS (by J. Fiege). My role was to test and help drive the development of this software, which employs a powerful genetic algorithm, constraining 23 parameters while using the full 3D data cube as input. The RC is here simply described by a tanh-based function which adequately traces the global RC behaviour. Extensive testing on artificial galaxies show that the kinematic properties of galaxies with inclination >40 degrees, including edge-on galaxies, are found reliably. Using a hierarchical clustering algorithm on parametrised RCs from 79 galaxies culled from literature generates a preliminary scheme consisting of five classes. These are based on three parameters: maximum rotational velocity, turnover radius and outer slope of the RC. To assess the relationship between DM content and the kinematic classes, we generate mass models for 10 galaxies from the THINGS and WHISP surveys, and J. Irwin's sample. In most cases mass models using GalAPAGOS RCs were similar to those using traditional "tilted-ring'' method RCs. The kinematic classes are mainly distinguished by their rotational velocity. We confirm correlations between increasing velocity and B-magnitude, optical disk size, and find earlier type galaxies among the strong rotators. SFR also increases with maximum rotational velocity. Given our limited subsample, we cannot discern a trend of velocity with DM halo properties such as Mhalo/Mbaryon. Using this strategy on upcoming large databases should reveal relationships between the DM halo and our kinematic classification scheme. If NGC 2841, NGC 3521 and NGC 5055 are understood to have declining RC after further investigation, this cannot be explained by the usual morphology scenarios.

  13. Habitat use in irrigation channels by the golden venus chub (Hemigrammocypris rasborella) at different growth stages.

    PubMed

    Onikura, Norio; Nakajima, Jun; Kouno, Hiromi; Sugimoto, Yoshiko; Kaneto, Jun

    2009-06-01

    Ecological information on the golden venus chub (Hemigrammocypris rasborella Fowler, 1910) was collected during field surveys and used to analyze habitat use by this species at each growth stage. Surveys were conducted every month for approximately 2 years In an irrigation ditch near the Ushizu River, Kyushu Island, Japan. Based on the characteristic nuptial coloration of males, it was estimated that H. rasborella spawns between spring and summer. Size measurements of 2697 individuals indicated two size classes. The population of age class 1 decreased rapidly after the spawning period. On the basis of growth patterns, the life cycle of H. rasborella was classified into three stages: the growth stage (GS) of age class 0 fish from August to November, the no-growth stage (NGS) of age class 0 fish from December to March, and the growing and spawning stage (GSS) of age class 0 and 1 fish from April to August. Habitat use by GS, NGS, and GSS fish was analyzed with a stepwise multiple linear regression. The average number of fish was negatively correlated with the presence of a concrete revetment in the GS; positively and negatively correlated with minimum water depth and submerged plants, respectively, in the NGS; and positively correlated with maximum water temperature in the GSS. These results suggest that maintenance of the water level in the fallow season and not using concrete revetments are essential for the conservation of this species under the present conditions in Japanese rice fields.

  14. A 500 megabyte/second disk array

    NASA Technical Reports Server (NTRS)

    Ruwart, Thomas M.; Okeefe, Matthew T.

    1994-01-01

    Applications at the Army High Performance Computing Research Center's (AHPCRC) Graphic and Visualization Laboratory (GVL) at the University of Minnesota require a tremendous amount of I/O bandwidth and this appetite for data is growing. Silicon Graphics workstations are used to perform the post-processing, visualization, and animation of multi-terabyte size datasets produced by scientific simulations performed of AHPCRC supercomputers. The M.A.X. (Maximum Achievable Xfer) was designed to find the maximum achievable I/O performance of the Silicon Graphics CHALLENGE/Onyx-class machines that run these applications. Running a fully configured Onyx machine with 12-150MHz R4400 processors, 512MB of 8-way interleaved memory, 31 fast/wide SCSI-2 channel each with a Ciprico disk array controller we were able to achieve a maximum sustained transfer rate of 509.8 megabytes per second. However, after analyzing the results it became clear that the true maximum transfer rate is somewhat beyond this figure and we will need to do further testing with more disk array controllers in order to find the true maximum.

  15. Ubiquity of Benford's law and emergence of the reciprocal distribution

    DOE PAGES

    Friar, James Lewis; Goldman, Terrance J.; Pérez-Mercader, J.

    2016-04-07

    In this paper, we apply the Law of Total Probability to the construction of scale-invariant probability distribution functions (pdf's), and require that probability measures be dimensionless and unitless under a continuous change of scales. If the scale-change distribution function is scale invariant then the constructed distribution will also be scale invariant. Repeated application of this construction on an arbitrary set of (normalizable) pdf's results again in scale-invariant distributions. The invariant function of this procedure is given uniquely by the reciprocal distribution, suggesting a kind of universality. Finally, we separately demonstrate that the reciprocal distribution results uniquely from requiring maximum entropymore » for size-class distributions with uniform bin sizes.« less

  16. Class-Size Effects in Secondary School

    ERIC Educational Resources Information Center

    Krassel, Karl Fritjof; Heinesen, Eskil

    2014-01-01

    We analyze class-size effects on academic achievement in secondary school in Denmark exploiting an institutional setting where pupils cannot predict class size prior to enrollment, and where post-enrollment responses aimed at affecting realized class size are unlikely. We identify class-size effects combining a regression discontinuity design with…

  17. Jamming and percolation in random sequential adsorption of straight rigid rods on a two-dimensional triangular lattice

    NASA Astrophysics Data System (ADS)

    Perino, E. J.; Matoz-Fernandez, D. A.; Pasinetti, P. M.; Ramirez-Pastor, A. J.

    2017-07-01

    Monte Carlo simulations and finite-size scaling analysis have been performed to study the jamming and percolation behavior of linear k-mers (also known as rods or needles) on a two-dimensional triangular lattice of linear dimension L, considering an isotropic RSA process and periodic boundary conditions. Extensive numerical work has been done to extend previous studies to larger system sizes and longer k-mers, which enables the confirmation of a nonmonotonic size dependence of the percolation threshold and the estimation of a maximum value of k from which percolation would no longer occur. Finally, a complete analysis of critical exponents and universality has been done, showing that the percolation phase transition involved in the system is not affected, having the same universality class of the ordinary random percolation.

  18. Where Gibrat meets Zipf: Scale and scope of French firms

    NASA Astrophysics Data System (ADS)

    Bee, Marco; Riccaboni, Massimo; Schiavo, Stefano

    2017-09-01

    The proper characterization of the size distribution and growth of firms represents an important issue in economics and business. We use the Maximum Entropy approach to assess the plausibility of the assumption that firm size follows Lognormal or Pareto distributions, which underlies most recent works on the subject. A comprehensive dataset covering the universe of French firms allows us to draw two major conclusions. First, the Pareto hypothesis for the whole distribution should be rejected. Second, by discriminating across firms based on the number of products sold and markets served, we find that, within the class of multi-product companies active in multiple markets, the distribution converges to a Zipf's law. Conversely, Lognormal distribution is a good benchmark for small single-product firms. The size distribution of firms largely depends on firms' diversification patterns.

  19. Population trends, growth, and movement of bigmouth buffalo, Ictiobus cyprinellus, in Lake Oahe, 1963-70

    USGS Publications Warehouse

    Moen, Thomas E.

    1974-01-01

    The bigmouth buffalo, Ictiobus cyprinellus, is the most important commercial species in Lake Oahe, a reservoir in the upper Missouri River. The population was dominated by three strong year classes (1959, 1960, and 1962). Estimated population in the fall of 1964 was 540,000 fish of the combined 1959-60 year classes and 5 million of the 1962 year class (equivalent to 81 kg per hectare). Abundance declined irregularly during 1964-70. Annual landings of these two dominant groups during 1965-70 ranged from 149 to 271 metric tons. The total landings during the period amounted to about 151,800 fish of the 1959-60 year classes and 313,000 fish of the 1962 year class. Growth rate was high during the first few years of impoundment and then declined. Males and females grew at about the same rate for the first 4 yr of life, but females were longer and heavier than males at ages V-VIII. At these ages, fish of the 1962 year class were about 10% shorter and 36% lighter than those of the 1959 year class. Growth of tagged and untagged fish was similar. The number of females per male increased with age. Age at maturity increased slightly as growth rate declined. Movement of marked fish was extensive and the recapture of marked fish was directly related to size of fish, location of release, and subsequent fishing pressure; 44% were recaptured downstream from the point of release, and 38% upstream. Females showed a stronger tendency to move downstream than males. Maximum distance traveled was 380 km and maximum rate of travel was 6.4 km per day. Successful reproduction appeared to be associated with flooding of shoreline vegetation during spring and early summer. Inasmuch as little such flooding is expected in the future, annual landings of bigmouth buffalo will probably continue to decline sharply.

  20. Growth, size and age at maturity of the agile frog (Rana dalmatina) in an Iberian Peninsula population.

    PubMed

    Sarasola-Puente, Vanessa; Gosá, Alberto; Oromí, Neus; Madeira, María José; Lizana, Miguel

    2011-06-01

    The mean age of a population of agile frogs (Rana dalmatina) from the Iberian Peninsula was estimated using mark and recapture and skeletochronology. Life-history parameters, including growth rate, body length, age and size at maturity, sexual dimorphism and longevity, were studied. The regression between age and snout-vent length (SVL) was highly significant in both sexes. Males reached sexual maturity at two years of age, although sometimes they can reach it at only one year of age. The average SVL at maturity was 51.75 mm (standard error (SE)=0.71; n=45). Females reached sexual maturity at two years of age with an average SVL of 62.14 mm (SE=2.20; n=14). A subset of the female population reached sexual maturity at three years of age. Growth was rapid until sexual maturity was reached. There was an overlap of SVL between different age classes. Growth was continuous, fulfilling the conditions of Von Bertalanffy's model. The growth coefficient (K) was 0.840 in males and 0.625 in females. The maximum SVL was greater in females (73.00 mm) than in males (59.50mm). Sexual dimorphism was significantly biased towards females in all age classes. The maximum longevity observed was 6 years in females and 8 years in males. Management strategies for agile frogs should take into account factors such as these life-history characteristics. Copyright © 2011 Elsevier GmbH. All rights reserved.

  1. Accumulate repeat accumulate codes

    NASA Technical Reports Server (NTRS)

    Abbasfar, Aliazam; Divsalar, Dariush; Yao, Kung

    2004-01-01

    In this paper we propose an innovative channel coding scheme called 'Accumulate Repeat Accumulate codes' (ARA). This class of codes can be viewed as serial turbo-like codes, or as a subclass of Low Density Parity Check (LDPC) codes, thus belief propagation can be used for iterative decoding of ARA codes on a graph. The structure of encoder for this class can be viewed as precoded Repeat Accumulate (RA) code or as precoded Irregular Repeat Accumulate (IRA) code, where simply an accumulator is chosen as a precoder. Thus ARA codes have simple, and very fast encoder structure when they representing LDPC codes. Based on density evolution for LDPC codes through some examples for ARA codes, we show that for maximum variable node degree 5 a minimum bit SNR as low as 0.08 dB from channel capacity for rate 1/2 can be achieved as the block size goes to infinity. Thus based on fixed low maximum variable node degree, its threshold outperforms not only the RA and IRA codes but also the best known LDPC codes with the dame maximum node degree. Furthermore by puncturing the accumulators any desired high rate codes close to code rate 1 can be obtained with thresholds that stay close to the channel capacity thresholds uniformly. Iterative decoding simulation results are provided. The ARA codes also have projected graph or protograph representation that allows for high speed decoder implementation.

  2. VPS GRCop-84 Liner Development Efforts

    NASA Technical Reports Server (NTRS)

    Elam, Sandra K.; Holmes, Richard; McKechnie, Tim; Hickman, Robert; Pickens, Tim

    2003-01-01

    For the past several years, NASA's Marshall Space Flight Center (MSFC) has been working with Plasma Processes, Inc. (PPI) to fabricate combustion chamber liners using the Vacuum Plasma Spray (VPS) process. Multiple liners of a variety of shapes and sizes have been created. Each liner has been fabricated with GRCop-84 (a copper alloy with chromium and niobium) and a functional gradient coating (FGC) on the hot wall. While the VPS process offers versatility and a reduced fabrication schedule, the material system created with VPS allows the liners to operate at higher temperatures, with maximum blanch resistance and improved cycle life. A subscal unit (5K lbf thrust class) is being cycle tested in a LOX/Hydrogen thrust chamber assembly at MSFC. To date, over 75 hot-fire tests have been accumulated on this article. Tests include conditions normally detrimental to conventional materials, yet the VPS GRCop-84 liner has yet to show any signs of degradation. A larger chamber (15K lbf thrust class) has also been fabricated and is being prepared for hot-fire testing at MSFC near the end of 2003. Linear liners have been successfully created to further demonstrate the versatility of the process. Finally, scale up issues for the VPS process are being tackled with efforts to fabricate a full size, engine class liner. Specifically, a liner for the SSME's Main Combustion Chamber (MCC) has recently been attempted. The SSME size was chosen for convenience, since its design was readily available and its size was sufficient to tackle specific issues. Efforts to fabricate these large liners have already provided valuable lessons for using this process for engine programs. The material quality for these large units is being evaluated with destructive analysis and these results will be available by the end of 2003.

  3. Microbial utilization of nitrogen in cold core eddies: size does matter

    NASA Astrophysics Data System (ADS)

    McInnes, A.; Messer, L. F.; Laiolo, L.; Laverock, B.; Laczka, O.; Brown, M. V.; Seymour, J.; Doblin, M.

    2016-02-01

    As the base of the marine food web, and the first step in the biological carbon pump, understanding changes in microbial community composition is essential for predicting changes in the marine nitrogen (N) cycle. Climate change projections suggest that oligotrophic waters will become more stratified with a concomitant shift in microbial community composition based on changes in N supply. In regions of strong boundary currents, eddies could reduce this limitation through nutrient uplift and other forms of eddy mixing. Understanding the preference for different forms of N by microbes is essential for understanding and predicting shifts in the microbial community. This study aims to understand the utilization of different N species within different microbial size fractions as well as understand the preferred source of N to these groups across varying mesoscale and sub-mesoscale features in the East Australian Current (EAC). In June 2015 we sampled microbial communities from three depths (surface, chlorophyll-a maximum and below the mixed layer), in three mesoscale and sub-mesoscale eddy features, as well as two end-point water masses (coastal and oligotrophic EAC water). Particulate matter was analysed for stable C and N isotopes, and seawater incubations with trace amounts of 15NO3, 15NH4, 15N2, 15Urea and 13C were undertaken. All samples were size fractionated into 0.3-2.0 µm, 2.0-10 µm, and >10 µm size classes, encompassing the majority of microbes in these waters. Microbial community composition was also assessed (pigments, flow cytometry, DNA), as well as physical and chemical parameters, to better understand the drivers of carbon fixation and nitrogen utilization across a diversity of water masses and microbial size classes. We observed that small, young features have a greater abundance of larger size classes. We therefore predict that these microbes will preferentially draw down the recently pulsed NO3. Ultimately, the size and age of a feature will determine the N compound utilization and microbial community composition and as the feature grows in size and age a community succession will lead to differential more diverse N compound utilization.

  4. Class Size and Education in England Evidence Report. Research Report. DFE-RR169

    ERIC Educational Resources Information Center

    Department for Education, 2011

    2011-01-01

    This report gives an overview of the existing evidence base on class size and education in England. In particular, it considers how class sizes have changed over time; the impact of the increase in birth rate on pupil numbers and how this could affect the teacher requirement and class sizes; and the impact of class size on educational outcomes.…

  5. Influence of Distributed Dead Loads on Vehicle Position for Maximum Moment in Simply Supported Bridges

    NASA Astrophysics Data System (ADS)

    Gupta, Tanmay; Kumar, Manoj

    2017-06-01

    Usually, the design moments in the simply supported bridges are obtained as the sum of moments due to dead loads and live load where the live load moments are calculated using the rolling load concept neglecting the effect of dead loads. For the simply supported bridges, uniformly distributed dead load produces maximum moment at mid-span while the absolute maximum bending moment due to multi-axel vehicles occur under a wheel which usually do not lie at mid-span. Since, the location of absolute maximum bending moment due to multi-axel vehicle do not coincide with the location of maximum moment due to dead loads occurring at mid-span, the design moment may not be obtained by simply superimposing the effect of dead load and live load. Moreover, in case of Class-A and Class-70R wheeled vehicular live loads, which consists of several axels, the number of axels to be considered over the bridge of given span and their location is tedious to find out and needs several trials. The aim of the present study is to find the number of wheels for Class-A and Class-70R wheeled vehicles and their precise location to produce absolute maximum moment in the bridge considering the effect of dead loads and impact factor. Finally, in order to enable the designers, the design moments due to Class-70R wheeled and Class-A loading have been presented in tabular form for the spans from 10 to 50 m.

  6. Kinematic classification of non-interacting spiral galaxies

    NASA Astrophysics Data System (ADS)

    Wiegert, Theresa; English, Jayanne

    2014-01-01

    Using neutral hydrogen (HI) rotation curves of 79 galaxies, culled from the literature, as well as measured from HI data, we present a method for classifying disk galaxies by their kinematics. In order to investigate fundamental kinematic properties we concentrate on non-interacting spiral galaxies. We employ a simple parameterized form for the rotation curve in order to derive the three parameters: the maximum rotational velocity, the turnover radius and a measure of the slope of the rotation curve beyond the turnover radius. Our approach uses the statistical Hierarchical Clustering method to guide our division of the resultant 3D distribution of galaxies into five classes. Comparing the kinematic classes in this preliminary classification scheme to a number of galaxy properties, we find that our class containing galaxies with the largest rotational velocities has a mean morphological type of Sb/Sbc while the other classes tend to later types. Other trends also generally agree with those described by previous researchers. In particular we confirm correlations between increasing maximum rotational velocity and the following observed properties: increasing brightness in B-band, increasing size of the optical disk (D25) and increasing star formation rate (as derived using radio continuum data). Our analysis also suggests that lower velocities are associated with a higher ratio of the HI mass over the dynamical mass. Additionally, three galaxies exhibit a drop in rotational velocity amplitude of ≳20% after the turnover radius. However recent investigations suggest that they have interacted with minor companions which is a common cause for declining rotation curves.

  7. Mass Instruction or Higher Learning? The Impact of College Class Size on Student Retention and Graduation

    ERIC Educational Resources Information Center

    Bettinger, Eric P.; Long, Bridget Terry

    2018-01-01

    This paper measures the effects of collegiate class size on college retention and graduation. Class size is a perennial issue in research on primary and secondary schooling. Few researchers have focused on the causal impacts of collegiate class size, however. Whereas college students have greater choice of classes, selection problems and nonrandom…

  8. Multi-Positioning Mathematics Class Size: Teachers' Views

    ERIC Educational Resources Information Center

    Handal, Boris; Watson, Kevin; Maher, Marguerite

    2015-01-01

    This paper explores mathematics teachers' perceptions about class size and the impact class size has on teaching and learning in secondary mathematics classrooms. It seeks to understand teachers' views about optimal class sizes and their thoughts about the education variables that influence these views. The paper draws on questionnaire responses…

  9. Constraints on the adult-offspring size relationship in protists.

    PubMed

    Caval-Holme, Franklin; Payne, Jonathan; Skotheim, Jan M

    2013-12-01

    The relationship between adult and offspring size is an important aspect of reproductive strategy. Although this filial relationship has been extensively examined in plants and animals, we currently lack comparable data for protists, whose strategies may differ due to the distinct ecological and physiological constraints on single-celled organisms. Here, we report measurements of adult and offspring sizes in 3888 species and subspecies of foraminifera, a class of large marine protists. Foraminifera exhibit a wide range of reproductive strategies; species of similar adult size may have offspring whose sizes vary 100-fold. Yet, a robust pattern emerges. The minimum (5th percentile), median, and maximum (95th percentile) offspring sizes exhibit a consistent pattern of increase with adult size independent of environmental change and taxonomic variation over the past 400 million years. The consistency of this pattern may arise from evolutionary optimization of the offspring size-fecundity trade-off and/or from cell-biological constraints that limit the range of reproductive strategies available to single-celled organisms. When compared with plants and animals, foraminifera extend the evidence that offspring size covaries with adult size across an additional five orders of magnitude in organism size. © 2013 The Author(s). Evolution © 2013 The Society for the Study of Evolution.

  10. De-biased populations of Kuiper belt objects from the deep ecliptic survey

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Adams, E. R.; Benecchi, S. D.; Gulbis, A. A. S.

    2014-09-01

    The Deep Ecliptic Survey (DES) was a survey project that discovered hundreds of Kuiper Belt objects from 1998 to 2005. Extensive follow-up observations of these bodies has yielded 304 objects with well-determined orbits and dynamical classifications into one of several categories: Classical, Scattered, Centaur, or 16 mean-motion resonances with Neptune. The DES search fields are well documented, enabling us to calculate the probability on each frame of detecting an object with its particular orbital parameters and absolute magnitude at a randomized point in its orbit. The detection probabilities range from a maximum of 0.32 for the 3:2 resonant object 2002more » GF {sub 32} to a minimum of 1.5 × 10{sup –7} for the faint Scattered object 2001 FU {sub 185}. By grouping individual objects together by dynamical classes, we can estimate the distributions of four parameters that define each class: semimajor axis, eccentricity, inclination, and object size. The orbital element distributions (a, e, and i) were fit to the largest three classes (Classical, 3:2, and Scattered) using a maximum likelihood fit. Using the absolute magnitude (H magnitude) as a proxy for the object size, we fit a power law to the number of objects versus H magnitude for eight classes with at least five detected members (246 objects). The Classical objects are best fit with a power-law slope of α = 1.02 ± 0.01 (observed from 5 ≤ H ≤ 7.2). Six other dynamical classes (Scattered plus five resonances) have consistent magnitude distribution slopes with the Classicals, provided that the absolute number of objects is scaled. Scattered objects are somewhat more numerous than Classical objects, while there are only a quarter as many 3:2 objects as Classicals. The exception to the power law relation is the Centaurs, which are non-resonant objects with perihelia closer than Neptune and therefore brighter and detectable at smaller sizes. Centaurs were observed from 7.5 < H < 11, and that population is best fit by a power law with α = 0.42 ± 0.02. This is consistent with a knee in the H-distribution around H = 7.2 as reported elsewhere. Based on the Classical-derived magnitude distribution, the total number of objects (H ≤ 7) in each class is: Classical (2100 ± 300 objects), Scattered (2800 ± 400), 3:2 (570 ± 80), 2:1 (400 ± 50), 5:2 (270 ± 40), 7:4 (69 ± 9), 5:3 (60 ± 8). The independent estimate for the number of Centaurs in the same H range is 13 ± 5. If instead all objects are divided by inclination into 'Hot' and 'Cold' populations, following Fraser et al., we find that α{sub Hot} = 0.90 ± 0.02, while α{sub Cold} = 1.32 ± 0.02, in good agreement with that work.« less

  11. Age-specific light preferences and vertical migration patterns of a Great Lakes invasive invertebrate, Hemimysis anomala

    USGS Publications Warehouse

    Boscarino, Brent T.; Halpin, Kathleen E.; Rudstam, Lars G.; Walsh, Maureen G.; Lantry, Brian F.

    2012-01-01

    We use a combination of spectral sensitivity analyses, laboratory behavioral observations and field distributions of a vertically migrating invertebrate, Hemimysis anomala (a recent invasive species to the Laurentian Great Lakes of North America), to determine if light preference and timing of emergence has an ontogenetic component. Juvenile Hemimysis (−3.4 and 10−2.4 mylux— a Hemimysis-specific unit of brightness derived from visual pigment analyses (wavelength of maximum absorbance = 500 nm; 1 mylux ~ 159 lx). These preferred light levels are equivalent to those present during nautical twilight on the Earth's surface and were several orders of magnitude brighter than those most preferred by adults (> 4.5 mm) in the laboratory (10−6.4 to 10−7.4 mylux). Both size classes completely avoided light levels of 10−0.4 mylux and greater, which are representative of daytime light levels at the Earth's surface. Net hauls taken at ~ 20-min intervals from sunset to the end of nautical twilight on two sampling occasions on Seneca Lake, New York (sampling depth = 2 m) revealed that juveniles emerged into the water column during civil twilight. Adult Hemimysis emerged later during nautical twilight when juveniles had already reached their maximum abundance in the water column. Laboratory-derived light preferences successfully predicted the timing of emergence and time of maximal abundance of both size classes on both sampling occasions. This study is one of the first to demonstrate that Hemimysis diel vertical migration has an ontogenetic component and to report the specific light levels likely to initiate and limit vertical movements.

  12. Using What We Know: A Review of the Research on Implementing Class-Size Reduction Initiatives for State and Local Policymakers.

    ERIC Educational Resources Information Center

    Laine, Sabrina W. M., Ed.; Ward, James G., Ed.

    This book contains a collection of essays involving new research on class-size reduction. Six chapters include: (1) "Reducing Class Size in Public Schools: Cost-Benefit Issues and Implications" (John F. Witte); (2) "Making Policy Choices: Is Class-Size Reduction the Best Alternative?" (Doug Harris and David N. Plank); (3) "Smaller Classes, Lower…

  13. Do Reductions in Class Size Raise Students' Test Scores? Evidence from Population Variation in Minnesota's Elementary Schools

    ERIC Educational Resources Information Center

    Cho, Hyunkuk; Glewwe, Paul; Whitler, Melissa

    2012-01-01

    Many U.S. states and cities spend substantial funds to reduce class size, especially in elementary (primary) school. Estimating the impact of class size on learning is complicated, since children in small and large classes differ in many observed and unobserved ways. This paper uses a method of Hoxby (2000) to assess the impact of class size on…

  14. What Research Says about Small Classes and Their Effects. In Pursuit of Better Schools: What Research Says.

    ERIC Educational Resources Information Center

    Biddle, Bruce J.; Berliner, David C.

    Interest in class size is widespread today. Debates often take place about "ideal" class size. Controversial efforts to reduce class size have appeared at both the federal level and in various states around the nation. This paper reviews research on class size and discusses findings, how these findings can be explained, and policy implications.…

  15. Three-class ROC analysis--the equal error utility assumption and the optimality of three-class ROC surface using the ideal observer.

    PubMed

    He, Xin; Frey, Eric C

    2006-08-01

    Previously, we have developed a decision model for three-class receiver operating characteristic (ROC) analysis based on decision theory. The proposed decision model maximizes the expected decision utility under the assumption that incorrect decisions have equal utilities under the same hypothesis (equal error utility assumption). This assumption reduced the dimensionality of the "general" three-class ROC analysis and provided a practical figure-of-merit to evaluate the three-class task performance. However, it also limits the generality of the resulting model because the equal error utility assumption will not apply for all clinical three-class decision tasks. The goal of this study was to investigate the optimality of the proposed three-class decision model with respect to several other decision criteria. In particular, besides the maximum expected utility (MEU) criterion used in the previous study, we investigated the maximum-correctness (MC) (or minimum-error), maximum likelihood (ML), and Nyman-Pearson (N-P) criteria. We found that by making assumptions for both MEU and N-P criteria, all decision criteria lead to the previously-proposed three-class decision model. As a result, this model maximizes the expected utility under the equal error utility assumption, maximizes the probability of making correct decisions, satisfies the N-P criterion in the sense that it maximizes the sensitivity of one class given the sensitivities of the other two classes, and the resulting ROC surface contains the maximum likelihood decision operating point. While the proposed three-class ROC analysis model is not optimal in the general sense due to the use of the equal error utility assumption, the range of criteria for which it is optimal increases its applicability for evaluating and comparing a range of diagnostic systems.

  16. Fuzzy jets

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mackey, Lester; Nachman, Benjamin; Schwartzman, Ariel

    Collimated streams of particles produced in high energy physics experiments are organized using clustering algorithms to form jets . To construct jets, the experimental collaborations based at the Large Hadron Collider (LHC) primarily use agglomerative hierarchical clustering schemes known as sequential recombination. We propose a new class of algorithms for clustering jets that use infrared and collinear safe mixture models. These new algorithms, known as fuzzy jets , are clustered using maximum likelihood techniques and can dynamically determine various properties of jets like their size. We show that the fuzzy jet size adds additional information to conventional jet tagging variablesmore » in boosted topologies. Furthermore, we study the impact of pileup and show that with some slight modifications to the algorithm, fuzzy jets can be stable up to high pileup interaction multiplicities.« less

  17. Fuzzy jets

    DOE PAGES

    Mackey, Lester; Nachman, Benjamin; Schwartzman, Ariel; ...

    2016-06-01

    Collimated streams of particles produced in high energy physics experiments are organized using clustering algorithms to form jets . To construct jets, the experimental collaborations based at the Large Hadron Collider (LHC) primarily use agglomerative hierarchical clustering schemes known as sequential recombination. We propose a new class of algorithms for clustering jets that use infrared and collinear safe mixture models. These new algorithms, known as fuzzy jets , are clustered using maximum likelihood techniques and can dynamically determine various properties of jets like their size. We show that the fuzzy jet size adds additional information to conventional jet tagging variablesmore » in boosted topologies. Furthermore, we study the impact of pileup and show that with some slight modifications to the algorithm, fuzzy jets can be stable up to high pileup interaction multiplicities.« less

  18. Do Class Size Effects Differ across Grades?

    ERIC Educational Resources Information Center

    Nandrup, Anne Brink

    2016-01-01

    This paper contributes to the class size literature by analysing whether short-run class size effects are constant across grade levels in compulsory school. Results are based on administrative data on all pupils enrolled in Danish public schools. Identification is based on a government-imposed class size cap that creates exogenous variation in…

  19. The Synergy of Class Size Reduction and Classroom Quality

    ERIC Educational Resources Information Center

    Graue, Elizabeth; Rauscher, Erica; Sherfinski, Melissa

    2009-01-01

    A contextual approach to understanding class size reduction includes attention to both educational inputs and processes. Based on our study of a class size reduction program in Wisconsin we explore the following question: How do class size reduction and classroom quality interact to produce learning opportunities in early elementary classrooms? To…

  20. Online Class Size, Note Reading, Note Writing and Collaborative Discourse

    ERIC Educational Resources Information Center

    Qiu, Mingzhu; Hewitt, Jim; Brett, Clare

    2012-01-01

    Researchers have long recognized class size as affecting students' performance in face-to-face contexts. However, few studies have examined the effects of class size on exact reading and writing loads in online graduate-level courses. This mixed-methods study examined relationships among class size, note reading, note writing, and collaborative…

  1. 47 CFR 73.207 - Minimum distance separation between stations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... kW ERP and 100 meters antenna HAAT (or equivalent lower ERP and higher antenna HAAT based on a class... which have been notified internationally as Class A are limited to a maximum of 3.0 kW ERP at 100 meters... internationally as Class AA are limited to a maximum of 6.0 kW ERP at 100 meters HAAT, or the equivalent; (iii) U...

  2. Class Size Effects on Fourth-Grade Mathematics Achievement: Evidence from TIMSS 2011

    ERIC Educational Resources Information Center

    Li, Wei; Konstantopoulos, Spyros

    2016-01-01

    Class size reduction policies have been widely implemented around the world in recent years. However, findings about the effects of class size on student achievement have been mixed. This study examines class size effects on fourth-grade mathematics achievement in 14 European countries using data from TIMSS (Trends in International Mathematics and…

  3. Making Sense of Continuing and Renewed Class-Size Findings and Interest.

    ERIC Educational Resources Information Center

    Achilles, C. M.; Finn, J. D.

    In this paper, the authors examine several factors related to class size. The purpose of the presentation is to: (1) trace the evolution of class-size research; (2) briefly describe the Student Achievement Ratio (STAR) class-size experiment; (3) summarize the early and the later student outcomes of STAR participants; (4) outline the…

  4. Primary Class Size Reduction: How Policy Space, Physical Space, and Spatiality Shape What Happens in Real Schools

    ERIC Educational Resources Information Center

    Bascia, Nina; Faubert, Brenton

    2012-01-01

    This article reviews the literature base on class size reduction and proposes a new analytic framework that we believe provides practically useful explanations of how primary class size reduction works. It presents descriptions of classroom practice and grounded explanations for how class size reduction affects educational core activities by…

  5. Class Size Effects on Mathematics Achievement in Cyprus: Evidence from TIMSS

    ERIC Educational Resources Information Center

    Konstantopoulos, Spyros; Shen, Ting

    2016-01-01

    Class size reduction has been viewed as one school mechanism that can improve student achievement. Nonetheless, the literature has reported mixed findings about class size effects. We used 4th- and 8th-grade data from TIMSS 2003 and 2007 to examine the association between class size and mathematics achievement in public schools in Cyprus. We…

  6. Class-Size Policy: The STAR Experiment and Related Class-Size Studies. NCPEA Policy Brief. Volume 1, Number 2

    ERIC Educational Resources Information Center

    Achilles, Charles M.

    2012-01-01

    This brief summarizes findings on class size from over 25 years of work on the Tennessee Student Teacher Achievement Ratio (STAR) randomized, longitudinal experiment, and other Class-Size Reduction (CSR) studies throughout the United States, Australia, Hong Kong, Sweden, Great Britain, and elsewhere. The brief concludes with recommendations. The…

  7. Bulk vs. amino acid stable N isotope estimations of metabolic status and contributions of nitrogen fixation to size-fractionated zooplankton biomass in the subtropical N Atlantic

    NASA Astrophysics Data System (ADS)

    Mompeán, Carmen; Bode, Antonio; Gier, Elizabeth; McCarthy, Matthew D.

    2016-08-01

    A comparative analysis of natural abundance of stable N isotopes (δ15N) in individual amino acids and bulk organic matter of size-fractionated plankton revealed the differential impact of nitrogen fixation through the food web in a transect across the subtropical North Atlantic. All δ15N measurements showed low values in the central region, followed by the western zone, while maximum δ15N values were found in the eastern zone. These results were consistent with the prevalence of nitrogen fixation in the central and western zones, and the influence of the west Africa upwelling in the eastern zone. Use of compound-specific amino acid isotope data (CSI-AA) revealed relatively low variability in the impact of diazotrophic nitrogen within the different plankton size fractions, while δ15N of bulk organic matter showed high variability with size. Explicit CSI-AA trophic position estimates showed a small increase with mean plankton size class and varied in a relatively narrow range 1.8-2.5), with the lowest values in the central zone. High correlations between bulk plankton δ15N and individual amino acids (in particular Phe and Thr), as well as reconstructed total protein δ15N values, suggest a set of new relationships that may be important to tracing direct plankton contributions to nitrogen recycling in the ocean, including detrital organic nitrogen pools. Overall, these new results represent the most detailed investigation of CSI-AA data in plankton size classes to date, and indicated a greater importance of diazotrophic N than suggested by concurrent measurements of bulk δ15N, abundance of large nitrogen fixing organisms or nitrogen fixation rates.

  8. Morphology of the tympanic-basicranial region in Mirounga leonina (Phocidae, Carnivora), postnatal ontogeny and sexual dimorphism

    PubMed Central

    Loza, C M; Scarano, A C; Soibelzon, L H; Negrete, J; Carlini, A A

    2015-01-01

    The auditory region of pinnipeds has seldom been described. Here we describe and analyze the ontogenetic trajectory of the tympanic bulla of the southern elephant seal, Mirounga leonina (Phocidae, Mammalia). This species is extremely sexually dimorphic and highly polygynous (organized in harems). We examined 118 specimens, arranged in three age classes (CI, CII, and CIII), ranging from newborn to adults (males and females). To analyze the overall size and shape of the tympanic bulla we performed a geometric morphometric analysis including 87 skulls. Females reach definitive shape and size of the bulla at earlier ontogenetic stages than males, in agreement with their earlier involvement in reproductive activities. The internal anatomy of the tympanic region (e.g. form and extension of the paries) does not show remarkable differences between sexes or age classes. The greatest differences between age classes are related to bone thickness, resulting from the apposition of new annual layers. An examination of possible sex-related external differences among age classes shows significant shape differences between males and females in CIII. The morphology observed in neonates is conserved across all individuals from CI, which included specimens up to 1 year old. Clear morphological differences were observed between CI individuals, on one hand, and CII individuals plus CIII females on the other. During cranial development of both male and females, the glenoid cavity expands and compresses the bulla; this condition reaches its maximum expression in CIII males. CIII males showed the greatest morphological differences, with respect to both CI and CII individuals, and CIII females. PMID:25827162

  9. AFLP markers reveal high clonal diversity and extreme longevity in four key arctic-alpine species.

    PubMed

    de Witte, Lucienne C; Armbruster, Georg F J; Gielly, Ludovic; Taberlet, Pierre; Stöcklin, Jürg

    2012-03-01

    We investigated clonal diversity, genet size structure and genet longevity in populations of four arctic-alpine plants (Carex curvula, Dryas octopetala, Salix herbacea and Vaccinium uliginosum) to evaluate their persistence under past climatic oscillations and their potential resistance to future climate change. The size and number of genets were determined by an analysis of amplified fragment length polymorphisms and a standardized sampling design in several European arctic-alpine populations, where these species are dominant in the vegetation. Genet age was estimated by dividing the size by the annual horizontal size increment from in situ growth measurements. Clonal diversity was generally high but differed among species, and the frequency distribution of genet size was strongly left-skewed. The largest C. curvula genet had an estimated minimum age of c. 4100 years and a maximum age of c. 5000 years, although 84.8% of the genets in this species were <200 years old. The oldest genets of D. octopetala, S. herbacea and V. uliginosum were found to be at least 500, 450 and 1400 years old, respectively. These results indicate that individuals in the studied populations have survived pronounced climatic oscillations, including the Little Ice Age and the postindustrial warming. The presence of genets in all size classes and the dominance of presumably young individuals suggest repeated recruitment over time, a precondition for adaptation to changing environmental conditions. Together, persistence and continuous genet turnover may ensure maximum ecosystem resilience. Thus, our results indicate that long-lived clonal plants in arctic-alpine ecosystems can persist, despite considerable climatic change. © 2011 Blackwell Publishing Ltd.

  10. Spurious Latent Class Problem in the Mixed Rasch Model: A Comparison of Three Maximum Likelihood Estimation Methods under Different Ability Distributions

    ERIC Educational Resources Information Center

    Sen, Sedat

    2018-01-01

    Recent research has shown that over-extraction of latent classes can be observed in the Bayesian estimation of the mixed Rasch model when the distribution of ability is non-normal. This study examined the effect of non-normal ability distributions on the number of latent classes in the mixed Rasch model when estimated with maximum likelihood…

  11. Review of "Class Size: What Research Says and What It Means for State Policy"

    ERIC Educational Resources Information Center

    Whitmore Schanzenbach, Diane

    2011-01-01

    "Class Size: What Research Says and What It Means for State Policy" argues that increasing average class size by one student will save about 2% of total education spending with negligible impact on academic achievement. It justifies this conclusion on the basis that Class-Size Reduction (CSR) is not particularly effective and is not as…

  12. Shock spectra applications to a class of multiple degree-of-freedom structures system

    NASA Technical Reports Server (NTRS)

    Hwang, Shoi Y.

    1988-01-01

    The demand on safety performance of launching structure and equipment system from impulsive excitations necessitates a study which predicts the maximum response of the system as well as the maximum stresses in the system. A method to extract higher modes and frequencies for a class of multiple degree-of-freedom (MDOF) Structure system is proposed. And, along with the shock spectra derived from a linear oscillator model, a procedure to obtain upper bound solutions for maximum displacement and maximum stresses in the MDOF system is presented.

  13. A global analysis of traits predicting species sensitivity to habitat fragmentation

    USGS Publications Warehouse

    Keinath, Douglas; Doak, Daniel F.; Hodges, Karen E.; Prugh, Laura R.; Fagan, William F.; Sekercioglu, Cagan H.; Buchart, Stuart H. M.; Kauffman, Matthew J.

    2017-01-01

    AimElucidating patterns in species responses to habitat fragmentation is an important focus of ecology and conservation, but studies are often geographically restricted, taxonomically narrow or use indirect measures of species vulnerability. We investigated predictors of species presence after fragmentation using data from studies around the world that included all four terrestrial vertebrate classes, thus allowing direct inter-taxonomic comparison.LocationWorld-wide.MethodsWe used generalized linear mixed-effect models in an information theoretic framework to assess the factors that explained species presence in remnant habitat patches (3342 patches; 1559 species, mostly birds; and 65,695 records of patch-specific presence–absence). We developed a novel metric of fragmentation sensitivity, defined as the maximum rate of change in probability of presence with changing patch size (‘Peak Change’), to distinguish between general rarity on the landscape and sensitivity to fragmentation per se.ResultsSize of remnant habitat patches was the most important driver of species presence. Across all classes, habitat specialists, carnivores and larger species had a lower probability of presence, and those effects were substantially modified by interactions. Sensitivity to fragmentation (measured by Peak Change) was influenced primarily by habitat type and specialization, but also by fecundity, life span and body mass. Reptiles were more sensitive than other classes. Grassland species had a lower probability of presence, though sample size was relatively small, but forest and shrubland species were more sensitive.Main conclusionsHabitat relationships were more important than life-history characteristics in predicting the effects of fragmentation. Habitat specialization increased sensitivity to fragmentation and interacted with class and habitat type; forest specialists and habitat-specific reptiles were particularly sensitive to fragmentation. Our results suggest that when conservationists are faced with disturbances that could fragment habitat they should pay particular attention to specialists, particularly reptiles. Further, our results highlight that the probability of presence in fragmented landscapes and true sensitivity to fragmentation are predicted by different factors.

  14. Temperature-driven regime shifts in the dynamics of size-structured populations.

    PubMed

    Ohlberger, Jan; Edeline, Eric; Vøllestad, Leif Asbjørn; Stenseth, Nils C; Claessen, David

    2011-02-01

    Global warming impacts virtually all biota and ecosystems. Many of these impacts are mediated through direct effects of temperature on individual vital rates. Yet how this translates from the individual to the population level is still poorly understood, hampering the assessment of global warming impacts on population structure and dynamics. Here, we study the effects of temperature on intraspecific competition and cannibalism and the population dynamical consequences in a size-structured fish population. We use a physiologically structured consumer-resource model in which we explicitly model the temperature dependencies of the consumer vital rates and the resource population growth rate. Our model predicts that increased temperature decreases resource density despite higher resource growth rates, reflecting stronger intraspecific competition among consumers. At a critical temperature, the consumer population dynamics destabilize and shift from a stable equilibrium to competition-driven generation cycles that are dominated by recruits. As a consequence, maximum age decreases and the proportion of younger and smaller-sized fish increases. These model predictions support the hypothesis of decreasing mean body sizes due to increased temperatures. We conclude that in size-structured fish populations, global warming may increase competition, favor smaller size classes, and induce regime shifts that destabilize population and community dynamics.

  15. Identification of multiple leaks in pipeline: Linearized model, maximum likelihood, and super-resolution localization

    NASA Astrophysics Data System (ADS)

    Wang, Xun; Ghidaoui, Mohamed S.

    2018-07-01

    This paper considers the problem of identifying multiple leaks in a water-filled pipeline based on inverse transient wave theory. The analytical solution to this problem involves nonlinear interaction terms between the various leaks. This paper shows analytically and numerically that these nonlinear terms are of the order of the leak sizes to the power two and; thus, negligible. As a result of this simplification, a maximum likelihood (ML) scheme that identifies leak locations and leak sizes separately is formulated and tested. It is found that the ML estimation scheme is highly efficient and robust with respect to noise. In addition, the ML method is a super-resolution leak localization scheme because its resolvable leak distance (approximately 0.15λmin , where λmin is the minimum wavelength) is below the Nyquist-Shannon sampling theorem limit (0.5λmin). Moreover, the Cramér-Rao lower bound (CRLB) is derived and used to show the efficiency of the ML scheme estimates. The variance of the ML estimator approximates the CRLB proving that the ML scheme belongs to class of best unbiased estimator of leak localization methods.

  16. Simulations and Experiments of the Nonisothermal Forging Process of a Ti-6Al-4V Impeller

    NASA Astrophysics Data System (ADS)

    Prabhu, T. Ram

    2016-09-01

    In the present study, a nonisothermal precision forging process of a Ti-6Al-4V first-stage impeller for the gas turbine engine was simulated using the finite element software. The simulation results such as load requirements, damage, velocity field, stress, strain, and temperature distributions are discussed in detail. Simulations predicted the maximum load requirement of about 80 MN. The maximum temperature loss was observed at the contour surface regions. The center and contour regions are the high-strained regions in the part. To validate the model, forging experiments mimicking simulations were performed in the α + β phases region (930 °C). The selected locations of the part were characterized for tensile properties at 27 and 200 °C, hardness, microstructure, grain size, and the amount of primary α phase based on the strain distribution results. The soundness of the forged part was verified using fluorescent penetrant test (Mil Std 2175 Grade A) and ultrasonic test (AMS 2630 class A1). From the experimental results, it was found that the variations in the hardness, tensile properties at room, and elevated temperature are not significant. The microstructure, grain size, and primary α phase content are nearly same.

  17. Chiefs' Pocket Guide to Class Size: A Research Synthesis to Inform State Class Size Policies

    ERIC Educational Resources Information Center

    Council of Chief State School Officers, 2012

    2012-01-01

    Few questions in public education discourse benefit as much from research-based evidence as the question of class size--the pursuit of the ideal number of students that should be co-located for any particular period of instruction. But for policymakers, research on class size can be an embarrassment of riches, and much of the research appears to…

  18. Effects of Variations in Forebody and Afterbody Dead Rise on the Resistance and Spray Characteristics of the 22ADR Class VPB Airplane: Langley Tank Model 207, TED No. NACA 2361

    NASA Technical Reports Server (NTRS)

    Clement, Eugene P.; Daniels, Charles J.

    1947-01-01

    An investigation was made to determine the effects of changes in the amount and distribution of forebody and afterbody dead rise on the hydrodynamic resistance and spray characteristics of a 1/11-size model of the Bureau of Aeronautics design No. 22ADR class VPB airplane. The variations in dead rise within the range investigated had no significant effects on resistance or trim, free to trim, or on resistance or trimming moment, fixed in trim. The coordinates of the peaks of the bow-spray blisters, with reference to the model, were measured at low speeds, and it was found that the model with the low dead rise at the bow had the lowest blisters. The changes in position of the maximum dead rise of the afterbody had no effect on the bow-spray blister.

  19. Does Class Size Make a Difference?

    ERIC Educational Resources Information Center

    Glass, Gene V.; Down, A. Graham

    1979-01-01

    Argues that study findings indicate that lowered class size increases student achievement and improves school attitudes. Counter argument indicates there is little educational payoff and great monetary expense in small reductions in class size. (RH)

  20. Public School Education: The Case for Reduced Class Size. Why the Present Class Size is Not Working and What Can We Do about It?

    ERIC Educational Resources Information Center

    Graham, Evol

    2009-01-01

    By reducing class size we will close the achievement gap in public school education, caused by prior neglect especially since the civil rights era of the sixties. Additional, highly qualified and specialized teachers will more effectively manage a smaller class size and serve more individual student needs in the crucial early grades, where a solid…

  1. Taphonomic Analysis of Rodentia and Lagomorpha Bone Gnawing Based Upon Incisor Size.

    PubMed

    Pokines, James T; Sussman, Rachel; Gough, Megan; Ralston, Claira; McLeod, Elizabeth; Brun, Karen; Kearns, Aisling; Moore, Tara L

    2017-01-01

    Rodent and lagomorph species have a worldwide distribution and have the potential to alter remains from forensic cases by gnawing soft tissue and bones and through dispersal. The present research compiled metric data on the incisors widths of all rodent and lagomorph species whose ranges include Massachusetts, U.S.A., to compare their sizes to gnawing damage found on 17 cases of human remains from the Office of the Chief Medical Examiner, Boston, MA. Data on gnawing maximum striation widths also were collected from live laboratory, zoo, and wild specimens. Gnawing damage on the forensic cases could be attributed only to a particular size class of rodent or lagomorph, and identification to a particular species based on gnawing damage alone may be possible only in relatively rare cases. Multiple species examined here have broad distribution ranges, so their taphonomic alterations may impact bones from forensic cases throughout large portions of North America. © 2016 American Academy of Forensic Sciences.

  2. Beyond eruptive scenarios: assessing tephra fallout hazard from Neapolitan volcanoes.

    PubMed

    Sandri, Laura; Costa, Antonio; Selva, Jacopo; Tonini, Roberto; Macedonio, Giovanni; Folch, Arnau; Sulpizio, Roberto

    2016-04-12

    Assessment of volcanic hazards is necessary for risk mitigation. Typically, hazard assessment is based on one or a few, subjectively chosen representative eruptive scenarios, which use a specific combination of eruptive sizes and intensities to represent a particular size class of eruption. While such eruptive scenarios use a range of representative members to capture a range of eruptive sizes and intensities in order to reflect a wider size class, a scenario approach neglects to account for the intrinsic variability of volcanic eruptions, and implicitly assumes that inter-class size variability (i.e. size difference between different eruptive size classes) dominates over intra-class size variability (i.e. size difference within an eruptive size class), the latter of which is treated as negligible. So far, no quantitative study has been undertaken to verify such an assumption. Here, we adopt a novel Probabilistic Volcanic Hazard Analysis (PVHA) strategy, which accounts for intrinsic eruptive variabilities, to quantify the tephra fallout hazard in the Campania area. We compare the results of the new probabilistic approach with the classical scenario approach. The results allow for determining whether a simplified scenario approach can be considered valid, and for quantifying the bias which arises when full variability is not accounted for.

  3. Summary of an Analysis of Pupil-Teacher Ratio and Class Size: Differences That Make a Difference and Its Implications on Staffing for Class-Size Reduction.

    ERIC Educational Resources Information Center

    Sharp, Mark A.

    The purpose of this paper was to share findings from an earlier study and to provide a framework for administrators to use in the implementation of class-size reduction (CSR) in their buildings. The study examined actual and average class size (CS), pupil-teacher ratios (PTR), and their differences. A primary goal was to clarify the ramifications…

  4. School Class Size: Research and Policy

    ERIC Educational Resources Information Center

    Glass, Gene V.; And Others

    This book synthesizes research evidence to demonstrate that 1) class size is strongly related to pupil achievement; 2) smaller classes are more conducive to improved pupil performance than larger classes; 3) smaller classes provide more opportunities to adapt learning programs to individual needs; 4) pupils in smaller classes have more interest in…

  5. Class Size and Student Diversity: Two Sides of the Same Coin. Teacher Voice

    ERIC Educational Resources Information Center

    Froese-Germain, Bernie; Riel, Rick; McGahey, Bob

    2012-01-01

    Among Canadian teacher unions, discussions of class size are increasingly being informed by the importance of considering the diversity of student needs within the classroom (often referred to as class composition). For teachers, both class size and diversity matter. Teachers consistently adapt their teaching to address the individual needs of the…

  6. Class Size Reduction: Implementation and Solutions.

    ERIC Educational Resources Information Center

    Krieger, Jean

    This is a report of a study designed to discover the nature of interactions between teachers and students in regular-size classes (25 or more students) and small-size classes (fewer than 18 students). It also describes the efforts of one public school to maintain smaller classes. A review of the literature and observations of 11 primary classrooms…

  7. Additional Evidence on the Relationship between Class Size and Student Performance

    ERIC Educational Resources Information Center

    Arias, J. J.; Walker, Douglas M.

    2004-01-01

    Much of the economic education literature suggests that the principles of economics class size does not significantly affect student performance. However, study methods have varied in terms of the aggregation level (student or class), the measure of performance (TUCE or course letter grade), and the class size measure (e.g., students who completed…

  8. ALMA Observations of Polarization from Dust Scattering in the IM Lup Protoplanetary Disk

    NASA Astrophysics Data System (ADS)

    Hull, Charles L. H.; Yang, Haifeng; Li, Zhi-Yun; Kataoka, Akimasa; Stephens, Ian W.; Andrews, Sean; Bai, Xuening; Cleeves, L. Ilsedore; Hughes, A. Meredith; Looney, Leslie; Pérez, Laura M.; Wilner, David

    2018-06-01

    We present 870 μm ALMA observations of polarized dust emission toward the Class II protoplanetary disk IM Lup. We find that the orientation of the polarized emission is along the minor axis of the disk, and that the value of the polarization fraction increases steadily toward the center of the disk, reaching a peak value of ∼1.1%. All of these characteristics are consistent with models of self-scattering of submillimeter-wave emission from an optically thin inclined disk. The distribution of the polarization position angles across the disk reveals that, while the average orientation is along the minor axis, the polarization orientations show a significant spread in angles; this can also be explained by models of pure scattering. We compare the polarization with that of the Class I/II source HL Tau. A comparison of cuts of the polarization fraction across the major and minor axes of both sources reveals that IM Lup has a substantially higher polarization fraction than HL Tau toward the center of the disk. This enhanced polarization fraction could be due a number of factors, including higher optical depth in HL Tau, or scattering by larger dust grains in the more evolved IM Lup disk. However, models yield similar maximum grain sizes for both HL Tau (72 μm) and IM Lup (61 μm, this work). This reveals continued tension between grain-size estimates from scattering models and from models of the dust emission spectrum, which find that the bulk of the (unpolarized) emission in disks is most likely due to millimeter-sized (or even centimeter-sized) grains.

  9. A general methodology for maximum likelihood inference from band-recovery data

    USGS Publications Warehouse

    Conroy, M.J.; Williams, B.K.

    1984-01-01

    A numerical procedure is described for obtaining maximum likelihood estimates and associated maximum likelihood inference from band- recovery data. The method is used to illustrate previously developed one-age-class band-recovery models, and is extended to new models, including the analysis with a covariate for survival rates and variable-time-period recovery models. Extensions to R-age-class band- recovery, mark-recapture models, and twice-yearly marking are discussed. A FORTRAN program provides computations for these models.

  10. Estimating the Richness of a Population When the Maximum Number of Classes Is Fixed: A Nonparametric Solution to an Archaeological Problem

    PubMed Central

    Eren, Metin I.; Chao, Anne; Hwang, Wen-Han; Colwell, Robert K.

    2012-01-01

    Background Estimating assemblage species or class richness from samples remains a challenging, but essential, goal. Though a variety of statistical tools for estimating species or class richness have been developed, they are all singly-bounded: assuming only a lower bound of species or classes. Nevertheless there are numerous situations, particularly in the cultural realm, where the maximum number of classes is fixed. For this reason, a new method is needed to estimate richness when both upper and lower bounds are known. Methodology/Principal Findings Here, we introduce a new method for estimating class richness: doubly-bounded confidence intervals (both lower and upper bounds are known). We specifically illustrate our new method using the Chao1 estimator, rarefaction, and extrapolation, although any estimator of asymptotic richness can be used in our method. Using a case study of Clovis stone tools from the North American Lower Great Lakes region, we demonstrate that singly-bounded richness estimators can yield confidence intervals with upper bound estimates larger than the possible maximum number of classes, while our new method provides estimates that make empirical sense. Conclusions/Significance Application of the new method for constructing doubly-bound richness estimates of Clovis stone tools permitted conclusions to be drawn that were not otherwise possible with singly-bounded richness estimates, namely, that Lower Great Lakes Clovis Paleoindians utilized a settlement pattern that was probably more logistical in nature than residential. However, our new method is not limited to archaeological applications. It can be applied to any set of data for which there is a fixed maximum number of classes, whether that be site occupancy models, commercial products (e.g. athletic shoes), or census information (e.g. nationality, religion, age, race). PMID:22666316

  11. Estimation After a Group Sequential Trial.

    PubMed

    Milanzi, Elasma; Molenberghs, Geert; Alonso, Ariel; Kenward, Michael G; Tsiatis, Anastasios A; Davidian, Marie; Verbeke, Geert

    2015-10-01

    Group sequential trials are one important instance of studies for which the sample size is not fixed a priori but rather takes one of a finite set of pre-specified values, dependent on the observed data. Much work has been devoted to the inferential consequences of this design feature. Molenberghs et al (2012) and Milanzi et al (2012) reviewed and extended the existing literature, focusing on a collection of seemingly disparate, but related, settings, namely completely random sample sizes, group sequential studies with deterministic and random stopping rules, incomplete data, and random cluster sizes. They showed that the ordinary sample average is a viable option for estimation following a group sequential trial, for a wide class of stopping rules and for random outcomes with a distribution in the exponential family. Their results are somewhat surprising in the sense that the sample average is not optimal, and further, there does not exist an optimal, or even, unbiased linear estimator. However, the sample average is asymptotically unbiased, both conditionally upon the observed sample size as well as marginalized over it. By exploiting ignorability they showed that the sample average is the conventional maximum likelihood estimator. They also showed that a conditional maximum likelihood estimator is finite sample unbiased, but is less efficient than the sample average and has the larger mean squared error. Asymptotically, the sample average and the conditional maximum likelihood estimator are equivalent. This previous work is restricted, however, to the situation in which the the random sample size can take only two values, N = n or N = 2 n . In this paper, we consider the more practically useful setting of sample sizes in a the finite set { n 1 , n 2 , …, n L }. It is shown that the sample average is then a justifiable estimator , in the sense that it follows from joint likelihood estimation, and it is consistent and asymptotically unbiased. We also show why simulations can give the false impression of bias in the sample average when considered conditional upon the sample size. The consequence is that no corrections need to be made to estimators following sequential trials. When small-sample bias is of concern, the conditional likelihood estimator provides a relatively straightforward modification to the sample average. Finally, it is shown that classical likelihood-based standard errors and confidence intervals can be applied, obviating the need for technical corrections.

  12. Class Size Effects on Student Achievement: Heterogeneity across Abilities and Fields

    ERIC Educational Resources Information Center

    De Paola, Maria; Ponzo, Michela; Scoppa, Vincenzo

    2013-01-01

    In this paper, we analyze class size effects on college students exploiting data from a project offering special remedial courses in mathematics and language skills to freshmen enrolled at an Italian medium-sized public university. To estimate the effects of class size, we exploit the fact that students and teachers are virtually randomly assigned…

  13. Meta-Analysis of Research on the Relationship of Class-Size and Achievement. The Class Size and Instruction Project.

    ERIC Educational Resources Information Center

    Glass, Gene V.; Smith, Mary Lee

    The first in a series of reports by the Far West Laboratory for Educational Research and Development, this report demonstrates the positive relationship between reduced class size and pupil achievement. The researchers collected about 80 studies that yielded over 700 comparisons of the achievement of smaller and larger classes. The results showed…

  14. Beyond eruptive scenarios: assessing tephra fallout hazard from Neapolitan volcanoes

    PubMed Central

    Sandri, Laura; Costa, Antonio; Selva, Jacopo; Tonini, Roberto; Macedonio, Giovanni; Folch, Arnau; Sulpizio, Roberto

    2016-01-01

    Assessment of volcanic hazards is necessary for risk mitigation. Typically, hazard assessment is based on one or a few, subjectively chosen representative eruptive scenarios, which use a specific combination of eruptive sizes and intensities to represent a particular size class of eruption. While such eruptive scenarios use a range of representative members to capture a range of eruptive sizes and intensities in order to reflect a wider size class, a scenario approach neglects to account for the intrinsic variability of volcanic eruptions, and implicitly assumes that inter-class size variability (i.e. size difference between different eruptive size classes) dominates over intra-class size variability (i.e. size difference within an eruptive size class), the latter of which is treated as negligible. So far, no quantitative study has been undertaken to verify such an assumption. Here, we adopt a novel Probabilistic Volcanic Hazard Analysis (PVHA) strategy, which accounts for intrinsic eruptive variabilities, to quantify the tephra fallout hazard in the Campania area. We compare the results of the new probabilistic approach with the classical scenario approach. The results allow for determining whether a simplified scenario approach can be considered valid, and for quantifying the bias which arises when full variability is not accounted for. PMID:27067389

  15. Small Class Size and Its Effects.

    ERIC Educational Resources Information Center

    Biddle, Bruce J.; Berliner, David C.

    2002-01-01

    Describes several prominent early grades small-class-size projects and their effects on student achievement: Indiana's Project Prime Time, Tennessee's Project STAR (Student/Teacher Achievement Ratio), Wisconsin's SAGE (Student Achievement Guarantee in Education) Program, and the California class-size-reduction program. Lists several conclusions,…

  16. Optimizing the maximum reported cluster size in the spatial scan statistic for ordinal data.

    PubMed

    Kim, Sehwi; Jung, Inkyung

    2017-01-01

    The spatial scan statistic is an important tool for spatial cluster detection. There have been numerous studies on scanning window shapes. However, little research has been done on the maximum scanning window size or maximum reported cluster size. Recently, Han et al. proposed to use the Gini coefficient to optimize the maximum reported cluster size. However, the method has been developed and evaluated only for the Poisson model. We adopt the Gini coefficient to be applicable to the spatial scan statistic for ordinal data to determine the optimal maximum reported cluster size. Through a simulation study and application to a real data example, we evaluate the performance of the proposed approach. With some sophisticated modification, the Gini coefficient can be effectively employed for the ordinal model. The Gini coefficient most often picked the optimal maximum reported cluster sizes that were the same as or smaller than the true cluster sizes with very high accuracy. It seems that we can obtain a more refined collection of clusters by using the Gini coefficient. The Gini coefficient developed specifically for the ordinal model can be useful for optimizing the maximum reported cluster size for ordinal data and helpful for properly and informatively discovering cluster patterns.

  17. Optimizing the maximum reported cluster size in the spatial scan statistic for ordinal data

    PubMed Central

    Kim, Sehwi

    2017-01-01

    The spatial scan statistic is an important tool for spatial cluster detection. There have been numerous studies on scanning window shapes. However, little research has been done on the maximum scanning window size or maximum reported cluster size. Recently, Han et al. proposed to use the Gini coefficient to optimize the maximum reported cluster size. However, the method has been developed and evaluated only for the Poisson model. We adopt the Gini coefficient to be applicable to the spatial scan statistic for ordinal data to determine the optimal maximum reported cluster size. Through a simulation study and application to a real data example, we evaluate the performance of the proposed approach. With some sophisticated modification, the Gini coefficient can be effectively employed for the ordinal model. The Gini coefficient most often picked the optimal maximum reported cluster sizes that were the same as or smaller than the true cluster sizes with very high accuracy. It seems that we can obtain a more refined collection of clusters by using the Gini coefficient. The Gini coefficient developed specifically for the ordinal model can be useful for optimizing the maximum reported cluster size for ordinal data and helpful for properly and informatively discovering cluster patterns. PMID:28753674

  18. Comparing methods to estimate Reineke’s maximum size-density relationship species boundary line slope

    Treesearch

    Curtis L. VanderSchaaf; Harold E. Burkhart

    2010-01-01

    Maximum size-density relationships (MSDR) provide natural resource managers useful information about the relationship between tree density and average tree size. Obtaining a valid estimate of how maximum tree density changes as average tree size changes is necessary to accurately describe these relationships. This paper examines three methods to estimate the slope of...

  19. Three-dimensional analysis of cavity wall deformation after composite restoration of masticatory teeth.

    PubMed

    Manchorova-Veleva, Neshka A

    2011-01-01

    The aim of the present work was to study the size of cavity wall deformation in eight class I and II defects after composite restoration. 1. Creating a geometric model - data on the size of the left maxillary second premolar were obtained from a routine craniofacial scanning of a 20-year-old patient with a 2,5 Dental CT scanner (General Electric), with high resolution and 0.625mm-thin slices. The contour of each of the 33 cross-sections of tooth 25 was delineated using graphics software (CorelDraw 7.0) and transferred to a specialized product for engineering design (SolidWorks Office Premium 2010, SolidWorks Corp. USA). The pulp cavity and periodontal ligament were created in the same manner and were integrated in the premolar body; 2. Generation of a finite element method - the geometric model was exported to specialized software for analysis by the finite element method - COSMOSWorks 2010, which automatically builds a 3D finite elements mesh. Based on the generated model, eight additional models of class I and II cavities with different geometries, adhesive layer and nanofilled composite restorations were constructed. The polymerization shrinkage was modelled by thermal deformation, with a negative temperature difference (cooling), corresponding to the actual volume shrinkage of the composite materials by 2.1%. In models A and B, the maximum cavity wall displacement was small - 0.014 mm and 0.015 mm, respectively. In models Al, B1, C1 and C, the displacement was at the expense of large deformation of the dental tissues. The maximum cavity wall displacements were 0.020 mm, 0.026 mm, 0.020 mm, 0.035 mm, respectively. The least cavity wall displacement was in models A2 and B2 with 0.008 mm and 0.017 mm, respectively. The least displacement resulting from cavity wall deformation is found in patient-friendly class I and II preparations. Preservation of the dental tissues reduces the risk of mechanical pressure on the dentinal lymph and the likelihood of post-operative sensitivity.

  20. Class Size.

    ERIC Educational Resources Information Center

    Ellis, Thomas I.

    1985-01-01

    After a brief introduction identifying current issues and trends in research on class size, this brochure reviews five recent studies bearing on the relationship of class size to educational effectiveness. Part 1 is a review of two interrelated and highly controversial "meta-analyses" or statistical integrations of research findings on…

  1. Modelling CLPX IOP3 Radiometric Data by Means of the Dense Media Theory: Preliminary Results for the LSOS Test Site

    NASA Technical Reports Server (NTRS)

    Tedesco, Marco; Kim, Edward J.; Cline, Don; Graf, Tobias; Koike, Toshio; Armstrong, Richard; Brodzik, Mary Jo; Hardy, Janet

    2003-01-01

    The capabilities of the Dense Media Radiative Transfer model using the Quasi Crystalline Approximation with Coherent Potential (QCA-CP) to reproduce measured radiometric data were tested using the University of Tokyo Ground Based Microwave Radiometer (GBMR-7) during the third Intensive Observation Period (IOP3) of the NASA Cold-land Processes Field Experiment (CLPX). The data were collected at the Local-Scale Observation Site (LSOS), a 0.8-ha study site consisting of two open meadows separated by trees. Intensive measurements were also made of snow depth and temperature, density, and grain size profiles. A DMRT model is needed to describe radiative transfer in a medium such as snow because the assumption of independent scattering used in classical radiative transfer theory (CRT) is not valid. Validation of the DMRT approach requires a relationship between measured snow grain size and the DMRT approximation of snow grain radius as spherical particles with a mean radius of the log-normal particle-size distribution. This relationship is very important for a better understanding of snow modelling and for practical applications. DMRT simulations were compared with observations of microwave brightnesses at 18.7, 36.5 and 89-GHz (V and H polarizations) collected on February-1 9-25, 2003. Observation angles ranged from 30\\deg to 70\\deg. Model inputs included measured snow parameters except mean grain size. The average snow temperature, fractional volume and depth were held constant, together with the ice and soil permittivities. The minimum and maximum measured mean grain sizes were used to test the capabilities of the DMRT to reproduce the brightnesses as upper and lower limits. The sensitivity to the largest and smallest measured grain size in the three classes of minimum, medium and maximum observed grain sizes was also investigated. DMRT particle sizes yielding a best-fit to the experimental data for each date were computed. Results show that the measured brightnesses fall within the range of simulated brightnesses using the smallest and largest measured grain size values. The DMRT best-fit radii are comparable to the average radii for the medium observed grain sizes.

  2. Class Size Reduction in California: Summary of the 1998-99 Evaluation Findings.

    ERIC Educational Resources Information Center

    Stecher, Brian M.; Bohrnstedt, George W.

    This report discusses the results of the third year--1998-99--of California's Class Size Reduction (CSR) program. Assessments of the program show that CSR was almost fully implemented by 1998-99, with over 92 percent of students in K-3 in classes of 20 or fewer students. Those K-3 classes that had not been reduced in size were concentrated in…

  3. An Examination of Teachers' Perceptions and Practice when Teaching Large and Reduced-Size Classes: Do Teachers Really Teach Them in the Same Way?

    ERIC Educational Resources Information Center

    Harfitt, Gary James

    2012-01-01

    Class size research suggests that teachers do not vary their teaching strategies when moving from large to smaller classes. This study draws on interviews and classroom observations of three experienced English language teachers working with large and reduced-size classes in Hong Kong secondary schools. Findings from the study point to subtle…

  4. Focus on California's Class-Size Reduction: Smaller Classes Aim To Launch Early Literacy.

    ERIC Educational Resources Information Center

    McRobbie, Joan

    Smaller class sizes in California were viewed as a way to improve K-3 education, especially in the area of literacy. The urgency to act prompted state leaders to adopt class-size reduction (CSR) without knowing for sure that it would work and without establishing a formal procedure for evaluating the program. This report looks at past research on…

  5. The Class Size Policy Debate. Working Paper No. 121.

    ERIC Educational Resources Information Center

    Krueger, Alan B.; Hanushek, Eric A.

    These papers examine research on the impact of class size on student achievement. After an "Introduction," (Richard Rothstein), Part 1, "Understanding the Magnitude and Effect of Class Size on Student Achievement" (Alan B. Krueger), presents a reanalysis of Hanushek's 1997 literature review, criticizing Hanushek's vote-counting…

  6. Significance of microhabitat heterogeneity in the spatial pattern and size-class structure of Anastatica hierochuntica L.

    NASA Astrophysics Data System (ADS)

    Hegazy, Ahmad K.; Kabiel, Hanan F.

    2007-05-01

    Anastatica hierochuntica L. (Brassicaceae) is a desert monocarpic annual species characterized by a topochory/ombrohydrochory type of seed dispersal. The hygrochastic nature of the dry skeletons (dead individuals) permits controlling seed dispersal by rain events. The amount of dispersed seeds is proportional to the intensity of rainfall. When light showers occur, seeds are released and remain in the site. Seeds dispersed in the vicinity of the mother or source plant (primary type of seed dispersal) resulted in clumped pattern and complicated interrelationships among size-classes of the population. Following heavy rainfall, most seeds are released and transported into small patches and shallow depressions which collect runoff water. The dead A. hierochuntica skeletons demonstrate site-dependent size-class structure, spatial pattern and spatial interrelationships in different microhabitats. Four microhabitat types have been sampled: runnels, patches and simple and compound depressions in two sites (gravel and sand). Ripley's K-function was used to analyze the spatial pattern in populations of A. hierochuntica skeletons in the study microhabitats. Clumped patterns were observed in nearly all of the study microhabitats. Populations of A. hierochuntica in the sand site were more productive than in the gravel site and usually had more individuals in the larger size-classes. In the compound-depression microhabitat, the degree of clumping decreased from the core zone to the intermediate zone then shifted into overdispersed pattern in the outer zone. At the within size-class level, the clumped pattern dominated in small size classes but shifted into random and overdispersed patterns in the larger size classes. Aggregation between small and large size-classes was not well-defined but large individuals were found closer to the smaller individuals than to those of their own class. In relation to the phytomass and the size-class structure, the outer zone of the simple depression and the outer and intermediate zones of the compound depression microhabitats were the most productive sites.

  7. Geometric k-nearest neighbor estimation of entropy and mutual information

    NASA Astrophysics Data System (ADS)

    Lord, Warren M.; Sun, Jie; Bollt, Erik M.

    2018-03-01

    Nonparametric estimation of mutual information is used in a wide range of scientific problems to quantify dependence between variables. The k-nearest neighbor (knn) methods are consistent, and therefore expected to work well for a large sample size. These methods use geometrically regular local volume elements. This practice allows maximum localization of the volume elements, but can also induce a bias due to a poor description of the local geometry of the underlying probability measure. We introduce a new class of knn estimators that we call geometric knn estimators (g-knn), which use more complex local volume elements to better model the local geometry of the probability measures. As an example of this class of estimators, we develop a g-knn estimator of entropy and mutual information based on elliptical volume elements, capturing the local stretching and compression common to a wide range of dynamical system attractors. A series of numerical examples in which the thickness of the underlying distribution and the sample sizes are varied suggest that local geometry is a source of problems for knn methods such as the Kraskov-Stögbauer-Grassberger estimator when local geometric effects cannot be removed by global preprocessing of the data. The g-knn method performs well despite the manipulation of the local geometry. In addition, the examples suggest that the g-knn estimators can be of particular relevance to applications in which the system is large, but the data size is limited.

  8. The Class Size Debate.

    ERIC Educational Resources Information Center

    Mishel, Lawrence, Ed.; Rothstein, Richard, Ed.

    This collection of papers debates the merits of smaller class sizes and research methods used to evaluate the efficacy of this education reform measure. Four chapters focus on (1) "Understanding the Magnitude and Effect of Class Size on Student Achievement" (Alan B. Krueger), which discusses expenditures per student and economic criterion; (2)…

  9. Researcher Perspectives on Class Size Reduction

    ERIC Educational Resources Information Center

    Graue, Elizabeth; Rauscher, Erica

    2009-01-01

    This article applies to class size research Grant and Graue's (1999) position that reviews of research represent conversations in the academic community. By extending our understanding of the class size reduction conversation beyond published literature to the perspectives of researchers who have studied the topic, we create a review that includes…

  10. 76 FR 59116 - Procurement List; Additions

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-23

    ... NSN: AF110--Shirt, Class A/Primary Duty, USAF, Men's, Long Sleeve, Dark Navy Blue, Numerous Sizes. NSN: AF111--Shirt, Class A/Primary Duty, USAF, Women's, Long Sleeve, Dark Navy Blue, Numerous Sizes. NSN: AF120--Shirt, Class A/Primary Duty, USAF, Men's, Short Sleeve, Dark Navy Blue, Numerous Sizes. NSN...

  11. Compilation of Class Size Findings: Grade Level, School, and District.

    ERIC Educational Resources Information Center

    Miller-Whitehead, Marie

    This study provides an overview of class size research, examples of various class size and pupil-teacher-ratio (PTR) configurations commonly used by practitioners, and the most recent findings of scientifically controlled experimental Tennessee STAR studies. The learning environment is hierarchical in nature, with student-level data influenced by…

  12. The Opportunity Cost of Smaller Classes: A State-By-State Spending Analysis. Schools in Crisis: Making Ends Meet

    ERIC Educational Resources Information Center

    Roza, Marguerite; Ouijdani, Monica

    2012-01-01

    Two seemingly different threads are in play on the issue of class size. The first is manifested in media reports that tell readers that class sizes are rising to concerning levels. The second thread appears in the work of some researchers and education leaders and suggests that repurposing class-size reduction funds to pay for other reforms may…

  13. Class Size, Academic Achievement and Public Policy.

    ERIC Educational Resources Information Center

    Ziegler, Suzanne

    1997-01-01

    This report addresses some of the concerns surrounding smaller classes and looks at whether reduced class sizes result in higher achievement levels, and concludes that it in fact does increase student achievement, so long as classes do not exceed 17 students. But many critics question whether the high cost of reducing classes to 17 or fewer…

  14. [Nitrogen Fraction Distributions and Impacts on Soil Nitrogen Mineralization in Different Vegetation Restorations of Karst Rocky Desertification].

    PubMed

    Hu, Ning; Ma, Zhi-min; Lan, Jia-cheng; Wu, Yu-chun; Chen, Gao-qi; Fu, Wa-li; Wen, Zhi-lin; Wang, Wen-jing

    2015-09-01

    In order to illuminate the impact on soil nitrogen accumulation and supply in karst rocky desertification area, the distribution characteristics of soil nitrogen pool for each class of soil aggregates and the relationship between aggregates nitrogen pool and soil nitrogen mineralization were analyzed in this study. The results showed that the content of total nitrogen, light fraction nitrogen, available nitrogen and mineral nitrogen in soil aggregates had an increasing tendency along with the descending of aggregate-size, and the highest content was occurred in < 0. 25 mm. The content of nitrogen fractions for all aggregate-classes followed in the order of abandoned land < grass land < brush land < brush-arbor land < arbor land in different sample plots. Artificial forest lands had more effects on the improvement of the soil nitrogen than honeysuckle land. In this study it also showed the nitrogen stockpiling quantity of each aggregate-size class was differed in all aggregate-size classes, in which the content of nitrogen fraction in 5-10 mm and 2-5 mm classes of soil aggregate-size were the highest. And it meant that soil nutrient mainly was stored in large size aggregates. Large size aggregates were significant to the storage of soil nutrient. For each class of soil aggregate-size, the contribution of the nitrogen stockpiling quantity of 0. 25-1 mm class to soil net nitrogen mineralization quantity was the biggest, and following >5mm and 2-5 mm classes, and the others were the smallest. With the positive vegetation succession, the weight percentage of > 5 mm aggregate-size classes was improved and the nitrogen storage of macro-aggregates also was increased. Accordingly, the capacity of soil supply mineral nitrogen and storage organic nitrogen were intensified.

  15. Optimizing the design of small-sized nucleus breeding programs for dairy cattle with minimal performance recording.

    PubMed

    Kariuki, C M; Komen, H; Kahi, A K; van Arendonk, J A M

    2014-12-01

    Dairy cattle breeding programs in developing countries are constrained by minimal and erratic pedigree and performance recording on cows on commercial farms. Small-sized nucleus breeding programs offer a viable alternative. Deterministic simulations using selection index theory were performed to determine the optimum design for small-sized nucleus schemes for dairy cattle. The nucleus was made up of 197 bulls and 243 cows distributed in 8 non-overlapping age classes. Each year 10 sires and 100 dams were selected to produce the next generation of male and female selection candidates. Conception rates and sex ratio were fixed at 0.90 and 0.50, respectively, translating to 45 male and 45 female candidates joining the nucleus per year. Commercial recorded dams provided information for genetic evaluation of selection candidates (bulls) in the nucleus. Five strategies were defined: nucleus records only [within-nucleus dam performance (DP)], progeny records in addition to nucleus records [progeny testing (PT)], genomic information only [genomic selection (GS)], dam performance records in addition to genomic information (GS+DP), and progeny records in addition to genomic information (GS+PT). Alternative PT, GS, GS+DP, and GS+PT schemes differed in the number of progeny per sire and size of reference population. The maximum number of progeny records per sire was 30, and the maximum size of the reference population was 5,000. Results show that GS schemes had higher responses and lower accuracies compared with other strategies, with the higher response being due to shorter generation intervals. Compared with similar sized progeny-testing schemes, genomic-selection schemes would have lower accuracies but these are offset by higher responses per year, which might provide additional incentive for farmers to participate in recording. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  16. A Meta-Analysis of Class Sizes and Ratios in Early Childhood Education Programs: Are Thresholds of Quality Associated with Greater Impacts on Cognitive, Achievement, and Socioemotional Outcomes?

    ERIC Educational Resources Information Center

    Bowne, Jocelyn Bonnes; Magnuson, Katherine A.; Schindler, Holly S.; Duncan, Greg J.; Yoshikawa, Hirokazu

    2017-01-01

    This study uses data from a comprehensive database of U.S. early childhood education program evaluations published between 1960 and 2007 to evaluate the relationship between class size, child-teacher ratio, and program effect sizes for cognitive, achievement, and socioemotional outcomes. Both class size and child-teacher ratio showed nonlinear…

  17. Class Size: A Battle between Accountability and Quality Instruction

    ERIC Educational Resources Information Center

    Januszka, Cynthia; Dixon-Krauss, Lisbeth

    2008-01-01

    A substantial amount of controversy surrounds the issue of class size in public schools. Parents and teachers are on one side, touting the benefits of smaller class sizes (e.g., increased academic achievement, greater student-teacher interaction, utilization of more innovative teaching strategies, and a decrease in discipline problems). On the…

  18. Another Look at the Glass and Smith Study on Class Size

    ERIC Educational Resources Information Center

    Phelps, James L.

    2011-01-01

    One of the most influential studies affecting educational policy is Glass and Smith's 1978 study, "Meta-Analysis of Research on the Relationship of Class-Size and Achievement." Since its publication, educational policymakers have referenced it frequently as the justification for reducing class size. While teachers and the public had long believed…

  19. Class Size and Academic Achievement in Introductory Political Science Courses

    ERIC Educational Resources Information Center

    Towner, Terri L.

    2016-01-01

    Research on the influence of class size on student academic achievement is important for university instructors, administrators, and students. The article examines the influence of class size--a small section versus a large section--in introductory political science courses on student grades in two comparable semesters. It is expected that…

  20. Class Size Revisited: Glass and Smith in Perspective.

    ERIC Educational Resources Information Center

    Hess, Fritz

    Gene V. Glass and Mary Lee Smith claim in their report, "Meta-Analysis of Research on the Relationship of Class-Size and Achievement" (ED 168 129), that their integration of data from 80 previous studies through complex regression analysis techniques revealed a "clear and strong relationship" between decreases in class size and increases in…

  1. Class Size Reduction and Academic Achievement of Low-Socioeconomic Students

    ERIC Educational Resources Information Center

    Rollins, Sarah E.

    2013-01-01

    Concern about the academic and social well-being of public education in the United States has been at the forefront of education reform. Increased class sizes, amended curriculum standards, and accountability standards have guided the way toward ways to reduce class sizes to meet the demands put upon educators. This study investigated the…

  2. The Effects of Videoconferencing, Class Size, and Learner Characteristics on Training Outcomes

    ERIC Educational Resources Information Center

    Brown, Kenneth G.; Rietz, Thomas A.; Sugrue, Brenda

    2005-01-01

    We examined direct and interaction effects of learners' characteristics (cognitive ability, prior knowledge, prior experience, and motivation to learn) and classroom characteristics (videoconferencing and class size) on learning from a 16-week course. A 2x2 quasi-experimental design varied the class size between large (approximately 60 students)…

  3. How Class Size Makes a Difference. Research & Development.

    ERIC Educational Resources Information Center

    Egelson, Paula; Harman, Patrick; Hood, Art; Achilles, C. M.

    Landmark studies in the late 1970s and 1980s, including Tennessee's Project STAR (Student Teacher Achievement Ratio), raised the nation's awareness that reduced class size does have a positive impact on students' academic achievement. This report provides a sketch of class-size reduction's history in a prefatory overview. Chapter 1 describes…

  4. Effects of Class Size and Attendance Policy on University Classroom Interaction in Taiwan

    ERIC Educational Resources Information Center

    Bai, Yin; Chang, Te-Sheng

    2016-01-01

    Classroom interaction experience is one of the main parts of students' learning lives. However, surprisingly little research has investigated students' perceptions of classroom interaction with different attendance policies across different class sizes in the higher education system. To elucidate the effects of class size and attendance policy on…

  5. Preliminary clinical outcomes of image-guided 3-dimensional conformal radiotherapy for limited brain metastases instead of stereotactic irradiation referral.

    PubMed

    Ohtakara, Kazuhiro; Hoshi, Hiroaki

    2014-06-01

    To determine the preliminary clinical outcomes of image-guided 3-dimensional conformal radiotherapy (IG-3DCRT) for limited but variably-sized brain metastases (BM). Sixty-two lesions in 24 patients were retrospectively evaluated; out of these patients 75% were ≥ 65 years of age, and 37.5% were categorized into recursive partitioning analysis (RPA) class 3. The median value for the maximum diameter of the lesions was 19 mm (range=4-72 mm). The median sole treatment dose was 36 Gy in 10 fractions. The median survival durations after IG-3DCRT were 12.0 months and 3.2 months for patients categorized into RPA classes ≤ 2 and 3, respectively. Local recurrences occurred in two lesions with a 6-month local control probability of 93.0%. Major toxicities included radiation necrosis in two patients. IG-3DCRT is feasible even for patients with limited BM who are categorized into RPA class 3, and confers clinical outcomes comparable to those of stereotactic radiosurgery, including excellent local control and minimal toxicity even for large tumors. Copyright© 2014 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  6. Exploring the full natural variability of eruption sizes within probabilistic hazard assessment of tephra dispersal

    NASA Astrophysics Data System (ADS)

    Selva, Jacopo; Sandri, Laura; Costa, Antonio; Tonini, Roberto; Folch, Arnau; Macedonio, Giovanni

    2014-05-01

    The intrinsic uncertainty and variability associated to the size of next eruption strongly affects short to long-term tephra hazard assessment. Often, emergency plans are established accounting for the effects of one or a few representative scenarios (meant as a specific combination of eruptive size and vent position), selected with subjective criteria. On the other hand, probabilistic hazard assessments (PHA) consistently explore the natural variability of such scenarios. PHA for tephra dispersal needs the definition of eruptive scenarios (usually by grouping possible eruption sizes and vent positions in classes) with associated probabilities, a meteorological dataset covering a representative time period, and a tephra dispersal model. PHA results from combining simulations considering different volcanological and meteorological conditions through a weight given by their specific probability of occurrence. However, volcanological parameters, such as erupted mass, eruption column height and duration, bulk granulometry, fraction of aggregates, typically encompass a wide range of values. Because of such a variability, single representative scenarios or size classes cannot be adequately defined using single values for the volcanological inputs. Here we propose a method that accounts for this within-size-class variability in the framework of Event Trees. The variability of each parameter is modeled with specific Probability Density Functions, and meteorological and volcanological inputs are chosen by using a stratified sampling method. This procedure allows avoiding the bias introduced by selecting single representative scenarios and thus neglecting most of the intrinsic eruptive variability. When considering within-size-class variability, attention must be paid to appropriately weight events falling within the same size class. While a uniform weight to all the events belonging to a size class is the most straightforward idea, this implies a strong dependence on the thresholds dividing classes: under this choice, the largest event of a size class has a much larger weight than the smallest event of the subsequent size class. In order to overcome this problem, in this study, we propose an innovative solution able to smoothly link the weight variability within each size class to the variability among the size classes through a common power law, and, simultaneously, respect the probability of different size classes conditional to the occurrence of an eruption. Embedding this procedure into the Bayesian Event Tree scheme enables for tephra fall PHA, quantified through hazard curves and maps representing readable results applicable in planning risk mitigation actions, and for the quantification of its epistemic uncertainties. As examples, we analyze long-term tephra fall PHA at Vesuvius and Campi Flegrei. We integrate two tephra dispersal models (the analytical HAZMAP and the numerical FALL3D) into BET_VH. The ECMWF reanalysis dataset are used for exploring different meteorological conditions. The results obtained clearly show that PHA accounting for the whole natural variability significantly differs from that based on a representative scenarios, as in volcanic hazard common practice.

  7. 39 CFR 3010.28 - Maximum size of unused rate adjustment authority rate adjustments.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Maximum size of unused rate adjustment authority rate adjustments. 3010.28 Section 3010.28 Postal Service POSTAL REGULATORY COMMISSION PERSONNEL REGULATION OF RATES FOR MARKET DOMINANT PRODUCTS Rules for Applying the Price Cap § 3010.28 Maximum size of...

  8. The impact of habitat fragmentation on tsetse abundance on the plateau of eastern Zambia.

    PubMed

    Ducheyne, E; Mweempwa, C; De Pus, C; Vernieuwe, H; De Deken, R; Hendrickx, G; Van den Bossche, P

    2009-09-01

    Tsetse-transmitted human or livestock trypanosomiasis is one of the major constraints to rural development in sub-Saharan Africa. The epidemiology of the disease is determined largely by tsetse fly density. A major factor, contributing to tsetse population density is the availability of suitable habitat. In large parts of Africa, encroachment of people and their livestock resulted in a destruction and fragmentation of such suitable habitat. To determine the effect of habitat change on tsetse density a study was initiated in a tsetse-infested zone of eastern Zambia. The study area represents a gradient of habitat change, starting from a zone with high levels of habitat destruction and ending in an area where livestock and people are almost absent. To determine the distribution and density of the fly, tsetse surveys were conducted throughout the study area in the dry and in the rainy season. Landsat ETM+ imagery covering the study area were classified into four land cover classes (munga, miombo, agriculture and settlements) and two auxiliary spectral classes (clouds and shadow) using a Gaussian Maximum Likelihood Classifier. The classes were regrouped into natural vegetation and agricultural zone. The binary images were overlaid with hexagons to obtain the spatial spectrum of spatial pattern. Hexagonal coverage was selected because of its compact and regular form. To identify scale-specific spatial patterns and associated entomological phenomena, the size of the hexagonal coverage was varied (250 and 500 m). Per coverage, total class area, mean patch size, number of patches and patch size standard deviation were used as fragmentation indices. Based on the fragmentation index values, the study zone was classified using a Partitioning Around Mediods (PAM) method. The number of classes was determined using the Wilks' lambda coefficient. To determine the impact of habitat fragmentation on tsetse abundance, the correlation between the fragmentation indices and the index of apparent density of the flies was determined and habitat changes most affecting tsetse abundance was identified. From this it followed that there is a clear relationship between habitat fragmentation and the abundance of tsetse flies. Heavily fragmented areas have lower numbers of tsetse flies, but when the fragmentation of natural vegetation decreases, the number of tsetse flies increases following a sigmoidal-like curve.

  9. Polymorphic mountain whitefish (Prosopium williamsoni) in a coastal riverscape: size class assemblages, distribution, and habitat associations

    USGS Publications Warehouse

    Starr, James C.; Torgersen, Christian E.

    2015-01-01

    We compared the assemblage structure, spatial distributions, and habitat associations of mountain whitefish (Prosopium williamsoni) morphotypes and size classes. We hypothesised that morphotypes would have different spatial distributions and would be associated with different habitat features based on feeding behaviour and diet. Spatially continuous sampling was conducted over a broad extent (29 km) in the Calawah River, WA (USA). Whitefish were enumerated via snorkelling in three size classes: small (10–29 cm), medium (30–49 cm), and large (≥50 cm). We identified morphotypes based on head and snout morphology: a pinocchio form that had an elongated snout and a normal form with a blunted snout. Large size classes of both morphotypes were distributed downstream of small and medium size classes, and normal whitefish were distributed downstream of pinocchio whitefish. Ordination of whitefish assemblages with nonmetric multidimensional scaling revealed that normal whitefish size classes were associated with higher gradient and depth, whereas pinocchio whitefish size classes were positively associated with pool area, distance upstream, and depth. Reach-scale generalised additive models indicated that normal whitefish relative density was associated with larger substrate size in downstream reaches (R2 = 0.64), and pinocchio whitefish were associated with greater stream depth in the reaches farther upstream (R2 = 0.87). These results suggest broad-scale spatial segregation (1–10 km), particularly between larger and more phenotypically extreme individuals. These results provide the first perspective on spatial distributions and habitat relationships of polymorphic mountain whitefish.

  10. Selection of the Maximum Spatial Cluster Size of the Spatial Scan Statistic by Using the Maximum Clustering Set-Proportion Statistic.

    PubMed

    Ma, Yue; Yin, Fei; Zhang, Tao; Zhou, Xiaohua Andrew; Li, Xiaosong

    2016-01-01

    Spatial scan statistics are widely used in various fields. The performance of these statistics is influenced by parameters, such as maximum spatial cluster size, and can be improved by parameter selection using performance measures. Current performance measures are based on the presence of clusters and are thus inapplicable to data sets without known clusters. In this work, we propose a novel overall performance measure called maximum clustering set-proportion (MCS-P), which is based on the likelihood of the union of detected clusters and the applied dataset. MCS-P was compared with existing performance measures in a simulation study to select the maximum spatial cluster size. Results of other performance measures, such as sensitivity and misclassification, suggest that the spatial scan statistic achieves accurate results in most scenarios with the maximum spatial cluster sizes selected using MCS-P. Given that previously known clusters are not required in the proposed strategy, selection of the optimal maximum cluster size with MCS-P can improve the performance of the scan statistic in applications without identified clusters.

  11. Selection of the Maximum Spatial Cluster Size of the Spatial Scan Statistic by Using the Maximum Clustering Set-Proportion Statistic

    PubMed Central

    Ma, Yue; Yin, Fei; Zhang, Tao; Zhou, Xiaohua Andrew; Li, Xiaosong

    2016-01-01

    Spatial scan statistics are widely used in various fields. The performance of these statistics is influenced by parameters, such as maximum spatial cluster size, and can be improved by parameter selection using performance measures. Current performance measures are based on the presence of clusters and are thus inapplicable to data sets without known clusters. In this work, we propose a novel overall performance measure called maximum clustering set–proportion (MCS-P), which is based on the likelihood of the union of detected clusters and the applied dataset. MCS-P was compared with existing performance measures in a simulation study to select the maximum spatial cluster size. Results of other performance measures, such as sensitivity and misclassification, suggest that the spatial scan statistic achieves accurate results in most scenarios with the maximum spatial cluster sizes selected using MCS-P. Given that previously known clusters are not required in the proposed strategy, selection of the optimal maximum cluster size with MCS-P can improve the performance of the scan statistic in applications without identified clusters. PMID:26820646

  12. Prey size and availability limits maximum size of rainbow trout in a large tailwater: insights from a drift-foraging bioenergetics model

    USGS Publications Warehouse

    Dodrill, Michael J.; Yackulic, Charles B.; Kennedy, Theodore A.; Haye, John W

    2016-01-01

    The cold and clear water conditions present below many large dams create ideal conditions for the development of economically important salmonid fisheries. Many of these tailwater fisheries have experienced declines in the abundance and condition of large trout species, yet the causes of these declines remain uncertain. Here, we develop, assess, and apply a drift-foraging bioenergetics model to identify the factors limiting rainbow trout (Oncorhynchus mykiss) growth in a large tailwater. We explored the relative importance of temperature, prey quantity, and prey size by constructing scenarios where these variables, both singly and in combination, were altered. Predicted growth matched empirical mass-at-age estimates, particularly for younger ages, demonstrating that the model accurately describes how current temperature and prey conditions interact to determine rainbow trout growth. Modeling scenarios that artificially inflated prey size and abundance demonstrate that rainbow trout growth is limited by the scarcity of large prey items and overall prey availability. For example, shifting 10% of the prey biomass to the 13 mm (large) length class, without increasing overall prey biomass, increased lifetime maximum mass of rainbow trout by 88%. Additionally, warmer temperatures resulted in lower predicted growth at current and lower levels of prey availability; however, growth was similar across all temperatures at higher levels of prey availability. Climate change will likely alter flow and temperature regimes in large rivers with corresponding changes to invertebrate prey resources used by fish. Broader application of drift-foraging bioenergetics models to build a mechanistic understanding of how changes to habitat conditions and prey resources affect growth of salmonids will benefit management of tailwater fisheries.

  13. The development of a lower heat concrete mixture for mass concrete placement conditions

    NASA Astrophysics Data System (ADS)

    Crowley, Aaron Martin

    The hydration process of portland cement (PC) is exothermic; therefore, the thermal behavior of concrete has to be taken into consideration when placed in a large mass. The research presented involves a Tennessee Department of Transportation (TDOT) Class S (seal) portland cement concrete (PCC) which is used as a foundation seal during construction of bridge abutments and piers. A Class S PCC mixture meeting the 2006 TDOT specifications has the potential to generate excessive amounts of heat and induce thermal cracking in structural elements. The purpose of the study is to reduce the heat generation of a Class S PCC while maintaining adequate values of other engineering properties. Due to the possibility of underwater placement of a Class S PCC, reduction in the total cementing materials content were not considered in this study. Five candidate mixtures were used to compare against a typical TDOT Class S mixture. The five candidate Class S-LH (lower heat) mixtures were 45, 60, 70% Grade 120 slag substitutions for PC as well as two ternary mixtures containing Grade 120 slag and Class F fly ash. Ten batches of each mixture were produced. All plastic and hardened properties met TDOT 604.03 Class S requirements for analytical comparison. The 70% Grade 120 slag Class S-LH mixture was analytically superior for all hardened properties and at reducing heat generation. Since the 70% Grade 120 slag Class S-LH mixture proved to be superior in laboratory conditions; it was selected for further evaluation in the field testing portion of the research. The 70% Grade 120 slag mixture produced a significantly lower maximum temperature as well as a significantly lower maximum differential temperature than a TDOT Class S mixture with 20% Class C fly ash in side-by-side 18 cubic yard cube field placements. Research results and literature recommend that engineers should decide when mass concrete conditions are appropriate during construction practices. When mass concrete conditions are considered, contractors should be responsible for monitoring and limiting maximum internal temperature to 150°F and the maximum differential temperature to 35°F. A temperature control plan should be established using various methods, and not limited to only PCC mixture design.

  14. Class Size Reduction in Practice: Investigating the Influence of the Elementary School Principal

    ERIC Educational Resources Information Center

    Burch, Patricia; Theoharis, George; Rauscher, Erica

    2010-01-01

    Class size reduction (CSR) has emerged as a very popular, if not highly controversial, policy approach for reducing the achievement gap. This article reports on findings from an implementation study of class size reduction policy in Wisconsin entitled the Student Achievement Guarantee in Education (SAGE). Drawing on case studies of nine schools,…

  15. What We Have Learned about Class Size Reduction in California. Capstone Report.

    ERIC Educational Resources Information Center

    Bohrnstedt, George W., Ed.; Stecher, Brian M., Ed.

    This final report on the California Class Size Reduction (CSR) initiative summarizes findings from three earlier reports dating back to 1997. Chapter 1 recaps the history of California's CSR initiative and includes a discussion of what state leaders' expectations were when CSR was passed. The chapter also describes research on class-size reduction…

  16. Teacher/Student Interactions in Public Elementary Schools When Class Size is a Factor.

    ERIC Educational Resources Information Center

    Krieger, Jean D.

    This report describes a study designed to discover the nature of teacher-student interactions in regular-size classes with 25 or more students and small-size classes with fewer than 18 students. Eleven public-school primary classrooms were observed, and the interactions between the teachers and students were studied. Verbal and nonverbal…

  17. Serendipitous Policy Implications from Class-Size-Initiated Inquiry: IAQ?

    ERIC Educational Resources Information Center

    Achilles, C. M.; Prout, Jean; Finn, J. D.; Bobbett, Gordon C.

    The level of carbon dioxide in a classroom can have a significant negative effect on teaching and learning. Carbon dioxide (CO2) level is affected by class size and time of day. Six urban schools were studied to characterize the effects of these three factors on different class sizes. Carbon monoxide, CO2, temperature, and relative humidity…

  18. The Cost of Class Size Reduction: Advice for Policymakers. RAND Graduate School Dissertation.

    ERIC Educational Resources Information Center

    Reichardt, Robert E.

    This dissertation provides information to state-level policymakers that will help them avoid two implementation problems seen in the past in California's class-size-reduction (CSR) reform. The first problem was that flat, per student reimbursement did not adequately cover costs in districts with larger pre-CSR class-sizes or smaller schools. The…

  19. Size Matters. The Relevance and Hicksian Surplus of Preferred College Class Size

    ERIC Educational Resources Information Center

    Mandel, Philipp; Susmuth, Bernd

    2011-01-01

    The contribution of this paper is twofold. First, we examine the impact of class size on student evaluations of instructor performance using a sample of approximately 1400 economics classes held at the University of Munich from Fall 1998 to Summer 2007. We offer confirmatory evidence for the recent finding of a large, highly significant, and…

  20. Class Size Effects on Reading Achievement Using PIRLS Data: Evidence from Greece

    ERIC Educational Resources Information Center

    Konstantopoulos, Spyros; Traynor, Anne

    2014-01-01

    Background/Context: The effects of class size on student achievement have gained considerable attention in education research and policy, especially over the last 30 years. Perhaps the best evidence about the effects of class size thus far has been produced from analyses of Project STAR data, a large-scale experiment where students and teachers…

  1. The Effects of Class Size on Student Achievement in Intermediate Level Elementary Students

    ERIC Educational Resources Information Center

    McInerney, Melissa

    2014-01-01

    Class size and student achievement have been debated for decades. The vast amount of research on this topic is either conflicting or inconclusive. There are large and small scale studies that support both sides of this dilemma (Achilles, Nye, Boyd-Zaharias, Fulton, & Cain, 1994; Glass & Smith, 1979; Slavin, 1989). Class size reduction is a…

  2. Class Size and Language Learning in Hong Kong: The Students' Perspective

    ERIC Educational Resources Information Center

    Harfitt, Gary James

    2012-01-01

    Background: There is currently ongoing debate in Hong Kong between the teachers' union and the Government on the reduction of large class size (typically more than 40 students) in secondary schools and whether smaller class sizes might facilitate improvements in teaching and learning. In fact, many Hong Kong secondary schools have already started…

  3. Does Class Size in First Grade Relate to Children's Academic and Social Performance or Observed Classroom Processes?

    ERIC Educational Resources Information Center

    Allhusen, Virginia; Belsky, Jay; Booth-LaForce, Cathryn L.; Bradley, Robert; Brownwell, Celia A; Burchinal, Margaret; Campbell, Susan B.; Clarke-Stewart, K. Alison; Cox, Martha; Friedman, Sarah L.; Hirsh-Pasek, Kathryn; Houts, Renate M.; Huston, Aletha; Jaeger, Elizabeth; Johnson, Deborah J.; Kelly, Jean F.; Knoke, Bonnie; Marshall, Nancy; McCartney, Kathleen; Morrison, Frederick J.; O'Brien, Marion; Tresch Owen, Margaret; Payne, Chris; Phillips, Deborah; Pianta, Robert; Randolph, Suzanne M.; Robeson, Wendy W.; Spieker, Susan; Lowe Vandell, Deborah; Weinraub, Marsha

    2004-01-01

    This study evaluated the extent to which first-grade class size predicted child outcomes and observed classroom processes for 651 children (in separate classrooms). Analyses examined observed child-adult ratios and teacher-reported class sizes. Smaller classrooms showed higher quality instructional and emotional support, although children were…

  4. Class Size and Student Evaluations in Sweden

    ERIC Educational Resources Information Center

    Westerlund, Joakim

    2008-01-01

    This paper examines the effect of class size on student evaluations of the quality of an introductory mathematics course at Lund University in Sweden. In contrast to much other studies, we find a large negative, and statistically significant, effect of class size on the quality of the course. This result appears to be quite robust, as almost all…

  5. Parametric Mass Modeling for Mars Entry, Descent and Landing System Analysis Study

    NASA Technical Reports Server (NTRS)

    Samareh, Jamshid A.; Komar, D. R.

    2011-01-01

    This paper provides an overview of the parametric mass models used for the Entry, Descent, and Landing Systems Analysis study conducted by NASA in FY2009-2010. The study examined eight unique exploration class architectures that included elements such as a rigid mid-L/D aeroshell, a lifting hypersonic inflatable decelerator, a drag supersonic inflatable decelerator, a lifting supersonic inflatable decelerator implemented with a skirt, and subsonic/supersonic retro-propulsion. Parametric models used in this study relate the component mass to vehicle dimensions and mission key environmental parameters such as maximum deceleration and total heat load. The use of a parametric mass model allows the simultaneous optimization of trajectory and mass sizing parameters.

  6. 50 CFR 697.21 - Gear identification and marking, escape vent, maximum trap size, and ghost panel requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... vent, maximum trap size, and ghost panel requirements. 697.21 Section 697.21 Wildlife and Fisheries... identification and marking, escape vent, maximum trap size, and ghost panel requirements. (a) Gear identification... Administrator finds to be consistent with paragraph (c) of this section. (d) Ghost panel. (1) Lobster traps not...

  7. 50 CFR 697.21 - Gear identification and marking, escape vent, maximum trap size, and ghost panel requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... vent, maximum trap size, and ghost panel requirements. 697.21 Section 697.21 Wildlife and Fisheries... identification and marking, escape vent, maximum trap size, and ghost panel requirements. (a) Gear identification... Administrator finds to be consistent with paragraph (c) of this section. (d) Ghost panel. (1) Lobster traps not...

  8. 50 CFR 697.21 - Gear identification and marking, escape vent, maximum trap size, and ghost panel requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... vent, maximum trap size, and ghost panel requirements. 697.21 Section 697.21 Wildlife and Fisheries... identification and marking, escape vent, maximum trap size, and ghost panel requirements. (a) Gear identification... Administrator finds to be consistent with paragraph (c) of this section. (d) Ghost panel. (1) Lobster traps not...

  9. Modeling of mineral dust in the atmosphere: Sources, transport, and optical thickness

    NASA Technical Reports Server (NTRS)

    Tegen, Ina; Fung, Inez

    1994-01-01

    A global three-dimensional model of the atmospheric mineral dust cycle is developed for the study of its impact on the radiative balance of the atmosphere. The model includes four size classes of minearl dust, whose source distributions are based on the distributions of vegetation, soil texture and soil moisture. Uplift and deposition are parameterized using analyzed winds and rainfall statistics that resolve high-frequency events. Dust transport in the atmosphere is simulated with the tracer transport model of the Goddard Institute for Space Studies. The simulated seasonal variations of dust concentrations show general reasonable agreement with the observed distributions, as do the size distributions at several observing sites. The discrepancies between the simulated and the observed dust concentrations point to regions of significant land surface modification. Monthly distribution of aerosol optical depths are calculated from the distribution of dust particle sizes. The maximum optical depth due to dust is 0.4-0.5 in the seasonal mean. The main uncertainties, about a factor of 3-5, in calculating optical thicknesses arise from the crude resolution of soil particle sizes, from insufficient constraint by the total dust loading in the atmosphere, and from our ignorance about adhesion, agglomeration, uplift, and size distributions of fine dust particles (less than 1 micrometer).

  10. Comparison of Maximum Stretch Forces between Femtosecond Laser-Assisted Capsulotomy and Continuous Curvilinear Capsulorhexis

    PubMed Central

    Ichikawa, Kei; Tanaka, Yoshiki; Kato, Yukihito; Horai, Rie; Tamaoki, Akeno; Ichikawa, Kazuo

    2017-01-01

    The current study reports comparing the postoperative mechanical properties of the anterior capsule between femtosecond laser capsulotomy (FLC) and continuous curvilinear capsulorhexis (CCC) of variable size and shape in porcine eyes. All CCCs were created using capsule forceps. Irregular or eccentric CCCs were also created to simulate real cataract surgery. For FLC, capsulotomies 5.3 mm in diameter were created using the LenSx® (Alcon) platform. Fresh porcine eyes were used in all experiments. The edges of the capsule openings were pulled at a constant speed using two L-shaped jigs. Stretch force and distance were recorded over time, and the maximum values in this regard were defined as those that were recorded when the capsule broke. There was no difference in maximum stretch force between CCC and FLC. There were no differences in circularity between FLC and same-sized CCC. However, same-sized CCC did show significantly higher maximum stretch forces than FLC. Teardrop-shaped CCC showed lower maximum stretch forces than same-sized CCC and FLC. Heart-shaped CCC showed lower maximum stretch forces than same-sized CCC. Conclusively, while capsule edge strength after CCC varied depending on size or irregularities, FLC had the advantage of stable maximum stretch forces. PMID:28210504

  11. Comparison of Maximum Stretch Forces between Femtosecond Laser-Assisted Capsulotomy and Continuous Curvilinear Capsulorhexis.

    PubMed

    Takagi, Mari; Kojima, Takashi; Ichikawa, Kei; Tanaka, Yoshiki; Kato, Yukihito; Horai, Rie; Tamaoki, Akeno; Ichikawa, Kazuo

    2017-01-01

    The current study reports comparing the postoperative mechanical properties of the anterior capsule between femtosecond laser capsulotomy (FLC) and continuous curvilinear capsulorhexis (CCC) of variable size and shape in porcine eyes. All CCCs were created using capsule forceps. Irregular or eccentric CCCs were also created to simulate real cataract surgery. For FLC, capsulotomies 5.3 mm in diameter were created using the LenSx® (Alcon) platform. Fresh porcine eyes were used in all experiments. The edges of the capsule openings were pulled at a constant speed using two L-shaped jigs. Stretch force and distance were recorded over time, and the maximum values in this regard were defined as those that were recorded when the capsule broke. There was no difference in maximum stretch force between CCC and FLC. There were no differences in circularity between FLC and same-sized CCC. However, same-sized CCC did show significantly higher maximum stretch forces than FLC. Teardrop-shaped CCC showed lower maximum stretch forces than same-sized CCC and FLC. Heart-shaped CCC showed lower maximum stretch forces than same-sized CCC. Conclusively, while capsule edge strength after CCC varied depending on size or irregularities, FLC had the advantage of stable maximum stretch forces.

  12. The Effects of Class Size in Online College Courses: Experimental Evidence. CEPA Working Paper No. 15-14

    ERIC Educational Resources Information Center

    Bettinger, Eric; Doss, Christopher; Loeb, Susanna; Taylor, Eric

    2015-01-01

    Class size is a first-order consideration in the study of education production and education costs. How larger or smaller classes affect student outcomes is especially relevant to the growth and design of online classes. We study a field experiment in which college students were quasi-randomly assigned to either a large or a small class. All…

  13. 45 CFR 1306.32 - Center-based program option.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Center-based program option. (a) Class size. (1) Head Start classes must be staffed by a teacher and an aide or two teachers and, whenever possible, a volunteer. (2) Grantees must determine their class size based on the predominant age of the children who will participate in the class and whether or not a...

  14. Modified centroid for estimating sand, silt, and clay from soil texture class

    USDA-ARS?s Scientific Manuscript database

    Models that require inputs of soil particle size commonly use soil texture class for input; however, texture classes do not represent the continuum of soil size fractions. Soil texture class and clay percentage are collected as a standard practice for many land management agencies (e.g., NRCS, BLM, ...

  15. Special Education Program Standards Study. Commonwealth of Virginia. Final Technical Report.

    ERIC Educational Resources Information Center

    Keith, Timothy Z.; And Others

    This federally funded study investigated Virginia special education program standards, focusing on local applications of the standards for class size and class mix and the effect of varying class size and class mix on student outcomes. The study concentrated on students with educable mental retardation, severe emotional disturbance, and specific…

  16. The False Promise of Class-Size Reduction

    ERIC Educational Resources Information Center

    Chingos, Matthew M.

    2011-01-01

    Class-size reduction, or CSR, is enormously popular with parents, teachers, and the public in general. Many parents believe that their children will benefit from more individualized attention in a smaller class and many teachers find smaller classes easier to manage. The pupil-teacher ratio is an easy statistic for the public to monitor as a…

  17. 46 CFR 56.30-10 - Flanged joints (modifies 104.5.1(a)).

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... addition of a strength fillet weld of the size as shown, may be used in Class I systems not exceeding 750... buttwelding flanges must be provided. For Class II piping systems, the size of the strength fillet may be... void spaces is desirable. For systems of Class II, the size of the strength fillet may be limited to a...

  18. 46 CFR 56.30-10 - Flanged joints (modifies 104.5.1(a)).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... addition of a strength fillet weld of the size as shown, may be used in Class I systems not exceeding 750... buttwelding flanges must be provided. For Class II piping systems, the size of the strength fillet may be... void spaces is desirable. For systems of Class II, the size of the strength fillet may be limited to a...

  19. 46 CFR 56.30-10 - Flanged joints (modifies 104.5.1(a)).

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... addition of a strength fillet weld of the size as shown, may be used in Class I systems not exceeding 750... buttwelding flanges must be provided. For Class II piping systems, the size of the strength fillet may be... void spaces is desirable. For systems of Class II, the size of the strength fillet may be limited to a...

  20. Teacher Aides, Class Size and Academic Achievement: A Preliminary Evaluation of Indiana's Prime Time.

    ERIC Educational Resources Information Center

    Lapsley, Daniel K.; Daytner, Katrina M.; Kelly, Ken; Maxwell, Scott E.

    This large-scale evaluation of Indiana's Prime Time, a funding mechanism designed to reduce class size or pupil-teacher ratio (PTR) in grades K-3 examined the academic performance of nearly 11,000 randomly selected third graders on the state mandated standardized achievement test as a function of class size, PTR, and presence of an instructional…

  1. The Impact of a Universal Class-Size Reduction Policy: Evidence from Florida's Statewide Mandate

    ERIC Educational Resources Information Center

    Chingos, Matthew M.

    2012-01-01

    Class-size reduction (CSR) mandates presuppose that resources provided to reduce class size will have a larger impact on student outcomes than resources that districts can spend as they see fit. I estimate the impact of Florida's statewide CSR policy by comparing the deviations from prior achievement trends in districts that were required to…

  2. Class Size and Sorting in Market Equilibrium: Theory and Evidence. NBER Working Paper No. 13303

    ERIC Educational Resources Information Center

    Urquiola, Miguel; Verhoogen, Eric

    2007-01-01

    This paper examines how schools choose class size and how households sort in response to those choices. Focusing on the highly liberalized Chilean education market, we develop a model in which schools are heterogeneous in an underlying productivity parameter, class size is a component of school quality, households are heterogeneous in income and…

  3. The Class Size Question: A Study at Different Levels of Analysis. ACER Research Monograph No. 26.

    ERIC Educational Resources Information Center

    Larkin, Anthony I.; Keeves, John P.

    The purpose of this investigation was to examine the ways in which class size affected other facets of the educational environment of the classroom. The study focused on the commonly found positive relationship between class size and achievement. The most plausible explanation of the evidence seems to involve the effects of grouping more able…

  4. Reducing Class Size: A Smart Way To Improve America's Urban Schools. Second Edition.

    ERIC Educational Resources Information Center

    Naik, Manish; Casserly, Michael; Uro, Gabriela

    The Council of the Great City Schools, a coalition of the largest urban public schools in the United States, surveyed its membership to determine how they were using federal class size reduction funds in the 2000-2001 school year. Thirty-six major urban school systems responded. Results indicate that the federal class size reduction program is…

  5. Microcystin distribution in physical size class separations of natural plankton communities

    USGS Publications Warehouse

    Graham, J.L.; Jones, J.R.

    2007-01-01

    Phytoplankton communities in 30 northern Missouri and Iowa lakes were physically separated into 5 size classes (>100 ??m, 53-100 ??m, 35-53 ??m, 10-35 ??m, 1-10 ??m) during 15-21 August 2004 to determine the distribution of microcystin (MC) in size fractionated lake samples and assess how net collections influence estimates of MC concentration. MC was detected in whole water (total) from 83% of takes sampled, and total MC values ranged from 0.1-7.0 ??g/L (mean = 0.8 ??g/L). On average, MC in the > 100 ??m size class comprised ???40% of total MC, while other individual size classes contributed 9-20% to total MC. MC values decreased with size class and were significantly greater in the >100 ??m size class (mean = 0.5 ??g /L) than the 35-53 ??m (mean = 0.1 ??g/L), 10-35 ??m (mean = 0.0 ??g/L), and 1-10 ??m (mean = 0.0 ??g/L) size classes (p < 0.01). MC values in nets with 100-??m, 53-??m, 35-??m, and 10-??m mesh were cumulatively summed to simulate the potential bias of measuring MC with various size plankton nets. On average, a 100-??m net underestimated total MC by 51%, compared to 37% for a 53-??m net, 28% for a 35-??m net, and 17% for a 10-??m net. While plankton nets consistently underestimated total MC, concentration of algae with net sieves allowed detection of MC at low levels (???0.01 ??/L); 93% of lakes had detectable levels of MC in concentrated samples. Thus, small mesh plankton nets are an option for documenting MC occurrence, but whole water samples should be collected to characterize total MC concentrations. ?? Copyright by the North American Lake Management Society 2007.

  6. Lake sturgeon population characteristics in Rainy Lake, Minnesota and Ontario

    USGS Publications Warehouse

    Adams, W.E.; Kallemeyn, L.W.; Willis, D.W.

    2006-01-01

    Rainy Lake contains a native population of lake sturgeon Acipenser fulvescens that has been largely unstudied. The aims of this study were to document the population characteristics of lake sturgeon in Rainy Lake and to relate environmental factors to year-class strength for this population. Gill-netting efforts throughout the study resulted in the capture of 322 lake sturgeon, including 50 recaptures. Lake sturgeon in Rainy Lake was relatively plump and fast growing compared with a 32-population summary. Population samples were dominated by lake sturgeon between 110 and 150 cm total length. Age–structure analysis of the samples indicated few younger (<10 years) lake sturgeon, but the smallest gill net mesh size used for sampling was 102 mm (bar measure) and would not retain small sturgeon. Few lake sturgeon older than age 50 years were captured, and maximum age of sampled fish was 59 years. Few correlations existed between lake sturgeon year-class indices and both annual and monthly climate variables, except that mean June air temperature was positively correlated with year-class strength. Analysis of Rainy Lake water elevation and resulting lake sturgeon year-class strength indices across years yielded consistent but weak negative correlations between late April and early June, when spawning of lake sturgeon occurs. The baseline data collected in this study should allow Rainy Lake biologists to establish more specific research questions in the future.

  7. Variable coupling between sap-flow and transpiration in pine trees under drought conditions

    NASA Astrophysics Data System (ADS)

    Preisler, Yakir; Tatarinov, Fyodor; Rohatyn, Shani; Rotenberg, Eyal; Grunzweig, Jose M.; Yakir, Dan

    2016-04-01

    Changes in diurnal patterns in water transport and physiological activities in response to changes in environmental conditions are important adjustments of trees to drought. The rate of sap flow (SF) in trees is expected to be in agreement with the rate of tree-scale transpiration (T) and provides a powerful measure of water transport in the soil-plant-atmosphere system. The aim of this five-years study was to investigate the temporal links between SF and T in Pinus halepensis exposed to extreme seasonal drought in the Yatir forest in Israel. We continuously measured SF (20 trees), the daily variations in stem diameter (ΔDBH, determined with high precision dendrometers; 8 trees), and ecosystem evapotranspiration (ET; eddy covariance), which were complemented with short-term campaigns of leaf-scale measurements of H2O and CO2 gas exchange, water potentials, and hydraulic conductivity. During the rainy season, tree SF was well synchronized with ecosystem ET, reaching maximum rates during midday in all trees. However, during the dry season, the daily SF trends greatly varied among trees, allowing a classification of trees into three classes: 1) Trees that remain with SF maximum at midday, 2) trees that advanced their SF peak to early morning, and 3) trees that delayed their SF peak to late afternoon hours. This classification remained valid for the entire study period (2010-2015), and strongly correlated with tree height and DBH, and to a lower degree with crown size and competition index. In the dry season, class 3 trees (large) tended to delay the timing of SF maximum to the afternoon, and to advance their maximum diurnal DBH to early morning, while class 2 trees (smaller) advanced their SF maximum to early morning and had maximum daily DBH during midday and afternoon. Leaf-scale transpiration (T), measurements showed a typical morning peak in all trees, irrespective of classification, and a secondary peak in the afternoon in large trees only. Water potential and hydraulic conductivity in larger trees recovered faster from midday depression than in smaller ones. We concluded that the observed changes in the patterns of water flow into and out of the trees reflected differences in the utilization of external and internal 'water storage'. Large trees appear to rely on sufficient internal water storage that filled up in the morning (max DBH) and supported transpiration both in the morning and the afternoon, while SF increased throughout the day to compensate for the depletion in water storage (SF maximum in the afternoon). In contrast, small trees with insufficient internal water storage must rely on soil water availability and maximize SF in the morning to support concurrent tree transpiration, achieving some internal storage only in the afternoon, when T declines and maximum daily DBH is observed. The results indicated also that trees with insufficient internal storage, as can be detected by the simultaneous SF and DBH patterns, are likely to be more vulnerable to drought-related mortality since soil water availability may not be sufficient to support transpiration and stomata opening.

  8. Social Class and Income Inequality in the United States: Ownership, Authority, and Personal Income Distribution from 1980 to 2010

    PubMed Central

    Wodtke, Geoffrey T.

    2016-01-01

    This study outlines a theory of social class based on workplace ownership and authority relations, and it investigates the link between social class and growth in personal income inequality since the 1980s. Inequality trends are governed by changes in between-class income differences, changes in the relative size of different classes, and changes in within-class income dispersion. Data from the General Social Survey are used to investigate each of these changes in turn and to evaluate their impact on growth in inequality at the population level. Results indicate that between-class income differences grew by about 60 percent since the 1980s and that the relative size of different classes remained fairly stable. A formal decomposition analysis indicates that changes in the relative size of different social classes had a small dampening effect and that growth in between-class income differences had a large inflationary effect on trends in personal income inequality. PMID:27087695

  9. Social Class and Income Inequality in the United States: Ownership, Authority, and Personal Income Distribution from 1980 to 2010.

    PubMed

    Wodtke, Geoffrey T

    2016-03-01

    This study outlines a theory of social class based on workplace ownership and authority relations, and it investigates the link between social class and growth in personal income inequality since the 1980s. Inequality trends are governed by changes in between-class income differences, changes in the relative size of different classes, and changes in within-class income dispersion. Data from the General Social Survey are used to investigate each of these changes in turn and to evaluate their impact on growth in inequality at the population level. Results indicate that between-class income differences grew by about 60% since the 1980s and that the relative size of different classes remained fairly stable. A formal decomposition analysis indicates that changes in the relative size of different social classes had a small dampening effect and that growth in between-class income differences had a large inflationary effect on trends in personal income inequality.

  10. Study of effect of variables on particle size of telmisartan nanosuspensions using box-Behnken design.

    PubMed

    Rao, M R P; Bajaj, A

    2014-12-01

    Telmisartan, an orally active nonpeptide angiotensin II receptor antagonist is a BCS Class II drug having aqueous solubility of 9.9 µg/ml and hence oral bioavailability of 40%. The present study involved preparation of nanosuspensions by evaporative antisolvent precipitation technique to improve the saturation solubility and dissolution rate of telmisartan. Various stabilizers such as TPGS, PVPK 30, PEG 6000 were investigated of which TPGS was found to provide maximum decrease in particle size and accord greater stability to the nanosuspensions. Box-Behnken design was used to investigate the effect of independent variables like stabilizer concentration, time and speed of stirring on particle size of nanosuspensions. Pharmacodynamic studies using Goldblatt technique were undertaken to evaluate the effect of nano-sizing on the hypotensive effect of the drug. Concentration of TPGS and speed of rotation were found to play an important role in particle size of the nanosuspensions whereas time of stirring displayed an exponential relationship with particle size. Freeze dried nanocrystals obtained from nanosuspension of least particle size were found to have increased saturation solubility of telmisartan in different dissolution media. The reconstituted nanosuspension was found to reduce both systolic and diastolic blood pressure without affecting pulse pressure and heart rate. Statistical tools can be used to identify key process and formulation parameters which play a significant role in controlling the particle size in nanosuspensions. © Georg Thieme Verlag KG Stuttgart · New York.

  11. On the Importance of Cycle Minimum in Sunspot Cycle Prediction

    NASA Technical Reports Server (NTRS)

    Wilson, Robert M.; Hathaway, David H.; Reichmann, Edwin J.

    1996-01-01

    The characteristics of the minima between sunspot cycles are found to provide important information for predicting the amplitude and timing of the following cycle. For example, the time of the occurrence of sunspot minimum sets the length of the previous cycle, which is correlated by the amplitude-period effect to the amplitude of the next cycle, with cycles of shorter (longer) than average length usually being followed by cycles of larger (smaller) than average size (true for 16 of 21 sunspot cycles). Likewise, the size of the minimum at cycle onset is correlated with the size of the cycle's maximum amplitude, with cycles of larger (smaller) than average size minima usually being associated with larger (smaller) than average size maxima (true for 16 of 22 sunspot cycles). Also, it was found that the size of the previous cycle's minimum and maximum relates to the size of the following cycle's minimum and maximum with an even-odd cycle number dependency. The latter effect suggests that cycle 23 will have a minimum and maximum amplitude probably larger than average in size (in particular, minimum smoothed sunspot number Rm = 12.3 +/- 7.5 and maximum smoothed sunspot number RM = 198.8 +/- 36.5, at the 95-percent level of confidence), further suggesting (by the Waldmeier effect) that it will have a faster than average rise to maximum (fast-rising cycles have ascent durations of about 41 +/- 7 months). Thus, if, as expected, onset for cycle 23 will be December 1996 +/- 3 months, based on smoothed sunspot number, then the length of cycle 22 will be about 123 +/- 3 months, inferring that it is a short-period cycle and that cycle 23 maximum amplitude probably will be larger than average in size (from the amplitude-period effect), having an RM of about 133 +/- 39 (based on the usual +/- 30 percent spread that has been seen between observed and predicted values), with maximum amplitude occurrence likely sometime between July 1999 and October 2000.

  12. Thin-plate spline analysis of craniofacial growth in Class I and Class II subjects.

    PubMed

    Franchi, Lorenzo; Baccetti, Tiziano; Stahl, Franka; McNamara, James A

    2007-07-01

    To compare the craniofacial growth characteristics of untreated subjects with Class II division 1 malocclusion with those of subjects with normal (Class I) occlusion from the prepubertal through the postpubertal stages of development. The Class II division 1 sample consisted of 17 subjects (11 boys and six girls). The Class I sample also consisted of 17 subjects (13 boys and four girls). Three craniofacial regions (cranial base, maxilla, and mandible) were analyzed on the lateral cephalograms of the subjects in both groups by means of thin-plate spline analysis at T1 (prepubertal) and T2 (postpubertal). Both cross-sectional and longitudinal comparisons were performed on both size and shape differences between the two groups. The results showed an increased cranial base angulation as a morphological feature of Class II malocclusion at the prepubertal developmental phase. Maxillary changes in either shape or size were not significant. Subjects with Class II malocclusion exhibited a significant deficiency in the size of the mandible at the completion of active craniofacial growth as compared with Class I subjects. A significant deficiency in the size of the mandible became apparent in Class II subjects during the circumpubertal period and it was still present at the completion of active craniofacial growth.

  13. Protograph LDPC Codes Over Burst Erasure Channels

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush; Dolinar, Sam; Jones, Christopher

    2006-01-01

    In this paper we design high rate protograph based LDPC codes suitable for binary erasure channels. To simplify the encoder and decoder implementation for high data rate transmission, the structure of codes are based on protographs and circulants. These LDPC codes can improve data link and network layer protocols in support of communication networks. Two classes of codes were designed. One class is designed for large block sizes with an iterative decoding threshold that approaches capacity of binary erasure channels. The other class is designed for short block sizes based on maximizing minimum stopping set size. For high code rates and short blocks the second class outperforms the first class.

  14. Class-Size Reduction Program Evaluation, 2001-02. A Report to the North Carolina Department of Public Instruction.

    ERIC Educational Resources Information Center

    Speas, Carol

    In 2001-2002, 23 schools in the Wake County Public School System (WCPSS), North Carolina, were provided with 40 teacher positions through the Class Size Reduction Program (CSR). Achievement results for students in reduced class sizes were compared with those of similar students in other CSR schools who did not choose the same grade for the project…

  15. Early Elementary Class-Size Reduction: A Neo-Institutional Analysis of the Social, Political, and Economic Influences on State-Level Policymaking.

    ERIC Educational Resources Information Center

    Mitchell, Ross E.

    This paper examines the social, political, and economic factors that influenced the adoption and diffusion of early-elementary school class-size-reduction policies at the state level. It applies a neo-institutional framework to explain the rapid spread of class-size reduction policies throughout many state legislatures and boards of education. It…

  16. Class Size and Student Performance at a Public Research University: A Cross-Classified Model

    ERIC Educational Resources Information Center

    Johnson, Iryna Y.

    2010-01-01

    This study addresses several methodological problems that have confronted prior research on the effect of class size on student achievement. Unlike previous studies, this analysis accounts for the hierarchical data structure of student achievement, where grades are nested within classes and students, and considers a wide range of class sizes…

  17. Svetlichny's inequality and genuine tripartite nonlocality in three-qubit pure states

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ajoy, Ashok; NMR Research Centre, Indian Institute of Science, Bangalore 560012; Rungta, Pranaw

    2010-05-15

    The violation of the Svetlichny's inequality (SI) [Phys. Rev. D 35, 3066 (1987)] is sufficient but not necessary for genuine tripartite nonlocal correlations. Here we quantify the relationship between tripartite entanglement and the maximum expectation value of the Svetlichny operator (which is bounded from above by the inequality) for the two inequivalent subclasses of pure three-qubit states: the Greenberger-Horne-Zeilinger (GHZ) class and the W class. We show that the maximum for the GHZ-class states reduces to Mermin's inequality [Phys. Rev. Lett. 65, 1838 (1990)] modulo a constant factor, and although it is a function of the three tangle and themore » residual concurrence, large numbers of states do not violate the inequality. We further show that by design SI is more suitable as a measure of genuine tripartite nonlocality between the three qubits in the W-class states, and the maximum is a certain function of the bipartite entanglement (the concurrence) of the three reduced states, and only when their sum attains a certain threshold value do they violate the inequality.« less

  18. Modelling the variation in skin-test tuberculin reactions, post-mortem lesion counts and case pathology in tuberculosis-exposed cattle: Effects of animal characteristics, histories and co-infection.

    PubMed

    Byrne, A W; Graham, J; Brown, C; Donaghy, A; Guelbenzu-Gonzalo, M; McNair, J; Skuce, R A; Allen, A; McDowell, S W

    2018-06-01

    Correctly identifying bovine tuberculosis (bTB) in cattle remains a significant problem in endemic countries. We hypothesized that animal characteristics (sex, age, breed), histories (herd effects, testing, movement) and potential exposure to other pathogens (co-infection; BVDV, liver fluke and Mycobacterium avium reactors) could significantly impact the immune responsiveness detected at skin testing and the variation in post-mortem pathology (confirmation) in bTB-exposed cattle. Three model suites were developed using a retrospective observational data set of 5,698 cattle culled during herd breakdowns in Northern Ireland. A linear regression model suggested that antemortem tuberculin reaction size (difference in purified protein derivative avium [PPDa] and bovine [PPDb] reactions) was significantly positively associated with post-mortem maximum lesion size and the number of lesions found. This indicated that reaction size could be considered a predictor of both the extent (number of lesions/tissues) and the pathological progression of infection (maximum lesion size). Tuberculin reaction size was related to age class, and younger animals (<2.85 years) displayed larger reaction sizes than older animals. Tuberculin reaction size was also associated with breed and animal movement and increased with the time between the penultimate and disclosing tests. A negative binomial random-effects model indicated a significant increase in lesion counts for animals with M. avium reactions (PPDb-PPDa < 0) relative to non-reactors (PPDb-PPDa = 0). Lesion counts were significantly increased in animals with previous positive severe interpretation skin-test results. Animals with increased movement histories, young animals and non-dairy breed animals also had significantly increased lesion counts. Animals from herds that had BVDV-positive cattle had significantly lower lesion counts than animals from herds without evidence of BVDV infection. Restricting the data set to only animals with a bTB visible lesion at slaughter (n = 2471), an ordinal regression model indicated that liver fluke-infected animals disclosed smaller lesions, relative to liver fluke-negative animals, and larger lesions were disclosed in animals with increased movement histories. © 2018 Blackwell Verlag GmbH.

  19. Research of facial feature extraction based on MMC

    NASA Astrophysics Data System (ADS)

    Xue, Donglin; Zhao, Jiufen; Tang, Qinhong; Shi, Shaokun

    2017-07-01

    Based on the maximum margin criterion (MMC), a new algorithm of statistically uncorrelated optimal discriminant vectors and a new algorithm of orthogonal optimal discriminant vectors for feature extraction were proposed. The purpose of the maximum margin criterion is to maximize the inter-class scatter while simultaneously minimizing the intra-class scatter after the projection. Compared with original MMC method and principal component analysis (PCA) method, the proposed methods are better in terms of reducing or eliminating the statistically correlation between features and improving recognition rate. The experiment results on Olivetti Research Laboratory (ORL) face database shows that the new feature extraction method of statistically uncorrelated maximum margin criterion (SUMMC) are better in terms of recognition rate and stability. Besides, the relations between maximum margin criterion and Fisher criterion for feature extraction were revealed.

  20. Mixture class recovery in GMM under varying degrees of class separation: frequentist versus Bayesian estimation.

    PubMed

    Depaoli, Sarah

    2013-06-01

    Growth mixture modeling (GMM) represents a technique that is designed to capture change over time for unobserved subgroups (or latent classes) that exhibit qualitatively different patterns of growth. The aim of the current article was to explore the impact of latent class separation (i.e., how similar growth trajectories are across latent classes) on GMM performance. Several estimation conditions were compared: maximum likelihood via the expectation maximization (EM) algorithm and the Bayesian framework implementing diffuse priors, "accurate" informative priors, weakly informative priors, data-driven informative priors, priors reflecting partial-knowledge of parameters, and "inaccurate" (but informative) priors. The main goal was to provide insight about the optimal estimation condition under different degrees of latent class separation for GMM. Results indicated that optimal parameter recovery was obtained though the Bayesian approach using "accurate" informative priors, and partial-knowledge priors showed promise for the recovery of the growth trajectory parameters. Maximum likelihood and the remaining Bayesian estimation conditions yielded poor parameter recovery for the latent class proportions and the growth trajectories. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

  1. The Implication of Large Class Size in the Teaching and Learning of Business Education in Tertiary Institution in Ekiti State

    ERIC Educational Resources Information Center

    Ayeni, Olapade Grace; Olowe, Modupe Oluwatoyin

    2016-01-01

    Large class size is one of the problems in the educational sector that developing nations have been grappling with. Nigeria as a developing nation is no exception. The purpose of this study is to provide views of both lecturers and students on large class size and how it affects teaching and learning in tertiary institutions in Ekiti State of…

  2. Environmental influences and ontogenetic differences in vertical habitat use of black marlin (Istiompax indica) in the southwestern Pacific

    PubMed Central

    Tracey, Sean R.; Pepperell, Julian G.; Domeier, Michael L.; Bennett, Michael B.

    2017-01-01

    The black marlin (Istiompax indica) is a highly migratory billfish that occupies waters throughout the tropical and subtropical Indo-Pacific. To characterize the vertical habitat use of I. indica, we examined the temperature-depth profiles collected using 102 pop-up satellite archival tags deployed off the east coast of Australia. Modelling of environmental variables revealed location, sea-surface height deviation, mixed layer depth and dissolved oxygen to all be significant predictors of vertical habitat use. Distinct differences in diel movements were observed between the size classes, with larger size classes of marlin (greater than 50 kg) undertaking predictable bounce-diving activity during daylight hours, while diving behaviour of the smallest size class occurred randomly during both day and night. Overall, larger size classes of I. indica were found to use an increased thermal range and spend more time in waters below 150 m than fish of smaller size classes. The differences in the diving behaviour among size classes were suggested to reflect ontogenetic differences in foraging behaviour or physiology. The findings of this study demonstrate, for the first time to our knowledge, ontogenetic differences in vertical habitat in a species of billfish, and further the understanding of pelagic fish ecophysiology in the presence of global environmental change. PMID:29291060

  3. Reactor vessels: weld cladding - base metal interaction

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mager, T.R.; Landerman, E.; Kubit, C.J.

    1971-07-01

    An underclad anomaly first observed during magnetic particle inspection of a European steam generator and subsequently discovered during inspection of certain reactor vessels manufactured in both the United States and in Europe is shown to be inconsequential for the intended application because of its small size and insignificant expected growth. Metallurgical investigation identifies the anomaly as grain boundary separations in the base metal, restricted in extent to the grain coarsened part of the weld heat-affected zone beneath the weld bead overlap. In all cases the depth of the separations was less than the maximum depth (0.125 inches) of the grainmore » coarsened area. The occurrence of the anomaly depends on the specific weld overlay process. It has been found generally after post-weld stress relief in forging and plate material (SA508 Class 2 composition). Fracture mechanics evaluation of the affected materials shows that the expected growth of the grain boundary separations during the lifetime of the plant is insignificant, being only 0.004 inches maximum as calculated based on conservative assumptions verified by the metallurgical investigation. Since the original size of the grain boundary separations is negligible and its growth is insignificant during the 40-year plant life, the structural integrity of the vessels has not been compromised and the affected vessels are suitable for the use intended.« less

  4. Bioinformatics analysis of disordered proteins in prokaryotes.

    PubMed

    Pavlović-Lažetić, Gordana M; Mitić, Nenad S; Kovačević, Jovana J; Obradović, Zoran; Malkov, Saša N; Beljanski, Miloš V

    2011-03-02

    A significant number of proteins have been shown to be intrinsically disordered, meaning that they lack a fixed 3 D structure or contain regions that do not posses a well defined 3 D structure. It has also been proven that a protein's disorder content is related to its function. We have performed an exhaustive analysis and comparison of the disorder content of proteins from prokaryotic organisms (i.e., superkingdoms Archaea and Bacteria) with respect to functional categories they belong to, i.e., Clusters of Orthologous Groups of proteins (COGs) and groups of COGs-Cellular processes (Cp), Information storage and processing (Isp), Metabolism (Me) and Poorly characterized (Pc). We also analyzed the disorder content of proteins with respect to various genomic, metabolic and ecological characteristics of the organism they belong to. We used correlations and association rule mining in order to identify the most confident associations between specific modalities of the characteristics considered and disorder content. Bacteria are shown to have a somewhat higher level of protein disorder than archaea, except for proteins in the Me functional group. It is demonstrated that the Isp and Cp functional groups in particular (L-repair function and N-cell motility and secretion COGs of proteins in specific) possess the highest disorder content, while Me proteins, in general, posses the lowest. Disorder fractions have been confirmed to have the lowest level for the so-called order-promoting amino acids and the highest level for the so-called disorder promoters. For each pair of organism characteristics, specific modalities are identified with the maximum disorder proteins in the corresponding organisms, e.g., high genome size-high GC content organisms, facultative anaerobic-low GC content organisms, aerobic-high genome size organisms, etc. Maximum disorder in archaea is observed for high GC content-low genome size organisms, high GC content-facultative anaerobic or aquatic or mesophilic organisms, etc. Maximum disorder in bacteria is observed for high GC content-high genome size organisms, high genome size-aerobic organisms, etc. Some of the most reliable association rules mined establish relationships between high GC content and high protein disorder, medium GC content and both medium and low protein disorder, anaerobic organisms and medium protein disorder, Gammaproteobacteria and low protein disorder, etc. A web site Prokaryote Disorder Database has been designed and implemented at the address http://bioinfo.matf.bg.ac.rs/disorder, which contains complete results of the analysis of protein disorder performed for 296 prokaryotic completely sequenced genomes. Exhaustive disorder analysis has been performed by functional classes of proteins, for a larger dataset of prokaryotic organisms than previously done. Results obtained are well correlated to those previously published, with some extension in the range of disorder level and clear distinction between functional classes of proteins. Wide correlation and association analysis between protein disorder and genomic and ecological characteristics has been performed for the first time. The results obtained give insight into multi-relationships among the characteristics and protein disorder. Such analysis provides for better understanding of the evolutionary process and may be useful for taxon determination. The main drawback of the approach is the fact that the disorder considered has been predicted and not experimentally established.

  5. Growth and Maximum Size of Tiger Sharks (Galeocerdo cuvier) in Hawaii

    PubMed Central

    Meyer, Carl G.; O'Malley, Joseph M.; Papastamatiou, Yannis P.; Dale, Jonathan J.; Hutchinson, Melanie R.; Anderson, James M.; Royer, Mark A.; Holland, Kim N.

    2014-01-01

    Tiger sharks (Galecerdo cuvier) are apex predators characterized by their broad diet, large size and rapid growth. Tiger shark maximum size is typically between 380 & 450 cm Total Length (TL), with a few individuals reaching 550 cm TL, but the maximum size of tiger sharks in Hawaii waters remains uncertain. A previous study suggested tiger sharks grow rather slowly in Hawaii compared to other regions, but this may have been an artifact of the method used to estimate growth (unvalidated vertebral ring counts) compounded by small sample size and narrow size range. Since 1993, the University of Hawaii has conducted a research program aimed at elucidating tiger shark biology, and to date 420 tiger sharks have been tagged and 50 recaptured. All recaptures were from Hawaii except a single shark recaptured off Isla Jacques Cousteau (24°13′17″N 109°52′14″W), in the southern Gulf of California (minimum distance between tag and recapture sites  =  approximately 5,000 km), after 366 days at liberty (DAL). We used these empirical mark-recapture data to estimate growth rates and maximum size for tiger sharks in Hawaii. We found that tiger sharks in Hawaii grow twice as fast as previously thought, on average reaching 340 cm TL by age 5, and attaining a maximum size of 403 cm TL. Our model indicates the fastest growing individuals attain 400 cm TL by age 5, and the largest reach a maximum size of 444 cm TL. The largest shark captured during our study was 464 cm TL but individuals >450 cm TL were extremely rare (0.005% of sharks captured). We conclude that tiger shark growth rates and maximum sizes in Hawaii are generally consistent with those in other regions, and hypothesize that a broad diet may help them to achieve this rapid growth by maximizing prey consumption rates. PMID:24416287

  6. Growth and maximum size of tiger sharks (Galeocerdo cuvier) in Hawaii.

    PubMed

    Meyer, Carl G; O'Malley, Joseph M; Papastamatiou, Yannis P; Dale, Jonathan J; Hutchinson, Melanie R; Anderson, James M; Royer, Mark A; Holland, Kim N

    2014-01-01

    Tiger sharks (Galecerdo cuvier) are apex predators characterized by their broad diet, large size and rapid growth. Tiger shark maximum size is typically between 380 & 450 cm Total Length (TL), with a few individuals reaching 550 cm TL, but the maximum size of tiger sharks in Hawaii waters remains uncertain. A previous study suggested tiger sharks grow rather slowly in Hawaii compared to other regions, but this may have been an artifact of the method used to estimate growth (unvalidated vertebral ring counts) compounded by small sample size and narrow size range. Since 1993, the University of Hawaii has conducted a research program aimed at elucidating tiger shark biology, and to date 420 tiger sharks have been tagged and 50 recaptured. All recaptures were from Hawaii except a single shark recaptured off Isla Jacques Cousteau (24°13'17″N 109°52'14″W), in the southern Gulf of California (minimum distance between tag and recapture sites  =  approximately 5,000 km), after 366 days at liberty (DAL). We used these empirical mark-recapture data to estimate growth rates and maximum size for tiger sharks in Hawaii. We found that tiger sharks in Hawaii grow twice as fast as previously thought, on average reaching 340 cm TL by age 5, and attaining a maximum size of 403 cm TL. Our model indicates the fastest growing individuals attain 400 cm TL by age 5, and the largest reach a maximum size of 444 cm TL. The largest shark captured during our study was 464 cm TL but individuals >450 cm TL were extremely rare (0.005% of sharks captured). We conclude that tiger shark growth rates and maximum sizes in Hawaii are generally consistent with those in other regions, and hypothesize that a broad diet may help them to achieve this rapid growth by maximizing prey consumption rates.

  7. Smaller predator-prey body size ratios in longer food chains.

    PubMed Central

    Jennings, Simon; Warr, Karema J

    2003-01-01

    Maximum food-chain length has been correlated with resource availability, ecosystem size, environmental stability and colonization history. Some of these correlations may result from environmental effects on predator-prey body size ratios. We investigate relationships between maximum food-chain length, predator-prey mass ratios, primary production and environmental stability in marine food webs with a natural history of community assembly. Our analyses provide empirical evidence that smaller mean predator-prey body size ratios are characteristic of more stable environments and that food chains are longer when mean predator-prey body size ratios are small. We conclude that environmental effects on predator-prey body size ratios contribute to observed differences in maximum food-chain length. PMID:12965034

  8. No-Enclave Percolation Corresponds to Holes in the Cluster Backbone.

    PubMed

    Hu, Hao; Ziff, Robert M; Deng, Youjin

    2016-10-28

    The no-enclave percolation (NEP) model introduced recently by Sheinman et al. can be mapped to a problem of holes within a standard percolation backbone, and numerical measurements of such holes give the same size-distribution exponent τ=1.82(1) as found for the NEP model. An argument is given that τ=1+d_{B}/2≈1.822 for backbone holes, where d_{B} is the backbone dimension. On the other hand, a model of simple holes within a percolation cluster yields τ=1+d_{f}/2=187/96≈1.948, where d_{f} is the fractal dimension of the cluster, and this value is consistent with the experimental results of gel collapse of Sheinman et al., which give τ=1.91(6). This suggests that the gel clusters are of the universality class of percolation cluster holes. Both models give a discontinuous maximum hole size at p_{c}, signifying explosive percolation behavior.

  9. Age- and size-related changes in physiological characteristics and chemical composition of Acer pseudoplatanus and Fraxinus excelsior trees.

    PubMed

    Abdul-Hamid, Hazandy; Mencuccini, Maurizio

    2009-01-01

    Forest growth is an important factor both economically and ecologically, and it follows a predictable trend with age. Generally, growth accelerates as canopies develop in young forests and declines substantially soon after maximum leaf area is attained. The causes of this decline are multiple and may be linked to age- or size-related processes, or both. Our objective was to determine the relative effects of tree age and tree size on the physiological attributes of two broadleaf species. As age and size are normally coupled during growth, an approach based on grafting techniques to separate the effects of size from those of age was adopted. Genetically identical grafted seedlings were produced from scions taken from trees of four age classes, ranging from 4 to 162 years. We found that leaf-level net photosynthetic rate per unit of leaf mass and some other leaf structural and biochemical characteristics had decreased substantially with increasing size of the donor trees in the field, whereas other gas exchange parameters expressed on a leaf area basis did not. In contrast, these parameters remained almost constant in grafted seedlings, i.e., scions taken from donor trees with different meristematic ages show no age-related trend after they were grafted onto young rootstocks. In general, the results suggested that size-related limitations triggered the declines in photosynthate production and tree growth, whereas less evidence was found to support a role of meristematic age.

  10. Variations in tooth size and arch dimensions in Malay schoolchildren.

    PubMed

    Hussein, Khalid W; Rajion, Zainul A; Hassan, Rozita; Noor, Siti Noor Fazliah Mohd

    2009-11-01

    To compare the mesio-distal tooth sizes and dental arch dimensions in Malay boys and girls with Class I, Class II and Class III malocclusions. The dental casts of 150 subjects (78 boys, 72 girls), between 12 and 16 years of age, with Class I, Class II and Class III malocclusions were used. Each group consisted of 50 subjects. An electronic digital caliper was used to measure the mesio-distal tooth sizes of the upper and lower permanent teeth (first molar to first molar), the intercanine and intermolar widths. The arch lengths and arch perimeters were measured with AutoCAD software (Autodesk Inc., San Rafael, CA, U.S.A.). The mesio-distal dimensions of the upper lateral incisors and canines in the Class I malocclusion group were significantly smaller than the corresponding teeth in the Class III and Class II groups, respectively. The lower canines and first molars were significantly smaller in the Class I group than the corresponding teeth in the Class II group. The lower intercanine width was significantly smaller in the Class II group as compared with the Class I group, and the upper intermolar width was significantly larger in Class III group as compared with the Class II group. There were no significant differences in the arch perimeters or arch lengths. The boys had significantly wider teeth than the girls, except for the left lower second premolar. The boys also had larger upper and lower intermolar widths and lower intercanine width than the girls. Small, but statistically significant, differences in tooth sizes are not necessarily accompanied by significant arch width, arch length or arch perimeter differences. Generally, boys have wider teeth, larger lower intercanine width and upper and lower intermolar widths than girls.

  11. 78 FR 60745 - Hazardous Materials: Minor Editorial Corrections and Clarifications (RRR)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-02

    ... 173.62 This section provides packaging instructions for Class 1 explosive materials. Paragraph (b) of... requirements for approval of special form Class 7 (radioactive) materials. Paragraph (d) of this section notes... activity of special form Class 7 (radioactive) material permitted in a Type A package equals the maximum...

  12. Measurement and Structural Model Class Separation in Mixture CFA: ML/EM versus MCMC

    ERIC Educational Resources Information Center

    Depaoli, Sarah

    2012-01-01

    Parameter recovery was assessed within mixture confirmatory factor analysis across multiple estimator conditions under different simulated levels of mixture class separation. Mixture class separation was defined in the measurement model (through factor loadings) and the structural model (through factor variances). Maximum likelihood (ML) via the…

  13. Class Size Reduction and Urban Students. ERIC Digest.

    ERIC Educational Resources Information Center

    Schwartz, Wendy

    Researchers have long investigated whether smaller classes improve student achievement. Their conclusions suggest that class size reduction (CSR) can result in greater in-depth coverage of subject matter by teachers, enhanced learning and stronger engagement by students, more personalized teacher-student relationships, and safer schools with fewer…

  14. The Impact of a Universal Class-Size Reduction Policy: Evidence from Florida's Statewide Mandate. Program on Education Policy and Governance Working Papers Series. PEPG 10-03

    ERIC Educational Resources Information Center

    Chingos, Matthew M.

    2010-01-01

    Class-size reduction (CSR) mandates presuppose that resources provided to reduce class size will have a larger impact on student outcomes than resources that districts can spend as they see fit. I estimate the impact of Florida's statewide CSR policy by comparing the deviations from prior achievement trends in districts that were required to…

  15. An Analysis of the Effects of Class Size on Student Achievement in Selected Middle Schools in the Sandhills Region of North Carolina

    ERIC Educational Resources Information Center

    Maples, Jeffrey B.

    2009-01-01

    The purpose of this study was to analyze the effects of class size and student achievement in mathematics and reading. The study focused on grades 6 through 8 and used the results of the North Carolina EOG tests in mathematics and reading for the academic year 2006-2007. This study examined the effects of class size and student achievement in…

  16. Longitudinal Effects of Class Size Reductions on Attainment: Results from Hong Kong Primary Classrooms

    ERIC Educational Resources Information Center

    Galton, Maurice; Pell, Tony

    2012-01-01

    In a four-year study of the effect of class size on pupil outcomes in a sample of 36 primary schools in Hong Kong, it has been found that there are few positive differences in attainment between classes set at less than 25 pupils and those of normal size averaging 38. Three cohorts of pupils were studied. In Cohort 1 pupils spent 3 years in small…

  17. Class Size Effects on Literacy Skills and Literacy Interest in First Grade: A Large-Scale Investigation

    ERIC Educational Resources Information Center

    Ecalle, Jean; Magnan, Annie; Gibert, Fabienne

    2006-01-01

    This article examines the impact of class size on literacy skills and on literacy interest in beginning readers from zones with specific educational needs in France. The data came from an experiment involving first graders in which teachers and pupils were randomly assigned to the different class types (small classes of 10-12 pupils vs. regular…

  18. The Effect of Large Classes on English Teaching and Learning in Saudi Secondary Schools

    ERIC Educational Resources Information Center

    Bahanshal, Dalal A.

    2013-01-01

    The effect of class size on teaching and learning English as a foreign language (EFL) has been through a contentious debate among researchers for a long time. Before the 1950's the concern about the effect of class size and the learning outcomes of students in such classes waned for some time. Yet, researchers have reconsidered the case once again…

  19. The French press: a repeatable and high-throughput approach to exercising zebrafish (Danio rerio).

    PubMed

    Usui, Takuji; Noble, Daniel W A; O'Dea, Rose E; Fangmeier, Melissa L; Lagisz, Malgorzata; Hesselson, Daniel; Nakagawa, Shinichi

    2018-01-01

    Zebrafish are increasingly used as a vertebrate model organism for various traits including swimming performance, obesity and metabolism, necessitating high-throughput protocols to generate standardized phenotypic information. Here, we propose a novel and cost-effective method for exercising zebrafish, using a coffee plunger and magnetic stirrer. To demonstrate the use of this method, we conducted a pilot experiment to show that this simple system provides repeatable estimates of maximal swim performance (intra-class correlation [ICC] = 0.34-0.41) and observe that exercise training of zebrafish on this system significantly increases their maximum swimming speed. We propose this high-throughput and reproducible system as an alternative to traditional linear chamber systems for exercising zebrafish and similarly sized fishes.

  20. The French press: a repeatable and high-throughput approach to exercising zebrafish (Danio rerio)

    PubMed Central

    Usui, Takuji; Noble, Daniel W.A.; O’Dea, Rose E.; Fangmeier, Melissa L.; Lagisz, Malgorzata; Hesselson, Daniel

    2018-01-01

    Zebrafish are increasingly used as a vertebrate model organism for various traits including swimming performance, obesity and metabolism, necessitating high-throughput protocols to generate standardized phenotypic information. Here, we propose a novel and cost-effective method for exercising zebrafish, using a coffee plunger and magnetic stirrer. To demonstrate the use of this method, we conducted a pilot experiment to show that this simple system provides repeatable estimates of maximal swim performance (intra-class correlation [ICC] = 0.34–0.41) and observe that exercise training of zebrafish on this system significantly increases their maximum swimming speed. We propose this high-throughput and reproducible system as an alternative to traditional linear chamber systems for exercising zebrafish and similarly sized fishes. PMID:29372124

  1. Why Does Rebalancing Class-Unbalanced Data Improve AUC for Linear Discriminant Analysis?

    PubMed

    Xue, Jing-Hao; Hall, Peter

    2015-05-01

    Many established classifiers fail to identify the minority class when it is much smaller than the majority class. To tackle this problem, researchers often first rebalance the class sizes in the training dataset, through oversampling the minority class or undersampling the majority class, and then use the rebalanced data to train the classifiers. This leads to interesting empirical patterns. In particular, using the rebalanced training data can often improve the area under the receiver operating characteristic curve (AUC) for the original, unbalanced test data. The AUC is a widely-used quantitative measure of classification performance, but the property that it increases with rebalancing has, as yet, no theoretical explanation. In this note, using Gaussian-based linear discriminant analysis (LDA) as the classifier, we demonstrate that, at least for LDA, there is an intrinsic, positive relationship between the rebalancing of class sizes and the improvement of AUC. We show that the largest improvement of AUC is achieved, asymptotically, when the two classes are fully rebalanced to be of equal sizes.

  2. Connecting in Class? College Class Size and Inequality in Academic Social Capital

    ERIC Educational Resources Information Center

    Beattie, Irenee R.; Thiele, Megan

    2016-01-01

    College students who interact with professors and peers about academic matters have better college outcomes. Although institutional factors influence engagement, prior scholarship has not systematically examined whether class sizes affect students' academic interactions, nor whether race or first-generation status moderate such effects. We…

  3. The Allocation of Teachers in Schools--An Alternative to the Class Size Dialogue.

    ERIC Educational Resources Information Center

    Loader, David N.

    1978-01-01

    This article looks beyond class size to such specifics as teachers' load, subject electives available, subject load, and different class groupings in developing a flow chart that gives added understanding and control over the variables relating to the deployment of teachers. (Author/IRT)

  4. Making Class Size Work in the Middle Grades

    ERIC Educational Resources Information Center

    Tienken, C. H.; Achilles, C. M.

    2006-01-01

    Most research on the positive effects of class-size reduction (CSR) has occurred in the elementary level (Word, Johnston, Bain, Fulton, Zaharias, Lintz, Achilles, Folger, & Breda, 1990; Molnar, Smith, Zahorik, Palmer, Halbach, & Ehrle, 1999). Is CSR an important variable in improving education in the middle grades? Can small classes be…

  5. All We Need Is a Little Class.

    ERIC Educational Resources Information Center

    Krieger, Jean D.

    This study was designed to discover the nature of interactions between effective teachers in regular-sized classes with 25 or more students and small-size classes with fewer than 18 students. Eleven public school primary classrooms were observed, and the interactions between the teacher and students were studied. Verbal and nonverbal interactions…

  6. The Non-Cognitive Returns to Class Size

    ERIC Educational Resources Information Center

    Dee, Thomas S.; West, Martin R.

    2011-01-01

    The authors use nationally representative survey data and a research design that relies on contemporaneous within-student and within-teacher comparisons across two academic subjects to estimate how class size affects certain non-cognitive skills in middle school. Their results indicate that smaller eighth-grade classes are associated with…

  7. 49 CFR 173.4 - Small quantities for highway and rail.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... hazard classes, are not subject to any other requirements of this subchapter when— (1) The maximum... a package containing a Class 7 (radioactive) material. (2) With the exception of temperature sensing...

  8. Image classification at low light levels

    NASA Astrophysics Data System (ADS)

    Wernick, Miles N.; Morris, G. Michael

    1986-12-01

    An imaging photon-counting detector is used to achieve automatic sorting of two image classes. The classification decision is formed on the basis of the cross correlation between a photon-limited input image and a reference function stored in computer memory. Expressions for the statistical parameters of the low-light-level correlation signal are given and are verified experimentally. To obtain a correlation-based system for two-class sorting, it is necessary to construct a reference function that produces useful information for class discrimination. An expression for such a reference function is derived using maximum-likelihood decision theory. Theoretically predicted results are used to compare on the basis of performance the maximum-likelihood reference function with Fukunaga-Koontz basis vectors and average filters. For each method, good class discrimination is found to result in milliseconds from a sparse sampling of the input image.

  9. GaN Microwave DC-DC Converters

    NASA Astrophysics Data System (ADS)

    Ramos Franco, Ignacio

    Increasing the operating frequency of switching converters can have a direct impact in the miniaturization and integration of power converters. The size of energy-storage passive components and the difficulty to integrate them with the rest of the circuitry is a major challenge in the development of a fully integrated power supply on a chip. The work presented in this thesis attempts to address some of the difficulties encountered in the design of high-frequency converters by applying concepts and techniques usually used in the design of high-efficiency power amplifiers and high-efficiency rectifiers at microwave frequencies. The main focus is in the analysis, design, and characterization of dc-dc converters operating at microwave frequencies in the low gigahertz range. The concept of PA-rectifier duality, where a high-efficiency power amplifier operates as a high-efficiency rectifier is investigated through non-linear simulations and experimentally validated. Additionally, the concept of a self-synchronous rectifier, where a transistor rectifier operates synchronously without the need of a RF source or driver is demonstrated. A theoretical analysis of a class-E self-synchronous rectifier is presented and validated through non-linear simulations and experiments. Two GaN class-E2 dc-dc converters operating at a switching frequency of 1 and 1.2 GHz are demonstrated. The converters achieve 80 % and 75 % dc-dc efficiency respectively and are among the highest-frequency and highest-efficiency reported in the literature. The application of the concepts established in the analysis of a self-synchronous rectifier to a power amplifier culminated in the development of an oscillating, self-synchronous class-E 2 dc-dc converter. Finally, a proof-of-concept fully integrated GaN MMIC class-E 2 dc-dc converter switching at 4.6 GHz is demonstrated for the first time to the best of our knowledge. The 3.8 mm x 2.6 mm chip contains distributed inductors and does not require any external components. The maximum measured dc-dc efficiency is approximately 45%.

  10. Maximum-entropy description of animal movement.

    PubMed

    Fleming, Chris H; Subaşı, Yiğit; Calabrese, Justin M

    2015-03-01

    We introduce a class of maximum-entropy states that naturally includes within it all of the major continuous-time stochastic processes that have been applied to animal movement, including Brownian motion, Ornstein-Uhlenbeck motion, integrated Ornstein-Uhlenbeck motion, a recently discovered hybrid of the previous models, and a new model that describes central-place foraging. We are also able to predict a further hierarchy of new models that will emerge as data quality improves to better resolve the underlying continuity of animal movement. Finally, we also show that Langevin equations must obey a fluctuation-dissipation theorem to generate processes that fall from this class of maximum-entropy distributions when the constraints are purely kinematic.

  11. Social class and family size as determinants of attributed machismo, femininity, and family planning: a field study in two South American communities.

    PubMed

    Nicassio, P M

    1977-12-01

    A study was conducted to determine the way in which stereotypes of machismo and femininity are associated with family size and perceptions of family planning. A total of 144 adults, male and female, from a lower class and an upper middle class urban area in Colombia were asked to respond to photographs of Colombian families varying in size and state of completeness. The study illustrated the critical role of sex-role identity and sex-role organization as variables having an effect on fertility. The lower-class respondents described parents in the photographs as significantly more macho or feminine because of their children than the upper-middle-class subjects did. Future research should attempt to measure when this drive to sex-role identity is strongest, i.e., when men and women are most driven to reproduce in order to "prove" themselves. Both lower- and upper-middle-class male groups considered male dominance in marriage to be directly linked with family size. Perceptions of the use of family planning decreased linearly with family size for both social groups, although the lower-class females attributed more family planning to spouses of large families than upper-middle-class females. It is suggested that further research deal with the ways in which constructs of machismo and male dominance vary between the sexes and among socioeconomic groups and the ways in which they impact on fertility.

  12. Dynamic relationships between body size, species richness, abundance, and energy use in a shallow marine epibenthic faunal community

    PubMed Central

    Labra, Fabio A; Hernández-Miranda, Eduardo; Quiñones, Renato A

    2015-01-01

    We study the temporal variation in the empirical relationships among body size (S), species richness (R), and abundance (A) in a shallow marine epibenthic faunal community in Coliumo Bay, Chile. We also extend previous analyses by calculating individual energy use (E) and test whether its bivariate and trivariate relationships with S and R are in agreement with expectations derived from the energetic equivalence rule. Carnivorous and scavenger species representing over 95% of sample abundance and biomass were studied. For each individual, body size (g) was measured and E was estimated following published allometric relationships. Data for each sample were tabulated into exponential body size bins, comparing species-averaged values with individual-based estimates which allow species to potentially occupy multiple size classes. For individual-based data, both the number of individuals and species across body size classes are fit by a Weibull function rather than by a power law scaling. Species richness is also a power law of the number of individuals. Energy use shows a piecewise scaling relationship with body size, with energetic equivalence holding true only for size classes above the modal abundance class. Species-based data showed either weak linear or no significant patterns, likely due to the decrease in the number of data points across body size classes. Hence, for individual-based size spectra, the SRA relationship seems to be general despite seasonal forcing and strong disturbances in Coliumo Bay. The unimodal abundance distribution results in a piecewise energy scaling relationship, with small individuals showing a positive scaling and large individuals showing energetic equivalence. Hence, strict energetic equivalence should not be expected for unimodal abundance distributions. On the other hand, while species-based data do not show unimodal SRA relationships, energy use across body size classes did not show significant trends, supporting energetic equivalence. PMID:25691966

  13. The influence of maximum running speed on eye size: a test of Leuckart's Law in mammals.

    PubMed

    Heard-Booth, Amber N; Kirk, E Christopher

    2012-06-01

    Vertebrate eye size is influenced by many factors, including body or head size, diet, and activity pattern. Locomotor speed has also been suggested to influence eye size in a relationship known as Leuckart's Law. Leuckart's Law proposes that animals capable of achieving fast locomotor speeds require large eyes to enhance visual acuity and avoid collisions with environmental obstacles. The selective influence of rapid flight has been invoked to explain the relatively large eyes of birds, but Leuckart's Law remains untested in nonavian vertebrates. This study investigates the relationship between eye size and maximum running speed in a diverse sample of mammals. Measures of axial eye diameter, maximum running speed, and body mass were collected from the published literature for 50 species from 10 mammalian orders. This analysis reveals that absolute eye size is significantly positively correlated with maximum running speed in mammals. Moreover, the relationship between eye size and running speed remains significant when the potentially confounding effects of body mass and phylogeny are statistically controlled. The results of this analysis are therefore consistent with the expectations of Leuckart's Law and demonstrate that faster-moving mammals have larger eyes than their slower-moving close relatives. Accordingly, we conclude that maximum running speed is one of several key selective factors that have influenced the evolution of eye size in mammals. Copyright © 2012 Wiley Periodicals, Inc.

  14. Class size as related to the use of technology, educational practices, and outcomes in Web-based nursing courses.

    PubMed

    Burruss, Nancy M; Billings, Diane M; Brownrigg, Vicki; Skiba, Diane J; Connors, Helen R

    2009-01-01

    With the expanding numbers of nursing students enrolled in Web-based courses and the shortage of faculty, class sizes are increasing. This exploratory descriptive study examined class size in relation to the use of technology and to particular educational practices and outcomes. The sample consisted of undergraduate (n = 265) and graduate (n = 863) students enrolled in fully Web-based nursing courses. The Evaluating Educational Uses of Web-based Courses in Nursing survey (Billings, D., Connors, H., Skiba, D. (2001). Benchmarking best practices in Web-based nursing courses. Advances in Nursing Science, 23, 41--52) and the Social Presence Scale (Gunawardena, C. N., Zittle, F. J. (1997). Social presence as a predictor of satisfaction within a computer-mediated conferencing environment. The American Journal of Distance Education, 11, 9-26.) were used to gather data about the study variables. Class sizes were defined as very small (1 to 10 students), small (11 to 20 students), medium (21 to 30 students), large (31 to 40 students), and very large (41 students and above). Descriptive and inferential statistics were used to analyze the data. There were significant differences by class size in students' perceptions of active participation in learning, student-faculty interaction, peer interaction, and connectedness. Some differences by class size between undergraduate and graduate students were also found, and these require further study.

  15. Stomata open at night in pole-sized and mature ponderosa pine: implications for O3 exposure metrics.

    PubMed

    Grulke, N E; Alonso, R; Nguyen, T; Cascio, C; Dobrowolski, W

    2004-09-01

    Ponderosa pine (Pinus ponderosa Dougl. ex Laws.) is widely distributed in the western USA. We report the lack of stomatal closure at night in early summer for ponderosa pine at two of three sites investigated. Trees at a third site with lower nitrogen dioxide and nitric acid exposure, but greater drought stress, had slightly open stomata at night in early summer but closed stomata at night for the rest of the summer. The three sites had similar background ozone exposure during the summer of measurement (2001). Nighttime stomatal conductance (gs) ranged from one tenth to one fifth that of maximum daytime values. In general, pole-sized trees (< 40 years old) had greater nighttime gs than mature trees (> 250 years old). In late summer, nighttime gs was low (< 3.0 mmol H2O m(-2) s(-1)) for both tree size classes at all sites. Measurable nighttime gs has also been reported in other conifers, but the values we observed were higher. In June, nighttime ozone (O3) uptake accounted for 9, 5 and 3% of the total daily O3 uptake of pole-sized trees from west to east across the San Bernardino Mountains. In late summer, O3 uptake at night was < 2% of diel uptake at all sites. Nocturnal O3 uptake may contribute to greater oxidant injury development, especially in pole-sized trees in early summer.

  16. Do Class Size Reductions Make a Difference to Classroom Practice? The Case of Hong Kong Primary Schools

    ERIC Educational Resources Information Center

    Galton, Maurice; Pell, Tony

    2012-01-01

    This paper describes changes which took place in 37 Hong Kong primary schools where class sizes were reduced from 38 to between 20 and 25. Chinese, English and mathematics classes were observed over three years from Primary 1 (aged 6) to Primary 3. For 75% of observations no child was the focus of the teacher's attention in large classes. Reducing…

  17. Variability of the occurrence frequency of solar flares as a function of peak hard X-ray rate

    NASA Technical Reports Server (NTRS)

    Bai, T.

    1993-01-01

    We study the occurrence frequency of solar flares as a function of the hard X-ray peak count rate, using observations of the Solar Maximum Mission. The size distributions are well represented by power-law distributions with negative indices. As a better alternative to the conventional method, we devise a maximum likelihood method of determining the power-law index of the size distribution. We find that the power-law index of the size distribution changes with time and with the phase of the 154-day periodicity. The size distribution is steeper during the maximum years of solar cycle 21 (1980 and 1981) than during the declining phase (1982-1984). The size distribution, however, is flatter during the maximum phase of the 154-day periodicity than during the minimum phase. The implications of these findings are discussed.

  18. Computer Applications in Class and Transportation Scheduling. Educational Management Review Series Number 1.

    ERIC Educational Resources Information Center

    Piele, Philip K.

    This document shows how computer technology can aid educators in meeting demands for improved class scheduling and more efficient use of transportation resources. The first section surveys literature on operational systems that provide individualized scheduling for students, varied class structures, and maximum use of space and staff skills.…

  19. A Class of Factor Analysis Estimation Procedures with Common Asymptotic Sampling Properties

    ERIC Educational Resources Information Center

    Swain, A. J.

    1975-01-01

    Considers a class of estimation procedures for the factor model. The procedures are shown to yield estimates possessing the same asymptotic sampling properties as those from estimation by maximum likelihood or generalized last squares, both special members of the class. General expressions for the derivatives needed for Newton-Raphson…

  20. Performance of rumpon-based tuna fishery in the Fishing Port of Sendangbiru, Malang, Indonesia

    NASA Astrophysics Data System (ADS)

    Wiadnya, D. G. R.; Damora, A.; Tamanyira, M. M.; Nugroho, D.; Darmawan, A.

    2018-03-01

    Catch records on FADs-based tuna fishery (hand-line) in the southern of East Java was conducted in fishing base of Sendangbiru, from February 2016 to May 2017. Total 45 rumpon (FADs) were found within space area of 64,081 square nautical miles, with average between FADs distant of 25 nautical miles. All FADs were located outside Fisheries Management Areas, except one FAD of code 31. Hand-line fishery was designed for a maximum fishing trip of 14 days. Total catch biomass mainly determined fishing trip. When catch exceeded 1,000 kg, fishermen tend to turn back although with < 10 days fishing trip. Yellowfin tuna and skipjacks were two main species that formed total catch with average catch biomass varied amongst 425–1,360 kg trip-1. Apart from baby-tuna, yellowfin tuna and albacore within catch were at size class higher than its first maturity stage. However, length-class of skipjack indicated that it still in immature stage. Despite of FAD license, Ministry of Marine Affairs and Fisheries neither informed nor aware the position of these FADs.

  1. 40 CFR 147.1803 - Existing Class I and III wells authorized by rule-maximum injection pressure.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... authorized by rule-maximum injection pressure. 147.1803 Section 147.1803 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED...—maximum injection pressure. The owner or operator shall limit injection pressure to the lesser of: (a) A...

  2. Life in the salinity gradient: Discovering mechanisms behind a new biodiversity pattern

    NASA Astrophysics Data System (ADS)

    Telesh, Irena; Schubert, Hendrik; Skarlato, Sergei

    2013-12-01

    A recently discovered paradoxical maximum of planktonic protistan species in the salinity gradient of the Baltic Sea revealed an inverse trend of species number/salinity relation in comparison to the previously accepted species-minimum model for macrozoobenthos. Here, we review long-term data on organisms of different size classes and ecological groups to show that eukaryotic and prokaryotic microbes in plankton demonstrate a maximum species richness in the challenging zone of the critical salinity 5-8, where the large-bodied bottom dwellers (macrozoobenthos, macroalgae and aquatic higher plants) experience large-scale salinity stress which leads to an impoverished diversity. We propose a new conceptual model to explain why the diversity of small, fast-developing, rapidly evolving unicellular plankton organisms benefits from relative vacancy of brackish-water ecological niches and impaired competitiveness therein. The ecotone theory, Hutchinson's Ecological Niche Concept, species-area relationships and the Intermediate Disturbance Hypothesis are considered as a theoretical framework for understanding extinctions, speciation and variations in the evolution rates of different aquatic species in ecosystems with the pronounced salinity gradient.

  3. Sign rank versus Vapnik-Chervonenkis dimension

    NASA Astrophysics Data System (ADS)

    Alon, N.; Moran, Sh; Yehudayoff, A.

    2017-12-01

    This work studies the maximum possible sign rank of sign (N × N)-matrices with a given Vapnik-Chervonenkis dimension d. For d=1, this maximum is three. For d=2, this maximum is \\widetilde{\\Theta}(N1/2). For d >2, similar but slightly less accurate statements hold. The lower bounds improve on previous ones by Ben-David et al., and the upper bounds are novel. The lower bounds are obtained by probabilistic constructions, using a theorem of Warren in real algebraic topology. The upper bounds are obtained using a result of Welzl about spanning trees with low stabbing number, and using the moment curve. The upper bound technique is also used to: (i) provide estimates on the number of classes of a given Vapnik-Chervonenkis dimension, and the number of maximum classes of a given Vapnik-Chervonenkis dimension--answering a question of Frankl from 1989, and (ii) design an efficient algorithm that provides an O(N/log(N)) multiplicative approximation for the sign rank. We also observe a general connection between sign rank and spectral gaps which is based on Forster's argument. Consider the adjacency (N × N)-matrix of a Δ-regular graph with a second eigenvalue of absolute value λ and Δ ≤ N/2. We show that the sign rank of the signed version of this matrix is at least Δ/λ. We use this connection to prove the existence of a maximum class C\\subseteq\\{+/- 1\\}^N with Vapnik-Chervonenkis dimension 2 and sign rank \\widetilde{\\Theta}(N1/2). This answers a question of Ben-David et al. regarding the sign rank of large Vapnik-Chervonenkis classes. We also describe limitations of this approach, in the spirit of the Alon-Boppana theorem. We further describe connections to communication complexity, geometry, learning theory, and combinatorics. Bibliography: 69 titles.

  4. Early Implementation of the Class Size Reduction Initiative.

    ERIC Educational Resources Information Center

    Illig, David C.

    A survey of school districts was conducted to determine the initial progress and problems associated with the 1997 Class Size Reduction (CSR) Initiative. Data reveal that most school districts had enough space for smaller classes for at least two grade levels; small school districts were much less likely to report space constraints. The CSR did…

  5. Student Ratings of Instruction: Examining the Role of Academic Field, Course Level, and Class Size

    ERIC Educational Resources Information Center

    Laughlin, Anne M.

    2014-01-01

    This dissertation investigated the relationship between course characteristics and student ratings of instruction at a large research intensive university. Specifically, it examined the extent to which academic field, course level, and class size were associated with variation in mean class ratings. Past research consistently identifies…

  6. The Influence of Small Class Size, Duration, Intensity, and Heterogeneity on Head Start Fade

    ERIC Educational Resources Information Center

    Huss, Christopher D.

    2010-01-01

    The researcher conducted a nonexperimental study to investigate and analyze the influence of reduced class sizes, intensity (all day and every day), duration (five years), and heterogeneity (random class assignment) on the Head Start Fade effect. The researcher employed retrospective data analysis using a longitudinal explanatory design on data…

  7. The Relationship of Class Size Effects and Teacher Salary

    ERIC Educational Resources Information Center

    Peevely, Gary; Hedges, Larry; Nye, Barbara A.

    2005-01-01

    The effects of class size on academic achievement have been studied for decades. Although the results of small-scale, randomized experiments and large-scale, econometric studies point to positive effects of small classes, some scholars see the evidence as ambiguous. Recent analyses from a 4-year, large-scale, randomized experiment on the effects…

  8. Class Size: Teachers' Perspectives

    ERIC Educational Resources Information Center

    Watson, Kevin; Handal, Boris; Maher, Marguerite

    2016-01-01

    A consistent body of research shows that large classes have been perceived by teachers as an obstacle to deliver quality teaching. This large-scale study sought to investigate further those differential effects by asking 1,119 teachers from 321 K-12 schools in New South Wales (Australia) their perceptions of ideal class size for a variety of…

  9. Gauging the Nearness and Size of Cycle Maximum

    NASA Technical Reports Server (NTRS)

    Wilson, Robert M.; Hathaway, David H.

    2003-01-01

    A simple method for monitoring the nearness and size of conventional cycle maximum for an ongoing sunspot cycle is examined. The method uses the observed maximum daily value and the maximum monthly mean value of international sunspot number and the maximum value of the 2-mo moving average of monthly mean sunspot number to effect the estimation. For cycle 23, a maximum daily value of 246, a maximum monthly mean of 170.1, and a maximum 2-mo moving average of 148.9 were each observed in July 2000. Taken together, these values strongly suggest that conventional maximum amplitude for cycle 23 would be approx. 124.5, occurring near July 2002 +/-5 mo, very close to the now well-established conventional maximum amplitude and occurrence date for cycle 23-120.8 in April 2000.

  10. Power laws, discontinuities and regional city size distributions

    USGS Publications Warehouse

    Garmestani, A.S.; Allen, Craig R.; Gallagher, C.M.

    2008-01-01

    Urban systems are manifestations of human adaptation to the natural environment. City size distributions are the expression of hierarchical processes acting upon urban systems. In this paper, we test the entire city size distributions for the southeastern and southwestern United States (1990), as well as the size classes in these regions for power law behavior. We interpret the differences in the size of the regional city size distributions as the manifestation of variable growth dynamics dependent upon city size. Size classes in the city size distributions are snapshots of stable states within urban systems in flux.

  11. Breakup and reestablishment of the armour layer in a large gravel-bed river below dams: The lower Ebro

    NASA Astrophysics Data System (ADS)

    Vericat, Damia; Batalla, Ramon J.; Garcia, Celso

    2006-06-01

    Changes in armour layer during floods under supply limited conditions are little known. This paper describes the breakup and the reestablishment of the bed armour layer in the regulated gravel-bed Ebro River during a flooding period. The study was conducted over a 28-km study reach from 2002 to 2004. The surface, subsurface and bed load grain size distribution constitute the bases for the analysis of bed-armouring dynamics. The results indicate that the magnitude of floods controlled the degree of armouring of the river bed. The initial mean armouring ratio was 2.3, with maximum values reaching 4.4. Floods in the winter of 2002-2003 ( Q8) caused the breakup of the armour layer in several sections. This resulted in the erratic bed load pattern observed during the December 2002 flushing flow and in the increase in bed load transport during successive events. Most grain size classes were entrained and transported, causing river bed incision. The mean armouring ratio decreased to 1.9. In contrast, during low magnitude floods in 2003-2004 ( Q2), the coarsest fractions (64 mm) did not take part in the bed load while finer particles were winnowed, thus surface deposits coarsened. As a result, the armour layer was reestablished (i.e., the mean armouring ratio increased to 2.3), and the supply of subsurface sediment decreased. The supply and transport of bed material appear to be in balance in the river reach immediately below the dam. In contrast, the transport of medium and finer size classes in the downstream reaches was higher than their supply from upstream, a phenomenon that progressively reduced their availability in the river bed surface, hence the armour layer reworking.

  12. An improved maximum power point tracking method for a photovoltaic system

    NASA Astrophysics Data System (ADS)

    Ouoba, David; Fakkar, Abderrahim; El Kouari, Youssef; Dkhichi, Fayrouz; Oukarfi, Benyounes

    2016-06-01

    In this paper, an improved auto-scaling variable step-size Maximum Power Point Tracking (MPPT) method for photovoltaic (PV) system was proposed. To achieve simultaneously a fast dynamic response and stable steady-state power, a first improvement was made on the step-size scaling function of the duty cycle that controls the converter. An algorithm was secondly proposed to address wrong decision that may be made at an abrupt change of the irradiation. The proposed auto-scaling variable step-size approach was compared to some various other approaches from the literature such as: classical fixed step-size, variable step-size and a recent auto-scaling variable step-size maximum power point tracking approaches. The simulation results obtained by MATLAB/SIMULINK were given and discussed for validation.

  13. Comparing fishers' and scientific estimates of size at maturity and maximum body size as indicators for overfishing.

    PubMed

    Mclean, Elizabeth L; Forrester, Graham E

    2018-04-01

    We tested whether fishers' local ecological knowledge (LEK) of two fish life-history parameters, size at maturity (SAM) at maximum body size (MS), was comparable to scientific estimates (SEK) of the same parameters, and whether LEK influenced fishers' perceptions of sustainability. Local ecological knowledge was documented for 82 fishers from a small-scale fishery in Samaná Bay, Dominican Republic, whereas SEK was compiled from the scientific literature. Size at maturity estimates derived from LEK and SEK overlapped for most of the 15 commonly harvested species (10 of 15). In contrast, fishers' maximum size estimates were usually lower than (eight species), or overlapped with (five species) scientific estimates. Fishers' size-based estimates of catch composition indicate greater potential for overfishing than estimates based on SEK. Fishers' estimates of size at capture relative to size at maturity suggest routine inclusion of juveniles in the catch (9 of 15 species), and fishers' estimates suggest that harvested fish are substantially smaller than maximum body size for most species (11 of 15 species). Scientific estimates also suggest that harvested fish are generally smaller than maximum body size (13 of 15), but suggest that the catch is dominated by adults for most species (9 of 15 species), and that juveniles are present in the catch for fewer species (6 of 15). Most Samaná fishers characterized the current state of their fishery as poor (73%) and as having changed for the worse over the past 20 yr (60%). Fishers stated that concern about overfishing, catching small fish, and catching immature fish contributed to these perceptions, indicating a possible influence of catch-size composition on their perceptions. Future work should test this link more explicitly because we found no evidence that the minority of fishers with more positive perceptions of their fishery reported systematically different estimates of catch-size composition than those with the more negative majority view. Although fishers' and scientific estimates of size at maturity and maximum size parameters sometimes differed, the fact that fishers make routine quantitative assessments of maturity and body size suggests potential for future collaborative monitoring efforts to generate estimates usable by scientists and meaningful to fishers. © 2017 by the Ecological Society of America.

  14. Factors associated with long-term species composition in dry tropical forests of Central India

    NASA Astrophysics Data System (ADS)

    Agarwala, M.; DeFries, R. S.; Qureshi, Q.; Jhala, Y. V.

    2016-10-01

    The long-term future of species composition in forests depends on regeneration. Many factors can affect regeneration, including human use, environmental conditions, and species’ traits. This study examines the influence of these factors in a tropical deciduous forest of Central India, which is heavily used by local, forest-dependent residents for livestock grazing, fuel-wood extraction, construction and other livelihood needs. We measure size-class proportions (the ratio of abundance of a species at a site in a higher size class to total abundance in both lower and higher size classes) for 39 tree species across 20 transects at different intensities of human use. The size-class proportions for medium to large trees and for small to medium-sized trees were negatively associated with species that are used for local construction, while size class proportions for saplings to small trees were positively associated with those species that are fire resistant and negatively associated with livestock density. Results indicate that grazing and fire prevent non-fire resistant species from reaching reproductive age, which can alter the long term composition and future availability of species that are important for local use and ecosystem services. Management efforts to reduce fire and forest grazing could reverse these impacts on long-term forest composition.

  15. The Effects of Instructor Participation and Class Size on Student Participation in an Online Class Discussion Forum

    ERIC Educational Resources Information Center

    Parks-Stamm, Elizabeth J.; Zafonte, Maria; Palenque, Stephanie M.

    2017-01-01

    Student participation in online discussion forums is associated with positive outcomes for student achievement and satisfaction, but research findings on the impact of class size and instructors' participation on student participation have been mixed. The present study analyzed the frequency of instructor and student posts in asynchronous…

  16. A Descriptive Evaluation of the Federal Class-Size Reduction Program: Final Report

    ERIC Educational Resources Information Center

    Millsap, Mary Ann; Giancola, Jennifer; Smith, W. Carter; Hunt, Dana; Humphrey, Daniel C.; Wechsler, Marjorie E.; Riehl, Lori M.

    2004-01-01

    The federal Class-Size Reduction (CSR) Program, P.L. 105-277, begun in Fiscal Year 1999, represented a major federal commitment to help school districts hire additional qualified teachers, especially in the early elementary grades, so children would learn in smaller classes. The CSR program also allowed funds to be spent as professional…

  17. Class-Size Effects on Adolescents' Mental Health and Well-Being in Swedish Schools

    ERIC Educational Resources Information Center

    Jakobsson, Niklas; Persson, Mattias; Svensson, Mikael

    2013-01-01

    This paper analyzes whether class size has an effect on the prevalence of mental health problems and well-being among adolescents in Swedish schools. We use cross-sectional data collected in year 2008 covering 2755 Swedish adolescents in ninth grade from 40 schools and 159 classes. We utilize different econometric approaches to address potential…

  18. Utilizing Online Education in Florida to Meet Mandated Class Size Limitations

    ERIC Educational Resources Information Center

    Mattox, Kari Ann

    2012-01-01

    With the passage of a state constitutional amendment in 2002, Florida school districts faced the challenge of meeting class size mandates in core subjects, such as mathematics, English, and science by the 2010-2011 school year, or face financial penalties. Underpinning the amendment's goals was the argument that smaller classes are more effective…

  19. Three Essays on the Economics of Education: Class-Size Reduction, Teacher Labor Markets, and Teacher Effectiveness

    ERIC Educational Resources Information Center

    Dieterle, Steven

    2012-01-01

    Prior research has established the potential for achievement gains from attending smaller classes. However, large statewide class-size reduction (CSR) policies have not been found to consistently realize such gains. A leading explanation for the disappointing performance of CSR policies is that schools are forced to hire additional teachers of…

  20. Class Size: Can School Districts Capitalize on the Benefits of Smaller Classes?

    ERIC Educational Resources Information Center

    Hertling, Elizabeth; Leonard, Courtney; Lumsden, Linda; Smith, Stuart C.

    2000-01-01

    This report is intended to help policymakers understand the benefits of class-size reduction (CSR). It assesses the costs of CSR, considers some research-based alternatives, and explores strategies that will help educators realize the benefits of CSR when it is implemented. It examines how CSR enhances student achievement, such as when the…

  1. Class Size Reduction: Lessons Learned from Experience. Policy Brief No. Twenty-Three.

    ERIC Educational Resources Information Center

    McRobbie, Joan; Finn, Jeremy D.; Harman, Patrick

    New federal proposals have fueled national interest in class-size reduction (CSR). However, CSR raises numerous concerns, some of which are addressed in this policy brief. The text draws on the experiences of states and districts that have implemented CSR. The brief addresses the following 15 concerns: Do small classes in and of themselves affect…

  2. Experimental Estimates of the Impacts of Class Size on Test Scores: Robustness and Heterogeneity

    ERIC Educational Resources Information Center

    Ding, Weili; Lehrer, Steven F.

    2011-01-01

    Proponents of class size reductions (CSRs) draw heavily on the results from Project Student/Teacher Achievement Ratio to support their initiatives. Adding to the political appeal of these initiative are reports that minority and economically disadvantaged students received the largest benefits from smaller classes. We extend this research in two…

  3. Land use surveys by means of automatic interpretation of LANDSAT system data

    NASA Technical Reports Server (NTRS)

    Dejesusparada, N. (Principal Investigator); Lombardo, M. A.; Novo, E. M. L. D.; Niero, M.; Foresti, C.

    1981-01-01

    Analyses for seven land-use classes are presented. The classes are: urban area, industrial area, bare soil, cultivated area, pastureland, reforestation, and natural vegetation. The automatic classification of LANDSAT MSS data using a maximum likelihood algorithm shows a 39% average error of emission and a 3.45 error of commission for the seven classes.

  4. On the Pontryagin maximum principle for systems with delays. Economic applications

    NASA Astrophysics Data System (ADS)

    Kim, A. V.; Kormyshev, V. M.; Kwon, O. B.; Mukhametshin, E. R.

    2017-11-01

    The Pontryagin maximum principle [6] is the key stone of finite-dimensional optimal control theory [1, 2, 5]. So beginning with opening the maximum principle it was important to extend the maximum principle on various classes of dynamical systems. In t he paper we consider some aspects of application of i-smooth analysis [3, 4] in the theory of the Pontryagin maximum principle [6] for systems with delays, obtained results can be applied by elaborating optimal program controls in economic models with delays.

  5. Health Science students' evaluation of courses and Instructors: the effect of response rate and class size interaction.

    PubMed

    Kuwaiti, Ahmed Al

    2015-01-01

    This study aims at investigating the effect of response rate and class size interaction on students' evaluation of instructors and the courses offered at heath science colleges in Saudi Arabia. A retrospective study design was adapted to ascertain Course Evaluation Surveys (CES) conducted at the health science colleges of the University of Dammam [UOD] in the academic year 2013-2014. Accordingly, the CES data which was downloaded from an exclusive online application 'UDQUEST' which includes 337 different courses and 15,264 surveys were utilized in this study. Two-way analysis of variance was utilized to test whether there is any significant interaction between the class size and the response rate on the students' evaluation of courses and instructors. The study showed that high response rate is required for student evaluation of instructors at Health Science colleges when the class size is small whereas a medium response rate is required for students' evaluation of courses. On the other hand, when the class size is medium, a medium or high response rate is needed for students' evaluation of both instructors and courses. The results of this study recommend that the administrators of the health science colleges to be aware of the interpretation of students' evaluations of courses and instructors. The study also suggests that the interaction between response rate and class size is a very important factor that needs to be taken into consideration while interpreting the findings of the students' evaluation of instructors and courses.

  6. The emission in the region E>0.1MeV during disk and limb faint solar flares

    NASA Astrophysics Data System (ADS)

    Irene, Arkhangelskaja; Andrew, Arkhangelskiy; Yury, Kotov; Alexandr, Glyanenko; Maria, Kolchina; Alexey, Kirichenko

    2013-06-01

    Hard X-ray and gamma-ray emission in energy band E>50 keV was first observed by AVS-F apparatus onboard CORONAS-F satellite (detector SONG-D) during some solar flares with classes B and C by GOES classification. Such component registered in flares with duration less than 30 min. However γ-emission up to several tens of MeV was observed during some classes B and C events, which temporal profiles were not corresponded to Neupert effect. For example, during class B2.3 limb solar flare January 7, 2005 maximum observed energy was Emax˜36 MeV and during class B4.6 disk solar event January 12, 2005 maximum observed energy was Emax˜7 MeV. Properties of temporal profiles and energy spectra of faint solar flares, during which emission in the energy band of E>0.1 MeV were registered are discussed in the presented work. There is not any strong correlation between presence or absence of hard X-ray and γ-ray emission and the intensity of soft X-ray emission during solar flares. The one of illustration of this fact is the absence of any observed statistically significant count rate exceed above background level during some class M flares in the energy band E>0.1 MeV. The typical example of such flares is event November 8, 2001 (class M4.2, lasts from 14:59 UT up to 16:00 UT, maximum of soft X-ray emission was at 15:35 UT on GOES data).

  7. Is There a Maximum Size of Water Drops in Nature?

    ERIC Educational Resources Information Center

    Vollmer, Michael; Mollmann, Klaus-Peter

    2013-01-01

    In nature, water drops can have a large variety of sizes and shapes. Small droplets with diameters of the order of 5 to 10 µm are present in fog and clouds. This is not sufficiently large for gravity to dominate their behavior. In contrast, raindrops typically have sizes of the order of 1 mm, with observed maximum sizes in nature of around 5 mm in…

  8. First assembly times and equilibration in stochastic coagulation-fragmentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    D’Orsogna, Maria R.; Department of Mathematics, CSUN, Los Angeles, California 91330-8313; Lei, Qi

    2015-07-07

    We develop a fully stochastic theory for coagulation and fragmentation (CF) in a finite system with a maximum cluster size constraint. The process is modeled using a high-dimensional master equation for the probabilities of cluster configurations. For certain realizations of total mass and maximum cluster sizes, we find exact analytical results for the expected equilibrium cluster distributions. If coagulation is fast relative to fragmentation and if the total system mass is indivisible by the mass of the largest allowed cluster, we find a mean cluster-size distribution that is strikingly broader than that predicted by the corresponding mass-action equations. Combinations ofmore » total mass and maximum cluster size under which equilibration is accelerated, eluding late-stage coarsening, are also delineated. Finally, we compute the mean time it takes particles to first assemble into a maximum-sized cluster. Through careful state-space enumeration, the scaling of mean assembly times is derived for all combinations of total mass and maximum cluster size. We find that CF accelerates assembly relative to monomer kinetic only in special cases. All of our results hold in the infinite system limit and can be only derived from a high-dimensional discrete stochastic model, highlighting how classical mass-action models of self-assembly can fail.« less

  9. Mapped Plot Patch Size Estimates

    Treesearch

    Paul C. Van Deusen

    2005-01-01

    This paper demonstrates that the mapped plot design is relatively easy to analyze and describes existing formulas for mean and variance estimators. New methods are developed for using mapped plots to estimate average patch size of condition classes. The patch size estimators require assumptions about the shape of the condition class, limiting their utility. They may...

  10. From the Cover: Environmental and biotic controls on the evolutionary history of insect body size

    NASA Astrophysics Data System (ADS)

    Clapham, Matthew E.; Karr, Jered A.

    2012-07-01

    Giant insects, with wingspans as large as 70 cm, ruled the Carboniferous and Permian skies. Gigantism has been linked to hyperoxic conditions because oxygen concentration is a key physiological control on body size, particularly in groups like flying insects that have high metabolic oxygen demands. Here we show, using a dataset of more than 10,500 fossil insect wing lengths, that size tracked atmospheric oxygen concentrations only for the first 150 Myr of insect evolution. The data are best explained by a model relating maximum size to atmospheric environmental oxygen concentration (pO2) until the end of the Jurassic, and then at constant sizes, independent of oxygen fluctuations, during the Cretaceous and, at a smaller size, the Cenozoic. Maximum insect size decreased even as atmospheric pO2 rose in the Early Cretaceous following the evolution and radiation of early birds, particularly as birds acquired adaptations that allowed more agile flight. A further decrease in maximum size during the Cenozoic may relate to the evolution of bats, the Cretaceous mass extinction, or further specialization of flying birds. The decoupling of insect size and atmospheric pO2 coincident with the radiation of birds suggests that biotic interactions, such as predation and competition, superseded oxygen as the most important constraint on maximum body size of the largest insects.

  11. Sensitivity Analysis of the USLE Soil Erodibility Factor to Its Determining Parameters

    NASA Astrophysics Data System (ADS)

    Mitova, Milena; Rousseva, Svetla

    2014-05-01

    Soil erosion is recognized as one of the most serious soil threats worldwide. Soil erosion prediction is the first step in soil conservation planning. The Universal Soil Loss Equation (USLE) is one of the most widely used models for soil erosion predictions. One of the five USLE predictors is the soil erodibility factor (K-factor), which evaluates the impact of soil characteristics on soil erosion rates. Soil erodibility nomograph defines K-factor depending on soil characteristics, such as: particle size distribution (fractions finer that 0.002 mm and from 0.1 to 0.002 mm), organic matter content, soil structure and soil profile water permeability. Identifying the soil characteristics, which mostly influence the K-factor would give an opportunity to control the soil loss through erosion by controlling the parameters, which reduce the K-factor value. The aim of the report is to present the results of analysis of the relative weight of these soil characteristics in the K-factor values. The relative impact of the soil characteristics on K-factor was studied through a series of statistical analyses of data from the geographic database for soil erosion risk assessments in Bulgaria. Degree of correlation between K-factor values and the parameters that determine it was studied by correlation analysis. The sensitivity of the K-factor was determined by studying the variance of each parameter within the range between minimum and maximum possible values considering average value of the other factors. Normalizing transformation of data sets was applied because of the different dimensions and the orders of variation of the values of the various parameters. The results show that the content of particles finer than 0.002 mm has the most significant relative impact on the soil erodibility, followed by the content of particles with size from 0.1 mm to 0.002 mm, the class of the water permeability of the soil profile, the content of organic matter and the aggregation class. The relationships of the K-factor with the relative content of particle size from 0.1 to 0.002 mm and the class of aggregation are linear, directly proportional. When the content of particles sized from 0.1 to 0.002 mm increases with one relative unit, the K-factor increases with 0.0091 t ha h / ha MJ mm, while the same relative increase of the class of aggregation, results to an increase of the K-factor by 0.0034 t ha h / ha MJ mm. On the other side, the relationships between the K-factor values and the contents of clay and organic matter, and the class of profile water permeability, are linear, inversely proportional. When the clay content increases with one relative unit, the K-factor value decreases by 0.0099 t ha h / ha MJ mm. The same relative increases in the content of soil organic matter and the class of soil profile water permeability, result to a decrease of the values of K-factor respectively by 0.0042 and 0.0045 t ha h / ha MJ mm.

  12. Preliminarily study on the maximum handling size, prey size and species selectivity of growth hormone transgenic and non-transgenic common carp Cyprinus carpio when foraging on gastropods

    NASA Astrophysics Data System (ADS)

    Zhu, Tingbing; Zhang, Lihong; Zhang, Tanglin; Wang, Yaping; Hu, Wei; Olsen, Rolf Eric; Zhu, Zuoyan

    2017-10-01

    The present study preliminarily examined the differences in maximum handling size, prey size and species selectivity of growth hormone transgenic and non-transgenic common carp Cyprinus carpio when foraging on four gastropods species (Bellamya aeruginosa, Radix auricularia, Parafossarulus sinensis and Alocinma longicornis) under laboratory conditions. In the maximum handling size trial, five fish from each age group (1-year-old and 2-year-old) and each genotype (transgenic and non-transgenic) of common carp were individually allowed to feed on B. aeruginosa with wide shell height range. The results showed that maximum handling size increased linearly with fish length, and there was no significant difference in maximum handling size between the two genotypes. In the size selection trial, three pairs of 2-year-old transgenic and non-transgenic carp were individually allowed to feed on three size groups of B. aeruginosa. The results show that the two genotypes of C. carpio favored the small-sized group over the large-sized group. In the species selection trial, three pairs of 2-year-old transgenic and non-transgenic carp were individually allowed to feed on thin-shelled B. aeruginosa and thick-shelled R. auricularia, and five pairs of 2-year-old transgenic and non-transgenic carp were individually allowed to feed on two gastropods species (P. sinensis and A. longicornis) with similar size and shell strength. The results showed that both genotypes preferred thin-shelled Radix auricularia rather than thick-shelled B. aeruginosa, but there were no significant difference in selectivity between the two genotypes when fed on P. sinensis and A. longicornis. The present study indicates that transgenic and non-transgenic C. carpio show similar selectivity of predation on the size- and species-limited gastropods. While this information may be useful for assessing the environmental risk of transgenic carp, it does not necessarily demonstrate that transgenic common carp might have lesser environmental impacts than non-transgenic carp.

  13. Effect of retraction of anterior teeth on pharyngeal airway and hyoid bone position in Class I bimaxillary dentoalveolar protrusion.

    PubMed

    Bhatia, S; Jayan, B; Chopra, S S

    2016-12-01

    To test the hypothesis that the retraction of anterior teeth has no effect on the dimensions of pharyngeal airway and to evaluate the retraction of anterior teeth on each parameter of pharyngeal airway. Twenty-two adult patients of Class I bimaxillary protrusion requiring first premolar extractions with maximum anchorage requirements were selected. The pharyngeal airway and dentofacial parameters of the patients were compared using pre- and post-treatment lateral cephalograms with the help of Student's paired t -test ( P  < 0.05). The relationship between airway size and dentofacial parameters was also evaluated using Pearson correlation coefficient. The upper and lower lips were retracted by 2.25 and 5.4 mm after retraction of the incisors. The tips of upper and lower incisors were retracted by 7.75 and 7.15 mm, respectively. There was a statistically significant decrease in SPP-SPPW ( P  < 0.05), U-MPW ( P  < 0.001), TB-TPPW ( P  < 0.001), and change in HRGN ( P  < 0.01). A significant correlation was observed between the amount of retraction of lower incisor and decrease in the pharyngeal airway posterior to soft palate ( r  = 0.102), tongue ( r  = 0.322), and change in HRGN ( r  = 0.265). The size of the pharyngeal (velopharyngeal and glossopharyngeal) airway reduced and hyoid bone position changed after retraction of the incisors in extraction space in bimaxillary protrusive adult patients.

  14. An online detection system for aggregate sizes and shapes based on digital image processing

    NASA Astrophysics Data System (ADS)

    Yang, Jianhong; Chen, Sijia

    2017-02-01

    Traditional aggregate size measuring methods are time-consuming, taxing, and do not deliver online measurements. A new online detection system for determining aggregate size and shape based on a digital camera with a charge-coupled device, and subsequent digital image processing, have been developed to overcome these problems. The system captures images of aggregates while falling and flat lying. Using these data, the particle size and shape distribution can be obtained in real time. Here, we calibrate this method using standard globules. Our experiments show that the maximum particle size distribution error was only 3 wt%, while the maximum particle shape distribution error was only 2 wt% for data derived from falling aggregates, having good dispersion. In contrast, the data for flat-lying aggregates had a maximum particle size distribution error of 12 wt%, and a maximum particle shape distribution error of 10 wt%; their accuracy was clearly lower than for falling aggregates. However, they performed well for single-graded aggregates, and did not require a dispersion device. Our system is low-cost and easy to install. It can successfully achieve online detection of aggregate size and shape with good reliability, and it has great potential for aggregate quality assurance.

  15. Flexible, planar-integrated, all-solid-state fiber supercapacitors with an enhanced distributed-capacitance effect.

    PubMed

    Liu, Bin; Tan, Dongsheng; Wang, Xianfu; Chen, Di; Shen, Guozhen

    2013-06-10

    Flexible and highly efficient energy storage units act as one of the key components in portable electronics. In this work, by planar-integrated assembly of hierarchical ZnCo₂O₄ nanowire arrays/carbon fibers electrodes, a new class of flexible all-solid-state planar-integrated fiber supercapacitors are designed and produced via a low-cost and facile method. The as-fabricated flexible devices exhibit high-efficiency, enhanced capacity, long cycle life, and excellent electrical stability. An enhanced distributed-capacitance effect is experimentally observed for the device. This strategy enables highly flexible new structured supercapacitors with maximum functionality and minimized size, thus making it possible to be readily applied in flexible/portable photoelectronic devices. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. The Effectiveness of School-Type Classes Compared to the Traditional Lecture/Tutorial Method for Teaching Quantitative Methods to Business Students.

    ERIC Educational Resources Information Center

    Goldfinch, Judy

    1996-01-01

    A study compared the effectiveness of two methods (medium-size class instruction and large lectures with tutorial sessions) for teaching mathematics and statistics to first-year business students. Students and teachers overwhelmingly preferred the medium-size class method, which produced higher exam scores but had no significant effect on…

  17. Class-Size Reduction: Using What's Been Learned To Inform Educational Decisions. The Informed Educator Series.

    ERIC Educational Resources Information Center

    Boniface, Russell; Protheroe, Nancy

    Class-size reduction (CSR) has been a complex and contentious issue for the last quarter century. Although the small-class concept was adopted because it appealed to common sense, research over time has revealed a mix of confounding variables, instead of a definitive conclusion. Some CSR efforts, such as Tennessee's Project STAR and Wisconsin's…

  18. Bioinformatics analysis of disordered proteins in prokaryotes

    PubMed Central

    2011-01-01

    Background A significant number of proteins have been shown to be intrinsically disordered, meaning that they lack a fixed 3 D structure or contain regions that do not posses a well defined 3 D structure. It has also been proven that a protein's disorder content is related to its function. We have performed an exhaustive analysis and comparison of the disorder content of proteins from prokaryotic organisms (i.e., superkingdoms Archaea and Bacteria) with respect to functional categories they belong to, i.e., Clusters of Orthologous Groups of proteins (COGs) and groups of COGs-Cellular processes (Cp), Information storage and processing (Isp), Metabolism (Me) and Poorly characterized (Pc). We also analyzed the disorder content of proteins with respect to various genomic, metabolic and ecological characteristics of the organism they belong to. We used correlations and association rule mining in order to identify the most confident associations between specific modalities of the characteristics considered and disorder content. Results Bacteria are shown to have a somewhat higher level of protein disorder than archaea, except for proteins in the Me functional group. It is demonstrated that the Isp and Cp functional groups in particular (L-repair function and N-cell motility and secretion COGs of proteins in specific) possess the highest disorder content, while Me proteins, in general, posses the lowest. Disorder fractions have been confirmed to have the lowest level for the so-called order-promoting amino acids and the highest level for the so-called disorder promoters. For each pair of organism characteristics, specific modalities are identified with the maximum disorder proteins in the corresponding organisms, e.g., high genome size-high GC content organisms, facultative anaerobic-low GC content organisms, aerobic-high genome size organisms, etc. Maximum disorder in archaea is observed for high GC content-low genome size organisms, high GC content-facultative anaerobic or aquatic or mesophilic organisms, etc. Maximum disorder in bacteria is observed for high GC content-high genome size organisms, high genome size-aerobic organisms, etc. Some of the most reliable association rules mined establish relationships between high GC content and high protein disorder, medium GC content and both medium and low protein disorder, anaerobic organisms and medium protein disorder, Gammaproteobacteria and low protein disorder, etc. A web site Prokaryote Disorder Database has been designed and implemented at the address http://bioinfo.matf.bg.ac.rs/disorder, which contains complete results of the analysis of protein disorder performed for 296 prokaryotic completely sequenced genomes. Conclusions Exhaustive disorder analysis has been performed by functional classes of proteins, for a larger dataset of prokaryotic organisms than previously done. Results obtained are well correlated to those previously published, with some extension in the range of disorder level and clear distinction between functional classes of proteins. Wide correlation and association analysis between protein disorder and genomic and ecological characteristics has been performed for the first time. The results obtained give insight into multi-relationships among the characteristics and protein disorder. Such analysis provides for better understanding of the evolutionary process and may be useful for taxon determination. The main drawback of the approach is the fact that the disorder considered has been predicted and not experimentally established. PMID:21366926

  19. Suitability of river delta sediment as proppant, Missouri and Niobrara Rivers, Nebraska and South Dakota, 2015

    USGS Publications Warehouse

    Zelt, Ronald B.; Hobza, Christopher M.; Burton, Bethany L.; Schaepe, Nathaniel J.; Piatak, Nadine

    2017-11-16

    Sediment management is a challenge faced by reservoir managers who have several potential options, including dredging, for mitigation of storage capacity lost to sedimentation. As sediment is removed from reservoir storage, potential use of the sediment for socioeconomic or ecological benefit could potentially defray some costs of its removal. Rivers that transport a sandy sediment load will deposit the sand load along a reservoir-headwaters reach where the current of the river slackens progressively as its bed approaches and then descends below the reservoir water level. Given a rare combination of factors, a reservoir deposit of alluvial sand has potential to be suitable for use as proppant for hydraulic fracturing in unconventional oil and gas development. In 2015, the U.S. Geological Survey began a program of researching potential sources of proppant sand from reservoirs, with an initial focus on the Missouri River subbasins that receive sand loads from the Nebraska Sand Hills. This report documents the methods and results of assessments of the suitability of river delta sediment as proppant for a pilot study area in the delta headwaters of Lewis and Clark Lake, Nebraska and South Dakota. Results from surface-geophysical surveys of electrical resistivity guided borings to collect 3.7-meter long cores at 25 sites on delta sandbars using the direct-push method to recover duplicate, 3.8-centimeter-diameter cores in April 2015. In addition, the U.S. Geological Survey collected samples of upstream sand sources in the lower Niobrara River valley.At the laboratory, samples were dried, weighed, washed, dried, and weighed again. Exploratory analysis of natural sand for determining its suitability as a proppant involved application of a modified subset of the standard protocols known as American Petroleum Institute (API) Recommended Practice (RP) 19C. The RP19C methods were not intended for exploration-stage evaluation of raw materials. Results for the washed samples are not directly applicable to evaluations of suitability for use as fracture sand because, except for particle-size distribution, the API-recommended practices for assessing proppant properties (sphericity, roundness, bulk density, and crush resistance) require testing of specific proppant size classes. An optical imaging particle-size analyzer was used to make measurements of particle-size distribution and particle shape. Measured samples were sieved to separate the dominant-size fraction, and the separated subsample was further tested for roundness, sphericity, bulk density, and crush resistance.For the bulk washed samples collected from the Missouri River delta, the geometric mean size averaged 0.27 millimeters (mm), 80 percent of the samples were predominantly sand in the API 40/70 size class, and 17 percent were predominantly sand in the API 70/140 size class. Distributions of geometric mean size among the four sandbar complexes were similar, but samples collected from sandbar complex B were slightly coarser sand than those from the other three complexes. The average geometric mean sizes among the four sandbar complexes ranged only from 0.26 to 0.30 mm. For 22 main-stem sampling locations along the lower Niobrara River, geometric mean size averaged 0.26 mm, an average of 61 percent was sand in the API 40/70 size class, and 28 percent was sand in the API 70/140 size class. Average composition for lower Niobrara River samples was 48 percent medium sand, 37 percent fine sand, and about 7 percent each very fine sand and coarse sand fractions. On average, samples were moderately well sorted.Particle shape and strength were assessed for the dominant-size class of each sample. For proppant strength, crush resistance was tested at a predetermined level of stress (34.5 megapascals [MPa], or 5,000 pounds-force per square inch). To meet the API minimum requirement for proppant, after the crush test not more than 10 percent of the tested sample should be finer than the precrush dominant-size class. For particle shape, all samples surpassed the recommended minimum criteria for sphericity and roundness, with most samples being well-rounded. For proppant strength, of 57 crush-resistance tested Missouri River delta samples of 40/70-sized sand, 23 (40 percent) were interpreted as meeting the minimum criterion at 34.5 MPa, or 5,000 pounds-force per square inch. Of 12 tested samples of 70/140-sized sand, 9 (75 percent) of the Missouri River delta samples had less than 10 percent fines by volume following crush testing, achieving the minimum criterion at 34.5 MPa. Crush resistance for delta samples was strongest at sandbar complex A, where 67 percent of tested samples met the 10-percent fines criterion at the 34.5-MPa threshold. This frequency was higher than was indicated by samples from sandbar complexes B, C, and D that had rates of 50, 46, and 42 percent, respectively. The group of sandbar complex A samples also contained the largest percentages of samples dominated by the API 70/140 size class, which overall had a higher percentage of samples meeting the minimum criterion compared to samples dominated by coarser size classes; however, samples from sandbar complex A that had the API 40/70 size class tested also had a higher rate for meeting the minimum criterion (57 percent) than did samples from sandbar complexes B, C, and D (50, 43, and 40 percent, respectively). For samples collected along the lower Niobrara River, of the 25 tested samples of 40/70-sized sand, 9 samples passed the API minimum criterion at 34.5 MPa, but only 3 samples passed the more-stringent criterion of 8 percent postcrush fines. All four tested samples of 70/140 sand passed the minimum criterion at 34.5 MPa, with postcrush fines percentage of at most 4.1 percent.For two reaches of the lower Niobrara River, where hydraulic sorting was energized artificially by the hydraulic head drop at and immediately downstream from Spencer Dam, suitability of channel deposits for potential use as fracture sand was confirmed by test results. All reach A washed samples were well-rounded and had sphericity scores above 0.65, and samples for 80 percent of sampled locations met the crush-resistance criterion at the 34.5-MPa stress level. A conservative lower-bound estimate of sand volume in the reach A deposits was about 86,000 cubic meters. All reach B samples were well-rounded but sphericity averaged 0.63, a little less than the average for upstream reaches A and SP. All four samples tested passed the crush-resistance test at 34.5 MPa. Of three reach B sandbars, two had no more than 3 percent fines after the crush test, surpassing more stringent criteria for crush resistance that accept a maximum of 6 percent fines following the crush test for the API 70/140 size class.Relative to the crush-resistance test results for the API 40/70 size fraction of two samples of mine output from Loup River settling-basin dredge spoils near Genoa, Nebr., four of five reach A sample locations compared favorably. The four samples had increases in fines composition of 1.6–5.9 percentage points, whereas fines in the two mine-output samples increased by an average 6.8 percentage points.

  20. Systems Operation Studies for Automated Guideway Transit Systems - Classification and Definition of AGT Systems

    DOT National Transportation Integrated Search

    1980-02-01

    The report describes the development of an AGT classification structure. Five classes are defined based on three system characteristics: service type, minimum travelling unit capacity, and maximum operating velocity. The five classes defined are: Per...

  1. Circuit-level optimisation of a:Si TFT-based AMOLED pixel circuits for maximum hold current

    NASA Astrophysics Data System (ADS)

    Foroughi, Aidin; Mehrpoo, Mohammadreza; Ashtiani, Shahin J.

    2013-11-01

    Design of AMOLED pixel circuits has manifold constraints and trade-offs which provides incentive for circuit designers to seek optimal solutions for different objectives. In this article, we present a discussion on the viability of an optimal solution to achieve the maximum hold current. A compact formula for component sizing in a conventional 2T1C pixel is, therefore, derived. Compared to SPICE simulation results, for several pixel sizes, our predicted optimum sizing yields maximum currents with errors less than 0.4%.

  2. Reliability and agreement in student ratings of the class environment.

    PubMed

    Nelson, Peter M; Christ, Theodore J

    2016-09-01

    The current study estimated the reliability and agreement of student ratings of the classroom environment obtained using the Responsive Environmental Assessment for Classroom Teaching (REACT; Christ, Nelson, & Demers, 2012; Nelson, Demers, & Christ, 2014). Coefficient alpha, class-level reliability, and class agreement indices were evaluated as each index provides important information for different interpretations and uses of student rating scale data. Data for 84 classes across 29 teachers in a suburban middle school were sampled to derive reliability and agreement indices for the REACT subscales across 4 class sizes: 25, 20, 15, and 10. All participating teachers were White and a larger number of 6th-grade classes were included (42%) relative to 7th- (33%) or 8th- (23%) grade classes. Teachers were responsible for a variety of content areas, including language arts (26%), science (26%), math (20%), social studies (19%), communications (6%), and Spanish (3%). Coefficient alpha estimates were generally high across all subscales and class sizes (α = .70-.95); class-mean estimates were greatly impacted by the number of students sampled from each class, with class-level reliability values generally falling below .70 when class size was reduced from 25 to 20. Further, within-class student agreement varied widely across the REACT subscales (mean agreement = .41-.80). Although coefficient alpha and test-retest reliability are commonly reported in research with student rating scales, class-level reliability and agreement are not. The observed differences across coefficient alpha, class-level reliability, and agreement indices provide evidence for evaluating students' ratings of the class environment according to their intended use (e.g., differentiating between classes, class-level instructional decisions). (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  3. 47 CFR 73.213 - Grandfathered short-spaced stations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... application for authority to operate a Class A station with no more than 3000 watts ERP and 100 meters antenna HAAT (or equivalent lower ERP and higher antenna HAAT based on a class contour distance of 24 km) must... application for authority to operate a Class A station with more than 3000 watts ERP (up to a maximum of 5800...

  4. 47 CFR 73.213 - Grandfathered short-spaced stations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... application for authority to operate a Class A station with no more than 3000 watts ERP and 100 meters antenna HAAT (or equivalent lower ERP and higher antenna HAAT based on a class contour distance of 24 km) must... application for authority to operate a Class A station with more than 3000 watts ERP (up to a maximum of 5800...

  5. 47 CFR 73.1570 - Modulation levels: AM, FM, TV and Class A TV aural.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 4 2012-10-01 2012-10-01 false Modulation levels: AM, FM, TV and Class A TV... levels: AM, FM, TV and Class A TV aural. (a) The percentage of modulation is to be maintained at as high a level as is consistent with good quality of transmission and good broadcast service, with maximum...

  6. 47 CFR 73.1570 - Modulation levels: AM, FM, TV and Class A TV aural.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Modulation levels: AM, FM, TV and Class A TV... levels: AM, FM, TV and Class A TV aural. (a) The percentage of modulation is to be maintained at as high a level as is consistent with good quality of transmission and good broadcast service, with maximum...

  7. 47 CFR 73.1570 - Modulation levels: AM, FM, TV and Class A TV aural.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Modulation levels: AM, FM, TV and Class A TV... levels: AM, FM, TV and Class A TV aural. (a) The percentage of modulation is to be maintained at as high a level as is consistent with good quality of transmission and good broadcast service, with maximum...

  8. Colony size as a species character in massive reef corals

    NASA Astrophysics Data System (ADS)

    Soong, Keryea

    1993-07-01

    In a study of seven massive, Caribbean corals, I have found major differences in reproductive behavior between species with large maximum colony sizes and species with smaller maximum colony sizes. Four species ( Diploria clivosa, D. strigosa, Montastrea cavernosa, Siderastrea siderea) which are large (<1000 cm2 in surface area) broadcast gametes during a short spawning season. Their puberty size is relatively large (>100 cm2, except M. cavernosa). In contrast, two small massive species (<100 cm2, Favia fragum and S. radians), and one medium-sized (100 1000 cm2, Porites astreoides) massive species, brood larvae during an extended season (year-round in Panama). The puberty size of the small species is only 2 4 cm2. Given these close associations between maximum colony sizes and a number of fundamental reproductive attributes, greater attention should be given to the colony size distributions of different species of reef corals in nature, since many important life history and population characters may be inferred.

  9. The Future of Small- and Medium-Sized Communities in the Prairie Region.

    ERIC Educational Resources Information Center

    Wellar, Barry S., Ed.

    Four papers are featured. The first is a statistical overview and analysis of past, present and future happenings to small communities in the Region; it focuses on two indicators: (1) population growth or declining community class size and, (2) the changing distribution of commercial outlets by community class size. The other three papers report…

  10. Channel catfish Ictalurus punctatus size and feed conversion ratio

    USDA-ARS?s Scientific Manuscript database

    Channel catfish, Ictalurus punctatus, of five size-classes were stocked into 20, 0.04-ha earthen ponds at a rate of 14,826 fish/ha. Mean initial weights for each size-class were 0.232, 0.458, 0.678, 0.911, and 1.10 kg/fish. Four ponds were randomly allotted to each treatment. A commercial 28% protei...

  11. Assessing Angle's malocclusion among cleft lip and/or palate patients in Jammu.

    PubMed

    Gupta, Akshay; Gupta, Anur; Bhardwaj, Amit; Vikram, S; Gomathi, Ajeetha; Singh, Karanprakash

    2016-04-01

    The study was conducted to examine the patients with abnormalities of cleft lip and/or palate and its association with different types of malocclusion. This descriptive study was done among 168 patients with abnormalities of cleft lip and/or palate. Angle's classification of malocclusion was applied for assessment of occlusion as Class I, Class II, and Class III. The types of oral clefts classification such as cleft lip unilateral and cleft lip bilateral, cleft palate (CP), unilateral cleft lip with palate (UCLP) and bilateral cleft lip with palate (BCLP) was considered. Chi-square test was applied to analyze the data at P < 0.05. The study showed different categories of clefts patients as cleft lip (81), CP (31), and both cleft lip and palate (53). The occurrence of unilateral cleft lip (44) was maximum among the sample followed by UCLP (39), and bilateral cleft lip (31). Maximum subjects with Class II (10.7%) and Class III (4.9%) malocclusion were seen with unilateral cleft lip deformities. None of the patients with UCLP had Class III malocclusion. Cleft lip was the most commonly observed deformity and high frequency of Class II and III malocclusion was evident. Therefore, patients with such abnormalities should be screened timely.

  12. Birth order, family size, and intelligence.

    PubMed

    Belmont, L; Marolla, F A

    1973-12-14

    The relation of birth order and family size to intellectual performance, as measured by the Raven Progressive Matrices, was examined among nearly all of 400,000 19-year-old males born in the Netherlands in 1944 through 1947. It was found that birth order and family size had independent effects on intellectual performance. Effects of family size were not present in all social classes, but effects of birth order were consistent across social class.

  13. Size-Class Effect Contributes to Tree Species Assembly through Influencing Dispersal in Tropical Forests

    PubMed Central

    Hu, Yue-Hua; Kitching, Roger L.; Lan, Guo-Yu; Zhang, Jiao-Lin; Sha, Li-Qing; Cao, Min

    2014-01-01

    We have investigated the processes of community assembly using size classes of trees. Specifically our work examined (1) whether point process models incorporating an effect of size-class produce more realistic summary outcomes than do models without this effect; (2) which of three selected models incorporating, respectively environmental effects, dispersal and the joint-effect of both of these, is most useful in explaining species-area relationships (SARs) and point dispersion patterns. For this evaluation we used tree species data from the 50-ha forest dynamics plot in Barro Colorado Island, Panama and the comparable 20 ha plot at Bubeng, Southwest China. Our results demonstrated that incorporating an size-class effect dramatically improved the SAR estimation at both the plots when the dispersal only model was used. The joint effect model produced similar improvement but only for the 50-ha plot in Panama. The point patterns results were not improved by incorporation of size-class effects using any of the three models. Our results indicate that dispersal is likely to be a key process determining both SARs and point patterns. The environment-only model and joint-effects model were effective at the species level and the community level, respectively. We conclude that it is critical to use multiple summary characteristics when modelling spatial patterns at the species and community levels if a comprehensive understanding of the ecological processes that shape species’ distributions is sought; without this results may have inherent biases. By influencing dispersal, the effect of size-class contributes to species assembly and enhances our understanding of species coexistence. PMID:25251538

  14. Assessment of Classification Accuracies of SENTINEL-2 and LANDSAT-8 Data for Land Cover / Use Mapping

    NASA Astrophysics Data System (ADS)

    Hale Topaloğlu, Raziye; Sertel, Elif; Musaoğlu, Nebiye

    2016-06-01

    This study aims to compare classification accuracies of land cover/use maps created from Sentinel-2 and Landsat-8 data. Istanbul metropolitan city of Turkey, with a population of around 14 million, having different landscape characteristics was selected as study area. Water, forest, agricultural areas, grasslands, transport network, urban, airport- industrial units and barren land- mine land cover/use classes adapted from CORINE nomenclature were used as main land cover/use classes to identify. To fulfil the aims of this research, recently acquired dated 08/02/2016 Sentinel-2 and dated 22/02/2016 Landsat-8 images of Istanbul were obtained and image pre-processing steps like atmospheric and geometric correction were employed. Both Sentinel-2 and Landsat-8 images were resampled to 30m pixel size after geometric correction and similar spectral bands for both satellites were selected to create a similar base for these multi-sensor data. Maximum Likelihood (MLC) and Support Vector Machine (SVM) supervised classification methods were applied to both data sets to accurately identify eight different land cover/ use classes. Error matrix was created using same reference points for Sentinel-2 and Landsat-8 classifications. After the classification accuracy, results were compared to find out the best approach to create current land cover/use map of the region. The results of MLC and SVM classification methods were compared for both images.

  15. Voices from the Field: The Perceptions of Teachers and Principals on the Class Size Reduction Program in a Large Urban School District.

    ERIC Educational Resources Information Center

    Munoz, Marco A.; Portes, Pedro R.

    A class size reduction (CSR) program was implemented in a large low-performing urban elementary school district. The CSR program helps schools improve student learning by hiring additional teachers so that children in the early elementary grades can attend smaller classes. This study used a participant-oriented evaluation model to examine the…

  16. 39 CFR 3010.26 - Calculation of unused rate adjustment authority.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... authority for each class is equal to the difference between the maximum allowable percentage change in rates under the applicable rate limitation and the actual percentage change in rates for that class. (c) When... rate adjustment leading to its computation. ...

  17. Maximum inflation of the type 1 error rate when sample size and allocation rate are adapted in a pre-planned interim look.

    PubMed

    Graf, Alexandra C; Bauer, Peter

    2011-06-30

    We calculate the maximum type 1 error rate of the pre-planned conventional fixed sample size test for comparing the means of independent normal distributions (with common known variance) which can be yielded when sample size and allocation rate to the treatment arms can be modified in an interim analysis. Thereby it is assumed that the experimenter fully exploits knowledge of the unblinded interim estimates of the treatment effects in order to maximize the conditional type 1 error rate. The 'worst-case' strategies require knowledge of the unknown common treatment effect under the null hypothesis. Although this is a rather hypothetical scenario it may be approached in practice when using a standard control treatment for which precise estimates are available from historical data. The maximum inflation of the type 1 error rate is substantially larger than derived by Proschan and Hunsberger (Biometrics 1995; 51:1315-1324) for design modifications applying balanced samples before and after the interim analysis. Corresponding upper limits for the maximum type 1 error rate are calculated for a number of situations arising from practical considerations (e.g. restricting the maximum sample size, not allowing sample size to decrease, allowing only increase in the sample size in the experimental treatment). The application is discussed for a motivating example. Copyright © 2011 John Wiley & Sons, Ltd.

  18. Prey life-history and bioenergetic responses across a predation gradient.

    PubMed

    Rennie, M D; Purchase, C F; Shuter, B J; Collins, N C; Abrams, P A; Morgan, G E

    2010-10-01

    To evaluate the importance of non-consumptive effects of predators on prey life histories under natural conditions, an index of predator abundance was developed for naturally occurring populations of a common prey fish, the yellow perch Perca flavescens, and compared to life-history variables and rates of prey energy acquisition and allocation as estimated from mass balance models. The predation index was positively related to maximum size and size at maturity in both male and female P. flavescens, but not with life span or reproductive investment. The predation index was positively related to size-adjusted specific growth rates and growth efficiencies but negatively related to model estimates of size-adjusted specific consumption and activity rates in both vulnerable (small) and invulnerable (large) size classes of P. flavescens. These observations suggest a trade-off between growth and activity rates, mediated by reduced activity in response to increasing predator densities. Lower growth rates and growth efficiencies in populations with fewer predators, despite increased consumption suggests either 1) a reduction in prey resources at lower predator densities or 2) an intrinsic cost of rapid prey growth that makes it unfavourable unless offset by a perceived threat of predation. This study provides evidence of trade-offs between growth and activity rates induced by predation risk in natural prey fish populations and illustrates how behavioural modification induced through predation can shape the life histories of prey fish species. © 2010 The Authors. Journal compilation © 2010 The Fisheries Society of the British Isles.

  19. Estimation of Reineke and Volume-Based Maximum Size-Density Lines For Shortleaf Pine

    Treesearch

    Thomas B. Lynch; Robert F. Wittwer; Douglas J. Stevenson

    2004-01-01

    Maximum size-density relationships for Reineke's stand density index as well as for a relationship based on average tree volume were fitted to data from more than a decade of annual remeasurements of plots in unthinned naturally occurring shor tleaf pine in southeaster n Oklahoma. Reineke's stand density index is based on a maximum line of the form log(N) = a...

  20. 40 CFR 144.28 - Requirements for Class I, II, and III wells authorized by rule.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... proposed test or measurement to be made; (D) The amount, size, and location (by depth) of casing to be left..., internal pressure, and axial loading; (iv) Hole size; (v) Size and grade of all casing strings; and (vi... Class III wells the owner or operator shall provide to the Director a qualitative analysis and ranges in...

  1. Determining stocking, forest type and stand-size class from forest inventory data

    Treesearch

    Mark H. Hansen; Jerold T. Hahn

    1992-01-01

    This paper describes the procedures used by North Central Forest Experiment Station's Forest Inventory and Analysis Work Unit (NCFIA) in determining stocking, forest type, and stand-size class. The stocking procedure assigns a portion of the stocking to individual trees measured on NCFIA 10-point field plots. Stand size and forest type are determined as functions...

  2. Shape Comparison Between 0.4–2.0 and 20–60 lm Cement Particles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Holzer, L.; Flatt, R; Erdogan, S

    Portland cement powder, ground from much larger clinker particles, has a particle size distribution from about 0.1 to 100 {micro}m. An important question is then: does particle shape depend on particle size? For the same cement, X-ray computed tomography has been used to examine the 3-D shape of particles in the 20-60 {micro}m sieve range, and focused ion beam nanotomography has been used to examine the 3-D shape of cement particles found in the 0.4-2.0 {micro}m sieve range. By comparing various kinds of computed particle shape data for each size class, the conclusion is made that, within experimental uncertainty, bothmore » size classes are prolate, but the smaller size class particles, 0.4-2.0 {micro}m, tend to be somewhat more prolate than the 20-60 {micro}m size class. The practical effect of this shape difference on the set-point was assessed using the Virtual Cement and Concrete Testing Laboratory to simulate the hydration of five cement powders. Results indicate that nonspherical aspect ratio is more important in determining the set-point than are the actual shape details.« less

  3. Quantum money with nearly optimal error tolerance

    NASA Astrophysics Data System (ADS)

    Amiri, Ryan; Arrazola, Juan Miguel

    2017-06-01

    We present a family of quantum money schemes with classical verification which display a number of benefits over previous proposals. Our schemes are based on hidden matching quantum retrieval games and they tolerate noise up to 23 % , which we conjecture reaches 25 % asymptotically as the dimension of the underlying hidden matching states is increased. Furthermore, we prove that 25 % is the maximum tolerable noise for a wide class of quantum money schemes with classical verification, meaning our schemes are almost optimally noise tolerant. We use methods in semidefinite programming to prove security in a substantially different manner to previous proposals, leading to two main advantages: first, coin verification involves only a constant number of states (with respect to coin size), thereby allowing for smaller coins; second, the reusability of coins within our scheme grows linearly with the size of the coin, which is known to be optimal. Last, we suggest methods by which the coins in our protocol could be implemented using weak coherent states and verified using existing experimental techniques, even in the presence of detector inefficiencies.

  4. Upper Airway Changes after Orthodontic Extraction Treatment in Adults: A Preliminary Study using Cone Beam Computed Tomography

    PubMed Central

    Zhang, Jingjing; Chen, Gui; Li, Weiran; Xu, Tianmin; Gao, Xuemei

    2015-01-01

    Objective Whether the orthodontic treatment with premolar extraction and maximum anchorage in adults will lead to a narrowed upper airway remains under debated. The study aims to investigate the airway changes after orthodontic extraction treatment in adult patients with Class II and hyperdivergent skeletal malocclusion. Materials and Methods This retrospective study enrolled 18 adults with Class II and hyperdivergent skeletal malocclusion (5 males and 13 females, 24.1 ± 3.8 years of age, BMI 20.33 ± 1.77 kg/m2). And 18 untreated controls were matched 1:1 with the treated patients for age, sex, BMI, and skeletal pattern. CBCT images before and after treatment were obtained. DOLPHIN 11.7 software was used to reconstruct and measure the airway size, hyoid position, and craniofacial structures. Changes in the airway and craniofacial parameters from pre to post treatment were assessed by Wilcoxon signed rank test. Mann-Whitney U test was used in comparisons of the airway parameters between the treated patients and the untreated controls. Significant level was set at 0.05. Results The upper and lower incisors retracted 7.87 mm and 6.10 mm based on the measurement of U1-VRL and L1-VRL (P < 0.01), while the positions of the upper and lower molars (U6-VRL, and L6-VRL) remained stable. Volume, height, and cross-sectional area of the airway were not significantly changed after treatment, while the sagittal dimensions of SPP-SPPW, U-MPW, PAS, and V-LPW were significantly decreased (P < 0.05), and the morphology of the cross sections passing through SPP-SPPW, U-MPW, PAS, and V-LPW became anteroposteriorly compressed (P <0.001). No significant differences in the airway volume, height, and cross-sectional area were found between the treated patients and untreated controls. Conclusions The airway changes after orthodontic treatment with premolar extraction and maximum anchorage in adults are mainly morphological changes with anteroposterior dimension compressed in airway cross sections, rather than a decrease in size. PMID:26588714

  5. Analysis of RF exposure in the head tissues of children and adults

    NASA Astrophysics Data System (ADS)

    Wiart, J.; Hadjem, A.; Wong, M. F.; Bloch, I.

    2008-07-01

    This paper analyzes the radio frequencies (RF) exposure in the head tissues of children using a cellular handset or RF sources (a dipole and a generic handset) at 900, 1800, 2100 and 2400 MHz. Based on magnetic resonance imaging, child head models have been developed. The maximum specific absorption rate (SAR) over 10 g in the head has been analyzed in seven child and six adult heterogeneous head models. The influence of the variability in the same age class is carried out using models based on a morphing technique. The SAR over 1 g in specific tissues has also been assessed in the different types of child and adult head models. Comparisons are performed but nevertheless need to be confirmed since they have been derived from data sets of limited size. The simulations that have been performed show that the differences between the maximum SAR over 10 g estimated in the head models of the adults and the ones of the children are small compared to the standard deviations. But they indicate that the maximum SAR in 1 g of peripheral brain tissues of the child models aged between 5 and 8 years is about two times higher than in adult models. This difference is not observed for the child models of children above 8 years old: the maximum SAR in 1 g of peripheral brain tissues is about the same as the one in adult models. Such differences can be explained by the lower thicknesses of pinna, skin and skull of the younger child models.

  6. Class IA phosphoinositide 3-kinase regulates heart size and physiological cardiac hypertrophy.

    PubMed

    Luo, Ji; McMullen, Julie R; Sobkiw, Cassandra L; Zhang, Li; Dorfman, Adam L; Sherwood, Megan C; Logsdon, M Nicole; Horner, James W; DePinho, Ronald A; Izumo, Seigo; Cantley, Lewis C

    2005-11-01

    Class I(A) phosphoinositide 3-kinases (PI3Ks) are activated by growth factor receptors, and they regulate, among other processes, cell growth and organ size. Studies using transgenic mice overexpressing constitutively active and dominant negative forms of the p110alpha catalytic subunit of class I(A) PI3K have implicated the role of this enzyme in regulating heart size and physiological cardiac hypertrophy. To further understand the role of class I(A) PI3K in controlling heart growth and to circumvent potential complications from the overexpression of dominant negative and constitutively active proteins, we generated mice with muscle-specific deletion of the p85alpha regulatory subunit and germ line deletion of the p85beta regulatory subunit of class I(A) PI3K. Here we show that mice with cardiac deletion of both p85 subunits exhibit attenuated Akt signaling in the heart, reduced heart size, and altered cardiac gene expression. Furthermore, exercise-induced cardiac hypertrophy is also attenuated in the p85 knockout hearts. Despite such defects in postnatal developmental growth and physiological hypertrophy, the p85 knockout hearts exhibit normal contractility and myocardial histology. Our results therefore provide strong genetic evidence that class I(A) PI3Ks are critical regulators for the developmental growth and physiological hypertrophy of the heart.

  7. Examining the effect of publishing of bill sizes to reduce information asymmetry on healthcare costs.

    PubMed

    Wong, C Y; Wu, E; Wong, T Y

    2007-01-01

    Information asymmetry has been offered as a reason for unnecessarily high costs in certain industries where significant information asymmetry traditionally exists between providers and consumers, such as healthcare. The purpose of this paper is to examine the impact of the introduction of publishing of bill size as a means to reduce healthcare costs. Specifically, we aim to examine if this initiative to decrease information asymmetry on healthcare prices between healthcare providers and patients, and between healthcare providers themselves, will lead to lower prices for patients. Bill size data of 29 commonly occurring diagnosis-related groups (DRGs) for two ward classes (B2 and C) over a 16- month period were studied. Each ward class was studied separately, i.e. involving 58 DRG data sets. The mean bill size data as well as that of 50th and 90th percentile bill sizes were examined. The study involved some 46,000 inpatient episodes which occurred in the five public sector acute general hospitals of Singapore. Mean prices dropped by 4.14 percent and 9.64 percent for B2 and C classes, respectively. 50 out of 58 DRG data sets showed a drop in prices. Bill sizes at the 50th percentile dropped by 7.95 percent and 10.12 percent for B2 and C classes, respectively; while at the 90th percentile, the corresponding figures were decreases of 8.01 percent and 11.4 percent for the two ward classes. The act of publishing bill sizes has led to less information asymmetry among providers, thereby facilitating more competitive behaviour among hospitals and lower bill sizes.

  8. Dispersion and sampling of adult Dermacentor andersoni in rangeland in Western North America.

    PubMed

    Rochon, K; Scoles, G A; Lysyk, T J

    2012-03-01

    A fixed precision sampling plan was developed for off-host populations of adult Rocky Mountain wood tick, Dermacentor andersoni (Stiles) based on data collected by dragging at 13 locations in Alberta, Canada; Washington; and Oregon. In total, 222 site-date combinations were sampled. Each site-date combination was considered a sample, and each sample ranged in size from 86 to 250 10 m2 quadrats. Analysis of simulated quadrats ranging in size from 10 to 50 m2 indicated that the most precise sample unit was the 10 m2 quadrat. Samples taken when abundance < 0.04 ticks per 10 m2 were more likely to not depart significantly from statistical randomness than samples taken when abundance was greater. Data were grouped into ten abundance classes and assessed for fit to the Poisson and negative binomial distributions. The Poisson distribution fit only data in abundance classes < 0.02 ticks per 10 m2, while the negative binomial distribution fit data from all abundance classes. A negative binomial distribution with common k = 0.3742 fit data in eight of the 10 abundance classes. Both the Taylor and Iwao mean-variance relationships were fit and used to predict sample sizes for a fixed level of precision. Sample sizes predicted using the Taylor model tended to underestimate actual sample sizes, while sample sizes estimated using the Iwao model tended to overestimate actual sample sizes. Using a negative binomial with common k provided estimates of required sample sizes closest to empirically calculated sample sizes.

  9. Size Class Distribution of Quercus engelmannii (Engelmann Oak) on the Santa Rosa Plateau, Riverside County, California

    Treesearch

    Earl W. Lathrop; Chris Osborne; Anna Rochester; Kevin Yeung; Samuel Soret; Rochelle Hopper

    1991-01-01

    Size class distribution of Quercus engelmannii (Engelmann oak) on the Santa Rosa Plateau was studied to understand whether current recruitment of young oaks is sufficient to maintain the population in spite of high natural mortality and impacts of development in some portions of the plateau woodland. Sapling-size oaks (1-10 cm dbh) made up 5.56 pct...

  10. Universality in a Neutral Evolution Model

    NASA Astrophysics Data System (ADS)

    King, Dawn; Scott, Adam; Maric, Nevena; Bahar, Sonya

    2013-03-01

    Agent-based models are ideal for investigating the complex problems of biodiversity and speciation because they allow for complex interactions between individuals and between individuals and the environment. Presented here is a ``null'' model that investigates three mating types - assortative, bacterial, and random - in phenotype space, as a function of the percentage of random death δ. Previous work has shown phase transition behavior in an assortative mating model with variable fitness landscapes as the maximum mutation size (μ) was varied (Dees and Bahar, 2010). Similarly, this behavior was recently presented in the work of Scott et al. (submitted), on a completely neutral landscape, for bacterial-like fission as well as for assortative mating. Here, in order to achieve an appropriate ``null'' hypothesis, the random death process was changed so each individual, in each generation, has the same probability of death. Results show a continuous nonequilibrium phase transition for the order parameters of the population size and the number of clusters (analogue of species) as δ is varied for three different mutation sizes of the system. The system shows increasing robustness as μ increases. Universality classes and percolation properties of this system are also explored. This research was supported by funding from: University of Missouri Research Board and James S. McDonnell Foundation

  11. Strength of Virginia's 1.

    DOT National Transportation Integrated Search

    1993-01-01

    This study was undertaken to measure what, if any, differences exist in strength between mixtures made with 3/4-in (19-mm) maximum size aggregate and those made with 1/2-in (13-mm) maximum size aggregate. In order to make a comparison, a definition o...

  12. [Effects of forest gap size on the growth and form quality of Taxus wallichina var. mairei in Cunninghamia lanceolata forests].

    PubMed

    Ou, Jian de; Wu, Zhi Zhuang; Luo, Ning

    2016-10-01

    In order to clarify the effects of forest gap size on the growth and stem form quality of Taxus wallichina var. mairei and effectiveness of the precious timbers cultivation, 25 sample plots in Cunninghamia lanceolata forest gaps were established in Mingxi County, Fujian Province, China to determine the indices of the growth, stem form and branching indices of T. wallichina var. mairei seedlings. The relationships between the gap size and growth, stem form and branching were investigated. The 25 sample plots were located at five microhabitats which were classified based on gap size as follows: Class1, 2, 3, 4 and 5, which had a gap size of 25-50 m 2 , 50-75 m 2 , 75-100 m 2 , 100-125 m 2 and 125-150 m 2 , respectively. The evaluation index system of precious timbers was built by using hierarchical analysis. The 5 classes of forest gaps were evaluated comprehensively by using the multiobjective decision making method. The results showed that gap size significantly affected 11 indices, i.e., height, DBH, crown width, forking rate, stem straightness, stem fullness, taperingness, diameter height ratio, height under living branch, interval between branches, and max-branch base diameter. Class1and 2 both significantly promoted the growth of height, DBH and crown width, and both significantly inhibited forking rate and taperingness, and improved stem straightness. Class2 significantly improved stem fullness and diameter height ratio. Class1and 2 significantly improved height under living branch and reduced max-branch base diameter. Class 1 significantly increased interval between branches. Class1and2 significantly improved the comprehensive evaluation score of precious timbers. This study suggested that controlled cutting intensity could be used to create forest gaps of 25-75 m 2 , which improved the precious timber cultivating process of T. wallichina var. mairei in C. lanceolata forests.

  13. POM Pulses: Characterizing the Physical and Chemical Properties of Particulate Organic Matter (POM) Mobilized by Large Storm Events and its Influence on Receiving Fluvial Systems

    NASA Astrophysics Data System (ADS)

    Johnson, E. R.; Rowland, R. D.; Protokowicz, J.; Inamdar, S. P.; Kan, J.; Vargas, R.

    2016-12-01

    Extreme storm events have tremendous erosive energy which is capable of mobilizing vast amounts of material from watershed sources into fluvial systems. This complex mixture of sediment and particulate organic matter (POM) is a nutrient source, and has the potential to impact downstream water quality. The impact of POM on receiving aquatic systems can vary not only by the total amount exported but also by the various sources involved and the particle sizes of POM. This study examines the composition of POM in potential sources and within-event POM by: (1) determining the amount and quality of dissolved organic matter (DOM) that can be leached from coarse, medium and fine particle classes; (2) assessing the C and N content and isotopic character of within-event POM; and (3) coupling physical and chemical properties to evaluate storm event POM influence on stream water. Storm event POM samples and source sediments were collected from a forested headwater catchment (second order stream) in the Piedmont region of Maryland. Samples were sieved into three particle classes - coarse (2mm-1mm), medium (1mm-250µm) and fine (<250µm). Extractions were performed for three particle class sizes and the resulting fluorescent organic matter was analyzed. Carbon (C) and Nitrogen (N) amount, C:N ratio, and isotopic analysis of 13C and 15N were performed on solid state event and source material. Future work will include examination of microbial communities associated with POM particle size classes. Physical size class separation of within-event POM exhibited differences in C:N ratios, δ15N composition, and extracted DOM lability. Smaller size classes exhibited lower C:N ratios, more enriched δ15N and more recalcitrant properties in leached DOM. Source material had varying C:N ratios and contributions to leached DOM. These results indicate that both source and size class strongly influence the POM contribution to fluvial systems during large storm events.

  14. Land-cover classification in a moist tropical region of Brazil with Landsat TM imagery.

    PubMed

    Li, Guiying; Lu, Dengsheng; Moran, Emilio; Hetrick, Scott

    2011-01-01

    This research aims to improve land-cover classification accuracy in a moist tropical region in Brazil by examining the use of different remote sensing-derived variables and classification algorithms. Different scenarios based on Landsat Thematic Mapper (TM) spectral data and derived vegetation indices and textural images, and different classification algorithms - maximum likelihood classification (MLC), artificial neural network (ANN), classification tree analysis (CTA), and object-based classification (OBC), were explored. The results indicated that a combination of vegetation indices as extra bands into Landsat TM multispectral bands did not improve the overall classification performance, but the combination of textural images was valuable for improving vegetation classification accuracy. In particular, the combination of both vegetation indices and textural images into TM multispectral bands improved overall classification accuracy by 5.6% and kappa coefficient by 6.25%. Comparison of the different classification algorithms indicated that CTA and ANN have poor classification performance in this research, but OBC improved primary forest and pasture classification accuracies. This research indicates that use of textural images or use of OBC are especially valuable for improving the vegetation classes such as upland and liana forest classes having complex stand structures and having relatively large patch sizes.

  15. Land-cover classification in a moist tropical region of Brazil with Landsat TM imagery

    PubMed Central

    LI, GUIYING; LU, DENGSHENG; MORAN, EMILIO; HETRICK, SCOTT

    2011-01-01

    This research aims to improve land-cover classification accuracy in a moist tropical region in Brazil by examining the use of different remote sensing-derived variables and classification algorithms. Different scenarios based on Landsat Thematic Mapper (TM) spectral data and derived vegetation indices and textural images, and different classification algorithms – maximum likelihood classification (MLC), artificial neural network (ANN), classification tree analysis (CTA), and object-based classification (OBC), were explored. The results indicated that a combination of vegetation indices as extra bands into Landsat TM multispectral bands did not improve the overall classification performance, but the combination of textural images was valuable for improving vegetation classification accuracy. In particular, the combination of both vegetation indices and textural images into TM multispectral bands improved overall classification accuracy by 5.6% and kappa coefficient by 6.25%. Comparison of the different classification algorithms indicated that CTA and ANN have poor classification performance in this research, but OBC improved primary forest and pasture classification accuracies. This research indicates that use of textural images or use of OBC are especially valuable for improving the vegetation classes such as upland and liana forest classes having complex stand structures and having relatively large patch sizes. PMID:22368311

  16. The numerical evaluation of maximum-likelihood estimates of the parameters for a mixture of normal distributions from partially identified samples

    NASA Technical Reports Server (NTRS)

    Walker, H. F.

    1976-01-01

    Likelihood equations determined by the two types of samples which are necessary conditions for a maximum-likelihood estimate are considered. These equations, suggest certain successive-approximations iterative procedures for obtaining maximum-likelihood estimates. These are generalized steepest ascent (deflected gradient) procedures. It is shown that, with probability 1 as N sub 0 approaches infinity (regardless of the relative sizes of N sub 0 and N sub 1, i=1,...,m), these procedures converge locally to the strongly consistent maximum-likelihood estimates whenever the step size is between 0 and 2. Furthermore, the value of the step size which yields optimal local convergence rates is bounded from below by a number which always lies between 1 and 2.

  17. The synthesis of polyadenylated messenger RNA in herpes simplex type I virus infected BHK cells.

    PubMed

    Harris, T J; Wildy, P

    1975-09-01

    The pattern of polyadenylated messenger RNA (mRNA) synthesis in BHK cell monolayers, infected under defined conditions with herpes simplex type I virus has been investigated by polyacrylamide gel electrophoresis or pulse-labelled RNA isolated by oligo dT-cellulose chromatography. Two classes of mRNA molecules were synthesized in infected cells; these were not detected in uninfected cells. The rate of synthesis of the larger, 18 to 30S RNA class reached a maximum soon after injection and then declined, whereas the rate of synthesis of the 7 to 11 S RNA class did not reach a maximum until much later and did not decline. In the presence of cytosine arabinoside, the rate of mRNA synthesis in infected cells was reduced but the electrophoretic pattern remained the same.

  18. 49 CFR 175.704 - Plutonium shipments.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... lower cargo compartment in the aft-most location that is possible for cargo of its size and weight, and... aboard an aircraft carrying other cargo required to bear any of the following labels: Class 1 (all Divisions), Class 2 (all Divisions), Class 3, Class 4 (all Divisions), Class 5 (all Divisions), or Class 8...

  19. 75 FR 68657 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-08

    ... LLC To Increase the Maximum Order Size Accepted by Floor Broker Systems From 25,000,000 Shares to 99... order size accepted by Floor broker systems from 25,000,000 shares to 99,000,000 shares. The text of the... systems shall accept a maximum order size of 99,000,000, an increase from the current 25,000,000 share...

  20. Harvesting, predation and competition effects on a red coral population

    NASA Astrophysics Data System (ADS)

    Abbiati, M.; Buffoni, G.; Caforio, G.; Di Cola, G.; Santangelo, G.

    A Corallium rubrum population, dwelling in the Ligurian Sea, has been under observation since 1987. Biometric descriptors of colonies (base diameter, weight, number of polyps, number of growth rings) have been recorded and correlated. The population size structure was obtained by distributing the colonies into diameter classes, each size class representing the average annual increment of diameter growth. The population was divided into ten classes, including a recruitment class. This size structure showed a fairly regular trend in the first four classes. The irregularity of survival in the older classes agreed with field observations on harvesting and predation. Demographic parameters such as survival, growth plasticity and natality coefficients were estimated from the experimental data. On this basis a discrete nonlinear model was implemented. The model is based on a kind of density-dependent Leslie matrix, where the feedback term only occurs in survival of the first class; the recruitment function is assumed to be dependent on the total biomass and related to inhibiting effects due to competitive interactions. Stability analysis was applied to steady-state solutions. Numerical simulations of population evolution were carried out under different conditions. The dynamics of settlement and the effects of disturbances such as harvesting, predation and environmental variability were studied.

  1. Spatiotemporal variation of nitrate uptake kinetics within the maize (Zea mays L.) root system is associated with greater nitrate uptake and interactions with architectural phenes.

    PubMed

    York, Larry M; Silberbush, Moshe; Lynch, Jonathan P

    2016-06-01

    Increasing maize nitrogen acquisition efficiency is a major goal for the 21st century. Nitrate uptake kinetics (NUK) are defined by I max and K m, which denote the maximum uptake rate and the affinity of transporters, respectively. Because NUK have been studied predominantly at the molecular and whole-root system levels, little is known about the functional importance of NUK variation within root systems. A novel method was created to measure NUK of root segments that demonstrated variation in NUK among root classes (seminal, lateral, crown, and brace). I max varied among root class, plant age, and nitrate deprivation combinations, but was most affected by plant age, which increased I max, and nitrate deprivation time, which decreased I max K m was greatest for crown roots. The functional-structural simulation SimRoot was used for sensitivity analysis of plant growth to root segment I max and K m, as well as to test interactions of I max with root system architectural phenes. Simulated plant growth was more sensitive to I max than K m, and reached an asymptote near the maximum I max observed in the empirical studies. Increasing the I max of lateral roots had the largest effect on shoot growth. Additive effects of I max and architectural phenes on nitrate uptake were observed. Empirically, only lateral root tips aged 20 d operated at the maximum I max, and simulations demonstrated that increasing all seminal and lateral classes to this maximum rate could increase plant growth by as much as 26%. Therefore, optimizing I max for all maize root classes merits attention as a promising breeding goal. © The Author 2016. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  2. Three-dimensional workstation is useful for measuring the correct size of abdominal aortic aneurysm diameters.

    PubMed

    Ihara, Tsutomu; Komori, Kimihiro; Yamamoto, Kiyohito; Kobayashi, Masayoshi; Banno, Hiroshi; Kodama, Akio

    2013-02-01

    Abdominal aortic aneurysm diameter is usually measured by the maximum minor-axis diameter on axial computed tomography (CT). However, this "traditional" diameter may underestimate the real size, as the aorta is not always straight and the aneurysm shape is sometimes in the form of an ellipse along the cross section. Therefore, we measured maximum major-axis diameters using a three-dimensional (3D) workstation and compared them with the traditional maximum minor-axis diameters measured using thin-slice axial CT. CT data of 141 AAA patients (with fusiform aneurysms) were stored in a 3D workstation. These thin-slice CT images were reviewed on the 3D workstation to obtain curved multiplanar reconstruction images (CPR images). Using the CPR images, we measured the maximum major-axis and minor-axis diameters on CPR and the angle of the aneurysms to the body axis. The mean traditional maximum minor-axis diameter was 51.2 ± 8.2 mm, whereas the mean maximum major-axis diameter on CPR was 54.7 ± 10.1 mm. Sixty eight patients had a mean aneurysm size of <50 mm when measured by the traditional minor-axis diameter. Among these patients, five (7.4%) had a major-axis diameter >55 mm on CPR. The measurement of the traditional maximum minor-axis diameter of aneurysms is useful in the case of most patients. However, the traditional maximum minor-axis diameter may underestimate the real aneurysmal diameter, particularly in patients with an ellipse-shaped aneurysm. The maximum major-axis diameter as measured using CPR images is effective for representing the real aneurysmal size. Copyright © 2013 Elsevier Inc. All rights reserved.

  3. Rotordynamic Feasibility of a Conceptual Variable-Speed Power Turbine Propulsion System for Large Civil Tilt-Rotor Applications

    NASA Technical Reports Server (NTRS)

    Howard, Samuel

    2012-01-01

    A variable-speed power turbine concept is analyzed for rotordynamic feasibility in a Large Civil Tilt-Rotor (LCTR) class engine. Implementation of a variable-speed power turbine in a rotorcraft engine would enable high efficiency propulsion at the high forward velocities anticipated of large tilt-rotor vehicles. Therefore, rotordynamics is a critical issue for this engine concept. A preliminary feasibility study is presented herein to address this concern and identify if variable-speed is possible in a conceptual engine sized for the LCTR. The analysis considers critical speed placement in the operating speed envelope, stability analysis up to the maximum anticipated operating speed, and potential unbalance response amplitudes to determine that a variable-speed power turbine is likely to be challenging, but not impossible to achieve in a tilt-rotor propulsion engine.

  4. An iterative procedure for obtaining maximum-likelihood estimates of the parameters for a mixture of normal distributions

    NASA Technical Reports Server (NTRS)

    Peters, B. C., Jr.; Walker, H. F.

    1978-01-01

    This paper addresses the problem of obtaining numerically maximum-likelihood estimates of the parameters for a mixture of normal distributions. In recent literature, a certain successive-approximations procedure, based on the likelihood equations, was shown empirically to be effective in numerically approximating such maximum-likelihood estimates; however, the reliability of this procedure was not established theoretically. Here, we introduce a general iterative procedure, of the generalized steepest-ascent (deflected-gradient) type, which is just the procedure known in the literature when the step-size is taken to be 1. We show that, with probability 1 as the sample size grows large, this procedure converges locally to the strongly consistent maximum-likelihood estimate whenever the step-size lies between 0 and 2. We also show that the step-size which yields optimal local convergence rates for large samples is determined in a sense by the 'separation' of the component normal densities and is bounded below by a number between 1 and 2.

  5. An iterative procedure for obtaining maximum-likelihood estimates of the parameters for a mixture of normal distributions, 2

    NASA Technical Reports Server (NTRS)

    Peters, B. C., Jr.; Walker, H. F.

    1976-01-01

    The problem of obtaining numerically maximum likelihood estimates of the parameters for a mixture of normal distributions is addressed. In recent literature, a certain successive approximations procedure, based on the likelihood equations, is shown empirically to be effective in numerically approximating such maximum-likelihood estimates; however, the reliability of this procedure was not established theoretically. Here, a general iterative procedure is introduced, of the generalized steepest-ascent (deflected-gradient) type, which is just the procedure known in the literature when the step-size is taken to be 1. With probability 1 as the sample size grows large, it is shown that this procedure converges locally to the strongly consistent maximum-likelihood estimate whenever the step-size lies between 0 and 2. The step-size which yields optimal local convergence rates for large samples is determined in a sense by the separation of the component normal densities and is bounded below by a number between 1 and 2.

  6. Joining strength performances of metal skin and CFRP core laminate structures realized by compression-curing process, with supporting experiments

    NASA Astrophysics Data System (ADS)

    Quagliato, Luca; Jang, Changsoon; Kim, Naksoo

    2018-05-01

    In the recent years, the trend of lightening vehicles and structures of every kind has become an ever-growing issue, both for university and industrial researchers. As demonstrated in previous authors' works, laminate structures made of metal skin (MS) and carbon fiber reinforced polymer (CFRP) core show high specific bending strength properties while granting considerable weight reduction but, so far, no investigations have been carried out on the hole sensitivity and joinability of these hybrid structures. In the present research work, the hole size sensitivity of MS-CFRP structure has been studied by means of uniaxial tensile test on 160mm (length), 25mm (width), 2.0mm (average thickness) specimens bored with Ø06mm, Ø9mm, and Ø12mm holes. The specimen thickness is composed of two metal skins of 0.4mm thickness each, 8×0.2mm CFRP stacked layers and two thin epoxy-based adhesive layers. The specimens have been manufactured by means of a compression-curing process in which the different materials are stacked and, thanks to die pressure and temperature, the curing process is completed in a relatively short time (15˜20 minutes). The specimens have been tested by means of simple tension test showing that, for the MS-CFRP material, the smaller the hole the smaller the maximum bearable load. Moreover, specimens with the same hole sizes have been bolted together with class 12 resistance bolts and tested by means of tensile test, allowing to determine the maximum transferable load between the two MS-CFRP plates. Aiming to prove the improvement in the specific transferable load, experiments on only-steel specimens with the same weight of the MS-CFRP ones and joined with the same method and bolts have been carried out, allowing to conclude that, for the 9mm hole bolted plates, the proposed material has a specific maximum transferable 27% higher than that of the steel composing their skins.

  7. Quantifying Grain-Size Variability of Metal Pollutants in Road-Deposited Sediments Using the Coefficient of Variation

    PubMed Central

    Wang, Xiaoxue; Li, Xuyong

    2017-01-01

    Particle grain size is an important indicator for the variability in physical characteristics and pollutants composition of road-deposited sediments (RDS). Quantitative assessment of the grain-size variability in RDS amount, metal concentration, metal load and GSFLoad is essential to elimination of the uncertainty it causes in estimation of RDS emission load and formulation of control strategies. In this study, grain-size variability was explored and quantified using the coefficient of variation (Cv) of the particle size compositions, metal concentrations, metal loads, and GSFLoad values in RDS. Several trends in grain-size variability of RDS were identified: (i) the medium class (105–450 µm) variability in terms of particle size composition, metal loads, and GSFLoad values in RDS was smaller than the fine (<105 µm) and coarse (450–2000 µm) class; (ii) The grain-size variability in terms of metal concentrations increased as the particle size increased, while the metal concentrations decreased; (iii) When compared to the Lorenz coefficient (Lc), the Cv was similarly effective at describing the grain-size variability, whereas it is simpler to calculate because it did not require the data to be pre-processed. The results of this study will facilitate identification of the uncertainty in modelling RDS caused by grain-size class variability. PMID:28788078

  8. A population model for a long-lived, resprouting chaparral shrub: Adenostoma fasciculatum

    USGS Publications Warehouse

    Stohlgren, Thomas J.; Rundel, Philip W.

    1986-01-01

    Extensive stands of Adenostoma fasciculatum H.&A. (chamise) in the chaparral of California are periodically rejuvenated by fire. A population model based on size-specific demographic characteristics (thinning and fire-caused mortality) was developed to generate probable age distributions within size classes and survivorship curves for typical stands. The model was modified to assess the long term effects of different mortality rates on age distributions. Under observed mean mortality rates (28.7%), model output suggests some shrubs can survive more than 23 fires. A 10% increase in mortality rate by size class slightly shortened the survivorship curve, while a 10% decrease in mortality rate by size class greatly elongated the curve. This approach may be applicable to other long-lived plant species with complex life histories.

  9. The effect of sample size and disease prevalence on supervised machine learning of narrative data.

    PubMed Central

    McKnight, Lawrence K.; Wilcox, Adam; Hripcsak, George

    2002-01-01

    This paper examines the independent effects of outcome prevalence and training sample sizes on inductive learning performance. We trained 3 inductive learning algorithms (MC4, IB, and Naïve-Bayes) on 60 simulated datasets of parsed radiology text reports labeled with 6 disease states. Data sets were constructed to define positive outcome states at 4 prevalence rates (1, 5, 10, 25, and 50%) in training set sizes of 200 and 2,000 cases. We found that the effect of outcome prevalence is significant when outcome classes drop below 10% of cases. The effect appeared independent of sample size, induction algorithm used, or class label. Work is needed to identify methods of improving classifier performance when output classes are rare. PMID:12463878

  10. 49 CFR 192.609 - Change in class location: Required study.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... class location for a segment of an existing steel pipeline operating at hoop stress that is more than 40 percent of SMYS, or indicates that the hoop stress corresponding to the established maximum allowable... actual operating pressure and the corresponding operating hoop stress, taking pressure gradient into...

  11. 49 CFR 192.609 - Change in class location: Required study.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... class location for a segment of an existing steel pipeline operating at hoop stress that is more than 40 percent of SMYS, or indicates that the hoop stress corresponding to the established maximum allowable... actual operating pressure and the corresponding operating hoop stress, taking pressure gradient into...

  12. 40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

  13. 40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

  14. 40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

  15. 40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

  16. 40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

  17. 49 CFR 192.609 - Change in class location: Required study.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... class location for a segment of an existing steel pipeline operating at hoop stress that is more than 40 percent of SMYS, or indicates that the hoop stress corresponding to the established maximum allowable... actual operating pressure and the corresponding operating hoop stress, taking pressure gradient into...

  18. Test Operation Procedure (TOP) 01-1-010A Vehicle Test Course Severity (Surface Roughness)

    DTIC Science & Technology

    2017-12-12

    Department of Agriculture (USDA) classifications, respectively. TABLE 10. PARTICLE SIZE CLASSES CLASS SIZE Cobble and Gravel >4.75 mm particle diameter...ABBREVIATIONS. USCS Unified Soil Classification System USDA United States Department of Agriculture UTM Universal Transverse Mercator WNS wave number

  19. Montane conifer fuel dynamics, Yosemite National Park

    USGS Publications Warehouse

    van Wagtendonk, J.W.; Moore, P.E.

    1997-01-01

    Litter and woody fuel accumulation rates over 7 years for 7 montane Sierra Nevada conifer species, including giant sequoia, ponderosa pine, sugar pine, Jeffrey pine, incense-cedar and white fir. Data are from four sites per size class per species with four size classes each. Nonspatial, georeferenced.

  20. Effect Sizes in Three-Level Cluster-Randomized Experiments

    ERIC Educational Resources Information Center

    Hedges, Larry V.

    2011-01-01

    Research designs involving cluster randomization are becoming increasingly important in educational and behavioral research. Many of these designs involve two levels of clustering or nesting (students within classes and classes within schools). Researchers would like to compute effect size indexes based on the standardized mean difference to…

  1. Louisiana forests: Status and outlook

    Treesearch

    Paul A. Murphy

    1975-01-01

    Between 1964 and 1974, forest area in Louisiana declined 9 percent to 14.5 million acres. Softwood volume increased 31 percent to 9 billion cubic feet, and hardwood declined 7 percent to 7.7 billion. All softwood size classes had increases in volume, and all hardwood size classes had decreases.

  2. Migration Patterns, Densities, and Growth of Neritina punctulata Snails in Rio Espiritu Santo and Rio Mameyes, Northeastern Puerto Rico.

    Treesearch

    MARK PYRON; ALAN P. COVICH

    2003-01-01

    Snail size-frequency distributions in Rios Espiritu Santo and Mameyes, which drain the Luquillo Experimental Forest, Puerto Rico, showed that Neritina punctulata with shell lengths greater than 30 mm were the most abundant size class at upstream sites. The highest densities for all size classes were at the downstream sites. Growth rates were 0.015 mm/day for a large...

  3. 46 CFR 151.50-13 - Propylene oxide.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...) Pressure vessel cargo tanks shall meet the requirements of Class II pressure vessels. (2) Cargo tanks shall be designed for the maximum pressure expected to be encountered during loading, storing and... cargo piping shall be subjected to a hydrostatic test of 11/2 times the maximum pressure to which they...

  4. 46 CFR 151.50-13 - Propylene oxide.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...) Pressure vessel cargo tanks shall meet the requirements of Class II pressure vessels. (2) Cargo tanks shall be designed for the maximum pressure expected to be encountered during loading, storing and... cargo piping shall be subjected to a hydrostatic test of 11/2 times the maximum pressure to which they...

  5. 46 CFR 151.50-13 - Propylene oxide.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...) Pressure vessel cargo tanks shall meet the requirements of Class II pressure vessels. (2) Cargo tanks shall be designed for the maximum pressure expected to be encountered during loading, storing and... cargo piping shall be subjected to a hydrostatic test of 11/2 times the maximum pressure to which they...

  6. 46 CFR 151.50-13 - Propylene oxide.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...) Pressure vessel cargo tanks shall meet the requirements of Class II pressure vessels. (2) Cargo tanks shall be designed for the maximum pressure expected to be encountered during loading, storing and... cargo piping shall be subjected to a hydrostatic test of 11/2 times the maximum pressure to which they...

  7. 46 CFR 151.50-13 - Propylene oxide.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) Pressure vessel cargo tanks shall meet the requirements of Class II pressure vessels. (2) Cargo tanks shall be designed for the maximum pressure expected to be encountered during loading, storing and... cargo piping shall be subjected to a hydrostatic test of 11/2 times the maximum pressure to which they...

  8. Exploration of the Maximum Entropy/Optimal Projection Approach to Control Design Synthesis for Large Space Structures.

    DTIC Science & Technology

    1985-02-01

    Energy Analysis , a branch of dynamic modal analysis developed for analyzing acoustic vibration problems, its present stage of development embodies a...Maximum Entropy Stochastic Modelling and Reduced-Order Design Synthesis is a rigorous new approach to this class of problems. Inspired by Statistical

  9. Capitalizing on Small Class Size. ERIC Digest Number 136.

    ERIC Educational Resources Information Center

    O'Connell, Jessica; Smith, Stuart C.

    This Digest examines school districts' efforts to reap the greatest benefit from smaller classes. Although the report discusses teaching strategies that are most effective in small classes, research has shown that teachers do not significantly change their teaching practices when they move from larger to smaller classes. Smaller classes mean…

  10. Phosphorus content as a function of soil aggregate size and paddy cultivation in highly weathered soils.

    PubMed

    Li, Baozhen; Ge, Tida; Xiao, Heai; Zhu, Zhenke; Li, Yong; Shibistova, Olga; Liu, Shoulong; Wu, Jinshui; Inubushi, Kazuyuki; Guggenberger, Georg

    2016-04-01

    Red soils are the major land resource in subtropical and tropical areas and are characterized by low phosphorus (P) availability. To assess the availability of P for plants and the potential stability of P in soil, two pairs of subtropical red soil samples from a paddy field and an adjacent uncultivated upland were collected from Hunan Province, China. Analysis of total P and Olsen P and sequential extraction was used to determine the inorganic and organic P fractions in different aggregate size classes. Our results showed that the soil under paddy cultivation had lower proportions of small aggregates and higher proportions of large aggregates than those from the uncultivated upland soil. The portion of >2-mm-sized aggregates increased by 31 and 20 % at Taoyuan and Guiyang, respectively. The total P and Olsen P contents were 50-150 and 50-300 % higher, respectively, in the paddy soil than those in the upland soil. Higher inorganic and organic P fractions tended to be enriched in both the smallest and largest aggregate size classes compared to the middle size class (0.02-0.2 mm). Furthermore, the proportion of P fractions was higher in smaller aggregate sizes (<2 mm) than in the higher aggregate sizes (>2 mm). In conclusion, soils under paddy cultivation displayed improved soil aggregate structure, altered distribution patterns of P fractions in different aggregate size classes, and to some extent had enhanced labile P pools.

  11. Transcriptome assembly and candidate genes involved in nutritional programming in the swordtail fish Xiphophorus multilineatus.

    PubMed

    Lu, Yuan; Klimovich, Charlotte M; Robeson, Kalen Z; Boswell, William; Ríos-Cardenas, Oscar; Walter, Ronald B; Morris, Molly R

    2017-01-01

    Nutritional programming takes place in early development. Variation in the quality and/or quantity of nutrients in early development can influence long-term health and viability. However, little is known about the mechanisms of nutritional programming. The live-bearing fish Xiphophorus multilineatus has the potential to be a new model for understanding these mechanisms, given prior evidence of nutritional programming influencing behavior and juvenile growth rate. We tested the hypotheses that nutritional programming would influence behaviors involved in energy homeostasis as well gene expression in X. multilineatus. We first examined the influence of both juvenile environment (varied in nutrition and density) and adult environment (varied in nutrition) on behaviors involved in energy acquisition and energy expenditure in adult male X. multilineatus . We also compared the behavioral responses across the genetically influenced size classes of males. Males stop growing at sexual maturity, and the size classes of can be identified based on phenotypes (adult size and pigment patterns). To study the molecular signatures of nutritional programming, we assembled a de novo transcriptome for X. multilineatus using RNA from brain, liver, skin, testis and gonad tissues, and used RNA-Seq to profile gene expression in the brains of males reared in low quality (reduced food, increased density) and high quality (increased food, decreased density) juvenile environments. We found that both the juvenile and adult environments influenced the energy intake behavior, while only the adult environment influenced energy expenditure. In addition, there were significant interactions between the genetically influenced size classes and the environments that influenced energy intake and energy expenditure, with males from one of the four size classes (Y-II) responding in the opposite direction as compared to the other males examined. When we compared the brains of males of the Y-II size class reared in a low quality juvenile environment to males from the same size class reared in high quality juvenile environment, 131 genes were differentially expressed, including metabolism and appetite master regulator agrp gene. Our study provides evidence for nutritional programming in X. multilineatus , with variation across size classes of males in how juvenile environment and adult diet influences behaviors involved in energy homeostasis. In addition, we provide the first transcriptome of X. multilineatus , and identify a group of candidate genes involved in nutritional programming.

  12. Maximum plant height and the biophysical factors that limit it.

    PubMed

    Niklas, Karl J

    2007-03-01

    Basic engineering theory and empirically determined allometric relationships for the biomass partitioning patterns of extant tree-sized plants show that the mechanical requirements for vertical growth do not impose intrinsic limits on the maximum heights that can be reached by species with woody, self-supporting stems. This implies that maximum tree height is constrained by other factors, among which hydraulic constraints are plausible. A review of the available information on scaling relationships observed for large tree-sized plants, nevertheless, indicates that mechanical and hydraulic requirements impose dual restraints on plant height and thus, may play equally (but differentially) important roles during the growth of arborescent, large-sized species. It may be the case that adaptations to mechanical and hydraulic phenomena have optimized growth, survival and reproductive success rather than longevity and mature size.

  13. Generation of bioaerosols during manual mail unpacking and sorting.

    PubMed

    Brandl, H; Bachofen, R; Bischoff, M

    2005-01-01

    The dynamics of bioaerosol generation in specific occupational environments where mail is manually unpacked and sorted was investigated. Total number of airborne particles was determined in four different size classes (0.3-0.5, 0.5-1, 1-5 and >5 microm) by laser particle counting. Time dependent formation of bioaerosols was monitored by culturing methods and by specific staining followed by flow cytometry. Besides handling of regular mail, specially prepared letters ('spiked letters') were added to the mailbags to deliberately release powdered materials from letters and to simulate high impact loads. These letters contained various dry powdered biological and nonbiological materials such as milk powder, mushrooms, herbs and cat litter. Regarding the four size classes, particulate aerosol composition before mail handling was determined as 83.2 +/- 1.0, 15.2 +/- 0.7, 1.7 +/- 0.4 and 0.04 +/- 0.02%, respectively, whereas the composition changed during sorting to 66.8 +/- 7.9, 22.3 +/- 3.6, 10.4 +/- 4.0 and 0.57 +/- 0.27%, respectively. Mail processing resulted in an increase in culturable airborne bacteria and fungi. Maximum concentrations of bacteria reached 450 CFU m(-3), whereas 270 CFU of fungi were detected. Indoor particle concentrations steadily increased during mail handling mostly associated with particles of diameters >1 microm. However, it was not possible to distinguish spiked letters from nonspiked by simple particle counting and CFU determinations. The dynamics of bioaerosol generation have to be addressed when monitoring specific occupational environments (such as mail sorting facilities) regarding the occurrence of biological particles.

  14. Design and Performance of Insect-Scale Flapping-Wing Vehicles

    NASA Astrophysics Data System (ADS)

    Whitney, John Peter

    Micro-air vehicles (MAVs)---small versions of full-scale aircraft---are the product of a continued path of miniaturization which extends across many fields of engineering. Increasingly, MAVs approach the scale of small birds, and most recently, their sizes have dipped into the realm of hummingbirds and flying insects. However, these non-traditional biologically-inspired designs are without well-established design methods, and manufacturing complex devices at these tiny scales is not feasible using conventional manufacturing methods. This thesis presents a comprehensive investigation of new MAV design and manufacturing methods, as applicable to insect-scale hovering flight. New design methods combine an energy-based accounting of propulsion and aerodynamics with a one degree-of-freedom dynamic flapping model. Important results include analytical expressions for maximum flight endurance and range, and predictions for maximum feasible wing size and body mass. To meet manufacturing constraints, the use of passive wing dynamics to simplify vehicle design and control was investigated; supporting tests included the first synchronized measurements of real-time forces and three-dimensional kinematics generated by insect-scale flapping wings. These experimental methods were then expanded to study optimal wing shapes and high-efficiency flapping kinematics. To support the development of high-fidelity test devices and fully-functional flight hardware, a new class of manufacturing methods was developed, combining elements of rigid-flex printed circuit board fabrication with "pop-up book" folding mechanisms. In addition to their current and future support of insect-scale MAV development, these new manufacturing techniques are likely to prove an essential element to future advances in micro-optomechanics, micro-surgery, and many other fields.

  15. Sella size and jaw bases - Is there a correlation???

    PubMed

    Neha; Mogra, Subraya; Shetty, Vorvady Surendra; Shetty, Siddarth

    2016-01-01

    Sella turcica is an important cephalometric structure and attempts have been made in the past to correlate its dimensions to the malocclusion. However, no study has so far compared the size of sella to the jaw bases that determine the type of malocclusion. The present study was undertaken to find out any such correlation if it exists. Lateral cephalograms of 110 adults consisting of 40 Class I, 40 Class II, and 30 Class III patients were assessed for the measurement of sella length, width, height, and area. The maxillary length, mandibular ramus height, and body length were also measured. The sella dimensions were compared among three malocclusion types by one-way ANOVA. Pearson correlation was calculated between the jaw size and sella dimensions. Furthermore, the ratio of jaw base lengths and sella area were calculated. Mean sella length, width and area were found to be greatest in Class III, followed by Class I and least in Class II though the results were not statistically significant. 3 out of 4 measured dimensions of sella, correlated significantly with mandibular ramus and body length each. However, only one dimension of sella showed significant correlation with maxilla. The mandibular ramus and body length show a nearly constant ratio to sella area (0.83-0.85, 0.64-0.65, respectively) in all the three malocclusions. Thus, mandible has a definite and better correlation to the size of sella turcica.

  16. Determining crop residue type and class using satellite acquired data. M.S. Thesis Progress Report, Jun. 1990

    NASA Technical Reports Server (NTRS)

    Zhuang, Xin

    1990-01-01

    LANDSAT Thematic Mapper (TM) data for March 23, 1987 with accompanying ground truth data for the study area in Miami County, IN were used to determine crop residue type and class. Principle components and spectral ratioing transformations were applied to the LANDSAT TM data. One graphic information system (GIS) layer of land ownership was added to each original image as the eighth band of data in an attempt to improve classification. Maximum likelihood, minimum distance, and neural networks were used to classify the original, transformed, and GIS-enhanced remotely sensed data. Crop residues could be separated from one another and from bare soil and other biomass. Two types of crop residue and four classes were identified from each LANDSAT TM image. The maximum likelihood classifier performed the best classification for each original image without need of any transformation. The neural network classifier was able to improve the classification by incorporating a GIS-layer of land ownership as an eighth band of data. The maximum likelihood classifier was unable to consider this eighth band of data and thus, its results could not be improved by its consideration.

  17. California's Class Size Reduction: Implications for Equity, Practice & Implementation.

    ERIC Educational Resources Information Center

    Wexler, Edward; Izu, JoAnn; Carlos, Lisa; Fuller, Bruce; Hayward, Gerald; Kirst, Mike

    When California implemented its class-size reduction (CSR) program in 1996, a number of questions regarding financial burdens, teacher shortages, scarcity of facilities, and collective bargaining were raised. This first-year implementation study aims to provide some contextual information as background for answering questions, to clarify these…

  18. Effects of Class Size on Alternative Educational Outcomes across Disciplines

    ERIC Educational Resources Information Center

    Cheng, Dorothy A.

    2011-01-01

    This is the first study to use self-reported ratings of student learning, instructor recommendations, and course recommendations as the outcome measure to estimate class size effects, doing so across 24 disciplines. Fixed-effects models controlling for heterogeneous courses and instructors reveal that increasing enrollment has negative and…

  19. 78 FR 42817 - Small Business Size Standards: Waiver of the Nonmanufacturer Rule

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-17

    ... SMALL BUSINESS ADMINISTRATION Small Business Size Standards: Waiver of the Nonmanufacturer Rule AGENCY: U.S. Small Business Administration. ACTION: Notice of intent to rescind the class waiver of the... Manufacturing. SUMMARY: The U. S. Small Business Administration (SBA) intends to rescind a class waiver of the...

  20. Financing Class Size Reduction

    ERIC Educational Resources Information Center

    Achilles, C. M.

    2005-01-01

    Class size reduction has been shown to, among other things, improve academic achievement for all students and particularly for low-income and minority students. With the No Child Left Behind Act's heavy emphasis on scientifically based research, adequate yearly progress, and disaggregated results, one wonders why all children aren't enrolled in…

  1. Sizing Up What Matters.

    ERIC Educational Resources Information Center

    McCluskey, Neal

    "Smaller is better" is often the mantra of school leaders with regard to class size, while the benefits of smaller schools are ignored. Benefits of small classes seem obvious--teachers with fewer students could devote more time to each student. Conducted in 1985-89, Tennessee's Project STAR (Student/Teacher Achievement Ratio) found that…

  2. Influences of Teaching Approaches and Class Size on Undergraduate Mathematical Learning

    ERIC Educational Resources Information Center

    Olson, Jo Clay; Cooper, Sandy; Lougheed, Tom

    2011-01-01

    An issue for many mathematics departments is the success rate of precalculus students. In an effort to increase the success rate, this quantitative study investigated how class size and teaching approach influenced student achievement and students' attitudes towards learning mathematics. Students' achievement and their attitudes toward learning…

  3. Educational Production and Teacher Preferences

    ERIC Educational Resources Information Center

    Bosworth, Ryan; Caliendo, Frank

    2007-01-01

    We develop a simple model of teacher behavior that offers a solution to the ''class size puzzle'' and is useful for analyzing the potential effects of the No Child Left Behind Act. When teachers must allocate limited classroom time between multiple instructional methods, rational teachers may respond to reductions in class size by reallocating…

  4. Biodiversity and body size are linked across metazoans

    PubMed Central

    McClain, Craig R.; Boyer, Alison G.

    2009-01-01

    Body size variation across the Metazoa is immense, encompassing 17 orders of magnitude in biovolume. Factors driving this extreme diversification in size and the consequences of size variation for biological processes remain poorly resolved. Species diversity is invoked as both a predictor and a result of size variation, and theory predicts a strong correlation between the two. However, evidence has been presented both supporting and contradicting such a relationship. Here, we use a new comprehensive dataset for maximum and minimum body sizes across all metazoan phyla to show that species diversity is strongly correlated with minimum size, maximum size and consequently intra-phylum variation. Similar patterns are also observed within birds and mammals. The observations point to several fundamental linkages between species diversification and body size variation through the evolution of animal life. PMID:19324730

  5. Preferential attachment and growth dynamics in complex systems

    NASA Astrophysics Data System (ADS)

    Yamasaki, Kazuko; Matia, Kaushik; Buldyrev, Sergey V.; Fu, Dongfeng; Pammolli, Fabio; Riccaboni, Massimo; Stanley, H. Eugene

    2006-09-01

    Complex systems can be characterized by classes of equivalency of their elements defined according to system specific rules. We propose a generalized preferential attachment model to describe the class size distribution. The model postulates preferential growth of the existing classes and the steady influx of new classes. According to the model, the distribution changes from a pure exponential form for zero influx of new classes to a power law with an exponential cut-off form when the influx of new classes is substantial. Predictions of the model are tested through the analysis of a unique industrial database, which covers both elementary units (products) and classes (markets, firms) in a given industry (pharmaceuticals), covering the entire size distribution. The model’s predictions are in good agreement with the data. The paper sheds light on the emergence of the exponent τ≈2 observed as a universal feature of many biological, social and economic problems.

  6. 32 CFR 269.4 - Cost of living adjustments of civil monetary penalties.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Statement 5,000 5,500 33 U.S.C. 1319(g)(2)(A) § 404Permit Condition Violation, Class I (per violation amount) 10,000 11,000 33 U.S.C. 1319(g)(2)(A) § 404Permit Condition Violation, Class I (maximum amount) 25,000 27,500 33 U.S.C. 1319(g)(2)(B) § 404Permit Condition Violation, Class II (per day amount) 10,000...

  7. The Effects of Model Misspecification and Sample Size on LISREL Maximum Likelihood Estimates.

    ERIC Educational Resources Information Center

    Baldwin, Beatrice

    The robustness of LISREL computer program maximum likelihood estimates under specific conditions of model misspecification and sample size was examined. The population model used in this study contains one exogenous variable; three endogenous variables; and eight indicator variables, two for each latent variable. Conditions of model…

  8. Small size transformer provides high power regulation with low ripple and maximum control

    NASA Technical Reports Server (NTRS)

    Manoli, R.; Ulrich, B. R.

    1971-01-01

    Single, variable, transformer/choke device does work of several. Technique reduces drawer assembly physical size and design and manufacturing cost. Device provides power, voltage current and impedance regulation while maintaining maximum control of linearity and ensuring extremely low ripple. Nulling is controlled to very fine degree.

  9. Camouflage treatment of severe bialveolar protrusion in skeletal Class II using miniscrew anchorage.

    PubMed

    Suzuki, Selly Sayuri; Previdente, Luiz Henrique; Garcez, Aguinaldo Silva; Suzuki, Hideo

    2013-01-01

    The aim of this case report was to demonstrate the efficient use of miniscrew as anchorage in a 12-year-old male patient with skeletal and dental Class II and severe biprotrusion and lips procumbency. It was proposed a compensating orthodontic treatment with 4 premolar extraction and maximum anchorage. Since the patient abandoned treatment after one premolar extraction, loss of anchorage occurred and treatment plan was modified to maximize lower retraction with miniscrew anchorage and distalization of the upper arch using two methods: Class II elastics from lower miniscrews to the sliding jig and modified transpalatal arch using palatal miniscrew. The results showed a significant improvement of his facial appearance, lip protrusion and also dental esthetics and function. It was concluded that miniscrews can provide absolute anchorage for maximum anterior retraction in order to correct dentoalveolar biprotrusion in the presence of limited thickness alveolar bone.

  10. Class Enumeration and Parameter Recovery of Growth Mixture Modeling and Second-Order Growth Mixture Modeling in the Presence of Measurement Noninvariance between Latent Classes

    PubMed Central

    Kim, Eun Sook; Wang, Yan

    2017-01-01

    Population heterogeneity in growth trajectories can be detected with growth mixture modeling (GMM). It is common that researchers compute composite scores of repeated measures and use them as multiple indicators of growth factors (baseline performance and growth) assuming measurement invariance between latent classes. Considering that the assumption of measurement invariance does not always hold, we investigate the impact of measurement noninvariance on class enumeration and parameter recovery in GMM through a Monte Carlo simulation study (Study 1). In Study 2, we examine the class enumeration and parameter recovery of the second-order growth mixture modeling (SOGMM) that incorporates measurement models at the first order level. Thus, SOGMM estimates growth trajectory parameters with reliable sources of variance, that is, common factor variance of repeated measures and allows heterogeneity in measurement parameters between latent classes. The class enumeration rates are examined with information criteria such as AIC, BIC, sample-size adjusted BIC, and hierarchical BIC under various simulation conditions. The results of Study 1 showed that the parameter estimates of baseline performance and growth factor means were biased to the degree of measurement noninvariance even when the correct number of latent classes was extracted. In Study 2, the class enumeration accuracy of SOGMM depended on information criteria, class separation, and sample size. The estimates of baseline performance and growth factor mean differences between classes were generally unbiased but the size of measurement noninvariance was underestimated. Overall, SOGMM is advantageous in that it yields unbiased estimates of growth trajectory parameters and more accurate class enumeration compared to GMM by incorporating measurement models. PMID:28928691

  11. NAS Parallel Benchmarks. 2.4

    NASA Technical Reports Server (NTRS)

    VanderWijngaart, Rob; Biegel, Bryan A. (Technical Monitor)

    2002-01-01

    We describe a new problem size, called Class D, for the NAS Parallel Benchmarks (NPB), whose MPI source code implementation is being released as NPB 2.4. A brief rationale is given for how the new class is derived. We also describe the modifications made to the MPI (Message Passing Interface) implementation to allow the new class to be run on systems with 32-bit integers, and with moderate amounts of memory. Finally, we give the verification values for the new problem size.

  12. Classifying Radio Galaxies with the Convolutional Neural Network

    NASA Astrophysics Data System (ADS)

    Aniyan, A. K.; Thorat, K.

    2017-06-01

    We present the application of a deep machine learning technique to classify radio images of extended sources on a morphological basis using convolutional neural networks (CNN). In this study, we have taken the case of the Fanaroff-Riley (FR) class of radio galaxies as well as radio galaxies with bent-tailed morphology. We have used archival data from the Very Large Array (VLA)—Faint Images of the Radio Sky at Twenty Centimeters survey and existing visually classified samples available in the literature to train a neural network for morphological classification of these categories of radio sources. Our training sample size for each of these categories is ˜200 sources, which has been augmented by rotated versions of the same. Our study shows that CNNs can classify images of the FRI and FRII and bent-tailed radio galaxies with high accuracy (maximum precision at 95%) using well-defined samples and a “fusion classifier,” which combines the results of binary classifications, while allowing for a mechanism to find sources with unusual morphologies. The individual precision is highest for bent-tailed radio galaxies at 95% and is 91% and 75% for the FRI and FRII classes, respectively, whereas the recall is highest for FRI and FRIIs at 91% each, while the bent-tailed class has a recall of 79%. These results show that our results are comparable to that of manual classification, while being much faster. Finally, we discuss the computational and data-related challenges associated with the morphological classification of radio galaxies with CNNs.

  13. Clinical dental application of Er:YAG laser for Class V cavity preparation.

    PubMed

    Matsumoto, K; Nakamura, Y; Mazeki, K; Kimura, Y

    1996-06-01

    Following the development of the ruby laser by Maiman in 1960, the Nd:YAG laser, the CO2 laser, the semiconductor laser, the He-Ne laser, excimer lasers, the argon laser, and finally the Er:YAG laser capable of cutting hard tissue easily were developed and have come to be applied clinically. In the present study, the Er:YAG laser emitting at a wavelength of 2.94 microns developed by Luxar was used for the clinical preparation of class V cavities. Parameters of 8 Hz and approx. 250 mJ/pulse maximum output were used for irradiation. Sixty teeth of 40 patients were used in this clinical study. The Er:YAG laser used in this study was found to be a system suitable for clinical application. No adverse reaction was observed in any of the cases. Class V cavity preparation was performed without inducing any pain in 48/60 cases (80%). All of the 12 cases that complained of mild or severe intraoperative pain had previously complained of cervical dentin hypersensibility during the preoperative examination. Cavity preparation was completed with this laser system in 58/60 cases (91.7%). No treatment-related clinical problems were observed during the follow-up period of approx. 30 days after cavity preparation and resin filling. Cavity preparation took between approx. 10 sec and 3 min and was related more or less to cavity size and depth. Overall clinical evaluation showed no safety problem with very good rating in 49 cases (81.7%).

  14. 40 CFR 147.753 - Existing Class I and III wells authorized by rule.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION CONTROL PROGRAMS Indiana § 147.753 Existing Class I and III wells authorized by rule. Maximum injection pressure. The owner or operator shall limit injection pressure to the lessor of: (a) A value which will not...

  15. A Formal Construction of Term Classes. Technical Report No. TR73-18.

    ERIC Educational Resources Information Center

    Yu, Clement T.

    The computational complexity of a formal process for the construction of term classes for information retrieval is examined. While the process is proven to be difficult computationally, heuristic methods are applied. Experimental results are obtained to illustrate the maximum possible improvement in system performance of retrieval using the formal…

  16. Alternative Fuels Data Center

    Science.gov Websites

    Alternative Fuel Vehicle Conversion Grant Program The Ohio Environmental Protection Agency will administer a one-time, $5 million grant program to replace or convert Class 7 and Class 8 diesel or gasoline time. Maximum grant awards will be 50% of the fuel components of the new vehicle or 50% of the cost of

  17. 40 CFR 147.503 - Existing Class II (except enhanced recovery and hydrocarbon storage) wells authorized by rule.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class II (except enhanced recovery and hydrocarbon storage) wells authorized by rule. 147.503 Section 147.503 Protection of... recovery and hydrocarbon storage) wells authorized by rule. Maximum injection pressure. To meet the...

  18. 40 CFR 147.503 - Existing Class II (except enhanced recovery and hydrocarbon storage) wells authorized by rule.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class II (except enhanced recovery and hydrocarbon storage) wells authorized by rule. 147.503 Section 147.503 Protection of... recovery and hydrocarbon storage) wells authorized by rule. Maximum injection pressure. To meet the...

  19. An analysis of cumulative risks based on biomonitoring data for six phthalates using the Maximum Cumulative Ratio

    EPA Science Inventory

    The Maximum Cumulative Ratio (MCR) quantifies the degree to which a single chemical drives the cumulative risk of an individual exposed to multiple chemicals. Phthalates are a class of chemicals with ubiquitous exposures in the general population that have the potential to cause ...

  20. 78 FR 9035 - Renewal and Revision of a Previously Approved Information Collection; Comment Request; State...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-07

    ... maximum advertised speed, technology type and spectrum (if applicable) for each broadband provider... funding to collect the maximum advertised speed and technology type to which various classes of Community... businesses use the data to identify where broadband is available, the advertised speeds and other information...

  1. 49 CFR 192.503 - General requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... been located and eliminated. (b) The test medium must be liquid, air, natural gas, or inert gas that is...), if air, natural gas, or inert gas is used as the test medium, the following maximum hoop stress limitations apply: Class location Maximum hoop stress allowed as percentage of SMYS Natural gas Air or inert...

  2. 49 CFR 192.503 - General requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... been located and eliminated. (b) The test medium must be liquid, air, natural gas, or inert gas that is...), if air, natural gas, or inert gas is used as the test medium, the following maximum hoop stress limitations apply: Class location Maximum hoop stress allowed as percentage of SMYS Natural gas Air or inert...

  3. U.S. Food Safety and Inspection Service testing for Salmonella in selected raw meat and poultry products in the United States, 1998 through 2003: analysis of set results.

    PubMed

    Naugle, Alecia Larew; Barlow, Kristina E; Eblen, Denise R; Teter, Vanessa; Umholtz, Robert

    2006-11-01

    The U.S. Food Safety and Inspection Service (FSIS) tests sets of samples of selected raw meat and poultry products for Salmonella to ensure that federally inspected establishments meet performance standards defined in the pathogen reduction-hazard analysis and critical control point system (PR-HACCP) final rule. In the present report, sample set results are described and associations between set failure and set and establishment characteristics are identified for 4,607 sample sets collected from 1998 through 2003. Sample sets were obtained from seven product classes: broiler chicken carcasses (n = 1,010), cow and bull carcasses (n = 240), market hog carcasses (n = 560), steer and heifer carcasses (n = 123), ground beef (n = 2,527), ground chicken (n = 31), and ground turkey (n = 116). Of these 4,607 sample sets, 92% (4,255) were collected as part of random testing efforts (A sets), and 93% (4,166) passed. However, the percentage of positive samples relative to the maximum number of positive results allowable in a set increased over time for broilers but decreased or stayed the same for the other product classes. Three factors associated with set failure were identified: establishment size, product class, and year. Set failures were more likely early in the testing program (relative to 2003). Small and very small establishments were more likely to fail than large ones. Set failure was less likely in ground beef than in other product classes. Despite an overall decline in set failures through 2003, these results highlight the need for continued vigilance to reduce Salmonella contamination in broiler chicken and continued implementation of programs designed to assist small and very small establishments with PR-HACCP compliance issues.

  4. Critical dependence of magnetostructural coupling and magnetocaloric effect on particle size in Mn-Fe-Ni-Ge compounds

    PubMed Central

    Wu, Rongrong; Shen, Feiran; Hu, Fengxia; Wang, Jing; Bao, Lifu; Zhang, Lei; Liu, Yao; Zhao, Yingying; Liang, Feixiang; Zuo, Wenliang; Sun, Jirong; Shen, Baogen

    2016-01-01

    Magnetostructural coupling, which is the coincidence of crystallographic and magnetic transition, has obtained intense attention for its abundant magnetoresponse effects and promising technological applications, such as solid-state refrigeration, magnetic actuators and sensors. The hexagonal Ni2In-type compounds have attracted much attraction due to the strong magnetostructural coupling and the resulted giant negative thermal expansion and magnetocaloric effect. However, the as-prepared samples are quite brittle and naturally collapse into powders. Here, we report the effect of particle size on the magnetostructural coupling and magnetocaloric effect in the Ni2In-type Mn-Fe-Ni-Ge compound, which undergoes a large lattice change across the transformation from paramagnetic austenite to ferromagnetic martensite. The disappearance of martensitic transformation in a large amount of austenitic phase with reducing particle size, to our best knowledge, has not been reported up to now. The ratio can be as high as 40.6% when the MnNi0.8Fe0.2Ge bulk was broken into particles in the size range of 5~15 μm. Meanwhile, the remained magnetostructural transition gets wider and the magnetic hysteresis becomes smaller. As a result, the entropy change drops, but the effective cooling power RCeffe increases and attains to the maximum at particles in the range of 20~40 μm. These observations provide constructive information and highly benefit practical applications for this class of novel magnetoresponse materials. PMID:26883719

  5. Finite mixture model: A maximum likelihood estimation approach on time series data

    NASA Astrophysics Data System (ADS)

    Yen, Phoong Seuk; Ismail, Mohd Tahir; Hamzah, Firdaus Mohamad

    2014-09-01

    Recently, statistician emphasized on the fitting of finite mixture model by using maximum likelihood estimation as it provides asymptotic properties. In addition, it shows consistency properties as the sample sizes increases to infinity. This illustrated that maximum likelihood estimation is an unbiased estimator. Moreover, the estimate parameters obtained from the application of maximum likelihood estimation have smallest variance as compared to others statistical method as the sample sizes increases. Thus, maximum likelihood estimation is adopted in this paper to fit the two-component mixture model in order to explore the relationship between rubber price and exchange rate for Malaysia, Thailand, Philippines and Indonesia. Results described that there is a negative effect among rubber price and exchange rate for all selected countries.

  6. Reducing Class Size in New York City: Promise vs. Practice

    ERIC Educational Resources Information Center

    Farrie, Danielle; Johnson, Monete; Lecker, Wendy; Luhm, Theresa

    2016-01-01

    In the landmark school funding litigation, "Campaign for Fiscal Equity v. State" ("CFE"), the highest Court in New York recognized that reasonable class sizes are an essential element of a constitutional "sound basic education." In response to the rulings in the case, in 2007, the Legislature adopted a law mandating…

  7. What Have Researchers Learned from Project STAR?

    ERIC Educational Resources Information Center

    Schanzenbach, Diane Whitmore

    2007-01-01

    Project STAR (Student/Teacher Achievement Ratio) was a large-scale randomized trial of reduced class sizes in kindergarten through the third grade. Because of the scope of the experiment, it has been used in many policy discussions. For example, the California statewide class-size-reduction policy was justified, in part, by the successes of…

  8. Class Size Reduction or Rapid Formative Assessment?: A Comparison of Cost-Effectiveness

    ERIC Educational Resources Information Center

    Yeh, Stuart S.

    2009-01-01

    The cost-effectiveness of class size reduction (CSR) was compared with the cost-effectiveness of rapid formative assessment, a promising alternative for raising student achievement. Drawing upon existing meta-analyses of the effects of student-teacher ratio, evaluations of CSR in Tennessee, California, and Wisconsin, and RAND cost estimates, CSR…

  9. Class Size Reduction in a Large Urban School District: A Mixed Methodology Evaluation Research Study.

    ERIC Educational Resources Information Center

    Munoz, Marco A.

    This study evaluated the Class Size Reduction (CSR) program in 34 elementary schools in Kentucky's Jefferson County Public Schools. The CSR program is a federal initiative to help elementary schools improve student learning by hiring additional teachers. Qualitative data were collected using unstructured interviews, site observations, and document…

  10. Reducing Class Size: What Do We Know?

    ERIC Educational Resources Information Center

    Bascia, Nina

    2010-01-01

    This report provides an overview of findings from the research on primary class size reduction as a strategy to improve student learning. Its purpose is to provide a comprehensive and balanced picture of a very popular educational reform strategy that has often been seen as a "quick fix" for improving students' opportunities to learn in…

  11. Class Size Reduction: Great Hopes, Great Challenges. Policy Brief.

    ERIC Educational Resources Information Center

    WestEd, San Francisco, CA.

    This policy brief examines the benefits and the challenges that accompany class-size reduction (CSR). It suggests that when designing CSR programs, states should carefully assess specific circumstances in their schools as they adopt or modify CSR efforts to avoid the unintended consequences that some programs have experienced. Some of the…

  12. The Effects of Class Size on Students' Academic Achievement

    ERIC Educational Resources Information Center

    Wilson, Claire

    2011-01-01

    The purpose of this quantitative correlational research was to study the relationship between class size and students' academic achievement. Citywide language arts and math test scores for third and fifth grade students in four New York City public schools were examined using a variety of variables including (a) gender, (b) ethnicity, (c) grade…

  13. Relationship of Class-Size to Classroom Processes, Teacher Satisfaction and Pupil Affect: A Meta-Analysis.

    ERIC Educational Resources Information Center

    Smith, Mary Lee; Glass, Gene V.

    Using data from previously completed research, the authors of this report attempted to examine the relationship between class size and measures of outcomes such as student attitudes and behavior, classroom processes and learning environment, and teacher satisfaction. The authors report that statistical integration of the existing research…

  14. Smart Class-Size Policies for Lean Times. SREB Policy Brief

    ERIC Educational Resources Information Center

    Gagne, Jeff

    2012-01-01

    Most states nationwide have had policies for several decades that limit the number of students assigned to public K-12 classrooms. Southern Regional Education Board (SREB) states, led by Tennessee and Texas, spearheaded this effort in the 1980s, and SREB's own "Legislative Briefings" have marked the growth of class-size policies across…

  15. Forest fragmentation of southern U.S. bottomland hardwoods

    Treesearch

    Victor A. Rudis

    1993-01-01

    The magnitude and character of forest fragmentation are evaluated for bottomland hardwoods in the southern United States.Fragment size class is significantly associated with the frequency of bottomland hardwood species, stand size and ownership classes, and land use attributes.Differences in the frequency of indicators of multiple values are apparent. Two diverse...

  16. 40 CFR 113.4 - Size classes and associated liability limits for fixed onshore oil storage facilities, 1,000...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Size classes and associated liability... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS LIABILITY LIMITS FOR... privity and knowledge of the owner or operator, the following limits of liability are established for...

  17. Two Universality Classes for the Many-Body Localization Transition

    NASA Astrophysics Data System (ADS)

    Khemani, Vedika; Sheng, D. N.; Huse, David A.

    2017-08-01

    We provide a systematic comparison of the many-body localization (MBL) transition in spin chains with nonrandom quasiperiodic versus random fields. We find evidence suggesting that these belong to two separate universality classes: the first dominated by "intrinsic" intrasample randomness, and the second dominated by external intersample quenched randomness. We show that the effects of intersample quenched randomness are strongly growing, but not yet dominant, at the system sizes probed by exact-diagonalization studies on random models. Thus, the observed finite-size critical scaling collapses in such studies appear to be in a preasymptotic regime near the nonrandom universality class, but showing signs of the initial crossover towards the external-randomness-dominated universality class. Our results provide an explanation for why exact-diagonalization studies on random models see an apparent scaling near the transition while also obtaining finite-size scaling exponents that strongly violate Harris-Chayes bounds that apply to disorder-driven transitions. We also show that the MBL phase is more stable for the quasiperiodic model as compared to the random one, and the transition in the quasiperiodic model suffers less from certain finite-size effects.

  18. Annual variation in neustonic micro- and meso-plastic particles and zooplankton in the Bay of Calvi (Mediterranean-Corsica).

    PubMed

    Collignon, Amandine; Hecq, Jean-Henri; Galgani, François; Collard, France; Goffart, Anne

    2014-02-15

    The annual variation in neustonic plastic particles and zooplankton was studied in the Bay of Calvi (Corsica) between 30 August 2011 and 7 August 2012. Plastic particles were classified into three size classes, small microplastics (0.2-2mm), large microplastics (2-5mm) and mesoplastics (5-10mm). 74% of the 38 samples contained plastic particles of varying composition: e.g. filaments, polystyrene, thin plastic films. An average concentration of 6.2 particles/100 m(2) was observed. The highest abundance values (69 particles/100 m(2)) observed occurred during periods of low offshore wind conditions. These values rose in the same order of magnitude as in previous studies in the North Western Mediterranean. The relationships between the abundance values of the size classes between zooplankton and plastic particles were then examined. The ratio for the intermediate size class (2-5mm) reached 2.73. This would suggest a potential confusion for predators regarding planktonic prey of this size class. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Mixture models for estimating the size of a closed population when capture rates vary among individuals

    USGS Publications Warehouse

    Dorazio, R.M.; Royle, J. Andrew

    2003-01-01

    We develop a parameterization of the beta-binomial mixture that provides sensible inferences about the size of a closed population when probabilities of capture or detection vary among individuals. Three classes of mixture models (beta-binomial, logistic-normal, and latent-class) are fitted to recaptures of snowshoe hares for estimating abundance and to counts of bird species for estimating species richness. In both sets of data, rates of detection appear to vary more among individuals (animals or species) than among sampling occasions or locations. The estimates of population size and species richness are sensitive to model-specific assumptions about the latent distribution of individual rates of detection. We demonstrate using simulation experiments that conventional diagnostics for assessing model adequacy, such as deviance, cannot be relied on for selecting classes of mixture models that produce valid inferences about population size. Prior knowledge about sources of individual heterogeneity in detection rates, if available, should be used to help select among classes of mixture models that are to be used for inference.

  20. Three tiers of genome evolution in reptiles

    PubMed Central

    Organ, Chris L.; Moreno, Ricardo Godínez; Edwards, Scott V.

    2008-01-01

    Characterization of reptilian genomes is essential for understanding the overall diversity and evolution of amniote genomes, because reptiles, which include birds, constitute a major fraction of the amniote evolutionary tree. To better understand the evolution and diversity of genomic characteristics in Reptilia, we conducted comparative analyses of online sequence data from Alligator mississippiensis (alligator) and Sphenodon punctatus (tuatara) as well as genome size and karyological data from a wide range of reptilian species. At the whole-genome and chromosomal tiers of organization, we find that reptilian genome size distribution is consistent with a model of continuous gradual evolution while genomic compartmentalization, as manifested in the number of microchromosomes and macrochromosomes, appears to have undergone early rapid change. At the sequence level, the third genomic tier, we find that exon size in Alligator is distributed in a pattern matching that of exons in Gallus (chicken), especially in the 101—200 bp size class. A small spike in the fraction of exons in the 301 bp—1 kb size class is also observed for Alligator, but more so for Sphenodon. For introns, we find that members of Reptilia have a larger fraction of introns within the 101 bp–2 kb size class and a lower fraction of introns within the 5–30 kb size class than do mammals. These findings suggest that the mode of reptilian genome evolution varies across three hierarchical levels of the genome, a pattern consistent with a mosaic model of genomic evolution. PMID:21669810

  1. Breast MRI radiomics: comparison of computer- and human-extracted imaging phenotypes.

    PubMed

    Sutton, Elizabeth J; Huang, Erich P; Drukker, Karen; Burnside, Elizabeth S; Li, Hui; Net, Jose M; Rao, Arvind; Whitman, Gary J; Zuley, Margarita; Ganott, Marie; Bonaccio, Ermelinda; Giger, Maryellen L; Morris, Elizabeth A

    2017-01-01

    In this study, we sought to investigate if computer-extracted magnetic resonance imaging (MRI) phenotypes of breast cancer could replicate human-extracted size and Breast Imaging-Reporting and Data System (BI-RADS) imaging phenotypes using MRI data from The Cancer Genome Atlas (TCGA) project of the National Cancer Institute. Our retrospective interpretation study involved analysis of Health Insurance Portability and Accountability Act-compliant breast MRI data from The Cancer Imaging Archive, an open-source database from the TCGA project. This study was exempt from institutional review board approval at Memorial Sloan Kettering Cancer Center and the need for informed consent was waived. Ninety-one pre-operative breast MRIs with verified invasive breast cancers were analysed. Three fellowship-trained breast radiologists evaluated the index cancer in each case according to size and the BI-RADS lexicon for shape, margin, and enhancement (human-extracted image phenotypes [HEIP]). Human inter-observer agreement was analysed by the intra-class correlation coefficient (ICC) for size and Krippendorff's α for other measurements. Quantitative MRI radiomics of computerised three-dimensional segmentations of each cancer generated computer-extracted image phenotypes (CEIP). Spearman's rank correlation coefficients were used to compare HEIP and CEIP. Inter-observer agreement for HEIP varied, with the highest agreement seen for size (ICC 0.679) and shape (ICC 0.527). The computer-extracted maximum linear size replicated the human measurement with p  < 10 -12 . CEIP of shape, specifically sphericity and irregularity, replicated HEIP with both p values < 0.001. CEIP did not demonstrate agreement with HEIP of tumour margin or internal enhancement. Quantitative radiomics of breast cancer may replicate human-extracted tumour size and BI-RADS imaging phenotypes, thus enabling precision medicine.

  2. Dust control effectiveness of drywall sanding tools.

    PubMed

    Young-Corbett, Deborah E; Nussbaum, Maury A

    2009-07-01

    In this laboratory study, four drywall sanding tools were evaluated in terms of dust generation rates in the respirable and thoracic size classes. In a repeated measures study design, 16 participants performed simulated drywall finishing tasks with each of four tools: (1) ventilated sander, (2) pole sander, (3) block sander, and (4) wet sponge. Dependent variables of interest were thoracic and respirable breathing zone dust concentrations. Analysis by Friedman's Test revealed that the ventilated drywall sanding tool produced significantly less dust, of both size classes, than did the other three tools. The pole and wet sanders produced significantly less dust of both size classes than did the block sander. The block sander, the most commonly used tool in drywall finishing operations, produced significantly more dust of both size classes than did the other three tools. When compared with the block sander, the other tools offer substantial dust reduction. The ventilated tool reduced respirable concentrations by 88% and thoracic concentrations by 85%. The pole sander reduced respirable concentrations by 58% and thoracic by 50%. The wet sander produced reductions of 60% and 47% in the respirable and thoracic classes, respectively. Wet sponge sanders and pole sanders are effective at reducing breathing-zone dust concentrations; however, based on its superior dust control effectiveness, the ventilated sander is the recommended tool for drywall finishing operations.

  3. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pokharel, S; Rana, S

    Purpose: purpose of this study is to evaluate the effect of grid size in Eclipse AcurosXB dose calculation algorithm for SBRT lung. Methods: Five cases of SBRT lung previously treated have been chosen for present study. Four of the plans were 5 fields conventional IMRT and one was Rapid Arc plan. All five cases have been calculated with five grid sizes (1, 1.5, 2, 2.5 and 3mm) available for AXB algorithm with same plan normalization. Dosimetric indices relevant to SBRT along with MUs and time have been recorded for different grid sizes. The maximum difference was calculated as a percentagemore » of mean of all five values. All the plans were IMRT QAed with portal dosimetry. Results: The maximum difference of MUs was within 2%. The time increased was as high as 7 times from highest 3mm to lowest 1mm grid size. The largest difference of PTV minimum, maximum and mean dose were 7.7%, 1.5% and 1.6% respectively. The highest D2-Max difference was 6.1%. The highest difference in ipsilateral lung mean, V5Gy, V10Gy and V20Gy were 2.6%, 2.4%, 1.9% and 3.8% respectively. The maximum difference of heart, cord and esophagus dose were 6.5%, 7.8% and 4.02% respectively. The IMRT Gamma passing rate at 2%/2mm remains within 1.5% with at least 98% points passing with all grid sizes. Conclusion: This work indicates the lowest grid size of 1mm available in AXB is not necessarily required for accurate dose calculation. The IMRT passing rate was insignificant or not observed with the reduction of grid size less than 2mm. Although the maximum percentage difference of some of the dosimetric indices appear large, most of them are clinically insignificant in absolute dose values. So we conclude that 2mm grid size calculation is best compromise in light of dose calculation accuracy and time it takes to calculate dose.« less

  4. 7 CFR 51.1995 - U.S. No. 1.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...) Well formed; and, (2) Clean and bright. (3) Free from: (i) Blanks; and, (ii) Broken or split shells. (4... minimum diameter, minimum and maximum diameters, or in accordance with one of the size classifications in Table I. Table I Size classifications Maximum size—Will pass through a round opening of the following...

  5. Application of the Maximum Amplitude-Early Rise Correlation to Cycle 23

    NASA Technical Reports Server (NTRS)

    Willson, Robert M.; Hathaway, David H.

    2004-01-01

    On the basis of the maximum amplitude-early rise correlation, cycle 23 could have been predicted to be about the size of the mean cycle as early as 12 mo following cycle minimum. Indeed, estimates for the size of cycle 23 throughout its rise consistently suggested a maximum amplitude that would not differ appreciably from the mean cycle, contrary to predictions based on precursor information. Because cycle 23 s average slope during the rising portion of the solar cycle measured 2.4, computed as the difference between the conventional maximum (120.8) and minimum (8) amplitudes divided by the ascent duration in months (47), statistically speaking, it should be a cycle of shorter period. Hence, conventional sunspot minimum for cycle 24 should occur before December 2006, probably near July 2006 (+/-4 mo). However, if cycle 23 proves to be a statistical outlier, then conventional sunspot minimum for cycle 24 would be delayed until after July 2007, probably near December 2007 (+/-4 mo). In anticipation of cycle 24, a chart and table are provided for easy monitoring of the nearness and size of its maximum amplitude once onset has occurred (with respect to the mean cycle and using the updated maximum amplitude-early rise relationship).

  6. 49 CFR 172.446 - CLASS 9 label.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... the six white spaces between them. The lower half of the label must be white with the class number “9... 49 Transportation 2 2010-10-01 2010-10-01 false CLASS 9 label. 172.446 Section 172.446... SECURITY PLANS Labeling § 172.446 CLASS 9 label. (a) Except for size and color, the “CLASS 9...

  7. Small is Beautiful When...

    ERIC Educational Resources Information Center

    Dixon, Annabelle

    1980-01-01

    The author, Deputy Head of Chalk Dell Infant School in Hertford, England, reviews research on the effects of class size and analyzes her own experience with a class of 33 and a class of 23 students. (Editor/SJL)

  8. Role of step size and max dwell time in anatomy based inverse optimization for prostate implants

    PubMed Central

    Manikandan, Arjunan; Sarkar, Biplab; Rajendran, Vivek Thirupathur; King, Paul R.; Sresty, N.V. Madhusudhana; Holla, Ragavendra; Kotur, Sachin; Nadendla, Sujatha

    2013-01-01

    In high dose rate (HDR) brachytherapy, the source dwell times and dwell positions are vital parameters in achieving a desirable implant dose distribution. Inverse treatment planning requires an optimal choice of these parameters to achieve the desired target coverage with the lowest achievable dose to the organs at risk (OAR). This study was designed to evaluate the optimum source step size and maximum source dwell time for prostate brachytherapy implants using an Ir-192 source. In total, one hundred inverse treatment plans were generated for the four patients included in this study. Twenty-five treatment plans were created for each patient by varying the step size and maximum source dwell time during anatomy-based, inverse-planned optimization. Other relevant treatment planning parameters were kept constant, including the dose constraints and source dwell positions. Each plan was evaluated for target coverage, urethral and rectal dose sparing, treatment time, relative target dose homogeneity, and nonuniformity ratio. The plans with 0.5 cm step size were seen to have clinically acceptable tumor coverage, minimal normal structure doses, and minimum treatment time as compared with the other step sizes. The target coverage for this step size is 87% of the prescription dose, while the urethral and maximum rectal doses were 107.3 and 68.7%, respectively. No appreciable difference in plan quality was observed with variation in maximum source dwell time. The step size plays a significant role in plan optimization for prostate implants. Our study supports use of a 0.5 cm step size for prostate implants. PMID:24049323

  9. Arabidopsis Class I and Class II TCP Transcription Factors Regulate Jasmonic Acid Metabolism and Leaf Development Antagonistically1[C][W

    PubMed Central

    Danisman, Selahattin; van der Wal, Froukje; Dhondt, Stijn; Waites, Richard; de Folter, Stefan; Bimbo, Andrea; van Dijk, Aalt DJ; Muino, Jose M.; Cutri, Lucas; Dornelas, Marcelo C.; Angenent, Gerco C.; Immink, Richard G.H.

    2012-01-01

    TEOSINTE BRANCHED1/CYCLOIDEA/PROLIFERATING CELL FACTOR1 (TCP) transcription factors control developmental processes in plants. The 24 TCP transcription factors encoded in the Arabidopsis (Arabidopsis thaliana) genome are divided into two classes, class I and class II TCPs, which are proposed to act antagonistically. We performed a detailed phenotypic analysis of the class I tcp20 mutant, showing an increase in leaf pavement cell sizes in 10-d-old seedlings. Subsequently, a glucocorticoid receptor induction assay was performed, aiming to identify potential target genes of the TCP20 protein during leaf development. The LIPOXYGENASE2 (LOX2) and class I TCP9 genes were identified as TCP20 targets, and binding of TCP20 to their regulatory sequences could be confirmed by chromatin immunoprecipitation analyses. LOX2 encodes for a jasmonate biosynthesis gene, which is also targeted by class II TCP proteins that are under the control of the microRNA JAGGED AND WAVY (JAW), although in an antagonistic manner. Mutation of TCP9, the second identified TCP20 target, resulted in increased pavement cell sizes during early leaf developmental stages. Analysis of senescence in the single tcp9 and tcp20 mutants and the tcp9tcp20 double mutants showed an earlier onset of this process in comparison with wild-type control plants in the double mutant only. Both the cell size and senescence phenotypes are opposite to the known class II TCP mutant phenotype in JAW plants. Altogether, these results point to an antagonistic function of class I and class II TCP proteins in the control of leaf development via the jasmonate signaling pathway. PMID:22718775

  10. The effect of crystal shape, size and bimodality on the maximum packing and the rheology of crystal bearing magma

    NASA Astrophysics Data System (ADS)

    Moitra, Pranabendu; Gonnermann, Helge

    2014-05-01

    Magma often contains crystals of various shapes and sizes. We present experimental results on the effect of the shape- and size-distribution of solid particles on the rheological properties of solid-liquid suspensions, which are hydrodynamically analogous to crystal-bearing magmas. The suspensions were comprised of either a single particle shape and size (unimodal) or a mixture of two different particle shapes and sizes (bimodal). For each type of suspension we characterized the dry maximum packing fraction of the particle mixture using the tap density method. We then systematically varied the total volume fraction of particles in the suspension, as well as the relative proportion of the two different particle types in the bimodal suspensions. For each of the resultant mixtures (suspensions) we performed controlled shear stress experiments using a rotational rheometer in parallel-plate geometry spanning 4 orders of magnitude in shear stress. The resultant data curves of shear stress as a function of shear rate were fitted using a Herschel-Bulkley rheological model. We find that the dry maximum packing decreases with increasing particle aspect ratio (ar) and decreasing particle size ratio (Λ). The highest dry maximum packing was obtained at 60-75% volume of larger particles for bimodal spherical particle mixture. Normalized consistency, Kr, defined as the ratio of the consistency of the suspension and the viscosity of the suspending liquid, was fitted using a Krieger-Dougherty model as a function of the total solid volume fraction (φ). The maximum packing fractions (φm) obtained from the shear experimental data fitting of the unimodal suspensions were similar in magnitude with the dry maximum packing fractions of the unimodal particles. Subsequently, we used the dry maximum packing fractions of the bimodal particle mixtures to fit Kr as a function of φ for the bimodal suspensions. We find that Kr increases rapidly for suspensions with larger ar and smaller Λ. We also find that both the apparent yield stress and the shear thinning behavior of the suspensions increase with increasing ar and become significant at φ/φm ≥ 0.4.

  11. A Note on Cluster Effects in Latent Class Analysis

    ERIC Educational Resources Information Center

    Kaplan, David; Keller, Bryan

    2011-01-01

    This article examines the effects of clustering in latent class analysis. A comprehensive simulation study is conducted, which begins by specifying a true multilevel latent class model with varying within- and between-cluster sample sizes, varying latent class proportions, and varying intraclass correlations. These models are then estimated under…

  12. Speech Music Discrimination Using Class-Specific Features

    DTIC Science & Technology

    2004-08-01

    Speech Music Discrimination Using Class-Specific Features Thomas Beierholm...between speech and music . Feature extraction is class-specific and can therefore be tailored to each class meaning that segment size, model orders...interest. Some of the applications of audio signal classification are speech/ music classification [1], acoustical environmental classification [2][3

  13. Statistical Analyses of Femur Parameters for Designing Anatomical Plates.

    PubMed

    Wang, Lin; He, Kunjin; Chen, Zhengming

    2016-01-01

    Femur parameters are key prerequisites for scientifically designing anatomical plates. Meanwhile, individual differences in femurs present a challenge to design well-fitting anatomical plates. Therefore, to design anatomical plates more scientifically, analyses of femur parameters with statistical methods were performed in this study. The specific steps were as follows. First, taking eight anatomical femur parameters as variables, 100 femur samples were classified into three classes with factor analysis and Q-type cluster analysis. Second, based on the mean parameter values of the three classes of femurs, three sizes of average anatomical plates corresponding to the three classes of femurs were designed. Finally, based on Bayes discriminant analysis, a new femur could be assigned to the proper class. Thereafter, the average anatomical plate suitable for that new femur was selected from the three available sizes of plates. Experimental results showed that the classification of femurs was quite reasonable based on the anatomical aspects of the femurs. For instance, three sizes of condylar buttress plates were designed. Meanwhile, 20 new femurs are judged to which classes the femurs belong. Thereafter, suitable condylar buttress plates were determined and selected.

  14. Energy Current Cumulants in One-Dimensional Systems in Equilibrium

    NASA Astrophysics Data System (ADS)

    Dhar, Abhishek; Saito, Keiji; Roy, Anjan

    2018-06-01

    A recent theory based on fluctuating hydrodynamics predicts that one-dimensional interacting systems with particle, momentum, and energy conservation exhibit anomalous transport that falls into two main universality classes. The classification is based on behavior of equilibrium dynamical correlations of the conserved quantities. One class is characterized by sound modes with Kardar-Parisi-Zhang scaling, while the second class has diffusive sound modes. The heat mode follows Lévy statistics, with different exponents for the two classes. Here we consider heat current fluctuations in two specific systems, which are expected to be in the above two universality classes, namely, a hard particle gas with Hamiltonian dynamics and a harmonic chain with momentum conserving stochastic dynamics. Numerical simulations show completely different system-size dependence of current cumulants in these two systems. We explain this numerical observation using a phenomenological model of Lévy walkers with inputs from fluctuating hydrodynamics. This consistently explains the system-size dependence of heat current fluctuations. For the latter system, we derive the cumulant-generating function from a more microscopic theory, which also gives the same system-size dependence of cumulants.

  15. Relationships between wintering waterbirds and invertebrates, sediments and hydrology of coastal marsh ponds

    USGS Publications Warehouse

    Bolduc, F.; Afton, A.D.

    2004-01-01

    We studied relationships among sediment variables (carbon content, C:N, hardness, oxygen penetration, silt-clay fraction), hydrologic variables (dissolved oxygen, salinity, temperature, transparency, water depth), sizes and biomass of common invertebrate classes, and densities of 15 common waterbird species in ponds of impounded freshwater, oligohaline, mesohaline, and unimpounded mesohaline marshes during winters 1997-98 to 1999-2000 on Rockefeller State Wildlife Refuge, Louisiana, USA. Canonical correspondence analysis and forward selection was used to analyze the above variables. Water depth and oxygen penetration were the variables that best segregated habitat characteristics that resulted in maximum densities of common waterbird species. Most common waterbird species were associated with specific marsh types, except Green-winged Teal (Anas crecca) and Northern Shoveler (Anas clypeata). We concluded that hydrologic manipulation of marsh ponds is the best way to manage habitats for these birds, if the hydrology can be controlled adequately.

  16. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ilsche, Thomas; Schuchart, Joseph; Cope, Joseph

    Event tracing is an important tool for understanding the performance of parallel applications. As concurrency increases in leadership-class computing systems, the quantity of performance log data can overload the parallel file system, perturbing the application being observed. In this work we present a solution for event tracing at leadership scales. We enhance the I/O forwarding system software to aggregate and reorganize log data prior to writing to the storage system, significantly reducing the burden on the underlying file system for this type of traffic. Furthermore, we augment the I/O forwarding system with a write buffering capability to limit the impactmore » of artificial perturbations from log data accesses on traced applications. To validate the approach, we modify the Vampir tracing tool to take advantage of this new capability and show that the approach increases the maximum traced application size by a factor of 5x to more than 200,000 processors.« less

  17. Accuracy assessment of percent canopy cover, cover type, and size class

    Treesearch

    H. T. Schreuder; S. Bain; R. C. Czaplewski

    2003-01-01

    Truth for vegetation cover percent and type is obtained from very large-scale photography (VLSP), stand structure as measured by size classes, and vegetation types from a combination of VLSP and ground sampling. We recommend using the Kappa statistic with bootstrap confidence intervals for overall accuracy, and similarly bootstrap confidence intervals for percent...

  18. Principals as Middle Managers: School Leadership during the Implementation of Primary Class Size Reduction Policy in Ontario

    ERIC Educational Resources Information Center

    Flessa, Joseph J.

    2012-01-01

    Previous work on policy implementation has often suggested that schools leave their "thumbprints" on policies received from above. During the implementation of Primary Class Size Reduction (PCS) Initiative in Ontario, Canada, however, school principals spoke with remarkable uniformity about the ways PCS affected their work. This article…

  19. District Resource Capacity and the Effects of Educational Policy: The Case of Primary Class Size Reduction in Ontario

    ERIC Educational Resources Information Center

    Mascall, Blair; Leung, Joannie

    2012-01-01

    In a study of Ontario, Canada's province-wide Primary Class Size Reduction (PCS) Initiative, school districts' ability to direct and support schools was related to their experience with planning and monitoring, interest in innovation, and its human and fiscal resource base. Districts with greater "resource capacity" were able to…

  20. The Causal Effect of Class Size on Academic Achievement: Multivariate Instrumental Variable Estimators with Data Missing at Random

    ERIC Educational Resources Information Center

    Shin, Yongyun; Raudenbush, Stephen W.

    2011-01-01

    This article addresses three questions: Does reduced class size cause higher academic achievement in reading, mathematics, listening, and word recognition skills? If it does, how large are these effects? Does the magnitude of such effects vary significantly across schools? The authors analyze data from Tennessee's Student/Teacher Achievement Ratio…

  1. Relationship between Class Size and Students' Opportunity to Learn Writing in Middle School

    ERIC Educational Resources Information Center

    Tienken, Christopher H.; Achilles, Charles M.

    2009-01-01

    Class-size reduction (CSR) initiatives have demonstrated positive short- and long-term effects in elementary grades. Less is known about CSR influence on achievement in middle grades. Thus, we conducted a non-experimental, longitudinal, explanatory study of CSR influence on writing achievement of 3 independent cohorts of students (n = 123) in…

  2. An Evaluation of the Federal Class-Size Reduction Program in Wake County, North Carolina--1999-2000.

    ERIC Educational Resources Information Center

    Scudder, David F.

    An empirical evaluation of the federal class-size reduction (CSR) program in Wake County, North Carolina, during the 1999-2000 school year is presented. The qualitative process evaluation showed implementation issues involving the mechanics and the meaning of CSR. Often, schools did not understand where CSR occurred because of changing enrollment…

  3. Learning Approaches and Lecture Attendance of Medical Students

    ERIC Educational Resources Information Center

    Bates, Madeleine; Curtis, Sally; Dismore, Harriet

    2018-01-01

    There are arguably many factors that affect the way a student learns. A recent report by the Higher Education Policy Institute (HEPI) and the Higher Education Academy (HEA) on student academic experience in the UK states that class size is an important factor in the quality of the student experience and that smaller class sizes provide greater…

  4. A Plan for the Evaluation of California's Class Size Reduction Initiative.

    ERIC Educational Resources Information Center

    Kirst, Michael; Bomstedt, George; Stecher, Brian

    In July 1996, California began its Class Size Reduction (CSR) Initiative. To gauge the effectiveness of this initiative, an analysis of its objectives and an overview of proposed strategies for evaluating CSR are presented here. An outline of the major challenges that stand between CSR and its mission are provided. These include logistical…

  5. Ontario's Primary Class Size Reduction Initiative: Report on Early Implementation

    ERIC Educational Resources Information Center

    Bascia, Nina

    2010-01-01

    Reduction in the size of classes from Kindergarten to Grade 3 was a major Liberal Party campaign promise in Ontario's 2003 provincial election. It was intended to demonstrate a new government's commitment to improving public education. By the 2008-09 school year, the provincial government's goals had been achieved: over 90% of all primary classes…

  6. You Just Feed Them with a Long-Handled Spoon: Families Evaluate Their Experiences in a Class Size Reduction Reform

    ERIC Educational Resources Information Center

    Graue, M. Elizabeth; Oen, Denise

    2009-01-01

    Emerging from an evaluation of Wisconsin's Student Achievement Guarantee in Education program (SAGE), a multidimensional program popularly known for its class size reduction component, this article examines SAGE's "lighted schoolhouse" initiative aimed to strengthen links between home and school. Drawing on family focus groups held at…

  7. Study of Cost of Distance Education Institutes with Different Size Classes in India.

    ERIC Educational Resources Information Center

    Datt, Ruddar

    A study of the cost of distance education institutes in India with different size classes involved nine institutions. The sample included 47 percent of total enrollment in distance education institutions in India. The study was restricted to recurring costs and examined the shares of different components of costs and the sources of funding. It…

  8. Using Flexible Busing to Meet Average Class Size Targets

    ERIC Educational Resources Information Center

    Felt, Andrew J.; Koelemay, Ryan; Richter, Alexander

    2008-01-01

    This article describes a method of flexible redistricting for K-12 public school districts that allows students from the same geographical region to be bused to different schools, with the goal of meeting average class size (ACS) target ranges. Results of a case study on a geographically large school district comparing this method to a traditional…

  9. Sound Levels in East Texas Schools.

    ERIC Educational Resources Information Center

    Turner, Aaron Lynn

    A survey of sound levels was taken in several Texas schools to determine the amount of noise and sound present by size of class, type of activity, location of building, and the presence of air conditioning and large amounts of glass. The data indicate that class size and relative amounts of glass have no significant bearing on the production of…

  10. The Nevada Class Size Reduction Evaluation Study, 1995.

    ERIC Educational Resources Information Center

    Nevada State Dept. of Education, Carson City.

    A primary purpose for reducing the student-teacher ratio in the early grades is to make students more successful in their later years. This document contains two separate, but interrelated reports that examined two aspects of the 1989 Class Size Reduction (CSR) Act in Nevada. The Act called for a reduction in student-teacher ratios for selected…

  11. Class Size and Student Outcomes: Research and Policy Implications

    ERIC Educational Resources Information Center

    Chingos, Matthew M.

    2013-01-01

    Schools across the United States are facing budgetary pressures on a scale not seen in generations. Times of fiscal exigency force policymakers and education practitioners to pay more attention to the return on various categories of public investment in education. The sizes of the classes in which students are educated are often a focus of these…

  12. 40 CFR 113.4 - Size classes and associated liability limits for fixed onshore oil storage facilities, 1,000...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 23 2012-07-01 2012-07-01 false Size classes and associated liability limits for fixed onshore oil storage facilities, 1,000 barrels or less capacity. 113.4 Section 113.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS LIABILITY LIMITS FOR...

  13. 40 CFR 113.4 - Size classes and associated liability limits for fixed onshore oil storage facilities, 1,000...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 22 2014-07-01 2013-07-01 true Size classes and associated liability limits for fixed onshore oil storage facilities, 1,000 barrels or less capacity. 113.4 Section 113.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS LIABILITY LIMITS FOR...

  14. A Comparison of QEIA and Non-QEIA Schools: Implications of Class Size Reduction

    ERIC Educational Resources Information Center

    Platt, Louise Carolyn Sater

    2013-01-01

    The purpose of this research study is to compare student achievement changes between matched QEIA and non-QEIA schools in an effort to infer effects of the most significant feature of QEIA funding, class size reduction. The study addressed the critical question--are there demonstrated, significant differences in student achievement gains between…

  15. An Examination of Class Size Reduction on Teaching and Learning Processes: A Theoretical Perspective

    ERIC Educational Resources Information Center

    Harfitt, Gary James; Tsui, Amy B. M.

    2015-01-01

    The question of how class size impacts on student learning has been debated for some time, not least because it has substantial financial implications for educational policy. The strength of this debate notwithstanding, results from numerous international studies have been inconclusive. The study from which this paper stems sought to conceptualise…

  16. Examine Middle School Students' Constructivist Environment Perceptions in Turkey: School Location and Class Size

    ERIC Educational Resources Information Center

    Yigit, Nevzat; Alpaslan, Muhammet Mustafa; Cinemre, Yasin; Balcin, Bilal

    2017-01-01

    This study aims to examine the middle school students' perceptions of the classroom learning environment in the science course in Turkey in terms of school location and class size. In the study the Assessing of Constructivist Learning Environment (ACLE) questionnaire was utilized to map students' perceptions of the classroom learning environment.…

  17. What the Research Tells Us: Class Size Reduction. Information Capsule. Volume 1001

    ERIC Educational Resources Information Center

    Romanik, Dale

    2010-01-01

    This Information Capsule examines the background and history in addition to research findings pertaining to class size reduction (CSR). This Capsule concludes that although educational researchers have not definitively agreed upon the effectiveness of CSR, given its almost universal public appeal, there is little doubt it is here to stay in some…

  18. 7 CFR 51.344 - Size.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Standards for Grades of Apples for Processing Size § 51.344 Size. (a) The minimum and maximum sizes or range... the apples determined by the smallest opening through which it will pass. Application of Standards ...

  19. 7 CFR 51.344 - Size.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Standards for Grades of Apples for Processing Size § 51.344 Size. (a) The minimum and maximum sizes or range... the apples determined by the smallest opening through which it will pass. Application of Standards ...

  20. 7 CFR 51.344 - Size.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Standards for Grades of Apples for Processing Size § 51.344 Size. (a) The minimum and maximum sizes or range... the apples determined by the smallest opening through which it will pass. Application of Standards ...

  1. Optimizing Mississippi aggregates for concrete bridge decks.

    DOT National Transportation Integrated Search

    2012-12-01

    AASHTO M 43 Standard Specification for Sizes of Aggregate for Road and Bridge Construction : addresses particle size distribution of material included in various maximum nominal size aggregates. This : particle size distribution requires additi...

  2. Efficient numerical methods for the random-field Ising model: Finite-size scaling, reweighting extrapolation, and computation of response functions.

    PubMed

    Fytas, Nikolaos G; Martín-Mayor, Víctor

    2016-06-01

    It was recently shown [Phys. Rev. Lett. 110, 227201 (2013)PRLTAO0031-900710.1103/PhysRevLett.110.227201] that the critical behavior of the random-field Ising model in three dimensions is ruled by a single universality class. This conclusion was reached only after a proper taming of the large scaling corrections of the model by applying a combined approach of various techniques, coming from the zero- and positive-temperature toolboxes of statistical physics. In the present contribution we provide a detailed description of this combined scheme, explaining in detail the zero-temperature numerical scheme and developing the generalized fluctuation-dissipation formula that allowed us to compute connected and disconnected correlation functions of the model. We discuss the error evolution of our method and we illustrate the infinite limit-size extrapolation of several observables within phenomenological renormalization. We present an extension of the quotients method that allows us to obtain estimates of the critical exponent α of the specific heat of the model via the scaling of the bond energy and we discuss the self-averaging properties of the system and the algorithmic aspects of the maximum-flow algorithm used.

  3. Efficient compression of molecular dynamics trajectory files.

    PubMed

    Marais, Patrick; Kenwood, Julian; Smith, Keegan Carruthers; Kuttel, Michelle M; Gain, James

    2012-10-15

    We investigate whether specific properties of molecular dynamics trajectory files can be exploited to achieve effective file compression. We explore two classes of lossy, quantized compression scheme: "interframe" predictors, which exploit temporal coherence between successive frames in a simulation, and more complex "intraframe" schemes, which compress each frame independently. Our interframe predictors are fast, memory-efficient and well suited to on-the-fly compression of massive simulation data sets, and significantly outperform the benchmark BZip2 application. Our schemes are configurable: atomic positional accuracy can be sacrificed to achieve greater compression. For high fidelity compression, our linear interframe predictor gives the best results at very little computational cost: at moderate levels of approximation (12-bit quantization, maximum error ≈ 10(-2) Å), we can compress a 1-2 fs trajectory file to 5-8% of its original size. For 200 fs time steps-typically used in fine grained water diffusion experiments-we can compress files to ~25% of their input size, still substantially better than BZip2. While compression performance degrades with high levels of quantization, the simulation error is typically much greater than the associated approximation error in such cases. Copyright © 2012 Wiley Periodicals, Inc.

  4. Implicit-Explicit Time Integration Methods for Non-hydrostatic Atmospheric Models

    NASA Astrophysics Data System (ADS)

    Gardner, D. J.; Guerra, J. E.; Hamon, F. P.; Reynolds, D. R.; Ullrich, P. A.; Woodward, C. S.

    2016-12-01

    The Accelerated Climate Modeling for Energy (ACME) project is developing a non-hydrostatic atmospheric dynamical core for high-resolution coupled climate simulations on Department of Energy leadership class supercomputers. An important factor in computational efficiency is avoiding the overly restrictive time step size limitations of fully explicit time integration methods due to the stiffest modes present in the model (acoustic waves). In this work we compare the accuracy and performance of different Implicit-Explicit (IMEX) splittings of the non-hydrostatic equations and various Additive Runge-Kutta (ARK) time integration methods. Results utilizing the Tempest non-hydrostatic atmospheric model and the ARKode package show that the choice of IMEX splitting and ARK scheme has a significant impact on the maximum stable time step size as well as solution quality. Horizontally Explicit Vertically Implicit (HEVI) approaches paired with certain ARK methods lead to greatly improved runtimes. With effective preconditioning IMEX splittings that incorporate some implicit horizontal dynamics can be competitive with HEVI results. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. LLNL-ABS-699187

  5. Adaptive Statistical Language Modeling; A Maximum Entropy Approach

    DTIC Science & Technology

    1994-04-19

    models exploit the immediate past only. To extract information from further back in the document’s history , I use trigger pairs as the basic information...9 2.2 Context-Free Estimation (Unigram) ...... .................... 12 2.3 Short-Term History (Conventional N-gram...12 2.4 Short-term Class History (Class-Based N-gram) ................... 14 2.5 Intermediate Distance ........ ........................... 16

  6. Program of Studies: Industrial Arts: Grades 7-12.

    ERIC Educational Resources Information Center

    Fairfax County Schools, VA.

    The first part of the industrial arts curriculum guide provides brief descriptions of the program and course goals for grades K-12 and a one-page chart of program courses. Part 2 contains unit plans for grades 7-12 which provide unit descriptions, credit values, minimum class times, maximum students per class, prerequisites, and various unit…

  7. 40 CFR 147.1953 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1953 Section 147.1953 Protection of... enhanced recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure...

  8. 40 CFR 147.1953 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1953 Section 147.1953 Protection of... enhanced recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure...

  9. Use of electrothermal atomic absorption spectrometry for size profiling of gold and silver nanoparticles.

    PubMed

    Panyabut, Teerawat; Sirirat, Natnicha; Siripinyanond, Atitaya

    2018-02-13

    Electrothermal atomic absorption spectrometry (ETAAS) was applied to investigate the atomization behaviors of gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) in order to relate with particle size information. At various atomization temperatures from 1400 °C to 2200 °C, the time-dependent atomic absorption peak profiles of AuNPs and AgNPs with varying sizes from 5 nm to 100 nm were examined. With increasing particle size, the maximum absorbance was observed at the longer time. The time at maximum absorbance was found to linearly increase with increasing particle size, suggesting that ETAAS can be applied to provide the size information of nanoparticles. With the atomization temperature of 1600 °C, the mixtures of nanoparticles containing two particle sizes, i.e., 5 nm tannic stabilized AuNPs with 60, 80, 100 nm citrate stabilized AuNPs, were investigated and bimodal peaks were observed. The particle size dependent atomization behaviors of nanoparticles show potential application of ETAAS for providing size information of nanoparticles. The calibration plot between the time at maximum absorbance and the particle size was applied to estimate the particle size of in-house synthesized AuNPs and AgNPs and the results obtained were in good agreement with those from flow field-flow fractionation (FlFFF) and transmission electron microscopy (TEM) techniques. Furthermore, the linear relationship between the activation energy and the particle size was observed. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bhattacharya, Sourav; Dialektopoulos, Konstantinos F.; Romano, Antonio Enea

    The maximum size of a cosmic structure is given by the maximum turnaround radius—the scale where the attraction due to its mass is balanced by the repulsion due to dark energy. We derive generic formulae for the estimation of the maximum turnaround radius in any theory of gravity obeying the Einstein equivalence principle, in two situations: on a spherically symmetric spacetime and on a perturbed Friedman-Robertson-Walker spacetime. We show that the two formulae agree. As an application of our formula, we calculate the maximum turnaround radius in the case of the Brans-Dicke theory of gravity. We find that for thismore » theory, such maximum sizes always lie above the ΛCDM value, by a factor 1 + 1/3ω, where ω>> 1 is the Brans-Dicke parameter, implying consistency of the theory with current data.« less

  11. Large variations in diurnal and seasonal patterns of sap flux among Aleppo pine trees in semi-arid forest reflect tree-scale hydraulic adjustments

    NASA Astrophysics Data System (ADS)

    Preisler, Yakir; Tatarinov, Fyodor; Rohatyn, Shani; Rotenberg, Eyal; Grünzweig, José M.; Klein, Tamir; Yakir, Dan

    2015-04-01

    Adjustments and adaptations of trees to drought vary across different biomes, species and habitats, with important implications for tree mortality and forest dieback associated with global climate change. The aim of this study was to investigate possible links between the patterns of variations in water flux dynamics and drought resistance in Aleppo pine (Pinus halepensis) trees in a semi-arid stand (Yatir forest, Israel). We measured sap flow (SF) and variations in stem diameter, complemented with short-term campaigns of leaf-scale measurements of water vapour and CO2 gas exchange, branch water potential and hydraulic conductivity, as well as eddy flux measurements of evapotranspiration (ET) from a permanent flux tower at the site. SF rates were well synchronized with ET, reaching maximum rates during midday in all trees during the rainy season (Dec-Apr). However, during the dry season (May-Nov), the daily trend in the rates of SF greatly varied among trees, allowing classification into three tree classes: 1) trees with SF maximum rate constantly occurring in mid-day (12:00-13:00); 2)trees showing a shift to an early morning SF peak (04:00-06:00); and 3) trees shifting their daily SF peak to the evening (16:00-18:00). This classification did not change during the four years study period, between 2010 and 2014. Checking for correlation of tree parameters as DBH, tree height, crown size, and competition indices with rates of SF, indicated that timing of maximum SF in summer was mainly related to tree size (DBH), when large trees tended to have a later SF maximum. Dendrometer measurements indicated that large trees (high DBH) had maximum daily diameter in the morning during summer and winter, while small trees typically had maximum daily diameter during midday and afternoon in winter and summer, respectively. Leaf-scale transpiration (T) measurements showed typical morning peak in all trees, and another peak in the afternoon in large trees only. Different diurnal curves observed during the dry season, indicated that water potential and hydraulic conductivity values in larger trees restored from midday depression earlier than in smaller ones. The results demonstrate large heterogeneity in the behaviour related to tree water relations among trees of the same species and in the same stand. The combination of diurnal leaf-scale measurements, SF and changes in DBH demonstrated the different strategies of individual trees of different sizes. Large trees with sufficient internal water storage can more freely manipulate their water storage capacity, with reduced dependence on environmental conditions (e.g., morning and afternoon peaks of T). On the other hand, during the dry summer small trees with insufficient internal water storage are strongly restricted by low soil water availability and extreme environmental conditions, which is expressed in only one peak of T, midday to afternoon shift of diurnal DBH maximum, and shift in SF to predawn when soil water potential is highest. Refilling of internal water storage seems to be in the afternoon/evening since T becomes smaller than SF and DBH increases. Reliance on external water availability in small trees might be insufficient during long drought episodes when soil water content decreases below threshold required for extraction by the trees, leading to increased tree mortality in small DBH trees.

  12. Environmental characteristics and student physical activity in PE class: findings from two large urban areas of Texas.

    PubMed

    Skala, Katherine A; Springer, Andrew E; Sharma, Shreela V; Hoelscher, Deanna M; Kelder, Steven H

    2012-05-01

    Physical education (PE) classes provide opportunities for children to be active. This study examined the associations between specific environmental characteristics (teacher characteristics; class size, duration and location; and lesson context) and elementary school-aged children's moderate-to-vigorous activity (MVPA) during PE. Environmental characteristics and student activity levels were measured in 211 third-, fourth-, and fifth-grade PE classes in 74 Texas public schools using SOFIT direct observation. Students engaged in less than half their PE class time in MVPA (38%), while approximately 25% of class time was spent in classroom management. Percent time in MVPA was significantly higher in outdoor classes compared with indoors (41.4% vs. 36.1%, P = .037). Larger (P = .044) and longer (P = .001) classes were negatively associated with percentage of MVPA and positively correlated with time spent in management (P < .001). Findings suggest that children's activity may be influenced by environmental factors such as class size, location, and lesson contexts. These findings hold important policy implications for PE class organization and the need for strategies that maximize children's MVPA. Further research is needed to test the causal association of these factors with student MVPA.

  13. Maximum size-density relationships for mixed-hardwood forest stands in New England

    Treesearch

    Dale S. Solomon; Lianjun Zhang

    2000-01-01

    Maximum size-density relationships were investigated for two mixed-hardwood ecological types (sugar maple-ash and beech-red maple) in New England. Plots meeting type criteria and undergoing self-thinning were selected for each habitat. Using reduced major axis regression, no differences were found between the two ecological types. Pure species plots (the species basal...

  14. Evaluation of statistical treatments of left-censored environmental data using coincident uncensored data sets. II. Group comparisons

    USGS Publications Warehouse

    Antweiler, Ronald C.

    2015-01-01

    The main classes of statistical treatments that have been used to determine if two groups of censored environmental data arise from the same distribution are substitution methods, maximum likelihood (MLE) techniques, and nonparametric methods. These treatments along with using all instrument-generated data (IN), even those less than the detection limit, were evaluated by examining 550 data sets in which the true values of the censored data were known, and therefore “true” probabilities could be calculated and used as a yardstick for comparison. It was found that technique “quality” was strongly dependent on the degree of censoring present in the groups. For low degrees of censoring (<25% in each group), the Generalized Wilcoxon (GW) technique and substitution of √2/2 times the detection limit gave overall the best results. For moderate degrees of censoring, MLE worked best, but only if the distribution could be estimated to be normal or log-normal prior to its application; otherwise, GW was a suitable alternative. For higher degrees of censoring (each group >40% censoring), no technique provided reliable estimates of the true probability. Group size did not appear to influence the quality of the result, and no technique appeared to become better or worse than other techniques relative to group size. Finally, IN appeared to do very well relative to the other techniques regardless of censoring or group size.

  15. Determining the effect of grain size and maximum induction upon coercive field of electrical steels

    NASA Astrophysics Data System (ADS)

    Landgraf, Fernando José Gomes; da Silveira, João Ricardo Filipini; Rodrigues-Jr., Daniel

    2011-10-01

    Although theoretical models have already been proposed, experimental data is still lacking to quantify the influence of grain size upon coercivity of electrical steels. Some authors consider a linear inverse proportionality, while others suggest a square root inverse proportionality. Results also differ with regard to the slope of the reciprocal of grain size-coercive field relation for a given material. This paper discusses two aspects of the problem: the maximum induction used for determining coercive force and the possible effect of lurking variables such as the grain size distribution breadth and crystallographic texture. Electrical steel sheets containing 0.7% Si, 0.3% Al and 24 ppm C were cold-rolled and annealed in order to produce different grain sizes (ranging from 20 to 150 μm). Coercive field was measured along the rolling direction and found to depend linearly on reciprocal of grain size with a slope of approximately 0.9 (A/m)mm at 1.0 T induction. A general relation for coercive field as a function of grain size and maximum induction was established, yielding an average absolute error below 4%. Through measurement of B50 and image analysis of micrographs, the effects of crystallographic texture and grain size distribution breadth were qualitatively discussed.

  16. 7 CFR 51.2836 - Size classifications.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 2 2012-01-01 2012-01-01 false Size classifications. 51.2836 Section 51.2836...) Size Classifications § 51.2836 Size classifications. The size of onions may be specified in accordance with one of the following classifications. Size designation Minimum diameter Inches Millimeters Maximum...

  17. 7 CFR 51.2836 - Size classifications.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Size classifications. 51.2836 Section 51.2836...) Size Classifications § 51.2836 Size classifications. The size of onions may be specified in accordance with one of the following classifications. Size designation Minimum diameter Inches Millimeters Maximum...

  18. 7 CFR 51.2836 - Size classifications.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Size classifications. 51.2836 Section 51.2836...) Size Classifications § 51.2836 Size classifications. The size of onions may be specified in accordance with one of the following classifications. Size designation Minimum diameter Inches Millimeters Maximum...

  19. Stability numerical analysis of soil cave in karst area to drawdown of underground water level

    NASA Astrophysics Data System (ADS)

    Mo, Yizheng; Xiao, Rencheng; Deng, Zongwei

    2018-05-01

    With the underground water level falling, the reliable estimates of the stability and deformation characteristics of soil caves in karst region area are required for analysis used for engineering design. Aimed at this goal, combined with practical engineering and field geotechnical test, detail analysis on vertical maximum displacement of top, vertical maximum displacement of surface, maximum principal stress and maximum shear stress were conducted by finite element software, with an emphasis on two varying factors: the size and the depth of soil cave. The calculations on the soil cave show that, its stability of soil cave is affected by both the size and depth, and only when extending a certain limit, the collapse occurred along with the falling of underground water; Additionally, its maximum shear stress is in arch toes, and its deformation curve trend of maximum displacement is similar to the maximum shear stress, which further verified that the collapse of soil cave was mainly due to shear-failure.

  20. Capitalizando en los cursos pequenos (Capitalizing on Small Class Size). ERIC Digest.

    ERIC Educational Resources Information Center

    O'Connell, Jessica; Smith, Stuart C.

    This digest in Spanish examines school districts' efforts to reap the greatest benefit from smaller classes. Although the report discusses teaching strategies that are most effective in small classes, research has shown that teachers do not significantly change their teaching practices when they move from larger to smaller classes. Although…

  1. The Effectiveness of learning materials based on multiple intelligence on the understanding of global warming

    NASA Astrophysics Data System (ADS)

    Liliawati, W.; Purwanto; Zulfikar, A.; Kamal, R. N.

    2018-05-01

    This study aims to examine the effectiveness of the use of teaching materials based on multiple intelligences on the understanding of high school students’ material on the theme of global warming. The research method used is static-group pretest-posttest design. Participants of the study were 60 high school students of XI class in one of the high schools in Bandung. Participants were divided into two classes of 30 students each for the experimental class and control class. The experimental class uses compound-based teaching materials while the experimental class does not use a compound intelligence-based teaching material. The instrument used is a test of understanding of the concept of global warming with multiple choices form amounted to 15 questions and 5 essay items. The test is given before and after it is applied to both classes. Data analysis using N-gain and effect size. The results obtained that the N-gain for both classes is in the medium category and the effectiveness of the use of teaching materials based on the results of effect-size test results obtained in the high category.

  2. Community Structure of Filamentous, Sheath-Building Sulfur Bacteria, Thioploca spp., off the Coast of Chile.

    PubMed

    Schulz, H N; Jorgensen, B B; Fossing, H A; Ramsing, N B

    1996-06-01

    The filamentous sulfur bacteria Thioploca spp. produce dense bacterial mats in the shelf area off the coast of Chile and Peru. The mat consists of common sheaths, shared by many filaments, that reach 5 to 10 cm down into the sediment. The structure of the Thioploca communities off the Bay of Concepcion was investigated with respect to biomass, species distribution, and three-dimensional orientation of the sheaths. Thioploca sheaths and filaments were found across the whole shelf area within the oxygen minimum zone. The maximum wet weight of sheaths, 800 g m(sup-2), was found at a depth of 90 m. The bacterial filaments within the sheaths contributed about 10% of this weight. The highest density of filaments was found within the uppermost 1 cm of the mat. On the basis of diameter classes, it was possible to distinguish populations containing only Thioploca spp. from mixed populations containing Beggiatoa spp. Three distinct size classes of Thioploca spp. were found, two of which have been described previously as Thioploca araucae and Thioploca chileae. Many Thioploca filaments did not possess a visible sheath, and about 20% of the sheaths contained more than one Thioploca species. The three-dimensional sheath structure showed that Thioploca filaments can move from the surface and deep into the sediment.

  3. Settlement and post-settlement survival rates of the white seabream (Diplodus sargus) in the western Mediterranean Sea

    PubMed Central

    Cuadros, Amalia; Basterretxea, Gotzon; Cardona, Luis; Cheminée, Adrien; Hidalgo, Manuel

    2018-01-01

    Survival during the settlement window is a limiting variable for recruitment. The survival is believed to be strongly determined by biological interactions and sea conditions, however it has been poorly investigated. We examined the settlement patterns related to relevant biotic and abiotic factors (i.e. Density-dependence, wind stress, wave height and coastal current velocity) potentially determining post-settler survival rates of a coastal necto-benthic fish of wide distribution in the Mediterranean and eastern Atlantic, the white seabream (Diplodus sargus). An observational study of the demography of juveniles of this species was carried out at six coves in Menorca Island (Balearic Islands, western Mediterranean). Three of the coves were located in the northern and wind exposed coast, at the Northeast (NE) side; while the other three were found along the southern and sheltered coast, at the Southwest (SW) side of the island. The settlement period extended from early May to late June and maximum juvenile densities at the sampling sites varied between 5 and 11 ind. m-1 with maximum values observed in late May simultaneously occurring in the two coasts. Our analysis of juvenile survival, based on the interpretation of the observed patters using an individual based model (IBM), revealed two stages in the size-mortality relationships. An initial density-dependent stage was observed for juveniles up to 20 mm TL, followed by a density independent stage when other factors dominated the survival at sizes > 20 mm TL. No significant environmental effects were observed for the small size class (<20mm TL). Different significant environmental effects affecting NE and SW coves were observed for the medium (20-30mm TL) and large (>30mm TL) size class. In the NE, the wind stress consistently affected the density of fish of 20–30 mm and >30 mm TL with a dome-shape effect with higher densities at intermediate values of wind stress and negative effect at the extremes. The best models applied in the SW coves showed a significant non-linear negative effect on fish density that was also consistent for both groups 20–30 mm and >30 mm TL. Higher densities were observed at low values of wave height in the two groups. Because of these variations, the number of juveniles present at the end of the period was unrelated to their initial density and average survival varied among locations. In consequence, recruitment was (1) primarily limited by denso-dependient procedures at settlement stage, and (2) by sea conditions at post-settlement, where extreme wave conditions depleted juveniles. Accordingly, regional hydrodynamic conditions during the settlement season produced significant impacts on the juvenile densities depending on their size and with contrasted effects in respectto cove orientation. The similar strength in larval supply between coves, in addition to the similar mean phenology for settlers in the north and south of the Island, suggests that all fish may come from the same parental reproductive pool. These factors should be taken into account when assessing relationships between settlers, recruits and adults of white seabream. PMID:29324758

  4. Multiclass classification of microarray data samples with a reduced number of genes

    PubMed Central

    2011-01-01

    Background Multiclass classification of microarray data samples with a reduced number of genes is a rich and challenging problem in Bioinformatics research. The problem gets harder as the number of classes is increased. In addition, the performance of most classifiers is tightly linked to the effectiveness of mandatory gene selection methods. Critical to gene selection is the availability of estimates about the maximum number of genes that can be handled by any classification algorithm. Lack of such estimates may lead to either computationally demanding explorations of a search space with thousands of dimensions or classification models based on gene sets of unrestricted size. In the former case, unbiased but possibly overfitted classification models may arise. In the latter case, biased classification models unable to support statistically significant findings may be obtained. Results A novel bound on the maximum number of genes that can be handled by binary classifiers in binary mediated multiclass classification algorithms of microarray data samples is presented. The bound suggests that high-dimensional binary output domains might favor the existence of accurate and sparse binary mediated multiclass classifiers for microarray data samples. Conclusions A comprehensive experimental work shows that the bound is indeed useful to induce accurate and sparse multiclass classifiers for microarray data samples. PMID:21342522

  5. Fractionation of distillers dried grains with solubles (DDGS) by sieving and winnowing.

    PubMed

    Liu, KeShun

    2009-12-01

    Four commercial samples of distillers dried grains with solubles (DDGS) were sieved. All sieved fractions except for the pan fraction, constituting about 90% of original mass, were then winnowed with an air blast seed cleaner. Sieving was effective in producing fractions with varying composition. As the particle size decreased, protein and ash contents increased, and total carbohydrate (CHO) decreased. Winnowing sieved fractions was also effective in shifting composition, particularly for larger particle classes. Heavy sub-fractions were enriched in protein, oil and ash, while light sub-fractions were enriched for CHO. For protein, the combination of the two procedures resulted in a maximum 56.4% reduction in a fraction and maximum 60.2% increase in another fraction. As airflow velocity increased, light sub-fraction mass increased, while the compositional difference between the heavy and light sub-fractions decreased. Winnowing three times at a lower velocity was as effective as winnowing one time at a medium velocity. Winnowing the whole DDGS was much less effective than winnowing sieved fractions in changing composition, but sieving winnowed fractions was more effective than sieving whole DDGS. The two combination sequences gave comparable overall effects but sieving followed by winnowing is recommended because it requires less time. Regardless of combinational sequence, the second procedure was more effective in shifting composition than the first procedure.

  6. The complete mitochondrial genome of the dwarf tapeworm Hymenolepis nana--a neglected zoonotic helminth.

    PubMed

    Cheng, Tian; Liu, Guo-Hua; Song, Hui-Qun; Lin, Rui-Qing; Zhu, Xing-Quan

    2016-03-01

    Hymenolepis nana, commonly known as the dwarf tapeworm, is one of the most common tapeworms of humans and rodents and can cause hymenolepiasis. Although this zoonotic tapeworm is of socio-economic significance in many countries of the world, its genetics, systematics, epidemiology, and biology are poorly understood. In the present study, we sequenced and characterized the complete mitochondrial (mt) genome of H. nana. The mt genome is 13,764 bp in size and encodes 36 genes, including 12 protein-coding genes, 2 ribosomal RNA, and 22 transfer RNA genes. All genes are transcribed in the same direction. The gene order and genome content are completely identical with their congener Hymenolepis diminuta. Phylogenetic analyses based on concatenated amino acid sequences of 12 protein-coding genes by Bayesian inference, Maximum likelihood, and Maximum parsimony showed the division of class Cestoda into two orders, supported the monophylies of both the orders Cyclophyllidea and Pseudophyllidea. Analyses of mt genome sequences also support the monophylies of the three families Taeniidae, Hymenolepididae, and Diphyllobothriidae. This novel mt genome provides a useful genetic marker for studying the molecular epidemiology, systematics, and population genetics of the dwarf tapeworm and should have implications for the diagnosis, prevention, and control of hymenolepiasis in humans.

  7. Resource allocation to reproduction in animals.

    PubMed

    Kooijman, Sebastiaan A L M; Lika, Konstadia

    2014-11-01

    The standard Dynamic Energy Budget (DEB) model assumes that a fraction κ of mobilised reserve is allocated to somatic maintenance plus growth, while the rest is allocated to maturity maintenance plus maturation (in embryos and juveniles) or reproduction (in adults). All DEB parameters have been estimated for 276 animal species from most large phyla and all chordate classes. The goodness of fit is generally excellent. We compared the estimated values of κ with those that would maximise reproduction in fully grown adults with abundant food. Only 13% of these species show a reproduction rate close to the maximum possible (assuming that κ can be controlled), another 4% have κ lower than the optimal value, and 83% have κ higher than the optimal value. Strong empirical support hence exists for the conclusion that reproduction is generally not maximised. We also compared the parameters of the wild chicken with those of races selected for meat and egg production and found that the latter indeed maximise reproduction in terms of κ, while surface-specific assimilation was not affected by selection. We suggest that small values of κ relate to the down-regulation of maximum body size, and large values to the down-regulation of reproduction. We briefly discuss the ecological context for these findings. © 2014 The Authors. Biological Reviews © 2014 Cambridge Philosophical Society.

  8. Class Size and Teacher Load in High School English. New York State English Council Monography No. 8.

    ERIC Educational Resources Information Center

    Wade, Durlyn E.

    To determine the class size and teaching load of secondary teachers of English in New York state, the Research Committee of the State English Council mailed 1,093 questionnaires to chairmen of English Departments in the state's registered public and private secondary schools. The 694 usable replies--representing 4,410 full-time English…

  9. Review of "The Impact of a Universal Class-Size Reduction Policy: Evidence from Florida's Statewide Mandate"

    ERIC Educational Resources Information Center

    Finn, Jeremy D.

    2010-01-01

    In 2002, voters in Florida approved a constitutional amendment limiting class sizes in public schools to 18 students in the elementary grades, 22 students in middle grades, and 25 in high school grades. Analyzing statewide achievement data for school districts from 2004-2006 and for schools in 2007, this study purports to find that "mandated…

  10. Factors in the Determination of Cost Effective Class Sizes. Report No. 009-79.

    ERIC Educational Resources Information Center

    Woods, Nancy A.

    A system to determine cost effectiveness of class size should be based on both budgeted and actual expenditures and credit hours at the individual course section level. These two factors, in combination, are often expressed as cost per credit hour, and this statistic forms the primary means of evaluating planned "inputs" against actual "outputs."…

  11. Understanding the Effect of Response Rate and Class Size Interaction on Students Evaluation of Teaching in a Higher Education

    ERIC Educational Resources Information Center

    Al Kuwaiti, Ahmed; AlQuraan, Mahmoud; Subbarayalu, Arun Vijay

    2016-01-01

    Objective: This study aims to investigate the interaction between response rate and class size and its effects on students' evaluation of instructors and the courses offered at a higher education Institution in Saudi Arabia. Study Design: A retrospective study design was chosen. Methods: One thousand four hundred and forty four different courses…

  12. So How Big Is Big? Investigating the Impact of Class Size on Ratings in Student Evaluation

    ERIC Educational Resources Information Center

    Gannaway, Deanne; Green, Teegan; Mertova, Patricie

    2018-01-01

    Australian universities have a long history of use of student satisfaction surveys. Their use has expanded and purpose changed over time. The surveys are often viewed as distorted by external influences such as discipline context, class size and year level of participants. This paper reports on the results of a large-scale investigation…

  13. Scaling Up: Faculty Workload, Class Size, and Student Satisfaction in a Distance Learning Course on Geographic Information Science.

    ERIC Educational Resources Information Center

    Dibiase, David; Rademacher, Henry J.

    2005-01-01

    This article explores issues of scalability and sustainability in distance learning. The authors kept detailed records of time they spent teaching a course in geographic information science via the World Wide Web over a six-month period, during which class sizes averaged 49 students. The authors also surveyed students' satisfaction with the…

  14. The Impact of California's Class Size Reduction Initiative on Student Achievement: Detailed Findings from Eight School Districts.

    ERIC Educational Resources Information Center

    Mitchell, Douglas E.; Mitchell, Ross E.

    This report presents a comprehensive preliminary analysis of how California's Class Size Reduction (CSR) initiative has impacted student achievement during the first 2 years of implementation. The analysis is based on complete student, classroom, and teacher records from 26,126 students in 1,174 classrooms from 83 schools in 8 Southern California…

  15. Equivalence of truncated count mixture distributions and mixtures of truncated count distributions.

    PubMed

    Böhning, Dankmar; Kuhnert, Ronny

    2006-12-01

    This article is about modeling count data with zero truncation. A parametric count density family is considered. The truncated mixture of densities from this family is different from the mixture of truncated densities from the same family. Whereas the former model is more natural to formulate and to interpret, the latter model is theoretically easier to treat. It is shown that for any mixing distribution leading to a truncated mixture, a (usually different) mixing distribution can be found so that the associated mixture of truncated densities equals the truncated mixture, and vice versa. This implies that the likelihood surfaces for both situations agree, and in this sense both models are equivalent. Zero-truncated count data models are used frequently in the capture-recapture setting to estimate population size, and it can be shown that the two Horvitz-Thompson estimators, associated with the two models, agree. In particular, it is possible to achieve strong results for mixtures of truncated Poisson densities, including reliable, global construction of the unique NPMLE (nonparametric maximum likelihood estimator) of the mixing distribution, implying a unique estimator for the population size. The benefit of these results lies in the fact that it is valid to work with the mixture of truncated count densities, which is less appealing for the practitioner but theoretically easier. Mixtures of truncated count densities form a convex linear model, for which a developed theory exists, including global maximum likelihood theory as well as algorithmic approaches. Once the problem has been solved in this class, it might readily be transformed back to the original problem by means of an explicitly given mapping. Applications of these ideas are given, particularly in the case of the truncated Poisson family.

  16. Cube Kohonen self-organizing map (CKSOM) model with new equations in organizing unstructured data.

    PubMed

    Lim, Seng Poh; Haron, Habibollah

    2013-09-01

    Surface reconstruction by using 3-D data is used to represent the surface of an object and perform important tasks. The type of data used is important and can be described as either structured or unstructured. For unstructured data, there is no connectivity information between data points. As a result, incorrect shapes will be obtained during the imaging process. Therefore, the data should be reorganized by finding the correct topology so that the correct shape can be obtained. Previous studies have shown that the Kohonen self-organizing map (KSOM) could be used to solve data organizing problems. However, 2-D Kohonen maps are limited because they are unable to cover the whole surface of closed 3-D surface data. Furthermore, the neurons inside the 3-D KSOM structure should be removed in order to create a correct wireframe model. This is because only the outside neurons are used to represent the surface of an object. The aim of this paper is to use KSOM to organize unstructured data for closed surfaces. KSOM isused in this paper by testing its ability to organize medical image data because KSOM is mostly used in constructing engineering field data. Enhancements are added to the model by introducing class number and the index vector, and new equations are created. Various grid sizes and maximum iterations are tested in the experiments. Based on the results, the number of redundancies is found to be directly proportional to the grid size. When we increase the maximum iterations, the surface of the image becomes smoother. An area formula is used and manual calculations are performed to validate the results. This model is implemented and images are created using Dev C++ and GNUPlot.

  17. Unpredictability of soft tissue changes after camouflage treatment of Class II division 1 malocclusion with maximum anterior retraction using miniscrews.

    PubMed

    Kim, Kayoung; Choi, Sung-Hwan; Choi, Eun-Hee; Choi, Yoon-Jeong; Hwang, Chung-Ju; Cha, Jung-Yul

    2017-03-01

    To compare soft and hard tissue responses based on the degree of maxillary incisor retraction using maximum anchorage in patients with Class II division 1 malocclusion. This retrospective study sample was divided into moderate retraction (<8.0 mm; n = 28) and maximum retraction (≥8.0 mm; n = 29) groups based on the amount of maxillary incisor retraction after extraction of the maxillary and mandibular first premolars for camouflage treatment. Pre- and posttreatment lateral cephalograms were analyzed. There were 2.3 mm and 3.0 mm of upper and lower lip retraction, respectively, in the moderate group; and 4.0 mm and 5.3 mm, respectively, in the maximum group. In the moderate group, the upper lip was most influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.94). The lower lip was most influenced by posterior movement of B-point (β = 0.84) and the cervical point of the mandibular incisor (β = 0.83). Prediction was difficult in the maximum group; no variable showed a significant influence on upper lip changes. The lower lip was highly influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.50), but this correlation was weak in the maximum group. Posterior movement of the cervical point of the anterior teeth is necessary for increased lip retraction. However, periodic evaluation of the lip profile is needed during maximum retraction of the anterior teeth because of limitations in predicting soft tissue responses.

  18. Estimating accuracy of land-cover composition from two-stage cluster sampling

    USGS Publications Warehouse

    Stehman, S.V.; Wickham, J.D.; Fattorini, L.; Wade, T.D.; Baffetta, F.; Smith, J.H.

    2009-01-01

    Land-cover maps are often used to compute land-cover composition (i.e., the proportion or percent of area covered by each class), for each unit in a spatial partition of the region mapped. We derive design-based estimators of mean deviation (MD), mean absolute deviation (MAD), root mean square error (RMSE), and correlation (CORR) to quantify accuracy of land-cover composition for a general two-stage cluster sampling design, and for the special case of simple random sampling without replacement (SRSWOR) at each stage. The bias of the estimators for the two-stage SRSWOR design is evaluated via a simulation study. The estimators of RMSE and CORR have small bias except when sample size is small and the land-cover class is rare. The estimator of MAD is biased for both rare and common land-cover classes except when sample size is large. A general recommendation is that rare land-cover classes require large sample sizes to ensure that the accuracy estimators have small bias. ?? 2009 Elsevier Inc.

  19. Computational techniques for flows with finite-rate condensation

    NASA Technical Reports Server (NTRS)

    Candler, Graham V.

    1993-01-01

    A computational method to simulate the inviscid two-dimensional flow of a two-phase fluid was developed. This computational technique treats the gas phase and each of a prescribed number of particle sizes as separate fluids which are allowed to interact with one another. Thus, each particle-size class is allowed to move through the fluid at its own velocity at each point in the flow field. Mass, momentum, and energy are exchanged between each particle class and the gas phase. It is assumed that the particles do not collide with one another, so that there is no inter-particle exchange of momentum and energy. However, the particles are allowed to grow, and therefore, they may change from one size class to another. Appropriate rates of mass, momentum, and energy exchange between the gas and particle phases and between the different particle classes were developed. A numerical method was developed for use with this equation set. Several test cases were computed and show qualitative agreement with previous calculations.

  20. Latitudinal patterns in the life-history traits of three isolated Atlantic populations of the deep-water shrimp Plesionika edwardsii (Decapoda, Pandalidae)

    NASA Astrophysics Data System (ADS)

    González, José A.; Pajuelo, José G.; Triay-Portella, Raül; Ruiz-Díaz, Raquel; Delgado, João; Góis, Ana R.; Martins, Albertino

    2016-11-01

    Patterns in the life-history traits of the pandalid shrimp Plesionika edwardsii are studied for the first time in three isolated Atlantic populations (Madeira, Canaries and Cape Verde Islands) to gain an understanding of their latitudinal variations. The maximum carapace size of the populations studied, as well as the maximum weight, showed clear latitudinal patterns. The patterns observed may be a consequence of the temperature experienced by shrimps during development, 1.37 ° C higher in the Canaries and 5.96 ° C higher in the Cape Verde Islands than in Madeira. These temperature differences among populations may have induced phenotypic plasticity because the observed final body size decreased as the temperature increased. A latitudinal north-south pattern was also observed in the maximum size of ovigerous females, with larger sizes found in the Madeira area and lower sizes observed in the Cape Verde Islands. A similar pattern was observed in the brood size and maximum egg size. Females of P. edwardsii produced smaller eggs in the Cape Verde Islands than did those at the higher latitude in Madeira. P. edwardsii was larger at sexual maturity in Madeira than in the Cape Verde Islands. The relative size at sexual maturity is not affected by latitude or environmental factors and is the same in the three areas studied, varying slightly between 0.568 and 0.585. P. edwardsii had a long reproductive season with ovigerous females observed all year round, although latitudinal variations were observed. Seasonally, there were more ovigerous females in spring and summer in Madeira and from winter to summer in the Cape Verde Islands. P. edwardsii showed a latitudinal pattern in size, with asymptotic size and growth rate showing a latitudinal compensation gradient as a result of an increased growth performance in the Madeira population compared to that of the Cape Verde Islands.

  1. Maximum size-density relationships for mixed softwoods in the northeastern USA

    Treesearch

    Dale S. Solomon; Lianjun Zhang

    2002-01-01

    The maximum size-density relationships or self-thinning lines were developed for three mix .ed-softwood climax forest habitats (hemlock-red spruce, spruce-fir, and cedar-black spruce) in the northeastern USA. The plot data were collected from an extensive data base used in growth studies from 1950 to 1970, and represented a wide range of species compositions, sites,...

  2. Energetic constraints, size gradients, and size limits in benthic marine invertebrates.

    PubMed

    Sebens, Kenneth P

    2002-08-01

    Populations of marine benthic organisms occupy habitats with a range of physical and biological characteristics. In the intertidal zone, energetic costs increase with temperature and aerial exposure, and prey intake increases with immersion time, generating size gradients with small individuals often found at upper limits of distribution. Wave action can have similar effects, limiting feeding time or success, although certain species benefit from wave dislodgment of their prey; this also results in gradients of size and morphology. The difference between energy intake and metabolic (and/or behavioral) costs can be used to determine an energetic optimal size for individuals in such populations. Comparisons of the energetic optimal size to the maximum predicted size based on mechanical constraints, and the ensuing mortality schedule, provides a mechanism to study and explain organism size gradients in intertidal and subtidal habitats. For species where the energetic optimal size is well below the maximum size that could persist under a certain set of wave/flow conditions, it is probable that energetic constraints dominate. When the opposite is true, populations of small individuals can dominate habitats with strong dislodgment or damage probability. When the maximum size of individuals is far below either energetic optima or mechanical limits, other sources of mortality (e.g., predation) may favor energy allocation to early reproduction rather than to continued growth. Predictions based on optimal size models have been tested for a variety of intertidal and subtidal invertebrates including sea anemones, corals, and octocorals. This paper provides a review of the optimal size concept, and employs a combination of the optimal energetic size model and life history modeling approach to explore energy allocation to growth or reproduction as the optimal size is approached.

  3. 7 CFR 868.210 - Grades and grade requirements for the classes of Rough Rice. (See also § 868.212.)

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Rice. (See also § 868.212.) 868.210 Section 868.210 Agriculture Regulations of the Department of... United States Standards for Rough Rice Principles Governing Application of Standards § 868.210 Grades and grade requirements for the classes of Rough Rice. (See also § 868.212.) Grade Maximum limits of— Seeds...

  4. 7 CFR 868.210 - Grades and grade requirements for the classes of Rough Rice. (See also § 868.212.)

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Rice. (See also § 868.212.) 868.210 Section 868.210 Agriculture Regulations of the Department of... United States Standards for Rough Rice Principles Governing Application of Standards § 868.210 Grades and grade requirements for the classes of Rough Rice. (See also § 868.212.) Grade Maximum limits of— Seeds...

  5. 40 CFR 147.903 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.903 Section 147.903 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  6. 40 CFR 147.1653 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1653 Section 147.1653 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  7. 40 CFR 147.303 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.303 Section 147.303 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  8. 40 CFR 147.2153 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.2153 Section 147.2153 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  9. 40 CFR 147.103 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.103 Section 147.103 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  10. 40 CFR 147.903 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.903 Section 147.903 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  11. 40 CFR 147.303 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.303 Section 147.303 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  12. 40 CFR 147.253 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.253 Section 147.253 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  13. 40 CFR 147.1353 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1353 Section 147.1353 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  14. 40 CFR 147.1453 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1453 Section 147.1453 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  15. 40 CFR 147.1153 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1153 Section 147.1153 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  16. 40 CFR 147.1353 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1353 Section 147.1353 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  17. 40 CFR 147.253 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.253 Section 147.253 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  18. 40 CFR 147.103 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.103 Section 147.103 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  19. 40 CFR 147.1653 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1653 Section 147.1653 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

  20. 40 CFR 147.1153 - Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule. 147.1153 Section 147.1153 Protection of... recovery and hydrocarbon storage) and III wells authorized by rule. Maximum injection pressure. The owner...

Top