Evaluation of regulatory variation and theoretical health risk for pesticide maximum residue limits in food.

PubMed

Li, Zijian

2018-08-01

To evaluate whether pesticide maximum residue limits (MRLs) can protect public health, a deterministic dietary risk assessment of maximum pesticide legal exposure was conducted to convert global MRLs to theoretical maximum dose intake (TMDI) values by estimating the average food intake rate and human body weight for each country. A total of 114 nations (58% of the total nations in the world) and two international organizations, including the European Union (EU) and Codex (WHO) have regulated at least one of the most currently used pesticides in at least one of the most consumed agricultural commodities. In this study, 14 of the most commonly used pesticides and 12 of the most commonly consumed agricultural commodities were identified and selected for analysis. A health risk analysis indicated that nearly 30% of the computed pesticide TMDI values were greater than the acceptable daily intake (ADI) values; however, many nations lack common pesticide MRLs in many commonly consumed foods and other human exposure pathways, such as soil, water, and air were not considered. Normality tests of the TMDI values set indicated that all distributions had a right skewness due to large TMDI clusters at the low end of the distribution, which were caused by some strict pesticide MRLs regulated by the EU (normally a default MRL of 0.01 mg/kg when essential data are missing). The Box-Cox transformation and optimal lambda (λ) were applied to these TMDI distributions, and normality tests of the transformed data set indicated that the power transformed TMDI values of at least eight pesticides presented a normal distribution. It was concluded that unifying strict pesticide MRLs by nations worldwide could significantly skew the distribution of TMDI values to the right, lower the legal exposure to pesticide, and effectively control human health risks. Copyright © 2018 Elsevier Ltd. All rights reserved.

17 CFR Table III to Subpart E of... - Civil Monetary Penalty Inflation Adjustments

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Civil Monetary Penalty Inflation Adjustments III Table III to Subpart E of Part 201 Commodity and Securities Exchanges SECURITIES... pursuant to last adjustment Adjusted maximum penalty amount Securities and Exchange Commission 15 U.S.C...

17 CFR Table II to Subpart E of... - Civil Monetary Penalty Inflation Adjustments

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Civil Monetary Penalty Inflation Adjustments II Table II to Subpart E of Part 201 Commodity and Securities Exchanges SECURITIES AND... adjustment Adjusted maximum penalty amount Securities and Exchange Commission: 15 USC 77t(d) For natural...

17 CFR Table 1 to Subpart E of... - Civil Monetary Penalty Inflation Adjustments

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Civil Monetary Penalty Inflation Adjustments 1 Table 1 to Subpart E of Part 201 Commodity and Securities Exchanges SECURITIES AND... amount Adjusted maximum penalty amount SECURITIES AND EXCHANGE COMMISSION: 15 USC 77t(d) FOR NATURAL...

41 CFR 101-25.101-2 - Supply through storage and issue.

Code of Federal Regulations, 2013 CFR

2013-07-01

... dangerous commodities of high weight and density, or commodities highly susceptible to damage normally... close inspection or testing is necessary to secure quality, or where repetitive inspection and test of small lots are prohibitive from the standpoint of cost or potential urgency of need. (3) Where advance...

Flow studies for recycling metal commodities in the United States [Chapters A-M : gold, platinum, chromium, zinc, magnesium, lead, iron, manganese, columbium (niobium), tantalum, tin, molybdenum, and cobalt

USGS Publications Warehouse

Sibley, Scott F.

2004-01-01

USGS Circular 1196, 'Flow Studies for Recycling Metal Commodities in the United States,' presents the results of flow studies for recycling 26 metal commodities, from aluminum to zinc. These metals are a key component of the U.S. economy. Overall, recycling accounts for more than half of the U.S. metal supply by weight and roughly 40 percent by value.

22 CFR 211.9 - Liability for loss damage or improper distribution of commodities.

Code of Federal Regulations, 2012 CFR

2012-04-01

... specify how such losses occurred; (E) Obtain copies of port and/or ship records including scale weights... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Liability for loss damage or improper... § 211.9 Liability for loss damage or improper distribution of commodities. (Where the instructions in...

22 CFR 211.9 - Liability for loss damage or improper distribution of commodities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... specify how such losses occurred; (E) Obtain copies of port and/or ship records including scale weights... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Liability for loss damage or improper... § 211.9 Liability for loss damage or improper distribution of commodities. (Where the instructions in...

Effect of individual parameter changes on the outcome of the estimated short-term dietary exposure to pesticides.

PubMed

van der Velde-Koerts, Trijntje; Breysse, Nicolas; Pattingre, Lauriane; Hamey, Paul Y; Lutze, Jason; Mahieu, Karin; Margerison, Sam; Ossendorp, Bernadette C; Reich, Hermine; Rietveld, Anton; Sarda, Xavier; Vial, Gaelle; Sieke, Christian

2018-06-03

In 2015 a scientific workshop was held in Geneva, where updating the International Estimate of Short-Term Intake (IESTI) equations was suggested. This paper studies the effects of the proposed changes in residue inputs, large portions, variability factors and unit weights on the overall short-term dietary exposure estimate. Depending on the IESTI case equation, a median increase in estimated overall exposure by a factor of 1.0-6.8 was observed when the current IESTI equations are replaced by the proposed IESTI equations. The highest increase in the estimated exposure arises from the replacement of the median residue (STMR) by the maximum residue limit (MRL) for bulked and blended commodities (case 3 equations). The change in large portion parameter does not have a significant impact on the estimated exposure. The use of large portions derived from the general population covering all age groups and bodyweights should be avoided when large portions are not expressed on an individual bodyweight basis. Replacement of the highest residue (HR) by the MRL and removal of the unit weight each increase the estimated exposure for small-, medium- and large-sized commodities (case 1, case 2a or case 2b equations). However, within the EU framework lowering of the variability factor from 7 or 5 to 3 counterbalances the effect of changes in other parameters, resulting in an estimated overall exposure change for the EU situation of a factor of 0.87-1.7 and 0.6-1.4 for IESTI case 2a and case 2b equations, respectively.

Simple techniques for improving deep neural network outcomes on commodity hardware

NASA Astrophysics Data System (ADS)

Colina, Nicholas Christopher A.; Perez, Carlos E.; Paraan, Francis N. C.

2017-08-01

We benchmark improvements in the performance of deep neural networks (DNN) on the MNIST data test upon imple-menting two simple modifications to the algorithm that have little overhead computational cost. First is GPU parallelization on a commodity graphics card, and second is initializing the DNN with random orthogonal weight matrices prior to optimization. Eigenspectra analysis of the weight matrices reveal that the initially orthogonal matrices remain nearly orthogonal after training. The probability distributions from which these orthogonal matrices are drawn are also shown to significantly affect the performance of these deep neural networks.

Virtual Water Transfers in U.S. Cities from Domestic Commodity Flows

NASA Astrophysics Data System (ADS)

Ahams, I. C.; Mejia, A.; Paterson, W.

2015-12-01

Cities have imported water into their boundaries for centuries but understanding how cities indirectly affect watersheds through the commodities which they import is fairly unknown. Thus, we present and discuss here a methodology for determining the virtual water transfers to and from U.S. cities associated with domestic commodity flows. For our methodology, we only consider agricultural and industrial commodities and, to represent the commodity flows, we use the Freight Analysis Framework (FAF) dataset from the U.S. Department of Transportation. Accordingly, we determine virtual water transfers for the 123 geographic regions in the FAF, which consists of 17 states, 73 metropolitan statistical areas (MSAs), and 33 remainders of states. Out of the 41 sectors that comprise the FAF data, we consider only the 29 sectors that account for the agricultural and industrial commodities. Using both water use data for macro-sectors and national water use coefficients for different industries, we determine a weighted water use coefficient for each of the 29 sectors considered. Ultimately, we use these weighted coefficients to estimate virtual water transfers and the water footprint for each city. Preliminary comparisons with other water footprint estimates indicate that our methodology yields reasonable results. In terms of the water footprint, we find that cities (i.e. MSAs) are net consumers, can consume a large proportion of their own production, and can have a large agricultural production. We also find that the per capita water footprint of industrial consumption decreases with increasing population in cities, suggesting that large cities may be more efficient.

Health risk assessment of ochratoxin A for all age-sex strata in a market economy.

PubMed

Kuiper-Goodman, T; Hilts, C; Billiard, S M; Kiparissis, Y; Richard, I D K; Hayward, S

2010-02-01

In order to manage risk of ochratoxin A (OTA) in foods, we re-evaluated the tolerable daily intake (TDI), derived the negligible cancer risk intake (NCRI), and conducted a probabilistic risk assessment. A new approach was developed to derive 'usual' probabilistic exposure in the presence of highly variable occurrence data, such as encountered with low levels of OTA. Canadian occurrence data were used for various raw food commodities or finished foods and were combined with US Department of Agriculture (USDA) food consumption data, which included data on infants and young children. Both variability and uncertainty in input data were considered in the resulting exposure estimates for various age/sex strata. Most people were exposed to OTA on a daily basis. Mean adjusted exposures for all age-sex groups were generally below the NCRI of 4 ng OTA kg bw(-1), except for 1-4-year-olds as a result of their lower body weight. For children, the major contributors of OTA were wheat-based foods followed by oats, rice, and raisins. Beer, coffee, and wine also contributed to total OTA exposure in older individuals. Predicted exposure to OTA decreased when European Commission maximum limits were applied to the occurrence data. The impact on risk for regular eaters of specific commodities was also examined.

To impose a limitation on the maximum amount of crop insurance premiums paid by the Federal Crop Insurance Corporation, to repeal the authority to provide direct payments for producers of certain major agricultural commodities and peanuts, to prohibit the Secretary of Agriculture from making payments to the Brazilian Cotton Institute, and for other purposes.

THOMAS, 113th Congress

Rep. Kind, Ron [D-WI-3

2013-04-18

House - 05/03/2013 Referred to the Subcommittee on General Farm Commodities and Risk Management. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Fuel Cells and Other Emerging Manportable Power Technologies for the NATO Warfighter. Part 1: Power Sources for Manportable/Manwearable Applications (Piles a combustible et autres technologies portatives d’alimentation en energie pour les combattants de l’OTAN - Partie 1: Sources d’alimentation pour les applications transportables/portables par l’homme)

DTIC Science & Technology

2014-10-01

increases, the power source weight budget has to be traded against traditional soldier commodities such as ammunition, water and food . As the...When one considers the other commodities he is required to carry such as food , water, ammunition, etc., the weight burden will undoubtedly have a...Others have flexible outer packaging similar to that used in food processing, which are flexible. Flexible packages are emerging which enable the

Economics and Maximum Entropy Production

NASA Astrophysics Data System (ADS)

Lorenz, R. D.

2003-04-01

Price differentials, sales volume and profit can be seen as analogues of temperature difference, heat flow and work or entropy production in the climate system. One aspect in which economic systems exhibit more clarity than the climate is that the empirical and/or statistical mechanical tendency for systems to seek a maximum in production is very evident in economics, in that the profit motive is very clear. Noting the common link between 1/f noise, power laws and Self-Organized Criticality with Maximum Entropy Production, the power law fluctuations in security and commodity prices is not inconsistent with the analogy. There is an additional thermodynamic analogy, in that scarcity is valued. A commodity concentrated among a few traders is valued highly by the many who do not have it. The market therefore encourages via prices the spreading of those goods among a wider group, just as heat tends to diffuse, increasing entropy. I explore some empirical price-volume relationships of metals and meteorites in this context.

Characterization of the Virtual Water Commodity Network of Major U.S. Cities

NASA Astrophysics Data System (ADS)

Garcia, S.; Ahams, I. C.; Ruddell, B. L.; Mejia, A.

2016-12-01

Cities, through their socioeconomic power and consumption patterns, drive an intricate web of commodity flows that gives rise to an underlying network of indirect transfers of energy and water. The virtual water content of a commodity represents the water embedded in its production. It can serve as a measure of city water consumption that, along with direct, metabolic consumption, exposes the dependence of cities on distant regions and the potential vulnerabilities of the network to shocks and stresses. Using the U.S. network of commodities flows, together with their associated virtual water content, we use network theory to analyze first-order and higher-order topological properties of virtual water flows for major U.S. cities, defined by their metropolitan boundaries. They are represented as nodes and weighted directed links, symbolizing the volume and direction of the virtual water flows associated with the transfer of agricultural, livestock and industrial commodities. We find that network properties, generally, vary across commodities and reveal complex structures such as the appearance of hubs like Chicago, Houston, and New Orleans for industrial commodities and the formation of communities (megaregions). Additionally, using scaling arguments, we find that increasing city size makes larger cities more water efficient and hydroeconomically productive than smaller ones. This work represents an initial step towards understanding the role played by cities in the U.S. commodity network and food-energy-water (FEW) nexus.

Health risk assessment of ochratoxin A for all age-sex strata in a market economy

PubMed Central

Kuiper-Goodman, T.; Hilts, C.; Billiard, S.M.; Kiparissis, Y.; Richard, I.D.K.; Hayward, S.

2009-01-01

In order to manage risk of ochratoxin A (OTA) in foods, we re-evaluated the tolerable daily intake (TDI), derived the negligible cancer risk intake (NCRI), and conducted a probabilistic risk assessment. A new approach was developed to derive ‘usual’ probabilistic exposure in the presence of highly variable occurrence data, such as encountered with low levels of OTA. Canadian occurrence data were used for various raw food commodities or finished foods and were combined with US Department of Agriculture (USDA) food consumption data, which included data on infants and young children. Both variability and uncertainty in input data were considered in the resulting exposure estimates for various age/sex strata. Most people were exposed to OTA on a daily basis. Mean adjusted exposures for all age-sex groups were generally below the NCRI of 4ng OTA kg bw−1, except for 1–4-year-olds as a result of their lower body weight. For children, the major contributors of OTA were wheat-based foods followed by oats, rice, and raisins. Beer, coffee, and wine also contributed to total OTA exposure in older individuals. Predicted exposure to OTA decreased when European Commission maximum limits were applied to the occurrence data. The impact on risk for regular eaters of specific commodities was also examined. PMID:20013446

Economic aspects of virtual water trade

NASA Astrophysics Data System (ADS)

Oki, Taikan; Yano, Shinjiro; Hanasaki, Naota

2017-04-01

Although water is rarely traded over long distances by itself, the total weight of the water consumed to produce traded commodities exceeds the weight of any other commodity traded in the world. This concept is known as virtual water trade. Although space-/time-/commodity-based quantification has been conducted extensively, the underlying causes of this peculiar feature have thus far received little exploration. Here, we use estimates of water consumption from a global hydrological model and statistical data related to food trade to elucidate three facts that explain the fundamental nature of virtual water trade with respect to alleviating water scarcity. First, we quantitatively illustrate the unique position of water among commodities based on its unit price and quantity of sales. Water has an extremely low unit price, and a tremendous volume of water is consumed per person each day. Second, we show that rich but water-scarce countries tend to reduce local water consumption by importing virtual water. Third, we demonstrate that nations characterized by net virtual water exports have higher water resources and income per capita and that no countries fall below a certain threshold with respect to both GDP and water resources. These points suggest that the virtual water trade is explained by economic characteristics of water and that sustainable development depends on promoting the co-development of poverty alleviation and water resource development.

How water is different from energy and food?

NASA Astrophysics Data System (ADS)

Hanasaki, N.; Oki, T.; Yano, S.

2017-12-01

Although water is rarely traded over long distances by itself, the total weight of the water consumed to produce traded commodities exceeds the weight of any other commodity traded in the world. This concept is known as virtual water trade. Although space-/time-/commodity-based quantification has been conducted extensively, the underlying causes of this peculiar feature have thus far received little exploration. Here, we use estimates of water consumption from a global hydrological model and statistical data related to food trade to elucidate three facts that explain the fundamental nature of virtual water trade with respect to alleviating water scarcity. First, we quantitatively illustrate the unique position of water among commodities based on its unit price and quantity of sales. Water has an extremely low unit price, and a tremendous volume of water is consumed per person each day. Second, we show that rich but water-scarce countries tend to reduce local water consumption by importing virtual water. Third, we demonstrate that nations characterized by net virtual water exports have higher water resources and income per capita and that no countries fall below a certain threshold with respect to both GDP and water resources. These points suggest that the virtual water trade is explained by economic characteristics of water and that sustainable development depends on promoting the co-development of poverty alleviation and water resource development.

The substitutability of cigarettes and food: A behavioral economic comparison in normal weight and overweight or obese smokers.

PubMed

Murphy, Cara M; Owens, Max M; Sweet, Lawrence H; MacKillop, James

2016-12-01

Obesity and cigarette smoking contribute to a multitude of preventable deaths in the United States and eating and smoking behavior may influence each other. The field of behavioral economics integrates principles from psychology and economics and permits systematic examination of how commodities interrelate with one another. Using this framework, the current study evaluated the effects of rising food and cigarette prices on consumption to investigate their substitutability and their relationship to BMI and associated variables. Behavioral economics categorizes commodities as substitutable when the consumption of one increases as a function of a price increase in the other. Smokers (N = 86) completed a 2-part hypothetical task in which money was allocated to purchase cigarettes and fast-food-style reinforcers (e.g., hamburgers, ice cream) at various prices. Results indicated that food and cigarettes were not substitutes for one another (cross-price elasticity coefficients < .20). Food purchases were independent of cigarette price, whereas cigarette purchases decreased as food price rose. Cross-price elasticity coefficients were significantly associated with confidence in one's ability to control weight without smoking (rs = -.23 and .29), but not BMI (rs = .04 and .04) or postcessation weight concerns (rs = -.05 and .12). Perceived ability to manage weight without cigarettes may influence who substitutes food for cigarettes when quitting. In addition, given observed decreases in purchases of both commodities as food prices increased, these findings imply that greater taxation of fast-food-style reinforcers could potentially reduce consumption of these foods and also cigarettes among smokers. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

The Substitutability of Cigarettes and Food: A Behavioral Economic Comparison in Normal Weight and Overweight or Obese Smokers

PubMed Central

Murphy, Cara M.; Owens, Max M.; Sweet, Lawrence H.; MacKillop, James

2017-01-01

Obesity and cigarette smoking contribute to a multitude of preventable deaths in the US and eating and smoking behavior may influence each other. The field of behavioral economics integrates principles from psychology and economics and permits systematic examination of how commodities interrelate with one another. Using this framework, the current study evaluated the effects of rising food and cigarette prices on consumption to investigate their substitutability and their relationship to BMI and associated variables. Behavioral economics categorizes commodities as substitutable when the consumption of one increases as a function of a price increase in the other. Smokers (N = 86) completed a two-part hypothetical task in which money was allocated to purchase cigarettes and fast food-style reinforcers (e.g., hamburgers, ice cream) at various prices. Results indicated that food and cigarettes were not substitutes for one another (cross-price elasticity coefficients > .20). Food purchases were independent of cigarette price, whereas cigarette purchases decreased as food price rose. Cross-price elasticity coefficients were significantly associated with confidence in one’s ability to control weight without smoking (rs = −.23 and .29), but not BMI (rs = .04 and .04) or post-cessation weight concerns (rs = −.05 and .12). Perceived ability to manage weight without cigarettes may influence who substitutes food for cigarettes when quitting. In addition, given observed decreases in purchases of both commodities as food prices increased, these findings imply that greater taxation of fast food-style reinforcers could potentially reduce consumption of these foods and also cigarettes among smokers. PMID:27736143

Maximum Acceleration Recording Circuit

NASA Technical Reports Server (NTRS)

Bozeman, Richard J., Jr.

1995-01-01

Coarsely digitized maximum levels recorded in blown fuses. Circuit feeds power to accelerometer and makes nonvolatile record of maximum level to which output of accelerometer rises during measurement interval. In comparison with inertia-type single-preset-trip-point mechanical maximum-acceleration-recording devices, circuit weighs less, occupies less space, and records accelerations within narrower bands of uncertainty. In comparison with prior electronic data-acquisition systems designed for same purpose, circuit simpler, less bulky, consumes less power, costs and analysis of data recorded in magnetic or electronic memory devices. Circuit used, for example, to record accelerations to which commodities subjected during transportation on trucks.

Dietary exposure to acrylamide from potato crisps to the Spanish population.

PubMed

Arribas-Lorenzo, G; Morales, F J

2009-03-01

Potato crisps are one of the food commodities that contribute most to overall dietary human exposure of acrylamide. This investigation has estimated the dietary exposure to acrylamide form potato crisps in the Spanish population. Sampling of potato crisps (n = 36) from 16 different producers were carried out in March 2008. An average level of 740 microg kg(-1) (ranging from 81 to 2622 microg kg(-1); minimum to maximum) and a median of 592 microg kg(-1) were obtained. Acrylamide levels in marketed potato crisps have been significantly reduced (nearly to 50%) compared with a previous sampling performed 4 years earlier. The observed signal value (90th percentile) was 1377 microg kg(-1) with 86% of the samples with acrylamide levels lower than 1000 microg kg(-1). Dietary exposure to acrylamide from potato crisp consumption in the total Spanish population was estimated to be 0.042 microg kg(-1) body weight day(-1) by using a deterministic approach based on the National consumption database. In a second study, dietary exposure (based on a 3-day food record) was determined to be 0.053 microg kg(-1) body weight day(-1) for the adult population (17-60 years) and 0.142 microg kg(-1) body weight day(-1) for children (7-12 years). The contribution of potato crisps to the estimated dietary acrylamide exposure of the Spanish population is moderate as compared with other European Member States.

Evaluation of chlorpyrifos transferred from contaminated feed to duck commodities and dietary risks to Chinese consumers.

PubMed

Li, Rui; Ji, Xiaofeng; He, Liang; Liu, Zhiqiang; Wei, Wei; Qiang, Mingrong; Wang, Qiang; Yuan, Yuwei

2015-06-03

The present study describes chlorpyrifos residues in duck commodities through the duck food chain, transfer factors, and dietary risks to Chinese consumers. After duck feeding experiments with pellet feed that lasted for 42 days, chlorpyrifos residues found in all samples collected from the ducks on maximum estimated dose group (3.20 mg/kg level) were from <0.0005 to 0.019 mg/kg. The residue levels of the fat, intestine, and tongue were obviously higher than those of the meat and other edible tissues. The transfer factors of all duck commodities were from 0.0001 to 0.0049 among different contamination levels, which indicated that chlorpyrifos had a low persistency in duck meat and metabolism organs. The chronic exposure assessment revealed that only 0.034-0.150% of the acceptable daily intake (ADI; 0-0.01 mg/kg/bw/day) of chlorpyrifos was consumed via the duck commodities for different age and gender groups in China. The acute exposure assessments of different age and gender groups were only 0.019-0.082% of the acute reference dose (ARfD; 0-0.1 mg/kg/bw). The results show that the single dietary exposure risk of chlorpyrifos raised by the intake of duck commodities was quite low in China.

Random matrix theory filters and currency portfolio optimisation

NASA Astrophysics Data System (ADS)

Daly, J.; Crane, M.; Ruskin, H. J.

2010-04-01

Random matrix theory (RMT) filters have recently been shown to improve the optimisation of financial portfolios. This paper studies the effect of three RMT filters on realised portfolio risk, using bootstrap analysis and out-of-sample testing. We considered the case of a foreign exchange and commodity portfolio, weighted towards foreign exchange, and consisting of 39 assets. This was intended to test the limits of RMT filtering, which is more obviously applicable to portfolios with larger numbers of assets. We considered both equally and exponentially weighted covariance matrices, and observed that, despite the small number of assets involved, RMT filters reduced risk in a way that was consistent with a much larger S&P 500 portfolio. The exponential weightings indicated showed good consistency with the value suggested by Riskmetrics, in contrast to previous results involving stocks. This decay factor, along with the low number of past moves preferred in the filtered, equally weighted case, displayed a trend towards models which were reactive to recent market changes. On testing portfolios with fewer assets, RMT filtering provided less or no overall risk reduction. In particular, no long term out-of-sample risk reduction was observed for a portfolio consisting of 15 major currencies and commodities.

7 CFR 1207.506 - Policy.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN... in order to help maintain and expand existing domestic and foreign markets for potatoes and to... projects which will provide maximum benefit to the potato industry and no undue preference shall be given...

7 CFR 1207.506 - Policy.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN... in order to help maintain and expand existing domestic and foreign markets for potatoes and to... projects which will provide maximum benefit to the potato industry and no undue preference shall be given...

49 CFR 173.167 - Consumer commodities.

Code of Federal Regulations, 2013 CFR

2013-10-01

... exceed 30 kg (66 pounds) gross weight as prepared for shipment. (2) Closures. Friction-type closures must...) prescribed in § 173.27(c) of this part. The capability of a packaging to withstand an internal pressure...

77 FR 65100 - Adjustment of Civil Monetary Penalties for Inflation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-25

... Penalties for Inflation AGENCY: Commodity Futures Trading Commission ACTION: Final rule. SUMMARY: The... civil monetary penalties, to adjust for inflation. This rule sets forth the maximum, inflation-adjusted... Federal Civil Penalties Inflation Adjustment Act of 1990, as amended by the Debt Collection Improvement...

Short paths in expander graphs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kleinberg, J.; Rubinfeld, R.

Graph expansion has proved to be a powerful general tool for analyzing the behavior of routing algorithms and the interconnection networks on which they run. We develop new routing algorithms and structural results for bounded-degree expander graphs. Our results are unified by the fact that they are all based upon, and extend, a body of work asserting that expanders are rich in short, disjoint paths. In particular, our work has consequences for the disjoint paths problem, multicommodify flow, and graph minor containment. We show: (i) A greedy algorithm for approximating the maximum disjoint paths problem achieves a polylogarithmic approximation ratiomore » in bounded-degree expanders. Although our algorithm is both deterministic and on-line, its performance guarantee is an improvement over previous bounds in expanders. (ii) For a multicommodily flow problem with arbitrary demands on a bounded-degree expander, there is a (1 + {epsilon})-optimal solution using only flow paths of polylogarithmic length. It follows that the multicommodity flow algorithm of Awerbuch and Leighton runs in nearly linear time per commodity in expanders. Our analysis is based on establishing the following: given edge weights on an expander G, one can increase some of the weights very slightly so the resulting shortest-path metric is smooth - the min-weight path between any pair of nodes uses a polylogarithmic number of edges. (iii) Every bounded-degree expander on n nodes contains every graph with O(n/log{sup O(1)} n) nodes and edges as a minor.« less

77 FR 48899 - Flutriafol; Pesticide Tolerances for Emergency Exemptions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-15

... cotton, undelinted seed; cotton, meal; cotton, refined oil; and cotton gin byproducts. This action is in..., and Rodenticide Act (FIFRA) authorizing use of the pesticide on cotton. This regulation establishes a maximum permissible level for residues of flutriafol in or on cotton commodities. The time-limited...

7 CFR 1216.46 - Procedure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE PEANUT PROMOTION, RESEARCH, AND INFORMATION ORDER Peanut Promotion, Research, and Information Order National Peanut Board § 1216.46 Procedure... weighted by value of production as determined by a primary peanut-producing state's three-year running...

17 CFR 143.8 - Inflation-adjusted civil monetary penalties.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Inflation-adjusted civil... JURISDICTION General Provisions § 143.8 Inflation-adjusted civil monetary penalties. (a) Unless otherwise amended by an act of Congress, the inflation-adjusted maximum civil monetary penalty for each violation of...

NAFTA Guidance Document on Data Requirements for Tolerances on Imported Commodities in the United States and Canada

EPA Pesticide Factsheets

The purpose of this document is to provide detailed guidance on data requirements that meet the North American Free Trade Agreement standards for the establishment of pesticide import tolerances or maximum residue levels in Canada and the United States.

Real-Time GPS-Alternative Navigation Using Commodity Hardware

DTIC Science & Technology

2007-06-01

4.1 Test Plan and Setup ..............................................................................................84 4.1.1 Component and...improvements planned , the most influential for navigation are additional signals, frequencies, and improved signal strength. These improvements will... planned and implemented to provide maximum extensibility for additional sensors and functionality without disturbing the core GPU-accelerated

Ozone production by a dc corona discharge in air contaminated by n-heptane

NASA Astrophysics Data System (ADS)

Pekárek, S.

2008-01-01

Beneficial purposes of ozone such as elimination of odours, harmful bacteria and mildew can be used for transportation of food, fruits and vegetables with the aim to extend their storage life. To date the main technique used for this purpose in the transportation of these commodities, e.g. by trucks, was cooling. Here a combination of cooling together with the supply of ozone into containers with these commodities is considered. For these purposes we studied the effect of air contamination by n-heptane (part of automotive fuels) and humidity on ozone production by a dc hollow needle to mesh corona discharge. We found that, for both polarities of the needle electrode, addition of n-heptane to air (a) decreases ozone production; (b) causes discharge poisoning to occur at lower current than for air; (c) does not substantially influence the current for which the ozone production reaches the maximum. Finally the maximum ozone production for the discharge in air occurs for the same current as the maximum ozone production for the discharge contaminated by n-heptane. We also found that humidity decreases ozone production from air contaminated by n-heptane irrespective of the polarity of the coronating needle electrode. This dependence is stronger for the discharge with the needle biased positively.

Active Flexion in Weight Bearing Better Correlates with Functional Outcomes of Total Knee Arthroplasty than Passive Flexion.

PubMed

Song, Young Dong; Jain, Nimash; Kang, Yeon Gwi; Kim, Tae Yune; Kim, Tae Kyun

2016-06-01

Correlations between maximum flexion and functional outcomes in total knee arthroplasty (TKA) patients are reportedly weak. We investigated whether there are differences between passive maximum flexion in nonweight bearing and other types of maximum flexion and whether the type of maximum flexion correlates with functional outcomes. A total of 210 patients (359 knees) underwent preoperative evaluation and postoperative follow-up evaluations (6, 12, and 24 months) for the assessment of clinical outcomes including maximum knee flexion. Maximum flexion was measured under five conditions: passive nonweight bearing, passive weight bearing, active nonweight bearing, and active weight bearing with or without arm support. Data were analyzed for relationships between passive maximum flexion in nonweight bearing by Pearson correlation analyses, and a variance comparison between measurement techniques via paired t test. We observed substantial differences between passive maximum flexion in nonweight bearing and the other four maximum flexion types. At all time points, passive maximum flexion in nonweight bearing correlated poorly with active maximum flexion in weight bearing with or without arm support. Active maximum flexion in weight bearing better correlated with functional outcomes than the other maximum flexion types. Our study suggests active maximum flexion in weight bearing should be reported together with passive maximum flexion in nonweight bearing in research on the knee motion arc after TKA.

Active Flexion in Weight Bearing Better Correlates with Functional Outcomes of Total Knee Arthroplasty than Passive Flexion

PubMed Central

Song, Young Dong; Jain, Nimash; Kang, Yeon Gwi; Kim, Tae Yune

2016-01-01

Purpose Correlations between maximum flexion and functional outcomes in total knee arthroplasty (TKA) patients are reportedly weak. We investigated whether there are differences between passive maximum flexion in nonweight bearing and other types of maximum flexion and whether the type of maximum flexion correlates with functional outcomes. Materials and Methods A total of 210 patients (359 knees) underwent preoperative evaluation and postoperative follow-up evaluations (6, 12, and 24 months) for the assessment of clinical outcomes including maximum knee flexion. Maximum flexion was measured under five conditions: passive nonweight bearing, passive weight bearing, active nonweight bearing, and active weight bearing with or without arm support. Data were analyzed for relationships between passive maximum flexion in nonweight bearing by Pearson correlation analyses, and a variance comparison between measurement techniques via paired t test. Results We observed substantial differences between passive maximum flexion in nonweight bearing and the other four maximum flexion types. At all time points, passive maximum flexion in nonweight bearing correlated poorly with active maximum flexion in weight bearing with or without arm support. Active maximum flexion in weight bearing better correlated with functional outcomes than the other maximum flexion types. Conclusions Our study suggests active maximum flexion in weight bearing should be reported together with passive maximum flexion in nonweight bearing in research on the knee motion arc after TKA. PMID:27274468

40 CFR 180.101 - Specific tolerances; general provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances... per one million parts by weight of the raw agricultural commodity. (b) The poisonous and deleterious... used for determining whether pesticide residues, including negligible residues, in or on raw...

40 CFR 180.101 - Specific tolerances; general provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances... per one million parts by weight of the raw agricultural commodity. (b) The poisonous and deleterious... used for determining whether pesticide residues, including negligible residues, in or on raw...

National bicycling and walking study : 10 year status report

DOT National Transportation Integrated Search

1995-12-01

This case study examines trucking across the western U.S.-Canada border and how it is influenced by truck size and weight (TS&W) regulations. Western border trucking differs from eastern border trucking in terms of the types of commodities being hand...

7 CFR 1280.216 - Procedure for obtaining a refund.

Code of Federal Regulations, 2010 CFR

2010-01-01

... SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Expenses § 1280... collected applicant's assessment; (3) Number of head of lambs, weight of lambs, or its equivalent, on which...

Historical trends in U.S. mineral statistics for selected non-ferrous metals

USGS Publications Warehouse

Piper, David Z.; Nokleberg, Warren J.

2002-01-01

Production figures for selected nonferrous metals-aluminum (including bauxite and alumina), copper, lead, tin, titanium, and zinc-by the United States, as well as other statistics for these commodities, show strong volatility during 20th century. Major shifts were driven by the Great Depression and the two World Wars, but other major temporal changes are also noted that are not directly related to such global crises. For example, the price of tin exhibited a strong maximum in the 1980's, which is unrelated to world production, but rather to failed efforts of the International Tin Council to control price. In the case of copper, U.S. exports have varied throughout the second half of the century, by more than a factor of 5. Such volatility might be explained in part by global economic conditions, at least throughout recent decades. Supporting the interpretation of the importance of foreign pressure on the domestic commodities market is a close correlation between domestic consumption of antimony and its elevated price in the mid 1980's,possibly pushed up mostly by the world dominance in production of this commodity by China. However, only very superficial explanations can be advanced for such relations before we have examined, in concert, information for a much larger suite of commodities.

DEM interpolation weight calculation modulus based on maximum entropy

NASA Astrophysics Data System (ADS)

Chen, Tian-wei; Yang, Xia

2015-12-01

There is negative-weight in traditional interpolation of gridding DEM, in the article, the principle of Maximum Entropy is utilized to analyze the model system which depends on modulus of space weight. Negative-weight problem of the DEM interpolation is researched via building Maximum Entropy model, and adding nonnegative, first and second order's Moment constraints, the negative-weight problem is solved. The correctness and accuracy of the method was validated with genetic algorithm in matlab program. The method is compared with the method of Yang Chizhong interpolation and quadratic program. Comparison shows that the volume and scaling of Maximum Entropy's weight is fit to relations of space and the accuracy is superior to the latter two.

Meals Plus Program--An Innovative Approach for Providing Local Produce to Meals on Wheels Clients

ERIC Educational Resources Information Center

Wagner, Katie

2016-01-01

Extension programming often strives to achieve maximum impact on a minimum budget, but when it comes to sourcing local produce, asking farmers to donate sellable commodity can result in a dip into their profits. By connecting community partners, Extension can facilitate collaborations that work in the favor of all participating parties and…

High strength ferritic alloy

DOEpatents

Hagel, William C.; Smidt, Frederick A.; Korenko, Michael K.

1977-01-01

A high-strength ferritic alloy useful for fast reactor duct and cladding applications where an iron base contains from about 9% to about 13% by weight chromium, from about 4% to about 8% by weight molybdenum, from about 0.2% to about 0.8% by weight niobium, from about 0.1% to about 0.3% by weight vanadium, from about 0.2% to about 0.8% by weight silicon, from about 0.2% to about 0.8% by weight manganese, a maximum of about 0.05% by weight nitrogen, a maximum of about 0.02% by weight sulfur, a maximum of about 0.02% by weight phosphorous, and from about 0.04% to about 0.12% by weight carbon.

7 CFR 1421.102 - Adjustment of basic loan rates.

Code of Federal Regulations, 2012 CFR

2012-01-01

...-MARKETING ASSISTANCE LOANS AND LOAN DEFICIENCY PAYMENTS FOR 2008 THROUGH 2012 Marketing Assistance Loans... county marketing assistance loan rate. (2) For farm-stored commodities where the test weight discounts... schedule of discounts, the marketing assistance loan rate shall be reduced to 20 percent of the county loan...

7 CFR 1421.102 - Adjustment of basic loan rates.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-MARKETING ASSISTANCE LOANS AND LOAN DEFICIENCY PAYMENTS FOR 2008 THROUGH 2012 Marketing Assistance Loans... county marketing assistance loan rate. (2) For farm-stored commodities where the test weight discounts... schedule of discounts, the marketing assistance loan rate shall be reduced to 20 percent of the county loan...

7 CFR 1421.102 - Adjustment of basic loan rates.

Code of Federal Regulations, 2013 CFR

2013-01-01

...-MARKETING ASSISTANCE LOANS AND LOAN DEFICIENCY PAYMENTS FOR 2008 THROUGH 2012 Marketing Assistance Loans... county marketing assistance loan rate. (2) For farm-stored commodities where the test weight discounts... schedule of discounts, the marketing assistance loan rate shall be reduced to 20 percent of the county loan...

Evaluating the effects of heavy sugar cane truck operations on repair cost of low volume highways : technical summary report.

DOT National Transportation Integrated Search

2008-10-01

Current Louisiana state laws allow truck operators hauling certain agricultural commodities to purchase : overweight permits and haul at gross vehicle weights (GVW) in excess of the legislated GVW limit of : 80,000 lb. For instance, sugar cane trucke...

Evaluating the Effects of Heavy Sugar Cane Truck Operations on Repair Cost of Low Volume Highways : Technical Summary Report

DOT National Transportation Integrated Search

2008-10-01

Current Louisiana state laws allow truck operators hauling certain agricultural commodities to purchase overweight permits and haul at gross vehicle weights (GVW) in excess of the legislated GVW limit of 80,000 lb. For instance, sugar cane truckers m...

15 CFR 30.3 - Electronic Export Information filer requirements, parties to export transactions, and...

Code of Federal Regulations, 2013 CFR

2013-01-01

.../units of measure. (ix) Value. (x) Export Control Classification Number (ECCN) or sufficient technical information to determine the ECCN. (xi) All licensing information necessary to file the EEI for commodities... export. (xi) Foreign port of unloading. (xii) Shipping weight. (xiii) ECCN. (xiv) License or license...

15 CFR 30.3 - Electronic Export Information filer requirements, parties to export transactions, and...

Code of Federal Regulations, 2010 CFR

2010-01-01

.../units of measure. (ix) Value. (x) Export Control Classification Number (ECCN) or sufficient technical information to determine the ECCN. (xi) All licensing information necessary to file the EEI for commodities... export. (xi) Foreign port of unloading. (xii) Shipping weight. (xiii) ECCN. (xiv) License or license...

15 CFR 30.3 - Electronic Export Information filer requirements, parties to export transactions, and...

Code of Federal Regulations, 2012 CFR

2012-01-01

.../units of measure. (ix) Value. (x) Export Control Classification Number (ECCN) or sufficient technical information to determine the ECCN. (xi) All licensing information necessary to file the EEI for commodities... export. (xi) Foreign port of unloading. (xii) Shipping weight. (xiii) ECCN. (xiv) License or license...

15 CFR 30.3 - Electronic Export Information filer requirements, parties to export transactions, and...

Code of Federal Regulations, 2014 CFR

2014-01-01

.../units of measure. (ix) Value. (x) Export Control Classification Number (ECCN) or sufficient technical information to determine the ECCN. (xi) All licensing information necessary to file the EEI for commodities... export. (xi) Foreign port of unloading. (xii) Shipping weight. (xiii) ECCN. (xiv) License or license...

15 CFR 30.3 - Electronic Export Information filer requirements, parties to export transactions, and...

Code of Federal Regulations, 2011 CFR

2011-01-01

.../units of measure. (ix) Value. (x) Export Control Classification Number (ECCN) or sufficient technical information to determine the ECCN. (xi) All licensing information necessary to file the EEI for commodities... export. (xi) Foreign port of unloading. (xii) Shipping weight. (xiii) ECCN. (xiv) License or license...

7 CFR 1421.102 - Adjustment of basic loan rates.

Code of Federal Regulations, 2010 CFR

2010-01-01

...-MARKETING ASSISTANCE LOANS AND LOAN DEFICIENCY PAYMENTS FOR 2008 THROUGH 2012 Marketing Assistance Loans... county marketing assistance loan rate. (2) For farm-stored commodities where the test weight discounts... schedule of discounts, the marketing assistance loan rate shall be reduced to 20 percent of the county loan...

What's holding us back? Raising the alfalfa yield bar

USDA-ARS?s Scientific Manuscript database

Measuring yield of commodity crops is easy – weight and moisture content are determined on delivery. Consequently, reports of production or yield for grain crops can be made reliably to the agencies that track crop production, such as the USDA-National Agricultural Statistics Service (NASS). The s...

High strength ferritic alloy-D53

DOEpatents

Hagel, William C.; Smidt, Frederick A.; Korenko, Michael K.

1977-01-01

A high strength ferritic alloy is described having from about 0.2% to about 0.8% by weight nickel, from about 2.5% to about 3.6% by weight chromium, from about 2.5% to about 3.5% by weight molybdenum, from about 0.1% to about 0.5% by weight vanadium, from about 0.1% to about 0.5% by weight silicon, from about 0.1% to about 0.6% by weight manganese, from about 0.12% to about 0.20% by weight carbon, from about 0.02% to about 0.1% by weight boron, a maximum of about 0.05% by weight nitrogen, a maximum of about 0.02% by weight phosphorous, a maximum of about 0.02% by weight sulfur, and the balance iron.

33 CFR 401.4 - Maximum length and weight.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Maximum length and weight. 401.4 Section 401.4 Navigation and Navigable Waters SAINT LAWRENCE SEAWAY DEVELOPMENT CORPORATION, DEPARTMENT OF TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Condition of Vessels § 401.4 Maximum length and weight...

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and inboard-outdrive boats. 183.33 Section 183.33 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.33 Maximum weight capacity: Inboard and inboard-outdrive boats. (a) The maximum weight capacity (W...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2012 CFR

2012-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and inboard-outdrive boats. 183.33 Section 183.33 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.33 Maximum weight capacity: Inboard and inboard-outdrive boats. (a) The maximum weight capacity (W...

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and inboard-outdrive boats. 183.33 Section 183.33 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.33 Maximum weight capacity: Inboard and inboard-outdrive boats. (a) The maximum weight capacity (W...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2014 CFR

2014-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2011 CFR

2011-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2010 CFR

2010-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and inboard-outdrive boats. 183.33 Section 183.33 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.33 Maximum weight capacity: Inboard and inboard-outdrive boats. (a) The maximum weight capacity (W...

33 CFR 183.35 - Maximum weight capacity: Outboard boats.

Code of Federal Regulations, 2013 CFR

2013-07-01

... boats. 183.35 Section 183.35 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Safe Loading § 183.35 Maximum weight capacity: Outboard boats. (a) The maximum weight capacity marked on a boat that is designed or intended to...

Manufacturing process design for multi commodities in agriculture

NASA Astrophysics Data System (ADS)

Prasetyawan, Yudha; Santosa, Andrian Henry

2017-06-01

High-potential commodities within particular agricultural sectors should be accompanied by maximum benefit value that can be attained by both local farmers and business players. In several cases, the business players are small-medium enterprises (SMEs) which have limited resources to perform added value process of the local commodities into the potential products. The weaknesses of SMEs such as the manual production process with low productivity, limited capacity to maintain prices, and unattractive packaging due to conventional production. Agricultural commodity is commonly created into several products such as flour, chips, crackers, oil, juice, and other products. This research was initiated by collecting data by interview method particularly to obtain the perspectives of SMEs as the business players. Subsequently, the information was processed based on the Quality Function Deployment (QFD) to determine House of Quality from the first to fourth level. A proposed design as the result of QFD was produced and evaluated with Technology Assessment Model (TAM) and continued with a revised design. Finally, the revised design was analyzed with financial perspective to obtain the cost structure of investment, operational, maintenance, and workers. The machine that performs manufacturing process, as the result of revised design, was prototyped and tested to determined initial production process. The designed manufacturing process offers IDR 337,897, 651 of Net Present Value (NPV) in comparison with the existing process value of IDR 9,491,522 based on similar production input.

Context Aware Routing Management Architecture for Airborne Networks

DTIC Science & Technology

2012-03-22

awareness, increased survivability, 2 higher operation tempo , greater lethality, improve speed of command and certain degree of self-synchronization [35...first two sets of experiments. This error model simulates deviations from predetermined routes as well as variations on signal strength for radio...routes computed using Maximum Concurrent Multi-Commodity flow algorithm are not susceptible to rapid topology variations induced by noise. 57 5

Report of the 64th National Conference on Weights and Measures

NASA Astrophysics Data System (ADS)

Wollin, H. F.; Babeoq, L. E.; Heffernan, A. P.

1980-03-01

Major issues discussed at this conference include metric conversion in the United States, particularly the conversion of gasoline dispensers, problems relating to the quantity fill of packaged commodities especially as affected by moisture loss and statistical approach to package checking. Federal grain inspection, and a legal metrology control system are also discussed.

Alternative Fuels Data Center

Science.gov Websites

Natural Gas Vehicle (NGV) Weight Exemption NGVs may exceed the federal maximum gross vehicle weight the weight of a comparable diesel tank and fueling system. The NGV must not exceed a maximum gross

Alternative Fuels Data Center

Science.gov Websites

Natural Gas Vehicle (NGV) Weight Exemption NGVs may exceed the maximum gross vehicle weight limit exceed a maximum gross vehicle weight of 82,000 pounds. (Reference Senate Bill 1102, 2017, and Texas

2007 Joint Service Power Expo Held in San Diego, California on April 24-26, 2007. Volume 4: Thursday Presentations

DTIC Science & Technology

2007-04-26

Marc Gietter (#4929) Fuel reduction solutions for deployment of mobile electric power systems - Oerlikon Contraves , Philippe Bisaillon Eng. MEM...9,675 Whr/kg Global Commodity 8 e50 • 50 Watt Continuous Power • 12V • 100 Watt peak power • System Specifications • Dry system weight , less than 2.25...System Dry Weight 2.25kg Volume 4.5 Net System Efficiency 17% Specifications Specific Energy 3 Day Mission W-hr/kg 775 10 Day Mission W-hr/kg 1200 Goal

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

29 CFR 1918.85 - Containerized cargo operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Containerized cargo operations. (a) Container markings. Every intermodal container shall be legibly and permanently marked with: (1) The weight of the container when empty, in pounds; (2) The maximum cargo weight... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting...

23 CFR 658.17 - Weight.

Code of Federal Regulations, 2010 CFR

2010-04-01

... maximum gross vehicle weight shall be 80,000 pounds except where lower gross vehicle weight is dictated by... of axles, or a vehicle is 20,000 pounds. (d) The maximum gross weight on tandem axles is 34,000... first and last axle is 36 feet or more. In no case shall the total gross weight of a vehicle exceed 80...

22 CFR 211.9 - Liability for loss damage or improper distribution of commodities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... cargo; (B) Report on discharging method (including whether a scale was used, its type and calibration and other factors affecting its accuracy, or an explanation of why a scale was not used and how weight... customs; (D) Provide actual or estimated (if scales not used) quantity of cargo lost during discharge and...

48 CFR 752.247-70 - Preference for privately owned U.S.-flag commercial vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., depending on current compliance with Cargo Preference requirements. If freight under the contract is fixed... commodity. (viii) Gross weight in pounds and cubic feet if available. (ix) Total ocean freight revenue in U.S. dollars. Alternate I (d) If freight is fixed on a U.S. flag vessel, except as provided in...

48 CFR 752.247-70 - Preference for privately owned U.S.-flag commercial vessels.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., depending on current compliance with Cargo Preference requirements. If freight under the contract is fixed... commodity. (viii) Gross weight in pounds and cubic feet if available. (ix) Total ocean freight revenue in U.S. dollars. Alternate I (d) If freight is fixed on a U.S. flag vessel, except as provided in...

48 CFR 752.247-70 - Preference for privately owned U.S.-flag commercial vessels.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., depending on current compliance with Cargo Preference requirements. If freight under the contract is fixed... commodity. (viii) Gross weight in pounds and cubic feet if available. (ix) Total ocean freight revenue in U.S. dollars. Alternate I (d) If freight is fixed on a U.S. flag vessel, except as provided in...

48 CFR 52.247-64 - Preference for Privately Owned U.S.-Flag Commercial Vessels.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ship at least 50 percent of the gross tonnage involved under this contract (computed separately for dry... of commodity. (H) Gross weight in pounds and cubic feet if available. (I) Total ocean freight revenue...) Shipped in direct support of U.S. military— (1) Contingency operations; (2) Exercises; or (3) Forces...

48 CFR 752.247-70 - Preference for privately owned U.S.-flag commercial vessels.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., depending on current compliance with Cargo Preference requirements. If freight under the contract is fixed... commodity. (viii) Gross weight in pounds and cubic feet if available. (ix) Total ocean freight revenue in U.S. dollars. Alternate I (d) If freight is fixed on a U.S. flag vessel, except as provided in...

48 CFR 52.247-64 - Preference for Privately Owned U.S.-Flag Commercial Vessels.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ship at least 50 percent of the gross tonnage involved under this contract (computed separately for dry... of commodity. (H) Gross weight in pounds and cubic feet if available. (I) Total ocean freight revenue...) Shipped in direct support of U.S. military— (1) Contingency operations; (2) Exercises; or (3) Forces...

48 CFR 52.247-64 - Preference for Privately Owned U.S.-Flag Commercial Vessels.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ship at least 50 percent of the gross tonnage involved under this contract (computed separately for dry... of commodity. (H) Gross weight in pounds and cubic feet if available. (I) Total ocean freight revenue...) Shipped in direct support of U.S. military— (1) Contingency operations; (2) Exercises; or (3) Forces...

41 CFR 102-117.345 - Is there a requirement for me to report to GSA on my transportation activities?

Code of Federal Regulations, 2014 CFR

2014-01-01

... an electronic formatted report on the quantity shipped, locations (from and to) and cost of... weight shipped; (3) Commodities shipped; (4) HAZMAT shipped; (5) Mode used for shipment; (6) Location of items shipped (international or domestic); and (7) Domestic subdivided by East and West (Interstate 85...

41 CFR 102-117.345 - Is there a requirement for me to report to GSA on my transportation activities?

Code of Federal Regulations, 2011 CFR

2011-01-01

... an electronic formatted report on the quantity shipped, locations (from and to) and cost of... weight shipped; (3) Commodities shipped; (4) HAZMAT shipped; (5) Mode used for shipment; (6) Location of items shipped (international or domestic); and (7) Domestic subdivided by East and West (Interstate 85...

41 CFR 102-117.345 - Is there a requirement for me to report to GSA on my transportation activities?

Code of Federal Regulations, 2013 CFR

2013-07-01

... an electronic formatted report on the quantity shipped, locations (from and to) and cost of... weight shipped; (3) Commodities shipped; (4) HAZMAT shipped; (5) Mode used for shipment; (6) Location of items shipped (international or domestic); and (7) Domestic subdivided by East and West (Interstate 85...

41 CFR 102-117.345 - Is there a requirement for me to report to GSA on my transportation activities?

Code of Federal Regulations, 2012 CFR

2012-01-01

... an electronic formatted report on the quantity shipped, locations (from and to) and cost of... weight shipped; (3) Commodities shipped; (4) HAZMAT shipped; (5) Mode used for shipment; (6) Location of items shipped (international or domestic); and (7) Domestic subdivided by East and West (Interstate 85...

41 CFR 102-117.345 - Is there a requirement for me to report to GSA on my transportation activities?

Code of Federal Regulations, 2010 CFR

2010-07-01

... include an electronic formatted report on the quantity shipped, locations (from and to) and cost of... weight shipped; (3) Commodities shipped; (4) HAZMAT shipped; (5) Mode used for shipment; (6) Location of items shipped (international or domestic); and (7) Domestic subdivided by East and West (Interstate 85). ...

Economic modeling of the rational consumption of addictive substances.

PubMed

Ferguson, Brian S

2006-01-01

This article gives an overview of the way economists model the decision to consume addictive commodities and reviews some of the relevant literature testing aspects of the model. It aims to answer the question of how it is that economists can speak of the consumption of addictive harmful commodities as a rational decision. Health economics treats the consumption of commodities that have beneficial (or harmful) effects on health, and therefore on utility or well-being, as intertemporal decisions with regard to investment decisions. In investment in health, the payoff to an action comes appreciably later than the action itself. The decision to consume harmful, and even addictive, commodities fits into the investment in health framework, with the benefit comes now, in the form of the pleasure derived from consuming them, and the costs, in terms of damage to the individual's health, comes later. The value that a person places on the future vs. the present is called time preference or subjective rate of time discounting, which represents the weight he places on the future relative to the present when he makes decisions that have future consequences. The more they discount the future, the more myopic they are and the more likely to undertake risky behaviors, including smoking or using drugs such as amphetamines or heroin, as well as dropping out of school or taking on high risk jobs.

Preserving Perishables (Dormavac)

NASA Technical Reports Server (NTRS)

1979-01-01

A new commercial product that can preserve perishable commodities for weeks without freezing, so that they can be shipped fresh without the cost of air freight, has been developed by Grumman Corporation, Bethpage, Long Island, New York. The development benefited from the company's experience in developing the environmental control system for the Lunar Module, which delivered Apollo astronauts to the surface of the moon. Called Dormavac, the system provides a commodity-preserving environment within an aluminum container that can be transported by truck, rail or ship. Dormavac creates a cold-but above freezing-environment with high relative humidity and very low air pressure. The saturated air minimizes commodity weight loss and the air is automatically changed several times an hour to flush away odors and harmful gases released by the commodities. According to company literature, Dormavac significantly extends the transportation life of perishables. For example, pork has a normal cold storage life of about seven days, beef two weeks and tomatoes three weeks; with Dormavac, pork remains fresh for three weeks, beef more than six weeks and tomatoes seven weeks or more. Dormavac is manufactured and marketed by Grumman Allied Industries, Woodbury, New York. In developing the system, Grumman Allied drew upon the technological resources of another company subsidiary, Grumman Aerospace. Engineers who had earlier worked on Lunar Module environmental control brought their know-how and experience to the Dormavac development.

A distributed-memory approximation algorithm for maximum weight perfect bipartite matching

DOE Office of Scientific and Technical Information (OSTI.GOV)

Azad, Ariful; Buluc, Aydin; Li, Xiaoye S.

We design and implement an efficient parallel approximation algorithm for the problem of maximum weight perfect matching in bipartite graphs, i.e. the problem of finding a set of non-adjacent edges that covers all vertices and has maximum weight. This problem differs from the maximum weight matching problem, for which scalable approximation algorithms are known. It is primarily motivated by finding good pivots in scalable sparse direct solvers before factorization where sequential implementations of maximum weight perfect matching algorithms, such as those available in MC64, are widely used due to the lack of scalable alternatives. To overcome this limitation, we proposemore » a fully parallel distributed memory algorithm that first generates a perfect matching and then searches for weightaugmenting cycles of length four in parallel and iteratively augments the matching with a vertex disjoint set of such cycles. For most practical problems the weights of the perfect matchings generated by our algorithm are very close to the optimum. An efficient implementation of the algorithm scales up to 256 nodes (17,408 cores) on a Cray XC40 supercomputer and can solve instances that are too large to be handled by a single node using the sequential algorithm.« less

Reconceptualizing the Association between Food Insufficiency and Body Weight: Distinguishing Hunger from Economic Hardship

PubMed Central

Ross, Catherine E.; Hill, Terrence D.

2013-01-01

What is the association between food insufficiency and body weight? Although common sense would suggest a negative association, research often finds the opposite. We contrast commodity theories of material privation with stress theories, proposing that the seemingly counterintuitive association results from the confounding influence of economic hardship. Because it is a chronic stressor, economic hardship may contribute to overweight. Data from the WCF project of 2,402 disadvantaged women in Chicago, Boston, and San Antonio show that people who experience economic hardship weigh more; and that the true negative association between body weight and food insufficiency—especially going hungry because one cannot afford food—is revealed only after adjustment for economic hardship. PMID:24244066

Three-dimensional motion analysis of the lumbar spine during "free squat" weight lift training.

PubMed

Walsh, James C; Quinlan, John F; Stapleton, Robert; FitzPatrick, David P; McCormack, Damian

2007-06-01

Heavy weight lifting using a squat bar is a commonly used athletic training exercise. Previous in vivo motion studies have concentrated on lifting of everyday objects and not on the vastly increased loads that athletes subject themselves to when performing this exercise. Athletes significantly alter their lumbar spinal motion when performing squat lifting at heavy weights. Controlled laboratory study. Forty-eight athletes (28 men, 20 women) performed 6 lifts at 40% maximum, 4 lifts at 60% maximum, and 2 lifts at 80% maximum. The Zebris 3D motion analysis system was used to measure lumbar spine motion. Exercise was performed as a "free" squat and repeated with a weight lifting support belt. Data obtained were analyzed using SAS. A significant decrease (P < .05) was seen in flexion in all groups studied when lifting at 40% maximum compared with lifting at 60% and 80% of maximum lift. Flexion from calibrated 0 point ranged from 24.7 degrees (40% group) to 6.8 degrees (80% group). A significant increase (P < .05) was seen in extension when lifting at 40% maximum was compared with lifting at 60% and 80% maximum lift. Extension from calibrated 0 point ranged from -1.5 degrees (40% group) to -20.3 degrees (80% group). No statistically significant difference was found between motion seen when exercise was performed as a free squat or when lifting using a support belt in any of the groups studied. Weight lifting using a squat bar causes athletes to significantly hyperextend their lumbar spines at heavier weights. The use of a weight lifting support belt does not significantly alter spinal motion during lifting.

49 CFR 173.417 - Authorized fissile materials packages.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for export and import shipments. (2) A residual “heel” of enriched solid uranium hexafluoride may be... “Heel” in a Specification 7A Cylinder) Maximum cylinder diameter Centimeters Inches Cylinder volume Liters Cubic feet Maximum Uranium 235-enrichment (weight)percent Maximum “Heel” weight per cylinder UF6...

49 CFR 173.417 - Authorized fissile materials packages.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for export and import shipments. (2) A residual “heel” of enriched solid uranium hexafluoride may be... “Heel” in a Specification 7A Cylinder) Maximum cylinder diameter Centimeters Inches Cylinder volume Liters Cubic feet Maximum Uranium 235-enrichment (weight)percent Maximum “Heel” weight per cylinder UF6...

[Rationality of commodity criteria and traditional breeding of Polygala tenuifolia based on agronomic traits and determination of chemical components].

PubMed

Wang, Dan-Dan; Bai, Lu; Xu, Xiao-Shuang; Zhang, Fu-Sheng; Xing, Jie; Jia, Jin-Ping; Tian, Hong-Ling; Qin, Xue-Mei

2016-10-01

The agronomic traits (plant height, root diameter, root length, first lateral root height, lateral root amount, root weight) of 18 Polygala tenuifolia samples with different agronomic traits were analyzed, respectively. HPLC was used to analyze three main characteristic components including tenuifolin, polygalaxanthone Ⅲ, and 3,6'-disinapoyl sucrose. At last, the correlation between six agronomic traits and three main characteristic components were analyzed by scatter plot. We found no significant correlation between root diameter and three main characteristic components. There were no obvious correlations between tenuifolin and the remaining five agronomic traits. Short root length and first lateral root height as well as high lateral root amount resulted in high levels of polygalaxanthone Ⅲ in P. tenuifolia samples. High levels of 3,6'-disinapoyl sucrose were observed in P. tenuifolia samples with longer root. So, the current commodity criteria and traditional breeding of P. tenuifolia did not conform to pharmacopoeia standards, which excellent medicinal materials should have high contents of the main characteristic components. It was urgent to revise the current commodity criteria and breeding methods. Copyright© by the Chinese Pharmaceutical Association.

Item Selection and Ability Estimation Procedures for a Mixed-Format Adaptive Test

ERIC Educational Resources Information Center

Ho, Tsung-Han; Dodd, Barbara G.

2012-01-01

In this study we compared five item selection procedures using three ability estimation methods in the context of a mixed-format adaptive test based on the generalized partial credit model. The item selection procedures used were maximum posterior weighted information, maximum expected information, maximum posterior weighted Kullback-Leibler…

Metacomputing on Commodity Computers

DTIC Science & Technology

1999-05-01

on NOWs, and this has contributed to the popularity of systems such as PVM [59], MPI [67], Linda [33], and TreadMarks [2]. 26 Challenges Given that...presents the performance of Calypso and Persistent Linda (PLinda) [77] programs and compares how they can tolerate failures. A biological pattern...adds fault tolerance to Linda programs by using light-weight transac- tions, whereas Calypso uses the combination of eager scheduling and two-phase

75 FR 71550 - N,N,N′,N″,-Tetrakis-(2-Hydroxypropyl) Ethylenediamine (NTHE); Exemption From the Requirement of a...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... study in rats (1956), where the NOAEL was set at 600-900 mg/kg/day (1% in diet), based on body-weight gain effects at 3% and 5% in the diet and a slightly greater incidence of borderline abnormalities of... applied to growing crops and raw agricultural commodities. That limitation will be enforced through the...

Malaria rapid diagnostic test transport and storage conditions in Burkina Faso, Senegal, Ethiopia and the Philippines

PubMed Central

2012-01-01

Background As more point of care diagnostics become available, the need to transport and store perishable medical commodities to remote locations increases. As with other diagnostics, malaria rapid diagnostic tests (RDTs) must be highly reliable at point of use, but exposure to adverse environmental conditions during distribution has the potential to degrade tests and accuracy. In remote locations, poor quality diagnostics and drugs may have significant negative health impact that is not readily detectable by routine monitoring. This study assessed temperature and humidity throughout supply chains used to transport and store health commodities, such as RDTs. Methods Monitoring devices capable of recording temperature and humidity were deployed to Burkina Faso (8), Senegal (10), Ethiopia (13) and the Philippines (6) over a 13-month period. The devices travelled through government supply chains, usually alongside RDTs, to health facilities where RDTs are stored, distributed and used. The recording period spanned just over a year, in order to avoid any biases related to seasonal temperature variations. Results In the four countries, storage and transport temperatures regularly exceeded 30.0°C; maximum humidity level recorded was above 94% for the four countries. In three of the four countries, temperatures recorded at central storage facilities exceeded pharmaceutical storage standards for over 20% of the time, in another case for a majority of the time; and sometimes exceeded storage temperatures at peripheral sites. Conclusions Malaria RDTs were regularly exposed to temperatures above recommended limits for many commercially-available RDTs and other medical commodities such as drugs, but rarely exceeded the recommended storage limits for particular products in use in these countries. The results underline the need to select RDTs, and other commodities, according to expected field conditions, actively manage the environmental conditions in supply chains in tropical and sub-tropical climates. This would benefit from a re-visit of current global standards on stability of medical commodities based in tropical and sub-tropical climatic zones. PMID:23217104

Malaria rapid diagnostic test transport and storage conditions in Burkina Faso, Senegal, Ethiopia and the Philippines.

PubMed

Albertini, Audrey; Lee, Evan; Coulibaly, Sheick Oumar; Sleshi, Markos; Faye, Babacar; Mationg, Mary Lorraine; Ouedraogo, Kadi; Tsadik, Abeba G; Feleke, Sendeaw Maksha; Diallo, Ibrahima; Gaye, Oumar; Luchavez, Jennifer; Bennett, Jessica; Bell, David

2012-12-06

As more point of care diagnostics become available, the need to transport and store perishable medical commodities to remote locations increases. As with other diagnostics, malaria rapid diagnostic tests (RDTs) must be highly reliable at point of use, but exposure to adverse environmental conditions during distribution has the potential to degrade tests and accuracy. In remote locations, poor quality diagnostics and drugs may have significant negative health impact that is not readily detectable by routine monitoring. This study assessed temperature and humidity throughout supply chains used to transport and store health commodities, such as RDTs. Monitoring devices capable of recording temperature and humidity were deployed to Burkina Faso (8), Senegal (10), Ethiopia (13) and the Philippines (6) over a 13-month period. The devices travelled through government supply chains, usually alongside RDTs, to health facilities where RDTs are stored, distributed and used. The recording period spanned just over a year, in order to avoid any biases related to seasonal temperature variations. In the four countries, storage and transport temperatures regularly exceeded 30.0°C; maximum humidity level recorded was above 94% for the four countries. In three of the four countries, temperatures recorded at central storage facilities exceeded pharmaceutical storage standards for over 20% of the time, in another case for a majority of the time; and sometimes exceeded storage temperatures at peripheral sites. Malaria RDTs were regularly exposed to temperatures above recommended limits for many commercially-available RDTs and other medical commodities such as drugs, but rarely exceeded the recommended storage limits for particular products in use in these countries. The results underline the need to select RDTs, and other commodities, according to expected field conditions, actively manage the environmental conditions in supply chains in tropical and sub-tropical climates. This would benefit from a re-visit of current global standards on stability of medical commodities based in tropical and sub-tropical climatic zones.

A risk assessment of dietary Ochratoxin a in the United States.

PubMed

Mitchell, Nicole J; Chen, Chen; Palumbo, Jeffrey D; Bianchini, Andreia; Cappozzo, Jack; Stratton, Jayne; Ryu, Dojin; Wu, Felicia

2017-02-01

Ochratoxin A (OTA) is a mycotoxin (fungal toxin) found in multiple foodstuffs. Because OTA has been shown to cause kidney disease in multiple animal models, several governmental bodies around the world have set maximum allowable levels of OTA in different foods and beverages. In this study, we conducted the first exposure and risk assessment study of OTA for the United States' population. A variety of commodities from grocery stores across the US were sampled for OTA over a 2-year period. OTA exposure was calculated from the OTA concentrations in foodstuffs and consumption data for different age ranges. We calculated the margin of safety (MOS) for individual age groups across all commodities of interest. Most food and beverage samples were found to have non-detectable OTA; however, some samples of dried fruits, breakfast cereals, infant cereals, and cocoa had detectable OTA. The lifetime MOS in the US population within the upper 95% of consumers of all possible commodities was >1, indicating negligible risk. In the US, OTA exposure is highest in infants and young children who consume large amounts of oat-based cereals. Even without OTA standards in the US, exposures would not be associated with significant risk of adverse effects. Copyright © 2016 Elsevier Ltd. All rights reserved.

23 CFR 658.17 - Weight.

Code of Federal Regulations, 2012 CFR

2012-04-01

... the bridge formula. (c) The maximum gross weight upon any one axle, including any one axle of a group... following formula, referred to as the Bridge Gross Weight Formula: EC14OC91.012 except that two consecutive... derived from the Bridge Formula, up to a maximum of 80,000 pounds, including all enforcement tolerances...

23 CFR 658.17 - Weight.

Code of Federal Regulations, 2011 CFR

2011-04-01

... the bridge formula. (c) The maximum gross weight upon any one axle, including any one axle of a group... following formula, referred to as the Bridge Gross Weight Formula: EC14OC91.012 except that two consecutive... derived from the Bridge Formula, up to a maximum of 80,000 pounds, including all enforcement tolerances...

Thresholding Based on Maximum Weighted Object Correlation for Rail Defect Detection

NASA Astrophysics Data System (ADS)

Li, Qingyong; Huang, Yaping; Liang, Zhengping; Luo, Siwei

Automatic thresholding is an important technique for rail defect detection, but traditional methods are not competent enough to fit the characteristics of this application. This paper proposes the Maximum Weighted Object Correlation (MWOC) thresholding method, fitting the features that rail images are unimodal and defect proportion is small. MWOC selects a threshold by optimizing the product of object correlation and the weight term that expresses the proportion of thresholded defects. Our experimental results demonstrate that MWOC achieves misclassification error of 0.85%, and outperforms the other well-established thresholding methods, including Otsu, maximum correlation thresholding, maximum entropy thresholding and valley-emphasis method, for the application of rail defect detection.

Controls of the U.S. Virtual Water Transfer Network

NASA Astrophysics Data System (ADS)

Garcia, S.; Mejia, A.

2017-12-01

A complex interplay of human and natural factors shape the economic geography of the U.S., operating through socioeconomic forces that drive the consumption, production, and exchange of commodities. The virtual water content of a commodity represents the water embedded in its production. This work investigates the controls of national bilateral transfers of the virtual water transfer network (VWTN), through a gravity-type spatial interaction model. We use a probabilistic model to predict the binary network and investigate whether the gravity model can explain the topological properties of the empirical weighted network. In general, the gravity model relates transfer flows to the mass of the trading regions and their geographical distance. We hypothesize that properties of the nodes such as population, employment, and availability of land, together with the Euclidean distance between two trading regions, capture the main drivers of the national VWTN. The results from the model are then compared to the empirical weighted network to verify its ability to model the structure of this self-organized system. The proposed empirical model provides insight into the processes that underlie the formation of the VWTN. It can be a promising tool to study how flows are affected by changes in the generating conditions due to shocks and/or stresses.

Dynamic deformation analysis of light-weight mirror

NASA Astrophysics Data System (ADS)

Zhang, Yingtao; Cao, Xuedong; Kuang, Long; Yang, Wei

2012-10-01

In the process of optical dynamic target work, under the effort of the arm of dynamic target, the mirror needs to do circular motion, additional accelerated motion and uniform motion. The maximum acceleration is 10°/s2 and the maximum velocity is 30°/s. In this paper, we mostly analyze the dynamic deformation of a 600 mm honeycomb light-weight mirror of a certain dynamic target. Using the FEA (finite element analysis) method, first of all, we analyze the deformation of the light-weight mirror induced in gravity at different position; later, the dynamic deformation of light-weight mirror is analyzed in detailed. The analysis results indicate that, when the maximum acceleration is 10°/s2 and the maximum velocity is 30°/s, the centripetal force is 5% of the gravity at the equal mass, and the dynamic deformation of the mirror is 6.1% of the deformation induced by gravity.

Selective effects of weight and inertia on maximum lifting.

PubMed

Leontijevic, B; Pazin, N; Kukolj, M; Ugarkovic, D; Jaric, S

2013-03-01

A novel loading method (loading ranged from 20% to 80% of 1RM) was applied to explore the selective effects of externally added simulated weight (exerted by stretched rubber bands pulling downward), weight+inertia (external weights added), and inertia (covariation of the weights and the rubber bands pulling upward) on maximum bench press throws. 14 skilled participants revealed a load associated decrease in peak velocity that was the least associated with an increase in weight (42%) and the most associated with weight+inertia (66%). However, the peak lifting force increased markedly with an increase in both weight (151%) and weight+inertia (160%), but not with inertia (13%). As a consequence, the peak power output increased most with weight (59%), weight+inertia revealed a maximum at intermediate loads (23%), while inertia was associated with a gradual decrease in the peak power output (42%). The obtained findings could be of importance for our understanding of mechanical properties of human muscular system when acting against different types of external resistance. Regarding the possible application in standard athletic training and rehabilitation procedures, the results speak in favor of applying extended elastic bands which provide higher movement velocity and muscle power output than the usually applied weights. © Georg Thieme Verlag KG Stuttgart · New York.

A method for calculating a land-use change carbon footprint (LUC-CFP) for agricultural commodities - applications to Brazilian beef and soy, Indonesian palm oil.

PubMed

Persson, U Martin; Henders, Sabine; Cederberg, Christel

2014-11-01

The world's agricultural system has come under increasing scrutiny recently as an important driver of global climate change, creating a demand for indicators that estimate the climatic impacts of agricultural commodities. Such carbon footprints, however, have in most cases excluded emissions from land-use change and the proposed methodologies for including this significant emissions source suffer from different shortcomings. Here, we propose a new methodology for calculating land-use change carbon footprints for agricultural commodities and illustrate this methodology by applying it to three of the most prominent agricultural commodities driving tropical deforestation: Brazilian beef and soybeans, and Indonesian palm oil. We estimate land-use change carbon footprints in 2010 to be 66 tCO2 /t meat (carcass weight) for Brazilian beef, 0.89 tCO2 /t for Brazilian soybeans, and 7.5 tCO2 /t for Indonesian palm oil, using a 10 year amortization period. The main advantage of the proposed methodology is its flexibility: it can be applied in a tiered approach, using detailed data where it is available while still allowing for estimation of footprints for a broad set of countries and agricultural commodities; it can be applied at different scales, estimating both national and subnational footprints; it can be adopted to account both for direct (proximate) and indirect drivers of land-use change. It is argued that with an increasing commercialization and globalization of the drivers of land-use change, the proposed carbon footprint methodology could help leverage the power needed to alter environmentally destructive land-use practices within the global agricultural system by providing a tool for assessing the environmental impacts of production, thereby informing consumers about the impacts of consumption and incentivizing producers to become more environmentally responsible. © 2014 John Wiley & Sons Ltd.

Maximizing profit on New England organic dairy farms: an economic comparison of 4 total mixed rations for organic Holsteins and Jerseys.

PubMed

Marston, S P; Clark, G W; Anderson, G W; Kersbergen, R J; Lunak, M; Marcinkowski, D P; Murphy, M R; Schwab, C G; Erickson, P S

2011-06-01

The objective of these experiments was to compare 4 total mixed rations fed to USDA-certified organic dairy cows in New England. Forty-eight Jersey cows from the University of New Hampshire (UNH) and 64 Holstein cows from the University of Maine (UMaine) were assigned to a 2 × 2 factorial arrangement of treatments testing the main effects of corn silage versus grass silage as the forage base and commodity concentrates versus a complete pelleted concentrate mixture. Treatment diets were fed as a total mixed ration for 8 wk during the winter and spring months of 2007, 2008, and 2009. Milk yield, component, and quality data were recorded and used to calculate the value of the milk produced for each cow. The dry matter intake (DMI) was recorded and used to calculate the average cost per cow per day of each diet. Income over feed costs were calculated for each diet using milk value and feed cost data. Feed cost and income over feed cost data were resampled using bootstrap methodology to examine potential patterns. Milk yield, milk fat and true protein concentrations, and SCC were similar among treatments. Cows at UNH fed corn silage tended to have higher DMI and lower milk urea nitrogen than did cows fed grass silage, whereas cows fed pellets had higher DMI than cows fed commodities. Cows at UNH fed commodities tended to have higher body condition scores than those fed pellets. Cows at UMaine fed commodities tended to have higher DMI than did cows fed pellets, and cows fed corn silage had lower milk urea nitrogen than did cows fed grass silage. Body weights and body condition scores were not different for cows at UMaine. Feed costs were significantly higher for corn silage diets and diets at UNH containing pellets, but not at UMaine. The calculated value of the milk and income over feed costs did not differ among treatments at either university. Bootstrap replications indicated that the corn silage with commodities diet generally had the highest feed cost at both UNH and UMaine, whereas grass silage diets containing commodities generally had the lowest cost. In contrast, the grass silage with commodities diets had the highest income over feed cost in the majority of the replications at both UNH and UMaine replications, whereas the corn silage with commodities diets had the lowest rank. Similar results were observed when forage prices were increased or decreased by 5, 10, and 25% above or below the actual feed price. Feeding a grass silage-based diet supplemented with commodity concentrates may have an economic advantage for dairy producers in New England operating under an organic system of production. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Maximum likelihood estimation of signal-to-noise ratio and combiner weight

NASA Technical Reports Server (NTRS)

Kalson, S.; Dolinar, S. J.

1986-01-01

An algorithm for estimating signal to noise ratio and combiner weight parameters for a discrete time series is presented. The algorithm is based upon the joint maximum likelihood estimate of the signal and noise power. The discrete-time series are the sufficient statistics obtained after matched filtering of a biphase modulated signal in additive white Gaussian noise, before maximum likelihood decoding is performed.

14 CFR 27.473 - Ground loading conditions and assumptions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... maximum weight must be used that is not less than the maximum weight. A rotor lift may be assumed to act through the center of gravity throughout the landing impact. This lift may not exceed two-thirds of the...

14 CFR 27.473 - Ground loading conditions and assumptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... maximum weight must be used that is not less than the maximum weight. A rotor lift may be assumed to act through the center of gravity throughout the landing impact. This lift may not exceed two-thirds of the...

14 CFR 29.473 - Ground loading conditions and assumptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... maximum weight must be used that is not less than the maximum weight. A rotor lift may be assumed to act through the center of gravity throughout the landing impact. This lift may not exceed two-thirds of the...

14 CFR 29.473 - Ground loading conditions and assumptions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... maximum weight must be used that is not less than the maximum weight. A rotor lift may be assumed to act through the center of gravity throughout the landing impact. This lift may not exceed two-thirds of the...

40 CFR 201.26 - Procedures for the measurement on receiving property of retarder and car coupling noise.

Code of Federal Regulations, 2010 CFR

2010-07-01

... maximum A-weighted sound levels (FAST) for every retarder sound observed during the measurement period... performance as appropriate. (2) Data. The maximum A-weighted sound levels (FAST) for every car coupling impact...

Photoactive layered nanocomposites obtained by direct transferring of anodic TiO2 nanotubes to commodity thermoplastics

NASA Astrophysics Data System (ADS)

Sanz, Ruy; Buccheri, Maria Antonietta; Zimbone, Massimo; Scuderi, Viviana; Amiard, Guillaume; Impellizzeri, Giuliana; Romano, Lucia; Privitera, Vittorio

2017-03-01

TiO2 nanotubes demonstrated to be a versatile nanostructure for biomaterials, clean energy and water remediation applications. However, the cost of titanium and the poor mechanical properties of the nanotubes hinder their adoption at large scale. This work presents a straightforward and scalable method for transferring photoactive anodic TiO2 nanotubes from titanium foils to commodity thermoplastic polymers, polypropylene, polyethylene terephthalate, polycarbonate, and polymethylmetacrylate, allowing the reusing of the remaining titanium. The obtained flexible nanocomposites reach a maximum photonic efficiencies of 0.038% (ISO-10678:2010) representing the 93% of photonic efficiency of TiO2 nanotubes on titanium. In addition, the nanocomposites and TiO2 nanotubes on titanium present similar antibacterial properties under 1 mW cm-2 UV-A, 60% of Escherichia coli survival after 1 h of exposition. The final objective of this work is to point out main concepts and key parameters for a low-cost fabrication of a photoactive nanocomposite material.

17 CFR 4.41 - Advertising by commodity pool operators, commodity trading advisors, and the principals thereof.

Code of Federal Regulations, 2010 CFR

2010-04-01

... operators, commodity trading advisors, and the principals thereof. 4.41 Section 4.41 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS Advertising § 4.41 Advertising by commodity pool operators, commodity trading advisors, and the...

Implied Maximum Dose Analysis of Standard Values of 25 Pesticides Based on Major Human Exposure Pathways

PubMed Central

Li, Zijian; Jennings, Aaron A.

2017-01-01

Worldwide jurisdictions are making efforts to regulate pesticide standard values in residential soil, drinking water, air, and agricultural commodity to lower the risk of pesticide impacts on human health. Because human may exposure to pesticides from many ways, such as ingestion, inhalation, and dermal contact, it is important to examine pesticide standards by considering all major exposure pathways. Analysis of implied maximum dose limits for commonly historical and current used pesticides was adopted in this study to examine whether worldwide pesticide standard values are enough to prevent human health impact or not. Studies show that only U.S. has regulated pesticides standard in the air. Only 4% of the total number of implied maximum dose limits is based on three major exposures. For Chlorpyrifos, at least 77.5% of the total implied maximum dose limits are above the acceptable daily intake. It also shows that most jurisdictions haven't provided pesticide standards in all major exposures yet, and some of the standards are not good enough to protect human health. PMID:29546224

14 CFR 29.87 - Height-velocity envelope.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Weight from the maximum weight (at sea level) to the highest weight approved for takeoff and landing at each altitude. For helicopters, this weight need not exceed the highest weight allowing hovering out-of...

14 CFR 29.87 - Height-velocity envelope.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Weight from the maximum weight (at sea level) to the highest weight approved for takeoff and landing at each altitude. For helicopters, this weight need not exceed the highest weight allowing hovering out-of...

14 CFR 29.87 - Height-velocity envelope.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Weight from the maximum weight (at sea level) to the highest weight approved for takeoff and landing at each altitude. For helicopters, this weight need not exceed the highest weight allowing hovering out-of...

14 CFR 29.87 - Height-velocity envelope.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Weight from the maximum weight (at sea level) to the highest weight approved for takeoff and landing at each altitude. For helicopters, this weight need not exceed the highest weight allowing hovering out-of...

Association between summer temperature and body weight in Japanese adolescents and children: An ecological analysis.

PubMed

Yokoya, Masana; Higuchi, Yukito

2016-11-01

Several experimental studies reported evidence of a negative energy balance at higher temperatures. However, corresponding weight loss has not been noted in clinical practice. This study investigated the geographical association between outdoor temperature and body weight in Japanese adolescents and children. An ecological analysis was conducted using prefecture-level data on the mean body weight of Japanese adolescents and children over a 25-year period and Japanese mesh (regional) climatic data on the mean annual temperature, mean daily maximum temperature in August, and mean daily minimum temperature in January were also analyzed. Correlation analysis uncovered a stronger association between weight and the mean daily maximum temperature in August than with other climatic variables. Moreover, multiple regression analysis indicated that height and the mean daily maximum temperature in August were statistically significant predictors of weight. This suggests that geographical differences in weight in Japanese adolescents and children can be explained by the complementary relationship between height-associated weight gain and weight loss caused by summer heat. Summer temperatures may reduce the proportion of children who are overweight and contribute to geographical differences in body weight in Japanese adolescents and children. Am. J. Hum. Biol. 28:789-795, 2016. © 2016Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Exploiting the Maximum Entropy Principle to Increase Retrieval Effectiveness.

ERIC Educational Resources Information Center

Cooper, William S.

1983-01-01

Presents information retrieval design approach in which queries of computer-based system consist of sets of terms, either unweighted or weighted with subjective term precision estimates, and retrieval outputs ranked by probability of usefulness estimated by "maximum entropy principle." Boolean and weighted request systems are discussed.…

Study & report to Congress : applicability of maximum axle weight limitations to over-the-road and public transit buses

DOT National Transportation Integrated Search

2003-12-01

The Senate Report on the Fiscal Year (FY) 2002 U.S. Department of Transportation : (DOT) appropriations bill requested that the Department conduct a study and submit to : Congress a report on the applicability of Federal maximum weight limitations to...

41 CFR 302-7.2 - What is the maximum weight of HHG that may be transported or stored at Government expense?

Code of Federal Regulations, 2010 CFR

2010-07-01

... STORAGE OF PROPERTY 7-TRANSPORTATION AND TEMPORARY STORAGE OF HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) General Rules § 302-7.2 What is the maximum weight of HHG that may be...

14 CFR 23.733 - Tires.

Code of Federal Regulations, 2010 CFR

2010-01-01

... approved for such tires) equal to the corresponding static ground reaction under the design maximum weight... rating approved for such tires) equal to the reaction obtained at the nose wheel, assuming the mass of... downward and 0.31 W forward (where W is the design maximum weight), with the reactions distributed to the...

14 CFR 23.733 - Tires.

Code of Federal Regulations, 2011 CFR

2011-01-01

... approved for such tires) equal to the corresponding static ground reaction under the design maximum weight... rating approved for such tires) equal to the reaction obtained at the nose wheel, assuming the mass of... downward and 0.31 W forward (where W is the design maximum weight), with the reactions distributed to the...

14 CFR 23.77 - Balked landing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... reciprocating engine-powered and single engine turbine powered airplane of more than 6,000 pounds maximum weight, and multiengine turbine engine-powered airplane of 6,000 pounds or less maximum weight in the normal... of movement of the power controls from minimum flight-idle position; (2) The landing gear extended...

14 CFR 23.77 - Balked landing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... reciprocating engine-powered and single engine turbine powered airplane of more than 6,000 pounds maximum weight, and multiengine turbine engine-powered airplane of 6,000 pounds or less maximum weight in the normal... of movement of the power controls from minimum flight-idle position; (2) The landing gear extended...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2010 CFR

2010-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2014 CFR

2014-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2012 CFR

2012-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2013 CFR

2013-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

49 CFR 450.7 - Marking.

Code of Federal Regulations, 2011 CFR

2011-10-01

... APPROVAL OF CARGO CONTAINERS GENERAL General Provisions § 450.7 Marking. (a) On each container that construction begins on or after January 1, 1984, all maximum gross weight markings on the container must be consistent with the maximum gross weight information on the safety approval plate. (b) On each container that...

17 CFR 5.4 - Applicability of part 4 of this chapter to commodity pool operators and commodity trading advisors.

Code of Federal Regulations, 2013 CFR

2013-04-01

... this chapter to commodity pool operators and commodity trading advisors. 5.4 Section 5.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFF-EXCHANGE FOREIGN CURRENCY TRANSACTIONS § 5.4 Applicability of part 4 of this chapter to commodity pool operators and commodity trading advisors. Part 4 of...

17 CFR 5.4 - Applicability of part 4 of this chapter to commodity pool operators and commodity trading advisors.

Code of Federal Regulations, 2012 CFR

2012-04-01

... this chapter to commodity pool operators and commodity trading advisors. 5.4 Section 5.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFF-EXCHANGE FOREIGN CURRENCY TRANSACTIONS § 5.4 Applicability of part 4 of this chapter to commodity pool operators and commodity trading advisors. Part 4 of...

Selective Effects of Training Against Weight and Inertia on Muscle Mechanical Properties.

PubMed

Djuric, Sasa; Cuk, Ivan; Sreckovic, Sreten; Mirkov, Dragan; Nedeljkovic, Aleksandar; Jaric, Slobodan

2016-10-01

To explore the effects of training against mechanically different types of loads on muscle force (F), velocity (V), and power (P) outputs. Subjects practiced maximum bench throws over 8 wk against a bar predominantly loaded by approximately constant external force (weight), weight plates (weight plus inertia), or weight plates whose weight was compensated by a constant external force pulling upward (inertia). Instead of a typically applied single trial performed against a selected load, the pretest and posttest consisted of the same task performed against 8 different loads ranging from 30% to 79% of the subject's maximum strength applied by adding weight plates to the bar. That provided a range of F and V data for subsequent modeling by linear F-V regression revealing the maximum F (F-intercept), V (V-intercept), and P (P = FV/4). Although all 3 training conditions resulted in increased P, the inertia type of the training load could be somewhat more effective than weight. An even more important finding was that the P increase could be almost exclusively based on a gain in F, V, or both when weight, inertia, or weight-plus-inertia training load were applied, respectively. The inertia training load is more effective than weight in increasing P and weight and inertia may be applied for selective gains in F and V, respectively, whereas the linear F-V model obtained from loaded trials could be used for discerning among muscle F, V, and P.

17 CFR 4.13 - Exemption from registration as a commodity pool operator.

Code of Federal Regulations, 2011 CFR

2011-04-01

... a commodity pool operator. 4.13 Section 4.13 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS General Provisions, Definitions and Exemptions § 4.13 Exemption from registration as a commodity pool operator. This section is...

17 CFR 32.9 - Fraud in connection with commodity option transactions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Fraud in connection with commodity option transactions. 32.9 Section 32.9 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION TRANSACTIONS § 32.9 Fraud in connection with commodity...

Weight compensation characteristics of Armeo®Spring exoskeleton: implications for clinical practice and research.

PubMed

Perry, Bonnie E; Evans, Emily K; Stokic, Dobrivoje S

2017-02-17

Armeo®Spring exoskeleton is widely used for upper extremity rehabilitation; however, weight compensation provided by the device appears insufficiently characterized to fully utilize it in clinical and research settings. Weight compensation was quantified by measuring static force in the sagittal plane with a load cell attached to the elbow joint of Armeo®Spring. All upper spring settings were examined in 5° increments at the minimum, maximum, and two intermediate upper and lower module length settings, while keeping the lower spring at minimum. The same measurements were made for minimum upper spring setting and maximum lower spring setting at minimum and maximum module lengths. Weight compensation was plotted against upper module angles, and slope was analyzed for each condition. The Armeo®Spring design prompted defining the slack angle and exoskeleton balance angle, which, depending on spring and length settings, divide the operating range into different unloading and loading regions. Higher spring tensions and shorter module lengths provided greater unloading (≤6.32 kg of support). Weight compensation slope decreased faster with shorter length settings (minimum length = -0.082 ± 0.002 kg/°; maximum length = -0.046 ± 0.001 kg/°) independent of spring settings. Understanding the impact of different settings on the Armeo®Spring weight compensation should help define best clinical practice and improve fidelity of research.

Costs of food waste along the value chain: evidence from South Africa.

PubMed

Nahman, Anton; de Lange, Willem

2013-11-01

In a previous paper (Nahman et al., 2012), the authors estimated the costs of household food waste in South Africa, based on the market value of the wasted food (edible portion only), as well as the costs of disposal to landfill. In this paper, we extend the analysis by assessing the costs of edible food waste throughout the entire food value chain, from agricultural production through to consumption at the household level. First, food waste at each stage of the value chain was quantified in physical units (tonnes) for various food commodity groups. Then, weighted average representative prices (per tonne) were estimated for each commodity group at each stage of the value chain. Finally, prices were multiplied by quantities, and the resulting values were aggregated across the value chain for all commodity groups. In this way, the total cost of food waste across the food value chain in South Africa was estimated at R61.5 billion per annum (approximately US$7.7 billion); equivalent to 2.1% of South Africa's annual gross domestic product. The bulk of this cost arises from the processing and distribution stages of the fruit and vegetable value chain, as well as the agricultural production and distribution stages of the meat value chain. These results therefore provide an indication of where interventions aimed at reducing food waste should be targeted. Copyright © 2013 Elsevier Ltd. All rights reserved.

Increasing homogeneity in global food supplies and the implications for food security

PubMed Central

Khoury, Colin K.; Bjorkman, Anne D.; Dempewolf, Hannes; Ramirez-Villegas, Julian; Guarino, Luigi; Jarvis, Andy; Rieseberg, Loren H.; Struik, Paul C.

2014-01-01

The narrowing of diversity in crop species contributing to the world’s food supplies has been considered a potential threat to food security. However, changes in this diversity have not been quantified globally. We assess trends over the past 50 y in the richness, abundance, and composition of crop species in national food supplies worldwide. Over this period, national per capita food supplies expanded in total quantities of food calories, protein, fat, and weight, with increased proportions of those quantities sourcing from energy-dense foods. At the same time the number of measured crop commodities contributing to national food supplies increased, the relative contribution of these commodities within these supplies became more even, and the dominance of the most significant commodities decreased. As a consequence, national food supplies worldwide became more similar in composition, correlated particularly with an increased supply of a number of globally important cereal and oil crops, and a decline of other cereal, oil, and starchy root species. The increase in homogeneity worldwide portends the establishment of a global standard food supply, which is relatively species-rich in regard to measured crops at the national level, but species-poor globally. These changes in food supplies heighten interdependence among countries in regard to availability and access to these food sources and the genetic resources supporting their production, and give further urgency to nutrition development priorities aimed at bolstering food security. PMID:24591623

Alternative Fuels Data Center

Science.gov Websites

gross vehicle weight limits by a weight equal to the difference between the average weight of the diesel tank and fueling system. The NGV maximum gross weight may not exceed 82,000 pounds. (Reference

Alternative Fuels Data Center

Science.gov Websites

the state's gross vehicle weight limits by a weight equal to the difference between the weight of the tank and fueling system. The NGV maximum gross weight may not exceed 82,000 pounds. (Reference Senate

The Effects of 24 weeks of Resistance Training with Simultaneous Elastic and Free Weight Loading on Muscular Performance of Novice Lifters.

PubMed

Shoepe, Todd C; Ramirez, David A; Rovetti, Robert J; Kohler, David R; Almstedt, Hawley C

2011-09-01

The purpose of this investigation was to assess the effectiveness of variable resistance as provided through elastic plus free weight techniques in college aged males and females. Twenty novice lifters were randomly assigned to a traditional free weight only (6 males and 5 females) or elastic band plus free weight group (5 males and 5 females) and 9 more normally active controls (5 males and 4 females), were recruited to maintain normal activity for the duration of the study. No differences existed between control, free weight and elastic band at baseline for age, body height, body mass, body mass index, and body fat percentage. One-repetition maximums were performed for squat and bench press while both strength and power were assessed using isokinetic dynamometry. Elastic groups and free-weight groups completed 24 weeks of whole body, periodized, high intensity resistance (65-95% of one-repetition maximum) training three times/week. Training programs were identical except that the elastic group trained the barbell squat, bench press and stiff-legged deadlift with 20-35% of their total prescribed training loads coming from band resistance (assessed at the top of the range of motion) with the remainder from free weight resistance. A mixed-model analysis revealed that peak torque, average power and one-repetition maximums for squat were significantly greater after training for the elastic group compared to the control (p<0.05). In addition, the free weight group also showed significantly greater improvements over the control in peak torque and one-repetition maximums for squat and bench press. No significant differences were observed between the elastic band and free weight groups. Combined variable elastic band plus free weight exercises are effective at increasing strength and power similar to free-weights alone in novice college aged males and females. However, due to complexity in set-up and load assignment elastic adoption by novice lifters in an unsupervised situation is not advised.

The Principles and the Specifics of Trading in Commodities

NASA Astrophysics Data System (ADS)

Baran, Dušan; Herbacsková, Anita

2012-12-01

In the present period of instability on financial markets, investments in commodities are the solution for elimination of the consequences of inflation and ensure the yield. When investing in commodities, the use of specifics of commodities compared to other assets. The distribution of commodities we can interpret for agricultural commodities, commodities of energy, precious and other metals, and weather. Therefore, in the framework of the investment portfolio are the commodities. This is the reason why one of the most popular types of investment assets now become commodities. In the interpretation of particular commodities we talk about commodity futures. The reason is that the spot market with commodities is limited storage facilities. The growth of the popularity, which allows a wide range of commodities, has caused that in addition to from institutional investors and speculators for trade may involve even small investors. This development will be supplemented by interpretation of the charts and figers, which will be commented and used for generalization of knowledge. Finally, the article will be interpreted by the further development of the market for commodities as it by article assumes from the results of research.

Research on public logistics centers of Zhenzhou city based on GIS

NASA Astrophysics Data System (ADS)

Zeng, Yuhuai; Chen, Shuisen; Tian, Zhihui; Miao, Quansheng

2008-10-01

The regional public logistics center (PLC) is the intermedium that transports goods or commodity from producer to wholesaler, retailer and end consumer through whole supply chains. According to the Central Place Theory, the PLC should be multi-centric and of more kinds of graded degrees. From the road network planning discipline, an unique index---Importance Degree, is presented to measure the capacity of a PLC. The Importance Degree selects three township criteria: total population, gross industry product and budget income as weights to calculate the weighted vectors by principle component analysis method. Finally, through the clustering analysis, we can get the graded degrees of PLCs. It proves that that this research method is very effective for the road network planning of Zhengzhou City.

Equivalent charge source model based iterative maximum neighbor weight for sparse EEG source localization.

PubMed

Xu, Peng; Tian, Yin; Lei, Xu; Hu, Xiao; Yao, Dezhong

2008-12-01

How to localize the neural electric activities within brain effectively and precisely from the scalp electroencephalogram (EEG) recordings is a critical issue for current study in clinical neurology and cognitive neuroscience. In this paper, based on the charge source model and the iterative re-weighted strategy, proposed is a new maximum neighbor weight based iterative sparse source imaging method, termed as CMOSS (Charge source model based Maximum neighbOr weight Sparse Solution). Different from the weight used in focal underdetermined system solver (FOCUSS) where the weight for each point in the discrete solution space is independently updated in iterations, the new designed weight for each point in each iteration is determined by the source solution of the last iteration at both the point and its neighbors. Using such a new weight, the next iteration may have a bigger chance to rectify the local source location bias existed in the previous iteration solution. The simulation studies with comparison to FOCUSS and LORETA for various source configurations were conducted on a realistic 3-shell head model, and the results confirmed the validation of CMOSS for sparse EEG source localization. Finally, CMOSS was applied to localize sources elicited in a visual stimuli experiment, and the result was consistent with those source areas involved in visual processing reported in previous studies.

17 CFR 32.13 - Exemption from prohibition of commodity option transactions for trade options on certain...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Exemption from prohibition of commodity option transactions for trade options on certain agricultural commodities. 32.13 Section 32.13 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION TRANSACTIONS § 32.13 Exemption from...

Two Essays in Financial Economics

NASA Astrophysics Data System (ADS)

Putnam, Kyle J.

The following dissertation contains two distinct empirical essays which contribute to the overall field of Financial Economics. Chapter 1, entitled "The Determinants of Dynamic Dependence: An Analysis of Commodity Futures and Equity Markets," examines the determinants of the dynamic equity-commodity return correlations between five commodity futures sub-sectors (energy, foods and fibers, grains and oilseeds, livestock, and precious metals) and a value-weighted equity market index (S&P 500). The study utilizes the traditional DCC model, as well as three time-varying copulas: (i) the normal copula, (ii) the student's t copula, and (iii) the rotated-gumbel copula as dependence measures. Subsequently, the determinants of these various dependence measures are explored by analyzing several macroeconomic, financial, and speculation variables over different sample periods. Results indicate that the dynamic equity-commodity correlations for the energy, grains and oilseeds, precious metals, and to a lesser extent the foods and fibers, sub-sectors have become increasingly explainable by broad macroeconomic and financial market indicators, particularly after May 2003. Furthermore, these variables exhibit heterogeneous effects in terms of both magnitude and sign on each sub-sectors' equity-commodity correlation structure. Interestingly, the effects of increased financial market speculation are found to be extremely varied among the five sub-sectors. These results have important implications for portfolio selection, price formation, and risk management. Chapter 2, entitled, "US Community Bank Failure: An Empirical Investigation," examines the declining, but still pivotal role, of the US community banking industry. The study utilizes survival analysis to determine which accounting and macroeconomic variables help to predict community bank failure. Federal Deposit Insurance Corporation and Federal Reserve Bank data are utilized to compare 452 community banks which failed between 2000 and 2013, relative to a sample of surviving community banks. Empirical results indicate that smaller banks are less likely to fail than their larger community bank counterparts. Additionally, several unique bank-specific indicators of failure emerge which relate to asset quality and liquidity, as well as earnings ratios. Moreover, results show that the use of the macroeconomic indicator of liquidity, the TED spread, provides a substantial improvement in modeling predictive community bank failure.

17 CFR 5.4 - Applicability of part 4 of this chapter to commodity pool operators and commodity trading advisors.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Applicability of part 4 of this chapter to commodity pool operators and commodity trading advisors. 5.4 Section 5.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFF-EXCHANGE FOREIGN CURRENCY TRANSACTIONS § 5.4...

14 CFR 23.1583 - Operating limitations.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) The maximum zero wing fuel weight, where relevant, as established in accordance with § 23.343. (d... passenger seating configuration. The maximum passenger seating configuration. (k) Allowable lateral fuel loading. The maximum allowable lateral fuel loading differential, if less than the maximum possible. (l...

Implications of Climate Volatility for Agricultural Commodity Markets in the Presence of Biofuel Mandates

NASA Astrophysics Data System (ADS)

Verma, M.; Diffenbaugh, N. S.; Hertel, T. W.; Beckman, J.

2011-12-01

In presence of bio-fuels, link between energy and agricultural commodity markets has become more complex. An increase in ethanol production to minimum 15bn gallons a year - Renewable Fuel Standard (RFS) and current technically permissible maximum 10% blending limit - Blend Wall (BW); make the link even stronger. If oil prices in future do not rise significantly from their current levels, this minimum production requirement would likely be binding. In such a scenario any fluctuation in crop production will have to be absorbed by the non-ethanol usage of the crop and would translate into crop prices adjusting to clear the markets and therefore the commodity prices will be more volatile. At high oil prices it is possible that the BW may become binding, severing the link between oil prices and commodity prices as well, potentially leading to higher price volatility. Hertel and Beckman (2010) find that, with both RFS and BW simultaneously binding, corn price volatility due to supply side shocks (which could arise from extreme climate events) could be more than 50% as large as in the absence of bio-fuel policies. So energy markets are important determinants of agricultural commodity price volatility. This proposal intends to introduce the increased supply side volatility on account of climate change and volatility, in the framework. Global warming on account of increased GHG concentrations is expected to increase the intensity and frequency of hot extremes in US (Diffenbaugh et al. 2008) and therefore affect corn yields. With supply shocks expected to increase, binding RFS and BW will exacerbate the volatility, while if they are non-binding then the price changes could be cushioned. We propose to model the impacts of climate changes and volatility on commodity prices by linking three main components - a. Projections for change in temperature and precipitation using climate model b. A statistical model to predict impacts of change in climate variable on corn yields in US c. Computable General Equilibrium economic model that uses the results of the two above as inputs, to predict commodity prices under alternative energy price scenarios We start with the high resolution projections on temperature and precipitation for US corn-belt for years 2020-2040. A modified version of statistical relationship estimated by Schlenker and Roberts, is used to translate climate variables' change into yield changes for each. Shocks are sampled from this distribution to decipher the corresponding volatility in commodity prices. All else constant, the increased supply side variability should result in increased price volatility; high oil prices however give markets an incentive to produce more than 15bn gallons ethanol a year (non-binding RFS) and part of supply fluctuation in crop production can be borne by ethanol production and impact of climate change on crop prices would be less dramatic than it would have been if the entire adjustment was to come through non-ethanol usage. So impact of climate change clearly depends on energy markets and policy decisions and results should provide insights into impact of climate change on agricultural prices under different energy market scenarios.

Weighted Maximum-a-Posteriori Estimation in Tests Composed of Dichotomous and Polytomous Items

ERIC Educational Resources Information Center

Sun, Shan-Shan; Tao, Jian; Chang, Hua-Hua; Shi, Ning-Zhong

2012-01-01

For mixed-type tests composed of dichotomous and polytomous items, polytomous items often yield more information than dichotomous items. To reflect the difference between the two types of items and to improve the precision of ability estimation, an adaptive weighted maximum-a-posteriori (WMAP) estimation is proposed. To evaluate the performance of…

Applying a Weighted Maximum Likelihood Latent Trait Estimator to the Generalized Partial Credit Model

ERIC Educational Resources Information Center

Penfield, Randall D.; Bergeron, Jennifer M.

2005-01-01

This article applies a weighted maximum likelihood (WML) latent trait estimator to the generalized partial credit model (GPCM). The relevant equations required to obtain the WML estimator using the Newton-Raphson algorithm are presented, and a simulation study is described that compared the properties of the WML estimator to those of the maximum…

17 CFR 33.3 - Unlawful commodity option transactions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Unlawful commodity option... REGULATION OF DOMESTIC EXCHANGE-TRADED COMMODITY OPTION TRANSACTIONS § 33.3 Unlawful commodity option... of, or maintain a position in, any commodity option transaction subject to the provisions of this...

49 CFR 1248.100 - Commodity classification designated.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 9 2011-10-01 2011-10-01 false Commodity classification designated. 1248.100... STATISTICS Commodity Code § 1248.100 Commodity classification designated. Commencing with reports for the..., reports of commodity statistics required to be made to the Board, shall be based on the commodity codes...

17 CFR 33.10 - Fraud in connection with commodity option transactions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Fraud in connection with commodity option transactions. 33.10 Section 33.10 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF DOMESTIC EXCHANGE-TRADED COMMODITY OPTION TRANSACTIONS § 33.10 Fraud in...

17 CFR 32.11 - Suspension of commodity option transactions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Suspension of commodity option... REGULATION OF COMMODITY OPTION TRANSACTIONS § 32.11 Suspension of commodity option transactions. (a... accept money, securities or property in connection with, the purchase or sale of any commodity option, or...

7 CFR 65.135 - Covered commodity.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., PEANUTS, AND GINSENG General Provisions Definitions § 65.135 Covered commodity. (a) Covered commodity... nuts; (6) Pecans; and (7) Ginseng. (b) Covered commodities are excluded from this part if the commodity...

7 CFR 65.135 - Covered commodity.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., PEANUTS, AND GINSENG General Provisions Definitions § 65.135 Covered commodity. (a) Covered commodity... nuts; (6) Pecans; and (7) Ginseng. (b) Covered commodities are excluded from this part if the commodity...

7 CFR 65.135 - Covered commodity.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., PEANUTS, AND GINSENG General Provisions Definitions § 65.135 Covered commodity. (a) Covered commodity... nuts; (6) Pecans; and (7) Ginseng. (b) Covered commodities are excluded from this part if the commodity...

7 CFR 65.135 - Covered commodity.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., PEANUTS, AND GINSENG General Provisions Definitions § 65.135 Covered commodity. (a) Covered commodity... nuts; (6) Pecans; and (7) Ginseng. (b) Covered commodities are excluded from this part if the commodity...

Alternative Fuels Data Center

Science.gov Websites

Natural Gas Vehicle (NGV) Weight Exemption A NGV may exceed the state's gross vehicle weight limits maximum gross weight may not exceed 82,000 pounds. (Reference Senate Bill 3616, 2018)

Temperature and molecular-weight dependences of acoustic behaviors of polystyrene studied using Brillouin spectroscopy

NASA Astrophysics Data System (ADS)

Oh, Soo Han; Lee, Byoung Wan; Ko, Jae-Hyeon; Lee, Hyeonju; Park, Jaehoon; Ko, Young Ho; Kim, Kwang Joo

2017-04-01

The acoustic properties of three polystyrene polymers with different molecular weights were investigated as a function of temperature by using Brillouin light scattering. The longitudinal sound velocity showed a change in the slope, which depended on the molecular weight, at the glass transition temperature. The absorption coefficient exhibited a maximum above the glass transition temperature, and the maximum temperature became higher as the molecular weight was increased. Comparison with previous acoustic studies on polystyrene indicate that a substantial frequency dispersion caused by strong coupling between the longitudinal acoustic waves and the segmental motions exists in the high-temperature range.

17 CFR 4.6 - Exclusion for certain otherwise regulated persons from the definition of the term “commodity...

Code of Federal Regulations, 2011 CFR

2011-04-01

... otherwise regulated persons from the definition of the term âcommodity trading advisor.â 4.6 Section 4.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS General Provisions, Definitions and Exemptions § 4.6 Exclusion for certain...

17 CFR 33.4 - Designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2011 CFR

2011-04-01

... market for the trading of commodity options. 33.4 Section 33.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF DOMESTIC EXCHANGE-TRADED COMMODITY OPTION TRANSACTIONS § 33.4 Designation as a contract market for the trading of commodity options. The Commission may...

17 CFR 4.6 - Exclusion for certain otherwise regulated persons from the definition of the term “commodity...

Code of Federal Regulations, 2014 CFR

2014-04-01

... otherwise regulated persons from the definition of the term âcommodity trading advisor.â 4.6 Section 4.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS General Provisions, Definitions and Exemptions § 4.6 Exclusion for certain...

17 CFR 4.6 - Exclusion for certain otherwise regulated persons from the definition of the term “commodity...

Code of Federal Regulations, 2013 CFR

2013-04-01

... otherwise regulated persons from the definition of the term âcommodity trading advisor.â 4.6 Section 4.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS General Provisions, Definitions and Exemptions § 4.6 Exclusion for certain...

17 CFR 33.4 - Designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2012 CFR

2012-04-01

... market for the trading of commodity options. 33.4 Section 33.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF DOMESTIC EXCHANGE-TRADED COMMODITY OPTION TRANSACTIONS § 33.4 Designation as a contract market for the trading of commodity options. The Commission may...

17 CFR 4.6 - Exclusion for certain otherwise regulated persons from the definition of the term “commodity...

Code of Federal Regulations, 2012 CFR

2012-04-01

... otherwise regulated persons from the definition of the term âcommodity trading advisor.â 4.6 Section 4.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS General Provisions, Definitions and Exemptions § 4.6 Exclusion for certain...

17 CFR 4.6 - Exclusion for certain otherwise regulated persons from the definition of the term “commodity...

Code of Federal Regulations, 2010 CFR

2010-04-01

... otherwise regulated persons from the definition of the term âcommodity trading advisor.â 4.6 Section 4.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS General Provisions, Definitions and Exemptions § 4.6 Exclusion for certain...

Stress analysis on passenger deck due to modification from passenger ship to vehicle-carrying ship

NASA Astrophysics Data System (ADS)

Zubaydi, A.; Sujiatanti, S. H.; Hariyanto, T. R.

2018-03-01

Stress is a basic concept in learning about material mechanism. The main focus that needs to be brought to attention in analyzing stress is strength, which is the structural capacity to carry or distribute loads. The structural capacity not only measured by comparing the maximum stress with the material’s yield strength but also with the permissible stress required by the Indonesian Classification Bureau (BKI), which certainly makes it much safer. This final project analyzes stress in passenger deck that experiences modification due to load changes, from passenger load to vehicle one, carrying: 6-wheels truck with maximum weight of 14 tons, a passenger car with maximum weight of 3.5 tons, and a motorcycle with maximum weight of 0.4 tons. The deck structure is modelled using finite element software. The boundary conditions given to the structural model are fix and simple constraint. The load that works on this deck is the deck load which comes from the vehicles on deck with three vehicles’ arrangement plans. After that, software modelling is conducted for analysis purpose. Analysis result shows a variation of maximum stress that occurs i.e. 135 N/mm2, 133 N/mm2, and 152 N/mm2. Those maximum stresses will not affect the structure of passenger deck’s because the maximum stress that occurs indicates smaller value compared to the Indonesian Classification Bureau’s permissible stress (175 N/mm2) as well as the material’s yield strength (235 N/mm2). Thus, the structural strength of passenger deck is shown to be capable of carrying the weight of vehicles in accordance with the three vehicles’ arrangement plans.

Lod scores for gene mapping in the presence of marker map uncertainty.

PubMed

Stringham, H M; Boehnke, M

2001-07-01

Multipoint lod scores are typically calculated for a grid of locus positions, moving the putative disease locus across a fixed map of genetic markers. Changing the order of a set of markers and/or the distances between the markers can make a substantial difference in the resulting lod score curve and the location and height of its maximum. The typical approach of using the best maximum likelihood marker map is not easily justified if other marker orders are nearly as likely and give substantially different lod score curves. To deal with this problem, we propose three weighted multipoint lod score statistics that make use of information from all plausible marker orders. In each of these statistics, the information conditional on a particular marker order is included in a weighted sum, with weight equal to the posterior probability of that order. We evaluate the type 1 error rate and power of these three statistics on the basis of results from simulated data, and compare these results to those obtained using the best maximum likelihood map and the map with the true marker order. We find that the lod score based on a weighted sum of maximum likelihoods improves on using only the best maximum likelihood map, having a type 1 error rate and power closest to that of using the true marker order in the simulation scenarios we considered. Copyright 2001 Wiley-Liss, Inc.

17 CFR 33.5 - Application for designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2011 CFR

2011-04-01

... a contract market for the trading of commodity options. 33.5 Section 33.5 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF DOMESTIC EXCHANGE-TRADED COMMODITY OPTION TRANSACTIONS § 33.5 Application for designation as a contract market for the trading of commodity options. (a...

17 CFR 37.4 - Election to trade excluded and exempt commodities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Election to trade excluded and exempt commodities. 37.4 Section 37.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DERIVATIVES TRANSACTION EXECUTION FACILITIES § 37.4 Election to trade excluded and exempt commodities. A board of trade that is or elects...

17 CFR 33.5 - Application for designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2013 CFR

2013-04-01

... a contract market for the trading of commodity options. 33.5 Section 33.5 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION TRANSACTIONS THAT ARE OPTIONS... contract market for the trading of commodity options. (a) Any board of trade desiring to be designated as a...

17 CFR 33.5 - Application for designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2012 CFR

2012-04-01

... a contract market for the trading of commodity options. 33.5 Section 33.5 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF DOMESTIC EXCHANGE-TRADED COMMODITY OPTION TRANSACTIONS § 33.5 Application for designation as a contract market for the trading of commodity options. (a...

17 CFR 33.6 - Suspension or revocation of designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2013 CFR

2013-04-01

... designation as a contract market for the trading of commodity options. 33.6 Section 33.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION TRANSACTIONS THAT... designation as a contract market for the trading of commodity options. The Commission may, after notice and...

17 CFR 33.4 - Designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2013 CFR

2013-04-01

... market for the trading of commodity options. 33.4 Section 33.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION TRANSACTIONS THAT ARE OPTIONS ON CONTRACTS OF SALE OF A COMMODITY FOR FUTURE DELIVERY § 33.4 Designation as a contract market for the trading...

17 CFR 33.5 - Application for designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2010 CFR

2010-04-01

... a contract market for the trading of commodity options. 33.5 Section 33.5 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF DOMESTIC EXCHANGE-TRADED COMMODITY OPTION TRANSACTIONS § 33.5 Application for designation as a contract market for the trading of commodity options. (a...

17 CFR 210.4-08 - General notes to financial statements.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., options, and other financial instruments with similar characteristics. (ii) Derivative commodity... futures, commodity forwards, commodity swaps, commodity options, and other commodity instruments with... policies for certain derivative instruments. Disclosures regarding accounting policies shall include...

High-efficiency space-based software radio architectures & algorithms (a minimum size, weight, and power TeraOps processor)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunham, Mark Edward; Baker, Zachary K; Stettler, Matthew W

2009-01-01

Los Alamos has recently completed the latest in a series of Reconfigurable Software Radios, which incorporates several key innovations in both hardware design and algorithms. Due to our focus on satellite applications, each design must extract the best size, weight, and power performance possible from the ensemble of Commodity Off-the-Shelf (COTS) parts available at the time of design. In this case we have achieved 1 TeraOps/second signal processing on a 1920 Megabit/second datastream, while using only 53 Watts mains power, 5.5 kg, and 3 liters. This processing capability enables very advanced algorithms such as our wideband RF compression scheme tomore » operate remotely, allowing network bandwidth constrained applications to deliver previously unattainable performance.« less

Alternatives to Weight Tolerance Permits

DOT National Transportation Integrated Search

2000-10-01

A complex web of government regulations in the United States establishes maximum weights for vehicles on public roads. The primary purpose is to ensure compatibility of roadway design and operations with vehicle weight and dimensions. Of particular c...

33 CFR 183.41 - Persons capacity: Outboard boats.

Code of Federal Regulations, 2010 CFR

2010-07-01

... § 183.35 for the boat minus the motor and control weight, battery weight (dry), and full portable fuel... control weight, battery weight, and full portable fuel tank weight, if any, shown in table 4 of subpart H of this part for the maximum horsepower capacity marked on the boat. Permanently installed fuel tanks...

Limits and regulations for mycotoxins in food and feed.

PubMed

Zmudzki, J; Wiśniewska-Dmytrow, H

2004-01-01

Mycotoxins are natural contaminants whose presence in food- and feedstuffs cannot be completely avoided. Since several mycotoxins have been associated with and implicated in human and animal diseases there is a need to establish maximum levels, guidelines or action levels for them in some kinds of commodities. International and government authorities in many countries have been investing in mycotoxins research and initiating administrative actions for elaboration of legislation and implementing regulatory measures for the control of mycotoxins. Codex Alimentarius Commission is established international legislation on food and feed. In European Union specific limits and regulations for mycotoxins and other contaminants are constructed under the general Codex standards and based on proposal from European Commission. The legal basis for European Commission became available with the framework Council Regulation (EEC) No 315/93. In this paper, legislation regarding maximum levels for certain mycotoxins in food- and feedstuffs in European Community and other countries were reviewed and discussed.

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2014 CFR

2014-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2013 CFR

2013-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2012 CFR

2012-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2010 CFR

2010-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

33 CFR 183.37 - Maximum weight capacity: Boats rated for manual propulsion and boats rated for outboard motors of...

Code of Federal Regulations, 2011 CFR

2011-07-01

... rated for manual propulsion and boats rated for outboard motors of 2 horsepower or less. 183.37 Section... for manual propulsion and boats rated for outboard motors of 2 horsepower or less. (a) The maximum weight capacity marked on a boat that is rated for manual propulsion or for motors of 2 horsepower or...

[Research progress on standards of commodity classes of Chinese materia medica and discussion on several key problems].

PubMed

Yang, Guang; Zeng, Yan; Guo, Lan-Ping; Huang, Lu-Qi; Jin, Yan; Zheng, Yu-Guang; Wang, Yong-Yan

2014-05-01

Standards of commodity classes of Chinese materia medica is an important way to solve the "Lemons Problem" of traditional Chinese medicine market. Standards of commodity classes are also helpful to rebuild market mechanisms for "high price for good quality". The previous edition of commodity classes standards of Chinese materia medica was made 30 years ago. It is no longer adapted to the market demand. This article researched progress on standards of commodity classes of Chinese materia medica. It considered that biological activity is a better choice than chemical constituents for standards of commodity classes of Chinese materia medica. It is also considered that the key point to set standards of commodity classes is finding the influencing factors between "good quality" and "bad quality". The article also discussed the range of commodity classes of Chinese materia medica, and how to coordinate standards of pharmacopoeia and commodity classes. According to different demands, diversiform standards can be used in commodity classes of Chinese materia medica, but efficacy is considered the most important index of commodity standard. Decoction pieces can be included in standards of commodity classes of Chinese materia medica. The authors also formulated the standards of commodity classes of Notoginseng Radix as an example, and hope this study can make a positive and promotion effect on traditional Chinese medicine market related research.

Quantitative LC-MS of polymers: determining accurate molecular weight distributions by combined size exclusion chromatography and electrospray mass spectrometry with maximum entropy data processing.

PubMed

Gruendling, Till; Guilhaus, Michael; Barner-Kowollik, Christopher

2008-09-15

We report on the successful application of size exclusion chromatography (SEC) combined with electrospray ionization mass spectrometry (ESI-MS) and refractive index (RI) detection for the determination of accurate molecular weight distributions of synthetic polymers, corrected for chromatographic band broadening. The presented method makes use of the ability of ESI-MS to accurately depict the peak profiles and retention volumes of individual oligomers eluting from the SEC column, whereas quantitative information on the absolute concentration of oligomers is obtained from the RI-detector only. A sophisticated computational algorithm based on the maximum entropy principle is used to process the data gained by both detectors, yielding an accurate molecular weight distribution, corrected for chromatographic band broadening. Poly(methyl methacrylate) standards with molecular weights up to 10 kDa serve as model compounds. Molecular weight distributions (MWDs) obtained by the maximum entropy procedure are compared to MWDs, which were calculated by a conventional calibration of the SEC-retention time axis with peak retention data obtained from the mass spectrometer. Comparison showed that for the employed chromatographic system, distributions below 7 kDa were only weakly influenced by chromatographic band broadening. However, the maximum entropy algorithm could successfully correct the MWD of a 10 kDa standard for band broadening effects. Molecular weight averages were between 5 and 14% lower than the manufacturer stated data obtained by classical means of calibration. The presented method demonstrates a consistent approach for analyzing data obtained by coupling mass spectrometric detectors and concentration sensitive detectors to polymer liquid chromatography.

17 CFR 32.5 - Disclosure.

Code of Federal Regulations, 2010 CFR

2010-04-01

... effect of any foreign currency fluctuations with respect to commodity option transactions which are to be... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Disclosure. 32.5 Section 32.5 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION...

17 CFR 31.6 - Registration of leverage commodities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... commodities. 31.6 Section 31.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION... applied to the National Futures Association for registration as a leverage transaction merchant; (2... the spot, forward, and futures markets for the generic commodity; (3) Specify a commercial or retail...

7 CFR 250.57 - Commodity schools.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 4 2011-01-01 2011-01-01 false Commodity schools. 250.57 Section 250.57 Agriculture... TERRITORIES AND POSSESSIONS AND AREAS UNDER ITS JURISDICTION National School Lunch Program (NSLP) and Other Child Nutrition Programs § 250.57 Commodity schools. (a) Categorization of commodity schools. Commodity...

7 CFR 250.57 - Commodity schools.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false Commodity schools. 250.57 Section 250.57 Agriculture... TERRITORIES AND POSSESSIONS AND AREAS UNDER ITS JURISDICTION National School Lunch Program (NSLP) and Other Child Nutrition Programs § 250.57 Commodity schools. (a) Categorization of commodity schools. Commodity...

Growth of the eye lens: II. Allometric studies.

PubMed

Augusteyn, Robert C

2014-01-01

The purpose of this study was to examine the ontogeny and phylogeny of lens growth in a variety of species using allometry. Data on the accumulation of wet and/or dry lens weight as a function of bodyweight were obtained for 40 species and subjected to allometric analysis to examine ontogenic growth and compaction. Allometric analysis was also used to compare the maximum adult lens weights for 147 species with the maximum adult bodyweight and to compare lens volumes calculated from wet and dry weights with eye volumes calculated from axial length. Linear allometric relationships were obtained for the comparison of ontogenic lens and bodyweight accumulation. The body mass exponent (BME) decreased with increasing animal size from around 1.0 in small rodents to 0.4 in large ungulates for both wet and dry weights. Compaction constants for the ontogenic growth ranged from 1.00 in birds and reptiles up to 1.30 in mammals. Allometric comparison of maximum lens wet and dry weights with maximum bodyweights also yielded linear plots with a BME of 0.504 for all warm blooded species except primates which had a BME of 0.25. When lens volumes were compared with eye volumes, all species yielded a scaling constant of 0.75 but the proportionality constants for primates and birds were lower. Ontogenic lens growth is fastest, relative to body growth, in small animals and slowest in large animals. Fiber cell compaction takes place throughout life in most species, but not in birds and reptiles. Maximum adult lens size scales with eye size with the same exponent in all species, but birds and primates have smaller lenses relative to eye size than other species. Optical properties of the lens are generated through the combination of variations in the rate of growth, rate of compaction, shape and size.

17 CFR 14.4 - Violation of Commodity Exchange Act.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Violation of Commodity Exchange Act. 14.4 Section 14.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION... Exchange Act. The Commission may deny, temporarily or permanently, the privilege of appearing or practicing...

17 CFR 3.10 - Registration of futures commission merchants, retail foreign exchange dealers, introducing...

Code of Federal Regulations, 2011 CFR

2011-04-01

..., commodity pool operators and leverage transaction merchants. 3.10 Section 3.10 Commodity and Securities..., commodity pool operators and leverage transaction merchants. (a) Application for registration. (1)(i) Except... merchant, retail foreign exchange dealers, introducing broker, commodity trading advisor, commodity pool...

29 CFR 780.114 - Wild commodities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Agricultural Or Horticultural Commodities § 780.114 Wild commodities. Employees engaged in the gathering or harvesting of wild commodities such as mosses, wild rice, burls and laurel plants, the trapping of wild... 29 Labor 3 2013-07-01 2013-07-01 false Wild commodities. 780.114 Section 780.114 Labor Regulations...

29 CFR 780.114 - Wild commodities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Agricultural Or Horticultural Commodities § 780.114 Wild commodities. Employees engaged in the gathering or harvesting of wild commodities such as mosses, wild rice, burls and laurel plants, the trapping of wild... 29 Labor 3 2011-07-01 2011-07-01 false Wild commodities. 780.114 Section 780.114 Labor Regulations...

29 CFR 780.114 - Wild commodities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Agricultural Or Horticultural Commodities § 780.114 Wild commodities. Employees engaged in the gathering or harvesting of wild commodities such as mosses, wild rice, burls and laurel plants, the trapping of wild... 29 Labor 3 2014-07-01 2014-07-01 false Wild commodities. 780.114 Section 780.114 Labor Regulations...

29 CFR 780.114 - Wild commodities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Agricultural Or Horticultural Commodities § 780.114 Wild commodities. Employees engaged in the gathering or harvesting of wild commodities such as mosses, wild rice, burls and laurel plants, the trapping of wild... 29 Labor 3 2010-07-01 2010-07-01 false Wild commodities. 780.114 Section 780.114 Labor Regulations...

29 CFR 780.114 - Wild commodities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Agricultural Or Horticultural Commodities § 780.114 Wild commodities. Employees engaged in the gathering or harvesting of wild commodities such as mosses, wild rice, burls and laurel plants, the trapping of wild... 29 Labor 3 2012-07-01 2012-07-01 false Wild commodities. 780.114 Section 780.114 Labor Regulations...

17 CFR 37.3 - Requirements for underlying commodities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 5a(b)(3) of the Act, may trade any contract of sale of a commodity for future delivery (or option on... that are a security futures product, and the registered derivatives transaction execution facility is a... commodities. 37.3 Section 37.3 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION...

17 CFR 4.32 - Trading on a Registered Derivatives Transaction Execution Facility for Non-Institutional Customers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Trading on a Registered... Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS Commodity Trading Advisors § 4.32 Trading on a Registered Derivatives Transaction Execution...

17 CFR 32.3 - Unlawful commodity option transactions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Unlawful commodity option... REGULATION OF COMMODITY OPTION TRANSACTIONS § 32.3 Unlawful commodity option transactions. (a) On and after... extend credit in lieu thereof) from an option customer as payment of the purchase price in connection...

17 CFR 37.4 - Election to trade excluded and exempt commodities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Election to trade excluded and exempt commodities. 37.4 Section 37.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DERIVATIVES TRANSACTION EXECUTION FACILITIES § 37.4 Election to trade excluded and exempt...

17 CFR 4.32 - Trading on a Registered Derivatives Transaction Execution Facility for Non-Institutional Customers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false Trading on a Registered... Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS Commodity Trading Advisors § 4.32 Trading on a Registered Derivatives Transaction Execution...

49 CFR 1248.100 - Commodity classification designated.

Code of Federal Regulations, 2010 CFR

2010-10-01

... STATISTICS Commodity Code § 1248.100 Commodity classification designated. Commencing with reports for the..., reports of commodity statistics required to be made to the Board, shall be based on the commodity codes... Statistics, 1963, issued by the Bureau of the Budget, and on additional codes 411 through 462 shown in § 1248...

Multiple commodities in statistical microeconomics: Model and market

NASA Astrophysics Data System (ADS)

Baaquie, Belal E.; Yu, Miao; Du, Xin

2016-11-01

A statistical generalization of microeconomics has been made in Baaquie (2013). In Baaquie et al. (2015), the market behavior of single commodities was analyzed and it was shown that market data provides strong support for the statistical microeconomic description of commodity prices. The case of multiple commodities is studied and a parsimonious generalization of the single commodity model is made for the multiple commodities case. Market data shows that the generalization can accurately model the simultaneous correlation functions of up to four commodities. To accurately model five or more commodities, further terms have to be included in the model. This study shows that the statistical microeconomics approach is a comprehensive and complete formulation of microeconomics, and which is independent to the mainstream formulation of microeconomics.

The Influence Of Highway Transportation Infrastructure Condition Toward Commodity Production Generation for The Resilience Needs at Regional Internal Zone

NASA Astrophysics Data System (ADS)

Akbardin, Juang; Parikesit, Danang; Riyanto, Bambang; Mulyono, Agus Taufik

2018-02-01

The poultry commodity consumption and requirement is one of the main commodities that must be fulfilled in a region to maintain the availability of meat from poultry. Poultry commodity production is one of the production sectors that have a clean environment resistance. An increasing of poultry commodity generation production requires a smooth distribution to arrive at the processing. The livestock location as a commodity production is placed at a considerable far distance from residential and market locations. Zones that have poultry commodity production have an excess potential to supply other zones that are lacking in production to the consumption of these commodities. The condition of highway transportation infrastructure that is very diverse with the damage level availability in a zone has an influence in the supply and demand of poultry commodity requirement in the regional internal of Central Java province. In order to know the effect of highway transportation infrastructure condition toward the poultry commodity movement, demography factor and availability of freight vehicles will be reviewed to estimate the amount of poultry commodity movement generation production. Thus the poultry commodity consumption requirement that located in the internal - regional zone of central java province can be adequated from the zone. So it can be minimized the negative impacts that affect the environment at the zone in terms of comparison of the movement attraction and generation production at poultry commodity in Central Java.

Analysis of commode grab bar usage for the monitoring of older adults in the smart home environment.

PubMed

Arcelus, Amaya; Holtzman, Megan; Goubran, Rafik; Sveistrup, Heidi; Guitard, Paulette; Knoefel, Frank

2009-01-01

The occurrence of falls inside the home is a common yet potentially hazardous issue for adults as they age. Even with the installation of physical aids such as grab bars, weight transfers on and off a toilet or bathtub can become increasingly difficult as a person's level of physical mobility and sense of balance deteriorate. Detecting this deterioration becomes an important goal in fall prevention within a smart home. This paper develops an unobtrusive method of analyzing the usage of toilet grab bars using pressure sensors embedded into the arm rests of a commode. Clinical parameters are successfully extracted automatically from a series of stand-to-sit (StSi) and sit-to-stand (SiSt) transfers performed by a trial group of young and older adults. A preliminary comparison of the parameters indicates differences between the two groups, and aligns well with published characteristics obtained using accelerometers worn on the body. The unobtrusive nature of this method provides a useful tool to be incorporated into a system of continuous monitoring of older adults within the smart home environment.

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2012 CFR

2012-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2011 CFR

2011-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

33 CFR 183.105 - Quantity of flotation required.

Code of Federal Regulations, 2013 CFR

2013-07-01

... of the dead weight; and (3) A weight in pounds that, when submerged, equals 62.4 times the volume in... of this section, “dead weight” means the maximum weight capacity marked on the boat minus the persons...

Performance Analysis of IEEE 802.11g TCM Waveforms Transmitted over a Channel with Pulse-Noise Interference

DTIC Science & Technology

2007-06-01

17 Table 2. Best (maximum free distance) rate r=2/3 punctured convolutional code ...Hamming distance between all pairs of non-zero paths. Table 2 lists the best rate r=2/3, punctured convolutional code information weight structure dB...Table 2. Best (maximum free distance) rate r=2/3 punctured convolutional code information weight structure. (From: [12]). K freed freeB

On the Performance of Maximum Likelihood versus Means and Variance Adjusted Weighted Least Squares Estimation in CFA

ERIC Educational Resources Information Center

Beauducel, Andre; Herzberg, Philipp Yorck

2006-01-01

This simulation study compared maximum likelihood (ML) estimation with weighted least squares means and variance adjusted (WLSMV) estimation. The study was based on confirmatory factor analyses with 1, 2, 4, and 8 factors, based on 250, 500, 750, and 1,000 cases, and on 5, 10, 20, and 40 variables with 2, 3, 4, 5, and 6 categories. There was no…

Polymer-surfactant complex formation and its effect on turbulent wall shear stress.

PubMed

Suksamranchit, Siriluck; Sirivat, Anuvat; Jamieson, Alexander M

2006-02-01

Turbulent drag reduction in Couette flow was investigated in terms of a decrease in wall shear stress for aqueous solutions of a nonionic polymer, poly(ethylene oxide) (PEO), a cationic surfactant, hexadecyltrimethylammonium chloride (HTAC), and their mixtures. Consistent with literature data, drag reduction was observed for PEO solutions above a critical molecular weight, 0.91 x 10(5) < Mc < 3.04 x 10(5) g/mol. Maximum drag reduction occurred at an optimum concentration, c(PEO)*, which scales inversely with molecular weight, and the % maximum drag reduction increases with molecular weight. For aqueous HTAC solutions, wall shear stress decreased with increasing HTAC concentration and leveled off at an optimum concentration, c(HTAC)*, comparable to the critical micelle concentration. For HTAC/PEO mixtures, the critical PEO molecular weight for drag reduction decreases, interpreted as due to an increase in hydrodynamic volume because of binding of HTAC micelles to PEO. Consistent with this interpretation, at fixed PEO concentration, maximum drag reduction was observed at an optimum HTAC concentration, c(HTAC/PEO)*, comparable to the maximum binding concentration, MBC. Also, with HTAC concentration fixed at the MBC, the optimum PEO concentration for drag reduction, c(PEO/HTAC)*, decreases relative to that, c(PEO)*, in the absence of HTAC.

Commodes: inconvenient conveniences.

PubMed

Naylor, J R; Mulley, G P

1993-11-13

To investigate use of commodes and attitudes of users and carers to them. Interview with semi-structured questionnaire of subjects supplied with commodes from Leeds community appliance centre. 140 users of a commode and 105 of their carers. Main reasons for being supplied with a commode were impaired mobility (130 subjects), difficulty in climbing stairs (128), and urinary incontinence (127). Main concerns of users and carers were lack of privacy (120 subjects felt embarrassed about using their commode, and 96 would not use it if someone was present); unpleasant smells (especially for 20 subjects who were confined to one room); physical appearance of commode chair (101 users said it had an unfavourable appearance, and 44 had tried to disguise it); and lack of follow up after commode was supplied (only 15 users and carers knew who to contact if there were problems). Users generally either had very positive or very negative attitudes to their commodes but most carers viewed them very negatively, especially with regard to cleaning them. Health professionals should be aware of people's need for privacy when advising them where to keep their commode. A standard commode is inappropriate for people confined to one room, and alternatives such as a chemical toilet should be considered. Regular follow up is needed to identify any problems such as uncomfortable or unsafe chairs. More thought should be given to the appearance of commodes in their design.

75 FR 67794 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Order Granting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-03

... commodities or commodity futures, options on commodities, or other commodity derivatives or Commodity-Based... options or other derivatives on any of the foregoing; or (b) interest rate futures or options or... derivatives on any of the foregoing; or (b) interest rate futures or options or derivatives on the foregoing...

17 CFR 15.00 - Definitions of terms used in parts 15 to 21 of this chapter.

Code of Federal Regulations, 2010 CFR

2010-04-01

... commodity, means the actual commodity as distinguished from a futures or options contract in such commodity... for future delivery or commodity option transactions, or for effecting settlements of contracts for future delivery or commodity option transactions, for and between members of any designated contract...

75 FR 71762 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... commodities or commodity futures, options on commodities, or other commodity derivatives or Commodity-Based...) interest rate futures or options or derivatives on the foregoing in this subparagraph (b) (``Futures... options or other derivatives on any of the foregoing; or (b) interest rate futures or options or...

17 CFR 4.14 - Exemption from registration as a commodity trading advisor.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS General Provisions, Definitions... commodity pool operator and the person's commodity trading advice is directed solely to, and for the sole use of, the pool or pools for which it is so registered; (5) It is exempt from registration as a...

17 CFR Appendix B to Part 43 - Enumerated Physical Commodity Contracts and Other Contracts

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false Enumerated Physical Commodity... TRADING COMMISSION REAL-TIME PUBLIC REPORTING Pt. 43, App. B Appendix B to Part 43—Enumerated Physical Commodity Contracts and Other Contracts Enumerated Physical Commodity Contracts Agriculture ICE Futures U.S...

17 CFR 32.13 - Exemption from prohibition of commodity option transactions for trade options on certain...

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false Exemption from prohibition of... Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION... are met at the time of the solicitation or acceptance: (1) That person is registered with the...

17 CFR 4.32 - Trading on a Registered Derivatives Transaction Execution Facility for Non-Institutional Customers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Trading on a Registered Derivatives Transaction Execution Facility for Non-Institutional Customers. 4.32 Section 4.32 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING...

Weight History, All-Cause and Cause-Specific Mortality in Three Prospective Cohort Studies

PubMed Central

Yu, Edward; Stokes, Andrew C.; Ley, Sylvia H.; Manson, JoAnn E.; Willett, Walter; Satija, Ambika; Hu, Frank B.

2017-01-01

BACKGROUND The relationship between body mass index (BMI) and mortality remains controversial. OBJECTIVE To investigate the relationship between maximum BMI over 16 years and subsequent mortality. DESIGN Three prospective cohort studies. SETTING Nurses’ Health Study I and II, Health Professionals Follow-up Study. PARTICIPANTS 225,072 men and women accruing 32,571 deaths over a mean of 12.3 years of follow-up. MEASUREMENTS Maximum BMI over 16 years of weight history and all-cause and cause-specific mortality. RESULTS Maximum BMIs in the overweight (25.0 to 29.9 kg/m2) (multivariate hazard ratio (HR), 1.06; 95% confidence interval (CI), 1.03 – 1.08), obese I (30.0 to 34.9 kg/m2), (HR, 1.24; 95% CI, 1.20 – 1.29), and obese II (≥ 35.0 kg/m2) (HR, 1.73; 95% CI, 1.66 – 1.80) categories were associated with increases in risk of all-cause mortality. The pattern of excess risk with a maximum BMI above normal weight was maintained across strata defined by smoking status, sex, and age, but the excess was greatest among those <70 years old and never smokers. In contrast, a significant inverse association between overweight and mortality (HR, 0.96; 95% CI, 0.94 – 0.99) was observed when BMI was defined using a single baseline measurement. Maximum overweight was also associated with increased cause-specific mortality, including deaths from cardiovascular diseases and coronary heart disease. LIMITATIONS Residual confounding and misclassification. CONCLUSIONS The paradoxical association between overweight and mortality is reversed in analyses incorporating weight history. Maximum BMI may be a useful metric to minimize reverse causation bias associated with a single baseline BMI assessment. PMID:28384755

Kinetic market models with single commodity having price fluctuations

NASA Astrophysics Data System (ADS)

Chatterjee, A.; Chakrabarti, B. K.

2006-12-01

We study here numerically the behavior of an ideal gas like model of markets having only one non-consumable commodity. We investigate the behavior of the steady-state distributions of money, commodity and total wealth, as the dynamics of trading or exchange of money and commodity proceeds, with local (in time) fluctuations in the price of the commodity. These distributions are studied in markets with agents having uniform and random saving factors. The self-organizing features in money distribution are similar to the cases without any commodity (or with consumable commodities), while the commodity distribution shows an exponential decay. The wealth distribution shows interesting behavior: gamma like distribution for uniform saving propensity and has the same power-law tail, as that of the money distribution, for a market with agents having random saving propensity.

Tailored composite wings with elastically produced chordwise camber

NASA Technical Reports Server (NTRS)

Rehfield, Lawrence W.; Chang, Stephen; Zischka, Peter J.; Pickings, Richard D.; Holl, Michael W.

1991-01-01

Four structural concepts were created which produce chordwise camber deformation that results in enhanced lift. A wing box can be tailored to utilize each of these with composites. In attempting to optimize the aerodynamic benefits, researchers found that there are two optimum designs that are of interest. There is a weight optimum which corresponds to the maximum lift per unit structural weight. There is also a lift optimum that corresponds to maximum absolute lift. Experience indicates that a large weight penalty accompanies the transition from weight to lift optimum designs. New structural models, the basic deformation mechanisms that are utilized, and typical analytical results are presented. It appears that lift enhancements of sufficient magnitude can be produced to render this type of wing tailoring of practical interest.

33 CFR 183.33 - Maximum weight capacity: Inboard and inboard-outdrive boats.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (iv) Weight of full permanent fuel tanks. (3) “Machinery weight” is the combined weight of installed engines or motors, control equipment, drive units, and batteries. [CGD 72-61R, 37 FR 15782, Aug. 4, 1972...

A Crosswalk of Mineral Commodity End Uses and North American Industry Classification System (NAICS) codes

USGS Publications Warehouse

Barry, James J.; Matos, Grecia R.; Menzie, W. David

2015-09-14

The links between the end uses of mineral commodities and the NAICS codes provide an instrument for analyzing the use of mineral commodities in the economy. The crosswalk is also a guide, highlighting those industrial sectors in the economy that rely heavily on mineral commodities. The distribution of mineral commodities across the economy is dynamic and does differ from year to year. This report reflects a snapshot of the state of the economy and mineral commodities in 2010.

17 CFR 1.19 - Prohibited trading in certain “puts” and “calls”.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Prohibited trading in certain âputsâ and âcallsâ. 1.19 Section 1.19 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Prohibited Trading in Commodity Options § 1...

17 CFR 33.6 - Suspension or revocation of designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2011 CFR

2011-04-01

... designation as a contract market for the trading of commodity options. 33.6 Section 33.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF DOMESTIC EXCHANGE-TRADED COMMODITY OPTION TRANSACTIONS § 33.6 Suspension or revocation of designation as a contract market for the trading...

17 CFR 1.19 - Prohibited trading in certain “puts” and “calls”.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 1 2014-04-01 2014-04-01 false Prohibited trading in certain âputsâ and âcallsâ. 1.19 Section 1.19 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Prohibited Trading in Commodity Options § 1...

17 CFR 33.6 - Suspension or revocation of designation as a contract market for the trading of commodity options.

Code of Federal Regulations, 2012 CFR

2012-04-01

... designation as a contract market for the trading of commodity options. 33.6 Section 33.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF DOMESTIC EXCHANGE-TRADED COMMODITY OPTION TRANSACTIONS § 33.6 Suspension or revocation of designation as a contract market for the trading...

17 CFR 1.19 - Prohibited trading in certain “puts” and “calls”.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false Prohibited trading in certain âputsâ and âcallsâ. 1.19 Section 1.19 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Prohibited Trading in Commodity Options § 1...

17 CFR 1.19 - Prohibited trading in certain “puts” and “calls”.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 1 2013-04-01 2013-04-01 false Prohibited trading in certain âputsâ and âcallsâ. 1.19 Section 1.19 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Prohibited Trading in Commodity Options § 1...

17 CFR 1.19 - Prohibited trading in certain “puts” and “calls”.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Prohibited trading in certain âputsâ and âcallsâ. 1.19 Section 1.19 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Prohibited Trading in Commodity Options § 1...

Alternative Fuels Data Center

Science.gov Websites

vehicles equipped with idle reduction technology may exceed the state's gross and axle weight limits by up vehicle primarily powered by natural gas may exceed the state's gross vehicle weight limits by a weight maximum gross weight may not exceed 82,000 lbs. (Reference New Mexico Statutes 66-7-4

Alternative Fuels Data Center

Science.gov Websites

vehicles equipped with idle reduction technology may exceed the state's gross and axle weight limits by up vehicle primarily powered by natural gas may exceed the state's gross vehicle weight limits by a weight and the weight of a comparable vehicle with a diesel tank and fueling system. The NGV maximum gross

7 CFR 1421.5 - Eligible commodities.

Code of Federal Regulations, 2010 CFR

2010-01-01

...)(1) To be an eligible commodity, the commodity must be merchantable for food, feed, or other uses... poisonous to humans or animals. A commodity containing vomitoxin, aflatoxin, or Aspergillus mold may not be...

7 CFR 1421.5 - Eligible commodities.

Code of Federal Regulations, 2011 CFR

2011-01-01

...)(1) To be an eligible commodity, the commodity must be merchantable for food, feed, or other uses... poisonous to humans or animals. A commodity containing vomitoxin, aflatoxin, or Aspergillus mold may not be...

Patterns of postnatal weight changes in infants with very low and extremely low birth weights.

PubMed

Smith, S L; Kirchhoff, K T; Chan, G M; Squire, S J

1994-01-01

To describe (1) short-term postnatal weight loss and gain patterns in infants with very low and extremely low birth weights and (2) the variables that may affect these weight change patterns. Descriptive, retrospective review. University hospital in the intermountain western United States. Sixty-two charts of infants admitted to a university neonatal intensive care unit from July 1990 through November 1992 were reviewed. Infants who weighed 1000 grams or less were categorized as extremely low birth weight (ELBW) and infants weighing 1001 to 1500 grams were categorized as very low birth weight (VLBW). Each group was comprised of 31 infants. Fifty percent of the sample were male, and 50% were female. Eighty-five percent of the sample were Anglo-American, and 15% were non-Anglo-American. Data were collected on a three-part data collection tool and included demographic and treatment variables. A significant difference was found in the maximum percent weight lost between the two groups, with the ELBW group losing a mean of 14.77% of birth weight and the VLBW group losing a mean of 11.35% of birth weight (t = 2.45, p < 0.05). The day the infants reached their nadir weight was significantly different between the two groups. The ELBW group reached their nadir on day of life 7, and the VLBW group reached their nadir on day of life 6 (t = 2.00, p < 0.05). No significant difference was noted in the time to return to birth weight between the two groups, with a mean of 15 days to return to birth weight. Factors associated with postnatal weight changes were intraventricular hemorrhage, use of diuretics and steroids, day of life when nadir weight occurred, and maximum percent of weight lost. Many of the independent variables were significantly interrelated to each other (r = -0.90 to r = 0.91, p < 0.01 to p < 0.001). However, only the variables that correlated with time to return to birth weight were entered into the regression analysis. These variables included number of days diuretics were given before return to birth weight, maximum percent of weight lost, and day of life the infants reached their nadir weight. Number of days diuretics were given before return to birth weight correlated significantly with time to return to birth weight (r = 0.77, F = 26.66, p < 0.0001) although maximum percent of weight lost and day of life the infants reached their nadir weight had a minimal effect. Further research into the effects of diuretic therapy on weight changes in this population of infants may lead to interventions to minimize the negative effects of diuretics on return to birth weight. In addition, the older growth charts may not be applicable to this population of infants. Generation of new growth charts that provide growth curves based on these data could be useful in developing nutritional therapies that would promote growth and possibly decrease the length of hospital stay for these infants.

Commonly Consumed Food Commodities

EPA Pesticide Factsheets

Commonly consumed foods are those ingested for their nutrient properties. Food commodities can be either raw agricultural commodities or processed commodities, provided that they are the forms that are sold or distributed for human consumption. Learn more.

76 FR 28641 - Commodity Pool Operators: Relief From Compliance With Certain Disclosure, Reporting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-18

... are subject to certain operational and advertising requirements under Part 4, to all other provisions... 4 Advertising, Brokers, Commodity futures, Commodity pool operators, Commodity trading advisors...

Commodes: inconvenient conveniences.

PubMed Central

Naylor, J R; Mulley, G P

1993-01-01

OBJECTIVES--To investigate use of commodes and attitudes of users and carers to them. DESIGN--Interview with semi-structured questionnaire of subjects supplied with commodes from Leeds community appliance centre. SUBJECTS--140 users of a commode and 105 of their carers. RESULTS--Main reasons for being supplied with a commode were impaired mobility (130 subjects), difficulty in climbing stairs (128), and urinary incontinence (127). Main concerns of users and carers were lack of privacy (120 subjects felt embarrassed about using their commode, and 96 would not use it if someone was present); unpleasant smells (especially for 20 subjects who were confined to one room); physical appearance of commode chair (101 users said it had an unfavourable appearance, and 44 had tried to disguise it); and lack of follow up after commode was supplied (only 15 users and carers knew who to contact if there were problems). Users generally either had very positive or very negative attitudes to their commodes but most carers viewed them very negatively, especially with regard to cleaning them. CONCLUSIONS--Health professionals should be aware of people's need for privacy when advising them where to keep their commode. A standard commode is inappropriate for people confined to one room, and alternatives such as a chemical toilet should be considered. Regular follow up is needed to identify any problems such as uncomfortable or unsafe chairs. More thought should be given to the appearance of commodes in their design. Images FIG 1 FIG 2 PMID:8281060

Maximum of the modulus of kernels in Gauss-Turan quadratures

NASA Astrophysics Data System (ADS)

Milovanovic, Gradimir V.; Spalevic, Miodrag M.; Pranic, Miroslav S.

2008-06-01

We study the kernels K_{n,s}(z) in the remainder terms R_{n,s}(f) of the Gauss-Turan quadrature formulae for analytic functions on elliptical contours with foci at pm 1 , when the weight omega is a generalized Chebyshev weight function. For the generalized Chebyshev weight of the first (third) kind, it is shown that the modulus of the kernel \\vert K_{n,s}(z)\\vert attains its maximum on the real axis (positive real semi-axis) for each ngeq n_0, n_0Dn_0(rho,s) . It was stated as a conjecture in [Mathematics of Computation 72 (2003), 1855-1872]. For the generalized Chebyshev weight of the second kind, in the case when the number of the nodes n in the corresponding Gauss-Turan quadrature formula is even, it is shown that the modulus of the kernel attains its maximum on the imaginary axis for each ngeq n_0, n_0Dn_0(rho,s) . Numerical examples are included. Retrieve articles in all Journals with MSC (1991): [41]41A55, [42]65D30, [43]65D32

75 FR 27338 - NASDAQ OMX Commodities Clearing-Contract Merchant LLC; NASDAQ OMX Commodities Clearing-Delivery...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket Nos. ER10-912-000; ER10-913-000; ER10-914-000] NASDAQ OMX Commodities Clearing--Contract Merchant LLC; NASDAQ OMX Commodities Clearing--Delivery LLC; NASDAQ OMX Commodities Clearing--Finance LLC; Notice of Filing May 6, 2010. Take notice that, on May 3, 2010, NASDAQ OMX Commoditie...

17 CFR Appendix C to Part 4 - Form CTA-PR

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 1 2014-04-01 2014-04-01 false Form CTA-PR C Appendix C to Part 4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS Pt. 4, App. C Appendix C to Part 4—Form CTA-PR ER24FE12.052 ER24FE12...

Multiple Interactive Pollutants in Water Quality Trading

NASA Astrophysics Data System (ADS)

Sarang, Amin; Lence, Barbara J.; Shamsai, Abolfazl

2008-10-01

Efficient environmental management calls for the consideration of multiple pollutants, for which two main types of transferable discharge permit (TDP) program have been described: separate permits that manage each pollutant individually in separate markets, with each permit based on the quantity of the pollutant or its environmental effects, and weighted-sum permits that aggregate several pollutants as a single commodity to be traded in a single market. In this paper, we perform a mathematical analysis of TDP programs for multiple pollutants that jointly affect the environment (i.e., interactive pollutants) and demonstrate the practicality of this approach for cost-efficient maintenance of river water quality. For interactive pollutants, the relative weighting factors are functions of the water quality impacts, marginal damage function, and marginal treatment costs at optimality. We derive the optimal set of weighting factors required by this approach for important scenarios for multiple interactive pollutants and propose using an analytical elasticity of substitution function to estimate damage functions for these scenarios. We evaluate the applicability of this approach using a hypothetical example that considers two interactive pollutants. We compare the weighted-sum permit approach for interactive pollutants with individual permit systems and TDP programs for multiple additive pollutants. We conclude by discussing practical considerations and implementation issues that result from the application of weighted-sum permit programs.

17 CFR 41.43 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... options with persons other than brokers, dealers, futures commission merchants, floor brokers, or floor... securities, commodity futures, or commodity options with persons other than brokers, dealers, persons....43 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION SECURITY FUTURES PRODUCTS...

75 FR 54794 - Commodity Pool Operators: Relief From Compliance With Certain Disclosure, Reporting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

... are subject to certain operational \\7\\ and advertising requirements \\8\\ under Part 4, to all other... in 17 CFR Part 4 Advertising, Brokers, Commodity futures, Commodity pool operators, Commodity trading...

78 FR 41384 - Agricultural Advisory Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

... COMMODITY FUTURES TRADING COMMISSION Agricultural Advisory Committee Meeting AGENCY: Commodity Futures Trading Commission. ACTION: Notice of Meeting. SUMMARY: The Commodity Futures Trading Commission's... Lachenmayr, Commodity Futures Trading Commission, Three Lafayette Centre, 1155 21st Street NW., Washington...

14 CFR 25.25 - Weight limits.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Weight limits. 25.25 Section 25.25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... requirement is shown, except that for airplanes equipped with standby power rocket engines the maximum weight...

14 CFR 25.25 - Weight limits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Weight limits. 25.25 Section 25.25 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... requirement is shown, except that for airplanes equipped with standby power rocket engines the maximum weight...

Improved Neural Networks with Random Weights for Short-Term Load Forecasting

PubMed Central

Lang, Kun; Zhang, Mingyuan; Yuan, Yongbo

2015-01-01

An effective forecasting model for short-term load plays a significant role in promoting the management efficiency of an electric power system. This paper proposes a new forecasting model based on the improved neural networks with random weights (INNRW). The key is to introduce a weighting technique to the inputs of the model and use a novel neural network to forecast the daily maximum load. Eight factors are selected as the inputs. A mutual information weighting algorithm is then used to allocate different weights to the inputs. The neural networks with random weights and kernels (KNNRW) is applied to approximate the nonlinear function between the selected inputs and the daily maximum load due to the fast learning speed and good generalization performance. In the application of the daily load in Dalian, the result of the proposed INNRW is compared with several previously developed forecasting models. The simulation experiment shows that the proposed model performs the best overall in short-term load forecasting. PMID:26629825

Improved Neural Networks with Random Weights for Short-Term Load Forecasting.

PubMed

Lang, Kun; Zhang, Mingyuan; Yuan, Yongbo

2015-01-01

An effective forecasting model for short-term load plays a significant role in promoting the management efficiency of an electric power system. This paper proposes a new forecasting model based on the improved neural networks with random weights (INNRW). The key is to introduce a weighting technique to the inputs of the model and use a novel neural network to forecast the daily maximum load. Eight factors are selected as the inputs. A mutual information weighting algorithm is then used to allocate different weights to the inputs. The neural networks with random weights and kernels (KNNRW) is applied to approximate the nonlinear function between the selected inputs and the daily maximum load due to the fast learning speed and good generalization performance. In the application of the daily load in Dalian, the result of the proposed INNRW is compared with several previously developed forecasting models. The simulation experiment shows that the proposed model performs the best overall in short-term load forecasting.

Influence of 7 days of hindlimb suspension and intermittent weight support on rat muscle mechanical properties

NASA Technical Reports Server (NTRS)

Pierotti, David J.; Roy, Roland R.; Flores, Vinicio; Edgerton, Reggie

1990-01-01

The effect of intermittent periods of weight support on a decrease in mass of the soleus (Sol) and medial gastrocnemius (MG) muscles atrophied by hindlimb suspension (HS) was investigated in rats subjected to continuous HS for seven days or an HS plus intermittent (10 min every 6 hrs of slow walking on a treadmill) weight support (HS-WS). After 7 d HS, the Sol weight relative to body weight was 21 and 9 percent lower in Hs and HS-WS, respectively, than in control rats. Maximum tetanic tension/muscle mass ratio was significantly lower in HS than in controls; the HS-WS rats had values similar to controls, whereas the maximum tetanic tension/muscle weight was significantly elevated in HS-WS compared to controls. Contraction times were 25 percent faster in the Sol and unchanged in the MG of HS rats, indicating that a low-force short-duration exercise regime results in a significant functional recovery in the 'slow' Sol, whereas the 'fast' MG is less affected.

Is sleep deprivation a contributor to obesity in children?

PubMed

Chaput, Jean-Philippe

2016-03-01

Chronic lack of sleep (called "sleep deprivation") is common in modern societies with 24/7 availability of commodities. Accumulating evidence supports the role of reduced sleep as contributing to the current obesity epidemic in children and youth. Longitudinal studies have consistently shown that short sleep duration is associated with weight gain and the development of obesity. Recent experimental studies have reported that sleep restriction leads to weight gain in humans. Increased food intake appears to be the main mechanism by which insufficient sleep results in weight gain. Voluntary sleep restriction has been shown to increase snacking, the number of meals eaten per day, and the preference for energy-dense foods. Although the causes of sleep loss in the pediatric population are numerous, more research looking at screen exposure before bedtime and its effects on sleep is needed given the pervasiveness of electronic media devices in today's environment. Health professionals should routinely ask questions about sleep and promote a good night's sleep because insufficient sleep impacts activity and eating behaviors. Future research should examine the clinical benefits of increasing sleep duration on eating behaviors and body weight control and determine the importance of adequate sleep to improve the treatment of obesity.

A Study on Market Efficiency of Selected Commodity Derivatives Traded on NCDEX During 2011

NASA Astrophysics Data System (ADS)

Sajipriya, N.

2012-10-01

The study aims at testing the weak form of Efficient Market Hypothesis in the context of an emerging commodity market - National Commodity Derivatives Exchange (NCDEX), which is considered as the prime commodity derivatives market in India. The study considered daily spot and futures prices of five selected commodities traded on NCDEX over 12 month period (the futures contracts originating and expiring during the period January 2011 to December 2011) The five commodities chosen are Pepper, Crude palm Oil, steel silver and Chana as they account for almost two-thirds of the value of agricultural commodity derivatives traded on NCDEX. The results of Run test indicate that both spot and futures prices are weak form efficient

17 CFR 242.401 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of whose business consists of transactions in securities, commodity futures, or commodity options... securities, commodity futures, or commodity options with persons other than brokers, dealers, persons... M, SHO, ATS, AC, AND NMS AND CUSTOMER MARGIN REQUIREMENTS FOR SECURITY FUTURES Customer Margin...

40 CFR 180.108 - Acephate; tolerances for residues.

Code of Federal Regulations, 2012 CFR

2012-07-01

... phosphoramidothioate, in or on the commodity. Commodity 1 Parts per million Bean, dry, seed 3.0 Bean, succulent 3.0... phosphoramidothioate, in or on the commodity. Commodity Parts per million Bean, dry, seed 1 Bean, succulent 1 Brussels...

40 CFR 180.108 - Acephate; tolerances for residues.

Code of Federal Regulations, 2011 CFR

2011-07-01

... phosphoramidothioate, in or on the commodity. Commodity 1 Parts per million Bean, dry, seed 3.0 Bean, succulent 3.0... phosphoramidothioate, in or on the commodity. Commodity Parts per million Bean, dry, seed 1 Bean, succulent 1 Brussels...

40 CFR 180.108 - Acephate; tolerances for residues.

Code of Federal Regulations, 2014 CFR

2014-07-01

... phosphoramidothioate, in or on the commodity. Commodity 1 Parts per million Bean, dry, seed 3.0 Bean, succulent 3.0... phosphoramidothioate, in or on the commodity. Commodity Parts per million Bean, dry, seed 1 Bean, succulent 1 Brussels...

40 CFR 180.108 - Acephate; tolerances for residues.

Code of Federal Regulations, 2013 CFR

2013-07-01

... phosphoramidothioate, in or on the commodity. Commodity 1 Parts per million Bean, dry, seed 3.0 Bean, succulent 3.0... phosphoramidothioate, in or on the commodity. Commodity Parts per million Bean, dry, seed 1 Bean, succulent 1 Brussels...

17 CFR 162.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... control with a covered affiliate. (b) Clear and conspicuous. The term “clear and conspicuous” means... exchange dealer, commodity trading advisor, commodity pool operator, introducing broker, major swap..., commodity trading advisor, commodity pool operator, introducing broker, major swap participant or swap...

17 CFR 162.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... corporate control with a covered affiliate. (b) Clear and conspicuous. The term “clear and conspicuous... exchange dealer, commodity trading advisor, commodity pool operator, introducing broker, major swap..., commodity trading advisor, commodity pool operator, introducing broker, major swap participant or swap...

17 CFR 162.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... control with a covered affiliate. (b) Clear and conspicuous. The term “clear and conspicuous” means... exchange dealer, commodity trading advisor, commodity pool operator, introducing broker, major swap..., commodity trading advisor, commodity pool operator, introducing broker, major swap participant or swap...

The Multi-Attribute Group Decision-Making Method Based on Interval Grey Trapezoid Fuzzy Linguistic Variables.

PubMed

Yin, Kedong; Wang, Pengyu; Li, Xuemei

2017-12-13

With respect to multi-attribute group decision-making (MAGDM) problems, where attribute values take the form of interval grey trapezoid fuzzy linguistic variables (IGTFLVs) and the weights (including expert and attribute weight) are unknown, improved grey relational MAGDM methods are proposed. First, the concept of IGTFLV, the operational rules, the distance between IGTFLVs, and the projection formula between the two IGTFLV vectors are defined. Second, the expert weights are determined by using the maximum proximity method based on the projection values between the IGTFLV vectors. The attribute weights are determined by the maximum deviation method and the priorities of alternatives are determined by improved grey relational analysis. Finally, an example is given to prove the effectiveness of the proposed method and the flexibility of IGTFLV.

Type 2 Diabetes Patients Benefit from the COMODITY12 mHealth System: Results of a Randomised Trial.

PubMed

Kardas, Przemysław; Lewandowski, Krzysztof; Bromuri, Stefano

2016-12-01

Patient acceptance is one of the major barriers toward widespread use of mHealth systems. The aim of this study was to assess system operability and whole trial feasibility, including patients' experience with their use of COMMODITY12 mHealth system under. Secondary study aims included assessment of several metabolic parameters as well as patient adherence to the treatment. This was a prospective parallel-arm randomized controlled trial in outpatients diagnosed with DM2, being treated in the primary care settings in Lodz region, Poland, with 6 weeks period of follow-up. Patients opinions were collected with 7-item questionnaire, assessing different aspects of system use, as well as EuroQol-5D-5 L questionnaire, assessing health-related quality of life. Sixty patients (female, 24, male, 36, mean age +/- SD 59.5 +/- 6.8) completed study. All four layers of the COMMODITY12 system proved to work smooth under real-life conditions, without major problems. All dimensions of experience with system use were assessed well, with maximum values for clearness of instructions, and ease of use (4.80, and 4.63, respectively). Health related quality of life, as assessed with cumulative utility measure, improved significantly in COMMODITY12 system users (P < 0.05). mHealth system modestly improved glycaemic and blood pressure control, assuring high level of patient adherence with overall adherence reaching 92.9 %. Study proved that the COMODITY12 system is well accepted by type 2 diabetes patients taking part in clinical trial, leading to several clinical benefits, and improved quality of life. Nevertheless, before future commercialisation of the system, several minor problems identified during the study need to be addressed.

Effective Utilization of Resources and Infrastructure for a Spaceport Network Architecture

NASA Technical Reports Server (NTRS)

Gill, Tracy; Larson, Wiley; Mueller, Robert; Roberson, Luke

2012-01-01

Providing routine, affordable access to a variety of orbital and deep space destinations requires an intricate network of ground, planetary surface, and space-based spaceports like those on Earth (land and sea), in various Earth orbits, and on other extraterrestrial surfaces. Advancements in technology and international collaboration are critical to establish a spaceport network that satisfies the requirements for private and government research, exploration, and commercial objectives. Technologies, interfaces, assembly techniques, and protocols must be adapted to enable mission critical capabilities and interoperability throughout the spaceport network. The conceptual space mission architecture must address the full range of required spaceport services, from managing propellants for a variety of spacecraft to governance structure. In order to accomplish affordability and sustainability goals, the network architecture must consider deriving propellants from in situ planetary resources to the maximum extent possible. Water on the Moon and Mars, Mars' atmospheric CO2, and O2 extracted from lunar regolith are examples of in situ resources that could be used to generate propellants for various spacecraft, orbital stages and trajectories, and the commodities to support habitation and human operations at these destinations. The ability to use in-space fuel depots containing in situ derived propellants would drastically reduce the mass required to launch long-duration or deep space missions from Earth's gravity well. Advances in transformative technologies and common capabilities, interfaces, umbilicals, commodities, protocols, and agreements will facilitate a cost-effective, safe, reliable infrastructure for a versatile network of Earth- and extraterrestrial spaceports. Defining a common infrastructure on Earth, planetary surfaces, and in space, as well as deriving propellants from in situ planetary resources to construct in-space propellant depots to serve the spaceport network, will reduce exploration costs due to standardization of infrastructure commonality and reduction in number and types of interfaces and commodities.

Cross-commodity delay discounting of alcohol and money in alcohol users

PubMed Central

Moody, Lara N.; Tegge, Allison N.; Bickel, Warren K.

2017-01-01

Despite real-world implications, the pattern of delay discounting in alcohol users when the commodities now and later differ has not been well characterized. In this study, 60 participants on Amazon's Mechanical Turk completed the Alcohol Use Disorder Identification Test (AUDIT) to assess severity of use and completed four delay discounting tasks between hypothetical, equivalent amounts of alcohol and money available at five delays. The tasks included two cross-commodity (alcohol now-money later and money now-alcohol later) and two same-commodity (money now-money later and alcohol now-alcohol later) conditions. Delay discounting was significantly associated with clinical cutoffs of the AUDIT for both of the cross-commodity conditions but not for either of the same-commodity delay discounting tasks. The cross-commodity discounting conditions were related to severity of use wherein heavy users discounted future alcohol less and future money more. The change in direction of the discounting effect was dependent on the commodity that was distally available suggesting a distinctive pattern of discounting across commodities when comparing light and heavy alcohol users. PMID:29056767

Cross-commodity delay discounting of alcohol and money in alcohol users.

PubMed

Moody, Lara N; Tegge, Allison N; Bickel, Warren K

2017-06-01

Despite real-world implications, the pattern of delay discounting in alcohol users when the commodities now and later differ has not been well characterized. In this study, 60 participants on Amazon's Mechanical Turk completed the Alcohol Use Disorder Identification Test (AUDIT) to assess severity of use and completed four delay discounting tasks between hypothetical, equivalent amounts of alcohol and money available at five delays. The tasks included two cross-commodity (alcohol now-money later and money now-alcohol later) and two same-commodity (money now-money later and alcohol now-alcohol later) conditions. Delay discounting was significantly associated with clinical cutoffs of the AUDIT for both of the cross-commodity conditions but not for either of the same-commodity delay discounting tasks. The cross-commodity discounting conditions were related to severity of use wherein heavy users discounted future alcohol less and future money more. The change in direction of the discounting effect was dependent on the commodity that was distally available suggesting a distinctive pattern of discounting across commodities when comparing light and heavy alcohol users.

Estimating usable resources from historical industry data.

USGS Publications Warehouse

Cargill, S.M.; Root, D.H.; Bailey, E.H.

1981-01-01

The commodities considered are mercury, copper and its byproducts gold and silver, and petroleum; the production and discovery data are for the US. The results indicate that the cumulative return per unit of effort, herein measured as grade of metal ores and discovery rate of recoverable petroleum, is proportional to a negative power of total effort expended, herein measured as total ore mined and total exploratory wells or footage drilled. This power relationship can be extended to some limiting point (a lower ore grade or a maximum number of exploratory wells or footage), and the apparent quantity of available remaining resource at that limit can be calculated. -from Authors

46 CFR 151.04-1 - Certificate of inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Inspection and Certification § 151.04-1 Certificate of... maximum cargo weight (short tons), maximum density (pounds per gallon) and any operating limitations and a...

46 CFR 151.04-1 - Certificate of inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Inspection and Certification § 151.04-1 Certificate of... maximum cargo weight (short tons), maximum density (pounds per gallon) and any operating limitations and a...

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149...

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149...

17 CFR Appendix C to Part 1 - [Reserved

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 1 2014-04-01 2014-04-01 false [Reserved] C Appendix C to Part 1 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Appendix C to Part 1 [Reserved] ...

Estimation and Testing of Partial Covariances, Correlations, and Regression Weights Using Maximum Likelihood Factor Analysis.

ERIC Educational Resources Information Center

And Others; Werts, Charles E.

1979-01-01

It is shown how partial covariance, part and partial correlation, and regression weights can be estimated and tested for significance by means of a factor analytic model. Comparable partial covariance, correlations, and regression weights have identical significance tests. (Author)

Analyzing Quadratic Unconstrained Binary Optimization Problems Via Multicommodity Flows

PubMed Central

Wang, Di; Kleinberg, Robert D.

2009-01-01

Quadratic Unconstrained Binary Optimization (QUBO) problems concern the minimization of quadratic polynomials in n {0, 1}-valued variables. These problems are NP-complete, but prior work has identified a sequence of polynomial-time computable lower bounds on the minimum value, denoted by C2, C3, C4,…. It is known that C2 can be computed by solving a maximum-flow problem, whereas the only previously known algorithms for computing Ck (k > 2) require solving a linear program. In this paper we prove that C3 can be computed by solving a maximum multicommodity flow problem in a graph constructed from the quadratic function. In addition to providing a lower bound on the minimum value of the quadratic function on {0, 1}n, this multicommodity flow problem also provides some information about the coordinates of the point where this minimum is achieved. By looking at the edges that are never saturated in any maximum multicommodity flow, we can identify relational persistencies: pairs of variables that must have the same or different values in any minimizing assignment. We furthermore show that all of these persistencies can be detected by solving single-commodity flow problems in the same network. PMID:20161596

Analyzing Quadratic Unconstrained Binary Optimization Problems Via Multicommodity Flows.

PubMed

Wang, Di; Kleinberg, Robert D

2009-11-28

Quadratic Unconstrained Binary Optimization (QUBO) problems concern the minimization of quadratic polynomials in n {0, 1}-valued variables. These problems are NP-complete, but prior work has identified a sequence of polynomial-time computable lower bounds on the minimum value, denoted by C(2), C(3), C(4),…. It is known that C(2) can be computed by solving a maximum-flow problem, whereas the only previously known algorithms for computing C(k) (k > 2) require solving a linear program. In this paper we prove that C(3) can be computed by solving a maximum multicommodity flow problem in a graph constructed from the quadratic function. In addition to providing a lower bound on the minimum value of the quadratic function on {0, 1}(n), this multicommodity flow problem also provides some information about the coordinates of the point where this minimum is achieved. By looking at the edges that are never saturated in any maximum multicommodity flow, we can identify relational persistencies: pairs of variables that must have the same or different values in any minimizing assignment. We furthermore show that all of these persistencies can be detected by solving single-commodity flow problems in the same network.

17 CFR 1.1 - [Reserved

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false [Reserved] 1.1 Section 1.1 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Definitions § 1.1 [Reserved] [66 FR 42269, Aug. 10, 2001] ...

75 FR 77576 - General Regulations and Derivatives Clearing Organizations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-13

... Derivatives Clearing Organizations AGENCY: Commodity Futures Trading Commission. ACTION: Notice of proposed... clearing transactions in commodities for future delivery or commodity option transactions, or for effecting settlements of contracts for future delivery or commodity option transactions, for and between members of any...

40 CFR 414.60 - Applicability; description of the commodity organic chemicals subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... commodity organic chemicals subcategory. 414.60 Section 414.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS Commodity Organic Chemicals § 414.60 Applicability; description of the commodity organic chemicals...

40 CFR 414.60 - Applicability; description of the commodity organic chemicals subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... commodity organic chemicals subcategory. 414.60 Section 414.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS Commodity Organic Chemicals § 414.60 Applicability; description of the commodity organic chemicals...

40 CFR 414.60 - Applicability; description of the commodity organic chemicals subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... commodity organic chemicals subcategory. 414.60 Section 414.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS Commodity Organic Chemicals § 414.60 Applicability; description of the commodity organic chemicals...

40 CFR 414.60 - Applicability; description of the commodity organic chemicals subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... commodity organic chemicals subcategory. 414.60 Section 414.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS Commodity Organic Chemicals § 414.60 Applicability; description of the commodity organic chemicals...

40 CFR 414.60 - Applicability; description of the commodity organic chemicals subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... commodity organic chemicals subcategory. 414.60 Section 414.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS Commodity Organic Chemicals § 414.60 Applicability; description of the commodity organic chemicals...

40 CFR 180.473 - Glufosinate ammonium; tolerances for residues.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 2-amino-4-(hydroxymethylphosphinyl)butanoic acid, in or on the commodity. Commodity Parts per... measuring only the sum of glufosinate ammonium, 2-amino-4-(hydroxymethylphosphinyl)butanoic acid... stoichiometric equivalent of 2-amino-4-(hydroxymethylphosphinyl)butanoic acid, in or on the commodity. Commodity...

26 CFR 4.954-0 - Introduction.

Code of Federal Regulations, 2010 CFR

2010-04-01

... corporation beginning after December 31, 1986. Consequently, any gain or loss (including foreign currency gain.... [Reserved] (f) Commodities transactions. (1) In general. (2) Definitions. (i) Commodity. (ii) Commodities transaction. (3) Definition of the term “qualified active sales”. (i) In general. (ii) Sale of commodities...

26 CFR 4.954-0 - Introduction.

Code of Federal Regulations, 2011 CFR

2011-04-01

... corporation beginning after December 31, 1986. Consequently, any gain or loss (including foreign currency gain.... [Reserved] (f) Commodities transactions. (1) In general. (2) Definitions. (i) Commodity. (ii) Commodities transaction. (3) Definition of the term “qualified active sales”. (i) In general. (ii) Sale of commodities...

32 CFR 275.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... dealer in securities or commodities. (9) An investment banker or investment company. (10) A currency... matters. (26) Any futures commission merchant, commodity trading advisor, or commodity pool operator registered, or required to register, under the Commodity Exchange Act that is located inside any State or...

77 FR 27444 - Joint CFTC-SEC Advisory Committee on Emerging Regulatory Issues

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-10

... SECURITIES AND EXCHANGE COMMISSION COMMODITY FUTURES TRADING COMMISSION [Release Nos. 34-66932... and Exchange Commission (``SEC'') and Commodity Futures Trading Commission (``CFTC'') (each, an.... Commodity Futures Trading Commission Written comments may be mailed to the Commodity Futures Trading...

17 CFR 1.1 - [Reserved

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false [Reserved] 1.1 Section 1.1 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Definitions § 1.1 [Reserved] [66 FR 42269, Aug. 10, 2001] ...

17 CFR 1.1 - [Reserved

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 1 2013-04-01 2013-04-01 false [Reserved] 1.1 Section 1.1 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Definitions § 1.1 [Reserved] [66 FR 42269, Aug. 10, 2001] ...

17 CFR 1.1 - [Reserved

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 1 2014-04-01 2014-04-01 false [Reserved] 1.1 Section 1.1 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Definitions § 1.1 [Reserved] [66 FR 42269, Aug. 10, 2001] ...

A world of minerals in your mobile device

USGS Publications Warehouse

Jenness, Jane E.; Ober, Joyce A.; Wilkins, Aleeza M.; Gambogi, Joseph

2016-09-15

Mobile phones and other high-technology communications devices could not exist without mineral commodities. More than one-half of all components in a mobile device—including its electronics, display, battery, speakers, and more—are made from mined and semiprocessed materials (mineral commodities). Some mineral commodities can be recovered as byproducts during the production and processing of other commodities. As an example, bauxite is mined for its aluminum content, but gallium is recovered during the aluminum production process. The images show the ore minerals (sources) of some mineral commodities that are used to make components of a mobile device. On the reverse side, the map and table depict the major source countries producing these mineral commodities along with how these commodities are used in mobile devices. For more information on minerals, visit http://minerals.usgs.gov.

Growth of the eye lens: II. Allometric studies

PubMed Central

2014-01-01

Purpose The purpose of this study was to examine the ontogeny and phylogeny of lens growth in a variety of species using allometry. Methods Data on the accumulation of wet and/or dry lens weight as a function of bodyweight were obtained for 40 species and subjected to allometric analysis to examine ontogenic growth and compaction. Allometric analysis was also used to compare the maximum adult lens weights for 147 species with the maximum adult bodyweight and to compare lens volumes calculated from wet and dry weights with eye volumes calculated from axial length. Results Linear allometric relationships were obtained for the comparison of ontogenic lens and bodyweight accumulation. The body mass exponent (BME) decreased with increasing animal size from around 1.0 in small rodents to 0.4 in large ungulates for both wet and dry weights. Compaction constants for the ontogenic growth ranged from 1.00 in birds and reptiles up to 1.30 in mammals. Allometric comparison of maximum lens wet and dry weights with maximum bodyweights also yielded linear plots with a BME of 0.504 for all warm blooded species except primates which had a BME of 0.25. When lens volumes were compared with eye volumes, all species yielded a scaling constant of 0.75 but the proportionality constants for primates and birds were lower. Conclusions Ontogenic lens growth is fastest, relative to body growth, in small animals and slowest in large animals. Fiber cell compaction takes place throughout life in most species, but not in birds and reptiles. Maximum adult lens size scales with eye size with the same exponent in all species, but birds and primates have smaller lenses relative to eye size than other species. Optical properties of the lens are generated through the combination of variations in the rate of growth, rate of compaction, shape and size. PMID:24715759

Preliminary Metallogenic Map of North America; a listing of deposits by commodity

USGS Publications Warehouse

Lee, Michael P.; Guild, Philip White; Schruben, Paul G.

1987-01-01

The 4,215 ore deposits shown on the Preliminary Metallogenic Map of North America and contained in the Metallogenic Map file have been sorted by their principal (first-listed) commodities and grouped into metallic and nonmetallic categories. Deposit listings for 56 individual metals and minerals have been assembled using the data base and are arranged alphabetically by country, political subdivision (for the larger countries), and deposit name. Map numbers, major and minor constituents, geographic coordinates, and a geologic code are given for each deposit; additionally, the relative size and deposit class have been derived from the code and are listed separately. The frequencies of individual commodities and commodity groups by type, geographic distribution, and geologic occurrence are summarized in tables, and the relationships of associated commodities to principal commodities in the data base are emphasized in both tables and brief texts. In all, 49 metals and minerals are listed as principal (first or only) commodities and 7 more are shown as 'major' but not principal commodities. (Commodities listed as 'minor' in the data base were not sorted or tabulated separately.) Metals, divided into six subgroups, predominate over nonmetallic minerals by a ratio of about 7 to 1, although in terms of quantities and value the disparity is not so great. Within the metals group, the ranking according to frequency is as follows: base, precious, iron and alloying, other (antimony, beryllium, and others), nuclear-fuel, and light metals. The most frequently occurring commodity in the Metallogenic Map file is gold. Copper is ranked second, both in number of occurrences and as the principal commodity in deposits. Silver is ranked third in frequency of occurrence; lead and zinc are ranked fourth and fifth, respectively. Iron, ranked sixth in frequency of occurrence as a major commodity, is the third most reported principal commodity in the data base, ahead of silver (ranked fourth), lead (ranked fifth), and zinc (ranked sixth).

7 CFR 1427.22 - Commodity certificate exchanges.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Commodity certificate exchanges. 1427.22 Section 1427... Deficiency Payments § 1427.22 Commodity certificate exchanges. (a) For any outstanding marketing assistance loan provided for upland cotton, a producer may purchase a commodity certificate and exchange that...

44 CFR 206.151 - Food commodities.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 44 Emergency Management and Assistance 1 2013-10-01 2013-10-01 false Food commodities. 206.151... Food commodities. (a) The Administrator will assure that adequate stocks of food will be ready and... section, the Administrator may direct the Secretary of Agriculture to purchase food commodities in...

44 CFR 206.151 - Food commodities.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 44 Emergency Management and Assistance 1 2014-10-01 2014-10-01 false Food commodities. 206.151... Food commodities. (a) The Administrator will assure that adequate stocks of food will be ready and... section, the Administrator may direct the Secretary of Agriculture to purchase food commodities in...

44 CFR 206.151 - Food commodities.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false Food commodities. 206.151... Food commodities. (a) The Administrator will assure that adequate stocks of food will be ready and... section, the Administrator may direct the Secretary of Agriculture to purchase food commodities in...

44 CFR 206.151 - Food commodities.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 44 Emergency Management and Assistance 1 2012-10-01 2011-10-01 true Food commodities. 206.151... Food commodities. (a) The Administrator will assure that adequate stocks of food will be ready and... section, the Administrator may direct the Secretary of Agriculture to purchase food commodities in...

Commodity-based Approach for Evaluating the Value of Freight Moving on Texas’ Roadway Network

DOT National Transportation Integrated Search

2017-12-10

The researchers took a commodity-based approach to evaluate the value of a list of selected commodities moved on the Texas freight network. This approach takes advantage of commodity-specific data sources and modeling processes. It provides a unique ...

22 CFR 228.51 - Commodities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Commodities. 228.51 Section 228.51 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON SOURCE, ORIGIN AND NATIONALITY FOR COMMODITIES AND... agricultural commodities, motor vehicles, or pharmaceuticals (see § 228.13, “Special source rules requiring...

17 CFR 190.10 - General.

Code of Federal Regulations, 2012 CFR

2012-04-01

... STATEMENT IS FURNISHED TO YOU BECAUSE RULE 190.10 (c) OF THE COMMODITY FUTURES TRADING COMMISSION REQUIRES... any combination of the following: futures commission merchant, commodity option dealer, foreign... “from or for the commodity futures account” or “from or for the commodity options account” of such...

17 CFR 32.6 - Segregation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Segregation. 32.6 Section 32.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION TRANSACTIONS § 32.6 Segregation. (a) Any person which accepts money, securities, or property from an option...

17 CFR 32.6 - Segregation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Segregation. 32.6 Section 32.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGULATION OF COMMODITY OPTION TRANSACTIONS § 32.6 Segregation. (a) Any person which accepts money, securities, or property from an option...

7 CFR 1421.110 - Commodity certificate exchanges.

Code of Federal Regulations, 2010 CFR

2010-01-01

... COMMODITIES-MARKETING ASSISTANCE LOANS AND LOAN DEFICIENCY PAYMENTS FOR 2008 THROUGH 2012 Marketing Assistance Loans § 1421.110 Commodity certificate exchanges. (a) For any outstanding marketing assistance loan for... commodity certificate for the marketing assistance loan collateral. (b) The exchange rate is the lesser of...

7 CFR 1488.8 - Documents required after delivery.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGRICULTURAL COMMODITIES Financing of Export Sales of Agricultural Commodities From Private Stocks Under CCC... delivery. (a) CCC will purchase an exporter's account receivable only if the Treasurer, Commodity Credit... or Assistant Treasurer, CCC, after date of delivery of commodities exported or to be exported under...

7 CFR 1488.8 - Documents required after delivery.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURAL COMMODITIES Financing of Export Sales of Agricultural Commodities From Private Stocks Under CCC... delivery. (a) CCC will purchase an exporter's account receivable only if the Treasurer, Commodity Credit... or Assistant Treasurer, CCC, after date of delivery of commodities exported or to be exported under...

Neonates with Bartter syndrome have enormous fluid and sodium requirements.

PubMed

Azzi, Antonio; Chehade, Hassib; Deschênes, Georges

2015-07-01

Managing neonatal Bartter syndrome by achieving adequate weight gain is challenging. We assessed the correlation between weight gain in neonatal Bartter syndrome and the introduction of fluid and sodium supplementations and indomethacin during the first 4 weeks of life. Daily fluid and electrolytes requirements were analysed using linear regression and Spearman correlation coefficients. The weight gain coefficient was calculated as daily weight gain after physiological neonatal weight loss. We studied seven infants. The highest weight gain coefficients occurred between weeks two and four in the five neonates who either received prompt amounts of fluid (maximum 810 mL/kg/day) and sodium (maximum 70 mmol/kg/day) or were treated with indomethacin. For the two patients with the highest weight gain coefficient, water and sodium supplementations were decreased in weeks two to four leading to a significant negative Spearman correlation between weight gain and fluid supplements (r = -0.55 and -0.68) and weight gain and sodium supplementations (r = -0.96 and -0.72). The two patients with the lowest weight gain coefficient had positive Spearman correlation coefficients between weight gain and fluid and sodium supplementations. Infants with neonatal Bartter syndrome required rapid and enormous fluid and sodium supplementations or the early introduction of indomethacin treatment to achieve adequate weight gain during the early postnatal period. ©2015 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Major International R and D Ranges and Test Facilities. Summary of Capabilities

DTIC Science & Technology

1990-01-01

with a maximum impulse of firing of large numbers of rounds by a weapon in order to 1500 G and a maximum test item weight of 200 pounds. produce...millimetres may be fired safely, using test item weight of 1,000 pounds. training practice or training practice tracer ammunition. The :ange butts consist of...predictions of coherent sound propagation loss in the ocean. This information is useful in estimating the performance of low-frequency passive sonars

22 CFR 228.52 - Suppliers of commodities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Suppliers of commodities. 228.52 Section 228.52 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON SOURCE, ORIGIN AND NATIONALITY FOR COMMODITIES AND SERVICES FINANCED BY USAID Waivers § 228.52 Suppliers of commodities. Geographic code changes...

7 CFR 17.2 - Definition of terms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Office of the Secretary of Agriculture SALES OF AGRICULTURAL COMMODITIES MADE AVAILABLE UNDER TITLE I OF... in the second legal entity. CCC. The Commodity Credit Corporation, USDA. Commodity. An agricultural commodity produced in the United States, or product thereof produced in the United States, as specified in...

17 CFR 1.32 - Segregated account; daily computation and record.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Segregated account; daily computation and record. 1.32 Section 1.32 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Recordkeeping § 1.32 Segregated account...

31 CFR 560.533 - Brokering sales of agricultural commodities, medicine, and medical devices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... commodities, medicine, and medical devices. 560.533 Section 560.533 Money and Finance: Treasury Regulations... Brokering sales of agricultural commodities, medicine, and medical devices. (a) General license for... agricultural commodities, medicine, and medical devices, provided that the sale and exportation or...

31 CFR 560.533 - Brokering sales of agricultural commodities, medicine, and medical devices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... commodities, medicine, and medical devices. 560.533 Section 560.533 Money and Finance: Treasury Regulations... Brokering sales of agricultural commodities, medicine, and medical devices. (a) General license for... agricultural commodities, medicine, and medical devices, provided that the sale and exportation or...

Nickel-chromium-silicon brazing filler metal

DOEpatents

Martini, Angelo J.; Gourley, Bruce R.

1976-01-01

A brazing filler metal containing, by weight percent, 23-35% chromium, 9-12% silicon, a maximum of 0.15% carbon, and the remainder nickel. The maximum amount of elements other than those noted above is 1.00%.

Effect of electron-hole asymmetry on optical conductivity in 8 -P m m n borophene

NASA Astrophysics Data System (ADS)

Verma, Sonu; Mawrie, Alestin; Ghosh, Tarun Kanti

2017-10-01

We present a detailed theoretical study of the Drude weight and optical conductivity of 8-P m m n borophene having tilted anisotropic Dirac cones. We provide exact analytical expressions of x x and y y components of the Drude weight as well as maximum optical conductivity. We also obtain exact analytical expressions of the minimum energy (ɛ1) required to trigger the optical transitions and energy (ɛ2) needed to attain maximum optical conductivity. We find that the Drude weight and optical conductivity are highly anisotropic as a consequence of the anisotropic Dirac cone. The optical conductivities have a nonmonotonic behavior with photon energy in the regime between ɛ1 and ɛ2, as a result of the tilted parameter vt. The tilted parameter can be extracted by knowing ɛ1 and ɛ2 from optical measurements. The maximum values of the components of the optical conductivity do not depend on the carrier density and the tilted parameter. The product of the maximum values of the anisotropic conductivities has the universal value (e2/4ℏ ) 2. The tilted anisotropic Dirac cones in 8-P m m n borophene can be realized by the optical conductivity measurement.

Capital dissipation minimization for a class of complex irreversible resource exchange processes

NASA Astrophysics Data System (ADS)

Xia, Shaojun; Chen, Lingen

2017-05-01

A model of a class of irreversible resource exchange processes (REPes) between a firm and a producer with commodity flow leakage from the producer to a competitive market is established in this paper. The REPes are assumed to obey the linear commodity transfer law (LCTL). Optimal price paths for capital dissipation minimization (CDM) (it can measure economic process irreversibility) are obtained. The averaged optimal control theory is used. The optimal REP strategy is also compared with other strategies, such as constant-firm-price operation and constant-commodity-flow operation, and effects of the amount of commodity transferred and the commodity flow leakage on the optimal REP strategy are also analyzed. The commodity prices of both the producer and the firm for the CDM of the REPes with commodity flow leakage change with the time exponentially.

Step Test: a method for evaluating maximum oxygen consumption to determine the ability kind of work among students of medical emergencies

PubMed Central

Heydari, Payam; Varmazyar, Sakineh; Nikpey, Ahmad; Variani, Ali Safari; Jafarvand, Mojtaba

2017-01-01

Introduction Maximum oxygen consumption shows the maximum oxygen rate of muscle oxygenation that is acceptable in many cases, to measure the fitness between person and the desired job. Given that medical emergencies are important, and difficult jobs in emergency situations require people with high physical ability and readiness for the job, the aim of this study was to evaluate the maximum oxygen consumption, to determine the ability of work type among students of medical emergencies in Qazvin in 2016. Methods This study was a descriptive – analytical, and in cross-sectional type conducted among 36 volunteer students of medical emergencies in Qazvin in 2016. After necessary coordination for the implementation of the study, participants completed health questionnaires and demographic characteristics and then the participants were evaluated with step tests of American College of Sport Medicine (ACSM). Data analysis was done by SPSS version 18 and U-Mann-Whitney tests, Kruskal-Wallis and Pearson correlation coefficient. Results Average of maximum oxygen consumption of the participants was estimated 3.15±0.50 liters per minute. 91.7% of medical emergencies students were selected as appropriate in terms of maximum oxygen consumption and thus had the ability to do heavy and too heavy work. Average of maximum oxygen consumption evaluated by the U-Mann-Whitney test and Kruskal-Wallis, had significant relationship with age (p<0.05) and weight groups (p<0.001). There was a significant positive correlation between maximum oxygen consumption with weight and body mass index (p<0.001). Conclusion The results of this study showed that demographic variables of weight and body mass index are the factors influencing the determination of maximum oxygen consumption, as most of the students had the ability to do heavy, and too heavy work. Therefore, people with ability to do average work are not suitable for medical emergency tasks. PMID:28461880

Step Test: a method for evaluating maximum oxygen consumption to determine the ability kind of work among students of medical emergencies.

PubMed

Heydari, Payam; Varmazyar, Sakineh; Nikpey, Ahmad; Variani, Ali Safari; Jafarvand, Mojtaba

2017-03-01

Maximum oxygen consumption shows the maximum oxygen rate of muscle oxygenation that is acceptable in many cases, to measure the fitness between person and the desired job. Given that medical emergencies are important, and difficult jobs in emergency situations require people with high physical ability and readiness for the job, the aim of this study was to evaluate the maximum oxygen consumption, to determine the ability of work type among students of medical emergencies in Qazvin in 2016. This study was a descriptive - analytical, and in cross-sectional type conducted among 36 volunteer students of medical emergencies in Qazvin in 2016. After necessary coordination for the implementation of the study, participants completed health questionnaires and demographic characteristics and then the participants were evaluated with step tests of American College of Sport Medicine (ACSM). Data analysis was done by SPSS version 18 and U-Mann-Whitney tests, Kruskal-Wallis and Pearson correlation coefficient. Average of maximum oxygen consumption of the participants was estimated 3.15±0.50 liters per minute. 91.7% of medical emergencies students were selected as appropriate in terms of maximum oxygen consumption and thus had the ability to do heavy and too heavy work. Average of maximum oxygen consumption evaluated by the U-Mann-Whitney test and Kruskal-Wallis, had significant relationship with age (p<0.05) and weight groups (p<0.001). There was a significant positive correlation between maximum oxygen consumption with weight and body mass index (p<0.001). The results of this study showed that demographic variables of weight and body mass index are the factors influencing the determination of maximum oxygen consumption, as most of the students had the ability to do heavy, and too heavy work. Therefore, people with ability to do average work are not suitable for medical emergency tasks.

14 CFR 29.321 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... load factor must be assumed to act normal to the longitudinal axis of the rotorcraft, and to be equal... from the design minimum weight to the design maximum weight; and (2) With any practical distribution of...

17 CFR 2.2 - Authority to affix seal.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Authority to affix seal. 2.2 Section 2.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFFICIAL SEAL § 2.2 Authority to affix seal. (a) The following officials of the Commodity Futures Trading Commission are...

17 CFR 2.2 - Authority to affix seal.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Authority to affix seal. 2.2 Section 2.2 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFFICIAL SEAL § 2.2 Authority to affix seal. (a) The following officials of the Commodity Futures Trading Commission are...

29 CFR 780.112 - General meaning of “agriculture or horticultural commodities.”

Code of Federal Regulations, 2011 CFR

2011-07-01

... EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT General Scope of Agriculture Agricultural Or Horticultural Commodities § 780.112 General meaning of “agriculture or horticultural commodities.” Section 3(f) of the Act defines as...

29 CFR 780.112 - General meaning of “agriculture or horticultural commodities.”

Code of Federal Regulations, 2010 CFR

2010-07-01

... EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT General Scope of Agriculture Agricultural Or Horticultural Commodities § 780.112 General meaning of “agriculture or horticultural commodities.” Section 3(f) of the Act defines as...

29 CFR 780.112 - General meaning of “agriculture or horticultural commodities.”

Code of Federal Regulations, 2013 CFR

2013-07-01

... EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT General Scope of Agriculture Agricultural Or Horticultural Commodities § 780.112 General meaning of “agriculture or horticultural commodities.” Section 3(f) of the Act defines as...

29 CFR 780.112 - General meaning of “agriculture or horticultural commodities.”

Code of Federal Regulations, 2014 CFR

2014-07-01

... EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT General Scope of Agriculture Agricultural Or Horticultural Commodities § 780.112 General meaning of “agriculture or horticultural commodities.” Section 3(f) of the Act defines as...

29 CFR 780.112 - General meaning of “agriculture or horticultural commodities.”

Code of Federal Regulations, 2012 CFR

2012-07-01

... EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT General Scope of Agriculture Agricultural Or Horticultural Commodities § 780.112 General meaning of “agriculture or horticultural commodities.” Section 3(f) of the Act defines as...

22 CFR 228.11 - Source and origin of commodities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Source and origin of commodities. 228.11 Section 228.11 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON SOURCE, ORIGIN AND... Commodity Procurement Transactions for USAID Financing § 228.11 Source and origin of commodities. (a) The...

17 CFR 1.49 - Denomination of customer funds and location of depositories.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Denomination of customer funds and location of depositories. 1.49 Section 1.49 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Miscellaneous § 1.49 Denomination...

17 CFR Appendix B to Part 190 - Special Bankruptcy Distributions

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Special Bankruptcy Distributions B Appendix B to Part 190 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION... purposes of this distributional rule, XM accounts will be deemed to be commodity interest accounts and...

31 CFR 560.533 - Brokering sales of agricultural commodities, medicine, and medical devices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... commodities, medicine, and medical devices. 560.533 Section 560.533 Money and Finance: Treasury Regulations... Policy § 560.533 Brokering sales of agricultural commodities, medicine, and medical devices. (a) General... of agricultural commodities, medicine, and medical devices, provided that the sale and exportation or...

31 CFR 538.526 - Brokering sales of agricultural commodities, medicine, and medical devices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... commodities, medicine, and medical devices. 538.526 Section 538.526 Money and Finance: Treasury Regulations... Brokering sales of agricultural commodities, medicine, and medical devices. (a) General license for... agricultural commodities, medicine, and medical devices to the Government of Sudan, to any individual or entity...

31 CFR 560.533 - Brokering sales of agricultural commodities, medicine, and medical devices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... commodities, medicine, and medical devices. 560.533 Section 560.533 Money and Finance: Treasury Regulations... Policy § 560.533 Brokering sales of agricultural commodities, medicine, and medical devices. (a) General... agricultural commodities, medicine, and medical devices, provided that the sale and exportation or...

31 CFR 538.526 - Brokering sales of agricultural commodities, medicine, and medical devices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... commodities, medicine, and medical devices. 538.526 Section 538.526 Money and Finance: Treasury Regulations... Brokering sales of agricultural commodities, medicine, and medical devices. (a) General license for... agricultural commodities, medicine, and medical devices to the Government of Sudan, to any individual or entity...

31 CFR 560.530 - Commercial sales, exportation, and reexportation of agricultural commodities, medicine, and...

Code of Federal Regulations, 2014 CFR

2014-07-01

... reexportation of agricultural commodities, medicine, and medical devices. 560.530 Section 560.530 Money and... commodities, medicine, and medical devices. (a)(1) One-year license requirement. (i) The exportation or reexportation of agricultural commodities, medicine, and medical devices that are not covered by the general...

17 CFR 4.12 - Exemption from provisions of part 4.

Code of Federal Regulations, 2010 CFR

2010-04-01

... part 4. 4.12 Section 4.12 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION... said Act; (B) Will generally and routinely engage in the buying and selling of securities and securities derived instruments; (C) Will not enter into commodity futures and commodity options contracts for...

31 CFR 560.526 - Commodities trading and related transactions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Commodities trading and related... Licenses, Authorizations and Statements of Licensing Policy § 560.526 Commodities trading and related transactions. (a) Trading in Iranian-origin commodities. With respect to § 560.206, specific licenses may be...

75 FR 44890 - Operation, in the Ordinary Course, of a Commodity Broker in Bankruptcy

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-30

... of the customers of such commodity broker, under appropriate circumstances, as determined by the... contracts on behalf of the customers of such commodity broker (the ``Notice'').\\1\\ The proposed rule stated... customer accounts are handled, under appropriate circumstances, in a commodity broker bankruptcy, which may...

7 CFR 17.5 - Contracts between commodity suppliers and importers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... officers and a description of the firm's experience as an exporter of U.S. agricultural commodities. Copies... under this part and the purchase authorization. (3) If, at the time the commodity supplier reports the... requirements unless otherwise specified in the purchase authorization. (1) Commodity contracts between...

17 CFR 31.6 - Registration of leverage commodities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... commodity's economic value and how such amendments might affect the ability of leverage customers making or... a change in the economic value of such commodities and, if so, quantify the extent of such changes... the ability of leverage customers electing to make or take delivery of the commodity at an economic...

31 CFR 560.526 - Commodities trading and related transactions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Commodities trading and related... Licenses, Authorizations and Statements of Licensing Policy § 560.526 Commodities trading and related transactions. (a) Trading in Iranian-origin commodities. With respect to § 560.206, specific licenses may be...

7 CFR 1488.9a - Evidence of export for commodities delivered before export.

Code of Federal Regulations, 2013 CFR

2013-01-01

... COMMODITIES Financing of Export Sales of Agricultural Commodities From Private Stocks Under CCC Export Credit... financial period is 12 months or less, the exporter shall furnish a certification to the Treasurer, CCC... Assistant Treasurer, CCC, certifying that the commodities have been exported. The certification must include...

7 CFR 1488.9a - Evidence of export for commodities delivered before export.

Code of Federal Regulations, 2012 CFR

2012-01-01

... COMMODITIES Financing of Export Sales of Agricultural Commodities From Private Stocks Under CCC Export Credit... financial period is 12 months or less, the exporter shall furnish a certification to the Treasurer, CCC... Assistant Treasurer, CCC, certifying that the commodities have been exported. The certification must include...

7 CFR 1488.9a - Evidence of export for commodities delivered before export.

Code of Federal Regulations, 2014 CFR

2014-01-01

... COMMODITIES Financing of Export Sales of Agricultural Commodities From Private Stocks Under CCC Export Credit... financial period is 12 months or less, the exporter shall furnish a certification to the Treasurer, CCC... Assistant Treasurer, CCC, certifying that the commodities have been exported. The certification must include...

Effects of squat lift training and free weight muscle training on maximum lifting load and isolinetic peak torque of young adults without impairments.

PubMed

Yeung, S S; Ng, G Y

2000-06-01

Manual lifting is a frequent cause of back injury, and there is no evidence as to which training mode can provide the best training effect for lifting performance and muscle force. The purpose of this study was to examine the effects of a squat lift training and a free weight muscle training program on the maximum lifting load and isokinetic peak torque in subjects without known neuromuscular or musculoskeletal impairments. Thirty-six adults (20 male, 16 female) without known neuromuscular or musculoskeletal impairments participated. The subjects' mean age was 21.25 years (SD=1.16, range=20-24). Subjects were divided into 3 groups. Subjects in group 1 (n=12) performed squat lift training. Subjects in group 2 (n=12) participated in free weight resistance training of their shoulder abductors, elbow flexors, knee extensors and trunk extensors. Subjects in group 3 (n=12) served as controls. The maximum lifting load and isokinetic peak torques of the trunk extensors, knee extensors, elbow flexors, and shoulder abductors of each subject were measured before and after the study. Training was conducted on alternate days for 4 weeks, with an initial load of 80% of each subject's maximum capacity and with the load increased by 5% weekly. All groups were comparable for all measured variables before the study. After 4 weeks, subjects in groups 1 and 2 demonstrated more improvement in maximum lifting load and isokinetic peak torque of the back extensors compared with the subjects in group 3, but the 2 training groups were not different. The findings demonstrate that both squat lift and free weight resistance training are equally effective in improving the lifting load and isokinetic back extension performance of individuals without impairments.

Alterations in apparent diffusion coefficient values of the kidney during the cardiac cycle: Evaluation with ECG-triggered diffusion-weighted MR imaging.

PubMed

Ito, Katsuyoshi; Hayashida, Minoru; Kanki, Akihiko; Yamamoto, Akira; Tamada, Tsutomu; Yoshida, Koji; Tanabe, Masahiro

2018-05-17

To evaluate dynamic changes in apparent diffusion coefficient (ADC) values of the kidney at different time points during the cardiac cycle using electrocardiographic (ECG)-triggered diffusion-weighted MR imaging in normal subjects, and to elucidate the differences in ADC values between the right and left kidneys during a cardiac cycle. The study was approved by our institutional review board and informed consent was obtained from subjects. Twenty healthy volunteers who underwent ECG-triggered diffusion-weighted MR imaging of the kidney were included. The differences in ADC values of each kidney during different cardiac phases were compared. Additionally, the differences in maximum and minimum ADC values between the right and left kidney were also evaluated. ADC values in the right and left kidney changed significantly during the cardiac cycle (P < 0.00001). Maximum and minimum ADC values during the cardiac cycle of the left kidney were significantly higher (P = 0.026 and 0.017, respectively) than those of the right kidney. Maximum ADC value in the left kidney had a significantly strong positive correlation with the left renal vein ratio (r = 0.83, P < 0.00001). In the right kidney, maximum ADC showed a weakly positive correlation with the diameter of the right renal vein (r = 0.45, P = 0.048). ADC values of the kidney obtained using ECG-triggered diffusion-weighted MR imaging change significantly during the cardiac cycle. Maximum (systolic) ADC during the cardiac cycle of the left kidney was significantly higher than that of the right kidney, probably due to the anatomical difference in the renal vein. Copyright © 2018 Elsevier Inc. All rights reserved.

School Meal Programs: More Systematic Development of Specifications Could Improve the Safety of Foods Purchased through USDA's Commodity Program. Report to the Ranking Member, Committee on Education and the Workforce, House of Representatives. GAO-11-376

ERIC Educational Resources Information Center

Shames, Lisa

2011-01-01

Through its commodity program, the U.S. Department of Agriculture (USDA) provides commodity foods at no cost to schools taking part in the national school meals programs. Commodities include raw ground beef, cheese, poultry, and fresh produce. Like federal food safety agencies, the commodity program has taken steps designed to reduce microbial…

Evaluating the impact of climate policies on regional food availability and accessibility using an Integrated Assessment Model

NASA Astrophysics Data System (ADS)

Gilmore, E.; Cui, Y. R.; Waldhoff, S.

2015-12-01

Beyond 2015, eradicating hunger will remain a critical part of the global development agenda through the Sustainable Development Goals (SDG). Efforts to limit climate change through both mitigation of greenhouse gas emissions and land use policies may interact with food availability and accessibility in complex and unanticipated ways. Here, we develop projections of regional food accessibility to 2050 under the alternative futures outlined by the Shared Socioeconomic Pathways (SSPs) and under different climate policy targets and structures. We use the Global Change Assessment Model (GCAM), an integrated assessment model (IAM), for our projections. We calculate food access as the weighted average of consumption of five staples and the portion of income spend on those commodities and extend the GCAM calculated universal global producer price to regional consumer prices drawing on historical relationships of these prices. Along the SSPs, food access depends largely on expectations of increases in population and economic status. Under a more optimistic scenario, the pressures on food access from increasing demand and rising prices can be counterbalanced by faster economic development. Stringent climate policies that increase commodity prices, however, may hinder vulnerable regions, namely Sub-Saharan Africa, from achieving greater food accessibility.

Transparent and High Refractive Index Thermoplastic Polymer Glasses Using Evaporative Ligand Exchange of Hybrid Particle Fillers.

PubMed

Wang, Zongyu; Lu, Zhao; Mahoney, Clare; Yan, Jiajun; Ferebee, Rachel; Luo, Danli; Matyjaszewski, Krzysztof; Bockstaller, Michael R

2017-03-01

Development of high refractive index glasses on the basis of commodity polymer thermoplastics presents an important requisite to further advancement of technologies ranging from energy efficient lighting to cost efficient photonics. This contribution presents a novel particle dispersion strategy that enables uniform dispersion of zinc oxide (ZnO) particles in a poly(methyl methacrylate) (PMMA) matrix to facilitate hybrid glasses with inorganic content exceeding 25% by weight, optical transparency in excess of 0.8/mm, and a refractive index greater than 1.64 in the visible wavelength range. The method is based on the application of evaporative ligand exchange to synthesize poly(styrene-r-acrylonitrile) (PSAN)-tethered zinc oxide (ZnO) particle fillers. Favorable filler-matrix interactions are shown to enable the synthesis of isomorphous blends with high molecular PMMA that exhibit improved thermomechanical stability compared to that of the pristine PMMA matrix. The concurrent realization of high refractive index and optical transparency in polymer glasses by modification of a thermoplastic commodity polymer could present a viable alternative to expensive specialty polymers in applications where high costs or demands for thermomechanical stability and/or UV resistance prohibit the application of specialty polymer solutions.

Algal culture studies related to a closed ecological life support system

NASA Technical Reports Server (NTRS)

Radmer, R.; Behrens, P.; Fernandez, E.; Ollinger, O.; Howell, C.

1984-01-01

Studies on the steady-state long-term (4 month) culture of Scenedesmus obliquus algae, maintained in an annular air-lift column operated as a turbidostat, were carried out to evaluate the life-supporting possibilities of this system. Chlorophyll production and cell number as functions of the dry weight were linear at constant illumination. Productivity (measured as the product of dry weight, mg/ml, and the growth rate, ml/hr) vs. dry weight rose linearly until the cell density reached a level at which light became limiting (89 percent absorption of the photosynthetically active radiation). In the initial, linear portion of the curve, the productivity was limited by cell growth at the given light intensity. The maximum dilution rate of the system corresponded to the doubling time of 13.4 hr, about half the maximum rate, with a productivity of 80 percent of the maximum theoretical productivity. The high light utilization efficiencies were contributed by the low (10 percent of full sunlight) incident intensities.

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

46 CFR 172.087 - Cargo loading assumptions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... this subpart must be done for cargo weights and densities up to and including the maximum that is to be... condition of loading and operation, each cargo tank must be assumed to have its maximum free surface. ...

Data and performances of selected aircraft and rotorcraft

NASA Astrophysics Data System (ADS)

Filippone, Antonio

2000-11-01

The purpose of this article is to provide a synthetic and comparative view of selected aircraft and rotorcraft (nearly 300 of them) from past and present. We report geometric characteristics of wings (wing span, areas, aspect-ratios, sweep angles, dihedral/anhedral angles, thickness ratios at root and tips, taper ratios) and rotor blades (type of rotor, diameter, number of blades, solidity, rpm, tip Mach numbers); aerodynamic data (drag coefficients at zero lift, cruise and maximum absolute glide ratio); performances (wing and disk loadings, maximum absolute Mach number, cruise Mach number, service ceiling, rate of climb, centrifugal acceleration limits, maximum take-off weight, maximum payload, thrust-to-weight ratios). There are additional data on wing types, high-lift devices, noise levels at take-off and landing. The data are presented on tables for each aircraft class. A graphic analysis offers a comparative look at all types of data. Accuracy levels are provided wherever available.

Child mortality, commodity price volatility and the resource curse.

PubMed

Makhlouf, Yousef; Kellard, Neil M; Vinogradov, Dmitri

2017-04-01

Given many developing economies depend on primary commodities, the fluctuations of commodity prices may imply significant effects for the wellbeing of children. To investigate, this paper examines the relationship between child mortality and commodity price movements as reflected by country-specific commodity terms-of-trade. Employing a panel of 69 low and lower-middle income countries over the period 1970-2010, we show that commodity terms-of-trade volatility increases child mortality in highly commodity-dependent importers suggesting a type of 'scarce' resource curse. Strikingly however, good institutions appear able to mitigate the negative impact of volatility. The paper concludes by highlighting this tripartite relationship between child mortality, volatility and good institutions and posits that an effective approach to improving child wellbeing in low to lower-middle income countries will combine hedging, import diversification and improvement of institutional quality. Copyright © 2017. Published by Elsevier Ltd.

14 CFR 23.343 - Design fuel loads.

Code of Federal Regulations, 2012 CFR

2012-01-01

... zero fuel to the selected maximum fuel load. (b) If fuel is carried in the wings, the maximum allowable weight of the airplane without any fuel in the wing tank(s) must be established as “maximum zero wing... part and— (1) The structure must be designed to withstand a condition of zero fuel in the wing at limit...

14 CFR 23.343 - Design fuel loads.

Code of Federal Regulations, 2014 CFR

2014-01-01

... zero fuel to the selected maximum fuel load. (b) If fuel is carried in the wings, the maximum allowable weight of the airplane without any fuel in the wing tank(s) must be established as “maximum zero wing... part and— (1) The structure must be designed to withstand a condition of zero fuel in the wing at limit...

14 CFR 23.343 - Design fuel loads.

Code of Federal Regulations, 2011 CFR

2011-01-01

... zero fuel to the selected maximum fuel load. (b) If fuel is carried in the wings, the maximum allowable weight of the airplane without any fuel in the wing tank(s) must be established as “maximum zero wing... part and— (1) The structure must be designed to withstand a condition of zero fuel in the wing at limit...

14 CFR 23.343 - Design fuel loads.

Code of Federal Regulations, 2013 CFR

2013-01-01

... zero fuel to the selected maximum fuel load. (b) If fuel is carried in the wings, the maximum allowable weight of the airplane without any fuel in the wing tank(s) must be established as “maximum zero wing... part and— (1) The structure must be designed to withstand a condition of zero fuel in the wing at limit...

Botswana's Beef Global Commodity Chain: Explaining the Resistance to Change

ERIC Educational Resources Information Center

Ransom, Elizabeth

2011-01-01

In an era of increasing global agricultural trade, many firms and farms seek to upgrade their agricultural commodity chains to become better integrated into global markets. Utilizing a global commodity chain (GCC) approach, this analysis unravels the challenges to and the potential consequences of upgrading Botswana's beef commodity chain.…

17 CFR 190.05 - Making and taking delivery on commodity contracts.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false Making and taking delivery on... COMMISSION BANKRUPTCY § 190.05 Making and taking delivery on commodity contracts. (a) General. (1) In the..., which: (1) Permit the making and taking of delivery to fulfill a commodity futures contract for a...

17 CFR 32.1 - Scope of part 32; definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF COMMODITY OPTION TRANSACTIONS § 32.1 Scope of part 32; definitions. (a) Scope. The provisions of... commodity option transactions, shall apply to all commodity option transactions except for commodity option transactions conducted or executed on or subject to the rules of a contract market, or a foreign board of trade...

17 CFR 1.46 - Application and closing out of offsetting long and short positions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Application and closing out of offsetting long and short positions. 1.46 Section 1.46 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Miscellaneous § 1.46 Application...

31 CFR 538.525 - Payment for and financing of commercial sales of agricultural commodities, medicine, and medical...

Code of Federal Regulations, 2010 CFR

2010-07-01

... commercial sales of agricultural commodities, medicine, and medical equipment. 538.525 Section 538.525 Money... commodities, medicine, and medical equipment. (a) General license for payment terms. The following payment terms for sales, pursuant to § 538.523(a)(1), of agricultural commodities and products, medicine, and...

31 CFR 560.532 - Payment for and financing of exports and reexports of agricultural commodities, medicine, and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... and reexports of agricultural commodities, medicine, and medical devices. 560.532 Section 560.532... commodities, medicine, and medical devices. (a) General license for payment terms. The following payment terms for sales of agricultural commodities and products, medicine, and medical equipment pursuant to §§ 560...

31 CFR 560.532 - Payment for and financing of exports and reexports of agricultural commodities, medicine, and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... and reexports of agricultural commodities, medicine, and medical devices. 560.532 Section 560.532... commodities, medicine, and medical devices. (a) General license for payment terms. The following payment terms for sales of agricultural commodities and products, medicine, and medical equipment pursuant to §§ 560...

31 CFR 538.525 - Payment for and financing of commercial sales of agricultural commodities, medicine, and medical...

Code of Federal Regulations, 2011 CFR

2011-07-01

... commercial sales of agricultural commodities, medicine, and medical equipment. 538.525 Section 538.525 Money... commodities, medicine, and medical equipment. (a) General license for payment terms. The following payment terms for sales, pursuant to § 538.523(a)(1), of agricultural commodities and products, medicine, and...

49 CFR 1248.1 - Freight commodity statistics.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 9 2011-10-01 2011-10-01 false Freight commodity statistics. 1248.1 Section 1248... STATISTICS § 1248.1 Freight commodity statistics. All class I railroads, as described in § 1240.1 of this... statistics on the basis of the commodity codes named in § 1248.101. Carriers shall report quarterly on the...

17 CFR 1.39 - Simultaneous buying and selling orders of different principals; execution of, for and between...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Simultaneous buying and... Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Recordkeeping § 1.39 Simultaneous buying and selling orders of different principals...

49 CFR 1248.1 - Freight commodity statistics.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Freight commodity statistics. 1248.1 Section 1248... STATISTICS § 1248.1 Freight commodity statistics. All class I railroads, as described in § 1240.1 of this... statistics on the basis of the commodity codes named in § 1248.101. Carriers shall report quarterly on the...

Military Enlistment of Hispanic Youth. Obstacles and Opportunities

DTIC Science & Technology

2009-01-01

Weight, by Service, Height, and Gender . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.13. Allowable Body Fat Measurements, by Gender and...has higher minimum weight standards, as seen in Table 2.12. Applicants who exceed the maximum allowed weight are given a body- fat measurement to...determine if they exceed the allowable body- fat standards, as shown in Table 2.13. Despite having the most lenient weight standards, the Marine Corps has

Minimum Expected Risk Estimation for Near-neighbor Classification

DTIC Science & Technology

2006-04-01

We consider the problems of class probability estimation and classification when using near-neighbor classifiers, such as k-nearest neighbors ( kNN ...estimate for weighted kNN classifiers with different prior information, for a broad class of risk functions. Theory and simulations show how significant...the difference is compared to the standard maximum likelihood weighted kNN estimates. Comparisons are made with uniform weights, symmetric weights

A Deterministic Interfacial Cyclic Oxidation Spalling Model. Part 2; Algebraic Approximation, Descriptive Parameters, and Normalized Universal Curve

NASA Technical Reports Server (NTRS)

Smialek, James L.

2002-01-01

A cyclic oxidation interfacial spalling model has been developed in Part 1. The governing equations have been simplified here by substituting a new algebraic expression for the series (Good-Smialek approximation). This produced a direct relationship between cyclic oxidation weight change and model input parameters. It also allowed for the mathematical derivation of various descriptive parameters as a function of the inputs. It is shown that the maximum in weight change varies directly with the parabolic rate constant and cycle duration and inversely with the spall fraction, all to the 1/2 power. The number of cycles to reach maximum and zero weight change vary inversely with the spall fraction, and the ratio of these cycles is exactly 1:3 for most oxides. By suitably normalizing the weight change and cycle number, it is shown that all cyclic oxidation weight change model curves can be represented by one universal expression for a given oxide scale.

Constitutional basis of longevity in the cetacea: do the whales and the terrestrial mammals obey the same laws

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sacher, G.A.

1978-01-01

The maximum lifespans in captivity for terrestrial mammalian species can be estimated by means of a multiple linear regression of logarithm of lifespan (L) on the logarithm of adult brain weight (E) and body weight (S). This paper describes the application of regression formulas based on data from terrestrial mammals to the estimation of odontocete and mysticete lifespans. The regression formulas predict cetacean lifespans that are in accord with the data on maximum cetacean lifespans obtained in recent years by objective age determination procedures. More remarkable is the correct prediction by the regression formulas that the odontocete species have nearlymore » constant lifespans, almost independent of body weight over a 300:1 body weight range. This prediction is a consequence of the fact, remarkable in itself, that over this body weight range the Odontoceti have a brain:body allometric slope of 1/3, as compared to a slope of 2/3 for the Mammalia as a whole.« less

Availability, prices and affordability of UN Commission's lifesaving medicines for reproductive and maternal health in Uganda.

PubMed

Kibira, Denis; Kitutu, Freddy Eric; Merrett, Gemma Buckland; Mantel-Teeuwisse, Aukje K

2017-01-01

Uganda was one of seven countries in which the United Nations Commission on Life Saving Commodities (UNCoLSC) initiative was implemented starting from 2013. A nationwide survey was conducted in 2015 to determine availability, prices and affordability of essential UNCoLSC maternal and reproductive health (MRH) commodities. The survey at health facilities in Uganda was conducted using an adapted version of the standardized methodology co-developed by World Health Organisation (WHO) and Health Action International (HAI). In this study, six maternal and reproductive health commodities, that were part of the UNCoLSC initiative, were studied in the public, private and mission health sectors. Median price ratios were calculated with Management Sciences for Health International Drug Price Indicator prices as reference. Maternal and reproductive health commodity stocks were reviewed from stock cards for their availability for a period of 6 months preceding the survey. Affordability was measured using wages of the lowest paid government worker. Overall none of the six maternal and reproductive commodities was found in the surveyed health facilities. Public sector had the highest availability (52%), followed by mission sector (36%) and then private sector had the least (30%). Stock outs ranged from 7 to 21 days in public sector; 2 to 23 days in private sector and 3 to 27 days in mission sector. During the survey, maternal health commodities were more available and had less number of stock out days than reproductive health commodities. Median price ratios (MPR) indicated that medicines and commodities were more expensive in Uganda compared to international reference prices. Furthermore, MRH medicines and commodities were more expensive and less affordable in private sector compared to mission sector. Access to MRH commodities is inadequate in Uganda. Maternal health commodities were more available, cheaper and thus more affordable than reproductive health commodities in the current study. Efforts should be undertaken by the Ministry of Health and stakeholders to improve availability, prices and affordability of MRH commodities in Uganda to ensure that sustainable Development Goals are met.

Dual Fan Separator within the Universal Waste Management System

NASA Technical Reports Server (NTRS)

Stapleton, Tom; Converse, Dave; Broyan, James Lee, Jr.

2014-01-01

Since NASA's new spacecraft in development for both LEO and Deep Space capability have considerable crew volume reduction in comparison to the Space Shuttle, it is clear that NASA requires a smaller and less expensive commode. The UTAS Universal Waste Management System (UWMS) was designed to address these new constraints, resulting in an 80% volume reduction in the cabin while enhancing performance. Whereas all of the current space commodes use air flow to capture both urine and feces and separate air from the captured air/urine mixture, the UWMS commode and urine fans and the urine separator were combined into a single unit. This unit enables use of a single motor and motor controller, which provides considerable packaging and weight efficiency. In some of the intended platform applications for the UWMS, the urine is pumped to a water reclamation system. The ISS Urine Processor Assembly (UPA) system requires delivered urine to include less than 0.25% air inclusion. Air inclusion in centrifugal urine separators is greatly dependent on its rotational speed. To satisfy this requirement, a gear reducer was included, allowing the fans to rotate at a much higher speed than the separator. This new design, the Dual Fan Separator (DFS) has been designed, prototyped and tested. This paper will outline the studies and analysis performed to develop the design configuration for testing. The studies included a configuration trade study, dynamic stability analysis of the rotating bodies and a performance analysis of included labyrinth seals. NASA is considereing a program to fly the UWMS aboard the ISS as a flight experiment. The goal of the design activity is to elevate the Technical Readiness Level (TRL) of the Dual Fan Separator and determine if the concept is ready to be included in flight experiment deliverable.

Cumulative dietary exposure to a selected group of pesticides of the triazole group in different European countries according to the EFSA guidance on probabilistic modelling.

PubMed

Boon, Polly E; van Donkersgoed, Gerda; Christodoulou, Despo; Crépet, Amélie; D'Addezio, Laura; Desvignes, Virginie; Ericsson, Bengt-Göran; Galimberti, Francesco; Ioannou-Kakouri, Eleni; Jensen, Bodil Hamborg; Rehurkova, Irena; Rety, Josselin; Ruprich, Jiri; Sand, Salomon; Stephenson, Claire; Strömberg, Anita; Turrini, Aida; van der Voet, Hilko; Ziegler, Popi; Hamey, Paul; van Klaveren, Jacob D

2015-05-01

The practicality was examined of performing a cumulative dietary exposure assessment according to the requirements of the EFSA guidance on probabilistic modelling. For this the acute and chronic cumulative exposure to triazole pesticides was estimated using national food consumption and monitoring data of eight European countries. Both the acute and chronic cumulative dietary exposures were calculated according to two model runs (optimistic and pessimistic) as recommended in the EFSA guidance. The exposures obtained with these model runs differed substantially for all countries, with the highest exposures obtained with the pessimistic model run. In this model run, animal commodities including cattle milk and different meat types, entered in the exposure calculations at the level of the maximum residue limit (MRL), contributed most to the exposure. We conclude that application of the optimistic model run on a routine basis for cumulative assessments is feasible. The pessimistic model run is laborious and the exposure results could be too far from reality. More experience with this approach is needed to stimulate the discussion of the feasibility of all the requirements, especially the inclusion of MRLs of animal commodities which seem to result in unrealistic conclusions regarding their contribution to the dietary exposure. Copyright © 2014 Elsevier Ltd. All rights reserved.

Determination of benzoylurea insecticides in food by pressurized liquid extraction and LC-MS.

PubMed

Brutti, Monia; Blasco, Cristina; Picó, Yolanda

2010-01-01

A method based on pressurized liquid extraction and LC-MS/MS has been developed for determining nine benzoylureas (BUs) in fruit, vegetable, cereals, and animal products. Samples (5 g) were homogenized with diatomaceous earth and extracted in a 22 mL cell with 22 mL of ethyl acetate at 80 degrees C and 1500 psi. After solvent concentration and exchange to methanol, BUs were analyzed by LC-MS/MS using an IT mass analyzer, which achieved several transitions of precursor ions that increase selectivity providing identification. LOQs were between 0.002 and 0.01 mg/kg, which are equal or lower than maximum residue limits established by the Codex Alimentarius. Excellent linearity was achieved over a range of concentrations from 0.01 to 1 mg/kg with correlation coefficients 0.995-0.999 (n=7). Validation of the total method was performed by analyzing in quintuplicate seven different commodities (milk, eggs, meat, rice, lettuce, avocado, and lemon) at three concentration levels (0.01, 0.1, and 1 mg/kg). The recoveries ranged from 58 to 97% and the RSDs from 5 to 19% depending on the compound and the commodity. The combination of pressurized liquid extraction with LC-MS/MS provides a sensitive and selective method for the determination of BUs in food.

22 CFR 211.9 - Liability for loss damage or improper distribution of commodities.

Code of Federal Regulations, 2014 CFR

2014-04-01

... sponsors may add to the value any provable costs they have incurred prior to delivery by the ocean carrier... TRANSFER OF FOOD COMMODITIES FOR FOOD USE IN DISASTER RELIEF, ECONOMIC DEVELOPMENT AND OTHER ASSISTANCE... or damage to commodities. (See paragraph (c)(2)(iii) of this section.) (B) The value of commodities...

22 CFR 211.9 - Liability for loss damage or improper distribution of commodities.

Code of Federal Regulations, 2013 CFR

2013-04-01

... sponsors may add to the value any provable costs they have incurred prior to delivery by the ocean carrier... TRANSFER OF FOOD COMMODITIES FOR FOOD USE IN DISASTER RELIEF, ECONOMIC DEVELOPMENT AND OTHER ASSISTANCE... or damage to commodities. (See paragraph (c)(2)(iii) of this section.) (B) The value of commodities...

48 CFR 470.202 - Acquisition of commodities for United States Agency for International Development (USAID) programs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to foreign destinations and related freight to transport such commodities under Title II of Public... respect to a commodity procurement or a freight procurement will specify that in the event an offer... offer if the acceptance of another offer for the commodity or freight, when combined with other offers...

48 CFR 470.202 - Acquisition of commodities for United States Agency for International Development (USAID) programs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to foreign destinations and related freight to transport such commodities under Title II of Public... respect to a commodity procurement or a freight procurement will specify that in the event an offer... offer if the acceptance of another offer for the commodity or freight, when combined with other offers...

48 CFR 470.202 - Acquisition of commodities for United States Agency for International Development (USAID) programs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to foreign destinations and related freight to transport such commodities under Title II of Public... respect to a commodity procurement or a freight procurement will specify that in the event an offer... offer if the acceptance of another offer for the commodity or freight, when combined with other offers...

48 CFR 470.202 - Acquisition of commodities for United States Agency for International Development (USAID) programs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to foreign destinations and related freight to transport such commodities under Title II of Public... respect to a commodity procurement or a freight procurement will specify that in the event an offer... offer if the acceptance of another offer for the commodity or freight, when combined with other offers...

Economic Development Policymaking Down the Global Commodity Chain: Attracting an Auto Industry to Silao, Mexico

ERIC Educational Resources Information Center

Rothstein, Jeffrey S.

2005-01-01

This article applies the global commodity chain approach to analyze the way policymakers encouraged an automotive commodity chain to touch down in Silao, Mexico. The article explains that the changing dynamics of the global auto industry have transformed it into an "assembler-driven" commodity chain. It notes how policymakers in the…

Origin of Money: Dynamic Duality Between Necessity and Unnecessity

NASA Astrophysics Data System (ADS)

Tauchi, Yuka; Kamiura, Moto; Haruna, Taichi; Gunji, Yukio-Pegio

2008-10-01

We propose a mathematical model of economic agents to study origin of money. This multi-agent model is based on commodity theory of money, which says that a commodity used as money emerges from barter transaction. Each agent has a different value system which is given by a Heyting algebra, and exchanges one's commodities based on the value system. In each value system, necessity and unnecessity of commodities are expressed by some elements and their compliments on a Heyting Algebra. Moreover, the concept of the compliment is extended. Consequently, the duality of the necessity-unnecessity is weakened, and the exchanges of the commodities are promoted. The commodities which keeps being exchanged for a long time can correspond to money.

Effectiveness of cow manure and mycorrhiza on the growth of soybean

NASA Astrophysics Data System (ADS)

Muktiyanta, M. N. A.; Samanhudi; Yunus, A.; Pujiasmanto, B.; Minardi, S.

2018-03-01

Soybean is one of the major food crop commodities in Indonesia. The needs of soybean each year is always increasing, but the the production rate is low. The research aimed to know the influence of treatment doses of cow manure and mycorrhiza towards growth and yield of soybeans. This research was conducted using Randomized Complete Block Design with two factors. The first factor is the dose of cow manure: S0 (0 g/plot), S1 (781.25 g/plot), S2 (1562.5 g/plot), and S3 (2343.75 g/plot). The second factor is the dose of mycorrhiza: M0 (0 g/plot), M1 (100 g/plot), and M2 (200 g/plot). The observed parameters is plant height, the number of productive branches, weight of 100 seeds, root length, fresh weight of biomass, dry weight of biomass, conversion calculation results of soybeans per hectacre and the percentage of roots infected with mycorrhiza. Data were analyzed with ANOVA at 5% significance level, continued with Duncan test at 5% confidence level. The results showed that no interaction between the two treatments. Doses of cow manure provides significant influence to plant height and the length of the root. Whereas, the doses of mycorrhiza provides significant effect to the number of productive branch, weight of 100 seeds, dry weight of biomass, and the conversion of soybean yield per hectare.

Annoyance caused by propeller airplane flyover noise

NASA Technical Reports Server (NTRS)

Mccurdy, D. A.; Powell, C. A.

1984-01-01

Laboratory experiments were conducted to provide information on quantifying the annoyance response of people to propeller airplane noise. The items of interest were current noise metrics, tone corrections, duration corrections, critical band corrections, and the effects of engine type, operation type, maximum takeoff weight, blade passage frequency, and blade tip speed. In each experiment, 64 subjects judged the annoyance of recordings of propeller and jet airplane operations presented at d-weighted sound pressure levels of 70, 80, and 90 dB in a testing room which simulates the outdoor acoustic environment. The first experiment examined 11 propeller airplanes with maximum takeoff weights greater than or equal to 5700 kg. The second experiment examined 14 propeller airplanes weighting 5700 kg or less. Five jet airplanes were included in each experiment. For both the heavy and light propeller airplanes, perceived noise level and perceived level (Stevens Mark VII procedure) predicted annoyance better than other current noise metrics.

Reconnaissance investigation of water quality, bottom sediment, and biota associated with irrigation drainage in the Lower Rio Grande Valley and Laguna Atascosa National Wildlife Refuge, Texas, 1986-87

USGS Publications Warehouse

Wells, Frank C.; Jackson, Gerry A.; Rogers, William J.

1988-01-01

Toxaphene was detected in 11 fish samples; detectable concentrations ranged from 0.98 to 5.1 micrograms per gram, wet weight. DOT also was detected in 11 fish samples with concentrations ranging from 0.021 to 0.066 micrograms per gram, wet weight. ODD was detected in 21 fish samples; concentrations ranged from 0.015 to 0.16 micrograms per gram, wet weight. DDE was detected in all 22 fish samples, and concentrations ranged from 0.36 to 9.9 micrograms per gram, wet weight. The maximum concentrations of DOT and ODD exceeded the 1980-81 baseline concentrations. The median and maximum concentrations of toxaphene and DDE exceeded the 1980-81 baseline concentrations. The largest concentrations of toxaphene, ODD, and DDE in fish were all measured in samples collected at the Main Floodway near Progreso.

Commodity aspirations in Easterlin's relative income theory of fertility.

PubMed

Ahlburg, D A

1984-01-01

This paper presents the preference ordering that underlies Easterlin's relative income theory of fertility. Commodity aspirations are a key component of the theory and the paper explores how the introduction of commodity aspirations into the utility function affects the consumption of commodities and bearing of children. The formation and empirical specification of commodity aspirations are also discussed. Commodity aspirations are formed by the material environment experienced during childhood and are primarily a function of parental income. Easterlin, Leibenstein and Ben-Porath argus that it is the parental consumption or standard of living that determines the child's testes or aspirations. It is the parents' spending on themseleves rather than total parental income that can be used as a proxy for the child's commodity aspirations. Bagozzi and Van Loo identify 4 significant contributions made by Easterlinhs theory of fertility. They cite his stress on potential income flow through time as being pertinent to household decision making; tastes being an explicit determinant of fertility; background charactersticis and norms as to standards of child care and family size affecting fertility indirectly through tastes rather than directly; and the fact that relative income has an effect on fertility in addition to the influence of the absolute level of income. The number of children demanded is a negative function of commodity aspirations, as is the utility of the family. Studies of the demand for commodities and children should include data on parental resources.

17 CFR 15.00 - Definitions of terms used in parts 15 to 21 of this chapter.

Code of Federal Regulations, 2011 CFR

2011-04-01

... chapter. As used in parts 15 to 21 of this chapter: (a) Cash or Spot, when used in connection with any..., commodity pool or partnership account. (g) Discretionary account means a commodity futures or commodity... spot, single or in all-months fixed in § 150.2 of this chapter for the particular commodity and...

Methodology and User Guide for the Food Intakes Converted to Retail Commodities Databases: CSFII 1994-1996 and 1998; NHANES 1999-2000; WWEIA, NHANES 2001-2002

USDA-ARS?s Scientific Manuscript database

The purpose for developing the Food Intakes Converted to Retail Commodities Database (FICRCD) is to convert foods consumed in the national dietary surveys, 1994-2002, to respective amounts of retail-level food commodities. Food commodities are defined as those available for purchase in retail store...

17 CFR 1.1 - Fraud in or in connection with transactions in foreign currency subject to the Commodity Exchange...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Fraud in or in connection with... Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Definitions § 1.1 Fraud in or in connection with transactions in foreign currency subject to the...

Inaccuracy of a physical strain trainer for the monitoring of partial weight bearing.

PubMed

Pauser, Johannes; Jendrissek, Andreas; Swoboda, Bernd; Gelse, Kolja; Carl, Hans-Dieter

2011-11-01

To investigate the use of a physical strain trainer for the monitoring of partial weight bearing. Case series with healthy volunteers. Orthopedic clinic. Healthy volunteers (N=10) with no history of foot complaints. Volunteers were taught to limit weight bearing to 10% body weight (BW) and 50% BW, monitored by a physical strain trainer. The parameters peak pressure, maximum force, force-time integral, and pressure-time integral were assessed by dynamic pedobarography when volunteers walked with full BW (condition 1), 50% BW (condition 2), and 10% BW (condition 3). With 10% BW (condition 3), forces with normative gait (condition 1) were statistically significantly reduced under the hindfoot where the physical strain trainer is placed. All pedobarographic parameters were, however, exceeded when the total foot was measured. A limitation to 10% BW with the physical strain trainer (condition 3) was equal to a bisection of peak pressure and maximum force for the total foot with normative gait (condition 1). Halved BW (condition 2) left a remaining mean 82% of peak pressure and mean 59% of maximum force from full BW (condition 1). The concept of controlling partial weight bearing with the hindfoot-addressing device does not represent complete foot loading. Such devices may be preferably applied in cases when the hindfoot in particular must be off-loaded. Other training devices (eg, biofeedback soles) that monitor forces of the total foot have to be used to control partial weight bearing of the lower limb accurately. Copyright © 2011 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Quantifying precision of in situ length and weight measurements of fish

USGS Publications Warehouse

Gutreuter, S.; Krzoska, D.J.

1994-01-01

We estimated and compared errors in field-made (in situ) measurements of lengths and weights of fish. We made three measurements of length and weight on each of 33 common carp Cyprinus carpio, and on each of a total of 34 bluegills Lepomis macrochirus and black crappies Pomoxis nigromaculatus. Maximum total lengths of all fish were measured to the nearest 1 mm on a conventional measuring board. The bluegills and black crappies (85–282 mm maximum total length) were weighed to the nearest 1 g on a 1,000-g spring-loaded scale. The common carp (415–600 mm maximum total length) were weighed to the nearest 0.05 kg on a 20-kg spring-loaded scale. We present a statistical model for comparison of coefficients of variation of length (Cl ) and weight (Cw ). Expected Cl was near zero and constant across mean length, indicating that length can be measured with good precision in the field. Expected Cw decreased with increasing mean length, and was larger than expected Cl by 5.8 to over 100 times for the bluegills and black crappies, and by 3 to over 20 times for the common carp. Unrecognized in situ weighing errors bias the apparent content of unique information in weight, which is the information not explained by either length or measurement error. We recommend procedures to circumvent effects of weighing errors, including elimination of unnecessary weighing from routine monitoring programs. In situ weighing must be conducted with greater care than is common if the content of unique and nontrivial information in weight is to be correctly identified.

Construction Method of Display Proposal for Commodities in Sales Promotion by Genetic Algorithm

NASA Astrophysics Data System (ADS)

Yumoto, Masaki

In a sales promotion task, wholesaler prepares and presents the display proposal for commodities in order to negotiate with retailer's buyers what commodities they should sell. For automating the sales promotion tasks, the proposal has to be constructed according to the target retailer's buyer. However, it is difficult to construct the proposal suitable for the target retail store because of too much combination of commodities. This paper proposes a construction method by Genetic algorithm (GA). The proposed method represents initial display proposals for commodities with genes, improve ones with the evaluation value by GA, and rearrange one with the highest evaluation value according to the classification of commodity. Through practical experiment, we can confirm that display proposal by the proposed method is similar with the one constructed by a wholesaler.

17 CFR 3.3 - [Reserved

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 1 2013-04-01 2013-04-01 false [Reserved] 3.3 Section 3.3 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGISTRATION Registration § 3.3 [Reserved] ...

17 CFR 3.3 - [Reserved

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 1 2012-04-01 2012-04-01 false [Reserved] 3.3 Section 3.3 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION REGISTRATION Registration § 3.3 [Reserved] ...

Profitability of Using Forecasting Techniques in the Commodities Market

DTIC Science & Technology

1985-12-01

12 II. THE NATURE OF THE COMMODITIES MARKET . . . . . 13 A. FUTURES TRADING . . . . ...... . . . . . 13 B. HEDGING IN THE COMMODITIES...1984 WHEAT ........ . . . ............... . 74 j7 4’ -- S . LIST OF FIGURES 2.1 Example of a Perfect Hedge . . . . . . . . . . . . . 17 3.1 Iterative...actually results in a commodity delivery [Ref. 31. The majority of these transactions are * taken up by hedgers and speculators. B. HEDGING IN THE

Primary Commodity Dependency: A Limiting Factor for Achieving Democracy

DTIC Science & Technology

2010-03-24

two ~gricultural crops, minerals, petroleum, or fisheries can be considered primary commodity dependent. Tea, coffee, and cocoa ; peanuts and cotton...Rostow’s Development Model Pre-conditions for take-off mass consumption democracy. In 1960s, economists, associated democratization to a developmental...Commodities can be renewable or non-renewable. Petroleum, diamonds, cocoa , bananas, coffee, and timber are just a few of the commodities that have

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

49 CFR 529.6 - Requirements for final-stage manufacturers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...

Survey of Occupational Noise Exposure in CF Personnel in Selected High-Risk Trades

DTIC Science & Technology

2003-11-01

peak, maximum level , minimum level , average sound level , time weighted average, dose, projected 8-hour dose, and upper limit time were measured for...10 4.4.2 Maximum Sound Level ...11 4.4.3 Minimum Sound Level

7 CFR 247.28 - Storage and inventory of commodities.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.28 Storage and... must provide for storage of commodities that protects them from theft, spoilage, damage or destruction...

7 CFR 247.28 - Storage and inventory of commodities.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.28 Storage and... must provide for storage of commodities that protects them from theft, spoilage, damage or destruction...

7 CFR 247.28 - Storage and inventory of commodities.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.28 Storage and... must provide for storage of commodities that protects them from theft, spoilage, damage or destruction...

7 CFR 247.28 - Storage and inventory of commodities.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.28 Storage and... must provide for storage of commodities that protects them from theft, spoilage, damage or destruction...

7 CFR 247.28 - Storage and inventory of commodities.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., DEPARTMENT OF AGRICULTURE CHILD NUTRITION PROGRAMS COMMODITY SUPPLEMENTAL FOOD PROGRAM § 247.28 Storage and... must provide for storage of commodities that protects them from theft, spoilage, damage or destruction...

33 CFR 402.6 - Volume Rebate Incentive program

Code of Federal Regulations, 2010 CFR

2010-07-01

... defined under the Manager's commodity classification, for which a Volume Rebate is sought, the origin or... already move the commodity, as defined under the Manager's commodity classification, through the Seaway at...

33 CFR 402.6 - Volume Rebate Incentive program

Code of Federal Regulations, 2011 CFR

2011-07-01

... defined under the Manager's commodity classification, for which a Volume Rebate is sought, the origin or... already move the commodity, as defined under the Manager's commodity classification, through the Seaway at...

Effects of intravesical hydrostatic pressure and volume on the distensibility of the canine prostatic portion of the urethra.

PubMed

Johnston, G R; Feeney, D A; Osborne, C A; Johnston, S D; Smith, F O; Jessen, C R

1985-03-01

Positive-contrast retrograde urethrocystograms were obtained serially on 12 male dogs weighing 11.4 to 23.2 kg before, during, and after the injection of contrast medium until the urinary bladder neck and prostatic and membranous portions of the urethra remained open and distended as viewed by fluoroscopy. Correlations of intravesical volumes and pressures required to achieve maximum distension of the midprostatic portion of the urethra with body weight and surface area were not significant. Because of the variability in intravesical volumes and pressures encountered at maximum distension of the prostatic portion of the urethra, a dose of contrast material expressed relative to body weight or surface area could not be determined for consistently providing maximum distension of the prostatic portion of the urethra.

[Fishery and biometrics of genus Calappa crabs (Brachyura: Calappidae) in northeastern Venezuela].

PubMed

Alió, José J; Marcano, Luis A; Altuve, Douglas E

2005-01-01

The box crabs, genus Calappa, are important crab species landed by the industrial trawl fleet in Venezuela. These crabs have a wide distribution in the country, from the Gulf of Venezuela to the Orinoco River, but major landings take place in such gulf, near Margarita Island and northern Sucre State. Average annual landing in the eastern region was 69 t during 1970-2001, with a maximum of 221 t. For this study a sample of 2 398 box crabs was collected by observers on board of industrial trawl vessels, which operated in eastern Venezuela from 1994 to 2000. Three species were found in the landings, Calappa sulcata and C. flammea. each represented 47% of the sample, and C. nitida, which accounted for 5% of the sample. Sex ratio was strongly biased towards males in C. sulcata (2.8:1) and in C. flammnea (1.9:1). while it was only slightly biased in C. nitida (1.4:1). Due to its large size, C. sulcuta is of great commercial interest, with average weight 290 g and a maximum weight of 720 g: C. flammea showed an average weight of 140 g and a maximum weight of 418 g, while C. nitida is the smallest species, with average weight 46 g and maximum weight not beyond 113 g. Box crabs were captured by day and night in similar proportions, and were found in a wide depth range, from a few meters to 126 m deep; however, the largest captures were obtained in the interval 38 - 54 m. Regressions between weight of chelae and total weight were linear, and significantly different between sexes. The relation between total weight and carapace width was allometric, with a power exponent ca. three in C. sulcata, and less than three in C. flamea and C. nitida. Females of C. sulcata and C. nitida showed power exponents significantly smaller than males. Since claws are removed from the animal to be commercialized, while the rest of the animal is returned alive to the sea, for practical purposes a common equation among species and sexes to convert claws weight into total body weight is: total weight - 3 x claws weight. The relationship between catch per unit of effort (CPUE) and effort did not show a significantly decreasing trend, but landings follow the effort trend, with a decreasing tendency in recent years. No mature females were found in any of the three species, thus there could be reproductive migrations towards deeper waters from October to January, when abundance of crabs is lower in the study area. It is recommended that the practice of exploiting only one claw, returning the rest of the animal alive to the sea, should be promoted among fishers, while the removal of claws from female crabs should be avoided.

Imported water risk: the case of the UK

NASA Astrophysics Data System (ADS)

Hoekstra, Arjen Y.; Mekonnen, Mesfin M.

2016-05-01

While the water dependency of water-scarce nations is well understood, this is not the case for countries in temperate and humid climates, even though various studies have shown that many of such countries strongly rely on the import of water-intensive commodities from elsewhere. In this study we introduce a method to evaluate the sustainability and efficiency of the external water footprint (WF) of a country, with the UK as an example. We trace, quantify and map the UK’s direct and indirect water needs and assess the ‘imported water risk’ by evaluating the sustainability of the water consumption in the source regions. In addition, we assess the efficiency of the water consumption in source areas in order to identify the room for water savings. We find that half of the UK’s global blue WF—the direct and indirect consumption of ground- and surface water resources behind all commodities consumed in the UK—is located in places where the blue WF exceeds the maximum sustainable blue WF. About 55% of the unsustainable part of the UK’s blue WF is located in six countries: Spain (14%), USA (11%), Pakistan (10%), India (7%), Iran (6%), and South Africa (6%). Our analysis further shows that about half of the global consumptive WF of the UK’s direct and indirect crop consumption is inefficient, which means that consumptive WFs exceed specified WF benchmark levels. About 37% of the inefficient part of the UK’s consumptive WF is located in six countries: Indonesia (7%), Ghana (7%), India (7%), Brazil (6%), Spain (5%), and Argentina (5%). In some source countries, like Pakistan, Iran, Spain, USA and Egypt, unsustainable and inefficient blue water consumption coincide. We find that, by lowering overall consumptive WFs to benchmark levels, the global blue WF of UK crop consumption could be reduced by 19%. We discuss four strategies to mitigate imported water risk: become more self-sufficient in food; diversify the import of water-intensive commodities, favouring the sourcing from water-abundant regions; reconsider the import of water-intensive commodities from the regions that are most severely water stressed altogether; and collaborate internationally with source countries with unsustainable water use where opportunities exist to increase water productivity.

7 CFR 1421.112 - Foreclosure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... effected without removing the commodity from storage. The commodity may be processed before sale and CCC may become the purchaser of the whole or any part of the commodity at either a public or private sale...

7 CFR 1421.112 - Foreclosure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... effected without removing the commodity from storage. The commodity may be processed before sale and CCC may become the purchaser of the whole or any part of the commodity at either a public or private sale...

7 CFR 253.10 - Commodity control, storage and distribution.

Code of Federal Regulations, 2010 CFR

2010-01-01

... recorded. (15) Posters are conspicuously displayed advising program participants to accept only those... commodities with the same or similar kind of commodities which are sound and in good condition. The State...

7 CFR 1499.8 - Entry and handling of commodities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... entry and transit. The participant shall store and maintain the donated commodities in good condition...) Banners, posters or other media informing the public of the name and source of the donated commodities...

41 CFR 51-6.13 - Replacement and similar commodities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Public Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED 6-PROCUREMENT... desire to procure additional sizes, colors, or other variations of a commodity after the commodity is...

41 CFR 51-6.13 - Replacement and similar commodities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Public Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED 6-PROCUREMENT... desire to procure additional sizes, colors, or other variations of a commodity after the commodity is...

41 CFR 51-6.13 - Replacement and similar commodities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Public Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED 6-PROCUREMENT... desire to procure additional sizes, colors, or other variations of a commodity after the commodity is...

41 CFR 51-6.13 - Replacement and similar commodities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Public Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED 6-PROCUREMENT... desire to procure additional sizes, colors, or other variations of a commodity after the commodity is...

41 CFR 51-6.13 - Replacement and similar commodities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Public Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED 6-PROCUREMENT... desire to procure additional sizes, colors, or other variations of a commodity after the commodity is...

Data Cubes Integration in Spatial OLAP for Agricultural Commodities

NASA Astrophysics Data System (ADS)

Putri, A. I.; Sitanggang, I. S.

2017-03-01

Ministry of Agriculture Indonesia collects data of agricultural commodities in Indonesia in the annual period. Agricultural commodities data include food crops, horticulture, plantations, and livestock. The data are available in the spreadsheet format. This study developed data cubes for food crops, plantations, and livestock using the galaxy schema of data warehouse and integrated the data cubes into the SOLAP Horticulture using SpagoBI. SOLAP is useful for data analysis and data visualization. The application displays agricultural commodities data in form of crosstab and chart. This study also developed the location intelligence module that visualizes agricultural commodities data on the map. The system was tested using the black box approach. The result showed that main functions including roll up, drill down, slice, dice, and pivot work properly. This application is expected to enable users to easily obtain data summaries of agricultural commodities.

Effects of Regulation and Technology on End Uses of Nonfuel Mineral Commodities in the United States

USGS Publications Warehouse

Matos, Grecia R.

2007-01-01

The regulatory system and advancement of technologies have shaped the end-use patterns of nonfuel minerals used in the United States. These factors affected the quantities and types of materials used by society. Environmental concerns and awareness of possible negative effects on public health prompted numerous regulations that have dramatically altered the use of commodities like arsenic, asbestos, lead, and mercury. While the selected commodities represent only a small portion of overall U.S. materials use, they have the potential for harmful effects on human health or the environment, which other commodities, like construction aggregates, do not normally have. The advancement of technology allowed for new uses of mineral materials in products like high-performance computers, telecommunications equipment, plasma and liquid-crystal display televisions and computer monitors, mobile telephones, and electronic devices, which have become mainstream products. These technologies altered the end-use pattern of mineral commodities like gallium, germanium, indium, and strontium. Human ingenuity and people?s demand for different and creative services increase the demand for new materials and industries while shifting the pattern of use of mineral commodities. The mineral commodities? end-use data are critical for the understanding of the magnitude and character of these flows, assessing their impact on the environment, and providing an early warning of potential problems in waste management of products containing these commodities. The knowledge of final disposition of the mineral commodity allows better decisions as to how regulation should be tailored.

Effect of increasing truck weight on bridges.

DOT National Transportation Integrated Search

2010-09-01

Legislation has been proposed that will allow a 17,000 lb increase in the maximum gross vehicle : weight on the Interstate Highway System. This projects main goal is quantify the effect of this : increase on the internal forces to which typical sl...

21 CFR 176.300 - Slimicides.

Code of Federal Regulations, 2014 CFR

2014-04-01

...(monobromoacetoxy) ethane [CA Reg. No. 3785-34-0] At a maximum level of 0.10 pound per ton of dry weight fiber. Bis... Methylenebisthiocyanate 2-Nitrobutyl bromoacetate [CA Reg. No. 32815-96-6] At a maximum level of 0.15 pound per ton of dry.... No. 55566-30-8) Maximum use level of 84 mg/kg in the pulp slurry. The additive may also be added to...

NDARC NASA Design and Analysis of Rotorcraft - Input, Appendix 4

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2016-01-01

The NDARC code performs design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance analysis, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. The principal tasks (sizing, mission analysis, flight performance analysis) are shown in the figure as boxes with heavy borders. Heavy arrows show control of subordinate tasks. The aircraft description consists of all the information, input and derived, that denes the aircraft. The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. This information can be the result of the sizing task; can come entirely from input, for a fixed model; or can come from the sizing task in a previous case or previous job. The aircraft description information is available to all tasks and all solutions. The sizing task determines the dimensions, power, and weight of a rotorcraft that can perform a specified set of design conditions and missions. The aircraft size is characterized by parameters such as design gross weight, weight empty, rotor radius, and engine power available. The relations between dimensions, power, and weight generally require an iterative solution. From the design flight conditions and missions, the task can determine the total engine power or the rotor radius (or both power and radius can be fixed), as well as the design gross weight, maximum takeoff weight, drive system torque limit, and fuel tank capacity. For each propulsion group, the engine power or the rotor radius can be sized. Missions are defined for the sizing task, and for the mission performance analysis. A mission consists of a number of mission segments, for which time, distance, and fuel burn are evaluated. For the sizing task, certain missions are designated to be used for design gross weight calculations; for transmission sizing; and for fuel tank sizing. The mission parameters include mission takeoff gross weight and useful load. For specified takeoff fuel weight with adjustable segments, the mission time or distance is adjusted so the fuel required for the mission equals the takeoff fuel weight. The mission iteration is on fuel weight or energy. Flight conditions are specified for the sizing task, and for the flight performance analysis. For the sizing task, certain flight conditions are designated to be used for design gross weight calculations; for transmission sizing; for maximum takeoff weight calculations; and for anti-torque or auxiliary thrust rotor sizing. The flight condition parameters include gross weight and useful load. For flight conditions and mission takeoff, the gross weight can be maximized, such that the power required equals the power available. A flight state is defined for each mission segment and each flight condition. The aircraft performance can be analyzed for the specified state, or a maximum effort performance can be identified. The maximum effort is specified in terms of a quantity such as best endurance or best range, and a variable such as speed, rate of climb, or altitude.

Worldwide Regulations of Standard Values of Pesticides for Human Health Risk Control: A Review.

PubMed

Li, Zijian; Jennings, Aaron

2017-07-22

Abstract : The impact of pesticide residues on human health is a worldwide problem, as human exposure to pesticides can occur through ingestion, inhalation, and dermal contact. Regulatory jurisdictions have promulgated the standard values for pesticides in residential soil, air, drinking water, and agricultural commodity for years. Until now, more than 19,400 pesticide soil regulatory guidance values (RGVs) and 5400 pesticide drinking water maximum concentration levels (MCLs) have been regulated by 54 and 102 nations, respectively. Over 90 nations have provided pesticide agricultural commodity maximum residue limits (MRLs) for at least one of the 12 most commonly consumed agricultural foods. A total of 22 pesticides have been regulated with more than 100 soil RGVs, and 25 pesticides have more than 100 drinking water MCLs. This research indicates that those RGVs and MCLs for an individual pesticide could vary over seven (DDT drinking water MCLs), eight (Lindane soil RGVs), or even nine (Dieldrin soil RGVs) orders of magnitude. Human health risk uncertainty bounds and the implied total exposure mass burden model were applied to analyze the most commonly regulated and used pesticides for human health risk control. For the top 27 commonly regulated pesticides in soil, there are at least 300 RGVs (8% of the total) that are above all of the computed upper bounds for human health risk uncertainty. For the top 29 most-commonly regulated pesticides in drinking water, at least 172 drinking water MCLs (5% of the total) exceed the computed upper bounds for human health risk uncertainty; while for the 14 most widely used pesticides, there are at least 310 computed implied dose limits (28.0% of the total) that are above the acceptable daily intake values. The results show that some worldwide standard values were not derived conservatively enough to avoid human health risk by the pesticides, and that some values were not computed comprehensively by considering all major human exposure pathways.

Worldwide Regulations of Standard Values of Pesticides for Human Health Risk Control: A Review

PubMed Central

Jennings, Aaron

2017-01-01

The impact of pesticide residues on human health is a worldwide problem, as human exposure to pesticides can occur through ingestion, inhalation, and dermal contact. Regulatory jurisdictions have promulgated the standard values for pesticides in residential soil, air, drinking water, and agricultural commodity for years. Until now, more than 19,400 pesticide soil regulatory guidance values (RGVs) and 5400 pesticide drinking water maximum concentration levels (MCLs) have been regulated by 54 and 102 nations, respectively. Over 90 nations have provided pesticide agricultural commodity maximum residue limits (MRLs) for at least one of the 12 most commonly consumed agricultural foods. A total of 22 pesticides have been regulated with more than 100 soil RGVs, and 25 pesticides have more than 100 drinking water MCLs. This research indicates that those RGVs and MCLs for an individual pesticide could vary over seven (DDT drinking water MCLs), eight (Lindane soil RGVs), or even nine (Dieldrin soil RGVs) orders of magnitude. Human health risk uncertainty bounds and the implied total exposure mass burden model were applied to analyze the most commonly regulated and used pesticides for human health risk control. For the top 27 commonly regulated pesticides in soil, there are at least 300 RGVs (8% of the total) that are above all of the computed upper bounds for human health risk uncertainty. For the top 29 most-commonly regulated pesticides in drinking water, at least 172 drinking water MCLs (5% of the total) exceed the computed upper bounds for human health risk uncertainty; while for the 14 most widely used pesticides, there are at least 310 computed implied dose limits (28.0% of the total) that are above the acceptable daily intake values. The results show that some worldwide standard values were not derived conservatively enough to avoid human health risk by the pesticides, and that some values were not computed comprehensively by considering all major human exposure pathways. PMID:28737697

Statistical field theory of futures commodity prices

NASA Astrophysics Data System (ADS)

Baaquie, Belal E.; Yu, Miao

2018-02-01

The statistical theory of commodity prices has been formulated by Baaquie (2013). Further empirical studies of single (Baaquie et al., 2015) and multiple commodity prices (Baaquie et al., 2016) have provided strong evidence in support the primary assumptions of the statistical formulation. In this paper, the model for spot prices (Baaquie, 2013) is extended to model futures commodity prices using a statistical field theory of futures commodity prices. The futures prices are modeled as a two dimensional statistical field and a nonlinear Lagrangian is postulated. Empirical studies provide clear evidence in support of the model, with many nontrivial features of the model finding unexpected support from market data.

Choosing a commode for the ward environment.

PubMed

Ballinger, C; Pain, H; Pascoe, J; Gore, S

The choice of appropriate equipment to promote patient independence and enhance nursing care is of major concern to the nurse in the ward environment. This article reports on a recent evaluation of specialist commodes, (Ballinger et al, 1994), with reference to the programme funded by the Medical Devices Agency, Department of Health, under whose auspices the project was carried out. The results of user evaluations and technical tests of six mobile commodes are presented, the preferred model being the Mayfair commode supplied by Carters (J&A) Ltd. The article concludes by identifying a number of important considerations to bear in mind when selecting a commode.

The NACA Impact Basin and Water Landing Tests of a Float Model at Various Velocities and Weights

NASA Technical Reports Server (NTRS)

Batterson, Sidney A

1944-01-01

The first data obtained in the United States under the controlled testing conditions necessary for establishing relationships among the numerous parameters involved when a float having both horizontal and vertical velocity contacts a water surface are presented. The data were obtained at the NACA impact basin. The report is confined to a presentation of the relationship between resultant velocity and impact normal acceleration for various float weights when all other parameters are constant. Analysis of the experimental results indicated that the maximum impact normal acceleration was proportional to the square of the resultant velocity, that increases in float weight resulted in decreases in the maximum impact normal acceleration, and that an increase in the flight-path angle caused increased impact normal acceleration.

7 CFR 1599.8 - Entry and handling of commodities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... approvals for entry and transit. The participant shall store and maintain the donated commodities in good...) Banners, posters or other media informing the public of the name and source of the donated commodities...

17 CFR 42.1 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false [Reserved] 42.1 Section 42.1 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION ANTI-MONEY LAUNDERING, TERRORIST FINANCING General Provisions § 42.1 [Reserved] ...

78 FR 50040 - Technology Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... COMMODITY FUTURES TRADING COMMISSION Technology Advisory Committee AGENCY: Commodity Futures Trading Commission. ACTION: Notice of Meeting of Technology Advisory Committee. SUMMARY: The Commodity Futures Trading Commission (CFTC) announces that on September 12, 2013, the CFTC's Technology Advisory...

16 CFR Appendix to Part 460 - Exemptions

Code of Federal Regulations, 2011 CFR

2011-01-01

... relationship between R-value and density or weight per square foot are exempted from the requirements in §§ 460.12(b)(2) and 460.13(c)(1) that they disclose minimum weight per square foot for R-values listed on... sheets of the maximum weight per square foot for each R-value required to be listed. 46 FR 22179 (1981...

16 CFR Appendix to Part 460 - Exemptions

Code of Federal Regulations, 2010 CFR

2010-01-01

... relationship between R-value and density or weight per square foot are exempted from the requirements in §§ 460.12(b)(2) and 460.13(c)(1) that they disclose minimum weight per square foot for R-values listed on... sheets of the maximum weight per square foot for each R-value required to be listed. 46 FR 22179 (1981...

Military Enlistment of Hispanic Youth: Obstacles and Opportunities

DTIC Science & Technology

2008-01-01

17 2.13. Allowable Body Fat Measurements, by Gender and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3.1...exceed the maximum allowed weight are given a body- fat measurement to determine if they exceed the allowable body- fat standards, as shown in Table 2.13...Despite having the most lenient weight standards, the Marine Corps has the most restrictive body- fat requirements. For complete height and weight

Posterior Shift of Contact Point between Femoral Component and Polyethylene in the LCS Rotating Platform Implant under Weight Bearing Condition.

PubMed

Oh, Won Seok; Lee, Yong Seuk; Kim, Byung Kak; Sim, Jae Ang; Lee, Beom Koo

2016-06-01

To analyze the contact mechanics of the femoral component and polyethylene of the Low Contact Stress rotating platform (LCS-RP) in nonweight bearing and weight bearing conditions using full flexion lateral radiographs. From May 2009 to December 2013, 58 knees in 41 patients diagnosed with osteoarthritis and treated with total knee arthroplasty (TKA) were included in this study. TKA was performed using an LCS-RP knee prosthesis. Full flexion lateral radiographs in both weight bearing and nonweight bearing condition were taken at least one month postoperatively (average, 28.8 months). Translation of femoral component was determined by the contact point between the femoral component and polyethylene. Maximum flexion was measured as the angle between the lines drawn at the midpoint of the femur and tibia. Posterior shift of the contact point in LCS-RP TKA was observed under weight bearing condition, which resulted in deeper flexion compared to LCS-RP TKA under nonweight bearing condition. In the LCS-RP TKA, the contact point between the femoral component and polyethylene moved posteriorly under weight bearing condition, and the joint was more congruent and maximum flexion increased with weight bearing.

Weighted reciprocal of temperature, weighted thermal flux, and their applications in finite-time thermodynamics.

PubMed

Sheng, Shiqi; Tu, Z C

2014-01-01

The concepts of weighted reciprocal of temperature and weighted thermal flux are proposed for a heat engine operating between two heat baths and outputting mechanical work. With the aid of these two concepts, the generalized thermodynamic fluxes and forces can be expressed in a consistent way within the framework of irreversible thermodynamics. Then the efficiency at maximum power output for a heat engine, one of key topics in finite-time thermodynamics, is investigated on the basis of a generic model under the tight-coupling condition. The corresponding results have the same forms as those of low-dissipation heat engines [ M. Esposito, R. Kawai, K. Lindenberg and C. Van den Broeck Phys. Rev. Lett. 105 150603 (2010)]. The mappings from two kinds of typical heat engines, such as the low-dissipation heat engine and the Feynman ratchet, into the present generic model are constructed. The universal efficiency at maximum power output up to the quadratic order is found to be valid for a heat engine coupled symmetrically and tightly with two baths. The concepts of weighted reciprocal of temperature and weighted thermal flux are also transplanted to the optimization of refrigerators.

Food commodity pipeline management in transitional settings: challenges and lessons learned from the first USAID food development program in South Sudan

PubMed Central

Tappis, Hannah; Doocy, Shannon; Amoako, Stephen

2013-01-01

ABSTRACT Despite decades of support for international food assistance programs by the U.S. Agency for International Development (USAID) Office of Food for Peace, relatively little is known about the commodity pipeline and management issues these programs face in post-conflict and politically volatile settings. Based on an audit of the program's commodity tracking system and interviews with 13 key program staff, this case study documents the experiences of organizations implementing the first USAID-funded non-emergency (development) food assistance program approved for Sudan and South Sudan. Key challenges and lessons learned in this experience about food commodity procurement, transport, and management may help improve the design and implementation of future development food assistance programs in a variety of complex, food-insecure settings around the world. Specifically, expanding shipping routes in complex political situations may facilitate reliable and timely commodity delivery. In addition, greater flexibility to procure commodities locally, rather than shipping U.S.-procured commodities, may avoid unnecessary shipping delays and reduce costs. PMID:25276532

Can flexibility help you float?

NASA Astrophysics Data System (ADS)

Burton, L. J.; Bush, J. W. M.

2012-10-01

We consider the role of flexibility in the weight-bearing characteristics of bodies floating at an interface. Specifically, we develop a theoretical model for a two-dimensional thin floating plate that yields the maximum stable plate load and optimal stiffness for weight support. Plates small relative to the capillary length are primarily supported by surface tension, and their weight-bearing potential does not benefit from flexibility. Above a critical size comparable to the capillary length, flexibility assists interfacial flotation. For plates on the order of and larger than the capillary length, deflection from an initially flat shape increases the force resulting from hydrostatic pressure, allowing the plate to support a greater load. In this large plate limit, the shape that bears the most weight is a semicircle, which displaces the most fluid above the plate for a fixed plate length. Exact results for maximum weight-bearing plate shapes are compared to analytic approximations made in the limits of large and small plate sizes. The value of flexibility for floating to a number of biological organisms is discussed in light of our study.

Accuracy of maximum likelihood and least-squares estimates in the lidar slope method with noisy data.

PubMed

Eberhard, Wynn L

2017-04-01

The maximum likelihood estimator (MLE) is derived for retrieving the extinction coefficient and zero-range intercept in the lidar slope method in the presence of random and independent Gaussian noise. Least-squares fitting, weighted by the inverse of the noise variance, is equivalent to the MLE. Monte Carlo simulations demonstrate that two traditional least-squares fitting schemes, which use different weights, are less accurate. Alternative fitting schemes that have some positive attributes are introduced and evaluated. The principal factors governing accuracy of all these schemes are elucidated. Applying these schemes to data with Poisson rather than Gaussian noise alters accuracy little, even when the signal-to-noise ratio is low. Methods to estimate optimum weighting factors in actual data are presented. Even when the weighting estimates are coarse, retrieval accuracy declines only modestly. Mathematical tools are described for predicting retrieval accuracy. Least-squares fitting with inverse variance weighting has optimum accuracy for retrieval of parameters from single-wavelength lidar measurements when noise, errors, and uncertainties are Gaussian distributed, or close to optimum when only approximately Gaussian.

14 CFR 27.787 - Cargo and baggage compartments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Personnel and Cargo... for its placarded maximum weight of contents and for the critical load distributions at the... authorized weight of cargo and baggage at the critical loading distribution. (d) If cargo compartment lamps...

21 CFR 177.1520 - Olefin polymers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components... (expressed as percent by weight of the polymer) in N-hexane at specified temperatures Maximum soluble fraction (expressed as percent by weight of polymer) in xylene at specified temperatures 1.1a...

21 CFR 177.1520 - Olefin polymers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components... (expressed as percent by weight of the polymer) in N-hexane at specified temperatures Maximum soluble fraction (expressed as percent by weight of polymer) in xylene at specified temperatures 1.1a...

2002 economic census : transportation : 2002 commodity flow survey : exports

DOT National Transportation Integrated Search

2005-03-01

This report contains background information on the 2002 Commodity Flow Survey and then presents : detailed tabular results on shipment characteristics by mode of transportation, commodity, : and geography. In Appendix A, key characteristics of the 20...

1993 commodity flow survey : state summaries

DOT National Transportation Integrated Search

1997-06-01

This report summarizes the Commodity Flow Survey (CFS) state reports released between February 1996 and July 1996 by the Bureau of the Census and the 1993 Commodity Flow Survey: Preliminary Observations by the Bureau of Transportation Statistics. Inf...

Fracture mechanics technology for optimum pressure vessel design.

NASA Technical Reports Server (NTRS)

Bjeletich, J. G.; Morton, T. M.

1973-01-01

A technique has been developed to design a maximum efficiency reliable pressure vessel of given geometry and service life. The technique for ensuring reliability of the minimum weight vessel relies on the application of linear elastic fracture mechanics and fracture mechanics concepts. The resultant design incorporates potential fatigue and stress corrosion crack extension during service of a worst case initial flaw. Maximum stress for safe life is specified by the design technique, thereby minimizing weight. Ratios of pressure and toughness parameters are employed to avoid arbitrary specification of design stress level which would lead to a suboptimum design.

Better Decomposition Heuristics for the Maximum-Weight Connected Graph Problem Using Betweenness Centrality

NASA Astrophysics Data System (ADS)

Yamamoto, Takanori; Bannai, Hideo; Nagasaki, Masao; Miyano, Satoru

We present new decomposition heuristics for finding the optimal solution for the maximum-weight connected graph problem, which is known to be NP-hard. Previous optimal algorithms for solving the problem decompose the input graph into subgraphs using heuristics based on node degree. We propose new heuristics based on betweenness centrality measures, and show through computational experiments that our new heuristics tend to reduce the number of subgraphs in the decomposition, and therefore could lead to the reduction in computational time for finding the optimal solution. The method is further applied to analysis of biological pathway data.

Critical mineral resources of the United States—An introduction

USGS Publications Warehouse

Schulz, Klaus J.; DeYoung, John H.; Seal, Robert R.; Bradley, Dwight C.; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

2017-12-19

Many changes have taken place in the mineral resource sector since the publication by the U.S. Geological Survey of Professional Paper 820, “United States Mineral Resources,” which is a review of the long-term United States resource position for 65 mineral commodities or commodity groups. For example, since 1973, the United States has continued to become increasingly dependent on imports to meet its demands for an increasing number of mineral commodities. The global demand for mineral commodities is at an alltime high and is expected to continue to increase, and the development of new technologies and products has led to the use of a greater number of mineral commodities in increasing quantities to the point that, today, essentially all naturally occurring elements have several significant industrial uses. Although most mineral commodities are present in sufficient amounts in the earth to provide adequate supplies for many years to come, their availability can be affected by such factors as social constraints, politics, laws, environmental regulations, land-use restrictions, economics, and infrastructure.This volume presents updated reviews of 23 mineral commodities and commodity groups viewed as critical to a broad range of existing and emerging technologies, renewable energy, and national security. The commodities or commodity groups included are antimony, barite, beryllium, cobalt, fluorine, gallium, germanium, graphite, hafnium, indium, lithium, manganese, niobium, platinum-group elements, rare-earth elements, rhenium, selenium, tantalum, tellurium, tin, titanium, vanadium, and zirconium. All these commodities have been listed as critical and (or) strategic in one or more of the recent studies based on assessed likelihood of supply interruption and the possible cost of such a disruption to the assessor. For some of the minerals, current production is limited to only one or a few countries. For many, the United States currently has no mine production or any significant identified resources and is largely dependent on imports to meet its needs. As a result, the emphasis in this volume is on the global distribution and availability of each mineral commodity. The environmental issues related to production of each mineral commodity, including current mitigation and remediation approaches to deal with these challenges, are also addressed.This introductory chapter provides an overview of the mineral resource classifications, terms, and definitions used in this volume. A review of the history of the use and meaning of the term “critical” minerals (or materials) is included as an appendix to the chapter.

Exploring the meaning of excess child weight and health: shared viewpoints of Mexican parents of preschool children.

PubMed

Small, Leigh; Melnyk, Bernadette Mazurek; Anderson-Gifford, Deborah; Hampl, Jeffrey S

2009-01-01

In the United States, the prevalence of childhood overweight and obesity has reached epidemic levels, with U.S. Hispanic children, a sub-group mainly composed of children of Mexican decent, disproportionately affected. Prior research has suggested that Mexican parents may view overweight in early childhood as desirable; however, it is unclear if this is still the case. Therefore, this qualitative study explored the beliefs of 11 Mexican parents of preschoolers regarding weight and health. Following coding and clustering of themes from the transcribed audio-recorded meetings, six patterns were identified: (a) meanings and relationships about excess weight in childhood and child health, (b) causes of overweight and obesity, (c) uncertainty about knowing and not knowing, (d) from Mexico to America: enticements of a new land and time as a commodity, (e) the effects of society on personal and parental goals: the work of parenting in the United States, and (f) identified needs and action strategies. In summary, parents involved in this group discussion readily associated overweight/obesity with poor mental and physical health; however, they were uncertain how they would "know" if their children were overweight.

Marijuana and tobacco cigarettes: Estimating their behavioral economic relationship using purchasing tasks.

PubMed

Peters, Erica N; Rosenberry, Zachary R; Schauer, Gillian L; O'Grady, Kevin E; Johnson, Patrick S

2017-06-01

Although marijuana and tobacco are commonly coused, the nature of their relationship has not been fully elucidated. Behavioral economics has characterized the relationship between concurrently available commodities but has not been applied to marijuana and tobacco couse. U.S. adults ≥18 years who coused marijuana and tobacco cigarettes were recruited via Mechanical Turk, a crowdsourcing service by Amazon. Participants (N = 82) completed online purchasing tasks assessing hypothetical marijuana or tobacco cigarette puff consumption across a range of per-puff prices; 2 single-commodity tasks assessed these when only 1 commodity was available, and 2 cross-commodity tasks assessed these in the presence of a concurrently available fixed-price commodity. Purchasing tasks generated measures of demand elasticity, that is, sensitivity of consumption to prices. In single-commodity tasks, consumption of tobacco cigarette puffs (elasticity of demand: α = 0.0075; 95% confidence interval [0.0066, 0.0085], R² = 0.72) and of marijuana puffs (α = .0044; 95% confidence interval [0.0038, 0.0049], R² = 0.71) declined significantly with increases in price per puff. In cross-commodity tasks when both tobacco cigarette puffs and marijuana puffs were available, demand for 1 commodity was independent of price increases in the other commodity (ps > .05). Results revealed that, in this small sample, marijuana and tobacco cigarettes did not substitute for each other and did not complement each other; instead, they were independent of each other. These preliminary results can inform future studies assessing the economic relationship between tobacco and marijuana in the quickly changing policy climate in the United States. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Inspection report: the Department of Energy's export licensing process for dual-use and munitions commodities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedman, Gregory H.

1999-05-01

Export of commodities, encouraged by both the private sector and the Federal Government, helps to improve our position in the global economy and is in the national interest of the US. However, exports of commodities or technologies, without regard to whether they may significantly contribute to the military potential of individual countries or combination of countries or enhance the proliferation of weapons of mass destruction, may adversely affect the national security of the US. The Federal Government, therefore, implements several laws, Executive Orders, and regulations to control the export of certain commodities and technologies. These commodities and technologies require amore » license for export. Some of the controlled items are designated as ''dual-use,'' that is, commodities and technologies that have both civilian and military application. Some dual-use commodities are designated as ''nuclear dual-use''--items controlled for nuclear nonproliferation purposes. Another group of controlled commodities is designated as munitions, which are goods and technologies that have solely military uses. The Department of Energy (Energy) conducts reviews of export license applications for nuclear dual-use items and certain munitions. On August 26, 1998, the Chairman of the Senate Committee on Governmental Affairs requested that the Inspectors General from the Departments of Commerce, Defense, Energy, State, and Treasury, and the Central Intelligence Agency (CIA), update and expand on a 1993 interagency review conducted by the Inspectors General of the Departments of Commerce, Defense, Energy, and State of the export licensing processes for dual-use and munitions commodities.« less

Effect of clothing weight on body weight.

PubMed

Whigham, L D; Schoeller, D A; Johnson, L K; Atkinson, R L

2013-01-01

In clinical settings, it is common to measure weight of clothed patients and estimate a correction for the weight of clothing, but we can find no papers in the medical literature regarding the variability in clothing weight of adults with weather, season and gender. Fifty adults (35 women) were weighed four times during a 12-month period with and without clothing. Clothing weights were determined and regressed against minimum, maximum and average daily outdoor temperature. The average clothing weight (±s.d.) throughout the year was significantly greater in men than in women (1.2±0.3 vs 0.8±0.3 kg, P<0.0001). The average within-person minimum and the average within-person maximum clothing weights across the year were 0.9±0.2 and 1.5±0.4 kg for men, and 0.5±0.2 and 1.1±0.4 kg for women, respectively. The within-person s.d. in clothing weight was 0.3 kg for both men and women. Over the 55 °C range in the lowest to the highest outdoor temperatures, the regressions predicted a maximal change in clothing weight of only 0.4 kg in women and 0.6 kg in men. The clothing weight of men is significantly greater than that of women, but there is little variability throughout the year. Therefore, a clothing adjustment of approximately 0.8 kg for women and 1.2 kg for men is appropriate regardless of outdoor temperature.

A Space Commodities Futures Trading Exchange to Grow the Lunar Economy

NASA Astrophysics Data System (ADS)

Cahan, B. B. C.

2017-10-01

This paper proposes to establish a Space Commodities Futures Trading Exchange in order to define and trade essential commodities that, when traded on an open exchange, improve availability, quality, price discovery, financeability, and equal access.

17 CFR Appendix C to Part 145 - [Reserved

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false [Reserved] C Appendix C to Part 145 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMISSION RECORDS AND INFORMATION Appendix C to Part 145 [Reserved] ...