From macro- to microplastics - Analysis of EU regulation along the life cycle of plastic bags.

PubMed

Steensgaard, Ida M; Syberg, Kristian; Rist, Sinja; Hartmann, Nanna B; Boldrin, Alessio; Hansen, Steffen Foss

2017-05-01

Plastic pollution and its environmental effects has received global attention the recent years. However, limited attention has so far been directed towards how plastics are regulated in a life cycle perspective and how regulatory gaps can be addressed in order to limit and prevent environmental exposure and hazards of macro- and microplastics. In this paper, we map European regulation taking outset in the life cycle perspective of plastic carrier bags: from plastic bag production to when it enters the environment. Relevant regulatory frameworks, directives and authorities along the life cycle are identified and their role in regulation of plastics is discussed. Most important regulations were identified as: the EU chemical Regulation, the Packaging and Packaging Waste Directive including the amending Directive regarding regulation of the consumption of lightweight plastic carrier bags, the Waste Framework Directive and the Directive on the Landfill of Waste. The main gaps identified relate to lack of clear definitions of categories of polymers, unambitious recycling rates and lack of consideration of macro- and microplastics in key pieces of legislation. We recommend that polymers are categorized according to whether they are polymers with the same monomer constituents (homopolymers) or with different monomer constituents (copolymers) and that polymers are no longer exempt from registration and evaluation under REACH. Plastics should furthermore have the same high level of monitoring and reporting requirements as hazardous waste involving stricter requirements to labelling, recordkeeping, monitoring and control over the whole lifecycle. Finally, we recommend that more ambitious recycle and recovery targets are set across the EU. Regulation of the consumption of lightweight plastic carrier bags should also apply to heavyweight plastic carrier bags. Last, the Marine and Water Framework Directives should specifically address plastic waste affecting water quality. Copyright © 2017 Elsevier Ltd. All rights reserved.

Synchronizable Series Expressions. Part 1. User’s Manual for the OSS Macro Package.

DTIC Science & Technology

1987-11-01

and prognS are often used in such a wav that ant Oss serlv, grat uitonisl% ends tip as, the ret urn valute. For examiple. the iii ai itI rit ent of...as j)0sSIbI1l. -11hi akes it straighitforwa~rd to midi (ert arid thle interaction of the, jIe-cffect,, wilit a sigeniapi)ed subexpression. Several

Optimization of Laminated Composite Plates

DTIC Science & Technology

1989-09-01

plane loads has already been studied, and a number of technical publications and software packages can be found. In the present report, an optimization of...described above. There is no difficulty in any case, and comercial software , from personal computers to macro- systems, is available. In the chapter...Reforzado y su Aplicacion a los Medios de Transporte", Ph.D. University of Zaragoza, Spain, 1984. 77. Miravete A., "Caracterisation et mise au Point d’un

Efficiency improvement of dentistry clinics: introducing an intervening package for dentistry clinics, isfahan, iran.

PubMed

Alaghemandan, Hamed; Yarmohammadian, Mohammad H; Khorasani, Elahe; Rezaee, Sobhan

2014-02-01

In Isfahan, the second metropolitan in Iran, there are 1448 dentistry treatment centers that most of them are inefficient. Today, efficiency is the most important issue in health care centers as well as dentistry clinics. The goal of this research is to investigate the affordability and efficiency of dentistry clinics in Isfahan province, Iran. The current work is a quantitative research, designed in three methodological steps, including two surveys and experimental studies, for understanding current deficiencies of Iranian dentistry clinics. First, we ran a survey. Then, we analyzed the results of the questionnaires which guided us to find a particular intervening package to improve the efficiency of the clinics. At the second step, we chose an inefficient clinic named Mohtasham (Iran, Isfahan) to evaluate our intervening package. Based on what the interviewees answered, we mention the most important issues to be considered for improving the efficiency of dental clinics in Isfahan. By considering mentioned problematic issues, an intervening package was designed. This intervening package was applied in Mohtasham clinic, since June 2010. It improved the clinic's income from 16328 US$ with 4125 clients in 2010, to 420,000 US$ with 14784 patients in 2012. The proposed intervening package changed this clinic to an efficient and economic one. Its income increased 5.08 times and its patient's numbers grew 4.01 times simultaneously. In other words, Mohtasham's experience demonstrates the reliability of the package and its potentiality to be applied in macro level to improve other dentistry clinics.

Preliminary analysis techniques for ring and stringer stiffened cylindrical shells

NASA Technical Reports Server (NTRS)

Graham, J.

1993-01-01

This report outlines methods of analysis for the buckling of thin-walled circumferentially and longitudinally stiffened cylindrical shells. Methods of analysis for the various failure modes are presented in one cohesive package. Where applicable, more than one method of analysis for a failure mode is presented along with standard practices. The results of this report are primarily intended for use in launch vehicle design in the elastic range. A Microsoft Excel worksheet with accompanying macros has been developed to automate the analysis procedures.

Astrobib: A Literature Referencing System Compatible with the AAS/WGAS Latex Macros

NASA Astrophysics Data System (ADS)

Ferguson, H. C.

1993-12-01

Perhaps the most tedious part of preparing an article is dealing with the references: keeping track of which have been cited and formatting the reference section at the end of the paper in accordance with a particular journal's requirements. This package aims to simplify this task, while remaining compatible with the AAS/WGAS latex macros (as well as the latex styles distributed by A&A and MNRAS). For lack of a better name, we call this package Astrobib. The astrobib package can be used on two levels. The first uses the standard ``bibtex'' software to collect all the references cited in the text and format the reference list at the end of the paper according to the style requirements of the Journal. All we have done here is to modify the public-domain ``chicago.bst'' bibtex styles to produce citations in the formats required by ApJ, AJ, A&A, MNRAS, and PASP. All implement, to first order, the formats for references specified in 1992 or 1993 ``Instructions to Authors'' of the different journals. If the paper is rejected by MNRAS, changing three lines will allow it to be printed in ApJ format. The second level overcomes two drawbacks bibtex: the tedious use of braces and commas in bibliography database and the requirement that the author remember citation keys, typically constructed of the authors' initials and the date. With Astrobib the bibliography is kept in a much simpler database (based on the Unix `refer' style) and a couple of Unix-specific programs parse the database into bibtex format and preprocess the text to convert ``loose'' citations into bibtex citation keys. Loose citations allow the author to cite just a few authors (in any order) and perhaps the year or a word of the title of the conference proceedings. Documentation and instructions for electronic access to the package will be available at the meeting. Support for this work was provided by the SERC and by NASA through grant HF1043 awarded by the STScI which is operated by AURA, Inc., for NASA under contract NAS5-26555.

[MapDraw: a microsoft excel macro for drawing genetic linkage maps based on given genetic linkage data].

PubMed

Liu, Ren-Hu; Meng, Jin-Ling

2003-05-01

MAPMAKER is one of the most widely used computer software package for constructing genetic linkage maps.However, the PC version, MAPMAKER 3.0 for PC, could not draw the genetic linkage maps that its Macintosh version, MAPMAKER 3.0 for Macintosh,was able to do. Especially in recent years, Macintosh computer is much less popular than PC. Most of the geneticists use PC to analyze their genetic linkage data. So a new computer software to draw the same genetic linkage maps on PC as the MAPMAKER for Macintosh to do on Macintosh has been crying for. Microsoft Excel,one component of Microsoft Office package, is one of the most popular software in laboratory data processing. Microsoft Visual Basic for Applications (VBA) is one of the most powerful functions of Microsoft Excel. Using this program language, we can take creative control of Excel, including genetic linkage map construction, automatic data processing and more. In this paper, a Microsoft Excel macro called MapDraw is constructed to draw genetic linkage maps on PC computer based on given genetic linkage data. Use this software,you can freely construct beautiful genetic linkage map in Excel and freely edit and copy it to Word or other application. This software is just an Excel format file. You can freely copy it from ftp://211.69.140.177 or ftp://brassica.hzau.edu.cn and the source code can be found in Excel's Visual Basic Editor.

Parallel computation and the Basis system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, G.R.

1992-12-16

A software package has been written that can facilitate efforts to develop powerful, flexible, and easy-to-use programs that can run in single-processor, massively parallel, and distributed computing environments. Particular attention has been given to the difficulties posed by a program consisting of many science packages that represent subsystems of a complicated, coupled system. Methods have been found to maintain independence of the packages by hiding data structures without increasing the communication costs in a parallel computing environment. Concepts developed in this work are demonstrated by a prototype program that uses library routines from two existing software systems, Basis and Parallelmore » Virtual Machine (PVM). Most of the details of these libraries have been encapsulated in routines and macros that could be rewritten for alternative libraries that possess certain minimum capabilities. The prototype software uses a flexible master-and-slaves paradigm for parallel computation and supports domain decomposition with message passing for partitioning work among slaves. Facilities are provided for accessing variables that are distributed among the memories of slaves assigned to subdomains. The software is named PROTOPAR.« less

Parallel computation and the basis system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, G.R.

1993-05-01

A software package has been written that can facilitate efforts to develop powerful, flexible, and easy-to use programs that can run in single-processor, massively parallel, and distributed computing environments. Particular attention has been given to the difficulties posed by a program consisting of many science packages that represent subsystems of a complicated, coupled system. Methods have been found to maintain independence of the packages by hiding data structures without increasing the communications costs in a parallel computing environment. Concepts developed in this work are demonstrated by a prototype program that uses library routines from two existing software systems, Basis andmore » Parallel Virtual Machine (PVM). Most of the details of these libraries have been encapsulated in routines and macros that could be rewritten for alternative libraries that possess certain minimum capabilities. The prototype software uses a flexible master-and-slaves paradigm for parallel computation and supports domain decomposition with message passing for partitioning work among slaves. Facilities are provided for accessing variables that are distributed among the memories of slaves assigned to subdomains. The software is named PROTOPAR.« less

An Excel Macro to Plot the HFE-Diagram to Identify Sea Water Intrusion Phases.

PubMed

Giménez-Forcada, Elena; Sánchez San Román, F Javier

2015-01-01

A hydrochemical facies evolution diagram (HFE-D) is a multirectangular diagram, which is a useful tool in the interpretation of sea water intrusion processes. This method note describes a simple method for generating an HFE-D plot using the spreadsheet software package, Microsoft Excel. The code was applied to groundwater from the alluvial coastal plain of Grosseto (Tuscany, Italy), which is characterized by a complex salinization process in which sea water mixes with sulfate or bicarbonate recharge water. © 2014, National GroundWater Association.

Design and simulation of a novel high-efficiency cooling heat-sink structure using fluid-thermodynamics

NASA Astrophysics Data System (ADS)

Hongqi, Jing; Li, Zhong; Yuxi, Ni; Junjie, Zhang; Suping, Liu; Xiaoyu, Ma

2015-10-01

A novel high-efficiency cooling mini-channel heat-sink structure has been designed to meet the package technology demands of high power density laser diode array stacks. Thermal and water flowing characteristics have been simulated using the Ansys-Fluent software. Owing to the increased effective cooling area, this mini-channel heat-sink structure has a better cooling effect when compared with the traditional macro-channel heat-sinks. Owing to the lower flow velocity in this novel high efficient cooling structure, the chillers' water-pressure requirement is reduced. Meanwhile, the machining process of this high-efficiency cooling mini-channel heat-sink structure is simple and the cost is relatively low, it also has advantages in terms of high durability and long lifetime. This heat-sink is an ideal choice for the package of high power density laser diode array stacks. Project supported by the Defense Industrial Technology Development Program (No. B1320133033).

CAST: a new program package for the accurate characterization of large and flexible molecular systems.

PubMed

Grebner, Christoph; Becker, Johannes; Weber, Daniel; Bellinger, Daniel; Tafipolski, Maxim; Brückner, Charlotte; Engels, Bernd

2014-09-15

The presented program package, Conformational Analysis and Search Tool (CAST) allows the accurate treatment of large and flexible (macro) molecular systems. For the determination of thermally accessible minima CAST offers the newly developed TabuSearch algorithm, but algorithms such as Monte Carlo (MC), MC with minimization, and molecular dynamics are implemented as well. For the determination of reaction paths, CAST provides the PathOpt, the Nudge Elastic band, and the umbrella sampling approach. Access to free energies is possible through the free energy perturbation approach. Along with a number of standard force fields, a newly developed symmetry-adapted perturbation theory-based force field is included. Semiempirical computations are possible through DFTB+ and MOPAC interfaces. For calculations based on density functional theory, a Message Passing Interface (MPI) interface to the Graphics Processing Unit (GPU)-accelerated TeraChem program is available. The program is available on request. Copyright © 2014 Wiley Periodicals, Inc.

ROOT: A C++ framework for petabyte data storage, statistical analysis and visualization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antcheva, I.; /CERN; Ballintijn, M.

2009-01-01

ROOT is an object-oriented C++ framework conceived in the high-energy physics (HEP) community, designed for storing and analyzing petabytes of data in an efficient way. Any instance of a C++ class can be stored into a ROOT file in a machine-independent compressed binary format. In ROOT the TTree object container is optimized for statistical data analysis over very large data sets by using vertical data storage techniques. These containers can span a large number of files on local disks, the web or a number of different shared file systems. In order to analyze this data, the user can chose outmore » of a wide set of mathematical and statistical functions, including linear algebra classes, numerical algorithms such as integration and minimization, and various methods for performing regression analysis (fitting). In particular, the RooFit package allows the user to perform complex data modeling and fitting while the RooStats library provides abstractions and implementations for advanced statistical tools. Multivariate classification methods based on machine learning techniques are available via the TMVA package. A central piece in these analysis tools are the histogram classes which provide binning of one- and multi-dimensional data. Results can be saved in high-quality graphical formats like Postscript and PDF or in bitmap formats like JPG or GIF. The result can also be stored into ROOT macros that allow a full recreation and rework of the graphics. Users typically create their analysis macros step by step, making use of the interactive C++ interpreter CINT, while running over small data samples. Once the development is finished, they can run these macros at full compiled speed over large data sets, using on-the-fly compilation, or by creating a stand-alone batch program. Finally, if processing farms are available, the user can reduce the execution time of intrinsically parallel tasks - e.g. data mining in HEP - by using PROOF, which will take care of optimally distributing the work over the available resources in a transparent way.« less

Meso-scopic Densification in Brittle Granular Materials

NASA Astrophysics Data System (ADS)

Neal, William; Appleby-Thomas, Gareth; Collins, Gareth

2013-06-01

Particulate materials are ideally suited to shock absorbing applications due to the large amounts of energy required to deform their inherently complex meso-structure. Significant effort is being made to improve macro-scale material models to represent these atypical materials. On the long road towards achieving this capability, an important milestone would be to understand how particle densification mechanisms are affected by loading rate. In brittle particulate materials, the majority of densification is caused by particle fracture. Macro-scale quasi-static and dynamic compaction curves have been measured that show good qualitative agreement. There are, however, some differences that appear to be dependent on the loading rate that require further investigation. This study aims to investigate the difference in grain-fracture behavior between the quasi-static and shock loading response of brittle glass microsphere beds using a combination of quasi-static and dynamic loading techniques. Results from pressure-density measurements, sample recovery, and meso-scale hydrocode models (iSALE, an in-house simulation package) are discussed to explain the differences in particle densification mechanisms between the two loading rate regimes. Gratefully funded by AWE.plc.

Floating macro-litter along the Mediterranean French coast: Composition, density, distribution and overlap with cetacean range.

PubMed

Di-Méglio, Nathalie; Campana, Ilaria

2017-05-15

This study investigated the composition, density and distribution of floating macro-litter along the Liguro-Provençal basin with respect to cetaceans presence. Survey transects were performed in summer between 2006 and 2015 from sailing vessels with simultaneous cetaceans observations. During 5171km travelled, 1993 floating items were recorded, widespread in the whole study area. Plastics was the predominant category, with bags/packaging always representing >45% of total items. Overall mean density (14.98 items/km 2 ) was stable with significant increase reported only in 2010-2011; monthly analysis showed lower litter densities in July-September, suggesting possible seasonal patterns. Kernel density estimation for plastics revealed ubiquitous distribution rather than high accumulation areas, mainly due to the circulation dynamics of this area. The presence range of cetaceans (259 sightings, 6 species) corresponded by ~50% with plastic distribution, indicating high potential of interaction, especially in the eastern part of the area, but effective risks for marine species might be underrepresented. Copyright © 2017 Elsevier Ltd. All rights reserved.

Hetero-cellular prototyping by synchronized multi-material bioprinting for rotary cell culture system.

PubMed

Snyder, Jessica; Son, Ae Rin; Hamid, Qudus; Wu, Honglu; Sun, Wei

2016-01-13

Bottom-up tissue engineering requires methodological progress of biofabrication to capture key design facets of anatomical arrangements across micro, meso and macro-scales. The diffusive mass transfer properties necessary to elicit stability and functionality require hetero-typic contact, cell-to-cell signaling and uniform nutrient diffusion. Bioprinting techniques successfully build mathematically defined porous architecture to diminish resistance to mass transfer. Current limitations of bioprinted cell assemblies include poor micro-scale formability of cell-laden soft gels and asymmetrical macro-scale diffusion through 3D volumes. The objective of this work is to engineer a synchronized multi-material bioprinter (SMMB) system which improves the resolution and expands the capability of existing bioprinting systems by packaging multiple cell types in heterotypic arrays prior to deposition. This unit cell approach to arranging multiple cell-laden solutions is integrated with a motion system to print heterogeneous filaments as tissue engineered scaffolds and nanoliter droplets. The set of SMMB process parameters control the geometric arrangement of the combined flow's internal features and constituent material's volume fractions. SMMB printed hepatocyte-endothelial laden 200 nl droplets are cultured in a rotary cell culture system (RCCS) to study the effect of microgravity on an in vitro model of the human hepatic lobule. RCCS conditioning for 48 h increased hepatocyte cytoplasm diameter 2 μm, increased metabolic rate, and decreased drug half-life. SMMB hetero-cellular models present a 10-fold increase in metabolic rate, compared to SMMB mono-culture models. Improved bioprinting resolution due to process control of cell-laden matrix packaging as well as nanoliter droplet printing capability identify SMMB as a viable technique to improve in vitro model efficacy.

Experimental thermal characterization of concrete to be used in CP5.2 packaging system

NASA Astrophysics Data System (ADS)

Lo Frano, R.; Maggini, A.; Aquaro, D.

2017-01-01

This work deals with the experimental evaluation of the thermal conductivity of a concrete matrix to be used for embedding LILW bituminised Wastes into the packaging system. Such a type of packaging, identified with the acronym CP5.2, has been also qualified by executing at the Lab. Scalbatraio of Dep. of Civil and Industrial Engineering of the University of Pisa, an experimental test campaign accordingly to the IAEA regulations. In particular, the knowledge of the thermal conductivity is important because of the fire or furnace test to carry out in oven at 800 °C for 30 minutes. These data allowed to simulate pre-test conditions and to set up safety and operational fire test procedures. The concrete thermal conductivity was obtained by performing hot wire tests on cylindrical concrete samples for temperatures ranging from 100° to about 800°C. Thermal conductivity is determined at steady state condition. Results indicate a monotonically reduction of the thermal conductivity as the temperature increases. The comparison with concrete thermal conductivity data available in literature indicates a quite good agreement. Finally, visual and X-ray inspection of sample did not highlight the presence of micro/macro damages that would have affected the thermal performance of the concrete under study.

Advanced Technology Composite Fuselage-Structural Performance

NASA Technical Reports Server (NTRS)

Walker, T. H.; Minguet, P. J.; Flynn, B. W.; Carbery, D. J.; Swanson, G. D.; Ilcewicz, L. B.

1997-01-01

Boeing is studying the technologies associated with the application of composite materials to commercial transport fuselage structure under the NASA-sponsored contracts for Advanced Technology Composite Aircraft Structures (ATCAS) and Materials Development Omnibus Contract (MDOC). This report addresses the program activities related to structural performance of the selected concepts, including both the design development and subsequent detailed evaluation. Design criteria were developed to ensure compliance with regulatory requirements and typical company objectives. Accurate analysis methods were selected and/or developed where practical, and conservative approaches were used where significant approximations were necessary. Design sizing activities supported subsequent development by providing representative design configurations for structural evaluation and by identifying the critical performance issues. Significant program efforts were directed towards assessing structural performance predictive capability. The structural database collected to perform this assessment was intimately linked to the manufacturing scale-up activities to ensure inclusion of manufacturing-induced performance traits. Mechanical tests were conducted to support the development and critical evaluation of analysis methods addressing internal loads, stability, ultimate strength, attachment and splice strength, and damage tolerance. Unresolved aspects of these performance issues were identified as part of the assessments, providing direction for future development.

Retention prediction and separation optimization under multilinear gradient elution in liquid chromatography with Microsoft Excel macros.

PubMed

Fasoula, S; Zisi, Ch; Gika, H; Pappa-Louisi, A; Nikitas, P

2015-05-22

A package of Excel VBA macros have been developed for modeling multilinear gradient retention data obtained in single or double gradient elution mode by changing organic modifier(s) content and/or eluent pH. For this purpose, ten chromatographic models were used and four methods were adopted for their application. The methods were based on (a) the analytical expression of the retention time, provided that this expression is available, (b) the retention times estimated using the Nikitas-Pappa approach, (c) the stepwise approximation, and (d) a simple numerical approximation involving the trapezoid rule for integration of the fundamental equation for gradient elution. For all these methods, Excel VBA macros have been written and implemented using two different platforms; the fitting and the optimization platform. The fitting platform calculates not only the adjustable parameters of the chromatographic models, but also the significance of these parameters and furthermore predicts the analyte elution times. The optimization platform determines the gradient conditions that lead to the optimum separation of a mixture of analytes by using the Solver evolutionary mode, provided that proper constraints are set in order to obtain the optimum gradient profile in the minimum gradient time. The performance of the two platforms was tested using experimental and artificial data. It was found that using the proposed spreadsheets, fitting, prediction, and optimization can be performed easily and effectively under all conditions. Overall, the best performance is exhibited by the analytical and Nikitas-Pappa's methods, although the former cannot be used under all circumstances. Copyright © 2015 Elsevier B.V. All rights reserved.

The application of NASCAD as a NASTRAN pre- and post-processor

NASA Technical Reports Server (NTRS)

Peltzman, Alan N.

1987-01-01

The NASA Computer Aided Design (NASCAD) graphics package provides an effective way to interactively create, view, and refine analytic data models. NASCAD's macro language, combined with its powerful 3-D geometric data base allows the user important flexibility and speed in constructing his model. This flexibility has the added benefit of enabling the user to keep pace with any new NASTRAN developments. NASCAD allows models to be conveniently viewed and plotted to best advantage in both pre- and post-process phases of development, providing useful visual feedback to the analysis process. NASCAD, used as a graphics compliment to NASTRAN, can play a valuable role in the process of finite element modeling.

Development of magnetic micro-solid phase extraction for analysis of phthalate esters in packaged food.

PubMed

Makkliang, Fonthip; Kanatharana, Proespichaya; Thavarungkul, Panote; Thammakhet, Chongdee

2015-01-01

A novel, simple and low cost magnetic multi-walled carbon nanotubes-poly (vinyl alcohol) cryogel-micro-solid phase extraction (magnetic-MWCNTs-PVA cryogel-μ-SPE) sorbent was synthesized by incorporating magnetic particles and MWCNTs into a PVA cryogel. The magnetic-MWCNTs-PVA cryogel-μ-SPE sorbent developed, with a large surface area and macro-porous structure, provided good sorbent-to-sorbent reproducibility (%RSD<8) and each sorbent could be used up to 30 times (%RSD<6). This sorbent was applied for the extraction of dibutyl phthalate (DBP) and di-2-(ethylhexyl) phthalate (DEHP) in packaged food prior to analysis by gas chromatograph coupled with flame ionisation detector (GC-FID). The concentration of DBP and DEHP in hot-water samples from plastic bags were found in the range 0.04-0.15 μg mL(-1) and 0.03-0.20 μg mL(-1), respectively, but only DEHP was found in clear chicken soup samples in the range 0.02-0.07 μg mL(-1). Copyright © 2014 Elsevier Ltd. All rights reserved.

Immunofluorescent staining reveals hypermethylation of microchromosomes in the central bearded dragon, Pogona vitticeps.

PubMed

Domaschenz, Renae; Livernois, Alexandra M; Rao, Sudha; Ezaz, Tariq; Deakin, Janine E

2015-01-01

Studies of model organisms have demonstrated that DNA cytosine methylation and histone modifications are key regulators of gene expression in biological processes. Comparatively little is known about the presence and distribution of epigenetic marks in non-model amniotes such as non-avian reptiles whose genomes are typically packaged into chromosomes of distinct size classes. Studies of chicken karyotypes have associated the gene-richness and high GC content of microchromosomes with a distinct epigenetic landscape. To determine whether this is likely to be a common feature of amniote microchromosomes, we have analysed the distribution of epigenetic marks using immunofluorescence on metaphase chromosomes of the central bearded dragon (Pogona vitticeps). This study is the first to study the distribution of epigenetic marks on non-avian reptile chromosomes. We observed an enrichment of DNA cytosine methylation, active modifications H3K4me2 and H3K4me3, as well as the repressive mark H3K27me3 in telomeric regions on macro and microchromosomes. Microchromosomes were hypermethylated compared to macrochromosomes, as they are in chicken. However, differences between macro- and microchromosomes for histone modifications associated with actively transcribed or repressed DNA were either less distinct or not detectable. Hypermethylation of microchromosomes compared to macrochromosomes is a shared feature between P. vitticeps and avian species. The lack of the clear distinction between macro- and microchromosome staining patterns for active and repressive histone modifications makes it difficult to determine at this stage whether microchrosome hypermethylation is correlated with greater gene density as it is in aves, or associated with the greater GC content of P. vitticeps microchromosomes compared to macrochromosomes.

Retrieval of Macro- and Micro-Physical Properties of Oceanic Hydrosols from Polarimetric Observations

NASA Technical Reports Server (NTRS)

Ibrahim, Amir; Gilerson, Alexander; Chowdhary, Jacek; Ahmed, Samir

2016-01-01

Remote sensing has mainly relied on measurements of scalar radiance and its spectral and angular features to retrieve micro- and macro-physical properties of aerosols/hydrosols. However, it is recognized that measurements that include the polarimetric characteristics of light provide more intrinsic information about particulate scattering. To take advantage of this, we used vector radiative transfer (VRT) simulations and developed an analytical relationship to retrieve the macro and micro-physical properties of the oceanic hydrosols. Specifically, we investigated the relationship between the observed degree of linear polarization (DoLP) and the ratio of attenuation-to- absorption coefficients (c/a) in water, from which the scattering coefficient can be readily computed (b equals c minus a), after retrieving a. This relationship was parameterized for various scattering geometries, including sensor zenith/azimuth angles relative to the Sun's principal plane, and for varying Sun zenith angles. An inversion method was also developed for the retrieval of the microphysical properties of hydrosols, such as the bulk refractive index and the particle size distribution. The DoLP vs c/a relationship was tested and validated against in-situ measurements of underwater light polarization obtained by a custom-built polarimeter and measurements of the coefficients a and c, obtained using an in-water WET (Western Environmental Technologies) Labs ac-s (attenuation coefficients In-Situ Spectrophotometer) instrument package. These measurements confirmed the validity of the approach, with retrievals of attenuation coefficients showing a high coefficient of determination depending on the wavelength. We also performed a sensitivity analysis of the DoLP at the Top of Atmosphere (TOA) over coastal waters showing the possibility of polarimetric remote sensing application for ocean color.

Summary of the Ratfor language, an extended portable dialect called REP, its style and flavor, and details of its implementation on the PDP-10

DOE Office of Scientific and Technical Information (OSTI.GOV)

Figen, J.

1981-09-10

Ratfor (RATional FORtran) is a dialect of Fortran that allows structured programming and the use of simple macros. It is the language of the Software Tools package, and is documented in the book Software Tools. It has proved significantly easier than Fortran to read, write, and understand. Although debugging is slightly harder in Ratfor than in Fortran, there is usually less of it to do, since Ratfor lends itself to better program design. Ratfor operates as a preprocessor to any existing Fortran system. It is relatively easy, using Ratfor, to write programs that are portable with little or no changemore » to any environment that supports standard Fortran. REP (Ratfor Extended and Portable) is an extended version of Ratfor. It is fully upward compatible with the Addison-Wesley translator, though there are a few divergences from certain Unix and Software Tools User Group dialects. The principal feature of REP is its fully developed macro facility, a language within a language, capable of doing such things as creating new data types, data structuring, recursive procedures, and much more, portably, and in the spirit of Ratfor, but there are many other lesser though nevertheless important extensions.« less

Advanced Technology Composite Fuselage - Repair and Damage Assessment Supporting Maintenance

NASA Technical Reports Server (NTRS)

Flynn, B. W.; Bodine, J. B.; Dopker, B.; Finn, S. R.; Griess, K. H.; Hanson, C. T.; Harris, C. G.; Nelson, K. M.; Walker, T. H.; Kennedy, T. C.;

Pyrolaser Operating System

NASA Technical Reports Server (NTRS)

Roberts, Floyd E., III

1994-01-01

Software provides for control and acquisition of data from optical pyrometer. There are six individual programs in PYROLASER package. Provides quick and easy way to set up, control, and program standard Pyrolaser. Temperature and emisivity measurements either collected as if Pyrolaser in manual operating mode or displayed on real-time strip charts and stored in standard spreadsheet format for posttest analysis. Shell supplied to allow macros, which are test-specific, added to system easily. Written using Labview software for use on Macintosh-series computers running System 6.0.3 or later, Sun Sparc-series computers running Open-Windows 3.0 or MIT's X Window System (X11R4 or X11R5), and IBM PC or compatible computers running Microsoft Windows 3.1 or later.

The data and system Nikkei Telecom "Industry/Technology Information Service"

NASA Astrophysics Data System (ADS)

Kurata, Shizuya; Sueyoshi, Yukio

Nihoh Keizai Shimbun started supplying "Industry/Technology Information Service" from July 1989 as a part of Nikkei Telecom Package, which is online information service using personal computers for its terminals. Previously Nikkei's database service mainly covered such areas as economy, corporations and markets. On the other hand, the new "Industry/Technology Information Service" (main data covers industry by industry information-semi macro) is attracting a good deal of attention as it is the first to supply science and technology related database which has not been touched before. Moreover it is attracting attention technically as it has an access by gateway system to JOIS which is the first class science technology file in Japan. This report introduces data and system of "Industry/Technology Information Service" briefly.

Effects of ethrel, 1-MCP and modified atmosphere packaging on the quality of 'Wonderful' pomegranates during cold storage.

PubMed

Valdenegro, Mónika; Huidobro, Camila; Monsalve, Liliam; Bernales, Maricarmen; Fuentes, Lida; Simpson, Ricardo

2018-03-24

Pomegranate (Punica granatum) is a non-climacteric fruit susceptible to chilling injury (CI) at temperatures below 5 °C. To understand the influences of ethylene and modified atmosphere on CI physiological disorders of pomegranate, exogenous ethrel (0.5, 1 and 1.5 µg L -1 ) treatments, 1-methylcyclopropene (1-MCP) (1 µL L -1 ) exposure, packaging in a modified atmosphere (MAP) (XTend™ bags; StePac, São Paulo, Brazil), a MAP/1-MCP combination, and packaging in macro-perforated bags (MPB) were applied. The treated fruits were cold stored (2 ± 1 °C; 85% relative humidity) and sampled during 120 + 3 days at 20 °C. During cold storage, CI symptoms started at 20 days in MPB and at 60 days for all exogenous ethylene treatments, and were delayed to 120 days in MAP, 1-MCP and MAP/1-MCP treatments. MPB and ethylene treatments induced significant electrolyte leakage, oxidative damage, lipid peroxidation, ethylene and CO 2 production, and 1-aminocyclopropane-1-carboxylic acid oxidase activity, without any change in total soluble solids, titratable acidity or skin and aril colours. Conversely, MAP by itself, or in combination with 1-MCP application, effectively delayed CI symptoms. During long-term cold storage of this non-climacteric fruit, ethrel application induced endogenous ethylene biosynthesis, accelerating the appearance of CI symptoms in contrast to the observations made for MAP and 1-MCP treatments. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

High power vertical stacked diode laser development using macro-channel water cooling and hard solder bonding technology

NASA Astrophysics Data System (ADS)

Yu, Dongshan; Liang, Xuejie; Wang, Jingwei; Li, Xiaoning; Nie, Zhiqiang; Liu, Xingsheng

2017-02-01

A novel marco channel cooler (MaCC) has been developed for packaging high power diode vertical stacked (HPDL) lasers, which eliminates many of the issues in commercially-available copper micro-channel coolers (MCC). The MaCC coolers, which do not require deionized water as coolant, were carefully designed for compact size and superior thermal dissipation capability. Indium-free packaging technology was adopted throughout product design and fabrication process to minimize the risk of solder electromigration and thermal fatigue at high current density and long pulse width under QCW operation. Single MaCC unit with peak output power of up to 700W/bar at pulse width in microsecond range and 200W/bar at pulse width in millisecond range has been recorded. Characteristic comparison on thermal resistivity, spectrum, near filed and lifetime have been conducted between a MaCC product and its counterpart MCC product. QCW lifetime test (30ms 10Hz, 30% duty cycle) has also been conducted with distilled water as coolant. A vertical 40-MaCC stack product has been fabricated, total output power of 9 kilowatts has been recorded under QCW mode (3ms, 30Hz, 9% duty cycle).

[Heavy metal pollution ecology of macro-fungi: research advances and expectation].

PubMed

Zhou, Qi-xing; An, Xin-long; Wei, Shu-he

2008-08-01

Macro-fungi are the main component of biosphere and one of the ecological resources, and play very important roles in matter cycling and in maintaining ecological balances. This paper summarized and reviewed the research advances in the eco-toxicological effects of heavy metals on macro-fungi, the bioaccumulation function of macro-fungi on heavy metals, the ecological adaptation mechanisms of macro-fungi to heavy metal pollution, the role of macro-fungi as a bio-indicator of heavy metal pollution, and the potential of macro-fungi in the ecological remediation of contaminated environment. To strengthen the researches on the heavy metal pollution ecology of macro-fungi would be of practical significance in the reasonable utilization of macro-fungi resources and in the ecological remediation of contaminated environment.

Synthesis and Characterization of a Novel Polyacetal & Design and Preparation of Superhydrophobic Photocatalytic Surfaces

NASA Astrophysics Data System (ADS)

Zhao, Yuanyuan

Acetal copolymers represent a family of well-established engineering thermoplastics serving a broad range of important industrial applications including replacement for metals. The first part of this thesis describes the first synthesis of an eight-member ring acetal, 6-methyl-1, 3-dioxocane (MDOC), and its cationic copolymerization with trioxane initiated by boron trifluoride dibutyl etherate. The copolymerization process was monitored in situ using proton NMR. Incorporation of MDOC led to the insertion of the "stopper" unit, "--[CH2CH2CH(CH3)CH 2CH2)O]--", thus synthesizing the new acetal copolymer. A superior copolymer thermal stability with a ~ 20oC increase in degradation onset temperature compared with end-capped polyoxmethylene was observed. Both TGA and DSC data indicated the random placement of the "stopper" in the copolymer likely due to efficient transacetalization because of the higher basicity and flexibility of the stopper unit compared with co-units comprising 2 to 4 carbons in length. DSC thermo-grams showed a melting curve of a polymer with melting point lower, as expected, than that of oxymethylene homopolymer. No homopolymer in the copolymer samples was in indicated by TGA. The new acetal copolymer, poly(6-methyl-1,3-dioxocane-co-trioxane), which has a "stopper" co-unit with five carbon atoms along the backbone, contains the longest reported stopper co-unit, potentially leading to improved elongation, and toughness and better compatibility with a range of additives compared to acetal homopolymers.. Chapter 3 presents a novel lamination fabrication method that enables pre-formed TiO2 nanoparticles to become partially embedded in the surface of a thermoplastic polymer film. In this way, the particles are strongly adhered to the surface while remaining accessible to the aqueous solution. By modifying the fabrication conditions (e.g. temperature, pressure, polymer melt viscosity, etc.), the morphology of the hierarchical TiO2-polymer surface can be controlled and thus the rate of photocatalytic reactions can be increased. In addition, the fraction of TiO2 particles that become fully embedded in the polymer surface, and so inaccessible to photocatalysis reactions, can be reduced through lamination process control, thereby reducing costs. In Chapter 4 and Chapter 5, a general approach is presented to incorporating particles into a superhydrophobic surface that catalyze the formation of reactive oxygen species. Superhydrophobic photocatalytic surfaces are prepared using hydrophilic TiO2 nanoparticles and hydrophobic Silicon-Phthalocyanine photosensitizer particles. A stable Cassie state was maintained, even on surfaces fabricated with hydrophilic TiO2 particles, due to significant hierarchical roughness. A triple phase photogenerator is designed and fabricated. By printing the surface on a porous support, oxygen could be flowed through the plastron resulting in significantly higher photooxidation rates relative to a static ambient. Photooxidation of Rhodamine B and BSA were studied on TiO2-containing surfaces and singlet oxygen was trapped on surfaces incorporating Silicon-Phthalocyanine photosensitizer particles. Catalyst particles could be isolated in the plastron to avoid contamination by the solution. This approach may prove useful for water purification and medical devices where isolation of the catalyst particle from the solution is necessary and so Cassie stability is required. (Abstract shortened by UMI.).

Women, war, and reproductive health in developing countries.

PubMed

Pillai, Vijayan; Wang, Ya-Chien; Maleku, Arati

2017-01-01

Globally, millions of people are affected by war and conflicts every year. However, women have increasingly suffered the greatest harm by war in more different ways than men. We conceptualize a reproductive rights approach toward examining the effects of war on women's reproductive health in developing countries. Given the rising concerns of exclusion to adequately address women's rights, sexual and gender-based violence, and post-conflict accountability, we specifically focus on the limitations of the Minimum Initial Service Package, a UN-sponsored reproductive health service program in conflict zones while offering a broad reproductive rights-based conceptual lens for examining reproductive health care services in war-torn areas. In addition, we discuss the roles social workers may play at both micro and macro levels in war-torn areas to bring about both short term and long term gains in women's reproductive health.

Potential macro-detritivore range expansion into the subarctic stimulates litter decomposition: a new positive feedback mechanism to climate change?

PubMed

van Geffen, Koert G; Berg, Matty P; Aerts, Rien

2011-12-01

As a result of low decomposition rates, high-latitude ecosystems store large amounts of carbon. Litter decomposition in these ecosystems is constrained by harsh abiotic conditions, but also by the absence of macro-detritivores. We have studied the potential effects of their climate change-driven northward range expansion on the decomposition of two contrasting subarctic litter types. Litter of Alnus incana and Betula pubescens was incubated in microcosms together with monocultures and all possible combinations of three functionally different macro-detritivores (the earthworm Lumbricus rubellus, isopod Oniscus asellus, and millipede Julus scandinavius). Our results show that these macro-detritivores stimulated decomposition, especially of the high-quality A. incana litter and that the macro-detritivores tested differed in their decomposition-stimulating effects, with earthworms having the largest influence. Decomposition processes increased with increasing number of macro-detritivore species, and positive net diveristy effects occurred in several macro-detritivore treatments. However, after correction for macro-detritivore biomass, all interspecific differences in macro-detritivore effects, as well as the positive effects of species number on subarctic litter decomposition disappeared. The net diversity effects also appeared to be driven by variation in biomass, with a possible exception of net diversity effects in mass loss. Based on these results, we conclude that the expected climate change-induced range expansion of macro-detritivores into subarctic regions is likely to result in accelerated decomposition rates. Our results also indicate that the magnitude of macro-detritivore effects on subarctic decomposition will mainly depend on macro-detritivore biomass, rather than on macro-detritivore species number or identity.

BioWord: A sequence manipulation suite for Microsoft Word

PubMed Central

2012-01-01

Background The ability to manipulate, edit and process DNA and protein sequences has rapidly become a necessary skill for practicing biologists across a wide swath of disciplines. In spite of this, most everyday sequence manipulation tools are distributed across several programs and web servers, sometimes requiring installation and typically involving frequent switching between applications. To address this problem, here we have developed BioWord, a macro-enabled self-installing template for Microsoft Word documents that integrates an extensive suite of DNA and protein sequence manipulation tools. Results BioWord is distributed as a single macro-enabled template that self-installs with a single click. After installation, BioWord will open as a tab in the Office ribbon. Biologists can then easily manipulate DNA and protein sequences using a familiar interface and minimize the need to switch between applications. Beyond simple sequence manipulation, BioWord integrates functionality ranging from dyad search and consensus logos to motif discovery and pair-wise alignment. Written in Visual Basic for Applications (VBA) as an open source, object-oriented project, BioWord allows users with varying programming experience to expand and customize the program to better meet their own needs. Conclusions BioWord integrates a powerful set of tools for biological sequence manipulation within a handy, user-friendly tab in a widely used word processing software package. The use of a simple scripting language and an object-oriented scheme facilitates customization by users and provides a very accessible educational platform for introducing students to basic bioinformatics algorithms. PMID:22676326

BioWord: a sequence manipulation suite for Microsoft Word.

PubMed

Anzaldi, Laura J; Muñoz-Fernández, Daniel; Erill, Ivan

2012-06-07

The ability to manipulate, edit and process DNA and protein sequences has rapidly become a necessary skill for practicing biologists across a wide swath of disciplines. In spite of this, most everyday sequence manipulation tools are distributed across several programs and web servers, sometimes requiring installation and typically involving frequent switching between applications. To address this problem, here we have developed BioWord, a macro-enabled self-installing template for Microsoft Word documents that integrates an extensive suite of DNA and protein sequence manipulation tools. BioWord is distributed as a single macro-enabled template that self-installs with a single click. After installation, BioWord will open as a tab in the Office ribbon. Biologists can then easily manipulate DNA and protein sequences using a familiar interface and minimize the need to switch between applications. Beyond simple sequence manipulation, BioWord integrates functionality ranging from dyad search and consensus logos to motif discovery and pair-wise alignment. Written in Visual Basic for Applications (VBA) as an open source, object-oriented project, BioWord allows users with varying programming experience to expand and customize the program to better meet their own needs. BioWord integrates a powerful set of tools for biological sequence manipulation within a handy, user-friendly tab in a widely used word processing software package. The use of a simple scripting language and an object-oriented scheme facilitates customization by users and provides a very accessible educational platform for introducing students to basic bioinformatics algorithms.

A unifying kinetic framework for modeling oxidoreductase-catalyzed reactions.

PubMed

Chang, Ivan; Baldi, Pierre

2013-05-15

Oxidoreductases are a fundamental class of enzymes responsible for the catalysis of oxidation-reduction reactions, crucial in most bioenergetic metabolic pathways. From their common root in the ancient prebiotic environment, oxidoreductases have evolved into diverse and elaborate protein structures with specific kinetic properties and mechanisms adapted to their individual functional roles and environmental conditions. While accurate kinetic modeling of oxidoreductases is thus important, current models suffer from limitations to the steady-state domain, lack empirical validation or are too specialized to a single system or set of conditions. To address these limitations, we introduce a novel unifying modeling framework for kinetic descriptions of oxidoreductases. The framework is based on a set of seven elementary reactions that (i) form the basis for 69 pairs of enzyme state transitions for encoding various specific microscopic intra-enzyme reaction networks (micro-models), and (ii) lead to various specific macroscopic steady-state kinetic equations (macro-models) via thermodynamic assumptions. Thus, a synergistic bridge between the micro and macro kinetics can be achieved, enabling us to extract unitary rate constants, simulate reaction variance and validate the micro-models using steady-state empirical data. To help facilitate the application of this framework, we make available RedoxMech: a Mathematica™ software package that automates the generation and customization of micro-models. The Mathematica™ source code for RedoxMech, the documentation and the experimental datasets are all available from: http://www.igb.uci.edu/tools/sb/metabolic-modeling. pfbaldi@ics.uci.edu Supplementary data are available at Bioinformatics online.

Influence of the piezoelectric parameters on the dynamics of an active rotor

NASA Astrophysics Data System (ADS)

Gawryluk, Jarosław; Mitura, Andrzej; Teter, Andrzej

2018-01-01

The main aim of this paper is an experimental and numerical analysis of the dynamic behavior of an active rotor with three composite blades. The study focuses on developing an effective FE modeling technique of a macro fiber composite element (denoted as MFC or active element) for the dynamic tests of active structures. The active rotor under consideration consists of a hub with a drive shaft, three grips and three glass-epoxy laminate blades with embedded active elements. A simplified FE model of the macro fiber composite element exhibiting the d33 piezoelectric effect is developed using the Abaqus software package. The discussed transducer is modeled as quasi-homogeneous piezoelectric material, and voltage is applied to the opposite faces of the element. In this case, the effective (equivalent) piezoelectric constant d33* is specified. Both static and dynamic tests are performed to verify the proposed model. First, static deflections of the active blade caused by the voltage signal are determined by numerical and experimental analyses. Next, a numerical modal analysis of the active rotor is performed. The eigenmodes and corresponding eigenfrequencies are determined by the Lanczos method. The influence of the model parameters (i.e., the effective piezoelectric constant d33 *, voltage signal, angular velocity) on the dynamics of the active rotor is examined. Finally, selected numerical results are validated in experimental tests. The experimental findings demonstrate that the structural stiffening effect caused by the active element strongly depends on the value of the effective piezoelectric constant.

Lemons to Lemonade: How Five Challenges in Teaching Macro Practice Helped to Strengthen Our Course

ERIC Educational Resources Information Center

Dooley, Joe; Sellers, Sherril; Gordon-Hempe, Cornelia

2009-01-01

Teaching macro practice can be challenging. While students have some concepts of what macro practice entails, their knowledge may be limited and sometimes inaccurate. Moreover, students may be reluctant to engage in macro change efforts. Given the scarcity of literature regarding teaching macro practice and the growing importance of it in social…

Unexplained high thyroid stimulating hormone: a "BIG" problem.

PubMed

Mendoza, Heidi; Connacher, Alan; Srivastava, Rajeev

2009-01-01

Macro-hormones and macro-enzymes are high molecular weight conjugates of hormones or enzymes, respectively, often with immunoglobulins. These are referred to as macromolecular complexes, and may cause artefactually elevated biochemical tests results. Macro enzymes of the most commonly measured serum enzymes have been identified and are recognised as a source of elevated measurements that may cause diagnostic confusion; macro-creatine kinase and macro-amylase are the two better known macro-enzymes in clinical practice. Literature on macro-hormones is largely restricted to macro-prolactin. We present a case of a clinically euthyroid patient, who had persistently elevated thyroid stimulating hormone (TSH) but free thyroxine within the reference limits. She underwent repeated thyroid investigations and thyroid hormone interference studies, until macro-TSH was identified as the most likely cause of unexplained elevated TSH. Following the identification and characterisation of this biochemical abnormality, she is no longer subject to repeated blood tests for assessment of thyroid function; the patient currently remains clinically euthyroid.

Interfacing peripheral nerve with macro-sieve electrodes following spinal cord injury.

PubMed

Birenbaum, Nathan K; MacEwan, Matthew R; Ray, Wilson Z

2017-06-01

Macro-sieve electrodes were implanted in the sciatic nerve of five adult male Lewis rats following spinal cord injury to assess the ability of the macro-sieve electrode to interface regenerated peripheral nerve fibers post-spinal cord injury. Each spinal cord injury was performed via right lateral hemisection of the cord at the T 9-10 site. Five months post-implantation, the ability of the macro-sieve electrode to interface the regenerated nerve was assessed by stimulating through the macro-sieve electrode and recording both electromyography signals and evoked muscle force from distal musculature. Electromyography measurements were recorded from the tibialis anterior and gastrocnemius muscles, while evoked muscle force measurements were recorded from the tibialis anterior, extensor digitorum longus, and gastrocnemius muscles. The macro-sieve electrode and regenerated sciatic nerve were then explanted for histological evaluation. Successful sciatic nerve regeneration across the macro-sieve electrode interface following spinal cord injury was seen in all five animals. Recorded electromyography signals and muscle force recordings obtained through macro-sieve electrode stimulation confirm the ability of the macro-sieve electrode to successfully recruit distal musculature in this injury model. Taken together, these results demonstrate the macro-sieve electrode as a viable interface for peripheral nerve stimulation in the context of spinal cord injury.

On macromolecular refinement at subatomic resolution withinteratomic scatterers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Afonine, Pavel V.; Grosse-Kunstleve, Ralf W.; Adams, Paul D.

2007-11-09

A study of the accurate electron density distribution in molecular crystals at subatomic resolution, better than {approx} 1.0 {angstrom}, requires more detailed models than those based on independent spherical atoms. A tool conventionally used in small-molecule crystallography is the multipolar model. Even at upper resolution limits of 0.8-1.0 {angstrom}, the number of experimental data is insufficient for the full multipolar model refinement. As an alternative, a simpler model composed of conventional independent spherical atoms augmented by additional scatterers to model bonding effects has been proposed. Refinement of these mixed models for several benchmark datasets gave results comparable in quality withmore » results of multipolar refinement and superior of those for conventional models. Applications to several datasets of both small- and macro-molecules are shown. These refinements were performed using the general-purpose macromolecular refinement module phenix.refine of the PHENIX package.« less

Outcome modelling strategies in epidemiology: traditional methods and basic alternatives

PubMed Central

Greenland, Sander; Daniel, Rhian; Pearce, Neil

2016-01-01

Abstract Controlling for too many potential confounders can lead to or aggravate problems of data sparsity or multicollinearity, particularly when the number of covariates is large in relation to the study size. As a result, methods to reduce the number of modelled covariates are often deployed. We review several traditional modelling strategies, including stepwise regression and the ‘change-in-estimate’ (CIE) approach to deciding which potential confounders to include in an outcome-regression model for estimating effects of a targeted exposure. We discuss their shortcomings, and then provide some basic alternatives and refinements that do not require special macros or programming. Throughout, we assume the main goal is to derive the most accurate effect estimates obtainable from the data and commercial software. Allowing that most users must stay within standard software packages, this goal can be roughly approximated using basic methods to assess, and thereby minimize, mean squared error (MSE). PMID:27097747

Ectopic osteogenesis and angiogenesis regulated by porous architecture of hydroxyapatite scaffolds with similar interconnecting structure in vivo

PubMed Central

Li, Jinyu; Zhi, Wei; Xu, Taotao; Shi, Feng; Duan, Ke; Wang, Jianxin; Mu, Yandong; Weng, Jie

2016-01-01

The macro-pore sizes of porous scaffold play a key role for regulating ectopic osteogenesis and angiogenesis but many researches ignored the influence of interconnection between macro-pores with different sizes. In order to accurately reveal the relationship between ectopic osteogenesis and macro-pore sizes in dorsal muscle and abdominal cavities of dogs, hydroxyapatite (HA) scaffolds with three different macro-pore sizes of 500–650, 750–900 and 1100–1250 µm were prepared via sugar spheres-leaching process, which also had similar interconnecting structure determined by keeping the d/s ratio of interconnecting window diameter to macro-pore size constant. The permeability test showed that the seepage flow of fluid through the porous scaffolds increased with the increase of macro-pore sizes. The cell growth in three scaffolds was not affected by the macro-pore sizes. The in vivo ectopic implantation results indicated that the macro-pore sizes of HA scaffolds with the similar interconnecting structure have impact not only the speed of osteogenesis and angiogenesis but also the space distribution of newly formed bone. The scaffold with macro-pore sizes of 750–900 µm exhibited much faster angiogenesis and osteogenesis, and much more uniformly distribution of new bone than those with other macro-pore sizes. This work illustrates the importance of a suitable macro-pore sizes in HA scaffolds with the similar interconnecting structure which provides the environment for ectopic osteogenesis and angiogenesis. PMID:27699059

Macro TSH in patients with subclinical hypothyroidism.

PubMed

Hattori, Naoki; Ishihara, Takashi; Yamagami, Keiko; Shimatsu, Akira

2015-12-01

TSH is a sensitive indicator of thyroid function. In subclinical hypothyroidism, however, serum TSH concentrations are elevated despite normal thyroid hormone levels, and macro TSH is one of the causes. This study aimed to clarify the prevalence and nature of macro TSH in patients with subclinical hypothyroidism. We conducted a 2-year cross-sectional observational study. We included 681 patients with subclinical hypothyroidism and 38 patients with overt hypothyroidism (controls). Macro TSH was screened by polyethylene glycol (PEG) method and analysed by gel filtration chromatography and bioassays. Among 681 serum samples, 117 exhibited PEG-precipitable TSH ratios greater than 75% (mean + 1·5 SD in controls) and were subjected to gel filtration chromatography. TSH was eluted at a position greater than 100 kDa in 11 patients with subclinical hypothyroidism (1·62%); these patients were diagnosed with macro TSH. The nature of macro TSH included eight anti-TSH autoantibodies of IgG class, two non-IgG-associated and one human anti-mouse antibody (HAMA). Macro TSH showed low bioactivity. Macro TSH was heterogeneous, but it is mostly comprised of TSH and anti-TSH autoantibodies. When PEG-precipitable TSH exceeds 90% in serum samples with TSH above 10 mU/l, clinicians should strongly suspect the presence of macro TSH and confirm it by gel chromatography. Because macro TSH exhibited low bioactivity, thyroid hormone replacement therapy may not be required in patients with subclinical hypothyroidism due to macro TSH except for those with high serum free TSH levels. © 2014 John Wiley & Sons Ltd.

Symptoms and treatment of mental illness among prisoners: a study of Michigan state prisons.

PubMed

Fries, Brant E; Schmorrow, Angela; Lang, Sylvia W; Margolis, Philip M; Heany, Julia; Brown, Greg P; Barbaree, Howard E; Hirdes, John P

2013-01-01

This study reports on a representative sample of prisoners in Michigan correctional facilities to determine the prevalence of psychiatric illness and the delivery of mental health (MH) services. Mental health assessments were conducted with 618 incarcerated subjects using the interRAI Correctional Facilities (interRAI CF). Subjects were randomly sampled based on four strata: males in the general population, males in administrative segregation, males in special units, and females. The interRAI CF assessments were merged with secondary data provided by the Michigan Department of Corrections (MDOC) containing information on MH diagnoses or services that the subjects were receiving within the facilities, demographics, and sentencing. Study results show that 20.1% of men and 24.8% of women in Michigan prisons have a substantial level of MH symptoms and that 16.5% and 28.9%, respectively, are receiving MH services. However, when compared with Michigan Department of Corrections MH care records, 65.0% of prisoners who are experiencing symptoms of mental illness are not currently receiving any psychiatric services. The mis-match between symptoms and service delivery suggests the need for improved procedures for identifying and measuring psychiatric symptoms within Michigan correctional facilities to ensure that appropriate individuals receive needed care. It is recommended that a standardized assessment process be implemented and conducted at regular intervals for targeting and improving psychiatric care in the prison system. Copyright © 2013 Elsevier Ltd. All rights reserved.

Macro creatine kinase: determination and differentiation of two types by their activation energies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stein, W.; Bohner, J.; Steinhart, R.

1982-01-01

Determination of the MB isoenzyme of creatine kinase in patients with acute myocardial infarction may be disturbed by the presence of macro creatine kinase. The relative molecular mass of this form of creatine kinase in human serum is at least threefold that of the ordinary enzyme, and it is more thermostable. Here we describe our method for determination of macro creatine kinases and an easy-to-perform test for differentiating two forms of macro creatine kinase, based on their distinct activation energies. The activation energies of serum enzymes are mostly in the range of 40-65 kJ/mol of substrate. Unlike normal cytoplasmatic creatinemore » kinases and IgG-linked CK-BB (macro creatine kinase type 1) a second form of macro creatine kinase (macro creatine kinase type 2) shows activation energies greater than 80 kJ/mol of substrate. The exact composition of macro creatine kinase type 2 is still unknown, but there is good reason to believe that it is of mitochondrial origin.« less

Assessment of Nutritional Adequacy of Packaged Gluten-free Food Products.

PubMed

Kulai, Tasha; Rashid, Mohsin

2014-12-01

There is concern about the nutritional quality of processed gluten-free (GF) products. The aim was to investigate the nutrient composition and cost of processed GF products compared with similar regular products. Product size, price, caloric value, and macro- and micronutrient composition were compared between foods labeled "Gluten-free" and comparable regular products in 5 grocery stores in 3 Canadian cities. Data were calculated per 100 g of product. A total of 131 products were studied (71 GF, 60 regular). Overall, calories were comparable between GF and regular foods. However, fat content of GF breads was higher (mean 7.7 vs. 3.6 g, P = 0.003), whereas protein was lower (mean 5.0 vs. 8.0 g, P = 0.001). Mean carbohydrate content of GF pasta was higher (78 vs. 74 g, P = 0.001), whereas protein (7.5 vs. 13.3 g, P < 0.001), fibre (3.3 vs. 5.8 g, P = 0.048), iron (9% vs. 25%DV, P < 0.001), and folate content (5% vs. 95%DV, P < 0.001) were lower. Mean price of GF products was $1.99 versus $1.23 for regular products (P < 0.001). Some commonly consumed packaged GF foods are higher in fat and carbohydrates and lower in protein, iron, and folate compared with regular products. GF products are more expensive. Dietitians should counsel patients on the GF diet regarding its nutritional and financial impact.

Fast simulation of reconstructed phylogenies under global time-dependent birth-death processes.

PubMed

Höhna, Sebastian

2013-06-01

Diversification rates and patterns may be inferred from reconstructed phylogenies. Both the time-dependent and the diversity-dependent birth-death process can produce the same observed patterns of diversity over time. To develop and test new models describing the macro-evolutionary process of diversification, generic and fast algorithms to simulate under these models are necessary. Simulations are not only important for testing and developing models but play an influential role in the assessment of model fit. In the present article, I consider as the model a global time-dependent birth-death process where each species has the same rates but rates may vary over time. For this model, I derive the likelihood of the speciation times from a reconstructed phylogenetic tree and show that each speciation event is independent and identically distributed. This fact can be used to simulate efficiently reconstructed phylogenetic trees when conditioning on the number of species, the time of the process or both. I show the usability of the simulation by approximating the posterior predictive distribution of a birth-death process with decreasing diversification rates applied on a published bird phylogeny (family Cettiidae). The methods described in this manuscript are implemented in the R package TESS, available from the repository CRAN (http://cran.r-project.org/web/packages/TESS/). Supplementary data are available at Bioinformatics online.

The comet moment as a measure of DNA damage in the comet assay.

PubMed

Kent, C R; Eady, J J; Ross, G M; Steel, G G

1995-06-01

The development of rapid assays of radiation-induced DNA damage requires the definition of reliable parameters for the evaluation of dose-response relationships to compare with cellular endpoints. We have used the single-cell gel electrophoresis (SCGE) or 'comet' assay to measure DNA damage in individual cells after irradiation. Both the alkaline and neutral protocols were used. In both cases, DNA was stained with ethidium bromide and viewed using a fluorescence microscope at 516-560 nm. Images of comets were stored as 512 x 512 pixel images using OPTIMAS, an image analysis software package. Using this software we tested various parameters for measuring DNA damage. We have developed a method of analysis that rigorously conforms to the mathematical definition of the moment of inertia of a plane figure. This parameter does not require the identification of separate head and tail regions, but rather calculates a moment of the whole comet image. We have termed this parameter 'comet moment'. This method is simple to calculate and can be performed using most image analysis software packages that support macro facilities. In experiments on CHO-K1 cells, tail length was found to increase linearly with dose, but plateaued at higher doses. Comet moment also increased linearly with dose, but over a larger dose range than tail length and had no tendency to plateau.

The asymmetric effect of coal price on the China's macro economy using NARDL model

NASA Astrophysics Data System (ADS)

Hou, J. C.; Yang, M. C.

2016-08-01

The present work endeavors to explore the asymmetric effect of coal price on the China's macro economy by applying nonlinear autoregressive distributed lag (NARDL) model for the period of January 2005 to June 2015. The obtained results indicate that the coal price has a strong asymmetric effect on China's macro economy in the long-run. Namely one percent increase in coal price leads to 0.6194 percent of the China's macro economy increase; and while the coal price is reduces by 1 percent, the China's macro economy will decrease by 0.008 percent. These data indicate that when coal price rises, the effect on China's macro economy is far greater than the price decline. In the short-run, coal price fluctuation has a positive effect on the China's macro economy.

Comparative phyloinformatics of virus genes at micro and macro levels in a distributed computing environment.

PubMed

Singh, Dadabhai T; Trehan, Rahul; Schmidt, Bertil; Bretschneider, Timo

2008-01-01

Preparedness for a possible global pandemic caused by viruses such as the highly pathogenic influenza A subtype H5N1 has become a global priority. In particular, it is critical to monitor the appearance of any new emerging subtypes. Comparative phyloinformatics can be used to monitor, analyze, and possibly predict the evolution of viruses. However, in order to utilize the full functionality of available analysis packages for large-scale phyloinformatics studies, a team of computer scientists, biostatisticians and virologists is needed--a requirement which cannot be fulfilled in many cases. Furthermore, the time complexities of many algorithms involved leads to prohibitive runtimes on sequential computer platforms. This has so far hindered the use of comparative phyloinformatics as a commonly applied tool in this area. In this paper the graphical-oriented workflow design system called Quascade and its efficient usage for comparative phyloinformatics are presented. In particular, we focus on how this task can be effectively performed in a distributed computing environment. As a proof of concept, the designed workflows are used for the phylogenetic analysis of neuraminidase of H5N1 isolates (micro level) and influenza viruses (macro level). The results of this paper are hence twofold. Firstly, this paper demonstrates the usefulness of a graphical user interface system to design and execute complex distributed workflows for large-scale phyloinformatics studies of virus genes. Secondly, the analysis of neuraminidase on different levels of complexity provides valuable insights of this virus's tendency for geographical based clustering in the phylogenetic tree and also shows the importance of glycan sites in its molecular evolution. The current study demonstrates the efficiency and utility of workflow systems providing a biologist friendly approach to complex biological dataset analysis using high performance computing. In particular, the utility of the platform Quascade for deploying distributed and parallelized versions of a variety of computationally intensive phylogenetic algorithms has been shown. Secondly, the analysis of the utilized H5N1 neuraminidase datasets at macro and micro levels has clearly indicated a pattern of spatial clustering of the H5N1 viral isolates based on geographical distribution rather than temporal or host range based clustering.

Teaching Conversations with the XDS Sigma 7. Systems Description.

ERIC Educational Resources Information Center

Bork, Alfred M.; Mosmann, Charles

Some computers permit conventional programing languages to be extended by the use of macro-instructions, a sophisticated programing tool which is especially useful in writing instructional dialogs. Macro-instructions (or "macro's") are complex commands defined in terms of the machine language or other macro-instructions. Like terms in…

Enhancing our Understanding of Snowfall Modes with Ground-Based Observations

NASA Astrophysics Data System (ADS)

Pettersen, C.; Kulie, M.; Petersen, W. A.; Bliven, L. F.; Wood, N.

2016-12-01

Snowfall can be broadly categorized into deep and shallow events based on the vertical distribution of the precipitating ice. Remotely sensed data refine these precipitation categories and aid in discerning the underlying macro- and microphysical mechanisms. The unique patterns in the remotely sensed instruments observations can potentially connect distinct modes of snowfall to specific processes. Though satellites can observe and recognize these patterns in snowfall, these measurements are limited - particularly in cases of shallow and light precipitation, as the snow may be too close to the surface or below the detection limits of the instrumentation. By enhancing satellite measurements with ground-based instrumentation, whether with limited-term field campaigns or long-term strategic sites, we can further our understanding and assumptions about different snowfall modes and how they are measured from spaceborne instruments. Presented are three years of data from a ground-based instrument suite consisting of a MicroRain Radar (MRR; optimized for snow events) and a Precipitation Imaging Package (PIP). These instruments are located at the Marquette, Michigan National Weather Service Weather Forecast Office to: a) use coincident meteorological measurements and observations to enhance our understanding of the thermodynamic drivers and b) showcase these instruments in an operational setting to enhance forecasts of shallow snow events. Three winters of MRR and PIP measurements are partitioned, based on meteorological surface observations, into two-dimensional histograms of reflectivity and particle size distribution data. These statistics improve our interpretation of deep versus shallow precipitation. Additionally, these statistical techniques are applied to similar datasets from Global Precipitation Measurement field campaigns for further insight into cloud and precipitation macro- and microphysical processes.

A national quitline service and its promotion in the mass media: modelling the health gain, health equity and cost-utility.

PubMed

Nghiem, Nhung; Cleghorn, Christine L; Leung, William; Nair, Nisha; Deen, Frederieke S van der; Blakely, Tony; Wilson, Nick

2017-07-24

Mass media campaigns and quitlines are both important distinct components of tobacco control programmes around the world. But when used as an integrated package, the effectiveness and cost-effectiveness are not well described. We therefore aimed to estimate the health gain, health equity impacts and cost-utility of the package of a national quitline service and its promotion in the mass media. We adapted an established Markov and multistate life-table macro-simulation model. The population was all New Zealand adults in 2011. Effect sizes and intervention costs were based on past New Zealand quitline data. Health system costs were from a national data set linking individual health events to costs. The 1-year operation of the existing intervention package of mass media promotion and quitline service was found to be net cost saving to the health sector for all age groups, sexes and ethnic groups (saving $NZ84 million; 95%uncertainty interval 60-115 million in the base-case model). It also produced greater per capita health gains for Māori (indigenous) than non-Māori (2.2 vs 0.73 quality-adjusted life-years (QALYs) per 1000 population, respectively). The net cost saving of the intervention was maintained in all sensitivity and scenario analyses for example at a discount rate of 6% and when the intervention effect size was quartered (given the possibility of residual confounding in our estimates of smoking cessation). Running the intervention for 20 years would generate an estimated 54 000 QALYs and $NZ1.10 billion (US$0.74 billion) in cost savings. The package of a quitline service and its promotion in the mass media appears to be an effective means to generate health gain, address health inequalities and save health system costs. Nevertheless, the role of this intervention needs to be compared with other tobacco control and health sector interventions, some of which may be even more cost saving. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Challenges to Bridging Field and Classroom Instruction: Exploring Field Instructors' Perspectives on Macro Practice

ERIC Educational Resources Information Center

Mehrotra, Gita R.; Tecle, Aster S.; Ha, An Thi; Ghneim, Staci; Gringeri, Christina

2018-01-01

Field education and macro practice have been highlighted as central educational domains in social work education; however, little scholarship has looked at how macro social work practice competencies have been integrated into field-based learning. This exploratory study aimed to gain perspectives from field instructors regarding macro social work…

Macro-Language Planning for Multilingual Education: Focus on Programmes and Provision

ERIC Educational Resources Information Center

Taylor-Leech, Kerry; Liddicoat, Anthony J.

2014-01-01

This overview identifies some common features of macro-level language planning and briefly summarises the changing approaches to the analysis of macro-planning in the field. It previews six cases of language-in-education planning in response to linguistic diversity presented by the contributors to this issue. The cases show how macro-planning can…

Spreadsheet macros for coloring sequence alignments.

PubMed

Haygood, M G

1993-12-01

This article describes a set of Microsoft Excel macros designed to color amino acid and nucleotide sequence alignments for review and preparation of visual aids. The colored alignments can then be modified to emphasize features of interest. Procedures for importing and coloring sequences are described. The macro file adds a new menu to the menu bar containing sequence-related commands to enable users unfamiliar with Excel to use the macros more readily. The macros were designed for use with Macintosh computers but will also run with the DOS version of Excel.

LARCMACS: A TEX macro set for typesetting NASA reports

NASA Technical Reports Server (NTRS)

Woessner, Linda H.; Mccaskill, Mary K.

1988-01-01

This LARCMACS user's manual describes the February 1988 version of LARCMACS, the TEX macro set used by the Technical Editing Branch (TEB) at NASA Langley Research Center. These macros were developed by the authors to facilitate the typesetting of NASA formal reports. They are also useful, however, for informal NASA reports and other technical documents such as meeting papers. LARCMACS are distributed by TEB for the convenience of the Langley TEX user community. LARCMACS contain macros for obtaining the standard double-column format for NASA reports, for typesetting tables in the ruled format traditional in NASA reports, and for typesetting difficult mathematical expressions. Each macro is described and numerous examples are included. Definitions of the LARCMACS macros are also included.

Studying neighborhood crime across different macro spatial scales: The case of robbery in 4 cities.

PubMed

Hipp, John R; Wo, James C; Kim, Young-An

2017-11-01

Whereas there is a burgeoning literature focusing on the spatial distribution of crime events across neighborhoods or micro-geographic units in a specific city, the present study expands this line of research by selecting four cities that vary across two macro-spatial dimensions: population in the micro-environment, and population in the broader macro-environment. We assess the relationship between measures constructed at different spatial scales and robbery rates in blocks in four cities: 1) San Francisco (high in micro- and macro-environment population); 2) Honolulu (high in micro- but low in macro-environment population); 3) Los Angeles (low in micro- but high in macro-environment population); 4) Sacramento (low in micro- and macro-environment population). Whereas the socio-demographic characteristics of residents further than ½ mile away do not impact robbery rates, the number of people up to 2.5 miles away are related to robbery rates, especially in the two cities with smaller micro-environment population, implying a larger spatial scale than is often considered. The results show that coefficient estimates differ somewhat more between cities differing in micro-environment population compared to those differing based on macro-environment population. It is therefore necessary to consider the broader macro-environment even when focusing on the level of crime across neighborhoods or micro-geographic units within an area. Copyright © 2017 Elsevier Inc. All rights reserved.

Adsorption study of a macro-RAFT agent onto SiO2-coated Gd2O3:Eu3+ nanorods: Requirements and limitations

NASA Astrophysics Data System (ADS)

Zou, Hua; Melro, Liliana; de Camargo Chaparro, Thaissa; de Souza Filho, Isnaldi Rodrigues; Ananias, Duarte; Bourgeat-Lami, Elodie; dos Santos, Amilton Martins; Barros-Timmons, Ana

2017-02-01

The use of a macromolecular RAFT (macro-RAFT) agent to encapsulate anisotropic nano-objects via emulsion polymerization is an emerging route to prepare polymer/inorganic colloidal nanocomposites. However, a number of requirements have to be fulfilled. This work aims at highlighting the effects of the preparative procedure and dispersion method on the amount of macro-RAFT agent adsorbed onto SiO2-coated Gd2O3:Eu3+ nanorods. The adsorption of macro-RAFT agent was studied using the depletion method with UV-vis spectrophotometry. Measurements were performed at a fixed concentration of nanorods and varying concentrations of the macro-RAFT agent in aqueous dispersion at room temperature. The adsorption isotherms showed that for the same initial macro-RAFT agent concentration, the highest adsorption capacity of the macro-RAFT agent on nanorods was usually achieved for non-calcined thin SiO2-coated nanorods under mild bath sonication.

Filtered cathodic arc deposition apparatus and method

DOEpatents

Krauss, Alan R.

1999-01-01

A filtered cathodic arc deposition method and apparatus for the production of highly dense, wear resistant coatings which are free from macro particles. The filtered cathodic arc deposition apparatus includes a cross shaped vacuum chamber which houses a cathode target having an evaporable surface comprised of the coating material, means for generating a stream of plasma, means for generating a transverse magnetic field, and a macro particle deflector. The transverse magnetic field bends the generated stream of plasma in the direction of a substrate. Macro particles are effectively filtered from the stream of plasma by traveling, unaffected by the transverse magnetic field, along the initial path of the plasma stream to a macro particle deflector. The macro particle deflector has a preformed surface which deflects macro particles away from the substrate.

Quantifying causal emergence shows that macro can beat micro.

PubMed

Hoel, Erik P; Albantakis, Larissa; Tononi, Giulio

2013-12-03

Causal interactions within complex systems can be analyzed at multiple spatial and temporal scales. For example, the brain can be analyzed at the level of neurons, neuronal groups, and areas, over tens, hundreds, or thousands of milliseconds. It is widely assumed that, once a micro level is fixed, macro levels are fixed too, a relation called supervenience. It is also assumed that, although macro descriptions may be convenient, only the micro level is causally complete, because it includes every detail, thus leaving no room for causation at the macro level. However, this assumption can only be evaluated under a proper measure of causation. Here, we use a measure [effective information (EI)] that depends on both the effectiveness of a system's mechanisms and the size of its state space: EI is higher the more the mechanisms constrain the system's possible past and future states. By measuring EI at micro and macro levels in simple systems whose micro mechanisms are fixed, we show that for certain causal architectures EI can peak at a macro level in space and/or time. This happens when coarse-grained macro mechanisms are more effective (more deterministic and/or less degenerate) than the underlying micro mechanisms, to an extent that overcomes the smaller state space. Thus, although the macro level supervenes upon the micro, it can supersede it causally, leading to genuine causal emergence--the gain in EI when moving from a micro to a macro level of analysis.

Method of producing microchannel and nanochannel articles

DOEpatents

D'Urso, Brian R.

2010-05-04

A method of making an article having channels therethrough includes the steps of: providing a ductile structure defining at least one macro-channel, the macro-channel containing a salt; drawing the ductile structure in the axial direction of the at least one macro-channel to reduce diameter of the macro-channel; and contacting the salt with a solvent to dissolve the salt to produce an article having at least one microchannel.

Macroprolactin, big-prolactin and potential effects on the misdiagnosis of hyperprolactinemia using the Beckman Coulter Access Prolactin assay.

PubMed

Ellis, M Jane; Livesey, John H; Soule, Steven G

2006-10-01

To examine whether use of the Beckman Coulter Access Prolactin (PRL) assay, which has low reactivity with macro-PRL, obviates the need for screening hyperprolactinemic samples. Samples from 1020 hyperprolactinemic individuals and 401 healthy volunteers were treated with polyethylene glycol (PEG). Macro-PRL was assessed from (1) percent PRL recovery, using cut-off values derived by gel filtration chromatography (GFC) and (2) significant (p<0.05) normalisation of PRL following PEG. PRL recovery was similar in volunteer and hyperprolactinemic samples (mean+/-SD 101+/-13% and 101+/-19%, respectively). In hyperprolactinemic samples, macro-PRL was identified from PRL recovery in 9.7%, although levels were moderate to high in only 3.9%. The total PRL normalised following PEG in 7.4%. Correlations of PRL recovery with the proportions of macro-, big- and monomeric PRL following GFC (n=30 samples, range of PRL and macro-PRL levels) were -0.89, -0.20 and 0.92, respectively. The big-PRL content was 0-28%. Regression analysis suggested that PEG precipitated both macro-PRL and big-PRL. Using the Access assay, macro-PRL can cause apparent hyperprolactinemia and big-PRL may cause misclassification of individuals. Screening using PEG is applicable to assays with low macro-PRL reactivity provided specific reference values are derived.

Master standard data quantity food production code. Macro elements for synthesizing production labor time.

PubMed

Matthews, M E; Waldvogel, C F; Mahaffey, M J; Zemel, P C

1978-06-01

Preparation procedures of standardized quantity formulas were analyzed for similarities and differences in production activities, and three entrée classifications were developed, based on these activities. Two formulas from each classification were selected, preparation procedures were divided into elements of production, and the MSD Quantity Food Production Code was applied. Macro elements not included in the existing Code were simulated, coded, assigned associated Time Measurement Units, and added to the MSD Quantity Food Production Code. Repeated occurrence of similar elements within production methods indicated that macro elements could be synthesized for use within one or more entrée classifications. Basic elements were grouped, simulated, and macro elements were derived. Macro elements were applied in the simulated production of 100 portions of each entrée formula. Total production time for each formula and average production time for each entrée classification were calculated. Application of macro elements indicated that this method of predetermining production time was feasible and could be adapted by quantity foodservice managers as a decision technique used to evaluate menu mix, production personnel schedules, and allocation of equipment usage. These macro elements could serve as a basis for further development and refinement of other macro elements which could be applied to a variety of menu item formulas.

An Excel macro for generating trilinear plots.

PubMed

Shikaze, Steven G; Crowe, Allan S

2007-01-01

This computer note describes a method for creating trilinear plots in Microsoft Excel. Macros have been created in MS Excel's internal language: Visual Basic for Applications (VBA). A simple form has been set up to allow the user to input data from an Excel worksheet. The VBA macro is used to convert the triangular data (which consist of three columns of percentage data) into X-Y data. The macro then generates the axes, labels, and grid for the trilinear plot. The X-Y data are plotted as scatter data in Excel. By providing this macro in Excel, users can create trilinear plots in a quick, inexpensive manner.

JMorph: Software for performing rapid morphometric measurements on digital images of fossil assemblages

NASA Astrophysics Data System (ADS)

Lelièvre, Peter G.; Grey, Melissa

2017-08-01

Quantitative morphometric analyses of form are widely used in palaeontology, especially for taxonomic and evolutionary research. These analyses can involve several measurements performed on hundreds or even thousands of samples. Performing measurements of size and shape on large assemblages of macro- or microfossil samples is generally infeasible or impossible with traditional instruments such as vernier calipers. Instead, digital image processing software is required to perform measurements via suitable digital images of samples. Many software packages exist for morphometric analyses but there is not much available for the integral stage of data collection, particularly for the measurement of the outlines of samples. Some software exists to automatically detect the outline of a fossil sample from a digital image. However, automatic outline detection methods may perform inadequately when samples have incomplete outlines or images contain poor contrast between the sample and staging background. Hence, a manual digitization approach may be the only option. We are not aware of any software packages that are designed specifically for efficient digital measurement of fossil assemblages with numerous samples, especially for the purposes of manual outline analysis. Throughout several previous studies, we have developed a new software tool, JMorph, that is custom-built for that task. JMorph provides the means to perform many different types of measurements, which we describe in this manuscript. We focus on JMorph's ability to rapidly and accurately digitize the outlines of fossils. JMorph is freely available from the authors.

Sequential use of the STICS crop model and of the MACRO pesticide fate model to simulate pesticides leaching in cropping systems.

PubMed

Lammoglia, Sabine-Karen; Moeys, Julien; Barriuso, Enrique; Larsbo, Mats; Marín-Benito, Jesús-María; Justes, Eric; Alletto, Lionel; Ubertosi, Marjorie; Nicolardot, Bernard; Munier-Jolain, Nicolas; Mamy, Laure

2017-03-01

The current challenge in sustainable agriculture is to introduce new cropping systems to reduce pesticides use in order to reduce ground and surface water contamination. However, it is difficult to carry out in situ experiments to assess the environmental impacts of pesticide use for all possible combinations of climate, crop, and soils; therefore, in silico tools are necessary. The objective of this work was to assess pesticides leaching in cropping systems coupling the performances of a crop model (STICS) and of a pesticide fate model (MACRO). STICS-MACRO has the advantage of being able to simulate pesticides fate in complex cropping systems and to consider some agricultural practices such as fertilization, mulch, or crop residues management, which cannot be accounted for with MACRO. The performance of STICS-MACRO was tested, without calibration, from measurements done in two French experimental sites with contrasted soil and climate properties. The prediction of water percolation and pesticides concentrations with STICS-MACRO was satisfactory, but it varied with the pedoclimatic context. The performance of STICS-MACRO was shown to be similar or better than that of MACRO. The improvement of the simulation of crop growth allowed better estimate of crop transpiration therefore of water balance. It also allowed better estimate of pesticide interception by the crop which was found to be crucial for the prediction of pesticides concentrations in water. STICS-MACRO is a new promising tool to improve the assessment of the environmental risks of pesticides used in cropping systems.

Development of the Macro Command Editing Executive System for Factory Workers-Oriented Programless Visual Inspection System

NASA Astrophysics Data System (ADS)

Anezaki, Takashi; Wakitani, Kouichi; Nakamura, Masatoshi; Kubo, Hiroyasu

Because visual inspection systems are difficult to tune, they create many problems for the kaizen process. This results in increased development costs and time to assure that the inspection systems function properly. In order to improve inspection system development, we designed an easy-tuning system called a “Program-less” visual inspection system. The ROI macro command which consisted of eight kinds of shape recognition macro commands and decision, operation, control commands was built. Furthermore, the macro command editing executive system was developed by the operation of only the GUI without editing source program. The validity of the ROI macro command was proved by the application of 488 places.

Primordial 4He constraints on inelastic macro dark matter revisited

NASA Astrophysics Data System (ADS)

Jacobs, David M.; Allwright, Gwyneth; Mafune, Mpho; Manikumar, Samyukta; Weltman, Amanda

2016-11-01

At present, the best model for the evolution of the cosmos requires that dark matter make up approximately 25% of the energy content of the Universe. Most approaches to explain the microscopic nature of dark matter, to date, have assumed its composition to be of intrinsically weakly interacting particles; however, this need not be the case to have consistency with all extant observations. Given decades of inconclusive evidence to support any dark matter candidate, there is strong motivation to consider alternatives to the standard particle scenario. One such example is macro dark matter, a class of candidates (macros) that could interact strongly with the particles of the Standard Model, have large masses and physical sizes, and yet behave as dark matter. Macros that scatter completely inelastically could have altered the primordial production of the elements, and macro charge-dependent constraints have been obtained previously. Here we reconsider the phenomenology of inelastically interacting macros on the abundance of primordially produced 4He and revise previous constraints by also taking into account improved measurements of the primordial 4He abundance. The constraints derived here are limited in applicability to only leptophobic macros that have a surface potential V (RX)≳0.5 MeV . However, an important conclusion from our analysis is that even neutral macros would likely affect the abundance of the light elements. Therefore, constraints on that scenario are possible and are currently an open question.

A Microsoft-Excel-based tool for running and critically appraising network meta-analyses--an overview and application of NetMetaXL.

PubMed

Brown, Stephen; Hutton, Brian; Clifford, Tammy; Coyle, Doug; Grima, Daniel; Wells, George; Cameron, Chris

2014-09-29

The use of network meta-analysis has increased dramatically in recent years. WinBUGS, a freely available Bayesian software package, has been the most widely used software package to conduct network meta-analyses. However, the learning curve for WinBUGS can be daunting, especially for new users. Furthermore, critical appraisal of network meta-analyses conducted in WinBUGS can be challenging given its limited data manipulation capabilities and the fact that generation of graphical output from network meta-analyses often relies on different software packages than the analyses themselves. We developed a freely available Microsoft-Excel-based tool called NetMetaXL, programmed in Visual Basic for Applications, which provides an interface for conducting a Bayesian network meta-analysis using WinBUGS from within Microsoft Excel. . This tool allows the user to easily prepare and enter data, set model assumptions, and run the network meta-analysis, with results being automatically displayed in an Excel spreadsheet. It also contains macros that use NetMetaXL's interface to generate evidence network diagrams, forest plots, league tables of pairwise comparisons, probability plots (rankograms), and inconsistency plots within Microsoft Excel. All figures generated are publication quality, thereby increasing the efficiency of knowledge transfer and manuscript preparation. We demonstrate the application of NetMetaXL using data from a network meta-analysis published previously which compares combined resynchronization and implantable defibrillator therapy in left ventricular dysfunction. We replicate results from the previous publication while demonstrating result summaries generated by the software. Use of the freely available NetMetaXL successfully demonstrated its ability to make running network meta-analyses more accessible to novice WinBUGS users by allowing analyses to be conducted entirely within Microsoft Excel. NetMetaXL also allows for more efficient and transparent critical appraisal of network meta-analyses, enhanced standardization of reporting, and integration with health economic evaluations which are frequently Excel-based.

A Microsoft-Excel-based tool for running and critically appraising network meta-analyses—an overview and application of NetMetaXL

PubMed Central

2014-01-01

Background The use of network meta-analysis has increased dramatically in recent years. WinBUGS, a freely available Bayesian software package, has been the most widely used software package to conduct network meta-analyses. However, the learning curve for WinBUGS can be daunting, especially for new users. Furthermore, critical appraisal of network meta-analyses conducted in WinBUGS can be challenging given its limited data manipulation capabilities and the fact that generation of graphical output from network meta-analyses often relies on different software packages than the analyses themselves. Methods We developed a freely available Microsoft-Excel-based tool called NetMetaXL, programmed in Visual Basic for Applications, which provides an interface for conducting a Bayesian network meta-analysis using WinBUGS from within Microsoft Excel. . This tool allows the user to easily prepare and enter data, set model assumptions, and run the network meta-analysis, with results being automatically displayed in an Excel spreadsheet. It also contains macros that use NetMetaXL’s interface to generate evidence network diagrams, forest plots, league tables of pairwise comparisons, probability plots (rankograms), and inconsistency plots within Microsoft Excel. All figures generated are publication quality, thereby increasing the efficiency of knowledge transfer and manuscript preparation. Results We demonstrate the application of NetMetaXL using data from a network meta-analysis published previously which compares combined resynchronization and implantable defibrillator therapy in left ventricular dysfunction. We replicate results from the previous publication while demonstrating result summaries generated by the software. Conclusions Use of the freely available NetMetaXL successfully demonstrated its ability to make running network meta-analyses more accessible to novice WinBUGS users by allowing analyses to be conducted entirely within Microsoft Excel. NetMetaXL also allows for more efficient and transparent critical appraisal of network meta-analyses, enhanced standardization of reporting, and integration with health economic evaluations which are frequently Excel-based. PMID:25267416

Multiscale, Converging Defects of Macro-Porosity, Microstructure and Matrix Mineralization Impact Long Bone Fragility in NF1

PubMed Central

Kühnisch, Jirko; Seto, Jong; Lange, Claudia; Schrof, Susanne; Stumpp, Sabine; Kobus, Karolina; Grohmann, Julia; Kossler, Nadine; Varga, Peter; Osswald, Monika; Emmerich, Denise; Tinschert, Sigrid; Thielemann, Falk; Duda, Georg; Seifert, Wenke; el Khassawna, Thaqif; Stevenson, David A.; Elefteriou, Florent; Kornak, Uwe; Raum, Kay; Fratzl, Peter; Mundlos, Stefan; Kolanczyk, Mateusz

2014-01-01

Bone fragility due to osteopenia, osteoporosis or debilitating focal skeletal dysplasias is a frequent observation in the Mendelian disease Neurofibromatosis type 1 (NF1). To determine the mechanisms underlying bone fragility in NF1 we analyzed two conditional mouse models, Nf1Prx1 (limb knock-out) and Nf1Col1 (osteoblast specific knock-out), as well as cortical bone samples from individuals with NF1. We examined mouse bone tissue with micro-computed tomography, qualitative and quantitative histology, mechanical tensile analysis, small-angle X-ray scattering (SAXS), energy dispersive X-ray spectroscopy (EDX), and scanning acoustic microscopy (SAM). In cortical bone of Nf1Prx1 mice we detected ectopic blood vessels that were associated with diaphyseal mineralization defects. Defective mineral binding in the proximity of blood vessels was most likely due to impaired bone collagen formation, as these areas were completely devoid of acidic matrix proteins and contained thin collagen fibers. Additionally, we found significantly reduced mechanical strength of the bone material, which was partially caused by increased osteocyte volume. Consistent with these observations, bone samples from individuals with NF1 and tibial dysplasia showed increased osteocyte lacuna volume. Reduced mechanical properties were associated with diminished matrix stiffness, as determined by SAM. In line with these observations, bone tissue from individuals with NF1 and tibial dysplasia showed heterogeneous mineralization and reduced collagen fiber thickness and packaging. Collectively, the data indicate that bone fragility in NF1 tibial dysplasia is partly due to an increased osteocyte-related micro-porosity, hypomineralization, a generalized defect of organic matrix formation, exacerbated in the regions of tensional and bending force integration, and finally persistence of ectopic blood vessels associated with localized macro-porotic bone lesions. PMID:24465906

[Effects of macro-jellyfish abundance dynamics on fishery resource structure in the Yangtze River estuary and its adjacent waters].

PubMed

Shan, Xiu-Juan; Zhuang, Zhi-Meng; Jin, Xian-Shi; Dai, Fang-Qun

2011-12-01

Based on the bottom trawl survey data in May 2007 and May and June 2008, this paper analyzed the effects of the abundance dynamics of macro-jellyfish on the species composition, distribution, and abundance of fishery resource in the Yangtze River estuary and its adjacent waters. From May 2007 to June 2008, the average catch per haul and the top catch per haul of macro-jellyfish increased, up to 222.2 kg x h(-1) and 1800 kg x h(-1) in June 2008, respectively. The macro-jellyfish were mainly distributed in the areas around 50 m isobath, and not beyond 100 m isobath where was the joint front of the coastal waters of East China Sea, Yangtze River runoff, and Taiwan Warm Current. The main distribution area of macro-jellyfish in June migrated northward, as compared with that in May, and the highest catches of macro-jellyfish in May 2007 and May 2008 were found in the same sampling station (122.5 degrees E, 28.5 degrees N). In the sampling stations with higher abundance of macro-jellyfish, the fishery abundance was low, and the fishery species also changed greatly, mainly composed by small-sized species (Trachurus japonicus, Harpadon nehereus, and Acropoma japonicum) and pelagic species (Psenopsis anomala, Octopus variabilis) and Trichiurus japonicus, and P. anomala accounted for 23.7% of the total catch in June 2008. Larimichthys polyactis also occupied higher proportion of the total catch in sampling stations with higher macro-jellyfish abundance, but the demersal species Lophius litulon was not found, and a few crustaceans were collected. This study showed that macro-jellyfish had definite negative effects on the fishery community structure and abundance in the Yangtze River estuary fishery ecosystem, and further, changed the energy flow patterns of the ecosystem through cascading trophic interactions. Therefore, macro-jellyfish was strongly suggested to be an independent ecological group when the corresponding fishery management measures were considered.

Crowd macro state detection using entropy model

NASA Astrophysics Data System (ADS)

Zhao, Ying; Yuan, Mengqi; Su, Guofeng; Chen, Tao

2015-08-01

In the crowd security research area a primary concern is to identify the macro state of crowd behaviors to prevent disasters and to supervise the crowd behaviors. The entropy is used to describe the macro state of a self-organization system in physics. The entropy change indicates the system macro state change. This paper provides a method to construct crowd behavior microstates and the corresponded probability distribution using the individuals' velocity information (magnitude and direction). Then an entropy model was built up to describe the crowd behavior macro state. Simulation experiments and video detection experiments were conducted. It was verified that in the disordered state, the crowd behavior entropy is close to the theoretical maximum entropy; while in ordered state, the entropy is much lower than half of the theoretical maximum entropy. The crowd behavior macro state sudden change leads to the entropy change. The proposed entropy model is more applicable than the order parameter model in crowd behavior detection. By recognizing the entropy mutation, it is possible to detect the crowd behavior macro state automatically by utilizing cameras. Results will provide data support on crowd emergency prevention and on emergency manual intervention.

Improvement of aquaponic performance through micro- and macro-nutrient addition.

PubMed

Ru, Dongyun; Liu, Jikai; Hu, Zhen; Zou, Yina; Jiang, Liping; Cheng, Xiaodian; Lv, Zhenting

2017-07-01

Aquaponics is one of the "zero waste" industry in the twenty-first century, and is considered to be one of the major trends for the future development of agriculture. However, the low nitrogen utilization efficiency (NUE) restricted its widely application. To date, many attempts have been conducted to improve its NUE. In the present study, effect of micro- and macro-nutrient addition on performance of tilapia-pak choi aquaponics was investigated. Results showed that the addition of micro- and macro-nutrients improved the growth of plant directly and facilitated fish physiology indirectly, which subsequently increased NUE of aquaponics from 40.42 to 50.64%. In addition, remarkable lower total phosphorus concentration was obtained in aquaponics with micro- and macro-nutrient addition, which was attributed to the formation of struvite. Most of the added micro-nutrients were enriched in plant root, while macro-nutrients mainly existed in water. Moreover, no enrichment of micro- and macro-nutrients in aquaponic products (i.e., fish and plant leaves) was observed, indicating that it had no influence on food safety. The findings here reported manifest that appropriate addition of micro- and macro-nutrients to aquaponics is necessary, and would improve its economic feasibility.

The Use of Lotus 1-2-3 Macros in Engineering Calculations.

ERIC Educational Resources Information Center

Rosen, Edward M.

1990-01-01

Described are the use of spreadsheet programs in chemical engineering calculations using Lotus 1-2-3 macros. Discusses the macro commands, subroutine operations, and solution of partial differential equation. Provides examples of the subroutine programs and spreadsheet solution. (YP)

Complex fluids with mobile charge-regulating macro-ions

NASA Astrophysics Data System (ADS)

Markovich, Tomer; Andelman, David; Podgornik, Rudi

2017-10-01

We generalize the concept of charge regulation of ionic solutions, and apply it to complex fluids with mobile macro-ions having internal non-electrostatic degrees of freedom. The suggested framework provides a convenient tool for investigating systems where mobile macro-ions can self-regulate their charge (e.g., proteins). We show that even within a simplified charge-regulation model, the charge dissociation equilibrium results in different and notable properties. Consequences of the charge regulation include a positional dependence of the effective charge of the macro-ions, a non-monotonic dependence of the effective Debye screening length on the concentration of the monovalent salt, a modification of the electric double-layer structure, and buffering by the macro-ions of the background electrolyte.

The relationship between venture capital investment and macro economic variables via statistical computation method

NASA Astrophysics Data System (ADS)

Aygunes, Gunes

2017-07-01

The objective of this paper is to survey and determine the macroeconomic factors affecting the level of venture capital (VC) investments in a country. The literary depends on venture capitalists' quality and countries' venture capital investments. The aim of this paper is to give relationship between venture capital investment and macro economic variables via statistical computation method. We investigate the countries and macro economic variables. By using statistical computation method, we derive correlation between venture capital investments and macro economic variables. According to method of logistic regression model (logit regression or logit model), macro economic variables are correlated with each other in three group. Venture capitalists regard correlations as a indicator. Finally, we give correlation matrix of our results.

Macros for Educational Research.

ERIC Educational Resources Information Center

Woodrow, Janice E. J.

1988-01-01

Describes the design and operation of two macros written in the programming language of Microsoft's EXCEL for educational research applications. The first macro determines the frequency of responses to a Likert-type questionnaire or multiple-choice test; the second performs a one-way analysis of variance test. (Author/LRW)

Output power fluctuations due to different weights of macro particles used in particle-in-cell simulations of Cerenkov devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bao, Rong; Li, Yongdong; Liu, Chunliang

2016-07-15

The output power fluctuations caused by weights of macro particles used in particle-in-cell (PIC) simulations of a backward wave oscillator and a travelling wave tube are statistically analyzed. It is found that the velocities of electrons passed a specific slow-wave structure form a specific electron velocity distribution. The electron velocity distribution obtained in PIC simulation with a relative small weight of macro particles is considered as an initial distribution. By analyzing this initial distribution with a statistical method, the estimations of the output power fluctuations caused by different weights of macro particles are obtained. The statistical method is verified bymore » comparing the estimations with the simulation results. The fluctuations become stronger with increasing weight of macro particles, which can also be determined reversely from estimations of the output power fluctuations. With the weights of macro particles optimized by the statistical method, the output power fluctuations in PIC simulations are relatively small and acceptable.« less

Study on Finite Element Model Updating in Highway Bridge Static Loading Test Using Spatially-Distributed Optical Fiber Sensors

PubMed Central

Wu, Bitao; Lu, Huaxi; Chen, Bo; Gao, Zhicheng

2017-01-01

A finite model updating method that combines dynamic-static long-gauge strain responses is proposed for highway bridge static loading tests. For this method, the objective function consisting of static long-gauge stains and the first order modal macro-strain parameter (frequency) is established, wherein the local bending stiffness, density and boundary conditions of the structures are selected as the design variables. The relationship between the macro-strain and local element stiffness was studied first. It is revealed that the macro-strain is inversely proportional to the local stiffness covered by the long-gauge strain sensor. This corresponding relation is important for the modification of the local stiffness based on the macro-strain. The local and global parameters can be simultaneously updated. Then, a series of numerical simulation and experiments were conducted to verify the effectiveness of the proposed method. The results show that the static deformation, macro-strain and macro-strain modal can be predicted well by using the proposed updating model. PMID:28753912

MacroH2A1.1 regulates mitochondrial respiration by limiting nuclear NAD+ consumption.

PubMed

Posavec Marjanović, Melanija; Hurtado-Bagès, Sarah; Lassi, Maximilian; Valero, Vanesa; Malinverni, Roberto; Delage, Hélène; Navarro, Miriam; Corujo, David; Guberovic, Iva; Douet, Julien; Gama-Perez, Pau; Garcia-Roves, Pablo M; Ahel, Ivan; Ladurner, Andreas G; Yanes, Oscar; Bouvet, Philippe; Suelves, Mònica; Teperino, Raffaele; Pospisilik, J Andrew; Buschbeck, Marcus

2017-11-01

Histone variants are structural components of eukaryotic chromatin that can replace replication-coupled histones in the nucleosome. The histone variant macroH2A1.1 contains a macrodomain capable of binding NAD + -derived metabolites. Here we report that macroH2A1.1 is rapidly induced during myogenic differentiation through a switch in alternative splicing, and that myotubes that lack macroH2A1.1 have a defect in mitochondrial respiratory capacity. We found that the metabolite-binding macrodomain was essential for sustained optimal mitochondrial function but dispensable for gene regulation. Through direct binding, macroH2A1.1 inhibits basal poly-ADP ribose polymerase 1 (PARP-1) activity and thus reduces nuclear NAD + consumption. The resultant accumulation of the NAD + precursor NMN allows for maintenance of mitochondrial NAD + pools that are critical for respiration. Our data indicate that macroH2A1.1-containing chromatin regulates mitochondrial respiration by limiting nuclear NAD + consumption and establishing a buffer of NAD + precursors in differentiated cells.

Study on Finite Element Model Updating in Highway Bridge Static Loading Test Using Spatially-Distributed Optical Fiber Sensors.

PubMed

Wu, Bitao; Lu, Huaxi; Chen, Bo; Gao, Zhicheng

2017-07-19

A finite model updating method that combines dynamic-static long-gauge strain responses is proposed for highway bridge static loading tests. For this method, the objective function consisting of static long-gauge stains and the first order modal macro-strain parameter (frequency) is established, wherein the local bending stiffness, density and boundary conditions of the structures are selected as the design variables. The relationship between the macro-strain and local element stiffness was studied first. It is revealed that the macro-strain is inversely proportional to the local stiffness covered by the long-gauge strain sensor. This corresponding relation is important for the modification of the local stiffness based on the macro-strain. The local and global parameters can be simultaneously updated. Then, a series of numerical simulation and experiments were conducted to verify the effectiveness of the proposed method. The results show that the static deformation, macro-strain and macro-strain modal can be predicted well by using the proposed updating model.

search GenBank: interactive orchestration and ad-hoc choreography of Web services in the exploration of the biomedical resources of the National Center For Biotechnology Information

PubMed Central

2013-01-01

Background Due to the growing number of biomedical entries in data repositories of the National Center for Biotechnology Information (NCBI), it is difficult to collect, manage and process all of these entries in one place by third-party software developers without significant investment in hardware and software infrastructure, its maintenance and administration. Web services allow development of software applications that integrate in one place the functionality and processing logic of distributed software components, without integrating the components themselves and without integrating the resources to which they have access. This is achieved by appropriate orchestration or choreography of available Web services and their shared functions. After the successful application of Web services in the business sector, this technology can now be used to build composite software tools that are oriented towards biomedical data processing. Results We have developed a new tool for efficient and dynamic data exploration in GenBank and other NCBI databases. A dedicated search GenBank system makes use of NCBI Web services and a package of Entrez Programming Utilities (eUtils) in order to provide extended searching capabilities in NCBI data repositories. In search GenBank users can use one of the three exploration paths: simple data searching based on the specified user’s query, advanced data searching based on the specified user’s query, and advanced data exploration with the use of macros. search GenBank orchestrates calls of particular tools available through the NCBI Web service providing requested functionality, while users interactively browse selected records in search GenBank and traverse between NCBI databases using available links. On the other hand, by building macros in the advanced data exploration mode, users create choreographies of eUtils calls, which can lead to the automatic discovery of related data in the specified databases. Conclusions search GenBank extends standard capabilities of the NCBI Entrez search engine in querying biomedical databases. The possibility of creating and saving macros in the search GenBank is a unique feature and has a great potential. The potential will further grow in the future with the increasing density of networks of relationships between data stored in particular databases. search GenBank is available for public use at http://sgb.biotools.pl/. PMID:23452691

search GenBank: interactive orchestration and ad-hoc choreography of Web services in the exploration of the biomedical resources of the National Center For Biotechnology Information.

PubMed

Mrozek, Dariusz; Małysiak-Mrozek, Bożena; Siążnik, Artur

2013-03-01

Due to the growing number of biomedical entries in data repositories of the National Center for Biotechnology Information (NCBI), it is difficult to collect, manage and process all of these entries in one place by third-party software developers without significant investment in hardware and software infrastructure, its maintenance and administration. Web services allow development of software applications that integrate in one place the functionality and processing logic of distributed software components, without integrating the components themselves and without integrating the resources to which they have access. This is achieved by appropriate orchestration or choreography of available Web services and their shared functions. After the successful application of Web services in the business sector, this technology can now be used to build composite software tools that are oriented towards biomedical data processing. We have developed a new tool for efficient and dynamic data exploration in GenBank and other NCBI databases. A dedicated search GenBank system makes use of NCBI Web services and a package of Entrez Programming Utilities (eUtils) in order to provide extended searching capabilities in NCBI data repositories. In search GenBank users can use one of the three exploration paths: simple data searching based on the specified user's query, advanced data searching based on the specified user's query, and advanced data exploration with the use of macros. search GenBank orchestrates calls of particular tools available through the NCBI Web service providing requested functionality, while users interactively browse selected records in search GenBank and traverse between NCBI databases using available links. On the other hand, by building macros in the advanced data exploration mode, users create choreographies of eUtils calls, which can lead to the automatic discovery of related data in the specified databases. search GenBank extends standard capabilities of the NCBI Entrez search engine in querying biomedical databases. The possibility of creating and saving macros in the search GenBank is a unique feature and has a great potential. The potential will further grow in the future with the increasing density of networks of relationships between data stored in particular databases. search GenBank is available for public use at http://sgb.biotools.pl/.

Intersection crash prediction modeling with macro-level data from various geographic units.

PubMed

Lee, Jaeyoung; Abdel-Aty, Mohamed; Cai, Qing

2017-05-01

There have been great efforts to develop traffic crash prediction models for various types of facilities. The crash models have played a key role to identify crash hotspots and evaluate safety countermeasures. In recent, many macro-level crash prediction models have been developed to incorporate highway safety considerations in the long-term transportation planning process. Although the numerous macro-level studies have found that a variety of demographic and socioeconomic zonal characteristics have substantial effects on traffic safety, few studies have attempted to coalesce micro-level with macro-level data from existing geographic units for estimating crash models. In this study, the authors have developed a series of intersection crash models for total, severe, pedestrian, and bicycle crashes with macro-level data for seven spatial units. The study revealed that the total, severe, and bicycle crash models with ZIP-code tabulation area data performs the best, and the pedestrian crash models with census tract-based data outperforms the competing models. Furthermore, it was uncovered that intersection crash models can be drastically improved by only including random-effects for macro-level entities. Besides, the intersection crash models are even further enhanced by including other macro-level variables. Lastly, the pedestrian and bicycle crash modeling results imply that several macro-level variables (e.g., population density, proportions of specific age group, commuters who walk, or commuters using bicycle, etc.) can be a good surrogate exposure for those crashes. Copyright © 2017 Elsevier Ltd. All rights reserved.

MAT - MULTI-ATTRIBUTE TASK BATTERY FOR HUMAN OPERATOR WORKLOAD AND STRATEGIC BEHAVIOR RESEARCH

NASA Technical Reports Server (NTRS)

Comstock, J. R.

1994-01-01

MAT, a Multi-Attribute Task battery, gives the researcher the capability of performing multi-task workload and performance experiments. The battery provides a benchmark set of tasks for use in a wide range of laboratory studies of operator performance and workload. MAT incorporates tasks analogous to activities that aircraft crew members perform in flight, while providing a high degree of experiment control, performance data on each subtask, and freedom to use non-pilot test subjects. The MAT battery primary display is composed of four separate task windows which are as follows: a monitoring task window which includes gauges and warning lights, a tracking task window for the demands of manual control, a communication task window to simulate air traffic control communications, and a resource management task window which permits maintaining target levels on a fuel management task. In addition, a scheduling task window gives the researcher information about future task demands. The battery also provides the option of manual or automated control of tasks. The task generates performance data for each subtask. The task battery may be paused and onscreen workload rating scales presented to the subject. The MAT battery was designed to use a serially linked second computer to generate the voice messages for the Communications task. The MATREMX program and support files, which are included in the MAT package, were designed to work with the Heath Voice Card (Model HV-2000, available through the Heath Company, Benton Harbor, Michigan 49022); however, the MATREMX program and support files may easily be modified to work with other voice synthesizer or digitizer cards. The MAT battery task computer may also be used independent of the voice computer if no computer synthesized voice messages are desired or if some other method of presenting auditory messages is devised. MAT is written in QuickBasic and assembly language for IBM PC series and compatible computers running MS-DOS. The code in MAT is written for Microsoft QuickBasic 4.5 and Microsoft Macro Assembler 5.1. This package requires a joystick and EGA or VGA color graphics. An 80286, 386, or 486 processor machine is highly recommended. The standard distribution medium for MAT is a 5.25 inch 360K MS-DOS format diskette. The files are compressed using the PKZIP file compression utility. PKUNZIP is included on the distribution diskette. MAT was developed in 1992. IBM PC is a registered trademark of International Business Machines. MS-DOS, Microsoft QuickBasic, and Microsoft Macro Assembler are registered trademarks of Microsoft Corporation. PKZIP and PKUNZIP are registered trademarks of PKWare, Inc.

Usual Dietary Intakes: SAS Macros for Fitting Multivariate Measurement Error Models & Estimating Multivariate Usual Intake Distributions

Cancer.gov

The following SAS macros can be used to create a multivariate usual intake distribution for multiple dietary components that are consumed nearly every day or episodically. A SAS macro for performing balanced repeated replication (BRR) variance estimation is also included.

SPSS Macros for Assessing the Reliability and Agreement of Student Evaluations of Teaching

ERIC Educational Resources Information Center

Morley, Donald D.

2009-01-01

This article reports and demonstrates two SPSS macros for calculating Krippendorff's alpha and intraclass reliability coefficients in repetitive situations where numerous coefficients are needed. Specifically, the reported SPSS macros were used to evaluate the interrater agreement and reliability of student evaluations of teaching in thousands of…

On Language Management in Multinational Companies in the Czech Republic

ERIC Educational Resources Information Center

Nekvapil, Jiri; Nekula, Marek

2006-01-01

In this paper, we demonstrate the dialectical relationship between micro and macro language planning: macro planning influences micro planning and yet macro planning results (or should result) from micro planning. The relation between the two planning perspectives is illustrated within the framework of Language Management Theory (Jernudd &…

Why Macro Practice Matters

ERIC Educational Resources Information Center

Reisch, Michael

2016-01-01

This article asserts that macro practice is increasingly important in today's rapidly changing and complex practice environment. It briefly explores the history of macro practice in U.S. social work, summarizes its major contributions to the profession and to U.S. society, and provides some suggestions for how social work programs can expand…

A zwitterionic macro-crosslinker for durable non-fouling coatings.

PubMed

Wang, Wei; Lu, Yang; Xie, Jinbing; Zhu, Hui; Cao, Zhiqiang

2016-03-28

A novel zwitterionic macro-crosslinker was developed and applied to fabricate durable non-fouling coatings on a polyurethane substrate. The zwitterionic macro-crosslinker coating exhibited superior durability over the traditional brush polymer coating and was able to retain its non-fouling property even after weeks of shearing in flowing liquid.

Computer-Aided Modeling and Analysis of Power Processing Systems (CAMAPPS). Phase 1: Users handbook

NASA Technical Reports Server (NTRS)

Kim, S.; Lee, J.; Cho, B. H.; Lee, F. C.

1986-01-01

The EASY5 macro component models developed for the spacecraft power system simulation are described. A brief explanation about how to use the macro components with the EASY5 Standard Components to build a specific system is given through an example. The macro components are ordered according to the following functional group: converter power stage models, compensator models, current-feedback models, constant frequency control models, load models, solar array models, and shunt regulator models. Major equations, a circuit model, and a program listing are provided for each macro component.

Investigation on growth and macro-defects of Er3+-doped BaY2F8 laser crystal

NASA Astrophysics Data System (ADS)

Wang, Shuai; Ruan, Yongfeng; Tsuboi, Taiju; Zhang, Shouchao; Wang, Youfa; Tong, Hongshuang

2013-08-01

Large BaY2F8 and Er3+-doped BaY2F8 single crystals were grown by the temperature gradient method. Three kinds of macro-defects were found in BaY2F8 single crystals. These macro-defects include cracks, growth striations and straight pipes. The morphologies and distribution regularities of these macro-defects were observed and studied using a solid polarization microscope. The formation mechanisms and the methods of eliminating these defects were discussed.

At the intersection of micro and macro: opportunities and challenges for physician-patient communication research.

PubMed

Cline, Rebecca J Welch

2003-05-01

The health care relationship model is undergoing dramatic change. Micro-level communication patterns yield health care relationship models (e.g. paternalism, mutual participation, consumerism). At the same time, macro-level systems appear increasingly likely to influence the nature of micro-level interaction. The intersections of health care communication micro-level and macro-level phenomena provide important venues for research and interventions. This essay identifies theoretical premises regarding the relationships between communication and health-related behavior; explores three prominent and growing macro-level phenomena that observers argue likely influence the physical-patient relationship and communication therein: complementary and alternative medicine, the Internet, and direct-to-consumer advertising of prescription drugs; and offers a research agenda for exploring macro-level influences on micro-level physician-patient communication.

Electroanalytical sensing of chromium(III) and (VI) utilising gold screen printed macro electrodes.

PubMed

Metters, Jonathan P; Kadara, Rashid O; Banks, Craig E

2012-02-21

We report the fabrication of gold screen printed macro electrodes which are electrochemically characterised and contrasted to polycrystalline gold macroelectrodes with their potential analytical application towards the sensing of chromium(III) and (VI) critically explored. It is found that while these gold screen printed macro electrodes have electrode kinetics typically one order of magnitude lower than polycrystalline gold macroelectrodes as is measured via a standard redox probe, in terms of analytical sensing, these gold screen printed macro electrodes mimic polycrystalline gold in terms of their analytical performance towards the sensing of chromium(III) and (VI), whilst boasting additional advantages over the macro electrode due to their disposable one-shot nature and the ease of mass production. An additional advantage of these gold screen printed macro electrodes compared to polycrystalline gold is the alleviation of the requirement to potential cycle the latter to form the required gold oxide which aids in the simplification of the analytical protocol. We demonstrate that gold screen printed macro electrodes allow the low micro-molar sensing of chromium(VI) in aqueous solutions over the range 10 to 1600 μM with a limit of detection (3σ) of 4.4 μM. The feasibility of the analytical protocol is also tested through chromium(VI) detection in environmental samples.

ROOT — A C++ framework for petabyte data storage, statistical analysis and visualization

NASA Astrophysics Data System (ADS)

Antcheva, I.; Ballintijn, M.; Bellenot, B.; Biskup, M.; Brun, R.; Buncic, N.; Canal, Ph.; Casadei, D.; Couet, O.; Fine, V.; Franco, L.; Ganis, G.; Gheata, A.; Maline, D. Gonzalez; Goto, M.; Iwaszkiewicz, J.; Kreshuk, A.; Segura, D. Marcos; Maunder, R.; Moneta, L.; Naumann, A.; Offermann, E.; Onuchin, V.; Panacek, S.; Rademakers, F.; Russo, P.; Tadel, M.

2009-12-01

ROOT is an object-oriented C++ framework conceived in the high-energy physics (HEP) community, designed for storing and analyzing petabytes of data in an efficient way. Any instance of a C++ class can be stored into a ROOT file in a machine-independent compressed binary format. In ROOT the TTree object container is optimized for statistical data analysis over very large data sets by using vertical data storage techniques. These containers can span a large number of files on local disks, the web, or a number of different shared file systems. In order to analyze this data, the user can chose out of a wide set of mathematical and statistical functions, including linear algebra classes, numerical algorithms such as integration and minimization, and various methods for performing regression analysis (fitting). In particular, the RooFit package allows the user to perform complex data modeling and fitting while the RooStats library provides abstractions and implementations for advanced statistical tools. Multivariate classification methods based on machine learning techniques are available via the TMVA package. A central piece in these analysis tools are the histogram classes which provide binning of one- and multi-dimensional data. Results can be saved in high-quality graphical formats like Postscript and PDF or in bitmap formats like JPG or GIF. The result can also be stored into ROOT macros that allow a full recreation and rework of the graphics. Users typically create their analysis macros step by step, making use of the interactive C++ interpreter CINT, while running over small data samples. Once the development is finished, they can run these macros at full compiled speed over large data sets, using on-the-fly compilation, or by creating a stand-alone batch program. Finally, if processing farms are available, the user can reduce the execution time of intrinsically parallel tasks — e.g. data mining in HEP — by using PROOF, which will take care of optimally distributing the work over the available resources in a transparent way. Program summaryProgram title: ROOT Catalogue identifier: AEFA_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFA_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: LGPL No. of lines in distributed program, including test data, etc.: 3 044 581 No. of bytes in distributed program, including test data, etc.: 36 325 133 Distribution format: tar.gz Programming language: C++ Computer: Intel i386, Intel x86-64, Motorola PPC, Sun Sparc, HP PA-RISC Operating system: GNU/Linux, Windows XP/Vista, Mac OS X, FreeBSD, OpenBSD, Solaris, HP-UX, AIX Has the code been vectorized or parallelized?: Yes RAM:>55 Mbytes Classification: 4, 9, 11.9, 14 Nature of problem: Storage, analysis and visualization of scientific data Solution method: Object store, wide range of analysis algorithms and visualization methods Additional comments: For an up-to-date author list see: http://root.cern.ch/drupal/content/root-development-team and http://root.cern.ch/drupal/content/former-root-developers Running time: Depending on the data size and complexity of analysis algorithms References:http://root.cern.ch.

Regulation of neural macroRNAs by the transcriptional repressor REST

PubMed Central

Johnson, Rory; Teh, Christina Hui-Leng; Jia, Hui; Vanisri, Ravi Raj; Pandey, Tridansh; Lu, Zhong-Hao; Buckley, Noel J.; Stanton, Lawrence W.; Lipovich, Leonard

2009-01-01

The essential transcriptional repressor REST (repressor element 1-silencing transcription factor) plays central roles in development and human disease by regulating a large cohort of neural genes. These have conventionally fallen into the class of known, protein-coding genes; recently, however, several noncoding microRNA genes were identified as REST targets. Given the widespread transcription of messenger RNA-like, noncoding RNAs (“macroRNAs”), some of which are functional and implicated in disease in mammalian genomes, we sought to determine whether this class of noncoding RNAs can also be regulated by REST. By applying a new, unbiased target gene annotation pipeline to computationally discovered REST binding sites, we find that 23% of mammalian REST genomic binding sites are within 10 kb of a macroRNA gene. These putative target genes were overlooked by previous studies. Focusing on a set of 18 candidate macroRNA targets from mouse, we experimentally demonstrate that two are regulated by REST in neural stem cells. Flanking protein-coding genes are, at most, weakly repressed, suggesting specific targeting of the macroRNAs by REST. Similar to the majority of known REST target genes, both of these macroRNAs are induced during nervous system development and have neurally restricted expression profiles in adult mouse. We observe a similar phenomenon in human: the DiGeorge syndrome-associated noncoding RNA, DGCR5, is repressed by REST through a proximal upstream binding site. Therefore neural macroRNAs represent an additional component of the REST regulatory network. These macroRNAs are new candidates for understanding the role of REST in neuronal development, neurodegeneration, and cancer. PMID:19050060

Regulation of neural macroRNAs by the transcriptional repressor REST.

PubMed

Johnson, Rory; Teh, Christina Hui-Leng; Jia, Hui; Vanisri, Ravi Raj; Pandey, Tridansh; Lu, Zhong-Hao; Buckley, Noel J; Stanton, Lawrence W; Lipovich, Leonard

2009-01-01

The essential transcriptional repressor REST (repressor element 1-silencing transcription factor) plays central roles in development and human disease by regulating a large cohort of neural genes. These have conventionally fallen into the class of known, protein-coding genes; recently, however, several noncoding microRNA genes were identified as REST targets. Given the widespread transcription of messenger RNA-like, noncoding RNAs ("macroRNAs"), some of which are functional and implicated in disease in mammalian genomes, we sought to determine whether this class of noncoding RNAs can also be regulated by REST. By applying a new, unbiased target gene annotation pipeline to computationally discovered REST binding sites, we find that 23% of mammalian REST genomic binding sites are within 10 kb of a macroRNA gene. These putative target genes were overlooked by previous studies. Focusing on a set of 18 candidate macroRNA targets from mouse, we experimentally demonstrate that two are regulated by REST in neural stem cells. Flanking protein-coding genes are, at most, weakly repressed, suggesting specific targeting of the macroRNAs by REST. Similar to the majority of known REST target genes, both of these macroRNAs are induced during nervous system development and have neurally restricted expression profiles in adult mouse. We observe a similar phenomenon in human: the DiGeorge syndrome-associated noncoding RNA, DGCR5, is repressed by REST through a proximal upstream binding site. Therefore neural macroRNAs represent an additional component of the REST regulatory network. These macroRNAs are new candidates for understanding the role of REST in neuronal development, neurodegeneration, and cancer.

Systemic Integration and Macro Steering

ERIC Educational Resources Information Center

Bleiklie, Ivar

2007-01-01

The article deals with the development of national higher education systems and the emergence of macro steering in Europe and to some extent in the USA. It is based on the assumption that this process of integration of higher education systems through macro steering will increasingly be felt as a forceful influence on higher education. Integration…

Teaching Note--Incorporating Social Innovation Content into Macro Social Work Education

ERIC Educational Resources Information Center

Pitt-Catsouphes, Marcie; Cosner Berzin, Stephanie

2015-01-01

The practice of social innovation offers promising approaches for addressing social issues. Although many social innovation strategies are congruent with macro social work theory and practice, some of the insights and tactics that have emerged in the social innovation field have the potential to strengthen current macro practice. Based on our…

Micro-Macro Compatibility: When Does a Complex Systems Approach Strongly Benefit Science Learning?

ERIC Educational Resources Information Center

Samon, Sigal; Levy, Sharona T.

2017-01-01

The study explores how a complexity approach empowers science learning. A complexity approach represents systems as many interacting entities. The construct of micro-macro compatibility is introduced, the degree of similarity between behaviors at the micro- and macro-levels of the system. Seventh-grade students' learning about gases was studied…

Food/Hunger Macro-Analysis Seminar. A Do-It-Yourself Manual for College Courses and Action Groups.

ERIC Educational Resources Information Center

Moyer, William; Thorne, Erika

This guide describes a fifteen-week macro-analysis seminar about food production, distribution, and consumption on international, national, and local levels. The macro-analysis approach emphasizes the interrelatedness of all parts of the food/hunger issue; therefore the seminar also addresses escalating military expenditures, widening poverty, and…

Healthy public policy in poor countries: tackling macro-economic policies.

PubMed

Mohindra, K S

2007-06-01

Large segments of the population in poor countries continue to suffer from a high level of unmet health needs, requiring macro-level, broad-based interventions. Healthy public policy, a key health promotion strategy, aims to put health on the agenda of policy makers across sectors and levels of government. Macro-economic policy in developing countries has thus far not adequately captured the attention of health promotion researchers. This paper argues that healthy public policy should not only be an objective in rich countries, but also in poor countries. This paper takes up this issue by reviewing the main macro-economic aid programs offered by international financial institutions as a response to economic crises and unmanageable debt burdens. Although health promotion researchers were largely absent during a key debate on structural adjustment programs and health during the 1980s and 1990s, the international macro-economic policy tool currently in play offers a new opportunity to participate in assessing these policies, ensuring new forms of macro-economic policy interventions do not simply reproduce patterns of (neoliberal) economics-dominated development policy.

Development of Hollow Steel Ball Macro-Encapsulated PCM for Thermal Energy Storage Concrete

PubMed Central

Dong, Zhijun; Cui, Hongzhi; Tang, Waiching; Chen, Dazhu; Wen, Haibo

2016-01-01

The application of thermal energy storage with phase change materials (PCMs) for energy efficiency of buildings grew rapidly in the last few years. In this research, octadecane paraffin was served as a PCM, and a structural concrete with the function of indoor temperature control was developed by using a macro-encapsulated PCM hollow steel ball (HSB). The macro-encapsulated PCM-HSB was prepared by incorporation of octadecane into HSBs through vacuum impregnation. Test results showed that the maximum percentage of octadecane carried by HSBs was 80.3% by mass. The macro-encapsulated PCM-HSB has a latent heat storage capacity as high as 200.5 J/g. The compressive strength of concrete with macro-encapsulated PCM-HSB at 28 days ranged from 22 to 40 MPa. The indoor thermal performance test revealed that concrete with macro-encapsulated octadecane-HSB was capable of reducing the peak indoor air temperature and the fluctuation of indoor temperature. It can be very effective in transferring the heating and cooling loads away from the peak demand times. PMID:28787859

Development of Hollow Steel Ball Macro-Encapsulated PCM for Thermal Energy Storage Concrete.

PubMed

Dong, Zhijun; Cui, Hongzhi; Tang, Waiching; Chen, Dazhu; Wen, Haibo

2016-01-19

The application of thermal energy storage with phase change materials (PCMs) for energy efficiency of buildings grew rapidly in the last few years. In this research, octadecane paraffin was served as a PCM, and a structural concrete with the function of indoor temperature control was developed by using a macro-encapsulated PCM hollow steel ball (HSB). The macro-encapsulated PCM-HSB was prepared by incorporation of octadecane into HSBs through vacuum impregnation. Test results showed that the maximum percentage of octadecane carried by HSBs was 80.3% by mass. The macro-encapsulated PCM-HSB has a latent heat storage capacity as high as 200.5 J/g. The compressive strength of concrete with macro-encapsulated PCM-HSB at 28 days ranged from 22 to 40 MPa. The indoor thermal performance test revealed that concrete with macro-encapsulated octadecane-HSB was capable of reducing the peak indoor air temperature and the fluctuation of indoor temperature. It can be very effective in transferring the heating and cooling loads away from the peak demand times.

[Monitoring "green tide" in the Yellow Sea and the East China Sea using multi-temporal and multi-source remote sensing images].

PubMed

Xing, Qian-Guo; Zheng, Xiang-Yang; Shi, Ping; Hao, Jia-Jia; Yu, Ding-Feng; Liang, Shou-Zhen; Liu, Dong-Yan; Zhang, Yuan-Zhi

2011-06-01

Landsat-TM (Theme Mapper) and EOS (Earth Observing System)-MODIS (MODerate resolution Imaging Spectrora-diometer) Terra/Aqua images were used to monitor the macro-algae (Ulva prolifera) bloom since 2007 at the Yellow Sea and the East China Sea. At the turbid waters of Northern Jiangsu Shoal, there is strong spectral mixing behavior, and satellite images with finer spatical resolution are more effective in detection of macro-algae patches. Macro-algae patches were detected by the Landsat images for the first time at the Sheyang estuary where is dominated by very turbid waters. The MODIS images showed that the macro-algae from the turbid waters near the Northern Jiangsu Shoal drifted southwardly in the early of May and affected the East China Sea waters; with the strengthening east-asian Summer Monsoon, macro-algae patches mainly drifted in a northward path which was mostly observed at the Yellow Sea. Macro-algae patches were also found to drift eastwardly towards the Korea Peninsular, which are supposed to be driven by the sea surface wind.

Structural Characterization of the Histone Variant macroH2A

PubMed Central

Chakravarthy, Srinivas; Gundimella, Sampath Kumar Y.; Caron, Cecile; Perche, Pierre-Yves; Pehrson, John R.; Khochbin, Saadi; Luger, Karolin

2005-01-01

macroH2A is an H2A variant with a highly unusual structural organization. It has a C-terminal domain connected to the N-terminal histone domain by a linker. Crystallographic and biochemical studies show that changes in the L1 loop in the histone fold region of macroH2A impact the structure and potentially the function of nucleosomes. The 1.6-Å X-ray structure of the nonhistone region reveals an α/β fold which has previously been found in a functionally diverse group of proteins. This region associates with histone deacetylases and affects the acetylation status of nucleosomes containing macroH2A. Thus, the unusual domain structure of macroH2A integrates independent functions that are instrumental in establishing a structurally and functionally unique chromatin domain. PMID:16107708

Mentat: An object-oriented macro data flow system

NASA Technical Reports Server (NTRS)

Grimshaw, Andrew S.; Liu, Jane W. S.

1988-01-01

Mentat, an object-oriented macro data flow system designed to facilitate parallelism in distributed systems, is presented. The macro data flow model is a model of computation similar to the data flow model with two principal differences: the computational complexity of the actors is much greater than in traditional data flow systems, and there are persistent actors that maintain state information between executions. Mentat is a system that combines the object-oriented programming paradigm and the macro data flow model of computation. Mentat programs use a dynamic structure called a future list to represent the future of computations.

Interactions between macro-algal mats and invertebrates in the Ythan estuary, Aberdeenshire, Scotland

NASA Astrophysics Data System (ADS)

Raffaelli, D.

2000-07-01

Blooms of opportunistic green macro-algae are a common feature of coastal areas and their effects on mudflat invertebrates can be dramatic. On the Ythan estuary, Aberdeenshire, Scotland, we have carried out a number of manipulative field experiments designed to evaluate the effects on invertebrates of different species of macro-algae with contrasting ecologies, and the effects of invertebrates on the development of the blooms. Macro-algal mats were found to have dramatic nega- tive effects on the density of the amphipod Corophium volutator, with higher algal biomasses having greater impact. The mechanism for this interaction seems to be interference by the algal filaments with the feeding behaviour of the amphipod. In contrast, the polychaete Capitella spp. increases in abundance under macro-algal mats due to enrichment of the sediment with organic material. These two interactions are seen at all scales, in areas of less than 1 m2 to the scale of the entire estuary, irrespective of the species composition of the macro- algal mats. Bioturbation by Corophium and grazing by the snail Hydrobia ulvae had little effect on macro-algal biomass, but there were less algae when the polychaete Nereis diversicolor was present. The most significant interaction in this system is the pronounced negative impact of algal mats on the abundance of Corophium, probably the most important invertebrate species in the diets of the estuary's shorebirds, fish and epibenthic crustaceans.

Automating the Fireshed Assessment Process with ArcGIS

Treesearch

Alan Ager; Klaus Barber

2006-01-01

A library of macros was developed to automate the Fireshed process within ArcGIS. The macros link a number of vegetation simulation and wildfire behavior models (FVS, SVS, FARSITE, and FlamMap) with ESRI geodatabases, desktop software (Access, Excel), and ArcGIS. The macros provide for (1) an interactive linkage between digital imagery, vegetation data, FVS-FFE, and...

A Macro-Micro-Symbolic Teaching to Promote Relational Understanding of Chemical Reactions

ERIC Educational Resources Information Center

Jaber, Lama Ziad; Boujaoude, Saouma

2012-01-01

The purpose of this research is threefold: (1) to identify the difficulties that Grade 10 students in a Lebanese school have that hinder their conceptual understanding at the micro-macro-symbolic interface in chemistry, (2) to investigate the effect of a macro-micro-symbolic teaching approach on students' relational understanding of chemical…

Influence of Secondary Cooling Mode on Solidification Structure and Macro-segregation Behavior for High-carbon Continuous Casting Bloom

NASA Astrophysics Data System (ADS)

Dou, Kun; Yang, Zhenguo; Liu, Qing; Huang, Yunhua; Dong, Hongbiao

2017-07-01

A cellular automaton-finite element coupling model for high-carbon continuously cast bloom of GCr15 steel is established to simulate the solidification structure and to investigate the influence of different secondary cooling modes on characteristic parameters such as equiaxed crystal ratio, grain size and secondary dendrite arm spacing, in which the effect of phase transformation and electromagnetic stirring is taken into consideration. On this basis, evolution of carbon macro-segregation for GCr15 steel bloom is researched correspondingly via industrial tests. Based on above analysis, the relationship among secondary cooling modes, characteristic parameters for solidification structure as well as carbon macro-segregation is illustrated to obtain optimum secondary cooling strategy and alleviate carbon macro-segregation degree for GCr15 steel bloom in continuous casting process. The evaluating method for element macro-segregation is applicable in various steel types.

Analysis of the Transitioning Opportunity for Non-Traditional Firms Under Other Transaction Authority

DTIC Science & Technology

2008-06-01

PESTEL Analysis PESTEL Analysis examines the general environment surrounding the defense industry in a macro perspective. Its focus is on six main...legislation (p. 575). C. STRATEGIC ANALYSIS OF THE MACRO ENVIRONMENT 1. Porter’s Five-Forces Model Analysis Porter’s Five-Forces Model is used to analyze...B. PREVIOUS ANALYSES.................................................................................9 C. STRATEGIC ANALYSIS OF THE MACRO

A Force-Controllable Macro-Micro Manipulator and its Application to Medical Robotics

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.; Uecker, Darrin R.; Wang, Yulun

1993-01-01

This paper describes an 8-degrees-of-freedom macro-micro robot. This robot is capable of performing tasks that require accurate force control, such as polishing, finishing, grinding, deburring, and cleaning. The design of the macro-micro mechanism, the control algorithms, and the hardware/sofware implemtation of the algotithms are described in this paper. Initial experimental results are reported.

Inequality in Participation in Adult Learning and Education (ALE): Effects of Micro- and Macro-Level Factors through a Comparative Study

ERIC Educational Resources Information Center

Lee, Jeongwoo

2017-01-01

The objectives of this dissertation include describing and analyzing the patterns of inequality in ALE participation at both the micro and macro levels. Special attention is paid to social origins of individual adults and their association with two groups of macro-level factors, social inequality (income, education, and skill inequality) and…

Why Are Macros Not Used? A Brief Review and an Approach for Improving Training

ERIC Educational Resources Information Center

Yechiam, Eldad

2006-01-01

Macros are programming scripts that can be generated by recording users' actions. It appears that despite their potential for reducing monotonous work, they are under-used by non-programmers. The present paper reviews the literature on the use of macros. Included is an original study that examines the effect of adding the "search and replace"…

The Micro and Macro Analysis of English and Arabic Religious Texts

ERIC Educational Resources Information Center

Al-Araji, Baida Faisal; Al-Azzawi, Sarab Khalil

2016-01-01

Religious discourse has been treated differently in various types of studies. In the present study, the English Biblical and Arabic Prophetic Hadiths will be tackled on two bases namely the micro and macro levels. In other words, the data will be analyzed at both micro and macro levels to maintain the organizational status of the religious texts.…

Modeling air concentration over macro roughness conditions by Artificial Intelligence techniques

NASA Astrophysics Data System (ADS)

Roshni, T.; Pagliara, S.

2018-05-01

Aeration is improved in rivers by the turbulence created in the flow over macro and intermediate roughness conditions. Macro and intermediate roughness flow conditions are generated by flows over block ramps or rock chutes. The measurements are taken in uniform flow region. Efficacy of soft computing methods in modeling hydraulic parameters are not common so far. In this study, modeling efficiencies of MPMR model and FFNN model are found for estimating the air concentration over block ramps under macro roughness conditions. The experimental data are used for training and testing phases. Potential capability of MPMR and FFNN model in estimating air concentration are proved through this study.

Managing protected health information in distributed research network environments: automated review to facilitate collaboration.

PubMed

Bredfeldt, Christine E; Butani, Amy; Padmanabhan, Sandhyasree; Hitz, Paul; Pardee, Roy

2013-03-22

Multi-site health sciences research is becoming more common, as it enables investigation of rare outcomes and diseases and new healthcare innovations. Multi-site research usually involves the transfer of large amounts of research data between collaborators, which increases the potential for accidental disclosures of protected health information (PHI). Standard protocols for preventing release of PHI are extremely vulnerable to human error, particularly when the shared data sets are large. To address this problem, we developed an automated program (SAS macro) to identify possible PHI in research data before it is transferred between research sites. The macro reviews all data in a designated directory to identify suspicious variable names and data patterns. The macro looks for variables that may contain personal identifiers such as medical record numbers and social security numbers. In addition, the macro identifies dates and numbers that may identify people who belong to small groups, who may be identifiable even in the absences of traditional identifiers. Evaluation of the macro on 100 sample research data sets indicated a recall of 0.98 and precision of 0.81. When implemented consistently, the macro has the potential to streamline the PHI review process and significantly reduce accidental PHI disclosures.

Optimization of healthcare supply chain in context of macro-ergonomics factors by a unique mathematical programming approach.

PubMed

Azadeh, A; Motevali Haghighi, S; Gaeini, Z; Shabanpour, N

2016-07-01

This study presents an integrated approach for analyzing the impact of macro-ergonomics factors in healthcare supply chain (HCSC) by data envelopment analysis (DEA). The case of this study is the supply chain (SC) of a real hospital. Thus, healthcare standards and macro-ergonomics factors are considered to be modeled by the mathematical programming approach. Over 28 subsidiary SC divisions with parallel missions and objectives are evaluated by analyzing inputs and outputs through DEA. Each division in this HCSC is considered as decision making unit (DMU). This approach can analyze the impact of macro-ergonomics factors on supply chain management (SCM) in healthcare sector. Also, this method ranks the relevant performance efficiencies of each HCSC. In this study by using proposed method, the most effective macro-ergonomics factor on HCSC is identified as "teamwork" issue. Also, this study would help managers to identify the areas of weaknesses in their SCM system and set improvement target plan for the related SCM system in healthcare industry. To the best of our knowledge, this is the first study for macro-ergonomics optimization of HCSC. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Research on Mechanisms and Controlling Methods of Macro Defects in TC4 Alloy Fabricated by Wire Additive Manufacturing.

PubMed

Ji, Lei; Lu, Jiping; Tang, Shuiyuan; Wu, Qianru; Wang, Jiachen; Ma, Shuyuan; Fan, Hongli; Liu, Changmeng

2018-06-28

Wire feeding additive manufacturing (WFAM) has broad application prospects because of its advantages of low cost and high efficiency. However, with the mode of lateral wire feeding, including wire and laser additive manufacturing, gas tungsten arc additive manufacturing etc., it is easy to generate macro defects on the surface of the components because of the anisotropy of melted wire, which limits the promotion and application of WFAM. In this work, gas tungsten arc additive manufacturing with lateral wire feeding is proposed to investigate the mechanisms of macro defects. The results illustrate that the defect forms mainly include side spatters, collapse, poor flatness, and unmelted wire. It was found that the heat input, layer thickness, tool path, and wire curvature can have an impact on the macro defects. Side spatters are the most serious defects, mainly because the droplets cannot be transferred to the center of the molten pool in the lateral wire feeding mode. This research indicates that the macro defects can be controlled by optimizing the process parameters. Finally, block parts without macro defects were fabricated, which is meaningful for the further application of WFAM.

Micro and Macro Segregation in Alloys Solidifying with Equiaxed Morphology

NASA Technical Reports Server (NTRS)

Stefanescu, Doru M.; Curreri, Peter A.; Leon-Torres, Jose; Sen, Subhayu

1996-01-01

To understand macro segregation formation in Al-Cu alloys, experiments were run under terrestrial gravity (1g) and under low gravity during parabolic flights (10(exp -2) g). Alloys of two different compositions (2% and 5% Cu) were solidified at two different cooling rates. Systematic microscopic and SEM observations produced microstructural and segregation maps for all samples. These maps may be used as benchmark experiments for validation of microstructure evolution and segregation models. As expected, the macro segregation maps are very complex. When segregation was measured along the central axis of the sample, the highest macro segregation for samples solidified at 1g was obtained for the lowest cooling rate. This behavior is attributed to the longer time available for natural convection and shrinkage flow to affect solute redistribution. In samples solidified under low-g, the highest macro-segregation was obtained at the highest cooling rate. In general, low-gravity solidification resulted in less segregation. To explain the experimental findings, an analytical (Flemings-Nereo) and a numerical model were used. For the numerical model, the continuum formulation was employed to describe the macroscopic transports of mass, energy, and momentum, associated with the microscopic transport phenomena, for a two-phase system. The model proposed considers that liquid flow is driven by thermal and solutal buoyancy, and by solidification shrinkage. The Flemings-Nereo model explains well macro segregation in the initial stages of low-gravity segregation. The numerical model can describe the complex macro segregation pattern and the differences between low- and high-gravity solidification.

Multidisciplinary acute care research organization (MACRO): if you build it, they will come.

PubMed

Early, Barbara J; Huang, David T; Callaway, Clifton W; Zenati, Mazen; Angus, Derek C; Gunn, Scott R; Yealy, Donald M; Unikel, Daniel; Billiar, Timothy R; Peitzman, Andrew B; Sperry, Jason L

2013-07-01

Clinical research will increasingly play a core role in the evolution and growth of acute care surgery program development across the country. What constitutes an efficient and effective clinical research infrastructure in the current fiscal and academic environment remains obscure. We sought to characterize the effects of implementation of a multidisciplinary acute care research organization (MACRO) at a busy tertiary referral university setting. In 2008, to minimize redundancy and cost as well as to maximize existing resources promoting acute care research, MACRO was created, unifying clinical research infrastructure among the Departments of Critical Care Medicine, Emergency Medicine, and Surgery. During the periods 2008 to 2012, we performed a retrospective analysis and determined volume of clinical studies, patient enrollment for both observational and interventional trials, and staff growth since MACRO's origination and characterized changes over time. From 2008 to 2011, the volume of patients enrolled in clinical studies, which MACRO facilitates has significantly increased more than 300%. The percentage of interventional/observational trials has remained stable during the same period (50-60%). Staff has increased from 6 coordinators to 10, with an additional 15 research associates allowing 24/7 service. With this significant growth, MACRO has become financially self-sufficient, and additional outside departments now seek MACRO's services. Appropriate organization of acute care clinical research infrastructure minimizes redundancy and can promote sustainable, efficient growth in the current academic environment. Further studies are required to determine if similar models can be successful at other acute care surgery programs.

Method of Fabricating NASA-Standard Macro-Fiber Composite Piezoelectric Actuators

NASA Technical Reports Server (NTRS)

High, James W.; Wilkie, W. Keats

2003-01-01

The NASA Macro-Fiber Composite actuator is a flexible piezoelectric composite device designed for controlling vibrations and shape deformations in high performance aerospace structures. A complete method for fabricating the standard NASA Macro-Fiber Composite actuator is presented in this document. When followed precisely, these procedures will yield devices with electromechanical properties identical to the standard actuator manufactured by NASA Langley Research Center.

Limited protection of macro-aggregate-occluded organic carbon in Siberian steppe soils

NASA Astrophysics Data System (ADS)

Bischoff, Norbert; Mikutta, Robert; Shibistova, Olga; Puzanov, Alexander; Silanteva, Marina; Grebennikova, Anna; Fuß, Roland; Guggenberger, Georg

2017-05-01

Macro-aggregates especially in agricultural steppe soils are supposed to play a vital role for soil organic carbon (OC) stabilization at a decadal timescale. While most research on soil OC stabilization in steppes focused on North American prairie soils of the Great Plains with information mainly provided by short-term incubation experiments, little is known about the agricultural steppes in southwestern Siberia, though they belong to the greatest conversion areas in the world and occupy an area larger than that in the Great Plains. To quantify the proportion of macro-aggregate-protected OC under different land use as function of land use intensity and time since land use change (LUC) from pasture to arable land in Siberian steppe soils, we determined OC mineralization rates of intact (250-2000 µm) and crushed (< 250 µm) macro-aggregates in long-term incubations over 401 days (20 °C; 60 % water holding capacity) along two agricultural chronosequences in the Siberian Kulunda steppe. Additionally, we incubated bulk soil (< 2000 µm) to determine the effect of LUC and subsequent agricultural use on a fast and a slow soil OC pool (labile vs. more stable OC), as derived from fitting exponential-decay models to incubation data. We hypothesized that (i) macro-aggregate crushing leads to increased OC mineralization due to an increasing microbial accessibility of a previously occluded labile macro-aggregate OC fraction, and (ii) bulk soil OC mineralization rates and the size of the fast OC pool are higher in pasture than in arable soils with decreasing bulk soil OC mineralization rates and size of the fast OC pool as land use intensity and time since LUC increase. Against our hypothesis, OC mineralization rates of crushed macro-aggregates were similar to those of intact macro-aggregates under all land use regimes. Macro-aggregate-protected OC was almost absent and accounted for < 1 % of the total macro-aggregate OC content and to a maximum of 8 ± 4 % of mineralized OC. In accordance to our second hypothesis, highest bulk soil OC mineralization rates and sizes of the fast OC pool were determined under pasture, but mineralization rates and pool sizes were unaffected by land use intensity and time since LUC. However, at one chronosequence mean residence times of the fast and slow OC pool tended to decrease with increasing time since establishment of arable use. We conclude that the tillage-induced breakdown of macro-aggregates has not reduced the OC contents in the soils under study. The decline of OC after LUC is probably attributed to the faster soil OC turnover under arable land as compared to pasture at a reduced plant residue input.

Investigation on the Residual Stress State of Drawn Tubes by Numerical Simulation and Neutron Diffraction Analysis

PubMed Central

Palkowski, Heinz; Brück, Sebastian; Pirling, Thilo; Carradò, Adele

2013-01-01

Cold drawing is widely applied in the industrial production of seamless tubes, employed for various mechanical applications. During pre-processing, deviations in tools and their adjustment lead to inhomogeneities in the geometry of the tubes and cause a gradient in residuals. In this paper a three dimensional finite element (3D-FE)-model is presented which was developed to calculate the change in wall thickness, eccentricity, ovality and residual macro-stress state of the tubes, produced by cold drawing. The model simulates the drawing process of tubes, drawn with and without a plug. For finite element modelling, the commercial software package Abaqus was used. To validate the model, neutron strain imaging measurements were performed on the strain imaging instrument SALSA at the Institute Laue Langevin (ILL, Grenoble, France) on a series of SF-copper tubes, drawn under controlled laboratory conditions, varying the drawing angle and the plug geometry. It can be stated that there is sufficient agreement between the finite element method (FEM)-calculation and the neutron stress determination. PMID:28788380

Testing the QGSJET01 and QGSJETII-04 models with the help of atmospheric muons

NASA Astrophysics Data System (ADS)

Dedenko, Leonid G.; Lukyashin, Anton V.; Roganova, Tatiana M.; Fedorova, Galina F.

2017-06-01

More accurate original calculations of the atmospheric vertical muon energy spectra at energies 102 - 105 GeV have been carried out in terms of the QGSJET01 and QGSJETII-04 models. The Gaisser-Honda approximations of the measured energy spectra of primary protons, helium and nitrogen nuclei have been used. The CORSIKA package has been used to simulate cascades in the standard atmosphere induced by different primary particles with various fixed energies E. Statistics of simulated cascades for secondary particles with energies (0.01 - 1) · E was increased up to 106. It has been shown that predictions of the QGSJET01 and QGSJETII-04 models for these muon fluxes are below the data of the classical experiments L3 + Cosmic, MACRO and LVD by factors of ˜ 1.7-2 at energies above 102 GeV. It has been concluded that these tested models underestimate the production of the most energetic secondary particles, namely, π-mesons and K-mesons, in interactions of primary protons and other primary nuclei with nuclei in the atmosphere by the same factors.

Testing of the DPMJET and VENUS hadronic interaction models with help of the atmospheric muons

NASA Astrophysics Data System (ADS)

Dedenko, L. G.; Lukyashin, A. V.; Roganova, T. M.; Fedorova, G. F.

2017-01-01

The more accurate original calculations of the atmospheric vertical muon energy spectra at energies 102 - 105 GeV have been carried out in terms of DPMJET and VENUS models. The Gaisser-Honda approximations of the measured energy spectra of primary protons, helium and nitrogen nuclei have been used. The package CORSIKA has been used to simulate cascades in the standard atmosphere induced by different primary particles with various fixed energies E. Statistics of simulated cascades for secondary particles with energies (0.01-1)·E was increased up to 106. It has been shown that predictions of the DPMJET and VENUS models for these muon fluxes are below the data of the classical experiments L3 + Cosmic, MACRO and LVD by factors of ˜ 1.6-1.95 at energies above 102 GeV. It has been concluded that these tested models underestimate the production of the most energetic secondary particles, namely, π-mesons and K-mesons, in interactions of the primary protons and other primary nuclei with nuclei in the atmosphere by the same factors.

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis.

PubMed

Neyeloff, Jeruza L; Fuchs, Sandra C; Moreira, Leila B

2012-01-20

Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software.

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis

PubMed Central

2012-01-01

Background Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. Findings We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. Conclusions It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software. PMID:22264277

Finite Macro-Element Mesh Deformation in a Structured Multi-Block Navier-Stokes Code

NASA Technical Reports Server (NTRS)

Bartels, Robert E.

2005-01-01

A mesh deformation scheme is developed for a structured multi-block Navier-Stokes code consisting of two steps. The first step is a finite element solution of either user defined or automatically generated macro-elements. Macro-elements are hexagonal finite elements created from a subset of points from the full mesh. When assembled, the finite element system spans the complete flow domain. Macro-element moduli vary according to the distance to the nearest surface, resulting in extremely stiff elements near a moving surface and very pliable elements away from boundaries. Solution of the finite element system for the imposed boundary deflections generally produces smoothly varying nodal deflections. The manner in which distance to the nearest surface has been found to critically influence the quality of the element deformation. The second step is a transfinite interpolation which distributes the macro-element nodal deflections to the remaining fluid mesh points. The scheme is demonstrated for several two-dimensional applications.

Time to death and the forecasting of macro-level health care expenditures: some further considerations.

PubMed

van Baal, Pieter H; Wong, Albert

2012-12-01

Although the effect of time to death (TTD) on health care expenditures (HCE) has been investigated using individual level data, the most profound implications of TTD have been for the forecasting of macro-level HCE. Here we estimate the TTD model using macro-level data from the Netherlands consisting of mortality rates and age- and gender-specific per capita health expenditures for the years 1981-2007. Forecasts for the years 2008-2020 of this macro-level TTD model were compared to forecasts that excluded TTD. Results revealed that the effect of TTD on HCE in our macro model was similar to those found in micro-econometric studies. As the inclusion of TTD pushed growth rate estimates from unidentified causes upwards, however, the two models' forecasts of HCE for the 2008-2020 were similar. We argue that including TTD, if modeled correctly, does not lower forecasts of HCE. Copyright © 2012 Elsevier B.V. All rights reserved.

Are biotic indices sensitive to river toxicants? A comparison of metrics based on diatoms and macro-invertebrates.

PubMed

Blanco, S; Bécares, E

2010-03-01

Biotic indices based on macro-invertebrates and diatoms are frequently used to diagnose ecological quality in watercourses, but few published works have assessed their effectiveness as biomonitors of the concentration of micropollutants. A biological survey performed at 188 sites in the basin of the River Duero in north-western Spain. Nineteen diatom and six macro-invertebrate indices were calculated and compared with the concentrations of 37 different toxicants by means of a correlation analysis. Several chemical variables analysed correlated significantly with at least one biotic index. Sládecek's diatom index and the number of macro-invertebrate families exhibited particularly high correlation coefficients. Methods based on macro-invertebrates performed better in detecting biocides, while diatom indices showed stronger correlations with potentially toxic elements such as heavy metals. All biotic indices, and particularly diatom indices, were especially sensitive to the concentration of fats and oils and trichloroethene. Copyright 2010 Elsevier Ltd. All rights reserved.

Macro-Level Approaches to HIV Prevention Among Ethnic Minority Youth

PubMed Central

Prado, Guillermo; Lightfoot, Marguerita; Brown, C. Hendricks

2013-01-01

The HIV epidemic continues to disproportionately affect ethnic minority youth. These disconcerting health disparities indicate that although existing HIV preventive strategies for ethnic minority youth have been efficacious, they have not significantly reduced the impact of the epidemic in this population. Macro-level interventions, such as structural or policy interventions, have the potential to impact the HIV epidemic at a population level, and thus reduce the HIV health disparities that exist among ethnic minority youth and other segments of the U.S. population. This article calls for a paradigm shift to develop, evaluate, and disseminate interventions that target upstream/macro-level factors or that, at a minimum, integrate both a macro and individual level perspective. The article also discusses the challenges in developing and evaluating such interventions. Psychologists and other behavioral scientists can play a critical role in reducing the impact of HIV on ethnic minority youth by integrating macro-level approaches to future HIV prevention strategies. PMID:23688095

Intelligent Learning System using cognitive science theory and artificial intelligence methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cristensen, D.L.

1986-01-01

This dissertation is a presentation of a theoretical model of an intelligent Learning System (ILS). The approach view intelligent computer-based instruction on a curricular-level and educational-theory base, instead of the conventional instructional-only level. The ILS is divided into two components: (1) macro-level, curricular; and (2) micro-level (MAIS), instructional. The primary purpose of the ILS macro level is to establish the initial conditions of learning by considering individual difference variables within specification of the curriculum content domain. Second, the ILS macro-level will iteratively update the conditions of learning as the individual student progresses through the given curriculum. The term dynamic ismore » used to describe the expert tutor that establishes and monitors the conditions of instruction between the ILS macro level and the micro level. As the student progresses through the instruction, appropriate information is sent back continuously to the macro level to constantly improve decision making for succeeding conditions of instruction.« less

Sustaining anti-littering behavior within coastal and marine environments: Through the macro-micro level lenses.

PubMed

Beeharry, Yashna Devi; Bekaroo, Girish; Bokhoree, Chandradeo; Phillips, Michael Robert; Jory, Neelakshi

2017-06-30

Being regarded as a problem of global dimensions, marine litter has been a growing concern that affects human beings, wildlife and the economic health of coastal communities to varying degrees. Due to its involvement with human behavior, marine littering has been regarded as a cultural matter encompassing macro and micro level aspects. At the micro or individual level, behavior and behavioral motivation of an individual are driven by perception of that person while at the macro or societal level, aspects including policies and legislations influence behavior. This paper investigates marine littering through the macro-micro level lenses in order to analyze and recommend how anti-littering behavior can be improved and sustained. Using Coleman's model of micro-macro relations, research questions are formulated and investigated through a social survey. Results showed important differences in perceptions among participating groups and to address key issues, potential actions are proposed along with a framework to sustain anti-littering behavior. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of changes in micro- and macro-environmental factors on the supply of hospitals services.

PubMed

Kassaye, W W; Tseng, K C

1990-01-01

The failures, marketing difficulties and financial hardships hospitals have experienced raises a question as to whether they have been responsive to the changes in the micro and macro-environmental factors. To determine how responsive hospitals have been to these changes, we investigate the impact of a number of selected factors on the supply of hospital services during 1972 through 1978. The findings indicate that despite the fact that the economy went through recessionary periods, and the demographic distribution exhibited both a shift and a change in the aging and birth rates of the nation, the changes in hospitals' responsiveness have been less than satisfactory. It appears that hospitals readily respond to the changes in the micro-environment than to the changes in macro-environment. Their response to the changes in the macro-environment. Their response to the changes in the macro-environment may be characterized as an effort to create a higher level of production whose goal is to create a still higher level of needs and wants.

The Development of Louis MACRO (Mother and Child Risk Observation) Forms: Assessing Parent-Infant-Child Risk in the Presence of Maternal Mental Illness.

ERIC Educational Resources Information Center

Louis, Andrea; And Others

1997-01-01

An Australian study of 110 mother-infant dyads and 85 mother-toddler dyads in which the mothers were mentally ill evaluated the effectiveness of the Mother and Child Risk Observation (MACRO). Results found that MACRO offers a convenient framework for assessing risk and interpreting the impact of maternal mental illness upon children. (Author/CR)

[A global view of population health in Colombia: role of social macro-determinants].

PubMed

Idrovo, Alvaro J; Ruiz-Rodríguez, Myriam

2007-09-01

The social environment is an important determinant of population and individual health. However, its impact is often not considered in national health policies and generally its attributes are considered as constants. For this reason, contemporary health policies place greater emphasis on individual risk factors. Colombias position in the world ranking is described with respect to several social macro-determinants of health, previously characterized as components of class/welfare regime model. The exploratory study included all countries with comparable data including the following: (1) economic development [gross domestic product per capita adjusted for purchasing power parity], (2) income inequality [Gini coefficient], (3) social capital corruption perceptions index and generalized trust, and (4) political regime index of freedom. First, correlations between these macro-determinants were estimated, and second, the relationship between them and life expectancy at birth was explored. Finally, the position of Colombia in global context was determined. Important correlations occurred among the macro-determinants. Colombia tended to have intermediate to low positions in the global context in all macro-determinants, with the exception of gross domestic product per capita adjusted for purchasing power parity. The macro-determinant of population health with the highest potential of effecting improvement in health conditions is to modify income inequality.

Macro- and micro-level predictors of age categorization: results from the European Social Survey.

PubMed

Ayalon, Liat; Doron, Israel; Bodner, Ehud; Inbar, Noit

2014-03-01

This study evaluated macro- and micro-level variables associated with individuals' perception of the ending of youth, the beginning of old age, and the length of the middle age period. The European Social Survey is a biennial multi-country, cross-sectional survey. Our analysis is based on the fourth wave, which included a rotating module on ageism. The source sample consisted of 28 countries and a total of 54,988 respondents. Whereas macro-level variability accounted for 14 % of the variance associated with the perception of the ending of youth, only 5.7 % of the variance associated with the perception of the beginning of old age was accounted for by macro-level variability. Almost 10 % of the variance associated with the perception of the middle age period was associated with macro-level variability. Different patterns of macro- and micro-level correlates emerged for the ending of youth, beginning of old age, and the period of middle age. Overall, results demonstrate that individual differences in the perception of the ending of youth, the beginning of old age, and the length of the middle age period are more pronounced than contextual differences. Results also suggest that individuals' mental maps regarding the timing of these events are not necessarily concordant.

Managing protected health information in distributed research network environments: automated review to facilitate collaboration

PubMed Central

2013-01-01

Background Multi-site health sciences research is becoming more common, as it enables investigation of rare outcomes and diseases and new healthcare innovations. Multi-site research usually involves the transfer of large amounts of research data between collaborators, which increases the potential for accidental disclosures of protected health information (PHI). Standard protocols for preventing release of PHI are extremely vulnerable to human error, particularly when the shared data sets are large. Methods To address this problem, we developed an automated program (SAS macro) to identify possible PHI in research data before it is transferred between research sites. The macro reviews all data in a designated directory to identify suspicious variable names and data patterns. The macro looks for variables that may contain personal identifiers such as medical record numbers and social security numbers. In addition, the macro identifies dates and numbers that may identify people who belong to small groups, who may be identifiable even in the absences of traditional identifiers. Results Evaluation of the macro on 100 sample research data sets indicated a recall of 0.98 and precision of 0.81. Conclusions When implemented consistently, the macro has the potential to streamline the PHI review process and significantly reduce accidental PHI disclosures. PMID:23521861

Bridging the Gap Between Micro and Macro Practice to Address Homelessness in the U.S.-Mexico Border Region: Implications for Practitioners and Community Stakeholders

PubMed Central

Moya, Eva M.; Chavez-Baray, Silvia Maria; Martinez, Omar; Mattera, Brian; Adcox, Courtney

2018-01-01

Research and scholarship efforts continue to promote the integration of micro and macro practice in social work practice and education. Despite this, scholarship has documented persistent challenges in the fluid integration between the domains of micro-level service provision and macro-level social change efforts in practice and academic programs. This paper outlines a successful bridge between the micro-macro divide in the form of community-engaged practice to address homelessness and social work education in the U.S.-Mexico border region. MSW students enrolled in a macro-level course at the University of Texas at El Paso’s College of Health Sciences successfully partnered with the Opportunity Center for the Homeless, a grassroots community-based organization serving individuals experiencing homelessness. The narrative describes how students were effectively able to apply both micro- and macro-level skills learned in the classroom to an experiential learning environment while providing much-needed assistance to an underfunded community-based organization. A set of challenges and recommendations are also discussed. Research initiatives are needed to evaluate and test clinical and community work initiatives, including the use of photovoice methodology to address homelessness, while being responsive to community needs and challenges. PMID:29809204

Efficient radiologic reading environment by using an open-source macro program as connection software.

PubMed

Lee, Young Han

2012-01-01

The objectives are (1) to introduce an easy open-source macro program as connection software and (2) to illustrate the practical usages in radiologic reading environment by simulating the radiologic reading process. The simulation is a set of radiologic reading process to do a practical task in the radiologic reading room. The principal processes are: (1) to view radiologic images on the Picture Archiving and Communicating System (PACS), (2) to connect the HIS/EMR (Hospital Information System/Electronic Medical Record) system, (3) to make an automatic radiologic reporting system, and (4) to record and recall information of interesting cases. This simulation environment was designed by using open-source macro program as connection software. The simulation performed well on the Window-based PACS workstation. Radiologists practiced the steps of the simulation comfortably by utilizing the macro-powered radiologic environment. This macro program could automate several manual cumbersome steps in the radiologic reading process. This program successfully acts as connection software for the PACS software, EMR/HIS, spreadsheet, and other various input devices in the radiologic reading environment. A user-friendly efficient radiologic reading environment could be established by utilizing open-source macro program as connection software. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Bridging the Gap Between Micro and Macro Practice to Address Homelessness in the U.S.-Mexico Border Region: Implications for Practitioners and Community Stakeholders.

PubMed

Moya, Eva M; Chavez-Baray, Silvia Maria; Martinez, Omar; Mattera, Brian; Adcox, Courtney

2018-01-01

Research and scholarship efforts continue to promote the integration of micro and macro practice in social work practice and education. Despite this, scholarship has documented persistent challenges in the fluid integration between the domains of micro-level service provision and macro-level social change efforts in practice and academic programs. This paper outlines a successful bridge between the micro-macro divide in the form of community-engaged practice to address homelessness and social work education in the U.S.-Mexico border region. MSW students enrolled in a macro-level course at the University of Texas at El Paso's College of Health Sciences successfully partnered with the Opportunity Center for the Homeless, a grassroots community-based organization serving individuals experiencing homelessness. The narrative describes how students were effectively able to apply both micro- and macro-level skills learned in the classroom to an experiential learning environment while providing much-needed assistance to an underfunded community-based organization. A set of challenges and recommendations are also discussed. Research initiatives are needed to evaluate and test clinical and community work initiatives, including the use of photovoice methodology to address homelessness, while being responsive to community needs and challenges.

Plant litter functional diversity effects on litter mass loss depend on the macro-detritivore community.

PubMed

Patoine, Guillaume; Thakur, Madhav P; Friese, Julia; Nock, Charles; Hönig, Lydia; Haase, Josephine; Scherer-Lorenzen, Michael; Eisenhauer, Nico

2017-11-01

A better understanding of the mechanisms driving litter diversity effects on decomposition is needed to predict how biodiversity losses affect this crucial ecosystem process. In a microcosm study, we investigated the effects of litter functional diversity and two major groups of soil macro-detritivores on the mass loss of tree leaf litter mixtures. Furthermore, we tested the effects of litter trait community means and dissimilarity on litter mass loss for seven traits relevant to decomposition. We expected macro-detritivore effects on litter mass loss to be most pronounced in litter mixtures of high functional diversity. We used 24 leaf mixtures differing in functional diversity, which were composed of litter from four species from a pool of 16 common European tree species. Earthworms, isopods, or a combination of both were added to each litter combination for two months. Litter mass loss was significantly higher in the presence of earthworms than in that of isopods, whereas no synergistic effects of macro-detritivore mixtures were found. The effect of functional diversity of the litter material was highest in the presence of both macro-detritivore groups, supporting the notion that litter diversity effects are most pronounced in the presence of different detritivore species. Species-specific litter mass loss was explained by nutrient content, secondary compound concentration, and structural components. Moreover, dissimilarity in N concentrations increased litter mass loss, probably because detritivores having access to nutritionally diverse food sources. Furthermore, strong competition between the two macro-detritivores for soil surface litter resulted in a decrease of survival of both macro-detritivores. These results show that the effects of litter functional diversity on decomposition are contingent upon the macro-detritivore community and composition. We conclude that the temporal dynamics of litter trait diversity effects and their interaction with detritivore diversity are key to advancing our understanding of litter mass loss in nature.

Plant litter functional diversity effects on litter mass loss depend on the macro-detritivore community

PubMed Central

Patoine, Guillaume; Thakur, Madhav P.; Friese, Julia; Nock, Charles; Hönig, Lydia; Haase, Josephine; Scherer-Lorenzen, Michael; Eisenhauer, Nico

2017-01-01

A better understanding of the mechanisms driving litter diversity effects on decomposition is needed to predict how biodiversity losses affect this crucial ecosystem process. In a microcosm study, we investigated the effects of litter functional diversity and two major groups of soil macro-detritivores on the mass loss of tree leaf litter mixtures. Furthermore, we tested the effects of litter trait community means and dissimilarity on litter mass loss for seven traits relevant to decomposition. We expected macro-detritivore effects on litter mass loss to be most pronounced in litter mixtures of high functional diversity. We used 24 leaf mixtures differing in functional diversity, which were composed of litter from four species from a pool of 16 common European tree species. Earthworms, isopods, or a combination of both were added to each litter combination for two months. Litter mass loss was significantly higher in the presence of earthworms than in that of isopods, whereas no synergistic effects of macro-detritivore mixtures were found. The effect of functional diversity of the litter material was highest in the presence of both macro-detritivore groups, supporting the notion that litter diversity effects are most pronounced in the presence of different detritivore species. Species-specific litter mass loss was explained by nutrient content, secondary compound concentration, and structural components. Moreover, dissimilarity in N concentrations increased litter mass loss, probably because detritivores having access to nutritionally diverse food sources. Furthermore, strong competition between the two macro-detritivores for soil surface litter resulted in a decrease of survival of both macro-detritivores. These results show that the effects of litter functional diversity on decomposition are contingent upon the macro-detritivore community and composition. We conclude that the temporal dynamics of litter trait diversity effects and their interaction with detritivore diversity are key to advancing our understanding of litter mass loss in nature. PMID:29180828

A structuration framework for bridging the macro-micro divide in health-care governance.

PubMed

Bodolica, Virginia; Spraggon, Martin; Tofan, Gabriela

2016-08-01

Extant studies demonstrate that macro (hierarchical) and micro (relational) governance initiatives in health-care settings continue to be developed in isolation rather than interactively. Government-driven hierarchical governance endeavours that guide health-care reforms and medical practice are disconnected from micro-level physician-patient interactions being unable to account for patient preferences in the macro-level policymaking. We undertake a review of the recent literature to couch our argument for a unified governance framework for bridging the macro-micro divide in medical contexts. Adopting an interdisciplinary approach to health-care delivery, we maintain that the (strong) structuration theory provides a fruitful opportunity for narrowing the gap between hierarchical and relational governance. Emphasizing the coexistence of institutional structures and human agency, the (strong) structuration theory elucidates how macro and micro governance devices shape each other's structure via mutually reinforcing cycles of influence. Micro-level encounters between patients and physicians give rise to social structures that constitute the constraining and enabling forces through which macro-level health-care infrastructures are altered and reproduced over time. Permitting to illustrate how patients' agency can effectively emerge from complex networks of clinical trajectories, the advanced structuration framework for macro-micro governance integration avoids the extremes of paternalism and autonomy through a balanced consideration of professional judgement and patient preferences. The macro-micro integration of governance efforts is a critical issue in both high-income states, where medical institutions attempt to deploy substantial realignment efforts, and developing nations, which are lagging behind due to leadership weaknesses and lower levels of governmental investment. A key priority for regulators is the identification of relevant systems to support this holistic governance by providing clinicians with needed resources for focusing on patient advocacy and installing enabling mechanisms for incorporating patients' inputs in health-care reforms and policymaking. © 2015 John Wiley & Sons Ltd.

Gluten-free food database: the nutritional quality and cost of packaged gluten-free foods

PubMed Central

Schwingshackl, Lukas; Billmann, Alina; Mystek, Aleksandra; Hickelsberger, Melanie; Bauer, Gregor; König, Jürgen

2015-01-01

Notwithstanding a growth in popularity and consumption of gluten-free (GF) food products, there is a lack of substantiated analysis of the nutritional quality compared with their gluten-containing counterparts. To put GF foods into proper perspective both for those who need it (patients with celiac disease) and for those who do not, we provide contemporary data about cost and nutritional quality of GF food products. The objective of this study is to develop a food composition database for seven discretionary food categories of packaged GF products. Nutrient composition, nutritional information and cost of foods from 63 GF and 126 gluten-containing counterparts were systematically obtained from 12 different Austrian supermarkets. The nutrition composition (macro and micronutrients) was analyzed by using two nutrient composition databases in a stepwise approximation process. A total of 63 packaged GF foods were included in the analysis representing a broad spectrum of different GF categories (flour/bake mix, bread and bakery products, pasta and cereal-based food, cereals, cookies and cakes, snacks and convenience food). Our results show that the protein content of GF products is >2 fold lower across 57% of all food categories. In 65% of all GF foods, low sodium content was observed (defined as <120 mg/100 g). Across all GF products, 19% can be classified as source high in fiber (defined as >6g/100 g). On average, GF foods were substantially higher in cost, ranging from +205% (cereals) to +267% (bread and bakery products) compared to similar gluten-containing products. In conclusion, our results indicate that for GF foods no predominant health benefits are indicated; in fact, some critical nutrients must be considered when being on a GF diet. For individuals with celiac disease, the GF database provides a helpful tool to identify the food composition of their medical diet. For healthy consumers, replacing gluten-containing products with GF foods is aligned with substantial cost differences but GF foods do not provide additional health benefits from a nutritional perspective. PMID:26528408

Physics-based process modeling, reliability prediction, and design guidelines for flip-chip devices

NASA Astrophysics Data System (ADS)

Michaelides, Stylianos

Flip Chip on Board (FCOB) and Chip-Scale Packages (CSPs) are relatively new technologies that are being increasingly used in the electronic packaging industry. Compared to the more widely used face-up wirebonding and TAB technologies, flip-chips and most CSPs provide the shortest possible leads, lower inductance, higher frequency, better noise control, higher density, greater input/output (I/O), smaller device footprint and lower profile. However, due to the short history and due to the introduction of several new electronic materials, designs, and processing conditions, very limited work has been done to understand the role of material, geometry, and processing parameters on the reliability of flip-chip devices. Also, with the ever-increasing complexity of semiconductor packages and with the continued reduction in time to market, it is too costly to wait until the later stages of design and testing to discover that the reliability is not satisfactory. The objective of the research is to develop integrated process-reliability models that will take into consideration the mechanics of assembly processes to be able to determine the reliability of face-down devices under thermal cycling and long-term temperature dwelling. The models incorporate the time and temperature-dependent constitutive behavior of various materials in the assembly to be able to predict failure modes such as die cracking and solder cracking. In addition, the models account for process-induced defects and macro-micro features of the assembly. Creep-fatigue and continuum-damage mechanics models for the solder interconnects and fracture-mechanics models for the die have been used to determine the reliability of the devices. The results predicted by the models have been successfully validated against experimental data. The validated models have been used to develop qualification and test procedures for implantable medical devices. In addition, the research has helped develop innovative face-down devices without the underfill, based on the thorough understanding of the failure modes. Also, practical design guidelines for material, geometry and process parameters for reliable flip-chip devices have been developed.

Influence of the individual or combined application of biochar and slurry on soil macro-aggregate formation under varying moisture conditions

NASA Astrophysics Data System (ADS)

Kaiser, Michael; Grunwald, Dennis; Koch, Heinz-Josef; Rauber, Rolf; Ludwig, Bernard

2017-04-01

The formation of aggregates is of large importance for the structure and the storage of organic matter (OM) in soil. Although positive effects of organic soil additives on the formation of macro-aggregates (> 250 µm) have been reported, the influence of biochar especially applied in combination with other organic amendments remains unclear. Furthermore, studies on the effect of varying soil moisture conditions in form of drying-rewetting cycles on soil aggregate dynamics in the presence of biochar are almost missing. The objectives of this study were to analyze the effects of biochar and slurry applied to the soil individually or in combination on the formation of macro-aggregates under constant and under varying moisture conditions. We sampled four silty loam soils, carefully crushed the soil macro-aggregates, and incubated the soil at 15 °C for 60 days with the following additions: (i) none (control), (ii) biochar (12 % of dry soil mass), (iii) slurry (150 kg N ha-1), (iv) biochar (6 %) + slurry (75 kg N ha-1), (v) biochar (12 %) + slurry (75 kg N ha-1), (vi) biochar (6 %) + slurry (150 kg N ha-1) and (vii) biochar (12 %) + slurry (150 kg N ha-1). The samples were further subdivided into two groups that were incubated under conditions of constant soil moisture and of three drying-rewetting cycles. The CO2 fluxes were continuously measured during the incubation period and the samples were analyzed for microbial biomass C, macro-aggregate yields and macro-aggregate-associated C after finishing the experiment. We found the application of biochar to result in lower macro-aggregate yields with or without slurry compared to the control or the individual slurry application. In contrast, similar or higher C contents in the macro-aggregate fraction of the biochar treatments as compared to the control or slurry treatments were found indicating an occlusion of biochar in macro-aggregates. Due to the sorption characteristics of biochar, we assume the aggregate formation to be partially abiotic with direct interactions between biochar, (adsorbed) slurry, and the mineral phase of the soil. Therefore, in the presence of slurry, a prolonged period of microbial processing does not seem to be necessary to render the biochar suitable to form aggregates. Drying and rewetting of the samples resulted in significantly lower aggregate yields especially for the biochar/slurry mixtures. The drying of slurry as thought to be the most important macro-aggregate binding agent in these treatments might irreversibly disrupt large amounts of the macro-aggregates formed. Additionally, the general lower microbial biomass C and CO2 emissions for the samples experiencing drying-rewetting cycles compared to the constantly moist soils point toward less microbial activity under varying moisture conditions. This might have led to less microbial derived aggregate binding agents contributing to the lower aggregate yields found for the samples from the drying-rewetting treatments. Beside the amount and type of binding agents derived from organic soil additives, the formation and stability of soil macro-aggregate seem also to be controlled by climatically controlled soil moisture conditions.

Individualized Human CAD Models: Anthropmetric Morphing and Body Tissue Layering

DTIC Science & Technology

2014-07-31

Part Flow Chart of the Interaction among VBA Macros, Excel® Spreadsheet, and SolidWorks Front View of the Male and Female Soldier CAD Model...yellow highlighting. The spreadsheet is linked to the CAD model by macros created with the Visual Basic for Application ( VBA ) editor in Microsoft Excel...basically three working parts to the anthropometric morphing that are all interconnected ( VBA macros, Excel spreadsheet, and SolidWorks). The flow

Learning to Solve Problems by Searching for Macro-Operators

DTIC Science & Technology

1983-07-01

executing generalized robot plans. Aritificial Intelligence 3:25 1-288, 1972. [Frey 821 Frey, Alexander Ii. Jr., and David Singmaster. Handbook of Cubik...and that searching for macros may be a useful general learning paradigm. 1.1. Introduction One view of die die field of artificial intelligence is that... intelligence literature [Schofield 67, Gaschnig 79, Ericsson 761 and provides one of the simplest examples of the operation of the Macro Problem Solver. It

Macro-level social forces and micro-level consequences: poverty, alternate occupations, and drug dealing.

PubMed

Dunlap, Eloise; Johnson, Bruce D; Kotarba, Joseph A; Fackler, Jennifer L

2010-01-01

This article is an empirical examination of the ways in which macro-level social forces have had micro-level consequences in the New Orleans drug market. The article illustrates a clear connection between poverty and entrance into the drug market, as mitigated by race, lack of societal opportunity, lack of social capital, distressed families, and closed neighborhoods. Specifically, the research illustrates the mechanisms by which macro-level social forces intersect to legitimize drug dealing as a viable alternative method of acquiring money and social capital. These intersecting macro-level social forces, such as poverty, race, family structure, and neighborhood characteristics, ultimately constrain the life chances of those living in the inner city irrespective of personal traits, individual motivations, or private achievements.

Ordered macro-microporous metal-organic framework single crystals

NASA Astrophysics Data System (ADS)

Shen, Kui; Zhang, Lei; Chen, Xiaodong; Liu, Lingmei; Zhang, Daliang; Han, Yu; Chen, Junying; Long, Jilan; Luque, Rafael; Li, Yingwei; Chen, Banglin

2018-01-01

We constructed highly oriented and ordered macropores within metal-organic framework (MOF) single crystals, opening up the area of three-dimensional–ordered macro-microporous materials (that is, materials containing both macro- and micropores) in single-crystalline form. Our methodology relies on the strong shaping effects of a polystyrene nanosphere monolith template and a double-solvent–induced heterogeneous nucleation approach. This process synergistically enabled the in situ growth of MOFs within ordered voids, rendering a single crystal with oriented and ordered macro-microporous structure. The improved mass diffusion properties of such hierarchical frameworks, together with their robust single-crystalline nature, endow them with superior catalytic activity and recyclability for bulky-molecule reactions, as compared with conventional, polycrystalline hollow, and disordered macroporous ZIF-8.

Consumption of ready-made meals and increased risk of obesity: findings from the Observation of Cardiovascular Risk Factors in Luxembourg (ORISCAV-LUX) study.

PubMed

Alkerwi, Ala'a; Crichton, Georgina E; Hébert, James R

2015-01-28

The consumption of ready-made meals, such as pre-packaged dishes, available at grocery stores and fast-food restaurants, is a habit related to our modern fast-paced lives. No study has examined the association of daily ready-made meal consumption with diet quality or health-related outcomes. The present study aimed to investigate the association between self-reported ready-made meal consumption and diet quality, as measured by compliance with dietary recommendations and with a set of adiposity measures, in a nationally representative sample of 1352 subjects, aged 18-69 years, participating in the nationwide population-based ORISCAV-LUX (Observation of Cardiovascular Risk Factors in Luxembourg) survey. The daily consumption of ready-made meals was calculated as follows: frequency of consumption × portion size × number of portions consumed. The sum of the daily consumption values of the eleven pre-packaged dishes included in the FFQ represented the total daily consumption of ready-made meals (g/d) for each participant. About 97% of the participants reported daily consumption of ready-made meals. The intake was highly prevalent in men living alone and varied according to education level. Ready-made meal consumption provided >7% of total daily energy. The fractions (%) of macro- and micronutrients derived from daily consumption of ready-made meals varied from 10% for total cholesterol to 0.65% for total fibre. Increased consumption of ready-made meals was found to be independently associated with abdominal obesity. On controlling for age, sex, socio-economic status and lifestyle factors, daily consumption of ready-made meals was found to be associated with higher energy intake and with poor compliance with national nutritional recommendations, and hence it could plausibly increase the risk of central obesity and fat deposition.

iSBatch: a batch-processing platform for data analysis and exploration of live-cell single-molecule microscopy images and other hierarchical datasets.

PubMed

Caldas, Victor E A; Punter, Christiaan M; Ghodke, Harshad; Robinson, Andrew; van Oijen, Antoine M

2015-10-01

Recent technical advances have made it possible to visualize single molecules inside live cells. Microscopes with single-molecule sensitivity enable the imaging of low-abundance proteins, allowing for a quantitative characterization of molecular properties. Such data sets contain information on a wide spectrum of important molecular properties, with different aspects highlighted in different imaging strategies. The time-lapsed acquisition of images provides information on protein dynamics over long time scales, giving insight into expression dynamics and localization properties. Rapid burst imaging reveals properties of individual molecules in real-time, informing on their diffusion characteristics, binding dynamics and stoichiometries within complexes. This richness of information, however, adds significant complexity to analysis protocols. In general, large datasets of images must be collected and processed in order to produce statistically robust results and identify rare events. More importantly, as live-cell single-molecule measurements remain on the cutting edge of imaging, few protocols for analysis have been established and thus analysis strategies often need to be explored for each individual scenario. Existing analysis packages are geared towards either single-cell imaging data or in vitro single-molecule data and typically operate with highly specific algorithms developed for particular situations. Our tool, iSBatch, instead allows users to exploit the inherent flexibility of the popular open-source package ImageJ, providing a hierarchical framework in which existing plugins or custom macros may be executed over entire datasets or portions thereof. This strategy affords users freedom to explore new analysis protocols within large imaging datasets, while maintaining hierarchical relationships between experiments, samples, fields of view, cells, and individual molecules.

Reusable Space Vehicle Ground Operations Baseline Conceptual Model

DTIC Science & Technology

2004-03-01

Micro .........................................................................129 Figure B-91. Lower Forward Fuselage Macro...129 Figure B-92. Lower Forward Fuselage Micro ...Fuselage Micro ................................................................130 Figure B-95. Lower Wing Macro

Computer-based Astronomy Labs for Non-science Majors

NASA Astrophysics Data System (ADS)

Smith, A. B. E.; Murray, S. D.; Ward, R. A.

1998-12-01

We describe and demonstrate two laboratory exercises, Kepler's Third Law and Stellar Structure, which are being developed for use in an astronomy laboratory class aimed at non-science majors. The labs run with Microsoft's Excel 98 (Macintosh) or Excel 97 (Windows). They can be run in a classroom setting or in an independent learning environment. The intent of the labs is twofold; first and foremost, students learn the subject matter through a series of informational frames. Next, students enhance their understanding by applying their knowledge in lab procedures, while also gaining familiarity with the use and power of a widely-used software package and scientific tool. No mathematical knowledge beyond basic algebra is required to complete the labs or to understand the computations in the spreadsheets, although the students are exposed to the concepts of numerical integration. The labs are contained in Excel workbook files. In the files are multiple spreadsheets, which contain either a frame with information on how to run the lab, material on the subject, or one or more procedures. Excel's VBA macro language is used to automate the labs. The macros are accessed through button interfaces positioned on the spreadsheets. This is done intentionally so that students can focus on learning the subject matter and the basic spreadsheet features without having to learn advanced Excel features all at once. Students open the file and progress through the informational frames to the procedures. After each procedure, student comments and data are automatically recorded in a preformatted Lab Report spreadsheet. Once all procedures have been completed, the student is prompted for a filename in which to save their Lab Report. The lab reports can then be printed or emailed to the instructor. The files will have full worksheet and workbook protection, and will have a "redo" feature at the end of the lab for students who want to repeat a procedure.

Nanomechanics of cellulose crystals and cellulose-based polymer composites

NASA Astrophysics Data System (ADS)

Pakzad, Anahita

Cellulose-polymer composites have potential applications in aerospace and transportation areas where lightweight materials with high mechanical properties are needed. In addition, these economical and biodegradable composites have been shown to be useful as polymer electrolytes, packaging structures, optoelectronic devices, and medical implants such as wound dressing and bone scaffolds. In spite of the above mentioned advantages and potential applications, due to the difficulties associated with synthesis and processing techniques, application of cellulose crystals (micro and nano sized) for preparation of new composite systems is limited. Cellulose is hydrophilic and polar as opposed to most of common thermoplastics, which are non-polar. This results in complications in addition of cellulose crystals to polymer matrices, and as a result in achieving sufficient dispersion levels, which directly affects the mechanical properties of the composites. As in other composite materials, the properties of cellulose-polymer composites depend on the volume fraction and the properties of individual phases (the reinforcement and the polymer matrix), the dispersion quality of the reinforcement through the matrix and the interaction between CNCs themselves and CNC and the matrix (interphase). In order to develop economical cellulose-polymer composites with superior qualities, the properties of individual cellulose crystals, as well as the effect of dispersion of reinforcements and the interphase on the properties of the final composites should be understood. In this research, the mechanical properties of CNC polymer composites were characterized at the macro and nano scales. A direct correlation was made between: - Dispersion quality and macro-mechanical properties - Nanomechanical properties at the surface and tensile properties - CNC diameter and interphase thickness. Lastly, individual CNCs from different sources were characterized and for the first time size-scale effect on their nanomechanical properties were reported. Then the effect of CNC surface modification on the mechanical properties was studied and correlated to the crystalline structure of these materials.

Selections from 2017: Image Processing with AstroImageJ

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2017-12-01

Editors note:In these last two weeks of 2017, well be looking at a few selections that we havent yet discussed on AAS Nova from among the most-downloaded paperspublished in AAS journals this year. The usual posting schedule will resume in January.AstroImageJ: Image Processing and Photometric Extraction for Ultra-Precise Astronomical Light CurvesPublished January2017The AIJ image display. A wide range of astronomy specific image display options and image analysis tools are available from the menus, quick access icons, and interactive histogram. [Collins et al. 2017]Main takeaway:AstroImageJ is a new integrated software package presented in a publication led byKaren Collins(Vanderbilt University,Fisk University, andUniversity of Louisville). Itenables new users even at the level of undergraduate student, high school student, or amateur astronomer to quickly start processing, modeling, and plotting astronomical image data.Why its interesting:Science doesnt just happen the momenta telescope captures a picture of a distantobject. Instead, astronomical images must firstbe carefully processed to clean up thedata, and this data must then be systematically analyzed to learn about the objects within it. AstroImageJ as a GUI-driven, easily installed, public-domain tool is a uniquelyaccessible tool for thisprocessing and analysis, allowing even non-specialist users to explore and visualizeastronomical data.Some features ofAstroImageJ:(as reported by Astrobites)Image calibration:generate master flat, dark, and bias framesImage arithmetic:combineimages viasubtraction, addition, division, multiplication, etc.Stack editing:easily perform operations on a series of imagesImage stabilization and image alignment featuresPrecise coordinate converters:calculate Heliocentric and Barycentric Julian DatesWCS coordinates:determine precisely where atelescope was pointed for an image by PlateSolving using Astronomy.netMacro and plugin support:write your own macrosMulti-aperture photometry with interactive light curve fitting:plot light curves of a star in real timeCitationKaren A. Collins et al 2017 AJ 153 77. doi:10.3847/1538-3881/153/2/77

Thermo-Oxidative Induced Damage in Polymer Composites: Microstructure Image-Based Multi-Scale Modeling and Experimental Validation

NASA Astrophysics Data System (ADS)

Hussein, Rafid M.; Chandrashekhara, K.

2017-11-01

A multi-scale modeling approach is presented to simulate and validate thermo-oxidation shrinkage and cracking damage of a high temperature polymer composite. The multi-scale approach investigates coupled transient diffusion-reaction and static structural at macro- to micro-scale. The micro-scale shrinkage deformation and cracking damage are simulated and validated using 2D and 3D simulations. Localized shrinkage displacement boundary conditions for the micro-scale simulations are determined from the respective meso- and macro-scale simulations, conducted for a cross-ply laminate. The meso-scale geometrical domain and the micro-scale geometry and mesh are developed using the object oriented finite element (OOF). The macro-scale shrinkage and weight loss are measured using unidirectional coupons and used to build the macro-shrinkage model. The cross-ply coupons are used to validate the macro-shrinkage model by the shrinkage profiles acquired using scanning electron images at the cracked surface. The macro-shrinkage model deformation shows a discrepancy when the micro-scale image-based cracking is computed. The local maximum shrinkage strain is assumed to be 13 times the maximum macro-shrinkage strain of 2.5 × 10-5, upon which the discrepancy is minimized. The microcrack damage of the composite is modeled using a static elastic analysis with extended finite element and cohesive surfaces by considering the modulus spatial evolution. The 3D shrinkage displacements are fed to the model using node-wise boundary/domain conditions of the respective oxidized region. Microcrack simulation results: length, meander, and opening are closely matched to the crack in the area of interest for the scanning electron images.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siranosian, Antranik Antonio; Schembri, Philip Edward; Luscher, Darby Jon

The Los Alamos National Laboratory's Weapon Systems Engineering division's Advanced Engineering Analysis group employs material constitutive models of composites for use in simulations of components and assemblies of interest. Experimental characterization, modeling and prediction of the macro-scale (i.e. continuum) behaviors of these composite materials is generally difficult because they exhibit nonlinear behaviors on the meso- (e.g. micro-) and macro-scales. Furthermore, it can be difficult to measure and model the mechanical responses of the individual constituents and constituent interactions in the composites of interest. Current efforts to model such composite materials rely on semi-empirical models in which meso-scale properties are inferredmore » from continuum level testing and modeling. The proposed approach involves removing the difficulties of interrogating and characterizing micro-scale behaviors by scaling-up the problem to work with macro-scale composites, with the intention of developing testing and modeling capabilities that will be applicable to the mesoscale. This approach assumes that the physical mechanisms governing the responses of the composites on the meso-scale are reproducible on the macro-scale. Working on the macro-scale simplifies the quantification of composite constituents and constituent interactions so that efforts can be focused on developing material models and the testing techniques needed for calibration and validation. Other benefits to working with macro-scale composites include the ability to engineer and manufacture—potentially using additive manufacturing techniques—composites that will support the application of advanced measurement techniques such as digital volume correlation and three-dimensional computed tomography imaging, which would aid in observing and quantifying complex behaviors that are exhibited in the macro-scale composites of interest. Ultimately, the goal of this new approach is to develop a meso-scale composite modeling framework, applicable to many composite materials, and the corresponding macroscale testing and test data interrogation techniques to support model calibration.« less

The BBN Knowledge Acquisition Project

DTIC Science & Technology

1988-09-01

Optation 17 S . Large-Scale Revisions of Knowledge Bases 19 5.1 The Macro and Structure Editor 19 5.2 Developing Macro Editing Procedre 20 5.2.1 Macro...consistency checking foreach style of representaton easier and mote efficient, so that knowledge engineers and subject matter expert s can work together to... s ~Ta OIM-iJC ~Va Coetnin: MILECSXCT 8.1.3.1 Local Comumand Menus Anytime ICREM ais~laying a view of a particular kind of knowledge , the State Winsdow

MacroH2A1 associates with nuclear lamina and maintains chromatin architecture in mouse liver cells.

PubMed

Fu, Yuhua; Lv, Pin; Yan, Guoquan; Fan, Hui; Cheng, Lu; Zhang, Feng; Dang, Yongjun; Wu, Hao; Wen, Bo

2015-11-25

In the interphase nucleus, chromatin is organized into three-dimensional conformation to coordinate genome functions. The lamina-chromatin association is important to facilitate higher-order chromatin in mammalian cells, but its biological significances and molecular mechanisms remain poorly understood. One obstacle is that the list of lamina-associated proteins remains limited, presumably due to the inherent insolubility of lamina proteins. In this report, we identified 182 proteins associated with lamin B1 (a constitutive component of lamina) in mouse hepatocytes, by adopting virus-based proximity-dependent biotin identification. These proteins are functionally related to biological processes such as chromatin organization. As an example, we validated the association between lamin B1 and core histone macroH2A1, a histone associated with repressive chromatin. Furthermore, we mapped Lamina-associated domains (LADs) in mouse liver cells and found that boundaries of LADs are enriched for macroH2A. More interestingly, knocking-down of macroH2A1 resulted in the release of heterochromatin foci marked by histone lysine 9 trimethylation (H3K9me3) and the decondensation of global chromatin structure. However, down-regulation of lamin B1 led to redistribution of macroH2A1. Taken together, our data indicated that macroH2A1 is associated with lamina and is required to maintain chromatin architecture in mouse liver cells.

The role of collaboration in facilitating policy change in youth violence prevention: a review of the literature.

PubMed

Sugimoto-Matsuda, Jeanelle J; Braun, Kathryn L

2014-04-01

Youth violence remains a serious public health issue nationally and internationally. The social ecological model has been recommended as a framework to design youth violence prevention initiatives, requiring interventions at the micro-, meso-, exo-, and macro-levels. However, documentation of interventions at the macro-level, particularly those that address policy issues, is limited. This study examines a recommendation in the literature that formalized collaborations play a vital role in stimulating macro-level policy change. The purpose of this systematic literature review is to examine existing youth violence prevention collaborations and evaluate their policy-related outcomes. The search found 23 unique collaborations focused on youth violence prevention. These were organized into three groups based on the "catalyst" for action for the collaboration-internal (momentum began within the community), external (sparked by an external agency), or policy (mandated by law). Findings suggest that internally catalyzed collaborations were most successful at changing laws to address youth violence, while both internally and externally catalyzed collaborations successfully attained policy change at the organizational level. A conceptual model is proposed, describing a potential pathway for achieving macro-level change via collaboration. Recommendations for future research and practice are suggested, including expansion of this study to capture additional collaborations, investigation of macro-level changes with a primary prevention focus, and improvement of evaluation, dissemination, and translation of macro-level initiatives.

The Role of Collaboration in Facilitating Policy Change in Youth Violence Prevention: a Review of the Literature

PubMed Central

Braun, Kathryn L.

2015-01-01

Youth violence remains a serious public health issue nationally and internationally. The social ecological model has been recommended as a framework to design youth violence prevention initiatives, requiring interventions at the micro-, meso-, exo-, and macro-levels. However, documentation of interventions at the macro-level, particularly those that address policy issues, is limited. This study examines a recommendation in the literature that formalized collaborations play a vital role in stimulating macro-level policy change. The purpose of this systematic literature review is to examine existing youth violence prevention collaborations and evaluate their policy-related outcomes. The search found 23 unique collaborations focused on youth violence prevention. These were organized into three groups based on the “catalyst” for action for the collaboration—internal (momentum began with-in the community), external (sparked by an external agency), or policy (mandated by law). Findings suggest that internally catalyzed collaborations were most successful at changing laws to address youth violence, while both internally and externally catalyzed collaborations successfully attained policy change at the organizational level. A conceptual model is proposed, describing a potential pathway for achieving macro-level change via collaboration. Recommendations for future research and practice are suggested, including expansion of this study to capture additional collaborations, investigation of macro-level changes with a primary prevention focus, and improvement of evaluation, dissemination, and translation of macro-level initiatives. PMID:23430580

Permeability of Granite Including Macro-Fracture Naturally Filled with Fine-Grained Minerals

NASA Astrophysics Data System (ADS)

Nara, Yoshitaka; Kato, Masaji; Niri, Ryuhei; Kohno, Masanori; Sato, Toshinori; Fukuda, Daisuke; Sato, Tsutomu; Takahashi, Manabu

2018-03-01

Information on the permeability of rock is essential for various geoengineering projects, such as geological disposal of radioactive wastes, hydrocarbon extraction, and natural hazard risk mitigation. It is especially important to investigate how fractures and pores influence the physical and transport properties of rock. Infiltration of groundwater through the damage zone fills fractures in granite with fine-grained minerals. However, the permeability of rock possessing a fracture naturally filled with fine-grained mineral grains has yet to be investigated. In this study, the permeabilities of granite samples, including a macro-fracture filled with clay and a mineral vein, are investigated. The permeability of granite with a fine-grained mineral vein agrees well with that of the intact sample, whereas the permeability of granite possessing a macro-fracture filled with clay is lower than that of the macro-fractured sample. The decrease in the permeability is due to the filling of fine-grained minerals and clay in the macro-fracture. It is concluded that the permeability of granite increases due to the existence of the fractures, but decreases upon filling them with fine-grained minerals.

Data-Science Analysis of the Macro-scale Features Governing the Corrosion to Crack Transition in AA7050-T7451

NASA Astrophysics Data System (ADS)

Co, Noelle Easter C.; Brown, Donald E.; Burns, James T.

2018-05-01

This study applies data science approaches (random forest and logistic regression) to determine the extent to which macro-scale corrosion damage features govern the crack formation behavior in AA7050-T7451. Each corrosion morphology has a set of corresponding predictor variables (pit depth, volume, area, diameter, pit density, total fissure length, surface roughness metrics, etc.) describing the shape of the corrosion damage. The values of the predictor variables are obtained from white light interferometry, x-ray tomography, and scanning electron microscope imaging of the corrosion damage. A permutation test is employed to assess the significance of the logistic and random forest model predictions. Results indicate minimal relationship between the macro-scale corrosion feature predictor variables and fatigue crack initiation. These findings suggest that the macro-scale corrosion features and their interactions do not solely govern the crack formation behavior. While these results do not imply that the macro-features have no impact, they do suggest that additional parameters must be considered to rigorously inform the crack formation location.

An new MHD/kinetic model for exploring energetic particle production in macro-scale systems

NASA Astrophysics Data System (ADS)

Drake, J. F.; Swisdak, M.; Dahlin, J. T.

2017-12-01

A novel MHD/kinetic model is being developed to explore magneticreconnection and particle energization in macro-scale systems such asthe solar corona and the outer heliosphere. The model blends the MHDdescription with a macro-particle description. The rationale for thismodel is based on the recent discovery that energetic particleproduction during magnetic reconnection is controlled by Fermireflection and Betatron acceleration and not parallel electricfields. Since the former mechanisms are not dependent on kineticscales such as the Debye length and the electron and ion inertialscales, a model that sheds these scales is sufficient for describingparticle acceleration in macro-systems. Our MHD/kinetic model includesmacroparticles laid out on an MHD grid that are evolved with the MHDfields. Crucially, the feedback of the energetic component on the MHDfluid is included in the dynamics. Thus, energy of the total system,the MHD fluid plus the energetic component, is conserved. The systemhas no kinetic scales and therefore can be implemented to modelenergetic particle production in macro-systems with none of theconstraints associated with a PIC model. Tests of the new model insimple geometries will be presented and potential applications will bediscussed.

SAS macro programs for geographically weighted generalized linear modeling with spatial point data: applications to health research.

PubMed

Chen, Vivian Yi-Ju; Yang, Tse-Chuan

2012-08-01

An increasing interest in exploring spatial non-stationarity has generated several specialized analytic software programs; however, few of these programs can be integrated natively into a well-developed statistical environment such as SAS. We not only developed a set of SAS macro programs to fill this gap, but also expanded the geographically weighted generalized linear modeling (GWGLM) by integrating the strengths of SAS into the GWGLM framework. Three features distinguish our work. First, the macro programs of this study provide more kernel weighting functions than the existing programs. Second, with our codes the users are able to better specify the bandwidth selection process compared to the capabilities of existing programs. Third, the development of the macro programs is fully embedded in the SAS environment, providing great potential for future exploration of complicated spatially varying coefficient models in other disciplines. We provided three empirical examples to illustrate the use of the SAS macro programs and demonstrated the advantages explained above. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Sulfonated macro-RAFT agents for the surfactant-free synthesis of cerium oxide-based hybrid latexes.

PubMed

Garnier, Jérôme; Warnant, Jérôme; Lacroix-Desmazes, Patrick; Dufils, Pierre-Emmanuel; Vinas, Jérôme; van Herk, Alex

2013-10-01

Three types of amphiphatic macro-RAFT agents were employed as compatibilizers to promote the polymerization reaction at the surface of nanoceria for the synthesis of CeO2-based hybrid latexes. Macro-RAFT copolymers and terpolymers were first synthesized employing various combinations of butyl acrylate as a hydrophobic monomer and acrylic acid (AA) and/or 2-acrylamido-2-methylpropane sulfonic acid (AMPS) as hydrophilic monomers. After characterizing the adsorption of these macro-RAFT agents at the cerium oxide surface by UV-visible spectrometry, emulsion copolymerization reactions of styrene and methyl acrylate were then carried out in the presence of the surface-modified nanoceria. Dynamic Light Scattering and cryo-Transmission Electron Microscopy were employed to confirm the hybrid structure of the final CeO2/polymer latexes, and proved that the presence of acrylic acid units in amphiphatic macro-RAFT agents enabled an efficient formation of hybrid structures, while the presence of AMPS units, when combined with AA units, resulted in a better distribution of cerium oxide nanoclusters between latex particles. Copyright © 2013 Elsevier Inc. All rights reserved.

Dynamic Modeling of New Technology Succession: Projecting the Impact of Macro Events and Micro Behaviors On Software Market Cycles

NASA Astrophysics Data System (ADS)

Mertz, Sharon A.; Groothuis, Adam; Fellman, Philip Vos

The subject of technology succession and new technology adoption in a generalized sense has been addressed by numerous authors for over one hundred years. Models which accommodate macro-level events as well as micro-level actions are needed to gain insight to future market outcomes. In the ICT industry, macro-level factors affecting technology adoption include global events and shocks, economic factors, and global regulatory trends. Micro-level elements involve individual agent actions and interactions, such as the behaviors of buyers and suppliers in reaction to each other, and to macro events. Projecting technology adoption and software market composition and growth requires evaluating a special set of technology characteristics, buyer behaviors, and supplier issues and responses which make this effort particularly challenging.

Filtered cathodic arc source

DOEpatents

Falabella, S.; Sanders, D.M.

1994-01-18

A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge is described. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45[degree] to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles. 3 figures.

Filtered cathodic arc source

DOEpatents

Falabella, Steven; Sanders, David M.

1994-01-01

A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45.degree. to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles.

Effect of Irregularity in Shape and Boundary of a Macro-Texture Region in Titanium (Postprint)

DTIC Science & Technology

2015-10-15

AFRL-RX-WP-JA-2016-0328 EFFECT OF IRREGULARITY IN SHAPE AND BOUNDARY OF A MACRO-TEXTURE REGION IN TITANIUM (POSTPRINT) James L...2 October 2014 – 15 September 2015 4. TITLE AND SUBTITLE EFFECT OF IRREGULARITY IN SHAPE AND BOUNDARY OF A MACRO-TEXTURE REGION IN TITANIUM ...aerospace grade titanium alloy material are measured to be about the same level as corner trapped shear wave signals. In addition to the abnormally high

Immobilization of enzymes by bioaffinity layering.

PubMed

Singh, Veena; Sardar, Meryam; Gupta, Munishwar Nath

2013-01-01

Bioaffinity immobilization exploits the affinity of the enzyme to a macro-(affinity ligand). Such a macro-(affinity ligand) could be a lectin, a water-soluble polymer, or a bioconjugate of a water-soluble polymer and the appropriate affinity ligand. Successive layering of the enzyme and the macro-(affinity ligand) on a matrix allows deposition of a large amount of enzyme activity on a small surface. Illustrative protocols show affinity layering of a pectinase and horseradish peroxidase on Concanavalin A-agarose and Concanavalin A-Sephadex matrices, respectively.

[Characteristics of ground-dwelling soil macro-arthropod communities in a biodiversity monitoring plot of black soil cropland, northeastern China].

PubMed

Liu, Jie; Gao, Mie Xiang; Wu, Dong Hui

2017-12-01

Agro-ecosystem is an important component of terrestrial ecosystems and it is one of the key areas of global ecological and environmental studies. A 16 hm 2 permanent plot in black soil cropland was built to study the community structure of soil biodiversity in typical black soil region in Northeast China. Pitfall trap was used to investigate the ground-dwelling soil macro-arthropods from August to October 2015 in accordance with the three crop growth stages: whirling stage, silking stage, and milk stage. A total of 5284 ground-dwelling soil macro-arthropods belonging to 47 species were captured sorted into 3 classes, 12 orders, 32 families. 3 dominant groups and 11 common groups were found. Phytophages and Omnivores were dominant groups. The individuals and species numbers of ground-dwelling soil macro-arthropods had significant changes with the vegetative growth period. The maximum values of the Shannon index, Margalef index, Pielou index of soil macro-arthropods all appeared in September, but the maximum dominant index appeared in August. From the variation coefficient (CV) and spatial interpolation of different species, it could be seen that there was heterogeneity in the horizontal direction of the ground-dwelling soil macro-arthropod communities. Regarding the relationships between the ground-dwelling soil macro-arthropod communities and soil environmental factors including soil pH, soil organic matter, total nitrogen and soil water content, the bivariate correlation analysis showed there was no significant correlation between them. Results of canonical correspondence analysis (CCA) further indicated that the dominant and common groups were adaptable to environmental factors and widely distributed in the study area. The results showed that the species richness of ground-dwelling soil macro-arthropods was very high in cropland, and the dynamic of soil arthropod's composition and spatial distribution pattern in diffe-rent crop growth stages were significantly changed. It was indicated that biodiversity plot monitoring of black soil cropland had become important means to solve the formation and maintenance mechanism of soil fauna community through large-scale and long-term investigation.

Estimation of genetic variance for macro- and micro-environmental sensitivity using double hierarchical generalized linear models.

PubMed

Mulder, Han A; Rönnegård, Lars; Fikse, W Freddy; Veerkamp, Roel F; Strandberg, Erling

2013-07-04

Genetic variation for environmental sensitivity indicates that animals are genetically different in their response to environmental factors. Environmental factors are either identifiable (e.g. temperature) and called macro-environmental or unknown and called micro-environmental. The objectives of this study were to develop a statistical method to estimate genetic parameters for macro- and micro-environmental sensitivities simultaneously, to investigate bias and precision of resulting estimates of genetic parameters and to develop and evaluate use of Akaike's information criterion using h-likelihood to select the best fitting model. We assumed that genetic variation in macro- and micro-environmental sensitivities is expressed as genetic variance in the slope of a linear reaction norm and environmental variance, respectively. A reaction norm model to estimate genetic variance for macro-environmental sensitivity was combined with a structural model for residual variance to estimate genetic variance for micro-environmental sensitivity using a double hierarchical generalized linear model in ASReml. Akaike's information criterion was constructed as model selection criterion using approximated h-likelihood. Populations of sires with large half-sib offspring groups were simulated to investigate bias and precision of estimated genetic parameters. Designs with 100 sires, each with at least 100 offspring, are required to have standard deviations of estimated variances lower than 50% of the true value. When the number of offspring increased, standard deviations of estimates across replicates decreased substantially, especially for genetic variances of macro- and micro-environmental sensitivities. Standard deviations of estimated genetic correlations across replicates were quite large (between 0.1 and 0.4), especially when sires had few offspring. Practically, no bias was observed for estimates of any of the parameters. Using Akaike's information criterion the true genetic model was selected as the best statistical model in at least 90% of 100 replicates when the number of offspring per sire was 100. Application of the model to lactation milk yield in dairy cattle showed that genetic variance for micro- and macro-environmental sensitivities existed. The algorithm and model selection criterion presented here can contribute to better understand genetic control of macro- and micro-environmental sensitivities. Designs or datasets should have at least 100 sires each with 100 offspring.

A macro-micro robot for precise force applications

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.; Wang, Yulun

1993-01-01

This paper describes an 8 degree-of-freedom macro-micro robot capable of performing tasks which require accurate force control. Applications such as polishing, finishing, grinding, deburring, and cleaning are a few examples of tasks which need this capability. Currently these tasks are either performed manually or with dedicated machinery because of the lack of a flexible and cost effective tool, such as a programmable force-controlled robot. The basic design and control of the macro-micro robot is described in this paper. A modular high-performance multiprocessor control system was designed to provide sufficient compute power for executing advanced control methods. An 8 degree of freedom macro-micro mechanism was constructed to enable accurate tip forces. Control algorithms based on the impedance control method were derived, coded, and load balanced for maximum execution speed on the multiprocessor system.

Two-phase mixed media dielectric with macro dielectric beads for enhancing resistivity and breakdown strength

DOEpatents

Falabella, Steven; Meyer, Glenn A; Tang, Vincent; Guethlein, Gary

2014-06-10

A two-phase mixed media insulator having a dielectric fluid filling the interstices between macro-sized dielectric beads packed into a confined volume, so that the packed dielectric beads inhibit electro-hydrodynamically driven current flows of the dielectric liquid and thereby increase the resistivity and breakdown strength of the two-phase insulator over the dielectric liquid alone. In addition, an electrical apparatus incorporates the two-phase mixed media insulator to insulate between electrical components of different electrical potentials. And a method of electrically insulating between electrical components of different electrical potentials fills a confined volume between the electrical components with the two-phase dielectric composite, so that the macro dielectric beads are packed in the confined volume and interstices formed between the macro dielectric beads are filled with the dielectric liquid.

Three-dimensional macro-structures of two-dimensional nanomaterials.

PubMed

Shehzad, Khurram; Xu, Yang; Gao, Chao; Duan, Xiangfeng

2016-10-21

If two-dimensional (2D) nanomaterials are ever to be utilized as components of practical, macroscopic devices on a large scale, there is a complementary need to controllably assemble these 2D building blocks into more sophisticated and hierarchical three-dimensional (3D) architectures. Such a capability is key to design and build complex, functional devices with tailored properties. This review provides a comprehensive overview of the various experimental strategies currently used to fabricate the 3D macro-structures of 2D nanomaterials. Additionally, various approaches for the decoration of the 3D macro-structures with organic molecules, polymers, and inorganic materials are reviewed. Finally, we discuss the applications of 3D macro-structures, especially in the areas of energy, environment, sensing, and electronics, and describe the existing challenges and the outlook for this fast emerging field.

ETA-MACRO: A user's guide

NASA Astrophysics Data System (ADS)

Manne, A. S.

1981-02-01

The ETA-MACRO model is designed to estimate the extent of two way linkage between the energy sector and the balance of the economy. It represents a merger between ETA (a process analysis for energy technology assessment) together with a macroeconomic growth model providing for substitution between capital, labor, and energy inputs. The ETA-MACRO allows explicitly for: (1) energy economy interactions; (2) cost effective conservation; (3) interfuel substitution, and (4) new supply technologies, each with its own difficulties and uncertainties on dates and rates of introduction. This user's guide includes an overview of the model, an illustrative application to long term US energy projections, and technical descriptions of the macro and ETA submodels. It also includes an analysis of how market penetration rates may be related to the profitability of new technologies. Finally, the appendices provide a detailed guide to the computer implementation.

Identification of critical residues in Hepatitis E virus macro domain involved in its interaction with viral methyltransferase and ORF3 proteins

PubMed Central

Anang, Saumya; Subramani, Chandru; Nair, Vidya P.; Kaul, Sheetal; Kaushik, Nidhi; Sharma, Chandresh; Tiwari, Ashutosh; Ranjith-Kumar, CT; Surjit, Milan

2016-01-01

Hepatitis E virus (HEV) is a major cause of hepatitis in normal and organ transplant individuals. HEV open reading frame-1 encodes a polypeptide comprising of the viral nonstructural proteins as well as domains of unknown function such as the macro domain (X-domain), V, DUF3729 and Y. The macro domain proteins are ubiquitously present from prokaryotes to human and in many positive-strand RNA viruses, playing important roles in multiple cellular processes. Towards understanding the function of the HEV macro domain, we characterized its interaction partners among other HEV encoded proteins. Here, we report that the HEV X-domain directly interacts with the viral methyltransferase and the ORF3 proteins. ORF3 association with the X-domain was mediated through two independent motifs, located within its N-terminal 35aa (amino acids) and C-terminal 63-123aa. Methyltransferase interaction domain was mapped to N-terminal 30-90aa. The X-domain interacted with both ORF3 and methyltransferase through its C-terminal region, involving 66th,67th isoleucine and 101st,102nd leucine, conserved across HEV genotypes. Furthermore, ORF3 and methyltransferase competed with each other for associating with the X-domain. These findings provide molecular understanding of the interaction between the HEV macro domain, methyltransferase and ORF3, suggesting an important role of the macro domain in the life cycle of HEV. PMID:27113483

MacroBac: New Technologies for Robust and Efficient Large-Scale Production of Recombinant Multiprotein Complexes.

PubMed

Gradia, Scott D; Ishida, Justin P; Tsai, Miaw-Sheue; Jeans, Chris; Tainer, John A; Fuss, Jill O

2017-01-01

Recombinant expression of large, multiprotein complexes is essential and often rate limiting for determining structural, biophysical, and biochemical properties of DNA repair, replication, transcription, and other key cellular processes. Baculovirus-infected insect cell expression systems are especially well suited for producing large, human proteins recombinantly, and multigene baculovirus systems have facilitated studies of multiprotein complexes. In this chapter, we describe a multigene baculovirus system called MacroBac that uses a Biobricks-type assembly method based on restriction and ligation (Series 11) or ligation-independent cloning (Series 438). MacroBac cloning and assembly is efficient and equally well suited for either single subcloning reactions or high-throughput cloning using 96-well plates and liquid handling robotics. MacroBac vectors are polypromoter with each gene flanked by a strong polyhedrin promoter and an SV40 poly(A) termination signal that minimize gene order expression level effects seen in many polycistronic assemblies. Large assemblies are robustly achievable, and we have successfully assembled as many as 10 genes into a single MacroBac vector. Importantly, we have observed significant increases in expression levels and quality of large, multiprotein complexes using a single, multigene, polypromoter virus rather than coinfection with multiple, single-gene viruses. Given the importance of characterizing functional complexes, we believe that MacroBac provides a critical enabling technology that may change the way that structural, biophysical, and biochemical research is done. © 2017 Elsevier Inc. All rights reserved.

Macro-level determinants of young people's subjective health and health inequalities: a multilevel analysis in 27 welfare states.

PubMed

Rathmann, Katharina; Ottova, Veronika; Hurrelmann, Klaus; de Looze, Margarethe; Levin, Kate; Molcho, Michal; Elgar, Frank; Gabhainn, Saoirse Nic; van Dijk, Jitse P; Richter, Matthias

2015-04-01

Cross-national studies have rarely focused on young people. The aim of this study is to investigate whether macro-level determinants are associated with health and socioeconomic inequalities in young people's health. Data were collected from the Health Behaviour in School-aged Children (HBSC) study in 2006, which included 11- to 15-year old adolescents from 27 European and North American countries (n=134,632). This study includes national income, health expenditure, income inequality, and welfare regime dummy-variables as macro-level determinants, using hierarchical regression modelling. Psychosomatic health complaints and socioeconomic inequalities in psychosomatic health complaints. Adolescents in countries with higher income inequality and with liberal welfare tradition were associated with more health complaints and a stronger relationship between socioeconomic status and macro-level determinants compared to adolescents from countries with lower income inequality or the Social Democratic regime. National income and health expenditure were not related to health complaints. Countries with higher national income, public health expenditure and income inequality showed stronger associations between socioeconomic status and psychosomatic health complaints. Results showed that macro-level characteristics are relevant determinants of health and health inequalities in adolescence. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Controllable growth of polyaniline nanowire arrays on hierarchical macro/mesoporous graphene foams for high-performance flexible supercapacitors

NASA Astrophysics Data System (ADS)

Yu, Pingping; Zhao, Xin; Li, Yingzhi; Zhang, Qinghua

2017-01-01

Free-standing hierarchical macro/mesoporous flexible graphene foam have been constructed by rational intergration ofwell dispersed graphene oxide sheets and amino-modified polystyrene (PS) spheres through a facile ;templating and embossing; technique. The three dimensional (3D) macro/mesoporous flexible graphene foam not only inherits the uniform porous structures of graphene foam, but also contains hierarchical macro/mesopores on the struts by sacrificing PS spheres and the activation of KOH, which could providing rapid pathways for ionic and electronic transport to high specific capacitance. Vertically polyaniline (PANI) nanowire arrays are then uniformly deposited onto the hierarchical macro/mesoporous graphene foam(fRGO-F/PANI) by a simple in situ polymerization, which show a high specific capacitance of 939 F g-1. Thanks to the synergistic function of 3D bicontinuous hierarchical porous structure of graphene foam and effective immobilization of PANI nanowires on the struts, the assembled symmetric supercapctior with fRGO-F/PANI as electrodes exhibits a maximum energy density and power density of 20.9 Wh kg-1 and 103.2 kW kg-1, respectively. Moreover, it also displays an excellent cyclic stability with a 88.7% retention after 5000 cycles.

Automated a complex computer aided design concept generated using macros programming

NASA Astrophysics Data System (ADS)

Rizal Ramly, Mohammad; Asrokin, Azharrudin; Abd Rahman, Safura; Zulkifly, Nurul Ain Md

2013-12-01

Changing a complex Computer Aided design profile such as car and aircraft surfaces has always been difficult and challenging. The capability of CAD software such as AutoCAD and CATIA show that a simple configuration of a CAD design can be easily modified without hassle, but it is not the case with complex design configuration. Design changes help users to test and explore various configurations of the design concept before the production of a model. The purpose of this study is to look into macros programming as parametric method of the commercial aircraft design. Macros programming is a method where the configurations of the design are done by recording a script of commands, editing the data value and adding a certain new command line to create an element of parametric design. The steps and the procedure to create a macro programming are discussed, besides looking into some difficulties during the process of creation and advantage of its usage. Generally, the advantages of macros programming as a method of parametric design are; allowing flexibility for design exploration, increasing the usability of the design solution, allowing proper contained by the model while restricting others and real time feedback changes.

MACRO: a combined microchip-PCR and microarray system for high-throughput monitoring of genetically modified organisms.

PubMed

Shao, Ning; Jiang, Shi-Meng; Zhang, Miao; Wang, Jing; Guo, Shu-Juan; Li, Yang; Jiang, He-Wei; Liu, Cheng-Xi; Zhang, Da-Bing; Yang, Li-Tao; Tao, Sheng-Ce

2014-01-21

The monitoring of genetically modified organisms (GMOs) is a primary step of GMO regulation. However, there is presently a lack of effective and high-throughput methodologies for specifically and sensitively monitoring most of the commercialized GMOs. Herein, we developed a multiplex amplification on a chip with readout on an oligo microarray (MACRO) system specifically for convenient GMO monitoring. This system is composed of a microchip for multiplex amplification and an oligo microarray for the readout of multiple amplicons, containing a total of 91 targets (18 universal elements, 20 exogenous genes, 45 events, and 8 endogenous reference genes) that covers 97.1% of all GM events that have been commercialized up to 2012. We demonstrate that the specificity of MACRO is ~100%, with a limit of detection (LOD) that is suitable for real-world applications. Moreover, the results obtained of simulated complex samples and blind samples with MACRO were 100% consistent with expectations and the results of independently performed real-time PCRs, respectively. Thus, we believe MACRO is the first system that can be applied for effectively monitoring the majority of the commercialized GMOs in a single test.

Shaping electromagnetic waves using software-automatically-designed metasurfaces.

PubMed

Zhang, Qian; Wan, Xiang; Liu, Shuo; Yuan Yin, Jia; Zhang, Lei; Jun Cui, Tie

2017-06-15

We present a fully digital procedure of designing reflective coding metasurfaces to shape reflected electromagnetic waves. The design procedure is completely automatic, controlled by a personal computer. In details, the macro coding units of metasurface are automatically divided into several types (e.g. two types for 1-bit coding, four types for 2-bit coding, etc.), and each type of the macro coding units is formed by discretely random arrangement of micro coding units. By combining an optimization algorithm and commercial electromagnetic software, the digital patterns of the macro coding units are optimized to possess constant phase difference for the reflected waves. The apertures of the designed reflective metasurfaces are formed by arranging the macro coding units with certain coding sequence. To experimentally verify the performance, a coding metasurface is fabricated by automatically designing two digital 1-bit unit cells, which are arranged in array to constitute a periodic coding metasurface to generate the required four-beam radiations with specific directions. Two complicated functional metasurfaces with circularly- and elliptically-shaped radiation beams are realized by automatically designing 4-bit macro coding units, showing excellent performance of the automatic designs by software. The proposed method provides a smart tool to realize various functional devices and systems automatically.

The permeability of fractured rocks in pressurised volcanic and geothermal systems.

PubMed

Lamur, A; Kendrick, J E; Eggertsson, G H; Wall, R J; Ashworth, J D; Lavallée, Y

2017-07-21

The connectivity of rocks' porous structure and the presence of fractures influence the transfer of fluids in the Earth's crust. Here, we employed laboratory experiments to measure the influence of macro-fractures and effective pressure on the permeability of volcanic rocks with a wide range of initial porosities (1-41 vol. %) comprised of both vesicles and micro-cracks. We used a hand-held permeameter and hydrostatic cell to measure the permeability of intact rock cores at effective pressures up to 30 MPa; we then induced a macro-fracture to each sample using Brazilian tensile tests and measured the permeability of these macro-fractured rocks again. We show that intact rock permeability increases non-linearly with increasing porosity and decreases with increasing effective pressure due to compactional closure of micro-fractures. Imparting a macro-fracture both increases the permeability of rocks and their sensitivity to effective pressure. The magnitude of permeability increase induced by the macro-fracture is more significant for dense rocks. We finally provide a general equation to estimate the permeability of intact and fractured rocks, forming a basis to constrain fluid flow in volcanic and geothermal systems.

Motor unit size estimation: confrontation of surface EMG with macro EMG.

PubMed

Roeleveld, K; Stegeman, D F; Falck, B; Stålberg, E V

1997-06-01

Surface EMG (SEMG) is little used for diagnostic purposes in clinical neurophysiology, mainly because it provides little direct information on individual motor units (MUs). One of the techniques to estimate the MU size is intra-muscular Macro EMG. The present study compares SEMG with Macro EMG. Fifty-eight channel SEMG was recorded simultaneously with Macro EMG. Individual MUPs were obtained by single fiber triggered averaging. All recordings were made from the biceps brachii of healthy subjects during voluntary contraction at low force. High positive correlations were found between all Macro and Surface motor unit potential (MUP) parameters: area, peak-to-peak amplitude, negative peak amplitude and positive peak amplitude. The MUPs recorded with SEMG were dependent on the distance between the MU and the skin surface. Normalizing the SEMG parameters for MU location did not improve the correlation coefficient between the parameters of both techniques. The two measurement techniques had almost the same relative range in MUP parameters in any individual subject compared to the others, especially after normalizing the surface MUP parameters for MU location. MUPs recorded with this type of SEMG provide useful information about the MU size.

Race and Space in the 1990s: Changes in the Geographic Scale of Racial Residential Segregation, 1990-2000

PubMed Central

Reardon, Sean F.; Farrell, Chad R.; Matthews, Stephen A.; O'Sullivan, David; Bischoff, Kendra; Firebaugh, Glenn

2014-01-01

We use newly developed methods of measuring spatial segregation across a range of spatial scales to assess changes in racial residential segregation patterns in the 100 largest U.S. metropolitan areas from 1990 to 2000. Our results point to three notable trends in segregation from 1990 to 2000: 1) Hispanic-white and Asian-white segregation levels increased at both micro- and macro-scales; 2) black-white segregation declined at a micro-scale, but was unchanged at a macro-scale; and 3) for all three racial groups and for almost all metropolitan areas, macro-scale segregation accounted for more of the total metropolitan area segregation in 2000 than in 1990. Our examination of the variation in these trends among the metropolitan areas suggests that Hispanic-white and Asian-white segregation changes have been driven largely by increases in macro-scale segregation resulting from the rapid growth of the Hispanic and Asian populations in central cities. The changes in black-white segregation, in contrast, appear to be driven by the continuation of a 30-year trend in declining micro-segregation, coupled with persistent and largely stable patterns of macro-segregation. PMID:19569292

Macro scale models for freight railroad terminals.

DOT National Transportation Integrated Search

2016-03-02

The project has developed a yard capacity model for macro-level analysis. The study considers the detailed sequence and scheduling in classification yards and their impacts on yard capacities simulate typical freight railroad terminals, and statistic...

Fertility transitions and schooling: from micro- to macro-level associations.

PubMed

Eloundou-Enyegue, Parfait M; Giroux, Sarah C

2012-11-01

Research on the schooling implications of fertility transitions often faces an aggregation problem: despite policy interest in macro-level outcomes, empirical studies usually focus on the micro-level effects of sibsize on schooling. This article proposes an aggregation framework for moving from micro- to macro-level associations between fertility and schooling. The proposed framework is an improvement over previous aggregation methods in that it considers concurrent changes in the effects of sibsize, socioeconomic context, and family structure. The framework is illustrated with data from six sub-Saharan countries. Possible extensions are discussed.

Does the Effect of Micro-Environmental Factors on a Street's Appeal for Adults' Bicycle Transport Vary across Different Macro-Environments? An Experimental Study.

PubMed

Mertens, Lieze; Van Cauwenberg, Jelle; Ghekiere, Ariane; Van Holle, Veerle; De Bourdeaudhuij, Ilse; Deforche, Benedicte; Nasar, Jack; Van de Weghe, Nico; Van Dyck, Delfien

2015-01-01

Characteristics of the physical environment can be classified into two broad categories: macro- ("raw" urban planning features influenced on a regional level) and micro- (features specifically within a streetscape influenced on a neighborhood level) environmental factors. In urban planning applications, it is more feasible to modify conditions at the neighborhood level than at the regional level. Yet for the promotion of bicycle transport we need to know whether relationships between micro-environmental factors and bicycle transport depend on different types of macro-environments. This study aimed to identify whether the effect of three micro-environmental factors (i.e., evenness of the cycle path surface, speed limits and type of separation between cycle path and motorized traffic) on the street's appeal for adults' bicycle transport varied across three different macro-environments (i.e., low, medium and high residential density street). In total, 389 middle-aged adults completed a web-based questionnaire consisting of socio-demographic characteristics and a series of choice tasks with manipulated photographs, depicting two possible routes to cycle along. Conjoint analysis was used to analyze the data. Although the magnitude of the overall effects differed, in each macro-environment (i.e., low, medium and high residential density), middle-aged adults preferred a speed limit of 30 km/h, an even cycle path surface and a hedge as separation between motorized traffic and the cycle path compared to a speed limit of 50 or 70 km/h, a slightly uneven or uneven cycle path surface and a curb as separation or no separation between motorized traffic and the cycle path. Our results suggest that irrespective of the macro-environment, the same micro-environmental factors are preferred in middle-aged adults concerning the street's appeal for bicycle transport. The controlled environment simulations in the experimental choice task have the potential to inform real life environmental interventions and suggest that micro-environmental changes can have similar results in different macro-environments.

Automated toxicological screening reports of modified Agilent MSD Chemstation combined with Microsoft Visual Basic application programs.

PubMed

Choe, Sanggil; Kim, Suncheun; Choi, Hyeyoung; Choi, Hwakyoung; Chung, Heesun; Hwang, Bangyeon

2010-06-15

Agilent GC-MS MSD Chemstation offers automated library search report for toxicological screening using total ion chromatogram (TIC) and mass spectroscopy in normal mode. Numerous peaks appear in the chromatogram of biological specimen such as blood or urine and often large migrating peaks obscure small target peaks, in addition, any target peaks of low abundance regularly give wrong library search result or low matching score. As a result, retention time and mass spectrum of all the peaks in the chromatogram have to be checked to see if they are relevant. These repeated actions are very tedious and time-consuming to toxicologists. MSD Chemstation software operates using a number of macro files which give commands and instructions on how to work on and extract data from the chromatogram and spectroscopy. These macro files are developed by the own compiler of the software. All the original macro files can be modified and new macro files can be added to the original software by users. To get more accurate results with more convenient method and to save time for data analysis, we developed new macro files for reports generation and inserted new menus in the Enhanced Data Analysis program. Toxicological screening reports generated by these new macro files are in text mode or graphic mode and these reports can be generated with three different automated subtraction options. Text reports have Brief mode and Full mode and graphic reports have the option with or without mass spectrum mode. Matched mass spectrum and matching score for detected compounds are printed in reports by modified library searching modules. We have also developed an independent application program named DrugMan. This program manages drug groups, lists and parameters that are in use in MSD Chemstation. The incorporation of DrugMan with modified macro modules provides a powerful tool for toxicological screening and save a lot of valuable time on toxicological work. (c) 2010 Elsevier Ireland Ltd. All rights reserved.

Breast Cancer Risk Assessment SAS Macro (Gail Model)

Cancer.gov

A SAS macro (commonly referred to as the Gail Model) that projects absolute risk of invasive breast cancer according to NCI’s Breast Cancer Risk Assessment Tool (BCRAT) algorithm for specified race/ethnic groups and age intervals.

Some methodological issues in the longitudinal analysis of demographic data.

PubMed

Krishinan, P

1982-12-01

Most demographic data are macro (or aggregate) in nature. Some relevant methodological issues are presented here in a time series study using aggregate data. The micro-macro distinction is relative. Time enters into the micro and macro variables in different ways. A simple micro model of rural-urban migration is given. Method 1 is to assume homogeneity in behavior. Method 2 is a Bayesian estimation. A discusssion of the results follows. Time series models of aggregate data are given. The nature of the model--predictive or explanatory--must be decided on. Explanatory models in longitudinal studies have been developed. Ways to go to the micro level from the macro are discussed. The aggregation-disaggregation problem in demography is not similar to that in econometrics. To understand small populations, separate micro level data have to be collected and analyzed and appropriate models developed. Both types of models have their uses.

Exploring the links between macro-level contextual factors and their influence on nursing workforce composition.

PubMed

Squires, Allison; Beltrán-Sánchez, Hiram

2011-11-01

Research that links macro-level socioeconomic development variables to health care human resources workforce composition is scarce at best. The purpose of this study was to explore the links between nonnursing factors and nursing workforce composition through a secondary, descriptive analysis of year 2000, publicly available national nursing human resources data from Mexico. Building on previous research, the authors conducted multiple robust regression analysis by federal typing of nursing human resources from 31 Mexican states against macro-level socioeconomic development variables. Average education in a state was significantly associated in predicting all types of formally educated nurses in Mexico. Other results suggest that macro-level indicators have a different association with each type of nurse. Context may play a greater role in determining nursing workforce composition than previously thought. Further studies may help to explain differences both within and between countries.

Exploring the Links Between Macro-Level Contextual Factors and Their Influence on Nursing Workforce Composition

PubMed Central

Squires, Allison; Beltrán-Sánchez, Hiram

2012-01-01

Research that links macro-level socioeconomic development variables to healthcare human resources workforce composition is scarce at best. The purpose of this study was to explore the links between non-nursing factors and nursing workforce composition through a secondary, descriptive analysis of year 2000, publicly available national nursing human resources data from Mexico. Building on previous research, the authors conducted multiple robust regression analysis by federal typing of nursing human resources from 31 Mexican states against macro-level socioeconomic development variables. Average education in a state was significantly associated in predicting all types of formally educated nurses in Mexico. Other results suggest that macro level indicators have a different association with each type of nurse. Context may play a greater role in determining nursing workforce composition than previously thought. Further studies may help to explain differences both within and between countries. PMID:22513839

An Introduction to Macro- Level Spatial Nonstationarity: a Geographically Weighted Regression Analysis of Diabetes and Poverty

PubMed Central

Siordia, Carlos; Saenz, Joseph; Tom, Sarah E.

2014-01-01

Type II diabetes is a growing health problem in the United States. Understanding geographic variation in diabetes prevalence will inform where resources for management and prevention should be allocated. Investigations of the correlates of diabetes prevalence have largely ignored how spatial nonstationarity might play a role in the macro-level distribution of diabetes. This paper introduces the reader to the concept of spatial nonstationarity—variance in statistical relationships as a function of geographical location. Since spatial nonstationarity means different predictors can have varying effects on model outcomes, we make use of a geographically weighed regression to calculate correlates of diabetes as a function of geographic location. By doing so, we demonstrate an exploratory example in which the diabetes-poverty macro-level statistical relationship varies as a function of location. In particular, we provide evidence that when predicting macro-level diabetes prevalence, poverty is not always positively associated with diabetes PMID:25414731

Political democracy, economic liberalization, and macro-sociological models of intergenerational mobility.

PubMed

Gugushvili, Alexi

2017-08-01

Building on the previously investigated macro-sociological models which analyze the consequences of economic development, income inequality, and international migration on social mobility, this article studies the specific contextual covariates of intergenerational reproduction of occupational status in post-communist societies. It is theorized that social mobility is higher in societies with democratic political regimes and less liberalized economies. The outlined hypotheses are tested by using micro- and macro-level datasets for 21 post-communist societies which are fitted into multilevel mixed-effects linear regressions. The derived findings suggest that factors specific to transition societies, conventional macro-level variables, and the legacy of the Soviet Union explain variation in intergenerational social mobility, but the results vary depending which birth cohorts survey participants belong to and whether or not they stem from advantaged or disadvantaged social origins. These findings are robust to various alternative data, sample, and method specifications. Copyright © 2017 Elsevier Inc. All rights reserved.

Macro-/Micro-Controlled 3D Lithium-Ion Batteries via Additive Manufacturing and Electric Field Processing.

PubMed

Li, Jie; Liang, Xinhua; Liou, Frank; Park, Jonghyun

2018-01-30

This paper presents a new concept for making battery electrodes that can simultaneously control macro-/micro-structures and help address current energy storage technology gaps and future energy storage requirements. Modern batteries are fabricated in the form of laminated structures that are composed of randomly mixed constituent materials. This randomness in conventional methods can provide a possibility of developing new breakthrough processing techniques to build well-organized structures that can improve battery performance. In the proposed processing, an electric field (EF) controls the microstructures of manganese-based electrodes, while additive manufacturing controls macro-3D structures and the integration of both scales. The synergistic control of micro-/macro-structures is a novel concept in energy material processing that has considerable potential for providing unprecedented control of electrode structures, thereby enhancing performance. Electrochemical tests have shown that these new electrodes exhibit superior performance in their specific capacity, areal capacity, and life cycle.

Determination of macro-scale soil properties from pore-scale structures: model derivation.

PubMed

Daly, K R; Roose, T

2018-01-01

In this paper, we use homogenization to derive a set of macro-scale poro-elastic equations for soils composed of rigid solid particles, air-filled pore space and a poro-elastic mixed phase. We consider the derivation in the limit of large deformation and show that by solving representative problems on the micro-scale we can parametrize the macro-scale equations. To validate the homogenization procedure, we compare the predictions of the homogenized equations with those of the full equations for a range of different geometries and material properties. We show that the results differ by [Formula: see text] for all cases considered. The success of the homogenization scheme means that it can be used to determine the macro-scale poro-elastic properties of soils from the underlying structure. Hence, it will prove a valuable tool in both characterization and optimization.

Interspecies scaling and prediction of human clearance: comparison of small- and macro-molecule drugs

PubMed Central

Huh, Yeamin; Smith, David E.; Feng, Meihau Rose

2014-01-01

Human clearance prediction for small- and macro-molecule drugs was evaluated and compared using various scaling methods and statistical analysis.Human clearance is generally well predicted using single or multiple species simple allometry for macro- and small-molecule drugs excreted renally.The prediction error is higher for hepatically eliminated small-molecules using single or multiple species simple allometry scaling, and it appears that the prediction error is mainly associated with drugs with low hepatic extraction ratio (Eh). The error in human clearance prediction for hepatically eliminated small-molecules was reduced using scaling methods with a correction of maximum life span (MLP) or brain weight (BRW).Human clearance of both small- and macro-molecule drugs is well predicted using the monkey liver blood flow method. Predictions using liver blood flow from other species did not work as well, especially for the small-molecule drugs. PMID:21892879

The effect of the length of macro synthetic fibres on their performance in concrete

NASA Astrophysics Data System (ADS)

Juhász, K. P.; Kis, V.

2017-09-01

Nowadays macro synthetic fibres are able to compete with steel fibres despite their low Youngs Modulus. This is due to their different pull-out mechanism and a larger number of individual fibres per kilo compared to steel fibres. Macro synthetic fibres bond to the concrete along their full length, usually with an embossed surface, while steel fibres are mostly anchored by their hooked ends. If the bond is defined by the length of the embossed surface, logically the longer the synthetic fibre the higher post-crack capacity. In this paper the same type of macro synthetic fibre was researched with different lengths but at the same dosage. The consistency of the fresh concrete together with the quality of the distribution of the fibres have been analysed and compared with the residual strength. After analysing these data the optimum fibre length was able to be determined.

An Introduction to Macro- Level Spatial Nonstationarity: a Geographically Weighted Regression Analysis of Diabetes and Poverty.

PubMed

Siordia, Carlos; Saenz, Joseph; Tom, Sarah E

2012-01-01

Type II diabetes is a growing health problem in the United States. Understanding geographic variation in diabetes prevalence will inform where resources for management and prevention should be allocated. Investigations of the correlates of diabetes prevalence have largely ignored how spatial nonstationarity might play a role in the macro-level distribution of diabetes. This paper introduces the reader to the concept of spatial nonstationarity-variance in statistical relationships as a function of geographical location. Since spatial nonstationarity means different predictors can have varying effects on model outcomes, we make use of a geographically weighed regression to calculate correlates of diabetes as a function of geographic location. By doing so, we demonstrate an exploratory example in which the diabetes-poverty macro-level statistical relationship varies as a function of location. In particular, we provide evidence that when predicting macro-level diabetes prevalence, poverty is not always positively associated with diabetes.

Critique of Macro Flow/Damage Surface Representations for Metal Matrix Composites Using Micromechanics

NASA Technical Reports Server (NTRS)

Lissenden, Cliff J.; Arnold, Steven M.

1996-01-01

Guidance for the formulation of robust, multiaxial, constitutive models for advanced materials is provided by addressing theoretical and experimental issues using micromechanics. The multiaxial response of metal matrix composites, depicted in terms of macro flow/damage surfaces, is predicted at room and elevated temperatures using an analytical micromechanical model that includes viscoplastic matrix response as well as fiber-matrix debonding. Macro flow/damage surfaces (i.e., debonding envelopes, matrix threshold surfaces, macro 'yield' surfaces, surfaces of constant inelastic strain rate, and surfaces of constant dissipation rate) are determined for silicon carbide/titanium in three stress spaces. Residual stresses are shown to offset the centers of the flow/damage surfaces from the origin and their shape is significantly altered by debonding. The results indicate which type of flow/damage surfaces should be characterized and what loadings applied to provide the most meaningful experimental data for guiding theoretical model development and verification.

Macro-level gender equality and depression in men and women in Europe.

PubMed

Van de Velde, Sarah; Huijts, Tim; Bracke, Piet; Bambra, Clare

2013-06-01

A recurrent finding in international literature is a greater prevalence of depression in women than in men. While explanations for this gender gap have been studied extensively at the individual level, few researchers have studied macro-level determinants of depression in men and women. In the current study we aim to examine the micro-macro linkage of the relationship between gender equality and depression by gender in Europe, using data from the European Social Survey, 2006-2007 (N=39,891). Using a multilevel framework we find that a high degree of macro-level gender equality is related to lower levels of depression in both women and men. It is also related to a smaller gender difference in depression, but only for certain social subgroups and only for specific dimensions of gender equality. © 2013 The Authors. Sociology of Health & Illness © 2013 Foundation for the Sociology of Health & Illness/John Wiley & Sons Ltd.

Full complex spatial filtering with a phase mostly DMD. [Deformable Mirror Device

NASA Technical Reports Server (NTRS)

Florence, James M.; Juday, Richard D.

1991-01-01

A new technique for implementing fully complex spatial filters with a phase mostly deformable mirror device (DMD) light modulator is described. The technique combines two or more phase-modulating flexure-beam mirror elements into a single macro-pixel. By manipulating the relative phases of the individual sub-pixels within the macro-pixel, the amplitude and the phase can be independently set for this filtering element. The combination of DMD sub-pixels into a macro-pixel is accomplished by adjusting the optical system resolution, thereby trading off system space bandwidth product for increased filtering flexibility. Volume in the larger dimensioned space, space bandwidth-complex axes count, is conserved. Experimental results are presented mapping out the coupled amplitude and phase characteristics of the individual flexure-beam DMD elements and demonstrating the independent control of amplitude and phase in a combined macro-pixel. This technique is generally applicable for implementation with any type of phase modulating light modulator.

A Novel ImageJ Macro for Automated Cell Death Quantitation in the Retina

PubMed Central

Maidana, Daniel E.; Tsoka, Pavlina; Tian, Bo; Dib, Bernard; Matsumoto, Hidetaka; Kataoka, Keiko; Lin, Haijiang; Miller, Joan W.; Vavvas, Demetrios G.

2015-01-01

Purpose TUNEL assay is widely used to evaluate cell death. Quantification of TUNEL-positive (TUNEL+) cells in tissue sections is usually performed manually, ideally by two masked observers. This process is time consuming, prone to measurement errors, and not entirely reproducible. In this paper, we describe an automated quantification approach to address these difficulties. Methods We developed an ImageJ macro to quantitate cell death by TUNEL assay in retinal cross-section images. The script was coded using IJ1 programming language. To validate this tool, we selected a dataset of TUNEL assay digital images, calculated layer area and cell count manually (done by two observers), and compared measurements between observers and macro results. Results The automated macro segmented outer nuclear layer (ONL) and inner nuclear layer (INL) successfully. Automated TUNEL+ cell counts were in-between counts of inexperienced and experienced observers. The intraobserver coefficient of variation (COV) ranged from 13.09% to 25.20%. The COV between both observers was 51.11 ± 25.83% for the ONL and 56.07 ± 24.03% for the INL. Comparing observers' results with macro results, COV was 23.37 ± 15.97% for the ONL and 23.44 ± 18.56% for the INL. Conclusions We developed and validated an ImageJ macro that can be used as an accurate and precise quantitative tool for retina researchers to achieve repeatable, unbiased, fast, and accurate cell death quantitation. We believe that this standardized measurement tool could be advantageous to compare results across different research groups, as it is freely available as open source. PMID:26469755

Inter-level Scaffolding and Sequences of Representational Activities in Teaching a Chemical System with Graphical Simulations

NASA Astrophysics Data System (ADS)

Li, Na; Black, John B.

2016-10-01

Chemistry knowledge can be represented at macro-, micro- and symbolic levels, and learning a chemistry topic requires students to engage in multiple representational activities. This study focused on scaffolding for inter-level connection-making in learning chemistry knowledge with graphical simulations. We also tested whether different sequences of representational activities produced different student learning outcomes in learning a chemistry topic. A sample of 129 seventh graders participated in this study. In a simulation-based environment, participants completed three representational activities to learn several ideal gas law concepts. We conducted a 2 × 3 factorial design experiment. We compared two scaffolding conditions: (1) the inter- level scaffolding condition in which participants received inter-level questions and experienced the dynamic link function in the simulation-based environment and (2) the intra- level scaffolding condition in which participants received intra-level questions and did not experience the dynamic link function. We also compared three different sequences of representational activities: macro-symbolic-micro, micro-symbolic-macro and symbolic-micro-macro. For the scaffolding variable, we found that the inter- level scaffolding condition produced significantly better performance in both knowledge comprehension and application, compared to the intra- level scaffolding condition. For the sequence variable, we found that the macro-symbolic-micro sequence produced significantly better knowledge comprehension performance than the other two sequences; however, it did not benefit knowledge application performance. There was a trend that the treatment group who experienced inter- level scaffolding and the micro-symbolic-macro sequence achieved the best knowledge application performance.

Bringing consistency to simulation of population models--Poisson simulation as a bridge between micro and macro simulation.

PubMed

Gustafsson, Leif; Sternad, Mikael

2007-10-01

Population models concern collections of discrete entities such as atoms, cells, humans, animals, etc., where the focus is on the number of entities in a population. Because of the complexity of such models, simulation is usually needed to reproduce their complete dynamic and stochastic behaviour. Two main types of simulation models are used for different purposes, namely micro-simulation models, where each individual is described with its particular attributes and behaviour, and macro-simulation models based on stochastic differential equations, where the population is described in aggregated terms by the number of individuals in different states. Consistency between micro- and macro-models is a crucial but often neglected aspect. This paper demonstrates how the Poisson Simulation technique can be used to produce a population macro-model consistent with the corresponding micro-model. This is accomplished by defining Poisson Simulation in strictly mathematical terms as a series of Poisson processes that generate sequences of Poisson distributions with dynamically varying parameters. The method can be applied to any population model. It provides the unique stochastic and dynamic macro-model consistent with a correct micro-model. The paper also presents a general macro form for stochastic and dynamic population models. In an appendix Poisson Simulation is compared with Markov Simulation showing a number of advantages. Especially aggregation into state variables and aggregation of many events per time-step makes Poisson Simulation orders of magnitude faster than Markov Simulation. Furthermore, you can build and execute much larger and more complicated models with Poisson Simulation than is possible with the Markov approach.

Usual Dietary Intakes: SAS Macros for the NCI Method

Cancer.gov

SAS macros are currently available to facilitate modeling of a single dietary component, whether consumed daily or episodically; ratios of two dietary components that are consumed nearly every day; multiple dietary components, whether consumed daily or episodically.

Estimation of genetic variance for macro- and micro-environmental sensitivity using double hierarchical generalized linear models

PubMed Central

2013-01-01

Background Genetic variation for environmental sensitivity indicates that animals are genetically different in their response to environmental factors. Environmental factors are either identifiable (e.g. temperature) and called macro-environmental or unknown and called micro-environmental. The objectives of this study were to develop a statistical method to estimate genetic parameters for macro- and micro-environmental sensitivities simultaneously, to investigate bias and precision of resulting estimates of genetic parameters and to develop and evaluate use of Akaike’s information criterion using h-likelihood to select the best fitting model. Methods We assumed that genetic variation in macro- and micro-environmental sensitivities is expressed as genetic variance in the slope of a linear reaction norm and environmental variance, respectively. A reaction norm model to estimate genetic variance for macro-environmental sensitivity was combined with a structural model for residual variance to estimate genetic variance for micro-environmental sensitivity using a double hierarchical generalized linear model in ASReml. Akaike’s information criterion was constructed as model selection criterion using approximated h-likelihood. Populations of sires with large half-sib offspring groups were simulated to investigate bias and precision of estimated genetic parameters. Results Designs with 100 sires, each with at least 100 offspring, are required to have standard deviations of estimated variances lower than 50% of the true value. When the number of offspring increased, standard deviations of estimates across replicates decreased substantially, especially for genetic variances of macro- and micro-environmental sensitivities. Standard deviations of estimated genetic correlations across replicates were quite large (between 0.1 and 0.4), especially when sires had few offspring. Practically, no bias was observed for estimates of any of the parameters. Using Akaike’s information criterion the true genetic model was selected as the best statistical model in at least 90% of 100 replicates when the number of offspring per sire was 100. Application of the model to lactation milk yield in dairy cattle showed that genetic variance for micro- and macro-environmental sensitivities existed. Conclusion The algorithm and model selection criterion presented here can contribute to better understand genetic control of macro- and micro-environmental sensitivities. Designs or datasets should have at least 100 sires each with 100 offspring. PMID:23827014

DDGui, a new and fast way to analyse DRAGON and DONJON code results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chambon, R.; Marleau, G.

2012-07-01

With the largely increased performance of computer, the results from DRAGON and DONJON have increase in size and complexity. The scroll, copy and paste technique to get the result is not appropriate anymore. Many in-house script, software, macro have been developed to make the data gathering easier. However, the limit of these solutions is their specificity and the difficulty to export them from one place to another. A general tool usable and accessible by everyone was needed. The first bricks for a very fast and intuitive way to analyse the DRAGON and DONJON results have been put together in themore » graphic user interface DDGUI. Based on the extensive ROOT C++ package, the possible features are numerous. For this first version of the software, we have programmed the fundamental tools which may be the more useful on an everyday basis: view the data structures content, draw the geometry and draw the flux or power from a DONJON computation. The tests show how amazingly fast the user can get the information needed for a general overview or more precise analyses. Several other features will be implemented in the near feature. (authors)« less

Micromechanics Analysis Code Post-Processing (MACPOST) User Guide. 1.0

NASA Technical Reports Server (NTRS)

Goldberg, Robert K.; Comiskey, Michele D.; Bednarcyk, Brett A.

1999-01-01

As advanced composite materials have gained wider usage. the need for analytical models and computer codes to predict the thermomechanical deformation response of these materials has increased significantly. Recently, a micromechanics technique called the generalized method of cells (GMC) has been developed, which has the capability to fulfill this -oal. Tc provide a framework for GMC, the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC) has been developed. As MAC/GMC has been updated, significant improvements have been made to the post-processing capabilities of the code. Through the MACPOST program, which operates directly within the MSC/PATRAN graphical pre- and post-processing package, a direct link between the analysis capabilities of MAC/GMC and the post-processing capabilities of MSC/PATRAN has been established. MACPOST has simplified the production, printing. and exportation of results for unit cells analyzed by MAC/GMC. MACPOST allows different micro-level quantities to be plotted quickly and easily in contour plots. In addition, meaningful data for X-Y plots can be examined. MACPOST thus serves as an important analysis and visualization tool for the macro- and micro-level data generated by MAC/GMC. This report serves as the user's manual for the MACPOST program.

Surface Control of Cold Hibernated Elastic Memory Self-Deployable Structure

NASA Technical Reports Server (NTRS)

Sokolowski, Witold M.; Ghaffarian, Reza

2006-01-01

A new class of simple, reliable, lightweight, low packaging volume and cost, self-deployable structures has been developed for use in space and commercial applications. This technology called 'cold hibernated elastic memory' (CHEM) utilizes shape memory polymers (SMP)in open cellular (foam) structure or sandwich structures made of shape memory polymer foam cores and polymeric composite skins. Some of many potential CHEM space applications require a high precision deployment and surface accuracy during operation. However, a CHEM structure could be slightly distorted by the thermo-mechanical processing as well as by thermal space environment Therefore, the sensor system is desirable to monitor and correct the potential surface imperfection. During these studies, the surface control of CHEM smart structures was demonstrated using a Macro-Fiber Composite (MFC) actuator developed by the NASA LaRC and US Army ARL. The test results indicate that the MFC actuator performed well before and after processing cycles. It reduced some residue compressive strain that in turn corrected very small shape distortion after each processing cycle. The integrated precision strain gages were detecting only a small flat shape imperfection indicating a good recoverability of original shape of the CHEM test structure.

INVASIVE GRASS ALTERS LITTER DECOMPOSITION BY INFLUENCING MACRO-DETRITIVORES

EPA Science Inventory

Nitrogen fertilization experiments have produced results with inconsistent rates of plant litter decomposition, a phenomenon that may be explained if the influence of animal detritivores (macro-detritivores) on litter mass loss is greater than that of microbial decomposers whose ...

Macro Analysis Tool - MAT

EPA Science Inventory

This product is an easy-to-use Excel-based macro analysis tool (MAT) for performing comparisons of air sensor data with reference data and interpreting the results. This tool tackles one of the biggest hurdles in citizen-led community air monitoring projects – working with ...

Results Of Initial Analyses Of The Salt (Macro) Batch 9 Tank 21H Qualification Samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T.

2015-10-08

Savannah River National Laboratory (SRNL) analyzed samples from Tank 21H in support of qualification of Interim Salt Disposition Project (ISDP) Salt (Macro) Batch 9 for processing through the Actinide Removal Process (ARP) and the Modular Caustic-Side Solvent Extraction Unit (MCU). This document reports the initial results of the analyses of samples of Tank 21H. Analysis of the Tank 21H Salt (Macro) Batch 9 composite sample indicates that the material does not display any unusual characteristics. Further results on the chemistry and other tests will be issued in the future.

Financing health development projects: some macro-economic considerations.

PubMed

Sorkin, A L

1986-01-01

The paper briefly discusses the importance of macro-economic policy in health sector financing. The ways in which monetary and fiscal policy (macro-economic policy) affect interest rates, price levels and aggregate output are presented. The main portion of the paper considers a variety of methods for public financing of health and development projects. These approaches are analyzed in light of distributional and efficiency considerations. One way of increasing health sector resources is through reallocation from other sectors of the economy. The potential for redistribution from the defense to the health service industry is briefly considered.

Condition assessment of reinforced concrete beams using dynamic data measured with distributed long-gage macro-strain sensors

NASA Astrophysics Data System (ADS)

Hong, W.; Wu, Z. S.; Yang, C. Q.; Wan, C. F.; Wu, G.; Zhang, Y. F.

2012-06-01

A new condition assessment strategy of reinforced concrete (RC) beams is proposed in this paper. This strategy is based on frequency analysis of the dynamic data measured with distributed long-gage macro-stain sensors. After extracting modal macro-strain, the reference-based damage index is theoretically deducted in which the variations of modal flexural rigidity and modal neutral axis height are considered. The reference-free damage index is also presented for comparison. Both finite element simulation and experiment investigations were carried out to verify the proposed method. The manufacturing procedure of long-gage fiber Bragg grating (FBG) sensor chosen in the experiment is firstly presented, followed by an experimental study on the essential sensing properties of the long-gage macro-strain sensors and the results verify the excellent sensing properties, in particular the measurement accuracy and dynamic measuring capacity. Modal analysis results of a concrete beam show that the damage appearing in the beam can be well identified by the damage index while the vibration testing results of a RC beam show that the proposed method can not only capture small crack initiation but its propagation. It can be concluded that distributed long-gage dynamic macro-strain sensing technique has great potential for the condition assessment of RC structures subjected to dynamic loading.

Constraints on genes shape long-term conservation of macro-synteny in metazoan genomes.

PubMed

Lv, Jie; Havlak, Paul; Putnam, Nicholas H

2011-10-05

Many metazoan genomes conserve chromosome-scale gene linkage relationships ("macro-synteny") from the common ancestor of multicellular animal life 1234, but the biological explanation for this conservation is still unknown. Double cut and join (DCJ) is a simple, well-studied model of neutral genome evolution amenable to both simulation and mathematical analysis 5, but as we show here, it is not sufficent to explain long-term macro-synteny conservation. We examine a family of simple (one-parameter) extensions of DCJ to identify models and choices of parameters consistent with the levels of macro- and micro-synteny conservation observed among animal genomes. Our software implements a flexible strategy for incorporating genomic context into the DCJ model to incorporate various types of genomic context ("DCJ-[C]"), and is available as open source software from http://github.com/putnamlab/dcj-c. A simple model of genome evolution, in which DCJ moves are allowed only if they maintain chromosomal linkage among a set of constrained genes, can simultaneously account for the level of macro-synteny conservation and for correlated conservation among multiple pairs of species. Simulations under this model indicate that a constraint on approximately 7% of metazoan genes is sufficient to constrain genome rearrangement to an average rate of 25 inversions and 1.7 translocations per million years.

Intercalation and structural aspects of macroRAFT agents into MgAl layered double hydroxides.

PubMed

Kostadinova, Dessislava; Cenacchi Pereira, Ana; Lansalot, Muriel; D'Agosto, Franck; Bourgeat-Lami, Elodie; Leroux, Fabrice; Taviot-Guého, Christine; Cadars, Sylvian; Prevot, Vanessa

2016-01-01

Increasing attention has been devoted to the design of layered double hydroxide (LDH)-based hybrid materials. In this work, we demonstrate the intercalation by anion exchange process of poly(acrylic acid) (PAA) and three different hydrophilic random copolymers of acrylic acid (AA) and n -butyl acrylate (BA) with molar masses ranging from 2000 to 4200 g mol -1 synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization, into LDH containing magnesium(II) and aluminium(III) intralayer cations and nitrates as counterions (MgAl-NO 3 LDH). At basic pH, the copolymer chains (macroRAFT agents) carry negative charges which allowed the establishment of electrostatic interactions with the LDH interlayer and their intercalation. The resulting hybrid macroRAFT/LDH materials displayed an expanded interlamellar domain compared to pristine MgAl-NO 3 LDH from 1.36 nm to 2.33 nm. Depending on the nature of the units involved into the macroRAFT copolymer (only AA or AA and BA), the intercalation led to monolayer or bilayer arrangements within the interlayer space. The macroRAFT intercalation and the molecular structure of the hybrid phases were further characterized by Fourier transform infrared (FTIR) and solid-state 13 C, 1 H and 27 Al nuclear magnetic resonance (NMR) spectroscopies to get a better description of the local structure.

A macro perspective for client-centred practice in curricula: Critique and teaching methods.

PubMed

Fleming-Castaldy, Rita P

2015-07-01

Client-centred practice is often eclipsed by social, economic, and political inequities. Ignoring these realities obstructs clients' goal attainment. The author advocates for the integration of a macro perspective inclusive of participation barriers and supports in occupational therapy curricula and seeks to motivate educators to adopt teaching approaches that develop students' abilities to address the complexities of client-centred practice. This article integrates a critical analysis of the literature on client-centred practice with reflexivity on disability studies and autoethnography. Educational standards require students to learn about the social, economic, and political contexts that impact on client-centred practice and the need for advocacy to enable participation. Theoretical support of a macro perspective for client-centred practice is strongly evident in the literature. Information on methods for teaching students how to actualize these concepts in practice is scant. Thus, strategies to inform the integration of a macro perspective into curricula and concrete activities to develop students' competencies for empowered client-centred practice are required. Educators have an ethical responsibility to critique their pedagogy to determine whether they are adequately preparing students for client-centred practice. The focus must move from teaching a micro perspective of client-centred practice to a macro perspective that enables occupational justice and empowerment.

Nano- and Macro-wear of Bio-carbo-nitrided AISI 8620 Steel Surfaces

NASA Astrophysics Data System (ADS)

Arthur, Emmanuel Kwesi; Ampaw, Edward; Zebaze Kana, M. G.; Adetunji, A. R.; Olusunle, S. O. O.; Adewoye, O. O.; Soboyejo, W. O.

2015-12-01

This paper presents the results of an experimental study of nano- and macro-scale wear in a carbo-nitrided AISI 8620 steel. Carbo-nitriding is carried out using a novel method that involves the use of dried, cyanide-containing cassava leaves, as sources of carbon and nitrogen. These are used in a pack cementation that is used to diffuse carbon and nitrogen into case layers at intermediate temperatures [673.15 K, 723.15 K, 773.15 K, and 823.15 K (400 °C, 450 °C, 500 °C, and 550 °C)]. Nano- and macro-scale wear properties are studied in the case-hardened surfaces, using a combination of nano-scratch and pin-on-disk experiments. The measured wear volumes (at both nano- and macro-length scales) are shown to increase with decreasing pack cyaniding temperature. The nano- and macro-wear resistances are also shown to be enhanced by the in situ diffusion of carbon and nitrogen from cyanide-containing bio-processed waste. The underlying wear mechanisms are also elucidated via atomic force microscopy and scanning electron microscopy observations of the wear tracks. The implications of the results are discussed for the design of hardened carbo-nitrided steel surfaces with improved wear resistance.

Design of refrigeration system using refrigerant R134a for macro compartment

NASA Astrophysics Data System (ADS)

Rani, M. F. H.; Razlan, Z. M.; Shahriman, A. B.; Yong, C. K.; Harun, A.; Hashim, M. S. M.; Faizi, M. K.; Ibrahim, I.; Kamarrudin, N. S.; Saad, M. A. M.; Zunaidi, I.; Wan, W. K.; Desa, H.

2017-10-01

The main objective of this study is to analyse and design an optimum cooling system for macro compartment. Current product of the refrigerator is not specified for single function and not compact in size. Hence, a refrigeration system using refrigerant R134a is aimed to provide instant cooling in a macro compartment with sizing about 150 × 150 × 250 mm. The macro compartment is purposely designed to fit a bottle or drink can, which is then cooled to a desired drinking temperature of about 8°C within a period of 1 minute. The study is not only concerned with analysing of heat load of the macro compartment containing drink can, but also focused on determining suitable heat exchanger volume for both evaporator and condenser, calculating compressor displacement value and computing suitable resistance value of the expansion valve. Method of optimization is used to obtain the best solution of the problem. Mollier diagram is necessary in the process of developing the refrigeration system. Selection of blower is made properly to allow air circulation and to increase the flow rate for higher heat transfer rate. Property data are taken precisely from thermodynamic property tables. As the main four components, namely condenser, compressor, evaporator and expansion valve are fully developed, the refrigeration system is complete.

Synchronized motion control and precision positioning compensation of a 3-DOFs macro-micro parallel manipulator fully actuated by piezoelectric actuators

NASA Astrophysics Data System (ADS)

Zhang, Quan; Li, Chaodong; Zhang, Jiantao; Zhang, Xu

2017-11-01

The macro-micro combined approach, as an effective way to realize trans-scale nano-precision positioning with multi-dimensions and high velocity, plays a significant role in integrated circuit manufacturing field. A 3-degree-of-freedoms (3-DOFs) macro-micro manipulator is designed and analyzed to compromise the conflictions among the large stroke, high precision and multi-DOFs. The macro manipulator is a 3-Prismatic-Revolute-Revolute (3-PRR) structure parallel manipulator which is driven by three linear ultrasonic motors. The dynamic model and the cross-coupling error based synchronized motion controller of the 3-PRR parallel manipulator are theoretical analyzed and experimental tested. To further improve the positioning accuracy, a 3-DOFs monolithic compliant manipulator actuated by three piezoelectric stack actuators is designed. Then a multilayer BP neural network based inverse kinematic model identifier is developed to perform the positioning control. Finally, by forming the macro-micro structure, the dual stage manipulator successfully achieved the positioning task from the point (2 mm, 2 mm, 0 rad) back to the original point (0 mm, 0 mm, 0 rad) with the translation errors in X and Y directions less than ±50 nm and the rotation error around Z axis less than ±1 μrad, respectively.

Soil aggregate mediates the impacts of land uses on organic carbon, total nitrogen, and microbial activity in a Karst ecosystem

NASA Astrophysics Data System (ADS)

Xiao, Shuangshuang; Zhang, Wei; Ye, Yingying; Zhao, Jie; Wang, Kelin

2017-02-01

Understanding the effect of land use on soil carbon, nitrogen, and microbial activity associated with aggregates is critical for thorough comprehension of the C and N dynamics of karst landscapes/ecosystems. We monitored soil organic carbon (SOC), total nitrogen (TN), microbial biomass carbon (MBC), and Cmic: Corg ratio in large macro- (>2 mm), small macro- (0.25-2 mm), and micro- (0.053-0.25 mm) aggregates to determine the changes in soil properties under different land uses in the karst area of Southwest China. Five common land-use types—enclosure land (natural system, control), prescribed-burning land, fuel-wood shrubland, pasture and maize fields—were selected. Results showed that pasture and maize fields remarkably decreased the SOC and TN concentrations in aggregates. Conversion of natural system to other land uses decreased MBC (except for prescribed-burning) and increased Cmic: Corg ratios in aggregates. The extent of the response to land uses of SOC and TN concentrations was similar whereas that of MBC and Cmic: Corg ratios differed across the three aggregate sizes. Further, the SOC concentrations were significantly higher in macro-aggregates than micro-aggregates; the MBC and Cmic: Corg ratios were highest in small macro-aggregates. Therefore, small macro-aggregates might have more active C dynamics.

Some surprising manifestations of charged particle dynamics in a magnetic field

NASA Astrophysics Data System (ADS)

Varma, Ram K.

2010-08-01

We present here some very unusual experimental results on the dynamics of charged particle in a magnetic field which cannot be comprehended in terms of the Lorentz dynamics regarded, as per the current conceptual framework, as the appropriate one for the macro-scale description. Astonishingly, these results have been shown to be manifestations of a novel macro-scale quantum structure, designated as ‘transition amplitude wave’ (TAW), riding with the guiding centre trajectory, which is generated in the latter trajectory in consequence of the scattering of the particle with a fixed scattering centre. One set of observed results is thus identified as matter wave interference effects on the macro-scale attributable to this entity. The other enigmatic observation demonstrates the detection of a curl-free magnetic vector potential on the macro-scale, which is also shown to be a consequence of the TAW embedded in the Lorentz trajectory. These enigmatic results thus point to the unravelling of a new concept of a ‘dressed’ Lorentz trajectory—dressed with the TAW—accountable for these results, as against the ‘bare’ trajectory. These results and the formalism which enables one to comprehend them have led to the emergence of a new class of phenomena which display quantum properties on the macro-scale.

Large motor units are selectively affected following a stroke.

PubMed

Lukács, M; Vécsei, L; Beniczky, S

2008-11-01

Previous studies have revealed a loss of functioning motor units in stroke patients. However, it remained unclear whether the motor units are affected randomly or in some specific pattern. We assessed whether there is a selective loss of the large (high recruitment threshold) or the small (low recruitment threshold) motor units following a stroke. Forty-five stroke patients and 40 healthy controls participated in the study. Macro-EMG was recorded from the abductor digiti minimi muscle at two levels of force output (low and high). The median macro motor unit potential (macro-MUP) amplitude on the paretic side was compared with those on the unaffected side and in the controls. In the control group and on the unaffected side, the macro-MUPs were significantly larger at the high force output than at the low one. However, on the paretic side the macro-MUPs at the high force output had the same amplitude as those recorded at the low force output. These changes correlated with the severity of the paresis. Following a stroke, there is a selective functional loss of the large, high-threshold motor units. These changes are related to the severity of the symptoms. Our findings furnish further insight into the pathophysiology of the motor deficit following a stroke.

Micro vs Macro Planning: Achieving a Balance.

ERIC Educational Resources Information Center

Slate, Judith J.; Gallagher, Jo D.

1994-01-01

The process of developing program evaluation models for Florida International University's college of education is described. One lesson learned was that a combination of macro- and microlevel planning is necessary for purposeful evaluation. A grid to aid decision making is also presented. (Author/MSE)

Climate Change and Macro-Economic Cycles in Pre-Industrial Europe

PubMed Central

Pei, Qing; Zhang, David D.; Lee, Harry F.; Li, Guodong

2014-01-01

Climate change has been proven to be the ultimate cause of social crisis in pre-industrial Europe at a large scale. However, detailed analyses on climate change and macro-economic cycles in the pre-industrial era remain lacking, especially within different temporal scales. Therefore, fine-grained, paleo-climate, and economic data were employed with statistical methods to quantitatively assess the relations between climate change and agrarian economy in Europe during AD 1500 to 1800. In the study, the Butterworth filter was adopted to filter the data series into a long-term trend (low-frequency) and short-term fluctuations (high-frequency). Granger Causality Analysis was conducted to scrutinize the associations between climate change and macro-economic cycle at different frequency bands. Based on quantitative results, climate change can only show significant effects on the macro-economic cycle within the long-term. In terms of the short-term effects, society can relieve the influences from climate variations by social adaptation methods and self-adjustment mechanism. On a large spatial scale, temperature holds higher importance for the European agrarian economy than precipitation. By examining the supply-demand mechanism in the grain market, population during the study period acted as the producer in the long term, whereas as the consumer in the short term. These findings merely reflect the general interactions between climate change and macro-economic cycles at the large spatial region with a long-term study period. The findings neither illustrate individual incidents that can temporarily distort the agrarian economy nor explain some specific cases. In the study, the scale thinking in the analysis is raised as an essential methodological issue for the first time to interpret the associations between climatic impact and macro-economy in the past agrarian society within different temporal scales. PMID:24516601

Climate change and macro-economic cycles in pre-industrial europe.

PubMed

Pei, Qing; Zhang, David D; Lee, Harry F; Li, Guodong

2014-01-01

Climate change has been proven to be the ultimate cause of social crisis in pre-industrial Europe at a large scale. However, detailed analyses on climate change and macro-economic cycles in the pre-industrial era remain lacking, especially within different temporal scales. Therefore, fine-grained, paleo-climate, and economic data were employed with statistical methods to quantitatively assess the relations between climate change and agrarian economy in Europe during AD 1500 to 1800. In the study, the Butterworth filter was adopted to filter the data series into a long-term trend (low-frequency) and short-term fluctuations (high-frequency). Granger Causality Analysis was conducted to scrutinize the associations between climate change and macro-economic cycle at different frequency bands. Based on quantitative results, climate change can only show significant effects on the macro-economic cycle within the long-term. In terms of the short-term effects, society can relieve the influences from climate variations by social adaptation methods and self-adjustment mechanism. On a large spatial scale, temperature holds higher importance for the European agrarian economy than precipitation. By examining the supply-demand mechanism in the grain market, population during the study period acted as the producer in the long term, whereas as the consumer in the short term. These findings merely reflect the general interactions between climate change and macro-economic cycles at the large spatial region with a long-term study period. The findings neither illustrate individual incidents that can temporarily distort the agrarian economy nor explain some specific cases. In the study, the scale thinking in the analysis is raised as an essential methodological issue for the first time to interpret the associations between climatic impact and macro-economy in the past agrarian society within different temporal scales.

Selective ablation of rabbit atherosclerotic plaque with less thermal effect by the control of pulse structure of a quantum cascade laser in the 5.7 μm wavelength range

NASA Astrophysics Data System (ADS)

Hashimura, Keisuke; Ishii, Katsunori; Awazu, Kunio

2016-03-01

Cholesteryl esters are main components of atherosclerotic plaques and have an absorption peak at the wavelength of 5.75 μm originated from C=O stretching vibration mode of ester bond. Our group achieved the selective ablation of atherosclerotic lesions using a quantum cascade laser (QCL) in the 5.7 μm wavelength range. QCLs are relatively new types of semiconductor lasers that can emit mid-infrared range. They are sufficiently compact and considered to be useful for clinical application. However, large thermal effects were observed because the QCL worked as quasicontinuous wave (CW) lasers due to its short pulse interval. Then we tried macro pulse irradiation (irradiation of pulses at intervals) of the QCL and achieved effective ablation with less-thermal effects than conventional quasi-CW irradiation. However, lesion selectivity might be changed by changing pulse structure. Therefore, in this study, irradiation effects of the macro pulse irradiation to rabbit atherosclerotic plaque and normal vessel were compared. The macro pulse width and the macro pulse interval were set to 0.5 and 12 ms, respectively, because the thermal relaxation time of rabbit normal and atherosclerotic aortas in the oscillation wavelength of the QCL was 0.5-12 ms. As a result, cutting difference was achieved between rabbit atherosclerotic and normal aortas by the macro pulse irradiation. Therefore, macro pulse irradiation of a QCL in the 5.7 μm wavelength range is effective for reducing thermal effects and selective ablation of the atherosclerotic plaque. QCLs have the potential of realizing less-invasive laser angioplasty.

Trend in coral-algal phase shift in the Mandapam group of islands, Gulf of Mannar Marine Biosphere Reserve, India

NASA Astrophysics Data System (ADS)

Machendiranathan, M.; Senthilnathan, L.; Ranith, R.; Saravanakumar, A.; Thangaradjou, T.; Choudhry, S. B.; Sasamal, S. K.

2016-12-01

The present study revealed proliferation of macro-algae modifying coral reef ecosystems in a different manner due to diseases and sedimentations in the Mandapam group of islands in the Gulf of Mannar. Benthic surveys were conducted with major attack of seven coral reefs diseases with high sedimentation rate, nine species of fleshy macro-algae ( Turbinaria ornata, Turbinaria conaides, Caulerpa scalpelliformis, Caulerpa racemosa, Kappaphycus alvarezii, Padina gymnosphora, Sargassum wightii, Ulva reticulata and Calurpa lentillifera) proliferation against major corals life forms (Acropora branching, Acropora digitate, Acropora tabulate, coral massive, coral submassive, coral foliose and coral encrusting). The results confirm that diseased corals most favor to macro-algae growth (15.27%) rather than the sedimentation covered corals (8.24 %). In the degradation of coral life forms, massive corals were more highly damaged (7.05%) than any other forms. Within a short period of time (May to September), coral coverage shrank to 17.4% from 21.9%, macro-algae increased 23.51% and the average sedimentation rate attained 77.52 mg cm-2d-1 with persisting coral reef diseases of 17.59%. The Pearson correlation showed that the coral cover decreased with increasing macro-algae growth, which was statistically significant ( r = -0.774, n = 100, P < 0.0005). The proliferation of the various macro-algae C. scalpellifrmis, T. ornata, C. racemosa, T. conaides, U. reticulata, S. wightii, K. alvarezii, P. gymnosphora and C. lentillifera increased with percentages of 6.0, 5.8, 5.7, 4.9, 4.2, 3.7, 2.7 and 1.9, respectively. If this trend continues, the next generation of new recruit corals will undoubtedly lead to a phase shift in Gulf of Mannar corals.

EEsoF MICAD and ACADEMY macro files for coplanar waveguide and finite ground plan coplanar waveguide

NASA Technical Reports Server (NTRS)

Ponchak, George E.

1995-01-01

A collection of macro files is presented which when appended to either the EEsoF MICAD.ELE or EEsoF ACADEMY.ELE file permits the layout of coplanar waveguide and finite ground plane coplanar waveguide circuits.

A new macro model of traffic flow by incorporating both timid and aggressive driving behaviors

NASA Astrophysics Data System (ADS)

Peng, Guanghan; Qing, Li

2016-10-01

In this paper, a novel macro model is derived from car-following model by applying the relationship between the micro and macro variables by incorporating the timid and aggressive effects of optimal velocity on a single lane. Numerical simulation shows that the timid and aggressive macro model of traffic flow can correctly reproduce common evolution of shock, rarefaction waves and local cluster effects under small perturbation. Also, the results uncover that the aggressive effect can smoothen the front of the shock wave and the timid effect results in local press peak, which means that the timid effect hastens the process of congregation in the shock wave. The more timid traffic behaviors are, the smaller is the stable range. Furthermore, the research shows that the advantage of the aggressive effect over the timid one lies in the fact that the aggressive traffic behaviors can improve the stability of traffic flow with the consideration of incorporating timid and aggressive driving behaviors at the same time.

Relationship of Interplanetary Shock Micro and Macro Characteristics: A Wind Study

NASA Technical Reports Server (NTRS)

Szabo, Adam; Koval, A

2008-01-01

The non-linear least squared MHD fitting technique of Szabo 11 9941 has been recently further refined to provide realistic confidence regions for interplanetary shock normal directions and speeds. Analyzing Wind observed interplanetary shocks from 1995 to 200 1, macro characteristics such as shock strength, Theta Bn and Mach numbers can be compared to the details of shock micro or kinetic structures. The now commonly available very high time resolution (1 1 or 22 vectors/sec) Wind magnetic field data allows the precise characterization of shock kinetic structures, such as the size of the foot, ramp, overshoot and the duration of damped oscillations on either side of the shock. Detailed comparison of the shock micro and macro characteristics will be given. This enables the elucidation of shock kinetic features, relevant for particle energization processes, for observations where high time resolution data is not available. Moreover, establishing a quantitative relationship between the shock micro and macro structures will improve the confidence level of shock fitting techniques during disturbed solar wind conditions.

Micro and MACRO Fractals Generated by Multi-Valued Dynamical Systems

NASA Astrophysics Data System (ADS)

Banakh, T.; Novosad, N.

2014-08-01

Given a multi-valued function Φ : X \\mumap X on a topological space X we study the properties of its fixed fractal \\malteseΦ, which is defined as the closure of the orbit Φω(*Φ) = ⋃n∈ωΦn(*Φ) of the set *Φ = {x ∈ X : x ∈ Φ(x)} of fixed points of Φ. A special attention is paid to the duality between micro-fractals and macro-fractals, which are fixed fractals \\maltese Φ and \\maltese {Φ -1} for a contracting compact-valued function Φ : X \\mumap X on a complete metric space X. With help of algorithms (described in this paper) we generate various images of macro-fractals which are dual to some well-known micro-fractals like the fractal cross, the Sierpiński triangle, Sierpiński carpet, the Koch curve, or the fractal snowflakes. The obtained images show that macro-fractals have a large-scale fractal structure, which becomes clearly visible after a suitable zooming.

A quantification of the standing stock of macro-debris in Majuro lagoon and its effect on hard coral communities.

PubMed

Richards, Zoe T; Beger, Maria

2011-08-01

The accumulation of debris is an insidious problem throughout the world's oceans. Here we document 234.24 items of macro-debris/km2 in the shallow populated parts of Majuro lagoon (Republic of the Marshall Islands) which is the second highest standing stock of macro-debris recorded to date in any benthic marine habitat in the world. The majority of macro-debris was from household sources (78.7%) with the peak abundance recorded in areas of medium affluence. Marine debris causes suffocation, shading, tissue abrasion and mortality of corals and we show a significant negative correlation exists between the level of hard coral cover and coverage of marine debris. Given long decomposition times, even if the input of rubbish to Majuro lagoon is stopped immediately, the standing stock of debris will persist for centuries. Multiple new initiatives are needed to curtail the direct and indirect dumping of waste in Majuro lagoon. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Cryopreservation of human insulin expressing cells macro-encapsulated in a durable therapeutic immunoisolating device theracyte.

PubMed

Yakhnenko, Ilya; Wong, Wallace K; Katkov, Igor I; Itkin-Ansari, Pamela

2012-01-01

Encapsulating insulin producing cells (INPCs) in an immunoisolation device have been shown to cure diabetes in rodents without the need for immunosuppression. However, micro-encapsulation in semi-solid gels raises longevity and safety concerns for future use of stem cell derived INPCs. We have focused on a durable and retrievable macro-encapsulation (> 10(6) cells) device (TheraCyte). Cryopreservation (CP) of cells preloaded into the device is highly desirable but may require prolonged exposure to cryoprotectants during loading and post-thaw manipulations. Here, we are reporting survival and function of a human islet cell line frozen as single cells or as islet-like cell clusters. The non-clusterized cells exhibited high cryosurvival after prolonged pre-freeze or post-thaw exposure to 10 percent DMSO. However, both clusterization and especially loading INPCs into the device reduced viable yield even without CP. The survived cryopreserved macro-encapsulated INPCs remained fully functional suggesting that CP of macro-encapsulated cells is a promising tool for cell based therapies.

Variation in Macro and Trace Elements in Progression of Type 2 Diabetes

PubMed Central

2014-01-01

Macro elements are the minerals of which the body needs more amounts and are more important than any other elements. Trace elements constitute a minute part of the living tissues and have various metabolic characteristics and functions. Trace elements participate in tissue and cellular and subcellular functions; these include immune regulation by humoral and cellular mechanisms, nerve conduction, muscle contractions, membrane potential regulations, and mitochondrial activity and enzyme reactions. The status of micronutrients such as iron and vanadium is higher in type 2 diabetes. The calcium, magnesium, sodium, chromium, cobalt, iodine, iron, selenium, manganese, and zinc seem to be low in type 2 diabetes while elements such as potassium and copper have no effect. In this review, we emphasized the status of macro and trace elements in type 2 diabetes and its advantages or disadvantages; this helps to understand the mechanism, progression, and prevention of type 2 diabetes due to the lack and deficiency of different macro and trace elements. PMID:25162051

Analysis of Macro-micro Simulation Models for Service-Oriented Public Platform: Coordination of Networked Services and Measurement of Public Values

NASA Astrophysics Data System (ADS)

Kinoshita, Yumiko

When service sectors are a major driver for the growth of the world economy, we are challenged to implement service-oriented infrastructure as e-Gov platform to achieve further growth and innovation for both developed and developing countries. According to recent trends in service industry, it is clarified that main factors for the growth of service sectors are investment into knowledge, trade, and the enhanced capacity of micro, small, and medium-sized enterprises (MSMEs). In addition, the design and deployment of public service platform require appropriate evaluation methodology. Reflecting these observations, this paper proposes macro-micro simulation approach to assess public values (PV) focusing on MSMEs. Linkage aggregate variables (LAVs) are defined to show connection between macro and micro impacts of public services. As a result, the relationship of demography, business environment, macro economy, and socio-economic impact are clarified and their values are quantified from the behavioral perspectives of citizens and firms.

Macro-SICM: A Scanning Ion Conductance Microscope for Large-Range Imaging.

PubMed

Schierbaum, Nicolas; Hack, Martin; Betz, Oliver; Schäffer, Tilman E

2018-04-17

The scanning ion conductance microscope (SICM) is a versatile, high-resolution imaging technique that uses an electrolyte-filled nanopipet as a probe. Its noncontact imaging principle makes the SICM uniquely suited for the investigation of soft and delicate surface structures in a liquid environment. The SICM has found an ever-increasing number of applications in chemistry, physics, and biology. However, a drawback of conventional SICMs is their relatively small scan range (typically 100 μm × 100 μm in the lateral and 10 μm in the vertical direction). We have developed a Macro-SICM with an exceedingly large scan range of 25 mm × 25 mm in the lateral and 0.25 mm in the vertical direction. We demonstrate the high versatility of the Macro-SICM by imaging at different length scales: from centimeters (fingerprint, coin) to millimeters (bovine tongue tissue, insect wing) to micrometers (cellular extensions). We applied the Macro-SICM to the study of collective cell migration in epithelial wound healing.

Mapping coastal marine debris using aerial imagery and spatial analysis.

PubMed

Moy, Kirsten; Neilson, Brian; Chung, Anne; Meadows, Amber; Castrence, Miguel; Ambagis, Stephen; Davidson, Kristine

2017-12-19

This study is the first to systematically quantify, categorize, and map marine macro-debris across the main Hawaiian Islands (MHI), including remote areas (e.g., Niihau, Kahoolawe, and northern Molokai). Aerial surveys were conducted over each island to collect high resolution photos, which were processed into orthorectified imagery and visually analyzed in GIS. The technique provided precise measurements of the quantity, location, type, and size of macro-debris (>0.05m 2 ), identifying 20,658 total debris items. Northeastern (windward) shorelines had the highest density of debris. Plastics, including nets, lines, buoys, floats, and foam, comprised 83% of the total count. In addition, the study located six vessels from the 2011 Tōhoku tsunami. These results created a baseline of the location, distribution, and composition of marine macro-debris across the MHI. Resource managers and communities may target high priority areas, particularly along remote coastlines where macro-debris counts were largely undocumented. Copyright © 2017 Elsevier Ltd. All rights reserved.

An EXCEL macro for importing log ASCII standard (LAS) files into EXCEL worksheets

NASA Astrophysics Data System (ADS)

Özkaya, Sait Ismail

1996-02-01

An EXCEL 5.0 macro is presented for converting a LAS text file into an EXCEL worksheet. Although EXCEL has commands for importing text files and parsing text lines, LAS files must be decoded line-by-line because three different delimiters are used to separate fields of differing length. The macro is intended to eliminate manual decoding of LAS version 2.0. LAS is a floppy disk format for storage and transfer of log data as text files. LAS was proposed by the Canadian Well Logging Society. The present EXCEL macro decodes different sections of a LAS file, separates, and places the fields into different columns of an EXCEL worksheet. To import a LAS file into EXCEL without errors, the file must not contain any unrecognized symbols, and the data section must be the last section. The program does not check for the presence of mandatory sections or fields as required by LAS rules. Once a file is incorporated into EXCEL, mandatory sections and fields may be inspected visually.

Evaluation of Isoprene Chain Extension from PEO Macromolecular Chain Transfer Agents for the Preparation of Dual, Invertible Block Copolymer Nanoassemblies.

PubMed

Bartels, Jeremy W; Cauët, Solène I; Billings, Peter L; Lin, Lily Yun; Zhu, Jiahua; Fidge, Christopher; Pochan, Darrin J; Wooley, Karen L

2010-09-14

Two RAFT-capable PEO macro-CTAs, 2 and 5 kDa, were prepared and used for the polymerization of isoprene which yielded well-defined block copolymers of varied lengths and compositions. GPC analysis of the PEO macro-CTAs and block copolymers showed remaining unreacted PEO macro-CTA. Mathematical deconvolution of the GPC chromatograms allowed for the estimation of the blocking efficiency, about 50% for the 5 kDa PEO macro-CTA and 64% for the 2 kDa CTA. Self assembly of the block copolymers in both water and decane was investigated and the resulting regular and inverse assemblies, respectively, were analyzed with DLS, AFM, and TEM to ascertain their dimensions and properties. Assembly of PEO-b-PIp block copolymers in aqueous solution resulted in well-defined micelles of varying sizes while the assembly in hydrophobic, organic solvent resulted in the formation of different morphologies including large aggregates and well-defined cylindrical and spherical structures.

Macro- and micro-designed chitosan-alginate scaffold architecture by three-dimensional printing and directional freezing.

PubMed

Reed, Stephanie; Lau, Grace; Delattre, Benjamin; Lopez, David Don; Tomsia, Antoni P; Wu, Benjamin M

2016-01-07

While many tissue-engineered constructs aim to treat cartilage defects, most involve chondrocyte or stem cell seeding on scaffolds. The clinical application of cell-based techniques is limited due to the cost of maintaining cellular constructs on the shelf, potential immune response to allogeneic cell lines, and autologous chondrocyte sources requiring biopsy from already diseased or injured, scarce tissue. An acellular scaffold that can induce endogenous influx and homogeneous distribution of native stem cells from bone marrow holds great promise for cartilage regeneration. This study aims to develop such an acellular scaffold using designed, channeled architecture that simultaneously models the native zones of articular cartilage and subchondral bone. Highly porous, hydrophilic chitosan-alginate (Ch-Al) scaffolds were fabricated in three-dimensionally printed (3DP) molds designed to create millimeter scale macro-channels. Different polymer preform casting techniques were employed to produce scaffolds from both negative and positive 3DP molds. Macro-channeled scaffolds improved cell suspension distribution and uptake overly randomly porous scaffolds, with a wicking volumetric flow rate of 445.6 ± 30.3 mm(3) s(-1) for aqueous solutions and 177 ± 16 mm(3) s(-1) for blood. Additionally, directional freezing was applied to Ch-Al scaffolds, resulting in lamellar pores measuring 300 μm and 50 μm on the long and short axes, thus creating micrometer scale micro-channels. After directionally freezing Ch-Al solution cast in 3DP molds, the combined macro- and micro-channeled scaffold architecture enhanced cell suspension uptake beyond either macro- or micro-channels alone, reaching a volumetric flow rate of 1782.1 ± 48 mm(3) s(-1) for aqueous solutions and 440.9 ± 0.5 mm(3) s(-1) for blood. By combining 3DP and directional freezing, we can control the micro- and macro-architecture of Ch-Al to drastically improve cell influx into and distribution within the scaffold, while achieving porous zones that mimic articular cartilage zonal architecture. In future applications, precisely controlled micro- and macro-channels have the potential to assist immediate endogenous bone marrow uptake, stimulate chondrogenesis, and encourage vascularization of bone in an osteochondral scaffold.

Does the Effect of Micro-Environmental Factors on a Street’s Appeal for Adults’ Bicycle Transport Vary across Different Macro-Environments? An Experimental Study

PubMed Central

Mertens, Lieze; Van Cauwenberg, Jelle; Ghekiere, Ariane; Van Holle, Veerle; De Bourdeaudhuij, Ilse; Deforche, Benedicte; Nasar, Jack; Van de Weghe, Nico; Van Dyck, Delfien

2015-01-01

Background Characteristics of the physical environment can be classified into two broad categories: macro- (“raw” urban planning features influenced on a regional level) and micro- (features specifically within a streetscape influenced on a neighborhood level) environmental factors. In urban planning applications, it is more feasible to modify conditions at the neighborhood level than at the regional level. Yet for the promotion of bicycle transport we need to know whether relationships between micro-environmental factors and bicycle transport depend on different types of macro-environments. This study aimed to identify whether the effect of three micro-environmental factors (i.e., evenness of the cycle path surface, speed limits and type of separation between cycle path and motorized traffic) on the street’s appeal for adults’ bicycle transport varied across three different macro-environments (i.e., low, medium and high residential density street). Methods In total, 389 middle-aged adults completed a web-based questionnaire consisting of socio-demographic characteristics and a series of choice tasks with manipulated photographs, depicting two possible routes to cycle along. Conjoint analysis was used to analyze the data. Results Although the magnitude of the overall effects differed, in each macro-environment (i.e., low, medium and high residential density), middle-aged adults preferred a speed limit of 30 km/h, an even cycle path surface and a hedge as separation between motorized traffic and the cycle path compared to a speed limit of 50 or 70 km/h, a slightly uneven or uneven cycle path surface and a curb as separation or no separation between motorized traffic and the cycle path. Conclusions Our results suggest that irrespective of the macro-environment, the same micro-environmental factors are preferred in middle-aged adults concerning the street’s appeal for bicycle transport. The controlled environment simulations in the experimental choice task have the potential to inform real life environmental interventions and suggest that micro-environmental changes can have similar results in different macro-environments. PMID:26317754

Infrared spectral and carbon isotopic characteristics of micro- and macro-diamonds from the Panda kimberlite (Central Slave Craton, Canada)

NASA Astrophysics Data System (ADS)

Melton, G. L.; Stachel, T.; Stern, R. A.; Carlson, J.; Harris, J. W.

2013-09-01

One hundred and twenty-one micro-diamonds (< 1 mm) and 90 macro-diamonds (2.5 mm to 3.4 mm) from the Panda kimberlite (Ekati mine, Central Slave Craton, Canada) were analyzed for nitrogen content, nitrogen aggregation state (%B) and platelet and hydrogen peak areas (cm- 2). Micro-diamond nitrogen concentrations range from < 10 at. ppm to 1696 at. ppm (median = 805 at. ppm) and the median aggregation state is 23%B. Macro-diamonds range from < 10 at. ppm to 1260 at. ppm (median = 187 at. ppm) nitrogen and have a median nitrogen aggregation of 26%B. Platelet and hydrogen peaks were observed in 37% and 79% of the micro-diamonds and 79% and 56% of the macro-diamonds, respectively. Nitrogen based time averaged residence temperatures indicate that micro- and macro-diamonds experienced similar thermal mantle residence histories, both populations displaying bimodal residence temperature distributions with a gap between 1130 °C and 1160 °C (at 3.5 Ga residence). In addition, SIMS carbon isotopic analyses for the micro-diamonds were obtained: δ13C compositions range from - 6.9‰ to + 1.8‰ (median = - 4.3‰). CL imaging reveals distinct growth layers that in some samples differ by > 2‰, but mostly vary by < 0.5‰. Comparison of only the “gem-quality” samples (n = 49 micro- and 90 macro-diamonds) between the two diamond sets, indicates a statistically significant shift of + 1.3‰ in average δ13C from macro- to micro-diamonds and this shift documents distinct diamond forming fluids, fractionation process or growth histories. A broad transition to heavier isotopic values is also observed in connection to decreasing mantle residence temperatures. The bimodal mantle residence temperature distribution may coincide with the transition from highly depleted shallow to more fertile deep lithospheric mantle observed beneath the Central Slave Craton. The increase in δ13C with decreasing residence temperature (proxy for decreasing depth) is interpreted to reflect diamond formation from a carbonate-bearing metasomatic fluid/melt that isotopically evolves as it percolates upward through the lithosphere.

[Monthly changes in the benthic macro-invertebrate community structure in the habitats of Phragmites australis marsh in the Dongtan wetland of the Yangtze River estuary, China].

PubMed

Zhang, Heng; Ye, Jin Yu; Liang, Xiao Li; Zhu, Xiao Jing; Jin, Shao Fei; Chen, Yuan Ge; Zhang, Jia Rui; Dai, Yang

2017-04-18

Based on the data of the benthic macro-invertebrates community in the Phragmites australis marsh in the Dongtan Wetland of the Yangtze River estuary collected from May 2015 to April 2016, we evaluated the monthly variations in the species composition, biodiversity and community structure of the benthic macro-invertebrates. The results showed that the average height and degree of coverage for P. australis increased monthly from March to August, and then deceased from September. The density and aboveground biomass (dry mass, g) of P. australis peaked in July. A total of twenty species (including 2 species only identified to genus level and 2 species identified to family level) were found in the survey periods, including 11 Gastropoda, 5 Malacostraca, 2 Insecta and 2 Polychaeta. Three snail species (Assiminea latericea, Assiminea violacea and Cerithideopsis largillierti) dominated the benthic communities in terms of numerical abundance. The number of epifauna species was the most (11 species), followed by 5 burrowing species and 4 infauna species. There were significant monthly variations in the density and biomass of the macro-invertebrates. The density and biomass of benthic community reached the maximum in August. The Margalef's species richness index (D) and Shannon index (H) showed significant differences monthly, but Pielou's index (J) except in November. Three macro-zoobenthic assemblages were identified with the 42% similarity level. The non-Metric Multidimensional scaling plot indicates that the benthic community in May, October and November was distinct compared to that in the other months. The present study suggested the density of the benthic macro-invertebrates community in the P. australis marshes was somewhat correlated with water temperature, underground biomass and salinity. But those correlation were not significant (P>0.05). Because of the continuous impact of anthropogenic activities, the biodiversity of the benthic macro-invertebrate community has been decreasing for several years. More attention should be paid to the habitat value of the P. australis marshes in the future.

SNMG: a social-level norm-based methodology for macro-governing service collaboration processes

NASA Astrophysics Data System (ADS)

Gao, Ji; Lv, Hexin; Jin, Zhiyong; Xu, Ping

2017-08-01

In order to adapt to the accelerative open tendency of collaborations between enterprises, this paper proposes a Social-level Norm-based methodology for Macro-Governing service collaboration processes, called SNMG, to regulate and control the social-level visible macro-behaviors of the social individuals participating in collaborations. SNMG not only can remove effectively the uncontrollability hindrance confronted with by open social activities, but also enables across-management-domain collaborations to be implemented by uniting the centralized controls of social individuals for respective social activities. Therefore, this paper provides a brand-new system construction mode to promote the development and large-scale deployment of service collaborations.

The contribution of micro- and macro-texture to the skid resistance of flexible pavement.

DOT National Transportation Integrated Search

2016-02-01

Skid resistance is an important characteristic of the pavement surface to reduce the number of road accidents. The : mechanisms involved in the activation of the frictional force required for a safe braking of the vehicle depend on both : the macro- ...

Rice industrial processing worldwide and impact on macro- and micronutrient content, stability, and retention

USDA-ARS?s Scientific Manuscript database

Various processing methods are used in the food industry worldwide to produce numerous rice products with desirable sensory qualities based on cultural and cooking preferences and nutritional considerations. The processes result in variable degrees of macro- and micronutrient content, stability, and...

University Macro Analytic Simulation Model.

ERIC Educational Resources Information Center

Baron, Robert; Gulko, Warren

The University Macro Analytic Simulation System (UMASS) has been designed as a forecasting tool to help university administrators budgeting decisions. Alternative budgeting strategies can be tested on a computer model and then an operational alternative can be selected on the basis of the most desirable projected outcome. UMASS uses readily…

Equivalent Electromagnetic Constants for Microwave Application to Composite Materials for the Multi-Scale Problem

PubMed Central

Fujisaki, Keisuke; Ikeda, Tomoyuki

2013-01-01

To connect different scale models in the multi-scale problem of microwave use, equivalent material constants were researched numerically by a three-dimensional electromagnetic field, taking into account eddy current and displacement current. A volume averaged method and a standing wave method were used to introduce the equivalent material constants; water particles and aluminum particles are used as composite materials. Consumed electrical power is used for the evaluation. Water particles have the same equivalent material constants for both methods; the same electrical power is obtained for both the precise model (micro-model) and the homogeneous model (macro-model). However, aluminum particles have dissimilar equivalent material constants for both methods; different electric power is obtained for both models. The varying electromagnetic phenomena are derived from the expression of eddy current. For small electrical conductivity such as water, the macro-current which flows in the macro-model and the micro-current which flows in the micro-model express the same electromagnetic phenomena. However, for large electrical conductivity such as aluminum, the macro-current and micro-current express different electromagnetic phenomena. The eddy current which is observed in the micro-model is not expressed by the macro-model. Therefore, the equivalent material constant derived from the volume averaged method and the standing wave method is applicable to water with a small electrical conductivity, although not applicable to aluminum with a large electrical conductivity. PMID:28788395

The Stability Analysis Method of the Cohesive Granular Slope on the Basis of Graph Theory.

PubMed

Guan, Yanpeng; Liu, Xiaoli; Wang, Enzhi; Wang, Sijing

2017-02-27

This paper attempted to provide a method to calculate progressive failure of the cohesivefrictional granular geomaterial and the spatial distribution of the stability of the cohesive granular slope. The methodology can be divided into two parts: the characterization method of macro-contact and the analysis of the slope stability. Based on the graph theory, the vertexes, the edges and the edge sequences are abstracted out to characterize the voids, the particle contact and the macro-contact, respectively, bridging the gap between the mesoscopic and macro scales of granular materials. This paper adopts this characterization method to extract a graph from a granular slope and characterize the macro sliding surface, then the weighted graph is analyzed to calculate the slope safety factor. Each edge has three weights representing the sliding moment, the anti-sliding moment and the braking index of contact-bond, respectively, . The safety factor of the slope is calculated by presupposing a certain number of sliding routes and reducing Weight repeatedly and counting the mesoscopic failure of the edge. It is a kind of slope analysis method from mesoscopic perspective so it can present more detail of the mesoscopic property of the granular slope. In the respect of macro scale, the spatial distribution of the stability of the granular slope is in agreement with the theoretical solution.

Investigating the interplay between substrate stiffness and ligand chemistry in directing mesenchymal stem cell differentiation within 3D macro-porous substrates.

PubMed

Haugh, Matthew G; Vaughan, Ted J; Madl, Christopher M; Raftery, Rosanne M; McNamara, Laoise M; O'Brien, Fergal J; Heilshorn, Sarah C

2018-07-01

Dimensionality can have a profound impact on stiffness-mediated differentiation of mesenchymal stem cells (MSCs). However, while we have begun to understand cellular response when encapsulated within 3D substrates, the behavior of cells within macro-porous substrates is relatively underexplored. The goal of this study was to determine the influence of macro-porous topographies on stiffness-mediated differentiation of MSCs. We developed macro-porous recombinant elastin-like protein (ELP) substrates that allow independent control of mechanical properties and ligand chemistry. We then used computational modeling to probe the impact of pore topography on the mechanical stimulus that cells are exposed to within these substrates, and finally we investigated stiffness induced biases towards adipogenic and osteogenic differentiation of MSCs within macro-porous substrates. Computational modeling revealed that there is significant heterogeneity in the mechanical stimuli that cells are exposed to within porous substrates and that this heterogeneity is predominantly due to the wide range of possible cellular orientations within the pores. Surprisingly, MSCs grown within 3D porous substrates respond to increasing substrate stiffness by up-regulating both osteogenesis and adipogenesis. These results demonstrate that within porous substrates the behavior of MSCs diverges from previously observed responses to substrate stiffness, emphasizing the importance of topography as a determinant of cellular behavior. Copyright © 2018 Elsevier Ltd. All rights reserved.

The effect of micro and macro stressors in the work environment on computer professionals' subjective health status and productive behavior in Japan.

PubMed

Tominaga, Maki; Asakura, Takashi; Akiyama, Tsuyoshi

2007-06-01

To investigate the effect of micro and macro stressors in the work environment on the subjective health status and productive behavior of computer professionals, we conducted a web-based investigation with Japanese IT-related company employees in 53 company unions. The questionnaire consisted of individual attributes, employment characteristics, working hour characteristics, company size and profitability, personal characteristics (i.e., Growth Need Strength), micro and macro stressors scale, and four outcome scales concerning the subjective health status and productive behavior. We obtained 1,049 Japanese IT-related company employees' data (response rate: 66%), and analyzed the data of computer engineers (80%; n=871). The results of hierarchical multiple regressions showed that each full model explained 23% in psychological distress, 20% in cumulative fatigue, 44% in job dissatisfaction, and 35% in intentions to leave, respectively. In micro stressors, "quantitative and qualitative work overload" had the strongest influence on both the subjective health status and intentions to leave. Furthermore, in macro stressors, "career and future ambiguity" was the most important predictor of the subjective health status, and "insufficient evaluation systems" and "poor supervisor's support" were important predictors of productive behavior as well. These findings suggest that improving not only micro stressors but also macro stressors will enhance the subjective health status and increase the productive behavior of computer professionals in Japan.

The Quantified Characterization Method of the Micro-Macro Contacts of Three-Dimensional Granular Materials on the Basis of Graph Theory.

PubMed

Guan, Yanpeng; Wang, Enzhi; Liu, Xiaoli; Wang, Sijing; Luan, Hebing

2017-08-03

We have attempted a multiscale and quantified characterization method of the contact in three-dimensional granular material made of spherical particles, particularly in cemented granular material. Particle contact is defined as a type of surface contact with voids in its surroundings, rather than a point contact. Macro contact is a particle contact set satisfying the restrictive condition of a two-dimensional manifold with a boundary. On the basis of graph theory, two dual geometrical systems are abstracted from the granular pack. The face and the face set, which satisfies the two-dimensional manifold with a boundary in the solid cell system, are extracted to characterize the particle contact and the macro contact, respectively. This characterization method is utilized to improve the post-processing in DEM (Discrete Element Method) from a micro perspective to describe the macro effect of the cemented granular material made of spherical particles. Since the crack has the same shape as its corresponding contact, this method is adopted to characterize the crack and realize its visualization. The integral failure route of the sample can be determined by a graph theory algorithm. The contact force is assigned to the weight value of the face characterizing the particle contact. Since the force vectors can be added, the macro contact force can be solved by adding the weight of its corresponding faces.

Response of aquatic macro-invertebrate diversity to environmental factors along the Lower Komati River in Swaziland

NASA Astrophysics Data System (ADS)

Dlamini, Vuyisile; Hoko, Zvikomborero; Murwira, Amon; Magagula, Cebisile

This paper assessed macro-invertebrates diversity as an indicator of aquatic ecosystem health in the Lower Komati River. It also investigated whether this diversity is a function of physico-chemical water quality parameters along an area with major agricultural activities. Bio-assessment of aquatic macro-invertebrates present in the Lower Komati River was carried out at seven sites on the river over 3 months. Water samples were also collected at these sites and analysed for pH, dissolved oxygen, electrical conductivity, turbidity, nitrates, ammonia and ortho-phosphates according to standard methods. It was found out that species diversity along agricultural fields was not significantly different ( p > 0.05) between successive sites. However, nitrate and turbidity among the physico-chemical parameters indicated a significant variation of mean values ( p < 0.05) between sites. With the exception of turbidity, no significant relationship ( p > 0.05) was found between diversity and water quality parameters. Principal Component Analysis also demonstrated the influence of turbidity in the sub-catchments as it was the only parameter that showed a significant loading in all Principal Components. Turbidity seems to be the main parameter influencing aquatic macro-invertebrate diversity in the Lower Komati River at the time of study. The study recommends further studies to determine the seasonal variation of the impact of water quality on macro-invertebrates diversity.

Intake of macro- and micronutrients in Danish vegans.

PubMed

Kristensen, Nadja B; Madsen, Mia L; Hansen, Tue H; Allin, Kristine H; Hoppe, Camilla; Fagt, Sisse; Lausten, Mia S; Gøbel, Rikke J; Vestergaard, Henrik; Hansen, Torben; Pedersen, Oluf

2015-10-30

Since information about macro- and micronutrient intake among vegans is limited we aimed to determine and evaluate their dietary and supplementary intake. Seventy 18-61 years old Danish vegans completed a four-day weighed food record from which their daily intake of macro- and micronutrients was assessed and subsequently compared to an age-range-matched group of 1,257 omnivorous individuals from the general Danish population. Moreover, the vegan dietary and supplementary intake was compared to the 2012 Nordic Nutrition Recommendations (NNR). Dietary intake differed significantly between vegans and the general Danish population in all measured macro- and micronutrients (p < 0.05), except for energy intake among women and intake of carbohydrates among men. For vegans the intake of macro- and micronutrients (including supplements) did not reach the NNR for protein, vitamin D, iodine and selenium. Among vegan women vitamin A intake also failed to reach the recommendations. With reference to the NNR, the dietary content of added sugar, sodium and fatty acids, including the ratio of PUFA to SFA, was more favorable among vegans. At the macronutrient level, the diet of Danish vegans is in better accordance with the NNR than the diet of the general Danish population. At the micronutrient level, considering both diet and supplements, the vegan diet falls short in certain nutrients, suggesting a need for greater attention toward ensuring recommended daily intake of specific vitamins and minerals.

Soil aggregate mediates the impacts of land uses on organic carbon, total nitrogen, and microbial activity in a Karst ecosystem

PubMed Central

Xiao, Shuangshuang; Zhang, Wei; Ye, Yingying; Zhao, Jie; Wang, Kelin

2017-01-01

Understanding the effect of land use on soil carbon, nitrogen, and microbial activity associated with aggregates is critical for thorough comprehension of the C and N dynamics of karst landscapes/ecosystems. We monitored soil organic carbon (SOC), total nitrogen (TN), microbial biomass carbon (MBC), and Cmic: Corg ratio in large macro- (>2 mm), small macro- (0.25–2 mm), and micro- (0.053–0.25 mm) aggregates to determine the changes in soil properties under different land uses in the karst area of Southwest China. Five common land-use types—enclosure land (natural system, control), prescribed-burning land, fuel-wood shrubland, pasture and maize fields—were selected. Results showed that pasture and maize fields remarkably decreased the SOC and TN concentrations in aggregates. Conversion of natural system to other land uses decreased MBC (except for prescribed-burning) and increased Cmic: Corg ratios in aggregates. The extent of the response to land uses of SOC and TN concentrations was similar whereas that of MBC and Cmic: Corg ratios differed across the three aggregate sizes. Further, the SOC concentrations were significantly higher in macro-aggregates than micro-aggregates; the MBC and Cmic: Corg ratios were highest in small macro-aggregates. Therefore, small macro-aggregates might have more active C dynamics. PMID:28211507

The Mechanics of CSCL Macro Scripts

ERIC Educational Resources Information Center

Dillenbourg, Pierre; Hong, Fabrice

2008-01-01

Macro scripts structure collaborative learning and foster the emergence of knowledge-productive interactions such as argumentation, explanations and mutual regulation. We propose a pedagogical model for the designing of scripts and illustrate this model using three scripts. In brief, a script disturbs the natural convergence of a team and in doing…

Identifying Student Competencies in Macro Practice: Articulating the Practice Wisdom of Field Instructors

ERIC Educational Resources Information Center

Regehr, Cheryl; Bogo, Marion; Donovan, Kirsten; Lim, April; Anstice, Susan

2012-01-01

Although a growing literature examines competencies in clinical practice, competencies of students in macro social work practice have received comparatively little attention. A grounded-theory methodology was used to elicit field instructor views of student competencies in community, organization, and policy contexts. Competencies described by…

Preservice Teachers Respond to "And Tango Makes Three": Deconstructing Disciplinary Power and the Heteronormative in Teacher Education

ERIC Educational Resources Information Center

Phillips, Donna Kalmbach; Larson, Mindy Legard

2012-01-01

This study employs Foucualdian concepts to analyse macro and micro contexts of publicly spoken and silent discourses describing "homosexuality," "education" and "teacher" in order to identify teacher subject positions available to preservice teachers. The macro context is analysed by tracing heteronormative discourses…

An Overview of Customer Satisfaction Models.

ERIC Educational Resources Information Center

Hom, Willard

This document is a report on how California community colleges can incorporate customer satisfaction models and theories from business to better serve students. Emphasis is given to two levels of customer satisfaction: macro- and micro-models. Macro-models look at how customer satisfaction relates to other elements or priorities of community…

MACRO- MICRO-PURGE SOIL GAS SAMPLING METHODS FOR THE COLLECTION OF CONTAMINANT VAPORS

EPA Science Inventory

Purging influence on soil gas concentrations for volatile organic compounds (VOCs), as affected by sampling tube inner diameter and sampling depth (i.e., dead-space purge volume), was evaluated at different field sites. A macro-purge sampling system consisted of a standard hollo...

Teaching Macro Practice: An Experiential Learning Project

ERIC Educational Resources Information Center

Carey, Lois A.

2007-01-01

This paper presents a model for teaching an undergraduate social work macro practice course utilizing an experiential learning paradigm. The model provides a campus-based project with social work majors in simultaneous dual roles of students and grassroots leaders, focusing on rape and sexual assault prevention training for college students. This…

An Alternative to the Problematic Macro-Micro Structure of Introductory Economics.

ERIC Educational Resources Information Center

Tinari, Frank D.

The paper explains an alternative structure to teaching micro and macroeconomic theory and describes the characteristics that make it an effective framework for introductory and principles courses. The teaching of economics principles typically proceeds by separating macroeconomic theory and microeconomic theory. But the use of the macro-micro…

The Challenge of Unemployment. A Report to Labour Ministers.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

This report consists of an analysis of labor market conditions in Organisation for Economic Cooperation and Development (OECD) member countries and an exploration of possible future policy responses to the problems of unemployment. Covered in the labor market analysis are the following topics: the macro-economic environment (macro-economic trends…

Mosquitoes and other arthropod macro fauna associated with tank bromeliads in a Peruvian cloud forest.

PubMed

Parker, Daniel M; Zavortink, Thomas J; Billo, Timothy J; Valdez, Ursula; Edwards, John S

2012-03-01

Mosquitoes and other macro arthropods were collected in September 2008 from bucket bromeliads in the vicinity of the Wayqecha Cloud Forest Research Center in southeastern Peru, an area for which there are no published data. Range extensions of culicid species are reported.

LOTUS 1-2-3 Macros for Library Applications.

ERIC Educational Resources Information Center

Howden, Norman

1987-01-01

Describes LOTUS 1-2-3, an advanced spreadsheet with database and text manipulation functions that can be used with microcomputers by librarians to provide customized calculation and data acquisition tools. Macro commands and the menu system are discussed, and an example is given of an invoice procedure. (Author/LRW)

A SAS IML Macro for Loglinear Smoothing

ERIC Educational Resources Information Center

Moses, Tim; von Davier, Alina

2011-01-01

Polynomial loglinear models for one-, two-, and higher-way contingency tables have important applications to measurement and assessment. They are essentially regarded as a smoothing technique, which is commonly referred to as loglinear smoothing. A SAS IML (SAS Institute, 2002a) macro was created to implement loglinear smoothing according to…

Usual Dietary Intakes: SAS Macros for Estimating Ratios of Two Dietary Components that are Consumed Nearly Every Day

Cancer.gov

The following SAS macros can be used to create a bivariate distribution of usual intake of two dietary components that are consumed nearly every day and to calculate percentiles of the population distribution of the ratio of usual intakes.

WOGEN. Work Order Generation Macros for Word Perfect 6.X for Windows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grenz, G.

Included are three general WP macros (two independent and one multiple) and a template used at the Test Reactor Area (TRA) for the generation of the Work Orders (WO`s) used to perform corrective and preventative maintenance, as well as modifications of existing systems and installation of new systems. They incorporate facility specific requirements as well as selected federal/state orders. These macros are used to generate a WP document which is then converted into ASCII text for import to the maintenance software. Currently we are using MCRS but should be compatible with other platforms such as Passport. Reference the included filemore » Wogen.txt for installation and usage instructions.« less

Work Order Generation Macros for Word Perfect 6.X for Windows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grenz, Gordon G.

Included are three general WP macros (two independent and one multiple) and a template used at the Test Reactor Area (TRA) for the generation of the Work Orders (WO's) used to perform corrective and preventative maintenance, as well as modifications of existing systems and installation of new systems. They incorporate facility specific requirements as well as selected federal/state orders. These macros are used to generate a WP document which is then converted into ASCII text for import to the maintenance software. Currently we are using MCRS but should be compatible with other platforms such as Passport. Reference the included filemore » Wogen.txt for installation and usage instructions.« less

Diversification versus specialization in complex ecosystems.

PubMed

Di Clemente, Riccardo; Chiarotti, Guido L; Cristelli, Matthieu; Tacchella, Andrea; Pietronero, Luciano

2014-01-01

By analyzing the distribution of revenues across the production sectors of quoted firms we suggest a novel dimension that drives the firms diversification process at country level. Data show a non trivial macro regional clustering of the diversification process, which underlines the relevance of geopolitical environments in determining the microscopic dynamics of economic entities. These findings demonstrate the possibility of singling out in complex ecosystems those micro-features that emerge at macro-levels, which could be of particular relevance for decision-makers in selecting the appropriate parameters to be acted upon in order to achieve desirable results. The understanding of this micro-macro information exchange is further deepened through the introduction of a simplified dynamic model.

Diversification versus Specialization in Complex Ecosystems

PubMed Central

Di Clemente, Riccardo; Chiarotti, Guido L.; Cristelli, Matthieu; Tacchella, Andrea; Pietronero, Luciano

2014-01-01

By analyzing the distribution of revenues across the production sectors of quoted firms we suggest a novel dimension that drives the firms diversification process at country level. Data show a non trivial macro regional clustering of the diversification process, which underlines the relevance of geopolitical environments in determining the microscopic dynamics of economic entities. These findings demonstrate the possibility of singling out in complex ecosystems those micro-features that emerge at macro-levels, which could be of particular relevance for decision-makers in selecting the appropriate parameters to be acted upon in order to achieve desirable results. The understanding of this micro-macro information exchange is further deepened through the introduction of a simplified dynamic model. PMID:25384059

Macro-motion detection using ultra-wideband impulse radar.

PubMed

Xin Li; Dengyu Qiao; Ye Li

2014-01-01

Radar has the advantage of being able to detect hidden individuals, which can be used in homeland security, disaster rescue, and healthcare monitoring-related applications. Human macro-motion detection using ultra-wideband impulse radar is studied in this paper. First, a frequency domain analysis is carried out to show that the macro-motion yields a bandpass signal in slow-time. Second, the FTFW (fast-time frequency windowing), which has the advantage of avoiding the measuring range reduction, and the HLF (high-pass linear-phase filter), which can preserve the motion signal effectively, are proposed to preprocess the radar echo. Last, a threshold decision method, based on the energy detector structure, is presented.

Portraying Monsters: Framing School Bullying through a Macro Lens

ERIC Educational Resources Information Center

Horton, Paul

2016-01-01

This article critically considers the discourse on school bullying through the conceptual framework of lenses and argues that a macro lens has been utilised by school bullying researchers to bring into focus the characteristics of the individuals involved and the types of actions used. By considering earlier understandings of bullying, the article…

Concerning the Conflicting Nature of the Contribution of the Discipline of Economics to the Teaching of Environmental Studies.

ERIC Educational Resources Information Center

Doeleman, J. A.

1983-01-01

Discusses a serious internal inconsistency of the contribution of economics to environmental studies, focusing on differences between micro- and macro-environmental economics approaches. Reconciliation of several difficulties with the teaching of macro-environmental economics without surrendering the relevance of the approach is also discussed.…

Teaching Macro Principles "after" the Financial Crisis

ERIC Educational Resources Information Center

Blinder, Alan

2010-01-01

Recent events should force everyone who teaches macroeconomics (or finance, for that matter) to reconsider their curriculums. In this short article, the author shares his thoughts about what should and should not be changed in the way economists teach macro principles to beginning students. Two tradeoffs are paramount and must be faced by every…

Human Capital Development: Comparative Analysis of BRICs

ERIC Educational Resources Information Center

Ardichvili, Alexandre; Zavyalova, Elena; Minina, Vera

2012-01-01

Purpose: The goal of this article is to conduct macro-level analysis of human capital (HC) development strategies, pursued by four countries commonly referred to as BRICs (Brazil, Russia, India, and China). Design/methodology/approach: This analysis is based on comparisons of macro indices of human capital and innovativeness of the economy and a…

Exploring the Macro-Micro Dynamic in Data Use Practice

ERIC Educational Resources Information Center

Moss, Pamela A.

2012-01-01

In their opening comments to this special issue on data use, Coburn and Turner point to "one of the most central questions in social theory: the interrelationship between macro-social structure and micro-level action." Questions about data use--which entail social phenomena that range from federal policy to moment-to-moment interactions…

The effect of biobased plastic resins containing chichen feather fibers on the growth and flowering of Begonia boliviensis

USDA-ARS?s Scientific Manuscript database

This study was conducted to evaluate growth and flowering of Begoniaboliviensis A. DC. 'Bonfire' when grown in medium mixed with pellets made from biobased plastic resins containing chicken feather fibers. We also analyzed macro- and macro-elements in soil and leaf tissues during different develope...

When the Macro Facilitates the Micro: A Study of Regimentation and Emergence in Spoken Interaction

ERIC Educational Resources Information Center

Warriner, Doris S.

2012-01-01

In moments of "dispersion, diaspora, and reterritorialization" (Amy Shuman 2006), the personal, the interactional, and the improvised (the "micro") cannot be separated analytically from circulating ideologies, institutional norms, or cultural flows (the "macro"). With a focus on the emergence of identities within social interaction, specifically…

Recontextualizing YouTube: From Macro-Micro to Mass-Mediated Communicative Repertoires

ERIC Educational Resources Information Center

Rymes, Betsy

2012-01-01

In this article, I deconstruct the macro-micro dichotomy by arguing that the very same mass-media messages that appear culturally homogenizing (like catchy tunes and phrases) also invite creative recontextualizations (Bauman and Briggs 1990). Moreover, "the more widely circulated and mass-produced a message is, the more highly diverse the…

Reclaiming and Reimagining Macro Social Work Education: A Collective Biography

ERIC Educational Resources Information Center

Netting, F. Ellen; O'Connor, Mary Katherine; Cole, Portia L.; Hopkins, Karen; Jones, Jenny L.; Kim, Youngmi; Leisey, Monica; Mulroy, Elizabeth A.; Rotabi, Karen Smith; Thomas, M. Lori; Weil, Marie O.; Wike, Traci L.

2016-01-01

The authors focus on a collective biography of 12 women social work educators, all either tenured or in tenure lines, from five different universities at the time of the study. The participants represent several aspects of macro practice including administration, planning, community practice, and policy. Beginning with reflections about coming…

Supplementation of plant-based diets for rainbow trout, Oncorhynchus mykiss with macro-minerals and inositol.

USDA-ARS?s Scientific Manuscript database

Replacement of fish meal with plant products in aquafeeds results in the elimination of dietary compounds which may be important for optimal growth and physiology. A study was conducted to determine if supplementation with macro-minerals and/or inositol would improve performance of rainbow trout fe...

A Theoretical Cybernetic Macro-Script to Articulate Collaborative Interactions of Cyber Entities in Virtual Worlds

ERIC Educational Resources Information Center

Pellas, Nikolaos

2014-01-01

Nowadays, the dissemination and exploitation of three-dimensional (3D) multi-user virtual worlds in higher education have been disclosed from their widespread acceptance as candidate learning platforms. However, it is still lacking a theoretical cybernetic macro-script to elaborate the coordination of multiple complex interactions among…

Macro-Level Approaches to HIV Prevention among Ethnic Minority Youth: State of the Science, Opportunities, and Challenges

ERIC Educational Resources Information Center

Prado, Guillermo; Lightfoot, Marguerita; Brown, C. Hendricks

2013-01-01

The HIV epidemic continues to disproportionately affect ethnic minority youth. These disconcerting health disparities indicate that although existing HIV preventive strategies for ethnic minority youth have been efficacious, they have not significantly reduced the impact of the epidemic in this population. Macro-level interventions, such as…

Integrating Micro-Macro Organizational Communication Research: Rationale, Issues, and Mechanisms.

ERIC Educational Resources Information Center

Miller, Vernon; And Others

The integration of micro-macro variables is critical to the development of organizational communication as an academic field. Mixed-level analysis is inherent in organizational phenomena, and its neglect perpetuates the gap in and fragmentation of organizational communication theories. Three of the many ways to design mixed-level analyses are…

An Alternative Macro-economic Model for the Classroom

ERIC Educational Resources Information Center

Holmes, Bryan

1976-01-01

Presents Michal Kalecki's macro-economic model and two-sector version of the model by Robinson and Eatwell as circular flow diagrams. Advantages of using this approach in first-year undergraduate economics programs are discussed. Available from: General Secretary, Economics Association, Room 340, Hamilton House, Mabledon Place, London WC1H 9BH,…

Effect of RF power density on micro- and macro-structural properties of PECVD grown hydrogenated nanocrystalline silicon thin films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gokdogan, Gozde Kahriman, E-mail: gozdekahriman@gmail.com; Anutgan, Tamila, E-mail: tamilaanutgan@karabuk.edu.tr

2016-03-25

This contribution provides the comparison between micro- and macro-structure of hydrogenated nanocrystalline silicon (nc-Si:H) thin films grown by plasma enhanced chemical vapor deposition (PECVD) technique under different RF power densities (P{sub RF}: 100−444 mW/cm{sup 2}). Micro-structure is assessed through grazing angle X-ray diffraction (GAXRD), while macro-structure is followed by surface and cross-sectional morphology via field emission scanning electron microscopy (FE-SEM). The nanocrystallite size (∼5 nm) and FE-SEM surface conglomerate size (∼40 nm) decreases with increasing P{sub RF}, crystalline volume fraction reaches maximum at 162 mW/cm{sup 2}, FE-SEM cross-sectional structure is columnar except for the film grown at 162 mW/cm{sup 2}. The dependence of previously determinedmore » ‘oxygen content–refractive index’ correlation on obtained macro-structure is investigated. Also, the effect of P{sub RF} is discussed in the light of plasma parameters during film deposition process and nc-Si:H film growth models.« less

Changes in Income at Macro Level Predict Sex Ratio at Birth in OECD Countries.

PubMed

Kanninen, Ohto; Karhula, Aleksi

2016-01-01

The human sex ratio at birth (SRB) is approximately 107 boys for every 100 girls. SRB was rising until the World War II and has been declining slightly after the 1950s in several industrial countries. Recent studies have shown that SRB varies according to exposure to disasters and socioeconomic conditions. However, it remains unknown whether changes in SRB can be explained by observable macro-level socioeconomic variables across multiple years and countries. Here we show that changes in disposable income at the macro level positively predict SRB in OECD countries. A one standard deviation increase in the change of disposable income is associated with an increase of 1.03 male births per 1000 female births. The relationship is possibly nonlinear and driven by extreme changes. The association varies from country to country being particular strong in Estonia. This is the first evidence to show that economic and social conditions are connected to SRB across countries at the macro level. This calls for further research on the effects of societal conditions on general characteristics at birth.

Accumulated energy norm for full waveform inversion of marine data

NASA Astrophysics Data System (ADS)

Shin, Changsoo; Ha, Wansoo

2017-12-01

Macro-velocity models are important for imaging the subsurface structure. However, the conventional objective functions of full waveform inversion in the time and the frequency domain have a limited ability to recover the macro-velocity model because of the absence of low-frequency information. In this study, we propose new objective functions that can recover the macro-velocity model by minimizing the difference between the zero-frequency components of the square of seismic traces. Instead of the seismic trace itself, we use the square of the trace, which contains low-frequency information. We apply several time windows to the trace and obtain zero-frequency information of the squared trace for each time window. The shape of the new objective functions shows that they are suitable for local optimization methods. Since we use the acoustic wave equation in this study, this method can be used for deep-sea marine data, in which elastic effects can be ignored. We show that the zero-frequency components of the square of the seismic traces can be used to recover macro-velocities from synthetic and field data.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malet, Hélène; Dalle, Karen; Brémond, Nicolas

The SARS-CoV macro domain was expressed, purified and crystallized. Selenomethionine-labelled crystals diffracted to 1.8 Å resolution. Macro domains or X domains are found as modules of multidomain proteins, but can also constitute a protein on their own. Recently, biochemical and structural studies of cellular macro domains have been performed, showing that they are active as ADP-ribose-1′′-phosphatases. Macro domains are also present in a number of positive-stranded RNA viruses, but their precise function in viral replication is still unknown. The major human pathogen severe acute respiratory syndrome coronavirus (SARS-CoV) encodes 16 non-structural proteins (nsps), one of which (nsp3) encompasses a macromore » domain. The SARS-CoV nsp3 gene region corresponding to amino acids 182–355 has been cloned, expressed in Escherichia coli, purified and crystallized. The crystals belong to space group P2{sub 1}, with unit-cell parameters a = 37.5, b = 55.6, c = 108.9 Å, β = 91.4°, and the asymmetric unit contains either two or three molecules. Both native and selenomethionine-labelled crystals diffract to 1.8 Å.« less

A molecular signaling approach to linking intraspecific variation and macro-evolutionary patterns.

PubMed

Swanson, Eli M; Snell-Rood, Emilie C

2014-11-01

Macro-evolutionary comparisons are a valued tool in evolutionary biology. Nevertheless, our understanding of how systems involved in molecular signaling change in concert with phenotypic diversification has lagged. We argue that integrating our understanding of the evolution of molecular signaling systems with phylogenetic comparative methods is an important step toward understanding the processes linking variation among individuals with variation among species. Focusing mostly on the endocrine system, we discuss how the complexity and mechanistic nature of molecular signaling systems may influence the application and interpretation of macro-evolutionary comparisons. We also detail five hypotheses concerning the role that physiological mechanisms can play in shaping macro-evolutionary patterns, and discuss ways in which these hypotheses could influence phenotypic diversification. Finally, we review a series of tools able to analyze the complexity of physiological systems and the way they change in concert with the phenotypes for which they coordinate development. © The Author 2014. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email: journals.permissions@oup.com.

Rapid identification of macro nutrients in pharmaceutical medicine using laser-induced plasma spectroscopy

NASA Astrophysics Data System (ADS)

Khumaeni, Ali; Sugito, Heri; Yoyo Wardaya, Asep; Setia Budi, Wahyu

2018-05-01

Identification of macro nutrients in medicine is really necessary for healthy purpose. In this study, identification of macro elements in pharmaceutical products was carried out by laser-induced plasma spectroscopy (LIPS). A comparative study was made by employing different types of laser, namely an Nd:YAG laser and a pulse TEA CO2 laser. Experimentally, the laser beam was directed and focused by a convex lens on a mineral supplement tablet. A luminous plasma was induced on the tablet’s surface. Sharp and high-intensity emission spectra of macro elements including Ca and Mg were detected both in LIBS using Nd:YAG and pulse CO2 lasers. However, the intensities of Ca and Mg spectra are much higher for the LIBS using CO2 laser. Based on the analysis, the plasma temperature plays important role in the spectra. Namely, the plasma induced by a TEA CO2 laser is much higher than that of Nd:YAG laser; the plasma temperature for the case of TEA CO2 laser and Nd:YAG laser were 6400 K and 4500 K, respectively.

The inland water macro-invertebrate occurrences in Flanders, Belgium.

PubMed

Vannevel, Rudy; Brosens, Dimitri; Cooman, Ward De; Gabriels, Wim; Frank Lavens; Mertens, Joost; Vervaeke, Bart

2018-01-01

The Flanders Environment Agency (VMM) has been performing biological water quality assessments on inland waters in Flanders (Belgium) since 1989 and sediment quality assessments since 2000. The water quality monitoring network is a combined physico-chemical and biological network, the biological component focusing on macro-invertebrates. The sediment monitoring programme produces biological data to assess the sediment quality. Both monitoring programmes aim to provide index values, applying a similar conceptual methodology based on the presence of macro-invertebrates. The biological data obtained from both monitoring networks are consolidated in the VMM macro-invertebrates database and include identifications at family and genus level of the freshwater phyla Coelenterata, Platyhelminthes, Annelida, Mollusca, and Arthropoda. This paper discusses the content of this database, and the dataset published thereof: 282,309 records of 210 observed taxa from 4,140 monitoring sites located on 657 different water bodies, collected during 22,663 events. This paper provides some background information on the methodology, temporal and spatial coverage, and taxonomy, and describes the content of the dataset. The data are distributed as open data under the Creative Commons CC-BY license.

A force-controllable macro-micro manipulator and its application to medical robots

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.; Uecker, Darrin R.; Wang, Yulun

1994-01-01

This paper describes an 8-degrees-of-freedom macro-micro robot. This robot is capable of performing tasks that require accurate force control, such as polishing, finishing, grinding, deburring, and cleaning. The design of the macro-micro mechanism, the control algorithms, and the hardware/software implementation of the algorithms are described in this paper. Initial experimental results are reported. In addition, this paper includes a discussion of medical surgery and the role that force control may play. We introduce a new class of robotic systems collectively called Robotic Enhancement Technology (RET). RET systems introduce the combination of robotic manipulation with human control to perform manipulation tasks beyond the individual capability of either human or machine. The RET class of robotic systems offers new challenges in mechanism design, control-law development, and man/machine interface design. We believe force-controllable mechanisms such as the macro-micro structure we have developed are a necessary part of RET. Work in progress in the area of RET systems and their application to minimally invasive surgery is presented, along with future research directions.

Technique for writing of fiber Bragg gratings over or near preliminary formed macro-structure defects in silica optical fibers

NASA Astrophysics Data System (ADS)

Evtushenko, Alexander S.; Faskhutdinov, Lenar M.; Kafarova, Anastasia M.; Kazakov, Vadim S.; Kuznetzov, Artem A.; Minaeva, Alina Yu.; Sevruk, Nikita L.; Nureev, Ilnur I.; Vasilets, Alexander A.; Andreev, Vladimir A.; Morozov, Oleg G.; Burdin, Vladimir A.; Bourdine, Anton V.

2017-04-01

This work presents method for performing precision macro-structure defects "tapers" and "up-tapers" written in conventional silica telecommunication multimode optical fibers by commercially available field fusion splicer with modified software settings and following writing fiber Bragg gratings over or near them. We developed technique for macrodefect geometry parameters estimation via analysis of photo-image performed after defect writing and displayed on fusion splicer screen. Some research results of defect geometry dependence on fusion current and fusion time values re-set in splicer program are represented that provided ability to choose their "the best" combination. Also experimental statistical researches concerned with "taper" and "up-taper" diameter stability as well as their insertion loss values during their writing under fixed corrected splicer program parameters were performed. We developed technique for FBG writing over or near macro-structure defect. Some results of spectral response measurements produced for short-length samples of multimode optical fiber with fiber Bragg gratings written over and near macro-defects prepared by using proposed technique are presented.

Two dimensions of trust in physicians in OECD-countries.

PubMed

Saarinen, Arttu Olavi; Räsänen, Pekka; Kouvo, Antti

2016-01-01

The purpose of this paper is to analyse citizens' trust in physicians in 22 OECD countries. The authors measure trust in physicians using items on generalised and particularised trust. Individual-level data are received from the ISSP Research Group (2011). The authors also utilise macro variables drawn from different data banks. Data were analysed using descriptive statistics and xtlogit regression models. The main micro-level hypothesis is that low self-reported health is strongly associated with lower trust in physicians. The second micro-level hypothesis is that frequent meetings with physicians result in higher trust. The third micro-level hypothesis assumes that males, and older and better educated respondents, express higher trust compared to others. The first macro-level hypothesis is that lower income inequality leads to higher trust in physicians. The second macro-level hypothesis is that greater physician density leads to higher trust in physicians. The authors found that the influence of individual and macro-level characteristics varies between trust types. Results indicate that both trust types are clearly associated with individual-level determinants. However, only general trust in physicians has weak associations with macro-level indicators (mainly physician density) and therefore on institutional cross-country differences. It seems that particularised trust in a physician's skills is more restricted to the individuals' health and their own experiences meeting doctors, whereas general trust likely reflects attitudes towards the prevalent profession in the country. The findings hold significance for healthcare systems research and for research concerning social trust generally.

The Stability Analysis Method of the Cohesive Granular Slope on the Basis of Graph Theory

PubMed Central

Guan, Yanpeng; Liu, Xiaoli; Wang, Enzhi; Wang, Sijing

2017-01-01

This paper attempted to provide a method to calculate progressive failure of the cohesive-frictional granular geomaterial and the spatial distribution of the stability of the cohesive granular slope. The methodology can be divided into two parts: the characterization method of macro-contact and the analysis of the slope stability. Based on the graph theory, the vertexes, the edges and the edge sequences are abstracted out to characterize the voids, the particle contact and the macro-contact, respectively, bridging the gap between the mesoscopic and macro scales of granular materials. This paper adopts this characterization method to extract a graph from a granular slope and characterize the macro sliding surface, then the weighted graph is analyzed to calculate the slope safety factor. Each edge has three weights representing the sliding moment, the anti-sliding moment and the braking index of contact-bond, respectively, E1E2E3E1E2E3. The safety factor of the slope is calculated by presupposing a certain number of sliding routes and reducing Weight E3 repeatedly and counting the mesoscopic failure of the edge. It is a kind of slope analysis method from mesoscopic perspective so it can present more detail of the mesoscopic property of the granular slope. In the respect of macro scale, the spatial distribution of the stability of the granular slope is in agreement with the theoretical solution. PMID:28772596

Variation in soil macro-fauna diversity in seven humus orders of a Parrotio-Carpinetum forest association on Chromic Cambisols of Shast-klateh area in Iran

NASA Astrophysics Data System (ADS)

Izadi, M.; Habashi, H.; Waez-Mousavi, S. M.

2017-03-01

Soil biodiversity includes organisms which spend a part or all of their life cycle on or in the soil. Among soil-dwelling animals, macro-fauna as an important group of animals have important effects on the dynamics of soil organic matter and litter decomposition process. The humus forms interact with the climatic conditions, flora, as well as soil fauna, and microbial activity. In new humus form classifications, soil organisms play an important role in separation of humus horizons from one another. The subject of this study was to determine the diversity of macro fauna for different humus forms. We determined humus forms using morphological classification, and then 69 random samples were taken from plots of 100 cm2 in area, and soil macro-fauna species were collected by hand sorting method. Two classes of humus forms, including Mull (with three humus orders, namely Dysmull, Oligomull, and Mesomull,) and Amphi (with four humus orders, namely Leptoamphi, Eumacroamphi, Eumesoamphi, and Pachyamphi) were identified. A number of 13 macro-fauna orders were identified using identification key. Among the humus orders, Shannon diversity, Simpson evenness and Margalef richness indices were the highest in Pachyamphi order. Arthropod diversity in Pachyamphi humus order was higher than those of Mull. These results showed that diversity of soil macrofauna increase by increasing the thickness of the organic horizons (OL, OF, OH), especially OH horizon.

The status and importance of crude protein and macro minerals in native pastures growing on Vertisols of the central highlands of Ethiopia.

PubMed

Gizachew, Lemma; Smit, G N

2012-01-01

The effects of pasture management, season and soil nutrient status on crude protein (CP) and macro mineral concentration of native pasture was studied in the Vertisol areas of the central Ethiopian highland. Soil and herbage samples from 18 continuously grazed (CG) and 12 seasonally grazed (SG) pasture sites were analyzed for N, P, Ca, Mg, K and Na. Soil and dry season CG pasture samples were collected in January and February 2001 (dry season: November-February), while wet season CG and SG pasture samples were collected during September 2001 (wet season: April-October). The Potassium concentration (2.55%) of mixed herbage samples from SG pasture exceeded the K values (1.80%) from CG pasture (P < 0.01). Significant (P < 0.01) differences of CP and macro minerals concentrations were noted among forage species. The mean CP and K concentrations of herbage from CG pasture were higher (P < 0.01) during the wet than during the dry season (5.97 and 1.80% vs. 3.18 and 0.79%), while the opposite was true for Ca (0.49% vs. 0.61%) (P < 0.05). Regarding soil macro minerals and the corresponding herbage macro mineral concentrations, significant (P < 0.05) but inconsistent correlations were found for Ca, P, Mg and Na. The results suggest that pasture management, season and to some extend soil nutrient status, can affect herbage CP and macro mineral composition. The levels of CP in CG pasture and that of P and Na in both CG and SG pastures may fall below the requirements of grazing livestock. Resting at critical stages of the growth cycle of the forage species encouraged the recovery of desirable species. For this reason resting of pasture can contribute significantly to the quality of the native pastures of the Vertisols of the central Ethiopian highlands and should be encouraged. Copyright © 2011 Elsevier Ltd. All rights reserved.

Potential of dynamic spectrum allocation in LTE macro networks

NASA Astrophysics Data System (ADS)

Hoffmann, H.; Ramachandra, P.; Kovács, I. Z.; Jorguseski, L.; Gunnarsson, F.; Kürner, T.

2015-11-01

In recent years Mobile Network Operators (MNOs) worldwide are extensively deploying LTE networks in different spectrum bands and utilising different bandwidth configurations. Initially, the deployment is coverage oriented with macro cells using the lower LTE spectrum bands. As the offered traffic (i.e. the requested traffic from the users) increases the LTE deployment evolves with macro cells expanded with additional capacity boosting LTE carriers in higher frequency bands complemented with micro or small cells in traffic hotspot areas. For MNOs it is crucial to use the LTE spectrum assets, as well as the installed network infrastructure, in the most cost efficient way. The dynamic spectrum allocation (DSA) aims at (de)activating the available LTE frequency carriers according to the temporal and spatial traffic variations in order to increase the overall LTE system performance in terms of total network capacity by reducing the interference. This paper evaluates the DSA potential of achieving the envisaged performance improvement and identifying in which system and traffic conditions the DSA should be deployed. A self-optimised network (SON) DSA algorithm is also proposed and evaluated. The evaluations have been carried out in a hexagonal and a realistic site-specific urban macro layout assuming a central traffic hotspot area surrounded with an area of lower traffic with a total size of approximately 8 × 8 km2. The results show that up to 47 % and up to 40 % possible DSA gains are achievable with regards to the carried system load (i.e. used resources) for homogenous traffic distribution with hexagonal layout and for realistic site-specific urban macro layout, respectively. The SON DSA algorithm evaluation in a realistic site-specific urban macro cell deployment scenario including realistic non-uniform spatial traffic distribution shows insignificant cell throughput (i.e. served traffic) performance gains. Nevertheless, in the SON DSA investigations, a gain of up to 25 % has been observed when analysing the resource utilisation in the non-hotspot cells.

Does water level affect benthic macro-invertebrates of a marginal lake in a tropical river-reservoir transition zone?

PubMed

Zerlin, R A; Henry, R

2014-05-01

Benthic macro-invertebrates are important components of freshwater ecosystems which are involved in ecological processes such as energy transfer between detritus and consumers and organic matter recycling. The aim of this work was to investigate the variation in organism richness, diversity and density of benthic fauna during the annual cycle in Camargo Lake, a lake marginal to Paranapanema River, southeast Brazil. The correlation of environmental factors with community attributes of the macro-benthic fauna was assessed. Since Camargo Lake is connected to the river, we tested the hypothesis that water level variation is the main regulating factor of environmental variables and of the composition and abundance of benthic macro-invertebrates. The results indicated that lake depth varied with rainfall, being the highest at the end of the rising water period and the lowest at the beginning of this period. The sediment granulometry was more heterogeneous at the bottom of the lake by the end of the high water period. The benthic macro-invertebrate fauna was composed by 15 taxa. The Diptera order was represented by seven taxa and had greater richness in relation to other taxa. This group was responsible for 60% of the total abundance of organisms, followed by Ephemeroptera (22%) and Anellida (16%). Significant differences were observed over time in total richness and, in density of Narapa bonettoi, Chaoborus, Ablabesmyia gr. annulata, Chironomus gigas, Larsia fittkau, and Procladius sp. 2. Total taxa richness correlated negatively with water pH, transparency, conductivity, and bottom water oxygen. Higher positive correlations were found between the densities of some taxa and bottom water oxygen, conductivity and very fine sand, silt + clay of sediment, while negative correlations were recorded with organic matter, and fine, medium and coarse sand, bottom water temperature, mean temperature and rainfall. The significant temporal difference in water level was associated with changes in abiotic factors and macro-invertebrate community attributes.

A New Dual-Pore Formation Factor Model: A Percolation Network Study and Comparison to Experimental Data

NASA Astrophysics Data System (ADS)

Tang, Y. B.; Li, M.; Bernabe, Y.

2014-12-01

We modeled the electrical transport behavior of dual-pore carbonate rocks in this paper. Based on experimental data of a carbonate reservoir in China, we simply considered the low porosity samples equivalent to the matrix (micro-pore system) of the high porosity samples. For modeling the bimodal porous media, we considered that the matrix is homogeneous and interconnected. The connectivity and the pore size distribution of macro-pore system are varied randomly. Both pore systems are supposed to act electrically in parallel, connected at the nodes, where the fluid exchange takes place, an approach previously used by Bauer et al. (2012). Then, the effect of the properties of matrix, the pore size distribution and connectivity of macro-pore system on petrophysical properties of carbonates can be investigated. We simulated electrical current through networks in three-dimensional simple cubic (SC) and body-center cubic (BCC) with different coordination numbers and different pipe radius distributions of macro-pore system. Based on the simulation results, we found that the formation factor obeys a "universal" scaling relationship (i.e. independent of lattice type), 1/F∝eγz, where γ is a function of the normalized standard deviation of the pore radius distribution of macro-pore system and z is the coordination number of macro-pore system. This relationship is different from the classic "universal power law" in percolation theory. A formation factor model was inferred on the basis of the scaling relationship mentioned above and several scale-invariant quantities (such as hydraulic radius rH and throat length l of macro-pore). Several methods were developed to estimate corresponding parameters of the new model with conventional core analyses. It was satisfactorily tested against experimental data, including some published experimental data. Furthermore, the relationship between water saturation and resistivity in dual-pore carbonates was discussed based on the new model.

Clothing adjustments for concealed soft body armor during moderate physical exertion.

PubMed

Ryan, Greg A; Bishop, Stacy H; Herron, Robert L; Katica, Charles P; Elbon, Bre'anna L; Bosak, Andrew M; Bishop, Phillip

2015-01-01

Previous research has studied the impact of Level II concealed soft body armor (SBA) on the augmentation of heat storage in a hot environment simulating a typical summer day in the southeastern United States (wet bulb globe temperature [WBGT] = 30°C) and noted a significant difference between macro- and micro-WBGTs. The purpose of this study was to characterize the microclimate (micro-WBGT) under a concealed Level II SBA during 60 min of moderately intense work at two separate macro-WBGTs (26°C and 30°C), and to establish WBGT corrections to allow prediction of heat strain in an individual wearing a concealed Level II SBA. A single trial was performed with nine volunteers (27 ± 4 years) outfitted with a simulated standard law enforcement uniform and a traditional concealed Level II SBA, in a moderately warm environment (WBGT = 26°C). Each participant performed cycles of 12 min of walking (1.25 L · min(-1)) and 3 min of arm curls (14.3 kg, 0.6 L · min(-1)) with a 5 min rest after every other cycle, for a total of 60 minutes. This trial was compared to an identical previously completed 60-min work bout at 30°C. A two-way repeated measures ANOVA with Post hoc Bonferroni and paired samples t-test analysis was conducted. A greater difference between macro- micro-WBGTs existed at 26°C compared to the 30°C macro-WBGT. Under these conditions, a moderate work in Level II SBA requires a WBGT correction of 8.9°C and 6.2°C at macro-WBGTs of 26°C and 30°C, respectively. A modified simple linear regression prediction model was established for mean Micro-WBGT for each macro-WBGTs after the plateau point at the 30 min mark. The derivation regressions at 26°C (R(2) = 0.99), and 30°C (R(2) = 0.99) indicate that micro-WBGT could be predicted for each 15 minutes time at both macro-WBGTs tested for individuals doing moderate intensity (300 Kcals · hr(-1)) work wearing concealed Level II SBA.

Employment status and mental health care use in times of economic contraction: a repeated cross-sectional study in Europe, using a three-level model.

PubMed

Buffel, Veerle; van de Straat, Vera; Bracke, Piet

2015-03-11

Framed within the recent economic crisis, in this study we investigate the medical mental health care use of the unemployed compared with that of the employed in Europe, and whether the relationship between employment status and mental health care use varies across macro-economic conditions. We examine whether the macro-economic context and changes therein are related to mental health care use, via their impact on mental health, or more directly, irrespective of mental health. We use data from three waves of the Eurobarometer (2002, 2005/2006, and 2010), which has a repeated cross-sectional and cross-national design. Linear and logistic multilevel regression analyses are performed with mental health, contacting a general practitioner, and contacting a psychiatrist for mental health problems as dependent variables. The multilevel design has three levels (the individual, the period-country, and the country), which allows us to estimate both longitudinal and cross-sectional macro-effects. The macro-economic context and changes therein are assessed using national unemployment rates and growth rates in Gross Domestic Product (GDP). The mean unemployment rate is negatively related to mental health, although for women, this effect only applies to the employed. Among women, no relationship is found between changes in the macro-economic context and mental health. The unemployment rate, and changes in both the unemployment rate and the real GDP growth rate, are associated with men's care use, regardless of their mental health, whereas this does not hold for women. In countries with an increase in the unemployment rate, both unemployed and employed men tend to medicalize their problems more by contacting a general practitioner, irrespective of their mental health, while the likelihood of contacting a psychiatrist is lower among employed men. Our findings stress the importance of taking the macro-economic context and changes therein into account when studying the mental health care use of unemployed people compared with the employed, in particular among men. Moreover, it is important to make the distinction between primary and specialized medical care use, as the impact of macro-economic conditions is dependent on the type of care, which also applies when controlling for mental health.

Designing Better Scaffolding in Teaching Complex Systems with Graphical Simulations

NASA Astrophysics Data System (ADS)

Li, Na

Complex systems are an important topic in science education today, but they are usually difficult for secondary-level students to learn. Although graphic simulations have many advantages in teaching complex systems, scaffolding is a critical factor for effective learning. This dissertation study was conducted around two complementary research questions on scaffolding: (1) How can we chunk and sequence learning activities in teaching complex systems? (2) How can we help students make connections among system levels across learning activities (level bridging)? With a sample of 123 seventh-graders, this study employed a 3x2 experimental design that factored sequencing methods (independent variable 1; three levels) with level-bridging scaffolding (independent variable 2; two levels) and compared the effectiveness of each combination. The study measured two dependent variables: (1) knowledge integration (i.e., integrating and connecting content-specific normative concepts and providing coherent scientific explanations); (2) understanding of the deep causal structure (i.e., being able to grasp and transfer the causal knowledge of a complex system). The study used a computer-based simulation environment as the research platform to teach the ideal gas law as a system. The ideal gas law is an emergent chemical system that has three levels: (1) experiential macro level (EM) (e.g., an aerosol can explodes when it is thrown into the fire); (2) abstract macro level (AM) (i.e., the relationships among temperature, pressure and volume); (3) micro level (Mi) (i.e., molecular activity). The sequencing methods of these levels were manipulated by changing the order in which they were delivered with three possibilities: (1) EM-AM-Mi; (2) Mi-AM-EM; (3) AM-Mi-EM. The level-bridging scaffolding variable was manipulated on two aspects: (1) inserting inter-level questions among learning activities; (2) two simulations dynamically linked in the final learning activity. Addressing the first research question, the Experiential macro-Abstract macro-Micro (EM-AM-Mi) sequencing method, following the "concrete to abstract" principle, produced better knowledge integration while the Micro-Abstract macro-Experiential macro (Mi-AM-EM) sequencing method, congruent with the causal direction of the emergent system, produced better understanding of the deep causal structure only when level-bridging scaffolding was provided. The Abstract macro-Micro-Experiential macro (AM-Mi-EM) sequencing method produced worse performance in general, because it did not follow the "concrete to abstract" principle, nor did it align with the causal structure of the emergent system. As to the second research question, the results showed that level-bridging scaffolding was important for both knowledge integration and understanding of the causal structure in learning the ideal gas law system.

Moving the Field Forward: A Micro-Meso-Macro Model for Critical Language Planning. The Case of Estonia

ERIC Educational Resources Information Center

Skerrett, Delaney Michael

2016-01-01

This study investigates "de facto" language policy in Estonia. It investigates how language choices at the micro (or individual) level are negotiated within the macro (or social and historical) context: how official language policy and other features of the discursive environment surrounding language and its use in Estonia translate into…

Relevance of the hadronic interaction model in the interpretation of multiple muon data as detected with the MACRO experiment

NASA Astrophysics Data System (ADS)

Ambrosio, M.; Antolini, R.; Aramo, C.; Auriemma, G.; Baldini, A.; Barbarino, G. C.; Barish, B. C.; Battistoni, G.; Bellotti, R.; Bemporad, C.; Bernardini, P.; Bilokon, H.; Bisi, V.; Bloise, C.; Bower, C.; Bussino, S.; Cafagna, F.; Calicchio, M.; Campana, D.; Carboni, M.; Castellano, M.; Cecchini, S.; Cei, F.; Chiarella, V.; Coutu, S.; de Benedictis, L.; de Cataldo, G.; Dekhissi, H.; de Marzo, C.; de Mitri, I.; de Vincenzi, M.; di Credico, A.; Erriquez, O.; Favuzzi, C.; Forti, C.; Fusco, P.; Giacomelli, G.; Giannini, G.; Giglietto, N.; Grassi, M.; Gray, L.; Grillo, A.; Guarino, F.; Guarnaccia, P.; Gustavino, C.; Habig, A.; Hanson, K.; Hawthorne, A.; Heinz, R.; Iarocci, E.; Katsavounidis, E.; Kearns, E.; Kyriazopoulou, S.; Lamanna, E.; Lane, C.; Levin, D. S.; Lipari, P.; Longley, N. P.; Longo, M. J.; Maaroufi, F.; Mancarella, G.; Mandrioli, G.; Manzoor, S.; Margiotta Neri, A.; Marini, A.; Martello, D.; Marzari-Chiesa, A.; Mazziotta, M. N.; Mazzotta, C.; Michael, D. G.; Mikheyev, S.; Miller, L.; Monacelli, P.; Montaruli, T.; Monteno, M.; Mufson, S.; Musser, J.; Nicoló, D.; Nolty, R.; Okada, C.; Orth, C.; Osteria, G.; Palamara, O.; Patera, V.; Patrizii, L.; Pazzi, R.; Peck, C. W.; Petrera, S.; Pistilli, P.; Popa, V.; Rainó, A.; Rastelli, A.; Reynoldson, J.; Ronga, F.; Rubizzo, U.; Sanzgiri, A.; Satriano, C.; Satta, L.; Scapparone, E.; Scholberg, K.; Sciubba, A.; Serra-Lugaresi, P.; Severi, M.; Sioli, M.; Sitta, M.; Spinelli, P.; Spinetti, M.; Spurio, M.; Steinberg, R.; Stone, J. L.; Sulak, L. R.; Surdo, A.; Tarlé, G.; Togo, V.; Walter, C. W.; Webb, R.

1999-03-01

With the aim of discussing the effect of the possible sources of systematic uncertainties in simulation models, the analysis of multiple muon events from the MACRO experiment at Gran Sasso is reviewed. In particular, the predictions from different currently available hadronic interaction models are compared.

Ontario Universities Statistical Compendium, 1970-71 to 1979-80. Part A, Macro-Indicators.

ERIC Educational Resources Information Center

Council of Ontario Universities, Toronto.

Macro-indicators concerning finances of Ontario universities for 1970-71 to 1979-80 are considered, along with supporting data that might be used to generate such indicators, and complementary analyses that might be used to enhance understanding of both indicators and data. Operating revenue in constant dollars has been identified per…

Macro-Structural Determinants of Political Freedom in Developing Countries: A Cross National Analysis

ERIC Educational Resources Information Center

Tsai, Ming-Chang

2006-01-01

This study attempts to evaluate the impacts of macro-structural factors on political freedom in developing countries (DCs). Political freedom is conceptualized as civil liberty and political rights the general population of a society can enjoy in influencing public policy. The Freedom House indexes are used as measures of freedom. In explaining…

Macro, Submicro, and Symbolic: The Many Faces of the Chemistry "Triplet"

ERIC Educational Resources Information Center

Talanquer, Vicente

2011-01-01

The idea that chemical knowledge can be represented in three main ways: macro, submicro, and symbolic (chemistry triplet) has become paradigmatic in chemistry and science education. It has served both as the base of theoretical frameworks that guide research in chemical education and as a central idea in various curriculum projects. However, this…

Line-scan macro-scale Raman chemical imaging for authentication of powdered foods and ingredients

USDA-ARS?s Scientific Manuscript database

Adulteration and fraud for powdered foods and ingredients are rising food safety risks that threaten consumers’ health. In this study, a newly developed line-scan macro-scale Raman imaging system using a 5 W 785 nm line laser as excitation source was used to authenticate the food powders. The system...

Effecting Organizational Change at the Macro Level of Professions

ERIC Educational Resources Information Center

Green, Robert Anthony

2017-01-01

Much has been written in academic and popular publications about organizational change. Topics have ranged from case studies to anecdotal stories of how leaders can change an organization. There is little written on changing the culture and vision of a profession at the macro level. This dissertation shows that one key to effecting change within a…

The Role of the Company in Generating Skills. The Learning Effects of Work Organization. Denmark.

ERIC Educational Resources Information Center

Kristensen, Peer Hull; Petersen, James Hopner

The impact of developments in work organizations on the skilling process in Denmark was studied through a macro analysis of available statistical information about the development of workplace training in Denmark and case studies of three Danish firms. The macro analysis focused on the following: Denmark's vocational training system; the Danish…

Merging Micro and Macro Intervention: Social Work Practice with Groups in the Community

ERIC Educational Resources Information Center

Knight, Carolyn; Gitterman, Alex

2018-01-01

Clinical or micro intervention predominates in social work education and practice. The prevailing assumption in social work practice and education is that one engages in either micro or macro intervention. In this article, we describe how these interventions may be merged into an integrated whole through social work practice with groups. The…

Perception of Transfer Climate Factors in the Macro and Micro Organizational Work Environment

ERIC Educational Resources Information Center

Diggs, Byron Kenneth

2011-01-01

This qualitative study was designed to provide insight on the perceived transfer climate factors in the macro and micro organizational work environment that may influence an employee's willingness to transfer what was learned in a training program to the job. More specifically, the purpose of the study was to delineate descriptive patterns and…

Discussing Course Literature Online: Analysis of Macro Speech Acts in an Asynchronous Computer Conference

ERIC Educational Resources Information Center

Kosunen, Riitta

2009-01-01

This paper presents a macro speech act analysis of computer-mediated conferencing on a university course on language pedagogy. Students read scholarly articles on language learning and discussed them online, in order to make sense of them collaboratively in preparation for a reflective essay. The study explores how the course participants made use…

Processing the Army’s Wartime Replacements: The Preferred CONUS Replacement Center Concept.

DTIC Science & Technology

1987-12-01

Replacement System. The first model, the macro model, was a network flow model which was used to analyze the flow of replacements from their source through...individual CRCs. Through the analysis of the macro model, recommendations were made on how the CRC system should be configured in terms of size, location

Intertwining Lexical and Conceptual Learning Trajectories--A Design Research Study on Dual Macro-Scaffolding towards Percentages

ERIC Educational Resources Information Center

Pöhler, Birte; Prediger, Susanne

2015-01-01

Monolingual or multilingual students with low academic language proficiency need to acquire conceptual understanding for percentages and the language to communicate about them. The design research study explores how these two learning goals can be fostered by a macro-scaffolding approach for seventh grade students. The dual hypothetical learning…

Metagenre on the WPA-L: Transitional Threads as Nexus for Micro/Macro-Level Discourse on the Dissertation

ERIC Educational Resources Information Center

Pantelides, Kate

2015-01-01

In Carolyn Miller's "Rhetorical Community: The Cultural Basis of Genre," she revisits her assertion that genres are cultural artifacts and questions the nature of the relationship between micro-level, individual speech acts, and macro-level genres and systems. To demonstrate this relationship, I analyze "meta-genre" accounts of…

Ontario Universities Statistical Compendium, 1970-71 to 1978-79. Part A, Macro-Indicators.

ERIC Educational Resources Information Center

Council of Ontario Universities, Toronto.

Macro-indicators on the conditions of Ontario universities and supporting data that might be used to generate such indicators were developed, and analyses of both indicators and data were undertaken. Overall objectives were as follows: (1) to measure the real resources available to the Ontario university system as a function of the volume of…

Research on International Student Flows from a Macro Perspective: A Network Analysis of 1985, 1989 and 1995.

ERIC Educational Resources Information Center

Chen, Tse-Mei; Barnett, George A.

2000-01-01

Analysis of 64 countries representing the largest number of international student exchanges examines student flows from a macro perspective. Findings indicate that the international student exchange network is relatively stable; the United States and Western industrialized nations are at the center; East European and Asian countries have become…

Tonal Interface to MacroMolecules (TIMMol): A Textual and Tonal Tool for Molecular Visualization

ERIC Educational Resources Information Center

Cordes, Timothy J.; Carlson, C. Britt; Forest, Katrina T.

2008-01-01

We developed the three-dimensional visualization software, Tonal Interface to MacroMolecules or TIMMol, for studying atomic coordinates of protein structures. Key features include audio tones indicating x, y, z location, identification of the cursor location in one-dimensional and three-dimensional space, textual output that can be easily linked…

Social Cohesion as a Real-Life Phenomenon: Assessing the Explanatory Power of the Universalist and Particularist Perspectives

ERIC Educational Resources Information Center

Janmaat, Jan Germen

2011-01-01

Unlike most studies on social cohesion, this study explores the concept as a real-life macro-level phenomenon. It assesses to what extent the conceptions of social cohesion suggested by several macro-level approaches represent coherent empirically observable forms of social cohesion. Additionally it discusses two perspectives on social…

Results of initial analyses of the salt (macro) batch 9 tank 21H qualification samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T. B.

2015-10-01

Savannah River National Laboratory (SRNL) analyzed samples from Tank 21H in support of qualification of Interim Salt Disposition Project (ISDP) Salt (Macro) Batch 9 for processing through the Actinide Removal Process (ARP) and the Modular Caustic-Side Solvent Extraction Unit (MCU). This document reports the initial results of the analyses of samples of Tank 21H. Analysis of the Tank 21H Salt (Macro) Batch 9 composite sample indicates that the material does not display any unusual characteristics or observations, such as floating solids, the presence of large amount of solids, or unusual colors. Further results on the chemistry and other tests willmore » be issued in the future.« less

The evolution of PBMA: towards a macro-level priority setting framework for health regions.

PubMed

Mitton, Craig R; Donaldson, Cam; Waldner, Howard; Eagle, Chris

2003-11-01

To date, relatively little work on priority setting has been carried out at a macro-level across major portfolios within integrated health care organizations. This paper describes a macro marginal analysis (MMA) process for setting priorities and allocating resources in health authorities, based on work carried out in a major urban health region in Alberta, Canada. MMA centers around an expert working group of managers and clinicians who are charged with identifying areas for resource re-allocation on an ongoing basis. Trade-offs between services are based on locally defined criteria and are informed by multiple inputs such as evidence from the literature and local expert opinion. The approach is put forth as a significant improvement on historical resource allocation patterns.

A microstructural model of motion of macro-twin interfaces in Ni-Mn-Ga 10 M martensite

NASA Astrophysics Data System (ADS)

Seiner, Hanuš; Straka, Ladislav; Heczko, Oleg

2014-03-01

We present a continuum-based model of microstructures forming at the macro-twin interfaces in thermoelastic martensites and apply this model to highly mobile interfaces in 10 M modulated Ni-Mn-Ga martensite. The model is applied at three distinct spatial scales observed in the experiment: meso-scale (modulation twinning), micro-scale (compound a-b lamination), and nano-scale (nanotwining in the concept of adaptive martensite). We show that two mobile interfaces (Type I and Type II macro-twins) have different micromorphologies at all considered spatial scales, which can directly explain their different twinning stress observed in experiments. The results of the model are discussed with respect to various experimental observations at all three considered spatial scales.

The Setting for the Crack Era: Macro Forces, Micro Consequences (1960-1992)†

PubMed Central

Dunlap, Eloise; Johnson, Bruce D.

2009-01-01

This article provides an overview of the social history leading up to the crack era, especially 1960 to the present. The central theme holds that several major macro social forces (e.g., economic decline, job loss, ghettoization, housing abandonment, homelessness) have disproportionately impacted on the inner-city economy. These forces have created micro consequences that have impacted directly on many inner-city residents and have increased levels of distress experienced by households, families, and individuals. Economic marginality has generated high levels of alcohol and other drug abuse as well as criminality, which are exemplified in this article by one inner-city household having an extensive family history exhibiting the chronic impacts of these macro forces and their micro consequences. PMID:1491281

CoCoMac 2.0 and the future of tract-tracing databases

PubMed Central

Bakker, Rembrandt; Wachtler, Thomas; Diesmann, Markus

2012-01-01

The CoCoMac database contains the results of several hundred published axonal tract-tracing studies in the macaque monkey brain. The combined results are used for constructing the macaque macro-connectome. Here we discuss the redevelopment of CoCoMac and compare it to six connectome-related projects: two online resources that provide full access to raw tracing data in rodents, a connectome viewer for advanced 3D graphics, a partial but highly detailed rat connectome, a brain data management system that generates custom connectivity matrices, and a software package that covers the complete pipeline from connectivity data to large-scale brain simulations. The second edition of CoCoMac features many enhancements over the original. For example, a search wizard is provided for full access to all tables and their nested dependencies. Connectivity matrices can be computed on demand in a user-selected nomenclature. A new data entry system is available as a preview, and is to become a generic solution for community-driven data entry in manually collated databases. We conclude with the question whether neuronal tracing will remain the gold standard to uncover the wiring of brains, thereby highlighting developments in human connectome construction, tracer substances, polarized light imaging, and serial block-face scanning electron microscopy. PMID:23293600

CoCoMac 2.0 and the future of tract-tracing databases.

PubMed

Bakker, Rembrandt; Wachtler, Thomas; Diesmann, Markus

2012-01-01

The CoCoMac database contains the results of several hundred published axonal tract-tracing studies in the macaque monkey brain. The combined results are used for constructing the macaque macro-connectome. Here we discuss the redevelopment of CoCoMac and compare it to six connectome-related projects: two online resources that provide full access to raw tracing data in rodents, a connectome viewer for advanced 3D graphics, a partial but highly detailed rat connectome, a brain data management system that generates custom connectivity matrices, and a software package that covers the complete pipeline from connectivity data to large-scale brain simulations. The second edition of CoCoMac features many enhancements over the original. For example, a search wizard is provided for full access to all tables and their nested dependencies. Connectivity matrices can be computed on demand in a user-selected nomenclature. A new data entry system is available as a preview, and is to become a generic solution for community-driven data entry in manually collated databases. We conclude with the question whether neuronal tracing will remain the gold standard to uncover the wiring of brains, thereby highlighting developments in human connectome construction, tracer substances, polarized light imaging, and serial block-face scanning electron microscopy.

Using the Fusion Proximal Area Method and Gravity Method to Identify Areas with Physician Shortages

PubMed Central

Xiong, Xuechen; Jin, Chao; Chen, Haile; Luo, Li

2016-01-01

Objectives This paper presents a geographic information system (GIS)-based proximal area method and gravity method for identifying areas with physician shortages. The innovation of this paper is that it uses the appropriate methods to discover each type of health resource and then integrates all these methods to assess spatial access to health resources using population distribution data. In this way, spatial access to health resources for an entire city can be visualized in one neat package, which can help health policy makers quickly comprehend realistic distributions of health resources at a macro level. Methods First, classify health resources according to the trade areas of the patients they serve. Second, apply an appropriate method to each different type of health resource to measure spatial access to those resources. Third, integrate all types of access using population distribution data. Results In case study of Shanghai with the fusion method, areas with physician shortages are located primarily in suburban districts, especially in district junction areas. The result suggests that the government of Shanghai should pay more attention to these areas by investing in new or relocating existing health resources. Conclusion The fusion method is demonstrated to be more accurate and practicable than using a single method to assess spatial access to health resources. PMID:27695105

Hybrid macro-micro fluidics system for a chip-based biosensor

NASA Astrophysics Data System (ADS)

Tamanaha, C. R.; Whitman, L. J.; Colton, R. J.

2002-03-01

We describe the engineering of a hybrid fluidics platform for a chip-based biosensor system that combines high-performance microfluidics components with powerful, yet compact, millimeter-scale pump and valve actuators. The microfluidics system includes channels, valveless diffuser-based pumps, and pinch-valves that are cast into a poly(dimethylsiloxane) (PDMS) membrane and packaged along with the sensor chip into a palm-sized plastic cartridge. The microfluidics are driven by pump and valve actuators contained in an external unit (with a volume ~30 cm3) that interfaces kinematically with the PDMS microelements on the cartridge. The pump actuator is a simple-lever, flexure-hinge displacement amplifier that increases the motion of a piezoelectric stack. The valve actuators are an array of cantilevers operated by shape memory alloy wires. All components can be fabricated without the need for complex lithography or micromachining, and can be used with fluids containing micron-sized particulates. Prototypes have been modeled and tested to ensure the delivery of microliter volumes of fluid and the even dispersion of reagents over the chip sensing elements. With this hybrid approach to the fluidics system, the biochemical assay benefits from the many advantages of microfluidics yet we avoid the complexity and unknown reliability of immature microactuator technologies.

PKSolver: An add-in program for pharmacokinetic and pharmacodynamic data analysis in Microsoft Excel.

PubMed

Zhang, Yong; Huo, Meirong; Zhou, Jianping; Xie, Shaofei

2010-09-01

This study presents PKSolver, a freely available menu-driven add-in program for Microsoft Excel written in Visual Basic for Applications (VBA), for solving basic problems in pharmacokinetic (PK) and pharmacodynamic (PD) data analysis. The program provides a range of modules for PK and PD analysis including noncompartmental analysis (NCA), compartmental analysis (CA), and pharmacodynamic modeling. Two special built-in modules, multiple absorption sites (MAS) and enterohepatic circulation (EHC), were developed for fitting the double-peak concentration-time profile based on the classical one-compartment model. In addition, twenty frequently used pharmacokinetic functions were encoded as a macro and can be directly accessed in an Excel spreadsheet. To evaluate the program, a detailed comparison of modeling PK data using PKSolver and professional PK/PD software package WinNonlin and Scientist was performed. The results showed that the parameters estimated with PKSolver were satisfactory. In conclusion, the PKSolver simplified the PK and PD data analysis process and its output could be generated in Microsoft Word in the form of an integrated report. The program provides pharmacokinetic researchers with a fast and easy-to-use tool for routine and basic PK and PD data analysis with a more user-friendly interface. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

Integration of g4tools in Geant4

NASA Astrophysics Data System (ADS)

Hřivnáčová, Ivana

2014-06-01

g4tools, that is originally part of the inlib and exlib packages, provides a very light and easy to install set of C++ classes that can be used to perform analysis in a Geant4 batch program. It allows to create and manipulate histograms and ntuples, and write them in supported file formats (ROOT, AIDA XML, CSV and HBOOK). It is integrated in Geant4 through analysis manager classes, thus providing a uniform interface to the g4tools objects and also hiding the differences between the classes for different supported output formats. Moreover, additional features, such as for example histogram activation or support for Geant4 units, are implemented in the analysis classes following users requests. A set of Geant4 user interface commands allows the user to create histograms and set their properties interactively or in Geant4 macros. g4tools was first introduced in the Geant4 9.5 release where its use was demonstrated in one basic example, and it is already used in a majority of the Geant4 examples within the Geant4 9.6 release. In this paper, we will give an overview and the present status of the integration of g4tools in Geant4 and report on upcoming new features.

Impacts of discarded plastic bags on marine assemblages and ecosystem functioning.

PubMed

Green, Dannielle Senga; Boots, Bas; Blockley, David James; Rocha, Carlos; Thompson, Richard

2015-05-05

The accumulation of plastic debris is a global environmental problem due to its durability, persistence, and abundance. Although effects of plastic debris on individual marine organisms, particularly mammals and birds, have been extensively documented (e.g., entanglement and choking), very little is known about effects on assemblages and consequences for ecosystem functioning. In Europe, around 40% of the plastic items produced are utilized as single-use packaging, which rapidly accumulate in waste management facilities and as litter in the environment. A range of biodegradable plastics have been developed with the aspiration of reducing the persistence of litter; however, their impacts on marine assemblages or ecosystem functioning have never been evaluated. A field experiment was conducted to assess the impact of conventional and biodegradable plastic carrier bags as litter on benthic macro- and meio-faunal assemblages and biogeochemical processes (primary productivity, redox condition, organic matter content, and pore-water nutrients) on an intertidal shore near Dublin, Ireland. After 9 weeks, the presence of either type of bag created anoxic conditions within the sediment along with reduced primary productivity and organic matter and significantly lower abundances of infaunal invertebrates. This indicates that both conventional and biodegradable bags can rapidly alter marine assemblages and the ecosystem services they provide.

Shuffled Cards, Messy Desks, and Disorderly Dorm Rooms - Examples of Entropy Increase? Nonsense!

NASA Astrophysics Data System (ADS)

Lambert, Frank L.

1999-10-01

The order of presentation in this article is unusual; its conclusion is first. This is done because the title entails text and lecture examples so familiar to all teachers that most may find a preliminary discussion redundant. Conclusion The dealer shuffling cards in Monte Carlo or Las Vegas, the professor who mixes the papers and books on a desk, the student who tosses clothing about his or her room, the fuel for the huge cranes and trucks that would be necessary to move the nonbonded stones of the Great Pyramid of Cheops all across Egypteach undergoes physical, thermodynamic entropy increase in these specific processes. The thermodynamic entropy change from human-defined order to disorder in the giant Egyptian stones themselves, in the clothing and books in a room or papers on a desk, and in the millions of cards in the world's casinos is precisely the same: Zero. K. G. Denbigh succinctly summarizes the case against identifying changes in position in one macro object or in a group with physical entropy change (1): If one wishes to substantiate a claim or a guess that some particular process involves a change of thermodynamic or statistical entropy, one should ask oneself whether there exists a reversible heat effect, or a change in the number of accessible energy eigenstates, pertaining to the process in question. If not, there has been no change of physical entropy (even though there may have been some change in our "information"). Thus, simply changing the location of everyday macro objects from an arrangement that we commonly judge as orderly (relatively singular) to one that appears disorderly (relatively probable) is a "zero change" in the thermodynamic entropy of the objects because the number of accessible energetic microstates in any of them has not been changed. Finally, although it may appear obvious, a collection of ordinary macro things does not constitute a thermodynamic system as does a group of microparticles. The crucial difference is that such things are not ceaselessly colliding and exchanging energy under the thermal dominance of their environment as are microparticles. A postulate can be derived from this fundamental criterion: The movement of macro objects from one location to another by an external agent involves no change in the objects' physical (thermodynamic) entropy. The agent of movement undergoes a thermodynamic entropy increase in the process. A needed corollary, considering the number of erroneous statements in print, is: There is no spontaneous tendency in groups of macro objects to become disorderly or randomly scattered. The tendency in nature toward increased entropy does not reside in the arrangement of any chemically unchanging objects but rather in the external agent moving them. It is the sole cause of their transport toward more probable locations. The Error There is no more widespread error in chemistry and physics texts than the identification of a thermodynamic entropy increase with a change in the pattern of a group of macro objects. The classic example is that of playing cards. Shuffling a new deck is widely said to result in an increase in entropy in the cards. This erroneous impression is often extended to all kinds of things when they are changed from humanly designated order to what is commonly considered disorder: a group of marbles to scattered marbles, racked billiard balls to a broken rack, neat groups of papers on a desk to the more usual disarray. In fact, there is no thermodynamic entropy change in the objects in the "after" state compared to the "before". Further, such alterations in arrangement have been used in at least one text to support a "law" that is stated, "things move spontaneously in the direction of maximum chaos or disorder".1 The foregoing examples and "law" seriously mislead the student by focusing on macro objects that are only a passive part of a system. They are deceptive in omitting the agent that actually is changed in entropy as it follows the second lawthat is, whatever energy source is involved in the process of moving the static macro objects to more probable random locations. Entropy is increased in the shuffler's and in the billiard cue holder's muscles, in the tornado's wind and the earthquake's stressnot in the objects shifted. Chemically unchanged macro things do not spontaneously, by some innate tendency, leap or even slowly lurch toward visible disorder. Energy concentrated in the ATP of a person's muscles or in wind or in earth-stress is ultimately responsible for moving objects and is partly degraded to diffuse thermal energy as a result. Discussion To discover the origin of this text and lecture error, a brief review of some aspects of physical entropy is useful. Of course, the original definition of Clausius, dS = Dq(rev)/T, applies to a system plus its surroundings, and the Gibbsian relation of pertains to a system at constant pressure and constant temperature. Only in the present discussion (where an unfortunate term, information "entropy", must be dealt with) would it be necessary to emphasize that temperature is integral to any physical thermodynamic entropy change described via Clausius or Gibbs. In our era we are surer even than they could be that temperature is indispensable in understanding thermodynamic entropy because it indicates the thermal environment of microparticles in a system. That environment sustains the intermolecular motions whereby molecules continuously interchange energy and are able to access the wide range of energetic microstates available to them. It is this ever-present thermal motion that makes spontaneous change possible, even at constant temperature and in the absence of chemical reaction, because it is the mechanism whereby molecules can occupy new energetic microstates if the boundaries of a system are altered. Prime examples of such spontaneous change are diffusion in fluids and the expansion of gases into vacua, both fundamentally due to the additional translational energetic microstates in the enlarged systems. (Of course, spontaneous endothermic processes ranging from phase changes to chemical reactions are also due to mobile energy-transferring microparticles that can access new rotational and vibrational as well as translational energetic microstatesin the thermal surroundings as well as in the chemical system.) Misinterpretation of the Boltzmann equation for entropy change, ln(number of energetic microstates after change/number of energetic microstates before change), is the source of much of the confusion regarding the behavior of macro objects. R, the gas constant, embeds temperature in Boltzmann's entropy as integrally as in the Clausius or Gibbs relation and, to repeat, the environment's temperature indicates the degree of energy dispersion that makes access to available energy microstates possible. The Boltzmann equation is revelatory in uniting the macrothermodynamics of classic Clausian entropy with what has been described above as the behavior of a system of microparticles occupying energetic microstates. In discussing how probability enters the Boltzmann equation (i.e., the number of possible energetic microstates and their occupancy by microparticles), texts and teachers often enumerate the many ways a few symbolic molecules can be distributed on lines representing energy levels, or in similar cells or boxes, or with combinations of playing cards. Of course these are good analogs for depicting an energetic microsystem. However, even if there are warnings by the instructor, the use of playing cards as a model is probably intellectually hazardous; these objects are so familiar that the student can too easily warp this macro analog of a microsystem into an example of actual entropic change in the cards. Another major source of confusion about entropy change as the result of simply rearranging macro objects comes from information theory "entropy".2 Claude E. Shannon's 1948 paper began the era of quantification of information and in it he adopted the word "entropy" to name the quantity that his equation defined (2). This occurred because a friend, the brilliant mathematician John von Neumann, told him "call it entropy no one knows what entropy really is, so in a debate you will always have the advantage" (3). Wryly funny for that moment, Shannon's unwise acquiescence has produced enormous scientific confusion due to the increasingly widespread usefulness of his equation and its fertile mathematical variations in many fields other than communications (4, 5). Certainly most non-experts hearing of the widely touted information "entropy" would assume its overlap with thermodynamic entropy. However, the great success of information "entropy" has been in areas totally divorced from experimental chemistry, whose objective macro results are dependent on the behavior of energetic microparticles. Nevertheless, many instructors in chemistry have the impression that information "entropy" is not only relevant to the calculations and conclusions of thermodynamic entropy but may change them. This is not true. There is no invariant function corresponding to energy embedded in each of the hundreds of equations of information "entropy" and thus no analog of temperature universally present in them. In contrast, inherent in all thermodynamic entropy, temperature is the objective indicator of a system's energetic state. Probability distributions in information "entropy" represent human selections; therefore information "entropy" is strongly subjective. Probability distributions in thermodynamic entropy are dependent on the microparticulate and physicochemical nature of the system; limited thereby, thermodynamic entropy is strongly objective. This is not to say that the extremely general mathematics of information theory cannot be modified ad hoc and further specifically constrained to yield results that are identical to Gibbs' or Boltzmann's relations (6). This may be important theoretically but it is totally immaterial here; such a modification simply supports conventional thermodynamic results without changing themno lesser nor any greater thermodynamic entropy. The point is that information "entropy" in all of its myriad nonphysicochemical forms as a measure of information or abstract communication has no relevance to the evaluation of thermodynamic entropy change in the movement of macro objects because such information "entropy" does not deal with microparticles whose perturbations are related to temperature.3 Even those who are very competent chemists and physicists have become confused when they have melded or mixed information "entropy" in their consideration of physical thermodynamic entropy. This is shown by the results in textbooks and by the lectures of professors found on the Internet.1 Overall then, how did such an error (concerning entropy changes in macro objects that are simply moved) become part of mainstream instruction, being repeated in print even by distinguished physicists and chemists? The modern term for distorting a photograph, morphing, is probably the best answer. Correct statements of statistical thermodynamics have been progressively altered so that their dependence on the energetics of atoms and molecules is obliterated for the nonprofessional reader and omitted by some author-scientists. The morphing process can be illustrated by the sequence of statements 1 to 4 below.

1. Isolated systems of atoms and molecules spontaneously tend to occupy all available energetic microstates thermally accessible to them and tend to change to any arrangement or macro state that provides more such microstates. Thus, spontaneous change is toward a condition of greater probability of energy dispersion. After a spontaneous change, the logarithm of the ratio of the number of available microstates to those in the prior state is related to the system's increase in entropy by a constant, R/N per mole. It is the presence of temperature in R that distinguishes physical entropy from all information "entropy".
2. Systems of atoms and molecules spontaneously tend to go from a less probable state in which they are relatively "orderly" (few microstates, low entropy) to one that is more probable in which they are "disorderly" (many microstates, high entropy).
3. Spontaneous (natural) processes go from order to disorder and entropy increases. Order is what we see as neat, patterned. Disorder is what we see as messy, random.
4. Things naturally become disorderly.

1. Singling out individual authors from many could appear invidious. Thus, references to quotations or errors are not listed.
2. It is important that information "entropy" always be in quotes whenever thermodynamic entropy is mentioned in the same article or book. Otherwise, the unfortunate confusion of the past half-century is amplified rather than attenuated.
3. It has been said that an information "entropy" equationcompared to those for thermodynamic entropymay look like a duck but, without any empowering thermal energy, it can't quack like a duck or walk like a duck.

1. Denbigh, K. G. Br. J. Philos. Sci. 1989, 40, 323-332.
2. Shannon, C. E. Bell System Tech. J. 1948, 27, 329-423, 623-656.
3. Tribus, M.; McIrvine, E. C. Sci. Am. 1971, 225, 180.
4. Including: Golembiewski, R. T. Handbook of Organizational Behavior; Dekker: New York, 1993.
5. Hillman, C. Entropy on the World Wide Web; http://www.math.washington.edu/~hillman/entropy.html. Extensive references to print and WWW sites, primarily information "entropy" but thermodynamic entropy in the physical sciences in http://www.math.washington.edu/~hillman/Entropy/phys.html (The "e" in entropy is case sensitive in these two URLs.). A European mirror site (via China) is at http://www.unibas.ch/mdpi/entropy (accessed June 1999).
6. Tribus, M. Am. Sci. 1966, 54, 201-210.

Seasonal and Spatial Variations of Macro Benthos in the Intertidal Mudflat of Southern Yellow River Delta, China in 2007/2008

NASA Astrophysics Data System (ADS)

Zou, Li; Yao, Xiao; Yamaguchi, Hitomi; Guo, Xinyu; Gao, Huiwang; Wang, Kai; Sun, Mingyi

2018-04-01

In order to examine the seasonal and spatial distributions of benthic animals in the intertidal mudflat of the southern Yellow River Delta, field investigations were carried out in 2007 and 2008 and multiple methods were applied. Results showed that, the biomass of macro benthos ranged at 0.75-1151.00 g wet m-2 and averaged at 156.31 g wet m-2, in which Mactra veneriformis accounted for 75.6%-93.4% of the total macro benthic biomass. More than 90% of macro benthos inhabited in the middle and low tide lines, and higher biomass occurred in early summer and lower in winter. Statistical analysis showed that: 1) M. veneriformis growth was primarily favored at higher temperature and lower salinity; 2) after long time interaction, benthic bivalve grazers led to patching distributions of Chlorophyll a (Chl a); 3) macro benthic biomass positively related with Chl a when the concentration of Chl a was low, but they were negatively related when Chl a concentration was high; and 4) furthermore, the biomass of benthic bivalves peaked in the sediment with median grain size about 0.55 mm, but decreased gradually in coarse or fine sediments. The secondary productivity ranged at 0.37-283.68 g m-2yr-1 and averaged at 47.88 g m-2 yr-1, in which 69.7% was contributed by M. veneriformis It was estimated that primary production was transformed to secondary production at a rate of 6.87% approximately, which implies that there is a local sustainability of high bivalve production.

Dental Implant Macro-Design Features Can Impact the Dynamics of Osseointegration.

PubMed

Vivan Cardoso, Marcio; Vandamme, Katleen; Chaudhari, Amol; De Rycker, Judith; Van Meerbeek, Bart; Naert, Ignace; Duyck, Joke

2015-08-01

The purpose of this study was to compare the clinical performance of two dental implant types possessing a different macro-design in the in vivo pig model. Titanium Aadva(TM) implants (GC, Tokyo, Japan) were compared with OsseoSpeed(TM) implants (Astra, Mölndal, Sweden), with the Aadva implant displaying significant larger inter-thread dimensions than the OsseoSpeed implant. Implants were installed in the parietal bone of 12 domestic pigs and left for healing for either 1 or 3 months. Implant osseointegration was evaluated by quantitative histology (bone volume relative to the tissue volume [BV/TV]; bone-to-implant contact [BIC]) for distinct implant regions (collar, body, total implant length) with specific implant thread features. The Wilcoxon-Mann-Whitney nonparametric test with α = 0.05 was performed. An inferior amount of bone enveloping the Aadva implant compared with the OsseoSpeed implant was observed, in particular at the implant body part with its considerable inter-thread gaps (p < .05). Concomitantly, the Aadva macro-design negatively affected the amount of bone in direct contact with the implant for this specific implant part (p < .05), and resulted in an overall impaired implant osseointegration at the initial healing stage (total implant length; 1-month healing; p < .05). Although the Aadva implant displayed a clinically acceptable level of osseointegration, the findings demonstrate that implant macro-design features can impact the dynamics of implant osseointegration. Consideration of specific implant macro-design features should be made relative to the biological and mechanical microenvironment. © 2013 Wiley Periodicals, Inc.

The Validation of Macro and Micro Observations of Parent–Child Dynamics Using the Relationship Affect Coding System in Early Childhood

PubMed Central

Mun, Chung Jung; Tein, Jenn-Yun; Kim, Hanjoe; Shaw, Daniel S.; Gardner, Frances; Wilson, Melvin N.; Peterson, Jenene

2018-01-01

This study examined the validity of micro social observations and macro ratings of parent–child interaction in early to middle childhood. Seven hundred and thirty-one families representing multiple ethnic groups were recruited and screened as at risk in the context of Women, Infant, and Children (WIC) Nutritional Supplement service settings. Families were randomly assigned to the Family Checkup (FCU) intervention or the control condition at age 2 and videotaped in structured interactions in the home at ages 2, 3, 4, and 5. Parent–child interaction videotapes were microcoded using the Relationship Affect Coding System (RACS) that captures the duration of two mutual dyadic states: positive engagement and coercion. Macro ratings of parenting skills were collected after coding the videotapes to assess parent use of positive behavior support and limit setting skills (or lack thereof). Confirmatory factor analyses revealed that the measurement model of macro ratings of limit setting and positive behavior support was not supported by the data, and thus, were excluded from further analyses. However, there was moderate stability in the families’ micro social dynamics across early childhood and it showed significant improvements as a function of random assignment to the FCU. Moreover, parent–child dynamics were predictive of chronic behavior problems as rated by parents in middle childhood, but not emotional problems. We conclude with a discussion of the validity of the RACS and on methodological advantages of micro social coding over the statistical limitations of macro rating observations. Future directions are discussed for observation research in prevention science. PMID:27620623

Black-boxing and cause-effect power

PubMed Central

Albantakis, Larissa; Tononi, Giulio

2018-01-01

Reductionism assumes that causation in the physical world occurs at the micro level, excluding the emergence of macro-level causation. We challenge this reductionist assumption by employing a principled, well-defined measure of intrinsic cause-effect power–integrated information (Φ), and showing that, according to this measure, it is possible for a macro level to “beat” the micro level. Simple systems were evaluated for Φ across different spatial and temporal scales by systematically considering all possible black boxes. These are macro elements that consist of one or more micro elements over one or more micro updates. Cause-effect power was evaluated based on the inputs and outputs of the black boxes, ignoring the internal micro elements that support their input-output function. We show how black-box elements can have more common inputs and outputs than the corresponding micro elements, revealing the emergence of high-order mechanisms and joint constraints that are not apparent at the micro level. As a consequence, a macro, black-box system can have higher Φ than its micro constituents by having more mechanisms (higher composition) that are more interconnected (higher integration). We also show that, for a given micro system, one can identify local maxima of Φ across several spatiotemporal scales. The framework is demonstrated on a simple biological system, the Boolean network model of the fission-yeast cell-cycle, for which we identify stable local maxima during the course of its simulated biological function. These local maxima correspond to macro levels of organization at which emergent cause-effect properties of physical systems come into focus, and provide a natural vantage point for scientific inquiries. PMID:29684020

The Validation of Macro and Micro Observations of Parent-Child Dynamics Using the Relationship Affect Coding System in Early Childhood.

PubMed

Dishion, Thomas J; Mun, Chung Jung; Tein, Jenn-Yun; Kim, Hanjoe; Shaw, Daniel S; Gardner, Frances; Wilson, Melvin N; Peterson, Jenene

2017-04-01

This study examined the validity of micro social observations and macro ratings of parent-child interaction in early to middle childhood. Seven hundred and thirty-one families representing multiple ethnic groups were recruited and screened as at risk in the context of Women, Infant, and Children (WIC) Nutritional Supplement service settings. Families were randomly assigned to the Family Checkup (FCU) intervention or the control condition at age 2 and videotaped in structured interactions in the home at ages 2, 3, 4, and 5. Parent-child interaction videotapes were micro-coded using the Relationship Affect Coding System (RACS) that captures the duration of two mutual dyadic states: positive engagement and coercion. Macro ratings of parenting skills were collected after coding the videotapes to assess parent use of positive behavior support and limit setting skills (or lack thereof). Confirmatory factor analyses revealed that the measurement model of macro ratings of limit setting and positive behavior support was not supported by the data, and thus, were excluded from further analyses. However, there was moderate stability in the families' micro social dynamics across early childhood and it showed significant improvements as a function of random assignment to the FCU. Moreover, parent-child dynamics were predictive of chronic behavior problems as rated by parents in middle childhood, but not emotional problems. We conclude with a discussion of the validity of the RACS and on methodological advantages of micro social coding over the statistical limitations of macro rating observations. Future directions are discussed for observation research in prevention science.

Anthropological Approaches to the Study of Housing Areas: Lessons from Oaxaca City, Mexico.

ERIC Educational Resources Information Center

Murphy, Arthur D.

The anthropological study of the city's role in the evolution of human systems requires the use of both macro and micro levels of analysis. From the macro perspective, the city is viewed as part of a wider complex society, while from the micro point of view, the city provides the context for understanding specific human institutions or processes…

Portfolio Practices in Higher Education in Norway in an International Perspective: Macro-, Meso- and Micro-Level Influences

ERIC Educational Resources Information Center

Dysthe, Olga; Engelsen, Knut Steinar

2011-01-01

The point of departure for this article is the "chameleon" aspect of portfolios and the diversity of portfolio models and practices in higher education on the international arena today. Our aim is to investigate the contextual character of this diversity by using Norwegian higher education as an example and to show how macro-level…

EFL Teacher Identity: Impact of Macro and Micro Contextual Factors in Education Reform Frame in Chile

ERIC Educational Resources Information Center

Salinas, Danisa

2017-01-01

The research aims at exploring how macro and micro contextual factors have influenced on the construction of English as a foreign language (EFL) teachers' identity in education reform contexts in Chile based on sociocultural theories. Grounded theory was used in the methodological design to analyse and categorize data utilizing the ATLAS.ti…

Investigating Saudi Learners' Preferences for Giving and Receiving Macro and/or Micro Level Peer Feedback on Their Writing

ERIC Educational Resources Information Center

Alnasser, Suliman Mohammed; Alyousef, Hesham Suleiman

2015-01-01

Several studies have addressed the subject of the preferences of L2 student-writers for receiving teacher feedback (FB) on macro level features (feedback related to meaning) and micro level features (feedback related to surface level issues); however, none of these have investigated their preferences when it comes to giving and receiving peer…

Contemporary Macro-Issues in Human Work Organizations--Agenda for the Scientist-Practitioner in Organizational Communication.

ERIC Educational Resources Information Center

Keenan, James J.

This paper presents a brief survey of several contemporary macro-issues in human work organizations as context for--and part of the work of--scientists-practitioners in organizational communication. A special attempt has been made to identify concerns or issues--called "TransIssues" for the purposes of this paper--that appear to cut across two…

Teaching Note--Tweeting Macro Practice: Social Media in the Social Work Classroom

ERIC Educational Resources Information Center

Teixeira, Samantha; Hash, Kristina M.

2017-01-01

Despite its ubiquity, social work educators are just beginning to harness social media in teaching. In this teaching note, we discuss our use of Twitter in a bachelor's-level macro Human Behavior in the Social Environment course. We present results from a survey of 45 students designed to assess their perceptions of Twitter use in the classroom…

Language-in-Education Planning: The Use of Emergent Web 2.0 Genres in the South of Italy

ERIC Educational Resources Information Center

Sindoni, Maria Grazia

2009-01-01

This paper analyses the rationale for the creation of multimedia texts, in the context of learning English in an economically and socially depressed context. Issues of implementation of macro-level language policies in a local context are particularly stringent when the macro-level approach is rendered impracticable for some reason (e.g. cost,…

Nondestructive chemical imaging of wood at the micro-scale: advanced technology to complement macro-scale evaluations

Treesearch

Barbara L. Illman; Julia Sedlmair; Miriam Unger; Carol Hirschmugl

2013-01-01

Chemical images help understanding of wood properties, durability, and cell wall deconstruction for conversion of lignocellulose to biofuels, nanocellulose and other value added chemicals in forest biorefineries. We describe here a new method for nondestructive chemical imaging of wood and wood-based materials at the micro-scale to complement macro-scale methods based...

The Singapore Experience: Synergy of National Policy, Classroom Practice and Design Research

ERIC Educational Resources Information Center

Looi, Chee-Kit; So, Hyo-Jeong; Toh, Yancy; Chen, Wenli

2011-01-01

In recent years there has been a proliferation of research findings on CSCL at the micro and macro levels, but few compelling examples of how CSCL research has impacted actual classroom practices at the meso-level have emerged. This paper critically examines the impact of adopting a systemic approach to innovative education reforms at the macro,…

Contextual Influences on the Role of Evidence in Health Policy Development: What Can We Learn from Six Policies in India and Nigeria?

ERIC Educational Resources Information Center

Mirzoev, Tolib; Das, Mahua; Ebenso, Bassey; Uzochukwu, Benjamin; Rawat, Bindiya; Blok, Lucie; Russo, Giuliano; Thepthien, Bang-On; Huss, Reinhard

2017-01-01

This study explored macro, meso and micro-level influences on the role of evidence in the development of six health policies in India and Nigeria. Macro-level influences included adoption of international agreements, movement towards evidence-informed policymaking, committed country leadership and resource environment. At meso level, national…

Piezoelectric Energy Harvesting: A Green and Clean Alternative for Sustained Power Production

ERIC Educational Resources Information Center

Cook-Chennault, Kimberly Ann; Thambi, Nithya; Bitetto, Mary Anne; Hameyie, E. B.

2008-01-01

Providing efficient and clean power is a challenge for devices that range from the micro to macro in scale. Although there has been significant progress in the development of micro-, meso-, and macro-scale power supplies and technologies, realization of many devices is limited by the inability of power supplies to scale with the diminishing sizes…

The Role of the Company in Generating Skills. The Learning Effects of Work Organization. The Netherlands.

ERIC Educational Resources Information Center

Onstenk, Jeroen; Voncken, Eva

The impact of developments in work organizations on the skilling process in the Netherlands was studied through a macro analysis of available statistical information about the development of education for work in the Netherlands and case studies of three Dutch firms. The macro analysis focused on the following: vocational education in the…

Public Investments in Training: Perspectives on Macro-Level Structural Issues and Micro-Level Delivery Systems. EQW Working Papers WP24.

ERIC Educational Resources Information Center

Cascio, Wayne F.

Training issues can be examined from at least two perspectives: the structural level (macro-level) and the micro-level. Structural issues in the delivery of training include the following: absent or uneven corporate commitment, inadequate expenditures by businesses, degrees awarded by schools that do not guarantee skill mastery, poaching of…

Social Change, Competition and Inequality: Macro Societal Patterns Reflected in Curriculum Practices of Turkish Schools

ERIC Educational Resources Information Center

Somel, Rahsan Nazli; Nohl, Arnd-Michael

2015-01-01

Curriculum reforms provide a unique opportunity to investigate how in times of social change education is not only influenced by, but also itself a driver of, competition and inequality. This article sheds light on a specific instance of how macro-societal patterns in education intermingle in twenty-first century Turkey by inquiring into a major…

Impacts of coronary artery eccentricity on macro-recirculation and pressure drops using computational fluid dynamics

NASA Astrophysics Data System (ADS)

Poon, Eric; Thondapu, Vikas; Barlis, Peter; Ooi, Andrew

2017-11-01

Coronary artery disease remains a major cause of mortality in developed countries, and is most often due to a localized flow-limiting stenosis, or narrowing, of coronary arteries. Patients often undergo invasive procedures such as X-ray angiography and fractional flow reserve to diagnose flow-limiting lesions. Even though such diagnostic techniques are well-developed, the effects of diseased coronary segments on local flow are still poorly understood. Therefore, this study investigated the effect of irregular geometries of diseased coronary segments on the macro-recirculation and local pressure minimum regions. We employed an idealized coronary artery model with a diameter of stenosis of 75%. By systematically adjusting the eccentricity and the asymmetry of the coronary stenosis, we uncovered an increase in macro-recirculation size. Most importantly, the presence of this macro-recirculation signifies a local pressure minimum (identified by λ2 vortex identification method). This local pressure minimum has a profound effect on the pressure drops in both longitudinal and planar directions, which has implications for diagnosis and treatment of coronary artery disease. Supported by Australian Research Council LP150100233 and National Computational Infrastructure m45.

Impacts of macro - and microplastic on macrozoobenthos abundance in intertidal zone

NASA Astrophysics Data System (ADS)

Bangun, A. P.; Wahyuningsih, H.; Muhtadi, A.

2018-02-01

Plastics pollution in coastal areas is one of the topics that have received more attention over the past few years. The intertidal zone is a waters area that is directly affected by contamination of plastic waste from land and sea. The purpose of this study was to analyze the types and abundance of plastic waste in the intertidal zone and its impact on macrozoobenthos abundance. This research was conducted at Pesisir Desa Jaring Halus in February-April 2017. Macrozoobenthos and macro - micro plastic were collected by using quadratic transect. Sediments were collected with a core, to a depth of 30 cm. Microplastic and macroplastic abundances were analyzed using separation of sediment density and hand sorting. The dominant micro plastic types were film (52.30%), fiber (24.88%), fragments (22.74%), followed by pellets (0.1%). The total number of microplastics were 326,33 items and macro plastic were 308 items. Macroplastic abundance is positively correlated with microplastic (0.765). The abundance of macrozoobenthos is negatively correlated with microplastic abundance (-0.368) and with macro plastic abundance (-0.633). The management strategies were suggested clean up marine debris, decrease plastic using and built up the station of debris processing.

[Heath and political regimes: presidential or parliamentary government for Colombia?].

PubMed

Idrovo, Alvaro J

2007-01-01

Changing the presidential regime for a parliamentarian one is currently be-ing discussed in Colombia. This preliminary study explores the potential effects on health of both presidential and parliamentary regimes by using world-wide data. An ecological study was undertaken using countries from which comparable information concerning life-expectancy at birth, political regime, economic development, inequality in income, social capital (as measured by general-ised trust or Corruption Perceptions Index), political rights, civil freedom and cultural diversity could be obtained. Life-expectancy at birth and macro-determinants were compared between both political regimes. The co-relationship between these macro-determinants was estimated and the relationship between political regimen and life-expectancy at birth was estimated using robust regression. Crude analysis revealed that parliamentary countries have greater life-expectancy at birth than countries having a presidential regime. Significant co-relationships between all macro-determinants were observed. No differential effects were observed between both political regimes regarding life-expectancy at birth in multiple robust regressions. There is no evidence that presidential or parliamentary regimes provide greater levels of health for the population. It is suggested that public health policies be focused on other macro-determinants having more known effects on health, such as income inequality.

Metacognitive Analysis of Pre-Service Teachers of Chemistry in Posting Questions

NASA Astrophysics Data System (ADS)

Santoso, T.; Yuanita, L.

2017-04-01

Questions addressed to something can induce metacognitive function to monitor a person’s thinking process. This study aims to describe the structure of the level of student questions based on thinking level and chemistry understanding level and describe how students use their metacognitive knowledge in asking. This research is a case study in chemistry learning, followed by 87 students. Results of the analysis revealed that the structure of thinking level of student question consists of knowledge question, understanding and application question, and high thinking question; the structure of chemistry understanding levels of student questions are a symbol, macro, macro-micro, macro-process, micro-process, and the macro-micro-process. The level Questioning skill of students to scientific articles more qualified than the level questioning skills of students to the teaching materials. The analysis result of six student interviews, a student question demonstrate the metacognitive processes with categories: (1) low-level metacognitive process, which is compiled based on questions focusing on a particular phrase or change the words; (2) intermediate level metacognitive process, submission of questions requires knowledge and understanding, and (3) high-level metacognitive process, the student questions posed based on identifying the central topic or abstraction essence of scientific articles.

Searching regional rainfall homogeneity using atmospheric fields

NASA Astrophysics Data System (ADS)

Gabriele, Salvatore; Chiaravalloti, Francesco

2013-03-01

The correct identification of homogeneous areas in regional rainfall frequency analysis is fundamental to ensure the best selection of the probability distribution and the regional model which produce low bias and low root mean square error of quantiles estimation. In an attempt at rainfall spatial homogeneity, the paper explores a new approach that is based on meteo-climatic information. The results are verified ex-post using standard homogeneity tests applied to the annual maximum daily rainfall series. The first step of the proposed procedure selects two different types of homogeneous large regions: convective macro-regions, which contain high values of the Convective Available Potential Energy index, normally associated with convective rainfall events, and stratiform macro-regions, which are characterized by low values of the Q vector Divergence index, associated with dynamic instability and stratiform precipitation. These macro-regions are identified using Hot Spot Analysis to emphasize clusters of extreme values of the indexes. In the second step, inside each identified macro-region, homogeneous sub-regions are found using kriging interpolation on the mean direction of the Vertically Integrated Moisture Flux. To check the proposed procedure, two detailed examples of homogeneous sub-regions are examined.

Long-working-distance fluorescence microscope with high-numerical-aperture objectives for variable-magnification imaging in live mice from macro- to subcellular

NASA Astrophysics Data System (ADS)

Kimura, Hiroaki; Momiyama, Masashi; Tomita, Katsuro; Tsuchiya, Hiroyuki; Hoffman, Robert M.

2010-11-01

We demonstrate the development of a long-working-distance fluorescence microscope with high-numerical-aperture objectives for variable-magnification imaging in live mice from macro- to subcellular. To observe cytoplasmic and nuclear dynamics of cancer cells in the living mouse, 143B human osteosarcoma cells are labeled with green fluorescent protein in the nucleus and red fluorescent protein in the cytoplasm. These dual-color cells are injected by a vascular route in an abdominal skin flap in nude mice. The mice are then imaged with the Olympus MVX10 macroview fluorescence microscope. With the MVX10, the nuclear and cytoplasmic behavior of cancer cells trafficking in blood vessels of live mice is observed. We also image lung metastases in live mice from the macro- to the subcellular level by opening the chest wall and imaging the exposed lung in live mice. Injected splenocytes, expressing cyan fluorescent protein, could also be imaged on the lung of live mice. We demonstrate that the MVX10 microscope offers the possibility of full-range in vivo fluorescence imaging from macro- to subcellular and should enable widespread use of powerful imaging technologies enabled by genetic reporters and other fluorophores.

CFD Extraction Tool for TecPlot From DPLR Solutions

NASA Technical Reports Server (NTRS)

Norman, David

2013-01-01

This invention is a TecPlot macro of a computer program in the TecPlot programming language that processes data from DPLR solutions in TecPlot format. DPLR (Data-Parallel Line Relaxation) is a NASA computational fluid dynamics (CFD) code, and TecPlot is a commercial CFD post-processing tool. The Tec- Plot data is in SI units (same as DPLR output). The invention converts the SI units into British units. The macro modifies the TecPlot data with unit conversions, and adds some extra calculations. After unit conversions, the macro cuts a slice, and adds vectors on the current plot for output format. The macro can also process surface solutions. Existing solutions use manual conversion and superposition. The conversion is complicated because it must be applied to a range of inter-related scalars and vectors to describe a 2D or 3D flow field. It processes the CFD solution to create superposition/comparison of scalars and vectors. The existing manual solution is cumbersome, open to errors, slow, and cannot be inserted into an automated process. This invention is quick and easy to use, and can be inserted into an automated data-processing algorithm.

A macro-enzyme cause of an isolated increase of alkaline phosphatase.

PubMed

Cervinski, Mark A; Lee, Hong Kee; Martin, Isabella W; Gavrilov, Dimitar K

2015-02-02

Macroenzyme complexes of serum enzymes and antibody can increase the circulating enzymatic activity and may lead to unnecessary additional testing and procedures. Laboratory physicians and scientists need to be aware of techniques to identify macroenzyme complexes when suspected. To investigate the possibility of a macro-alkaline phosphatase in the serum of a 74 year old male with persistently increased alkaline phosphatase we coupled a protein A/G agarose affinity chromatography technique with isoenzyme electrophoresis to look for the presence of macro-alkaline phosphatase. The majority of the alkaline phosphatase activity in the patient's serum sample was bound to the column and only a minor fraction (25%) of alkaline phosphatase activity was present in the column flow-through. The alkaline phosphatase activity was also found to co-elute with the immunoglobulins in the patient sample. The alkaline phosphatase activity in a control serum sample concurrently treated in the same manner did not bind to the column and was found in the column flow-through. The use of protein A/G agarose affinity chromatography is a rapid and simple method that can be applied to the investigation of other macro-enzyme complexes. Copyright © 2014 Elsevier B.V. All rights reserved.

Decoupled macro/micro-manipulator for fast and precise assembly operations: design and experiments

NASA Astrophysics Data System (ADS)

Hodac, Agathe; Siegwart, Roland Y.

1999-08-01

This paper presents a high performance single arm robot configuration, based on a macro-manipulator coupled with a micro-manipulator. The system is well suited to fast and precise positioning tasks for repetitive pick and place applications in the manufacturing industry. Firstly, the paper focuses on the design of the micro-manipulator, particularly on the selection of the proper micro-actuator type and location. We show that the micro-manipulator's design with an actuator placed between endpoint and ground and with a flexible suspension system can reduce the dynamic coupling between the macro-manipulator and the micro- manipulator. The overall system performance can then be improved. We describe two different designs of compact and fast micro-manipulators composed of voice coil actuators and a monolithic flexure suspension with notch hinges. Secondly, the paper presents a control strategy that allows both correction of possible misalignments of the end-effector relative to the target and compensation of tip oscillations. The dynamic interaction is analyzed and stability is verified. Finally, experimental results demonstrate significant improvements in acceleration, endpoint accuracy and settling time achieved by the novel configuration of the macro/micro-manipulator.

Enhanced MicroChannel Heat Transfer in Macro-Geometry using Conventional Fabrication Approach

NASA Astrophysics Data System (ADS)

Ooi, KT; Goh, AL

2016-09-01

This paper presents studies on passive, single-phase, enhanced microchannel heat transfer in conventionally sized geometry. The intention is to allow economical, simple and readily available conventional fabrication techniques to be used for fabricating macro-scale heat exchangers with microchannel heat transfer capability. A concentric annular gap between a 20 mm diameter channel and an 19.4 mm diameter insert forms a microchannel where heat transfer occurs. Results show that the heat transfer coefficient of more than 50 kW/m·K can be obtained for Re≈4,000, at hydraulic diameter of 0.6 mm. The pressure drop values of the system are kept below 3.3 bars. The present study re-confirms the feasibility of fabricating macro-heat exchangers with microchannel heat transfer capability.

Laser speckle contrast imaging of cerebral autoregulation in rats at a macro- and microcirculation level

NASA Astrophysics Data System (ADS)

Semyachkina-Glushkovskaya, O. V.; Abdurashitov, A. S.; Sindeev, S. S.; Tuchin, V. V.

2016-06-01

Using the method of laser speckle imaging for the simultaneous study of macro- and microcirculation in cerebral vessels of healthy rats, we show that the mechanisms underlying cerebral autoregulation depend on the initial condition of the organism and the sex of individual animals. The pharmacological dose-dependent stimulation of the peripheral arterial pressure increase is not accompanied by the cerebral circulation responses of analogous intensity, but manifests itself as 'compensating' reactions, namely, the redistribution of the blood flow at the level of macro- (in females) and microcirculation (in females and males). The obtained results extend our understanding of the capabilities of laser speckle imaging technique in neurophysiological studies of reserve abilities of cerebral circulation autoregulation under the conditions of hypertensive status formation.

Search for nucleon decays induced by GUT magnetic monopoles with the MACRO experiment

NASA Astrophysics Data System (ADS)

Ambrosio, M.; Antolini, R.; Auriemma, G.; Bakari, D.; Baldini, A.; Barbarino, G. C.; Barish, B. C.; Battistoni, G.; Becherini, Y.; Bellotti, R.; Bemporad, C.; Bernardini, P.; Bilokon, H.; Bloise, C.; Bower, C.; Brigida, M.; Bussino, S.; Cafagna, F.; Calicchio, M.; Campana, D.; Carboni, M.; Caruso, R.; Cecchini, S.; Cei, F.; Chiarella, V.; Choudhary, B. C.; Coutu, S.; Cozzi, M.; de Cataldo, G.; Dekhissi, H.; de Marzo, C.; de Mitri, I.; Derkaoui, J.; de Vincenzi, M.; di Credico, A.; Erriquez, O.; Favuzzi, C.; Forti, C.; Fusco, P.; Giacomelli, G.; Giannini, G.; Giglietto, N.; Giorgini, M.; Grassi, M.; Grillo, A.; Guarino, F.; Gustavino, C.; Habig, A.; Hanson, K.; Heinz, R.; Iarocci, E.; Katsavounidis, E.; Katsavounidis, I.; Kearns, E.; Kim, H.; Kyriazopoulou, S.; Lamanna, E.; Lane, C.; Levin, D. S.; Lipari, P.; Longley, N. P.; Longo, M. J.; Loparco, F.; Maaroufi, F.; Mancarella, G.; Mandrioli, G.; Manzoor, S.; Margiotta, A.; Marini, A.; Martello, D.; Marzari-Chiesa, A.; Mazziotta, M. N.; Michael, D. G.; Monacelli, P.; Montaruli, T.; Monteno, M.; Mufson, S.; Musser, J.; Nicolò, D.; Nolty, R.; Orth, C.; Osteria, G.; Palamara, O.; Patera, V.; Patrizii, L.; Pazzi, R.; Peck, C. W.; Perrone, L.; Petrera, S.; Pistilli, P.; Popa, V.; Rainò, A.; Reynoldson, J.; Ronga, F.; Rrhioua, A.; Satriano, C.; Scapparone, E.; Scholberg, K.; Sciubba, A.; Serra, P.; Sioli, M.; Sirri, G.; Sitta, M.; Spinelli, P.; Spinetti, M.; Spurio, M.; Steinberg, R.; Stone, J. L.; Sulak, L. R.; Surdo, A.; Tarlè, G.; Togo, V.; Vakili, M.; Walter, C. W.; Webb, R.

2002-12-01

The interaction of a Grand Unification Magnetic Monopole with a nucleon can lead to a barion-number violating process in which the nucleon decays into a lepton and one or more mesons (catalysis of nucleon decay). In this paper we report an experimental study of the effects of a catalysis process in the MACRO detector. Using a dedicated analysis we obtain new magnetic monopole (MM) flux upper limits at the level of \\char1263\\cdot 10^{-16} cm^{-2} s^{-1} sr^{-1} for 1.1\\cdot 10^{-4} le \\vertβ\\vert le 5\\cdot 10^{-3}, based on the search for catalysis events in the MACRO data. We also analyze the dependence of the MM flux limit on the catalysis cross section.

Results of initial analyses of the salt (macro) batch 10 tank 21H qualification samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T. B.

2017-01-01

Savannah River National Laboratory (SRNL) analyzed samples from Tank 21H in support of qualification of Interim Salt Disposition Project (ISDP) Salt (Macro) Batch 10 for processing through the Actinide Removal Process (ARP) and the Modular Caustic-Side Solvent Extraction Unit (MCU). This document reports the initial results of the analyses of samples of Tank 21H. Analysis of the Tank 21H Salt (Macro) Batch 10 composite sample indicates that the material does not display any unusual characteristics or observations, such as floating solids, the presence of large amount of solids, or unusual colors. Further sample results will be reported in a futuremore » document. This memo satisfies part of Deliverable 3 of the Technical Task Request (TTR).« less

[Age and gender characteristics of the content of macro- and trace elements in the organisms of the children from the European North].

PubMed

Soroko, S I; Maksimova, I A; Protasova, O V

2014-01-01

By means of the nuclear-emission spectral analysis with inductively connected argon plasma were studied the contents of 28 macro- and trace elements (Al, Ag, Li, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, In, K, Mg, Mn, Na, Ni, Mo, P, Zn, Se, Tl, Pb, Sr, S, Si) in the hair of children and teenagers living in the European North of the Russian Federation (Arkhangelsk region). There were revealed both: decrease and increase of some elements' contents. Also were revealed the dynamics of mentioned elements contents in the hair of the same children in different years. Significant individual variability of the macro and trace elements' status of children-northerners and some gender dependence were revealed.

Robust variance estimation with dependent effect sizes: practical considerations including a software tutorial in Stata and spss.

PubMed

Tanner-Smith, Emily E; Tipton, Elizabeth

2014-03-01

Methodologists have recently proposed robust variance estimation as one way to handle dependent effect sizes in meta-analysis. Software macros for robust variance estimation in meta-analysis are currently available for Stata (StataCorp LP, College Station, TX, USA) and spss (IBM, Armonk, NY, USA), yet there is little guidance for authors regarding the practical application and implementation of those macros. This paper provides a brief tutorial on the implementation of the Stata and spss macros and discusses practical issues meta-analysts should consider when estimating meta-regression models with robust variance estimates. Two example databases are used in the tutorial to illustrate the use of meta-analysis with robust variance estimates. Copyright © 2013 John Wiley & Sons, Ltd.

Results of initial analyses of the salt (macro) batch 11 Tank 21H qualification samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T. B.

Savannah River National Laboratory (SRNL) analyzed samples from Tank 21H in support of qualification of Interim Salt Disposition Project (ISDP) Salt (Macro) Batch 11 for processing through the Actinide Removal Process (ARP) and the Modular Caustic-Side Solvent Extraction Unit (MCU). This document reports the initial results of the analyses of samples of Tank 21H. Analysis of the Tank 21H Salt (Macro) Batch 11 composite sample indicates that the material does not display any unusual characteristics or observations, such as floating solids, the presence of large amounts of solids, or unusual colors. Further sample results will be reported in a futuremore » document. This memo satisfies part of Deliverable 3 of the Technical Task Request (TTR).« less

Modeling Manganese Silicate Inclusion Composition Changes during Ladle Treatment Using FactSage Macros

NASA Astrophysics Data System (ADS)

Piva, Stephano P. T.; Kumar, Deepoo; Pistorius, P. Chris

2017-02-01

This work investigated the use of FactSage macros to simulate steel-slag and steel-inclusion reaction kinetics in silicon-manganese killed steels, and predict oxide inclusion composition changes during ladle treatment. These changes were assessed experimentally using an induction furnace to simulate deoxidation and slag addition. The average steel mass transfer coefficient for the experimental setup was calculated from the analyzed aluminum pick-up by steel. Average oxide inclusion composition was measured using scanning electron microscopy and energy-dispersive X-ray spectroscopy. Confocal laser scanning microscopy was used to assess the physical state (solid or liquid) of oxide inclusions in selected samples. The changes in the chemical compositions of the oxide inclusions and the steel agreed with the FactSage macro simulations.

Monitoring multi-year macro ocean litter dynamics and backward-tracking simulation of litter origins on a remote island in the South China Sea

NASA Astrophysics Data System (ADS)

Ko, Chia-Ying; Hsin, Yi-Chia; Yu, Teng-Lang; Liu, Kuo-Lieh; Shiah, Fuh-Kwo; Jeng, Ming-Shiou

2018-04-01

Ocean litter has accumulated rapidly and is becoming a major environmental concern, yet quantitative and regular observations and exploration that track litter origins are limited. By implementing monthly sample collections over five years (2012–2016) at Dongsha Island, a remote island in the northern South China Sea (SCS), we assessed macro ocean litter dynamics, identified source countries of individual plastic bottles, and analyzed the origins of the litter by a backward-tracking model simulation considering both the effects of current velocity and windage. The results showed that large amounts of litter, which varied monthly and annually in weight and quantity, reached the island during the study years, and there were spatial differences in accumulation patterns between the north and south coasts. Styrofoam and plastic bottles were the two primary sources of macro ocean litter both annually and monthly, and most of the litter collected on the island originated from China and Vietnam, which were collectively responsible for approximately 47.5%–63.7% per month. The simulation indicated that current advection at the near-surface depths and low windage at the sea surface showed similar patterns, while medium to high windage exhibited comparable expression patterns in response to potential source regions and drifting time experiments. At either the surface with low windage or current advection at depths of 0.5 m and 1 m, macro ocean litter in the Western Philippine Sea, i.e. through the Luzon Strait between Taiwan and the Philippines, was an important contributor to the litter bulk from October to March, whereas the litter was predicted to mainly originate from the southwestern SCS from April to September. With an increasing windage effect, litter in the Taiwan Strait was predicted to be an additional major potential source. Surprisingly, a small proportion of the macro ocean litter was predicted to continuously travel in the northern SCS for a long duration (> 2 years) before drifting onto Dongsha Island. The estimated drifting time of macro ocean litter also showed monthly and directional variability. This study demonstrated that a tremendous quantity of macro ocean litter, which may cause great damage to the marine ecosystem, drifts in the ocean surface layer and is finally pushed onto beaches. Therefore, we proposed an action plan for effective ocean litter management development at regional and global spatial scales, which is vital for improving and restoring the health and sustainability of the oceanic environment.

Using a Social Science--Fictional Play to Teach about Global Capitalism and Macro-Structural Systems in Introduction to Sociology

ERIC Educational Resources Information Center

Pelak, Cynthia Fabrizio; Duncan, Stacey

2017-01-01

This article explores the use of a social science-fictional play to teach macro-structural concepts related to global capitalism and surplus labor in a small and large Introduction to Sociology course. Relying on a cross-disciplinary and critical pedagogical approach that combines theory and practice to empower students to develop a critical…

Economic value of big game habitat production from natural and prescribed fire

Treesearch

Armando Gonzalez-Caban; John B. Loomis; Dana Griffin; Elen Wu; Daniel McCollum; Jane McKeever; Diane Freeman

2003-01-01

A macro time-series model and a micro GIS model were used to estimate a production function relating deer harvest response to prescribed fire, holding constant other environmental variables. The macro time-series model showed a marginal increase in deer harvested of 33 for an increase of 1,100 acres of prescribed burn. The marginal deer increase for the micro GIS model...

"We Can't Let Them Fail for One More Day": School Reform Urgency and the Politics of Reformer-Community Alliances

ERIC Educational Resources Information Center

Gordon, Hava Rachel

2016-01-01

This article provides a critical examination of neoliberal urgency in education reform. While critics of neoliberal reform policies have argued that these reforms exclude low-income community participation almost entirely, I argue that in practice this exclusion is not as total or as overt as macro-analyses would suggest. These macro analyses do…

The Role of the Company in Generating Skills. The Learning Effects of Work Organization in the United Kingdom.

ERIC Educational Resources Information Center

Walsh, Kenneth; Green, Andy; Steedman, Hilary

The impact of developments in work organizations on the skilling process in the United Kingdom was studied through a macro analysis of available statistical information about the development of workplace training in the United Kingdom and case studies of three U.K. firms. The macro analysis focused on the following: initial training arrangements;…

Workshop summary: Physical properties of gas hydrate-bearing sediment

USGS Publications Warehouse

Waite, William F.; Santamarina, J.C.

2008-01-01

A wide range of particle and pore scale phenomena, often coupled, determines the macro-scale response of gas-hydrate bearing sediment to changes in mechanical, thermal, or chemical conditions. Predicting this macro-scale response is critical for applications such as optimizing the production of methane from gas-hydrate deposits, or determining the role of gas hydrates in global carbon cycling and climate change.

School-Level Genetic Variation Predicts School-Level Verbal IQ Scores: Results from a Sample of American Middle and High Schools

ERIC Educational Resources Information Center

Beaver, Kevin M.; Wright, John Paul

2011-01-01

Research has consistently revealed that average IQ scores vary significantly across macro-level units, such as states and nations. The reason for this variation in IQ, however, has remained at the center of much controversy. One of the more provocative explanations is that IQ across macro-level units is the result of genetic differences, but…

Implications of Time Adjustments at Micro, Macro and Meso Levels in Undergraduate and Graduate Piano Students' Performance

ERIC Educational Resources Information Center

dos Santos, Regina Antunes Teixeira; Gerling, Cristina Capparelli; de Bortoli, Álvaro Luiz

2017-01-01

A short piano piece was prepared by undergraduate and graduate piano students (N = 15) without guidance from their piano teachers. Temporal parameters were analyzed in several time frames, from a phrase-to-phrase level to an interonset interval. At a macro level, local tempo was shown to be a crucial parameter that divided the students into two…

A Macro-Level Analysis of SRL Processes and Their Relations to the Acquisition of a Sophisticated Mental Model of a Complex System

ERIC Educational Resources Information Center

Greene, Jeffrey Alan; Azevedo, Roger

2009-01-01

In this study, we used think-aloud verbal protocols to examine how various macro-level processes of self-regulated learning (SRL; e.g., planning, monitoring, strategy use, handling of task difficulty and demands) were associated with the acquisition of a sophisticated mental model of a complex biological system. Numerous studies examine how…

Model and Analytic Processes for Export License Assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, Sandra E.; Whitney, Paul D.; Weimar, Mark R.

2011-09-29

This paper represents the Department of Energy Office of Nonproliferation Research and Development (NA-22) Simulations, Algorithms and Modeling (SAM) Program's first effort to identify and frame analytical methods and tools to aid export control professionals in effectively predicting proliferation intent; a complex, multi-step and multi-agency process. The report focuses on analytical modeling methodologies that alone, or combined, may improve the proliferation export control license approval process. It is a follow-up to an earlier paper describing information sources and environments related to international nuclear technology transfer. This report describes the decision criteria used to evaluate modeling techniques and tools to determinemore » which approaches will be investigated during the final 2 years of the project. The report also details the motivation for why new modeling techniques and tools are needed. The analytical modeling methodologies will enable analysts to evaluate the information environment for relevance to detecting proliferation intent, with specific focus on assessing risks associated with transferring dual-use technologies. Dual-use technologies can be used in both weapons and commercial enterprises. A decision-framework was developed to evaluate which of the different analytical modeling methodologies would be most appropriate conditional on the uniqueness of the approach, data availability, laboratory capabilities, relevance to NA-22 and Office of Arms Control and Nonproliferation (NA-24) research needs and the impact if successful. Modeling methodologies were divided into whether they could help micro-level assessments (e.g., help improve individual license assessments) or macro-level assessment. Macro-level assessment focuses on suppliers, technology, consumers, economies, and proliferation context. Macro-level assessment technologies scored higher in the area of uniqueness because less work has been done at the macro level. An approach to developing testable hypotheses for the macro-level assessment methodologies is provided. The outcome of this works suggests that we should develop a Bayes Net for micro-level analysis and continue to focus on Bayes Net, System Dynamics and Economic Input/Output models for assessing macro-level problems. Simultaneously, we need to develop metrics for assessing intent in export control, including the risks and consequences associated with all aspects of export control.« less

An ethnographic exploration of influences on prescribing in general practice: why is there variation in prescribing practices?

PubMed

Grant, Aileen; Sullivan, Frank; Dowell, Jon

2013-06-21

Prescribing is a core activity for general practitioners, yet significant variation in the quality of prescribing has been reported. This suggests there may be room for improvement in the application of the current best research evidence. There has been substantial investment in technologies and interventions to address this issue, but effect sizes so far have been small to moderate. This suggests that prescribing is a decision-making process that is not sufficiently understood. By understanding more about prescribing processes and the implementation of research evidence, variation may more easily be understood and more effective interventions proposed. An ethnographic study in three Scottish general practices with diverse organizational characteristics. Practices were ranked by their performance against Audit Scotland prescribing quality indicators, incorporating established best research evidence. Two practices of high prescribing quality and one practice of low prescribing quality were recruited. Participant observation, formal and informal interviews, and a review of practice documentation were employed. Practices ranked as high prescribing quality consistently made and applied macro and micro prescribing decisions, whereas the low-ranking practice only made micro prescribing decisions. Macro prescribing decisions were collective, policy decisions made considering research evidence in light of the average patient, one disease, condition, or drug. Micro prescribing decisions were made in consultation with the patient considering their views, preferences, circumstances and other conditions (if necessary).Although micro prescribing can operate independently, the implementation of evidence-based, quality prescribing was attributable to an interdependent relationship. Macro prescribing policy enabled prescribing decisions to be based on scientific evidence and applied consistently where possible. Ultimately, this influenced prescribing decisions that occur at the micro level in consultation with patients. General practitioners in the higher prescribing quality practices made two different 'types' of prescribing decision; macro and micro. Macro prescribing informs micro prescribing and without a macro basis to draw upon the low-ranked practice had no effective mechanism to engage with, reflect on and implement relevant evidence. Practices that recognize these two levels of decision making about prescribing are more likely to be able to implement higher quality evidence.

An ethnographic exploration of influences on prescribing in general practice: why is there variation in prescribing practices?

PubMed Central

2013-01-01

Background Prescribing is a core activity for general practitioners, yet significant variation in the quality of prescribing has been reported. This suggests there may be room for improvement in the application of the current best research evidence. There has been substantial investment in technologies and interventions to address this issue, but effect sizes so far have been small to moderate. This suggests that prescribing is a decision-making process that is not sufficiently understood. By understanding more about prescribing processes and the implementation of research evidence, variation may more easily be understood and more effective interventions proposed. Methods An ethnographic study in three Scottish general practices with diverse organizational characteristics. Practices were ranked by their performance against Audit Scotland prescribing quality indicators, incorporating established best research evidence. Two practices of high prescribing quality and one practice of low prescribing quality were recruited. Participant observation, formal and informal interviews, and a review of practice documentation were employed. Results Practices ranked as high prescribing quality consistently made and applied macro and micro prescribing decisions, whereas the low-ranking practice only made micro prescribing decisions. Macro prescribing decisions were collective, policy decisions made considering research evidence in light of the average patient, one disease, condition, or drug. Micro prescribing decisions were made in consultation with the patient considering their views, preferences, circumstances and other conditions (if necessary). Although micro prescribing can operate independently, the implementation of evidence-based, quality prescribing was attributable to an interdependent relationship. Macro prescribing policy enabled prescribing decisions to be based on scientific evidence and applied consistently where possible. Ultimately, this influenced prescribing decisions that occur at the micro level in consultation with patients. Conclusion General practitioners in the higher prescribing quality practices made two different ‘types’ of prescribing decision; macro and micro. Macro prescribing informs micro prescribing and without a macro basis to draw upon the low-ranked practice had no effective mechanism to engage with, reflect on and implement relevant evidence. Practices that recognize these two levels of decision making about prescribing are more likely to be able to implement higher quality evidence. PMID:23799906

Serum creatine kinase isoenzymes and macroenzymes in dogs with different neurologic diseases.

PubMed

Paltrinieri, Saverio; Pintore, Laura; Balducci, Federica; Giordano, Alessia; Costabile, Annaluce; Bernardini, Marco

2017-03-01

Increased serum activity of CK isoenzymes and macroenzymes, and in particular of the brain isoenzyme (CK-BB) has been reported in dogs with central nervous system (CNS) disorders. However, no studies on the possible differences in serum activities of CK iso- or macroenzymes (Macro-CK1 and Macro-CK2) in different neurologic diseases are available. The aim of this study was to describe the electrophoretic distribution of CK iso- and macroenzymes in dogs with CNS disorders in order to assess whether this distribution depends on a specific neurologic disease. This study was done on sera from 45 dogs with neurologic diseases (degenerative, n = 7; idiopathic epilepsy [IE], n = 14; inflammatory, n = 16; space occupying lesions [SOL], n = 8) and from 10 clinically healthy dogs. The separation of serum CK isoenzymes and macroenzymes was performed using an automated electrophoretic method already validated in dogs. Compared with healthy dogs, dogs with CNS disorders had significantly higher total CK and CK-BB activities, and a significantly lower Macro-CK2 activity (P < .001). Comparison of pathologic subgroups and healthy dogs revealed significant differences (P < .01) in dogs with IE and inflammatory disorders for total CK activity, in all the subgroups for CK-BB (P < .01), and in dogs with IE and SOL for Macro-CK2 (P < .01). The results of this study suggest that CK-BB is released by neurons damaged by inflammatory or degenerative conditions or due to compressive effects of SOL. However, the neurologic diseases cannot be differentiated based on CK-BB or Macro-CK2 activities, unless further studies allow the definition of diagnostic thresholds. © 2017 American Society for Veterinary Clinical Pathology.

Symbolic interactionism and critical perspective: divergent or synergistic?

PubMed

Burbank, Patricia M; Martins, Diane C

2010-01-01

Throughout their history, symbolic interactionism and critical perspective have been viewed as divergent theoretical perspectives with different philosophical underpinnings. A review of their historical and philosophical origins reveals both points of divergence and areas of convergence. Their underlying philosophies of science and views of human freedom are different as is their level of focus with symbolic interactionism having a micro perspective and critical perspective using a macro perspective. This micro/macro difference is reflected in the divergence of their major concepts, goals and basic tenets. While their underlying philosophies are different, however, they are not necessarily contradictory and areas of convergence may include the concepts of reference groups and looking glass self within symbolic interactionism and ideological hegemony within critical perspective. By using a pragmatic approach and combining symbolic interactionism and critical perspectives, both micro and macro levels come into focus and strategies for change across individual and societal levels can be developed and applied. Application of both symbolic interactionism and critical perspective to nursing research and scholarship offers exciting new opportunities for theory development and research methodologies. In nursing education, these two perspectives can give students added insight into patients' and families' problems at the micro level while, at the same time, giving them a lens to see and tools to apply to problems at the macro level in health care. In nursing practice, a combined symbolic interactionism/critical perspective approach assists nurses to give high-quality care at the individual level while also working at the macro level to address the manufacturers of illness. New research questions emerge from this combination of perspectives with new possibilities for theory development, a transformation in nursing education, and the potential for new practice strategies that can address individual client and larger system problems through empowerment of clients and nurses.

Acute limb heating improves macro- and microvascular dilator function in the leg of aged humans.

PubMed

Romero, Steven A; Gagnon, Daniel; Adams, Amy N; Cramer, Matthew N; Kouda, Ken; Crandall, Craig G

2017-01-01

Local heating of an extremity increases blood flow and vascular shear stress throughout the arterial tree. Local heating acutely improves macrovascular dilator function in the upper limbs of young healthy adults through a shear stress-dependent mechanism but has no such effect in the lower limbs of this age group. The effect of acute limb heating on dilator function within the atherosclerotic prone vasculature of the lower limbs of aged adults is unknown. Therefore, the purpose of this study was to test the hypothesis that acute lower limb heating improves macro- and microvascular dilator function within the leg vasculature of aged adults. Nine young and nine aged adults immersed their lower limbs at a depth of ~33 cm into a heated (~42°C) circulated water bath for 45 min. Before and 30 min after heating, macro (flow-mediated dilation)- and microvascular (reactive hyperemia) dilator functions were assessed in the lower limb, following 5 min of arterial occlusion, via Doppler ultrasound. Compared with preheat, macrovascular dilator function was unchanged following heating in young adults (P = 0.6) but was improved in aged adults (P = 0.04). Similarly, microvascular dilator function, as assessed by peak reactive hyperemia, was unchanged following heating in young adults (P = 0.1) but was improved in aged adults (P < 0.01). Taken together, these data suggest that acute lower limb heating improves both macro- and microvascular dilator function in an age dependent manner. We demonstrate that lower limb heating acutely improves macro- and microvascular dilator function within the atherosclerotic prone vasculature of the leg in aged adults. These findings provide evidence for a potential therapeutic use of chronic lower limb heating to improve vascular health in primary aging and various disease conditions. Copyright © 2017 the American Physiological Society.

The influence of the macro-environment on physical activity: a multilevel analysis of 38 countries worldwide

PubMed Central

2012-01-01

Background As indicated by the ANGELO framework and similar models, various environmental factors influence population levels of physical activity (PA). To date attention has focused on the micro-level environment, while evidence on the macro-level environment remains scarce and mostly limited to high-income countries. This study aims to investigate whether environmental factors at macro-level are associated with PA among a broader range of countries. Methods Data from the World Health Survey (WHS) was used to analyze 177,035 adults from 38 (mostly low and middle income) countries. The International Physical Activity Questionnaire-Short Form (IPAQ-S) was used to measure PA. Respondents were classified as active or inactive for vigorous PA, moderate PA and walking. Multilevel logistic regression was performed to assess associations between macro-level environmental factors and the prevalence of PA, with control for individual-level socioeconomic factors. Results The prevalence of PA varied widely between countries and types of PA (5.0%-93.8%). A negative association was found between gross domestic product and PA, odds ratios for men were 0.76 (95% CI: 0.65-0.89) for moderate PA and 0.79 (95% CI: 0.63-0.98) for walking. A higher temperature was associated with less PA (all types) and higher urbanization was associated with less vigorous and moderate PA. More gender equality was also associated with more walking for women. Governmental functioning and literacy rate were not found to be associated with any type of PA. Conclusions This exploratory study indicates that factors such as climate, economic development and cultural factors are determinants of the level of overall PA at national levels. This underlines the suggestion that the macro-environment should be regarded as an important influence on PA. PMID:22967164

A Variational Formulation of Macro-Particle Algorithms for Kinetic Plasma Simulations

NASA Astrophysics Data System (ADS)

Shadwick, B. A.

2013-10-01

Macro-particle based simulations methods are in widespread use in plasma physics; their computational efficiency and intuitive nature are largely responsible for their longevity. In the main, these algorithms are formulated by approximating the continuous equations of motion. For systems governed by a variational principle (such as collisionless plasmas), approximations of the equations of motion is known to introduce anomalous behavior, especially in system invariants. We present a variational formulation of particle algorithms for plasma simulation based on a reduction of the distribution function onto a finite collection of macro-particles. As in the usual Particle-In-Cell (PIC) formulation, these macro-particles have a definite momentum and are spatially extended. The primary advantage of this approach is the preservation of the link between symmetries and conservation laws. For example, nothing in the reduction introduces explicit time dependence to the system and, therefore, the continuous-time equations of motion exactly conserve energy; thus, these models are free of grid-heating. In addition, the variational formulation allows for constructing models of arbitrary spatial and temporal order. In contrast, the overall accuracy of the usual PIC algorithm is at most second due to the nature of the force interpolation between the gridded field quantities and the (continuous) particle position. Again in contrast to the usual PIC algorithm, here the macro-particle shape is arbitrary; the spatial extent is completely decoupled from both the grid-size and the ``smoothness'' of the shape; smoother particle shapes are not necessarily larger. For simplicity, we restrict our discussion to one-dimensional, non-relativistic, un-magnetized, electrostatic plasmas. We comment on the extension to the electromagnetic case. Supported by the US DoE under contract numbers DE-FG02-08ER55000 and DE-SC0008382.

150-μm Spatial Resolution Using Photon-Counting Detector Computed Tomography Technology: Technical Performance and First Patient Images.

PubMed

Leng, Shuai; Rajendran, Kishore; Gong, Hao; Zhou, Wei; Halaweish, Ahmed F; Henning, Andre; Kappler, Steffen; Baer, Matthias; Fletcher, Joel G; McCollough, Cynthia H

2018-05-28

The aims of this study were to quantitatively assess two new scan modes on a photon-counting detector computed tomography system, each designed to maximize spatial resolution, and to qualitatively demonstrate potential clinical impact using patient data. This Health Insurance Portability Act-compliant study was approved by our institutional review board. Two high-spatial-resolution scan modes (Sharp and UHR) were evaluated using phantoms to quantify spatial resolution and image noise, and results were compared with the standard mode (Macro). Patients were scanned using a conventional energy-integrating detector scanner and the photon-counting detector scanner using the same radiation dose. In first patient images, anatomic details were qualitatively evaluated to demonstrate potential clinical impact. Sharp and UHR modes had a 69% and 87% improvement in in-plane spatial resolution, respectively, compared with Macro mode (10% modulation-translation-function values of 16.05, 17.69, and 9.48 lp/cm, respectively). The cutoff spatial frequency of the UHR mode (32.4 lp/cm) corresponded to a limiting spatial resolution of 150 μm. The full-width-at-half-maximum values of the section sensitivity profiles were 0.41, 0.44, and 0.67 mm for the thinnest image thickness for each mode (0.25, 0.25, and 0.5 mm, respectively). At the same in-plane spatial resolution, Sharp and UHR images had up to 15% lower noise than Macro images. Patient images acquired in Sharp mode demonstrated better delineation of fine anatomic structures compared with Macro mode images. Phantom studies demonstrated superior resolution and noise properties for the Sharp and UHR modes relative to the standard Macro mode and patient images demonstrated the potential benefit of these scan modes for clinical practice.

The influence of the macro-environment on physical activity: a multilevel analysis of 38 countries worldwide.

PubMed

Bosdriesz, Jizzo R; Witvliet, Margot I; Visscher, Tommy L S; Kunst, Anton E

2012-09-11

As indicated by the ANGELO framework and similar models, various environmental factors influence population levels of physical activity (PA). To date attention has focused on the micro-level environment, while evidence on the macro-level environment remains scarce and mostly limited to high-income countries. This study aims to investigate whether environmental factors at macro-level are associated with PA among a broader range of countries. Data from the World Health Survey (WHS) was used to analyze 177,035 adults from 38 (mostly low and middle income) countries. The International Physical Activity Questionnaire-Short Form (IPAQ-S) was used to measure PA. Respondents were classified as active or inactive for vigorous PA, moderate PA and walking. Multilevel logistic regression was performed to assess associations between macro-level environmental factors and the prevalence of PA, with control for individual-level socioeconomic factors. The prevalence of PA varied widely between countries and types of PA (5.0%-93.8%). A negative association was found between gross domestic product and PA, odds ratios for men were 0.76 (95% CI: 0.65-0.89) for moderate PA and 0.79 (95% CI: 0.63-0.98) for walking. A higher temperature was associated with less PA (all types) and higher urbanization was associated with less vigorous and moderate PA. More gender equality was also associated with more walking for women. Governmental functioning and literacy rate were not found to be associated with any type of PA. This exploratory study indicates that factors such as climate, economic development and cultural factors are determinants of the level of overall PA at national levels. This underlines the suggestion that the macro-environment should be regarded as an important influence on PA.

Biochars derived from wasted marine macro-algae (Saccharina japonica and Sargassum fusiforme) and their potential for heavy metal removal in aqueous solution.

PubMed

Poo, Kyung-Min; Son, Eun-Bi; Chang, Jae-Soo; Ren, Xianghao; Choi, Yun-Jung; Chae, Kyu-Jung

2018-01-15

For the purpose of reusing wasted marine macro-algae generated during cultivation, harvesting, processing and selling processes, biochars derived from Saccharina japonica (known as kelp) and Sargassum fusiforme (known as hijikia) were characterized and their removal capacities for Cu, Cd, and Zn in aqueous solution were assessed. Feedstocks, S. japonica, S. fusiforme, and also pinewood sawdust as a control, were pyrolyzed at 250, 400, 500, 600 and 700 °C. In evaluating heavy metal removal capacities, SJB (S. japonica biochar) showed the best performance, with removal efficiencies of more than 98% for the three heavy metals when pyrolyzed at over 400 °C. SFB (S. fusiforme biochar) also showed good potential as an adsorbent, with removal efficiencies for the three heavy metals of more than 86% when pyrolyzed at over 500 °C. On the contrary, the maximum removal efficiencies of PSB (pinewood sawdust biochar) were 81%, 46%, and 47% for Cu, Cd, and Zn, respectively, even at 700 °C, the highest pyrolysis temperature. This demonstrates that marine macro-algae were advantageous in terms of production energy for removing heavy metals even at relatively low pyrolysis temperatures, compared with PSB. The excellent heavy metal adsorption capacities of marine macro-algae biochars were considered due to their higher pH and more oxygen-containing functional groups, although the specific surface areas of SJB and SFB were significantly lower than that of PSB. This research confirmed that the use of marine macro-algae as a heavy metal adsorbent was suitable not only in the removal of heavy metals, but also in terms of resource recycling and energy efficiency. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of lipid peroxidation, antioxidants, macro minerals and trace elements on eczema.

PubMed

Amin, Mohammad Nurul; Liza, Kaniz Fatema; Sarwar, Md Shahid; Ahmed, Jamiuddin; Adnan, Md Tareek; Chowdhury, Manjurul Islam; Hossain, Mohammad Zahid; Islam, Mohammad Safiqul

2015-09-01

The exact etiology and pathogenesis of eczema are not yet fully understood, although different factors are considered as pathogenic mechanisms in the development of eczema. Our study was designed to determine extent of serum lipid peroxidation, antioxidants, macro minerals and trace elements in patients with eczema, and thereby, find any pathophysiological correlation. The study was conducted as a case-control study with 65 eczema patients as cases and 65 normal healthy individuals as controls. Lipid peroxidation was assessed by measuring the serum level of malondialdehyde (MDA). Antioxidants- vitamin A and E concentration was determined by RP-HPLC method whereas vitamin C was evaluated for serum ascorbic acid by UV spectrophotometric method. Serum macro minerals (Na, K, Ca) and trace elements (Zn, Fe) were determined by Atomic Absorption Spectroscopy (AAS). This study found significantly higher level of MDA (p < 0.001) and lower level of antioxidants (p < 0.05) in patients in comparison to the control subjects. Analysis of serum macro minerals (Na, K and Ca) and trace elements (Zn, Fe) found that the mean values of Na, K, Ca, Zn and Fe were 2771.60 ± 75.64, 66.33 ± 3.03, 48.41 ± 2.50, 0.30 ± 0.02 and 0.29 ± 0.009 mg/L for the patient group and 3284.81 ± 34.51, 162.18 ± 3.72, 87.66 ± 2.10, 0.75 ± 0.06 and 0.87 ± 0.06 mg/L for the control group, accordingly. There was a significant difference for all the minerals between the patients and controls (p < 0.001). This study suggests a strong association between the pathogenesis of eczema with the elevated level of MDA and depleted level of antioxidants, macro minerals, and trace elements.

Elevated serum MDA and depleted non-enzymatic antioxidants, macro-minerals and trace elements are associated with bipolar disorder.

PubMed

Chowdhury, Manjurul Islam; Hasan, Maimuna; Islam, Mohammad Safiqul; Sarwar, Md Shahid; Amin, Mohammad Nurul; Uddin, S M Naim; Rahaman, Md Zahedur; Banik, Sujan; Hussain, Md Saddam; Yokota, Kazushige; Hasnat, Abul

2017-01-01

Genetic and neurobiological factors are considered to be the major causes of mood and mental disorders. However, over the past few years, increased levels of serum malondialdehyde and altered levels of various non-enzymatic antioxidants and essential minerals involved in abnormal functional activity have been identified as major contributing factors to the pathogenesis of several neurological disorders. The aim of this study was to determine the levels of the serum lipid peroxidation product malondialdehyde (MDA), antioxidants (vitamin A, E and C), macro-minerals (calcium, potassium and sodium) and trace elements (zinc, iron and selenium) in patients with bipolar disorder and to explore their role in disease progression. This is a prospective case-control study that evaluated 55 patients with bipolar disorder and 55 healthy volunteers matched by age and sex. Serum MDA levels were determined by UV spectrophotometry as a marker of lipid peroxidation. RP-HPLC was employed to investigate the serum vitamin A and E concentrations, whereas UV spectrophotometry was used to quantify levels of vitamin C. Serum macro-minerals and trace elements were analyzed by atomic absorption spectroscopy (AAS). Statistical analysis was performed with independent sample t-tests and Pearson's correlation test. We found significantly higher concentrations of MDA (p<0.05) and significantly lower concentrations of antioxidants (vitamin A, E and C) (p<0.05) in the patient group compared with control group. Regarding trace elements and macro-minerals, lower concentrations of zinc, calcium, iron, selenium, sodium and potassium were found in the patient group compared with control subjects (p<0.05). Our study suggests that high serum MDA concentrations and low serum concentrations of antioxidants, macro-minerals and trace elements are strongly associated with bipolar disorder. Copyright © 2016 Elsevier GmbH. All rights reserved.

Cell cycle, oncogenic and tumor suppressor pathways regulate numerous long and macro non-protein-coding RNAs

PubMed Central

2014-01-01

Background The genome is pervasively transcribed but most transcripts do not code for proteins, constituting non-protein-coding RNAs. Despite increasing numbers of functional reports of individual long non-coding RNAs (lncRNAs), assessing the extent of functionality among the non-coding transcriptional output of mammalian cells remains intricate. In the protein-coding world, transcripts differentially expressed in the context of processes essential for the survival of multicellular organisms have been instrumental in the discovery of functionally relevant proteins and their deregulation is frequently associated with diseases. We therefore systematically identified lncRNAs expressed differentially in response to oncologically relevant processes and cell-cycle, p53 and STAT3 pathways, using tiling arrays. Results We found that up to 80% of the pathway-triggered transcriptional responses are non-coding. Among these we identified very large macroRNAs with pathway-specific expression patterns and demonstrated that these are likely continuous transcripts. MacroRNAs contain elements conserved in mammals and sauropsids, which in part exhibit conserved RNA secondary structure. Comparing evolutionary rates of a macroRNA to adjacent protein-coding genes suggests a local action of the transcript. Finally, in different grades of astrocytoma, a tumor disease unrelated to the initially used cell lines, macroRNAs are differentially expressed. Conclusions It has been shown previously that the majority of expressed non-ribosomal transcripts are non-coding. We now conclude that differential expression triggered by signaling pathways gives rise to a similar abundance of non-coding content. It is thus unlikely that the prevalence of non-coding transcripts in the cell is a trivial consequence of leaky or random transcription events. PMID:24594072

Investigation of Micro- and Macro-Scale Transport Processes for Improved Fuel Cell Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gu, Wenbin

2014-08-29

This report documents the work performed by General Motors (GM) under the Cooperative agreement No. DE-EE0000470, “Investigation of Micro- and Macro-Scale Transport Processes for Improved Fuel Cell Performance,” in collaboration with the Penn State University (PSU), University of Tennessee Knoxville (UTK), Rochester Institute of Technology (RIT), and University of Rochester (UR) via subcontracts. The overall objectives of the project are to investigate and synthesize fundamental understanding of transport phenomena at both the macro- and micro-scales for the development of a down-the-channel model that accounts for all transport domains in a broad operating space. GM as a prime contractor focused onmore » cell level experiments and modeling, and the Universities as subcontractors worked toward fundamental understanding of each component and associated interface.« less

Clinimetrics and clinical psychometrics: macro- and micro-analysis.

PubMed

Tomba, Elena; Bech, Per

2012-01-01

Clinimetrics was introduced three decades ago to specify the domain of clinical markers in clinical medicine (indexes or rating scales). In this perspective, clinical validity is the platform for selecting the various indexes or rating scales (macro-analysis). Psychometric validation of these indexes or rating scales is the measuring aspect (micro-analysis). Clinical judgment analysis by experienced psychiatrists is included in the macro-analysis and the item response theory models are especially preferred in the micro-analysis when using the total score as a sufficient statistic. Clinical assessment tools covering severity of illness scales, prognostic measures, issues of co-morbidity, longitudinal assessments, recovery, stressors, lifestyle, psychological well-being, and illness behavior have been identified. The constructive dialogue in clinimetrics between clinical judgment and psychometric validation procedures is outlined for generating developments of clinical practice in psychiatry. Copyright © 2012 S. Karger AG, Basel.

The measurement of upward going muons using the MACRO detector.

NASA Astrophysics Data System (ADS)

Montaruli, T.

1999-01-01

The upward-going muon flux (Eμ > 1 GeV) has been measured with the underground detector MACRO at LNGS. The total number of measured events is compatible at the 8% c.l. with the expected one. Moreover, the zenith angular distribution of the measured flux does not match the expectation showing a deficit in the vertical direction where the apparatus performance is best known. Assuming an oscillation hypothesis with parameters in the range recently suggested to solve the atmospheric neutrino problem, the agreement increases, but not significantly. The results of an indirect dark matter search for a signal of WIMPs from the core of the Sun and of the Earth are given. Neutrino astronomy with MACRO is giving interesting results regarding possible high energy neutrino emission from pointlike sources and coincidences of neutrino events with γ-ray bursts.

Macro-evolutionary studies of cultural diversity: a review of empirical studies of cultural transmission and cultural adaptation.

PubMed

Mace, Ruth; Jordan, Fiona M

2011-02-12

A growing body of theoretical and empirical research has examined cultural transmission and adaptive cultural behaviour at the individual, within-group level. However, relatively few studies have tried to examine proximate transmission or test ultimate adaptive hypotheses about behavioural or cultural diversity at a between-societies macro-level. In both the history of anthropology and in present-day work, a common approach to examining adaptive behaviour at the macro-level has been through correlating various cultural traits with features of ecology. We discuss some difficulties with simple ecological associations, and then review cultural phylogenetic studies that have attempted to go beyond correlations to understand the underlying cultural evolutionary processes. We conclude with an example of a phylogenetically controlled approach to understanding proximate transmission pathways in Austronesian cultural diversity.

Macro-evolutionary studies of cultural diversity: a review of empirical studies of cultural transmission and cultural adaptation

PubMed Central

Mace, Ruth; Jordan, Fiona M.

2011-01-01

A growing body of theoretical and empirical research has examined cultural transmission and adaptive cultural behaviour at the individual, within-group level. However, relatively few studies have tried to examine proximate transmission or test ultimate adaptive hypotheses about behavioural or cultural diversity at a between-societies macro-level. In both the history of anthropology and in present-day work, a common approach to examining adaptive behaviour at the macro-level has been through correlating various cultural traits with features of ecology. We discuss some difficulties with simple ecological associations, and then review cultural phylogenetic studies that have attempted to go beyond correlations to understand the underlying cultural evolutionary processes. We conclude with an example of a phylogenetically controlled approach to understanding proximate transmission pathways in Austronesian cultural diversity. PMID:21199844

Macro Trends and the Future of Public Health Practice.

PubMed

Erwin, Paul Campbell; Brownson, Ross C

2017-03-20

Public health practice in the twenty-first century is in a state of significant flux. Several macro trends are impacting the current practice of governmental public health and will likely have effects for many years to come. These macro trends are described as forces of change, which are changes that affect the context in which the community and its public health system operate. This article focuses on seven such forces of change: the Patient Protection and Affordable Care Act, public health agency accreditation, climate change, health in all policies, social media and informatics, demographic transitions, and globalized travel. Following the description of each of these, this article then turns to possible approaches to measuring, tracking, and understanding the impact of these forces of change on public health practice, including the use of evidence-based public health, practice-based research, and policy surveillance.

Application of solid-acid catalyst and marine macro-algae Gracilaria verrucosa to production of fermentable sugars.

PubMed

Jeong, Gwi-Taek; Kim, Sung-Koo; Park, Don-Hee

2015-04-01

In this study, the hydrolysis of marine macro-algae Gracilaria verrucosa with a solid-acid catalyst was investigated. To optimize the hydrolysis, four reaction factors, including liquid-to-solid ratio, catalyst loading, reaction temperature, and reaction time, were investigated. In the results, the highest total reducing sugar (TRS) yield, 61 g/L (51.9%), was obtained under the following conditions: 1:7.5 solid-to-liquid ratio, 15% (w/v) catalyst loading, 140 °C reaction temperature, and 150 min reaction time. Under these conditions, 10.7 g/L of 5-HMF and 2.5 g/L of levulinic acid (LA) were generated. The application of solid-acid catalyst and marine macro-algae resources shows a very high potential for production of fermentable sugars. Copyright © 2015 Elsevier Ltd. All rights reserved.

siMacro: A Fast and Easy Data Processing Tool for Cell-Based Genomewide siRNA Screens.

PubMed

Singh, Nitin Kumar; Seo, Bo Yeun; Vidyasagar, Mathukumalli; White, Michael A; Kim, Hyun Seok

2013-03-01

Growing numbers of studies employ cell line-based systematic short interfering RNA (siRNA) screens to study gene functions and to identify drug targets. As multiple sources of variations that are unique to siRNA screens exist, there is a growing demand for a computational tool that generates normalized values and standardized scores. However, only a few tools have been available so far with limited usability. Here, we present siMacro, a fast and easy-to-use Microsoft Office Excel-based tool with a graphic user interface, designed to process single-condition or two-condition synthetic screen datasets. siMacro normalizes position and batch effects, censors outlier samples, and calculates Z-scores and robust Z-scores, with a spreadsheet output of >120,000 samples in under 1 minute.

siMacro: A Fast and Easy Data Processing Tool for Cell-Based Genomewide siRNA Screens

PubMed Central

Singh, Nitin Kumar; Seo, Bo Yeun; Vidyasagar, Mathukumalli; White, Michael A.

2013-01-01

Growing numbers of studies employ cell line-based systematic short interfering RNA (siRNA) screens to study gene functions and to identify drug targets. As multiple sources of variations that are unique to siRNA screens exist, there is a growing demand for a computational tool that generates normalized values and standardized scores. However, only a few tools have been available so far with limited usability. Here, we present siMacro, a fast and easy-to-use Microsoft Office Excel-based tool with a graphic user interface, designed to process single-condition or two-condition synthetic screen datasets. siMacro normalizes position and batch effects, censors outlier samples, and calculates Z-scores and robust Z-scores, with a spreadsheet output of >120,000 samples in under 1 minute. PMID:23613684

Integrated Substrate and Thin Film Design Methods

DTIC Science & Technology

1999-02-01

Proper Representation Once the required chemical databases had been converted to the Excel format, VBA macros were written to convert chemical...ternary systems databases were imported from MS Excel to MS Access to implement SQL queries. Further, this database was connected via an ODBC model, to the... VBA macro, corresponding to each of the elements A, B, and C, respectively. The B loop began with the next alphabetical choice of element symbols

Short-Term Energy Outlook Model Documentation: Macro Bridge Procedure to Update Regional Macroeconomic Forecasts with National Macroeconomic Forecasts

EIA Publications

2010-01-01

The Regional Short-Term Energy Model (RSTEM) uses macroeconomic variables such as income, employment, industrial production and consumer prices at both the national and regional1 levels as explanatory variables in the generation of the Short-Term Energy Outlook (STEO). This documentation explains how national macroeconomic forecasts are used to update regional macroeconomic forecasts through the RSTEM Macro Bridge procedure.

An Architecture for Enabling Migration of Tactical Networks to Future Flexible Ad Hoc WBWF

DTIC Science & Technology

2010-09-01

Requirements Several multiple access schemes TDMA OFDMA SC-OFDMA, FH- CDMA , DS - CDMA , hybrid access schemes, transitions between them Dynamic...parameters algorithms depend on the multiple access scheme If DS - CDMA : handling of macro-diversity (linked to cooperative routing) TDMA and/of OFDMA...Transport format Ciphering @MAC/RLC level : SCM Physical layer (PHY) : signal processing (mod, FEC, etc) CDMA : macro-diversity CDMA , OFDMA

Geomorphic Modeling of Macro-Tidal Embayment with Extensive Tidal Flats: Skagit Bay, Washington

DTIC Science & Technology

2011-09-30

tidal flats: Skagit Bay , Washington Lyle Hibler Battelle-Pacific Northwest Division Marine Sciences Laboratory Sequim , WA 98382 phone: (360) 681...3616 fax: (360) 681-4559 email: lyle.hibler@pnnl.gov Adam Maxwell Battelle-Pacific Northwest Division Marine Sciences Laboratory Sequim , WA...Geomorphic modeling of macro-tidal embayment with extensive tidal flats: Skagit Bay , Washington 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

Geomorphic Modeling of Macro-Tidal Embayment with Extensive Tidal Flats: Skagit Bay, Washington

DTIC Science & Technology

2010-09-30

Geomorphic modeling of macro-tidal embayment with extensive tidal flats: Skagit Bay , Washington Lyle Hibler Battelle-Pacific Northwest Division...Marine Sciences Laboratory Sequim , WA 98382 phone: (360) 681-3616 fax: (360) 681-4559 email: lyle.hibler@pnl.gov Adam Maxwell Battelle-Pacific...Northwest Division Marine Sciences Laboratory Sequim , WA 98382 phone: (360) 681-4591 fax: (360) 681-4559 email: adam.maxwell@pnl.gov Award

Substructure Discovery of Macro-Operators

DTIC Science & Technology

1988-05-01

Aspects of Scientific Discovery," in Machine Learning: An Artifcial Intelligence Approach, Vol. II. R. S. Michalski, J. G. Carbonell and T. M. Mitchell (ed... intelligent robot using this system could learn how to perform new tasks by watching tasks being performed by someone else. even if the robot does not possess...Substructure Discovery of Macro-Operators* Bradley L. Whitehall Artificial Intelligence Research Group Coordinated Science Laboratory ’University of Illinois at

Development of an Advanced Continuum Theory for Composite Laminates. Volume 1

DTIC Science & Technology

1993-12-31

defor- mation, degradation, aging, and other processes. These process are "multidisciplinary" in every sense, and the mechanics, chemistry ...3 representation of the strain field in discrete layer laminates and allowing accurate determination of ply level stresses. During the course of this...macro-structures were examined and the rela- ŗ tionship between strain measures at micro- and macro- levels were derived. The field equations for

Uptake of macro- and micro-nutrients into leaf, woody, and root tissue of Populus after irrigation with landfill leachate

Treesearch

Jill A. Zalesny; Ronald S., Jr. Zalesny; Adam H. Wiese; Bart T. Sexton; Richard B. Hall

2008-01-01

Information about macro- and micro-nutrient uptake and distribution into tissues of Populus irrigated with landfill leachate helps to maximize biomass production and understand impacts of leachate chemistry on tree health. We irrigated eight Populus clones (NC 13460, NCI4O18, NC14104, NC14106, DM115, DN5, NM2, NM6) with fertilized (N, P, K) well...

Force user's manual, revised

NASA Technical Reports Server (NTRS)

Jordan, Harry F.; Benten, Muhammad S.; Arenstorf, Norbert S.; Ramanan, Aruna V.

1987-01-01

A methodology for writing parallel programs for shared memory multiprocessors has been formalized as an extension to the Fortran language and implemented as a macro preprocessor. The extended language is known as the Force, and this manual describes how to write Force programs and execute them on the Flexible Computer Corporation Flex/32, the Encore Multimax and the Sequent Balance computers. The parallel extension macros are described in detail, but knowledge of Fortran is assumed.

Ion Chromatography as an Alternative to Standard Methods for Analysis of Macro-nutrients in Mehlich 1 Extracts of Unfertilized Forest Soils

Treesearch

Joseph B. Fischer; James H. Miller

2004-01-01

This study evaluates ion chromatography (IC) as an alternative to atomic absorption (AA) and inductively-coupled plasma spectromctry (ICP) for analysis of potassium (K), magnesium (Mg), and calcium (Ca), and and as an alternative to antimonylmolybdate colorimetry and ICP for analysis of phosphorus (P) macro-nutrients in Mehlich 1 extracts. Soils typical of pine forests...

Linking micro- and macro-evolution at the cell type level: a view from the lophotrochozoan Platynereis dumerilii.

PubMed

Simakov, Oleg; Larsson, Tomas A; Arendt, Detlev

2013-09-01

Ever since the origin of the first metazoans over 600 million years ago, cell type diversification has been driven by micro-evolutionary processes at population level, leading to macro-evolution changes above species level. In this review, we introduce the marine annelid Platynereis dumerilii, a member of the lophotrochozoan clade (a key yet most understudied superphylum of bilaterians), as a suitable model system for the simultaneous study, at cellular resolution, of macro-evolutionary processes across phyla and of micro-evolutionary processes across highly polymorphic populations collected worldwide. Recent advances in molecular and experimental techniques, easy maintenance and breeding, and the fast, synchronous and stereotypical development have facilitated the establishment of Platynereis as one of the leading model species in the eco-evo-devo field. Most importantly, Platynereis allows the combination of expression profiling, morphological and physiological characterization at the single cell level. Here, we discuss recent advances in the collection of -omics data for the lab strain and for natural populations collected world-wide that can be integrated with population-specific cellular analyses to result in a cellular atlas integrating genetic, phenotypic and ecological variation. This makes Platynereis a tractable system to begin understanding the interplay between macro- and micro-evolutionary processes and cell type diversity.

Detection of Cracking Levels in Brittle Rocks by Parametric Analysis of the Acoustic Emission Signals

NASA Astrophysics Data System (ADS)

Moradian, Zabihallah; Einstein, Herbert H.; Ballivy, Gerard

2016-03-01

Determination of the cracking levels during the crack propagation is one of the key challenges in the field of fracture mechanics of rocks. Acoustic emission (AE) is a technique that has been used to detect cracks as they occur across the specimen. Parametric analysis of AE signals and correlating these parameters (e.g., hits and energy) to stress-strain plots of rocks let us detect cracking levels properly. The number of AE hits is related to the number of cracks, and the AE energy is related to magnitude of the cracking event. For a full understanding of the fracture process in brittle rocks, prismatic specimens of granite containing pre-existing flaws have been tested in uniaxial compression tests, and their cracking process was monitored with both AE and high-speed video imaging. In this paper, the characteristics of the AE parameters and the evolution of cracking sequences are analyzed for every cracking level. Based on micro- and macro-crack damage, a classification of cracking levels is introduced. This classification contains eight stages (1) crack closure, (2) linear elastic deformation, (3) micro-crack initiation (white patch initiation), (4) micro-crack growth (stable crack growth), (5) micro-crack coalescence (macro-crack initiation), (6) macro-crack growth (unstable crack growth), (7) macro-crack coalescence and (8) failure.

From micro to macro: assessing implementation of integrated care in Australia.

PubMed

Angus, Lisa; Valentijn, Pim P

2018-03-01

Many countries and health systems are pursuing integrated care as a means of achieving better outcomes. However, no standard approaches exist for comparing integration approaches across models or settings, and for evaluating whether the key components of integrated care are present in different initiatives. This study sheds light on how integrated care is being implemented in Australia, using a new tool to characterise and compare integration strategies at micro, meso and macro levels. In total, 114 staff from a purposive sample of 38 integrated care projects completed a survey based on the Rainbow Model of Integrated Care. Ten key informants gave follow-up interviews. Participating projects reported using multiple strategies to implement integrated care, but descriptions of implementation were often inconsistent. Micro-level strategies, including clinical-professional service coordination and person-centred care, were most commonly reported. A common vision was often described as an essential foundation for joint work. However, performance feedback appeared under-utilised, as did strategies requiring macro-level action such as data linkages or payment reform. The results suggest that current integrated care efforts are unevenly weighted towards micro-level strategies. Increased attention to macro-level strategies may be warranted in order to accelerate progress and sustain integrated care in Australia.

Dynamic modeling and adaptive vibration suppression of a high-speed macro-micro manipulator

NASA Astrophysics Data System (ADS)

Yang, Yi-ling; Wei, Yan-ding; Lou, Jun-qiang; Fu, Lei; Fang, Sheng; Chen, Te-huan

2018-05-01

This paper presents a dynamic modeling and microscopic vibration suppression for a flexible macro-micro manipulator dedicated to high-speed operation. The manipulator system mainly consists of a macro motion stage and a flexible micromanipulator bonded with one macro-fiber-composite actuator. Based on Hamilton's principle and the Bouc-Wen hysteresis equation, the nonlinear dynamic model is obtained. Then, a hybrid control scheme is proposed to simultaneously suppress the elastic vibration during and after the motor motion. In particular, the hybrid control strategy is composed of a trajectory planning approach and an adaptive variable structure control. Moreover, two optimization indices regarding the comprehensive torques and synthesized vibrations are designed, and the optimal trajectories are acquired using a genetic algorithm. Furthermore, a nonlinear fuzzy regulator is used to adjust the switching gain in the variable structure control. Thus, a fuzzy variable structure control with nonlinear adaptive control law is achieved. A series of experiments are performed to verify the effectiveness and feasibility of the established system model and hybrid control strategy. The excited vibration during the motor motion and the residual vibration after the motor motion are decreased. Meanwhile, the settling time is shortened. Both the manipulation stability and operation efficiency of the manipulator are improved by the proposed hybrid strategy.

Mathematical modelling of the influenced of diffusion rate on macro nutrient availability in paddy field

NASA Astrophysics Data System (ADS)

Renny; Supriyanto

2018-04-01

Nutrition is the chemical compounds that needed by the organism for the growth process. In plants, nutrients are organic or inorganic compounds that are absorbed from the roots of the soil. It consist of macro and micro nutrient. Macro nutrients are nutrition that needed by plants in large quantities, such as, nitrogen, calcium, pottacium, magnesium, and sulfur. The total soil nutrient is the difference between the input nutrient and the output nutrients. Input nutrients are nutrient that derived from the decomposition of organic substances. Meanwhile, the output nutrient consists of the nutrients that absorbed by plant roots (uptake), the evaporated nutrients (volatilized) and leached nutrients. The nutrient transport can be done through diffusion process. The diffusion process is essential in removing the nutrient from one place to the root surface. It will cause the rate of absorption of nutrient by the roots will be greater. Nutrient concept in paddy filed can be represented into a mathematical modelling, by making compartment models. The rate of concentration change in the compartment model forms a system of homogeneous linear differential equations. In this research, we will use Laplaces transformation to solve the compartment model and determined the dynamics of macro nutrition due to diffusion process.

Innovation evaluation model for macro-construction sector companies: A study in Spain.

PubMed

Zubizarreta, Mikel; Cuadrado, Jesús; Iradi, Jon; García, Harkaitz; Orbe, Aimar

2017-04-01

The innovativeness of the traditional construction sector, composed of construction companies or contractors, is not one of its strong points. Likewise, its poor productivity in comparison with other sectors, such as manufacturing, has historically been criticized. Similar features are found in the Spanish traditional construction sector, which it has been described as not very innovative. However, certain characteristics of the sector may explain this behavior; the companies invest in R+D less than in other sectors and release fewer patents, so traditional innovation evaluation indicators do not reflect the true extent of its innovative activity. While previous research has focused on general innovation evaluation models, limited research has been done regarding innovation evaluation in the macro-construction sector, which includes, apart from the traditional construction companies or contractors, all companies related to the infrastructure life-cycle. Therefore, in this research an innovation evaluation model has been developed for macro-construction sector companies and is applied in the Spanish case. The model may be applied to the macro-construction sector companies in other countries, requiring the adaption of the model to the specific characteristics of the sector in that country, in consultation with a panel of experts at a national level. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nonlinearities in Behavioral Macroeconomics.

PubMed

Gomes, Orlando

2017-07-01

This article undertakes a journey across the literature on behavioral macroeconomics, with attention concentrated on the nonlinearities that the behavioral approach typically suggests or implies. The emphasis is placed on thinking the macro economy as a living organism, composed of many interacting parts, each one having a will of its own, which is in sharp contrast with the mechanism of the orthodox view (well represented by the neoclassical or new Keynesian dynamic stochastic general equilibrium - DSGE - model). The paper advocates that a thorough understanding of individual behavior in collective contexts is the only possible avenue to further explore macroeconomic phenomena and the often observed 'anomalies' that the benchmark DSGE macro framework is unable to explain or justify. After a reflection on the role of behavioral traits as a fundamental component of a new way of thinking the economy, the article proceeds with a debate on some of the most relevant frameworks in the literature that somehow link macro behavior and nonlinearities; covered subjects include macro models with disequilibrium rules, agent-based models that highlight interaction and complexity, evolutionary switching frameworks, and inattention based decision problems. These subjects have, as a fundamental point in common, the use of behavioral elements to transform existing interpretations of the economic reality, making it more evident how irregular fluctuations emerge and unfold on the aggregate.

Triprotic site-specific acid-base equilibria and related properties of fluoroquinolone antibacterials.

PubMed

Rusu, Aura; Tóth, Gergő; Szőcs, Levente; Kökösi, József; Kraszni, Márta; Gyéresi, Árpád; Noszál, Béla

2012-07-01

The complete macro- and microequilibrium analyses of six fluoroquinolone drugs - ciprofloxacin, enrofloxacin, norfloxacin, pefloxacin, ofloxacin and moxifloxacin - are presented. Previous controversial literature data are straightened up, the protonation centers are unambiguously identified, and the protonation macro- and microconstant values are reported. The macroconstants were determined by (1)H NMR-pH titrations while the microconstants were determined by a multi-modal spectroscopic-deductive methodology, in which methyl ester derivatives were synthesized and their NMR-pH titration data contributed to the evaluation of all the microconstants. The full (1)H, (13)C and (15)N NMR assignments, NMR-pH profiles, macro- and microprotonation schemes and species-specific diagrams are included. Our studies show that the fluoroquinolones have three protonation centers: the carboxylate group, the N-1' and N-4' piperazine nitrogens and concentration of the uncharged microspecies is way below the values published earlier. The results could be well interpreted in terms of structural properties. The protonation macro- and microconstant values allow the pre-planned method development in techniques such as capillary zone electrophoresis and also, the interpretation of fluoroquinolone mechanism of biological action, including the pharmacokinetic properties, and antibacterial activities that are all heavily influenced by the states of protonation. Copyright © 2012 Elsevier B.V. All rights reserved.

Porous titania surfaces on titanium with hierarchical macro- and mesoporosities for enhancing cell adhesion, proliferation and mineralization.

PubMed

Han, Guang; Müller, Werner E G; Wang, Xiaohong; Lilja, Louise; Shen, Zhijian

2015-02-01

Titanium received a macroporous titania surface layer by anodization, which contains open pores with average pore diameter around 5 μm. An additional mesoporous titania top layer following the contour of the macropores, of 100-200 nm thickness and with a pore diameter of 10nm, was formed by using the evaporation-induced self-assembly (EISA) method with titanium (IV) tetraethoxide as the precursor. A coherent laminar titania surface layer was thus obtained, creating a hierarchical macro- and mesoporous surface that was characterized by high-resolution electron microscopy. The interfacial bonding between the surface layers and the titanium matrix was characterized by the scratch test that confirmed a stable and strong bonding of titania surface layers on titanium. The wettability to water and the effects on the osteosarcoma cell line (SaOS-2) proliferation and mineralization of the formed titania surface layers were studied systematically by cell culture and scanning electron microscopy. The results proved that the porous titania surface with hierarchical macro- and mesoporosities was hydrophilic that significantly promoted cell attachment and spreading. A synergistic role of the hierarchical macro- and mesoporosities was revealed in terms of enhancing cell adhesion, proliferation and mineralization, compared with the titania surface with solo scale topography. Copyright © 2014 Elsevier B.V. All rights reserved.

Regulation of coal polymer degradation by fungi. Fourth quarterly progress report, May 1995--June 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irvine, R.L.

1995-07-24

To test the hypothesis that coal (leonardite) Solubilization and the subsequent depolymerization of the solubilized coal macromolecules are distinct events in lignin degrading fungi. In addition to T versicolor, Phanerochaete chrysosporium, another lignin degrading fungus that also has the ability to solubilize coal, will be studied. To test the hypothesis that the processes of coal (leonardite) solubilization and coal macro molecule depolymerization in lignin degrading fungi can be regulated by altering the nutritional status of the microorganism. Coal solubilization is expected to occur in nutrient rich media whereas depolymerization of solubilized coal macromolecules is expected to occur in nutrient limitedmore » media. To determine the role of extracellular enzymes (laccases, lignin peroxidases and Mn peroxidases) that are secreted by lignin degrading fungi during coal solubilization or coal macro molecule depolymerization. To assess the role of enzymatically generated oxygen radicals, non-radical active oxygen species, veratryl alcohol radicals and Mn{sup +++} complexes in coal macro molecule depolymerization. To characterize products of coal solubilization and coal macro molecule depolymerization that are formed by T. versicolor and P. chrysosporium and their respective extracellular enzymes. Solubilization products formed using oxalic acid and other metal chelators will also be characterized and compared.« less

Laboratory measurements of electrical resistivity versus water content on small soil cores

NASA Astrophysics Data System (ADS)

Robain, H.; Camerlynck, C.; Bellier, G.; Tabbagh, A.

2003-04-01

The assessment of soil water content variations more and more leans on geophysical methods that are non invasive and that allow a high spatial sampling. Among the different methods, DC electrical imaging is moving forward. DC Electrical resistivity shows indeed strong seasonal variations that principally depend on soil water content variations. Nevertheless, the widely used Archie's empirical law [1], that links resistivity with voids saturation and water conductivity is not well suited to soil materials with high clay content. Furthermore, the shrinking and swelling properties of soil materials have to be considered. Hence, it is relevant to develop new laboratory experiments in order to establish a relation between electrical resistivity and water content taking into account the rheological and granulometrical specificities of soil materials. The experimental device developed in IRD laboratory allows to monitor simultaneously (i) the water content, (ii) the electrical resistivity and (iii) the volume of a small cylindrical soil core (100cm3) put in a temperature controlled incubator (30°C). It provides both the shrinkage curve of the soil core (voids volume versus water content) and the electrical resistivity versus water content curve The modelisation of the shrinkage curve gives for each moisture state the water respectively contained in macro and micro voids [2], and then allows to propose a generalized Archie's like law as following : 1/Rs = 1/Fma.Rma + 1/Fmi.Rmi and Fi = Ai/(Vi^Mi.Si^Ni) with Rs : the soil resistivity. Fma and Fmi : the so called "formation factor" for macro and micro voids, respectively. Rma and Rmi : the resistivity of the water contained in macro and micro voids, respectively. Vi : the volume of macro and micro voids, respectively. Si : the saturation of macro and micro voids, respectively. Ai, Mi and Ni : adjustment coefficients. The variations of Rmi are calculated, assuming that Rma is a constant. Indeed, the rise of ionic concentration in water may be neglected during the sewage of macro voids as it corresponds to a small quantity of water for the studied samples. Soil solid components are generally electrical insulators, the conduction of electrical current only lies on two phenomenon occurring in water : (i) volume conduction controlled by the electrolyte concentration in water and the geometrical characteristics of macro voids network ; (ii) surface conduction controlled by the double diffuse layer that depends on the solid-liquid interactions, the specific surface of clay minerals and the geometry of particles contacts. For the water contained in macro voids the preeminent phenomenon seems to be volume conduction while for the water contained in micro voids, it seems to be surface conduction. This hypothesis satisfyingly explains the shape of the electrical resistivity versus water content curves obtained for three different oxisols with clayey, clayey-sandy and sandy-clayey texture. [1] Archie G.E. 1942. The electrical resistivity log as an aid in determining some reservoirs characteristics. Trans. AIME, 146, 54-67. [2] Braudeau E. et al. 1999. New device and method for soil shrinkage curve measurement and characterization. S.S.S.A.J., 63(3), 525-535.

Funding the Military Retirement System: A Private Sector Investment Approach to Accrual Accounting

DTIC Science & Technology

1987-12-01

management firm . Assumptions. In performing this research to determine whether the MRS can be funded through private sector investments, several...to determine any savings that such a strategy might offer to DOD and, ultimately, the American taxpayers. From a "macro" level, this study revealed...government. To accomplish this "macro-level" research, it is necessary to determine representative private investment plans. The real interest returns of the

From nano- to macro-engineering of oxide-encapsulated-nanoparticles for harsh reactions: one-step organization via cross-linking molecules.

PubMed

Zhang, Qiaofei; Zhao, Guofeng; Zhang, Zhiqiang; Han, Lupeng; Fan, Songyu; Chai, Ruijuan; Li, Yakun; Liu, Ye; Huang, Jun; Lu, Yong

2016-09-29

A strategy of "macro-micro-nano" organization is reported for embedding oxide-encapsulated-nanoparticles onto monolithic substrates in one-step with the aid of molecularly defined cross-linking agents. Such catalysts, with enhanced heat/mass transfer and high permeability, are qualified for several harsh reaction processes such as CH 4 /VOC abatement, gas-phase hydrogenation of dimethyl oxalate and oxidative dehydrogenation of ethane.

Validation of the United States Marine Corps Qualified Candidate Population Model

DTIC Science & Technology

2003-03-01

time. Fields are created in the database to support this forecasting. User forms and a macro are programmed in Microsoft VBA to develop the...at 0.001. To accomplish 50,000 iterations of a minimization problem, this study wrote a macro in the VBA programming language that guides the solver...success in the commissioning process. **To improve the diagnostics of this propensity model, other factors were considered as well. Applying SQL

An SAS Macro for Implementing the Modified Bollen-Stine Bootstrap for Missing Data: Implementing the Bootstrap Using Existing Structural Equation Modeling Software

ERIC Educational Resources Information Center

Enders, Craig K.

2005-01-01

The Bollen-Stine bootstrap can be used to correct for standard error and fit statistic bias that occurs in structural equation modeling (SEM) applications due to nonnormal data. The purpose of this article is to demonstrate the use of a custom SAS macro program that can be used to implement the Bollen-Stine bootstrap with existing SEM software.…

Macro-cellular silica foams: synthesis during the natural creaming process of an oil-in-water emulsion.

PubMed

Sen, T; Tiddy, G J T; Casci, J L; Anderson, M W

2003-09-07

The room-temperature synthesis of a macro-mesoporous silica material during the natural creaming process of an oil-in-water emulsion is reported. The material has 3-dimensional interconnected macropores with a strut-like structure similar to meso-cellular silica foams with mesoporous walls of worm-hole structure. The material has very high surface area (approximately 800 m2 g(-1)) with narrow mesopore size distribution.

Combined micro and macro geodynamic modelling of mantle flow: methods, potentialities and limits.

NASA Astrophysics Data System (ADS)

Faccenda, M.

2015-12-01

Over the last few years, geodynamic simulations aiming at reconstructing the Earth's internal dynamics have increasingly attempted to link processes occurring at the micro (i.e., strain-induced lattice preferred orientation (LPO) of crystal aggregates) and macro scale (2D/3D mantle convection). As a major outcome, such a combined approach results in the prediction of the modelled region's elastic properties that, in turn, can be used to perform seismological synthetic experiments. By comparison with observables, the geodynamic simulations can then be considered as a good numerical analogue of specific tectonic settings, constraining their deep structure and recent tectonic evolution. In this contribution, I will discuss the recent methodologies, potentialities and current limits of combined micro- and macro-flow simulations, with particular attention to convergent margins whose dynamics and deep structure is still the object of extensive studies.

From micro-correlations to macro-correlations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eliazar, Iddo, E-mail: iddo.eliazar@intel.com

2016-11-15

Random vectors with a symmetric correlation structure share a common value of pair-wise correlation between their different components. The symmetric correlation structure appears in a multitude of settings, e.g. mixture models. In a mixture model the components of the random vector are drawn independently from a general probability distribution that is determined by an underlying parameter, and the parameter itself is randomized. In this paper we study the overall correlation of high-dimensional random vectors with a symmetric correlation structure. Considering such a random vector, and terming its pair-wise correlation “micro-correlation”, we use an asymptotic analysis to derive the random vector’smore » “macro-correlation” : a score that takes values in the unit interval, and that quantifies the random vector’s overall correlation. The method of obtaining macro-correlations from micro-correlations is then applied to a diverse collection of frameworks that demonstrate the method’s wide applicability.« less

Characterization of synthetic macroporous ion-exchange resins in low-pressure cartridges and columns. Evaluation of the performance of Macro-Prep 50 S resin in the purification of anti-Klenow antibodies from goat serum.

PubMed

Dunn, L; Abouelezz, M; Cummings, L; Navvab, M; Ordunez, C; Siebert, C J; Talmadge, K W

1991-07-12

Three ion-exchange materials and one hydrophobic-interaction chromatography packing, based on a rigid macroporous polymer with large, relatively uniform pores, have been evaluated for low-pressure liquid chromatography of antibodies. These sorbents have high capacities for both small and large proteins and are mechanically, chemically, and thermally stable. Macro-Prep 50 S. CM and Q ion-exchange materials are strongly acidic, weakly acidic, and strongly basic, respectively. Protein binding and recovery, pressure-flow properties, and chemical and thermal stability were determined for each sorbent. A rapid, two-step method for the purification of anti-Klenow antibodies from goat serum was developed, based on the Macro-Prep 50 S strong-acid cation-exchange material and the Econo-Pac HIC prepacked hydrophobic-interaction cartridge.

Irreversible thermodynamic analysis and application for molecular heat engines

NASA Astrophysics Data System (ADS)

Lucia, Umberto; Açıkkalp, Emin

2017-09-01

Is there a link between the macroscopic approach to irreversibility and microscopic behaviour of the systems? Consumption of free energy keeps the system away from a stable equilibrium. Entropy generation results from the redistribution of energy, momentum, mass and charge. This concept represents the essence of the thermodynamic approach to irreversibility. Irreversibility is the result of the interaction between systems and their environment. The aim of this paper is to determine lost works in a molecular engine and compare results with macro (classical) heat engines. Firstly, irreversible thermodynamics are reviewed for macro and molecular cycles. Secondly, irreversible thermodynamics approaches are applied for a quantum heat engine with -1/2 spin system. Finally, lost works are determined for considered system and results show that macro and molecular heat engines obey same limitations. Moreover, a quantum thermodynamic approach is suggested in order to explain the results previously obtained from an atomic viewpoint.

Impact of refined petroleum spills on water quality, macro-invertebrate and microbial communities of a tropical aquatic environment.

PubMed

Chukwu, L O; Nwachukwu, S C U

2005-07-01

Water quality characteristics, benthic macro-invertebrates and microbial communities of three first order streams in South West Nigeria were investigated to assess the effects of refined petroleum five months after spillage. All physical and chemical conditions except temperature and pH were significantly different (P<0.01) at the upstream control stations and impacted stations reflecting the perturbational stress. The benthic macro-invertebrate fauna were dominated by arthropods, but the faunal spectrum was dissimilar at all the stations studied. Sampling stations at the epicentre of the spill showed considerable reduction in faunal compositions and relative abundance. Generally, the microbial density and diversity were highest in both soil and water samples from impacted sites than in control sites. There was a significantly higher proportion (P < 0.05) of hydrocarbon utilizers in soil than in water samples in all stations except in samples from stations (P<0.05).

Immediate, non-submerged, root-analogue zirconia implant in single tooth replacement.

PubMed

Pirker, W; Kocher, A

2008-03-01

This report demonstrates the successful clinical use of a modified root-analogue zirconia implant for immediate single tooth replacement. A right maxillary premolar was removed and a custom-made, root-analogue, roughened zirconia implant with macro-retentions in the interdental space was fabricated and placed into the extraction socket 4 days later. Four months after root implantation a composite crown was cemented. No complications occurred during the healing period. An excellent esthetic and functional result was achieved with the composite crown. No clinically noticeable bone resorption or soft-tissue recession was observed at 26 months follow up. Significant modifications such as macro-retentions seem to indicate that primary stability and excellent osseointegration of immediate root-analogue zirconia implants can be achieved, while preventing unesthetic bone resorption. The macro-retentions must be limited to the interdental space to avoid fracture of the thin buccal cortex. This successful case warrants further clinical research in well controlled trials.

A macro-economic framework for evaluation of cyber security risks related to protection of intellectual property.

PubMed

Andrijcic, Eva; Horowitz, Barry

2006-08-01

The article is based on the premise that, from a macro-economic viewpoint, cyber attacks with long-lasting effects are the most economically significant, and as a result require more attention than attacks with short-lasting effects that have historically been more represented in literature. In particular, the article deals with evaluation of cyber security risks related to one type of attack with long-lasting effects, namely, theft of intellectual property (IP) by foreign perpetrators. An International Consequence Analysis Framework is presented to determine (1) the potential macro-economic consequences of cyber attacks that result in stolen IP from companies in the United States, and (2) the likely sources of such attacks. The framework presented focuses on IP theft that enables foreign companies to make economic gains that would have otherwise benefited the U.S. economy. Initial results are presented.

Mediation analysis allowing for exposure-mediator interactions and causal interpretation: theoretical assumptions and implementation with SAS and SPSS macros

PubMed Central

Valeri, Linda; VanderWeele, Tyler J.

2012-01-01

Mediation analysis is a useful and widely employed approach to studies in the field of psychology and in the social and biomedical sciences. The contributions of this paper are several-fold. First we seek to bring the developments in mediation analysis for non linear models within the counterfactual framework to the psychology audience in an accessible format and compare the sorts of inferences about mediation that are possible in the presence of exposure-mediator interaction when using a counterfactual versus the standard statistical approach. Second, the work by VanderWeele and Vansteelandt (2009, 2010) is extended here to allow for dichotomous mediators and count outcomes. Third, we provide SAS and SPSS macros to implement all of these mediation analysis techniques automatically and we compare the types of inferences about mediation that are allowed by a variety of software macros. PMID:23379553

Mediation analysis allowing for exposure-mediator interactions and causal interpretation: theoretical assumptions and implementation with SAS and SPSS macros.

PubMed

Valeri, Linda; Vanderweele, Tyler J

2013-06-01

Mediation analysis is a useful and widely employed approach to studies in the field of psychology and in the social and biomedical sciences. The contributions of this article are several-fold. First we seek to bring the developments in mediation analysis for nonlinear models within the counterfactual framework to the psychology audience in an accessible format and compare the sorts of inferences about mediation that are possible in the presence of exposure-mediator interaction when using a counterfactual versus the standard statistical approach. Second, the work by VanderWeele and Vansteelandt (2009, 2010) is extended here to allow for dichotomous mediators and count outcomes. Third, we provide SAS and SPSS macros to implement all of these mediation analysis techniques automatically, and we compare the types of inferences about mediation that are allowed by a variety of software macros. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

Processing and Mechanical Properties of Macro Polyamide Fiber Reinforced Concrete

PubMed Central

Jeon, Joong Kyu; Kim, WooSeok; Jeon, Chan Ki; Kim, Jin Cheol

2014-01-01

This study developed a macro-sized polyamide (PA) fiber for concrete reinforcement and investigated the influence of the PA fiber on flexural responses in accordance with ASTM standards. PA fibers are advantageous compared to steel fibers that are corrosive and gravitated. The macro-sized PA fiber significantly improved concrete ductility and toughness. Unlike steel fibers, the PA fibers produced two peak bending strengths. The first-peaks occurred near 0.005 mm of deflection and decreased up to 0.5 mm of deflection. Then the bending strength increased up to second-peaks until the deflections reached between 1.0 and 1.5 mm. The averaged flexural responses revealed that PA fiber content did not significantly influence flexural responses before L/600, but had significant influence thereafter. Toughness performance levels were also determined, and the results indicated more than Level II at L/600 and Level IV at others. PMID:28788265

Processing and Mechanical Properties of Macro Polyamide Fiber Reinforced Concrete.

PubMed

Jeon, Joong Kyu; Kim, WooSeok; Jeon, Chan Ki; Kim, Jin Cheol

2014-11-26

This study developed a macro-sized polyamide (PA) fiber for concrete reinforcement and investigated the influence of the PA fiber on flexural responses in accordance with ASTM standards. PA fibers are advantageous compared to steel fibers that are corrosive and gravitated. The macro-sized PA fiber significantly improved concrete ductility and toughness. Unlike steel fibers, the PA fibers produced two peak bending strengths. The first-peaks occurred near 0.005 mm of deflection and decreased up to 0.5 mm of deflection. Then the bending strength increased up to second-peaks until the deflections reached between 1.0 and 1.5 mm. The averaged flexural responses revealed that PA fiber content did not significantly influence flexural responses before L /600, but had significant influence thereafter. Toughness performance levels were also determined, and the results indicated more than Level II at L /600 and Level IV at others.

Physical Properties of Polyester Fabrics Treated with Nano, Micro and Macro Emulsion Silicones

NASA Astrophysics Data System (ADS)

Parvinzadeh, M.; Hajiraissi, R.

2007-08-01

The processing of textile to achieve a particular handle is one of the most important aspects of finishing technology. Fabrics softeners are liquid composition added to washing machines during the rinse cycle to make clothes feel better to the touch. The first fabric softeners were developed by the textile industry during the early twentieth century. In this research polyester fabrics were treated with nano, micro and macro emulsion silicone softeners. Some of the physical properties of the treated fabric samples are discussed. The drapeability of treated samples was improved after treatment with nano silicone softeners. The colorimetric measurement of softener-treated fabrics is evaluated with a reflectance spectrophotometer. Moisture regain of treated samples is increased due to coating of silicone softeners. There is some increase in the weight of softener-treated samples. Samples treated with nano emulsion silicones gave better results compared to micro- and macro-emulsion treated ones.

An Integrated Planning Representation Using Macros, Abstractions, and Cases

NASA Technical Reports Server (NTRS)

Baltes, Jacky; MacDonald, Bruce

1992-01-01

Planning will be an essential part of future autonomous robots and integrated intelligent systems. This paper focuses on learning problem solving knowledge in planning systems. The system is based on a common representation for macros, abstractions, and cases. Therefore, it is able to exploit both classical and case based techniques. The general operators in a successful plan derivation would be assessed for their potential usefulness, and some stored. The feasibility of this approach was studied through the implementation of a learning system for abstraction. New macros are motivated by trying to improve the operatorset. One heuristic used to improve the operator set is generating operators with more general preconditions than existing ones. This heuristic leads naturally to abstraction hierarchies. This investigation showed promising results on the towers of Hanoi problem. The paper concludes by describing methods for learning other problem solving knowledge. This knowledge can be represented by allowing operators at different levels of abstraction in a refinement.

Influence of dry cohesion on the micro- and macro-mechanical properties of dense polydisperse powders & grains

NASA Astrophysics Data System (ADS)

Kievitsbosch, Robert; Smit, Hendrik; Magnanimo, Vanessa; Luding, Stefan; Taghizadeh, Kianoosh

2017-06-01

Understanding how cohesive granular materials behave is of interest for many industrial applications, such as pharmaceutical or food and civil engineering. Models of the behaviour of granular materials on the microscopic scale can be used to obtain macroscopic continuum relations by a micro-macro transition approach. The Discrete Element Method (DEM) is used to inspect the influence of cohesion on the micro and macro behaviour of granular assemblies by using an elasto-plastic cohesive contact model. Interestingly, we observe that frictional samples prepared with different cohesion values show a significant difference in pressure and coordination number in the jammed regime; the differences become more pronounced when packings are closer to the jamming density, i.e. the lowest density where the system is mechanically stable. Furthermore, we observe that cohesion has an influence on the jamming density for frictional samples, but there is no influence on the jamming density for frictionless samples.

Mother–Child Communication and Maternal Depressive Symptoms in Families of Children With Cancer: Integrating Macro and Micro Levels of Analysis

PubMed Central

Dunn, Madeleine J.; Zuckerman, Teddi; Hughart, Leighann; Vannatta, Kathryn; Gerhardt, Cynthia A.; Saylor, Megan; Schuele, C. Melanie; Compas, Bruce E.

2013-01-01

Objectives This study examines associations between maternal depressive symptoms and macro- and micro-level aspects of mothers’ communication about their children’s cancer. Methods Mothers reported depressive symptoms after diagnosis or relapse (child mean age = 10.4 years; 53% male). Mother–child dyads (N = 94) were subsequently observed discussing the child’s cancer and maternal communication was coded. Results Macro-level indicators (positive and negative communication) were associated with certain micro-level indicators of communication (topic maintenance, reflections, reframes, and imperatives). Higher depressive symptoms predicted lower positive communication and higher negative communication. Maternal reflections and imperatives predicted positive communication, and topic maintenance and reframes predicted negative communication, beyond child age, family income, and depressive symptoms. Conclusions Findings suggest concrete targets for improving communication in families after diagnosis or relapse. PMID:23616622

Micro-flock patterns and macro-clusters in chiral active Brownian disks

NASA Astrophysics Data System (ADS)

Levis, Demian; Liebchen, Benno

2018-02-01

Chiral active particles (or self-propelled circle swimmers) feature a rich collective behavior, comprising rotating macro-clusters and micro-flock patterns which consist of phase-synchronized rotating clusters with a characteristic self-limited size. These patterns emerge from the competition of alignment interactions and rotations suggesting that they might occur generically in many chiral active matter systems. However, although excluded volume interactions occur naturally among typical circle swimmers, it is not yet clear if macro-clusters and micro-flock patterns survive their presence. The present work shows that both types of pattern do survive but feature strongly enhance fluctuations regarding the size and shape of the individual clusters. Despite these fluctuations, we find that the average micro-flock size still follows the same characteristic scaling law as in the absence of excluded volume interactions, i.e. micro-flock sizes scale linearly with the single-swimmer radius.

Macro-conditions and immigrants' happiness: Is moving to a wealthy country all that matters?

PubMed

Hendriks, Martijn; Bartram, David

2016-03-01

Migrants look for a better life. In what kind of country will they live happiest? Many migrants aspire to move to wealthy countries, but non-economic factors might be important as well in making a country livable for migrants. This issue is addressed here by examining the impact of macroeconomic conditions and non-economic macro-conditions (good governance and a pleasant social climate) on immigrants' happiness in twenty European nations. We find that immigrants' happiness depends both on economic and non-economic macro-conditions. The social climate is especially important, particularly in terms of a positive attitude in society towards migrants. Our findings imply that the choice of destination country matters for migrants' happiness and that the discrepancy between migration motives and migration outcomes may constrain immigrants from maximizing subjective gains via migration. Copyright © 2015 Elsevier Inc. All rights reserved.

Structural-functional integrated concrete with macro-encapsulated inorganic PCM

NASA Astrophysics Data System (ADS)

Mohseni, Ehsan; Tang, Waiching; Wang, Zhiyu

2017-09-01

Over the last few years the application of thermal energy storage system incorporating phase change materials (PCMs) to foster productivity and efficiency of buildings energy has grown rapidly. In this study, a structural-functional integrated concrete was developed using macro-encapsulated PCM-lightweight aggregate (LWA) as partial replacement (25 and 50% by volume) of coarse aggregate in control concrete. The PCM-LWA was prepared by incorporation of an inorganic PCM into porous LWAs through vacuum impregnation. The mechanical and thermal performance of PCM-LWA concrete were studied. The test results revealed that though the compressive strength of concrete with PCM-LWA was lower than the control concrete, but ranged from 22.02 MPa to 42.88 MPa which above the minimum strength requirement for structural application. The thermal performance test indicated that macro-encapsulated PCM-LWA has underwent the phase change transition reducing the indoor temperature.

A Comparison of Three-Dimensional Simulations of Traveling-Wave Tube Cold-Test Characteristics Using CST MICROWAVE STUDIO and MAFIA

NASA Technical Reports Server (NTRS)

Chevalier, C. T.; Herrmann, K. A.; Kory, C. L.; Wilson, J. D.; Cross, A. W.; Williams, W. D. (Technical Monitor)

2001-01-01

Previously, it was shown that MAFIA (solutions of Maxwell's equations by the Finite Integration Algorithm), a three-dimensional simulation code, can be used to produce accurate cold-test characteristics including frequency-phase dispersion, interaction impedance, and attenuation for traveling-wave tube (TWT) slow-wave structures. In an effort to improve user-friendliness and simulation time, a model was developed to compute the cold-test parameters using the electromagnetic field simulation software package CST MICROWAVE STUDIO (MWS). Cold-test parameters were calculated for several slow-wave circuits including a ferruled coupled-cavity, a folded waveguide, and a novel finned-ladder circuit using both MWS and MAFIA. Comparisons indicate that MWS provides more accurate cold-test data with significantly reduced simulation times. Both MAFIA and MWS are based on the finite integration (FI) method; however, MWS has several advantages over MAFIA. First, it has a Windows based interface for PC operation, making it very user-friendly, whereas MAFIA is UNIX based. MWS uses a new Perfect Boundary Approximation (PBA), which increases the accuracy of the simulations by avoiding stair step approximations associated with MAFIA's representation of structures. Finally, MWS includes a Visual Basic for Applications (VBA) compatible macro language that enables the simulation process to be automated and allows for the optimization of user-defined goal functions, such as interaction impedance.

Nanoscale Formulations and Diagnostics With Their Recent Trends: A Major Focus of Future Nanotechnology.

PubMed

Mukherjee, Biswajit; Dutta, Lopamudra; Mondal, Laboni; Dey, Niladri Shekhar; Chakraborty, Samrat; Maji, Ruma; Shaw, Tapan Kumar

2015-01-01

Nanomedicine is an emerging and rapidly growing field, possibly exploring for high expectation to healthcare. Nanoformulations have been designed to overcome challenges due to the development and fabrication of nanostructures. Unique size-dependent properties of nanoformulations make them superior and indispensable in many areas of human activity. Nano drug delivery systems are formulated and engineered to carry and deliver a number of substances in a targeted and controlled way. The vision of nanocarriers can be designed that will serve a dual purpose, allowing both treatment and diagnosis to be contained in an 'all-in-one' package. Nanoscale drugdelivery systems efficiently regulate the release, pharmacokinetics, pharmacodynamics, solubility, immunocompatibility, cellular uptake and biodistribution of chemical entities (drug). Their cellular uptake takes place by various mechanisms such as micropinocytosis, phagocytosis and receptor mediated endocytosis. These phenomena cause longer retention in blood circulation resulting in the release of the encapsulated materials in a sustained manner thus minimize the plasma fluctuations and toxic side effects. In this manner, the therapeutic index of conventional pharmaceuticals is efficiently increased. They can be used to deliver both micro and macro biomolecules such as peptides, proteins, plasmid DNA and synthetic oligodeoxynucleotides. In this present review, several recent developing and modifying nano-products for the detection, analysis, and treatment of diseases with their US and world patents along with various diagnostic kits have been discussed.

Disposal Of Irradiated Cadmium Control Rods From The Plumbrook Reactor Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Posivak, E.J.; Berger, S.R.; Freitag, A.A.

2008-07-01

Innovative mixed waste disposition from NASA's Plum Brook Reactor Facility was accomplished without costly repackaging. Irradiated characteristic hardware with contact dose rates as high as 8 Sv/hr was packaged in a HDPE overpack and stored in a Secure Environmental Container during earlier decommissioning efforts, awaiting identification of a suitable pathway. WMG obtained regulatory concurrence that the existing overpack would serve as the macro-encapsulant per 40CFR268.45 Table 1.C. The overpack vent was disabled and the overpack was placed in a stainless steel liner to satisfy overburden slumping requirements. The liner was sealed and placed in shielded shoring for transport to themore » disposal site in a US DOT Type A cask. Disposition via this innovative method avoided cost, risk, and dose associated with repackaging the high dose irradiated characteristic hardware. In conclusion: WMG accomplished what others said could not be done. Large D and D contractors advised NASA that the cadmium control rods could only be shipped to the proposed Yucca mountain repository. NASA management challenged MOTA to find a more realistic alternative. NASA and MOTA turned to WMG to develop a methodology to disposition the 'hot and nasty' waste that presumably had no path forward. Although WMG lead a team that accomplished the 'impossible', the project could not have been completed with out the patient, supportive management by DOE-EM, NASA, and MOTA. (authors)« less

Antibacterial activity of combination of synthetic and biopolymer non-woven structures.

PubMed

Bhullar, Sukhwinder K; Özsel, Burcak Kaya; Yadav, Ramesh; Kaur, Ginpreet; Chintamaneni, Meena; Buttar, Harpal S

2015-12-01

Fibrous structures and synthetic polymer blends offer potential usages in making biomedical devices, textiles used in medical practices, food packaging, tissue engineering, environmental applications and biomedical arena. These products are also excellent candidates for building scaffolds to grow stem cells for implantation, to make tissue engineering grafts, to make stents to open up blood vessels caused by atherosclerosis or narrowed by blood clots, for drug delivery systems for micro- to nano-medicines, for transdermal patches, and for healing of wounds and burn care. The current study was designed to evaluate the antimicrobial activity of woven and non-woven forms of nano- and macro-scale blended polymers having biocompatible and biodegradable characteristics. The antimicrobial activity of non-woven fibrous structures created with the combination of synthetic and biopolymer was assessed using Gram-negative, Gram-positive bacteria, such as Staphylococcus aureus, Proteus vulgaris, Escherichia coli and Enterobacter aerogenes using pour plate method. Structural evaluation of the fabricated samples was performed by Fourier transform infrared spectroscopy. Broad spectrum antibacterial activities were found from the tested materials consisting of polyvinyl alcohol (PVA) with chitosan and nylon-6 combined with chitosan and formic acid. The combination of PVA with chitosan was more bactericidal or bacteriostatic than that of nylon-6 combined with chitosan and formic acid. PVA combination with chitosan appears to be a broad-spectrum antimicrobial agent.

Application of a newly developed software program for image quality assessment in cone-beam computed tomography.

PubMed

de Oliveira, Marcus Vinicius Linhares; Santos, António Carvalho; Paulo, Graciano; Campos, Paulo Sergio Flores; Santos, Joana

2017-06-01

The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT.

New Insights Into an Old Arrhythmia: High-Resolution Mapping Demonstrates Conduction and Substrate Variability in Right Atrial Macro-Re-Entrant Tachycardia.

PubMed

Pathik, Bhupesh; Lee, Geoffrey; Sacher, Frédéric; Jaïs, Pierre; Massoullié, Grégoire; Derval, Nicolas; Bates, Matthew G; Lipton, Jonathan; Joseph, Stephen; Morton, Joseph; Sparks, Paul; Kistler, Peter; Kalman, Jonathan M

2017-09-01

Using high-resolution 3-dimensional (3D) mapping, the aim of this study was to further characterize right atrial macro-re-entrant tachycardias and answer unresolved questions in the understanding of this arrhythmia. Despite advances in understanding of the mechanisms of right atrial macro-re-entrant tachycardias, many questions lack definitive answers. The advent of high-resolution 3D mapping provides an opportunity to gain further insights into the nature of these common circuits. A total of 25 patients with right atrial macro-re-entrant tachycardia were studied. High-resolution 3D mapping (Rhythmia mapping system, Boston Scientific, Natick, Massachusetts) was performed. Regional voltage and conduction velocity were determined. Maps were analyzed to characterize wave front propagation patterns in all atrial regions. The relationship between substrate and conduction was evaluated. A total of 42 right atrial macro-re-entrant circuits were observed. The most common location of the posterior line of block was the posteromedial right atrium (73%). This line of block continued superiorly into the superior vena cava, taking an oblique course to finish on the anterior superior vena cava aspect in 73%. Conduction delay at the crista terminalis was less common (23%). Conduction slowing or block was seen at the limbus of the fossa ovalis (73%) and Eustachian ridge (77%). Highly variable and localized areas of slow conduction were also observed in the inferior septum (45%), superior septum (27%), anterosuperior right atrium (23%), and lateral right atrium (23%). Localized conduction slowing was seen in the cavotricuspid isthmus in 50% of patients, but there was no generalized conduction slowing in this isthmus. The voltage in regions of slow conduction was significantly lower compared with areas of normal conduction velocity (p < 0.001). Conduction channels were observed in 55% of patients. High-resolution 3D mapping has provided new insights into the nature of right atrial macro-re-entrant tachycardias. Variable regions of abnormal atrial substrate were associated with conduction slowing and block. Individual variation in propagation patterns was observed in association with this variable substrate. (Mapping of Atrial Arrhythmias Using High Spatial Resolution Mapping Catheters and the Rhythmia Mapping System; ACTRN12615000544572). Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Atmospheric neutrino oscillations from upward throughgoing muon multiple scattering in MACRO

NASA Astrophysics Data System (ADS)

MACRO Collaboration; Ambrosio, M.; Antolini, R.; Bakari, D.; Baldini, A.; Barbarino, G. C.; Barish, B. C.; Battistoni, G.; Becherini, Y.; Bellotti, R.; Bemporad, C.; Bernardini, P.; Bilokon, H.; Bloise, C.; Bower, C.; Brigida, M.; Bussino, S.; Cafagna, F.; Calicchio, M.; Campana, D.; Carboni, M.; Caruso, R.; Cecchini, S.; Cei, F.; Chiarella, V.; Chiarusi, T.; Choudhary, B. C.; Coutu, S.; Cozzi, M.; de Cataldo, G.; Dekhissi, H.; de Marzo, C.; de Mitri, I.; Derkaoui, J.; de Vincenzi, M.; di Credico, A.; Favuzzi, C.; Forti, C.; Fusco, P.; Giacomelli, G.; Giannini, G.; Giglietto, N.; Giorgini, M.; Grassi, M.; Grillo, A.; Gustavino, C.; Habig, A.; Hanson, K.; Heinz, R.; Iarocci, E.; Katsavounidis, E.; Katsavounidis, I.; Kearns, E.; Kim, H.; Kumar, A.; Kyriazopoulou, S.; Lamanna, E.; Lane, C.; Levin, D. S.; Lipari, P.; Longo, M. J.; Loparco, F.; Maaroufi, F.; Mancarella, G.; Mandrioli, G.; Manzoor, S.; Margiotta, A.; Marini, A.; Martello, D.; Marzari-Chiesa, A.; Mazziotta, M. N.; Michael, D. G.; Mikheyev, S.; Monacelli, P.; Montaruli, T.; Monteno, M.; Mufson, S.; Musser, J.; Nicolò, D.; Nolty, R.; Orth, C.; Osteria, G.; Palamara, O.; Patera, V.; Patrizii, L.; Pazzi, R.; Peck, C. W.; Perrone, L.; Petrera, S.; Popa, V.; Rainò, A.; Reynoldson, J.; Ronga, F.; Rrhioua, A.; Satriano, C.; Scapparone, E.; Scholberg, K.; Sciubba, A.; Serra, P.; Sioli, M.; Sirri, G.; Sitta, M.; Spinelli, P.; Spinetti, M.; Spurio, M.; Steinberg, R.; Stone, J. L.; Sulak, L. R.; Surdo, A.; Tarlè, G.; Togo, V.; Vakili, M.; Walter, C. W.; Webb, R.

2003-07-01

The energy of atmospheric neutrinos detected by MACRO was estimated using multiple Coulomb scattering of upward throughgoing muons. This analysis allows a test of atmospheric neutrino oscillations, relying on the distortion of the muon energy distribution. These results have been combined with those coming from the upward throughgoing muon angular distribution only. Both analyses are independent of the neutrino flux normalization and provide strong evidence, above the /4σ level, in favour of neutrino oscillations.

An Implementation Methodology and Software Tool for an Entropy Based Engineering Model for Evolving Systems

DTIC Science & Technology

2003-06-01

delivery Data Access (1980s) "What were unit sales in New England last March?" Relational databases (RDBMS), Structured Query Language ( SQL ...macros written in Visual Basic for Applications ( VBA ). 32 Iteration Two: Class Diagram Tech OASIS Export ScriptImport Filter Data ProcessingMethod 1...MS Excel * 1 VBA Macro*1 contains sends data to co nt ai ns executes * * 1 1 contains contains Figure 20. Iteration two class diagram The

Quantitative fractography by digital image processing: NIH Image macro tools for stereo pair analysis and 3-D reconstruction.

PubMed

Hein, L R

2001-10-01

A set of NIH Image macro programs was developed to make qualitative and quantitative analyses from digital stereo pictures produced by scanning electron microscopes. These tools were designed for image alignment, anaglyph representation, animation, reconstruction of true elevation surfaces, reconstruction of elevation profiles, true-scale elevation mapping and, for the quantitative approach, surface area and roughness calculations. Limitations on time processing, scanning techniques and programming concepts are also discussed.

Priority setting in health care: on the relation between reasonable choices on the micro-level and the macro-level.

PubMed

Baerøe, Kristine

2008-01-01

There has been much discussion about how to obtain legitimacy at macro-level priority setting in health care by use of fair procedures, but how should we consider priority setting by individual clinicians or health workers at the micro-level? Despite the fact that just health care totally hinges upon their decisions, surprisingly little attention seems being paid to the legitimacy of these decisions. This paper addresses the following question: what are the conditions that have to be met in order to ensure that individual claims on health care are well aligned with an overall concept of just health care? Drawing upon a distinction between individual and aggregated needs, I argue that even though we assume the legitimacy of macro-level guidelines, this legitimacy is not directly transferable to decisions at micro-level simply by adherence to the guidelines' recommendation. Further, I argue that individual claims are subject to the formal principle of equality and the demands of vertical and horizontal equity in a way that gives context- and patient-related equity concerns precedence over equity concerns captured at the macro-level. I conclude that if we aim to achieve just health care, we need to develop a complementary framework for legitimising individual judgment of patients' claims on health care resources. Moreover, I suggest the basic structure of such a framework.

Sources and geographic origin of particulate matter in urban areas of the Danube macro-region: The cases of Zagreb (Croatia), Budapest (Hungary) and Sofia (Bulgaria).

PubMed

Perrone, M G; Vratolis, S; Georgieva, E; Török, S; Šega, K; Veleva, B; Osán, J; Bešlić, I; Kertész, Z; Pernigotti, D; Eleftheriadis, K; Belis, C A

2018-04-01

The contribution of main PM pollution sources and their geographic origin in three urban sites of the Danube macro-region (Zagreb, Budapest and Sofia) were determined by combining receptor and Lagrangian models. The source contribution estimates were obtained with the Positive Matrix Factorization (PMF) receptor model and the results were further examined using local wind data and backward trajectories obtained with FLEXPART. Potential Source Contribution Function (PSCF) analysis was applied to identify the geographical source areas for the PM sources subject to long-range transport. Gas-to-particle transformation processes and primary emissions from biomass burning are the most important contributors to PM in the studied sites followed by re-suspension of soil (crustal material) and traffic. These four sources can be considered typical of the Danube macro-region because they were identified in all the studied locations. Long-range transport was observed of: a) sulphate-enriched aged aerosols, deriving from SO 2 emissions in combustion processes in the Balkans and Eastern Europe and b) dust from the Saharan and Karakum deserts. The study highlights that PM pollution in the studied urban areas of the Danube macro-region is the result of both local sources and long-range transport from both EU and no-EU areas. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Detecting and modelling structures on the micro and the macro scales: Assessing their effects on solute transport behaviour

NASA Astrophysics Data System (ADS)

Haslauer, C. P.; Bárdossy, A.; Sudicky, E. A.

2017-09-01

This paper demonstrates quantitative reasoning to separate the dataset of spatially distributed variables into different entities and subsequently characterize their geostatistical properties, properly. The main contribution of the paper is a statistical based algorithm that matches the manual distinction results. This algorithm is based on measured data and is generally applicable. In this paper, it is successfully applied at two datasets of saturated hydraulic conductivity (K) measured at the Borden (Canada) and the Lauswiesen (Germany) aquifers. The boundary layer was successfully delineated at Borden despite its only mild heterogeneity and only small statistical differences between the divided units. The methods are verified with the more heterogeneous Lauswiesen aquifer K data-set, where a boundary layer has previously been delineated. The effects of the macro- and the microstructure on solute transport behaviour are evaluated using numerical solute tracer experiments. Within the microscale structure, both Gaussian and non-Gaussian models of spatial dependence of K are evaluated. The effects of heterogeneity both on the macro- and the microscale are analysed using numerical tracer experiments based on four scenarios: including or not including the macroscale structures and optimally fitting a Gaussian or a non-Gaussian model for the spatial dependence in the micro-structure. The paper shows that both micro- and macro-scale structures are important, as in each of the four possible geostatistical scenarios solute transport behaviour differs meaningfully.

Figure of merit for macrouniformity based on image quality ruler evaluation and machine learning framework

NASA Astrophysics Data System (ADS)

Wang, Weibao; Overall, Gary; Riggs, Travis; Silveston-Keith, Rebecca; Whitney, Julie; Chiu, George; Allebach, Jan P.

2013-01-01

Assessment of macro-uniformity is a capability that is important for the development and manufacture of printer products. Our goal is to develop a metric that will predict macro-uniformity, as judged by human subjects, by scanning and analyzing printed pages. We consider two different machine learning frameworks for the metric: linear regression and the support vector machine. We have implemented the image quality ruler, based on the recommendations of the INCITS W1.1 macro-uniformity team. Using 12 subjects at Purdue University and 20 subjects at Lexmark, evenly balanced with respect to gender, we conducted subjective evaluations with a set of 35 uniform b/w prints from seven different printers with five levels of tint coverage. Our results suggest that the image quality ruler method provides a reliable means to assess macro-uniformity. We then defined and implemented separate features to measure graininess, mottle, large area variation, jitter, and large-scale non-uniformity. The algorithms that we used are largely based on ISO image quality standards. Finally, we used these features computed for a set of test pages and the subjects' image quality ruler assessments of these pages to train the two different predictors - one based on linear regression and the other based on the support vector machine (SVM). Using five-fold cross-validation, we confirmed the efficacy of our predictor.

PSHREG: A SAS macro for proportional and nonproportional subdistribution hazards regression

PubMed Central

Kohl, Maria; Plischke, Max; Leffondré, Karen; Heinze, Georg

2015-01-01

We present a new SAS macro %pshreg that can be used to fit a proportional subdistribution hazards model for survival data subject to competing risks. Our macro first modifies the input data set appropriately and then applies SAS's standard Cox regression procedure, PROC PHREG, using weights and counting-process style of specifying survival times to the modified data set. The modified data set can also be used to estimate cumulative incidence curves for the event of interest. The application of PROC PHREG has several advantages, e.g., it directly enables the user to apply the Firth correction, which has been proposed as a solution to the problem of undefined (infinite) maximum likelihood estimates in Cox regression, frequently encountered in small sample analyses. Deviation from proportional subdistribution hazards can be detected by both inspecting Schoenfeld-type residuals and testing correlation of these residuals with time, or by including interactions of covariates with functions of time. We illustrate application of these extended methods for competing risk regression using our macro, which is freely available at: http://cemsiis.meduniwien.ac.at/en/kb/science-research/software/statistical-software/pshreg, by means of analysis of a real chronic kidney disease study. We discuss differences in features and capabilities of %pshreg and the recent (January 2014) SAS PROC PHREG implementation of proportional subdistribution hazards modelling. PMID:25572709

Physical soil architectural traits are functionally linked to carbon decomposition and bacterial diversity.

PubMed

Rabbi, S M F; Daniel, H; Lockwood, P V; Macdonald, C; Pereg, L; Tighe, M; Wilson, B R; Young, I M

2016-09-12

Aggregates play a key role in protecting soil organic carbon (SOC) from microbial decomposition. The objectives of this study were to investigate the influence of pore geometry on the organic carbon decomposition rate and bacterial diversity in both macro- (250-2000 μm) and micro-aggregates (53-250 μm) using field samples. Four sites of contrasting land use on Alfisols (i.e. native pasture, crop/pasture rotation, woodland) were investigated. 3D Pore geometry of the micro-aggregates and macro-aggregates were examined by X-ray computed tomography (μCT). The occluded particulate organic carbon (oPOC) of aggregates was measured by size and density fractionation methods. Micro-aggregates had 54% less μCT observed porosity but 64% more oPOC compared with macro-aggregates. In addition, the pore connectivity in micro-aggregates was lower than macro-aggregates. Despite both lower μCT observed porosity and pore connectivity in micro-aggregates, the organic carbon decomposition rate constant (Ksoc) was similar in both aggregate size ranges. Structural equation modelling showed a strong positive relationship of the concentration of oPOC with bacterial diversity in aggregates. We use these findings to propose a conceptual model that illustrates the dynamic links between substrate, bacterial diversity, and pore geometry that suggests a structural explanation for differences in bacterial diversity across aggregate sizes.

Physical soil architectural traits are functionally linked to carbon decomposition and bacterial diversity

PubMed Central

Rabbi, S. M. F.; Daniel, H.; Lockwood, P. V.; Macdonald, C.; Pereg, L.; Tighe, M.; Wilson, B. R.; Young, I. M.

2016-01-01

Aggregates play a key role in protecting soil organic carbon (SOC) from microbial decomposition. The objectives of this study were to investigate the influence of pore geometry on the organic carbon decomposition rate and bacterial diversity in both macro- (250–2000 μm) and micro-aggregates (53–250 μm) using field samples. Four sites of contrasting land use on Alfisols (i.e. native pasture, crop/pasture rotation, woodland) were investigated. 3D Pore geometry of the micro-aggregates and macro-aggregates were examined by X-ray computed tomography (μCT). The occluded particulate organic carbon (oPOC) of aggregates was measured by size and density fractionation methods. Micro-aggregates had 54% less μCT observed porosity but 64% more oPOC compared with macro-aggregates. In addition, the pore connectivity in micro-aggregates was lower than macro-aggregates. Despite both lower μCT observed porosity and pore connectivity in micro-aggregates, the organic carbon decomposition rate constant (Ksoc) was similar in both aggregate size ranges. Structural equation modelling showed a strong positive relationship of the concentration of oPOC with bacterial diversity in aggregates. We use these findings to propose a conceptual model that illustrates the dynamic links between substrate, bacterial diversity, and pore geometry that suggests a structural explanation for differences in bacterial diversity across aggregate sizes. PMID:27615807

General Tool for Evaluating High-Contrast Coronagraphic Telescope Performance Error Budgets

NASA Technical Reports Server (NTRS)

Marchen, Luis F.

2011-01-01

The Coronagraph Performance Error Budget (CPEB) tool automates many of the key steps required to evaluate the scattered starlight contrast in the dark hole of a space-based coronagraph. The tool uses a Code V prescription of the optical train, and uses MATLAB programs to call ray-trace code that generates linear beam-walk and aberration sensitivity matrices for motions of the optical elements and line-of-sight pointing, with and without controlled fine-steering mirrors (FSMs). The sensitivity matrices are imported by macros into Excel 2007, where the error budget is evaluated. The user specifies the particular optics of interest, and chooses the quality of each optic from a predefined set of PSDs. The spreadsheet creates a nominal set of thermal and jitter motions, and combines that with the sensitivity matrices to generate an error budget for the system. CPEB also contains a combination of form and ActiveX controls with Visual Basic for Applications code to allow for user interaction in which the user can perform trade studies such as changing engineering requirements, and identifying and isolating stringent requirements. It contains summary tables and graphics that can be instantly used for reporting results in view graphs. The entire process to obtain a coronagraphic telescope performance error budget has been automated into three stages: conversion of optical prescription from Zemax or Code V to MACOS (in-house optical modeling and analysis tool), a linear models process, and an error budget tool process. The first process was improved by developing a MATLAB package based on the Class Constructor Method with a number of user-defined functions that allow the user to modify the MACOS optical prescription. The second process was modified by creating a MATLAB package that contains user-defined functions that automate the process. The user interfaces with the process by utilizing an initialization file where the user defines the parameters of the linear model computations. Other than this, the process is fully automated. The third process was developed based on the Terrestrial Planet Finder coronagraph Error Budget Tool, but was fully automated by using VBA code, form, and ActiveX controls.

A combined use of proximal sensors can magnify the terroir effect of every vintage

NASA Astrophysics Data System (ADS)

Priori, Simone; Bianconi, Nadia; Valboa, Giuseppe; Barbetti, Roberto; Fantappiè, Maria; L'Abate, Giovanni; Lorenzetti, Romina; Mocali, Stefano; Pellegrini, Sergio; Leprini, Marco; Perria, Rita; Storchi, Paolo; Costantini, Edoardo

2014-05-01

Grape composition, which affects the wine sensory qualities, depends on vine features (rootstock, scion, vine health) and vineyard management as much as environmental factors. Mapping soil at the vineyard scale, in particular, helps in optimizing the terroir expression of the wine. The terroir effect however varies every year, in dependence of the interaction between climate and soil. Aim of this research work was to set a methodology to dimension homogeneous harvest zones (HZ) in the vineyard and to test the vintage effect on them. Four terroir macro-units were selected within a wide farm in the Chianti Classico D.O.C.G. district (Siena, Central Italy). The selected macro-units represented the most common viticultural environments of the Chianti Classico D.O.C.G. and they were: 1) hills of high altitude (450-500 m a.s.l.) on feldspathic sandstones, with shallow sandy soils; 2) hills of high altitude (400-500 m a.s.l.) on clayey-calcareous flysches, with stony and calcareous soils; 3) hills of moderate altitude (250-350 m a.s.l.) on Pliocene sandy marine deposits; 4) hills and fluvial terraces of moderate altitude (200-300 m a.s.l., 50-100 m above the present river valley) on ancient fluvial deposits. Selected vineyards of each terroir macro-unit was surveyed by soil proximal sensing, to define two homogeneous zones (HZ) in terms of soil features in each macro-unit. The sensors used were: i) γ-ray spectrometer, to map the variability of soil surface in terms of parent material, texture and stoniness; ii) electromagnetic induction sensor (EMI) to determine the spatial variability of texture and soil moisture in the sub-surface horizons; iii) time domain reflectometry (TDR), to measure soil moisture content in the sub-surface soil horizon (30-50 cm). TDR measurements were performed in fixed points (about 1 each 1,000 m2) three times a year, during spring shoot growth (beginning of April), berries veraison (end of July-beginning of August) and final ripening phase before harvest (September). The moisture content was interpolated on the total surface of the experimental vineyards by regression kriging using the γ-ray and EMI proximal data. HZ were mapped according to several parameters, mainly moisture content homogeneity and soil features, but also farm requirements, like size and simplified geometry for hand-made grape harvesting. Each area should have been about 15,000 m2 in size, so to allow an harvest of about 9 tons of grape and a wine-making in an ordinary vat of the winery. After a six-months aging, the wines were analyzed and tasted by a panel of 10 experts to characterize their quality and peculiarities. To determine grape homogeneity within HZ, three experimental sites for each HZ were selected to determine plant water stress, grape production and wine quality obtained by micro wine-making. After two vintages (2012 and 2013) the main results were: i) terroir macro-units influenced the wine quality and peculiarities in both vintages; ii) HZ strongly magnified wine peculiarities in three-fourths of macro-units in 2012 vintage. In the 2013 vintage instead, characterized by a rainy early summer, the differences between the HZ in each macro-area were less evident. Concluding, the preliminary results of the work seemed to indicate a fruitful use of the HZ within macro-areas, but not every vintage.

Nano/macro porous bioactive glass scaffold

NASA Astrophysics Data System (ADS)

Wang, Shaojie

Bioactive glass (BG) and ceramics have been widely studied and developed as implants to replace hard tissues of the musculo-skeletal system, such as bones and teeth. Recently, instead of using bulk materials, which usually do not degrade rapidly enough and may remain in the human body for a long time, the idea of bioscaffold for tissue regeneration has generated much interest. An ideal bioscaffold is a porous material that would not only provide a three-dimensional structure for the regeneration of natural tissue, but also degrade gradually and, eventually be replaced by the natural tissue completely. Among various material choices the nano-macro dual porous BG appears as the most promising candidate for bioscaffold applications. Here macropores facilitate tissue growth while nanopores control degradation and enhance cell response. The surface area, which controls the degradation of scaffold can also be tuned by changing the nanopore size. However, fabrication of such 3D structure with desirable nano and macro pores has remained challenging. In this dissertation, sol-gel process combined with spinodal decomposition or polymer sponge replication method has been developed to fabricate the nano-macro porous BG scaffolds. Macropores up to 100microm are created by freezing polymer induced spinodal structure through sol-gel transition, while larger macropores (>200um) of predetermined size are obtained by the polymer sponge replication technique. The size of nanopores, which are inherent to the sol-gel method of glass fabrication, has been tailored using several approaches: Before gel point, small nanopores are generated using acid catalyst that leads to weakly-branched polymer-like network. On the other hand, larger nanopores are created with the base-catalyzed gel with highly-branched cluster-like structure. After the gel point, the nanostructure can be further modified by manipulating the sintering temperature and/or the ammonia concentration used in the solvent exchange process. Although both techniques lower the surface area of BG scaffolds, the temperature-dependent sintering process closes nanopores through densification, while the concentration-dependent solvent exchange process enlarges nanopores through Ostwald-ripening type coarsening. Therefore, nanopore size and surface area of BG scaffold are independently controlled using these methods. In vitro cell and in vivo animal tissue responses have been investigated to evaluate the performance of the nano-macro porous BG scaffold. The cells are found to migrate and penetrate deep into the 3D nano-macro porous structure, while exhibiting excellent adhesion to the bioscaffold surface. Importantly, the new tissue with both blood vessels and collagen fibers is formed deep inside the implanted scaffolds without obvious inflammatory reaction. Furthermore, our observations show biological benefits of the nanopores in the BG scaffold. In comparison to BG scaffold without nanopores, cells migrate and penetrate into nano-macro dual-porous BG scaffold faster and deeper mainly because of the increase of surface area. To study the effect of nanopore topography, we fabricated BG scaffolds with the same surface area but different nanopore sizes. It is found that the initial cell attachment is significantly enhanced on the BG scaffold with the same surface area but smaller nanopores size, indicating that the nanopore topography strongly influences the performance of BG scaffold. In conclusion, the present results demonstrate most clearly the usefulness of our nano-macro dual-porous BG as a novel and superior 3D bioscaffold for regenerative medicine and hard tissue engineering.

Influence of pore structure on carbon retention/loss in soil macro-aggregates

NASA Astrophysics Data System (ADS)

Quigley, Michelle; Kravchenko, Alexandra; Rivers, Mark

2017-04-01

Carbon protection within soil macro-aggregates is an important component of soil carbon sequestration. Pores, as the transportation network for microorganisms, water, air and nutrients within macro-aggregates, are among the factors controlling carbon protection through restricting physical accessibility of carbon to microorganisms. The understanding of how the intra-aggregate pore structure relates to the degree of carbon physical protection, however, is currently lacking. This knowledge gap can lead to potentially inaccurate models and predictions of soil carbon's fate and storage in future changing climates. This study utilized the natural isotopic difference between C3 and C4 plants to trace the location of newly added carbon within macro-aggregates before and after decomposition and explored how location of this carbon relates to characteristics of intra-aggregate pores. To mimic the effect of decomposition, aggregates were incubated at 23˚ C for 28 days. Computed micro-tomographic images were used to determine pore characteristics at 6 μm resolution before and after incubation. Soil (0-10 cm depth) from a 20 year continuous corn (C4 plant) experiment was used. Two soil treatments were considered: 1) "destroyed-structure", where 1 mm sieved soil was used and 2) "intact-structure", where intact blocks of soil were used. Cereal rye (Secale cereale L.) (C3 plant) was grown in the planting boxes (2 intact, 3 destroyed, and one control) for three months in a greenhouse. From each box, ˜5 macro-aggregates of ˜5 mm size were collected for a total of 27 macro-aggregates. Half of the aggregates were cut into 5-11 sections, with relative positions of the sections within the aggregate recorded, and analyzed for δ13C. The remaining aggregates were incubated and then subjected to cutting and δ13C analysis. While there were no significant differences between the aggregate pore size distributions of the two treatments, the roles that specific pores sizes played in carbon protect were disparate. In intact-structure aggregates, prior to incubation, there was no association between carbon distribution and pores. After incubation, significant correlations (α=0.05) were observed between abundance of 6-40 μm pores and both soil organic carbon (SOC) and δ13C. Sections containing more 6-40 μm pores also had increased amounts of SOC (r2=0.23) with higher presence of C4 carbon (r2=0.27). This indicates preferential preservation of older carbon in the pores of this size range. Prior to incubation, destroyed-structure aggregates had higher amounts of C3 carbon associated with 40-95 μm pores (r2=0.14), pointing to a greater presence of newly added carbon within these pores. However, after incubation there was a significant loss of SOC from these pores (r2=0.22) and, specifically, the loss of C3 carbon (r2=0.16). In the studied soil, pores of 6-40 μm size range appeared to control the preservation of older carbon, while 40-95 μm pores controlled the fate of newly added carbon. Older carbon preservation in 6-40 μm pores was mostly observed in macro-aggregates from the soil with intact structure, while the associations between 40-95 μm pores and gains and losses of newly added carbon were primarily observed in the macro-aggregates that were formed anew in the sieved soil during the plant growing experiment.

Dental adhesives and strategies for displacement of water/solvents from collagen fibrils.

PubMed

Matuda, Larissa Sgarbosa de Araújo; Marchi, Giselle Maria; Aguiar, Thaiane Rodrigues; Leme, Ariene Arcas; Ambrosano, Gláucia M B; Bedran-Russo, Ana Karina

2016-06-01

To evaluate the influence of temperature of evaporation in adhesive systems with different solvents on the apparent modulus of elasticity and mass change of macro-hybrid layers modified by proanthocyanidins (PACs). Adhesive resin beams (A) from Single Bond Plus (SB), Excite (EX) and One Step Plus (OS) were prepared after solvent evaporation at 23°C or 40°C (n=12). Macro-hybrid layers (M) (n=12) were prepared using demineralized dentin beams sectioned from extracted human third molars. The demineralized dentin specimens were infiltrated with each one of the three adhesive systems at 23°C or 40°C; with or without prior dentin treatment with PACs for 10min. The apparent modulus of elasticity (E) and mass change (Wmc, %) of adhesives beams and resin-infiltrated specimens were assessed in dry and wet conditions after immersion in water (24h, 1, 3 and 6 months). The E was statistically analyzed by Tukey-Kramer test and the Wmc, % by Kruskal Wallis, and Dunn (α=0.05). Solvent evaporation at 40°C resulted in higher E values for adhesive resin beams at all storage conditions, regardless of the adhesive system (p<0.05). Increased mass loss (3 months: -0.01%; 6 months: -0.05%) was observed in One Step resin beams (p≤0.05). In the macro-hybrid layer models the pretreatment with PACs along with solvent evaporation at 40°C increased E and decreased the Wmc, % (3 months: -2.5; 6 months: 2.75%) for adhesives evaluated over time (p<0.05). No significant differences in ratio (resin/dentin) were found for the macro-hybrid layers (p>0.05). Improved solvent evaporation at higher temperature, and increased collagen cross-linking induced by PACs, enhanced the mechanical properties resulting in highly stable macro-hybrid layers over 6 months storage. Copyright © 2016 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.