Effects of polymorphisms in beta1-adrenoceptor and alpha-subunit of G protein on heart rate and blood pressure during exercise test. The Finnish Cardiovascular Study.

PubMed

Nieminen, Tuomo; Lehtimäki, Terho; Laiho, Jarno; Rontu, Riikka; Niemelä, Kari; Kööbi, Tiit; Lehtinen, Rami; Viik, Jari; Turjanmaa, Väinö; Kähönen, Mika

2006-02-01

We tested whether the Arg389Gly and Ser49Gly polymorphisms of the beta1-adrenergic receptor gene ADRB1 and the T393C polymorphism of the G protein alpha-subunit gene GNAS1 modulate heart rate (HR) and blood pressure responses during an exercise stress test. The study population comprised 890 participants (563 men and 327 women, mean age 58.1 +/- 12.6 yr) of the Finnish Cardiovascular Study. Their HR, systolic (SAP), and diastolic arterial pressures (DAP) at rest, during exercise, and 4 min after the test were measured and analyzed by repeated-measurement ANOVA (RANOVA). Genotypes were detected by TaqMan 5' nuclease assay. In all subjects, and in men and women separately, the T393C of GNAS1 was the only polymorphism with genotype x time interaction in HR over the three study phases (P = 0.04, RANOVA). None of the polymorphisms presented genotype x time interaction in SAP or DAP responses (P > 0.10, RANOVA). In all subjects at rest, the Ser49Gly polymorphism of ADRB1 tended (P = 0.06, ANOVA) to differentiate HR. Arg389Gly polymorphism of ADRB1 affected maximal SAP during exercise (P = 0.04, ANOVA) and the change in SAP from rest to maximal (P = 0.03, ANOVA). Arg389 homozygotes, particularly men, were less likely to have ventricular extrasystoles during the exercise (odds ratio = 0.68, 95% confidence interval = 0.51-0.91, P = 0.009, and odds ratio = 0.60, 95% confidence interval = 0.42-0.86, P = 0.006, respectively) than did Gly389 carriers. In conclusion, polymorphisms examined appear to have modulatory effects on hemodynamics in a clinical exercise test setting. However, the effects in absolute numbers were minor and clinically possibly insignificant.

Race Differences on the Developmental Test of Visual Motor Integration, the Slosson Intelligence Test, and the ABC Inventory.

ERIC Educational Resources Information Center

Schooler, Douglas L.; Anderson, Robert L.

1979-01-01

Analyzes preschoolers' scores on the Developmental Test of Visual Motor Integration (VMI), the Slosson Intelligence Test (SIT), and the ABC Inventory (ABCI). Separate ANOVAs reveal no race effect on the VMI. Race differences favoring Whites are found for SIT and ABCI. There were no effects for sex on any measure. (Author)

A Search for Factors Causing Training Costs to Rise by Examining the U. S. Navy’s AT, AW, and AX Ratings during their First Enlistment Period

DTIC Science & Technology

1986-09-01

HYPOTHESIS TEST .................... 20 III. TIME TO GET RATED TWO FACTOR ANOVA RESULTS ......... 23 IV. TIME TO GET RATED TUKEY’S PAIRED COvfl’PARISON... TEST RESULTS A ............................................ 24 V. TIME TO GET RATED TUKEY’S PAIRED COMPARISON TEST RESULTS B...25 VI. SINGLE FACTOR ANOVA HYPOTHESIS TEST #I............... 27 VII. AT: TIME TO GET RATED ANOVA TEST RESULTS ............. 30

Comparison of the Effects of Lanolin, Peppermint, and Dexpanthenol Creams on Treatment of Traumatic Nipples in Breastfeeding Mothers.

PubMed

Shanazi, Mahnaz; Farshbaf Khalili, Azizeh; Kamalifard, Mahin; Asghari Jafarabadi, Mohammad; Masoudin, Kazhal; Esmaeli, Fariba

2015-12-01

Traumatic nipple is among the most common problems of the breastfeeding period which leads to early cessation of breastfeeding. The study aimed to compare the effects of the lanolin, peppermint, and dexpanthenol creams on the treatment of traumatic nipples. This double-blind randomized controlled trial was carried out on 126 breastfeeding mothers. The mothers had visited at the health centers and children's hospitals in Sanandaj City. The selected participants were randomly divided into the following three groups of lanolin, peppermint, and dexpanthenol cream groups. Nipple pain was measured using the Store scale while trauma was measured with the Champion scale. Analyses were carried out through the Kruskal-Wallis test, Chi-square, ANOVA, and repeated measures ANOVA by using SPSS software ver. 13. The result showed that the mean score of nipple pain and nipple trauma at the prior to intervention stage, third, seventh, and fourteenth days of intervention was not significantly different between three groups. But, repeated measures ANOVA showed a significant difference in comparison of the four time periods of intervention in each group. RESULTS of this study revealed that the lanolin, peppermint, and dexpanthenol medicines had similar therapeutic effects on traumatic nipple.

Using Performance Methods to Enhance Students' Reading Fluency

ERIC Educational Resources Information Center

Young, Chase; Valadez, Corinne; Gandara, Cori

2016-01-01

The quasi-experimental study examined the effects of pairing Rock and Read with Readers Theater and only Rock and Read on second grade students' reading fluency scores. The 51 subjects were pre- and post-tested on five different reading fluency measures. A series of 3 × 2 repeated measures ANOVAs revealed statistically significant interaction…

Reinforcing Sampling Distributions through a Randomization-Based Activity for Introducing ANOVA

ERIC Educational Resources Information Center

Taylor, Laura; Doehler, Kirsten

2015-01-01

This paper examines the use of a randomization-based activity to introduce the ANOVA F-test to students. The two main goals of this activity are to successfully teach students to comprehend ANOVA F-tests and to increase student comprehension of sampling distributions. Four sections of students in an advanced introductory statistics course…

Blood flow patterns during incremental and steady-state aerobic exercise.

PubMed

Coovert, Daniel; Evans, LeVisa D; Jarrett, Steven; Lima, Carla; Lima, Natalia; Gurovich, Alvaro N

2017-05-30

Endothelial shear stress (ESS) is a physiological stimulus for vascular homeostasis, highly dependent on blood flow patterns. Exercise-induced ESS might be beneficial on vascular health. However, it is unclear what type of ESS aerobic exercise (AX) produces. The aims of this study are to characterize exercise-induced blood flow patterns during incremental and steady-state AX. We expect blood flow pattern during exercise will be intensity-dependent and bidirectional. Six college-aged students (2 males and 4 females) were recruited to perform 2 exercise tests on cycleergometer. First, an 8-12-min incremental test (Test 1) where oxygen uptake (VO2), heart rate (HR), blood pressure (BP), and blood lactate (La) were measured at rest and after each 2-min step. Then, at least 48-hr. after the first test, a 3-step steady state exercise test (Test 2) was performed measuring VO2, HR, BP, and La. The three steps were performed at the following exercise intensities according to La: 0-2 mmol/L, 2-4 mmol/L, and 4-6 mmol/L. During both tests, blood flow patterns were determined by high-definition ultrasound and Doppler on the brachial artery. These measurements allowed to determine blood flow velocities and directions during exercise. On Test 1 VO2, HR, BP, La, and antegrade blood flow velocity significantly increased in an intensity-dependent manner (repeated measures ANOVA, p<0.05). Retrograde blood flow velocity did not significantly change during Test 1. On Test 2 all the previous variables significantly increased in an intensity-dependent manner (repeated measures ANOVA, p<0.05). These results support the hypothesis that exercise induced ESS might be increased in an intensity-dependent way and blood flow patterns during incremental and steady-state exercises include both antegrade and retrograde blood flows.

Effects of measurement errors on psychometric measurements in ergonomics studies: Implications for correlations, ANOVA, linear regression, factor analysis, and linear discriminant analysis.

PubMed

Liu, Yan; Salvendy, Gavriel

2009-05-01

This paper aims to demonstrate the effects of measurement errors on psychometric measurements in ergonomics studies. A variety of sources can cause random measurement errors in ergonomics studies and these errors can distort virtually every statistic computed and lead investigators to erroneous conclusions. The effects of measurement errors on five most widely used statistical analysis tools have been discussed and illustrated: correlation; ANOVA; linear regression; factor analysis; linear discriminant analysis. It has been shown that measurement errors can greatly attenuate correlations between variables, reduce statistical power of ANOVA, distort (overestimate, underestimate or even change the sign of) regression coefficients, underrate the explanation contributions of the most important factors in factor analysis and depreciate the significance of discriminant function and discrimination abilities of individual variables in discrimination analysis. The discussions will be restricted to subjective scales and survey methods and their reliability estimates. Other methods applied in ergonomics research, such as physical and electrophysiological measurements and chemical and biomedical analysis methods, also have issues of measurement errors, but they are beyond the scope of this paper. As there has been increasing interest in the development and testing of theories in ergonomics research, it has become very important for ergonomics researchers to understand the effects of measurement errors on their experiment results, which the authors believe is very critical to research progress in theory development and cumulative knowledge in the ergonomics field.

Comparison of the Effects of Lanolin, Peppermint, and Dexpanthenol Creams on Treatment of Traumatic Nipples in Breastfeeding Mothers

PubMed Central

Shanazi, Mahnaz; Farshbaf Khalili, Azizeh; Kamalifard, Mahin; Asghari Jafarabadi, Mohammad; Masoudin, Kazhal; Esmaeli, Fariba

2015-01-01

Introduction: Traumatic nipple is among the most common problems of the breastfeeding period which leads to early cessation of breastfeeding. The study aimed to compare the effects of the lanolin, peppermint, and dexpanthenol creams on the treatment of traumatic nipples. Methods: This double-blind randomized controlled trial was carried out on 126 breastfeeding mothers. The mothers had visited at the health centers and children’s hospitals in Sanandaj City. The selected participants were randomly divided into the following three groups of lanolin, peppermint, and dexpanthenol cream groups. Nipple pain was measured using the Store scale while trauma was measured with the Champion scale. Analyses were carried out through the Kruskal–Wallis test, Chi-square, ANOVA, and repeated measures ANOVA by using SPSS software ver. 13. Results: The result showed that the mean score of nipple pain and nipple trauma at the prior to intervention stage, third, seventh, and fourteenth days of intervention was not significantly different between three groups. But, repeated measures ANOVA showed a significant difference in comparison of the four time periods of intervention in each group. Conclusion: Results of this study revealed that the lanolin, peppermint, and dexpanthenol medicines had similar therapeutic effects on traumatic nipple. PMID:26744729

Changes in lipid profile variables in response to submaximal and maximal exercise in trained cyclists.

PubMed

El-Sayed, M S; Rattu, A J

1996-01-01

This study examined the effect of prolonged submaximal exercise followed by a self-paced maximal performance test on cholesterol (T-Chol), triglycerides (TG), and high-density lipoprotein cholesterol (HDLC). Nine trained male athletes cycled at 70 percent of maximal oxygen consumption for 60 min, followed by a self-paced maximal ride for 10 min. Venous blood samples were obtained at rest, at 30 and 60 min during submaximal exercise, and immediately after the performance test. Lactic acid, haematocrit (Hct), haemoglobin (Hb), T-Chol and TG were measured in the blood, while plasma was assayed for HDL-C. Plasma volume changes in response to exercise were calculated from Hct and Hb values and all lipid measurements were corrected accordingly. In order to ascertain the repeatability of lipid responses to exercise, all subjects were re-tested under identical testing conditions and experimental protocols. When data obtained during the two exercise trials were analysed by two-way ANOVA no significant differences (P > 0.05) between tests were observed. Consequently the data obtained during the two testing trials were pooled and analysed by one-way ANOVA. Blood lactic acid increased nonsignificantly (P > 0.05) during the prolonged submaximal test, but rose markedly (P <0.05) following the performance ride. Lipid variables ascertained at rest were within the normal range for healthy subjects. ANOVA showed that blood T-Chol and TG were unchanged (P > 0.05), whereas HDL-C rose significantly (P <0.05) in response to exercise. Post hoc analyses indicated that the latter change was due to a significant rise in HDL-C after the performance ride. It is concluded that apparent favourable changes in lipid profile variables occur in response to prolonged submaximal exercise followed by maximal effort, and these changes showed a good level of agreement over the two testing occasions.

Surface changes of enamel after brushing with charcoal toothpaste

NASA Astrophysics Data System (ADS)

Pertiwi, U. I.; Eriwati, Y. K.; Irawan, B.

2017-08-01

The aim of this study was to determine the surface roughness changes of tooth enamel after brushing with charcoal toothpaste. Thirty specimens were brushed using distilled water (the first group), Strong® Formula toothpaste (the second group), and Charcoal® Formula toothpaste for four minutes and 40 seconds (equivalent to one month) and for 14 minutes (equivalent to three months) using a soft fleece toothbrush with a mass of 150 gr. The roughness was measured using a surface roughness tester, and the results were tested with repeated ANOVA test and one-way ANOVA. The value of the surface roughness of tooth enamel was significantly different (p<0.05) after brushing for an equivalent of one month and an equivalent of three months. Using toothpaste containing charcoal can increase the surface roughness of tooth enamel.

Teaching Principles of Inference with ANOVA

ERIC Educational Resources Information Center

Tarlow, Kevin R.

2016-01-01

Analysis of variance (ANOVA) is a test of "mean" differences, but the reference to "variances" in the name is often overlooked. Classroom activities are presented to illustrate how ANOVA works with emphasis on how to think critically about inferential reasoning.

The effect of a family-based intervention with a cognitive-behavioral approach on elder abuse.

PubMed

Khanlary, Zahra; Maarefvand, Masoomeh; Biglarian, Akbar; Heravi-Karimooi, Majideh

2016-01-01

Elder abuse may become a health issue in developing countries, including Iran. The purpose of this investigation was to study the effectiveness of Family-Based Cognitive-Behavioral Social Work (FBCBSW) in reducing elder abuse. In a randomized clinical trial in Iran, 27 elders participated in intervention and control groups. The intervention groups received a five-session FBCBSW intervention and completed the Domestic-Elder-Abuse-Questionnaire (DEAQ), which evaluates elder abuse at baseline and follow-ups. Repeated measures of analysis of variance (ANOVA) and the Wilcoxon test were used to analyze the data. The repeated measures ANOVA revealed that FBCBSW was successful in reducing elder abuse. The Wilcoxon test indicated that emotional neglect, care neglect, financial neglect, curtailment of personal autonomy, psychological abuse, and financial abuse significantly decreased over time, but there was no statistically significant difference in physical abuse before and after the intervention. The findings from this study suggest that FBCBSW is a promising approach to reducing elder abuse and warrants further study with larger samples.

The Association between Working Memory and Educational Attainment as Measured in Different Mathematical Subtopics in the Swedish National Assessment: Primary Education

ERIC Educational Resources Information Center

Nyroos, Mikaela; Wiklund-Hornqvist, Carola

2012-01-01

The aim of this study was to examine the relationship between working memory capacity and mathematical performance measured by the national curriculum assessment in third-grade children (n = 40). The national tests concerned six subareas within mathematics. One-way ANOVA, two-tailed Pearson correlation and multiple regression analyses were…

Overcoming misconceptions of graph interpretation of kinematics motion using calculator based rangers

NASA Astrophysics Data System (ADS)

Olson, John R.

This is a quasi-experimental study of 261 first year high school students that analyzes gains made through the use of calculator based rangers attached to calculators. The study has qualitative components but is based on quantitative tests. Biechner's TUG-K test was used for the pretest, posttest, and post-posttest. The population was divided into one group that predicted the results before using the CBRs and another that did not predict first but completed the same activities. The data for the groups was further disaggregated into learning style groups (based on Kolb's Learning Styles Inventory), type of class (advanced vs. general physics), and gender. Four instructors used the labs developed by the author for this study and created significant differences between the groups by instructor based on interviews, participant observation and one way ANOVA. No significant differences were found between learning styles based on MANOVA. No significant differences were found between predict and nonpredict groups for the one way ANOVAs or MANOVA, however, some differences do exist as measured by a survey and participant observation. Significant differences do exist between gender and type of class (advanced/general) based on one way ANOVA and MANOVA. The males outscored the females on all tests and the advanced physics scored higher than the general physics on all tests. The advanced physics scoring higher was expected but the difference between genders was not.

An evaluation of the lag of accommodation using photorefraction.

PubMed

Seidemann, Anne; Schaeffel, Frank

2003-02-01

The lag of accommodation which occurs in most human subjects during reading has been proposed to explain the association between reading and myopia. However, the measured lags are variable among different published studies and current knowledge on its magnitude rests largely on measurements with the Canon R-1 autorefractor. Therefore, we have measured it with another technique, eccentric infrared photorefraction (the PowerRefractor), and studied how it can be modified. Particular care was taken to ensure correct calibration of the instrument. Ten young adult subjects were refracted both in the fixation axis of the right eye and from the midline between both eyes, while they read text both monocularly and binocularly at 1.5, 2, 3, 4 and 5 D distance ("group 1"). A second group of 10 subjects ("group 2"), measured from the midline between both eyes, was studied to analyze the effects of binocular vs monocular vision, addition of +1 or +2 D lenses, and of letter size. Spherical equivalents (SE) were analyzed in all cases. The lag of accommodation was variable among subjects (standard deviations among groups and viewing distances ranging from 0.18 to 1.07 D) but was significant when the measurements were done in the fixation axis (0.35 D at 3 D target distance to 0.60 D at 5 D with binocular vision; p<0.01 or better all cases). Refracting from the midline between both eyes tended to underestimate the lag of accommodation although this was significant only at 5 D (ANOVA: p<0.0001, post hoc t-test: p<0.05). There was a small improvement in accommodation precision with binocular compared to monocular viewing but significance was reached only for the 5 D reading target (group 1--lags for a 3/4/5 D target: 0.35 vs 0.41 D/0.48 vs 0.47 D/0.60 vs 0.66 D, ANOVA: p<0.0001, post hoc t-test: p<0.05; group 2--0.29 vs 0.12 D, 0.33 vs 0.16 D, 0.23 vs -0.31 D, ANOVA: p<0.0001, post hoc t-test: p<0.05). Adjusting the letter height for constant angular subtense (0.2 deg) induced scarcely more accommodation than keeping letter size constantly at 3.5 mm (ANOVA: p<0.0001, post hoc t-test: n.s.). Positive trial lenses reduced the lag of accommodation under monocular viewing conditions and even reversed it with binocular vision. After consideration of possible sources of measurement error, the lag of accommodation measured with photorefraction at 3 D (0.41 D SE monocular and 0.35 D SE binocular) was in the range of published values from the Canon R-1 autorefractor. With the measured lag, simulations of the retinal images for a diffraction limited eye suggest surprisingly poor letter contrast on the retina.

A Tutorial for the Student Edition (Release 1.1) of Minitab.

ERIC Educational Resources Information Center

MacFarland, Thomas W.; Hou, Cheng-I

This guide for using Minitab requires DOS version 2.0 or greater, 512K RAM memory, two double-sided diskette drives, and a graphics monitor. Topics covered in the tutorial are Getting started; Installation; Making a data diskette; Entering data; Central tendency and dispersion; t-test; Chi-square test; Oneway ANOVA test; Twoway ANOVA test; and…

Testing Interaction Effects without Discarding Variance.

ERIC Educational Resources Information Center

Lopez, Kay A.

Analysis of variance (ANOVA) and multiple regression are two of the most commonly used methods of data analysis in behavioral science research. Although ANOVA was intended for use with experimental designs, educational researchers have used ANOVA extensively in aptitude-treatment interaction (ATI) research. This practice tends to make researchers…

Comparing Methods to Assess Intraobserver Measurement Error of 3D Craniofacial Landmarks Using Geometric Morphometrics Through a Digitizer Arm.

PubMed

Menéndez, Lumila Paula

2017-05-01

Intraobserver error (INTRA-OE) is the difference between repeated measurements of the same variable made by the same observer. The objective of this work was to evaluate INTRA-OE from 3D landmarks registered with a Microscribe, in different datasets: (A) the 3D coordinates, (B) linear measurements calculated from A, and (C) the six-first principal component axes. INTRA-OE was analyzed by digitizing 42 landmarks from 23 skulls in three events two weeks apart from each other. Systematic error was tested through repeated measures ANOVA (ANOVA-RM), while random error through intraclass correlation coefficient. Results showed that the largest differences between the three observations were found in the first dataset. Some anatomical points like nasion, ectoconchion, temporosphenoparietal, asterion, and temporomandibular presented the highest INTRA-OE. In the second dataset, local distances had higher INTRA-OE than global distances while the third dataset showed the lowest INTRA-OE. © 2016 American Academy of Forensic Sciences.

Planned Comparisons as Better Alternatives to ANOVA Omnibus Tests.

ERIC Educational Resources Information Center

Benton, Roberta L.

Analyses of data are presented to illustrate the advantages of using a priori or planned comparisons rather than omnibus analysis of variance (ANOVA) tests followed by post hoc or posteriori testing. The two types of planned comparisons considered are planned orthogonal non-trend coding contrasts and orthogonal polynomial or trend contrast coding.…

Use of "t"-Test and ANOVA in Career-Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Lee, In Heok; Gemici, Sinan

2012-01-01

Use of t-tests and analysis of variance (ANOVA) procedures in published research from three scholarly journals in career and technical education (CTE) during a recent 5-year period was examined. Information on post hoc analyses, reporting of effect size, alpha adjustments to account for multiple tests, power, and examination of assumptions…

Evaluating the efficacy of a chemistry video game

NASA Astrophysics Data System (ADS)

Shapiro, Marina

A quasi-experimental design pre-test/post-test intervention study utilizing a within group analysis was conducted with 45 undergraduate college chemistry students that investigated the effect of implementing a game-based learning environment into an undergraduate college chemistry course in order to learn if serious educational games (SEGs) can be used to achieve knowledge gains of complex chemistry concepts and to achieve increase in students' positive attitude toward chemistry. To evaluate if students learn chemistry concepts by participating in a chemistry game-based learning environment, a one-way repeated measures analysis of variance (ANOVA) was conducted across three time points (pre-test, post-test, delayed post-test which were chemistry content exams). Results showed that there was an increase in exam scores over time. The results of the ANOVA indicated a statistically significant time effect. To evaluate if students' attitude towards chemistry increased as a result of participating in a chemistry game-based learning environment a paired samples t-test was conducted using a chemistry attitudinal survey by Mahdi (2014) as the pre- and post-test. Results of the paired-samples t-test indicated that there was no significant difference in pre-attitudinal scores and post-attitudinal scores.

Effects of Stress and Social Enrichment on Alcohol Intake, Biological and Psychological Stress Responses in Rats

DTIC Science & Technology

2010-06-28

Variance (ANOVA) Table for Serum Corticosterone Table 15 – Repeated-Measures ANOVA Table for Body Weight, Within-Subject Effects Table 16...Serum Ethanol Concentration Table 21 – Repeated-Measures ANOVA Table for Rotarod Performance, Within- Subject Effects Table 22 – Repeated...and that this social environment seems to attenuate the effects of predator and unpredictable stressors on serum corticosterone . In summary, stressed

The use of analysis of variance procedures in biological studies

USGS Publications Warehouse

Williams, B.K.

1987-01-01

The analysis of variance (ANOVA) is widely used in biological studies, yet there remains considerable confusion among researchers about the interpretation of hypotheses being tested. Ambiguities arise when statistical designs are unbalanced, and in particular when not all combinations of design factors are represented in the data. This paper clarifies the relationship among hypothesis testing, statistical modelling and computing procedures in ANOVA for unbalanced data. A simple two-factor fixed effects design is used to illustrate three common parametrizations for ANOVA models, and some associations among these parametrizations are developed. Biologically meaningful hypotheses for main effects and interactions are given in terms of each parametrization, and procedures for testing the hypotheses are described. The standard statistical computing procedures in ANOVA are given along with their corresponding hypotheses. Throughout the development unbalanced designs are assumed and attention is given to problems that arise with missing cells.

Anteroposterior condylar position: a comparative study between subjects with normal occlusion and patients with Class I, Class II Division 1, and Class III malocclusions.

PubMed

Fraga, Marcelo Reis; Rodrigues, Andréia Fialho; Ribeiro, Luiz Claudio; Campos, Marcio José da Silva; Vitral, Robert Willer Farinazzo

2013-10-29

The present study aimed to determine and compare the anteroposterior position of the condyle in the mandibular fossa between groups of asymptomatic subjects with normal occlusion and asymptomatic subjects with Class I, Class II Division 1, and Class III malocclusions. Thirty persons with normal occlusion, 30 with Class I malocclusion, 30 with Class II Division 1, and 30 with Class III had computed tomography scans of their temporomandibular joints. The anterior joint space/posterior joint space (AJS/PJS) ratio was determined for the right and left joints. The paired t test was used to analyze the AJS/PJS ratio between both sides for each group. The ANOVA test was applied to verify the differences between the groups for the measurements of the right and left sides. In case the ANOVA test confirmed significance, the Dunnett's t test was performed to compare the groups of malocclusion with that of normal occlusion. The paired t test between the AJS/PJS relationships in the right and left sides showed the following p values: Class I (0.168), Class II Division 1 (0.662), Class III (0.991), and normal occlusion (0.390). The ANOVA test showed a p value of 0.445 for the comparisons of the right side and 0.040 for the left side. The Dunnett's t test demonstrated a statistically significant difference between the Class II group and the normal occlusion group (p value of 0.026) in the joints of the left side. Bilateral symmetry and lack of condyle centralization were common characteristics among all groups. The greatest condylar decentralization was observed in the Class II group, whereas the least condylar decentralization was found in the normal occlusion group.

Subtle Cognitive Effects of Moderate Hypoxia

DTIC Science & Technology

2009-08-01

using SPSS® 13.0 with significance set at an alpha level of .05 for all statistical tests. A repeated measures analysis of variance (ANOVA) was...there was not statistically significant change in reaction time (p=.781), accuracy (p=.152), or throughout (p=.967) with increasing altitude. The...results indicate that healthy individuals aged 19 to 45 years do not experience significant cognitive deficit, as measured by the CogScreen®-HE, when

Effect of a Trampoline Exercise on the Anthropometric Measures and Motor Performance of Adolescent Students

PubMed Central

Aalizadeh, Bahman; Mohammadzadeh, Hassan; Khazani, Ali; Dadras, Ali

2016-01-01

Background: Physical exercises can influence some anthropometric and fitness components differently. The aim of present study was to evaluate how a relatively long-term training program in 11-14-year-old male Iranian students affects their anthropometric and motor performance measures. Methods: Measurements were conducted on the anthropometric and fitness components of participants (n = 28) prior to and following the program. They trained 20 weeks, 1.5 h/session with 10 min rest, in 4 times trampoline training programs per week. Motor performance of all participants was assessed using standing long jump and vertical jump based on Eurofit Test Battery. Results: The analysis of variance (ANOVA) repeated measurement test showed a statistically significant main effect of time in calf girth P = 0.001, fat% P = 0.01, vertical jump P = 0.001, and long jump P = 0.001. The ANOVA repeated measurement test revealed a statistically significant main effect of group in fat% P = 0.001. Post hoc paired t-tests indicated statistical significant differences in trampoline group between the two measurements about calf girth (t = −4.35, P = 0.001), fat% (t = 5.87, P = 0.001), vertical jump (t = −5.53, P = 0.001), and long jump (t = −10.00, P = 0.001). Conclusions: We can conclude that 20-week trampoline training with four physical activity sessions/week in 11–14-year-old students seems to have a significant effect on body fat% reduction and effective results in terms of anaerobic physical fitness. Therefore, it is suggested that different training model approach such as trampoline exercises can help students to promote the level of health and motor performance. PMID:27512557

Effect of a Trampoline Exercise on the Anthropometric Measures and Motor Performance of Adolescent Students.

PubMed

Aalizadeh, Bahman; Mohammadzadeh, Hassan; Khazani, Ali; Dadras, Ali

2016-01-01

Physical exercises can influence some anthropometric and fitness components differently. The aim of present study was to evaluate how a relatively long-term training program in 11-14-year-old male Iranian students affects their anthropometric and motor performance measures. Measurements were conducted on the anthropometric and fitness components of participants (n = 28) prior to and following the program. They trained 20 weeks, 1.5 h/session with 10 min rest, in 4 times trampoline training programs per week. Motor performance of all participants was assessed using standing long jump and vertical jump based on Eurofit Test Battery. The analysis of variance (ANOVA) repeated measurement test showed a statistically significant main effect of time in calf girth P = 0.001, fat% P = 0.01, vertical jump P = 0.001, and long jump P = 0.001. The ANOVA repeated measurement test revealed a statistically significant main effect of group in fat% P = 0.001. Post hoc paired t-tests indicated statistical significant differences in trampoline group between the two measurements about calf girth (t = -4.35, P = 0.001), fat% (t = 5.87, P = 0.001), vertical jump (t = -5.53, P = 0.001), and long jump (t = -10.00, P = 0.001). We can conclude that 20-week trampoline training with four physical activity sessions/week in 11-14-year-old students seems to have a significant effect on body fat% reduction and effective results in terms of anaerobic physical fitness. Therefore, it is suggested that different training model approach such as trampoline exercises can help students to promote the level of health and motor performance.

Color alteration, hydrogen peroxide diffusion, and cytotoxicity caused by in-office bleaching protocols.

PubMed

de Almeida, Letícia Cunha Amaral Gonzaga; Soares, Diana Gabriela; Gallinari, Marjorie Oliveira; de Souza Costa, Carlos Alberto; Dos Santos, Paulo Henrique; Briso, André Luiz Fraga

2015-04-01

This study evaluated the color alteration, cytotoxicity, and hydrogen peroxide (HP) diffusion associated with different in-office bleaching protocols. Bovine enamel/dentin disks were subjected to three bleaching sessions with 35 % HP (three 15-min applications), 35 % HP (one 45-min application), or 20 % HP (one 45-min application). The control group was not bleached. Before bleaching, the disks were adapted to artificial pulp chambers positioned in compartments containing 1 ml of acetate buffer or medium, so that the dentin remained in contact with these substances. Immediately after bleaching, the HP that diffused through the disks was stabilized by acetate buffer and was quantified (two-way repeated measures ANOVA/Fisher's protected least significant difference (PLSD) test; α = 5 %). Cells of mouse dental papilla cell-23 (MDPC-23) were incubated in this culture media for 1 h, followed by analysis of cellular metabolism (methyl tetrazolium assay) (one-way ANOVA/Tukey test; α = 5 %) and morphology (scanning electron microscopy). The specimen color alteration (ΔE) was analyzed by reflection spectrophotometry (two-way repeated measures ANOVA/Fisher's PLSD test; α = 5 %). All protocols showed equal effectiveness at the end of the treatment. HP diffusion was significantly higher in the groups bleached with 35 % HP. Reapplication of 35 % HP resulted in increased diffusion only in the first session; however, the decrease in cell metabolism was similar for all studied protocols. Despite greater peroxide diffusion in the groups treated with 35 % HP, all protocols showed the same effectiveness and were cytotoxic to MDPC-23 cells. Bleaching protocols using high HP concentrations should be avoided because they exert aggressive actions on odontoblast-like cells.

The Unsupported Upper Limb Exercise Test in People Without Disabilities: Assessing the Within-Day Test-Retest Reliability and the Effects of Age and Gender.

PubMed

Oliveira, Ana; Cruz, Joana; Jácome, Cristina; Marques, Alda

2018-01-01

Purpose: To estimate the within-day test-retest reliability and standard error of measurement (SEM) of the unsupported upper limb exercise test (UULEX) in adults without disabilities and to determine the effects of age and gender on performance of the UULEX. Method: A cross-sectional study was conducted with 100 adults without disabilities (44 men, mean age 44.2 [SD 26] y; 56 women, mean age 38.1 [SD 24.1] y). Participants performed three UULEX tests to establish within-day reliability, measured using an intra-class correlation coefficient (ICC) model 2 (two-way random effects) with a single rater (ICC[2,1]) and SEM. The effects of age and gender were examined using two-factor mixed-design analysis of variance (ANOVA) and one-way repeated-measures ANOVA. For analysis purposes, four sub-groups were created: younger adults, older adults, men, and women. Results: Excellent within-day reliability and a small SEM were found in the four sub-groups (younger adults: ICC[2,1]=0.88; 95% CI: 0.82, 0.92; SEM∼40 s; older adults: ICC[2,1]=0.82; 95% CI: 0.72, 0.90; SEM∼50 s; men: ICC[2,1]=0.93; 95% CI: 0.88, 0.96; SEM∼30 s; women: ICC[2,1]=0.85; 95% CI: 0.78, 0.91; SEM∼45 s). Younger adults took, on average, 308.24 seconds longer than older adults to perform the test; older adults performed significantly better on the third test ( p <0.0001; η 2 =0.096). Gender effects were not found ( p >0.05). Conclusion: The within-day test-retest reliability and SEM values of the UULEX may be used to define the magnitude of the error obtained with repeated measures. One UULEX test seems to be adequate for younger adults to achieve reliable results, whereas three tests seem to be needed for older adults.

In vitro assessments of experimental NaF dentifrices containing a prospective calcium phosphate technology.

PubMed

Karlinsey, Robert L; Mackey, Allen C; Stookey, George K; Pfarrer, Aaron M

2009-06-01

To determine the fluoride dose response of experimental NaF dentifrices containing a prospective calcium phosphate technology, along with the corresponding relative enamel and dentin abrasion values. 3 mm diameter bovine enamel specimens were mounted, ground and polished, and softened in a carbopol-lactic acid solution (pH = 5.0) for 36 hours at 37 degrees C. Specimens were then measured for baseline Vickers microhardness and stratified (N = 18, mean VHN = 33) into eight groups. These groups consisted of a placebo paste, four test dentifrices (A, B, C, D) with three of the four (A, B, C) containing a promising calcium phosphate ingredient, Crest Cavity Protection, MI Paste Plus, and PreviDent Booster 5000. The groups were cycled in a lesion reversal pH cycling model consisting of four 2-minute treatment periods (diluted 1:3 with DI water) and one 4-hour acid challenge (carbopol-lactic acid, pH = 5.0) per day. Between these events, specimens were immersed in artificial saliva (pH = 7.0). After 20 days of cycling, the specimens were microdrilled and analyzed for fluoride content, and also measured for Vickers surface microhardness after 10 and 20 days of cycling and after a 2-hour and 16-hour post-cycle acid challenge (carbopol-lactic acid, pH = 5.0). Separately, relative dentin and enamel abrasion (RDA and REA) were performed using the ADA recommended radiotracer method. A fluoride dose response was observed for the test dentifrices after 10 and 20 days of pH cycling, with test dentifrice C promoting the highest remineralization among the groups while both the MI Paste Plus and PreviDent systems provide the least remineralization (one-way ANOVA, SNK, P < 0.05). With respect to enamel fluoride uptake, the group facilitating the highest incorporation of fluoride into the enamel lesion was test dentifrice C, while the least effective NaF system was the MI Paste Plus (one-way ANOVA, SNK, P < 0.05). In terms of formulation abrasion, the REA scores were similar among the test dentifrices, MI Paste Plus, and PreviDent and compared favorably to the ADA reference material score (one-way ANOVA, SNK, P < 0.05); relative to the ADA reference material RDA score, the data indicate that MI Paste Plus was essentially non-abrasive, while PreviDent was significantly more abrasive to dentin (one-way ANOVA, SNK, P < 0.05). Altogether, these data show the developmental test dentifrices demonstrate a fluoride dose response and show great promise in remineralizing white-spot enamel lesions relative to MI Paste Plus and PreviDent.

An investigation of thermal changes of various permanent dental cements.

PubMed

Duymus, Zeynep Yesil; Yilmaz, Baykal; Karaalioglu, F Osman

2009-05-01

The aim of this study was to investigate and compare the temperature rises which occurred during the setting reactions of different permanent cements used to lute fixed partial prosthodontics. In this study, four cements were used. They were mixed in three different proportions: according to manufacturers' recommendations, at doubled powder ratio, and at doubled liquid ratio. With a thermocouple, the temperature rises which occurred during the setting reactions were measured. For each proportion, the measurement was repeated five times such that a total of 60 measurements were done for the four different cements. Data were analyzed using analysis of variance (ANOVA). ANOVA results showed that cement type and the interaction between cement type and the powder-liquid ratio were statistically significant factors (p<0.001). Similarly, the powder-liquid ratio was a statistically significant (p<0.01) factor. Among the dental cements tested, zinc phosphate cement showed the highest temperature rise during setting reaction, whereas glass ionomer cement showed the lowest.

Effect of electrical spot welding on load deflection rate of orthodontic wires.

PubMed

Alavi, Shiva; Abrishami, Arezoo

2015-01-01

One of the methods used for joining metals together is welding, which can be carried out using different techniques such as electric spot welding. This study evaluated the effect of electric spot welding on the load deflection rate of stainless steel and chromium-cobalt orthodontic wires. In this experimental-laboratory study, load deflection rate of 0.016 × 0.022 inch stainless steel and chromium cobalt wires were evaluated in five groups (n =18): group one: Stainless steel wires, group two: chromium-cobalt wires, group three: stainless steel wires welded to stainless steel wires, group four: Stainless steel wires welded to chromium-cobalt wires, group five: chromium-cobalt wire welded to chromium-cobalt wires. Afterward, the forces induced by the samples in 0.5 mm, 1 mm, 1.5 mm deflection were measured using a universal testing machine. Then mean force measured for each group was compared with other groups. The data were analyzed using repeated measure analysis of variance (ANOVA), one-way ANOVA, and paired t-test by the SPSS software. The significance level was set as 0.05. The Tukey test showed that there were significant differences between the load deflection rates of welded groups compared to control ones (P < 0.001). Considering the limitation of this study, the electric spot welding process performed on stainless steel and chromium-cobalt wires increased their load deflection rates.

Statistical inference methods for sparse biological time series data.

PubMed

Ndukum, Juliet; Fonseca, Luís L; Santos, Helena; Voit, Eberhard O; Datta, Susmita

2011-04-25

Comparing metabolic profiles under different biological perturbations has become a powerful approach to investigating the functioning of cells. The profiles can be taken as single snapshots of a system, but more information is gained if they are measured longitudinally over time. The results are short time series consisting of relatively sparse data that cannot be analyzed effectively with standard time series techniques, such as autocorrelation and frequency domain methods. In this work, we study longitudinal time series profiles of glucose consumption in the yeast Saccharomyces cerevisiae under different temperatures and preconditioning regimens, which we obtained with methods of in vivo nuclear magnetic resonance (NMR) spectroscopy. For the statistical analysis we first fit several nonlinear mixed effect regression models to the longitudinal profiles and then used an ANOVA likelihood ratio method in order to test for significant differences between the profiles. The proposed methods are capable of distinguishing metabolic time trends resulting from different treatments and associate significance levels to these differences. Among several nonlinear mixed-effects regression models tested, a three-parameter logistic function represents the data with highest accuracy. ANOVA and likelihood ratio tests suggest that there are significant differences between the glucose consumption rate profiles for cells that had been--or had not been--preconditioned by heat during growth. Furthermore, pair-wise t-tests reveal significant differences in the longitudinal profiles for glucose consumption rates between optimal conditions and heat stress, optimal and recovery conditions, and heat stress and recovery conditions (p-values <0.0001). We have developed a nonlinear mixed effects model that is appropriate for the analysis of sparse metabolic and physiological time profiles. The model permits sound statistical inference procedures, based on ANOVA likelihood ratio tests, for testing the significance of differences between short time course data under different biological perturbations.

Effects of metacognitive instruction on the academic achievement of students in the secondary sciences

NASA Astrophysics Data System (ADS)

Bianchi, Gregory A.

The purpose of this study was to investigate the effects of reflective assessment in the form of situated metacognitive prompts on student achievement in the secondary sciences. A second goal was to determine whether specific gender differences existed in terms of student responsiveness to the metacognitive interventions. Participants in the study consisted of a convenience sample from a population of ninth-grade honors biology students in a large suburban school district located near Seattle, Washington. Beyond answering the specific research questions raised in this study, an additional aim was to broaden the growing body of research pertaining to the effect of metacognition on student achievement. A quasi-experimental, non-equivalent control group design was employed in this study. Descriptive and inferential statistics were computed to address the specific research questions raised. Specifically, a three-way repeated-measures ANOVA was performed. For this purpose, a single within-subjects factor, termed Testing, was defined. Three levels were allocated to this factor, and quantitative data from the Pretest, Posttest, and Retention Test were assigned to the levels, respectively. Group and Gender were defined as between-subjects factors, and both were allocated two levels; the two Group levels were Reflective and Non-Reflective. The effects of Group and Gender on each of the three quantitative measures were examined singly and in interaction with each other. Tests of statistical significance were analyzed at the .05 level. There was a statistically significant effect for Group (Reflective, Non-Reflective) by Testing (Pretest, Posttest, Retention Test). A three-way repeated-measures ANOVA procedure revealed that students in the Reflective group outperformed students in the Non-Reflective group (F = 10.258, p = .002, Partial eta 2 = .088). According to the effect size estimate, almost 9% of variance in the Testing variable was attributable to the Group variable. There was not a significant interaction effect for Gender. A three-way repeated-measures ANOVA procedure revealed that Testing X Group X Gender did not yield a statistically significant F ratio (F = 1.471, p = .228, Partial eta2 = .014). Students in the Reflective group outperformed students in the Non-Reflective group, regardless of gender. The findings of this study offer modest evidence that reflective assessment in the form of situated metacognitive prompts may improve student academic outcomes at the secondary level. This study failed to provide a significant finding regarding gender-related variation in a metacognitive learning cycle.

Comparing the Performance of Approaches for Testing the Homogeneity of Variance Assumption in One-Factor ANOVA Models

ERIC Educational Resources Information Center

Wang, Yan; Rodríguez de Gil, Patricia; Chen, Yi-Hsin; Kromrey, Jeffrey D.; Kim, Eun Sook; Pham, Thanh; Nguyen, Diep; Romano, Jeanine L.

2017-01-01

Various tests to check the homogeneity of variance assumption have been proposed in the literature, yet there is no consensus as to their robustness when the assumption of normality does not hold. This simulation study evaluated the performance of 14 tests for the homogeneity of variance assumption in one-way ANOVA models in terms of Type I error…

The influence of teachers' conceptions on their students' learning: children's understanding of sheet music.

PubMed

López-Íñiguez, Guadalupe; Pozo, Juan Ignacio

2014-06-01

Despite increasing interest in teachers' and students' conceptions of learning and teaching, and how they influence their practice, there are few studies testing the influence of teachers' conceptions on their students' learning. This study tests how teaching conception (TC; with a distinction between direct and constructive) influences students' representations regarding sheet music. Sixty students (8-12 years old) from music conservatories: 30 of them took lessons with teachers with a constructive TC and another 30 with teachers shown to have a direct TC. Children were given a musical comprehension task in which they were asked to select and rank the contents they needed to learn. These contents had different levels of processing and complexity: symbolic, analytical, and referential. Three factorial ANOVAs, two-one-way ANOVAs, and four 2 × 3 repeated-measures ANOVAs were used to analyse the effects of and the interaction between the independent variables TC and class, both for/on total cards selected, their ranking, and each sub-category (the three processing levels). ANOVAs on the selection and ranking of these contents showed that teachers' conceptions seem to mediate significantly in the way the students understand the music. Students from constructive teachers have more complex and deep understanding of music. They select more elements for learning scores than those from traditional teachers. Teaching conception also influences the way in which children rank those elements. No difference exists between the way 8- and 12-year-olds learn scores. Children's understanding of the scores is more complex than assumed in other studies. © 2013 The British Psychological Society.

Assessment of Adolescent Perceptions on Parental Attitudes on Different Variables

ERIC Educational Resources Information Center

Ersoy, Evren

2015-01-01

The purpose of this study is to examine secondary school student perceptions of parental attitudes with regards to specific variables. Independent samples t test for parametric distributions and one-way variance analysis (ANOVA) was used for analyzing the data, when the ANOVA analyses were significant Scheffe test was conducted on homogeneous…

Comparative study between EDXRF and ASTM E572 methods using two-way ANOVA

NASA Astrophysics Data System (ADS)

Krummenauer, A.; Veit, H. M.; Zoppas-Ferreira, J.

2018-03-01

Comparison with reference method is one of the necessary requirements for the validation of non-standard methods. This comparison was made using the experiment planning technique with two-way ANOVA. In ANOVA, the results obtained using the EDXRF method, to be validated, were compared with the results obtained using the ASTM E572-13 standard test method. Fisher's tests (F-test) were used to comparative study between of the elements: molybdenum, niobium, copper, nickel, manganese, chromium and vanadium. All F-tests of the elements indicate that the null hypothesis (Ho) has not been rejected. As a result, there is no significant difference between the methods compared. Therefore, according to this study, it is concluded that the EDXRF method was approved in this method comparison requirement.

The influence of speed abilities and technical skills in early adolescence on adult success in soccer: A long-term prospective analysis using ANOVA and SEM approaches

PubMed Central

2017-01-01

Several talent development programs in youth soccer have implemented motor diagnostics measuring performance factors. However, the predictive value of such tests for adult success is a controversial topic in talent research. This prospective cohort study evaluated the long-term predictive value of 1) motor tests and 2) players’ speed abilities (SA) and technical skills (TS) in early adolescence. The sample consisted of 14,178 U12 players from the German talent development program. Five tests (sprint, agility, dribbling, ball control, shooting) were conducted and players’ height, weight as well as relative age were assessed at nationwide diagnostics between 2004 and 2006. In the 2014/15 season, the players were then categorized as professional (n = 89), semi-professional (n = 913), or non-professional players (n = 13,176), indicating their adult performance level (APL). The motor tests’ prognostic relevance was determined using ANOVAs. Players’ future success was predicted by a logistic regression threshold model. This structural equation model comprised a measurement model with the motor tests and two correlated latent factors, SA and TS, with simultaneous consideration for the manifest covariates height, weight and relative age. Each motor predictor and anthropometric characteristic discriminated significantly between the APL (p < .001; η2 ≤ .02). The threshold model significantly predicted the APL (R2 = 24.8%), and in early adolescence the factor TS (p < .001) seems to have a stronger effect on adult performance than SA (p < .05). Both approaches (ANOVA, SEM) verified the diagnostics’ predictive validity over a long-term period (≈ 9 years). However, because of the limited effect sizes, the motor tests’ prognostic relevance remains ambiguous. A challenge for future research lies in the integration of different (e.g., person-oriented or multilevel) multivariate approaches that expand beyond the “traditional” topic of single tests’ predictive validity and toward more theoretically founded issues. PMID:28806410

Technical note: Application of the Box-Cox data transformation to animal science experiments.

PubMed

Peltier, M R; Wilcox, C J; Sharp, D C

1998-03-01

In the use of ANOVA for hypothesis testing in animal science experiments, the assumption of homogeneity of errors often is violated because of scale effects and the nature of the measurements. We demonstrate a method for transforming data so that the assumptions of ANOVA are met (or violated to a lesser degree) and apply it in analysis of data from a physiology experiment. Our study examined whether melatonin implantation would affect progesterone secretion in cycling pony mares. Overall treatment variances were greater in the melatonin-treated group, and several common transformation procedures failed. Application of the Box-Cox transformation algorithm reduced the heterogeneity of error and permitted the assumption of equal variance to be met.

INNOVATIVE INSTRUMENTATION AND ANALYSIS OF THE TEMPERATURE MEASUREMENT FOR HIGH TEMPERATURE GASIFICATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seong W. Lee

2004-10-01

The systematic tests of the gasifier simulator on the clean thermocouple were completed in this reporting period. Within the systematic tests on the clean thermocouple, five (5) factors were considered as the experimental parameters including air flow rate, water flow rate, fine dust particle amount, ammonia addition and high/low frequency device (electric motor). The fractional factorial design method was used in the experiment design with sixteen (16) data sets of readings. Analysis of Variances (ANOVA) was applied to the results from systematic tests. The ANOVA results show that the un-balanced motor vibration frequency did not have the significant impact onmore » the temperature changes in the gasifier simulator. For the fine dust particles testing, the amount of fine dust particles has significant impact to the temperature measurements in the gasifier simulator. The effects of the air and water on the temperature measurements show the same results as reported in the previous report. The ammonia concentration was included as an experimental parameter for the reducing environment in this reporting period. The ammonia concentration does not seem to be a significant factor on the temperature changes. The linear regression analysis was applied to the temperature reading with five (5) factors. The accuracy of the linear regression is relatively low, which is less than 10% accuracy. Nonlinear regression was also conducted to the temperature reading with the same factors. Since the experiments were designed in two (2) levels, the nonlinear regression is not very effective with the dataset (16 readings). An extra central point test was conducted. With the data of the center point testing, the accuracy of the nonlinear regression is much better than the linear regression.« less

Experimental Psychological Stress on Quantitative Sensory Testing Response in Patients with Temporomandibular Disorders.

PubMed

Araújo Oliveira Ferreira, Dyna Mara; Costa, Yuri Martins; de Quevedo, Henrique Müller; Bonjardim, Leonardo Rigoldi; Rodrigues Conti, Paulo César

2018-05-15

To assess the modulatory effects of experimental psychological stress on the somatosensory evaluation of myofascial temporomandibular disorder (TMD) patients. A total of 20 women with myofascial TMD and 20 age-matched healthy women were assessed by means of a standardized battery of quantitative sensory testing. Cold detection threshold (CDT), warm detection threshold (WDT), cold pain threshold (CPT), heat pain threshold (HPT), mechanical pain threshold (MPT), wind-up ratio (WUR), and pressure pain threshold (PPT) were performed on the facial skin overlying the masseter muscle. The variables were measured in three sessions: before (baseline) and immediately after the Paced Auditory Serial Addition Task (PASAT) (stress) and then after a washout period of 20 to 30 minutes (poststress). Mixed analysis of variance (ANOVA) was applied to the data, and the significance level was set at P = .050. A significant main effect of the experimental session on all thermal tests was found (ANOVA: F > 4.10, P < .017), where detection tests presented an increase in thresholds in the poststress session compared to baseline (CDT, P = .012; WDT, P = .040) and pain thresholds were reduced in the stress (CPT, P < .001; HPT, P = .001) and poststress sessions (CPT, P = .005; HPT, P = .006) compared to baseline. In addition, a significant main effect of the study group on all mechanical tests (MPT, WUR, and PPT) was found (ANOVA: F > 4.65, P < .037), where TMD patients were more sensitive than healthy volunteers. Acute mental stress conditioning can modulate thermal sensitivity of the skin overlying the masseter in myofascial TMD patients and healthy volunteers. Therefore, psychological stress should be considered in order to perform an unbiased somatosensory assessment of TMD patients.

Psychometrics of a brief measure of emotional self-efficacy among adolescents from the United States.

PubMed

Valois, Robert F; Zullig, Keith J

2013-10-01

Preliminary data were collected to evaluate the psychometric properties of an emotional self-efficacy (ESE) measure in a sample of 3836 public high school adolescents who completed the Centers for Disease Control and Prevention (CDC) Youth Risk Behavior Survey in South Carolina. Principal axis factor analysis was followed by a 4-way between-groups analysis of variance (ANOVA) testing for differences in total score means on selected demographic estimates and their interactions. Relationships between total score and selected risk behaviors were examined through a series of 1-way ANOVA procedures and subsequent Tukey Honest Significant Difference (HSD) tests. Factor analysis results suggested that a 1-factor model best explained factor structure of the scale items (factor loadings .64 to .71, eigenvalue = 3.24, h(2)  = .46). Girls reported a significantly higher mean total ESE rating than boys; White students reported a significantly higher mean total ESE rating than Black students. Statistically significant lower mean total ESE ratings were also noted for those who reported physical fighting, lifetime alcohol use, and sexual intercourse. This 7-item scale is a reliable measure and could aid school health researchers and mental health practitioners in psychosocial screening and as an outcome of social and emotional learning as a brief measure of adolescent ESE. © 2013, American School Health Association.

Increasing the Efficiency on Producing Radiology Reports for Breast Cancer Diagnosis by Means of Structured Reports. A Comparative Study.

PubMed

Segrelles, J Damian; Medina, Rosana; Blanquer, Ignacio; Martí-Bonmatí, Luis

2017-05-18

Radiology reports are commonly written on free-text using voice recognition devices. Structured reports (SR) have a high potential but they are usually considered more difficult to fill-in so their adoption in clinical practice leads to a lower efficiency. However, some studies have demonstrated that in some cases, producing SRs may require shorter time than plain-text ones. This work focuses on the definition and demonstration of a methodology to evaluate the productivity of software tools for producing radiology reports. A set of SRs for breast cancer diagnosis based on BI-RADS have been developed using this method. An analysis of their efficiency with respect to free-text reports has been performed. The methodology proposed compares the Elapsed Time (ET) on a set of radiological reports. Free-text reports are produced with the speech recognition devices used in the clinical practice. Structured reports are generated using a web application generated with TRENCADIS framework. A team of six radiologists with three different levels of experience in the breast cancer diagnosis was recruited. These radiologists performed the evaluation, each one introducing 50 reports for mammography, 50 for ultrasound scan and 50 for MRI using both approaches. Also, the Relative Efficiency (REF) was computed for each report, dividing the ET of both methods. We applied the T-Student (T-S) test to compare the ETs and the ANOVA test to compare the REFs. Both tests were computed using the SPSS software. The study produced three DICOM-SR templates for Breast Cancer Diagnosis on mammography, ultrasound and MRI, using RADLEX terms based on BIRADs 5th edition. The T-S test on radiologists with high or intermediate profile, showed that the difference between the ET was only statistically significant for mammography and ultrasound. The ANOVA test performed grouping the REF by modalities, indicated that there were no significant differences between mammograms and ultrasound scans, but both have significant statistical differences with MRI. The ANOVA test of the REF for each modality, indicated that there were only significant differences in Mammography (ANOVA p = 0.024) and Ultrasound (ANOVA p = 0.008). The ANOVA test for each radiologist profile, indicated that there were significant differences on the high profile (ANOVA p = 0.028) and medium (ANOVA p = 0.045). In this work, we have defined and demonstrated a methodology to evaluate the productivity of software tools for producing radiology reports in Breast Cancer. We have evaluated that adopting Structured Reporting in mammography and ultrasound studies in breast cancer diagnosis improves the performance in producing reports.

Improved Test Planning and Analysis Through the Use of Advanced Statistical Methods

NASA Technical Reports Server (NTRS)

Green, Lawrence L.; Maxwell, Katherine A.; Glass, David E.; Vaughn, Wallace L.; Barger, Weston; Cook, Mylan

2016-01-01

The goal of this work is, through computational simulations, to provide statistically-based evidence to convince the testing community that a distributed testing approach is superior to a clustered testing approach for most situations. For clustered testing, numerous, repeated test points are acquired at a limited number of test conditions. For distributed testing, only one or a few test points are requested at many different conditions. The statistical techniques of Analysis of Variance (ANOVA), Design of Experiments (DOE) and Response Surface Methods (RSM) are applied to enable distributed test planning, data analysis and test augmentation. The D-Optimal class of DOE is used to plan an optimally efficient single- and multi-factor test. The resulting simulated test data are analyzed via ANOVA and a parametric model is constructed using RSM. Finally, ANOVA can be used to plan a second round of testing to augment the existing data set with new data points. The use of these techniques is demonstrated through several illustrative examples. To date, many thousands of comparisons have been performed and the results strongly support the conclusion that the distributed testing approach outperforms the clustered testing approach.

Effect of Autoclave Cycles on Surface Characteristics of S-File Evaluated by Scanning Electron Microscopy.

PubMed

Razavian, Hamid; Iranmanesh, Pedram; Mojtahedi, Hamid; Nazeri, Rahman

2016-01-01

Presence of surface defects in endodontic instruments can lead to unwanted complications such as instrument fracture and incomplete preparation of the canal. The current study was conducted to evaluate the effect of autoclave cycles on surface characteristics of S-File by scanning electron microscopy (SEM). In this experimental study, 17 brand new S-Files (#30) were used. The surface characteristics of the files were examined in four steps (without autoclave, 1 autoclave cycle, 5 autoclave cycles and 10 autoclave cycles) by SEM under 200× and 1000× magnifications. Data were analyzed using the SPSS software and the paired sample t-test, independent sample t-test and multifactorial repeated measures ANOVA. The level of significance was set at 0.05. New files had debris and pitting on their surfaces. When the autoclave cycles were increased, the mean of surface roughness also increased at both magnifications (P<0.05). Moreover, under 1000× magnification the multifactorial repeated measures ANOVA showed more surface roughness (P<0.001). Sterilization by autoclave increased the surface roughness of the files and this had was directly related to the number of autoclave cycles.

Effect of Autoclave Cycles on Surface Characteristics of S-File Evaluated by Scanning Electron Microscopy

PubMed Central

Razavian, Hamid; Iranmanesh, Pedram; Mojtahedi, Hamid; Nazeri, Rahman

2016-01-01

Introduction: Presence of surface defects in endodontic instruments can lead to unwanted complications such as instrument fracture and incomplete preparation of the canal. The current study was conducted to evaluate the effect of autoclave cycles on surface characteristics of S-File by scanning electron microscopy (SEM). Methods and Materials: In this experimental study, 17 brand new S-Files (#30) were used. The surface characteristics of the files were examined in four steps (without autoclave, 1 autoclave cycle, 5 autoclave cycles and 10 autoclave cycles) by SEM under 200× and 1000× magnifications. Data were analyzed using the SPSS software and the paired sample t-test, independent sample t-test and multifactorial repeated measures ANOVA. The level of significance was set at 0.05. Results: New files had debris and pitting on their surfaces. When the autoclave cycles were increased, the mean of surface roughness also increased at both magnifications (P<0.05). Moreover, under 1000× magnification the multifactorial repeated measures ANOVA showed more surface roughness (P<0.001). Conclusion: Sterilization by autoclave increased the surface roughness of the files and this had was directly related to the number of autoclave cycles. PMID:26843874

Adaptation and Assessment of Reliability and Validity of the Greek Version of the Ohkuma Questionnaire for Dysphagia Screening

PubMed Central

Papadopoulou, Soultana L.; Exarchakos, Georgios; Christodoulou, Dimitrios; Theodorou, Stavroula; Beris, Alexandre; Ploumis, Avraam

2016-01-01

Introduction The Ohkuma questionnaire is a validated screening tool originally used to detect dysphagia among patients hospitalized in Japanese nursing facilities. Objective The purpose of this study is to evaluate the reliability and validity of the adapted Greek version of the Ohkuma questionnaire. Methods Following the steps for cross-cultural adaptation, we delivered the validated Ohkuma questionnaire to 70 patients (53 men, 17 women) who were either suffering from dysphagia or not. All of them completed the questionnaire a second time within a month. For all of them, we performed a bedside and VFSS study of dysphagia and asked participants to undergo a second VFSS screening, with the exception of nine individuals. Statistical analysis included measurement of internal consistency with Cronbach's α coefficient, reliability with Cohen's Kappa, Pearson's correlation coefficient and construct validity with categorical components, and One-Way Anova test. Results According to Cronbach's α coefficient (0.976) for total score, there was high internal consistency for the Ohkuma Dysphagia questionnaire. Test-retest reliability (Cohen's Kappa) ranged from 0.586 to 1.00, exhibiting acceptable stability. We also estimated the Pearson's correlation coefficient for the test-retest total score, which reached high levels (0.952; p = 0.000). The One-Way Anova test in the two measurement times showed statistically significant correlation in both measurements (p = 0.02 and p = 0.016). Conclusion The adapted Greek version of the questionnaire is valid and reliable and can be used for the screening of dysphagia in the Greek-speaking patients. PMID:28050209

Adaptation and Assessment of Reliability and Validity of the Greek Version of the Ohkuma Questionnaire for Dysphagia Screening.

PubMed

Papadopoulou, Soultana L; Exarchakos, Georgios; Christodoulou, Dimitrios; Theodorou, Stavroula; Beris, Alexandre; Ploumis, Avraam

2017-01-01

Introduction  The Ohkuma questionnaire is a validated screening tool originally used to detect dysphagia among patients hospitalized in Japanese nursing facilities. Objective  The purpose of this study is to evaluate the reliability and validity of the adapted Greek version of the Ohkuma questionnaire. Methods  Following the steps for cross-cultural adaptation, we delivered the validated Ohkuma questionnaire to 70 patients (53 men, 17 women) who were either suffering from dysphagia or not. All of them completed the questionnaire a second time within a month. For all of them, we performed a bedside and VFSS study of dysphagia and asked participants to undergo a second VFSS screening, with the exception of nine individuals. Statistical analysis included measurement of internal consistency with Cronbach's α coefficient, reliability with Cohen's Kappa, Pearson's correlation coefficient and construct validity with categorical components, and One-Way Anova test. Results  According to Cronbach's α coefficient (0.976) for total score, there was high internal consistency for the Ohkuma Dysphagia questionnaire. Test-retest reliability (Cohen's Kappa) ranged from 0.586 to 1.00, exhibiting acceptable stability. We also estimated the Pearson's correlation coefficient for the test-retest total score, which reached high levels (0.952; p  = 0.000). The One-Way Anova test in the two measurement times showed statistically significant correlation in both measurements ( p  = 0.02 and p  = 0.016). Conclusion  The adapted Greek version of the questionnaire is valid and reliable and can be used for the screening of dysphagia in the Greek-speaking patients.

Comparison effect of azithromycin gel 2% with clindamycin gel 1% in patients with acne.

PubMed

Mokhtari, Fatemeh; Faghihi, Gita; Basiri, Akram; Farhadi, Sadaf; Nilforoushzadeh, Mohammadali; Behfar, Shadi

2016-01-01

Acne vulgaris is the most common skin disease. Local and systemic antimicrobial drugs are used for its treatment. But increasing resistance of Propionibacterium acnes to antibiotics has been reported. In a double-blind clinical trial, 40 patients with mild to moderate acne vulgaris were recruited. one side of the face was treated with Clindamycin Gel 1% and the other side with Azithromycin Topical Gel 2% BID for 8 weeks and then they were assessed. Average age was 21. 8 ± 7 years. 82.5% of them were female. Average number of papules, pustules and comedones was similarly reduced in both groups and, no significant difference was observed between the two groups (P > 0.05, repeated measurs ANOVA). The mean indexes of ASI and TLC also significantly decreased during treatment in both groups, no significant difference was observed between the two groups. (P > 0.05, repeated measurs ANOVA). Also, impact of both drugs on papules and pustules was 2-3 times greater than the effect on comedones. Average satisfaction score was not significant between the two groups (P = 0.6, repeated measurs ANOVA). finally, frequency distribution of complications was not significant between the two groups (P > 0.05, Fisher Exact test). Azithromycin gel has medical impact at least similar to Clindamycin Gel in treatment of mild to moderate acne vulgaris, and it may be consider as suitable drug for resistant acne to conventional topical therapy.

LED Curing Lights and Temperature Changes in Different Tooth Sites

PubMed Central

Armellin, E.; Bovesecchi, G.; Coppa, P.; Pasquantonio, G.; Cerroni, L.

2016-01-01

Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ 2. After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure. PMID:27195282

LED Curing Lights and Temperature Changes in Different Tooth Sites.

PubMed

Armellin, E; Bovesecchi, G; Coppa, P; Pasquantonio, G; Cerroni, L

2016-01-01

Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ (2). After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure.

Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran.

PubMed

Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

2016-05-25

This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs.

The effect of brushing with toothpaste containing nano calcium carbonate upon nanofill composite resin surface roughness

NASA Astrophysics Data System (ADS)

Ramadhani, A. M.; Herda, E.; Triaminingsih, S.

2017-08-01

This study aims to determine the effect of brushing with toothpaste containing nanocalcium carbonate on the roughness of nanofill composite resin surface. Brushing was conducted with 3 types of materials for 3 consecutive brushing periods of 10 minutes each. Surface roughness was measured using a surface-roughness tester and the results were analyzed using the repeated ANOVA and the one-way ANOVA test. The surface morphology was observed using SEM after 3 months’ worth of brushing with the 3 materials. It was found that the nanofill composite resin surface-roughness value increased significantly (p<0.005) after brushing with toothpaste containing nano calcium carbonate for 3 months, but the value was not as high as that obtained when brushing with other types of toothpaste.

An Investigation of Dental Luting Cement Solubility as a Function of the Marginal Gap.

DTIC Science & Technology

1988-05-01

way ANOVA for the Phase 1 Diffusion Study revealed that there were statistically significant differences between the test groups. A Duncan’s Multiple...cement. The 25, 50, and 75 micron groups demonstrated no statistically significant differences in the amount of remaining luting cement. ( p< 0.05) A...one-way ANOVA was also performed on Phase 2 Dynamic Study. This test revealed that there were statistically significant differences among the test

Validity and reliability of the Short Physical Performance Battery (SPPB)

PubMed Central

Curcio, Carmen-Lucía; Alvarado, Beatriz; Zunzunegui, María Victoria; Guralnik, Jack

2013-01-01

Objectives: To assess the validity (convergent and construct) and reliability of the Short Physical Performance Battery (SPPB) among non-disabled adults between 65 to 74 years of age residing in the Andes Mountains of Colombia. Methods: Design Validation study; Participants: 150 subjects aged 65 to 74 years recruited from elderly associations (day-centers) in Manizales, Colombia. Measurements: The SPPB tests of balance, including time to walk 4 meters and time required to stand from a chair 5 times were administered to all participants. Reliability was analyzed with a 7-day interval between assessments and use of repeated ANOVA testing. Construct validity was assessed using factor analysis and by testing the relationship between SPPB and depressive symptoms, cognitive function, and self rated health (SRH), while the concurrent validity was measured through relationships with mobility limitations and disability in Activities of Daily Living (ADL). ANOVA tests were used to establish these associations. Results: Test-retest reliability of the SPPB was high: 0.87 (CI95%: 0.77-0.96). A one factor solution was found with three SPPB tests. SPPB was related to self-rated health, limitations in walking and climbing steps and to indicators of disability, as well as to cognitive function and depression. There was a graded decrease in the mean SPPB score with increasing disability and poor health. Conclusion: The Spanish version of SPPB is reliable and valid to assess physical performance among older adults from our region. Future studies should establish their clinical applications and explore usage in population studies. PMID:24892614

Quality-by-design (QbD): effects of testing parameters and formulation variables on the segregation tendency of pharmaceutical powder measured by the ASTM D 6940-04 segregation tester.

PubMed

Xie, Lin; Wu, Huiquan; Shen, Meiyu; Augsburger, Larry L; Lyon, Robbe C; Khan, Mansoor A; Hussain, Ajaz S; Hoag, Stephen W

2008-10-01

The objective of this study was to examine the effects of testing parameters and formulation variables on the segregation tendency of pharmaceutical powders measured by the ASTM D 6940-04 segregation tester using design of experiments (DOE) approaches. The test blends consisted of 4% aspirin (ASP) and 96% microcrystalline cellulose (MCC) with and without magnesium stearate (MgS). The segregation tendency of a blend was determined by measuring the last/first (L/F) ratio, the ratio of aspirin concentrations between the first and last samples discharged from the tester. A 2(2) factorial design was used to determine the effects of measurement parameters [amount of material loaded (W), number of segregation cycles] with number of replicates 6. ANOVA showed that W was a critical parameter for segregation testing. The L/F value deviated further from 1 (greater segregation tendency) with increasing W. A 2(3) full factorial design was used to assess the effects of formulation variables: grade of ASP (unmilled, milled), grade of MCC, and amount of lubricant, MgS. MLR and ANOVA showed that the grade of ASP was the main effect contributing to segregation tendency. Principal Component Regression Analysis established a correlation between L/F and the physical properties of the blend related to ASP and MCC, the ASP/MCC particle size ratio (PSR) and powder cohesion. The physical properties of the blend related to density and flow were not influenced by the grade of ASP and were not related to the segregation tendency of the blend. The direct relationship between L/F and PSR was determined by univariate analysis. Segregation tendency increased as the ASP to MCC particle size increased. This study highlighted critical test parameters for segregation testing and identified critical physical properties of the blends that influence segregation tendency. (c) 2008 Wiley-Liss, Inc. and the American Pharmacists Association

Augmented effects of EMG biofeedback interfaced with virtual reality on neuromuscular control and movement coordination during reaching in children with cerebral palsy.

PubMed

Yoo, Ji Won; Lee, Dong Ryul; Cha, Young Joo; You, Sung Hyun

2017-01-01

The purpose of the present study was to compare therapeutic effects of an electromyography (EMG) biofeedback augmented by virtual reality (VR) and EMG biofeedback alone on the triceps and biceps (T:B) muscle activity imbalance and elbow joint movement coordination during a reaching motor taskOBJECTIVE: To compare therapeutic effects of an electromyography (EMG) biofeedback augmented by virtual reality (VR) and EMG biofeedback alone on the triceps and biceps muscle activity imbalance and elbow joint movement coordination during a reaching motor task in normal children and children with spastic cerebral palsy (CP). 18 children with spastic CP (2 females; mean±standard deviation = 9.5 ± 1.96 years) and 8 normal children (3 females; mean ± standard deviation = 9.75 ± 2.55 years) were recruited from a local community center. All children with CP first underwent one intensive session of EMG feedback (30 minutes), followed by one session of the EMG-VR feedback (30 minutes) after a 1-week washout period. Clinical tests included elbow extension range of motion (ROM), biceps muscle strength, and box and block test. EMG triceps and biceps (T:B) muscle activity imbalance and reaching movement acceleration coordination were concurrently determined by EMG and 3-axis accelerometer measurements respectively. Independent t-test and one-way repeated analysis of variance (ANOVA) were performed at p < 0.05. The one-way repeated ANOVA was revealed to be significantly effective in elbow extension ROM (p = 0.01), biceps muscle strength (p = 0.01), and box and block test (p = 0.03). The one-way repeated ANOVA also revealed to be significantly effective in the peak triceps muscle activity (p = 0.01). However, one-way repeated ANOVA produced no statistical significance in the composite 3-dimensional movement acceleration coordination data (p = 0.12). The present study is a first clinical trial that demonstrated the superior benefits of the EMG biofeedback when augmented by virtual reality exercise games in children with spastic CP. The augmented EMG and VR feedback produced better neuromuscular balance control in the elbow joint than the EMG biofeedback alone.

Association Between Selenium and Malondialdehyde as an Efficient Biomarker of Oxidative Stress in Infantile Cardiac Surgery.

PubMed

de Oliveira Ulbrecht, Marlice Oliveira; Gonçalves, Daniel Araujo; Zanoni, Lourdes Zélia Garcia; do Nascimento, Valter Aragão

2018-05-12

The present work describes a method to quantify the level of oxidative stress in infantile cardiac surgery. Fifteen patients, 6 girls and 9 boys, aged between 3 months and 16 years were divided into three groups. The first group sought to quantify the oxidative stress from differing concentrations of selenium. The second group used malondialdehyde as an indicator of oxidative stress. Finally, the third group quantified oxidative stress by normalizing the selenium concentration via malondialdehyde. Blood aliquots of 1.50 ml, drawn from the radial artery, were collected and centrifuged for quantification of Se and MDA in plasma. The statistical method ANOVA was used with a 95% confidence interval to indicate significant statistical differences between the post- and pre-operative stage for each group. The concentrations of malondialdehyde were measured by using UV-Vis following the thiobarbituric acid reaction method. For quantification of selenium, the samples were submitted to assisted microwave digestion and measured by ICP OES. In the first two groups, it was not possible to affirm that selenium and malondialdehyde could be biomarkers of oxidative stress, so a statistic test (ANOVA) was performed. However, the selenium/malondialdehyde ratios in the pre-operative and post-operative stage were 2.10 ± 0.70 and 3.20 ± 0.40, respectively. The ANOVA test confirmed a statistically significant difference between the pre- and post-operative stages with p value = 0.004. Here, the ratio of selenium concentration by malondialdehyde was confirmed to be an effective parameter for demonstration and quantification of oxidative stress activity at the post-operative stage.

Comparison of central corneal thickness measurements using ultrasound pachymetry, ultrasound biomicroscopy, and the Artemis-2 VHF scanner in normal eyes

PubMed Central

Al-Farhan, Haya M; Al-Otaibi, Wafa’a Majed

2012-01-01

Purpose To compare the precision of central corneal thickness (CCT) measurements taken with the handheld ultrasound pachymeter (USP), ultrasound biomicroscopy (UBM), and the Artemis-2 very high frequency ultrasound scanner (VHFUS) on normal subjects. Design Prospective study. Methods One eye from each of 61 normal subjects was randomly selected for this study. The measurements of the CCT were taken with the USP, VHFUS, and UBM. Results were compared statistically using repeated-measures analysis of variance (ANOVA), Pearson’s correlation coefficient, and limits of agreement. Results The average CCT (± standard deviation) was 530.1 ± 30.5 μm, 554.9 ± 31.7 μm, and 559.5 ± 30.7 μm for UBM, VHFUS, and USP respectively. The intraobserver repeatability analyses of variance are not significant for USP, UBM, and VHFUS. P-values were 0.17, 0.19, and 0.37 respectively. Repeated-measures ANOVA showed a significant difference between the three different methods of measuring CCT (P = 0.0001). The ANOVA test revealed no statistically significant difference between USP and VHFUS (P > 0.05), yet statistical significant differences with UBM versus USP and UBM versus VHFUS (P < 0.001). There were high correlations between the three instruments (P < 0.0001). The mean differences (and upper/lower limits of agreement) for CCT measurements were 29.4 ± 14.3 (2.7/56), 4.6 ± 8.6 (−14.7/23.8), and −24.8 ± 13.1 (−50.4/0.8) for USP versus UBM, USP versus VHFUS, and UBM versus VHFUS, respectively. Conclusion The UBM produces CCT measurements that vary significantly from those returned by the USP and the VHFUS, suggesting that the UBM may not be used interchangeably with either equipment for monitoring the CCT in the clinical setting. PMID:22848145

Measuring performance improvement: total organizational commitment or clinical specialization.

PubMed

Caron, Aleece; Jones, Paul; Neuhauser, Duncan; Aron, David C

2004-01-01

Resources for hospitals are limited when they are faced with multiple publicly reported performance measures as tools to assess quality. The leadership in these organizations may choose to focus on 1 or 2 of these outcomes. An alternative approach is that the leadership may commit resources or create conditions that result in improved quality over a broad range of measures. We used aggregated data on mortality, length of stay, and obstetrical outcomes from Greater Cleveland Health Quality Choice data to test these theories. We used Pearson correlation analysis to determine of outcomes were correlated with one another. We used repeated-measures ANOVA to determine if an association existed between outcome and time and outcome and hospital. All of the outcomes across all hospitals demonstrate a trend of overall improvement. Both the Pearson and ANOVA result support the hypothesis for the organization-wide approach to quality improvement. Hospital that make improvements in one clinical area trend to make improvements in others. Hospitals that produce improvements in limited clinical or administrative areas may not have completely adopted CQI into their culture or may not have yet realized the benefits of their organizational commitments, but use some of the concepts to improve quality outcomes.

An In-vitro Comparison of Force Loss of Orthodontic Non-Latex Elastics

PubMed Central

Alavi, Shiva; Tabatabaie, Atusa Rahnama; Hajizadeh, Fatemeh; Ardekani, Alireza Haerian

2014-01-01

Objective: The amount and consistency of the applied forces to the tooth are important factors in tooth movements; therefore, the aim of this study was to compare the initial force and the force loss of three brands of elastics in 24 hours. Materials and Methods: In this in-vitro study sixty non-latex elastics (3/16 medium) from three companies (Forestadent, Dentaurum and Ortho Technology) were randomly selected. Two static tests were performed, the first in a dry environment to evaluate the initial force and the other performed in a wet environment (artificial saliva) to evaluate the force loss in 24 hours. The Universal testing machine measured the forces after stretching the elastics to three times the lumen diameter. Data were analyzed by repeated measures ANOVA, One-way ANOVA, Tukey-HSD, Paired samples test, and one sample test. Results: The difference between the brands was significant (p=0.002). Force loss was observed in all samples; 4–7.5% force loss occurred after one hour and 19–38% force loss occurred after 24 hours. The average initial force of Forestadent and Ortho Technology was significantly higher than marketed forces (p<0.001), but the initial force of Dentaurum elastics was similar to the marketed force. Conclusion: The force loss over 24 hours time period was Forestadent>Dentaurum>Ortho-Technology. According to the initial force and force loss percentage it is suggested to replace the non-latex elastics several times a day. PMID:24910671

Mechanical properties and radiopacity of experimental glass-silica-metal hybrid composites.

PubMed

Jandt, Klaus D; Al-Jasser, Abdullah M O; Al-Ateeq, Khalid; Vowles, Richard W; Allen, Geoff C

2002-09-01

Experimental glass-silica-metal hybrid composites (polycomposites) were developed and tested mechanically and radiographically in this fundamental pilot study. To determine whether mechanical properties of a glass-silica filled two-paste dental composite based on a Bis-GMA/polyglycol dimethacrylate blend could be improved through the incorporation of titanium (Ti) particles (particle size ranging from 1 to 3 microm) or silver-tin-copper (Ag-Sn-Cu) particles (particle size ranging from 1 to 50 microm) we measured the diametral tensile strength, fracture toughness and radiopacity of five composites. The five materials were: I, the original unmodified composite (control group); II, as group I but containing 5% (wt/wt) of Ti particles; III, as group II but with Ti particles treated with 4-methacryloyloxyethyl trimellitate anhydride (4-META) to promote Ti-resin bonding; IV, as group I but containing 5% (wt/wt) of Ag-Sn-Cu particles; and V, as group IV but with the metal particles treated with 4-META. Ten specimens of each group were tested in a standard diametral tensile strength test and a fracture toughness test using a single-edge notched sample design and five specimens of each group were tested using a radiopacity test. The diametral tensile strength increased statistically significantly after incorporation of Ti treated with 4-META, as tested by ANOVA (P=0.004) and Fisher's LSD test. A statistically significant increase of fracture toughness was observed between the control group and groups II, III and V as tested by ANOVA (P=0.003) and Fisher's LSD test. All other groups showed no statistically significant increase in diametral tensile strength and fracture toughness respectively when compared to their control groups. No statistically significant increase in radiopacity was found between the control group and the Ti filled composite, whereas a statistically significant increase in radiopacity was found between the control group and the Ag-Sn-Cu filled composite as tested by ANOVA (P=0.000) and Fisher's LSD procedure. The introduction of titanium and silver-tin-copper fillers has potential as added components in composites to provide increased mechanical strength and radiopacity, for example for use in core materials.

WASP (Write a Scientific Paper) using Excel 9: Analysis of variance.

PubMed

Grech, Victor

2018-06-01

Analysis of variance (ANOVA) may be required by researchers as an inferential statistical test when more than two means require comparison. This paper explains how to perform ANOVA in Microsoft Excel. Copyright © 2018 Elsevier B.V. All rights reserved.

Self esteem and organizational commitment among health information management staff in tertiary care hospitals in Tehran.

PubMed

Sadoughi, Farahnaz; Ebrahimi, Kamal

2014-12-12

Self esteem (SE) and organizational commitment (OC)? have significant impact on the quality of work life. This study aims to gain a better understanding of the relationships between SE and OC among health information management staff in tertiary care hospitals in Tehran (Iran). This was a descriptive correlational and cross sectional study conducted on the health information management staff of tertiary care hospitals in Tehran, Iran. A total of 155 participants were randomly selected from 400 staff. Data were collected by two standard questionnaires. The SE and OC was measured using Eysenck SE scale and Meyer and Allen's three component model, respectively. The collected data were analyzed with the SPSS (version 16) using statistical tests of of independent T-test, Pearson Correlation coefficient, one way ANOVA and F tests. The OC and SE of the employees' were 67.8?, out of 120 (weak) and 21.0 out of 30 (moderate), respectively. The values for affective commitment, normative commitment, and continuance commitment were respectively 21.3 out of 40 (moderate), 23.9 out of 40 (moderate), and 22.7 out of 40 (moderate). The Pearson correlation coefficient test showed a significant OC and SE was statistically significant (P<0.05). The one way ANOVA test (P<0.05) did not show any significant difference between educational degree and work experience with SE and OC. This research showed that SE and OC ?are moderate. SE and OC have strong correlation with turnover, critical thinking, job satisfaction, and individual and organizational improvement. Therefore, applying appropriate human resource policies is crucial to reinforce these measures.

Surface hardness evaluation of different composite resin materials: influence of sports and energy drinks immersion after a short-term period

PubMed Central

ERDEMİR, Ugur; YİLDİZ, Esra; EREN, Meltem Mert; OZEL, Sevda

2013-01-01

Objectives: This study evaluated the effect of sports and energy drinks on the surface hardness of different composite resin restorative materials over a 1-month period. Material and Methods: A total of 168 specimens: Compoglass F, Filtek Z250, Filtek Supreme, and Premise were prepared using a customized cylindrical metal mould and they were divided into six groups (N=42; n=7 per group). For the control groups, the specimens were stored in distilled water for 24 hours at 37º C and the water was renewed daily. For the experimental groups, the specimens were immersed in 5 mL of one of the following test solutions: Powerade, Gatorade, X-IR, Burn, and Red Bull, for two minutes daily for up to a 1-month test period and all the solutions were refreshed daily. Surface hardness was measured using a Vickers hardness measuring instrument at baseline, after 1-week and 1-month. Data were statistically analyzed using Multivariate repeated measure ANOVA and Bonferroni's multiple comparison tests (α=0.05). Results: Multivariate repeated measures ANOVA revealed that there were statistically significant differences in the hardness of the restorative materials in different immersion times (p<0.001) in different solutions (p<0.001). The effect of different solutions on the surface hardness values of the restorative materials was tested using Bonferroni's multiple comparison tests, and it was observed that specimens stored in distilled water demonstrated statistically significant lower mean surface hardness reductions when compared to the specimens immersed in sports and energy drinks after a 1-month evaluation period (p<0.001). The compomer was the most affected by an acidic environment, whereas the composite resin materials were the least affected materials. Conclusions: The effect of sports and energy drinks on the surface hardness of a restorative material depends on the duration of exposure time, and the composition of the material. PMID:23739850

Gene set differential analysis of time course expression profiles via sparse estimation in functional logistic model with application to time-dependent biomarker detection.

PubMed

Kayano, Mitsunori; Matsui, Hidetoshi; Yamaguchi, Rui; Imoto, Seiya; Miyano, Satoru

2016-04-01

High-throughput time course expression profiles have been available in the last decade due to developments in measurement techniques and devices. Functional data analysis, which treats smoothed curves instead of originally observed discrete data, is effective for the time course expression profiles in terms of dimension reduction, robustness, and applicability to data measured at small and irregularly spaced time points. However, the statistical method of differential analysis for time course expression profiles has not been well established. We propose a functional logistic model based on elastic net regularization (F-Logistic) in order to identify the genes with dynamic alterations in case/control study. We employ a mixed model as a smoothing method to obtain functional data; then F-Logistic is applied to time course profiles measured at small and irregularly spaced time points. We evaluate the performance of F-Logistic in comparison with another functional data approach, i.e. functional ANOVA test (F-ANOVA), by applying the methods to real and synthetic time course data sets. The real data sets consist of the time course gene expression profiles for long-term effects of recombinant interferon β on disease progression in multiple sclerosis. F-Logistic distinguishes dynamic alterations, which cannot be found by competitive approaches such as F-ANOVA, in case/control study based on time course expression profiles. F-Logistic is effective for time-dependent biomarker detection, diagnosis, and therapy. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Finite Element Model Calibration Approach for Ares I-X

NASA Technical Reports Server (NTRS)

Horta, Lucas G.; Reaves, Mercedes C.; Buehrle, Ralph D.; Templeton, Justin D.; Lazor, Daniel R.; Gaspar, James L.; Parks, Russel A.; Bartolotta, Paul A.

2010-01-01

Ares I-X is a pathfinder vehicle concept under development by NASA to demonstrate a new class of launch vehicles. Although this vehicle is essentially a shell of what the Ares I vehicle will be, efforts are underway to model and calibrate the analytical models before its maiden flight. Work reported in this document will summarize the model calibration approach used including uncertainty quantification of vehicle responses and the use of nonconventional boundary conditions during component testing. Since finite element modeling is the primary modeling tool, the calibration process uses these models, often developed by different groups, to assess model deficiencies and to update parameters to reconcile test with predictions. Data for two major component tests and the flight vehicle are presented along with the calibration results. For calibration, sensitivity analysis is conducted using Analysis of Variance (ANOVA). To reduce the computational burden associated with ANOVA calculations, response surface models are used in lieu of computationally intensive finite element solutions. From the sensitivity studies, parameter importance is assessed as a function of frequency. In addition, the work presents an approach to evaluate the probability that a parameter set exists to reconcile test with analysis. Comparisons of pre-test predictions of frequency response uncertainty bounds with measured data, results from the variance-based sensitivity analysis, and results from component test models with calibrated boundary stiffness models are all presented.

Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran

PubMed Central

Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

2016-01-01

Objectives: This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. Method: A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. Results: The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Conclusion: Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs. PMID:27010083

A study on electrode gels for skin conductance measurements.

PubMed

Tronstad, Christian; Johnsen, Gorm Krogh; Grimnes, Sverre; Martinsen, Ørjan G

2010-10-01

Low-frequency skin conductance is used within several clinical applications and is mainly sensitive to sweating and the moisture content of the stratum corneum, but also how electrodes introduce changes in the electrical properties. Four electrode gels were investigated with regard to sorption characteristics and electrical properties. Skin conductance time series were collected from 18 test subjects during relaxation, exercise and recovery, wearing different pairs of electrodes contralaterally on the hypothenar and the T9 dermatome. Pressure test was applied on the T9 electrodes. Impedance frequency sweeps were taken on the T9 electrodes the same day and the next, parameterized to the Cole model. ANOVA on the initial skin conductance level change, exercise response amplitude, recovery offset and pressure-induced changes revealed significant differences among gel types. The wetter gels caused a higher positive level change, a greater response amplitude, larger recovery offset and greater pressure-induced artifacts compared to the solid gels. Sweating on the T9 site led to negative skin conductance responses for the wetter gels. Correlations were found between the desorption measurements and the initial skin conductance level change (hypothenar: R = 0.988 T9: R = 0.901) RM-ANOVA on the Cole parameters revealed a significant decrease in R(s) of the most resistive gel. Clinical implications are discussed.

A LISREL Model for the Analysis of Repeated Measures with a Patterned Covariance Matrix.

ERIC Educational Resources Information Center

Rovine, Michael J.; Molenaar, Peter C. M.

1998-01-01

Presents a LISREL model for the estimation of the repeated measures analysis of variance (ANOVA) with a patterned covariance matrix. The model is demonstrated for a 5 x 2 (Time x Group) ANOVA in which the data are assumed to be serially correlated. Similarities with the Statistical Analysis System PROC MIXED model are discussed. (SLD)

SMAR Sessions

NASA Technical Reports Server (NTRS)

Ploutz-Snyder, Robert

2011-01-01

This slide presentation is a series of educational presentations that are on the statistical function of analysis of variance (ANOVA). Analysis of Variance (ANOVA) examines variability between groups, relative to within groups, to determine whether there's evidence that the groups are not from the same population. One other presentation reviews hypothesis testing.

Effect of the SPARK Program on Physical Activity, Cardiorespiratory Endurance, and Motivation in Middle-School Students.

PubMed

Fu, You; Gao, Zan; Hannon, James C; Burns, Ryan D; Brusseau, Timothy A

2016-05-01

This study aimed to examine the effect of a 9-week SPARK program on physical activity (PA), cardiorespiratory endurance (Progressive Aerobic Cardiovascular Endurance Run; PACER), and motivation in middle-school students. 174 students attended baseline and posttests and change scores computed for each outcome. A MANOVA was employed to examine change score differences using follow-up ANOVA and Bonferroni post hoc tests. MANOVA yielded a significant interaction for Grade × Gender × Group (Wilks's Λ = 0.89, P < .001). ANOVA for PA revealed significant differences between SPARK grades 6 and 7 (Mean Δ = 8.11, P < .01) and Traditional grades 6 and 8 (Mean Δ = -6.96, P < .01). ANOVA also revealed greater PACER change for Traditional boys in grade 8 (P < .01) and SPARK girls in grade 8 (P < .01). There were significant interactions with perceived competence differences between SPARK grades 6 and 8 (Mean Δ = 0.38, P < .05), Enjoyment differences between SPARK grades 6 and 7 (Mean Δ = 0.67, P < .001), and SPARK grades 6 and 8 (Mean Δ = 0.81, P < .001). Following the intervention, SPARK displayed greater increases on PA and motivation measures in younger students compared with the Traditional program.

Extending the reach of an evidence-based theatrical intervention.

PubMed

Noice, Helga; Noice, Tony

2013-01-01

BACKGROUND/STUDY CONTEXT: In Experiment 1, the authors investigated whether they could train retirement home activity directors with no previous experience in theatre to successfully execute an evidence-based 4-week theatre-arts intervention. In Experiment 2, they investigated whether an outside professional acting teacher who received only minimal training via e-mail and telephone could successfully execute the same intervention heretofore only carried out by the actor/director/professor who devised it. A total of 115 participants (ages 68-94) in four different retirement homes were taught theatre arts either by their in-house activity director who had no formal training in theatre or a professional acting teacher recruited through a local community college. The intervention consisted of twice-weekly 70-min lessons for 4 weeks. After random assignment to experimental or waiting-list control groups, participants were given pre- and posttests on both functional and cognitive measures. Experiment 1 showed that activity directors were able to run this intervention and achieve significant results on the 28-item functional measure (Observed Tasks of Daily Living, Revised [OTDL-R]) as measured by a mixed-design analysis of variance (ANOVA) and paired-sample t tests (p < .001), and on one cognitive measure, Means-End Problem-Solving (MEPS), as measured by a multivariate ANOVA (MANCOVA) and follow-up univariate ANOVAs. Experiment 2 (outside acting teacher) used the identical measures and revealed significant results on the OTDL-R (p = .002), word recall, MEPS, and verbal fluency (η²(p) ranging from .28 to .59). This study addressed the feasibility of training multiple instructors of varying experience to administer this theatre-arts intervention. Previous iterations had all been administered by the professional actor/director/theatre professor who devised the program. These current results demonstrate that widespread administration of this short-term (4-week) evidence-based intervention is feasible.

Comparing ambient, air-convection, and fluid-convection heating techniques in treating hypothermic burn patients, a clinical RCT

PubMed Central

2011-01-01

Background Hypothermia in burns is common and increases morbidity and mortality. Several methods are available to reach and maintain normal core body temperature, but have not yet been evaluated in critical care for burned patients. Our unit's ordinary technique for controlling body temperature (Bair Hugger®+ radiator ceiling + bed warmer + Hotline®) has many drawbacks e.g.; slow and the working environment is hampered. The aim of this study was to compare our ordinary heating technique with newly-developed methods: the Allon™2001 Thermowrap (a temperature regulating water-mattress), and Warmcloud (a temperature regulating air-mattress). Methods Ten consecutive burned patients (> 20% total burned surface area and a core temperature < 36.0°C) were included in this prospective, randomised, comparative study. Patients were randomly exposed to 3 heating methods. Each treatment/measuring-cycle lasted for 6 hours. Each heating method was assessed for 2 hours according to a randomised timetable. Core temperature was measured using an indwelling (bladder) thermistor. Paired t-tests were used to assess the significance of differences between the treatments within the patients. ANOVA was used to assess the differences in temperature from the first to the last measurement among all treatments. Three-way ANOVA with the Tukey HSD post hoc test and a repeated measures ANOVA was used in the same manner, but included information about patients and treatment/measuring-cycles to control for potential confounding. Data are presented as mean (SD) and (range). Probabilities of less than 0.05 were accepted as significant. Results The mean increase, 1.4 (SD 0.6°C; range 0.6-2.6°C) in core temperature/treatment/measuring-cycle highly significantly favoured the Allon™2001 Thermowrap in contrast to the conventional method 0.2 (0.6)°C (range -1.2 to 1.5°C) and the Warmcloud 0.3 (0.4)°C (range -0.4 to 0.9°C). The procedures for using the Allon™2001 Thermowrap were experienced to be more comfortable and straightforward than the conventional method or the Warmcloud. Conclusions The Allon™2001 Thermowrap was more effective than the Warmcloud or the conventional method in controlling patients' temperatures. PMID:21736717

Calculating and reporting effect sizes to facilitate cumulative science: a practical primer for t-tests and ANOVAs

PubMed Central

Lakens, Daniël

2013-01-01

Effect sizes are the most important outcome of empirical studies. Most articles on effect sizes highlight their importance to communicate the practical significance of results. For scientists themselves, effect sizes are most useful because they facilitate cumulative science. Effect sizes can be used to determine the sample size for follow-up studies, or examining effects across studies. This article aims to provide a practical primer on how to calculate and report effect sizes for t-tests and ANOVA's such that effect sizes can be used in a-priori power analyses and meta-analyses. Whereas many articles about effect sizes focus on between-subjects designs and address within-subjects designs only briefly, I provide a detailed overview of the similarities and differences between within- and between-subjects designs. I suggest that some research questions in experimental psychology examine inherently intra-individual effects, which makes effect sizes that incorporate the correlation between measures the best summary of the results. Finally, a supplementary spreadsheet is provided to make it as easy as possible for researchers to incorporate effect size calculations into their workflow. PMID:24324449

Iron Activation of Cellular Oxidases: Modulation of NeuronalViability (In Vitro).

DTIC Science & Technology

2018-04-06

Findings related to each specific aim of the study or project, answering each research or study questions, and/or hypothesis: The experimentation ...significant (NS) differences between groups when normalized to GAPDH. All groups were compared using one-way ANOVA with Tukey’s post -hoc test . Western...pɘ.0001. All groups were compared using one-way ANOVA with Tukey’s post -hoc test . All graphs represent n=6. Bars represent mean +/- SEM. It is

Effect of core strength and endurance training on performance in college students: randomized pilot study.

PubMed

Schilling, Jim F; Murphy, Jeff C; Bonney, John R; Thich, Jacob L

2013-07-01

Core training continues to be emphasized with the proposed intent of improving athletic performance. The purpose of this investigation was to discover if core isometric endurance exercises were superior to core isotonic strengthening exercises and if either influenced specific endurance, strength, and performance measures. Ten untrained students were randomly assigned to core isometric endurance (n = 5) and core isotonic strength training (n = 5). Each performed three exercises, two times per week for six weeks. A repeated measures ANOVA was used to compare the measurements for the dependent variables and significance by bonferroni post-hoc testing. The training protocols were compared using a 2 × 3 mixed model ANOVA. Improvement in trunk flexor and extensor endurance (p < 0.05) along with squat and bench press strength (p < 0.05) occurred with the strength group. Improvement in trunk flexor and right lateral endurance (p < 0.05) along with strength in the squat (p < 0.05) were found with the endurance group. Neither training protocol claimed superiority and both were ineffective in improving performance. Published by Elsevier Ltd.

Comparison of the Effect of Toothbrushing Education Via Video, Lecture and Pamphlet on the Dental Plaque Index of 12-Year-Old Children.

PubMed

Ramezaninia, Javad; Naghibi Sistani, Mohammad Mehdi; Ahangari, Zohreh; Gholinia, Hemmat; Jahanian, Iman; Gharekhani, Samaneh

2018-04-11

The aim of this study was to compare the effect of different modes of toothbrushing education (lecture, video and pamphlet) on the dental plaque index (PI) of adolescents. The cluster randomized intervention was performed on 128 participants aged 12 years, who were allocated into four groups based on the type of intervention. Group 1: no intervention; and groups 2, 3, 4: education via lecture, video, and pamphlet, respectively (n = 32). Their plaque index was measured at the baseline, 24 h and two months later. Data were analyzed by repeated measures analysis of variance (ANOVA), one-way ANOVA, independent and paired t-test. The plaque indices of groups 2, 3, 4 at 24 h (p values < 0.001) and two months (p values < 0.001) showed a significant reduction when compared to the baseline. The lowest PI score was observed in the pamphlet, video and lecture groups at 24 h, respectively. After 2 months, the lowest score of PI was measured in lecture, video and pamphlet groups, respectively; however, these differences were non-significant. Therefore, toothbrushing education via lecture, video and pamphlet reduced the dental plaque index with the same effectiveness.

Extending the Reach of an Evidence Based Theatrical Intervention

PubMed Central

Noice, Helga; Noice, Tony

2013-01-01

Background/Study Context In Experiment 1, the authors investigated whether they could train retirement home activity directors with no previous experience in theatre to successfully execute an evidence-based four week theatre-arts intervention. In Experiment 2, they investigated whether an outside professional acting teacher who received only minimal training via email and telephone could successfully execute the same intervention heretofore only carried out by the actor/director/professor who devised it. Methods A total of 115 participants (ages 68–94) in four different retirement homes were taught theatre-arts either by their in-house activity director who had no formal training in theatre or a professional acting teacher recruited through a local community college. The intervention consisted of twice-weekly 70-minute lessons for four weeks. After random assignment to experimental or waiting-list control groups, participants were given pre- and post-tests on both functional and cognitive measures. Results Experiment 1 showed that activity directors were able to run this intervention and achieve significant results on the 28-item functional measure (OTDL-R) as measured by a mixed design ANOVA and paired sample t-tests (p<.001), and on one cognitive measure, Means—End Problem Solving (MEPS), as measured by a MANCOVA and follow-up univariate ANOVAs. Experiment 2 (outside acting teacher) used the identical measures and revealed significant results on the OTDL-R (p = .002), Word Recall, MEPS, and Verbal Fluency (ηp2 ranging from .28 to .59). Conclusions This study addressed the feasibility of training multiple instructors of varying experience to administer this theatre arts intervention. Previous iterations had all been administered by the professional actor/director/theatre-professor who devised the program. These current results demonstrate that widespread administration of this short-term (four-week) evidence-based intervention is feasible. PMID:23875838

Evaluation of the Repeatability and Accuracy of the Wideband Real-Ear-to-Coupler Difference.

PubMed

Vaisberg, Jonathan M; Folkeard, Paula; Pumford, John; Narten, Philipp; Scollie, Susan

2018-06-01

The real-ear-to-coupler difference (RECD) is an ANSI standardized method for estimating ear canal sound pressure level (SPL) thresholds and assisting in the prediction of real-ear aided responses. It measures the difference in dB between the SPL produced in the ear canal and the SPL produced in an HA-1 2-cc coupler by the same sound source. Recent evidence demonstrates that extended high-frequency bandwidth, beyond the hearing aid bandwidth typically measured, is capable of providing additional clinical benefit. The industry has, in turn, moved toward developing hearing aids and verification equipment capable of producing and measuring extended high-frequency audible output. As a result, a revised RECD procedure conducted using a smaller, 0.4-cc coupler, known as the wideband-RECD (wRECD), has been introduced to facilitate extended high-frequency coupler-based measurements up to 12.5 kHz. This study aimed to (1) compare test-retest repeatability between the RECD and wRECD and (2) measure absolute agreement between the RECD and wRECD when both are referenced to a common coupler. RECDs and wRECDs were measured bilaterally in adult ears by calculating the dB difference in SPL between the ear canal and coupler responses. Real-ear probe microphone measures were completed twice per ear per participant for both foam-tip and customized earmold couplings using the Audioscan Verifit 1 and Verifit 2 fitting systems, followed by measurements in the respective couplers. Twenty-one adults (mean age = 67 yr, range = 19-78) with typical aural anatomy (as determined by measures of impedance and otoscopy) participated in this study, leading to a sample size of 42 ears. Repeatability within RECD and wRECD was assessed for each coupling configuration using a repeated-measures analysis of variance (ANOVA) with test-retest and frequency as within-participants factors. Repeatability between the RECD and wRECD was assessed within each configuration using a repeated-measures ANOVA with test-retest, frequency, and coupler type as within-participants factors. Agreement between the RECD and wRECD was assessed for each coupling configuration using a repeated-measures ANOVA with RECD value, coupler type, and frequency as within-participants factors. Post hoc comparisons with Bonferroni corrections were used when appropriate to locate the frequencies at which differences occurred. A 3-dB criterion was defined to locate differences of clinical significance. Average absolute test-retest differences were within ±3 dB within each coupler and coupling configuration, and between the RECD and wRECD. The RECD and wRECD were in absolute agreement following HA-1-referenced transforms, with most frequencies agreeing within ±1 dB, except at 0.2 kHz for the earmold, and 0.2-0.25 kHz for the foam tip, where the average RECD exceeded the average wRECD by slightly >3 dB. Test-retest repeatability of the RECD (up to 8 kHz) and wRECD (up to 12.5 kHz) is acceptable and similar to previously reported data. The RECD and wRECD are referenced to different couplers, but can be rendered comparable with a simple transform, producing values that are in accordance with the ANSI S3.46-2013 standard. American Academy of Audiology.

Tolerance of image enhancement brightness and contrast in lateral cephalometric digital radiography for Steiner analysis

NASA Astrophysics Data System (ADS)

Rianti, R. A.; Priaminiarti, M.; Syahraini, S. I.

2017-08-01

Image enhancement brightness and contrast can be adjusted on lateral cephalometric digital radiographs to improve image quality and anatomic landmarks for measurement by Steiner analysis. To determine the limit value for adjustments of image enhancement brightness and contrast in lateral cephalometric digital radiography for Steiner analysis. Image enhancement brightness and contrast were adjusted on 100 lateral cephalometric radiography in 10-point increments (-30, -20, -10, 0, +10, +20, +30). Steiner analysis measurements were then performed by two observers. Reliabilities were tested by the Interclass Correlation Coefficient (ICC) and significance tested by ANOVA or the Kruskal Wallis test. No significant differences were detected in lateral cephalometric analysis measurements following adjustment of the image enhancement brightness and contrast. The limit value of adjustments of the image enhancement brightness and contrast associated with incremental 10-point changes (-30, -20, -10, 0, +10, +20, +30) does not affect the results of Steiner analysis.

Finite Element Model Calibration Approach for Area I-X

NASA Technical Reports Server (NTRS)

Horta, Lucas G.; Reaves, Mercedes C.; Buehrle, Ralph D.; Templeton, Justin D.; Gaspar, James L.; Lazor, Daniel R.; Parks, Russell A.; Bartolotta, Paul A.

2010-01-01

Ares I-X is a pathfinder vehicle concept under development by NASA to demonstrate a new class of launch vehicles. Although this vehicle is essentially a shell of what the Ares I vehicle will be, efforts are underway to model and calibrate the analytical models before its maiden flight. Work reported in this document will summarize the model calibration approach used including uncertainty quantification of vehicle responses and the use of non-conventional boundary conditions during component testing. Since finite element modeling is the primary modeling tool, the calibration process uses these models, often developed by different groups, to assess model deficiencies and to update parameters to reconcile test with predictions. Data for two major component tests and the flight vehicle are presented along with the calibration results. For calibration, sensitivity analysis is conducted using Analysis of Variance (ANOVA). To reduce the computational burden associated with ANOVA calculations, response surface models are used in lieu of computationally intensive finite element solutions. From the sensitivity studies, parameter importance is assessed as a function of frequency. In addition, the work presents an approach to evaluate the probability that a parameter set exists to reconcile test with analysis. Comparisons of pretest predictions of frequency response uncertainty bounds with measured data, results from the variance-based sensitivity analysis, and results from component test models with calibrated boundary stiffness models are all presented.

Demineralization of resin-sealed enamel by soft drinks in a clinically relevant pH cycling model.

PubMed

Bartels, Agata A; Evans, Carla A; Viana, Grace; Bedran-Russo, Ana K

2016-04-01

To compare the in vitro protective effect of orthodontic sealants on the enamel demineralization under a soft drink-induced erosive challenge. The facial surfaces of bovine incisors were sectioned into 5 mm x 4 mm x 4 mm enamel blocks. Specimens were randomly assigned to three surface protection measures: control (exposed enamel), coating with Transbond XT (unfilled resin primer), or coating with Opal Seal (filled and fluoride releasing primer). Thermocycling was used to simulate aging. The specimens were pH cycled through an acidic buffer, test beverage and a neutral buffer for a total of 7 days. Test beverages included water, Diet Mountain Dew, and Coke Classic. Quantitative light-induced fluorescence (QLF) images were taken at baseline and after aging. Final QLF images were taken to evaluate the demineralization of enamel. Data were analyzed statistically using a two-way ANOVA to compare the interaction between enamel surface protection and beverages as well as one-way ANOVA to compare surface protection and the test beverage levels. A statistically significant interaction was found between the surface protected groups and the test beverage groups (P < 0.05). Statistically significant differences were found among the test beverage groups (P < 0.05) and among the surface protection groups (P < 0.05). Coke Classic went through the sealant layer resulting in high enamel demineralization. Enamel coating with Opal Seal significantly reduced the erosive attack of beverages.

Geophysical data integration, stochastic simulation and significance analysis of groundwater responses using ANOVA in the Chicot Aquifer system, Louisiana, USA

USGS Publications Warehouse

Rahman, A.; Tsai, F.T.-C.; White, C.D.; Carlson, D.A.; Willson, C.S.

2008-01-01

Data integration is challenging where there are different levels of support between primary and secondary data that need to be correlated in various ways. A geostatistical method is described, which integrates the hydraulic conductivity (K) measurements and electrical resistivity data to better estimate the K distribution in the Upper Chicot Aquifer of southwestern Louisiana, USA. The K measurements were obtained from pumping tests and represent the primary (hard) data. Borehole electrical resistivity data from electrical logs were regarded as the secondary (soft) data, and were used to infer K values through Archie's law and the Kozeny-Carman equation. A pseudo cross-semivariogram was developed to cope with the resistivity data non-collocation. Uncertainties in the auto-semivariograms and pseudo cross-semivariogram were quantified. The groundwater flow model responses by the regionalized and coregionalized models of K were compared using analysis of variance (ANOVA). The results indicate that non-collocated secondary data may improve estimates of K and affect groundwater flow responses of practical interest, including specific capacity and drawdown. ?? Springer-Verlag 2007.

The role of service-learning in college students' environmental literacy: Content knowledge, attitudes, and behaviors

NASA Astrophysics Data System (ADS)

Singletary, Joanna Lynn Bush

This study evaluated the relationship of environmental service-learning on environmental literacy in undergraduates. The subjects were 36 undergraduates at a small liberal arts university enrolled in an environmental biology course. To determine the role of environmental service-learning on college students' environmental knowledge, attitudes, behaviors, and environmental literacy, this study utilized concurrent mixed methods approach for qualitative and quantitative analysis. A quasi-experimental repeated measures approach was the design of the quantitative component of the study. Data were collected on attitude, behavior, and content knowledge aspects of environmental literacy as measured by the Environmental Literacy Survey (Kibert, 2000). Hypotheses were tested by independent samples ttests and repeated measures ANOVA. Repeated measures ANOVA conducted on participants' three subscales scores for the Environmental Literacy Survey (attitude, behavior, and knowledge) indicated that students who participated in environmental service-learning scored statistically significantly higher than those that did not initially participate in service-learning. Qualitative data collected in the form of journal reflections and portfolios were evaluated for themes of environmental attitudes or affective statements, environmentally positive behaviors and skills, and ecological content. Quantitative and qualitative data support the positive role of environmental service-learning in the development of environmental literacy in undergraduate students.

Self Esteem and Organizational Commitment Among Health Information Management Staff in Tertiary Care Hospitals in Tehran

PubMed Central

Sadoughi, Farahnaz; Ebrahimi, Kamal

2015-01-01

Background: Self esteem (SE) and organizational commitment (OC) have significant impact on the quality of work life. Aim: This study aims to gain a better understanding of the relationships between SE and OC among health information management staff in tertiary care hospitals in Tehran (Iran). Methods: This was a descriptive correlational and cross sectional study conducted on the health information management staff of tertiary care hospitals in Tehran, Iran. A total of 155 participants were randomly selected from 400 staff. Data were collected by two standard questionnaires. The SE and OC was measured using Eysenck SE scale and Meyer and Allen’s three component model, respectively. The collected data were analyzed with the SPSS (version 16) using statistical tests of of independent T-test, Pearson Correlation coefficient, one way ANOVA and F tests. Results: The OC and SE of the employees’ were 67.8, out of 120 (weak and 21.0 out of 30 (moderate), respectively. The values for affective commitment, normative commitment, and continuance commitment were respectively 21.3 out of 40 (moderate), 23.9 out of 40 (moderate), and 22.7 out of 40 (moderate). The Pearson correlation coefficient test showed a significant OC and SE was statistically significant (P<0.05). The one way ANOVA test (P<0.05) did not show any significant difference between educational degree and work experience with SE and OC. Conclusion: This research showed that SE and OC are moderate. SE and OC have strong correlation with turnover, critical thinking, job satisfaction, and individual and organizational improvement. Therefore, applying appropriate human resource policies is crucial to reinforce these measures. PMID:25716374

The Applicability of Standard Error of Measurement and Minimal Detectable Change to Motor Learning Research-A Behavioral Study.

PubMed

Furlan, Leonardo; Sterr, Annette

2018-01-01

Motor learning studies face the challenge of differentiating between real changes in performance and random measurement error. While the traditional p -value-based analyses of difference (e.g., t -tests, ANOVAs) provide information on the statistical significance of a reported change in performance scores, they do not inform as to the likely cause or origin of that change, that is, the contribution of both real modifications in performance and random measurement error to the reported change. One way of differentiating between real change and random measurement error is through the utilization of the statistics of standard error of measurement (SEM) and minimal detectable change (MDC). SEM is estimated from the standard deviation of a sample of scores at baseline and a test-retest reliability index of the measurement instrument or test employed. MDC, in turn, is estimated from SEM and a degree of confidence, usually 95%. The MDC value might be regarded as the minimum amount of change that needs to be observed for it to be considered a real change, or a change to which the contribution of real modifications in performance is likely to be greater than that of random measurement error. A computer-based motor task was designed to illustrate the applicability of SEM and MDC to motor learning research. Two studies were conducted with healthy participants. Study 1 assessed the test-retest reliability of the task and Study 2 consisted in a typical motor learning study, where participants practiced the task for five consecutive days. In Study 2, the data were analyzed with a traditional p -value-based analysis of difference (ANOVA) and also with SEM and MDC. The findings showed good test-retest reliability for the task and that the p -value-based analysis alone identified statistically significant improvements in performance over time even when the observed changes could in fact have been smaller than the MDC and thereby caused mostly by random measurement error, as opposed to by learning. We suggest therefore that motor learning studies could complement their p -value-based analyses of difference with statistics such as SEM and MDC in order to inform as to the likely cause or origin of any reported changes in performance.

[Effects of radiation emitted from mobile phones on short- term heart rate variability parameters].

PubMed

Yıldız, Metin; Yılmaz, Derya; Güler, Inan; Akgüllü, Cağdaş

2012-08-01

In this study, the effects of radiation emitted from mobile phone (MP) on heart rate variability (HRV) which is accepted a non-invasive indicator of autonomic nervous system (ANS) were investigated with considering the deficiency of previous studies. A randomized controlled study has been designed and utilized with 30 young and healthy volunteers. During the experiment that had three periods, the electrocardiogram (ECG) and respiration signals were recorded and MP was attached to subjects' right ear with a bone. Ten subjects selected randomly were exposed to high -level radiation during the second period (Experimental Group 1). Ten of others were exposed during the third period with maximum level radiation (Experimental Group 2). Ten records were also made while MP was closed as a control. Short -term HRV parameters were obtained and repeated measures ANOVA and suitable post-hoc tests applied to the results. According to the results of the repeated measures ANOVA; there were no significant main effects of groups. However, there were some significant differences in measuring time periods and groups*period interactions. The post-hoc tests showed that mean R to R interval and HF power are significantly changed by maximum radiation emitted from MP. Due to the radiation emitted from MPs at maximum power, some changes may occur in HRV parameters that are associated with increased parasympathetic activity. But, the level of these changes is similar to daily activities as excitement, and stand up.

Reliability of temporal summation and diffuse noxious inhibitory control

PubMed Central

Cathcart, Stuart; Winefield, Anthony H; Rolan, Paul; Lushington, Kurt

2009-01-01

BACKGROUND: The test-retest reliability of temporal summation (TS) and diffuse noxious inhibitory control (DNIC) has not been reported to date. Establishing such reliability would support the possibility of future experimental studies examining factors affecting TS and DNIC. Similarly, the use of manual algometry to induce TS, or an occlusion cuff to induce DNIC of TS to mechanical stimuli, has not been reported to date. Such devices may offer a simpler method than current techniques for inducing TS and DNIC, affording assessment at more anatomical locations and in more varied research settings. METHOD: The present study assessed the test-retest reliability of TS and DNIC using the above techniques. Sex differences on these measures were also investigated. RESULTS: Repeated measures ANOVA indicated successful induction of TS and DNIC, with no significant differences across test-retest occasions. Sex effects were not significant for any measure or interaction. Intraclass correlations indicated high test-retest reliability for all measures; however, there was large interindividual variation between test and retest measurements. CONCLUSION: The present results indicate acceptable within-session test-retest reliability of TS and DNIC. The results support the possibility of future experimental studies examining factors affecting TS and DNIC. PMID:20011713

Self-reflection, gender and science achievement

NASA Astrophysics Data System (ADS)

Shoop, Kathleen A.

Drawing on socio-cognitive learning theory, this study compared achievement scores of 134 male and female high school biology students randomly assigned to groups which either used self-reflection, used self-reflection and received feedback, or did not self-reflect. Following a pretest, the teacher provided self-reflection strategy instruction to students in the two intervention groups and then subsequently provided in-class self-reflection time for these groups. The posttest concluded the unit; the retention measure was five weeks later. A quasi-experimental 3 x 3 x 2 (time x intervention x gender) factorial repeated-measures control group design was used for this study; a repeated measures ANOVA and several one-way ANOVA's were used to answer the research questions. Results from the repeated-measures ANOVA revealed significant results for Time and Time x Intervention, with the reflection group demonstrating significantly lower gains from pretest to posttest than the other two groups. The ANOVA examining differences between those who reflected and those who reflected and received feedback provided significant results with similar results for the difference between the control group and the reflection group. For teachers and students this study provides several areas of practical significance. Primarily, teachers may find lower student achievement if students regularly self-reflect but do not receive feedback for their reflection.

Effect of resin shades on opacity of ceramic veneers and polymerization efficiency through ceramics.

PubMed

Öztürk, Elif; Chiang, Yu-Chih; Coşgun, Erdal; Bolay, Şükran; Hickel, Reinhard; Ilie, Nicoleta

2013-11-01

The aim of this study was to assess the effect of different resin cement shades on the opacity and color difference of ceramics and to determine the polymerization efficiency of the resin cement at different shades after curing through ceramics. Two different ceramics (IPS e.max Press and IPS Empress(®)CAD, Ivoclar Vivadent) were used for this study. A light-cured veneer luting resin (Variolink Veneer, Ivoclar Vivadent) in four different shades of HV+1, HV+3, LV-1, and LV-3 was used for the colorimetric measurements. The color and spectral reflectance of the ceramics were measured according to the CIELab color scale relative to the standard illuminant D65 on a reflection spectrophotometer (ColorEye7000A, USA). Color differences (ΔE values) and the contrast ratios (CR) of the different groups of samples were calculated. In order to analyse the polymerization efficiency of the resin cements, the micromechanical properties of the resins were measured with an automatic microhardness indenter (Fisherscope H100C, Germany). The results were analysed using one-way ANOVA and Tukey's HSD post hoc tests (SPSS 18.0). The one-way ANOVA test showed that the values of ΔE and CR of the different specimen groups were significantly different (p<0.05). Group 1 (20.7 ± 0.5) (IPS-CAD without resin cement) exhibited the highest and group 10 (14.8 ± 0.5) (e.max:HV+3) exhibited the lowest ΔE value. Significant differences in the micromechanical properties were identified among the tested resin cements in different shades (p<0.05). Resin cement shade is an important factor for the opacity of a restoration. Furthermore, the resin shade affects the micromechanical properties of the underlying resin cement. Copyright © 2013 Elsevier Ltd. All rights reserved.

Influence of abutment material and luting cements color on the final color of all ceramics.

PubMed

Dede, Dogu Ömür; Armaganci, Arzu; Ceylan, Gözlem; Cankaya, Soner; Celik, Ersan

2013-11-01

The purpose of this study is to evaluate the effects of different abutment materials and luting cements color on the final color of implant-supported all-ceramic restorations. Ten A2 shade IPS e.max Press disc shape all-ceramic specimens were prepared (11 × 1.5 mm). Three different shades (translucent, universal and white opaque) of disc shape luting cement specimens were prepared (11 × 0.2 mm). Three different (zirconium, gold-palladium and titanium) implant abutments and one composite resin disc shape background specimen were prepared at 11 mm diameter and appropriate thicknesses. All ceramic specimens colors were measured with each background and luting cement samples on a teflon mold. A digital spectrophotometer used for measurements and data recorded as CIE L*a*b* color co-ordinates. An optical fluid applied on to the samples to provide a good optical connection and measurements on the composite resin background was saved as the control group. ΔE values were calculated from the ΔL, Δa and Δb values between control and test groups and data were analyzed with one-way variance analysis (ANOVA) and mean values were compared by the Tukey HSD test (α = 0.05). One-way ANOVA of ΔL, Δa, Δb and ΔE values of control and test groups revealed significant differences for backgrounds and seldom for cement color groups (p the 0.05). Only zirconium implant abutment groups and gold palladium abutment with universal shade cement group were found to be clinically acceptable (ΔE ≤ 3.0). Using titanium or gold-palladium abutments for implant supported all ceramics will be esthetically questionable and white opaque cement will be helpful to mask the dark color of titanium abutment.

Acute effects of The Stick on strength, power, and flexibility.

PubMed

Mikesky, Alan E; Bahamonde, Rafael E; Stanton, Katie; Alvey, Thurman; Fitton, Tom

2002-08-01

The Stick is a muscle massage device used by athletes, particularly track athletes, to improve performance. The purpose of this project was to assess the acute effects of The Stick on muscle strength, power, and flexibility. Thirty collegiate athletes consented to participate in a 4-week, double-blind study, which consisted of 4 testing sessions (1 familiarization and 3 data collection) scheduled 1 week apart. During each testing session subjects performed 4 measures in the following sequence: hamstring flexibility, vertical jump, flying-start 20-yard dash, and isokinetic knee extension at 90 degrees x s(-1). Two minutes of randomly assigned intervention treatment (visualization [control], mock insensible electrical stimulation [placebo], or massage using The Stick [experimental]) was performed immediately prior to each performance measure. Statistical analyses involved single-factor repeated measures analysis of variance (ANOVA) with Fisher's Least Significant Difference post-hoc test. None of the variables measured showed an acute improvement (p < or = 0.05) immediately following treatment with The Stick.

Finding P-Values for F Tests of Hypothesis on a Spreadsheet.

ERIC Educational Resources Information Center

Rochowicz, John A., Jr.

The calculation of the F statistic for a one-factor analysis of variance (ANOVA) and the construction of an ANOVA tables are easily implemented on a spreadsheet. This paper describes how to compute the p-value (observed significance level) for a particular F statistic on a spreadsheet. Decision making on a spreadsheet and applications to the…

Modeling neuroendocrine stress reactivity in salivary cortisol: adjusting for peak latency variability.

PubMed

Lopez-Duran, Nestor L; Mayer, Stefanie E; Abelson, James L

2014-07-01

In this report, we present growth curve modeling (GCM) with landmark registration as an alternative statistical approach for the analysis of time series cortisol data. This approach addresses an often-ignored but critical source of variability in salivary cortisol analyses: individual and group differences in the time latency of post-stress peak concentrations. It allows for the simultaneous examination of cortisol changes before and after the peak while controlling for timing differences, and thus provides additional information that can help elucidate group differences in the underlying biological processes (e.g., intensity of response, regulatory capacity). We tested whether GCM with landmark registration is more sensitive than traditional statistical approaches (e.g., repeated measures ANOVA--rANOVA) in identifying sex differences in salivary cortisol responses to a psychosocial stressor (Trier Social Stress Test--TSST) in healthy adults (mean age 23). We used plasma ACTH measures as our "standard" and show that the new approach confirms in salivary cortisol the ACTH finding that males had longer peak latencies, higher post-stress peaks but a more intense post-peak decline. This finding would have been missed if only saliva cortisol was available and only more traditional analytic methods were used. This new approach may provide neuroendocrine researchers with a highly sensitive complementary tool to examine the dynamics of the cortisol response in a way that reduces risk of false negative findings when blood samples are not feasible.

Flexibility responses to different stretching methods in young elite basketball players.

PubMed

Notarnicola, Angela; Perroni, Fabrizio; Campese, Alessio; Maccagnano, Giuseppe; Monno, Antonio; Moretti, Biagio; Tafuri, Silvio

2017-01-01

The aims of study were: 1) to verify the effectiveness of different stretching methods and training; 2) to compare the effects with only training on the flexibility of joints in basketball players. 30 males basketball players (age: 17±1yrs; BMI: 23.4±3.1), divided into 2 groups (15 experimental group - EG - and 15 control group, CG), participated to study. EG performed 5 different stretching method: passive stretching, active stretching, postural protocol, PNF and dynamic stretching. To assess differences (p<0.05) between groups, an ANOVA was applied to anthropometrics characteristic (age; height; weight and BMI) and flexibility performances (leg raise in a supine position; forward trunk bending). ANOVA for repeated measurements was conducted to asses differences in each group with time (i.e., pre-post). Results showed a variation linked to time (F=21.9; p<0.0001) and an effect of the treatment of the leg raise in a supine position test (F=25.1; p<0.0001). Also in flexion test of trunk, the average values could be linked to time of measurement (F=9.96; p<0.0001) and group (F=8.65; p<0.0001). The results suggest that a specific different stretching protocol should be used in different part of body to offer performance benefit and decreasing of the incidents of injuries. IV.

Light transmittance of zirconia as a function of thickness and microhardness of resin cements under different thicknesses of zirconia

PubMed Central

Egilmez, Ferhan; Ergun, Gulfem; Kaya, Bekir M.

2013-01-01

Objective: The objective of this study was to compare microhardness of resin cements under different thicknesses of zirconia and the light transmittance of zirconia as a function of thickness. Study design: A total of 126 disc-shaped specimens (2 mm in height and 5 mm in diameter) were prepared from dual-cured resin cements (RelyX Unicem, Panavia F and Clearfil SA cement). Photoactivation was performed by using quartz tungsten halogen and light emitting diode light curing units under different thicknesses of zirconia. Then the specimens (n=7/per group) were stored in dry conditions in total dark at 37°C for 24 h. The Vicker’s hardness test was performed on the resin cement layer with a microhardness tester. Statistical significance was determined using multifactorial analysis of variance (ANOVA) (alpha=.05). Light transmittance of different thicknesses of zirconia (0.3, 0.5 and 0.8 mm) was measured using a hand-held radiometer (Demetron, Kerr). Data were analyzed using one-way ANOVA test (alpha=.05). Results: ANOVA revealed that resin cement and light curing unit had significant effects on microhardness (p < 0.001). Additionally, greater zirconia thickness resulted in lower transmittance. There was no correlation between the amount of light transmitted and microhardness of dual-cured resin cements (r = 0.073, p = 0.295). Conclusion: Although different zirconia thicknesses might result in insufficient light transmission, dual-cured resin cements under zirconia restorations could have adequate microhardness. Key words:Zirconia, microhardness, light transmittance, resin cement. PMID:23385497

The impact of teacher preparation on student achievement in rural secondary schools

NASA Astrophysics Data System (ADS)

Barnes, Shontier Prescott

The primary purpose of this study was to examine significant differences, if any, in student achievement in the area of math and science of students taught by traditionally certified teachers and alternatively certified teachers. This study examined alternatively certified teachers, as identified from through the Georgia TAPP (Teacher Alternative Preparation Program), and traditionally certified teachers in rural high schools in the Central Savannah River Area of Georgia. Student achievement was measured by student scores on the Algebra I and Physical Science End-Of-Course Test, a criterion-referenced test aligned with state adopted curriculum standards. The study utilized frequency distributions, correlations, descriptive statistics, and univariate analysis of variance (ANOVA) to examine the data. Univariate tests were done to find individual differences for each dependent variable. The ANOVA was used for the single dependent (student achievement) and formed comparisons and tracked the effect of the independent variable (teacher preparation), each of which (traditional and alternative) may have a number of levels and may interact to affect the dependent variable. The covariates, the independent variables not manipulated, but still affecting the response, are students' ethnicity, gender, and school socioeconomic status were also analyzed to predict student achievement. KEY WORDS. Teacher Preparation, Student Achievement, Math, Science, Traditionally certified teachers, Alternatively certified teachers, Georgia TAPP (Teacher Alternative Preparation Program), End-Of-Course Test (EOCT), Performance standard.

Innovative Instrumentation and Analysis of the Temperature Measurement for High Temperature Gasification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seong W. Lee

The project entitled, ''Innovative Instrumentation and Analysis of the Temperature Measurement for High Temperature Gasification'', was successfully completed by the Principal Investigator, Dr. S. Lee and his research team in the Center for Advanced Energy Systems and Environmental Control Technologies at Morgan State University. The major results and outcomes were presented in semi-annual progress reports and annual project review meetings/presentations. Specifically, the literature survey including the gasifier temperature measurement, the ultrasonic application in cleaning application, and spray coating process and the gasifier simulator (cold model) testing has been successfully conducted during the first year. The results show that four factorsmore » (blower voltage, ultrasonic application, injection time intervals, particle weight) were considered as significant factors that affect the temperature measurement. Then the gasifier simulator (hot model) design and the fabrication as well as the systematic tests on hot model were completed to test the significant factors on temperature measurement in the second year. The advanced Industrial analytic methods such as statistics-based experimental design, analysis of variance (ANOVA) and regression methods were applied in the hot model tests. The results show that operational parameters (i.e. air flow rate, water flow rate, fine dust particle amount, ammonia addition) presented significant impact on the temperature measurement inside the gasifier simulator. The experimental design and ANOVA are very efficient way to design and analyze the experiments. The results show that the air flow rate and fine dust particle amount are statistically significant to the temperature measurement. The regression model provided the functional relation between the temperature and these factors with substantial accuracy. In the last year of the project period, the ultrasonic and subsonic cleaning methods and coating materials were tested/applied on the thermocouple cleaning according to the proposed approach. Different frequency, application time and power of the ultrasonic/subsonic output were tested. The results show that the ultrasonic approach is one of the best methods to clean the thermocouple tips during the routine operation of the gasifier. In addition, the real time data acquisition system was also designed and applied in the experiments. This advanced instrumentation provided the efficient and accurate data acquisition for this project. In summary, the accomplishment of the project provided useful information of the ultrasonic cleaning method applied in thermocouple tip cleaning. The temperature measurement could be much improved both in accuracy and duration provided that the proposed approach is widely used in the gasification facilities.« less

Roles of frequency, attitudes, and multiple intelligence modality surrounding Electricity Content-Based Reader's Theatre

NASA Astrophysics Data System (ADS)

Hosier, Julie Winchester

Integration of subjects is something elementary teachers must do to insure required objectives are covered. Science-based Reader's Theatre is one way to weave reading into science. This study examined the roles of frequency, attitudes, and Multiple Intelligence modalities surrounding Electricity Content-Based Reader's Theatre. This study used quasi-experimental, repeated measures ANOVA with time as a factor design. A convenience sample of two fifth-grade classrooms participated in the study for eighteen weeks. Five Electricity Achievement Tests were given throughout the study to assess students' growth. A Student Reader's Theatre Attitudinal Survey revealed students' attitudes before and after Electricity Content-Based Reader's Theatre treatment. The Multiple Intelligence Inventory for Kids (Faris, 2007) examined whether Multiple Intelligence modality played a role in achievement on Electricity Test 4, the post-treatment test. Analysis using repeated measures ANOVA and an independent t-test found that students in the experimental group, which practiced its student-created Electricity Content-Based Reader's Theatre skits ten times versus two times for the for control group, did significantly better on Electricity Achievement Test 4, t(76) = 3.018, p = 0.003. Dependent t-tests did not find statistically significant differences between students' attitudes about Electricity Content-Based Reader's Theatre before and after treatment. A Kruskal-Wallis test found no statistically significant difference between the various Multiple Intelligence modalities score mean ranks (x2 = 5.57, df = 2, alpha = .062). Qualitative data do, however, indicate students had strong positive feelings about Electricity Content-Based Reader's Theatre after treatment. Students indicated it to be motivating, confidence-building, and a fun way to learn about science; however, they disliked writing their own scripts. Examining the frequency, attitudes, and Multiple Intelligence modalities lead to the conclusion that the role of frequency had the greatest impact on the success of Electricity Content-Based Reader's Theatre. The participating teachers, students, and research found integrating science and reading through Electricity Content-Based Reader's Theatre beneficial.

Lower incisor inclination regarding different reference planes.

PubMed

Zataráin, Brenda; Avila, Josué; Moyaho, Angeles; Carrasco, Rosendo; Velasco, Carmen

2016-09-01

The purpose of this study was to assess the degree of lower incisor inclination with respect to different reference planes. It was an observational, analytical, longitudinal, prospective study conducted on 100 lateral cephalograms which were corrected according to the photograph in natural head position in order to draw the true vertical plane (TVP). The incisor mandibular plane angle (IMPA) was compensated to eliminate the variation of the mandibular plane growth type with the formula "FMApx.- 25 (FMA) + IMPApx. = compensated IMPA (IMPACOM)". As the data followed normal distribution determined by the KolmogorovSmirnov test, parametric tests were used for the statistical analysis, Ttest, ANOVA and Pearson coefficient correlation test. Statistical analysis was performed using a statistical significance of p <0.05. There is correlation between TVP and NB line (NB) (0.8614), Frankfort mandibular incisor angle (FMIA) (0.8894), IMPA (0.6351), Apo line (Apo) (0.609), IMPACOM (0.8895) and McHorris angle (MH) (0.7769). ANOVA showed statistically significant differences between the means for the 7 variables with 95% confidence level, P=0.0001. The multiple range test showed no significant difference among means: APoNB (0.88), IMPAMH (0.36), IMPANB (0.65), FMIAIMPACOM (0.01), FMIATVP (0.18), TVPIMPACOM (0.17). There was correlation among all reference planes. There were statistically significant differences among the means of the planes measured, except for IMPACOM, FMIA and TVP. The IMPA differed significantly from the IMPACOM. The compensated IMPA and the FMIA did not differ significantly from the TVP. The true horizontal plane was mismatched with Frankfort plane in 84% of the sample with a range of 19°. The true vertical plane is adequate for measuring lower incisor inclination. Sociedad Argentina de Investigación Odontológica.

Species-specific and seasonal differences in chlorophyll fluorescence and photosynthetic light response among three evergreen species in a Madrean sky island mixed conifer forest

NASA Astrophysics Data System (ADS)

Potts, D. L.; Minor, R. L.; Braun, Z.; Barron-Gafford, G. A.

2012-12-01

Unlike the snowmelt-dominated hydroclimate of more northern mountainous regions, the hydroclimate of the Madrean sky islands is characterized by snowmelt and convective storms associated with the North American Monsoon. These mid-summer storms trigger biological activity and are important drivers of primary productivity. For example, at the highest elevations where mixed conifer forests occur, ecosystem carbon balance is influenced by monsoon rains. Whereas these storms' significance is increasingly recognized at the ecosystem scale, species-specific physiological responses to the monsoon are poorly known. Prior to and following monsoon onset, we measured pre-dawn and light-adapted chlorophyll fluorescence as well as photosynthetic light response in southwestern white pine (Pinus strobiformis), ponderosa pine (Pinus ponderosa), and Douglas fir (Pseudotsuga menziesii) in a Madrean sky island mixed conifer forest near Tucson, Arizona. Photochemical quenching (qp), an indicator of the proportion of open PSII reaction centers, was greatest in P. strobiformis and least in P. menziesii and increased in response to monsoon rains (repeated-measures ANOVA; species, F2,14 = 6.17, P = 0.012; time, F2,14= 8.17, P = 0.013). In contrast, non-photochemical quenching (qN), an indicator of heat dissipation ability, was greatest in P. ponderosa and least in P. menziesii, but was not influenced by monsoon onset (repeated-measures ANOVA; species, F2,12 = 4.18, P = 0.042). Estimated from leaf area-adjusted photosynthetic light response curves, maximum photosynthetic rate (Amax) was greatest in P. ponderosa and least in P. menziesii (repeated-measures ANOVA; species, F2,8= 40.8, P = 0.001). Surprisingly, while the monsoon positively influenced Amax among P. ponderosa and P. strobiformis, Amax of P. menziesii declined with monsoon onset (repeated-measures ANOVA; species x time, F2,8 = 13.8, P = 0.002). Calculated as the initial slope of the photosynthetic light response curve, light-use efficiency (AQE) was similar among P. strobiformis and P. ponderosa and least in P. menziesii (repeated-measures ANOVA; species, F2,8 = 13.83, P = 0.002). Across all three species, monsoon onset increased AQE (repeated-measures ANOVA; time, F1,8= 10.04, P = 0.01). Likewise, P. strobiformis and P. ponderosa shared a similar, greater light compensation point than P. menziesii (repeated-measures ANOVA; species, F2,8 = 5.89, P = 0.02). However, across species, monsoon onset did not influence light compensation points. These results support the hypothesis that the monsoon has species-specific effects on evergreen physiological performance and are broadly consistent with predictions of stress tolerance based on species' latitudinal and elevational range distributions. Moreover, with year-to-year rainfall variability predicted to increase under future climate scenarios, species-specific functional traits related to stress tolerance and photosynthesis may promote ecosystem functional resilience in Madrean sky island mixed conifer forests.

Energy drinks and their component modulate attention, memory, and antioxidant defences in rats.

PubMed

Valle, M T Costa; Couto-Pereira, N S; Lampert, C; Arcego, D M; Toniazzo, A P; Limberger, R P; Dallegrave, E; Dalmaz, C; Arbo, M D; Leal, M B

2017-08-12

This study aimed to evaluate the effects of the subchronic consumption of energy drinks and their constituents (caffeine and taurine) in male Wistar rats using behavioural and oxidative measures. Energy drinks (ED 5, 7.5, and 10 mL/kg) or their constituents, caffeine (3.2 mg/kg) and taurine (40 mg/kg), either separately or in combination, were administered orally to animals for 28 days. Attention was measured though the ox-maze apparatus and the object recognition memory test. Following behavioural analyses, markers of oxidative stress, including SOD, CAT, GPx, thiol content, and free radicals, were measured in the prefrontal cortex, hippocampus, and striatum. The latency time to find the first reward was lower in animals that received caffeine, taurine, or a combination of both (P = 0.003; ANOVA/Bonferroni). In addition, these animals took less time to complete the ox-maze task (P = 0.0001; ANOVA/Bonferroni), and had better short-term memory (P < 0.01, Kruskal-Wallis). The ED 10 group showed improvement in the attention task, but did not differ on other measures. In addition, there was an imbalance in enzymatic markers of oxidative stress in the prefrontal cortex, the hippocampus, and the striatum. In the group that received both caffeine and taurine, there was a significant increase in the production of free radicals in the prefrontal cortex and in the hippocampus (P < 0.0001; ANOVA/Bonferroni). Exposure to a combination of caffeine and taurine improved memory and attention, and led to an imbalance in the antioxidant defence system. These results differed from those of the group that was exposed to the energy drink. This might be related to other components contained in the energy drink, such as vitamins and minerals, which may have altered the ability of caffeine and taurine to modulate memory and attention.

Syllabic patterns in typical and atypical phonological development: ultrasonographic analysis.

PubMed

Vassoler, Aline Mara de Oliveira; Berti, Larissa Cristina

2018-01-01

Objective The present study aims to compare the production of syllabic patterns of the CVC and CV types performed by Brazilian children with typical and atypical phonological development through ultrasonography of tongue. Methods Ten children (five with typical and with five atypical phonological development) recorded nine pairs of words from the syllables: CCV and CV. The images and audios were captured simultaneously by the Articulate Assistant Advanced software. The data were submitted to perceptive analysis and ultrasonographic articulatory analysis (the area between the tip and the blade of the tongue). The area measurements were submitted to one-way repeated measures ANOVA. Results ANOVA demonstrated a significant effect for the clinical condition (typical and atypical), (F (1.8) = 172.48, p> 0.000) forthe area measurements. In both syllabic patterns (CCV and CV) the atypical children showed greater values ​​of the area between the tip and the blade of the tongue. Regarding the syllabic patterns analyzed, the statistical test showed no significant effect (F (1.8)=0.19, p>0.658). Conclusion The use of a greater area of ​​the tongue by children with atypical phonological development suggests the non-differentiation of the tip and the anterior body gestures of the tongue in the production of CV and CCV.

Effects of Ankle Braces Upon Agility Course Performance in High School Athletes

PubMed Central

Beriau, Mark R.; Cox, William B.; Manning, James

1994-01-01

The purpose of this study was to compare the effects of wearing the AircastTM Sports Stirrup, AircastTM Training brace, Swede-OTM brace, and DonJoyTM Ankle Ligament Protector while running an agility course. Eighty-five high school athletes with no history of ankle injury and no experience in wearing any ankle support served as subjects. Each subject participated in four separate testing sessions. During sessions 1 and 4, subjects ran the agility course under the control (unbraced) conditions. Sessions 2 and 3 consisted of randomly wearing the ankle braces while running the agility course. A questionnaire concerning support, comfort, and restriction was completed by each subject after wearing each of the braces. An analysis of variance (ANOVA) with repeated measures revealed that a significant difference existed between the agility times. Tukey's post hoc test indicated that a significant difference existed between each ankle brace and the control 2 agility times as well as a control 1 and control 2 time difference. The control time difference was attributed to a learning effect. An ANOVA with repeated measures of only the four braces revealed that a significant difference existed between the agility times. Tukey's post hoc test showed the only difference was between the DonJoy Ankle Ligament Protector and the Aircast Training brace. We concluded: 1) there is limited practical performance effect upon agility while wearing an ankle brace; and 2) an athlete's perceived comfort, support, and performance restriction are contributing factors that may directly influence the effectiveness of ankle bracing. PMID:16558284

The effect of prolonged storage and disinfection on the dimensional stability of 5 vinyl polyether silicone impression materials.

PubMed

Nassar, Usama; Flores-Mir, Carlos; Heo, Giseon; Torrealba, Ysidora

2017-06-01

Vinyl polyether silicone (VPES) has a different composition from other elastomeric impression materials as it combines vinyl polysiloxane (VPS) and polyether (PE). Therefore, it is important to study its properties and behavior under different test conditions. This study investigated the dimensional stability of 5 VPES consistencies when stored for up to 2 weeks, with and without using a standard disinfection procedure. 40 discs of each VPES consistency (total 200) were made using a stainless steel die and ring as described by ANSI /ADA specification No. 19. 20 discs of each material were immersed in a 2.5% buffered glutaraldehyde solution for 30 minutes. Dimensional stability measurements were calculated immediately after fabrication and repeated on the same discs after 7 and 14 days of storage. The data was analyzed using two-way ANOVA with a significance level set at α = 0.05. The discs mean contraction was below 0.5% at all test times ranging from 0.200 ± 0.014 to 0.325 ± 0.007. Repeated measures ANOVA showed a statistically significant difference after 2-week storage between the disinfected and non-disinfected groups ( P < .001). Although there was no statistically significant difference between the materials at the time of fabrication, the contraction of the materials increased with storage for 1 and 2 weeks. The dimensional changes of VPES impression discs after disinfection and prolonged storage complied with ANSI/ADA standard. The tested VPES impression materials were dimensionally stable for clinical use after disinfection for 30 minutes in glutaraldehyde and storage for up to 2 weeks.

In vitro wear of new indirect resin composites.

PubMed

Jain, V; Platt, J A; Moore, B K; Borges, G A

2009-01-01

This in vitro study evaluated the toothbrush abrasion wear, three-body Alabama wear and two-body pin-on-disc wear of four commercial indirect resin composites. Enamel shades of Radica (R), Sculpture Plus (S), Belleglass-NG (B) and Gradia Indirect (G) were used. For measuring wear due to toothbrush abrasion, six specimens of each group were fabricated, then brushed in a toothbrush abrasion machine for 20,000 cycles. Material loss was determined by weighing and conversion to volume loss. Three-body wear was measured on six samples for each group using an Alabama-type wear testing machine for 400,000 cycles. Wear depth was measured with a contact profilometer. For two-body wear, five disc specimens were prepared and tested in a two-body wear-testing machine against hydroxypatite sliders for 25,000 cycles. Data were analyzed with one-way analysis of variance (ANOVA) and Tukey test (alpha=0.05). Wear was the highest in Sculpture Plus by all three methods tested and the lowest wear was observed in Belleglass-NG. No statistical difference in wear was noted from Radica.

Cautionary Note on Reporting Eta-Squared Values from Multifactor ANOVA Designs

ERIC Educational Resources Information Center

Pierce, Charles A.; Block, Richard A.; Aguinis, Herman

2004-01-01

The authors provide a cautionary note on reporting accurate eta-squared values from multifactor analysis of variance (ANOVA) designs. They reinforce the distinction between classical and partial eta-squared as measures of strength of association. They provide examples from articles published in premier psychology journals in which the authors…

The effect of Kinesio Taping on postural control in subjects with non-specific chronic low back pain.

PubMed

Abbasi, Soheila; Rojhani-Shirazi, Zahra; Shokri, Esmaeil; García-Muro San José, Francisco

2018-04-01

The aim of this study was to investigate the possible alterations in postural control during upright standing in subjects with non-specific chronic low back pain and the effect of Kinesio taping on the postural control. Twenty subjects with non-specific chronic low back pain and twenty healthy subjects participated in this study. The center of pressure excursion was evaluated before the intervention for both groups, and immediately after intervention for the low back pain group. Independent sample t-test, Mann-Whitney test and repeated measure ANOVA were used for the statistical analysis of the data. There were significant differences in the center of pressure excursion between the low back pain group versus the healthy group. The results of the ANOVA demonstrated a statistically significant difference in the mean COP displacement and velocity before Kinesio Taping, immediately after, and 24 h after in the low back pain group. There are poor postural control mechanisms in subjects with non-specific chronic low back pain. Kinesio taping seems to change postural control immediately and have lasting effects until the day after. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of translucence/opacity and shade in the flexural strength of lithium disilicate ceramics

PubMed Central

Santos, Mila Oliveira; do Amaral, Flávia Lucisano Botelho; França, Fabiana Mantovani Gomes; Basting, Roberta Tarkany

2015-01-01

Background: Lithium disilicate ceramic system consists of glass ceramic ingots with different grades of translucence which may influence its flexural strength. Aims: To assess the three-point flexural strength of the different lithium disilicate-based ceramic ingots (IPS e.max Press/Ivoclar Vivadent) with different levels of translucence and shade. Materials and Methods: Six groups of ceramic ingots were selected to represent different levels of translucence and shade (HTA1, HTBL2, LTA2, LTB2, MO2, and HO). They measured 25 mm × 5 mm × 2 mm (n = 10), according to ISO 6872 specifications, and tested on a universal test machine (EMIC). Statistical Analysis Used: A one-way analysis of variance (ANOVA) was used (α = 0.05). Results: The results (in MPa) were: HTA1 = 392.98; HTBL2 = 390.74; LTA2 = 390.46; LTB2 = 389.92; MO2 = 390.43; HO = 391.96. ANOVA showed no significant difference among groups (P = 0.1528). Conclusions: Different levels of translucence, opacity and shade of ingots did not affect their mechanical strength, and the use of these ceramics should be guided by the esthetic demands of each clinical situation. PMID:26430304

Detection of burst suppression patterns in EEG using recurrence rate.

PubMed

Liang, Zhenhu; Wang, Yinghua; Ren, Yongshao; Li, Duan; Voss, Logan; Sleigh, Jamie; Li, Xiaoli

2014-01-01

Burst suppression is a unique electroencephalogram (EEG) pattern commonly seen in cases of severely reduced brain activity such as overdose of general anesthesia. It is important to detect burst suppression reliably during the administration of anesthetic or sedative agents, especially for cerebral-protective treatments in various neurosurgical diseases. This study investigates recurrent plot (RP) analysis for the detection of the burst suppression pattern (BSP) in EEG. The RP analysis is applied to EEG data containing BSPs collected from 14 patients. Firstly we obtain the best selection of parameters for RP analysis. Then, the recurrence rate (RR), determinism (DET), and entropy (ENTR) are calculated. Then RR was selected as the best BSP index one-way analysis of variance (ANOVA) and multiple comparison tests. Finally, the performance of RR analysis is compared with spectral analysis, bispectral analysis, approximate entropy, and the nonlinear energy operator (NLEO). ANOVA and multiple comparison tests showed that the RR could detect BSP and that it was superior to other measures with the highest sensitivity of suppression detection (96.49%, P = 0.03). Tracking BSP patterns is essential for clinical monitoring in critically ill and anesthetized patients. The purposed RR may provide an effective burst suppression detector for developing new patient monitoring systems.

Effect of metal selection and porcelain firing on the marginal accuracy of titanium-based metal ceramic restorations.

PubMed

Shokry, Tamer E; Attia, Mazen; Mosleh, Ihab; Elhosary, Mohamed; Hamza, Tamer; Shen, Chiayi

2010-01-01

Titanium is the most biocompatible metal used for dental casting; however, there is concern about its marginal accuracy after porcelain application since this aspect has direct influence on marginal fit. The purpose of this study was to determine the effect that metal selection and the porcelain firing procedure have on the marginal accuracy of metal ceramic prostheses. Cast CP Ti, milled CP Ti, cast Ti-6Al-7Nb, and cast Ni-Cr copings (n=5) were fired with compatible porcelains (Triceram for titanium-based metals and VITA VMK 95 for Ni-Cr alloy). The Ni-Cr alloy fired with its porcelain served as the control. Photographs of metal copings placed on a master die were made. Marginal discrepancy was determined on the photographs using an image processing program at 8 predetermined locations before airborne-particle abrasion for porcelain application, after firing of the opaque layer, and after firing of the dentin layer. Repeated-measures 2-way ANOVA was used to investigate the effect of metal selection and firing stage, and paired t tests were used to determine the effect of each firing stage within each material group (alpha=.05). ANOVA showed that both metal selection and firing stage significantly influenced the measured marginal discrepancy (P<.001), and there was interaction between the 2 variables (P<.001). Student-Newman-Keuls multiple comparison tests showed that there were significant differences between any 2 metals compared, at each stage of measurement. Paired t tests showed that significant changes in marginal discrepancy occurred with opaque firing on milled CP Ti (P=.017) and cast Ti-6Al-7Nb alloy (P=.003). Titanium copings fabricated by CAD/CAM demonstrated the least marginal discrepancy among all groups, while the base metal (Ni-Cr) groups exhibited the most discrepancy of all groups tested. Copyright 2010 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Vision maintenance and retinal apoptosis reduction in RCS rats with Okayama University-type retinal prosthesis (OUReP™) implantation.

PubMed

Alamusi; Matsuo, Toshihiko; Hosoya, Osamu; Tsutsui, Kimiko M; Uchida, Tetsuya

2015-09-01

Photoelectric dye-coupled polyethylene film, designated Okayama University-type retinal prosthesis or OUReP™, generates light-evoked surface electric potentials and stimulates neurons. In this study, the vision was assessed by behavior tests in aged hereditary retinal dystrophic RCS rats with OUReP™, retinal apoptosis and electroretinographic responses were measured in dystrophic eyes with OUReP™. The dye-coupled films, or plain films as a control, were implanted in subretinal space of RCS rats. On behavior tests, RCS rats with dye-coupled films, implanted at the old age of 14 weeks, showed the larger number of head-turning, consistent with clockwise and anticlockwise rotation of a surrounding black-and-white-striped drum, compared with rats with plain films, under the dim (50 lux) and bright (150 lux) conditions in the observation period until the age of 22 weeks (n = 5, P < 0.05, repeated-measure ANOVA). The number of apoptotic cells in retinal sections at the site of dye-coupled film implantation was significantly smaller, compared with the other retinal sites, neighboring the film, or opposite to the film, 5 months after film implantation at the age of 6 weeks (P = 0.0021, Friedman test). The dystrophic eyes of RCS rats with dye-coupled films showed positive responses to maximal light stimulus at a significantly higher rate, compared with the eyes with no treatment (P < 0.05, Chi-square test). Electroretinograms in normal eyes of Wistar rats with dye-coupled or plain films showed significantly decreased amplitudes (n = 14, P < 0.05, repeated-measure ANOVA). In conclusions, vision was maintained in RCS rats with dye-coupled films implanted at the old age. The dystrophic eyes with dye-coupled films showed electroretinographic responses. Five-month film implantation caused no additional retinal changes.

The effects of listening to preferred music on pain intensity after open heart surgery

PubMed Central

Jafari, Hedayat; Zeydi, Amir Emami; Khani, Soghra; Esmaeili, Ravanbakhsh; Soleimani, Aria

2012-01-01

Background: Pain is a common phenomenon after surgery. Cardiac surgeries are no exception and patients generally experience acute pain after these surgeries. Inadequate pain management after cardiac surgery predisposes patients to many complications. Therefore, the aim of this study was to determine the effects of listening to preferred music on pain intensity after open heart surgery. Materials and Methods: This study was a randomized clinical trial (RCT) conducted in open heart intensive care unit (ICU) of a university hospital in Sari, Iran. A total of 60 patients who were scheduled to undergo open heart surgery were randomly allocated in two groups. Patients in the intervention group (n = 30) listened to their preferred music by headphones for 30 minutes, whereas those in the control group (n = 30) did not listen to music. Using a Numerical Rating Scale (NRS), pain intensity was measured among the patients before the intervention, and immediately, 30 minutes and one hour after the intervention. Data was analyzed by Chi-square test, student's t-test and repeated measures analysis of variance (ANOVA). Findings: Mean pain intensity in the intervention group before, immediately after, 30 minutes and one hour after the intervention were 5.8, 3.1, 2.5 and 2.4, respectively. Corresponding numbers in the control group were 4.7, 4.7, 4.8 and 4.9, respectively. Repeated measures ANOVA showed music to significantly reduce pain intensity (p = 0.0001) Conclusions: Music can be effective as a non-pharmacological, inexpensive, non-invasive and side effect free method for pain management after open heart surgery. PMID:23493927

The effect of coating patterns with spinel-based investment on the castability and porosity of titanium cast into three phosphate-bonded investments.

PubMed

Pieralini, Anelise R F; Benjamin, Camila M; Ribeiro, Ricardo Faria; Scaf, Gulnara; Adabo, Gelson Luis

2010-10-01

This study evaluated the effect of pattern coating with spinel-based investment Rematitan Ultra (RU) on the castability and internal porosity of commercially pure (CP) titanium invested into phosphate-bonded investments. The apparent porosity of the investment was also measured. Square patterns (15 × 15 × 0.3 mm(3)) were either coated with RU, or not and invested into the phosphate-bonded investments: Rematitan Plus (RP), Rema Exakt (RE), Castorit Super C (CA), and RU (control group). The castings were made in an Ar-arc vacuum-pressure machine. The castability area (mm(2) ) was measured by an image-analysis system (n = 10). For internal porosity, the casting (12 × 12 × 2 mm(3) ) was studied by the X-ray method, and the projected porous area percentage was measured by an image-analysis system (n = 10). The apparent porosity of the investment (n = 10) was measured in accordance with the ASTM C373-88 standard. Analysis of variance (One-way ANOVA) of castability was significant, and the Tukey test indicated that RU had the highest mean but the investing technique with coating increased the castability for all phosphate-bonded investments. The analysis of the internal porosity of the cast by the nonparametric test demonstrated that the RP, RE, and CA with coating and RP without coating did not differ from the control group (RU), while the CA and RE casts without coating were more porous. The one-way ANOVA of apparent porosity of the investment was significant, and the Tukey test showed that the means of RU (36.10%) and CA (37.22%) were higher than those of RP (25.91%) and RE (26.02%). Pattern coating with spinel-based material prior to phosphate-bonded investments can influence the castability and the internal porosity of CP Ti. © 2010 by The American College of Prosthodontists.

The effect of neonatal handling on adult feeding behavior is not an anxiety-like behavior.

PubMed

Silveira, P P; Portella, A K; Clemente, Z; Gamaro, G D; Dalmaz, C

2005-02-01

Brief periods of handling during the neonatal period have been shown to have profound and long-lasting physiological consequences. Previous studies performed in our laboratory have demonstrated that handling the pups during the neonatal period leads to increased sweet food ingestion in adult life. The objective of this study is to verify if this effect could be explained by the enhanced anxiety levels in these animals. Litters were divided in: (1) intact; (2) handled (10 min in an incubator/day) and (3) handled + tactile stimulation (10 min/day). Procedures were performed on days 1-10 after birth. When adults, rats were tested in the elevated plus maze apparatus, light dark exploration test and open field test. They were also tested for sweet food ingestion, being injected with 2 mg/kg diazepam or vehicle 60 min before the test. Handling and handling + tactile stimulation do not alter performance in the plus maze test, but handled rats presented more crossings in the light/dark exploration test and open field (two-way ANOVA). Females also spent more % time in the open arms in the plus maze and more time in the lit compartment in the light/dark test, presenting more crossings in both tests. Both treated rats (handled and handled + tactile stimulation groups) consumed more sweet food than intact ones (two-way ANOVA). When diazepam was injected prior to the measurement of sweet food ingestion, there was no effect of the drug. We suggest that handling during the neonatal period leads to plastic alterations in the central nervous system of these animals, causing an increased ingestion of palatable food in adult life, and this alteration does not express an anxiety-like behavior.

Validity and reliability of the Short Physical Performance Battery (SPPB): a pilot study on mobility in the Colombian Andes.

PubMed

Gómez, José Fernando; Curcio, Carmen-Lucía; Alvarado, Beatriz; Zunzunegui, María Victoria; Guralnik, Jack

2013-07-01

To assess the validity (convergent and construct) and reliability of the Short Physical Performance Battery (SPPB) among non-disabled adults between 65 to 74 years of age residing in the Andes Mountains of Colombia. Design Validation study; 150 subjects aged 65 to 74 years recruited from elderly associations (day-centers) in Manizales, Colombia. The SPPB tests of balance, including time to walk 4 meters and time required to stand from a chair 5 times were administered to all participants. Reliability was analyzed with a 7-day interval between assessments and use of repeated ANOVA testing. Construct validity was assessed using factor analysis and by testing the relationship between SPPB and depressive symptoms, cognitive function, and self rated health (SRH), while the concurrent validity was measured through relationships with mobility limitations and disability in Activities of Daily Living (ADL). ANOVA tests were used to establish these associations. Test-retest reliability of the SPPB was high: 0.87 (CI95%: 0.77-0.96). A one factor solution was found with three SPPB tests. SPPB was related to self-rated health, limitations in walking and climbing steps and to indicators of disability, as well as to cognitive function and depression. There was a graded decrease in the mean SPPB score with increasing disability and poor health. The Spanish version of SPPB is reliable and valid to assess physical performance among older adults from our region. Future studies should establish their clinical applications and explore usage in population studies.

DANCE, BALANCE AND CORE MUSCLE PERFORMANCE MEASURES ARE IMPROVED FOLLOWING A 9-WEEK CORE STABILIZATION TRAINING PROGRAM AMONG COMPETITIVE COLLEGIATE Dancers.

PubMed

Watson, Todd; Graning, Jessica; McPherson, Sue; Carter, Elizabeth; Edwards, Joshuah; Melcher, Isaac; Burgess, Taylor

2017-02-01

Dance performance requires not only lower extremity muscle strength and endurance, but also sufficient core stabilization during dynamic dance movements. While previous studies have identified a link between core muscle performance and lower extremity injury risk, what has not been determined is if an extended core stabilization training program will improve specific measures of dance performance. This study examined the impact of a nine-week core stabilization program on indices of dance performance, balance measures, and core muscle performance in competitive collegiate dancers. Within-subject repeated measures design. A convenience sample of 24 female collegiate dance team members (age = 19.7 ± 1.1 years, height = 164.3 ± 5.3 cm, weight 60.3 ± 6.2 kg, BMI = 22.5 ± 3.0) participated. The intervention consisted of a supervised and non-supervised core (trunk musculature) exercise training program designed specifically for dance team participants performed three days/week for nine weeks in addition to routine dance practice. Prior to the program implementation and following initial testing, transversus abdominis (TrA) activation training was completed using the abdominal draw-in maneuver (ADIM) including ultrasound imaging (USI) verification and instructor feedback. Paired t tests were conducted regarding the nine-week core stabilization program on dance performance and balance measures (pirouettes, single leg balance in passe' releve position, and star excursion balance test [SEBT]) and on tests of muscle performance. A repeated measures (RM) ANOVA examined four TrA instruction conditions of activation: resting baseline, self-selected activation, immediately following ADIM training and four days after completion of the core stabilization training program. Alpha was set at 0.05 for all analysis. Statistically significant improvements were seen on single leg balance in passe' releve and bilateral anterior reach for the SEBT (both p ≤ 0.01), number of pirouettes (p = 0.011), and all measures of strength (p ≤ 0.05) except single leg heel raise. The RM ANOVA on mean percentage of change in TrA was significant; post hoc paired t tests demonstrated significant improvements in dancers' TrA activations across the four instruction conditions. This core stabilization training program improves pirouette ability, balance (static and dynamic), and measures of muscle performance. Additionally, ADIM training resulted in immediate and short-term (nine-week) improvements in TrA activation in a functional dance position. 2b.

DANCE, BALANCE AND CORE MUSCLE PERFORMANCE MEASURES ARE IMPROVED FOLLOWING A 9-WEEK CORE STABILIZATION TRAINING PROGRAM AMONG COMPETITIVE COLLEGIATE Dancers

PubMed Central

Graning, Jessica; McPherson, Sue; Carter, Elizabeth; Edwards, Joshuah; Melcher, Isaac; Burgess, Taylor

2017-01-01

Background Dance performance requires not only lower extremity muscle strength and endurance, but also sufficient core stabilization during dynamic dance movements. While previous studies have identified a link between core muscle performance and lower extremity injury risk, what has not been determined is if an extended core stabilization training program will improve specific measures of dance performance. Hypothesis/Purpose This study examined the impact of a nine-week core stabilization program on indices of dance performance, balance measures, and core muscle performance in competitive collegiate dancers. Study Design Within-subject repeated measures design. Methods A convenience sample of 24 female collegiate dance team members (age = 19.7 ± 1.1 years, height = 164.3 ± 5.3 cm, weight 60.3 ± 6.2 kg, BMI = 22.5 ± 3.0) participated. The intervention consisted of a supervised and non-supervised core (trunk musculature) exercise training program designed specifically for dance team participants performed three days/week for nine weeks in addition to routine dance practice. Prior to the program implementation and following initial testing, transversus abdominis (TrA) activation training was completed using the abdominal draw-in maneuver (ADIM) including ultrasound imaging (USI) verification and instructor feedback. Paired t tests were conducted regarding the nine-week core stabilization program on dance performance and balance measures (pirouettes, single leg balance in passe’ releve position, and star excursion balance test [SEBT]) and on tests of muscle performance. A repeated measures (RM) ANOVA examined four TrA instruction conditions of activation: resting baseline, self-selected activation, immediately following ADIM training and four days after completion of the core stabilization training program. Alpha was set at 0.05 for all analysis. Results Statistically significant improvements were seen on single leg balance in passe’ releve and bilateral anterior reach for the SEBT (both p ≤ 0.01), number of pirouettes (p = 0.011), and all measures of strength (p ≤ 0.05) except single leg heel raise. The RM ANOVA on mean percentage of change in TrA was significant; post hoc paired t tests demonstrated significant improvements in dancers’ TrA activations across the four instruction conditions Conclusion This core stabilization training program improves pirouette ability, balance (static and dynamic), and measures of muscle performance. Additionally, ADIM training resulted in immediate and short-term (nine-week) improvements in TrA activation in a functional dance position. Level of Evidence 2b PMID:28217414

Cognitive domains in the dog: independence of working memory from object learning, selective attention, and motor learning.

PubMed

Zanghi, Brian M; Araujo, Joseph; Milgram, Norton W

2015-05-01

Cognition in dogs, like in humans, is not a unitary process. Some functions, such as simple discrimination learning, are relatively insensitive to age; others, such as visuospatial learning can provide behavioral biomarkers of age. The present experiment sought to further establish the relationship between various cognitive domains, namely visuospatial memory, object discrimination learning (ODL), and selective attention (SA). In addition, we also set up a task to assess motor learning (ML). Thirty-six beagles (9-16 years) performed a variable delay non-matching to position (vDNMP) task using two objects with 20- and 90-s delay and were divided into three groups based on a combined score (HMP = 88-93 % accuracy [N = 12]; MMP = 79-86 % accuracy [N = 12]; LMP = 61-78 % accuracy [N = 12]). Variable object oddity task was used to measure ODL (correct or incorrect object) and SA (0-3 incorrect distractor objects with same [SA-same] or different [SA-diff] correct object as ODL). ML involved reaching various distances (0-15 cm). Age did not differ between memory groups (mean 11.6 years). ODL (ANOVA P = 0.43), or SA-same and SA-different (ANOVA P = 0.96), performance did not differ between the three vDNMP groups, although mean errors during ODL was numerically higher for LMP dogs. Errors increased (P < 0.001) for all dogs with increasing number of distractor objects during both SA tasks. vDNMP groups remained different (ANOVA P < 0.001) when re-tested with vDNMP task 42 days later. Maximum ML distance did not differ between vDNMP groups (ANOVA P = 0.96). Impaired short-term memory performance in aged dogs does not appear to predict performance of cognitive domains associated with object learning, SA, or maximum ML distance.

The effect of brushing with nano calcium carbonate and calcium carbonate toothpaste on the surface roughness of nano-ionomer

NASA Astrophysics Data System (ADS)

Anisja, D. H.; Indrani, D. J.; Herda, E.

2017-08-01

Nanotechnology developments in dentistry have resulted in the development of nano-ionomer, a new restorative material. The surface roughness of restorative materials can increase bacteria adhesion and lead to poor oral hygiene. Abrasive agents in toothpaste can alter tooth and restorative material surfaces. The aim of this study is to identify the effect of brushing with nano calcium carbonate, and calcium carbonate toothpaste on surface roughness of nano-ionomer. Eighteen nano-ionomer specimens were brushed with Aquabidest (doubledistilled water), nano calcium carbonate and calcium carbonate toothpaste. Brushing lasted 30 minutes, and the roughness value (Ra) was measured after each 10 minute segment using a surface roughness tester. The data was analyzed using repeated ANOVA and one-way ANOVA test. The value of nano-ionomer surface roughness increased significantly (p<0.05) after 20 minutes of brushing with the nano calcium carbonate toothpaste. Brushing with calcium carbonate toothpaste leaves nano-ionomer surfaces more rugged than brushing with nano calcium carbonate toothpaste.

EFFECT OF LIGHT-CURING UNITS AND ACTIVATION MODE ON POLYMERIZATION SHRINKAGE AND SHRINKAGE STRESS OF COMPOSITE RESINS

PubMed Central

Lopes, Lawrence Gonzaga; Franco, Eduardo Batista; Pereira, José Carlos; Mondelli, Rafael Francisco Lia

2008-01-01

The aim of this study was to evaluate the polymerization shrinkage and shrinkage stress of composites polymerized with a LED and a quartz tungsten halogen (QTH) light sources. The LED was used in a conventional mode (CM) and the QTH was used in both conventional and pulse-delay modes (PD). The composite resins used were Z100, A110, SureFil and Bisfil 2B (chemical-cured). Composite deformation upon polymerization was measured by the strain gauge method. The shrinkage stress was measured by photoelastic analysis. The polymerization shrinkage data were analyzed statistically using two-way ANOVA and Tukey test (p≤0.05), and the stress data were analyzed by one-way ANOVA and Tukey's test (p≤0.05). Shrinkage and stress means of Bisfil 2B were statistically significant lower than those of Z100, A110 and SureFil. In general, the PD mode reduced the contraction and the stress values when compared to CM. LED generated the same stress as QTH in conventional mode. Regardless of the activation mode, SureFil produced lower contraction and stress values than the other light-cured resins. Conversely, Z100 and A110 produced the greatest contraction and stress values. As expected, the chemically cured resin generated lower shrinkage and stress than the light-cured resins. In conclusion, The PD mode effectively decreased contraction stress for Z100 and A110. Development of stress in light-cured resins depended on the shrinkage value. PMID:19089287

The interdisciplinary effect of hands-on science as measured by the Tennessee Comprehensive Assessment Program (TCAP)

NASA Astrophysics Data System (ADS)

Cherry, Elvis H.

This study examined the difference in scale scores from Tennessee's standardized test the Tennessee Comprehensive Assessment Program (TCAP). Archival data from the years 2002 and 2005 were compared using ANOVA tests at < .01 and < .05 levels. TCAP/NCE Scale Scores for academic subjects of Science, Math, Social Studies and Reading were used. 3922 student test results were divided into groups based on the number of years the student had a trained hands-on science teacher. Trained hands-on science teachers were identified from Metropolitan Nashville Public Schools (MNPS) Science Department inservice records, which gave information on the teacher's participation in The Hands-on Science Initiative, Biology Gateway and Physical Science training. This information included not only that the teacher had be trained but also the dates of training. The study revealed 1600 students who attended MNPS between the years 2002 and 2005; in grades five through seven that never had a hands-on science trained teacher. About 1600 students in those same years had a hands-on science teacher for only one year, and 588 students had a hands-on science teacher for two of the three years. Lastly of the 3922 students in the study there were 44 students who had a hands-on science teacher for all three years. The results of the ANOVA test showed statistically significant gains in science, math and social studies but not in reading for students who had trained hands-on science teachers for at least one year.

Micro-shear bond strength of resin cement to dentin after application of desensitizing toothpastes.

PubMed

Bavbek, Andac Barkin; Goktas, Baris; Cekic-Nagas, Isil; Egilmez, Ferhan; Ergun, Gulfem; Eskitascioglu, Gurcan

2013-01-01

The aim of the study was to evaluate the effect of three desensitizing toothpastes on bonding of resin cements to dentin. The occlusal surfaces of 72 maxillary third molars were ground to obtain flat dentin surfaces and then divided into three groups according to three desensitizing toothpastes used: Sensodyne Rapid Relief (GlaxoSmithKline, SmithKline Beecham Ltd., Slough, UK), Signal Sensitive Expert (Unilever Sanayi ve Ticaret Türk A.Ş., Ümraniye, İstanbul, Turkey) and Colgate Sensitive Pro-Relief (Colgate Palmolive, New York, NY). Following bonding of the resin cement (Clearfil™ SA Cement, Kuraray Co, Osaka, Japan) to dentin, the specimens were light cured for 40 s with a LED (Elipar S10, 3M Espe, St. Paul, MN). The strength measurements were accomplished with a micro-shear testing machine (Bisco, Schaumburg, IL) at a cross-head speed of 0.5 mm/min until the failure occurs. Failure modes were examined using a stereomicroscope and scanning electron microscope. The data were analyzed with one-way analysis of variance (ANOVA) and Tukey HSD test (α = 0.05). ANOVA revealed that the application of desensitizing toothpastes had significant effects on bond strength of the resin cement tested to dentin (p < 0.05). Mixed failures were observed in all of the groups. The use of a desensitizing toothpaste before cementation might alter the bond strength of adhesively luted restorations.

Validation of Cardiovascular Parameters during NASA's Functional Task Test

NASA Technical Reports Server (NTRS)

Arzeno, N. M.; Stenger, M. B.; Bloomberg, J. J.; Platts, S. H.

2009-01-01

Microgravity exposure causes physiological deconditioning and impairs crewmember task performance. The Functional Task Test (FTT) is designed to correlate these physiological changes to performance in a series of operationally-relevant tasks. One of these, the Recovery from Fall/Stand Test (RFST), tests both the ability to recover from a prone position and cardiovascular responses to orthostasis. PURPOSE: Three minutes were chosen for the duration of this test, yet it is unknown if this is long enough to induce cardiovascular responses similar to the operational 5 min stand test. The purpose of this study was to determine the validity and reliability of heart rate variability (HRV) analysis of a 3 min stand and to examine the effect of spaceflight on these measures. METHODS: To determine the validity of using 3 vs. 5 min of standing to assess HRV, ECG was collected from 7 healthy subjects who participated in a 6 min RFST. Mean R-R interval (RR) and spectral HRV were measured in minutes 0-3 and 0-5 following the heart rate transient due to standing. Significant differences between the segments were determined by a paired t-test. To determine the reliability of the 3-min stand test, 13 healthy subjects completed 3 trials of the FTT on separate days, including the RFST with a 3 min stand. Analysis of variance (ANOVA) was performed on the HRV measures. One crewmember completed the FTT before a 14-day mission, on landing day (R+0) and one (R+1) day after returning to Earth. RESULTS VALIDITY: HRV measures reflecting autonomic activity were not significantly different during the 0-3 and 0-5 min segments. RELIABILITY: The average coefficient of variation for RR, systolic (SBP) and diastolic blood pressures during the RFST were less than 8% for the 3 sessions. ANOVA results yielded a greater inter-subject variability (p<0.006) than inter-session variability (p>0.05) for HRV in the RFST. SPACEFLIGHT: Lower RR and higher SBP were observed on R+0 in rest and stand. On R+1, both RR and SBP trended towards preflight rest and stand values. Postflight HRV showed higher LF/HF for rest and stand and lower HFnu during rest. CONCLUSION: These studies show that a 3 min stand delivers repeatable HRV data in the context of this larger series of FTT tests. Spaceflight-induced changes in blood pressure, RR and autonomic function (HRV) are evident from the RFST.

Gloss and Stain Resistance of Ceramic-Polymer CAD/CAM Restorative Blocks.

PubMed

Lawson, Nathaniel C; Burgess, John O

2016-03-01

To evaluate the gloss and stain resistance of several new ceramic-polymer CAD/CAM blocks Specimens (4 mm) were sectioned from: Enamic (polymer-infused ceramic), LAVA Ultimate (nano-ceramic reinforced polymer), e.max (lithium disilicate), Paradigm C (porcelain), and Paradigm MZ100 (composite). Specimens were wet polished on a polishing wheel to either 320 grit silicon paper (un-polished, N = 8) or 2000 grit silicon carbide papers followed by a 0.05 μm alumina slurry (polished, N = 8). Initial gloss and color (L*a*b*) values were measured. Specimens were stored in a staining solution at 37°C in darkness for 12 days (simulating 1 year). After storage, L*a*b* values re-measured. Change in color was reported as ΔE00 based on the CIEDE2000 formula. Gloss and ΔE00 were analyzed by two-way analysis of variance (ANOVA) (alpha = .05). Separate one-way ANOVA and Tukey post-hoc analyses were performed for both polish conditions and all materials. Two-way ANOVA showed that factors material, polish and their interaction were significant for both gloss and ΔE00 (p < .01). Post-hoc analysis reveals that polished specimens had significantly less color change than un-polished specimens for Paradigm C and LAVA Ultimate. E.max had significantly higher gloss and less color change than all other materials. The composition and polish of CAD/CAM materials affects gloss and stain resistance. Ceramic-polymer hybrid materials can achieve the high gloss required for esthetic restorations. These materials should be polished in order to minimize staining. If polished, all of the tested materials exhibited clinically acceptable color changes at 1 year of simulated staining. (J Esthet Restor Dent 28:S40-S45, 2016). © 2015 Wiley Periodicals, Inc.

Comparison of Three Methods of Assessing Muscle Strength and Imbalance Ratios of the Knee

PubMed Central

Moss, Crayton L.; Wright, P. Thomas

1993-01-01

Three strength measurement methods for determining muscle strength and imbalance ratios of the knee were compared in 41 (23 female, 18 male) NCAA Division I track and field athletes. Peak quadriceps extensions and hamstring flexions were measured isotonically, isometrically, and isokinetically. Isokinetic measurements were performed on a Cybex II at 60°/s. Isometric extension and flexion measurements were performed using the Nicholas Manual Muscle Tester (Lafayette Instruments; Lafayette, Ind). Isotonic measurements were done on both Universal and Nautilus apparatuses. Testing order was randomized to avoid a treatment order effect. A repeated measures ANOVA and a post hoc Tukey test were used to compare the three methods of assessing strength and imbalance ratios of the knee. Absolute strength values were significantly different according to gender and mode of testing. Bilateral strength imbalance ratios for knee flexion were significantly lower for the Nautilus leg curl machine. Ipsilateral strength imbalance ratios were significantly greater for the Cybex II. Our results indicated that absolute strength values cannot be interchanged between testing modes. Except for Cybex II (ipsilateral) and Nautilus (bilateral knee flexion), strength imbalance ratios could be interchanged. ImagesFig 1.Fig 2.Fig 3.Fig 4.Fig 5.Fig 6.Fig 7.INGING PMID:16558207

Effects of changes in dietary fatty acids on isolated skeletal muscle functions in rats.

PubMed

Ayre, K J; Hulbert, A J

1996-02-01

The effects of manipulating dietary levels of essential polyunsaturated fatty acids on the function of isolated skeletal muscles in male Wistar rats were examined. Three isoenergetic diets were used: an essential fatty acid-deficient diet (EFAD), a diet high in essential (n-6) fatty acids [High (n-6)], and a diet enriched with essential (n-3) fatty acids [High (n-3)]. After 9 wk, groups of rats on each test diet were fed a stock diet of laboratory chow for a further 6 wk. Muscle function was examined by using a battery of five tests for soleus (slow twitch) and extensor digitorum longus (EDL; fast twitch). Tests included single muscle twitches, sustained tetanic contractions, posttetanic potentiation, sustained high-frequency stimulation, and intermittent low-frequency stimulation. Results for muscles from the High (n-6) and High (n-3) groups were very similar. However, the EFAD diet resulted in significantly lower muscular tensions and reduced response times compared with the High (n-6) and High (n-3) diets. Peak twitch tension in soleus muscles was 16-21% less in the EFAD group than in the High (n-6) and High (n-3) groups, respectively [analysis of variance (ANOVA), P < 0.01). During high-frequency stimulation, EDL muscles from the EFAD rats fatigued 32% more quickly (ANOVA, P < 0.01)]. Also, twitch contraction and half-relaxation times were significantly 5-7% reduced in the EFAD group (ANOVA, P < 0.01). During intermittent low-frequency stimulation, soleus muscles from the EFAD group generated 25-28% less tension than did the other groups (ANOVA, P < 0.01), but in EDL muscles from the EFAD group, endurance was 20% greater than in the High (n-6) group (ANOVA, P < 0.05). After 6 wk on the stock diet, there were no longer any differences between the dietary groups. Manipulation of dietary fatty acids results in significant, but reversible, effects in muscles of rats fed an EFAD diet.

Nationwide Multicenter Reference Interval Study for 28 Common Biochemical Analytes in China.

PubMed

Xia, Liangyu; Chen, Ming; Liu, Min; Tao, Zhihua; Li, Shijun; Wang, Liang; Cheng, Xinqi; Qin, Xuzhen; Han, Jianhua; Li, Pengchang; Hou, Li'an; Yu, Songlin; Ichihara, Kiyoshi; Qiu, Ling

2016-03-01

A nationwide multicenter study was conducted in the China to explore sources of variation of reference values and establish reference intervals for 28 common biochemical analytes, as a part of the International Federation of Clinical Chemistry and Laboratory Medicine, Committee on Reference Intervals and Decision Limits (IFCC/C-RIDL) global study on reference values. A total of 3148 apparently healthy volunteers were recruited in 6 cities covering a wide area in China. Blood samples were tested in 2 central laboratories using Beckman Coulter AU5800 chemistry analyzers. Certified reference materials and value-assigned serum panel were used for standardization of test results. Multiple regression analysis was performed to explore sources of variation. Need for partition of reference intervals was evaluated based on 3-level nested ANOVA. After secondary exclusion using the latent abnormal values exclusion method, reference intervals were derived by a parametric method using the modified Box-Cox formula. Test results of 20 analytes were made traceable to reference measurement procedures. By the ANOVA, significant sex-related and age-related differences were observed in 12 and 12 analytes, respectively. A small regional difference was observed in the results for albumin, glucose, and sodium. Multiple regression analysis revealed BMI-related changes in results of 9 analytes for man and 6 for woman. Reference intervals of 28 analytes were computed with 17 analytes partitioned by sex and/or age. In conclusion, reference intervals of 28 common chemistry analytes applicable to Chinese Han population were established by use of the latest methodology. Reference intervals of 20 analytes traceable to reference measurement procedures can be used as common reference intervals, whereas others can be used as the assay system-specific reference intervals in China.

Nationwide Multicenter Reference Interval Study for 28 Common Biochemical Analytes in China

PubMed Central

Xia, Liangyu; Chen, Ming; Liu, Min; Tao, Zhihua; Li, Shijun; Wang, Liang; Cheng, Xinqi; Qin, Xuzhen; Han, Jianhua; Li, Pengchang; Hou, Li’an; Yu, Songlin; Ichihara, Kiyoshi; Qiu, Ling

2016-01-01

Abstract A nationwide multicenter study was conducted in the China to explore sources of variation of reference values and establish reference intervals for 28 common biochemical analytes, as a part of the International Federation of Clinical Chemistry and Laboratory Medicine, Committee on Reference Intervals and Decision Limits (IFCC/C-RIDL) global study on reference values. A total of 3148 apparently healthy volunteers were recruited in 6 cities covering a wide area in China. Blood samples were tested in 2 central laboratories using Beckman Coulter AU5800 chemistry analyzers. Certified reference materials and value-assigned serum panel were used for standardization of test results. Multiple regression analysis was performed to explore sources of variation. Need for partition of reference intervals was evaluated based on 3-level nested ANOVA. After secondary exclusion using the latent abnormal values exclusion method, reference intervals were derived by a parametric method using the modified Box–Cox formula. Test results of 20 analytes were made traceable to reference measurement procedures. By the ANOVA, significant sex-related and age-related differences were observed in 12 and 12 analytes, respectively. A small regional difference was observed in the results for albumin, glucose, and sodium. Multiple regression analysis revealed BMI-related changes in results of 9 analytes for man and 6 for woman. Reference intervals of 28 analytes were computed with 17 analytes partitioned by sex and/or age. In conclusion, reference intervals of 28 common chemistry analytes applicable to Chinese Han population were established by use of the latest methodology. Reference intervals of 20 analytes traceable to reference measurement procedures can be used as common reference intervals, whereas others can be used as the assay system-specific reference intervals in China. PMID:26945390

The effect of prolonged storage and disinfection on the dimensional stability of 5 vinyl polyether silicone impression materials

PubMed Central

Flores-Mir, Carlos; Heo, Giseon; Torrealba, Ysidora

2017-01-01

PURPOSE Vinyl polyether silicone (VPES) has a different composition from other elastomeric impression materials as it combines vinyl polysiloxane (VPS) and polyether (PE). Therefore, it is important to study its properties and behavior under different test conditions. This study investigated the dimensional stability of 5 VPES consistencies when stored for up to 2 weeks, with and without using a standard disinfection procedure. MATERIALS AND METHODS 40 discs of each VPES consistency (total 200) were made using a stainless steel die and ring as described by ANSI /ADA specification No. 19. 20 discs of each material were immersed in a 2.5% buffered glutaraldehyde solution for 30 minutes. Dimensional stability measurements were calculated immediately after fabrication and repeated on the same discs after 7 and 14 days of storage. The data was analyzed using two-way ANOVA with a significance level set at α = 0.05. RESULTS The discs mean contraction was below 0.5% at all test times ranging from 0.200 ± 0.014 to 0.325 ± 0.007. Repeated measures ANOVA showed a statistically significant difference after 2-week storage between the disinfected and non-disinfected groups (P < .001). Although there was no statistically significant difference between the materials at the time of fabrication, the contraction of the materials increased with storage for 1 and 2 weeks. CONCLUSION The dimensional changes of VPES impression discs after disinfection and prolonged storage complied with ANSI/ADA standard. The tested VPES impression materials were dimensionally stable for clinical use after disinfection for 30 minutes in glutaraldehyde and storage for up to 2 weeks. PMID:28680549

Impact of Intentional Overload on Joint Stability of Internal Implant-Abutment Connection System with Different Diameter.

PubMed

Lee, Ji-Hye; Lee, Won; Huh, Yoon-Hyuk; Park, Chan-Jin; Cho, Lee-Ra

2017-09-05

To evaluate the axial displacement of the implant-abutment assembly of different implant diameter after static and cyclic loading of overload condition. An internal conical connection system with three diameters (Ø 4.0, 4.5, and 5.0) applying identical abutment dimension and the same abutment screw was evaluated. Axial displacement of abutment and reverse torque loss of abutment screw were evaluated under static and cyclic loading conditions. Static loading test groups were subjected to vertical static loading of 250, 400, 500, 600, 700, and 800 N consecutively. Cyclic loading test groups were subjected to 500 N cyclic loading to evaluate the effect of excessive masticatory loading. After abutment screw tightening for 30 Ncm, axial displacement was measured upon 1, 3, 10, and 1,000,000 cyclic loadings of 500 N. Repeated-measure ANOVA and 2-way ANOVA were used for statistical analysis (α = 0.05). The increasing magnitude of vertical load and thinner wall thickness of implant increased axial displacement of abutment and reverse torque loss of abutment screw (p < 0.05). Implants in the Ø 5.0 diameter group demonstrated significantly low axial displacement, and reverse torque loss after static loading than Ø 4.0 and Ø 4.5 diameter groups (p < 0.05). In the cyclic loading test, all diameter groups of implant showed significant axial displacement after 1 cycle of loading of 500 N (p < 0.05). There was no significant axial displacement after 3, 10, or 1,000,000 cycles of loading (p = 0.603). Implants with Ø 5.0 diameter demonstrated significantly low axial displacement and reverse torque loss after the cyclic and static loading of overload condition. © 2017 by the American College of Prosthodontists.

Validation of Cardiovascular Parameters During NASA's Functional Task Test

NASA Technical Reports Server (NTRS)

Arzeno, N. M.; Stenger, M. B.; Bloomberg, J. J.; Platts, Steven H.

2008-01-01

Microgravity-induced physiological changes, including cardiovascular deconditioning may impair crewmembers f capabilities during exploration missions on the Moon and Mars. The Functional Task Test (FTT), which will be used to assess task performance in short and long duration astronauts, consists of 7 functional tests to evaluate crewmembers f ability to perform activities to be conducted in a partial-gravity environment or following an emergency landing on Earth. The Recovery from Fall/Stand Test (RFST) tests both the subject fs ability to get up from a prone position and orthostatic intolerance. PURPOSE: Crewmembers have never become presyncopal in the first 3 min of quiet stand, yet it is unknown whether 3 min is long enough to cause similar heart rate fluctuations to a 5-min stand. The purpose of this study was to validate and test the reliability of heart rate variability (HRV) analysis of a 3-min quiet stand. METHODS: To determine the validity of using 3 vs. 5-min of standing to assess HRV, 7 healthy subjects remained in a prone position for 2 min, stood up quickly and stood quietly for 6 min. ECG and continuous blood pressure data were recorded. Mean R-R interval and spectral HRV were measured in minutes 0-3 and 0-5 following the heart rate transient due to standing. Significant differences between the segments were determined by a paired t-test. To determine the reliability of the 3-min stand test, 13 healthy subjects completed 3 trials of the complete FTT on separate days, including the RFST with a 3-min stand test. Analysis of variance (ANOVA) was performed on the HRV measures. RESULTS: Spectral HRV measures reflecting autonomic activity were not different (p>0.05) during the 0-3 and 0-5 min segment (mean R-R interval: 738+/-74 ms, 728+/-69 ms; low frequency to high frequency ratio: 6.5+/-2.2, 7.7+/-2.7; normalized high frequency: 0.19+/-0.03, 0.18+/-0.04). The average coefficient of variation for mean R-R interval, systolic and diastolic blood pressures in the prone position and stand test were less than 8% for the test sessions. ANOVA results yielded a greater inter-subject variability (p.0.006) than inter-session variability (p>0.05) for HRV in the stand test. CONCLUSION: These studies show that a 3 minute stand delivers repeatable cardiovascular heart rate and BP data in the context of this larger series of tests such as the FTT.

Firefighters' cardiovascular health and fitness: An observation of adaptations that occur during firefighter training academies.

PubMed

Gnacinski, Stacy L; Ebersole, Kyle T; Cornell, David J; Mims, Jason; Zamzow, Aaron; Meyer, Barbara B

2016-03-09

Firefighters' cardiovascular fitness remains a foremost concern among fire departments and organizations, yet very little research has been conducted to examine the cardiovascular fitness adaptations that occur during firefighter training academies. To describe the cardiovascular adaptations observed among firefighter recruits during firefighter training academies using measures of estimated maximal oxygen uptake (VO2max) and heart rate recovery (ΔHR). Firefighter recruits (n = 41) enrolled in a 16-week firefighter training academy completed a 5-minute step test during the first, eighth, and sixteenth week of training. Repeated measures analysis of variance (RM ANOVA) calculations were conducted to determine changes in estimated VO2max and ΔHR. Results of the RM ANOVA calculations revealed that mean estimated VO2max and mean ΔHR differed significantly between time points: F(2, 80) = 75.525, p < 0.001, and F(2, 80) = 4.368, p = 0.016, respectively. No significant changes were observed in mean estimated VO2max and mean ΔHR beyond the eighth week of training. No significant relationship was identified between estimated VO2max and ΔHR. Although firefighter recruits' estimated VO2max and ΔHR change significantly over the course of the firefighter training academy, the measures may not be equal predictors of cardiovascular fitness.

MRI-determined liver proton density fat fraction, with MRS validation: Comparison of regions of interest sampling methods in patients with type 2 diabetes.

PubMed

Vu, Kim-Nhien; Gilbert, Guillaume; Chalut, Marianne; Chagnon, Miguel; Chartrand, Gabriel; Tang, An

2016-05-01

To assess the agreement between published magnetic resonance imaging (MRI)-based regions of interest (ROI) sampling methods using liver mean proton density fat fraction (PDFF) as the reference standard. This retrospective, internal review board-approved study was conducted in 35 patients with type 2 diabetes. Liver PDFF was measured by magnetic resonance spectroscopy (MRS) using a stimulated-echo acquisition mode sequence and MRI using a multiecho spoiled gradient-recalled echo sequence at 3.0T. ROI sampling methods reported in the literature were reproduced and liver mean PDFF obtained by whole-liver segmentation was used as the reference standard. Intraclass correlation coefficients (ICCs), Bland-Altman analysis, repeated-measures analysis of variance (ANOVA), and paired t-tests were performed. ICC between MRS and MRI-PDFF was 0.916. Bland-Altman analysis showed excellent intermethod agreement with a bias of -1.5 ± 2.8%. The repeated-measures ANOVA found no systematic variation of PDFF among the nine liver segments. The correlation between liver mean PDFF and ROI sampling methods was very good to excellent (0.873 to 0.975). Paired t-tests revealed significant differences (P < 0.05) with ROI sampling methods that exclusively or predominantly sampled the right lobe. Significant correlations with mean PDFF were found with sampling methods that included higher number of segments, total area equal or larger than 5 cm(2) , or sampled both lobes (P = 0.001, 0.023, and 0.002, respectively). MRI-PDFF quantification methods should sample each liver segment in both lobes and include a total surface area equal or larger than 5 cm(2) to provide a close estimate of the liver mean PDFF. © 2015 Wiley Periodicals, Inc.

Translucency of zirconia-based pressable ceramics with different core and veneer thicknesses.

PubMed

Jeong, Il-Do; Bae, So-Yeon; Kim, Dong-Yeon; Kim, Ji-Hwan; Kim, Woong-Chul

2016-06-01

Little information is available on the translucency of zirconia-based pressable ceramic restorations with a pressed ceramic veneer and zirconia core in various thickness combinations. The purpose of this in vitro study was to assess the translucency of 3 types of zirconia-based pressable ceramics for different core-veneer thickness combinations. A bilayered ceramic specimen was prepared with a pressable ceramic (IPS e.max Zirpress, Initial IQ, Rosetta UltraPress) veneer over a zirconia core (Zenostar Zr). Three groups of specimens (n=7) were formed with the following core+veneer thicknesses: 1 +0.5 mm, 0.7 +0.8 mm, and 0.5 +1 mm. To obtain consistent thickness and high translucency, all specimens were subjected to surface grinding with a grinding machine. To eliminate the effect of differences in roughness on the translucency, the surface roughness of the ground specimens was measured with a scanning profiler, and the consistency of these measured values was verified through statistical analysis. The luminous transmittance of the specimens was measured with a spectrophotometer. The effects of the pressable ceramic type and core-veneer thickness combination on transmittance were assessed using a 2-way ANOVA (α=.05). The consistency of the surface roughness among the tested specimens was confirmed using a 1-way ANOVA and the Tukey HSD post hoc test (P<.05). The luminous transmittance exhibited a statistically significant dependence on both the type of pressable ceramic and the core-veneer thickness combination (P<.05). The type of pressable ceramic and core-veneer thickness combination affected the translucency of the restoration. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Audit diabetes-dependent quality of life questionnaire: usefulness in diabetes self-management education in the Slovak population.

PubMed

Holmanová, Elena; Ziaková, Katarína

2009-05-01

This paper reports a study to test validity and internal consistency of the audit diabetes-dependent quality of life questionnaire in the Slovak population and to evaluate its usefulness in the context of education of people with diabetes. The individualised instruments designed to measure individuals' perceptions of the impact of diabetes on their quality of life may be helpful to identify individuals' preferences, motivational deficits in diabetes management and to tailor individual treatment strategies. Survey. After linguistic validation, the structure of the questionnaire was tested using factor analysis on 104 patients who were recruited from the National Institute of Endocrinology and Diabetology in Lubochna. Internal consistency was evaluated by computing Cronbach's alpha. Clinical variables related to the quality of life were analysed using one-way ANOVA, multifactor ANOVA, Pearson's and Spearman's rank correlation coefficients. A one-dimensional scale structure was supported and internal consistency was high (alpha = 0.93). Variance in impact of diabetes on quality of life was explained by age, presence of late complications and type of insulin regimen. The audit diabetes-dependent quality of life is culturally appropriate, valid and reliable in the sample of Slovak patients attending the educational programme. Our results agreed with previous European and Asian studies supporting its usefulness in the context of diabetes self-management education. Individualised diabetes-specific quality of life measures allow better understanding of patients' treatment preferences and, consequently, more effective prioritizing and targeting of appropriate educational interventions. This instrument may be useful in routine clinical practice and as an outcome measure for international clinical research trials evaluating effectiveness of educational programmes.

A study protocol for enriching the interprofessional collaborative competency attainment survey insights.

PubMed

Jackson, Jeffrey B

2017-11-01

The following short report outlines a proposed study designed to evaluate the Interprofessional Collaborative Competency Attainment Survey and its recommended method of administration. This exploratory study seeks to determine if there is a significant difference between two methods of administration, the recommended and validated retrospective pre-test and post-test, and a traditional pre-test and post-test. If a significant difference does exist, this data will provide a means to determine the effect size of that difference. The comparison will be done using repeated measure ANOVA and the subsequent effect size will be evaluated using Cohen's d. As the retrospective design is utilised to evaluate a change in perceived competency, comparison of data from a traditional pre-test with a retrospective pre-test may provide a means for evaluation of the participants' change in understanding of the construct, and thus a more thorough picture of the forces driving changes to scores.

Two Methods of Automatic Evaluation of Speech Signal Enhancement Recorded in the Open-Air MRI Environment

NASA Astrophysics Data System (ADS)

Přibil, Jiří; Přibilová, Anna; Frollo, Ivan

2017-12-01

The paper focuses on two methods of evaluation of successfulness of speech signal enhancement recorded in the open-air magnetic resonance imager during phonation for the 3D human vocal tract modeling. The first approach enables to obtain a comparison based on statistical analysis by ANOVA and hypothesis tests. The second method is based on classification by Gaussian mixture models (GMM). The performed experiments have confirmed that the proposed ANOVA and GMM classifiers for automatic evaluation of the speech quality are functional and produce fully comparable results with the standard evaluation based on the listening test method.

The values of intrapleural pressure before the removal of chest tube in non-complicated pulmonary lobectomies.

PubMed

Refai, Majed; Brunelli, Alessandro; Varela, Gonzalo; Novoa, Nuria; Pompili, Cecilia; Jimenez, Marcelo F; Aranda, José Luis; Sabbatini, Armando

2012-04-01

Digitalized chest drainage systems allow for quantification of air leak and measurement of intrapleural pressure. Little is known about the value of intrapleural pressure during the postoperative phase and its role in the recovering process after pulmonary resection. The objective of this investigation was to measure the values of pleural pressure immediately before the removal of chest tube after different types of pulmonary lobectomy. Prospective observational analysis on 203 consecutive patients submitted to pulmonary lobectomy during a 12-month period at two centres. Multiple measurements were recorded in the last hour before the removal of chest tube and averaged for the analysis. All patients were seated in bed in a 45° up-right position or in a chair, had a single chest tube and were not connected to suction during the evaluation period. Analysis of variance (ANOVA) was used to assess the differences in pleural pressure between different types of lobectomies. The average maximum, minimum and differential pressures were -6.1, -19.5 and 13.3 cmH(2)O, respectively. The average pressures were similar in all types of lobectomies (ANOVA, P = 0.2) and ranged from -11 to -13 cmH(2)O, with the exception of right upper bilobectomy (-20 cmH(2)O, all P-values vs. other types of lobectomies <0.05). Similar values were also recorded for maximum pressures (range -4.4 to -8.4 cmH(2)O) and minimum pressures (-31.6 cmH(2)O vs. ranged from -15.4 to -20.5 cmH(2)O, all P-values <0.01). The average pleural pressure was not associated with FEV1 (P = 0.9), DLCO (P = 0.2) or FEV1/FVC ratio (P = 0.6), when tested with linear regression. Similarly, the average pleural pressure was similar in patients with and without COPD (-12.1 vs. -13.0 cmH(2)O, P = 0.4). The ANOVA test was used to assess differences in pressures between different lobectomies. The so-called water seal status may actually correspond to intrapleural pressures ranging from -13 to -20 cmH(2)O. Modern electronic chest drainage devices allow a stable control of the intrapleural pressure. Thus, the values found in this study may be used as target pressures for different types of lobectomies, in order to favour lung recovery after surgery.

The prevalence of implementation of mental health measures in companies and its association with sickness absence.

PubMed

Pas, L Willemijn; Boot, Cécile R L; van der Beek, Allard J; Proper, Karin I

2016-03-01

The main objective was to determine the prevalence of implementation of mental health measures aimed at the prevention of high workload (workload measures) and the promotion of work engagement (engagement measures) in companies and sectors. Additionally, its associations with sickness absence was explored. Cross-sectional survey. An internet-based survey among 12,894 company representatives in the Netherlands. Descriptive analyses were performed to determine the prevalence, and differences between sectors were tested using Chi-squared tests. ANOVA was performed to examine the association between companies with or without mental health measures and sickness absence rates. 32.8% and 21.7% of the companies reported to have implemented 'continuously or often' workload measures and engagement measures, respectively. The sectors 'health care and welfare' and 'education' reported to have implemented measures most often. Having implemented engagement measures was significantly associated with lower sickness absence (4.1% vs 4.5%). Overall, workload measures were more often implemented than engagement measures. Future research is recommended to determine reasons for implementation as well as causality in the association between mental health measures and sickness absence. Copyright © 2015. Published by Elsevier Ltd.

Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods

PubMed Central

Digholkar, Shruti; Madhav, V. N. V.; Palaskar, Jayant

2016-01-01

Purpose: The purpose of this study was to evaluate and compare the flexural strength and microhardness of provisional restorative materials fabricated utilizing rapid prototyping (RP), Computer Assisted Designing and Computer Assisted Milling (CAD-CAM) and conventional method. Materials and Methods: Twenty specimens of dimensions 25 mm × 2 mm × 2 mm (ADA-ANSI specification #27) were fabricated each using: (1) Three dimensional (3D) printed light-cured micro-hybrid filled composite by RP resin group, (2) a milled polymethyl methacrylate (CH) using CAD-CAM (CC resin group), and (3) a conventionally fabricated heat activated polymerized CH resin group. Flexural strength and microhardness were measured and values obtained were evaluated. Results: The measured mean flexural strength values (MegaPascals) were 79.54 (RP resin group), 104.20 (CC resin group), and 95.58 (CH resin group). The measured mean microhardness values (Knoop hardness number) were 32.77 (RP resin group), 25.33 (CC resin group), and 27.36 (CH resin group). The analysis of variance (ANOVA) test shows that there is statistically significant difference in the flexural strength values of the three groups (P < 0.05). According to the pairwise comparison of Tukey's honest significant difference (HSD) test, flexural strength values of CC resin group and CH resin group were higher and statistically significant than those of the RP resin group (P < 0.05). However, there was no significant difference between flexural strength values of CC resin and CH resin group (P = 0.64). The difference in microhardness values of the three groups was statistically significant according to ANOVA as well as the intergroup comparison done using the Tukey's HSD (post hoc) test (P < 0.05). Conclusions: CC-based CH had the highest flexural strength whereas RP-based 3D printed and light cured micro-hybrid filled composite had the highest microhardness. PMID:27746595

Efficacy of Miswak toothpaste and mouthwash on cariogenic bacteria

PubMed Central

Al-Dabbagh, Samim A.; Qasim, Huda J.; Al-Derzi, Nadia A.

2016-01-01

Objectives: To evaluate the efficacy of Salvadora persica (Miswak) products on cariogenic bacteria in comparison with ordinary toothpaste. Methods: The study was conducted in Zakho city, Kurdistan region, Iraq during the period from October 2013 to January 2014. A randomized controlled clinical trial of 40 students randomly allocated into 4 groups. They were instructed to use Mismark toothpaste, Miswak mouthwash, and ordinary toothpaste with water or with normal saline. Salivary samples were collected at 3-time intervals: before, immediately after use, and after 2 weeks of use. The effect of each method on Streptococcus mutans and Lactobacilli was evaluated by using caries risk test. Results: One-way repeated measure analysis of variance (ANOVA), one-way ANOVA, and least significant difference tests were used. Miswak wash has a significant reduction effect on both bacteria immediately and after 2 weeks of use. Miswak paste has a similar effect on Lactobacilli, while Streptococcus mutans showed a significant decrease only after 2 weeks of use. Ordinary paste showed a non significant effect on both bacteria at both time intervals; while the addition of normal saline showed a significant effect on both bacteria only after 2 weeks of use. Conclusion: Miswak products, especially mouth wash, were more effective in reducing the growth of cariogenic bacteria than ordinary toothpaste. PMID:27570858

Effectiveness of Massage Therapy and Abdominal Hypopressive Gymnastics in Nonspecific Chronic Low Back Pain: A Randomized Controlled Pilot Study

PubMed Central

Jiménez-Rejano, J. J.; Chillón-Martínez, R.; Gómez-Benítez, M. A.; De-La-Casa-Almeida, M.

2018-01-01

Background There are a great number of interventions in physiotherapy, but with little evidence of their effectiveness in chronic low back pain. Therefore, this study assesses effectiveness of Massage Therapy and Abdominal Hypopressive Gymnastics and the combination of both to decrease pain and lumbar disability while increasing joint mobility and quality of life in patients with chronic nonspecific low back pain. Methods A randomized, single-blinded, controlled, clinical trial with sample (n = 27) was comprised of patients between 20 and 65 years, diagnosed with pain of mechanical origin characterized by having a duration of at least 12 weeks and no serious complications. Each group received 8 interventions of 30 minutes. Results Friedman ANOVA test obtained statistically significant differences of Oswestry, NRS, and Schober variables (p < 0.05) in the three measurements (pretest, posttest 1, and posttest 2), in each individual group. ANOVA Kruskal-Wallis test was used for comparison between groups, and Oswestry Disability values were significantly higher (p = 0.024) in the group receiving both treatments. Conclusion Both individual groups reduce pain levels, improve disability, and increase the flexibility of the lumbar spine. The combination therapy provides greater benefits in terms of lumbar disability. This study is registered on March 8, 2016, with NCT02721914. PMID:29681973

Impact of bleaching agents on water sorption and solubility of resin luting cements.

PubMed

Torabi Ardakani, Mahshid; Atashkar, Berivan; Bagheri, Rafat; Burrow, Michael F

2017-08-01

The aim of the present study was to evaluate the effect of distilled water and home and office bleaching agents on the sorption and solubility of resin luting cements. A total of 18 disc-shaped specimens were prepared from each of four resin cements: G-CEM LinkAce, Panavia F, Rely X Unicem, and seT. Specimens were cured according to the manufacturers' instructions and randomly divided into three groups of six, where they were treated with either an office or home bleaching agent or immersed in distilled water (control). Water sorption and solubility were measured by weighing the specimens before and after immersion and desiccation. Data were analyzed using Pearson correlation coefficient, two-way analysis of variance (ANOVA) and Tukey's test. There was a significant, positive correlation between sorption and solubility. Two-way anova showed significant differences among all resin cements tested for either sorption or solubility. Water sorption and solubility of all cements were affected significantly by office bleaching, and even more by home bleaching agents. Sorption and solubility behavior of the studied cements were highly correlated and significantly affected by applying either office or home bleaching agents; seT showed the highest sorption and solubility, whereas Rely X Unicem revealed the lowest. © 2016 John Wiley & Sons Australia, Ltd.

Alterations in post-movement beta event related synchronization throughout the migraine cycle: A controlled, longitudinal study.

PubMed

Mykland, Martin Syvertsen; Bjørk, Marte Helene; Stjern, Marit; Sand, Trond

2018-04-01

Background The migraine brain is believed to have altered cortical excitability compared to controls and between migraine cycle phases. Our aim was to evaluate post-activation excitability through post-movement beta event related synchronization (PMBS) in sensorimotor cortices with and without sensory discrimination. Subjects and methods We recorded EEG of 41 migraine patients and 31 healthy controls on three different days with classification of days in relation to migraine phases. During each recording, subjects performed one motor and one sensorimotor task with the right wrist. Controls and migraine patients in the interictal phase were compared with repeated measures (R-) ANOVA and two sample Student's t-test. Migraine phases were compared to the interictal phase with R-ANOVA and paired Student's t-test. Results The difference between PMBS at the contralateral and ipsilateral sensorimotor cortex was altered throughout the migraine cycle. Compared to the interictal phase, we found decreased PMBS at the ipsilateral sensorimotor cortex in the ictal phase and increased PMBS in the preictal phase. Lower ictal PMBS was found in bilateral sensorimotor cortices in patients with right side headache predominance. Conclusion The cyclic changes of PMBS in migraine patients may indicate that a dysfunction in deactivation and interhemispheric inhibition of the sensorimotor cortex is involved in the migraine attack cascade.

Effectiveness of Massage Therapy and Abdominal Hypopressive Gymnastics in Nonspecific Chronic Low Back Pain: A Randomized Controlled Pilot Study.

PubMed

Bellido-Fernández, L; Jiménez-Rejano, J J; Chillón-Martínez, R; Gómez-Benítez, M A; De-La-Casa-Almeida, M; Rebollo-Salas, M

2018-01-01

There are a great number of interventions in physiotherapy, but with little evidence of their effectiveness in chronic low back pain. Therefore, this study assesses effectiveness of Massage Therapy and Abdominal Hypopressive Gymnastics and the combination of both to decrease pain and lumbar disability while increasing joint mobility and quality of life in patients with chronic nonspecific low back pain. A randomized, single-blinded, controlled, clinical trial with sample ( n = 27) was comprised of patients between 20 and 65 years, diagnosed with pain of mechanical origin characterized by having a duration of at least 12 weeks and no serious complications. Each group received 8 interventions of 30 minutes. Friedman ANOVA test obtained statistically significant differences of Oswestry, NRS, and Schober variables ( p < 0.05) in the three measurements (pretest, posttest 1, and posttest 2), in each individual group. ANOVA Kruskal-Wallis test was used for comparison between groups, and Oswestry Disability values were significantly higher ( p = 0.024) in the group receiving both treatments. Both individual groups reduce pain levels, improve disability, and increase the flexibility of the lumbar spine. The combination therapy provides greater benefits in terms of lumbar disability. This study is registered on March 8, 2016, with NCT02721914.

Analysis of Resin-Dentin Interface Morphology and Bond Strength Evaluation of Core Materials for One Stage Post-Endodontic Restorations

PubMed Central

Bitter, Kerstin; Gläser, Christin; Neumann, Konrad; Blunck, Uwe; Frankenberger, Roland

2014-01-01

Purpose Restoration of endodontically treated teeth using fiber posts in a one-stage procedure gains more popularity and aims to create a secondary monoblock. Data of detailed analyses of so called “post-and-core-systems” with respect to morphological characteristics of the resin-dentin interface in combination with bond strength measurements of fiber posts luted with these materials are scarce. The present study aimed to analyze four different post-and-core-systems with two different adhesive approaches (self-etch and etch-and-rinse). Materials and Methods Human anterior teeth (n = 80) were endodontically treated and post space preparations and post placement were performed using the following systems: Rebilda Post/Rebilda DC/Futurabond DC (Voco) (RB), Luxapost/Luxacore Z/Luxabond Prebond and Luxabond A+B (DMG) (LC), X Post/Core X Flow/XP Bond and Self Cure Activator (Dentsply DeTrey) (CX), FRC Postec/MultiCore Flow/AdheSE DC (Ivoclar Vivadent) (MC). Adhesive systems and core materials of 10 specimens per group were labeled using fluorescent dyes and resin-dentin interfaces were analyzed using Confocal Laser Scanning Microscopy (CLSM). Bond strengths were evaluated using a push-out test. Data were analyzed using repeated measurement ANOVA and following post-hoc test. Results CLSM analyses revealed significant differences between groups with respect to the factors hybrid layer thickness (p<0.0005) and number of resin tags (p = 0.02; ANOVA). Bond strength was significantly affected by core material (p = 0.001), location inside the root canal (p<0.0005) and incorporation of fluorescent dyes (p = 0.036; ANOVA). CX [7.7 (4.4) MPa] demonstrated significantly lower bond strength compared to LC [14.2 (8.7) MPa] and RB [13.3 (3.7) MPa] (p<0.05; Tukey HSD) but did not differ significantly from MC [11.5 (3.5) MPa]. Conclusion It can be concluded that bond strengths inside the root canal were not affected by the adhesive approach of the post-and-core-system. All systems demonstrated homogenous hybrid layer formation and penetration into the dentinal tubules in spite of the complicating conditions for adhesion inside the root canal. PMID:24586248

Effect of in-office bleaching agents on physical properties of dental composite resins.

PubMed

Mourouzis, Petros; Koulaouzidou, Elisabeth A; Helvatjoglu-Antoniades, Maria

2013-04-01

The physical properties of dental restorative materials have a crucial effect on the longevity of restorations and moreover on the esthetic demands of patients, but they may be compromised by bleaching treatments. The purpose of this study was to evaluate the effects of in-office bleaching agents on the physical properties of three composite resin restorative materials. The bleaching agents used were hydrogen peroxide and carbamide peroxide at high concentrations. Specimens of each material were prepared, cured, and polished. Measurements of color difference, microhardness, and surface roughness were recorded before and after bleaching and data were examined statistically by analysis of variance (ANOVA) and Tukey HSD post-hoc test at P < .05. The measurements showed that hue and chroma of silorane-based composite resin altered after the bleaching procedure (P < .05). No statistically significant differences were found when testing the microhardness and surface roughness of composite resins tested (P > .05). The silorane-based composite resin tested showed some color alteration after bleaching procedures. The bleaching procedure did not alter the microhardness and the surface roughness of all composite resins tested.

The Impact of Brain Breaks Classroom-Based Physical Activities on Attitudes toward Physical Activity in Polish School Children in Third to Fifth Grade.

PubMed

Glapa, Agata; Grzesiak, Joanna; Laudanska-Krzeminska, Ida; Chin, Ming-Kai; Edginton, Christopher R; Mok, Magdalena Mo Ching; Bronikowski, Michal

2018-02-21

The purpose of this study was to examine the effectiveness of the Brain Breaks® Physical Activity Solutions in changing attitudes toward physical activity of school children in a community in Poland. In 2015, a sample of 326 pupils aged 9-11 years old from 19 classes at three selected primary schools were randomly assigned to control and experimental groups within the study. During the classes, children in the experimental group performed physical activities two times per day in three to five minutes using Brain Breaks® videos for four months, while the control group did not use the videos during the test period. Students' attitudes toward physical activities were assessed before and after the intervention using the "Attitudes toward Physical Activity Scale". Repeated measures of ANOVA were used to examine the change from pre- to post-intervention. Overall, a repeated measures ANOVA indicated time-by-group interaction effects in 'Self-efficacy on learning with video exercises', F(1.32) = 75.28, p = 0.00, η2 = 0.19. Although the changes are minor, there were benefits of the intervention. It may be concluded that HOPSports Brain Breaks® Physical Activity Program contributes to better self-efficacy on learning while using video exercise of primary school children.

Friction Forces during Sliding of Various Brackets for Malaligned Teeth: An In Vitro Study

PubMed Central

Crincoli, Vito; Di Bisceglie, Maria Beatrice; Balsamo, Antonio; Serpico, Vitaliano; Chiatante, Francesco; Pappalettere, Carmine; Boccaccio, Antonio

2013-01-01

Aims. To measure the friction force generated during sliding mechanics with conventional, self-ligating (Damon 3 mx, Smart Clip, and Time 3) and low-friction (Synergy) brackets using different archwire diameters and ligating systems in the presence of apical and buccal malalignments of the canine. Methods. An experimental setup reproducing the right buccal segment of the maxillary arch was designed to measure the friction force generated at the bracket/wire and wire/ligature interfaces of different brackets. A complete factorial plan was drawn up and a three-way analysis of variance (ANOVA) was carried out to investigate whether the following factors affect the values of friction force: (i) degree of malalignment, (ii) diameter of the orthodontic wire, and (iii) bracket/ligature combination. Tukey post hoc test was also conducted to evaluate any statistically significant differences between the bracket/ligature combinations analyzed. Results. ANOVA showed that all the above factors affect the friction force values. The friction force released during sliding mechanics with conventional brackets is about 5-6times higher than that released with the other investigated brackets. A quasilinear increase of the frictional forces was observed for increasing amounts of apical and buccal malalignments. Conclusion. The Synergy bracket with silicone ligature placed around the inner tie-wings appears to yield the best performance. PMID:23533364

The heart rate response to nintendo wii boxing in young adults.

PubMed

Bosch, Pamela R; Poloni, Joseph; Thornton, Andrew; Lynskey, James V

2012-06-01

To determine if 30 minutes of Nintendo Wii Sports boxing provides cardiorespiratory benefits and contributes to the daily exercise recommendations for healthy young adults. Twenty healthy 23- to 27-year-olds participated in two sessions to measure maximum heart rate (HR(max)) via a treadmill test and heart rate (HR) response to 30 minutes of Wii Sports boxing. Heart rate in beats per minute (bpm) was measured continuously, and exercise intensity during each minute of play was stratified as a percentage of HR(max). Mixed designs analysis of variance (ANOVA) and Pearson product moment correlations were used to analyze the data. Mean (SD) HR response to boxing was 143 (15) bpm or 77.5% (10.0%) of HR(max). The mean HR response for experienced participants was significantly lower than inexperienced participants, P = .007. The ANOVA revealed a significant interaction between experience and time spent at various intensities, P = .009. Experienced participants spent more time in light to vigorous intensities, inexperienced participants in moderate to very hard intensities. Fitness was not correlated with mean HR response to boxing, P = .49. Thirty minutes of Nintendo Wii Sports boxing provides a moderate to vigorous aerobic response in healthy young adults and can contribute to daily recommendations for physical activity.

The Heart Rate Response to Nintendo Wii Boxing in Young Adults

PubMed Central

Bosch, Pamela R.; Poloni, Joseph; Thornton, Andrew; Lynskey, James V.

2012-01-01

Purpose To determine if 30 minutes of Nintendo Wii Sports boxing provides cardiorespiratory benefits and contributes to the daily exercise recommendations for healthy young adults. Methods Twenty healthy 23- to 27-year-olds participated in two sessions to measure maximum heart rate (HRmax) via a treadmill test and heart rate (HR) response to 30 minutes of Wii Sports boxing. Heart rate in beats per minute (bpm) was measured continuously, and exercise intensity during each minute of play was stratified as a percentage of HRmax. Mixed designs analysis of variance (ANOVA) and Pearson product moment correlations were used to analyze the data. Results Mean (SD) HR response to boxing was 143 (15) bpm or 77.5% (10.0%) of HRmax. The mean HR response for experienced participants was significantly lower than inexperienced participants, P = .007. The ANOVA revealed a significant interaction between experience and time spent at various intensities, P = .009. Experienced participants spent more time in light to vigorous intensities, inexperienced participants in moderate to very hard intensities. Fitness was not correlated with mean HR response to boxing, P = .49. Conclusion Thirty minutes of Nintendo Wii Sports boxing provides a moderate to vigorous aerobic response in healthy young adults and can contribute to daily recommendations for physical activity. PMID:22833705

Promising hypotensive effect of hawthorn extract: a randomized double-blind pilot study of mild, essential hypertension.

PubMed

Walker, Ann F; Marakis, Georgios; Morris, Andrew P; Robinson, Paul A

2002-02-01

This pilot study was aimed at investigating the hypotensive potential of hawthorn extract and magnesium dietary supplements individually and in combination, compared with a placebo. Thirty-six mildly hypertensive subjects completed the study. At baseline, anthropometric and dietary assessment, as well as blood pressure measurements were taken at rest, after exercise and after a computer 'stress' test. Volunteers were then randomly assigned to a daily supplement for 10 weeks of either: (a) 600 mg Mg, (b) 500 mg hawthorn extract, (c) a combination of (a) and (b), (d) placebo. Measurements were repeated at 5 and 10 weeks of intervention. There was a decline in both systolic and diastolic blood pressure in all treatment groups, including placebo, but ANOVA provided no evidence of difference between treatments. However, factorial contrast analysis in ANOVA showed a promising reduction (p = 0.081) in the resting diastolic blood pressure at week 10 in the 19 subjects who were assigned to the hawthorn extract, compared with the other groups. Furthermore, a trend towards a reduction in anxiety (p = 0.094) was also observed in those taking hawthorn compared with the other groups. These findings warrant further study, particularly in view of the low dose of hawthorn extract used. Copyright 2002 John Wiley & Sons, Ltd.

Characterization of GAB1 Expression Over the Menstrual Cycle in Women With and Without Polycystic Ovarian Syndrome Provides a New Insight Into Its Pathophysiology

PubMed Central

Roemer, K. L.; Young, S. L.

2014-01-01

Context: In a previous microarray analysis, GRB2-associated binding protein 1 (GAB1), a docking protein closely related to the insulin receptor substrate, was down-regulated in endometrium of women with polycystic ovary syndrome (PCOS). Objective: The objective of the study was to characterize the cyclic expression of endometrial GAB1 in vivo in normal women and those with PCOS as well as investigate the possible mechanisms of endometrial regulation of GAB1 expression and action in vitro. Design: This was an experimental and case-control study. Setting: The study was conducted at a tertiary university hospital. Patients: Normal proven fertile women (controls; n = 31) and women with PCOS (cases; n = 26) participated in the study. Interventions: Interventions included timed endometrial biopsies at different phases of the menstrual cycle. Ishikawa cells were cultured with β-estradiol (E2), medroxyprogesterone acetate, and E2 + medroxyprogesterone acetate. Transfection of small interfering RNA for GAB1 in Ishikawa cells incubated with or without insulin. Main Outcome Measures: GAB1 mRNA expression in Ishikawa cells and in endometrium of cases and controls was measured. Protein expression of phosphorylated MAPK by Western blot was also measured. Immunohistochemical localization and expression of phosphorylated GAB1 in endometrium was also measured, using a digital histological score. Results: In endometrial tissue, GAB1 mRNA was reduced in the proliferative phase of PCOS women, compared with controls (P = .003; ANOVA). When all the phases of the menstrual cycle were grouped, GAB1 protein expression was reduced in endometrium of PCOS women (P < .0001; Student t test). E2 increases GAB1 mRNA expression in Ishikawa cells (P = .001; ANOVA). Phosphorylated MAPK is reduced in cells transfected with small interfering RNA for GAB1 (P = .008; ANOVA) and incubated with insulin. Conclusions: GAB1 mRNA expression is positively modulated by E2. Endometrial GAB1 protein and mRNA expression are reduced in women with PCOS, suggesting that the endometrium of PCOS women have a defect in insulin signaling due to GAB1 down-regulation. PMID:25144631

Mechanical and Morphological Effect of Plant Based Antimicrobial Solutions on Maxillofacial Silicone Elastomer.

PubMed

Tetteh, Sophia; Bibb, Richard J; Martin, Simon J

2018-05-30

The objective of this study was to determine the effect of plant based antimicrobial solutions specifically tea tree and Manuka oil on facial silicone elastomers. The purpose of this in vitro study was to evaluate the effect of disinfection with plant extract solution on mechanical properties and morphology on the silicone elastomer. Test specimens were subjected to disinfection using tea tree oil, Manuka oil and the staphylococcus epidermidis bacteria. Furthermore, a procedure duration was used in the disinfection process to simulate up to one year of usage. Over 500 test specimens were fabricated for all tests performed namely hardness, elongation, tensile, tear strength tests, visual inspection and lastly surface characterization using SEM. A repeated measures ANOVA revealed that hardness and elongation at break varied significantly over the time period, whereas this was not observed in the tear and tensile strength parameters of the test samples.

The development of the "Cantonese receptive vocabulary test' for children aged 2-6 in Hong Kong.

PubMed

Cheung, P S; Lee, K Y; Lee, L W

1997-01-01

The study aims to develop a Cantonese receptive vocabulary test to assess 2-6-year-old children in Hong Kong. The test consists of 100 test items. Each target item is accompanied by a phonological distractor, a semantic distractor and an unrelated distractor. A sample of 609 normal children from four Maternal and Child Health Centres and nine kindergartens was selected. The results show that there is a significant effect of age on the correct score. ANOVA was performed to look at the age effect on each distractor individually. It was found that the scores of the three distractors decrease in their own patterns as age increases. With strong content validity, strong construct validity and high correlation coefficients in the split-half reliability, this test could be used as a reliable measurement for the Cantonese-speaking population in Hong Kong.

Violation of the Sphericity Assumption and Its Effect on Type-I Error Rates in Repeated Measures ANOVA and Multi-Level Linear Models (MLM).

PubMed

Haverkamp, Nicolas; Beauducel, André

2017-01-01

We investigated the effects of violations of the sphericity assumption on Type I error rates for different methodical approaches of repeated measures analysis using a simulation approach. In contrast to previous simulation studies on this topic, up to nine measurement occasions were considered. Effects of the level of inter-correlations between measurement occasions on Type I error rates were considered for the first time. Two populations with non-violation of the sphericity assumption, one with uncorrelated measurement occasions and one with moderately correlated measurement occasions, were generated. One population with violation of the sphericity assumption combines uncorrelated with highly correlated measurement occasions. A second population with violation of the sphericity assumption combines moderately correlated and highly correlated measurement occasions. From these four populations without any between-group effect or within-subject effect 5,000 random samples were drawn. Finally, the mean Type I error rates for Multilevel linear models (MLM) with an unstructured covariance matrix (MLM-UN), MLM with compound-symmetry (MLM-CS) and for repeated measures analysis of variance (rANOVA) models (without correction, with Greenhouse-Geisser-correction, and Huynh-Feldt-correction) were computed. To examine the effect of both the sample size and the number of measurement occasions, sample sizes of n = 20, 40, 60, 80, and 100 were considered as well as measurement occasions of m = 3, 6, and 9. With respect to rANOVA, the results plead for a use of rANOVA with Huynh-Feldt-correction, especially when the sphericity assumption is violated, the sample size is rather small and the number of measurement occasions is large. For MLM-UN, the results illustrate a massive progressive bias for small sample sizes ( n = 20) and m = 6 or more measurement occasions. This effect could not be found in previous simulation studies with a smaller number of measurement occasions. The proportionality of bias and number of measurement occasions should be considered when MLM-UN is used. The good news is that this proportionality can be compensated by means of large sample sizes. Accordingly, MLM-UN can be recommended even for small sample sizes for about three measurement occasions and for large sample sizes for about nine measurement occasions.

Assessment of factors influencing morale in the elderly.

PubMed

Loke, Seng Cheong; Abdullah, Siti S; Chai, Sen Tyng; Hamid, Tengku A; Yahaya, Nurizan

2011-01-25

We examined the relationship between morale measured by the Philadelphia Geriatric Morale Scale (PGC) and disability, social support, religiosity, and personality traits. Instruments predicting morale were then tested against PGC domains. The study utilized a cross-sectional survey with a multistage cluster sampling design. Instruments used were disability (disease burden; WHO Disability Score-II, WHODAS-II), social support (Duke Social Support Scale, DUSOCS; Lubben Social Network Scale, LSNS-6; Medical Outcomes Study Social Support Survey, MOS-SSS), religiosity (Revised Intrinsic-Extrinsic Religious Orientation Scale, I/E-R), and personality (Ten-Item Personality Inventory, TIPI). These were plotted as bar charts against PGC, resolved with one-way ANOVA and Kruskal-Wallis tests, then corrected for multiple comparisons. This process was repeated with PGC domains. Contribution of factors was modeled using population attributable risk (PAR) and odds ratios. Effect of confounders such as gender, age, and ethnicity were checked using binary logistic regression. All instruments showed clear relationships with PGC, with WHODAS-II and DUSOCS performing well (ANOVA p<0.001). For PGC domains, attitude toward aging and lonely dissatisfaction trended together, while agitation did not. PAR, odds ratios, and Exp(β) were disability (WHODAS-II: 28.5%, 3.8, 2.8), social support (DUSOCS: 28.0%, 3.4, 2.2), religiosity (I/E-R: 21.6%, 3.2, 2.1), and personality (TIPI: 27.9%, 3.6, 2.4). Combined PAR was 70.9%. Disability, social support, religiosity, and personality strongly influence morale in the elderly. WHODAS-II and DUSOCS perform best in measuring disability and social support respectively.

Effect of disposable infection control barriers on light output from dental curing lights.

PubMed

Scott, Barbara A; Felix, Corey A; Price, Richard B T

2004-02-01

To prevent contamination of the light guide on a dental curing light, barriers such as disposable plastic wrap or covers may be used. This study compared the effect of 3 disposable barriers on the spectral output and power density from a curing light. The hypothesis was that none of the barriers would have a significant clinical effect on the spectral output or the power density from the curing light. Three disposable barriers were tested against a control (no barrier). The spectra and power from the curing light were measured with a spectrometer attached to an integrating sphere. The measurements were repeated on 10 separate occasions in a random sequence for each barrier. Analysis of variance (ANOVA) followed by Fisher's protected least significant difference test showed that the power density was significantly less than control (by 2.4% to 6.1%) when 2 commercially available disposable barriers were used (p < 0.05). There was no significant difference in the power density when general-purpose plastic wrap was used (p > 0.05). The effect of each of the barriers on the power output was small and probably clinically insignificant. ANOVA comparisons of mean peak wavelength values indicated that none of the barriers produced a significant shift in the spectral output relative to the control ( p > 0.05). Two of the 3 disposable barriers produced a significant reduction in power density from the curing light. This drop in power was small and would probably not adversely affect the curing of composite resin. None of the barriers acted as light filters.

Microleakage in conservative cavities varying the preparation method and surface treatment

PubMed Central

ATOUI, Juliana Abdallah; CHINELATTI, Michelle Alexandra; PALMA-DIBB, Regina Guenka; CORONA, Silmara Aparecida Milori

2010-01-01

Objective To assess microleakage in conservative class V cavities prepared with aluminum-oxide air abrasion or turbine and restored with self-etching or etch-and-rinse adhesive systems. Material and Methods Forty premolars were randomly assigned to 4 groups (I and II: air abrasion; III and IV: turbine) and class V cavities were prepared on the buccal surfaces. Conditioning approaches were: groups I/III - 37% phosphoric acid; groups II/IV -self-priming etchant (Tyrian-SPe). Cavities were restored with One Step Plus/Filtek Z250. After finishing, specimens were thermocycled, immersed in 50% silver nitrate, and serially sectioned. Microleakage at the occlusal and cervical interfaces was measured in mm and calculated by a software. Data were subjected to ANOVA and Tukey’s test (α=0.05). Results Forty premolars were randomly assigned to 4 groups (I and II: air abrasion; III and IV: turbine) and class V cavities were prepared on the buccal surfaces. Conditioning approaches were: groups I/III - 37% phosphoric acid; groups II/IV -self-priming etchant (Tyrian-SPe). Cavities were restored with One Step Plus/Filtek Z250. After finishing, specimens were thermocycled, immersed in 50% silver nitrate, and serially sectioned. Microleakage at the occlusal and cervical interfaces was measured in mm and calculated by a software. Data were subjected to ANOVA and Tukey’s test (α=0.05). Conclusion Marginal seal of cavities prepared with aluminum-oxide air abrasion was different from that of conventionally prepared cavities, and the etch-and-rinse system promoted higher marginal seal at both enamel and dentin margins. PMID:20835580

Assessment of Factors Influencing Morale in the Elderly

PubMed Central

Loke, Seng Cheong; Abdullah, Siti S.; Chai, Sen Tyng; Hamid, Tengku A.; Yahaya, Nurizan

2011-01-01

Background We examined the relationship between morale measured by the Philadelphia Geriatric Morale Scale (PGC) and disability, social support, religiosity, and personality traits. Instruments predicting morale were then tested against PGC domains. Methods The study utilized a cross-sectional survey with a multistage cluster sampling design. Instruments used were disability (disease burden; WHO Disability Score-II, WHODAS-II), social support (Duke Social Support Scale, DUSOCS; Lubben Social Network Scale, LSNS-6; Medical Outcomes Study Social Support Survey, MOS-SSS), religiosity (Revised Intrinsic-Extrinsic Religious Orientation Scale, I/E-R), and personality (Ten-Item Personality Inventory, TIPI). These were plotted as bar charts against PGC, resolved with one-way ANOVA and Kruskal-Wallis tests, then corrected for multiple comparisons. This process was repeated with PGC domains. Contribution of factors was modeled using population attributable risk (PAR) and odds ratios. Effect of confounders such as gender, age, and ethnicity were checked using binary logistic regression. Results All instruments showed clear relationships with PGC, with WHODAS-II and DUSOCS performing well (ANOVA p<0.001). For PGC domains, attitude toward aging and lonely dissatisfaction trended together, while agitation did not. PAR, odds ratios, and Exp(β) were disability (WHODAS-II: 28.5%, 3.8, 2.8), social support (DUSOCS: 28.0%, 3.4, 2.2), religiosity (I/E-R: 21.6%, 3.2, 2.1), and personality (TIPI: 27.9%, 3.6, 2.4). Combined PAR was 70.9%. Conclusions Disability, social support, religiosity, and personality strongly influence morale in the elderly. WHODAS-II and DUSOCS perform best in measuring disability and social support respectively. PMID:21283551

Pregabalin reduces acute inflammatory and persistent pain associated with nerve injury and cancer in rat models of orofacial pain.

PubMed

Hummig, Wagner; Kopruszinski, Caroline Machado; Chichorro, Juliana Geremias

2014-01-01

To assess the analgesic effect of pregabalin in orofacial models of acute inflammatory pain and of persistent pain associated with nerve injury and cancer, and so determine its effectiveness in controlling orofacial pains having different underlying mechanisms. Orofacial capsaicin and formalin tests were employed in male Wistar rats to assess the influence of pregabalin (or vehicle) pretreatment in acute pain models, and the results from these experiments were analyzed by one-way analysis of variance (ANOVA) followed by Newman Keuls post-hoc test. Pregabalin (or vehicle) treatment was also tested on the facial heat hyperalgesia that was evaluated in rats receiving injection of the inflammatory irritant carrageenan into the upper lip, as well as after constriction of the infraorbital nerve (a model of trigeminal neuropathic pain), or after inoculation of tumor cells into the facial vibrissal pad; two-way repeated measures ANOVA followed by Newman-Keuls post-hoc test was used to analyze data from these experiments. Facial grooming induced by capsaicin was abolished by pretreatment with pregabalin at 10 and 30 mg/kg. However, pregabalin failed to modify the first phase of the formalin response, but reduced the second phase at both doses (10 and 30 mg/kg). In addition, treatment of rats with pregabalin reduced the heat hyperalgesia induced by carrageenan, as well as by nerve injury and facial cancer. Pregabalin produced a marked antinociceptive effect in rat models of facial inflammatory pain as well as in facial neuropathic and cancer pain models, suggesting that it may represent an important agent for the clinical control of orofacial pain.

Surface hardness of different restorative materials after long-term immersion in sports and energy drinks.

PubMed

Erdemir, Ugur; Yildiz, Esra; Eren, Meltem Mert; Ozel, Sevda

2012-01-01

The purpose of this study was to evaluate the effect of sports and energy drinks on the surface hardness of different restorative materials over a 6-month period. Forty-two disk-shaped specimens were prepared for each of the four restorative materials tested: Compoglass F, Filtek Z250, Filtek Supreme, and Premise. Specimens were immersed for 2 min daily, up to 6 months, in six storage solutions (n=7 per material for each solution): distilled water, Powerade, Gatorade, X-IR, Burn, and Red Bull. Surface hardness was measured at baseline, after 1 week, 1 month, and 6 months. Data were analyzed statistically using repeated measures ANOVA followed by the Bonferroni test for multiple comparisons (α=0.05). Surface hardness of the restorative materials was significantly affected by both immersion solution and immersion period (p<0.001). All tested solutions induced significant reduction in surface hardness of the restorative materials over a 6-month immersion period.

Race, Socioeconomic Status, and Implicit Bias: Implications for Closing the Achievement Gap

NASA Astrophysics Data System (ADS)

Schlosser, Elizabeth Auretta Cox

This study accessed the relationship between race, socioeconomic status, age and the race implicit bias held by middle and high school science teachers in Mobile and Baldwin County Public School Systems. Seventy-nine participants were administered the race Implicit Association Test (race IAT), created by Greenwald, A. G., Nosek, B. A., & Banaji, M. R., (2003) and a demographic survey. Quantitative analysis using analysis of variances, ANOVA and t-tests were used in this study. An ANOVA was performed comparing the race IAT scores of African American science teachers and their Caucasian counterparts. A statically significant difference was found (F = .4.56, p = .01). An ANOVA was also performed using the race IAT scores comparing the age of the participants; the analysis yielded no statistical difference based on age. A t-test was performed comparing the race IAT scores of African American teachers who taught at either Title I or non-Title I schools; no statistical difference was found between groups (t = -17.985, p < .001). A t-test was also performed comparing the race IAT scores of Caucasian teachers who taught at either Title I or non-Title I schools; a statistically significant difference was found between groups ( t = 2.44, p > .001). This research examines the implications of the achievement gap among African American and Caucasian students in science.

Modeling the low-velocity impact characteristics of woven glass epoxy composite laminates using artificial neural networks

NASA Astrophysics Data System (ADS)

Mathivanan, N. Rajesh; Mouli, Chandra

2012-12-01

In this work, a new methodology based on artificial neural networks (ANN) has been developed to study the low-velocity impact characteristics of woven glass epoxy laminates of EP3 grade. To train and test the networks, multiple impact cases have been generated using statistical analysis of variance (ANOVA). Experimental tests were performed using an instrumented falling-weight impact-testing machine. Different impact velocities and impact energies on different thicknesses of laminates were considered as the input parameters of the ANN model. This model is a feed-forward back-propagation neural network. Using the input/output data of the experiments, the model was trained and tested. Further, the effects of the low-velocity impact response of the laminates at different energy levels were investigated by studying the cause-effect relationship among the influential factors using response surface methodology. The most significant parameter is determined from the other input variables through ANOVA.

Evaluation of the three-dimensional accuracy of implant impression techniques in two simulated clinical conditions by optical scanning.

PubMed

Sabouhi, Mahmoud; Bajoghli, Farshad; Abolhasani, Majid

2015-01-01

The success of an implant-supported prosthesis is dependent on the passive fit of its framework fabricated on a precise cast. The aim of this in vitro study was to digitally compare the three-dimensional accuracy of implant impression techniques in partially and completely edentulous conditions. The master model simulated two clinical conditions. The first condition was a partially edentulous mandibular arch with an anterior edentulous space (D condition). Two implant analogs were inserted in bilateral canine sites. After elimination of the teeth, the model was converted to a completely edentulous condition (E condition). Three different impression techniques were performed (open splinted [OS], open unsplinted [OU], closed [C]) for each condition. Six groups of casts (DOS, DOU, DC, EOS, EOU, EC) (n = 8), totaling 48 casts, were made. Two scan bodies were secured onto the master edentulous model and onto each test cast and digitized by an optical scanning system. The related scans were superimposed, and the mean discrepancy for each cast was determined. The statistical analysis showed no significant difference in the accuracy of casts as a function of model status (P = .78, analysis of variance [ANOVA] test), impression technique (P = .57, ANOVA test), or as the combination of both (P = .29, ANOVA test). The distribution of data was normal (Kolmogorov-Smirnov test). Model status (dentate or edentulous) and impression technique did not influence the precision of the casts. There is no difference among any of the impression techniques in either simulated clinical condition.

Initial polishing time affects gloss retention in resin composites.

PubMed

Waheeb, Nehal; Silikas, Nick; Watts, David

2012-10-01

To determine the effect of finishing and polishing time on the surface gloss of various resin-composites before and after simulated toothbrushing. Eight representative resin-composites (Ceram X mono, Ceram X duo, Tetric EvoCeram, Venus Diamond, EsteliteSigma Quick, Esthet.X HD, Filtek Supreme XT and Spectrum TPH) were used to prepare 80 disc-shaped (12 mm x 2 mm) specimens. The two step system Venus Supra was used for polishing the specimens for 3 minutes (Group A) and 10 minutes (Group B). All specimens were subjected to 16,000 cycles of simulated toothbrushing. The surface gloss was measured after polishing and after brushing using the gloss meter. Results were evaluated using one way ANOVA, two ways ANOVA and Dennett's post hoc test (P = 0.05). Group B (10-minute polishing) resulted in higher gloss values (GV) for all specimens compared to Group A (3 minutes). Also Group B showed better gloss retention compared to Group A after simulated toothbrushing. In each group, there was a significant difference between the polished composite resins (P < 0.05). For all specimens there was a decrease in gloss after the simulated toothbrushing.

Histology of Epiphyseal Plate of Adolescent Rat Stimulated by Laserpuncture

NASA Astrophysics Data System (ADS)

Handayani, Selfi; Ramelan, Ari H.; Purwanto, Bambang; Saputra, Koosnadi; Tamtomo, Didik G.

2017-11-01

Epiphyseal plate was used for determining longitudinal bone growth. Laserpuncture was believed to stimulate height growth. We used 40 male Wistar rats which aged three weeks old and weighed more than 40 g as subjects. They randomly divided into group A or B and each group evenly divided into four subgroups which were a negative control and others applied with laser on GV20, ST 36 or combination of GV 20+ST 36 respectively. These acupoints were then stimulated using the laser. After treatment, mice were sacrificed, then tibias were taken for histology preparation processes. By light microscope, epiphyseal plate (EP) height (µm) and chondrocytes hypertrophy (CH) height were measured at six equidistant points, and the values were averaged to obtain a final result for each section. Collected data were analyzed using ANOVA test, and the significant value was set up p< 0.05. The mean of EC and CH were lower than control, but mean of ratio EP/CH were higher than control. However, ANOVA showed that there did not differ significantly (p=0.36).

Effect of a newly developed charging chamber for the treatment of hypotension during hemodialysis.

PubMed

Ikegami, Tadayoshi; Fujii, Zenzo; Minami, Masae; Matsumoto, Machiko; Matsuzaki, Masunori

2006-01-01

We developed a new method of hemodialysis using a charging chamber for treatment of hemodialysis patients with hypotension occurring during the latter half of hemodialysis (collapse). The purpose of this method was to recover systolic blood pressure (BP) by returning a part of blood within the chamber into the body circulation when hemodialysis collapse occurred. Using this method, systolic BP recovery (DeltaBP) in ten hemodialysis patients (4 males, 6 females, mean age 66.0 years old) was compared to a control group treated with intravenous administration of 20 ml of 10% NaCl. When hemodialysis collapse occurred, 60 ml of blood within the chamber in this method and 20 ml of 10% NaCl intravenously in the control group were administered and systolic BP was measured 20 minutes later. The results showed that DeltaBP using this method was 26.0 mm Hg (ANOVA: p = 0.0072), while in the control group it was 30.2 mm Hg (ANOVA: p = 0.0003), and there was no significant difference between the systolic BP recovery of both groups (paired t test: p = 0.4196).

Construct validity of tests that measure kick performance for young soccer players based on cluster analysis: exploring the relationship between coaches rating and actual measures.

PubMed

Palucci Vieira, Luiz H; de Andrade, Vitor L; Aquino, Rodrigo L; Moraes, Renato; Barbieri, Fabio A; Cunha, Sérgio A; Bedo, Bruno L; Santiago, Paulo R

2017-12-01

The main aim of this study was to verify the relationship between the classification of coaches and actual performance in field tests that measure the kicking performance in young soccer players, using the K-means clustering technique. Twenty-three U-14 players performed 8 tests to measure their kicking performance. Four experienced coaches provided a rating for each player as follows: 1: poor; 2: below average; 3: average; 4: very good; 5: excellent as related to three parameters (i.e. accuracy, power and ability to put spin on the ball). The scores interval established from k-means cluster metric was useful to originating five groups of performance level, since ANOVA revealed significant differences between clusters generated (P<0.01). Accuracy seems to be moderately predicted by the penalty kick, free kick, kicking the ball rolling and Wall Volley Test (0.44≤r≤0.56), while the ability to put spin on the ball can be measured by the free kick and the corner kick tests (0.52≤r≤0.61). Body measurements, age and PHV did not systematically influence the performance. The Wall Volley Test seems to be a good predictor of other tests. Five tests showed reasonable construct validity and can be used to predict the accuracy (penalty kick, free kick, kicking a rolling ball and Wall Volley Test) and ability to put spin on the ball (free kick and corner kick tests) when kicking in soccer. In contrast, the goal kick, kicking the ball when airborne and the vertical kick tests exhibited low power of discrimination and using them should be viewed with caution.

An Analytic Solution to the Computation of Power and Sample Size for Genetic Association Studies under a Pleiotropic Mode of Inheritance.

PubMed

Gordon, Derek; Londono, Douglas; Patel, Payal; Kim, Wonkuk; Finch, Stephen J; Heiman, Gary A

2016-01-01

Our motivation here is to calculate the power of 3 statistical tests used when there are genetic traits that operate under a pleiotropic mode of inheritance and when qualitative phenotypes are defined by use of thresholds for the multiple quantitative phenotypes. Specifically, we formulate a multivariate function that provides the probability that an individual has a vector of specific quantitative trait values conditional on having a risk locus genotype, and we apply thresholds to define qualitative phenotypes (affected, unaffected) and compute penetrances and conditional genotype frequencies based on the multivariate function. We extend the analytic power and minimum-sample-size-necessary (MSSN) formulas for 2 categorical data-based tests (genotype, linear trend test [LTT]) of genetic association to the pleiotropic model. We further compare the MSSN of the genotype test and the LTT with that of a multivariate ANOVA (Pillai). We approximate the MSSN for statistics by linear models using a factorial design and ANOVA. With ANOVA decomposition, we determine which factors most significantly change the power/MSSN for all statistics. Finally, we determine which test statistics have the smallest MSSN. In this work, MSSN calculations are for 2 traits (bivariate distributions) only (for illustrative purposes). We note that the calculations may be extended to address any number of traits. Our key findings are that the genotype test usually has lower MSSN requirements than the LTT. More inclusive thresholds (top/bottom 25% vs. top/bottom 10%) have higher sample size requirements. The Pillai test has a much larger MSSN than both the genotype test and the LTT, as a result of sample selection. With these formulas, researchers can specify how many subjects they must collect to localize genes for pleiotropic phenotypes. © 2017 S. Karger AG, Basel.

Timing considerations on the shear bond strength of orthodontic brackets after topical fluoride varnish applications

PubMed Central

Cossellu, Gianguido; Lanteri, Valentina; Butera, Andrea; Laffi, Nicola; Merlini, Alberto; Farronato, Giampietro

2017-01-01

Objectives: To assess the best temporal association between the application of a fluoride varnish on enamel and bonding procedures. Materials and Methods: Eighty mandibular bovine incisors were used. Teeth were divided into 4 groups (20 per group); Groups 1–3 were treated with fluoride varnish (Fluor Protector, Ivoclar Vivadent, Schaan, Liechtenstein), and Group 4 served as control with no pretreatment. Tooth were stored in deionized water (37°C) and subjected to thermal cycling for 400 (Group 1), 800 (Group 2), and 2500 (Group 3) cycles corresponding, respectively, to 15, 30, and 90 days in order to simulate the three different timing of bracket bonding. Shear bond strength (SBS) was measured using an Instron Universal Testing machine. Tooth surfaces were examined under a stereomicroscope at 10× magnification to assess the amount of adhesive remnant index (ARI). One-way analysis of variance (ANOVA) and Tukey's honestly significant difference post-hoc test were used for the comparison of SBS values between groups (P < 0.05). The Chi-square test was used to examine differences among ARI scores. (P < 0.05). Results: One-way ANOVA and Tukey post-hoc test showed that the SBS of different groups were significantly different and was impacted by different timing of bonding (P < 0.05). The main differences were between the control group (17.02 ± 6.38 MPa) and Group 1 (6.93 ± 4.3 MPa). The ARI scores showed that there were no significant differences between the four tested groups. Conclusions: The SBS of the brackets bonded 15 days after the application of the fluoride was set back to an optimal value. PMID:28197397

Digital versus conventional techniques for pattern fabrication of implant-supported frameworks

PubMed Central

Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

2018-01-01

Objective: The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Materials and Methods: Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method (n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal–Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. Statistical Analysis Used: One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. Results: The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups (P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group (P < 0.001), while there was no significant difference between the two other groups (P = 0.54). CAD/CAM group required significantly more adjustments (P < 0.001). Conclusions: CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations. PMID:29657528

Digital versus conventional techniques for pattern fabrication of implant-supported frameworks.

PubMed

Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

2018-01-01

The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method ( n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal-Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups ( P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group ( P < 0.001), while there was no significant difference between the two other groups ( P = 0.54). CAD/CAM group required significantly more adjustments ( P < 0.001). CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations.

Effect of pH on whitening efficacy of 35% hydrogen peroxide and enamel microhardness.

PubMed

Jurema, Ana Luiza Barbosa; de Souza, Mauricio Yugo; Torres, Carlos Rocha Gomes; Borges, Alessandra Bühler; Caneppele, Taciana Marco Ferraz

2018-03-01

This study aimed to evaluate the effect of 35% hydrogen peroxide at different pH values and the degree of tooth staining on whitening efficacy and enamel microhardness. 90 enamel-dentin specimens were obtained from bovine incisors. They were randomly divided into 2 groups (n = 45), 1 group was immersed in a staining broth for 14 days, and another group was not stained and kept in distilled water at 37°C. Twenty-four hours after the staining procedure, each group was distributed into 3 subgroups that were whitened by 35% hydrogen peroxide with different pH values (5, 7, and 8.4) for 30 minutes. The color was measured at baseline and 7 days after whitening. Microhardness was measured at baseline, immediate, 24 hours, and 1 month after the whitening procedure. Data were submitted to 2-way analysis of variance (ANOVA) and the Tukey test for multiple comparisons for color analysis. Repeated measures ANOVA and the Tukey test were used to analyze microhardness data. The color change of the stained groups (ΔE 00  = 4.6) was significantly higher than that of the nonstained groups (ΔE 00  = 3.7). Microhardness value decreased significantly immediately after whitening for all subgroups and did not return to initial values. For each measurement time, microhardness was not significantly different among subgroups with different pH values. Despite the effectiveness of 35% hydrogen peroxide, changes on gel pH did not affect the whitening efficacy, and the enamel was superficially demineralized, regardless of pH values. Independently of the pH value of whitening gel, enamel undergoes superficial demineralization and with a reduction in superficial microhardness that does not return to the initial values. However, using hydrogen peroxide with different pH values does not alter the whitening effect. © 2018 Wiley Periodicals, Inc.

Effect of Dentin Wetness on the Bond Strength of Universal Adhesives.

PubMed

Choi, An-Na; Lee, Ji-Hye; Son, Sung-Ae; Jung, Kyoung-Hwa; Kwon, Yong Hoon; Park, Jeong-Kil

2017-10-25

The effects of dentin wetness on the bond strength and adhesive interface morphology of universal adhesives have been investigated using micro-tensile bond strength (μTBS) testing and confocal laser scanning microscopy (CLSM). Seventy-two human third molars were wet ground to expose flat dentin surfaces. They were divided into three groups according to the air-drying time of the dentin surfaces: 0 (without air drying), 5, and 10 s. The dentin surfaces were then treated with three universal adhesives: G-Premio Bond, Single Bond Universal, and All-Bond Universal in self-etch or etch-and-rinse mode. After composite build up, a μTBS test was performed. One additional tooth was prepared for each group by staining the adhesives with 0.01 wt % of Rhodamine B fluorescent dye for CLSM analysis. The data were analyzed statistically using ANOVA and Tukey's post hoc tests (α = 0.05). Two-way ANOVA showed significant differences among the adhesive systems and dentin moisture conditions. An interaction effect was also observed ( p < 0.05). One-way ANOVA showed that All-Bond Universal was the only material influenced by the wetness of the dentin surfaces. Wetness of the dentin surface is a factor influencing the micro-tensile bond strength of universal adhesives.

Effect of Dentin Wetness on the Bond Strength of Universal Adhesives

PubMed Central

Lee, Ji-Hye; Son, Sung-Ae; Jung, Kyoung-Hwa; Kwon, Yong Hoon

2017-01-01

The effects of dentin wetness on the bond strength and adhesive interface morphology of universal adhesives have been investigated using micro-tensile bond strength (μTBS) testing and confocal laser scanning microscopy (CLSM). Seventy-two human third molars were wet ground to expose flat dentin surfaces. They were divided into three groups according to the air-drying time of the dentin surfaces: 0 (without air drying), 5, and 10 s. The dentin surfaces were then treated with three universal adhesives: G-Premio Bond, Single Bond Universal, and All-Bond Universal in self-etch or etch-and-rinse mode. After composite build up, a μTBS test was performed. One additional tooth was prepared for each group by staining the adhesives with 0.01 wt % of Rhodamine B fluorescent dye for CLSM analysis. The data were analyzed statistically using ANOVA and Tukey’s post hoc tests (α = 0.05). Two-way ANOVA showed significant differences among the adhesive systems and dentin moisture conditions. An interaction effect was also observed (p < 0.05). One-way ANOVA showed that All-Bond Universal was the only material influenced by the wetness of the dentin surfaces. Wetness of the dentin surface is a factor influencing the micro-tensile bond strength of universal adhesives. PMID:29068404

Distributed practice. The more the merrier? A randomised bronchoscopy simulation study.

PubMed

Bjerrum, Anne Sofie; Eika, Berit; Charles, Peder; Hilberg, Ole

2016-01-01

The distribution of practice affects the acquisition of skills. Distributed practice has shown to be more effective for skills acquisition than massed training. However, it remains unknown as to which is the most effective distributed practice schedule for learning bronchoscopy skills through simulation training. This study compares two distributed practice schedules: One-day distributed practice and weekly distributed practice. Twenty physicians in training were randomly assigned to one-day distributed or weekly distributed bronchoscopy simulation practice. Performance was assessed with a pre-test, a post-test after each practice session, and a 4-week retention test using previously validated simulator measures. Data were analysed with repeated measures ANOVA. No interaction was found between group and test (F(4,72) <1.68, p>0.16), except for the measure 'percent-segments-entered', and no main effect of group was found for any of the measures (F(1,72)< 0.87, p>0.36), which indicates that there was no difference between the learning curves of the one-day distributed practice schedule and the weekly distributed practice schedule. We found no difference in effectiveness of bronchoscopy skills acquisition between the one-day distributed practice and the weekly distributed practice. This finding suggests that the choice of bronchoscopy training practice may be guided by what best suits the clinical practice.

Profile of mathematical reasoning ability of 8th grade students seen from communicational ability, basic skills, connection, and logical thinking

NASA Astrophysics Data System (ADS)

Sumarsih; Budiyono; Indriati, D.

2018-04-01

This research aims to understand the students’ weaknesses in mathematical reasoning ability in junior secondary school. A set of multiple choice tests were used to measure this ability involve components mathematical communication, basic skills, connection, and logical thinking. A total of 259 respondents were determined by stratified cluster random sampling. Data were analyzed using one-way Anova test with Fobs = 109.5760 and F = 3.0000. The results show that students’ ability from schools with high National Exam in mathematics category was the best and followed by medium and low category. Mathematical connection is the most difficult component performed by students. In addition, most students also have difficulty in expressing ideas and developing logical arguments.

Salt stress-induced transcription of σB- and CtsR-regulated genes in persistent and non-persistent Listeria monocytogenes strains from food processing plants.

PubMed

Ringus, Daina L; Ivy, Reid A; Wiedmann, Martin; Boor, Kathryn J

2012-03-01

Listeria monocytogenes is a foodborne pathogen that can persist in food processing environments. Six persistent and six non-persistent strains from fish processing plants and one persistent strain from a meat plant were selected to determine if expression of genes in the regulons of two stress response regulators, σ(B) and CtsR, under salt stress conditions is associated with the ability of L. monocytogenes to persist in food processing environments. Subtype data were also used to categorize the strains into genetic lineages I or II. Quantitative reverse transcriptase-polymerase chain reaction (qRT-PCR) was used to measure transcript levels for two σ(B)-regulated genes, inlA and gadD3, and two CtsR-regulated genes, lmo1138 and clpB, before and after (t=10 min) salt shock (i.e., exposure of exponential phase cells to BHI+6% NaCl for 10 min at 37°C). Exposure to salt stress induced higher transcript levels relative to levels under non-stress conditions for all four stress and virulence genes across all wildtype strains tested. Analysis of variance (ANOVA) of induction data revealed that transcript levels for one gene (clpB) were induced at significantly higher levels in non-persistent strains compared to persistent strains (p=0.020; two-way ANOVA). Significantly higher transcript levels of gadD3 (p=0.024; two-way ANOVA) and clpB (p=0.053; two-way ANOVA) were observed after salt shock in lineage I strains compared to lineage II strains. No clear association between stress gene transcript levels and persistence was detected. Our data are consistent with an emerging model that proposes that establishment of L. monocytogenes persistence in a specific environment occurs as a random, stochastic event, rather than as a consequence of specific bacterial strain characteristics.

Comparing the efficacy of mydriatic cocktail-soaked sponge and conventional pupil dilation in patients using tamsulosin - a randomized controlled trial.

PubMed

Hargitai, János; Vezendi, László; Vigstrup, Jørgen; Eisgart, Finn; Lundbye-Christensen, Søren; Hargitai, Bálint; Vorum, Henrik

2013-12-20

A strong association exists between the use of tamsulosin and the occurance of intraoperative floppy iris syndrome. Several methods were advocated to overcome the progressive intraopertive miosis.Our purpose was to investigate the effect of a mydriatic-cocktail soaked cellulose sponge on perioperative pupil diameter in tamsulosin-treated patients undergoing elective cataract surgery. Patients using tamsulosin were dilated either with mydriatic-cocktail soaked sponge (group 1) or with conventional eyedrop regimen (group 2). Control patients not taking any α1 adrenergic receptor inhibtors were also dilated with mydriatic sponge (group 3).In all groups oxybuprocain 0.4%, cocain 4%, tropicamide 1%, phenylephrine 10%, diclophenac 0.1% along with chloramphenicol 0.5% were used preoperatively.Pupil diameter (mm) was measured preoperatively, after nucleus delivery, and before IOL implantation. Adverse effects associated with the use of sponge, minor and major intraoperative complications, the use of iris retractors and operation time were recorded.Differences in general between groups were analyzed with a one way analysis of variance (ANOVA); differences between groups in proportions were assessed by Fisher's exact test. Mean pupil diameter (mm) was preopertively: 7.52 ± 1.21, 7.30 ± 1.55 and 7.99 ± 0.96 (ANOVA: p = 0.079); after nucleus delivery: 6 ± 1.20, 6.29 ± 1.12 and 6.52 ± 0.81 (ANOVA: p = 0.123); before IOL implantation: 5.46 ± 1.06, 5.83 ± 1.09 and 6.17 ± 0.89 (ANOVA: p = 0.0291).No adverse effect related to sponge use was detected. Frequency of minor complications, and iris hook use was similar in the two tamsulosin treated group. Operation time did not differ significantly in the three groups. We have found that using a mydriatic cocktail-soaked wick - an alternative way to achieve intraoperative mydriasis for cataract surgery - was as effective and safe as the conventional repeated eyedrops regiment for tamsulosin treated patients. Current Controlled Trials ISRCTN37834752.

Effect of various digital processing algorithms on the measurement accuracy of endodontic file length.

PubMed

Kal, Betül Ilhan; Baksi, B Güniz; Dündar, Nesrin; Sen, Bilge Hakan

2007-02-01

The aim of this study was to compare the accuracy of endodontic file lengths after application of various image enhancement modalities. Endodontic files of three different ISO sizes were inserted in 20 single-rooted extracted permanent mandibular premolar teeth and standardized images were obtained. Original digital images were then enhanced using five processing algorithms. Six evaluators measured the length of each file on each image. The measurements from each processing algorithm and each file size were compared using repeated measures ANOVA and Bonferroni tests (P = 0.05). Paired t test was performed to compare the measurements with the true lengths of the files (P = 0.05). All of the processing algorithms provided significantly shorter measurements than the true length of each file size (P < 0.05). The threshold enhancement modality produced significantly higher mean error values (P < 0.05), while there was no significant difference among the other enhancement modalities (P > 0.05). Decrease in mean error value was observed with increasing file size (P < 0.05). Invert, contrast/brightness and edge enhancement algorithms may be recommended for accurate file length measurements when utilizing storage phosphor plates.

In vitro evaluation of marginal adaptation in five ceramic restoration fabricating techniques.

PubMed

Ural, Cağri; Burgaz, Yavuz; Saraç, Duygu

2010-01-01

To compare in vitro the marginal adaptation of crowns manufactured using ceramic restoration fabricating techniques. Fifty standardized master steel dies simulating molars were produced and divided into five groups, each containing 10 specimens. Test specimens were fabricated with CAD/CAM, heat-press, glass-infiltration, and conventional lost-wax techniques according to manufacturer instructions. Marginal adaptation of the test specimens was measured vertically before and after cementation using SEM. Data were statistically analyzed by one-way ANOVA with Tukey HSD tests (a = .05). Marginal adaptation of ceramic crowns was affected by fabrication technique and cementation process (P < .001). The lowest marginal opening values were obtained with Cerec-3 crowns before and after cementation (P < .001). The highest marginal discrepancy values were obtained with PFM crowns before and after cementation. Marginal adaptation values obtained in the compared systems were within clinically acceptable limits. Cementation causes a significant increase in the vertical marginal discrepancies of the test specimens.

48-hours administration of fenoterol in spontaneous preterm labor - does it affect fetal preload?

PubMed

Grzesiak, Mariusz; Forys, Sebastian; Sobczak, Malgorzata; Ahmed, Rehana B; Wilczynski, Jan

2013-01-01

to investigate whether any changes in the preload index (PLI) occur within the first 48 hours of fenoterol intravenous tocolysis. Doppler evaluation of placental and fetal circulation was performed in 36 pregnant women prior to fenoterol administration and after 24/48 hours. Measurements were obtained from a longitudinal section of the inferior vena cava (IVC) and preload index was calculated. To determine changes over time, an all study variable analysis of variance (ANOVA) for repeated measurements, followed by Tukey-Kramer's multiple comparison test was used. The effects of additional clinical covariates were checked. The maternal heart rate values were significantly increased after 24 hours and 48 hours in comparison to pre-treatment values. No significant changes in fetal heart rate were observed during treatment. The fetal IVC PLI values were significantly reduced after 24 hours and 48 hours of treatment. The increase in PLI values when comparing 24 and 48 hours results were not statistically significant. These observations were consistent with ANOVA post-hoc analysis. 48 hours intravenous administration of fenoterol appears not to alter inferior vena cava blood flow by itself. The reduction in PLI values may reflect lower fetal preload conditions during the course of successful tocolytic treatment. Therefore, Doppler IVC PLI measurement should be considered as a possible additional assessment method of effectiveness of treatment. However, other Doppler venous blood flow parameters should be assessed to confirm the results and clarify whether maternal corticosteroids administration may be interfering with the results.

Efficacy of denture adhesives in maxillary dentures using gnathodynamometry: a comparative study.

PubMed

Polyzois, Gregory; Lagouvardos, Panagiotis; Frangou, Maria; Stefaniotis, Theodoros

2011-07-01

The purpose of this study was to investigate the effect of four commercially available denture adhesives on the incisal and premolar dislodgement forces of maxillary complete dentures by using an electronic and disposable gnathodynamometer and compare the measured incisal forces for differences. This study was conducted with 12 complete maxillary denture wearers. Four commercially available denture adhesives Super Corega(®), Corega Ultra(®), Super Corega Powder(®) and Fittydent Cationic(®) were investigated. Testing protocol and sequence included baseline measurements without adhesives (control) for previous and new dentures and then replications of measurements with the four adhesives. Maximum dislodgement forces were recorded in two sites between central incisors and the left 2nd premolars by using an electronic and disposable gnathodynamometer. To estimate the effect of the different adhesives on the dislodgement forces, data were analyzed by a 2- and 3-way ANOVA, while for estimating the agreement of the two devices a Bland-Altman and Mountain plots were used. ANOVAs indicated significant differences between adhesives (p < 0.05), denture types (p < 0.05) and biting sites (p < 0.05) with both devices. Bland-Altman plot and Mountain plots indicated a poor agreement of the two devices. It was concluded that denture adhesives increase the denture dislodgement forces, but with differences among them. The two devices do not highly agree with each other, but each one alone is useful in estimating dislodgement forces in clinical practice and research.

Effect of training pediatricians and family physicians in early childhood caries prevention.

PubMed

Herndon, Jill Boylston; Tomar, Scott L; Catalanotto, Frank A

2015-04-01

To analyze the effect of postresidency early childhood caries prevention training on physicians' oral health knowledge, confidence, and practice patterns and to identify variations by type of training. We conducted pre- and post-training surveys of pediatricians and family physicians in Florida. Paired t test and repeated-measures ANOVA analyses were used to compare physicians with no oral health training, those with applied in-office training, and those with another type of training on 5 composite measures: fluoride knowledge, nonfluoride oral health knowledge, confidence in advising parents, confidence in conducting oral health screening and caries risk assessment, and frequency in performing recommended oral health practices. The final sample included 229 physicians (162 pediatricians and 67 family physicians). The interaction in the repeated-measures ANOVA between group (training category) and time (pre- and post-training) was significant for the nonfluoride knowledge [F(2, 225) = 4.1, P = .02] and confidence in screening [F(2, 224) = 4.1, P = .02] composite measures, lending support for a positive treatment effect of training on these domains. Greater gains were observed among physicians with in-office training compared with those who received another type of training. A statistically significant treatment effect on oral health practices was not detected. Efforts to engage physicians in oral health training and to incorporate applied components in training curricula may improve physicians' oral health knowledge and increase their confidence in conducting oral health screenings and caries risk assessments. Additional research is needed to evaluate the relative costs and benefits of different training modalities on specific oral health practices. Copyright © 2015 Elsevier Inc. All rights reserved.

ANOVA Analysis of Student Daily Test Scores in Multi-Day Test Periods

ERIC Educational Resources Information Center

Mouritsen, Matthew L.; Davis, Jefferson T.; Jones, Steven C.

2016-01-01

Instructors are often concerned when giving multiple-day tests because students taking the test later in the exam period may have an advantage over students taking the test early in the exam period due to information leakage. However, exam scores seemed to decline as students took the same test later in a multi-day exam period (Mouritsen and…

A comparison of the wear resistance and hardness of indirect composite resins.

PubMed

Mandikos, M N; McGivney, G P; Davis, E; Bush, P J; Carter, J M

2001-04-01

Various new, second-generation indirect composites have been developed with claimed advantages over existing tooth-colored restorative materials. To date, little independent research has been published on these materials, and the properties specified in the advertising materials are largely derived from in-house or contracted testing. Four second-generation indirect composites (Artglass, belleGlass, Sculpture, and Targis) were tested for wear resistance and hardness against 2 control materials with well-documented clinical application. Human enamel was also tested for comparison. Twelve specimens of each material were fabricated according to the manufacturers' directions and subjected to accelerated wear in a 3-body abrasion, toothbrushing apparatus. Vickers hardness was measured for each of the tested materials, and energy dispersive x-ray (EDX) spectroscopy was performed to determine the elemental composition of the composite fillers. The statistical tests used for wear and hardness were the Kruskal-Wallis 1-way ANOVA test with Mann-Whitney tests and 1-way ANOVA with multiple comparisons (Tukey HSD). The Pearson correlation coefficient was used to determine the existence of a relationship between the hardness of the materials and the degree to which they had worn. The level of statistical significance chosen was alpha=.05. The control material Concept was superior to the other composites in wear resistance and hardness and had the lowest surface roughness. Significant relationships were observed between depth of wear and hardness and between depth of wear and average surface roughness. Enamel specimens were harder and more wear resistant than any of the composites. EDX spectroscopy revealed that the elemental composition of the fillers of the 4 new composites was almost identical, as was the composition of the 2 control composites. The differences in wear, hardness, and average surface roughness may have been due to differences in the chemistry or method of polymerization of the composites. Further research in this area should be encouraged. It was also apparent that the filler present in the tested composites did not exactly fit the manufacturers' descriptions.

3D and 2D marginal fit of pressed and CAD/CAM lithium disilicate crowns made from digital and conventional impressions.

PubMed

Anadioti, Evanthia; Aquilino, Steven A; Gratton, David G; Holloway, Julie A; Denry, Isabelle; Thomas, Geb W; Qian, Fang

2014-12-01

This in vitro study evaluated the 3D and 2D marginal fit of pressed and computer-aided-designed/computer-aided-manufactured (CAD/CAM) all-ceramic crowns made from digital and conventional impressions. A dentoform tooth (#30) was prepared for an all-ceramic crown (master die). Thirty type IV definitive casts were made from 30 polyvinyl siloxane (PVS) impressions. Thirty resin models were produced from thirty Lava Chairside Oral Scanner impressions. Thirty crowns were pressed in lithium disilicate (IPS e.max Press; 15/impression technique). Thirty crowns were milled from lithium disilicate blocks (IPS e.max CAD; 15/impression technique) using the E4D scanner and milling engine. The master die and the intaglio of the crowns were digitized using a 3D laser coordinate measurement machine with accuracy of ±0.00898 mm. For each specimen a separate data set was created for the Qualify 2012 software. The digital master die and the digital intaglio of each crown were merged using best-fitting alignment. An area above the margin with 0.75 mm occlusal-gingival width circumferentially was defined. The 3D marginal fit of each specimen was an average of all 3D gap values on that area. For the 2D measurements, the marginal gap was measured at two standardized points (on the margin and at 0.75 mm above the margin), from standardized facial-lingual and mesial-distal digitized sections. One-way ANOVA with post hoc Tukey's honestly significant difference and two-way ANOVA tests were used, separately, for statistical analysis of the 3D and 2D marginal data (alpha = 0.05). One-way ANOVA revealed that both 3D and 2D mean marginal gap for group A: PVS impression/IPS e.max Press (0.048 mm ± 0.009 and 0.040 mm ± 0.009) were significantly smaller than those obtained from the other three groups (p < 0.0001), while no significant differences were found among groups B: PVS impression/IPS e.max CAD (0.088 mm ± 0.024 and 0.076 mm ± 0.023), C: digital impression/IPS e.max Press (0.089 mm ± 0.020 and 0.075 mm ± 0.015) and D: digital impression/IPS e.max CAD (0.084 mm ± 0.021 and 0.074 mm ± 0.026). The results of two-way ANOVA revealed a significant interaction between impression techniques and crown fabrication methods for both 3D and 2D measurements. The combination of PVS impression method and press fabrication technique produced the most accurate 3D and 2D marginal fits. © 2014 by the American College of Prosthodontists.

Reliability, repeatability, and reproducibility of pulmonary transit time assessment by contrast enhanced echocardiography.

PubMed

Herold, Ingeborg H F; Saporito, Salvatore; Bouwman, R Arthur; Houthuizen, Patrick; van Assen, Hans C; Mischi, Massimo; Korsten, Hendrikus H M

2016-01-05

The aim of this study is to investigate the inter and intra-rater reliability, repeatability, and reproducibility of pulmonary transit time (PTT) measurement in patients using contrast enhanced ultrasound (CEUS), as an indirect measure of preload and left ventricular function. Mean transit times (MTT) were measured by drawing a region of interest (ROI) in right and left cardiac ventricle in the CEUS loops. Acoustic intensity dilution curves were obtained from the ROIs. MTTs were calculated by applying model-based fitting on the dilution curves. PTT was calculated as the difference of the MTTs. Eight raters with different levels of experience measured the PTT (time moment 1) and repeated the measurement within a week (time moment 2). Reliability and agreement were assessed using intra-class correlations (ICC) and Bland-Altman analysis. Repeatability was tested by estimating the variance of means (ANOVA) of three injections in each patient at different doses. Reproducibility was tested by the ICC of the two time moments. Fifteen patients with heart failure were included. The mean PTT was 11.8 ± 3.1 s at time moment 1 and 11.7 ± 2.9 s at time moment 2. The inter-rater reliability for PTT was excellent (ICC = 0.94). The intra-rater reliability per rater was between 0.81-0.99. Bland-Altman analysis revealed a bias of 0.10 s within the rater groups. Reproducibility for PTT showed an ICC = 0.94 between the two time moments. ANOVA showed no significant difference between the means of the three different doses F = 0.048 (P = 0.95). The mean and standard deviation for PTT estimates at three different doses was 11.6 ± 3.3 s. PTT estimation using CEUS shows a high inter- and intra-rater reliability, repeatability at three different doses, and reproducibility by ROI drawing. This makes the minimally invasive PTT measurement using contrast echocardiography ready for clinical evaluation in patients with heart failure and for preload estimation.

Counting with Colours? Effect of Colours on the Numerical Abilities of House Crows (Corvus splendens) and Common Myna (Acridotheres tristis)

PubMed Central

Rahman, Nor Amira Abdul; Ali, Zalila; Zuharah, Wan Fatma; Fadzly, Nik

2016-01-01

We conducted several aviary experiments to investigate the influence of colours in quantity judgments of two species of birds; house crow (Corvus splendens) and common myna (Acridotheres tristis). Different quantity (in seven different food proportions) of mealworms were presented nonsequentially to all birds using artificially coloured red mealworms, for experiment 1, and using artificially coloured green mealworms, for experiment 2. Both red and green coloured mealworms have no significant effect on house crow’s quantity judgments (red: ANOVA: F6,30 = 1.748, p = 0.144; and green: ANOVA: F6,30= 1.085, p = 0.394). Common myna, however, showed a strong influence of red colour in their quantity judgment (ANOVA: F6,30 = 2.922, p = 0.023) as they succeeded in choosing the largest amount of food between two cups, but not when offered food using green coloured mealworms (ANOVA: F6,30 = 1.183, p = 0.342). In the next experiment, we hypothesised that both house crow and common myna will prefer red coloured food items over green coloured food items, when factors such as the amount of food is equal. We chose to test red and green colours because both colours play an important role in most avian food selections. Results showed that there were no significant differences in the selection of red or green coloured mealworms for both house crows (ANOVA: F6,30 = 2.310, p = 0.06) and common myna (ANOVA: F6,30 = 0.823, p = 0.561). PMID:27688847

TTWand NHT in problem solving

NASA Astrophysics Data System (ADS)

Anthycamurty, R. C. C.; Mardiyana; Saputro, D. R. S.

2018-05-01

This research aims to analyze and determine effect of the model on problem solving. Subjects in this research are students of class X SMK in Purworejo. The learning model used in this research was TTW in class experimental 1 and NHT class experiment 2. This research used quasi experiment. Data analysis technique in this research used ANOVA two way. Data collection techniques in this research used tests to measure student problem solving and GEFT to measure students' cognitive style. The results of this research indicate that there are differences in problem solving between experimental classes used TTW and NHT. The impact of this research is that students are able to remind problem solving used learning model and to know cognitive style of the students.

Effect of single-dose low-level helium-neon laser irradiation on orthodontic pain: a split-mouth single-blind placebo-controlled randomized clinical trial.

PubMed

Sobouti, Farhad; Khatami, Maziar; Chiniforush, Nasim; Rakhshan, Vahid; Shariati, Mahsa

2015-01-01

Pain is the most common complication of orthodontic treatment. Low-level laser therapy (LLLT) has been suggested as a new analgesic treatment free of the adverse effects of analgesic medications. However, it is not studied thoroughly, and the available studies are quite controversial. Moreover, helium neon (He-Ne) laser has not been assessed before. This split-mouth placebo-controlled randomized clinical trial was performed on 16 male and 14 female orthodontic patients requiring bilateral upper canine retraction. The study was performed at a private clinic in Sari, Iran, in 2014. It was single blind: patients, orthodontist, and personnel were blinded of the allocations, but the laser operator (periodontist) was not blinded. Once canine retractor was activated, a randomly selected maxillary quarter received a single dose of He-Ne laser irradiation (632.8 nm, 10 mw, 6 j/cm(2) density). The other quarter served as the placebo side, treated by the same device but powered off. In the first, second, fourth, and seventh days, blinded patients rated their pain sensed on each side at home using visual analog scale (VAS) questionnaires. There was no harm identified during or after the study. Pain changes were analyzed using two- and one-way repeated-measures ANOVA, Bonferroni, and t-test (α = 0.01, β > 0.99). This trial was not registered. It was self-funded by the authors. Sixteen males and 11 females remained in the study (aged 12-21). Average pain scores sensed in all 4 intervals on control and laser sides were 4.06 ± 2.85 and 2.35 ± 1.77, respectively (t-test P < 0.0001). One-way ANOVA showed significant pain declines over time, in each group (P < 0.0001). Two-way ANOVA showed significant effects for LLLT (P < 0.0001) and time (P = <0.0001). Single-dose He-Ne laser therapy might reduce orthodontic pain caused by retracting maxillary canines.

Quality of life, optimism/pessimism, and knowledge and attitudes toward HIV Screening among pregnant women in Ghana.

PubMed

Moyer, Cheryl A; Ekpo, Geraldine; Calhoun, Cecilia L; Greene, Jonathan; Naik, Sujata; Sippola, Emily; Stern, David T; Adanu, Richard M; Koranteng, Isaac O; Kwawukume, Enyonam Yao; Anderson, Frank J

2008-01-01

We sought to explore optimism/pessimism, knowledge of HIV, and attitudes toward HIV screening and treatment among Ghanaian pregnant women. Pregnant women in Accra, Ghana, completed a self-administered questionnaire including the Life Orientation Test-Revised (LOT-R, an optimism/pessimism measure), an HIV knowledge and screening attitudes questionnaire, the Short Form 12 (SF-12, a measure of health-related quality of life [HRQOL]), and a demographic questionnaire. Data were analyzed using t-tests, ANOVA, correlations, and the chi2 test. There were 101 participants; 28% were nulliparous. Mean age was 29.7 years, and mean week of gestation was 31.8. All women had heard of AIDS, 27.7% had been tested for HIV before this pregnancy, 46.5% had been tested during this pregnancy, and 59.4% of the sample had ever been tested for HIV. Of those not tested during this pregnancy, 64.2% were willing to be tested. Of all respondents, 89% said they would get tested if antiretroviral drugs (ARVs) were readily available and might prevent maternal-to-child transmission. Neither optimism/pessimism nor HRQOL was associated with attitudes toward HIV screening. Optimism was negatively correlated with HIV knowledge (p = .001) and was positively correlated with having never been tested before this pregnancy (p = .007). The relationship between optimism/pessimism and HIV knowledge and screening behavior is worthy of further study using larger samples and objective measures of testing beyond self-report.

Why we should use simpler models if the data allow this: relevance for ANOVA designs in experimental biology.

PubMed

Lazic, Stanley E

2008-07-21

Analysis of variance (ANOVA) is a common statistical technique in physiological research, and often one or more of the independent/predictor variables such as dose, time, or age, can be treated as a continuous, rather than a categorical variable during analysis - even if subjects were randomly assigned to treatment groups. While this is not common, there are a number of advantages of such an approach, including greater statistical power due to increased precision, a simpler and more informative interpretation of the results, greater parsimony, and transformation of the predictor variable is possible. An example is given from an experiment where rats were randomly assigned to receive either 0, 60, 180, or 240 mg/L of fluoxetine in their drinking water, with performance on the forced swim test as the outcome measure. Dose was treated as either a categorical or continuous variable during analysis, with the latter analysis leading to a more powerful test (p = 0.021 vs. p = 0.159). This will be true in general, and the reasons for this are discussed. There are many advantages to treating variables as continuous numeric variables if the data allow this, and this should be employed more often in experimental biology. Failure to use the optimal analysis runs the risk of missing significant effects or relationships.

In vitro wear of various orthotic device materials.

PubMed

Casey, Jeffery; Dunn, William J; Wright, Edward

2003-11-01

Orthotic devices are advocated to decrease occlusal attrition caused by bruxism but tend to wear with time. This study investigated the wear rate of various materials used to fabricate orthotic devices. Five experimental groups (n=8) were studied: Splint Biocryl autopolymerized (SBA), Splint Biocryl autopolymerized plus additional heat and pressure (SBHP), Forestacryl autopolymerized (FA), Forestacryl autopolymerized plus additional heat and pressure (FHP), and Quick Splint 15-minute (QS), light-polymerized composite. Specimens were mounted to the base of a universal testing machine. A wear device using steatite balls and a load of 9.1 kg was positioned against the specimens, submerged in a 37 degrees C water bath and subjected to 2500 reciprocal cycles. Wear, in micrometers, was calculated as the maximum peak to valley measurement (Ry) using profilometry. Data were subjected to analysis of variance (ANOVA) and Tukey's HSD (alpha=.05). Mean acrylic wear in micrometers was as follows: FA 6.8 +/-3.0; FHP 7.1 +/- 1.8; SBA 20.4 +/- 5.6; SBHP 23.7 +/- 7.8; and QS 23.8 +/- 6.9. One-way ANOVA detected significant differences between groups (P<.001); the Tukey honestly significant difference test determined that FA and FHP specimens were significantly more resistant to wear than all other specimens (P=.007). Differences in in vitro wear resistance among various orthotic device materials exist. The in vitro wear resistance among other autopolymerizing materials appears to be related to proprietary differences.

Measurements for certification of chlortetracycline reference materials within the European Union Standards, Measurements and Testing programme.

PubMed

Juhel-Gaugain, M; McEvoy, J D; VanGinkel, L A

2000-12-01

The experimental design of a material certification programme is described. The matrix reference materials (RMs) comprised chlortetracycline (CTC)-containing and CTC-free lyophilised porcine liver, kidney and muscle produced under the European Commission's Standards Measurements and Testing (SMT) programme. The aim of the certification programme was to determine accurately and precisely the concentration of CTC and 4-epi-chlortetracycline (epi-CTC) contained in the RMs. A multi-laboratory approach was used to certify analyte concentrations. Participants (n = 19) were instructed to strictly adhere to previously established guidelines. Following the examination of analytical performance criteria, statistical manipulation of results submitted by 13 laboratories, (6 withdrew) allowed an estimate to be made of the true value of the analyte content. The Nalimov test was used for detection of outlying results. The Cochran and Bartlett tests were employed for testing the homogeneity of variances. The normality of results distribution was tested according to the Kolmogorov-Smirnov-Lilliefors test. One-way analysis of variance (ANOVA) was employed to calculate the within and between-laboratory standard deviations, the overall mean and confidence interval for the CTC and epi-CTC content of each of the RMs. Certified values were within or very close to the target concentration ranges specified in the SMT contract. These studies have demonstrated the successful production and certification of CTC-containing and CTC-free porcine RMs.

Non-invasive measurements of exhaled NO and CO associated with methacholine responses in mice

PubMed Central

Sethi, Jigme M; Choi, Augustine MK; Calhoun, William J; Ameredes, Bill T

2008-01-01

Background Nitric oxide (NO) and carbon monoxide (CO) in exhaled breath are considered obtainable biomarkers of physiologic mechanisms. Therefore, obtaining their measures simply, non-invasively, and repeatedly, is of interest, and was the purpose of the current study. Methods Expired NO (ENO) and CO (ECO) were measured non-invasively using a gas micro-analyzer on several strains of mice (C57Bl6, IL-10-/-, A/J, MKK3-/-, JNK1-/-, NOS-2-/- and NOS-3-/-) with and without allergic airway inflammation (AI) induced by ovalbumin systemic sensitization and aerosol challenge, compared using independent-sample t-tests between groups, and repeated measures analysis of variance (ANOVA) within groups over time of inflammation induction. ENO and ECO were also measured in C57Bl6 and IL-10-/- mice, ages 8–58 weeks old, the relationship of which was determined by regression analysis. S-methionyl-L-thiocitrulline (SMTC), and tin protoporphyrin (SnPP) were used to inhibit neuronal/constitutive NOS-1 and heme-oxygenase, respectively, and alter NO and CO production, respectively, as assessed by paired t-tests. Methacholine-associated airway responses (AR) were measured by the enhanced pause method, with comparisons by repeated measures ANOVA and post-hoc testing. Results ENO was significantly elevated in naïve IL-10-/- (9–14 ppb) and NOS-2-/- (16 ppb) mice as compared to others (average: 5–8 ppb), whereas ECO was significantly higher in naïve A/J, NOS-3-/- (3–4 ppm), and MKK3-/- (4–5 ppm) mice, as compared to others (average: 2.5 ppm). As compared to C57Bl6 mice, AR of IL-10-/-, JNK1-/-, NOS-2-/-, and NOS-3-/- mice were decreased, whereas they were greater for A/J and MKK3-/- mice. SMTC significantly decreased ENO by ~30%, but did not change AR in NOS-2-/- mice. SnPP reduced ECO in C57Bl6 and IL-10-/- mice, and increased AR in NOS-2-/- mice. ENO decreased as a function of age in IL-10-/- mice, remaining unchanged in C57Bl6 mice. Conclusion These results are consistent with the ideas that: 1) ENO is associated with mouse strain and knockout differences in NO production and AR, 2) alterations of ENO and ECO can be measured non-invasively with induction of allergic AI or inhibition of key gas-producing enzymes, and 3) alterations in AR may be dependent on the relative balance of NO and CO in the airway. PMID:18505586

ACUTE TO CHRONIC ESTIMATION SOFTWARE FOR WINDOWS

EPA Science Inventory

Chronic No-Observed Effect Concentrations (NOEC) are commonly determined by either using acute-to-chronic ratios or by performing an ANOVA on chronic test data; both require lengthy and expensive chronic test results. Acute-to-Chronic Estimation (ACE) software was developed to p...

Effect of tooth brushing on gloss retention and surface roughness of five bulk-fill resin composites.

PubMed

O'Neill, Catherine; Kreplak, Laurent; Rueggeberg, Frederick A; Labrie, Daniel; Shimokawa, Carlos Alberto Kenji; Price, Richard Bengt

2018-01-01

To determine the effects of tooth brushing on five bulk-fill resin based composites (RBCs). Ten samples of Filtek Supreme Enamel (control), Filtek One Bulk Fill, Tetric EvoCeram Bulk Fill, SonicFill 2, SDR flow+, and Admira Fusion X-tra were light cured for 20 seconds using the Valo Grand curing light. After 24 hours storage in air at 37°C, specimens were brushed in a random order using Colgate OpticWhite dentifrice and a soft toothbrush. Surface gloss was measured prior to brushing, after 5,000, 10,000 and 15,000 back and forth brushing cycles. Surface roughness was measured after 15,000 brushing cycles using atomic force microscopy (AFM) and selected scanning electron microscope (SEM) images were taken. The data was examined using ANOVA and pair-wise comparisons using Scheffe's post-hoc multiple comparison tests (α = 0.05). Surface gloss decreased and the surface roughness increased after brushing. Two-way ANOVA showed that both the RBC and the number of brushing cycles had a significant negative effect on the gloss. One-way ANOVA showed that the RBC had a significant effect on the roughness after 15,000 brushing cycles. For both gloss and roughness, brushing had the least effect on the nano-filled control and nano-filled bulk-fill RBC, and the greatest negative effect on Admira Fusion X-tra. The SEM images provided visual agreement. There was an excellent linear correlation (R 2  = 0.98) between the logarithm of the gloss and roughness. After brushing, the bulk-fill RBCs were all rougher than the control nano-filled RBC. The nano-filled bulk-fill RBC was the least affected by brushing. Bulk-fill RBCs lose their gloss faster and become rougher than the nanofilled conventional RBC, Filtek Supreme Ultra. The nanofilled bulk-fill RBC was the least affected by tooth brushing. © 2017 Wiley Periodicals, Inc.

Uncertainty Analysis of Historical Hurricane Data

NASA Technical Reports Server (NTRS)

Green, Lawrence L.

2007-01-01

An analysis of variance (ANOVA) study was conducted for historical hurricane data dating back to 1851 that was obtained from the U. S. Department of Commerce National Oceanic and Atmospheric Administration (NOAA). The data set was chosen because it is a large, publicly available collection of information, exhibiting great variability which has made the forecasting of future states, from current and previous states, difficult. The availability of substantial, high-fidelity validation data, however, made for an excellent uncertainty assessment study. Several factors (independent variables) were identified from the data set, which could potentially influence the track and intensity of the storms. The values of these factors, along with the values of responses of interest (dependent variables) were extracted from the data base, and provided to a commercial software package for processing via the ANOVA technique. The primary goal of the study was to document the ANOVA modeling uncertainty and predictive errors in making predictions about hurricane location and intensity 24 to 120 hours beyond known conditions, as reported by the data set. A secondary goal was to expose the ANOVA technique to a broader community within NASA. The independent factors considered to have an influence on the hurricane track included the current and starting longitudes and latitudes (measured in degrees), and current and starting maximum sustained wind speeds (measured in knots), and the storm starting date, its current duration from its first appearance, and the current year fraction of each reading, all measured in years. The year fraction and starting date were included in order to attempt to account for long duration cyclic behaviors, such as seasonal weather patterns, and years in which the sea or atmosphere were unusually warm or cold. The effect of short duration weather patterns and ocean conditions could not be examined with the current data set. The responses analyzed were the storm latitude, longitude and intensity, as recorded in the data set, 24 or 120 hours beyond the current state. Several ANOVA modeling schemes were examined. Two forms of validation were used: 1) comparison with official hurricane prediction performance metrics and 2) cases studies conducted on hurricanes from the 2005 season, which were not included within the model construction and ANOVA assessment. In general, the ANOVA technique did not perform as well as the established official prediction performance metrics published by NOAA; still, the technique did remarkably well in this demonstration with a difficult data set and could probably be made to perform better with more knowledge of hurricane development and dynamics applied to the problem. The technique provides a repeatable prediction process that eliminates the need for judgment in the forecast.

Defining the Molecular Actions of Dietary Fatty Acids in Breast Cancer: Selective Modulation of Peroxisome Proliferator-Activated Receptor Gamma

DTIC Science & Technology

2006-12-01

hypothesis testing (ANOVA) using icrosoft Excel v10.0 atα= 0.05 significance threshold. Fol- owing ANOVA, Fisher’s least significant difference, LSD , air...critical value (α= 0.05) ound in the t distribution. If the average absolute difference etween any two groups was greater than the LSD critical alue...cIntyre, T.M., Pontsler, A.V., Silva, A.R., St Hilaire, A., Xu, Y., Hin- shaw , J.C., Zimmerman, G.A., Hama, K., Aoki, J., Arai, H., Prestwich, G.D

Comparison of an indirect tri-planar myofascial release (MFR) technique and a hot pack for increasing range of motion.

PubMed

Kain, Jay; Martorello, Laura; Swanson, Edward; Sego, Sandra

2011-01-01

The purpose of the randomized clinical study was to scientifically assess which intervention increases passive range of motion most effectively: the indirect tri-planar myofascial release (MFR) technique or the application of hot packs for gleno-humeral joint flexion, extension, and abduction. A total of 31 participants from a sample of convenience were randomly assigned to examine whether or not MFR was as effective in increasing range of motion as hot packs. The sample consisted of students at American International College. Students were randomly assigned to two groups: hot pack application (N=13) or MFR technique (N=18). The independent variable was the intervention, either the tri-planar MFR technique or the hot pack application. Group one received the indirect tri-planar MFR technique once for 3min. Group two received one hot pack application for 20min. The dependent variables, passive gleno-humeral shoulder range of motion in shoulder flexion, shoulder extension, and shoulder abduction, were taken pre- and post-intervention for both groups. Data was analyzed through the use of a two-way factorial design with mixed-factors ANOVA. Prior to conducting the study, inter-rater reliability was established using three testers for goniometric measures. A 2 (type of intervention: hot packs or MFR) by 2 (pre-test or post-test) mixed-factors ANOVA was calculated. Significant increases in range of motion were found for flexion, extension and abduction when comparing pre-test scores to post-test scores. The results of the ANOVA showed that for passive range of motion no differences were found for flexion, extension and abduction between the effectiveness of hot packs and MFR. For each of the dependent variables measured, MFR was shown to be as effective as hot packs in increasing range of motion, supporting the hypothesis. Since there was no significant difference between the types of intervention, both the hot pack application and the MFR technique were found to be equally effective in increasing passive range of motion of the joint in flexion, extension, and abduction of the gleno-humeral joint. The indirect tri-planar intervention could be considered more effective as an intervention in terms of time spent with a patient and the number of patients seen in a 20-min period. No equipment is required to carry out the MFR intervention, whereby using a hot pack requires the hot pack, towels, and a hydraculator unit with the use of the indirect tri-planar intervention, a therapist could treat four to five patients in the time it would take for one standard hot pack treatment of 20min, less the hands-on intervention of the therapist. Copyright © 2009 Elsevier Ltd. All rights reserved.

Effect of nanofillers' size on surface properties after toothbrush abrasion.

PubMed

Cavalcante, Larissa M; Masouras, Konstantinos; Watts, David C; Pimenta, Luiz A; Silikas, Nick

2009-02-01

To investigate the effect of filler-particle size of experimental and commercial resin composites, undergoing toothbrush abrasion, on three surface properties: surface roughness (SR), surface gloss (G) and color stability (CS). Four model (Ivoclar/Vivadent) and one commercial resin composite (Tokuyama) with varying filler-size from 100-1000 nm were examined. Six discs (10 mm x 2 mm) from each product were prepared and mechanically polished. The samples were then submitted to 20,000 brushing strokes in a toothbrush abrasion machine. SR parameters (Ra, Rt and RSm), G, and CS were measured before and after toothbrush abrasion. Changes in SR and G were analyzed by 2-way ANOVA, with Bonferroni post hoc test. CS values were submitted to one-way ANOVA and Bonferroni post hoc test (alpha=0.05). Initial G values ranged between 73-87 gloss units (GU) and were reduced after toothbrush abrasion to a range of 8-64 GU. Toothbrush abrasion resulted in significant modifications in SR and G amongst the materials tested, attributed to filler sizes. There was statistically significant difference in color (delta E* ranged from 0.38-0.88). Filler size did not affect color stability. Toothbrush abrasion resulted in rougher and matte surfaces for all materials tested. Although the individual differences in surface roughness among filler sizes were not always significant, the correlation showed a trend that larger filler sizes resulted in higher surface roughness after abrasion for the SR parameters Ra and Rt (r = 0.95; r = 0.93, respectively). RSm showed an increase after toothbrush abrasion for all resin composites, however no significant correlation was detected (r = 0.21).There was a significant correlation between G and Ra ratios (r = - 0.95).

Effect of one-step polishing system on the color stability of nanocomposites.

PubMed

Alawjali, S S; Lui, J L

2013-08-01

This study was to compare the effect of three different one-step polishing systems on the color stability of three different types of nanocomposites after immersion in coffee for one day and seven days and determine which nanocomposite material has the best color stability following polishing with each of the one-step polishing system. The nanocomposites tested were Tetric EvoCeram, Grandio and Herculite Précis. A total of 120 discs (40/nanocomposite, 8mm×2mm) were fabricated. Ten specimens for each nanocomposite cured under Mylar strips served as the control. The other specimens were polished with OptraPol, OneGloss and Occlubrush immersed in coffee (Nescafé) up to seven days. Color measurements were made with a spectrophotometer at baseline and after one and seven days. Two way repeated measure ANOVA, two way ANOVA and Bonferroni tests were used for statistical analyses (P<0.05). The immersion time was a significant factor in the discoloration of the nanocomposites. The effect of three one-step polishing systems on the color stability was also significant. The color change values of the materials cured against Mylar strips were the greatest. The lowest mean color change values were from the Occlubrush polished groups. The effect of the three different types of nanocomposite on the color change was significant. The highest color change values were with Tetric EvoCeram groups. The lowest color change values were with Herculite Précis groups. The color change of nanocomposite resins is affected by the type of composite, polishing procedure and the period of immersion in the staining agent. Copyright © 2012 Elsevier Ltd. All rights reserved.

Development of a Vitality Scan related to workers' sustainable employability: a study assessing its internal consistency and construct validity.

PubMed

Brouwers, Livia A M; Engels, Josephine A; Heerkens, Yvonne F; van der Beek, Allard J

2015-06-16

Most validated sustainable employability questionnaires are extensive and difficult to obtain. Our objective was to develop a usable and valid tool, a Vitality Scan, to determine possible signs of stagnation in one's functioning related to sustainable employability and to establish the instrument's internal consistency and construct validity. A literature review was performed and expert input was obtained to develop an online survey of 31 items. A sample of 1722 Dutch employees was recruited. Internal consistency was assessed by Cronbach's alpha. The underlying theoretical concepts were extracted by factor analysis using a principal component method. For construct validity, a priori hypotheses were defined for expected differences between known subgroups: 1) older workers would report more stagnation than younger workers, and 2) less educated workers would report more problems than the highly educated ones. Both hypotheses were statistically tested using ANOVA. Internal consistency measures and factor analysis resulted in five subscales with acceptable to good reliability (Cronbach's alpha 0.72-0.87). These subscales included: balance and competence, motivation and involvement, resilience, mental and physical health, and social support at work. Three items were removed following these analyses. In accordance with our a priori hypothesis 1, the ANOVA showed that older workers reported the most problems, while younger workers reported the least problems. However, hypothesis 2 was not confirmed: no significant differences were found for education level. The developed Vitality Scan - with the 28 remaining items - showed good measurement properties. It is applicable as a user-friendly, evaluative instrument for worker's sustainable employability. The scan's value for determining whether or not the employee is at risk for a decrease in functioning during present and future work, should be further tested.

Simultaneous coffee caffeine intake and sleep deprivation alter glucose homeostasis in Iranian men: a randomized crossover trial.

PubMed

Rasaei, Behrouz; Talib, Ruzita Abd; Noor, Mohd Ismail; Karandish, Majid; Karim, Norimah A

2016-12-01

Sleep deprivation and coffee caffeine consumption have been shown to affect glucose homeostasis separately, but the combined effects of these two variables are unknown. Forty-two healthy Iranian men, aged 20-40 years old, were assigned to three groups in a randomised crossover trial involving three treatments with two-week washout periods. Subjects were moderate coffee consumers (<=3 cups/day), and had a Pittsburgh Sleep Quality Index <=5. Each treatment involved three nights of deprived sleep (4 hrs. in bed) plus 3×150 cc/cup of boiled water (BW treatment), decaffeinated coffee (DC treatment, without sugar, 99.9% caffeine-free), and caffeinated coffee (CC treatment, without sugar, 65 mg caffeine/ cup). DC and CC treatments were blinded. At the end of each treatment, fasting serum glucose (using enzyme assays) and insulin (using electrochemiluminescence immunoassay) were measured and, again, two hours after an oral glucose tolerance test (OGTT). Insulin resistance was quantified with the homeostasis model. Repeated measures ANOVA indicated no significant difference between the treatments in fasting serum glucose (p=0.248) or insulin resistance (p=0.079). However, ANOVA demonstrated differences between treatments in fasting serum insulin (p=0.004) and glucose, as well as insulin after OGTT (p<0.001). Pairwise comparisons test (within subjects) showed that the CC treatment yielded higher serum glucose and insulin after OGTT (p<0.001), higher fasting serum insulin (p=0.001), and increased insulin resistance (p=0.039) as compared to the DC treatment. Thus caffeinated coffee was more adverse for glucose homeostasis compared to decaffeinated coffee in individuals who were simultaneously sleep deprived.

Drooling, saliva production, and swallowing in cerebral palsy.

PubMed

Senner, Jill E; Logemann, Jerilyn; Zecker, Steven; Gaebler-Spira, Deborah

2004-12-01

Fourteen participants (six females, eight males) ranging in age from 7 years 11 months to 18 years 2 months (mean 11y 7mo) with a confirmed diagnosis of spastic cerebral palsy (CP) were included in the study. Participants included those who drooled (CP+, n=14); age- and sex-matched children with spastic CP who were dry to mild and never to infrequent droolers (CP-, n=14) as well as typically developing peers (CTRL, n=14) served as controls. Frequency of swallowing was measured by using simultaneous cervical ausculation and videotaping of the head and neck. Saliva production was measured with the Saxon test, a simple gauze-chewing procedure. In addition, Pediatric Evaluation of Disability Inventory (PEDI), Test of Nonverbal Intelligence-3 (TONI-3), dysarthria severity scale, and Gross Motor Function Classification System (GMFCS) scores were obtained for each participant. Both groups of participants with CP tended to swallow less frequently than typically developing participants and tended to produce less saliva than typically developing controls; however, these differences were not statistically significant. No correlation was found between amount of saliva produced and amount drooled (r=0.245). An analysis of variance (ANOVA) conducted on the PEDI functional skills mean scores indicated significant differences between the three groups (F(2,39)=23.522,p<0.0001). Likewise, an ANOVA conducted on the TONI-3 scores revealed statistically significant differences between the three groups (F(2,39)=31.761, p<0.0001). A Spearman's rho correlation indicated that GMFCS scores were not significantly correlated with drooling severity (Spearman's rho correlation=0.3951,p=0.037). Drooling severity was found to be positively correlated with dysarthria severity (Spearman's rho correlation=0.82,p<0.0001). These findings suggest that drooling in patients with CP is related to swallowing difficulties rather than hypersalivation.

Relationship between crown-root angulation (collum angle) of maxillary central incisors in Class II, division 2 malocclusion and lower lip line.

PubMed

Srinivasan, Bhadrinath; Kailasam, Vignesh; Chitharanjan, Arun; Ramalingam, Arthi

2013-01-01

The present study aimed to measure the magnitude of the collum angle (crown-root angulation) of maxillary central incisors present in Class II, division 2 malocclusion and to relate the changes in its magnitude with variations in the lower lip line. A set of 120 conventional lateral cephalograms were selected and divided into three groups of 40 each based on the type of malocclusion presented: Class II, division 2 (group 1); Class II, division 1 (group 2); and Class I (group 3). The collum angle of the maxillary central incisor was measured, and the lower lip line was recorded. Analysis of variance (ANOVA) revealed that the mean collum angle was statistically significantly different in the three groups. The mean collum angle was greatest in Class II, division 2 malocclusion (group 1). The mean collum angles were 3.24 ± 4.69 degrees, 0.95 ± 1.06 degrees, and 1.05 ± 1.50 degrees in groups 1, 2, and 3 respectively. In χ ² test comparison of the location of the lower lip line (incisal, middle, or apical third of the central incisor) among the three groups, the lower lip line was found to contact the middle third of the central incisor most frequently in Class II, division 2 malocclusion. ANOVA followed by Tukey honestly significant difference (HSD) test showed that the mean collum angle is significantly increased when the lower lip is in the middle third (P < .05) of the central incisor. Variations in magnitude of the collum angle with the change in the lower lip line suggest a probable etiologic role of the lower lip line in the development of the collum angle.

Effects of contamination by either blood or a hemostatic agent on the shear bond strength of orthodontic buttons

PubMed Central

Alkis, Huseyin; Turkkahraman, Hakan

2013-01-01

Objective To evaluate the effects of contamination by either blood or a hemostatic agent on the shear bond strength (SBS) of orthodontic buttons. Methods We used 45 freshly extracted, non-carious, impacted third molars that were divided into 3 groups of 15. Each tooth was etched with 37% phosphoric acid gel for 30 s. Human blood or the blood stopper agent was applied to the tooth surface in groups I and II, respectively. Group III teeth were untreated (controls). Orthodontic buttons were bonded to the teeth using light-curing composite resin. After bonding, the SBS of the button was determined using a Universal testing machine. Any adhesive remaining after debonding was assessed and scored according to the modified adhesive remnant index (ARI). ANOVA with post-hoc Tukey's test was used to determine significant differences in SBS and Fisher's exact test, to determine significant differences in ARI scores among groups. Results ANOVA indicated a significant difference between groups (p < 0.001). The highest SBS values were measured in group III (10.73 ± 0.96 MPa). The SBS values for teeth in groups I and II were significantly lower than that of group III (p < 0.001). The lowest SBS values were observed in group I teeth (4.17 ± 1.11 MPa) (p < 0.001). Conclusions Contamination of tooth surfaces with either blood or hemostatic agent significantly decreased the SBS of orthodontic buttons. When the contamination risk is high, it is recommended to use the blood stopper agent when bonding orthodontic buttons on impacted teeth. PMID:23671834

Evaluation of Eye Protection Filters Used with Broad-Spectrum and Conventional LED Curing Lights.

PubMed

Soares, Carlos José; Rodrigues, Monise de Paula; Vilela, Andomar Bruno Fernandes; Rizo, Erick René Cerda; Ferreira, Lorraine Braga; Giannini, Marcelo; Price, Richard Bengt

2017-01-01

The high irradiance and the different emission spectra from contemporary light curing units (LCU) may cause ocular damage. This study evaluated the ability of 15 eye protection filters: 2 glasses, 1 paddle design, and 12 dedicated filters to block out harmful light from a monowave (HP-3M ESPE) and a broad-spectrum (Valo, Ultradent) LED LCU. Using the anterior sensor in the MARC-Patient Simulator (BlueLight Analytics) the irradiance that was delivered through different eye protection filters was measured three times. The LCUs delivered a similar irradiance to the top of the filter. The mean values of the light that passed through the filters as percent of the original irradiance were analyzed using two-way ANOVA followed by Tukey test (a= 0.05). The emission spectra from the LCUs and through the filters were also obtained. Two-way ANOVA showed that the interaction between protective filters and LCUs significantly influenced the amount of light transmitted (p< 0.001). Tukey test showed that the amount of light transmitted through the protective filters when using the HP-3M-ESPE was significantly greater compared to when using the Valo, irrespective of the protective filter tested. When using the HP-3M-ESPE, the Glasses filter allowed significantly more light through, followed by XL 3000, ORTUS, Google Professional, Gnatus filters. The Valo filter was the most effective at blocking out the harmful light. Some protective filters were less effective at blocking the lower wavelengths of light (<420 nm). However, even in the worst scenario, the filters were able to block at least 97% of the irradiance.

Prosthetic outcome, patient complaints, and nutritional effects on elderly patients with magnet-retained, implant-supported overdentures--a 1-year report.

PubMed

Khoo, Huan Ding; Chai, John; Chow, Tak Wah

2013-01-01

To study the changes in treatment outcomes of complete dentures and magnet-retained, implant-supported overdentures in a group of elderly patients. In this nonrandomized trial, 43 edentulous patients (14 men and 29 women) were fitted with complete dentures followed by implant-supported mandibular overdenture in a sequential model. Treatment outcomes used for analysis included objective assessment of denture quality (Woelfel's index), patient satisfaction, nutritional status, body mass index (BMI), and serum albumin level. The McNemar test was used to determine if significant differences in the Woelfel's index and nutritional status existed at different treatment phases. Repeated measures ANOVA and multiple pairwise comparison tests were used to analyze patient satisfaction. BMI status and serum albumin level at different treatment phases were analyzed with one-way ANOVA and Tukey post hoc test. At the 1-year follow-up, significant improvements were recorded for the objective assessment of denture quality and patient complaints (P < .05). No subject was found to be malnourished at pretreatment and in subsequent treatment phases. BMI and serum albumin level were not significantly different at different treatment phases (P > .05) CONCLUSIONS: The present study demonstrated that in elderly patients with stable health and nutritional status, complete dentures made in a university clinic brought about overall improvement in denture quality and reduction in denture complaint score. Insertion of mandibular implant-supported overdentures further improved the mandibular denture quality and reduced the mandibular denture complaint score. In this group of patients, no improvement in BMI, serum albumin value, and nutritional status were documented.

The effect of ligation on the load deflection characteristics of nickel titanium orthodontic wire.

PubMed

Kasuya, Shugo; Nagasaka, Satoshi; Hanyuda, Ai; Ishimura, Sadao; Hirashita, Ayao

2007-12-01

This study examined the effect of ligation on the load-deflection characteristics of nickel-titanium (NiTi) orthodontic wire. A modified three-point bending system was used for bending the NiTi round wire, which was inserted and ligated in the slots of three brackets, one of which was bonded to each of the three bender rods. Three different ligation methods, stainless steel ligature (SSL), slot lid (SL), and elastomeric ligature (EL), were employed, as well as a control with neither bracket nor ligation (NBL). The tests were repeated five times under each condition. Comparisons were made of load-deflection curve, load at maximum deflection of 2,000 microm, and load at a deflection of 1,500 microm during unloading. Analysis of Variance (ANOVA) and Dunnett's test were conducted to determine method difference (alpha = 0.05). The interaction between deflection and ligation was tested, using repeated-measures ANOVA (alpha = 0.05). The load values of the ligation groups were two to three times greater than the NBL group at a deflection of 1,500 microm during unloading: 4.37 N for EL, 3.90 N for SSL, 3.02 N for SL, and 1.49 N for NBL (P < 0.01). For the EL, a plateau region disappeared in the unloading curve. SL showed the smallest load. The ligation of the bracket wire may make NiTi wire exhibit a significantly heavier load than that traditionally expected. NiTi wire exhibited the majority of its true superelasticity with SL, whereas EL may act as a restraint on its superelasticity.

Diet and density dependent competition affect larval performance and oviposition site selection in the mosquito species Aedes albopictus (Diptera: Culicidae)

PubMed Central

2012-01-01

Background Oviposition-site choice is an essential component of the life history of all mosquito species. According to the oviposition-preference offspring-performance (P-P) hypothesis, if optimizing offspring performance and fitness ensures high overall reproductive fitness for a given species, the female should accurately assess details of the heterogeneous environment and lay her eggs preferentially in sites with conditions more suitable to offspring. Methods We empirically tested the P-P hypothesis using the mosquito species Aedes albopictus by artificially manipulating two habitat conditions: diet (measured as mg of food added to a container) and conspecific density (CD; number of pre-existing larvae of the same species). Immature development (larval mortality, development time to pupation and time to emergence) and fitness (measured as wing length) were monitored from first instar through adult emergence using a factorial experimental design over two ascending gradients of diet (2.0, 3.6, 7.2 and 20 mg food/300 ml water) and CD (0, 20, 40 and 80 larvae/300 ml water). Treatments that exerted the most contrasting values of larval performance were recreated in a second experiment consisting of single-female oviposition site selection assay. Results Development time decreased as food concentration increased, except from 7.2 mg to 20.0 mg (Two-Way CR ANOVA Post-Hoc test, P > 0.1). Development time decreased also as conspecific density increased from zero to 80 larvae (Two-Way CR ANOVA Post-Hoc test, P < 0.5). Combined, these results support the role of density-dependent competition for resources as a limiting factor for mosquito larval performance. Oviposition assays indicated that female mosquitoes select for larval habitats with conspecifics and that larval density was more important than diet in driving selection for oviposition sites. Conclusions This study supports predictions of the P-P hypothesis and provides a mechanistic understanding of the underlying factors driving mosquito oviposition site selection. PMID:23044004

Effects of 6 months of aging in water on hardness and surface roughness of two microhybrid dental composites.

PubMed

de Moraes, Rafael Ratto; Marimon, José Laurindo Machado; Schneider, Luis Felipe; Sinhoreti, Mário Alexandre Coelho; Correr-Sobrinho, Lourenço; Bueno, Márcia

2008-06-01

This study assessed the effect of 6 months of aging in water on surface roughness and surface/subsurface hardness of two microhybrid resin composites. Filtek Z250 and Charisma were tested. Cylindrical specimens were obtained and stored in distilled water for 24 hours or 6 months, at 37 degrees C. For Knoop hardness evaluation, the specimens were transversely wet-flattened, and indentations were made on surface and subsurface layers. Data were submitted to three-way ANOVA and Tukey's test (alpha < or = 0.05). Surface roughness baseline measurements were made at 24 hours and repeated after 6 months of storage. Data were submitted to repeated measures ANOVA and Tukey's test (alpha < or = 0.05). Surface hardness (KHN, kg/mm(2)) means (+/- standard deviation) ranged from 55 +/- 1 to 49 +/- 4 for Z250 and from 50 +/- 2 to 41 +/- 3 for Charisma, at 24 hours and 6 months, respectively. Subsurface means ranged from 58 +/- 2 to 61 +/- 3 for Z250 and from 50 +/- 1 to 54 +/- 2 for Charisma, at 24 hours and 6 months. For both composites, the aged specimens presented significantly softer surfaces (p < 0.01). For the subsurface hardness, alteration after storage was detected only for Charisma, which presented a significant rise in hardness (p < 0.01). Z250 presented significantly harder surface and subsurface layers in comparison with Charisma. Surface roughness (Ra, mum) means ranged from 0.07 +/- 0.00 to 0.07 +/- 0.01 for Z250 and from 0.06 +/- 0.01 to 0.07 +/- 0.01 for Charisma, at 24 hours and 6 months, respectively. For both composites, no significant roughness alteration was detected during the study (p= 0.386). The 6-month period of storage in water presented a significant softening effect on the surfaces of the composites, although no significant deleterious alteration was detected for the subsurface hardness. In addition, the storage period had no significant effect on the surface roughness of the materials.

Initial testing of an instrument to measure teacher identity in physicians.

PubMed

Starr, Susan; Haley, Heather-Lyn; Mazor, Kathleen M; Ferguson, Warren; Philbin, Mary; Quirk, Mark

2006-01-01

A previous study described 7 elements of teacher identity: intrinsic satisfaction from teaching, knowledge and skill about teaching, belonging to a community of teachers, receiving rewards for teaching, believing that being a doctor means being a teacher, feeling a responsibility to teach, and sharing clinical expertise. To conduct the initial testing of an instrument to measure the 7 elements of teacher identity in clinical educators and to consider the potential applications of such an instrument. A 37-item questionnaire was mailed to 153 preceptors of preclinical students. Categories reflected the elements of teacher identity listed here. Demographic data were collected. Means, alphas, ANOVAs, and paired t tests were calculated. Of 153 preceptors, 127 (83%) completed the questionnaire. Cronbach's alpha for the overall scale and several subscales were high. Salaried physicians and those who had completed a faculty development program scored significantly higher on several subscales than physicians who volunteered to teach or who did not have faculty development. This study provides preliminary evidence that teacher identity can be measured and that preceptors do not respond as a homogeneous group. Assessing teacher identity may be helpful to medical schools looking to identify and support physicians who teach.

Significance of acceleration period in a dynamic strength testing study.

PubMed

Chen, W L; Su, F C; Chou, Y L

1994-06-01

The acceleration period that occurs during isokinetic tests may provide valuable information regarding neuromuscular readiness to produce maximal contraction. The purpose of this study was to collect the normative data of acceleration time during isokinetic knee testing, to calculate the acceleration work (Wacc), and to determine the errors (ERexp, ERwork, ERpower) due to ignoring Wacc during explosiveness, total work, and average power measurements. Seven male and 13 female subjects attended the test by using the Cybex 325 system and electronic stroboscope machine for 10 testing speeds (30-300 degrees/sec). A three-way ANOVA was used to assess gender, direction, and speed factors on acceleration time, Wacc, and errors. The results indicated that acceleration time was significantly affected by speed and direction; Wacc and ERexp by speed, direction, and gender; and ERwork and ERpower by speed and gender. The errors appeared to increase when testing the female subjects, during the knee flexion test, or when speed increased. To increase validity in clinical testing, it is important to consider the acceleration phase effect, especially in higher velocity isokinetic testing or for weaker muscle groups.

An Ergonomic Evaluation of Aircraft Pilot Seats

NASA Astrophysics Data System (ADS)

Andrade, Yolanda Nicole

Seat comfort has become increasingly important in today's society as we spend more time at consoles, instrument panels, or just online. However, seat comfort is hard to define and difficult to measure. Several measures both objective and subjective were used to evaluate seat comfort in commercially available average pilot seats. Three pilot seats, which had the same material and similar adjustments but different physical attributes, and a universal classroom seat, with different material and no adjustments, were compared by 20 volunteers using subjective and objective measures in a Latin square controlled repeated measures design. A Friedman's test was used to determine that both the comfort questionnaire and the body-map rating results were able to discriminate objective comfort levels between the seats. One-way repeated measures ANOVA tests were used to analyze both the objective tests, actigraph and pressure pad data. All results indicated that one seat was clearly the most comfortable and another, the classroom seat was clearly the most uncomfortable seat. Furthermore, the overall comments per seat were compiled and compared to Fazlollahtabar's 2010) predictive automobile seat comfort theory to determine which factors influence comfort perception. The use of both subjective and objective data can better distinguish comfort from one seat over the other. These results have implications for future tests of seats that will be used for long durations. Limitations and future recommendations are discussed later in the paper. An interesting finding may explain why pressure pad data are typically seemingly at odds with subjective measures of seat comfort.

The Effects of Test Trial and Processing Level on Immediate and Delayed Retention

ERIC Educational Resources Information Center

Chang, Sau Hou

2017-01-01

The purpose of the present study was to investigate the effects of test trial and processing level on immediate and delayed retention. A 2 × 2 × 2 mixed ANOVAs was used with two between-subject factors of test trial (single test, repeated test) and processing level (shallow, deep), and one within-subject factor of final recall (immediate,…

[Procedural learning and anxiolytic effects: electroencephalographic, motor and attentional measures].

PubMed

Portella, Claudio Elidio; Silva, Julio Guilherme; Bastos, Victor Hugo; Machado, Dionis; Cunha, Marlo; Cagy, Maurício; Basile, Luis; Piedade, Roberto; Ribeiro, Pedro

2006-06-01

The objective of the present study was to evaluate attentional, motor and electroencephalographic (EEG) parameters during a procedural task when subjects have ingested 6 mg of bromazepam. The sample consisted of 26 healthy subjects, male or female, between 19 and 36 years of age. The control (placebo) and experimental (bromazepam 6 mg) groups were submitted to a typewriting task in a randomized, double-blind design. The findings did not show significant differences in attentional and motor measures between groups. Coherence measures (qEEG) were evaluated between scalp regions, in theta, alpha and beta bands. A first analysis revealed a main effect for condition (Anova 2-way--condition versus blocks). A second Anova 2-way (condition versus scalp regions) showed a main effect for both factors. The coherence measure was not a sensitive tool at demonstrating differences between cortical areas as a function of procedural learning.

Microshear Bond Strength of OptiBond All-in-One Self-adhesive Agent to Er:YAG Laser Treated Enamel After Thermocycling and Water Storage.

PubMed

Kasraei, Shahin; Yarmohammadi, Ebrahim; Ghazizadeh, Mohammad Vahid

2016-01-01

Introduction: This study aimed to compare the microshear bond strength of composite to enamel treated with Erbium-Doped Yttrium Aluminum Garnet (Er:YAG) laser using a self-etch one step bonding agent. Methods: Seventy-six enamel surfaces were prepared from 38 sound human third molar teeth. Specimens were randomly divided into four groups of 18. The enamel surface in half the specimens was irradiated with Er:YAG laser. One extra specimen from each group was evaluated under a scanning electron microscope (SEM). Composite micro-cylinders were bonded to the specimen surfaces using OptiBond All-In-One (OB) adhesive agent and stored in distilled water for 24 hours. Half the specimens were thermocycled (2000 cycles) and stored in distilled water at 37°C for three months (TW). The microshear bond strength of composite to enamel was measured using a universal testing machine at a crosshead speed of 1 mm/min. The fractured surfaces were evaluated under a stereomicroscope at ×40 magnification to determine the mode of failure. Data were analyzed using repeated measures analysis of variance (ANOVA) and t test. Results: The mean values (±standard deviation) were 17.96 ± 2.92 MPa in OB group, 22.29 ± 4.25 MPa in laser + OB group, 18.11 ± 3.52 MPa in laser + OB + TW group and 9.42 ± 2.47 MPa in OB + TW group. Repeated measures ANOVA showed that laser irradiation increased the microshear bond strength ( P < 0.001). Bond strength decreased when the samples were thermocycled and stored for three months ( P < 0.001). The interaction effect of water storage and laser treatment on bond strength was significant ( P < 0.05). Conclusion: Enamel surface preparation with Er:YAG laser is recommended to enhance the durability of the bond of self-etch bonding systems to enamel.

Microshear Bond Strength of OptiBond All-in-One Self-adhesive Agent to Er:YAG Laser Treated Enamel After Thermocycling and Water Storage

PubMed Central

Kasraei, Shahin; Yarmohammadi, Ebrahim; Ghazizadeh, Mohammad Vahid

2016-01-01

Introduction: This study aimed to compare the microshear bond strength of composite to enamel treated with Erbium-Doped Yttrium Aluminum Garnet (Er:YAG) laser using a self-etch one step bonding agent. Methods: Seventy-six enamel surfaces were prepared from 38 sound human third molar teeth. Specimens were randomly divided into four groups of 18. The enamel surface in half the specimens was irradiated with Er:YAG laser. One extra specimen from each group was evaluated under a scanning electron microscope (SEM). Composite micro-cylinders were bonded to the specimen surfaces using OptiBond All-In-One (OB) adhesive agent and stored in distilled water for 24 hours. Half the specimens were thermocycled (2000 cycles) and stored in distilled water at 37°C for three months (TW). The microshear bond strength of composite to enamel was measured using a universal testing machine at a crosshead speed of 1 mm/min. The fractured surfaces were evaluated under a stereomicroscope at ×40 magnification to determine the mode of failure. Data were analyzed using repeated measures analysis of variance (ANOVA) and t test. Results: The mean values (±standard deviation) were 17.96 ± 2.92 MPa in OB group, 22.29 ± 4.25 MPa in laser + OB group, 18.11 ± 3.52 MPa in laser + OB + TW group and 9.42 ± 2.47 MPa in OB + TW group. Repeated measures ANOVA showed that laser irradiation increased the microshear bond strength (P < 0.001). Bond strength decreased when the samples were thermocycled and stored for three months (P < 0.001). The interaction effect of water storage and laser treatment on bond strength was significant (P < 0.05). Conclusion: Enamel surface preparation with Er:YAG laser is recommended to enhance the durability of the bond of self-etch bonding systems to enamel. PMID:28144434

Anchorage onto deciduous teeth: effectiveness of early rapid maxillary expansion in increasing dental arch dimension and improving anterior crowding.

PubMed

Mutinelli, Sabrina; Manfredi, Mario; Guiducci, Antonio; Denotti, Gloria; Cozzani, Mauro

2015-01-01

Anchorage onto permanent dentition is a common procedure in rapid maxillary expansion. However, replacing first permanent molars with the second deciduous molars seems to be an option to reduce some negative side effects during orthodontic treatment. The purpose of this study was to evaluate the dental effect of rapid maxillary expansion with anchorage exclusively onto deciduous teeth performed in the first period of transition. Twenty patients with a lateral cross-bite treated exclusively by a Haas expander in early mixed dentition were retrospectively analyzed before treatment, at appliance removal, and at 21 months out of retention. The sagittal and transverse dimensions, together with the inter-canine arch and irregularity index, were digitally measured on scanned images of dental casts. The patients were compared with three balanced control groups (in total, 60 individuals) matched for gender. Two control groups had the same canine dental class as the treated group at T1, were in the inter-transitional period, and either had or lacked a lateral cross-bite. The last control group was comprised of adolescents in permanent dentition with a dental class I. The statistical analysis was performed by means of repeated-measures ANOVA for paired data and one-way ANOVA, the Kruskal-Wallis test, and the Mann-Whitney test for independent measures (α-level p < 0.05). At the end of follow-up (inter-transitional period of dentition), the dental arch dimensions of treated patients were similar to those of adolescents with a dental class I and significantly wider than those of patients with a lateral cross-bite. Also, the anterior irregularity index was lower among patients who had undergone expansion treatments than in all untreated study participants. The Haas expander anchored to the deciduous teeth is effective in increasing the dental arch width in patients with a lateral cross-bite. The dimensions of the dental arch were modified earlier toward the values of the permanent dentition.

The impact of three instructional styles of teaching physics on students' achievement and attitudes

NASA Astrophysics Data System (ADS)

Al-Arfaj, Maher Mohammed

The aim of this study was to investigate the impact of three instructional styles (traditional teaching, problem-based instruction, and teaching by demonstration) of teaching physics on students' attitudes and achievement. The sample consisted of 106 Saudi students in three physics classes in the second semester of the academic year 1998--1999. Three instruments were used in collecting the data for both quantitative and qualitative parts of the study. For the quantitative part, the researcher developed and pilot tested a 35-item questionnaire with versions to measure students' attitudes before the start of the experiment and then to measure students' attitudes toward the method of teaching. In addition, the researcher developed a 12-item achievement test to measure students gain scores which was administered at the beginning and the end of the treatment. For the qualitative part, the researcher constructed an interview guide consisting of five-open ended questions. The questions were geared to discover students' attitudes toward the implemented instructional style, and if this instructional style assisted them to acquire a good understanding of the studied unit. In the quantitative part, the results showed a significant correlation between students' attitudes toward the method of teaching and their achievement on the posttests. Furthermore, the findings from the one-way ANOVA indicated that there was a significant difference among the three groups in terms of achievement. The mean of achievement gain scores was highest for the problem-based group, followed by the group that was taught by demonstration, and then the traditional teaching group. The findings from the ANOVA indicated that there was also no significant difference between the three groups in terms of attitudes. In the qualitative part, the answers of the five questions revealed four themes: attitudes toward the method of teaching, reasons for liking or disliking the method of teaching, methods of teaching role and academic achievement, and suggestions for improving the method of teaching.

A prospective study of cognitive fluency and originality in children exposed in utero to carbamazepine, lamotrigine, or valproate monotherapy.

PubMed

McVearry, Kelly M; Gaillard, William D; VanMeter, John; Meador, Kimford J

2009-12-01

To investigate the differential effects of fetal exposure to antiepileptic drugs (AEDs) on cognitive fluency and flexibility in a prospective sample of children. This substudy of the Neurodevelopmental Effects of Antiepileptic Drugs investigation enrolled pregnant women with epilepsy on AED monotherapy (carbamazepine, lamotrigine, and valproate). Blinded to drug exposure, 54 children were tested for ability to generate ideas in terms of quantity (fluency/flexibility) and quality (originality). Forty-two children met inclusion criteria (mean age=4.2 years, SD=0.5) for statistical analyses of drug exposure group differences. Fluency was lower in the valproate group (mean=76.3, SD=7.53) versus the lamotrigine (mean=93.76, SD=13.5, ANOVA P<0.0015) and carbamazepine (mean=95.5, SD=18.1, ANOVA P<0.003) groups. Originality was lower in the valproate group (mean=84.2, SD=3.23) versus the lamotrigine (mean=103.1, SD=14.8, ANOVA P<0.002) and carbamazepine (mean=99.4, SD=17.1, ANOVA P<0.01) groups. These results were not explained by factors other than AED exposure. Children prenatally exposed to valproate demonstrate impaired fluency and originality compared with children exposed to lamotrigine and carbamazepine.

Validity and Reliability of a Portable Balance Tracking System, BTrackS, in Older Adults.

PubMed

Levy, Susan S; Thralls, Katie J; Kviatkovsky, Shiloah A

Falls are the leading cause of disability, injury, hospital admission, and injury-related death among older adults. Balance limitations have consistently been identified as predictors of falls and increased fall risk. Field measures of balance are limited by issues of subjectivity, ceiling effects, and low sensitivity to change. The gold standard for measuring balance is the force plate; however, its field use is untenable due to high cost and lack of portability. Thus, a critical need is observed for valid objective field measures of balance to accurately assess balance and identify limitations over time. The purpose of this study was to examine the concurrent validity and 3-day test-retest reliability of Balance Tracking System (BTrackS) in community-dwelling older adults. Minimal detectable change values were also calculated to reflect changes in balance beyond measurement error. Postural sway data were collected from community-dwelling older adults (N = 49, mean [SD] age = 71.3 [7.3] years) with a force plate and BTrackS in multitrial eyes open (EO) and eyes closed (EC) static balance conditions. Force sensors transmitted BTrackS data via a USB to a computer running custom software. Three approaches to concurrent validity were taken including calculation of Pearson product moment correlation coefficients, repeated-measures ANOVAs, and Bland-Altman plots. Three-day test-retest reliability of BTrackS was examined in a second sample of 47 community-dwelling older adults (mean [SD] age = 75.8 [7.7] years) using intraclass correlation coefficients and MDC values at 95% CI (MDC95) were calculated. BTrackS demonstrated good validity using Pearson product moment correlations (r > 0.90). Repeated-measures ANOVA and Bland-Altman plots indicated some BTrackS bias with center of pressure (COP) values higher than FP COP values in the EO (mean [SD] bias = 4.0 [6.8]) and EC (mean [SD] bias = 9.6 [12.3]) conditions. Test-retest reliability using intraclass correlation coefficients (ICC2.1 was excellent (0.83) and calculated MDC95 for EO (9.6 cm) and EC (19.4 cm) and suggested that postural sway changes of these amounts are meaningful. BTrackS showed some bias with values exceeding force plate values in both EO and EC conditions. Excellent test-retest reliability and resulting MDC95 values indicated that BTrackS has the potential to identify meaningful changes in balance that may warrant intervention. BTrackS is an objective measure of balance that can be used to monitor balance in community-dwelling older adults over time. It can reliably identify changes that may require further attention (eg, fall-prevention strategies, declines in physical function) and shows promise for assessing intervention efficacy in this growing segment of the population.

Using Replicates in Information Retrieval Evaluation.

PubMed

Voorhees, Ellen M; Samarov, Daniel; Soboroff, Ian

2017-09-01

This article explores a method for more accurately estimating the main effect of the system in a typical test-collection-based evaluation of information retrieval systems, thus increasing the sensitivity of system comparisons. Randomly partitioning the test document collection allows for multiple tests of a given system and topic (replicates). Bootstrap ANOVA can use these replicates to extract system-topic interactions-something not possible without replicates-yielding a more precise value for the system effect and a narrower confidence interval around that value. Experiments using multiple TREC collections demonstrate that removing the topic-system interactions substantially reduces the confidence intervals around the system effect as well as increases the number of significant pairwise differences found. Further, the method is robust against small changes in the number of partitions used, against variability in the documents that constitute the partitions, and the measure of effectiveness used to quantify system effectiveness.

Attention lapses in children with spina bifida and hydrocephalus and children with attention-deficit/hyperactivity disorder.

PubMed

De la Torre, Gabriel G; Martin, Alba; Cervantes, Elizabeth; Guil, Rocio; Mestre, Jose M

2017-08-01

Attentional lapses are usually defined as temporary and often brief shifts of attention away from some primary task to unrelated internal information processing. This study addressed the incidence of attention lapses and differences in attentional functioning in 30 children with attention-deficit/hyperactivity disorder (ADHD), 26 healthy children, and 29 children with spina bifida myelomeningocele and hydrocephalus (SBH). Assessments were conducted using computerized tonic and phasic attention tests, the Symbol Digit Modalities Test (SDMT), and the Trail Making Test Form B (TMT-B). The group with SBH differed from normal controls on cognitive measures of attention and executive functions. The ADHD group obtained lower scores than the SBH group and healthy children. ANOVA results showed that there was an effect of shunt revisions and shunt-related infections on neuropsychological performance. Lapses of attention together with reaction time may thus represent important factors for the understanding of cognitive deficits in SBH.

On the efficacy of procedures to normalize Ex-Gaussian distributions.

PubMed

Marmolejo-Ramos, Fernando; Cousineau, Denis; Benites, Luis; Maehara, Rocío

2014-01-01

Reaction time (RT) is one of the most common types of measure used in experimental psychology. Its distribution is not normal (Gaussian) but resembles a convolution of normal and exponential distributions (Ex-Gaussian). One of the major assumptions in parametric tests (such as ANOVAs) is that variables are normally distributed. Hence, it is acknowledged by many that the normality assumption is not met. This paper presents different procedures to normalize data sampled from an Ex-Gaussian distribution in such a way that they are suitable for parametric tests based on the normality assumption. Using simulation studies, various outlier elimination and transformation procedures were tested against the level of normality they provide. The results suggest that the transformation methods are better than elimination methods in normalizing positively skewed data and the more skewed the distribution then the transformation methods are more effective in normalizing such data. Specifically, transformation with parameter lambda -1 leads to the best results.

Using Replicates in Information Retrieval Evaluation

PubMed Central

VOORHEES, ELLEN M.; SAMAROV, DANIEL; SOBOROFF, IAN

2018-01-01

This article explores a method for more accurately estimating the main effect of the system in a typical test-collection-based evaluation of information retrieval systems, thus increasing the sensitivity of system comparisons. Randomly partitioning the test document collection allows for multiple tests of a given system and topic (replicates). Bootstrap ANOVA can use these replicates to extract system-topic interactions—something not possible without replicates—yielding a more precise value for the system effect and a narrower confidence interval around that value. Experiments using multiple TREC collections demonstrate that removing the topic-system interactions substantially reduces the confidence intervals around the system effect as well as increases the number of significant pairwise differences found. Further, the method is robust against small changes in the number of partitions used, against variability in the documents that constitute the partitions, and the measure of effectiveness used to quantify system effectiveness. PMID:29905334

Effects of UGT1A9 genetic polymorphisms on monohydroxylated derivative of oxcarbazepine concentrations and oxcarbazepine monotherapeutic efficacy in Chinese patients with epilepsy.

PubMed

Lu, Yao; Fang, Youxin; Wu, Xunyi; Ma, Chunlai; Wang, Yue; Xu, Lan

2017-03-01

The human UDP-glucuronosyltransferase which is genetically polymorphic catalyzes glucuronidations of various drugs. The interactions among UGT1A4, UGT1A6, UGT1A9, and UGT2B15 genetic polymorphisms, monohydroxylated derivative (MHD) of oxcarbazepine (OXC) plasma concentrations, and OXC monotherapeutic efficacy were explored in 124 Chinese patients with epilepsy receiving OXC monotherapy. MHD is the major active metabolite of OXC, and its plasma concentration was measured using high-performance liquid chromatography when patients reached their maintenance dose of OXC. Genomic DNA was extracted from whole blood and SNP genotyping performed using PCR followed by dideoxy chain termination sequencing. We followed the patients for at least 1 year to evaluate the OXC monotherapy efficacy. Patients were divided into two groups according to their therapeutic outcome: group 1, seizure free; group 2, not seizure free. The data were analyzed using T test, one-way analysis of variance (ANOVA), Kruskal-Wallis test, chi-square test, Fisher's exact test, correlation analysis, and multivariate regression analysis. T test analysis showed that MHD plasma concentrations were significantly different between the two groups (p = 0.002). One-way ANOVA followed by Bonferroni post hoc testing of four candidate SNPs revealed that carriers of the UGT1A9 variant allele I399 C > T (TT 13.28 ± 7.44 mg/L, TC 16.41 ± 6.53 mg/L) had significantly lower MHD plasma concentrations and poorer seizure control than noncarriers (CC 22.24 ± 8.49 mg/L, p < 0.05). In our study, we have demonstrated the effects of UGT1A9 genetic polymorphisms on MHD plasma concentrations and OXC therapeutic efficacy. Through MHD monitoring, we can predict OXC therapeutic efficacy, which may be useful for the personalization of OXC therapy in epileptic patients.

Cannabis and Ecstasy/ MDMA: empirical measures of creativity in recreational users.

PubMed

Jones, Katy A; Blagrove, M; Parrott, A C

2009-12-01

This study investigated the associations between chronic cannabis and Ecstasy/MDMA use and one objective and two subjective measure of creativity. Fifteen abstinent Ecstasy users, 15 abstinent cannabis users, and 15 nondrug-user controls, completed three measures of creativity: the Consequences behavioral test of creativity, self-assessed performance on the Consequences test, and Gough's Trait Self-Report Creative Adjective Checklist. The Consequences test involved five scenarios where possible consequences had to be devised; scoring was conducted by the standard blind rating (by two independent judges) for "remoteness" and "rarity," and by a frequency and rarity of responses method. Cannabis users had significantly more "rare-creative" responses than controls (Tukey, p < 0.05); this effect remained significant with gender as a covariate. There were no significant differences between the groups on the number of standard scoring "remote-creative" ideas or for fluency of responses. On self-rated creativity, there was a significant ANOVA group difference (p < 0.05), with Ecstasy users tending to rate their answers as more creative than controls (Tukey comparison; p = 0.058, two-tailed). Ecstasy users did not differ from controls on the behavioral measures of creativity, although there was a borderline trend for self-assessment of greater creativity. Cannabis users produced significantly more "rare-creative" responses, but did not rate themselves as more creative.

Rasch analysis for psychometric improvement of science attitude rating scales

NASA Astrophysics Data System (ADS)

Oon, Pey-Tee; Fan, Xitao

2017-04-01

Students' attitude towards science (SAS) is often a subject of investigation in science education research. Survey of rating scale is commonly used in the study of SAS. The present study illustrates how Rasch analysis can be used to provide psychometric information of SAS rating scales. The analyses were conducted on a 20-item SAS scale used in an existing dataset of The Trends in International Mathematics and Science Study (TIMSS) (2011). Data of all the eight-grade participants from Hong Kong and Singapore (N = 9942) were retrieved for analyses. Additional insights from Rasch analysis that are not commonly available from conventional test and item analyses were discussed, such as invariance measurement of SAS, unidimensionality of SAS construct, optimum utilization of SAS rating categories, and item difficulty hierarchy in the SAS scale. Recommendations on how TIMSS items on the measurement of SAS can be better designed were discussed. The study also highlights the importance of using Rasch estimates for statistical parametric tests (e.g. ANOVA, t-test) that are common in science education research for group comparisons.

405 nm diode laser, halogen lamp and LED device comparison in dental composites cure: an "in vitro" experimental trial.

PubMed

Fornaini, C; Lagori, G; Merigo, E; Rocca, J-P; Chiusano, M; Cucinotta, A

2015-12-30

A 405 nm diode laser is indicated for composite materials polymerizing, thanks to the recent evolution in their compositions, absorbing in blue part of the spectrum. The purpose of this research was to evaluate its performance on two different kinds of composite resins. Two different composites were polymerized with a traditional halogen lamp, a LED device and a 405 nm diode laser. The depth of the cure, the volumetric shrinkage, and the degree of the conversion (DC%) of the double bond during the curing process were measured. One-way ANOVA test, Kruskal-Wallis tests, and Dunn comparison tests were used for statistic analysis. Regarding the depth of polymerization, the laser had the worst performance on one composite while on the other, no significant difference with the other devices was observed. The volumetric shrinkage showed that laser produced the lowest change in both of the composites. The DC% measure confirmed these findings. Based on the results of this preliminary study, it is not possible to recommend the 405 nm diode laser for the polymerization of dental composites.

Distributed practice. The more the merrier? A randomised bronchoscopy simulation study

PubMed Central

Bjerrum, Anne Sofie; Eika, Berit; Charles, Peder; Hilberg, Ole

2016-01-01

Introduction The distribution of practice affects the acquisition of skills. Distributed practice has shown to be more effective for skills acquisition than massed training. However, it remains unknown as to which is the most effective distributed practice schedule for learning bronchoscopy skills through simulation training. This study compares two distributed practice schedules: One-day distributed practice and weekly distributed practice. Method Twenty physicians in training were randomly assigned to one-day distributed or weekly distributed bronchoscopy simulation practice. Performance was assessed with a pre-test, a post-test after each practice session, and a 4-week retention test using previously validated simulator measures. Data were analysed with repeated measures ANOVA. Results No interaction was found between group and test (F(4,72) <1.68, p>0.16), except for the measure ‘percent-segments-entered’, and no main effect of group was found for any of the measures (F(1,72)< 0.87, p>0.36), which indicates that there was no difference between the learning curves of the one-day distributed practice schedule and the weekly distributed practice schedule. Discussion We found no difference in effectiveness of bronchoscopy skills acquisition between the one-day distributed practice and the weekly distributed practice. This finding suggests that the choice of bronchoscopy training practice may be guided by what best suits the clinical practice. PMID:27172423

Distributed practice. The more the merrier? A randomised bronchoscopy simulation study.

PubMed

Bjerrum, Anne Sofie; Eika, Berit; Charles, Peder; Hilberg, Ole

2016-01-01

Introduction The distribution of practice affects the acquisition of skills. Distributed practice has shown to be more effective for skills acquisition than massed training. However, it remains unknown as to which is the most effective distributed practice schedule for learning bronchoscopy skills through simulation training. This study compares two distributed practice schedules: One-day distributed practice and weekly distributed practice. Method Twenty physicians in training were randomly assigned to one-day distributed or weekly distributed bronchoscopy simulation practice. Performance was assessed with a pre-test, a post-test after each practice session, and a 4-week retention test using previously validated simulator measures. Data were analysed with repeated measures ANOVA. Results No interaction was found between group and test (F(4,72) <1.68, p>0.16), except for the measure 'percent-segments-entered', and no main effect of group was found for any of the measures (F(1,72)< 0.87, p>0.36), which indicates that there was no difference between the learning curves of the one-day distributed practice schedule and the weekly distributed practice schedule. Discussion We found no difference in effectiveness of bronchoscopy skills acquisition between the one-day distributed practice and the weekly distributed practice. This finding suggests that the choice of bronchoscopy training practice may be guided by what best suits the clinical practice.

Genetic variance of tolerance and the toxicant threshold model.

PubMed

Tanaka, Yoshinari; Mano, Hiroyuki; Tatsuta, Haruki

2012-04-01

A statistical genetics method is presented for estimating the genetic variance (heritability) of tolerance to pollutants on the basis of a standard acute toxicity test conducted on several isofemale lines of cladoceran species. To analyze the genetic variance of tolerance in the case when the response is measured as a few discrete states (quantal endpoints), the authors attempted to apply the threshold character model in quantitative genetics to the threshold model separately developed in ecotoxicology. The integrated threshold model (toxicant threshold model) assumes that the response of a particular individual occurs at a threshold toxicant concentration and that the individual tolerance characterized by the individual's threshold value is determined by genetic and environmental factors. As a case study, the heritability of tolerance to p-nonylphenol in the cladoceran species Daphnia galeata was estimated by using the maximum likelihood method and nested analysis of variance (ANOVA). Broad-sense heritability was estimated to be 0.199 ± 0.112 by the maximum likelihood method and 0.184 ± 0.089 by ANOVA; both results implied that the species examined had the potential to acquire tolerance to this substance by evolutionary change. Copyright © 2012 SETAC.

Effects of muscular and aqua aerobic combined exercise on metabolic indices in elderly women with metabolic syndrome

PubMed Central

Yoo, Yong-Kwon; Kim, Soo-Keun; Song, Min-Sun

2013-01-01

The purpose of this study was to investigate the effects of muscle strengthening exercise using elastic thera-band and aquatic aerobic combined exercise on metabolic syndrome index in elderly with metabolic syndrome. Fifty-four were assigned to muscle strengthening exercise group (n = 19), aquatic aerobic exercise group (n = 19), and combined exercise group (n = 16). The muscle strength exercise, aquatic aerobic exercise and combined exercise were provided three times a week for 12 weeks. Metabolic syndrome indices[Fasting blood glucose, triglyceride, high density lipoprotein cholesterol (HDL-C), systolic blood pressure, diastolic blood pressure and waist circumference] were measured before and after the program. One-way ANOVA, paired t-test and two-way repeated ANOVA were used with the SPSS program for data analysis. There was a significant difference in triglyceride (p < .001), HDL-C (p = .010) and waist circumference (p = .016). Triglyceride and waist circumference was significantly decreased in combined group than muscle strength exercise group and aquatic exercise group. HDL-C was significantly increased in combined group than muscle strength exercise group. The results indicate that combined exercise was more effective in the improvement of dyslipidemia and abdominal obesity. PMID:25566424

Beverage consumption in low income, "milk-friendly" families.

PubMed

Glanville, N Theresa; McIntyre, Lynn

2009-01-01

Beverage consumption by poor, lone mother-led, "milk-friendly" families living in Atlantic Canada was characterized over a one-month income cycle. Beverage intake and food security status were assessed weekly, using a 24-hour dietary recall and the Cornell-Radimer food insecurity questionnaire. Families were classified as "milk friendly" if total consumption of milk was 720 mL on a single day during the month. Beverage intake was assessed using t-tests, analysis of variance (ANOVA), repeated measures ANOVA with post hoc comparisons, and chi-square analysis. Milk consumption by milk-friendly families (76; total sample, 129) was highest at the time of the month when they had the most money to spend. During all time intervals, mothers consumed the least amount of milk and children aged one to three years consumed the most. Mothers consumed carbonated beverages disproportionately, while children of all ages consumed more fruit juice/drink. Mothers' coffee consumption was profoundly increased when either they or their children were hungry. The quality of beverage intake by members of low-income households fluctuates in accordance with financial resources available to purchase foods. Mothers' beverage intake is compromised by the degree of food insecurity the family experiences.

Effects of muscular and aqua aerobic combined exercise on metabolic indices in elderly women with metabolic syndrome.

PubMed

Yoo, Yong-Kwon; Kim, Soo-Keun; Song, Min-Sun

2013-12-01

The purpose of this study was to investigate the effects of muscle strengthening exercise using elastic thera-band and aquatic aerobic combined exercise on metabolic syndrome index in elderly with metabolic syndrome. Fifty-four were assigned to muscle strengthening exercise group (n = 19), aquatic aerobic exercise group (n = 19), and combined exercise group (n = 16). The muscle strength exercise, aquatic aerobic exercise and combined exercise were provided three times a week for 12 weeks. Metabolic syndrome indices[Fasting blood glucose, triglyceride, high density lipoprotein cholesterol (HDL-C), systolic blood pressure, diastolic blood pressure and waist circumference] were measured before and after the program. One-way ANOVA, paired t-test and two-way repeated ANOVA were used with the SPSS program for data analysis. There was a significant difference in triglyceride (p < .001), HDL-C (p = .010) and waist circumference (p = .016). Triglyceride and waist circumference was significantly decreased in combined group than muscle strength exercise group and aquatic exercise group. HDL-C was significantly increased in combined group than muscle strength exercise group. The results indicate that combined exercise was more effective in the improvement of dyslipidemia and abdominal obesity.

Masticatory and cervical muscle tenderness and pain sensitivity in a remote area in subjects with a temporomandibular disorder and neck disability.

PubMed

Silveira, Anelise; Armijo-Olivo, Susan; Gadotti, Inae C; Magee, David

2014-01-01

To compare the masticatory and cervical muscle tenderness and pain sensitivity in the hand (remote region) between patients with temporomandibular disorders (TMD) and healthy controls. Twenty female subjects were diagnosed with chronic TMD, and 20 were considered healthy. Subjects completed the Neck Disability Index and Limitations of Daily Functions in a TMD questionnaire. Tenderness of the masticatory and cervical muscles and pain sensitivity in the hand were measured using an algometer. Three-way mixed analysis of variance (ANOVA) evaluated differences in muscle tenderness between groups. One-way ANOVA compared pain sensitivity in the hand between groups. Effect sizes were assessed using Cohen guidelines. Significantly increased masticatory and cervical muscle tenderness and pain sensitivity in the hand were found in subjects with TMD when compared with healthy subjects. Moderate to high effect sizes showed the clinical relevance of the findings. The results of this study have highlighted the importance of assessing TMD patients not only in the craniofacial region but also in the neck and other parts of the body. Future studies should focus on testing the effectiveness of treatments addressing the neck and the pain sensitivity in the hand in patients with TMD.

The Impact of Advanced Placement Courses on High School Students Taking the Scholastic Aptitude Test.

ERIC Educational Resources Information Center

Thomas, L. M.; Thomas, Suzanne G.

This obtrusive post-hoc quasi-experimental study investigated Scholastic Assessment Test (SAT) scores of 111 high school students in grades 10 through 12. Fifty-three students were enrolled in at least one Advanced Placement (AP) course at the time of the study. General factorial analysis of variance (ANOVA) tested for significant differences…

SDT: The Brazilian Standardization of the Silver Drawing Test of Cognition and Emotion.

ERIC Educational Resources Information Center

Allessandrini, Cristina Dias; Duarte, Jose Luclano Miranda; Bianco, Marisa Fernandes; Dupas, Margarida Azevedo

1998-01-01

The Silver Drawing Test of Cognition and Emotion was standardized for Brazilian children (N=2,000). ANOVA results are presented for age and education groups from early grades on, including distinguishing adult education levels; results are compared for U.S. and Brazilian populations. Growth in test scores, emotional content responses, and…

Testing a measure of organizational learning capacity and readiness for transformational change in human services.

PubMed

Bess, Kimberly D; Perkins, Douglas D; McCown, Diana L

2011-01-01

Transformative organizational change requires organizational learning capacity, which we define in terms of (1) internal and (2) external organizational systems alignment, and promoting a culture of learning, including (3) an emphasis on exploration and information, (4) open communication, (5) staff empowerment, and (6) support for professional development. We shortened and adapted Watkins and Marsick's Dimensions of Learning Organizations Questionnaire into a new 16-item Organizational Learning Capacity Scale (OLCS) geared more toward nonprofit organizations. The OLCS and its subscales measuring each of the above 6 dimensions are unusually reliable for their brevity. ANOVAs for the OLCS and subscales clearly and consistently confirmed extensive participant observations and other qualitative data from four nonprofit human service organizations and one local human service funding organization.

Contribution of attachment insecurity to health-related quality of life in depressed patients.

PubMed

Ponizovsky, Alexander M; Drannikov, Angela

2013-06-22

To examine the individual contributions of insecure attachment styles and depression symptom severity to health-related quality of life (HRQoL) in patients diagnosed with adjustment disorder (AJD) with depressed mood. Participants were 67 patients diagnosed with International Classification of Diseases, Tenth edition AJD with depressed mood, who completed standardised self-report questionnaires measuring study variables. Mean scores and SDs were computed for the outcome and predictor measures. Pearson correlations among the measures were computed. The study hypotheses were tested using analysis of variance (ANOVA) and multiple regression analyses. All analyses were performed using the SPSS-17 software package (SPSS Inc., Chicago, IL, United States). ANOVA showed a significant main effect of the insecure attachment styles on depression symptom severity and life satisfaction scores. The results suggest that depressive symptoms were more severe (F = 4.13, df = 2.67, P < 0.05) and life satisfaction was poorer (F = 5.69, df = 2.67, P < 0.01) in both anxious-ambivalently and avoidantly attached patients compared with their securely attached counterparts, whereas the two insecure groups did not significantly differ by these variables. The anxious/ambivalent attachment style and depression symptom severity significantly contributed to HRQoL, accounting for 21.4% and 29.7% of the total variance, respectively [R(2) = 0.79; Adjusted R(2) = 0.77; F (5, 67) = 33.68, P < 0.0001], even after controlling for gender, marital and employment status confounders. The results show that the anxious/ambivalent attachment style together with depression symptom severity substantially and independently predict the HRQoL outcome in AJD with depressed mood.

On school violence in Korean middle school, prevention and reaction measures.

PubMed

Kwon, Se-Jeong; Kim, Tae-Young

2015-02-01

This study is aiming to explore the practical and realistic measure in more variable way, which enables us to manage the problems about school violence we are currently facing as well as to overcome limitations in the current situation where we react only with punishments, mainly in the form of the law enforcement, supported by the police. This study was conducted on male and female students (n= 424) and teachers (n= 136) attending at the seven middle schools located in Seoul. The frequency analysis, one way ANOVA F-test, t -test, the multiple regression analysis were applied. Students recognize' harmful environmental cleanup' as an important variable or factor to reduce school violence. Also, both teachers and students are aware that 'regular survey on school violence' could reduce school violence. In conclusion, it is considered that as an effective and viable prevention measure against school violence, more attention and affection efforts need to be activated and addressed, on the part of home, school, and government, which will enable our young generations of students to be brought up, and take up the future of our country.

Comparison of shear bond strength relative to two testing devices.

PubMed

Pecora, Nikole; Yaman, Peter; Dennison, Joseph; Herrero, Alberto

2002-11-01

Dentin adhesives are characterized on the basis of their bond strength to dentin; however, great variation exists within the same material depending on the testing apparatus. To realistically compare bond strengths, the testing mechanisms must be the same. The purpose of this investigation was to use 2 testing devices to evaluate the shear bond strength of 3 single-bottle adhesives with their multistep counterparts. The occlusal surfaces of 120 freshly extracted third molars were ground to expose the dentin and polished with 600-grit silicon carbide paper. Three single-bottle, (Optibond Solo Plus, 3M Single Bond, and Excite) and 3 multistep adhesives (Optibond FL, 3M MultiPurpose Plus, and Syntac) were each used to bond a composite cylinder (made from a 2.379 +/-.001-mm diameter by 4-mm-high mold) of Tetric Ceram to 20 teeth. The specimens were stored in 100% humidity for 24 hours. The shear bond strength at failure was measured in kilograms and converted to megapascals for each material, using a knife (conventional method) and an Ultradent testing device on a universal testing machine (Instron) at a loading rate of 0.5 mm/min. A 2-way analysis of variance (ANOVA) test was performed comparing the 2 testing devices and the materials at P<.05. Where significant, a 1-way ANOVA test was conducted among the materials for each test group, and a Tukey multiple comparison test was used to determine significant differences among the materials tested (P<.05). An independent Student t test at P<.05 was used to determine significance between testing devices. The results showed that Optibond Solo Plus (26.85 +/- 8.76 MPa), Optibond FL (25.40 +/- 4.44 MPa), 3M Single Bond (28.12 +/- 5.01 MPa), and 3M MultiPurpose Plus (34.40 +/- 7.90 MPa) had significantly higher bond strengths when tested with the Ultradent testing device. The mean values for Excite (19.47 +/- 6.17 MPa) and Syntac (20.20 +/- 7.07 MPa) were also higher with the Ultradent testing device, but the difference was not significant. Within the limitations of this study, all bonding agents tested resulted in higher mean shear bond strengths when tested with the Ultradent testing device compared with the unrestricted knife. The single-step bonding agents exhibited mean bond strengths comparable to their multistep counterparts.

Evaluation of a social cognitive theory-based yoga intervention to reduce anxiety.

PubMed

Mehta, Purvi; Sharma, Manoj

Yoga is often viewed as a form of alternative and complementary medicine, as it strives to achieve equilibrium between the body and mind that aids healing. Studies have shown the beneficial role of yoga in anxiety reduction. The purpose of this study was to design and evaluate a 10-week social cognitive theory based yoga intervention to reduce anxiety. The yoga intervention utilized the constructs of behavioral capability, expectations, self-efficacy for yoga from social cognitive theory, and included asanas (postures), pranayama (breathing techniques), shava asana (relaxation), and dhyana (meditation). A one-between and one-within group, quasi-experimental design was utilized for evaluation. Scales measuring expectations from yoga, self-efficacy for yoga, and Speilberger's State Trait Anxiety Inventory, were administered before and after the intervention. Repeated measures analyses of variance (ANOVA) were performed to compare pre-test and post-test scores in the two groups. Yoga as an approach shows promising results for anxiety reduction.

Isometric quadriceps strength determines sailing performance and neuromuscular fatigue during an upwind sailing emulation.

PubMed

Bourgois, Jan G; Callewaert, Margot; Celie, Bert; De Clercq, Dirk; Boone, Jan

2016-01-01

This study investigates the physiological responses to upwind sailing on a laser emulation ergometer and analyses the components of the physical profile that determine the physiological responses related to sailing level. Ten male high-level laser sailors performed an upwind sailing test, incremental cycling test and quadriceps strength test. During the upwind sailing test, heart rate (HR), oxygen uptake, ventilation, respiratory exchange ratio, rating of perceived exertion (RPE) and lactate concentration were measured, combined with near-infrared spectroscopy (NIRS) and electromyography (EMG) registration of the M. Vastus lateralis. Repeated measures ANOVA showed for the cardio-respiratory, metabolic and muscles responses (mean power frequency [MPF], root mean square [RMS], deoxy[Hb+Mb]) during the upwind sailing test an initial significant increase followed by a stabilisation, despite a constant increase in RPE. Stepwise regression analysis showed that better sailing level was for 46.5% predicted by lower MPF decrease. Lower MPF decrease was for 57.8% predicted by a higher maximal isometric quadriceps strength. In conclusion, this study indicates that higher sailing level was mainly determined by a lower rate of neuromuscular fatigue during the upwind sailing test (as indicated by MPF decrease). Additionally, the level of neuromuscular fatigue was mainly determined by higher maximal isometric quadriceps strength stressing the importance of resistance training in the planning of training.

Career satisfaction among dental practitioners in Srikakulam, India.

PubMed

Kaipa, Sudhakar; Pydi, Siva Kumar; Krishna Kumar, Rathikota Veeravenkata Sathyasai; Srinivasulu, Gomasani; Darsi, Venkata Rajesh Kumar; Sode, Munikumar

2015-01-01

This cross-sectional study was designed to measure the level and distribution of job satisfaction of registered dental practitioners and to explore the factors associated with it. The study was conducted among 66 registered dentists in Srikakulam, India. Job satisfaction was measured by using a modified version of the Dentists Satisfaction Survey questionnaire. The statistical tests employed were "t" test and analysis of variance (ANOVA). Post hoc test (Scheffe test) was employed for multiple comparisons. The response rate was 82.5%. The mean score of overall job satisfaction among dentists was 3.08 out of 5. The most satisfying aspect was income (3.7) and the least satisfying aspect was staff (2.5). Overall satisfaction increased with age. Male practitioners showed less satisfaction with staff, income, and overall satisfaction and more satisfaction in professional relations and time, when compared to females. Job satisfaction was found to be more in practitioners with postgraduate qualification. This study suggests that patient relations, perception of income, personal time, and staff are the important factors for job satisfaction among dentists. The findings of this study will be helpful to policymakers to design plans in order to increase the level of job satisfaction.

Career satisfaction among dental practitioners in Srikakulam, India

PubMed Central

Kaipa, Sudhakar; Pydi, Siva Kumar; Krishna Kumar, Rathikota Veeravenkata Sathyasai; Srinivasulu, Gomasani; Darsi, Venkata Rajesh Kumar; Sode, Munikumar

2015-01-01

Background: This cross-sectional study was designed to measure the level and distribution of job satisfaction of registered dental practitioners and to explore the factors associated with it. Materials and Methods: The study was conducted among 66 registered dentists in Srikakulam, India. Job satisfaction was measured by using a modified version of the Dentists Satisfaction Survey questionnaire. The statistical tests employed were “t” test and analysis of variance (ANOVA). Post hoc test (Scheffe test) was employed for multiple comparisons. Results: The response rate was 82.5%. The mean score of overall job satisfaction among dentists was 3.08 out of 5. The most satisfying aspect was income (3.7) and the least satisfying aspect was staff (2.5). Overall satisfaction increased with age. Male practitioners showed less satisfaction with staff, income, and overall satisfaction and more satisfaction in professional relations and time, when compared to females. Job satisfaction was found to be more in practitioners with postgraduate qualification. Conclusion: This study suggests that patient relations, perception of income, personal time, and staff are the important factors for job satisfaction among dentists. The findings of this study will be helpful to policymakers to design plans in order to increase the level of job satisfaction. PMID:25767766

[The effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis].

PubMed

Lee, Young-Mee; Sohng, Kyeong-Yae

2005-12-01

The purpose of this study was to determine the effects of foot reflexology on fatigue and insomnia in patients suffering from coal workers' pneumoconiosis. This study was a quasi-experimental study of pre-test and post-test design in a non-equivalent control group. The subjects of this study consisted of both the experimental group of twenty-nine and the control group of thirty coal workers' pneumoconiosis patients. Data was collected from December 10, 2002 to February 15, 2003. Foot reflexology was performed for 60 minutes twice a week through five weeks in the experimental group, but none in the control group. To evaluate the effects of foot reflexology, the scores of fatigue and insomnia were measured before and after the experiment in both groups. Fatigue was evaluated by Fatigue Symptoms Inventory. Insomnia was measured with the visual analogue scale (VAS). Data of this experiment was analyzed by Chi-square test, t-test, unpaired t-test and Repeated Measures ANOVA with the SAS Program. The scores of fatigue and insomnia decreased in the experimental group but not in the control group. There was a significant difference of fatigue and insomnia between the two groups. It is suggested that foot reflexology might have beneficial effects on reducing fatigue and insomnia in patients suffering from coal workers' pneumoconiosis, and can be recommended as a nursing intervention program for patients with coal workers' pneumoconiosis.

A quantitative study of the summer slide in science of elementary school students

NASA Astrophysics Data System (ADS)

Donovan, Giovanna Guadagno

Concerned parents and educators agree children learn best when the rhythm of instruction is continuous with practice and application of skills. Long summer breaks may interrupt the flow of formal school learning leading some students to forget previous instruction. A review of the previous school work is generally required in the fall upon return from the summer vacation. Investigating summer vacation and equity issues, Jamar (1994) noted that more affluent students may "return to school in the fall with a considerable educational advantage over their less advantaged peers as a result of either additional school-related learning, or lower levels of forgetting, over the summer months (p. 1)". The population of 402 fifth grade students from a suburban New England school district participated in this study. The district administered the science subtest of the TerraNova 2 (TN2) assessment in late May 2007 (pre-test data) and in September 2007 (post-test data). These archived data, including gender and student socioeconomic status (SES) levels (as referenced by free or reduced lunch status), were analyzed for an ex-post facto causal comparison study to identify the phenomenon of summer slide in science of fifth graders enrolled in six elementary schools. The ANOVA statistical model was used calculating the repeated measures factor of time (pre/post summer vacation) on the science content area. Subsequent two-way ANOVAS, with one repeated-measures factor (time of testing) explored the existence of similar/different patterns by gender and by SES levels. Two questions guided this study. First, does the summer slide phenomenon exist in science education? Second, if the summer slide in science phenomenon exists in science education, then does SES impact it? Does the summer slide in science phenomenon differ between genders? Findings suggest that the summer slide phenomenon exists in science; SES and gender does not affect the overall science test scores. However, SES impacts the summer slide phenomenon in science but gender does not impact summer slide in science. Furthermore, the school does not statistically impact the summer slide phenomenon in science and the impact of school does not differ across SES and genders.

An investigative comparison of purging and non-purging groundwater sampling methods in Karoo aquifer monitoring wells

NASA Astrophysics Data System (ADS)

Gomo, M.; Vermeulen, D.

2015-03-01

An investigation was conducted to statistically compare the influence of non-purging and purging groundwater sampling methods on analysed inorganic chemistry parameters and calculated saturation indices. Groundwater samples were collected from 15 monitoring wells drilled in Karoo aquifers before and after purging for the comparative study. For the non-purging method, samples were collected from groundwater flow zones located in the wells using electrical conductivity (EC) profiling. The two data sets of non-purged and purged groundwater samples were analysed for inorganic chemistry parameters at the Institute of Groundwater Studies (IGS) laboratory of the Free University in South Africa. Saturation indices for mineral phases that were found in the data base of PHREEQC hydrogeochemical model were calculated for each data set. Four one-way ANOVA tests were conducted using Microsoft excel 2007 to investigate if there is any statistically significant difference between: (1) all inorganic chemistry parameters measured in the non-purged and purged groundwater samples per each specific well, (2) all mineral saturation indices calculated for the non-purged and purged groundwater samples per each specific well, (3) individual inorganic chemistry parameters measured in the non-purged and purged groundwater samples across all wells and (4) Individual mineral saturation indices calculated for non-purged and purged groundwater samples across all wells. For all the ANOVA tests conducted, the calculated alpha values (p) are greater than 0.05 (significance level) and test statistic (F) is less than the critical value (Fcrit) (F < Fcrit). The results imply that there was no statistically significant difference between the two data sets. With a 95% confidence, it was therefore concluded that the variance between groups was rather due to random chance and not to the influence of the sampling methods (tested factor). It is therefore be possible that in some hydrogeologic conditions, non-purged groundwater samples might be just as representative as the purged ones. The findings of this study can provide an important platform for future evidence oriented research investigations to establish the necessity of purging prior to groundwater sampling in different aquifer systems.

Uncertainty of Videogrammetric Techniques used for Aerodynamic Testing

NASA Technical Reports Server (NTRS)

Burner, A. W.; Liu, Tianshu; DeLoach, Richard

2002-01-01

The uncertainty of videogrammetric techniques used for the measurement of static aeroelastic wind tunnel model deformation and wind tunnel model pitch angle is discussed. Sensitivity analyses and geometrical considerations of uncertainty are augmented by analyses of experimental data in which videogrammetric angle measurements were taken simultaneously with precision servo accelerometers corrected for dynamics. An analysis of variance (ANOVA) to examine error dependence on angle of attack, sensor used (inertial or optical). and on tunnel state variables such as Mach number is presented. Experimental comparisons with a high-accuracy indexing table are presented. Small roll angles are found to introduce a zero-shift in the measured angles. It is shown experimentally that. provided the proper constraints necessary for a solution are met, a single- camera solution can he comparable to a 2-camera intersection result. The relative immunity of optical techniques to dynamics is illustrated.

Cuspal Deflection of Premolars Restored with Bulk-Fill Composite Resins.

PubMed

Behery, Haytham; El-Mowafy, Omar; El-Badrawy, Wafa; Saleh, Belal; Nabih, Sameh

2016-01-01

This in vitro study compared cuspal deflection of premolars restored with three bulk-fill composite resins to that of incrementally-restored ones with a low-shrinkage silorane-based restorative material. Forty freshly-extracted intact human upper premolars were used. Reference points at buccal and palatal cusp tips were acid-etched and composite rods were horizontally bonded to them (TPH-Spectra-HV, Dentsply). Two acrylic resin guiding paths were made for each premolar to guide beaks of a digital micrometer used for cuspal deflection measurements. Standardized MOD cavities, 3 mm wide bucco-lingually and 3.5 mm deep, were prepared on each premolar. Prepared teeth were then equally divided into four groups (n = 10) and each group was assigned to one of four composite resin (QuiXX, Dentsply; X-tra fil, Voco; Tetric EvoCeram Bulk Fill, Ivoclar Vivadent; low-shrinkage Filtek LS, 3M/ESPE). Adper Single Bond-Plus, 3M/ESPE was used with all bulk-fill restoratives. LS-System Adhesive, 3M/ESPE was used with Filtek LS. For each prepared premolar, cuspal deflection was measured in microns as the difference between two readings between reference points before and after restoration completion. Means and SDs were calculated and data statistically-analyzed using One-way ANOVA and Tukey's test. Filtek LS showed the lowest mean cuspal deflection value 6.4(0.84)μm followed by Tetric EvoCeram Bulk Fill 10.1(1.2) μm and X-tra fil 12.4(1.35)μm, while QuiXX showed the highest mean 13(1.05)μm. ANOVA indicated significant difference among mean values of groups (p < 0.001). Tukey's test indicated no significant difference in mean values between QuiXX and X-tra fil (p = 0.637). Tetric EvoCeram Bulk Fill had significantly lower mean cuspal deflection compared with the two other bulk-fill composite resins tested. Filtek LS had the lowest significant mean cuspal deflection in comparison to all tested bulk-fill restoratives. The use of Tetric EvoCeram Bulk fill composite resin restorative for class II MOD cavities resulted in reduced cuspal deflection in comparison to the two other bulk-fill composite resins tested. The silorane-based Filtek LS restorative resulted in the least cuspal deflection in comparison to all tested bulk-fill composite restoratives. © 2016 Wiley Periodicals, Inc.

ANOVA with Rasch Measures.

ERIC Educational Resources Information Center

Linacre, John Michael

Various methods of estimating main effects from ordinal data are presented and contrasted. Problems discussed include: (1) at what level to accumulate ordinal data into linear measures; (2) how to maintain scaling across analyses; and (3) the inevitable confounding of within cell variance with measurement error. An example shows three methods of…

Cryobiology of coral fragments.

PubMed

Hagedorn, Mary; Farrell, Ann; Carter, Virginia L

2013-02-01

Around the world, coral reefs are dying due to human influences, and saving habitat alone may not stop this destruction. This investigation focused on the biological processes that will provide the first steps in understanding the cryobiology of whole coral fragments. Coral fragments are a partnership of coral tissue and endosymbiotic algae, Symbiodinium sp., commonly called zooxanthellae. These data reflected their separate sensitivities to chilling and a cryoprotectant (dimethyl sulfoxide) for the coral Pocillopora damicornis, as measured by tissue loss and Pulse Amplitude Modulated fluorometry 3weeks post-treatment. Five cryoprotectant treatments maintained the viability of the coral tissue and zooxanthellae at control values (1M dimethyl sulfoxide at 1.0, 1.5 and 2.0h exposures, and 1.5M dimethyl sulfoxide at 1.0 and 1.5h exposures, P>0.05, ANOVA), whereas 2M concentrations did not (P<0.05, ANOVA). A seasonal response to chilling was observed in the coral tissue, but not in the zooxanthellae. During the winter when the fragments were chilled, the coral tissue remained relatively intact (∼25% loss) post-treatment, but the zooxanthellae numbers in the tissue declined after 5min of chilling (P<0.05, ANOVA). However, in the late spring, coral tissue (∼75% loss) and zooxanthellae numbers declined in response to chilling alone (P<0.05, ANOVA). When a cryoprotectant (1M dimethyl sulfoxide) was used in concert with chilling it protected the coral against tissue loss after 45min of cryoprotectant exposure (P>0.05, ANOVA), but it did not protect against the loss of zooxanthellae (P<0.05, ANOVA). The zooxanthellae are the most sensitive element in the coral fragment complex and future cryopreservation protocols must be guided by their greater sensitivity. Copyright © 2012 Elsevier Inc. All rights reserved.

The effect of Cardiac Arrhythmias Simulation Software on the nurses' learning and professional development.

PubMed

Bazrafkan, Leila; Hemmati, Mehdi

2018-04-01

One of the important tasks of nurses in intensive care unit is interpretation of ECG. The use of training simulator is a new paradigm in the age of computers. This study was performed to evaluate the impact of cardiac arrhythmias simulator software on nurses' learning in the subspecialty Vali-Asr Hospital in 2016. This study was conducted by quasi-experimental randomized Salomon four group design with the participation of 120 nurses in subspecialty Vali-Asr Hospital in Tehran, Iran in 2016 that were selected purposefully and allocated in 4 groups. By this design other confounding factors such as the prior information, maturation and the role of sex and age were controlled by Solomon 4 design. The valid and reliable multiple choice test tools were used to gather information; the validity of the test was approved by experts and its reliability was obtained by Cronbach's alpha coefficient 0.89. At first, the knowledge and skills of the participants were assessed by a pre-test; following the educational intervention with cardiac arrhythmias simulator software during 14 days in ICUs, the mentioned factors were measured for the two groups again by a post-test in the four groups. Data were analyzed using the two way ANOVA. The significance level was considered as p<0.05. Based on randomized four-group Solomon designs and our test results, using cardiac arrhythmias simulator software as an intervention was effective in the nurses' learning since a significant difference was found between pre-test and post-test in the first group (p<0.05). Also, other comparisons by ANOVA test showed that there was no interaction between pre-test and intervention in all of the three knowledge areas of cardiac arrhythmias, their treatments and their diagnosis (P>0.05). The use of software-based simulator for cardiac arrhythmias was effective in nurses' learning in light of its attractive components and interactive method. This intervention increased the knowledge of the nurses in cognitive domain of cardiac arrhythmias in addition to their diagnosis and treatment. Also, the package can be used for training in other areas such as continuing medical education.

Ground Reaction Forces of the Lead and Trail Limbs when Stepping Over an Obstacle

PubMed Central

Bovonsunthonchai, Sunee; Khobkhun, Fuengfa; Vachalathiti, Roongtiwa

2015-01-01

Background Precise force generation and absorption during stepping over different obstacles need to be quantified for task accomplishment. This study aimed to quantify how the lead limb (LL) and trail limb (TL) generate and absorb forces while stepping over obstacle of various heights. Material/Methods Thirteen healthy young women participated in the study. Force data were collected from 2 force plates when participants stepped over obstacles. Two limbs (right LL and left TL) and 4 conditions of stepping (no obstacle, stepping over 5 cm, 20 cm, and 30 cm obstacle heights) were tested for main effect and interaction effect by 2-way ANOVA. Paired t-test and 1-way repeated-measure ANOVA were used to compare differences of variables between limbs and among stepping conditions, respectively. The main effects on the limb were found in first peak vertical force, minimum vertical force, propulsive peak force, and propulsive impulse. Results Significant main effects of condition were found in time to minimum force, time to the second peak force, time to propulsive peak force, first peak vertical force, braking peak force, propulsive peak force, vertical impulse, braking impulse, and propulsive impulse. Interaction effects of limb and condition were found in first peak vertical force, propulsive peak force, braking impulse, and propulsive impulse. Conclusions Adaptations of force generation in the LL and TL were found to involve adaptability to altered external environment during stepping in healthy young adults. PMID:26169293

Group Balance Training Specifically Designed for Individuals With Alzheimer Disease: Impact on Berg Balance Scale, Timed Up and Go, Gait Speed, and Mini-Mental Status Examination.

PubMed

Ries, Julie D; Hutson, Janet; Maralit, Leslie A; Brown, Megan B

2015-01-01

Individuals with Alzheimer disease (IwAD) experience more frequent and more injurious falls than their cognitively intact peers. Evidence of balance and gait dysfunction is observed earlier in the course of Alzheimer disease (AD) than once believed. Balance training has been demonstrated to be effective in improving balance and decreasing falls in cognitively intact older adults but is not well studied in IwAD. This study was designed to analyze the effects of a group balance training program on balance and falls in IwAD. The program was developed specifically for IwAD, with explicit guidelines for communication/interaction and deliberate structure of training sessions catered to the motor learning needs of IwAD. This prospective, quasi-experimental, pretest-posttest design study describes the effects of a balance training program for a cohort of IwAD. Thirty IwAD were recruited from 3 adult day health centers; 22 completed at least 1 posttest session. Participants were tested with Berg Balance Scale (BBS), Timed Up and Go (TUG), Self-Selected Gait Speed (SSGS), Fast Gait Speed (FGS), and Mini-Mental Status Examination (MMSE) immediately before and after the 3-month intervention and again 3 months later. Group training was held at the adult day health centers for 45 minutes, twice per week. Sessions were characterized by massed, constant, and blocked practice of functional, relevant activities with considerable repetition. Ratio of participant to staff member never exceeded 3:1. Physical therapist staff members assured that participants were up on their feet the majority of each session and were individually challenged as much as possible. Repeated-measures analysis of variance (ANOVA) for BBS was significant (F = 15.04; df = 1.67/28.40; P = .000) with post hoc tests, revealing improvement between pretest and immediate posttest (P = .000) and decline in performance between immediate and 3-month posttest (P = .012). Repeated-measures ANOVA posttest for MMSE was significant (F = 5.12; df = 1.73/22.53; P = .018) with post hoc tests, showing no change in MMSE between pretest and immediate posttest but decline in MMSE when comparing immediate posttest with 3-month posttest (P = .038) and pretest with 3-month posttest (P = .019). Repeated-measures ANOVA for TUG, FGS, and SSGS were not significant. Immediate effects of the intervention as assessed by the a priori paired t tests (comparing pre- and immediate posttest data) revealed significant improvement in BBS (t = -7.010; df = 20; P = .000), TUG (t = 3.103; df = 20; P = .006), and FGS (t = -2.115; df = 19; P = .048), but not in SSGS (t = -1.456; df = 20; P = .161). The 3-month group balance training intervention designed specifically for IwAD was effective in improving balance and mobility, as evidenced by improved BBS and TUG performances. Cognition did not decline during the course of the intervention but did decline following the intervention, suggesting a possible protective effect. Given the promising findings, a larger-scale controlled study is warranted.

Copper, Aluminum and Nickel: A New Monocrystalline Orthodontic Alloy

NASA Astrophysics Data System (ADS)

Wierenga, Mark

Introduction: This study was designed to evaluate, via tensile and bend testing, the mechanical properties of a newly-developed monocrystalline orthodontic archwire comprised of a blend of copper, aluminum, and nickel (CuAlNi). Methods: The sample was comprised of three shape memory alloys; CuAlNi, copper nickel titanium (CuNiTi), and nickel titanium (NiTi); from various orthodontic manufacturers in both 0.018" round and 0.019" x 0.025" rectangular dimensions. Additional data was gathered for similarly sized stainless steel and beta-titanium archwires as a point of reference for drawing conclusions about the relative properties of the archwires. Measurements of loading and unloading forces were recorded in both tension and deflection testing. Repeated-measure ANOVA (alpha= 0.05) was used to compare loading and unloading forces across wires and one-way ANOVA (alpha= 0.05) was used to compare elastic moduli and hysteresis. To identify significant differences, Tukey post-hoc comparisons were performed. Results: The modulus of elasticity, deflection forces, and hysteresis profiles of CuAlNi were significantly different than the other superelastic wires tested. In all tests, CuAlNi had a statistically significant lower modulus of elasticity compared to the CuNiTi and NiTi wires (P <0.0001). The CuAlNi wire exhibited significantly lower loading and unloading forces than any other wire tested. In round wire tensile tests, loading force at all deflections was significantly lower for CuAlNi than CuNiTi or NiTi (P <0.0001). In tensile testing, the CuAlNi alloy was able to recover from a 7 mm extension (10% elongation) without permanent deformation and with little to no loss in force output. In large-deflection bend tests at 4, 5, and 6 mm deflection, CuAlNi showed the significantly lowest loading forces across the three wire materials (P <0.0001). The NiTi wires showed up to 12 times the amount of energy loss due to hysteresis compared to CuAlNi. CuAlNi showed a hysteresis loss that was significantly less than any other wire tested in this study (P <0.0001). Conclusions: The relatively constant force delivered for a long period of time during the deactivation of this wire, the minimal hysteresis loss, the low force output in deflection, and the relatively low modulus of elasticity suggest that CuAlNi wires should be considered an important material addition to orthodontic metallurgy.

Measurement uncertainty of the EU methods for microbiological examination of red meat.

PubMed

Corry, Janet E L; Hedges, Alan J; Jarvis, Basil

2007-09-01

Three parallel trials were made of EU methods proposed for the microbiological examination of red meat using two analysts in each of seven laboratories within the UK. The methods involved determination of aerobic colony count (ACC) and Enterobacteriaceae colony count (ECC) using simulated methods and a freeze-dried standardised culture preparation. Trial A was based on a simulated swab test, Trial B a simulated meat excision test and Trial C was a reference test on reconstituted inoculum. Statistical analysis (ANOVA) was carried out before and after rejection of outlying data. Expanded uncertainty values (relative standard deviation x2) for repeatability and reproducibility, based on the log10 cfu/ml, on the ACC ranged from +/-2.1% to +/-2.7% and from +/-5.5% to +/-10.5%, respectively, depending upon the test procedure. Similarly for the ECC, expanded uncertainty estimates for repeatability and reproducibility ranged from +/-4.6% to +/-16.9% and from +/-21.6% to +/-23.5%, respectively. The results are discussed in relation to the potential application of the methods.

Effect of Time on Gypsum-Impression Material Compatibility

NASA Astrophysics Data System (ADS)

Won, John Boram

The purpose of this study was to evaluate the compatibility of dental gypsum with three recently introduced irreversible hydrocolloid (alginate) alternatives. The test materials were Alginot® (Kerr™), Position Penta Quick® (3M ESPE™) and Silgimix ® (Sultan Dental™). The irreversible hydrocolloid impression material, Jeltrate Plus antimicrobial® (Dentsply Caulk™) served as the control. Materials and Methods: Testing of materials was conducted in accordance with ANSI/ADA Specification No. 18 for Alginate Impression Materials. Statistical Analysis: The 3-Way ANOVA test was used to analyze measurements between different time points at a significance level of (p < 0.05). Outcome: It was found that there was greater compatibility between gypsum and the alternative materials over time than the traditional irreversible hydrocolloid material that was tested. A statistically significant amount of surface change/incompatibility was found over time with the combination of the dental gypsum products and the control impression material (Jeltrate Plus antimicrobial®).

Carbachol-Induced Signaling through Thr696-Phosphorylation of Myosin Phosphatase Targeting Subunit 1 (MYPT1) in rat Bladder Smooth Muscle Cells

PubMed Central

Alwaal, Amjad; Wang, Guifang; Banie, Lia; Lin, Ching-Shwun; Lin, Guiting; Lue, Tom F.

2016-01-01

Purpose Lines of evidence suggest that Rho-associated protein kinase (ROCK) mediated myosin phosphatase targeting subunit 1 (MYPT1) phosphorylation play a central role in smooth muscle contraction. However, the physiological significance of MYPT1 phosphorylation at Thr696 catalyzed by ROCK in bladder smooth muscle remains controversial. We attempt to directly observe the quantitative protein expression of RhoA/ROCK and phosphorylation of MYPT1 at Thr696 after carbachol administration in rat bladder smooth muscle cells (RBMSCs). Materials and Methods Primary cultured smooth muscle cells were obtained from rat bladders. The effects of both concentration and time-course induced by the muscarinic agonist carbachol were investigated by assessing the expression of Rho A/ROCK and MYPT1 phosphorylation at Thr696 using Western blot. Results In the dose-course studies, carbachol showed significant increase of phosphorylation of MYPT1 at Thr696 (p-MYPT1) from concentrations of 15 μM to 100 μM based on Western blot results (p < 0.05, ANOVA test). In the time-course studies, treatment of cells with 15 μM of carbachol significantly enhanced the expression of p-MYPT1 from 3 to 15 hr (p < 0.05, ANOVA test) and induced the expression of Rho A from 10 to 120 min (p < 0.05, ANOVA test). Conclusions Carbachol can induce the expression of ROCK pathway, leading to MYPT1 phosphorylation at Thr696 and thereby sustained RBSMCs contraction. PMID:27118568

Carbachol-induced signaling through Thr696-phosphorylation of myosin phosphatase-targeting subunit 1 (MYPT1) in rat bladder smooth muscle cells.

PubMed

Liu, Benchun; Lee, Yung-Chin; Alwaal, Amjad; Wang, Guifang; Banie, Lia; Lin, Ching-Shwun; Lin, Guiting; Lue, Tom F

2016-08-01

Lines of evidence suggest that Rho-associated protein kinase (ROCK)-mediated myosin phosphatase-targeting subunit 1 (MYPT1) phosphorylation plays a central role in smooth muscle contraction. However, the physiological significance of MYPT1 phosphorylation at Thr696 catalyzed by ROCK in bladder smooth muscle remains controversial. We attempt to directly observe the quantitative protein expression of Rho A/ROCK and phosphorylation of MYPT1 at Thr696 after carbachol administration in rat bladder smooth muscle cells (RBMSCs). Primary cultured smooth muscle cells were obtained from rat bladders. The effects of both concentration and time-course induced by the muscarinic agonist carbachol were investigated by assessing the expression of Rho A/ROCK and MYPT1 phosphorylation at Thr696 using Western blot. In the dose-course studies, carbachol showed significant increase in phosphorylation of MYPT1 at Thr696 (p-MYPT1) from concentrations of 15-100 μM based on Western blot results (p < 0.05, ANOVA test). In the time-course studies, treatment of cells with 15 μM of carbachol significantly enhanced the expression of p-MYPT1 from 3 to 15 h (p < 0.05, ANOVA test) and induced the expression of Rho A from 10 to 120 min (p < 0.05, ANOVA test). Carbachol can induce the expression of ROCK pathway, leading to MYPT1 phosphorylation at Thr696 and thereby sustained RBSMCs contraction.

Comparing the efficacy of mydriatic cocktail-soaked sponge and conventional pupil dilation in patients using tamsulosin – a randomized controlled trial

PubMed Central

2013-01-01

Background A strong association exists between the use of tamsulosin and the occurance of intraoperative floppy iris syndrome. Several methods were advocated to overcome the progressive intraopertive miosis. Our purpose was to investigate the effect of a mydriatic-cocktail soaked cellulose sponge on perioperative pupil diameter in tamsulosin-treated patients undergoing elective cataract surgery. Methods Patients using tamsulosin were dilated either with mydriatic-cocktail soaked sponge (group 1) or with conventional eyedrop regimen (group 2). Control patients not taking any α1 adrenergic receptor inhibtors were also dilated with mydriatic sponge (group 3). In all groups oxybuprocain 0.4%, cocain 4%, tropicamide 1%, phenylephrine 10%, diclophenac 0.1% along with chloramphenicol 0.5% were used preoperatively. Pupil diameter (mm) was measured preoperatively, after nucleus delivery, and before IOL implantation. Adverse effects associated with the use of sponge, minor and major intraoperative complications, the use of iris retractors and operation time were recorded. Differences in general between groups were analyzed with a one way analysis of variance (ANOVA); differences between groups in proportions were assessed by Fisher’s exact test. Results Mean pupil diameter (mm) was preopertively: 7.52 ± 1.21, 7.30 ± 1.55 and 7.99 ± 0.96 (ANOVA: p = 0.079); after nucleus delivery: 6 ± 1.20, 6.29 ± 1.12 and 6.52 ± 0.81 (ANOVA: p = 0.123); before IOL implantation: 5.46 ± 1.06, 5.83 ± 1.09 and 6.17 ± 0.89 (ANOVA: p = 0.0291). No adverse effect related to sponge use was detected. Frequency of minor complications, and iris hook use was similar in the two tamsulosin treated group. Operation time did not differ significantly in the three groups. Conclusion We have found that using a mydriatic cocktail-soaked wick – an alternative way to achieve intraoperative mydriasis for cataract surgery – was as effective and safe as the conventional repeated eyedrops regiment for tamsulosin treated patients. Trial registration Current Controlled Trials ISRCTN37834752 PMID:24359572

ERP evidence suggests executive dysfunction in ecstasy polydrug users.

PubMed

Roberts, C A; Fairclough, S H; Fisk, J E; Tames, F; Montgomery, C

2013-08-01

Deficits in executive functions such as access to semantic/long-term memory have been shown in ecstasy users in previous research. Equally, there have been many reports of equivocal findings in this area. The current study sought to further investigate behavioural and electro-physiological measures of this executive function in ecstasy users. Twenty ecstasy-polydrug users, 20 non-ecstasy-polydrug users and 20 drug-naïve controls were recruited. Participants completed background questionnaires about their drug use, sleep quality, fluid intelligence and mood state. Each individual also completed a semantic retrieval task whilst 64 channel Electroencephalography (EEG) measures were recorded. Analysis of Variance (ANOVA) revealed no between-group differences in behavioural performance on the task. Mixed ANOVA on event-related potential (ERP) components P2, N2 and P3 revealed significant between-group differences in the N2 component. Subsequent exploratory univariate ANOVAs on the N2 component revealed marginally significant between-group differences, generally showing greater negativity at occipito-parietal electrodes in ecstasy users compared to drug-naïve controls. Despite absence of behavioural differences, differences in N2 magnitude are evidence of abnormal executive functioning in ecstasy-polydrug users.

The protective effect of hydrogen sulfide (H2S) on traumatic brain injury (TBI) induced memory deficits in rats.

PubMed

Karimi, Seyed Asaad; Hosseinmardi, Narges; Janahmadi, Mahyar; Sayyah, Mohammad; Hajisoltani, Razieh

2017-09-01

Traumatic brain injury (TBI), as an expanding public health epidemic, is a common cause of death among youth. TBI is associated with cognitive deficits and memory impairment. Hydrogen sulfide (H 2 S), a novel gaseous mediator, has been recognized as an important neuromodulator and neuroprotective agent in the central nervous system. In the present study the potential neuroprotective role of sodium hydrosulfide (NaHS), an H 2 S donor on TBI induced memory deficit in a rat model of controlled cortical impact (CCI) injury was investigated. CCI model was used to induce TBI. Male rats were randomly assigned into the following groups: control, sham, sham treated with NaHS, TBI, and TBI treated with NaHS (3 and 5mg/kg). NaHS was injected intraperitoneally 5min before TBI induction. Learning and memory were assessed using Morris water maze (MWM) on days 8-12 following injury. CCI resulted in MWM deficits. Injured animals showed a slower rate of acquisition with respect to the sham-operated animals [F (1, 24)=13.97, P<0.01, two-way ANOVA]. NaHS improved spatial memory impairment of injured rats. Treatment with NaHS (5 mg/kg) decreased the escape latency [F (1, 24)=7.559, P<0.05, two-way ANOVA] and traveled distance [F (1, 12)=6.398, P<0.05, Two way ANOVA)]. In probe test, injured animals spent less time in target zone (P<0.05, unpaired t-test) and NaHS did not have any effect on this parameter (p>0.05, one way ANOVA). These findings suggest that NaHS has a neuroprotective effect on TBI-induced memory impairment in rats. Copyright © 2017 Elsevier Inc. All rights reserved.

Effects of long-term fixed orthodontic treatment on salivary nickel and chromium levels: a 1-year prospective cohort study.

PubMed

Amini, Fariborz; Rakhshan, Vahid; Mesgarzadeh, Nasim

2012-12-01

Effect of long-term orthodontic treatment on salivary nickel and chromium has not been quite assessed except in few retrospective studies with controversial results. The aim of this prospective study was to measure salivary levels of these ions during 1 year of orthodontic treatment. Saliva samples were collected from 20 orthodontic patients, before treatment (control) and 6 and 12 months later. Nickel and chromium concentrations were determined using atomic absorption spectrophotometry. Data were analyzed using one- and two-way repeated-measures ANOVA, Bonferroni, Friedman (α = 0.05), and Wilcoxon signed-ranks tests (α = 0.016). Average nickel level changed from 9.75 ± 5.02 to 10.37 ± 6.94 and then to 8.32 ± 4.36 μg/L in 1 year. Average chromium concentration changed from 3.86 ± 1.34 to 4.6 ± 6.11 and then to 2.04 ± 1.66 μg/L. Alterations in nickel values were not statistically significant [P = 0.468 (ANOVA)], but fluctuations in chromium levels were [P = 0.021 (Friedman)]. The decrease in chromium concentration after 12 months was significant compared to the control [P = 0.004 (Wilcoxon)]. Although slightly increased after 6 months, the concentration of both ions dropped to levels slightly lower than the control groups after 12 months.

The Short-Term Effects of Lying, Sitting and Standing on Energy Expenditure in Women

PubMed Central

POPP, COLLIN J.; BRIDGES, WILLIAM C.; JESCH, ELLIOT D.

2018-01-01

The deleterious health effects of too much sitting have been associated with an increased risk for overweight and obesity. Replacing sitting with standing is the proposed intervention to increase daily energy expenditure (EE). The purpose of this study was to determine the short-term effects of lying, sitting, and standing postures on EE, and determine the magnitude of the effect each posture has on EE using indirect calorimetry (IC). Twenty-eight healthy females performed three separate positions (lying, sitting, standing) in random order. Inspired and expired gases were collected for 45-minutes (15 minutes for each position) using breath-by-breath indirect calorimetry. Oxygen consumption (VO2) and carbon dioxide production (VCO2) were measured to estimate EE. Statistical analyses used repeat measures ANOVA to analyze all variables and post hoc t-tests. Based on the ANOVA the individual, time period and order term did not result in a statistically significant difference. Lying EE and sitting EE were not different from each other (P = 0.56). However, standing EE (kcal/min) was 9.0 % greater than lying EE (kcal/min) (P = 0.003), and 7.1% greater than sitting EE (kcal/min) (P = 0.02). The energetic cost of standing was higher compared to lying and sitting. While this is statistically significant, the magnitude of the effect of standing when compared to sitting was small (Cohen’s d = 0.31). Short-term standing does not offer an energetic advantage when compared to sitting.

Accuracy of different impression materials in parallel and nonparallel implants

PubMed Central

Vojdani, Mahroo; Torabi, Kianoosh; Ansarifard, Elham

2015-01-01

Background: A precise impression is mandatory to obtain passive fit in implant-supported prostheses. The aim of this study was to compare the accuracy of three impression materials in both parallel and nonparallel implant positions. Materials and Methods: In this experimental study, two partial dentate maxillary acrylic models with four implant analogues in canines and lateral incisors areas were used. One model was simulating the parallel condition and the other nonparallel one, in which implants were tilted 30° bucally and 20° in either mesial or distal directions. Thirty stone casts were made from each model using polyether (Impregum), additional silicone (Monopren) and vinyl siloxanether (Identium), with open tray technique. The distortion values in three-dimensions (X, Y and Z-axis) were measured by coordinate measuring machine. Two-way analysis of variance (ANOVA), one-way ANOVA and Tukey tests were used for data analysis (α = 0.05). Results: Under parallel condition, all the materials showed comparable, accurate casts (P = 0.74). In the presence of angulated implants, while Monopren showed more accurate results compared to Impregum (P = 0.01), Identium yielded almost similar results to those produced by Impregum (P = 0.27) and Monopren (P = 0.26). Conclusion: Within the limitations of this study, in parallel conditions, the type of impression material cannot affect the accuracy of the implant impressions; however, in nonparallel conditions, polyvinyl siloxane is shown to be a better choice, followed by vinyl siloxanether and polyether respectively. PMID:26288620

Comparing preseason frontal and sagittal plane plyometric programs on vertical jump height in high-school basketball players.

PubMed

King, Jeffrey A; Cipriani, Daniel J

2010-08-01

The primary purpose of this study was to evaluate whether frontal plane (FP) plyometrics, which are defined as plyometrics dominated with a lateral component, would produce similar increases in vertical jump height (VJH) compared to sagittal plane (SP) Plyometrics. Thirty-two junior varsity and varsity high-school basketball players participated in 6 weeks of plyometric training. Players participated in either FP or SP plyometrics for the entire study. Vertical jump height was measured on 3 occasions: preintervention (baseline), at week 3 of preparatory training, and at week 6 of training. Descriptive statistics were calculated for VJH. A 2-way analysis of variance (ANOVA) with repeated measures was used to test the difference in mean vertical jump scores using FP and SP training modalities. Results showed a significant effect over time for vertical jump (p < 0.001). Moreover, a significant time by protocol interaction was noted (p < 0.032). A 1-way ANOVA demonstrated that only the SP group demonstrated improvements over time, in VJH, p < 0.05. The FP group did not improve statistically. The data from this study suggest that FP plyometric training did not have a significant effect on VJH and significant improvement in VJH was seen in subjects participating in SP plyometrics thus reinforcing the specificity principle of training. However, coaches should implement both types of plyometrics because both training modalities can improve power and quickness among basketball players.

Longitudinal change in dysarthria associated with Friedreich ataxia: a potential clinical endpoint.

PubMed

Rosen, Kristin M; Folker, Joanne E; Vogel, Adam P; Corben, Louise A; Murdoch, Bruce E; Delatycki, Martin B

2012-11-01

CNS functions that show change across short periods of time are particularly useful clinical endpoints for Friedreich ataxia. This study determined whether there is measurable acoustical change in the dysarthria associated with Friedreich ataxia across yearly intervals. A total of 29 participants diagnosed with Friedreich ataxia were recorded across 4 years at yearly intervals. A repeated measures ANOVA was used to determine which acoustic measures differed across time, and pairwise t tests were used to assess the consistency of the change across the time intervals. The relationship between the identified measures with perceptual severity was assessed with stepwise regression. Significant longitudinal change was observed with four measures that relate to the utterance duration and spectral changes in utterances. The spectral measures consistently detected change across time intervals of two or more years. The four measures combined moderately predicted perceptual severity. Together, the results implicate longitudinal change in speaking rate and utterance duration. Changes in speech associated with Friedreich ataxia can be measured across intervals of 2 years and therefore show rich potential for monitoring disease progression and therapy outcomes.

Effect of pressure of helium, argon, krypton, and xenon on the porosity, microstructure, and mechanical properties of commercially pure titanium castings.

PubMed

Zinelis, S

2000-11-01

Porosity is a frequently observed casting defect in dental titanium alloys. This study evaluated the effect of pressure of helium, argon, krypton, and xenon on the porosity, microstructure, and mechanical properties of commercially pure titanium (cp Ti) castings. Eight groups (A-H) of 16 rectangular wax patterns each (30 mm in length, 3 mm in width, and 1 mm in depth) were prepared. The wax patterns were invested with a magnesia-based material and cast with cp Ti (grade II). Groups A, C, E, and G were cast under a pressure of 1 atm, and groups B, D, F, and H were cast under a pressure of 0.5 atm of He, Ar, Kr, and Xe, respectively. The extent of the porosity of the cast specimens was determined radiographically and quantified by image analysis. Three specimens of each group and 3 cylinders of the as-received cp Ti used as a reference were embedded in resin and studied metallographically after grinding, polishing, and chemical etching. These surfaces were used for determination of the Vickers hardness (VHN) as well. Eight specimens from each group were fractured in the tensile mode, and the 0.2% yield strength, fracture stress, and percentage elongation were calculated. Porosity was analyzed with 2-way ANOVA and the Newman-Keuls multiple range test. VHN measurements and tensile properties for specimen groups were compared with 1-way ANOVA and the Newman-Keuls multiple range test (95% significance level). The porosity levels per group were (%): A = 5.50 +/- 4.34, B = 0.77 +/- 1.27, C = 2.44 +/- 3.68, D = 0.06 +/- 0.12, E-H = 0. Two-way ANOVA showed that there was no detectable interaction (P<.05) between gas type and applied pressure. Metallographic examination revealed no differences in microstructure among the groups studied. A finer grain size was observed in all cast groups compared with the original cp Ti. The VHN of the as-received cp Ti was significantly greater than all the cast groups tested. Groups cast under He showed the highest VHN, yield strength, and fracture stress. No significant differences were found in percentage elongation values among the groups. Porosity and mechanical properties of cp Ti castings are dependent on the gas type and pressure, whereas the microstructure remains unaffected.

The effects of guided inquiry instruction on student achievement in high school biology

NASA Astrophysics Data System (ADS)

Vass, Laszlo

The purpose of this quantitative, quasi-experimental study was to measure the effect of a student-centered instructional method called guided inquiry on the achievement of students in a unit of study in high school biology. The study used a non-random sample of 109 students, the control group of 55 students enrolled in high school one, received teacher centered instruction while the experimental group of 54 students enrolled at high school two received student-centered, guided inquiry instruction. The pretest-posttest design of the study analyzed scores using an independent t-test, a dependent t-test (p = <.001), an ANCOVA (p = .007), mixed method ANOVA (p = .024) and hierarchical linear regression (p = <.001). The experimental group that received guided inquiry instruction had statistically significantly higher achievement than the control group.

The Attachment and Clinical Issues Questionnaire: a new methodology for science and practice in criminology and forensics.

PubMed

Lindberg, Marc A; Fugett, April; Lounder, Lindsay

2014-10-01

Most modern theories suggest that interpersonal relationships are of central importance in the development of criminal behavior. We tested the parent attachment scales of a new research and clinical measure, the Attachment and Clinical Issues Questionnaire (ACIQ). It is a 29-scale battery assessing attachments to mother, father, partner, and peers, which also includes several related clinical scales. Sixty-one (18-20 years of age) male offenders from a maximum security detention center and 131 contrasts completed the ACIQ. ANOVA demonstrated that mother and father attachments displayed different patterns. The attachment scales also predicted the numbers of crimes within the population of juvenile offenders. Thus, the parent attachment scales of the ACIQ showed promise as an instrument to test dynamic systems approaches to developmental models of criminal behavior. © The Author(s) 2013.

Comparison of the frictional characteristics of aesthetic orthodontic brackets measured using a modified in vitro technique

PubMed Central

Arici, Nursel

2015-01-01

Objective The coefficients of friction (COFs) of aesthetic ceramic and stainless steel brackets used in conjunction with stainless steel archwires were investigated using a modified linear tribometer and special computer software, and the effects of the bracket slot size (0.018 inches [in] or 0.022 in) and materials (ceramic or metal) on the COF were determined. Methods Four types of ceramic (one with a stainless steel slot) and one conventional stainless steel bracket were tested with two types of archwire sizes: a 0.017 × 0.025-in wire in the 0.018-in slots and a 0.019 × 0.025-in wire in the 0.022-in slot brackets. For pairwise comparisons between the 0.018-in and 0.022-in slot sizes in the same bracket, an independent sample t-test was used. One-way and two-way analysis of variance (ANOVA) and Tukey's post-hoc test at the 95% confidence level (α = 0.05) were also used for statistical analyses. Results There were significant differences between the 0.022-in and 0.018-in slot sizes for the same brand of bracket. ANOVA also showed that both slot size and bracket slot material had significant effects on COF values (p < 0.001). The ceramic bracket with a 0.022-in stainless steel slot showed the lowest mean COF (µ = 0.18), followed by the conventional stainless steel bracket with a 0.022-in slot (µ = 0.21). The monocrystalline alumina ceramic bracket with a 0.018-in slot had the highest COF (µ = 0.85). Conclusions Brackets with stainless steel slots exhibit lower COFs than ceramic slot brackets. All brackets show lower COFs as the slot size increases. PMID:25667915

Digestion-resistant maltodextrin effects on colonic transit time and stool weight: a randomized controlled clinical study.

PubMed

Abellán Ruiz, María Salud; Barnuevo Espinosa, María Dolores; Contreras Fernández, Carlos J; Luque Rubia, Antonio J; Sánchez Ayllón, Francisca; Aldeguer García, Miriam; García Santamaría, Carlos; López Román, Francisco Javier

2016-12-01

Increased awareness of the importance of dietary fibre has led to increased interest in "functional" fibre components like digestion-resistant maltodextrin (RMD). This randomized, placebo-controlled, double-blind study assessed the effects of RMD in the colonic transit time (CTT) and defecation characteristics (frequency, stool volume and consistency). Sixty-six healthy adult volunteers (32 men) who did not have a daily defecation habit had a 7-day run-in period before the 21-day intervention period with RMD or placebo. CTT and segmental CTT (SCTT) were assessed by a single abdominal X-ray film taken at the end of both periods after radiopaque marker ingestion. Defecation characteristics and intestinal functions were also assessed, which were self-reported by patients. Intragroup comparisons were evaluated by Student's paired t test, Bonferroni test and Chi-square test, while time comparisons by analysis of variance (ANOVA) and time-by-treatment interaction by repeated-measures ANOVA. Fifty-seven subjects were assessed for CTT (placebo, n = 28; RMD, n = 29). In the RMD group, the total CTT, left SCTT and rectosigmoidal SCTT decreased significantly compared to baseline (p < 0.01 each; -13.3, -4.7, -8.7 h, respectively). Significant differences between groups were observed in total CTT and left SCTT. Significant time-by-treatment interaction was observed in the RMD group for stool volume (p = 0.014), increasing 56 % compared to baseline (p < 0.01), while remained unchanged in the placebo group. Stool consistency was improved only in the RMD group (p < 0.01). No adverse effects related to study products were observed. The results show that RMD improved CTT, stool volume, stool consistency and some intestinal functions in a healthy population.

Does Kinesiology tape counter exercise-related impairments of balance in the elderly?

PubMed

Hosp, Simona; Csapo, Robert; Heinrich, Dieter; Hasler, Michael; Nachbauer, Werner

2018-05-01

Maintaining balance is an essential requirement for the performance of daily tasks and sporting activities, particularly in older adults to prevent falls and associated injuries. Kinesiology tape has gained great popularity in sports and is frequently used as a tool for performance enhancement. However, there is little research investigating its influence on balance. The purpose of this study was to evaluate the effect of Kinesiology tape on dynamic balance, postural stability and knee proprioception after physical activity in healthy, older adults. Twelve physically active, healthy men aged 63-77 years performed the test on two separate days, with and without Kinesiology tape at the knee joint (prospective intervention with cross-over design). Dynamic balance during an obstacle-crossing task, postural stability in a single-leg stance test, and knee joint position sense as a measure of proprioception were examined before and after 30 min of downhill walking on a treadmill. The influences of taping condition and physical activity on all parameters were statistically tested using factorial ANOVAs. Factorial ANOVA revealed significant time × taping condition interaction effects on all performance parameters (p < 0.05), indicating that the exercise-related changes in dynamic balance, postural stability and knee proprioception differed between the two taping conditions. The deterioration of performance was always greater when no tape was used. This study demonstrated that physical exercise significantly deteriorated dynamic balance, postural stability and knee proprioception in older men. These effects can be attenuated through the usage of Kinesiology tape. By preventing exercise-related impairments of balance, Kinesiology tape might help reduce the risk of sports-associated falls and associated injuries. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluation of microhardness, surface roughness, and wear behavior of different types of resin composites polymerized with two different light sources.

PubMed

Topcu, Fulya Toksoy; Erdemir, Ugur; Sahinkesen, Gunes; Yildiz, Esra; Uslan, Ibrahim; Acikel, Cengizhan

2010-02-01

The microhardness, surface roughness and wear resistance of different types of resin composites, polymerized by a Quartz Tungsten Halogen (QTH) or Light Emitting Diode (LED) light curing units (LCU) were evaluated in this in vitro study. Cylindrical blocks were prepared from composites (8 mm in diameter, and 2 mm in thickness) and polymerized by a LED or a QTH LCU. Vickers hardness was measured on the top and bottom surfaces of the specimens. Surface roughness was measured with a surface profilometer on the top of the specimens. For the wear test, specimens were tested in a conventional pin-on-disc tribology machine under 15 N loads. The statistical analyses were performed by one-way analysis of variance (ANOVA) and t-tests, including the Bonferroni correction. Nanocomposite material Clearfil Majesty Posterior showed the highest hardness values in all polymerization types at the top and bottom surfaces (p < 0.05). Microhybrid Clearfil APX and hybrid Quixfil composites demonstrated the greatest surface roughness. Wear resistance of Clearfil Majesty Posterior was found to be the highest among the other tested resin composites. The results indicated that Clearfil Majesty Posterior demonstrated higher microhardness, less surface roughness, and higher wear resistance when compared with the other tested materials for both polymerization types.

The effect of shoe type on static and dynamic balance during treadmill walking in young healthy women.

PubMed

Kim, Mi-Kyoung; Kong, Byung-Sun; Yoo, Kyung-Tae

2017-09-01

[Purpose] The purpose of this study was to analyze the effect of various shoes on the static and dynamic balance of young women in their 20s. [Subjects and Methods] The subjects of the study were 15 healthy young women and repeated measured design. The subjects walked on the treadmill at a speed of 4 km/h for 30 minutes wearing three types of shoes: sneaker, rain boots, and combat boots. Balance was measured by a Romberg test and a limits of stability test. One-way ANOVA was used for statistical analysis. [Results] As the results of the Romberg test, the main effect of time was shown in the EO-COG area, EO-COG length, and EO-COG velocity. As the results of the limits of stability test, the main effects of time in LT, RT, FW, and total. There were significant differences in the LT in the sneaker group, the rain boots group, and the LT and RT in the combat boots group between the pre- and post-test. [Conclusion] The characteristics of shoes such as the materials, hardness, and thickness of the soles, the coefficient of friction of the outsoles, and the collar height affected the static and dynamic balance.

The effect of shoe type on static and dynamic balance during treadmill walking in young healthy women

PubMed Central

Kim, Mi-Kyoung; Kong, Byung-Sun; Yoo, Kyung-Tae

2017-01-01

[Purpose] The purpose of this study was to analyze the effect of various shoes on the static and dynamic balance of young women in their 20s. [Subjects and Methods] The subjects of the study were 15 healthy young women and repeated measured design. The subjects walked on the treadmill at a speed of 4 km/h for 30 minutes wearing three types of shoes: sneaker, rain boots, and combat boots. Balance was measured by a Romberg test and a limits of stability test. One-way ANOVA was used for statistical analysis. [Results] As the results of the Romberg test, the main effect of time was shown in the EO-COG area, EO-COG length, and EO-COG velocity. As the results of the limits of stability test, the main effects of time in LT, RT, FW, and total. There were significant differences in the LT in the sneaker group, the rain boots group, and the LT and RT in the combat boots group between the pre- and post-test. [Conclusion] The characteristics of shoes such as the materials, hardness, and thickness of the soles, the coefficient of friction of the outsoles, and the collar height affected the static and dynamic balance. PMID:28932007

Comparison of Diagnostic Accuracy between Octopus 900 and Goldmann Kinetic Visual Fields

PubMed Central

Rowe, Fiona J.; Rowlands, Alison

2014-01-01

Purpose. To determine diagnostic accuracy of kinetic visual field assessment by Octopus 900 perimetry compared with Goldmann perimetry. Methods. Prospective cross section evaluation of 40 control subjects with full visual fields and 50 patients with known visual field loss. Comparison of test duration and area measurement of isopters for Octopus 3, 5, and 10°/sec stimulus speeds. Comparison of test duration and type of visual field classification for Octopus versus Goldmann perimetry. Results were independently graded for presence/absence of field defect and for type and location of defect. Statistical evaluation comprised of ANOVA and paired t test for evaluation of parametric data with Bonferroni adjustment. Bland Altman and Kappa tests were used for measurement of agreement between data. Results. Octopus 5°/sec perimetry had comparable test duration to Goldmann perimetry. Octopus perimetry reliably detected type and location of visual field loss with visual fields matched to Goldmann results in 88.8% of results (K = 0.775). Conclusions. Kinetic perimetry requires individual tailoring to ensure accuracy. Octopus perimetry was reproducible for presence/absence of visual field defect. Our screening protocol when using Octopus perimetry is 5°/sec for determining boundaries of peripheral isopters and 3°/sec for blind spot mapping with further evaluation of area of field loss for defect depth and size. PMID:24587983

Bootstrapping in Applied Linguistics: Assessing Its Potential Using Shared Data

ERIC Educational Resources Information Center

Plonsky, Luke; Egbert, Jesse; Laflair, Geoffrey T.

2015-01-01

Parametric analyses such as t tests and ANOVAs are the norm--if not the default--statistical tests found in quantitative applied linguistics research (Gass 2009). Applied statisticians and one applied linguist (Larson-Hall 2010, 2012; Larson-Hall and Herrington 2010), however, have argued that this approach may not be appropriate for small samples…

The Influence of Ability Grouping on Math Achievement in a Rural Middle School

ERIC Educational Resources Information Center

Pritchard, Robert R.

2012-01-01

The researcher examined the academic performance of low-tracked students (n = 156) using standardized math test scores to determine whether there is a statistically significant difference in achievement depending on academic environment, tracked or nontracked. An analysis of variance (ANOVA) was calculated, using a paired samples t-test for a…

The Socratic Method: Empirical Assessment of a Psychology Capstone Course

ERIC Educational Resources Information Center

Burns, Lawrence R.; Stephenson, Paul L.; Bellamy, Katy

2016-01-01

Although students make some epistemological progress during college, most graduate without developing meaning-making strategies that reflect an understanding that knowledge is socially constructed. Using a pre-test-post-test design and a within-subjects 2 × 2 mixed-design ANOVA, this study reports on empirical findings which support the Socratic…

Goodness-Of-Fit Test for Nonparametric Regression Models: Smoothing Spline ANOVA Models as Example.

PubMed

Teran Hidalgo, Sebastian J; Wu, Michael C; Engel, Stephanie M; Kosorok, Michael R

2018-06-01

Nonparametric regression models do not require the specification of the functional form between the outcome and the covariates. Despite their popularity, the amount of diagnostic statistics, in comparison to their parametric counter-parts, is small. We propose a goodness-of-fit test for nonparametric regression models with linear smoother form. In particular, we apply this testing framework to smoothing spline ANOVA models. The test can consider two sources of lack-of-fit: whether covariates that are not currently in the model need to be included, and whether the current model fits the data well. The proposed method derives estimated residuals from the model. Then, statistical dependence is assessed between the estimated residuals and the covariates using the HSIC. If dependence exists, the model does not capture all the variability in the outcome associated with the covariates, otherwise the model fits the data well. The bootstrap is used to obtain p-values. Application of the method is demonstrated with a neonatal mental development data analysis. We demonstrate correct type I error as well as power performance through simulations.

Retentive force and microleakage of stainless steel crowns cemented with three different luting agents.

PubMed

Yilmaz, Yucel; Dalmis, Anya; Gurbuz, Taskin; Simsek, Sera

2004-12-01

The aim of this investigation was to compare the tensile strength, microleakage, and Scanning Electron Microscope (SEM) evaluations of SSCs cemented using different adhesive cements on primary molars. Sixty-three extracted primary first molars were used. Tooth preparations were done. Crowns were altered and adapted for investigation purpose, and then cemented using glass ionomer cement (Aqua Meron), resin modified cement (RelyX Luting), and resin cement (Panavia F) on the prepared teeth. Samples were divided into two groups of 30 samples each for tensile strength and microleakage tests. The remaining three samples were used for SEM evaluation. Data were analyzed with one-way ANOVA and Tukey test. The statistical analysis of ANOVA revealed significant differences among the groups for both tensile strength and microleakage tests (p < 0.05). Tukey test showed statistically significant difference between Panavia F and RelyX Luting (p < 0.05), but none between the others (p > 0.05). This study showed that the higher the retentive force a crown possessed, the lower would be the possibility of microleakage.

Characterization of third-body media particles and their effect on in vitro composite wear

PubMed Central

Lawson, Nathaniel C.; Cakir, Deniz; Beck, Preston; Litaker, Mark S.; Burgess, John O.

2012-01-01

Objectives The purpose of this study was to compare four medium particles currently used for in vitro composite wear testing (glass and PMMA beads and millet and poppy seeds). Methods Particles were prepared as described in previous wear studies. Hardness of medium particles was measured with a nano-indentor, particle size was measured with a particle size analyzer, and the particle form was determined with light microscopy and image analysis software. Composite wear was measured using each type of medium and water in the Alabama wear testing device. Four dental composites were compared: a hybrid (Z100), flowable microhybrid (Estelite Flow Quick), micromatrix (Esthet-X), and nano-filled (Filtek Supreme Plus). The test ran for 100,000 cycles at 1.2Hz with 70N force by a steel antagonist. Volumetric wear was measured by non-contact profilometry. A two-way analysis of variance (ANOVA) and Tukey's test was used to compare both materials and media. Results Hardness values (GPa) of the particles are (glass, millet, PMMA, poppy respectively): 1.310(0.150), 0.279(.170), 0.279(0.095), and 0.226(0.146). Average particle sizes (μm) are (glass, millet, PMMA, poppy respectively): 88.35(8.24), 8.07(4.05), 28.95(8.74), and 14.08(7.20). Glass and PMMA beads were considerably more round than the seeds. During composite wear testing, glass was the only medium that produced more wear than the use of water alone. The rank ordering of the materials varied with each medium, however, the glass and PMMA bead medium allowed better discrimination between materials. Significance PMMA beads are a practical and relevant choice for composite wear testing because they demonstrate similar physical properties as seeds but reduce the variability of wear measurements. PMID:22578990

Protocol for statistical analysis of vegetation changes at Catoctin Mountain Park

USGS Publications Warehouse

Hatfield, Jeff S.; Krafft, Cairn

2010-01-01

Vegetation data collected at Catoctin Mountain Park, Maryland, in a split-panel rotation design during 2004-2009 were analyzed for differences among three regions within the park and among years. Six plots were paired with plots fenced to exclude white-tailed deer (Odocoileus virginianus), and differences between open and exclosed plots were also investigated. Repeated measures analysis of variance (ANOVA) was used to test for differences in the following variables: percentage of twigs browsed, percentage of canopy cover, and number of tree and shrub seedlings in each of five height classes. Except for some differences in numbers of tree and shrub seedlings among height classes among the regions, no differences (P > 0.05) were found among the regions or over time in the variables measured. Recommendations for future sampling and analysis are discussed.

Polyphenol-rich diets improve glucose metabolism in people at high cardiometabolic risk: a controlled randomised intervention trial.

PubMed

Bozzetto, Lutgarda; Annuzzi, Giovanni; Pacini, Giovanni; Costabile, Giuseppina; Vetrani, Claudia; Vitale, Marilena; Griffo, Ettore; Giacco, Angela; De Natale, Claudia; Cocozza, Sara; Della Pepa, Giuseppe; Tura, Andrea; Riccardi, Gabriele; Rivellese, Angela A

2015-07-01

Dietary polyphenols and long chain n-3 polyunsaturated fatty acids (LCn3) are associated with lower cardiovascular risk. This may relate to their influence on glucose metabolism and diabetes risk. We evaluated the effects of diets naturally rich in polyphenols and/or LCn3 of marine origin on glucose metabolism in people at high cardiometabolic risk. According to a 2 × 2 factorial design, individuals with high waist circumference and at least one more component of the metabolic syndrome were recruited at the obesity outpatient clinic. Eighty-six participants were randomly assigned by MINIM software to an isoenergetic diet: (1) control, low in LCn3 and polyphenol (analysed n = 20); (2) rich in LCn3 (n = 19); (3) rich in polyphenols (n = 19); or (4) rich in LCn3 and polyphenols (n = 19). The assigned diets were known for the participants and blinded for people doing measurements. Before and after the 8 week intervention, participants underwent a 3 h OGTT and a test meal with a similar composition as the assigned diet for the evaluation of plasma glucose, insulin and glucagon-like peptide 1 (GLP-1) concentrations, and indices of insulin sensitivity and beta cell function. During OGTT, polyphenols significantly reduced plasma glucose total AUC (p = 0.038) and increased early insulin secretion (p = 0.048), while LCn3 significantly reduced beta cell function (p = 0.031) (two-factor ANOVA). Moreover, polyphenols improved post-challenge oral glucose insulin sensitivity (OGIS; p = 0.05 vs control diet by post hoc ANOVA). At test meal, LCn3 significantly reduced GLP-1 total postprandial AUC (p < 0.001; two-factor ANOVA). Diets naturally rich in polyphenols reduce blood glucose response, likely by increasing early insulin secretion and insulin sensitivity. These effects may favourably influence diabetes and cardiovascular risk. The implications of the decrease in insulin secretion and postprandial GLP-1 observed with diets rich in marine LCn3 need further clarification. ClinicalTrials.gov NCT01154478. The trial was funded by European Community's Seventh Framework Programme FP7/2009-2012 under grant agreement FP7-KBBE-222639, Etherpaths Project and 'Ministero Istruzione Università e Ricerca' PRIN 2010-2011 - 2010JCWWKM.

Evaluation of Three Different Processing Techniques in the Fabrication of Complete Dentures

PubMed Central

Chintalacheruvu, Vamsi Krishna; Balraj, Rajasekaran Uttukuli; Putchala, Lavanya Sireesha; Pachalla, Sreelekha

2017-01-01

Aims and Objectives: The objective of the present study is to compare the effectiveness of three different processing techniques and to find out the accuracy of processing techniques through number of occlusal interferences and increase in vertical dimension after denture processing. Materials and Methods: A cross-sectional study was conducted on a sample of 18 patients indicated for complete denture fabrication was selected for the study and they were divided into three subgroups. Three processing techniques, compression molding and injection molding using prepolymerized resin and unpolymerized resin, were used to fabricate dentures for each of the groups. After processing, laboratory-remounted dentures were evaluated for number of occlusal interferences in centric and eccentric relations and change in vertical dimension through vertical pin rise in articulator. Data were analyzed using statistical test ANOVA and SPSS software version 19.0 by IBM was used. Results: Data obtained from three groups were subjected to one-way ANOVA test. After ANOVA test, results with significant variations were subjected to post hoc test. Number of occlusal interferences with compression molding technique was reported to be more in both centric and eccentric positions as compared to the two injection molding techniques with statistical significance in centric, protrusive, right lateral nonworking, and left lateral working positions (P < 0.05). Mean vertical pin rise (0.52 mm) was reported to more in compression molding technique as compared to injection molding techniques, which is statistically significant (P < 0.001). Conclusions: Within the limitations of this study, injection molding techniques exhibited less processing errors as compared to compression molding technique with statistical significance. There was no statistically significant difference in processing errors reported within two injection molding systems. PMID:28713763

Comparative study on bioremediation of heavy metals by solitary ascidian, Phallusia nigra, between Thoothukudi and Vizhinjam ports of India.

PubMed

Abdul Jaffar Ali, H; Tamilselvi, M; Akram, A Soban; Kaleem Arshan, M L; Sivakumar, V

2015-11-01

Ascidians belonging to the sub-phylum Uro-chordata are used as potential model organisms in various parts of the world for biosorption of metals. The sedentary nature, filter feeding habits, presence of vanadocytes and the absence of kidneys cause them to accumulate metals. The present study was aimed to compare biosorption of metals such as cadmium, copper, lead, mercury and vanadium in test and mantle body of solitary ascidian Phallusia nigra between two ecologically significant stations such as Thoothukudi (Station 1) and Vizhinjam (Station 2) ports of India. Monthly samplings of water and P. nigra were done for a period of one year from September 2010 to August 2011 and subjected to analysis of metal accumulation. The average metal concentrations except mercury in the Thoothukudi water were found to be higher of comparable magnitudes than the Vizhinjam water. One-way ANOVA showed significant differences between the stations. A comparison of average metal concentrations in the test and mantle body of P. nigra between two stations showed that the enrichment of V, Cd, Pb, Cu and Hg in the Thoothukudi samples may be due to high bioaccumulation factors of these elements as compared to other species of ascidians. The bioaccumulation factors were in the order of V>Pb>Cd>Cu> Hg for the test and mantle body in stations 1 and 2. Application of one-way ANOVA for the concentration of these metals between test and mantle body showed significant differences in both stations. Similarly, ANOVA for biosorption of these trace metals by P. nigra showed significant difference between stations. Metal concentrations recorded in this ascidian could effectively be used as good reference material for monitoring metal contamination in Indian sea waters. Copyright © 2015 Elsevier Inc. All rights reserved.

Evaluation of Three Different Processing Techniques in the Fabrication of Complete Dentures.

PubMed

Chintalacheruvu, Vamsi Krishna; Balraj, Rajasekaran Uttukuli; Putchala, Lavanya Sireesha; Pachalla, Sreelekha

2017-06-01

The objective of the present study is to compare the effectiveness of three different processing techniques and to find out the accuracy of processing techniques through number of occlusal interferences and increase in vertical dimension after denture processing. A cross-sectional study was conducted on a sample of 18 patients indicated for complete denture fabrication was selected for the study and they were divided into three subgroups. Three processing techniques, compression molding and injection molding using prepolymerized resin and unpolymerized resin, were used to fabricate dentures for each of the groups. After processing, laboratory-remounted dentures were evaluated for number of occlusal interferences in centric and eccentric relations and change in vertical dimension through vertical pin rise in articulator. Data were analyzed using statistical test ANOVA and SPSS software version 19.0 by IBM was used. Data obtained from three groups were subjected to one-way ANOVA test. After ANOVA test, results with significant variations were subjected to post hoc test. Number of occlusal interferences with compression molding technique was reported to be more in both centric and eccentric positions as compared to the two injection molding techniques with statistical significance in centric, protrusive, right lateral nonworking, and left lateral working positions ( P < 0.05). Mean vertical pin rise (0.52 mm) was reported to more in compression molding technique as compared to injection molding techniques, which is statistically significant ( P < 0.001). Within the limitations of this study, injection molding techniques exhibited less processing errors as compared to compression molding technique with statistical significance. There was no statistically significant difference in processing errors reported within two injection molding systems.

Fracture strength of lithium disilicate crowns compared to polymer-infiltrated ceramic-network and zirconia reinforced lithium silicate crowns.

PubMed

Sieper, Kim; Wille, Sebastian; Kern, Matthias

2017-10-01

The aim of this study was to evaluate the fracture strength of crowns made from current CAD/CAM materials. In addition the influence of crown thickness and chewing simulation on the fracture strength was evaluated. Crowns were fabricated from lithium disilicate, zirconia reinforced lithium silicate (ZLS-ceramic) and a polymer-infiltrated ceramic-network (PICN) with an occlusal thickness of 1.0mm or 1.5mm, respectively (n=16). Crowns were cemented on composite dies. Subgroups of eight specimens were loaded with 5kg in a chewing simulator for 1,200,000 cycles with thermal cycling. Finally, all specimens were loaded until fracture in a universal testing machine. Three-way ANOVA was used to detect statistical interaction. Differences regarding the materials were tested with two-way ANOVA, following one-way ANOVA and a post-hoc Tukey's-Test. All crowns survived the chewing simulation. The material had a significant influence on the fracture resistance (p≤0.05). Lithium disilicate achieved the highest values of fracture strength in almost all groups followed by ZLS-ceramic. PICN achieved the lowest values of fracture strength. Chewing simulation increased the fracture strength of thick lithium disilicate crown significantly. Greater occlusal thickness of all crown materials resulted in higher crown fracture strength before chewing simulation. After chewing simulation occlusal thickness of lithium disilicate and PICN crowns had no significant influence on the fracture strength. All crowns revealed fracture strength above the clinically expected loading forces. Therefore the durability of the tested CAD/CAM materials seems promising also in an occlusal thickness of 1.0mm. Copyright © 2017 Elsevier Ltd. All rights reserved.

Error quantification of osteometric data in forensic anthropology.

PubMed

Langley, Natalie R; Meadows Jantz, Lee; McNulty, Shauna; Maijanen, Heli; Ousley, Stephen D; Jantz, Richard L

2018-06-01

This study evaluates the reliability of osteometric data commonly used in forensic case analyses, with specific reference to the measurements in Data Collection Procedures 2.0 (DCP 2.0). Four observers took a set of 99 measurements four times on a sample of 50 skeletons (each measurement was taken 200 times by each observer). Two-way mixed ANOVAs and repeated measures ANOVAs with pairwise comparisons were used to examine interobserver (between-subjects) and intraobserver (within-subjects) variability. Relative technical error of measurement (TEM) was calculated for measurements with significant ANOVA results to examine the error among a single observer repeating a measurement multiple times (e.g. repeatability or intraobserver error), as well as the variability between multiple observers (interobserver error). Two general trends emerged from these analyses: (1) maximum lengths and breadths have the lowest error across the board (TEM<0.5), and (2) maximum and minimum diameters at midshaft are more reliable than their positionally-dependent counterparts (i.e. sagittal, vertical, transverse, dorso-volar). Therefore, maxima and minima are specified for all midshaft measurements in DCP 2.0. Twenty-two measurements were flagged for excessive variability (either interobserver, intraobserver, or both); 15 of these measurements were part of the standard set of measurements in Data Collection Procedures for Forensic Skeletal Material, 3rd edition. Each measurement was examined carefully to determine the likely source of the error (e.g. data input, instrumentation, observer's method, or measurement definition). For several measurements (e.g. anterior sacral breadth, distal epiphyseal breadth of the tibia) only one observer differed significantly from the remaining observers, indicating a likely problem with the measurement definition as interpreted by that observer; these definitions were clarified in DCP 2.0 to eliminate this confusion. Other measurements were taken from landmarks that are difficult to locate consistently (e.g. pubis length, ischium length); these measurements were omitted from DCP 2.0. This manual is available for free download online (https://fac.utk.edu/wp-content/uploads/2016/03/DCP20_webversion.pdf), along with an accompanying instructional video (https://www.youtube.com/watch?v=BtkLFl3vim4). Copyright © 2018 Elsevier B.V. All rights reserved.

Teaching renewable energy using online PBL in investigating its effect on behaviour towards energy conservation among Malaysian students: ANOVA repeated measures approach

NASA Astrophysics Data System (ADS)

Nordin, Norfarah; Samsudin, Mohd Ali; Hadi Harun, Abdul

2017-01-01

This research aimed to investigate whether online problem based learning (PBL) approach to teach renewable energy topic improves students’ behaviour towards energy conservation. A renewable energy online problem based learning (REePBaL) instruction package was developed based on the theory of constructivism and adaptation of the online learning model. This study employed a single group quasi-experimental design to ascertain the changed in students’ behaviour towards energy conservation after underwent the intervention. The study involved 48 secondary school students in a Malaysian public school. ANOVA Repeated Measure technique was employed in order to compare scores of students’ behaviour towards energy conservation before and after the intervention. Based on the finding, students’ behaviour towards energy conservation improved after the intervention.

The Design and Development of a Context-Rich, Photo-Based Online Testing to Assess Students' Science Learning

ERIC Educational Resources Information Center

Lin, Min-Jin; Guo, Chorng-Jee; Hsu, Chia-Er

2011-01-01

This study designed and developed a CP-MCT (content-rich, photo-based multiple choice online test) to assess whether college students can apply the basic light concept to interpret daily light phenomena. One hundred college students volunteered to take the CP-MCT, and the results were statistically analyzed by applying t-test or ANOVA (Analysis of…

Sample Size and Statistical Conclusions from Tests of Fit to the Rasch Model According to the Rasch Unidimensional Measurement Model (Rumm) Program in Health Outcome Measurement.

PubMed

Hagell, Peter; Westergren, Albert

Sample size is a major factor in statistical null hypothesis testing, which is the basis for many approaches to testing Rasch model fit. Few sample size recommendations for testing fit to the Rasch model concern the Rasch Unidimensional Measurement Models (RUMM) software, which features chi-square and ANOVA/F-ratio based fit statistics, including Bonferroni and algebraic sample size adjustments. This paper explores the occurrence of Type I errors with RUMM fit statistics, and the effects of algebraic sample size adjustments. Data with simulated Rasch model fitting 25-item dichotomous scales and sample sizes ranging from N = 50 to N = 2500 were analysed with and without algebraically adjusted sample sizes. Results suggest the occurrence of Type I errors with N less then or equal to 500, and that Bonferroni correction as well as downward algebraic sample size adjustment are useful to avoid such errors, whereas upward adjustment of smaller samples falsely signal misfit. Our observations suggest that sample sizes around N = 250 to N = 500 may provide a good balance for the statistical interpretation of the RUMM fit statistics studied here with respect to Type I errors and under the assumption of Rasch model fit within the examined frame of reference (i.e., about 25 item parameters well targeted to the sample).

Laser and plasma dental soldering techniques applied to Ti-6Al-4V alloy: ultimate tensile strength and finite element analysis.

PubMed

Castro, Morgana G; Araújo, Cleudmar A; Menegaz, Gabriela L; Silva, João Paulo L; Nóbilo, Mauro Antônio A; Simamoto Júnior, Paulo Cézar

2015-05-01

The literature provides limited information regarding the performance of Ti-6Al-4V laser and plasma joints welded in prefabricated bars in dental applications. The purpose of this study was to evaluate the mechanical strength of different diameters of Ti-6Al-4V alloy welded with laser and plasma techniques. Forty-five dumbbell-shaped rods were created from Ti-6Al-4V and divided into 9 groups (n=5): a control group with 3-mm and intact bars; groups PL2.5, PL3, PL4, and PL5 (specimens with 2.5-, 3-, 4-, and 5-mm diameters welded with plasma); and groups L2.5, L3, L4, and L5 (specimens with 2.5-, 3-, 4-, and 5-mm diameters welded with laser). The specimens were tested for ultimate tensile strength (UTS), and elongation percentages (EP) were obtained. Fractured specimens were analyzed by stereomicroscopy, and welded area percentages (WAP) were calculated. Images were made with scanning electron microscopy. In the initial analysis, the data were analyzed with a 2-way ANOVA (2×4) and the Tukey Honestly Significant Difference (HSD) test. In the second analysis, the UTS and EP data were analyzed with 1-way ANOVA, and the Dunnett test was used to compare the 4 experimental groups with the control group (α=.05). The Pearson and Spearman correlation coefficient tests were applied to correlate the study factors. Finite element models were developed in a workbench environment with boundary conditions simulating those of a tensile test. The 2-way ANOVA showed that the factors welding type and diameter were significant for the UTS and WAP values. However, the interaction between them was not significant. The 1-way ANOVA showed statistically significant differences among the groups for UTS, WAP, and EP values. The Dunnett test showed that all the tested groups had lower UTS and EP values than the control group. The 2.5- and 3-mm diameter groups showed higher values for UTS and WAP than the other test groups. A positive correlation was found between welded area percentage and UTS and a negative correlation between these parameters and the diameters of the specimens. No statistically significant difference was found between the weld techniques. Under the experimental conditions described, diameters of 2.5 and 3 mm resulted in higher UTS and WAP for both laser and plasma welding and appear to be the best option for joining prefabricated rods in this kind of union. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Reliability and number of trials of Y Balance Test in adolescent athletes.

PubMed

Linek, Pawel; Sikora, Damian; Wolny, Tomasz; Saulicz, Edward

2017-10-01

The Star Excursion Balance Test (SEBT) is commonly used to evaluate dynamic equilibrium. The Y Balance Test (Y-BT) is a shortened version of the SEBT where a Y- Balance Kit is commonly used. To date, research concerning the protocol and reliability of the SEBT and Y-BT has been conducted only for adults. The aim of the study was to assess the protocol (the necessary number of trials to stabilize the results) and reliability of the Y-BT in adolescent athletes. One-way repeated-measures analysis of variance (ANOVA) and reliability study. The sample of 38 athletes (mean age: 15.6 years) was selected from a football club. A Y-Balance test kit was applied for the evaluation of dynamic balance. The analysis used the values normalized to the relative length of the lower limbs. After six attempts, three consecutive ones achieved stability for all directions and both extremities (p > 0.05). The intraclass correlation coefficient (ICC 3,1 ), standard error of measurement and minimal detectable change values for the three attempts ranged from 0.57 to 0.82, from 3 to less than 6% and from 7.68 to 13.7%, respectively. In the study of adolescent dynamic equilibrium using the Y-BT, it is recommended to perform nine attempts (including six trial attempts and three measurements). In order to increase reliability it is recommended that the average of the three measured attempts is analysed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Measurement of physical performance by field tests in programs of cardiac rehabilitation: a systematic review and meta-analysis.

PubMed

Travensolo, Cristiane; Goessler, Karla; Poton, Roberto; Pinto, Roberta Ramos; Polito, Marcos Doederlein

2018-04-13

The literature concerning the effects of cardiac rehabilitation (CR) on field tests results is inconsistent. To perform a systematic review with meta-analysis on field tests results after programs of CR. Studies published in PubMed and Web of Science databases until May 2016 were analyzed. The standard difference in means correct by bias (Hedges' g) was used as effect size (g) to measure que amount of modifications in performance of field tests after CR period. Potential differences between subgroups were analyzed by Q-test based on ANOVA. Fifteen studies published between 1996 e 2016 were included in the review, 932 patients and age ranged 54,4 - 75,3 years old. Fourteen studies used the six-minutes walking test to evaluate the exercise capacity and one study used the Shuttle Walk Test. The random Hedges's g was 0.617 (P<0.001), representing a drop of 20% in the performance of field test after CR. The meta-regression showed significantly association (P=0.01) to aerobic exercise duration, i.e., for each 1-min increase in aerobic exercise duration, there is a 0.02 increase in effect size for performance in the field test. Field tests can detect physical modification after CR, and the large duration of aerobic exercise during CR was associated with a better result. Copyright © 2018 Sociedade Portuguesa de Cardiologia. Publicado por Elsevier España, S.L.U. All rights reserved.

Changes in the cutting efficiency of different types of dental diamond rotary instrument with repeated cuts and disinfection.

PubMed

Bae, Jin-Hyuk; Yi, Jaeyoung; Kim, Sungtae; Shim, June-Sung; Lee, Keun-Woo

2014-01-01

Cutting efficiency is one of the most important factors to consider when a specific dental diamond rotary instrument is selected. However, the selection of a dental diamond rotary instrument is based on clinical experience rather than any scientific evidence. The purpose of this study was to identify how the cutting efficiency of different types of dental diamond rotary instrument changed with repeated cuts and disinfection. Four types of diamond rotary instrument from 2 dental manufacturers (Shofu, Jin Dental) were investigated with a high-speed air-turbine handpiece. The groups were as follows: S cham group (n=10): chamfer design from Shofu; J cham group (n=10): chamfer design from Jin Dental; S thin group (n=10): thin tapered design from Shofu; J thin group (n=10): thin tapered design from Jin Dental. Changes in the cutting efficiency of diamond rotary instruments on glass ceramic blocks were measured after repeated cuts. Changes in cutting efficiency also were measured for 30 diamond rotary instruments, the same type as those used in group J cham after disinfection with ethylene oxide gas, immersion in solution, or autoclaving. One-way ANOVA, 2-way ANOVA, and repeated-measures ANOVA were used to identify differences in cutting efficiency, in total cutting efficiency, and change trend in cutting efficiency (α=.05). The Tukey honestly significant difference method was used for the post hoc tests. The principal metal components of the diamond rotary instruments were detected with x-ray spectrometry. The mean (standard deviation [SD]) total cutting efficiency after 10 cuts in the 4 groups was in the following order: J cham group (0.210 ± 0.064 g/min) > S cham group (0.170 ± 0.064 g/min) > J thin group (0.130 ± 0.042 g/min) > S thin group (0.010 ± 0.040 g/min) (P<.05).The decrease in the cutting efficiency was greatest after the first cut. The cutting efficiency was not influenced by repeated disinfection. The cutting efficiencies of diamond rotary instruments with different designs and particle sizes showed a decreasing trend after repeated cuts but did not show any change after various disinfecting procedures. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Balanced bifrontal transcranial direct current stimulation enhances working memory in adults with high-functioning autism: a sham-controlled crossover study.

PubMed

van Steenburgh, J Jason; Varvaris, Mark; Schretlen, David J; Vannorsdall, Tracy D; Gordon, Barry

2017-01-01

Working memory (WM) often is impaired in autism spectrum disorder (ASD). Such impairment may underlie core deficits in cognition and social functioning. Transcranial direct current stimulation (tDCS) has been shown to enhance WM in both healthy adults and clinical populations, but its efficacy in ASD is unknown. We predicted that bifrontal tDCS would improve WM performances of adults with high-functioning autism during active stimulation compared to sham stimulation and that such enhancement would generalize to an untrained task. Twelve adults with high-functioning ASD engaged in a battery of WM tasks that included backward spatial span, backward digit span, spatial n -back and letter n -back. While engaged, 40 min of 1.5 mA bifrontal stimulation was applied over the left and the right dorsolateral prefrontal cortices (DLPFC). Using a single-blind crossover design, each participant received left anodal/right cathodal stimulation, right anodal/left cathodal stimulation, or sham stimulation, in randomized counterbalanced order on three separate days. Following tDCS, participants again engaged in letter and spatial n -back tasks before taking the Brief Test of Attention (BTA). We used repeated-measures ANOVA to compare overall performance on the WM battery as measured by a composite of z -scores for all five measures. Post hoc ANOVAs, t tests, Friedman's tests, and Wilcoxon signed-rank tests were used to measure the online and offline effects of tDCS and to assess performances on individual measures. Compared to sham stimulation, both left DLPFC anodal stimulation ( t 11  = 5.4, p  = 0.0002) and right DLPFC anodal stimulation ( t 11  = 3.57, p  = 0.004) improved overall WM performance. Left anodal stimulation ( t 11  = 3.9, p  = 0.003) and right anodal stimulation ( t 11  = 2.7, p  = 0.019) enhanced performances during stimulation. Enhancement transferred to an untrained task 50 min after right anodal stimulation (z 11  = 2.263, p  = 0.024). The tasks that showed the largest effects of active stimulation were spatial span backward ( z 11  = 2.39, p  = 0.017) and BTA ( z 11  = 2.263, p  = 0.024). In adults with high-functioning ASD, active bifrontal tDCS given during WM tasks appears to improve performance. TDCS benefits also transferred to an untrained task completed shortly after stimulation. These results suggest that tDCS can improve WM task performance and could reduce some core deficits of autism. NCT01602263.

Cycling induced by electrical stimulation improves motor recovery in postacute hemiparetic patients: a randomized controlled trial.

PubMed

Ambrosini, Emilia; Ferrante, Simona; Pedrocchi, Alessandra; Ferrigno, Giancarlo; Molteni, Franco

2011-04-01

This study assessed whether cycling induced by functional electrical stimulation (FES) was more effective than passive cycling with placebo stimulation in promoting motor recovery and walking ability in postacute hemiparetic patients. In a double-blind, randomized, controlled trial, 35 patients were included and randomized to receive FES-induced cycling training or placebo FES cycling. The 4-week treatment consisted of 20 sessions lasting 25 minutes each. Primary outcome measures included the leg subscale of the Motricity Index and gait speed during a 50-meter walking test. Secondary outcomes were the Trunk Control Test, the Upright Motor Control Test, the mean work produced by the paretic leg, and the unbalance in mechanical work between paretic and nonparetic legs during voluntary pedaling. Participants were evaluated before training, after training, and at 3- to 5-month follow-up visits. No significant differences were found between groups at baseline. Repeated-measures ANOVA (P<0.05) revealed significant increases in Motricity Index, Trunk Control Test, Upright Motor Control Test, gait speed, and mean work of the paretic leg after training and at follow-up assessments for FES-treated patients. No outcome measures demonstrated significant improvements after training in the placebo group. Both groups showed no significant differences between assessments after training and at follow-up. A main effect favoring FES-treated patients was demonstrated by repeated-measures ANCOVA for Motricity Index (P<0.001), Trunk Control Test (P=0.001), Upright Motor Control Test (P=0.005), and pedaling unbalance (P=0.038). The study demonstrated that 20 sessions of FES cycling training significantly improved lower extremity motor functions and accelerated the recovery of overground locomotion in postacute hemiparetic patients. Improvements were maintained at follow-up.

Color Stability of Composites After Short-term Oral Simulation: An in vitro Study

PubMed Central

Özdaş, Didem Öner; Kazak, Mağrur; Çilingir, Aylin; Subaşı, Meryem Gülce; Tiryaki, Murat; Günal, Şölen

2016-01-01

Background: Although most of the studies investigated color stability of different restorative materials, evaluation of color stability of composites after immersion in multiple beverages in the same day by an in vitro oral simulation study is unclear. Objective: To assess color change of different restorative materials at the end of days 1, 14, and 30 of immersion in multiple liquid types to mimic the oral environment in vitro. Method: Ten disc-shaped specimens were made from each of four different resin composites (Filtek Z250, Voco x-tra base, Beautifil Flow Plus, Beautifil II). Baseline color value of each sample was measured using a spectrophotometer. Each composite was respectively immersed in coffee, an orange/pomegranate juice mixture, black tea, and a mouth rinse on the same day to mimic daily liquid consumption of individuals. Color measurements were taken after 1, 14, and 30 days by spectrophotometer and color change values were calculated. Statistical analyses were executed by one-way ANOVA/Tukey HSD and repeated-measures ANOVA. Results: All materials showed significant color change after 1, 14, and 30 days (P < 0.01) of immersion in liquids, with the lowest color alteration observed at the 1st day and the highest observed after the 30th day. Among the materials tested, at each time point (1, 14, and 30 days), the lowest color alteration was detected in Filtek Z250 and the highest color alteration was detected in Beautifil II. Conclusion: Color alteration of composite resins is affected by composite type and storage time. With the exception of 1 day of storage, color changes of all materials were substantial and clinically unacceptable. PMID:27733871

The Accuracy of Four Impression-making Techniques in Angulated Implants Based on Vertical Gap

PubMed Central

Saboury, Abolfazl; Neshandar Asli, Hamid; Dalili Kajan, Zahra

2017-01-01

Statement of the Problem: Precision of the impression taken from implant positions significantly determines accurate fit of implant-supported prostheses. An imprecise impression may produce prosthesis misfit. Purpose: This study aimed to evaluate the accuracy of four impression-making techniques for angulated implants by stereomicroscope through measuring the vertical marginal gaps between the cemented metal framework and the implant analog. Materials and Method: A definitive cast with two 15° mesially angulated implants served as the standard reference for making all the impressions and later for accuracy evaluation. Four groups of five samples were evaluated: (1) closed-tray snap-fit transfer, (2) open-tray nonsplinted impression coping, (3) metal splinted impression coping, and (4) fabricated acrylic resin transfer cap. A gold-palladium framework was fabricated over the angulated implant abutments, the fit of which was used as reference. The gaps between the metal framework and the implant analogs were measured in sample groups. Corresponding means for each technique and the definitive cast were compared by using ANOVA and post hoc tests. Results: The mean marginal gap was 38.16±0µm in definitive cast, 89±19.74µm in group 1, 78.66±20.63µm in group 2, 54.16±24.29µm in group 3, and 55.83±18.30µm in group 4. ANOVA revealed significant differences between the definitive cast and groups 1 and 2, but not with groups 3 and 4 (p< 0.05). Conclusion: Vertical gap measurements showed that metal splinted impression coping and fabricated acrylic resin transfer cap techniques produced quite more accurate impressions than closed-tray snap-fit transfer and open-tray nonsplinted impression coping techniques do. The fabricated acrylic resin transfer cap technique seems to be a reliable impression-making method. PMID:29201973

Computer-aided liver volumetry: performance of a fully-automated, prototype post-processing solution for whole-organ and lobar segmentation based on MDCT imaging.

PubMed

Fananapazir, Ghaneh; Bashir, Mustafa R; Marin, Daniele; Boll, Daniel T

2015-06-01

To evaluate the performance of a prototype, fully-automated post-processing solution for whole-liver and lobar segmentation based on MDCT datasets. A polymer liver phantom was used to assess accuracy of post-processing applications comparing phantom volumes determined via Archimedes' principle with MDCT segmented datasets. For the IRB-approved, HIPAA-compliant study, 25 patients were enrolled. Volumetry performance compared the manual approach with the automated prototype, assessing intraobserver variability, and interclass correlation for whole-organ and lobar segmentation using ANOVA comparison. Fidelity of segmentation was evaluated qualitatively. Phantom volume was 1581.0 ± 44.7 mL, manually segmented datasets estimated 1628.0 ± 47.8 mL, representing a mean overestimation of 3.0%, automatically segmented datasets estimated 1601.9 ± 0 mL, representing a mean overestimation of 1.3%. Whole-liver and segmental volumetry demonstrated no significant intraobserver variability for neither manual nor automated measurements. For whole-liver volumetry, automated measurement repetitions resulted in identical values; reproducible whole-organ volumetry was also achieved with manual segmentation, p(ANOVA) 0.98. For lobar volumetry, automated segmentation improved reproducibility over manual approach, without significant measurement differences for either methodology, p(ANOVA) 0.95-0.99. Whole-organ and lobar segmentation results from manual and automated segmentation showed no significant differences, p(ANOVA) 0.96-1.00. Assessment of segmentation fidelity found that segments I-IV/VI showed greater segmentation inaccuracies compared to the remaining right hepatic lobe segments. Automated whole-liver segmentation showed non-inferiority of fully-automated whole-liver segmentation compared to manual approaches with improved reproducibility and post-processing duration; automated dual-seed lobar segmentation showed slight tendencies for underestimating the right hepatic lobe volume and greater variability in edge detection for the left hepatic lobe compared to manual segmentation.

One-way ANOVA based on interval information

NASA Astrophysics Data System (ADS)

Hesamian, Gholamreza

2016-08-01

This paper deals with extending the one-way analysis of variance (ANOVA) to the case where the observed data are represented by closed intervals rather than real numbers. In this approach, first a notion of interval random variable is introduced. Especially, a normal distribution with interval parameters is introduced to investigate hypotheses about the equality of interval means or test the homogeneity of interval variances assumption. Moreover, the least significant difference (LSD method) for investigating multiple comparison of interval means is developed when the null hypothesis about the equality of means is rejected. Then, at a given interval significance level, an index is applied to compare the interval test statistic and the related interval critical value as a criterion to accept or reject the null interval hypothesis of interest. Finally, the method of decision-making leads to some degrees to accept or reject the interval hypotheses. An applied example will be used to show the performance of this method.

Intraindividual Variability in Test-Retest Air Displacement Plethysmography Measurements of Body Density for Men and Women.

PubMed

Gibson, Ann L; Roper, Jenevieve L; Mermier, Christine M

2016-10-01

Air displacement plethysmography (ADP) is a popular method for estimating body density (Db). Most ADP tests are performed once, with test-retest investigations scarce. Therefore, we investigated test-retest reliability of ADP. Active men (n = 25) and women (n = 25) volunteered and followed standard pretest guidelines. Participants wore dry, form-fitting swimwear and manufacturer-supplied swim caps. In a single session, two ADP trials with measured thoracic gas volume (TGV) were performed without repositioning participants. Separate 2 (sex) × 2 (ADP trial) repeated-measures ANOVAs were performed to investigate within-between comparisons of Db, TGV, body volume (Vb), and relative fatness (%BF). Paired t tests were used to investigate significant differences as appropriate. The Bland and Altman technique was used to depict individual intertrial variations. For all analyses, α =.05. A significant main effect for sex was found; men were lower in %BF and higher in all other variables compared with women. Individual variability was notable (ADP1-ADP2). The range of individual intertrial differences were larger for women than men, respectively, for Db (-0.0096-0.0045 g/cc; -0.0019-0.0054 g/cc), TGV (-0.623-1.325 L; -0.584-0.378 L), Vb (-0.249-2.10 L; -0.234-0.397 L), and %BF (-2.1-4.4%; -0.2-0.9%). When assessing body composition of women via ADP or using Db from ADP in a multicomponent model, at least two trials with measured TGV should be performed and the average of the values recorded and reported.

University Faculty and Work-Related Well-Being: The Importance of the Triple Work Profile

ERIC Educational Resources Information Center

Vera, Maria; Salanova, Marisa; Martin, Beatriz

2010-01-01

Introduction: The main aim of this study is to test whether different university faculty work profiles (i.e., teaching, research and management) relate with the experience of well-being at work (i.e., burnout, work engagement and intrinsic satisfaction). Method: Hypotheses were tested through a K-means cluster, ANOVA, and confirmatory factor…

Analysis of Turkish Prospective Science Teachers' Perceptions on Technology in Education

ERIC Educational Resources Information Center

Koksal, Mustafa Serdar; Yaman, Suleyman; Saka, Yavuz

2016-01-01

Purpose of this study was to determine and analyze Turkish pre-service science teachers' perceptions on technology in terms of learning style, computer competency level, possession of a computer, and gender. The study involved 264 Turkish pre-service science teachers. Analyses were conducted through four-way ANOVA, t-tests, Mann Whitney U test and…

Impact of laboratory treatment with coloring and fluorescent liquids on the optical properties of zirconia before and after accelerated aging.

PubMed

Rafael, Caroline Freitas; Cesar, Paulo Francisco; Fredel, Marcio; Magini, Ricardo de Souza; Liebermann, Anja; Maziero Volpato, Cláudia Angela

2018-03-15

Laboratory procedures, such as dipping in coloring and fluorescent liquids, can be used to improve the optical properties of zirconia. However, information is lacking on the effect of these liquids. The purpose of this in vitro study was to evaluate the color differences and degree of fluorescence of zirconia (3Y-TZP) treated with coloring and fluorescent liquids before and after an accelerated aging protocol. Forty disk-shaped specimens of 3Y-TZP were fabricated by milling and separated according to the laboratory treatment performed: white zirconia (control group); zirconia treated with coloring liquid (A2 group); zirconia treated with fluorescent liquid (fluorescent group); and zirconia treated with both liquids (A2 fluorescent group). The L*a*b* coordinates before aging (T 0 ) were obtained with a spectrophotometer, and the degree of fluorescence was measured. The disks were subjected to accelerated aging for 1 hour (T 1 ) and 5 hours (T 2 ). Measurements were made before and after each time interval. Color differences (ΔE 00 ) were calculated using the CIEDE2000 formula and analyzed by 2-way ANOVA. Lightness (ΔL'), chroma (ΔC'), and hue differences (ΔH') were analyzed by multivariate ANOVA. Degrees of fluorescence were obtained as percentages and were analyzed by 2-way ANOVA. Multiple comparisons were performed by the Tukey HSD test (α=.05). Color differences were observed when 3Y-TZP disks were treated with coloring (7.91 ΔE 00 ), with fluorescent liquid (5.81 ΔE 00 ), and with both liquids (5.52 ΔE 00 ). Accelerated aging resulted in color differences in the T 2 A2 group (6.74 ΔE 00 ) and at both times evaluated in the fluorescent group (T 1 =8.59 ΔE 00 and T 2 =8.47 ΔE 00 ) (P<.001). In the A2 fluorescent group, the degree of fluorescence was not influenced significantly (P>.05). The use of fluorescent liquid influenced the degree of fluorescence in the fluorescent group (T 0 =20%). Significant differences in color, lightness, chroma, and hue were achieved in all tested groups before and after aging. The degree of fluorescence was statistically different only in the fluorescent group and was not influenced by accelerated aging. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Comparison of immediate complete denture, tooth and implant-supported overdenture on vertical dimension and muscle activity

PubMed Central

Shah, Farhan Khalid; Gebreel, Ashraf; Elshokouki, Ali hamed; Habib, Ahmed Ali

2012-01-01

PURPOSE To compare the changes in the occlusal vertical dimension, activity of masseter muscles and biting force after insertion of immediate denture constructed with conventional, tooth-supported and Implant-supported immediate mandibular complete denture. MATERIALS AND METHODS Patients were selected and treatment was carried out with all the three different concepts i.e, immediate denture constructed with conventional (Group A), tooth-supported (Group B) and Implant-supported (Group C) immediate mandibular complete dentures. Parameters of evaluation and comparison were occlusal vertical dimension measured by radiograph (at three different time intervals), Masseter muscle electromyographic (EMG) measurement by EMG analysis (at three different positions of jaws) and bite force measured by force transducer (at two different time intervals). The obtained data were statistically analyzed by using ANOVA-F test at 5% level of significance. If the F test was significant, Least Significant Difference test was performed to test further significant differences between variables. RESULTS Comparison between mean differences in occlusal vertical dimension for tested groups showed that it was only statistically significant at 1 year after immediate dentures insertion. Comparison between mean differences in wavelet packet coefficients of the electromyographic signals of masseter muscles for tested groups was not significant at rest position, but significant at initial contact position and maximum voluntary clench position. Comparison between mean differences in maximum biting force for tested groups was not statistically significant at 5% level of significance. CONCLUSION Immediate complete overdentures whether tooth or implant supported prosthesis is recommended than totally mucosal supported prosthesis. PMID:22737309

Gloss and surface roughness produced by polishing kits on resin composites.

PubMed

Sadidzadeh, Ramtin; Cakir, Deniz; Ramp, Lance C; Burgess, John O

2010-08-01

To compare in vitro the surface roughness (Ra) and gloss (G) produced by three conventional and one experimental polishing kits on four resin composites. 24 discs were prepared (d = 12 mm, t = 4 mm) for each resin composite: Filtek Supreme Plus Body/A2 (FSB), Yellow Translucent (FST), Heliomolar/A2 (HM), and EsthetX/A2 (EX) following the manufacturers' instructions. They were finished with 320 grit silicon carbide paper for 80 seconds each. Polishing systems: Sof-Lex, Enhance-Pogo, Astropol and Experimental Discs/EXL-695, were applied following manufacturers' instructions. Each specimen was ultrasonically cleaned with distilled water and dried. Gloss and Ra were measured with a small area glossmeter (Novo-curve) and non-contact profilometer (Proscan 2000) following ISO 4288, respectively. The results were evaluated by two-way ANOVA followed by separate one-way ANOVA and Tukey/Kramer test (P = 0.05). There was a significant interaction of surface roughness and gloss between the composites and polishing systems (P < 0.05). The lowest surface roughness was recorded for FST polished with the Experimental kit. The highest gloss was obtained for FSB composite polished with the Experimental kit. The experimental polishing system produced smoothest surfaces (P < 0.05). The Enhance-Pogo and the experimental polishing kit produced highest gloss (P < 0.05).

Effect of Consuming Tea with Stevia on Salivary pH - An In Vivo Randomised Controlled Trial.

PubMed

Pallepati, Akhil; Yavagal, Puja; Veeresh, D J

To assess the effect of consuming tea with stevia on salivary pH. This randomised controlled trial employed a Latin square design. Twenty-four male students aged 20-23 years were randomly allocated to 4 different groups, 3 experimental with tea sweetened by sucrose, jaggery or stevia, and one unsweetened control. Salivary pH assessments were performed at baseline and 1 min, 20 and 60 min after consumption of the respective tea. One-way ANOVA and repeated measures ANOVA followed by Tukey's post-hoc tests were employed to analyse the data. One minute after tea consumption, the salivary pH of the sucrose group significantly decreased compared to the stevia group (p = 0.01). There was a significant difference between baseline mean salivary pH and post-interventional mean salivary pH values at all time intervals in the tea + sucrose, tea + jaggery, and plain tea groups (p < 0.01). One hour after consumption of tea, the salivary pH values reached the baseline pH in stevia and plain tea groups, but it remained lower in the sucrose and jaggery groups. The results of the present study, in which the salivary pH values returned to baseline pH 1 h after drinking stevia-sweetened tea, suggest stevia's potential as a non-cariogenic sweetener.

Alternative methods for determining shrinkage in restorative resin composites.

PubMed

de Melo Monteiro, Gabriela Queiroz; Montes, Marcos Antonio Japiassú Resende; Rolim, Tiago Vieira; de Oliveira Mota, Cláudia Cristina Brainer; de Barros Correia Kyotoku, Bernardo; Gomes, Anderson Stevens Leônidas; de Freitas, Anderson Zanardi

2011-08-01

The purpose of this study was to evaluate polymerization shrinkage of resin composites using a coordinate measuring machine, optical coherence tomography and a more widely known method, such as Archimedes Principle. Two null hypothesis were tested: (1) there are no differences between the materials tested; (2) there are no differences between the methods used for polymerization shrinkage measurements. Polymerization shrinkage of seven resin-based dental composites (Filtek Z250™, Filtek Z350™, Filtek P90™/3M ESPE, Esthet-X™, TPH Spectrum™/Dentsply 4 Seasons™, Tetric Ceram™/Ivoclar-Vivadent) was measured. For coordinate measuring machine measurements, composites were applied to a cylindrical Teflon mold (7 mm × 2 mm), polymerized and removed from the mold. The difference between the volume of the mold and the volume of the specimen was calculated as a percentage. Optical coherence tomography was also used for linear shrinkage evaluations. The thickness of the specimens was measured before and after photoactivation. Polymerization shrinkage was also measured using Archimedes Principle of buoyancy (n=5). Statistical analysis of the data was performed with ANOVA and the Games-Howell test. The results show that polymerization shrinkage values vary with the method used. Despite numerical differences the ranking of the resins was very similar with Filtek P90 presenting the lowest shrinkage values. Because of the variations in the results, reported values could only be used to compare materials within the same method. However, it is possible rank composites for polymerization shrinkage and to relate these data from different test methods. Independently of the method used, reduced polymerization shrinkage was found for silorane resin-based composite. Copyright © 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Comparative study of the fluorescence intensity of dental composites and human teeth submitted to artificial aging.

PubMed

Jablonski, Tatiana; Takahashi, Marcos Kenzo; Brum, Rafeal Torres; Rached, Rodrigo Nunes; Souza, Evelise M

2014-01-01

The aim of this study was to evaluate quantitatively the fluorescence of resin composites and human teeth, and to determine the stability of fluorescence after aging. Ten specimens were built using a 1 mm thick increment of dentin composite overlapped by a 0.5 mm thick increment of enamel composite. Ten sound human molars were sectioned and silicon carbide-polished to obtain enamel and dentin slabs 1.5 mm in thickness. Fluorescence measurements were carried out by a fluorescence spectrophotometer before and after thermocycling (2000 cycles, 5°C and 55°C). One-way analysis of variance (ANOVA) with repeated measures and Tukey's test were performed at a significance level of 5%. Most of the tested composites showed significant differences in fluorescence both before and after aging (P < 0.05). Opallis was the only composite whose fluorescence was similar to that of human teeth at both periods of evaluation (P > 0.05), and was the only composite that showed comparable results of fluorescence to the tooth structure before and after thermocycling. With the exception of Filtek Supreme, there were significant reductions in fluorescence intensity for all the tested composites (P < 0.05).

The effectiveness of a supportive educative group intervention on family caregiver burden of patients with heart failure.

PubMed

Etemadifar, Shahram; Bahrami, Masoud; Shahriari, Mohsen; Farsani, Alireza Khosravi

2014-05-01

Living with heart failure patients is a complex situation for family caregivers. Few studies have been conducted to examine the effects of interventional programs to ease this condition. The purpose of this study was to determine the effectiveness of a supportive educative group intervention in reducing family caregivers' burden of caregiving. This randomized clinical trail was conducted at a selective teaching hospital in Isfahan, Iran in 2012. The intervention consisted of four weekly multimedia training sessions of 2 h that included education and family support for 50 family caregivers. Caregiver burden was measured using the Zarit Burden Interview (ZBI). Paired t-test, Student's t-tests, and repeated measures analysis of variance (ANOVA) were used to test for significant differences of the mean scores of burden between the intervention and control groups over a 3-month period. The intervention was successful in reducing caregiver burden over time both at the end of the intervention period (P = 0.000) and 3 months after the intervention (P = 0.000). Nurses and other healthcare providers can use the findings of this study in order to implement effective programs to reduce family caregivers' challenges and to provide them more support.

Effect of kinesthetic illusion induced by visual stimulation on muscular output function after short-term immobilization.

PubMed

Inada, Toru; Kaneko, Fuminari; Hayami, Tatsuya

2016-04-01

Kinesthetic illusions by visual stimulation (KiNVIS) enhances corticomotor excitability and activates motor association areas. The purpose of this study was to investigate the effect of KiNVIS induction on muscular output function after short-term immobilization. Thirty subjects were assigned to 3 groups: an immobilization group, with the left hand immobilized for 12h (immobilization period); an illusion group, with the left hand immobilized and additionally subjected to KiNVIS of the immobilized part during the immobilization period; and a control group with no manipulation. The maximum voluntary contraction (MVC), fluctuation of force (force fluctuation) during a force modulation task, and twitch force were measured both before (pre-test) and after (post-test) the immobilization period. Data were analyzed by performing two-way (TIME×GROUP) repeated measures ANOVA. The MVC decreased in the immobilization group only (pre-test; 37.8±6.1N, post-test; 32.8±6.9N, p<0.0005) after the immobilization period. The force fluctuation increased only in the immobilization group (pre-test; 2.19±0.54%, post-test; 2.78±0.87%, p=0.007) after the immobilization period. These results demonstrate that induction of KiNVIS prevents negative effect on MVC and force fluctuation after 12h of immobilization. Copyright © 2016 Elsevier Ltd. All rights reserved.

The effect of plyometric training on power and kicking distance in female adolescent soccer players.

PubMed

Rubley, Mack D; Haase, Amaris C; Holcomb, William R; Girouard, Tedd J; Tandy, Richard D

2011-01-01

The purpose of this study was to measure the effects of low-frequency, low-impact plyometric training on vertical jump (VJ) and kicking distance in female adolescent soccer players. Sixteen adolescent soccer players were studied (age 13.4 ± 0.5 years) across 14 weeks. The control group (general soccer training only) had 6 subjects, and the plyometric training (general soccer training plus plyometric exercise) group had 10 subjects. All subjects were tested for VJ and kicking distance on 3 occasions: pre-test, 7 weeks, and 14 weeks. Data were analyzed using a 2 (Training) × 3 (Test) analysis of variance (ANOVA) with repeated measures on the factor test. No significant difference in kicking distance was found between groups at pre-test (p = 0.688) or 7 weeks (p = 0.117). The plyometric group had significantly greater kicking distance after 14 weeks (p < 0.001). No significant difference in VJ height was found between groups at pre-test (p = 0.837) or 7 weeks (p = 0.108). The plyometric group had a significantly higher VJ after 14 weeks (p = 0.014). These results provide strength coaches with a safe and effective alternative to high-intensity plyometric training. Based on these findings, to increase lower-body power resulting in increased VJ and kicking distance, strength coaches should implement once-weekly, low-impact plyometric training programs with their adolescent athletes.

Effect of Storage Period on Dimensional Stability of Alginplus and Hydrogum 5

PubMed Central

Aalaei, Shima; Ganj-Khanloo, Rohollah

2017-01-01

Objectives: This study aimed to evaluate the effect of storage period on dimensional stability of Alginplus and Hydrogum 5. Materials and Methods: In this in vitro experimental study, 60 impressions were taken of an upper jaw typodont, including 10 impressions for each storage period to be tested (12 minutes, 24 and 120 hours) for each type of alginate. Then, the impressions were stored in an incubator with stable temperature and humidity, and poured using a type III dental stone. Subsequently, the mesiodistal dimension, occlusogingival height, and interarch distance were measured using a digital caliper with an accuracy of 0.01mm. The data were analyzed using ANOVA and t-test (P<0.05). Results: Alginplus and Hydrogum 5 impressions were not significantly different from the master model after 12 minutes and 24 hours in terms of dimensions (P>0.05). After 120 hours, all dimensions measured on casts were significantly different from those measured on the master model, except for the mesiodistal dimension of the Hydrogum 5 impressions. Conclusions: At a consistent temperature and humidity, the Alginplus and Hydrogum 5 impressions were dimensionally stable for at least 24 hours. PMID:28828015

Pilot study for evidence-based nursing management: improving the levels of job satisfaction, organizational commitment, and intent to leave among nurses in Turkey.

PubMed

Arslan Yurumezoglu, Havva; Kocaman, Gulseren

2012-06-01

Because of the nursing shortage problem, an important goal for nurse managers is preventing nurses from leaving the organization. This study analyzed the effect of evidence-based nursing management practices on nurses' levels of job satisfaction, organizational commitment, and intent to leave using the Promoting Action Research Implementation in Health Service framework as a guide. This study employed a single-group, quasi-experimental, pretest-post-test design with repeated measures. Data were collected using the Minnesota Job Satisfaction Questionnaire and the Organizational Commitment Scale. The study was conducted at a 127-bed private, accredited hospital. The sample was composed of 58 nurses who participated in all three measurements. Data analysis was conducted using repeated-measures anova and the Cochrane Q-test. An improvement was observed in the nurses' intrinsic, extrinsic, and total satisfaction levels, and in the degree of normative commitment. Nurse managers stated that they benefited from this study. In order to find effective and long-lasting solutions to the nursing shortage problem, evidence-based recommendations should be used in nursing management. © 2012 Blackwell Publishing Asia Pty Ltd.

Visuoconstructional Impairment in Subtypes of Mild Cognitive Impairment

PubMed Central

Ahmed, Samrah; Brennan, Laura; Eppig, Joel; Price, Catherine C.; Lamar, Melissa; Delano-Wood, Lisa; Bangen, Katherine J.; Edmonds, Emily C.; Clark, Lindsey; Nation, Daniel A.; Jak, Amy; Au, Rhoda; Swenson, Rodney; Bondi, Mark W.; Libon, David J.

2018-01-01

Clock Drawing Test performance was examined alongside other neuropsychological tests in mild cognitive impairment (MCI). We tested the hypothesis that clock-drawing errors are related to executive impairment. The current research examined 86 patients with MCI for whom, in prior research, cluster analysis was used to sort patients into dysexecutive (dMCI, n=22), amnestic (aMCI, n=13), and multi-domain (mMCI, n=51) subtypes. First, principal components analysis (PCA) and linear regression examined relations between clock-drawing errors and neuropsychological test performance independent of MCI subtype. Second, between-group differences were assessed with analysis of variance (ANOVA) where MCI subgroups were compared to normal controls (NC). PCA yielded a 3-group solution. Contrary to expectations, clock-drawing errors loaded with lower performance on naming/lexical retrieval, rather than with executive tests. Regression analyses found increasing clock-drawing errors to command were associated with worse performance only on naming/lexical retrieval tests. ANOVAs revealed no differences in clock-drawing errors between dMCI versus mMCI or aMCI versus NCs. Both the dMCI and mMCI groups generated more clock-drawing errors than the aMCI and NC groups in the command condition. In MCI, language-related skills contribute to clock-drawing impairment. PMID:26397732

Protocol of a randomized controlled trial of sun protection interventions for operating engineers.

PubMed

Duffy, Sonia A; Ronis, David L; Waltje, Andrea H; Choi, Seung Hee

2013-03-26

Skin cancer are increasing and some types of skin cancer are among the most lethal cancers yet are easily preventable. However, sun protection interventions are rarely implemented among outdoor workers. Our prior work shows that Michigan Operating Engineers (heavy equipment operators) spend an average of 4-5 hours in the sun, about one-third reported getting sun burned at least once a summer, and over half burned more than once a summer. About three-quarters of the sample never or only sometimes used sun block. Using the Health Belief Model as a guide, this randomized controlled trial (RCT) will test the efficacy of four sun protection interventions targeting Operating Engineers: a) education only; b) education and mailed sunscreen; c) education and text message reminders; and, d) education, mailed sunscreen, and text message reminders. Participations in the study will be offered during regularly scheduled safety trainings at the Local 324 Training Center. Pre- and post-intervention surveys will be collected to determine changes in sunscreen use and sun burning, the primary dependent variables. The analyses will include: a) paired t-tests to determine changes over time (from pre-intervention to post-intervention) in outcome variables (sunscreen use and burning) separately in the 4 intervention groups, b) Repeated Measures Analysis of Variance (RM-ANOVA) to compare the changes in outcomes across the 4 groups, and c) t-tests on change scores as follow-ups to the RM-ANOVA to determine exactly which groups differ from each other. Based on the outcome of this study, we will develop a RO1 for wider scale testing and dissemination in conjunction with the International Training Center which services North America (including the US, Mexico, and Canada). Wide scale dissemination of an efficacious sun protection intervention has the potential to substantially impact skin cancer rates among this population. The ultimate goal is for high reach, high efficacy, and low cost. NCT01804595.

Collaborative group work: effects of group size and assignment structure on learning gain, student satisfaction and perceived participation.

PubMed

Kooloos, Jan G M; Klaassen, Tim; Vereijken, Mayke; Van Kuppeveld, Sascha; Bolhuis, Sanneke; Vorstenbosch, Marc

2011-01-01

Collaborative group sessions in Nijmegen include 15 students who work all together on a group assignment. Sometimes, the group is split-up in three and every subgroup elaborates a part of the assignment. At the end, they peer-teach each other. It is believed that the split-up enhances participation and therefore learning gain. To establish the effect of group size and structure of the assignment on the perceived participation, the satisfaction and learning gain of collaborative group sessions. In this study, 27 groups of 15 students were equally divided into: A-group: all 15 students working on the complete assignment. B-group: subgroups of 5 students working on the complete assignment. C-group: subgroups of 5 students working on a smaller part, and peer-teaching each other at the end of the group session. All students took a pre-test, a post-test and a follow-up test and completed a questionnaire. Questionnaires were analyzed with a one-way analysis of variance (ANOVA) and post hoc by multiple comparisons. Learning gain was analyzed using a repeated measures ANOVA. A group size effect is observed in favor of working in subgroups. Perceived participation of the students differs between A and B (p ≤ 0.001) and between A and C (p ≤ 0.001), but not between B and C. Also, an assignment effect is found in favor of the smaller assignment combined with peer-teaching. The students' satisfaction differs between A and C (p ≤ 0.003) and between B and C (p ≤ 0.001), but not between A and B. The C-group also shows higher test results (p ≤ 0.043). The students prefer smaller groups as well as smaller assignments including peer-teaching. A possible larger learning gain of this format needs to be re-investigated.

Protocol of a randomized controlled trial of sun protection interventions for operating engineers

PubMed Central

2013-01-01

Background Skin cancer are increasing and some types of skin cancer are among the most lethal cancers yet are easily preventable. However, sun protection interventions are rarely implemented among outdoor workers. Our prior work shows that Michigan Operating Engineers (heavy equipment operators) spend an average of 4–5 hours in the sun, about one-third reported getting sun burned at least once a summer, and over half burned more than once a summer. About three-quarters of the sample never or only sometimes used sun block. Methods/design Using the Health Belief Model as a guide, this randomized controlled trial (RCT) will test the efficacy of four sun protection interventions targeting Operating Engineers: a) education only; b) education and mailed sunscreen; c) education and text message reminders; and, d) education, mailed sunscreen, and text message reminders. Participations in the study will be offered during regularly scheduled safety trainings at the Local 324 Training Center. Pre- and post-intervention surveys will be collected to determine changes in sunscreen use and sun burning, the primary dependent variables. The analyses will include: a) paired t-tests to determine changes over time (from pre-intervention to post–intervention) in outcome variables (sunscreen use and burning) separately in the 4 intervention groups, b) Repeated Measures Analysis of Variance (RM-ANOVA) to compare the changes in outcomes across the 4 groups, and c) t-tests on change scores as follow-ups to the RM-ANOVA to determine exactly which groups differ from each other. Discussion Based on the outcome of this study, we will develop a RO1 for wider scale testing and dissemination in conjunction with the International Training Center which services North America (including the US, Mexico, and Canada). Wide scale dissemination of an efficacious sun protection intervention has the potential to substantially impact skin cancer rates among this population. The ultimate goal is for high reach, high efficacy, and low cost. Trial registration NCT01804595 PMID:23530608

Effect of hydrofluoric acid surface treatments on micro-shear bond strength of CAD/CAM ceramics

PubMed Central

Mokhtarpour, Faraneh; Alaghehmand, Homayoon; Khafri, Soraya

2017-01-01

Introduction Dental ceramics are appreciated as highly esthetic restorative materials that can simulate the appearance of natural dentition better than other materials. The aim of this study was to evaluate the effect of hydrofluoric acid concentration and etching time on micro-shear bond strength (μSBS) to IPS e.max CAD and Vita Mark II of a dual cured resin cement (Panavia F2.0). Methods This study was an experimental in vitro study, performed in the dental material research center of Babol University of Medical Sciences in 2016. Two hydrofluoric acid concentrations (5% and 10%) and three different etching times (20, 60 and 120 seconds) were used to etch the specimens respectively. A silane coupling agent (Clearfil porcelain activator) and priming and bonding agent (Clearfil SE bond) were used on the etched surfaces in accordance to the manufacturer’s instructions of use. Then resin cement was applied on the prepared ceramic surfaces and light cured. μSBS between resin cement and the porcelains were measured with a universal testing machine. Mode of failure was observed with 40× magnification by means of a Stereo microscope. Data were analyzed with ANOVA and independent-samples t-test and Chi-square tests. Results In both e.max and Vita Mark II groups, μSBS were not significantly different when different etching times (one-way ANOVA) and HF acid concentrations (Independent-samples t-test) were used (p>0.05), but the highest μSBS was shown in e.max specimens etched 60 s with 5% HF and Vita Mark II specimens etched 20 s with 10% HF. μSBS of e.max was significantly higher than Vita Mark II (p=0.00). Conclusion Best surface treatment for e.max and Vita Mark II ceramics is 20 s etch using 5 % hydrofluoric acid. PMID:29238488

The Value of Training: Analysis of DAU’s Requirements Management Training Results

DTIC Science & Technology

2015-04-01

test outcomes. According to Kim and Wilson (2010), “there can be substantial effects of pretest on posttest , especially when the duration between them...determine whether one group might be better prepared for the advanced concepts course. The DAU faculty compares pre-test data to post-test data to...this assumption, however. The means of the group scores on the pre-test varied only between 49.5 and 53.7. An ANOVA test on the groups revealed no

Statistical testing of the full-range leadership theory in nursing.

PubMed

Kanste, Outi; Kääriäinen, Maria; Kyngäs, Helvi

2009-12-01

The aim of this study is to test statistically the structure of the full-range leadership theory in nursing. The data were gathered by postal questionnaires from nurses and nurse leaders working in healthcare organizations in Finland. A follow-up study was performed 1 year later. The sample consisted of 601 nurses and nurse leaders, and the follow-up study had 78 respondents. Theory was tested through structural equation modelling, standard regression analysis and two-way anova. Rewarding transformational leadership seems to promote and passive laissez-faire leadership to reduce willingness to exert extra effort, perceptions of leader effectiveness and satisfaction with the leader. Active management-by-exception seems to reduce willingness to exert extra effort and perception of leader effectiveness. Rewarding transformational leadership remained as a strong explanatory factor of all outcome variables measured 1 year later. The data supported the main structure of the full-range leadership theory, lending support to the universal nature of the theory.

On the efficacy of procedures to normalize Ex-Gaussian distributions

PubMed Central

Marmolejo-Ramos, Fernando; Cousineau, Denis; Benites, Luis; Maehara, Rocío

2015-01-01

Reaction time (RT) is one of the most common types of measure used in experimental psychology. Its distribution is not normal (Gaussian) but resembles a convolution of normal and exponential distributions (Ex-Gaussian). One of the major assumptions in parametric tests (such as ANOVAs) is that variables are normally distributed. Hence, it is acknowledged by many that the normality assumption is not met. This paper presents different procedures to normalize data sampled from an Ex-Gaussian distribution in such a way that they are suitable for parametric tests based on the normality assumption. Using simulation studies, various outlier elimination and transformation procedures were tested against the level of normality they provide. The results suggest that the transformation methods are better than elimination methods in normalizing positively skewed data and the more skewed the distribution then the transformation methods are more effective in normalizing such data. Specifically, transformation with parameter lambda -1 leads to the best results. PMID:25709588

Self-reported craft expertise predicts maintenance of spatial ability in old age.

PubMed

Bailey, Shannon K T; Sims, Valerie K

2014-05-01

Three hundred and three female participants between the ages of 18 and 77 reported their experience in crafting (sewing, knitting, and crocheting) and completed a measure of spatial ability: The Paper Folding Test. To investigate the connection between spatial ability performance, age, and craft expertise, an ANOVA was conducted for the Paper Folding Test using two levels of crafting expertise (High and Low) and three age categories (younger adults: 18-39, middle-aged adults: 40-59, and older adults: 60-77). Performance on the spatial ability test declined with age as predicted from previous literature. However, there was a significant Age by Expertise interaction. No difference was found between High and Low craft expertise groups in younger adults (18-39), but there was a growing difference between expertise groups in middle-aged adults (40-59) and older adults (60-77). The results suggest that continued hands-on experience in spatial domains is a predictor of maintenance of spatial ability across the life span.

Pregnancy- and delivery-induced biomechanical changes in rat vagina persist postpartum

PubMed Central

Alperin, Marianna; Feola, Andrew; Duerr, Robert; Moalli, Pamela; Abramowitch, Steven

2010-01-01

Introduction and hypothesis We sought to define changes in vaginal distensibility (VD) induced by pregnancy and vaginal delivery using a novel in vivo biomechanical testing protocol. Methods Under sedation, a balloon was inserted into the vagina of 27 virgin, pregnant and 4-week postpartum Long–Evans rats and incrementally distended. Pressure–volume curves were generated with slopes characterizing VD (higher slope = less distensible). One-way ANOVA with a Bonferroni post-hoc test were used for statistical analyses. Results Mean pressures at an infusion volume of 1 cc were lower in pregnant and postpartum rats than in virgins (P<0.001). VD was increased in pregnant vs. virgin rats (P<0.001) and did not recover to virgin levels post partum (P<0.001). Conclusions We have developed a test that measures VD in vivo under clinically relevant loading conditions. The increased VD in the late postpartum period defines a persistent change in biomechanical behavior of the vagina related to pregnancy and vaginal delivery. PMID:20424824

Dental hygiene students' perceptions of distance learning: do they change over time?

PubMed

Sledge, Rhonda; Vuk, Jasna; Long, Susan

2014-02-01

The University of Arkansas for Medical Sciences dental hygiene program established a distant site where the didactic curriculum was broadcast via interactive video from the main campus to the distant site, supplemented with on-line learning via Blackboard. This study compared the perceptions of students towards distance learning as they progressed through the 21 month curriculum. Specifically, the study sought to answer the following questions: Is there a difference in the initial perceptions of students on the main campus and at the distant site toward distance learning? Do students' perceptions change over time with exposure to synchronous distance learning over the course of the curriculum? All 39 subjects were women between the ages of 20 and 35 years. Of the 39 subjects, 37 were Caucasian and 2 were African-American. A 15-question Likert scale survey was administered at 4 different periods during the 21 month program to compare changes in perceptions toward distance learning as students progressed through the program. An independent sample t-test and ANOVA were utilized for statistical analysis. At the beginning of the program, independent samples t-test revealed that students at the main campus (n=34) perceived statistically significantly higher effectiveness of distance learning than students at the distant site (n=5). Repeated measures of ANOVA revealed that perceptions of students at the main campus on effectiveness and advantages of distance learning statistically significantly decreased whereas perceptions of students at distant site statistically significantly increased over time. Distance learning in the dental hygiene program was discussed, and replication of the study with larger samples of students was recommended.

Virtual reality, ultrasound-guided liver biopsy simulator: development and performance discrimination.

PubMed

Johnson, S J; Hunt, C M; Woolnough, H M; Crawshaw, M; Kilkenny, C; Gould, D A; England, A; Sinha, A; Villard, P F

2012-05-01

The aim of this article was to identify and prospectively investigate simulated ultrasound-guided targeted liver biopsy performance metrics as differentiators between levels of expertise in interventional radiology. Task analysis produced detailed procedural step documentation allowing identification of critical procedure steps and performance metrics for use in a virtual reality ultrasound-guided targeted liver biopsy procedure. Consultant (n=14; male=11, female=3) and trainee (n=26; male=19, female=7) scores on the performance metrics were compared. Ethical approval was granted by the Liverpool Research Ethics Committee (UK). Independent t-tests and analysis of variance (ANOVA) investigated differences between groups. Independent t-tests revealed significant differences between trainees and consultants on three performance metrics: targeting, p=0.018, t=-2.487 (-2.040 to -0.207); probe usage time, p = 0.040, t=2.132 (11.064 to 427.983); mean needle length in beam, p=0.029, t=-2.272 (-0.028 to -0.002). ANOVA reported significant differences across years of experience (0-1, 1-2, 3+ years) on seven performance metrics: no-go area touched, p=0.012; targeting, p=0.025; length of session, p=0.024; probe usage time, p=0.025; total needle distance moved, p=0.038; number of skin contacts, p<0.001; total time in no-go area, p=0.008. More experienced participants consistently received better performance scores on all 19 performance metrics. It is possible to measure and monitor performance using simulation, with performance metrics providing feedback on skill level and differentiating levels of expertise. However, a transfer of training study is required.

Evaluation of chlorhexidine gluconate mouthrinse-induced staining using a digital colorimeter: an in vivo study.

PubMed

Bagis, Bora; Baltacioglu, Esra; Özcan, Mutlu; Ustaomer, Seda

2011-03-01

To investigate the persistence of staining after the use of chlorhexidine gluconate mouthrinse. Twenty-four subjects (nine women and 15 men) who underwent periodontal therapy and were prescribed the use of 0.2% chlorhexidine gluconate mouthrinse participated in this study. Color values of maxillary central incisors, canines, and first molars were recorded at baseline; 3 days; and 1, 2, and 3 weeks of twice-daily chlorhexidine gluconate use with a digital intraoral colorimeter according to the CIE L*a*b* coordinates. While color-change (Delta E) values showed significant differences (P=.020) at different time points (10.1, 8.9, 8.9, 9.4, after 3 days and 1, 2, and 3 weeks, respectively), the duration of chlorhexidine gluconate use did not significantly affect the results (P=.873) (two-way ANOVA, Tukey test). No significant difference was found among Delta L* (P=.070), Delta a* (P=.169), and Delta b* (P=.691) values at any time point (one-way ANOVA). Measurements of baseline to day 3 differences showed significantly higher Delta E values than those at other time points (P<.05), but this change remained nonsignificant after 1, 2, and 3 weeks of chlorhexidine gluconate use (P>.05) (Tukey test). The highest visible staining occurred on the first molars at all time points (83%, 79%, 79%, and 96% after 3 days and 1, 2, and 3 weeks, respectively) compared to the other teeth evaluated. The staining effect of chlorhexidine gluconate mouthrinse on natural dentition should be expected to be the highest in the first few days of use.

A randomized controlled trial of the effect of a photographic display with and without music on pre-operative anxiety.

PubMed

Gómez-Urquiza, Jose L; Hueso-Montoro, César; Urquiza-Olmo, Josefa; Ibarrondo-Crespo, Rocío; González-Jiménez, Emilio; Schmidt-Riovalle, Jacqueline

2016-07-01

To determine the effectiveness of photographic display at reducing pre-operative anxiety in an ear, nose and throat surgery unit; alone and in combination with music. The waiting time prior to the surgery is often unpleasant and a time of anxiety for patients. Anxiety can affect physical recovery and psychological well-being; lengthening convalescence and hospital stay after the surgery. Improving pre-operative anxiety is a challenge with potential impacts on improving patients' satisfaction and well-being and decreasing the cost of care. A clinical trial was conducted with two intervention groups and one control group. The sample consisted of 180 subjects from the otolaryngology major ambulatory surgery unit in a tertiary hospital in the province of Granada, with 60 subjects per group. The outcome variables measured were state anxiety, heart and respiratory rate and blood pressure. The data were collected from May-December 2013. After the intervention, in the comparison between control group and photographic display group, all variables had lower means in the intervention group, although a significant P value was only obtained for respiratory rate using one-way anova test. When comparing control group and photographic display combined with music group, using one-way anova test, all mean values were lower in the intervention group and a significant P value were observed for all variables except diastolic blood pressure. Photographic display in combination with music is more effective at reducing pre-operative anxiety than the standard intervention and photographic display alone. © 2016 John Wiley & Sons Ltd.

The effect of hydrogen peroxide concentration on metal ion release from dental casting alloys.

PubMed

Al-Salehi, S K; Hatton, P V; Johnson, A; Cox, A G; McLeod, C

2008-04-01

There are concerns that tooth bleaching agents may adversely affect dental materials. The aim of this study was to test the hypothesis that increasing concentrations of hydrogen peroxide (HP) are more effective than water at increasing metal ion release from two typical dental casting alloys during bleaching. Discs (n = 28 for each alloy) were prepared by casting and heat treated to simulate a typical porcelain-firing cycle. Discs (n = 7) of each alloy were immersed in either 0%, 3%, 10% or 30% (w/v) HP solutions for 24 h at 37 degrees C. Samples were taken for metal ion release determination using inductively coupled plasma-mass spectrometry and the data analysed using a two-way anova followed by a one-way anova. The surface roughness of each disc was measured using a Talysurf contact profilometer before and after bleaching and the data analysed using a paired t-test. With the exception of gold, the differences in metal ion concentration after treatment with 0% (control) and each of 3%, 10% and 30% HP (w/v) were statistically significant (P < 0.05). Metal ion release from the two alloys increased with increasing HP concentrations (over 3000% increase in Ni and 1400% increase in Pd ions were recorded when HP concentration increased from 0% to 30%). Surface roughness values of the samples before and after bleaching were not significantly different (P > 0.05) Exposure of the two dental casting alloys to HP solutions increased metal ion release of all the elements except gold.

Multiple intelligences and alternative teaching strategies: The effects on student academic achievement, conceptual understanding, and attitude

NASA Astrophysics Data System (ADS)

Baragona, Michelle

The purpose of this study was to investigate the interactions between multiple intelligence strengths and alternative teaching methods on student academic achievement, conceptual understanding and attitudes. The design was a quasi-experimental study, in which students enrolled in Principles of Anatomy and Physiology, a developmental biology course, received lecture only, problem-based learning with lecture, or peer teaching with lecture. These students completed the Multiple Intelligence Inventory to determine their intelligence strengths, the Students' Motivation Toward Science Learning questionnaire to determine student attitudes towards learning in science, multiple choice tests to determine academic achievement, and open-ended questions to determine conceptual understanding. Effects of intelligence types and teaching methods on academic achievement and conceptual understanding were determined statistically by repeated measures ANOVAs. No significance occurred in academic achievement scores due to lab group or due to teaching method used; however, significant interactions between group and teaching method did occur in students with strengths in logical-mathematical, interpersonal, kinesthetic, and intrapersonal intelligences. Post-hoc analysis using Tukey HSD tests revealed students with strengths in logical-mathematical intelligence and enrolled in Group Three scored significantly higher when taught by problem-based learning (PBL) as compared to peer teaching (PT). No significance occurred in conceptual understanding scores due to lab group or due to teaching method used; however, significant interactions between group and teaching method did occur in students with strengths in musical, kinesthetic, intrapersonal, and spatial intelligences. Post-hoc analysis using Tukey HSD tests revealed students with strengths in logical-mathematical intelligence and enrolled in Group Three scored significantly higher when taught by lecture as compared to PBL. Students with strengths in intrapersonal intelligence and enrolled in Group One scored significantly lower when taught by lecture as compared to PBL. Results of a repeated measures ANOVA for student attitudes showed significant increases in positive student attitudes toward science learning for all three types of teaching method between pretest and posttest; but there were no significant differences in posttest attitude scores by type of teaching method.

Modified Team-Based Learning in an Ophthalmology Clerkship in China

PubMed Central

Zhou, Yuxian; Ao, Yong; Xin, Wei; Jia, Yu; Yang, Ying; Cai, Yu; Xu, Chaochao; Yang, Yangfan; Lin, Haotian

2016-01-01

Objective Team-based learning (TBL) is an increasingly popular teaching method in medical education. However, TBL hasn’t been well-studied in the ophthalmology clerkship context. This study was to examine the impact of modified TBL in such context and to assess the student evaluations of TBL. Methods Ninety-nine students of an 8-year clinical medicine program from Zhongshan Ophthalmic Centre, Sun Yat-sen University, were randomly divided into four sequential units and assigned to six teams with the same faculty. The one-week ophthalmology clerkship module included traditional lectures, gross anatomy and a TBL module. The effects of the TBL module on student performance were measured by the Individual Readiness Assurance Test (IRAT), the Group Readiness Assurance Test (GRAT), the Group Application Problem (GAP) and final examination scores (FESs). Students’ evaluations of TBL were measured by a 16-item questionnaire. IRAT and GRAT scores were compared using a paired t-test. One-way analysis of variance (ANOVA) and subgroup analysis compared the effects among quartiles that were stratified by the Basic Ophthalmology Levels (BOLs). The BOLs were evaluated before the ophthalmology clerkship. Results In TBL classes, the GRAT scores were significantly higher than the IRAT scores in both the full example and the BOL-stratified groups. It highlighted the advantages of TBL compared to the individual learning. Quartile-stratified ANOVA comparisons showed significant differences at FES scores (P < 0.01). In terms to IRAT, GRAT and GAP scores, there was no significant result. Moreover, IRAT scores only significantly differed between the first and fourth groups. The FES scores of the first three groups are significantly higher than the fourth group. Gender-specific differences were significant in FES but not the IRAT. Overall, 57.65% of student respondents agreed that TBL was helpful. Male students tended to rate TBL higher than female students. Conclusion The application of modified TBL to the ophthalmology clerkship curriculum improved students’ performance and increased students’ engagement and satisfaction. TBL should be further optimized and developed to enhance the educational outcomes among multi-BOLs medical students. PMID:27100286

Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics.

PubMed

Lazar, Dolores R R; Bottino, Marco C; Ozcan, Mutlu; Valandro, Luiz Felipe; Amaral, Regina; Ussui, Valter; Bressiani, Ana H A

2008-12-01

(1) To synthesize 3mol% yttria-stabilized zirconia (3Y-TZP) powders via coprecipitation route, (2) to obtain zirconia ceramic specimens, analyze surface characteristics, and mechanical properties, and (3) to compare the processed material with three reinforced dental ceramics. A coprecipitation route was used to synthesize a 3mol% yttria-stabilized zirconia ceramic processed by uniaxial compaction and pressureless sintering. Commercially available alumina or alumina/zirconia ceramics, namely Procera AllCeram (PA), In-Ceram Zirconia Block (CAZ) and In-Ceram Zirconia (IZ) were chosen for comparison. All specimens (6mmx5mmx5mm) were polished and ultrasonically cleaned. Qualitative phase analysis was performed by XRD and apparent densities were measured on the basis of Archimedes principle. Ceramics were also characterized using SEM, TEM and EDS. The hardness measurements were made employing Vickers hardness test. Fracture toughness (K(IC)) was calculated. Data were analyzed using one-way analysis of variance (ANOVA) and Tukey's test (alpha=0.05). ANOVA revealed that the Vickers hardness (p<0.0001) and fracture toughness (p<0.0001) were affected by the ceramic materials composition. It was confirmed that the PA ceramic was constituted of a rhombohedral alumina matrix, so-called alpha-alumina. Both CAZ and IZ ceramics presented tetragonal zirconia and alpha-alumina mixture of phases. The SEM/EDS analysis confirmed the presence of aluminum in PA ceramic. In the IZ and CAZ ceramics aluminum, zirconium and cerium in grains involved by a second phase containing aluminum, silicon and lanthanum were identified. PA showed significantly higher mean Vickers hardness values (H(V)) (18.4+/-0.5GPa) compared to vitreous CAZ (10.3+/-0.2GPa) and IZ (10.6+/-0.4GPa) ceramics. Experimental Y-TZP showed significantly lower results than that of the other monophased ceramic (PA) (p<0.05) but it showed significantly higher fracture toughness (6.0+/-0.2MPam(1/2)) values when compared to the other tested ceramics (p<0.05). The coprecipitation method used to synthesize zirconia powders and the adopted ceramic processing conditions led to ceramics with mechanical properties comparable to commercially available reinforced ceramic materials.

Hippocampal and Parahippocampal Volumes in Schizophrenia: A Structural MRI Study

PubMed Central

Sim, Kang; DeWitt, Iain; Ditman, Tali; Zalesak, Martin; Greenhouse, Ian; Goff, Donald; Weiss, Anthony P; Heckers, Stephan

2006-01-01

Smaller medial temporal lobe volume is a frequent finding in studies of patients with schizophrenia, but the relative contributions of the hippocampus and three surrounding cortical regions (entorhinal cortex, perirhinal cortex, and parahippocampal cortex) are poorly understood. We tested the hypothesis that the volumes of medial temporal lobe regions are selectively changed in schizophrenia. We studied 19 male patients with schizophrenia and 19 age-matched male control subjects. Hippocampal and cortical volumes were estimated using a three-dimensional morphometric protocol for the analysis of high-resolution structural magnetic resonance images, and repeated measures ANOVA was used to test for region-specific differences. Patients had smaller overall medial temporal lobe volumes compared to controls. The volume difference was not specific for either region or hemisphere. The finding of smaller medial temporal lobe volumes in the absence of regional specificity has important implications for studying the functional role of the hippocampus and surrounding cortical regions in schizophrenia. PMID:16319377

[The effects of an environmental education with newspaper in education (NIE) on the environmental concern and practice].

PubMed

Sung, Ki-Wol

2008-12-01

The purpose of this study was to develop an environmental education program using newspaper articles in education (NIE) and to evaluate changes in concern and practice for environmental protection after NIE. The design was a nonequivalent control group pretest-posttest design. The participants were university students in nursing, of which 31 were assigned to the experimental group and 43 to the control group. The education was carried out for 2 hr, once a week for 7 weeks. Data were analyzed with SPSS WIN 14 program, and included chi2 test, independent t-test, and repeated measure ANOVA. NIE showed significant differences in the changes of attitude toward environment (F=4.461, p=.036). Findings suggest that this NIE in environmental education was effective in changing students' attitudes toward the environment. Therefore this NIE is recommended for inclusion in education for university students in nursing.

[Effect of simulated microgravity on peripheral oxygen saturation in rats].

PubMed

Chen, Guangfei; Zhang, Yahui; Yuan, Ming; He, Shilin; Ying, Jun; Li, Chen

2018-02-01

To study the effect of microgravity on peripheral oxygen saturation (SpO 2 ) in rats, tail-suspended rats were applied to simulate microgravity environment. SpO 2 and arterial oxygen saturation (SaO 2 ) were measured by pulse oximeter and arterial blood gas analyzer (ABGA) respectively on the 14th day, 21st day and 28th day in tail-suspended group and control group. Paired t -test shows that SpO 2 was significantly lower than SaO 2 in tail-suspended group on the 14th day ( P < 0.05), the 21st day ( P < 0.05) and the 28th day ( P < 0.01). The ANOVA results shows that modeling time had significant effect on SpO 2 value but no effect on SaO 2 value in tail-suspended group. These results indicate that pulse oximeter may be not suitable for oxygen saturation test in microgravity environment.

[Effects of Breastfeeding Empowerment Program on Breastfeeding Self-efficacy, Adaptation and Continuation in Primiparous Women].

PubMed

Song, Seon Mi; Park, Mi Kyung

2016-06-01

The purpose of this study was to develop a breastfeeding empowerment program and to investigate the effects of the breastfeeding empowerment program on self-efficacy, adaptation and continuation of breastfeeding for primiparous women. The 5 session breastfeeding empowerment program was developed and a non-equivalent control group non-synchronized quasi-experiment design was used. Fifty-five participants were assigned to either the experimental group (n=27) or the control group (n=28). Effects were tested using repeated measures ANOVA and χ²-test. Scores for self-efficacy, adaptation and continuation of breastfeeding of in the experimental group after program were significantly higher than 1 week, 4 weeks, 8 weeks scores in control group. The effects of the breastfeeding empowerment program for elevating self-efficacy, adaptation and continuation of breastfeeding in primiparous women were validated. Therefore, this program can be recommended for vigorous use in clinical practice.

Otoacoustic emissions in the general adult population of Nord-Trøndelag, Norway: III. Relationships with pure-tone hearing thresholds.

PubMed

Engdahl, Bo; Tambs, Kristian; Borchgrevink, Hans M; Hoffman, Howard J

2005-01-01

This study aims to describe the association between otoacoustic emissions (OAEs) and pure-tone hearing thresholds (PTTs) in an unscreened adult population (N =6415), to determine the efficiency by which TEOAEs and DPOAEs can identify ears with elevated PTTs, and to investigate whether a combination of DPOAE and TEOAE responses improves this performance. Associations were examined by linear regression analysis and ANOVA. Test performance was assessed by receiver operator characteristic (ROC) curves. The relation between OAEs and PTTs appeared curvilinear with a moderate degree of non-linearity. Combining DPOAEs and TEOAEs improved performance. Test performance depended on the cut-off thresholds defining elevated PTTs with optimal values between 25 and 45 dB HL, depending on frequency and type of OAE measure. The unique constitution of the present large sample, which reflects the general adult population, makes these results applicable to population-based studies and screening programs.

The effects of progressive muscle relaxation and autogenic relaxation on young soccer players' mood states.

PubMed

Hashim, Hairul Anuar; Hanafi Ahmad Yusof, Hazwani

2011-06-01

This study was designed to compare the effects of two different relaxation techniques, namely progressive muscle relaxation (PMR) and autogenic relaxation (AGR) on moods of young soccer players. sixteen adolescent athletes (mean age: 14.1 ± 1.3) received either PMR or AGR training. Using Profile of Mood States- Adolescents, their mood states were measured one week before relaxation training, before the first relaxation session, and after the twelfth relaxation session. Mixed ANOVA revealed no significant interaction effects and no significant main effects in any of the subscales. However, significant main effects for testing sessions were found for confusion, depression, fatigue, and tension subscales. Post hoc tests revealed post-intervention reductions in the confusion, depression, fatigue, and tension subscale scores. These two relaxation techniques induce equivalent mood responses and may be used to regulate young soccer players' mood states.

The Effects of Progressive Muscle Relaxation and Autogenic Relaxation on Young Soccer Players’ Mood States

PubMed Central

Hashim, Hairul Anuar; Hanafi@Ahmad Yusof, Hazwani

2011-01-01

Purpose This study was designed to compare the effects of two different relaxation techniques, namely progressive muscle relaxation (PMR) and autogenic relaxation (AGR) on moods of young soccer players. Methods Sixteen adolescent athletes (mean age: 14.1 ± 1.3) received either PMR or AGR training. Using Profile of Mood States- Adolescents, their mood states were measured one week before relaxation training, before the first relaxation session, and after the twelfth relaxation session. Results Mixed ANOVA revealed no significant interaction effects and no significant main effects in any of the subscales. However, significant main effects for testing sessions were found for confusion, depression, fatigue, and tension subscales. Post hoc tests revealed post-intervention reductions in the confusion, depression, fatigue, and tension subscale scores. Conclusion These two relaxation techniques induce equivalent mood responses and may be used to regulate young soccer players’ mood states. PMID:22375225

A hybrid anchored-ANOVA - POD/Kriging method for uncertainty quantification in unsteady high-fidelity CFD simulations

NASA Astrophysics Data System (ADS)

Margheri, Luca; Sagaut, Pierre

2016-11-01

To significantly increase the contribution of numerical computational fluid dynamics (CFD) simulation for risk assessment and decision making, it is important to quantitatively measure the impact of uncertainties to assess the reliability and robustness of the results. As unsteady high-fidelity CFD simulations are becoming the standard for industrial applications, reducing the number of required samples to perform sensitivity (SA) and uncertainty quantification (UQ) analysis is an actual engineering challenge. The novel approach presented in this paper is based on an efficient hybridization between the anchored-ANOVA and the POD/Kriging methods, which have already been used in CFD-UQ realistic applications, and the definition of best practices to achieve global accuracy. The anchored-ANOVA method is used to efficiently reduce the UQ dimension space, while the POD/Kriging is used to smooth and interpolate each anchored-ANOVA term. The main advantages of the proposed method are illustrated through four applications with increasing complexity, most of them based on Large-Eddy Simulation as a high-fidelity CFD tool: the turbulent channel flow, the flow around an isolated bluff-body, a pedestrian wind comfort study in a full scale urban area and an application to toxic gas dispersion in a full scale city area. The proposed c-APK method (anchored-ANOVA-POD/Kriging) inherits the advantages of each key element: interpolation through POD/Kriging precludes the use of quadrature schemes therefore allowing for a more flexible sampling strategy while the ANOVA decomposition allows for a better domain exploration. A comparison of the three methods is given for each application. In addition, the importance of adding flexibility to the control parameters and the choice of the quantity of interest (QoI) are discussed. As a result, global accuracy can be achieved with a reasonable number of samples allowing computationally expensive CFD-UQ analysis.

The combined effect of food-simulating solutions, brushing and staining on color stability of composite resins

PubMed Central

Silva, Tânia Mara Da; Sales, Ana Luísa Leme Simões; Pucci, Cesar Rogerio; Borges, Alessandra Bühler; Torres, Carlos Rocha Gomes

2017-01-01

Abstract Objective: This study evaluated the effect of food-simulating media associated with brushing and coffee staining on color stability of different composite resins. Materials and methods: Eighty specimens were prepared for each composite: Grandio SO (Voco), Amaris (Voco), Filtek Z350XT (3M/ESPE), Filtek P90 (3M/ESPE). They were divided into four groups according to food-simulating media for 7 days: artificial saliva (control), heptane, citric acid and ethanol. The composite surface was submitted to 10,950 brushing cycles (200 g load) in an automatic toothbrushing machine. The specimens were darkened with coffee solution at 37 °C for 24 h. After each treatment, color measurements were assessed by spectrophotometry, using CIE L*a*b* system. The overall color change (ΔE) was determined for each specimen at baseline (C1) and after the treatments (food-simulating media immersion/C2, brushing/C3 and dye solution/C4). Data were analyzed by two-way repeated measures ANOVA and Tukey’s tests (p < .05). Results: The results of RM-ANOVA showed significant differences for composites (p = .001), time (p = .001) and chemical degradation (p = .002). The mean of ΔE for composites were: Z350XT (5.39)a, Amaris (3.89)b, Grandio (3.75)bc, P90 (3.36)c. According to food-simulating media: heptane (4.41)a, citric acid (4.24)a, ethanol (4.02)ab, artificial saliva (3.76)b. For the treatments: dye solution (4.53)a, brushing (4.26)a, after food-simulating media (3.52)b. Conclusions: The composite resin Filtek Z350XT showed significantly higher staining than all other composite resin tested. The immersion in heptane and citric acid produced the highest color alteration than other food-simulating media. The exposure of samples to brushing protocols and darkening in coffee solution resulted in significant color alteration of the composite resins. PMID:28642926

Student Expenses in Residency Interviewing

PubMed Central

Walling, Anne; Nilsen, Kari; Callaway, Paul; Grothusen, Jill; Gillenwater, Cole; King, Samantha; Unruh, Gregory

2017-01-01

Background The student costs of residency interviewing are of increasing concern but limited current information is available. Updated, more detailed information would assist students and residency programs in decisions about residency selection. The study objective was to measure the expenses and time spent in residency interviewing by the 2016 graduating class of the University of Kansas School of Medicine and assess the impact of gender, regional campus location, and primary care application. Methods All 195 students who participated in the 2016 National Residency Matching Program (NRMP) received a 33 item questionnaire addressing interviewing activity, expenses incurred, time invested and related factors. Main measures were self-reported estimates of expenses and time spent interviewing. Descriptive analyses were applied to participant characteristics and responses. Multivariate analysis of variance (MANOVA) and chi-square tests compared students by gender, campus (main/regional), and primary care/other specialties. Analyses of variance (ANOVA) on the dependent variables provided follow-up tests on significant MANOVA results. Results A total of 163 students (84%) completed the survey. The average student reported 38 (1–124) applications, 16 (1–54) invitations, 11 (1–28) completed interviews, and spent $3,500 ($20–$12,000) and 26 (1–90) days interviewing. No significant differences were found by gender. After MANOVA and ANOVA analyses, non-primary care applicants reported significantly more applications, interviews, and expenditures, but less program financial support. Regional campus students reported significantly fewer invitations, interviews, and days interviewing, but equivalent costs when controlled for primary care application. Cost was a limiting factor in accepting interviews for 63% and time for 53% of study respondents. Conclusions Students reported investing significant time and money in interviewing. After controlling for other variables, primary care was associated with significantly lowered expenses. Regional campus location was associated with fewer interviews and less time interviewing. Gender had no significant impact on any aspect studied. PMID:29472969

Lifestyle Change Plus Dental Care (LCDC) program improves knowledge, attitude, and practice (KAP) toward oral health and diabetes mellitus among the elderly with type 2 diabetes.

PubMed

Saengtipbovorn, Saruta; Taneepanichskul, Surasak

2015-03-01

Currently, there is an increased prevalence of diabetes mellitus among the elderly. Chronic inflammation from diabetes mellitus effects glycemic control and increases risk of diabetes complications. To assess the effectiveness of a Lifestyle Change plus Dental Care (LCDC) program by improved knowledge, attitude, and practice (KAP) toward oral health and diabetes mellitus among the elderly with type 2 diabetes. A quasi-experimental study was conducted in two Health Centers (HC 54 intervention and HC 59 control) between October 2013 and April 2014. Sixty-six diabetic patients per health center were recruited. At baseline, the intervention group attended a 20-minute lifestyle and oral health education program, individual lifestyle counseling using motivational interviewing, application of self-regulation manual, and individual oral hygiene instruction. At 3-month follow-up, the intervention group received individual lifestyle counseling and oral hygiene instruction. The intervention group received booster education every visit by viewing a 15-minute educational video. The control group received the routine program. Participants were assessed at baseline, 3-month, and 6-month follow-up for knowledge, attitude, and practice (KAP) toward oral health and diabetes mellitus. Data was analyzed by using descriptive statistic, Chi-square test, Fisher's exact test, and repeated measure ANOVA. After the 6-month follow-up, repeated measure ANOVA analysis showed that participants in the intervention group had significantly higher knowledge and attitude toward oral health and diabetes mellitus. The participants in the intervention group were more likely to exercise, modify diet, have foot examinations, always wear covered shoes, participate in self-feet screening, use dental floss, and use inter-proximal brush than the control group with statistically significant differences. The combination of lifestyle change and dental care in one program improved knowledge, attitude, andpractice (KAP) toward oral health and diabetes mellitus in the elderly with type 2 diabetes. Trial registration: ClinicalTrials.in.th: TCTR20140602001.

Effects of coronal substrates and water storage on the microhardness of a resin cement used for luting ceramic crowns

PubMed Central

de MENDONÇA, Luana Menezes; PEGORARO, Luiz Fernando; LANZA, Marcos Daniel Septímio; PEGORARO, Thiago Amadei; de CARVALHO, Ricardo Marins

2014-01-01

Composite resin and metallic posts are the materials most employed for reconstruction of teeth presenting partial or total destruction of crowns. Resin-based cements have been widely used for cementation of ceramic crowns. The success of cementation depends on the achievement of adequate cement curing. Objectives To evaluate the microhardness of Variolink® II (Ivoclar Vivadent, Schaan, Liechtenstein), used for cementing ceramic crowns onto three different coronal substrate preparations (dentin, metal, and composite resin), after 7 days and 3 months of water storage. The evaluation was performed along the cement line in the cervical, medium and occlusal thirds on the buccal and lingual aspects, and on the occlusal surface. Material and Methods Thirty molars were distributed in three groups (N=10) according to the type of coronal substrate: Group D- the prepared surfaces were kept in dentin; Groups M (metal) and R (resin)- the crowns were sectioned at the level of the cementoenamel junction and restored with metallic cast posts or resin build-up cores, respectively. The crowns were fabricated in ceramic IPS e.max® Press (Ivoclar Vivadent, Schaan, Liechtenstein) and luted with Variolink II. After 7 days of water storage, 5 specimens of each group were sectioned in buccolingual direction for microhardness measurements. The other specimens (N=5) were kept stored in deionized water at 37ºC for three months, followed by sectioning and microhardness measurements. Results Data were first analyzed by three-way ANOVA that did not reveal significant differences between thirds and occlusal surface (p=0.231). Two-way ANOVA showed significant effect of substrates (p<0.001) and the Tukey test revealed that microhardness was significantly lower when crowns were cemented on resin cores and tested after 7 days of water storage (p=0.007). Conclusion The type of material employed for coronal reconstruction of preparations for prosthetic purposes may influence the cement properties. PMID:25141200

Anterior Tibial Translation in Collegiate Athletes with Normal Anterior Cruciate Ligament Integrity

PubMed Central

Rosene, John M.; Fogarty, Tracey D.

1999-01-01

Objective: To examine differences in anterior tibial translation (ATT) among sports, sex, and leg dominance in collegiate athletes with normal anterior cruciate ligament integrity. Design and Setting: Subjects from various athletic teams were measured for ATT in right and left knees. Subjects: Sixty subjects were measured for ATT with a KT-1000 knee arthrometer. Measurements: Statistical analyses were computed for each sex and included a 2 × 3 × 4 mixed-factorial analysis of variance (ANOVA) for anterior cruciate ligament displacement, right and left sides, and force and sport. A 2 × 2 × 3 mixed-factorial ANOVA was computed to compare means for sex and force. A 2 × 3 mixed-factorial ANOVA was computed to compare sex differences across 3 forces. Results: For males and females, no significant interactions were found among leg, force, and sport for mean ATT, for leg and sport or leg and force, or for translation values between dominant and nondominant legs. Males had a significant interaction for force and sport, and a significant difference was found for side of body, since the right side had less translation than the left side. Females had greater ATT than males at all forces. Conclusions: Sex differences exist for ATT, and differences in ATT exist among sports for both sexes. Differences between the right and left sides of the body should be expected when making comparisons of ligamentous laxity. ImagesFigure 2.Figure 3.Figure 5. PMID:16558565

Effects of Water-Based Training on Static and Dynamic Balance of Older Women.

PubMed

Bento, Paulo Cesar Barauce; Lopes, Maria de Fátima A; Cebolla, Elaine Cristine; Wolf, Renata; Rodacki, André L F

2015-08-01

The aim of this study was to evaluate the effects of a water-based exercise program on static and dynamic balance. Thirty-six older women were randomly assigned to a water-based training (3 days/week for 12 weeks) or control group. Water level was kept at the level of the xiphoid process and temperature at ∼28-30°C. Each session included aerobic activities and lower limb strength exercises. The medial-lateral, the anterior-posterior amplitude, and displacement of the center of pressure (CP-D) were measured in a quiet standing position (60 sec eyes opened and closed). The dynamic balance and 8-Foot Up-and-Go tests were also applied. Group comparisons were made using two-way analysis of variance (ANOVA) with repeated measures. No differences were found in the center of pressure variables; however, the WBT group showed better performance in the 8 Foot Up-and-Go Test after training (5.61±0.76 vs. 5.18±0.42; p<0.01). The water-based training was effective in improving dynamic balance, but not static balance.

Comparison of mesiodistal tooth widths in Caucasian, African and Japanese individuals with Brazilian ancestry and normal occlusion.

PubMed

Fernandes, Thais Maria Freire; Sathler, Renata; Natalício, Gabriela Letícia; Henriques, José Fernando Castanha; Pinzan, Arnaldo

2013-01-01

To observe the presence of sexual dimorphism and compare the mesiodistal width of the teeth in Caucasian, African and Japanese individuals with Brazilian ancestry not orthodontically treated and with normal occlusion. One hundred pairs of dental casts were used. It was measured, from first molar to first molar in both arches, the teeth's mesiodistal widths, using a digital caliper. For the statistical analysis of results Kolmogorov-Smirnov, t test, ANOVA and Tukey's test (p < 0.05) were used. Sexual dimorphism occurred on the three evaluated groups, and the highest mesiodistal widths were found in males. There was statistically significant difference between racial groups in all evaluated teeth in males. However, in females, this same difference was found only on upper lateral incisor and first molar; and lower lateral incisor, canine, first premolar and first molar. Most of mesiodistal measures present particular characteristics in relation to gender, with higher values for males, and to race, with a tendency for African to present greater mesiodistal distance of the teeth, followed by Japanese and Caucasians, respectively, important for the correct diagnosis and orthodontic planning.

Documenting the efficacy of virtual reality exposure with psychophysiological and information processing measures.

PubMed

Côté, Sophie; Bouchard, Stéphane

2005-09-01

Many outcome studies have been conducted to assess the efficacy of virtual reality in the treatment of specific phobias. However, most studies used self-report data. The addition of objective measures of arousal and information processing mechanisms would be a valuable contribution in order to validate the usefulness of virtual reality in the treatment of anxiety disorders. The goal of this study was to document the impact of virtual reality exposure (VRE) on cardiac response and automatic processing of threatening stimuli. Twenty-eight adults suffering from arachnophobia were assessed and received an exposure-based treatment using virtual reality. General outcome and specific processes measures included a battery of standardized questionnaires, a pictorial emotional Stroop task, a behavioral avoidance test and a measure of participants' inter-beat intervals (IBI) while they were looking at a live tarantula. Assessment was conducted before and after treatment. Repeated measures ANOVAs revealed that therapy had a positive impact on questionnaire data, as well as on the behavioral avoidance test. Analyses made on the pictorial Stroop task showed that information processing of spider-related stimuli changed after treatment, which also indicates therapeutic success. Psychophysiological data also showed a positive change after treatment, suggesting a decrease in anxiety. In sum, VRE led to significant therapeutic improvements on objective measures as well as on self-report instruments.

Comparison of immersion ultrasound, partial coherence interferometry, and low coherence reflectometry for ocular biometry in cataract patients.

PubMed

Montés-Micó, Robert; Carones, Francesco; Buttacchio, Antonietta; Ferrer-Blasco, Teresa; Madrid-Costa, David

2011-09-01

To compare ocular biometry parameters measured with immersion ultrasound, partial coherence interferometry, and low coherence reflectometry in cataract patients. Measurements of axial length and anterior chamber depth were analyzed and compared using immersion ultrasound, partial coherence interferometry, and low coherence reflectometry. Keratometry (K), flattest axis, and white-to-white measurements were compared between partial coherence interferometry and low coherence reflectometry. Seventy-eight cataract (LOCS II range: 1 to 3) eyes of 45 patients aged between 42 and 90 years were evaluated. A subanalysis as a function of cataract degree was done for axial length and anterior chamber depth between techniques. No statistically significant differences were noted for the study cohort or within each cataract degree among the three techniques for axial length and anterior chamber depth (P>.05, ANOVA test). Measurements between techniques were highly correlated for axial length (R=0.99) and anterior chamber depth (R=0.90 to 0.96) for all methods. Keratometry, flattest axis, and white-to-white measurements were comparable (paired t test, P>.1) and correlated well between partial coherence interferometry and low coherence reflectometry (K1 [R=0.95), K2 [R=0.97], flattest axis [R=0.95], and white-to-white [R=0.92]). Immersion ultrasound, partial coherence interferometry, and low coherence reflectometry provided comparable ocular biometry measurements in cataractous eyes. Copyright 2011, SLACK Incorporated.

Protocol: Testing the Relevance of Acupuncture Theory in the Treatment of Myofascial Pain in the Upper Trapezius Muscle.

PubMed

Elsdon, Dale S; Spanswick, Selina; Zaslawski, Chris; Meier, Peter C

2017-01-01

A protocol for a prospective single-blind parallel four-arm randomized placebo-controlled trial with repeated measures was designed to test the effects of various acupuncture methods compared with sham. Eighty self-selected participants with myofascial pain in the upper trapezius muscle were randomized into four groups. Group 1 received acupuncture to a myofascial trigger point (MTrP) in the upper trapezius. Group 2 received acupuncture to the MTrP in addition to relevant distal points. Group 3 received acupuncture to the relevant distal points only. Group 4 received a sham treatment to both the MTrP and distal points using a deactivated acupuncture laser device. Treatment was applied four times within 2 weeks with outcomes measured throughout the trial and at 2 weeks and 4 weeks posttreatment. Outcome measurements were a 100-mm visual analog pain scale, SF-36, pressure pain threshold, Neck Disability Index, the Upper Extremity Functional Index, lateral flexion in the neck, McGill Pain Questionnaire, Massachusetts General Hospital Acupuncture Sensation Scale, Working Alliance Inventory (short form), and the Credibility Expectance Questionnaire. Two-way analysis of variance (ANOVA) with repeated measures were used to assess the differences between groups. Copyright © 2017 Medical Association of Pharmacopuncture Institute. Published by Elsevier B.V. All rights reserved.

Dentascan – Is the Investment Worth the Hype ???

PubMed Central

Shah, Monali A; Shah, Sneha S; Dave, Deepak

2013-01-01

Background: Open Bone Measurement (OBM) and Bone Sounding (BS) are most reliable but invasive clinical methods for Alveolar Bone Level (ABL) assessment, causing discomfort to the patient. Routinely, IOPAs & OPGs are the commonest radiographic techniques used, which tend to underestimate bone loss and obscure buccal/lingual defects. Novel technique like dentascan (CBCT) eliminates this limitation by giving images in 3 planes – sagittal, coronal and axial. Aim: To compare & correlate non-invasive 3D radiographic technique of Dentascan with BS & OBM, and IOPA and OPG, in assessing the ABL. Settings and Design: Cross-sectional diagnostic study. Material and Methods: Two hundred and five sites were subjected to clinical and radiographic diagnostic techniques. Relative distance between the alveolar bone crest and reference wire was measured. All the measurements were compared and tested against the OBM. Statistical Analysis: Student’s t-test, ANOVA, Pearson correlation coefficient. Results: There is statistically significant difference between dentascan and OBM, only BS showed agreement with OBM (p < 0.05). Dentascan weakly correlated with OBM & BS lingually.Rest all techniques showed statistically significant difference between them (p= 0.00). Conclusion: Within the limitations of this study, only BS seems to be comparable with OBM with no superior result of Dentascan over the conventional techniques, except for lingual measurements. PMID:24551722

Abdominal insufflation for laparoscopy increases intracranial and intrathoracic pressure in human subjects.

PubMed

Kamine, Tovy Haber; Elmadhun, Nassrene Y; Kasper, Ekkehard M; Papavassiliou, Efstathios; Schneider, Benjamin E

2016-09-01

Laparoscopy has emerged as an alternative to laparotomy in select trauma patients. In animal models, increasing abdominal pressure is associated with an increase in intrathoracic and intracranial pressures. We conducted a prospective trial of human subjects who underwent laparoscopic-assisted ventriculoperitoneal shunt placement (lap VPS) with intraoperative measurement of intrathoracic, intracranial and cerebral perfusion pressures. Ten patients undergoing lap VPS were recruited. Abdominal insufflation was performed using CO2 to 0, 8, 10, 12 and 15 mmHg. ICP was measured through the ventricular catheter simultaneously with insufflation and with desufflation using a manometer. Peak inspiratory pressures (PIP) were measured through the endotracheal tube. Blood pressure was measured using a noninvasive blood pressure cuff. End-tidal CO2 (ETCO2) was measured for each set of abdominal pressure level. Pressure measurements from all points of insufflation were compared using a two-way ANOVA with a post hoc Bonferroni test. Mean changes in pressures were compared using t test. ICP and PIP increased significantly with increasing abdominal pressure (both p < 0.01), whereas cerebral perfusion pressure (CPP) and mean arterial pressure did not significantly change with increasing abdominal pressure over the range tested. Higher abdominal pressure values were associated with decreased ETCO2 values. Increased ICP and PIP appear to be a direct result of increasing abdominal pressure, since ETCO2 did not increase. Though CPP did not change over the range tested, the ICP in some patients with 15 mmHg abdominal insufflation reached values as high as 32 cmH2O, which is considered above tolerance, regardless of the CPP. Laparoscopy should be used cautiously, in patients who present with baseline elevated ICP or head trauma as abdominal insufflation affects intracranial pressure.

Effect of Paneer and Cheese Consumption on Salivary Acidogenicity and Calcium Concentration: A Comparative Study.

PubMed

Somaraj, Vinej; Shenoy, Rekha P; Panchmal, Ganesh Shenoy; Jodalli, Praveen S; Sonde, Laxminarayan; Nagaraj, Kundapur

2018-01-01

To assess and compare the salivary pH reversal phenomenon and calcium concentration in subjects consuming paneer and cheese after an acidogenic challenge and also to compare the salivary pH measurements using pH strips and a portable pen-type pH meter. Sixty caries free undergraduate students were randomly selected and divided into two group: 1. paneer; 2. cheese. After determining the resting salivary pH using pH strips and a pen-type pH meter, participants were subjected to an acidogenic challenge (10% sucrose). Following consumption of test foods (10-gram cubes), salivary pH was measured at intervals of 5, 10, 15, 30 and 60 min to record the time taken for the salivary pH to return to baseline. Colorimetric salivary calcium concentration was estimated (Biochemical Analyzer) at baseline and after 60 min of test food consumption. The statistical tests used were Shapiro-Wilk's test for normality, repeated measures ANOVA, and the independent t-test. Test meals reversed the fall in pH after acidogenic challenge starting at 5 min and returning to baseline values after 30 min in both groups (p = 1.000). Colorimetric estimates showed higher salivary calcium concentrations with paneer (p < 0.001). The pen-type pH meter showed superior efficiency in terms of time (p < 0.001) compared to pH strips. The salivary pH reversal phenomenon was evident after consumption of both paneer and cheese following the acidogenic challenge. Consumption of paneer significantly increased salivary calcium concentration. The pen-type pH meter proved to be more efficient.

Reproducibility of an objective four-choice canine vision testing technique that assesses vision at differing light intensities.

PubMed

Annear, Matthew J; Gornik, Kara R; Venturi, Francesca L; Hauptman, Joe G; Bartoe, Joshua T; Petersen-Jones, Simon M

2013-09-01

The increasing importance of canine retinal dystrophy models means accurate vision testing is needed. This study was performed to evaluate a four-choice vision testing technique for any difference in outcome measures with repeated evaluations of the same dogs.   Four 11-month-old RPE65-deficient dogs. Vision was evaluated using a previously described four-choice vision testing device. Four evaluations were performed at 2-week intervals. Vision was assessed at six different white light intensities (bright through dim), and each eye was evaluated separately. The ability to select the one of the four exit tunnels that was open at the far end was assessed ('choice of exit') and recorded as correct or incorrect first tunnel choice. 'Time to exit' the device was also recorded. Both outcomes were analyzed for significance using anova. We hypothesized that performance would improve with repeated testing (more correct choices and more rapid time to exit). 'Choice of exit' did not vary significantly between each evaluation (P = 0.12), in contrast 'time to exit' increased significantly (P = 0.012), and showed greater variability in dim light conditions. We found no evidence to support the hypothesis that either measure of outcome worsened with repeated testing; in fact, the 'time to exit' outcome worsened rather than improved. The 'choice of exit' gave consistent results between trials. These outcome data indicate the importance of including a choice-based assessment of vision in addition to measurement of device transit time. © 2012 American College of Veterinary Ophthalmologists.

[Reliability study on the infrared spectrometry for measuring the delta over baseline for breath 13C].

PubMed

Wang, Min; Wang, Zhiling; Gou, Lingyan; Zhang, Yuhui; Yang, Xiaoguang; Sha, Lei; Li, Min

2013-03-01

To assess the validity and reliability of the infrared spectrometry for measuring the delta over baseline for breath 13C. Twenty-four healthy adults were selected, including twelve males and twelve females. 13C-Leucine was used as tracer in stable isotope metabolic experiments. One baseline breath was collected before the tracer protocol began. Other breath samples were collected at 60, 120, 180, 195, 210, 225, 240, 255, 270 and 300 min post-tracer challenge. The delta over baseline for breath 13C was measured by the infrared spectrometry and Heliview 13C breath analyzer. No significant differences were found between the infrared spectrometry and Heliview 13C breath analyzer in measuring the delta over baseline for breath 13C. The F value and p value of two-way ANOVA were 0.29 and 0.5874 respectively. The t and p value of consistency test were 0.48 and 0.6346 respectively. The 13C infrared spectrometry can reliably measure the delta over baseline for breath 13C.

In vitro radiographic determination of distances from working length files to root ends comparing Kodak RVG 6000, Schick CDR, and Kodak insight film.

PubMed

Radel, Robert T; Goodell, Gary G; McClanahan, Scott B; Cohen, Mark E

2006-06-01

Previous studies suggest that digital and film-based radiography are similar for endodontic measurements. This study compared the accuracy and acceptability of measured distances from the tips of size #10 and #15 files to molar root apices in cadaver jaw sections using the newly developed Kodak RVG 6000, and the Schick CDR digital systems to digitized Kodak film. Standardized images were taken of files placed 0.5 to 1.5 mm short of true radiographic lengths. Images were imported into Adobe PhotoShop 7.0, thereby blinding observers who measured distances from files to root apices and assessed images for clarity (acceptability). Repeated measures ANOVA and Tukey-Kramer post hoc tests demonstrated that Kodak RVG 6000 images with enhanced contrast produced significantly less measurement error than unenhanced contrast Schick CDR images (p < 0.05) and significantly higher acceptability ratings than all other systems (all p < 0.002). Among these conditions, the newly developed Kodak RVG 6000 system provided the best overall images.

A Comparative Evaluation of the Linear Dimensional Accuracy of Four Impression Techniques using Polyether Impression Material.

PubMed

Manoj, Smita Sara; Cherian, K P; Chitre, Vidya; Aras, Meena

2013-12-01

There is much discussion in the dental literature regarding the superiority of one impression technique over the other using addition silicone impression material. However, there is inadequate information available on the accuracy of different impression techniques using polyether. The purpose of this study was to assess the linear dimensional accuracy of four impression techniques using polyether on a laboratory model that simulates clinical practice. The impression material used was Impregum Soft™, 3 M ESPE and the four impression techniques used were (1) Monophase impression technique using medium body impression material. (2) One step double mix impression technique using heavy body and light body impression materials simultaneously. (3) Two step double mix impression technique using a cellophane spacer (heavy body material used as a preliminary impression to create a wash space with a cellophane spacer, followed by the use of light body material). (4) Matrix impression using a matrix of polyether occlusal registration material. The matrix is loaded with heavy body material followed by a pick-up impression in medium body material. For each technique, thirty impressions were made of a stainless steel master model that contained three complete crown abutment preparations, which were used as the positive control. Accuracy was assessed by measuring eight dimensions (mesiodistal, faciolingual and inter-abutment) on stone dies poured from impressions of the master model. A two-tailed t test was carried out to test the significance in difference of the distances between the master model and the stone models. One way analysis of variance (ANOVA) was used for multiple group comparison followed by the Bonferroni's test for pair wise comparison. The accuracy was tested at α = 0.05. In general, polyether impression material produced stone dies that were smaller except for the dies produced from the one step double mix impression technique. The ANOVA revealed a highly significant difference for each dimension measured (except for the inter-abutment distance between the first and the second die) between any two groups of stone models obtained from the four impression techniques. Pair wise comparison for each measurement did not reveal any significant difference (except for the faciolingual distance of the third die) between the casts produced using the two step double mix impression technique and the matrix impression system. The two step double mix impression technique produced stone dies that showed the least dimensional variation. During fabrication of a cast restoration, laboratory procedures should not only compensate for the cement thickness, but also for the increase or decrease in die dimensions.

Learning French as a Second Official Language in Canada: Comparing Monolingual and Bilingual Students at Grade 6

ERIC Educational Resources Information Center

Mady, Callie

2014-01-01

This paper presents the results of a study that compared the French as a second official achievement of three groups of students: (1) Canadian-born English speaking (CBE), (2) Canadian-born multilingual (CBM), and (3) immigrant multilinguals (IMM) as determined by multiskills test results. ANOVAs and subsequent post hoc tests revealed that the…

The Effects of Non-Normality on Type III Error for Comparing Independent Means

ERIC Educational Resources Information Center

Mendes, Mehmet

2007-01-01

The major objective of this study was to investigate the effects of non-normality on Type III error rates for ANOVA F its three commonly recommended parametric counterparts namely Welch, Brown-Forsythe, and Alexander-Govern test. Therefore these tests were compared in terms of Type III error rates across the variety of population distributions,…

Recognizing the Signs and Symptoms of Youth and Adolescents That Experience Mental Health Problems and/or Crises

ERIC Educational Resources Information Center

Pritchett, Tierra M.

2017-01-01

Health First Aid at the Philadelphia Red Cross completed a survey with information pertaining to knowledge and confidence in recognizing the signs and symptoms of youth/adolescents that may be experiencing a mental health problem and or crisis. Descriptive statistics, independent t-tests, ANOVA, and Tukey tests were conducted to investigate the…

Color stability of CAD/CAM Zirconia ceramics following exposure to acidic and staining drinks

PubMed Central

Colombo, Marco; Cavallo, Marco; Miegge, Matteo; Dagna, Alberto; Beltrami, Riccardo; Chiesa, Marco

2017-01-01

Background The aim of this in vitro study was to evaluate the color stability of CAD/CAM Zirconia ceramics following exposure to acidic drink (Coca Cola) and after exposure to staining solution (coffee). Material and Methods All the samples were immersed in different staining solutions over a 28-day test period. A colorimetric evaluation according to the CIE L*a*b* system was performed by a blind trained operator at 7, 14, 21, 28 days of the staining process. Shapiro Wilk test and Kruskal-Wallis ANOVA were applied to assess significant differences among restorative materials. Paired t-test was applied to test which CIE L*a*b* parameters significantly changed after immersion in staining solutions. Results One week immersion in acidic drink did not cause a perceivable discoloration for all restorative materials (ΔE < 3.3). Subsequent immersion in coffee affected color stability of all Zirconia samples, even if Kruskal-Wallis ANOVA found significant differences among the various restorative materials. Conclusions The ∆Es of CAD/CAM Zirconia ceramics after immersion in coffee varied among the products, but color integrity is not affected by contact with acidic drinks. Key words:CAD/CAM restorative materials, CIE Lab, Zirconia ceramics. PMID:29302281

Color stability of CAD/CAM Zirconia ceramics following exposure to acidic and staining drinks.

PubMed

Colombo, Marco; Cavallo, Marco; Miegge, Matteo; Dagna, Alberto; Beltrami, Riccardo; Chiesa, Marco; Poggio, Claudio

2017-11-01

The aim of this in vitro study was to evaluate the color stability of CAD/CAM Zirconia ceramics following exposure to acidic drink (Coca Cola) and after exposure to staining solution (coffee). All the samples were immersed in different staining solutions over a 28-day test period. A colorimetric evaluation according to the CIE L*a*b* system was performed by a blind trained operator at 7, 14, 21, 28 days of the staining process. Shapiro Wilk test and Kruskal-Wallis ANOVA were applied to assess significant differences among restorative materials. Paired t-test was applied to test which CIE L*a*b* parameters significantly changed after immersion in staining solutions. One week immersion in acidic drink did not cause a perceivable discoloration for all restorative materials (ΔE < 3.3). Subsequent immersion in coffee affected color stability of all Zirconia samples, even if Kruskal-Wallis ANOVA found significant differences among the various restorative materials. The ∆Es of CAD/CAM Zirconia ceramics after immersion in coffee varied among the products, but color integrity is not affected by contact with acidic drinks. Key words: CAD/CAM restorative materials, CIE Lab, Zirconia ceramics.

An approach to optimize sample preparation for MALDI imaging MS of FFPE sections using fractional factorial design of experiments.

PubMed

Oetjen, Janina; Lachmund, Delf; Palmer, Andrew; Alexandrov, Theodore; Becker, Michael; Boskamp, Tobias; Maass, Peter

2016-09-01

A standardized workflow for matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI imaging MS) is a prerequisite for the routine use of this promising technology in clinical applications. We present an approach to develop standard operating procedures for MALDI imaging MS sample preparation of formalin-fixed and paraffin-embedded (FFPE) tissue sections based on a novel quantitative measure of dataset quality. To cover many parts of the complex workflow and simultaneously test several parameters, experiments were planned according to a fractional factorial design of experiments (DoE). The effect of ten different experiment parameters was investigated in two distinct DoE sets, each consisting of eight experiments. FFPE rat brain sections were used as standard material because of low biological variance. The mean peak intensity and a recently proposed spatial complexity measure were calculated for a list of 26 predefined peptides obtained by in silico digestion of five different proteins and served as quality criteria. A five-way analysis of variance (ANOVA) was applied on the final scores to retrieve a ranking of experiment parameters with increasing impact on data variance. Graphical abstract MALDI imaging experiments were planned according to fractional factorial design of experiments for the parameters under study. Selected peptide images were evaluated by the chosen quality metric (structure and intensity for a given peak list), and the calculated values were used as an input for the ANOVA. The parameters with the highest impact on the quality were deduced and SOPs recommended.

Validity of the Special Needs Education Assessment Tool (SNEAT), a Newly Developed Scale for Children with Disabilities.

PubMed

Kohara, Aiko; Han, ChangWan; Kwon, HaeJin; Kohzuki, Masahiro

2015-11-01

The improvement of the quality of life (QOL) of children with disabilities has been considered important. Therefore, the Special Needs Education Assessment Tool (SNEAT) was developed based on the concept of QOL to objectively evaluate the educational outcome of children with disabilities. SNEAT consists of 11 items in three domains: physical functioning, mental health, and social functioning. This study aimed to verify the reliability and construct validity of SNEAT using 93 children collected from the classes on independent activities of daily living for children with disabilities in Okinawa Prefecture between October and November 2014. Survey data were collected in a longitudinal prospective cohort study. The reliability of SNEAT was verified via the internal consistency method and the test-pretest method; both the coefficient of Cronbach's α and the intra-class correlation coefficient were over 0.7. The validity of SNEAT was also verified via one-way repeated-measures ANOVA and the latent growth curve model. The scores of all the items and domains and the total scores obtained from one-way repeated-measures ANOVA were the same as the predicted scores. SNEAT is valid based on its goodness-of-fit values obtained using the latent growth curve model, where the values of comparative fit index (0.983) and root mean square error of approximation (0.062) were within the goodness-of-fit range. These results indicate that SNEAT has high reliability and construct validity and may contribute to improve QOL of children with disabilities in the classes on independent activities of daily living for children with disabilities.

Population differences in the postcrania of modern South Africans and the implications for ancestry estimation.

PubMed

Liebenberg, Leandi; L'Abbé, Ericka N; Stull, Kyra E

2015-12-01

The cranium is widely recognized as the most important skeletal element to use when evaluating population differences and estimating ancestry. However, the cranium is not always intact or available for analysis, which emphasizes the need for postcranial alternatives. The purpose of this study was to quantify postcraniometric differences among South Africans that can be used to estimate ancestry. Thirty-nine standard measurements from 11 postcranial bones were collected from 360 modern black, white and coloured South Africans; the sex and ancestry distribution were equal. Group differences were explored with analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD) test. Linear and flexible discriminant analysis (LDA and FDA, respectively) were conducted with bone models as well as numerous multivariate subsets to identify the model and method that yielded the highest correct classifications. Leave-one-out (LDA) and k-fold (k=10; FDA) cross-validation with equal priors were used for all models. ANOVA and Tukey's HSD results reveal statistically significant differences between at least two of the three groups for the majority of the variables, with varying degrees of group overlap. Bone models, which consisted of all measurements per bone, resulted in low accuracies that ranged from 46% to 63% (LDA) and 41% to 66% (FDA). In contrast, the multivariate subsets, which consisted of different variable combinations from all elements, achieved accuracies as high as 85% (LDA) and 87% (FDA). Thus, when using a multivariate approach, the postcranial skeleton can distinguish among three modern South African groups with high accuracy. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Mental health literacy, stigma, and help-seeking behaviors among male college students.

PubMed

Rafal, Gregor; Gatto, Amy; DeBate, Rita

2018-01-01

Mental health literacy (MHL) is low in college-aged men potentially resulting in impaired mental wellbeing. This study assessed MHL, psychosocial determinants, and help-seeking behaviors among male university students. Male undergraduate and graduate students were surveyed in Spring 2017 (n = 1,242) at a large southeastern university in the United States. Preexisting validated scales for MHL, psychosocial determinants, and help-seeking intention were used in measurement and demographic variables were collected. T-tests and one-way ANOVA were performed to measure differences between groups. Participants showed low scores for all constructs with statistically significant differences between undergraduate and graduate students, as well as between races and major classifications. Undergraduate men had moderate MHL and low intentions to seek professional care. Interventions focusing on increasing mental health knowledge and improving beliefs can improve MHL among male college students. Further, interventions should be tailored for racial groups and major classifications.

Critical shear stress measurement of cohesive soils in streams: identifying device-dependent variability using an in-situ jet test device and conduit flume

NASA Astrophysics Data System (ADS)

Mahalder, B.; Schwartz, J. S.; Palomino, A.; Papanicolaou, T.

2016-12-01

Cohesive soil erodibility and threshold shear stress for stream bed and bank are dependent on both soil physical and geochemical properties in association with the channel vegetative conditions. These properties can be spatially variable therefore making critical shear stress measurement in cohesive soil challenging and leads to a need for a more comprehensive understanding of the erosional processes in streams. Several in-situ and flume-type test devices for estimating critical shear stress have been introduced by different researchers; however reported shear stress estimates per device vary widely in orders of magnitude. Advantages and disadvantages exist between these devices. Development of in-situ test devices leave the bed and/or bank material relatively undisturbed and can capture the variable nature of field soil conditions. However, laboratory flumes provide a means to control environmental conditions that can be quantify and tested. This study was conducted to observe differences in critical shear stress using jet tester and a well-controlled conduit flume. Soil samples were collected from the jet test locations and tested in a pressurized flume following standard operational procedure to calculate the critical shear stress. The results were compared using statistical data analysis (mean-separation ANOVA procedure) to identify possible differences. In addition to the device comparison, the mini jet device was used to measure critical shear stress across geologically diverse regions of Tennessee, USA. Statistical correlation between critical shear stress and the soil physical, and geochemical properties were completed identifying that geological origin plays a significant role in critical shear stress prediction for cohesive soils. Finally, the critical shear stress prediction equations using the jet test data were examined with possible suggestions to modify based on the flume test results.

Effect of chewing gums on the production of volatile sulfur compounds (VSC) in vivo.

PubMed

Rösing, Cassiano K; Gomes, Sabrina C; Bassani, Diego G; Oppermann, Rui V

2009-01-01

The aim of the present study was to evaluate the effect of two chewing gums on the production of volatile sulfur-containing compounds (VSC) in vivo. Fourteen periodontally healthy participants (20-35 years old) were included in the test panel. Test gum 1 (TG1) contained sucrose and Test gum 2 (TG2) contained xylitol and zinc citrate. Two series of tests were conducted with a double-blind cross-over design. Following an overnight refrain from oral hygiene, VSC was measured before and at 5, 15, 30, 45 and 60 minutes of chewing the test gums. In the second series, VSC production was monitored prior to and up to 30 minutes after a rinse with cysteine 6 mM alone or after a rinse followed by chewing the test gums. For the first test, the results were analyzed by repeated measurements ANOVA for intra-group and paired sample t test for intergroup comparisons. In the second series, percent reduction of VSC was compared by Friedman and Wilcoxon tests (p < .05). The test gums did not differ in terms of VSC production, with values ranging from 146 ppb after 5 minutes to 86 ppb after 60 minutes. Similar reductions in VSC production following cysteine were observed for both test gums, with the largest reductions (71% to 52%) observed after 5 and 15 minutes. It can be concluded that VSC production is diminished after chewing gum and that the use of chewing gums reduces temporarily the VSC production enhanced by cysteine rinses.

Plasma Chemokine signature correlates with lung goblet cell hyperplasia in smokers with and without chronic obstructive pulmonary disease.

PubMed

Kim, Victor; Cornwell, William D; Oros, Michelle; Durra, Heba; Criner, Gerard J; Rogers, Thomas J

2015-09-30

Chronic Obstructive Pulmonary Disease (COPD) is characterized by lung and systemic inflammation as well as airway goblet cell hyperplasia (GCH). Mucin production is activated in part by stimulation of the epidermal growth factor (EGF) receptor pathway through neutrophils and macrophages. How circulating cytokine levels relate to GCH is not clear. We performed phlebotomy and bronchoscopy on 25 subjects (six nonsmokers, 11 healthy smokers, and eight COPD subjects FEV1 30-60 %). Six endobronchial biopsies per subject were performed. GCH was measured by measuring mucin volume density (MVD) using stereological techniques on periodic acid fast-Schiff stained samples. We measured the levels of chemokines CXCL8/IL-8, CCL2/MCP-1, CCL7/MCP-3, CCL22/MCD, CCL3/MIP-1α, and CCL4/MIP-1β, and the cytokines IL-1, IL-4, IL-6, IL-9, IL-17, EGF, and vascular endothelial growth factor (VEGF). Differences between groups were assessed using one-way ANOVA, t test, or Chi squared test. Post hoc tests after ANOVA were performed using Bonferroni correction. MVD was highest in healthy smokers (27.78 ± 10.24 μL/mm(2)) compared to COPD subjects (16.82 ± 16.29 μL/mm(2), p = 0.216) and nonsmokers (3.42 ± 3.07 μL/mm(2), p < 0.0001). Plasma CXCL8 was highest in healthy smokers (11.05 ± 8.92 pg/mL) compared to nonsmokers (1.20 ± 21.92 pg/mL, p = 0.047) and COPD subjects (6.01 ± 5.90 pg/mL, p = 0.366). CCL22 and CCL4 followed the same trends. There were no significant differences in the other cytokines measured. When the subjects were divided into current smokers (healthy smokers and COPD current smokers) and non/ex-smokers (nonsmokers and COPD ex-smokers), plasma CXCL8, CCL22, CCL4, and MVD were greater in current smokers. No differences in other cytokines were seen. Plasma CXCL8 moderately correlated with MVD (r = 0.552, p = 0.003). In this small cohort, circulating levels of the chemokines CXCL8, CCL4, and CCL22, as well as MVD, attain the highest levels in healthy smokers compared to nonsmokers and COPD subjects. These findings seem to be driven by current smoking and are independent of airflow obstruction. These data suggest that smoking upregulates a systemic pattern of neutrophil and macrophage chemoattractant expression, and this correlates significantly with the development of goblet cell hyperplasia.

Effect of Alternate Nostril Breathing Exercise on Experimentally Induced Anxiety in Healthy Volunteers Using the Simulated Public Speaking Model: A Randomized Controlled Pilot Study.

PubMed

Kamath, Ashwin; Urval, Rathnakar P; Shenoy, Ashok K

2017-01-01

A randomized controlled pilot study was carried out to determine the effect of a 15-minute practice of ANB exercise on experimentally induced anxiety using the simulated public speaking model in yoga-naïve healthy young adults. Thirty consenting medical students were equally divided into test and control groups. The test group performed alternate nostril breathing exercise for 15 minutes, while the control group sat in a quiet room before participating in the simulated public speaking test (SPST). Visual Analog Mood Scale and Self-Statements during Public Speaking scale were used to measure the mood state at different phases of the SPST. The psychometric scores of both groups were comparable at baseline. Repeated-measures ANOVA showed a significant effect of phase ( p < 0.05), but group and gender did not have statistically significant influence on the mean anxiety scores. However, the test group showed a trend towards lower mean scores for the anxiety factor when compared with the control group. Considering the limitations of this pilot study and the trend seen towards lower anxiety in the test group, alternate nostril breathing may have potential anxiolytic effect in acute stressful situations. A study with larger sample size is therefore warranted. This trial is registered with CTRI/2014/03/004460.

Effect of Alternate Nostril Breathing Exercise on Experimentally Induced Anxiety in Healthy Volunteers Using the Simulated Public Speaking Model: A Randomized Controlled Pilot Study

PubMed Central

Urval, Rathnakar P.; Shenoy, Ashok K.

2017-01-01

A randomized controlled pilot study was carried out to determine the effect of a 15-minute practice of ANB exercise on experimentally induced anxiety using the simulated public speaking model in yoga-naïve healthy young adults. Thirty consenting medical students were equally divided into test and control groups. The test group performed alternate nostril breathing exercise for 15 minutes, while the control group sat in a quiet room before participating in the simulated public speaking test (SPST). Visual Analog Mood Scale and Self-Statements during Public Speaking scale were used to measure the mood state at different phases of the SPST. The psychometric scores of both groups were comparable at baseline. Repeated-measures ANOVA showed a significant effect of phase (p < 0.05), but group and gender did not have statistically significant influence on the mean anxiety scores. However, the test group showed a trend towards lower mean scores for the anxiety factor when compared with the control group. Considering the limitations of this pilot study and the trend seen towards lower anxiety in the test group, alternate nostril breathing may have potential anxiolytic effect in acute stressful situations. A study with larger sample size is therefore warranted. This trial is registered with CTRI/2014/03/004460. PMID:29159176

Performance-based alternative assessments as a means of eliminating gender achievement differences on science tests

NASA Astrophysics Data System (ADS)

Brown, Norman Merrill

1998-09-01

Historically, researchers have reported an achievement difference between females and males on standardized science tests. These differences have been reported to be based upon science knowledge, abstract reasoning skills, mathematical abilities, and cultural and social phenomena. This research was designed to determine how mastery of specific science content from public school curricula might be evaluated with performance-based assessment models, without producing gender achievement differences. The assessment instruments used were Harcourt Brace Educational Measurement's GOALSsp°ler: A Performance-Based Measure of Achievement and the performance-based portion of the Stanford Achievement Testspcopyright, Ninth Edition. The identified independent variables were test, gender, ethnicity, and grade level. A 2 x 2 x 6 x 12 (test x gender x ethnicity x grade) factorial experimental design was used to organize the data. A stratified random sample (N = 2400) was selected from a national pool of norming data: N = 1200 from the GOALSsp°ler group and N = 1200 from the SAT9spcopyright group. The ANOVA analysis yielded mixed results. The factors of test, gender, ethnicity by grade, gender by grade, and gender by grade by ethnicity failed to produce significant results (alpha = 0.05). The factors yielding significant results were ethnicity, grade, and ethnicity by grade. Therefore, no significant differences were found between female and male achievement on these performance-based assessments.

Design and evaluation of interprofessional cross-cultural communication sessions.

PubMed

Liu, Min; Poirier, Therese; Butler, Lakesha; Comrie, Rhonda; Pailden, Junvie

2015-01-01

The 2013 National Standards for Culturally and Linguistically Appropriate Services (CLAS) call for healthcare professionals to provide quality care and services that are responsive to diverse cultural health beliefs and practices. Accreditation organizations for health professional programs require their curriculum to adequately prepare future practitioners for serving culturally and linguistically diverse populations. Another common curricular need of health professional programs is interprofessional education (IPE). This study presents data that evaluates two IPE culturally competent communication sessions designed for pharmacy and nursing students. Teams of nursing and pharmacy students (n = 160) engaged in case studies focused on developing cross-cultural communication skills, using the LEARN model. Quantitative survey data collected pre-test and post-test measured cultural competency (including subscales of perceived skills, perceived knowledge, confidence in encounter, and attitude) and knowledge related to culturally competent communication. Univariate ANOVA results indicate that actual knowledge as measured by the test and all four Clinical Cultural Competency Questionnaire (CCCQ) subscales significantly increased after the IPE sessions. Pharmacy students scored higher than nursing students on the knowledge pre-test, and nursing students had a more positive attitude at pre-test. The IPE sessions effectively addressed all learning outcomes and will continue in future course offerings. Using cross-cultural communication as a thematic area for IPE program development resulted in educational benefits for the students. To further strengthen nursing and pharmacy students' interprofessional practice, additional IPE opportunities are to be explored.

Effects of Group-Focused Cognitive-Behavioral Coaching Program on Depressive Symptoms in a Sample of Inmates in a Nigerian Prison.

PubMed

Eseadi, Chiedu; Obidoa, Mabel A; Ogbuabor, Shulamite E; Ikechukwu-Ilomuanya, Amaka B

2018-05-01

This study investigated the effects that a group-focused cognitive-behavioral coaching program had on depressive symptoms of a sample of inmates from Nsukka Prisons, Enugu State, Nigeria. The design of the study was pretest-posttest control group . The participants were 30 male inmates, experiencing high levels of depressive symptoms, and randomly assigned to treatment and control groups. The primary outcome measure was depression symptoms as measured using Beck's Depression Inventory. Repeated-measures ANOVA and the Mann-Whitney U Test were used for data analysis. Results show that exposing inmates to the group-focused cognitive-behavioral coaching program significantly reduced the depressive symptoms of inmates in the treatment group compared with those in the control group. Our results support the use of cognitive-behavioral coaching interventions designed to assist the severely depressed inmates in Nigeria. Further studies should be conducted both in other states of Nigeria and in other countries.

Tensile bond strength of veneering resins to PEEK: impact of different adhesives.

PubMed

Stawarczyk, Bogna; Keul, Christine; Beuer, Florian; Roos, Malgorzata; Schmidlin, Patrick R

2013-01-01

This study tested tensile bond strength (TBS) between veneering resins and polyetheretherketone (PEEK) after pre-treatment with adhesive systems. Five-hundred-seventy-six PEEK disks were fabricated, air-abraded and divided into six pre-treatment groups (n=96/group): Z-Prime Plus, Ambarino P60, Monobond Plus, Visio.link, Signum PEEK Bond, and control group without pre-treatment. Each group was divided into three subgroups of different veneering resins (n=32): Sinfony, GC Gradia and VITA VM LC. After specimen preparation with a bond area of 6.6 mm(2), half of each subgroup (n=16) was tested initially, and the other half was thermo-cycled. TBS measurements were analysed by three-way and one-way ANOVA, t-test and Weibull statistics. Groups without pre-treatment and groups pre-treated by Z-Prime Plus and Ambarino P60 showed no TBS. Pre-treatment with Monobond Plus increased the TBS values. The highest TBS before and after thermo-cycling between PEEK and all tested veneering resins was observed for groups pre-treated with Visio.link and Signum PEEK Bond.

[Effectiveness of the Military Mental Health Promotion Program].

PubMed

Woo, Chung Hee; Kim, Sun Ah

2014-12-01

This study was done to evaluate the Military Mental Health Promotion Program. The program was an email based cognitive behavioral intervention. The research design was a quasi-experimental study with a non-equivalent control group pretest-posttest design. Participants were 32 soldiers who agreed to participate in the program. Data were collected at three different times from January 2012 to March 2012; pre-test, post-test, and a one-month follow-up test. The data were statistically analyzed using SPSS 18.0. The effectiveness of the program was tested by repeated measures ANOVA. The first hypothesis that the level of depression in the experimental group who participated in the program would decrease compared to the control group was not supported in that the difference in group-time interaction was not statistically significant (F=2.19, p=.121). The second and third hypothesis related to anxiety and self-esteem were supported in group-time interaction, respectively (F=7.41, p=.001, F=11.67, p<.001). Results indicate that the program is effective in improving soldiers' mental health status in areas of anxiety and self-esteem.

[Development and effects of emotional intelligence program for undergraduate nursing students: mixed methods research].

PubMed

Lee, Oi Sun; Gu, Mee Ock

2014-12-01

This study was conducted to develop and test the effects of an emotional intelligence program for undergraduate nursing students. The study design was a mixed method research. Participants were 36 nursing students (intervention group: 17, control group: 19). The emotional intelligence program was provided for 4 weeks (8 sessions, 20 hours). Data were collected between August 6 and October 4, 2013. Quantitative data were analyzed using Chi-square, Fisher's exact test, t-test, repeated measure ANOVA, and paired t-test with SPSS/WIN 18.0. Qualitative data were analyzed using content analysis. Quantitative results showed that emotional intelligence, communication skills, resilience, stress coping strategy, and clinical competence were significantly better in the experimental group compared to the control group. According to the qualitative results, the nursing students experienced improvement in emotional intelligence, interpersonal relationships, and empowerment, as well as a reduction in clinical practice stress after participation in the emotional intelligence program. Study findings indicate that the emotional intelligence program for undergraduate nursing students is effective and can be recommended as an intervention for improving the clinical competence of undergraduate students in a nursing curriculum.

Effects of air-polishing powders on color stability of composite resins.

PubMed

Güler, Ahmet Umut; Duran, Ibrahim; Yücel, Ali Çağin; Ozkan, Pelin

2011-10-01

The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex). The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C) and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder). A standard air-polishing unit (ProSmile Handly) was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic) for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300). Color differences (∆E*) between the 2 color measurements (baseline and after 24 h storage) were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p<0.05). According to the 2-way ANOVA results, composite resin restorative materials, air-polishing powders, and their interaction were statistically significant (p<0.05) For Aelite Aesthetic Enemal, Filtek Z250, Grandio, CeramX Mono, and Quixfil composite resin restorative materials, no significant difference was observed between Group-PS and Group-CP (p>.05) and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7). Air-polishing applications increased the color change for all composite resin restorative materials tested. Composite restorations may require re-polishing after air-polishing.

Effects of air-polishing powders on color stability of composite resins

PubMed Central

GÜLER, Ahmet Umut; DURAN, Ibrahim; YÜCEL, Ali Çagin; ÖZKAN, Pelin

2011-01-01

Objectives The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. Material and methods Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex). The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C) and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder). A standard air-polishing unit (ProSmile Handly) was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90º. Specimens were stored in 100 mL of coffee (Nescafe Classic) for 24 h at 37ºC. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300). Color differences (∆E*) between the 2 color measurements (baseline and after 24 h storage) were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p≤0.05). Results According to the 2-way ANOVA results, composite resin restorative materials, air-polishing powders, and their interaction were statistically significant (p<0.05) For Aelite Aesthetic Enemal, Filtek Z250, Grandio, CeramX Mono, and Quixfil composite resin restorative materials, no significant difference was observed between Group-PS and Group-CP (p>.05) and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. Conclusion Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7). Air-polishing applications increased the color change for all composite resin restorative materials tested. Composite restorations may require re-polishing after air-polishing. PMID:21922122

EFFECT OF A ROAD SAFETY EDUCATION INTERVENTION ON ROAD SAFETY KNOWLEDGE OF UNIVERSITY DRIVERS IN IBADAN, NIGERIA.

PubMed

Olumide, A O; Owoaje, E T

2016-06-01

It is essential for drivers employed in the formal sector to have good knowledge of road safety in order to safeguard their lives and those of the staff they are employed to drive. The study was conducted to determine the effect of a road safety education intervention on road safety knowledge of drivers employed in the University of Ibadan, Nigeria. A quasi-experimental study of 98 intervention and 78 control drivers selected using a cluster sampling technique was conducted. The intervention comprised a two-day training on road safety and first aid. The drivers' knowledge of road safety was measured at baseline, immediately and 4-months post-intervention. Aggregate scores of road safety knowledge were computed giving minimum and maximum obtainable scores of 0 and 16 respectively. Change in mean scores over the three measurement periods was assessed using Repeated Measures Analysis of Variance (ANOVA). Independent t-test was used to compare the scores between intervention and control drivers at each of the assessment periods. Twenty-nine drivers did not complete the study (attrition rate = 16.5%). At baseline, mean road safety knowledge scores for the intervention and control drivers were 12.7±2.2 and 12.9± 2.3 (p = 0.510) respectively. Immediately and four months post intervention, the scores of the intervention drivers were 13.8±1.9 and 12.8±1.6; while scores for the controls were 13.3±2.0 and 13.2±1.8. Repeated measures ANOVA revealed that the increase in knowledge over the three assessment periods was not statistically significant. The intervention resulted in an initial increase in road safety knowledge of the intervention drivers. However, this was not sustained to the forth month post-intervention. This finding suggests periodic refresher trainings to sustain the knowledge acquired.

Recent advances in analysis of differential item functioning in health research using the Rasch model.

PubMed

Hagquist, Curt; Andrich, David

2017-09-19

Rasch analysis with a focus on Differential Item Functioning (DIF) is increasingly used for examination of psychometric properties of health outcome measures. To take account of DIF in order to retain precision of measurement, split of DIF-items into separate sample specific items has become a frequently used technique. The purpose of the paper is to present and summarise recent advances of analysis of DIF in a unified methodology. In particular, the paper focuses on the use of analysis of variance (ANOVA) as a method to simultaneously detect uniform and non-uniform DIF, the need to distinguish between real and artificial DIF and the trade-off between reliability and validity. An illustrative example from health research is used to demonstrate how DIF, in this case between genders, can be identified, quantified and under specific circumstances accounted for using the Rasch model. Rasch analyses of DIF were conducted of a composite measure of psychosomatic problems using Swedish data from the Health Behaviour in School-aged Children study for grade 9 students collected during the 1985-2014 time periods. The procedures demonstrate how DIF can be identified efficiently by ANOVA of residuals, and how the magnitude of DIF can be quantified and potentially accounted for by resolving items according to identifiable groups and using principles of test equating on the resolved items. The results of the analysis also show that the real DIF in some items does affect person measurement estimates. Firstly, in order to distinguish between real and artificial DIF, the items showing DIF initially should not be resolved simultaneously but sequentially. Secondly, while resolving instead of deleting a DIF item may retain reliability, both options may affect the content validity negatively. Resolving items with DIF is not justified if the source of the DIF is relevant for the content of the variable; then resolving DIF may deteriorate the validity of the instrument. Generally, decisions on resolving items to deal with DIF should also rely on external information.

Effect of water storage on the translucency of silorane-based and dimethacrylate-based composite resins with fibres.

PubMed

Ozakar Ilday, Nurcan; Celik, Neslihan; Bayindir, Yusuf Ziya; Seven, Nilgün

2014-06-01

The purposes of this study were (1) to determine the translucency of silorane and dimethacrylate-based composite resins and (2) to evaluate the effect of water storage and reinforcement with fibre on the translucency of composite resins. Two light-cured composite resins (A2 shade), Filtek Silorane (silorane-based composite) and Valux Plus (dimethacrylate-based composite), were used in this study. The first group was used as the control with no reinforcements, the second was reinforced with polyethylene (Ribbond THM) and the third was reinforced with a glass fibre (Everstick Net) for each composite resin. Colour measurements were measured against white and black backgrounds with a Shadepilot (Degu Dent Gmbh, Hanau, Germany) spectrophotometer and recorded under a D65 light source, which reflects daylight. CIELAB parameters of each specimen were recorded at baseline and at 24 h, 168 h and 504 h. Translucency of materials was calculated using the translucency parameter (TP) formula. Data were analyzed using repeated measures ANOVA and LSD post hoc tests (α=0.05). The highest baseline TP value was in the Valux Plus/non-fibre reinforced group (14.06±1) and the lowest in the Filtek Silorane/Ribond THM group (8.98±1.11). Repeated measures ANOVA revealed significant effects from the factors storage time, composite resin, composite resin×storage time and fibre×time (p=0.047; p=0.001; p=0.013; p=0.022, respectively). Within the limitations of the study, we concluded that inclusion of polyethylene and glass fibres did not alter the translucency of the different-based composite resins. The longest storage time resulted in the greatest change in translucency values of Filtek Silorane composite resins. Considering the translucencies of composites with different formulations in the selection of composite resins for aesthetic restorations is important in terms of obtaining optimal aesthetic outcomes. Copyright © 2014 Elsevier Ltd. All rights reserved.

Zinc Finger Transcription Factors as Novel Genetic Switches to Modulate Metastatic Progression of Breast Tumors

DTIC Science & Technology

2008-05-01

critical level of significance set up at P < 0.05, and significant differences between groups of treatments were analyzed with post hoc Turkish test ...2008 differences between groups of treatments were analyzed with post hoc Turkish test . As shown in Fig. 2A, particular ATFs synergized with chromatin...using ANOVA test and the post hoc Turkish test ; critical level of significance was set up at P < 0.05. B, real- time expression analysis of maspin mRNA

Assessment of Pulp Oxygen Saturation Levels by Pulse Oximetry for Pulpal Diseases -A Diagnostic Study.

PubMed

Anusha, Bander; Madhusudhana, Koppolu; Chinni, Suneel Kumar; Paramesh, Yelloji

2017-09-01

Diagnosis of pulpal inflammation is a key to endodontics. Pulse oximetry is a true vitality testing device which relies on oxygen saturation levels of pulp and helps in diagnosis of different pulpal conditions. The aim of the study was to analyse oxygen saturation levels of different pulpally inflamed teeth by using pulse oximetry. Hundred patients were included in the study and categorized into five groups based on pulpal status of the test tooth by using heat test and cold test. Twenty patients were recruited in each of the experimental groups i.e., Reversible Pulpitis (RP), Irreversible Pulpitis (IP), Pulpal Necrosis (PN), Positive Control (PC, healthy teeth), and Negative Control (NC, endodontically treated teeth). Oxygen saturation levels of all the groups were measured along with each patient index finger oxygen saturation readings. Results were analysed by using ANOVA and Tukey HSD tests. The mean oxygen saturation levels of RP, IP, PN, PC and NC were 85.4%, 81.6%, 70.7%, 94.6% and 0 respectively. There was significant difference in the oxygen saturation levels between all the groups. Pulse oximeter is an effective tool in diagnosing different pulpal pathologies especially PN which was interpreted inaccurately by thermal tests.

The impact of sample non-normality on ANOVA and alternative methods.

PubMed

Lantz, Björn

2013-05-01

In this journal, Zimmerman (2004, 2011) has discussed preliminary tests that researchers often use to choose an appropriate method for comparing locations when the assumption of normality is doubtful. The conceptual problem with this approach is that such a two-stage process makes both the power and the significance of the entire procedure uncertain, as type I and type II errors are possible at both stages. A type I error at the first stage, for example, will obviously increase the probability of a type II error at the second stage. Based on the idea of Schmider et al. (2010), which proposes that simulated sets of sample data be ranked with respect to their degree of normality, this paper investigates the relationship between population non-normality and sample non-normality with respect to the performance of the ANOVA, Brown-Forsythe test, Welch test, and Kruskal-Wallis test when used with different distributions, sample sizes, and effect sizes. The overall conclusion is that the Kruskal-Wallis test is considerably less sensitive to the degree of sample normality when populations are distinctly non-normal and should therefore be the primary tool used to compare locations when it is known that populations are not at least approximately normal. © 2012 The British Psychological Society.

Color stability and degree of cure of direct composite restoratives after accelerated aging.

PubMed

Sarafianou, Aspasia; Iosifidou, Soultana; Papadopoulos, Triantafillos; Eliades, George

2007-01-01

This study evaluated the color changes and amount of remaining C = C bonds (%RDB) in three dental composites after hydrothermal- and photoaging. The materials tested were Estelite sigma, Filtek Supreme and Tetric Ceram. Specimens were fabricated from each material and subjected to L* a* b* colorimetry and FTIR spectroscopy before and after aging. Statistical evaluation of the deltaL,* deltaa,* deltab,* deltaE and %deltaRDB data was performed by one-way ANOVA and Tukey's test. The %RDB data before and after aging were statistically analyzed using two-way ANOVA and Student-Newman-Keuls test. In all cases an alpha = 0.05 significance level was used. No statistically significant differences were found in deltaL*, deltaa*, deltaE and %deltaRDB among the materials tested. Tetric Ceram demonstrated a significant difference in deltab*. All the materials showed visually perceptible (deltaE >1) but clinically acceptable values (deltaE < 3.3). Within each material group, statistically significant differences in %RDB were noticed before and after aging (p < 0.05). Filtek Supreme presented the lowest %RDB before aging, with Tetric Ceram presenting the lowest %RDB after aging (p < 0.05). The %deltaRDB mean values were statistically significantly different among all the groups tested. No correlation was found between deltaE and %deltaRDB.

Data and material of the Safe-Range-Inventory: An assistance tool helping to improve the charging infrastructure for electric vehicles.

PubMed

Carbon, Claus-Christian; Gebauer, Fabian

2017-10-01

The Safe-Range-Inventory (SRI) was constructed in order to help public authorities to improve the charging infrastructures for electric vehicles [1; 10.1016/j.trf.2017.04.011]. Specifically, the impact of fast (vs slow) charging stations on people's range anxiety was examined. Ninety-seven electric vehicle users from Germany (81 male; M age =46.3 years, SD =12.1) were recruited to participate in the experimental design. Statistical analyses were conducted using ANOVA for repeated measures to test for interaction effects of available charging stations and remaining range with the dependent variable range anxiety . The full data set is publicly available via https://osf.io/bveyw/ (Carbon and Gebauer, 2017) [2].

Sagittal and vertical load-deflection and permanent deformation of transpalatal arches connected with palatal implants: an in-vitro study.

PubMed

Crismani, Adriano G; Celar, Ales G; Burstone, Charles J; Bernhart, Thomas G; Bantleon, Hans-Peter; Mittlboeck, Martina

2007-06-01

The purposes of this laboratory investigation were to (1) measure the sagittal and vertical deflection of loaded transpalatal arches (TPAs) connected to a palatal implant, (2) measure the extent of permanent deformation of the connecting TPA in the sagittal and vertical directions, (3) test various wire dimensions in terms of deflection behavior, and (4) evaluate soldering vs laser welding vs adhesive bonding of TPAs in terms of load deflection behavior. Stainless steel wires of 6 dimensions were tested: 0.8 x 0.8, 0.9, 1, 1.1, 1.2, and 1.2 x 1.2 mm. For each dimension, 10 specimens were soldered to the palatal implant abutment, 10 were laser welded, and 10 were adhesively bonded to the implant abutment (total, 180 specimens). The measuring device applied increments of force of 50 cN, from 0 to 500 cN. Then the specimens were unloaded. The values were statistically described and analyzed with ANOVA and Wilcoxon rank sum tests. Absolute orthodontic anchorage without deformation of TPAs was not observed with the wire dimensions tested. To prevent loss of anchorage greater than 370 mum (sagittal deflection of 1.2 x 1.2 mm adhesively bonded TPA at 500 cN force level), wires thicker than 1.2 x 1.2 mm or cast anchorage elements must be considered for clinical practice. However, larger cross sections might cause more patient discomfort, and laboratory procedures increase costs.

Intra-instrument reliability of 4 goniometers.

PubMed

Pringle, R Kevin

2003-01-01

Cervical spine ROM movements taken accurately with reliable measuring devices are important in outcome measures as well as in measuring disability. To compare the active cervical spine ROM in healthy young adult population using 4 different goniometers. Subjects were tested during active cervical spine ROM. The devices were a single hinge inclinometer, single bubble carpenter's inclinometer, dual bubble goniometers and Cybex EDI 320 electrical inclinometer. All subjects were tested for rotational limits along each of the orthogonal axes of movement. There are 3 trials for each movement direction, except rotation was not measured with the Cybex as per manual suggestions. The subjects were randomly assigned to the sequence of devices. Twenty-seven student volunteers (19 men and 8 women) were tested. Ages ranged from 21 to 41, mean age of 27.6 years of age. Active cervical spine ROM trials for each measurement was used to calculate mean and standard deviation. An overall analysis of variance (ANOVA) and Bonferroni adjusted T-test were determined in order to calculate reliability and significance. The cost of the instruments were not used in determining reliability or significance. The single hinge inclinometer was found to be a reliable measure but not likely valid. The Cybex EDI 320 was found to be the best measuring device; however, the 2 instruments whose cost were in-between the single hinge inclinometer and the electrical goniometer were just as reliable as the more expensive device. The AMA Guides of Impairment were used as the normative data to compare these devices. Since the devices could measure reliably, whether expensive or more cost effective for students they would likely make adequate devices for training students on the methods for measuring ROM. There is previous data to suggest that older populations have gender differences and age differences with ROM. This study could not measure that and would make a useful follow-up study.

Indentation fracture toughness and dynamic elastic moduli for commercial feldspathic dental porcelain materials.

PubMed

Rizkalla, Amin S; Jones, Derek W

2004-02-01

The purpose of this study was to evaluate and compare the indentation fracture toughness, true hardness and dynamic elastic moduli for 14 commercial dental porcelain materials. The specimens were fired according to manufacturer instructions. The density of the specimens (n=3) was measured by means of the water displacement technique. Dynamic Young's shear and bulk moduli and Poisson's ratio (n=3) were measured using a non-destructive ultrasonic technique using 10 MHz lithium niobate crystals. The true hardness (n=3) was measured using a Knoop indenter and the fracture toughness (n=3) was determined using a Vickers indenter and a Tukon hardness tester. Statistical analysis of the data was conducted using ANOVA and a Student-Newman-Keuls (SNK) rank order multiple comparative test. The SNK rank test analysis for the mean dynamic Young's modulus and fracture toughness was able to separate 14 dental porcelain materials into seven and nine groups, respectively, at p=0.05. The elastic moduli, true hardness and indentation fracture toughness for opaque porcelains were significantly higher than incisal; and body materials at p=0.05. The indentation fracture toughness and the ultrasonic test methods exhibit lower coefficient of variation compared to conventional methods and have considerable advantage for ceramic dental materials in that only small specimens are required to produce an acceptable number of data for statistical analysis.

Validation of spinal motion with the spine reposition sense device

PubMed Central

Petersen, Cheryl M; Rundquist, Peter J

2009-01-01

Background A sagittal plane spine reposition sense device (SRSD) has been developed. Two questions were addressed with this study concerning the new SRSD: 1) whether spine movement was occurring with the methodology, and 2) where movement was taking place. Methods Sixty-five subjects performed seven trials of repositioning to a two-thirds full flexion position in sitting with X and Y displacement measurements taken at the T4 and L3 levels. The thoracolumbar angle between the T4 and the L3 level was computed and compared between the positions tested. A two (vertebral level of thoracic and lumbar) by seven (trials) mixed model repeated measures ANOVA indicated whether significant differences were present between the thoracic (T4) and lumbar (L3) angular measurements. Results Calculated thoracolumbar angles between T4 and L3 were significantly different for all positions tested indicating spinal movement was occurring with testing. No interactions were found between the seven trials and the two vertebral levels. No significant findings were found between the seven trials but significant differences were found between the two vertebral levels. Conclusion This study indicated spine motion was taking place with the SRSD methodology and movement was found specific to the lumbar spine. These findings support utilizing the SRSD to evaluate changes in spine reposition sense during future intervention studies dealing with low back pain. PMID:19386126

Comparison the effects of two types of therapeutic exercises Frenkele vs. Swiss ball on the clinical balance measures in patients with type II diabetic neuropathy.

PubMed

Rojhani-Shirazi, Zahra; Barzintaj, Fatemeh; Salimifard, Mohamad Reza

2017-11-01

The number of diabetic patients is increasing in the world. Peripheral neuropathy is the most important problem of diabetes. Neuropathy eventually leads to balance impairment which is the main cause of falling down in these patients However, not sufficient evidences available to compare different protocols for improving balance in diabetic patients. This study aimed to compare the effects of two therapeutic exercises on clinical balance measures in patients with type II diabetic peripheral neuropathy. The study was performed on 60 patients with diabetes categorized randomly into three groups: an intervention group (N=20) that received ball training exercise, another intervention group (N=20) that received Frenkel exercise and a control group (N=20) that received no interventions. Exercise training session was performed for 3 weeks. Then, clinical balance measures were computed in the three groups. Paired t-test and one-way ANOVA were used to analyze the collected data. Both types of therapeutic exercise programs significantly improved balance in single leg stance, star excursion test, and Berg balance scale test (P˂0.05) compared to the control group. Besides, this was more significant in the ball training group (P˂0.05). To improve balance in diabetic neuropathy, Swiss ball exercise is preferred compared to Frenkel training. Copyright © 2016. Published by Elsevier Ltd.

A New Weak Chelator in Endodontics: Effects of Different Irrigation Regimens with Etidronate on Root Dentin Microhardness

PubMed Central

Tartari, Talita; de Almeida Rodrigues Silva e Souza, Patrícia; Vila Nova de Almeida, Bruno; Carrera Silva Júnior, José Otávio; Facíola Pessoa, Oscar; Silva e Souza Junior, Mario Honorato

2013-01-01

This study investigated the effect of sodium hypochlorite (NaOCl), ethylenediaminetetraacetic (EDTA), etidronic (HEBP), and citric acid (CA) associated in different irrigation regimens on root dentin microhardness. Forty-five root halves of single-rooted teeth were sectioned into thirds that were embedded in acrylic resin, polished, randomly assigned into 3 groups, and treated as follows: G1: saline solution; G2: 5% NaOCl + 18% HEBP, mixed in equal parts; and G3: 2.5% NaOCl. After measurements, the G3 samples were distributed into subgroups G4, G5, and G6, which were submitted to 17% EDTA, 10% CA and 9% HEBP, respectively. Following the new measurements, these groups received a final flush with 2.5% NaOCl, producing G7, G8, and G9. Microhardness was measured with Knoop indenter under a 25 g load for 15 seconds, before and after treatments. The data were statistically analyzed using paired Student's t-test (α<0.05) to compare values before and after treatments and analysis of variance (ANOVA) (α<0.05) to detect any differences among thirds. Except G1, all tested irrigation regimens significantly decreased the microhardness. There were no differences between root thirds before treatments, and all root thirds exhibited equal responses to same treatment. Except saline, all tested irrigation regimens reduced the root dentin microhardness. PMID:23983692

Adolescent Perceptions of Parenting Styles in Sweden, Italy and Greece: An Exploratory Study

PubMed Central

Olivari, Maria Giulia; Hertfelt Wahn, Elisabeth; Maridaki-Kassotaki, Katerina; Antonopoulou, Katerina; Confalonieri, Emanuela

2015-01-01

Comparative research on parenting styles among Nordic and Mediterranean countries is still missing, despite the increasing number of studies on parenting styles in adolescence. This study explores similarities and differences in adolescents’ retrospective perceptions of parenting styles, for both parents, in Sweden, Italy and Greece, using the Parenting Styles and Dimensions Questionnaire. In particular, it examines the relation between parental role, adolescent gender, country of origin, SES and these perceptions. Swedish, Italian and Greek adolescents (N = 702; 30.9% Swedish, 39.6% Italian and 29.5% Greek) participated in the study. To test the principal effects three mixed 2(parent; mother and father)*2(gender; girl and boy)*3(countries; Sweden, Italy and Greece)*3(SES; low, medium and high) ANOVAs were conducted separately for each parenting style. To verify the interaction effects, a mixed 2(parent; mother and father)*3(countries; Sweden, Italy and Greece)*3(SES; low, medium and high) ANOVA was tested on authoritative style. Regarding authoritarian and permissive two mixed 2(parent; mother and father)*2(gender; girl and boy)*3(countries; Sweden, Italy and Greece) ANOVAs were tested. Mothers, as compared to fathers, were perceived as more authoritative, authoritarian and permissive. Moreover, boys perceived their parents as more authoritarian and more permissive than girls. Swedish parents were perceived as significantly less authoritarian than Italian and Greek parents and more permissive than Italian parents; Greek parents were perceived as less authoritarian and more permissive than Italian parents. The study provides an interesting contribution to parenting styles literature, showing how country legislation concerning family matters and SES are related the perception of parenting behaviours. PMID:27247655

Adolescent Perceptions of Parenting Styles in Sweden, Italy and Greece: An Exploratory Study.

PubMed

Olivari, Maria Giulia; Hertfelt Wahn, Elisabeth; Maridaki-Kassotaki, Katerina; Antonopoulou, Katerina; Confalonieri, Emanuela

2015-05-01

Comparative research on parenting styles among Nordic and Mediterranean countries is still missing, despite the increasing number of studies on parenting styles in adolescence. This study explores similarities and differences in adolescents' retrospective perceptions of parenting styles, for both parents, in Sweden, Italy and Greece, using the Parenting Styles and Dimensions Questionnaire. In particular, it examines the relation between parental role, adolescent gender, country of origin, SES and these perceptions. Swedish, Italian and Greek adolescents (N = 702; 30.9% Swedish, 39.6% Italian and 29.5% Greek) participated in the study. To test the principal effects three mixed 2(parent; mother and father)*2(gender; girl and boy)*3(countries; Sweden, Italy and Greece)*3(SES; low, medium and high) ANOVAs were conducted separately for each parenting style. To verify the interaction effects, a mixed 2(parent; mother and father)*3(countries; Sweden, Italy and Greece)*3(SES; low, medium and high) ANOVA was tested on authoritative style. Regarding authoritarian and permissive two mixed 2(parent; mother and father)*2(gender; girl and boy)*3(countries; Sweden, Italy and Greece) ANOVAs were tested. Mothers, as compared to fathers, were perceived as more authoritative, authoritarian and permissive. Moreover, boys perceived their parents as more authoritarian and more permissive than girls. Swedish parents were perceived as significantly less authoritarian than Italian and Greek parents and more permissive than Italian parents; Greek parents were perceived as less authoritarian and more permissive than Italian parents. The study provides an interesting contribution to parenting styles literature, showing how country legislation concerning family matters and SES are related the perception of parenting behaviours.

INNOVATIVE INSTRUMENTATION AND ANALYSIS OF THE TEMPERATURE MEASUREMENT FOR HIGH TEMPERATURE GASIFICATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seong W. Lee

During this reporting period, the literature survey including the gasifier temperature measurement literature, the ultrasonic application and its background study in cleaning application, and spray coating process are completed. The gasifier simulator (cold model) testing has been successfully conducted. Four factors (blower voltage, ultrasonic application, injection time intervals, particle weight) were considered as significant factors that affect the temperature measurement. The Analysis of Variance (ANOVA) was applied to analyze the test data. The analysis shows that all four factors are significant to the temperature measurements in the gasifier simulator (cold model). The regression analysis for the case with the normalizedmore » room temperature shows that linear model fits the temperature data with 82% accuracy (18% error). The regression analysis for the case without the normalized room temperature shows 72.5% accuracy (27.5% error). The nonlinear regression analysis indicates a better fit than that of the linear regression. The nonlinear regression model's accuracy is 88.7% (11.3% error) for normalized room temperature case, which is better than the linear regression analysis. The hot model thermocouple sleeve design and fabrication are completed. The gasifier simulator (hot model) design and the fabrication are completed. The system tests of the gasifier simulator (hot model) have been conducted and some modifications have been made. Based on the system tests and results analysis, the gasifier simulator (hot model) has met the proposed design requirement and the ready for system test. The ultrasonic cleaning method is under evaluation and will be further studied for the gasifier simulator (hot model) application. The progress of this project has been on schedule.« less

Chronotype influences activity circadian rhythm and sleep: differences in sleep quality between weekdays and weekend.

PubMed

Vitale, Jacopo A; Roveda, Eliana; Montaruli, Angela; Galasso, Letizia; Weydahl, Andi; Caumo, Andrea; Carandente, Franca

2015-04-01

Several studies have shown the differences among chronotypes in the circadian rhythm of different physiological variables. Individuals show variation in their preference for the daily timing of activity; additionally, there is an association between chronotype and sleep duration/sleep complaints. Few studies have investigated sleep quality during the week days and weekends in relation to the circadian typology using self-assessment questionnaires or actigraphy. The purpose of this study was to use actigraphy to assess the relationship between the three chronotypes and the circadian rhythm of activity levels and to determine whether sleep parameters respond differently with respect to time (weekdays versus the weekend) in Morning-types (M-types), Neither-types (N-types) and Evening-types (E-types). The morningness-eveningness questionnaire (MEQ) was administered to 502 college students to determine their chronotypes. Fifty subjects (16 M-types, 15 N-types and 19 E-types) were recruited to undergo a 7-days monitoring period with an actigraph (Actiwacth® actometers, CNT, Cambridge, UK) to evaluate their sleep parameters and the circadian rhythm of their activity levels. To compare the amplitude and the acrophase among the three chronotypes, we used a one-way ANOVA followed by the Tukey-Kramer post-hoc test. To compare the Midline Estimating Statistic of Rhythm (MESOR) among the three chronotypes, we used a Kruskal-Wallis non-parametric test followed by pairwise comparisons that were performed using Dunn's procedure with a Bonferroni correction for multiple comparisons. The analysis of each sleep parameter was conducted using the mixed ANOVA procedure. The results showed that the chronotype was influenced by sex (χ(2) with p = 0.011) and the photoperiod at birth (χ(2) with p < 0.05). Though the MESOR and amplitude of the activity levels were not different among the three chronotypes, the acrophases compared by the ANOVA post-hoc test were significantly different (p < 0.001). The ANOVA post-hoc test revealed the presence of a significant difference (p < 0.001) between the M-types (14:32 h) and E-types (16:53 h). There was also a significant interaction between the chronotype and four sleep parameters: Sleep end, Assumed Sleep, Immobility Time and Sleep Efficiency. Sleep Efficiency showed the same patterns as did Assumed Sleep and Immobility Time: the Sleep Efficiency of the E-types was poorer than that of the M- and N-types during weekdays (77.9% ± 7.0 versus 84.1% ± 4.9 and 84.1% ± 5.2) but was similar to that measured in the M- and N-types during the weekend. Sleep Latency and Movement and Fragmentation Index were not different among the three chronotypes and did not change on the weekend compared with weekdays. This study highlights two key findings: first, we observed that the circadian rhythm of activity levels was influenced by the chronotype; second, the chronotype had a significant effect on sleep parameters: the E-types had a reduced sleep quality and quantity compared with the M- and N-types during weekdays, whereas the E-types reached the same levels as the other chronotypes during the weekends. These findings suggest that E-types accumulate a sleep deficit during weekdays due to social and academic commitments and that they recover from this deficit during "free days" on the weekend.

Power and Sample Size Calculations for Testing Linear Combinations of Group Means under Variance Heterogeneity with Applications to Meta and Moderation Analyses

ERIC Educational Resources Information Center

Shieh, Gwowen; Jan, Show-Li

2015-01-01

The general formulation of a linear combination of population means permits a wide range of research questions to be tested within the context of ANOVA. However, it has been stressed in many research areas that the homogeneous variances assumption is frequently violated. To accommodate the heterogeneity of variance structure, the…

Approximate Sample Size Formulas for Testing Group Mean Differences when Variances Are Unequal in One-Way ANOVA

ERIC Educational Resources Information Center

Guo, Jiin-Huarng; Luh, Wei-Ming

2008-01-01

This study proposes an approach for determining appropriate sample size for Welch's F test when unequal variances are expected. Given a certain maximum deviation in population means and using the quantile of F and t distributions, there is no need to specify a noncentrality parameter and it is easy to estimate the approximate sample size needed…

Shore hardness and tensile bond strength of long-term soft denture lining materials.

PubMed

Kim, Bong-Jun; Yang, Hong-So; Chun, Min-Geoung; Park, Yeong-Joon

2014-11-01

Reduced softness and separation from the denture base are the most significant problems of long-term soft lining materials. The purpose of this study was to evaluate the durometer Shore A hardness and tensile bond strength of long-term soft denture lining materials and to investigate the correlation between these 2 properties. A group of 7 soft lining materials, 6 silicone based (Dentusil, GC Reline Soft, GC Reline Ultrasoft, Mucopren Soft, Mucosoft, Sofreliner Tough) and 1 acrylic resin based (Durabase), were evaluated for durometer Shore A hardness and tensile bond strength to heat-polymerized denture base resin (Lucitone 199). A specially designed split mold and loading assembly with a swivel connector were used for the durometer Shore A hardness test and tensile bond strength test to improve accuracy and facilitate measurement. Three specimens of each product were stored in a 37°C water bath, and durometer Shore A hardness tests were carried out after 24 hours and 28 days. A tensile bond strength test was carried out for 10 specimens of each product, which were stored in a 37°C water bath for 24 hours before the test. Repeated-measures ANOVA, the Kruskal-Wallis and Duncan multiple range tests, and the Spearman correlation were used for statistical analyses. The repeated-measures ANOVA found significant durometer Shore A hardness differences for the materials (P<.001) and the interaction effect (aging×materials) (P<.001). GC Reline Ultrasoft showed the lowest mean durometer Shore A hardness (21.30 ±0.29 for 24 hours, 34.73 ±0.47 for 28 days), and GC Reline Soft showed the highest mean durometer Shore A hardness (50.13 ±0.48 for 24 hours, 57.20 ±0.28 for 28 days). The Kruskal-Wallis test found a significant difference in the mean tensile bond strength values (P<.001). GC Reline Ultrasoft (0.82 ±0.32 MPa) and Mucopren Soft (0.96 ±0.46 MPa) had a significantly lower mean tensile bond strength (P<.05). GC Reline Soft had the highest mean tensile bond strength (2.99 ±0.43 MPa) (P<.05), and acrylic resin-based Durabase showed a significantly different tensile bond strength (1.32 ±0.16 MPa), except for Mucopren Soft, among the materials (P<.05). The tensile bond strength and Shore A hardness showed a statistically insignificant moderate positive correlation (r=0.571, P=.180 for Shore A hardness 24 hours versus tensile bond strength; r=0.607, P=.148 for Shore A hardness 28 days versus tensile bond strength). Within the limitations of this study, significant differences were found in durometer Shore A hardness (with aging time) and tensile bond strength among the materials. Adhesive failure was moderately correlated with durometer Shore A hardness, especially after 28 days, but was not significant. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Effect of stimulus configuration on crowding in strabismic amblyopia.

PubMed

Norgett, Yvonne; Siderov, John

2017-11-01

Foveal vision in strabismic amblyopia can show increased levels of crowding, akin to typical peripheral vision. Target-flanker similarity and visual-acuity test configuration may cause the magnitude of crowding to vary in strabismic amblyopia. We used custom-designed visual acuity tests to investigate crowding in observers with strabismic amblyopia. LogMAR was measured monocularly in both eyes of 11 adults with strabismic or mixed strabismic/anisometropic amblyopia using custom-designed letter tests. The tests used single-letter and linear formats with either bar or letter flankers to introduce crowding. Tests were presented monocularly on a high-resolution display at a test distance of 4 m, using standardized instructions. For each condition, five letters of each size were shown; testing continued until three letters of a given size were named incorrectly. Uncrowded logMAR was subtracted from logMAR in each of the crowded tests to highlight the crowding effect. Repeated-measures ANOVA showed that letter flankers and linear presentation individually resulted in poorer performance in the amblyopic eyes (respectively, mean normalized logMAR = 0.29, SE = 0.07, mean normalized logMAR = 0.27, SE = 0.07; p < 0.05) and together had an additive effect (mean = 0.42, SE = 0.09, p < 0.001). There was no difference across the tests in the fellow eyes (p > 0.05). Both linear presentation and letter rather than bar flankers increase crowding in the amblyopic eyes of people with strabismic amblyopia. These results suggest the influence of more than one mechanism contributing to crowding in linear visual-acuity charts with letter flankers.

The insertion torque-depth curve integral as a measure of implant primary stability: An in vitro study on polyurethane foam blocks.

PubMed

Di Stefano, Danilo Alessio; Arosio, Paolo; Gastaldi, Giorgio; Gherlone, Enrico

2017-07-08

Recent research has shown that dynamic parameters correlate with insertion energy-that is, the total work needed to place an implant into its site-might convey more reliable information concerning immediate implant primary stability at insertion than the commonly used insertion torque (IT), the reverse torque (RT), or the implant stability quotient (ISQ). Yet knowledge on these dynamic parameters is still limited. The purpose of this in vitro study was to evaluate whether an energy-related parameter, the torque-depth curve integral (I), could be a reliable measure of primary stability. This was done by assessing if (I) measurement was operator-independent, by investigating its correlation with other known primary stability parameters (IT, RT, or ISQ) by quantifying the (I) average error and correlating (I), IT, RT, and ISQ variations with bone density. Five operators placed 200 implants in polyurethane foam blocks of different densities using a micromotor that calculated the (I) during implant placement. Primary implant stability was assessed by measuring the ISQ, IT, and RT. ANOVA tests were used to evaluate whether measurements were operator independent (P>.05 in all cases). A correlation analysis was performed between (I) and IT, ISQ, and RT. The (I) average error was calculated and compared with that of the other parameters by ANOVA. (I)-density, IT-density, ISQ-density, and RT-density plots were drawn, and their slopes were compared by ANCOVA. The (I) measurements were operator independent and correlated with IT, ISQ, and RT. The average error of these parameters was not significantly different (P>.05 in all cases). The (I)-density, IT-density, ISQ-density, and RT-density curves were linear in the 0.16 to 0.49 g/cm³ range, with the (I)-density curves having a significantly greater slope than those regarding the other parameters (P≤.001 in all cases). The torque-depth curve integral (I) provides a reliable assessment of primary stability and shows a greater sensitivity to density variations than other known primary stability parameters. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Idalopirdine, a selective 5-HT6 receptor antagonist, reduces food intake and body weight in a model of excessive eating.

PubMed

Kotańska, Magdalena; Lustyk, Klaudia; Bucki, Adam; Marcinkowska, Monika; Śniecikowska, Joanna; Kołaczkowski, Marcin

2018-06-01

Obesity, from early childhood onwards, is a common societal problem. The overconsumption of sweet, salty and high-fat products are the main factors that cause excessive weight gain. It is therefore necessary to search for new drugs that affect satiety centers and reduce the sense of hunger and caloric intake. It has been suggested that the blockade of 5-HT 6 receptors may reduce food intake, and since idalopirdine is a clinically tested, selective 5HT 6 receptor antagonist, it was chosen to be examined in animal models of obesity. The activity of idalopirdine was measured in the rat model of excessive eating. Animals were on a high caloric diet that consisted of milk chocolate with nuts, cheese, salted peanuts and condensed milk. During a four-week experiment, the rats had constant access to standard feed and water ad libitum. Idalopirdine was administered intraperitoneally at a dose 5 mg/kg b.w./day. To establish whether idalopirdine would effectively suppress the rebound hyperphagia that accompanies refeeding, it was administered after a 20 h food deprivation period. Pica behavior was evaluated after the administration of idalopirdine to confirm that the suppression of food intake was not caused by visceral illness. The effect of the four-week treatment with idalopirdine on the amount of peritoneal adipose tissue, and on lipid and carbohydrate profiles in rats was also examined. The statistical significance was calculated using the one-way ANOVA post-hoc Tukey Multiple Comparison Test or the two-way ANOVA post-hoc Bonferroni Multiple Comparison Test. Idalopirdine significantly reduced caloric intake and prevented the development of obesity in tested animals. Rats, that received idalopirdine, had a smaller amount of adipose tissue in the peritoneum as well as lower glucose, triglyceride and cholesterol levels in comparison to the control group. Moreover, an anorectic action was not caused by abnormalities of the gastrointestinal tract, such as nausea. The obtained results indicate that idalopirdine reduces caloric intake and could be considered for further tests as a potential treatment of obesity.

Assessment of medical students’ learning and study strategies in self-regulated learning

PubMed Central

JOUHARI, ZAHRA; HAGHANI, FARIBA; CHANGIZ, TAHEREH

2016-01-01

Introduction Research on medical students shows that adopting self-regulation of effort, time, and study strategies can positively influence academic achievement. The purpose of the current study was to assess learning and study strategies in medical students. Methods This cross-sectional study was carried out in 2014-2015 at Isfahan University of Medical Sciences. The sample size was determined 360 students based on the results of a pilot study on 30 members of the study population. Medical students in the first to fourth year of their studies were selected through simple sampling randomly. A valid and reliable Persian translation of Learning and Study Strategies Inventory (LASSI) questionnaire was completed by the students. It measures three latent factors of self-regulated learning: Skill, Will, and Self-Regulation. It consists of 80 questions in ten different scales (each scale including eight questions and a variable score of 8-40). Data were analyzed using t-test, correlation analysis, and ANOVA. Results Considering the ten LASSI scales, the highest mean score belonged to test strategies (28.67±4.44), and the lowest mean to self-testing (21.91±4.91). The results showed significant statistical differences between male and female students in selecting the main idea, attitude, and self-testing. ANOVA and post hoc Tukey tests showed a significant difference between the mean scores of different areas of LASSI among students with different grade point average (GPA) in the university. In all areas except the study aids, the mean scores of students with GPA higher than 17.5 were significantly higher than those of students with GPA lower than 14.5. Conclusion The results showed that students need help and consultation in most areas of learning and study strategies. Using 10 areas of LASSI can determine the strengths and weaknesses of students in various areas. Knowing their own limitations, students will be able to improve their study habits. Hence, it is suggested to evaluate the students when enrolling at universities and design educational programs based on the students’ characteristics. PMID:27104201

Evaluation of effect of galvanic corrosion between nickel-chromium metal and titanium on ion release and cell toxicity

PubMed Central

Choi, Jung-Yun

2015-01-01

PURPOSE The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens (10×10×1.5 mm) were fabricated using commercial pure titanium and 3 different types of Ni-Cr alloys (T3, Tilite, Bella bond plus) commonly used for metal ceramic restorations. The specimens were divided into 6 groups according to the composition of Ni-Cr alloy and contact with titanium. The experimental groups were in direct contact with titanium and the control groups were not. After the samples were immersed in the culture medium - Dulbecco's modified Eagle's medium[DMEM] for 48 hours, the released metal ions were detected using inductively coupled plasma mass spectrometer (ICP-MS) and analyzed by the Kruskal-Wallis and Mann-Whitney test (P<.05). Mouse L-929 fibroblast cells were used for cell toxicity evaluation. The cell toxicity of specimens was measured by the 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyltetrazolium bromide (MTT) test. Results of MTT assay were statistically analyzed by the two-way ANOVA test (P<.05). Post-hoc multiple comparisons were conducted using Tukey's tests. RESULTS The amount of metal ions released by galvanic corrosion due to contact between the base metal alloy and titanium was increased in all of the specimens. In the cytotoxicity test, the two-way ANOVA showed a significant effect of the alloy type and galvanic corrosion for cytotoxicity (P<.001). The relative cell growth rate (RGR) was decreased further on the groups in contact with titanium (P<.05). CONCLUSION The release of metal ions was increased by galvanic corrosion due to contact between base metal and titanium, and it can cause adverse effects on the tissue around the implant by inducing cytotoxicity. PMID:25932317

An ANOVA approach for statistical comparisons of brain networks.

PubMed

Fraiman, Daniel; Fraiman, Ricardo

2018-03-16

The study of brain networks has developed extensively over the last couple of decades. By contrast, techniques for the statistical analysis of these networks are less developed. In this paper, we focus on the statistical comparison of brain networks in a nonparametric framework and discuss the associated detection and identification problems. We tested network differences between groups with an analysis of variance (ANOVA) test we developed specifically for networks. We also propose and analyse the behaviour of a new statistical procedure designed to identify different subnetworks. As an example, we show the application of this tool in resting-state fMRI data obtained from the Human Connectome Project. We identify, among other variables, that the amount of sleep the days before the scan is a relevant variable that must be controlled. Finally, we discuss the potential bias in neuroimaging findings that is generated by some behavioural and brain structure variables. Our method can also be applied to other kind of networks such as protein interaction networks, gene networks or social networks.

Extraction of coffee silverskin to convert waste into a source of antioxidant

NASA Astrophysics Data System (ADS)

Tangguh, Patrick; Kusumocahyo, Samuel P.

2017-01-01

Coffee silverskin (CS) is a thin layer of coffee bean, and is regarded as a waste during coffee roasting process. In this work, coffee silverskin was extracted by three types of method: conventional extraction (CE) with agitation, conventional extraction (CE) without agitation and ultrasound-assisted extraction (UAE). The total phenolic content, the total flavonoid content and the antioxidant activity of the extract were analyzed. It was found that the type of extraction method, the extraction time and the extraction temperature strongly influenced the total phenolic content, the total flavonoid content and the antioxidant activity of the extract. Comparison between conventional extraction (CE) and ultrasound-assisted extraction (UAE) were statistically analyzed using 3-way ANOVA test. The optimum extraction time and temperature for each method were analyzed using 2-way ANOVA test. It was found that the optimum condition to obtain a high antioxidant activity of 68.9% was by using CE with agitation with the extraction time and temperature of 60 minutes and 60˚C, respectively.

E-WOM Review Adoption: Consumers’ Demographic Profile Influence on Green Purchase Intention

NASA Astrophysics Data System (ADS)

Rahim, Roslin Abdul; Sulaiman, Zuraidah; Chin, Thoo Ai; Arif, Mohd Shoki Mohd; Hamid, Mohd Hakim Abdul

2017-06-01

Nowadays, green products are getting popular in their acceptance by the Malaysian consumers. Due to the advancement of the Internet technologies and the wide spread of electronic word of mouth (E-WOM), consumers seem to be more influenced in purchasing the green products. In this study, consumers’ demographic profiles, such as age, gender, income, education background, and occupation are being explored to investigate their influences on consumers’ green product purchase intention. The purpose of this paper is to showcase the results of the differences between several demographic profile groups on green product purchase intention using descriptive analysis, ANOVA and independent sample T-Test. T-test results showed that there is a statistically significant difference between gender on consumers’ green product purchase intention. Meanwhile, the results generated by ANOVA indicated that there are no significant differences between age, income, education background and occupation on consumers’ green product purchase intention. These results shed light on the potential market segment that should be targeted by marketers and producers of green products in Malaysia.

Silica coating on alumina ceramic: comparison of three chairside air-abrasion devices working for different times and distances.

PubMed

Pestana Passos, S; Dias Vanderlei, A; Ozcan, M; Felipe Valandro, L F; Felipe Valandro, L

2011-03-01

This study evaluated, by scanning electron microscope (SEM) and EDS, the effect of different strategies for silica coating (sandblasters, time and distance) of a glass-infiltrated ceramic (In-Ceram Alumina). Forty-one ceramic blocks were produced. For comparison of the three air-abrasion devices, 15 ceramic samples were divided in three groups (N.=5): Bioart, Microetcher and Ronvig (air-abrasion parameters: 20 s at a distance of 10 mm). For evaluation of the time and distance factors, ceramic samples (N.=5) were allocated in groups considering three applied times (5 s, 13 s and 20 s) and two distances (10 mm and 20 mm), using the Ronvig device. In a control sample, no surface treatment was performed. After that, the micro-morphologic analyzes of the ceramic surfaces were made using SEM. EDS analyzes were carried out to detect the % of silica on representative ceramic surface. ANOVA and Tukey tests were used to analyze the results. One-way ANOVA showed the silica deposition was different for different devices (P=0.0054). The Ronvig device promoted the highest silica coating compared to the other devices (Tukey test). Two-way ANOVA showed the distance and time factors did not affect significantly the silica deposition (application time and distance showed no statistical difference). The Ronvig device provided the most effective silica deposition on glass-infiltrated alumina ceramic surface and the studied time and distance for air-abrasion did not affect the silica coating.

Test-retest reliability of quantitative sensory testing for mechanical somatosensory and pain modulation assessment of masticatory structures.

PubMed

Costa, Y M; Morita-Neto, O; de Araújo-Júnior, E N S; Sampaio, F A; Conti, P C R; Bonjardim, L R

2017-03-01

Assessing the reliability of medical measurements is a crucial step towards the elaboration of an applicable clinical instrument. There are few studies that evaluate the reliability of somatosensory assessment and pain modulation of masticatory structures. This study estimated the test-retest reliability, that is over time, of the mechanical somatosensory assessment of anterior temporalis, masseter and temporomandibular joint (TMJ) and the conditioned pain modulation (CPM) using the anterior temporalis as the test site. Twenty healthy women were evaluated in two sessions (1 week apart) by the same examiner. Mechanical detection threshold (MDT), mechanical pain threshold (MPT), wind-up ratio (WUR) and pressure pain threshold (PPT) were assessed on the skin overlying the anterior temporalis, masseter and TMJ of the dominant side. CPM was tested by comparing PPT before and during the hand immersion in a hot water bath. anova and intra-class correlation coefficients (ICCs) were applied to the data (α = 5%). The overall ICCs showed acceptable values for the test-retest reliability of mechanical somatosensory assessment of masticatory structures. The ICC values of 75% of all quantitative sensory measurements were considered fair to excellent (fair = 8·4%, good = 33·3% and excellent = 33·3%). However, the CPM paradigm presented poor reliability (ICC = 0·25). The mechanical somatosensory assessment of the masticatory structures, but not the proposed CPM protocol, can be considered sufficiently reliable over time to evaluate the trigeminal sensory function. © 2016 John Wiley & Sons Ltd.

Effect of Toothpaste Application Prior to Dental Bleaching on Whitening Effectiveness and Enamel Properties.

PubMed

Vieira-Junior, W F; Lima, D A N L; Tabchoury, C P M; Ambrosano, G M B; Aguiar, F H B; Lovadino, J R

2016-01-01

The purpose of this study was to investigate the effects on the enamel properties and effectiveness of bleaching using 35% hydrogen peroxide (HP) when applying toothpastes with different active agents prior to dental bleaching. Seventy enamel blocks (4 × 4 × 2 mm) were submitted to in vitro treatment protocols in a tooth-brushing machine (n=10): with distilled water and exposure to placebo gel (negative control [NC]) or HP bleaching (positive control [PC]); and brushing with differing toothpastes prior to HP bleaching, including potassium nitrate toothpaste (PN) containing NaF, conventional sodium monofluorophosphate toothpaste (FT), arginine-based toothpastes (PA and SAN), or a toothpaste containing bioactive glass (NM). Color changes were determined using the CIE L*a*b* system (ΔE, ΔL, Δa, and Δb), and a roughness (Ra) analysis was performed before and after treatments. Surface microhardness (SMH) and cross-sectional microhardness (CSMH) were analyzed after treatment. Data were analyzed with repeated measures ANOVA for Ra, one-way ANOVA (SMH, ΔE, ΔL, Δa, and Δb), split-plot ANOVA (CSMH), and Tukey post hoc test (α<0.05). The relationship between the physical surface properties and color properties was evaluated using a multivariate Canonical correlation analysis. Color changes were statistically similar in the bleached groups. After treatments, SMH and CSMH decreased in PC. SMH increased significantly in the toothpaste groups vs the negative and positive control (NM > PA = SAN > all other groups) or decreased HP effects (CSMH). Ra increased in all bleached groups, with the exception of NM, which did not differ from the NC. The variation in the color variables (ΔL, Δa, and Δb) explained 21% of the variation in the physical surface variables (Ra and SMH). The application of toothpaste prior to dental bleaching did not interfere with the effectiveness of treatment. The bioactive glass based toothpaste protected the enamel against the deleterious effects of dental bleaching.

Medial-to-lateral Ratio of Tibiofemoral Subchondral Bone Area is Adapted to Alignment and Mechanical Load

PubMed Central

Eckstein, Felix; Hudelmaier, Martin; Cahue, September; Marshall, Meredith; Sharma, Leena

2010-01-01

Malalignment is known to impact the medial-to-lateral load distribution in the tibiofemoral joint. In this longitudinal study, we test the hypothesis that subchondral bone surface areas functionally adapt to the load distribution in malaligned knees. Alignment (hip-knee-ankle angle) was measured from full limb films in 174 participants with knee osteoarthritis. Coronal MR images were acquired at baseline and 26.6±5.4 months later. The subchondral bone surface area of the weight-bearing tibiofemoral cartilages was segmented, with readers blinded to the order of acquisition. The size of the subchondral bone surface areas was computed after triangulation using proprietary software. The hip-knee-ankle angle showed a significant correlation with the tibial (r2=0.25, p<0.0001) and femoral (r2=0.07, p<0.001) ratio of medial-to-lateral subchondral bone surface area. In the tibia, the ratio was significantly different between varus (1.28:1), neutral (1.18:1) and valgus (1.13:1) knees (ANOVA; p<0.00001). Similar observations were made in the weight-bearing femur (0.94:1 in neutral, 0.97.1 in varus, 0.91:1 in valgus knees; ANOVA p=0.018). The annualized longitudinal increase in subchondral bone surface area was significant (p<0.05) in the medial tibia (+0.13%), medial femur (+0.26%) and lateral tibia (+0.19%). In the medial femur, the change between baseline and follow-up was significantly different (ANOVA; p=0.020) between neutral, varus and valgus knees, the increase in surface area being significantly greater (p=0.019) in varus than in neutral knees. Tibiofemoral subchondral bone surface areas are shown to be functionally adapted to the medial-to-lateral load distribution. The longitudinal findings indicate that this adaptational process may continue to take place at advanced age. PMID:19148562

Global proteome profiling of dental cementum under experimentally-induced apposition.

PubMed

Salmon, Cristiane R; Giorgetti, Ana Paula O; Paes Leme, Adriana Franco; Domingues, Romênia R; Sallum, Enilson Antonio; Alves, Marcelo C; Kolli, Tamara N; Foster, Brian L; Nociti, Francisco H

2016-06-01

Dental cementum (DC) covers the tooth root and has important functions in tooth attachment and position. DC can be lost to disease, and regeneration is currently unpredictable due to limited understanding of DC formation. This study used a model of experimentally-induced apposition (EIA) in mice to identify proteins associated with new DC formation. Mandibular first molars were induced to super-erupt for 6 and 21days after extracting opposing maxillary molars. Decalcified and formalin-fixed paraffin-embedded mandible sections were prepared for laser capture microdissection. Microdissected protein extracts were analyzed by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS), and the data submitted to repeated measure ANOVA test (RM-ANOVA, alpha=5%). A total of 519 proteins were identified, with 97 (18.6%) proteins found exclusively in EIA sites and 50 (9.6%) proteins exclusively expressed in control sites. Fifty six (10.7%) proteins were differentially regulated by RM-ANOVA (p<0.05), with 24 regulated by the exclusive effect of EIA (12 proteins) or the interaction between EIA and time (12 proteins), including serpin 1a, procollagen C-endopeptidase enhancer, tenascin X (TNX), and asporin (ASPN). In conclusion, proteomic analysis demonstrated significantly altered protein profile in DC under EIA, providing new insights on DC biology and potential candidates for tissue engineering applications. Dental cementum (DC) is a mineralized tissue that covers the tooth root surface and has important functions in tooth attachment and position. DC and other periodontal tissues can be lost to disease, and regeneration is currently unpredictable due to lack of understanding of DC formation. This study used a model of experimentally-induced apposition (EIA) in mice to promote new cementum formation, followed by laser capture microdissection (LCM) and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) proteomic analysis. This approach identified proteins associated with new cementum formation that may be targets for promoting cementum regeneration. Copyright © 2016 Elsevier B.V. All rights reserved.

Two-colour chewing gum mixing ability: digitalisation and spatial heterogeneity analysis.

PubMed

Weijenberg, R A F; Scherder, E J A; Visscher, C M; Gorissen, T; Yoshida, E; Lobbezoo, F

2013-10-01

Many techniques are available to assess masticatory performance, but not all are appropriate for every population. A proxy suitable for elderly persons suffering from dementia was lacking, and a two-colour chewing gum mixing ability test was investigated for this purpose. A fully automated digital analysis algorithm was applied to a mixing ability test using two-coloured gum samples in a stepwise increased number of chewing cycles protocol (Experiment 1: n = 14; seven men, 19-63 years), a test-retest assessment (Experiment 2: n = 10; four men, 20-49 years) and compared to an established wax cubes mixing ability test (Experiment 3: n = 13; 0 men, 21-31 years). Data were analysed with repeated measures anova (Experiment 1), the calculation of the intraclass correlation coefficient (ICC; Experiment 2) and Spearman's rho correlation coefficient (Experiment 3). The method was sensitive to increasing numbers of chewing cycles (F5,65 = 57·270, P = 0·000) and reliable in the test-retest (ICC value of 0·714, P = 0·004). There was no significant correlation between the two-coloured gum test and the wax cubes test. The two-coloured gum mixing ability test was able to adequately assess masticatory function and is recommended for use in a population of elderly persons with dementia. © 2013 John Wiley & Sons Ltd.

Morphometric analysis of the infraorbital foramen, canal and groove using cone beam CT: considerations for creating artificial organs.

PubMed

Orhan, Kaan; Misirli, Melis; Aksoy, Secil; Seki, Umut; Hincal, Evren; Ormeci, Tugrul; Arslan, Ahmet

2016-01-01

The aim of this study was to examine the anatomy and variations of the infraorbital foramen and its surroundings via morphometric measurements using cone beam computed tomography (CBCT) scans derived from a 3D volumetric rendering program. 354 sides of CBCT scans from 177 patients were examined in this study. DICOM data from these images were exported to Maxilim® software in order to generate 3D surface models. The morphometric measurements were done for infraorbital foramen (IOF), infraorbital groove (IOG) and infraorbital canal (IOC). All images were evaluated by 1 radiologist. To assess intra-observer reliability, the Wilcoxon matched-pairs signed rank test was used. Differences between sex, side, age and measurements were evaluated using chi-square and paired t-test and measurements were evaluated using 1-way ANOVA tests. Differences were considered significant when p<0.05. The most common shape was oval for IOF and parallel for IOC without any accessory foramen. The results showed that females have smaller dimensions for the measurements between the two foramen rotundum (FR), FR-IOF, sella-FR, center of the IOF (cIOF)-nasion (N), cIOF-NB (nasion-B) (p>0.05). No significant difference was found according to age groups (p>0.05). These results provide detailed knowledge of the anatomical characteristics in this particular area. CBCT imaging with lower radiation dose and thin slices can be a powerful tool for anesthesia procedures like infra orbital nerve blocks, for surgical approaches like osteotomies and neurectomies and also for generating artificial prostheses.

Soil nutrients losses by wind erosion in a citrus crop at southeast Spain

NASA Astrophysics Data System (ADS)

Segovia, C.; Gómez, J. D.; Gallardo, P.; Lozano, F. J.; Asensio, C.

2017-06-01

The purpose of this study was to analyze the influence of wind erosion on the productivity of citric crops over gypsiric Fluvisols in Gador area (Almeria, SE Spain) by blowing air through a wind tunnel. Wind erosion varies considerably depending on time since the last tillage. This is because a physical crust forms after tilling which protects the soil from wind. Crust formation in the study area is strongly favored by dew, which causes them to form in around a week. The repeated measurements ANOVA, as a nonparametric alternative to the ANOVA, using the Geiiser method and the Friedman test shows significant differences ( P ≤ 0.05) in the fractions of very fine sand and coarse silt, which confirmed that very fine sand and coarse silt are the fractions most susceptible to loss from wind. The same statistical analysis for fertility showed smaller differences in organic carbon and K2O content, while N and P2O5 increased. Nutrients lost from wind imply an additional fertilization cost for a crop to be economically feasible. The cost of this restoration of nutrients lost from the soil because of wind erosion was based on experimental data taken in crusted soil and immediately after tilling. Losses in organic matter (O.M.), N, P2O5 and K2O were estimated based on the cost of fertilizers most commonly used in the area.

fMRI of parents of children with Asperger Syndrome: a pilot study.

PubMed

Baron-Cohen, Simon; Ring, Howard; Chitnis, Xavier; Wheelwright, Sally; Gregory, Lloyd; Williams, Steve; Brammer, Mick; Bullmore, Ed

2006-06-01

People with autism or Asperger Syndrome (AS) show altered patterns of brain activity during visual search and emotion recognition tasks. Autism and AS are genetic conditions and parents may show the 'broader autism phenotype.' (1) To test if parents of children with AS show atypical brain activity during a visual search and an empathy task; (2) to test for sex differences during these tasks at the neural level; (3) to test if parents of children with autism are hyper-masculinized, as might be predicted by the 'extreme male brain' theory. We used fMRI during a visual search task (the Embedded Figures Test (EFT)) and an emotion recognition test (the 'Reading the Mind in the Eyes' (or Eyes) test). Twelve parents of children with AS, vs. 12 sex-matched controls. Factorial analysis was used to map main effects of sex, group (parents vs. controls), and sexxgroup interaction on brain function. An ordinal ANOVA also tested for regions of brain activity where females>males>fathers=mothers, to test for parental hyper-masculinization. RESULTS ON EFT TASK: Female controls showed more activity in extrastriate cortex than male controls, and both mothers and fathers showed even less activity in this area than sex-matched controls. There were no differences in group activation between mothers and fathers of children with AS. The ordinal ANOVA identified two specific regions in visual cortex (right and left, respectively) that showed the pattern Females>Males>Fathers=Mothers, both in BA 19. RESULTS ON EYES TASK: Male controls showed more activity in the left inferior frontal gyrus than female controls, and both mothers and fathers showed even more activity in this area compared to sex-matched controls. Female controls showed greater bilateral inferior frontal activation than males. This was not seen when comparing mothers to males, or mothers to fathers. The ordinal ANOVA identified two specific regions that showed the pattern Females>Males>Mothers=Fathers: left medial temporal gyrus (BA 21) and left dorsolateral prefrontal cortex (BA 44). Parents of children with AS show atypical brain function during both visual search and emotion recognition, in the direction of hyper-masculinization of the brain. Because of the small sample size, and lack of age-matching between parents and controls, such results constitute a pilot study that needs replicating with larger samples.

Virtual Reality simulator for dental anesthesia training in the inferior alveolar nerve block.

PubMed

Corrêa, Cléber Gimenez; Machado, Maria Aparecida de Andrade Moreira; Ranzini, Edith; Tori, Romero; Nunes, Fátima de Lourdes Santos

2017-01-01

This study shows the development and validation of a dental anesthesia-training simulator, specifically for the inferior alveolar nerve block (IANB). The system developed provides the tactile sensation of inserting a real needle in a human patient, using Virtual Reality (VR) techniques and a haptic device that can provide a perceived force feedback in the needle insertion task during the anesthesia procedure. To simulate a realistic anesthesia procedure, a Carpule syringe was coupled to a haptic device. The Volere method was used to elicit requirements from users in the Dentistry area; Repeated Measures Two-Way ANOVA (Analysis of Variance), Tukey post-hoc test and averages for the results' analysis. A questionnaire-based subjective evaluation method was applied to collect information about the simulator, and 26 people participated in the experiments (12 beginners, 12 at intermediate level, and 2 experts). The questionnaire included profile, preferences (number of viewpoints, texture of the objects, and haptic device handler), as well as visual (appearance, scale, and position of objects) and haptic aspects (motion space, tactile sensation, and motion reproduction). The visual aspect was considered appropriate and the haptic feedback must be improved, which the users can do by calibrating the virtual tissues' resistance. The evaluation of visual aspects was influenced by the participants' experience, according to ANOVA test (F=15.6, p=0.0002, with p<0.01). The user preferences were the simulator with two viewpoints, objects with texture based on images and the device with a syringe coupled to it. The simulation was considered thoroughly satisfactory for the anesthesia training, considering the needle insertion task, which includes the correct insertion point and depth, as well as the perception of tissues resistances during the insertion.

Performance on large-scale science tests: Item attributes that may impact achievement scores

NASA Astrophysics Data System (ADS)

Gordon, Janet Victoria

Significant differences in achievement among ethnic groups persist on the eighth-grade science Washington Assessment of Student Learning (WASL). The WASL measures academic performance in science using both scenario and stand-alone question types. Previous research suggests that presenting target items connected to an authentic context, like scenario question types, can increase science achievement scores especially in underrepresented groups and thus help to close the achievement gap. The purpose of this study was to identify significant differences in performance between gender and ethnic subgroups by question type on the 2005 eighth-grade science WASL. MANOVA and ANOVA were used to examine relationships between gender and ethnic subgroups as independent variables with achievement scores on scenario and stand-alone question types as dependent variables. MANOVA revealed no significant effects for gender, suggesting that the 2005 eighth-grade science WASL was gender neutral. However, there were significant effects for ethnicity. ANOVA revealed significant effects for ethnicity and ethnicity by gender interaction in both question types. Effect sizes were negligible for the ethnicity by gender interaction. Large effect sizes between ethnicities on scenario question types became moderate to small effect sizes on stand-alone question types. This indicates the score advantage the higher performing subgroups had over the lower performing subgroups was not as large on stand-alone question types compared to scenario question types. A further comparison examined performance on multiple-choice items only within both question types. Similar achievement patterns between ethnicities emerged; however, achievement patterns between genders changed in boys' favor. Scenario question types appeared to register differences between ethnic groups to a greater degree than stand-alone question types. These differences may be attributable to individual differences in cognition, characteristics of test items themselves and/or opportunities to learn. Suggestions for future research are made.

The effects of caudal mobilisation with movement (MWM) and caudal self-mobilisation with movement (SMWM) in relation to restricted internal rotation in the hip: A randomised control pilot study.

PubMed

Walsh, Riche; Kinsella, Sharon

2016-04-01

A loss of internal rotation (IR) of the hip is associated with hip pathology. Improving IR may improve hip range of motion (ROM) or prevent hip pathology. The purpose of this study was to compare the immediate effects of caudal mobilisation with movement (MWM) and caudal self-mobilisation with movement (SMWM) on young healthy male subjects with reduced IR of the hip. A randomised controlled trial was performed. Twenty-Two subjects were randomised into a MWM group (n = 6), SMWM group (n = 8) or a control group (n = 8). The primary outcome measures included the functional internal rotation test (FIRT) for the hip and the passive seated internal rotation test (SIRT) for the hip. Outcomes were captured at baseline and immediately after one treatment of MWMs, SMWMs or control. A two-way analysis of variance (ANOVA), group × time interaction was conducted. The ANOVA revealed the only significant improvement was in the MWM group for the FIRT (p = 0.01), over the control group. Subjects with reduced IR of the hip who receive a single session of MWMs exhibited significantly improved functional IR of their hip than the control group. From the data presented, it can be suggested that caudal MWMs of the hip appear to have a positive effect on functional IR of healthy young hips. This may be due to addressing the positional fault theory or the arthrogenic muscular inhibition theory. SMWMs may be effective in augmenting treatments for patients waiting for hip operations. Copyright © 2016 Elsevier Ltd. All rights reserved.

The growing price gap between more and less healthy foods: analysis of a novel longitudinal UK dataset.

PubMed

Jones, Nicholas R V; Conklin, Annalijn I; Suhrcke, Marc; Monsivais, Pablo

2014-01-01

The UK government has noted the public health importance of food prices and the affordability of a healthy diet. Yet, methods for tracking change over time have not been established. We aimed to investigate the prices of more and less healthy foods over time using existing government data on national food prices and nutrition content. We linked economic data for 94 foods and beverages in the UK Consumer Price Index to food and nutrient data from the UK Department of Health's National Diet and Nutrition Survey, producing a novel dataset across the period 2002-2012. Each item was assigned to a food group and also categorised as either "more healthy" or "less healthy" using a nutrient profiling model developed by the Food Standards Agency. We tested statistical significance using a t-test and repeated measures ANOVA. The mean (standard deviation) 2012 price/1000 kcal was £2.50 (0.29) for less healthy items and £7.49 (1.27) for more healthy items. The ANOVA results confirmed that all prices had risen over the period 2002-2012, but more healthy items rose faster than less healthy ones in absolute terms:£0.17 compared to £0.07/1000 kcal per year on average for more and less healthy items, respectively (p<0.001). Since 2002, more healthy foods and beverages have been consistently more expensive than less healthy ones, with a growing gap between them. This trend is likely to make healthier diets less affordable over time, which may have implications for individual food security and population health, and it may exacerbate social inequalities in health. The novel data linkage employed here could be used as the basis for routine food price monitoring to inform public health policy.

Normal growth, altered growth? Study of the relationship between harris lines and bone form within a post-medieval plague cemetery (Dendermonde, Belgium, 16th Century).

PubMed

Boucherie, Alexandra; Castex, Dominique; Polet, Caroline; Kacki, Sacha

2017-01-01

Harris lines (HLs) are defined as transverse, mineralized lines associated with temporary growth arrest. In paleopathology, HLs are used to reconstruct health status of past populations. However, their etiology is still obscure. The aim of this article is to test the reliability of HLs as an arrested growth marker by investigating their incidence on human metrical parameters. The study was performed on 69 individuals (28 adults, 41 subadults) from the Dendermonde plague cemetery (Belgium, 16th century). HLs were rated on distal femora and both ends of tibiae. Overall prevalence and age-at-formation of each detected lines were calculated. ANOVA analyses were conducted within subadult and adult samples to test if the presence of HLs did impact size and shape parameters of the individuals. At Dendermonde, 52% of the individuals had at least one HL. The age-at-formation was estimated between 5 and 9 years old for the subadults and between 10 and 14 years old for the adults. ANOVA analyses showed that the presence of HLs did not affect the size of the individuals. However, significant differences in shape parameters were highlighted by HL presence. Subadults with HLs displayed slighter shape parameters than the subadults without, whereas the adults with HLs had larger measurements than the adults without. The results suggest that HLs can have a certain impact on shape parameters. The underlying causes can be various, especially for the early formed HLs. However, HLs deposited around puberty are more likely to be physiological lines reflecting hormonal secretions. Am. J. Hum. Biol. 29:e22885, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Virtual reality, ultrasound-guided liver biopsy simulator: development and performance discrimination

PubMed Central

Johnson, S J; Hunt, C M; Woolnough, H M; Crawshaw, M; Kilkenny, C; Gould, D A; England, A; Sinha, A; Villard, P F

2012-01-01

Objectives The aim of this article was to identify and prospectively investigate simulated ultrasound-guided targeted liver biopsy performance metrics as differentiators between levels of expertise in interventional radiology. Methods Task analysis produced detailed procedural step documentation allowing identification of critical procedure steps and performance metrics for use in a virtual reality ultrasound-guided targeted liver biopsy procedure. Consultant (n=14; male=11, female=3) and trainee (n=26; male=19, female=7) scores on the performance metrics were compared. Ethical approval was granted by the Liverpool Research Ethics Committee (UK). Independent t-tests and analysis of variance (ANOVA) investigated differences between groups. Results Independent t-tests revealed significant differences between trainees and consultants on three performance metrics: targeting, p=0.018, t=−2.487 (−2.040 to −0.207); probe usage time, p = 0.040, t=2.132 (11.064 to 427.983); mean needle length in beam, p=0.029, t=−2.272 (−0.028 to −0.002). ANOVA reported significant differences across years of experience (0–1, 1–2, 3+ years) on seven performance metrics: no-go area touched, p=0.012; targeting, p=0.025; length of session, p=0.024; probe usage time, p=0.025; total needle distance moved, p=0.038; number of skin contacts, p<0.001; total time in no-go area, p=0.008. More experienced participants consistently received better performance scores on all 19 performance metrics. Conclusion It is possible to measure and monitor performance using simulation, with performance metrics providing feedback on skill level and differentiating levels of expertise. However, a transfer of training study is required. PMID:21304005

The relative age effect among elite youth competitive swimmers.

PubMed

Costa, Aldo M; Marques, Mário C; Louro, Hugo; Ferreira, Sandra S; Marinho, Daniel A

2013-01-01

The aim of this study was to analyse the relative age effect (RAE) in competitive swimming. The best 50 Portuguese swimmers (12- to 18-year-olds) for the main individual swimming pool events of both genders were considered. Analysis was conducted on 7813 swimming event participants, taking account of respective swimmer birth dates and the Fédération Internationale de Natation points gained. Differences in the distribution of birth dates by quarter year were determined using the Chi-square. A one-way analysis of variance ANOVA was used to test for differences measured in points between individuals by quarterly birth year intervals. A two-way analysis of variance ANOVA was also conducted to test the interaction between gender and seasonal birth date with regard to performance. The results show an inequitable distribution (p<0.01) of birth dates by quarter for almost all age groups and both genders. However, the distribution of birth dates by quarter for each considered swim event shows that RAE seems to exist only for 12-year-old females and 12- to 15-year-old males. Analysing mean swimming performance, post-hoc results (p<0.01) show no consistency in RAE. Higher performance occurs among older swimmers only in 100 m butterfly (female 1998, 1st≠2nd quarter, p=0.003). The results also show no interaction between gender and seasonal birth date (p<0.01). Findings of this study show that a higher number of swimmers, particular males, are born in the first two quarters of the year, although there is mostly no effect of seasonal birth date on performance differences within the top 50 swimmers.

Effect of different surface treatments on the shear bond strength of nanofilled composite repairs

PubMed Central

Ahmadizenouz, Ghazaleh; Esmaeili, Behnaz; Taghvaei, Arnica; Jamali, Zahra; Jafari, Toloo; Amiri Daneshvar, Farshid; Khafri, Soraya

2016-01-01

Background. Repairing aged composite resin is a challenging process. Many surface treatment options have been proposed to this end. This study evaluated the effect of different surface treatments on the shear bond strength (SBS) of nano-filled composite resin repairs. Methods. Seventy-five cylindrical specimens of a Filtek Z350XT composite resin were fabricated and stored in 37°C distilled water for 24 hours. After thermocycling, the specimens were divided into 5 groups according to the following surface treatments: no treatment (group 1); air abrasion with 50-μm aluminum oxide particles (group 2); irradiation with Er:YAG laser beams (group 3); roughening with coarse-grit diamond bur + 35% phosphoric acid (group 4); and etching with 9% hydrofluoric acid for 120 s (group 5). Another group of Filtek Z350XT composite resin samples (4×6 mm) was fabricated for the measurement of cohesive strength (group 6). A silane coupling agent and an adhesive system were applied after each surface treatment. The specimens were restored with the same composite resin and thermocycled again. A shearing force was applied to the interface in a universal testing machine. Data were analyzed using one-way ANOVA and post hoc Tukey tests (P < 0.05). Results. One-way ANOVA indicated significant differences between the groups (P < 0.05). SBS of controls was significantly lower than the other groups; differences between groups 2, 3, 4, 5 and 6 were not significant. Surface treatment with diamond bur + 35% phosphoric acid resulted in the highest bond strength. Conclusion. All the surface treatments used in this study improved the shear bond strength of nanofilled composite resin used. PMID:27092209

An advanced expiratory circuit for the recovery of perfluorocarbon liquid from non-saturated perfluorocarbon vapour during partial liquid ventilation: an experimental model

PubMed Central

Dunster, Kimble R; Davies, Mark W; Fraser, John F

2006-01-01

Background The loss of perfluorocarbon (PFC) vapour in the expired gases during partial liquid ventilation should be minimized both to prevent perfluorocarbon vapour entering the atmosphere and to re-use the recovered PFC liquid. Using a substantially modified design of our previously described condenser, we aimed to determine how much perfluorocarbon liquid could be recovered from gases containing PFC and water vapour, at concentrations found during partial liquid ventilation, and to determine if the amount recovered differed with background flow rate (at flow rates suitable for use in neonates). Methods The expiratory line of a standard ventilator circuit set-up was mimicked, with the addition of two condensers. Perfluorocarbon (30 mL of FC-77) and water vapour, at concentrations found during partial liquid ventilation, were passed through the circuit at a number of flow rates and the percentage recovery of the liquids measured. Results From 14.2 mL (47%) to 27.3 mL (91%) of the infused 30 mL of FC-77 was recovered at the flow rates studied. Significantly higher FC-77 recovery was obtained at lower flow rates (ANOVA with Bonferroni's multiple comparison test, p < 0.0001). As a percentage of the theoretical maximum recovery, 64 to 95% of the FC-77 was recovered. Statistically significantly less FC-77 was recovered at 5 Lmin-1 (ANOVA with Bonferroni's multiple comparison test, p < 0.0001). Amounts of perfluorocarbon vapour recovered were 47%, 50%, 81% and 91% at flow rates of 10, 5, 2 and 1 Lmin-1, respectively. Conclusion Using two condensers in series 47% to 91% of perfluorocarbon liquid can be recovered, from gases containing perfluorocarbon and water vapour, at concentrations found during partial liquid ventilation. PMID:16457722

In situ effect of a CPP-ACP chewing gum on enamel erosion associated or not with abrasion.

PubMed

de Oliveira, Andressa Feitosa Bezerra; de Oliveira Diniz, Luciana Vilar; Forte, Franklin Delano Soares; Sampaio, Fabio Correia; Ccahuana-Vásquez, Renzo Alberto; Tochukwu Amaechi, Bennett

2017-01-01

The purpose of this study is to analyze the in situ effect of a casein phosphopeptide-stabilized amorphous calcium phosphate (CPP-ACP) chewing gum on human enamel erosion lesion associated or not with abrasion. A three-way crossover study of 7 days was conducted involving 10 volunteers subjected to the same protocol: (G1) CPP-ACP sugar-free chewing gum, (G2) regular sugar-free chewing gum without CPP-ACP, and (G3) saliva-no chewing gum. An abrasion test was included in each phase. A 3D non-contact profilometry measurement of lesion depth and surface roughness was obtained of sound and eroded surfaces. A salivary calcium concentration was determined for all volunteers. ANOVA followed by Tukey's test were used with a p < 0.05. The enamel depth and the enamel surface roughness of the CPP-ACP gum group were significantly lower than the others (ANOVA, p < 0.05). No significant differences were observed between the treatments when associated with abrasion (p > 0.05). A positive and significant correlation was seen between the lesion depth and enamel surface roughness for GI (r = 0.87, p = 0.00) and GIII (r = 0.79, p = 0.00) groups. The estimated total calcium presented in the saliva after the chewed CPP-ACP gum showed no statistical significance between the mean absorbance values at the different time collections (p > 0.05). It is demonstrated that the incorporation of the CPP-ACP into a sugar-free gum significantly increased the remineralization/protection of eroded enamel surface. The CPP-ACP added to gum may be a suitable alternative vehicle, to deliver calcium ions to saliva and therefore protecting enamel.

Inhibition of Streptococcus mutans biofilm formation on composite resins containing ursolic acid

PubMed Central

Kim, Soohyeon; Song, Minju; Roh, Byoung-Duck; Park, Sung-Ho

2013-01-01

Objectives To evaluate the inhibitory effect of ursolic acid (UA)-containing composites on Streptococcus mutans (S. mutans) biofilm. Materials and Methods Composite resins with five different concentrations (0.04, 0.1, 0.2, 0.5, and 1.0 wt%) of UA (U6753, Sigma Aldrich) were prepared, and their flexural strengths were measured according to ISO 4049. To evaluate the effect of carbohydrate source on biofilm formation, either glucose or sucrose was used as a nutrient source, and to investigate the effect of saliva treatment, the specimen were treated with either unstimulated whole saliva or phosphate-buffered saline (PBS). For biofilm assay, composite disks were transferred to S. mutans suspension and incubated for 24 hr. Afterwards, the specimens were rinsed with PBS and sonicated. The colony forming units (CFU) of the disrupted biofilm cultures were enumerated. For growth inhibition test, the composites were placed on a polystyrene well cluster, and S. mutans suspension was inoculated. The optical density at 600 nm (OD600) was recorded by Infinite F200 pro apparatus (TECAN). One-way ANOVA and two-way ANOVA followed by Bonferroni correction were used for the data analyses. Results The flexural strength values did not show significant difference at any concentration (p > 0.01). In biofilm assay, the CFU score decreased as the concentration of UA increased. The influence of saliva pretreatment was conflicting. The sucrose groups exhibited higher CFU score than glucose group (p < 0.05). In bacterial growth inhibition test, all experimental groups containing UA resulted in complete inhibition. Conclusions Within the limitations of the experiments, UA included in the composite showed inhibitory effect on S. mutans biofilm formation and growth. PMID:23741708

Differences in Empathy Levels of Medical Students Based on Gender, Year of Medical School and Career Choice.

PubMed

Tariq, Nabia; Tayyab, Ali; Jaffery, Tara

2018-04-01

To measure mean empathy scores of Pakistani medical students and to explore any association of empathy scores with gender, medical school year and future career choice. Cross-sectional survey. Shifa College of Medicine, Shifa Tameer-e-Millat University, during the academic year 2015-2016. The student version of Jefferson Scale of Physician Empathy (JSPE) was distributed to the students electronically via the student portal. Response that were completed in full were included in the study. Descriptive statistics was used to analyse student demographic data. The student score on the JSPE was reported as the mean (out of 7) of each item. Independent samples t-test was employed to check the significant differences between genders. Empathy score with advancing year of study was investigated using ANOVA. ANOVA with post-hoc Tukey's test was used to study the relationship between career choice and empathy score. The response rate was 70.94%. The mean score was 4.51 ±0.69. Females obtained greater, but statistically insignificant (p=0.08) empathy score (4.58) as compared to the male students (4.45). No statistically significant difference was seen between scores on the survey across the five academic years (F=0.88, p=0.47). Students who selected medicine and allied as career choice showed a significantly higher empathy score than those who opted for surgery. The internal consistency reliability (Cronbach's alpha) was 0.78. There were low levels of empathy in Pakistani medical students. Students with interest in medicine and allied showed higher empathy scores compared to surgical or technical specialties. No association of empathy scores with gender and medical school year was observed.

Health care providers' acceptance of unsedated colonoscopy before and after a state-of-the-art lecture on the feasibility of the option.

PubMed

Leung, Felix W; Aljebreen, Abdulrahman

2012-01-01

The impact of education on acceptance of unsedated colonoscopy by health care providers is unknown. To test the hypothesis that knowledge imparted by a lecture on unsedated colonoscopy is associated with its enhanced acceptance. At the State-of-the-Art Lecture on "Unsedated colonoscopy: Is it feasible?" presented at the 8 th Pan-Arab Conference on Gastroenterology, February, 2011, Riyadh, Saudi Arabia, a questionnaire survey of the audience was undertaken. An expectation questionnaire was administered before and after the lecture. Attendees responded anonymously. The responses of a convenient sample of 49 attendees who provided completed responses to the questionnaire both before and after the lecture were analyzed. Data are expressed as frequency counts and means±SEM. Repeated measures analysis of variance (ANOVA), ANOVA with contrasts and Chi-square analysis (Statview II Program for Macintosh computers) were used to assess the data. A P value of <0.05 is considered significant. The mean±SEM credibility score (maximum possible score=50) was 25.8 ± 1.8 before and 33.3 ± 2.1 after the lecture, with a significant improvement in mean score of 7.5 ± 1.3 (P=0.001, paired t test). Nineteen (39%) respondents were not willing to consider unsedated colonoscopy for themselves before the lecture. This number decreased to 13 (27%) after the lecture. Before the lecture only 4 (8%) respondents were willing to consider unsedated colonoscopy for themselves. After the lecture this number increased to 8 (16%). The data suggest education of healthcare professionals regarding the feasibility of unsedated colonoscopy appears to enhance its acceptance as a credible patient care option at a Pan-Arab Gastroenterology Conference.

Measuring sexual orientation in adolescent health surveys: evaluation of eight school-based surveys.

PubMed

Saewyc, Elizabeth M; Bauer, Greta R; Skay, Carol L; Bearinger, Linda H; Resnick, Michael D; Reis, Elizabeth; Murphy, Aileen

2004-10-01

To examine the performance of various items measuring sexual orientation within 8 school-based adolescent health surveys in the United States and Canada from 1986 through 1999. Analyses examined nonresponse and unsure responses to sexual orientation items compared with other survey items, demographic differences in responses, tests for response set bias, and congruence of responses to multiple orientation items; analytical methods included frequencies, contingency tables with Chi-square, and ANOVA with least significant differences (LSD)post hoc tests; all analyses were conducted separately by gender. In all surveys, nonresponse rates for orientation questions were similar to other sexual questions, but not higher; younger students, immigrants, and students with learning disabilities were more likely to skip items or select "unsure." Sexual behavior items had the lowest nonresponse, but fewer than half of all students reported sexual behavior, limiting its usefulness for indicating orientation. Item placement in the survey, wording, and response set bias all appeared to influence nonresponse and unsure rates. Specific recommendations include standardizing wording across future surveys, and pilot testing items with diverse ages and ethnic groups of teens before use. All three dimensions of orientation should be assessed where possible; when limited to single items, sexual attraction may be the best choice. Specific wording suggestions are offered for future surveys.

Rehabilitative ultrasound measurement of trapezius muscle contractile states in people with mild shoulder pain.

PubMed

O'Sullivan, Cliona; McCarthy Persson, Ulrik; Blake, Catherine; Stokes, Maria

2012-04-01

The utility of rehabilitative ultrasound imaging (RUSI) for assessing trapezius muscle contractile characteristics was investigated by examining whether muscle thickness changes during contraction (CT) differed between people with and without mild shoulder pain. In 18 subjects with mild shoulder pain (aged 28±8 years) and 18 matched controls, trapezius muscle thickness change was measured in prone at rest at 0° and during isometric CTs at 90° and 120° of shoulder abduction. Images were taken at four sites using a real-time ultrasound scanner (7-MHz linear transducer, 40 mm footprint). Percentage change in muscle thickness from rest was calculated. Differences between painful and non-painful shoulders and participant groups were examined by analysis of variance (ANOVA) and t-tests. There were no significant differences between groups or sides in trapezius muscle thickness change during CT. There was no significant difference in trapezius muscle resting thickness (RT) between painful and non-painful shoulders in the same subjects. Contractile ability of the trapezius muscle, assessed using RUSI was not impaired in subjects with mild shoulder pain during the test manoeuvres used. Further research is warranted involving patients with different severity of symptoms, using other test manoeuvres before RUSI can be advocated for assessing scapular muscle dysfunction. Copyright © 2011 Elsevier Ltd. All rights reserved.

Do occupational therapy and physical therapy curricula teach critical thinking skills?

PubMed

Vogel, Kimberly A; Geelhoed, Michael; Grice, Kimatha O; Murphy, Douglas

2009-01-01

This study evaluated whether critical thinking ability can be improved through participation in occupational therapy (OT) and physical therapy (PT) curricula. The researchers compared levels of the critical thinking skills of OT and PT students at the beginning and end of their programs to determine whether changes occurred and to examine facets of the curricula that may have caused the differences. The curricula include teaching strategies of problem-based learning modules, small group discussion and problem-solving, case studies, clinical observation, and evidence-based practice assignments, as well as teaching about critical thinking as a process in itself. Fifty OT and PT students completed the Watson-Glaser Critical Thinking Appraisal at the beginning and end of 20 mos of the academic phase of their master's degree programs. Researchers analyzed the data using a one-way repeated-measures ANOVA. Results showed no differences between OT and PT students on the pretest or post-test and no differences for PT students between the pretest and post-test. OT students' scores increased significantly from pretest to post-test. The influence of the timing of teaching critical thinking skills in the resulting differences between the two curricula, as well as the validity of the Watson-Glaser Critical Thinking Appraisal is a valid measure of critical thinking changes in allied health students are discussed.

Mild traumatic brain injuries in early adolescent rugby players: Long-term neurocognitive and academic outcomes.

PubMed

Alexander, D G; Shuttleworth-Edwards, A B; Kidd, M; Malcolm, C M

2015-01-01

Information is scant concerning enduring brain injury effects of participation in the contact sport of Rugby Union (hereafter rugby) on early adolescents. The objective was prospectively to investigate differences between young adolescent male rugby players and non-contact sports controls on neurocognitive test performance over 3 years and academic achievement over 6 years. A sample of boys from the same school and grade was divided into three groups: rugby with seasonal concussions (n = 45), rugby no seasonal concussions (n = 21) and non-contact sports controls (n = 30). Baseline neurocognitive testing was conducted pre-season in Grade 7 and post-season in Grades 8 and 9. Year-end academic grades were documented for Grades 6-9 and 12 (pre-high school to year of school leaving). A mixed model repeated measures ANOVA was conducted to investigate comparative neurocognitive and academic outcomes between the three sub-groups. Compared with controls, both rugby groups were significantly lower on the WISC-III Coding Immediate Recall sub-test. There was a significant interaction effect on the academic measure, with improved scores over time for controls, that was not in evidence for either rugby group. Tentatively, the outcome suggests cognitive vulnerability in association with school level participation in rugby.

The effectiveness of a supportive educative group intervention on family caregiver burden of patients with heart failure

PubMed Central

Etemadifar, Shahram; Bahrami, Masoud; Shahriari, Mohsen; Farsani, Alireza Khosravi

2014-01-01

Background: Living with heart failure patients is a complex situation for family caregivers. Few studies have been conducted to examine the effects of interventional programs to ease this condition. The purpose of this study was to determine the effectiveness of a supportive educative group intervention in reducing family caregivers’ burden of caregiving. Materials and Methods: This randomized clinical trail was conducted at a selective teaching hospital in Isfahan, Iran in 2012. The intervention consisted of four weekly multimedia training sessions of 2 h that included education and family support for 50 family caregivers. Caregiver burden was measured using the Zarit Burden Interview (ZBI). Paired t-test, Student's t-tests, and repeated measures analysis of variance (ANOVA) were used to test for significant differences of the mean scores of burden between the intervention and control groups over a 3-month period. Results: The intervention was successful in reducing caregiver burden over time both at the end of the intervention period (P = 0.000) and 3 months after the intervention (P = 0.000). Conclusions: Nurses and other healthcare providers can use the findings of this study in order to implement effective programs to reduce family caregivers’ challenges and to provide them more support. PMID:24949057

The effect of disinfectant solutions on the hardness of acrylic resin denture teeth.

PubMed

Pavarina, A C; Vergani, C E; Machado, A L; Giampaolo, E T; Teraoka, M T

2003-07-01

This investigation studied the effects of disinfectant solutions on the hardness of acrylic resin denture teeth. The occlusal surfaces of 64 resin denture teeth were ground flat with abrasives up to 400-grit silicon carbide paper. Measurements were made after polishing and after the specimens were stored in water at 37 degrees C for 48 h. The specimens were then divided into four groups and immersed in chemical disinfectants (4% chlorhexidine; 1% sodium hypochlorite and sodium perborate) for 10 min. The disinfection methods were performed twice to simulate clinical conditions and hardness measurements were made. Specimens tested as controls were immersed in water during the same disinfection time. Eight specimens were produced for each group. After desinfection procedures, testing of hardness was also performed after the samples were stored at 37 degrees C for 7, 30, 60, 90 and 120 days. Data were analysed using two-way analysis of variance (anova) and Tukey's test at 95% confidence level. According to the results, no significant differences were found between materials and immersion solutions (P > 0.05). However, a continuous decrease in hardness was noticed after ageing (P < 0.05). It was conclude that the surfaces of both acrylic resin denture teeth softened upon immersion in water regardless the disinfecting solution.

Influence of light intensity on surface free energy and dentin bond strength of core build-up resins.

PubMed

Shimizu, Y; Tsujimoto, A; Furuichi, T; Suzuki, T; Tsubota, K; Miyazaki, M; Platt, J A

2015-01-01

We examined the influence of light intensity on surface free energy characteristics and dentin bond strength of dual-cure direct core build-up resin systems. Two commercially available dual-cure direct core build-up resin systems, Clearfil DC Core Automix with Clearfil Bond SE One and UniFil Core EM with Self-Etching Bond, were studied. Bovine mandibular incisors were mounted in acrylic resin and the facial dentin surfaces were wet ground on 600-grit silicon carbide paper. Adhesives were applied to dentin surfaces and cured with light intensities of 0 (no irradiation), 200, 400, and 600 mW/cm(2). The surface free energy of the adhesives (five samples per group) was determined by measuring the contact angles of three test liquids placed on the cured adhesives. To determine the strength of the dentin bond, the core build-up resin pastes were condensed into the mold on the adhesive-treated dentin surfaces according to the methods described for the surface free energy measurement. The resin pastes were cured with the same light intensities as those used for the adhesives. Ten specimens per group were stored in water maintained at 37°C for 24 hours, after which they were shear tested at a crosshead speed of 1.0 mm/minute in a universal testing machine. Two-way analysis of variance (ANOVA) and a Tukey-Kramer test were performed, with the significance level set at 0.05. The surface free energies of the adhesive-treated dentin surfaces decreased with an increase in the light intensity of the curing unit. Two-way ANOVA revealed that the type of core build-up system and the light intensity significantly influence the bond strength, although there was no significant interaction between the two factors. The highest bond strengths were achieved when the resin pastes were cured with the strongest light intensity for all the core build-up systems. When polymerized with a light intensity of 200 mW/cm(2) or less, significantly lower bond strengths were observed. CONClUSIONS: The data suggest that the dentin bond strength of core build-up systems are still affected by the light intensity of the curing unit, which is based on the surface free energy of the adhesives. On the basis of the results and limitations of the test conditions used in this study, it appears that a light intensity of >400 mW/cm(2) may be required for achieving the optimal dentin bond strength.

Colorectal cancer screening patient education materials-how effective is online health information?

PubMed

John, Elizabeth Sheena; John, Ann M; Hansberry, David R; Thomas, Prashant J; Agarwal, Prateek; Deitch, Christopher; Chokhavatia, Sita

2016-12-01

Patients screened for colorectal cancer (CRC) frequently turn to the Internet to improve their understanding of tests used for detection, including colonoscopy, flexible sigmoidoscopy, fecal occult blood test (FOBT), and CT colonography. It was of interest to determine the quality and readability levels of online health information. The screening tools were googled, and the top 20 results of each test were analyzed for readability, accessibility, usability, and reliability. The 80 articles excluded scientific literature and blogs. We used ten validated readability scales to measure grade levels, and one-way ANOVA and Tukey's honestly statistical different (HSD) post hoc analyses to determine any statistically significant differences among the four diagnostic tests. The LIDA tool assessed overall quality by measuring accessibility, usability, and reliability. The 80 articles were written at an 11.7 grade level, with CT colonography articles written at significantly higher levels than FOBT articles, F(3, 75) = 3.07, p = 0.033. LIDA showed moderate percentages in accessibility (83.9 %), usability (73.0 %), and reliability (75.9 %). Online health information about CRC screening tools are written at higher levels than the National Institute of Health (NIH) and American Medical Association (AMA) recommended third to seventh grade levels. More patients could benefit from this modality of information if it were written at a level and quality that would better facilitate understanding.

In vitro determination of the mechanical and chemical properties of a fibre orthodontic retainer.

PubMed

Silvestrini-Biavati, Armando; Angiero, Francesca; Gibelli, Francesca; Signore, Antonio; Benedicenti, Stefano

2012-12-01

The aim of this study was to analyse, in vitro, the chemical and mechanical properties of a new fibre retainer, Everstick, comparing its characteristics with the requirements for an orthodontic retainer. Chemical analysis was used to examine seven fibre bundles exposed to a photocuring lamp and then to different acids and resistance to corrosion by artificial saliva fortified with plaque acids. The mechanical properties examined were tensile strength and resistance to flexural force. Ten fibre samples were tested for each mechanical analysis and the mean value and standard deviation were calculated. Wilcoxon signed rank test was used to evaluate change in weight after treatment in each group. To determine changes over time between the groups for each acid considered separately, both repeated measures analysis of variance (ANOVA) on original data and on rank transformed data were used. If the results were different, ANOVA on rank-transformed data was considered. Acetic acid was found to be the most corrosive and caused the most substance loss: both pure and at the salivary pH value. Hydrofluoric acid was the most damaging. For all acids analysed in both groups (lactic, formic, acetic, propionic), changes after treatment were statistically different between two groups (P < 0.001 for lactic, acetic, propionic; P = 0.004 for formic acid).The mean Young's modulus value was 68 510 MPa. Deformation before the fibre separated into its constituent elements (glass fibre and composite) was 3.9 per cent, stress to rupture was 1546 MPa, and resistance to bending was 534 MPa. The deflection produced over a length of 12 mm was 1.4 mm. The fibre bundle was attacked by acids potentially present in the oral cavity; the degree of aggressiveness depending on the acid concentration. To preserve fibre bundles long term, careful plaque control is necessary, especially in the interproximal spaces, to avoid acid formation. The tested product was found to be sufficiently strong to oppose flexural and occlusal forces.

Cervical and Incisal Marginal Discrepancy in Ceramic Laminate Veneering Materials: A SEM Analysis

PubMed Central

Ranganathan, Hemalatha; Ganapathy, Dhanraj M.; Jain, Ashish R.

2017-01-01

Context: Marginal discrepancy influenced by the choice of processing material used for the ceramic laminate veneers needs to be explored further for better clinical application. Aims: This study aimed to evaluate the amount of cervical and incisal marginal discrepancy associated with different ceramic laminate veneering materials. Settings and Design: This was an experimental, single-blinded, in vitro trial. Subjects and Methods: Ten central incisors were prepared for laminate veneers with 2 mm uniform reduction and heavy chamfer finish line. Ceramic laminate veneers fabricated over the prepared teeth using four different processing materials were categorized into four groups as Group I - aluminous porcelain veneers, Group II - lithium disilicate ceramic veneers, Group III - lithium disilicate-leucite-based veneers, Group IV - zirconia-based ceramic veneers. The cervical and incisal marginal discrepancy was measured using a scanning electron microscope. Statistical Analysis Used: ANOVA and post hoc Tukey honest significant difference (HSD) tests were used for statistical analysis. Results: The cervical and incisal marginal discrepancy for four groups was Group I - 114.6 ± 4.3 μm, 132.5 ± 6.5 μm, Group II - 86.1 ± 6.3 μm, 105.4 ± 5.3 μm, Group III - 71.4 ± 4.4 μm, 91.3 ± 4.7 μm, and Group IV - 123.1 ± 4.1 μm, 142.0 ± 5.4 μm. ANOVA and post hoc Tukey HSD tests observed a statistically significant difference between the four test specimens with regard to cervical marginal discrepancy. The cervical and incisal marginal discrepancy scored F = 243.408, P < 0.001 and F = 180.844, P < 0.001, respectively. Conclusion: This study concluded veneers fabricated using leucite reinforced lithium disilicate exhibited the least marginal discrepancy followed by lithium disilicate ceramic, aluminous porcelain, and zirconia-based ceramics. The marginal discrepancy was more in the incisal region than in the cervical region in all the groups. PMID:28839415

An evaluation of an educational intervention in psychology of injury for athletic training students.

PubMed

Stiller-Ostrowski, Jennifer L; Gould, Daniel R; Covassin, Tracey

2009-01-01

"Psychosocial Intervention and Referral" is 1 of the 12 content areas in athletic training education programs, but knowledge gained and skill usage after an educational intervention in this area have never been evaluated. To evaluate the effectiveness of an educational intervention in increasing psychology-of-injury knowledge and skill usage in athletic training students (ATSs). Observational study. An accredited athletic training education program at a large Midwestern university. Participants included 26 ATSs divided into 2 groups: intervention group (4 men, 7 women; age = 21.4 +/- 0.67 years, grade point average = 3.37) and control group (7 men, 8 women; age = 21.5 +/- 3.8 years, grade point average = 3.27). All participants completed the Applied Sport Psychology for Athletic Trainers educational intervention. Psychology-of-injury knowledge tests and skill usage surveys were administered to all participants at the following intervals: baseline, intervention week 3, and intervention week 6. Retention tests were administered to intervention-group participants at 7 and 14 weeks after intervention. Analysis techniques included mixed-model analysis of variance (ANOVA) and repeated-measures ANOVA. The Applied Sport Psychology for Athletic Trainers educational intervention effectively increased psychology-of-injury knowledge (29-point increase from baseline to intervention week 6; F(2,23) = 29.358, P < .001, eta(p) (2) = 0.719) and skill usage (50-point increase from baseline to intervention week 6; F(2,23) = 5.999, P = .008, eta(p) (2) = 0.343) in undergraduate ATSs. These increases were maintained at the 7-week and 14-week retention testing (P < .001 for both). This first attempt at evaluating an educational intervention designed to improve ATSs' knowledge and skill usage revealed that the intervention was effective. Although both knowledge and skill usage scores decreased by the end of the retention period, the scores were still higher than baseline scores, indicating that the intervention was effective.

Cervical and Incisal Marginal Discrepancy in Ceramic Laminate Veneering Materials: A SEM Analysis.

PubMed

Ranganathan, Hemalatha; Ganapathy, Dhanraj M; Jain, Ashish R

2017-01-01

Marginal discrepancy influenced by the choice of processing material used for the ceramic laminate veneers needs to be explored further for better clinical application. This study aimed to evaluate the amount of cervical and incisal marginal discrepancy associated with different ceramic laminate veneering materials. This was an experimental, single-blinded, in vitro trial. Ten central incisors were prepared for laminate veneers with 2 mm uniform reduction and heavy chamfer finish line. Ceramic laminate veneers fabricated over the prepared teeth using four different processing materials were categorized into four groups as Group I - aluminous porcelain veneers, Group II - lithium disilicate ceramic veneers, Group III - lithium disilicate-leucite-based veneers, Group IV - zirconia-based ceramic veneers. The cervical and incisal marginal discrepancy was measured using a scanning electron microscope. ANOVA and post hoc Tukey honest significant difference (HSD) tests were used for statistical analysis. The cervical and incisal marginal discrepancy for four groups was Group I - 114.6 ± 4.3 μm, 132.5 ± 6.5 μm, Group II - 86.1 ± 6.3 μm, 105.4 ± 5.3 μm, Group III - 71.4 ± 4.4 μm, 91.3 ± 4.7 μm, and Group IV - 123.1 ± 4.1 μm, 142.0 ± 5.4 μm. ANOVA and post hoc Tukey HSD tests observed a statistically significant difference between the four test specimens with regard to cervical marginal discrepancy. The cervical and incisal marginal discrepancy scored F = 243.408, P < 0.001 and F = 180.844, P < 0.001, respectively. This study concluded veneers fabricated using leucite reinforced lithium disilicate exhibited the least marginal discrepancy followed by lithium disilicate ceramic, aluminous porcelain, and zirconia-based ceramics. The marginal discrepancy was more in the incisal region than in the cervical region in all the groups.

Clinical effectiveness of vitamin E and vitamin B6 for improving pain severity in cyclic mastalgia.

PubMed

Shobeiri, Fatemeh; Oshvandi, Khodayar; Nazari, Mansour

2015-01-01

Recent attempts have been focused on employing chemical and natural supplemental agents for treatment of cyclic mastalgia. Among various agents, the potential effects of vitamins remain questionable. In the present study, we examined the efficacy of two types of these vitamin supplements (vitamin E and vitamin B6) in improving pain severity in cyclic mastalgia. In a randomized double-blinded clinical trial, 80 patients suffering from cyclic mastalgia were randomly assigned to receive 200 IU of vitamin E daily or 40 mg/day of vitamin B6 for 2 months. Written informed consent was obtained from all participants. Severity of breast pain was detected by the Cardiff breast pain score during one menstrual cycle before and two menstrual cycles after the intervention. Data were analyzed using t-test, Chi-squared test, analysis of variance (ANOVA), and regression with SPSS version 19 and P < 0.05 was considered significant. There was no significant difference in the mean of severity of cyclic mastalgia during one menstrual cycle before the intervention between the vitamin E and B6 groups (9.1 ± 2.1 and 8.4 ± 3.1, respectively), but the difference was significant during the first cycle (5.1 ± 1.6 and 5.2 ± 2.5, respectively) and the second menstrual cycle (2.3 ± 1.0 and 2.6 ± 2.0, respectively) in the two groups after the intervention. The trend of changes in pain severity score showed significant downward trend of pain severity score within the study period in both the treatment groups (P < 0.001), while these trends were similar in both groups when examined by the repeated-measure ANOVA test. By multivariable linear regression analysis adjusted for baseline variables, we found that both the treatment regimens resulted in similar reduction in breast pain severity (P = 0.067). Both regimens containing vitamin E and vitamin B6 are similar in reducing breast pain severity in cyclic mastalgia.

Torque resistance of impression copings after direct implant impression: An in vitro evaluation of impression materials with and without adhesive.

PubMed

Auroy, Pascal; Nicolas, Emanuel; Bedouin, Yvan

2017-01-01

No data are available on the ability of an impression coping to resist the manual placement of an abutment replica (implant analog) during prosthodontic laboratory procedures after a direct (pick-up) impression. The purpose of this in vitro study was to evaluate the torque resistance of impression copings after a direct impression, that is, the amount of rotational torque sufficient to induce irreversible displacement of impression copings in the impression material bulk once the impression has been made. A reference model with 5 abutment replicas was constructed. Five impression copings were screwed onto the abutment replicas, and standardized impressions were made. A controlled twisting force was applied to each impression coping. A torque tester recorded the torque variation. Three elastomeric impression materials were tested. ANOVA and the Tukey test (α=.05) were performed using an average of 30 measurements per impression material, with and without adhesive. ANOVA and the Tukey test results showed that the adhesive, cohesive, and mechanical bonds between the impression coping and the impression material depended greatly on the type of material and that the average rupture threshold of these bonds was statistically significantly different in pairwise comparisons (P<.05). The curve analysis showed that when the impression materials are used with adhesives, the deformation of the interface is irreversible beyond 5 Ncm of torque. The polyether impression material is the direct impression material that showed the highest breakdown threshold for adhesive bonding when used without an adhesive. The use of an adhesive on impression copings leads to irreversible deformation of the interface at torque stresses well below the adhesive bond threshold of the same materials used without an adhesive. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

SPINAL AND PERIPHERAL DRY NEEDLING VERSUS PERIPHERAL DRY NEEDLING ALONE AMONG INDIVIDUALS WITH A HISTORY OF LATERAL ANKLE SPRAIN: A RANDOMIZED CONTROLLED TRIAL

PubMed Central

Rossi, Ainsley; Blaustein, Sara; Brown, Joshua; Dieffenderfer, Kari; Ervin, Elaine; Griffin, Steven; Frierson, Elizabeth; Geist, Kathleen

2017-01-01

Background In addition to established interventions, dry needling may reduce impairments leading to greater functional abilities for individuals following ankle sprain. Hypothesis/Purpose The purpose of this study was to compare effects of spinal and peripheral dry needling (DN) with peripheral DN alone on impairments and functional performance among individuals with a history of lateral ankle sprain. Study Design Randomized controlled trial. Methods Twenty individuals with a history of lateral ankle sprain (18 bilateral, 2 unilateral) participated in this study (4 males, 16 females; mean age 28.9 + /- 9.2 years). During the first of two sessions, participants completed the Foot and Ankle Disability Index (FADI) and the Cumberland Ankle Instability Tool (CAIT) and their strength, unilateral balance, and unilateral hop test performance was assessed. Participants were randomly assigned to a spinal and peripheral DN group (SPDN), or a peripheral only DN group (PDN). Participants in the SPDN site group received DN to bilateral L5 multifidi and fibularis longus and brevis muscles on the involved lower extremity. Participants in the PDN group received DN to the fibularis muscles alone. Participants’ strength, balance and hop test performance were reassessed immediately following the intervention, and at follow-up 6-7 days later, all outcome measures were reassessed. Three-way mixed model ANOVAs and Mann-Whitney U tests assessed between group differences for outcome variables with normal distributions and non-normal distributions, respectively. Results ANOVAs showed significant group by time interaction (p<0.05) for invertor strength, significant side by group and time by group interactions (p<0.05) for plantarflexor-evertor strength, no significant findings for dorsiflexor-invertor strength, significant side by time interaction (p<0.05) for unilateral balance, significant main effect of time (p<0.05) for triple hop for distance test, and significant main effect of side (p<0.05) for the CAIT. Mann-Whitney U tests showed no significance (p>0.05) for the side hop test or FADI. Conclusion The results suggest that DN of the multifidi in addition to fibularis muscles does not result in improvements in strength, unilateral balance or unilateral hop test performance, compared to DN the fibularis muscles alone among individuals with a history of ankle sprain. PMID:29234555

The impact of length of stay on recovery measures in faith-based addiction treatment.

PubMed

Lashley, Mary

2018-03-30

To determine the impact of length of stay among homeless men in faith-based residential addictions recovery on physical activity, depression, self-esteem, and nicotine dependence. A time series design was utilized to measure changes in the four quality measures at program entry and at 3, 6, and 9 months following admission. The sample consisted of 175 homeless residents enrolled in a faith-based residential recovery program. Paired t tests were used to determine the change in average instrument response from admission to each follow-up period. Analysis of variance (ANOVA) and Tukey posthoc tests were used to assess for differences in length of stay between demographic variables. Statistically significant improvements were noted in self-esteem and depressive symptomatology at 3 and 6 months following admission and in physical activity levels at 3 months following admission. Nicotine dependence scores declined at 3 and 6 months but were not statistically significant. Time spent in this faith-based spiritual recovery program had a significant impact on depression, self-esteem, and physical activity. Recommendations for future study include conducting research to analyze the relationship between distinct program elements and quality indicators and comparing faith-based programs to other similar programs and to publicly funded secular recovery programs. © 2018 Wiley Periodicals, Inc.

Vibration characteristics of dental high-speed turbines and speed-increasing handpieces.

PubMed

Poole, Ruth L; Lea, Simon C; Dyson, John E; Shortall, Adrian C C; Walmsley, A Damien

2008-07-01

Vibrations of dental handpieces may contribute to symptoms of hand-arm vibration syndrome in dental personnel and iatrogenic enamel cracking in teeth. However, methods for measuring dental handpiece vibrations have previously been limited and information about vibration characteristics is sparse. This preliminary study aimed to use a novel approach to assess the vibrations of unloaded high-speed handpieces in vitro. Maximum vibration displacement amplitudes of five air turbines and two speed-increasing handpieces were recorded whilst they were operated with and without a rotary cutting instrument (RCI) using a scanning laser vibrometer (SLV). RCI rotation speeds, calculated from frequency peaks, were consistent with expected values. ANOVA statistical analysis indicated significant differences in vibrations between handpiece models (p<0.01), although post hoc tests revealed that differences between most individual models were not significant (p>0.11). Operating handpieces with a RCI resulted in greater vibrations than with no RCI (p<0.01). Points on the head of the handpiece showed greater vibration displacement amplitudes than points along the body (p<0.01). Although no single measurement exceeded 4 microm for the handpieces in the current test setup (implying that these vibrations may be unlikely to cause adverse effects), this study has formed the basis for future work which will include handpiece vibration measurements whilst cutting under clinically representative loads.

Influence of operating microscope in the sealing of cervical perforations.

PubMed

Schmidt, Bruna Schwingel; Zaccara, Ivana Maria; Reis Só, Marcus Vinícius; Kuga, Milton Carlos; Palma-Dibb, Regina Guenka; Kopper, Patrícia Maria Poli

2016-01-01

Accidental root canal perforations are among the main complications of endodontic treatment. This study evaluated the influence of operating microscope (OM) in the marginal adaptation of mineral trioxide aggregate (MTA) (Angelus(®)) and glass ionomer (Vitremer) inserted into cervical perforations. Perforations were made in the cervical third of the buccal wall of the root canal in mandibular incisors. Next, the teeth were divided into four groups (N = 10): MG - MTA without OM; VG - Vitremer without OM; MOMG - MTA with OM; VOMG - Vitremer with OM. The perforations were sealed according to the group and the teeth were prepared for analysis by confocal laser scanning microscope. Images of perforation region (1,024×) were made and the gap presented by the materials was measured using the Image J program. LEXT OLS4100 three dimensional (3D) measuring laser microscope measured the volumetric misfit. Data of gap were analyzed by Kruskal-Wallis and Dunn's tests. Analysis of variance (ANOVA) and Tukey's tests compared the volumetric misfits. The results showed lower volume and gap in the interface dentin/material in VOMG compared to the other groups (P < 0.05). The use of OM improved the quality of cervical perforations sealed with Vitremer, being indicated in clinical situations of iatrogenic cervical perforations.

Effect of feedback techniques for lower back pain on gluteus maximus and oblique abdominal muscle activity and angle of pelvic rotation during the clam exercise.

PubMed

Koh, Eun-Kyung; Park, Kyue-Nam; Jung, Do-Young

2016-11-01

This study was conducted in order to determine the effect of feedback tools on activities of the gluteus maximus (Gmax) and oblique abdominal muscles and the angle of pelvic rotation during clam exercise (CE). Comparative study using repeated measures. University laboratory. Sixteen subjects with lower back pain. Each subject performed the CE without feedback, the CE using a pressure biofeedback unit (CE-PBU), and the CE with palpation and visual feedback (CE-PVF). Electromyographic (EMG) activity and the angles of pelvic rotation were measured using surface EMG and a three-dimensional motion-analysis system, respectively. One-way repeated-measures ANOVA followed by the Bonferroni post hoc test were used to compare the EMG activity in each muscle as well as the angle of pelvic rotation during the CE, CE-PBU, and CE-PVF. The results of post-hoc testing showed a significantly reduced angle of pelvic rotation and significantly more Gmax EMG activity during the CE-PVF compared with during the CE and CE-PBU. These findings suggest that palpation and visual feedback is effective for activating the Gmax and controlling pelvic rotation during the CE in subjects with lower back pain. Copyright © 2016 Elsevier Ltd. All rights reserved.

Anaerobic Threshold and Salivary α-amylase during Incremental Exercise.

PubMed

Akizuki, Kazunori; Yazaki, Syouichirou; Echizenya, Yuki; Ohashi, Yukari

2014-07-01

[Purpose] The purpose of this study was to clarify the validity of salivary α-amylase as a method of quickly estimating anaerobic threshold and to establish the relationship between salivary α-amylase and double-product breakpoint in order to create a way to adjust exercise intensity to a safe and effective range. [Subjects and Methods] Eleven healthy young adults performed an incremental exercise test using a cycle ergometer. During the incremental exercise test, oxygen consumption, carbon dioxide production, and ventilatory equivalent were measured using a breath-by-breath gas analyzer. Systolic blood pressure and heart rate were measured to calculate the double product, from which double-product breakpoint was determined. Salivary α-amylase was measured to calculate the salivary threshold. [Results] One-way ANOVA revealed no significant differences among workloads at the anaerobic threshold, double-product breakpoint, and salivary threshold. Significant correlations were found between anaerobic threshold and salivary threshold and between anaerobic threshold and double-product breakpoint. [Conclusion] As a method for estimating anaerobic threshold, salivary threshold was as good as or better than determination of double-product breakpoint because the correlation between anaerobic threshold and salivary threshold was higher than the correlation between anaerobic threshold and double-product breakpoint. Therefore, salivary threshold is a useful index of anaerobic threshold during an incremental workload.

Effect of Foot Hyperpronation on Lumbar Lordosis and Thoracic Kyphosis in Standing Position Using 3-Dimensional Ultrasound-Based Motion Analysis System

PubMed Central

Farokhmanesh, Khatere; Shirzadian, Toraj; Mahboubi, Mohammad; Shahri, Mina Neyakan

2014-01-01

Based on clinical observations, foot hyperpronation is very common. Excessive pronation (hyperpronation) can cause malalignment of the lower extremities. This most often leads to functional and structural deficits. The aim of this study was to assess the effect of foot hyperpronation on lumbar lordosis and thoracic kyphosis. Thirty five healthy subjects (age range, 18030 years) were asked to stand on 4 positions including a flat surface (normal position) and on wedges angled at 10, 15, and 20 degrees. Sampling was done using simple random sampling. Measurements were made by a motion analysis system. For data analysis, the SPSS software (ver. 18) using paired t-test and repeated measures analysis of variance (ANOVA) was applied. The eversion created by the wedges caused a significant increase in lumbar lordosis and thoracic kyphosis. The most significant change occurred between two consecutive positions of flat surface and the first wedge. The t-test for repeated measures showed a high correlation between each two consecutive positions. The results showed that with increased bilateral foot pronation, lumbar lordosis and thoracic kyphosis increased as well. In fact, each of these results is a compensation phenomenon. Further studies are required to determine long-term results of excessive foot pronation and its probable effect on damage progression. PMID:25169004

Effect of foot hyperpronation on lumbar lordosis and thoracic kyphosis in standing position using 3-dimensional ultrasound-based motion analysis system.

PubMed

Farokhmanesh, Khatere; Shirzadian, Toraj; Mahboubi, Mohammad; Shahri, Mina Neyakan

2014-06-17

Based on clinical observations, foot hyperpronation is very common. Excessive pronation (hyperpronation) can cause malalignment of the lower extremities. This most often leads to functional and structural deficits. The aim of this study was to assess the effect of foot hyperpronation on lumbar lordosis and thoracic kyphosis. Thirty five healthy subjects (age range, 18030 years) were asked to stand on 4 positions including a flat surface (normal position) and on wedges angled at 10, 15, and 20 degrees. Sampling was done using simple random sampling. Measurements were made by a motion analysis system. For data analysis, the SPSS software (ver. 18) using paired t-test and repeated measures analysis of variance (ANOVA) was applied. The eversion created by the wedges caused a significant increase in lumbar lordosis and thoracic kyphosis. The most significant change occurred between two consecutive positions of flat surface and the first wedge. The t-test for repeated measures showed a high correlation between each two consecutive positions. The results showed that with increased bilateral foot pronation, lumbar lordosis and thoracic kyphosis increased as well. In fact, each of these results is a compensation phenomenon. Further studies are required to determine long-term results of excessive foot pronation and its probable effect on damage progression.

Statistical Tutorial | Center for Cancer Research

Cancer.gov

Recent advances in cancer biology have resulted in the need for increased statistical analysis of research data.  ST is designed as a follow up to Statistical Analysis of Research Data (SARD) held in April 2018.  The tutorial will apply the general principles of statistical analysis of research data including descriptive statistics, z- and t-tests of means and mean differences, simple and multiple linear regression, ANOVA tests, and Chi-Squared distribution.

A study on the compatibility between one-bottle dentin adhesives and composite resins using micro-shear bond strength.

PubMed

Song, Minju; Shin, Yooseok; Park, Jeong-Won; Roh, Byoung-Duck

2015-02-01

This study was performed to determine whether the combined use of one-bottle self-etch adhesives and composite resins from same manufacturers have better bond strengths than combinations of adhesive and resins from different manufacturers. 25 experimental micro-shear bond test groups were made from combinations of five dentin adhesives and five composite resins with extracted human molars stored in saline for 24 hr. Testing was performed using the wire-loop method and a universal testing machine. Bond strength data was statistically analyzed using two way analysis of variance (ANOVA) and Tukey's post hoc test. Two way ANOVA revealed significant differences for the factors of dentin adhesives and composite resins, and significant interaction effect (p < 0.001). All combinations with Xeno V (Dentsply De Trey) and Clearfil S(3) Bond (Kuraray Dental) adhesives showed no significant differences in micro-shear bond strength, but other adhesives showed significant differences depending on the composite resin (p < 0.05). Contrary to the other adhesives, Xeno V and BondForce (Tokuyama Dental) had higher bond strengths with the same manufacturer's composite resin than other manufacturer's composite resin. Not all combinations of adhesive and composite resin by same manufacturers failed to show significantly higher bond strengths than mixed manufacturer combinations.

Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine

PubMed Central

Mortazavi, Vajihesadat; Fathi, Mohammadhosein; Ataei, Ebrahim; Khodaeian, Niloufar; Askari, Navid

2012-01-01

In this laboratory study shear bond strengths of three filled and one unfilled adhesive systems to enamel and dentine were compared. Forty-eight extracted intact noncarious human mandibular molars were randomly assigned to two groups of 24 one for bonding to enamel and the other for bonding to dentine. Buccal and lingual surfaces of each tooth were randomly assigned for application of each one of filled (Prime & Bond NT (PBNT), Optibond Solo Plus (OBSP), and Clearfil SE Bond (CSEB)) and unfilled (Single Bond (SB)) adhesive systems (n = 12). A universal resin composite was placed into the translucent plastic cylinders (3 mm in diameter and 2 mm in length) and seated against the enamel and dentine surfaces and polymerized for 40 seconds. Shear bond strength was determined using a universal testing machine, and the results were statistically analyzed using two-way ANOVA, one-way ANOVA, t-test, and Tukey HSD post hoc test with a 5% level of significance.There were no statistically significant differences in bond strength between the adhesive systems in enamel, but CSEB and SB exhibited significantly higher and lower bond strength to dentine, respectively, than the other tested adhesive systems while there were no statistically significant differences between PBNT and OBSP. PMID:23209471

Development and psychometric testing of a trans-professional evidence-based practice profile questionnaire.

PubMed

McEvoy, Maureen Patricia; Williams, Marie T; Olds, Timothy Stephen

2010-01-01

Previous survey tools operationalising knowledge, attitudes or beliefs about evidence-based practice (EBP) have shortcomings in content, psychometric properties and target audience. This study developed and psychometrically assessed a self-report trans-professional questionnaire to describe an EBP profile. Sixty-six items were collated from existing EBP questionnaires and administered to 526 academics and students from health and non-health backgrounds. Principal component factor analysis revealed the presence of five factors (Relevance, Terminology, Confidence, Practice and Sympathy). Following expert panel review and pilot testing, the 58-item final questionnaire was disseminated to 105 subjects on two occasions. Test-retest and internal reliability were quantified using intra-class correlation coefficients (ICCs) and Cronbach's alpha, convergent validity against a commonly used EBP questionnaire by Pearson's correlation coefficient and discriminative validity via analysis of variance (ANOVA) based on exposure to EBP training. The final questionnaire demonstrated acceptable internal consistency (Cronbach's alpha 0.96), test-retest reliability (ICCs range 0.77-0.94) and convergent validity (Practice 0.66, Confidence 0.80 and Sympathy 0.54). Three factors (Relevance, Terminology and Confidence) distinguished EBP exposure groups (ANOVA p < 0.001-0.004). The evidence-based practice profile (EBP(2)) questionnaire is a reliable instrument with the ability to discriminate for three factors, between respondents with differing EBP exposures.

Serotonergic gene polymorphisms (5-HTTLPR, 5HTR1A, 5HTR2A), and population differences in aggression: traditional (Hadza and Datoga) and industrial (Russians) populations compared.

PubMed

Butovskaya, Marina L; Butovskaya, Polina R; Vasilyev, Vasiliy A; Sukhodolskaya, Jane M; Fekhredtinova, Dania I; Karelin, Dmitri V; Fedenok, Julia N; Mabulla, Audax Z P; Ryskov, Alexey P; Lazebny, Oleg E

2018-04-16

Current knowledge on genetic basis of aggressive behavior is still contradictory. This may be due to the fact that the majority of studies targeting associations between candidate genes and aggression are conducted on industrial societies and mainly dealing with various types of psychopathology and disorders. Because of that, our study was carried on healthy adult individuals of both sex (n = 853). Three populations were examined: two traditional (Hadza and Datoga) and one industrial (Russians), and the association of aggression with the following polymorphisms 5-HTTLPR, rs6295 (5HTR1A gene), and rs6311 (5HTR2A gene) were tested. Aggression was measured as total self-ratings on Buss-Perry Aggression Questionnaire. Distributions of allelic frequencies of 5-HTTLPR and 5HTR1A polymorphisms were significantly different among the three populations. Consequently, the association analyses for these two candidate genes were carried out separately for each population, while for the 5HTR2A polymorphism, it was conducted on the pooled data that made possible to introduce ethnic factor in the ANOVA model. The traditional biometrical approach revealed no sex differences in total aggression in all three samples. The three-way ANOVA (μ + 5-HTTLPR + 5HTR1A + 5HTR2A +ε) with measures of self-reported total aggression as dependent variable revealed significant effect of the second serotonin receptor gene polymorphism for the Hadza sample. For the Datoga, the interaction effect between 5-HTTLPR and 5HTR1A was significant. No significant effects of the used polymorphisms were obtained for Russians. The results of two-way ANOVA with ethnicity and the 5HTR2A polymorphism as main effects and their interactions revealed the highly significant effect of ethnicity, 5HTR2A polymorphism, and their interaction on total aggression. Our data provided obvious confirmation for the necessity to consider the population origin, as well as cultural background of tested individuals, while searching for associations between genes and behavior, and demonstrated the role of cultural attitudes towards the use of in-group aggression. Our data partly explained the reasons for disagreement in results of different teams, searching for candidate-gene associations with behavior without considerations of culturally desirable norms. Previous studies suggested that the 5HTR2A gene polymorphism associates with aggression and criminality. Our data extended these findings, demonstrating the role of rs6311 (5HTR2A gene) in aggression in adult healthy men and women from our samples. We found that G-allele carriers were rated higher on total aggression.

A comparison between conventional and digital radiography in root canal working length determination.

PubMed

Farida, Abesi; Maryam, Ehsani; Ali, Mirzapour; Ehsan, Moudi; Sajad, Yousefi; Soraya, Khafri

2013-01-01

Obtaining a correct working length is necessary for successful root canal treatment. The aim of this study was to compare conventional and digital radiography in measuring root canal working length. In this in vitro study 20 mesio buccal canal from maxillary first molars with moderate and severe curvature and 20 canal form anterior teeth with mild curvature were chosen and their working length were measured with number 15 k file (Maillefer, DENTSPLY, Germany). Then for each canal five radiographies were taken, three conventional radiographies using three methods of processing: Manual, automatic, and monobath solution; in addition to two other digital radiographies using CCD and PSP receptors. Two independent observers measured working length in each technique. Finally, the mean of working length in each group was compared with real working length using a paired T-test. Also a one-way ANOVA test was used for comparing the two groups. The level of statistical significance was P < 0.05. The results have shown that there was a high interobserver agreement on the measurements of the working length in conventional and digital radiography (P ≤ 0.001). Also there was no significant difference between conventional and digital radiography in measuring working length (P > 0.05). Therefore it was concluded that the accuracy of digital radiography is comparable with conventional radiography in measuring working length, so considering the advantages of the digital radiography, it can be used for working length determination.

Is digital photography an accurate and precise method for measuring range of motion of the hip and knee?

PubMed

Russo, Russell R; Burn, Matthew B; Ismaily, Sabir K; Gerrie, Brayden J; Han, Shuyang; Alexander, Jerry; Lenherr, Christopher; Noble, Philip C; Harris, Joshua D; McCulloch, Patrick C

2017-09-07

Accurate measurements of knee and hip motion are required for management of musculoskeletal pathology. The purpose of this investigation was to compare three techniques for measuring motion at the hip and knee. The authors hypothesized that digital photography would be equivalent in accuracy and show higher precision compared to the other two techniques. Using infrared motion capture analysis as the reference standard, hip flexion/abduction/internal rotation/external rotation and knee flexion/extension were measured using visual estimation, goniometry, and photography on 10 fresh frozen cadavers. These measurements were performed by three physical therapists and three orthopaedic surgeons. Accuracy was defined by the difference from the reference standard, while precision was defined by the proportion of measurements within either 5° or 10°. Analysis of variance (ANOVA), t-tests, and chi-squared tests were used. Although two statistically significant differences were found in measurement accuracy between the three techniques, neither of these differences met clinical significance (difference of 1.4° for hip abduction and 1.7° for the knee extension). Precision of measurements was significantly higher for digital photography than: (i) visual estimation for hip abduction and knee extension, and (ii) goniometry for knee extension only. There was no clinically significant difference in measurement accuracy between the three techniques for hip and knee motion. Digital photography only showed higher precision for two joint motions (hip abduction and knee extension). Overall digital photography shows equivalent accuracy and near-equivalent precision to visual estimation and goniometry.

Pharmacological and Behavioral Enhancement of Neuroplasticity in the MPTP Lesioned Mouse and Nonhuman Primate

DTIC Science & Technology

2007-05-01

and post - synaptic dopamine biosynthesis, uptake and receptor expression as well as glutamatergic synapses. This hypothesis will be tested through...0.05) compared to mice at 7 days (9.6 ± 3.2%) or 30 days post -MPTP (16.5 ± 7.3%). The tail suspension test showed a significant increase in percent of...were compared using one-way analysis of variance (ANOVA), followed by the Fisher post hoc test for comparison of multiple means for the following

ANALYSES OF NEUROBEHAVIORAL SCREENING DATA: BENCHMARK DOSE ESTIMATION.

EPA Science Inventory

Analysis of neurotoxicological screening data such as those of the functional observational battery (FOB) traditionally relies on analysis of variance (ANOVA) with repeated measurements, followed by determination of a no-adverse-effect level (NOAEL). The US EPA has proposed the ...

Asymmetric training using virtual reality reflection equipment and the enhancement of upper limb function in stroke patients: a randomized controlled trial.

PubMed

Lee, DongJin; Lee, MyungMo; Lee, KyoungJin; Song, ChangHo

2014-07-01

Asymmetric movements with both hands contributed to the improvement of spatially coupled motion. Thus, the aim of this study was to investigate the effects of an asymmetric training program using virtual reality reflection equipment on upper limb function in stroke patients. Twenty-four stroke patients were randomly allocated to an experimental group (n=12) or a control group (n=12). Both groups participated in conventional physical therapy for 2×30 min/d, 5 d/wk, for 4 weeks. The experimental group also participated in an asymmetric training program using virtual reality reflection equipment, and the control group participated in a symmetric training program. Both asymmetric and symmetric programs were conducted for 30 min/d, 5 d/wk, for 4 weeks. To compare upper limb function before and after intervention, the Fugl-Meyer Assessment (FMA), the Box and Block Test (BBT), grip strength, range of motion (ROM), and spasticity were assessed. Both groups showed significant increases in upper limb function, excepting spasticity, after intervention (P<.05, 1-way repeated-measures analysis of variance [ANOVA]). A significant group-time interaction was demonstrated only for shoulder/elbow/wrist items of FMA, BBT, grip strength, and ROM of wrist flexion, extension, and ulnar deviation (P<.05, 2-way repeated-measures ANOVA). This study confirms that the asymmetric training program using virtual reality reflection equipment is an effective intervention method for improving upper limb function in stroke patients. We consider that an additional study based on a program using virtual reflection, which is more functional than performing simple tasks, and consisting of tasks relevant to the activities of daily living be conducted. Copyright © 2014 National Stroke Association. Published by Elsevier Inc. All rights reserved.

'Non-hypotensive' hypovolaemia reduces ascending aortic dimensions in humans

NASA Technical Reports Server (NTRS)

Taylor, J. A.; Halliwill, J. R.; Brown, T. E.; Hayano, J.; Eckberg, D. L.

1995-01-01

1. The notion that small, 'non-hypotensive' reductions of effective blood volume alter neither arterial pressure nor arterial baroreceptor activity is pervasive in the experimental literature. We tested two hypotheses: (a) that minute arterial pressure and cardiac autonomic outflow changes during hypovolaemia induced by lower body suction in humans are masked by alterations in breathing, and (b) that evidence for arterial baroreflex engagement might be obtained from measurements of thoracic aorta dimensions. 2. In two studies, responses to graded lower body suction at 0 (control), 5, 10, 15, 20 and 40 mmHg were examined in twelve and ten healthy young men, respectively. In the first, arterial pressure (photoplethysmograph), R-R interval, and respiratory sinus arrhythmia amplitude (complex demodulation) were measured during uncontrolled and controlled breathing (constant breathing frequency and tidal volume). In the second, cross-sectional areas of the ascending thoracic aorta were calculated from nuclear magnetic resonance images. 3. Lower body suction with controlled breathing resulted in an increased arterial pulse pressure at mild levels (5-20 mmHg; ANOVA, P < 0.05) and a decreased arterial pulse pressure at moderate levels (40 mmHg; ANOVA, P < 0.05). Both R-R intervals and respiratory sinus arrhythmia were negatively related to lower body suction level, whether group averages (general linear regression, r > 0.92) or individual subjects (orthogonal polynomials, 12 of 12 subjects) were assessed. 4. Aortic pulse area decreased progressively and significantly during mild lower body suction, with 47% of the total decline occurring by 5 mmHg. 5. These results suggest that small reductions of effective blood volume reduce aortic baroreceptive areas and trigger haemodynamic adjustments which are so efficient that alterations in arterial pressure escape detection by conventional means.

On-Site Pilot Study - Removal of Uranium, Radium-226 and Arsenic from Impacted Leachate by Reverse Osmosis - 13155

DOE Office of Scientific and Technical Information (OSTI.GOV)

McMurray, Allan; Everest, Chris; Rilling, Ken

Conestoga-Rovers and Associates (CRA-LTD) performed an on-site pilot study at the Welcome Waste Management Facility in Port Hope, Ontario, Canada, to evaluate the effectiveness of a unique leachate treatment process for the removal of radioactive contaminants from leachate impacted by low-level radioactive waste. Results from the study also provided the parameters needed for the design of the CRA-LTD full scale leachate treatment process design. The final effluent water quality discharged from the process to meet the local surface water discharge criteria. A statistical software package was utilized to obtain the analysis of variance (ANOVA) for the results from design ofmore » experiment applied to determine the effect of the evaluated factors on the measured responses. The factors considered in the study were: percent of reverse osmosis permeate water recovery, influent coagulant dosage, and influent total dissolved solids (TDS) dosage. The measured responses evaluated were: operating time, average specific flux, and rejection of radioactive contaminants along with other elements. The ANOVA for the design of experiment results revealed that the operating time is affected by the percent water recovery to be achieved and the flocculant dosage over the range studied. The average specific flux and rejection for the radioactive contaminants were not affected by the factors evaluated over the range studied. The 3 month long on-site pilot testing on the impacted leachate revealed that the CRA-LTD leachate treatment process was robust and produced an effluent water quality that met the surface water discharge criteria mandated by the Canadian Nuclear Safety Commission and the local municipality. (authors)« less

Marginal and internal fit of cobalt-chromium copings fabricated using the conventional and the direct metal laser sintering techniques: A comparative in vitro study.

PubMed

Ullattuthodi, Sujana; Cherian, Kandathil Phillip; Anandkumar, R; Nambiar, M Sreedevi

2017-01-01

This in vitro study seeks to evaluate and compare the marginal and internal fit of cobalt-chromium copings fabricated using the conventional and direct metal laser sintering (DMLS) techniques. A master model of a prepared molar tooth was made using cobalt-chromium alloy. Silicone impression of the master model was made and thirty standardized working models were then produced; twenty working models for conventional lost-wax technique and ten working models for DMLS technique. A total of twenty metal copings were fabricated using two different production techniques: conventional lost-wax method and DMLS; ten samples in each group. The conventional and DMLS copings were cemented to the working models using glass ionomer cement. Marginal gap of the copings were measured at predetermined four points. The die with the cemented copings are standardized-sectioned with a heavy duty lathe. Then, each sectioned samples were analyzed for the internal gap between the die and the metal coping using a metallurgical microscope. Digital photographs were taken at ×50 magnification and analyzed using measurement software. Statistical analysis was done by unpaired t -test and analysis of variance (ANOVA). The results of this study reveal that no significant difference was present in the marginal gap of conventional and DMLS copings ( P > 0.05) by means of ANOVA. The mean values of internal gap of DMLS copings were significantly greater than that of conventional copings ( P < 0.05). Within the limitations of this in vitro study, it was concluded that the internal fit of conventional copings was superior to that of the DMLS copings. Marginal fit of the copings fabricated by two different techniques had no significant difference.

Nasal airway and septal variation in unilateral and bilateral cleft lip and palate.

PubMed

Starbuck, John M; Friel, Michael T; Ghoneima, Ahmed; Flores, Roberto L; Tholpady, Sunil; Kula, Katherine

2014-10-01

Cleft lip and palate (CLP) affects the dentoalveolar and nasolabial facial regions. Internal and external nasal dysmorphology may persist in individuals born with CLP despite surgical interventions. 7-18 year old individuals born with unilateral and bilateral CLP (n = 50) were retrospectively assessed using cone beam computed tomography. Anterior, middle, and posterior nasal airway volumes were measured on each facial side. Septal deviation was measured at the anterior and posterior nasal spine, and the midpoint between these two locations. Data were evaluated using principal components analysis (PCA), multivariate analysis of variance (MANOVA), and post-hoc ANOVA tests. PCA results show partial separation in high dimensional space along PC1 (48.5% variance) based on age groups and partial separation along PC2 (29.8% variance) based on CLP type and septal deviation patterns. MANOVA results indicate that age (P = 0.007) and CLP type (P ≤ 0.001) significantly affect nasal airway volume and septal deviation. ANOVA results indicate that anterior nasal volume is significantly affected by age (P ≤ 0.001), whereas septal deviation patterns are significantly affected by CLP type (P ≤ 0.001). Age and CLP type affect nasal airway volume and septal deviation patterns. Nasal airway volumes tend to be reduced on the clefted sides of the face relative to non-clefted sides of the face. Nasal airway volumes tend to strongly increase with age, whereas septal deviation values tend to increase only slightly with age. These results suggest that functional nasal breathing may be impaired in individuals born with the unilateral and bilateral CLP deformity. © 2014 Wiley Periodicals, Inc.

Effects of reward and punishment on task performance, mood and autonomic nervous function, and the interaction with personality.

PubMed

Sakuragi, Sokichi; Sugiyama, Yoshiki

2009-06-01

The effects of reward and punishment are different, and there are individual differences in sensitivity to reward and punishment. The purpose of this study was to investigate the effects of reward and punishment on task performance, mood, and autonomic nervous function, along with the interaction with personality. Twenty-one healthy female subjects volunteered for the experiment. The task performance was evaluated by required time and total errors while performing a Wisconsin Card Sorting Test. We assessed their personalities using the Minnesota Multiphasic Personality Inventory (MMPI) questionnaire, and mood states by a profile of mood states. Autonomic nervous function was estimated by a spectral analysis of heart rate variability, baroreflex sensitivity, and blood pressure. Repeated measures analysis of variance (ANOVA) revealed significant interaction of condition x time course on mood and autonomic nervous activity, which would indicate a less stressed state under the rewarding condition, but revealed no significant interaction of condition x time course on the task performance. The interactions with personality were further analyzed by repeated measures ANOVA applying the clinical scales of MMPI as independent variables, and significant interactions of condition x time course x Pt (psychasthenia) on task performance, mood, and blood pressure, were revealed. That is, the high Pt group, whose members tend to be sensitive and prone to worry, showed gradual improvement of task performance under the punishing situation with slight increase in systolic blood pressure, while showed no improvement under the rewarding situation with fatigue sense attenuation. In contrast, the low Pt group, whose members tend to be adaptive and self-confident, showed gradual improvement under the rewarding situation. Therefore, we should carefully choose the strategy of reward or punishment, considering the interaction with personality as well as the context in which it is given.