measures of effectiveness: Topics by Science.gov

Sample records for measures of effectiveness

Statistical properties of four effect-size measures for mediation models.

PubMed

Miočević, Milica; O'Rourke, Holly P; MacKinnon, David P; Brown, Hendricks C

2018-02-01

This project examined the performance of classical and Bayesian estimators of four effect size measures for the indirect effect in a single-mediator model and a two-mediator model. Compared to the proportion and ratio mediation effect sizes, standardized mediation effect-size measures were relatively unbiased and efficient in the single-mediator model and the two-mediator model. Percentile and bias-corrected bootstrap interval estimates of ab/s Y , and ab(s X )/s Y in the single-mediator model outperformed interval estimates of the proportion and ratio effect sizes in terms of power, Type I error rate, coverage, imbalance, and interval width. For the two-mediator model, standardized effect-size measures were superior to the proportion and ratio effect-size measures. Furthermore, it was found that Bayesian point and interval summaries of posterior distributions of standardized effect-size measures reduced excessive relative bias for certain parameter combinations. The standardized effect-size measures are the best effect-size measures for quantifying mediated effects.
Faster Hall-Effect Current-Measuring Circuit

NASA Technical Reports Server (NTRS)

Sullender, Craig C.; Johnson, Daniel D.; Walker, Daniel D.

1993-01-01

Current-measuring circuit operates on Hall-effect-sensing and magnetic-field-nulling principles similar to those described in article, "Nulling Hall-Effect Current-Measuring Circuit" (LEW-15023), but simpler and responds faster. Designed without feedback loop, and analog pulse-width-modulated output indicates measured current. Circuit measures current at frequency higher than bandwidth of its Hall-effect sensor.
Methodological challenges surrounding direct-to-consumer advertising research--the measurement conundrum.

PubMed

Hansen, Richard A; Droege, Marcus

2005-06-01

Numerous studies have focused on the impact of direct-to-consumer (DTC) prescription drug advertising on consumer behavior and health outcomes. These studies have used various approaches to assess exposure to prescription drug advertising and to measure the subsequent effects of such advertisements. The objectives of this article are to (1) discuss measurement challenges involved in DTC advertising research, (2) summarize measurement approaches commonly identified in the literature, and (3) discuss contamination, time to action, and endogeneity as specific problems in measurement design and application. We conducted a review of the professional literature to identify illustrative approaches to advertising measurement. Specifically, our review of the literature focused on measurement of DTC advertising exposure and effect. We used the hierarchy-of-effects model to guide our discussion of processing and communication effects. Other effects were characterized as target audience action, sales, market share, and profit. Overall, existing studies have used a variety of approaches to measure advertising exposure and effect, yet the ability of measures to produce a valid and reliable understanding of the effects of DTC advertising can be improved. Our review provides a framework for conceptualizing DTC measurement, and can be used to identify gaps in the literature not sufficiently addressed by existing measures. Researchers should continue to explore correlations between exposure and effect of DTC advertising, but are obliged to improve and validate measurement in this area.
Measurement in Comparative Effectiveness Research

PubMed Central

Chubak, Jessica; Rutter, Carolyn M.; Kamineni, Aruna; Johnson, Eric A.; Stout, Natasha K.; Weiss, Noel S.; Doria-Rose, V. Paul; Doubeni, Chyke A.; Buist, Diana S.M.

2013-01-01

Comparative effectiveness research (CER) on preventive services can shape policy and help patients, their providers, and public health practitioners select regimens and programs for disease prevention. Patients and providers need information about the relative effectiveness of various regimens they may choose. Decision makers need information about the relative effectiveness of various programs to offer or recommend. The goal of this paper is to define and differentiate measures of relative effectiveness of regimens and programs for disease prevention. Cancer screening is used to demonstrate how these measures differ in an example of two hypothetic screening regimens and programs. Conceptually and algebraically defined measures of relative regimen and program effectiveness are also presented. The measures evaluate preventive services that range from individual tests through organized, population-wide prevention programs. Examples illustrate how effective screening regimens may not result in effective screening programs and how measures can vary across subgroups and settings. Both regimen and program relative effectiveness measures assess benefits of prevention services in real-world settings, but each addresses different scientific and policy questions. As the body of CER grows, a common lexicon for various measures of relative effectiveness becomes increasingly important to facilitate communication and shared understanding among researchers, healthcare providers, patients, and policymakers. PMID:23597816
A Proposal of a Method to Measure and Evaluate the Effect to Apply External Support Measures for Owners by Construction Management Method, etc

NASA Astrophysics Data System (ADS)

Tada, Hiroshi; Miyatake, Ichiro; Mouri, Junji; Ajiki, Norihiko; Fueta, Toshiharu

In Japan, various approaches have been taken to ensure the quality of public works or to support the procurement regime of the governmental agencies, as a means to utilize external resources, which include the procurement support service or the construction management (CM) method. Although discussions on these measures to utilize external resources (hereinafter referred to as external support measure) have been going on, as well as the follow-up surveys showing the positive effects of such measures have been conducted, the surveys only deal with the matters concerning the overall effects of the external support measure on the whole, meaning that the effect of each item of the tasks have not been addressed, and that the extent it dealt with the expectations of the client is unknown. However, the effective use of the external support measure in future cannot be achieved without knowing what was the purpose to introduce the external support measure, and what effect was expected on each task item, and what extent the expectation fulfilled. Furthermore, it is important to clarify not only the effect as compared to the client's expectation (performance), but also the public benefit of this measure (value improvement). From this point of view, there is not an established method to figure out the effect of the client's measure to utilize external resources. In view of this background, this study takes the CM method as an example of the external support measure, and proposes a method to measure and evaluate the effect by each task item, and suggests the future issues and possible responses, in the aim of contributing the promotion, improvement, and proper implementation of the external support measures in future.
Unmanned tactical autonomous control and collaboration (utacc) human machine integration measures of performance and measures of effectiveness

DTIC Science & Technology

2017-06-01

AUTONOMOUS CONTROL AND COLLABORATION (UTACC) HUMAN-MACHINE INTEGRATION MEASURES OF PERFORMANCE AND MEASURES OF EFFECTIVENESS by Thomas A...TACTICAL AUTONOMOUS CONTROL AND COLLABORATION (UTACC) HUMAN-MACHINE INTEGRATION MEASURES OF PERFORMANCE AND MEASURES OF EFFECTIVENESS 5. FUNDING...Tactical Autonomous Control and Collaboration (UTACC) program seeks to integrate Marines and autonomous machines to address the challenges encountered in
Measurement in comparative effectiveness research.

PubMed

Chubak, Jessica; Rutter, Carolyn M; Kamineni, Aruna; Johnson, Eric A; Stout, Natasha K; Weiss, Noel S; Doria-Rose, V Paul; Doubeni, Chyke A; Buist, Diana S M

2013-05-01

Comparative effectiveness research (CER) on preventive services can shape policy and help patients, their providers, and public health practitioners select regimens and programs for disease prevention. Patients and providers need information about the relative effectiveness of various regimens they may choose. Decision makers need information about the relative effectiveness of various programs to offer or recommend. The goal of this paper is to define and differentiate measures of relative effectiveness of regimens and programs for disease prevention. Cancer screening is used to demonstrate how these measures differ in an example of two hypothetical screening regimens and programs. Conceptually and algebraically defined measures of relative regimen and program effectiveness also are presented. The measures evaluate preventive services that range from individual tests through organized, population-wide prevention programs. Examples illustrate how effective screening regimens may not result in effective screening programs and how measures can vary across subgroups and settings. Both regimen and program relative effectiveness measures assess benefits of prevention services in real-world settings, but each addresses different scientific and policy questions. As the body of CER grows, a common lexicon for various measures of relative effectiveness becomes increasingly important to facilitate communication and shared understanding among researchers, healthcare providers, patients, and policymakers. Copyright © 2013 American Journal of Preventive Medicine. All rights reserved.
Effects of pretesting implicit self-determined motivation on behavioral engagement: evidence for the mere measurement effect at the implicit level.

PubMed

Keatley, David A; Clarke, David D; Ferguson, Eamonn; Hagger, Martin S

2014-01-01

Research into individuals' intended behavior and performance has traditionally adopted explicitly measured, self-report constructs, and outcomes. More recently, research has shown that completing explicit self-report measures of constructs may effect subsequent behavior, termed the "mere measurement" effect. The aim of the present experiment was to investigate whether implicit measures of motivation showed a similar mere measurement effect on subsequent behavior. It may be the case that measuring the implicit systems affects subsequent implicit interventions (e.g., priming), observable on subsequent behavior. Priming manipulations were also given to participants in order to investigate the interaction between measurement and priming of motivation. Initially, a 2 [implicit association test (IAT: present vs. absent) ×2 (Prime: autonomous vs. absent) and a 2 (IAT: present vs. absent) × 2 (Prime: controlled vs. absent)] between participants designs were conducted, these were them combined into a 2 (IAT: present vs. absent) ×3 (Prime: autonomous vs. controlled vs. absent) between participants design, with attempts at a novel task taken as the outcome measure. Implicit measure completion significantly decreased behavioral engagement. Priming autonomous motivation significantly facilitated, and controlled motivation significantly inhibited performance. Finally, there was a significant implicit measurement × priming interaction, such that priming autonomous motivation only improved performance in the absence of the implicit measure. Overall, this research provides an insight into the effects of implicit measurement and priming of motivation and the combined effect of completing both tasks on behavior.
Nulling Hall-Effect Current-Measuring Circuit

NASA Technical Reports Server (NTRS)

Sullender, Craig C.; Vazquez, Juan M.; Berru, Robert I.

1993-01-01

Circuit measures electrical current via combination of Hall-effect-sensing and magnetic-field-nulling techniques. Known current generated by feedback circuit adjusted until it causes cancellation or near cancellation of magnetic field produced in toroidal ferrite core by current measured. Remaining magnetic field measured by Hall-effect sensor. Circuit puts out analog signal and digital signal proportional to current measured. Accuracy of measurement does not depend on linearity of sensing components.
An analysis of source structure effects in radio interferometry measurements

NASA Technical Reports Server (NTRS)

Thomas, J. B.

1980-01-01

To begin a study of structure effects, this report presents a theoretical framework, proposes an effective position approach to structure corrections based on brightness distribution measurements, and analyzes examples of analytical and measured brightness distributions. Other topics include the effect of the frequency dependence of a brightness distribution on bandwidth synthesis (BWS) delay, the determination of the absolute location of a measured brightness distribution, and structure effects in dual frequency calibration of charged particle delays. For the 10 measured distributions analyzed, it was found that the structure effect in BWS delay at X-band (3.6 cm) can reach 30 cm, but typically falls in the range of 0 to 5 cm. A trial limit equation that is dependent on visibility was successfully tested against the 10 measured brightness distributions (seven sources). If the validity of this particular equation for an upper limit can be established for nearly all sources, the structure effect in BWS delay could be greatly reduced without supplementary measurements of brightness distributions.
Assessing the effectiveness of health care cost containment measures: evidence from the market for rehabilitation care.

PubMed

Ziebarth, Nicolas R

2014-03-01

This study empirically evaluates the effectiveness of different health care cost containment measures. The measures investigated were introduced in Germany in 1997 to reduce moral hazard and public health expenditures in the market for rehabilitation care. Of the analyzed measures, doubling the daily copayments was clearly the most effective cost containment measure, resulting in a reduction in utilization of about [Formula: see text] . Indirect measures such as allowing employers to cut federally mandated sick pay or paid vacation during inpatient post-acute care stays did not significantly reduce utilization. There is evidence neither for adverse health effects nor for substitution effects in terms of more doctor visits.
A meta-analysis of brief alcohol interventions for adolescents and young adults: Variability in effects across alcohol measures

PubMed Central

Tanner-Smith, Emily E.; Risser, Mark D.

2016-01-01

Background Brief alcohol interventions are one approach for reducing drinking among youth, but may vary in effectiveness depending on the type of alcohol assessments used to measure effects. Objectives To conduct a meta-analysis that examined the effectiveness of brief alcohol interventions for adolescents and young adults, with particular emphasis on exploring variability in effects across outcome measurement characteristics. Method Eligible studies were those using an experimental or quasi-experimental design to examine the effects of a brief alcohol intervention on a post-intervention alcohol use measure for youth ages 11–30. A comprehensive literature review identified 190 unique samples that were included in the meta-analysis. Taking a Bayesian approach, we used random-effects multilevel models to estimate the average effect and model variability across outcome measurement types. Results Brief alcohol interventions led to significant reductions in self-reported alcohol use among adolescents ( g¯ = 0.25, 95% CrI [0.13, 0.37]) and young adults ( g¯ = 0.15, 95% CrI [0.12, 0.18]). These results were consistent across outcomes with varying reference periods, but varied across outcome construct type and assessment instruments. Among adolescents, effects were larger when measured using the Timeline Followback; among young adults, effects were smaller when measured using the Alcohol Use Disorders Identification Test. Conclusion The strength of the beneficial effects of brief alcohol interventions on youth’s alcohol use may vary depending upon the outcome measure utilized. Nevertheless, significant effects were observed across measures. Although effects were modest in size, they were clinically significant and show promise for interrupting problematic alcohol use trajectories among youth. PMID:26905387
To what extent can theory account for the findings of road safety evaluation studies?

PubMed

Elvik, Rune

2004-09-01

This paper proposes a conceptual framework that can be used to assess to what extent the findings of road safety evaluation research make sense from a theoretical point of view. The effects of road safety measures are modelled as passing through two causal chains. One of these, termed the engineering effect, refers to the intended effects of a road safety measure on a set of risk factors related to accident occurrence or injury severity. The engineering effect of road safety measures is modelled in terms of nine basic risk factors, one or more of which any road safety measure needs to influence in order to have the intended effect on accidents or injuries. The other causal chain producing the effects of road safety measures is termed the behavioural effect, and refers to road user behavioural adaptations to road safety measures. The behavioural effect is related to the engineering effect, in the sense that certain properties of the engineering effect of a road safety measure influence the likelihood that behavioural adaptation will occur. The behavioural effect of a road safety measure is modelled in terms of six factors that influence the likelihood that behavioural adaptation will occur. The nine basic risk factors representing the engineering effect of a road safety measure, and the six factors influencing the likelihood of behavioural adaptation can be used as checklists in assessing whether or not the findings of road safety evaluation studies make sense from a theoretical point of view. At the current state of knowledge, a more stringent evaluation of the extent to which theory can explain the findings of road safety evaluation studies is, in most cases, not possible. Copyright 2003 Elsevier Ltd.
The Comparability of the Standardized Mean Difference Effect Size across Different Measures of the Same Construct: Measurement Considerations

ERIC Educational Resources Information Center

Nugent, William R.

2006-01-01

One of the most important effect sizes used in meta-analysis is the standardized mean difference (SMD). In this article, the conditions under which SMD effect sizes based on different measures of the same construct are directly comparable are investigated. The results show that SMD effect sizes from different measures of the same construct are…
A novel measure of effect size for mediation analysis.

PubMed

Lachowicz, Mark J; Preacher, Kristopher J; Kelley, Ken

2018-06-01

Mediation analysis has become one of the most popular statistical methods in the social sciences. However, many currently available effect size measures for mediation have limitations that restrict their use to specific mediation models. In this article, we develop a measure of effect size that addresses these limitations. We show how modification of a currently existing effect size measure results in a novel effect size measure with many desirable properties. We also derive an expression for the bias of the sample estimator for the proposed effect size measure and propose an adjusted version of the estimator. We present a Monte Carlo simulation study conducted to examine the finite sampling properties of the adjusted and unadjusted estimators, which shows that the adjusted estimator is effective at recovering the true value it estimates. Finally, we demonstrate the use of the effect size measure with an empirical example. We provide freely available software so that researchers can immediately implement the methods we discuss. Our developments here extend the existing literature on effect sizes and mediation by developing a potentially useful method of communicating the magnitude of mediation. (PsycINFO Database Record (c) 2018 APA, all rights reserved).
Frequency of streamflow measurements required to determine forest treatment effects

Treesearch

Kenneth G. Reinhart

1964-01-01

Most of the stream-discharge records for our experimental watersheds are taken by continuous measurements. But the question arises: are continuous measurements necessary to determine effects of forest treatments? Or could treatment effects be determined by measurement of discharge at intervals, say, once a day or once a week?
Do Effect-Size Measures Measure up?: A Brief Assessment

ERIC Educational Resources Information Center

Onwuegbuzie, Anthony J.; Levin, Joel R.; Leech, Nancy L.

2003-01-01

Because of criticisms leveled at statistical hypothesis testing, some researchers have argued that measures of effect size should replace the significance-testing practice. We contend that although effect-size measures have logical appeal, they are also associated with a number of limitations that may result in problematic interpretations of them…
Fundamental study on non-invasive blood glucose sensing.

PubMed

Xu, K; Li, Q; Lu, Z; Jiang, J

2002-01-01

Diabetes is a disease which severely threatens the health of human beings. Unfortunately, current monitoring techniques with finger sticks discourage the regular use. Noninvasive spectroscopic measurement of blood glucose is a simple and painless technique, and reduces the long-term health care costs of diabetic patients due to no reagents. It is suitable for home use. Moreover, the establishment of the methodology not only applies to blood glucose noninvasive measurement, but also can be extended to noninvasive measurement of other analytes in body fluid, which will be of important significance for the development of the technique of clinical analysis. In this paper, some fundamental researches, which have been achieved in our laboratory in the field of non-invasive blood glucose measurement, were introduced. 1. Fundamental research was done for the glucose concentrations from simple to complex samples with near and middle infrared spectroscopy: (1) the relationship between the instrument precision and prediction accuracy of the glucose measurement; (2) the change of the result of the quantitative measurement with the change of the complexity of samples; (3) the attempt of increasing the prediction accuracy of the glucose measurement by improving the methods of modeling. The research results showed that it is feasible for non-invasive blood glucose measurement with near and middle infrared spectroscopy in theory, and the experimental results, from simple to complex samples, proved that it is effective for the methodology consisting of hardware and software. 2. According to the characteristics of human body measurement, the effects of measuring conditions on measurement results, such as: (1) the effect of measurement position; (2) the effect of measurement pressure; (3) the effect of measurement site; (4) the effect of measured individual, were investigated. With the fundamental researches, the special problems of human body measurement were solved. In addition, the practical and effective method of noninvasive human blood glucose measurement was proposed.
Regular Gleason Measures and Generalized Effect Algebras

NASA Astrophysics Data System (ADS)

Dvurečenskij, Anatolij; Janda, Jiří

2015-12-01

We study measures, finitely additive measures, regular measures, and σ-additive measures that can attain even infinite values on the quantum logic of a Hilbert space. We show when particular classes of non-negative measures can be studied in the frame of generalized effect algebras.
Effects of macroscopic inhomogeneities on resistive and Hall measurements on crosses, cloverleafs, and bars

NASA Astrophysics Data System (ADS)

Koon, D. W.; Knickerbocker, C. J.

1996-12-01

The effect of macroscopic inhomogeneities on resistivity and Hall angle measurements is studied by calculating weighting functions (the relative effect of perturbations in a local transport property on the measured global average for the object) for cross, cloverleaf, and bar-shaped geometries. The ``sweet spot,'' the region in the center of the object that the measurement effectively samples, is smaller for crosses and cloverleafs than for the circles and squares already studied, and smaller for the cloverleaf than for the corresponding cross. Resistivity measurements for crosses and cloverleafs suffer from singularities and negative weighting, which can be eliminated by averaging two independent resistance measurements, as done in the van der Pauw technique. Resistivity and Hall measurements made on sufficiently narrow bars are shown to effectively sample only the region directly between the voltage probes.

Measuring bi-directional current through a field-effect transistor by virtue of drain-to-source voltage measurement

DOEpatents

Turner, Steven Richard

2006-12-26

A method and apparatus for measuring current, and particularly bi-directional current, in a field-effect transistor (FET) using drain-to-source voltage measurements. The drain-to-source voltage of the FET is measured and amplified. This signal is then compensated for variations in the temperature of the FET, which affects the impedance of the FET when it is switched on. The output is a signal representative of the direction of the flow of current through the field-effect transistor and the level of the current through the field-effect transistor. Preferably, the measurement only occurs when the FET is switched on.
Integrated cost-effectiveness analysis of agri-environmental measures for water quality.

PubMed

Balana, Bedru B; Jackson-Blake, Leah; Martin-Ortega, Julia; Dunn, Sarah

2015-09-15

This paper presents an application of integrated methodological approach for identifying cost-effective combinations of agri-environmental measures to achieve water quality targets. The methodological approach involves linking hydro-chemical modelling with economic costs of mitigation measures. The utility of the approach was explored for the River Dee catchment in North East Scotland, examining the cost-effectiveness of mitigation measures for nitrogen (N) and phosphorus (P) pollutants. In-stream nitrate concentration was modelled using the STREAM-N and phosphorus using INCA-P model. Both models were first run for baseline conditions and then their effectiveness for changes in land management was simulated. Costs were based on farm income foregone, capital and operational expenditures. The costs and effects data were integrated using 'Risk Solver Platform' optimization in excel to produce the most cost-effective combination of measures by which target nutrient reductions could be attained at a minimum economic cost. The analysis identified different combination of measures as most cost-effective for the two pollutants. An important aspect of this paper is integration of model-based effectiveness estimates with economic cost of measures for cost-effectiveness analysis of land and water management options. The methodological approach developed is not limited to the two pollutants and the selected agri-environmental measures considered in the paper; the approach can be adapted to the cost-effectiveness analysis of any catchment-scale environmental management options. Copyright © 2015 Elsevier Ltd. All rights reserved.
On the effective point of measurement in megavoltage photon beams.

PubMed

Kawrakow, Iwan

2006-06-01

This paper presents a numerical investigation of the effective point of measurement of thimble ionization chambers in megavoltage photon beams using Monte Carlo simulations with the EGSNRC system. It is shown that the effective point of measurement for relative photon beam dosimetry depends on every detail of the chamber design, including the cavity length, the mass density of the wall material, and the size of the central electrode, in addition to the cavity radius. Moreover, the effective point of measurement also depends on the beam quality and the field size. The paper therefore argues that the upstream shift of 0.6 times the cavity radius, recommended in current dosimetry protocols, is inadequate for accurate relative photon beam dosimetry, particularly in the build-up region. On the other hand, once the effective point of measurement is selected appropriately, measured depth-ionization curves can be equated to measured depth-dose curves for all depths within +/- 0.5%.
Combined effects of prevention and quarantine on a breakout in SIR model.

PubMed

Kato, Fuminori; Tainaka, Kei-Ichi; Sone, Shogo; Morita, Satoru; Iida, Hiroyuki; Yoshimura, Jin

2011-01-01

Recent breakouts of several epidemics, such as flu pandemics, are serious threats to human health. The measures of protection against these epidemics are urgent issues in epidemiological studies. Prevention and quarantine are two major approaches against disease spreads. We here investigate the combined effects of these two measures of protection using the SIR model. We use site percolation for prevention and bond percolation for quarantine applying on a lattice model. We find a strong synergistic effect of prevention and quarantine under local interactions. A slight increase in protection measures is extremely effective in the initial disease spreads. Combination of the two measures is more effective than a single protection measure. Our results suggest that the protection policy against epidemics should account for both prevention and quarantine measures simultaneously.
Note: Comparison experimental results of the laser heterodyne interferometer for angle measurement based on the Faraday effect.

PubMed

Zhang, Enzheng; Chen, Benyong; Zheng, Hao; Teng, Xueying; Yan, Liping

2018-04-01

A laser heterodyne interferometer for angle measurement based on the Faraday effect is proposed. A novel optical configuration, designed by using the orthogonal return method for a linearly polarized beam based on the Faraday effect, guarantees that the measurement beam can return effectively even though an angular reflector has a large lateral displacement movement. The optical configuration and measurement principle are presented in detail. Two verification experiments were performed; the experimental results show that the proposed interferometer can achieve a large lateral displacement tolerance of 7.4 mm and also can realize high precision angle measurement with a large measurement range.
Note: Comparison experimental results of the laser heterodyne interferometer for angle measurement based on the Faraday effect

NASA Astrophysics Data System (ADS)

Zhang, Enzheng; Chen, Benyong; Zheng, Hao; Teng, Xueying; Yan, Liping

2018-04-01

A laser heterodyne interferometer for angle measurement based on the Faraday effect is proposed. A novel optical configuration, designed by using the orthogonal return method for a linearly polarized beam based on the Faraday effect, guarantees that the measurement beam can return effectively even though an angular reflector has a large lateral displacement movement. The optical configuration and measurement principle are presented in detail. Two verification experiments were performed; the experimental results show that the proposed interferometer can achieve a large lateral displacement tolerance of 7.4 mm and also can realize high precision angle measurement with a large measurement range.
Operational Contract Support: Economic Impact Evaluation and Measures of Effectiveness

DTIC Science & Technology

2017-12-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT OPERATIONAL CONTRACT SUPPORT: ECONOMIC IMPACT EVALUATION AND MEASURES...DATES COVERED MBA professional report 4. TITLE AND SUBTITLE OPERATIONAL CONTRACT SUPPORT: ECONOMIC IMPACT EVALUATION AND MEASURES OF EFFECTIVENESS 5...evaluation, expeditionary economics , operational contract support, measure of effectiveness 15. NUMBER OF PAGES 89 16. PRICE CODE 17. SECURITY
Measuring Effect Sizes: The Effect of Measurement Error. Working Paper 19

ERIC Educational Resources Information Center

Boyd, Donald; Grossman, Pamela; Lankford, Hamilton; Loeb, Susanna; Wyckoff, James

2008-01-01

Value-added models in education research allow researchers to explore how a wide variety of policies and measured school inputs affect the academic performance of students. Researchers typically quantify the impacts of such interventions in terms of "effect sizes", i.e., the estimated effect of a one standard deviation change in the…
Exploring expert opinion on the practicality and effectiveness of biosecurity measures on dairy farms in the United Kingdom using choice modeling.

PubMed

Shortall, Orla; Green, Martin; Brennan, Marnie; Wapenaar, Wendela; Kaler, Jasmeet

2017-03-01

Biosecurity, defined as a series of measures aiming to stop disease-causing agents entering or leaving an area where farm animals are present, is very important for the continuing economic viability of the United Kingdom dairy sector, and for animal welfare. This study gathered expert opinion from farmers, veterinarians, consultants, academics, and government and industry representatives on the practicality and effectiveness of different biosecurity measures on dairy farms. The study used best-worst scaling, a technique that allows for greater discrimination between choices and avoids the variability in interpretation associated with other methods, such as Likert scales and ranking methods. Keeping a closed herd was rated as the most effective measure overall, and maintaining regular contact with the veterinarian was the most practical measure. Measures relating to knowledge, planning, and veterinary involvement; buying-in practices; and quarantine and treatment scored highly for effectiveness overall. Measures relating to visitors, equipment, pest control, and hygiene scored much lower for effectiveness. Overall, measures relating to direct animal-to-animal contact scored much higher for effectiveness than measures relating to indirect disease transmission. Some of the most effective measures were also rated as the least practical, such as keeping a closed herd and avoiding nose-to-nose contact between contiguous animals, suggesting that real barriers exist for farmers when implementing biosecurity measures on dairy farms. We observed heterogeneity in expert opinion on biosecurity measures; for example, veterinarians rated the effectiveness of consulting the veterinarian on biosecurity significantly more highly than dairy farmers, suggesting a greater need for veterinarians to promote their services on-farm. Still, both groups rated it as a practical measure, suggesting that the farmer-veterinarian relationship holds some advantages for the promotion of biosecurity. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Evaluating the effectiveness of using electroencephalogram power indices to measure visual fatigue.

PubMed

Hsu, Bin-Wei; Wang, Mao-Jiun J

2013-02-01

Electroencephalography (EEG) is widely used in cognitive and behavioral research. This study evaluates the effectiveness of using the EEG power index to measure visual fatigue. Three common visual fatigue measures, critical-flicker fusion (CFF), near-point accommodation (NPA), and subjective eye-fatigue rating, were used for comparison. The study participants were 20 men with a mean age of 20.4 yr. (SD = 1.5). The experimental task was a car-racing video game. Results indicated that the EEG power indices were valid as a visual fatigue measure and the sensitivity of the objective measures (CFF and EEG power index) was higher than the subjective measure. The EEG beta and EEG alpha were effective for measuring visual fatigue in short- and long-duration tasks, respectively. EEG beta/alpha were the most effective power indexes for the visual fatigue measure.
The other half of the story: effect size analysis in quantitative research.

PubMed

Maher, Jessica Middlemis; Markey, Jonathan C; Ebert-May, Diane

2013-01-01

Statistical significance testing is the cornerstone of quantitative research, but studies that fail to report measures of effect size are potentially missing a robust part of the analysis. We provide a rationale for why effect size measures should be included in quantitative discipline-based education research. Examples from both biological and educational research demonstrate the utility of effect size for evaluating practical significance. We also provide details about some effect size indices that are paired with common statistical significance tests used in educational research and offer general suggestions for interpreting effect size measures. Finally, we discuss some inherent limitations of effect size measures and provide further recommendations about reporting confidence intervals.
Food environments and dietary intakes among adults: does the type of spatial exposure measurement matter? A systematic review.

PubMed

Bivoltsis, Alexia; Cervigni, Eleanor; Trapp, Gina; Knuiman, Matthew; Hooper, Paula; Ambrosini, Gina Leslie

2018-06-09

The relationships between food environments and dietary intake have been assessed via a range of methodologically diverse measures of spatial exposure to food outlets, resulting in a largely inconclusive body of evidence, limiting informed policy intervention. This systematic review aims to evaluate the influence of methodological choice on study outcomes by examining the within-study effect of availability (e.g., counts) versus accessibility (e.g., proximity) spatial exposure measures on associations with diet. (PROSPERO registration: CRD42018085250). PubMed, Web of Science, Scopus and ScienceDirect databases were searched for empirical studies from 1980 to 2017, in the English language, involving adults and reporting on the statistical association between a dietary outcome and spatial exposure measures of both availability and accessibility. Studies were appraised using an eight-point quality criteria with a narrative synthesis of results. A total of 205 associations and 44 relationships (i.e., multiple measures of spatial exposure relating to a particular food outlet type and dietary outcome) were extracted from 14 eligible articles. Comparative measures were dominated by counts (availability) and proximity (accessibility). Few studies compared more complex measures and all counts were derived from place-based measures of exposure. Sixteen of the 44 relationships had a significant effect involving an availability measure whilst only 8 had a significant effect from an accessibility measure. The largest effect sizes in relationships were mostly for availability measures. After stratification by scale, availability measure had the greatest effect size in 139 of the 176 pairwise comparisons. Of the 33% (68/205) of associations that reached significance, 53/68 (78%) were from availability measures. There was no relationship between study quality and reported study outcomes. The limited evidence suggests that availability measures may produce significant and greater effect sizes than accessibility measures. However, both availability and accessibility measures may be important concepts of spatial exposure depending on the food outlet type and dietary outcome examined. More studies reporting on multi-method effects are required to differentiate findings by the type of spatial exposure assessment and build an evidence base regarding the appropriateness and robustness of measures under different circumstances.
Temperature-fluctuation-sensitive accumulative effect of the phase measurement errors in low-coherence interferometry in characterizing arrayed waveguide gratings.

PubMed

Zhao, Changyun; Wei, Bing; Yang, Longzhi; Wang, Gencheng; Wang, Yuehai; Jiang, Xiaoqing; Li, Yubo; Yang, Jianyi

2015-09-20

We investigate the accumulative effect of the phase measurement errors in characterizing optical multipath components by low-coherence interferometry. The accumulative effect is caused by the fluctuation of the environment temperature, which leads to the variation of the refractive index of the device under test. The resulting phase measurement errors accumulate with the increasing of the phase difference between the two interferometer arms. Our experiments were carried out to demonstrate that the accumulative effect is still obvious even though the thermo-optical coefficient of the device under test is quite small. Shortening the measurement time to reduce the fluctuation of the environment temperature can effectively restrain the accumulative effect. The experiments show that when the scanning speed increases to 4.8 mm/s, the slope of the phase measurement errors decreases to 5.52×10(-8), which means the accumulative effect can be ignored.
Health economics research into supporting carers of people with dementia: A systematic review of outcome measures

PubMed Central

2012-01-01

Advisory bodies, such as the National Institute for Health and Clinical Excellence (NICE) in the UK, advocate using preference based instruments to measure the quality of life (QoL) component of the quality-adjusted life year (QALY). Cost per QALY is used to determine cost-effectiveness, and hence funding, of interventions. QALYs allow policy makers to compare the effects of different interventions across different patient groups. Generic measures may not be sensitive enough to fully capture the QoL effects for certain populations, such as carers, so there is a need to consider additional outcome measures, which are preference based where possible to enable cost-effectiveness analysis to be undertaken. This paper reviews outcome measures commonly used in health services research and health economics research involving carers of people with dementia. An electronic database search was conducted in PubMed, Medline, the Cumulative Index to Nursing and Allied Health Literature (CINAHL), PsycINFO, the National Health Service Economic Evaluation Database (NHS EED), Database of Abstracts of Reviews of Effects (DARE) and Health Technology Assessment database. Studies were eligible for inclusion if they included an outcome measure for carers of people with dementia. 2262 articles were identified. 455 articles describing 361 studies remained after exclusion criteria were applied. 228 outcome measures were extracted from the studies. Measures were categorised into 44 burden measures, 43 mastery measures, 61 mood measures, 32 QoL measures, 27 social support and relationships measures and 21 staff competency and morale measures. The choice of instrument has implications on funding decisions; therefore, researchers need to choose appropriate instruments for the population being measured and the type of intervention undertaken. If an instrument is not sensitive enough to detect changes in certain populations, the effect of an intervention may be underestimated, and hence interventions which may appear to be beneficial to participants are not deemed cost-effective and are not funded. If this is the case, it is essential that additional outcome measures which detect changes in broader QoL are included, whilst still retaining preference based utility measures such as EQ-5D to allow QALY calculation for comparability with other interventions. PMID:23181515
Health economics research into supporting carers of people with dementia: a systematic review of outcome measures.

PubMed

Jones, Carys; Edwards, Rhiannon Tudor; Hounsome, Barry

2012-11-26

Advisory bodies, such as the National Institute for Health and Clinical Excellence (NICE) in the UK, advocate using preference based instruments to measure the quality of life (QoL) component of the quality-adjusted life year (QALY). Cost per QALY is used to determine cost-effectiveness, and hence funding, of interventions. QALYs allow policy makers to compare the effects of different interventions across different patient groups. Generic measures may not be sensitive enough to fully capture the QoL effects for certain populations, such as carers, so there is a need to consider additional outcome measures, which are preference based where possible to enable cost-effectiveness analysis to be undertaken. This paper reviews outcome measures commonly used in health services research and health economics research involving carers of people with dementia. An electronic database search was conducted in PubMed, Medline, the Cumulative Index to Nursing and Allied Health Literature (CINAHL), PsycINFO, the National Health Service Economic Evaluation Database (NHS EED), Database of Abstracts of Reviews of Effects (DARE) and Health Technology Assessment database. Studies were eligible for inclusion if they included an outcome measure for carers of people with dementia. 2262 articles were identified. 455 articles describing 361 studies remained after exclusion criteria were applied. 228 outcome measures were extracted from the studies. Measures were categorised into 44 burden measures, 43 mastery measures, 61 mood measures, 32 QoL measures, 27 social support and relationships measures and 21 staff competency and morale measures. The choice of instrument has implications on funding decisions; therefore, researchers need to choose appropriate instruments for the population being measured and the type of intervention undertaken. If an instrument is not sensitive enough to detect changes in certain populations, the effect of an intervention may be underestimated, and hence interventions which may appear to be beneficial to participants are not deemed cost-effective and are not funded. If this is the case, it is essential that additional outcome measures which detect changes in broader QoL are included, whilst still retaining preference based utility measures such as EQ-5D to allow QALY calculation for comparability with other interventions.
An Evaluation of the Effectiveness of Televised Locally Oriented Driver Re-Education.

ERIC Educational Resources Information Center

Hutchinson, John W.; And Others

Television, with its ability to reach large audiences, has been used extensively in driver-education efforts but its effectiveness has never been measured. The purpose of this research was to measure the effectiveness of a televised, locally oriented, candid camera type of driver reeducation program. The measures of effectiveness included a study…
Working with Teachers to Develop Fair and Reliable Measures of Effective Teaching. MET Project

ERIC Educational Resources Information Center

Bill & Melinda Gates Foundation, 2010

2010-01-01

In fall 2009, the Bill & Melinda Gates Foundation launched the Measures of Effective Teaching (MET) project to develop and test multiple measures of teacher effectiveness. The goal of the MET project is to improve the quality of information about teaching effectiveness available to education professionals within states and districts--information…
48 CFR 4.602 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., and the general public; (2) A means of measuring and assessing the effect of Federal contracting on... means of measuring and assessing the effect of Federal contracting for promoting sustainable... measuring and assessing the effect of other policy and management initiatives (e.g., performance based...
48 CFR 4.602 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., and the general public; (2) A means of measuring and assessing the effect of Federal contracting on... means of measuring and assessing the effect of Federal contracting for promoting sustainable... measuring and assessing the effect of other policy and management initiatives (e.g., performance based...
Quantum Zeno Effect in the Measurement Problem

NASA Technical Reports Server (NTRS)

Namiki, Mikio; Pasaczio, Saverio

1996-01-01

Critically analyzing the so-called quantum Zeno effect in the measurement problem, we show that observation of this effect does not necessarily mean experimental evidence for the naive notion of wave-function collapse by measurement (the simple projection rule). We also examine what kind of limitation the uncertainty relation and others impose on the observation of the quantum Zeno effect.

Learning about Teaching: Initial Findings from the Measures of Effective Teaching Project. Research Paper. MET Project

ERIC Educational Resources Information Center

Bill & Melinda Gates Foundation, 2010

2010-01-01

In fall 2009, the Bill & Melinda Gates Foundation launched the Measures of Effective Teaching (MET) project to test new approaches to measuring effective teaching. The goal of the MET project is to improve the quality of information about teaching effectiveness available to education professionals within states and districts--information that…
On the Foundation of Evaluation.

ERIC Educational Resources Information Center

Shaw, W. M., Jr.

1986-01-01

The derivation of a general retrieval effectiveness measure is investigated. Inconsistencies in the definition of relative importance are resolved, and it is shown that the influence of the assigned weight on the effectiveness measure can produce counterintuitive results. An alternative effectiveness measure provided by the Marczewski-Steinhaus…
Evaluating the effectiveness of flood damage mitigation measures by the application of Propensity Score Matching

NASA Astrophysics Data System (ADS)

Hudson, P.; Botzen, W. J. W.; Kreibich, H.; Bubeck, P.; Aerts, J. C. J. H.

2014-01-01

The employment of damage mitigation measures by individuals is an important component of integrated flood risk management. In order to promote efficient damage mitigation measures, accurate estimates of their damage mitigation potential are required. That is, for correctly assessing the damage mitigation measures' effectiveness from survey data, one needs to control for sources of bias. A biased estimate can occur if risk characteristics differ between individuals who have, or have not, implemented mitigation measures. This study removed this bias by applying an econometric evaluation technique called Propensity Score Matching to a survey of German households along along two major rivers major rivers that were flooded in 2002, 2005 and 2006. The application of this method detected substantial overestimates of mitigation measures' effectiveness if bias is not controlled for, ranging from nearly € 1700 to € 15 000 per measure. Bias-corrected effectiveness estimates of several mitigation measures show that these measures are still very effective since they prevent between € 6700-14 000 of flood damage. This study concludes with four main recommendations regarding how to better apply Propensity Score Matching in future studies, and makes several policy recommendations.
Evaluating the effectiveness of flood damage mitigation measures by the application of propensity score matching

NASA Astrophysics Data System (ADS)

Hudson, P.; Botzen, W. J. W.; Kreibich, H.; Bubeck, P.; Aerts, J. C. J. H.

2014-07-01

The employment of damage mitigation measures (DMMs) by individuals is an important component of integrated flood risk management. In order to promote efficient damage mitigation measures, accurate estimates of their damage mitigation potential are required. That is, for correctly assessing the damage mitigation measures' effectiveness from survey data, one needs to control for sources of bias. A biased estimate can occur if risk characteristics differ between individuals who have, or have not, implemented mitigation measures. This study removed this bias by applying an econometric evaluation technique called propensity score matching (PSM) to a survey of German households along three major rivers that were flooded in 2002, 2005, and 2006. The application of this method detected substantial overestimates of mitigation measures' effectiveness if bias is not controlled for, ranging from nearly EUR 1700 to 15 000 per measure. Bias-corrected effectiveness estimates of several mitigation measures show that these measures are still very effective since they prevent between EUR 6700 and 14 000 of flood damage per flood event. This study concludes with four main recommendations regarding how to better apply propensity score matching in future studies, and makes several policy recommendations.
From local to global measurements of nonclassical nonlinear elastic effects in geomaterials

DOE PAGES

Lott, Martin; Remillieux, Marcel C.; Le Bas, Pierre-Yves; ...

2016-09-07

Here, the equivalence between local and global measures of nonclassical nonlinear elasticity is established in a slender resonant bar. Nonlinear effects are first measured globally using nonlinear resonance ultrasound spectroscopy (NRUS), which monitors the relative shift of the resonance frequency as a function of the maximum dynamic strain in the sample. Subsequently, nonlinear effects are measured locally at various positions along the sample using dynamic acousto elasticity testing (DAET). Finally, after correcting analytically the DAET data for three-dimensional strain effects and integrating numerically these corrected data along the length of the sample, the NRUS global measures are retrieved almost exactly.
The effects of gender, flow and video game experience on combat identification training.

PubMed

Plummer, John Paul; Schuster, David; Keebler, Joseph R

2017-08-01

The present study examined the effects of gender, video game experience (VGE), and flow state on multiple indices of combat identification (CID) performance. Individuals were trained on six combat vehicles in a simulation, presented through either a stereoscopic or non-stereoscopic display. Participants then reported flow state, VGE and were tested on their ability to discriminate friend vs. foe and identify both pictures and videos of the trained vehicles. The effect of stereoscopy was not significant. There was an effect of gender across three dependent measures. For the two picture-based measures, the effect of gender was mediated by VGE. Additionally, the effect of gender was moderated by flow state on the identification measures. Overall, the study suggests that gender differences may be overcome by VGE and by achieving flow state. Selection based on these individual differences may be useful for future military simulation. Practitioner Summary: This work investigates the effect of gender, VGE and flow state on CID performance. For three measures of performance, there was a main effect of gender. Gender was mediated by previous VGE on two measures, and gender was moderated by flow state on two measures.
Research on the measurement technology of effective arm length of swing arm profilometer

NASA Astrophysics Data System (ADS)

Chen, Lin; Jing, Hongwei; Wei, Zhongwei; Li, Jie; Cao, Xuedong

2014-09-01

When the swing arm profilometer(SAP) measuring the mirror, the effective arm length of SAP which haves an obvious influence on the measurement results of the mirror surface shape needs to be measured accurately. It requires the measurement uncertainty of the effective arm length to reach 10μm in order to meet the measurement requirements, in this paper, we present a kind of technology based on laser tracker to measure the effective arm length of SAP. When the swing arm rotates around the shaft axis of swing arm rotary stage, the probe and two laser tracker balls form three sections of circular arc around the shaft axis of swing arm rotary stage in space. Laser tracker tracks and measures the circular arcs of two laser tracker balls, the center coordinates of the circular plane of circular arc can be calculated by data processing. The linear equation that passes through the two center coordinates is the equation of the shaft axis of rotary stage, the vertical distance from the probe to the shaft axis of rotary stage which can be calculated refer to the equation from the point to the line is the effective arm length. After Matlab simulation, this measurement method can meet the measurement accuracy.
Effect Size Measures for Differential Item Functioning in a Multidimensional IRT Model

ERIC Educational Resources Information Center

Suh, Youngsuk

2016-01-01

This study adapted an effect size measure used for studying differential item functioning (DIF) in unidimensional tests and extended the measure to multidimensional tests. Two effect size measures were considered in a multidimensional item response theory model: signed weighted P-difference and unsigned weighted P-difference. The performance of…
Assessing Organizational Effectiveness: The Role of Performance Measures

ERIC Educational Resources Information Center

Matthews, Joseph R.

2011-01-01

A brief overview of the challenges associated with demonstrating organizational effectiveness and the role of performance measures as surrogates for demonstrating effectiveness are provided. The complexity of analysis and the importance of use of performance measures provide a way to review the strengths and weakness of eight different ways to…
48 CFR 4.602 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., and the general public; (2) A means of measuring and assessing the effect of Federal contracting on... Severely Disabled, are sharing in Federal contracts; (3) A means of measuring and assessing the effect of... sustainable acquisition; and (4) A means of measuring and assessing the effect of other policy and management...
A meta-analysis of the effects of measuring theory of planned behaviour constructs on behaviour within prospective studies.

PubMed

Mankarious, Evon; Kothe, Emily

2015-01-01

Measurement reactivity effects, such as the mere measurement effect, have been proposed as a reason for behavioural changes in a number of theory of planned behaviour intervention studies. However, it is unclear whether such changes are the result of the mere measurement effect or of other artefacts of intervention study design. The aim of this study is to determine the size and direction of changes in health behaviours from baseline to follow-up in prospective studies using the theory of planned behaviour. Electronic databases were searched for the theory of planned behaviour studies which measured health behaviours at two or more time points. Change in behaviour was calculated for all studies. Sixty-six studies were included. Mean effect sizes across all studies were small and negative (d = -.03). Effect size was moderated by behaviour, behaviour type and follow-up length. Subgroup analyses showed significant decreases in socially undesirable behaviour (d = -.28), binge drinking (d = -.17), risk driving (d = -.20), sugar snack consumption (d = -.43) and sun-protective behaviour (d = -.18). Measurement of intention at baseline resulted in significant decreases in undesirable behaviour. Changes in undesirable behaviours reported in other studies may be the result of the mere measurement effect.
Using the Rasch Measurement Model in Psychometric Analysis of the Family Effectiveness Measure

PubMed Central

McCreary, Linda L.; Conrad, Karen M.; Conrad, Kendon J.; Scott, Christy K; Funk, Rodney R.; Dennis, Michael L.

2013-01-01

Background Valid assessment of family functioning can play a vital role in optimizing client outcomes. Because family functioning is influenced by family structure, socioeconomic context, and culture, existing measures of family functioning--primarily developed with nuclear, middle class European American families--may not be valid assessments of families in diverse populations. The Family Effectiveness Measure was developed to address this limitation. Objectives To test the Family Effectiveness Measure with data from a primarily low-income African American convenience sample, using the Rasch measurement model. Method A sample of 607 adult women completed the measure. Rasch analysis was used to assess unidimensionality, response category functioning, item fit, person reliability, differential item functioning by race and parental status, and item hierarchy. Criterion-related validity was tested using correlations with five other variables related to family functioning. Results The Family Effectiveness Measure measures two separate constructs: The effective family functioning construct was a psychometrically sound measure of the target construct that was more efficient due to the deletion of 22 items. The ineffective family functioning construct consisted of 16 of those deleted items but was not as strong psychometrically. Items in both constructs evidenced no differential item functioning by race. Criterion-related validity was supported for both. Discussion In contrast to the prevailing conceptualization that family functioning is a single construct, assessed by positively and negatively worded items, use of the Rasch analysis suggested the existence of two constructs. While the effective family functioning is a strong and efficient measure of family functioning, the ineffective family functioning will require additional item development and psychometric testing. PMID:23636342
77 FR 51762 - Proposed Information Collection; Comment Request; Economic Surveys for U.S. Commercial Fisheries

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-27

... through primary processing; (2) to analyze the economic performance effects of current management measures; and (3) to analyze the economic performance effects of alternative management measures. The measures... used to track economic performance and to evaluate the economic effects of alternative management...
Grey signal processing and data reconstruction in the non-diffracting beam triangulation measurement system

NASA Astrophysics Data System (ADS)

Meng, Hao; Wang, Zhongyu; Fu, Jihua

2008-12-01

The non-diffracting beam triangulation measurement system possesses the advantages of longer measurement range, higher theoretical measurement accuracy and higher resolution over the traditional laser triangulation measurement system. Unfortunately the measurement accuracy of the system is greatly degraded due to the speckle noise, the CCD photoelectric noise and the background light noise in practical applications. Hence, some effective signal processing methods must be applied to improve the measurement accuracy. In this paper a novel effective method for removing the noises in the non-diffracting beam triangulation measurement system is proposed. In the method the grey system theory is used to process and reconstruct the measurement signal. Through implementing the grey dynamic filtering based on the dynamic GM(1,1), the noises can be effectively removed from the primary measurement data and the measurement accuracy of the system can be improved as a result.
Measuring attention using flash-lag effect.

PubMed

Shioiri, Satoshi; Yamamoto, Ken; Oshida, Hiroki; Matsubara, Kazuya; Yaguchi, Hirohisa

2010-08-13

We investigated the effect of attention on the flash-lag effect (FLE) in order to determine whether the FLE can be used to estimate the effect of visual attention. The FLE is the effect that a flash aligned with a moving object is perceived to lag the moving object, and several studies have shown that attention reduces its magnitude. We measured the FLE as a function of the number or speed of moving objects. The results showed that the effect of cueing, which we attributed the effect of attention, on the FLE increased monotonically with the number or the speed of the objects. This suggests that the amount of attention can be estimated by measuring the FLE, assuming that more amount of attention is required for a larger number or faster speed of objects to attend. On the basis of this presumption, we attempted to measure the spatial spread of visual attention by FLE measurements. The estimated spatial spreads were similar to those estimated by other experimental methods.
Comparative Effects of Antihistamines on Aircrew Mission Effectiveness under Sustained Operations

DTIC Science & Technology

1992-06-01

measures consist mainly of process measures. Process measures are measures of activities used to accomplish the mission and produce the final results...They include task completion times and response variability, and information processing rates as they relate to unique task assignment. Performance...contains process measures that assess the Individual contributions of hardware/software and human components to overall system performance. Measures
Perceived Effectiveness among College Students of Selected Statistical Measures in Motivating Exercise Behavior

ERIC Educational Resources Information Center

Merrill, Ray M.; Chatterley, Amanda; Shields, Eric C.

2005-01-01

This study explored the effectiveness of selected statistical measures at motivating or maintaining regular exercise among college students. The study also considered whether ease in understanding these statistical measures was associated with perceived effectiveness at motivating or maintaining regular exercise. Analyses were based on a…
Violation of the Sphericity Assumption and Its Effect on Type-I Error Rates in Repeated Measures ANOVA and Multi-Level Linear Models (MLM).

PubMed

Haverkamp, Nicolas; Beauducel, André

2017-01-01

We investigated the effects of violations of the sphericity assumption on Type I error rates for different methodical approaches of repeated measures analysis using a simulation approach. In contrast to previous simulation studies on this topic, up to nine measurement occasions were considered. Effects of the level of inter-correlations between measurement occasions on Type I error rates were considered for the first time. Two populations with non-violation of the sphericity assumption, one with uncorrelated measurement occasions and one with moderately correlated measurement occasions, were generated. One population with violation of the sphericity assumption combines uncorrelated with highly correlated measurement occasions. A second population with violation of the sphericity assumption combines moderately correlated and highly correlated measurement occasions. From these four populations without any between-group effect or within-subject effect 5,000 random samples were drawn. Finally, the mean Type I error rates for Multilevel linear models (MLM) with an unstructured covariance matrix (MLM-UN), MLM with compound-symmetry (MLM-CS) and for repeated measures analysis of variance (rANOVA) models (without correction, with Greenhouse-Geisser-correction, and Huynh-Feldt-correction) were computed. To examine the effect of both the sample size and the number of measurement occasions, sample sizes of n = 20, 40, 60, 80, and 100 were considered as well as measurement occasions of m = 3, 6, and 9. With respect to rANOVA, the results plead for a use of rANOVA with Huynh-Feldt-correction, especially when the sphericity assumption is violated, the sample size is rather small and the number of measurement occasions is large. For MLM-UN, the results illustrate a massive progressive bias for small sample sizes ( n = 20) and m = 6 or more measurement occasions. This effect could not be found in previous simulation studies with a smaller number of measurement occasions. The proportionality of bias and number of measurement occasions should be considered when MLM-UN is used. The good news is that this proportionality can be compensated by means of large sample sizes. Accordingly, MLM-UN can be recommended even for small sample sizes for about three measurement occasions and for large sample sizes for about nine measurement occasions.
The Combined Effects of Measurement Error and Omitting Confounders in the Single-Mediator Model

PubMed Central

Fritz, Matthew S.; Kenny, David A.; MacKinnon, David P.

2016-01-01

Mediation analysis requires a number of strong assumptions be met in order to make valid causal inferences. Failing to account for violations of these assumptions, such as not modeling measurement error or omitting a common cause of the effects in the model, can bias the parameter estimates of the mediated effect. When the independent variable is perfectly reliable, for example when participants are randomly assigned to levels of treatment, measurement error in the mediator tends to underestimate the mediated effect, while the omission of a confounding variable of the mediator to outcome relation tends to overestimate the mediated effect. Violations of these two assumptions often co-occur, however, in which case the mediated effect could be overestimated, underestimated, or even, in very rare circumstances, unbiased. In order to explore the combined effect of measurement error and omitted confounders in the same model, the impact of each violation on the single-mediator model is first examined individually. Then the combined effect of having measurement error and omitted confounders in the same model is discussed. Throughout, an empirical example is provided to illustrate the effect of violating these assumptions on the mediated effect. PMID:27739903
Entropic uncertainty from effective anticommutators

NASA Astrophysics Data System (ADS)

Kaniewski, Jedrzej; Tomamichel, Marco; Wehner, Stephanie

2014-07-01

We investigate entropic uncertainty relations for two or more binary measurements, for example, spin-1/2 or polarization measurements. We argue that the effective anticommutators of these measurements, i.e., the anticommutators evaluated on the state prior to measuring, are an expedient measure of measurement incompatibility. Based on the knowledge of pairwise effective anticommutators we derive a class of entropic uncertainty relations in terms of conditional Rényi entropies. Our uncertainty relations are formulated in terms of effective measures of incompatibility, which can be certified in a device-independent fashion. Consequently, we discuss potential applications of our findings to device-independent quantum cryptography. Moreover, to investigate the tightness of our analysis we consider the simplest (and very well studied) scenario of two measurements on a qubit. We find that our results outperform the celebrated bound due to Maassen and Uffink [Phys. Rev. Lett. 60, 1103 (1988), 10.1103/PhysRevLett.60.1103] and provide an analytical expression for the minimum uncertainty which also outperforms some recent bounds based on majorization.

Some effects of finite spatial resolution on skin friction measurements in turbulent boundary layers

NASA Technical Reports Server (NTRS)

Westphal, Russell V.

1988-01-01

The effects of finite spatial resolution often cause serious errors in measurements in turbulent boundary layers, with particularly large effects for measurements of fluctuating skin friction and velocities within the sublayer. However, classical analyses of finite spatial resolution effects have generally not accounted for the substantial inhomogeneity and anisotropy of near-wall turbulence. The present study has made use of results from recent computational simulations of wall-bounded turbulent flows to examine spatial resolution effects for measurements made at a wall using both single-sensor probes and those employing two sensing volumes in a V shape. Results are presented to show the effects of finite spatial resolution on a variety of quantitites deduced from the skin friction field.
An Effect Size Measure for Raju's Differential Functioning for Items and Tests

ERIC Educational Resources Information Center

Wright, Keith D.; Oshima, T. C.

2015-01-01

This study established an effect size measure for differential functioning for items and tests' noncompensatory differential item functioning (NCDIF). The Mantel-Haenszel parameter served as the benchmark for developing NCDIF's effect size measure for reporting moderate and large differential item functioning in test items. The effect size of…
Operational and environmental performance in China's thermal power industry: Taking an effectiveness measure as complement to an efficiency measure.

PubMed

Wang, Ke; Zhang, Jieming; Wei, Yi-Ming

2017-05-01

The trend toward a more fiercely competitive and strictly environmentally regulated electricity market in several countries, including China has led to efforts by both industry and government to develop advanced performance evaluation models that adapt to new evaluation requirements. Traditional operational and environmental efficiency measures do not fully consider the influence of market competition and environmental regulations and, thus, are not sufficient for the thermal power industry to evaluate its operational performance with respect to specific marketing goals (operational effectiveness) and its environmental performance with respect to specific emissions reduction targets (environmental effectiveness). As a complement to an operational efficiency measure, an operational effectiveness measure not only reflects the capacity of an electricity production system to increase its electricity generation through the improvement of operational efficiency, but it also reflects the system's capability to adjust its electricity generation activities to match electricity demand. In addition, as a complement to an environmental efficiency measure, an environmental effectiveness measure not only reflects the capacity of an electricity production system to decrease its pollutant emissions through the improvement of environmental efficiency, but it also reflects the system's capability to adjust its emissions abatement activities to fulfill environmental regulations. Furthermore, an environmental effectiveness measure helps the government regulator to verify the rationality of its emissions reduction targets assigned to the thermal power industry. Several newly developed effectiveness measurements based on data envelopment analysis (DEA) were utilized in this study to evaluate the operational and environmental performance of the thermal power industry in China during 2006-2013. Both efficiency and effectiveness were evaluated from the three perspectives of operational, environmental, and joint adjustments to each electricity production system. The operational and environmental performance changes over time were also captured through an effectiveness measure based on the global Malmquist productivity index. Our empirical results indicated that the performance of China's thermal power industry experienced significant progress during the study period and that policies regarding the development and regulation of the thermal power industry yielded the expected effects. However, the emissions reduction targets assigned to China's thermal power industry are loose and conservative. Copyright © 2017 Elsevier Ltd. All rights reserved.
Comparing Direct versus Indirect Measures of the Pedagogical Effectiveness of Team Testing

ERIC Educational Resources Information Center

Bacon, Donald R.

2011-01-01

Direct measures (tests) of the pedagogical effectiveness of team testing and indirect measures (student surveys) of pedagogical effectiveness of team testing were collected in several sections of an undergraduate marketing course with varying levels of the use of team testing. The results indicate that although students perceived team testing to…
Testing a model of componential processing of multi-symbol numbers-evidence from measurement units.

PubMed

Huber, Stefan; Bahnmueller, Julia; Klein, Elise; Moeller, Korbinian

2015-10-01

Research on numerical cognition has addressed the processing of nonsymbolic quantities and symbolic digits extensively. However, magnitude processing of measurement units is still a neglected topic in numerical cognition research. Hence, we investigated the processing of measurement units to evaluate whether typical effects of multi-digit number processing such as the compatibility effect, the string length congruity effect, and the distance effect are also present for measurement units. In three experiments, participants had to single out the larger one of two physical quantities (e.g., lengths). In Experiment 1, the compatibility of number and measurement unit (compatible: 3 mm_6 cm with 3 < 6 and mm < cm; incompatible: 3 cm_6 mm with 3 < 6 but cm > mm) as well as string length congruity (congruent: 1 m_2 km with m < km and 2 < 3 characters; incongruent: 2 mm_1 m with mm < m, but 3 > 2 characters) were manipulated. We observed reliable compatibility effects with prolonged reaction times (RT) for incompatible trials. Moreover, a string length congruity effect was present in RT with longer RT for incongruent trials. Experiments 2 and 3 served as control experiments showing that compatibility effects persist when controlling for holistic distance and that a distance effect for measurement units exists. Our findings indicate that numbers and measurement units are processed in a componential manner and thus highlight that processing characteristics of multi-digit numbers generalize to measurement units. Thereby, our data lend further support to the recently proposed generalized model of componential multi-symbol number processing.
Working with Error and Uncertainty to Increase Measurement Validity

ERIC Educational Resources Information Center

Amrein-Beardsley, Audrey; Barnett, Joshua H.

2012-01-01

Over the previous two decades, the era of accountability has amplified efforts to measure educational effectiveness more than Edward Thorndike, the father of educational measurement, likely would have imagined. Expressly, the measurement structure for evaluating educational effectiveness continues to rely increasingly on one sole…
On the Possibility to Combine the Order Effect with Sequential Reproducibility for Quantum Measurements

NASA Astrophysics Data System (ADS)

Basieva, Irina; Khrennikov, Andrei

2015-10-01

In this paper we study the problem of a possibility to use quantum observables to describe a possible combination of the order effect with sequential reproducibility for quantum measurements. By the order effect we mean a dependence of probability distributions (of measurement results) on the order of measurements. We consider two types of the sequential reproducibility: adjacent reproducibility (A-A) (the standard perfect repeatability) and separated reproducibility(A-B-A). The first one is reproducibility with probability 1 of a result of measurement of some observable A measured twice, one A measurement after the other. The second one, A-B-A, is reproducibility with probability 1 of a result of A measurement when another quantum observable B is measured between two A's. Heuristically, it is clear that the second type of reproducibility is complementary to the order effect. We show that, surprisingly, this may not be the case. The order effect can coexist with a separated reproducibility as well as adjacent reproducibility for both observables A and B. However, the additional constraint in the form of separated reproducibility of the B-A-B type makes this coexistence impossible. The problem under consideration was motivated by attempts to apply the quantum formalism outside of physics, especially, in cognitive psychology and psychophysics. However, it is also important for foundations of quantum physics as a part of the problem about the structure of sequential quantum measurements.
Effective Measures of Continuing Education

DTIC Science & Technology

2013-03-01

with increased participation in charitable or public service activities. The percentage of people who donate their time to organizations and the... Effective Measures of Continuing Education by Colonel Morris A. Turner United States Army United...STRATEGY RESEARCH PROJECT .33 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Effective Measures of Continuing Education 5a. CONTRACT
Antiepileptic Drug Behavioral Side Effects in Individuals with Mental Retardation and the Use of Behavioral Measurement Techniques.

ERIC Educational Resources Information Center

Kalachnik, John E.; And Others

1995-01-01

Behavioral psychology measurement methods helped assess antiepileptic drug behavioral side effects in five individuals with mental retardation who could not verbally communicate presence of side effects. When the suspected antiepileptic drug was altered, an 81% reduction of maladaptive behaviors occurred. The measurement methods enabled systematic…
MEASUREMENT OF EFFECTIVE AIR DIFFUSION COEFFICIENTS FOR TRICHLOROETHENE IN UNDISTURBED SOIL CORES. (R826162)

EPA Science Inventory

Abstract
In this study, we measure effective diffusion coefficients for trichloroethene in undisturbed soil samples taken from Picatinny Arsenal, New Jersey. The measured effective diffusion coefficients ranged from 0.0053 to 0.0609 cm²/s over a range of air...
Automated acoustic intensity measurements and the effect of gear tooth profile on noise

NASA Technical Reports Server (NTRS)

Atherton, William J.; Pintz, Adam; Lewicki, David G.

1987-01-01

Acoustic intensity measurements were made at NASA Lewis Research Center on a spur gear test apparatus. The measurements were obtained with the Robotic Acoustic Intensity Measurement System developed by Cleveland State University. This system provided dense spatial positioning, and was calibrated against a high quality acoustic intensity system. The measured gear noise compared gearsets having two different tooth profiles. The tests evaluated the sound field of the different gears for two speeds and three loads. The experimental results showed that gear tooth profile had a major effect on measured noise. Load and speed were found to have an effect on noise also.
[Effects of mere exposure on category evaluation measured by the IAT and the GNAT].

PubMed

Kawakami, Naoaki; Sato, Hirotsune; Yoshida, Fujio

2010-12-01

Based on mere exposure studies, we proposed that repeated exposure to stimuli belonging to a common category leads to a positive evaluation of that category. Furthermore, to investigate the implicit effects of mere exposure, indirect measures were used. In a series of experiments, participants were repeatedly exposed to mimetic words written in Japanese hiragana or katakana, or nothing (control). Then their evaluations of the category ("hiragana" or "katakana") were measured using indirect and direct measures. In Experiment 1 (Implicit Association Test; IAT), we adopted a traditional design using an exposure paradigm, such that the rating stimuli were identical to the exposed stimuli. Significant effects were observed for both measures. In Experiment 2 (IAT) and Experiment 3 (Go/No-go Association Task; GNAT), we used non-exposed stimuli that belonged to a common category as the rating stimuli. Significant effects were observed only for indirect measures. These results indicate that repeated exposure has unconscious positive effects on category evaluation. Theoretical and methodological implications of the findings are discussed.
A new point contact surface acoustic wave transducer for measurement of acoustoelastic effect of polymethylmethacrylate.

PubMed

Lee, Yung-Chun; Kuo, Shi Hoa

2004-01-01

A new acoustic transducer and measurement method have been developed for precise measurement of surface wave velocity. This measurement method is used to investigate the acoustoelastic effects for waves propagating on the surface of a polymethylmethacrylate (PMMA) sample. The transducer uses two miniature conical PZT elements for acoustic wave transmitter and receiver on the sample surface; hence, it can be viewed as a point-source/point-receiver transducer. Acoustic waves are excited and detected with the PZT elements, and the wave velocity can be accurately determined with a cross-correlation waveform comparison method. The transducer and its measurement method are particularly sensitive and accurate in determining small changes in wave velocity; therefore, they are applied to the measurement of acoustoelastic effects in PMMA materials. Both the surface skimming longitudinal wave and Rayleigh surface wave can be simultaneously excited and measured. With a uniaxial-loaded PMMA sample, both acoustoelastic effects for surface skimming longitudinal wave and Rayleigh waves of PMMA are measured. The acoustoelastic coefficients for both types of surface wave motions are simultaneously determined. The transducer and its measurement method provide a practical way for measuring surface stresses nondestructively.
R2 effect-size measures for mediation analysis

PubMed Central

Fairchild, Amanda J.; MacKinnon, David P.; Taborga, Marcia P.; Taylor, Aaron B.

2010-01-01

R2 effect-size measures are presented to assess variance accounted for in mediation models. The measures offer a means to evaluate both component paths and the overall mediated effect in mediation models. Statistical simulation results indicate acceptable bias across varying parameter and sample-size combinations. The measures are applied to a real-world example using data from a team-based health promotion program to improve the nutrition and exercise habits of firefighters. SAS and SPSS computer code are also provided for researchers to compute the measures in their own data. PMID:19363189
R2 effect-size measures for mediation analysis.

PubMed

Fairchild, Amanda J; Mackinnon, David P; Taborga, Marcia P; Taylor, Aaron B

2009-05-01

R(2) effect-size measures are presented to assess variance accounted for in mediation models. The measures offer a means to evaluate both component paths and the overall mediated effect in mediation models. Statistical simulation results indicate acceptable bias across varying parameter and sample-size combinations. The measures are applied to a real-world example using data from a team-based health promotion program to improve the nutrition and exercise habits of firefighters. SAS and SPSS computer code are also provided for researchers to compute the measures in their own data.
Acute Respiratory Distress Syndrome Measurement Error. Potential Effect on Clinical Study Results

PubMed Central

Cooke, Colin R.; Iwashyna, Theodore J.; Hofer, Timothy P.

2016-01-01

Rationale: Identifying patients with acute respiratory distress syndrome (ARDS) is a recognized challenge. Experts often have only moderate agreement when applying the clinical definition of ARDS to patients. However, no study has fully examined the implications of low reliability measurement of ARDS on clinical studies. Objectives: To investigate how the degree of variability in ARDS measurement commonly reported in clinical studies affects study power, the accuracy of treatment effect estimates, and the measured strength of risk factor associations. Methods: We examined the effect of ARDS measurement error in randomized clinical trials (RCTs) of ARDS-specific treatments and cohort studies using simulations. We varied the reliability of ARDS diagnosis, quantified as the interobserver reliability (κ-statistic) between two reviewers. In RCT simulations, patients identified as having ARDS were enrolled, and when measurement error was present, patients without ARDS could be enrolled. In cohort studies, risk factors as potential predictors were analyzed using reviewer-identified ARDS as the outcome variable. Measurements and Main Results: Lower reliability measurement of ARDS during patient enrollment in RCTs seriously degraded study power. Holding effect size constant, the sample size necessary to attain adequate statistical power increased by more than 50% as reliability declined, although the result was sensitive to ARDS prevalence. In a 1,400-patient clinical trial, the sample size necessary to maintain similar statistical power increased to over 1,900 when reliability declined from perfect to substantial (κ = 0.72). Lower reliability measurement diminished the apparent effectiveness of an ARDS-specific treatment from a 15.2% (95% confidence interval, 9.4–20.9%) absolute risk reduction in mortality to 10.9% (95% confidence interval, 4.7–16.2%) when reliability declined to moderate (κ = 0.51). In cohort studies, the effect on risk factor associations was similar. Conclusions: ARDS measurement error can seriously degrade statistical power and effect size estimates of clinical studies. The reliability of ARDS measurement warrants careful attention in future ARDS clinical studies. PMID:27159648
Validation Engine for Observational Protocols. Measures of Effective Teaching (MET) Project

ERIC Educational Resources Information Center

Bill & Melinda Gates Foundation, 2010

2010-01-01

In the fall of 2009, the Bill and Melinda Gates Foundation launched the two-year Measures of Effective Teaching (MET) project to rigorously develop and test multiple measures of teacher effectiveness. As part of the project, partners from more than a dozen reputable academic, non-profit and for-profit organizations collected and analyzed data from…
Center effect on ankle-brachial index measurement when using the reference method (Doppler and manometer): results from a large cohort study.

PubMed

Vierron, Emilie; Halimi, Jean-Michel; Tichet, Jean; Balkau, Beverley; Cogneau, Joel; Giraudeau, Bruno

2009-07-01

The ankle-brachial index (ABI) is a simple and noninvasive tool used to detect peripheral arterial disease (PAD). We aimed to assess, in a French multicenter cohort, the center effect associated with arterial pressure (AP) and ABI measurements using the reference method and using a semiautomatic device. This study included baseline and 9-year follow-up data from 3,664 volunteers of 10 health examination centers of the DESIR (Data from an Epidemiological Study on the Insulin Resistance) syndrome French cohort. Ankle and brachial AP were measured at inclusion by the reference method (a mercury sphygmomanometer coupled with a Doppler probe for ankle measurements) and at 9 years by a semiautomatic device (Omron HEM-705CP). The center effect was assessed by the intraclass correlation coefficient (ICC), ratio of the between-center variance to the total variance of the measurement. At inclusion, the sample mean age was 47.5 (s.d. 9.9) years; 49.3% were men. Although ICCs were smaller than 0.05 for brachial AP measurements, they were close to 0.18 and 0.20 for ankle systolic AP (SAP) and ABI measurements, respectively, when the reference method was used. No center effect for measures other than ankle SAP was detected. With the semiautomatic device method, all ICCs, including those for ankle SAP and ABI measurements, were between 0.005 and 0.04. We found an important center effect on ABI measured with a sphygmomanometer and a Doppler probe but not a semiautomatic device. A center effect should be taken into account when planning any multicenter study on ABI measurement.
Addressing Educational Reform: Exploring PE Metrics as a System to Measure Student Achievement in Physical Education

ERIC Educational Resources Information Center

Hushman, Glenn; Hushman, Carolyn; Carbonneau, Kira

2015-01-01

The current educational reform movement in the United States is focused on measuring the effectiveness of teachers. One component of teacher effectiveness is student achievement. The effectiveness of using PE Metrics as a measure of student achievement in a physical activity setting with a low socioeconomic, culturally diverse population was…
Peculiar velocity measurement in a clumpy universe

NASA Astrophysics Data System (ADS)

Habibi, Farhang; Baghram, Shant; Tavasoli, Saeed

Aims: In this work, we address the issue of peculiar velocity measurement in a perturbed Friedmann universe using the deviations from measured luminosity distances of standard candles from background FRW universe. We want to show and quantify the statement that in intermediate redshifts (0.5 < z < 2), deviations from the background FRW model are not uniquely governed by peculiar velocities. Luminosity distances are modified by gravitational lensing. We also want to indicate the importance of relativistic calculations for peculiar velocity measurement at all redshifts. Methods: For this task, we discuss the relativistic correction on luminosity distance and redshift measurement and show the contribution of each of the corrections as lensing term, peculiar velocity of the source and Sachs-Wolfe effect. Then, we use the SNe Ia sample of Union 2, to investigate the relativistic effects, we consider. Results: We show that, using the conventional peculiar velocity method, that ignores the lensing effect, will result in an overestimate of the measured peculiar velocities at intermediate redshifts. Here, we quantify this effect. We show that at low redshifts the lensing effect is negligible compare to the effect of peculiar velocity. From the observational point of view, we show that the uncertainties on luminosity of the present SNe Ia data prevent us from precise measuring the peculiar velocities even at low redshifts (z < 0.2).

Effects of borehole design on complex electrical resistivity measurements: laboratory validation and numerical experiments

NASA Astrophysics Data System (ADS)

Treichel, A.; Huisman, J. A.; Zhao, Y.; Zimmermann, E.; Esser, O.; Kemna, A.; Vereecken, H.

2012-12-01

Geophysical measurements within a borehole are typically affected by the presence of the borehole. The focus of the current study is to quantify the effect of borehole design on broadband electrical impedance tomography (EIT) measurements within boreholes. Previous studies have shown that effects on the real part of the electrical resistivity are largest for boreholes with large diameters and for materials with a large formation factor. However, these studies have not considered the effect of the well casing and the filter gravel on the measurement of the real part of the electrical resistivity. In addition, the effect of borehole design on the imaginary part of the electrical resistivity has not been investigated yet. Therefore, the aim of this study is to investigate the effect of borehole design on the complex electrical resistivity using laboratory measurements and numerical simulations. In order to do so, we developed a high resolution two dimensional axisymmetric finite element model (FE) that enables us to simulate the effects of several key borehole design parameters (e.g. borehole diameter, thickness of PVC well casing) on the measurement process. For the material surrounding the borehole, realistic values for complex resistivity were obtained from a database of laboratory measurements of complex resistivity from the test site Krauthausen (Germany). The slotted PVC well casing is represented by an effective resistivity calculated from the water-filled slot volume and the PVC volume. Measurements with and without PVC well casing were made with a four-electrode EIT logging tool in a water-filled rain barrel. The initial comparison for the case that the logging tool was inserted in the PVC well casing showed a considerable mismatch between measured and modeled values. It was required to consider a complete electrode model instead of point electrodes to remove this mismatch. This validated model was used to investigate in detail how complex resistivity measurements with different electrode configurations are affected by borehole design. Finally, the plausibility of our results was verified by comparing the simulation results with borehole EIT measurements made at the test site Krauthausen.
Attention to Novelty, Fear-Anxiety, and Age: Their Effects on Conduct Problems

ERIC Educational Resources Information Center

Eaves, Ronald C.; Darch, Craig; Williams, Thomas O., Jr.

2004-01-01

The authors investigated the effects of attention to novelty, fear-anxiety, and age on 3 measures of conduct problems. They found several main and interaction effects. The results indicated the presence of the hypothesized 3-way interaction for 2 dependent measures (i.e., conduct problem, socialized aggression); the 3rd dependent measure (i.e.,…
Remote Vibration Measurements at a Sud Aviation Alouette III Helicopter with a CW CO2-Laser System

DTIC Science & Technology

1993-09-28

mrad and a continuous output of 0.4 Watt. The purpose of our measurements was to measure the vibration spectra of a helicopter from the Dutch Air Force...detection 13 3.2.1 Non-linear effects in vibrometry 15 4 THE VIBRATION SOURCES OF A HELICOPTER 24 5 MEASUREMENTS 29 5.1 Measuring Method 29 5.2 Scenario...vibration in Hz. 3.2.1 Non-linear effects in vibrometry A brief explanation of the non-linear effects is given below. A FM receiver has a built-in limiter
Relationship of Echocardiographic Z Scores Adjusted for Body Surface Area to Age, Sex, Race, and Ethnicity: The Pediatric Heart Network Normal Echocardiogram Database.

PubMed

Lopez, Leo; Colan, Steven; Stylianou, Mario; Granger, Suzanne; Trachtenberg, Felicia; Frommelt, Peter; Pearson, Gail; Camarda, Joseph; Cnota, James; Cohen, Meryl; Dragulescu, Andreea; Frommelt, Michele; Garuba, Olukayode; Johnson, Tiffanie; Lai, Wyman; Mahgerefteh, Joseph; Pignatelli, Ricardo; Prakash, Ashwin; Sachdeva, Ritu; Soriano, Brian; Soslow, Jonathan; Spurney, Christopher; Srivastava, Shubhika; Taylor, Carolyn; Thankavel, Poonam; van der Velde, Mary; Minich, LuAnn

2017-11-01

Published nomograms of pediatric echocardiographic measurements are limited by insufficient sample size to assess the effects of age, sex, race, and ethnicity. Variable methodologies have resulted in a wide range of Z scores for a single measurement. This multicenter study sought to determine Z scores for common measurements adjusted for body surface area (BSA) and stratified by age, sex, race, and ethnicity. Data collected from healthy nonobese children ≤18 years of age at 19 centers with a normal echocardiogram included age, sex, race, ethnicity, height, weight, echocardiographic images, and measurements performed at the Core Laboratory. Z score models involved indexed parameters (X/BSA α ) that were normally distributed without residual dependence on BSA. The models were tested for the effects of age, sex, race, and ethnicity. Raw measurements from models with and without these effects were compared, and <5% difference was considered clinically insignificant because interobserver variability for echocardiographic measurements are reported as ≥5% difference. Of the 3566 subjects, 90% had measurable images. Appropriate BSA transformations (BSA α ) were selected for each measurement. Multivariable regression revealed statistically significant effects by age, sex, race, and ethnicity for all outcomes, but all effects were clinically insignificant based on comparisons of models with and without the effects, resulting in Z scores independent of age, sex, race, and ethnicity for each measurement. Echocardiographic Z scores based on BSA were derived from a large, diverse, and healthy North American population. Age, sex, race, and ethnicity have small effects on the Z scores that are statistically significant but not clinically important. © 2017 American Heart Association, Inc.
Perceived School Effectiveness: Case Study of a Liverpool College

ERIC Educational Resources Information Center

Samy, M.; Cook, K.

2009-01-01

Purpose: A quantitative effectiveness measurement based on the perceptions of the local community has been established as an effective mode of evaluating the level of satisfaction or perceived effectiveness of a school. In order to measure the level of effectiveness as perceived by their communities, educational institutions could use this…
Memory effects on adsorption tubes for mercury vapor measurement in ambient air: elucidation, quantification, and strategies for mitigation of analytical bias.

PubMed

Brown, Richard J C; Kumar, Yarshini; Brown, Andrew S; Kim, Ki-Hyun

2011-09-15

The short- and long-term memory effects associated with measurements of mercury vapor in air using gold-coated silica adsorption tubes have been described. Data are presented to quantify these effects and to determine their dependence on certain relevant measurement parameters, such as number of heating cycles used for each analysis, age of adsorption tube, mass of mercury on adsorption tube, and the length of time between analyses. The results suggest that the long-term memory effect is due to absorption of mercury within the bulk gold in the adsorption tube, which may only be fully liberated by allowing enough time for this mercury to diffuse to the gold surface. The implications of these effects for air quality networks making these measurements routinely has been discussed, and recommendations have been made to ensure any measurement bias is minimized.
Do Between-Culture Differences Really Mean that People Are Different? A Look at Some Measures of Culture Effect Size.

ERIC Educational Resources Information Center

Matsumoto, David; Grissom, Robert J.; Dinnel, Dale L.

2001-01-01

Recommends four measures of cultural effect size appropriate for cross-cultural research (standardized difference between two sample means, probabilistic superiority effect size measure, Cohen's U1, and point biserial correlation), demonstrating their efficacy on two data sets from previously published studies and arguing for their use in future…
7 CFR 1484.72 - How is program effectiveness measured?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false How is program effectiveness measured? 1484.72... effectiveness measured? (a) The Government Performance and Results Act (GPRA) of 1993 (5 U.S.C. 306; 31 U.S.C..., providing the basis for the strategic plan. The evaluation results guide the development and scope of a...
Evaluation of effectiveness of combined sewer overflow control measures by operational data.

PubMed

Schroeder, K; Riechel, M; Matzinger, A; Rouault, P; Sonnenberg, H; Pawlowsky-Reusing, E; Gnirss, R

2011-01-01

The effect of combined sewer overflow (CSO) control measures should be validated during operation based on monitoring of CSO activity and subsequent comparison with (legal) requirements. However, most CSO monitoring programs have been started only recently and therefore no long-term data is available for reliable efficiency control. A method is proposed that focuses on rainfall data for evaluating the effectiveness of CSO control measures. It is applicable if a sufficient time-series of rainfall data and a limited set of data on CSO discharges are available. The method is demonstrated for four catchments of the Berlin combined sewer system. The analysis of the 2000-2007 data shows the effect of CSO control measures, such as activation of in-pipe storage capacities within the Berlin system. The catchment, where measures are fully implemented shows less than 40% of the CSO activity of those catchments, where measures have not yet or not yet completely been realised.
Measurements of the light-absorbing material inside cloud droplets and its effect on cloud albedo

NASA Technical Reports Server (NTRS)

Twohy, C. H.; Clarke, A. D.; Warren, Stephen G.; Radke, L. F.; Charleson, R. J.

1990-01-01

Most of the measurements of light-absorbing aerosol particles made previously have been in non-cloudy air and therefore provide no insight into aerosol effects on cloud properties. Here, researchers describe an experiment designed to measure light absorption exclusively due to substances inside cloud droplets, compare the results to related light absorption measurements, and evaluate possible effects on the albedo of clouds. The results of this study validate those of Twomey and Cocks and show that the measured levels of light-absorbing material are negligible for the radiative properties of realistic clouds. For the measured clouds, which appear to have been moderately polluted, the amount of elemental carbon (EC) present was insufficient to affect albedo. Much higher contaminant levels or much larger droplets than those measured would be necessary to significantly alter the radiative properties. The effect of the concentrations of EC actually measured on the albedo of snow, however, would be much more pronounced since, in contrast to clouds, snowpacks are usually optically semi-infinite and have large particle sizes.
Insuring against earthquakes: simulating the cost-effectiveness of disaster preparedness.

PubMed

de Hoop, Thomas; Ruben, Ruerd

2010-04-01

Ex-ante measures to improve risk preparedness for natural disasters are generally considered to be more effective than ex-post measures. Nevertheless, most resources are allocated after an event in geographical areas that are vulnerable to natural disasters. This paper analyses the cost-effectiveness of ex-ante adaptation measures in the wake of earthquakes and provides an assessment of the future role of private and public agencies in disaster risk management. The study uses a simulation model approach to evaluate consumption losses after earthquakes under different scenarios of intervention. Particular attention is given to the role of activity diversification measures in enhancing disaster preparedness and the contributions of (targeted) microcredit and education programmes for reconstruction following a disaster. Whereas the former measures are far more cost-effective, missing markets and perverse incentives tend to make ex-post measures a preferred option, thus occasioning underinvestment in ex-ante adaptation initiatives.
How the measurement of memory processes can affect memory performance: the case of remember/know judgments.

PubMed

Naveh-Benjamin, Moshe; Kilb, Angela

2012-01-01

Relatively little attention has been paid thus far in memory research to the effects of measurement instruments intended to assess memory processes on the constructs being measured. The current article investigates the influence of employing the popular remember/know (R/K) measurement procedure on memory performance itself. This measurement procedure was extensively used in the past to assess the respective contributions of 2 processes to memory judgments, one based on familiarity and the other on recollection. Two experiments using unrelated word pairs showed that the use of an R/K procedure can alter memory performance. Specifically, the R/K procedure improved associative memory among older but not younger adults compared to conditions in which participants were not asked to provide R/K judgments. Such an effect was not observed in item memory performance. Potential mechanisms mediating these differential memory measurement effects are outlined, and the measurement effects' implications for memory and cognitive research are discussed.
Developing Effective Performance Measures

DTIC Science & Technology

2014-10-14

University When Performance Measurement Goes Bad Laziness Vanity Narcissism Too Many Pettiness Inanity 52 Developing Effective...Kasunic, October 14, 2014 © 2014 Carnegie Mellon University Narcissism Measuring performance from the organization’s point of view, rather than from
Global statistics of liquid water content and effective number concentration of water clouds over ocean derived from combined CALIPSO and MODIS measurements

NASA Astrophysics Data System (ADS)

Hu, Y.; Vaughan, M.; McClain, C.; Behrenfeld, M.; Maring, H.; Anderson, D.; Sun-Mack, S.; Flittner, D.; Huang, J.; Wielicki, B.; Minnis, P.; Weimer, C.; Trepte, C.; Kuehn, R.

2007-06-01

This study presents an empirical relation that links the volume extinction coefficients of water clouds, the layer integrated depolarization ratios measured by lidar, and the effective radii of water clouds derived from collocated passive sensor observations. Based on Monte Carlo simulations of CALIPSO lidar observations, this method combines the cloud effective radius reported by MODIS with the lidar depolarization ratios measured by CALIPSO to estimate both the liquid water content and the effective number concentration of water clouds. The method is applied to collocated CALIPSO and MODIS measurements obtained during July and October of 2006, and January 2007. Global statistics of the cloud liquid water content and effective number concentration are presented.
Effects of trunk stability on isometric knee extension muscle strength measurement while sitting.

PubMed

Hirano, Masahiro; Gomi, Masahiro; Katoh, Munenori

2016-09-01

[Purpose] This study aimed to investigate the effect of trunk stability on isometric knee extension muscle strength measurement while sitting by performing simultaneous measurements with a handheld dynamometer (HHD) and an isokinetic dynamometer (IKD) in the same seated condition. [Subjects and Methods] The subjects were 30 healthy volunteers. Isometric knee extension muscle strength was simultaneously measured with a HHD and an IKD by using an IKD-specific chair. The measurement was performed twice. Measurement instrument variables and the number of measurements were examined by using the analysis of variance and correlation tests. [Results] The measurement instrument variables and the number of measurements were not significantly different. The correlation coefficients between the HHD and IKD measurements were ≥0.96. [Conclusion] Isometric knee extension muscle strength measurement using the HHD in the sitting position resulted in a lower value than that using the IKD, presumably because of the effect of trunk stability on the measurement. In the same seated posture with trunk stability, no significant difference in measurement values was observed between the HHD and IKD. The present findings suggest that trunk stability while seated during isometric knee extension muscle strength measurement influenced the HHD measurement.
Methods and results of boundary layer measurements on a glider

NASA Technical Reports Server (NTRS)

Nes, W. V.

1978-01-01

Boundary layer measurements were carried out on a glider under natural conditions. Two effects are investigated: the effect of inconstancy of the development of static pressure within the boundary layer and the effect of the negative pressure difference in a sublaminar boundary layer. The results obtained by means of an ion probe in parallel connection confirm those results obtained by means of a pressure probe. Additional effects which have occurred during these measurements are briefly dealt with.
Adiponectin, Leptin and Objectively Measured Physical Activity in Adults: A Narrative Review

PubMed Central

Nurnazahiah, Ali; Lua, Pei Lin; Shahril, Mohd Razif

2016-01-01

The objective of this study was to compile and analyse existing scientific evidences reporting the effects of objectively measured physical activity on the levels of adiponectin and leptin. Articles related to the effects of objectively measured physical activity on the levels of adiponectin and leptin were searched from the Medline and PubMed databases. The search was limited to ‘objectively measured’ physical activity, and studies that did not objectively measure the physical activity were excluded. Only English articles were included in the search and review. A total of 18 articles encompassing 2,026 respondents met the inclusion criteria. The eligible articles included all forms of evidence (e.g., cross-sectional and intervention). Seventeen and 11 studies showed the effects of objectively measured physical activity on adiponectin and leptin, respectively. Five and four cross-sectional studies showed the effects of objectively measured physical activity on adiponectin and leptin, respectively. Two out of five studies showed a weak to moderate positive association between adiponectin and objectively measured physical activity, while three out of four studies showed a weak to moderate inverse association between leptin and objectively measured physical activity. For intervention studies, six out of 12 studies involving adiponectin and five out of seven studies involving leptin showed a significant effect between the proteins and objectively measured physical activity. However, a definitive conclusion could not be drawn due to several methodological flaws in the existing articles and the acute lack of additional research in this area. In conclusion, the existing evidences are encouraging but yet not compelling. Hence, further well-designed large trials are needed before the effectiveness of objectively measured physical activity in elevating adiponectin levels and in decreasing leptin levels could be strongly confirmed. PMID:28090175
Spectral BRDF-based determination of proper measurement geometries to characterize color shift of special effect coatings.

PubMed

Ferrero, Alejandro; Rabal, Ana; Campos, Joaquín; Martínez-Verdú, Francisco; Chorro, Elísabet; Perales, Esther; Pons, Alicia; Hernanz, María Luisa

2013-02-01

A reduced set of measurement geometries allows the spectral reflectance of special effect coatings to be predicted for any other geometry. A physical model based on flake-related parameters has been used to determine nonredundant measurement geometries for the complete description of the spectral bidirectional reflectance distribution function (BRDF). The analysis of experimental spectral BRDF was carried out by means of principal component analysis. From this analysis, a set of nine measurement geometries was proposed to characterize special effect coatings. It was shown that, for two different special effect coatings, these geometries provide a good prediction of their complete color shift.
Measures to Evaluate the Effects of DBS on Speech Production

PubMed Central

Weismer, Gary; Yunusova, Yana; Bunton, Kate

2011-01-01

The purpose of this paper is to review and evaluate measures of speech production that could be used to document effects of Deep Brain Stimulation (DBS) on speech performance, especially in persons with Parkinson disease (PD). A small set of evaluative criteria for these measures is presented first, followed by consideration of several speech physiology and speech acoustic measures that have been studied frequently and reported on in the literature on normal speech production, and speech production affected by neuromotor disorders (dysarthria). Each measure is reviewed and evaluated against the evaluative criteria. Embedded within this review and evaluation is a presentation of new data relating speech motions to speech intelligibility measures in speakers with PD, amyotrophic lateral sclerosis (ALS), and control speakers (CS). These data are used to support the conclusion that at the present time the slope of second formant transitions (F2 slope), an acoustic measure, is well suited to make inferences to speech motion and to predict speech intelligibility. The use of other measures should not be ruled out, however, and we encourage further development of evaluative criteria for speech measures designed to probe the effects of DBS or any treatment with potential effects on speech production and communication skills. PMID:24932066
Measuring Learning Gains in Chemical Education: A Comparison of Two Methods

ERIC Educational Resources Information Center

Pentecost, Thomas C.; Barbera, Jack

2013-01-01

Evaluating the effect of a pedagogical innovation is often done by looking for a significant difference in a content measure using a pre-post design. While this approach provides valuable information regarding the presence or absence of an effect, it is limited in providing details about the nature of the effect. A measure of the magnitude of the…

More than a score: a qualitative study of ancillary benefits of performance measurement.

PubMed

Powell, Adam A; White, Katie M; Partin, Melissa R; Halek, Krysten; Hysong, Sylvia J; Zarling, Edwin; Kirsh, Susan R; Bloomfield, Hanna E

2014-08-01

Prior research has examined clinical effects of performance measurement systems. To the extent that non-clinical effects have been researched, the focus has been on negative unintended consequences. Yet, these same systems may also have ancillary benefits for patients and providers--that is, benefits that extend beyond improvements on clinical measures. The purpose of this study is to identify and describe potential ancillary benefits of performance measures as perceived by primary care staff and facility leaders in a large US healthcare system. In-person individual semistructured interviews were conducted with 59 primary care staff and facility leaders at four Veterans Health Administration facilities. Transcribed interviews were coded and organised into thematic categories. Interviewed staff observed that local performance measurement implementation practices can result in increased patient knowledge and motivation. These effects on patients can lead to improved performance scores and additional ancillary benefits. Performance measurement implementation can also directly result in ancillary benefits for the patients and providers. Patients may experience greater satisfaction with care and psychosocial benefits associated with increased provider-patient communication. Ancillary benefits of performance measurement for providers include increased pride in individual or organisational performance and greater confidence that one's practice is grounded in evidence-based medicine. A comprehensive understanding of the effects of performance measurement systems needs to incorporate ancillary benefits as well as effects on clinical performance scores and negative unintended consequences. Although clinical performance has been the focus of most evaluations of performance measurement to date, both patient care and provider satisfaction may improve more rapidly if all three categories of effects are considered when designing and evaluating performance measurement systems. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Comparing Hall Effect and Field Effect Measurements on the Same Single Nanowire.

PubMed

Hultin, Olof; Otnes, Gaute; Borgström, Magnus T; Björk, Mikael; Samuelson, Lars; Storm, Kristian

2016-01-13

We compare and discuss the two most commonly used electrical characterization techniques for nanowires (NWs). In a novel single-NW device, we combine Hall effect and back-gated and top-gated field effect measurements and quantify the carrier concentrations in a series of sulfur-doped InP NWs. The carrier concentrations from Hall effect and field effect measurements are found to correlate well when using the analysis methods described in this work. This shows that NWs can be accurately characterized with available electrical methods, an important result toward better understanding of semiconductor NW doping.
Analysis and correction of ground reflection effects in measured narrowband sound spectra using cepstral techniques

NASA Technical Reports Server (NTRS)

Miles, J. H.; Stevens, G. H.; Leininger, G. G.

1975-01-01

Ground reflections generate undesirable effects on acoustic measurements such as those conducted outdoors for jet noise research, aircraft certification, and motor vehicle regulation. Cepstral techniques developed in speech processing are adapted to identify echo delay time and to correct for ground reflection effects. A sample result is presented using an actual narrowband sound pressure level spectrum. The technique can readily be adapted to existing fast Fourier transform type spectrum measurement instrumentation to provide field measurements/of echo time delays.
Melatonin Production, Sleep Patterns and Modeled Performance Effectiveness in Subjects in the High Arctic

DTIC Science & Technology

2014-05-01

measure ambient light as well as motion. Sleep data obtained from the Actigraphs was used to model the cognitive effectiveness of each subject...Furthermore, saliva was collected at regular intervals to measure melatonin and assess DLMO. Results. In general, sleep duration was found to be...Repeated measures ANOVA with ‘month’ as a between factor and ‘days’ as the repeated measure , indicates a significant main effect of ‘month’ F(1, 23) = 4.98
An exploratory study of the combined effects of orally administered methylphenidate and delta-9-tetrahydrocannabinol (THC) on cardiovascular function, subjective effects, and performance in healthy adults.

PubMed

Kollins, Scott H; Schoenfelder, Erin N; English, Joseph S; Holdaway, Alex; Van Voorhees, Elizabeth; O'Brien, Benjamin R; Dew, Rachel; Chrisman, Allan K

2015-01-01

Methylphenidate (MPH) is commonly prescribed for the treatment of Attention Deficit Hyperactivity Disorder (ADHD), and is often used illicitly by young adults. Illicit users often coadminister MPH with marijuana. Little is known about physiologic and subjective effects of these substances used in combination. In this double-blind, cross-over experiment, sixteen healthy adult subjects free from psychiatric illness (including ADHD) and reporting modest levels of marijuana use participated in 6 experimental sessions wherein all combinations of placebo or 10mg oral doses of delta-9-tetrahydocannibinol (THC); and 0mg, 10mg and 40 mg of MPH were administered. Sessions were separated by at least 48 hours. Vital signs, subjective effects, and performance measure were collected. THC and MPH showed additive effects on heart rate and rate pressure product (e.g., peak heart rate for 10mg THC+0mg, 10mg, and 40 mg MPH=89.1, 95.9, 102.0 beats/min, respectively). Main effects of THC and MPH were also observed on a range of subjective measures of drug effects, and significant THC dose × MPH dose interactions were found on measures of "Feel Drug," "Good Effects," and "Take Drug Again." THC increased commission errors on a continuous performance test (CPT) and MPH reduced reaction time variability on this measure. Effects of THC, MPH, and their combination were variable on a measure of working memory (n-back task), though in general, MPH decreased reaction times and THC mitigated these effects. These results suggest that the combination of low to moderate doses of MPH and THC produces unique effects on cardiovascular function, subjective effects and performance measures. Copyright © 2014 Elsevier Inc. All rights reserved.
An exploratory study of the combined effects of orally administered methylphenidate and delta-9-tetrahydrocannabinol (THC) on cardiovascular function, subjective effects, and performance in healthy adults

PubMed Central

Kollins, Scott H.; Schoenfelder, Erin N.; English, Joseph S.; Holdaway, Alex; Van Voorhees, Elizabeth; O’Brien, Benjamin R.; Dew, Rachel; Chrisman, Allan K.

2014-01-01

Methylphenidate (MPH) is commonly prescribed for the treatment of Attention Deficit Hyperactivity Disorder (ADHD), and is often used illicitly by young adults. Illicit users often coadminister MPH with marijuana. Little is known about physiologic and subjective effects of these substances used in combination. In this double-blind, cross-over experiment, sixteen healthy adult subjects free from psychiatric illness (including ADHD) and reporting modest levels of marijuana use participated in 6 experimental sessions wherein all combinations of placebo or 10 mg oral doses of delta-9-tetrahydocannibinol (THC); and 0 mg, 10 mg and 40 mg of MPH were administered. Sessions were separated by at least 48 hours. Vital signs, subjective effects, and performance measure were collected. THC and MPH showed additive effects on heart rate and rate pressure product (e.g., peak heart rate for 10 mg THC + 0 mg, 10 mg, and 40 mg MPH = 89.1, 95.9, 102.0 beats/min, respectively). Main effects of THC and MPH were also observed on a range of subjective measures of drug effects, and significant THC dose × MPH dose interactions were found on measures of “Feel Drug,” “Good Effects,” and “Take Drug Again.” THC increased commission errors on a continuous performance test (CPT) and MPH reduced reaction time variability on this measure. Effects of THC, MPH, and their combination were variable on a measure of working memory (n-back task), though in general, MPH decreased reaction times and THC mitigated these effects. These results suggest that the combination of low to moderate doses of MPH and THC produces unique effects on cardiovascular function, subjective effects and performance measures. PMID:25175495
Procedural Sensitivities of Effect Sizes for Single-Case Designs with Directly Observed Behavioral Outcome Measures

ERIC Educational Resources Information Center

Pustejovsky, James E.

2018-01-01

A wide variety of effect size indices have been proposed for quantifying the magnitude of treatment effects in single-case designs. Commonly used measures include parametric indices such as the standardized mean difference, as well as non-overlap measures such as the percentage of non-overlapping data, improvement rate difference, and non-overlap…
Research on measurement method of optical camouflage effect of moving object

NASA Astrophysics Data System (ADS)

Wang, Juntang; Xu, Weidong; Qu, Yang; Cui, Guangzhen

2016-10-01

Camouflage effectiveness measurement as an important part of the camouflage technology, which testing and measuring the camouflage effect of the target and the performance of the camouflage equipment according to the tactical and technical requirements. The camouflage effectiveness measurement of current optical band is mainly aimed at the static target which could not objectively reflect the dynamic camouflage effect of the moving target. This paper synthetical used technology of dynamic object detection and camouflage effect detection, the digital camouflage of the moving object as the research object, the adaptive background update algorithm of Surendra was improved, a method of optical camouflage effect detection using Lab-color space in the detection of moving-object was presented. The binary image of moving object is extracted by this measurement technology, in the sequence diagram, the characteristic parameters such as the degree of dispersion, eccentricity, complexity and moment invariants are constructed to construct the feature vector space. The Euclidean distance of moving target which through digital camouflage was calculated, the results show that the average Euclidean distance of 375 frames was 189.45, which indicated that the degree of dispersion, eccentricity, complexity and moment invariants of the digital camouflage graphics has a great difference with the moving target which not spray digital camouflage. The measurement results showed that the camouflage effect was good. Meanwhile with the performance evaluation module, the correlation coefficient of the dynamic target image range 0.1275 from 0.0035, and presented some ups and down. Under the dynamic condition, the adaptability of target and background was reflected. In view of the existing infrared camouflage technology, the next step, we want to carry out the camouflage effect measurement technology of the moving target based on infrared band.
Integrating Behavioral Technology into Public Schools.

ERIC Educational Resources Information Center

Axelrod, Saul

1993-01-01

Suggests seven measures that behavioral educators can take to make effective educational procedures available in public schools: make dissemination of effective technology first priority; develop comprehensive educational systems; simplify existing effective procedures; create market for effective educational technology; obtain new measures of…
Moisture transfer through the membrane of a cross-flow energy recovery ventilator: Measurement and simple data-driven modeling

Treesearch

CR Boardman; Samuel V. Glass

2015-01-01

The moisture transfer effectiveness (or latent effectiveness) of a cross-flow, membrane based energy recovery ventilator is measured and modeled. Analysis of in situ measurements for a full year shows that energy recovery ventilator latent effectiveness increases with increasing average relative humidity and surprisingly increases with decreasing average temperature. A...
Scale effects on information theory-based measures applied to streamflow patterns in two rural watersheds

NASA Astrophysics Data System (ADS)

Pan, Feng; Pachepsky, Yakov A.; Guber, Andrey K.; McPherson, Brian J.; Hill, Robert L.

2012-01-01

SummaryUnderstanding streamflow patterns in space and time is important for improving flood and drought forecasting, water resources management, and predictions of ecological changes. Objectives of this work include (a) to characterize the spatial and temporal patterns of streamflow using information theory-based measures at two thoroughly-monitored agricultural watersheds located in different hydroclimatic zones with similar land use, and (b) to elucidate and quantify temporal and spatial scale effects on those measures. We selected two USDA experimental watersheds to serve as case study examples, including the Little River experimental watershed (LREW) in Tifton, Georgia and the Sleepers River experimental watershed (SREW) in North Danville, Vermont. Both watersheds possess several nested sub-watersheds and more than 30 years of continuous data records of precipitation and streamflow. Information content measures (metric entropy and mean information gain) and complexity measures (effective measure complexity and fluctuation complexity) were computed based on the binary encoding of 5-year streamflow and precipitation time series data. We quantified patterns of streamflow using probabilities of joint or sequential appearances of the binary symbol sequences. Results of our analysis illustrate that information content measures of streamflow time series are much smaller than those for precipitation data, and the streamflow data also exhibit higher complexity, suggesting that the watersheds effectively act as filters of the precipitation information that leads to the observed additional complexity in streamflow measures. Correlation coefficients between the information-theory-based measures and time intervals are close to 0.9, demonstrating the significance of temporal scale effects on streamflow patterns. Moderate spatial scale effects on streamflow patterns are observed with absolute values of correlation coefficients between the measures and sub-watershed area varying from 0.2 to 0.6 in the two watersheds. We conclude that temporal effects must be evaluated and accounted for when the information theory-based methods are used for performance evaluation and comparison of hydrological models.
Assessment of environmental improvement measures using a novel integrated model: a case study of the Shenzhen River catchment, China.

PubMed

Qin, Hua-Peng; Su, Qiong; Khu, Soon-Thiam

2013-01-15

Integrated water environmental management in a rapidly urbanizing area often requires combining social, economic and engineering measures in order to be effective. However, in reality, these measures are often considered independently by different planners, and decisions are made in a hierarchical manner; this has led to problems in environmental pollution control and also an inability to devise innovative solutions due to technological lock-in. In this paper, we use a novel coupled system dynamics and water environmental model (SyDWEM) to simulate the dynamic interactions between the socio-economic system, water infrastructure and receiving water in a rapidly urbanizing catchment in Shenzhen, China. The model is then applied to assess the effects of proposed socio-economic or engineering measures on environmental and development indicators in the catchment for 2011-2020. The results indicate that 1) measures to adjust industry structures have a positive effect on both water quantity and quality in the catchment; 2) measures to increase the labor productivity, the water use efficiency, the water transfer quota or the reclaimed wastewater reuse can alleviate the water shortage, but cannot improve water quality in the river; 3) measures to increase the wastewater treatment rate or the pollutant removal rate can improve water quality in the river, but have no effect on water shortage. Based on the effectiveness of the individual measures, a combination of socio-economic and engineering measures is proposed, which can achieve water environmental sustainability in the study area. Thus, we demonstrate that SyDWEM has the capacity to evaluate the effects of both socio-economic and engineering measures; it also provides a tool for integrated decision making by socio-economic and water infrastructure planners. Copyright © 2012 Elsevier Ltd. All rights reserved.
Research on effects of baffle position in an integrating sphere on the luminous flux measurement

NASA Astrophysics Data System (ADS)

Lin, Fangsheng; Li, Tiecheng; Yin, Dejin; Lai, Lei; Xia, Ming

2016-09-01

In the field of optical metrology, luminous flux is an important index to characterize the quality of electric light source. Currently, the majority of luminous flux measurement is based on the integrating sphere method, so measurement accuracy of integrating sphere is the key factor. There are plenty of factors affecting the measurement accuracy, such as coating, power and the position of light source. However, the baffle which is a key part of integrating sphere has important effects on the measurement results. The paper analyzes in detail the principle of an ideal integrating sphere. We use moving rail to change the relative position of baffle and light source inside the sphere. By experiments, measured luminous flux values at different distances between the light source and baffle are obtained, which we used to take analysis of the effects of different baffle position on the measurement. By theoretical calculation, computer simulation and experiment, we obtain the optimum position of baffle for luminous flux measurements. Based on the whole luminous flux measurement error analysis, we develop the methods and apparatus to improve the luminous flux measurement accuracy and reliability. It makes our unifying and transferring work of the luminous flux more accurate in East China and provides effective protection for our traceability system.
Measurement issues in the evaluation of chronic disease self-management programs.

PubMed

Nolte, Sandra; Elsworth, Gerald R; Newman, Stanton; Osborne, Richard H

2013-09-01

To provide an in-depth analysis of outcome measures used in the evaluation of chronic disease self-management programs consistent with the Stanford curricula. Based on a systematic review on self-management programs, effect sizes derived from reported outcome measures are categorized according to the quality of life appraisal model developed by Schwartz and Rapkin which classifies outcomes from performance-based measures (e.g., clinical outcomes) to evaluation-based measures (e.g., emotional well-being). The majority of outcomes assessed in self-management trials are based on evaluation-based methods. Overall, effects on knowledge--the only performance-based measure observed in selected trials--are generally medium to large. In contrast, substantially more inconsistent results are found for both perception- and evaluation-based measures that mostly range between nil and small positive effects. Effectiveness of self-management interventions and resulting recommendations for health policy makers are most frequently derived from highly variable evaluation-based measures, that is, types of outcomes that potentially carry a substantial amount of measurement error and/or bias such as response shift. Therefore, decisions regarding the value and efficacy of chronic disease self-management programs need to be interpreted with care. More research, especially qualitative studies, is needed to unravel cognitive processes and the role of response shift bias in the measurement of change.
The evolving landscape of quality measurement for heart failure

PubMed Central

Fitzgerald, Ashley A.; Allen, Larry A.; Masoudi, Frederick A.

2013-01-01

Heart failure (HF) is a major cause of mortality and morbidity, representing a leading cause of death and hospitalization among U.S. Medicare beneficiaries. Advances in science have generated effective interventions to reduce adverse outcomes in HF, particularly in patients with reduced left ventricular ejection fraction. Unfortunately, effective therapies for heart failure are often not utilized in an effective, safe, timely, equitable, patient-centered, and efficient manner. Further, the risk of adverse outcomes for HF remains high. The last decades have witnessed the growth of efforts to measure and improve the care and outcomes of patients with HF. This paper will review the evolution of quality measurement for HF, including a brief history of quality measurement in medicine; the measures that have been employed to characterize quality in heart failure; how the measures are obtained; how measures are employed; and present and future challenges surrounding quality measurement in heart failure. PMID:22548579
State dragging using the quantum Zeno effect

NASA Astrophysics Data System (ADS)

Hacohen-Gourgy, Shay; Martin, Leigh; GarcíA-Pintos, Luis Pedro; Dressel, Justin; Siddiqi, Irfan

The quantum Zeno effect is the suppression of Hamiltonian evolution by continuous measurement. It arises as a consequence of the quantum back-action pushing the state towards an eigenstate of the measurement operator. Rotating the operator at a rate much slower than the measurement rate will effectively drag the state with it. We use our recently developed scheme, which enables dynamic control of the measurement operator, to demonstrate this dragging effect on a superconducting transmon qubit. Since the system is continuously measured, the deterministic trajectory can be monitored, and quantum jumps can be detected in real-time. Furthermore, we perform this with two observables that are set to be either commuting or non-commuting, demonstrating new quantum dynamics. This work was supported by the Army Research Office and the Air Force Research Laboratory.
Effects of experiment start time and duration on measurement of standard physiological variables.

PubMed

Page, Amanda J; Cooper, Christine E; Withers, Philip C

2011-07-01

Duration and start time of respirometry experiments have significant effects on the measurement of basal values for several commonly measured physiological variables (metabolic rate, evaporative water loss and body temperature). A longer measurement duration reduced values for all variables for all start times, and this was an effect of reduced animal activity rather than random sampling. However, there was also an effect of circadian rhythm on the timing of minimal physiological values. Experiment start time had a significant effect on time taken to reach minimal values for all variables, ranging from 0400 hours ± 38 min (body temperature, start time 2300 hours) to 0854 hours ± 52 min (evaporative water loss, start time 1700 hours). It also influenced the time of day that minimal values were obtained, ranging from 2224 hours ± 40 min (carbon dioxide production, start time 1500 hours) to 0600 hours ± 57 min (oxygen consumption, start time 2300 hours), and the minimum values measured. Consequently, both the measurement duration and the experiment start time should be considered in experimental design to account for both a handling and a circadian effect on the animal's physiology. We suggest that experiments to measure standard physiological variables for small diurnal birds should commence between 1700 and 2100 hours, and measurement duration should be at least 9 h.
Eta Squared and Partial Eta Squared as Measures of Effect Size in Educational Research

ERIC Educational Resources Information Center

Richardson, John T. E.

2011-01-01

Eta squared measures the proportion of the total variance in a dependent variable that is associated with the membership of different groups defined by an independent variable. Partial eta squared is a similar measure in which the effects of other independent variables and interactions are partialled out. The development of these measures is…
Effect Sizes and their Intervals: The Two-Level Repeated Measures Case

ERIC Educational Resources Information Center

Algina, James; Keselman, H. J.; Penfield, Randall D.

2005-01-01

Probability coverage for eight different confidence intervals (CIs) of measures of effect size (ES) in a two-level repeated measures design was investigated. The CIs and measures of ES differed with regard to whether they used least squares or robust estimates of central tendency and variability, whether the end critical points of the interval…
Measuring the Effect of Tourism Services on Travelers' Quality of Life: Further Validation.

ERIC Educational Resources Information Center

Neal, Janet D.; Sirgy, M. Joseph; Uysal, Muzaffer

2004-01-01

lication and extension study provided additional validational support of the original tourism services satisfaction measure in relation to QOL-related measures.Neal, Sirgy and Uysal (1999) developed a model and a measure to capture the effect of tourism services on travelers' quality of life (QOL). They hypothesized that travelers' overall life…

The effect of sensor sheltering and averaging techniques on wind measurements at the Shuttle Landing Facility

NASA Technical Reports Server (NTRS)

Merceret, Francis J.

1995-01-01

This document presents results of a field study of the effect of sheltering of wind sensors by nearby foliage on the validity of wind measurements at the Space Shuttle Landing Facility (SLF). Standard measurements are made at one second intervals from 30-feet (9.1-m) towers located 500 feet (152 m) from the SLF centerline. The centerline winds are not exactly the same as those measured by the towers. A companion study, Merceret (1995), quantifies the differences as a function of statistics of the observed winds and distance between the measurements and points of interest. This work examines the effect of nearby foliage on the accuracy of the measurements made by any one sensor, and the effects of averaging on interpretation of the measurements. The field program used logarithmically spaced portable wind towers to measure wind speed and direction over a range of conditions as a function of distance from the obstructing foliage. Appropriate statistics were computed. The results suggest that accurate measurements require foliage be cut back to OFCM standards. Analysis of averaging techniques showed that there is no significant difference between vector and scalar averages. Longer averaging periods reduce measurement error but do not otherwise change the measurement in reasonably steady flow regimes. In rapidly changing conditions, shorter averaging periods may be required to capture trends.
Developing Content Knowledge for Teaching Assessments for the Measures of Effective Teaching Study. Research Report. ETS RR-14-33

ERIC Educational Resources Information Center

Phelps, Geoffrey; Weren, Barbara; Croft, Andrew; Gitomer, Drew

2014-01-01

This report documents the development of assessments of content knowledge for teaching (CKT) as part of the Measures of Effective Teaching (MET) study, funded by the Bill and Melinda Gates Foundation.The MET study was designed to develop a set of measures that together serve as an accurate indicator of teaching effectiveness. The study was…
Chemical and biological relationships relevant to the effect of acid rainfall on the soil-plant system

Treesearch

Marvin Nyborg

1976-01-01

This paper deals with problems of measuring acidity in rainfall and the interpretation of these measurements in terms of effects on the soil-plant system. Theoretical relationships of the carbon-dioxide-bicarbonate equalibria and its effect on rainfall acidity measurements are given. The relationship of a cation-anion balance model of acidity in rainfall to plant...
Research on the relationship of the probe system for the swing arm profilometer based on the point source microscope

NASA Astrophysics Data System (ADS)

Gao, Mingxing; Jing, Hongwei; Cao, Xuedong; Chen, Lin; Yang, Jie

2015-08-01

When using the swing arm profilometer (SAP) to measure the aspheric mirror and the off-axis aspheric mirror, the error of the effective arm length of the SAP has an obvious influence on the measurement result. In order to reduce the influence of the effective arm length and increase the measurement accuracy of the SAP, the laser tracker is adopted to measure the effective arm length. Because the space position relationship of the probe system for the SAP is needed to measured before using the laser tracker, the point source microscope (PSM) is used to measure the space positional relationship. The measurement principle of the PSM and other applications are introduced; the accuracy and repeatability of this technology are analysed; the advantages and disadvantages of this technology are summarized.
Experimental investigation on the coupled effect of effective stress and gas slippage on the permeability of shale.

PubMed

Yang, Diansen; Wang, Wei; Chen, Weizhong; Wang, Shugang; Wang, Xiaoqiong

2017-03-17

Permeability is one of the most important parameters to evaluate gas production in shale reservoirs. Because shale permeability is extremely low, gas is often used in the laboratory to measure permeability. However, the measured apparent gas permeability is higher than the intrinsic permeability due to the gas slippage effect, which could be even more dominant for materials with nanopores. Increasing gas pressure during tests reduces gas slippage effect, but it also decreases the effective stress which in turn influences the permeability. The coupled effect of gas slippage and effective stress on shale permeability remains unclear. Here we perform laboratory experiments on Longmaxi shale specimens to explore the coupled effect. We use the pressure transient method to measure permeability under different stress and pressure conditions. Our results reveal that the apparent measured permeability is controlled by these two competing effects. With increasing gas pressure, there exists a pressure threshold at which the dominant effect on permeability switches from gas slippage to effective stress. Based on the Klinkenberg model, we propose a new conceptual model that incorporates both competing effects. Combining microstructure analysis, we further discuss the roles of stress, gas pressure and water contents on gas permeability of shale.
Counterfactual Measurements and the Quantum Zeno Effect

NASA Astrophysics Data System (ADS)

Russo, Onofrio; Jiang, Liang

2014-03-01

The apparent paradoxical paradigm of an interaction free measurement (counterfactual measurement) of the presence of a classical or quantum object without any scattering or absorption of photons is considered in light of the quantum Zeno effect. From one perspective, the counterfactual measurement in principle is consistent with minimizing the interaction between the object and the photon. However, the quantum Zeno effect mandates that repeated interactions with photons (although weakly coupled) are required and necessary to inhibit the coherent evolution of the state of the system. We consider and appraise these seemingly conflicting concepts.
Measuring the Immeasurable: An Approach to Assessing the Effectiveness of Engineering Civic Assistance Projects Towards Achieving National Security Objectives

DTIC Science & Technology

2015-06-12

MEASURING THE IMMEASURABLE: AN APPROACH TO ASSESSING THE EFFECTIVENESS OF ENGINEERING CIVIC ASSISTANCE PROJECTS TOWARDS ACHIEVING...SUBTITLE Measuring the Immeasurable: An Approach to Assessing the Effectiveness of Engineering Civic Assistance Projects Towards Achieving National...increasing reliance on Humanitarian and Civic Assistance (HCA), specifically engineering civic assistance projects (ENCAPs), as a way to shape the
Evaluation of the uncertainties associated with in vivo X-ray fluorescence bone lead calibrations

NASA Astrophysics Data System (ADS)

Lodwick, Jeffrey C.

An anthropometric leg phantom developed at the University of Cincinnati (UC) was used to evaluate the effects that changes in leg position and variation between subjects has on in vivo x-ray fluorescence (XRF) measurements of stable lead in bone. The changes in leg position that were evaluated include changes in source-phantom distance ranging between 0.0 mm and 30.0 mm and phantom rotation over 40 degrees. Source-phantom distance was determined to have a significant effect on XRF measurement results particularly at source-phantom distances greater than 10.0 mm. Rotation of the leg phantom through 40 degrees was determined to have no significant effect on XRF measurement results. Between subject factors that were evaluated include bone calcium content and overlying tissue thickness. Bone calcium content was determined to have a significant effect on XRF measurements when measuring lead in micrograms per gram bone material. However, if measurement results of micrograms of lead per gram calcium (or per gram bone mineral) is used the normalization method makes the change in calcium content not significant. Overlying tissue thickness was determined to have no significant effect on XRF measurement results with tissue thickness ranging between 5.7 and 11.62 mm. The UC leg phantom was modified to include a fibula bone phantom so that the effect that the fibula has on XRF measurement results could be evaluated. The fibula was determined to have no significant effect on XRF measurement results and in the future need not be incorporated into in vivo XRF calibration phantoms. A knee phantom was also developed for purposes of calibrations of in vivo XRF measurement of lead in the patella. XRF measurement results using this phantom were compared to results of XRF measurements made using the plaster-of-Paris (POP) phantoms. A significant difference was observed between the normalized count rates of the two phantom types when either micrograms of lead per gram of bone material or micrograms of lead per gram calcium (bone mineral) is used as the lead content. This difference is consistent with what is observed in real in vivo XRF measurements and indicates the need for the correction factors that are used.
Measuring organizational effectiveness in information and communication technology companies using item response theory.

PubMed

Trierweiller, Andréa Cristina; Peixe, Blênio César Severo; Tezza, Rafael; Pereira, Vera Lúcia Duarte do Valle; Pacheco, Waldemar; Bornia, Antonio Cezar; de Andrade, Dalton Francisco

2012-01-01

The aim of this paper is to measure the effectiveness of the organizations Information and Communication Technology (ICT) from the point of view of the manager, using Item Response Theory (IRT). There is a need to verify the effectiveness of these organizations which are normally associated to complex, dynamic, and competitive environments. In academic literature, there is disagreement surrounding the concept of organizational effectiveness and its measurement. A construct was elaborated based on dimensions of effectiveness towards the construction of the items of the questionnaire which submitted to specialists for evaluation. It demonstrated itself to be viable in measuring organizational effectiveness of ICT companies under the point of view of a manager through using Two-Parameter Logistic Model (2PLM) of the IRT. This modeling permits us to evaluate the quality and property of each item placed within a single scale: items and respondents, which is not possible when using other similar tools.
In Situ Effective Diffusion Coefficient Profiles in Live Biofilms Using Pulsed-Field Gradient Nuclear Magnetic Resonance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renslow, Ryan S.; Majors, Paul D.; McLean, Jeffrey S.

2010-08-15

Diffusive mass transfer in biofilms is characterized by the effective diffusion coefficient. It is well-documented that the effective diffusion coefficient can vary by location in a biofilm. The current literature is dominated by effective diffusion coefficient measurements for distinct cell clusters and stratified biofilms showing this spatial variation. Regardless of whether distinct cell clusters or surface-averaging methods are used, position-dependent measurements of the effective diffusion coefficient are currently: 1) invasive to the biofilm, 2) performed under unnatural conditions, 3) lethal to cells, and/or 4) spatially restricted to only certain regions of the biofilm. Invasive measurements can lead to inaccurate resultsmore » and prohibit further (time dependent) measurements which are important for the mathematical modeling of biofilms. In this study our goals were to: 1) measure the effective diffusion coefficient for water in live biofilms, 2) monitor how the effective diffusion coefficient changes over time under growth conditions, and 3) correlate the effective diffusion coefficient with depth in the biofilm. We measured in situ two-dimensional effective diffusion coefficient maps within Shewanella oneidensis MR-1biofilms using pulsed-field gradient nuclear magnetic resonance methods, and used them to calculate surface-averaged relative effective diffusion coefficient (Drs) profiles. We found that 1) Drs decreased from the top of the biofilm to the bottom, 2) Drs profiles differed for biofilms of different ages, 3) Drs profiles changed over time and generally decreased with time, 4) all the biofilms showed very similar Drs profiles near the top of the biofilm, and 5) the Drs profile near the bottom of the biofilm was different for each biofilm. Practically, our results demonstrate that advanced biofilm models should use a variable effective diffusivity which changes with time and location in the biofilm.« less
Derivation and interpretation of hazard quotients to assess ecological risks from the cultivation of insect-resistant transgenic crops.

PubMed

Raybould, Alan; Caron-Lormier, Geoffrey; Bohan, David A

2011-06-08

Cost-effective and rigorous risk assessments for chemicals may be based on hazard quotients (HQs): the ratio of a measure of exposure to a substance and a measure of the effect of that substance. HQs have been used for many years in ecological risk assessments for the use of synthetic pesticides in agriculture, and methods for calculating pesticide HQs have been adapted for use with transgenic crops. This paper describes how laboratory methods for assessing the ecotoxicological effects of synthetic pesticides have been modified for the measurement of effects of insecticidal proteins, and how these effect measures are combined with exposure estimates to derive HQs for assessing the ecological risks from the cultivation of insect-resistant transgenic crops. The potential for ecological modeling to inform the design of laboratory effects tests for insecticidal proteins is also discussed.
The specificity of the effects of stimulant medication on classroom learning-related measures of cognitive processing for attention deficit disorder children.

PubMed

Balthazor, M J; Wagner, R K; Pelham, W E

1991-02-01

There appear to be beneficial effects of stimulant medication on daily classroom measures of cognitive functioning for Attention Deficit Disorder (ADD) children, but the specificity and origin of such effects is unclear. Consistent with previous results, 0.3 mg/kg methylphenidate improved ADD children's performance on a classroom reading comprehension measure. Using the Posner letting-matching task and four additional measures of phonological processing, we attempted to isolate the effects of methylphenidate to parameter estimates of (a) selective attention, (b) the basic cognitive process of retrieving name codes from permanent memory, and (c) a constant term that represented nonspecific aspects of information processing. Responses to the letter-matching stimuli were faster and more accurate with medication compared to placebo. The improvement in performance was isolated to the parameter estimate that reflected nonspecific aspects of information processing. A lack of medication effect on the other measures of phonological processing supported the Posner task findings in indicating that methylphenidate appears to exert beneficial effects on academic processing through general rather than specific aspects of information processing.
How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis.

PubMed

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A G; Fahrig, Lenore; Findlay, C Scott; Houlahan, Jeff; van der Ree, Rodney; van der Grift, Edgar A

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these measures vary greatly. We conducted a meta-analysis using data from 50 studies that quantified the relationship between road-kill and a mitigation measure designed to reduce road-kill. Overall, mitigation measures reduce road-kill by 40% compared to controls. Fences, with or without crossing structures, reduce road-kill by 54%. We found no detectable effect on road-kill of crossing structures without fencing. We found that comparatively expensive mitigation measures reduce large mammal road-kill much more than inexpensive measures. For example, the combination of fencing and crossing structures led to an 83% reduction in road-kill of large mammals, compared to a 57% reduction for animal detection systems, and only a 1% for wildlife reflectors. We suggest that inexpensive measures such as reflectors should not be used until and unless their effectiveness is tested using a high-quality experimental approach. Our meta-analysis also highlights the fact that there are insufficient data to answer many of the most pressing questions that road planners ask about the effectiveness of road mitigation measures, such as whether other less common mitigation measures (e.g., measures to reduce traffic volume and/or speed) reduce road mortality, or to what extent the attributes of crossing structures and fences influence their effectiveness. To improve evaluations of mitigation effectiveness, studies should incorporate data collection before the mitigation is applied, and we recommend a minimum study duration of four years for Before-After, and a minimum of either four years or four sites for Before-After-Control-Impact designs.
How Effective Is Road Mitigation at Reducing Road-Kill? A Meta-Analysis

PubMed Central

Rytwinski, Trina; Soanes, Kylie; Jaeger, Jochen A. G.; Fahrig, Lenore; Findlay, C. Scott; Houlahan, Jeff; van der Ree, Rodney; van der Grift, Edgar A

2016-01-01

Road traffic kills hundreds of millions of animals every year, posing a critical threat to the populations of many species. To address this problem there are more than forty types of road mitigation measures available that aim to reduce wildlife mortality on roads (road-kill). For road planners, deciding on what mitigation method to use has been problematic because there is little good information about the relative effectiveness of these measures in reducing road-kill, and the costs of these measures vary greatly. We conducted a meta-analysis using data from 50 studies that quantified the relationship between road-kill and a mitigation measure designed to reduce road-kill. Overall, mitigation measures reduce road-kill by 40% compared to controls. Fences, with or without crossing structures, reduce road-kill by 54%. We found no detectable effect on road-kill of crossing structures without fencing. We found that comparatively expensive mitigation measures reduce large mammal road-kill much more than inexpensive measures. For example, the combination of fencing and crossing structures led to an 83% reduction in road-kill of large mammals, compared to a 57% reduction for animal detection systems, and only a 1% for wildlife reflectors. We suggest that inexpensive measures such as reflectors should not be used until and unless their effectiveness is tested using a high-quality experimental approach. Our meta-analysis also highlights the fact that there are insufficient data to answer many of the most pressing questions that road planners ask about the effectiveness of road mitigation measures, such as whether other less common mitigation measures (e.g., measures to reduce traffic volume and/or speed) reduce road mortality, or to what extent the attributes of crossing structures and fences influence their effectiveness. To improve evaluations of mitigation effectiveness, studies should incorporate data collection before the mitigation is applied, and we recommend a minimum study duration of four years for Before-After, and a minimum of either four years or four sites for Before-After-Control-Impact designs. PMID:27870889
Interaction of participant characteristics and type of AAC with individuals with ASD: a meta-analysis.

PubMed

Ganz, Jennifer B; Mason, Rose A; Goodwyn, Fara D; Boles, Margot B; Heath, Amy K; Davis, John L

2014-11-01

Individuals with autism spectrum disorders (ASD) and complex communication needs often rely on augmentative and alternative communication (AAC) as a means of functional communication. This meta-analysis investigated how individual characteristics moderate effectiveness of three types of aided AAC: the Picture Exchange Communication System (PECS), speech-generating devices (SGDs), and other picture-based AAC. Effectiveness was measured via the Improvement Rate Difference. Results indicated that AAC has small to moderate effects on speech outcomes, and that SGDs appear to be most effective when considering any outcome measure with individuals with ASD without comorbid intellectual/developmental disorders (IDD). PECS appears to be most effective when considering any outcome measure with individuals with ASD and IDD. SGDs and PECS were the most effective type of AAC for preschoolers, when aggregating across outcome measures. No difference was found between systems for elementary-aged and older individuals.
Effects of measurement resolution on the analysis of temperature time series for stream-aquifer flux estimation

NASA Astrophysics Data System (ADS)

Soto-López, Carlos D.; Meixner, Thomas; Ferré, Ty P. A.

2011-12-01

From its inception in the mid-1960s, the use of temperature time series (thermographs) to estimate vertical fluxes has found increasing use in the hydrologic community. Beginning in 2000, researchers have examined the impacts of measurement and parameter uncertainty on the estimates of vertical fluxes. To date, the effects of temperature measurement discretization (resolution), a characteristic of all digital temperature loggers, on the determination of vertical fluxes has not been considered. In this technical note we expand the analysis of recently published work to include the effects of temperature measurement resolution on estimates of vertical fluxes using temperature amplitude and phase shift information. We show that errors in thermal front velocity estimation introduced by discretizing thermographs differ when amplitude or phase shift data are used to estimate vertical fluxes. We also show that under similar circumstances sensor resolution limits the range over which vertical velocities are accurately reproduced more than uncertainty in temperature measurements, uncertainty in sensor separation distance, and uncertainty in the thermal diffusivity combined. These effects represent the baseline error present and thus the best-case scenario when discrete temperature measurements are used to infer vertical fluxes. The errors associated with measurement resolution can be minimized by using the highest-resolution sensors available. But thoughtful experimental design could allow users to select the most cost-effective temperature sensors to fit their measurement needs.
Some Relationships Among and Between Measures of Employee Perceptions and Other Indices of Organizational Effectiveness. Research Report No. 5.

ERIC Educational Resources Information Center

Schneider, Benjamin; Synder, Robert A.

Relationships among two measures of job satisfaction and one of organizational climate, among seven production and turnover indices of organizational effectiveness, and between the two sets of measures were investigated in 50 life insurance agencies (N=522). It was shown that: (1) climate and satisfaction measures are correlated for some people…
Analysis and Correction of Diffraction Effect on the B/A Measurement at High Frequencies

NASA Astrophysics Data System (ADS)

Zhang, Dong; Gong, Xiu-Fen; Liu, Xiao-Zhou; Kushibiki, Jun-ichi; Nishino, Hideo

2004-01-01

A numerical method is developed to analyse and to correct the diffraction effect in the measurement of acoustic nonlinearity parameter B/A at high frequencies. By using the KZK nonlinear equation and the superposition approach of Gaussian beams, an analytical model is derived to describe the second harmonic generation through multi-layer medium SiO2/liquid specimen/SiO2. Frequency dependence of the nonlinear characterization curve for water in 110-155 MHz is numerically and experimentally investigated. With the measured dip position and the new model, values of B/A for water are evaluated. The results show that the present method can effectively correct the diffraction effect in the measurement.
Effects of competition on hospital quality: an examination using hospital administrative data.

PubMed

Palangkaraya, Alfons; Yong, Jongsay

2013-06-01

This paper investigates the effects of competition on hospital quality using hospital administration data from the State of Victoria, Australia. Hospital quality is measured by 30-day mortality rates and 30-day unplanned readmission rates. Competition is measured by Herfindahl-Hirschman index and the numbers of competing public and private hospitals. The paper finds that hospitals facing higher competition have lower unplanned admission rates. However, competition is related negatively to hospital quality when measured by mortality, albeit the effects are weak and barely statistically significant. The paper also finds that the positive effect of competition on quality as measured by unplanned readmission differs greatly depending on whether the hospital is publicly or privately owned.
An evaluation of edge effects in nutritional accessibility and availability measures: a simulation study

PubMed Central

2010-01-01

Background This paper addresses the statistical use of accessibility and availability indices and the effect of study boundaries on these measures. The measures are evaluated via an extensive simulation based on cluster models for local outlet density. We define outlet to mean either food retail store (convenience store, supermarket, gas station) or restaurant (limited service or full service restaurants). We designed a simulation whereby a cluster outlet model is assumed in a large study window and an internal subset of that window is constructed. We performed simulations on various criteria including one scenario representing an urban area with 2000 outlets as well as a non-urban area simulated with only 300 outlets. A comparison is made between estimates obtained with the full study area and estimates using only the subset area. This allows the study of the effect of edge censoring on accessibility measures. Results The results suggest that considerable bias is found at the edges of study regions in particular for accessibility measures. Edge effects are smaller for availability measures (when not smoothed) and also for short range accessibility Conclusions It is recommended that any study utilizing these measures should correct for edge effects. The use of edge correction via guard areas is recommended and the avoidance of large range distance-based accessibility measures is also proposed. PMID:20663199

Measurement of the transient shielding effectiveness of shielding cabinets

NASA Astrophysics Data System (ADS)

Herlemann, H.; Koch, M.

2008-05-01

Recently, new definitions of shielding effectiveness (SE) for high-frequency and transient electromagnetic fields were introduced by Klinkenbusch (2005). Analytical results were shown for closed as well as for non closed cylindrical shields. In the present work, the shielding performance of different shielding cabinets is investigated by means of numerical simulations and measurements inside a fully anechoic chamber and a GTEM-cell. For the GTEM-cell-measurements, a downscaled model of the shielding cabinet is used. For the simulations, the numerical tools CONCEPT II and COMSOL MULTIPHYSICS were available. The numerical results agree well with the measurements. They can be used to interpret the behaviour of the shielding effectiveness of enclosures as function of frequency. From the measurement of the electric and magnetic fields with and without the enclosure in place, the electric and magnetic shielding effectiveness as well as the transient shielding effectiveness of the enclosure are calculated. The transient SE of four different shielding cabinets is determined and discussed.
Adaptation or recovery after health shocks? Evidence using subjective and objective health measures.

PubMed

Baji, Petra; Bíró, Anikó

2018-05-01

In this paper, we analyse the effect of an onset of a health shock on subjective survival probability and compare it with objective survival probability and self-reported health measures. In particular, we are interested in whether expectations of people respond to health shocks and whether these follow the evolution of objective life expectations and self-reported health measures over time. Using longitudinal data from the Health and Retirement Study, we estimate fixed effects models of adaptation for the objective and subjective survival probabilities and for some self-reported health measures. The results show that after cancer diagnosis, conditional on surviving, both the objective and subjective longevity and self-reported health measures drift back to the before diagnosis trajectories. For stroke and heart attack, in spite of their persistent negative effect on survival, subjective life expectations and self-reported health measures seem to indicate only a transient effect of the health shock. The differences between the objective and subjective measures are in line with the concept of adaptation. We discuss the policy implications of our results. Copyright © 2018 John Wiley & Sons, Ltd.
Intra-rater Reliability of Arm and Hand Muscle Strength Measurements in Persons With Late Effects of Polio.

PubMed

Brogårdh, Christina; Flansbjer, Ulla-Britt; Carlsson, Håkan; Lexell, Jan

2015-10-01

Muscle weakness in the upper limb is common in persons with late effects of polio. To be able to measure muscle strength and follow changes over time, reliable measurements are needed. To evaluate the intra-rater reliability of isometric and isokinetic arm and hand muscle strength measurements in persons with late effects of polio. A test-retest design. A university hospital outpatient clinic. Twenty-eight persons (mean age 68 years, SD 11 years) with late effects of polio in their upper limbs. Isometric shoulder abduction, isokinetic concentric elbow flexion and extension, isometric elbow flexion, and isometric grip strength were measured twice, 14 days apart. Reliability was evaluated with the intra-class correlation coefficient, the mean difference between the test sessions (d¯), together with the 95% confidence intervals for d¯ , the standard error of measurement (SEM and SEM%), the smallest real difference (SRD and SRD%), and Bland-Altman graphs. A fixed dynamometer (Biodex) was used to measure arm strength and an electronic dynamometer (GRIP-it) was used to measure grip strength. Intra-rater reliability was high, with intra-class correlation coefficients between 0.87 and 0.98. The SEM%, representing the smallest change for a group of persons, ranged from 7%-24% for all strength measurements, and the SRD%, representing the smallest change for an individual person, ranged from 20%-67%. Muscle strength in the upper limbs can be reliably measured in persons with late effects of polio. However, the measurement errors indicate that the method is more suitable to detect changes in muscle strength for a group of persons than for an individual person. Copyright © 2015 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.
The episode-free day as a composite measure of effectiveness: an illustrative economic evaluation of formoterol versus salbutamol in asthma therapy.

PubMed

Sculpher, M J; Buxton, M J

1993-11-01

The construction of a composite effectiveness measure was explored using clinical data collected routinely in trials of drug therapies for asthma. The measure is the episode-free day (EFD), where an 'episode' is either an asthma attack, the need for rescue medication, sleep disturbance caused by asthma, or an adverse event. The EFD measure was used in a retrospective cost-effectiveness analysis of a previous Phase III controlled clinical trial of formoterol versus salbutamol, in which 145 patients with bronchial asthma were randomised to receive maintenance therapy with either inhaled formoterol or inhaled salbutamol over a 12-week period. Average and incremental cost-effectiveness ratios were assessed for the 2 drugs in terms of the total expected cost of drug plus rescue therapy, and EFD rates. The analysis suggests that, with relatively little addition to clinical data collection, economically and clinically meaningful composite measures can be constructed to assist in making cost-effectiveness comparisons between alternative asthma therapies.
Effect of occupational safety measures on micronucleus frequency in semiconductor workers.

PubMed

Winker, Robert; Roos, Gerhard; Pilger, Alexander; Rüdiger, Hugo W

2008-02-01

To examine whether semiconductor workers exposed to complex mixtures of chemical waste show an increase in genotoxic effects, and, if so, whether occupational safety measures protect these workers. To assess chemical exposure in the workplace, air monitoring of boron trifluoride and boron trichloride was performed and urinary concentrations of fluoride were measured. The cytokinesis-block micronucleus test on isolated lymphocytes was used for the detection of genotoxic effects. Two series of monitoring have been performed in order to assess the effect of implemented protection measures. We found a significantly higher mean frequency of micronuclei in exposed workers than in controls, whereas air monitoring and measurement of urinary fluoride failed to detect chemical exposure of these workers. Twelve years after implementation of protective measures, the mean level of micronuclei in exposed individuals was found to be as low as those from controls. These findings indicate that exposed workers in the semiconductor industry may have an increased risk of genotoxic effects from complex mixtures of chemical waste products. The decline of the mean level of micronuclei in exposed workers down to the base level of controls after implementation of protective measures points to the significance of adequate safety standards to protect against chromosomal damage in semiconductor personnel.
[Analysis of variance of repeated data measured by water maze with SPSS].

PubMed

Qiu, Hong; Jin, Guo-qin; Jin, Ru-feng; Zhao, Wei-kang

2007-01-01

To introduce the method of analyzing repeated data measured by water maze with SPSS 11.0, and offer a reference statistical method to clinical and basic medicine researchers who take the design of repeated measures. Using repeated measures and multivariate analysis of variance (ANOVA) process of the general linear model in SPSS and giving comparison among different groups and different measure time pairwise. Firstly, Mauchly's test of sphericity should be used to judge whether there were relations among the repeatedly measured data. If any (P
Experimental determination of the effective point of measurement of cylindrical ionization chambers for high-energy photon and electron beams.

PubMed

Huang, Yanxiao; Willomitzer, Christian; Zakaria, Golam Abu; Hartmann, Guenther H

2010-01-01

Measurements of depth-dose curves in water phantom using a cylindrical ionization chamber require that its effective point of measurement is located at the measuring depth. Recommendations for the position of the effective point of measurement with respect to the central axis valid for high-energy electron and photon beams are given in dosimetry protocols. According to these protocols, the use of a constant shift P(eff) is currently recommended. However, this is still based on a very limited set of experimental results. It is therefore expected that an improved knowledge of the exact position of the effective point of measurement will further improve the accuracy of dosimetry. Recent publications have revealed that the position of the effective point of measurement is indeed varying with beam energy, field size and also with chamber geometry. The aim of this study is to investigate whether the shift of P(eff) can be taken to be constant and independent from the beam energy. An experimental determination of the effective point of measurement is presented based on a comparison between cylindrical chambers and a plane-parallel chamber using conventional dosimetry equipment. For electron beams, the determination is based on the comparison of halfvalue depth R(50) between the cylindrical chamber of interest and a well guarded plane-parallel Roos chamber. For photon beams, the depth of dose maximum, d(max), the depth of 80% dose, d(80), and the dose parameter PDD(10) were used. It was again found that the effective point of measurement for both, electron and photon beams Dosimetry, depends on the beam energy. The deviation from a constant value remains very small for photons, whereas significant deviations were found for electrons. It is therefore concluded that use of a single upstream shift value from the centre of the cylindrical chamber as recommended in current dosimetry protocols is adequate for photons, however inadequate for accurate electron beam dosimetry.
Plume Characteristics of the Busek 600 W Hall Thruster

DTIC Science & Technology

2006-07-12

that can then be applied to estimate the effect of the energetic plume on complex spacecraft geometries. Early measurement of plume properties, such...produced a measurable effect on ion current density and plume divergence, experimentally showing an increase or decrease of ±15-20%. Ionic energy...can then be applied to estimate the effect of the energetic plume on complex spacecraft geometries. Early measurement of plume properties, such as plume
Poster — Thur Eve — 53: Novel Technique for the Measurement of Ultra-Superficial Doses Using Gafchromic Film

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marcos, M.; Devic, S.

2014-08-15

Purpose: Dose build-up and electron contamination are two closely related quantities with important implications in radiotherapy, yet they are quite difficult to measure with great certainty. We present a novel technique for measuring ultra-superficial doses. Method and Materials: We used Gafchromic EBT-3 film which have an effective point of measurement of roughly 153 micros (effective depth in water). By peeling off one of the polyester layers, the active layer becomes the top layer and we obtain a film with a effective point of measurement of 15 microns (effective depth in water). A film calibration was performed using a 180 kVpmore » orthovoltage beam. Since the active layer of the film may have been compressed or perturbed during the peeling of clear polyester we use a triple-channel film calibration technique to minimize the effects of non-uniformity in the active layer. We measured surface doses of orthovoltage beams with lead cutouts in place to introduce contaminant photoelectrons. Results: Our measurements show that the dose enhancement near the edges of the lead were about 125% relative to central axis for 6 cm diameter cutouts up to 170% for 2 cm diameter cutouts, which were within 5% of our EGSnrc based Monte Carlo simulations.« less
Oxygen effects on glucose measurements with a reference analyzer and three handheld meters.

PubMed

Tang, Z; Louie, R F; Payes, M; Chang, K C; Kost, G J

2000-01-01

Oxygen may affect glucose meter and reference analyzer measurements. We evaluated the effects of changes in blood oxygen tension (Po2) on Accu-Chek Comfort Curve (Roche Diagnostics, Indianapolis, IN), Precision G, (Abbott Laboratories, Bedford, MA) and One Touch II (Lifescan, Milpitas, CA) glucose meter measurements, and on Yellow Springs Instruments (YSI) (Yellow Springs, OH) reference analyzer measurements. Venous blood drawn from healthy volunteers was adjusted to three glucose levels of 80, 200, and 400 mg/dL, each tonometered with six different Po2 levels (40, 80, 160, 240, 320, and 400 torr). To quantitate oxygen effects on reference analyzer measurements, glucose differences between test sample (Po2 changed) and control (Po2 80 torr) were calculated (YSItest-YSIcontrol). The threshold for determination of oxygen effects was +/-2 SD, where 2 SD was fro
FMCSA safety program effectiveness measurement compliance review effectiveness model results for carriers with compliance reviews in fiscal year 2009 : [analysis brief].

DOT National Transportation Integrated Search

2014-04-01

This Analysis Brief documents the methodology and results from the Compliance Review Effectiveness Model (CREM) for carriers receiving CRs in fiscal year (FY) 2009. The model measures the effectiveness of the compliance review (CR) program, one of th...
Study on the application of ambient vibration tests to evaluate the effectiveness of seismic retrofitting

NASA Astrophysics Data System (ADS)

Liang, Li; Takaaki, Ohkubo; Guang-hui, Li

2018-03-01

In recent years, earthquakes have occurred frequently, and the seismic performance of existing school buildings has become particularly important. The main method for improving the seismic resistance of existing buildings is reinforcement. However, there are few effective methods to evaluate the effect of reinforcement. Ambient vibration measurement experiments were conducted before and after seismic retrofitting using wireless measurement system and the changes of vibration characteristics were compared. The changes of acceleration response spectrum, natural periods and vibration modes indicate that the wireless vibration measurement system can be effectively applied to evaluate the effect of seismic retrofitting. The method can evaluate the effect of seismic retrofitting qualitatively, it is difficult to evaluate the effect of seismic retrofitting quantitatively at this stage.
Physical optics for oven-plate scattering prediction

NASA Technical Reports Server (NTRS)

Baldauf, J.; Lambert, K.

1991-01-01

An oven assembly design is described, which will be used to determine the effects of temperature on the electrical properties of materials which are used as coatings for metal plates. Experimentally, these plates will be heated to a very high temperature in the oven assembly, and measured using a microwave reflectance measurement system developed for the NASA Lewis Research Center, Near-Field Facility. One unknown in this measurement is the effect that the oven assembly will have on the reflectance properties of the plate. Since the oven will be much larger than the plate, the effect could potentially be significant as the size of the plate becomes smaller. Therefore, it is necessary to predict the effect of the oven on the measurement of the plate. A method for predicting the oven effect is described, and the theoretical oven effect is compared to experimental results of the oven material. The computer code which is used to predict the oven effect is also described.
Urban geometry effects on the microclimate of streets near the river

NASA Astrophysics Data System (ADS)

Park, C.; Lee, D. K.; Asawa, T.; Murakami, A.; Kim, H. G.; Jeong, W.

2016-12-01

These days, many urbans have undergone urban heat islands (UHIs) which mean urban areas have higher temperature than surrounding areas. Because of UHIs, extreme heat waves and tropical nights threaten citizen's health. For reducing UHI effects, UHIs mitigation strategies related with urban planning (cooling elements, urban geometry, and urban materials) are studied in many fields. Especially, cooling elements such as vegetation and water are important for making sustainable cities. However, while the each effects of cooling elements are known, combination effects between urban geometry and elements are not clearly defined. To determine which urban geometry is effective to decrease air temperature, we analyzed urban geometry effects on the microclimate of streets near the river. The urban streets located in commercial area near the Cheonggye River and they had different aspect ratio. For doing this, we used field measurement. Field measurement were takin in the sunny days of July and August 2016. Air temperature measurement used T-type thermometers with cylindrical tube and ventilation fan. Wind measurements used kestrel 4500 for wind speed and wind direction. We measured air temperature in the screen level and repeated three times an hour. Measurement results showed that large aspect ratio street show lower air temperature than small ones. And they received cooling effect farther than others from the river. This is because that cooling air flows well in the wide road streets. Large aspect ratio streets are effective to receive river's cooling air. These results can be used in the urban geometry planning near the river.
Improved cosine similarity measures of simplified neutrosophic sets for medical diagnoses.

PubMed

Ye, Jun

2015-03-01

In pattern recognition and medical diagnosis, similarity measure is an important mathematical tool. To overcome some disadvantages of existing cosine similarity measures of simplified neutrosophic sets (SNSs) in vector space, this paper proposed improved cosine similarity measures of SNSs based on cosine function, including single valued neutrosophic cosine similarity measures and interval neutrosophic cosine similarity measures. Then, weighted cosine similarity measures of SNSs were introduced by taking into account the importance of each element. Further, a medical diagnosis method using the improved cosine similarity measures was proposed to solve medical diagnosis problems with simplified neutrosophic information. The improved cosine similarity measures between SNSs were introduced based on cosine function. Then, we compared the improved cosine similarity measures of SNSs with existing cosine similarity measures of SNSs by numerical examples to demonstrate their effectiveness and rationality for overcoming some shortcomings of existing cosine similarity measures of SNSs in some cases. In the medical diagnosis method, we can find a proper diagnosis by the cosine similarity measures between the symptoms and considered diseases which are represented by SNSs. Then, the medical diagnosis method based on the improved cosine similarity measures was applied to two medical diagnosis problems to show the applications and effectiveness of the proposed method. Two numerical examples all demonstrated that the improved cosine similarity measures of SNSs based on the cosine function can overcome the shortcomings of the existing cosine similarity measures between two vectors in some cases. By two medical diagnoses problems, the medical diagnoses using various similarity measures of SNSs indicated the identical diagnosis results and demonstrated the effectiveness and rationality of the diagnosis method proposed in this paper. The improved cosine measures of SNSs based on cosine function can overcome some drawbacks of existing cosine similarity measures of SNSs in vector space, and then their diagnosis method is very suitable for handling the medical diagnosis problems with simplified neutrosophic information and demonstrates the effectiveness and rationality of medical diagnoses. Copyright © 2014 Elsevier B.V. All rights reserved.
Measurement of the exposure of workers to pesticides*

PubMed Central

Durham, William F.; Wolfe, Homer R.

1962-01-01

There is not a single pesticide for which the interrelationships between occupational exposure by different routes, the fate of the compound in the human body, and its clinical effects are all adequately known. Results of the direct measurement of exposure to pesticides may be used in evaluating the relative hazard of different routes of exposure, different operational procedures, and different protective devices. Results of the indirect measurement of exposure may be of use for the same purpose; in addition, these indirect measures may be used in relating exposures under observed conditions to clinical effects. This paper describes and evaluates detailed procedures for the use of air samples, pads, and washes in the direct measurement of the dermal and respiratory exposure of workers to pesticides. Good methods are not available for measuring oral exposure. Any measure of the absorption, storage, physiological effect, or excretion of a compound constitutes an indirect indication of exposure to it. ImagesFIG. 2 PMID:13888659
Integration of Virtual Machine Technologies into Hastily Formed Networks in Support of Humanitarian Relief and Disaster Recovery Missions

DTIC Science & Technology

2011-12-01

and measures of effectiveness (MOE). New technologies that offer solid-state hard drives built into modular VDI devices known as appliances ...Joint Reconfigurable Vehicle LAN Local Area Network LOS Line of Sight LTE Long Term Evolution MB Megabyte MOP Measure of Performance MOE Measure ...re-usable measures of performance and measures of effectiveness (MOP and MOE) and evaluation procedures will be applied to this research. A
FMCSA safety program effectiveness measurement : carrier intervention effectiveness model, version 1.0 : [analysis brief].

DOT National Transportation Integrated Search

2015-01-01

The Carrier Intervention Effectiveness Model (CIEM) : provides the Federal Motor Carrier Safety : Administration (FMCSA) with a tool for measuring : the safety benefits of carrier interventions conducted : under the Compliance, Safety, Accountability...
Effect Size as the Essential Statistic in Developing Methods for mTBI Diagnosis.

PubMed

Gibson, Douglas Brandt

2015-01-01

The descriptive statistic known as "effect size" measures the distinguishability of two sets of data. Distingishability is at the core of diagnosis. This article is intended to point out the importance of effect size in the development of effective diagnostics for mild traumatic brain injury and to point out the applicability of the effect size statistic in comparing diagnostic efficiency across the main proposed TBI diagnostic methods: psychological, physiological, biochemical, and radiologic. Comparing diagnostic approaches is difficult because different researcher in different fields have different approaches to measuring efficacy. Converting diverse measures to effect sizes, as is done in meta-analysis, is a relatively easy way to make studies comparable.
An "assemblage toxicity index" to improve characterization of effects of atrazine on aquatic plant communities

EPA Science Inventory

Aquatic risk assessments are made uncertain by the use of measures of effect for only one level of effect and by the use of only one percentile in sensitivity distributions for the variation of this measure of effect across an assemblage of taxa. This leaves undefined the severi...

Access to Effective Teaching for Disadvantaged Students: Executive Summary. NCEE 2014-4002

ERIC Educational Resources Information Center

Isenberg, Eric; Max, Jeffrey; Gleason, Philip; Potamites, Liz; Santillano, Robert; Hock, Heinrich; Hansen, Michael

2013-01-01

This report describes disadvantaged students' access to effective teaching in grades 4 through 8 in 29 diverse school districts, using value-added analysis to measure effective teaching. Recent federal initiatives emphasize measuring teacher effectiveness and ensuring that disadvantaged students have equal access to effective teachers. These…
Standardized Effect Size Measures for Mediation Analysis in Cluster-Randomized Trials

ERIC Educational Resources Information Center

Stapleton, Laura M.; Pituch, Keenan A.; Dion, Eric

2015-01-01

This article presents 3 standardized effect size measures to use when sharing results of an analysis of mediation of treatment effects for cluster-randomized trials. The authors discuss 3 examples of mediation analysis (upper-level mediation, cross-level mediation, and cross-level mediation with a contextual effect) with demonstration of the…
The Impact of Partial Measurement Invariance on Testing Moderation for Single and Multi-Level Data

PubMed Central

Hsiao, Yu-Yu; Lai, Mark H. C.

2018-01-01

Moderation effect is a commonly used concept in the field of social and behavioral science. Several studies regarding the implication of moderation effects have been done; however, little is known about how partial measurement invariance influences the properties of tests for moderation effects when categorical moderators were used. Additionally, whether the impact is the same across single and multilevel data is still unknown. Hence, the purpose of the present study is twofold: (a) To investigate the performance of the moderation test in single-level studies when measurement invariance does not hold; (b) To examine whether unique features of multilevel data, such as intraclass correlation (ICC) and number of clusters, influence the effect of measurement non-invariance on the performance of tests for moderation. Simulation results indicated that falsely assuming measurement invariance lead to biased estimates, inflated Type I error rates, and more gain or more loss in power (depends on simulation conditions) for the test of moderation effects. Such patterns were more salient as sample size and the number of non-invariant items increase for both single- and multi-level data. With multilevel data, the cluster size seemed to have a larger impact than the number of clusters when falsely assuming measurement invariance in the moderation estimation. ICC was trivially related to the moderation estimates. Overall, when testing moderation effects with categorical moderators, employing a model that accounts for the measurement (non)invariance structure of the predictor and/or the outcome is recommended. PMID:29867692
The Impact of Partial Measurement Invariance on Testing Moderation for Single and Multi-Level Data.

PubMed

Hsiao, Yu-Yu; Lai, Mark H C

2018-01-01

Moderation effect is a commonly used concept in the field of social and behavioral science. Several studies regarding the implication of moderation effects have been done; however, little is known about how partial measurement invariance influences the properties of tests for moderation effects when categorical moderators were used. Additionally, whether the impact is the same across single and multilevel data is still unknown. Hence, the purpose of the present study is twofold: (a) To investigate the performance of the moderation test in single-level studies when measurement invariance does not hold; (b) To examine whether unique features of multilevel data, such as intraclass correlation (ICC) and number of clusters, influence the effect of measurement non-invariance on the performance of tests for moderation. Simulation results indicated that falsely assuming measurement invariance lead to biased estimates, inflated Type I error rates, and more gain or more loss in power (depends on simulation conditions) for the test of moderation effects. Such patterns were more salient as sample size and the number of non-invariant items increase for both single- and multi-level data. With multilevel data, the cluster size seemed to have a larger impact than the number of clusters when falsely assuming measurement invariance in the moderation estimation. ICC was trivially related to the moderation estimates. Overall, when testing moderation effects with categorical moderators, employing a model that accounts for the measurement (non)invariance structure of the predictor and/or the outcome is recommended.
Measuring effectiveness of a university by a parallel network DEA model

NASA Astrophysics Data System (ADS)

Kashim, Rosmaini; Kasim, Maznah Mat; Rahman, Rosshairy Abd

2017-11-01

Universities contribute significantly to the development of human capital and socio-economic improvement of a country. Due to that, Malaysian universities carried out various initiatives to improve their performance. Most studies have used the Data Envelopment Analysis (DEA) model to measure efficiency rather than effectiveness, even though, the measurement of effectiveness is important to realize how effective a university in achieving its ultimate goals. A university system has two major functions, namely teaching and research and every function has different resources based on its emphasis. Therefore, a university is actually structured as a parallel production system with its overall effectiveness is the aggregated effectiveness of teaching and research. Hence, this paper is proposing a parallel network DEA model to measure the effectiveness of a university. This model includes internal operations of both teaching and research functions into account in computing the effectiveness of a university system. In literature, the graduate and the number of program offered are defined as the outputs, then, the employed graduates and the numbers of programs accredited from professional bodies are considered as the outcomes for measuring the teaching effectiveness. Amount of grants is regarded as the output of research, while the different quality of publications considered as the outcomes of research. A system is considered effective if only all functions are effective. This model has been tested using a hypothetical set of data consisting of 14 faculties at a public university in Malaysia. The results show that none of the faculties is relatively effective for the overall performance. Three faculties are effective in teaching and two faculties are effective in research. The potential applications of the parallel network DEA model allow the top management of a university to identify weaknesses in any functions in their universities and take rational steps for improvement.
Effective UV radiation from model calculations and measurements

NASA Technical Reports Server (NTRS)

Feister, Uwe; Grewe, Rolf

1994-01-01

Model calculations have been made to simulate the effect of atmospheric ozone and geographical as well as meteorological parameters on solar UV radiation reaching the ground. Total ozone values as measured by Dobson spectrophotometer and Brewer spectrometer as well as turbidity were used as input to the model calculation. The performance of the model was tested by spectroradiometric measurements of solar global UV radiation at Potsdam. There are small differences that can be explained by the uncertainty of the measurements, by the uncertainty of input data to the model and by the uncertainty of the radiative transfer algorithms of the model itself. Some effects of solar radiation to the biosphere and to air chemistry are discussed. Model calculations and spectroradiometric measurements can be used to study variations of the effective radiation in space in space time. The comparability of action spectra and their uncertainties are also addressed.
Effects of progressive relaxation and classical music on measurements of attention, relaxation, and stress responses.

PubMed

Scheufele, P M

2000-04-01

The present experiment examined relaxation using different experimental conditions to test whether the effects of individual elements of relaxation could be measured, whether specific effects were revealed, or whether relaxation resulted from a generalized "relaxation response." Sixty-seven normal, male volunteers were exposed to a stress manipulation and then to one of two relaxation (Progressive Relaxation, Music) or control (Attention Control, Silence) conditions. Measurements of attention, relaxation, and stress responses were obtained during each phase of the experiment. All four groups exhibited similar performance on behavioral measures of attention that suggested a reduction in physiological arousal following their relaxation or control condition, as well as a decreased heart rate. Progressive Relaxation, however, resulted in the greatest effects on behavioral and self-report measures of relaxation, suggesting that cognitive cues provided by stress management techniques contribute to relaxation.
Inter-Method Reliability of School Effectiveness Measures: A Comparison of Value-Added and Regression Discontinuity Estimates

ERIC Educational Resources Information Center

Perry, Thomas

2017-01-01

Value-added (VA) measures are currently the predominant approach used to compare the effectiveness of schools. Recent educational effectiveness research, however, has developed alternative approaches including the regression discontinuity (RD) design, which also allows estimation of absolute school effects. Initial research suggests RD is a viable…
Direct Measurement of Pyroelectric and Electrocaloric Effects in Thin Films

NASA Astrophysics Data System (ADS)

Pandya, Shishir; Wilbur, Joshua D.; Bhatia, Bikram; Damodaran, Anoop R.; Monachon, Christian; Dasgupta, Arvind; King, William P.; Dames, Chris; Martin, Lane W.

2017-03-01

An understanding of polarization-heat interactions in pyroelectric and electrocaloric thin-film materials requires that the electrothermal response is reliably characterized. While most work, particularly in electrocalorics, has relied on indirect measurement protocols, here we report a direct technique for measuring both pyroelectric and electrocaloric effects in epitaxial ferroelectric thin films. We demonstrate an electrothermal test platform where localized high-frequency (approximately 1 kHz) periodic heating and highly sensitive thin-film resistance thermometry allow the direct measurement of pyrocurrents (<10 pA ) and electrocaloric temperature changes (<2 mK ) using the "2-omega" and an adapted "3-omega" technique, respectively. Frequency-domain, phase-sensitive detection permits the extraction of the pyrocurrent from the total current, which is often convoluted by thermally-stimulated currents. The wide-frequency-range measurements employed in this study further show the effect of secondary contributions to pyroelectricity due to the mechanical constraints of the substrate. Similarly, measurement of the electrocaloric effect on the same device in the frequency domain (at approximately 100 kHz) allows for the decoupling of Joule heating from the electrocaloric effect. Using one-dimensional, analytical heat-transport models, the transient temperature profile of the heterostructure is characterized to extract pyroelectric and electrocaloric coefficients.
Dynamic properties of hot-wire anemometric measurement circuits in the aspect of measurements in mine conditions / Właściwości dynamiczne termoanemometrycznych układów pomiarowych w aspekcie pomiarów w warunkach kopalnianych

NASA Astrophysics Data System (ADS)

Jamróz, Paweł; Ligęza, Paweł; Socha, Katarzyna

2012-12-01

The use of measurement apparatus under conditions which differ significantly from those under which the apparatus was adjusted carries the risk of altering the previously determined measurement characteristics. This is of special concern in the case of apparatus which is sensitive to external measurement conditions. Advanced measurement systems are equipped with algorithms which allow the negative effect of unstable environmental conditions on their static characteristics to be compensated for. Meanwhile, the problem of altered dynamic properties of such systems is often neglected. This paper presents a model study in which the effect of variable operational conditions on dynamic response of hot-wire anemometric measurement system in the case of simulated mine flows was investigated. A mathematical model of measurement system able to compensate the negative effect of changes in flow velocity and configuration of measurement apparatus itself on its dynamic properties was developed and investigated. Based on conducted experiments, we have developed an automatic regulation algorithm enabling the transmission band of measurement apparatus to be optimized for measurement conditions prevailing in mine environment.
Theoretical and numerical evaluation of polarimeter using counter-circularly-polarized-probing-laser under the coupling between Faraday and Cotton-Mouton effect.

PubMed

Imazawa, Ryota; Kawano, Yasunori; Itami, Kiyoshi

2016-04-01

This study evaluated an effect of an coupling between the Faraday and Cotton-Mouton effect to a measurement signal of the Dodel-Kunz method which uses counter-circular-polarized probing-laser for measuring the Faraday effect. When the coupling is small (the Faraday effect is dominant and the characteristic eigenmodes are approximately circularly polarized), the measurement signal can be algebraically expressed and it is shown that the finite effect of the coupling is still significant. When the Faraday effect is not dominant, a numerical calculation is necessary. The numerical calculation under an ITER-like condition (Bt = 5.3 T, Ip = 15 MA, a = 2 m, ne = 10(20) m(-3) and λ = 119 μm) showed that difference between the pure Faraday rotation and the measurement signal of the Dodel-Kunz method was an order of one degree, which exceeds allowable error of ITER poloidal polarimeter. In conclusion, similar to other polarimeter techniques, the Dodel-Kunz method is not free from the coupling between the Faraday and Cotton-Mouton effect.
FMCSA safety program effectiveness measurement : carrier intervention effectiveness Model, version 1.1, analysis brief.

DOT National Transportation Integrated Search

2016-11-01

The Carrier Intervention Effectiveness Model (CIEM) provides the Federal Motor Carrier Safety Administration (FMCSA) with a tool for measuring the safety benefits of carrier interventions conducted under the Compliance, Safety, Accountability (CSA) e...
FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model, fiscal year 2010.

DOT National Transportation Integrated Search

2014-11-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center, has developed an analytic model to measure the effectiveness of roadside inspections and traffic enforcements in te...
IMPROVING MEASURES OF BIOLOGIC EFFECT: MEASURING EFFECTS IN HUMAN MALES

EPA Science Inventory

Animal toxicology studies have demonstrated spermatogenesis and sperm quality effects after exposure to several drinking water disinfection byproducts (DBPs), including DCA, BDCM, chloral hydrate and DBA. Population-based field studies to identify human male reproductive risks o...
FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model, fiscal year 2012.

DOT National Transportation Integrated Search

2016-02-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National : Transportation Systems Center, has developed an analytic model to measure the effectiveness of roadside : inspections and traffic enforcements i...
FMCSA safety program effectiveness measurement : roadside intervention effectiveness model, fiscal year 2013.

DOT National Transportation Integrated Search

2017-08-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center, has developed an analytic model to measure the effectiveness of roadside inspections and traffic enforcements in te...
FMCSA safety program effectiveness measurement : roadside intervention effectiveness model fiscal year 2011.

DOT National Transportation Integrated Search

2015-06-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center, has developed an analytic model to measure the effectiveness of roadside inspections and traffic enforcements in te...
Irrational beliefs, optimism, pessimism, and psychological distress: a preliminary examination of differential effects in a college population.

PubMed

Chang, E C; Bridewell, W B

1998-02-01

The present study compared the effects of irrational beliefs measured by the Survey of Personal Beliefs (SPB) and optimism and pessimism as measured by the revised Life Orientation Test (LOT-R) on depressive and anxious symptoms 6 weeks later. Results of analysis of variances for both measures of psychological distress indicated a significant main effect for pessimism only. Implications for Ellis Rational Emotive Therapy are discussed.
An Information Transmission Measure for the Analysis of Effective Connectivity among Cortical Neurons

PubMed Central

Law, Andrew J.; Sharma, Gaurav; Schieber, Marc H.

2014-01-01

We present a methodology for detecting effective connections between simultaneously recorded neurons using an information transmission measure to identify the presence and direction of information flow from one neuron to another. Using simulated and experimentally-measured data, we evaluate the performance of our proposed method and compare it to the traditional transfer entropy approach. In simulations, our measure of information transmission outperforms transfer entropy in identifying the effective connectivity structure of a neuron ensemble. For experimentally recorded data, where ground truth is unavailable, the proposed method also yields a more plausible connectivity structure than transfer entropy. PMID:21096617
Estimation of effective wind speed

NASA Astrophysics Data System (ADS)

Østergaard, K. Z.; Brath, P.; Stoustrup, J.

2007-07-01

The wind speed has a huge impact on the dynamic response of wind turbine. Because of this, many control algorithms use a measure of the wind speed to increase performance, e.g. by gain scheduling and feed forward. Unfortunately, no accurate measurement of the effective wind speed is online available from direct measurements, which means that it must be estimated in order to make such control methods applicable in practice. In this paper a new method is presented for the estimation of the effective wind speed. First, the rotor speed and aerodynamic torque are estimated by a combined state and input observer. These two variables combined with the measured pitch angle is then used to calculate the effective wind speed by an inversion of a static aerodynamic model.

FMCSA safety program effectiveness measurement : Carrier Intervention Effectiveness Model, Version 1.1, technical report.

DOT National Transportation Integrated Search

2017-04-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center (Volpe), has developed a quantitative model to measure the effectiveness of motor carrier interventions in terms of ...
IMPROVING MEASURES OF BIOLOGIC EFFECT: MEASURING EFFECTS IN HUMAN MALES.

EPA Science Inventory

Animal toxicology studies have demonstrated spermatogenesis and sperm quality effects after exposure to DCA, BDCM, chloral hydrate and DBA. Population-based field studies to identify human male reproductive risks of DBPs require preliminary work to develop specific epidemiologi...
Experimental investigation on the coupled effect of effective stress and gas slippage on the permeability of shale

PubMed Central

Yang, Diansen; Wang, Wei; Chen, Weizhong; Wang, Shugang; Wang, Xiaoqiong

2017-01-01

Permeability is one of the most important parameters to evaluate gas production in shale reservoirs. Because shale permeability is extremely low, gas is often used in the laboratory to measure permeability. However, the measured apparent gas permeability is higher than the intrinsic permeability due to the gas slippage effect, which could be even more dominant for materials with nanopores. Increasing gas pressure during tests reduces gas slippage effect, but it also decreases the effective stress which in turn influences the permeability. The coupled effect of gas slippage and effective stress on shale permeability remains unclear. Here we perform laboratory experiments on Longmaxi shale specimens to explore the coupled effect. We use the pressure transient method to measure permeability under different stress and pressure conditions. Our results reveal that the apparent measured permeability is controlled by these two competing effects. With increasing gas pressure, there exists a pressure threshold at which the dominant effect on permeability switches from gas slippage to effective stress. Based on the Klinkenberg model, we propose a new conceptual model that incorporates both competing effects. Combining microstructure analysis, we further discuss the roles of stress, gas pressure and water contents on gas permeability of shale. PMID:28304395
Flexible Magnets Are Not Effective in Decreasing Pain Perception and Recovery Time After Muscle Microinjury

PubMed Central

Borsa, Paul A.; Liggett, Charles L.

1998-01-01

Objective: To assess the therapeutic effects of flexible magnets on pain perception, intramuscular swelling, range of motion, and muscular strength in individuals with a muscle microinjury. Design and Setting: This experiment was a single-blind, placebo study using a repeated-measures design. Subjects performed an intense exercise protocol to induce a muscle microinjury. After pretreatment measurements were recorded, subjects were randomly assigned to an experimental (magnet), placebo (imitation magnet), or control (no magnet) group. Posttreatment measurements were repeated at 24, 48, and 72 hours. Subjects: Forty-five healthy subjects participated in the study. Measurements: Subjects were measured repeatedly for pain perception, upper arm girth, range of motion, and static force production. Four separate univariate analyses of variances were used to reveal statistically significant mean (±SD) differences between variables over time. Interaction effects were analyzed using Scheffe post hoc analysis. Results: Analysis of variance revealed no statistically significant (P > .05) mean differences between conditions for any dependent pretreatment and posttreatment measurements. No significant interaction effects were demonstrated between conditions and times. Conclusions: No significant therapeutic effects on pain control and muscular dysfunction were observed in subjects wearing flexible magnets. ImagesFig 2.Fig 3. PMID:16558503
Leadership and Learning: A Measurement-Based Approach for Analyzing School Effectiveness and Developing Effective School Leaders. Project Report.

ERIC Educational Resources Information Center

Krug, Samuel E.

Attending to the questions of how school leadership influences learning and achievement and what effective school leaders do, this document describes a measurement-based approach for studying and developing effective school leadership. The document details the conception, refinement, and psychometric properties of the Instructional Leadership…
Impact of beam-beam effects on precision luminosity measurements at the ILC

NASA Astrophysics Data System (ADS)

Rimbault, C.; Bambade, P.; Mönig, K.; Schulte, D.

2007-09-01

In this paper, the impact of beam-beam effects on the precision luminosity measurement at the International Linear Collider is investigated quantitatively for the first time. GUINEA-PIG, a beam-beam interaction simulation tool, is adapted to treat the space charge effects affecting the Bhabha events used in this measurement. The biases due to the resulting changes in kinematics are evaluated for different center-of-mass energies and beam parameters.
What side effects are problematic for patients prescribed antipsychotic medication? The Maudsley Side Effects (MSE) measure for antipsychotic medication.

PubMed

Wykes, T; Evans, J; Paton, C; Barnes, T R E; Taylor, D; Bentall, R; Dalton, B; Ruffell, T; Rose, D; Vitoratou, S

2017-10-01

Capturing service users' perspectives can highlight additional and different concerns to those of clinicians, but there are no up to date, self-report psychometrically sound measures of side effects of antipsychotic medications. Aim To develop a psychometrically sound measure to identify antipsychotic side effects important to service users, the Maudsley Side Effects (MSE) measure. An initial item bank was subjected to a Delphi exercise (n = 9) with psychiatrists and pharmacists, followed by service user focus groups and expert panels (n = 15) to determine item relevance and language. Feasibility and comprehensive psychometric properties were established in two samples (N43 and N50). We investigated whether we could predict the three most important side effects for individuals from their frequency, severity and life impact. MSE is a 53-item measure with good reliability and validity. Poorer mental and physical health, but not psychotic symptoms, was related to side-effect burden. Seventy-nine percent of items were chosen as one of the three most important effects. Severity, impact and distress only predicted 'putting on weight' which was more distressing, more severe and had more life impact in those for whom it was most important. MSE is a self-report questionnaire that identifies reliably the side-effect burden as experienced by patients. Identifying key side effects important to patients can act as a starting point for joint decision making on the type and the dose of medication.
Implementing Value-Added Measures of School Effectiveness: Getting the Incentives Right.

ERIC Educational Resources Information Center

Ladd, Helen F.; Walsh, Randall P.

2002-01-01

Evaluates value-added approach to measuring school effectiveness in North and South Carolina. Finds that value-added approach favors high-achievement schools, with large percentage of students from high-SES backgrounds. Discusses statistical problems in measuring value added. Concludes teachers' and administrators' avoidance of low-achievement,…
12 CFR 702.101 - Measures and effective date of net worth classification.

Code of Federal Regulations, 2011 CFR

2011-01-01

... classification. 702.101 Section 702.101 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS PROMPT CORRECTIVE ACTION Net Worth Classification § 702.101 Measures and effective date of net worth classification. (a) Net worth measures. For purposes of this part, a credit union...
12 CFR 702.101 - Measures and effective date of net worth classification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... classification. 702.101 Section 702.101 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS PROMPT CORRECTIVE ACTION Net Worth Classification § 702.101 Measures and effective date of net worth classification. (a) Net worth measures. For purposes of this part, a credit union...
76 FR 82197 - Fisheries of the Northeastern United States; Northeast Multispecies Fishery; Recreational...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... the recreational fishing begins to not only increase the effectiveness of such measures at achieving... implementation may undermine compliance with such measures and reduce the effectiveness of the AMs and their...; Recreational Accountability Measures AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and...
Measuring quantum effects in photosynthetic light-harvesting complexes with multipartite entanglement

NASA Astrophysics Data System (ADS)

Smyth, Cathal

This thesis is a compilation of studies on delocalization measures, entanglement, and the role of quantum coherence in electronic energy transfer (EET) in light-harvesting complexes. The first two chapters after the introduction provide foundational knowledge of quantum information and light-harvesting, respectively. Chapter 2 introduces concepts from quantum information such as purity, bipartite entanglement and criteria for its measurement. The peripheral light-harvesting complex LH2, isolated from the anoxygenic purple bacterium Rhodopseudomonas acidophila, is employed as model system of interest. This light-harvesting complex, along with a description of the process of light-harvesting, the presence of quantum coherence, and the different models used to simulate EET, are described in chapter 3. In combination these two chapters lay the foundation for chapter 4, a critical assessment of the current measures of delocalization employed in EET studies, their relationship, and overall effectiveness. The conclusion is that entanglement based measures are most effective at measuring quantum effects, and that they can be related to more conventional delocalization measures such as the inverse participation ratio (IPR) by taking into account the entropy of the system under study. All the measures within this chapter are known as bipartite measures, and only measure the strength of correlation between two sites. The fifth chapter presents the core of this thesis. Following a brief introduction to the concept of multipartite entanglement, the development of multipartite delocalization measures that give high-resolution information on quantum coherence in light-harvesting complexes is detailed. In contrast to other measures, these analytical measures can detect many body correlations in large systems undergoing decoherence. We determine that, much like the bipartite entanglement based measures of chapter 4, these measures are also a function of system entropy, and have a similar hierarchial structure as that of multipartite entanglement measures. The final chapter applies these measures to our model LH2 complex, and draws conclusions on the role of bipartite delocalization and multipartite delocalization in EET.
Seeing the light: the effects of particles, dissolved materials, and temperature on in situ measurements of DOM fluorescence in rivers and streams

USGS Publications Warehouse

Downing, Bryan D.; Pellerin, Brian A.; Bergamaschi, Brian A.; Saraceno, John Franco; Kraus, Tamara E.C.

2012-01-01

Field-deployable sensors designed to continuously measure the fluorescence of colored dissolved organic matter (FDOM) in situ are of growing interest. However, the ability to make FDOM measurements that are comparable across sites and over time requires a clear understanding of how instrument characteristics and environmental conditions affect the measurements. In particular, the effects of water temperature and light attenuation by both colored dissolved material and suspended particles may be significant in settings such as rivers and streams. Using natural standard reference materials, we characterized the performance of four commercially-available FDOM sensors under controlled laboratory conditions over ranges of temperature, dissolved organic matter (DOM) concentrations, and turbidity that spanned typical environmental ranges. We also examined field data from several major rivers to assess how often attenuation artifacts or temperature effects might be important. We found that raw (uncorrected) FDOM values were strongly affected by the light attenuation that results from dissolved substances and suspended particles as well as by water temperature. Observed effects of light attenuation and temperature agreed well with theory. Our results show that correction of measured FDOM values to account for these effects is necessary and feasible over much of the range of temperature, DOM concentration, and turbidity commonly encountered in surface waters. In most cases, collecting high-quality FDOM measurements that are comparable through time and between sites will require concurrent measurements of temperature and turbidity, and periodic discrete sample collection for laboratory measurement of DOM.
Measuring Exposure Opportunities: Using Exogenous Measures in Assessing Effects of Media Exposure on Smoking Outcomes

PubMed Central

Liu, Jiaying; Hornik, Robert

2016-01-01

Measurement of exposure has long been one of the most central and fundamental issues in communication research. While self-reported measures remain dominant in the field, alternative approaches such as exogenous or hybrid measures have received increasing scholarly attention and been employed in various contexts for the estimation of media exposure; however, systematic scrutiny of such measures is thin. This study aims to address the gap by systematically reviewing the studies which utilized exogenous or hybrid exposure measures for examining the effects of media exposure on tobacco-related outcomes. We then proceed to discuss the strengths and weaknesses, current developments in this class of measurement, drawing some implications for the appropriate utilization of exogenous and hybrid measures. PMID:27746848
Effectiveness of the Civil Aviation Security Program.

DTIC Science & Technology

1979-04-25

the airline and airport security measures in effect. Moreover, of the 25 U.S. airline hijackings that occurred over this 6-year period, none was caused...Furthermore, it is estimated that 75 hijackings or related crimes may have been prevented by the airline and airport security measures in effect...system. Moreover, it is estimated that at least 75 hijackings or related crimes may have been prevented by U.S. airline and airport security measures
Sensitivity of equilibrium profile reconstruction to motional Stark effect measurements

NASA Astrophysics Data System (ADS)

Batha, S. H.; Levinton, F. M.; Hirshman, S. P.; Bell, M. G.; Wieland, R. M.

1996-09-01

The magnetic-field pitch-angle profile, gamma p(R) identical to tan-1(Bpol/Btor), is measured on TFTR using a motional Stark effect (MSE) polarimeter. Measured pitch angle profiles, along with kinetic profiles and external magnetic measurements, are used to compute a self-consistent equilibrium using the free-boundary variational moments equilibrium code VMEC. Uncertainties in the q profile due to uncertainties in gamma P(R), magnetic measurements and kinetic measurements are found to be small. Subsequent uncertainties in the VMEC-calculated current density and shear profiles are also small
The effectiveness of lifestyle triple P in the Netherlands: a randomized controlled trial.

PubMed

Gerards, Sanne M P L; Dagnelie, Pieter C; Gubbels, Jessica S; van Buuren, Stef; Hamers, Femke J M; Jansen, Maria W J; van der Goot, Odilia H M; de Vries, Nanne K; Sanders, Matthew R; Kremers, Stef P J

2015-01-01

Lifestyle Triple P is a general parenting intervention which focuses on preventing further excessive weight gain in overweight and obese children. The objective of the current study was to assess the effectiveness of the Lifestyle Triple P intervention in the Netherlands. We used a parallel randomized controlled design to test the effectiveness of the intervention. In total, 86 child-parent triads (children 4-8 years old, overweight or obese) were recruited and randomly assigned (allocation ratio 1:1) to the Lifestyle Triple P intervention or the control condition. Parents in the intervention condition received a 14-week intervention consisting of ten 90-minute group sessions and four individual telephone sessions. Primary outcome measure was the children's body composition (BMI z-scores, waist circumference and skinfolds). The research assistant who performed the measurements was blinded for group assignment. Secondary outcome measures were the children's dietary behavior and physical activity level, parenting practices, parental feeding style, parenting style, and parental self-efficacy. Outcome measures were assessed at baseline and 4 months (short-term) and 12 months (long-term) after baseline. Multilevel multiple regression analyses were conducted to determine the effect of the intervention on primary and secondary outcome measures. No intervention effects were found on children's body composition. Analyses of secondary outcomes showed positive short-term intervention effects on children's soft-drink consumption and parental responsibility regarding physical activity, encouragement to eat, psychological control, and efficacy and satisfaction with parenting. Longer-term intervention effects were found on parent's report of children's time spent on sedentary behavior and playing outside, parental monitoring food intake, and responsibility regarding nutrition. Although the Lifestyle Triple P intervention showed positive effects on some parent reported child behaviors and parenting measures, no effects were visible on children's body composition or objectively measured physical activity. Several adjustments of the intervention content are recommended, for example including a booster session. Nederlands Trial Register NTR 2555.
Psychopathy Factor Interactions and Co-Occurring Psychopathology: Does Measurement Approach Matter?

PubMed Central

Hunt, Elizabeth; Bornovalova, Marina A.; Kimonis, Eva R.; Lilienfeld, Scott O.; Poythress, Norman G.

2014-01-01

The two dimensions of psychopathy as operationalized by various measurement tools show differential associations with psychopathology; however, evidence suggests that the statistical interaction of Factor 1 (F1) and Factor 2 (F2) may be important in understanding associations with psychopathology. Findings regarding the interactive effects of F1 and F2 are mixed, as both potentiating and protective effects have emerged. Moreover, approaches to measuring F1 (e.g. clinical interview versus self-report) are based on different conceptualizations of F1, which may influence the interactive effects. The current study aims to 1) elucidate the influence of F1 and F2 on psychopathology by using both variable-centered and person-centered approaches and 2) determine if the measurement of F1 influences the interactive effects of F1 and F2 by comparing the strength of interactive effects across F1 measures in a sample of over 1,500 offenders. Across analytic methods, there were very few cases in which F1 statistically influenced the association between F2 and psychopathology, such that F1 failed to evidence either potentiating or protective effects on F2. Furthermore, the conceptualization of F1 across psychopathy measures did not impact the interactive effects of F1 and F2. These findings suggest that F2 is probably driving the relations between psychopathy and other forms of psychopathology, and that F1 may play less of a role in interacting with F2 than previously believed. PMID:25580612
Measurement and Calibration of PSD with Phase-shifting Interferometers

NASA Technical Reports Server (NTRS)

Lehan, J. P.

2008-01-01

We discuss the instrumental aspects affecting the measurement accuracy when determining PSD with phase shifting interferometers. These include the source coherence, optical train effects, and detector effects. The use of a carefully constructed calibration standard will also be discussed. We will end with a recommended measurement and data handling procedure.
The Chronic and Acute Effects of Exercise Upon Selected Blood Measures.

ERIC Educational Resources Information Center

Roitman, J. L.; Brewer, J. P.

This study investigated the effects of chronic and acute exercise upon selected blood measures and indices. Nine male cross-country runners were studied. Red blood count, hemoglobin, and hematocrit were measured using standard laboratory techniques; mean corpuscular volume (MCV), mean corpuscular hemoglobin, and mean corpuscular hemoglobin…

Noninvasive Quantum Measurement of Arbitrary Operator Order by Engineered Non-Markovian Detectors

NASA Astrophysics Data System (ADS)

Bülte, Johannes; Bednorz, Adam; Bruder, Christoph; Belzig, Wolfgang

2018-04-01

The development of solid-state quantum technologies requires the understanding of quantum measurements in interacting, nonisolated quantum systems. In general, a permanent coupling of detectors to a quantum system leads to memory effects that have to be taken into account in interpreting the measurement results. We analyze a generic setup of two detectors coupled to a quantum system and derive a compact formula in the weak-measurement limit that interpolates between an instantaneous (text-book type) and almost continuous—detector dynamics-dependent—measurement. A quantum memory effect that we term "system-mediated detector-detector interaction" is crucial to observe noncommuting observables simultaneously. Finally, we propose a mesoscopic double-dot detector setup in which the memory effect is tunable and that can be used to explore the transition to non-Markovian quantum measurements experimentally.
Relative risk reduction is useful metric to standardize effect size for public heath interventions for translational research.

PubMed

Mirzazadeh, Ali; Malekinejad, Mohsen; Kahn, James G

2015-03-01

Heterogeneity of effect measures in intervention studies undermines the use of evidence to inform policy. Our objective was to develop a comprehensive algorithm to convert all types of effect measures to one standard metric, relative risk reduction (RRR). This work was conducted to facilitate synthesis of published intervention effects for our epidemic modeling of the health impact of human immunodeficiency virus [HIV testing and counseling (HTC)]. We designed and implemented an algorithm to transform varied effect measures to RRR, representing the proportionate reduction in undesirable outcomes. Our extraction of 55 HTC studies identified 473 effect measures representing unique combinations of intervention-outcome-population characteristics, using five outcome metrics: pre-post proportion (70.6%), odds ratio (14.0%), mean difference (10.2%), risk ratio (4.4%), and RRR (0.9%). Outcomes were expressed as both desirable (29.5%, eg, consistent condom use) and undesirable (70.5%, eg, inconsistent condom use). Using four examples, we demonstrate our algorithm for converting varied effect measures to RRR and provide the conceptual basis for advantages of RRR over other metrics. Our review of the literature suggests that RRR, an easily understood and useful metric to convey risk reduction associated with an intervention, is underused by original and review studies. Copyright © 2015 Elsevier Inc. All rights reserved.
Perspectives on repeated low-level blast and the measurement of neurotrauma in humans as an occupational exposure risk

NASA Astrophysics Data System (ADS)

Carr, W.; Dell, K. C.; Yanagi, M. A.; Hassan, D. M.; LoPresti, M. L.

2017-11-01

A pressing question in military medical research is the nature and degree of effects on the human brain from occupational repeated exposure to low-level explosive blast, but reliable and effective means to objectively measure such effects remain elusive. In survey results, headache, difficulty sleeping, irritability, cognitive impairment, and a variety of other symptoms consistent with post-concussive syndrome have been reported by those exposed to blast and there was positive correlation between degree of blast exposure and degree of symptomology, but an important goal is to obtain more objective evidence of an effect than self-report alone. This review reflects recent efforts to measure and evaluate such hypothesized effects and current recommendations for ongoing study. Optimal measures are likely those with sensitivity and specificity to systemic effects in mild neurotrauma, that have minimal to no volitional component, and that can be sampled relatively quickly with minimal intrusion in prospective, observational field studies during routine training with explosives. An understanding of an association between parameters of exposure to repeated low-level blast and negative neurologic effects would support the evaluation of clinical implications and development of protective equipment and surveillance protocols where warranted. At present, low-level blast exposure surveillance measurements do not exist as a systematic record for any professional community.
Influenza outbreak control practices and the effectiveness of interventions in long-term care facilities: a systematic review.

PubMed

Rainwater-Lovett, Kaitlin; Chun, Kevin; Lessler, Justin

2014-01-01

Evaluation of influenza control measures frequently focuses on the efficacy of chemoprophylaxis and vaccination, while the effectiveness of non-pharmaceutical interventions (NPI) receives less emphasis. While influenza control measures are frequently reported for individual outbreaks, there have been few efforts to characterize the real-world effectiveness of these interventions across outbreaks. To characterize influenza case and outbreak definitions and control measures reported by long-term care facilities (LTCFs) of elderly adults and estimate the reduction in influenza-like illness (ILI) attack rates due to chemoprophylaxis and NPI. We conducted a literature search in PubMed including English-language studies reporting influenza outbreaks among elderly individuals in LTCFs. A Bayesian hierarchical logistic regression model estimated the effects of control measures on ILI attack rates. Of 654 articles identified in the literature review, 37 articles describing 60 influenza outbreaks met the inclusion criteria. Individuals in facilities where chemoprophylaxis was used were significantly less likely to develop influenza A or B than those in facilities with no interventions [odds ratio (OR) 0·48, 95% CI: 0·28, 0·84]. Considered by drug class, adamantanes significantly reduced infection risk (OR 0·22, 95% CI: 0·12, 0·42), while neuraminidase inhibitors did not show a significant effect. Although NPI showed no significant effect, the results suggest that personal protective equipment may produce modest protective effects. Our results indicate pharmaceutical control measures have the clearest reported protective effect in LTCFs. Non-pharmaceutical approaches may be useful; however, most data were from observational studies and standardized reporting or well-conducted clinical trials of NPI are needed to more precisely measure these effects. © 2013 The Authors. Influenza and Other Respiratory Viruses Published by John Wiley & Sons Ltd.
Development of instrumentation for differential spectroscopic measurements at millimeter wavelengths

NASA Astrophysics Data System (ADS)

D'Alessandro, G.; de Bernardis, P.; Masi, S.; Schillaci, A.

2016-07-01

The study of the spectral-spatial anisotropy of the high-latitude mm-wave sky is a powerful tool of cosmology. It can be used to provide deep insight in the Sunyaev-Zeldovich (SZ) effect, the Cosmic Infrared Background, the anisotropy of the CMB, using the spectral dimension to provide substantially increased information with respect to what is achievable by means of standard multiband photometry. Here we focus on spectral measurements of the SZ effect. Large mm-wave telescopes are now routinely mapping photometrically the SZ effect in a number of clusters, estimating the comptonisation parameter and using them as cosmological probes. Low-resolution spectroscopic measurements of the SZ effect would be very effective in removing the degeneracy between parameters inevitable in photometric measurements. We describe a real-world implementation of this measurement strategy, based on an imaging, efficient, differential Fourier transform spectrometer (FTS). The instrument is based on a Martin-Puplett interferometer (MPI) configuration. We combined two MPIs working synchronously to use the entire input power. In our implementation the observed sky field is divided into two halves along the meridian. Each half-field corresponds to one of the two input ports of the MPI. Each detector in the FTS focal planes measures the difference in brightness between two sky pixels, symmetrically located with respect to the meridian. Exploiting the high common mode rejection of the MPI, tiny sky brightness gradients embedded in an overwhelming isotropic background might be measured. We investigate experimentally the common-mode rejection achievable in the MPI at mm wavelengths, and discuss the use of such an instrument to measure the spectrum of cosmic microwave background (CMB) anisotropy and the SZ effect.
Toward spanning the quality chasm: an examination of team functioning measures.

PubMed

Strasser, Dale C; Burridge, Andrea Backscheider; Falconer, Judith A; Uomoto, Jay M; Herrin, Jeph

2014-11-01

To examine the effect of 5 measures of team functioning on patient outcomes. Observational, exploratory, measurement. Team functioning surveys and patient outcomes collected 1 year apart in a clinical trial were analyzed. The findings are discussed in context of the domains of team functioning, team effectiveness, and quality improvement. 27 Veterans Affairs medical centers. Staff (t1: N=356; t2: N=273) on inpatient teams and patients (t1: N=4266; t2: N=3213) treated by the teams. Not applicable. Five measures of team functioning (Physician Engagement, Shared Leadership, Supervisor Team Support, Teamness, and Team Effectiveness scales) and 3 measures of patient outcomes (functional improvement, discharge destination, and length of stay) were assessed at 2 time points with hierarchical generalized linear models to evaluate the association between team functioning measures and changes in patient outcomes. Associations (P<.05) between team functioning measures and patient outcomes were found for 3 of the 15 analyses over the study period. Higher Physician Engagement scale score was associated with lower length of stay (P=.017), and increased scores on Teamness and Team Effectiveness scales correlated with higher rates of community discharge (P=.044 and .049, respectively). This exploratory analysis revealed trends that team functioning corresponds with patient outcomes in clinically relevant patterns. An increase in community discharge and a decrease in length of stay were associated with higher scores of team functioning. Here, we find evidence that modifiable attributes of team functioning have a measurable effect on patient outcomes. Such findings are promising and support the need for further research on team effectiveness. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.
MOE vs. M&E: considering the difference between measuring strategic effectiveness and monitoring tactical evaluation.

PubMed

Diehl, Glen; Major, Solomon

2015-01-01

Measuring the effectiveness of military Global Health Engagements (GHEs) has become an area of increasing interest to the military medical field. As a result, there have been efforts to more logically and rigorously evaluate GHE projects and programs; many of these have been based on the Logic and Results Frameworks. However, while these Frameworks are apt and appropriate planning tools, they are not ideally suited to measuring programs' effectiveness. This article introduces military medicine professionals to the Measures of Effectiveness for Defense Engagement and Learning (MODEL) program, which implements a new method of assessment, one that seeks to rigorously use Measures of Effectiveness (vs. Measures of Performance) to gauge programs' and projects' success and fidelity to Theater Campaign goals. While the MODEL method draws on the Logic and Results Frameworks where appropriate, it goes beyond their planning focus by using the latest social scientific and econometric evaluation methodologies to link on-the-ground GHE "lines of effort" to the realization of national and strategic goals and end-states. It is hoped these methods will find use beyond the MODEL project itself, and will catalyze a new body of rigorous, empirically based work, which measures the effectiveness of a broad spectrum of GHE and security cooperation activities. We based our strategies on the principle that it is much more cost-effective to prevent conflicts than it is to stop one once it's started. I cannot overstate the importance of our theater security cooperation programs as the centerpiece to securing our Homeland from the irregular and catastrophic threats of the 21st Century.-GEN James L. Jones, USMC (Ret.). Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.
Effects of alcoholism severity and smoking on executive neurocognitive function.

PubMed

Glass, Jennifer M; Buu, Anne; Adams, Kenneth M; Nigg, Joel T; Puttler, Leon I; Jester, Jennifer M; Zucker, Robert A

2009-01-01

Neurocognitive deficits in chronic alcoholic men are well documented. Impairments include memory, visual-spatial processing, problem solving and executive function. The cause of impairment could include direct effects of alcohol toxicity, pre-existing cognitive deficits that predispose towards substance abuse, comorbid psychiatric disorders and abuse of substances other than alcohol. Cigarette smoking occurs at higher rates in alcoholism and has been linked to poor cognitive performance, yet the effects of smoking on cognitive function in alcoholism are often ignored. We examined whether chronic alcoholism and chronic smoking have effects on executive function. Alcoholism and smoking were examined in a community-recruited sample of alcoholic and non-alcoholic men (n = 240) using standard neuropsychological and reaction-time measures of executive function. Alcoholism was measured as the average level of alcoholism diagnoses across the study duration (12 years). Smoking was measured in pack-years. Both alcoholism and smoking were correlated negatively with a composite executive function score. For component measures, alcoholism was correlated negatively with a broad range of measures, whereas smoking was correlated negatively with measures that emphasize response speed. In regression analyses, both smoking and alcoholism were significant predictors of executive function composite. However, when IQ is included in the regression analyses, alcoholism severity is no longer significant. Both smoking and alcoholism were related to executive function. However, the effect of alcoholism was not independent of IQ, suggesting a generalized effect, perhaps affecting a wide range of cognitive abilities of which executive function is a component. On the other hand, the effect of smoking on measures relying on response speed were independent of IQ, suggesting a more specific processing speed deficit associated with chronic smoking.
Transition State Geometry Measurements from 13C Isotope Effects. The Experimental Transition State for the Epoxidation of Alkenes with Oxaziridines

PubMed Central

Hirschi, Jennifer S.; Takeya, Tetsuya; Hang, Chao; Singleton, Daniel A.

2009-01-01

We suggest here and evaluate a methodology for the measurement of specific interatomic distances from a combination of theoretical calculations and experimentally measured 13C kinetic isotope effects. This process takes advantage of a broad diversity of transition structures available for the epoxidation of 2-methyl-2-butene with oxaziridines. From the isotope effects calculated for these transition structures, a theory-independent relationship between the C-O bond distances of the newly forming bonds and the isotope effects is established. Within the precision of the measurement, this relationship in combination with the experimental isotope effects provides a highly accurate picture of the C-O bonds forming at the transition state. The diversity of transition structures also allows an evaluation of the Schramm process for defining transition state geometries based on calculations at non-stationary points, and the methodology is found to be reasonably accurate. PMID:19146405
Improving qPCR telomere length assays: Controlling for well position effects increases statistical power.

PubMed

Eisenberg, Dan T A; Kuzawa, Christopher W; Hayes, M Geoffrey

2015-01-01

Telomere length (TL) is commonly measured using quantitative PCR (qPCR). Although, easier than the southern blot of terminal restriction fragments (TRF) TL measurement method, one drawback of qPCR is that it introduces greater measurement error and thus reduces the statistical power of analyses. To address a potential source of measurement error, we consider the effect of well position on qPCR TL measurements. qPCR TL data from 3,638 people run on a Bio-Rad iCycler iQ are reanalyzed here. To evaluate measurement validity, correspondence with TRF, age, and between mother and offspring are examined. First, we present evidence for systematic variation in qPCR TL measurements in relation to thermocycler well position. Controlling for these well-position effects consistently improves measurement validity and yields estimated improvements in statistical power equivalent to increasing sample sizes by 16%. We additionally evaluated the linearity of the relationships between telomere and single copy gene control amplicons and between qPCR and TRF measures. We find that, unlike some previous reports, our data exhibit linear relationships. We introduce the standard error in percent, a superior method for quantifying measurement error as compared to the commonly used coefficient of variation. Using this measure, we find that excluding samples with high measurement error does not improve measurement validity in our study. Future studies using block-based thermocyclers should consider well position effects. Since additional information can be gleaned from well position corrections, rerunning analyses of previous results with well position correction could serve as an independent test of the validity of these results. © 2015 Wiley Periodicals, Inc.
Effects of wall temperature on skin-friction measurements by oil-film interferometry

NASA Astrophysics Data System (ADS)

Bottini, H.; Kurita, M.; Iijima, H.; Fukagata, K.

2015-10-01

Wind-tunnel skin-friction measurements with thin-oil-film interferometry have been taken on an aluminum sample to investigate the effects of wall temperature on the accuracy of the technique. The sample has been flush-mounted onto a flat plate with an electric heater at its bottom and mirror-smooth temperature-sensitive paint sprayed on its top. The heater has varied the sample temperature from ambient to 328 K, and the paint has permitted wall temperature measurements on the same area of the skin-friction measurements and during the same test. The measured wall temperatures have been used to calculate the correct oil viscosities, and these viscosities and the constant nominal viscosity at 298 K have been used to calculate two different sets of skin-friction coefficients. These sets have been compared to each other and with theoretical values. This comparison shows that the effects of wall temperature on the accuracy of skin-friction measurements are sensible, and more so as wall temperature differs from 298 K. Nonetheless, they are effectively neutralized by the use of wall temperature measurements in combination with the correct oil viscosity-temperature law. In this regard, the special temperature-sensitive paint developed for this study shows advantages with respect to more traditional wall temperature measurement techniques.
Medical and health economic evaluation of prevention- and control measures related to MRSA infections or -colonisations at hospitals.

PubMed

Korczak, Dieter; Schöffmann, Christine

2010-03-16

Methicillin-resistant Staphylococcus aureus (MRSA) are dangerous agents of nosocomial infections. In 2007 the prevalence of MRSA is 20.3% in Germany (Oxacilline-resistance according to EUCAST-criteria [EUCAST = European Committee on Antimicrobial Susceptibility Testing]). Which measurements are effective in the prevention and control of MRSA-infections in the hospital?How effective are contact precautions, screening, decolonisation, education and surveillance?Which recommendations can be given to health care politics on the basis of cost-effectiveness studies?Have there been any adverse effects on patients and clinical staff?What kind of liability problems exist? Based on a systematic review of the literature studies are included which have been published in German or English language since 2004. 1,508 articles have been found. After having surveyed the full text, 33 medical, eight economic and four ethical/juridical studies are included for the Health Technology Assessment (HTA) report. The key result of the HTA report is that different measurements are effective in the prevention and control of MRSA-infections in hospitals, though the majority of the studies has a low quality. Effective are the conduction of differentiated screening measurements if they take into account the specific endemic situation, the use of antibiotic-control programs and the introduction and control of hygienic measurements. The break even point of preventive and control measurements cannot be defined because the study results differ too much. In the future it has to be more considered that MRSA-infections and contact precautions lead to a psycho-social strain for patients. It is hardly possible to describe causal efficacies because in the majority of the studies confounders are not sufficiently considered. In many cases bundles of measurements have been established but not analyzed individually. The internal and external validity of the studies is too weak to evaluate single interventions. Hygienic measurements prove to be effective in combination with other measurements. But it cannot be said which of the single measurements (gloves, washing hands, wearing gowns or masks) has the strongest effect on the reduction of MRSA. It is irritating that there are high differences in the compliance concerning hand hygiene between different studies. A general decolonisation is questionable for different reasons: first because of the side-effects for patients, second because of the high rate of spontaneous remissions in the untreated control group, third because of the differentiated process from colonisation to infection. Severalfold Hawthorne effects have been reported. One of them is that the competition between hospitals to reduce MRSA-rates leads already to a reduction. It is evident that selective screening programs of risk patients considering the particular MRSA-prevalence are of use. The application of rapid tests seems to be only recommendable for risk patients and a high MRSA-prevalence. The improvement of the compliance of hand hygiene should be the basis of any prevention strategy. Training of staff members (with feedback mechanisms) is effective to improve compliance and to optimise the use of antibiotics. Antibiotic management programs are effective as well. Obviously multimodal approaches can lead to overadditive effects. Therefore the catalogue of preventive and control measurements has to be further evaluated. Good cost-efficacy studies are missing in Germany. The psychosocial effects of MRSA-infections are not researched in Germany. There is only punctual information on the risk management of hospitals.
A novel multi-dimensional absolute distance measurement system using a basic frequency modulated continuous wave radar and an external cavity laser with trilateration metrology

NASA Astrophysics Data System (ADS)

Xiong, Xingting; Qu, Xinghua; Zhang, Fumin

2018-01-01

We propose and describe a novel multi-dimensional absolute distance measurement system. This system incorporates a basic frequency modulated continuous wave (FMCW) radar and an second external cavity laser (ECL). Through the use of trilateration, the system in our paper can provide 3D resolution inherently range. However, the measured optical path length differences (OPD) is often variable in industrial environments and this will causes Doppler effect, which has greatly impact on the measurement result. With using the second ECL, the system can correct the Doppler effect to ensure the precision of absolute distance measurement. Result of the simulation will prove the influence of Doppler effect.
Study on the effect of beam propagation through atmospheric turbulence on standoff nanosecond laser induced breakdown spectroscopy measurements.

PubMed

Laserna, J J; Reyes, R Fernández; González, R; Tobaria, L; Lucena, P

2009-06-08

We report on an experimental study of the effect of atmospheric turbulence on laser induced breakdown spectroscopy (LIBS) measurements. The characteristics of the atmosphere dictate specific performance constraints to this technology. Unlike classical laboratory LIBS systems where the distance to the sample is well known and characterized, LIBS systems working at several tens of meters to the target have specific atmospheric propagation conditions that cause the quality of the LIBS signals to be affected to a significant extent. Using a new LIBS based sensor system fitted with a nanosecond laser emitting at 1064 nm, propagation effects at distances of up to 120 m were investigated. The effects observed include wander and scintillation in the outgoing laser beam and in the return atomic emission signal. Plasmas were formed on aluminium targets. Average signal levels and signal fluctuations are measured so the effect of atmospheric turbulence on LIBS measurements is quantified.
Phylogenetic diversity measures based on Hill numbers.

PubMed

Chao, Anne; Chiu, Chun-Huo; Jost, Lou

2010-11-27

We propose a parametric class of phylogenetic diversity (PD) measures that are sensitive to both species abundance and species taxonomic or phylogenetic distances. This work extends the conventional parametric species-neutral approach (based on 'effective number of species' or Hill numbers) to take into account species relatedness, and also generalizes the traditional phylogenetic approach (based on 'total phylogenetic length') to incorporate species abundances. The proposed measure quantifies 'the mean effective number of species' over any time interval of interest, or the 'effective number of maximally distinct lineages' over that time interval. The product of the measure and the interval length quantifies the 'branch diversity' of the phylogenetic tree during that interval. The new measures generalize and unify many existing measures and lead to a natural definition of taxonomic diversity as a special case. The replication principle (or doubling property), an important requirement for species-neutral diversity, is generalized to PD. The widely used Rao's quadratic entropy and the phylogenetic entropy do not satisfy this essential property, but a simple transformation converts each to our measures, which do satisfy the property. The proposed approach is applied to forest data for interpreting the effects of thinning.
Electrodes as social glue: measuring heart rate promotes giving in the trust game.

PubMed

Van Lange, Paul A M; Finkenauer, Catrin; Popma, Arne; van Vugt, Mark

2011-06-01

While physiological measures are increasingly used to help us understand the workings of interpersonal trust (and related behaviors), we know very little about the effects of such measures on trust. We examined the effects of a classic measure, the measurement of heart rate using a standard protocol, on behavioral trust in dyads of women who did not know each other. Behavioral trust was assessed in the trust game, in which the trustor decides how much money from their subject payment to give to a trustee, while knowing that the experimenter triples that amount before giving it to the trustee, after which the trustee decides how much money to return to the trustor. As predicted, we found greater levels of behavioral trust in the trust game, as well as greater returns by the trustees (which were accounted for by trustor's giving), in the heart rate (HR) than in no heart rate (NHR) measurement condition. Parallel findings were observed for self-reported trust. Findings are discussed in terms of the idea that the elusive effects of a protocol for measuring heart rate can cause pronounced effects on subsequent social interactions via enhanced interpersonal trust. 2011 Elsevier B.V. All rights reserved.
The capability of satellite borne remote sensors to measure stratospheric trace constituents. Volume 2: Ozone and aerosol related missions

NASA Technical Reports Server (NTRS)

Keitz, E. L.

1978-01-01

Stratospheric trace constituent measurement requirements are separated into two somewhat overlapping areas. In the first area, it is assumed that the only problem of interest is ozone; its chemistry chain, environmental effects and measurement requirements. In like manner, in the second area it is assumed that the only problem of interest is stratospheric aerosols; their chemistry, effects and measurement requirements.
Effects of tropospheric and ionospheric refraction errors in the utilization of GEOS-C altimeter data

NASA Technical Reports Server (NTRS)

Goad, C. C.

1977-01-01

The effects of tropospheric and ionospheric refraction errors are analyzed for the GEOS-C altimeter project in terms of their resultant effects on C-band orbits and the altimeter measurement itself. Operational procedures using surface meteorological measurements at ground stations and monthly means for ocean surface conditions are assumed, with no corrections made for ionospheric effects. Effects on the orbit height due to tropospheric errors are approximately 15 cm for single pass short arcs (such as for calibration) and 10 cm for global orbits of one revolution. Orbit height errors due to neglect of the ionosphere have an amplitude of approximately 40 cm when the orbits are determined from C-band range data with predominantly daylight tracking. Altimeter measurement errors are approximately 10 cm due to residual tropospheric refraction correction errors. Ionospheric effects on the altimeter range measurement are also on the order of 10 cm during the GEOS-C launch and early operation period.
On the Conceptual Ambiguity Surrounding Perceived Message Effectiveness

PubMed Central

Yzer, Marco; LoRusso, Susan; Nagler, Rebekah H.

2015-01-01

Health message quality is best understood in terms of a message’s ability to effectively produce change in the variables that it was designed to change. The importance of determining a message’s effectiveness in producing change prior to implementation is clear: The better a message’s potential effectiveness is understood, the better able interventionists are to distinguish effective from ineffective messages before allocating scarce resources to message implementation. For this purpose, research has relied on perceived message effectiveness measures as a proxy of a message’s potential effectiveness. Remarkably, however, very little conceptual work has been done on perceived message effectiveness, which renders its measures under-informed and inconsistent across studies. To encourage greater conceptual work on this important construct, we review several threats to the validity of existing measures and consider strategies for improving our understanding of perceived message effectiveness. PMID:25470437
Effects of measurement errors on psychometric measurements in ergonomics studies: Implications for correlations, ANOVA, linear regression, factor analysis, and linear discriminant analysis.

PubMed

Liu, Yan; Salvendy, Gavriel

2009-05-01

This paper aims to demonstrate the effects of measurement errors on psychometric measurements in ergonomics studies. A variety of sources can cause random measurement errors in ergonomics studies and these errors can distort virtually every statistic computed and lead investigators to erroneous conclusions. The effects of measurement errors on five most widely used statistical analysis tools have been discussed and illustrated: correlation; ANOVA; linear regression; factor analysis; linear discriminant analysis. It has been shown that measurement errors can greatly attenuate correlations between variables, reduce statistical power of ANOVA, distort (overestimate, underestimate or even change the sign of) regression coefficients, underrate the explanation contributions of the most important factors in factor analysis and depreciate the significance of discriminant function and discrimination abilities of individual variables in discrimination analysis. The discussions will be restricted to subjective scales and survey methods and their reliability estimates. Other methods applied in ergonomics research, such as physical and electrophysiological measurements and chemical and biomedical analysis methods, also have issues of measurement errors, but they are beyond the scope of this paper. As there has been increasing interest in the development and testing of theories in ergonomics research, it has become very important for ergonomics researchers to understand the effects of measurement errors on their experiment results, which the authors believe is very critical to research progress in theory development and cumulative knowledge in the ergonomics field.

Productivity costs measurement through quality of life? A response to the recommendation of the Washington Panel.

PubMed

Brouwer, W B; Koopmanschap, M A; Rutten, F F

1997-01-01

This paper comments on the recently published guidelines of the Washington Panel on incorporation of indirect non-medical costs, or productivity costs, in economic evaluations of health care. Traditionally the human capital or more recently the friction cost method is used to measure these costs. The Panel, however, recommends incorporating productivity costs as health effects in the denominator of the C/E ratio. This paper argues that incorporation of productivity costs in cost-effectiveness analysis expressed as health effects is not correct. Only direct health related effects on quality of life that cannot be meaningfully monetarized should be considered as health effects. Furthermore, measuring productivity costs in terms of quality of life may lead to misrepresentation of these costs from a societal viewpoint. This misrepresentation occurs because of the existence of social security systems and private insurance compensating for income reductions from disease. Furthermore, the patient's viewpoint is useful for quality of life measurement, but not for measuring productivity costs from a societal perspective. Finally, alternative recommendations are formulated for incorporating societal productivity costs in economic evaluations of health care.
The Effectiveness of Policy and Health Education Strategies for Reducing Adolescent Smoking: A Review of the Evidence.

ERIC Educational Resources Information Center

Willemsen, Marc C.; de Zwart, Wil M.

1999-01-01

Reviews international literature to identify the most effective measures to prevent smoking among adolescents. Concludes that isolated measures produce little effect. Most effect may be expected from a combination of a complete ban on tobacco advertising, increasing prices, restricting tobacco product sales to tobacconists, mass media education…
Effects of age, tenure, training, and job complexity on technical performance.

PubMed

Sparrow, P R; Davies, D R

1988-09-01

Effects on performance of age, tenure, training level, and job complexity were investigated in a cross-sectional study using a sample of 1,308 service engineers employed by a multinational office equipment company. Two measures of job performance were derived from production record data, one relating to the quality of servicing and the other to the speed with which services were completed. Scores for each performance measure were analyzed by analysis of variance. For the quality of servicing measure, a significant main effect of age and a significant Age X Training interaction were obtained, and the relation between age and job performance took the form of an inverted U. For the speed of servicing measure, the main effects of age, tenure, training level, and job complexity were significant and there were no significant interactions. However, for both performance measures, age accounted for only a very small proportion of the variance. We discuss these results with reference to the existing literature on age and technical job performance, and conclude that training, especially if it is recent, may moderate adverse effects of age on job performance.
Prognostic score–based balance measures for propensity score methods in comparative effectiveness research

PubMed Central

Stuart, Elizabeth A.; Lee, Brian K.; Leacy, Finbarr P.

2013-01-01

Objective Examining covariate balance is the prescribed method for determining when propensity score methods are successful at reducing bias. This study assessed the performance of various balance measures, including a proposed balance measure based on the prognostic score (also known as the disease-risk score), to determine which balance measures best correlate with bias in the treatment effect estimate. Study Design and Setting The correlations of multiple common balance measures with bias in the treatment effect estimate produced by weighting by the odds, subclassification on the propensity score, and full matching on the propensity score were calculated. Simulated data were used, based on realistic data settings. Settings included both continuous and binary covariates and continuous covariates only. Results The standardized mean difference in prognostic scores, the mean standardized mean difference, and the mean t-statistic all had high correlations with bias in the effect estimate. Overall, prognostic scores displayed the highest correlations of all the balance measures considered. Prognostic score measure performance was generally not affected by model misspecification and performed well under a variety of scenarios. Conclusion Researchers should consider using prognostic score–based balance measures for assessing the performance of propensity score methods for reducing bias in non-experimental studies. PMID:23849158
Improving the surface metrology accuracy of optical profilers by using multiple measurements

NASA Astrophysics Data System (ADS)

Xu, Xudong; Huang, Qiushi; Shen, Zhengxiang; Wang, Zhanshan

2016-10-01

The performance of high-resolution optical systems is affected by small angle scattering at the mid-spatial-frequency irregularities of the optical surface. Characterizing these irregularities is, therefore, important. However, surface measurements obtained with optical profilers are influenced by additive white noise, as indicated by the heavy-tail effect observable on their power spectral density (PSD). A multiple-measurement method is used to reduce the effects of white noise by averaging individual measurements. The intensity of white noise is determined using a model based on the theoretical PSD of fractal surface measurements with additive white noise. The intensity of white noise decreases as the number of times of multiple measurements increases. Using multiple measurements also increases the highest observed spatial frequency; this increase is derived and calculated. Additionally, the accuracy obtained using multiple measurements is carefully studied, with the analysis of both the residual reference error after calibration, and the random errors appearing in the range of measured spatial frequencies. The resulting insights on the effects of white noise in optical profiler measurements and the methods to mitigate them may prove invaluable to improve the quality of surface metrology with optical profilers.
The effects of drug market regulation on pharmaceutical prices in Europe: overview and evidence from the market of ACE inhibitors

PubMed Central

2011-01-01

This study provides an overview of policy measures targeting pharmaceutical expenditure in Europe and analyses their impact on originator pharmaceutical prices. Panel data methods are used to examine the market of ACE Inhibitors in six European countries (Denmark, France, Germany, Netherlands, Sweden, United Kingdom) over period 1991-2006. We find that although some measures are effective in reducing originator prices, others appear to have an insignificant effect. Results suggest that supply side measures such as mandatory generic substitution, regressive pharmacy mark-ups and claw-backs are effective in reducing pharmaceuticals prices. Results are not as strong for demand side measures. Profit controls and the use of cost-effectiveness analysis appear to have a negative effect on prices, while results on reference pricing are inconclusive. Findings also indicate that, although originator prices are not immediately affected by generic entry, they may be influenced by changes in generic prices post patent expiry. PMID:22828053
Elimination of 'ghost'-effect-related systematic error in metrology of X-ray optics with a long trace profiler

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yashchuk, Valeriy V.; Irick, Steve C.; MacDowell, Alastair A.

2005-04-28

A data acquisition technique and relevant program for suppression of one of the systematic effects, namely the ''ghost'' effect, of a second generation long trace profiler (LTP) is described. The ''ghost'' effect arises when there is an unavoidable cross-contamination of the LTP sample and reference signals into one another, leading to a systematic perturbation in the recorded interference patterns and, therefore, a systematic variation of the measured slope trace. Perturbations of about 1-2 {micro}rad have been observed with a cylindrically shaped X-ray mirror. Even stronger ''ghost'' effects show up in an LTP measurement with a mirror having a toroidal surfacemore » figure. The developed technique employs separate measurement of the ''ghost''-effect-related interference patterns in the sample and the reference arms and then subtraction of the ''ghost'' patterns from the sample and the reference interference patterns. The procedure preserves the advantage of simultaneously measuring the sample and reference signals. The effectiveness of the technique is illustrated with LTP metrology of a variety of X-ray mirrors.« less
Determining the Correlation of Effective Middle School Math Teachers and Math Student Achievement

ERIC Educational Resources Information Center

Becoats, Jocelyn B.

2009-01-01

This study determined whether there was a significant relationship between teacher effect data in middle school mathematics and a teachers years of experience and whether there was a significant relationship between an effective teacher as measured by the total score on the Haberman instrument and teacher effect scores as measured by SAS EVAAS,…
Distributed fiber strain and vibration sensor based on Brillouin optical time-domain reflectometry and polarization optical time-domain reflectometry.

PubMed

Wang, Feng; Zhang, Xuping; Wang, Xiangchuan; Chen, Haisheng

2013-07-15

A distributed fiber strain and vibration sensor which effectively combines Brillouin optical time-domain reflectometry and polarization optical time-domain reflectometry is proposed. Two reference beams with orthogonal polarization states are, respectively, used to perform the measurement. By using the signal obtained from either reference beam, the vibration of fiber can be measured from the polarization effect. After combining the signals obtained by both reference beams, the strain can be measured from the Brillouin effect. In the experiment, 10 m spatial resolution, 0.6 kHz frequency measurement range, 2.5 Hz frequency resolution, and 0.2 MHz uncertainty of Brillouin frequency measurement are realized for a 4 km sensing distance.
Retail price as an outcome measure for the effectiveness of drug law enforcement.

PubMed

Bright, David A; Ritter, Alison

2010-09-01

One outcome measure of law enforcement effectiveness is the reduction in drug consumption which occurs as a result of law enforcement interventions. A theoretical relationship between drug consumption and retail price has promoted the use of retail price as a surrogate measure for consumption. In the current article, retail price is examined as a potential outcome measure for the effectiveness of law enforcement. The predictions regarding the relationship between law enforcement intensity and price are only partially supported by research. Explanations for the disconnect between the drug law enforcement activity and retail price include: rapid adaptation by market players, enforcement swamping, assumptions of rational actors, short-run versus long-run effects, structure of the illicit market, simultaneous changes that affect price in perverse ways, the role of violence in markets, and data limitations. Researchers who use retail price as an outcome measure need to take into account the complex relationship between drug law enforcement interventions and the retail price of illicit drugs. Viable outcome measures which can be used as complements to retail price are worth investigation. Copyright 2009 Elsevier B.V. All rights reserved.
Effect of anisoplanatism on the measurement accuracy of an extended-source Hartmann-Shack wavefront sensor

NASA Astrophysics Data System (ADS)

Woeger, Friedrich; Rimmele, Thomas

2009-10-01

We analyze the effect of anisoplanatic atmospheric turbulence on the measurement accuracy of an extended-source Hartmann-Shack wavefront sensor (HSWFS). We have numerically simulated an extended-source HSWFS, using a scenery of the solar surface that is imaged through anisoplanatic atmospheric turbulence and imaging optics. Solar extended-source HSWFSs often use cross-correlation algorithms in combination with subpixel shift finding algorithms to estimate the wavefront gradient, two of which were tested for their effect on the measurement accuracy. We find that the measurement error of an extended-source HSWFS is governed mainly by the optical geometry of the HSWFS, employed subpixel finding algorithm, and phase anisoplanatism. Our results show that effects of scintillation anisoplanatism are negligible when cross-correlation algorithms are used.
Stereotype threat and group differences in test performance: a question of measurement invariance.

PubMed

Wicherts, Jelte M; Dolan, Conor V; Hessen, David J

2005-11-01

Studies into the effects of stereotype threat (ST) on test performance have shed new light on race and sex differences in achievement and intelligence test scores. In this article, the authors relate ST theory to the psychometric concept of measurement invariance and show that ST effects may be viewed as a source of measurement bias. As such, ST effects are detectable by means of multi-group confirmatory factor analysis. This enables research into the generalizability of ST effects to real-life or high-stakes testing. The modeling approach is described in detail and applied to 3 experiments in which the amount of ST for minorities and women was manipulated. Results indicate that ST results in measurement bias of intelligence and mathematics tests. ((c) 2005 APA, all rights reserved).
Removal of batch effects using distribution-matching residual networks.

PubMed

Shaham, Uri; Stanton, Kelly P; Zhao, Jun; Li, Huamin; Raddassi, Khadir; Montgomery, Ruth; Kluger, Yuval

2017-08-15

Sources of variability in experimentally derived data include measurement error in addition to the physical phenomena of interest. This measurement error is a combination of systematic components, originating from the measuring instrument and random measurement errors. Several novel biological technologies, such as mass cytometry and single-cell RNA-seq (scRNA-seq), are plagued with systematic errors that may severely affect statistical analysis if the data are not properly calibrated. We propose a novel deep learning approach for removing systematic batch effects. Our method is based on a residual neural network, trained to minimize the Maximum Mean Discrepancy between the multivariate distributions of two replicates, measured in different batches. We apply our method to mass cytometry and scRNA-seq datasets, and demonstrate that it effectively attenuates batch effects. our codes and data are publicly available at https://github.com/ushaham/BatchEffectRemoval.git. yuval.kluger@yale.edu. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com
Mapping the absolute magnetic field and evaluating the quadratic Zeeman-effect-induced systematic error in an atom interferometer gravimeter

NASA Astrophysics Data System (ADS)

Hu, Qing-Qing; Freier, Christian; Leykauf, Bastian; Schkolnik, Vladimir; Yang, Jun; Krutzik, Markus; Peters, Achim

2017-09-01

Precisely evaluating the systematic error induced by the quadratic Zeeman effect is important for developing atom interferometer gravimeters aiming at an accuracy in the μ Gal regime (1 μ Gal =10-8m /s2 ≈10-9g ). This paper reports on the experimental investigation of Raman spectroscopy-based magnetic field measurements and the evaluation of the systematic error in the gravimetric atom interferometer (GAIN) due to quadratic Zeeman effect. We discuss Raman duration and frequency step-size-dependent magnetic field measurement uncertainty, present vector light shift and tensor light shift induced magnetic field measurement offset, and map the absolute magnetic field inside the interferometer chamber of GAIN with an uncertainty of 0.72 nT and a spatial resolution of 12.8 mm. We evaluate the quadratic Zeeman-effect-induced gravity measurement error in GAIN as 2.04 μ Gal . The methods shown in this paper are important for precisely mapping the absolute magnetic field in vacuum and reducing the quadratic Zeeman-effect-induced systematic error in Raman transition-based precision measurements, such as atomic interferometer gravimeters.
Single-case synthesis tools II: Comparing quantitative outcome measures.

PubMed

Zimmerman, Kathleen N; Pustejovsky, James E; Ledford, Jennifer R; Barton, Erin E; Severini, Katherine E; Lloyd, Blair P

2018-03-07

Varying methods for evaluating the outcomes of single case research designs (SCD) are currently used in reviews and meta-analyses of interventions. Quantitative effect size measures are often presented alongside visual analysis conclusions. Six measures across two classes-overlap measures (percentage non-overlapping data, improvement rate difference, and Tau) and parametric within-case effect sizes (standardized mean difference and log response ratio [increasing and decreasing])-were compared to determine if choice of synthesis method within and across classes impacts conclusions regarding effectiveness. The effectiveness of sensory-based interventions (SBI), a commonly used class of treatments for young children, was evaluated. Separately from evaluations of rigor and quality, authors evaluated behavior change between baseline and SBI conditions. SBI were unlikely to result in positive behavior change across all measures except IRD. However, subgroup analyses resulted in variable conclusions, indicating that the choice of measures for SCD meta-analyses can impact conclusions. Suggestions for using the log response ratio in SCD meta-analyses and considerations for understanding variability in SCD meta-analysis conclusions are discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.
Measurement of geomagnetic cutoff rigidities and particle fluxes below geomagnetic cutoff near Palestine, Texas.

NASA Technical Reports Server (NTRS)

Pennypacker, C. R.; Smoot, G. F.; Buffington, A.; Muller, R. A.; Smith, L. H.

1973-01-01

We report a high-statistics magnetic spectrometer measurement of the geomagnetic cutoff rigidity and related effects at Palestine, Texas. The effective cutoffs we observe are in agreement with computer-calculated cutoffs. We also report measured spectra of albedo and atmospheric secondary particles that come below geomagnetic cutoff.
Measurement of geomagnetic cutoff rigidities and particle fluxes below geomagnetic cutoff near Palestine, Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pennypacker, C.R.; Smoot, G.F.; Buffington, A.

1973-04-01

A high-statistics magnetic spectrometer measurement of the geomagnetic cutoff rigidity and related effects at Palestine, Texas is reported. The effective cutoffs observed are in agreement with computer-calculated cutoffs. Measured spectra of albedo and atmospheric secondary particles that come below geomagnetic cutoff are also reported. (auth)
Health Systems and Their Assessment: A Methodological Proposal of the Synthetic Outcome Measure

PubMed Central

Romaniuk, Piotr; Kaczmarek, Krzysztof; Syrkiewicz-Świtała, Magdalena; Holecki, Tomasz; Szromek, Adam R.

2018-01-01

The effectiveness of health systems is an area of constant interest for public health researchers and practitioners. The varied approach to effectiveness itself has resulted in numerous methodological proposals related to its measurement. The limitations of the currently used methods lead to a constant search for better tools for the assessment of health systems. This article shows the possibilities of using the health system synthetic outcome measure (SOM) for this purpose. It is an original tool using 41 indicators referring to the epidemiological situation, health behaviors, and factors related to the health-care system, which allows a relatively quick and easy assessment of the health system in terms of its effectiveness. Construction of the measure of health system functioning in such a way allowed its presentation in dynamic perspective, i.e., assessing not only the health system itself in a given moment of time but also changes in the value of the effectiveness measures. In order to demonstrate the cognitive value of the SOM, the analysis of the effectiveness of health systems in 21 countries of Central and Eastern Europe during the transformation period was carried out. The mean SOM values calculated on the basis of the component measures allowed to differentiate countries in terms of the effectiveness of their health systems. Considering the whole period, a similar level of health system effects can be observed in Slovenia, Croatia, Czech Republic, Slovakia, Poland, Macedonia, and Albania. In the middle group, Hungary, Romania, Latvia, Lithuania, Georgia, Estonia, Bulgaria, Belarus, and Armenia were found. The third group, weakest in terms of achieved effects, was formed by health systems in countries like Ukraine, Moldova, and Russia. The presented method allows for the analysis of the health system outcomes from a comparative angle, eliminating arbitrariness of pinpointing a model solution as a potential reference point in the assessment of the systems. The measure, with the use of additional statistical tools to establish correlations with elements of the external and internal environment of a health system, allows for conducting analyses of conditions for differences in the effects of health system operation and circumstances for the effectiveness of reform processes.
Health Systems and Their Assessment: A Methodological Proposal of the Synthetic Outcome Measure.

PubMed

Romaniuk, Piotr; Kaczmarek, Krzysztof; Syrkiewicz-Świtała, Magdalena; Holecki, Tomasz; Szromek, Adam R

2018-01-01

The effectiveness of health systems is an area of constant interest for public health researchers and practitioners. The varied approach to effectiveness itself has resulted in numerous methodological proposals related to its measurement. The limitations of the currently used methods lead to a constant search for better tools for the assessment of health systems. This article shows the possibilities of using the health system synthetic outcome measure (SOM) for this purpose. It is an original tool using 41 indicators referring to the epidemiological situation, health behaviors, and factors related to the health-care system, which allows a relatively quick and easy assessment of the health system in terms of its effectiveness. Construction of the measure of health system functioning in such a way allowed its presentation in dynamic perspective, i.e., assessing not only the health system itself in a given moment of time but also changes in the value of the effectiveness measures. In order to demonstrate the cognitive value of the SOM, the analysis of the effectiveness of health systems in 21 countries of Central and Eastern Europe during the transformation period was carried out. The mean SOM values calculated on the basis of the component measures allowed to differentiate countries in terms of the effectiveness of their health systems. Considering the whole period, a similar level of health system effects can be observed in Slovenia, Croatia, Czech Republic, Slovakia, Poland, Macedonia, and Albania. In the middle group, Hungary, Romania, Latvia, Lithuania, Georgia, Estonia, Bulgaria, Belarus, and Armenia were found. The third group, weakest in terms of achieved effects, was formed by health systems in countries like Ukraine, Moldova, and Russia. The presented method allows for the analysis of the health system outcomes from a comparative angle, eliminating arbitrariness of pinpointing a model solution as a potential reference point in the assessment of the systems. The measure, with the use of additional statistical tools to establish correlations with elements of the external and internal environment of a health system, allows for conducting analyses of conditions for differences in the effects of health system operation and circumstances for the effectiveness of reform processes.
Can Early Intervention Improve Maternal Well-Being? Evidence from a Randomized Controlled Trial

PubMed Central

Doyle, Orla; Delaney, Liam; O’Farrelly, Christine; Fitzpatrick, Nick; Daly, Michael

2017-01-01

Objective This study estimates the effect of a targeted early childhood intervention program on global and experienced measures of maternal well-being utilizing a randomized controlled trial design. The primary aim of the intervention is to improve children’s school readiness skills by working directly with parents to improve their knowledge of child development and parenting behavior. One potential externality of the program is well-being benefits for parents given its direct focus on improving parental coping, self-efficacy, and problem solving skills, as well as generating an indirect effect on parental well-being by targeting child developmental problems. Methods Participants from a socio-economically disadvantaged community are randomly assigned during pregnancy to an intensive 5-year home visiting parenting program or a control group. We estimate and compare treatment effects on multiple measures of global and experienced well-being using permutation testing to account for small sample size and a stepdown procedure to account for multiple testing. Results The intervention has no impact on global well-being as measured by life satisfaction and parenting stress or experienced negative affect using episodic reports derived from the Day Reconstruction Method (DRM). Treatment effects are observed on measures of experienced positive affect derived from the DRM and a measure of mood yesterday. Conclusion The limited treatment effects suggest that early intervention programs may produce some improvements in experienced positive well-being, but no effects on negative aspects of well-being. Different findings across measures may result as experienced measures of well-being avoid the cognitive biases that impinge upon global assessments. PMID:28095505

Improving Precautionary Communication in the EMF Field? Effects of Making Messages Consistent and Explaining the Effectiveness of Precautions.

PubMed

Boehmert, Christoph; Wiedemann, Peter; Croft, Rodney

2016-10-09

Many radiation health agencies communicate precautionary measures regarding the use of mobile communication devices, e.g. the use of a headset while talking on the phone. These precautionary messages have, however, been shown to unintentionally increase risk perceptions about radiofrequency electromagnetic fields (RF-EMFs). The current study tested two potential ways of amending precautionary messages in order to minimise this unintentional effect. Firstly, the messages' potential to be perceived as inconsistent and thereby raise suspicions was addressed; secondly, the effectiveness of the precautions was explained. An experimental design was applied in which a quota sample of 1717 Australian residents was randomly assigned to one of six message conditions. Three different risk perception measures served as dependent variables, two of them are conditional measures. The original effect of precautionary messages to amplify risk perceptions could not be replicated. Furthermore, amending precautionary messages in favour of more consistency had no effect, while explaining the effectiveness of the precautions increased conditional risk perception under the condition that no precautions are taken. This was contrary to our assumptions. We infer from these results that changing precautionary messages in terms of consistency and effectiveness in order to reduce risk perception is hardly possible. The use of conditional risk perception measures seems fruitful for studies looking at the effects of precautionary or protective messages, given that previous studies have only investigated effects on unconditional risk perception. However, the present results should not be over-interpreted as the measures' validity in the EMF context still needs further investigation.
The effectiveness of policy and health education strategies for reducing adolescent smoking: a review of the evidence.

PubMed

Willemsen, M C; De Zwart, W M

1999-10-01

This paper identifies the most effective measures to prevent smoking among adolescents. A review was made of the international literature concerning a ban on tobacco advertising, restrictions on sales to youth, product regulation, price increase of cigarettes and educational strategies. It is concluded that isolated measures produce little effect. Most effect may be expected from a combination of a complete ban on tobacco advertising, increasing prices, restricting tobacco product sales to tobacconists, mass media education aimed at youth and intensifying school education. A less effective measure is limiting the age at which adolescents are allowed to buy cigarettes. Copyright 1999 The Association for Professionals in Services for Adolescents.
Stochastic sensitivity measure for mistuned high-performance turbines

NASA Technical Reports Server (NTRS)

Murthy, Durbha V.; Pierre, Christophe

1992-01-01

A stochastic measure of sensitivity is developed in order to predict the effects of small random blade mistuning on the dynamic aeroelastic response of turbomachinery blade assemblies. This sensitivity measure is based solely on the nominal system design (i.e., on tuned system information), which makes it extremely easy and inexpensive to calculate. The measure has the potential to become a valuable design tool that will enable designers to evaluate mistuning effects at a preliminary design stage and thus assess the need for a full mistuned rotor analysis. The predictive capability of the sensitivity measure is illustrated by examining the effects of mistuning on the aeroelastic modes of the first stage of the oxidizer turbopump in the Space Shuttle Main Engine. Results from a full analysis mistuned systems confirm that the simple stochastic sensitivity measure predicts consistently the drastic changes due to misturning and the localization of aeroelastic vibration to a few blades.
The effects of phase III cardiac rehabilitation in serum and salivary Hs-CRP and anthropometric measurements in patients with coronary artery disease.

PubMed

Jamshidpour, Boshra; Moghadam, Behrouz Attarbashi; Vasaghi-Gharamaleki, Behnoosh; Mirzaii-Dizgah, Iraj; Nejatian, Mostafa

2013-09-01

Cardiac rehabilitation is a key part in the treatment of coronary artery disease (CAD) by its anti-infammatory effects. However, the effect of exercise training programs on salivary concentrations of high-sensitivity C-reactive protein (hs-CRP) in patients with coronary artery disease has not been well studied. The objective of this study was to evaluate the effect of phase III cardiac rehabilitation on serum and salivary levels of hs-CRP, in relation to the anthropometric measurements of obesity and the relationship between salivary and serum levels of hs-CRP in CAD male patients. Forty male volunteers (45-75 years) with CAD participated in 6 to 8 weeks of moderate intensity aerobic exercise training consisting of 45 minutes sessions of treadmill, stationary bicycle and arm ergometer. Anthropometric measurements of obesity, serum level of hs-CRP, stimulated and nonstimulated salivary level of hs-CRP were measured at the beginning, in the middle and at the end of exercise sessions. All anthropometric measurements increased (p < 0.05) following cardiac rehabilitation except waist-hip ratio. Serum hs-CRP level reduced by 36% independent to the anthropometric measurements changes. Stimulated and nonstimulated salivary hs-CRP level decreased 68 and 54%, respectively, after 24 sessions of cardiac rehabilitation. Nonstimulated salivary hs-CRP levels correlated to serum levels of hs-CRP at baseline and after 24 sessions (p < 0.05). Phase III cardiac rehabilitation seems to be effective to improve serum and salivary hs-CRP concentrations independent of anthropometric measurements. Nonstimulated salivary hs-CRP measurement could be a surrogate for blood measurement of hs-CRP during cardiac rehabilitation in male patients with CAD.
Measurement Error Calibration in Mixed-Mode Sample Surveys

ERIC Educational Resources Information Center

Buelens, Bart; van den Brakel, Jan A.

2015-01-01

Mixed-mode surveys are known to be susceptible to mode-dependent selection and measurement effects, collectively referred to as mode effects. The use of different data collection modes within the same survey may reduce selectivity of the overall response but is characterized by measurement errors differing across modes. Inference in sample surveys…
Questionnaire and behavioral task measures of impulsivity are differentially associated with body mass index: A comprehensive meta-analysis.

PubMed

Emery, Rebecca L; Levine, Michele D

2017-08-01

Although impulsivity has been implicated in the development and maintenance of obesity, evidence linking impulsivity to obesity has been mixed. These mixed findings may be related to differences in the type of impulsivity measures used and the varied domains of impulsivity assessed by each measure. The present meta-analysis aimed to examine the impact of measurement selection on the relationship between impulsivity and body mass index (BMI). A total of 142 articles met inclusion criteria and were comprised of 315,818 participants. Effect sizes consisted of Fisher's z-transformed correlation coefficients, which were weighted by the inverse variance to establish the grand mean estimate of the relationship between impulsivity and BMI. Overall weighted mean effect sizes also were computed for each type and domain of impulsivity measure. Moderator analyses were conducted using a mixed-effects approach to determine if the relationship between impulsivity and BMI varied between the types of impulsivity measures used. On average, participants were 32.25 (SD = 12.41) years of age, with a BMI of 26.63 (SD = 5.73) kg/m2. The overall relationship between impulsivity and BMI was small but significant (r = .07). Behavioral task measures of impulsivity produced significantly larger effect sizes (r = .10) than did questionnaire measures of impulsivity (r = .05). Domains of impulsivity that assessed disinhibited behaviors (r = .10), attentional deficits (r = .11), impulsive decision-making (r = .10), and cognitive inflexibility (r = .17) produced significant effect sizes. These meta-analytic findings demonstrate that impulsivity is positively associated with BMI and further document that this association varies by the type of impulsivity measure used and the domain of impulsivity assessed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
ISS Plasma Interaction: Measurements and Modeling

NASA Technical Reports Server (NTRS)

Barsamian, H.; Mikatarian, R.; Alred, J.; Minow, J.; Koontz, S.

2004-01-01

Ionospheric plasma interaction effects on the International Space Station are discussed in the following paper. The large structure and high voltage arrays of the ISS represent a complex system interacting with LEO plasma. Discharge current measurements made by the Plasma Contactor Units and potential measurements made by the Floating Potential Probe delineate charging and magnetic induction effects on the ISS. Based on theoretical and physical understanding of the interaction phenomena, a model of ISS plasma interaction has been developed. The model includes magnetic induction effects, interaction of the high voltage solar arrays with ionospheric plasma, and accounts for other conductive areas on the ISS. Based on these phenomena, the Plasma Interaction Model has been developed. Limited verification of the model has been performed by comparison of Floating Potential Probe measurement data to simulations. The ISS plasma interaction model will be further tested and verified as measurements from the Floating Potential Measurement Unit become available, and construction of the ISS continues.
An Integrated WRF-CAMx Modeling Approach for Impact Analysis of Implementing the Emergency PM2.5 Control Measures during Red Alerts in Beijing in December 2015

NASA Astrophysics Data System (ADS)

Jia, J.; Cheng, S.; Lei, L.; Lang, J.

2017-12-01

In December 2015, the Beijing-Tianjin-Hebei (BTH) region experienced several episodes of heavy air pollution. Beijing municipal government therefore issued 2 red alerts on December 7 and 19, respectively, and also implemented emergency control measures to alleviate the negative effects of pollution. It is estimated that the heavy pollutions in 2 red alert periods in Beijing were due mainly to the accumulation of air pollutants from local emission sources and the transboundary transport of pollutants from surrounding areas. The collected meteorological and PM2.5 data indicate that the severity of air pollutions were enlarged by the poor meteorological conditions along with lower mixing layer height. In this study, the WRF-CAMx modeling system was utilized not only for analyzing the contributions of PM2.5 from different sources, but also for quantitatively assessing the effects of implementing various emergency control measures on PM2.5 pollution control during the red alert periods. The modeling results show that local emissions were the most dominant contributors (64.8%-83.5%) among all emission sources, while the main external contributions came from the city of Baoding (3.4%-9.3%). In addition, among 5 different emission source categories, coal and traffic were the two dominant contributors to PM2.5 concentration in urban area of Beijing. Then four pollution control scenarios were designed particularly to investigate the effectiveness of the emergency control measures, and the results show that, generally these emergency control measures have positive effects on air pollution reduction. In particular, restrictive measures of traffic volume control and industrial activity shutdown/suspension have been found as the most effective measures in comparison to other emergency control measures. It is recommended that such effective measures should be considered to implement when next time similar heavy air pollutions occur in the city of Beijing.
Phase noise measurements with a cryogenic power-splitter to minimize the cross-spectral collapse effect

NASA Astrophysics Data System (ADS)

Hati, Archita; Nelson, Craig W.; Pappas, David P.; Howe, David A.

2017-11-01

The cross-spectrum noise measurement technique enables enhanced resolution of spectral measurements. However, it has disadvantages, namely, increased complexity, inability of making real-time measurements, and bias due to the "cross-spectral collapse" (CSC) effect. The CSC can occur when the spectral density of a random process under investigation approaches the thermal noise of the power splitter. This effect can severely bias results due to a differential measurement between the investigated noise and the anti-correlated (phase-inverted) noise of the power splitter. In this paper, we report an accurate measurement of the phase noise of a thermally limited electronic oscillator operating at room temperature (300 K) without significant CSC bias. We mitigated the problem by cooling the power splitter to liquid helium temperature (4 K). We quantify errors of greater than 1 dB that occur when the thermal noise of the oscillator at room temperature is measured with the power splitter at temperatures above 77 K.
FMCSA Safety Program Effectiveness Measurement: Carrier Intervention Effectiveness Model, Version 1.1-Report for FY 2014 Interventions - Analysis Brief

DOT National Transportation Integrated Search

2018-04-01

The Carrier Intervention Effectiveness Model (CIEM) provides the Federal Motor Carrier Safety Administration (FMCSA) with a tool for measuring the safety benefits of carrier interventions conducted under the Compliance, Safety, Accountability (CSA) e...
FMCSA safety program effectiveness measurement : carrier intervention effectiveness model, version 1.1 - report for FY 2013 interventions : analysis brief

DOT National Transportation Integrated Search

2017-04-01

The Carrier Intervention Effectiveness Model (CIEM) provides the Federal Motor Carrier Safety Administration (FMCSA) with a tool for measuring the safety benefits of carrier interventions conducted under the Compliance, Safety, Accountability (CSA) e...
Understanding Teacher Effectiveness: Significant State Data Capacity Is Required to Measure and Improve Teacher Effectiveness. Data for Action 2012

ERIC Educational Resources Information Center

Data Quality Campaign, 2012

2012-01-01

States are increasingly focused on understanding and improving teacher effectiveness. There are several funding opportunities that incentivize states to use data to inform measurements of teacher effectiveness. Local, state, and federal efforts support using data to improve teacher preparation programs. Preparation programs seek "access to data…
Do little interactions get lost in dark random forests?

PubMed

Wright, Marvin N; Ziegler, Andreas; König, Inke R

2016-03-31

Random forests have often been claimed to uncover interaction effects. However, if and how interaction effects can be differentiated from marginal effects remains unclear. In extensive simulation studies, we investigate whether random forest variable importance measures capture or detect gene-gene interactions. With capturing interactions, we define the ability to identify a variable that acts through an interaction with another one, while detection is the ability to identify an interaction effect as such. Of the single importance measures, the Gini importance captured interaction effects in most of the simulated scenarios, however, they were masked by marginal effects in other variables. With the permutation importance, the proportion of captured interactions was lower in all cases. Pairwise importance measures performed about equal, with a slight advantage for the joint variable importance method. However, the overall fraction of detected interactions was low. In almost all scenarios the detection fraction in a model with only marginal effects was larger than in a model with an interaction effect only. Random forests are generally capable of capturing gene-gene interactions, but current variable importance measures are unable to detect them as interactions. In most of the cases, interactions are masked by marginal effects and interactions cannot be differentiated from marginal effects. Consequently, caution is warranted when claiming that random forests uncover interactions.
Indirect measures as a signal for evaluative change.

PubMed

Perugini, Marco; Richetin, Juliette; Zogmaister, Cristina

2014-01-01

Implicit and explicit attitudes can be changed by using evaluative learning procedures. In this contribution we investigated an asymmetric effect of order of administration of indirect and direct measures on the detection of evaluative change: A change in explicit attitudes is more likely detected if they are measured after implicit attitudes, whereas these latter change regardless of the order. This effect was demonstrated in two studies (n=270; n=138) using the self-referencing task whereas it was not found in a third study (n=151) that used a supraliminal sequential evaluative conditioning paradigm. In all studies evaluative change was present only for contingency aware participants. We discuss a potential explanation underlying the order of measure effect entailing that, in some circumstances, an indirect measure is not only a measure but also a signal that can be detected through self-perception processes and further elaborated at the propositional level.
Effect of quality chronic disease management for alcohol and drug dependence on addiction outcomes.

PubMed

Kim, Theresa W; Saitz, Richard; Cheng, Debbie M; Winter, Michael R; Witas, Julie; Samet, Jeffrey H

2012-12-01

We examined the effect of the quality of primary care-based chronic disease management (CDM) for alcohol and/or other drug (AOD) dependence on addiction outcomes. We assessed quality using (1) a visit frequency based measure and (2) a self-reported assessment measuring alignment with the chronic care model. The visit frequency based measure had no significant association with addiction outcomes. The self-reported measure of care-when care was at a CDM clinic-was associated with lower drug addiction severity. The self-reported assessment of care from any healthcare source (CDM clinic or elsewhere) was associated with lower alcohol addiction severity and abstinence. These findings suggest that high quality CDM for AOD dependence may improve addiction outcomes. Quality measures based upon alignment with the chronic care model may better capture features of effective CDM care than a visit frequency measure. Copyright © 2012 Elsevier Inc. All rights reserved.
A note on image degradation, disability glare, and binocular vision

NASA Astrophysics Data System (ADS)

Rajaram, Vandana; Lakshminarayanan, Vasudevan

2013-08-01

Disability glare due to scattering of light causes a reduction in visual performance due to a luminous veil over the scene. This causes problem such as contrast detection. In this note, we report a study of the effect of this veiling luminance on human stereoscopic vision. We measured the effect of glare on the horopter measured using the apparent fronto-parallel plane (AFPP) criterion. The empirical longitudinal horopter measured using the AFPP criterion was analyzed using the so-called analytic plot. The analytic plot parameters were used for quantitative measurement of binocular vision. Image degradation plays a major effect on binocular vision as measured by the horopter. Under the conditions tested, it appears that if vision is sufficiently degraded then the addition of disability glare does not seem to significantly cause any further compromise in depth perception as measured by the horopter.
Determination of coupling coefficients at various zenith angles of the basis of the cosmic ray azimuth effect

NASA Technical Reports Server (NTRS)

Belskiy, S. A.; Dmitriev, B. A.; Romanov, A. M.

1975-01-01

The value of EW asymmetry and coupling coefficients at different zenith angles were measured by means of a double coincidence crossed telescope which gives an opportunity to measure simultaneously the intensity of the cosmic ray hard component at zenith angles from 0 to 84 deg in opposite azimuths. The advantages of determining the coupling coefficients by the cosmic ray azimuth effect as compared to their measurement by the latitudinal effect are discussed.
The effects of aging on the neural correlates of subjective and objective recollection.

PubMed

Duarte, Audrey; Henson, Richard N; Graham, Kim S

2008-09-01

High-functioning older adults can exhibit normal recollection when measured subjectively, via "remember" judgments, but not when measured objectively, via source judgments, whereas low-functioning older adults exhibit impairments for both measures. A potential explanation for this is that typical subjective and objective tests of recollection necessitate different processing demands, supported by distinct brain regions, and that deficits in these tests are observed according to the degree of age-related changes in these regions. Here, we used event-related functional magnetic resonance imaging to measure the effects of aging on neural correlates of subjective and objective measures of recollection, in young, high-functioning (Old-High) and low-functioning (Old-Low) older adults. Behaviorally, the Old-High group showed intact subjective ("remember" judgments) but impaired objective recollection (for 1 of 2 spatial or temporal sources), whereas the Old-Low group was impaired on both measures. Imaging data showed changes in parietal subjective recollection effects in the Old-Low group and in lateral frontal objective recollection effects in both older adult groups. Our results highlight the importance of examining performance variability in older adults and suggest that differential effects of aging on brain regions are associated with different patterns of performance on tests of subjective and objective recollection.
ANALYSIS OF THE MOMENTS METHOD EXPERIMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kloster, R.L.

1959-09-01

Monte Cario calculations show the effects of a plane water-air boundary on both fast neutron and gamma dose rates. Multigroup diffusion theory calculation for a reactor source shows the effects of a plane water-air boundary on thermal neutron dose rate. The results of Monte Cario and multigroup calculations are compared with experimental values. The predicted boundary effect for fast neutrons of 7.3% agrees within 16% with the measured effect of 6.3%. The gamma detector did not measure a boundary effect because it lacked sensitivity at low energies. However, the effect predicted for gamma rays of 5 to 10% is asmore » large as that for neutrons. An estimate of the boundary effect for thermal neutrons from a PoBe source is obtained from the results of muitigroup diffusion theory calcuiations for a reactor source. The calculated boundary effect agrees within 13% with the measured values. (auth)« less
Influence of electrically induced refraction and absorption on the measurement of spin current by pockels effect in GaAs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Houquan; She, Weilong, E-mail: shewl@mail.sysu.edu.cn

2015-03-14

The pockels effect could be utilized to measure spin current in semiconductors for linear electro-optic coefficient can be induced by spin current. When dc electric field is applied, the carriers will shift in k space, which could lead to the change of refraction and absorption coefficients. In this paper, we investigate the influence of the induced change of the refraction and absorption coefficients on the measurement of spin current by pockels effect in GaAs.

FMCSA safety program effectiveness measurement : carrier intervention effectiveness model (CIEM), version 1.1, report for Fiscal Year 2012 interventions.

DOT National Transportation Integrated Search

2016-11-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center (Volpe), has developed a quantitative model to measure the effectiveness of motor carrier interventions in terms of ...
FMCSA Safety Program Effectiveness Measurement: Carrier Intervention Effectiveness Model (CIEM), Version 1.1 Report for Fiscal Year 2014 Interventions

DOT National Transportation Integrated Search

2018-04-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center (Volpe), has developed a quantitative model to measure the effectiveness of motor carrier interventions in terms of ...
FMCSA safety program effectiveness measurement: carrier intervention effectiveness model (CIEM), version 1.1 : report for fiscal year 2013 interventions.

DOT National Transportation Integrated Search

2017-04-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center (Volpe), has developed a quantitative model to measure the effectiveness of motor carrier interventions in terms of ...
FMCSA safety program effectiveness measurement : Carrier Intervention Effectiveness Model (CIEM), Version 1.1, report for fiscal year 2013 interventions.

DOT National Transportation Integrated Search

2017-04-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National Transportation Systems Center (Volpe), has developed a quantitative model to measure the effectiveness of motor carrier interventions in terms of ...
Aspheric surface measurement using capacitive probes

NASA Astrophysics Data System (ADS)

Tao, Xin; Yuan, Daocheng; Li, Shaobo

2017-02-01

With the application of aspheres in optical fields, high precision and high efficiency aspheric surface metrology becomes a hot research topic. We describe a novel method of non-contact measurement of aspheric surface with capacitive probe. Taking an eccentric spherical surface as the object of study, the averaging effect of capacitive probe measurement and the influence of tilting the capacitive probe on the measurement results are investigated. By comparing measurement results from simultaneous measurement of the capacitive probe and contact probe of roundness instrument, this paper indicates the feasibility of using capacitive probes to test aspheric surface and proposes the compensation method of measurement error caused by averaging effect and the tilting of the capacitive probe.
Measurement and control of bias in patient reported outcomes using multidimensional item response theory.

PubMed

Dowling, N Maritza; Bolt, Daniel M; Deng, Sien; Li, Chenxi

2016-05-26

Patient-reported outcome (PRO) measures play a key role in the advancement of patient-centered care research. The accuracy of inferences, relevance of predictions, and the true nature of the associations made with PRO data depend on the validity of these measures. Errors inherent to self-report measures can seriously bias the estimation of constructs assessed by the scale. A well-documented disadvantage of self-report measures is their sensitivity to response style (RS) effects such as the respondent's tendency to select the extremes of a rating scale. Although the biasing effect of extreme responding on constructs measured by self-reported tools has been widely acknowledged and studied across disciplines, little attention has been given to the development and systematic application of methodologies to assess and control for this effect in PRO measures. We review the methodological approaches that have been proposed to study extreme RS effects (ERS). We applied a multidimensional item response theory model to simultaneously estimate and correct for the impact of ERS on trait estimation in a PRO instrument. Model estimates were used to study the biasing effects of ERS on sum scores for individuals with the same amount of the targeted trait but different levels of ERS. We evaluated the effect of joint estimation of multiple scales and ERS on trait estimates and demonstrated the biasing effects of ERS on these trait estimates when used as explanatory variables. A four-dimensional model accounting for ERS bias provided a better fit to the response data. Increasing levels of ERS showed bias in total scores as a function of trait estimates. The effect of ERS was greater when the pattern of extreme responding was the same across multiple scales modeled jointly. The estimated item category intercepts provided evidence of content independent category selection. Uncorrected trait estimates used as explanatory variables in prediction models showed downward bias. A comprehensive evaluation of the psychometric quality and soundness of PRO assessment measures should incorporate the study of ERS as a potential nuisance dimension affecting the accuracy and validity of scores and the impact of PRO data in clinical research and decision making.
Preliminary results of an examination of electronic cigarette user puff topography: the effect of a mouthpiece-based topography measurement device on plasma nicotine and subjective effects.

PubMed

Spindle, Tory R; Breland, Alison B; Karaoghlanian, Nareg V; Shihadeh, Alan L; Eissenberg, Thomas

2015-02-01

Electronic cigarettes (ECIGs) heat a nicotine-containing solution; the resulting aerosol is inhaled by the user. Nicotine delivery may be affected by users' puffing behavior (puff topography), and little is known about the puff topography of ECIG users. Puff topography can be measured using mouthpiece-based computerized systems. However, the extent to which a mouthpiece influences nicotine delivery and subjective effects in ECIG users is unknown. Plasma nicotine concentration, heart rate, and subjective effects were measured in 13 experienced ECIG users who used their preferred ECIG and liquid (≥ 12 mg/ml nicotine) during 2 sessions (with or without a mouthpiece). In both sessions, participants completed an ECIG use session in which they were instructed to take 10 puffs with 30-second inter-puff intervals. Puff topography was recorded in the mouthpiece condition. Almost all measures of the effects of ECIG use were independent of topography measurement. Collapsed across session, mean plasma nicotine concentration increased by 16.8 ng/ml, and mean heart rate increased by 8.5 bpm (ps < .05). Withdrawal symptoms decreased significantly after ECIG use. Participants reported that the mouthpiece affected awareness and made ECIG use more difficult. Relative to previously reported data for tobacco cigarette smokers using similar topography measurement equipment, ECIG-using participants took larger and longer puffs with lower flow rates. In experienced ECIG users, measuring ECIG topography did not influence ECIG-associated nicotine delivery or most measures of withdrawal suppression. Topography measurement systems will need to account for the low flow rates observed for ECIG users. © The Author 2014. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Validating Components of Teacher Effectiveness: A Random Assignment Study of Value-Added, Observation, and Survey Scores

ERIC Educational Resources Information Center

Bacher-Hicks, Andrew; Chin, Mark; Kane, Thomas J.; Staiger, Douglas O.

2015-01-01

Policy changes from the past decade have resulted in a growing interest in identifying effective teachers and their characteristics. This study is the third study to use data from a randomized experiment to test the validity of measures of teacher effectiveness. The authors collected effectiveness measures across three school years from three…
Random measurement error: Why worry? An example of cardiovascular risk factors.

PubMed

Brakenhoff, Timo B; van Smeden, Maarten; Visseren, Frank L J; Groenwold, Rolf H H

2018-01-01

With the increased use of data not originally recorded for research, such as routine care data (or 'big data'), measurement error is bound to become an increasingly relevant problem in medical research. A common view among medical researchers on the influence of random measurement error (i.e. classical measurement error) is that its presence leads to some degree of systematic underestimation of studied exposure-outcome relations (i.e. attenuation of the effect estimate). For the common situation where the analysis involves at least one exposure and one confounder, we demonstrate that the direction of effect of random measurement error on the estimated exposure-outcome relations can be difficult to anticipate. Using three example studies on cardiovascular risk factors, we illustrate that random measurement error in the exposure and/or confounder can lead to underestimation as well as overestimation of exposure-outcome relations. We therefore advise medical researchers to refrain from making claims about the direction of effect of measurement error in their manuscripts, unless the appropriate inferential tools are used to study or alleviate the impact of measurement error from the analysis.
Predicting Kindergarteners' Achievement and Motivation from Observational Measures of Teaching Effectiveness

ERIC Educational Resources Information Center

Mantzicopoulos, Panayota; Patrick, Helen; Strati, Anna; Watson, Jesse S.

2018-01-01

We investigated the premise that observation measures of instruction are indicators of effective teaching, using the definition of effectiveness articulated by departments of education: teaching that boosts student achievement. We argued that student motivation is equally as important as achievement in the evaluation of teaching effectiveness…
Preliminary Results of an Examination of Electronic Cigarette User Puff Topography: The Effect of a Mouthpiece-Based Topography Measurement Device on Plasma Nicotine and Subjective Effects

PubMed Central

Spindle, Tory R.; Breland, Alison B.; Karaoghlanian, Nareg V.; Shihadeh, Alan L.

2015-01-01

Introduction: Electronic cigarettes (ECIGs) heat a nicotine-containing solution; the resulting aerosol is inhaled by the user. Nicotine delivery may be affected by users’ puffing behavior (puff topography), and little is known about the puff topography of ECIG users. Puff topography can be measured using mouthpiece-based computerized systems. However, the extent to which a mouthpiece influences nicotine delivery and subjective effects in ECIG users is unknown. Methods: Plasma nicotine concentration, heart rate, and subjective effects were measured in 13 experienced ECIG users who used their preferred ECIG and liquid (≥12mg/ml nicotine) during 2 sessions (with or without a mouthpiece). In both sessions, participants completed an ECIG use session in which they were instructed to take 10 puffs with 30-second inter-puff intervals. Puff topography was recorded in the mouthpiece condition. Results: Almost all measures of the effects of ECIG use were independent of topography measurement. Collapsed across session, mean plasma nicotine concentration increased by 16.8ng/ml, and mean heart rate increased by 8.5 bpm (ps < .05). Withdrawal symptoms decreased significantly after ECIG use. Participants reported that the mouthpiece affected awareness and made ECIG use more difficult. Relative to previously reported data for tobacco cigarette smokers using similar topography measurement equipment, ECIG-using participants took larger and longer puffs with lower flow rates. Conclusions: In experienced ECIG users, measuring ECIG topography did not influence ECIG-associated nicotine delivery or most measures of withdrawal suppression. Topography measurement systems will need to account for the low flow rates observed for ECIG users. PMID:25239957
2014 Accomplishments-Tritium aging studies on stainless steel: Fracture toughness properties of forged stainless steels-Effect of hydrogen, forging strain rate, and forging temperature

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morgan, Michael J.

Forged stainless steels are used as the materials of construction for tritium reservoirs. During service, tritium diffuses into the reservoir walls and radioactively decays to helium-3. Tritium and decay helium cause a higher propensity for cracking which could lead to a tritium leak or delayed failure of a tritium reservoir. The factors that affect the tendency for crack formation and propagation include: Environment; steel type and microstructure; and, vessel configuration (geometry, pressure, residual stress). Fracture toughness properties are needed for evaluating the long-term effects of tritium on their structural properties. Until now, these effects have been characterized by measuring themore » effects of tritium on the tensile and fracture toughness properties of specimens fabricated from experimental forgings in the form of forward-extruded cylinders. A key result of those studies is that the long-term cracking resistance of stainless steels in tritium service depends greatly on the interaction between decay helium and the steels’ forged microstructure. New experimental research programs are underway and are designed to measure tritium and decay helium effects on the cracking properties of stainless steels using actual tritium reservoir forgings instead of the experimental forgings of past programs. The properties measured should be more representative of actual reservoir properties because the microstructure of the specimens tested will be more like that of the tritium reservoirs. The programs are designed to measure the effects of key forging variables on tritium compatibility and include three stainless steels, multiple yield strengths, and four different forging processes. The effects on fracture toughness of hydrogen and crack orientation were measured for type 316L forgings. In addition, hydrogen effects on toughness were measured for Type 304L block forgings having two different yield strengths. Finally, fracture toughness properties of type 304L stainless steel were measured for four different forging strain rates which and two forging temperatures. Tritium exposures have been and are being conducted on companion specimens for property measurements in the upcoming years.« less
Impact of parasitic thermal effects on thermoelectric property measurements by Harman method.

PubMed

Kwon, Beomjin; Baek, Seung-Hyub; Kim, Seong Keun; Kim, Jin-Sang

2014-04-01

Harman method is a rapid and simple technique to measure thermoelectric properties. However, its validity has been often questioned due to the over-simplified assumptions that this method relies on. Here, we quantitatively investigate the influence of the previously ignored parasitic thermal effects on the Harman method and develop a method to determine an intrinsic ZT. We expand the original Harman relation with three extra terms: heat losses via both the lead wires and radiation, and Joule heating within the sample. Based on the expanded Harman relation, we use differential measurement of the sample geometry to measure the intrinsic ZT. To separately evaluate the parasitic terms, the measured ZTs with systematically varied sample geometries and the lead wire types are fitted to the expanded relation. A huge discrepancy (∼28%) of the measured ZTs depending on the measurement configuration is observed. We are able to separately evaluate those parasitic terms. This work will help to evaluate the intrinsic thermoelectric property with Harman method by eliminating ambiguities coming from extrinsic effects.
Shadowing effects on multi-step Langmuir probe array on HL-2A tokamak

NASA Astrophysics Data System (ADS)

Ke, R.; Xu, M.; Nie, L.; Gao, Z.; Wu, Y.; Yuan, B.; Chen, J.; Song, X.; Yan, L.; Duan, X.

2018-05-01

Multi-step Langmuir probe arrays have been designed and installed on the HL-2A tokamak [1]–[2] to study the turbulent transport in the edge plasma, especially for the measurement of poloidal momentum flux, Reynolds stress Rs. However, except the probe tips on the top step, all other tips on lower steps are shadowed by graphite skeleton. It is necessary to estimate the shadowing effects on equilibrium and fluctuation measurement. In this paper, comparison of shadowed tips to unshadowed ones is presented. The results show that shadowing can strongly reduce the ion and electron effective collection area. However, its effect is negligible for the turbulence intensity and coherence measurement, confirming that the multi-step LP array is proper for the turbulent transport measurement.
Measuring and filtering reactive inhibition is essential for assessing serial decision making and learning.

PubMed

Török, Balázs; Janacsek, Karolina; Nagy, Dávid G; Orbán, Gergő; Nemeth, Dezso

2017-04-01

Learning complex structures from stimuli requires extended exposure and often repeated observation of the same stimuli. Learning induces stimulus-dependent changes in specific performance measures. The same performance measures, however, can also be affected by processes that arise because of extended training (e.g., fatigue) but are otherwise independent from learning. Thus, a thorough assessment of the properties of learning can only be achieved by identifying and accounting for the effects of such processes. Reactive inhibition is a process that modulates behavioral performance measures on a wide range of time scales and often has opposite effects than learning. Here we develop a tool to disentangle the effects of reactive inhibition from learning in the context of an implicit learning task, the alternating serial reaction time (ASRT) task. Our method highlights that the magnitude of the effect of reactive inhibition on measured performance is larger than that of the acquisition of statistical structure from stimuli. We show that the effect of reactive inhibition can be identified not only in population measures but also at the level of performance of individuals, revealing varying degrees of contribution of reactive inhibition. Finally, we demonstrate that a higher proportion of behavioral variance can be explained by learning once the effects of reactive inhibition are eliminated. These results demonstrate that reactive inhibition has a fundamental effect on the behavioral performance that can be identified in individual participants and can be separated from other cognitive processes like learning. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
[Evaluation of the effect of varicella outbreak control measures through a discrete time delay SEIR model].

PubMed

Pan, Jin-ren; Huang, Zheng-qiang; Chen, Kun

2012-04-01

forecast the epidemic trend and to evaluate the effect of outbreak control measures by investigation of a varicella outbreak event with a discrete time delay SEIR model. A discrete time delay model was formulated by discretization method based on a continuous SEIR model with the consideration of the time delay effect on latent period and communicable period. The epidemic trend forecast was carried out based on the number of expected cases. The theoretical effect evaluation was assessed by comparing the results from different emergency control measures. Without any control measures, the theoretical attack rate was 30.16% (504/1671). The course of the epidemic lasted for 4 months and the peak epidemic time was 78 days after the onset of the first case. 'Generation' phenomenon had been observed in the course of the epidemic with the interval of two weeks. The actual number of cases was decreased by 89.48% (451/504) compared with the number of expected cases under no control measure scenario. With the rigorous quarantine measure for all cases on their onset day, when the measure was conducted on 0, 14, 28, 42 days after the onset of the first case, the total numbers of expected cases were 22, 59, 127 and 220 respectively. With the quarantine measure conducted on 14 days after the onset of the first case, when the proportion of quarantine was 30%, 50%, 70%, 90%, the total number of expected cases were 485, 457, 386 and 169, respectively. With the emergent vaccination for all persons, when the measure was conducted on 0, 14, 28, 42 days after the onset of the first case, the total numbers of expected cases were 7, 26, 81 and 202 respectively. With the emergent vaccination conducted on 14 days after the onset of the first case, when the immunization coverage rate was 30%, 50%, 70%, 90%, the total numbers of expected cases were 354, 246, 127 and 40, respectively. The number of expected cases can be regarded as the reference to evaluate the effect of control measures. The simulation results suggest that it will get more benefits to conduct control measures earlier in varicella outbreak events, and the effect of emergent vaccination is better than that of quarantine measure under the same conditions.
Long-Term Pavement Performance Program: Pavement Performance Measures and Forecasting and the Effects of Maintenance and Rehabilitation Strategy on Treatment Effectiveness [Tech Brief

DOT National Transportation Integrated Search

2016-08-01

This document is a technical summary of the Federal Highway Administration Long-Term Pavement Performance Program report, Pavement Performance Measures and Forecasting and the Effects of Maintenance and Rehabilitation Strategy on Treatment Effectiven...
Cost Effectiveness in Evaluation Technical Assistance: Different Aspects of Measuring Cost and Outcomes.

ERIC Educational Resources Information Center

Estes, Gary D.

The paper focuses on the Title I Evaluation Technical Assistance Centers to illustrate issues of measuring costs and deciding on outcome criteria before promoting "cost-effective" approaches. Effects are illustrated for varying resource allocations among personnel, travel, materials, and phone costs as a function of emphasizing…
Monitoring the Effectiveness of Measures to Contain the Primary Sources of Mercury Pollution on the Site of a Former Chlor-Akali Plant in Kazakhstan

EPA Science Inventory

An extensive sampling campaign was conducted in 2005-2007 to monitor the effectiveness of remedial measures to contain mercury pollution at the site of a former mercury cell chlor-alkali plant in Pavlodar, Kazakhstan. Containment measures consisted of cutoff walls and capping of ...
FMCSA safety program effectiveness measurement : carrier intervention effectiveness model, version 1.0, summary report for fiscal years 2009, 2010, 2011.

DOT National Transportation Integrated Search

2015-01-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the John A. Volpe National : Transportation Systems Center (Volpe), has developed a quantitative model to measure the effectiveness of motor : carrier interventions in terms...

Imaging Effects of Neurotrophic Factor Genes on Brain Plasticity and Repair in Multiple Sclerosis

DTIC Science & Technology

2011-07-01

focal and diffuse effects in brain (including cortical thickness and subcortical volume measures, lesion volumetry , and voxel-based morphometry and...to both focal and diffuse effects in gray and white matter, including cortical thickness and subcortical volume measures, lesion volumetry , and
Dosimetric measurements of Onyx embolization material for stereotactic radiosurgery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Donald A.; Balter, James M.; Chaudhary, Neeraj

2012-11-15

Purpose: Arteriovenous malformations are often treated with a combination of embolization and stereotactic radiosurgery. Concern has been expressed in the past regarding the dosimetric properties of materials used in embolization and the effects that the introduction of these materials into the brain may have on the quality of the radiosurgery plan. To quantify these effects, the authors have taken large volumes of Onyx 34 and Onyx 18 (ethylene-vinyl alcohol copolymer doped with tantalum) and measured the attenuation and interface effects of these embolization materials. Methods: The manufacturer provided large cured volumes ({approx}28 cc) of both Onyx materials. These samples weremore » 8.5 cm in diameter with a nominal thickness of 5 mm. The samples were placed on a block tray above a stack of solid water with an Attix chamber at a depth of 5 cm within the stack. The Attix chamber was used to measure the attenuation. These measurements were made for both 6 and 16 MV beams. Placing the sample directly on the solid water stack and varying the thickness of solid water between the sample and the Attix chamber measured the interface effects. The computed tomography (CT) numbers for bulk material were measured in a phantom using a wide bore CT scanner. Results: The transmission through the Onyx materials relative to solid water was approximately 98% and 97% for 16 and 6 MV beams, respectively. The interface effect shows an enhancement of approximately 2% and 1% downstream for 16 and 6 MV beams. CT numbers of approximately 2600-3000 were measured for both materials, which corresponded to an apparent relative electron density (RED) {rho}{sub e}{sup w} to water of approximately 2.7-2.9 if calculated from the commissioning data of the CT scanner. Conclusions: We performed direct measurements of attenuation and interface effects of Onyx 34 and Onyx 18 embolization materials with large samples. The introduction of embolization materials affects the dose distribution of a MV therapeutic beam, but should be of negligible consequence for effective thicknesses of less than 8 mm. The measured interface effects are also small, particularly at 6 MV. Large areas of high-density artifacts and low-density artifacts can cause errors in dose calculations and need to be identified and resolved during planning.« less
Exploring the Effectiveness of a Measurement Error Tutorial in Helping Teachers Understand Score Report Results

ERIC Educational Resources Information Center

Zapata-Rivera, Diego; Zwick, Rebecca; Vezzu, Margaret

2016-01-01

The goal of this study was to explore the effectiveness of a short web-based tutorial in helping teachers to better understand the portrayal of measurement error in test score reports. The short video tutorial included both verbal and graphical representations of measurement error. Results showed a significant difference in comprehension scores…
Optical properties of tissue, experimental results

NASA Astrophysics Data System (ADS)

Beek, Johan F.

1993-08-01

The effective attenuation coefficient of piglet lung was measured in vitro at 632.8 nm. Interstial fibres with isotropic tips were used to measure the fluence rate as a function of the distance from an isotropic light source. In vitro measurements at 632.8 nm on a lung that was insufflated with oxygen from 50 to 150 ml showed that the effective attenuation coefficient decreases as a function of the volume of air in the lung (at 50 ml /Jeff = 0.297 + 0.011 mnf1, at 100 ml lice 0.150 ± 0.007 mm-1, and at 150 ml /Jeff= 0.1136 + 0.015 mm-1). A single in vitro measurement at 790 nm at an insufflated lung volume of 100 ml gave a comparable result (ii ie = 0.175 + 0.004 mm-1). A ff decrease in effective attenuation coefficient with an ncrease in lung volume was explained by Mie-theory. The effective attenuation coefficient, calculated with 11, and g from Mie-theory, showed a deviation < 22% from the measured in vitro values.
Cognitive Modification and Systematic Desensitization with Test Anxious High School Students.

ERIC Educational Resources Information Center

Leal, Lois L.; And Others

1981-01-01

Compares the relative effectiveness of cognitive modification and systematic desensitization with test anxious high school students (N=30). The systematic desensitization treatment appeared to be significantly more effective on the performance measure while cognitive modification was more effective on one of the self-report measures. (Author/JAC)
Speech Effort Measurement and Stuttering: Investigating the Chorus Reading Effect

ERIC Educational Resources Information Center

Ingham, Roger J.; Warner, Allison; Byrd, Anne; Cotton, John

2006-01-01

Purpose: The purpose of this study was to investigate chorus reading's (CR's) effect on speech effort during oral reading by adult stuttering speakers and control participants. The effect of a speech effort measurement highlighting strategy was also investigated. Method: Twelve persistent stuttering (PS) adults and 12 normally fluent control…
Investigating the Effects of the Interaction Intensity in a Weak Measurement.

PubMed

Piacentini, Fabrizio; Avella, Alessio; Gramegna, Marco; Lussana, Rudi; Villa, Federica; Tosi, Alberto; Brida, Giorgio; Degiovanni, Ivo Pietro; Genovese, Marco

2018-05-03

Measurements are crucial in quantum mechanics, for fundamental research as well as for applicative fields like quantum metrology, quantum-enhanced measurements and other quantum technologies. In the recent years, weak-interaction-based protocols like Weak Measurements and Protective Measurements have been experimentally realized, showing peculiar features leading to surprising advantages in several different applications. In this work we analyze the validity range for such measurement protocols, that is, how the interaction strength affects the weak value extraction, by measuring different polarization weak values on heralded single photons. We show that, even in the weak interaction regime, the coupling intensity limits the range of weak values achievable, setting a threshold on the signal amplification effect exploited in many weak measurement based experiments.
Are Intelligence Tests Measurement Invariant over Time? Investigating the Nature of the Flynn Effect

ERIC Educational Resources Information Center

Wicherts, Jelte M.; Dolan, Conor V.; Hessen, David J.; Oosterveld, Paul; van Baal, G. Caroline M.; Boomsma, Dorret I.; Span, Mark M.

2004-01-01

The gains of scores on standardized intelligence tests (i.e., Flynn effect) have been the subject of extensive debate concerning their nature, causes, and implications. The aim of the present study is to investigate whether five intelligence tests are measurement invariant with respect to cohort. Measurement invariance implies that gains over the…
The Influence of Age and Skull Conductivity on Surface and Subdermal Bipolar EEG Leads

PubMed Central

Wendel, Katrina; Väisänen, Juho; Seemann, Gunnar; Hyttinen, Jari; Malmivuo, Jaakko

2010-01-01

Bioelectric source measurements are influenced by the measurement location as well as the conductive properties of the tissues. Volume conductor effects such as the poorly conducting bones or the moderately conducting skin are known to affect the measurement precision and accuracy of the surface electroencephalography (EEG) measurements. This paper investigates the influence of age via skull conductivity upon surface and subdermal bipolar EEG measurement sensitivity conducted on two realistic head models from the Visible Human Project. Subdermal electrodes (a.k.a. subcutaneous electrodes) are implanted on the skull beneath the skin, fat, and muscles. We studied the effect of age upon these two electrode types according to the scalp-to-skull conductivity ratios of 5, 8, 15, and 30 : 1. The effects on the measurement sensitivity were studied by means of the half-sensitivity volume (HSV) and the region of interest sensitivity ratio (ROISR). The results indicate that the subdermal implantation notably enhances the precision and accuracy of EEG measurements by a factor of eight compared to the scalp surface measurements. In summary, the evidence indicates that both surface and subdermal EEG measurements benefit better recordings in terms of precision and accuracy on younger patients. PMID:20130812
Measurement method for determining the magnetic hysteresis effects of reluctance actuators by evaluation of the force and flux variation.

PubMed

Vrijsen, N H; Jansen, J W; Compter, J C; Lomonova, E A

2013-07-01

A measurement method is presented which identifies the magnetic hysteresis effects present in the force of linear reluctance actuators. The measurement method is applied to determine the magnetic hysteresis in the force of an E-core reluctance actuator, with and without pre-biasing permanent magnet. The force measurements are conducted with a piezoelectric load cell (Kistler type 9272). This high-bandwidth force measurement instrument is identified in the frequency domain using a voice-coil actuator that has negligible magnetic hysteresis and eddy currents. Specifically, the phase delay between the current and force of the voice-coil actuator is used for the calibration of the measurement instrument. This phase delay is also obtained by evaluation of the measured force and flux variation in the E-core actuator, both with and without permanent magnet on the middle tooth. The measured magnetic flux variation is used to distinguish the phase delay due to magnetic hysteresis from the measured phase delay between the current and the force of the E-core actuator. Finally, an open loop steady-state ac model is presented that predicts the magnetic hysteresis effects in the force of the E-core actuator.
Relative Risk Reduction as a Metric to Standardize Effect Size for Public Heath Interventions for Translational Research: Methods and Applications

PubMed Central

Mirzazadeh, A; Malekinejad, M; Kahn, JG

2018-01-01

Objective Heterogeneity of effect measures in intervention studies undermines the use of evidence to inform policy. Our objective was to develop a comprehensive algorithm to convert all types of effect measures to one standard metric, relative risk reduction (RRR). Study Design and Setting This work was conducted to facilitate synthesis of published intervention effects for our epidemic modeling of the health impact of HIV Testing and Counseling (HTC). We designed and implemented an algorithm to transform varied effect measures to RRR, representing the proportionate reduction in undesirable outcomes. Results Our extraction of 55 HTC studies identified 473 effect measures representing unique combinations of intervention-outcome-population characteristics, using five outcome metrics: pre-post proportion (70.6%), odds ratio (14.0%), mean difference (10.2%), risk ratio (4.4%), and RRR (0.9%). Outcomes were expressed as both desirable (29.5%, e.g., consistent condom use) and undesirable (70.5% e.g., inconsistent condom use). Using four examples, we demonstrate our algorithm for converting varied effect measures to RRR, and provide the conceptual basis for advantages of RRR over other metrics. Conclusion Our review of the literature suggests that RRR, an easily understood and useful metric to convey risk reduction associated with an intervention, is underutilized by original and review studies. PMID:25726522
Agri-Environmental Policy Measures in Israel: The Potential of Using Market-Oriented Instruments

NASA Astrophysics Data System (ADS)

Amdur, Liron; Bertke, Elke; Freese, Jan; Marggraf, Rainer

2011-05-01

This paper examines the possibilities of developing agri-environmental policy measures in Israel, focusing on market-oriented instruments. A conceptual framework for developing agri-environmental policy measures is presented, first in very broad lines (mandatory regulations, economic instruments and advisory measures) and subsequently focusing on economic instruments, and specifically, on market-oriented ones. Two criteria of choice between the measures are suggested: their contribution to improving the effectiveness of the policy; and the feasibility of their implementation. This is the framework used for analyzing agri-environmental measures in Israel. Israel currently implements a mix of mandatory regulations, economic instruments and advisory measures to promote the agri-environment. The use of additional economic instruments may improve the effectiveness of the policy. When comparing the effectiveness of various economic measures, we found that the feasibility of implementation of market-oriented instruments is greater, due to the Israeli public's preference for strengthening market orientation in the agricultural sector. Four market-oriented instruments were practiced in a pilot project conducted in an Israeli rural area. We found that in this case study, the institutional feasibility and acceptance by stakeholders were the major parameters influencing the implementation of the market-oriented instruments, whereas the instruments' contribution to enhancing the ecological or economic effectiveness were hardly considered by the stakeholders as arguments in favor of their use.
Agri-environmental policy measures in Israel: the potential of using market-oriented instruments.

PubMed

Amdur, Liron; Bertke, Elke; Freese, Jan; Marggraf, Rainer

2011-05-01

This paper examines the possibilities of developing agri-environmental policy measures in Israel, focusing on market-oriented instruments. A conceptual framework for developing agri-environmental policy measures is presented, first in very broad lines (mandatory regulations, economic instruments and advisory measures) and subsequently focusing on economic instruments, and specifically, on market-oriented ones. Two criteria of choice between the measures are suggested: their contribution to improving the effectiveness of the policy; and the feasibility of their implementation. This is the framework used for analyzing agri-environmental measures in Israel. Israel currently implements a mix of mandatory regulations, economic instruments and advisory measures to promote the agri-environment. The use of additional economic instruments may improve the effectiveness of the policy. When comparing the effectiveness of various economic measures, we found that the feasibility of implementation of market-oriented instruments is greater, due to the Israeli public's preference for strengthening market orientation in the agricultural sector. Four market-oriented instruments were practiced in a pilot project conducted in an Israeli rural area. We found that in this case study, the institutional feasibility and acceptance by stakeholders were the major parameters influencing the implementation of the market-oriented instruments, whereas the instruments' contribution to enhancing the ecological or economic effectiveness were hardly considered by the stakeholders as arguments in favor of their use.
Measurements of Strontium Levels in Human Bone In Vivo Using Portable X-ray Fluorescence (XRF).

PubMed

Specht, Aaron J; Mostafaei, Farshad; Lin, Yanfen; Xu, Jian; Nie, Linda H

2017-08-01

Measurement of bone strontium (Sr) is vital to determining the effectiveness of Sr supplementation, which is commonly used for the treatment of osteoporosis. Previous technology uses radioisotope sources and bulky equipment to measure bone Sr. This study demonstrates the effectiveness of portable X-ray fluorescence (XRF) for bone Sr measurement and validates it using data from a population of 238 children. We identified correlations between bone Sr and age in our participants.
Financial Stress, Parenting Quality, and the Moderating Effect of Co-Parenting Alliance within the Marital Dissolution Population

ERIC Educational Resources Information Center

Mao, Dung Minh

2017-01-01

In this study, the relationship between the perception of financial stress (measured by income inadequacy), parenting quality (measured by positive parenting, consistent discipline, and good supervision), and the moderating effect that cooperative co-parenting (measured by co-parenting alliance) were investigated within a sample of parents who…
Childhood Cognitive Ability, Education, and Personality Traits Predict Attainment in Adult Occupational Prestige over 17 Years

ERIC Educational Resources Information Center

Cheng, Helen; Furnham, Adrian

2012-01-01

This study explored a longitudinal data set of nearly 5000 adults examining the effects of childhood cognitive ability (measured at age 11), parental social class (measured at birth), and personality on current occupational prestige (all measured at age 50), taking account the effects of education and the previous occupational levels (both…
Evaluating the use of gas discharge visualization to measure massage therapy outcomes

PubMed Central

Haun, Jolie; Patel, Nitin; Schwartz, Gary; Ritenbaugh, Cheryl

2017-01-01

Background The purpose of this study was to evaluate the short-term effects of massage therapy using gas discharge visualization (GDV), a computerized biophysical electrophoton capture (EPC), in tandem with traditional self-report measures to evaluate the use of GDV measurement to assess the bioenergetic whole-person effects of massage therapy. Methods This study used a single treatment group, pre–post-repeated measures design with a sample of 23 healthy adults. This study utilized a single 50-min full-body relaxation massage with participants. GDV measurement method, an EPC, and traditional paper-based measures evaluating pain, stress, muscle tension, and well-being were used to assess intervention outcomes. Results Significant differences were found between pre- and post-measures of well-being, pain, stress, muscle tension, and GDV parameters. Pearson correlations indicate the GDV measure is correlated with pain and stress, variables that impact the whole person. Conclusions This study demonstrates that GDV parameters may be used to indicate significant bioenergetic change from pre- to post-massage. Findings warrant further investigation with a larger diverse sample size and control group to further explore GDV as a measure of whole-person bioenergetic effects associated with massage. PMID:26087069
E.M.I Effects of Cathodic Protection on Electromagnetic Flowmeters

PubMed Central

Gundogdu, Serdar; Sahin, Ozge

2007-01-01

Electromagnetic flowmeters are used to measure the speed of water flow in water distribution systems. Corrosion problem in metal pipelines can be solved by cathodic protection methods. This paper presents a research on corruptive effects of the cathodic protection system on electromagnetic flowmeter depending on its measuring principle. Experimental measurements are realized on the water distribution pipelines of the Izmir Municipality, Department of Water and Drainage Administration (IZSU) in Turkey and measurement results are given. Experimental results proved that the values measured by the electromagnetic flowmeter (EMF) are affected by cathodic protection system current. Comments on the measurement results are made and precautions to be taken are proposed.
How Can A Marine Aviation Logistics Squadron Be Measured For Effectiveness

DTIC Science & Technology

2016-12-01

accounting measures inappropriately applied to supply chain manamagement. This is evidenced by “a consensus in DOD [that] considers the metrics...filled will degrade the supply effectiveness measure . If that requisition takes 10 or 40 days to fill, however, is not taken into account . These two... measurements need to first be T/M/S specific within each MALS. This accounts for the systematic differences between different fleets of aircraft
How reliable are the effects of self-control training?: A re-examination using self-report and physical measures

PubMed Central

2017-01-01

In light of recent challenges to the strength model of self-control, our study re-examines the effects of self-control training on established physical and self-report measures of self-control. We also examined whether beliefs about the malleability of self-control qualify any training effects. Participants in the training condition were assigned to increase use of their non-dominant hand for two weeks, and did comply mainly if they held high-malleability beliefs; yet, compared to a control condition, the physical measure of self-control did not improve. This was also evident in a secondary objective measure of self-control, a Stroop task, as well as in self-reported self-control. The discussion focuses on the lack of replication of training effects on self-control. PMID:28594933

Data-driven regions of interest for longitudinal change in frontotemporal lobar degeneration.

PubMed

Pankov, Aleksandr; Binney, Richard J; Staffaroni, Adam M; Kornak, John; Attygalle, Suneth; Schuff, Norbert; Weiner, Michael W; Kramer, Joel H; Dickerson, Bradford C; Miller, Bruce L; Rosen, Howard J

2016-01-01

Current research is investigating the potential utility of longitudinal measurement of brain structure as a marker of drug effect in clinical trials for neurodegenerative disease. Recent studies in Alzheimer's disease (AD) have shown that measurement of change in empirically derived regions of interest (ROIs) allows more reliable measurement of change over time compared with regions chosen a-priori based on known effects of AD on brain anatomy. Frontotemporal lobar degeneration (FTLD) is a devastating neurodegenerative disorder for which there are no approved treatments. The goal of this study was to identify an empirical ROI that maximizes the effect size for the annual rate of brain atrophy in FTLD compared with healthy age matched controls, and to estimate the effect size and associated power estimates for a theoretical study that would use change within this ROI as an outcome measure. Eighty six patients with FTLD were studied, including 43 who were imaged twice at 1.5 T and 43 at 3 T, along with 105 controls (37 imaged at 1.5 T and 67 at 3 T). Empirically-derived maps of change were generated separately for each field strength and included the bilateral insula, dorsolateral, medial and orbital frontal, basal ganglia and lateral and inferior temporal regions. The extent of regions included in the 3 T map was larger than that in the 1.5 T map. At both field strengths, the effect sizes for imaging were larger than for any clinical measures. At 3 T, the effect size for longitudinal change measured within the empirically derived ROI was larger than the effect sizes derived from frontal lobe, temporal lobe or whole brain ROIs. The effect size derived from the data-driven 1.5 T map was smaller than at 3 T, and was not larger than the effect size derived from a-priori ROIs. It was estimated that measurement of longitudinal change using 1.5 T MR systems requires approximately a 3-fold increase in sample size to obtain effect sizes equivalent to those seen at 3 T. While the results should be confirmed in additional datasets, these results indicate that empirically derived ROIs can reduce the number of subjects needed for a longitudinal study of drug effects in FTLD compared with a-priori ROIs. Field strength may have a significant impact on the utility of imaging for measuring longitudinal change.
Linking nursing unit's culture to organizational effectiveness: a measurement tool.

PubMed

Casida, Jesus

2008-01-01

Organizational culture consists of the deep underlying assumptions, beliefs, and values that are shared by members of the organization and typically operate unconsciously. The four organizational culture traits of the Denison Organizational Culture Model (DOCM) are characteristics of organizational effectiveness, which include adaptability, involvement, consistency, and mission. Effective organizations demonstrate high levels of the four cultural traits which reflect their ability to balance the dynamic tension between the need for stability and the need for flexibility within the organization. The Denison Organizational Culture Survey (DOCS) is a measurement tool that was founded on the theoretical framework of the DOCM, and in the field of business, is one of the most commonly used tools for measuring organizational culture. The DOCS offers a promising approach to operationalizing and measuring the link between organizational culture and organizational effectiveness in the context of nursing units.
Distributed collaborative team effectiveness: measurement and process improvement

NASA Technical Reports Server (NTRS)

Wheeler, R.; Hihn, J.; Wilkinson, B.

2002-01-01

This paper describes a measurement methodology developed for assessing the readiness, and identifying opportunities for improving the effectiveness, of distributed collaborative design teams preparing to conduct a coccurent design session.
Reflexology has no immediate haemodynamic effect in patients with chronic heart failure: a double blind randomised controlled trial.

PubMed

Jones, Jenny; Thomson, Patricia; Lauder, William; Howie, Kate; Leslie, Stephen J

2013-08-01

This study measured the effects of reflexology in 12 reflexology-naive patients with chronic heart failure in a placebo-controlled, double blind randomised controlled study design. Outcomes included 'beat-to-beat' non-invasive continuous measurement of cardiovascular parameters and measurement of state of anxiety and pain/discomfort. There were no changes in any of the haemodynamic parameters measured (all p > 0.05). Perceived state of anxiety was significantly reduced post treatment in the control group only (p = 0.03). Reflexology applied to the feet of patients with chronic heart failure appears to have no immediate haemodynamic effects. While any long term treatment effect is uncertain, it would appear that reflexology is safe for use in this patient group. Copyright © 2013 Elsevier Ltd. All rights reserved.
The electrical properties of 60 keV zinc ions implanted into semi-insulating gallium arsenide

NASA Technical Reports Server (NTRS)

Littlejohn, M. A.; Anikara, R.

1972-01-01

The electrical behavior of zinc ions implanted into chromium-doped semiinsulating gallium arsenide was investigated by measurements of the sheet resistivity and Hall effect. Room temperature implantations were performed using fluence values from 10 to the 12th to 10 to the 15th power/sq cm at 60 keV. The samples were annealed for 30 minutes in a nitrogen atmosphere up to 800 C in steps of 200 C and the effect of this annealing on the Hall effect and sheet resistivity was studied at room temperature using the Van der Pauw technique. The temperature dependence of sheet resistivity and mobility was measured from liquid nitrogen temperature to room temperature. Finally, a measurement of the implanted profile was obtained using a layer removal technique combined with the Hall effect and sheet resistivity measurements.
12 CFR Appendix B to Part 741 - Guidance for an Interest Rate Risk Policy and an Effective Program

Code of Federal Regulations, 2013 CFR

2013-01-01

... Measurement Methods C. Components of IRR Measurement Methods V. Internal Controls VI. Decision-Making Informed... effective IRR management program identifies, measures, monitors, and controls IRR and is central to safe and... critical to the control of IRR exposure. All FICUs required to have an IRR policy and program should...
12 CFR Appendix B to Part 741 - Guidance for an Interest Rate Risk Policy and an Effective Program

Code of Federal Regulations, 2014 CFR

2014-01-01

... Measurement Methods C. Components of IRR Measurement Methods V. Internal Controls VI. Decision-Making Informed... effective IRR management program identifies, measures, monitors, and controls IRR and is central to safe and... critical to the control of IRR exposure. All FICUs required to have an IRR policy and program should...
Wechsler Individual Achievement Test-Third Edition Oral Language and Reading Measures Effects on Reading Comprehension in a Referred Sample

ERIC Educational Resources Information Center

Parkin, Jason R.

2018-01-01

Oral language and word reading skills have important effects on reading comprehension. The Wechsler Individual Achievement Test-Third Edition (WIAT-III) measures both skill sets, but little is known about their specific effects on reading comprehension within this battery. Path analysis was used to evaluate the collective effects of reading and…
Refraction error correction for deformation measurement by digital image correlation at elevated temperature

NASA Astrophysics Data System (ADS)

Su, Yunquan; Yao, Xuefeng; Wang, Shen; Ma, Yinji

2017-03-01

An effective correction model is proposed to eliminate the refraction error effect caused by an optical window of a furnace in digital image correlation (DIC) deformation measurement under high-temperature environment. First, a theoretical correction model with the corresponding error correction factor is established to eliminate the refraction error induced by double-deck optical glass in DIC deformation measurement. Second, a high-temperature DIC experiment using a chromium-nickel austenite stainless steel specimen is performed to verify the effectiveness of the correction model by the correlation calculation results under two different conditions (with and without the optical glass). Finally, both the full-field and the divisional displacement results with refraction influence are corrected by the theoretical model and then compared to the displacement results extracted from the images without refraction influence. The experimental results demonstrate that the proposed theoretical correction model can effectively improve the measurement accuracy of DIC method by decreasing the refraction errors from measured full-field displacements under high-temperature environment.
Comparing the responsiveness of functional outcome assessment measures for trauma registries.

PubMed

Williamson, Owen D; Gabbe, Belinda J; Sutherland, Ann M; Wolfe, Rory; Forbes, Andrew B; Cameron, Peter A

2011-07-01

Measuring long-term disability and functional outcomes after major trauma is not standardized across trauma registries. An ideal measure would be responsive to change but not have significant ceiling effects. The aim of this study was to compare the responsiveness of the Glasgow Outcome Scale (GOS), GOS-Extended (GOSE), Functional Independence Measure (FIM), and modified FIM in major trauma patients, with and without significant head injuries. Patients admitted to two adult Level I trauma centers in Victoria, Australia, who survived to discharge from hospital, were aged 15 years to 80 years with a blunt mechanism of injury, and had an estimated Injury Severity Score >15 on admission, were recruited for this prospective study. The instruments were administered at baseline (hospital discharge) and by telephone interview 6 months after injury. Measures of responsiveness, including effect sizes, were calculated. Bootstrapping techniques, and floor and ceiling effects, were used to compare the measures. Two hundred forty-three patients participated, of which 234 patients (96%) completed the study. The GOSE and GOS were the most responsive instruments in this major trauma population with effect sizes of 5.3 and 4.4, respectively. The GOSE had the lowest ceiling effect (17%). The GOSE was the instrument with greatest responsiveness and the lowest ceiling effect in a major trauma population with and without significant head injuries and is recommended for use by trauma registries for monitoring functional outcomes and benchmarking care. The results of this study do not support the use of the modified FIM for this purpose.
Responsiveness of outcome measures for upper limb prosthetic rehabilitation.

PubMed

Resnik, Linda; Borgia, Matthew

2016-02-01

There is limited research on responsiveness of prosthetic rehabilitation outcome measures. To examine responsiveness of the Box and Block test, Jebsen-Taylor Hand Function tests, Upper Extremity Functional Scale, University of New Brunswick skill and spontaneity tests, Activity Measure for Upper Limb Amputation, and the Patient-Specific Functional Scale. This was a quasi-experimental study with repeated measurements in a convenience sample of upper limb amputees. Measures were collected before, during, and after training with the DEKA Arm. Largest effect sizes were observed for Patient-Specific Functional Scale (effect size: 1.59, confidence interval: 1.00, 2.14), Activity Measure for Upper Limb Amputation (effect size: 1.33, confidence interval: 0.73, 1.90), and University of New Brunswick skill test (effect size: 1.18, confidence interval: 0.61, 1.73). Other measures that were responsive to change were Box and Block test, Jebsen-Taylor Hand Function light and heavy can tests, and University of New Brunswick spontaneity test. Responsiveness and pattern of responsiveness varied by prosthetic level. The Box and Block test, Jebsen-Taylor Hand Function light and heavy can tests, University of New Brunswick skill and spontaneity tests, Activities Measure for Upper Limb Amputation, and the Patient-Specific Functional Scale were responsive to change during prosthetic training. These findings have implications for choice of measures for research and practice and inform clinicians about the amount of training necessary to maximize outcomes with the DEKA Arm. Findings on responsiveness of outcome measures have implications for the choice of measures for clinical trials and practice. Findings regarding the responsiveness to change over the course of training can inform clinicians about the amount of training that may be necessary to maximize specific outcomes with the DEKA Arm. © The International Society for Prosthetics and Orthotics 2014.
Measurement of the dipole in the cross-correlation function of galaxies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaztanaga, Enrique; Bonvin, Camille; Hui, Lam, E-mail: gazta@ice.cat, E-mail: camille.bonvin@unige.ch, E-mail: lhui@astro.columbia.edu

It is usually assumed that in the linear regime the two-point correlation function of galaxies contains only a monopole, quadrupole and hexadecapole. Looking at cross-correlations between different populations of galaxies, this turns out not to be the case. In particular, the cross-correlations between a bright and a faint population of galaxies contain also a dipole. In this paper we present the first attempt to measure this dipole. We discuss the four types of effects that contribute to the dipole: relativistic distortions, evolution effect, wide-angle effect and large-angle effect. We show that the first three contributions are intrinsic anti-symmetric contributions thatmore » do not depend on the choice of angle used to measure the dipole. On the other hand the large-angle effect appears only if the angle chosen to extract the dipole breaks the symmetry of the problem. We show that the relativistic distortions, the evolution effect and the wide-angle effect are too small to be detected in the LOWz and CMASS sample of the BOSS survey. On the other hand with a specific combination of angles we are able to measure the large-angle effect with high significance. We emphasise that this large-angle dipole does not contain new physical information, since it is just a geometrical combination of the monopole and the quadrupole. However this measurement, which is in excellent agreement with theoretical predictions, validates our method for extracting the dipole from the two-point correlation function and it opens the way to the detection of relativistic effects in future surveys like e.g. DESI.« less
Treatment effect expressed as the novel Delay of Event measure is associated with high willingness to initiate preventive treatment - A randomized survey experiment comparing effect measures.

PubMed

Berglund, Erik; Westerling, Ragnar; Sundström, Johan; Lytsy, Per

2016-12-01

This study aimed to investigate patients' willingness to initiate a preventive treatment and compared two established effect measures to the newly developed Delay of Events (DoE) measure that expresses treatment effect as a gain in event-free time. In this cross-sectional, randomized survey experiment in the general Swedish population,1079 respondents (response rate 60.9%) were asked to consider a preventive cardiovascular treatment. Respondents were randomly allocated to one of three effect descriptions: DoE, relative risk reduction (RRR), or absolute risk reduction (ARR). Univariate and multivariate analyses were performed investigating willingness to initiate treatment, views on treatment benefit, motivation and importance to adhere and willingness to pay for treatment. Eighty-one percent were willing to take the medication when the effect was described as DoE, 83.0% when it was described as RRR and 62.8% when it was described as ARR. DoE and RRR was further associated with positive views on treatment benefit, motivation, importance to adhere and WTP. Presenting treatment effect as DoE or RRR was associated with a high willingness to initiate treatment. An approach based on the novel time-based measure DoE may be of value in clinical communication and shared decision making. Copyright © 2016 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.
Probe pressure effects on human skin diffuse reflectance and fluorescence spectroscopy measurements

PubMed Central

Lim, Liang; Nichols, Brandon; Rajaram, Narasimhan; Tunnell, James W.

2011-01-01

Diffuse reflectance and fluorescence spectroscopy are popular research techniques for noninvasive disease diagnostics. Most systems include an optical fiber probe that transmits and collects optical spectra in contact with the suspected lesion. The purpose of this study is to investigate probe pressure effects on human skin spectroscopic measurements. We conduct an in-vivo experiment on human skin tissue to study the short-term (<2 s) and long-term (>30 s) effects of probe pressure on diffuse reflectance and fluorescence measurements. Short-term light probe pressure (P0 < 9 mN∕mm2) effects are within 0 ± 10% on all physiological properties extracted from diffuse reflectance and fluorescence measurements, and less than 0 ± 5% for diagnostically significant physiological properties. Absorption decreases with site-specific variations due to blood being compressed out of the sampled volume. Reduced scattering coefficient variation is site specific. Intrinsic fluorescence shows a large standard error, although no specific pressure-related trend is observed. Differences in tissue structure and morphology contribute to site-specific probe pressure effects. Therefore, the effects of pressure can be minimized when the pressure is small and applied for a short amount of time; however, long-term and large pressures induce significant distortions in measured spectra. PMID:21280899
Effects of consecutive wideband tympanometry trials on energy absorbance measures of the middle ear.

PubMed

Burdiek, Laina M; Sun, Xiao-Ming

2014-10-01

Wideband acoustic immittance (WAI) is a new technique for assessing middle ear transfer function. It includes energy absorbance (EA) measures and can be acquired with the ear canal pressure varied, known as wideband tympanometry (WBTymp). The authors of this study aimed to investigate effects of consecutive WBTymp testing on EA. Data were collected in 29 young adults with normal hearing and middle ear status. Before and after 8 successive WBTymp runs, EA was also measured at ambient pressure. Subsequently, two 226-Hz tympanometry tests were performed. EA systematically changed over the WBTymp trials in a frequency-specific manner: increase for low frequencies (below 1.5 kHz) and decrease for high frequencies (around 2 kHz and 5 to 6 kHz). The changes, although small, were significant. Much larger EA changes were measured at ambient pressure. The test-retest difference of 226-Hz tympanogram measures was much smaller than previously reported. Consecutive tympanometry testing alters EA measures of the middle ear. This phenomenon could be mainly attributed to change in stiffness at the eardrum, called tympanometric preconditioning. This also has effects on baseline WBTymp outcomes. This effect should be taken into account as a procedural variable in both research and clinical applications of WAI measurements.
Effectiveness of Variable-Gain Kalman Filter Based on Angle Error Calculated from Acceleration Signals in Lower Limb Angle Measurement with Inertial Sensors

PubMed Central

Watanabe, Takashi

2013-01-01

The wearable sensor system developed by our group, which measured lower limb angles using Kalman-filtering-based method, was suggested to be useful in evaluation of gait function for rehabilitation support. However, it was expected to reduce variations of measurement errors. In this paper, a variable-Kalman-gain method based on angle error that was calculated from acceleration signals was proposed to improve measurement accuracy. The proposed method was tested comparing to fixed-gain Kalman filter and a variable-Kalman-gain method that was based on acceleration magnitude used in previous studies. First, in angle measurement in treadmill walking, the proposed method measured lower limb angles with the highest measurement accuracy and improved significantly foot inclination angle measurement, while it improved slightly shank and thigh inclination angles. The variable-gain method based on acceleration magnitude was not effective for our Kalman filter system. Then, in angle measurement of a rigid body model, it was shown that the proposed method had measurement accuracy similar to or higher than results seen in other studies that used markers of camera-based motion measurement system fixing on a rigid plate together with a sensor or on the sensor directly. The proposed method was found to be effective in angle measurement with inertial sensors. PMID:24282442
Real Time Measures of Effectiveness

DOT National Transportation Integrated Search

2003-06-01

This report describes research that is focused on identifying and determining methods for automatically computing measures of effectiveness (MOEs) when supplied with real time information. The MOEs, along with detection devices such as cameras, roadw...
Sensitivity to Change and Responsiveness of Four Balance Measures for Community-Dwelling Older Adults

PubMed Central

Latham, Nancy K.; Jette, Alan M.; Wagenaar, Robert C.; Ni, Pengsheng; Slavin, Mary D.; Bean, Jonathan F.

2012-01-01

Background Impaired balance has a significant negative impact on mobility, functional independence, and fall risk in older adults. Although several, well-respected balance measures are currently in use, there is limited evidence regarding the most appropriate measure to assess change in community-dwelling older adults. Objective The aim of this study was to compare floor and ceiling effects, sensitivity to change, and responsiveness across the following balance measures in community-dwelling elderly people with functional limitations: Berg Balance Scale (BBS), Performance-Oriented Mobility Assessment total scale (POMA-T), POMA balance subscale (POMA-B), and Dynamic Gait Index (DGI). Design Retrospective data from a 16-week exercise trial were used. Secondary analyses were conducted on the total sample and by subgroups of baseline functional limitation or baseline balance scores. Methods Participants were 111 community-dwelling older adults 65 years of age or older, with functional limitations. Sensitivity to change was assessed using effect size, standardized response mean, and paired t tests. Responsiveness was assessed using minimally important difference (MID) estimates. Results No floor effects were noted. Ceiling effects were observed on all measures, including in people with moderate to severe functional limitations. The POMA-T, POMA-B, and DGI showed significantly larger ceiling effects compared with the BBS. All measures had low sensitivity to change in total sample analyses. Subgroup analyses revealed significantly better sensitivity to change in people with lower compared with higher baseline balance scores. Although both the total sample and lower baseline balance subgroups showed statistically significant improvement from baseline to 16 weeks on all measures, only the lower balance subgroup showed change scores that consistently exceeded corresponding MID estimates. Limitations This study was limited to comparing 4 measures of balance, and anchor-based methods for assessing MID could not be reported. Conclusions Important limitations, including ceiling effects and relatively low sensitivity to change and responsiveness, were noted across all balance measures, highlighting their limited utility across the full spectrum of the community-dwelling elderly population. New, more challenging measures are needed for better discrimination of balance ability in community-dwelling elderly people at higher functional levels. PMID:22114200
Effects of stakeholder involvement in river management

NASA Astrophysics Data System (ADS)

Buchecker, M.; Menzel, S.

2012-04-01

In the last decades, in many parts of Europe involving local stakeholders or the local public in river management has become a standard procedure. For many decision makers, the purpose of involving other interest groups is limited to achieving a sufficient local acceptance of the project, and accordingly they adopt minimal forms of involvement. Theoretical literature and first empirical studies, however, suggest that stakeholder involvement can have, if done in appropriate quality, have much more far-reaching benefits for a sustainable river management such as a better consensus, social learning and social capital building. But there is so far only little reliable evidence that and under which conditions such benefits or effects in fact result from stakeholder involvement processes. The reason for this is that such involvement processes represent very complex social interventions, and all"affordable"effect measurement methods have their weaknesses. In our project we wanted to find out which were the really robust social effects of stakeholder involvement in river management. We therefore evaluated a number of real Swiss case studies of participatory river management using three different approaches of effect measurements: a quasi-experimental approach using repeated standardized measurement of stakeholders' attitudes, a qualitative long-term ex-post measurement approach based on interviews with stakeholders of five participatory river projects, and a comparative analysis approach based on data of residents effect assessments of participatory river planning gathered in a Swiss national survey. The analysis of all three evaluation studies confirmed that stakeholder involvement in river management projects have substantive social effects. The comparison of the results of the three measurement approaches revealed that social learning and acceptance building were the most robust effects of stakeholder involvement, as they were confirmed by all the three measurement approaches. Social capital building, however, was not found to be a relevant effect in the long-term qualitative ex-post measurement of stakeholder processes in river management. The data suggested that social capital was "only" maintained or reproduced by the involvement process. The results will be discussed, and implications for the practice as well as for future research will be drawn.
Thermal conductivity of rigid foam insulations for aerospace vehicles

NASA Astrophysics Data System (ADS)

Barrios, M.; Van Sciver, S. W.

2013-05-01

The present work describes measurements of the effective thermal conductivity of NCFI 24-124 foam, a spray-on foam insulation used formerly on the Space Shuttle external fuel tank. A novel apparatus to measure the effective thermal conductivity of rigid foam at temperatures ranging from 20 K to 300 K was developed and used to study three samples of NCFI 24-124 foam insulation. In preparation for measurement, the foam samples were either treated with a uniquely designed moisture absorption apparatus or different residual gases to study their impact on the effective thermal conductivity of the foam. The resulting data are compared to other measurements and mathematical models reported in the literature.

Effects of automobile steering characteristics on driver vehicle system dynamics in regulation tasks

NASA Technical Reports Server (NTRS)

Mcruer, D. T.; Klein, R.

1975-01-01

A regulation task which subjected the automobile to a random gust disturbance which is countered by driver control action is used to study the effects of various automobile steering characteristics on the driver/vehicle system. The experiments used a variable stability automobile specially configured to permit insertion of the simulated gust disturbance and the measurement of the driver/vehicle system characteristics. Driver/vehicle system dynamics were measured and interpreted as an effective open loop system describing function. Objective measures of system bandwidth, stability, and time delays were deduced and compared. These objective measures were supplemented by driver ratings. A tentative optimum range of vehicle dynamics for the directional regulation task was established.
Multivariate meta-analysis of prognostic factor studies with multiple cut-points and/or methods of measurement.

PubMed

Riley, Richard D; Elia, Eleni G; Malin, Gemma; Hemming, Karla; Price, Malcolm P

2015-07-30

A prognostic factor is any measure that is associated with the risk of future health outcomes in those with existing disease. Often, the prognostic ability of a factor is evaluated in multiple studies. However, meta-analysis is difficult because primary studies often use different methods of measurement and/or different cut-points to dichotomise continuous factors into 'high' and 'low' groups; selective reporting is also common. We illustrate how multivariate random effects meta-analysis models can accommodate multiple prognostic effect estimates from the same study, relating to multiple cut-points and/or methods of measurement. The models account for within-study and between-study correlations, which utilises more information and reduces the impact of unreported cut-points and/or measurement methods in some studies. The applicability of the approach is improved with individual participant data and by assuming a functional relationship between prognostic effect and cut-point to reduce the number of unknown parameters. The models provide important inferential results for each cut-point and method of measurement, including the summary prognostic effect, the between-study variance and a 95% prediction interval for the prognostic effect in new populations. Two applications are presented. The first reveals that, in a multivariate meta-analysis using published results, the Apgar score is prognostic of neonatal mortality but effect sizes are smaller at most cut-points than previously thought. In the second, a multivariate meta-analysis of two methods of measurement provides weak evidence that microvessel density is prognostic of mortality in lung cancer, even when individual participant data are available so that a continuous prognostic trend is examined (rather than cut-points). © 2015 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.
Simulation of real-gas effects on pressure distributions for aeroassist flight experiment vehicle and comparison with prediction

NASA Technical Reports Server (NTRS)

Micol, John R.

1992-01-01

Pressure distributions measured on a 60 degree half-angle elliptic cone, raked off at an angle of 73 degrees from the cone centerline and having an ellipsoid nose (ellipticity equal to 2.0 in the symmetry plane) are presented for angles of attack from -10 degrees to 10 degrees. The high normal shock density ratio aspect of a real gas was simulated by testing in Mach 6 air and CF sub 4 (density ratio equal to 5.25 and 12.0, respectively). The effects of Reynolds number, angle of attack, and normal shock density ratio on these measurements are examined, and comparisons with a three dimensional Euler code known as HALIS are made. A significant effect of density ratio on pressure distributions on the cone section of the configuration was observed; the magnitude of this effect decreased with increasing angle of attack. The effect of Reynolds number on pressure distributions was negligible for forebody pressure distributions, but a measurable effect was noted on base pressures. In general, the HALIS code accurately predicted the measured pressure distributions in air and CF sub 4.
Innovative acoustic techniques for studying new materials and new developments in solid state physics

NASA Astrophysics Data System (ADS)

Maynard, Julian D.

1994-06-01

The goals of this project involve the use of innovative acoustic techniques to study new materials and new developments in solid state physics. Major accomplishments include (a) the preparation and publication of a number of papers and book chapters, (b) the measurement and new analysis of more samples of aluminum quasicrystal and its cubic approximant to eliminate the possibility of sample artifacts, (c) the use of resonant ultrasound to measure acoustic attenuation and determine the effects of heat treatment on ceramics, (d) the extension of our technique for measuring even lower (possibly the lowest) infrared optical absorption coefficient, and (e) the measurement of the effects of disorder on the propagation of a nonlinear pulse, and (f) the observation of statistical effects in measurements of individual bond breaking events in fracture.
Effects of methylphenidate on working memory components: influence of measurement.

PubMed

Bedard, Anne-Claude; Jain, Umesh; Johnson, Sheilah Hogg; Tannock, Rosemary

2007-09-01

To investigate the effects of methylphenidate (MPH) on components of working memory (WM) in attention-deficit hyperactivity disorder (ADHD) and determine the responsiveness of WM measures to MPH. Participants were a clinical sample of 50 children and adolescents with ADHD, aged 6 to 16 years old, who participated in an acute randomized, double-blind, placebo-controlled, crossover trial with single challenges of three MPH doses. Four components of WM were investigated, which varied in processing demands (storage versus manipulation of information) and modality (auditory-verbal; visual-spatial), each of which was indexed by a minimum of two separate measures. MPH improved the ability to store visual-spatial information irrespective of instrument used, but had no effects on the storage of auditory-verbal information. By contrast, MPH enhanced the ability to manipulate both auditory-verbal and visual-spatial information, although effects were instrument specific in both cases. MPH effects on WM are selective: they vary as a function of WM component and measurement.
Test order in teacher-rated behavior assessments: Is counterbalancing necessary?

PubMed

Kooken, Janice; Welsh, Megan E; McCoach, D Betsy; Miller, Faith G; Chafouleas, Sandra M; Riley-Tillman, T Chris; Fabiano, Gregory

2017-01-01

Counterbalancing treatment order in experimental research design is well established as an option to reduce threats to internal validity, but in educational and psychological research, the effect of varying the order of multiple tests to a single rater has not been examined and is rarely adhered to in practice. The current study examines the effect of test order on measures of student behavior by teachers as raters utilizing data from a behavior measure validation study. Using multilevel modeling to control for students nested within teachers, the effect of rating an earlier measure on the intercept or slope of a later behavior assessment was statistically significant in 22% of predictor main effects for the spring test period. Test order effects had potential for high stakes consequences with differences large enough to change risk classification. Results suggest that researchers and practitioners in classroom settings using multiple measures evaluate the potential impact of test order. Where possible, they should counterbalance when the risk of an order effect exists and report justification for the decision to not counterbalance. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Effect of Control Mode and Test Rate on the Measured Fracture Toughness of Advanced Ceramics

NASA Technical Reports Server (NTRS)

Hausmann, Bronson D.; Salem, Jonathan A.

2018-01-01

The effects of control mode and test rate on the measured fracture toughness of ceramics were evaluated by using chevron-notched flexure specimens in accordance with ASTM C1421. The use of stroke control gave consistent results with about 2% (statistically insignificant) variation in measured fracture toughness for a very wide range of rates (0.005 to 0.5 mm/min). Use of strain or crack mouth opening displacement (CMOD) control gave approx. 5% (statistically significant) variation over a very wide range of rates (1 to 80 µm/m/s), with the measurements being a function of rate. However, the rate effect was eliminated by use of dry nitrogen, implying a stress corrosion effect rather than a stability effect. With the use of a nitrogen environment during strain controlled tests, fracture toughness values were within about 1% over a wide range of rates (1 to 80 micons/m/s). CMOD or strain control did allow stable crack extension well past maximum force, and thus is preferred for energy calculations. The effort is being used to confirm recommendations in ASTM Test Method C1421 on fracture toughness measurement.
Current Status of the Matson Evaluation of Drug Side Effects (MEDS)

ERIC Educational Resources Information Center

Matson, Johnny L.; Cervantes, Paige E.

2013-01-01

The Matson Evaluation of Drug Side Effects (MEDS) is currently the best established and most researched measure of drug side effects in the intellectual disability (ID) literature. Initial research was conducted on its psychometric properties such as reliability and validity. More recent research studies have used the measure to determine the…
Numerical correction of the phase error due to electromagnetic coupling effects in 1D EIT borehole measurements

NASA Astrophysics Data System (ADS)

Zhao, Y.; Zimmermann, E.; Huisman, J. A.; Treichel, A.; Wolters, B.; van Waasen, S.; Kemna, A.

2012-12-01

Spectral Electrical Impedance Tomography (EIT) allows obtaining images of the complex electrical conductivity for a broad frequency range (mHz to kHz). It has recently received increased interest in the field of near-surface geophysics and hydrogeophysics because of the relationships between complex electrical properties and hydrogeological and biogeochemical properties and processes observed in the laboratory with Spectral Induced Polarization (SIP). However, these laboratory results have also indicated that a high phase accuracy is required for surface and borehole EIT measurements because many soils and sediments are only weakly polarizable and show phase angles between 1 and 20 mrad. In the case of borehole EIT measurements, long cables and electrode chains (>10 meters) are typically used, which leads to undesired inductive coupling between the electric loops for current injection and potential measurement and capacitive coupling between the electrically conductive cable shielding and the soil. Depending on the electrical properties of the subsurface and the measured transfer impedances, both coupling effects can cause large phase errors that have typically limited the frequency bandwidth of field EIT measurement to the mHz to Hz range. The aim of this study is i) to develop correction procedures for these coupling effects to extend the applicability of EIT to the kHz range and ii) to validate these corrections using controlled laboratory measurements and field measurements. In order to do so, the inductive coupling effect was modeled using electronic circuit models and the capacitive coupling effect was modeled by integrating discrete capacitances in the electrical forward model describing the EIT measurement process. The correction methods were successfully verified with measurements under controlled conditions in a water-filled rain barrel, where a high phase accuracy of 2 mrad in the frequency range up to 10 kHz was achieved. In a field demonstration using a 25 m borehole chain with 8 electrodes with 1 m electrode separation, the corrections were also applied within a 1D inversion of the borehole EIT measurements. The results show that the correction methods increased the measurement accuracy considerably.
Effective dose estimation for pediatric upper gastrointestinal examinations using an anthropomorphic phantom set and metal oxide semiconductor field-effect transistor (MOSFET) technology.

PubMed

Emigh, Brent; Gordon, Christopher L; Connolly, Bairbre L; Falkiner, Michelle; Thomas, Karen E

2013-09-01

There is a need for updated radiation dose estimates in pediatric fluoroscopy given the routine use of new dose-saving technologies and increased radiation safety awareness in pediatric imaging. To estimate effective doses for standardized pediatric upper gastrointestinal (UGI) examinations at our institute using direct dose measurement, as well as provide dose-area product (DAP) to effective dose conversion factors to be used for the estimation of UGI effective doses for boys and girls up to 10 years of age at other centers. Metal oxide semiconductor field-effect transistor (MOSFET) dosimeters were placed within four anthropomorphic phantoms representing children ≤10 years of age and exposed to mock UGI examinations using exposures much greater than used clinically to minimize measurement error. Measured effective dose was calculated using ICRP 103 weights and scaled to our institution's standardized clinical UGI (3.6-min fluoroscopy, four spot exposures and four examination beam projections) as determined from patient logs. Results were compared to Monte Carlo simulations and related to fluoroscope-displayed DAP. Measured effective doses for standardized pediatric UGI examinations in our institute ranged from 0.35 to 0.79 mSv in girls and were 3-8% lower for boys. Simulation-derived and measured effective doses were in agreement (percentage differences <19%, T > 0.18). DAP-to-effective dose conversion factors ranged from 6.5 ×10(-4) mSv per Gy-cm(2) to 4.3 × 10(-3) mSv per Gy-cm(2) for girls and were similarly lower for boys. Using modern fluoroscopy equipment, the effective dose associated with the UGI examination in children ≤10 years at our institute is < 1 mSv. Estimations of effective dose associated with pediatric UGI examinations can be made for children up to the age of 10 using the DAP-normalized conversion factors provided in this study. These estimates can be further refined to reflect individual hospital examination protocols through the use of direct organ dose measurement using MOSFETs, which were shown to agree with Monte Carlo simulated doses.
Cost-Effective Marine Protection - A Pragmatic Approach

PubMed Central

Oinonen, Soile; Hyytiäinen, Kari; Ahlvik, Lassi; Laamanen, Maria; Lehtoranta, Virpi; Salojärvi, Joona; Virtanen, Jarno

2016-01-01

This paper puts forward a framework for probabilistic and holistic cost-effectiveness analysis to provide support in selecting the least-cost set of measures to reach a multidimensional environmental objective. Following the principles of ecosystem-based management, the framework includes a flexible methodology for deriving and populating criteria for effectiveness and costs and analyzing complex ecological-economic trade-offs under uncertainty. The framework is applied in the development of the Finnish Programme of Measures (PoM) for reaching the targets of the EU Marine Strategy Framework Directive (MSFD). The numerical results demonstrate that substantial cost savings can be realized from careful consideration of the costs and multiple effects of management measures. If adopted, the proposed PoM would yield improvements in the state of the Baltic Sea, but the overall objective of the MSFD would not be reached by the target year of 2020; for various environmental and administrative reasons, it would take longer for most measures to take full effect. PMID:26751965
Acute effects of MDMA on autonomic cardiac activity and their relation to subjective prosocial and stimulant effects.

PubMed

Clark, Christine M; Frye, Charles G; Wardle, Margaret C; Norman, Greg J; de Wit, Harriet

2015-03-01

MDMA is a stimulant with unique "prosocial" effects, the physiological and pharmacological mechanisms of which are unknown. Here, we examine the relationship of measures of parasympathetic and sympathetic nervous system activity to the prosocial effects of MDMA. Parasympathetic activity was measured using respiratory sinus arrhythmia (RSA) and sympathetic activity using pre-ejection period (PEP). Over three sessions, 33 healthy volunteers received placebo, 0.75 mg/kg, and 1.5 mg/kg MDMA under counterbalanced, double-blind conditions, while we measured subjective feelings, RSA, and PEP. RSA and PEP data were available for 26 and 21 participants, respectively. MDMA increased prosocial and stimulated feelings, decreased RSA, and decreased PEP. At 1.5 mg/kg, subjective prosocial effects correlated with stimulated feelings and PEP, but not RSA. This suggests sympathetic, rather than parasympathetic, effects relate to the prosocial effects of MDMA. © 2014 Society for Psychophysiological Research.
Ordinal probability effect measures for group comparisons in multinomial cumulative link models.

PubMed

Agresti, Alan; Kateri, Maria

2017-03-01

We consider simple ordinal model-based probability effect measures for comparing distributions of two groups, adjusted for explanatory variables. An "ordinal superiority" measure summarizes the probability that an observation from one distribution falls above an independent observation from the other distribution, adjusted for explanatory variables in a model. The measure applies directly to normal linear models and to a normal latent variable model for ordinal response variables. It equals Φ(β/2) for the corresponding ordinal model that applies a probit link function to cumulative multinomial probabilities, for standard normal cdf Φ and effect β that is the coefficient of the group indicator variable. For the more general latent variable model for ordinal responses that corresponds to a linear model with other possible error distributions and corresponding link functions for cumulative multinomial probabilities, the ordinal superiority measure equals exp(β)/[1+exp(β)] with the log-log link and equals approximately exp(β/2)/[1+exp(β/2)] with the logit link, where β is the group effect. Another ordinal superiority measure generalizes the difference of proportions from binary to ordinal responses. We also present related measures directly for ordinal models for the observed response that need not assume corresponding latent response models. We present confidence intervals for the measures and illustrate with an example. © 2016, The International Biometric Society.
Responsiveness of pain and disability measures for chronic whiplash.

PubMed

Stewart, Mark; Maher, Christopher G; Refshauge, Kathryn M; Bogduk, Nikolai; Nicholas, Michael

2007-03-01

Cohort study. To evaluate the responsiveness of common pain and disability measures in a cohort of patients with chronic whiplash. Pain and disability are routinely measured in clinical practice and clinical research. However, to date, a head-to-head comparison of competing measures for whiplash patients has not been performed. Pain (pain intensity, bothersomeness, and SF-36 bodily pain score) and disability (Patient Specific Functional Scale, Neck Disability Index, Functional Rating Index, Copenhagen Scale, and SF-36 physical summary) measures were completed by 132 patients with chronic whiplash at baseline and then again after 6 weeks together with an 11-point global perceived effect scale. Internal responsiveness was evaluated by calculating effect sizes and standardized response means, and external responsiveness by correlating change scores with global perceived effect scores and by ROC curves. The ranking of responsiveness was consistent across the different analyses. Pain bothersomeness was more responsive than pain intensity, which was more responsive than the SF-36 pain measure. The Patient Specific Functional Scale was the most responsive disability measure, followed by the spine-specific measures, with the SF-36 physical summary measure the least responsive. Pain bothersomeness and the Patient Specific Functional Scale provide the most responsive measures of pain and disability, respectively, in patients with chronic whiplash.
Systematic Effects on Duration Measurements of Gamma-Ray Bursts

NASA Technical Reports Server (NTRS)

Koshut, Thomas M.; Paciesas, William S.; Kouveliotou, Chryssa; vanParadijs, Jan; Pendleton, Geoffrey N.; Fishman, Gerald J.; Meegan, Charles A.

1996-01-01

The parameters T(sub 90) and T(sub 50) have recently been introduced as a measurement of the duration of gamma-ray bursts. We present here a description of the method of measuring T(sub 90) and T(sub 50) and its application to gamma-ray bursts observed with the Burst and Transient Source Experiment (BATSE) onboard the Compton Gamma-Ray Observatory (CGRO). We use simulated as well as observed time profiles to address some of the possible systematic effects affecting individual T(sub 90) (T(sub 50)) measurements. We show that these systematic effects do not mimic those effects that would result from time dilation if the burst sources are at distances of several Gpc. We discuss the impact of these systematic effects on the T(sub 90) (T(sub 50)) distributions for the gamma-ray bursts observed with BATSE. We distinguish between various types of T(sub 90) (T(sub 50)) distributions, and discuss the ways in which distributions observed with different experiments can vary, even though the measurements for commonly observed bursts may be the same. We then discuss the distributions observed with BATSE and compare them to those observed with other experiments.
Lady Liberty and Godfather Death as candidates for linguistic relativity? Scrutinizing the gender congruency effect on personified allegories with explicit and implicit measures.

PubMed

Bender, Andrea; Beller, Sieghard; Klauer, Karl Christoph

2016-01-01

Linguistic relativity--the idea that language affects thought by way of its grammatical categorizations--has been controversially debated for decades. One of the contested cases is the grammatical gender of nouns, which is claimed to affect how their referents are conceptualized (i.e., as rather female or male in congruence with the grammatical gender of the noun), especially when used allegorically. But is this association strong enough to be detected in implicit measures, and, if so, can we disentangle effects of grammatical gender and allegorical association? Three experiments with native speakers of German tackled these questions. They revealed a gender congruency effect on allegorically used nouns, but this effect was stronger with an explicit measure (assignment of biological sex) than with an implicit measure (Extrinsic Affective Simon Task) and disappeared in the implicit measure when grammatical gender and allegorical associations were set into contrast. Taken together, these findings indicate that the observed congruency effect was driven by the association of nouns with personifications rather than by their grammatical gender. In conclusion, we also discuss implications of these findings for linguistic relativity.
The immediate effect of individual manipulation techniques on pulmonary function measures in persons with chronic obstructive pulmonary disease

PubMed Central

Noll, Donald R; Johnson, Jane C; Baer, Robert W; Snider, Eric J

2009-01-01

Background The use of manipulation has long been advocated in the treatment of chronic obstructive pulmonary disease (COPD), but few randomized controlled clinical trials have measured the effect of manipulation on pulmonary function. In addition, the effects of individual manipulative techniques on the pulmonary system are poorly understood. Therefore, the purpose of this study was to determine the immediate effects of four osteopathic techniques on pulmonary function measures in persons with COPD relative to a minimal-touch control protocol. Methods Persons with COPD aged 50 and over were recruited for the study. Subjects received five, single-technique treatment sessions: minimal-touch control, thoracic lymphatic pump (TLP) with activation, TLP without activation, rib raising, and myofascial release. There was a 4-week washout period between sessions. Protocols were given in random order until all five techniques had been administered. Pulmonary function measures were obtained at baseline and 30-minutes posttreatment. For the actual pulmonary function measures and percent predicted values, Wilcoxon signed rank tests were used to test within-technique changes from baseline. For the percent change from baseline, Friedman tests were used to test for between-technique differences. Results Twenty-five subjects were enrolled in the study. All four tested osteopathic techniques were associated with adverse posttreatment changes in pulmonary function measures; however, different techniques changed different measures. TLP with activation increased posttreatment residual volume compared to baseline, while TLP without activation did not. Side effects were mild, mostly posttreatment chest wall soreness. Surprisingly, the majority of subjects believed they could breathe better after receiving osteopathic manipulation. Conclusion In persons with COPD, TLP with activation, TLP without activation, rib raising, and myofascial release mildly worsened pulmonary function measures immediately posttreatment relative to baseline measurements. The activation component of the TLP technique appears to increase posttreatment residual volume. Despite adverse changes in pulmonary function measures, persons with COPD subjectively reported they benefited from osteopathic manipulation. PMID:19814829
The immediate effect of individual manipulation techniques on pulmonary function measures in persons with chronic obstructive pulmonary disease.

PubMed

Noll, Donald R; Johnson, Jane C; Baer, Robert W; Snider, Eric J

2009-10-08

The use of manipulation has long been advocated in the treatment of chronic obstructive pulmonary disease (COPD), but few randomized controlled clinical trials have measured the effect of manipulation on pulmonary function. In addition, the effects of individual manipulative techniques on the pulmonary system are poorly understood. Therefore, the purpose of this study was to determine the immediate effects of four osteopathic techniques on pulmonary function measures in persons with COPD relative to a minimal-touch control protocol. Persons with COPD aged 50 and over were recruited for the study. Subjects received five, single-technique treatment sessions: minimal-touch control, thoracic lymphatic pump (TLP) with activation, TLP without activation, rib raising, and myofascial release. There was a 4-week washout period between sessions. Protocols were given in random order until all five techniques had been administered. Pulmonary function measures were obtained at baseline and 30-minutes posttreatment. For the actual pulmonary function measures and percent predicted values, Wilcoxon signed rank tests were used to test within-technique changes from baseline. For the percent change from baseline, Friedman tests were used to test for between-technique differences. Twenty-five subjects were enrolled in the study. All four tested osteopathic techniques were associated with adverse posttreatment changes in pulmonary function measures; however, different techniques changed different measures. TLP with activation increased posttreatment residual volume compared to baseline, while TLP without activation did not. Side effects were mild, mostly posttreatment chest wall soreness. Surprisingly, the majority of subjects believed they could breathe better after receiving osteopathic manipulation. In persons with COPD, TLP with activation, TLP without activation, rib raising, and myofascial release mildly worsened pulmonary function measures immediately posttreatment relative to baseline measurements. The activation component of the TLP technique appears to increase posttreatment residual volume. Despite adverse changes in pulmonary function measures, persons with COPD subjectively reported they benefited from osteopathic manipulation.
Designing Teacher Evaluation Systems: New Guidance from the Measures of Effective Teaching Project

ERIC Educational Resources Information Center

Kane, Thomas J., Ed.; Kerr, Kerri A., Ed.; Pianta, Robert C., Ed.

2014-01-01

What is effective teaching? It is not enough to say "I know it when I see it"--not when we are expecting so much more from students and teachers than in the past. To help teachers achieve greater success with their students we need new and better ways to identify and develop effective teaching. The Measures of Effective Teaching (MET)…
The Effectiveness of Lifestyle Triple P in the Netherlands: A Randomized Controlled Trial

PubMed Central

Gerards, Sanne M. P. L.; Dagnelie, Pieter C.; Gubbels, Jessica S.; van Buuren, Stef; Hamers, Femke J. M.; Jansen, Maria W. J.; van der Goot, Odilia H. M.; de Vries, Nanne K.; Sanders, Matthew R.; Kremers, Stef P. J.

2015-01-01

Introduction Lifestyle Triple P is a general parenting intervention which focuses on preventing further excessive weight gain in overweight and obese children. The objective of the current study was to assess the effectiveness of the Lifestyle Triple P intervention in the Netherlands. Method We used a parallel randomized controlled design to test the effectiveness of the intervention. In total, 86 child-parent triads (children 4–8 years old, overweight or obese) were recruited and randomly assigned (allocation ratio 1:1) to the Lifestyle Triple P intervention or the control condition. Parents in the intervention condition received a 14-week intervention consisting of ten 90-minute group sessions and four individual telephone sessions. Primary outcome measure was the children’s body composition (BMI z-scores, waist circumference and skinfolds). The research assistant who performed the measurements was blinded for group assignment. Secondary outcome measures were the children’s dietary behavior and physical activity level, parenting practices, parental feeding style, parenting style, and parental self-efficacy. Outcome measures were assessed at baseline and 4 months (short-term) and 12 months (long-term) after baseline. Multilevel multiple regression analyses were conducted to determine the effect of the intervention on primary and secondary outcome measures. Results No intervention effects were found on children’s body composition. Analyses of secondary outcomes showed positive short-term intervention effects on children’s soft-drink consumption and parental responsibility regarding physical activity, encouragement to eat, psychological control, and efficacy and satisfaction with parenting. Longer-term intervention effects were found on parent’s report of children’s time spent on sedentary behavior and playing outside, parental monitoring food intake, and responsibility regarding nutrition. Conclusion Although the Lifestyle Triple P intervention showed positive effects on some parent reported child behaviors and parenting measures, no effects were visible on children’s body composition or objectively measured physical activity. Several adjustments of the intervention content are recommended, for example including a booster session. Trial Registration Nederlands Trial Register NTR 2555 PMID:25849523

Line spread instrumentation for propagation measurements

NASA Technical Reports Server (NTRS)

Bailey, W. H., Jr.

1980-01-01

A line spread device capable of yielding direct measure of a laser beam's line spread function (LSF) was developed and employed in propagation tests conducted in a wind tunnel to examine optimal acoustical suppression techniques for laser cavities exposed to simulated aircraft aerodynamic environments. Measurements were made on various aerodynamic fences and cavity air injection techniques that effect the LSF of a propagating laser. Using the quiescent tunnel as a control, the relative effect of each technique on laser beam quality was determined. The optical instrument employed enabled the comparison of relative beam intensity for each fence or mass injection. It was found that fence height had little effect on beam quality but fence porosity had a marked effect, i.e., 58% porosity alleviated cavity resonance and degraded the beam the least. Mass injection had little effect on the beam LSF. The use of a direct LSF measuring device proved to be a viable means of determining aerodynamic seeing qualities of flow fields.
Control of systematic uncertainties in the storage ring search for an electric dipole moment by measuring the electric quadrupole moment

NASA Astrophysics Data System (ADS)

Magiera, Andrzej

2017-09-01

Measurements of electric dipole moment (EDM) for light hadrons with use of a storage ring have been proposed. The expected effect is very small, therefore various subtle effects need to be considered. In particular, interaction of particle's magnetic dipole moment and electric quadrupole moment with electromagnetic field gradients can produce an effect of a similar order of magnitude as that expected for EDM. This paper describes a very promising method employing an rf Wien filter, allowing to disentangle that contribution from the genuine EDM effect. It is shown that both these effects could be separated by the proper setting of the rf Wien filter frequency and phase. In the EDM measurement the magnitude of systematic uncertainties plays a key role and they should be under strict control. It is shown that particles' interaction with field gradients offers also the possibility to estimate global systematic uncertainties with the precision necessary for an EDM measurement with the planned accuracy.
Reducing Hunger-Associated Symptoms: The Midmorning Nutrition Break

ERIC Educational Resources Information Center

Sweeney, Nancy M.; Tucker, Joanne; Reynosa, Brenda; Glaser, Dale

2006-01-01

This study measured the effectiveness of a 9 a.m. nutrition break after it had been implemented for 1 academic year at an inner-city high school. Effectiveness was measured by student participation rates, student and teacher evaluations of hunger-associated symptoms experienced by students, and teacher evaluations of the effects on the learning…
Radioactive and magnetic investigations

NASA Technical Reports Server (NTRS)

Heye, D.; Beiersdorf, H.

1979-01-01

Age and growth pattern determination of manganese nodules were explored. Two methods are discussed: (1) measurement of the presence of radioactive iodine isotopes; which is effective only up to 3.105 years, and (2) measurements of magnetism. The growth rates of three nodules were determined. The surface of the nodule was recent, and the overall age of the nodule could be determined with accuracy of better than 30%. Measurement of paleomagnetic effect was attempted to determine wider age ranges, however, the measured sign changes could not be interpreted as paleomagnetic reversals.
Comparing Different Suicide Prevention Measures at Bridges and Buildings: Lessons We Have Learned from a National Survey in Switzerland

PubMed Central

Hemmer, Alexander; Meier, Philipp; Reisch, Thomas

2017-01-01

The goal of the study was to compare the effectiveness of different suicide prevention measures implemented on bridges and other high structures in Switzerland. A national survey identified all jumping hotspots that have been secured in Switzerland; of the 15 that could be included in this study, 11 were secured by vertical barriers and 4 were secured by low-hanging horizontal safety nets. The study made an overall and individual pre-post analysis by using Mantel-Haenszel Tests, regression methods and calculating rate ratios. Barriers and safety nets were both effective, with mean suicide reduction of 68.7% (barriers) and 77.1% (safety nets), respectively. Measures that do not secure the whole hotspot and still allow jumps of 15 meters or more were less effective. Further, the analyses revealed that barriers of at least 2.3 m in height and safety-nets fixed significantly below pedestrian level deterred suicidal jumps. Secured bridgeheads and inbound angle barriers seemed to enhance the effectiveness of the measure. Findings can help to plan and improve the effectiveness of future suicide prevention measures on high structures. PMID:28060950
Effects of true density, compacted mass, compression speed, and punch deformation on the mean yield pressure.

PubMed

Gabaude, C M; Guillot, M; Gautier, J C; Saudemon, P; Chulia, D

1999-07-01

Compressibility properties of pharmaceutical materials are widely characterized by measuring the volume reduction of a powder column under pressure. Experimental data are commonly analyzed using the Heckel model from which powder deformation mechanisms are determined using mean yield pressure (Py). Several studies from the literature have shown the effects of operating conditions on the determination of Py and have pointed out the limitations of this model. The Heckel model requires true density and compacted mass values to determine Py from force-displacement data. It is likely that experimental errors will be introduced when measuring the true density and compacted mass. This study investigates the effects of true density and compacted mass on Py. Materials having different particle deformation mechanisms are studied. Punch displacement and applied pressure are measured for each material at two compression speeds. For each material, three different true density and compacted mass values are utilized to evaluate their effect on Py. The calculated variation of Py reaches 20%. This study demonstrates that the errors in measuring true density and compacted mass have a greater effect on Py than the errors incurred from not correcting the displacement measurements due to punch elasticity.
Mediation analysis when a continuous mediator is measured with error and the outcome follows a generalized linear model

PubMed Central

Valeri, Linda; Lin, Xihong; VanderWeele, Tyler J.

2014-01-01

Mediation analysis is a popular approach to examine the extent to which the effect of an exposure on an outcome is through an intermediate variable (mediator) and the extent to which the effect is direct. When the mediator is mis-measured the validity of mediation analysis can be severely undermined. In this paper we first study the bias of classical, non-differential measurement error on a continuous mediator in the estimation of direct and indirect causal effects in generalized linear models when the outcome is either continuous or discrete and exposure-mediator interaction may be present. Our theoretical results as well as a numerical study demonstrate that in the presence of non-linearities the bias of naive estimators for direct and indirect effects that ignore measurement error can take unintuitive directions. We then develop methods to correct for measurement error. Three correction approaches using method of moments, regression calibration and SIMEX are compared. We apply the proposed method to the Massachusetts General Hospital lung cancer study to evaluate the effect of genetic variants mediated through smoking on lung cancer risk. PMID:25220625
Measurement of effective bulk and contact resistance of gas diffusion layer under inhomogeneous compression - Part I: Electrical conductivity

NASA Astrophysics Data System (ADS)

Vikram, Ajit; Chowdhury, Prabudhya Roy; Phillips, Ryan K.; Hoorfar, Mina

2016-07-01

This paper describes a measurement technique developed for the determination of the effective electrical bulk resistance of the gas diffusion layer (GDL) and the contact resistance distribution at the interface of the GDL and the bipolar plate (BPP). The novelty of this study is the measurement and separation of the bulk and contact resistance under inhomogeneous compression, occurring in an actual fuel cell assembly due to the presence of the channels and ribs on the bipolar plates. The measurement of the electrical contact resistance, contributing to nearly two-third of the ohmic losses in the fuel cell assembly, shows a non-linear distribution along the GDL/BPP interface. The effective bulk resistance of the GDL under inhomogeneous compression showed a decrease of nearly 40% compared to that estimated for homogeneous compression at different compression pressures. Such a decrease in the effective bulk resistance under inhomogeneous compression could be due to the non-uniform distribution of pressure under the ribs and the channels. This measurement technique can be used to identify optimum GDL, BPP and channel-rib structures based on minimum bulk and contact resistances measured under inhomogeneous compression.
Estimating Fluctuating Pressures From Distorted Measurements

NASA Technical Reports Server (NTRS)

Whitmore, Stephen A.; Leondes, Cornelius T.

1994-01-01

Two algorithms extract estimates of time-dependent input (upstream) pressures from outputs of pressure sensors located at downstream ends of pneumatic tubes. Effect deconvolutions that account for distoring effects of tube upon pressure signal. Distortion of pressure measurements by pneumatic tubes also discussed in "Distortion of Pressure Signals in Pneumatic Tubes," (ARC-12868). Varying input pressure estimated from measured time-varying output pressure by one of two deconvolution algorithms that take account of measurement noise. Algorithms based on minimum-covariance (Kalman filtering) theory.
Distance Between Sets as an Objective Measure of Retrieval Effectiveness

ERIC Educational Resources Information Center

Heine, M. H.

1973-01-01

The Marczewski-Steinhaus metric provides what appears to be an objective general measure of retrieval effectiveness within the framework of set theory and the theory of metric spaces. (19 references) (Author/SJ)
Improved formula for continuous-wave measurements of ultrasonic phase velocity

NASA Technical Reports Server (NTRS)

Chern, E. J.; Cantrell, J. H., Jr.; Heyman, J. S.

1981-01-01

An improved formula for continuous-wave ultrasonic phase velocity measurements using contact transducers is derived from the transmission line theory. The effect of transducer-sample coupling bonds is considered for measurements of solid samples even though it is often neglected because of the difficulty of accurately determining the bond thickness. Computer models show that the present formula is more accurate than previous expressions. Laboratory measurements using contacting transducers with the present formula are compared to measurements using noncontacting (hence effectively correction-free) capacitive transducers. The results of the experiments verify the validity and accuracy of the new formula.
A theoretical and experimental study of turbulent nonevaporating sprays

NASA Technical Reports Server (NTRS)

Solomon, A. S. P.; Shuen, J. S.; Zhang, Q. F.; Faeth, G. M.

1984-01-01

Measurements and analysis limited to the dilute portions of turbulent nonevaporating sprays injected into a still air environment were completed. Mean and fluctuating velocities and Reynolds stress were measured in the continuous phase. Liquid phase measurements included liquid mass fluxes, drop sizes and drop size and velocity correlation. Initial conditions needed for model evaluation were measured at a location as close to the injector exit as possible. The test sprays showed significant effects of slip and turbulent dispersion of the discrete phase. The measurements were used to evaluate three typical models of these processes: (1) a locally homogenous flow (LHF) model, where slip between the phases were neglected; (2) a deterministic separated flow (DSF) model, where slip was considered but effects of drop dispersion by turbulence were ignored; and (3) a stochastic separated flow (SSF) model, where effects of interphase slip and turbulent dispersion were considered using random-walk computations for drop motion. The LHF and DSF models did not provide very satisfactory predictions for the present measurements. In contrast, the SSF model performed reasonably well with no modifications in the prescription of eddy properties from its original calibration. Some effects of drops on turbulence properties were observed near the dense regions of the sprays.
Measurement and Analysis of Drapeability Effects of Warp-Knit NCF with a Standardised, Automated Testing Device

NASA Astrophysics Data System (ADS)

Christ, Mirko; Miene, Andrea; Mörschel, Ulrich

2017-08-01

Characterising the drapeability of reinforcement fabrics, is one of the most sought after abilities of those designing composite processes and components. This is not surprising as composite processes are being considered in a greater range of fields and applications. Drapeability effects are formed by the irregular rearrangement of fibres. This displacement can occur within the textile plane and result in fibre disorientations, undulations and gaps or the fibres can be pushed into the third dimension - forming wrinkles or loops. To measure such effects in non-crimp fabrics, the Textechno Drapetest automatic drapeability tester was developed. To show its viability as a tool for composite engineering, a set of fabrics was chosen to show that the influence of textile design parameters on drapeability effects is now quantifiable. The Textechno Drapetest uses a sophisticated digital image analysis system to measure the position and direction of fibres and conclude from this information on the extent and intensity of drapeability effects in the textile surface. To measure effects outside the surface, i.e. wrinkles, a laser triangulation sensor is employed. The textiles were varied in the production parameters of stitch point distance in machine direction (MD) and cross direction (CD), the weight per area, and the stitch pattern (tricot and chain). The measurements showed that the new test method is capable of measuring the effects that were expected from classical test setups as well as a range of additional effects. From the results a significant influence of the stitch yarn on the formation of effects can be deduced. Especially the density of stitch points is a parameter that lets the textile producer control the behaviour of the textile when they are formed into a doubly curved three dimensional shape. To control the gap formation, however, the spacing of the stitch points in machine or in crosswise direction is also of importance with a shorter stitch length decreasing the forming of gaps more than a tighter stitch yarn pitch.
Meta-Analyses of the Effects of Tier 2 Type Reading Interventions in Grades K-3.

PubMed

Wanzek, Jeanne; Vaughn, Sharon; Scammacca, Nancy; Gatlin, Brandy; Walker, Melodee A; Capin, Philip

2016-09-01

This meta-analysis extends previous work on extensive Tier 3 type reading interventions (Wanzek & Vaughn, 2007; Wanzek et al., 2013) to Tier 2 type interventions by examining a non-overlapping set of studies addressing the effects of less extensive reading interventions for students with or at risk for reading difficulties in Grades K-3. We examined the overall effects of these interventions on students' foundational skills, language, and comprehension as well as the intervention features that may be associated with improved outcomes. We conducted four meta-analyses on 72 studies to examine effects on (1) standardized foundational skill measures (mean ES = 0.54), (2) not-standardized foundational skill measures (mean ES = 0.62), (3) standardized language/comprehension measures (mean ES = 0.36), and (4) not-standardized language/comprehension measures (mean ES = 1.02). There were no differences in effects related to intervention type, instructional group size, grade level, intervention implementer, or the number of intervention hours.
Broadband EIT borehole measurements with high phase accuracy using numerical corrections of electromagnetic coupling effects

NASA Astrophysics Data System (ADS)

Zhao, Y.; Zimmermann, E.; Huisman, J. A.; Treichel, A.; Wolters, B.; van Waasen, S.; Kemna, A.

2013-08-01

Electrical impedance tomography (EIT) is gaining importance in the field of geophysics and there is increasing interest for accurate borehole EIT measurements in a broad frequency range (mHz to kHz) in order to study subsurface properties. To characterize weakly polarizable soils and sediments with EIT, high phase accuracy is required. Typically, long electrode cables are used for borehole measurements. However, this may lead to undesired electromagnetic coupling effects associated with the inductive coupling between the double wire pairs for current injection and potential measurement and the capacitive coupling between the electrically conductive shield of the cable and the electrically conductive environment surrounding the electrode cables. Depending on the electrical properties of the subsurface and the measured transfer impedances, both coupling effects can cause large phase errors that have typically limited the frequency bandwidth of field EIT measurements to the mHz to Hz range. The aim of this paper is to develop numerical corrections for these phase errors. To this end, the inductive coupling effect was modeled using electronic circuit models, and the capacitive coupling effect was modeled by integrating discrete capacitances in the electrical forward model describing the EIT measurement process. The correction methods were successfully verified with measurements under controlled conditions in a water-filled rain barrel, where a high phase accuracy of 0.8 mrad in the frequency range up to 10 kHz was achieved. The corrections were also applied to field EIT measurements made using a 25 m long EIT borehole chain with eight electrodes and an electrode separation of 1 m. The results of a 1D inversion of these measurements showed that the correction methods increased the measurement accuracy considerably. It was concluded that the proposed correction methods enlarge the bandwidth of the field EIT measurement system, and that accurate EIT measurements can now be made in the mHz to kHz frequency range. This increased accuracy in the kHz range will allow a more accurate field characterization of the complex electrical conductivity of soils and sediments, which may lead to the improved estimation of saturated hydraulic conductivity from electrical properties. Although the correction methods have been developed for a custom-made EIT system, they also have potential to improve the phase accuracy of EIT measurements made with commercial systems relying on multicore cables.
Larval salamander growth responds to enrichment of a nutrient poor headwater stream

Treesearch

Brent J. Johnson; J. Bruce Wallace; AmyD Rosemond; Wyatt F. Cross

2006-01-01

While many studies have measured effects of nutrient enrichment on higher trophic levels in grazing food webs, few such studies exist for detritus-based systems. We measured effects of nitrogen and...
EFFECT OF QUALITY CHRONIC DISEASE MANAGEMENT FOR ALCOHOL AND DRUG DEPENDENCE ON ADDICTION OUTCOMES

PubMed Central

Kim, Theresa W.; Saitz, Richard; Cheng, Debbie M.; Winter, Michael R; Witas, Julie; Samet, Jeffrey H.

2012-01-01

We examinedthe effect ofthe quality of primary care-basedchronic disease management (CDM)for alcohol and/or other drug (AOD) dependenceonaddiction outcomes.We assessed qualityusing 1)avisit frequencybased measure and 2) a self-reported assessment measuring alignment with the chronic care model. The visit frequency based measure had no significant association with addiction outcomes. Theself-reported measure of care - when care was at a CDM clinic - was associated with lower drug addiction severity.The self-reported assessment of care from any healthcare source (CDM clinic or elsewhere)was associated with lower alcoholaddiction severity and abstinence.These findings suggest that high quality CDM for AOD dependence may improve addiction outcomes.Quality measuresbased upon alignment with the chronic care model may better capture features of effective CDM care than a visitfrequency measure. PMID:22840687
The Measurement Structure, Stability and Mediating Effects of Achievement Goals in Math with Middle-School Student Data

ERIC Educational Resources Information Center

Chiang, Yu-Tzu; Lin, Sunny S. J.

2014-01-01

This study examined the measurement structure, cross-year stability of achievement goals, and mediating effects of achievement goals between self-efficacy and math grades in a national sample of Taiwan middle school students. The measurement model with factorial structure showed good fit to the data. In the panel data (N?=?343), four achievement…
Exploratory study on performance measures as indicators of IS effectiveness

NASA Technical Reports Server (NTRS)

Bishop, Peter C.; Yoes, Cissy

1992-01-01

The Information Systems Directorate at JSC/NASA has undertaken the reevaluation of its performance measures process and measures. Under the direction of a quality approach it is essential to identify an external perspective of how well an organization is performing. This study was conducted with two major objectives: (1) survey and summarize the academic literature on performance measures as indicators of information systems (IS) effectiveness; and (2) survey organizations for their experience in measuring for IS effectiveness. Four approaches to measuring the effectiveness of IS performance were identified: (1) listen to the customer for the things they need; (2) align with corporate goals; (3) benchmark against well-respected organizations; and (4) ask yourself what critical factors lead to success. The list of known methods for soliciting customer feedback are as follows: (1) executive visit; (2) survey, interview, and focus group; (3) complaints and compliments; and (4) service level agreements. A common set of characteristics that satisfy customers was identified from the literature. The list includes elements such as the following: accuracy, timeliness, relevance, understandability, reliability, and completeness. Future research in this topic area should prove beneficial to determine the metrics for external validity.
Self-reports of trauma and dissociation: An examination of context effects.

PubMed

Lemons, Peter; Lynn, Steven Jay

2016-08-01

To examine context effects in moderating the link between self-reported trauma and dissociation in undergraduate samples, we administered these measures either in the same or different experimental contexts. Trauma History Screen/THS (Carlson et al., 2011)-Dissociative Experiences Scale/DES-II (Bernstein & Putnam, 1986) correlations revealed a context effect (greater correlations in same test context), although multiple regression analyses did not confirm this finding. A context effect was supported in DES-Taxon scores using multiple regression for the THS but not the Modified Posttraumatic Stress Scale (MPSS-SR; Falsetti, Resnick, Resick, & Kilpatrick, 1993), an effect confirmed with correlation comparisons. Ethnicity influenced the association between measures of trauma and dissociation. Overall, the relation between measures of trauma and dissociation was small to medium, although high correlations were observed between the DES depersonalization/derealization subscale and the Multiscale Dissociation Inventory (Briere, Weathers, & Runtz, 2005) depersonalization and derealization subscales, supporting the construct validity of these measures. Copyright © 2016 Elsevier Inc. All rights reserved.

Optimum electrode configuration selection for electrical resistance change based damage detection in composites using an effective independence measure

NASA Astrophysics Data System (ADS)

Escalona, Luis; Díaz-Montiel, Paulina; Venkataraman, Satchi

2016-04-01

Laminated carbon fiber reinforced polymer (CFRP) composite materials are increasingly used in aerospace structures due to their superior mechanical properties and reduced weight. Assessing the health and integrity of these structures requires non-destructive evaluation (NDE) techniques to detect and measure interlaminar delamination and intralaminar matrix cracking damage. The electrical resistance change (ERC) based NDE technique uses the inherent changes in conductive properties of the composite to characterize internal damage. Several works that have explored the ERC technique have been limited to thin cross-ply laminates with simple linear or circular electrode arrangements. This paper investigates a method of optimum selection of electrode configurations for delamination detection in thick cross-ply laminates using ERC. Inverse identification of damage requires numerical optimization of the measured response with a model predicted response. Here, the electrical voltage field in the CFRP composite laminate is calculated using finite element analysis (FEA) models for different specified delamination size and locations, and location of ground and current electrodes. Reducing the number of sensor locations and measurements is needed to reduce hardware requirements, and computational effort needed for inverse identification. This paper explores the use of effective independence (EI) measure originally proposed for sensor location optimization in experimental vibration modal analysis. The EI measure is used for selecting the minimum set of resistance measurements among all possible combinations of selecting a pair of electrodes among the n electrodes. To enable use of EI to ERC required, it is proposed in this research a singular value decomposition SVD to obtain a spectral representation of the resistance measurements in the laminate. The effectiveness of EI measure in eliminating redundant electrode pairs is demonstrated by performing inverse identification of damage using the full set of resistance measurements and the reduced set of measurements. The investigation shows that the EI measure is effective for optimally selecting the electrode pairs needed for resistance measurements in ERC based damage detection.
Turbulence excited frequency domain damping measurement and truncation effects

NASA Technical Reports Server (NTRS)

Soovere, J.

1976-01-01

Existing frequency domain modal frequency and damping analysis methods are discussed. The effects of truncation in the Laplace and Fourier transform data analysis methods are described. Methods for eliminating truncation errors from measured damping are presented. Implications of truncation effects in fast Fourier transform analysis are discussed. Limited comparison with test data is presented.
A Comparison of Four Approaches to Account for Method Effects in Latent State-Trait Analyses

ERIC Educational Resources Information Center

Geiser, Christian; Lockhart, Ginger

2012-01-01

Latent state-trait (LST) analysis is frequently applied in psychological research to determine the degree to which observed scores reflect stable person-specific effects, effects of situations and/or person-situation interactions, and random measurement error. Most LST applications use multiple repeatedly measured observed variables as indicators…
Tissue dielectric constant and circumference measurement in the follow-up of treatment-related changes in lower-limb lymphedema.

PubMed

Tugral, Alper; Viren, Tuomas; Bakar, Yesim

2018-02-01

Lymphedema of lower limbs is a chronic condition that requires life-long management. Therapeutic effect of complex decongestive physiotherapy (CDP) is most often followed by circumference measurements (CM). However, the CM measurements are not specific to interstitial tissue fluid and have problems in sensitivity and objectivity. The aim of present study was to evaluate the therapeutic effect of CDP with a new tissue water specific measurement technique, in patients with lower limb lymphedema (LLL). A total of 17 patients with unilateral LLL (11 primary, 6 secondary lymphedema) were recruited in this study. CDP was applied for 5 days a week for 4 weeks. CM measurement of both limbs was performed at nine sites along limb by tape measure. Percentage skin water content (PWC) of thigh, calf and ankle was measured in affected lymphedema limb and contralateral limb with MoistureMeterD Compact (MMDC) device. Inter-limb PWC ratio was calculated by dividing affected side's PWC value with PWC of contralateral limb. Patients were asked to fullfill the Lymph Quality of Life Questionnaire. Significant reduction of circumference after CDP was detected at all nine measurement sites along lower limb (P<0.01). PWC measurements showed a significant decrease of skin tissue water at thigh, calf and ankle measurement sites after CDP (P<0.001). Inter-limb PWC ratios demonstrated significant reduction of edema between affected and contraletral limbs post-treatment (P<0.003). CDP also increased the quality of life (P=0.006). CM and PWC measurements reflected a positive effect of CDP in patients with LLL. Both absolute PWC values and inter-limb PWC ratios were meaningful tools to follow the effect of therapautic intervention. Compared with CM measurements the TDC technique offered easier, quicker, objective and more practical measurements for routine assessments of LLL.
Measuring the academic, social, and psychological effects of academic service learning on middle school students

NASA Astrophysics Data System (ADS)

Giacalone, Valarie A.

The purpose of this study was to examine the effects of an academic service learning project on ninth-grade students' science achievement and attitudes. A quasi-experimental, pretest-posttest design was used with four classes of one teacher in a rural school. The treatment was an Energy Fair service project. Two treatment classes that were chosen by random assignment (n = 58) were compared to two control classes (n = 64), who performed an alternative assignment. The Energy Fair was conducted for the elementary school students and on a limited basis for fellow students (peers). The academic effect was measured by a teacher-designed end-of-unit ecology test, with a subset of the questions on energy use. Psychological effects were measured by a self-esteem questionnaire, which measured both self-esteem and the satisfaction felt about one's self-esteem. Social effects were measured by three semantic differentials, one each for "adults," "peers," and "elementary students." The teacher was interviewed regarding her observations about the project. Written reflections from both the treatment and control groups were coded and analyzed. Pretest results were divided into thirds of high, medium, and low for all variables to search for the possibility of an attribute-treatment interaction. Analysis of covariance was used to reduce the possibility of pretest bias, to test for significant effects, and to test for a level by treatment interaction. Although the posttest means favored the experimental group, no statistically significant difference was found for academic results. No significant effect was found for either of the psychological measures. No change was found for the social results regarding "adults." A statistically significant effect was found for social results in the categories of "elementary students" and "peers." No statistically significant level by treatment interaction was found. Further research on the effects of academic service learning projects is needed at the middle school level, in all disciplines, and containing service of a longer duration and intensity.
Interactions measurement payload for Shuttle

NASA Technical Reports Server (NTRS)

Guidice, D. A.; Pike, C. P.

1985-01-01

The Interactions Measurement Payload for Shuttle (IMPS) consisted of engineering experiments to determine the effects of the space environment on projected Air Force space systems. Measurements by IMPS on a polar-orbit Shuttle flight will lead to detailed knowledge of the interaction of the low-altitude polar-auroral environment on materials, equipment and technologies to be used in future large, high-power space systems. The results from the IMPS measurements will provide direct input to MIL-STD design guidelines and test standards that properly account for space-environment effects.
Cooling Effectiveness Measurements for Air Film Cooling of Thermal Barrier Coated Surfaces in a Burner Rig Environment Using Phosphor Thermometry

NASA Technical Reports Server (NTRS)

Eldridge, Jeffrey I.; Shyam, Vikram; Wroblewski, Adam C.; Zhu, Dongming; Cuy, Michael D.; Wolfe, Douglas E.

2016-01-01

While the effects of thermal barrier coating (TBC) thermal protection and air film cooling effectiveness are usually studied separately, their contributions to combined cooling effectiveness are interdependent and are not simply additive. Therefore, combined cooling effectiveness must be measured to achieve an optimum balance between TBC thermal protection and air film cooling. In this investigation, surface temperature mapping was performed using recently developed Cr-doped GdAlO3 phosphor thermometry. Measurements were performed in the NASA GRC Mach 0.3 burner rig on a TBC-coated plate using a scaled up cooling hole geometry where both the mainstream hot gas temperature and the blowing ratio were varied. Procedures for surface temperature and cooling effectiveness mapping of the air film-cooled TBC-coated surface are described. Applications are also shown for an engine component in both the burner rig test environment as well as an engine afterburner environment. The effects of thermal background radiation and flame chemiluminescence on the measurements are investigated, and advantages of this method over infrared thermography as well as the limitations of this method for studying air film cooling are discussed.
Measuring the Effectiveness of Professional Development in Early Literacy: Lessons Learned. PREL Research Brief

ERIC Educational Resources Information Center

Hammond, Ormond

2005-01-01

This Research Brief focuses on the methodology used to measure professional development (PD) effectiveness. It examines the needs that generated this research, what PREL did to meet those needs, and lessons that have been learned as a result. In particular, it discusses the development of a new instrument designed to measure the quality of PD as…
Nonlinearity and pixel shifting effects in HXRG infrared detectors

NASA Astrophysics Data System (ADS)

Plazas, A. A.; Shapiro, C.; Smith, R.; Rhodes, J.; Huff, E.

2017-04-01

We study the nonlinearity (NL) in the conversion from charge to voltage in infrared detectors (HXRG) for use in precision astronomy. We present laboratory measurements of the NL function of a H2RG detector and discuss the accuracy to which it would need to be calibrated in future space missions to perform cosmological measurements through the weak gravitational lensing technique. In addition, we present an analysis of archival data from the infrared H1RG detector of the Wide Field Camera 3 in the Hubble Space Telescope that provides evidence consistent with the existence of a sensor effect analogous to the ``brighter-fatter'' effect found in Charge-Coupled Devices. We propose a model in which this effect could be understood as shifts in the effective pixel boundaries, and discuss prospects of laboratory measurements to fully characterize this effect.
Multiscale measurement error models for aggregated small area health data.

PubMed

Aregay, Mehreteab; Lawson, Andrew B; Faes, Christel; Kirby, Russell S; Carroll, Rachel; Watjou, Kevin

2016-08-01

Spatial data are often aggregated from a finer (smaller) to a coarser (larger) geographical level. The process of data aggregation induces a scaling effect which smoothes the variation in the data. To address the scaling problem, multiscale models that link the convolution models at different scale levels via the shared random effect have been proposed. One of the main goals in aggregated health data is to investigate the relationship between predictors and an outcome at different geographical levels. In this paper, we extend multiscale models to examine whether a predictor effect at a finer level hold true at a coarser level. To adjust for predictor uncertainty due to aggregation, we applied measurement error models in the framework of multiscale approach. To assess the benefit of using multiscale measurement error models, we compare the performance of multiscale models with and without measurement error in both real and simulated data. We found that ignoring the measurement error in multiscale models underestimates the regression coefficient, while it overestimates the variance of the spatially structured random effect. On the other hand, accounting for the measurement error in multiscale models provides a better model fit and unbiased parameter estimates. © The Author(s) 2016.
Thermoelectric power measurement under hydrostatic pressure using a self-clamped pressure cell

NASA Astrophysics Data System (ADS)

Choi, E. S.; Kang, Haeyong; Jo, Y. J.; Kang, W.

2002-08-01

A thermoelectric power (TEP) measurement technique in a self-clamped pressure cell is presented. Thermal and electrical contacts were glued to heaters by Stycast epoxy, which enhances thermal integration. The pressure effect of Chromel-Constantan and Chromel-AuFe0.07% thermocouples are compared to Chromel-Alumel thermocouples, which are known to be pressure insensitive between 4.2 and 300 K. The investigated thermocouples are found to have a small pressure effect; approx][plus-or-minus4% at maximum in the measured temperature and pressure range. Any pressure effect on Au wires was also found to be very small from the pressure-dependent TEP measurement of YBCO superconductor below Tc.
Quantifying the effect of non-Larmor motion of electrons on the pressure tensor

NASA Astrophysics Data System (ADS)

Che, H.; Schiff, C.; Le, G.; Dorelli, J. C.; Giles, B. L.; Moore, T. E.

2018-03-01

In space plasma, various effects of magnetic reconnection and turbulence cause the electron motion to significantly deviate from their Larmor orbits. Collectively these orbits affect the electron velocity distribution function and lead to the appearance of the "non-gyrotropic" elements in the pressure tensor. Quantification of this effect has important applications in space and laboratory plasma, one of which is tracing the electron diffusion region (EDR) of magnetic reconnection in space observations. Three different measures of agyrotropy of pressure tensor have previously been proposed, namely, A ∅ e , Dng, and Q. The multitude of contradictory measures has caused confusion within the community. We revisit the problem by considering the basic properties an agyrotropy measure should have. We show that A ∅ e , Dng, and Q are all defined based on the sum of the principle minors (i.e., the rotation invariant I2) of the pressure tensor. We discuss in detail the problems of I2-based measures and explain why they may produce ambiguous and biased results. We introduce a new measure AG constructed based on the determinant of the pressure tensor (i.e., the rotation invariant I3) which does not suffer from the problems of I2-based measures. We compare AG with other measures in 2- and 3-dimension particle-in-cell magnetic reconnection simulations and show that AG effectively trace the EDR of reconnection in both Harris and force-free current sheets. On the other hand, A ∅ e does not show prominent peaks in the EDR and part of the separatrix in the force-free reconnection simulations, demonstrating that A ∅ e does not measure all the non-gyrotropic effects in this case and is not suitable for studying magnetic reconnection in more general situations other than Harris sheet reconnection.
Diffusion length measurements using the scanning electron microscope. [in semiconductor devices

NASA Technical Reports Server (NTRS)

Weizer, V. G.

1975-01-01

A measurement technique employing the scanning electron microscope is described in which values of the true bulk diffusion length are obtained. It is shown that surface recombination effects can be eliminated through the application of highly doped surface field layers. The influence of high injection level effects and low-high junction current generation on the resulting measurement was investigated. Close agreement is found between the diffusion lengths measured by this method and those obtained using a penetrating radiation technique.
[The validation of the effect of correcting spectral background changes based on floating reference method by simulation].

PubMed

Wang, Zhu-lou; Zhang, Wan-jie; Li, Chen-xi; Chen, Wen-liang; Xu, Ke-xin

2015-02-01

There are some challenges in near-infrared non-invasive blood glucose measurement, such as the low signal to noise ratio of instrument, the unstable measurement conditions, the unpredictable and irregular changes of the measured object, and etc. Therefore, it is difficult to extract the information of blood glucose concentrations from the complicated signals accurately. Reference measurement method is usually considered to be used to eliminate the effect of background changes. But there is no reference substance which changes synchronously with the anylate. After many years of research, our research group has proposed the floating reference method, which is succeeded in eliminating the spectral effects induced by the instrument drifts and the measured object's background variations. But our studies indicate that the reference-point will changes following the changing of measurement location and wavelength. Therefore, the effects of floating reference method should be verified comprehensively. In this paper, keeping things simple, the Monte Carlo simulation employing Intralipid solution with the concentrations of 5% and 10% is performed to verify the effect of floating reference method used into eliminating the consequences of the light source drift. And the light source drift is introduced through varying the incident photon number. The effectiveness of the floating reference method with corresponding reference-points at different wavelengths in eliminating the variations of the light source drift is estimated. The comparison of the prediction abilities of the calibration models with and without using this method shows that the RMSEPs of the method are decreased by about 98.57% (5%Intralipid)and 99.36% (10% Intralipid)for different Intralipid. The results indicate that the floating reference method has obvious effect in eliminating the background changes.
How Teacher Evaluation Methods Matter for Accountability: A Comparative Analysis of Teacher Effectiveness Ratings by Principals and Teacher Value-Added Measures

ERIC Educational Resources Information Center

Harris, Douglas N.; Ingle, William K.; Rutledge, Stacey A.

2014-01-01

Policymakers are revolutionizing teacher evaluation by attaching greater stakes to student test scores and observation-based teacher effectiveness measures, but relatively little is known about why they often differ so much. Quantitative analysis of thirty schools suggests that teacher value-added measures and informal principal evaluations are…
VAPOR PRESSURE ISOTOPE EFFECTS IN THE MEASUREMENT OF ENVIRONMENTAL TRITIUM SAMPLES.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhne, W.

2012-12-03

Standard procedures for the measurement of tritium in water samples often require distillation of an appropriate sample aliquot. This distillation process may result in a fractionation of tritiated water and regular light water due to the vapor pressure isotope effect, introducing either a bias or an additional contribution to the total tritium measurement uncertainty. The magnitude of the vapor pressure isotope effect is characterized as functions of the amount of water distilled from the sample aliquot and the heat settings for the distillation process. The tritium concentration in the distillate is higher than the tritium concentration in the sample earlymore » in the distillation process, it then sharply decreases due to the vapor pressure isotope effect and becomes lower than the tritium concentration in the sample, until the high tritium concentration retained in the boiling flask is evaporated at the end of the process. At that time, the tritium concentration in the distillate again overestimates the sample tritium concentration. The vapor pressure isotope effect is more pronounced the slower the evaporation and distillation process is conducted; a lower heat setting during the evaporation of the sample results in a larger bias in the tritium measurement. The experimental setup used and the fact that the current study allowed for an investigation of the relative change in vapor pressure isotope effect in the course of the distillation process distinguish it from and extend previously published measurements. The separation factor as a quantitative measure of the vapor pressure isotope effect is found to assume values of 1.034 {+-} 0.033, 1.052 {+-} 0.025, and 1.066 {+-} 0.037, depending on the vigor of the boiling process during distillation of the sample. A lower heat setting in the experimental setup, and therefore a less vigorous boiling process, results in a larger value for the separation factor. For a tritium measurement in water samples, this implies that the tritium concentration could be underestimated by 3 - 6%.« less
Evaluation of three ergonomic measures on productivity, physical work demands, and workload in gypsum bricklayers.

PubMed

van der Molen, Henk F; Kuijer, P Paul F M; Formanoy, Margriet; Bron, Lennart; Hoozemans, Marco J M; Visser, Bart; Frings-Dresen, Monique H W

2010-06-01

This study evaluated the effects of a combination of three ergonomic measures designed to reduce the risk of low back complaints among gypsum bricklayers. The measures focused on optimizing working height and reducing carrying distances. A within-subjects (N = 10) controlled field study was used to compare the effects of working with the ergonomic measures with those of working with conventional working methods at the worksite during the course of a full working day. Productivity, work demands, and workload were assessed. No effects were found on productivity, total work time, duration of tasks, duration of carrying, or energetic or biomechanical workload. However, the duration and frequency of working between knee and hip height during a working day increased by 25% and 15%, respectively, due to the ergonomic measures. During the finishing task, the duration and frequency of working below knee level decreased significantly by 4 min and 71 times, respectively. The limited impact of the ergonomic measures argues for additional measures to reduce the risk of low back complaints. 2010 Wiley-Liss, Inc.
The effects of Chinese calligraphy handwriting and relaxation training in Chinese Nasopharyngeal Carcinoma patients: a randomized controlled trial.

PubMed

Yang, Xue-Ling; Li, Huan-Huan; Hong, Ming-Huang; Kao, Henry S R

2010-05-01

Chinese calligraphy handwriting is the practice of traditional Chinese brush writing, researches found calligraphy had therapeutic effects on certain diseases, some authors argued that calligraphy might have relaxation effect. This study was to compare the effects of calligraphy handwriting with those of progressive muscle relaxation and imagery training in Chinese Nasopharyngeal Carcinoma patients. This study was a randomized controlled trial. Two hundred and eighty-seven Nasopharyngeal Carcinoma patients were approached, ninety (31%) patients were recruited and randomized to one of the three treatment groups: progressive muscle relaxation and guided imagery training group, Calligraphy handwriting group, or a Control group. Seventy-nine (87.8%) completed all of the outcome measures. The primary treatment outcome was the changes of physiological arousal parameters measured by pre- and post-treatment differences of heart rate, blood pressure and respiration rate. The secondary outcomes included: modified Chinese version of Symptom Distress Scale, Profile of Mood State-Short Form, and Karnofsky Performance Status measured at baseline, during treatment (after the 2-week intervention), post-treatment (after the 4-week intervention) and after a 2-week follow-up. Effectiveness was tested by repeated measure ANOVA analyses. Cancer centre of a major university hospital in Guangdong, China. Results showed that both of calligraphy and relaxation training demonstrated slow-down effects on physiological arousal parameters. Moreover, calligraphy practice gradually lowered participants' systolic blood pressure (simple main effect of time at pre-treatment measure, p=.007) and respiration rate (p=.000) at pre- and post-treatment measures as the intervention proceeded, though with a smaller effect size as compared to relaxation. Both of calligraphy and relaxation training had certain symptom relief and mood improvement effects in NPC patients. Relaxation was effective in relieving symptom of insomnia (p=.042) and improving mood disturbance, calligraphy elevated level of concentration (p=.032) and improved mood disturbance. Similar to the effects of relaxation training, calligraphy demonstrated a gradually build-up physiological slow-down, and associated with heightened concentration and improved mood disturbance. Calligraphy offered a promising approach to improved health in cancer patients. Copyright 2009 Elsevier Ltd. All rights reserved.
An orientation measurement method based on Hall-effect sensors for permanent magnet spherical actuators with 3D magnet array.

PubMed

Yan, Liang; Zhu, Bo; Jiao, Zongxia; Chen, Chin-Yin; Chen, I-Ming

2014-10-24

An orientation measurement method based on Hall-effect sensors is proposed for permanent magnet (PM) spherical actuators with three-dimensional (3D) magnet array. As there is no contact between the measurement system and the rotor, this method could effectively avoid friction torque and additional inertial moment existing in conventional approaches. Curved surface fitting method based on exponential approximation is proposed to formulate the magnetic field distribution in 3D space. The comparison with conventional modeling method shows that it helps to improve the model accuracy. The Hall-effect sensors are distributed around the rotor with PM poles to detect the flux density at different points, and thus the rotor orientation can be computed from the measured results and analytical models. Experiments have been conducted on the developed research prototype of the spherical actuator to validate the accuracy of the analytical equations relating the rotor orientation and the value of magnetic flux density. The experimental results show that the proposed method can measure the rotor orientation precisely, and the measurement accuracy could be improved by the novel 3D magnet array. The study result could be used for real-time motion control of PM spherical actuators.
Anticholinesterase Effect on Motor Kinematic Measures and Brain Activation in Parkinson’s Disease

PubMed Central

Mentis, Marc J.; Delalot, Dominique; Naqvi, Hassan; Gordon, Mark F.; Gudesblatt, Mark; Edwards, Christine; Donatelli, Luke; Dhawan, Vijay; Eidelberg, David

2015-01-01

Anticholinesterase (AChE) drugs are being prescribed off label for nonmotor symptoms in Parkinson’s disease (PD). Theoretically, these drugs can impair motor function. A small literature suggests AChE therapy has little effect on clinical motor evaluation; however, no study has made objective motor kinematic measures or evaluated brain function. We hypothesized that even if clinical examination was normal in PD patients on dopamine therapy, (1) sensitive kinematic measures would be abnormal during AChE therapy or (2) normal kinematic measures would be maintained by compensatory brain activation. We carried out a randomized, double-blind, placebo-controlled trial of 8 weeks donepezil (10 mg/day) in 17 PD subjects. Subjects carried out a computerized motor task during a positron emission tomography (PET) scan before starting the drug and again after 8 weeks of donepezil or placebo. Kinematic measures of motor function and PET scans were analyzed to compare the effects of donepezil and placebo. Neither placebo nor donepezil altered motor kinematic measures. Furthermore, movement integrity while on donepezil was maintained without compensatory brain activity. Donepezil 10 mg/day can be given for nonmotor symptoms in PD without adverse motor effects or compensatory brain activity. PMID:16228997

The Effect of Microphone Type on Acoustical Measures of Synthesized Vowels.

PubMed

Kisenwether, Jessica Sofranko; Sataloff, Robert T

2015-09-01

The purpose of this study was to compare microphones of different directionality, transducer type, and cost, with attention to their effects on acoustical measurements of period perturbation, amplitude perturbation, and noise using synthesized sustained vowel samples. This was a repeated measures design. Synthesized sustained vowel stimuli (with known acoustic characteristics and systematic changes in jitter, shimmer, and noise-to-harmonics ratio) were recorded by a variety of dynamic and condenser microphones. Files were then analyzed for mean fundamental frequency (fo), fo standard deviation, absolute jitter, shimmer in dB, peak-to-peak amplitude variation, and noise-to-harmonics ratio. Acoustical measures following recording were compared with the synthesized, known acoustical measures before recording. Although informal analyses showed some differences among microphones, and analyses of variance showed that type of microphone is a significant predictor, t-tests revealed that none of the microphones generated different means compared with the generated acoustical measures. In this sample, microphone type, directionality, and cost did not have a significant effect on the validity of acoustic measures. Copyright © 2015 The Voice Foundation. Published by Elsevier Inc. All rights reserved.
Modulation infrared thermometry of caloric effects at up to kHz frequencies

NASA Astrophysics Data System (ADS)

Döntgen, Jago; Rudolph, Jörg; Waske, Anja; Hägele, Daniel

2018-03-01

We present a novel non-contact method for the direct measurement of caloric effects in low volume samples. The adiabatic temperature change ΔT of a magnetocaloric sample is very sensitively determined from thermal radiation. Rapid modulation of ΔT is induced by an oscillating external magnetic field. Detection of thermal radiation with a mercury-cadmium-telluride detector allows for measurements at field frequencies exceeding 1 kHz. In contrast to thermoacoustic methods, our method can be employed in vacuum which enhances adiabatic conditions especially in the case of small volume samples. Systematic measurements of the magnetocaloric effect as a function of temperature, magnetic field amplitude, and modulation frequency give a detailed picture of the thermal behavior of the sample. Highly sensitive measurements of the magnetocaloric effect are demonstrated on a 2 mm thick sample of gadolinium and a 60 μm thick Fe80B12Nb8 ribbon.
Radiative effects of the El Chichon volcanic eruption. Preliminary results concerning remote sensing

NASA Technical Reports Server (NTRS)

Bandeen, W. R.; Fraser, R. S.

1982-01-01

The aerosols and gases resulting from the El Chichon volcanic eruption had, and may still have, significant effects on satellite measurements of the properties of the Earth's atmosphere. The sea surface temperature measured by the AVHRR was biased up to -2.5 C for many months. The total amount of ozone derived from TOMS with a standard algorithm was greatly in excess of the possible value. This apparent excess can now be explained in terms of additional absorption by SO2. Infrared temperature sounders have observed both positive and negative anomalies. These effects and others on many satellite measurements are addressed following a discussion of the history and composition of the ejecta remaining in the stratosphere. Finally, recommendations are made for further study to account for the effects of volcanic eruptions on satellite observations and for use of such observations to measure the characteristics of the ejecta.
Neighbour-die effect on the measurement of wafer-level flip-chip LED dies in production lines

NASA Astrophysics Data System (ADS)

Chen, Tengfei; Wan, Zirui; Li, Bin

2017-11-01

The light from the side surfaces of the test flip-chip light-emitting diode (FCLED) dies is reflected, refracted or absorbed by neighbour dies during the measurement of wafer-level FCLED dies in production lines. A notable measurement deviation is caused by the neighbour-die effect, which is not considered in current industry practice. In this paper, Monte Carlo ray-tracing simulations are used to study the measurement deviations caused by the neighbour-die effect and extension ratios of the film. The simulation results show that the maximal deviation of radiant flux impinging the photodiode can reach 5.5%, if the die is tested without any neighbour dies, or is surrounded by a set of neighbour dies at an extension ratio of 1.1. Moreover, the dependence between the measurement results and neighbour cases for different extension ratios is also investigated. Then, a modified calibration method is proposed and studied. The proposed technique can be used to improve the calibration and measurement accuracy of the test equipment used for measurement of wafer-level FCLED dies in production lines.
The method for measuring the groove density of variable-line-space gratings with elimination of the eccentricity effect

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Qingbo; Liu, Zhengkun, E-mail: zhkliu@ustc.edu.cn; Chen, Huoyao

2015-02-15

To eliminate the eccentricity effect, a new method for measuring the groove density of a variable-line-space grating was adapted. Based on grating equation, groove density is calculated by measuring the internal angles between zeroth-order and first-order diffracted light for two different wavelengths with the same angle of incidence. The measurement system mainly includes two laser sources, a phase plate, plane mirror, and charge coupled device. The measurement results of a variable-line-space grating demonstrate that the experiment data agree well with theoretical values, and the value of measurement error (ΔN/N) is less than 2.72 × 10{sup −4}.
Detailed Uncertainty Analysis of the ZEM-3 Measurement System

NASA Technical Reports Server (NTRS)

Mackey, Jon; Sehirlioglu, Alp; Dynys, Fred

2014-01-01

The measurement of Seebeck coefficient and electrical resistivity are critical to the investigation of all thermoelectric systems. Therefore, it stands that the measurement uncertainty must be well understood to report ZT values which are accurate and trustworthy. A detailed uncertainty analysis of the ZEM-3 measurement system has been performed. The uncertainty analysis calculates error in the electrical resistivity measurement as a result of sample geometry tolerance, probe geometry tolerance, statistical error, and multi-meter uncertainty. The uncertainty on Seebeck coefficient includes probe wire correction factors, statistical error, multi-meter uncertainty, and most importantly the cold-finger effect. The cold-finger effect plagues all potentiometric (four-probe) Seebeck measurement systems, as heat parasitically transfers through thermocouple probes. The effect leads to an asymmetric over-estimation of the Seebeck coefficient. A thermal finite element analysis allows for quantification of the phenomenon, and provides an estimate on the uncertainty of the Seebeck coefficient. The thermoelectric power factor has been found to have an uncertainty of +9-14 at high temperature and 9 near room temperature.
Effectiveness Of Miraba an Indigenous Soil and Water Conservation Measures On Reducing Runoff And Soil Loss In Arable Land Of Western Usambara Mountains

NASA Astrophysics Data System (ADS)

Msita, H. B.; Kimaro, D. N.; Mtakwa, P. W.; Msanya, B. M.; Dondyene, S.; Poesen, J.; Deckers, J.

2012-04-01

Soil erosion by water is rampant mainly in mountainous areas of Tanzania leading to environmental hazards, low land productivity, low income and increased poverty. Despite the severity of the soil erosion problem, there is not much quantitative data on the erosion effects and effectiveness of indigenous soil and water conservation (SWC) measures. The consequence is that indigenous knowledge in SWC planning is ignored. The on-farm field experiment was conducted for three years in Migambo village, Lushoto district in Tanzania, to determine the effectiveness of improved Miraba (IM) an indigenous soil erosion control measure on reducing runoff and soil loss. Management practices were tested viz: control that is without any soil conservation measure (C), Miraba alone (M), Miraba with farmyard manure and mulching (MFM) replicated three times in CRD setting. Maize (Zea mays) and beans (Phaseolus vulgaris) were used as test crops, due to their importance as food crops and the high erosion rates on fields with these crops. The crops were planted in rotation, maize and beans in short and long rains respectively. Gerlach troughs and runoff plots were used to evaluate the physical effectiveness. Results show significant effects of IM against control on crop yields, soil loss, surface runoff and moisture retention. MFM is the most effective measure in reducing soil and water losses followed by MF and M. The results further showed that these management practices can be implemented to reduce soil erosion and nutrient losses in the study area and areas with similar ecological setting. To facilitate adoption of these practices further research works is recommended for identifying economically feasible indigenous SWC measures under different biophysical and socio-economic conditions.
Effects of bupropion on simulated demand for cigarettes and the subjective effects of smoking.

PubMed

Madden, Gregory J; Kalman, David

2010-04-01

The biobehavioral mechanism(s) mediating bupropion's efficacy are not well understood. Behavioral economic measures such as demand curves have proven useful in investigations of the reinforcing effects of drugs of abuse. Behavioral economic measures may also be used to measure the effect of pharmacotherapies on the reinforcing effects of drugs of abuse. The effects of bupropion on simulated demand for cigarettes were investigated in a placebo-controlled double-blind clinical trial. Participants reported the number of cigarettes they would purchase and consume in a single day at a range of prices. The effects of medication on the subjective effects of smoking were also explored. Demand for cigarettes was well described by an exponential demand equation. Bupropion did not significantly decrease the maximum number of cigarettes that participants said they would smoke in a single day nor did it significantly alter the relation between price per cigarette and demand. Baseline demand elasticity did not predict smoking cessation, but changes in elasticity following 1 week of treatment did. Medication group had no effect on any subjective effects of smoking. Bupropion had no significant effects on demand for cigarettes. The exponential demand equation, recently introduced in behavioral economics, proved amenable to human simulated demand and might be usefully employed in other pharmacotherapy studies as it provides a potentially useful measure of changes in the essential value of the drug as a reinforcer. Such changes may be useful in predicting the efficacy of medications designed to reduce drug consumption.
ϕ Meson Measurements at RHIC with the PHENIX Detector

NASA Astrophysics Data System (ADS)

Sarsour, Murad

2018-02-01

The measurement of ϕ mesons provides key information on the phase of the hot and dense medium created in the relativistic heavy ion collisions. It has a relatively small hadronic interaction cross section and is sensitive to the increase of strangeness (strangeness enhancement), a phenomenon associated with soft particles in bulk matter. Measurements in the dilepton channels are especially interesting since leptons interact only electromagnetically, thus carrying the information from their production phase directly to the detector. Measurements in different nucleus-nucleus collisions allow us to perform a systematic study of the nuclear medium effects on ϕ meson production. The PHENIX detector provides the capabilities to measure the ϕ meson production in a wide range of transverse momentum and rapidity to study these effects. In this proceeding, we present measurements of the ϕ mesons in a variety of collision systems at = 200 GeV. In case of small systems, the data are compared with AMPT calculations to study the various cold nuclear medium effects involved in ϕ meson production.
The impact of frequency and duration of air quality monitoring: Atlanta, GA, data modeling of air pollution and mortality.

PubMed

Klemm, Rebecca J; Thomas, Eddie L; Wyzga, Ronald E

2011-11-01

The purpose of this analysis is threefold. We first examine the extent to which a longer series of data improves our understanding of air pollution on human mortality in the Atlanta, GA, area by updating the findings presented in Klemm and Mason (J. Air Waste Manage. Assoc. 2000, 50, 1433-1439) and Klemm et al. (Inhal. Toxicol. 2004, 16 (Suppl 1), 131-141) with 7.5 additional years of data. We explore estimated effects on two age groups (<65 and 65+) and four categories of cause of death. Second, we investigate how enlarging the geographic area of inquiry influences the estimated effects. Third, because some air quality (AQ) measures are monitored less frequently than daily, we investigate the extent to which AQ measurement frequency can influence estimates of relationships with human mortality. Our analytical approach employs a Poisson regression model using generalized linear modeling in S-Plus to estimate the relationship between daily AQ measures and daily mortality counts. We show that the estimated effects and their associated t values vary by year for nine AQ measures (particulate matter with aerodynamic diameter < or =2.5 microm [PM2.5], elemental carbon [EC], organic carbon [OC], NO3, SO4, O3, NO2, CO, and SO2). Several of the estimated AQ effects show downward trends during the 9-year period of study. The estimated effects tend to be strongest for the AQ measurement during the day of death and tend to decrease with additional lags. Enlarging the geographic area from two to four counties in the metropolitan area decreased the estimated effects, perhaps partly due to the fact that the measurement site is located in one of the two original counties. Estimated effects utilizing data as if the AQ were only measured every 3rd or every 6th day each week or twice per week vary from lower to higher than that estimated with daily measurements, although the t values are lower, as expected.
Effects of solar radiation on glass

NASA Technical Reports Server (NTRS)

Tucker, Dennis S.; Kinser, Donald L.

1991-01-01

The effects of solar radiation of selected glasses are reported. Optical property degradation is studied using UV-Vis spectrophotometry. Strength changes are measured using a concentric ring bend test. Direct fracture toughness measurements using an indentation test are planned.
Installation effects on propeller wake/vortex induced structure-borne noise transmission

NASA Technical Reports Server (NTRS)

Unruh, J. F.

1989-01-01

A laboratory-based test apparatus was employed to investigate the effects of power-plant placement, engine/nacelle mass installation, and wing-to-fuselage attachment methods on propeller-induced structure-borne noise (SBN) transmission levels and their effects on noise-control measures. Data are presented showing SBN transmission is insensitive to propeller spanwise placement, however some sensitivity is seen in propeller-to-wing spacing. Installation of an engine/nacelle mass and variation in wing-to-fuselage attachments have measurable influences on SBN transmission and control measures.
Pilot-Assisted Inertial Navigation System Aiding Using Bearings-Only Measurements Taken Over Time

DTIC Science & Technology

2015-03-26

δψ̇ ≈ −ω(n)in ×ψ + δω (n) in −Cnb δω (b) ib (11) Velocity error equation dynamics are expressed as Equation (12). Where the Coriolis effect comes into...navigation were effectively neglected due to the accuracy and technology development associated with GPS integration. The dependence on GPS was driven by the...bearing measurements used are more effective with high Signal-to-Noise Ratio (SNR) Line of Sight (LOS) measurements in a low Geometric Dilution of
Decoding carotid pressure waveforms recorded by laser Doppler vibrometry: Effects of rebreathing

NASA Astrophysics Data System (ADS)

Casaccia, Sara; Sirevaag, Erik J.; Richter, Edward; O'Sullivan, Joseph A.; Scalise, Lorenzo; Rohrbaugh, John W.

2014-05-01

The principal goal of this study was to assess the capability of the laser Doppler vibrometry (LDV) method for assessing cardiovascular activity. A rebreathing task was used to provoke changes within individuals in cardiac and vascular performance. The rebreathing task is known to produce multiple effects, associated with changes in autonomic drive as well as alterations in blood gases. The rise in CO2 (hypercapnia), in particular, produces changes in the cerebral and systemic circulation. The results from a rebreathing task (involving rebreathing the same air in a rubber bag) are presented for 35 individuals. The LDV pulse was measured from a site overlying the carotid artery. For comparison and validation purposes, several conventional measures of cardiovascular function were also obtained, with an emphasis on the electrocardiogram (ECG), continuous blood pressure (BP) from the radial artery, and measures of myocardial performance using impedance cardiography (ICG). During periods of active rebreathing, ventilation increased. The conventional cardiovascular effects included increased mean arterial BP and systemic vascular resistance, and decreased cardiac stroke volume (SV) and pulse transit time (PTT). These effects were consistent with a pattern of α-adrenergic stimulation. During the immediate post-rebreathing segments, in contrast, mean BP was largely unaffected but pulse BP increased, as did PTT and SV, whereas systemic vascular resistance decreased-a pattern consistent with β-adrenergic effects in combination with the direct effects of hypercapnia on the vascular system. Measures of cardiovascular activity derived from the LDV pulse velocity and displacement waveforms revealed patterns of changes that mirrored the results obtained using conventional measures. In particular, the ratio of the maximum early peak in the LDV velocity pulse to the maximum amplitude of the LDV displacement pulse (in an early systolic interval) closely mirrored the conventional SV effects. Additionally, changes in an augmentation ratio (computed as the maximum amplitude of the LDV displacement pulse during systole / amplitude at the end of the incident wave) were very similar to changes in systemic vascular resistance. Heart rates measured from the ECG and LDV were nearly identical. These preliminary results suggest that measures derived using the non-contact LDV technique can provide surrogate measures for those obtained using impedance cardiography.
Effects of Sample Preparation on the Infrared Reflectance Spectra of Powders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brauer, Carolyn S.; Johnson, Timothy J.; Myers, Tanya L.

2015-05-22

While reflectance spectroscopy is a useful tool in identifying molecular compounds, laboratory measurement of solid (particularly powder) samples often is confounded by sample preparation methods. For example, both the packing density and surface roughness can have an effect on the quantitative reflectance spectra of powdered samples. Recent efforts in our group have focused on developing standard methods for measuring reflectance spectra that accounts for sample preparation, as well as other factors such as particle size and provenance. In this work, the effect of preparation method on sample reflectivity was investigated by measuring the directional-hemispherical spectra of samples that were hand-packedmore » as well as pressed into pellets using an integrating sphere attached to a Fourier transform infrared spectrometer. The results show that the methods used to prepare the sample have a substantial effect on the measured reflectance spectra, as do other factors such as particle size.« less
Effects of sample preparation on the infrared reflectance spectra of powders

NASA Astrophysics Data System (ADS)

Brauer, Carolyn S.; Johnson, Timothy J.; Myers, Tanya L.; Su, Yin-Fong; Blake, Thomas A.; Forland, Brenda M.

2015-05-01

While reflectance spectroscopy is a useful tool for identifying molecular compounds, laboratory measurement of solid (particularly powder) samples often is confounded by sample preparation methods. For example, both the packing density and surface roughness can have an effect on the quantitative reflectance spectra of powdered samples. Recent efforts in our group have focused on developing standard methods for measuring reflectance spectra that accounts for sample preparation, as well as other factors such as particle size and provenance. In this work, the effect of preparation method on sample reflectivity was investigated by measuring the directional-hemispherical spectra of samples that were hand-loaded as well as pressed into pellets using an integrating sphere attached to a Fourier transform infrared spectrometer. The results show that the methods used to prepare the sample can have a substantial effect on the measured reflectance spectra, as do other factors such as particle size.
Effect of a grounded object on radon measurement using AlphaGUARD.

PubMed

Ichitsubo, Hirokazu; Yamada, Yuji

2004-07-01

ABSTRACT-: The effects on radon concentration measurement of a grounded object near the opening of a cylindrical ionization chamber were studied using AlphaGUARD. AlphaGUARD comes with a flow measurement adapter that fits on the front of the AlphaGUARD ionization chamber. If the adapter nozzle is grounded, the radon concentration is falsely measured at 0 Bq m. A metal connector for use between the AlphaGUARD and the air duct wall was manufactured in our laboratory. When the connector is grounded, the radon concentration is again falsely measured as 0 Bq m. If the nozzle or connector is ungrounded, the AlphaGUARD measures radon concentration accurately. Health Phys.
Accounting for the various contributions to pyroelectricity in lead zirconate titanate thin films

NASA Astrophysics Data System (ADS)

Hanrahan, B.; Espinal, Y.; Neville, C.; Rudy, R.; Rivas, M.; Smith, A.; Kesim, M. T.; Alpay, S. P.

2018-03-01

An understanding of the pyroelectric coefficient and particularly its relationship with the applied electric field is critical to predicting the device performance for infrared imaging, energy harvesting, and solid-state cooling devices. In this work, we compare direct measurements of the pyroelectric effect under pulsed heating to the indirect extraction of the pyroelectric coefficient from adiabatic hysteresis loops and predictions from Landau-Devonshire theory for PbZr0.52Ti0.48O3 (PZT 52/48) on platinized silicon substrates. The differences between these measurements are explained through a series of careful measurements that quantify the magnitude and direction of the secondary and field-induced pyroelectric effects. The indirect measurement is shown to be up to 25% of the direct measurement at high fields, while the direct measurements and theoretical predictions converge at high fields as the film approaches a mono-domain state. These measurements highlight the importance of directly measuring the pyroelectric response in thin films, where non-intrinsic effects can be a significant proportion of the total observed pyroelectricity. Material and operating conditions are also discussed which could simultaneously maximize all contributions to pyroelectricity.
Beyond relevance and recall: testing new user-centred measures of database performance.

PubMed

Stokes, Peter; Foster, Allen; Urquhart, Christine

2009-09-01

Measures of the effectiveness of databases have traditionally focused on recall, precision, with some debate on how relevance can be assessed, and by whom. New measures of database performance are required when users are familiar with search engines, and expect full text availability. This research ascertained which of four bibliographic databases (BNI, CINAHL, MEDLINE and EMBASE) could be considered most useful to nursing and midwifery students searching for information for an undergraduate dissertation. Searches on title were performed for dissertation topics supplied by nursing students (n = 9), who made the relevance judgements. Measures of recall and precision were combined with additional factors to provide measures of effectiveness, while efficiency combined measures of novelty and originality and accessibility combined measures for availability and retrievability, based on obtainability. There were significant differences among the databases in precision, originality and availability, but other differences were not significant (Friedman test). Odds ratio tests indicated that BNI, followed by CINAHL were the most effective, CINAHL the most efficient, and BNI the most accessible. The methodology could help library services in purchase decisions as the measure for accessibility, and odds ratio testing helped to differentiate database performance.
Reliability of upper and lower extremity anthropometric measurements and the effect on tissue mass predictions.

PubMed

Burkhart, Timothy A; Arthurs, Katherine L; Andrews, David M

2008-01-01

Accurate modeling of soft tissue motion effects relative to bone during impact requires knowledge of the mass of soft and rigid tissues in living people. Holmes et al., [2005. Predicting in vivo soft tissue masses of the lower extremity using segment anthropometric measures and DXA. Journal of Applied Biomechanics, 21, 371-382] developed and validated regression equations to predict the individual tissue masses of lower extremity segments of young healthy adults, based on simple anthropometric measurements. However, the reliability of these measurements and the effect on predicted tissue mass estimates from the equations has yet to be determined. In the current study, two measurers were responsible for collecting two sets of unilateral measurements (25 male and 25 female subjects) for the right upper and lower extremities. These included 6 lengths, 6 circumferences, 8 breadths, and 4 skinfold thicknesses. Significant differences were found between measurers and between sexes, but these differences were relatively small in general (75-80% of between-measurer differences were <1cm). Within-measurer measurement differences were smaller and more consistent than those between measurers in most cases. Good to excellent reliability was demonstrated for all measurement types, with intra-class correlation coefficients of 0.79, 0.86, 0.85 and 0.86 for lengths, circumferences, breadth and skinfolds, respectively. Predicted tissue mass magnitudes were moderately affected by the measurement differences. The maximum mean errors between measurers ranged from 3.2% to 24.2% for bone mineral content and fat mass, for the leg and foot, and the leg segments, respectively.

Comparative Effectiveness of Alternative Administrative Structures. Final Report on a Pilot Investigation. Programme on Institutional Management in Higher Education.

ERIC Educational Resources Information Center

Rivett, B. H. P.; And Others

Initial objectives of this pilot study were to: define the effectiveness and structure of administration in institutions of higher education; explore and identify measures of administrative effectiveness and structure; test the practicability of such definitions and measures against on-going processes at Sussex University; direct, coordinate, and…
Development of Porosity Measurement Method in Shale Gas Reservoir Rock

NASA Astrophysics Data System (ADS)

Siswandani, Alita; Nurhandoko, BagusEndar B.

2016-08-01

The pore scales have impacts on transport mechanisms in shale gas reservoirs. In this research, digital helium porosity meter is used for porosity measurement by considering real condition. Accordingly it is necessary to obtain a good approximation for gas filled porosity. Shale has the typical effective porosity that is changing as a function of time. Effective porosity values for three different shale rocks are analyzed by this proposed measurement. We develop the new measurement method for characterizing porosity phenomena in shale gas as a time function by measuring porosity in a range of minutes using digital helium porosity meter. The porosity of shale rock measured in this experiment are free gas and adsorbed gas porosoty. The pressure change in time shows that porosity of shale contains at least two type porosities: macro scale porosity (fracture porosity) and fine scale porosity (nano scale porosity). We present the estimation of effective porosity values by considering Boyle-Gay Lussaac approximation and Van der Waals approximation.
Quantitative measurements of in-cylinder gas composition in a controlled auto-ignition combustion engine

NASA Astrophysics Data System (ADS)

Zhao, H.; Zhang, S.

2008-01-01

One of the most effective means to achieve controlled auto-ignition (CAI) combustion in a gasoline engine is by the residual gas trapping method. The amount of residual gas and mixture composition have significant effects on the subsequent combustion process and engine emissions. In order to obtain quantitative measurements of in-cylinder residual gas concentration and air/fuel ratio, a spontaneous Raman scattering (SRS) system has been developed recently. The optimized optical SRS setups are presented and discussed. The temperature effect on the SRS measurement is considered and a method has been developed to correct for the overestimated values due to the temperature effect. Simultaneous measurements of O2, H2O, CO2 and fuel were obtained throughout the intake, compression, combustion and expansion strokes. It shows that the SRS can provide valuable data on this process in a CAI combustion engine.
Global statistics of liquid water content and effective number density of water clouds over ocean derived from combined CALIPSO and MODIS measurements

NASA Astrophysics Data System (ADS)

Hu, Y.; Vaughan, M.; McClain, C.; Behrenfeld, M.; Maring, H.; Anderson, D.; Sun-Mack, S.; Flittner, D.; Huang, J.; Wielicki, B.; Minnis, P.; Weimer, C.; Trepte, C.; Kuehn, R.

2007-03-01

This study presents an empirical relation that links layer integrated depolarization ratios, the extinction coefficients, and effective radii of water clouds, based on Monte Carlo simulations of CALIPSO lidar observations. Combined with cloud effective radius retrieved from MODIS, cloud liquid water content and effective number density of water clouds are estimated from CALIPSO lidar depolarization measurements in this study. Global statistics of the cloud liquid water content and effective number density are presented.
Activities of Combined Sewer Overflows: A Comparison of Measured and Computed Data

NASA Astrophysics Data System (ADS)

Ostrowski, M. W.; Koch, J.; Wetzstein, A.

In order to relieve sewerage systems of excess stormwaters during heavy rainfalls overflow structures are necessary for a safe operation of urban drainage and wastew- ater treatment facilities. Overflow tanks have storage effects while pure overflows di- vide the discharges and route the excess water in the next watercourse. The outflows from combined sewage overflows can evoke significant effects on the receiving waters. Hydraulic effects ("hydraulic stress") result from the additional discharges, which are generally introduced at a single point. Toxic effects are caused by the pollutant load of the decanted discharges. In awareness of these effects an immission based consid- eration is required. The lack of reliable, measurement based data is obvious, although the generally accepted necessity of those is noted in recent research projects and regu- lations of public authorities. An immission based view necessitates data regarding the amount, number and duration of the overflows. Particularly with regard to the storm overflows this data is mostly achieved by means of computational simulations. The lack of measured data is the consequence of the adverse conditions in sewer pipes and the complex hydraulic situation at the overflow structures. Reliable data is necessary for the verification, the validation and the improvement of hydrological models. Within the scope of a research project, carried out in the section for Hydrology and Water Management of the Technical University of Darmstadt, a storm overflow was equipped with measuring devices. Aims of the investigations were to discover the limiting boundary conditions in measuring sewer discharges and to record reliable data, concerning the overflow activities of the observed structure. The measured data should be compared with the results of the model SMUSI, which is an evaluation model of the public authorities in the federal state of Hesse, Germany. It is the objective of the presentation to - specify the implementation and the perfor- mance of the measurement site - describe the processing and evaluation of the mea- suring data - compare the measured data with the computed data based on SMUSI simulations - discuss the opportunities and boundaries of measuring in urban hydro- logical systems regarding new approaches (measuring, modelling, managing) as well as the attainable accurracies of measurement.
Bias correction by use of errors-in-variables regression models in studies with K-X-ray fluorescence bone lead measurements.

PubMed

Lamadrid-Figueroa, Héctor; Téllez-Rojo, Martha M; Angeles, Gustavo; Hernández-Ávila, Mauricio; Hu, Howard

2011-01-01

In-vivo measurement of bone lead by means of K-X-ray fluorescence (KXRF) is the preferred biological marker of chronic exposure to lead. Unfortunately, considerable measurement error associated with KXRF estimations can introduce bias in estimates of the effect of bone lead when this variable is included as the exposure in a regression model. Estimates of uncertainty reported by the KXRF instrument reflect the variance of the measurement error and, although they can be used to correct the measurement error bias, they are seldom used in epidemiological statistical analyzes. Errors-in-variables regression (EIV) allows for correction of bias caused by measurement error in predictor variables, based on the knowledge of the reliability of such variables. The authors propose a way to obtain reliability coefficients for bone lead measurements from uncertainty data reported by the KXRF instrument and compare, by the use of Monte Carlo simulations, results obtained using EIV regression models vs. those obtained by the standard procedures. Results of the simulations show that Ordinary Least Square (OLS) regression models provide severely biased estimates of effect, and that EIV provides nearly unbiased estimates. Although EIV effect estimates are more imprecise, their mean squared error is much smaller than that of OLS estimates. In conclusion, EIV is a better alternative than OLS to estimate the effect of bone lead when measured by KXRF. Copyright Â© 2010 Elsevier Inc. All rights reserved.
Induction Speed Is Not a Determinant of Propofol Pharmacodynamics

PubMed Central

Doufas, Anthony G.; Bakhshandeh, Maryam; Bjorksten, Andrew R.; Shafer, Steven L.; Sessler, Daniel I.

2005-01-01

Summary We used individual pharmacodynamic modeling to demonstrate that different sedation endpoints occur at the same effect site propofol concentration, independent of the infusion rate of propofol. Background Evidence suggests that the rate at which they are infused may influence plasma-effect site equilibration of intravenous anesthetics. We used 5 different rates of propofol administration to test the hypothesis that different sedation endpoints occur at the same effect site propofol concentration, independent of the infusion rate. We concurrently evaluated the automated responsiveness monitor (ARM) against other sedation measures and the propofol effect site concentration. Methods With Human Studies Committee approval, 18 healthy volunteers received 5 consecutive target-controlled propofol infusions. During each infusion the effect site concentration was increased by a rate of 0.1, 0.3, 0.5, 0.7, or 0.9 μg·ml−1·min−1. Bispectral index and ARM were recorded at frequent intervals. The times of syringe drop and loss and recovery of responsiveness were noted. Pharmacokinetic and pharmacodynamic modeling was performed using NONMEM. Results Once the correct rate of plasma-effect site equilibration (ke0) was determined for each individual (ke0 = 0.17 min−1, time-to-peak effect = 2.7 min), the effect site concentrations associated with each clinical measure were not affected by the rate of rise of effect site propofol concentration. ARM correlated with all clinical measures of drug effect. Subjects invariably stopped responding to ARM at lower effect site propofol concentrations than those associated with loss of responsiveness. Conclusions Population-based pharmacokinetics, combined with real-time electroencephalographic measures of drug effect, may provide a means to individualize pharmacodynamic modeling during target-controlled drug delivery. ARM appears useful as an automated measure of sedation and may provide the basis for automated monitoring and titration of sedation for a propofol delivery system. PMID:15505446
Effect of analgesic therapy on clinical outcome measures in a randomized controlled trial using client-owned dogs with hip osteoarthritis.

PubMed

Malek, Sarah; Sample, Susannah J; Schwartz, Zeev; Nemke, Brett; Jacobson, Peer B; Cozzi, Elizabeth M; Schaefer, Susan L; Bleedorn, Jason A; Holzman, Gerianne; Muir, Peter

2012-10-04

Pain and impaired mobility because of osteoarthritis (OA) is common in dogs and humans. Efficacy studies of analgesic drug treatment of dogs with naturally occurring OA may be challenging, as a caregiver placebo effect is typically evident. However, little is known about effect sizes of common outcome-measures in canine clinical trials evaluating treatment of OA pain. Forty-nine client-owned dogs with hip OA were enrolled in a randomized, double-blinded placebo-controlled prospective trial. After a 1 week baseline period, dogs were randomly assigned to a treatment (ABT-116 - transient receptor potential vanilloid 1 (TRPV1) antagonist, Carprofen - non-steroidal anti-inflammatory drug (NSAID), Tramadol - synthetic opiate, or Placebo) for 2 weeks. Outcome-measures included physical examination parameters, owner questionnaire, activity monitoring, gait analysis, and use of rescue medication. Acute hyperthermia developed after ABT-116 treatment (P < 0.001). Treatment with carprofen (P ≤ 0.01) and tramadol (P ≤ 0.001) led to improved mobility assessed by owner questionnaire. Nighttime activity was increased after ABT-116 treatment (P = 0.01). Kinetic gait analysis did not reveal significant treatment effects. Use of rescue treatment decreased with treatment in the ABT-116 and Carprofen groups (P < 0.001). Questionnaire score and activity count at the end of treatment were correlated with age, clinical severity at trial entry, and outcome measure baseline status (SR ≥ ±0.40, P ≤ 0.005). Placebo treatment effects were evident with all variables studied. Treatment of hip OA in client-owned dogs is associated with a placebo effect for all variables that are commonly used for efficacy studies of analgesic drugs. This likely reflects caregiver bias or the phenomenon of regression to the mean. In the present study, outcome measures with significant effects also varied between groups, highlighting the value of using multiple outcome measures, as well as an a priori analysis of effect size associated with each measure. Effect size data from the present study could be used to inform design of future trials studying analgesic treatment of canine OA. Our results suggest that analgesic treatment with ABT-116 is not as effective as carprofen or tramadol for treatment of hip arthritis pain in client-owned dogs.
Effect of analgesic therapy on clinical outcome measures in a randomized controlled trial using client-owned dogs with hip osteoarthritis

PubMed Central

2012-01-01

Background Pain and impaired mobility because of osteoarthritis (OA) is common in dogs and humans. Efficacy studies of analgesic drug treatment of dogs with naturally occurring OA may be challenging, as a caregiver placebo effect is typically evident. However, little is known about effect sizes of common outcome-measures in canine clinical trials evaluating treatment of OA pain. Forty-nine client-owned dogs with hip OA were enrolled in a randomized, double-blinded placebo-controlled prospective trial. After a 1 week baseline period, dogs were randomly assigned to a treatment (ABT-116 – transient receptor potential vanilloid 1 (TRPV1) antagonist, Carprofen – non-steroidal anti-inflammatory drug (NSAID), Tramadol - synthetic opiate, or Placebo) for 2 weeks. Outcome-measures included physical examination parameters, owner questionnaire, activity monitoring, gait analysis, and use of rescue medication. Results Acute hyperthermia developed after ABT-116 treatment (P < 0.001). Treatment with carprofen (P ≤ 0.01) and tramadol (P ≤ 0.001) led to improved mobility assessed by owner questionnaire. Nighttime activity was increased after ABT-116 treatment (P = 0.01). Kinetic gait analysis did not reveal significant treatment effects. Use of rescue treatment decreased with treatment in the ABT-116 and Carprofen groups (P < 0.001). Questionnaire score and activity count at the end of treatment were correlated with age, clinical severity at trial entry, and outcome measure baseline status (SR ≥ ±0.40, P ≤ 0.005). Placebo treatment effects were evident with all variables studied. Conclusion Treatment of hip OA in client-owned dogs is associated with a placebo effect for all variables that are commonly used for efficacy studies of analgesic drugs. This likely reflects caregiver bias or the phenomenon of regression to the mean. In the present study, outcome measures with significant effects also varied between groups, highlighting the value of using multiple outcome measures, as well as an a priori analysis of effect size associated with each measure. Effect size data from the present study could be used to inform design of future trials studying analgesic treatment of canine OA. Our results suggest that analgesic treatment with ABT-116 is not as effective as carprofen or tramadol for treatment of hip arthritis pain in client-owned dogs. PMID:23035739
Remote atmospheric probing by ground to ground line of sight optical methods

NASA Technical Reports Server (NTRS)

Lawrence, R. S.

1969-01-01

The optical effects arising from refractive-index variations in the clear air are qualitatively described, and the possibilities are discussed of using those effects for remotely sensing the physical properties of the atmosphere. The effects include scintillations, path length fluctuations, spreading of a laser beam, deflection of the beam, and depolarization. The physical properties that may be measured include the average temperature along the path, the vertical temperature gradient, and the distribution along the path of the strength of turbulence and the transverse wind velocity. Line-of-sight laser beam methods are clearly effective in measuring the average properties, but less effective in measuring distributions along the path. Fundamental limitations to the resolution are pointed out and experiments are recommended to investigate the practicality of the methods.
Binary Logistic Regression Analysis for Detecting Differential Item Functioning: Effectiveness of R[superscript 2] and Delta Log Odds Ratio Effect Size Measures

ERIC Educational Resources Information Center

Hidalgo, Mª Dolores; Gómez-Benito, Juana; Zumbo, Bruno D.

2014-01-01

The authors analyze the effectiveness of the R[superscript 2] and delta log odds ratio effect size measures when using logistic regression analysis to detect differential item functioning (DIF) in dichotomous items. A simulation study was carried out, and the Type I error rate and power estimates under conditions in which only statistical testing…
Effects of Stress and Social Enrichment on Alcohol Intake, Biological and Psychological Stress Responses in Rats

DTIC Science & Technology

2010-06-28

Variance (ANOVA) Table for Serum Corticosterone Table 15 – Repeated-Measures ANOVA Table for Body Weight, Within-Subject Effects Table 16...Serum Ethanol Concentration Table 21 – Repeated-Measures ANOVA Table for Rotarod Performance, Within- Subject Effects Table 22 – Repeated...and that this social environment seems to attenuate the effects of predator and unpredictable stressors on serum corticosterone . In summary, stressed
A Generalized DIF Effect Variance Estimator for Measuring Unsigned Differential Test Functioning in Mixed Format Tests

ERIC Educational Resources Information Center

Penfield, Randall D.; Algina, James

2006-01-01

One approach to measuring unsigned differential test functioning is to estimate the variance of the differential item functioning (DIF) effect across the items of the test. This article proposes two estimators of the DIF effect variance for tests containing dichotomous and polytomous items. The proposed estimators are direct extensions of the…
FMCSA safety program effectiveness measurement: intervention model fiscal year 2009.

DOT National Transportation Integrated Search

2013-04-01

The Federal Motor Carrier Safety Administration (FMCSA), in cooperation with the researcher, has developed an analytic model to measure the effectiveness of roadside inspections and traffic enforcements in terms of crashes avoided, injuries avoided, ...
Metabolic, respiratory, and cardiological measurements during exercise and rest

NASA Technical Reports Server (NTRS)

1971-01-01

Low concentration effects of CO2 on metabolic respiration and circulation were measured during work and at rest. The relationship between heart rate and metabolic rate is examined, as well as calibration procedures, and rate measurement during submaximal and standard exercise tests. Alterations in acid base and electrolytes were found during exhaustive exercise, including changes in ECG and metabolic alkalosis effects.
Impact of parasitic thermal effects on thermoelectric property measurements by Harman method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kwon, Beomjin, E-mail: bkwon@kist.re.kr; Baek, Seung-Hyub; Keun Kim, Seong

2014-04-15

Harman method is a rapid and simple technique to measure thermoelectric properties. However, its validity has been often questioned due to the over-simplified assumptions that this method relies on. Here, we quantitatively investigate the influence of the previously ignored parasitic thermal effects on the Harman method and develop a method to determine an intrinsic ZT. We expand the original Harman relation with three extra terms: heat losses via both the lead wires and radiation, and Joule heating within the sample. Based on the expanded Harman relation, we use differential measurement of the sample geometry to measure the intrinsic ZT. Tomore » separately evaluate the parasitic terms, the measured ZTs with systematically varied sample geometries and the lead wire types are fitted to the expanded relation. A huge discrepancy (∼28%) of the measured ZTs depending on the measurement configuration is observed. We are able to separately evaluate those parasitic terms. This work will help to evaluate the intrinsic thermoelectric property with Harman method by eliminating ambiguities coming from extrinsic effects.« less
Anthropometric Measurements and Dental Caries in Children: A Systematic Review of Longitudinal Studies123

PubMed Central

Li, Ling-Wei; Wong, Hai Ming; Peng, Si-Min; McGrath, Colman P

2015-01-01

There is growing interest in the association between anthropometric measurements and dental caries in childhood over time (life-course studies). The aim of this review was to identify and systematically review the evidence of the association between anthropometric measurements and dental caries in childhood over time. PubMed, Institute for Scientific Information (ISI) Web of Knowledge, the Cochrane Library, and 6 other databases were searched to identify effective articles. A systematic approach involving critical appraisal was conducted to examine the relation between anthropometric measurements and dental caries in preschool- and school-aged populations from longitudinal studies. An initial search identified 1338 studies, with 59 potentially effective studies (κ = 0.82) and 17 effective studies (κ = 0.88). The quality of reporting among the studies ranged from 19.5 to 30.0 according to the Strengthening the Reporting of Observational studies in Epidemiology (STROBE) criteria. Among the effective studies, 2 studies in which caries was used to predict anthropometric measurements consistently found an inverse association and 15 studies in which anthropometric measurements were used to predict caries were inconsistent, with results appearing to be influenced by nonuniformity of assessments, setting, and procedure of measurements; age and ethnicity of participants; and confounders of dental caries. In conclusion, among >1000 studies identified, 17 informed this systematic review. The quality of reporting of these studies varied considerably. Evidence of the association between anthropometric measurements and dental caries is conflicting and remains inconclusive. PMID:25593143
Speech rate reduction and "nasality" in normal speakers.

PubMed

Brancewicz, T M; Reich, A R

1989-12-01

This study explored the effects of reduced speech rate on nasal/voice accelerometric measures and nasality ratings. Nasal/voice accelerometric measures were obtained from normal adults for various speech stimuli and speaking rates. Stimuli included three sentences (one obstruent-loaded, one semivowel-loaded, and one containing a single nasal), and /pv/ syllable trains.. Speakers read the stimuli at their normal rate, half their normal rate, and as slowly as possible. In addition, a computer program paced each speaker at rates of 1, 2, and 3 syllables per second. The nasal/voice accelerometric values revealed significant stimulus effects but no rate effects. The nasality ratings of experienced listeners, evaluated as a function of stimulus and speaking rate, were compared to the accelerometric measures. The nasality scale values demonstrated small, but statistically significant, stimulus and rate effects. However, the nasality percepts were poorly correlated with the nasal/voice accelerometric measures.
Effects of caffeine in overnight-withdrawn consumers and non-consumers.

PubMed

Smith, Andrew P; Christopher, Gary; Sutherland, David

2006-01-01

A number of recent studies have suggested that caffeine only improves mood and cognitive performance in regular caffeine consumers who are caffeine withdrawn at test (the "withdrawal hypothesis"). This can be tested by investigating the effects of caffeine in non-consumers of caffeine. To compare the effects of 2 mg/kg caffeine on mood and cognitive performance in overnight-withdrawn consumers and non-consumers of caffeine. Twenty-five overnight-withdrawn consumers and twenty-five non-consumers of caffeine were tested in a within-subjects design where they were given a drink containing 2 mg/kg caffeine on one test day and placebo on another test day. The order of conditions (caffeine/placebo) was counterbalanced. Mood and performance measures were taken before and after each drink, and pre-drink measures were used as covariates in the analysis of post-drink measures. Analysis of baseline scores revealed no significant effects of caffeine withdrawal. Caffeine generally improved mood and cognitive performance, relative to placebo, in both subjects groups. These effects did not differ significantly between groups apart from three measures (fewer lapses of attention and ratings of alertness and anxiety) where the effects of caffeine were larger in the non-consumers. The present study revealed no negative effects of caffeine withdrawal. Beneficial effects of caffeine were observed in both withdrawn consumers and in non-consumers. Therefore, the withdrawal hypothesis is not an adequate explanation for the effects of caffeine.
Atmospheric Effects and Potential Climatic Impact of the 1980 Eruptions of Mount St. Helens

NASA Technical Reports Server (NTRS)

Deepak, A. (Editor)

1982-01-01

Measurements and studies of the 1980 Mount St. Helens volcanic eruptions and their atmospheric effects and climatic impact are addressed. Specific areas discussed include: (1) nature and impact of volcanic eruptions; (2) in situ measurements of effluents; (3) remote sensing measurements; (4) transport and dispersion of volcanic effluents; (5) chemistry of volcanic effluents; and (6) weather and potential climate impact.

Characterizing Speech Intelligibility in Noise After Wide Dynamic Range Compression.

PubMed

Rhebergen, Koenraad S; Maalderink, Thijs H; Dreschler, Wouter A

The effects of nonlinear signal processing on speech intelligibility in noise are difficult to evaluate. Often, the effects are examined by comparing speech intelligibility scores with and without processing measured at fixed signal to noise ratios (SNRs) or by comparing the adaptive measured speech reception thresholds corresponding to 50% intelligibility (SRT50) with and without processing. These outcome measures might not be optimal. Measuring at fixed SNRs can be affected by ceiling or floor effects, because the range of relevant SNRs is not know in advance. The SRT50 is less time consuming, has a fixed performance level (i.e., 50% correct), but the SRT50 could give a limited view, because we hypothesize that the effect of most nonlinear signal processing algorithms at the SRT50 cannot be generalized to other points of the psychometric function. In this article, we tested the value of estimating the entire psychometric function. We studied the effect of wide dynamic range compression (WDRC) on speech intelligibility in stationary, and interrupted speech-shaped noise in normal-hearing subjects, using a fast method-based local linear fitting approach and by two adaptive procedures. The measured performance differences for conditions with and without WDRC for the psychometric functions in stationary noise and interrupted speech-shaped noise show that the effects of WDRC on speech intelligibility are SNR dependent. We conclude that favorable and unfavorable effects of WDRC on speech intelligibility can be missed if the results are presented in terms of SRT50 values only.
Nondestructive In Situ Measurement Method for Kernel Moisture Content in Corn Ear.

PubMed

Zhang, Han-Lin; Ma, Qin; Fan, Li-Feng; Zhao, Peng-Fei; Wang, Jian-Xu; Zhang, Xiao-Dong; Zhu, De-Hai; Huang, Lan; Zhao, Dong-Jie; Wang, Zhong-Yi

2016-12-20

Moisture content is an important factor in corn breeding and cultivation. A corn breed with low moisture at harvest is beneficial for mechanical operations, reduces drying and storage costs after harvesting and, thus, reduces energy consumption. Nondestructive measurement of kernel moisture in an intact corn ear allows us to select corn varieties with seeds that have high dehydration speeds in the mature period. We designed a sensor using a ring electrode pair for nondestructive measurement of the kernel moisture in a corn ear based on a high-frequency detection circuit. Through experiments using the effective scope of the electrodes' electric field, we confirmed that the moisture in the corn cob has little effect on corn kernel moisture measurement. Before the sensor was applied in practice, we investigated temperature and conductivity effects on the output impedance. Results showed that the temperature was linearly related to the output impedance (both real and imaginary parts) of the measurement electrodes and the detection circuit's output voltage. However, the conductivity has a non-monotonic dependence on the output impedance (both real and imaginary parts) of the measurement electrodes and the output voltage of the high-frequency detection circuit. Therefore, we reduced the effect of conductivity on the measurement results through measurement frequency selection. Corn moisture measurement results showed a quadric regression between corn ear moisture and the imaginary part of the output impedance, and there is also a quadric regression between corn kernel moisture and the high-frequency detection circuit output voltage at 100 MHz. In this study, two corn breeds were measured using our sensor and gave R ² values for the quadric regression equation of 0.7853 and 0.8496.
Empirical Synthesis of the Effect of Standard Error of Measurement on Decisions Made within Brief Experimental Analyses of Reading Fluency

ERIC Educational Resources Information Center

Burns, Matthew K.; Taylor, Crystal N.; Warmbold-Brann, Kristy L.; Preast, June L.; Hosp, John L.; Ford, Jeremy W.

2017-01-01

Intervention researchers often use curriculum-based measurement of reading fluency (CBM-R) with a brief experimental analysis (BEA) to identify an effective intervention for individual students. The current study synthesized data from 22 studies that used CBM-R data within a BEA by computing the standard error of measure (SEM) for the median data…
Caffeine expectancy: instrument development in the Rasch measurement framework.

PubMed

Heinz, Adrienne J; Kassel, Jon D; Smith, Everett V

2009-09-01

Although caffeine is the most widely consumed psychoactive drug in the world, the mechanisms associated with consumption are not well understood. Nonetheless, outcome expectancies for caffeine use are thought to underlie caffeine's reinforcing properties. To date, however, there is no available, sufficient measure by which to assess caffeine expectancy. Therefore, the current study sought to develop such a measure employing Rasch measurement models. Unlike traditional measurement development techniques, Rasch analyses afford dynamic and interactive control of the analysis process and generate helpful information to guide instrument construction. A 5-stage developmental process is described, ultimately yielding a 37-item Caffeine Expectancy Questionnaire (CEQ) comprised of 4 factors representing "withdrawal symptoms," "positive effects," "acute negative effects," and "mood effects." Initial evaluation of the CEQ yielded sufficient evidence for various aspects of validity. Although additional research with more heterogeneous samples is required to further assess the measure's reliability and validity, the CEQ demonstrates potential with regard to its utility in experimental laboratory research and clinical application. 2009 APA, all rights reserved.
UV/visible albedos from airborne measurements

NASA Astrophysics Data System (ADS)

Webb, A.; Kylling, A.; Stromberg, I.

2003-04-01

During the INSPECTRO campaign effective surface albedo was measured at UV and visible wavelengths from two airborne platforms, a Cessna light aircraft and a hot air balloon. On board the Cessna was a scanning spectroradiometer measuring from 300 - 500nm at 10nm intervals. The NILU cube, with 6 faces and two UV channels at 312 and 340nm, was suspended beneath the hot air balloon. Flights took place over East Anglia during September, 2002. Balloon flights were made below cloud layers, while the Cessna flew both above and below cloud. The Cessna also flew over Barton Bendish, where surface albedos have been measured for ground truthing of satellite data, and measured the effective albedo at four visible wave- lengths in the centres of the satellite bandpass functions. Results of measurements from the different platforms are compared, and model simulations used to deduce the surface albedo from the effective albedo at altitude, giving, for example, an albedo of 0.02 ± 0.01 at 340nm.
Estimation of groundwater recharge parameters by time series analysis

USGS Publications Warehouse

Naff, Richard L.; Gutjahr, Allan L.

1983-01-01

A model is proposed that relates water level fluctuations in a Dupuit aquifer to effective precipitaton at the top of the unsaturated zone. Effective precipitation, defined herein as that portion of precipitation which becomes recharge, is related to precipitation measured in a nearby gage by a two-parameter function. A second-order stationary assumption is used to connect the spectra of effective precipitation and water level fluctuations. Measured precipitation is assumed to be Gaussian, in order to develop a transfer function that relates the spectra of measured and effective precipitation. A nonlinear least squares technique is proposed for estimating parameters of the effective-precipitation function. Although sensitivity analyses indicate difficulties that may be encountered in the estimation procedure, the methods developed did yield convergent estimates for two case studies.
Tracking Transfer: New Measures of Institutional and State Effectiveness in Helping Community College Students Attain Bachelor's Degrees

ERIC Educational Resources Information Center

Jenkins, Davis; Fink, John

2016-01-01

Increasing the effectiveness of two- to four-year college transfer is critical for meeting national goals for college attainment and promoting upward social mobility. Efforts to improve institutional effectiveness in serving transfer students and state transfer policy have been hampered by a lack of comparable metrics for measuring transfer…
Understanding how pain education causes changes in pain and disability: protocol for a causal mediation analysis of the PREVENT trial.

PubMed

Lee, Hopin; Moseley, G Lorimer; Hübscher, Markus; Kamper, Steven J; Traeger, Adrian C; Skinner, Ian W; McAuley, James H

2015-07-01

Pain education is a complex intervention developed to help clinicians manage low back pain. Although complex interventions are usually evaluated by their effects on outcomes, such as pain or disability, most do not directly target these outcomes; instead, they target intermediate factors that are presumed to be associated with the outcomes. The mechanisms underlying treatment effects, or the effect of an intervention on an intermediate factor and its subsequent effect on outcome, are rarely investigated in clinical trials. This leaves a gap in the evidence for understanding how treatments exert their effects on outcomes. Mediation analysis provides a method for identifying and quantifying the mechanisms that underlie interventions. To determine whether the effect of pain education on pain and disability is mediated by changes in self-efficacy, catastrophisation and back pain beliefs. Causal mediation analysis of the PREVENT randomised controlled trial. Two hundred and two participants with acute low back pain from primary care clinics in the Sydney metropolitan area. Participants will be randomised to receive either 'pain education' (intervention group) or 'sham education' (control group). All outcome measures (including patient characteristics), primary outcome measures (pain and disability), and putative mediating variables (self-efficacy, catastrophisation and back pain beliefs) will be measured prior to randomisation. Putative mediators and primary outcome measures will be measured 1 week after the intervention, and primary outcome measures will be measured 3 months after the onset of low back pain. Causal mediation analysis under the potential outcomes framework will be used to test single and multiple mediator models. A sensitivity analysis will be conducted to evaluate the robustness of the estimated mediation effects on the influence of violating sequential ignorability--a critical assumption for causal inference. Mediation analysis of clinical trials can estimate how much the total effect of the treatment on the outcome is carried through an indirect path. Using mediation analysis to understand these mechanisms can generate evidence that can be used to tailor treatments and optimise treatment effects. In this study, the causal mediation effects of a pain education intervention for acute non-specific low back pain will be estimated. This knowledge is critical for further development and refinement of interventions for conditions such as low back pain. Copyright © 2015 Australian Physiotherapy Association. Published by Elsevier B.V. All rights reserved.
Effects of density gradients and fluctuations at the plasma edge on ECEI measurements at ASDEX Upgrade

NASA Astrophysics Data System (ADS)

Vanovac, B.; Wolfrum, E.; Denk, S. S.; Mink, F.; Laggner, F. M.; Birkenmeier, G.; Willensdorfer, M.; Viezzer, E.; Hoelzl, M.; Freethy, S. J.; Dunne, M. G.; Lessig, A.; Luhmann, N. C., Jr.; the ASDEX Upgrade Team; the EUROfusion MST1 Team

2018-04-01

Electron cyclotron emission imaging (ECEI) provides measurements of electron temperature (T e ) and its fluctuations (δT e ). However, when measuring at the plasma edge, in the steep gradient region, radiation transport effects must be taken into account. It is shown that due to these effects, the scrape-off layer region is not accessible to the ECEI measurements in steady state conditions and that the signal is dominated by the shine-through emission. Transient effects, such as filaments, can change the radiation transport locally, but cannot be distinguished from the shine-through. Local density measurements are essential for the correct interpretation of the electron cyclotron emission, since the density fluctuations influence the temperature measurements at the plasma edge. As an example, a low frequency 8 kHz mode, which causes 10%-15% fluctuations in the signal level of the ECEI, is analysed. The same mode has been measured with the lithium beam emission spectroscopy density diagnostic, and is very well correlated in time with high frequency magnetic fluctuations. With radiation transport modelling of the electron cyclotron radiation in the ECEI geometry, it is shown that the density contributes significantly to the radiation temperature (T rad) and the experimental observations have shown the amplitude modulation in both density and temperature measurements. The poloidal velocity of the low frequency mode measured by the ECEI is 3 km s-1. The calculated velocity of the high frequency mode measured with the magnetic pick-up coils is about 25 km s-1. Velocities are compared with the E × B background flow velocity and possible explanations for the origin of the low frequency mode are discussed.
Cardiovascular effects of 3,4-methylenedioxymethamphetamine. A double-blind, placebo-controlled trial.

PubMed

Lester, S J; Baggott, M; Welm, S; Schiller, N B; Jones, R T; Foster, E; Mendelson, J

2000-12-19

The psychoactive stimulant 3, 4-methylenedioxymethamphetamine (MDMA), also known as "ecstasy," is widely used in nonmedical settings. Little is known about its cardiovascular effects. To evaluate the acute cardiovascular effects of MDMA by using transthoracic two-dimensional and Doppler echocardiography. Four-session, ascending-dose, double-blind, placebo-controlled trial. Urban hospital. Eight healthy adults who self-reported MDMA use. Echocardiographic effects of dobutamine (5, 20, and 40 microg/kg of body weight per minute) were measured in a preliminary session. Oral MDMA (0.5 and 1.5 mg/kg of body weight) or placebo was administered 1 hour before echocardiographic measurements in three weekly sessions. Heart rate and blood pressure were measured at regular intervals before and after MDMA administration. Echocardiographic measures of stroke volume, ejection fraction, cardiac output, and meridional wall stress were obtained 1 hour after MDMA administration and during dobutamine infusions. At a dose of 1.5 mg/kg, MDMA increased mean heart rate (by 28 beats/min), systolic blood pressure (by 25 mm Hg), diastolic blood pressure (by 7 mm Hg), and cardiac output (by 2 L/min). The effects of MDMA were similar to those of dobutamine, 20 and 40 microg/kg per minute. Inotropism, measured by using meridional wall stress corrected for ejection fraction, decreased after administration of dobutamine, 40 microg/kg per minute, but did not change after either dose of MDMA. Modest oral doses of MDMA increase heart rate, blood pressure, and myocardial oxygen consumption in a magnitude similar to dobutamine, 20 to 40 microg/kg per minute. In contrast to dobutamine, MDMA has no measurable inotropic effects.
Objective Physiological Measurements but Not Subjective Reports Moderate the Effect of Hunger on Choice Behavior

PubMed Central

Shabat-Simon, Maytal; Shuster, Anastasia; Sela, Tal; Levy, Dino J.

2018-01-01

Hunger is a powerful driver of human behavior, and is therefore of great interest to the study of psychology, economics, and consumer behavior. Assessing hunger levels in experiments is often biased, when using self-report methods, or complex, when using blood tests. We propose a novel way of objectively measuring subjects’ levels of hunger by identifying levels of alpha-amylase (AA) enzyme in their saliva samples. We used this measure to uncover the effect of hunger on different types of choice behaviors. We found that hunger increases risk-seeking behavior in a lottery-choice task, modifies levels of vindictiveness in a social decision-making task, but does not have a detectible effect on economic inconsistency in a budget-set choice task. Importantly, these findings were moderated by AA levels and not by self-report measures. We demonstrate the effects hunger has on choice behavior and the problematic nature of subjective measures of physiological states, and propose to use reliable and valid biologically based methods to overcome these problems. PMID:29875715
What is the effect of area size when using local area practice style as an instrument?

PubMed

Brooks, John M; Tang, Yuexin; Chapman, Cole G; Cook, Elizabeth A; Chrischilles, Elizabeth A

2013-08-01

Discuss the tradeoffs inherent in choosing a local area size when using a measure of local area practice style as an instrument in instrumental variable estimation when assessing treatment effectiveness. Assess the effectiveness of angiotensin converting-enzyme inhibitors and angiotensin receptor blockers on survival after acute myocardial infarction for Medicare beneficiaries using practice style instruments based on different-sized local areas around patients. We contrasted treatment effect estimates using different local area sizes in terms of the strength of the relationship between local area practice styles and individual patient treatment choices; and indirect assessments of the assumption violations. Using smaller local areas to measure practice styles exploits more treatment variation and results in smaller standard errors. However, if treatment effects are heterogeneous, the use of smaller local areas may increase the risk that local practice style measures are dominated by differences in average treatment effectiveness across areas and bias results toward greater effectiveness. Local area practice style measures can be useful instruments in instrumental variable analysis, but the use of smaller local area sizes to generate greater treatment variation may result in treatment effect estimates that are biased toward higher effectiveness. Assessment of whether ecological bias can be mitigated by changing local area size requires the use of outside data sources. Copyright © 2013 Elsevier Inc. All rights reserved.
Evaluating Robotic Surgical Skills Performance Under Distractive Environment Using Objective and Subjective Measures.

PubMed

Suh, Irene H; LaGrange, Chad A; Oleynikov, Dmitry; Siu, Ka-Chun

2016-02-01

Distractions are recognized as a significant factor affecting performance in safety critical domains. Although operating rooms are generally full of distractions, the effect of distractions on robot-assisted surgical (RAS) performance is unclear. Our aim was to investigate the effect of distractions on RAS performance using both objective and subjective measures. Fifteen participants performed a knot-tying task using the da Vinci Surgical System and were exposed to 3 distractions: (1) passive distraction entailed listening to noise with a constant heart rate, (2) active distraction included listening to noise and acknowledging a change of random heart rate from 60 to 120 bpm, and (3) interactive distraction consisted of answering math questions. The objective kinematics of the surgical instrument tips were used to evaluate performance. Electromyography (EMG) of the forearm and hand muscles of the participants were collected. The median EMG frequency (EMG(fmed)) and the EMG envelope (EMG(env)) were analyzed. NASA Task Load Index and Fundamentals of Laparoscopic Surgery score were used to evaluate the subjective performance. One-way repeated analysis of variance was applied to examine the effects of distraction on skills performance. Spearman's correlations were conducted to compare objective and subjective measures. Significant distraction effect was found for all objective kinematics measures (P < .05). There were significant distraction effects for EMG measures (EMG(env), P < .004; EMG(fmed), P = .031). Significant distraction effects were also found for subjective measurements. Distraction impairs surgical skills performance and increases muscle work. Understanding how the surgeons cope with distractions is important in developing surgical education. © The Author(s) 2015.
Attention Measures of Accuracy, Variability, and Fatigue Detect Early Response to Donepezil in Alzheimer's Disease: A Randomized, Double-blind, Placebo-Controlled Pilot Trial.

PubMed

Vila-Castelar, Clara; Ly, Jenny J; Kaplan, Lillian; Van Dyk, Kathleen; Berger, Jeffrey T; Macina, Lucy O; Stewart, Jennifer L; Foldi, Nancy S

2018-04-09

Donepezil is widely used to treat Alzheimer's disease (AD), but detecting early response remains challenging for clinicians. Acetylcholine is known to directly modulate attention, particularly under high cognitive conditions, but no studies to date test whether measures of attention under high load can detect early effects of donepezil. We hypothesized that load-dependent attention tasks are sensitive to short-term treatment effects of donepezil, while global and other domain-specific cognitive measures are not. This longitudinal, randomized, double-blind, placebo-controlled pilot trial (ClinicalTrials.gov Identifier: NCT03073876) evaluated 23 participants newly diagnosed with AD initiating de novo donepezil treatment (5 mg). After baseline assessment, participants were randomized into Drug (n = 12) or Placebo (n = 11) groups, and retested after approximately 6 weeks. Cognitive assessment included: (a) attention tasks (Foreperiod Effect, Attentional Blink, and Covert Orienting tasks) measuring processing speed, top-down accuracy, orienting, intra-individual variability, and fatigue; (b) global measures (Alzheimer's Disease Assessment Scale-Cognitive Subscale, Mini-Mental Status Examination, Dementia Rating Scale); and (c) domain-specific measures (memory, language, visuospatial, and executive function). The Drug but not the Placebo group showed benefits of treatment at high-load measures by preserving top-down accuracy, improving intra-individual variability, and averting fatigue. In contrast, other global or cognitive domain-specific measures could not detect treatment effects over the same treatment interval. The pilot-study suggests that attention measures targeting accuracy, variability, and fatigue under high-load conditions could be sensitive to short-term cholinergic treatment. Given the central role of acetylcholine in attentional function, load-dependent attentional measures may be valuable cognitive markers of early treatment response.
Stiles—Crawford effect and the bleaching of cone pigments

PubMed Central

Coble, J. R.; Rushton, W. A. H.

1971-01-01

1. The efficiency of light entering the eye through various points in the pupil (Stiles—Crawford effect) was studied using two criteria: (a) visual brightness judged by flicker fusion and (b) the rate of cone pigment bleaching measured by reflexion densitometry. 2. Both measurements were made in the same apparatus with the same geometry of presentation and both gave the same Stiles—Crawford effect. 3. This suggests that the densitometer measures pigment deep in the outer segments of the cones where light is absorbed for vision. 4. Foveal cones seem all to point in the same direction, since the fraction of pigment bleached by light entering the pupil at any one point is the same when measured by light entering anywhere. PMID:5571926
Causality, Measurement, and Elementary Interactions

NASA Astrophysics Data System (ADS)

Gillis, Edward J.

2011-12-01

Signal causality, the prohibition of superluminal information transmission, is the fundamental property shared by quantum measurement theory and relativity, and it is the key to understanding the connection between nonlocal measurement effects and elementary interactions. To prevent those effects from transmitting information between the generating and observing process, they must be induced by the kinds of entangling interactions that constitute measurements, as implied in the Projection Postulate. They must also be nondeterministic as reflected in the Born Probability Rule. The nondeterminism of entanglement-generating processes explains why the relevant types of information cannot be instantiated in elementary systems, and why the sequencing of nonlocal effects is, in principle, unobservable. This perspective suggests a simple hypothesis about nonlocal transfers of amplitude during entangling interactions, which yields straightforward experimental consequences.
Effectiveness Monitoring Report, MWMF Tritium Phytoremediation Interim Measures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hitchcock, Dan; Blake, John, I.

2003-02-10

This report describes and presents the results of monitoring activities during irrigation operations for the calendar year 2001 of the MWMF Interim Measures Tritium Phytoremediation Project. The purpose of this effectiveness monitoring report is to provide the information on instrument performance, analysis of CY2001 measurements, and critical relationships needed to manage irrigation operations, estimate efficiency and validate the water and tritium balance model.
A method for determining the actual rate of orientation switching of DNA self-assembled monolayers using optical and electrochemical frequency response analysis.

PubMed

Casanova-Moreno, J; Bizzotto, D

2015-02-17

Electrostatic control of the orientation of fluorophore-labeled DNA strands immobilized on an electrode surface has been shown to be an effective bioanalytical tool. Modulation techniques and later time-resolved measurements were used to evaluate the kinetics of the switching between lying and standing DNA conformations. These measurements, however, are the result of a convolution between the DNA "switching" response time and the other frequency limited responses in the measurement. In this work, a method for analyzing the response of a potential driven DNA sensor is presented by calculating the potential effectively dropped across the electrode interface (using electrochemical impedance spectroscopy) as opposed to the potential applied to the electrochemical cell. This effectively deconvolutes the effect of the charging time on the observed frequency response. The corrected response shows that DNA is able to switch conformation faster than previously reported using modulation techniques. This approach will ensure accurate measurements independent of the electrochemical system, removing the uncertainty in the analysis of the switching response, enabling comparison between samples and measurement systems.
Acute Effects of Three Neuromuscular Warm-Up Strategies on Several Physical Performance Measures in Football Players

PubMed Central

Ayala, Francisco; Calderón-López, Ana; Delgado-Gosálbez, Juan Carlos; Parra-Sánchez, Sergio; Pomares-Noguera, Carlos; Hernández-Sánchez, Sergio; López-Valenciano, Alejandro; De Ste Croix, Mark

2017-01-01

No studies have analysed the acute effects of the FIFA 11+ and Harmoknee warm-up programmes on major physical performance measures. The aim of this study was to analyse the acute (post-exercise) effects of the FIFA 11+, Harmoknee and dynamic warm-up routines on several physical performance measures in amateur football players. A randomized, crossover and counterbalanced study design was used to address the purpose of this study. A total of sixteen amateur football players completed the following protocols in a randomized order on separate days: a) FIFA 11+; b) Harmoknee; and c) dynamic warm-up (DWU). In each experimental session, 19 physical performance measures (joint range of motion, hamstring to quadriceps [H/Q] strength ratios, dynamic postural control, 10 and 20 m sprint times, jump height and reactive strength index) were assessed. Measures were compared via a magnitude-based inference analysis. The results of this study showed no main effects between paired comparisons (FIFA 11+ vs. DWU, Harmoknee vs. DWU and Harmoknee vs. FIFA 11+) for joint range of motions, dynamic postural control, H/Q ratios, jumping height and reactive strength index measures. However, significant main effects (likely effects with a probability of >75–99%) were found for 10 (1.7%) and 20 (2.4%) m sprint times, demonstrating that both the FIFA 11+ and Harmoknee resulted in slower sprint times in comparison with the DWU. Therefore, neither the FIFA 11+ nor the Harmoknee routines appear to be preferable to dynamic warm-up routines currently performed by most football players prior to training sessions and matches. PMID:28060927
PARTICULATE EMISSION MEASUREMENTS FROM CONTROLLED CONSTRUCTION ACTIVITIES

EPA Science Inventory

The report summarized the results of field testing of the effectiveness of control measures for sources of fugitive particulate emissions found at construction sites. The effectiveness of watering temporary, unpaved travel surfaces on emissions of particulate matter with aerodyna...

Infrared response measurements on radiation-damaged Si/Li/ detectors.

NASA Technical Reports Server (NTRS)

Sher, A. H.; Liu, Y. M.; Keery, W. J.

1972-01-01

The improved infrared response (IRR) technique has been used to qualitatively compare radiation effects on Si(Li) detectors with energy levels reported for silicon in the literature. Measurements have been made on five commercial silicon detectors and one fabricated in-house, both before and after irradiation with fast neutrons, 1.9-MeV protons, and 1.6-MeV electrons. Effects dependent upon the extent of radiation damage have been observed. It seems likely that the photo-EMF, or photo-voltage, effect is the basic mechanism for the observation of IRR in p-i-n diodes with a wide i-region. Experimental characteristics of the IRR measurement are in agreement with those of the photovoltage effect.
The study of stereo vision technique for the autonomous vehicle

NASA Astrophysics Data System (ADS)

Li, Pei; Wang, Xi; Wang, Jiang-feng

2015-08-01

The stereo vision technology by two or more cameras could recovery 3D information of the field of view. This technology can effectively help the autonomous navigation system of unmanned vehicle to judge the pavement conditions within the field of view, and to measure the obstacles on the road. In this paper, the stereo vision technology in measuring the avoidance of the autonomous vehicle is studied and the key techniques are analyzed and discussed. The system hardware of the system is built and the software is debugged, and finally the measurement effect is explained by the measured data. Experiments show that the 3D reconstruction, within the field of view, can be rebuilt by the stereo vision technology effectively, and provide the basis for pavement condition judgment. Compared with unmanned vehicle navigation radar used in measuring system, the stereo vision system has the advantages of low cost, distance and so on, it has a good application prospect.
Physical activity measurements affected participants' behavior in a randomized controlled trial.

PubMed

van Sluijs, Esther M F; van Poppel, Mireille N M; Twisk, Jos W R; van Mechelen, Willem

2006-04-01

Assessing levels and determinants of physical activity as outcome measurements might have an independent effect on participant's physical activity behavior. The objective is to study this effect in a randomized controlled trial (RCT) promoting regular physical activity in Dutch general practice. Using a Solomon four-group design, participants were randomized twice. After randomization to a control or intervention-condition at general practice level (N = 29), participants were randomized to a group participating in measurements at baseline, 2 and 6 months (3M-group, N = 361), or a group only participating in measurements at 6 months (1M-group, N = 356). Outcome measures assessed at 6 months included: level of physical activity (self-reported and objectively measured with accelerometry), meeting ACSM/CDC guideline for regular physical activity, stage of change, and determinants of physical activity. Follow-up data on 635 participants (89%) was collected. Statistically significant measurement effects were found for meeting the ACSM/CDC guideline (self-reported), self-efficacy for resisting relapse, knowledge, and on awareness. Other outcome measures showed positive trends, except stages of change. Measurements of physical activity affect participant's physical activity behavior, possibly triggered by a raised awareness about their own physical activity level. Implications for future research are discussed, as well as methodologic limitations of the study design.
A speech pronunciation practice system for speech-impaired children: A study to measure its success.

PubMed

Salim, Siti Salwah; Mustafa, Mumtaz Begum Binti Peer; Asemi, Adeleh; Ahmad, Azila; Mohamed, Noraini; Ghazali, Kamila Binti

2016-09-01

The speech pronunciation practice (SPP) system enables children with speech impairments to practise and improve their speech pronunciation. However, little is known about the surrogate measures of the SPP system. This research aims to measure the success and effectiveness of the SPP system using three surrogate measures: usage (frequency of use), performance (recognition accuracy) and satisfaction (children's subjective reactions), and how these measures are aligned with the success of the SPP system, as well as to each other. We have measured the absolute change in the word error rate (WER) between the pre- and post-training, using the ANOVA test. Correlation co-efficiency (CC) analysis was conducted to test the relation between the surrogate measures, while a Structural Equation Model (SEM) was used to investigate the causal relations between the measures. The CC test results indicate a positive correlation between the surrogate measures. The SEM supports all the proposed gtheses. The ANOVA results indicate that SPP is effective in reducing the WER of impaired speech. The SPP system is an effective assistive tool, especially for high levels of severity. We found that performance is a mediator of the relation between "usage" and "satisfaction". Copyright © 2016 Elsevier Ltd. All rights reserved.
The Patient Assessment Questionnaire: initial validation of a measure of treatment effectiveness for patients with schizophrenia and schizoaffective disorder.

PubMed

Mojtabai, Ramin; Corey-Lisle, Patricia K; Ip, Edward Hak-Sing; Kopeykina, Irina; Haeri, Sophia; Cohen, Lisa Janet; Shumaker, Sally

2012-12-30

Investigation of patients' subjective perspective regarding the effectiveness - as opposed to efficacy - of antipsychotic medication has been hampered by a relative shortage of self-report measures of global clinical outcome. This paper presents data supporting the feasibility, inter-item consistency, and construct validity of the Patient Assessment Questionnaire (PAQ)-a self-report measure of psychiatric symptoms, medication side effects and general wellbeing, ultimately intended to assess effectiveness of interventions for schizophrenia-spectrum patients. The original 53-item instrument was developed by a multidisciplinary team which utilized brainstorming sessions for item generation and content analysis, patient focus groups, and expert panel reviews. This instrument and additional validation measures were administered, via Audio Computer-Assisted Self-Interviewing (ACASI), to 300 stable, medicated outpatients diagnosed with schizophrenia or schizoaffective disorder. Item elimination was based on psychometric properties and Item-Response Theory information functions and characteristic curves. Exploratory factor analysis of the resulting 40-item scale yielded a five factor solution. The five subscales (General Distress, Side Effects, Psychotic Symptoms, Cognitive Symptoms, Sleep) showed robust convergent (β's=0.34-0.75, average β=0.49) and discriminant validity. The PAQ demonstrates feasibility, reliability, and construct validity as a self-report measure of multiple domains pertinent to effectiveness. Future research needs to establish the PAQ's sensitivity to change. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.
Absolute cerebral blood flow quantification with pulsed arterial spin labeling during hyperoxia corrected with the simultaneous measurement of the longitudinal relaxation time of arterial blood.

PubMed

Pilkinton, David T; Hiraki, Teruyuki; Detre, John A; Greenberg, Joel H; Reddy, Ravinder

2012-06-01

Quantitative arterial spin labeling (ASL) estimates of cerebral blood flow (CBF) during oxygen inhalation are important in several contexts, including functional experiments calibrated with hyperoxia and studies investigating the effect of hyperoxia on regional CBF. However, ASL measurements of CBF during hyperoxia are confounded by the reduction in the longitudinal relaxation time of arterial blood (T(1a) ) from paramagnetic molecular oxygen dissolved in blood plasma. The aim of this study is to accurately quantify the effect of arbitrary levels of hyperoxia on T(1a) and correct ASL measurements of CBF during hyperoxia on a per-subject basis. To mitigate artifacts, including the inflow of fresh spins, partial voluming, pulsatility, and motion, a pulsed ASL approach was implemented for in vivo measurements of T(1a) in the rat brain at 3 Tesla. After accounting for the effect of deoxyhemoglobin dilution, the relaxivity of oxygen on blood was found to closely match phantom measurements. The results of this study suggest that the measured ASL signal changes are dominated by reductions in T(1a) for brief hyperoxic inhalation epochs, while the physiologic effects of oxygen on the vasculature account for most of the measured reduction in CBF for longer hyperoxic exposures. Copyright © 2011 Wiley-Liss, Inc.
Solar Maps Development: How the Maps Were Made | Geospatial Data Science |

Science.gov Websites

10% of a true measured value within the grid cell. Due to terrain effects and other microclimate effects and other microclimate influences, the local cloud cover can vary significantly even within a approximately 10% of a true measured value within the grid cell. Due to terrain effects and other microclimate
Analysing Simple Motions Using the Doppler Effect--"Seeing" Sound

ERIC Educational Resources Information Center

Stonawski, Tamás; Gálik, Tamás

2017-01-01

The Doppler effect has seen widespread use in the past hundred years. It is used for medical imaging, for measuring speed, temperature, direction, etc, and it makes the spatial relations of motion easy to map. The Doppler effect also allows GPS receivers to measure the speed of a vehicle significantly more accurately than dashboard speedometers.…
Limitations of signal averaging due to temporal correlation in laser remote-sensing measurements.

PubMed

Menyuk, N; Killinger, D K; Menyuk, C R

1982-09-15

Laser remote sensing involves the measurement of laser-beam transmission through the atmosphere and is subject to uncertainties caused by strong fluctuations due primarily to speckle, glint, and atmospheric-turbulence effects. These uncertainties are generally reduced by taking average values of increasing numbers of measurements. An experiment was carried out to directly measure the effect of signal averaging on back-scattered laser return signals from a diffusely reflecting target using a direct-detection differential-absorption lidar (DIAL) system. The improvement in accuracy obtained by averaging over increasing numbers of data points was found to be smaller than that predicted for independent measurements. The experimental results are shown to be in excellent agreement with a theoretical analysis which considers the effect of temporal correlation. The analysis indicates that small but long-term temporal correlation severely limits the improvement available through signal averaging.
Measurement and fitting techniques for the assessment of material nonlinearity using nonlinear Rayleigh waves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Torello, David; Kim, Jin-Yeon; Qu, Jianmin

2015-03-31

This research considers the effects of diffraction, attenuation, and the nonlinearity of generating sources on measurements of nonlinear ultrasonic Rayleigh wave propagation. A new theoretical framework for correcting measurements made with air-coupled and contact piezoelectric receivers for the aforementioned effects is provided based on analytical models and experimental considerations. A method for extracting the nonlinearity parameter β{sub 11} is proposed based on a nonlinear least squares curve-fitting algorithm that is tailored for Rayleigh wave measurements. Quantitative experiments are conducted to confirm the predictions for the nonlinearity of the piezoelectric source and to demonstrate the effectiveness of the curve-fitting procedure. Thesemore » experiments are conducted on aluminum 2024 and 7075 specimens and a β{sub 11}{sup 7075}/β{sub 11}{sup 2024} measure of 1.363 agrees well with previous literature and earlier work.« less
Thermal Boundary Layer Effects on Line-of-Sight Tunable Diode Laser Absorption Spectroscopy (TDLAS) Gas Concentration Measurements.

PubMed

Qu, Zhechao; Werhahn, Olav; Ebert, Volker

2018-06-01

The effects of thermal boundary layers on tunable diode laser absorption spectroscopy (TDLAS) measurement results must be quantified when using the line-of-sight (LOS) TDLAS under conditions with spatial temperature gradient. In this paper, a new methodology based on spectral simulation is presented quantifying the LOS TDLAS measurement deviation under conditions with thermal boundary layers. The effects of different temperature gradients and thermal boundary layer thickness on spectral collisional widths and gas concentration measurements are quantified. A CO 2 TDLAS spectrometer, which has two gas cells to generate the spatial temperature gradients, was employed to validate the simulation results. The measured deviations and LOS averaged collisional widths are in very good agreement with the simulated results for conditions with different temperature gradients. We demonstrate quantification of thermal boundary layers' thickness with proposed method by exploitation of the LOS averaged the collisional width of the path-integrated spectrum.
Designing Adaptive Instructional Environments: Insights from Empirical Evidence

DTIC Science & Technology

2011-10-01

theorems. Cohen’s f effect size for pretest to posttest gain, averaged across different problems = 0.46. 7 Basis for Adaptation Ability of...problems and took a posttest . Measures of Learning 26-item multiple choice pretest and posttest . Effect size on posttest scores as measured by...solving algebraic equations. Measures of Learning Pretest and posttest using rapid diagnostic testing procedure: Student had to provide their
Photon Counting Techniques Applied to Single Aerosol Particle Spectroscopy.

NASA Astrophysics Data System (ADS)

Joynson, Steven

Available from UMI in association with The British Library. Optical effects on single airborne particles were examined for their potential use in aerosol characterisation. All phenomena arising from the elastic or quasi-elastic scattering, or the absorption of light were considered. A survey of published research identified the effects that have so far been proposed and investigated by other researchers. The feasibility of using these effects is then discussed and appropriate calculations and measurements made. After reviewing the classical theory of the interaction of light with small particles it was apparent that there was a number of other effects that had not yet been considered or examined by other researchers. Calculations and measurements of these effects were then made and are also presented here. The effects were examined optically using photon counting equipment to count and store the dynamic light scattering signals from a single particles in an aerosol flow. The measurement thus entailed using a low intensity probe beam to measure the effects of higher intensity pump radiation on the motion, shape and scattering properties of a test particle. The amount of information in the probe signal was increased by using a velocimetry arrangement. In the absence of suitable commercially available photon counting equipment a new system had to be designed and developed at RMCS. Although requiring much time and effort to develop, the equipment allowed a new approach to light scattering research. The successful operation of the equipment was confirmed by the good agreement found when comparing measured photon count series statistics with those of the simulated signals presented by other researchers. Experiments that were done to measure some of the optical effects are described and the results presented. They demonstrate the successful diffusion sizing of individual aerosol particles and their motion under radiation pressure. Further experimental results demonstrate the measurement of radiation absorption by the thermally-increased diffusion rate. Other results provide evidence for what appears to be the explosive vapourisation of material at the peak radiation absorption centres of a liquid droplet. Finally, the uses and limitations of the techniques are summarised and proposals are made for further research.
A new proportion measure of the treatment effect captured by candidate surrogate endpoints.

PubMed

Kobayashi, Fumiaki; Kuroki, Manabu

2014-08-30

The use of surrogate endpoints is expected to play an important role in the development of new drugs, as they can be used to reduce the sample size and/or duration of randomized clinical trials. Biostatistical researchers and practitioners have proposed various surrogacy measures; however, (i) most of these surrogacy measures often fall outside the range [0,1] without any assumptions, (ii) these surrogacy measures do not provide a cut-off value for judging a surrogacy level of candidate surrogate endpoints, and (iii) most surrogacy measures are highly variable; thus, the confidence intervals are often unacceptably wide. In order to solve problems (i) and (ii), we propose a new surrogacy measure, a proportion of the treatment effect captured by candidate surrogate endpoints (PCS), on the basis of the decomposition of the treatment effect into parts captured and non-captured by the candidate surrogate endpoints. In order to solve problem (iii), we propose an estimation method based on the half-range mode method with the bootstrap distribution of the estimated surrogacy measures. Finally, through numerical experiments and two empirical examples, we show that the PCS with the proposed estimation method overcomes these difficulties. The results of this paper contribute to the reliable evaluation of how much of the treatment effect is captured by candidate surrogate endpoints. Copyright © 2014 John Wiley & Sons, Ltd.
Calibration-free self-absorption model for measuring nitric oxide concentration in a pulsed corona discharge.

PubMed

Du, Yanjun; Ding, Yanjun; Liu, Yufeng; Lan, Lijuan; Peng, Zhimin

2014-08-01

The effect of self-absorption on emission intensity distributions can be used for species concentration measurements. A calculation model is developed based on the Beer-Lambert law to quantify this effect. And then, a calibration-free measurement method is proposed on the basis of this model by establishing the relationship between gas concentration and absorption strength. The effect of collision parameters and rotational temperature on the method is also discussed. The proposed method is verified by investigating the nitric oxide emission bands (A²Σ⁺→X²∏) that are generated by a pulsed corona discharge at various gas concentrations. Experiment results coincide well with the expectations, thus confirming the precision and accuracy of the proposed measurement method.
Airborne Solar Radiant Flux Measurements During ACE-2

NASA Technical Reports Server (NTRS)

Bergstrom, Robert W.; Russell, Philip B.; Jonsson, Haflidi

2000-01-01

Aerosol effects on atmospheric radiative fluxes provide a forcing function that can change the climate in potentially significant ways. This aerosol radiative forcing is a major source of uncertainty in understanding the climate change of the past century and predicting future climate. To help reduce this uncertainty, the 1996 Tropospheric Aerosol Radiative Forcing Observational Experiment (TARFOX) and the 1997 Aerosol Characterization Experiment (ACE-2) measured the properties and radiative effects of aerosols over the Atlantic Ocean. In the ACE 2 program the solar radiant fluxes were measured on the Pelican aircraft and the UK Met Office C130. This poster will show results from the measurements for the aerosol effects during the clear column days. We will compare the results with calculations of the radiant fluxes.
[Effect of comprehensive schistosomiasis control measures with focus on buffalo and sheep removal in Anxiang County].

PubMed

Li, Xiao-Song; Li, Fei-Yue; Zhu, Shao-Ping; Zhou, Yi-Biao; Yi, Ping; Luo, Zhi-Hong; Ren, Guang-Hui; Li, Yi-Yi; Tang, Ling; Jiang, Qing-Wu

2013-06-01

To understand the effect of comprehensive schistosomiasis control measures with focus on buffalo and sheep removal in Anxiang City, Dongting Lake area. The data of buffalo and sheep removal, routine schistosomiasis control measures such as disease detection and treatment, Oncomelania snail survey and control, as well as health education were collected and analyzed in Anxiang County, Hunan Province from 2004 to 2012. The schistosome infection rates of people, domestic animals and snails decreased from 11.23%, 17.06% and 1.07% in 2004 when the comprehensive measures had not been implemented to 0.58%, 0 and 0 in 2012, respectively. The average density of infected snails decreased from 0.003 4 snails/0.1 m2 to 0. The comprehensive control measures with focus on buffalo and sheep removal are significantly effective, and can control the transmission of schistosomiasis in marshland and lake regions.
Assessing fitness-for-duty and predicting performance with cognitive neurophysiological measures

NASA Astrophysics Data System (ADS)

Smith, Michael E.; Gevins, Alan

2005-05-01

Progress is described in developing a novel test of neurocognitive status for fitness-for-duty testing. The Sustained Attention & Memory (SAM) test combines neurophysiologic (EEG) measures of brain activation with performance measures during a psychometric test of sustained attention and working memory, and then gauges changes in neurocognitive status relative to an individual"s normative baseline. In studies of the effects of common psychoactive substances that can affect job performance, including sedating antihistamines, caffeine, alcohol, marijuana, and prescription medications, test sensitivity was greater for the combined neurophysiological and performance measures than for task performance measures by themselves. The neurocognitive effects of overnight sleep deprivation were quite evident, and such effects predicted subsequent performance impairment on a flight simulator task. Sensitivity to diurnal circadian variations was also demonstrated. With further refinement and independent validation, the SAM Test may prove useful for assessing readiness-to-perform in high-asset personnel working in demanding, high risk situations.
Antigenic Distance Measurements for Seasonal Influenza Vaccine Selection

PubMed Central

Cai, Zhipeng; Zhang, Tong; Wan, Xiu-Feng

2011-01-01

Influenza vaccination is one of the major options to counteract the effects of influenza diseases. Selection of an effective vaccine strain is the key to the success of an effective vaccination program since vaccine protection can only be achieved when the selected influenza vaccine strain matches the antigenic variants causing future outbreaks. Identification of an antigenic variant is the first step to determine whether vaccine strain needs to be updated. Antigenic distance derived from immunological assays, such as hemagglutination inhibition, is commonly used to measure the antigenic closeness between circulating strains and the current influenza vaccine strain. Thus, consensus on an explicit and robust antigenic distance measurement is critical in influenza surveillance. Based on the current seasonal influenza surveillance procedure, we propose and compare three antigenic distance measurements, including Average antigenic distance (A-distance), Mutual antigenic distance (M-distance), and Largest antigenic distance (L-distance). With the assistance of influenza antigenic cartography, our simulation results demonstrated that M-distance is a robust influenza antigenic distance measurement. Experimental results on both simulation and seasonal influenza surveillance data demonstrate that M-distance can be effectively utilized in influenza vaccine strain selection. PMID:22063385
Hysteresis in Carbon Nanotube Transistors: Measurement and Analysis of Trap Density, Energy Level, and Spatial Distribution.

PubMed

Park, Rebecca Sejung; Shulaker, Max Marcel; Hills, Gage; Suriyasena Liyanage, Luckshitha; Lee, Seunghyun; Tang, Alvin; Mitra, Subhasish; Wong, H-S Philip

2016-04-26

We present a measurement technique, which we call the Pulsed Time-Domain Measurement, for characterizing hysteresis in carbon nanotube field-effect transistors, and demonstrate its applicability for a broad range of 1D and 2D nanomaterials beyond carbon nanotubes. The Pulsed Time-Domain Measurement enables the quantification (density, energy level, and spatial distribution) of charged traps responsible for hysteresis. A physics-based model of the charge trapping process for a carbon nanotube field-effect transistor is presented and experimentally validated using the Pulsed Time-Domain Measurement. Leveraging this model, we discover a source of traps (surface traps) unique to devices with low-dimensional channels such as carbon nanotubes and nanowires (beyond interface traps which exist in today's silicon field-effect transistors). The different charge trapping mechanisms for interface traps and surface traps are studied based on their temperature dependencies. Through these advances, we are able to quantify the interface trap density for carbon nanotube field-effect transistors (∼3 × 10(13) cm(-2) eV(-1) near midgap), and compare this against a range of previously studied dielectric/semiconductor interfaces.

Models and techniques for evaluating the effectiveness of aircraft computing systems

NASA Technical Reports Server (NTRS)

Meyer, J. F.

1977-01-01

Models, measures and techniques were developed for evaluating the effectiveness of aircraft computing systems. The concept of effectiveness involves aspects of system performance, reliability and worth. Specifically done was a detailed development of model hierarchy at mission, functional task, and computational task levels. An appropriate class of stochastic models was investigated which served as bottom level models in the hierarchial scheme. A unified measure of effectiveness called 'performability' was defined and formulated.
Investigation of phase distribution using PhameÂ® in-die phase measurements

NASA Astrophysics Data System (ADS)

Buttgereit, Ute; Perlitz, Sascha

2009-03-01

As lithography mask processes move toward 45nm and 32nm node, mask complexity increases steadily, mask specifications tighten and process control becomes extremely important. Driven by this fact the requirements for metrology tools increase as well. Efforts in metrology have been focused on accurately measuring CD linearity and uniformity across the mask, and accurately measuring phase variation on Alternating/Attenuated PSM and transmission for Attenuated PSM. CD control on photo masks is usually done through the following processes: exposure dose/focus change, resist develop and dry etch. The key requirement is to maintain correct CD linearity and uniformity across the mask. For PSM specifically, the effect of CD uniformity for both Alternating PSM and Attenuated PSM and etch depth for Alternating PSM becomes also important. So far phase measurement has been limited to either measuring large-feature phase using interferometer-based metrology tools or measuring etch depth using AFM and converting etch depth into phase under the assumption that trench profile and optical properties of the layers remain constant. However recent investigations show that the trench profile and optical property of layers impact the phase. This effect is getting larger for smaller CD's. The currently used phase measurement methods run into limitations because they are not able to capture 3D mask effects, diffraction limitations or polarization effects. The new phase metrology system - Phame(R) developed by Carl Zeiss SMS overcomes those limitations and enables laterally resolved phase measurement in any kind of production feature on the mask. The resolution of the system goes down to 120nm half pitch at mask level. We will report on tool performance data with respect to static and dynamic phase repeatability focusing on Alternating PSM. Furthermore the phase metrology system was used to investigate mask process signatures on Alternating PSM in order to further improve the overall PSM process performance. Especially global loading effects caused by the pattern density and micro loading effects caused by the feature size itself have been evaluated using the capability of measuring phase in the small production features. The results of this study will be reported in this paper.
Optical properties monitor: Experiment definition phase

NASA Technical Reports Server (NTRS)

Wilkes, Donald R.; Bennett, Jean M.; Hummer, Leigh L.; Chipman, Russell A.; Hadaway, James B.; Pezzaniti, Larry

1990-01-01

The stability of materials used in the space environment will continue to be a limiting technology for space missions. The Optical Properties Monitor (OPM) Experiment provides a comprehensive space research program to study the effects of the space environment (both natural and induced) on optical, thermal and space power materials. The OPM Experiment was selected for definition under the NASA/OAST In-Space Technology Experiment Program. The results of the OPM Definition Phase are presented. The OPM experiment will expose selected materials to the space environment and measure the effects with in-space optical measurements. In-space measurements include total hemispherical reflectance total integrated scatter and VUV reflectance/transmittance. The in-space measurements will be augmented with extensive pre- and post-flight sample measurements to determine other optical, mechanical, electrical, chemical or surface effects of space exposure. Environmental monitors will provide the amount and time history of the sample exposure to solar irradiation, atomic oxygen and molecular contamination.
Optical properties monitor: Experiment definition phase

NASA Technical Reports Server (NTRS)

Wilkes, Donald R.; Bennett, Jean M.; Hummer, Leigh L.; Chipman, Russell A.; Hadaway, James B.; Pezzaniti, Larry

1989-01-01

The stability of materials used in the space environment will continue to be a limiting technology for space missions. The Optical Properties Monitor (OPM) Experiment provides a comprehensive space research program to study the effects of the space environment-both natural and induced-on optical, thermal and space power materials. The OPM Experiment was selected for definition under the NASA/OAST In-Space Technology Experiment Program. The results of the OPM Definition Phase are presented. The OPM Experiment will expose selected materials to the space environment and measure the effects with in-space optical measurements. In-space measurements include total hemispherical reflectance total integrated scatter and VUV reflectance/transmittance. The in-space measurements will be augmented with extensive pre- and post-flight sample measurements to determine other optical, mechanical, electrical, chemical or surface effects of space exposure. Environmental monitors will provide the amount and time history of the sample exposure to solar irradiation, atomic oxygen and molecular contamination.
Tilt measurement using inclinometer based on redundant configuration of MEMS accelerometers

NASA Astrophysics Data System (ADS)

Lu, Jiazhen; Liu, Xuecong; Zhang, Hao

2018-05-01

Inclinometers are widely used in tilt measurement and their required accuracy is becoming ever higher. Most existing methods can effectively work only when the tilt is less than 60°, and the accuracy still can be improved. A redundant configuration of micro-electro mechanical system accelerometers is proposed in this paper and a least squares method and data processing normalization are used. A rigorous mathematical derivation is given. Simulation and experiment are used to verify its feasibility. The results of a Monte Carlo simulation, repeated 3000 times, and turntable reference experiments have shown that the tilt measure range can be expanded to 0°–90° by this method and that the measurement accuracy of θ can be improved by more than 10 times and the measurement accuracy of γ can be also improved effectively. The proposed method is proved to be effective and significant in practical application.
SU-E-T-145: Effects of Temporary Tachytherapy Inhibition Magnet On MOSFET Dose Measurements of Cardiovascular Implantable Electronic Devices (CIED) in Radiation Therapy Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

P, Joshi; Salomons, G; Kerr, A

2014-06-01

Purpose: To determine the effects of temporary tachytherapy inhibition magnet on MOSFET dose measurements of cardiovascular implantable electronic devices (CIED) in radiation therapy patients. Methods: Infield and peripheral MOSFET dose measurements with 6MV photon beams were performed to evaluate dose to a CIED in the presence of a doughnut shaped temporary tachytherapy inhibition magnet. Infield measurements were done to quantify the effects of the magnetic field alone and shielding by the magnet. MOSFETs were placed inside a 20×20cm{sup 2} field at a depth of 3cm in the isocentre plane in the presence and absence of the magnet. Peripheral dose measurementsmore » were done to determine the impact of the magnet on dose to the CIED in a clinical setting. These measurements were performed at the centre, under the rim and half way between a 10×10cm{sup 2} field edge and the magnet with MOSFETS placed at the surface, 0.5cm and 1cm depths in the presence and absence of the magnet. Results: Infield measurements showed that effects of magnetic field on the MOSFET readings were within the 2% MOSFET dose measurement uncertainty; a 20% attenuation of dose under the magnet rim was observed. Peripheral dose measurements at the centre of the magnet show an 8% increase in surface dose and a 6% decrease in dose at 1cm depth. Dose under the magnet rim was reduced by approximately 68%, 45% and 25% for MOSFET placed at 0.0, 0.5 and 1.0cm bolus depths, respectively. Conclusions: The magnetic field has an insignificant effect on MOSFET dose measurements. Dose to the central region of CIED represented by centre of the magnet doughnut increases at the surface, and decreases at depths due to low energy scattering contributions from the magnet. Dose under the magnet rim, representing CIED edges, decreased significantly due to shielding.« less
Measuring the quality-of-life effects of diagnostic and screening tests.

PubMed

Swan, J Shannon; Miksad, Rebecca A

2009-08-01

Health-related quality of life (HRQL) is a central concept for understanding the outcomes of medical care. When used in cost-effectiveness analysis, HRQL is typically measured for conditions persisting over long time frames (years), and quality-adjusted life year (QALY) values are generated. Consequently, years are the basic unit of time for cost-effectiveness analysis results: dollars spent per QALY gained. However, shorter term components of health care may also affect HRQL, and there is increased interest in measuring and accounting for these events. In radiology, the short-term HRQL effects of screening and diagnostic testing may affect a test's cost-effectiveness, even though they may only last for days. The unique challenge in radiology HRQL assessment is to realistically tap into the testing and screening experience while remaining consistent with QALY theory. The authors review HRQL assessment and highlight methods developed to specifically address the short-term effects of radiologic screening and testing.
Slope Error Measurement Tool for Solar Parabolic Trough Collectors: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stynes, J. K.; Ihas, B.

2012-04-01

The National Renewable Energy Laboratory (NREL) has developed an optical measurement tool for parabolic solar collectors that measures the combined errors due to absorber misalignment and reflector slope error. The combined absorber alignment and reflector slope errors are measured using a digital camera to photograph the reflected image of the absorber in the collector. Previous work using the image of the reflection of the absorber finds the reflector slope errors from the reflection of the absorber and an independent measurement of the absorber location. The accuracy of the reflector slope error measurement is thus dependent on the accuracy of themore » absorber location measurement. By measuring the combined reflector-absorber errors, the uncertainty in the absorber location measurement is eliminated. The related performance merit, the intercept factor, depends on the combined effects of the absorber alignment and reflector slope errors. Measuring the combined effect provides a simpler measurement and a more accurate input to the intercept factor estimate. The minimal equipment and setup required for this measurement technique make it ideal for field measurements.« less
Predicting S-wave velocities for unconsolidated sediments at low effective pressure

USGS Publications Warehouse

Lee, Myung W.

2010-01-01

Accurate S-wave velocities for shallow sediments are important in performing a reliable elastic inversion for gas hydrate-bearing sediments and in evaluating velocity models for predicting S-wave velocities, but few S-wave velocities are measured at low effective pressure. Predicting S-wave velocities by using conventional methods based on the Biot-Gassmann theory appears to be inaccurate for laboratory-measured velocities at effective pressures less than about 4-5 megapascals (MPa). Measured laboratory and well log velocities show two distinct trends for S-wave velocities with respect to P-wave velocity: one for the S-wave velocity less than about 0.6 kilometer per second (km/s) which approximately corresponds to effective pressure of about 4-5 MPa, and the other for S-wave velocities greater than 0.6 km/s. To accurately predict S-wave velocities at low effective pressure less than about 4-5 MPa, a pressure-dependent parameter that relates the consolidation parameter to shear modulus of the sediments at low effective pressure is proposed. The proposed method in predicting S-wave velocity at low effective pressure worked well for velocities of water-saturated sands measured in the laboratory. However, this method underestimates the well-log S-wave velocities measured in the Gulf of Mexico, whereas the conventional method performs well for the well log velocities. The P-wave velocity dispersion due to fluid in the pore spaces, which is more pronounced at high frequency with low effective pressures less than about 4 MPa, is probably a cause for this discrepancy.
A Universal Noninvasive Continuous Blood Pressure Measurement System for Remote Healthcare Monitoring.

PubMed

Mukherjee, Ramtanu; Ghosh, Sanchita; Gupta, Bharat; Chakravarty, Tapas

2018-01-22

The effectiveness of any remote healthcare monitoring system depends on how much accurate, patient-friendly, versatile, and cost-effective measurement it is delivering. There has always been a huge demand for such a long-term noninvasive remote blood pressure (BP) measurement system, which could be used worldwide in the remote healthcare industry. Thus, noninvasive continuous BP measurement and remote monitoring have become an emerging area in the remote healthcare industry. Photoplethysmography-based (PPG) BP measurement is a continuous, unobtrusive, patient-friendly, and cost-effective solution. However, BP measurements through PPG sensors are not much reliable and accurate due to some major limitations like pressure disturbance, motion artifacts, and variations in human skin tone. A novel reflective PPG sensor has been developed to eliminate the abovementioned pressure disturbance and motion artifacts during the BP measurement. Considering the variations of the human skin tone across demography, a novel algorithm has been developed to make the BP measurement accurate and reliable. The training dataset captured 186 subjects' data and the trial dataset captured another new 102 subjects' data. The overall accuracy achieved by using the proposed method is nearly 98%. Thus, demonstrating the efficacy of the proposed method. The developed BP monitoring system is quite accurate, reliable, cost-effective, handy, and user friendly. It is also expected that this system would be quite useful to monitor the BP of infants, elderly people, patients having wounds, burn injury, or in the intensive care unit environment.
Repeatability, Reproducibility, Separative Power and Subjectivity of Different Fish Morphometric Analysis Methods

PubMed Central

Takács, Péter

2016-01-01

We compared the repeatability, reproducibility (intra- and inter-measurer similarity), separative power and subjectivity (measurer effect on results) of four morphometric methods frequently used in ichthyological research, the “traditional” caliper-based (TRA) and truss-network (TRU) distance methods and two geometric methods that compare landmark coordinates on the body (GMB) and scales (GMS). In each case, measurements were performed three times by three measurers on the same specimen of three common cyprinid species (roach Rutilus rutilus (Linnaeus, 1758), bleak Alburnus alburnus (Linnaeus, 1758) and Prussian carp Carassius gibelio (Bloch, 1782)) collected from three closely-situated sites in the Lake Balaton catchment (Hungary) in 2014. TRA measurements were made on conserved specimens using a digital caliper, while TRU, GMB and GMS measurements were undertaken on digital images of the bodies and scales. In most cases, intra-measurer repeatability was similar. While all four methods were able to differentiate the source populations, significant differences were observed in their repeatability, reproducibility and subjectivity. GMB displayed highest overall repeatability and reproducibility and was least burdened by measurer effect. While GMS showed similar repeatability to GMB when fish scales had a characteristic shape, it showed significantly lower reproducability (compared with its repeatability) for each species than the other methods. TRU showed similar repeatability as the GMS. TRA was the least applicable method as measurements were obtained from the fish itself, resulting in poor repeatability and reproducibility. Although all four methods showed some degree of subjectivity, TRA was the only method where population-level detachment was entirely overwritten by measurer effect. Based on these results, we recommend a) avoidance of aggregating different measurer’s datasets when using TRA and GMS methods; and b) use of image-based methods for morphometric surveys. Automation of the morphometric workflow would also reduce any measurer effect and eliminate measurement and data-input errors. PMID:27327896
Micro-scale temperature measurement method using fluorescence polarization

NASA Astrophysics Data System (ADS)

Tatsumi, K.; Hsu, C.-H.; Suzuki, A.; Nakabe, K.

2016-09-01

A novel method that can measure the fluid temperature in microscopic scale by measuring the fluorescence polarization is described in this paper. The measurement technique is not influenced by the quenching effects which appears in conventional LIF methods and is believed to show a higher reliability in temperature measurements. Experiment was performed using a microchannel flow and fluorescent molecule probes, and the effects of the fluid temperature, fluid viscosity, measurement time, and pH of the solution on the measured fluorescence polarization degree are discussed to understand the basic characteristics of the present method. The results showed that fluorescence polarization is considerably less sensible to these quenching factors. A good correlation with the fluid temperature, on the other hand, was obtained and agreed well with the theoretical values confirming the feasibility of the method.
Validating an Observation Protocol to Measure Special Education Teacher Effectiveness

ERIC Educational Resources Information Center

Johnson, Evelyn S.; Semmelroth, Carrie L.

2015-01-01

This study used Kane's (2013) Interpretation/Use Argument (IUA) to measure validity on the Recognizing Effective Special Education Teachers (RESET) observation tool. The RESET observation tool is designed to evaluate special education teacher effectiveness using evidence-based instructional practices as the basis for evaluation. In alignment with…
GPS measurement error gives rise to spurious 180 degree turning angles and strong directional biases in animal movement data.

PubMed

Hurford, Amy

2009-05-20

Movement data are frequently collected using Global Positioning System (GPS) receivers, but recorded GPS locations are subject to errors. While past studies have suggested methods to improve location accuracy, mechanistic movement models utilize distributions of turning angles and directional biases and these data present a new challenge in recognizing and reducing the effect of measurement error. I collected locations from a stationary GPS collar, analyzed a probabilistic model and used Monte Carlo simulations to understand how measurement error affects measured turning angles and directional biases. Results from each of the three methods were in complete agreement: measurement error gives rise to a systematic bias where a stationary animal is most likely to be measured as turning 180 degrees or moving towards a fixed point in space. These spurious effects occur in GPS data when the measured distance between locations is <20 meters. Measurement error must be considered as a possible cause of 180 degree turning angles in GPS data. Consequences of failing to account for measurement error are predicting overly tortuous movement, numerous returns to previously visited locations, inaccurately predicting species range, core areas, and the frequency of crossing linear features. By understanding the effect of GPS measurement error, ecologists are able to disregard false signals to more accurately design conservation plans for endangered wildlife.
Effect of Speed of Processing Training on Older Driver Screening Measures.

PubMed

Eramudugolla, Ranmalee; Kiely, Kim M; Chopra, Sidhant; Anstey, Kaarin J

2017-01-01

Objective: Computerized training for cognitive enhancement is of great public interest, however, there is inconsistent evidence for the transfer of training gains to every day activity. Several large trials have focused on speed of processing (SOP) training with some promising findings for long-term effects on daily activity, but no immediate transfer to other cognitive tests. Here, we examine the transfer of SOP training gains to cognitive measures that are known predictors of driving safety in older adults. Methods: Fifty-three adults aged 65-87 years who were current drivers participated in a two group non-randomized design with repeated measures and a no-contact matched control group. The Intervention group completed an average of 7.9 ( SD = 3.0) hours of self-administered online SOP training at home. Control group was matched on age, gender and test-re-test interval. Measures included the Useful Field of View (UFOV) test, a Hazard Perception test, choice reaction time (Cars RT), Trail Making Test B, a Maze test, visual motion threshold, as well as road craft and road knowledge tests. Results: Speed of processing training resulted in significant improvement in processing speed on the UFOV test relative to controls, with an average change of -45.8 ms ( SE = 14.5), and effect size of ω 2 = 0.21. Performance on the Maze test also improved, but significant slowing on the Hazard Perception test was observed after SOP training. Training effects on the UFOV task was associated with similar effects on the Cars RT, but not the Hazard Perception and Maze tests, suggesting transfer to some but not all driving related measures. There were no effects of training on any of the other measures examined. Conclusion: Speed of processing training effects on the UFOV task can be achieved with self-administered, online training at home, with some transfer to other cognitive tests. However, differential effects of training may be observed for tasks requiring goal-directed search strategies rather than diffuse attention.
Most efficient questionnaires to measure quality of life, physical function, and pain in patients with metastatic spine disease: a cross-sectional prospective survey study.

PubMed

Paulino Pereira, Nuno Rui; Janssen, Stein J; Raskin, Kevin A; Hornicek, Francis J; Ferrone, Marco L; Shin, John H; Bramer, Jos A M; van Dijk, Cornelis Nicolaas; Schwab, Joseph H

2017-07-01

Assessing quality of life, functional outcome, and pain has become important in assessing the effectiveness of treatment for metastatic spine disease. Many questionnaires are able to measure these outcomes; few are validated in patients with metastatic spine disease. As a result, there is no consensus on the ideal questionnaire to use in these patients. Our study aim was to assess whether certain questionnaires measuring quality of life, functional outcome, and pain (1) correlated with each other, (2) measured the construct they claim to measure, (3) had good coverage-floor and ceiling effects, (4) were reliable, and (5) whether there were differences in completion time between them. This is a prospective cross-sectional survey study from three outpatient clinics (two orthopedic oncology clinics and one neurosurgery clinic) from two affiliated tertiary hospital care centers. We included 100 consecutive patients with metastatic spine disease between July 2014 and February 2016. We excluded non-English-speaking patients. The following questionnaires were given in random order: Oswestry Disability Index (ODI) or Neck Disability Index (NDI), Patient-Reported Outcomes Measurement Information System (PROMIS) Physical Function, PROMIS Pain Intensity, EuroQol-5 Dimensions (EQ-5D), and the Spine Oncology Study Group Outcome Questionnaire (SOSG-OQ). We used exploratory factor analysis-correlating questionnaires with an underlying mathematically derived trait-to assess if questionnaires measured the same concept. Coverage was assessed by floor and ceiling effects, and reliability was assessed by standard error of measurement as a function of ability. Differences in completion times were tested using the Friedman test. Questionnaires measured the construct they were developed for, as demonstrated with high correlations (>0.7) with the underlying trait. A floor effect was present in the PROMIS Pain Intensity (7.0%), ODI or NDI (4.0%), and the PROMIS Physical Function (1.0%) questionnaires. A ceiling effect was present in the EQ-5D questionnaire (6.0%). The SOSG-OQ had no floor or ceiling effect. The PROMIS Physical Function and PROMIS Pain Intensity proved to be the most reliable, whereas the EQ-5D was the least reliable. Completion time differed among questionnaires (p<.001) and was shortest for the PROMIS Pain Intensity (median 24 seconds) and PROMIS Physical Function (median 42 seconds). In patients with metastatic spine disease, we recommend the SOSG-OQ for measuring quality of life, the PROMIS Physical Function for measuring physical function, and the PROMIS Pain Intensity for measuring pain. Published by Elsevier Inc.
Electrets used to measure exhaust cloud effluents from Solid Rocket Motor (SRM) during demonstration model (DM-2) static test firing

NASA Technical Reports Server (NTRS)

Susko, M.

1978-01-01

Electrets were compared with fixed flow samplers during static test firing. The measurement of the rocket exhaust effluents by samplers and electrets indicated that the Solid Rocket Motor had no significant effect on the air quality in the area sampled. The results show that the electrets (a passive device which needs no power) can be used effectively alongside existing measuring devices (which need power). By placing electrets in areas where no power is available, measurements may be obtained. Consequently, it is a valuable complementary instrument in measuring rocket exhaust effluents in areas where other measuring devices may not be able to assess the contaminants.
High-Temperature Hall-Effect Apparatus

NASA Technical Reports Server (NTRS)

Wood, C.; Lockwood, R. A.; Chemielewski, A. B.; Parker, J. B.; Zoltan, A.

1985-01-01

Compact furnace minimizes thermal gradients and electrical noise. Semiautomatic Hall-effect apparatus takes measurements on refractory semiconductors at temperatures as high as 1,100 degrees C. Intended especially for use with samples of high conductivity and low chargecarrier mobility that exhibit low signal-to-noise ratios, apparatus carefully constructed to avoid spurious electromagnetic and thermoelectric effects that further degrade measurements.
Local effect of compression stockings on skin microcirculatory activity through the measurement of skin effective thermal conductivity.

PubMed

Grenier, Etienne; Gehin, Claudine; Lun, Bertrand; McAdams, Eric

2013-01-01

This paper presents a preliminary study to demonstrate the instantaneous local effect of compression stocking (Class 2) on skin microcirculatory activity. The measurement needs to be carefully performed as the sensor is placed under the garment. To assess the local effect of compression stockings, we use the ambulatory device Hematron located on the calf under the garment. Skin microcirculatory activity is assessed through the skin's effective thermal conductivity measurement. A specific housing for the sensor has been designed to avoid excessive pressure induced by the sensor when squeezed by stockings. The experiment, conducted on ten healthy subjects, comprised two stages: without and with compression stockings. Skin effective thermal conductivity was recorded at three successive positions (supine, sitting and standing). Significant improvement in skin microcirculatory activity was recorded by the Hematron device for the three positions. We have also demonstrated that Hematron sensor can be used under compression stockings.
Development of a new densimeter for the combined investigation of dew-point densities and sorption phenomena of fluid mixtures

NASA Astrophysics Data System (ADS)

Moritz, Katharina; Kleinrahm, Reiner; McLinden, Mark O.; Richter, Markus

2017-12-01

For the determination of dew-point densities and pressures of fluid mixtures, a new densimeter has been developed. The new apparatus is based on the well-established two-sinker density measurement principle with the additional capability of quantifying sorption effects. In the vicinity of the dew line, such effects cause a change in composition of the gas mixture under study, which can significantly distort accurate density measurements. The new experimental technique enables the accurate measurement of dew-point densities and pressures and the quantification of sorption effects at the same time.

The relative importance of aerosol scattering and absorption in remote sensing

NASA Technical Reports Server (NTRS)

Fraser, R. S.; Kaufman, Y. J.

1985-01-01

Previous attempts to explain the effect of aerosols on satellite measurements of surface properties for the visible and near-infrared spectrum have emphasized the amount of aerosols without consideration of their absorption properties. In order to estimate the importance of absorption, the radiances of the sunlight scattered from models of the earth-atmosphere system are computed as functions of the aerosol optical thickness and absorption. The absorption effect is small where the surface reflectance is weak, but is important for strong reflectance. These effects on classification of surface features, measuring vegetation index, and measuring surface reflectance are presented.
Study of the effective point of measurement for ion chambers in electron beams by Monte Carlo simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, L. L. W.; Rogers, D. W. O.

In current dosimetry protocols for electron beams, for plane-parallel chambers, the effective point of measurement is at the front face of the cavity, and, for cylindrical chambers, it is at a point shifted 0.5r upstream from the cavity center. In this study, Monte Carlo simulations are employed to study the issue of effective point of measurement for both plane-parallel chambers and cylindrical thimble chambers in electron beams. It is found that there are two ways of determining the position of the effective point of measurement: One is to match the calculated depth-ionization curve obtained from a modeled chamber to amore » calculated depth-dose curve; the other is to match the electron fluence spectrum in the chamber cavity to that in the phantom. For plane-parallel chambers, the effective point of measurement determined by the first method is generally not at the front face of the chamber cavity, which is obtained by the second method, but shifted downstream toward the cavity center by an amount that could be larger than one-half a millimeter. This should not be ignored when measuring depth-dose curves in electron beams. For cylindrical chambers, these two methods also give different positions of the effective point of measurement: The first gives a shift of 0.5r, which is in agreement with measurements for high-energy beams and is the same as the value currently used in major dosimetry protocols; the latter gives a shift of 0.8r, which is closer to the value predicted by a theoretical calculation assuming no-scatter conditions. The results also show that the shift of 0.8r is more appropriate if the cylindrical chamber is to be considered as a Spencer-Attix cavity. In electron beams, since the water/air stopping-power ratio changes with depth in a water phantom, the difference of the two shifts (0.3r) will lead to an incorrect evaluation of the water/air stopping-power ratio at the point of measurement, thus resulting in a systematic error in determining the absorbed dose by cylindrical chambers. It is suggested that a shift of 0.8r be used for electron beam calibrations with cylindrical chambers and a shift of 0.4r-0.5r be used for depth-dose measurements.« less
Study of the effective point of measurement for ion chambers in electron beams by Monte Carlo simulation.

PubMed

Wang, L L W; Rogers, D W O

2009-06-01

In current dosimetry protocols for electron beams, for plane-parallel chambers, the effective point of measurement is at the front face of the cavity, and, for cylindrical chambers, it is at a point shifted 0.5r upstream from the cavity center. In this study, Monte Carlo simulations are employed to study the issue of effective point of measurement for both plane-parallel chambers and cylindrical thimble chambers in electron beams. It is found that there are two ways of determining the position of the effective point of measurement: One is to match the calculated depth-ionization curve obtained from a modeled chamber to a calculated depth-dose curve; the other is to match the electron fluence spectrum in the chamber cavity to that in the phantom. For plane-parallel chambers, the effective point of measurement determined by the first method is generally not at the front face of the chamber cavity, which is obtained by the second method, but shifted downstream toward the cavity center by an amount that could be larger than one-half a millimeter. This should not be ignored when measuring depth-dose curves in electron beams. For cylindrical chambers, these two methods also give different positions of the effective point of measurement: The first gives a shift of 0.5r, which is in agreement with measurements for high-energy beams and is the same as the value currently used in major dosimetry protocols; the latter gives a shift of 0.8r, which is closer to the value predicted by a theoretical calculation assuming no-scatter conditions. The results also show that the shift of 0.8r is more appropriate if the cylindrical chamber is to be considered as a Spencer-Attix cavity. In electron beams, since the water/air stopping-power ratio changes with depth in a water phantom, the difference of the two shifts (0.3r) will lead to an incorrect evaluation of the water/air stopping-power ratio at the point of measurement, thus resulting in a systematic error in determining the absorbed dose by cylindrical chambers. It is suggested that a shift of 0.8r be used for electron beam calibrations with cylindrical chambers and a shift of 0.4r-0.5r be used for depth-dose measurements.
Effect of air gap on apparent temperature of body wearing various sizes of T-shirt

NASA Astrophysics Data System (ADS)

Takatera, M.; Uchiyama, E.; Zhu, C.; Kim, KO; Ishizawa, H.

2017-10-01

We investigated the effect of air gap on the apparent temperature. Using the developed thermocouple fabric and a thermal manikin, we measured temperature distribution of the measuring garments due to the change of T-shirt sizes. We were able to measure the apparent temperature distribution at points near a body while wearing different sizes of T-shirts. It was observed that the temperature distribution depending on different air gap between clothing and body. The apparent temperature depends on garment size and place. The effect of air gap on apparent temperature of body was experimentally confirmed.
The Anticipated Effects of Alcohol Scale: Development and Psychometric Evaluation of a Novel Assessment Tool for Measuring Alcohol Expectancies

ERIC Educational Resources Information Center

Morean, Meghan E.; Corbin, William R.; Treat, Teresa A.

2012-01-01

Alcohol expectancy (AEs) research has enhanced our understanding of how anticipated alcohol effects confer risk for heavy drinking and alcohol-related problems. However, extant AE measures have limitations within 1 or more of the following areas: assessing a comprehensive range of effects, specifying the hypothetical number of drinks consumed,…
Indirect Effects of Child Reports of Teacher-Student Relationship on Achievement

PubMed Central

Hughes, Jan N.; Wu, Jiun-Yu; Kwok, Oi-man; Villarreal, Victor; Johnson, Audrea Y.

2012-01-01

The effect of student-reported teacher-student relationship quality (TSRQ) on academic motivation and achievement was investigated among a sample of 690 academically at risk elementary students (52.8% male). Measures of TSRQ, achievement, and motivation were collected annually for 3 consecutive years, beginning when participants were in grade 2 (24.8%) or grade 3 (74.6%). Child-reported conflict was stable across the 3 years, whereas warmth declined. Boys and African American students reported greater conflict than did girls and Caucasian and Hispanic students. Girls and African American students reported higher warmth than boys and non-African American students. Using path analysis, the authors tested the hypothesis that measures of student motivation in Year 2 mediated the effects of conflict and warmth in Year 1 on reading and math achievement in Year 3. Child-perceived conflict predicted cross-year changes in teacher-rated behavioral engagement, which, in turn, predicted cross-year changes in reading and math achievement. Math competence beliefs also mediated the effect of child- perceived warmth on math achievement. Effects controlled for stability of measures across time, the within-wave association between measures, and baseline measures of IQ and economic adversity. Implications of findings for improving the academic achievement of students at-risk for school failure are discussed. PMID:23226873
A Method to Determine the Impact of Patient-Centered Care Interventions in Primary Care

PubMed Central

Daaleman, Timothy P.; Shea, Christopher M.; Halladay, Jacqueline; Reed, David

2014-01-01

INTRODUCTION The implementation of patient-centered care (PCC) innovations continues to be poorly understood. We used the implementation effectiveness framework to pilot a method for measuring the impact of a PCC innovation in primary care practices. METHODS We analyzed data from a prior study that assessed the implementation of an electronic geriatric quality-of-life (QOL) module in 3 primary care practices in central North Carolina in 2011–12. Patients responded to the items and the subsequent patient-provider encounter was coded using the Roter Interaction Analysis System (RIAS) system. We developed an implementation effectiveness measure specific to the QOL module (i.e., frequency of usage during the encounter) using RIAS and then tested if there were differences with RIAS codes using analysis of variance. RESULTS A total of 60 patient-provider encounters examined differences in the uptake of the QOL module (i.e., implementation-effectiveness measure) with the frequency of RIAS codes during the encounter (i.e., patient-centeredness measure). There was a significant association between the effectiveness measure and patient-centered RIAS codes. CONCLUSION The concept of implementation effectiveness provided a useful framework determine the impact of a PCC innovation. PRACTICE IMPLICATIONS A method that captures real-time interactions between patients and care staff over time can meaningfully evaluate PCC innovations. PMID:25269410
Indirect Effects of Child Reports of Teacher-Student Relationship on Achievement.

PubMed

Hughes, Jan N; Wu, Jiun-Yu; Kwok, Oi-Man; Villarreal, Victor; Johnson, Audrea Y

2012-01-01

The effect of student-reported teacher-student relationship quality (TSRQ) on academic motivation and achievement was investigated among a sample of 690 academically at risk elementary students (52.8% male). Measures of TSRQ, achievement, and motivation were collected annually for 3 consecutive years, beginning when participants were in grade 2 (24.8%) or grade 3 (74.6%). Child-reported conflict was stable across the 3 years, whereas warmth declined. Boys and African American students reported greater conflict than did girls and Caucasian and Hispanic students. Girls and African American students reported higher warmth than boys and non-African American students. Using path analysis, the authors tested the hypothesis that measures of student motivation in Year 2 mediated the effects of conflict and warmth in Year 1 on reading and math achievement in Year 3. Child-perceived conflict predicted cross-year changes in teacher-rated behavioral engagement, which, in turn, predicted cross-year changes in reading and math achievement. Math competence beliefs also mediated the effect of child- perceived warmth on math achievement. Effects controlled for stability of measures across time, the within-wave association between measures, and baseline measures of IQ and economic adversity. Implications of findings for improving the academic achievement of students at-risk for school failure are discussed.
Simple, Fast and Effective Correction for Irradiance Spatial Nonuniformity in Measurement of IVs of Large Area Cells at NREL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moriarty, Tom

The NREL cell measurement lab measures the IV parameters of cells of multiple sizes and configurations. A large contributing factor to errors and uncertainty in Jsc, Imax, Pmax and efficiency can be the irradiance spatial nonuniformity. Correcting for this nonuniformity through its precise and frequent measurement can be very time consuming. This paper explains a simple, fast and effective method based on bicubic interpolation for determining and correcting for spatial nonuniformity and verification of the method's efficacy.
[Prevention of circulatory system diseases in underground mining workers].

PubMed

Vlasova, E M; Alexeyev, M B; Shliapnikov, D M; Nosov, A E; Barannikov, V G

2015-01-01

The article covers results of preventive measures in workers engaged into underground mining. Those measures are aimed to prevent occupationally mediated health disorders resulting in circulatory diseases. The prophylaxis was proven effective on premorbid condition--that was demonstrated in reliable decrease of cause-effect relationship intensity for health disorders in workers subjected to prophylactic measures. Transitory disablement morbidity due to cicrulatory system diseases decreased. Situational modelling of risk changes for the studied group demonstrated changes of diseases risk under medical prophylactic measures. After the prophylaxis, the risk demonstrated 3.1 times decrease.
Estimation of Aerosol Direct Radiative Effects from Satellite and In Situ Measurements

NASA Technical Reports Server (NTRS)

Bergstrom, Robert W.; Russell, Philip B.; Schmid, Beat; Redemann, Jens; McIntosh, Dawn

2000-01-01

Ames researchers have combined measurements from satellite, aircraft, and the surface to estimate the effect of airborne particles (aerosols) on the solar radiation over the North Atlantic region. These aerosols (which come from both natural and pollution sources) can reflect solar radiation, causing a cooling effect that opposes the warming caused by carbon dioxide. Recently, increased attention has been paid to aerosol effects to better understand the Earth climate system.
Thinking Scientifically: Understanding Measurement and Errors

ERIC Educational Resources Information Center

Alagumalai, Sivakumar

2015-01-01

Thinking scientifically consists of systematic observation, experiment, measurement, and the testing and modification of research questions. In effect, science is about measurement and the understanding of causation. Measurement is an integral part of science and engineering, and has pertinent implications for the human sciences. No measurement is…
INVESTIGATION OF SYSTEMATIC EFFECTS IN KEPLER DATA: SEASONAL VARIATIONS IN THE LIGHT CURVE OF HAT-P-7b

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Eylen, V.; Lindholm Nielsen, M.; Hinrup, B.

2013-09-10

With years of Kepler data currently available, the measurement of variations in planetary transit depths over time can now be attempted. To do so, it is of primary importance to understand which systematic effects may affect the measurement of transits. We aim to measure the stability of Kepler measurements over years of observations. We present a study of the depth of about 500 transit events of the Hot Jupiter HAT-P-7b, using 14 quarters (Q0-Q13) of data from the Kepler satellite. We find a systematic variation in the depth of the primary transit, related to quarters of data and recurring yearly.more » These seasonal variations are about 1%. Within seasons, we find no evidence for trends. We speculate that the cause of the seasonal variations could be unknown field crowding or instrumental artifacts. Our results show that care must be taken when combining transits throughout different quarters of Kepler data. Measuring the relative planetary radius of HAT-P-7b without taking these systematic effects into account leads to unrealistically low error estimates. This effect could be present in all Kepler targets. If so, relative radius measurements of all Hot Jupiters to a precision much better than 1% are unrealistic.« less
Determination of refractive index, size, and concentration of nonabsorbing colloidal nanoparticles from measurements of the complex effective refractive index.

PubMed

Márquez-Islas, Roberto; Sánchez-Pérez, Celia; García-Valenzuela, Augusto

2014-02-01

We describe a method for obtaining the refractive index (RI), size, and concentration of nonabsorbing nanoparticles in suspension from relatively simple optical measurements. The method requires measuring the complex effective RI of two dilute suspensions of the particles in liquids of different refractive indices. We describe the theoretical basis of the proposed method and provide experimental results validating the procedure.
Effects of lifestyle change interventions for people with intellectual disabilities: Systematic review and meta-analysis of randomized controlled trials.

PubMed

Willems, Mariël; Waninge, Aly; Hilgenkamp, Thessa I M; van Empelen, Pepijn; Krijnen, Wim P; van der Schans, Cees P; Melville, Craig A

2018-05-08

Promotion of a healthy lifestyle for people with intellectual disabilities is important; however, the effectiveness of lifestyle change interventions is unclear. This research will examine the effectiveness of lifestyle change interventions for people with intellectual disabilities. Randomized controlled trials (RCTs) of lifestyle change interventions for people with intellectual disabilities were included in a systematic review and meta-analysis. Data on study and intervention characteristics were extracted, as well as data on outcome measures and results. Internal validity of the selected papers was assessed using the Cochrane Collaboration's risk bias tool. Eight RCTs were included. Multiple outcome measures were used, whereby outcome measures targeting environmental factors and participation were lacking and personal outcome measures were mostly used by a single study. Risks of bias were found for all studies. Meta-analysis showed some effectiveness for lifestyle change interventions, and a statistically significant decrease was found for waist circumference. Some effectiveness was found for lifestyle change interventions for people with intellectual disabilities. However, the effects were only statistically significant for waist circumference, so current lifestyle change interventions may not be optimally tailored to meet the needs of people with intellectual disabilities. © 2018 John Wiley & Sons Ltd.
Effect of Explosion Bulge Test Parameters on the Measurement of Deformation Resistance for Steel

DTIC Science & Technology

2014-02-01

UNCLASSIFIED UNCLASSIFIED Effect of Explosion Bulge Test Parameters on the Measurement of Deformation Resistance for Steel C...Measurement of Deformation Resistance for Steel Executive Summary The Explosion Bulge Test has been used for over 60 years as a standard test for...the assessment of steel toughness and deformation resistance under blast loading conditions [1-3]. However, details of the test conditions vary
Phantom force induced by tunneling current: a characterization on Si(111).

PubMed

Weymouth, A J; Wutscher, T; Welker, J; Hofmann, T; Giessibl, F J

2011-06-03

Simultaneous measurements of tunneling current and atomic forces provide complementary atomic-scale data of the electronic and structural properties of surfaces and adsorbates. With these data, we characterize a strong impact of the tunneling current on the measured force on samples with limited conductivity. The effect is a lowering of the effective gap voltage through sample resistance which in turn lowers the electrostatic attraction, resulting in an apparently repulsive force. This effect is expected to occur on other low-conductance samples, such as adsorbed molecules, and to strongly affect Kelvin probe measurements when tunneling occurs.
Vaccination Programs for Endemic Infections: Modelling Real versus Apparent Impacts of Vaccine and Infection Characteristics

NASA Astrophysics Data System (ADS)

Ragonnet, Romain; Trauer, James M.; Denholm, Justin T.; Geard, Nicholas L.; Hellard, Margaret; McBryde, Emma S.

2015-10-01

Vaccine effect, as measured in clinical trials, may not accurately reflect population-level impact. Furthermore, little is known about how sensitive apparent or real vaccine impacts are to factors such as the risk of re-infection or the mechanism of protection. We present a dynamic compartmental model to simulate vaccination for endemic infections. Several measures of effectiveness are calculated to compare the real and apparent impact of vaccination, and assess the effect of a range of infection and vaccine characteristics on these measures. Although broadly correlated, measures of real and apparent vaccine effectiveness can differ widely. Vaccine impact is markedly underestimated when primary infection provides partial natural immunity, when coverage is high and when post-vaccination infectiousness is reduced. Despite equivalent efficacy, ‘all or nothing’ vaccines are more effective than ‘leaky’ vaccines, particularly in settings with high risk of re-infection and transmissibility. Latent periods result in greater real impacts when risk of re-infection is high, but this effect diminishes if partial natural immunity is assumed. Assessments of population-level vaccine effects against endemic infections from clinical trials may be significantly biased, and vaccine and infection characteristics should be considered when modelling outcomes of vaccination programs, as their impact may be dramatic.
Vaccination Programs for Endemic Infections: Modelling Real versus Apparent Impacts of Vaccine and Infection Characteristics

PubMed Central

Ragonnet, Romain; Trauer, James M.; Denholm, Justin T.; Geard, Nicholas L.; Hellard, Margaret; McBryde, Emma S.

2015-01-01

Vaccine effect, as measured in clinical trials, may not accurately reflect population-level impact. Furthermore, little is known about how sensitive apparent or real vaccine impacts are to factors such as the risk of re-infection or the mechanism of protection. We present a dynamic compartmental model to simulate vaccination for endemic infections. Several measures of effectiveness are calculated to compare the real and apparent impact of vaccination, and assess the effect of a range of infection and vaccine characteristics on these measures. Although broadly correlated, measures of real and apparent vaccine effectiveness can differ widely. Vaccine impact is markedly underestimated when primary infection provides partial natural immunity, when coverage is high and when post-vaccination infectiousness is reduced. Despite equivalent efficacy, ‘all or nothing’ vaccines are more effective than ‘leaky’ vaccines, particularly in settings with high risk of re-infection and transmissibility. Latent periods result in greater real impacts when risk of re-infection is high, but this effect diminishes if partial natural immunity is assumed. Assessments of population-level vaccine effects against endemic infections from clinical trials may be significantly biased, and vaccine and infection characteristics should be considered when modelling outcomes of vaccination programs, as their impact may be dramatic. PMID:26482413
Characterization of Non-Linearized Spacecraft Relative Motion using Nonlinear Normal Modes

DTIC Science & Technology

2016-04-20

10 5.1 Results for Four Models with Different Nonlinearities ..................................................11 5.2 Effects of...Force Research Laboratory or the U.S. Government. 1.0 SUMMARY In this report, the effects of incorporating nonlinearities in sequential relative orbit...exactly. Huxel and Bishop [1] discussed the effects of using both inertial range measurements from tracking stations and relative range measurements

Some links on this page may take you to non-federal websites. Their policies may differ from this site.

Sample records for measures of effectiveness

Abstract