Design and validation of instruments to measure knowledge.

PubMed

Elliott, T E; Regal, R R; Elliott, B A; Renier, C M

2001-01-01

Measuring health care providers' learning after they have participated in educational interventions that use experimental designs requires valid, reliable, and practical instruments. A literature review was conducted. In addition, experience gained from designing and validating instruments for measuring the effect of an educational intervention informed this process. The eight main steps for designing, validating, and testing the reliability of instruments for measuring learning outcomes are presented. The key considerations and rationale for this process are discussed. Methods for critiquing and adapting existent instruments and creating new ones are offered. This study may help other investigators in developing valid, reliable, and practical instruments for measuring the outcomes of educational activities.

DESIGN OF FIELD STUDIES FOR THE MEASUREMENT OF BAFS AND BSAFS.

EPA Science Inventory

Bioaccumulation factors (BAFs) and biota-sediment accumulation factors (BSAFs) for aquatic organisms are necessary parameters for assessing the ecological risks of nonpolar organic chemicals in aquatic ecosystems. In designing a field study to measure BAFs and/or BSAFs, one of th...

Reliability, minimal detectable change and responsiveness to change: Indicators to select the best method to measure sedentary behaviour in older adults in different study designs.

PubMed

Dontje, Manon L; Dall, Philippa M; Skelton, Dawn A; Gill, Jason M R; Chastin, Sebastien F M

2018-01-01

Prolonged sedentary behaviour (SB) is associated with poor health. It is unclear which SB measure is most appropriate for interventions and population surveillance to measure and interpret change in behaviour in older adults. The aims of this study: to examine the relative and absolute reliability, Minimal Detectable Change (MDC) and responsiveness to change of subjective and objective methods of measuring SB in older adults and give recommendations of use for different study designs. SB of 18 older adults (aged 71 (IQR 7) years) was assessed using a systematic set of six subjective tools, derived from the TAxonomy of Self report Sedentary behaviour Tools (TASST), and one objective tool (activPAL3c), over 14 days. Relative reliability (Intra Class Correlation coefficients-ICC), absolute reliability (SEM), MDC, and the relative responsiveness (Cohen's d effect size (ES) and Guyatt's Responsiveness coefficient (GR)) were calculated for each of the different tools and ranked for different study designs. ICC ranged from 0.414 to 0.946, SEM from 36.03 to 137.01 min, MDC from 1.66 to 8.42 hours, ES from 0.017 to 0.259 and GR from 0.024 to 0.485. Objective average day per week measurement ranked as most responsive in a clinical practice setting, whereas a one day measurement ranked highest in quasi-experimental, longitudinal and controlled trial study designs. TV viewing-Previous Week Recall (PWR) ranked as most responsive subjective measure in all study designs. The reliability, Minimal Detectable Change and responsiveness to change of subjective and objective methods of measuring SB is context dependent. Although TV viewing-PWR is the more reliable and responsive subjective method in most situations, it may have limitations as a reliable measure of total SB. Results of this study can be used to guide choice of tools for detecting change in sedentary behaviour in older adults in the contexts of population surveillance, intervention evaluation and individual care.

Investigation of the feasibility of optical diagnostic measurements at the exit of the SSME

NASA Technical Reports Server (NTRS)

Shirley, John A.; Boedeker, Laurence R.

1993-01-01

Under Contract NAS8-36861 sponsored by NASA Marshall Space Flight Center, the United Technologies Research Center is conducting an investigation of the feasibility of remote optical diagnostics to measure temperature, species concentration and velocity at the exit of the Space Shuttle Main Engine (SSME). This is a two phase study consisting of a conceptual design phase followed by a laboratory experimental investigation. The first task of the conceptual design studies is to screen and evaluate the techniques which can be used for the measurements. The second task is to select the most promising technique or techniques, if as expected, more than one type of measurement must be used to measure all the flow variables of interest. The third task is to examine in detail analytically the capabilities and limitations of the selected technique(s). The results of this study are described in the section of this report entitled Conceptual Design Investigations. The conceptual design studies identified spontaneous Raman scattering and photodissociative flow-tagging for measurements respectively of gas temperature and major species concentration and for velocity. These techniques and others that were considered are described in the section describing the conceptual design. The objective of the second phase of investigations was to investigate experimentally the techniques identified in the first phase. The first task of the experimental feasibility study is to design and assemble laboratory scale experimental apparatus to evaluate the best approaches for SSME exit optical diagnostics for temperature, species concentrations and velocity, as selected in the Phase I conceptual design study. The second task is to evaluate performance, investigate limitations, and establish actual diagnostic capabilities, accuracies and precision for the selected optical systems. The third task is to evaluate design requirements and system trade-offs of conceptual instruments. Spontaneous Raman scattering excited by a KrF excimer laser pulse was investigated for SSME exit plane temperature and major species concentration measurements. The relative concentrations of molecular hydrogen and water vapor would be determined by measuring the integrated Q-branch scattering signals through narrow bandpass filters in front of photomultipliers. The temperature would be determined by comparing the signal from a single hydrogen rotational Raman line to the total hydrogen Q-branch signal. The rotational Raman line would be isolated by a monochromator and detected with a PMT.

A Practical Solution to Optimizing the Reliability of Teaching Observation Measures under Budget Constraints

ERIC Educational Resources Information Center

Meyer, J. Patrick; Liu, Xiang; Mashburn, Andrew J.

2014-01-01

Researchers often use generalizability theory to estimate relative error variance and reliability in teaching observation measures. They also use it to plan future studies and design the best possible measurement procedures. However, designing the best possible measurement procedure comes at a cost, and researchers must stay within their budget…

The design and methodology of premature ejaculation interventional studies

PubMed Central

2016-01-01

Large well-designed clinical efficacy and safety randomized clinical trials (RCTs) are required to achieve regulatory approval of new drug treatments. The objective of this article is to make recommendations for the criteria for defining and selecting the clinical trial study population, design and efficacy outcomes measures which comprise ideal premature ejaculation (PE) interventional trial methodology. Data on clinical trial design, epidemiology, definitions, dimensions and psychological impact of PE was reviewed, critiqued and incorporated into a series of recommendations for standardisation of PE clinical trial design, outcome measures and reporting using the principles of evidence based medicine. Data from PE interventional studies are only reliable, interpretable and capable of being generalised to patients with PE, when study populations are defined by the International Society for Sexual Medicine (ISSM) multivariate definition of PE. PE intervention trials should employ a double-blind RCT methodology and include placebo control, active standard drug control, and/or dose comparison trials. Ejaculatory latency time (ELT) and subject/partner outcome measures of control, personal/partner/relationship distress and other study-specific outcome measures should be used as outcome measures. There is currently no published literature which identifies a clinically significant threshold response to intervention. The ISSM definition of PE reflects the contemporary understanding of PE and represents the state-of-the-art multi-dimensional definition of PE and is recommended as the basis of diagnosis of PE for all PE clinical trials. PMID:27652224

Continual Response Measurement: Design and Validation.

ERIC Educational Resources Information Center

Baggaley, Jon

1987-01-01

Discusses reliability and validity of continual response measurement (CRM), a computer-based measurement technique, and its use in social science research. Highlights include the importance of criterion-referencing the data, guidelines for designing studies using CRM, examples typifying their deductive and inductive functions, and a discussion of…

Anthropometry of Brazilian Air Force pilots.

PubMed

da Silva, Gilvan V; Halpern, Manny; Gordon, Claire C

2017-10-01

Anthropometric data are essential for the design of military equipment including sizing of aircraft cockpits and personal gear. Currently, there are no anthropometric databases specific to Brazilian military personnel. The aim of this study was to create a Brazilian anthropometric database of Air Force pilots. The methods, protocols, descriptions, definitions, landmarks, tools and measurements procedures followed the instructions outlined in Measurer's Handbook: US Army and Marine Corps Anthropometric Surveys, 2010-2011 - NATICK/TR-11/017. The participants were measured countrywide, in all five Brazilian Geographical Regions. Thirty-nine anthropometric measurements related to cockpit design were selected. The results of 2133 males and 206 females aged 16-52 years constitute a set of basic data for cockpit design, space arrangement issues and adjustments, protective gear and equipment design, as well as for digital human modelling. Another important implication is that this study can be considered a starting point for reducing gender bias in women's career as pilots. Practitioner Summary: This paper describes the first large-scale anthropometric survey of the Brazilian Air Force pilots and the development of the related database. This study provides critical data for improving aircraft cockpit design for ergonomics and comprehensive pilot accommodation, protective gear and uniform design, as well as digital human modelling.

Progressive addition lenses--measurements and ratings.

PubMed

Sheedy, Jim; Hardy, Raymond F; Hayes, John R

2006-01-01

This study is a followup to a previous study in which the optics of several progressive addition lens (PALs) designs were measured and analyzed. The objective was to provide information about various PAL designs to enable eye care practitioners to select designs based on the particular viewing requirements of the patient. The optical properties of 12 lenses of the same power for each of 23 different PAL designs were measured with a Rotlex Class Plus lens analyzer. Lenses were ordered through optical laboratories and specified to be plano with a +2.00 diopters add. Measurements were normalized to plano at the manufacturer-assigned location for the distance power to eliminate laboratory tolerance errors. The magnitude of unwanted astigmatism and the widths and areas of the distance, intermediate, and near viewing zones were calculated from the measured data according to the same criteria used in a previous study. The optical characteristics of the different PAL designs were significantly different from one another. The differences were significant in terms of the sizes and widths of the viewing zones, the amount of unwanted astigmatism, and the minimum fitting height. Ratings of the distance, intermediate, and near viewing areas were calculated for each PAL design based on the widths and sizes of those zones. Ratings for unwanted astigmatism and recommended minimum fitting heights were also determined. Ratings based on combinations of viewing zone ratings are also reported. The ratings are intended to be used to select a PAL design that matches the particular visual needs of the patient and to evaluate the success and performance of currently worn PALs. Reasoning and task analyses suggest that these differences can be used to select a PAL design to meet the individual visual needs of the patient; clinical trials studies are required to test this hypothesis.

Measurement and Design Issues in the Study of Adolescent Sexual Behavior and the Evaluation of Adolescent Sexual Health Behavior Interventions

ERIC Educational Resources Information Center

Young, Michael; Palacios, Rebecca; Penhollow, Tina M.

2012-01-01

To improve the quality of research and commentary concerning adolescent sexuality and evaluation of both comprehensive sexuality education and abstinence education programs, this article aims to help readers (1) select appropriate measures to study adolescent sexual behavior, (2) develop appropriate study designs to evaluate adolescent sexual…

Measures of outdoor play and independent mobility in children and youth: A methodological review.

PubMed

Bates, Bree; Stone, Michelle R

2015-09-01

Declines in children's outdoor play have been documented globally, which are partly due to heightened restrictions around children's independent mobility. Literature on outdoor play and children's independent mobility is increasing, yet no paper has summarized the various methodological approaches used. A methodological review could highlight most commonly used measures and comprehensive research designs that could result in more standardized methodological approaches. Methodological review. A standardized protocol guided a methodological review of published research on measures of outdoor play and children's independent mobility in children and youth (0-18 years). Online searches of 8 electronic databases were conducted and studies included if they contained a subjective/objective measure of outdoor play or children's independent mobility. References of included articles were scanned to identify additional articles. Twenty-four studies were included on outdoor play, and twenty-three on children's independent mobility. Study designs were diverse. Common objective measures included accelerometry, global positioning systems and direct observation; questionnaires, surveys and interviews were common subjective measures. Focus groups, activity logs, monitoring sheets, travel/activity diaries, behavioral maps and guided tours were also utilized. Questionnaires were used most frequently, yet few studies used the same questionnaire. Five studies employed comprehensive, mixed-methods designs. Outdoor play and children's independent mobility have been measured using a wide variety of techniques, with only a few studies using similar methodologies. A standardized methodological approach does not exist. Future researchers should consider including both objective measures (accelerometry and global positioning systems) and subjective measures (questionnaires, activity logs, interviews), as more comprehensive designs will enhance understanding of each multidimensional construct. Creating a standardized methodological approach would improve study comparisons. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Sample and design considerations in post-disaster mental health needs assessment tracking surveys

PubMed Central

Kessler, Ronald C.; Keane, Terence M.; Ursano, Robert J.; Mokdad, Ali; Zaslavsky, Alan M.

2009-01-01

Although needs assessment surveys are carried out after many large natural and man-made disasters, synthesis of findings across these surveys and disaster situations about patterns and correlates of need is hampered by inconsistencies in study designs and measures. Recognizing this problem, the US Substance Abuse and Mental Health Services Administration (SAMHSA) assembled a task force in 2004 to develop a model study design and interview schedule for use in post-disaster needs assessment surveys. The US National Institute of Mental Health subsequently approved a plan to establish a center to implement post-disaster mental health needs assessment surveys in the future using an integrated series of measures and designs of the sort proposed by the SAMHSA task force. A wide range of measurement, design, and analysis issues will arise in developing this center. Given that the least widely discussed of these issues concerns study design, the current report focuses on the most important sampling and design issues proposed for this center based on our experiences with the SAMHSA task force, subsequent Katrina surveys, and earlier work in other disaster situations. PMID:19035440

Testing Multiple Outcomes in Repeated Measures Designs

ERIC Educational Resources Information Center

Lix, Lisa M.; Sajobi, Tolulope

2010-01-01

This study investigates procedures for controlling the familywise error rate (FWR) when testing hypotheses about multiple, correlated outcome variables in repeated measures (RM) designs. A content analysis of RM research articles published in 4 psychology journals revealed that 3 quarters of studies tested hypotheses about 2 or more outcome…

ALTERNATIVE EXPOSURE MEASUREMENT DESIGNS TO IMPROVE EPIDEMIOLOGICAL STUDY DESIGNS: DETERMINANTS OF TEMPORAL VARIABILITY IN ENVIRONMENTAL CONCENTRATIONS, EXPOSURES, AND BIOMARKERS

EPA Science Inventory

The National Human Exposure Assessment Survey in Maryland (NHEXAS-MD) was a longitudinal study of multimedia exposure to metals, pesticides, and polycyclic aromatic compounds (PAHs). Measurements were made and questionnaires were concurrently administered to identify sources o...

The nature and outcomes of work: a replication and extension of interdisciplinary work-design research.

PubMed

Edwards, J R; Scully, J A; Brtek, M D

2000-12-01

Research into the changing nature of work requires comprehensive models of work design. One such model is the interdisciplinary framework (M. A. Campion, 1988), which integrates 4 work-design approaches (motivational, mechanistic, biological, perceptual-motor) and links each approach to specific outcomes. Unfortunately, studies of this framework have used methods that disregard measurement error, overlook dimensions within each work-design approach, and treat each approach and outcome separately. This study reanalyzes data from M. A. Campion (1988), using structural equation models that incorporate measurement error, specify multiple dimensions for each work-design approach, and examine the work-design approaches and outcomes jointly. Results show that previous studies underestimate relationships between work-design approaches and outcomes and that dimensions within each approach exhibit relationships with outcomes that differ in magnitude and direction.

Fundamentals of Sports Analytics.

PubMed

Wasserman, Erin B; Herzog, Mackenzie M; Collins, Christy L; Morris, Sarah N; Marshall, Stephen W

2018-07-01

Recently, the importance of statistics and analytics in sports has increased. This review describes measures of sports injury and fundamentals of sports injury research with a brief overview of some of the emerging measures of sports performance. We describe research study designs that can be used to identify risk factors for injury, injury surveillance programs, and common measures of injury risk and association. Finally, we describe measures of physical performance and training and considerations for using these measures. This review provides sports medicine clinicians with an understanding of current research measures and considerations for designing sports injury research studies. Copyright © 2018 Elsevier Inc. All rights reserved.

Effects of borehole design on complex electrical resistivity measurements: laboratory validation and numerical experiments

NASA Astrophysics Data System (ADS)

Treichel, A.; Huisman, J. A.; Zhao, Y.; Zimmermann, E.; Esser, O.; Kemna, A.; Vereecken, H.

2012-12-01

Geophysical measurements within a borehole are typically affected by the presence of the borehole. The focus of the current study is to quantify the effect of borehole design on broadband electrical impedance tomography (EIT) measurements within boreholes. Previous studies have shown that effects on the real part of the electrical resistivity are largest for boreholes with large diameters and for materials with a large formation factor. However, these studies have not considered the effect of the well casing and the filter gravel on the measurement of the real part of the electrical resistivity. In addition, the effect of borehole design on the imaginary part of the electrical resistivity has not been investigated yet. Therefore, the aim of this study is to investigate the effect of borehole design on the complex electrical resistivity using laboratory measurements and numerical simulations. In order to do so, we developed a high resolution two dimensional axisymmetric finite element model (FE) that enables us to simulate the effects of several key borehole design parameters (e.g. borehole diameter, thickness of PVC well casing) on the measurement process. For the material surrounding the borehole, realistic values for complex resistivity were obtained from a database of laboratory measurements of complex resistivity from the test site Krauthausen (Germany). The slotted PVC well casing is represented by an effective resistivity calculated from the water-filled slot volume and the PVC volume. Measurements with and without PVC well casing were made with a four-electrode EIT logging tool in a water-filled rain barrel. The initial comparison for the case that the logging tool was inserted in the PVC well casing showed a considerable mismatch between measured and modeled values. It was required to consider a complete electrode model instead of point electrodes to remove this mismatch. This validated model was used to investigate in detail how complex resistivity measurements with different electrode configurations are affected by borehole design. Finally, the plausibility of our results was verified by comparing the simulation results with borehole EIT measurements made at the test site Krauthausen.

Precision of Curriculum-Based Measurement Reading Data: Considerations for Multiple-Baseline Designs

ERIC Educational Resources Information Center

Klingbeil, David A.; Van Norman, Ethan R.; Nelson, Peter M.

2017-01-01

Single-case designs provide an established technology for evaluating the effects of academic interventions. Researchers interested in studying the long-term effects of reading interventions often use curriculum-based measures of reading (CBM-R) as they possess many of the desirable characteristics for use in a time-series design. The reliability…

Robustness of crossover trials against subject drop-out - Examples of perpetually connected designs.

PubMed

Godolphin, P J; Godolphin, E J

2017-01-01

When performing a repeated measures experiment, such as a clinical trial, there is a risk of subject drop-out during the experiment. If one or more subjects leave the study prematurely, a situation could arise where the eventual design is disconnected, implying that very few treatment contrasts for both direct effects and carryover effects are estimable. This paper aims to identify experimental conditions where this problem with the eventual design can be avoided. It is shown that in the class of uniformly balanced repeated measurement designs consisting of two or more Latin squares, there are planned designs with the following useful property. Provided that all subjects have completed the first two periods of study, such a design will not be replaced by a disconnected eventual design due to drop-out, irrespective of the type of drop-out behaviour that may occur. Designs with this property are referred to as perpetually connected. These experimental conditions are identified and examined in the paper and an example of at least one perpetually connected uniformly balanced repeated measurement design is given in each case. The results improve upon previous contributions in the literature that have been confined largely to cases in which drop-out occurs only in the final periods of study.

Parent-Reported Social Support for Child's Fruit and Vegetable Intake: Validity of Measures

ERIC Educational Resources Information Center

Dave, Jayna M.; Evans, Alexandra E.; Condrasky, Marge D.; Williams, Joel E.

2012-01-01

Objective: To develop and validate measures of parental social support to increase their child's fruit and vegetable (FV) consumption. Design: Cross-sectional study design. Setting: School and home. Participants: Two hundred three parents with at least 1 elementary school-aged child. Main Outcome Measure: Parents completed a questionnaire that…

Measures of the food environment: A systematic review of the field, 2007-2015.

PubMed

Lytle, Leslie A; Sokol, Rebeccah L

2017-03-01

Many studies have examined the relationship between the food environment and health-related outcomes, but fewer consider the integrity of measures used to assess the food environment. The present review builds on and makes comparisons with a previous review examining food environment measures and expands the previous review to include a more in depth examination of reliability and validity of measures and study designs employed. We conducted a systematic review of studies measuring the food environment published between 2007 and 2015. We identified these articles through: PubMed, Embase, Web of Science, PsycINFO, and Global Health databases; tables of contents of relevant journals; and the National Cancer Institute's Measures of the Food Environment website. This search yielded 11,928 citations. We retained and abstracted data from 432 studies. The most common methodology used to study the food environment was geographic analysis (65% of articles) and the domination of this methodology has persisted since the last review. Only 25.9% of studies in this review reported the reliability of measures and 28.2% reported validity, but this was an improvement as compared to the earlier review. Very few of the studies reported construct validity. Studies reporting measures of the school or worksite environment have decreased since the previous review. Only 13.9% of the studies used a longitudinal design. To strengthen research examining the relationship between the food environment and population health, there is a need for robust and psychometrically-sound measures and more sophisticated study designs. Copyright © 2017 Elsevier Ltd. All rights reserved.

The effects of incubation temperature and experimental design on heart rates of lizard embryos.

PubMed

Hulbert, Austin C; Mitchell, Timothy S; Hall, Joshua M; Guiffre, Cassia M; Douglas, Danielle C; Warner, Daniel A

2017-08-01

Many studies of phenotypic plasticity alter environmental conditions during embryonic development, yet only measure phenotypes at the neonatal stage (after embryonic development). However, measuring aspects of embryo physiology enhances our understanding of how environmental factors immediately affect embryos, which aids our understanding of developmental plasticity. While current research on reptile developmental plasticity has demonstrated that fluctuating incubation temperatures affect development differently than constant temperatures, most research on embryo physiology is still performed with constant temperature experiments. In this study, we noninvasively measured embryonic heart rates of the brown anole (Anolis sagrei), across ecologically relevant fluctuating temperatures. We incubated eggs under temperatures measured from potential nests in the field and examined how heart rates change through a diel cycle and throughout embryonic development. We also evaluated how experimental design (e.g., repeated vs. single measures designs, constant vs. fluctuating temperatures) and different protocols (e.g., removing eggs from incubators) might influence heart rate. We found that heart rates were correlated with daily temperature and increased through development. Our findings suggest that experimenters have reasonable flexibility in choosing an experimental design to address their questions; however, some aspects of design and protocol can potentially influence estimations of heart rates. Overall, we present the first ecologically relevant measures of anole embryonic heart rates and provide recommendations for experimental designs for future experiments. © 2017 Wiley Periodicals, Inc.

Research design considerations for single-dose analgesic clinical trials in acute pain: IMMPACT recommendations.

PubMed

Cooper, Stephen A; Desjardins, Paul J; Turk, Dennis C; Dworkin, Robert H; Katz, Nathaniel P; Kehlet, Henrik; Ballantyne, Jane C; Burke, Laurie B; Carragee, Eugene; Cowan, Penney; Croll, Scott; Dionne, Raymond A; Farrar, John T; Gilron, Ian; Gordon, Debra B; Iyengar, Smriti; Jay, Gary W; Kalso, Eija A; Kerns, Robert D; McDermott, Michael P; Raja, Srinivasa N; Rappaport, Bob A; Rauschkolb, Christine; Royal, Mike A; Segerdahl, Märta; Stauffer, Joseph W; Todd, Knox H; Vanhove, Geertrui F; Wallace, Mark S; West, Christine; White, Richard E; Wu, Christopher

2016-02-01

This article summarizes the results of a meeting convened by the Initiative on Methods, Measurement, and Pain Assessment in Clinical Trials (IMMPACT) on key considerations and best practices governing the design of acute pain clinical trials. We discuss the role of early phase clinical trials, including pharmacokinetic-pharmacodynamic (PK-PD) trials, and the value of including both placebo and active standards of comparison in acute pain trials. This article focuses on single-dose and short-duration trials with emphasis on the perioperative and study design factors that influence assay sensitivity. Recommendations are presented on assessment measures, study designs, and operational factors. Although most of the methodological advances have come from studies of postoperative pain after dental impaction, bunionectomy, and other surgeries, the design considerations discussed are applicable to many other acute pain studies conducted in different settings.

Influence of Study Design on Outcomes Following Reflexology Massage: An Integrative and Critical Review of Interventional Studies.

PubMed

McVicar, Andrew; Greenwood, Christina; Ellis, Carol; LeForis, Chantelle

2016-09-01

Interpretation of the efficacy of reflexology is hindered by inconsistent research designs and complicated by professional views that criteria of randomized controlled trials (RCTs)are not ideal to research holistic complementary and alternative medicine practice. The influence of research designs on study outcomes is not known. This integrative review sought to evaluate this possibility. Thirty-seven interventional studies (2000-2014) were identified; they had RCT or non-RCT design and compared reflexology outcomes against a control/comparison group. Viability of integrating RCT and non-RCT studies into a single database was first evaluated by appraisal of 16 reporting fields related to study setting and objectives, sample demographics, methodologic design, and treatment fidelity and assessment against Jadad score quality criteria for RCTs. For appraisal, the database was stratified into RCT/non-RCT or Jadad score of 3 or more or less than 3. Deficits in reporting were identified for blind assignment of participants, dropout/completion rate, and School of Reflexology. For comparison purposes, these fields were excluded from subsequent analysis for evidence of association between design fields and of fields with study outcomes. Thirty-one studies applied psychometric tools and 20 applied biometric tools (14 applied both). A total of 116 measures were used. Type of measure was associated with study objectives (p < 0.001; chi-square), in particular of psychometric measures with a collated "behavioral/cognitive" objective. Significant outcomes were more likely (p < 0.001; chi-square) for psychometric than for biometric measures. Neither type of outcome was associated with choice of RCT or non-RCT method, but psychometric responses were associated (p = 0.007) with a nonmassage control strategy. The review supports psychometric responses to reflexology when study design uses a nonmassage control strategy. Findings suggest that an evaluation of outcomes against sham reflexology massage and other forms of massage, as well as a narrower focus of study objective, may clarify whether there is a relationship between study design and efficacy of reflexology.

Designing Home-Based Telemedicine Systems for the Geriatric Population: An Empirical Study.

PubMed

Narasimha, Shraddhaa; Agnisarman, Sruthy; Chalil Madathil, Kapil; Gramopadhye, Anand; McElligott, James T

2018-02-01

Background and Introduction: Telemedicine, the process of providing healthcare remotely using communication devices, has the potential to be useful for the geriatric population when specifically designed for this age group. This study explored the design of four video telemedicine systems currently available and outlined issues with these systems that impact usability among the geriatric population. Based on the results, design suggestions were developed to improve telemedicine systems for this population. Using a between-subjects experimental design, the study considered four telemedicine systems used in Medical University of South Carolina. The study was conducted at a local retirement home. The participant pool consisted of 40 adults, 60 years or older. The dependent measures used were the mean times for telemedicine session initiation and video session, mean number of errors, post-test satisfaction ratings, the NASA-Task Load Index (NASA-TLX) workload measures, and the IBM-Computer Systems Usability Questionnaire measures. Statistical significance was found among the telemedicine systems' initiation times. The analysis of the qualitative data revealed several issues, including lengthy e-mail content, icon placement, and chat box design, which affect the usability of these systems for the geriatric population. Human factor-based design modifications, including short, precise e-mail content, appropriately placed icons, and the inclusion of instructions, are recommended to address the issues found in the qualitative study.

A Study of the Radiant Ignition of a Range of Pyrotechnic Materials Using a CO2 Laser

DTIC Science & Technology

1990-08-01

of colored smoke compositions. The experimental data serves as a us,/.I probe into ignition mechanisms, and may prove of value in the design of...Therefore, it is measured directly from the oscilloscope recording and is designated ti. Secondly, time to Ignition may be measured using the Go/No-Go or...calculated. This is designated tiG. Both approaches were examined in this study. However, because of the large number of tests required for the Go/No-Go

The impact of response measurement error on the analysis of designed experiments

DOE PAGES

Anderson-Cook, Christine Michaela; Hamada, Michael Scott; Burr, Thomas Lee

2016-11-01

This study considers the analysis of designed experiments when there is measurement error in the true response or so-called response measurement error. We consider both additive and multiplicative response measurement errors. Through a simulation study, we investigate the impact of ignoring the response measurement error in the analysis, that is, by using a standard analysis based on t-tests. In addition, we examine the role of repeat measurements in improving the quality of estimation and prediction in the presence of response measurement error. We also study a Bayesian approach that accounts for the response measurement error directly through the specification ofmore » the model, and allows including additional information about variability in the analysis. We consider the impact on power, prediction, and optimization. Copyright © 2015 John Wiley & Sons, Ltd.« less

The impact of response measurement error on the analysis of designed experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson-Cook, Christine Michaela; Hamada, Michael Scott; Burr, Thomas Lee

This study considers the analysis of designed experiments when there is measurement error in the true response or so-called response measurement error. We consider both additive and multiplicative response measurement errors. Through a simulation study, we investigate the impact of ignoring the response measurement error in the analysis, that is, by using a standard analysis based on t-tests. In addition, we examine the role of repeat measurements in improving the quality of estimation and prediction in the presence of response measurement error. We also study a Bayesian approach that accounts for the response measurement error directly through the specification ofmore » the model, and allows including additional information about variability in the analysis. We consider the impact on power, prediction, and optimization. Copyright © 2015 John Wiley & Sons, Ltd.« less

[Clinical research=design*measurements*statistical analyses].

PubMed

Furukawa, Toshiaki

2012-06-01

A clinical study must address true endpoints that matter for the patients and the doctors. A good clinical study starts with a good clinical question. Formulating a clinical question in the form of PECO can sharpen one's original question. In order to perform a good clinical study one must have a knowledge of study design, measurements and statistical analyses: The first is taught by epidemiology, the second by psychometrics and the third by biostatistics.

Comparative laser Doppler measurement on tooth pulp blood flow at 632 and 750 nm

NASA Astrophysics Data System (ADS)

Oberg, P. Ake; Pettersson, Hans; Rohman, Hakan

1993-12-01

Laser-Doppler flowmetry has been used for the assessment of pulp blood flow in health and disease. General purpose laser Doppler instruments working at the Helium-Neon (632,8 nm) as well as IR (750 - 810 nm) wavelengths have been used in this application. Specially designed handheld equipment has also been used to assess blood supply to the tooth. A considerable difference in the measurement results have been noticed when using different wavelengths and probe designs. In this study some of the problems related to the use of various wavelengths and probe designs are studied in human teeth and in a physical model of a tooth. Our results support the early observation that measurements at different wavelengths and with different probe designs cannot be directly compared.

Implementation of tuberculosis infection control measures in designated hospitals in Zhejiang Province, China: are we doing enough to prevent nosocomial tuberculosis infections?

PubMed Central

Chen, Bin; Liu, Min; Gu, Hua; Wang, Xiaomeng; Qiu, Wei; Shen, Jian; Jiang, Jianmin

2016-01-01

Objectives Tuberculosis (TB) infection control measures are very important to prevent nosocomial transmission and protect healthcare workers (HCWs) in hospitals. The TB infection control situation in TB treatment institutions in southeastern China has not been studied previously. Therefore, the aim of this study was to investigate the implementation of TB infection control measures in TB-designated hospitals in Zhejiang Province, China. Design Cross-sectional survey using observation and interviews. Setting All TB-designated hospitals (n=88) in Zhejiang Province, China in 2014. Primary and secondary outcome measures Managerial, administrative, environmental and personal infection control measures were assessed using descriptive analyses and univariate logistic regression analysis. Results The TB-designated hospitals treated a median of 3030 outpatients (IQR 764–7094) and 279 patients with confirmed TB (IQR 154–459) annually, and 160 patients with TB (IQR 79–426) were hospitalised in the TB wards. Most infection control measures were performed by the TB-designated hospitals. Measures including regular monitoring of TB infection control in high-risk areas (49%), shortening the wait times (42%), and providing a separate waiting area for patients with suspected TB (46%) were sometimes neglected. N95 respirators were available in 85 (97%) hospitals, although only 44 (50%) hospitals checked that they fit. Hospitals with more TB staff and higher admission rates of patients with TB were more likely to set a dedicated sputum collection area and to conduct annual respirator fit testing. Conclusions TB infection control measures were generally implemented by the TB-designated hospitals. Measures including separation of suspected patients, regular monitoring of infection control practices, and regular fit testing of respirators should be strengthened. Infection measures for sputum collection and respirator fit testing should be improved in hospitals with lower admission rates of patients with TB. PMID:26940111

[Design, use and introduction of the practice of measureable complexes for psychophysiological studies].

PubMed

Bokser, O Ia; Gurtovoĭ, E S

1997-01-01

The paper outlines a background of chronoreaction measurement, an important trend of psychophysiological studies. It mainly deals with the chronoreaction measuring methods and tools introduced into production.

Preliminary design study of a high resolution meteor radar

NASA Technical Reports Server (NTRS)

Lee, W.; Geller, M. A.

1973-01-01

A design study for a high resolution meteor radar system is carried out with the objective of measuring upper atmospheric winds and particularly studying short period atmospheric waves in the 80 to 120 km altitude region. The transmitter that is to be used emits a peak power of 4 Mw. The system is designed to measure the wind velocity and height of a meteor trail very accurately. This is achieved using a specially developed digital reduction procedure to determine wind velocity and range together with an interferometer for measuring both the azimuth and elevation angles of the region with a long baseline vernier measurement being used to refine the elevation angle measurement. The resultant accuracies are calculated to be + or - 0.9 m/s for the wind, + or - 230 m for the range and + or - 0.12 deg for the elevation angle, giving a height accuracy of + or - 375 m. The prospects for further development of this system are also discussed.

Design and Testing of an Assessment Instrument to Measure Understanding of Protein Structure and Enzyme Inhibition in a New Context

ERIC Educational Resources Information Center

Villafañe, Sachel M.; Heyen, Bruce J.; Lewis, Jennifer E.; Loertscher, Jennifer; Minderhout, Vicky; Murray, Tracey Arnold

2016-01-01

Assessment instruments designed to measure student conceptual understanding and skills proficiency related to biochemistry are important to transform undergraduate biochemistry education. The purpose of this study was to develop an assessment instrument to measure student understanding of protein structure and enzyme inhibition in a new context,…

Valerian

MedlinePlus

... the likelihood of bias inherent in the study design [ 12 ]. Although all nine trials had flaws, three ... withdrawal . The first study used a repeated-measures design; 128 volunteers were given 400 mg of an ...

Improving Vignette Descriptions and Question Formats to Measure Distance Vision: Evidence from Cognitive Interviews among Students in China

ERIC Educational Resources Information Center

Su, Yanfang; Willis, Gordon; Salomon, Joshua A.

2017-01-01

Vignette design has been largely neglected in anchoring vignette studies. This study aimed to contribute to the science of vignette design by developing and evaluating vignettes for measuring vision in rural China. Cognitive interviews were conducted among 36 participants in a Chinese middle school. The respondents either directly evaluated vision…

Development of an Instrument for the Measurement of Leadership Commitment to Organizational Process

ERIC Educational Resources Information Center

Hylton, Peter D.

2013-01-01

The purpose of this research study was to create a new instrument designed to examine the commitment of an organization's leadership to following organizational processes, as measured by stakeholder perceptions. This instrument was designed to aid in closure of a gap in the field of leadership studies relative to the impact that a leader's…

Invited Commentary: Beware the Test-Negative Design.

PubMed

Westreich, Daniel; Hudgens, Michael G

2016-09-01

In this issue of the Journal, Sullivan et al. (Am J Epidemiol. 2016;184(5):345-353) carefully examine the theoretical justification for use of the test-negative design, a common observational study design, in assessing the effectiveness of influenza vaccination. Using modern causal inference methods (in particular, directed acyclic graphs), they describe different threats to the validity of inferences drawn about the effect of vaccination from test-negative design studies. These threats include confounding, selection bias, and measurement error in either the exposure or the outcome. While confounding and measurement error are common in observational studies, the potential for selection bias inherent in the test-negative design brings into question the validity of inferences drawn from such studies. © The Author 2016. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Radar cross section studies/compact range research

NASA Technical Reports Server (NTRS)

Burnside, W. D.; Dominek, A. K.; Gupta, I. J.; Newman, E. H.; Pathak, P. H.; Peters, L., Jr.

1989-01-01

Achievements in advancing the state-of-the-art in the measurement, control, and analysis of electromagnetic scattering from general aerodynamic targets are summarized. The major topics associated with this study include: (1) electromagnetic scattering analysis; (2) indoor scattering measurement systems; (3) RCS control; (4) waveform processing techniques; (5) material scattering and design studies; (6) design and evaluation of standard targets; and (7) antenna studies. Progress in each of these areas is reported and related publications are listed.

Long-duration heat load measurement approach by novel apparatus design and highly efficient algorithm

NASA Astrophysics Data System (ADS)

Zhu, Yanwei; Yi, Fajun; Meng, Songhe; Zhuo, Lijun; Pan, Weizhen

2017-11-01

Improving the surface heat load measurement technique for vehicles in aerodynamic heating environments is imperative, regarding aspects of both the apparatus design and identification efficiency. A simple novel apparatus is designed for heat load identification, taking into account the lessons learned from several aerodynamic heating measurement devices. An inverse finite difference scheme (invFDM) for the apparatus is studied to identify its surface heat flux from the interior temperature measurements with high efficiency. A weighted piecewise regression filter is also proposed for temperature measurement prefiltering. Preliminary verification of the invFDM scheme and the filter is accomplished via numerical simulation experiments. Three specific pieces of apparatus have been concretely designed and fabricated using different sensing materials. The aerodynamic heating process is simulated by an inductively coupled plasma wind tunnel facility. The identification of surface temperature and heat flux from the temperature measurements is performed by invFDM. The results validate the high efficiency, reliability and feasibility of heat load measurements with different heat flux levels utilizing the designed apparatus and proposed method.

Challenges in designing, conducting, and reporting oral health behavioral intervention studies in primary school age children: methodological issues

PubMed Central

Cooper, Anna Mary; Coffey, Margaret; Dugdill, Lindsey

2014-01-01

Often within oral health, clinical outcome measures dominate trial design rather than behavioral outcome measures, and often there is a reliance on proxy self-reporting of children’s behavior with no corroboration through triangulation of measures. The complexity of the interventions involved in oral health intervention is often overlooked in trial design, and more flexible pragmatic designs that take account of the research context may be more appropriate. Some of the limitations in oral health behavioral intervention studies (trials) in primary school age children were reported in a recently published Cochrane review. This paper aims to critically discuss the findings of a recent Cochrane review in terms of the methodological implications that arise for future design, development, measurement, and reporting of oral health trials in primary school age children. Key components of the UK Medical Research Council’s framework for the design and evaluation of complex interventions are discussed in relation to using taxonomies of behavior change. This paper is not designed to be a definitive guide but aims to bring learning from other areas of public health and health promotion into dental public health. Ultimately, the aim is to aid the design of more successful interventions that produce long-term behavioral changes in children in relation to toothbrushing and nighttime sugar snacking. PMID:27774028

Experimental procedure for measuring and comparing head-neck-trunk posture and movements caused by different progressive addition lens designs.

PubMed

Mateo, B; Porcar-Seder, R; Solaz, J S; Dürsteler, J C

2010-07-01

This study demonstrates that appropriate measurement procedures can detect differences in head movement in a near reading task when using three different progressive addition lenses (PALs). The movements were measured using an anatomical reference system with a biomechanical rationale. This reference system was capable of representing rotations for comparing head flexion relative to trunk, head flexion relative to neck, head rotation relative to trunk and trunk flexion. The subject sample comprised 31 volunteers and three PAL designs with different viewing zones were selected. Significant differences were found between the lenses for three of the seven movement parameters examined. The differences occurred for both vertical and horizontal head movements and could be attributed to aspects of the PAL design. The measurement of the complete kinematic trunk-neck-head chain improved the number of differences that were found over those in previous studies. STATEMENT OF RELEVANCE: The study proposes a methodology based on a biomechanical rationale able to differentiate head-neck-trunk posture and movements caused by different progressive addition lens designs with minimum invasiveness. This methodology could also be applied to analyse the ergonomics of other devices that restrict the user's field of view, such as helmets, personal protective equipment or helmet-mounted displays for pilots. This analysis will allow designers to optimise designs offering higher comfort and performance.

Comparing Dynamic Treatment Regimes Using Repeated-Measures Outcomes: Modeling Considerations in SMART Studies

PubMed Central

Lu, Xi; Nahum-Shani, Inbal; Kasari, Connie; Lynch, Kevin G.; Oslin, David W.; Pelham, William E.; Fabiano, Gregory; Almirall, Daniel

2016-01-01

A dynamic treatment regime (DTR) is a sequence of decision rules, each of which recommends a treatment based on a patient’s past and current health status. Sequential, multiple assignment, randomized trials (SMARTs) are multi-stage trial designs that yield data specifically for building effective DTRs. Modeling the marginal mean trajectories of a repeated-measures outcome arising from a SMART presents challenges, because traditional longitudinal models used for randomized clinical trials do not take into account the unique design features of SMART. We discuss modeling considerations for various forms of SMART designs, emphasizing the importance of considering the timing of repeated measures in relation to the treatment stages in a SMART. For illustration, we use data from three SMART case studies with increasing level of complexity, in autism, child attention deficit hyperactivity disorder (ADHD), and adult alcoholism. In all three SMARTs we illustrate how to accommodate the design features along with the timing of the repeated measures when comparing DTRs based on mean trajectories of the repeated-measures outcome. PMID:26638988

Comparing dynamic treatment regimes using repeated-measures outcomes: modeling considerations in SMART studies.

PubMed

Lu, Xi; Nahum-Shani, Inbal; Kasari, Connie; Lynch, Kevin G; Oslin, David W; Pelham, William E; Fabiano, Gregory; Almirall, Daniel

2016-05-10

A dynamic treatment regime (DTR) is a sequence of decision rules, each of which recommends a treatment based on a patient's past and current health status. Sequential, multiple assignment, randomized trials (SMARTs) are multi-stage trial designs that yield data specifically for building effective DTRs. Modeling the marginal mean trajectories of a repeated-measures outcome arising from a SMART presents challenges, because traditional longitudinal models used for randomized clinical trials do not take into account the unique design features of SMART. We discuss modeling considerations for various forms of SMART designs, emphasizing the importance of considering the timing of repeated measures in relation to the treatment stages in a SMART. For illustration, we use data from three SMART case studies with increasing level of complexity, in autism, child attention deficit hyperactivity disorder, and adult alcoholism. In all three SMARTs, we illustrate how to accommodate the design features along with the timing of the repeated measures when comparing DTRs based on mean trajectories of the repeated-measures outcome. Copyright © 2015 John Wiley & Sons, Ltd.

Age 60 Study. Part 1. Bibliographic Database

DTIC Science & Technology

1994-10-01

seven of these aircraft types participated in a spectacle design study. Experimental spectacles were designed for each pilot and evaluated for...observation flight administered by observers who were uninformed of the details of the experimental design . Students and instructors also completed a critique...intraindividual lability in field-dependence-field independence, and (4) various measurement, sampling, and experimental design concerns associated

Made to Measure: Designs Tailored to Your Study Needs.

PubMed

Jupiter, Daniel C

2015-01-01

What is the best study design? Why would we prefer one to another? With many different designs, what should we be looking for in our critical reading of the literature? We discuss a variety of designs, and their appropriate use. Copyright © 2015 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Application of Regression-Discontinuity Analysis in Pharmaceutical Health Services Research

PubMed Central

Zuckerman, Ilene H; Lee, Euni; Wutoh, Anthony K; Xue, Zhenyi; Stuart, Bruce

2006-01-01

Objective To demonstrate how a relatively underused design, regression-discontinuity (RD), can provide robust estimates of intervention effects when stronger designs are impossible to implement. Data Sources/Study Setting Administrative claims from a Mid-Atlantic state Medicaid program were used to evaluate the effectiveness of an educational drug utilization review intervention. Study Design Quasi-experimental design. Data Collection/Extraction Methods A drug utilization review study was conducted to evaluate a letter intervention to physicians treating Medicaid children with potentially excessive use of short-acting β2-agonist inhalers (SAB). The outcome measure is change in seasonally-adjusted SAB use 5 months pre- and postintervention. To determine if the intervention reduced monthly SAB utilization, results from an RD analysis are compared to findings from a pretest–posttest design using repeated-measure ANOVA. Principal Findings Both analyses indicated that the intervention significantly reduced SAB use among the high users. Average monthly SAB use declined by 0.9 canisters per month (p<.001) according to the repeated-measure ANOVA and by 0.2 canisters per month (p<.001) from RD analysis. Conclusions Regression-discontinuity design is a useful quasi-experimental methodology that has significant advantages in internal validity compared to other pre–post designs when assessing interventions in which subjects' assignment is based on cutoff scores for a critical variable. PMID:16584464

Contextualizing and assessing the social capital of seniors in congregate housing residences: study design and methods

PubMed Central

Moore, Spencer; Shiell, Alan; Haines, Valerie; Riley, Therese; Collier, Carrie

2005-01-01

Background This article discusses the study design and methods used to contextualize and assess the social capital of seniors living in congregate housing residences in Calgary, Alberta. The project is being funded as a pilot project under the Institute of Aging, Canadian Institutes for Health Research. Design/Methods Working with seniors living in 5 congregate housing residencies in Calgary, the project uses a mixed method approach to develop grounded measures of the social capital of seniors. The project integrates both qualitative and quantitative methods in a 3-phase research design: 1) qualitative, 2) quantitative, and 3) qualitative. Phase 1 uses gender-specific focus groups; phase 2 involves the administration of individual surveys that include a social network module; and phase 3 uses anamolous-case interviews. Not only does the study design allow us to develop grounded measures of social capital but it also permits us to test how well the three methods work separately, and how well they fit together to achieve project goals. This article describes the selection of the study population, the multiple methods used in the research and a brief discussion of our conceptualization and measurement of social capital. PMID:15836784

Subsidence monitoring system for offshore applications: technology scouting and feasibility studies

NASA Astrophysics Data System (ADS)

Miandro, R.; Dacome, C.; Mosconi, A.; Roncari, G.

2015-11-01

Because of concern about possible impacts of hydrocarbon production activities on coastal-area environments and infrastructures, new hydrocarbon offshore development projects in Italy must submit a monitoring plan to Italian authorities to measure and analyse real-time subsidence evolution. The general geological context, where the main offshore Adriatic fields are located, is represented by young unconsolidated terrigenous sediments. In such geological environments, sea floor subsidence, caused by hydrocarbon extraction, is quite probable. Though many tools are available for subsidence monitoring onshore, few are available for offshore monitoring. To fill the gap ENI (Ente Nazionale Idrocarburi) started a research program, principally in collaboration with three companies, to generate a monitoring system tool to measure seafloor subsidence. The tool, according to ENI design technical-specification, would be a robust long pipeline or cable, with a variable or constant outside diameter (less than or equal to 100 mm) and interval spaced measuring points. The design specifications for the first prototype were: to detect 1 mm altitude variation, to work up to 100 m water depth and investigation length of 3 km. Advanced feasibility studies have been carried out with: Fugro Geoservices B.V. (Netherlands), D'Appolonia (Italy), Agisco (Italy). Five design (using three fundamental measurements concepts and five measurement tools) were explored: cable shape changes measured by cable strain using fiber optics (Fugro); cable inclination measured using tiltmeters (D'Appolonia) and measured using fiber optics (Fugro); and internal cable altitude-dependent pressure changes measured using fiber optics (Fugro) and measured using pressure transducers at discrete intervals along the hydraulic system (Agisco). Each design tool was analysed and a rank ordering of preferences was performed. The third method (measurement of pressure changes), with the solution proposed by Agisco, was deemed most feasible. Agisco is building the first prototype of the tool to be installed in an offshore field in the next few years. This paper describes design of instruments from the three companies to satisfy the design specification.

Measurement of forces applied to handgrips and pedals for a sample population of Mexican males.

PubMed

Lara-Lopez, A; Aguilera-Cortes, L A; Barbosa-Castillo, F

1999-04-01

Equipment design requirements for newly industrializing nations often differ from those of highly industrialized nations. In order to develop a 'culturally relevant' technology in Mexico, this paper reports the results of a study, conducted in Guanajuato state, designed to measure the maximum static forces exerted on pulling handgrips and pedals by seated male subjects. The project included the design and construction of an adjustable measuring apparatus. Handgrip measurements were taken with left and right arms at five different elbow angles; pedal measurements with left and right legs at three different knee angles. The arm data indicate that the relationship between appendage angle and force is similar for these data and those previously reported for a US sample, although there are some significant differences in magnitude. Implications of these results for machinery design are discussed.

Anthropometric evaluation and recommendation for primary schools classroom furniture design in Perlis

NASA Astrophysics Data System (ADS)

Shan, Lim Shaiu; Jing, Ewe Hui; Effendi, M. S. M.; Rosli, Muhamad Farizuan

2017-09-01

This study was carried out with the objective to obtain the anthropometric data of primary school children from Year 1 to Year 6 and evaluate the children's anthropometry with the current dimensions of classroom furniture (i.e. chair and table). In addition, this study also proposed the design dimensions for the improvement in classroom furniture design with the consideration of children's anthropometric data. A total of 390 children selected from 13 primary schools in Perlis, Malaysia were participated in this study. There were 11 anthropometric measurements of children have been measured in this study, which include stature (St), popliteal height (PH), knee height (KH), thigh thickness (TT), buttock popliteal length (BPL), hip breadth (HB), sitting shoulder height (SSH), sitting elbow height (SEH), forearm-hand length (FHL), height of lumbar point (HLP) and buttock clearance (BC). Besides that, 7 dimensions relating to current classroom chair have been measured, such as seat height (SH), seat depth (SD), seat width (SW), upper edge of backrest (UEB), lower edge of backrest (LEB), S point (SP), overall chair height (OCH). Another 5 dimensions of the existing classroom table have been measured too, which involve table height (TH), table depth (TD), table width (TW), under table height (UH) and seat to table clearance (STC). All the measurements were performed by using metal measuring tape. The anthropometric data of the children were analyzed with the help of Microsoft Excel 2013. Several equations with associated with the anthropometric data and furniture dimensions have been applied in this research. The new design dimensions for classroom furniture that proposed in this paper which based on the collected anthropometric data can be referred as a guideline for classroom furniture design. The implementation of these data may help to create comfortability, safety, suitability and improve performance of children in the classroom.

Survival-related Selection Bias in Studies of Racial Health Disparities: The Importance of the Target Population and Study Design.

PubMed

Howe, Chanelle J; Robinson, Whitney R

2018-07-01

The impact of survival-related selection bias has not always been discussed in relevant studies of racial health disparities. Moreover, the analytic approaches most frequently employed in the epidemiologic literature to minimize selection bias are difficult to implement appropriately in racial disparities research. This difficulty stems from the fact that frequently employed analytic techniques require that common causes of survival and the outcome are accurately measured. Unfortunately, such common causes are often unmeasured or poorly measured in racial health disparities studies. In the absence of accurate measures of the aforementioned common causes, redefining the target population or changing the study design represents a useful approach for reducing the extent of survival-related selection bias. To help researchers recognize and minimize survival-related selection bias in racial health disparities studies, we illustrate the aforementioned selection bias and how redefining the target population or changing the study design can be useful.

Bayesian design criteria: computation, comparison, and application to a pharmacokinetic and a pharmacodynamic model.

PubMed

Merlé, Y; Mentré, F

1995-02-01

In this paper 3 criteria to design experiments for Bayesian estimation of the parameters of nonlinear models with respect to their parameters, when a prior distribution is available, are presented: the determinant of the Bayesian information matrix, the determinant of the pre-posterior covariance matrix, and the expected information provided by an experiment. A procedure to simplify the computation of these criteria is proposed in the case of continuous prior distributions and is compared with the criterion obtained from a linearization of the model about the mean of the prior distribution for the parameters. This procedure is applied to two models commonly encountered in the area of pharmacokinetics and pharmacodynamics: the one-compartment open model with bolus intravenous single-dose injection and the Emax model. They both involve two parameters. Additive as well as multiplicative gaussian measurement errors are considered with normal prior distributions. Various combinations of the variances of the prior distribution and of the measurement error are studied. Our attention is restricted to designs with limited numbers of measurements (1 or 2 measurements). This situation often occurs in practice when Bayesian estimation is performed. The optimal Bayesian designs that result vary with the variances of the parameter distribution and with the measurement error. The two-point optimal designs sometimes differ from the D-optimal designs for the mean of the prior distribution and may consist of replicating measurements. For the studied cases, the determinant of the Bayesian information matrix and its linearized form lead to the same optimal designs. In some cases, the pre-posterior covariance matrix can be far from its lower bound, namely, the inverse of the Bayesian information matrix, especially for the Emax model and a multiplicative measurement error. The expected information provided by the experiment and the determinant of the pre-posterior covariance matrix generally lead to the same designs except for the Emax model and the multiplicative measurement error. Results show that these criteria can be easily computed and that they could be incorporated in modules for designing experiments.

Splashing Our Way to Playfulness! An Aquatic Playgroup for Young Children with Autism, A Repeated Measures Design

ERIC Educational Resources Information Center

Fabrizi, Sarah E.

2015-01-01

This study investigated the effectiveness of an aquatic playgroup on the playfulness of children, ages 2 to 3 with autism spectrum disorder. Using a repeated measures design, we followed 10 children and their caregivers who participated in a 6-week aquatic playgroup in southwest Florida. Four dyads completed the entire 12-week study period. The…

Measuring the ability of military aircrews to adapt to perceived stressors when undergoing centrifuge training.

PubMed

Wang, Jenhung; Lin, Pei-Chun; Li, Shih-Chin

2014-01-01

This study assessed the ability of military aircrews to adapt to stressors when undergoing centrifuge training and determined what equipment items caused perceived stress and needed to be upgraded. We used questionnaires and the Rasch model to measure aircrew personnel's ability to adapt to centrifuge training. The measurement items were ranked by 611 military aircrew personnel. Analytical results indicated that the majority of the stress perceived by aircrew personnel resulted from the lightproof cockpit without outer reference. This study prioritized the equipment requiring updating as the lightproof cockpit design, the dim lighting of the cockpit, and the pedal design. A significant difference was found between pilot and non-pilot subjects' stress from the pedal design; and considerable association was discernible between the seat angle design and flight hours accrued. The study results provide aviators, astronauts, and air forces with reliable information as to which equipment items need to be urgently upgraded as their present physiological and psychological effects can affect the effectiveness of centrifuge training.

Review of the socket design and interface pressure measurement for transtibial prosthesis.

PubMed

Pirouzi, Gh; Abu Osman, N A; Eshraghi, A; Ali, S; Gholizadeh, H; Wan Abas, W A B

2014-01-01

Socket is an important part of every prosthetic limb as an interface between the residual limb and prosthetic components. Biomechanics of socket-residual limb interface, especially the pressure and force distribution, have effect on patient satisfaction and function. This paper aimed to review and evaluate studies conducted in the last decades on the design of socket, in-socket interface pressure measurement, and socket biomechanics. Literature was searched to find related keywords with transtibial amputation, socket-residual limb interface, socket measurement, socket design, modeling, computational modeling, and suspension system. In accordance with the selection criteria, 19 articles were selected for further analysis. It was revealed that pressure and stress have been studied in the last decaeds, but quantitative evaluations remain inapplicable in clinical settings. This study also illustrates prevailing systems, which may facilitate improvements in socket design for improved quality of life for individuals ambulating with transtibial prosthesis. It is hoped that the review will better facilitate the understanding and determine the clinical relevance of quantitative evaluations.

Review of the Socket Design and Interface Pressure Measurement for Transtibial Prosthesis

PubMed Central

Pirouzi, Gh.; Abu Osman, N. A.; Eshraghi, A.; Ali, S.; Gholizadeh, H.; Wan Abas, W. A. B.

2014-01-01

Socket is an important part of every prosthetic limb as an interface between the residual limb and prosthetic components. Biomechanics of socket-residual limb interface, especially the pressure and force distribution, have effect on patient satisfaction and function. This paper aimed to review and evaluate studies conducted in the last decades on the design of socket, in-socket interface pressure measurement, and socket biomechanics. Literature was searched to find related keywords with transtibial amputation, socket-residual limb interface, socket measurement, socket design, modeling, computational modeling, and suspension system. In accordance with the selection criteria, 19 articles were selected for further analysis. It was revealed that pressure and stress have been studied in the last decaeds, but quantitative evaluations remain inapplicable in clinical settings. This study also illustrates prevailing systems, which may facilitate improvements in socket design for improved quality of life for individuals ambulating with transtibial prosthesis. It is hoped that the review will better facilitate the understanding and determine the clinical relevance of quantitative evaluations. PMID:25197716

A Study of Trial and Error Learning in Technology, Engineering, and Design Education

ERIC Educational Resources Information Center

Franzen, Marissa Marie Sloan

2016-01-01

The purpose of this research study was to determine if trial and error learning was an effective, practical, and efficient learning method for Technology, Engineering, and Design Education students at the post-secondary level. A mixed methods explanatory research design was used to measure the viability of the learning source. The study sample was…

Rotating rake design for unique measurement of fan-generated spinning acoustic modes

NASA Technical Reports Server (NTRS)

Konno, Kevin E.; Hausmann, Clifford R.

1993-01-01

In light of the current emphasis on noise reduction in subsonic aircraft design, NASA has been actively studying the source of and propagation of noise generated by subsonic fan engines. NASA/LeRC has developed and tested a unique method of accurately measuring these spinning acoustic modes generated by an experimental fan. This mode measuring method is based on the use of a rotating microphone rake. Testing was conducted in the 9 x 15 Low-speed Wind Tunnel. The rotating rake was tested with the Advanced Ducted Propeller (ADP) model. This memorandum discusses the design and performance of the motor/drive system for the fan-synchronized rotating acoustic rake. This novel motor/drive design approach is now being adapted for additional acoustic mode studies in new test rigs as baseline data for the future design of active noise control for subsonic fan engines. Included in this memorandum are the research requirements, motor/drive specifications, test performance results, and a description of the controls and software involved.

How does the size and shape of local populations in China compare to general anthropometric surveys currently used for product design?

PubMed

Daniell, Nathan; Fraysse, François; Paul, Gunther

2012-01-01

Anthropometry has long been used for a range of ergonomic applications & product design. Although products are often designed for specific cohorts, anthropometric data are typically sourced from large scale surveys representative of the general population. Additionally, few data are available for emerging markets like China and India. This study measured 80 Chinese males that were representative of a specific cohort targeted for the design of a new product. Thirteen anthropometric measurements were recorded and compared to two large databases that represented a general population, a Chinese database and a Western database. Substantial differences were identified between the Chinese males measured in this study and both databases. The subjects were substantially taller, heavier and broader than subjects in the older Chinese database. However, they were still substantially smaller, lighter and thinner than Western males. Data from current Western anthropometric surveys are unlikely to accurately represent the target population for product designers and manufacturers in emerging markets like China.

Refractory oxide insulated thermocouple designed and analyzed for high temperature applications

NASA Technical Reports Server (NTRS)

Popper, G. F.; Zeren, T. Z.

1969-01-01

Study establishes design criteria for constructing high temperature thermocouple to measure nuclear fuel pin temperature. The study included a literature search to determine the compatibility of material useful for thermocouples, a hot zone error analysis, and a prototype design for hot junction and connector pin connections.

Design of Measure and Control System for Precision Pesticide Deploying Dynamic Simulating Device

NASA Astrophysics Data System (ADS)

Liang, Yong; Liu, Pingzeng; Wang, Lu; Liu, Jiping; Wang, Lang; Han, Lei; Yang, Xinxin

A measure and control system for precision deploying pesticide simulating equipment is designed in order to study pesticide deployment technology. The system can simulate every state of practical pesticide deployment, and carry through precise, simultaneous measure to every factor affecting pesticide deployment effects. The hardware and software incorporates a structural design of modularization. The system is divided into many different function modules of hardware and software, and exploder corresponding modules. The modules’ interfaces are uniformly defined, which is convenient for module connection, enhancement of system’s universality, explodes efficiency and systemic reliability, and make the program’s characteristics easily extended and easy maintained. Some relevant hardware and software modules can be adapted to other measures and control systems easily. The paper introduces the design of special numeric control system, the main module of information acquisition system and the speed acquisition module in order to explain the design process of the module.

Tropical Rainfall Measuring Mission (TRMM) project. VI - Spacecraft, scientific instruments, and launching rocket. Part 1 - Spacecraft

NASA Technical Reports Server (NTRS)

Keating, Thomas; Ihara, Toshio; Miida, Sumio

1990-01-01

A cooperative United States/Japan study was made for one year from 1987 to 1988 regarding the feasibility of the Tropical Rainfall Measuring Mission (TRMM). As part of this study a phase-A-level design of spacecraft for TRMM was developed by NASA/GSFC, and the result was documented in a feasibility study. The phase-A-level design is developed for the TRMM satellite utilizing a multimission spacecraft.

Is protective equipment useful in preventing concussion? A systematic review of the literature.

PubMed

Benson, B W; Hamilton, G M; Meeuwisse, W H; McCrory, P; Dvorak, J

2009-05-01

To determine if there is evidence that equipment use reduces sport concussion risk and/or severity. 12 electronic databases were searched using a combination of Medical Subject Headings and text words to identify relevant articles. Specific inclusion and exclusion criteria were used to select studies for review. Data extracted included design, study population, exposure/outcome measures and results. The quality of evidence was assessed based on epidemiologic criteria regarding internal and external validity (ie, strength of design, sample size/power calculation, selection bias, misclassification bias, control of potential confounding and effect modification). In total, 51 studies were selected for review. A comparison between studies was difficult due to the variability in research designs, definition of concussion, mouthguard/helmet/headgear/face shield types, measurements used to assess exposure and outcomes, and variety of sports assessed. The majority of studies were observational, with 23 analytical epidemiologic designs related to the subject area. Selection bias was a concern in the reviewed studies, as was the lack of measurement and control for potentially confounding variables. There is evidence that helmet use reduces head injury risk in skiing, snowboarding and bicycling, but the effect on concussion risk is inconclusive. No strong evidence exists for the use of mouthguards or face shields to reduce concussion risk. Evidence is provided to suggest that full facial protection in ice hockey may reduce concussion severity, as measured by time loss from competition.

Learning and cognitive fatigue trajectories in multiple sclerosis defined using a burst measurement design.

PubMed

Holtzer, Roee; Foley, Frederick; D'Orio, Vanessa; Spat, Jessica; Shuman, Melissa; Wang, Cuiling

2013-10-01

Compromised learning and cognitive fatigue are critical clinical features in multiple sclerosis. This study was designed to determine the effect of repeated exposures within and across study visits on performance measures of learning and cognitive fatigue in relapsing-remitting multiple sclerosis (RRMS). Thirty patients with RRMS and 30 controls were recruited. Using a burst measurement design (i.e. repeated assessments within and across study visits) the oral version of the Symbol Digit Modalities Test (SDMT) was administered three times during the baseline and two consecutive monthly follow-up visits for a total of nine test administrations. Learning was assessed within and across study visits whereas cognitive fatigue was assessed during the course of each test administration that was divided into three 30-second intervals. Linear mixed-effect models revealed compromised learning within (95% CI: 2.6355 to 3.9867) and across (95% CI: 1.3250 to 3.1861) visits and worse cognitive fatigue (95% CI: -2.1761 to -0.1720) in patients with RRMS compared with controls. Among patients with RRMS, worse self-rated cognitive dysfunction predicted poor learning within (95% CI: -0.1112 to -0.0020) and across (95% CI: -0.0724 to -0.0106) visits. Burst design is optimal to study learning and cognitive fatigue. This methodology, using the SDMT or other time-efficient tests as outcome measures, can be successfully implemented in longitudinal studies and clinical trials.

Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study: research design and methodology

PubMed Central

Badland, Hannah M; Schofield, Grant M; Witten, Karen; Schluter, Philip J; Mavoa, Suzanne; Kearns, Robin A; Hinckson, Erica A; Oliver, Melody; Kaiwai, Hector; Jensen, Victoria G; Ergler, Christina; McGrath, Leslie; McPhee, Julia

2009-01-01

Background Built environment attributes are recognized as being important contributors to physical activity (PA) engagement and body size in adults and children. However, much of the existing research in this emergent public health field is hindered by methodological limitations, including: population and site homogeneity, reliance on self-report measures, aggregated measures of PA, and inadequate statistical modeling. As an integral component of multi-country collaborative research, the Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study seeks to overcome these limitations by determining the strengths of association between detailed measures of the neighborhood built environment with PA levels across multiple domains and body size measures in adults and children. This article outlines the research protocol developed for the URBAN Study. Methods and design The URBAN Study is a multi-centered, stratified, cross-sectional research design, collecting data across four New Zealand cities. Within each city, 12 neighborhoods were identified and selected for investigation based on higher or lower walkability and Māori demographic attributes. Neighborhoods were selected to ensure equal representation of these characteristics. Within each selected neighborhood, 42 households are being randomly selected and an adult and child (where possible) recruited into the study. Data collection includes: objective and self-reported PA engagement, neighborhood perceptions, demographics, and body size measures. The study was designed to recruit approximately 2,000 adults and 250 children into the project. Other aspects of the study include photovoice, which is a qualitative assessment of built environment features associated with PA engagement, an audit of the neighborhood streetscape environment, and an individualized neighborhood walkability profile centered on each participant's residential address. Multilevel modeling will be used to examine the individual-level and neighborhood-level relationships with PA engagement and body size. Discussion The URBAN Study is applying a novel scientifically robust research design to provide urgently needed epidemiological information regarding the associations between the built environment and health outcomes. The findings will contribute to a larger, international initiative in which similar neighborhood selection and PA measurement procedures are utilized across eight countries. Accordingly, this study directly addresses the international priority issues of increasing PA engagement and decreasing obesity levels. PMID:19589175

Assessment and control design for steam vent noise in an oil refinery.

PubMed

Monazzam, Mohammad Reza; Golmohammadi, Rostam; Nourollahi, Maryam; Momen Bellah Fard, Samaneh

2011-06-13

Noise is one of the most important harmful agents in work environment. Noise pollution in oil refinery industries is related to workers' health. This study aimed to determine the overall noise pollution of an oil refinery operation and its frequency analysis to determine the control plan for a vent noise in these industries. This experimental study performed in control unit of Tehran Oil Refinery in 2008. To determine the noise distributions, environmental noise measurements were carried out by lattice method according to basic information and technical process. The sound pressure level and frequency distribution was measured for each study sources subject separately was performed individually. According to the vent's specification, the measured steam noise characteristics reviewed and compared to the theoretical results of steam noise estimation. Eventually, a double expansion muffler was designed. Data analysis and graphical design were carried out using Excel software. The results of environmental noise measurements indicated that the level of sound pressure was above the national permitted level (85 dB (A)). The Mean level of sound pressure of the studied steam jet was 90.3 dB (L). The results of noise frequency analysis for the steam vents showed that the dominant frequency was 4000 Hz. To obtain 17 dB noise reductions, a double chamber aluminum muffler with 500 mm length and 200 mm diameter consisting pipe drilled was designed. The characteristics of steam vent noise were separated from other sources, a double expansion muffler was designed using a new method based on the level of steam noise, and principle sound frequency, a double expansion muffler was designed.

Perspective: Randomized Controlled Trials Are Not a Panacea for Diet-Related Research12

PubMed Central

Hébert, James R; Frongillo, Edward A; Adams, Swann A; Turner-McGrievy, Gabrielle M; Hurley, Thomas G; Miller, Donald R; Ockene, Ira S

2016-01-01

Research into the role of diet in health faces a number of methodologic challenges in the choice of study design, measurement methods, and analytic options. Heavier reliance on randomized controlled trial (RCT) designs is suggested as a way to solve these challenges. We present and discuss 7 inherent and practical considerations with special relevance to RCTs designed to study diet: 1) the need for narrow focus; 2) the choice of subjects and exposures; 3) blinding of the intervention; 4) perceived asymmetry of treatment in relation to need; 5) temporal relations between dietary exposures and putative outcomes; 6) strict adherence to the intervention protocol, despite potential clinical counter-indications; and 7) the need to maintain methodologic rigor, including measuring diet carefully and frequently. Alternatives, including observational studies and adaptive intervention designs, are presented and discussed. Given high noise-to-signal ratios interjected by using inaccurate assessment methods in studies with weak or inappropriate study designs (including RCTs), it is conceivable and indeed likely that effects of diet are underestimated. No matter which designs are used, studies will require continued improvement in the assessment of dietary intake. As technology continues to improve, there is potential for enhanced accuracy and reduced user burden of dietary assessments that are applicable to a wide variety of study designs, including RCTs. PMID:27184269

Recommendations for research design of telehealth studies.

PubMed

Chumbler, Neale R; Kobb, Rita; Brennan, David M; Rabinowitz, Terry

2008-11-01

Properly designed randomized controlled trials (RCTs) are the gold standard to use when examining the effectiveness of telehealth interventions on clinical outcomes. Some published telehealth studies have employed well-designed RCTs. However, such methods are not always feasible and practical in particular settings. This white paper addresses not only the need for properly designed RCTs, but also offers alternative research designs, such as quasi-experimental designs, and statistical techniques that can be employed to rigorously assess the effectiveness of telehealth studies. This paper further offers design and measurement recommendations aimed at and relevant to administrative decision-makers, policymakers, and practicing clinicians.

New Horizons: Designing and Measuring for Modern Learning Environments

ERIC Educational Resources Information Center

Carter, Richard Allen, Jr.

2017-01-01

This dissertation consists of five chapters. The first chapter serves to introduce the Modern Learning Environment (MLE) by discussing the challenges of designing and measuring student performance in these novel environments. Chapter two of the dissertation reviews the current research base of studying self-regulated learning in the modern…

40 CFR 799.9420 - TSCA carcinogenicity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... inhalation equipment designed to sustain a minimum air flow of 10 air changes per hr, an adequate oxygen... sufficient. If pretest measurements are not within 10% of each other, three to four measurements should be... methods including significance criteria shall be selected during the design of the study. (2) Evaluation...

40 CFR 799.9420 - TSCA carcinogenicity.

Code of Federal Regulations, 2011 CFR

2011-07-01

... inhalation equipment designed to sustain a minimum air flow of 10 air changes per hr, an adequate oxygen... sufficient. If pretest measurements are not within 10% of each other, three to four measurements should be... methods including significance criteria shall be selected during the design of the study. (2) Evaluation...

40 CFR 799.9420 - TSCA carcinogenicity.

Code of Federal Regulations, 2012 CFR

2012-07-01

... inhalation equipment designed to sustain a minimum air flow of 10 air changes per hr, an adequate oxygen... sufficient. If pretest measurements are not within 10% of each other, three to four measurements should be... methods including significance criteria shall be selected during the design of the study. (2) Evaluation...

40 CFR 799.9420 - TSCA carcinogenicity.

Code of Federal Regulations, 2013 CFR

2013-07-01

... inhalation equipment designed to sustain a minimum air flow of 10 air changes per hr, an adequate oxygen... sufficient. If pretest measurements are not within 10% of each other, three to four measurements should be... methods including significance criteria shall be selected during the design of the study. (2) Evaluation...

40 CFR 799.9420 - TSCA carcinogenicity.

Code of Federal Regulations, 2014 CFR

2014-07-01

... inhalation equipment designed to sustain a minimum air flow of 10 air changes per hr, an adequate oxygen... sufficient. If pretest measurements are not within 10% of each other, three to four measurements should be... methods including significance criteria shall be selected during the design of the study. (2) Evaluation...

Examining Teacher Grades Using Rasch Measurement Theory

ERIC Educational Resources Information Center

Randall, Jennifer; Engelhard, George, Jr.

2009-01-01

In this study, we present an approach to questionnaire design within educational research based on Guttman's mapping sentences and Many-Facet Rasch Measurement Theory. We designed a 54-item questionnaire using Guttman's mapping sentences to examine the grading practices of teachers. Each item in the questionnaire represented a unique student…

Application of design for six sigma methodology on portable water filter that uses membrane filtration system: A preliminary study

NASA Astrophysics Data System (ADS)

Fahrul Hassan, Mohd; Jusoh, Suhada; Zaini Yunos, Muhamad; Arifin, A. M. T.; Ismail, A. E.; Rasidi Ibrahim, M.; Zulafif Rahim, M.

2017-09-01

Portable water filter has grown significantly in recent years. The use of water bottles as a water drink stuff using hand pump water filtration unit has been suggested to replace water bottled during outdoor recreational activities and for emergency supplies. However, quality of water still the issue related to contaminated water due to the residual waste plants, bacteria, and so on. Based on these issues, the study was carried out to design a portable water filter that uses membrane filtration system by applying Design for Six Sigma. Design for Six Sigma methodology consists of five stages which is Define, Measure, Analyze, Design and Verify. There were several tools have been used in each stage in order to come out with a specific objective. In the Define stage, questionnaire approach was used to identify the needs of portable water filter in the future from potential users. Next, Quality Function Deployment (QFD) tool was used in the Measure stage to measure the users’ needs into engineering characteristics. Based on the information in the Measure stage, morphological chart and weighted decision matrix tools were used in the Analyze stage. This stage performed several activities including concept generation and selection. Once the selection of the final concept completed, detail drawing was made in the Design stage. Then, prototype was developed in the Verify stage to conduct proof-of-concept testing. The results that obtained from each stage have been reported in this paper. From this study, it can be concluded that the application of Design for Six Sigma in designing a future portable water filter that uses membrane filtration system is a good start in looking for a new alternative concept with a completed supporting document.

An empirical study of software design practices

NASA Technical Reports Server (NTRS)

Card, David N.; Church, Victor E.; Agresti, William W.

1986-01-01

Software engineers have developed a large body of software design theory and folklore, much of which was never validated. The results of an empirical study of software design practices in one specific environment are presented. The practices examined affect module size, module strength, data coupling, descendant span, unreferenced variables, and software reuse. Measures characteristic of these practices were extracted from 887 FORTRAN modules developed for five flight dynamics software projects monitored by the Software Engineering Laboratory (SEL). The relationship of these measures to cost and fault rate was analyzed using a contingency table procedure. The results show that some recommended design practices, despite their intuitive appeal, are ineffective in this environment, whereas others are very effective.

Pressure Distribution and Air Data System for the Aeroassist Flight Experiment

NASA Technical Reports Server (NTRS)

Gibson, Lorelei S.; Siemers, Paul M., III; Kern, Frederick A.

1989-01-01

The Aeroassist Flight Experiment (AFE) is designed to provide critical flight data necessary for the design of future Aeroassist Space Transfer Vehicles (ASTV). This flight experiment will provide aerodynamic, aerothermodynamic, and environmental data for verification of experimental and computational flow field techniques. The Pressure Distribution and Air Data System (PD/ADS), one of the measurement systems incorporated into the AFE spacecraft, is designed to provide accurate pressure measurements on the windward surface of the vehicle. These measurements will be used to determine the pressure distribution and air data parameters (angle of attack, angle of sideslip, and free-stream dynamic pressure) encountered by the blunt-bodied vehicle over an altitude range of 76.2 km to 94.5 km. Design and development data are presented and include: measurement requirements, measurement heritage, theoretical studies to define the vehicle environment, flush-mounted orifice configuration, pressure transducer selection and performance evaluation data, and pressure tubing response analysis.

Portable device for the detection of nitro-explosives based on optical properties of sensor's material

NASA Astrophysics Data System (ADS)

Baranova, A. A.; Khokhlov, K. O.

2014-11-01

The aim of this study was to design a device for explosives detection. The study design is based on excited steady-state luminescence quenching registration. Sensor's material luminescence intensity reduction occurs due to an interaction of explosives vapours contained in the air. The decrease rate of the luminescence intensity indicates the concentration of vapours. To study the luminescent properties of the sensor element, its luminescence spectra excited by photons with energies in the range 280 - 425 nm were measured. The excitation photoluminescence spectra for luminescence bands of the sensor element were also measured. Excitation source was light emitting diode (375 nm) and luminescent signal receiver was a photodiode (430 - 650 nm) in device designed. The device is operated under control of a program. The algorithm provides multiple operating modes (configuration, calibration, measurement etc.). Thus this device is referred to the class of devices with increased sensitivity to the explosives vapors. The advantages of device are autonomic power, small weight and sizes, simplicity of device operation for measurements.

Simulation of Wind Profile Perturbations for Launch Vehicle Design

NASA Technical Reports Server (NTRS)

Adelfang, S. I.

2004-01-01

Ideally, a statistically representative sample of measured high-resolution wind profiles with wavelengths as small as tens of meters is required in design studies to establish aerodynamic load indicator dispersions and vehicle control system capability. At most potential launch sites, high- resolution wind profiles may not exist. Representative samples of Rawinsonde wind profiles to altitudes of 30 km are more likely to be available from the extensive network of measurement sites established for routine sampling in support of weather observing and forecasting activity. Such a sample, large enough to be statistically representative of relatively large wavelength perturbations, would be inadequate for launch vehicle design assessments because the Rawinsonde system accurately measures wind perturbations with wavelengths no smaller than 2000 m (1000 m altitude increment). The Kennedy Space Center (KSC) Jimsphere wind profiles (150/month and seasonal 2 and 3.5-hr pairs) are the only adequate samples of high resolution profiles approx. 150 to 300 m effective resolution, but over-sampled at 25 m intervals) that have been used extensively for launch vehicle design assessments. Therefore, a simulation process has been developed for enhancement of measured low-resolution Rawinsonde profiles that would be applicable in preliminary launch vehicle design studies at launch sites other than KSC.

Discriminatory validity of the Aspects of Wheelchair Mobility Test as demonstrated by a comparison of four wheelchair types designed for use in low-resource areas

PubMed Central

Hamm, Elisa; Wee, Joy

2017-01-01

Background Comparative effectiveness research on wheelchairs available in low-resource areas is needed to enable effective use of limited funds. Mobility on commonly encountered rolling environments is a key aspect of function. High variation in capacity among wheelchair users can mask changes in mobility because of wheelchair design. A repeated measures protocol in which the participants use one type of wheelchair and then another minimises the impact of individual variation. Objectives The Aspects of Wheelchair Mobility Test (AWMT) was designed to be used in repeated measures studies in low-resource areas. It measures the impact of different wheelchair types on physical performance in commonly encountered rolling environments and provides an opportunity for qualitative and quantitative participant response. This study sought to confirm the ability of the AWMT to discern differences in mobility because of wheelchair design. Method Participants were wheelchair users at a boarding school for students with disabilities in a low-resource area. Each participant completed timed tests on measured tracks on rough and smooth surfaces, in tight spaces and over curbs. Four types of wheelchairs designed for use in low-resource areas were included. Results The protocol demonstrated the ability to discriminate changes in mobility of individuals because of wheelchair type. Conclusion Comparative effectiveness studies with this protocol can enable beneficial change. This is illustrated by design alterations by wheelchair manufacturers in response to results. PMID:28936413

Measuring Maternal Behaviors in the Neonatal Intensive Care Unit

ERIC Educational Resources Information Center

Lakes, Kimberley D.; Guo, Yuqing; Taylor Lucas, Candice; Cooper, Dan

2017-01-01

One of the most important considerations in designing clinical infant research studies is the selection of reliable and valid measurement procedures. Few measures of caregiver-child interactions have been studied with newborns, particularly premature infants. The main objective of this study was to examine psychometric properties of the National…

Measurement properties of continuous text reading performance tests.

PubMed

Brussee, Tamara; van Nispen, Ruth M A; van Rens, Ger H M B

2014-11-01

Measurement properties of tests to assess reading acuity or reading performance have not been extensively evaluated. This study aims to provide an overview of the literature on available continuous text reading tests and their measurement properties. A literature search was performed in PubMed, Embase and PsycInfo. Subsequently, information on design and content of reading tests, study design and measurement properties were extracted using consensus-based standards for selection of health measurement instruments. Quality of studies, reading tests and measurement properties were systematically assessed using pre-specified criteria. From 2334 identified articles, 20 relevant articles were found on measurement properties of three reading tests in various languages: IReST, MNread Reading Test and Radner Reading Charts. All three reading tests scored high on content validity. Reproducibility studies (repeated measurements between different testing sessions) of the IReST and MNread of commercially available reading tests in different languages were missing. The IReST scored best on inter-language comparison, the MNread scored well in repeatability studies (repeated measurements under the same conditions) and the Radner showed good reproducibility in studies. Although in daily practice there are other continuous text reading tests available meeting the criteria of this review, measurement properties were described in scientific studies for only three of them. Of the few available studies, the quality and content of study design and methodology used varied. For testing existing reading tests and the development of new ones, for example in other languages, we make several recommendations, including careful description of patient characteristics, use of objective and subjective lighting levels, good control of working distance, documentation of the number of raters and their training, careful documentation of scoring rules and the use of Bland-Altman analyses or similar for reproducibility and repeatability studies. © 2014 The Authors Ophthalmic & Physiological Optics © 2014 The College of Optometrists.

The Bobath (NDT) concept in adult neurological rehabilitation: what is the state of the knowledge? A scoping review. Part II: intervention studies perspectives.

PubMed

Vaughan-Graham, Julie; Cott, Cheryl; Wright, F Virginia

2015-01-01

The study's purpose was to describe the range of knowledge pertaining to the Bobath (NDT) concept in adult neurological rehabilitation, synthesizes the findings, identify knowledge gaps and develop empirically based recommendations for future research. A scoping review of research and non-research articles published from 2007 to 2012. Two independent reviewers selected studies based on a systematic procedure. Inclusion criteria for studies were electronically accessible English language literature with Bobath and/or Neurodevelopmental Therapy as the subject heading in the title/keyword/abstract/intervention comparison with respect to adult neurological conditions. Data were abstracted and summarized with respect to study design, theoretical framework, clinical application including population representation, study fidelity, intervention comparison, duration of care, measurement and findings. Of the 33 publications identified 17 were intervention studies (11 RCT's/1 prospective parallel group design/5 N-of-1). One other paper was a systematic review. The intervention studies, primarily RCT designs, have serious methodological concerns particularly related to study/treatment fidelity and measurement resulting in no clear clinical direction. Aspects such as theoretical framework, therapist skill, quality of movement measurement and individualized interventions require careful consideration in the design of Bobath studies. Implications for Rehabilitation Future intervention studies should be based on the current Bobath theoretical framework and key aspects of clinical practice. Study and treatment fidelity issues need to be carefully considered when interpreting the results of existing RCT's evaluating the Bobath concept. N-of-1 randomized, observational, factorial and mixed method study designs should be considered as alternative study options.

Dust-concentration measurement based on Mie scattering of a laser beam

PubMed Central

Yu, Xiaoyu; Shi, Yunbo; Wang, Tian; Sun, Xu

2017-01-01

To realize automatic measurement of the concentration of dust particles in the air, a theory for dust concentration measurement was developed, and a system was designed to implement the dust concentration measurement method based on laser scattering. In the study, the principle of dust concentration detection using laser scattering is studied, and the detection basis of Mie scattering theory is determined. Through simulation, the influence of the incident laser wavelength, dust particle diameter, and refractive index of dust particles on the scattered light intensity distribution are obtained for determining the scattered light intensity curves of single suspended dust particles under different characteristic parameters. A genetic algorithm was used to study the inverse particle size distribution, and the reliability of the measurement system design is proven theoretically. The dust concentration detection system, which includes a laser system, computer circuitry, air flow system, and control system, was then implemented according to the parameters obtained from the theoretical analysis. The performance of the designed system was evaluated. Experimental results show that the system performance was stable and reliable, resulting in high-precision automatic dust concentration measurement with strong anti-interference ability. PMID:28767662

A systematic composite service design modeling method using graph-based theory.

PubMed

Elhag, Arafat Abdulgader Mohammed; Mohamad, Radziah; Aziz, Muhammad Waqar; Zeshan, Furkh

2015-01-01

The composite service design modeling is an essential process of the service-oriented software development life cycle, where the candidate services, composite services, operations and their dependencies are required to be identified and specified before their design. However, a systematic service-oriented design modeling method for composite services is still in its infancy as most of the existing approaches provide the modeling of atomic services only. For these reasons, a new method (ComSDM) is proposed in this work for modeling the concept of service-oriented design to increase the reusability and decrease the complexity of system while keeping the service composition considerations in mind. Furthermore, the ComSDM method provides the mathematical representation of the components of service-oriented design using the graph-based theoryto facilitate the design quality measurement. To demonstrate that the ComSDM method is also suitable for composite service design modeling of distributed embedded real-time systems along with enterprise software development, it is implemented in the case study of a smart home. The results of the case study not only check the applicability of ComSDM, but can also be used to validate the complexity and reusability of ComSDM. This also guides the future research towards the design quality measurement such as using the ComSDM method to measure the quality of composite service design in service-oriented software system.

Accelerated longitudinal designs: An overview of modelling, power, costs and handling missing data.

PubMed

Galbraith, Sally; Bowden, Jack; Mander, Adrian

2017-02-01

Longitudinal studies are often used to investigate age-related developmental change. Whereas a single cohort design takes a group of individuals at the same initial age and follows them over time, an accelerated longitudinal design takes multiple single cohorts, each one starting at a different age. The main advantage of an accelerated longitudinal design is its ability to span the age range of interest in a shorter period of time than would be possible with a single cohort longitudinal design. This paper considers design issues for accelerated longitudinal studies. A linear mixed effect model is considered to describe the responses over age with random effects for intercept and slope parameters. Random and fixed cohort effects are used to cope with the potential bias accelerated longitudinal designs have due to multiple cohorts. The impact of other factors such as costs and the impact of dropouts on the power of testing or the precision of estimating parameters are examined. As duration-related costs increase relative to recruitment costs the best designs shift towards shorter duration and eventually cross-sectional design being best. For designs with the same duration but differing interval between measurements, we found there was a cutoff point for measurement costs relative to recruitment costs relating to frequency of measurements. Under our model of 30% dropout there was a maximum power loss of 7%.

A Systematic Composite Service Design Modeling Method Using Graph-Based Theory

PubMed Central

Elhag, Arafat Abdulgader Mohammed; Mohamad, Radziah; Aziz, Muhammad Waqar; Zeshan, Furkh

2015-01-01

The composite service design modeling is an essential process of the service-oriented software development life cycle, where the candidate services, composite services, operations and their dependencies are required to be identified and specified before their design. However, a systematic service-oriented design modeling method for composite services is still in its infancy as most of the existing approaches provide the modeling of atomic services only. For these reasons, a new method (ComSDM) is proposed in this work for modeling the concept of service-oriented design to increase the reusability and decrease the complexity of system while keeping the service composition considerations in mind. Furthermore, the ComSDM method provides the mathematical representation of the components of service-oriented design using the graph-based theoryto facilitate the design quality measurement. To demonstrate that the ComSDM method is also suitable for composite service design modeling of distributed embedded real-time systems along with enterprise software development, it is implemented in the case study of a smart home. The results of the case study not only check the applicability of ComSDM, but can also be used to validate the complexity and reusability of ComSDM. This also guides the future research towards the design quality measurement such as using the ComSDM method to measure the quality of composite service design in service-oriented software system. PMID:25928358

People’s Preferences of Urban Design Qualities for Walking on a Commercial Street

NASA Astrophysics Data System (ADS)

Ernawati, J.; Surjono; Sudarmo, B. S.

2018-03-01

This research aims to explore people’s preferences of urban design qualities for walking on a commercial street, with Kawi Street located in a commercial neighborhood in the town of Malang Indonesia as the case study. Based on a literature review, this study used eight urban design qualities, i.e., enclosure, legibility, human scale, transparency, complexity, coherence, linkage, and imageability. This study applied a survey research method using a self-administered paper-pencil questionnaire applying two measurement techniques: Likert scale was used to explore people’s evaluations of urban design qualities of the street, while multiple-rating scales were used to measure people’s preference for walking on the street. One hundred and ten people randomly selected as respondents. Regression analysis was employed to explore the influence of urban design qualities on people preference for walking. Results indicated four urban design qualities that affect people’s choice for walking on a commercial street, i.e., transparency, coherence, linkage, and imageability. Implications of the findings will be discussed in the paper.

Temporary practice pause then resumption (TPPR) study design: an extension of the withdrawal study design to complementary and alternative medicine mind and body interventions (CAM-MABI).

PubMed

Braun, M Miles

2013-10-01

Study of complementary and alternative medicine's mind and body interventions (CAM-MABI) is hindered not only by the inability to mask participants and their teachers to the study intervention but also by the major practical hurdles of long-term study of practices that can be lifelong. Two other important methodological problems are that study of newly trained practitioners cannot directly address long-term practice, and that long-term practitioners likely self-select in ways that make finding appropriate controls (or a comparison group) challenging. The temporary practice pause then resumption study design (TPPR) introduced here is a new tool that extends the withdrawal study design, established in the field of drug evaluation, to the field of CAM-MABI. With the exception of the inability to mask, TPPR can address the other methodological problems noted above. Of great interest to investigators will likely be measures in practitioners of CAM-MABI that change with temporary pausing of CAM-MABI practice, followed by return of the measures to pre-pause levels with resumption of practice; this would suggest a link of the practice to measured changes. Such findings using this tool may enhance our insight into fundamental biological processes, leading to beneficial practical applications.

Methodology Series Module 3: Cross-sectional Studies.

PubMed

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case-control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design.

Methodology Series Module 3: Cross-sectional Studies

PubMed Central

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case–control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design. PMID:27293245

Optimal Design for Informative Protocols in Xenograft Tumor Growth Inhibition Experiments in Mice.

PubMed

Lestini, Giulia; Mentré, France; Magni, Paolo

2016-09-01

Tumor growth inhibition (TGI) models are increasingly used during preclinical drug development in oncology for the in vivo evaluation of antitumor effect. Tumor sizes are measured in xenografted mice, often only during and shortly after treatment, thus preventing correct identification of some TGI model parameters. Our aims were (i) to evaluate the importance of including measurements during tumor regrowth and (ii) to investigate the proportions of mice included in each arm. For these purposes, optimal design theory based on the Fisher information matrix implemented in PFIM4.0 was applied. Published xenograft experiments, involving different drugs, schedules, and cell lines, were used to help optimize experimental settings and parameters using the Simeoni TGI model. For each experiment, a two-arm design, i.e., control versus treatment, was optimized with or without the constraint of not sampling during tumor regrowth, i.e., "short" and "long" studies, respectively. In long studies, measurements could be taken up to 6 g of tumor weight, whereas in short studies the experiment was stopped 3 days after the end of treatment. Predicted relative standard errors were smaller in long studies than in corresponding short studies. Some optimal measurement times were located in the regrowth phase, highlighting the importance of continuing the experiment after the end of treatment. In the four-arm designs, the results showed that the proportions of control and treated mice can differ. To conclude, making measurements during tumor regrowth should become a general rule for informative preclinical studies in oncology, especially when a delayed drug effect is suspected.

Optimal design for informative protocols in xenograft tumor growth inhibition experiments in mice

PubMed Central

Lestini, Giulia; Mentré, France; Magni, Paolo

2016-01-01

Tumor growth inhibition (TGI) models are increasingly used during preclinical drug development in oncology for the in vivo evaluation of antitumor effect. Tumor sizes are measured in xenografted mice, often only during and shortly after treatment, thus preventing correct identification of some TGI model parameters. Our aims were i) to evaluate the importance of including measurements during tumor regrowth; ii) to investigate the proportions of mice included in each arm. For these purposes, optimal design theory based on the Fisher information matrix implemented in PFIM4.0 was applied. Published xenograft experiments, involving different drugs, schedules and cell lines, were used to help optimize experimental settings and parameters using the Simeoni TGI model. For each experiment, a two-arm design, i.e. control vs treatment, was optimized with or without the constraint of not sampling during tumor regrowth, i.e. “short” and “long” studies, respectively. In long studies, measurements could be taken up to 6 grams of tumor weight, whereas in short studies the experiment was stopped three days after the end of treatment. Predicted relative standard errors were smaller in long studies than in corresponding short studies. Some optimal measurement times were located in the regrowth phase, highlighting the importance of continuing the experiment after the end of treatment. In the four-arm designs, the results showed that the proportions of control and treated mice can differ. To conclude, making measurements during tumor regrowth should become a general rule for informative preclinical studies in oncology, especially when a delayed drug effect is suspected. PMID:27306546

Effects of Newly Designed Hospital Buildings on Staff Perceptions: A Pre-Post Study to Validate Design Decisions.

PubMed

Schreuder, Eliane; van Heel, Liesbeth; Goedhart, Rien; Dusseldorp, Elise; Schraagen, Jan Maarten; Burdorf, Alex

2015-01-01

This study investigates effects of the newly built nonpatient-related buildings of a large university medical center on staff perceptions and whether the design objectives were achieved. The medical center is gradually renewing its hospital building area of 200,000 m.(2) This redevelopment is carefully planned and because lessons learned can guide design decisions of the next phase, the medical center is keen to evaluate the performance of the new buildings. A pre- and post-study with a control group was conducted. Prior to the move to the new buildings an occupancy evaluation was carried out in the old setting (n = 729) (pre-study). Post occupation of the new buildings another occupancy evaluation (post-study) was carried out in the new setting (intervention group) and again in some old settings (control group) (n = 664). The occupancy evaluation consisted of an online survey that measured the perceived performance of different aspects of the building. Longitudinal multilevel analysis was used to compare the performance of the old buildings with the new buildings. Significant improvements were found in indoor climate, perceived safety, working environment, well-being, facilities, sustainability, and overall satisfaction. Commitment to the employer, working atmosphere, orientation, work performance, and knowledge sharing did not improve. The results were interpreted by relating them to specific design choices. We showed that it is possible to measure the performance improvements of a complex intervention being a new building design and validate design decisions. A focused design process aiming for a safe, pleasant and sustainable building resulted in actual improvements in some of the related performance measures. © The Author(s) 2015.

LIFESPAN: A tool for the computer-aided design of longitudinal studies

PubMed Central

Brandmaier, Andreas M.; von Oertzen, Timo; Ghisletta, Paolo; Hertzog, Christopher; Lindenberger, Ulman

2015-01-01

Researchers planning a longitudinal study typically search, more or less informally, a multivariate space of possible study designs that include dimensions such as the hypothesized true variance in change, indicator reliability, the number and spacing of measurement occasions, total study time, and sample size. The main search goal is to select a research design that best addresses the guiding questions and hypotheses of the planned study while heeding applicable external conditions and constraints, including time, money, feasibility, and ethical considerations. Because longitudinal study selection ultimately requires optimization under constraints, it is amenable to the general operating principles of optimization in computer-aided design. Based on power equivalence theory (MacCallum et al., 2010; von Oertzen, 2010), we propose a computational framework to promote more systematic searches within the study design space. Starting with an initial design, the proposed framework generates a set of alternative models with equal statistical power to detect hypothesized effects, and delineates trade-off relations among relevant parameters, such as total study time and the number of measurement occasions. We present LIFESPAN (Longitudinal Interactive Front End Study Planner), which implements this framework. LIFESPAN boosts the efficiency, breadth, and precision of the search for optimal longitudinal designs. Its initial version, which is freely available at http://www.brandmaier.de/lifespan, is geared toward the power to detect variance in change as specified in a linear latent growth curve model. PMID:25852596

[Design and study of parallel computing environment of Monte Carlo simulation for particle therapy planning using a public cloud-computing infrastructure].

PubMed

Yokohama, Noriya

2013-07-01

This report was aimed at structuring the design of architectures and studying performance measurement of a parallel computing environment using a Monte Carlo simulation for particle therapy using a high performance computing (HPC) instance within a public cloud-computing infrastructure. Performance measurements showed an approximately 28 times faster speed than seen with single-thread architecture, combined with improved stability. A study of methods of optimizing the system operations also indicated lower cost.

Implementation of tuberculosis infection control measures in designated hospitals in Zhejiang Province, China: are we doing enough to prevent nosocomial tuberculosis infections?

PubMed

Chen, Bin; Liu, Min; Gu, Hua; Wang, Xiaomeng; Qiu, Wei; Shen, Jian; Jiang, Jianmin

2016-03-03

Tuberculosis (TB) infection control measures are very important to prevent nosocomial transmission and protect healthcare workers (HCWs) in hospitals. The TB infection control situation in TB treatment institutions in southeastern China has not been studied previously. Therefore, the aim of this study was to investigate the implementation of TB infection control measures in TB-designated hospitals in Zhejiang Province, China. Cross-sectional survey using observation and interviews. All TB-designated hospitals (n=88) in Zhejiang Province, China in 2014. Managerial, administrative, environmental and personal infection control measures were assessed using descriptive analyses and univariate logistic regression analysis. The TB-designated hospitals treated a median of 3030 outpatients (IQR 764-7094) and 279 patients with confirmed TB (IQR 154-459) annually, and 160 patients with TB (IQR 79-426) were hospitalised in the TB wards. Most infection control measures were performed by the TB-designated hospitals. Measures including regular monitoring of TB infection control in high-risk areas (49%), shortening the wait times (42%), and providing a separate waiting area for patients with suspected TB (46%) were sometimes neglected. N95 respirators were available in 85 (97%) hospitals, although only 44 (50%) hospitals checked that they fit. Hospitals with more TB staff and higher admission rates of patients with TB were more likely to set a dedicated sputum collection area and to conduct annual respirator fit testing. TB infection control measures were generally implemented by the TB-designated hospitals. Measures including separation of suspected patients, regular monitoring of infection control practices, and regular fit testing of respirators should be strengthened. Infection measures for sputum collection and respirator fit testing should be improved in hospitals with lower admission rates of patients with TB. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Methodology on Investigating the Influences of Automated Material Handling System in Automotive Assembly Process

NASA Astrophysics Data System (ADS)

Saffar, Seha; Azni Jafar, Fairul; Jamaludin, Zamberi

2016-02-01

A case study was selected as a method to collect data in actual industry situation. The study aimed to assess the influences of automated material handling system in automotive industry by proposing a new design of integration system through simulation, and analyze the significant effect and influence of the system. The method approach tool will be CAD Software (Delmia & Quest). The process of preliminary data gathering in phase 1 will collect all data related from actual industry situation. It is expected to produce a guideline and limitation in designing a new integration system later. In phase 2, an idea or concept of design will be done by using 10 principles of design consideration for manufacturing. A full factorial design will be used as design of experiment in order to analyze the performance measured of the integration system with the current system in case study. From the result of the experiment, an ANOVA analysis will be done to study the performance measured. Thus, it is expected that influences can be seen from the improvement made in the system.

Design, data, and theory regarding a digital hand inclinometer: a portable device for studying slant perception.

PubMed

Li, Zhi; Durgin, Frank H

2011-06-01

Palm boards are often used as a nonverbal measure in human slant perception studies. It was recently found that palm boards are biased and relatively insensitive measures, and that an unrestricted hand gesture provides a more sensitive response (Durgin, Hajnal, Li, Tonge, & Stigliani, Acta Psychologica, 134, 182-197, 2010a). In this article, we describe an original design for a portable lightweight digital device for measuring hand orientation. This device is microcontroller-based and uses a micro inclinometer chip as its inclination sensor. The parts are fairly inexpensive. This device, used to measure hand orientation, provides a sensitive nonverbal method for studying slant perception, which can be used in both indoor and outdoor environments. We present data comparing the use of a free hand to palm-board and verbal measures for surfaces within reach and explain how to interpret free-hand measures for outdoor hills.

Carotid Intima-Media Thickness Studies: Study Design and Data Analysis

PubMed Central

Bots, Michiel L.

2013-01-01

Background Carotid intima-media thickness (CIMT) measurements have been widely used as primary endpoint in studies into the effects of new interventions as alternative for cardiovascular morbidity and mortality. There are no accepted standards on the use of CIMT measurements in intervention studies and choices in the design and analysis of a CIMT study are generally based on experience and expert opinion. In the present review, we provide an overview of the current evidence on several aspects in the design and analysis of a CIMT study on the early effects of new interventions. Summary of Issues A balanced evaluation of the carotid segments, carotid walls, and image view to be used as CIMT study endpoint; the reading method (manual or semi-automated and continuously or in batch) to be employed, the required sample size, and the frequency of ultrasound examinations is provided. We also discuss the preferred methods to analyse longitudinal CIMT data and address the possible impact of, and methods to deal with missing and biologically implausible CIMT values. Conclusions Linear mixed effects models are the preferred way to analyse CIMT data and do appropriately handle missing and biologically implausible CIMT values. Furthermore, we recommend to use extensive CIMT designs that measure CIMT at regular points during the multiple carotid sites as such approach is likely to increase the success rates of CIMT intervention studies designed to evaluate the effects of new interventions on atherosclerotic burden. PMID:24324938

New methodology of measurement the unsteady thermal cooling of objects

NASA Astrophysics Data System (ADS)

Winczek, Jerzy

2018-04-01

The problems of measurements of unsteady thermal turbulent flow affect a many of domains, such as heat energy, manufacturing technologies, and many others. The subject of the study is focused on the analysis of current state of the problem, overview of the design solutions and methods to measure non-stationary thermal phenomena, presentation, and choice of adequate design of the cylinder, development of the method to measure and calculate basic values that characterize the process of heat exchange on the model surface.

Alcohol Warning Label Awareness and Attention: A Multi-method Study.

PubMed

Pham, Cuong; Rundle-Thiele, Sharyn; Parkinson, Joy; Li, Shanshi

2018-01-01

Evaluation of alcohol warning labels requires careful consideration ensuring that research captures more than awareness given that labels may not be prominent enough to attract attention. This study investigates attention of current in market alcohol warning labels and examines whether attention can be enhanced through theoretically informed design. Attention scores obtained through self-report methods are compared to objective measures (eye-tracking). A multi-method experimental design was used delivering four conditions, namely control, colour, size and colour and size. The first study (n = 559) involved a self-report survey to measure attention. The second study (n = 87) utilized eye-tracking to measure fixation count and duration and time to first fixation. Analysis of Variance (ANOVA) was utilized. Eye-tracking identified that 60% of participants looked at the current in market alcohol warning label while 81% looked at the optimized design (larger and red). In line with observed attention self-reported attention increased for the optimized design. The current study casts doubt on dominant practices (largely self-report), which have been used to evaluate alcohol warning labels. Awareness cannot be used to assess warning label effectiveness in isolation in cases where attention does not occur 100% of the time. Mixed methods permit objective data collection methodologies to be triangulated with surveys to assess warning label effectiveness. Attention should be incorporated as a measure in warning label effectiveness evaluations. Colour and size changes to the existing Australian warning labels aided by theoretically informed design increased attention. © The Author 2017. Medical Council on Alcohol and Oxford University Press. All rights reserved.

Dietary guideline adherence index and kidney measures in the framingham heart study

USDA-ARS?s Scientific Manuscript database

BACKGROUND: No observational studies have directly considered dietary guidelines when examining the prospective association between dietary intake and kidney measures. STUDY DESIGN: Prospective cohort study. SETTING & PARTICIPANTS: We examined participants who attended examinations 7 (1998-2001) a...

Thermal Control Subsystem Design for the Avionics of a Space Station Payload

NASA Technical Reports Server (NTRS)

Moran, Matthew E.

1996-01-01

A case study of the thermal control subsystem development for a space based payload is presented from the concept stage through preliminary design. This payload, the Space Acceleration Measurement System 2 (SAMS-2), will measure the acceleration environment at select locations within the International Space Station. Its thermal control subsystem must maintain component temperatures within an acceptable range over a 10 year life span, while restricting accessible surfaces to touch temperature limits and insuring fail safe conditions in the event of loss of cooling. In addition to these primary design objectives, system level requirements and constraints are imposed on the payload, many of which are driven by multidisciplinary issues. Blending these issues into the overall system design required concurrent design sessions with the project team, iterative conceptual design layouts, thermal analysis and modeling, and hardware testing. Multiple tradeoff studies were also performed to investigate the many options which surfaced during the development cycle.

Parameter Trade Studies For Coherent Lidar Wind Measurements of Wind from Space

NASA Technical Reports Server (NTRS)

Kavaya, Michael J.; Frehlich, Rod G.

2007-01-01

The design of an orbiting wind profiling lidar requires selection of dozens of lidar, measurement scenario, and mission geometry parameters; in addition to prediction of atmospheric parameters. Typical mission designs do not include a thorough trade optimization of all of these parameters. We report here the integration of a recently published parameterization of coherent lidar wind velocity measurement performance with an orbiting coherent wind lidar computer simulation; and the use of these combined tools to perform some preliminary parameter trades. We use the 2006 NASA Global Wind Observing Sounder mission design as the starting point for the trades.

Luminaire layout: Design and implementation

NASA Technical Reports Server (NTRS)

Both, A. J.

1994-01-01

The information contained in this report was presented during the discussion regarding guidelines for PAR uniformity in greenhouses. The data shows a lighting uniformity analysis in a research greenhouse for rose production at the Cornell University campus. The luminaire layout was designed using the computer program Lumen-Micro. After implementation of the design, accurate measurements were taken in the greenhouse and the uniformity analysis for both the design and implementation were compared. A study of several supplemental lighting installations resulted in the following recommendations: include only the actual growing area in the lighting uniformity analysis; for growing areas up to 20 square meters, take four measurements per square meter; for growing areas above 20 square meters, take one measurement per square meter; use one of the uniformity criteria and frequency graphs to compare lighting uniformity amongst designs; and design for uniformity criterion of a least 0.75 and the fraction within +/- 15% of the average PAR value should be close to one.

Measuring Literary Reading Motivation: Questionnaires Design and Pilot Testing

ERIC Educational Resources Information Center

Chrysos, Michail

2017-01-01

This study aims to present the design and pilot testing procedures of the two specific self-report questionnaires were used to measure the two key aspects of reading motivation, self-efficacy and intrinsic motivation in the field of literary (narrative) reading, and the partial factors that jointly shape them. These instruments were outlined in…

Measuring lip force by oral screens Part 2: The importance of screen design, instruction and suction.

PubMed

Wertsén, Madeleine; Stenberg, Manne

2017-10-01

The aim of this study was to find a reliable method for measuring lip force and to find the most important factors that influence the measurements in terms of magnitude and variability. The hypothesis tested was that suction is involved and thus the instruction and the design of the oral screen are of importance when measuring lip force. This is a methodological study in a healthy population. This study was conducted in a general community. The designs of the screens were soft and hard prefabricated screens and 2 semi-individually made with a tube allowing air to pass. The screens and the instructions squeeze or suck were tested on 29 healthy adults, one at a time and on 4 occasions. The test order of the screens was randomized. Data were collected during 4 consecutive days, and the procedure was repeated after 1 month. The participants were 29 healthy adult volunteers. The instruction was an important mean to distinguish between squeezing and sucking. The design of the screen affected the lip force so that it increases in relation to the projected area of the screen. A screen design with a tube allowing air to pass made it possible to avoid suction when squeezing. By measuring with and without allowing air to pass, it was possible to distinguish between suction related and not suction related lip force. The additional screen pressure when sucking was related to the ability to produce a negative intraoral pressure. In conclusion lip force increases in relation to the projected area of the screen, sucking generally increases the measured lip force and the additional screen pressure when sucking is related to the ability to produce a negative intraoral pressure.

A knowledge based search tool for performance measures in health care systems.

PubMed

Beyan, Oya D; Baykal, Nazife

2012-02-01

Performance measurement is vital for improving the health care systems. However, we are still far from having accepted performance measurement models. Researchers and developers are seeking comparable performance indicators. We developed an intelligent search tool to identify appropriate measures for specific requirements by matching diverse care settings. We reviewed the literature and analyzed 229 performance measurement studies published after 2000. These studies are evaluated with an original theoretical framework and stored in the database. A semantic network is designed for representing domain knowledge and supporting reasoning. We have applied knowledge based decision support techniques to cope with uncertainty problems. As a result we designed a tool which simplifies the performance indicator search process and provides most relevant indicators by employing knowledge based systems.

Road Traffic Noise Pollution Analysis for Cernavoda City

NASA Astrophysics Data System (ADS)

Manea, L.; Manea, A.; Florea, D.; Tarulescu, S.

2017-10-01

In the present paper was studied the noise pollution in Cernavodă city. The noise measurements were made for nine intersections from different city areas. Noise measurements were taken for three chosen routes with high population density, heavy traffic, commercial and residential buildings. Average, maximum and minimum values were collected and compared with standards. The impact of road traffic noise on the community depends on various factors such as road location and design, land use planning measures, building design, traffic composition, driver behaviour and the relief. In the study area 9 locations are identified to measure noise level. By using sound level meter noise levels are measured at different peak sessions i.e. morning, afternoon and evening. The presented values were collected for evening rush hour.

The reliability and validity of a designed setup for the assessment of static back extensor force and endurance in older women with and without hyperkyphosis.

PubMed

Roghani, Taybeh; Khalkhali Zavieh, Minoo; Rahimi, Abbas; Talebian, Saeed; Manshadi, Farideh Dehghan; Akbarzadeh Baghban, Alireza; King, Nicole; Katzman, Wendy

2018-01-25

The purpose of this study was to investigate the intra-rater reliability and validity of a designed load cell setup for the measurement of back extensor muscle force and endurance. The study sample included 19 older women with hyperkyphosis, mean age 67.0 ± 5.0 years, and 14 older women without hyperkyphosis, mean age 63.0 ± 6.0 years. Maximum back extensor force and endurance were measured in a sitting position with a designed load cell setup. Tests were performed by the same examiner on two separate days within a 72-hour interval. The intra-rater reliability of the measurements was analyzed using intraclass correlation coefficient (ICC), standard errors of measurement (SEM), and minimal detectable change (MDC). The validity of the setup was determined using Pearson correlation analysis and independent t-test. Using our designed load cell, the values of ICC indicated very high reliability of force measurement (hyperkyphosis group: 0.96, normal group: 0.97) and high reliability of endurance measurement (hyperkyphosis group: 0.82, normal group: 0.89). For all tests, the values of SEM and MDC were low in both groups. A significant correlation between two documented forces (load cell force and target force) and significant differences in the muscle force and endurance among the two groups were found. The measurements of static back muscle force and endurance are reliable and valid with our designed setup in older women with and without hyperkyphosis.

(TUCSON) STUDY DESIGN AND PRELIMINARY EXPOSURE FINDINGS ASSOCIATED WITH THE DEARS

EPA Science Inventory

The Detroit Exposure and Aerosol Research Study (DEARS) is a three-year field monitoring study initiated in 2004 that is designed to measure exposure and describe exposure relationships for air toxics, PM components, PM from specific sources, and criteria pollutants. Detroit, Mic...

A systematic review of interventions to increase the use of standardized outcome measures by rehabilitation professionals.

PubMed

Colquhoun, Heather L; Lamontagne, Marie-Eve; Duncan, Edward As; Fiander, Michelle; Champagne, Catherine; Grimshaw, Jeremy M

2017-03-01

To determine the types and effectiveness of interventions to increase the knowledge about, attitudes towards, and use of standardized outcome measures in rehabilitation professionals. An electronic search using Medline, EMBASE, PsycINFO, CINAHL, Ergonomics Abstracts, Sports Discus. The search is current to February 2016. All study designs testing interventions were included as were all provider and patient types. Two reviewers independently conducted a title and abstract review, followed by a full-text review. Two reviewers independently extracted a priori variables and used consensus for disagreements. Quality assessment was conducted using the Assessment of Quantitative Studies published by the Effective Public Health Practice Group. We identified 11 studies involving at least 1200 providers. Nine of the studies showed improvements in outcome measure use rates but only three of these studies used an experimental or quasi-experimental design. Eight of the studies used an educational approach in the intervention and three used audit and feedback. Poor intervention description and quality of studies limited recommendations. Increased attention to testing interventions focused on known barriers, matched to behavior change techniques, and with stronger designs is warranted.

Assessing the validity of sales self-efficacy: a cautionary tale.

PubMed

Gupta, Nina; Ganster, Daniel C; Kepes, Sven

2013-07-01

We developed a focused, context-specific measure of sales self-efficacy and assessed its incremental validity against the broad Big 5 personality traits with department store salespersons, using (a) both a concurrent and a predictive design and (b) both objective sales measures and supervisory ratings of performance. We found that in the concurrent study, sales self-efficacy predicted objective and subjective measures of job performance more than did the Big 5 measures. Significant differences between the predictability of subjective and objective measures of performance were not observed. Predictive validity coefficients were generally lower than concurrent validity coefficients. The results suggest that there are different dynamics operating in concurrent and predictive designs and between broad and contextualized measures; they highlight the importance of distinguishing between these designs and measures in meta-analyses. The results also point to the value of focused, context-specific personality predictors in selection research. PsycINFO Database Record (c) 2013 APA, all rights reserved.

A Study to Design, Develop, Implement, Evaluate, and Revise Specific, Measurable Performance Objectives to Serve as a Model to Individualize Instruction for Secondary Schools. Final Report.

ERIC Educational Resources Information Center

Wendt, Marilynn S.; Jacobson, Marjory E.

Specific objectives of this two-phase study included: (1) assessment of design of the behavioral objectives in all secondary level courses; (2) construction of criteria for evaluation of the design; (3) testing of objectives against the evaluative criteria and/or the specifications of the curriculum design; and (4) determination of the validity of…

Evaluating the Impact of Physical Activity Apps and Wearables: Interdisciplinary Review

PubMed Central

Rooksby, John; Gray, Cindy M

2018-01-01

Background Although many smartphone apps and wearables have been designed to improve physical activity, their rapidly evolving nature and complexity present challenges for evaluating their impact. Traditional methodologies, such as randomized controlled trials (RCTs), can be slow. To keep pace with rapid technological development, evaluations of mobile health technologies must be efficient. Rapid alternative research designs have been proposed, and efficient in-app data collection methods, including in-device sensors and device-generated logs, are available. Along with effectiveness, it is important to measure engagement (ie, users’ interaction and usage behavior) and acceptability (ie, users’ subjective perceptions and experiences) to help explain how and why apps and wearables work. Objectives This study aimed to (1) explore the extent to which evaluations of physical activity apps and wearables: employ rapid research designs; assess engagement, acceptability, as well as effectiveness; use efficient data collection methods; and (2) describe which dimensions of engagement and acceptability are assessed. Method An interdisciplinary scoping review using 8 databases from health and computing sciences. Included studies measured physical activity, and evaluated physical activity apps or wearables that provided sensor-based feedback. Results were analyzed using descriptive numerical summaries, chi-square testing, and qualitative thematic analysis. Results A total of 1829 abstracts were screened, and 858 articles read in full. Of 111 included studies, 61 (55.0%) were published between 2015 and 2017. Most (55.0%, 61/111) were RCTs, and only 2 studies (1.8%) used rapid research designs: 1 single-case design and 1 multiphase optimization strategy. Other research designs included 23 (22.5%) repeated measures designs, 11 (9.9%) nonrandomized group designs, 10 (9.0%) case studies, and 4 (3.6%) observational studies. Less than one-third of the studies (32.0%, 35/111) investigated effectiveness, engagement, and acceptability together. To measure physical activity, most studies (90.1%, 101/111) employed sensors (either in-device [67.6%, 75/111] or external [23.4%, 26/111]). RCTs were more likely to employ external sensors (accelerometers: P=.005). Studies that assessed engagement (52.3%, 58/111) mostly used device-generated logs (91%, 53/58) to measure the frequency, depth, and length of engagement. Studies that assessed acceptability (57.7%, 64/111) most often used questionnaires (64%, 42/64) and/or qualitative methods (53%, 34/64) to explore appreciation, perceived effectiveness and usefulness, satisfaction, intention to continue use, and social acceptability. Some studies (14.4%, 16/111) assessed dimensions more closely related to usability (ie, burden of sensor wear and use, interface complexity, and perceived technical performance). Conclusions The rapid increase of research into the impact of physical activity apps and wearables means that evaluation guidelines are urgently needed to promote efficiency through the use of rapid research designs, in-device sensors and user-logs to assess effectiveness, engagement, and acceptability. Screening articles was time-consuming because reporting across health and computing sciences lacked standardization. Reporting guidelines are therefore needed to facilitate the synthesis of evidence across disciplines. PMID:29572200

Instructional Design to Measure the Efficacy of Interactive E-Books in a High School Setting

ERIC Educational Resources Information Center

Pabrua Batoon, Maria Victoria; Glasserman Morales, Leonardo David; Yanez Figueroa, Jose Antonio

2018-01-01

This article describes a qualitative research analysis on the implementation of interactive ebooks in high school courses using a case study approach. The subjects of the study included seven professors and 16 freshmen who were surveyed and interviewed with a questionnaire designed according to the Kemp Model of Instructional Design. The study…

Preventing Smoking in Open Public Places in University Campus Settings: A Situational Crime Prevention Approach

ERIC Educational Resources Information Center

Sun, Jing; Prenzler, Tim; Buys, Nicholas; McMeniman, Marilyn

2012-01-01

Purpose: The purpose of the study was to evaluate the effectiveness of interventions using situational crime prevention approaches to reduce the smoking rate in outdoor areas of a university campus. Design/methodology/approach: A prospective intervention design was designed for the study. Surveys and observations were used to measure the impacts…

Another Look at the Relative Impact of Workplace Design on Training Transfer for Supervisory Communication Skills

ERIC Educational Resources Information Center

Hillsman, Terron L.; Kupritz, Virginia W.

2010-01-01

This ethnographic study extends the findings of earlier research that authenticated the impact of workplace design features on newly acquired communication skills back on the job. The qualitative nature of the earlier study, however, limited quantitative measurement of workplace design features that may have an impact on learned skills. This study…

Basic principles of stability.

PubMed

Egan, William; Schofield, Timothy

2009-11-01

An understanding of the principles of degradation, as well as the statistical tools for measuring product stability, is essential to management of product quality. Key to this is management of vaccine potency. Vaccine shelf life is best managed through determination of a minimum potency release requirement, which helps assure adequate potency throughout expiry. Use of statistical tools such a least squares regression analysis should be employed to model potency decay. The use of such tools provides incentive to properly design vaccine stability studies, while holding stability measurements to specification presents a disincentive for collecting valuable data. The laws of kinetics such as Arrhenius behavior help practitioners design effective accelerated stability programs, which can be utilized to manage stability after a process change. Design of stability studies should be carefully considered, with an eye to minimizing the variability of the stability parameter. In the case of measuring the degradation rate, testing at the beginning and the end of the study improves the precision of this estimate. Additional design considerations such as bracketing and matrixing improve the efficiency of stability evaluation of vaccines.

Acoustic Treatment Design Scaling Methods. Volume 1; Overview, Results, and Recommendations

NASA Technical Reports Server (NTRS)

Kraft, R. E.; Yu, J.

1999-01-01

Scale model fan rigs that simulate new generation ultra-high-bypass engines at about 1/5-scale are achieving increased importance as development vehicles for the design of low-noise aircraft engines. Testing at small scale allows the tests to be performed in existing anechoic wind tunnels, which provides an accurate simulation of the important effects of aircraft forward motion on the noise generation. The ability to design, build, and test miniaturized acoustic treatment panels on scale model fan rigs representative of the fullscale engine provides not only a cost-savings, but an opportunity to optimize the treatment by allowing tests of different designs. The primary objective of this study was to develop methods that will allow scale model fan rigs to be successfully used as acoustic treatment design tools. The study focuses on finding methods to extend the upper limit of the frequency range of impedance prediction models and acoustic impedance measurement methods for subscale treatment liner designs, and confirm the predictions by correlation with measured data. This phase of the program had as a goal doubling the upper limit of impedance measurement from 6 kHz to 12 kHz. The program utilizes combined analytical and experimental methods to achieve the objectives.

Study design in medical research: part 2 of a series on the evaluation of scientific publications.

PubMed

Röhrig, Bernd; du Prel, Jean-Baptist; Blettner, Maria

2009-03-01

The scientific value and informativeness of a medical study are determined to a major extent by the study design. Errors in study design cannot be corrected afterwards. Various aspects of study design are discussed in this article. Six essential considerations in the planning and evaluation of medical research studies are presented and discussed in the light of selected scientific articles from the international literature as well as the authors' own scientific expertise with regard to study design. The six main considerations for study design are the question to be answered, the study population, the unit of analysis, the type of study, the measuring technique, and the calculation of sample size. This article is intended to give the reader guidance in evaluating the design of studies in medical research. This should enable the reader to categorize medical studies better and to assess their scientific quality more accurately.

Sketching in Design Journals: An Analysis of Visual Representations in the Product Design Process

ERIC Educational Resources Information Center

Lau, Kimberly; Oehlberg, Lora; Agogino, Alice

2009-01-01

This paper explores the sketching behavior of designers and the role of sketching in the design process. Observations from a descriptive study of sketches provided in design journals, characterized by a protocol measuring sketching activities, are presented. A distinction is made between journals that are entirely tangible and those that contain…

( DETROIT, MI ) STUDY DESIGN AND PRELIMINARY EXPOSURE FINDINGS ASSOCIATED WITH THE DEARS

EPA Science Inventory

The Detroit Exposure and Aerosol Research Study (DEARS) is a three-year field monitoring study initiated in 2004 that is designed to measure exposure and describe exposure relationships for air toxics, PM components, PM from specific sources, and criteria pollutants. Detroit, Mic...

Effects of Various Architectural Parameters on Six Room Acoustical Measures in Auditoria.

NASA Astrophysics Data System (ADS)

Chiang, Wei-Hwa

The effects of architectural parameters on six room acoustical measures were investigated by means of correlation analyses, factor analyses and multiple regression analyses based on data taken in twenty halls. Architectural parameters were used to estimate acoustical measures taken at individual locations within each room as well as the averages and standard deviations of all measured values in the rooms. The six acoustical measures were Early Decay Time (EDT10), Clarity Index (C80), Overall Level (G), Bass Ratio based on Early Decay Time (BR(EDT)), Treble Ratio based on Early Decay Time (TR(EDT)), and Early Inter-aural Cross Correlation (IACC80). A comprehensive method of quantifying various architectural characteristics of rooms was developed to define a large number of architectural parameters that were hypothesized to effect the acoustical measurements made in the rooms. This study quantitatively confirmed many of the principles used in the design of concert halls and auditoria. Three groups of room architectural parameters such as the parameters associated with the depth of diffusing surfaces were significantly correlated with the hall standard deviations of most of the acoustical measures. Significant differences of statistical relations among architectural parameters and receiver specific acoustical measures were found between a group of music halls and a group of lecture halls. For example, architectural parameters such as the relative distance from the receiver to the overhead ceiling increased the percentage of the variance of acoustical measures that was explained by Barron's revised theory from approximately 70% to 80% only when data were taken in the group of music halls. This study revealed the major architectural parameters which have strong relations with individual acoustical measures forming the basis for a more quantitative method for advancing the theoretical design of concert halls and other auditoria. The results of this study provide designers the information to predict acoustical measures in buildings at very early stages of the design process without using computer models or scale models.

40 CFR 24.08 - Selection of appropriate hearing procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... undertake only a RCRA Facility Investigation and/or Corrective Measures Study, which may include monitoring, surveys, testing, information gathering, analyses, and/or studies (including studies designed to develop recommendations for appropriate corrective measures), or (2) To undertake such investigations and/or studies and...

40 CFR 24.08 - Selection of appropriate hearing procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... undertake only a RCRA Facility Investigation and/or Corrective Measures Study, which may include monitoring, surveys, testing, information gathering, analyses, and/or studies (including studies designed to develop recommendations for appropriate corrective measures), or (2) To undertake such investigations and/or studies and...

40 CFR 21.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., architectural, legal, fiscal, or economic investigations or studies; surveys, designs, plans, writings, drawings... one or more applicable standards. This can be determined with reference to design specifications..., alterations, or methods of operation the design specifications of which will provide a measure of treatment or...

40 CFR 21.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., architectural, legal, fiscal, or economic investigations or studies; surveys, designs, plans, writings, drawings... one or more applicable standards. This can be determined with reference to design specifications..., alterations, or methods of operation the design specifications of which will provide a measure of treatment or...

40 CFR 21.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., architectural, legal, fiscal, or economic investigations or studies; surveys, designs, plans, writings, drawings... one or more applicable standards. This can be determined with reference to design specifications..., alterations, or methods of operation the design specifications of which will provide a measure of treatment or...

40 CFR 21.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., architectural, legal, fiscal, or economic investigations or studies; surveys, designs, plans, writings, drawings... one or more applicable standards. This can be determined with reference to design specifications..., alterations, or methods of operation the design specifications of which will provide a measure of treatment or...

40 CFR 21.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., architectural, legal, fiscal, or economic investigations or studies; surveys, designs, plans, writings, drawings... one or more applicable standards. This can be determined with reference to design specifications..., alterations, or methods of operation the design specifications of which will provide a measure of treatment or...

Combining censored and uncensored data in a U-statistic: design and sample size implications for cell therapy research.

PubMed

Moyé, Lemuel A; Lai, Dejian; Jing, Kaiyan; Baraniuk, Mary Sarah; Kwak, Minjung; Penn, Marc S; Wu, Colon O

2011-01-01

The assumptions that anchor large clinical trials are rooted in smaller, Phase II studies. In addition to specifying the target population, intervention delivery, and patient follow-up duration, physician-scientists who design these Phase II studies must select the appropriate response variables (endpoints). However, endpoint measures can be problematic. If the endpoint assesses the change in a continuous measure over time, then the occurrence of an intervening significant clinical event (SCE), such as death, can preclude the follow-up measurement. Finally, the ideal continuous endpoint measurement may be contraindicated in a fraction of the study patients, a change that requires a less precise substitution in this subset of participants.A score function that is based on the U-statistic can address these issues of 1) intercurrent SCE's and 2) response variable ascertainments that use different measurements of different precision. The scoring statistic is easy to apply, clinically relevant, and provides flexibility for the investigators' prospective design decisions. Sample size and power formulations for this statistic are provided as functions of clinical event rates and effect size estimates that are easy for investigators to identify and discuss. Examples are provided from current cardiovascular cell therapy research.

Children's food store, restaurant, and home food environments and their relationship with body mass index: a pilot study.

PubMed

Holsten, Joanna E; Compher, Charlene W

2012-01-01

This pilot research assessed the feasibility and utility of a study designed to examine the relationship between children's BMI and food store, restaurant, and home food environments. Home visits were conducted with sixth-grade children (N = 12). BMI z-scores were calculated with weight and height measurements. Nutrition Environment Measures Surveys evaluated children's food environments. The study protocol involved a feasible time duration, minimal missing data for primary variables, and participant satisfaction. Potential design problems included the homogeneous store environments and low restaurant exposure of the sample recruited from one school, and the adequacy of a single cross-sectional measure of the home environment.

Inflatable Antenna Microwave Radiometer for Soil Moisture Measurement

NASA Technical Reports Server (NTRS)

Bailey, M. C.; Kendall, Bruce M.; Schroeder, Lyle C.; Harrington, Richard F.

1993-01-01

Microwave measurements of soil moisture are not being obtained at the required spatial Earth resolution with current technology. Recently, new novel designs for lightweight reflector systems have been developed using deployable inflatable antenna structures which could enable lightweight real-aperture radiometers. In consideration of this, a study was conducted at the NASA Langley Research Center (LaRC) to determine the feasibility of developing a microwave radiometer system using inflatable reflector antenna technology to obtain high spatial resolution radiometric measurements of soil moisture from low Earth orbit and which could be used with a small and cost effective launch vehicle. The required high resolution with reasonable swath width coupled with the L-band measurement frequency for soil moisture dictated the use of a large (30 meter class) real aperture antenna in conjunction with a pushbroom antenna beam configuration and noise-injection type radiometer designs at 1.4 and 4.3 GHz to produce a 370 kilometer cross-track swath with a 10 kilometer resolution that could be packaged for launch with a Titan 2 class vehicle. This study includes design of the inflatable structure, control analysis, structural and thermal analysis, antenna and feed design, radiometer design, payload packaging, orbital analysis, and electromagnetic losses in the thin membrane inflatable materials.

Assessing the influence of reactor system design criteria on the performance of model colon fermentation units.

PubMed

Moorthy, Arun S; Eberl, Hermann J

2014-04-01

Fermentation reactor systems are a key platform in studying intestinal microflora, specifically with respect to questions surrounding the effects of diet. In this study, we develop computational representations of colon fermentation reactor systems as a way to assess the influence of three design elements (number of reactors, emptying mechanism, and inclusion of microbial immobilization) on three performance measures (total biomass density, biomass composition, and fibre digestion efficiency) using a fractional-factorial experimental design. It was determined that the choice of emptying mechanism showed no effect on any of the performance measures. Additionally, it was determined that none of the design criteria had any measurable effect on reactor performance with respect to biomass composition. It is recommended that model fermentation systems used in the experimenting of dietary effects on intestinal biomass composition be streamlined to only include necessary system design complexities, as the measured performance is not benefited by the addition of microbial immobilization mechanisms or semi-continuous emptying scheme. Additionally, the added complexities significantly increase computational time during simulation experiments. It was also noted that the same factorial experiment could be directly adapted using in vitro colon fermentation systems. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Assisted Vacations for Men with Dementia and Their Caregiving Spouses: Evaluation of Health-Related Effects

ERIC Educational Resources Information Center

Wilz, Gabriele; Fink-Heitz, Margit

2008-01-01

Purpose: In this study, we conducted the first evaluation of assisted vacations for persons with dementia and their caregivers in the field of caregiving research. Design and Methods: We used a quasi-experimental, two-group, repeated measures design with two measuring times (preintervention, 3-month follow-up) to examine whether assisted vacations…

Development and Initial Testing of a Measure of Person-Directed Care

ERIC Educational Resources Information Center

White, Diana L.; Newton-Curtis, Linda; Lyons, Karen S.

2008-01-01

Purpose: The purpose of the study was to empirically test items of a new measure designed to assess person-directed care (PDC) practices in long-term care. Design and Methods: After reviewing the literature, we identified five areas related to PDC: personhood, comfort care, autonomy, knowing the person, and support for relationships. We also…

An inexpensive rhizotron design for two-dimensional, horizontal root growth measurements

Treesearch

Adam H. Wiese; Don E. Riemenschneider; Ronald S., Jr. Zalesny

2005-01-01

We designed, constructed, and tested an observational system that supports two-dimensional, horizontal root growth measurements over time without disturbing aboveground plant growth and without the need for destructive sampling of roots. Our rhizotrons allow for (1) studying relatively greater numbers of plants at any given time than is now possible under traditional...

Meanings for Fraction as Number-Measure by Exploring the Number Line

ERIC Educational Resources Information Center

Psycharis, Giorgos; Latsi, Maria; Kynigos, Chronis

2009-01-01

This paper reports on a case-study design experiment in the domain of fraction as number-measure. We designed and implemented a set of exploratory tasks concerning comparison and ordering of fractions as well as operations with fractions. Two groups of 12-year-old students worked collaboratively using paper and pencil as well as a specially…

The Development of Attention and Response Inhibition in Early Childhood

ERIC Educational Resources Information Center

Bartgis, Jami; Thomas, David G.; Lefler, Elizabeth K.; Hartung, Cynthia M.

2008-01-01

The goal of this study was to examine the development of attention and response inhibition from ages 5 to 7. Forty children (20 5-year-olds and 20 7-year-olds) completed four counterbalanced phases of a continuous performance task. Phase 1 was designed to measure attention without distraction, Phase 2 was designed to measure attention with…

Multiple Measures of Juvenile Drug Court Effectiveness: Results of a Quasi-Experimental Design

ERIC Educational Resources Information Center

Rodriguez, Nancy; Webb, Vincent J.

2004-01-01

Prior studies of juvenile drug courts have been constrained by small samples, inadequate comparison groups, or limited outcome measures. The authors report on a 3-year evaluation that examines the impact of juvenile drug court participation on recidivism and drug use. A quasi-experimental design is used to compare juveniles assigned to drug court…

Variation in Research Designs Used to Test the Effectiveness of Dissemination and Implementation Strategies: A Review.

PubMed

Mazzucca, Stephanie; Tabak, Rachel G; Pilar, Meagan; Ramsey, Alex T; Baumann, Ana A; Kryzer, Emily; Lewis, Ericka M; Padek, Margaret; Powell, Byron J; Brownson, Ross C

2018-01-01

The need for optimal study designs in dissemination and implementation (D&I) research is increasingly recognized. Despite the wide range of study designs available for D&I research, we lack understanding of the types of designs and methodologies that are routinely used in the field. This review assesses the designs and methodologies in recently proposed D&I studies and provides resources to guide design decisions. We reviewed 404 study protocols published in the journal Implementation Science from 2/2006 to 9/2017. Eligible studies tested the efficacy or effectiveness of D&I strategies (i.e., not effectiveness of the underlying clinical or public health intervention); had a comparison by group and/or time; and used ≥1 quantitative measure. Several design elements were extracted: design category (e.g., randomized); design type [e.g., cluster randomized controlled trial (RCT)]; data type (e.g., quantitative); D&I theoretical framework; levels of treatment assignment, intervention, and measurement; and country in which the research was conducted. Each protocol was double-coded, and discrepancies were resolved through discussion. Of the 404 protocols reviewed, 212 (52%) studies tested one or more implementation strategy across 208 manuscripts, therefore meeting inclusion criteria. Of the included studies, 77% utilized randomized designs, primarily cluster RCTs. The use of alternative designs (e.g., stepped wedge) increased over time. Fewer studies were quasi-experimental (17%) or observational (6%). Many study design categories (e.g., controlled pre-post, matched pair cluster design) were represented by only one or two studies. Most articles proposed quantitative and qualitative methods (61%), with the remaining 39% proposing only quantitative. Half of protocols (52%) reported using a theoretical framework to guide the study. The four most frequently reported frameworks were Consolidated Framework for Implementing Research and RE-AIM ( n  = 16 each), followed by Promoting Action on Research Implementation in Health Services and Theoretical Domains Framework ( n  = 12 each). While several novel designs for D&I research have been proposed (e.g., stepped wedge, adaptive designs), the majority of the studies in our sample employed RCT designs. Alternative study designs are increasing in use but may be underutilized for a variety of reasons, including preference of funders or lack of awareness of these designs. Promisingly, the prevalent use of quantitative and qualitative methods together reflects methodological innovation in newer D&I research.

Acoustic Treatment Design Scaling Methods. Volume 3; Test Plans, Hardware, Results, and Evaluation

NASA Technical Reports Server (NTRS)

Yu, J.; Kwan, H. W.; Echternach, D. K.; Kraft, R. E.; Syed, A. A.

1999-01-01

The ability to design, build, and test miniaturized acoustic treatment panels on scale-model fan rigs representative of the full-scale engine provides not only a cost-savings, but an opportunity to optimize the treatment by allowing tests of different designs. To be able to use scale model treatment as a full-scale design tool, it is necessary that the designer be able to reliably translate the scale model design and performance to an equivalent full-scale design. The primary objective of the study presented in this volume of the final report was to conduct laboratory tests to evaluate liner acoustic properties and validate advanced treatment impedance models. These laboratory tests include DC flow resistance measurements, normal incidence impedance measurements, DC flow and impedance measurements in the presence of grazing flow, and in-duct liner attenuation as well as modal measurements. Test panels were fabricated at three different scale factors (i.e., full-scale, half-scale, and one-fifth scale) to support laboratory acoustic testing. The panel configurations include single-degree-of-freedom (SDOF) perforated sandwich panels, SDOF linear (wire mesh) liners, and double-degree-of-freedom (DDOF) linear acoustic panels.

Investigation of Advanced Radar Techniques for Atmospheric Hazard Detection with Airborne Weather Radar

NASA Technical Reports Server (NTRS)

Pazmany, Andrew L.

2014-01-01

In 2013 ProSensing Inc. conducted a study to investigate the hazard detection potential of aircraft weather radars with new measurement capabilities, such as multi-frequency, polarimetric and radiometric modes. Various radar designs and features were evaluated for sensitivity, measurement range and for detecting and quantifying atmospheric hazards in wide range of weather conditions. Projected size, weight, power consumption and cost of the various designs were also considered. Various cloud and precipitation conditions were modeled and used to conduct an analytic evaluation of the design options. This report provides an overview of the study and summarizes the conclusions and recommendations.

An Overview of Demise Calculations, Conceptual Design Studies, and Hydrazine Compatibility Testing for the GPM Core Spacecraft Propellant Tank

NASA Technical Reports Server (NTRS)

Estes, Robert H.; Moore, N. R.

2007-01-01

NASA's Global Precipitation Measurement (GPM) mission is an ongoing Goddard Space Flight Center (GSFC) project whose basic objective is to improve global precipitation measurements. It has been decided that the GPM spacecraft is to be a "design for demise" spacecraft. This requirement resulted in the need for a propellant tank that would also demise or ablate to an appropriate degree upon re-entry. This paper will describe GSFC-performed spacecraft and tankage demise analyses, vendor conceptual design studies, and vendor performed hydrazine compatibility and wettability tests performed on 6061 and 2219 aluminum alloys.

Design of a Phase /Doppler Light-Scattering System for Measurement of Small-Diameter Glass Fibers During Fiberglass Manufacturing

NASA Astrophysics Data System (ADS)

Schaub, Scott A.; Naqwi, Amir A.; Harding, Foster L.

1998-01-01

We present fundamental studies examining the design of a phase /Doppler laser light-scattering system applicable to on-line measurements of small-diameter ( <15 m) fibers during fiberglass manufacturing. We first discuss off-line diameter measurement techniques currently used in the fiberglass industry and outline the limitations and problems associated with these methods. For the phase /Doppler design study we have developed a theoretical computer model for the response of the measurement system to cylindrical fibers, which is based on electromagnetic scattering theory. The model, valid for arbitrary fiber diameters and hardware configurations, generates simulated detector output as a function of time for a finite absorbing, cylindrical fiber oriented perpendicular to the two incident laser beams. Results of experimental measurements are presented, confirming predictions of the theoretical model. Parametric studies have also been conducted using the computer model to identify experimental arrangements that provide linear phase -diameter relationships for small-diameter fibers, within the measurement constraints imposed by the fiberglass production environment. The effect of variations in optical properties of the glass as well as fiber orientation effects are discussed. Through this research we have identified phase /Doppler arrangements that we expect to have future applications in the fiberglass industry for on-line diameter monitoring and process control.

Design of a phase/doppler light-scattering system for measurement of small-diameter glass fibers during fiberglass manufacturing.

PubMed

Schaub, S A; Naqwi, A A; Harding, F L

1998-01-20

We present fundamental studies examining the design of a phase/Doppler laser light-scattering system applicable to on-line measurements of small-diameter (<15 mum) fibers during fiberglass manufacturing. We first discuss off-line diameter measurement techniques currently used in the fiberglass industry and outline the limitations and problems associated with these methods. For the phase/Doppler design study we have developed a theoretical computer model for the response of the measurement system to cylindrical fibers, which is based on electromagnetic scattering theory. The model, valid for arbitrary fiber diameters and hardware configurations, generates simulated detector output as a function of time for a finite absorbing, cylindrical fiber oriented perpendicular to the two incident laser beams. Results of experimental measurements are presented, confirming predictions of the theoretical model. Parametric studies have also been conducted using the computer model to identify experimental arrangements that provide linear phase-diameter relationships for small-diameter fibers, within the measurement constraints imposed by the fiberglass production environment. The effect of variations in optical properties of the glass as well as fiber orientation effects are discussed. Through this research we have identified phase/Doppler arrangements that we expect to have future applications in the fiberglass industry for on-line diameter monitoring and process control.

Error analysis of Dobson spectrophotometer measurements of the total ozone content

NASA Technical Reports Server (NTRS)

Holland, A. C.; Thomas, R. W. L.

1975-01-01

A study of techniques for measuring atmospheric ozone is reported. This study represents the second phase of a program designed to improve techniques for the measurement of atmospheric ozone. This phase of the program studied the sensitivity of Dobson direct sun measurements and the ozone amounts inferred from those measurements to variation in the atmospheric temperature profile. The study used the plane - parallel Monte-Carlo model developed and tested under the initial phase of this program, and a series of standard model atmospheres.

Regulatory Forum opinion piece: New testing paradigms for reproductive and developmental toxicity--the NTP modified one generation study and OECD 443.

PubMed

Foster, Paul M D

2014-12-01

The National Toxicology Program (NTP) has developed a new flexible study design, termed the modified one generation (MOG) reproduction study. The MOG study will encompass measurements of developmental and reproductive toxicity parameters as well as enable the setting of appropriate dose levels for a cancer bioassay through evaluation of target organ toxicity that is based on test article exposure that starts during gestation. This study design is compared and contrasted with the new Organization for Economic Co-operation and Development (OECD) 443 test guideline, the extended one generation reproduction study. The MOG study has a number of advantages, with a focus on F 1 animals, the generation of adequately powered, robust data sets that include both pre and postnatal developmental toxicity information, and the measurement of effects on reproductive structure and function in the same animals. This new study design does not employ the use of internal triggers in the design structure for the use of animals already on test and is also consistent with the principles of the 3R's. © 2014 by The Author(s).

Your Eyes Say "No," but Your Heart Says "Yes": Behavioral and Psychophysiological Indices in Infant Quantitative Processing

ERIC Educational Resources Information Center

Brez, Caitlin C.; Colombo, John

2012-01-01

Behavioral indices (e.g., infant looking) are predominantly used in studies of infant cognition, but psychophysiological measures have been increasingly integrated into common infant paradigms. The current study reports a result in which behavioral measures and physiological measures were both incorporated in a task designed to study infant number…

An Approach to Quantify Workload in a System of Agents

NASA Technical Reports Server (NTRS)

Stocker, Richard; Rungta, Neha; Mercer, Eric; Raimondi, Franco; Holbrook, Jon; Cardoza, Colleen; Goodrich, Michael

2015-01-01

The role of humans in aviation and other domains continues to shift from manual control to automation monitoring. Studies have found that humans are often poorly suited for monitoring roles, and workload can easily spike in off-nominal situations. Current workload measurement tools, like NASA TLX, use human operators to assess their own workload after using a prototype system. Such measures are used late in the design process and can result in ex- pensive alterations when problems are discovered. Our goal in this work is to provide a quantitative workload measure for use early in the design process. We leverage research in human cognition to de ne metrics that can measure workload on belief-desire-intentions based multi-agent systems. These measures can alert designers to potential workload issues early in design. We demonstrate the utility of our approach by characterizing quantitative differences in the workload for a single pilot operations model compared to a traditional two pilot model.

Designing and optimizing a healthcare kiosk for the community.

PubMed

Lyu, Yongqiang; Vincent, Christopher James; Chen, Yu; Shi, Yuanchun; Tang, Yida; Wang, Wenyao; Liu, Wei; Zhang, Shuangshuang; Fang, Ke; Ding, Ji

2015-03-01

Investigating new ways to deliver care, such as the use of self-service kiosks to collect and monitor signs of wellness, supports healthcare efficiency and inclusivity. Self-service kiosks offer this potential, but there is a need for solutions to meet acceptable standards, e.g. provision of accurate measurements. This study investigates the design and optimization of a prototype healthcare kiosk to collect vital signs measures. The design problem was decomposed, formalized, focused and used to generate multiple solutions. Systematic implementation and evaluation allowed for the optimization of measurement accuracy, first for individuals and then for a population. The optimized solution was tested independently to check the suitability of the methods, and quality of the solution. The process resulted in a reduction of measurement noise and an optimal fit, in terms of the positioning of measurement devices. This guaranteed the accuracy of the solution and provides a general methodology for similar design problems. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Goal-Orientated Group Intervention for Children with Developmental Coordination Disorder

ERIC Educational Resources Information Center

Dunford, Carolyn

2011-01-01

This study measures the effectiveness of a goal-orientated group intervention using concentrated practice schedules for children with developmental coordination disorder (DCD). The study design is repeated measures. The sample comprises eight children with DCD, aged 7-11 years. Outcome measures are the Movement Assessment Battery for Children…

Reducing Bias and Increasing Precision by Adding Either a Pretest Measure of the Study Outcome or a Nonequivalent Comparison Group to the Basic Regression Discontinuity Design: An Example from Education

ERIC Educational Resources Information Center

Tang, Yang; Cook, Thomas D.; Kisbu-Sakarya, Yasemin

2015-01-01

Regression discontinuity design (RD) has been widely used to produce reliable causal estimates. Researchers have validated the accuracy of RD design using within study comparisons (Cook, Shadish & Wong, 2008; Cook & Steiner, 2010; Shadish et al, 2011). Within study comparisons examines the validity of a quasi-experiment by comparing its…

AHP based Anthropometric Analysis of University Hall Bed Design in Bangladesh

NASA Astrophysics Data System (ADS)

Halder, Pobitra; Sarker, Eity; Karmaker, Chitralekha

2018-05-01

In university hall, different types of bed are used for providing sleeping environment to the students. Although there are wide variations in the design of students' bed in Bangladeshi university hall, none of them are designed properly considering the anthropometric data. In this study, four anthropometric measurements related to normal students' bed dimensions were measured from 300 students from a public university hall in Bangladesh. The feedbacks regarding different health problems and their reasons were collected from considering practical situations of the students and gathering experts' opinions. Chi-square test showed that back pain, blood circulation problem, fatigue, comfort, and sleeping problem are related to students' anthropometric measurements. The analytic hierarchy process (AHP) analysis identified students' bed length as the most responsible attribute for ergonomic problems of the students. Finally, the linear regression and correlation analysis suggested the bed dimensions based on stature of the students. This study can be a helpful guideline for industrial engineers and manufacturers in designing more comfortable students' bed.

Denoising Sparse Images from GRAPPA using the Nullspace Method (DESIGN)

PubMed Central

Weller, Daniel S.; Polimeni, Jonathan R.; Grady, Leo; Wald, Lawrence L.; Adalsteinsson, Elfar; Goyal, Vivek K

2011-01-01

To accelerate magnetic resonance imaging using uniformly undersampled (nonrandom) parallel imaging beyond what is achievable with GRAPPA alone, the Denoising of Sparse Images from GRAPPA using the Nullspace method (DESIGN) is developed. The trade-off between denoising and smoothing the GRAPPA solution is studied for different levels of acceleration. Several brain images reconstructed from uniformly undersampled k-space data using DESIGN are compared against reconstructions using existing methods in terms of difference images (a qualitative measure), PSNR, and noise amplification (g-factors) as measured using the pseudo-multiple replica method. Effects of smoothing, including contrast loss, are studied in synthetic phantom data. In the experiments presented, the contrast loss and spatial resolution are competitive with existing methods. Results for several brain images demonstrate significant improvements over GRAPPA at high acceleration factors in denoising performance with limited blurring or smoothing artifacts. In addition, the measured g-factors suggest that DESIGN mitigates noise amplification better than both GRAPPA and L1 SPIR-iT (the latter limited here by uniform undersampling). PMID:22213069

Set membership experimental design for biological systems.

PubMed

Marvel, Skylar W; Williams, Cranos M

2012-03-21

Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. The practicability of our approach is illustrated with a case study. This study shows that our approach is able to 1) identify candidate measurement time points that maximize information corresponding to biologically relevant metrics and 2) determine the number at which additional measurements begin to provide insignificant information. This framework can be used to balance the availability of resources with the addition of one or more measurement time points to improve the predictability of resulting models.

Set membership experimental design for biological systems

PubMed Central

2012-01-01

Background Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. Results In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. Conclusions The practicability of our approach is illustrated with a case study. This study shows that our approach is able to 1) identify candidate measurement time points that maximize information corresponding to biologically relevant metrics and 2) determine the number at which additional measurements begin to provide insignificant information. This framework can be used to balance the availability of resources with the addition of one or more measurement time points to improve the predictability of resulting models. PMID:22436240

76 FR 24497 - New Proposed Collection; Comment Request; Neuropsychosocial Measures Formative Research...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

.... The NCS has obtained an OMB generic clearance to conduct survey and instrument design and... NCS was designed to include a preliminary pilot study known as the Vanguard Study. The purpose of the... multiple methodological studies conducted during the Vanguard phase will inform the implementation and...

Engineering Design Activity: Understanding How Different Design Activities Influence Students' Motivation in Grades 9-12. Final Report. A Seed Grant Research Project. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Lawanto, Oenardi; Stewardson, Gary

2009-01-01

The objective of this study was to evaluate grade 9-12 students' motivation while engaged in two different engineering design projects: marble-sorter and bridge designs. The motivation components measured in this study were focused on students' intrinsic (IGO) and extrinsic (EGO) goal orientations, task value (TV), self-efficacy for learning and…

Measuring safety climate in health care.

PubMed

Flin, R; Burns, C; Mearns, K; Yule, S; Robertson, E M

2006-04-01

To review quantitative studies of safety climate in health care to examine the psychometric properties of the questionnaires designed to measure this construct. A systematic literature review was undertaken to study sample and questionnaire design characteristics (source, no of items, scale type), construct validity (content validity, factor structure and internal reliability, concurrent validity), within group agreement, and level of analysis. Twelve studies were examined. There was a lack of explicit theoretical underpinning for most questionnaires and some instruments did not report standard psychometric criteria. Where this information was available, several questionnaires appeared to have limitations. More consideration should be given to psychometric factors in the design of healthcare safety climate instruments, especially as these are beginning to be used in large scale surveys across healthcare organisations.

A Remote Monitoring System for Voltage, Current, Power and Temperature Measurements

NASA Astrophysics Data System (ADS)

Barakat, E.; Sinno, N.; Keyrouz, C.

This paper presents a study and design of a monitoring system for the continuous measurement of electrical energy parameters such as voltage, current, power and temperature. This system is designed to monitor the data remotely over internet. The electronic power meter is based on a microcontroller from Microchip Technology Inc. PIC family. The design takes into consideration the correct operation in the event of an outage or brown out by recording the electrical values and the temperatures in EEPROM internally available in the microcontroller. Also a digital display is used to show the acquired measurements. A computer will remotely monitor the data over internet.

Phased-array-fed antenna configuration study, volume 2

NASA Technical Reports Server (NTRS)

Sorbello, R. M.; Zaghloul, A. I.; Lee, B. S.; Siddiqi, S.; Geller, B. D.

1983-01-01

Increased capacity in future satellite systems can be achieved through antenna systems which provide multiplicity of frequency reuses at K sub a band. A number of antenna configurations which can provide multiple fixed spot beams and multiple independent spot scanning beams at 20 GHz are addressed. Each design incorporates a phased array with distributed MMIC amplifiers and phasesifters feeding a two reflector optical system. The tradeoffs required for the design of these systems and the corresponding performances are presented. Five final designs are studied. In so doing, a type of MMIC/waveguide transition is described, and measured results of the breadboard model are presented. Other hardware components developed are described. This includes a square orthomode transducer, a subarray fed with a beamforming network to measure scanning performance, and another subarray used to study mutual coupling considerations. Discussions of the advantages and disadvantages of the final design are included.

Effects of School Design on Student Outcomes

ERIC Educational Resources Information Center

Tanner, C. Kenneth

2009-01-01

Purpose: The purpose of this study is to compare student achievement with three school design classifications: movement and circulation, day lighting, and views. Design/methodology/approach: From a sample of 71 schools, measures of these three school designs, taken with a ten-point Likert scale, are compared to students' outcomes defined by six…

Novel experimental design for high pressure-high temperature electrical resistance measurements in a "Paris-Edinburgh" large volume press.

PubMed

Matityahu, Shlomi; Emuna, Moran; Yahel, Eyal; Makov, Guy; Greenberg, Yaron

2015-04-01

We present a novel experimental design for high sensitivity measurements of the electrical resistance of samples at high pressures (0-6 GPa) and high temperatures (300-1000 K) in a "Paris-Edinburgh" type large volume press. Uniquely, the electrical measurements are carried out directly on a small sample, thus greatly increasing the sensitivity of the measurement. The sensitivity to even minor changes in electrical resistance can be used to clearly identify phase transitions in material samples. Electrical resistance measurements are relatively simple and rapid to execute and the efficacy of the present experimental design is demonstrated by measuring the electrical resistance of Pb, Sn, and Bi across a wide domain of temperature-pressure phase space and employing it to identify the loci of phase transitions. Based on these results, the phase diagrams of these elements are reconstructed to high accuracy and found to be in excellent agreement with previous studies. In particular, by mapping the locations of several well-studied reference points in the phase diagram of Sn and Bi, it is demonstrated that a standard calibration exists for the temperature and pressure, thus eliminating the need for direct or indirect temperature and pressure measurements. The present technique will allow simple and accurate mapping of phase diagrams under extreme conditions and may be of particular importance in advancing studies of liquid state anomalies.

Maximum likelihood estimation of correction for dilution bias in simple linear regression using replicates from subjects with extreme first measurements.

PubMed

Berglund, Lars; Garmo, Hans; Lindbäck, Johan; Svärdsudd, Kurt; Zethelius, Björn

2008-09-30

The least-squares estimator of the slope in a simple linear regression model is biased towards zero when the predictor is measured with random error. A corrected slope may be estimated by adding data from a reliability study, which comprises a subset of subjects from the main study. The precision of this corrected slope depends on the design of the reliability study and estimator choice. Previous work has assumed that the reliability study constitutes a random sample from the main study. A more efficient design is to use subjects with extreme values on their first measurement. Previously, we published a variance formula for the corrected slope, when the correction factor is the slope in the regression of the second measurement on the first. In this paper we show that both designs improve by maximum likelihood estimation (MLE). The precision gain is explained by the inclusion of data from all subjects for estimation of the predictor's variance and by the use of the second measurement for estimation of the covariance between response and predictor. The gain of MLE enhances with stronger true relationship between response and predictor and with lower precision in the predictor measurements. We present a real data example on the relationship between fasting insulin, a surrogate marker, and true insulin sensitivity measured by a gold-standard euglycaemic insulin clamp, and simulations, where the behavior of profile-likelihood-based confidence intervals is examined. MLE was shown to be a robust estimator for non-normal distributions and efficient for small sample situations. Copyright (c) 2008 John Wiley & Sons, Ltd.

A standardized mean difference effect size for multiple baseline designs across individuals.

PubMed

Hedges, Larry V; Pustejovsky, James E; Shadish, William R

2013-12-01

Single-case designs are a class of research methods for evaluating treatment effects by measuring outcomes repeatedly over time while systematically introducing different condition (e.g., treatment and control) to the same individual. The designs are used across fields such as behavior analysis, clinical psychology, special education, and medicine. Emerging standards for single-case designs have focused attention on methods for summarizing and meta-analyzing findings and on the need for effect sizes indices that are comparable to those used in between-subjects designs. In the previous work, we discussed how to define and estimate an effect size that is directly comparable to the standardized mean difference often used in between-subjects research based on the data from a particular type of single-case design, the treatment reversal or (AB)(k) design. This paper extends the effect size measure to another type of single-case study, the multiple baseline design. We propose estimation methods for the effect size and its variance, study the estimators using simulation, and demonstrate the approach in two applications. Copyright © 2013 John Wiley & Sons, Ltd.

Design of a 32-Channel EEG System for Brain Control Interface Applications

PubMed Central

Wang, Ching-Sung

2012-01-01

This study integrates the hardware circuit design and the development support of the software interface to achieve a 32-channel EEG system for BCI applications. Since the EEG signals of human bodies are generally very weak, in addition to preventing noise interference, it also requires avoiding the waveform distortion as well as waveform offset and so on; therefore, the design of a preamplifier with high common-mode rejection ratio and high signal-to-noise ratio is very important. Moreover, the friction between the electrode pads and the skin as well as the design of dual power supply will generate DC bias which affects the measurement signals. For this reason, this study specially designs an improved single-power AC-coupled circuit, which effectively reduces the DC bias and improves the error caused by the effects of part errors. At the same time, the digital way is applied to design the adjustable amplification and filter function, which can design for different EEG frequency bands. For the analog circuit, a frequency band will be taken out through the filtering circuit and then the digital filtering design will be used to adjust the extracted frequency band for the target frequency band, combining with MATLAB to design man-machine interface for displaying brain wave. Finally the measured signals are compared to the traditional 32-channel EEG signals. In addition to meeting the IFCN standards, the system design also conducted measurement verification in the standard EEG isolation room in order to demonstrate the accuracy and reliability of this system design. PMID:22778545

Design of a 32-channel EEG system for brain control interface applications.

PubMed

Wang, Ching-Sung

2012-01-01

This study integrates the hardware circuit design and the development support of the software interface to achieve a 32-channel EEG system for BCI applications. Since the EEG signals of human bodies are generally very weak, in addition to preventing noise interference, it also requires avoiding the waveform distortion as well as waveform offset and so on; therefore, the design of a preamplifier with high common-mode rejection ratio and high signal-to-noise ratio is very important. Moreover, the friction between the electrode pads and the skin as well as the design of dual power supply will generate DC bias which affects the measurement signals. For this reason, this study specially designs an improved single-power AC-coupled circuit, which effectively reduces the DC bias and improves the error caused by the effects of part errors. At the same time, the digital way is applied to design the adjustable amplification and filter function, which can design for different EEG frequency bands. For the analog circuit, a frequency band will be taken out through the filtering circuit and then the digital filtering design will be used to adjust the extracted frequency band for the target frequency band, combining with MATLAB to design man-machine interface for displaying brain wave. Finally the measured signals are compared to the traditional 32-channel EEG signals. In addition to meeting the IFCN standards, the system design also conducted measurement verification in the standard EEG isolation room in order to demonstrate the accuracy and reliability of this system design.

Comparison of female foot morphology and last design in athletic footwear--are men's lasts appropriate for women?

PubMed

Krauss, Inga; Valiant, Gordon; Horstmann, Thomas; Grau, Stefan

2010-04-01

The purpose of this study was to investigate differences between female feet and last design. Four hundred twenty-four feet and four men's running shoe lasts (U.S. women 6.0-9.5), which also are used for the manufacturing of women's shoes, were scanned in three dimensions. Six foot measures were quantified. Different foot types were classified using a cluster analysis. Comparisons were made between last measures and averaged as well as foot type specific foot measures. Differences in width measures between lasts and foot types vary substantially (0-9 mm). Length grading is similar for lasts and feet (differences < 1mm). Width grading is larger in lasts in comparison with average grading in feet (3.5-5.9 mm). Last design and grading should account for the sex-specific allometry in foot measures. The use of down-graded men's lasts for women's shoes has to be questioned. Therefore, sex-specific reference measures and wear tests should incorporate different foot types in different sizes to allow suitable implications for a proper design and grading of lasts.

Three-Dimensional Measurement Applied in Design Eye Point of Aircraft Cockpits.

PubMed

Wang, Yanyan; Guo, Xiaochao; Liu, Qingfeng; Xiao, Huajun; Bai, Yu

2018-04-01

Inappropriate design eye point (DEP) will lead to nonstandard sitting postures, including nonneutral head positions and other uncomfortable sitting postures, which are high risk factors for neck pain in fighter pilots exposed to high G forces. Therefore, application of a 3D measurement method to collect data regarding eye position while in the cruising sitting posture in the aircraft cockpit to guide the design eye point has been proposed. A total of 304 male fixed wing aircraft pilots were divided into two groups. Subgroup A (N = 48) were studied to define the cruising posture during flight. Subgroup B (N = 256) were studied with Romer 3D measurement equipment to locate the cruising eye position of the pilots in a simulated cockpit. The 3D data were compared to DEP data in the current standard cockpit. According to 3D measurement, the vertical distance from the cruising eye point to the neutral seat reference point was 759 mm, which is 36 mm lower than that of the Chinese standard DEP and also lower than the U.S. military standard. The horizontal distance was 131 mm, which is 24 mm shorter than that of the Chinese standard. The current DEP data cannot fulfill the needs of fighter pilots and should be amended according to the results of the 3D measurement so that pilots can acquire the optimal cruising posture in flight. This new method has the value of practical application to investigate cockpit ergonomics and the measurement data can guide DEP design.Wang Y, Guo X, Liu Q, Xiao H, Bai Y. Three-dimensional measurement applied in design eye point of aircraft cockpits. Aerosp Med Hum Perform. 2018; 89(4):371-376.

The International Design Study for the Neutrino Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, K.

2008-02-21

The International Design Study for a future Neutrino Factory and super-beam facility (the ISS) established the physics case for a high-precision programme of long-baseline neutrino-oscillation measurements. The ISS also identified baseline specifications for the Neutrino Factory accelerator complex and the neutrino detector systems. This paper summarises the objectives of the International Design Study for the Neutrino Factory (the IDS-NF). The IDS-NF will build on the work of the ISS to deliver a Reference Design Report for the Neutrino Factory by 2012/13 and an Interim Design Report by 2010/11.

Democratizing science with the aid of parametric design and additive manufacturing: Design and fabrication of a versatile and low-cost optical instrument for scattering measurement.

PubMed

Nadal-Serrano, Jose M; Nadal-Serrano, Adolfo; Lopez-Vallejo, Marisa

2017-01-01

This paper focuses on the application of rapid prototyping techniques using additive manufacturing in combination with parametric design to create low-cost, yet accurate and reliable instruments. The methodology followed makes it possible to make instruments with a degree of customization until now available only to a narrow audience, helping democratize science. The proposal discusses a holistic design-for-manufacturing approach that comprises advanced modeling techniques, open-source design strategies, and an optimization algorithm using free parametric software for both professional and educational purposes. The design and fabrication of an instrument for scattering measurement is used as a case of study to present the previous concepts.

Democratizing science with the aid of parametric design and additive manufacturing: Design and fabrication of a versatile and low-cost optical instrument for scattering measurement

PubMed Central

Lopez-Vallejo, Marisa

2017-01-01

This paper focuses on the application of rapid prototyping techniques using additive manufacturing in combination with parametric design to create low-cost, yet accurate and reliable instruments. The methodology followed makes it possible to make instruments with a degree of customization until now available only to a narrow audience, helping democratize science. The proposal discusses a holistic design-for-manufacturing approach that comprises advanced modeling techniques, open-source design strategies, and an optimization algorithm using free parametric software for both professional and educational purposes. The design and fabrication of an instrument for scattering measurement is used as a case of study to present the previous concepts. PMID:29112987

Optimum study designs.

PubMed

Gu, C; Rao, D C

2001-01-01

Because simplistic designs will lead to prohibitively large sample sizes, the optimization of genetic study designs is critical for successfully mapping genes for complex diseases. Creative designs are necessary for detecting and amplifying the usually weak signals for complex traits. Two important outcomes of a study design--power and resolution--are implicitly tied together by the principle of uncertainty. Overemphasis on either one may lead to suboptimal designs. To achieve optimality for a particular study, therefore, practical measures such as cost-effectiveness must be used to strike a balance between power and resolution. In this light, the myriad of factors involved in study design can be checked for their effects on the ultimate outcomes, and the popular existing designs can be sorted into building blocks that may be useful for particular situations. It is hoped that imaginative construction of novel designs using such building blocks will lead to enhanced efficiency in finding genes for complex human traits.

Operationalizing System Importance Measures for Assessing System of System Resilience

NASA Astrophysics Data System (ADS)

Chandrahasa, Rakshit

In recent times, there has been a shift in focus from component level to system level analysis and an increasing effort to understand and design resilience into the system. Several efforts have been carried out in creating metrics to analyse resilience. Understanding and implementing system resilience in complex System of Systems will help us in building safer and resilient systems. System Importance Measures (SIMs) was formulated to analyse System of System resilience and help in designing a resilient SoS. Here, we operationalize these System Importance Measures for designing a resilient SoS. We first look at the existing methodology to improve the visual representation of system resilience and its usability. We demonstrate this using our first case study with a Naval warfare SoS. We incorporate probability into the SIM formulation. We expand the existing SIMs to quantify the effects of disruptions and mitigation likelihoods. We built a second case study based on Air transportation networks and demonstrated our expanded metrics in both the case studies. SIM based analysis of SoS resilience provides us with two different analysis of resilience, with and without probability. Having an outlook on how the resilience changes with a probability of disruptions can aid the designer making informed choices on design changes and help in creating a resilient SoS.

Systematic review of the quality of prognosis studies in systemic lupus erythematosus.

PubMed

Lim, Lily S H; Lee, Senq J; Feldman, Brian M; Gladman, Dafna D; Pullenayegum, Eleanor; Uleryk, Elizabeth; Silverman, Earl D

2014-10-01

Prognosis studies examine outcomes and/or seek to identify predictors or factors associated with outcomes. Many prognostic factors have been identified in systemic lupus erythematosus (SLE), but few have been consistently found across studies. We hypothesized that this is due to a lack of rigor of study designs. This study aimed to systematically assess the methodologic quality of prognosis studies in SLE. A search of prognosis studies in SLE was performed using MEDLINE and Embase, from January 1990 to June 2011. A representative sample of 150 articles was selected using a random number generator and assessed by 2 reviewers. Each study was assessed by a risk of bias tool according to 6 domains: study participation, study attrition, measurement of prognostic factors, measurement of outcomes, measurement/adjustment for confounders, and appropriateness of statistical analysis. Information about missing data was also collected. A cohort design was used in 71% of studies. High risk of bias was found in 65% of studies for confounders, 57% for study participation, 56% for attrition, 36% for statistical analyses, 20% for prognostic factors, and 18% for outcome. Missing covariate or outcome information was present in half of the studies. Only 6 studies discussed reasons for missing data and 2 imputed missing data. Lack of rigorous study design, especially in addressing confounding, study participation and attrition, and inadequately handled missing data, has limited the quality of prognosis studies in SLE. Future prognosis studies should be designed with consideration of these factors to improve methodologic rigor. Copyright © 2014 by the American College of Rheumatology.

Active-comparator design and new-user design in observational studies

PubMed Central

Yoshida, Kazuki; Solomon, Daniel H.; Kim, Seoyoung C.

2015-01-01

SUMMARY Over the past decade, an increasing number of observational studies have examined the effectiveness or safety of rheumatoid arthritis treatments. However, unlike randomized controlled trials (RCTs), observational studies of drug effects face methodological challenges including confounding by indication. Two design principles - active comparator design and new user design can help mitigate such challenges in observational studies. To improve validity of study findings, observational studies should be designed in such a way that makes them more closely approximate RCTs. The active comparator design compares the drug of interest to another commonly used agent for the same indication, rather than a ‘non-user’ group. This principle helps select treatment groups similar in treatment indications (both measured and unmeasured characteristics). The new user design includes a cohort of patients from the time of treatment initiation, so that it can assess patients’ pretreatment characteristics and capture all events occurring anytime during follow-up. PMID:25800216

User Interaction in Semi-Automatic Segmentation of Organs at Risk: a Case Study in Radiotherapy.

PubMed

Ramkumar, Anjana; Dolz, Jose; Kirisli, Hortense A; Adebahr, Sonja; Schimek-Jasch, Tanja; Nestle, Ursula; Massoptier, Laurent; Varga, Edit; Stappers, Pieter Jan; Niessen, Wiro J; Song, Yu

2016-04-01

Accurate segmentation of organs at risk is an important step in radiotherapy planning. Manual segmentation being a tedious procedure and prone to inter- and intra-observer variability, there is a growing interest in automated segmentation methods. However, automatic methods frequently fail to provide satisfactory result, and post-processing corrections are often needed. Semi-automatic segmentation methods are designed to overcome these problems by combining physicians' expertise and computers' potential. This study evaluates two semi-automatic segmentation methods with different types of user interactions, named the "strokes" and the "contour", to provide insights into the role and impact of human-computer interaction. Two physicians participated in the experiment. In total, 42 case studies were carried out on five different types of organs at risk. For each case study, both the human-computer interaction process and quality of the segmentation results were measured subjectively and objectively. Furthermore, different measures of the process and the results were correlated. A total of 36 quantifiable and ten non-quantifiable correlations were identified for each type of interaction. Among those pairs of measures, 20 of the contour method and 22 of the strokes method were strongly or moderately correlated, either directly or inversely. Based on those correlated measures, it is concluded that: (1) in the design of semi-automatic segmentation methods, user interactions need to be less cognitively challenging; (2) based on the observed workflows and preferences of physicians, there is a need for flexibility in the interface design; (3) the correlated measures provide insights that can be used in improving user interaction design.

The 2-8 GHz solar dynamic spectra and polarization measurement feasibility study

NASA Technical Reports Server (NTRS)

Haddock, F. T.

1971-01-01

The preliminary system design of a Solar Microwave Spectrograph (SMS) is presented. This design resulted from a study to determine the feasibility of measuring solar polarization and dynamic spectra over the range of two to eight GHz, using broadband radio frequency instrumentation and rapid recording equipment in conjunction with radio telescopes. The scientific value of the proposed SMS instrument is discussed, with remarks concerning data reduction and analysis and a presentation of the engineering plan to implement the SMS system.

Acoustic Treatment Design Scaling Methods. Volume 5; Analytical and Experimental Data Correlation

NASA Technical Reports Server (NTRS)

Chien, W. E.; Kraft, R. E.; Syed, A. A.

1999-01-01

The primary purpose of the study presented in this volume is to present the results and data analysis of in-duct transmission loss measurements. Transmission loss testing was performed on full-scale, 1/2-scale, and 115-scale treatment panel samples. The objective of the study was to compare predicted and measured transmission loss for full-scale and subscale panels in an attempt to evaluate the variations in suppression between full- and subscale panels which were ostensibly of equivalent design. Generally, the results indicated an unsatisfactory agreement between measurement and prediction, even for full-scale. This was attributable to difficulties encountered in obtaining sufficiently accurate test results, even with extraordinary care in calibrating the instrumentation and performing the test. Test difficulties precluded the ability to make measurements at frequencies high enough to be representative of subscale liners. It is concluded that transmission loss measurements without ducts and data acquisition facilities specifically designed to operate with the precision and complexity required for high subscale frequency ranges are inadequate for evaluation of subscale treatment effects.

Congruency of scapula locking plates: implications for implant design.

PubMed

Park, Andrew Y; DiStefano, James G; Nguyen, Thuc-Quyen; Buckley, Jenni M; Montgomery, William H; Grimsrud, Chris D

2012-04-01

We conducted a study to evaluate the congruency of fit of current scapular plate designs. Three-dimensional image-processing and -analysis software, and computed tomography scans of 12 cadaveric scapulae were used to generate 3 measurements: mean distance from plate to bone, maximum distance, and percentage of plate surface within 2 mm of bone. These measurements were used to quantify congruency. The scapular spine plate had the most congruent fit in all 3 measured variables. The lateral border and glenoid plates performed statistically as well as the scapular spine plate in at least 1 of the measured variables. The medial border plate had the least optimal measurements in all 3 variables. With locking-plate technology used in a wide variety of anatomical locations, the locking scapula plate system can allow for a fixed-angle construct in this region. Our study results showed that the scapular spine, glenoid, and lateral border plates are adequate in terms of congruency. However, design improvements may be necessary for the medial border plate. In addition, we describe a novel method for quantifying hardware congruency, a method that can be applied to any anatomical location.

21st Century Cognitive Behavioural Therapy for Anger: A Systematic Review of Research Design, Methodology and Outcome.

PubMed

Fernandez, Ephrem; Malvaso, Catia; Day, Andrew; Guharajan, Deepan

2018-07-01

Past reviews of cognitive behavioural therapy (CBT) for anger have focused on outcome in specific subpopulations, with few questions posed about research design and methodology. Since the turn of the century, there has been a surge of methodologically varied studies awaiting systematic review. The basic aim was to review this recent literature in terms of trends and patterns in research design, operationalization of anger, and covariates such as social desirability bias (SDB). Also of interest was clinical outcome. After successive culling, 42 relevant studies were retained. These were subjected to a rapid evidence assessment (REA) with special attention to design (ranked on the Scientific Methods Scale) measurement methodology (self-monitored behaviour, anger questionnaires, and others' ratings), SDB assessment, and statistical versus clinical significance. The randomized controlled trial characterized 60% of the studies, and the State Trait Anger Expression Inventory was the dominant measure of anger. All but one of the studies reported statistically significant outcome, and all but one of the 21 studies evaluating clinical significance laid claim to it. The one study with neither statistical nor clinical significance was the only one that had assessed and corrected for SDB. Measures remain relatively narrow in scope, but study designs have improved, and the outcomes suggest efficacy and clinical effectiveness. In conjunction with previous findings of an inverse relationship between anger and SDB, the results raise the possibility that the favourable picture of CBT for anger may need closer scrutiny with SDB and other methodological details in mind.

Developing Content Knowledge for Teaching Assessments for the Measures of Effective Teaching Study. Research Report. ETS RR-14-33

ERIC Educational Resources Information Center

Phelps, Geoffrey; Weren, Barbara; Croft, Andrew; Gitomer, Drew

2014-01-01

This report documents the development of assessments of content knowledge for teaching (CKT) as part of the Measures of Effective Teaching (MET) study, funded by the Bill and Melinda Gates Foundation.The MET study was designed to develop a set of measures that together serve as an accurate indicator of teaching effectiveness. The study was…

Design of micro bending deformer for optical fiber weight sensor

NASA Astrophysics Data System (ADS)

Ula, R. K.; Hanto, D.; Waluyo, T. B.; Adinanta, H.; Widiyatmoko, B.

2017-04-01

The road damage due to excessive load is one of the causes of accidents on the road. A device to measure weight of the passing vehicles needs to be planted in the road structure. Thus, a weight sensor for the passing vehicles is required. In this study, we designed a weight sensor for a static load based on a power loss due to a micro bending on the optical fiber flanked on a board. The following main components are used i.e. LED 1310 nm as a light source, a multimode fiber optic as a transmission media and a power meter for measuring power loss. This works focuses on obtaining a suitable deformer design for weight sensor. Experimental results show that deformer design with 1.5 mm single side has level of accuracy as 4.32% while the design with 1.5 mm double side has level of accuracy as 98.77%. Increasing deformer length to 2.5 mm gives 71.18% level of accuracy for single side, and 76.94% level of accuracy for double side. Micro bending design with 1.5 mm double side has a high sensitivity and it is also capable of measuring load up to 100 kg. The sensor designed has been tested for measuring the weight of motor cycle, and it can be upgraded for measuring heavy vehicles.

Impact of Molecular Diagnostics for Tuberculosis on Patient-Important Outcomes: A Systematic Review of Study Methodologies

PubMed Central

Schumacher, Samuel G.; Sohn, Hojoon; Qin, Zhi Zhen; Gore, Genevieve; Davis, J. Lucian; Denkinger, Claudia M.; Pai, Madhukar

2016-01-01

Background Several reviews on the accuracy of Tuberculosis (TB) Nucleic Acid Amplification Tests (NAATs) have been performed but the evidence on their impact on patient-important outcomes has not been systematically reviewed. Given the recent increase in research evaluating such outcomes and the growing list of TB NAATs that will reach the market over the coming years, there is a need to bring together the existing evidence on impact, rather than accuracy. We aimed to assess the approaches that have been employed to measure the impact of TB NAATs on patient-important outcomes in adults with possible pulmonary TB and/or drug-resistant TB. Methods We first develop a conceptual framework to clarify through which mechanisms the improved technical performance of a novel TB test may lead to improved patient outcomes and outline which designs may be used to measure them. We then systematically review the literature on studies attempting to assess the impact of molecular TB diagnostics on such outcomes and provide a narrative synthesis of designs used, outcomes assessed and risk of bias across different study designs. Results We found 25 eligible studies that assessed a wide range of outcomes and utilized a variety of experimental and observational study designs. Many potentially strong design options have never been used. We found that much of the available evidence on patient-important outcomes comes from a small number of settings with particular epidemiological and operational context and that confounding, time trends and incomplete outcome data receive insufficient attention. Conclusions A broader range of designs should be considered when designing studies to assess the impact of TB diagnostics on patient outcomes and more attention needs to be paid to the analysis as concerns about confounding and selection bias become relevant in addition to those on measurement that are of greatest concern in accuracy studies. PMID:26954678

Reducing random measurement error in assessing postural load on the back in epidemiologic surveys.

PubMed

Burdorf, A

1995-02-01

The goal of this study was to design strategies to assess postural load on the back in occupational epidemiology by taking into account the reliability of measurement methods and the variability of exposure among the workers under study. Intermethod reliability studies were evaluated to estimate the systematic bias (accuracy) and random measurement error (precision) of various methods to assess postural load on the back. Intramethod reliability studies were reviewed to estimate random variability of back load over time. Intermethod surveys have shown that questionnaires have a moderate reliability for gross activities such as sitting, whereas duration of trunk flexion and rotation should be assessed by observation methods or inclinometers. Intramethod surveys indicate that exposure variability can markedly affect the reliability of estimates of back load if the estimates are based upon a single measurement over a certain time period. Equations have been presented to evaluate various study designs according to the reliability of the measurement method, the optimum allocation of the number of repeated measurements per subject, and the number of subjects in the study. Prior to a large epidemiologic study, an exposure-oriented survey should be conducted to evaluate the performance of measurement instruments and to estimate sources of variability for back load. The strategy for assessing back load can be optimized by balancing the number of workers under study and the number of repeated measurements per worker.

Measurement Matrix Design for Phase Retrieval Based on Mutual Information

NASA Astrophysics Data System (ADS)

Shlezinger, Nir; Dabora, Ron; Eldar, Yonina C.

2018-01-01

In phase retrieval problems, a signal of interest (SOI) is reconstructed based on the magnitude of a linear transformation of the SOI observed with additive noise. The linear transform is typically referred to as a measurement matrix. Many works on phase retrieval assume that the measurement matrix is a random Gaussian matrix, which, in the noiseless scenario with sufficiently many measurements, guarantees invertability of the transformation between the SOI and the observations, up to an inherent phase ambiguity. However, in many practical applications, the measurement matrix corresponds to an underlying physical setup, and is therefore deterministic, possibly with structural constraints. In this work we study the design of deterministic measurement matrices, based on maximizing the mutual information between the SOI and the observations. We characterize necessary conditions for the optimality of a measurement matrix, and analytically obtain the optimal matrix in the low signal-to-noise ratio regime. Practical methods for designing general measurement matrices and masked Fourier measurements are proposed. Simulation tests demonstrate the performance gain achieved by the proposed techniques compared to random Gaussian measurements for various phase recovery algorithms.

Use of Telehealth for Research and Clinical Measures in Cochlear Implant Recipients: A Validation Study

ERIC Educational Resources Information Center

Hughes, Michelle L.; Goehring, Jenny L.; Baudhuin, Jacquelyn L.; Diaz, Gina R.; Sanford, Todd; Harpster, Roger; Valente, Daniel L.

2012-01-01

Purpose: The goal of this study was to compare clinical and research-based cochlear implant (CI) measures using telehealth versus traditional methods. Method: This prospective study used an ABA design (A = laboratory, B = remote site). All measures were made twice per visit for the purpose of assessing within-session variability. Twenty-nine adult…

Mathematics Curriculum Based Measurement to Predict State Test Performance: A Comparison of Measures and Methods

ERIC Educational Resources Information Center

Stevens, Olinger; Leigh, Erika

2012-01-01

Scope and Method of Study: The purpose of the study is to use an empirical approach to identify a simple, economical, efficient, and technically adequate performance measure that teachers can use to assess student growth in mathematics. The current study has been designed to expand the body of research for math CBM to further examine technical…

Sensitivity study on durability variables of marine concrete structures

NASA Astrophysics Data System (ADS)

Zhou, Xin'gang; Li, Kefei

2013-06-01

In order to study the influence of parameters on durability of marine concrete structures, the parameter's sensitivity analysis was studied in this paper. With the Fick's 2nd law of diffusion and the deterministic sensitivity analysis method (DSA), the sensitivity factors of apparent surface chloride content, apparent chloride diffusion coefficient and its time dependent attenuation factor were analyzed. The results of the analysis show that the impact of design variables on concrete durability was different. The values of sensitivity factor of chloride diffusion coefficient and its time dependent attenuation factor were higher than others. Relative less error in chloride diffusion coefficient and its time dependent attenuation coefficient induces a bigger error in concrete durability design and life prediction. According to probability sensitivity analysis (PSA), the influence of mean value and variance of concrete durability design variables on the durability failure probability was studied. The results of the study provide quantitative measures of the importance of concrete durability design and life prediction variables. It was concluded that the chloride diffusion coefficient and its time dependent attenuation factor have more influence on the reliability of marine concrete structural durability. In durability design and life prediction of marine concrete structures, it was very important to reduce the measure and statistic error of durability design variables.

FACTORS INFLUENCING THE DESIGN OF BIOACCUMULATION FACTOR AND BIOTA-SEDIMENT ACCUMULATION FACTOR FIELD STUDIES

EPA Science Inventory

General guidance for designing field studies to measure bioaccumulation factors (BAFs) and biota-sediment accumulation factors (BSAFs) is not available. To develop such guidance, a series of modeling simulations were performed to evaluate the underlying factors and principles th...

The efficacy of GMFM-88 and GMFM-66 to detect changes in gross motor function in children with cerebral palsy (CP): a literature review.

PubMed

Alotaibi, Madawi; Long, Toby; Kennedy, Elizabeth; Bavishi, Siddhi

2014-01-01

The purpose of this study was to review published research on the use of the Gross Motor Function Measure (GMFM-88) and (GMFM-66) as outcome measures to determine if these tools detect changes in gross motor function in children with cerebral palsy (CP) undergoing interventions. A comprehensive literature search was conducted using Medline and PubMed to identify studies published from January 2000 through January 2011 that reported the accuracy of GMFM-88 and GMFM-66 to measure changes over time in children with CP undergoing interventions. The keywords used for the search were "GMFM" and "CP". Two of the authors (M.A. and S.B.) reviewed the titles and abstracts found in the databases. The methodological quality of the studies was assessed by using the Critical Review Form-Quantitative Studies. Of 62 papers initially identified, 21 studies fulfilled the inclusion criteria. These articles consist of three longitudinal studies, six randomized controlled trials, four repeated measure design, six pre-post test design, a case series and one non-randomized prospective study. The included studies were generally of moderate to high methodological quality. The studies included children from a wide age range of 10 months to 16 years. According to the National Health and Medical Research Council, the study designs were level II, III-2, III-3 and IV. The review suggests that the GMFM-88 and GMFM-66 are useful as outcome measures to detect changes in gross motor function in children with CP undergoing interventions. Implications for Rehabilitation Accurate measurement of change in gross motor skill acquisition is important to determine effectiveness of intervention programs in children with cerebral palsy (CP). The Gross Motor Function Measure (GMFM-88 and GMFM-66) are common tools used by rehabilitation specialists to measure gross motor function in children with CP. The GMFM appears to be an effective outcome tool for measuring change in gross motor function according to a small number of randomized control studies utilizing participant populations of convenience.

New Measure for Fathers of Children with Developmental Challenges

ERIC Educational Resources Information Center

Ly, A. R.; Goldberg, W. A.

2014-01-01

Background: There is a relative lack of measures tailored to the study of fathers of children with developmental challenges (DCs). The goal of the current study was to create and validate a brief measure designed to capture the perceptions and experiences of these fathers. The Fathers of Children with Developmental Challenges (FCDC) questionnaire…

Self-Report Measure of Psychological Abuse of Older Adults

ERIC Educational Resources Information Center

Conrad, Kendon J.; Iris, Madelyn; Ridings, John W.; Langley, Kate; Anetzberger, Georgia J.

2011-01-01

Purpose: This study tested key psychometric properties of the Older Adult Psychological Abuse Measure (OAPAM), one self-report scale of the Older Adult Mistreatment Assessment (OAMA). Design and Methods: Items and theory were developed in a prior concept mapping study. Subsequently, the measures were administered to 226 substantiated clients by 22…

Virtual reality sickness questionnaire (VRSQ): Motion sickness measurement index in a virtual reality environment.

PubMed

Kim, Hyun K; Park, Jaehyun; Choi, Yeongcheol; Choe, Mungyeong

2018-05-01

This study aims to develop a motion sickness measurement index in a virtual reality (VR) environment. The VR market is in an early stage of market formation and technological development, and thus, research on the side effects of VR devices such as simulator motion sickness is lacking. In this study, we used the simulator sickness questionnaire (SSQ), which has been traditionally used for simulator motion sickness measurement. To measure the motion sickness in a VR environment, 24 users performed target selection tasks using a VR device. The SSQ was administered immediately after each task, and the order of work was determined using the Latin square design. The existing SSQ was revised to develop a VR sickness questionnaire, which is used as the measurement index in a VR environment. In addition, the target selection method and button size were found to be significant factors that affect motion sickness in a VR environment. The results of this study are expected to be used for measuring and designing simulator sickness using VR devices in future studies. Copyright © 2018 Elsevier Ltd. All rights reserved.

Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study: research design and methodology.

PubMed

Badland, Hannah M; Schofield, Grant M; Witten, Karen; Schluter, Philip J; Mavoa, Suzanne; Kearns, Robin A; Hinckson, Erica A; Oliver, Melody; Kaiwai, Hector; Jensen, Victoria G; Ergler, Christina; McGrath, Leslie; McPhee, Julia

2009-07-10

Built environment attributes are recognized as being important contributors to physical activity (PA) engagement and body size in adults and children. However, much of the existing research in this emergent public health field is hindered by methodological limitations, including: population and site homogeneity, reliance on self-report measures, aggregated measures of PA, and inadequate statistical modeling. As an integral component of multi-country collaborative research, the Understanding the Relationship between Activity and Neighbourhoods (URBAN) Study seeks to overcome these limitations by determining the strengths of association between detailed measures of the neighborhood built environment with PA levels across multiple domains and body size measures in adults and children. This article outlines the research protocol developed for the URBAN Study. The URBAN Study is a multi-centered, stratified, cross-sectional research design, collecting data across four New Zealand cities. Within each city, 12 neighborhoods were identified and selected for investigation based on higher or lower walkability and Māori demographic attributes. Neighborhoods were selected to ensure equal representation of these characteristics. Within each selected neighborhood, 42 households are being randomly selected and an adult and child (where possible) recruited into the study. Data collection includes: objective and self-reported PA engagement, neighborhood perceptions, demographics, and body size measures. The study was designed to recruit approximately 2,000 adults and 250 children into the project. Other aspects of the study include photovoice, which is a qualitative assessment of built environment features associated with PA engagement, an audit of the neighborhood streetscape environment, and an individualized neighborhood walkability profile centered on each participant's residential address. Multilevel modeling will be used to examine the individual-level and neighborhood-level relationships with PA engagement and body size. The URBAN Study is applying a novel scientifically robust research design to provide urgently needed epidemiological information regarding the associations between the built environment and health outcomes. The findings will contribute to a larger, international initiative in which similar neighborhood selection and PA measurement procedures are utilized across eight countries. Accordingly, this study directly addresses the international priority issues of increasing PA engagement and decreasing obesity levels.

Strategically Focused Training in Six Sigma Way: A Case Study

ERIC Educational Resources Information Center

Pandey, Ashish

2007-01-01

Purpose: The purpose of the current study is to examine the utility of Six Sigma interventions as a performance measure and explore its applicability for making the training design and delivery operationally efficient and strategically effective. Design/methodology/approach: This is a single revelatory case study. Data were collected from multiple…

Study design options in evaluating gene-environment interactions: practical considerations for a planned case-control study of pediatric leukemia.

PubMed

Goodman, Michael; Dana Flanders, W

2007-04-01

We compare methodological approaches for evaluating gene-environment interaction using a planned study of pediatric leukemia as a practical example. We considered three design options: a full case-control study (Option I), a case-only study (Option II), and a partial case-control study (Option III), in which information on controls is limited to environmental exposure only. For each design option we determined its ability to measure the main effects of environmental factor E and genetic factor G, and the interaction between E and G. Using the leukemia study example, we calculated sample sizes required to detect and odds ratio (OR) of 2.0 for E alone, an OR of 10 for G alone and an interaction G x E of 3. Option I allows measuring both main effects and interaction, but requires a total sample size of 1,500 cases and 1,500 controls. Option II allows measuring only interaction, but requires just 121 cases. Option III allows calculating the main effect of E, and interaction, but not the main effect of G, and requires a total of 156 cases and 133 controls. In this case, the partial case-control study (Option III) appears to be more efficient with respect to its ability to answer the research questions for the amount of resources required. The design options considered in this example are not limited to observational epidemiology and may be applicable in studies of pharmacogenomics, survivorship, and other areas of pediatric ALL research.

Assessment of watershed regionalization for the land use change parameterization

NASA Astrophysics Data System (ADS)

Randusová, Beata; Kohnová, Silvia; Studvová, Zuzana; Marková, Romana; Nosko, Radovan

2016-04-01

The estimation of design discharges and water levels of extreme floods is one of the most important parts of the design process for a large number of engineering projects and studies. Floods and other natural hazards initiated by climate, soil, and land use changes are highly important in the 21st century. Flood risks and design flood estimation is particularly challenging. Methods of design flood estimation can be applied either locally or regionally. To obtain the design values in such cases where no recorded data exist, many countries have adopted procedures that fit the local conditions and requirements. One of these methods is the Soil Conservation Service - Curve number (SCS-CN) method which is often used in design flood estimation for ungauged sites. The SCS-CN method is an empirical rainfall-runoff model developed by the USDA Natural Resources Conservation Service (formerly called the Soil Conservation Service or SCS). The runoff curve number (CN) is based on the hydrological soil characteristics, land use, land management and antecedent saturation conditions of soil. This study is focused on development of the SCS-CN methodology for the changing land use conditions in Slovak basins (with the pilot site of the Myjava catchment), which regionalize actual state of land use data and actual rainfall and discharge measurements of the selected river basins. In this study the state of the water erosion and sediment transport along with a subsequent proposal of erosion control measures was analyzed as well. The regionalized SCS-CN method was subsequently used for assessing the effectiveness of this control measure to reduce runoff from the selected basin. For the determination of the sediment transport from the control measure to the Myjava basin, the SDR (Sediment Delivery Ratio) model was used.

Obesity and the community food environment: a systematic review.

PubMed

Holsten, Joanna E

2009-03-01

To examine the relationship between obesity and the community and/or consumer food environment. A comprehensive literature search of multiple databases was conducted and seven studies were identified for review. Studies were selected if they measured BMI and environmental variables related to food outlets. Environmental variables included the geographic arrangement of food stores or restaurants in communities and consumer conditions such as food price and availability within each outlet. The study designs, methods, limitations and results related to obesity and the food environment were reviewed, and implications for future research were synthesized. The reviewed studies used cross-sectional designs to examine the community food environment defined as the number per capita, proximity or density of food outlets. Most studies indirectly identified food outlets through large databases. The studies varied substantially in sample populations, outcome variables, units of measurement and data analysis. Two studies did not find any significant association between obesity rates and community food environment variables. Five studies found significant results. Many of the studies were subject to limitations that may have mitigated the validity of the results. Research examining obesity and the community or consumer food environment is at an early stage. The most pertinent gaps include primary data at the individual level, direct measures of the environment, studies examining the consumer environment and study designs involving a time sequence. Future research should directly measure multiple levels of the food environment and key confounders at the individual level.

A d-statistic for single-case designs that is equivalent to the usual between-groups d-statistic.

PubMed

Shadish, William R; Hedges, Larry V; Pustejovsky, James E; Boyajian, Jonathan G; Sullivan, Kristynn J; Andrade, Alma; Barrientos, Jeannette L

2014-01-01

We describe a standardised mean difference statistic (d) for single-case designs that is equivalent to the usual d in between-groups experiments. We show how it can be used to summarise treatment effects over cases within a study, to do power analyses in planning new studies and grant proposals, and to meta-analyse effects across studies of the same question. We discuss limitations of this d-statistic, and possible remedies to them. Even so, this d-statistic is better founded statistically than other effect size measures for single-case design, and unlike many general linear model approaches such as multilevel modelling or generalised additive models, it produces a standardised effect size that can be integrated over studies with different outcome measures. SPSS macros for both effect size computation and power analysis are available.

Radar Cross Section Studies/Compact Range Research

NASA Technical Reports Server (NTRS)

Burnside, W. D.; Dominek, A. K.; Gupta, I. J.; Newman, E. H.; Pathak, P. H.; Peters, L., Jr.

1988-01-01

A summary is given of the achievements of NASA Grant NsG-1613 by Ohio State University from May 1, 1987 to April 30, 1988. The major topics covered are as follows: (1) electromagnetic scattering analysis; (2) indoor scattering measurement systems; (3) RCS control; (4) waveform processing techniques; (5) material scattering and design studies; (6) design and evaluation of design studies; and (7) antenna studies. Major progress has been made in each of these areas as verified by the numerous publications produced.

Social cohesion through football: a quasi-experimental mixed methods design to evaluate a complex health promotion program

PubMed Central

2010-01-01

Social isolation and disengagement fragments local communities. Evidence indicates that refugee families are highly vulnerable to social isolation in their countries of resettlement. Research to identify approaches to best address this is needed. Football United is a program that aims to foster social inclusion and cohesion in areas with high refugee settlement in New South Wales, Australia, through skills and leadership development, mentoring, and the creation of links with local community and corporate leaders and organisations. The Social Cohesion through Football study's broad goal is to examine the implementation of a complex health promotion program, and to analyse the processes involved in program implementation. The study will consider program impact on individual health and wellbeing, social inclusion and cohesion, as well as analyse how the program by necessity interacts and adapts to context during implementation, a concept we refer to as plasticity. The proposed study will be the first prospective cohort impact study to our knowledge to assess the impact of a comprehensive integrated program using football as a vehicle for fostering social inclusion and cohesion in communities with high refugee settlement. Methods/design A quasi-experimental cohort study design with treatment partitioning involving four study sites. The study employs a 'dose response' model, comparing those with no involvement in the Football United program with those with lower or higher levels of participation. A range of qualitative and quantitative measures will be used in the study. Study participants' emotional well being, resilience, ethnic identity and other group orientation, feelings of social inclusion and belonging will be measured using a survey instrument complemented by relevant data drawn from in-depth interviews, self reporting measures and participant observation. The views of key informants from the program and the wider community will also be solicited. Discussion The complexity of the Football United program poses challenges for measurement, and requires the study design to be responsive to the dynamic nature of the program and context. Assessment of change is needed at multiple levels, drawing on mixed methods and multidisciplinary approaches in implementation and evaluation. Attention to these challenges has underpinned the design and methods in the Social Cohesion through Football study, which will use a unique and innovative combination of measures that have not been applied together previously in social inclusion/cohesion and sport and social inclusion/cohesion program research. PMID:20920361

Field study of communication and workload in police helicopters - Implications for AI cockpit design

NASA Technical Reports Server (NTRS)

Linde, Charlotte; Shively, Robert J.

1988-01-01

This paper reports on the work performed by civilian helicopter crews, using audio and video recordings and a variety of workload measures (heart rate and subjective ratings) obtained in a field study of public service helicopter missions. The number and frequency of communications provided a significant source of workload. This is relevant to the design of automated cockpit systems, since many designs presuppose the use of voice I/O systems. Fluency of communications (including pauses, hesitation markers, repetitions, and false starts) furnished an early indication of the effects of fatigue. Three workload measures were correlated to identify high workload segments of flight, and to suggest alternate task allocations between crew members.

PROMIS measures of pain, fatigue, negative affect, physical function, and social function demonstrated clinical validity across a range of chronic conditions.

PubMed

Cook, Karon F; Jensen, Sally E; Schalet, Benjamin D; Beaumont, Jennifer L; Amtmann, Dagmar; Czajkowski, Susan; Dewalt, Darren A; Fries, James F; Pilkonis, Paul A; Reeve, Bryce B; Stone, Arthur A; Weinfurt, Kevin P; Cella, David

2016-05-01

To present an overview of a series of studies in which the clinical validity of the National Institutes of Health's Patient Reported Outcome Measurement Information System (NIH; PROMIS) measures was evaluated, by domain, across six clinical populations. Approximately 1,500 individuals at baseline and 1,300 at follow-up completed PROMIS measures. The analyses reported in this issue were conducted post hoc, pooling data across six previous studies, and accommodating the different designs of the six, within-condition, parent studies. Changes in T-scores, standardized response means, and effect sizes were calculated in each study. When a parent study design allowed, known groups validity was calculated using a linear mixed model. The results provide substantial support for the clinical validity of nine PROMIS measures in a range of chronic conditions. The cross-condition focus of the analyses provided a unique and multifaceted perspective on how PROMIS measures function in "real-world" clinical settings and provides external anchors that can support comparative effectiveness research. The current body of clinical validity evidence for the nine PROMIS measures indicates the success of NIH PROMIS in developing measures that are effective across a range of chronic conditions. Copyright © 2016 Elsevier Inc. All rights reserved.

Students' Perceptions and Faculty Measured Competencies in Higher Education

ERIC Educational Resources Information Center

Malechwanzi, J. Muthiani; Lei, Hongde; Wang, Lu

2016-01-01

This study aims to investigate whether there is significant relationship between students' perceived faculty competencies and faculty evaluated competencies. The study identified four main dimensions for measuring faculty competencies namely: teaching, research, additional services and advising. This study adopted a mixed method design. The study…

Off-design flow measurements in a centrifugal compressor vaneless diffuser

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pinarbasi, A.; Johnson, M.W.

1995-10-01

Detailed measurements have been taken of the three-dimensional velocity field within the vaneless diffuser of a backswept low speed centrifugal compressor using hot-wire anemometry. A 16% below and an 11% above design flow rate were used in the present study. Results at both flow rates show how the blade wake mixes out more rapidly than the passage wake. Strong secondary flows inherited from the impeller at the higher flow rate delay the mixing out of the circumferential velocity variations, but at both flow rates these circumferential variations are negligible at the last measurement station. The measured tangential/radial flow angle ismore » used to recommend optimum values for the vaneless space and vane angle for design of a vaned diffuser.« less

Improved characterizing of access for assessing the impact of community design on active transportation and health outcomes.

DOT National Transportation Integrated Search

2013-04-01

This study was aimed at characterizing transportation access by incorporating the Street Smart Walk : Score. This was done by conducting an assessment of common measures of street design, street : network design, land use, and Street Smart Walk Sco...

Domestic cooking and food skills: A review.

PubMed

McGowan, Laura; Caraher, Martin; Raats, Monique; Lavelle, Fiona; Hollywood, Lynsey; McDowell, Dawn; Spence, Michelle; McCloat, Amanda; Mooney, Elaine; Dean, Moira

2017-07-24

Domestic cooking skills (CS) and food skills (FS) encompass multiple components, yet there is a lack of consensus on their constituent parts, inter-relatedness, or measurement, leading to limited empirical support for their role in influencing dietary quality. This review assessed the measurement of CS and FS in adults (>16 years); critically examining study designs, psychometric properties of measures, theoretical basis, and associations of CS/FS with diet. Electronic databases (PsychInfo), published reports, and systematic reviews on cooking and home food preparation interventions provided 834 articles of which 26 met the inclusion criteria. Multiple CS/FS measures were identified across three study designs-qualitative, cross-sectional, and dietary interventions-conducted from 1998 to 2013. Most measures were not theory-based, limited psychometric data were available, with little consistency of items or scales used for CS/FS measurements. Some positive associations between CS/FS and fruit and vegetables intake were reported, though lasting dietary changes were uncommon. The role of psycho-social (e.g., gender, attitudes) and external factors (e.g., food availability) on CS/FS is discussed. A conceptual framework of CS/FS components is presented for future measurement facilitation, which highlights the role for CS/FS on food-related behavior and dietary quality. This will aid future dietary intervention design.

Measurements of zinc absorption: application and interpretation in research designed to improve human zinc nutriture.

PubMed

Hambidge, K Michael; Miller, Leland V; Tran, Cuong D; Krebs, Nancy F

2005-11-01

The focus of this paper is on the application of measurements of zinc absorption in human research, especially studies designed to assess the efficacy of intervention strategies to prevent and manage zinc deficiency in populations. Emphasis is given to the measurement of quantities of zinc absorbed rather than restricting investigations to measurements of fractional absorption of zinc. This is especially important when determining absorption of zinc from the diet, whether it be the habitual diet or an intervention diet under evaluation. Moreover, measurements should encompass all meals for a minimum of one day with the exception of some pilot studies. Zinc absorption is primarily via an active saturable transport process into the enterocytes of the proximal small intestine. The relationship between quantity of zinc absorbed and the quantity ingested is best characterized by saturable binding models. When applied to human studies that have sufficient data to examine dose-response relationships, efficiency of absorption is high until approximately 50-60% maximal absorption is achieved, even with moderate phytate intakes. This also coincides approximately with the quantity of absorbed zinc necessary to meet physiologic requirements. Efficiency of absorption with intakes that exceed this level is low or very low. These observations have important practical implications for the design and interpretation of intervention studies to prevent zinc deficiency. They also suggest the potential utility of measurements of the quantity of zinc absorbed when evaluating the zinc status of populations.

Developing safety performance functions incorporating reliability-based risk measures.

PubMed

Ibrahim, Shewkar El-Bassiouni; Sayed, Tarek

2011-11-01

Current geometric design guides provide deterministic standards where the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from these standards. Several studies have advocated probabilistic geometric design where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a risk measure of the implication of deviation from design standards. However, there is currently no link between measures of design reliability and the quantification of safety using collision frequency. The analysis presented in this paper attempts to bridge this gap by incorporating a reliability-based quantitative risk measure such as the probability of non-compliance (P(nc)) in safety performance functions (SPFs). Establishing this link will allow admitting reliability-based design into traditional benefit-cost analysis and should lead to a wider application of the reliability technique in road design. The present application is concerned with the design of horizontal curves, where the limit state function is defined in terms of the available (supply) and stopping (demand) sight distances. A comprehensive collision and geometric design database of two-lane rural highways is used to investigate the effect of the probability of non-compliance on safety. The reliability analysis was carried out using the First Order Reliability Method (FORM). Two Negative Binomial (NB) SPFs were developed to compare models with and without the reliability-based risk measures. It was found that models incorporating the P(nc) provided a better fit to the data set than the traditional (without risk) NB SPFs for total, injury and fatality (I+F) and property damage only (PDO) collisions. Copyright © 2011 Elsevier Ltd. All rights reserved.

An experimental system for symmetric capacitive rf discharge studies

NASA Astrophysics Data System (ADS)

Godyak, V. A.; Piejak, R. B.; Alexandrovich, B. M.

1990-09-01

An experimental system has been designed and built to comprehensively study the electrical and plasma characteristics in symmetric capacitively coupled rf discharges at low gas pressures. Descriptions of the system concept, the discharge chamber, the vacuum-gas control system, and the rf matching and electrical measurement system are presented together with some results of electrical measurements carried out in an argon discharge at 13.56 MHz. The system has been specifically designed to facilitate external discharge parameter measurements and probe measurements and to be compatible with a wide variety of other diagnostics. External electrical measurements and probe measurements within the discharge show that it is an ideal vehicle to study low-pressure rf discharge physics. Measurements from this system should be comparable to one-dimensional rf symmetric capacitive discharge theories and may help to verify them. Although only a few results are given here, the system has been operated reliably over a wide range of gas pressures and should give reproducible and accurate results for discharge electrical characteristics and plasma parameters over a wide range of driving frequency and gas components.

An evaluation of NCRP report 151--radiation shielding design for radiotherapy facilities, and a feasibility study for 6 MV open-door treatments in an existing high-energy radiation therapy bunker

NASA Astrophysics Data System (ADS)

Kildea, John

This thesis describes a study of shielding design techniques used for radiation therapy facilities that employ megavoltage linear accelerators. Specifically, an evaluation of the shielding design formalism described in NCRP report 151 was undertaken and a feasibility study for open-door 6 MV radiation therapy treatments in existing 6 MV, 18 MV treatment rooms at the Montreal General Hospital (MGH) was conducted. To evaluate the shielding design formalism of NCRP 151, barrier-attenuated equivalent doses were measured for several of the treatment rooms at the MGH and compared with expectations from NCRP 151 calculations. It was found that, while the insight and recommendations of NCRP 151 are very valuable, its dose predictions are not always correct. As such, the NCRP 151 methodology is best used in conjunction with physical measurements. The feasibility study for 6 MV open-door treatments made use of the NCRP 151 formalism, together with physical measurements for realistic 6 MV workloads. The results suggest that, dosimetrically, 6 MV open door treatments are feasible. A conservative estimate for the increased dose at the door arising from such treatments is 0.1 mSv, with a 1/8 occupancy factor, as recommended in NCRP 151, included.

Rotavirus vaccine effectiveness in low-income settings: An evaluation of the test-negative design.

PubMed

Schwartz, Lauren M; Halloran, M Elizabeth; Rowhani-Rahbar, Ali; Neuzil, Kathleen M; Victor, John C

2017-01-03

The test-negative design (TND), an epidemiologic method currently used to measure rotavirus vaccine (RV) effectiveness, compares the vaccination status of rotavirus-positive cases and rotavirus-negative controls meeting a pre-defined case definition for acute gastroenteritis. Despite the use of this study design in low-income settings, the TND has not been evaluated to measure rotavirus vaccine effectiveness. This study builds upon prior methods to evaluate the use of the TND for influenza vaccine using a randomized controlled clinical trial database. Test-negative vaccine effectiveness (VE-TND) estimates were derived from three large randomized placebo-controlled trials (RCTs) of monovalent (RV1) and pentavalent (RV5) rotavirus vaccines in sub-Saharan Africa and Asia. Derived VE-TND estimates were compared to the original RCT vaccine efficacy estimates (VE-RCTs). The core assumption of the TND (i.e., rotavirus vaccine has no effect on rotavirus-negative diarrhea) was also assessed. TND vaccine effectiveness estimates were nearly equivalent to original RCT vaccine efficacy estimates. Neither RV had a substantial effect on rotavirus-negative diarrhea. This study supports the TND as an appropriate epidemiologic study design to measure rotavirus vaccine effectiveness in low-income settings. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Optimal design of focused experiments and surveys

NASA Astrophysics Data System (ADS)

Curtis, Andrew

1999-10-01

Experiments and surveys are often performed to obtain data that constrain some previously underconstrained model. Often, constraints are most desired in a particular subspace of model space. Experiment design optimization requires that the quality of any particular design can be both quantified and then maximized. This study shows how the quality can be defined such that it depends on the amount of information that is focused in the particular subspace of interest. In addition, algorithms are presented which allow one particular focused quality measure (from the class of focused measures) to be evaluated efficiently. A subclass of focused quality measures is also related to the standard variance and resolution measures from linearized inverse theory. The theory presented here requires that the relationship between model parameters and data can be linearized around a reference model without significant loss of information. Physical and financial constraints define the space of possible experiment designs. Cross-well tomographic examples are presented, plus a strategy for survey design to maximize information about linear combinations of parameters such as bulk modulus, κ =λ+ 2μ/3.

Candidate configuration trade study, Stellar-inertial Measurement Systems (SIMS) for an Earth Observation Satellite (EOS)

NASA Technical Reports Server (NTRS)

Ogletree, G.; Coccoli, J.; Mckern, R.; Smith, M.; White, R.

1972-01-01

The results of analytical and simulation studies of the stellar-inertial measurement system (SIMS) for an earth observation satellite are presented. Subsystem design analyses and sensor design trades are reported. Three candidate systems are considered: (1) structure-mounted gyros with structure-mounted star mapper, (2) structure-mounted gyros with gimbaled star tracker, and (3) gimbaled gyros with structure-mounted star mapper. The purpose of the study is to facilitate the decisions pertaining to gimbaled versus structure-mounted gyros and star sensors, and combinations of systems suitable for the EOS satellite.

Microwave power transmitting phased array antenna research project

NASA Technical Reports Server (NTRS)

Dickinson, R. M.

1978-01-01

An initial design study and the development results of an S band RF power transmitting phased array antenna experiment system are presented. The array was to be designed, constructed and instrumented to permit wireless power transmission technology evaluation measurements. The planned measurements were to provide data relative to the achievable performance in the state of the art of flexible surface, retrodirective arrays, as a step in technically evaluating the satellite power system concept for importing to earth, via microwave beams, the nearly continuous solar power available in geosynchronous orbit. Details of the microwave power transmitting phased array design, instrumentation approaches, system block diagrams, and measured component and breadboard characteristics achieved are presented.

Cognitive bias modification for social anxiety in adults who stutter: a feasibility study of a randomised controlled trial

PubMed Central

Gascoine, Sally; Carroll, Amy; Humby, Kate; Kingston, Mary; Shepstone, Lee; Risebro, Helen; Mackintosh, Bundy; Thompson, Tammy Davidson; Hodgekins, Jo

2017-01-01

Objective To determine the feasibility and acceptability of a computerised treatment for social anxiety disorder for adults who stutter including identification of recruitment, retention and completion rates, large cost drivers and selection of most appropriate outcome measure(s) to inform the design of a future definitive trial. Design Two-group parallel design (treatment vs placebo), double-blinded feasibility study. Participants: 31 adults who stutter. Intervention Attention training via an online probe detection task in which the stimuli were images of faces displaying neutral and disgusted expressions. Main outcome measures Psychological measures: Structured Clinical Interview Global Assessment of Functioning score; Liebowitz Social Anxiety Scale; Social Phobia and Anxiety Inventory; State-Trait Anxiety Inventory; Unhelpful Thoughts and Beliefs about Stuttering. Speech fluency: percent syllables stuttered. Economic evaluation: resource use questionnaire; EuroQol three-dimension questionnaire. Acceptability: Likert Scale questionnaire of experience of trial, acceptability of the intervention and randomisation procedure. Results Feasibility of recruitment strategy was demonstrated. Participant feedback indicated that the intervention and definitive trial, including randomisation, would be acceptable to adults who stutter. Of the 31 participants who were randomised, 25 provided data at all three data collection points. Conclusions The feasibility study informed components of the intervention. Modifications to the design are needed before a definitive trial can be undertaken. Trial registration number I SRCTN55065978; Post-results. PMID:29061602

Measurements of Development in L2 Written Production: The Case of L2 Chinese

ERIC Educational Resources Information Center

Jiang, Wenying

2013-01-01

This study investigates measures for second language (L2) writing development. A T-unit, which has been found the most satisfactory unit of analysis for measuring L2 development in English, is extended to measure L2 Chinese writing development through a cross-sectional design in this study. Data were collected from three L2 Chinese learner groups…

Multidimensional Perfectionism and the Self

ERIC Educational Resources Information Center

Ward, Andrew M.; Ashby, Jeffrey S.

2008-01-01

This study examined multidimensional perfectionism and self-development. Two hundred seventy-one undergraduates completed a measure of multidimensional perfectionism and two Kohutian measures designed to measure aspects of self-development including social connectedness, social assurance, goal instability (idealization), and grandiosity. The…

Development of new techniques for the characterization of crystals and their growth solutions: Center director's discretionary fund

NASA Technical Reports Server (NTRS)

Kroes, Roger L.; Reiss, Donald A.

1989-01-01

The solubility measurement system and the laser scattering microscope system were designed, built, and utilized for the study of crystal growth solutions and crystal characterization measurements. Solubility measurements and crystal defect maps were made with this equipment for a number of new materials. In some cases, where there have been published solubility data (i.e., TGS), more accurate measurements were made and discrepancies in the published data were resolved. The design of these instruments is presented along with a description of their use and some typical data generated using them.

Towards a capabilities database to inform inclusive design: experimental investigation of effective survey-based predictors of human-product interaction.

PubMed

Tenneti, Raji; Johnson, Daniel; Goldenberg, Liz; Parker, Richard A; Huppert, Felicia A

2012-07-01

A key issue in the field of inclusive design is the ability to provide designers with an understanding of people's range of capabilities. Since it is not feasible to assess product interactions with a large sample, this paper assesses a range of proxy measures of design-relevant capabilities. It describes a study that was conducted to identify which measures provide the best prediction of people's abilities to use a range of products. A detailed investigation with 100 respondents aged 50-80 years was undertaken to examine how they manage typical household products. Predictor variables included self-report and performance measures across a variety of capabilities (vision, hearing, dexterity and cognitive function), component activities used in product interactions (e.g. using a remote control, touch screen) and psychological characteristics (e.g. self-efficacy, confidence with using electronic devices). Results showed, as expected, a higher prevalence of visual, hearing, dexterity, cognitive and product interaction difficulties in the 65-80 age group. Regression analyses showed that, in addition to age, performance measures of vision (acuity, contrast sensitivity) and hearing (hearing threshold) and self-report and performance measures of component activities are strong predictors of successful product interactions. These findings will guide the choice of measures to be used in a subsequent national survey of design-relevant capabilities, which will lead to the creation of a capability database. This will be converted into a tool for designers to understand the implications of their design decisions, so that they can design products in a more inclusive way. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Quantitative Imaging Biomarkers: A Review of Statistical Methods for Technical Performance Assessment

PubMed Central

2017-01-01

Technological developments and greater rigor in the quantitative measurement of biological features in medical images have given rise to an increased interest in using quantitative imaging biomarkers (QIBs) to measure changes in these features. Critical to the performance of a QIB in preclinical or clinical settings are three primary metrology areas of interest: measurement linearity and bias, repeatability, and the ability to consistently reproduce equivalent results when conditions change, as would be expected in any clinical trial. Unfortunately, performance studies to date differ greatly in designs, analysis method and metrics used to assess a QIB for clinical use. It is therefore, difficult or not possible to integrate results from different studies or to use reported results to design studies. The Radiological Society of North America (RSNA) and the Quantitative Imaging Biomarker Alliance (QIBA) with technical, radiological and statistical experts developed a set of technical performance analysis methods, metrics and study designs that provide terminology, metrics and methods consistent with widely accepted metrological standards. This document provides a consistent framework for the conduct and evaluation of QIB performance studies so that results from multiple studies can be compared, contrasted or combined. PMID:24919831

A Pilot Study to Examine Maturation of Body Temperature Control in Preterm Infants

PubMed Central

Knobel, Robin B.; Levy, Janet; Katz, Laurence; Guenther, Bob; Holditch-Davis, Diane

2013-01-01

Objective To test instrumentation and develop analytic models to use in a larger study to examine developmental trajectories of body temperature and peripheral perfusion from birth in extremely low birth weight (EBLW) infants. Design A case study design. Setting The study took place in a level four neonatal intensive care unit (NICU) in North Carolina. Participants Four ELBW infants, less than 29 weeks gestational age at birth. Methods Physiologic data were measured every minute for the first 5 days of life: peripheral perfusion using perfusion index by Masimo and body temperature using thermistors. Body temperature was also measured using infrared thermal imaging. Stimulation and care events were recorded over the first 5 days using video which was coded with Noldus Observer software. Novel analytical models using the state space approach to time series analysis were developed to explore maturation of neural control over central and peripheral body temperature. Results/Conclusion Results from this pilot study confirmed the feasibility of using multiple instruments to measure temperature and perfusion in ELBW infants. This approach added rich data to our case study design and set a clinical context with which to interpret longitudinal physiological data. PMID:24004312

Models to support students’ understanding of measuring area of circles

NASA Astrophysics Data System (ADS)

Rejeki, S.; Putri, R. I. I.

2018-01-01

Many studies showed that enormous students got confused about the concepts of measuring area of circles. The main reason is because mathematics classroom practices emphasized on memorizing formulas rather than understanding concepts. Therefore, in this study, a set of learning activities were designed as an innovation in learning area measurement of circles. The activities involved two models namely grid paper and reshaping which are respectively as a means and a strategy to support students’ learning of area measurement of circles. Design research was used as the research approach to achieve the aim. Thirty-eight of 8th graders in Indonesia were involved in this study. In this study, together with the contextual problems, the grid paper and reshaping sectors, which used as the models in this learning, helped the students to gradually develop their understanding of the area measurement of circles. The grid papers plays important role in comparing and estimating areas. Whereas, the reshaping sectors might support students’ understanding of the circumference and the area measurement of circles. Those two models could be the tool for promoting the informal theory of area measurement. Besides, the whole activities gave important role on distinguishing the area and perimeter of circles.

Contributions to the study of inductive transducers for measuring the amplitude of vibrations in solid media

NASA Technical Reports Server (NTRS)

Dragan, O.; Galan, N.; Sirbu, A.; Ghita, C.

1974-01-01

The design and construction of inductive transducers for measuring the vibrations in metal bars at ultrasonic frequencies are discussed. Illustrations of the inductive transducers are provided. The quantitative relations that are useful in designing the transducers are analyzed. Mathematical models are developed to substantiate the theoretical considerations. Results obtained with laboratory equipment in testing specified metal samples are included.

How effective are risk assessments/measures for predicting future aggressive behaviour in adults with intellectual disabilities (ID): A systematic review and meta-analysis.

PubMed

Lofthouse, Rachael; Golding, Laura; Totsika, Vasiliki; Hastings, Richard; Lindsay, William

2017-12-01

Risk assessments assist professionals in the identification and management of risk of aggression. The present study aimed to systematically review evidence on the efficacy of assessments for managing the risk of physical aggression in adults with intellectual disabilities (ID). A literature search was conducted using the databases PsycINFO, EMBASE, MEDLINE, Web of Science, and Google Scholar. Electronic and hand searches identified 14 studies that met the inclusion criteria. Standardised mean difference effect sizes Area Under Curve (AUC) were calculated for studies. Random effects subgroup analysis was used to compare different types of risk measures (Actuarial, Structured Professional Judgment and dynamic), and prospective vs. catch-up longitudinal study designs. Overall, evidence of predictive validity was found for risk measures with ID populations: (AUC)=0.724, 95% CI [0.681, 0.768]. There was no variation in the performance of different types of risk measures, or different study design. Risk assessment measures predict the likelihood of aggression in ID population and are comparable to those in mainstream populations. Further meta-analysis is necessary when risk measures are more established in this population. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assurance of Learning and Study Abroad: A Case Study

ERIC Educational Resources Information Center

Rexeisen, Richard J.; Al-Khatib, Jamal

2009-01-01

Most academic programs are now held accountable for measuring student-learning outcomes. This article reports the results of an assurance of learning (AOL) project designed to measure the impact of study abroad on the development of ethical reasoning, intercultural sensitivity, and environmental attitudes. The Association to Advance Collegiate…

Center for the Built Environment

Science.gov Websites

wellbeing research, who will share insights on how to design, operate and measure healthy and productive buildings that showcase sustainable design that provide high quality spaces for work and study have been recognized annual Livable Buildings Award. Reports Reveal New Insights into Energy Performance and Design

RADON PREVENTION IN THE DESIGN AND CONSTRUCTION OF SCHOOLS AND OTHER LARGE BUILDINGS

EPA Science Inventory

The paper discusses radon prevention in the design and construction of schools and other large buildings. ased on studies in progress for the past 3 years, the U.S. EPA's Office of Research and Development (ORD) has started incorporating radon control measures into the design and...

Catalyzing Graduate Teaching Assistants' Laboratory Teaching through Design Research

ERIC Educational Resources Information Center

Bond-Robinson, Janet; Rodriques, Romola A. Bernard

2006-01-01

We report on a study of a laboratory teaching apprenticeship program designed to improve graduate teaching assistant (GTA) performance. To catalyze GTAs as laboratory teachers we constructed learning goals, synthesized previous literature into a design model and a developmental path, and built two instruments to measure 12 strategic pedagogical…

Scientific Arguments as Learning Artifacts: Designing for Learning from the Web with KIE.

ERIC Educational Resources Information Center

Bell, Philip; Linn, Marcia C.

2000-01-01

Examines how students use evidence, determines when they add further ideas and claims, and measures progress in understanding light propagation. Uses the Scaffolded Knowledge Integration (SKI) instructional framework for design decisions. Discusses design studies that test and elaborate on the instructional framework. (Contains 33 references.)…

Comparative study on stress distribution around internal tapered connection implants according to fit of cement- and screw-retained prostheses.

PubMed

Lee, Mi-Young; Heo, Seong-Joo; Park, Eun-Jin; Park, Ji-Man

2013-08-01

The aim of this study was to compare the passivity of implant superstructures by assessing the strain development around the internal tapered connection implants with strain gauges. A polyurethane resin block in which two implants were embedded served as a measurement model. Two groups of implant restorations utilized cement-retained design and internal surface of the first group was adjusted until premature contact between the restoration and the abutment completely disappeared. In the second group, only nodules detectable to the naked eye were removed. The third group employed screw-retained design and specimens were generated by computer-aided design/computer-aided manufacturing system (n=10). Four strain gauges were fixed on the measurement model mesially and distally to the implants. The strains developed in each strain gauge were recorded during fixation of specimens. To compare the difference among groups, repeated measures 2-factor analysis was performed at a level of significance of α=.05. The absolute strain values were measured to analyze the magnitude of strain. The mean absolute strain value ranged from 29.53 to 412.94 µm/m at the different strain gauge locations. According to the result of overall comparison, the cement-retained prosthesis groups exhibited significant difference. No significant difference was detected between milled screw-retained prostheses group and cement-retained prosthesis groups. Within the limitations of the study, it was concluded that the cement-retained designs do not always exhibit lower levels of stress than screw-retained designs. The internal adjustment of a cement-retained implant restoration is essential to achieve passive fit.

Design of the optical backscatter diagnostic for laser plasma interaction measurements on NIF

NASA Astrophysics Data System (ADS)

Moody, J. D.; Datte, P.; Ng, E.; Maitland, K.; Hsing, W.; MacGowan, B. J.; Froula, D. H.; Neumayer, P.; Sutter, L.; Meezan, N.; Glenzer, S. H.; Kirkwood, R. K.; Divol, L.; Andrews, S.; Jackson, J.; MacKinnon, A.; Jovanovic, I.; Beeler, R.; Bertolini, L.; Landon, M.; Alvarez, S.; Lee, T.; Watts, P.

2007-11-01

We describe the design of the backscatter diagnostic for NIF laser-plasma interaction (LPI) studies. It will initially be used to validate the 280 eV point design hohlraum and select phase plates for the ignition experiments. Backscatter measurements are planned for two separate groups of 4 beams (a quad). One quad is 30^o from the hohlraum axis and the other at 50^o. The backscatter measurement utilizes 2 instruments for each beam quad. The full aperture backscatter system (FABS) measures light backscattered into the final focus lens of each beam in the quad. The near backscatter imager (NBI) measures light backscattered outside of the beam quad. Both instruments must work in conjunction to provide spectrally and temporally resolved backscatter power. We describe the design of the diagnostic and its capabilities as well as plans for calibrating it and analyzing the resulting data. This work was performed under the auspices of the U.S. Department of Energy by University of California, Lawrence Livermore National Laboratory under Contract W-7405-Eng-48.

Asset Ownership and Health and Mental Health Functioning Among AIDS-Orphaned Adolescents: Findings From a Randomized Clinical Trial in Rural Uganda

PubMed Central

Han, Chang-Keun; Neilands, Torsten B

2010-01-01

This study evaluated an economic empowerment intervention designed to promote life options, health and mental health functioning among AIDS-orphaned adolescents in rural Uganda. The study used an experimental design in which adolescents (N=267) were randomly assigned to receive an economic empowerment intervention or usual care for orphaned children. The study measured mental health functioning using 20 items of the Tennessee Self-Concept Scale (TSCS: 2)—a standardized measure for self-esteem—and measured overall health using a self-rated health measure. Data obtained at 10-month follow-up revealed significant positive effects of the economic empowerment intervention on adolescents’ self-rated health and mental health functioning. Additionally, health and mental health functioning were found to be positively associated with each other. The findings have implications for public policy and health programming for AIDS-orphaned adolescents. PMID:19520472

Remediation of Math Anxiety in Preservice Elementary School Teachers

ERIC Educational Resources Information Center

Dunkle, Susan M.

2010-01-01

The purpose of this study was to measure the level of math anxiety in preservice elementary teachers, and then to determine if remediation methods would lower the measured level of anxiety in these same preservice teachers. The 10-day study provided an intense remediation using a time-series design to measure change on the Revised Math Anxiety…

Secondary Students' Considerations of Variability in Measurement Activities Based on Authentic Practices

ERIC Educational Resources Information Center

Dierdorp, Adri; Bakker, Arthur; Ben-Zvi, Dani; Makar, Katie

2017-01-01

Measurement activities were designed in this study on the basis of authentic professional practices in which linear regression is used, to study considerations of variability by students in Grade 12 (aged 17-18). The question addressed in this article is: In what ways do secondary students consider variability within these measurement activities?…

Measuring and Enhancing Creativity

ERIC Educational Resources Information Center

Mahboub, Kamyar C.; Portillo, Margaret B.; Liu, Yinhui; Chandraratna, Susantha

2004-01-01

The purpose of this study was to assess ways by which creativity may be enhanced in a design-oriented course. In order to demonstrate the validity of the approach, a statistically based study was employed. Additionally, the experiment was replicated in two design-oriented fields at the University of Kentucky. These fields were civil engineering…

Validity of Cognitive Load Measures in Simulation-Based Training: A Systematic Review.

PubMed

Naismith, Laura M; Cavalcanti, Rodrigo B

2015-11-01

Cognitive load theory (CLT) provides a rich framework to inform instructional design. Despite the applicability of CLT to simulation-based medical training, findings from multimedia learning have not been consistently replicated in this context. This lack of transferability may be related to issues in measuring cognitive load (CL) during simulation. The authors conducted a review of CLT studies across simulation training contexts to assess the validity evidence for different CL measures. PRISMA standards were followed. For 48 studies selected from a search of MEDLINE, EMBASE, PsycInfo, CINAHL, and ERIC databases, information was extracted about study aims, methods, validity evidence of measures, and findings. Studies were categorized on the basis of findings and prevalence of validity evidence collected, and statistical comparisons between measurement types and research domains were pursued. CL during simulation training has been measured in diverse populations including medical trainees, pilots, and university students. Most studies (71%; 34) used self-report measures; others included secondary task performance, physiological indices, and observer ratings. Correlations between CL and learning varied from positive to negative. Overall validity evidence for CL measures was low (mean score 1.55/5). Studies reporting greater validity evidence were more likely to report that high CL impaired learning. The authors found evidence that inconsistent correlations between CL and learning may be related to issues of validity in CL measures. Further research would benefit from rigorous documentation of validity and from triangulating measures of CL. This can better inform CLT instructional design for simulation-based medical training.

Design and analysis issues for economic analysis alongside clinical trials.

PubMed

Marshall, Deborah A; Hux, Margaret

2009-07-01

Clinical trials can offer a valuable and efficient opportunity to collect the health resource use and outcomes data for economic evaluation. However, economic and clinical studies differ fundamentally in the question they seek to answer. The design and analysis of trial-based cost-effectiveness studies require special consideration, which are reviewed in this article. Traditional randomized controlled trials, using an experimental design with a controlled protocol, are designed to measure safety and efficacy for product registration. Cost-effectiveness analysis seeks to measure effectiveness in the context of routine clinical practice, and requires collection of health care resources to allow estimation of cost over an equal timeframe for each treatment alternative. In assessing suitability of a trial for economic data collection, the comparator treatment and other protocol factors need to reflect current clinical practice and the trial follow-up must be sufficiently long to capture important costs and effects. The broadest available population and a measure of effectiveness reflecting important benefits for patients are preferred for economic analyses. Special analytical issues include dealing with missing and censored cost data, assessing uncertainty of the incremental cost-effectiveness ratio, and accounting for the underlying heterogeneity in patient subgroups. Careful consideration also needs to be given to data from multinational studies since practice patterns can differ across countries. Although clinical trials can be an efficient opportunity to collect data for economic evaluation, careful consideration of the suitability of the study design, and appropriate analytical methods must be applied to obtain rigorous results.

Understanding Angle and Angle Measure: A Design-Based Research Study Using Context Aware Ubiquitous Learning

ERIC Educational Resources Information Center

Crompton, Helen

2015-01-01

Mobile technologies are quickly becoming tools found in the educational environment. The researchers in this study use a form of mobile learning to support students in learning about angle concepts. Design-based research is used in this study to develop an empirically-substantiated local instruction theory about students' develop of angle and…

Development and Validation of Teaching Practice Evaluation Instrument for Assessing Chemistry Students' Teaching Skills

ERIC Educational Resources Information Center

Ezeudu, F. O.; Chiaha, G. T. U.; Eze, J. U.

2013-01-01

The study was designed to develop and factorially validate an instrument for measuring teaching practice skills of chemistry student-teachers in University of Nigeria, Nsukka. Two research questions guided the study. The design of the study was instrumentation. All the chemistry student-teachers in the Department of Science Education, University…

Approaches to chronic disease management evaluation in use in Europe: a review of current methods and performance measures.

PubMed

Conklin, Annalijn; Nolte, Ellen; Vrijhoef, Hubertus

2013-01-01

An overview was produced of approaches currently used to evaluate chronic disease management in selected European countries. The study aims to describe the methods and metrics used in Europe as a first to help advance the methodological basis for their assessment. A common template for collection of evaluation methods and performance measures was sent to key informants in twelve European countries; responses were summarized in tables based on template evaluation categories. Extracted data were descriptively analyzed. Approaches to the evaluation of chronic disease management vary widely in objectives, designs, metrics, observation period, and data collection methods. Half of the reported studies used noncontrolled designs. The majority measure clinical process measures, patient behavior and satisfaction, cost and utilization; several also used a range of structural indicators. Effects are usually observed over 1 or 3 years on patient populations with a single, commonly prevalent, chronic disease. There is wide variation within and between European countries on approaches to evaluating chronic disease management in their objectives, designs, indicators, target audiences, and actors involved. This study is the first extensive, international overview of the area reported in the literature.

Conceptual design study for the use of COBE rocket engines on the Tropical Rainfall Measuring Mission

NASA Technical Reports Server (NTRS)

1992-01-01

The objective of this conceptual design study is to verify that the Cosmic Background Explorer (COBE) Hydrazine Propulsion Subsystem (HPS) Rocket Engine Assembly (REA) will satisfy the Tropical Rainfall Measuring Mission (TRMM) requirements and to develop a preliminary thruster module design using the existing REAs. The performance of the COBE HPS 5 lbf thrusters meet the TRMM mission requirements. The preliminary design consists of a single 5 lbf REA REM which is isolation mounted to a spacecraft interface angle bracket (5 or 10 deg angle). The REM incorporates a catalyst bed heater and sensor assembly, and propellant thermal control is achieved by thermostatically controlled heaters on the thruster valves. A ROM cost of approx. $950 K has been estimated for the phase 2 program to finalize the design, fabricate, and test the hardware using mechanical thermostats for thermal control. In the event that solid state thermostats are used, the cost is estimated to be $160 K higher. A ROM cost is approx. $145 K is estimated to study the effects of using Japanese manufactured hydrazine for the TRMM mission.

Seafloor Pressure Array Studies at Ultra-Low Frequencies

DTIC Science & Technology

1991-01-01

broadband instrument design and deployment. In order to measure broadband noise routinely, a low frequency pressure gauge designed for deep ocean...below the microseism band (Moore et al, 1981). A differential pressure gauge , developed for low frequency recordings by Cox et al (1984) and sensitive to...design differential pressure gauge (Cox et al, 1984) with a sensitivity -3- ULF Seafloor Pressure Array Studies range of 0.01-5 Hz. The high

Measurements of the Basic SR-71 Airplane Near-Field Signature

NASA Technical Reports Server (NTRS)

Haering, Edward A., Jr.; Whitmore, Stephen A.; Ehernberger, L. J.

1999-01-01

Airplane design studies have developed configuration concepts that may produce lower sonic boom annoyance levels. Since lower noise designs differ significantly from other HSCT designs, it is necessary to accurately assess their potential before HSCT final configuration decisions are made. Flight tests to demonstrate lower noise design capability by modifying an existing airframe have been proposed for the Mach 3 SR-71 reconnaissance airplane. To support the modified SR-71 proposal, baseline in-flight measurements were made of the unmodified aircraft. These measurements of SR-71 near-field sonic boom signatures were obtained by an F-16XL probe airplane at flightpath separation distances ranging from approximately 740 to 40 ft. This paper discusses the methods used to gather and analyze the flight data, and makes comparisons of these flight data with CFD results from Douglas Aircraft Corporation and NASA Langley Research Center. The CFD solutions were obtained for the near-field flow about the SR-71, and then propagated to the flight test measurement location using the program MDBOOM.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nabeel Riza

This final report contains the main results from a 3-year program to further investigate the merits of SiC-based hybrid sensor designs for extreme environment measurements in gas turbines. The study is divided in three parts. Part 1 studies the material properties of SiC such as temporal response, refractive index change with temperature, and material thermal response reversibility. Sensor data from a combustion rig-test using this SiC sensor technology is analyzed and a robust distributed sensor network design is proposed. Part 2 of the study focuses on introducing redundancy in the sensor signal processing to provide improved temperature measurement robustness. Inmore » this regard, two distinct measurement methods emerge. A first method uses laser wavelength sensitivity of the SiC refractive index behavior and a second method that engages the Black-Body (BB) radiation of the SiC package. Part 3 of the program investigates a new way to measure pressure via a distance measurement technique that applies to hot objects including corrosive fluids.« less

SUSTAINABLE ALLOY DESIGN: SEARCHING FOR RARE EARTH ELEMENT ALTERNATIVES THROUGH CRYSTAL ENGINEERING

DTIC Science & Technology

2016-02-26

Property Maps to Guide Materials Design via Statistical Learning Summer Research Group Meeting – Materials by Design Los Alamos National Laboratory, July...Informatics, Rational design , Quantitative correlative spectroscopy and imaging, DFT, In situ high pressure mechanical property measurements, Superalloy...final, technical, interim, memorandum, master’s thesis, progress, quarterly, research , special, group study, etc. 3. DATES COVERED. Indicate the

Differentiation and Exploration of Model MACP for HE VER 1.0 on Prototype Performance Measurement Application for Higher Education

NASA Astrophysics Data System (ADS)

El Akbar, R. Reza; Anshary, Muhammad Adi Khairul; Hariadi, Dennis

2018-02-01

Model MACP for HE ver.1. Is a model that describes how to perform measurement and monitoring performance for Higher Education. Based on a review of the research related to the model, there are several parts of the model component to develop in further research, so this research has four main objectives. The first objective is to differentiate the CSF (critical success factor) components in the previous model, the two key KPI (key performance indicators) exploration in the previous model, the three based on the previous objective, the new and more detailed model design. The final goal is the fourth designed prototype application for performance measurement in higher education, based on a new model created. The method used is explorative research method and application design using prototype method. The results of this study are first, forming a more detailed new model for measurement and monitoring of performance in higher education, differentiation and exploration of the Model MACP for HE Ver.1. The second result compiles a dictionary of college performance measurement by re-evaluating the existing indicators. The third result is the design of prototype application of performance measurement in higher education.

[Designing and implementation of a web-based quality monitoring system for plasma glucose measurement in multicenter population study].

PubMed

Liu, Yong; Wang, Limin; Pang, Richard; Mo, Nanxun; Hu, Yan; Deng, Qian; Hu, Zhaohui

2015-05-01

The aim of this paper is to describe the designing and implementation of a web-based plasma glucose measurement quality monitoring system to assess the analytical quality of plasma glucose measurements in multicenter population study and provide evidence for the future studies. In the chronic non-communicable disease and related factor surveillance in China, a web based quality monitoring system for plasma glucose measurement was established to conduct evaluation on plasma glucose monitoring quality and effectiveness in 302 surveillance centers, including quality control data entry, transmission and feedback. The majority of the surveillance centers met the quality requirements and passed the evaluation of reproducibility and precision of plasma glucose measurement, only a few centers required intensive training and re-assessment. In order to ensure the completeness and reliability of plasma glucose measurement in the surveillance centers, the establishment of web-based plasma glucose measurement quality control system can facilitate the identification of the qualified surveillance centers and evaluation of plasma glucose measurement quality in different regions. Communication and training are important in ensuring plasma glucose measurement quality. It is necessary to further improve this web-based plasma glucose measurement quality monitoring system in the future to reduce the method specific plasma glucose measurement bias.

Analytical design of sensors for measuring during terminal phase of atmospheric temperature planetary entry

NASA Technical Reports Server (NTRS)

Millard, J. P.; Green, M. J.; Sommer, S. C.

1972-01-01

An analytical study was conducted to develop a sensor for measuring the temperature of a planetary atmosphere from an entry vehicle traveling at supersonic speeds and having a detached shock. Such a sensor has been used in the Planetary Atmosphere Experiments Test Probe (PAET) mission and is planned for the Viking-Mars mission. The study specifically considered butt-welded thermocouple sensors stretched between two support posts; however, the factors considered are sufficiently general to apply to other sensors as well. This study included: (1) an investigation of the relation between sensor-measured temperature and free-stream conditions; (2) an evaluation of the effects of extraneous sources of heat; (3) the development of a computer program for evaluating sensor response during entry; and (4) a parametric study of sensor design characteristics.

Operationally efficient propulsion system study (OEPSS) data book. Volume 7; Launch Operations Index (LOI) Design Features and Options

NASA Technical Reports Server (NTRS)

Ziese, James M.

1992-01-01

A design tool of figure of merit was developed that allows the operability of a propulsion system design to be measured. This Launch Operations Index (LOI) relates Operations Efficiency to System Complexity. The figure of Merit can be used by conceptual designers to compare different propulsion system designs based on their impact on launch operations. The LOI will improve the design process by making sure direct launch operations experience is a necessary feedback to the design process.

Experimental investigation of a newly designed supersonic wind tunnel

NASA Astrophysics Data System (ADS)

Wu, J.; Radespiel, R.

2015-06-01

The flow characteristics of the tandem nozzle supersonic wind tunnel at the Institute of Fluid Mechanics, Technische Universität Braunschweig, a are investigated. Conventional measurement techniques were utilized. The flow development is examined by pressure sensors installed at various streamwise positions. The temperature is measured in the storage tube and the settling chamber. The influence of flow treatment in the settling chamber on the flow quality is also studied. The flow quality of test section is evaluated by a 6-probe Pitot rake. The pressure fluctuations in the test section are studied by a sharp cone model. Eventually, good agreement between the measurements and numerical simulation of the tunnel design is achieved.

Ku-band signal design study. [space shuttle orbiter data processing network

NASA Technical Reports Server (NTRS)

Rubin, I.

1978-01-01

Analytical tools, methods and techniques for assessing the design and performance of the space shuttle orbiter data processing system (DPS) are provided. The computer data processing network is evaluated in the key areas of queueing behavior synchronization and network reliability. The structure of the data processing network is described as well as the system operation principles and the network configuration. The characteristics of the computer systems are indicated. System reliability measures are defined and studied. System and network invulnerability measures are computed. Communication path and network failure analysis techniques are included.

An Automatic Instrument to Study the Spatial Scaling Behavior of Emissivity

PubMed Central

Tian, Jing; Zhang, Renhua; Su, Hongbo; Sun, Xiaomin; Chen, Shaohui; Xia, Jun

2008-01-01

In this paper, the design of an automatic instrument for measuring the spatial distribution of land surface emissivity is presented, which makes the direct in situ measurement of the spatial distribution of emissivity possible. The significance of this new instrument lies in two aspects. One is that it helps to investigate the spatial scaling behavior of emissivity and temperature; the other is that, the design of the instrument provides theoretical and practical foundations for the implement of measuring distribution of surface emissivity on airborne or spaceborne. To improve the accuracy of the measurements, the emissivity measurement and its uncertainty are examined in a series of carefully designed experiments. The impact of the variation of target temperature and the environmental irradiance on the measurement of emissivity is analyzed as well. In addition, the ideal temperature difference between hot environment and cool environment is obtained based on numerical simulations. Finally, the scaling behavior of surface emissivity caused by the heterogeneity of target is discussed. PMID:27879735

Movement-Based VR Gameplay Therapy For A Child With Cerebral Palsy.

PubMed

Stansfield, Sharon; Dennis, Carole; Larin, Hélène; Gallagher, Courtney

2015-01-01

This paper presents a single-subject feasibility study of a motion-based VR game designed to provide benefits similar to constraint-induced movement therapy for children with cerebral palsy, while providing a more enjoyable experience. The game was designed to encourage the child to perform the desired therapeutic movements by allowing him to interact with the game using only his more-affected arm. The study used an AB design: Performance across baseline and intervention phases was assessed to determine whether the intervention resulted in changes to repeated measures. Results of the study showed that compared with baseline measurements done prior to his game experience, the participant's post-intervention performance showed improvement in speed of reach, dissociated movement, and bilateral integration of upper extremities in functional tasks. The child's mother, as well as one of his therapists, reported better performance outside of the study environment as well.

From pattern to process: The strategy of the Earth Observing System: Volume 2: EOS Science Steering Committee report

NASA Technical Reports Server (NTRS)

1987-01-01

The Earth Observing System (EOS) represents a new approach to the study of the Earth. It consists of remotely sensed and correlative in situ observations designed to address important, interrelated global-scale processes. There is an urgent need to study the Earth as a complete, integrated system in order to understand and predict changes caused by human activities and natural processes. The EOS approach is based on an information system concept and designed to provide a long-term study of the Earth using a variety of measurement methods from both operational and research satellite payloads and continuing ground-based Earth science studies. The EOS concept builds on the foundation of the earlier, single-discipline space missions designed for relatively short observation periods. Continued progress in our understanding of the Earth as a system will come from EOS observations spanning several decades using a variety of contemporaneous measurements.

Regression dilution bias: tools for correction methods and sample size calculation.

PubMed

Berglund, Lars

2012-08-01

Random errors in measurement of a risk factor will introduce downward bias of an estimated association to a disease or a disease marker. This phenomenon is called regression dilution bias. A bias correction may be made with data from a validity study or a reliability study. In this article we give a non-technical description of designs of reliability studies with emphasis on selection of individuals for a repeated measurement, assumptions of measurement error models, and correction methods for the slope in a simple linear regression model where the dependent variable is a continuous variable. Also, we describe situations where correction for regression dilution bias is not appropriate. The methods are illustrated with the association between insulin sensitivity measured with the euglycaemic insulin clamp technique and fasting insulin, where measurement of the latter variable carries noticeable random error. We provide software tools for estimation of a corrected slope in a simple linear regression model assuming data for a continuous dependent variable and a continuous risk factor from a main study and an additional measurement of the risk factor in a reliability study. Also, we supply programs for estimation of the number of individuals needed in the reliability study and for choice of its design. Our conclusion is that correction for regression dilution bias is seldom applied in epidemiological studies. This may cause important effects of risk factors with large measurement errors to be neglected.

A pilot cluster randomized controlled trial of structured goal-setting following stroke.

PubMed

Taylor, William J; Brown, Melanie; William, Levack; McPherson, Kathryn M; Reed, Kirk; Dean, Sarah G; Weatherall, Mark

2012-04-01

To determine the feasibility, the cluster design effect and the variance and minimal clinical importance difference in the primary outcome in a pilot study of a structured approach to goal-setting. A cluster randomized controlled trial. Inpatient rehabilitation facilities. People who were admitted to inpatient rehabilitation following stroke who had sufficient cognition to engage in structured goal-setting and complete the primary outcome measure. Structured goal elicitation using the Canadian Occupational Performance Measure. Quality of life at 12 weeks using the Schedule for Individualised Quality of Life (SEIQOL-DW), Functional Independence Measure, Short Form 36 and Patient Perception of Rehabilitation (measuring satisfaction with rehabilitation). Assessors were blinded to the intervention. Four rehabilitation services and 41 patients were randomized. We found high values of the intraclass correlation for the outcome measures (ranging from 0.03 to 0.40) and high variance of the SEIQOL-DW (SD 19.6) in relation to the minimally importance difference of 2.1, leading to impractically large sample size requirements for a cluster randomized design. A cluster randomized design is not a practical means of avoiding contamination effects in studies of inpatient rehabilitation goal-setting. Other techniques for coping with contamination effects are necessary.

Effect of high negative incidence on the performance of a centrifugal compressor stage with conventional vaned diffusers

NASA Astrophysics Data System (ADS)

Jaatinen, Ahti; Grönman, Aki; Turunen-Saaresti, Teemu; Backman, Jari

2011-06-01

Three vaned diffusers, designed to have high negative incidence (-8°) at the design operating point, are studied experimentally. The overall performance (efficiency and pressure ratio) are measured at three rotational speeds, and flow angles before and after the diffuser are measured at the design rotational speed and with three mass flow rates. The results are compared to corresponding results of the original vaneless diffuser design. Attention is paid to the performance at lower mass flows than the design mass flow. The results show that it is possible to improve the performance at mass flows lower than the design mass flow with a vaned diffuser designed with high negative incidence. However, with the vaned diffusers, the compressor still stalls at higher mass flow rates than with the vaneless one. The flow angle distributions after the diffuser are more uniform with the vaned diffusers.

A quality by design approach to understand formulation and process variability in pharmaceutical melt extrusion processes.

PubMed

Patwardhan, Ketaki; Asgarzadeh, Firouz; Dassinger, Thomas; Albers, Jessica; Repka, Michael A

2015-05-01

In this study, the principles of quality by design (QbD) have been uniquely applied to a pharmaceutical melt extrusion process for an immediate release formulation with a low melting model drug, ibuprofen. Two qualitative risk assessment tools - Fishbone diagram and failure mode effect analysis - were utilized to strategically narrow down the most influential parameters. Selected variables were further assessed using a Plackett-Burman screening study, which was upgraded to a response surface design consisting of the critical factors to study the interactions between the study variables. In process torque, glass transition temperature (Tg ) of the extrudates, assay, dissolution and phase change were measured as responses to evaluate the critical quality attributes (CQAs) of the extrudates. The effect of each study variable on the measured responses was analysed using multiple regression for the screening design and partial least squares for the optimization design. Experimental limits for formulation and process parameters to attain optimum processing have been outlined. A design space plot describing the domain of experimental variables within which the CQAs remained unchanged was developed. A comprehensive approach for melt extrusion product development based on the QbD methodology has been demonstrated. Drug loading concentrations between 40- 48%w/w and extrusion temperature in the range of 90-130°C were found to be the most optimum. © 2015 Royal Pharmaceutical Society.

BX90: A new diamond anvil cell design for X-ray diffraction and optical measurements

NASA Astrophysics Data System (ADS)

Kantor, I.; Prakapenka, V.; Kantor, A.; Dera, P.; Kurnosov, A.; Sinogeikin, S.; Dubrovinskaia, N.; Dubrovinsky, L.

2012-12-01

We present a new design of a universal diamond anvil cell, suitable for different kinds of experimental studies under high pressures. Main features of the cell are an ultimate 90-degrees symmetrical axial opening and high stability, making the presented cell design suitable for a whole range of techniques from optical absorption to single-crystal X-ray diffraction studies, also in combination with external resistive or double-side laser heating. Three examples of the cell applications are provided: a Brillouin scattering of neon, single-crystal X-ray diffraction of α-Cr2O3, and resistivity measurements on the (Mg0.60Fe0.40)(Si0.63Al0.37)O3 silicate perovskite.

Social Stories: Mechanisms of Effectiveness in Increasing Game Play Skills in Children Diagnosed with Autism Spectrum Disorder Using a Pretest Posttest Repeated Measures Randomized Control Group Design

ERIC Educational Resources Information Center

Quirmbach, Linda M.; Lincoln, Alan J.; Feinberg-Gizzo, Monica J.; Ingersoll, Brooke R.; Andrews, Siri M.

2009-01-01

An increasing body of literature has indicated that social stories are an effective way to teach individuals diagnosed with autism appropriate social behavior. This study compared two formats of a social story targeting the improvement of social skills during game play using a pretest posttest repeated measures randomized control group design. A…

Designing Non-Cognitive Construct Measures That Improve Mathematics Achievement in Grade 5-6 Learners. A User-Centered Approach

ERIC Educational Resources Information Center

Chatterji, Madhabi; Lin, Meiko

2018-01-01

Purpose: The purpose of this study was to design and iteratively improve the quality of survey-based measures of three non-cognitive constructs for Grade 5-6 students, keeping in mind information needs of users in education reform contexts. The constructs are: Mathematics-related Self-Efficacy, Self-Concept, and Anxiety (M-SE, M-SC, and M-ANX).…

Radial and circumferential flow surveys at the inlet and exit of the Space Shuttle Main Engine High Pressure Fuel Turbine Model

NASA Technical Reports Server (NTRS)

Hudson, S. T.; Bordelon, W. J., Jr.; Smith, A. W.; Ramachandran, N.

1995-01-01

The main objective of this test was to obtain detailed radial and circumferential flow surveys at the inlet and exit of the SSME High Pressure Fuel Turbine model using three-hole cobra probes, hot-film probes, and a laser velocimeter. The test was designed to meet several objectives. First, the techniques for making laser velocimeter, hot-film probe, and cobra probe measurements in turbine flows were developed and demonstrated. The ability to use the cobra probes to obtain static pressure and, therefore, velocity had to be verified; insertion techniques had to be established for the fragile hot-film probes; and a seeding method had to be established for the laser velocimetry. Once the measurement techniques were established, turbine inlet and exit velocity profiles, temperature profiles, pressure profiles, turbulence intensities, and boundary layer thicknesses were measured at the turbine design point. The blockage effect due to the model inlet and exit total pressure and total temperature rakes on the turbine performance was also studied. A small range of off-design points were run to obtain the profiles and to verify the rake blockage effects off-design. Finally, a range of different Reynolds numbers were run to study the effect of Reynolds number on the various measurements.

The Vega balloons - A tool for studying atmosphere dynamics on Venus

NASA Technical Reports Server (NTRS)

Kremnev, R. S.; Selivanov, A. S.; Linkin, V. M.; Lipatov, A. N.; Tarnoruder, I. IA.; Puchkov, V. I.; Kustodiev, V. D.; Shurupov, A. A.; Ragent, B.; Preston, R. A.

1986-01-01

The Vega balloon experiment, designed to measure the dynamics of the Venus atmosphere, comprised the balloons themselves, their gondolas with on-board sensors and radio transmitters, and the radio telescope network on the earth. The structures and the physical parameters of the balloon probe are described, together with the instruments on the gondola, designed for the measurements of the atmospheric pressure, temperature, and vertical wind flows, and illumination, as well as possible flashes of lightning. Consideration is also given to the formatting of the information flow for the individual parameters measured.

Quiet engine program: Turbine noise suppression. -Volume 1: General treatment evaluation and measurement techniques

NASA Technical Reports Server (NTRS)

Clemons, A.; Hehmann, H.; Radecki, K.

1973-01-01

Acoustic treatment was developed for jet engine turbine noise suppression. Acoustic impedance and duct transmission loss measurements were made for various suppression systems. An environmental compatibility study on several material types having suppression characteristics is presented. Two sets of engine hardware were designed and are described along with engine test results which include probe, farfield, near field, and acoustic directional array data. Comparisons of the expected and the measured suppression levels are given as well as a discussion of test results and design techniques.

Parent-reported social support for child’s fruit and vegetable intake: validity of measures

USDA-ARS?s Scientific Manuscript database

The objective of our study was to develop and validate measures of parental social support to increase their child’s fruit and vegetable (FV) consumption. We used a cross-sectional study design by studying participants at school and home. We studied two hundred three parents with at least 1 elemen...

Study Design and Evaluation of Risk Minimization Measures: A Review of Studies Submitted to the European Medicines Agency for Cardiovascular, Endocrinology, and Metabolic Drugs.

PubMed

Mazzaglia, Giampiero; Straus, Sabine M J; Arlett, Peter; da Silva, Daniela; Janssen, Heidi; Raine, June; Alteri, Enrica

2018-02-01

Studies measuring the effectiveness of risk minimization measures (RMMs) submitted by pharmaceutical companies to the European Medicines Agency are part of the post-authorization regulatory requirements and represent an important source of data covering a range of medicinal products and safety-related issues. Their objectives, design, and the associated regulatory outcomes were reviewed, and conclusions were drawn that may support future progress in risk minimization evaluation. Information was obtained from risk management plans, study protocols, clinical study reports, and assessment reports of 157 medicinal products authorized for cardiovascular, endocrinology, and metabolic indications. We selected observational studies measuring, as outcomes of interest, the relationship between the RMMs in place and (1) implementation measures, such as clinical knowledge or physicians` compliance to recommendations contained in the RMMs; and (2) occurrence or reduced severity of the adverse drug reactions for which the RMMs were required. Of 59 eligible studies (24 completed, 35 ongoing), 44 assessed implementation measures, whereas only 15 assessed safety outcomes (1 study as a single endpoint and 14 studies with other endpoints). Fifty-one studies used non-experimental designs and 25 studies employed electronic healthcare databases for analysis. Of the 24 completed studies, 17 were considered satisfactory and supported immediate regulatory decision making, 6 were considered inconclusive and required new evaluations, and 1 was terminated early because new safety restrictions were required, thereby necessitating a new evaluation. Compliance with agreed deadlines was considered acceptable in 21 of 24 completed studies; the average time for a submission was 37 months (standard deviation ± 17), with differences observed by type of data source employed. Three important gaps in the evaluation plans of RMMs were identified: lack of early feedback on implementation, limited evaluation of safety outcomes, and inability to provide information on the effectiveness from an integrated measurement of different elements of a set of risk minimization tools. More robust evidence is needed to advance regulatory science and support more rapid adjustment of risk minimization strategies as needed.

Racial discrimination and cortisol output: A meta-analysis.

PubMed

Korous, Kevin M; Causadias, José M; Casper, Deborah M

2017-11-01

Although the relation between stress and physiology is well documented, attempts at understanding the link between racial discrimination and cortisol output, specifically, have produced mixed results, likely due to study characteristics such as racial/ethnic composition of the samples (e.g., African American, Latino), measures of discrimination, and research design (e.g., cross-sectional, experimental). To estimate the overall association between racial discrimination and cortisol output among racial/ethnic minority individuals and to determine if the association between racial discrimination and cortisol output is moderated by age, race/ethnicity, type of discrimination measure, sex, and research design. Using a random effects model, the overall effect size based on k = 16 studies (19% unpublished) and N = 1506 participants was r¯ = 0.040, 95% CI = -0.038 to 0.117. Studies were conducted predominantly in the U.S. (81%). Notably, experimental studies (r¯ = 0.267) exhibited larger effect sizes compared to non-experimental studies (r¯ = -0.007). Age, race/ethnicity, type of discrimination measure, and sex did not moderate the effect sizes. This meta-analysis provides evidence that the measurement of the association between racial discrimination and cortisol is complex, and it offers valuable insight regarding methods and designs that can inform future research on this topic. Limitations and future directions are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

A CS1 pedagogical approach to parallel thinking

NASA Astrophysics Data System (ADS)

Rague, Brian William

Almost all collegiate programs in Computer Science offer an introductory course in programming primarily devoted to communicating the foundational principles of software design and development. The ACM designates this introduction to computer programming course for first-year students as CS1, during which methodologies for solving problems within a discrete computational context are presented. Logical thinking is highlighted, guided primarily by a sequential approach to algorithm development and made manifest by typically using the latest, commercially successful programming language. In response to the most recent developments in accessible multicore computers, instructors of these introductory classes may wish to include training on how to design workable parallel code. Novel issues arise when programming concurrent applications which can make teaching these concepts to beginning programmers a seemingly formidable task. Student comprehension of design strategies related to parallel systems should be monitored to ensure an effective classroom experience. This research investigated the feasibility of integrating parallel computing concepts into the first-year CS classroom. To quantitatively assess student comprehension of parallel computing, an experimental educational study using a two-factor mixed group design was conducted to evaluate two instructional interventions in addition to a control group: (1) topic lecture only, and (2) topic lecture with laboratory work using a software visualization Parallel Analysis Tool (PAT) specifically designed for this project. A new evaluation instrument developed for this study, the Perceptions of Parallelism Survey (PoPS), was used to measure student learning regarding parallel systems. The results from this educational study show a statistically significant main effect among the repeated measures, implying that student comprehension levels of parallel concepts as measured by the PoPS improve immediately after the delivery of any initial three-week CS1 level module when compared with student comprehension levels just prior to starting the course. Survey results measured during the ninth week of the course reveal that performance levels remained high compared to pre-course performance scores. A second result produced by this study reveals no statistically significant interaction effect between the intervention method and student performance as measured by the evaluation instrument over three separate testing periods. However, visual inspection of survey score trends and the low p-value generated by the interaction analysis (0.062) indicate that further studies may verify improved concept retention levels for the lecture w/PAT group.

Methods for measuring populations of small, diurnal forest birds.

Treesearch

D.A. Manuwal; A.B. Carey

1991-01-01

Before a bird population is measured, the objectives of the study should be clearly defined. Important factors to be considered in designing a study are study site selection, plot size or transect length, distance between sampling points, duration of counts, and frequency and timing of sampling. Qualified field personnel are especially important. Assumptions applying...

Measuring and Supporting Pre-Service Teachers' Self-Efficacy towards Computers, Teaching, and Technology Integration

ERIC Educational Resources Information Center

Killi, Carita; Kauppinen, Merja; Coiro, Julie; Utriainen, Jukka

2016-01-01

This paper reports on two studies designed to examine pre-service teachers' self-efficacy beliefs. Study I investigated the measurement properties of a self-efficacy beliefs questionnaire comprising scales for computer self-efficacy, teacher self-efficacy, and self-efficacy towards technology integration. In Study I, 200 pre-service teachers…

The study design elements employed by researchers in preclinical animal experiments from two research domains and implications for automation of systematic reviews.

PubMed

O'Connor, Annette M; Totton, Sarah C; Cullen, Jonah N; Ramezani, Mahmood; Kalivarapu, Vijay; Yuan, Chaohui; Gilbert, Stephen B

2018-01-01

Systematic reviews are increasingly using data from preclinical animal experiments in evidence networks. Further, there are ever-increasing efforts to automate aspects of the systematic review process. When assessing systematic bias and unit-of-analysis errors in preclinical experiments, it is critical to understand the study design elements employed by investigators. Such information can also inform prioritization of automation efforts that allow the identification of the most common issues. The aim of this study was to identify the design elements used by investigators in preclinical research in order to inform unique aspects of assessment of bias and error in preclinical research. Using 100 preclinical experiments each related to brain trauma and toxicology, we assessed design elements described by the investigators. We evaluated Methods and Materials sections of reports for descriptions of the following design elements: 1) use of comparison group, 2) unit of allocation of the interventions to study units, 3) arrangement of factors, 4) method of factor allocation to study units, 5) concealment of the factors during allocation and outcome assessment, 6) independence of study units, and 7) nature of factors. Many investigators reported using design elements that suggested the potential for unit-of-analysis errors, i.e., descriptions of repeated measurements of the outcome (94/200) and descriptions of potential for pseudo-replication (99/200). Use of complex factor arrangements was common, with 112 experiments using some form of factorial design (complete, incomplete or split-plot-like). In the toxicology dataset, 20 of the 100 experiments appeared to use a split-plot-like design, although no investigators used this term. The common use of repeated measures and factorial designs means understanding bias and error in preclinical experimental design might require greater expertise than simple parallel designs. Similarly, use of complex factor arrangements creates novel challenges for accurate automation of data extraction and bias and error assessment in preclinical experiments.

75 FR 75477 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-03

... potential pharmaceutical options (OMB control no. 0910-0649). Design Overview This study will be conducted.... This design will allow us to compare consumers' perceptions of efficacy with a more objective measure... completely balanced design would also include a negative framing condition (which would provide only the...

Academic Preparedness as a Predictor of Achievement in an Engineering Design Challenge

ERIC Educational Resources Information Center

Mentzer, Nathan; Becker, Kurt

2010-01-01

The purpose of this study was to determine if a student's academic success, measured by grade point average (GPA) in mathematics, science, and communication courses, is correlated with student change in achievement during an engineering design challenge. Engineering design challenges have been implemented and researched in K-16 environments where…

Efficient Bayesian experimental design for contaminant source identification

NASA Astrophysics Data System (ADS)

Zhang, Jiangjiang; Zeng, Lingzao; Chen, Cheng; Chen, Dingjiang; Wu, Laosheng

2015-01-01

In this study, an efficient full Bayesian approach is developed for the optimal sampling well location design and source parameters identification of groundwater contaminants. An information measure, i.e., the relative entropy, is employed to quantify the information gain from concentration measurements in identifying unknown parameters. In this approach, the sampling locations that give the maximum expected relative entropy are selected as the optimal design. After the sampling locations are determined, a Bayesian approach based on Markov Chain Monte Carlo (MCMC) is used to estimate unknown parameters. In both the design and estimation, the contaminant transport equation is required to be solved many times to evaluate the likelihood. To reduce the computational burden, an interpolation method based on the adaptive sparse grid is utilized to construct a surrogate for the contaminant transport equation. The approximated likelihood can be evaluated directly from the surrogate, which greatly accelerates the design and estimation process. The accuracy and efficiency of our approach are demonstrated through numerical case studies. It is shown that the methods can be used to assist in both single sampling location and monitoring network design for contaminant source identifications in groundwater.

Ten different hip resurfacing systems: biomechanical analysis of design and material properties.

PubMed

Heisel, Christian; Kleinhans, Jennifer A; Menge, Michael; Kretzer, Jan Philippe

2009-08-01

This study gives an overview of the main macro- and microstructural differences of ten commercially available total hip resurfacing implants. The heads and cups of resurfacing hip implants from ten different manufacturers were analysed. The components were measured in a coordinate measuring machine. The microstructure of the heads and cups was inspected by scanning electron microscopy. The mean radial clearance was 84.86 microm (range: 49.47-120.93 microm). The implants were classified into three groups (low, medium and high clearance). All implants showed a deviation of roundness of less than 10 microm. It was shown that all implants differ from each other and a final conclusion about the ideal design and material combination cannot be given based on biomechanical data. Widespread use of specific designs can only be recommended if clinical long-term follow-up studies are performed and analysed for each design.

A time projection chamber for high accuracy and precision fission cross-section measurements

DOE PAGES

Heffner, M.; Asner, D. M.; Baker, R. G.; ...

2014-05-22

The fission Time Projection Chamber (fissionTPC) is a compact (15 cm diameter) two-chamber MICROMEGAS TPC designed to make precision cross-section measurements of neutron-induced fission. The actinide targets are placed on the central cathode and irradiated with a neutron beam that passes axially through the TPC inducing fission in the target. The 4π acceptance for fission fragments and complete charged particle track reconstruction are powerful features of the fissionTPC which will be used to measure fission cross-sections and examine the associated systematic errors. This study provides a detailed description of the design requirements, the design solutions, and the initial performance ofmore » the fissionTPC.« less

Reporting What Readers Need to Know about Education Research Measures: A Guide. REL 2014-064

ERIC Educational Resources Information Center

Boller, Kimberly; Kisker, Ellen Eliason

2014-01-01

This guide is designed to help researchers make sure that their research reports include enough information about study measures so that readers can assess the quality of the study's methods and results. The guide also provides examples of write-ups about measures and suggests resources for learning more about these topics. The guide assumes…

The measurement of place attachment: validity and generalizability of a psychometric approach

Treesearch

Daniel R. Williams; Jerry J. Vaske

2003-01-01

To enhance land managers’ ability to address deeper landscape meanings and place-specific symbolic values in natural resource decision making, this study evaluated the psychometric properties of a place attachment measure designed to capture the extent of emotions and feelings people have for places. Building on previous measurement efforts, this study examined the...

Technical Adequacy of Curriculum-Based Measures of Vocabulary Growth for Preschool English Language Learners

ERIC Educational Resources Information Center

VanTol, Kathleen M.

2009-01-01

The purpose of this study was to design and establish the technical adequacy of curriculum-based measures (CBMs) of vocabulary acquisition for use with preschool children. This study sought to establish the technical adequacy of two tools that can be used for measuring benchmarks of vocabulary acquisition for both native English speakers and for…

Quality of College Life (QCL) of Students: Further Validation of a Measure of Well-Being

ERIC Educational Resources Information Center

Sirgy, M. Joseph; Lee, Dong-Jin; Grzeskowiak, Stephan; Yu, Grace B.; Webb, Dave; El-Hasan, Karma; Vega, Jose Jesus Garcia; Ekici, Ahmet; Johar, J. S.; Krishen, Anjala; Kangal, Ayca; Swoboda, Bernhard; Claiborne, C. B.; Maggino, Filomena; Rahtz, Don; Canton, Alicia; Kuruuzum, Ayse

2010-01-01

This paper reports a study designed to further validate a measure of quality of college life (QCL) of university students (Sirgy, Grzeskowiak, Rahtz, "Soc Indic Res" 80(2), 343-360, 2007). Two studies were conducted: a replication study and an extension study. The replication study involved surveys of 10 different college campuses in different…

Evaluating disease management programme effectiveness: an introduction to the regression discontinuity design.

PubMed

Linden, Ariel; Adams, John L; Roberts, Nancy

2006-04-01

Although disease management (DM) has been in existence for over a decade, there is still much uncertainty as to its effectiveness in improving health status and reducing medical cost. The main reason is that most programme evaluations typically follow weak observational study designs that are subject to bias, most notably selection bias and regression to the mean. The regression discontinuity (RD) design may be the best alternative to randomized studies for evaluating DM programme effectiveness. The most crucial element of the RD design is its use of a 'cut-off' score on a pre-test measure to determine assignment to intervention or control. A valuable feature of this technique is that the pre-test measure does not have to be the same as the outcome measure, thus maximizing the programme's ability to use research-based practice guidelines, survey instruments and other tools to identify those individuals in greatest need of the programme intervention. Similarly, the cut-off score can be based on clinical understanding of the disease process, empirically derived, or resource-based. In the RD design, programme effectiveness is determined by a change in the pre-post relationship at the cut-off point. While the RD design is uniquely suitable for DM programme evaluation, its success will depend, in large part, on fundamental changes being made in the way DM programmes identify and assign individuals to the programme intervention.

A systematic review of the extent and measurement of healthcare provider racism.

PubMed

Paradies, Yin; Truong, Mandy; Priest, Naomi

2014-02-01

Although considered a key driver of racial disparities in healthcare, relatively little is known about the extent of interpersonal racism perpetrated by healthcare providers, nor is there a good understanding of how best to measure such racism. This paper reviews worldwide evidence (from 1995 onwards) for racism among healthcare providers; as well as comparing existing measurement approaches to emerging best practice, it focuses on the assessment of interpersonal racism, rather than internalized or systemic/institutional racism. The following databases and electronic journal collections were searched for articles published between 1995 and 2012: Medline, CINAHL, PsycInfo, Sociological Abstracts. Included studies were published empirical studies of any design measuring and/or reporting on healthcare provider racism in the English language. Data on study design and objectives; method of measurement, constructs measured, type of tool; study population and healthcare setting; country and language of study; and study outcomes were extracted from each study. The 37 studies included in this review were almost solely conducted in the U.S. and with physicians. Statistically significant evidence of racist beliefs, emotions or practices among healthcare providers in relation to minority groups was evident in 26 of these studies. Although a number of measurement approaches were utilized, a limited range of constructs was assessed. Despite burgeoning interest in racism as a contributor to racial disparities in healthcare, we still know little about the extent of healthcare provider racism or how best to measure it. Studies using more sophisticated approaches to assess healthcare provider racism are required to inform interventions aimed at reducing racial disparities in health.

Best Practices in the Design of Aerobic Training Programs

DTIC Science & Technology

2010-03-02

a pretest - posttest design. To determine the effect size due to training, estimates of the training response were adjusted for the type of research ...studies reviewed here employed pretest - posttest research designs. In such cases, the correlation of pretest scores with posttest scores affects the... pretest - posttest correlation (see Appendix A). was measured more than twice in some studies. When this was the case, ES was computed using the initial and

Designing Intervention Studies: Selected Populations, Range Restrictions, and Statistical Power

ERIC Educational Resources Information Center

Miciak, Jeremy; Taylor, W. Pat; Stuebing, Karla K.; Fletcher, Jack M.; Vaughn, Sharon

2016-01-01

An appropriate estimate of statistical power is critical for the design of intervention studies. Although the inclusion of a pretest covariate in the test of the primary outcome can increase statistical power, samples selected on the basis of pretest performance may demonstrate range restriction on the selection measure and other correlated…

Design Difficulties in Stand Density Studies

Treesearch

Frank A. Bennett

1969-01-01

Designing unbiased stand density studies is difficult. An acceptable sample requires stratification of the plots of age, site, and density. When basal area, percent stocking, or Reineke's stand density index is used as the density measure, this stratification forces a high negative correlation between site and number of trees per acre. Mortality in trees per acre...

76 FR 23609 - New Proposed Collection; Comment Request; Biospecimen and Physical Measures Formative Research...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... has obtained an OMB generic clearance to conduct survey and instrument design and administration... conduct the detailed preparation needed for a study of this size and complexity, the NCS was designed to... methodological studies conducted during the Vanguard phase will inform the implementation and analysis plan for...

The Development of Practical Item Analysis Program for Indonesian Teachers

ERIC Educational Resources Information Center

Muhson, Ali; Lestari, Barkah; Supriyanto; Baroroh, Kiromim

2017-01-01

Item analysis has essential roles in the learning assessment. The item analysis program is designed to measure student achievement and instructional effectiveness. This study was aimed to develop item-analysis program and verify its feasibility. This study uses a Research and Development (R & D) model. The procedure includes designing and…

An Experimental Study of Interventions for the Acquisition and Retention of Motivational Interviewing Skills among Probation Officers

ERIC Educational Resources Information Center

Asteris, Mark M., Jr.

2012-01-01

This study was designed to investigate the differences in Motivational Interviewing (MI) skill acquisition and retention among probation officers. This study had a randomized, experimental, pretest-posttest control group design using the MITI 3.1.1 and the VASE-R to measure MI skill acquisition and retention. A random sample (n = 24) of probation…

Design of Control Software for a High-Speed Coherent Doppler Lidar System for CO2 Measurement

NASA Technical Reports Server (NTRS)

Vanvalkenburg, Randal L.; Beyon, Jeffrey Y.; Koch, Grady J.; Yu, Jirong; Singh, Upendra N.; Kavaya, Michael J.

2010-01-01

The design of the software for a 2-micron coherent high-speed Doppler lidar system for CO2 measurement at NASA Langley Research Center is discussed in this paper. The specific strategy and design topology to meet the requirements of the system are reviewed. In order to attain the high-speed digitization of the different types of signals to be sampled on multiple channels, a carefully planned design of the control software is imperative. Samples of digitized data from each channel and their roles in data analysis post processing are also presented. Several challenges of extremely-fast, high volume data acquisition are discussed. The software must check the validity of each lidar return as well as other monitoring channel data in real-time. For such high-speed data acquisition systems, the software is a key component that enables the entire scope of CO2 measurement studies using commercially available system components.

The Missing Treatment Design Element: Continuity of Treatment When Multiple Postobservations Are Used in Time-Series and Repeated Measures Study Designs

ERIC Educational Resources Information Center

Barnette, J. Jackson; Wallis, Anne Baber

2005-01-01

We rely a great deal on the schematic descriptions that represent experimental and quasi-experimental design arrangements, as well as the discussions of threats to validity associated with these, provided by Campbell and his associates: Stanley, Cook, and Shadish. Some of these designs include descriptions of treatments removed, removed and then…

Methodological considerations in the design and implementation of clinical trials.

PubMed

Cirrincione, Constance T; Lavoie Smith, Ellen M; Pang, Herbert

2014-02-01

To review study design issues related to clinical trials led by oncology nurses, with special attention to those conducted within the cooperative group setting; to emphasize the importance of the statistician's role in the process of clinical trials. Studies available at clinicaltrials.gov using experimental designs that have been published in peer-reviewed journals; cooperative group trials are highlighted. The clinical trial is a primary means to test intervention efficacy. A properly designed and powered study with clear and measurable objectives is as important as the intervention itself. Collaboration among the study team, including the statistician, is central in developing and conducting appropriately designed studies. For optimal results, collaboration is an ongoing process that should begin early on. Copyright © 2014 Elsevier Inc. All rights reserved.

Optimal experimental designs for estimating Henry's law constants via the method of phase ratio variation.

PubMed

Kapelner, Adam; Krieger, Abba; Blanford, William J

2016-10-14

When measuring Henry's law constants (k H ) using the phase ratio variation (PRV) method via headspace gas chromatography (G C ), the value of k H of the compound under investigation is calculated from the ratio of the slope to the intercept of a linear regression of the inverse G C response versus the ratio of gas to liquid volumes of a series of vials drawn from the same parent solution. Thus, an experimenter collects measurements consisting of the independent variable (the gas/liquid volume ratio) and dependent variable (the G C -1 peak area). A review of the literature found that the common design is a simple uniform spacing of liquid volumes. We present an optimal experimental design which estimates k H with minimum error and provides multiple means for building confidence intervals for such estimates. We illustrate performance improvements of our design with an example measuring the k H for Naphthalene in aqueous solution as well as simulations on previous studies. Our designs are most applicable after a trial run defines the linear G C response and the linear phase ratio to the G C -1 region (where the PRV method is suitable) after which a practitioner can collect measurements in bulk. The designs can be easily computed using our open source software optDesignSlopeInt, an R package on CRAN. Copyright © 2016 Elsevier B.V. All rights reserved.

Investigation of hydraulic transmission noise sources

NASA Astrophysics Data System (ADS)

Klop, Richard J.

Advanced hydrostatic transmissions and hydraulic hybrids show potential in new market segments such as commercial vehicles and passenger cars. Such new applications regard low noise generation as a high priority, thus, demanding new quiet hydrostatic transmission designs. In this thesis, the aim is to investigate noise sources of hydrostatic transmissions to discover strategies for designing compact and quiet solutions. A model has been developed to capture the interaction of a pump and motor working in a hydrostatic transmission and to predict overall noise sources. This model allows a designer to compare noise sources for various configurations and to design compact and inherently quiet solutions. The model describes dynamics of the system by coupling lumped parameter pump and motor models with a one-dimensional unsteady compressible transmission line model. The model has been verified with dynamic pressure measurements in the line over a wide operating range for several system structures. Simulation studies were performed illustrating sensitivities of several design variables and the potential of the model to design transmissions with minimal noise sources. A semi-anechoic chamber has been designed and constructed suitable for sound intensity measurements that can be used to derive sound power. Measurements proved the potential to reduce audible noise by predicting and reducing both noise sources. Sound power measurements were conducted on a series hybrid transmission test bench to validate the model and compare predicted noise sources with sound power.

The effects of topic choice in project-based instruction on undergraduate physical science students' interest, ownership, and motivation

NASA Astrophysics Data System (ADS)

Milner-Bolotin, Marina

2001-07-01

Motivating nonscience majors in science and mathematics studies became one of the most interesting and important challenges in contemporary science and mathematics education. Therefore, designing and studying a learning environment, which enhances students' motivation, is an important task. This experimental study sought to explore the implications of student autonomy in topic choice in a project-based Physical Science Course for nonscience majors' on students' motivational orientation. It also suggested and tested a model explaining motivational outcomes of project-based learning environment through increased student ownership of science projects. A project, How Things Work, was designed and implemented in this study. The focus of the project was application of physical science concepts learned in the classroom to everyday life situations. Participants of the study (N = 59) were students enrolled in three selected sections of a Physical Science Course, designed to fulfill science requirements for nonscience majors. These sections were taught by the same instructor over a period of an entire 16-week semester at a large public research university. The study focused on four main variables: student autonomy in choosing a project topic, their motivational orientation, student ownership of the project, and the interest in the project topic. Achievement Goal Orientation theory became the theoretical framework for the study. Student motivational orientation, defined as mastery or performance goal orientation, was measured by an Achievement Goal Orientation Questionnaire. Student ownership was measured using an original instrument, Ownership Measurement Questionnaire, designed and tested by the researchers. Repeated measures yoked design, ANOVA, ANCOVA, and multivariate regression analysis were implemented in the study. Qualitative analysis was used to complement and verify quantitative results. It has been found that student autonomy in the project choice did not make a significant impact on their motivational orientation, while their initial interest in the project topic did. The latter was found to be related to students' ownership of the project, which was found to lead to improved mastery goal orientation. These findings indicate that incorporating project-based learning in science teaching may lead to increased student mastery goal orientation, and may result in improved science learning.

Design approaches to experimental mediation☆

PubMed Central

Pirlott, Angela G.; MacKinnon, David P.

2016-01-01

Identifying causal mechanisms has become a cornerstone of experimental social psychology, and editors in top social psychology journals champion the use of mediation methods, particularly innovative ones when possible (e.g. Halberstadt, 2010, Smith, 2012). Commonly, studies in experimental social psychology randomly assign participants to levels of the independent variable and measure the mediating and dependent variables, and the mediator is assumed to causally affect the dependent variable. However, participants are not randomly assigned to levels of the mediating variable(s), i.e., the relationship between the mediating and dependent variables is correlational. Although researchers likely know that correlational studies pose a risk of confounding, this problem seems forgotten when thinking about experimental designs randomly assigning participants to levels of the independent variable and measuring the mediator (i.e., “measurement-of-mediation” designs). Experimentally manipulating the mediator provides an approach to solving these problems, yet these methods contain their own set of challenges (e.g., Bullock, Green, & Ha, 2010). We describe types of experimental manipulations targeting the mediator (manipulations demonstrating a causal effect of the mediator on the dependent variable and manipulations targeting the strength of the causal effect of the mediator) and types of experimental designs (double randomization, concurrent double randomization, and parallel), provide published examples of the designs, and discuss the strengths and challenges of each design. Therefore, the goals of this paper include providing a practical guide to manipulation-of-mediator designs in light of their challenges and encouraging researchers to use more rigorous approaches to mediation because manipulation-of-mediator designs strengthen the ability to infer causality of the mediating variable on the dependent variable. PMID:27570259

Design approaches to experimental mediation.

PubMed

Pirlott, Angela G; MacKinnon, David P

2016-09-01

Identifying causal mechanisms has become a cornerstone of experimental social psychology, and editors in top social psychology journals champion the use of mediation methods, particularly innovative ones when possible (e.g. Halberstadt, 2010, Smith, 2012). Commonly, studies in experimental social psychology randomly assign participants to levels of the independent variable and measure the mediating and dependent variables, and the mediator is assumed to causally affect the dependent variable. However, participants are not randomly assigned to levels of the mediating variable(s), i.e., the relationship between the mediating and dependent variables is correlational. Although researchers likely know that correlational studies pose a risk of confounding, this problem seems forgotten when thinking about experimental designs randomly assigning participants to levels of the independent variable and measuring the mediator (i.e., "measurement-of-mediation" designs). Experimentally manipulating the mediator provides an approach to solving these problems, yet these methods contain their own set of challenges (e.g., Bullock, Green, & Ha, 2010). We describe types of experimental manipulations targeting the mediator (manipulations demonstrating a causal effect of the mediator on the dependent variable and manipulations targeting the strength of the causal effect of the mediator) and types of experimental designs (double randomization, concurrent double randomization, and parallel), provide published examples of the designs, and discuss the strengths and challenges of each design. Therefore, the goals of this paper include providing a practical guide to manipulation-of-mediator designs in light of their challenges and encouraging researchers to use more rigorous approaches to mediation because manipulation-of-mediator designs strengthen the ability to infer causality of the mediating variable on the dependent variable.

Reliability and Validity of Survey Instruments to Measure Work-Related Fatigue in the Emergency Medical Services Setting: A Systematic Review

DOT National Transportation Integrated Search

2018-01-11

Background: This study sought to systematically search the literature to identify reliable and valid survey instruments for fatigue measurement in the Emergency Medical Services (EMS) occupational setting. Methods: A systematic review study design wa...

Measuring Attitudes toward Acceptable and Unacceptable Parenting Practices

ERIC Educational Resources Information Center

Budd, Karen S.; Behling, Steven; Li, Yan; Parikshak, Sangeeta; Gershenson, Rachel A.; Feuer, Rachel; Danko, Christina M.

2012-01-01

This study investigated the properties of a new rating instrument, the Parenting Questionnaire (PQ), designed to measure attitudes about acceptable and unacceptable parenting practices. In Study 1, subject matter experts representing culturally diverse psychologists, parents, and college students were consulted to identify 110 items receiving high…

Refining Field Measurements of Methane Flux Rates from Abandoned Oil and Gas Wells

NASA Astrophysics Data System (ADS)

Lagron, C. S.; Kang, M.; Riqueros, N. S.; Jackson, R. B.

2015-12-01

Recent studies in Pennsylvania demonstrate the potential for significant methane emissions from abandoned oil and gas wells. A subset of tested wells was high emitting, with methane flux rates up to seven orders of magnitude greater than natural fluxes (up to 105 mg CH4/hour, or about 2.5LPM). These wells contribute disproportionately to the total methane emissions from abandoned oil and gas wells. The principles guiding the chamber design have been developed for lower flux rates, typically found in natural environments, and chamber design modifications may reduce uncertainty in flux rates associated with high-emitting wells. Kang et al. estimate errors of a factor of two in measured values based on previous studies. We conduct controlled releases of methane to refine error estimates and improve chamber design with a focus on high-emitters. Controlled releases of methane are conducted at 0.05 LPM, 0.50 LPM, 1.0 LPM, 2.0 LPM, 3.0 LPM, and 5.0 LPM, and at two chamber dimensions typically used in field measurements studies of abandoned wells. As most sources of error tabulated by Kang et al. tend to bias the results toward underreporting of methane emissions, a flux-targeted chamber design modification can reduce error margins and/or provide grounds for a potential upward revision of emission estimates.

Further Development of Measures of Early Math Performance for Preschoolers

ERIC Educational Resources Information Center

VanDerHeyden, Amanda M.; Broussard, Carmen; Cooley, Amanda

2006-01-01

The purpose of this study was to examine the progress monitoring and screening accuracy for a set of curriculum-based measures (CBM) of early mathematics skills. Measures included counting objects, selecting numbers, naming numbers, counting, and visual discrimination. Measures were designed to be administered with preschoolers in a short period…

Models in the Design and Validation of Eddy Current Inspection for Cracking in the Shuttle Reaction Control System Thruster

NASA Technical Reports Server (NTRS)

Aldrin, John C.; Williams, Phillip A.; Wincheski, Russell (Buzz) A.

2008-01-01

A case study is presented for using models in eddy current NDE design for crack detection in Shuttle Reaction Control System thruster components. Numerical methods were used to address the complex geometry of the part and perform parametric studies of potential transducer designs. Simulations were found to show agreement with experimental results. Accurate representation of the coherent noise associated with the measurement and part geometry was found to be critical to properly evaluate the best probe designs.

Statistical aspects of quantitative real-time PCR experiment design.

PubMed

Kitchen, Robert R; Kubista, Mikael; Tichopad, Ales

2010-04-01

Experiments using quantitative real-time PCR to test hypotheses are limited by technical and biological variability; we seek to minimise sources of confounding variability through optimum use of biological and technical replicates. The quality of an experiment design is commonly assessed by calculating its prospective power. Such calculations rely on knowledge of the expected variances of the measurements of each group of samples and the magnitude of the treatment effect; the estimation of which is often uninformed and unreliable. Here we introduce a method that exploits a small pilot study to estimate the biological and technical variances in order to improve the design of a subsequent large experiment. We measure the variance contributions at several 'levels' of the experiment design and provide a means of using this information to predict both the total variance and the prospective power of the assay. A validation of the method is provided through a variance analysis of representative genes in several bovine tissue-types. We also discuss the effect of normalisation to a reference gene in terms of the measured variance components of the gene of interest. Finally, we describe a software implementation of these methods, powerNest, that gives the user the opportunity to input data from a pilot study and interactively modify the design of the assay. The software automatically calculates expected variances, statistical power, and optimal design of the larger experiment. powerNest enables the researcher to minimise the total confounding variance and maximise prospective power for a specified maximum cost for the large study. Copyright 2010 Elsevier Inc. All rights reserved.

Design and Construction of Field Reversed Configuration Plasma Chamber for Plasma Material Interaction Studies

NASA Astrophysics Data System (ADS)

Smith, DuWayne L.

A Field Reversed Configuration (FRC) plasma source was designed and constructed to conduct high energy plasma-materials interaction studies. The purpose of these studies is the development of advanced materials for use in plasma based electric propulsion systems and nuclear fusion containment vessels. Outlined within this thesis is the basic concept of FRC plasmoid creation, an overview of the device design and integration of various diagnostics systems for plasma conditions and characterization, discussion on the variety of material defects resulting from the plasma exposure with methods and tools designed for characterization. Using a Michelson interferometer it was determined that the FRC plasma densities are on the order of ~1021 m-3. A novel dynamic pressure probe was created to measure ion velocities averaging 300 km/s. Compensating flux loop arrays were used to measure magnetic field strength and verify the existence of the FRC plasmoid and when used in combination with density measurements it was determined that the average ion temperatures are ~130 eV. X-ray Photoelectron Spectroscopy (XPS) was employed as a means of characterizing the size and shape of the plasma jet in the sample exposure positions. SEM results from preliminary studies reveal significant morphological changes on plasma facing material surfaces, and use of XRD to elucidate fuel gas-ion implantation strain rates correlated to plasma exposure energies.

Geoscience Laser Ranging System design and performance predictions

NASA Technical Reports Server (NTRS)

Anderson, Kent L.

1991-01-01

The Geoscience Laser System (GLRS) will be a high-precision distance-measuring instrument planned for deployment on the EOS-B platform. Its primary objectives are to perform ranging measurements to ground targets to monitor crustal deformation and tectonic plate motions, and nadir-looking altimetry to determine ice sheet thicknesses, surface topography, and vertical profiles of clouds and aerosols. The system uses a mode-locked, 3-color Nd:YAG laser source, a Microchannel Plate-PMT for absolute time-of-flight (TOF) measurement (at 532 nm), a streak camera for TOF 2-color dispersion measurement (532 nm and 355 nm), and a Si avalanche photodiode for altimeter waveform detection (1064 nm). The performance goals are to make ranging measurements to ground targets with about 1 cm accuracy, and altimetry height measurements over ice with 10 cm accuracy. This paper presents an overview of the design concept developed during a phase B study. System engineering issues and trade studies are discussed, with particular attention to error budgets and performance predictions.

Using Extractive FTIR to Measure N2O from Medium Heavy ...

EPA Pesticide Factsheets

This pilot project was designed to confirm that an FTIR could generate useful real-time data for non-regulated tailpipe emissions of concern to the EPA. This ability to generate useful modal data could be demonstrated if the mode shapes of regulated emissions measured by reference methods corroborated the mode shapes generated by the FTIR. For this purpose comparisons were to be made to CO2 and NOx. The purpose of this study was to determine whether the FTIR could be useful in better understanding the conditions under which N2O was emitted from the tailpipe. The study was designed to see whether there was correlation of the CO2 and NOx emissions as measured by CEMs and measured by the FTIR as well as the mode shapes of the real time data

Modeling studies for a Mars penetrator heat flow measurement

NASA Technical Reports Server (NTRS)

Keihm, S. J.; Langseth, M. G.

1976-01-01

There were, two different design concepts considered for the purpose of measuring heat flow as part of a Mars penetrator mission. The first of the tentative designs utilizes temperature sensors emplaced along the trailing umbilicus at regularly spaced intervals, no greater than 1m, which is thermally coupled to the adjacent regolith radiatively and possibly convectively or conductively. The second of the heat flow designs considered requires the radial deployment of two or more low thermal mass temperature sensors outward from the penetrator body over a vertical (depth) range on the order of 1m.

Wear measurement of dental tissues and materials in clinical studies: A systematic review.

PubMed

Wulfman, C; Koenig, V; Mainjot, A K

2018-06-01

This study aims to systematically review the different methods used for wear measurement of dental tissues and materials in clinical studies, their relevance and reliability in terms of accuracy and precision, and the performance of the different steps of the workflow taken independently. An exhaustive search of clinical studies related to wear of dental tissues and materials reporting a quantitative measurement method was conducted. MedLine, Embase, Scopus, Cochrane Library and Web of Science databases were used. Prospective studies, pilot studies and case series (>10 patients), as long as they contained a description of wear measurement methodology. Only studies published after 1995 were considered. After duplicates' removal, 495 studies were identified, and 41 remained for quantitative analysis. Thirty-four described wear-measurement protocols, using digital profilometry and superimposition, whereas 7 used alternative protocols. A specific form was designed to analyze the risk of bias. The methods were described in terms of material analyzed; study design; device used for surface acquisition; matching software details and settings; type of analysis (vertical height-loss measurement vs volume loss measurement); type of area investigated (entire occlusal area or selective areas); and results. There is a need of standardization of clinical wear measurement. Current methods exhibit accuracy, which is not sufficient to monitor wear of restorative materials and tooth tissues. Their performance could be improved, notably limiting the use of replicas, using standardized calibration procedures and positive controls, optimizing the settings of scanners and matching softwares, and taking into account unusable data. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.

Population Fisher information matrix and optimal design of discrete data responses in population pharmacodynamic experiments.

PubMed

Ogungbenro, Kayode; Aarons, Leon

2011-08-01

In the recent years, interest in the application of experimental design theory to population pharmacokinetic (PK) and pharmacodynamic (PD) experiments has increased. The aim is to improve the efficiency and the precision with which parameters are estimated during data analysis and sometimes to increase the power and reduce the sample size required for hypothesis testing. The population Fisher information matrix (PFIM) has been described for uniresponse and multiresponse population PK experiments for design evaluation and optimisation. Despite these developments and availability of tools for optimal design of population PK and PD experiments much of the effort has been focused on repeated continuous variable measurements with less work being done on repeated discrete type measurements. Discrete data arise mainly in PDs e.g. ordinal, nominal, dichotomous or count measurements. This paper implements expressions for the PFIM for repeated ordinal, dichotomous and count measurements based on analysis by a mixed-effects modelling technique. Three simulation studies were used to investigate the performance of the expressions. Example 1 is based on repeated dichotomous measurements, Example 2 is based on repeated count measurements and Example 3 is based on repeated ordinal measurements. Data simulated in MATLAB were analysed using NONMEM (Laplace method) and the glmmML package in R (Laplace and adaptive Gauss-Hermite quadrature methods). The results obtained for Examples 1 and 2 showed good agreement between the relative standard errors obtained using the PFIM and simulations. The results obtained for Example 3 showed the importance of sampling at the most informative time points. Implementation of these expressions will provide the opportunity for efficient design of population PD experiments that involve discrete type data through design evaluation and optimisation.

A framework for the meta-analysis of Bland-Altman studies based on a limits of agreement approach.

PubMed

Tipton, Elizabeth; Shuster, Jonathan

2017-10-15

Bland-Altman method comparison studies are common in the medical sciences and are used to compare a new measure to a gold-standard (often costlier or more invasive) measure. The distribution of these differences is summarized by two statistics, the 'bias' and standard deviation, and these measures are combined to provide estimates of the limits of agreement (LoA). When these LoA are within the bounds of clinically insignificant differences, the new non-invasive measure is preferred. Very often, multiple Bland-Altman studies have been conducted comparing the same two measures, and random-effects meta-analysis provides a means to pool these estimates. We provide a framework for the meta-analysis of Bland-Altman studies, including methods for estimating the LoA and measures of uncertainty (i.e., confidence intervals). Importantly, these LoA are likely to be wider than those typically reported in Bland-Altman meta-analyses. Frequently, Bland-Altman studies report results based on repeated measures designs but do not properly adjust for this design in the analysis. Meta-analyses of Bland-Altman studies frequently exclude these studies for this reason. We provide a meta-analytic approach that allows inclusion of estimates from these studies. This includes adjustments to the estimate of the standard deviation and a method for pooling the estimates based upon robust variance estimation. An example is included based on a previously published meta-analysis. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Comparing electronic probes for volumetric water content of low-density feathermoss

USGS Publications Warehouse

Overduin, P.P.; Yoshikawa, K.; Kane, D.L.; Harden, J.W.

2005-01-01

Purpose - Feathermoss is ubiquitous in the boreal forest and across various land-cover types of the arctic and subarctic. A variety of affordable commercial sensors for soil moisture content measurement have recently become available and are in use in such regions, often in conjunction with fire-susceptibility or ecological studies. Few come supplied with calibrations suitable or suggested for soils high in organics. Aims to test seven of these sensors for use in feathermoss, seeking calibrations between sensor output and volumetric water content. Design/methodology/approach - Measurements from seven sensors installed in live, dead and burned feathermoss samples, drying in a controlled manner, were compared to moisture content measurements. Empirical calibrations of sensor output to water content were determined. Findings - Almost all of the sensors tested were suitable for measuring the moss sample water content, and a unique calibration for each sensor for this material is presented. Differences in sensor design lead to changes in sensitivity as a function of volumetric water content, affecting the spatial averaging over the soil measurement volume. Research limitations/implications - The wide range of electromagnetic sensors available include frequency and time domain designs with variations in wave guide and sensor geometry, the location of sensor electronics and operating frequency. Practical implications - This study provides information for extending the use of electromagnetic sensors to feathermoss. Originality/value - A comparison of volumetric water content sensor mechanics and design is of general interest to researchers measuring soil water content. In particular, researchers working in wetlands, boreal forests and tundra regions will be able to apply these results. ?? Emerald Group Publishing Limited.

Self-report and long-term field measures of MP3 player use: how accurate is self-report?

PubMed

Portnuff, C D F; Fligor, B J; Arehart, K H

2013-02-01

This study was designed to evaluate the usage patterns of portable listening device (PLD) listeners, and the relationships between self-report measures and long-term dosimetry measures of listening habits. This study used a descriptive correlational design. Participants (N = 52) were 18-29 year old men and women who completed surveys. A randomly assigned subset (N = 24) of participants had their listening monitored by dosimetry for one week. Median weekly noise doses reported and measured through dosimetry were low (9-93%), but 14.3% of participants reported exceeding a 100% noise dose weekly. When measured by dosimetry, 16.7% of participants exceeded a 100% noise dose weekly. The self-report question that best predicted the dosimetry-measured dose asked participants to report listening duration and usual listening level on a visual-analog scale. This study reports a novel dosimetry system that can provide accurate measures of PLD use over time. When not feasible, though, the self-report question described could provide a useful research or clinical tool to estimate exposure from PLD use. Among the participants in this study, a small but substantial percentage of PLD users incurred exposure from PLD use alone that increases their risk of music-induced hearing loss.

Physical activity as a preventive measure against overweight, obesity, infections, allergies and cardiovascular disease risk factors in adolescents: AFINOS Study protocol

PubMed Central

2009-01-01

Background Prior studies addressing the impacts of regular physical activity or sedentary habits on the immune system have been conducted in adults and laboratory settings. Thus, it is practically unknown how a healthy active lifestyle could affect low-grade inflammation processes, infections or allergies in young persons. The AFINOS Study was designed to determine the relationship between the regular physical activity levels of adolescents and overweight, infection, and allergies along with the presence of metabolic and immunological biomarkers of a deteriorated health status. A further objective of the AFINOS Study is to assess the health status and lifestyle habits of an adolescent population in an effort to identify any protective factors that could be used as preventive measures, since many chronic diseases and their associated co-morbidities often persist from adolescence into adulthood. Methods/Design This study was conducted as three separate sub-studies in three different populations as follows: (a) Study 1 was performed on a population sample of adolescents; (b) Study 2 on the adolescents' parents; and (c) Study 3 on a subset of the adolescents from Study 1. Study 1 assessed health and lifestyle indicators through a questionnaire administered to a representative sample of adolescents from the Madrid Region (n = 2400) aged 13 to 16 years. In Study 2, the parents of the teenagers participating in Study 1 were required to fill out a questionnaire. Finally in Study 3, body composition, physical activity, health-related physical fitness, and blood measurements were determined in a subset (n = 200) of the individuals included in Study 1. Discussion This paper describes the rationale, design, and methodologies used in the AFINOS Study. This multidisciplinary, multicenter study seeks to evaluate several aspects of existing relationships between routine physical activity/sedentary behaviour and several health status markers, specifically those related to the immune system. The results of this cross-sectional study will serve for comparisons with the available data obtained in laboratory settings and in adults. In addition, knowledge regarding the health status and lifestyle habits of Spanish adolescents and their parents will be useful for designing preventive measures. PMID:20021690

Methodological quality of behavioural weight loss studies: a systematic review

PubMed Central

Lemon, S. C.; Wang, M. L.; Haughton, C. F.; Estabrook, D. P.; Frisard, C. F.; Pagoto, S. L.

2018-01-01

Summary This systematic review assessed the methodological quality of behavioural weight loss intervention studies conducted among adults and associations between quality and statistically significant weight loss outcome, strength of intervention effectiveness and sample size. Searches for trials published between January, 2009 and December, 2014 were conducted using PUBMED, MEDLINE and PSYCINFO and identified ninety studies. Methodological quality indicators included study design, anthropometric measurement approach, sample size calculations, intent-to-treat (ITT) analysis, loss to follow-up rate, missing data strategy, sampling strategy, report of treatment receipt and report of intervention fidelity (mean = 6.3). Indicators most commonly utilized included randomized design (100%), objectively measured anthropometrics (96.7%), ITT analysis (86.7%) and reporting treatment adherence (76.7%). Most studies (62.2%) had a follow-up rate >75% and reported a loss to follow-up analytic strategy or minimal missing data (69.9%). Describing intervention fidelity (34.4%) and sampling from a known population (41.1%) were least common. Methodological quality was not associated with reporting a statistically significant result, effect size or sample size. This review found the published literature of behavioural weight loss trials to be of high quality for specific indicators, including study design and measurement. Identified for improvement include utilization of more rigorous statistical approaches to loss to follow up and better fidelity reporting. PMID:27071775

Quantitative imaging biomarkers: a review of statistical methods for technical performance assessment.

PubMed

Raunig, David L; McShane, Lisa M; Pennello, Gene; Gatsonis, Constantine; Carson, Paul L; Voyvodic, James T; Wahl, Richard L; Kurland, Brenda F; Schwarz, Adam J; Gönen, Mithat; Zahlmann, Gudrun; Kondratovich, Marina V; O'Donnell, Kevin; Petrick, Nicholas; Cole, Patricia E; Garra, Brian; Sullivan, Daniel C

2015-02-01

Technological developments and greater rigor in the quantitative measurement of biological features in medical images have given rise to an increased interest in using quantitative imaging biomarkers to measure changes in these features. Critical to the performance of a quantitative imaging biomarker in preclinical or clinical settings are three primary metrology areas of interest: measurement linearity and bias, repeatability, and the ability to consistently reproduce equivalent results when conditions change, as would be expected in any clinical trial. Unfortunately, performance studies to date differ greatly in designs, analysis method, and metrics used to assess a quantitative imaging biomarker for clinical use. It is therefore difficult or not possible to integrate results from different studies or to use reported results to design studies. The Radiological Society of North America and the Quantitative Imaging Biomarker Alliance with technical, radiological, and statistical experts developed a set of technical performance analysis methods, metrics, and study designs that provide terminology, metrics, and methods consistent with widely accepted metrological standards. This document provides a consistent framework for the conduct and evaluation of quantitative imaging biomarker performance studies so that results from multiple studies can be compared, contrasted, or combined. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Shipboard Electrical System Modeling for Early-Stage Design Space Exploration

DTIC Science & Technology

2013-04-01

method is demonstrated in several system studies. I. INTRODUCTION The integrated engineering plant ( IEP ) of an electric warship can be viewed as a...which it must operate [2], [4]. The desired IEP design should be dependable [5]. The operability metric has previously been defined as a measure of...the performance of an IEP during a specific scenario [2]. Dependability metrics have been derived from the operability metric as measures of the IEP

Maydays and Murphies: A Study of the Effect of Organizational Design, Task, and Stress on Organizational Performance

DTIC Science & Technology

1992-07-29

provide a series of hypotheses which we can test both with human experiments and by using real organizational data. Since human experiments are costly to...able to predict organizational performance (e.g., Mackenzie, 1978; Krackhardt, 1989). Rarely have they been tested and contrasted. The formal...also tested and contrasted the predictability of existing measures of organizational design. They found that no single measure predicted performance

Surface water, groundwater, and social science measurements in a prototype hydrologic observatory

NASA Astrophysics Data System (ADS)

Genereux, D.; Duffy, C.; Famiglietti, J.; Helly, J.; Hooper, R.; Krajewski, W.; McKnight, D.; Ogden, F.; Reckhow, K.; Scanlon, B.; Shabmasn, L.

2003-12-01

We convened in late April 2003 to begin work on the design for a "paper" prototype hydrologic observatory (HO) in the watershed of the Neuse estuary in North Carolina. This design example was to specify what would be measured in the HO, why, where, how, how often, and how much it would cost. This presentation focuses on aspects of the design related to stream and river measurements (discharge, water quality, fluvial geomorphology and sediment), groundwater measurements, and groundwater interaction with streams, rivers, and the estuary. Also considered is the collection of social sciences data to support multidisciplinary studies of land and water use and the consequences for flooding, water supply, and water quality. A second presentation in this session (Scanlon et al.) covers atmospheric and land surface aspects of the HO design, including recharge and ET. The design calls for measurements to quantify surface and subsurface hydrologic fluxes (water, solutes, sediment) into the Neuse estuary, and internally within the watershed at a wide range of spatial scales (about 5 orders of magnitude, roughly 0.1-10,000 square km). One hydrologic goal is to construct reliable water budgets for watersheds spanning this full range of scales, from the smallest to the full Neuse estuary watershed. A linked water quality goal is a strong quantitative characterization of the hydrologic storage and transport of nitrogen, a major water quality issue in this and many other large watersheds with major agricultural operations. Geomorphological observations will target the effects of physiographic and anthropogenic factors on rates of erosion, residence times of sediment in the fluvial system, and the role of wetlands and channel sources on the discharge of sediment and sorbed nutrients to the Neuse estuary during extreme events. Measurements will span the entire Neuse watershed but be more concentrated in a subset of 6 intermediate-size watersheds (averaging about 500 square km) that represent zones of different geology, land use, and topography within the larger watershed. We do not claim that the design is "optimal" in a rigorous statistical sense, but believe the reasoning used in the design is sound and applicable to other sites. The design and its staged implementation plan are flexible and allow the reasonably full coverage of the hydrologic cycle (and reasonable core) necessary to yield new insights and to make the HO an attractive site for individual studies.

A Review of Evidence-Based Traffic Engineering Measures Designed to Reduce Pedestrian–Motor Vehicle Crashes

PubMed Central

Retting, Richard A.; Ferguson, Susan A.; McCartt, Anne T.

2003-01-01

We provide a brief critical review and assessment of engineering modifications to the built environment that can reduce the risk of pedestrian injuries. In our review, we used the Transportation Research Information Services database to conduct a search for studies on engineering countermeasures documented in the scientific literature. We classified countermeasures into 3 categories—speed control, separation of pedestrians from vehicles, and measures that increase the visibility and conspicuity of pedestrians. We determined the measures and settings with the greatest potential for crash prevention. Our review, which emphasized inclusion of studies with adequate methodological designs, showed that modification of the built environment can substantially reduce the risk of pedestrian–vehicle crashes. PMID:12948963

Development of a wearable plantar force measurement device for gait analysis in remote conditions.

PubMed

Hamid, Rawnak; Wijesundara, Suharshani; McMillan, Lachlan; Scott, David; Redoute, Jean-Michel; Ebeling, Peter R; Yuce, Mehmet Rasit

2017-07-01

The pressure field that exists between the foot and the supporting surface is identified as the foot plantar pressure. The information obtained from foot plantar pressure measurements has useful applications that include diagnosis of gait disturbances, optimization of footwear design, sport biomechanics and prevention of injury. Using wearable technology to measure foot plantar pressure continuously allows the collection of comprehensive real-life data sets while interfering minimally with the subject's daily activities. This paper presents the design of a wearable device to measure foot plantar pressure. Mechanical and electrical design considerations as well as data analysis are discussed. A pilot study involving 20 physically fit volunteers (15 males and 5 females, ageing from 20 - 45) performing a variety of physical activities (such as standing, walking, jumping and climbing up and down stairs) illustrate the potential of the device in terms of its wearability, and suitability for unobtrusive long-term monitoring.

Extravehicular activities limitations study. Volume 2: Establishment of physiological and performance criteria for EVA gloves

NASA Technical Reports Server (NTRS)

Ohara, John M.; Briganti, Michael; Cleland, John; Winfield, Dan

1988-01-01

One of the major probelms faced in Extravehicular Activity (EVA) glove development has been the absence of concise and reliable methods to measure the effects of EVA gloves on human hand capabilities. This report describes the development of a standardized set of tests designed to assess EVA-gloved hand capabilities in six measurement domains: Range of Motion, Strength, Tactile Perception, Dexterity, Fatigue, and Comfort. Based on an assessment of general human hand functioning and EVA task requirements several tests within each measurement domain were developed to provide a comprehensive evaluation. All tests were designed to be conducted in a glove box with the bare hand as a baseline and the EVA glove at operating pressure. A test program was conducted to evaluate the tests using a representative EVA glove. Eleven test subjects participated in a repeated-measures design. The report presents the results of the tests in each capability domain.

How is recovery from low back pain measured? A systematic review of the literature.

PubMed

Kamper, Steven J; Stanton, Tasha R; Williams, Christopher M; Maher, Christopher G; Hush, Julia M

2011-01-01

Recovery is commonly used as an outcome measure in low back pain (LBP) research. There is, however, no accepted definition of what recovery involves or guidance as to how it should be measured. The objective of the study was designed to appraise the LBP literature from the last 10 years to review the methods used to measure recovery. The research design includes electronic searches of Medline, EMBASE, CINAHL, Cochrane database of clinical trials and PEDro from the beginning of 1999 to December 2008. All prospective studies of subjects with non-specific LBP that measured recovery as an outcome were included. The way in which recovery was measured was extracted and categorised according to the domain used to assess recovery. Eighty-two included studies used 66 different measures of recovery. Fifty-nine of the measures did not appear in more than one study. Seventeen measures used pain as a proxy for recovery, seven used disability or function and seventeen were based on a combination of two or more constructs. There were nine single-item recovery rating scales. Eleven studies used a global change scale that included an anchor of 'completely recovered'. Three measures used return to work as the recovery criterion, two used time to insurance claim closure and six used physical performance. In conclusion, almost every study that measured recovery from LBP in the last 10 years did so differently. This lack of consistency makes interpretation and comparison of the LBP literature problematic. It is likely that the failure to use a standardised measure of recovery is due to the absence of an established definition, and highlights the need for such a definition in back pain research.

Lightness, chroma, and hue distributions of a shade guide as measured by a spectroradiometer.

PubMed

Lee, Yong-Keun; Yu, Bin; Lim, Ho-Nam

2010-09-01

The color attributes of commercially available shade guides have been measured by spectrophotometers (SP), which are designed to measure flat surfaces. However, there is limited information on the color distribution of shade guides as measured by spectroradiometers (SR), which are capable of measuring the color of curved surfaces. The purpose of this study was to determine the distributions of lightness (CIE L*) and chroma (C*(ab)) step intervals between adjacent shade tabs of a shade guide based on the lightness, chroma, and hue attributes measured by an SR. Lightness, chroma, hue angle, and CIE a* and b* values of the shade tabs (n=26) from a shade guide (Vitapan 3D-Master) were measured by an SR under daylight conditions. The distributions of the ratios in lightness and chroma of each tab compared with the lowest lightness tab or the lowest chroma tab were determined. The values for each color parameter were analyzed by a 3-way ANOVA with the factors of lightness, chroma, and hue designations of the shade tabs (alpha=.05). The chroma and CIE a* and b* values were influenced by the lightness, chroma, and hue designations of the shade tabs (P<.001); however, the lightness and hue angle were influenced by the lightness and hue designations, but not by the chroma designation. Distributions for the CIE a* and b* values, in each lightness group, corresponded with the chroma designation. However, the intervals in the lightness and chroma scales between adjacent tabs were not uniform. The intervals in the color parameters between adjacent shade tabs were not uniform based on SR measurements. Therefore, a shade guide in which shade tabs are more equally spaced by the color attributes, based on the values as measured by an SR along with observers' responses with respect to the equality of the intervals, should be devised. Copyright © 2010 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Economic Valuation of Air Force Environmental Resources: A Contingent Valuation Case Study.

DTIC Science & Technology

1996-12-01

Empirical Measures of Welfare Change: A Comparison of Non-market Techniques," Land Economics: 156-175 (Vol. 61, No. 2, 1985). Sen , Amartya K...shackles of the traditional [observed] approach" ( Sen , 1977). The flexibility of a properly designed contingent valuation study allows CVM to measure

Chinese Middle School Teachers' Preferences Regarding Performance Evaluation Measures

ERIC Educational Resources Information Center

Liu, Shujie; Xu, Xianxuan; Stronge, James H.

2016-01-01

Teacher performance evaluation currently is receiving unprecedented attention from policy makers, scholars, and practitioners worldwide. This study is one of the few studies of teacher perceptions regarding teacher performance measures that focus on China. We employed a quantitative dominant mixed research design to investigate Chinese teachers'…

Some Chronic Rhinosinusitis Patients Have Significantly Elevated Populations of Seven Fungi in their Sinuses

EPA Science Inventory

Abstract: Objectives/Hypothesis: To measure the populations of 36 fungi in the homes and sinuses of chronic rhinosinusitis (CRS) and non-CRS patients. Study Design: Single-blind cross-sectional study. Methods: Populations of 36 fungi were measured in sinus samples and in the home...

Exploring Patient Activation in the Clinic: Measurement from Three Perspectives

ERIC Educational Resources Information Center

Ledford, Christy J. W.; Ledford, Christopher C.; Childress, Marc A.

2013-01-01

Objective. To further conceptualize and operationalize patient activation (PA), using measures from patient, physician, and researcher perspectives. Data Source/Study Setting. Multimethod observation in 2010 within a family medicine clinic. Study Design. Part of an intervention with 130 patients with type 2 diabetes, this observational study…

Measuring Knowledge Integration Learning of Energy Topics: A Two-Year Longitudinal Study

ERIC Educational Resources Information Center

Liu, Ou Lydia; Ryoo, Kihyun; Linn, Marcia C.; Sato, Elissa; Svihla, Vanessa

2015-01-01

Although researchers call for inquiry learning in science, science assessments rarely capture the impact of inquiry instruction. This paper reports on the development and validation of assessments designed to measure middle-school students' progress in gaining integrated understanding of energy while studying an inquiry-oriented curriculum. The…

Measuring Personality Types of Secondary Pre-Service Teachers.

ERIC Educational Resources Information Center

Mittag, Kathleen Cage; Agnello, Mary Frances

This study surveyed the personality types, as measured by the Personal Preferences Self-Descriptive Questionnaire (PPSDQ), of 226 preservice secondary teachers at a large, urban, public university. The study was designed to determine whether certain personality types gravitated to the teaching profession in secondary schools and to compare the…

Case Studies

ERIC Educational Resources Information Center

Ritter, Lois A., Ed.; Sue, Valerie M., Ed.

2007-01-01

This article presents two case studies using online surveys for evaluation. The authors begin with an example of a needs assessment survey designed to measure the amount of help new students at a university require in their first year. They then discuss the follow-up survey conducted by the same university to measure the effectiveness of the…

Study Quality in SLA: A Cumulative and Developmental Assessment of Designs, Analyses, Reporting Practices, and Outcomes in Quantitative L2 Research

ERIC Educational Resources Information Center

Plonsky, Luke

2011-01-01

I began this study with two assumptions. Assumption 1: Study quality matters. If the means by which researchers design, carry out, and report on their studies lack in rigor or transparency, theory and practice are likely to be misguided or at least decelerated. Assumption 2 is an implication of Assumption 1: Quality should be measured rather than…

An extended protocol for usability validation of medical devices: Research design and reference model.

PubMed

Schmettow, Martin; Schnittker, Raphaela; Schraagen, Jan Maarten

2017-05-01

This paper proposes and demonstrates an extended protocol for usability validation testing of medical devices. A review of currently used methods for the usability evaluation of medical devices revealed two main shortcomings. Firstly, the lack of methods to closely trace the interaction sequences and derive performance measures. Secondly, a prevailing focus on cross-sectional validation studies, ignoring the issues of learnability and training. The U.S. Federal Drug and Food Administration's recent proposal for a validation testing protocol for medical devices is then extended to address these shortcomings: (1) a novel process measure 'normative path deviations' is introduced that is useful for both quantitative and qualitative usability studies and (2) a longitudinal, completely within-subject study design is presented that assesses learnability, training effects and allows analysis of diversity of users. A reference regression model is introduced to analyze data from this and similar studies, drawing upon generalized linear mixed-effects models and a Bayesian estimation approach. The extended protocol is implemented and demonstrated in a study comparing a novel syringe infusion pump prototype to an existing design with a sample of 25 healthcare professionals. Strong performance differences between designs were observed with a variety of usability measures, as well as varying training-on-the-job effects. We discuss our findings with regard to validation testing guidelines, reflect on the extensions and discuss the perspectives they add to the validation process. Copyright © 2017 Elsevier Inc. All rights reserved.

Two Capacitive Micro-Machined Ultrasonic Transducers for Wind Speed Measurement

PubMed Central

Bui, Gia Thinh; Jiang, Yu-Tsung; Pang, Da-Chen

2016-01-01

This paper presents a new wind speed measurement method using a single capacitive micro-machined ultrasonic transducer (CMUT). The CMUT was arranged perpendicular to the direction of the wind flow, and a reflector was set up a short distance away, facing the CMUT. To reduce the size, weight, cost, and power consumption of conventional ultrasonic anemometers this study proposes two CMUT designs for the measurement of wind speed using either the amplitude of the signal or the time of flight (TOF). Each CMUT with a double array element design can transmit and receive signals in five different operation modes. Experiments showed that the two CMUT designs utilizing the TOF were better than those utilizing the amplitude of the signal for wind speed measurements ranging from 1 m/s to 10 m/s, providing a measurement error of less than 0.2 m/s. These results indicate that the sensitivity of the TOF is independent of the five operation modes. PMID:27271625

Two Capacitive Micro-Machined Ultrasonic Transducers for Wind Speed Measurement.

PubMed

Bui, Gia Thinh; Jiang, Yu-Tsung; Pang, Da-Chen

2016-06-02

This paper presents a new wind speed measurement method using a single capacitive micro-machined ultrasonic transducer (CMUT). The CMUT was arranged perpendicular to the direction of the wind flow, and a reflector was set up a short distance away, facing the CMUT. To reduce the size, weight, cost, and power consumption of conventional ultrasonic anemometers this study proposes two CMUT designs for the measurement of wind speed using either the amplitude of the signal or the time of flight (TOF). Each CMUT with a double array element design can transmit and receive signals in five different operation modes. Experiments showed that the two CMUT designs utilizing the TOF were better than those utilizing the amplitude of the signal for wind speed measurements ranging from 1 m/s to 10 m/s, providing a measurement error of less than 0.2 m/s. These results indicate that the sensitivity of the TOF is independent of the five operation modes.

The Positive Emotions after Acute Coronary Events behavioral health intervention: Design, rationale, and preliminary feasibility of a factorial design study.

PubMed

Huffman, Jeffery C; Albanese, Ariana M; Campbell, Kirsti A; Celano, Christopher M; Millstein, Rachel A; Mastromauro, Carol A; Healy, Brian C; Chung, Wei-Jean; Januzzi, James L; Collins, Linda M; Park, Elyse R

2017-04-01

Positive psychological constructs, such as optimism, are associated with greater participation in cardiac health behaviors and improved cardiac outcomes. Positive psychology interventions, which target psychological well-being, may represent a promising approach to improving health behaviors in high-risk cardiac patients. However, no study has assessed whether a positive psychology intervention can promote physical activity following an acute coronary syndrome. In this article we will describe the methods of a novel factorial design study to aid the development of a positive psychology-based intervention for acute coronary syndrome patients and aim to provide preliminary feasibility data on study implementation. The Positive Emotions after Acute Coronary Events III study is an optimization study (planned N = 128), subsumed within a larger multiphase optimization strategy iterative treatment development project. The goal of Positive Emotions after Acute Coronary Events III is to identify the ideal components of a positive psychology-based intervention to improve post-acute coronary syndrome physical activity. Using a 2 × 2 × 2 factorial design, Positive Emotions after Acute Coronary Events III aims to: (1) evaluate the relative merits of using positive psychology exercises alone or combined with motivational interviewing, (2) assess whether weekly or daily positive psychology exercise completion is optimal, and (3) determine the utility of booster sessions. The study's primary outcome measure is moderate-to-vigorous physical activity at 16 weeks, measured via accelerometer. Secondary outcome measures include psychological, functional, and adherence-related behavioral outcomes, along with metrics of feasibility and acceptability. For the primary study outcome, we will use a mixed-effects model with a random intercept (to account for repeated measures) to assess the main effects of each component (inclusion of motivational interviewing in the exercises, duration of the intervention, and inclusion of booster sessions) from a full factorial model controlling for baseline activity. Similar analyses will be performed on self-report measures and objectively-measured medication adherence over 16 weeks. We hypothesize that the combined positive psychology and motivational interviewing intervention, weekly exercises, and booster sessions will be associated with superior physical activity. Thus far, 78 participants have enrolled, with 72% of all possible exercises fully completed by participants. The Positive Emotions after Acute Coronary Events III study will help to determine the optimal content, intensity, and duration of a positive psychology intervention in post-acute coronary syndrome patients prior to testing in a randomized trial. This study is novel in its use of a factorial design within the multiphase optimization strategy framework to optimize a behavioral intervention and the use of a positive psychology intervention to promote physical activity in high-risk cardiac patients.

[Realization of design regarding experimental research in the clinical real-world research].

PubMed

He, Q; Shi, J P

2018-04-10

Real world study (RWS), a further verification and supplement for explanatory randomized controlled trial to evaluate the effectiveness of intervention measures in real clinical environment, has increasingly become the focus in the field of research on medical and health care services. However, some people mistakenly equate real world study with observational research, and argue that intervention and randomization cannot be carried out in real world study. In fact, both observational and experimental design are the basic designs in real world study, while the latter usually refers to pragmatic randomized controlled trial and registry-based randomized controlled trial. Other nonrandomized controlled and adaptive designs can also be adopted in the RWS.

Measuring Homework Completion in Behavioral Activation

ERIC Educational Resources Information Center

Busch, Andrew M.; Uebelacker, Lisa A.; Kalibatseva, Zornitsa; Miller, Ivan W.

2010-01-01

The aim of this study was to develop and validate an observer-based coding system for the characterization and completion of homework assignments during Behavioral Activation (BA). Existing measures of homework completion are generally unsophisticated, and there is no current measure of homework completion designed to capture the particularities…

Development and Evaluation of a Measure of Library Automation.

ERIC Educational Resources Information Center

Pungitore, Verna L.

1986-01-01

Construct validity and reliability estimates indicate that study designed to measure utilization of automation in public and academic libraries was successful in tentatively identifying and measuring three subdimensions of level of automation: quality of hardware, method of software development, and number of automation specialists. Questionnaire…

Development and Validation of the Organizational Dissent Scale.

ERIC Educational Resources Information Center

Kassing, Jeffrey W.

1998-01-01

Develops a measure for operationalizing how employees verbally express their contradictory opinions and disagreements about organizational phenomena. Tests the Organizational Dissent Scale (ODS) in a series of studies designed to generate evidence of validity/reliability for the measure. Indicates that the scale measures how employees express…

Micro-jitter attenuation of spaceborne cooler by using a blade-type hyperelastic shape memory alloy passive isolator

NASA Astrophysics Data System (ADS)

Kwon, Seong-Cheol; Jeon, Young-Hyeon; Oh, Hyun-Ung

2017-10-01

In this study, the primary design objective is to develop a passive isolator that can guarantee structural safety of the cooler assembly in a launch vibration environment without a launch locking mechanism, while effectively isolating the cooler-induced micro-jitter during the on-orbit operation of the cooler. To achieve the design objective, we focused on the utilization of characteristics of the hyperelastic shape memory effects. The major advantage of the isolator is that the micro-jitter isolation performance is much less sensitive to the aligned position of the isolator in comparison with the conventional isolator. Moreover, implementation of an additional 0g compensation device during a satellite level on-ground test, such as a jitter measurement test, is not required. In this study, the basic characteristics of the isolator were measured using the torque test and free vibration test. The micro-jitter attenuation capability and position sensitivity of the proposed isolator design were validated by the micro-jitter measurement test.

Value-based insurance design: benefits beyond cost and utilization.

PubMed

Gibson, Teresa B; Maclean, Ross J; Chernew, Michael E; Fendrick, A Mark; Baigel, Colin

2015-01-01

As value-based insurance design (VBID) programs proliferate, evidence is emerging on the impact of VBID. To date, studies have largely measured VBID impact on utilization, and a few studies have assessed its impact on quality, outcomes, and cost. In this commentary we discuss these domains, summarize evidence, and propose the extension of measurement of VBID impact into areas including workplace productivity and quality of life, employee and patient engagement, and talent attraction and retention. We contend that VBID evaluations should consider a broad variety of programmatic dividends on both humanistic and health-related outcomes.

Contamination effects study

NASA Technical Reports Server (NTRS)

1988-01-01

The in-situ optical surface measurement system is a facility designed to study the deleterious effects of particulate materials on the surface reflectivities of optical materials in the vacuum ultraviolet (VUV). This arrangement is designed to simulate the on-orbit effects of contamination and degradation of optical surfaces. This simulation is accomplished through the use of non-coherent VUV sources illuminating optical surfaces located in a high vacuum chamber. Several sources of contamination are employed. The reflectivity is measured both at the specular reflection as well as at two scattered positions, forward and reverse. The system components are described and an operating procedure is given.

The conditional power of randomization tests for single-case effect sizes in designs with randomized treatment order: A Monte Carlo simulation study.

PubMed

Michiels, Bart; Heyvaert, Mieke; Onghena, Patrick

2018-04-01

The conditional power (CP) of the randomization test (RT) was investigated in a simulation study in which three different single-case effect size (ES) measures were used as the test statistics: the mean difference (MD), the percentage of nonoverlapping data (PND), and the nonoverlap of all pairs (NAP). Furthermore, we studied the effect of the experimental design on the RT's CP for three different single-case designs with rapid treatment alternation: the completely randomized design (CRD), the randomized block design (RBD), and the restricted randomized alternation design (RRAD). As a third goal, we evaluated the CP of the RT for three types of simulated data: data generated from a standard normal distribution, data generated from a uniform distribution, and data generated from a first-order autoregressive Gaussian process. The results showed that the MD and NAP perform very similarly in terms of CP, whereas the PND performs substantially worse. Furthermore, the RRAD yielded marginally higher power in the RT, followed by the CRD and then the RBD. Finally, the power of the RT was almost unaffected by the type of the simulated data. On the basis of the results of the simulation study, we recommend at least 20 measurement occasions for single-case designs with a randomized treatment order that are to be evaluated with an RT using a 5% significance level. Furthermore, we do not recommend use of the PND, because of its low power in the RT.

The Effect of Training in Instructional Designer Competencies on Teachers' Planning Routine and Their Students' Academic Achievement.

ERIC Educational Resources Information Center

Darwazeh, Afnan N.

A class of 37 in-service government school teachers from the Nablus (Palestine) district was studied to investigate the effects of 18 hours of training in Instructional Designer's Competencies (IDC) on teachers' planning routine, and their students' academic achievement. A questionnaire measured IDC in five domains: analysis, design,…

Quantifying the Information Habits of High School Students Engaged in Engineering Design

ERIC Educational Resources Information Center

Mentzer, Nathan; Fosmire, Michael J.

2015-01-01

This study measured the information gathering behaviors of high school students who had taken engineering design courses as they solved a design problem. The authors investigated what types of information students accessed, its quality, when it was accessed during the students' process, and if it impacted their thinking during the activity.…

Characterizing Elementary Teachers' Enactment of High-Leverage Practices through Engineering Design-Based Science Instruction

ERIC Educational Resources Information Center

Capobianco, Brenda M.; DeLisi, Jacqueline; Radloff, Jeffrey

2018-01-01

In an effort to document teachers' enactments of new reform in science teaching, valid and scalable measures of science teaching using engineering design are needed. This study describes the development and testing of an approach for documenting and characterizing elementary science teachers' multiday enactments of engineering design-based science…

Using Rasch Measurement To Investigate the Cross-form Equivalence and Clinical Utility of Spanish and English Versions of a Diabetes Questionnaire: A Pilot Study.

ERIC Educational Resources Information Center

Gerber, Ben; Smith, Everett V., Jr.; Girotti, Mariela; Pelaez, Lourdes; Lawless, Kimberly; Smolin, Louanne; Brodsky, Irwin; Eiser, Arnold

2002-01-01

Used Rasch measurement to study the psychometric properties of data obtained from a newly developed Diabetes Questionnaire designed to measure diabetes knowledge, attitudes, and self-care. Responses of 26 diabetes patients to the English version of the questionnaire and 24 patients to the Spanish version support the cross-form equivalence and…

Measuring the effect of an eight-week adaptive yoga program on the physical and psychological status of individuals with Parkinson's disease. A pilot study.

PubMed

Boulgarides, L K; Barakatt, E; Coleman-Salgado, B

2014-01-01

Parkinson's disease (PD) is a neurodegenerative disease that affects muscle tone, strength, flexibility, motor control, psychological outlook, cognition, and function. Exercise has been found to improve physical ability and psychological outlook, but the effect of yoga on individuals with PD has not been well researched. The purposes of this study were to identify outcome measures that were responsive to change in individuals with PD after an 8-week adaptive yoga program and to determine appropriate sample sizes for future studies. In a repeated measures design, 10 participants with a Hoehn and Yahr stage of 2 or 3 were tested prior to and after an 8-week control phase and again after they underwent an 8-week adaptive yoga program. Analysis of variance (ANOVA) tests revealed differences in time of measure that approached significance for the depression subscale of the Hospital Anxiety and Depression Scale (HADS) (p = 0.008) and the 30-Second Chair Stand (TSCS) (p = 0.013). The interaction between time of measure and gender approached significance for the Sit-and-Reach Test (SRT) (p = 0.08 and 0.03, right and left respectively), with male participants improving in sit-and-reach flexibility compared with female participants after intervention. The interaction between time of measure and age approached significance for the Single-Leg Balance test (SLB) (p = 0.007), with younger participants improving in SLB time after intervention. Power calculations found that a sample size ranging from 33 to 153 would be required to achieve significance at the 0.01 level in the various outcome measures in a future study of this design. The depression subscale of the HADS, the TSCS, the SLB, and the right and left SRT were the measures that changed following the yoga intervention and are recommended as outcome measures in future studies investigating the effectiveness of yoga for individuals with PD. This preliminary study supports further investigation of adaptive yoga using a randomized design and a larger sample size of individuals with PD.

Microwave Resonator Measurements of Atmospheric Absorption Coefficients: A Preliminary Design Study

NASA Technical Reports Server (NTRS)

Walter, Steven J.; Spilker, Thomas R.

1995-01-01

A preliminary design study examined the feasibility of using microwave resonator measurements to improve the accuracy of atmospheric absorption coefficients and refractivity between 18 and 35 GHz. Increased accuracies would improve the capability of water vapor radiometers to correct for radio signal delays caused by Earth's atmosphere. Calibration of delays incurred by radio signals traversing the atmosphere has applications to both deep space tracking and planetary radio science experiments. Currently, the Cassini gravity wave search requires 0.8-1.0% absorption coefficient accuracy. This study examined current atmospheric absorption models and estimated that current model accuracy ranges from 5% to 7%. The refractivity of water vapor is known to 1% accuracy, while the refractivity of many dry gases (oxygen, nitrogen, etc.) are known to better than 0.1%. Improvements to the current generation of models will require that both the functional form and absolute absorption of the water vapor spectrum be calibrated and validated. Several laboratory techniques for measuring atmospheric absorption and refractivity were investigated, including absorption cells, single and multimode rectangular cavity resonators, and Fabry-Perot resonators. Semi-confocal Fabry-Perot resonators were shown to provide the most cost-effective and accurate method of measuring atmospheric gas refractivity. The need for accurate environmental measurement and control was also addressed. A preliminary design for the environmental control and measurement system was developed to aid in identifying significant design issues. The analysis indicated that overall measurement accuracy will be limited by measurement errors and imprecise control of the gas sample's thermodynamic state, thermal expansion and vibration- induced deformation of the resonator structure, and electronic measurement error. The central problem is to identify systematic errors because random errors can be reduced by averaging. Calibrating the resonator measurements by checking the refractivity of dry gases which are known to better than 0.1% provides a method of controlling the systematic errors to 0.1%. The primary source of error in absorptivity and refractivity measurements is thus the ability to measure the concentration of water vapor in the resonator path. Over the whole thermodynamic range of interest the accuracy of water vapor measurement is 1.5%. However, over the range responsible for most of the radio delay (i.e. conditions in the bottom two kilometers of the atmosphere) the accuracy of water vapor measurements ranges from 0.5% to 1.0%. Therefore the precision of the resonator measurements could be held to 0.3% and the overall absolute accuracy of resonator-based absorption and refractivity measurements will range from 0.6% to 1.

Environmental Measurement in Schools: Electronics in Field Studies.

ERIC Educational Resources Information Center

Crellin, J. R.

1978-01-01

The use of environmental meters designed to measure conductivity, light level, oxygen, pH, sound, and temperature are discussed. Criteria for choosing suitable equipment are suggested and, where possible, cheaper alternatives are mentioned. (Author/BB)

A Human Factors Evaluation of the Space Shuttle Cockpit Avionics Upgrade

DTIC Science & Technology

2012-09-01

cockpit design . This study assesses the CAU design employing human factors principles, evaluates baseline and CAU simulation data, and traces MW and SA...differences back to CAU design modifications. Significant improvements were found in all measures and across all conditions. These improvements were...found to be greater for ascent scenarios than for entry. From the findings, recommendations for the design and evaluation of future spacecraft

Healthcare outcomes assessed with observational study designs compared with those assessed in randomized trials.

PubMed

Anglemyer, Andrew; Horvath, Hacsi T; Bero, Lisa

2014-04-29

Researchers and organizations often use evidence from randomized controlled trials (RCTs) to determine the efficacy of a treatment or intervention under ideal conditions. Studies of observational designs are often used to measure the effectiveness of an intervention in 'real world' scenarios. Numerous study designs and modifications of existing designs, including both randomized and observational, are used for comparative effectiveness research in an attempt to give an unbiased estimate of whether one treatment is more effective or safer than another for a particular population.A systematic analysis of study design features, risk of bias, parameter interpretation, and effect size for all types of randomized and non-experimental observational studies is needed to identify specific differences in design types and potential biases. This review summarizes the results of methodological reviews that compare the outcomes of observational studies with randomized trials addressing the same question, as well as methodological reviews that compare the outcomes of different types of observational studies. To assess the impact of study design (including RCTs versus observational study designs) on the effect measures estimated.To explore methodological variables that might explain any differences identified.To identify gaps in the existing research comparing study designs. We searched seven electronic databases, from January 1990 to December 2013.Along with MeSH terms and relevant keywords, we used the sensitivity-specificity balanced version of a validated strategy to identify reviews in PubMed, augmented with one term ("review" in article titles) so that it better targeted narrative reviews. No language restrictions were applied. We examined systematic reviews that were designed as methodological reviews to compare quantitative effect size estimates measuring efficacy or effectiveness of interventions tested in trials with those tested in observational studies. Comparisons included RCTs versus observational studies (including retrospective cohorts, prospective cohorts, case-control designs, and cross-sectional designs). Reviews were not eligible if they compared randomized trials with other studies that had used some form of concurrent allocation. In general, outcome measures included relative risks or rate ratios (RR), odds ratios (OR), hazard ratios (HR). Using results from observational studies as the reference group, we examined the published estimates to see whether there was a relative larger or smaller effect in the ratio of odds ratios (ROR).Within each identified review, if an estimate comparing results from observational studies with RCTs was not provided, we pooled the estimates for observational studies and RCTs. Then, we estimated the ratio of ratios (risk ratio or odds ratio) for each identified review using observational studies as the reference category. Across all reviews, we synthesized these ratios to get a pooled ROR comparing results from RCTs with results from observational studies. Our initial search yielded 4406 unique references. Fifteen reviews met our inclusion criteria; 14 of which were included in the quantitative analysis.The included reviews analyzed data from 1583 meta-analyses that covered 228 different medical conditions. The mean number of included studies per paper was 178 (range 19 to 530).Eleven (73%) reviews had low risk of bias for explicit criteria for study selection, nine (60%) were low risk of bias for investigators' agreement for study selection, five (33%) included a complete sample of studies, seven (47%) assessed the risk of bias of their included studies,Seven (47%) reviews controlled for methodological differences between studies,Eight (53%) reviews controlled for heterogeneity among studies, nine (60%) analyzed similar outcome measures, and four (27%) were judged to be at low risk of reporting bias.Our primary quantitative analysis, including 14 reviews, showed that the pooled ROR comparing effects from RCTs with effects from observational studies was 1.08 (95% confidence interval (CI) 0.96 to 1.22). Of 14 reviews included in this analysis, 11 (79%) found no significant difference between observational studies and RCTs. One review suggested observational studies had larger effects of interest, and two reviews suggested observational studies had smaller effects of interest.Similar to the effect across all included reviews, effects from reviews comparing RCTs with cohort studies had a pooled ROR of 1.04 (95% CI 0.89 to 1.21), with substantial heterogeneity (I(2) = 68%). Three reviews compared effects of RCTs and case-control designs (pooled ROR: 1.11 (95% CI 0.91 to 1.35)).No significant difference in point estimates across heterogeneity, pharmacological intervention, or propensity score adjustment subgroups were noted. No reviews had compared RCTs with observational studies that used two of the most common causal inference methods, instrumental variables and marginal structural models. Our results across all reviews (pooled ROR 1.08) are very similar to results reported by similarly conducted reviews. As such, we have reached similar conclusions; on average, there is little evidence for significant effect estimate differences between observational studies and RCTs, regardless of specific observational study design, heterogeneity, or inclusion of studies of pharmacological interventions. Factors other than study design per se need to be considered when exploring reasons for a lack of agreement between results of RCTs and observational studies. Our results underscore that it is important for review authors to consider not only study design, but the level of heterogeneity in meta-analyses of RCTs or observational studies. A better understanding of how these factors influence study effects might yield estimates reflective of true effectiveness.

Measuring the Effects of an On-Line Training Module for School Psychologists Working with Traumatized Children: A Pilot Study

ERIC Educational Resources Information Center

Dezen, Kristin

2012-01-01

The present study was designed to address the current lack of trauma training provided to school psychologists. Specifically, this study employed a randomized, controlled design to test the efficacy of an on-line training targeting school psychology graduate student trainees' awareness of the signs and symptoms of child abuse as well as their…

Usability Studies In Virtual And Traditional Computer Aided Design Environments For Spatial Awareness

DTIC Science & Technology

2017-08-08

Usability Studies In Virtual And Traditional Computer Aided Design Environments For Spatial Awareness Dr. Syed Adeel Ahmed, Xavier University of...virtual environment with wand interfaces compared directly with a workstation non-stereoscopic traditional CAD interface with keyboard and mouse. In...navigate through a virtual environment. The wand interface provides a significantly improved means of interaction. This study quantitatively measures the

Development and Psychometric Evaluation of the Reasons for Living-Older Adults Scale: A Suicide Risk Assessment Inventory

ERIC Educational Resources Information Center

Edelstein, Barry A.; Heisel, Marnin J.; McKee, Deborah R.; Martin, Ronald R.; Koven, Lesley P.; Duberstein, Paul R.; Britton, Peter C.

2009-01-01

Purpose: The purposes of these studies were to develop and initially evaluate the psychometric properties of the Reasons for Living Scale-Older Adult version (RFL-OA), an older adults version of a measure designed to assess reasons for living among individuals at risk for suicide. Design and Methods: Two studies are reported. Study 1 involved…

Adaptive Signal Recovery on Graphs via Harmonic Analysis for Experimental Design in Neuroimaging.

PubMed

Kim, Won Hwa; Hwang, Seong Jae; Adluru, Nagesh; Johnson, Sterling C; Singh, Vikas

2016-10-01

Consider an experimental design of a neuroimaging study, where we need to obtain p measurements for each participant in a setting where p ' (< p ) are cheaper and easier to acquire while the remaining ( p - p ') are expensive. For example, the p ' measurements may include demographics, cognitive scores or routinely offered imaging scans while the ( p - p ') measurements may correspond to more expensive types of brain image scans with a higher participant burden. In this scenario, it seems reasonable to seek an "adaptive" design for data acquisition so as to minimize the cost of the study without compromising statistical power. We show how this problem can be solved via harmonic analysis of a band-limited graph whose vertices correspond to participants and our goal is to fully recover a multi-variate signal on the nodes, given the full set of cheaper features and a partial set of more expensive measurements. This is accomplished using an adaptive query strategy derived from probing the properties of the graph in the frequency space. To demonstrate the benefits that this framework can provide, we present experimental evaluations on two independent neuroimaging studies and show that our proposed method can reliably recover the true signal with only partial observations directly yielding substantial financial savings.

Two theories/a sharper lens: the staff nurse voice in the workplace.

PubMed

DeMarco, Rosanna

2002-06-01

This paper (1) introduces the two theoretical frameworks, Silencing the Self and the Framework of Systemic Organization (2) describes the design and findings briefly of a study exploring spillover in nurses utilizing the frameworks, and (3) discusses the process and value of theory triangulation when conducting research in the context of complex nursing systems phenomena where gender, professional work, and gender identity merge. A research study was designed to analyse the actual workplace behaviours of nurses in the context of their lives at work and outside work. An exploration of theoretical frameworks that could direct the measurement of the phenomena in question led to the use of two frameworks, the Framework of Systemic Organization (Friedemann 1995) and the Silencing the Self Theory (Jack 1991), and the creation of a valid and reliable summative rating instrument (the Staff Nurse Workplace Behaviours Scale, SNWBS). A descriptive correlational design was used to measure behaviours between work and home. There were statistically significant relationships found between workplace behaviours, family behaviours, and silencing behaviours as measured by the two separate scales measuring framework concepts. Although both theories had different origins and philosophical tenets, the findings of a research study created an opportunity to integrate the concepts of each and unexpectedly increase and broaden the understanding of spillover for women who are often nurses.

Measurement Techniques for Respiratory Tract Deposition of Airborne Nanoparticles: A Critical Review

PubMed Central

Möller, Winfried; Pagels, Joakim H.; Kreyling, Wolfgang G.; Swietlicki, Erik; Schmid, Otmar

2014-01-01

Abstract Determination of the respiratory tract deposition of airborne particles is critical for risk assessment of air pollution, inhaled drug delivery, and understanding of respiratory disease. With the advent of nanotechnology, there has been an increasing interest in the measurement of pulmonary deposition of nanoparticles because of their unique properties in inhalation toxicology and medicine. Over the last century, around 50 studies have presented experimental data on lung deposition of nanoparticles (typical diameter≤100 nm, but here≤300 nm). These data show a considerable variability, partly due to differences in the applied methodologies. In this study, we review the experimental techniques for measuring respiratory tract deposition of nano-sized particles, analyze critical experimental design aspects causing measurement uncertainties, and suggest methodologies for future studies. It is shown that, although particle detection techniques have developed with time, the overall methodology in respiratory tract deposition experiments has not seen similar progress. Available experience from previous research has often not been incorporated, and some methodological design aspects that were overlooked in 30–70% of all studies may have biased the experimental data. This has contributed to a significant uncertainty on the absolute value of the lung deposition fraction of nanoparticles. We estimate the impact of the design aspects on obtained data, discuss solutions to minimize errors, and highlight gaps in the available experimental set of data. PMID:24151837

Individual determinants of research utilization: a systematic review.

PubMed

Estabrooks, Carole A; Floyd, Judith A; Scott-Findlay, Shannon; O'Leary, Katherine A; Gushta, Matthew

2003-09-01

In order to design interventions that increase research use in nursing, it is necessary to have an understanding of what influences research use. To report findings on a systematic review of studies that examine individual characteristics of nurses and how they influence the utilization of research. A survey of published articles in English that examine the influence of individual factors on the research utilization behaviour of nurses, without restriction of the study design, from selected computerized databases and hand searches. Articles had to measure one or more individual determinants of research utilization, measure the dependent variable (research utilization), and evaluate the relationship between the dependent and independent variables. The studies also had to indicate the direction of the relationship between the independent and dependent variables, report a P-value and the statistic used, and indicate the magnitude of the relationship. Six categories of potential individual determinants were identified: beliefs and attitudes, involvement in research activities, information seeking, professional characteristics, education and other socio-economic factors. Research design, sampling, measurement, and statistical analysis were examined to evaluate methodological quality. Methodological problems surfaced in all of the studies and, apart from attitude to research, there was little to suggest that any potential individual determinant influences research use. Important conceptual and measurement issues with regard to research utilization could be better addressed if research in the area were undertaken longitudinally by multi-disciplinary teams of researchers.

A Comparative Study of Competency-Based Courses Demonstrating a Potential Measure of Course Quality and Student Success

ERIC Educational Resources Information Center

Krause, Jackie; Dias, Laura Portolese; Schedler, Chris

2015-01-01

While competency-based education is growing, standardized tools for evaluating the unique characteristics of course design in this domain are still under development. This preliminary research study evaluated the effectiveness of a rubric developed for assessing course design of competency-based courses in an undergraduate Information Technology…

Personality Dominant Values in Graphic Design Students in Their Educational Practice

ERIC Educational Resources Information Center

Flores, René Pedroza

2016-01-01

The purpose of this article is to study the personality dominant values in Graphic Design students from the Autonomous University of the State of Mexico. A scale developed by Allport, Vernon and Lindsey called: "Study of values. A scale for the measuring of personality dominant interests" was used. The sample was applied to 124 students,…

The Effect of Portfolio Assessments on Metacognitive Skills and on Attitudes toward a Course

ERIC Educational Resources Information Center

Gencel, Ilke Evin

2017-01-01

The aim of this study is to determine through teacher candidates' thoughts the effects of a portfolio assessment implementation on their metacognitive skills and attitudes towards a course on measurement and evaluation. Exploratory sequential mixed-methods design is employed within the study. The pretest/posttest control group design was used in…

Meeting the Need to Belong: Predicting Effects of a Friendship Enrichment Program for Older Women

ERIC Educational Resources Information Center

Stevens, Nan L.; Martina, Camille M. S.; Westerhof, Gerben J.

2006-01-01

Purpose: This study explores the effects of participation in a program designed to enrich friendship and reduce loneliness among women in later life. Several hypotheses based on the need to belong, socioemotional selectivity theory, and the social compensation model were tested. Design and Methods: Study 1 involved two measurement points, one at…

Bias Corrections for Standardized Effect Size Estimates Used with Single-Subject Experimental Designs

ERIC Educational Resources Information Center

Ugille, Maaike; Moeyaert, Mariola; Beretvas, S. Natasha; Ferron, John M.; Van den Noortgate, Wim

2014-01-01

A multilevel meta-analysis can combine the results of several single-subject experimental design studies. However, the estimated effects are biased if the effect sizes are standardized and the number of measurement occasions is small. In this study, the authors investigated 4 approaches to correct for this bias. First, the standardized effect…

Typography for Children May Be Inappropriately Designed

ERIC Educational Resources Information Center

Wilkins, Arnold; Cleave, Roanna; Grayson, Nicola; Wilson, Louise

2009-01-01

We present four studies indicating that the size and design of the typeface in textual material for children aged 7-9 may impair speed of reading and comprehension, and measurement of reading attainment. The first study compared the speed with which sample sentences were comprehended. The sentences were printed in Arial font with an x-height of…

The Mediator Effects of Conceiving Imagination on Academic Performance of Design Students

ERIC Educational Resources Information Center

Lin, Wei-Sheng; Hsu, Yuling; Liang, Chaoyun

2014-01-01

Three studies were combined to examine the effects of creativity and imagination on the academic performance of design students. Study 1 conducted an exploratory factor analysis to determine the most appropriate structure of the Creativity Capability Scale (CCS) in a sample of 313 college students. The scale was a new self-report measure, and it…

As Green as We Think? The Case of the College of Charleston Green Building Initiative

ERIC Educational Resources Information Center

Owens, Katharine A.; Halfacre-Hitchcock, Angela

2006-01-01

Purpose: This paper seeks to disseminate knowledge regarding the experiences of a student team in implementing a campus-level sustainability initiative, outlining the strategy to measure the potential impact of this initiative. Design/methodology/approach: Project design is a case study. Via interviewing and surveys, the study observed student and…

Identifying Indicators Related to Constructs for Engineering Design Outcome

ERIC Educational Resources Information Center

Wilhelmsen, Cheryl A.; Dixon, Raymond A.

2016-01-01

This study ranked constructs articulated by Childress and Rhodes (2008) and identified the key indicators for each construct as a starting point to explore what should be included on an instrument to measure the engineering design process and outcomes of students in high schools that use the PLTW and EbDTM curricula in Idaho. A case-study design…

Performance of Subsurface Tube Drainage System in Saline Soils: A Case Study

NASA Astrophysics Data System (ADS)

Pali, A. K.

2015-06-01

In order to improve the saline and water logged soils caused due to groundwater table rise, installation of subsurface drainage system is considered as one of the best remedies. However, the design of the drainage system has to be accurate so that the field performance results conform to the designed results. In this investigation, the field performance of subsurface tube drainage system installed at the study area was evaluated. The performance was evaluated on the basis of comparison of the designed value of water table drop as 30 cm after 2 days of drainage and predicted and field measured hydraulic heads for a consecutive drainage period of 14 days. The investigation revealed that the actual drop of water table after 2 days of drainage was 25 cm, about 17 % less than the designed value of 30 cm after 2 days of drainage. The comparison of hydraulic heads predicted by Van Schilfgaarde equation of unsteady drainage with the field-measured hydraulic heads showed that the deviation of predicted hydraulic heads varied within a range of ±8 % indicating high acceptability of Van Schlifgaarde equation for designing subsurface drainage system in saline and water logged soils resembling to that of the study area.

Design definition study of the Earth radiation budget satellite system

NASA Technical Reports Server (NTRS)

Vonderhaar, T. H.; Wallschlaeger, W. H.

1978-01-01

Instruments for measuring the radiation budget components are discussed, and the conceptual design of instruments for the Earth Radiation Budget Satellite System (ERBSS) are reported. Scanning and nonscanning assemblies are described. The ERBSS test program is also described.

Evaluating sediment capture rates for different sediment basin designs.

DOT National Transportation Integrated Search

2007-08-01

The effectiveness of sediment control devices was studied on a large NC DOT project to determine the : effects of different designs and conditions. Flow and sediment content of water exiting six different traps : and basins were measured and the amou...

Design of a Horizontal Penetrometer for Measuring On-the-Go Soil Resistance

PubMed Central

Topakci, Mehmet; Unal, Ilker; Canakci, Murad; Celik, Huseyin Kursat; Karayel, Davut

2010-01-01

Soil compaction is one of the main negative factors that limits plant growth and crop yield. Therefore, it is important to determine the soil resistance level and map it for the field to find solutions for the negative effects of the compaction. Nowadays, high powered communication technology and computers help us on this issue within the approach of precision agriculture applications. This study is focused on the design of a penetrometer, which can make instantaneous soil resistance measurements in the soil horizontally and data acquisition software based on the GPS (Global Positioning System). The penetrometer was designed using commercial 3D parametric solid modelling design software. The data acquisition software was developed in Microsoft Visual Basic.NET programming language. After the design of the system, manufacturing and assembly of the system was completed and then a field experiment was carried out. According to the data from GPS and penetration resistance values which are collected in Microsoft SQL Server database, a Kriging method by ArcGIS was used and soil resistance was mapped in the field for a soil depth of 40 cm. During operation, no faults, either in mechanical and software parts, were seen. As a result, soil resistance values of 0.2 MPa and 3 MPa were obtained as minimum and maximum values, respectively. In conclusion, the experimental results showed that the designed system works quite well in the field and the horizontal penetrometer is a practical tool for providing on-line soil resistance measurements. This study contributes to further research for the development of on-line soil resistance measurements and mapping within the precision agriculture applications. PMID:22163410

Design of a horizontal penetrometer for measuring on-the-go soil resistance.

PubMed

Topakci, Mehmet; Unal, Ilker; Canakci, Murad; Celik, Huseyin Kursat; Karayel, Davut

2010-01-01

Soil compaction is one of the main negative factors that limits plant growth and crop yield. Therefore, it is important to determine the soil resistance level and map it for the field to find solutions for the negative effects of the compaction. Nowadays, high powered communication technology and computers help us on this issue within the approach of precision agriculture applications. This study is focused on the design of a penetrometer, which can make instantaneous soil resistance measurements in the soil horizontally and data acquisition software based on the GPS (Global Positioning System). The penetrometer was designed using commercial 3D parametric solid modelling design software. The data acquisition software was developed in Microsoft Visual Basic.NET programming language. After the design of the system, manufacturing and assembly of the system was completed and then a field experiment was carried out. According to the data from GPS and penetration resistance values which are collected in Microsoft SQL Server database, a Kriging method by ArcGIS was used and soil resistance was mapped in the field for a soil depth of 40 cm. During operation, no faults, either in mechanical and software parts, were seen. As a result, soil resistance values of 0.2 MPa and 3 MPa were obtained as minimum and maximum values, respectively. In conclusion, the experimental results showed that the designed system works quite well in the field and the horizontal penetrometer is a practical tool for providing on-line soil resistance measurements. This study contributes to further research for the development of on-line soil resistance measurements and mapping within the precision agriculture applications.

OVERVIEW OF NEUTRON MEASUREMENTS IN JET FUSION DEVICE.

PubMed

Batistoni, P; Villari, R; Obryk, B; Packer, L W; Stamatelatos, I E; Popovichev, S; Colangeli, A; Colling, B; Fonnesu, N; Loreti, S; Klix, A; Klosowski, M; Malik, K; Naish, J; Pillon, M; Vasilopoulou, T; De Felice, P; Pimpinella, M; Quintieri, L

2017-10-05

The design and operation of ITER experimental fusion reactor requires the development of neutron measurement techniques and numerical tools to derive the fusion power and the radiation field in the device and in the surrounding areas. Nuclear analyses provide essential input to the conceptual design, optimisation, engineering and safety case in ITER and power plant studies. The required radiation transport calculations are extremely challenging because of the large physical extent of the reactor plant, the complexity of the geometry, and the combination of deep penetration and streaming paths. This article reports the experimental activities which are carried-out at JET to validate the neutronics measurements methods and numerical tools used in ITER and power plant design. A new deuterium-tritium campaign is proposed in 2019 at JET: the unique 14 MeV neutron yields produced will be exploited as much as possible to validate measurement techniques, codes, procedures and data currently used in ITER design thus reducing the related uncertainties and the associated risks in the machine operation. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Key Design Considerations When Calculating Cost Savings for Population Health Management Programs in an Observational Setting.

PubMed

Murphy, Shannon M E; Hough, Douglas E; Sylvia, Martha L; Dunbar, Linda J; Frick, Kevin D

2018-02-08

To illustrate the impact of key quasi-experimental design elements on cost savings measurement for population health management (PHM) programs. Population health management program records and Medicaid claims and enrollment data from December 2011 through March 2016. The study uses a difference-in-difference design to compare changes in cost and utilization outcomes between program participants and propensity score-matched nonparticipants. Comparisons of measured savings are made based on (1) stable versus dynamic population enrollment and (2) all eligible versus enrolled-only participant definitions. Options for the operationalization of time are also discussed. Individual-level Medicaid administrative and claims data and PHM program records are used to match study groups on baseline risk factors and assess changes in costs and utilization. Savings estimates are statistically similar but smaller in magnitude when eliminating variability based on duration of population enrollment and when evaluating program impact on the entire target population. Measurement in calendar time, when possible, simplifies interpretability. Program evaluation design elements, including population stability and participant definitions, can influence the estimated magnitude of program savings for the payer and should be considered carefully. Time specifications can also affect interpretability and usefulness. © Health Research and Educational Trust.

Kids in the city study: research design and methodology

PubMed Central

2011-01-01

Background Physical activity is essential for optimal physical and psychological health but substantial declines in children's activity levels have occurred in New Zealand and internationally. Children's independent mobility (i.e., outdoor play and traveling to destinations unsupervised), an integral component of physical activity in childhood, has also declined radically in recent decades. Safety-conscious parenting practices, car reliance and auto-centric urban design have converged to produce children living increasingly sedentary lives. This research investigates how urban neighborhood environments can support or enable or restrict children's independent mobility, thereby influencing physical activity accumulation and participation in daily life. Methods/Design The study is located in six Auckland, New Zealand neighborhoods, diverse in terms of urban design attributes, particularly residential density. Participants comprise 160 children aged 9-11 years and their parents/caregivers. Objective measures (global positioning systems, accelerometers, geographical information systems, observational audits) assessed children's independent mobility and physical activity, neighborhood infrastructure, and streetscape attributes. Parent and child neighborhood perceptions and experiences were assessed using qualitative research methods. Discussion This study is one of the first internationally to examine the association of specific urban design attributes with child independent mobility. Using robust, appropriate, and best practice objective measures, this study provides robust epidemiological information regarding the relationships between the built environment and health outcomes for this population. PMID:21781341

All-solid-state radiometers for environmental studies to 700 GHz

NASA Technical Reports Server (NTRS)

Zimmermann, Ralph; Zimmermann, Ruediger; Zimmermann, Peter

1992-01-01

We report results with an all-solid-state radiometer for measurements of the ClO molecule at 649 GHz. The project is part of a program to provide low-noise, low-weight, low-power radiometers for space operation, and special effort has been expended on the development of high-efficiency solid-state frequency multipliers and Schottky-barrier mixers with low local oscillator power requirements. The best measured system noise temperature was 1750 K with the mixer and preamplifier cooled to 77 K. The mixer diode was easily pumped into saturation, indicating that the design has excellent prospects of operating at higher frequencies - our present design goal being 1 THz. We comment on the principal design features of such systems and will report on stratospheric measurements performed with this system.

A Concealed Information Test with multimodal measurement.

PubMed

Ambach, Wolfgang; Bursch, Stephanie; Stark, Rudolf; Vaitl, Dieter

2010-03-01

A Concealed Information Test (CIT) investigates differential physiological responses to deed-related (probe) vs. irrelevant items. The present study focused on the detection of concealed information using simultaneous recordings of autonomic and brain electrical measures. As a secondary issue, verbal and pictorial presentations were compared with respect to their influence on the recorded measures. Thirty-one participants underwent a mock-crime scenario with a combined verbal and pictorial presentation of nine items. The subsequent CIT, designed with respect to event-related potential (ERP) measurement, used a 3-3.5s interstimulus interval. The item presentation modality, i.e. pictures or written words, was varied between subjects; no response was required from the participants. In addition to electroencephalogram (EEG), electrodermal activity (EDA), electrocardiogram (ECG), respiratory activity, and finger plethysmogram were recorded. A significant probe-vs.-irrelevant effect was found for each of the measures. Compared to sole ERP measurement, the combination of ERP and EDA yielded incremental information for detecting concealed information. Although, EDA per se did not reach the predictive value known from studies primarily designed for peripheral physiological measurement. Presentation modality neither influenced the detection accuracy for autonomic measures nor EEG measures; this underpins the equivalence of verbal and pictorial item presentation in a CIT, regardless of the physiological measures recorded. Future studies should further clarify whether the incremental validity observed in the present study reflects a differential sensitivity of ERP and EDA to different sub-processes in a CIT. Copyright 2009 Elsevier B.V. All rights reserved.

Designing Intervention Studies: Selected Populations, Range Restrictions, and Statistical Power

PubMed Central

Miciak, Jeremy; Taylor, W. Pat; Stuebing, Karla K.; Fletcher, Jack M.; Vaughn, Sharon

2016-01-01

An appropriate estimate of statistical power is critical for the design of intervention studies. Although the inclusion of a pretest covariate in the test of the primary outcome can increase statistical power, samples selected on the basis of pretest performance may demonstrate range restriction on the selection measure and other correlated measures. This can result in attenuated pretest-posttest correlations, reducing the variance explained by the pretest covariate. We investigated the implications of two potential range restriction scenarios: direct truncation on a selection measure and indirect range restriction on correlated measures. Empirical and simulated data indicated direct range restriction on the pretest covariate greatly reduced statistical power and necessitated sample size increases of 82%–155% (dependent on selection criteria) to achieve equivalent statistical power to parameters with unrestricted samples. However, measures demonstrating indirect range restriction required much smaller sample size increases (32%–71%) under equivalent scenarios. Additional analyses manipulated the correlations between measures and pretest-posttest correlations to guide planning experiments. Results highlight the need to differentiate between selection measures and potential covariates and to investigate range restriction as a factor impacting statistical power. PMID:28479943

Designing Intervention Studies: Selected Populations, Range Restrictions, and Statistical Power.

PubMed

Miciak, Jeremy; Taylor, W Pat; Stuebing, Karla K; Fletcher, Jack M; Vaughn, Sharon

2016-01-01

An appropriate estimate of statistical power is critical for the design of intervention studies. Although the inclusion of a pretest covariate in the test of the primary outcome can increase statistical power, samples selected on the basis of pretest performance may demonstrate range restriction on the selection measure and other correlated measures. This can result in attenuated pretest-posttest correlations, reducing the variance explained by the pretest covariate. We investigated the implications of two potential range restriction scenarios: direct truncation on a selection measure and indirect range restriction on correlated measures. Empirical and simulated data indicated direct range restriction on the pretest covariate greatly reduced statistical power and necessitated sample size increases of 82%-155% (dependent on selection criteria) to achieve equivalent statistical power to parameters with unrestricted samples. However, measures demonstrating indirect range restriction required much smaller sample size increases (32%-71%) under equivalent scenarios. Additional analyses manipulated the correlations between measures and pretest-posttest correlations to guide planning experiments. Results highlight the need to differentiate between selection measures and potential covariates and to investigate range restriction as a factor impacting statistical power.

Design, construction, characterization and use of a detector to measure time of flight of cosmic rays

NASA Astrophysics Data System (ADS)

Araujo, A. C.; Félix, J.

2016-10-01

In the study of cosmic rays, measurements of time of flight and momentum have been used to identify incident particles from its physical properties, like mass. In this poster we present the design, construction, characterization, and operation of a detector to measure time of flight of cosmic rays. The device is comprised of three plates of plastic scintillator arranged in vertical straight line, they are coupled to one photomultiplier tube. The analogical output has been connected to a data acquisition system to obtain the number of digital pulses per millisecond. We present preliminary results.

The GAENE--Generalized Acceptance of EvolutioN Evaluation: Development of a New Measure of Evolution Acceptance

ERIC Educational Resources Information Center

Smith, Mike U.; Snyder, Scott W.; Devereaux, Randolph S.

2016-01-01

The present study reports the development of a brief, quantitative, web-based, psychometrically sound measure--the Generalized Acceptance of EvolutioN Evaluation (GAENE, pronounced "gene") in a format that is useful in large and small groups, in research, and in classroom settings. The measure was designed to measure only evolution…

Hybrid overlay metrology with CDSEM in a BEOL patterning scheme

NASA Astrophysics Data System (ADS)

Leray, Philippe; Jehoul, Christiane; Inoue, Osamu; Okagawa, Yutaka

2015-03-01

Overlay metrology accuracy is a major concern for our industry. Advanced logic process require more tighter overlay control for multipatterning schemes. TIS (Tool Induced Shift) and WIS (Wafer Induced Shift) are the main issues for IBO (Image Based Overlay) and DBO (Diffraction Based Overlay). Methods of compensation have been introduced, some are even very efficient to reduce these measured offsets. Another related question is about the overlay target designs. These targets are never fully representative of the design rules, strong efforts have been achieved, but the device cannot be completely duplicated. Ideally, we would like to measure in the device itself to verify the real overlay value. Top down CDSEM can measure critical dimensions of any structure, it is not dependent of specific target design. It can also measure the overlay errors but only in specific cases like LELE (Litho Etch Litho Etch) after final patterning. In this paper, we will revisit the capability of the CDSEM at final patterning by measuring overlay in dedicated targets as well as inside a logic and an SRAM design. In the dedicated overlay targets, we study the measurement differences between design rules gratings and relaxed pitch gratings. These relaxed pitch which are usually used in IBO or DBO targets. Beyond this "simple" LELE case, we will explore the capability of the CDSEM to measure overlay even if not at final patterning, at litho level. We will assess the hybridization of DBO and CDSEM for reference to optical tools after final patterning. We will show that these reference data can be used to validate the DBO overlay results (correctables and residual fingerprints).

Characterizing Mathematics Classroom Practice: Impact of Observation and Coding Choices

ERIC Educational Resources Information Center

Ing, Marsha; Webb, Noreen M.

2012-01-01

Large-scale observational measures of classroom practice increasingly focus on opportunities for student participation as an indicator of instructional quality. Each observational measure necessitates making design and coding choices on how to best measure student participation. This study investigated variations of coding approaches that may be…

Personal Accountability in Education: Measure Development and Validation

ERIC Educational Resources Information Center

Rosenblatt, Zehava

2017-01-01

Purpose: The purpose of this paper, three-study research project, is to establish and validate a two-dimensional scale to measure teachers' and school administrators' accountability disposition. Design/methodology/approach: The scale items were developed in focus groups, and the final measure was tested on various samples of Israeli teachers and…

Designer Diamonds: Applications in Iron-based Superconductors and Lanthanides

NASA Astrophysics Data System (ADS)

Vohra, Yogesh

2013-06-01

This talk will focus on the recent progress in the fabrication of designer diamond anvils as well as scientific applications of these diamonds in static high pressure research. The two critical parameters that have emerged in the microwave plasma chemical vapor deposition of designer diamond anvils are (1) the precise [100] alignment of the starting diamond substrate and (2) balancing the competing roles of parts per million levels of nitrogen and oxygen in the diamond growth plasma. The control of these parameters results in the fabrication of high quality designer diamonds with culet size in excess of 300 microns in diameter. The three different applications of designer diamond anvils will be discussed (1) simultaneous electrical resistance and crystal structure measurements using a synchrotron source on Iron-based superconductors with data on both electron and hole doped BaFe2As2 materials and other novel superconducting materials (2) high-pressure high-temperature melting studies on metals using eight-probe Ohmic heating designer diamonds and (3) high pressure low temperature studies on magnetic behavior of 4f-lanthanide metals using four-probe electrical resistance measurements and complementary neutron diffraction studies on a spallation neutron source. Future opportunities in boron-doped conducting designer diamond anvils as well as fabrication of two-stage designer diamonds for ultra high pressure experiments will also be presented. This work was supported by the Department of Energy (DOE) - National Nuclear Security Administration (NNSA) under Grant No. DE-FG52-10NA29660.

Earth Observing Scanning Polarimeter (EOSP), phase B

NASA Technical Reports Server (NTRS)

1990-01-01

Evaluations performed during a Phase B study directed towards defining an optimal design for the Earth Observing Scanning Polarimeter (EOSP) instrument is summarized. An overview of the experiment approach is included which provides a summary of the scientific objectives, the background of the measurement approach, and the measurement method. In the instrumentation section, details of the design are discussed starting with the key instrument features required to accomplish the scientific objectives and a system characterization in terms of the Stokes vector/Mueller matrix formalism. This is followed by a detailing of the instrument design concept, the design of the individual elements of the system, the predicted performance, and a summary of appropriate instrument testing and calibration. The selected design makes use of key features of predecessor polarimeters and is fully compatible with the Earth Observing System spacecraft requirements.

A Meteorological (humidity, temperature, aerosols)) mobile dial system: Concepts and design

NASA Technical Reports Server (NTRS)

Cahen, C.; Lesne, J. L.; Benard, J.; Ponsardin, P.

1986-01-01

Since 1982 a program was conducted to develop a mobile meteorological (humidity, temperature, aerosols) Differential Absorption Lidar (DIAL) devoted to the studies of the nuclear power plant atmospheric surroundings. The measurement objectives are defined according to the user needs and the lidar feasibility. The concepts and design adopted to meet both the requirement and the measurement objectives are described. Each sub-system is addressed sequentially: transmitting system, receiving system, detection system, and post detection.

Optimization techniques applied to passive measures for in-orbit spacecraft survivability

NASA Technical Reports Server (NTRS)

Mog, Robert A.; Price, D. Marvin

1987-01-01

Optimization techniques applied to passive measures for in-orbit spacecraft survivability, is a six-month study, designed to evaluate the effectiveness of the geometric programming (GP) optimization technique in determining the optimal design of a meteoroid and space debris protection system for the Space Station Core Module configuration. Geometric Programming was found to be superior to other methods in that it provided maximum protection from impact problems at the lowest weight and cost.

Apparatus for Measurements of Time and Space Correlation

NASA Technical Reports Server (NTRS)

Favre, Alexandre; Gaviglio, J; Dumas, R

1955-01-01

A brief review is made of improvements to an experimental apparatus for time and space correlation designed for study of turbulence. Included is a description of the control of the measurements and a few particular applications.

Construction and Validation of a Scale to Measure Maslow's Concept of Self-Actualization

ERIC Educational Resources Information Center

Jones, Kenneth Melvin; Randolph, Daniel Lee

1978-01-01

Designed to measure self-actualization as defined by Abraham Maslow, the Jones Self Actualizing Scale, as assessed in this study, possesses content validity, reliability, and a number of other positive characteristics. (JC)

Measures of precision for dissimilarity-based multivariate analysis of ecological communities

PubMed Central

Anderson, Marti J; Santana-Garcon, Julia

2015-01-01

Ecological studies require key decisions regarding the appropriate size and number of sampling units. No methods currently exist to measure precision for multivariate assemblage data when dissimilarity-based analyses are intended to follow. Here, we propose a pseudo multivariate dissimilarity-based standard error (MultSE) as a useful quantity for assessing sample-size adequacy in studies of ecological communities. Based on sums of squared dissimilarities, MultSE measures variability in the position of the centroid in the space of a chosen dissimilarity measure under repeated sampling for a given sample size. We describe a novel double resampling method to quantify uncertainty in MultSE values with increasing sample size. For more complex designs, values of MultSE can be calculated from the pseudo residual mean square of a permanova model, with the double resampling done within appropriate cells in the design. R code functions for implementing these techniques, along with ecological examples, are provided. PMID:25438826

Characterization of a Raman spectroscopy probe system for intraoperative brain tissue classification

PubMed Central

Desroches, Joannie; Jermyn, Michael; Mok, Kelvin; Lemieux-Leduc, Cédric; Mercier, Jeanne; St-Arnaud, Karl; Urmey, Kirk; Guiot, Marie-Christine; Marple, Eric; Petrecca, Kevin; Leblond, Frédéric

2015-01-01

A detailed characterization study is presented of a Raman spectroscopy system designed to maximize the volume of resected cancer tissue in glioma surgery based on in vivo molecular tissue characterization. It consists of a hand-held probe system measuring spectrally resolved inelastically scattered light interacting with tissue, designed and optimized for in vivo measurements. Factors such as linearity of the signal with integration time and laser power, and their impact on signal to noise ratio, are studied leading to optimal data acquisition parameters. The impact of ambient light sources in the operating room is assessed and recommendations made for optimal operating conditions. In vivo Raman spectra of normal brain, cancer and necrotic tissue were measured in 10 patients, demonstrating that real-time inelastic scattering measurements can distinguish necrosis from vital tissue (including tumor and normal brain tissue) with an accuracy of 87%, a sensitivity of 84% and a specificity of 89%. PMID:26203368

Design of helicopter rotors to noise constraints

NASA Technical Reports Server (NTRS)

Schaeffer, E. G.; Sternfeld, H., Jr.

1978-01-01

Results of the initial phase of a research project to study the design constraints on helicopter noise are presented. These include the calculation of nonimpulsive rotor harmonic and broadband hover noise spectra, over a wide range of rotor design variables and the sensitivity of perceived noise level (PNL) to changes in rotor design parameters. The prediction methodology used correlated well with measured whirl tower data. Application of the predictions to variations in rotor design showed tip speed and thrust as having the most effect on changing PNL.

Subepidermal moisture surrounding pressure ulcers in persons with a spinal cord injury: A pilot study

PubMed Central

Harrow, Jeffrey John; Mayrovitz, Harvey N.

2014-01-01

Objective Characterization of a non-invasive method of quantifying subepidermal moisture (SEM) surrounding stages III and IV pressure ulcers (PrUs) in spinal cord injury (SCI). Design Prospective, single-visit, single-rater, observational study, using repeated-measures analysis. Method Setting-inpatient units of one VA SCI Center. Participants Convenience sample of 16 subjects with SCI with stage III or IV PrUs over sacrum or ischium. Interventions Measurement with the MoistureMeter-D, a hand-held device using 300 MHz electromagnetic waves. Outcome measures Dielectric constant, a dimensionless number which increases with the moisture content. Each subject had a PrU site and a control site. Measurements were made at each site, on intact skin, at four points spaced angularly around the site, in triplicate. Results (1) Short-term, single-rater relative error was 2.5%. (2) Order effect: first readings were higher than second readings in 55 of 64 measurement sets. Order effect was significant for control sites (P < 0.0001) but not for PrU sites. (3) Angular effect: SEM varied by angle at the PrU sites (P < 0.01); 12 o'clock position the highest and 6 o'clock the lowest. (4) Ability to differentiate PrUs from intact skin: SEM at PrU sites was greater by 9.0% than control sites (P < 0.05). (5) Site effect: SEM was higher at sacral locations than ischial at control sites by 20% (P < 0.005). Conclusions SEM differentiates PrUs from intact skin. Future study designs must take into account order, angular, and site effects on this measure. This information will inform designers of future studies of SEM in healing of PrUs. PMID:25398030

FACTORS INFLUENCING THE DESIGN OF BIOACCUMULATION FACTOR AND BIOTA-SEDIMENT ACCUMULATION FACTOR FIELD STUDIES

EPA Science Inventory

A series of modeling simulations were performed to develop an understanding of the underlying factors and principles involved in developing field sampling designs for measuring bioaccumulation factors (BAFs) and biota-sediment accumulation factors (BSAFs. These simulations reveal...

Micro-Viscometer for Measuring Shear-Varying Blood Viscosity over a Wide-Ranging Shear Rate.

PubMed

Kim, Byung Jun; Lee, Seung Yeob; Jee, Solkeun; Atajanov, Arslan; Yang, Sung

2017-06-20

In this study, a micro-viscometer is developed for measuring shear-varying blood viscosity over a wide-ranging shear rate. The micro-viscometer consists of 10 microfluidic channel arrays, each of which has a different micro-channel width. The proposed design enables the retrieval of 10 different shear rates from a single flow rate, thereby enabling the measurement of shear-varying blood viscosity with a fixed flow rate condition. For this purpose, an optimal design that guarantees accurate viscosity measurement is selected from a parametric study. The functionality of the micro-viscometer is verified by both numerical and experimental studies. The proposed micro-viscometer shows 6.8% (numerical) and 5.3% (experimental) in relative error when compared to the result from a standard rotational viscometer. Moreover, a reliability test is performed by repeated measurement (N = 7), and the result shows 2.69 ± 2.19% for the mean relative error. Accurate viscosity measurements are performed on blood samples with variations in the hematocrit (35%, 45%, and 55%), which significantly influences blood viscosity. Since the blood viscosity correlated with various physical parameters of the blood, the micro-viscometer is anticipated to be a significant advancement for realization of blood on a chip.

Does exercise impact on sleep for people who have rheumatoid arthritis? A systematic review.

PubMed

McKenna, Sean; Donnelly, Alan; Fraser, Alexander; Comber, Laura; Kennedy, Norelee

2017-06-01

To systematically search for the availability of evidence for exercise impacting on sleep for people who have rheumatoid arthritis. Two reviewers independently searched seven electronic databases, identified and extracted relevant studies by applying eligibility criteria. Sources of bias were assessed independently by two reviewers using the Cochrane bias assessment tool for randomized controlled trials (RCTs) and Newcastle-Ottawa Quality Assessment Scale for non-RCTs. Data were synthesized using a level of evidence approach. Meta-analyses were deemed to be inappropriate due to the heterogeneity of study designs, measurement tools and interventions. Five studies were included: one RCT; two pilot RCTs and two samples of convenience. A total of 262 people with RA were included. Interventions used were difficult to assess due to the heterogeneity of study designs and the inclusion of two using different types of yoga as an intervention. Different sleep outcome measures were used thus, it was not feasible to pool results. Studies had a high risk of bias. This review could find no consistent or conclusive evidence on whether exercise impacts on sleep in people who have rheumatoid arthritis, therefore no firm conclusions can be made. However, there is some indication that exercise may have positive benefits on sleep in people who have rheumatoid arthritis. Further studies with improved study designs, using subjective and objective measures, are needed.

Methodological framework for the ergonomic design of children's playground equipment: a Serbian experience.

PubMed

Grozdanovic, Miroljub; Jekic, Savko; Stojiljkovic, Evica

2014-01-01

Adequate application of the static and dynamic anthropometric measures of pre-school children in ergonometric design of children's playground equipment should eliminate all dangers and difficulties in their use. Possibilities of injuries, insecure movements, discomfort able positions and some other dangerous actions may be minimized; and safety and health protection of pre-school children will be increased. Children's playground represents a significant space of activity for pre-school children. Therefore, it is necessary to apply ergonomic principles which contribute to the adjustment of the playground elements to children's anatomic features. Based on the results presented in this paper, new constructions were designed and new playgrounds were installed in Serbia. Participants were children from three pre-school age groups: Junior age group (3-4 years of age, 17 children), Medium age group (4-5 years of age, 22 children), and Senior age group (5-6 years of age, 26 children). Thirty-one static anthropometric measures (12 in standing position, 11 in sitting position, 7 related to dimensions of hand, foot an head, with body weight and shoe size) and 15 dynamic anthropometric measures (7 in standing position, 6 in sitting position and 2 dimension of foot and hand) were defined for the study. Measurements were taken using an anthrop-meter, a flexible measuring tape. Equations for ergonomic design of children's playground elements were also defined. Basic statistical data of static and dynamic anthropometric measurements of the pre-school children are presented in this paper, as well as the statistical calculation of the corrective anthropometric measurements. Measurements were performed in "Poletarac" kindergarten, part of the pre-school institution "Radost" in Cacak. Elements of playground equipment in "Bambi" kindergarten in Kragujevac (the Indian tent "wigwam", gate-house, swing and carousel) were designed and built using these parameters. Based on the obtained results, several playgrounds were designed, manufactured and equipped with the appropriate items.

The early development of stereotypy and self-injury: a review of research methods.

PubMed

Symons, F J; Sperry, L A; Dropik, P L; Bodfish, J W

2005-02-01

The origin and developmental course of stereotypic and self-injurious behaviour among individuals with developmental disabilities such as intellectual disability (ID) or pervasive development disorders such as autism is not well understood. Twelve studies designed to document the prevalence, nature, or development of stereotypic and/or self-injurious behaviour in children under 5 years of age and identified as at risk for developmental delay or disability were reviewed. Comparisons were made with similar studies with typically developing children. It appears that the onset of naturally occurring rhythmic motor stereotypies is delayed in young at-risk children, but that the sequencing may be similar. A very small database, differences in samples, measures, and designs limited the degree to which comparisons could be made across studies. Future work is needed based on appropriately designed prospective comparison studies and uniform quantitative measures to provide an empirical basis for new knowledge about the early development of one of the most serious behaviour disorders afflicting children with ID and related problems of development.

Spreading activation in nonverbal memory networks.

PubMed

Foster, Paul S; Wakefield, Candias; Pryjmak, Scott; Roosa, Katelyn M; Branch, Kaylei K; Drago, Valeria; Harrison, David W; Ruff, Ronald

2017-09-01

Theories of spreading activation primarily involve semantic memory networks. However, the existence of separate verbal and visuospatial memory networks suggests that spreading activation may also occur in visuospatial memory networks. The purpose of the present investigation was to explore this possibility. Specifically, this study sought to create and describe the design frequency corpus and to determine whether this measure of visuospatial spreading activation was related to right hemisphere functioning and spreading activation in verbal memory networks. We used word frequencies taken from the Controlled Oral Word Association Test and design frequencies taken from the Ruff Figural Fluency Test as measures of verbal and visuospatial spreading activation, respectively. Average word and design frequencies were then correlated with measures of left and right cerebral functioning. The results indicated that a significant relationship exists between performance on a test of right posterior functioning (Block Design) and design frequency. A significant negative relationship also exists between spreading activation in semantic memory networks and design frequency. Based on our findings, the hypotheses were supported. Further research will need to be conducted to examine whether spreading activation exists in visuospatial memory networks as well as the parameters that might modulate this spreading activation, such as the influence of neurotransmitters.

Psychometric testing on the NLN Student Satisfaction and Self-Confidence in Learning, Simulation Design Scale, and Educational Practices Questionnaire using a sample of pre-licensure novice nurses.

PubMed

Franklin, Ashley E; Burns, Paulette; Lee, Christopher S

2014-10-01

In 2006, the National League for Nursing published three measures related to novice nurses' beliefs about self-confidence, scenario design, and educational practices associated with simulation. Despite the extensive use of these measures, little is known about their reliability and validity. The psychometric properties of the Student Satisfaction and Self-Confidence in Learning Scale, Simulation Design Scale, and Educational Practices Questionnaire were studied among a sample of 2200 surveys completed by novice nurses from a liberal arts university in the southern United States. Psychometric tests included item analysis, confirmatory and exploratory factor analyses in randomly-split subsamples, concordant and discordant validity, and internal consistency. All three measures have sufficient reliability and validity to be used in education research. There is room for improvement in content validity with the Student Satisfaction and Self-Confidence in Learning and Simulation Design Scale. This work provides robust evidence to ensure that judgments made about self-confidence after simulation, simulation design and educational practices are valid and reliable. Copyright © 2014 Elsevier Ltd. All rights reserved.

Social cohesion through football: a quasi-experimental mixed methods design to evaluate a complex health promotion program.

PubMed

Nathan, Sally; Bunde-Birouste, Anne; Evers, Clifton; Kemp, Lynn; MacKenzie, Julie; Henley, Robert

2010-10-05

Social isolation and disengagement fragments local communities. Evidence indicates that refugee families are highly vulnerable to social isolation in their countries of resettlement. Research to identify approaches to best address this is needed. Football United is a program that aims to foster social inclusion and cohesion in areas with high refugee settlement in New South Wales, Australia, through skills and leadership development, mentoring, and the creation of links with local community and corporate leaders and organisations. The Social Cohesion through Football study's broad goal is to examine the implementation of a complex health promotion program, and to analyse the processes involved in program implementation. The study will consider program impact on individual health and wellbeing, social inclusion and cohesion, as well as analyse how the program by necessity interacts and adapts to context during implementation, a concept we refer to as plasticity. The proposed study will be the first prospective cohort impact study to our knowledge to assess the impact of a comprehensive integrated program using football as a vehicle for fostering social inclusion and cohesion in communities with high refugee settlement. A quasi-experimental cohort study design with treatment partitioning involving four study sites. The study employs a 'dose response' model, comparing those with no involvement in the Football United program with those with lower or higher levels of participation. A range of qualitative and quantitative measures will be used in the study. Study participants' emotional well being, resilience, ethnic identity and other group orientation, feelings of social inclusion and belonging will be measured using a survey instrument complemented by relevant data drawn from in-depth interviews, self reporting measures and participant observation. The views of key informants from the program and the wider community will also be solicited. The complexity of the Football United program poses challenges for measurement, and requires the study design to be responsive to the dynamic nature of the program and context. Assessment of change is needed at multiple levels, drawing on mixed methods and multidisciplinary approaches in implementation and evaluation. Attention to these challenges has underpinned the design and methods in the Social Cohesion through Football study, which will use a unique and innovative combination of measures that have not been applied together previously in social inclusion/cohesion and sport and social inclusion/cohesion program research.

A Pilot Study of the Relationship between Counselor Trainees' Characteristics and Attitudes toward Substance Abuse

ERIC Educational Resources Information Center

Koch, D. Shane; Sneed, Zachery; Davis, Sharon J.; Benshoff, John J.

2006-01-01

Researchers in this study sought to construct an instrument specifically designed to measure counselor trainee attitudes toward alcohol and drug abuse. The instrument, the "Counselor Trainee Attitudes Measure" (CTAM), used for this research was developed collectively by the researchers. The CTAM gathered demographic data including undergraduate or…

Measuring Student Learning in Social Statistics: A Pretest-Posttest Study of Knowledge Gain

ERIC Educational Resources Information Center

Delucchi, Michael

2014-01-01

This study used a pretest-posttest design to measure student learning in undergraduate statistics. Data were derived from 185 students enrolled in six different sections of a social statistics course taught over a seven-year period by the same sociology instructor. The pretest-posttest instrument reveals statistically significant gains in…

Developing an Assessment Instrument to Measure Early Elementary Teachers' Mathematical Knowledge for Teaching

ERIC Educational Resources Information Center

Schoen, Robert C.; Bray, Wendy; Wolfe, Christopher; Tazaz, Amanda M.; Nielsen, Lynne

2017-01-01

This study reports on the development and field study of K-TEEM, a web-based assessment instrument designed to measure mathematical knowledge for teaching (MKT) at the early elementary level. The development process involved alignment with early elementary curriculum standards, expert review of items and scoring criteria, cognitive interviews with…

Student Achievement as a Measure of Instructor Effectiveness.

ERIC Educational Resources Information Center

Morsch, Joseph E.; And Others

Using an eight-day hydraulics maintenance course taught by 121 instructors on a regular basis to classes of about 14 students using the same classrooms and materials, the Air Force conducted a study designed to determine instructor measures which correlate with, and are therefore predictive of, student achievement. The study report first discusses…

Construction of an Instrument to Measure Social Valuation in an Emerging Market Context

ERIC Educational Resources Information Center

Katono, Isaac Wasswa

2011-01-01

Purpose: This study aims to construct a parsimonious instrument to measure social valuation in a collective setting using Uganda as an example. Design/methodology/approach: A triangulation technique was used in this study. Conversations with students, parents, teaching and non-teaching staff at Uganda Christian University (UCU) main campus were…

Sweating rates of dairy cows and beef heifers in hot conditions

USDA-ARS?s Scientific Manuscript database

Sweating rates from heat-stressed dairy and feedlot cows were measured using a “Portable Calorimeter” and a “Bovine Evaporation Meter” designed and fabricated for the studies reported herein. Measurements were taken when cows were in their natural habitat. The focus of the study was to compare swea...

CHARACTERIZATION OF THE FUGITIVE MERCURY EMISSIONS AT A CHLOR-ALKALI PLANT. OVERALL STUDY DESIGN

EPA Science Inventory

The paper discusses a detailed emissions measurement campaign that was conducted over a 9-day period within a mercury (Hg) cell chlor-alkali plant in the southeastern United States (U.S.). The principal focus of this study was to measure fugitive (non-ducted) airborne Hg emission...

A Cross-Cultural Study of Self-Report Depressive Symptoms among College Students.

ERIC Educational Resources Information Center

Crittenden, Kathleen S.; And Others

1992-01-01

A study of self-report depressive symptoms measured by the Zung Self-Rating Depression Scale was conducted in Korea, the Philippines, Taiwan, and the United States with 953 college students. There are marked differences among countries in symptoms reported. Research designs and measurement strategies for cross-cultural research are discussed. (SLD)

Charlotte Attitudes towards Sleep (CATS) Scale: A Validated Measurement Tool for College Students

ERIC Educational Resources Information Center

Peach, Hannah; Gaultney, Jane F.

2017-01-01

Objective: Using a 4-phase study design, the present study developed and tested the Charlotte Attitudes Towards Sleep (CATS) Scale, a measurement tool for assessing sleep attitudes in college students. Participants: Participants were 706 undergraduate students recruited at a southeastern university and on a national recruitment Web site between…

Measuring Spatial Ability with a Computer Managed Task.

ERIC Educational Resources Information Center

McDaniel, Ernest; And Others

This study presents data augmenting the validity studies of the Wheatley Cube (McDaniel and Kroll, 1984), a computer managed test of spatial visualization. Twenty-one students in pilot training are administered several instruments designed to measure the ability to construct a cognitive three-dimensional space, including: (1) the Wheatley Cube,…

NASA Cold Land Processes Experiment (CLPX 2002/03): Local scale observation site

Treesearch

Janet Hardy; Robert Davis; Yeohoon Koh; Don Cline; Kelly Elder; Richard Armstrong; Hans-Peter Marshall; Thomas Painter; Gilles Castres Saint-Martin; Roger DeRoo; Kamal Sarabandi; Tobias Graf; Toshio Koike; Kyle McDonald

2008-01-01

The local scale observation site (LSOS) is the smallest study site (0.8 ha) of the 2002/03 Cold Land Processes Experiment (CLPX) and is located within the Fraser mesocell study area. It was the most intensively measured site of the CLPX, and measurements here had the greatest temporal component of all CLPX sites. Measurements made at the LSOS were designed to produce a...

Online course design for teaching critical thinking.

PubMed

Schaber, Patricia; Shanedling, Janet

2012-01-01

Teaching critical thinking (CT) skills, a goal in higher education, is seldom considered in the primary design of either classroom or online courses, and is even less frequently measured in student learning. In health professional education, CT along with clinical reasoning skills is essential for the development of clinical practitioners. This study, measuring CT skill development in an online theory course, supports using a cyclical course design to build higher level processes in student thinking. Eighty-six Masters of Occupational Therapy students in four sections of an occupation-based theory course were evaluated on elements in the Paul and Elder CT Model throughout the course and surveyed for their perceptions in their ability to think critically at course completion. Results of this study demonstrated that the online theory course design contributed to improving critical thinking skills and student's perceived CT skill development as applicable to their future professional practice. In a focus group, eight students identified four effective course design features that contributed to their CT skill development: highly structured learning, timely feedback from instructor, repetition of assignments, and active engagement with the material.

Evaluation of Plume Divergence and Facility Effects on Far-Field Faraday Probe Current Density Profiles

DTIC Science & Technology

2009-09-01

elevated background pressure, compared nude Faraday probe designs, and evaluated design modifications to minimize uncertainty due to charge exchange...evaluated Faraday probe design and facility background pressure on collected ion current. A comparison of two nude Faraday probe designs concluded...140.5 Plasma potential in the region surrounding a nude Faraday probe has been measured to study the possibility of probe bias voltage acting as a

Using high-fidelity computational fluid dynamics to help design a wind turbine wake measurement experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Churchfield, M.; Wang, Q.; Scholbrock, A.

Here, we describe the process of using large-eddy simulations of wind turbine wake flow to help design a wake measurement campaign. The main goal of the experiment is to measure wakes and wake deflection that result from intentional yaw misalignment under a variety of atmospheric conditions at the Scaled Wind Farm Technology facility operated by Sandia National Laboratories in Lubbock, Texas. Prior simulation studies have shown that wake deflection may be used for wind-plant control that maximizes plant power output. In this study, simulations are performed to characterize wake deflection and general behavior before the experiment is performed to ensuremore » better upfront planning. Beyond characterizing the expected wake behavior, we also use the large-eddy simulation to test a virtual version of the lidar we plan to use to measure the wake and better understand our lidar scan strategy options. This work is an excellent example of a 'simulation-in-the-loop' measurement campaign.« less

Using High-Fidelity Computational Fluid Dynamics to Help Design a Wind Turbine Wake Measurement Experiment

NASA Astrophysics Data System (ADS)

Churchfield, M.; Wang, Q.; Scholbrock, A.; Herges, T.; Mikkelsen, T.; Sjöholm, M.

2016-09-01

We describe the process of using large-eddy simulations of wind turbine wake flow to help design a wake measurement campaign. The main goal of the experiment is to measure wakes and wake deflection that result from intentional yaw misalignment under a variety of atmospheric conditions at the Scaled Wind Farm Technology facility operated by Sandia National Laboratories in Lubbock, Texas. Prior simulation studies have shown that wake deflection may be used for wind-plant control that maximizes plant power output. In this study, simulations are performed to characterize wake deflection and general behavior before the experiment is performed to ensure better upfront planning. Beyond characterizing the expected wake behavior, we also use the large-eddy simulation to test a virtual version of the lidar we plan to use to measure the wake and better understand our lidar scan strategy options. This work is an excellent example of a “simulation-in-the-loop” measurement campaign.

Physical and Psychological Effects of Head Treatment in the Supine Position Using Specialized Ayurveda-Based Techniques

PubMed Central

Iwawaki, Yoko; Uebaba, Kazuo; Yamamoto, Yoko; Takishita, Yukie; Harada, Kiyomi; Shibata, Akemi; Narumoto, Jin; Fukui, Kenji

2016-01-01

Abstract Objective: To clarify the physical and psychological effects of head massage performed in the supine position using Ayurveda-based techniques (head treatment). Design: Twenty-four healthy female students were included in the study. Using a crossover study design, the same participants were enrolled in both the head treatment intervention group and control group. There was an interval of 1 week or more between measurements. Outcome measures: The physiologic indices measured included blood pressure and heart rate fluctuations (high frequency and low frequency/high frequency). The psychological markers measured included liveliness, depression, and boredom using the visual analogue scale method. State anxiety was measured using the State-Trait Anxiety Inventory method. Results: The parasympathetic nerve activity increased immediately after head treatment. Upon completion of head treatment, the parasympathetic nerve predominance tended to gradually ease. Head treatment boosted freshness and relieved anxiety. Conclusions: The results suggest that head treatment has a relaxing and refreshing effect and may be used to provide comfort. PMID:27163344

Levee Scour Protection for Storm Waves

NASA Astrophysics Data System (ADS)

Johnson, E.; Sustainable; Resiliency in Levee Scour Protection

2011-12-01

Earnest Johnson, Firat Y. Testik *, Nadarajah Ravichandran Civil Engineering, Clemson University, Clemson, SC, USA * Contact author ftestik@clemson.edu Levee failure due to scouring has been a prominent occurrence among intense storm surges and waves, giving rise to the implementation of various scour protection measures over the years. This study is to investigate the levee scour and to compare different scour protection measures on a model-levee system in a laboratory wave tank. The protection measures that are tested and compared for their effectiveness in this study include turf reinforcement mats, woven geotextiles, and core-locs. This is an ongoing research effort and experiments are currently being conducted with model levees constructed based upon the United States Army Corps of Engineers' levee design and construction guidelines under various simulated storm conditions. Parameters such as wave elevations, deformation time history of the floodwall, and the scour depth are measured in each test. The finding of this research will be translated to provide effective scour protection measures for robust levee designs.

Using high-fidelity computational fluid dynamics to help design a wind turbine wake measurement experiment

DOE PAGES

Churchfield, M.; Wang, Q.; Scholbrock, A.; ...

2016-10-03

Here, we describe the process of using large-eddy simulations of wind turbine wake flow to help design a wake measurement campaign. The main goal of the experiment is to measure wakes and wake deflection that result from intentional yaw misalignment under a variety of atmospheric conditions at the Scaled Wind Farm Technology facility operated by Sandia National Laboratories in Lubbock, Texas. Prior simulation studies have shown that wake deflection may be used for wind-plant control that maximizes plant power output. In this study, simulations are performed to characterize wake deflection and general behavior before the experiment is performed to ensuremore » better upfront planning. Beyond characterizing the expected wake behavior, we also use the large-eddy simulation to test a virtual version of the lidar we plan to use to measure the wake and better understand our lidar scan strategy options. This work is an excellent example of a 'simulation-in-the-loop' measurement campaign.« less

Using Generalizability Theory to Examine the Dependability of Scores from the Learning Target Rating Scale

ERIC Educational Resources Information Center

McLaughlin, Tara W.; Snyder, Patricia A.; Algina, James

2017-01-01

The Learning Target Rating Scale (LTRS) is a measure designed to evaluate the quality of teacher-developed learning targets for embedded instruction for early learning. In the present study, we examined the measurement dependability of LTRS scores by conducting a generalizability study (G-study). We used a partially nested, three-facet model to…

Neural Substrates of the Topology Test to Measure Fluid Reasoning: An fMRI Study

ERIC Educational Resources Information Center

Masunaga, Hiromi; Kawashima, Ryuta; Horn, John L.; Sassa, Yuko; Sekiguchi, Atsushi

2008-01-01

In our prior study the negative correlation between Topology, a behavioral measure of fluid reasoning, and adult age diminished with the increase in the level of expertise in a cognitively-demanding domain of expertise in the game of GO. The present fMRI study was designed to investigate neural substrates of Topology. The modified topology…

Design and Study of a Low-Cost Laboratory Model Digital Wind Power Meter

ERIC Educational Resources Information Center

Radhakrishnan, Rugmini; Karthika, S.

2010-01-01

A vane-type low-cost laboratory model anemometer cum power meter is designed and constructed for measuring low wind energy created from accelerating fluids. The constructed anemometer is a device which records the electrical power obtained by the conversion of wind power using a wind sensor coupled to a DC motor. It is designed for its…

The Monitoring the Future Project after Four Decades: Design and Procedures. Monitoring the Future Occasional Paper Series. Paper 82

ERIC Educational Resources Information Center

Bachman, Jerald G.; Johnston, Lloyd D.; O'Malley, Patrick M.; Schulenberg, John E.; Miech, Richard A.

2015-01-01

The purpose of this paper is to provide a detailed description of the Monitoring the Future research design, including sampling design, data collection procedures, measurement content, and questionnaire format. This study assesses the changing lifestyles, values, and preferences of American youth on a continuing basis. Each year since 1975, at…

Anthropometric measurements of tibial plateau and correlation with the current tibial implants.

PubMed

Erkocak, Omer Faruk; Kucukdurmaz, Fatih; Sayar, Safak; Erdil, Mehmet Emin; Ceylan, Hasan Huseyin; Tuncay, Ibrahim

2016-09-01

The aim of the study was to make an anthropometric analysis at the resected surfaces of the proximal tibia in the Turkish population and to compare the data with the dimensions of tibial components in current use. We hypothesized that tibial components currently available on the market do not fulfil the requirements of this population and a new tibial component design may be required, especially for female patients with small stature. Anthropometric data from the proximal tibia of 226 knees in 226 Turkish subjects were measured using magnetic resonance imaging. We measured the mediolateral, middle anteroposterior, medial and lateral anteroposterior dimensions and the aspect ratio of the resected proximal tibial surface. All morphological data were compared with the dimensions of five contemporary tibial implants, including asymmetric and symmetric design types. The dimensions of the tibial plateau of Turkish knees demonstrated significant differences according to gender (P < 0.05). Among the different tibial implants reviewed, neither asymmetric nor symmetric designs exhibited a perfect conformity to proximal tibial morphology in size and shape. The vast majority of tibial implants involved in this study tend to overhang anteroposteriorly, and a statistically significant number of women (21 %, P < 0.05) had tibial anteroposterior diameters smaller than the smallest available tibial component. Tibial components designed according to anthropometric measurements of Western populations do not perfectly meet the requirements of Turkish population. These data could provide the basis for designing the optimal and smaller tibial component for this population, especially for women, is required for best fit. II.

Using experimental design to define boundary manikins.

PubMed

Bertilsson, Erik; Högberg, Dan; Hanson, Lars

2012-01-01

When evaluating human-machine interaction it is central to consider anthropometric diversity to ensure intended accommodation levels. A well-known method is the use of boundary cases where manikins with extreme but likely measurement combinations are derived by mathematical treatment of anthropometric data. The supposition by that method is that the use of these manikins will facilitate accommodation of the expected part of the total, less extreme, population. In literature sources there are differences in how many and in what way these manikins should be defined. A similar field to the boundary case method is the use of experimental design in where relationships between affecting factors of a process is studied by a systematic approach. This paper examines the possibilities to adopt methodology used in experimental design to define a group of manikins. Different experimental designs were adopted to be used together with a confidence region and its axes. The result from the study shows that it is possible to adapt the methodology of experimental design when creating groups of manikins. The size of these groups of manikins depends heavily on the number of key measurements but also on the type of chosen experimental design.

Lawyer Civil Law Study Guide

DTIC Science & Technology

1993-04-01

study guide, it is the responsibility of the student to supplement the text with independent research.. The study guide is designed to be a starting...accused was not designated as a party may not be received in evidence against the accused unless that testimony is admissible independently of the...duty is not a punitive measure. Disciplinary action, if warranted, shall be taken independently of any such determination. A favorable determination as

Amphetamine-type stimulants and HIV infection among men who have sex with men: implications on HIV research and prevention from a systematic review and meta-analysis

PubMed Central

Thu Vu, Nga Thi; Maher, Lisa; Zablotska, Iryna

2015-01-01

Introduction HIV infections and the use of amphetamine-type stimulants (ATS) among men who have sex with men (MSM) have been increasing internationally, but the role of ATS use as a co-factor for HIV infection remains unclear. We aimed to summarize the association between ATS use and HIV infection among MSM. Methods We conducted a systematic search of MEDLINE, EMBASE, GLOBAL HEALTH and PsycINFO for relevant English, peer-reviewed articles of quantitative studies published between 1980 and 25 April 2013. Pooled estimates of the association – prevalence rate ratios (PRR, cross-sectional studies), odds ratio (OR, case-control studies) and hazard ratio (HR, longitudinal studies), with 95% Confidence Intervals (CI) – were calculated using random-effects models stratified by study design and ATS group (meth/amphetamines vs. ecstasy). We assessed the existence of publication bias in funnel plots and checked for sources of heterogeneity using meta-regression and subgroup analysis. Results We identified 6710 article titles, screened 1716 abstracts and reviewed 267 full text articles. A total of 35 publications were eligible for data abstraction and meta-analysis, resulting in 56 records of ATS use. Most studies (31/35) were conducted in high-income countries. Published studies used different research designs, samples and measures of ATS use. The pooled association between meth/amphetamine use and HIV infection was statistically significant in all three designs (PRR=1.86; 95% CI: 1.57–2.17; OR=2.73; 95% CI: 2.16–3.46 and HR=3.43; 95% CI: 2.98–3.95, respectively, for cross-sectional, case-control and longitudinal studies). Ecstasy use was not associated with HIV infection in cross-sectional studies (PRR=1.15; 95% CI: 0.88–1.49; OR=3.04; 95% CI: 1.29–7.18 and HR=2.48; 95% CI: 1.42–4.35, respectively, for cross-sectional, case-control and longitudinal studies). Results in cross-sectional studies were highly heterogeneous due to issues with ATS measurement and different sampling frames. Conclusions While meth/amphetamine use was significantly associated with HIV infection among MSM in high-income countries in all study designs, evidence of the role of ecstasy in HIV infection was lacking in cross-sectional studies. Cross-sectional study design, measurement approaches and source populations may also be important modifiers of the strength and the direction of associations. Event-specific measure of individual drug is required to establish temporal relationship between ATS use and HIV infection. HIV prevention programmes targeting MSM should consider including interventions designed to address meth/amphetamine use. PMID:25609214

Biomedical and Human Factors Requirements for a Manned Earth Orbiting Station

NASA Technical Reports Server (NTRS)

Helvey, W.; Martell, C.; Peters, J.; Rosenthal, G.; Benjamin, F.; Albright, G.

1964-01-01

The primary objective of this study is to determine which biomedical and human factors measurements must be made aboard a space station to assure adequate evaluation of the astronaut's health and performance during prolonged space flights. The study has employed, where possible, a medical and engineering systems analysis to define the pertinent life sciences and space station design parameters and their influence on a measurement program. The major areas requiring evaluation in meeting the study objectives include a definition of the space environment, man's response to the environment, selection of measurement and data management techniques, experimental program, space station design requirements, and a trade-off analysis with final recommendations. The space environment factors that are believed to have a significant effect on man were evaluated. This includes those factors characteristic of the space environment (e. g. weightlessness, radiation) as well as those created within the space station (e. g. toxic contaminants, capsule atmosphere). After establishing the general features of the environment, an appraisal was made of the anticipated response of the astronaut to each of these factors. For thoroughness, the major organ systems and functions of the body were delineated, and a determination was made of their anticipated response to each of the environmental categories. A judgment was then made on the medical significance or importance of each response, which enabled a determination of which physiological and psychological effects should be monitored. Concurrently, an extensive list of measurement techniques and methods of data management was evaluated for applicability to the space station program. The various space station configurations and design parameters were defined in terms of the biomedical and human factors requirements to provide the measurements program. Research design of experimental programs for various station configurations, mission durations, and crew sizes were prepared, and, finally, a trade-off analysis of the critical variables in the station planning was completed with recommendations to enhance the confidence in the measurement program.

Evaluating nanoparticle sensor design for intracellular pH measurements.

PubMed

Benjaminsen, Rikke V; Sun, Honghao; Henriksen, Jonas R; Christensen, Nynne M; Almdal, Kristoffer; Andresen, Thomas L

2011-07-26

Particle-based nanosensors have over the past decade been designed for optical fluorescent-based ratiometric measurements of pH in living cells. However, quantitative and time-resolved intracellular measurements of pH in endosomes and lysosomes using particle nanosensors are challenging, and there is a need to improve measurement methodology. In the present paper, we have successfully carried out time-resolved pH measurements in endosomes and lyosomes in living cells using nanoparticle sensors and show the importance of sensor choice for successful quantification. We have studied two nanoparticle-based sensor systems that are internalized by endocytosis and elucidated important factors in nanosensor design that should be considered in future development of new sensors. From our experiments it is clear that it is highly important to use sensors that have a broad measurement range, as erroneous quantification of pH is an unfortunate result when measuring pH too close to the limit of the sensitive range of the sensors. Triple-labeled nanosensors with a pH measurement range of 3.2-7.0, which was synthesized by adding two pH-sensitive fluorophores with different pK(a) to each sensor, seem to be a solution to some of the earlier problems found when measuring pH in the endosome-lysosome pathway.

Physical activities at work and risk of musculoskeletal pain and its consequences: protocol for a study with objective field measures among blue-collar workers

PubMed Central

2013-01-01

Background Among blue-collar workers, high physical work demands are generally considered to be the main cause of musculoskeletal pain and work disability. However, current available research on this topic has been criticised for using self-reported data, cross-sectional design, insufficient adjustment for potential confounders, and inadequate follow-up on the recurrent and fluctuating pattern of musculoskeletal pain. Recent technological advances have provided possibilities for objective diurnal field measurements of physical activities and frequent follow-up on musculoskeletal pain. The main aim of this paper is to describe the background, design, methods, limitations and perspectives of the Danish Physical Activity cohort with Objective measurements (DPhacto) investigating the association between objectively measured physical activities capturing work and leisure time and frequent measurements of musculoskeletal pain among blue-collar workers. Methods/design Approximately 2000 blue-collar workers are invited for the study and asked to respond to a baseline questionnaire, participate in physical tests (i.e. muscle strength, aerobic fitness, back muscle endurance and flexibility), to wear accelerometers and a heart rate monitor for four consecutive days, and finally respond to monthly text messages regarding musculoskeletal pain and quarterly questionnaires regarding the consequences of musculoskeletal pain on work activities, social activities and work ability for a one-year follow-up period. Discussion This study will provide novel information on the association between physical activities at work and musculoskeletal pain. The study will provide valid and precise documentation about the relation between physical work activities and musculoskeletal pain and its consequences among blue-collar workers. PMID:23870666

Validity of activity-based devices to estimate sleep.

PubMed

Weiss, Allison R; Johnson, Nathan L; Berger, Nathan A; Redline, Susan

2010-08-15

The aim of this study was to examine the feasibility of sleep estimation using a device designed and marketed to measure core physical activity. Thirty adolescent participants in an epidemiological research study wore 3 actigraphy devices on the wrist over a single night concurrent with polysomnography (PSG). Devices used include Actical actigraph, designed and marketed for placement around the trunk to measure physical activity, in addition to 2 standard actigraphy devices used to assess sleep-wake states: Sleepwatch actigraph and Actiwatch actigraph. Sleep-wake behaviors, including total sleep time (TST) and sleep efficiency (SE), were estimated from each wrist-device and PSG. Agreements between each device were calculated using Pearson product movement correlation and Bland-Altman plots. Statistical analyses of TST revealed strong correlations between each wrist device and PSG (r = 0.822, 0.836, and 0.722 for Sleepwatch, Actiwatch, and Actical, respectively). TST measured using the Actical correlated strongly with Sleepwatch (r = 0.796), and even stronger still with Actiwatch (r = 0.955). In analyses of SE, Actical correlated strongly with Actiwatch (r = 0.820; p < 0.0001), but not with Sleepwatch (0.405; p = 0.0266). SE determined by PSG correlated somewhat strongly with SE estimated from the Sleepwatch and Actiwatch (r = 0.619 and 0.651, respectively), but only weakly with SE estimated from the Actical (r = 0.348; p = 0.0598). The results from this study suggest that a device designed for assessment of physical activity and truncal placement can be used to measure sleep duration as reliably as devices designed for wrist use and sleep wake inference.

The use of holographic interferometry and electron speckle pattern interferometry for diffusion measurement in biochemical and pharmaceutical engineering applications

NASA Astrophysics Data System (ADS)

Axelsson, Anders; Marucci, Mariagrazia

2008-12-01

In this review holographic interferometry and electron speckle pattern interferometry are discussed as efficient techniques for diffusion measurements in biochemical and pharmaceutical applications. Transport phenomena can be studied, quantitatively and qualitatively, in gels, liquids and membranes. Detailed information on these phenomena is required to design effective chromatography bioseparation processes using gel beads or ultrafiltration membranes, and in the design of controlled-release pharmaceuticals using membrane-coated pellets or tablets. The influence of gel concentration, ion strength in the liquid and the size of diffusing protein molecules can easily be studied with good accuracy. When studying membranes, the resistance can be quantified, and it is also possible to discriminate between permeable and semi-permeable membranes. In this review the influence of temperature, natural convection and light deflection on the accuracy of the diffusion measurements is also discussed.

What Is the Efficacy of Teaching Psychotherapy to Psychiatry Residents and Medical Students?

PubMed

Truong, Anh; Wu, Peter; Diez-Barroso, Ramon; Coverdale, John

2015-10-01

Because there are no formal reviews, the authors set out to identify and evaluate studies on teaching psychotherapy to psychiatry residents and medical students. PubMed, Embase, and PsycINFO were searched for papers with outcomes on teaching psychotherapy. Search terms included psychotherapy, teaching, residents, medical students, supportive, psychodynamic, cognitive, behavioral, learning, training, skills, competency, and mentalization. Nine studies were found that met inclusion criteria. There were seven studies of psychiatry residents and two of medical students. Only two of the research designs had comparison groups, and these were both randomized controlled trials, while seven of the other designs were pretest and posttest. Teaching methods, course content, and outcome measures varied widely across studies. Common methodological problems included a lack of control, low numbers of subjects as learners, and a lack of validity of the outcome measures. Only one of the studies was judged to be methodologically rigorous. These findings establish a priority for undertaking additional rigorously designed studies in evaluating the teaching of psychotherapy to psychiatry residents and medical students.

Mapping photopolarimeter spectrometer instrument feasibility study for future planetary flight missions

NASA Technical Reports Server (NTRS)

1990-01-01

Evaluations are summarized directed towards defining optimal instrumentation for performing planetary polarization measurements from a spacecraft platform. An overview of the science rationale for polarimetric measurements is given to point out the importance of such measurements for future studies and exploration of the outer planets. The key instrument features required to perform the needed measurements are discussed and applied to the requirements for the Cassini mission to Saturn. The resultant conceptual design of a spectro-polarimeter photometer for Cassini is described in detail.

Influence of Reduced Mass Flow Rate and Chamber Backpressure on Swirl Injector Fluid Mechanics

NASA Technical Reports Server (NTRS)

Kenny, R Jeremy; Hulka, James R.

2008-01-01

Industry interest in variable-thrust liquid rocket engines places a demand on engine injector technology to operate over a wide range of liquid mass flow rates and chamber backpressures. One injection technology of current interest for variable thrust applications is an injector design with swirled fluids. Current swirl injector design methodologies do not take into account how swirl injector design parameters respond to elevated chamber backpressures at less than design mass flow rates. The current work was created to improve state-of-the-art swirl injector design methods in this area. The specific objective was to study the effects of elevated chamber backpressure and off-design mass flow rates on swirl injector fluid mechanics. Using a backpressure chamber with optical access, water was flowed through a swirl injector at various combinations of chamber backpressure and mass flow rates. The film thickness profile down the swirl injector nozzle section was measured through a transparent nozzle section of the injector. High speed video showed measurable increases in the film thickness profile with application of chamber backpressure and mass flow rates less than design. At prescribed combinations of chamber backpressure and injected mass flow rate, a discrete change in the film thickness profile was observed. Measured injector discharge coefficient values showed different trends with increasing chamber backpressure at low mass flow rates as opposed to near-design mass flow rates. Downstream spray angles showed classic changes in morphology as the mass flow rate was decreased below the design value. Increasing chamber backpressure decreased the spray angle at any injection mass flow rate. Experimental measurements and discussion of these results are reported in this paper.

A Multi-Stage Longitudinal Comparative Design Stage II Evaluation of the Changing Lives Program: The Life Course Interview (RDA-LCI)

ERIC Educational Resources Information Center

Arango, Lisa Lewis; Kurtines, William M.; Montgomery, Marilyn J.; Ritchie, Rachel

2008-01-01

The study reported in this article, a Multi-Stage Longitudinal Comparative Design Stage II evaluation conducted as a planned preliminary efficacy evaluation (psychometric evaluation of measures, short-term controlled outcome studies, etc.) of the Changing Lives Program (CLP), provided evidence for the reliability and validity of the qualitative…

Training Valence, Instrumentality, and Expectancy Scale (T-VIES-it): Factor Structure and Nomological Network in an Italian Sample

ERIC Educational Resources Information Center

Zaniboni, Sara; Fraccaroli, Franco; Truxillo, Donald M.; Bertolino, Marilena; Bauer, Talya N.

2011-01-01

Purpose: The purpose of this study is to validate, in an Italian sample, a multidimensional training motivation measure (T-VIES-it) based on expectancy (VIE) theory, and to examine the nomological network surrounding the construct. Design/methodology/approach: Using a cross-sectional design study, 258 public sector employees in Northeast Italy…

Integrated source and channel encoded digital communication system design study

NASA Technical Reports Server (NTRS)

Huth, G. K.; Trumpis, B. D.; Udalov, S.

1975-01-01

Various aspects of space shuttle communication systems were studied. The following major areas were investigated: burst error correction for shuttle command channels; performance optimization and design considerations for Costas receivers with and without bandpass limiting; experimental techniques for measuring low level spectral components of microwave signals; and potential modulation and coding techniques for the Ku-band return link. Results are presented.

Measuring cardiac waste: the premier cardiac waste measures.

PubMed

Lowe, Timothy J; Partovian, Chohreh; Kroch, Eugene; Martin, John; Bankowitz, Richard

2014-01-01

The authors developed 8 measures of waste associated with cardiac procedures to assist hospitals in comparing their performance with peer facilities. Measure selection was based on review of the research literature, clinical guidelines, and consultation with key stakeholders. Development and validation used the data from 261 hospitals in a split-sample design. Measures were risk adjusted using Premier's CareScience methodologies or mean peer value based on Medicare Severity Diagnosis-Related Group assignment. High variability was found in resource utilization across facilities. Validation of the measures using item-to-total correlations (range = 0.27-0.78), Cronbach α (.88), and Spearman rank correlation (0.92) showed high reliability and discriminatory power. Because of the level of variability observed among hospitals, this study suggests that there is opportunity for facilities to design successful waste reduction programs targeting cardiac-device procedures.

Maintaining evaluation designs in long term community based health promotion programmes: Heartbeat Wales case study.

PubMed Central

Nutbeam, D; Smith, C; Murphy, S; Catford, J

1993-01-01

STUDY OBJECTIVE--To examine the difficulties of developing and maintaining outcome evaluation designs in long term, community based health promotion programmes. DESIGN--Semistructured interviews of health promotion managers. SETTING--Wales and two reference health regions in England. PARTICIPANTS--Nine health promotion managers in Wales and 18 in England. MEASUREMENTS AND MAIN RESULTS--Information on selected heart health promotion activity undertaken or coordinated by health authorities from 1985-90 was collected. The Heartbeat Wales coronary heart disease prevention programme was set up in 1985, and a research and evaluation strategy was established to complement the intervention. A substantial increase in the budget occurred over the period. In the reference health regions in England this initiative was noted and rapidly taken up, thus compromising their use as control areas. CONCLUSION--Information on large scale, community based health promotion programmes can disseminate quickly and interfere with classic intervention/evaluation control designs through contamination. Alternative experimental designs for assessing the effectiveness of long term intervention programmes need to be considered. These should not rely solely on the use of reference populations, but should balance the measurement of outcome with an assessment of the process of change in communities. The development and use of intervention exposure measures together with well structured and comprehensive process evaluation in both the intervention and reference areas is recommended. PMID:8326270

Integrated Measurement of Crew Resource Management and Technical Flying Skills

DOT National Transportation Integrated Search

1993-08-01

This report presents the findings of a study designed with two objectives: to produce a prototype performance : measurement instrument (PMI) that integrates the assessment of Crew Resource Management (CRM) and technical flying : skills and to investi...

Application of ideal pressure distribution in development process of automobile seats.

PubMed

Kilincsoy, U; Wagner, A; Vink, P; Bubb, H

2016-07-19

In designing a car seat the ideal pressure distribution is important as it is the largest contact surface between the human and the car. Because of obstacles hindering a more general application of the ideal pressure distribution in seating design, multidimensional measuring techniques are necessary with extensive user tests. The objective of this study is to apply and integrate the knowledge about the ideal pressure distribution in the seat design process for a car manufacturer in an efficient way. Ideal pressure distribution was combined with pressure measurement, in this case pressure mats. In order to integrate this theoretical knowledge of seating comfort in the seat development process for a car manufacturer a special user interface was defined and developed. The mapping of the measured pressure distribution in real-time and accurately scaled to actual seats during test setups directly lead to design implications for seat design even during the test situation. Detailed analysis of the subject's feedback was correlated with objective measurements of the subject's pressure distribution in real time. Therefore existing seating characteristics were taken into account as well. A user interface can incorporate theoretical and validated 'state of the art' models of comfort. Consequently, this information can reduce extensive testing and lead to more detailed results in a shorter time period.

An Educational Intervention to Enhance Nurse Leaders' Perceptions of Patient Safety Culture

PubMed Central

Ginsburg, Liane; Norton, Peter G; Casebeer, Ann; Lewis, Steven

2005-01-01

Objective To design a training intervention and then test its effect on nurse leaders' perceptions of patient safety culture. Study Setting Three hundred and fifty-six nurses in clinical leadership roles (nurse managers and educators/CNSs) in two Canadian multi-site teaching hospitals (study and control). Study Design A prospective evaluation of a patient safety training intervention using a quasi-experimental untreated control group design with pretest and posttest. Nurses in clinical leadership roles in the study group were invited to participate in two patient safety workshops over a 6-month period. Individuals in the study and control groups completed surveys measuring patient safety culture and leadership for improvement prior to training and 4 months following the second workshop. Extraction Methods Individual nurse clinical leaders were the unit of analysis. Exploratory factor analysis of the safety culture items was conducted; repeated-measures analysis of variance and paired t-tests were used to evaluate the effect of the training intervention on perceived safety culture (three factors). Hierarchical regression analyses looked at the influence of demographics, leadership for improvement, and the training intervention on nurse leaders' perceptions of safety culture. Principal Findings A statistically significant improvement in one of three safety culture measures was shown for the study group (p<.001) and a significant decline was seen on one of the safety culture measures for the control group (p<.05). Leadership support for improvement was found to explain significant amounts of variance in all three patient safety culture measures; workshop attendance explained significant amounts of variance in one of the three safety culture measures. The total R2 for the three full hierarchical regression models ranged from 0.338 and 0.554. Conclusions Sensitively delivered training initiatives for nurse leaders can help to foster a safety culture. Organizational leadership support for improvement is, however, also critical for fostering a culture of safety. Together, training interventions and leadership support may have the most significant impact on patient safety culture. PMID:16033489

[The case-case-time-control study design].

PubMed

Wang, Jing; Zhuo, Lin; Zhan, Siyan

2014-12-01

Although the 'self-matched case-only studies' (such as the case-cross-over or self-controlled case-series method) can control the time-invariant confounders (measured or unmeasured) through design of the study, however, they can not control those confounders that vary with time. A bidirectional case-crossover design can be used to adjust the exposure-time trends. In the areas of pharmaco-epidemiology, illness often influence the future use of medications, making a bidirectional study design problematic. Suissa's case-time-control design combines the case-crossover and the case-control design which could adjust for exposure-trend bias, but the control group may reintroduce selection bias, if the matching does not go well. We propose a "case-case-time-control" design which is an extension of the case-time-control design. However, rather than using a sample of external controls, we choose those future cases as controls for current cases to counter the bias that arising from temporal trends caused by exposure to the target of interest. In the end of this article we will discuss the strength and limitations of this design based on an applied example.

Assessment of vascular and endothelial dysfunction in nutritional studies.

PubMed

Ray, S; Miglio, C; Eden, T; Del Rio, D

2014-09-01

Vascular and endothelial dysfunction (VED) is emerging as a potential set of early markers of cardiovascular disease risk and tests for its measurement have been widely used in clinical research. The aim of this viewpoint is to describe and discuss the current usage of these measures in well-designed nutritional trials, using the potential relationship between fruit juice intake and VED as example. A search was conducted using the NHS evidence portal including studies published in English between January 1980 and October 2013. Only 10 suitable studies were selected, which investigated the effect of fruit juice intake on VED, among which 4 interventions used flow-mediated dilatation, 2 arterial stiffness, 2 a combination of arterial stiffness and flow-mediated dilatation, 2 carotid intimal media thickness and 1 iontophoresis with laser Doppler. Despite minimal effects reported on classical CVD markers, such as lipids, 8 out of the 10 identified studies reported an effect on endothelial function following juice consumption, indicating that VED tests can be effectively used in human dietary interventions to identify relationships between bioactive compounds from fruit and CVD risk. However, paucity of available data, scarcity of compound bioavailability and metabolism information, strong heterogeneity among experimental methodologies and a number of limitations to study designs, still limit the interpretation of the results obtained through these measures. Future, well-designed studies with greater attention to consider use of VED measures are needed to strengthen the utility of VED tests in nutrition research such as those investigating the impact of polyphenol-rich juices and CVD risk. Copyright © 2014 Elsevier B.V. All rights reserved.

Facilitating mental health help-seeking by young adults with a dedicated online program: a feasibility study of Link

PubMed Central

Kauer, Sylvia D; Buhagiar, Kerrie; Blake, Victoria; Cotton, Sue; Sanci, Lena

2017-01-01

Objective To explore the feasibility of a dedicated online youth mental health help-seeking intervention and to evaluate using a randomised controlled trial (RCT) study design in order to identify any modifications needed before commencement of the full-scale RCT. Design A pilot RCT with 1:1 randomisation to either the intervention or comparison arm. Setting An online study conducted Australia-wide. Participants 18–25 year olds living in Australia were recruited via social media. Intervention Link is a dedicated online mental health help-seeking navigation tool that matches user’s mental health issues, severity and service-type preferences (online, phone and face-to-face) with appropriate youth-friendly services. The comparison arm was usual help-seeking strategies with a link to Google.com. Main outcome measures The primary outcome was the number of acceptability and feasibility criteria successfully met. Intervention and study design acceptability and feasibility were assessed by nine criteria. Secondary outcomes, via online surveys (at baseline, 1 week and 1 month) measured service use, help-seeking intentions, psychological distress, barriers to help-seeking, attitudes towards mental health help-seeking, mental health literacy, satisfaction and trust. Results Fifty-one participants were randomised (intervention: n=24; comparison: n=27). Three out of four of the intervention and two out of five of the study design criteria were met. Unmet criteria could be addressed by modifications to the study design. Qualitative analysis demonstrated that Link was useful to participants and may have increased their positive experiences towards help-seeking. There were no observable differences between arms in any outcome measures and no harms were detected. Conclusion Generally, the Link intervention and study design were acceptable and feasible with modifications suggested for the four out of nine unmet criteria. The main trial will hence have shorter surveys and a simpler recruitment process, use positive affect as the primary outcome and will not link to Google.com for the comparison arm. Trial registration number Australian New Zealand Clinical Trials Registry, ACTRN12614000386639. PMID:28694345

Design and experimental study of a novel giant magnetostrictive actuator

NASA Astrophysics Data System (ADS)

Xue, Guangming; Zhang, Peilin; He, Zhongbo; Li, Dongwei; Huang, Yingjie; Xie, Wenqiang

2016-12-01

Giant magnetostrictive actuator has been widely used in precise driving occasions for its excellent performance. However, in driving a switching valve, especially the ball-valve in an electronic controlled injector, the actuator can't exhibit its good performance for limits in output displacement and responding speed. A novel giant magnetostrictive actuator, which can reach its maximum displacement for being exerted with no bias magnetic field, is designed in this paper. Simultaneously, elongating of the giant magetostrictive material is converted to shortening of the actuator's axial dimension with the help of an output rod in "T" type. Furthermore, to save responding time, the driving voltage with high opening voltage while low holding voltage is designed. Responding time and output displacement are studied experimentally with the help of a measuring system. From measured results, designed driving voltage can improve the responding speed of actuator displacement quite effectively. And, giant magnetostrictive actuator can output various steady-state displacements to reach more driving effects.

Discriminant Analysis Between Four Different Self Measures and Sex-Role Identity with Junior Year College Students.

ERIC Educational Resources Information Center

Wallace, Gaylen R.; Goodwin-Adam, Sharon

A review of the literature concerning the relationship between sex role and self measure identity includes a discussion of issues confronted in measurement. The methodology and analyses of data for the study are explained. The research was designed to determine which self referent measure most effectively discriminates among sex role identities.…

Arterial compliance probe for local blood pulse wave velocity measurement.

PubMed

Nabeel, P M; Joseph, Jayaraj; Sivaprakasam, Mohanasankar

2015-08-01

Arterial compliance and vessel wall dynamics are significant in vascular diagnosis. We present the design of arterial compliance probes for measurement of local pulse wave velocity (PWV). Two designs of compliance probe are discussed, viz (a) a magnetic plethysmograph (MPG) based probe, and (b) a photoplethysmograph (PPG) based probe. The ability of the local PWV probes to consistently capture carotid blood pulse waves is verified by in-vivo trials on few volunteers. The probes could reliably perform repeatable measurements of local PWV from carotid artery along small artery sections less than 20 mm. Further, correlation between the measured values of local PWV using probes and various measures of blood pressure (BP) was also investigated. The study indicates that such arterial compliance probes have strong potential in cuff less BP monitoring.

First data with the Hybrid Array of Gamma Ray Detector (HAGRiD)

NASA Astrophysics Data System (ADS)

Smith, K.; Baugher, T.; Burcher, S.; Carter, A. B.; Cizewski, J. A.; Chipps, K. A.; Febbraro, M.; Grzywacz, R.; Jones, K. L.; Munoz, S.; Pain, S. D.; Paulauskas, S. V.; Ratkiewicz, A.; Schmitt, K. T.; Thornsberry, C.; Toomey, R.; Walter, D.; Willoughby, H.

2018-01-01

The structure of nuclei provides insight into astrophysical reaction rates that are difficult to measure directly. These studies are often performed with transfer reactions and β-decay measurements. These experiments benefit from particle-γ coincidence measurements which provide information beyond that of particle detection alone. The Hybrid Array of Gamma Ray Detectors (HAGRiD) of LaBr3(Ce) scintillators has been designed with this purpose in mind. The design of the array permits it to be coupled with particle detector systems, such as the Oak Ridge Rutgers University Barrel Array (ORRUBA) of silicon detectors and the Versatile Array of Neutron Detectors at Low Energy (VANDLE). It is also designed to operate with the Jet Experiments in Nuclear Structure and Astrophysics (JENSA) advanced target system. HAGRiD's design avoids compromising the charged-particle angular resolution due to compact geometries which are often used to increase the γ efficiency in other systems. First experiments with HAGRiD coupled to VANDLE as well as ORRUBA and JENSA are discussed.

Solar array module plasma interactions experiment (SAMPIE) - Science and technology objectives

NASA Technical Reports Server (NTRS)

Hillard, G. B.; Ferguson, Dale C.

1993-01-01

The solar array module plasma interactions experiment (SAMPIE) is an approved NASA flight experiment manifested for Shuttle deployment in early 1994. The SAMPIE experiment is designed to investigate the interaction of high voltage space power systems with ionospheric plasma. To study the behavior of solar cells, a number of solar cell coupons (representing design technologies of current interest) will be biased to high voltages to measure both arcing and current collection. Various theories of arc suppression will be tested by including several specially modified cell coupons. Finally, SAMPIE will include experiments to study the basic nature of arcing and current collection. This paper describes the rationale for a space flight experiment, the measurements to be made, and the significance of the expected results. A future paper will present a detailed discussion of the engineering design.

Can psychotherapists function as their own controls? Meta-analysis of the crossed therapist design in comparative psychotherapy trials.

PubMed

Falkenström, Fredrik; Markowitz, John C; Jonker, Hanske; Philips, Björn; Holmqvist, Rolf

2013-05-01

Clinical trials sometimes have the same therapists deliver more than 1 psychotherapy, ostensibly to control for therapist effects. This "crossed therapist" design makes controlling for therapist allegiance imperative, as therapists may prefer one treatment they deliver to the other(s). Research has established a strong relationship between principal investigators' allegiances and treatment outcome. Study therapists' allegiances probably also influence outcome, yet this moderating factor on outcome has never been studied. English language abstracts in PsycINFO and MEDLINE from January 1985 to December 2011 were searched for keywords psychotherapy and randomized trial. The search yielded 990 abstracts that were searched manually. Trials using the same therapists in more than 1 condition were included. Thirty-nine studies fulfilled inclusion criteria. Meta-regression analyses assessed the influence of researchers' allegiance on treatment outcome, testing the hypothesis that studies poorly controlling for therapist allegiance would show stronger influence of researcher allegiance on outcome. A single-item measure assessed researchers' reported attempts to control for therapist allegiance. Only 1 of 39 studies (3%) measured therapist treatment allegiance. Another 5 (13%) mentioned controlling for, without formally assessing, therapist allegiance. Most publications (67%) did not even mention therapist allegiance. In studies not controlling for therapist allegiance, researcher allegiance strongly influenced outcome, whereas studies reporting control for therapist allegiance showed no differential researcher allegiance. Researchers with cognitive-behavioral therapy allegiance described controlling for therapist allegiance less frequently than other researchers. The crossed therapist design is subject to bias due to differential psychotherapist allegiance. Worrisome results suggest that researchers strongly allied to a treatment may ignore therapist allegiance, potentially skewing outcomes. All clinical trials, and especially crossed therapist designs, should measure psychotherapist allegiance to evaluate this possible bias. © Copyright 2013 Physicians Postgraduate Press, Inc.

Research on precise pneumatic-electric displacement sensor with large measurement range

NASA Astrophysics Data System (ADS)

Yin, Zhehao; Yuan, Yibao; Liu, Baoshuai

2017-10-01

This research mainly focuses on precise pneumatic-electric displacement sensor which has large measurement range. Under the high precision, measurement range can be expanded so that the need of high precision as well as large range can be satisfied in the field of machining inspection technology. This research was started by the analysis of pneumatic-measuring theory. Then, an gas circuit measuring system which is based on differential pressure was designed. This designed system can reach two aims: Firstly, to convert displacement signal into gas signal; Secondly, to reduce the measurement error which caused by pressure and environmental turbulence. Furthermore, in consideration of the high requirement for linearity, sensitivity and stability, the project studied the pneumatic-electric transducer which puts the SCX series pressure sensor as a key part. The main purpose of this pneumatic-electric transducer is to convert gas signal to suitable electrical signal. Lastly, a broken line subsection linearization circuit was designed, which can nonlinear correct the output characteristic curve so as to enlarge the linear measurement range. The final result could be briefly described like this: under the condition that measuring error is less than 1μm, measurement range could be extended to approximately 200μm which is much higher than the measurement range of traditional pneumatic measuring instrument. Meanwhile, it can reach higher exchangeability and stability in order to become more suitable to engineering application.

Clinical utility of measures of breathlessness.

PubMed

Cullen, Deborah L; Rodak, Bernadette

2002-09-01

The clinical utility of measures of dyspnea has been debated in the health care community. Although breathlessness can be evaluated with various instruments, the most effective dyspnea measurement tool for patients with chronic lung disease or for measuring treatment effectiveness remains uncertain. Understanding the evidence for the validity and reliability of these instruments may provide a basis for appropriate clinical application. Evaluate instruments designed to measure breathlessness, either as single-symptom or multidimensional instruments, based on psychometrics foundations such as validity, reliability, and discriminative and evaluative properties. Classification of each dyspnea measurement instrument will recommend clinical application in terms of exercise, benchmarking patients, activities of daily living, patient outcomes, clinical trials, and responsiveness to treatment. Eleven dyspnea measurement instruments were selected. Each instrument was assessed as discriminative or evaluative and then analyzed as to its psychometric properties and purpose of design. Descriptive data from all studies were described according to their primary patient application (ie, chronic obstructive pulmonary disease, asthma, or other patient populations). The Borg Scale and the Visual Analogue Scale are applicable to exertion and thus can be applied to any cardiopulmonary patient to determine dyspnea. All other measures were determined appropriate for chronic obstructive pulmonary disease, whereas the Shortness of Breath Questionnaire can be applied to cystic fibrosis and lung transplant patients. The most appropriate utility for all instruments was measuring the effects on activities of daily living and for benchmarking patient progress. Instruments that quantify function and health-related quality of life have great utility for documenting outcomes but may be limited as to documenting treatment responsiveness in terms of clinically important changes. The dyspnea measurement instruments we studied meet important standards of validity and reliability. Discriminative measures have limited clinical utility and, when used for populations or conditions for which they are not designed or validated, the data collected may not be clinically relevant. Evaluative measures have greater clinical utility and can be applied for outcome purposes. Measures should be applied to the populations and conditions for which they were designed. The relationship between clinical therapies and the measurement of dyspnea as an outcome can develop as respiratory therapists become more comfortable with implementing dyspnea measurement instruments and use the data to improve patient treatment. Dyspnea evaluation should be considered for all clinical practice guidelines and care pathways.

Evaluating the quality of a cell counting measurement process via a dilution series experimental design.

PubMed

Sarkar, Sumona; Lund, Steven P; Vyzasatya, Ravi; Vanguri, Padmavathy; Elliott, John T; Plant, Anne L; Lin-Gibson, Sheng

2017-12-01

Cell counting measurements are critical in the research, development and manufacturing of cell-based products, yet determining cell quantity with accuracy and precision remains a challenge. Validating and evaluating a cell counting measurement process can be difficult because of the lack of appropriate reference material. Here we describe an experimental design and statistical analysis approach to evaluate the quality of a cell counting measurement process in the absence of appropriate reference materials or reference methods. The experimental design is based on a dilution series study with replicate samples and observations as well as measurement process controls. The statistical analysis evaluates the precision and proportionality of the cell counting measurement process and can be used to compare the quality of two or more counting methods. As an illustration of this approach, cell counting measurement processes (automated and manual methods) were compared for a human mesenchymal stromal cell (hMSC) preparation. For the hMSC preparation investigated, results indicated that the automated method performed better than the manual counting methods in terms of precision and proportionality. By conducting well controlled dilution series experimental designs coupled with appropriate statistical analysis, quantitative indicators of repeatability and proportionality can be calculated to provide an assessment of cell counting measurement quality. This approach does not rely on the use of a reference material or comparison to "gold standard" methods known to have limited assurance of accuracy and precision. The approach presented here may help the selection, optimization, and/or validation of a cell counting measurement process. Published by Elsevier Inc.

Development and Testing of a Friction-Based Post-Installable Sensor for Subsea Fiber-Optic Monitoring System

NASA Technical Reports Server (NTRS)

Bentley, Nicole L.; Brower, David V.; Le, Suy Q.; Seaman, Calvin H.; Tang, Henry H.

2017-01-01

This paper presents the design and development of a friction-based coupling device for a fiber-optic monitoring system that can be deployed on existing subsea structures. This paper provides a summary of the design concept, prototype development, prototype performance testing, and design refinements of the device. The results of the laboratory testing of the first prototype performed at the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) are included in this paper. Limitations of the initial design were identified and future design improvements were proposed. These new features will enhance the coupling of the device and improve the monitoring system measurement capabilities. A major challenge of a post-installed instrumentation monitoring system is to ensure adequate coupling between the instruments and the structure of interest for reliable measurements. Friction-based coupling devices have the potential to overcome coupling limitations caused by marine growth and soil contamination on subsea structures, flowlines or risers. The work described in this paper investigates the design of a friction-based coupling device (friction clamp), which is applicable for pipelines and structures that are suspended in the water column and those that are resting on the seabed. The monitoring elements consist of fiber-optic sensors that are bonded to a metal clamshell with a high-friction coating. The friction clamp has a single hinge design to facilitate the operation of the clamp and dual rows of opposing fasteners to distribute the clamping force on the structure. The friction clamp can be installed by divers in shallow depths or by remotely operated vehicles in deep-water applications. NASA-JSC was involved in the selection and testing of the friction coating, and in the design and testing of the prototype clamp device. Four-inch diameter and eight-inch diameter sub-scale friction clamp prototypes were built and tested to evaluate the strain measuring capabilities of the design under different loading scenarios. The testing revealed some limitations of the initial design concept, and subsequent refinements were explored to improve the measurement performance of the system. This study was part of a collaboration between NASA-JSC and Astro Technology, Inc. within a study called Clear Gulf. The primary objective of the Clear Gulf study is to develop advanced instrumentation technologies that will improve operational safety and reduce the risk of hydrocarbon spillage. NASA provided unique insights, expansive test facilities, and technical expertise to advance these technologies that would benefit the environment, the public, and commercial industries.

Development and Testing of a Friction-Based Post-Installable Sensor for Subsea Fiber-Optic Monitoring Systems

NASA Technical Reports Server (NTRS)

Bentley, Nicole; Brower, David; Le, Suy Q.; Seaman, Calvin; Tang, Henry

2017-01-01

This paper presents the design and development of a friction-based coupling device for a fiber-optic monitoring system that can be deployed on existing subsea structures. This paper provides a summary of the design concept, prototype development, prototype performance testing, and design refinements of the device. The results of the laboratory testing of the first prototype performed at the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) are included in this paper. Limitations of the initial design were identified and future design improvements were proposed. These new features will enhance the coupling of the device and improve the monitoring system measurement capabilities. A major challenge of a post-installed instrumentation monitoring system is to ensure adequate coupling between the instruments and the structure of interest for reliable measurements. Friction-based coupling devices have the potential to overcome coupling limitations caused by marine growth and soil contamination on subsea structures, flowlines or risers. The work described in this paper investigates the design of a friction-based coupling device (friction clamp), which is applicable for pipelines and structures that are suspended in the water column and those that are resting on the seabed. The monitoring elements consist of fiber-optic sensors that are bonded to a metal clamshell with a high-friction coating. The friction clamp has a single hinge design to facilitate the operation of the clamp and dual rows of opposing fasteners to distribute the clamping force on the structure. The friction clamp can be installed by divers in shallow depths or by remotely operated vehicles in deep-water applications. NASA-JSC was involved in the selection and testing of the friction coating, and in the design and testing of the prototype clamp device. Four-inch diameter and eight-inch diameter sub-scale friction clamp prototypes were built and tested to evaluate the strain measuring capabilities of the design under different loading scenarios. The testing revealed some limitations of the initial design concept, and subsequent refinements were explored to improve the measurement performance of the system. This study was part of a collaboration between NASA-JSC and Astro Technology, Inc. within a study called Clear Gulf. The primary objective of the Clear Gulf study is to develop advanced instrumentation technologies that will improve operational safety and reduce the risk of hydrocarbon spillage. NASA provided unique insights, expansive test facilities, and technical expertise to advance these technologies that would benefit the environment, the public, and commercial industries.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Britton, C.L.; Jagadish, U.; Bryan, W.L.

An Integrated Circuit (IC) readout chip with four channels arranged so as to receive input charge from the corners of the chip was designed for use with 5- to 7-mm pixel detectors. This Application Specific IC (ASIC) can be used for cold neutron imaging, for study of structural order in materials using cold neutron scattering or for particle physics experiments. The ASIC is fabricated in a 0.5-{micro}m n-well AMI process. The design of the ASIC and the test measurements made is reported. Noise measurements are also reported.

A Novel Multimode Waveguide Coupler for Accurate Power Measurement of Traveling Wave Tube Harmonic Frequencies

NASA Technical Reports Server (NTRS)

Wintucky, Edwin G.; Simons, Rainee N.

2014-01-01

This paper presents the design, fabrication and test results for a novel waveguide multimode directional coupler (MDC). The coupler fabricated from two dissimilar waveguides is capable of isolating the power at the second harmonic frequency from the fundamental power at the output port of a traveling-wave tube (TWT). In addition to accurate power measurements at harmonic frequencies, a potential application of the MDC is in the design of a beacon source for atmospheric propagation studies at millimeter-wave frequencies.

Developing future plant experiments for spaceflight

NASA Technical Reports Server (NTRS)

Dreschel, T. W.; Brown, C. S.; Hinkle, C. R.; Sager, J. C.; Knott, W. M.

1990-01-01

Experiments are described which were designed to support the constructing and using clinostats for studies of microgravity effects and for measuring photosynthesis and respiration in plants in clinostat experiments. Particular attention is given to the development and testing a clinostat for rotating the Space Shuttle Mid-Deck Locker Plant Growth Unit (PGU), a sealed chamber for plan growth and gas exchange measurements on a clinostat, and a porous tube plant nutrient delivery system for the PGU. Design diagrams of these items are presented together with the results of tests.

Optimal design of microtube recuperators for an indirect supercritical carbon dioxide recompression closed Brayton cycle

DOE PAGES

Jiang, Yuan; Liese, Eric; Zitney, Stephen E.; ...

2018-02-25

This paper presents a baseline design and optimization approach developed in Aspen Custom Modeler (ACM) for microtube shell-and-tube exchangers (MSTEs) used for high- and low-temperature recuperation in a 10 MWe indirect supercritical carbon dioxide (sCO 2) recompression closed Brayton cycle (RCBC). The MSTE-type recuperators are designed using one-dimensional models with thermal-hydraulic correlations appropriate for sCO 2 and properties models that capture considerable nonlinear changes in CO 2 properties near the critical and pseudo-critical points. Using the successive quadratic programming (SQP) algorithm in ACM, optimal recuperator designs are obtained for either custom or industry-standard microtubes considering constraints based on current advancedmore » manufacturing techniques. The three decision variables are the number of tubes, tube pitch-to-diameter ratio, and tube diameter. Five different objective functions based on different key design measures are considered: minimization of total heat transfer area, heat exchanger volume, metal weight, thermal residence time, and maximization of compactness. Sensitivities studies indicate the constraint on the maximum number of tubes per shell does affect the number of parallel heat exchanger trains but not the tube selection, total number of tubes, tube length and other key design measures in the final optimal design when considering industry-standard tubes. In this study, the optimally designed high- and low-temperature recuperators have 47,000 3/32 inch tubes and 63,000 1/16 inch tubes, respectively. In addition, sensitivities to the design temperature approach and maximum allowable pressure drop are studied, since these specifications significantly impact the optimal design of the recuperators as well as the thermal efficiency and the economic performance of the entire sCO 2 Brayton cycle.« less

Optimal design of microtube recuperators for an indirect supercritical carbon dioxide recompression closed Brayton cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Yuan; Liese, Eric; Zitney, Stephen E.

This paper presents a baseline design and optimization approach developed in Aspen Custom Modeler (ACM) for microtube shell-and-tube exchangers (MSTEs) used for high- and low-temperature recuperation in a 10 MWe indirect supercritical carbon dioxide (sCO 2) recompression closed Brayton cycle (RCBC). The MSTE-type recuperators are designed using one-dimensional models with thermal-hydraulic correlations appropriate for sCO 2 and properties models that capture considerable nonlinear changes in CO 2 properties near the critical and pseudo-critical points. Using the successive quadratic programming (SQP) algorithm in ACM, optimal recuperator designs are obtained for either custom or industry-standard microtubes considering constraints based on current advancedmore » manufacturing techniques. The three decision variables are the number of tubes, tube pitch-to-diameter ratio, and tube diameter. Five different objective functions based on different key design measures are considered: minimization of total heat transfer area, heat exchanger volume, metal weight, thermal residence time, and maximization of compactness. Sensitivities studies indicate the constraint on the maximum number of tubes per shell does affect the number of parallel heat exchanger trains but not the tube selection, total number of tubes, tube length and other key design measures in the final optimal design when considering industry-standard tubes. In this study, the optimally designed high- and low-temperature recuperators have 47,000 3/32 inch tubes and 63,000 1/16 inch tubes, respectively. In addition, sensitivities to the design temperature approach and maximum allowable pressure drop are studied, since these specifications significantly impact the optimal design of the recuperators as well as the thermal efficiency and the economic performance of the entire sCO 2 Brayton cycle.« less

Pure study and experimental application of laser measurement for students in independent colleges

NASA Astrophysics Data System (ADS)

Zhang, Wanyi; Liu, Zhe

2017-08-01

The cultivation of independent college students is the development of applied talents and the strength of students' innovative ability. This requires teachers to make better use of the resources of the school, to develop students' ability with greatest possible and to encourage students to learn independently and personality development. We can carry out multi-discipline curriculum design practice after the study of related disciplines in order to make students have a more in-depth understanding and learning of the professional courses. In this paper, we will research on curriculum design based on the combination of Laser Measurement Technology and Digital Image Processing.

78 FR 17680 - Information Collection Request; Chemical Facility Anti-Terrorism Standards Personnel Surety Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-22

... visitors with access to restricted areas or critical assets, including, (i) Measures designed to verify and validate identity; (ii) Measures designed to check criminal history; (iii) Measures designed to verify and validate legal authorization to work; and (iv) Measures designed to identify people with terrorist ties...

Reliability, Sensitivity to Measuring Change, and Construct Validity of a Measure of Counselor Adaptability.

ERIC Educational Resources Information Center

Gabbard, Clinton E.; And Others

1986-01-01

Adaptive Counseling and Therapy (ACT) is an integrative, metatheoretical model for selecting an appropriate therapeutic style based on the task-relevant development maturity of the client. The Counselor Behavior Analysis (CBA) Scale measures the central explanatory construct of ACT theory: counselor adaptability. Three studies designed to assess…

Measuring the Quality of Inclusive Practices: Findings from the Inclusive Classroom Profile Pilot

ERIC Educational Resources Information Center

Soukakou, Elena P.; Winton, Pam J.; West, Tracey A.; Sideris, John H.; Rucker, Lia M.

2014-01-01

The purpose of this study was to test the reliability and validity of the Inclusive Classroom Profile (ICP), an observation measure designed to assess the quality of classroom practices in inclusive preschool programs. The measure was field tested in 51 inclusive classrooms. Results confirmed and extended previous research findings, providing…

Design and validation of a wind tunnel system for odour sampling on liquid area sources.

PubMed

Capelli, L; Sironi, S; Del Rosso, R; Céntola, P

2009-01-01

The aim of this study is to describe the methods adopted for the design and the experimental validation of a wind tunnel, a sampling system suitable for the collection of gaseous samples on passive area sources, which allows to simulate wind action on the surface to be monitored. The first step of the work was the study of the air velocity profiles. The second step of the work consisted in the validation of the sampling system. For this purpose, the odour concentration of some air samples collected by means of the wind tunnel was measured by dynamic olfactometry. The results of the air velocity measurements show that the wind tunnel design features enabled the achievement of a uniform and homogeneous air flow through the hood. Moreover, the laboratory tests showed a very good correspondence between the odour concentration values measured at the wind tunnel outlet and the odour concentration values predicted by the application of a specific volatilization model, based on the Prandtl boundary layer theory. The agreement between experimental and theoretical trends demonstrate that the studied wind tunnel represents a suitable sampling system for the simulation of specific odour emission rates from liquid area sources without outward flow.

A comparison of calculated and measured rheological properties of crystallising lavas in the field and in the laboratory

NASA Technical Reports Server (NTRS)

Pinkerton, Harry; Norton, Gill

1993-01-01

Models of most magmatic processes, including realistic models of planetary lava flows require accurate data on the rheological properties of magma. Previous studies suggest that field and laboratory rheological properties of Hawaiian lavas can be calculated from their physico-chemical properties using a non-Newtonian rheology model. The present study uses new measurements of the rheological properties of crystallizing lavas to show that this is also true for lavas from Mount Etna. Rheological measurements on quenched Etna basalts were made in a specially designed furnace using a Haake Rotovisco viscometer attached to a spindle which has been designed to eliminate slippage at the melt-spindle interface. Using this spindle, we have made measurements at lower temperatures than other workers in this field. From these measurements, Mount Etna lavas are Newtonian at temperatures above 1120 C and they are thixotropic pseudoplastic fluids with a yield strength at lower temperatures. The close agreement between calculated and measured rheology over the temperature range 1084 - 1125 C support the use of the non-Newtonian rheology model in future modeling of planetary lava flows.

Design considerations for case series models with exposure onset measurement error.

PubMed

Mohammed, Sandra M; Dalrymple, Lorien S; Sentürk, Damla; Nguyen, Danh V

2013-02-28

The case series model allows for estimation of the relative incidence of events, such as cardiovascular events, within a pre-specified time window after an exposure, such as an infection. The method requires only cases (individuals with events) and controls for all fixed/time-invariant confounders. The measurement error case series model extends the original case series model to handle imperfect data, where the timing of an infection (exposure) is not known precisely. In this work, we propose a method for power/sample size determination for the measurement error case series model. Extensive simulation studies are used to assess the accuracy of the proposed sample size formulas. We also examine the magnitude of the relative loss of power due to exposure onset measurement error, compared with the ideal situation where the time of exposure is measured precisely. To facilitate the design of case series studies, we provide publicly available web-based tools for determining power/sample size for both the measurement error case series model as well as the standard case series model. Copyright © 2012 John Wiley & Sons, Ltd.

Consistency between cross-sectional and longitudinal SNP: blood lipid associations.

PubMed

Costanza, Michael C; Beer-Borst, Sigrid; James, Richard W; Gaspoz, Jean-Michel; Morabia, Alfredo

2012-02-01

Various studies have linked different genetic single nucleotide polymorphisms (SNPs) to different blood lipids (BL), but whether these "connections" were identified using cross-sectional or longitudinal (i.e., changes over time) designs has received little attention. Cross-sectional and longitudinal assessments of BL [total, high-, low-density lipoprotein cholesterol (TC, HDL, LDL), triglycerides (TG)] and non-genetic factors (body mass index, smoking, alcohol intake) were measured for 2,002 Geneva, Switzerland, adults during 1999-2008 (two measurements, median 6 years apart), and 20 SNPs in 13 BL metabolism-related genes. Fixed and mixed effects repeated measures linear regression models, respectively, were employed to identify cross-sectional and longitudinal SNP:BL associations among the 1,516 (76%) study participants who reported not being treated for hypercholesterolemia at either measurement time. One-third more (12 vs. 9) longitudinal than cross-sectional associations were found [Bonferroni-adjusted two-tailed p < 0.00125 (=0.05/2)/20) for each of the four ensembles of 20 SNP:individual BL associations tested under the two study designs]. There was moderate consistency between the cross-sectional and longitudinal findings, with eight SNP:BL associations consistently identified across both study designs: [APOE.2 and APOE.4 (rs7412 and rs429358)]:TC; HL/LIPC (rs2070895):HDL; [APOB (rs1367117), APOE.2 and APOE.4 (rs7412 and rs429358)]:LDL; [APOA5 (rs2072560) and APOC III (rs5128)]:TG. The results suggest that cross-sectional studies, which include most genome-wide association studies (GWAS), can assess the large majority of SNP:BL associations. In the present analysis, which was much less powered than a GWAS, the cross-sectional study was around 2/3 (67%) as efficient as the longitudinal study.

Automobile ride quality experiments correlated to iso-weighted criteria

NASA Technical Reports Server (NTRS)

Healey, A. J.; Young, R. K.; Smith, C. C.

1975-01-01

As part of an overall study to evaluate the usefulness of ride quality criteria for the design of improved ground transportation systems an experiment was conducted involving subjective and objective measurement of ride vibrations found in an automobile riding over roadways of various roughness. Correlation of the results led to some very significant relationships between passenger rating and ride accelerations. The latter were collapsed using a frequency-weighted root mean square measure of the random vibration. The results suggest the form of a design criterion giving the relationship between ride vibration and acceptable automobile ride quality. Further the ride criterion is expressed in terms that relate to rides with which most people are familiar. The design of the experiment, the ride vibration data acquisition, the concept of frequency weighting and the correlations found between subjective and objective measurements are presented.

The Effects of Q-Matrix Design on Classification Accuracy in the Log-Linear Cognitive Diagnosis Model.

PubMed

Madison, Matthew J; Bradshaw, Laine P

2015-06-01

Diagnostic classification models are psychometric models that aim to classify examinees according to their mastery or non-mastery of specified latent characteristics. These models are well-suited for providing diagnostic feedback on educational assessments because of their practical efficiency and increased reliability when compared with other multidimensional measurement models. A priori specifications of which latent characteristics or attributes are measured by each item are a core element of the diagnostic assessment design. This item-attribute alignment, expressed in a Q-matrix, precedes and supports any inference resulting from the application of the diagnostic classification model. This study investigates the effects of Q-matrix design on classification accuracy for the log-linear cognitive diagnosis model. Results indicate that classification accuracy, reliability, and convergence rates improve when the Q-matrix contains isolated information from each measured attribute.