Science.gov

Sample records for medium sized enterprises

  1. Promoting Learning in Small and Medium-Sized Enterprises.

    ERIC Educational Resources Information Center

    Hughes, Maria; Gray, Sue

    1998-01-01

    In 1996, small and medium-sized enterprises constituted 99% of all businesses in the United Kingdom in all but the electricity, gas, and water supply sector, providing 46% of nongovernment employment. SMEs' concern with day-to-day demands leaves them with limited time and resources to consider their training needs. Although providing support and…

  2. Workplace Health Promotion within Small and Medium-Sized Enterprises

    ERIC Educational Resources Information Center

    Moore, Ann; Parahoo, Kader; Fleming, Paul

    2010-01-01

    Purpose: The purpose of this study is to explore managers' understanding of workplace health promotion (WHP) and experiences of WHP activity within small and medium-sized enterprises (SMEs) in a Health and Social Care Trust area of Northern Ireland. The paper aims to focus on engagement with activities within the context of prevention of…

  3. Design and implementation of web server soft load balancing in small and medium-sized enterprise

    NASA Astrophysics Data System (ADS)

    Yan, Liu

    2011-12-01

    With the expansion of business scale, small and medium-sized enterprises began to use information platform to improve their management and competition ability, the server becomes the core factor which restricts the enterprise's infomationization construction. This paper puts forward a suitable design scheme for small and medium-sized enterprise web server soft load balancing, and proved it effective through experiment.

  4. Bank Size and Small- and Medium-sized Enterprise (SME) Lending: Evidence from China

    PubMed Central

    SHEN, YAN; SHEN, MINGGAO; XU, ZHONG; BAI, YING

    2014-01-01

    Summary Using panel data collected in 2005, we evaluate how bank size, discretion over credit, incentive schemes, competition, and the institutional environment affect lending to small- and medium-sized enterprises in China. We deal with the endogeneity problem using instrumental variables, and a reduced-form approach is also applied to allow for weak instruments in estimation. We find that total bank asset is an insignificant factor for banks’ decision on small- and medium-enterprise (SME) lending, but more local lending authority, more competition, carefully designed incentive schemes, and stronger law enforcement encourage commercial banks to lend to SMEs. PMID:26052179

  5. Salary Management System for Small and Medium-sized Enterprises

    NASA Astrophysics Data System (ADS)

    Hao, Zhang; Guangli, Xu; Yuhuan, Zhang; Yilong, Lei

    Small and Medium-sized Enterprises (SMEs) in the process of wage entry, calculation, the total number are needed to be done manually in the past, the data volume is quite large, processing speed is low, and it is easy to make error, which is resulting in low efficiency. The main purpose of writing this paper is to present the basis of salary management system, establish a scientific database, the computer payroll system, using the computer instead of a lot of past manual work in order to reduce duplication of staff labor, it will improve working efficiency.This system combines the actual needs of SMEs, through in-depth study and practice of the C/S mode, PowerBuilder10.0 development tools, databases and SQL language, Completed a payroll system needs analysis, database design, application design and development work. Wages, departments, units and personnel database file are included in this system, and have data management, department management, personnel management and other functions, through the control and management of the database query, add, delete, modify, and other functions can be realized. This system is reasonable design, a more complete function, stable operation has been tested to meet the basic needs of the work.

  6. Job Stress in the United Kingdom: Are Small and Medium-Sized Enterprises and Large Enterprises Different?

    PubMed

    Lai, Yanqing; Saridakis, George; Blackburn, Robert

    2015-08-01

    This paper examines the relationships between firm size and employees' experience of work stress. We used a matched employer-employee dataset (Workplace Employment Relations Survey 2011) that comprises of 7182 employees from 1210 private organizations in the United Kingdom. Initially, we find that employees in small and medium-sized enterprises experience lower level of overall job stress than those in large enterprises, although the effect disappears when we control for individual and organizational characteristics in the model. We also find that quantitative work overload, job insecurity and poor promotion opportunities, good work relationships and poor communication are strongly associated with job stress in the small and medium-sized enterprises, whereas qualitative work overload, poor job autonomy and employee engagements are more related with larger enterprises. Hence, our estimates show that the association and magnitude of estimated effects differ significantly by enterprise size.

  7. Job Stress in the United Kingdom: Are Small and Medium-Sized Enterprises and Large Enterprises Different?

    PubMed

    Lai, Yanqing; Saridakis, George; Blackburn, Robert

    2015-08-01

    This paper examines the relationships between firm size and employees' experience of work stress. We used a matched employer-employee dataset (Workplace Employment Relations Survey 2011) that comprises of 7182 employees from 1210 private organizations in the United Kingdom. Initially, we find that employees in small and medium-sized enterprises experience lower level of overall job stress than those in large enterprises, although the effect disappears when we control for individual and organizational characteristics in the model. We also find that quantitative work overload, job insecurity and poor promotion opportunities, good work relationships and poor communication are strongly associated with job stress in the small and medium-sized enterprises, whereas qualitative work overload, poor job autonomy and employee engagements are more related with larger enterprises. Hence, our estimates show that the association and magnitude of estimated effects differ significantly by enterprise size. PMID:24302431

  8. Managers' Understanding of Workplace Health Promotion within Small and Medium-Sized Enterprises: A Phenomenological Study

    ERIC Educational Resources Information Center

    Moore, Ann; Parahoo, Kader; Fleming, Paul

    2011-01-01

    Objective: This study aimed at exploring managers' understanding of workplace health promotion and experiences of workplace health promotion activity within small and medium-sized enterprises. Design: A Heideggerian interpretive phenomenological methodology was adopted. Setting: This study was undertaken with small and medium-sized enterprise…

  9. Sustainability and Small to Medium Sized Enterprises--How to Engage Them

    ERIC Educational Resources Information Center

    Condon, Linda

    2004-01-01

    Small and medium sized enterprises (SMEs) have a major advantage over larger organisations in regard to addressing sustainability issues--their size means they are able to react very quickly to changes in the business environment. They are disadvantaged, however, by lack of information on marketplace changes that make sustainability an opportunity…

  10. Successful E-Learning in Small and Medium-Sized Enterprises

    ERIC Educational Resources Information Center

    Paulsen, Morten Flate

    2009-01-01

    So far, e-learning has primarily been used when there are many learners involved. The up-front investments related to e-learning are relatively high, and may be perceived as prohibitive for small and medium-sized enterprises (SMEs). Some e-learning is, however, getting less expensive, and some e-learning models are more suited for small-scale…

  11. Supporting the E-Business Readiness of Small and Medium-Sized Enterprises: Approaches and Metrics.

    ERIC Educational Resources Information Center

    Jutla, Dawn; Bodorik, Peter; Dhaliwal, Jasbir

    2002-01-01

    Presents a conceptual model for governments in creating a climate that facilitates the national adoption of e-business. Focuses on the needs of small and medium-sized enterprises, suggests measures to assess how a country is performing in providing a positive e-business climate, and provides examples from Canada, The Netherlands, Norway, and…

  12. Barriers to Employee Training in Small and Medium Sized Enterprises: Insights and Evidences from Mauritius

    ERIC Educational Resources Information Center

    Padachi, Kesseven; Bhiwajee, Soolakshna Lukea

    2016-01-01

    Purpose: Training is an important component of successful business concerns. However, although there is growing acceptance amongst scholars that small- and medium-sized enterprises (SMEs) are engines that drive economies across nations, through their contribution in terms of job creation and poverty reduction; extant research portray that these…

  13. Canadian Colleges and Institutes and Small- and Medium-Sized Enterprises, Productivity at Work.

    ERIC Educational Resources Information Center

    Association of Canadian Community Colleges.

    This document was prepared by the Association of Community Colleges in order to describe the relationship between colleges and small- and medium-sized enterprises in Canada. The ACCC collected information for this survey from the 150 Canadian colleges by conducting a literature/data review and a survey of member institutions in addition to on site…

  14. Resource efficiency and culture--workplace training for small and medium-sized enterprises.

    PubMed

    Bliesner, Anna; Liedtke, Christa; Rohn, Holger

    2014-05-15

    Although there are already some qualification offers available for enterprises to support resource efficiency innovations, the high potentials that can be identified especially for small and medium sized enterprises (SMEs) have not been activated until now. As successful change lies in the hands of humans, the main aim of vocational education has to be the promotion of organisational and cultural changes in the enterprises. As there is already a small but increasing number of enterprises that perform very well in resource efficiency innovations one question arises: What are typical characteristics of those enterprises? Leaning on a good-practice approach, the project "ResourceCulture" is going to prove or falsify the hypothesis that enterprises being successful with resource efficiency innovations have a specific culture of trust, which substantially contributes to innovation processes, or even initially enables them. Detailed empirical field research will light up which correlations between resource efficiency, innovation and cultures of trust can be found and will offer important aspects for the improvement of management instruments and qualification concepts for workplace training. The project seizes qualification needs that were likewise mentioned by enterprises and consultants, regarding the implementation of resource efficiency. This article - based on first empirical field research results - derives preliminary indications for the design of the qualification module for the target groups resource efficiency consultants and managers. On this basis and in order to implement "ResourceCulture" conceptual and methodological starting points for workplace training are outlined. PMID:24364995

  15. Resource efficiency and culture--workplace training for small and medium-sized enterprises.

    PubMed

    Bliesner, Anna; Liedtke, Christa; Rohn, Holger

    2014-05-15

    Although there are already some qualification offers available for enterprises to support resource efficiency innovations, the high potentials that can be identified especially for small and medium sized enterprises (SMEs) have not been activated until now. As successful change lies in the hands of humans, the main aim of vocational education has to be the promotion of organisational and cultural changes in the enterprises. As there is already a small but increasing number of enterprises that perform very well in resource efficiency innovations one question arises: What are typical characteristics of those enterprises? Leaning on a good-practice approach, the project "ResourceCulture" is going to prove or falsify the hypothesis that enterprises being successful with resource efficiency innovations have a specific culture of trust, which substantially contributes to innovation processes, or even initially enables them. Detailed empirical field research will light up which correlations between resource efficiency, innovation and cultures of trust can be found and will offer important aspects for the improvement of management instruments and qualification concepts for workplace training. The project seizes qualification needs that were likewise mentioned by enterprises and consultants, regarding the implementation of resource efficiency. This article - based on first empirical field research results - derives preliminary indications for the design of the qualification module for the target groups resource efficiency consultants and managers. On this basis and in order to implement "ResourceCulture" conceptual and methodological starting points for workplace training are outlined.

  16. Services Supporting Knowledge Maturing in Small and Medium-Sized Enterprises

    NASA Astrophysics Data System (ADS)

    Maier, Ronald

    The hype around Web 2.0 has again sparked tremendous interest in IT-supported knowledge management and technology-enhanced learning in organizations. Although there has been abundant evidence of how to benefit from Web 2.0 technologies, information on how to go about deploying these in small and medium-sized enterprises in a coordinated manner are scarce. Based on the findings of an empirical study and an ethnographically informed study on knowledge maturing, this paper suggests a set of knowledge services to support a series of knowledge actions chained with the help of the knowledge maturing model. This set of services can be used by small and medium-sized enterprises for analyzing IT tools and systems which currently support their employees’ knowledge maturing activities, to foster knowledge cooperation with customers, suppliers and partners in their business environment and to find gaps which can be filled particularly by consuming services over the Web.

  17. Consultant-Client Relationship and Knowledge Transfer in Small- and Medium-Sized Enterprises Change Processes.

    PubMed

    Martinez, Luis F; Ferreira, Aristides I; Can, Amina B

    2016-04-01

    Based on Szulanski's knowledge transfer model, this study examined how the communicational, motivational, and sharing of understanding variables influenced knowledge transfer and change processes in small- and medium-sized enterprises, particularly under projects developed by funded programs. The sample comprised 144 entrepreneurs, mostly male (65.3%) and mostly ages 35 to 45 years (40.3%), who filled an online questionnaire measuring the variables of "sharing of understanding," "motivation," "communication encoding competencies," "source credibility," "knowledge transfer," and "organizational change." Data were collected between 2011 and 2012 and measured the relationship between clients and consultants working in a Portuguese small- and medium-sized enterprise-oriented action learning program. To test the hypotheses, structural equation modeling was conducted to identify the antecedents of sharing of understanding, motivational, and communicational variables, which were positively correlated with the knowledge transfer between consultants and clients. This transfer was also positively correlated with organizational change. Overall, the study provides important considerations for practitioners and academicians and establishes new avenues for future studies concerning the issues of consultant-client relationship and the efficacy of Government-funded programs designed to improve performance of small- and medium-sized enterprises.

  18. Consultant-Client Relationship and Knowledge Transfer in Small- and Medium-Sized Enterprises Change Processes.

    PubMed

    Martinez, Luis F; Ferreira, Aristides I; Can, Amina B

    2016-04-01

    Based on Szulanski's knowledge transfer model, this study examined how the communicational, motivational, and sharing of understanding variables influenced knowledge transfer and change processes in small- and medium-sized enterprises, particularly under projects developed by funded programs. The sample comprised 144 entrepreneurs, mostly male (65.3%) and mostly ages 35 to 45 years (40.3%), who filled an online questionnaire measuring the variables of "sharing of understanding," "motivation," "communication encoding competencies," "source credibility," "knowledge transfer," and "organizational change." Data were collected between 2011 and 2012 and measured the relationship between clients and consultants working in a Portuguese small- and medium-sized enterprise-oriented action learning program. To test the hypotheses, structural equation modeling was conducted to identify the antecedents of sharing of understanding, motivational, and communicational variables, which were positively correlated with the knowledge transfer between consultants and clients. This transfer was also positively correlated with organizational change. Overall, the study provides important considerations for practitioners and academicians and establishes new avenues for future studies concerning the issues of consultant-client relationship and the efficacy of Government-funded programs designed to improve performance of small- and medium-sized enterprises. PMID:27154382

  19. Occupational safety and health in small and medium-sized enterprises during social and economic transformation.

    PubMed

    Koradecka, D

    2001-01-01

    Small and medium-sized enterprises (SMEs) in Central and Eastern Europe at the turn of the 1980s and 1990s were characterised by many people exposed to hazardous working conditions. Statistics recorded a considerable increase in the number of occupational diseases. They also showed that it was more dangerous to work for a small company. The transition from planned to market economy has brought about an increase in the number of SMEs in Poland. Data on them are provided. The role of the Central Institute for Labour Protection in studying SMEs is presented. A pilot study of employers and employees is discussed.

  20. Impact of Top Management Team on Firm Performance in Small and Medium-Sized Enterprises Adopting Commercial Open-Source Enterprise Resource Planning

    ERIC Educational Resources Information Center

    Cereola, Sandra J.; Wier, Benson; Norman, Carolyn Strand

    2012-01-01

    Based on the large number of small and medium-sized enterprises (SMEs) in the United States, their increasing interest in enterprise-wide software systems and their impact on the US economy, it is important to understand the determinants that can facilitate the successful implementation and assimilation of such technology into these firms' daily…

  1. Towards a Service-Oriented Enterprise: The Design of a Cloud Business Integration Platform in a Medium-Sized Manufacturing Enterprise

    ERIC Educational Resources Information Center

    Stamas, Paul J.

    2013-01-01

    This case study research followed the two-year transition of a medium-sized manufacturing firm towards a service-oriented enterprise. A service-oriented enterprise is an emerging architecture of the firm that leverages the paradigm of services computing to integrate the capabilities of the firm with the complementary competencies of business…

  2. [Application of health questionnaires for health management in small- and medium-sized enterprises].

    PubMed

    Kishida, K; Saito, M; Hasegawa, T; Aoki, S; Suzuki, S

    1986-01-01

    Two kinds of health questionnaires, the Todai Health Index (THI) and Cumulative Fatigue Index (CFI), were applied as a screening device for health management of workers belonging to small-medium sized enterprises. A total of 495 workers composed of 452 male workers of a glass-bottle manufacturing factory and 43 male workers of a soft-drink bottling factory were the subjects of the present study. It was found that the two kinds of health questionnaires were different from each other and have their own characteristics. Twelve scales of THI were grouped into two, the first consisting of ten scales (SUSY, RESP, EYSK, MOUT, DIGE, IMPU, MENT, DEPR, NERV, and LIFE) and the second consisting of two scales (AGGR and LISC). Nine categories of CFI were grouped into one by using principal factor analysis. It was confirmed that the twelve scale scores of THI obtained at small-medium sized factories differed from those scale scores of a reference group investigated at a large-sized enterprise. It is on the basis of the scales of aggressiveness and lies and also of the scale of mental unstability which characterizes workers, locality, job (clerical or field work), and size of industry (large or small sized) that the difference could be evaluated. Urban life characterized by a life style of staying up late at night and waking up late in the morning has been reflected on the scale of life irregularity. Irregularity of life induced by transformation of working schedule, such as two or three shifts of work and overtime, was also reflected on this scale. Two scales of THI test, i.e., many subjective symptoms and digestive organ complaints, seemed to be the representative scales indicating a close relation between work load and health level. The discriminant score for diagnosis of psychosomatic diseases is considered to be one of the most useful assessments of the individual's health condition. As mentioned above, THI is recommended as a convenient assessment method for health

  3. Hybrid neural intelligent system to predict business failure in small-to-medium-size enterprises.

    PubMed

    Borrajo, M Lourdes; Baruque, Bruno; Corchado, Emilio; Bajo, Javier; Corchado, Juan M

    2011-08-01

    During the last years there has been a growing need of developing innovative tools that can help small to medium sized enterprises to predict business failure as well as financial crisis. In this study we present a novel hybrid intelligent system aimed at monitoring the modus operandi of the companies and predicting possible failures. This system is implemented by means of a neural-based multi-agent system that models the different actors of the companies as agents. The core of the multi-agent system is a type of agent that incorporates a case-based reasoning system and automates the business control process and failure prediction. The stages of the case-based reasoning system are implemented by means of web services: the retrieval stage uses an innovative weighted voting summarization of self-organizing maps ensembles-based method and the reuse stage is implemented by means of a radial basis function neural network. An initial prototype was developed and the results obtained related to small and medium enterprises in a real scenario are presented. PMID:21809475

  4. Hybrid neural intelligent system to predict business failure in small-to-medium-size enterprises.

    PubMed

    Borrajo, M Lourdes; Baruque, Bruno; Corchado, Emilio; Bajo, Javier; Corchado, Juan M

    2011-08-01

    During the last years there has been a growing need of developing innovative tools that can help small to medium sized enterprises to predict business failure as well as financial crisis. In this study we present a novel hybrid intelligent system aimed at monitoring the modus operandi of the companies and predicting possible failures. This system is implemented by means of a neural-based multi-agent system that models the different actors of the companies as agents. The core of the multi-agent system is a type of agent that incorporates a case-based reasoning system and automates the business control process and failure prediction. The stages of the case-based reasoning system are implemented by means of web services: the retrieval stage uses an innovative weighted voting summarization of self-organizing maps ensembles-based method and the reuse stage is implemented by means of a radial basis function neural network. An initial prototype was developed and the results obtained related to small and medium enterprises in a real scenario are presented.

  5. IT Governance Practices in Small and Medium-Sized Enterprises: Recommendations from an Empirical Study

    NASA Astrophysics Data System (ADS)

    Huang, Rui; Zmud, Robert W.; Price, R. Leon

    Much has been learned through IT governance research about the nature of IT-related decisions, the location of decision rights for these decisions, and governance mechanisms applied to facilitate associated decision processes in large organisations. Our knowledge about IT governance structures in small and medium-sized enterprises (SME), on the other hand, is quite limited. Adopting a qualitative and inductive approach, this study examines the nature and influence of IT governance in SMEs through interviews with executives from three SMEs. Our results demonstrate that IT decision authority was centralized in all three SMEs but that senior management involvement in governance procedures and communication practices about governance policies were observed to explain differences in these organisations’ IT use. We propose recommendations based on the findings of this study.

  6. Using Computer-Based Continuing Professional Education of Training Staff to Develop Small- and Medium-Sized Enterprises in Thailand

    ERIC Educational Resources Information Center

    Sooraksa, Nanta

    2012-01-01

    This paper describes a career development program for staff involved in providing training for small- and medium-sized enterprises (SMEs) in Thailand. Most of these staff were professional vocational teachers in schools. The program uses information communication technology (ICT), and its main objective is to teach Moodle software as a tool for…

  7. Graduate Transition into Work: The Bridging Role of Graduate Placement Programmes in the Small- and Medium-Sized Enterprise Workplace

    ERIC Educational Resources Information Center

    Gallagher, Pádraig

    2015-01-01

    This research looks at the role of graduate placement programmes in bridging the gap between higher education and the small- and medium-sized enterprise (SME) sector. The research design and methodology used in this study was exploratory, in-depth and qualitative in nature. The research took the form of a multiple case study and focused on seven…

  8. Is Small Finally Becoming Beautiful? Small and Medium-Size Enterprises in the New Economy. IES Report.

    ERIC Educational Resources Information Center

    Dejonckheere, J.; Ramioul, M.; Van Hootegem, G.

    This report addresses small and medium-sized enterprises' (SMEs') role in the changing international division of labor and trade in information service activities. Chapter 2 describes the EMERGENCE project to map and measure eWork. Chapter 3 reviews literature that shows SMEs account for the overwhelming majority of companies and make a crucial…

  9. A Bayesian Approach to International Distributor Selection for Small and Medium-Sized Enterprises in the Software Industry

    ERIC Educational Resources Information Center

    Lui, Joseph P.

    2013-01-01

    Identifying appropriate international distributors for small and medium-sized enterprises (SMEs) in the software industry for overseas markets can determine a firm's future endeavors in international expansion. SMEs lack the complex skills in market research and decision analysis to identify suitable partners to engage in global market entry.…

  10. Concept of an Exchange Network for the Development of Vocational Training in Small and Medium-Sized Enterprises.

    ERIC Educational Resources Information Center

    Boudet, Rene

    An examination of the ways in which vocational training can be extended to small and medium-sized enterprises in the European Economic Community, this document consists of: an introduction; four parts containing multiple chapters; 10 case studies; and a bibliography. Following the introduction, which is an update of a report made in 1985, part one…

  11. Using the Critical Incident Technique to Research Decision Making regarding Access to Training and Development in Medium-Sized Enterprises

    ERIC Educational Resources Information Center

    Coetzer, Alan; Redmond, Janice; Sharafizad, Jalleh

    2012-01-01

    Employees in small and medium-sized enterprises (SMEs) form part of a "disadvantaged" group within the workforce that receives less access to training and development (T&D) than employees in large firms. Prior research into reasons for the relatively low levels of employee participation in training and development has typically involved surveys of…

  12. Virtual Class: Distance Learning for Small and Medium Sized Enterprises in the Spanish Region of Castilla y Leon.

    ERIC Educational Resources Information Center

    Rodriguez, Blanca; Perez, Maria Angeles; Verdu, Maria Jesus; Navazo, Maria Agustina; Lopez, Ricardo; Mompo, Rafael; Garcia, Joaquin

    Lifelong learning is becoming a necessity in the new Information Society where everyone, particularly small and medium sized enterprises (SMEs), must keep up with new technologies. Education and training are of the most importance in this updating. An interdisciplinary and inter-university work group called "Canalejas" (Spain) has developed a…

  13. Entrepreneurial Training for the Growth of Small and Medium-Sized Enterprises: Lessons from Central and Eastern Europe. Report.

    ERIC Educational Resources Information Center

    European Training Foundation, Turin (Italy).

    This report brings together a number of principles as to best practice in supporting, through training, growth of small and medium-sized enterprises (SMEs) in Central and Eastern Europe. Chapter 2 identifies key principles to be drawn from the West through a literature review. Chapter 3 reviews the "practice" of entrepreneurial training in Central…

  14. Drivers for OSH interventions in small and medium-sized enterprises.

    PubMed

    Cagno, Enrico; Masi, Donato; Leão, Celina Pinto

    2016-01-01

    The debate concerning occupational safety and health (OSH) interventions has recently focused on the need of improving the evaluation of interventions, and in particular on the need for providing information about why the intervention worked or not, under what circumstances and in which context. Key concepts in the analysis of the context are the drivers, i.e., those factors enabling, fostering or facilitating OSH interventions. However, the concept of driver for an OSH intervention is both confused and contested. Although the term is widely used, there is little consensus on how drivers should be understood, how important they are in different contexts and how they can facilitate interventions. This exploratory study based on interviews with the owner-managers and the safety officers of small and medium-sized enterprises (SMEs) gives an overview of the most characteristic drivers for OSH interventions. The results will be used to make an initial evaluation of SMEs' needs, and will help orient interventions and future research.

  15. Quantitative evaluation of waste prevention on the level of small and medium sized enterprises (SMEs).

    PubMed

    Laner, David; Rechberger, Helmut

    2009-02-01

    Waste prevention is a principle means of achieving the goals of waste management and a key element for developing sustainable economies. Small and medium sized enterprises (SMEs) contribute substantially to environmental degradation, often not even being aware of their environmental effects. Therefore, several initiatives have been launched in Austria aimed at supporting waste prevention measures on the level of SMEs. To promote the most efficient projects, they have to be evaluated with respect to their contribution to the goals of waste management. It is the aim of this paper to develop a methodology for evaluating waste prevention measures in SMEs based on their goal orientation. At first, conceptual problems of defining and delineating waste prevention activities are briefly discussed. Then an approach to evaluate waste prevention activities with respect to their environmental performance is presented and benchmarks which allow for an efficient use of the available funds are developed. Finally the evaluation method is applied to a number of former projects and the calculated results are analysed with respect to shortcomings and limitations of the model. It is found that the developed methodology can provide a tool for a more objective and comprehensible evaluation of waste prevention measures.

  16. Quantitative evaluation of waste prevention on the level of small and medium sized enterprises (SMEs)

    SciTech Connect

    Laner, David Rechberger, Helmut

    2009-02-15

    Waste prevention is a principle means of achieving the goals of waste management and a key element for developing sustainable economies. Small and medium sized enterprises (SMEs) contribute substantially to environmental degradation, often not even being aware of their environmental effects. Therefore, several initiatives have been launched in Austria aimed at supporting waste prevention measures on the level of SMEs. To promote the most efficient projects, they have to be evaluated with respect to their contribution to the goals of waste management. It is the aim of this paper to develop a methodology for evaluating waste prevention measures in SMEs based on their goal orientation. At first, conceptual problems of defining and delineating waste prevention activities are briefly discussed. Then an approach to evaluate waste prevention activities with respect to their environmental performance is presented and benchmarks which allow for an efficient use of the available funds are developed. Finally the evaluation method is applied to a number of former projects and the calculated results are analysed with respect to shortcomings and limitations of the model. It is found that the developed methodology can provide a tool for a more objective and comprehensible evaluation of waste prevention measures.

  17. Experimental testing of centrifugal pump: small and medium sized enterprise product

    NASA Astrophysics Data System (ADS)

    Ismail, R.; Paddiyatu, F.; Khafidh, M.; Nugroho, S.; Sugiyanto, S.; Jamari, J.

    2014-06-01

    This paper reports the experimental testing for centrifugal pump for fisherman ship, manufactured by small and medium sized enterprises in Central Java Province, Indonesia. The research covers material analysis, component observation, endurance and vibration test. Six centrifugal pumps are tested and three main pump components are discussed: shaft, bearings and seals. The results show that the material of the shaft is predicted to support and transmit the load from the engine to impeller. The problem found in the tolerance and geometry accuracy of the shaft which causes difficulties during assembling process, excessive wear and leakage during testing. From the endurance and vibration test, the ball bearings fail and lock the shaft due to the fatigue on the rolling elements and raceways. The oil seal and water seal also fail in maintaining the oil and water in the chamber and induce the unlubricated system for the ball bearings. Some suggestions are delivered to improve the product quality of the centrifugal pump. A good quality of the centrifugal pump for fishermen ship and long life span is expected to be produced by local SMEs to win the free trade competition in the Indonesian market.

  18. Drivers for OSH interventions in small and medium-sized enterprises.

    PubMed

    Cagno, Enrico; Masi, Donato; Leão, Celina Pinto

    2016-01-01

    The debate concerning occupational safety and health (OSH) interventions has recently focused on the need of improving the evaluation of interventions, and in particular on the need for providing information about why the intervention worked or not, under what circumstances and in which context. Key concepts in the analysis of the context are the drivers, i.e., those factors enabling, fostering or facilitating OSH interventions. However, the concept of driver for an OSH intervention is both confused and contested. Although the term is widely used, there is little consensus on how drivers should be understood, how important they are in different contexts and how they can facilitate interventions. This exploratory study based on interviews with the owner-managers and the safety officers of small and medium-sized enterprises (SMEs) gives an overview of the most characteristic drivers for OSH interventions. The results will be used to make an initial evaluation of SMEs' needs, and will help orient interventions and future research. PMID:26654679

  19. Provision and perception of occupational health in small and medium-sized enterprises in Sheffield, UK.

    PubMed

    Bradshaw, L M; Curran, A D; Eskin, F; Fishwick, D

    2001-02-01

    A random sample of managers of small and medium-sized enterprises (SMEs) was selected from a database of businesses in Sheffield, UK. They were invited to take part in a study to evaluate the provision and perception of occupational health in SMEs in Sheffield. The study used an interviewer-led questionnaire, which collected quantitative and qualitative data; each interview took approximately 40 min to complete. Several approaches to recruitment were adopted during the study. Twenty-eight managers were interviewed over the 6 month study period. All of the SMEs employed <250 people; 43.2% did not have or had never reviewed a written health and safety policy. Only 18% had a written occupational health policy; 14.4% employed the services of a part-time occupational health physician; 7.2% employed a health and safety advisor; and 10.8% employed a part-time occupational health nurse. Twenty-five per cent had a nominated person responsible for occupational health and 67% thought that a doctor or nurse would be the best person to provide an occupational health service. Twenty-eight per cent of the companies carried out some form of pre-employment screening and 14.2% carried out health promotion. Fifteen (53.5%) collected some form of health related absence data. Eight companies (28.6%) organized a formal induction programme for all new employees. Further work should be undertaken in an attempt to improve access to local industry and particularly to SMEs. This study has clearly shown that access is possible, but different strategies of approach were required before a workable strategy could be found. Undoubtedly, this access can be improved by better understanding of the interaction between researchers, occupational health providers and local managers of SMEs.

  20. Environmental education for small- and medium-sized enterprises: methodology and e-learning experience in the Valencian region.

    PubMed

    Cloquell-Ballester, Vicente-Agustín; Monterde-Díaz, Rafael; Cloquell-Ballester, Víctor-Andrés; Torres-Sibille, Ana Del Carmen

    2008-05-01

    The last decades have shown an increasing social demand for environmental awareness, which firms are inevitably required to adapt to. More and more, small- and medium-sized enterprises (SMEs) are finding it necessary to train their staff in environmental issues if they wish to survive in a market where it is no longer sufficient to excel in price competitiveness exclusively, but where quality, service and environmental standards also play an important role.

  1. The Small- and Medium-sized Enterprises Office (SME Office) at the European Medicines Agency.

    PubMed

    Carr, M

    2010-01-01

    On 15 December 2005, the European Medicines Agency (EMEA) launched an "SME Office" to provide financial and administrative assistance to micro-, small- and medium-sized enterprises (SMEs), with the aim of promoting innovation and the development of new human and veterinary medicinal products by SMEs. According to current EU definition of an SME, companies with fewer than 250 employees, and an annual turnover of not more than 50 million euro or an annual balance sheet total of not more than 43 million euro, are eligible for assistance from the SME Office. Incentives available from the EMEA for SMEs, include: Administrative and procedural assistance from SME Office within the Agency; Fee reductions (90%) for scientific advice and inspections; Fee exemptions for certain administrative services (excluding parallel distribution); Deferral of the fee payable for an application for marketing authorisation or related inspection until after the grant of the marketing authorisation; Conditional fee exemption where scientific advice followed and marketing application is unsuccessful; Assistance with translations of the product information documents. At the end of May 2009, more than 380 companies from 21 countries across the European Economic Area (EEA) had SME status assigned by the EMEA. The large majority of companies are developing medicinal products for human use, 16 are veterinary companies, 15 companies are developing products for both human and veterinary use and 38 are regulatory consultants. Since the SME initiative started the Agency has processed more than 130 requests for scientific advice with fee reductions totalling of 6.9 million euro. Regulatory assistance has been provided to more than 170 companies and 12 companies have benefited from the SME translation service. Stakeholders have acknowledged the significant role the SME Office now plays as a service provider. In the period between January 2006 and June 2009, 34 applications for marketing authorization

  2. The Small- and Medium-sized Enterprises Office (SME Office) at the European Medicines Agency.

    PubMed

    Carr, M

    2010-01-01

    On 15 December 2005, the European Medicines Agency (EMEA) launched an "SME Office" to provide financial and administrative assistance to micro-, small- and medium-sized enterprises (SMEs), with the aim of promoting innovation and the development of new human and veterinary medicinal products by SMEs. According to current EU definition of an SME, companies with fewer than 250 employees, and an annual turnover of not more than 50 million euro or an annual balance sheet total of not more than 43 million euro, are eligible for assistance from the SME Office. Incentives available from the EMEA for SMEs, include: Administrative and procedural assistance from SME Office within the Agency; Fee reductions (90%) for scientific advice and inspections; Fee exemptions for certain administrative services (excluding parallel distribution); Deferral of the fee payable for an application for marketing authorisation or related inspection until after the grant of the marketing authorisation; Conditional fee exemption where scientific advice followed and marketing application is unsuccessful; Assistance with translations of the product information documents. At the end of May 2009, more than 380 companies from 21 countries across the European Economic Area (EEA) had SME status assigned by the EMEA. The large majority of companies are developing medicinal products for human use, 16 are veterinary companies, 15 companies are developing products for both human and veterinary use and 38 are regulatory consultants. Since the SME initiative started the Agency has processed more than 130 requests for scientific advice with fee reductions totalling of 6.9 million euro. Regulatory assistance has been provided to more than 170 companies and 12 companies have benefited from the SME translation service. Stakeholders have acknowledged the significant role the SME Office now plays as a service provider. In the period between January 2006 and June 2009, 34 applications for marketing authorization

  3. Analyzing the efficiency of small and medium-sized enterprises of a national technology innovation research and development program.

    PubMed

    Park, Sungmin

    2014-01-01

    This study analyzes the efficiency of small and medium-sized enterprises (SMEs) of a national technology innovation research and development (R&D) program. In particular, an empirical analysis is presented that aims to answer the following question: "Is there a difference in the efficiency between R&D collaboration types and between government R&D subsidy sizes?" Methodologically, the efficiency of a government-sponsored R&D project (i.e., GSP) is measured by Data Envelopment Analysis (DEA), and a nonparametric analysis of variance method, the Kruskal-Wallis (KW) test is adopted to see if the efficiency differences between R&D collaboration types and between government R&D subsidy sizes are statistically significant. This study's major findings are as follows. First, contrary to our hypothesis, when we controlled the influence of government R&D subsidy size, there was no statistically significant difference in the efficiency between R&D collaboration types. However, the R&D collaboration type, "SME-University-Laboratory" Joint-Venture was superior to the others, achieving the largest median and the smallest interquartile range of DEA efficiency scores. Second, the differences in the efficiency were statistically significant between government R&D subsidy sizes, and the phenomenon of diseconomies of scale was identified on the whole. As the government R&D subsidy size increases, the central measures of DEA efficiency scores were reduced, but the dispersion measures rather tended to get larger. PMID:25120949

  4. Analyzing the efficiency of small and medium-sized enterprises of a national technology innovation research and development program.

    PubMed

    Park, Sungmin

    2014-01-01

    This study analyzes the efficiency of small and medium-sized enterprises (SMEs) of a national technology innovation research and development (R&D) program. In particular, an empirical analysis is presented that aims to answer the following question: "Is there a difference in the efficiency between R&D collaboration types and between government R&D subsidy sizes?" Methodologically, the efficiency of a government-sponsored R&D project (i.e., GSP) is measured by Data Envelopment Analysis (DEA), and a nonparametric analysis of variance method, the Kruskal-Wallis (KW) test is adopted to see if the efficiency differences between R&D collaboration types and between government R&D subsidy sizes are statistically significant. This study's major findings are as follows. First, contrary to our hypothesis, when we controlled the influence of government R&D subsidy size, there was no statistically significant difference in the efficiency between R&D collaboration types. However, the R&D collaboration type, "SME-University-Laboratory" Joint-Venture was superior to the others, achieving the largest median and the smallest interquartile range of DEA efficiency scores. Second, the differences in the efficiency were statistically significant between government R&D subsidy sizes, and the phenomenon of diseconomies of scale was identified on the whole. As the government R&D subsidy size increases, the central measures of DEA efficiency scores were reduced, but the dispersion measures rather tended to get larger.

  5. [Cultivation strategy and path analysis on big brand Chinese medicine for small and medium-sized enterprises].

    PubMed

    Wang, Yong-Yan; Yang, Hong-Jun

    2014-03-01

    Small and medium-sized enterprises (SMEs) are important components in Chinese medicine industry. However, the lack of big brand is becoming an urgent problem which is critical to the survival of SMEs. This article discusses the concept and traits of Chinese medicine of big brand, from clinical, scientific and market value three aspects. Guided by market value, highlighting clinical value, aiming at the scientific value improvement of big brand cultivation, we put forward the key points in cultivation, aiming at obtaining branded Chinese medicine with widely recognized efficacy, good quality control system and mechanism well explained and meanwhile which can bring innovation improvement to theory of Chinese medicine. According to the characters of SMEs, we hold a view that to build multidisciplinary research union could be considered as basic path, and then, from top-level design, skill upgrading and application three stages to probe the implementation strategy.

  6. [Cultivation strategy and path analysis on big brand Chinese medicine for small and medium-sized enterprises].

    PubMed

    Wang, Yong-Yan; Yang, Hong-Jun

    2014-03-01

    Small and medium-sized enterprises (SMEs) are important components in Chinese medicine industry. However, the lack of big brand is becoming an urgent problem which is critical to the survival of SMEs. This article discusses the concept and traits of Chinese medicine of big brand, from clinical, scientific and market value three aspects. Guided by market value, highlighting clinical value, aiming at the scientific value improvement of big brand cultivation, we put forward the key points in cultivation, aiming at obtaining branded Chinese medicine with widely recognized efficacy, good quality control system and mechanism well explained and meanwhile which can bring innovation improvement to theory of Chinese medicine. According to the characters of SMEs, we hold a view that to build multidisciplinary research union could be considered as basic path, and then, from top-level design, skill upgrading and application three stages to probe the implementation strategy. PMID:25204160

  7. Risk determinants of small and medium-sized manufacturing enterprises (SMEs) - an exploratory study in New Zealand

    NASA Astrophysics Data System (ADS)

    Islam, Ariful; Tedford, Des

    2012-08-01

    The smooth running of small and medium-sized manufacturing enterprises (SMEs) presents a significant challenge irrespective of the technological and human resources they may have at their disposal. SMEs continuously encounter daily internal and external undesirable events and unwanted setbacks to their operations that detract from their business performance. These are referred to as `disturbances' in our research study. Among the disturbances, some are likely to create risks to the enterprises in terms of loss of production, manufacturing capability, human resource, market share, and, of course, economic losses. These are finally referred to as `risk determinant' on the basis of their correlation with some risk indicators, which are linked to operational, occupational, and economic risks. To deal with these risk determinants effectively, SMEs need a systematic method of approach to identify and treat their potential effects along with an appropriate set of tools. However, initially, a strategic approach is required to identify typical risk determinants and their linkage with potential business risks. In this connection, we conducted this study to explore the answer to the research question: what are the typical risk determinants encountered by SMEs? We carried out an empirical investigation with a multi-method research approach (a combination of a questionnaire-based mail survey involving 212 SMEs and five in-depth case studies) in New Zealand. This paper presents a set of typical internal and external risk determinants, which need special attention to be dealt with to minimize operational risks of an SME.

  8. Electronic business model for small- and medium-sized manufacturing enterprises (SME): a case study

    NASA Astrophysics Data System (ADS)

    Yuen, Karina; Chung, Walter W.

    2001-10-01

    This paper identifies three essential factors (information infrastructure, executive information system and a new manufacturing paradigm) that are used to support the development of a new business model for competitiveness. They facilitate changes in organization structure in support of business transformation. A SME can source a good manufacturing practice using a model of academic-university collaboration to gain competitive advantage in the e-business world. The collaboration facilitates the change agents to use information systems development as a vehicle to increase the capability of executives in using information and knowledge management to gain higher responsiveness and customer satisfaction. The case company is used to illustrate the application of a web-based executive information system to interface internal communications with external operation. It explains where a good manufacturing practice may be re-applied by other SMEs to acquire skills as a learning organization grows in an extended enterprise setting.

  9. Funding Continuing Training in Small and Medium-Sized Enterprises: Discussion and Case Studies from across the EU. CEDEFOP Panorama Series.

    ERIC Educational Resources Information Center

    Pukkinen, Tommi; Romijn, Clemens; Elson-Rogers, Sarah

    There are three main parts to this report of a study that used case studies to showcase the different approaches used to encourage more continuing training within small and medium-sized enterprises (SMEs) across the European Union (EU). Section 1 discusses the importance of funding training in SMEs and highlights the various types of funding…

  10. Effectiveness of a Comprehensive Stress Management Program to Reduce Work-Related Stress in a Medium-Sized Enterprise

    PubMed Central

    2014-01-01

    Objectives To assess the effectiveness of a comprehensive workplace stress management program consisting of participatory action-oriented training (PAOT) and individual management. Methods A comprehensive workplace stress management program was conducted in a medium-sized enterprise. The baseline survey was conducted in September 2011, using the Korean Occupational Stress Scale (KOSS) and Worker’s Stress Response Inventory (WSRI). After implementing both organizational and individual level interventions, the follow up evaluation was conducted in November 2011. Results Most of the workers participated in the organizational level PAOT and made Team-based improvement plans. Based on the stress survey, 24 workers were interviewed by a researcher. After the organizational and individual level interventions, there was a reduction of several adverse psychosocial factors and stress responses. In the case of blue-collar workers, psychosocial factors such as the physical environment, job demands, organizational system, lack of rewards, and occupational climate were significantly improved; in the case of white-collar workers, the occupational climate was improved. Conclusions In light of these results, we concluded that the comprehensive stress management program was effective in reducing work-related stress in a short-term period. A persistent long-term follow up is necessary to determine whether the observed effects are maintained over time. Both team-based improvement activities and individual interviews have to be sustainable and complementary to each other under the long-term plan. PMID:24524591

  11. Conducting Creativity Brainstorming Sessions in Small and Medium-Sized Enterprises Using Computer-Mediated Communication Tools

    NASA Astrophysics Data System (ADS)

    Murthy, Uday S.

    A variety of Web-based low cost computer-mediated communication (CMC) tools are now available for use by small and medium-sized enterprises (SME). These tools invariably incorporate chat systems that facilitate simultaneous input in synchronous electronic meeting environments, allowing what is referred to as “electronic brainstorming.” Although prior research in information systems (IS) has established that electronic brainstorming can be superior to face-to-face brainstorming, there is a lack of detailed guidance regarding how CMC tools should be optimally configured to foster creativity in SMEs. This paper discusses factors to be considered in using CMC tools for creativity brainstorming and proposes recommendations for optimally configuring CMC tools to enhance creativity in SMEs. The recommendations are based on lessons learned from several recent experimental studies on the use of CMC tools for rich brainstorming tasks that require participants to invoke domain-specific knowledge. Based on a consideration of the advantages and disadvantages of the various configuration options, the recommendations provided can form the basis for selecting a CMC tool for creativity brainstorming or for creating an in-house CMC tool for the purpose.

  12. [The certification of advanced therapy medicinal products. A quality label for product development in small and medium-sized enterprises].

    PubMed

    Berger, A; Schüle, S; Flory, E

    2011-07-01

    Advanced therapy medicinal products (ATMPs) are gene therapy, cell therapy, and tissue engineered products. To gain access to the market within the European Union, ATMPs must be authorized by the European Commission (EC). Especially for small and medium-sized enterprises (SMEs), the European centralized procedure of marketing authorization that is conducted by the European Medicines Agency (EMA) constitutes a major challenge, because SMEs often have little experience with regulatory procedures and many have limited financial possibilities. To tackle these challenges, a certification procedure exclusively for SMEs and their ATMP development was introduced by the EC. Independently from a marketing authorization application, development and/or production processes can be certified. An issued certificate demonstrates that the respective process meets the current regulatory and scientific requirements of the EMA, representing a valuable milestone for putative investors and licensees. This article highlights the background, the detailed procedure, the minimum requirements, as well as the costs of certification, while giving further noteworthy guidance for interested parties.

  13. Deriving default dermal exposure values for use in a risk assessment toolkit for small and medium-sized enterprises.

    PubMed

    Warren, N; Goede, H A; Tijssen, S C H A; Oppl, R; Schipper, H J; van Hemmen, J J

    2003-11-01

    This paper describes the derivation of default task-based dermal exposure values for use in a risk assessment toolkit for small and medium-sized enterprises (SMEs). A set of separately determined dermal exposure modifiers have been applied to published studies of dermal exposure to obtain 'normalized' dermal exposure data sets. These data sets are grouped according to task and then further subdivided by making a distinction between processes involving solid and liquid products. For each of the resulting 12 groups, two default exposure rates are required: potential exposure rate to the hands and potential exposure rate to the body. Default values for risk assessment are then derived by taking a weighted average of the 75th percentiles of these normalized exposure distributions. In addition, a measure of peak surface concentration is required to take into account the risk of local skin effects. The higher of the (modified) hand and body exposure rates after applying the relevant penetration factors for clothing and gloves is used. Usually this will be the hand exposure rate. These default values serve as robust initial exposure estimates in a risk assessment toolkit for SMEs.

  14. What affects the innovation performance of small and medium-sized enterprises (SMEs) in the biotechnology industry? An empirical study on Korean biotech SMEs.

    PubMed

    Kang, Kyung-Nam; Lee, Yoon-Sik

    2008-10-01

    Research-intensive small and medium-sized enterprises (SMEs) play a crucial role in the advancement of the biotechnology industry. This paper explored the impacts of internal and contextual variables on innovative activity in Korea and compared the results of this analysis with previous studies of other countries. Our analysis of 149 Korean biotech SMEs showed that the ratio of R&D expenditure to sales, the ratio of R&D employees to total employees, CEO characteristics, governmental support and international networking are positively correlated with a firm's innovation performance. The results may help decision makers to better foster SMEs in the Korean biotechnology industry.

  15. Report: Maximizing recycling participation to reduce waste to landfill: a study of small to medium-sized enterprises in Hobart, Tasmania, Australia.

    PubMed

    Parsons, Sam; Kriwoken, Lorne K

    2010-05-01

    Small to medium-sized enterprises (SMEs) in Hobart, Tasmania, Australia face many barriers to recycling participation. This study first investigated the volumes and types of waste produced by SMEs. Significant barriers were then identified and key motivators to recycle examined. Using the Australia New Zealand Standard of Industrial Classification, stratified sampling of SMEs (n = 436) was undertaken. Inadequate storage space, paucity of readily available information on recycling services and the lack of staff allocated to sort and recycle were identified as major barriers. Cardboard, paper and plastic waste were produced in large volumes with only a small percentage being recycled and these were identified as target areas for local government. Recommendations include the appointment of a dedicated recycling officer to maximize recycling participation for the reduction of waste to landfill and to undertake further research on minimizing recycling costs.

  16. Equal Opportunities and Vocational Training. Qualifications and Educational Needs of Co-Working Spouses of Owners of Small and Medium-Sized Enterprises.

    ERIC Educational Resources Information Center

    Riis-Jorgensen, Karin

    A study examined the training needs of women working in moderate-sized enterprises owned by their husbands. Information collected from interviews with spouses of business owners in Belgium, Denmark, the Federal Republic of Germany, France, and Italy confirmed the original hypothesis that in the kind of enterprise studied it is the man who owns the…

  17. Collaborative Manufacturing for Small-Medium Enterprises

    NASA Astrophysics Data System (ADS)

    Irianto, D.

    2016-02-01

    Manufacturing systems involve decisions concerning production processes, capacity, planning, and control. In a MTO manufacturing systems, strategic decisions concerning fulfilment of customer requirement, manufacturing cost, and due date of delivery are the most important. In order to accelerate the decision making process, research on decision making structure when receiving order and sequencing activities under limited capacity is required. An effective decision making process is typically required by small-medium components and tools maker as supporting industries to large industries. On one side, metal small-medium enterprises are expected to produce parts, components or tools (i.e. jigs, fixture, mold, and dies) with high precision, low cost, and exact delivery time. On the other side, a metal small- medium enterprise may have weak bargaining position due to aspects such as low production capacity, limited budget for material procurement, and limited high precision machine and equipment. Instead of receiving order exclusively, a small-medium enterprise can collaborate with other small-medium enterprise in order to fulfill requirements high quality, low manufacturing cost, and just in time delivery. Small-medium enterprises can share their best capabilities to form effective supporting industries. Independent body such as community service at university can take a role as a collaboration manager. The Laboratory of Production Systems at Bandung Institute of Technology has implemented shared manufacturing systems for small-medium enterprise collaboration.

  18. The Potential of Distance Education and Training for Small and Medium-Sized Enterprises in the Mediterranean Countries of the European Community. A Report for the Commission of the European Communities--Task Force Human Resources, Education, Training, and Youth.

    ERIC Educational Resources Information Center

    Quintino, Luisa

    An evaluation was made of the training needs of the small and medium-sized enterprises (SMEs) in Portugal, Spain, Greece, and Italy and the potential of open, distance, flexible, and multimedia learning to meet those needs. The methodology included contacts with training providers, governmental institutions, and SMEs and circulation of…

  19. Health-Related Quality of Life and Its Correlates among Chinese Migrants in Small- and Medium-Sized Enterprises in Two Cities of Guangdong

    PubMed Central

    Lu, Liming; Zou, Guanyang; Zeng, Zhi; Han, Lu; Guo, Yan; Ling, Li

    2014-01-01

    Objectives To explore the relationship between health-related quality of life (HRQOL) status and associated factors among rural-to-urban migrants in China. Methods A cross-sectional survey was conducted with 856 rural-to-urban migrants working at small- and medium-size enterprises (SMEs) in Shenzhen and Zhongshan City in 2012. Andersen's behavioral model was used as a theoretical framework to exam the relationships among factors affecting HRQOL. Analysis was performed using structural equation modeling (SEM). Results Workers with statutory working hours, higher wages and less migrant experience had higher HRQOL scores. Need (contracting a disease in the past two weeks and perception of needing health service) had the greatest total effect on HRQOL (β = −0.78), followed by enabling (labor contract, insurance purchase, income, physical examination during work and training) (β = 0.40), predisposing (age, family separation, education) (β = 0.22) and health practices and use of health service (physical exercise weekly, health check-up and use of protective equipments) (β = −0.20). Conclusions Priority should be given to satisfy the needs of migrant workers, and improve the enabling resources. PMID:24392084

  20. Results from an exploratory study to identify the factors that contribute to success for UK medical device small- and medium-sized enterprises.

    PubMed

    Hourd, P C; Williams, D J

    2008-07-01

    This paper reports the results from an exploratory study that sets out to identify and compare the strategic approaches and patterns of business practice employed by 14 UK small- and medium-sized enterprises to achieve success in the medical device sector of the health-care industry. An interview-based survey was used to construct individual case studies of the medical device technology (MDT) companies. A cross-case analysis was performed to search for patterns and themes that cut across these individual cases. Exploratory results revealed the heterogeneity of MDT companies and the distinctive features of the MDT innovation process that emphasize the importance of a strategic approach for achieving milestones in the product development and exploitation process and for creating value for the company and its stakeholders. Recognizing the heterogeneity of MDT companies, these exploratory findings call for further investigation to understand better the influence of components of the MDT innovation process on the commercialization life cycle and value trajectory. This is required to assist start-up or spin-out MDT companies in the UK and worldwide to navigate the critical transitions that determine access to financial and consumer markets and enhance the potential to build a successful business. This will be important not only for bioscience-based companies but also for engineering-based companies aiming to convert their activities into medical devices and the health- and social-care market.

  1. VerdEE: a new tool for the adoption of life-cycle assessment in small- and medium-sized enterprises

    NASA Astrophysics Data System (ADS)

    Masoni, Paolo; Scimia, Emanuela; Sara, Balazs

    2001-02-01

    Data and time requirements and complex methodological problems of a detailed Life Cycle Assessment (LCA) are well-known and discussed. Its application has specific difficulties in Italian Small- and Medium- sized Enterprises (SMEs) where environmental information is generally dispersed, a short-term problem-oriented environmental management approach is common and dedicated human resources are usually missing. As a consequence, a new procedure specifically designed for SMEs, VerdEE (Verifica dell'Eco-Efficienza - Verification of Eco-Efficiency), was developed and implemented on an interactive CD-ROM. It is based on the following criteria: relying on a life cycle approach; aimed at evaluating the environmental profile of a product and at identifying improvement opportunities; sufficiently simple to be applied in a limited time; containing as much quantitative information as possible to make it usable by a non-expert user. The VerdEE procedure includes four main steps: "Goal and Scope definition" semi-quantitative "Inventory" "Check-list" visualisation of results in "Matrix" and "Target-plot" form. The procedure is supported by an interconnected informative part about advantages of the life cycle approach for SMEs, principles of eco-design and environmental concerns.

  2. eVerdEE: a web-based screening life-cycle assessment tool for European small and medium-sized enterprises

    NASA Astrophysics Data System (ADS)

    Naldesi, Luciano; Buttol, Patrizia; Masoni, Paolo; Misceo, Monica; Sára, Balázs

    2004-12-01

    "eLCA" is a European Commission financed project aimed at realising "On line green tools and services for Small and Medium-sized Enterprises (SMEs)". Knowledge and use of Life Cycle Assessment (LCA) by SMEs are strategic to introduce the Integrated Product Policy (IPP) in Europe, but methodology simplification is needed. LCA requires a large amount of validated general and sector specific data. Since their availability and cost can be insuperable barriers for SMEs, pre-elaborated data/meta-data, use of standards and low cost solutions are required. Within the framework of the eLCA project an LCA software - eVerdEE - based on a simplified methodology and specialised for SMEs has been developed. eVerdEE is a web-based tool with some innovative features. Its main feature is the adaptation of ISO 14040 requirements to offer easy-to-handle functions with solid scientific bases. Complex methodological problems, such as the system boundaries definition, the data quality estimation and documentation, the choice of impact categories, are simplified according to the SMEs" needs. Predefined "Goal and Scope definition" and "Inventory" forms, a user-friendly and well structured procedure are time and cost-effective. The tool is supported by a database containing pre-elaborated environmental indicators of substances and processes for different impact categories. The impact assessment is calculated automatically by using the user"s input and the database values. The results have different levels of interpretation in order to identify the life cycle critical points and the improvement options. The use of a target plot allows the direct comparison of different design alternatives.

  3. The role of HIV/AIDS committees in effective workplace governance of HIV/AIDS in South African small and medium-sized enterprises (SMEs).

    PubMed

    Vaas, Jocelyn R

    2008-04-01

    The primary purpose of this study was to assess the role, status and scope of workplace HIV/AIDS committees as a means of effective workplace governance of the HIV/AIDS impact, and their role in extending social protective HIV/AIDS-related rights to employees. In-depth qualitative case studies were conducted in five South African small and medium-sized enterprises (SMEs) that were actively implementing HIV/AIDS policies and programmes. Companies commonly implemented HIV/AIDS policies and programmes through a workplace committee dedicated to HIV/AIDS or a generic committee dealing with issues other than HIV/ AIDS. Management, through the human resources department and the occupational health practitioner often drove initial policy formulation, and had virtually sole control of the HIV/AIDS budget. Employee members of committees were mostly volunteers, and were often production or blue collar employees, while there was a notable lack of participation by white-collar employees, line management and trade unions. While the powers of workplace committees were largely consultative, employee committee members often managed in an indirect manner to secure and extend social protective rights on HIV/AIDS to employees, and monitor their effective implementation in practice. In the interim, workplace committees represented one of the best means to facilitate more effective workplace HIV/AIDS governance. However, the increased demands on collective bargaining as a result of an anticipated rises in AIDS-related morbidity and mortality might prove to be beyond the scope of such voluntary committees in the longer term.

  4. Development and process evaluation of the participatory and action-oriented empowerment model facilitated by occupational health nurses for workplace health promotion in small and medium-sized enterprises.

    PubMed

    Nishikido, Noriko; Matsuda, Kazumi; Fukuda, Eiko; Motoki, Chiharu; Tsutaki, Miho; Kawakami, Yuko; Yuasa, Akiko; Iijima, Miyoko; Tanaka, Mika; Hirata, Mamoru; Hojoh, Minoru; Ikeda, Tomoko; Maeda, Kazutoshi; Miyoshi, Yukari; Arai, Sumiko; Mitsuhashi, Hiroyuki

    2007-01-01

    The objective of this study is to develop an available empowerment model for workplace health promotion (WHP) in small and medium-sized enterprises (SMEs) and to evaluate its applicability and feasibility. Semi-structured interviews with employers and workers in SMEs were conducted to assess their actual requirements for support. The structure of our new empowerment model was discussed and established through several rounds of focus group meetings with occupational safety and health researchers and practitioners on the basis of results of our interviews. We developed a new participatory and action-oriented empowerment model based on needs for support of employers and workers in SMEs. This new model consists of three originally developed tools: an action checklist, an information guidebook, and a book of good practices. As the facilitators, occupational health nurses (OHNs) from health insurance associations were trained to empower employers and workers using these tools. Approximately 80 SMEs (with less than 300 employees) were invited to participate in the model project. With these tools and continued empowerment by OHNs, employers and workers were able to smoothly work on WHP. This newly developed participatory and action-oriented empowerment model that was facilitated by trained OHNs appears to be both applicable and feasible for WHP in SMEs in Japan.

  5. Systematic Classifier OF Manufacturing Processes For Medium Size Shafts

    NASA Astrophysics Data System (ADS)

    Lychagin, D. V.; Lasukov, A. A.; Walter, A. V.; Arkhipova, D. A.

    2016-04-01

    The article considers some issues of increasing efficiency of manufacturing preparation as a part of manufacturing processes design at a machine building enterprise. A tree of routing manufacturing processes for machining shafts of medium size is described as an example of clustering parts according to their structural and technological characteristics. Processing route for a certain part included into a certain group is developed through choosing machining operations for elementary surfaces of a part from the process route developed for a template representative of the group.

  6. Micro-Sized Enterprises, Innovation and Universities: A Welsh Perspective

    ERIC Educational Resources Information Center

    Jones, Paul; Patz, Ralf; Thomas, Brychan; McCarthy, Simon

    2014-01-01

    This study considers the linkage between micro-sized enterprises and other organizations, especially universities, in relation to the innovation process. The focus of the research is on non-start-up enterprises in Wales and how they develop their products. The research methodology adopted is a thematic literature review and the case study…

  7. The Use of Financial Management Practices by Small, Medium and Micro Enterprises: A Perspective from South Africa

    ERIC Educational Resources Information Center

    Brijlal, Pradeep; Enow, Samuel; Isaacs, Eslyn B. H.

    2014-01-01

    This paper reports on an investigation of financial management practices used by small, medium-sized and micro-enterprises (SMMEs) in South Africa. It was found that more than half the SMMEs examined use external accounting staff to prepare accounting reports and more than 60% rely on external accounting staff to interpret and use accounting…

  8. An Agile Methodology for Implementing Service-Oriented Architecture in Small and Medium Sized Organizations

    ERIC Educational Resources Information Center

    Laidlaw, Gregory

    2013-01-01

    The purpose of this study is to evaluate the use of Lean/Agile principles, using action research to develop and deploy new technology for Small and Medium sized enterprises. The research case was conducted at the Lapeer County Sheriff's Department and involves the initial deployment of a Service Oriented Architecture to alleviate the data…

  9. Structures of medium-sized silicon clusters

    NASA Astrophysics Data System (ADS)

    Ho, Kai-Ming; Shvartsburg, Alexandre A.; Pan, Bicai; Lu, Zhong-Yi; Wang, Cai-Zhuang; Wacker, Jacob G.; Fye, James L.; Jarrold, Martin F.

    1998-04-01

    Silicon is the most important semiconducting material in the microelectronics industry. If current miniaturization trends continue, minimum device features will soon approach the size of atomic clusters. In this size regime, the structure and properties of materials often differ dramatically from those of the bulk. An enormous effort has been devoted to determining the structures of free silicon clusters. Although progress has been made for Sin with n < 8, theoretical predictions for larger clusters are contradictory and none enjoy any compelling experimental support. Here we report geometries calculated for medium-sized silicon clusters using an unbiased global search with a genetic algorithm. Ion mobilities determined for these geometries by trajectory calculations are in excellent agreement with the values that we measure experimentally. The cluster geometries that we obtain do not correspond to fragments of the bulk. For n = 12-18 they are built on a structural motif consisting of a stack of Si9 tricapped trigonal prisms. For n >= 19, our calculations predict that near-spherical cage structures become the most stable. The transition to these more spherical geometries occurs in the measured mobilities for slightly larger clusters than in the calculations, possibly because of entropic effects.

  10. Safety Management Practices in Small and Medium Enterprises in India

    PubMed Central

    Unnikrishnan, Seema; Iqbal, Rauf; Singh, Anju; Nimkar, Indrayani M.

    2014-01-01

    Background Small and medium enterprises (SMEs) are often the main pillar of an economy. Minor accidents, ergonomics problems, old and outdated machinery, and lack of awareness have created a need for implementation of safety practices in SMEs. Implementation of healthy working conditions creates positive impacts on economic and social development. Methods In this study, a questionnaire was developed and administered to 30 randomly chosen SMEs in and around Mumbai, Maharashtra, and other states in India to evaluate safety practices implemented in their facilities. The study also looked into the barriers and drivers for technology innovation and suggestions were also received from the respondent SMEs for best practices on safety issues. Results In some SMEs, risks associated with safety issues were increased whereas risks were decreased in others. Safety management practices are inadequate in most SMEs. Market competitiveness, better efficiency, less risk, and stringent laws were found to be most significant drivers; and financial constraints, lack of awareness, resistance to change, and lack of training for employees were found to be main barriers. Conclusion Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project. PMID:25830070

  11. From medium-sized to megawatt turbines...

    SciTech Connect

    Dongen, W. van

    1996-12-31

    One of the world`s first 500 kW turbines was installed in 1989 in the Netherlands. This forerunner of the current NedWind 500 kW range also represents the earliest predesign of the NedWind megawatt turbine. After the first 500 kW turbines with steel rotor blades and rotor diameter of 34 m, several design modifications followed, e.g. the rotor diameter was increased to 35 m and a tip brake was added. Later polyester blades were introduced and the rotor diameter was increased with 5 in. The drive train was also redesigned. Improvements on the 500 kW turbine concept has resulted in decreased cost, whereas annual energy output has increased to approx. 1.3 million kWh. Wind energy can substantially contribute to electricity supply. Maximum output in kiloWatthours is the target. Further improvement of the existing technology and implementation of flexible components may well prove to be a way to increase energy output, not only in medium or large sized wind turbines. 7 figs.

  12. The Challenge of Implementing an ERP System in a Small and Medium Enterprise--A Teaching Case of ERP Project Management

    ERIC Educational Resources Information Center

    Xu, Hongjiang; Rondeau, Patrick J.; Mahenthiran, Sakthi

    2011-01-01

    Enterprise Resource Planning (ERP) system implementation projects are notoriously risky. While large-scale ERP cases continue to be developed, relatively few new ERP cases have been published that further ERP implementation education in small to medium size firms. This case details the implementation of a new ERP system in a medium sized…

  13. Small and Medium Enterprise Aid Programs: Intangible Effects and Evaluation Practice.

    ERIC Educational Resources Information Center

    Stame, Nicoletta

    1999-01-01

    Contrasts different methods of evaluating aid programs to small and medium enterprises. Methods focus on the relationship between beneficiaries and program implementers to explore the role intangible relational means play in specific cultural contexts. (SLD)

  14. Waste generation and utilisation in micro-sized furniture-manufacturing enterprises in Turkey.

    PubMed

    Top, Y

    2015-01-01

    The number of small-scale businesses within most national economies is generally high, especially in developing countries. Often these businesses have a weak economic status and limited environmental awareness. The type and amount of waste produced, and the recycling methods adopted by these businesses during their operation can have negative effects on the environment. This study investigated the types of waste generated and the recycling methods adopted in micro-sized enterprises engaged in the manufacture of furniture. An assessment was also made of whether the characteristics of the enterprise had any effect on the waste recycling methods that were practised. A survey was conducted of 31 enterprises in the furniture industry in Gumushane province, Turkey, which is considered a developing economy. Surveys were undertaken via face-to-face interviews. It was found that medium-density fibreboard (MDF), and to a lesser extent, chipboard, were used in the manufacture of furniture, and two major types of waste in the form of fine dust and small fragments of board are generated during the cutting of these boards. Of the resulting composite board waste, 96.9% was used for heating homes and workplaces, where it was burnt under conditions of incomplete combustion. Enterprises were found to have adopted other methods to utilise their wastes in addition to using them as fuel. Such enterprises include those operating from a basement or first floor of a building in the cities, those continuing production throughout the year, those in need for capital and those enterprises not operating a dust-collection system. PMID:25453314

  15. Waste generation and utilisation in micro-sized furniture-manufacturing enterprises in Turkey.

    PubMed

    Top, Y

    2015-01-01

    The number of small-scale businesses within most national economies is generally high, especially in developing countries. Often these businesses have a weak economic status and limited environmental awareness. The type and amount of waste produced, and the recycling methods adopted by these businesses during their operation can have negative effects on the environment. This study investigated the types of waste generated and the recycling methods adopted in micro-sized enterprises engaged in the manufacture of furniture. An assessment was also made of whether the characteristics of the enterprise had any effect on the waste recycling methods that were practised. A survey was conducted of 31 enterprises in the furniture industry in Gumushane province, Turkey, which is considered a developing economy. Surveys were undertaken via face-to-face interviews. It was found that medium-density fibreboard (MDF), and to a lesser extent, chipboard, were used in the manufacture of furniture, and two major types of waste in the form of fine dust and small fragments of board are generated during the cutting of these boards. Of the resulting composite board waste, 96.9% was used for heating homes and workplaces, where it was burnt under conditions of incomplete combustion. Enterprises were found to have adopted other methods to utilise their wastes in addition to using them as fuel. Such enterprises include those operating from a basement or first floor of a building in the cities, those continuing production throughout the year, those in need for capital and those enterprises not operating a dust-collection system.

  16. Social Networks, Social Media and Absorptive Capacity in Regional Small and Medium Enterprises (SMES) in Australia

    ERIC Educational Resources Information Center

    Bosua, Rachelle; Evans, Nina; Sawyer, Janet

    2013-01-01

    Small and Medium Enterprises (SMEs) are major sources of prosperity and employment and are viewed as critical to regional development in Australia. A key factor to foster productivity and growth in SMEs is their ability to identify, acquire, transform and exploit external knowledge. This ability, referred to as the "absorptive capacity…

  17. Knowledge Production in Small and Medium Sized Enterprises

    ERIC Educational Resources Information Center

    Van der Meer, Han

    2010-01-01

    This article presents the author's response to Hisham B. Ghassib's (2010) article entitled "Where Does Creativity Fit into a Productivist Industrial Model of Knowledge Production?" When the author tries to characterise Ghassib's (2010) world, three words come into mind: University, Scientific Knowledge, and Marx. The author's world on the other…

  18. Systematic Analysis on the Environment of Innovative Small and Medium Enterprises

    NASA Astrophysics Data System (ADS)

    Guo, Tao; Shi, Zhuqing

    Environment has great influence on the growth of Innovative SMEs(small and medium enterprises), and Such enterprises has special requirements to growth environment. The ecological factors of Innovative SMEs growth environment include policy and law, social culture, finance, science and technology, market, service, and nature which get together with interactive and interrelated. Innovative SMEs depend on the environment; at the same time react to the environment, so as to achieve sustained innovation and healthy growth in the process of interaction with ecological environment.

  19. Historical Research and Medium-Sized Public Libraries: The Potential.

    ERIC Educational Resources Information Center

    Piehl, Charles K.

    1982-01-01

    Discusses the special collections and archival materials often found in medium-sized public libraries which should be fully used by historical researchers. It is suggested that public libraries need to advertise their collections which are of historical interest and to be more aware of the needs of the historical researcher. (Author/JL)

  20. Using Bitmaps for Medium Sized Information Retrieval Systems.

    ERIC Educational Resources Information Center

    Bookstein, A.; Klein, S. T.

    1990-01-01

    Describes the theoretical framework of a retrieval system that uses data structures called bitmaps to improve search algorithms for medium-sized systems. Information retrieval systems that contain the full text of the documents are discussed, and the use of inverted files such as concordances for small texts is explained. (24 references) (LRW)

  1. Library Webmasters in Medium-Sized Academic Libraries

    ERIC Educational Resources Information Center

    Kneip, Jason

    2007-01-01

    Library webmasters in medium-sized academic libraries were surveyed about their educational backgrounds, job responsibilities, and training and experience levels in Web development. The article summarizes the findings of the survey with recommendations for libraries and library and information science programs. (Contains 7 tables, 5 figures,and 5…

  2. Marketing information system online design for craftsmen small medium enterprises (case study: craftsmen ac)

    NASA Astrophysics Data System (ADS)

    Fitriana, Rina; Kurniawan, Wawan; Barlianto, Anung; Adriansyah Putra, Rizki

    2016-02-01

    AC is small and medium enterprises which is engaged in the field of crafts. This SME (Small Medium Enterprise) didn't have an integrated information system for managing sales. This research aims to design a marketing Information system online as applications that built as web base. The integrated system is made to manage sales and expand its market share. This study uses a structured analysis and design in its approach to build systems and also implemented a marketing framework of STP (Segmentation, Targeting, Positioning) and 4P (Price, Product, Place, Promotion) to obtain market analysis. The main market target customer craftsmen AC is women aged 13 years to 35 years. The products produced by AC are shoes, brooch, that are typical of the archipelago. The prices is range from Rp. 2000 until Rp. 400.000. Marketing information system online can be used as a sales transaction document, promoting the goods, and for customer booking products.

  3. Current information technology needs of small to medium sized apparel manufacturers and contractors

    SciTech Connect

    Wimple, C., LLNL

    1998-04-01

    This report documents recent efforts of the American Textile Partnership (AMTEX{sup TM}) Demand Activated Manufacturing Architecture (DAMA) Project to identify opportunities for cost effective enhanced information technology use by small to medium sized apparel manufacturers and contractors. Background on the AMTEX/DAMA project and objectives for the specific DAMA Small and Medium Enterprise (SME) effort are discussed in this section. The approach used to gather information about current opportunities or needs is outlined in Section 2 Approach, and relevant findings are identified and a brief analysis of the information gathered is presented in Section 3 Findings. Recommendations based on the analysis, are offered in Section 4 Recommendations, and plans are suggested for DAMA follow-on in Section 5 Future Plans. Trip reports for each of the companies visited are contained in Appendix E - Company Trip Reports. These individual reports contain the data upon which the analysis presented in Section 3 Findings is based.

  4. Culture, Organizational Learning and Selected Employee Background Variables in Small-Size Business Enterprises

    ERIC Educational Resources Information Center

    Graham, Carroll M.; Nafukho, Fredrick Muyia

    2007-01-01

    Purpose: The purpose of this study is to determine the relationship between four independent variables educational level, longevity, type of enterprise, and gender and the dependent variable culture, as a dimension that explains organizational learning readiness in seven small-size business enterprises. Design/methodology/approach: An exploratory…

  5. Effective-medium theory for finite-size aggregates.

    PubMed

    Guérin, Charles-Antoine; Mallet, Pierre; Sentenac, Anne

    2006-02-01

    We propose an effective-medium theory for random aggregates of small spherical particles that accounts for the finite size of the embedding volume. The technique is based on the identification of the first two orders of the Born series within a finite volume for the coherent field and the effective field. Although the convergence of the Born series requires a finite volume, the effective constants that are derived through this identification are shown to admit of a large-scale limit. With this approach we recover successively, and in a simple manner, some classical homogenization formulas: the Maxwell Garnett mixing rule, the effective-field approximation, and a finite-size correction to the quasi-crystalline approximation (QCA). The last formula is shown to coincide with the usual low-frequency QCA in the limit of large volumes, while bringing substantial improvements when the dimension of the embedding medium is of the order of the probing wavelength. An application to composite spheres is discussed.

  6. Promoting mental health in small-medium enterprises: An evaluation of the "Business in Mind" program

    PubMed Central

    Martin, Angela; Sanderson, Kristy; Scott, Jenn; Brough, Paula

    2009-01-01

    Background Workplace mental health promotion (WMHP) aims to prevent and effectively manage the social and economic costs of common mental illnesses such as depression. The mental health of managers and employees within small-medium enterprises (SMEs) is a neglected sector in occupational health research and practice, despite the fact that this sector is the most common work setting in most economies. The availability and propensity of SME staff to attend face-to-face training/therapy or workshop style interventions often seen in corporate or public sector work settings is a widely recognised problem. The 'Business in Mind' program employs a DVD mode of delivery that is convenient for SME managers, particularly those operating in regional and remote areas where internet delivery may not be optimal. The objective of the intervention program is to improve the mental health of SME managers, and examine whether employees of managers' whose mental health improves, report positive change in their psychosocial work environment. The mechanisms via which we aim to improve managers' mental health are through the development of their psychological capital (a higher order construct comprised of hope, self efficacy, resilience and optimism) and their skills and capacities for coping with work stress. Methods/Design The effectiveness of two versions of the program (self administered and telephone facilitated) will be assessed using a randomised trial with an active control condition (psychoeducation only). We aim to recruit a minimum of 249 managers and a sample of their employees. This design allows for 83 managers per group, as power analyses showed that this number would allow for attrition of 20% and still enable detection of an effect size of 0.5. The intervention will be implemented over a three month period and postal surveys will assess managers and employees in each group at baseline, intervention completion, and at 6 month follow up. The intervention groups (managers

  7. Climatic Effects of Medium-Sized Asteroid Impacts on Land

    NASA Astrophysics Data System (ADS)

    Bardeen, C.; Garcia, R. R.; Toon, O. B.; Otto-Bliesner, B. L.; Wolf, E. T.

    2015-12-01

    Using the Community Earth System Model (CESM), a three-dimensional coupled climate model with interactive chemistry, we have simulated the climate response to a medium-sized (1 km) asteroid impact on the land. An impact of this size would cause local fires and may also generate submicron dust particles. Dust aerosols are injected into the upper atmosphere where they persist for ~3 years. Soot aerosols from fires are injected into the troposphere and absorb solar radiation heating the air which helps loft the soot into the stratosphere where it persists for ~10 years. Initially, these aerosols cause a heating of over 240 K in the stratosphere and up to a 70% reduction in downwelling solar radiation at the surface. Global average surface temperature cools by as much as -8.5 K, ocean temperature cools by -4.5 K, precipitation is reduced by 50%, and the ozone column is reduced by 55%. The surface UV Index exceeds 20 in the tropics for several years. These changes represent a significant hazard to life on a global scale. These results extend the work of Pierazzo et al. (2010), also using CESM, which found a significant impact on stratospheric ozone, but little change in surface temperature or precipitation, from a 1 km asteroid impact in the ocean.

  8. Rotational variability in medium and large sized TNOs

    NASA Astrophysics Data System (ADS)

    Lorenzi, Vania; Pinilla-Alonso, N.; Licandro, J.; Emery, J. P.; Dalle Ore, C. M.

    2013-10-01

    Trans-Neptunian objects (TNOs) are considered some of the most pristine objects in the Solar System. Their surfaces display a wide range of compositions, going from surfaces covered by dark irradiation mantels, to surfaces totally covered by ices. According to models of the retention of volatiles, only TNOs with a diameter d > 1000 km are expected to retain any of their original complement of volatile ices on their surface. However, surface refreshing processes on smaller bodies (e.g., collisions, transient atmospheres and cometary activity) could bring to the surface some amount of ices that are stable at depth. When these processes affect only part of the surface they cause surface heterogeneity. The study of rotational variability of medium and large sized TNOs is important to better understand the physical processes affecting their surfaces, and if these processes are local in scale or, on the contrary, extend across the whole surface. We present rotationally resolved spectroscopy of two TNOs, (20000) Varuna and (136472) Makemake. Varuna is a medium sized TNO ( 621 km). We observed Varuna with NICS@TNG telescope, in the NIR, covering two entire rotations of the object. The analysis of the data shows a homogeneous surface composed of a mixture of complex organics, silicates and water ice. Our data also indicate an upper limit of 10% of methane ice on the surface. The Dwarf Planet Makemake is also studied in this work. The surface of this large TNO shows that, similar to Pluto and Eris, it clearly retains large amounts of volatile ices. Moreover, thermal observations indicate that Makemake has a heterogeneous surface that could be the result of volatile migration. We present new visible spectra of Makemake, obtained with ISIS@WHT telescope, covering 80% of the surface. We present a detailed study of the differences in the absorption bands across the surface that are indicative of changes in the relative abundances of ices, temperature, and/or particle size

  9. The effect of gender and age differences on media selection in small and medium tourism enterprises.

    PubMed

    Dehkordi, Majid A; Zarei, Behrouz; Dehkordi, Shabnam A

    2008-12-01

    The purpose of this study is to examine the impact that gender and age differences have on the communication media selection within the context of small and medium tourism enterprises (SMEs). Media Richness Theory (MRT) was used to assess media preferences in the firms. Using a mail questionnaire, data from 78 firms were collected on seven popular media in use. Historical data of the firms, media characteristics, and other firm-specific factors were included in the analysis. The results indicated that there are substantial gender and age differences in term of communication media selection. This is consistent with MRT and highlights the importance of choosing the appropriate media in SMEs, according with the employee's behaviors, in order to achieve better outcomes and to smooth the path towards good performance in the future.

  10. 77 FR 55737 - Small Business Size Standards: Finance and Insurance and Management of Companies and Enterprises

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ...; ] SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG45 Small Business Size Standards: Finance and Insurance and Management of Companies and Enterprises AGENCY: U.S. Small Business Administration. ACTION... business status caused by a large number of varying receipts based size standards (see 69 FR 13130 (March...

  11. Overview of the EUROfusion Medium Size Tokamak program

    NASA Astrophysics Data System (ADS)

    Martin, Piero; Beurskens, Marc; Coda, Stefano; Eich, Thomas; Meyer, Hendrik; the EUROfusion MST1 Team

    2015-11-01

    As a result of the new organization of the European fusion programme, now under the umbrella of the EUROfusion Consortium, the MST (Medium Size Tokamaks) task force is in charge of executing the European science programme in the ASDEX Upgrade, TCV and MAST-U tokamaks. This paper will present an overview of the main results obtained in the 2014 campaign-where only ASDEX upgrade was operating-and the preliminary achievements of the recently started 2015/16 campaign, where also TCV will contribute. The main subjects of the experimental campaigns are (i) the development of scenarios relevant for the ITER Q=10 goal, in an all metal wall device (ii) the understanding of ELM mitigation/suppression with pellets and resonant magnetic perturbations, and in particular the effect of density versus collisionality, (iii) the understanding and optimization of methods for disruption mitigation or avoidance and runaway electrons control and (iv) the exploration of ITER and DEMO relevant scenarios with high normalized separatrix power flux, Psep / R , (Psep is the power through the separatrix, R the major radius) and tolerable target heat loads. The overview of the future programs in MST will be given. http://www.euro-fusionscipub.org/mst1

  12. Accurate thermochemistry for medium-sized and large molecules

    SciTech Connect

    Raghavachari, K.; Stefanov, B.B.; Curtiss, L.A.

    1997-12-31

    Accurate techniques such as Gaussian-2 (G2) theory have been proposed in recent years to evaluate the thermochemistry of small molecules from first-principles. However, as the molecules get larger, the errors in G2 theory and similar approaches tend to accumulate. For example, the computed heats of formation of benzene and naphthalene with G2 and G2(MP2) theories, respectively, have errors of 3.9 and 7.2 kcal/mol. In this work, we explore strategies for computing accurate heats of formation for medium-sized and large molecules. In our first scheme, G2 theory is combined with isodesmic bond separation reaction energies to yield accurate thermochemistry for larger molecules. For a test set of 40 molecules composed of H, C, O, and N, our method yields enthalpies of formation, {Delta}H{sub f}{sup 0}(298 K), with a mean absolute deviation from experiment of only 0.5 kcal/mol. This is an improvement of a factor of three over the deviation of 1.5 kcal/mol seen in standard G2 theory.

  13. Effectiveness of Government's Occupational Skills Development Strategies for Small- and Medium-Scale Enterprises: A Case Study of Korea

    ERIC Educational Resources Information Center

    Lee, Kye Woo

    2006-01-01

    In many developing countries, small- and medium-scale enterprises (SMEs) account for a large part of national employment and income. Therefore, governments have used various strategies/policy instruments to develop human resources for SMEs and improve their productivity and national welfare. In the literature, however, there has been little effort…

  14. Factors Influencing Information Communication Technology (ICT) Acceptance and Use in Small and Medium Enterprises (SMEs) in Kenya

    ERIC Educational Resources Information Center

    Nyandoro, Cephus K.

    2016-01-01

    Research demonstrates that there is a gap in focusing understanding factors of information communication technology (ICT) acceptance and use in small and medium enterprises (SMEs). ICT is gaining popularity because it is a force in the economic growth equation. SMEs adopt ICT to promote their business strategy, performance, and growth. This study…

  15. Employers' attitudes on hiring workers with intellectual disabilities in small and medium enterprises: an Italian research.

    PubMed

    Zappella, Emanuela

    2015-12-01

    Employers play a significant role in the process of hiring workers with intellectual disability. Through an in-depth interview, this research aims to investigate the attitudes of 30 representatives of small and medium-sized Italian companies involved in a process of recruitment. The data were analyzed using a phenomenological approach. The results show that attitudes toward the disabled employee are influenced by three areas, namely, personal characteristics of employers, selection process, and concerns and opinions of employers.

  16. Exploring Organizational Learning Mechanisms in Small-Size Business Enterprises

    ERIC Educational Resources Information Center

    Graham, Carroll M.; Nafukho, Fredrick M.

    2008-01-01

    The primary purpose of this study was to determine the importance of existing organizational learning mechanisms and establish the size and magnitude of the relationship among the organizational learning mechanisms. Of great import also was to determine whether statistically significant relationships existed among the organizational learning…

  17. Leadership and Organizational Learning: Accounting for Variances in Small-Size Business Enterprises

    ERIC Educational Resources Information Center

    Graham, Carroll M.; Nafukho, Fredrick M.

    2007-01-01

    This study's primary purpose was to determine the relationship between leadership and the dependent variable organizational learning readiness at three locations of a small-size business enterprise in the Mid-Western United States. Surveys were acquired within an exploratory correlational research design and the results indicated leadership…

  18. Sleep-related risk of occupational injuries in Japanese small and medium-scale enterprises.

    PubMed

    Nakata, Akinori; Ikeda, Tomoko; Takahashi, Masaya; Haratani, Takashi; Fujioka, Yosei; Fukui, Satoe; Swanson, Naomi G; Hojou, Minoru; Araki, Shunichi

    2005-01-01

    A cross-sectional study evaluated the contribution of daily sleep habits to occupational injuries. A self-administered questionnaire solicited answers about sleep, symptoms of depression, occupational injury, demographics, presence of diseases and lifestyle factors from 2,903 workers between the ages of 16-83 (mean 45) yr in small and medium-scale enterprises. Eight sleep habits were queried and dichotomized: 1) less or more than 6 hr of daily sleep, 2) taking more or less than 30 min to fall asleep (Difficulty initiating sleep; DIS), 3) awakening during sleep more or less than 3 times/wk (Difficulty maintaining sleep; DMS), 4) early morning awakening more or less than 3 times/wk (EMA), 5) definitely/somewhat difficulty waking up or not, 6) sleeping very poorly/not so well at night or not, 7) definitely/somewhat insufficient nightly sleep or not, and 8) difficulty in breathing during sleep more than once/week or less. Occupational injury was assessed by asking subjects 'Have you ever been injured during your work, including minor scratches and cuts (Yes/No)?' Both sleep and injury were assessed over the previous one year period. One-third of workers answered that they had experienced injury. Workers with sleep features of DIS, sleeping poorly at night, insufficient sleep, and insomnia had a significantly higher prevalence for injury after adjusting for multiple confounders. The findings suggest that poor nocturnal sleep habits are associated with self-reported occupational injury. PMID:15732310

  19. Development of Keropok Keping Drying Machine for Small & Medium Enterprises (SMEs)

    NASA Astrophysics Data System (ADS)

    Mohamaddan, S.; Mohd Mohtar, A. M. A. A.; Junaidi, N.; Mohtadzar, N. A. A.; Mohamad Suffian, M. S. Z.

    2016-02-01

    Keropok is a traditional cracker product in Southeast Asia. Keropok is made from fish, squid or shrimp mixed with starch or sago flour and eggs. In Malaysia, keropok industry is widely operated at the coastal areas where the fish/seafood supply can be easily accessed. Keropok need to be dried before the packaging process. At the moment, conventional method was used where the keropok is arranged under the sunlight on a board called pemidai. The method is considered less hygienic since it exposed to the dirt and dust and less practical especially during the raining season. This research is focusing on a new automation technique to solve the problems. Rotary drum with internal holder was developed as the drying machine. Keropok keping (types of keropok) was selected to be experimented using the machine with three different rotating speeds. Preliminary experiment result shows that the broken rate of the keropok keping was around 27% of the total weight. The development of new automation system is hoped to improve the small medium enterprises (SMEs) in Malaysia.

  20. A Study on the Models for Corporate Social Responsibility of Small and Medium Enterprises

    NASA Astrophysics Data System (ADS)

    Ma, Jun

    The role of small and medium enterprises (SMEs) in corporate social responsibility (CSR) has attracted increasing attention and interest in recent years. The purpose of this study is to build some relevant models of CSR which are the foundations of empirical study later. The paper begins by an overview of the CSR literature in the context of seven step model for CSR and differences between corporate and small businesses. Noting the general lack of theoretical framework in the literature, the paper then presents relevant theoretical models of CSR that could be useful in conducting further research on CSR and SMEs. The study is qualitative in nature, capitalizing on a comparative research design to highlight differences in CSR orientations between SMEs and MNCs. The research is presented and implications are drawn regarding the peculiar relational attributes of SMEs in the context of CSR generally, and developing countries more specifically, and how this inclination can be further nurtured and leveraged. Further research can seek to highlight how to leverage this natural affinity to CSR among SMEs detected in this study in pursuit of more systematic engagement and more benefits.

  1. [Current status of occupational health activities and the way that occupational health services should be offered to small- and medium-scale enterprises].

    PubMed

    Kayashima, Kotaro

    2013-10-01

    Activating occupational safety and health activities among Small- and Medium-scale Enterprises (SMEs) is a major issue because more than 80% of Japanese workers belong to these enterprises, in which the number of workers are less than 300 people. However, as the size of the enterprise decreases, the occurrence of problems of safety and health management systems and safety and health activities increases. Reasons for this include both the limitations of investments shortages of human resources. Occupational health services in SMEs has been provided by the cooperation of the following institutions: public associations (such as Regional Occupational Health Centers, Occupational Health Promotion Centers, Japan Industrial Safety and Health Association (JISHA)), occupational health agencies which provide checkup services, health insurance associations, and regional medical services. In contrast to the low coverage of occupational health services among SMEs in Japan, there are some countries in Europe in which this coverage is almost 100%. This is because of the development of occupational health services outside the company. To show the benefits of the safety and health activities to managers of SMEs, and to motivate them to take advantage of the services, it is important to consider measurements. Also, establishing systems that provide those services, improving the quality of specialists such as occupational physicians, and educating human resources, are all necessary.

  2. [Current status of occupational health activities and the way that occupational health services should be offered to small- and medium-scale enterprises].

    PubMed

    Kayashima, Kotaro

    2013-10-01

    Activating occupational safety and health activities among Small- and Medium-scale Enterprises (SMEs) is a major issue because more than 80% of Japanese workers belong to these enterprises, in which the number of workers are less than 300 people. However, as the size of the enterprise decreases, the occurrence of problems of safety and health management systems and safety and health activities increases. Reasons for this include both the limitations of investments shortages of human resources. Occupational health services in SMEs has been provided by the cooperation of the following institutions: public associations (such as Regional Occupational Health Centers, Occupational Health Promotion Centers, Japan Industrial Safety and Health Association (JISHA)), occupational health agencies which provide checkup services, health insurance associations, and regional medical services. In contrast to the low coverage of occupational health services among SMEs in Japan, there are some countries in Europe in which this coverage is almost 100%. This is because of the development of occupational health services outside the company. To show the benefits of the safety and health activities to managers of SMEs, and to motivate them to take advantage of the services, it is important to consider measurements. Also, establishing systems that provide those services, improving the quality of specialists such as occupational physicians, and educating human resources, are all necessary. PMID:24107334

  3. Engaging with economic evaluation methods: insights from small and medium enterprises in the UK medical devices industry after training workshops

    PubMed Central

    2012-01-01

    Background With increased governmental interest in value assessment of technologies and where medical device manufacturers are finding it increasingly necessary to become more familiar with economic evaluation methods, the study sought to explore the levels of health economics knowledge within small and medium-sized enterprises (SMEs) and to scope strategies they employ to demonstrate the value of their products to purchasers. Methods A short questionnaire was completed by participants attending one of five workshops on product development in the medical device sector that took place in England between 2007 and 2011. From all responses obtained, a large proportion of participants were based in SMEs (N = 43), and these responses were used for the analysis. Statistical analysis using non-parametric tests was performed on questions with approximately interval scales. Qualitative data from participant responses were analysed to reveal emerging themes. Results The questionnaire results revealed that 60% of SME participants (mostly company directors or managers, including product or project managers) rated themselves as having low or no knowledge of health economics prior to the workshops but the rest professed at least medium knowledge. Clinical trials and cost analyses or cost-effectiveness studies were the most highly cited means by which SMEs aim to demonstrate value of products to purchasers. Purchasers were perceived to place most importance on factors of safety, expert opinion, cost-effectiveness and price. However many companies did not utilise formal decision-making tools to prioritise these factors. There was no significant dependence of the use of decision-making tools in general with respect to professed knowledge of health economics methods. SMEs did not state a preference for any particular aspect of potential value when deciding whether to develop a product. A majority of SMEs stated they would use a health economics tool. Research and development

  4. JB-300: An advanced medium size transport for 2005

    NASA Technical Reports Server (NTRS)

    Debrouwer, Giles; Graham, Katherine; Ison, Jim; Juarez, Vince; Moskalik, Steve; Pankonin, Jon; Weinstein, Arnold

    1993-01-01

    In the fall of 1992, the TAC Team was presented with a Request for Proposal (PFP) for a mid-size (250-350 passenger) commercial transport. The aircraft was to be extremely competitive in the areas of passenger comfort, performance, and economic aspects. Through the use of supercritical airfoils, a technologically advanced Very High By-pass Ratio (VHBR) turbofan engine, a low overall drag configuration, a comparable interior layout, and mild use of composites, the JB-300 offers an economically viable choice to the airlines. The cents per passenger mile of the JB-300 is 1.76, which is considerably lower than current aircraft in the same range. Overall, the JB-300 is a technologically advanced aircraft, which will meet the demands of the 21st century.

  5. Dense medium radiative transfer theory for two scattering layers with a Rayleigh distribution of particle sizes

    SciTech Connect

    West, R.; Tsang, Leung; Winebrenner, D.P. )

    1993-03-01

    Dense medium radiative transfer theory is applied to a three-layer model consisting of two scattering layers overlying a homogeneous half space with a size distribution of particles in each layer. A model with a distribution of sizes gives quite different results than those obtained from a model with a single size. The size distribution is especially important in the low frequency limit when scattering is strongly dependent on particle size. The size distribution and absorption characteristics also affect the extinction behavior as a function of fractional volume. Theoretical results are also compared with experimental data. The sizes, permittivities, and densities used in the numerical illustrations are typical values for snow.

  6. An evaluation of HACCP implementation status in UK small and medium enterprises in food manufacturing.

    PubMed

    Fielding, L M; Ellis, L; Beveridge, C; Peters, A C

    2005-04-01

    To reduce foodborne illnesses, hazard and risk-based quality management systems are essential. Small and medium sized companies (SMEs) tend to have a poor understanding of such systems and limited adoption of the Hazard Analysis Critical Control Point system (HACCP). The requirement for full HACCP implementation by 2006 will place an even greater burden on these businesses. The aim of this project is to assess the current levels of understanding of hazards and risks in SMEs in the manufacturing sector. A questionnaire survey was made of 850 SMEs, including microbusinesses. This determined the industry sector and processes carried out, whether the company operated hazard-based quality management and the knowledge of the technical manager regarding the associated hazards and risks. Follow-up visits to the manufacturing plant observed the processes and the operatives to determine their level of understanding. A benchmarking audit was carried out and each company was rated. The results show that the majority of respondents stated that they operated hazard analysis-based quality management. The ability of the respondents to correctly define a hazard or risk or identify different types of hazard was, however, poor. There was no correlation between business type and audit score. The microbusinesses did, however, perform significantly less well than the larger SMEs.

  7. Special Issue: Stimulating Manufacturing Excellence in SMEs [Small and Medium Enterprises].

    ERIC Educational Resources Information Center

    Industry & Higher Education, 2000

    2000-01-01

    Includes "Introduction"; "Impact of Research on Manufacturing SMEs"; "Technology Acquisition and the Changing Face of Manufacturing Industry"; "Enabling Continuous Improvement of New Product Development Processes"; "Innovation and SMEs"; "A Decision Support System for the Initiation of Technological Innovation in Small Manufacturing Enterprises";…

  8. 40 CFR 141.81 - Applicability of corrosion control treatment steps to small, medium-size and large water systems.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... treatment steps to small, medium-size and large water systems. 141.81 Section 141.81 Protection of... to small, medium-size and large water systems. (a) Systems shall complete the applicable corrosion...) or (b)(3) of this section. (2) A small system (serving ≤3300 persons) and a medium-size...

  9. 40 CFR 428.60 - Applicability; description of the medium-sized general molded, extruded, and fabricated rubber...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... medium-sized general molded, extruded, and fabricated rubber plants subcategory. 428.60 Section 428.60... RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.60 Applicability; description of the medium-sized general molded, extruded,...

  10. 40 CFR 428.60 - Applicability; description of the medium-sized general molded, extruded, and fabricated rubber...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... medium-sized general molded, extruded, and fabricated rubber plants subcategory. 428.60 Section 428.60... (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.60 Applicability; description of the medium-sized general...

  11. 40 CFR 428.60 - Applicability; description of the medium-sized general molded, extruded, and fabricated rubber...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... medium-sized general molded, extruded, and fabricated rubber plants subcategory. 428.60 Section 428.60... (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.60 Applicability; description of the medium-sized general...

  12. 40 CFR 141.81 - Applicability of corrosion control treatment steps to small, medium-size and large water systems.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... treatment steps to small, medium-size and large water systems. 141.81 Section 141.81 Protection of... to small, medium-size and large water systems. (a) Systems shall complete the applicable corrosion...) or (b)(3) of this section. (2) A small system (serving ≤3300 persons) and a medium-size...

  13. 40 CFR 141.81 - Applicability of corrosion control treatment steps to small, medium-size and large water systems.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... treatment steps to small, medium-size and large water systems. 141.81 Section 141.81 Protection of... to small, medium-size and large water systems. (a) Systems shall complete the applicable corrosion...) or (b)(3) of this section. (2) A small system (serving ≤3300 persons) and a medium-size...

  14. 40 CFR 141.81 - Applicability of corrosion control treatment steps to small, medium-size and large water systems.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... treatment steps to small, medium-size and large water systems. 141.81 Section 141.81 Protection of... to small, medium-size and large water systems. (a) Systems shall complete the applicable corrosion...) or (b)(3) of this section. (2) A small system (serving ≤3300 persons) and a medium-size...

  15. 40 CFR 428.60 - Applicability; description of the medium-sized general molded, extruded, and fabricated rubber...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... medium-sized general molded, extruded, and fabricated rubber plants subcategory. 428.60 Section 428.60... RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.60 Applicability; description of the medium-sized general molded, extruded,...

  16. 40 CFR 141.81 - Applicability of corrosion control treatment steps to small, medium-size and large water systems.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... treatment steps to small, medium-size and large water systems. 141.81 Section 141.81 Protection of... to small, medium-size and large water systems. (a) Systems shall complete the applicable corrosion...) or (b)(3) of this section. (2) A small system (serving ≤3300 persons) and a medium-size...

  17. 40 CFR 428.60 - Applicability; description of the medium-sized general molded, extruded, and fabricated rubber...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... medium-sized general molded, extruded, and fabricated rubber plants subcategory. 428.60 Section 428.60... (CONTINUED) RUBBER MANUFACTURING POINT SOURCE CATEGORY Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.60 Applicability; description of the medium-sized general...

  18. Evaluating the Acceptance of Cloud-Based Productivity Computer Solutions in Small and Medium Enterprises

    ERIC Educational Resources Information Center

    Dominguez, Alfredo

    2013-01-01

    Cloud computing has emerged as a new paradigm for on-demand delivery and consumption of shared IT resources over the Internet. Research has predicted that small and medium organizations (SMEs) would be among the earliest adopters of cloud solutions; however, this projection has not materialized. This study set out to investigate if behavior…

  19. Current information technology needs of small to medium sized apparel manufacturers and contractors

    SciTech Connect

    Wipple, C.; Vosti, E.

    1997-11-01

    This report documents recent efforts of the American Textile Partnership (AMTEX) Demand Activated Manufacturing Architecture (DAMA) Project to address needs that are characterized of small to medium sized apparel manufactures and contractors. Background on the AMTEX/DAMA project and objectives for this specific efforts are discussed.

  20. Small and Medium-Sized Information Technology Firms: Assessment of Non-Local Partnership Facilitators

    ERIC Educational Resources Information Center

    Findikoglu, Melike Nur

    2012-01-01

    A two-phased qualitative study was conducted to explore the facilitators of non-local (i.e. domestic or international) partnerships formed by small- and medium-sized firms (SME). Rooted in trust, proximity and dynamic capabilities lenses, the study focused on behaviors of SMEs performing in dynamic, competitive and highly interlinked industry, the…

  1. Handbook of Reference Sources and Services for Small and Medium-Sized Libraries.

    ERIC Educational Resources Information Center

    Nichols, Margaret Irby

    This guide to adult reference works and services for the small or medium-sized public library is divided into two sections. Section One lists 559 numbered items arranged in 22 subsections, and 222 additional items in notes following entries or at the end of the relevant subsection. Subject areas are as follows: guides and bibliographies; general…

  2. Continuing Education for Managers from Small and Medium Sized German Companies.

    ERIC Educational Resources Information Center

    Fub, Jorg

    1995-01-01

    An international trade school in southern Germany, which is a highly export-oriented environment, has established a vocational and professional continuing education program for personnel of small- and medium-size companies. Offerings include a graduate course in international marketing, seminars for export companies, distance education in…

  3. Business Continuity Planning Resources for Small- and Medium-Sized Businesses

    SciTech Connect

    Judd, Kathleen S.; Lesperance, Ann M.

    2010-05-14

    This document/memo summarizes existing resources and guidance on business continuity planning for small- to medium-sized businesses. DTRA will share this information with large commercial businesses who identified the need to help their suppliers and other key collaborators prepare business continuity plans in order to speed recovery from a wide-area bioterrorism incident.

  4. Key Influencing Factors behind Moodle Adoption in Irish Small to Medium Sized Higher Education Colleges

    ERIC Educational Resources Information Center

    Walker, David; Livadas, Lelia; Miles, Gail

    2011-01-01

    This research investigated Irish Small to Medium Sized Educational Institutions (SMSEs) involved in Higher Education (HE) that adopted Moodle, the OSS (Open Source Software) course management system (CMS). As Moodle has only been adopted in the Irish HE sector in the last 5-7 years, this research crucially studied the attitudes of the SMSEs that…

  5. Toward a Singleton Undergraduate Computer Graphics Course in Small and Medium-Sized Colleges

    ERIC Educational Resources Information Center

    Shesh, Amit

    2013-01-01

    This article discusses the evolution of a single undergraduate computer graphics course over five semesters, driven by a primary question: if one could offer only one undergraduate course in graphics, what would it include? This constraint is relevant to many small and medium-sized colleges that lack resources, adequate expertise, and enrollment…

  6. Expectations, Realities, and Perceptions of Subject Specialist Librarians' Duties in Medium-Sized Academic Libraries

    ERIC Educational Resources Information Center

    McAbee, Sonja L.; Graham, John-Bauer

    2005-01-01

    This study surveys 138 librarians in 21 medium-sized academic libraries to identify time on tasks and value of tasks to address problems between the expectations of library administrators and the perceptions of librarians to their job descriptions. The results validate that the administration's expectations are within the norm.

  7. Measurement of Bubble Size Distribution Based on Acoustic Propagation in Bubbly Medium

    NASA Astrophysics Data System (ADS)

    Wu, Xiongjun; Hsiao, Chao-Tsung; Choi, Jin-Keun; Chahine, Georges

    2013-03-01

    Acoustic properties are strongly affected by bubble size distribution in a bubbly medium. Measurement of the acoustic transmission becomes increasingly difficulty as the void fraction of the bubbly medium increases due to strong attenuation, while acoustic reflection can be measured more easily with increasing void fraction. The ABS ACOUSTIC BUBBLE SPECTROMETER®\\copyright, an instrument for bubble size measurement that is under development tries to take full advantage of the properties of acoustic propagation in bubbly media to extract bubble size distribution. Properties of both acoustic transmission and reflection in the bubbly medium from a range of short single-frequency bursts of acoustic waves at different frequencies are measured in an effort to deduce the bubble size distribution. With the combination of both acoustic transmission and reflection, assisted with validations from photography, the ABS ACOUSTIC BUBBLE SPECTROMETER®\\copyright has the potential to measure bubble size distributions in a wider void fraction range. This work was sponsored by Department of Energy SBIR program

  8. Small- and Medium-Sized Commercial Building Monitoring and Controls Needs: A Scoping Study

    SciTech Connect

    Katipamula, Srinivas; Underhill, Ronald M.; Goddard, James K.; Taasevigen, Danny J.; Piette, M. A.; Granderson, J.; Brown, Rich E.; Lanzisera, Steven M.; Kuruganti, T.

    2012-10-31

    Buildings consume over 40% of the total energy consumption in the U.S. A significant portion of the energy consumed in buildings is wasted because of the lack of controls or the inability to use existing building automation systems (BASs) properly. Much of the waste occurs because of our inability to manage and controls buildings efficiently. Over 90% of the buildings are either small-size (<5,000 sf) or medium-size (between 5,000 sf and 50,000 sf); these buildings currently do not use BASs to monitor and control their building systems from a central location. According to Commercial Building Energy Consumption Survey (CBECS), about 10% of the buildings in the U.S. use BASs or central controls to manage their building system operations. Buildings that use BASs are typically large (>100,000 sf). Lawrence Berkeley National Laboratory (LBNL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) were asked by the U.S. Department of Energy’s (DOE’s) Building Technologies Program (BTP) to identify monitoring and control needs for small- and medium-sized commercial buildings and recommend possible solutions. This study documents the needs and solutions for small- and medium-sized buildings.

  9. Field observations of medium-sized debris from postburnout solid-fuel rocket motors

    NASA Astrophysics Data System (ADS)

    Bernstein, Marc D.; Sheeks, Benny J.

    1997-10-01

    Solid-fuel rocket motors are well recognized as a source of numerous small-sized (10 micrometer or less) debris that are ejected at high velocities during the propellant burning process. Medium-sized (1 mm to 10 cm), low velocity versions of these metallic oxide or other combustion chamber debris have also been reported from static ground tests of solid-fuel motors. Field observations of a third component of the debris generated by solid-fuel rocket motor operation are presented in this paper. These are medium-sized debris that are expelled at low velocities through the rocket motor nozzles after the nominal cessation of propellant burning. These post-burnout debris, referred to as chuffing debris, may be a significant component of the orbital debris environment. Radar and optical measurements of these debris have been collected during numerous sub-orbital flight tests conducted over the past several years. The large database of such observations that has now been accumulated indicates that such post-burnout debris are a generic consequence of solid-fuel rocket motor operation. Selected portions of this database are reviewed, and a preliminary model of such medium-sized debris production is presented that is suitable for correlation with existing orbital debris observations and population models.

  10. Factors Limiting the Proliferation of E-Learning within Small to Medium Sized Enterprises.

    ERIC Educational Resources Information Center

    Wood, Dan; Watson, Jason

    In today's cut-throat economic climate, companies have to look more than ever for new ways of operating efficiently. When a company looks for ways of reducing its fixed expenditure it is inevitable that long-term investments, such as the budget allocated for training, will come under scrutiny first. As companies become leaner, and budgets become…

  11. The Relation of Training Practices and Organizational Performance in Small and Medium Sized Enterprises.

    ERIC Educational Resources Information Center

    Huang, Tung-Chun

    2001-01-01

    A survey of 144 small businesses in Taiwan used a comprehensive measure of training including organization, expenditure, duration, process, and delivery methods. Findings show that firms with sophisticated training systems and strong management support for training are most successful at maximizing their training programs. (Contains 14…

  12. Distance Training for Management in Small and Medium-Sized Enterprises and Craft Undertakings in Spain.

    ERIC Educational Resources Information Center

    Sarromona, Jaime; Ferrer, Julia Ferran

    This document on Spain is one of a series of five published by the European Centre for the Development of Vocational Training. The document includes five chapters, three appendices, descriptive form sheets for five distance learning projects, and a summary. Chapter 1 provides the introduction to the report. Chapter 2 describes small and…

  13. Teaching Medium-Sized ERP Systems - A Problem-Based Learning Approach

    NASA Astrophysics Data System (ADS)

    Winkelmann, Axel; Matzner, Martin

    In order to increase the diversity in IS education, we discuss an approach for teaching medium-sized ERP systems in master courses. Many of today's IS curricula are biased toward large ERP packages. Nevertheless, these ERP systems are only a part of the ERP market. Hence, this chapter describes a course outline for a course on medium-sized ERP systems. Students had to study, analyze, and compare five different ERP systems during a semester. The chapter introduces a procedure model and scenario for setting up similar courses at other universities. Furthermore, it describes some of the students' outcomes and evaluates the contribution of the course with regard to a practical but also academic IS education.

  14. Asymmetric Synthesis of Medium-Sized Rings by Intramolecular Au(I)-Catalyzed Cyclopropanation

    PubMed Central

    Watson, Iain D. G.; Ritter, Stefanie; Toste, F. Dean

    2009-01-01

    An efficient method for the asymmetric gold(I)-catalyzed preparation of medium sized rings has been developed. The method provides 7- to 9-membered rings in excellent yield. High enantioselectivities can be achieved for 7- and 8-membered ring products employing chiral gold(I) complexes. The results provide insight into the mechanism, showing the fluxional nature of gold(I)-stabilized vinyl carbenoid intermediates. PMID:19161306

  15. On the graphical analysis of the electronic structure of ferromagnetic clusters of medium size.

    PubMed

    Collado, José Ramón Alvarez

    2004-12-01

    In a previous work, a theoretical approach, suitable to describe systems having a large number of fermions, was proposed, and results for ferromagnetic surface clusters of medium size (100-1000 atoms) were presented. The aim of the present contribution is to complete this previous work. Several significant theoretical and technical details, omitted previously, are provided here. The obtained spin orbitals are analyzed, by studying their symmetry, energy, and d contribution properties.

  16. Work Ability and Its Related Factors Among Workers in Small and Medium Enterprises: Comparison Among Four ASEAN Countries.

    PubMed

    Kaewboonchoo, Orawan; Isahak, Marzuki; Susilowati, Indri; Phuong, Toai Nguyen; Morioka, Ikuharu; Harncharoen, Kitiphong; Low, Wah Yun; Ratanasiripong, Paul

    2016-07-01

    Work ability is related to many factors that might influence one's capacity to work. This study aimed to examine the work ability and its related factors among small and medium enterprises (SME) workers in 4 Association of Southeast Asian Nations (ASEAN) countries. The participants in this study included 2098 workers from food and textile industries in Indonesia, Malaysia, Thailand, and Vietnam. A cross-sectional survey of anonymous self-administrated questionnaire was designed to collect information on sociodemographic factors, work environment and ergonomic condition, musculoskeletal disorders, and work ability. Bivariate correlation coefficient and multiple linear regression analyses were used to predict the work ability. Results of this study confirm that work ability in 4 ASEAN countries was similar to that in European countries, and that the sociodemographic factors, work environment and ergonomic condition, and musculoskeletal disorder (MSD) were associated with work ability. These factors are important for considering occupational health and safety policy to promote work ability in food, textile, and other SME workers. PMID:27273897

  17. Work Ability and Its Related Factors Among Workers in Small and Medium Enterprises: Comparison Among Four ASEAN Countries.

    PubMed

    Kaewboonchoo, Orawan; Isahak, Marzuki; Susilowati, Indri; Phuong, Toai Nguyen; Morioka, Ikuharu; Harncharoen, Kitiphong; Low, Wah Yun; Ratanasiripong, Paul

    2016-07-01

    Work ability is related to many factors that might influence one's capacity to work. This study aimed to examine the work ability and its related factors among small and medium enterprises (SME) workers in 4 Association of Southeast Asian Nations (ASEAN) countries. The participants in this study included 2098 workers from food and textile industries in Indonesia, Malaysia, Thailand, and Vietnam. A cross-sectional survey of anonymous self-administrated questionnaire was designed to collect information on sociodemographic factors, work environment and ergonomic condition, musculoskeletal disorders, and work ability. Bivariate correlation coefficient and multiple linear regression analyses were used to predict the work ability. Results of this study confirm that work ability in 4 ASEAN countries was similar to that in European countries, and that the sociodemographic factors, work environment and ergonomic condition, and musculoskeletal disorder (MSD) were associated with work ability. These factors are important for considering occupational health and safety policy to promote work ability in food, textile, and other SME workers.

  18. Prevalence of permanent hearing threshold shift among workers of Indian iron and steel small and medium enterprises: a study.

    PubMed

    Singh, Lakhwinder Pal; Bhardwaj, Arvind; Kumar, Deepak Kishore

    2012-01-01

    Occupational noise exposure and noise-induced hearing loss (NIHL) have been recognized as a problem among workers in Indian industries. The major industries in India are based on manufacturing. There are appreciable numbers of casting and forging units spread across the country. The objective of this study is to determine the prevalence of permanent hearing threshold shift among the workers engaged in Indian iron and steel small and medium enterprises (SMEs) and compared with control group subjects. As a part of hearing protection intervention, audiometric tests were conducted at low (250-1000 Hz), medium (1500-3000 Hz), and high (4000-8000 Hz) frequencies. The occurrence of hearing loss was determined based on hearing threshold levels with a low fence of 25 dB. Comparisons were made for hearing threshold at different frequencies between the exposed and control groups using Student's t test. ANOVA was used for the comparison of hearing threshold dB at different frequencies among occupation and year of experience. A P value <0.05 was considered as statistically significant. All data were presented as mean value (SD). Over 90% of workers engaged in various processes of casting and forging industry showed hearing loss in the noise-sensitive medium and higher frequencies. Occupation was significantly associated with NIHL, and hearing loss was particularly high among the workers of forging section. The analyses revealed a higher prevalence of significant hearing loss among the forging workers compared to the workers associated with other activities. The study shows alarming signals of NIHL, especially in forging workers. The occupational exposure to noise could be minimized by efficient control measures through engineering controls, administrative controls, and the use of personal protective devices. Applications of engineering and/or administrative controls are frequently not feasible in the developing countries for technical and financial reasons. A complete hearing

  19. Age-related decline in metabolic competence of small and medium-sized synaptic mitochondria

    NASA Astrophysics Data System (ADS)

    Bertoni-Freddari, Carlo; Fattoretti, Patrizia; Giorgetti, Belinda; Spazzafumo, Liana; Solazzi, Moreno; Balietti, Marta

    2005-02-01

    A computer-assisted morphometric investigation of cytochrome oxidase (COX) activity, selectively evidenced by preferential diaminobenzidine cytochemistry, has been carried out on synaptic mitochondria in the cerebellar cortex of adult and old rats. The ratio (R) of the area of the cytochemical precipitate (CPA) to the overall area of each mitochondrion (MA) was calculated. R refers to the fraction of the inner mitochondrial membrane actively involved in cellular respiration, thus its quantitative estimation constitutes a reliable index of the mitochondrial metabolic competence (MMC). In adult rats a significant negative correlation between MA and R values was found, while in old animals there was just a positive trend. Paired-quartile comparisons of R values showed a significant age-related decrease in small and medium-sized mitochondria, whereas the lowest and not significant age-related reduction was found in oversized organelles. A paired decrease in number and increase in size is reported to be a general trend for mitochondria during aging, but oversized organelles, according to their low R value, constitute a scanty, though functional, compensating reaction. Thus, the present findings support the argument that the currently reported age-related cellular metabolic decay appears to rely both on the decline in MMC of the small and medium-sized mitochondria, and on their specific reduction in number. This novel result is of biological relevance since it is largely the small and medium-sized mitochondria that are required for the provision of adequate amounts of ATP for actual cellular performance, while the significantly enlarged organelles are thought to represent an intermediate ultrastructural feature in mitochondrial genesis and/or remodelling.

  20. Prediction of Accurate Thermochemistry of Medium and Large Sized Radicals Using Connectivity-Based Hierarchy (CBH).

    PubMed

    Sengupta, Arkajyoti; Raghavachari, Krishnan

    2014-10-14

    Accurate modeling of the chemical reactions in many diverse areas such as combustion, photochemistry, or atmospheric chemistry strongly depends on the availability of thermochemical information of the radicals involved. However, accurate thermochemical investigations of radical systems using state of the art composite methods have mostly been restricted to the study of hydrocarbon radicals of modest size. In an alternative approach, systematic error-canceling thermochemical hierarchy of reaction schemes can be applied to yield accurate results for such systems. In this work, we have extended our connectivity-based hierarchy (CBH) method to the investigation of radical systems. We have calibrated our method using a test set of 30 medium sized radicals to evaluate their heats of formation. The CBH-rad30 test set contains radicals containing diverse functional groups as well as cyclic systems. We demonstrate that the sophisticated error-canceling isoatomic scheme (CBH-2) with modest levels of theory is adequate to provide heats of formation accurate to ∼1.5 kcal/mol. Finally, we predict heats of formation of 19 other large and medium sized radicals for which the accuracy of available heats of formation are less well-known. PMID:26588131

  1. Detection of Medium-Sized Polycyclic Aromatic Hydrocarbons via Fluorescence Energy Transfer

    PubMed Central

    Serio, Nicole; Prignano, Lindsey; Peters, Sean; Levine, Mindy

    2015-01-01

    Reported herein is the use of proximity-induced non-covalent energy transfer for the detection of medium-sized polycyclic aromatic hydrocarbons (PAHs). This energy transfer occurs within the cavity of γ-cyclodextrin in various aqueous environments, including human plasma and coconut water. Highly efficient energy transfer was observed, and the efficiency of the energy transfer is independent of the concentration of γ-cyclodextrin used, demonstrating the importance of hydrophobic binding in facilitating such energy transfer. Low limits of detection were also observed for many of the PAHs investigated, which is promising for the development of fluorescence-based detection schemes. PMID:25821390

  2. Psychological Distress, Related Work Attendance, and Productivity Loss in Small-to-Medium Enterprise Owner/Managers

    PubMed Central

    Cocker, Fiona; Martin, Angela; Scott, Jenn; Venn, Alison; Sanderson, Kristy

    2013-01-01

    Owner/managers of small-to-medium enterprises (SMEs) are an under-researched population in terms of psychological distress and the associated health and economic consequences. Using baseline data from the evaluation of the Business in Mind program, a mental health promotion intervention amongst SME owner/managers, this study investigated: (i) prevalence of high/very high psychological distress, past-month sickness absenteeism and presenteeism days in SME owner/managers; (ii) associated, self-reported lost productivity; and (iii) associations between work, non-work and business-specific factors and work attendance behaviours. In our sample of 217 SME owner/managers 36.8% reported high/very high psychological distress. Of this group 38.7% reported past-month absenteeism, 82.5% reported past-month presenteeism, and those reporting presenteeism were 50% less productive as than usual. Negative binomial regression was used to demonstrate the independent effects of socio-demographic, work-related wellbeing and health-related factors, as well as various individual and business characteristics on continuous measures of absenteeism and presenteeism days. Health-related factors (self-rated health and treatment) were the strongest correlates of higher presenteeism days (p < 0.05). Work-related wellbeing factors (job tension and job satisfaction) were the strongest correlates of higher absenteeism days (p < 0.05). Higher educational attainment, treatment and neuroticism were also correlated with more absenteeism days. SME-specific information about the occurrence of psychological distress, work attendance behaviour, and the variables that influence these decisions, are needed for the development of guidelines for managing psychological distress within this sector. PMID:24132134

  3. Psychological distress, related work attendance, and productivity loss in small-to-medium enterprise owner/managers.

    PubMed

    Cocker, Fiona; Martin, Angela; Scott, Jenn; Venn, Alison; Sanderson, Kristy

    2013-10-01

    Owner/managers of small-to-medium enterprises (SMEs) are an under-researched population in terms of psychological distress and the associated health and economic consequences. Using baseline data from the evaluation of the Business in Mind program, a mental health promotion intervention amongst SME owner/managers, this study investigated: (i) prevalence of high/very high psychological distress, past-month sickness absenteeism and presenteeism days in SME owner/managers; (ii) associated, self-reported lost productivity; and (iii) associations between work, non-work and business-specific factors and work attendance behaviours. In our sample of 217 SME owner/managers 36.8% reported high/very high psychological distress. Of this group 38.7% reported past-month absenteeism, 82.5% reported past-month presenteeism, and those reporting presenteeism were 50% less productive as than usual. Negative binomial regression was used to demonstrate the independent effects of socio-demographic, work-related wellbeing and health-related factors, as well as various individual and business characteristics on continuous measures of absenteeism and presenteeism days. Health-related factors (self-rated health and treatment) were the strongest correlates of higher presenteeism days (p < 0.05). Work-related wellbeing factors (job tension and job satisfaction) were the strongest correlates of higher absenteeism days (p < 0.05). Higher educational attainment, treatment and neuroticism were also correlated with more absenteeism days. SME-specific information about the occurrence of psychological distress, work attendance behaviour, and the variables that influence these decisions, are needed for the development of guidelines for managing psychological distress within this sector. PMID:24132134

  4. Search for global minimum geometries for medium sized germanium clusters: Ge12-Ge20

    NASA Astrophysics Data System (ADS)

    Bulusu, S.; Yoo, S.; Zeng, X. C.

    2005-04-01

    We have performed an unbiased search for the global minimum geometries of small-to-medium sized germanium clusters Gen(12⩽n⩽18) as well as a biased search (using seeding method) for Gen(17⩽n⩽20). We employed the basin-hopping algorithm coupled with the plane-wave pseudopotential density functional calculations. For each size, we started the unbiased search with using several structurally very different initial clusters, or we started the biased search with three different seeds. Irrespective of the initial structures of clusters we found that the obtained lowest-energy clusters of the size n =12-16 and 18 are the same. Among them, the predicted global minima of Gen(12⩽n⩽16) are identical to those reported previously [Shvartsburg et al., Phys. Rev. Lett. 83, 167 (1999)]. For n =17-20, we have identified two or three nearly isoenergetic low-lying isomers (for each size) that compete for the global minimum. Nearly all the low-lying clusters in the size range of 12⩽n⩽20 contain the tri-caped trigonal prism motif and are all prolate in geometry, in agreement with the experiment.

  5. Search for global minimum geometries for medium sized germanium clusters: Ge12-Ge20.

    PubMed

    Bulusu, S; Yoo, S; Zeng, X C

    2005-04-22

    We have performed an unbiased search for the global minimum geometries of small-to-medium sized germanium clusters Gen(12< or =n< or =18) as well as a biased search (using seeding method) for Gen(17< or =n< or =20). We employed the basin-hopping algorithm coupled with the plane-wave pseudopotential density functional calculations. For each size, we started the unbiased search with using several structurally very different initial clusters, or we started the biased search with three different seeds. Irrespective of the initial structures of clusters we found that the obtained lowest-energy clusters of the size n=12-16 and 18 are the same. Among them, the predicted global minima of Gen(12< or =n< or =16) are identical to those reported previously [Shvartsburg et al., Phys. Rev. Lett. 83, 167 (1999)]. For n=17-20, we have identified two or three nearly isoenergetic low-lying isomers (for each size) that compete for the global minimum. Nearly all the low-lying clusters in the size range of 12< or =n< or =20 contain the tri-caped trigonal prism motif and are all prolate in geometry, in agreement with the experiment.

  6. Tidal River Elbe - a sediment budget for the grain size fraction of medium sand

    NASA Astrophysics Data System (ADS)

    Winterscheid, Axel

    2016-04-01

    Human interventions have a historic and ongoing impact on estuarine sediment budgets across many estuaries worldwide. An early inference was the construction of embankments resulting in a constant loss of intertidal flats. Additionally, settlement activities and large scale land use changes in the upstream catchment areas had also an effect on sediment inflow rates. Today, the navigation channels in estuaries have been deepened for larger and more efficient vessels to reach a well-developed infrastructure of harbors and industrial areas often located far inland. In the past few years and just within the North-East Atlantic, the total annual amount of dredged sediments dumped at sea varied from 80 to 130 million tons (OSPAR Commission). In most estuaries across Europe the resulting human impact on the sediment fluxes and morphodynamics is significant. A good understanding of estuarine processes is essential for determining useful and meaningful measures to mitigate negative effects and to improve the current situation. Maintenance dredging and its environmental effects are therefore in the focus of public attention. Against this background, it is the aim of the presentation to identify and therefore to separate the particular effect that maintenance dredging has on sediment fluxes and budgets in the estuarine environment. Case study is the Tidal River Elbe in Germany, and here we set the focus on the grain size fraction of medium sand. In the past, river engineering measures forced the natural dynamics to form a concentrated stream flow along a fixed channel, except at a number of locations where side channels still exist. In addition to that, the main channel was deepened several times. The last deepening was in 1999/2000. The most significant deepening, however, took place from 1957 to 1962. Until then, an erosion-stable layer of marine clay (in German called "Klei") formed a flat bottom along most sections of the main channel. After removal of this layer of

  7. Optical bistability in plasmonic nanoparticles: Effect of size, shape and embedding medium

    NASA Astrophysics Data System (ADS)

    Daneshfar, Nader; Foroughi, Hamidreza

    2016-09-01

    We theoretically investigate the optical bistability, which one input signal allows two possible outputs, from single spherical/cylindrical nanoparticles and also nanoshells in the frame work of quasi-static formalism. It is shown that the bistability behavior greatly depends on several parameters such as the nanoparticle size, material and the surrounding dielectric environment. We demonstrated the width of the bistability region and also the bistable threshold depends on the geometrical parameters, and can be tuned by adjusting the size of nanoparticle, the shell thickness and the dielectric constant of the embedding medium. It is also shown that the optical bistable behavior depends strongly on the shape of plasmonic nanoparticles and nanoshells. However, these dependences of optical bistability of spherical/cylindrical nanoparticles and nanoshells on changing of their geometrical parameters can be used for realize optical switching and sensing purposes.

  8. Performance of a Medium-Size Area nGEM Detector for Neutron Beam Diagnostics

    NASA Astrophysics Data System (ADS)

    Croci, G.; Cazzaniga, C.; Albani, G.; Muraro, A.; Claps, G.; Cavenago, M.; Grosso, G.; Murtas, F.; Pasqualotto, R.; Cippo, E. Perelli; Rebai, M.; Tardocchi, M.; Gorini, G.

    Fast neutron detectors with a sub-centimetric space resolution are required in order to qualify neutron beams in applications related to magnetically-controlled nuclear fusion plasmas and to spallation sources. Based on the results obtained with small area prototypes, the first medium-size (20 x 35.2 cm2 active area) nGEM detector has been realized for both the CNESM diagnostic system of the SPIDER NBI prototype for ITER and as a beam monitor for fast neutrons beam lines at spallation sources, too. The nGEM is a Triple GEM gaseous detector equipped with polyethylene layers used to convert fast neutrons into recoil protons through the elastic scattering process. This paper describes the performance of the medium-size nGEM detector tested at the VESUVIO beam line of the ISIS spallation source. Being this detector the actual largest area fast neutron detector based on the GEM technology, particular attention was paid in the study of detector response in different points over the active area. Measurements of GEM counting rate (both as a function of VGEM and of time) and of the capability of the detector to reconstruct the beam in different positions are presented. This detector serves as a basis for the realization of an even larger area detector that will be used in the MITICA NBI prototype for ITER that represents the evolution of SPIDER.

  9. Detection of Clostridium difficile in small and medium-sized wild Mammals in Southern Ontario, Canada.

    PubMed

    Jardine, Claire M; Reid-Smith, Richard J; Rousseau, Joyce; Weese, J Scott

    2013-04-01

    We sampled 325 small and medium-sized wild mammals in Ontario, Canada in 2007 and 2010 to determine the prevalence and characteristics of Clostridium difficile in wild mammals living in proximity to captive wildlife and livestock. Clostridium difficile was isolated from five of 109 animals (4.6%) on four of 25 farms (16%), but was not isolated from any of the 216 samples from raccoons (Procyon lotor) living on the grounds of the Toronto Zoo. The positive animals included two raccoons from one beef farm, one raccoon from a different beef farm, one raccoon from a swine farm, and a shrew (Blarina brevicauda) from a dairy farm. None had evidence of gastrointestinal disease. Three of the five isolates were toxinotype variants (II, IV, and XIII) that are rarely identified in humans and domestic animals. The other two were toxinotype 0, a common toxinotype in humans and animals; however, all five isolates were of different ribotypes. None of the recovered ribotypes were recognized as ribotypes present in the authors' reference library of over 3,000 human and domestic animal C. difficile isolates. Neither the public health nor the animal health relevance of these findings is clear. It is not known whether C. difficile is a pathogen of small and medium-sized wild mammals, although the susceptibility of various laboratory species suggests it could cause disease. PMID:23568920

  10. An Investigation into University Extra-Curricular Enterprise Support Provision

    ERIC Educational Resources Information Center

    Preedy, Sarah; Jones, Paul

    2015-01-01

    Purpose: The employment market means students need to be equipped with wide-ranging enterprising skills and experience. With small- and medium-sized enterprises crucial to the health of the UK economy providing graduates with the skills to start-up their own business is also of increasing pertinence. The purpose of this paper is to analyse…

  11. Innovation Gateways for SMEs: Finding the Formula for Successful Interaction between Universities and Small and Medium-Size Firms.

    ERIC Educational Resources Information Center

    Davies, Peter T.

    1995-01-01

    The University of Warwick's Breakthrough Technologies program links with small and medium-sized businesses to stimulate awareness of innovations. The Manufacturing Excellence Initiative provides postgraduate training for company staff that focuses on best practices and change management. (SK)

  12. Perception toward Organizational Learning Culture in Small-Size Business Enterprises

    ERIC Educational Resources Information Center

    Graham, Carroll M.; Nafukho, Fredrick M.

    2007-01-01

    This study sought to determine the relationship between four independent variables educational level, longevity, gender, type of enterprise, and the dependent variable respondents' perception of culture toward organizational learning readiness. An exploratory correlational research design was employed to survey 498 employees in seven small…

  13. Commercial Internet Adoption in China: Comparing the Experience of Small, Medium and Large Businesses.

    ERIC Educational Resources Information Center

    Riquelme, Hernan

    2002-01-01

    Describes a study of small, medium, and large enterprises in Shanghai, China that investigated which size companies benefit the most from the Internet. Highlights include leveling the ground for small and medium enterprises (SMEs); increased sales and cost savings for large companies; and competitive advantages. (LRW)

  14. Medium-size power generation market now focus of Rolls-Royce

    SciTech Connect

    Mullins, P.

    1996-12-01

    John Rose, Rolls-Royce chief executive, explained that the focus in power generation would now be upon small- and medium-sized power applications up to 150MW using its ranges of aeroderivative gas turbines, small steam turbines and diesel engines. The company already has an established position in this area and expects to become more competitive as aeroderivative gas turbines like the marine WR21 and industrial Trent reach the market. A measure of Rolls-Royce`s broad capability in medium power generation can be seen in the company`s decision to build its own cogen power station to provide heat and power to its major aerospace manufacturing facilities at Derby in the U.K. Work has already started on preparing land adjoining the site and the 60 MW power station is scheduled to go on line in January 1998. The US$60 million project is being carried out by Derby Cogeneration, a joint venture between Rolls-Royce Power Ventures and National Power Cogen, a subsidiary of the U.K.`s largest electrical power generator. 5 figs.

  15. Modeling, simulation, and concept design for hybrid-electric medium-size military trucks

    NASA Astrophysics Data System (ADS)

    Rizzoni, Giorgio; Josephson, John R.; Soliman, Ahmed; Hubert, Christopher; Cantemir, Codrin-Gruie; Dembski, Nicholas; Pisu, Pierluigi; Mikesell, David; Serrao, Lorenzo; Russell, James; Carroll, Mark

    2005-05-01

    A large scale design space exploration can provide valuable insight into vehicle design tradeoffs being considered for the U.S. Army"s FMTV (Family of Medium Tactical Vehicles). Through a grant from TACOM (Tank-automotive and Armaments Command), researchers have generated detailed road, surface, and grade conditions representative of the performance criteria of this medium-sized truck and constructed a virtual powertrain simulator for both conventional and hybrid variants. The simulator incorporates the latest technology among vehicle design options, including scalable ultracapacitor and NiMH battery packs as well as a variety of generator and traction motor configurations. An energy management control strategy has also been developed to provide efficiency and performance. A design space exploration for the family of vehicles involves running a large number of simulations with systematically varied vehicle design parameters, where each variant is paced through several different mission profiles and multiple attributes of performance are measured. The resulting designs are filtered to remove dominated designs, exposing the multi-criterial surface of optimality (Pareto optimal designs), and revealing the design tradeoffs as they impact vehicle performance and economy. The results are not yet definitive because ride and drivability measures were not included, and work is not finished on fine-tuning the modeled dynamics of some powertrain components. However, the work so far completed demonstrates the effectiveness of the approach to design space exploration, and the results to date suggest the powertrain configuration best suited to the FMTV mission.

  16. Benchmarking Density Functionals on Structural Parameters of Small-/Medium-Sized Organic Molecules.

    PubMed

    Brémond, Éric; Savarese, Marika; Su, Neil Qiang; Pérez-Jiménez, Ángel José; Xu, Xin; Sancho-García, Juan Carlos; Adamo, Carlo

    2016-02-01

    In this Letter we report the error analysis of 59 exchange-correlation functionals in evaluating the structural parameters of small- and medium-sized organic molecules. From this analysis, recently developed double hybrids, such as xDH-PBE0, emerge as the most reliable methods, while global hybrids confirm their robustness in reproducing molecular structures. Notably the M06-L density functional is the only semilocal method reaching an accuracy comparable to hybrids'. A comparison with errors obtained on energetic databases (including thermochemistry, reaction barriers, and interaction energies) indicate that most of the functionals have a coherent behavior, showing low (or high) deviations on both energy and structure data sets. Only a few of them are more prone toward one of these two properties. PMID:26730741

  17. Software-Defined Solutions for Managing Energy Use in Small to Medium Sized Commercial Buildings

    SciTech Connect

    Peffer, Therese; Blumstein, Carl; Culler, David; Modera, Mark; Meier, Alan

    2015-09-10

    The Project uses state-of-the-art computer science to extend the benefits of Building Automation Systems (BAS) typically found in large buildings (>100,000 square foot) to medium-sized commercial buildings (<50,000 sq ft). The BAS developed in this project, termed OpenBAS, uses an open-source and open software architecture platform, user interface, and plug-and-play control devices to facilitate adoption of energy efficiency strategies in the commercial building sector throughout the United States. At the heart of this “turn key” BAS is the platform with three types of controllers—thermostat, lighting controller, and general controller—that are easily “discovered” by the platform in a plug-and-play fashion. The user interface showcases the platform and provides the control system set-up, system status display and means of automatically mapping the control points in the system.

  18. In-beam evaluation of a medium-size Resistive-Plate WELL gaseous particle detector

    NASA Astrophysics Data System (ADS)

    Moleri, L.; Amaro, F. D.; Arazi, L.; Azevedo, C. D. R.; Breskin, A.; Coimbra, A. E. C.; Oliveri, E.; Pereira, F. A.; Shaked Renous, D.; Schaarschmidt, J.; dos Santos, J. M. F.; Veloso, J. F. C. A.; Bressler, S.

    2016-09-01

    In-beam evaluation of a fully-equipped medium-size 30 × 30 cm2 Resistive Plate WELL (RPWELL) detector is presented. It consists here of a single element gas-avalanche multiplier with Semitron ESD225 resistive plate, 1 cm2 readout pads and APV25/SRS electronics. Similarly to previous results with small detector prototypes, stable operation at high detection efficiency (> 98%) and low average pad multiplicity (~ 1.2) were recorded with 150 GeV muon and high-rate pion beams, in Ne/(5%CH4), Ar/(5%CH4) and Ar/(7%CO2). This is an important step towards the realization of robust detectors suitable for applications requiring large-area coverage; among them Digital Hadron Calorimetry.

  19. Toward the construction of a medium size prototype Schwarzschild-Couder telescope for CTA

    NASA Astrophysics Data System (ADS)

    Rousselle, J.; Byrum, K.; Cameron, R.; Connaughton, V.; Errando, M.; Griffiths, S.; Guarino, V.; Humensky, T. B.; Jenke, P.; Kaaret, P.; Kieda, D.; Limon, M.; Mognet, I.; Mukherjee, R.; Nieto, D.; Okumura, A.; Peck, A.; Petrashyk, A.; Ribeiro, D.; Stevenson, B.; Vassiliev, V.; Yu, P.

    2015-09-01

    The construction of a prototype Schwarzschild-Couder telescope (pSCT) started in early June 2015 at the Fred Lawrence Whipple Observatory in Southern Arizona, as a candidate medium-sized telescope for the Cherenkov Telescope Array (CTA). Compared to current Davies-Cotton telescopes, this novel instrument with an aplanatic two-mirror optical system will offer a wider field-of-view and improved angular resolution. In addition, the reduced plate scale of the camera allows the use of highly-integrated photon detectors such as silicon photo multipliers. As part of CTA, this design has the potential to greatly improve the performance of the next generation ground-based observatory for very high-energy (E>60 GeV) gamma-ray astronomy. In this contribution we present the design and performance of both optical and alignment systems of the pSCT.

  20. Glass formability in medium-sized molecular systems/pharmaceuticals. I. Thermodynamics vs. kinetics.

    PubMed

    Tu, Wenkang; Li, Xiangqian; Chen, Zeming; Liu, Ying Dan; Labardi, Massimiliano; Capaccioli, Simone; Paluch, M; Wang, Li-Min

    2016-05-01

    Scrutinizing critical thermodynamic and kinetic factors for glass formation and the glass stability of materials would benefit the screening of the glass formers for the industry of glassy materials. The present work aims at elucidating the factors that contribute to the glass formation by investigating medium-sized molecules of pharmaceuticals. Glass transition related thermodynamics and kinetics are performed on the pharmaceuticals using calorimetric, dielectric, and viscosity measurements. The characteristic thermodynamic and kinetic parameters of glass transition are found to reproduce the relations established for small-molecule glass formers. The systematic comparison of the thermodynamic and kinetic contributions to glass formation reveals that the melting-point viscosity is the crucial quantity for the glass formation. Of more interest is the finding of a rough correlation between the melting-point viscosity and the entropy of fusion normalized by the number of beads of the pharmaceuticals, suggesting the thermodynamics can partly manifest its contribution to glass formation via kinetics. PMID:27155640

  1. Glass formability in medium-sized molecular systems/pharmaceuticals. I. Thermodynamics vs. kinetics

    NASA Astrophysics Data System (ADS)

    Tu, Wenkang; Li, Xiangqian; Chen, Zeming; Liu, Ying Dan; Labardi, Massimiliano; Capaccioli, Simone; Paluch, M.; Wang, Li-Min

    2016-05-01

    Scrutinizing critical thermodynamic and kinetic factors for glass formation and the glass stability of materials would benefit the screening of the glass formers for the industry of glassy materials. The present work aims at elucidating the factors that contribute to the glass formation by investigating medium-sized molecules of pharmaceuticals. Glass transition related thermodynamics and kinetics are performed on the pharmaceuticals using calorimetric, dielectric, and viscosity measurements. The characteristic thermodynamic and kinetic parameters of glass transition are found to reproduce the relations established for small-molecule glass formers. The systematic comparison of the thermodynamic and kinetic contributions to glass formation reveals that the melting-point viscosity is the crucial quantity for the glass formation. Of more interest is the finding of a rough correlation between the melting-point viscosity and the entropy of fusion normalized by the number of beads of the pharmaceuticals, suggesting the thermodynamics can partly manifest its contribution to glass formation via kinetics.

  2. Larval assemblages of large and medium-sized pelagic species in the Straits of Florida

    NASA Astrophysics Data System (ADS)

    Richardson, David E.; Llopiz, Joel K.; Guigand, Cedric M.; Cowen, Robert K.

    2010-07-01

    Critical gaps in our understanding of the distributions, interactions, life histories and preferred habitats of large and medium-size pelagic fishes severely constrain the implementation of ecosystem-based, spatially structured fisheries management approaches. In particular, spawning distributions and the environmental characteristics associated with the early life stages are poorly documented. In this study, we consider the diversity, assemblages, and associated habitat of the larvae of large and medium-sized pelagic species collected during 2 years of monthly surveys across the Straits of Florida. In total, 36 taxa and 14,295 individuals were collected, with the highest diversity occurring during the summer and in the western, frontal region of the Florida Current. Only a few species (e.g. Thunnus obesus, T. alalunga, Tetrapturus pfluegeri) considered for this study were absent. Small scombrids (e.g. T. atlanticus, Katsuwonus pelamis, Auxis spp.) and gempylids dominated the catch and were orders of magnitude more abundant than many of the rare species (e.g. Thunnus thynnus,Kajikia albida). Both constrained (CCA) and unconstrained (NMDS) multivariate analyses revealed a number of species groupings including: (1) a summer Florida edge assemblage (e.g. Auxis spp., Euthynnus alleterattus, Istiophorus platypterus); (2) a summer offshore assemblage (e.g. Makaira nigricans, T. atlanticus, Ruvettus pretiosus, Lampris guttatus); (3) an ubiquitous assemblage (e.g. K. pelamis, Coryphaena hippurus, Xiphias gladius); and (4) a spring/winter assemblage that was widely dispersed in space (e.g. trachipterids). The primary environmental factors associated with these assemblages were sea-surface temperature (highest in summer-early fall), day length (highest in early summer), thermocline depth (shallowest on the Florida side) and fluorescence (highest on the Florida side). Overall, the results of this study provide insights into how a remarkable diversity of pelagic species

  3. Survey of food safety practices on small to medium-sized farms and in farmers markets.

    PubMed

    Harrison, Judy A; Gaskin, Julia W; Harrison, Mark A; Cannon, Jennifer L; Boyer, Renee R; Zehnder, Geoffrey W

    2013-11-01

    As produce consumption has increased, so have foodborne disease outbreaks associated with fresh produce. Little research has addressed food safety practices used on small to medium-sized farms selling locally or in farmers markets. This study evaluated current food safety practices used by farmers on small to medium-sized farms and managers of farmers markets in Georgia, Virginia, and South Carolina based on responses to surveys. Surveys were developed, pretested, and revised before implementation with target audiences and were implemented via mail and the Web to maximize participation, with reminders sent to nonrespondents. Data were collected from 226 farmers and 45 market managers. Frequencies and percentages were calculated for all response variables. Responses from farmers indicated that more than 56% of them use manures. Of those who use manures, 34% use raw or mixtures of raw and composted manure, and over 26% wait fewer than 90 days between application of raw manure and harvest. Over 27% use water sources that have not been tested for safety for irrigation, and 16% use such water sources for washing produce. Over 43% do not sanitize surfaces that touch produce at the farm. Only 33% of farmers always clean transport containers between uses. Responses from market managers indicated that over 42% have no food safety standards in place for the market. Only 2 to 11% ask farmers specific questions about conditions on the farm that could affect product safety. Less than 25% of managers sanitize market surfaces. Only 11% always clean market containers between uses. Over 75% of markets offer no sanitation training to workers or vendors. While farmers and market managers are using many good practices, the results indicate that some practices being used may put consumers at risk of foodborne illness. Consequently, there is a need for training for both farmers and market managers.

  4. Tidal River Elbe - a sediment budget for the grain size fraction of medium sand

    NASA Astrophysics Data System (ADS)

    Winterscheid, Axel

    2016-04-01

    Human interventions have a historic and ongoing impact on estuarine sediment budgets across many estuaries worldwide. An early inference was the construction of embankments resulting in a constant loss of intertidal flats. Additionally, settlement activities and large scale land use changes in the upstream catchment areas had also an effect on sediment inflow rates. Today, the navigation channels in estuaries have been deepened for larger and more efficient vessels to reach a well-developed infrastructure of harbors and industrial areas often located far inland. In the past few years and just within the North-East Atlantic, the total annual amount of dredged sediments dumped at sea varied from 80 to 130 million tons (OSPAR Commission). In most estuaries across Europe the resulting human impact on the sediment fluxes and morphodynamics is significant. A good understanding of estuarine processes is essential for determining useful and meaningful measures to mitigate negative effects and to improve the current situation. Maintenance dredging and its environmental effects are therefore in the focus of public attention. Against this background, it is the aim of the presentation to identify and therefore to separate the particular effect that maintenance dredging has on sediment fluxes and budgets in the estuarine environment. Case study is the Tidal River Elbe in Germany, and here we set the focus on the grain size fraction of medium sand. In the past, river engineering measures forced the natural dynamics to form a concentrated stream flow along a fixed channel, except at a number of locations where side channels still exist. In addition to that, the main channel was deepened several times. The last deepening was in 1999/2000. The most significant deepening, however, took place from 1957 to 1962. Until then, an erosion-stable layer of marine clay (in German called "Klei") formed a flat bottom along most sections of the main channel. After removal of this layer of

  5. A comparison of workplace safety perceptions among financial decision-makers of medium- vs. large-size companies.

    PubMed

    Huang, Yueng-Hsiang; Leamon, Tom B; Courtney, Theodore K; Chen, Peter Y; DeArmond, Sarah

    2011-01-01

    This study, through a random national survey in the U.S., explored how corporate financial decision-makers perceive important workplace safety issues as a function of the size of the company for which they worked (medium- vs. large-size companies). Telephone surveys were conducted with 404 U.S. corporate financial decision-makers: 203 from medium-size companies and 201 from large companies. Results showed that the patterns of responding for participants from medium- and large-size companies were somewhat similar. The top-rated safety priorities in resource allocation reported by participants from both groups were overexertion, repetitive motion, and bodily reaction. They believed that there were direct and indirect costs associated with workplace injuries and for every dollar spent improving workplace safety, more than four dollars would be returned. They perceived the top benefits of an effective safety program to be predominately financial in nature - increased productivity and reduced costs - and the safety modification participants mentioned most often was to have more/better safety-focused training. However, more participants from large- than medium-size companies reported that "falling on the same level" was the major cause of workers' compensation loss, which is in line with industry loss data. Participants from large companies were more likely to see their safety programs as better than those of other companies in their industries, and those of medium-size companies were more likely to mention that there were no improvements needed for their companies.

  6. Evaluating the control software for CTA in a medium size telescope prototype

    NASA Astrophysics Data System (ADS)

    Oya, I.; Behera, B.; Birsin, E.; Koeppel, H.; Melkumyan, D.; Schmidt, T.; Schwanke, U.; Wegner, P.; Wiesand, S.; Winde, M.; Consortium, CTA

    2012-12-01

    CTA (Cherenkov Telescope Array) is one of the largest ground-based astronomy projects being pursued and will be the largest facility for ground-based γ-ray observations ever built. CTA will consist of two arrays (one in the Northern hemisphere and one in the Southern hemisphere) composed of telescopes of several sizes. A prototype for the Medium Size Telescope (MST) of a diameter of 12 m will be installed in Berlin by the end of 2012. This MST prototype will be composed of the mechanical structure, drive system and mirror facets mounted with powered actuators to enable active control. Five Charge-Coupled Device (CCD) cameras and a weather station will allow the measurement of the performance of the instrument. The Atacama Large Millimeter/submillimeter Array (ALMA) Common Software (ACS) distributed control framework is currently being considered by the CTA consortium to serve as the array control middleware. In order to evaluate the ACS software, it has been decided to implement an ACS-based readout and control system for the MST prototype. The design of the control software is following the concepts and tools under evaluation within the CTA consortium, like the use of a Unified Modeling Language (UML) based code generation framework for ACS component modeling, and the use of OPen Connectivity-Unified Architecture (OPC UA) for hardware access. In this contribution, the progress in the implementation of the control system for this CTA prototype telescope is described.

  7. Deep blank-field catalogue for medium- and large-sized telescopes

    NASA Astrophysics Data System (ADS)

    Jiménez Esteban, F. M.; Cabrera Lavers, A.; Cardiel, N.; Alacid, J. M.

    2012-11-01

    The observation of blank fields, defined as regions of the sky that are devoid of stars down to a given threshold magnitude, constitutes one of the most relevant calibration procedures required for the proper reduction of astronomical data obtained following typical observing strategies. In this work, we have used Delaunay triangulation to search for deep blank fields throughout the whole sky, with a minimum size of 10 arcmin in diameter and an increasing threshold magnitude from 15 to 18 in the R band of the USNO-B Catalog of the United States Naval Observatory. The result is a catalogue with the deepest blank fields known so far. A short sample of these regions has been tested with the 10.4-m Gran Telescopio Canarias, and it has been shown to be extremely useful for medium- and large-sized telescopes. Because some of the regions found could also be suitable for new extragalactic studies, we have estimated the galactic extinction in the direction of each deep blank field. This catalogue is accessible through the virtual observatory tool TESELA, and the user can retrieve - and visualize using ALADIN - the deep blank fields available near a given position in the sky.

  8. Extracting nuclear sizes of medium to heavy nuclei from total reaction cross sections

    NASA Astrophysics Data System (ADS)

    Horiuchi, W.; Hatakeyama, S.; Ebata, S.; Suzuki, Y.

    2016-04-01

    Background: Proton and neutron radii are fundamental quantities of atomic nuclei. To study the sizes of short-lived unstable nuclei, there is a need for an alternative to electron scattering. Purpose: The recent paper by Horiuchi et al. [Phys. Rev. C 89, 011601(R) (2014)], 10.1103/PhysRevC.89.011601 proposed a possible way of extracting the matter and neutron-skin thickness of light- to medium-mass nuclei using total reaction cross section, σR. The analysis is extended to medium to heavy nuclei up to lead isotopes with due attention to Coulomb breakup contributions as well as density distributions improved by paring correlation. Methods: We formulate a quantitative calculation of σR based on the Glauber model including the Coulomb breakup. To substantiate the treatment of the Coulomb breakup, we also evaluate the Coulomb breakup cross section due to the electric dipole field in a canonical-basis-time-dependent-Hartree-Fock-Bogoliubov theory in the three-dimensional coordinate space. Results: We analyze σR's of 103 nuclei with Z =20 , 28, 40, 50, 70, and 82 incident on light targets, H,21, 4He, and 12C. Three kinds of Skyrme interactions are tested to generate those wave functions. To discuss possible uncertainty due to the Coulomb breakup, we examine its dependence on the target, the incident energy, and the Skyrme interaction. The proton is a most promising target for extracting the nuclear sizes as the Coulomb excitation can safely be neglected. We find that the so-called reaction radius, aR=√{σR/π } , for the proton target is very well approximated by a linear function of two variables, the matter radius and the skin thickness, in which three constants depend only on the incident energy. We quantify the accuracy of σR measurements needed to extract the nuclear sizes. Conclusions: The proton is the best target because, once the incident energy is set, its aR is very accurately determined by only the matter radius and neutron-skin thickness. If σR's at

  9. Application of food safety management systems (ISO 22000/HACCP) in the Turkish poultry industry: a comparison based on enterprise size.

    PubMed

    Kök, M Samil

    2009-10-01

    The objectives of this study were to determine the extent of food safety management systems (ISO 22000/HACCP) implementation in the Turkish poultry industry. A survey was conducted with 25 major poultry meat producers, which account for close to 90% of national production, and a comparison was made between the procedures of small-to-medium enterprises (SMEs) and large firms (LFs). The survey revealed that there is a high level of application of ISO 22000 (72%), which is seen to aid the export market. LFs were shown to adopt more stringent schemes and make better use of governmental support services than SMEs. LFs were also more aware of, and able to deal with, risks from a greater range of contaminants.

  10. Comparison of microperc and mini-percutaneous nephrolithotomy for medium-sized lower calyx stones.

    PubMed

    Tok, Adem; Akbulut, Fatih; Buldu, Ibrahim; Karatag, Tuna; Kucuktopcu, Onur; Gurbuz, Gokhan; Istanbulluoglu, Okan; Armagan, Abdullah; Tepeler, Abdulkadir; Tasci, Ali Ihsan

    2016-04-01

    The objective of this study was to present the outcomes of comparative clinical study of microperc versus mini-percutaneous nephrolithotomy (mini-PNL) in the treatment of lower calyx stones of 10-20 mm. Patients with lower calyx stones treated with microperc (Group-1) or mini-PNL (Group-2) between 2011 and 2014 were retrospectively analyzed. Demographics of the patients were compared, including age, gender, BMI, stone size, laterality and procedural parameters (operation and fluoroscopy time), and outcomes (success and complication rates). A total of 98 patients were evaluated, assigned to Group-1 (n = 58) and to Group-2 (n = 40). Groups were statistically similar in terms of age, stone size, and BMI (p = 0.3, 0.07, 0.6, respectively). The mean procedure and fluoroscopy duration for Group-1 were 43.02 ± 27.98 min and 112.05 ± 72.5 s, and 52.25 ± 23.09 min and 138.53 ± 56.39 s in Group-2 (p = 0.006 and 0.006). The mean hematocrit drop was significantly higher in Group-2 compared to Group-1 (3.98 vs. 1.96%; p < 0.001); however, none of the cases required blood transfusion. Overall complication rates exhibited no statistically significant difference (p = 0.57). Stone-free status was similar (86.2 vs. 82.5%, p = 0.66). The tubeless procedure rate was significantly higher in Group-1 (p < 0.001). In Group-2, duration of hospitalization was significantly longer than in Group-1 (2.63 vs. 1.55 days; p < 0.01). Outcomes of the present retrospective study show that microperc is a treatment option for medium-sized lower calyx stone, being associated with lower blood loss, procedure, reduced fluoroscopy and hospitalization time, and a higher tubeless rate. PMID:26194110

  11. Think locally, act locally: Detection of small, medium-sized, and large communities in large networks

    NASA Astrophysics Data System (ADS)

    Jeub, Lucas G. S.; Balachandran, Prakash; Porter, Mason A.; Mucha, Peter J.; Mahoney, Michael W.

    2015-01-01

    It is common in the study of networks to investigate intermediate-sized (or "meso-scale") features to try to gain an understanding of network structure and function. For example, numerous algorithms have been developed to try to identify "communities," which are typically construed as sets of nodes with denser connections internally than with the remainder of a network. In this paper, we adopt a complementary perspective that communities are associated with bottlenecks of locally biased dynamical processes that begin at seed sets of nodes, and we employ several different community-identification procedures (using diffusion-based and geodesic-based dynamics) to investigate community quality as a function of community size. Using several empirical and synthetic networks, we identify several distinct scenarios for "size-resolved community structure" that can arise in real (and realistic) networks: (1) the best small groups of nodes can be better than the best large groups (for a given formulation of the idea of a good community); (2) the best small groups can have a quality that is comparable to the best medium-sized and large groups; and (3) the best small groups of nodes can be worse than the best large groups. As we discuss in detail, which of these three cases holds for a given network can make an enormous difference when investigating and making claims about network community structure, and it is important to take this into account to obtain reliable downstream conclusions. Depending on which scenario holds, one may or may not be able to successfully identify "good" communities in a given network (and good communities might not even exist for a given community quality measure), the manner in which different small communities fit together to form meso-scale network structures can be very different, and processes such as viral propagation and information diffusion can exhibit very different dynamics. In addition, our results suggest that, for many large realistic

  12. A survey of occupational exposure to inhalable wood dust among workers in small- and medium-scale wood-processing enterprises in Ethiopia.

    PubMed

    Ayalew, Eyasu; Gebre, Yonas; De Wael, Karolien

    2015-03-01

    A study of wood dust exposure in 20 small- and medium-scale wood-processing enterprises was performed in Ethiopia. Sampling was conducted daily from January to June, 2013 and a total of 360 samples from 113 workers were collected with Institute of Occupational Medicine (IOM) personal samplers. Eight-hour time-weighted average exposure to wood dust ranged from 0.24 to 23.3mg m(-3) with a geometric mean (GM) of 6.82mg m(-3) and a geometric standard deviation of 1.82. Although Ethiopia did not have any defined standard of Occupational Exposure Limit for wood dust exposure, 71% of the measurements exceeded the limit of 5mg m(-3) set by the European Union (EU). Higher than the EU exposure limit was measured while workers perform sanding and sawing activities with a GM of 9.72 and 7.60mg m(-3), respectively. In conclusion, wood workers in the small- and medium-scale enterprises are at a higher risk of developing different respiratory health problems with continuous exposure trends.

  13. A survey of occupational exposure to inhalable wood dust among workers in small- and medium-scale wood-processing enterprises in Ethiopia.

    PubMed

    Ayalew, Eyasu; Gebre, Yonas; De Wael, Karolien

    2015-03-01

    A study of wood dust exposure in 20 small- and medium-scale wood-processing enterprises was performed in Ethiopia. Sampling was conducted daily from January to June, 2013 and a total of 360 samples from 113 workers were collected with Institute of Occupational Medicine (IOM) personal samplers. Eight-hour time-weighted average exposure to wood dust ranged from 0.24 to 23.3mg m(-3) with a geometric mean (GM) of 6.82mg m(-3) and a geometric standard deviation of 1.82. Although Ethiopia did not have any defined standard of Occupational Exposure Limit for wood dust exposure, 71% of the measurements exceeded the limit of 5mg m(-3) set by the European Union (EU). Higher than the EU exposure limit was measured while workers perform sanding and sawing activities with a GM of 9.72 and 7.60mg m(-3), respectively. In conclusion, wood workers in the small- and medium-scale enterprises are at a higher risk of developing different respiratory health problems with continuous exposure trends. PMID:25349370

  14. Ixodes dammini (Acari: Ixodidae) infestation on medium-sized mammals and blue jays in northwestern Illinois.

    PubMed

    Mannelli, A; Kitron, U; Jones, C J; Slajchert, T L

    1993-09-01

    High prevalence of infestation of five species of medium-sized mammals and blue jays, Cyanocitta cristata (L.), by immature Ixodes dammini Spielman, Clifford, Piesman and Corwin was found in Castle Rock State Park in northwestern Illinois during May-August 1991. Raccoons, Procyon lotor L., and opossums, Didelphis virginiana Kerr, were infested with the highest larval densities and were trapped primarily in bottomland forest and ecotone habitats. All species had similar nymphal densities, except the eastern cottontails, Sylvilagus floridanus Allen, which were infested with fewer nymphs. Infestation by I. dammini is reported for the first time for fox squirrels, Sciurus niger E. G. St. Hilaire, and for the first time in the midwestern United States for blue jays, C. cristata. These two species were hosts for nymphs in upland forest habitat. Molting rates varied among ticks that fed on different host species and among larvae that fed on individuals of the same species. Molting rate is proposed as an important factor in determining the relative importance of a host species to I. dammini population dynamics. PMID:8254647

  15. Diode laser anastemoses of medium-size arteries with indocyanine green dye-enhanced albumine

    NASA Astrophysics Data System (ADS)

    Weng, Guo-Xing; Williamson, Warren; Aretz, H. Thomas

    1998-11-01

    In order to achieve a better long-term patency result and solve the problem of tensile strength in laser artery anastomoses, diode laser and Indocyanine Green (ICG) enhanced albumin were applied to medium-size artery anastomoses with three different methods, that is, direct laser vascular anastomoses, direct method enforced with ICG albumin, and laser welding with ICG albumin as 'solder'. Internal mammary artery (IMA) harvested from patients undergoing coronary bypass procedures, in vivo rat abdominal artery, and in vitro swine heart and IMA were chosen as the experimental materials. The results revealed that only 3.15 +/- 0.36 minutes were required for each anastomosis; the bursting pressure and tensile strength were greater in the groups enforced with ICG albumin and laser welding than that with direct laser anastomoses. In the laser soldering group, the thermal damage was limited in the adventitial layer, only at a depth of 200 micrometers . There was also a satisfied result in the in vivo laser welding rat's abdominal adventitial layer, only at a depth of 200 micrometers . There was also a satisfied result in the in vivo laser welding rat's abdominal arteries. However, end-to-side laser welding of IMA soronary artery with ICG albumin needs further investigation about its tensile strength in an in vivo model.

  16. Signaling from the Cytoplasm to the Nucleus in Striatal Medium-Sized Spiny Neurons

    PubMed Central

    Matamales, Miriam; Girault, Jean-Antoine

    2011-01-01

    Striatal medium-sized spiny neurons (MSNs) receive massive glutamate inputs from the cerebral cortex and thalamus and are a major target of dopamine projections. Interaction between glutamate and dopamine signaling is crucial for the control of movement and reward-driven learning, and its alterations are implicated in several neuropsychiatric disorders including Parkinson’s disease and drug addiction. Long-lasting forms of synaptic plasticity are thought to depend on transcription of gene products that alter the structure and/or function of neurons. Although multiple signal transduction pathways regulate transcription, little is known about signal transmission between the cytoplasm and the nucleus of striatal neurons and its regulation. Here we review the current knowledge of the signaling cascades that target the nucleus of MSNs, most of which are activated by cAMP and/or Ca2+. We outline the mechanisms by which signals originating at the plasma membrane and amplified in the cytoplasm are relayed to the nucleus, through the regulation of several protein kinases and phosphatases and transport through the nuclear pore. We also summarize the identified mechanisms of transcription regulation and chromatin remodeling in MSNs that appear to be important for behavioral adaptations, and discuss their relationships with epigenetic regulation. PMID:21779236

  17. Mousso structure: A deeply eroded, medium-sized, complex impact crater in northern Chad?

    NASA Astrophysics Data System (ADS)

    Buchner, Elmar; Schmieder, Martin

    2007-10-01

    The Mousso structure, a complex, ˜3.8 km circular structure centred on 17°58' N/19°53' E and located near the Mousso oasis, Borkou-Ennedi-Tibesti, northern Chad, displays structural features typical for complex impact structures: a circular rim with concentric faults, an annular basin, and a central peak. Remote sensing investigations based on Landsat-7 Enhanced Thematic Mapper Plus (ETM+) and Shuttle Radar Topographic Mission (SRTM) data reveal a specific morphological-structural resemblance of the complex central peak of the Mousso structure to the central uplift of the Spider impact structure, Western Australia, and, to some degree, to the central uplifts of the Upheaval Dome, Sierra Madera, and Gosses Bluff impact structures. This is consistent with the layered sedimentary rocks associated with all of these structures. No endogenic geological processes such as magmatism, diapirism, karst dissolution, and glacial or fluvial erosion can conclusively explain the formation of the Mousso structure within a large area of flat-lying early Paleozoic sandstones. Thus, this paper proposes that the Mousso structure might represent a deeply eroded, medium-sized, complex impact structure. As field investigations are currently impossible due to the civil war in Chad, the search for shock-metamorphic effects in rocks of the Mousso structure remains outstanding.

  18. Continuous improvement of the quality reporting system of a medium-size company

    NASA Astrophysics Data System (ADS)

    Hawkins, Anthony; Onuh, Spencer

    2001-10-01

    Many companies are faced with quality improvement issues on a daily basis but their response to this problem varies. This paper discusses the improvement in the defect reporting system at a medium sized manufacturing company following the appointment of an experienced, motivated, design engineer to be dedicated to that task. It sets out the situation that the engineer inherited and details the changes that were incorporated; it assesses which were successful and which failed. Following a survey of current literature, it was seen that there is little written specifically on the subject of audited defect reporting. It is felt that this study goes some way to filling that void. A successful survey of engineering companies in Southern Hampshire reinforces the principle findings, that the emphasising of the Check part of Demming's Plan-Do-Check-Act cycle is a novel approach to the Quality Improvement Process, and that it has reduced the cost of rework by an audited 80% in a period of two years.

  19. FastCam: a new lucky imaging instrument for medium-sized telescopes

    NASA Astrophysics Data System (ADS)

    Oscoz, Alejandro; Rebolo, Rafael; López, Roberto; Pérez-Garrido, Antonio; Pérez, Jorge Andrés; Hildebrandt, Sergi; Rodríguez, Luis Fernando; Piqueras, Juan José; Villó, Isidro; González, José Miguel; Barrena, Rafael; Gómez, Gabriel; García-Hernández, D. Aníbal; Montañés, Pilar; Rosenberg, Alfred; Cadavid, Emilio; Calcines, Ariadna; Díaz-Sánchez, Anastasio; Kohley, Ralf; Martín, Yolanda; Peñate, José; Sánchez, Vicente

    2008-07-01

    FastCam is an instrument jointly developed by the Spanish Instituto de Astrofísica de Canarias and the Universidad Politécnica de Cartagena designed to obtain high spatial resolution images in the optical wavelength range from ground-based telescopes. The instrument consists of a very low noise and very fast readout speed EMCCD camera capable of reaching the diffraction limit of medium-sized telescopes from 500 to 850 nm. FastCam incorporates a FPGAs-based device to save and evaluate those images minimally disturbed by atmospheric turbulence in real time. The undisturbed images represent a small fraction of the observations. Therefore, a special software package has been developed to extract, from cubes of tens of thousands of images, those with better quality than a given level. This is done in parallel with the data acquisition at the telescope. After the first tests in the laboratory, FastCam has been successfully tested in three telescopes: the 1.52-meter TCS (Teide Observatory), the 2.5-meter NOT, and the 4.2-meter WHT (Roque de los Muchachos Observatory). The theoretical diffraction limit of each telescope has been reached in the I band (850 nm) -0.15, 0.08 and 0.05 arcsec, respectively-, and similar resolutions have been also obtained in the V and R bands. Future work will include the development of a new instrument for the 10.4-meter GTC telescope on La Palma.

  20. Feasibility of a medium-size central cogenerated energy facility, energy management memorandum

    NASA Astrophysics Data System (ADS)

    Porter, R. W.

    1982-09-01

    The thermal-economic feasibility was studied of a medium-size central cogenerated energy facility designed to serve five varied industries. Generation options included one dual-fuel diesel and one gas turbine, both with waste heat boilers, and five fired boilers. Fuels included natural gas, and for the fired-boiler cases, also low-sulphur coal and municipal refuse. The fired-boiler cogeneration systems employed back-pressure steam turbines. For coal and refuse, the option of steam only without cogeneration was also assessed. The refuse-fired cases utilized modular incinerators. The options provided for a wide range of steam and electrical capacities. Deficient steam was assumed generated independently in existing equipment. Excess electrical power over that which could be displaced was assumed sold to Commonwealth Edison Company under PURPA (Public Utility Regulator Policies Act). The facility was assumed operated by a mutually owned corporation formed by the cogenerated power users. The economic analysis was predicted on currently applicable energy-investment tax credits and accelerated depreciation for a January 1985 startup date. Based on 100% equity financing, the results indicated that the best alternative was the modular-incinerator cogeneration system.

  1. TELICS—A Telescope Instrument Control System for Small/Medium Sized Astronomical Observatories

    NASA Astrophysics Data System (ADS)

    Srivastava, Mudit K.; Ramaprakash, A. N.; Burse, Mahesh P.; Chordia, Pravin A.; Chillal, Kalpesh S.; Mestry, Vilas B.; Das, Hillol K.; Kohok, Abhay A.

    2009-10-01

    For any modern astronomical observatory, it is essential to have an efficient interface between the telescope and its back-end instruments. However, for small and medium-sized observatories, this requirement is often limited by tight financial constraints. Therefore a simple yet versatile and low-cost control system is required for such observatories to minimize cost and effort. Here we report the development of a modern, multipurpose instrument control system TELICS (Telescope Instrument Control System) to integrate the controls of various instruments and devices mounted on the telescope. TELICS consists of an embedded hardware unit known as a common control unit (CCU) in combination with Linux-based data acquisition and user interface. The hardware of the CCU is built around the ATmega 128 microcontroller (Atmel Corp.) and is designed with a backplane, master-slave architecture. A Qt-based graphical user interface (GUI) has been developed and the back-end application software is based on C/C++. TELICS provides feedback mechanisms that give the operator good visibility and a quick-look display of the status and modes of instruments as well as data. TELICS has been used for regular science observations since 2008 March on the 2 m, f/10 IUCAA Telescope located at Girawali in Pune, India.

  2. Energy conserved and costs saved by small and medium-size manufacturers, 1988--1989

    SciTech Connect

    Kirsch, F.W.

    1991-05-01

    Energy Analysis and Diagnostic Centers (EADCs) provided energy-conserving and cost saving assistance in 339 small and medium-size manufacturing plants nationwide during 1988-89. This report presents the results of what was recommended to those manufacturers, the record of what was implemented by them, and an analysis of the financial rewards gained by them. It also includes an accounting of the financial returns to the federal government, derived from taxes upon the cost savings, or incremental income, of the manufacturers who implement the EADCs` recommendations. EADCs collect implementation data within a year of the energy audit, and for these results that time period extended through 1990. The EADCs are located at accredited engineering departments of universities and staffed by faculty and students. At present there are 18 EADCs serving manufacturers in 37 states; of these, two were established as a result of the 1989 competition, and five more were chosen competitively in 1990. Most of the results in this report were generated by 11 EADCs (named in the Appendix); two others withdrew voluntarily after completing only 10 energy audits during 1988-89. Primary responsibility for selecting, training, evaluating, and managing the EADCs belongs to the Industrial Technology and Energy Management (ITEM) division of University City Science Center (UCSC). The Department of Energy`s Office of Industrial Technologies sponsors the EADC program through an agreement with UCSC.

  3. The spatiotemporal trajectory of a dengue epidemic in a medium-sized city.

    PubMed

    Morato, Daniela G; Barreto, Florisneide R; Braga, José U; Natividade, Marcio S; Costa, Maria da Conceição N; Morato, Vanessa; Teixeira, Maria da Glória Lima Cruz

    2015-06-01

    Understanding the transmission dynamics of infectious diseases is important to allow for improvements of control measures. To investigate the spatiotemporal pattern of an epidemic dengue occurred at a medium-sized city in the Northeast Region of Brazil in 2009, we conducted an ecological study of the notified dengue cases georeferenced according to epidemiological week (EW) and home address. Kernel density estimation and space-time interaction were analysed using the Knox method. The evolution of the epidemic was analysed using an animated projection technique. The dengue incidence was 6.918.7/100,000 inhabitants; the peak of the epidemic occurred from 8 February-1 March, EWs 6-9 (828.7/100,000 inhabitants). There were cases throughout the city and was identified space-time interaction. Three epicenters were responsible for spreading the disease in an expansion and relocation diffusion pattern. If the health services could detect in real time the epicenters and apply nimbly control measures, may possibly reduce the magnitude of dengue epidemics. PMID:26061236

  4. Understanding the structural transformation, stability of medium-sized neutral and charged silicon clusters

    PubMed Central

    Ding, Li Ping; Zhang, Fang Hui; Zhu, Yong Sheng; Lu, Cheng; Kuang, Xiao Yu; Lv, Jian; Shao, Peng

    2015-01-01

    The structural and electronic properties for the global minimum structures of medium-sized neutral, anionic and cationic Sinμ (n = 20–30, μ = 0, −1 and +1) clusters have been studied using an unbiased CALYPSO structure searching method in conjunction with first-principles calculations. A large number of low-lying isomers are optimized at the B3PW91/6-311 + G* level of theory. Harmonic vibrational analysis has been performed to assure that the optimized geometries are stable. The growth behaviors clearly indicate that a structural transition from the prolate to spherical-like geometries occurs at n = 26 for neutral silicon clusters, n = 27 for anions and n = 25 for cations. These results are in good agreement with the available experimental and theoretical predicted findings. In addition, no significant structural differences are observed between the neutral and cation charged silicon clusters with n = 20–24, both of them favor prolate structures. The HOMO-LUMO gaps and vertical ionization potential patterns indicate that Si22 is the most chemical stable cluster, and its dynamical stability is deeply discussed by the vibrational spectra calculations. PMID:26526519

  5. Use of the helium medium for preparation of nano-sized powder materials by the example of industrial cement

    NASA Astrophysics Data System (ADS)

    Klyavin, O. V.; Aruev, N. N.; Boltenkov, B. S.; Pozdnyakov, A. O.; Chernov, Yu. M.; Shpeizman, V. V.

    2014-02-01

    Based on the phenomenon of the mechanodynamic diffusion of particles of the external medium in solids, a new in principle method has been proposed for the first time for producing nano-sized powder materials using industrial cement milled in a helium medium as an example. The temperature dependences of the extraction rate and the amount of helium in powders upon their heating in a temperature range of 20-1200°C have been obtained using mass spectrometry. It has been shown that milling of the cement powder of the M-400 brand using an MK-1 laboratory mill in helium leads to a considerable shift of its extraction curve towards lower temperatures compared with the air medium. The particle sizes of the powder milled in helium lie in a range of 5-10 nm, which is smaller than the powder size (˜500 nm) after milling in the air medium by a factor of 100. The compression strength of cement samples obtained from the powders milled in helium increased by a factor of 2 compared with the strength of the samples from the initial material. The activation energies of helium extraction from the cement powders milled in helium and in air have been analyzed. The obtained results indicate a high efficiency of the method for producing nano-sized powder materials in the helium medium. The method can be used in the industrial scale based on the existing mill equipment with its minimal modernization.

  6. A Comprehensive, Competency-Based Education Framework Using Medium-Sized ERP Systems

    ERIC Educational Resources Information Center

    Scholtz, Brenda; Cilliers, Charmain; Calitz, Andre

    2012-01-01

    Graduates with industry-relevant ERP competencies are highly sought after. This requirement is due to a dominance of Enterprise Resource Planning (ERP) systems and the positive affect which good quality ERP specialists have on the success rate of ERP system implementation projects. Universities are therefore increasingly pressurised to supply…

  7. Methotrexate and etanercept-induced primary cutaneous CD4 positive small/medium-sized pleomorphic T-cell lymphoma*

    PubMed Central

    MA, Han; Qiu, Shu; Lu, Rongbiao; Feng, Peiying; Lu, Chun

    2016-01-01

    Immunosuppressive drugs and biological agents may represent a potential risk of lymphoma development in patients with rheumatoid arthritis. But most cases are diffuse, large B-cell lymphomas. Primary cutaneous CD4+ small/medium-sized pleomorphic T-cell lymphoma, a provisional entity in the 2005 WHO-EORTC classification of cutaneous lymphomas, is only described in a limited number of reports. To our knowledge, our case is a rare instance of primary cutaneous CD4+ small/medium-sized pleomorphic T-cell lymphoma, after associated treatment with methotrexate and etanercept, in a patient with moderate rheumatoid arthritis who had undergone an orchidectomy incorrectly. PMID:27438209

  8. Methotrexate and etanercept-induced primary cutaneous CD4 positive small/medium-sized pleomorphic T-cell lymphoma.

    PubMed

    Ma, Han; Qiu, Shu; Lu, Rongbiao; Feng, Peiying; Lu, Chun

    2016-01-01

    Immunosuppressive drugs and biological agents may represent a potential risk of lymphoma development in patients with rheumatoid arthritis. But most cases are diffuse, large B-cell lymphomas. Primary cutaneous CD4+ small/medium-sized pleomorphic T-cell lymphoma, a provisional entity in the 2005 WHO-EORTC classification of cutaneous lymphomas, is only described in a limited number of reports. To our knowledge, our case is a rare instance of primary cutaneous CD4+ small/medium-sized pleomorphic T-cell lymphoma, after associated treatment with methotrexate and etanercept, in a patient with moderate rheumatoid arthritis who had undergone an orchidectomy incorrectly. PMID:27438209

  9. Temperature and relative humidity distributions in a medium-size administrative town in southwest Nigeria.

    PubMed

    Akinbode, O M; Eludoyin, A O; Fashae, O A

    2008-04-01

    This study was carried out in one of the medium-sized public administrative towns in the southwestern part of Nigeria. Its aim is to highlight the effect of spatial distribution of settlements, population, and socio-economic activities on urban air temperature and humidity in the town. Temperature and relative humidity data from 1992 to 2001 were obtained from three meteorological stations in Akure, the Administrative Capital of Ondo State, Nigeria. The stations are located within the Federal Ministry of Aviation, Akure Airport (FMA), Federal University of Technology, Akure (FUTA) and Federal School of Agriculture (SOA). Air temperature and relative humidity measurements were also obtained from 27 points, which were cited to include road junctions, markets, built up areas, etc., using sling psychrometer. The data were subsequently analysed for spatial and temporal variations using statistical packages (SPSS and Microsoft Excel) and isolines. Actual vapour pressure and dew point temperature were computed using Magnus conversion formulae. The results obtained showed that spatial variation was insignificant, in terms of the temperature and humidity variables. The annual mean temperature (Tmean) ranged between 21.9 and 30.4 degrees C while minimum (Tmin) and maximum (Tmax) temperatures varied from 13 to 26 and 21.5-39.6 degrees C, respectively. Relative humidity (RH), actual vapour pressure (Es) and dew point temperature (Td) values also varied from 39.1% to 98.2%, 19.7-20.8 gm(-3), and 17.3-17.8 degrees C, respectively. A significant relationship (p>0.6; r<0.05) between Tmin, Es and Td was observed while the daytime 'urban heat island' intensity (UHI) ranged between 0.5 and 2.5 degrees C within the study period. The study concluded that there is influence of urban canopy on the microclimate of Akure, and hypothesizes that the urban dwellers may be subjected to some levels of weather related physiological disorderliness.

  10. Maximum urban heat island intensity in a medium-sized coastal Mediterranean city

    NASA Astrophysics Data System (ADS)

    Papanastasiou, Dimitris K.; Kittas, Constantinos

    2012-02-01

    This paper studies the maximum intensity of the urban heat island (UHI) that develops in Volos urban area, a medium-sized coastal city in central Greece. The maximum temperature difference between the city center and a suburb is 3.4°C and 3.1°C during winter and summer, respectively, while during both seasons the average maximum UHI intensity is 2.0°C. The UHI usually starts developing after sunset during both seasons. It could be attributed to the different nocturnal radiative cooling rate and to the different anthropogenic heat emission rate that are observed at the city center and at the suburb, as well as to meteorological conditions. The analysis reveals that during both seasons the daily maximum hourly (DMH) UHI intensity is positively correlated with solar radiation and with previous day's maximum hourly UHI intensity and negatively correlated with wind speed. It is also negatively correlated with relative humidity during winter but positively correlated with it during summer. This difference could be attributed to the different mechanisms that mainly drive humidity levels (i.e., evaporation in winter and sea breeze (SB) in summer). Moreover, it is found that SB development triggers a delay in UHI formation in summer. The impact of atmospheric pollution on maximum UHI intensity is also examined. An increase in PM10 concentration is associated with an increase in maximum UHI intensity during winter and with a decrease during summer. The impact of PM10 on UHI is caused by the attenuation of the incoming and the outgoing radiation. Additionally, this study shows that the weekly cycle of the city activities induces a weekly variation in maximum UHI intensity levels. The weekly range of DMH UHI intensity is not very large, being more pronounced during winter (0.4°C). Moreover, a first attempt is made to predict the DMH UHI intensity by applying regression models, whose success is rather promising.

  11. High-Resolution Spectroscopic Studies of Complexes Formed by Medium-Size Organic Molecules.

    PubMed

    Becucci, Maurizio; Melandri, Sonia

    2016-05-11

    A wealth of structural and dynamical information has been obtained in the last 30 years from the study of high-resolution spectra of molecular clusters generated in a cold supersonic expansion by means of highly resolved spectroscopic methods. The data obtained, generally lead to determination of the structures of stable conformations. In addition, in the case of weakly bound molecular complexes, it is usual to observe the effects of internal motions due to the shallowness of the potential energy surfaces involved and the flexibility of the systems. In the case of electronic excitation experiments, also the effect of electronic distribution changes on both equilibrium structures and internal motions becomes accessible. The structural and dynamical information that can be obtained by applying suitable theoretical models to the analysis of these unusually complex spectra allows the determination and understanding of the driving forces involved in formation of the molecular complex. In this way, many types of non-covalent interactions have been characterized, from pure van der Waals interactions in complexes of rare gases to moderate-strength and weak hydrogen bonds and to the most recent halogen bonds and n-π interactions. The aim of this review is to underline how the different experimental and theoretical methods converge in giving a detailed picture of weak interactions in small molecular adducts involving medium-size molecules. The conclusions regarding geometries and energies can contribute to understanding of the different driving forces involved in the dynamics of the processes and can be exploited in all fields of chemistry and biochemistry, from design of new materials with novel properties to rational design of drugs. PMID:26986455

  12. Morbidity of asylum seekers in a medium-sized German city.

    PubMed

    Führer, Amand; Eichner, Friederike; Stang, Andreas

    2016-07-01

    Asylum seekers constitute a particularly vulnerable group. Not only is their physical and mental health exposed to multiple stresses, but also their access to health care in Germany is legally restricted. Up to now, there is very limited scientific literature investigating the health-outcomes of asylum seekers in Germany. The aim of this study was to provide prevalence data on the morbidity and vaccination status of asylum seekers in a medium-sized German city. We used a structured questionnaire in a cross-sectional study on 214 adult asylum seekers (182 males, 24 females, 8 unknown) in Halle, Germany, 2015. The questionnaire inquired about the respondent's self-reported physical health and vaccination status and assessed their mental health using the Hopkins-Symptom-Checklist-25 and the Harvard Trauma Questionnaire. Pain (37.9 %) and psychological illness (depression: 54.7 %, anxiety disorder: 40.2 %; post-traumatic stress disorder: 18.2 %) were the most prevalent complaints. Among asylum seekers with psychological complaints, co-morbidity was high (64.2 % had more than one psychological disease). 5.6 % of the respondents mentioned suicidal thoughts. The prevalence of chronic diseases was low. We suggest interventions to improve asylum seekers' health on two levels: first, the obligatory initial medical examination after the refugees' arrival at the reception centre should be complemented with questions related to the vaccination status and the most common complaints including pain and psychological diseases. Second, medical infrastructure should be expanded to better serve the needs of culturally and linguistically diverse patient populations, so that those screened positive can be referred for early diagnosis and treatment. PMID:27068422

  13. Place and type of meals consumed by adults in medium sized cities

    PubMed Central

    Carús, Juliana Pires; França, Giovanny V A; Barros, Aluísio J D

    2014-01-01

    OBJECTIVE To describe the meals consumed by adults living in a midsize city in the South of Brazil, according to the place and preparation. METHODS A population-based cross-sectional study was conducted in Pelotas, Southern Brazil, in 2012. The two-stage sampling design used the 2010 census tracts as primary sampling units. Data were collected on the place of meals (at home or out) and on the kind of preparations consumed at home (homemade, snacks, take away food) covering the two days prior to the interview, using a standardized questionnaire. RESULTS The study included 2,927 adults, of which 59.0% were female, 60.0% were below 50 years of age and 58.0% were in work. Data were collected on 11,581 meals consumed on the two days preceding the interview, 25.0% were consumed outside of the home at lunchtime, and 10.0% at dinnertime. Considering home meals, most participants reported eating food prepared at home at both lunch and dinner. The majority of out-of-home meals (64.0% for lunch and 61.0% for dinner) were consumed in the work place, mostly based on food prepared at home. Individuals eating out of home were mostly male, young and highly educated. The occupational categories that ate at restaurants more often were trade workers, businessmen, teachers and graduate professionals. CONCLUSIONS Despite the changes in eating patterns described in Brazil in recent years, residents of medium-sized towns still mostly eat at home, consuming homemade food. PMID:24789639

  14. Fox baiting against Echinococcus multilocularis: contrasted achievements among two medium size cities.

    PubMed

    Comte, S; Raton, V; Raoul, F; Hegglin, D; Giraudoux, P; Deplazes, P; Favier, S; Gottschek, D; Umhang, G; Boué, F; Combes, B

    2013-08-01

    In Europe, most cities are currently colonized by red foxes (Vulpes vulpes), which are considered to be the main definitive host of the zoonotic cestode Echinococcus multilocularis. The risk of transmission to humans is of particular concern where high fox populations overlap with high human populations. The distribution of baits containing praziquantel has successfully reduced the infection pressure in rural areas and in small plots within large cities. The purpose of this study was to assess its efficiency in two medium size cities (less than 100,000 inhabitants) in areas of high human alveolar echinococcosis incidence. From August 2006 to March 2009, 14 baiting campaigns of praziquantel treatment were run in Annemasse and Pontarlier (Eastern France), each of which encompassed 33 km(2), with a density of 40 baits/km(2). The bait consumption appeared to be lower in strictly urban context compared to suburban areas (78.9% vs. 93.4%) and lower in Annemasse than in Pontarlier (82.2% vs. 89.5%). During our study, the prevalence of E. multilocularis, as assessed by EM-ELISA on fox faeces collected in the field in Annemasse, was lower within the treated area than in the rural control area. A "before/during" treatment comparison revealed a significant decrease of spring prevalence from 13.3% to 2.2%. No significant change in prevalence was detected in Pontarlier (stable prevalence: 9.1%) where the contamination of the treated area followed the temporal trend observed in the control area. There, a greater resilience of the parasite's life cycle, probably due to a strong pressure of recontamination from outside the treated area, may have counteracted the prophylaxis treatment. These contrasted outcomes suggest that the frequency of fox anthelmintic treatment should be adapted to the local situation. PMID:23642656

  15. Clinical audit of multidisciplinary care at a medium-sized hospital in Spain

    PubMed Central

    2014-01-01

    Background Multidisciplinary care is a key enabler in the provision of high quality care for cancer patients. Despite compelling evidence supporting their benefit to patients and for providers, multidisciplinary cancer conferences (MCC) are not universally occurring. Team composition of MCC reflects the multidisciplinary nature of the body. Lack of nursing input can have a negative impact on team decision making. The objective of this study was to evaluate multidisciplinary care and adherence to national recommendations at a medium-sized hospital through a clinical audit of cancer conferences and clinical records. Methods A total of 77 multidisciplinary cancer conferences were visited and 496 electronic health records were reviewed. The regularity of meetings and multidisciplinary attendance were evaluated. Each electronic health record was checked to verify documented prospective discussion before any treatment was started. Results Nine multidisciplinary teams meet on a weekly or biweekly basis at the hospital with an average number of ten people and six different specialties represented. Average duration of meetings was 46.8 min. Though most patients (64.5%) were discussed at some point at the relevant cancer conference, only 40% had a documented multidisciplinary team discussion prior to the first treatment. Pathological stage (pTNM) was documented in 53.6% of clinical records. Conclusions Nursing representatives should be included as usual attendees at cancer conferences. Prospective discussion of all cancer cases should be encouraged. Use of checklists and systematic collection of key information, specifically cancer staging, could improve clinical documentation in the electronic clinical record. PMID:24597686

  16. Lateral plume spreading in a medium size river plume using surface Lagrangian drifters

    NASA Astrophysics Data System (ADS)

    Kakoulaki, Georgia; MacDonald, Daniel; Cole, Kelly

    2016-04-01

    Groups of 27 Lagrangian drifters deployed in the Merrimack River plume over twelve tides, with river discharges ranging between 150-800 m3/s, are used to understand the external forcing mechanisms responsible for the extent of spreading in river plumes. The transition of buoyant flow from a confined estuary to an unconfined coastal ocean introduces the complicated phenomenon of lateral spreading, which occurs preferentially near the surface and results in a flow that spreads laterally as plume water propagates forward in the direction of mean flow. In this work, the temporal and spatial scales of the active spreading region are estimated in the sampled plumes and related to environmental parameters at the river mouth such as inflow river discharge, initial drifter velocity at the point of release, initial reduced gravity and initial internal wave speed. The initial wave speed was found to be the environmental parameter that best predicts the magnitude of the spatial and temporal scales of the active spreading region. Previous studies have asserted the importance of initial plume parameters in near-field plume evolution and here we extrapolate this idea to the mid-field. Interestingly, we find that that lateral plume spreading is arrested at approximately one inertial radius from the river mouth. We therefore propose that the shutdown of spreading is controlled almost exclusively by Coriolis force and it is responsible for converting spreading motion to spinning motion after the mid field region. The outcomes of this research are widely applicable to other energetic, medium size river plume systems and to the author's knowledge this is the first study to estimate lateral plume expansion using observations beyond the immediate near field region of a river plume. This work will provide further development in understanding plume dynamics and the fundamental physical processes that influence coastal ecosystems.

  17. Revenue-Based Financial Modeling: A Sustainable Model for Medium-Size, Private, Mission-Based Schools of Education

    ERIC Educational Resources Information Center

    Harbouk, Joseph

    2011-01-01

    This study examined the implementation and assessment of revenue-based budgeting at a medium-size, private, mission-based graduate school of education (SOE), under the pseudonym Peter Claver University (PCU). Additionally, two other similar schools were included in the study because they used revenue-based budgeting for a period of 10 years or…

  18. The Anonymity of Catalan and the Authenticity of Estonian: Two Paths for the Development of Medium-Sized Languages

    ERIC Educational Resources Information Center

    Soler, Josep

    2013-01-01

    Catalan and Estonian can be considered "medium-sized" languages with some key common features that allow us to analyze the evolution of the two cases comparatively. Firstly, other formerly hegemonic languages (Spanish and Russian, respectively) have historically minoritized them. Secondly, the political equilibrium has now changed in such a way…

  19. SWR 1000: An Advanced, Medium-Sized Boiling Water Reactor, Ready for Deployment

    SciTech Connect

    Brettschuh, Werner

    2006-07-01

    The latest developments in nuclear power generation technology mainly concern large-capacity plants in the 1550 -1600 MW range, or very small plants (100 - 350 MW). The SWR 1000 boiling water reactor (BWR), by contrast, offers all of the advantages of an advanced plant design, with excellent safety performance and competitive power generation costs, in the medium-capacity range (1000 - 1250 MW). The SWR 1000 is particularly suitable for countries whose power systems are not designed for large-capacity generating facilities. The economic efficiency of this medium-sized plant in comparison with large-capacity designs is achieved by deploying very simple passive safety equipment, simplified systems for plant operation, and a very simple plant configuration in which systems engineering is optimized and dependence on electrical and instrumentation and control (I and C) systems is reduced. In addition, systems and components that require protection against natural and external man-made hazards are accommodated in such a way that as few buildings as possible have to be designed to withstand the loads from such events. The fuel assemblies to be deployed in the SWR 1000 core, meanwhile, have been enlarged from a 10 x 10 rod array to a 12 x 12 array. This reduces the total number of fuel assemblies in the core and thus also the number of control rods and control rod drives, as well as in-core neutron flux monitors. The design owes its competitiveness to the fact that investment costs, maintenance costs and fuel cycle costs are all lower. In addition, refueling outages are shorter, thanks to the reduced scope of outage activities. The larger fuel assemblies have been extensively and successfully tested, as have all of the other new components and systems incorporated into the plant design. As in existing plants, the forced coolant circulation method is deployed, ensuring problem-free startup, and enabling plant operators to adjust power rapidly in the high power range (70

  20. Assessment of metal exposure, ecological status and required water quality monitoring strategies in small- to medium-size temperate rivers.

    PubMed

    Marijić, Vlatka Filipović; Perić, Mirela Sertić; Kepčija, Renata Matoničkin; Dragun, Zrinka; Kovarik, Ivana; Gulin, Vesna; Erk, Marijana

    2016-01-01

    The present study was undertaken to obtain a better understanding of the seasonal variability of total dissolved metal/metalloid levels and physicochemical parameters within small- to medium-size freshwater ecosystems in temperate climate region. The research was conducted in four seasons in the Sutla River, medium-size polluted, and the Črnomerec Stream, small-size unpolluted watercourse in Croatia. In the Sutla River, characterized by the rural/industrial catchment, physicochemical parameters and total dissolved metal concentrations of 21 trace and 4 macro elements were analysed downstream of the point source of pollution, the glass production facility, indicating for the first time their variability across four seasons. Based on dissolved oxygen, total dissolved solids, nutrient concentrations, conductivity and total chemical oxygen demand, quality status of the Sutla River was good, but moderate to poor during summer, what was additionally confirmed by the highest levels of the most of 25 measured metals/metalloids in summer. Comparison with the reference small-size watercourse, the Črnomerec Stream, indicated significant anthropogenic impact on the Sutla River, most evident for Fe, Mn, Mo, Ni, Pb, Rb and Tl levels (3-70-fold higher in the Sutla River across all seasons). Generally, presented results indicated significant decrease of the water quality in the anthropogenically impacted small- to medium-size watercourses in summer, regarding physicochemical water parameters and total dissolved metal/metalloid concentrations, and pointed to significant seasonality of these parameters. Confirmed seasonality of river ecological status indicates that seasonal assessment represents a prerequisite for proper classification of the water quality in small- to medium-size temperate rivers.

  1. 78 FR 37409 - Small Business Size Standards: Finance and Insurance and Management of Companies and Enterprises

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-20

    ... From the Federal Register Online via the Government Publishing Office ] SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG45 Small Business Size Standards: Finance and Insurance and Management... enrollment in the Systems of Award Management's (SAM) Dynamic Small Business Search database, and more...

  2. Small, medium, large or supersize? The development and evaluation of interventions targeted at portion size

    PubMed Central

    Vermeer, W M; Steenhuis, I H M; Poelman, M P

    2014-01-01

    In the past decades, portion sizes of high-caloric foods and drinks have increased and can be considered an important environmental obesogenic factor. This paper describes a research project in which the feasibility and effectiveness of environmental interventions targeted at portion size was evaluated. The studies that we conducted revealed that portion size labeling, offering a larger variety of portion sizes, and proportional pricing (that is, a comparable price per unit regardless of the size) were considered feasible to implement according to both consumers and point-of-purchase representatives. Studies into the effectiveness of these interventions demonstrated that the impact of portion size labeling on the (intended) consumption of soft drinks was, at most, modest. Furthermore, the introduction of smaller portion sizes of hot meals in worksite cafeterias in addition to the existing size stimulated a moderate number of consumers to replace their large meals by a small meal. Elaborating on these findings, we advocate further research into communication and marketing strategies related to portion size interventions; the development of environmental portion size interventions as well as educational interventions that improve people's ability to deal with a ‘super-sized' environment; the implementation of regulation with respect to portion size labeling, and the use of nudges to stimulate consumers to select healthier portion sizes. PMID:25033959

  3. Distinguishing between the bone fragments of medium-sized mammals and children. A histological identification method for archaeology.

    PubMed

    Cuijpers, Saddha A G F M

    2009-06-01

    In archaeology, it is not always possible to identify bone fragments. A novel approach was chosen to assess the potential of histology as an identification tool. Instead of studying a few bones of different categories from many species, this study concentrated on the diaphyses of long bones in four species of comparable size which are relevant to archaeology; young humans, pigs, sheep and goats, to broaden the insight into variations in diaphyseal bone structure within and between these species. A general difference in the primary bone structure was found between children older than one year and the three medium-sized mammals, namely lamellar vs. fibro-lamellar primary bone. Although, the diaphyseal bone structure of children below the age of one year also showed (developing) fibro-lamellar bone, its composition was distinctive from the medium-sized mammals. A difference in the secondary bone structure was also observed. Connecting (Volkmann's) canals, giving the secondary bone a reticular aspect, were seen in the medium-sized mammals but not in the young human long bones. To confirm the validity and applicability of these observed histological differences, a blind test was conducted on 14 diaphyseal fragments of identified long bones from archaeological sites. The results were very promising. All the bone fragments were correctly attributed using the difference in primary bone structure, even when the bone was severely degraded.

  4. Learning To Compete: Education, Training & Enterprise in Ghana, Kenya & South Africa. Education Research Paper.

    ERIC Educational Resources Information Center

    Afenyadu, Dela; King, Kenneth; McGrath, Simon; Oketch, Henry; Rogerson, Christian; Visser, Kobus

    A multinational, multidisciplinary team examined the impact of globalization on education, training, and small and medium sized enterprise development in Ghana, Kenya, and South Africa. The study focused on the following issues: developing a learner-led competitiveness approach; building learning enterprises; education for microenterprises and…

  5. Safety practices in Jordanian manufacturing enterprises within industrial estates.

    PubMed

    Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

    2013-01-01

    This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

  6. [Uncertainty in estimating short-term health effects of air pollution in small- and medium-size cities].

    PubMed

    Giannini, Simone; Zauli Sajani, Stefano; De Girolamo, Gianfranco; Goldoni, Carlo Alberto; Lauriola, Paolo

    2016-01-01

    Over the years, a growing number of small- and medium-size cities have been included in meta-analytic studies on short-term health effects of air pollution in order to increase the statistical power of these studies. This has produced an increase in the precision of meta-analytic estimates, but also a growing interest in city-specific results. As a consequence, relevant differences in the estimates have been frequently found, even for nearby cities with similar environmental and sociodemographic characteristics. This article aims at showing the variability of effect estimates for small- to medium-size cities in relation to the extent of the considered time frame, highlighting quantitatively the caution that must be taken in interpreting and communicating the results derived from short time series of data. The study was based on the analysis of the data from two cities in Emilia-Romagna Region (Northern Italy): Ravenna and Reggio Emilia. PMID:27436256

  7. How medium-size resurgent calderas work: the case of Pantelleria, Ischia and the unrest Campi Flegrei structures

    NASA Astrophysics Data System (ADS)

    Orsi, Giovanni; Civetta, Lucia; Arienzo, Ilenia; Carandente, Antonio; D'Antonio, Massimo; de Vita, Sandro; di Renzo, Valeria; di Vito, Mauro; Marotta, Enrica; Belviso, Pasquale

    2010-05-01

    Assessment of time and space relationships among magmatism, volcanism, and resurgence of medium-size calderas is a necessary tool to formulate a general model for their dynamics which also permits to forecast their evolution. To define a general hypothesis for the Campi Flegrei caldera, in a persistent state of unrest, the Ischia and Pantelleria medium-size resurgent structures, in variable stages of evolution, have been investigated. In particular some parameters such as the structural and volcanological evolution, with emphasis on resurgence dynamics and coeval volcanism, and the evolution, present state and role of the magmatic system in resurgence, have been defined. For the Campi Flegrei caldera, the data collected during unrest episodes have also been taken into account. This innovative approach adds a time-perspective on how resurgent calderas behave. The proposed general hypothesis will help in long- and short-term volcanic hazards assessment and will support Civil Defence Authorities in elaborating actions devoted to volcanic risk reduction.

  8. Injection barrel with a tapered structure for a low speed and small size cryogenic hydrogen pellet in medium-sized plasma fusion devices

    NASA Astrophysics Data System (ADS)

    Motojima, G.; Sakamoto, R.; Okada, H.; Nagasaki, K.; Yamada, H.; Nakamura, Y.; Kado, S.; Kobayashi, S.; Konoshima, S.; Minami, T.; Ohshima, S.; Yamamoto, S.; Mizuuchi, T.; Mutoh, T.

    2016-10-01

    An injection barrel was designed and fabricated for a small size 0.8 mm cryogenic pellet with a low speed of 200-300 m/s in medium-sized plasma fusion devices. Pellet injection with pneumatic acceleration was examined using a conventional in situ technique. A tapered structure was applied in the downstream side of the injection barrel to satisfy the requirement of pellet speed reduction by expansion of the propellant gas. Shadowgraph and light gate measurements show that the intact pellets have speeds of 260 ± 30 m/s and a typical size of 1.1-1.2 mm. The pellet ablation code based on a neutral gas shielding model shows that the penetration depth of the measured pellet parameters does not cross the plasma center, even in medium-sized plasma devices such as the Heliotron J helical device. The injection barrel with a tapered structure developed in this study is feasible for low speed pellet injection.

  9. Lowest-energy cage structures of medium-sized (ZnO){sub n} clusters with n = 15 − 24

    SciTech Connect

    Tang, Lingli; Sai, Linwei; Zhao, Jijun; Qiu, Ruifeng

    2015-01-22

    Fullerene-like cage structures of medium-sized (ZnO){sub n} clusters with n = 15 − 24 were generated by spiral algorithm and optimized using density functional theory calculations. Most of these lowest-energy cage structures contain only four-membered and six-membered rings, whereas eight-membered rings were found in the lowest-energy cages of (ZnO){sub n} (n = 19, 20, 23, 24). Our best cage configurations either reproduce or prevail the previously reported ones. The size-dependent electronic properties were also discussed.

  10. ELECTRONIC SPECTROSCOPY OF MEDIUM-SIZED POLYCYCLIC AROMATIC HYDROCARBONS: IMPLICATIONS FOR THE CARRIERS OF THE 2175 A UV BUMP

    SciTech Connect

    Steglich, M.; Jaeger, C.; Rouille, G.; Huisken, F.; Mutschke, H.; Henning, Th. E-mail: Cornelia.Jaeger@uni-jena.de

    2010-03-20

    Mixtures of polycyclic aromatic hydrocarbons (PAHs) have been produced by means of laser pyrolysis. The main fraction of the extracted PAHs was primarily medium-sized, up to a maximum size of 38 carbon atoms per molecule. The use of different extraction solvents and subsequent chromatographic fractionation provided mixtures of different size distributions. UV-VIS absorption spectra have been measured at low temperature by matrix isolation spectroscopy and at room temperature with PAHs as film-like deposits on transparent substrates. In accordance with semi-empirical calculations, our findings suggest that large PAHs with sizes around 50-60 carbon atoms per molecule could be responsible for the interstellar UV bump at 217.5 nm.

  11. Pay-for-performance and public reporting program participation and administrative challenges among small- and medium-sized physician practices.

    PubMed

    Hearld, Larry R; Alexander, Jeffrey A; Shi, Yunfeng; Casalino, Lawrence P

    2014-06-01

    A key component of efforts to improve the quality of care in the United States is the use of public reporting and pay-for-performance programs. Little is known, however, about the extent to which small- and medium-sized physician practices are participating in these programs. This study examined the participation of small- and medium-sized physician practices in pay-for-performance and public reporting programs and the characteristics of the participating practices. Using cross-sectional data from a national sample of 1,734 small- and medium-sized physician practices throughout the United States, we found that many practices (61.2%) were participating in at least one program, while far fewer (19.2%) were participating in multiple programs. Among practices participating in multiple programs, relatively few (21.9%) reported high levels of administrative problems due to a lack of standardization on performance measures. The study also suggests that some structural features are associated with participation and may provide leverage points for fostering participation. PMID:24263052

  12. Predation selectively culls medium-sized species from island mammal faunas.

    PubMed

    Hanna, Emily; Cardillo, Marcel

    2014-01-01

    Globally, elevated extinction risk in mammals is strongly associated with large body size. However, in regions where introduced predators exert strong top-down pressure on mammal populations, the selectivity of extinctions may be skewed towards species of intermediate body size, leading to a hump-shaped relationship between size and extinction risk. The existence of this kind of extinction pattern, and its link to predation, has been contentious and difficult to demonstrate. Here, we test the hypothesis of a hump-shaped body size-extinction relationship, using a database of 927 island mammal populations. We show that the size-selectivity of extinctions on many islands has exceeded that expected under null models. On islands with introduced predators, extinctions are biased towards intermediate body sizes, but this bias does not occur on islands without predators. Hence, on islands with a large-bodied mammal fauna, predators are selectively culling species from the lower end of the size distribution, and on islands with a small-bodied fauna they are culling species from the upper end. These findings suggest that it will be difficult to use predictable generalizations about extinction patterns, such as a positive body size-extinction risk association, to anticipate future species declines and plan conservation strategies accordingly.

  13. The role of fcc tetrahedral subunits in the phase behavior of medium sized Lennard-Jones clusters.

    PubMed

    Saika-Voivod, Ivan; Poon, Louis; Bowles, Richard K

    2010-08-21

    The free energy of a 600-atom Lennard-Jones cluster is calculated as a function of surface and bulk crystallinity in order to study the structural transformations that occur in the core of medium sized clusters. Within the order parameter range studied, we find the existence of two free energy minima at temperatures near freezing. One minimum, at low values of both bulk and surface order, belongs to the liquid phase. The second minimum exhibits a highly ordered core with a disordered surface and is related to structures containing a single fcc-tetrahedral subunit, with an edge length of seven atoms (l=7), located in the particle core. At lower temperatures, a third minimum appears at intermediate values of the bulk order parameter which is shown to be related to the formation of multiple l=6 tetrahedra in the core of the cluster. We also use molecular dynamics simulations to follow a series of nucleation events and find that the clusters freeze to structures containing l=5, 6, 7, and 8 sized tetrahedra as well as those containing no tetrahedral units. The structural correlations between bulk and surface order with the size of the tetrahedral units in the cluster core are examined. Finally, the relationships between the formation of fcc tetrahedral subunits in the core, the phase behavior of medium sized clusters and the nucleation of noncrystalline global structures such as icosahedra and decahedra are discussed.

  14. A qualitative study of pandemic influenza preparedness among small and medium-sized businesses in New York City.

    PubMed

    Burton, Deron C; Confield, Evan; Gasner, Mary Rose; Weisfuse, Isaac

    2011-10-01

    Small businesses need to engage in continuity planning to assure delivery of goods and services and to sustain the economy during an influenza pandemic. This is especially true in New York City, where 98 per cent of businesses have fewer than 100 employees. It was an objective therefore, to determine pandemic influenza business continuity practices and strategies suitable for small and medium-sized NYC businesses. The study design used focus groups, and the participants were owners and managers of businesses with fewer than 500 employees in New York City. The main outcome measures looked for were the degree of pandemic preparedness, and the feasibility of currently proposed business continuity strategies. Most participants reported that their businesses had no pandemic influenza plan. Agreement with feasibility of specific business continuity strategies was influenced by the type of business represented, cost of the strategy, and business size. It was concluded that recommendations for pandemic-related business continuity plans for small and medium-sized businesses should be tailored to the type and size of business and should highlight the broad utility of the proposed strategies to address a range of business stressors. PMID:22308579

  15. A qualitative study of pandemic influenza preparedness among small and medium-sized businesses in New York City.

    PubMed

    Burton, Deron C; Confield, Evan; Gasner, Mary Rose; Weisfuse, Isaac

    2011-10-01

    Small businesses need to engage in continuity planning to assure delivery of goods and services and to sustain the economy during an influenza pandemic. This is especially true in New York City, where 98 per cent of businesses have fewer than 100 employees. It was an objective therefore, to determine pandemic influenza business continuity practices and strategies suitable for small and medium-sized NYC businesses. The study design used focus groups, and the participants were owners and managers of businesses with fewer than 500 employees in New York City. The main outcome measures looked for were the degree of pandemic preparedness, and the feasibility of currently proposed business continuity strategies. Most participants reported that their businesses had no pandemic influenza plan. Agreement with feasibility of specific business continuity strategies was influenced by the type of business represented, cost of the strategy, and business size. It was concluded that recommendations for pandemic-related business continuity plans for small and medium-sized businesses should be tailored to the type and size of business and should highlight the broad utility of the proposed strategies to address a range of business stressors.

  16. Predation selectively culls medium-sized species from island mammal faunas

    PubMed Central

    Hanna, Emily; Cardillo, Marcel

    2014-01-01

    Globally, elevated extinction risk in mammals is strongly associated with large body size. However, in regions where introduced predators exert strong top-down pressure on mammal populations, the selectivity of extinctions may be skewed towards species of intermediate body size, leading to a hump-shaped relationship between size and extinction risk. The existence of this kind of extinction pattern, and its link to predation, has been contentious and difficult to demonstrate. Here, we test the hypothesis of a hump-shaped body size–extinction relationship, using a database of 927 island mammal populations. We show that the size-selectivity of extinctions on many islands has exceeded that expected under null models. On islands with introduced predators, extinctions are biased towards intermediate body sizes, but this bias does not occur on islands without predators. Hence, on islands with a large-bodied mammal fauna, predators are selectively culling species from the lower end of the size distribution, and on islands with a small-bodied fauna they are culling species from the upper end. These findings suggest that it will be difficult to use predictable generalizations about extinction patterns, such as a positive body size–extinction risk association, to anticipate future species declines and plan conservation strategies accordingly. PMID:24694691

  17. 75 FR 5804 - Small and Medium-Sized Enterprises: U.S. and EU Export Activities, and Barriers and Opportunities...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-04

    ... published in the Federal Registers of October 28, 2009 (74 FR 55581); December 1, 2009 (74 FR 62812); and.... SMEs face in their efforts to export. The strategies that SMEs have adopted to address or overcome those constraints. The benefits to SMEs of increased export opportunities from free trade agreements...

  18. 75 FR 9431 - Small and Medium-Sized Enterprises: U.S. and EU Export Activities, and Barriers and Opportunities...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-02

    ... October 28, 2009 (74 FR 55581); December 1, 2009 (74 FR 62812); and December 11, 2009 (74 FR 65787). A... the Federal Register of February 4, 2010 (75 FR 5804). Washington Hearing: The rescheduled Washington... Government activity was cancelled due to a snow storm. Persons wishing to appear at the March 18...

  19. Learning Cultures in Small to Medium-Size Enterprises and Their Role in Supporting the Learning Region

    ERIC Educational Resources Information Center

    Fitzpatrick, Maeve; O'Connell, Janice; Murphy, Eamonn

    2010-01-01

    The role of work-based learning is a pivotal part of developing the learning region. With rates of employment at their highest for many years across Europe, the need for up-skilling the workforce in many areas will be essential to retain competitiveness and employability. This paper will focus on quality management up-skilling in small to…

  20. Seasonally different reproductive investment in a medium-sized rodent (Cavia aperea).

    PubMed

    Rübensam, K; Hribal, R; Jewgenow, K; Guenther, A

    2015-09-01

    Pronounced seasonal variations in day length, temperature, and resource availability characterize the temperate regions and strongly influence the animals living in these environments. To survive and reproduce successfully, animals must allocate resources among competing physiological systems, and they usually adjust their time of breeding to the most adequate season. Here, we examined whether reproductive investment in the wild guinea pig (Cavia aperea) differs across seasons. We kept animals in combined indoor-outdoor enclosures under natural light and temperature year-round. We measured littering probability, litter size, and birth weight, as well as maternal weight loss during lactation. In addition, we measured ovulation rate as a parameter to adjust reproductive investment prenatally. Our data reveal strong seasonal variations in reproductive traits despite the fact that the animals reproduced year-round. The results show a reduced reproductive investment in winter, indicated by a lower litter size and birth weight of pups, whereas investment was highest in warm seasons (summer and autumn) with higher litter size and birth weight. Maternal weight loss in lactation was highest in cold seasons even if the litter size was lower. Furthermore, we found the regulation on the proximate level of the reproductive investment, the ovulation rate, to differ significantly between the seasons.

  1. A Review of Supply Chain Collaboration Practices for Small and Medium-sized Manufacturers

    NASA Astrophysics Data System (ADS)

    Wee, SY; Thoo, AC; Z, Sulaiman; FM, Muharam

    2016-05-01

    For the decades, organizations have endeavored to look for external sources for opportunities to achieve efficient and responsive supply chain with their partners especially for small and medium manufacturers (SMM). In this scenario, supply chain collaboration (SCC) is an interaction between supply chain members with the purpose of utilizes the knowledge and resources of customers and suppliers, and integrates the flows of products and information in order to achieve a common goal and obtain mutual benefit. The essential SCC dimensions for SMMs comprised of information sharing, joint knowledge creation, joint decision making, goal congruence and incentive sharing. The successful implementation of SCC can give SMMs an edge over their competitors. This paper aims to introduce a review of SCC practices for SMM. Overall, the findings provide managerial insights for the SMM in SCC implementation owing to resource scarcity and the need to draw SCC in order to ensure a sustainable competitive advantage.

  2. Discriminating between Medium-Sized Tridactyl Trackmakers: Tracking Ornithopod Tracks in the Base of the Cretaceous (Berriasian, Spain)

    PubMed Central

    Castanera, Diego; Pascual, Carlos; Razzolini, Novella L.; Vila, Bernat; Barco, José L.; Canudo, José I.

    2013-01-01

    Background Recent work on the Jurassic-Cretaceous transition of the Iberian Range (Spain) has opened a new window onto the interpretation of the trackmakers of some medium-sized tridactyl tracks. The ichnotaxon Therangospodus oncalensis has been described in the Huérteles Formation (Berriasian) and is one of the classical tracks from the area assigned to medium-sized theropods. Methodology/Principal Findings A review of the type locality of Therangospodus oncalensis (Fuentesalvo tracksite) and other tracksites from the Huérteles Formation (Berriasian) has yielded new information on the morphology, gait and trackmaker identity of the aforementioned ichnospecies. The new data suggest that the trackmaker is an ornithopod rather than a theropod on the basis of the length/width ratio, the anterior triangle length-width ratio, the short steps, the round to quadrangular heel pad impression and the probable manus impressions. Conclusions/Significance T. oncalensis shows similarities with various tracks from the Berriasian of Europe assigned to Iguanodontipus. The ichnotaxonomical status of this ichnospecies is here considered as Iguanodontipus? oncalensis due to the current state of knowledge of the ichnotaxonomy of medium-sized ornithopod tracks. This reassessment of I? oncalensis also has two significant implications for the palaeoecology of the faunas during the deposition of the Huérteles Formation: 1- the high number and percentage of theropod tracks would be lower than previous papers have suggested. 2- the gregarious behaviour described in the type locality (Fuentesalvo) would be among ornithopods instead of theropods. PMID:24303075

  3. The Alignment System for a Medium-Sized Schwarzschild-Couder Telescope Prototype for the Cherenkov Telescope Array

    NASA Astrophysics Data System (ADS)

    Ribeiro, Deivid; Humensky, Brian; Nieto, Daniel; V Vassiliev Group in UCLA division of Astronomy and Astrophysics, P Kaaret Group at Iowa University Department of Physics and Astronomy, CTA Consortium

    2016-01-01

    The Cherenkov Telescope Array (CTA) is an international project for a next-generation ground-based gamma-ray observatory. CTA, conceived as an array of tens of imaging atmospheric Cherenkov telescopes, comprising small, medium and large-size telescopes, is aiming to improve on the sensitivity of current-generation experiments by an order of magnitude and provide energy coverage from 20 GeV to more than 300 TeV. The Schwarzschild-Couder design is a candidate 9-m diameter medium-sized telescope featuring a novel aplanatic two-mirror optical design capable of a wide field of view with significantly improved imaging resolution as compared to the traditional Davies-Cotton optical design. Achieving this imaging resolution imposes strict mirror alignment requirements that necessitate a sophisticated alignment system. This system uses a collection of position sensors between panels to determine the relative position of adjacent panels; each panel is mounted on a Stewart platform to allow motion control with six degrees of freedom, facilitating the alignment of the optical surface for the segmented primary and secondary mirrors. Alignments of the primary and secondary mirrors and the camera focal plane with respect to each other are performed utilizing a set of CCD cameras which image LEDs placed on the mirror panels to measure relative translation, and custom-built auto-collimators to measure relative tilt between the primary and secondary mirrors along the optical axis of the telescope. In this contribution we present the status of the development of the SC optical alignment system, soon to be materialized in a full-scale prototype SC medium-size telescope (pSCT) at the Fred Lawrence Whipple Observatory in southern Arizona.

  4. Using water and sanitation as an entry point to fight poverty and respond to HIV/AIDS: The case of Isulabasha Small Medium Enterprise

    NASA Astrophysics Data System (ADS)

    Manase, G.; Nkuna, Z.; Ngorima, E.

    South Africa is faced by a number of challenges that include low water and sanitation coverage in rural and peri-urban areas, high unemployment and increasing inequality between the rich and the poor as indicated by a Gini coefficient of 0.77; the second highest inequality in the world after Brazil. The situation is compounded by high HIV prevalence with South Africa having the largest HIV infection in the world. This case study demonstrates how water and sanitation is used as an entry point to address these major challenges and to empower communities. The project has two main components: the Small Medium Enterprise (SME) that trades in water and sanitation facilities and a community garden that ensures food security and nutrition for people living with HIV/AIDS. Income generated through these activities is ploughed back into the community through construction of sanitation facilities, maintenance of water pipes and paying school fees for orphans. In addition to creating employment, the project has also empowered the community to mobilise and address other challenges such as gender, child abuse and crime. The case study identifies weaknesses with projects designed solely to provide domestic drinking water and sanitation and calls for an integrated approach that uses water and sanitation as an entry point to unlock opportunities and empower the targeted communities.

  5. Cooling rate and size effects on the medium-range structure of multicomponent oxide glasses simulated by molecular dynamics

    NASA Astrophysics Data System (ADS)

    Tilocca, Antonio

    2013-09-01

    A set of molecular dynamics simulations were performed to investigate the effect of cooling rate and system size on the medium-range structure of melt-derived multicomponent silicate glasses, represented by the quaternary 45S5 Bioglass composition. Given the significant impact of the glass degradation on applications of these materials in biomedicine and nuclear waste disposal, bulk structural features which directly affect the glass dissolution process are of particular interest. Connectivity of the silicate matrix, ion clustering and nanosegregation, distribution of ring and chain structural patterns represent critical features in this context, which can be directly extracted from the models. A key issue is represented by the effect of the computational approach on the corresponding glass models, especially in light of recent indications questioning the suitability of conventional MD approaches (that is, involving melt-and-quench of systems containing ˜103 atoms at cooling rates of 5-10 K/ps) when applied to model these glasses. The analysis presented here compares MD models obtained with conventional and nonconventional cooling rates and system sizes, highlighting the trend and range of convergence of specific structural features in the medium range. The present results show that time-consuming computational approaches involving much lower cooling rates and/or significantly larger system sizes are in most cases not necessary in order to obtain a reliable description of the medium-range structure of multicomponent glasses. We identify the convergence range for specific properties and use them to discuss models of several glass compositions for which a possible influence of cooling-rate or size effects had been previously hypothesized. The trends highlighted here represent an important reference to obtain reliable models of multicomponent glasses and extract converged medium-range structural features which affect the glass degradation and thus their application

  6. Synthesis, antimicrobial activity and molecular docking of novel tetracyclic scaffolds incorporating a flavonoid framework with medium sized oxygen heterocycles.

    PubMed

    Dongamanti, Ashok; Aamate, Vikas Kumar; Devulapally, Mohan Gandhi; Gundu, Srinivas; Kotni, Meena Kumari; Manga, Vijjulatha; Balasubramanian, Sridhar; Ernala, Prasad

    2015-02-15

    A convenient approach for the synthesis of novel tetracyclic scaffolds incorporating a flavonoid framework with medium sized heterocyclic rings (eight-, nine-, ten- and eleven-membered rings) containing two oxygen atoms from flavonols through alkylation using different dibromoalkanes was described. The synthesized compounds were established based on the spectral data and X-ray crystal structure for 6c. The synthesized compounds were evaluated for their in vitro antimicrobial activity. Docking studies were carried out for most active two compounds 6f and 6i. PMID:25592711

  7. Synthesis, antimicrobial activity and molecular docking of novel tetracyclic scaffolds incorporating a flavonoid framework with medium sized oxygen heterocycles.

    PubMed

    Dongamanti, Ashok; Aamate, Vikas Kumar; Devulapally, Mohan Gandhi; Gundu, Srinivas; Kotni, Meena Kumari; Manga, Vijjulatha; Balasubramanian, Sridhar; Ernala, Prasad

    2015-02-15

    A convenient approach for the synthesis of novel tetracyclic scaffolds incorporating a flavonoid framework with medium sized heterocyclic rings (eight-, nine-, ten- and eleven-membered rings) containing two oxygen atoms from flavonols through alkylation using different dibromoalkanes was described. The synthesized compounds were established based on the spectral data and X-ray crystal structure for 6c. The synthesized compounds were evaluated for their in vitro antimicrobial activity. Docking studies were carried out for most active two compounds 6f and 6i.

  8. Cooling rate and size effects on the medium-range structure of multicomponent oxide glasses simulated by molecular dynamics

    SciTech Connect

    Tilocca, Antonio

    2013-09-21

    A set of molecular dynamics simulations were performed to investigate the effect of cooling rate and system size on the medium-range structure of melt-derived multicomponent silicate glasses, represented by the quaternary 45S5 Bioglass composition. Given the significant impact of the glass degradation on applications of these materials in biomedicine and nuclear waste disposal, bulk structural features which directly affect the glass dissolution process are of particular interest. Connectivity of the silicate matrix, ion clustering and nanosegregation, distribution of ring and chain structural patterns represent critical features in this context, which can be directly extracted from the models. A key issue is represented by the effect of the computational approach on the corresponding glass models, especially in light of recent indications questioning the suitability of conventional MD approaches (that is, involving melt-and-quench of systems containing ∼10{sup 3} atoms at cooling rates of 5-10 K/ps) when applied to model these glasses. The analysis presented here compares MD models obtained with conventional and nonconventional cooling rates and system sizes, highlighting the trend and range of convergence of specific structural features in the medium range. The present results show that time-consuming computational approaches involving much lower cooling rates and/or significantly larger system sizes are in most cases not necessary in order to obtain a reliable description of the medium-range structure of multicomponent glasses. We identify the convergence range for specific properties and use them to discuss models of several glass compositions for which a possible influence of cooling-rate or size effects had been previously hypothesized. The trends highlighted here represent an important reference to obtain reliable models of multicomponent glasses and extract converged medium-range structural features which affect the glass degradation and thus their

  9. Cooling rate and size effects on the medium-range structure of multicomponent oxide glasses simulated by molecular dynamics.

    PubMed

    Tilocca, Antonio

    2013-09-21

    A set of molecular dynamics simulations were performed to investigate the effect of cooling rate and system size on the medium-range structure of melt-derived multicomponent silicate glasses, represented by the quaternary 45S5 Bioglass composition. Given the significant impact of the glass degradation on applications of these materials in biomedicine and nuclear waste disposal, bulk structural features which directly affect the glass dissolution process are of particular interest. Connectivity of the silicate matrix, ion clustering and nanosegregation, distribution of ring and chain structural patterns represent critical features in this context, which can be directly extracted from the models. A key issue is represented by the effect of the computational approach on the corresponding glass models, especially in light of recent indications questioning the suitability of conventional MD approaches (that is, involving melt-and-quench of systems containing ~10(3) atoms at cooling rates of 5-10 K/ps) when applied to model these glasses. The analysis presented here compares MD models obtained with conventional and nonconventional cooling rates and system sizes, highlighting the trend and range of convergence of specific structural features in the medium range. The present results show that time-consuming computational approaches involving much lower cooling rates and/or significantly larger system sizes are in most cases not necessary in order to obtain a reliable description of the medium-range structure of multicomponent glasses. We identify the convergence range for specific properties and use them to discuss models of several glass compositions for which a possible influence of cooling-rate or size effects had been previously hypothesized. The trends highlighted here represent an important reference to obtain reliable models of multicomponent glasses and extract converged medium-range structural features which affect the glass degradation and thus their application

  10. The ubiquity of micrometer-sized dust grains in the dense interstellar medium.

    PubMed

    Pagani, Laurent; Steinacker, Jürgen; Bacmann, Aurore; Stutz, Amelia; Henning, Thomas

    2010-09-24

    Cold molecular clouds are the birthplaces of stars and planets, where dense cores of gas collapse to form protostars. The dust mixed in these clouds is thought to be made of grains of an average size of 0.1 micrometer. We report the widespread detection of the coreshine effect as a direct sign of the existence of grown, micrometer-sized dust grains. This effect is seen in half of the cores we have analyzed in our survey, spanning all Galactic longitudes, and is dominated by changes in the internal properties and local environment of the cores, implying that the coreshine effect can be used to constrain fundamental core properties such as the three-dimensional density structure and ages and also the grain characteristics themselves.

  11. Medium-sized ideal reactor for continuous alcohol fermentation using immobilized microorganism

    SciTech Connect

    Skachova, H.; Gottvaldova, M.; Kucera, J.; Podrazky, V.

    1981-12-01

    Recently, alcohol fermentation has gained considerable attention with the aim of lowering its production cost in the production processes of both fuel ethanol and alcoholic beverages. The over-all cost is a summation of costs of various subsystems such as raw material (sugar, starch, and cellulosic substances) treatment, fermentation process, and alcohol separation from water solutions; lowering the cost of the fermentation process is very important in lowering the total cost. Several new techniques have been developed for economic continuous ethanol production. These include the slow growth of highly flocculent yeasts in a tower fermentor for beer production, use of a continuous wine fermentor with no mechanical stirring, cell recycle combined with continuous removal of ethanol under vacuum, a technique involving a bed of yeast admixed with an inert carrier, and use of immobilized yeast reactors in packed-bed column and in a three-stage double conical fluidized-bed bioreactor. All these techniques lead to increases, more or less, in reactor productivity, which in turn result in the reduction of the reactor size for a given production rate and a particular conversion. Since an improvement in the fermentation process often leads to a reduction of fermentor size and hence, a lowering of the initial construction cost, it is important to theoretically arrive at a solution to what is the minimum-size setup of ideal reactors from the viewpoint of liquid backmixing. In this short communication, the minimum-sized ideal reactor for a continuous alcohol fermentation using immobilized cells will be specifically discussed on the basis of a mathematical model. The solution will service for designing an optimal bioreactor. (Refs. 26).

  12. A Triple Helix Strategy for Promoting SME Development: The Case of a Dried Banana Community Enterprise in Thailand

    ERIC Educational Resources Information Center

    Yuwawutto, Sauwapa; Smitinont, Thitapha; Charoenanong, Numtip; Yokakul, Nattaka; Chatratana, Sonchai; Zawdie, Girma

    2010-01-01

    This paper examines the university-industry-government relationship as a mechanism for enhancing the efficiency and competitiveness of small and medium-sized enterprises (SMEs). The case of a community enterprise producing dried banana products in the north of Thailand is used to demonstrate the significance of the Triple Helix model for business…

  13. Determination of the overlap factor and its enhancement for medium-size tropospheric lidar systems: a ray-tracing approach

    NASA Astrophysics Data System (ADS)

    Kumar, Dhiraj; Rocadenbosch, Francesc

    2013-01-01

    The problem of overlap factor (OVF) computation and its near-range sensitivity for medium-size aperture (f/10, f/11) bi-axial tropospheric lidar systems using ray-tracing simulation software is presented. The method revisits both detector and fiber optics coupling alternatives at the telescope focal-plane along with the insertion of a field lens. A sensitivity analysis is carried out as a function of laser divergence, field lens, and detector/fiber positions, detector size, and the fiber's core diameter and numerical aperture. The ray-tracing approach presented here is straightforward and a comparatively much simpler solution than analytical-based methods. Parametric simulations are carried out to show that both approaches are coincident. Insertion of a field lens proves to be an elegant and low sensitivity solution for OVF enhancement, particularly, in the near-range of the lidar.

  14. Monte Carlo studies of medium-size telescope designs for the Cherenkov Telescope Array

    NASA Astrophysics Data System (ADS)

    Wood, M.; Jogler, T.; Dumm, J.; Funk, S.

    2016-01-01

    We present studies for optimizing the next generation of ground-based imaging atmospheric Cherenkov telescopes (IACTs). Results focus on mid-sized telescopes (MSTs) for CTA, detecting very high energy gamma rays in the energy range from a few hundred GeV to a few tens of TeV. We describe a novel, flexible detector Monte Carlo package, FAST (FAst Simulation for imaging air cherenkov Telescopes), that we use to simulate different array and telescope designs. The simulation is somewhat simplified to allow for efficient exploration over a large telescope design parameter space. We investigate a wide range of telescope performance parameters including optical resolution, camera pixel size, and light collection area. In order to ensure a comparison of the arrays at their maximum sensitivity, we analyze the simulations with the most sensitive techniques used in the field, such as maximum likelihood template reconstruction and boosted decision trees for background rejection. Choosing telescope design parameters representative of the proposed Davies-Cotton (DC) and Schwarzchild-Couder (SC) MST designs, we compare the performance of the arrays by examining the gamma-ray angular resolution and differential point-source sensitivity. We further investigate the array performance under a wide range of conditions, determining the impact of the number of telescopes, telescope separation, night sky background, and geomagnetic field. We find a 30-40% improvement in the gamma-ray angular resolution at all energies when comparing arrays with an equal number of SC and DC telescopes, significantly enhancing point-source sensitivity in the MST energy range. We attribute the increase in point-source sensitivity to the improved optical point-spread function and smaller pixel size of the SC telescope design.

  15. Monte Carlo studies of medium-size telescope designs for the Cherenkov Telescope Array

    DOE PAGES

    Wood, M. D.; Jogler, T.; Dumm, J.; Funk, S.

    2015-06-07

    In this paper, we present studies for optimizing the next generation of ground-based imaging atmospheric Cherenkov telescopes (IACTs). Results focus on mid-sized telescopes (MSTs) for CTA, detecting very high energy gamma rays in the energy range from a few hundred GeV to a few tens of TeV. We describe a novel, flexible detector Monte Carlo package, FAST (FAst Simulation for imaging air cherenkov Telescopes), that we use to simulate different array and telescope designs. The simulation is somewhat simplified to allow for efficient exploration over a large telescope design parameter space. We investigate a wide range of telescope performance parametersmore » including optical resolution, camera pixel size, and light collection area. In order to ensure a comparison of the arrays at their maximum sensitivity, we analyze the simulations with the most sensitive techniques used in the field, such as maximum likelihood template reconstruction and boosted decision trees for background rejection. Choosing telescope design parameters representative of the proposed Davies–Cotton (DC) and Schwarzchild–Couder (SC) MST designs, we compare the performance of the arrays by examining the gamma-ray angular resolution and differential point-source sensitivity. We further investigate the array performance under a wide range of conditions, determining the impact of the number of telescopes, telescope separation, night sky background, and geomagnetic field. We find a 30–40% improvement in the gamma-ray angular resolution at all energies when comparing arrays with an equal number of SC and DC telescopes, significantly enhancing point-source sensitivity in the MST energy range. Finally, we attribute the increase in point-source sensitivity to the improved optical point-spread function and smaller pixel size of the SC telescope design.« less

  16. Monte Carlo studies of medium-size telescope designs for the Cherenkov Telescope Array

    SciTech Connect

    Wood, M. D.; Jogler, T.; Dumm, J.; Funk, S.

    2015-06-07

    In this paper, we present studies for optimizing the next generation of ground-based imaging atmospheric Cherenkov telescopes (IACTs). Results focus on mid-sized telescopes (MSTs) for CTA, detecting very high energy gamma rays in the energy range from a few hundred GeV to a few tens of TeV. We describe a novel, flexible detector Monte Carlo package, FAST (FAst Simulation for imaging air cherenkov Telescopes), that we use to simulate different array and telescope designs. The simulation is somewhat simplified to allow for efficient exploration over a large telescope design parameter space. We investigate a wide range of telescope performance parameters including optical resolution, camera pixel size, and light collection area. In order to ensure a comparison of the arrays at their maximum sensitivity, we analyze the simulations with the most sensitive techniques used in the field, such as maximum likelihood template reconstruction and boosted decision trees for background rejection. Choosing telescope design parameters representative of the proposed Davies–Cotton (DC) and Schwarzchild–Couder (SC) MST designs, we compare the performance of the arrays by examining the gamma-ray angular resolution and differential point-source sensitivity. We further investigate the array performance under a wide range of conditions, determining the impact of the number of telescopes, telescope separation, night sky background, and geomagnetic field. We find a 30–40% improvement in the gamma-ray angular resolution at all energies when comparing arrays with an equal number of SC and DC telescopes, significantly enhancing point-source sensitivity in the MST energy range. Finally, we attribute the increase in point-source sensitivity to the improved optical point-spread function and smaller pixel size of the SC telescope design.

  17. Olive Oil Tracer Particle Size Analysis for Optical Flow Investigations in a Gas Medium

    NASA Astrophysics Data System (ADS)

    Harris, Shaun; Smith, Barton

    2014-11-01

    Seed tracer particles must be large enough to scatter sufficient light while being sufficiently small to follow the flow. These requirements motivate a desire for control over the particle size. For gas measurements, it is common to use atomized oil droplets as tracer particles. A Laskin nozzle is a device for generating oil droplets in air by directing high-pressure air through small holes under an oil surface. The droplet diameter frequency distribution can be varied by altering the hole diameter, the number of holes, or the inlet pressure. We will present a systematic study of the effect of these three parameters on the resultant particle distribution as it leaves the Laskin nozzle. The study was repeated for cases where the particles moved through a typical jet facility before their size was measured. While the jet facility resulted in an elimination of larger particles, the average particle diameter could be varied by a factor of two at both the seeder exit and downstream of the jet facility.

  18. Medium- to large-sized xylo-oligosaccharides are responsible for xylanase induction in Prevotella bryantii B14.

    PubMed

    Miyazaki, Kohji; Hirase, Tatsuaki; Kojima, Yoichi; Flint, Harry James

    2005-12-01

    Experiments were done to define the nature of the xylan-derived induction signal for xylanase activity, and evaluate which xylanase genes among the three known ones (xynA, xynB and xynC) are induced by the presence of xylan in Prevotella bryantii B(1)4. During the later stages of exponential growth on glucose, addition of 0.05 % water-soluble xylan (WS-X) stimulated xylanase formation within 30 min. Xylose, xylobiose, xylotriose, xylotetraose, xylopentaose, arabinose and glucuronic acid all failed to induce the xylanase activity. An acid-ethanol-soluble fraction of WS-X (approximate degree of polymerization 30) enhanced the activity significantly, whereas the acid-ethanol-insoluble fraction had no effect, unless first digested by the cloned P. bryantii XynC xylanase. These results indicate that medium- to large-sized xylo-oligosaccharides are responsible for induction. The transcription of all three known xylanase genes from P. bryantii was upregulated coordinately by addition of WS-X. There have been relatively few investigations into the regulation of xylanase activity in bacteria, and it appears to be unique that medium- to large-sized xylo-oligosaccharides are responsible for induction. PMID:16339957

  19. A biological and chemical characterization strategy for small and medium-sized industries connected to municipal sewage treatment plants

    SciTech Connect

    Tarkpea, M.; Eklund, B.; Andren, C.; Gravenfors, E.; Kukulska, Z.

    1998-02-01

    A cost-effective strategy for the characterization of wastewater from small and medium-sized industries is described. A mobile laboratory, equipped for performing on-site biological tests, was established near wastewater treatment facilities in two cities in Sweden for 1 week each in November 1992 and November 1993. The biological and chemical characterization was done on 24-h samples from 29 industries representing 12 types of activity with a bias toward the surface treatment and graphics industries. The biological testing program included a modified nitrification test, the Microtox test, and a modified growth inhibition test using Selenastrum capricornutum (an alga test). A Ceriodaphnia dubia (crustacean) test was also used for some industries. Different chemical assessments, aimed at indicating toxic, persistent, and bioaccumulating substances, were chosen for each industry on the basis of information they provided. Results show that sampling period and time are important factors to consider when designing a characterization strategy. Twenty-four-hour sampling is preferred to weekly sampling because highly toxic emissions of short duration that are detrimental to the biological treatment plant may occur. Variability in emissions was shown in this study but would not have been detected by a study based on weekly sampling. The strategy developed in this study was shown to be both a cost-effective and efficient tool for characterizing effluents from small and medium-sized industries.

  20. Deformation Behavior in Medium Mn Steel of Nanometer-Sized α' + γ Lamellar Structure

    NASA Astrophysics Data System (ADS)

    Heo, Yoon-Uk; Kim, Dong Hwi; Heo, Nam Hoe; Hong, Chang Wan; Kim, Sung-Joon

    2016-09-01

    Yielding and work-hardening phenomena in an Fe-10.62Mn-2.84Al-0.17C-0.5Mo steel, which is composed of nanometer-sized lamellae of α' and γ, are described on the basis of the Hall-Petch relations. Unlike the general expectation, yielding in the steel, which consists of lamellae of α' and mechanically stable γ, occurs through the propagation of pileup dislocations from α' to γ. However, when γ is mechanically unstable, yielding occurs through the stress-assisted martensitic transformation (SAMT) within the unstable γ region, resulting in a low YS of about 500 MPa. The overall prominent work-hardening behavior of this steel after yielding is due to the active SAMT, which does not accompany the increase in mobile dislocation density and so causes the high elastic strain rate. The carbon partitioning treatment increases the SAMT starting strength to about 980 MPa, which is caused by the mechanical stabilization of γ. The overall low work-hardening behavior of this case is mainly attributed to the active propagation of pile-up dislocation from α' to γ which causes the high plastic strain rate through the abrupt increase of mobile dislocation density.

  1. Use of recycling through medium size granular filters to treat small food processing industry effluents.

    PubMed

    Ménoret, C; Boutin, C; Liénard, A; Brissaud, F

    2002-01-01

    Currently there are no suitable wastewater treatment systems for effluents from small food processing industries (dairy, cheese, wine production). Such raw sewages are characterized by high organic matter concentrations (about 10 g COD L-1) and relatively low daily volumes (about 2 m3). An adaptation of attached-growth cultures on fine media processes, known to be easy and inexpensive to use, could fit both the technical and economical context of those industries. Coarser filter particle size distributions than those normally used allow a better aeration and reduce clogging risk. The transit time of the effluent through the porous filter materials is shortened and requires recycling to increase the contact time between the biomass and the substrate. A pilot plant was built to compare the efficiency of two kinds of filter materials, gravel (2-5 mm) and pozzolana (3-7 mm). Two measurement campaigns were undertaken on a full-scale unit dealing with cheese dairy effluents. Both pilot-scale and full-scale plants show high COD removal rates (> 95%). Pilot-scale experiments show that accumulation of organic matter leads to the clogging of the recycling filter. To prevent early clogging, a better definition of feeding cycles is needed. PMID:12201106

  2. Electrocardiogram on a chip: overview and first experiences of an electrocardiogram manufacturer of medium size.

    PubMed

    Abächerli, Roger; Braun, Francis; Zhou, Lingchuan; Kraemer, Michel; Felblinger, Jacques; Schmid, Hans-Jakob

    2006-10-01

    The integration of an electrocardiogram (ECG) device into a chip is already well known in the field of implanted devices, such as pacemakers. For noninvasive electrocardiology, this approach has not been used on a broad scale commercially. The extension of electrocardiology to telemetry, home care, and special applications as in magnetic resonance imaging has spawned a new interest in highly miniaturized ECG devices. In our company, we are aiming for using highly integrated devices exactly in these fields. On one hand, the home monitoring market ("eHealth," "pHealth") requires small and lightweight devices ("ECG in an electrode"); on the other hand, the use of an ECG device within a hostile environment as in an magnetic resonance imaging machine with strong electromagnetic fields requires small dimensions of the device. Of these 2 fields, the one of home monitoring is the most promising. There is a large population in need of such monitoring (eg, patients with congestive heart failure), and the cost issue in medical care drives the market in this direction. Projects in both fields will be presented as well as the first experiences as a middle-sized manufacturer in trying to produce an integrated ECG "device."

  3. Contamination and risk assessment of metals in road-deposited sediments in a medium-sized city of China.

    PubMed

    Bian, Bo; Lin, Cheng; Wu, Hai suo

    2015-02-01

    Road-deposited sediment (RDS) is a valuable environmental medium for characterizing contamination of metals in urban areas and the associated risks to human health. A total of 62 RDS samples were collected for metal test in four urban areas in a medium size city in eastern China. The areas that represented different land uses consisted of intense traffic area (ITA), commercial area (CA), residential area (RA), and riverside park area (RPA). The effects of particle size and different land uses on metal contamination and health risk were the major focus in this study. The test results showed that RDS in ITA appeared to have higher metal content, enrichment factor (EF), ecological risk index (RI), and the non-cancer and cancer risks than in the other areas. The metal contamination and health risk increased inversely with particle size. The particles less than 63 μm were found to be most critical in development of metal contamination and health risk. The EF was measured to be greater than 2.0 in the four areas, indicating a moderate enrichment. The measured RI ranged between 50 and 200, indicating considerable to moderate risks. The non-cancer risk for children was high in the four areas but was low for adults in all test areas except in ITA. The cancer risk of Cr for children was high in all test areas. Based on the test results, the contamination control and management for metals in RDS shall focus on the effects from such factors as particles (<63 μm) and the land use for intense traffic (ITA).

  4. Lumbar vertebral body bone microstructural scaling in small to medium-sized strepsirhines.

    PubMed

    Fajardo, Roberto J; Desilva, Jeremy M; Manoharan, Rajaram K; Schmitz, James E; Maclatchy, Laura M; Bouxsein, Mary L

    2013-02-01

    Bone mass, architecture, and tissue mineral density contribute to bone strength. As body mass (BM) increases any one or combination of these properties could change to maintain structural integrity. To better understand the structural origins of vertebral fragility and gain insight into the mechanisms that govern bone adaptation, we conducted an integrative analysis of bone mass and microarchitecture in the last lumbar vertebral body from nine strepsirhine species, ranging in size from 42 g (Microcebus rufus) to 2,440 g (Eulemur macaco). Bone mass and architecture were assessed via µCT for the whole body and spherical volumes of interest (VOI). Allometric equations were estimated and compared with predictions for geometric scaling, assuming axial compression as the dominant loading regime. Bone mass, microarchitectural, and vertebral body geometric variables predominantly scaled isometrically. Among structural variables, the degree of anisotropy (Tb.DA) was the only parameter independent of BM and other trabecular architectural variables. Tb.DA was related to positional behavior. Orthograde primates had higher average Tb.DA (1.60) and more craniocaudally oriented trabeculae while lorisines had the lowest Tb.DA (1.25), as well as variably oriented trabeculae. Finally, lorisines had the highest ratio of trabecular bone volume to cortical shell volume (∼3x) and while there appears to be flexibility in this ratio, the total bone volume (trabecular + cortical) scales isometrically (BM(1.23) , r(2) = 0.93) and appears tightly constrained. The common pattern of isometry in our measurements leaves open the question of how vertebral bodies in strepsirhine species compensate for increased BM. PMID:23355518

  5. Total approach is a must for small and medium enterprises to attain sustainable working conditions and environment, with special reference to Bali, Indonesia.

    PubMed

    Manuaba, Adnyana

    2006-01-01

    Attention and assistance to enhance the role of small and medium scale enterprises (SMEs) by the government is more emphasized due to the success of SMEs in earning significant amount of foreign currency when Indonesia had to face economical crisis in 1997. This policy has been highly recognized again since the bombing tragedy in 2002; with the excellent evidence to show how important SMEs is in helping and maintaining the economic development of Bali. But in the implementation the assistance needs to be remanaged again in a more proper and appropriate way to attain the ultimate goals. The three economic potentials, agriculture in broad sense, tourism and SMEs (cottage industry included), must be developed in harmony, interdependence, support and complementary each other, if possible as synergist to obtain sustainable development of Bali. While assistance to SMEs must be done in a more coordinated way among the government technical offices, universities, NGOs, banking, and other social community institutions. By doing so, there would be no duplication or gap, nor creation of new disadvantageous problems. It could be in form of ergonomics, occupational health and safety impacts and problems in particular, and in adverse working conditions and environment in general. Therefore it is a must at this moment to carry out total approach in helping SMEs, by integrating the effort to improve their working conditions and environment, built-in within the effort to enhance SMEs'quality of life through economic assistance. In this process a total approach through SHIP approach and Appropriate Technology intervention must be done wisely and timely. By so doing, SMEs'sustainable working conditions and environment shall be attained.

  6. Total approach is a must for small and medium enterprises to attain sustainable working conditions and environment, with special reference to Bali, Indonesia.

    PubMed

    Manuaba, Adnyana

    2006-01-01

    Attention and assistance to enhance the role of small and medium scale enterprises (SMEs) by the government is more emphasized due to the success of SMEs in earning significant amount of foreign currency when Indonesia had to face economical crisis in 1997. This policy has been highly recognized again since the bombing tragedy in 2002; with the excellent evidence to show how important SMEs is in helping and maintaining the economic development of Bali. But in the implementation the assistance needs to be remanaged again in a more proper and appropriate way to attain the ultimate goals. The three economic potentials, agriculture in broad sense, tourism and SMEs (cottage industry included), must be developed in harmony, interdependence, support and complementary each other, if possible as synergist to obtain sustainable development of Bali. While assistance to SMEs must be done in a more coordinated way among the government technical offices, universities, NGOs, banking, and other social community institutions. By doing so, there would be no duplication or gap, nor creation of new disadvantageous problems. It could be in form of ergonomics, occupational health and safety impacts and problems in particular, and in adverse working conditions and environment in general. Therefore it is a must at this moment to carry out total approach in helping SMEs, by integrating the effort to improve their working conditions and environment, built-in within the effort to enhance SMEs'quality of life through economic assistance. In this process a total approach through SHIP approach and Appropriate Technology intervention must be done wisely and timely. By so doing, SMEs'sustainable working conditions and environment shall be attained. PMID:16610528

  7. Graben on the Floors of Mercury's Medium-Sized Impact Basins: Extension from Cooling

    NASA Astrophysics Data System (ADS)

    Blair, D. M.; Freed, A. M.; Melosh, H. J.; Solomon, S. C.; Prockter, L. M.; Watters, T. R.; Zuber, M. T.

    2011-12-01

    Images taken by the MESSENGER spacecraft reveal a variety of faulting styles on the floors of major impact basins on Mercury. Two of the best-preserved peak-ring basins, Raditladi and Rachmaninoff (diameter D ~ 265 and 290 km) display predominantly circumferentially oriented graben on the floors within their peak rings. Similar graben are seen in Schrödinger basin on the Moon (D ~ 312 km), though the distribution and orientation of graben differ. This faulting style is not observed within much larger (D > 1000 km) impact basins on the Moon, where faulting is likely related to lithospheric flexure caused by subsidence of volcanic loads within the basin. In the Caloris basin on Mercury (D ~ 1500 km), extensional faulting is generally inferred to be related to uplift in response to different phases of exterior volcanic loading or lateral crustal flow. The smaller sizes of the Raditladi and Rachmaninoff basins combined with the absence of graben outside their peak rings make these mechanism unlikely to explain the observed faulting. Moreover, whereas the smooth plains inside the peak ring of Rachmaninoff basin appear to be volcanic in nature, the plains within Raditladi basin are not resolvably younger than the basin and may consist of solidified impact melt. Thus, any mechanism proposed to explain the origin of graben in these basins must apply to either floor material. Here we use thermo-mechanical finite element models to calculate the stress states resulting from several candidate mechanisms for graben formation. Models of subsidence associated with the emplacement of interior fill as well as those of uplift associated with undercompensated basin topography do not lead to the required stress state. We also explore the idea that porous breccias beneath the smooth plains are heated by impact melt or volcanic fill and undergo viscous compaction, causing subsidence of the fill material. In combination with interior filling by plains that thin outward, this mechanism

  8. Development of Proof-of-Concept Units for the Advanced Medium-Sized Mobile Power Sources (AMMPS) Program

    SciTech Connect

    Andriulli, JB

    2002-04-03

    The purpose of this report is to document the development of the proof-of-concept units within the Advanced Medium-sized Mobile Power Sources (AMMPS) program. The design used a small, lightweight diesel engine, a permanent magnet alternator, power electronics and digital controls as outlined in the philosophy detailed previously. One small proof-of-concept unit was completed and delivered to the military. The unit functioned well but was not optimized at the time of delivery to the military. A tremendous amount of experience was gained during this phase that can be used in the development of any follow-on AMMPS production systems. Lessons learned and recommendations for follow-on specifications are provided. The unit demonstrated that significant benefits are possible with the new design philosophy. Trade-offs will have to be made but many of the advantages appear to be within the technical grasp of the market.

  9. Environmental Management in Small and Medium-Sized Companies: An Analysis from the Perspective of the Theory of Planned Behavior

    PubMed Central

    Sánchez-Medina, Agustín J.; Romero-Quintero, Leonardo; Sosa-Cabrera, Silvia

    2014-01-01

    In the business context, concern for the environment began to develop when pressure from the public administration and environmental awareness groups raised the specific requirements for companies. The Theory of Planned Behavior considers that people's conduct is determined by the intention of carrying out a certain behavior. Thus, the individual's intent is determined by three factors related to the desired outcome of the behavior: the Personal Attitude toward the Results, the Perceived Social Norms, and the Perceived Behavioral Control over the action. Therefore, the objectives of this paper are to clarify the attitudes of the managers of Canarian small and medium-sized companies about taking environmental measures, and try to demonstrate whether there is a relationship between the proposed factors and the intention to take these measures. PMID:24533094

  10. Size-dependent thermal stability analysis of graded piezomagnetic nanoplates on elastic medium subjected to various thermal environments

    NASA Astrophysics Data System (ADS)

    Ebrahimi, Farzad; Barati, Mohammad Reza

    2016-10-01

    This paper investigates the thermal stability of magneto-electro-thermo-elastic functionally graded (METE-FG) nanoplates based on the nonlocal theory and a refined plate model. The METE-FG nanoplate is subjected to the external electric potential, magnetic potential and different temperature rises. Interaction of elastic medium with the METE-FG nanoplate is modeled via Winkler-Pasternak foundation model. The governing equations are derived by using the Hamilton principle and solved by using an analytical method to determine the critical buckling temperatures. To verify the validity of the developed model, the results of the present work are compared with those available in the literature. A detailed parametric study is conducted to study the influences of the nonlocal parameter, foundation parameters, temperature rise, external electric and magnetic potentials on the size-dependent thermal buckling characteristics of METE-FG nanoplates.

  11. Quantum chemical study of the electronic properties of an Iridium-based photosensitizer bound to medium-sized silver clusters

    NASA Astrophysics Data System (ADS)

    Bokareva, Olga S.; Kühn, Oliver

    2015-08-01

    The equilibrium structures and electronic excitation spectra of the Ir(III) photosensitizer [Ir(ppy)2(bpy)]+ bound to medium-sized silver clusters Agn (n = 19, 20) are investigated using time-dependent density functional theory. The long-range corrected LC-BLYP approach is used with a system-specific range separation parameter. The weak physisorption of the hybrid complexes yields only small changes in the broadened absorption spectra of the hybrid system as compared with its constituents. However, the density of states as well as the fine structure of the spectra is strongly modified upon complexation. It is shown that the standard range separation parameter (0.47 bohr-1) cannot predict these properties correctly and the optimized value of 0.16 bohr-1 should be used instead.

  12. Social participation among older adults living in medium-sized cities in Belgium: the role of neighbourhood perceptions.

    PubMed

    Buffel, Tine; De Donder, Liesbeth; Phillipson, Chris; Dury, Sarah; De Witte, Nico; Verté, Dominique

    2014-12-01

    This study examines the associations between neighbourhood perceptions and social participation in a sample of older adults living in medium-sized cities in Flanders, Belgium. Strong evidence of the influence of place on older people's physical and mental health exists. However, the question of how neighbourhoods promote or hinder social participation remains under-explored in social gerontology. Using data generated from the Belgian Ageing Studies, a multivariate regression model (n = 1877) is tested, with personal characteristics, subjective neighbourhood assessments and objective city-level measures as independent variables, and two indicators of social participation as dependent variables: social activity and formal participation. Positive predictors included neighbourhood involvement, frequent contact with neighbours and availability of activities for older people. However, the predictive role of neighbourhood perceptions is stronger for formal participation than for social activity, which is explained more by individual characteristics. The article concludes by discussing the implications of the findings for research and practice pertaining to health promotion interventions.

  13. Environmental management in small and medium-sized companies: an analysis from the perspective of the theory of planned behavior.

    PubMed

    Sánchez-Medina, Agustín J; Romero-Quintero, Leonardo; Sosa-Cabrera, Silvia

    2014-01-01

    In the business context, concern for the environment began to develop when pressure from the public administration and environmental awareness groups raised the specific requirements for companies. The Theory of Planned Behavior considers that people's conduct is determined by the intention of carrying out a certain behavior. Thus, the individual's intent is determined by three factors related to the desired outcome of the behavior: the Personal Attitude toward the Results, the Perceived Social Norms, and the Perceived Behavioral Control over the action. Therefore, the objectives of this paper are to clarify the attitudes of the managers of Canarian small and medium-sized companies about taking environmental measures, and try to demonstrate whether there is a relationship between the proposed factors and the intention to take these measures. PMID:24533094

  14. Comparison of the reservoir competence of medium-sized mammals and Peromyscus leucopus for Anaplasma phagocytophilum in Connecticut.

    PubMed

    Levin, Michael L; Nicholson, William L; Massung, Robert F; Sumner, John W; Fish, Durland

    2002-01-01

    In the northeastern United States, Anaplasma phagocytophilum, the agent of human granulocytic ehrlichiosis (HGE), is transmitted by the tick vector Ixodes scapularis. The white-footed mouse Peromyscus leucopus is a competent reservoir for this agent, but the reservoir competence of non-Peromyscus hosts of I. scapularis has not been studied. Here, we report data confirming reservoir competence of medium-sized mammals for A. phagocytophilum. Raccoons, Virginia opossums, gray squirrels, and striped skunks were live-trapped in June-August of 1998-1999 at two locations in Connecticut. Captured animals were kept for several days at the laboratory in wire-mesh cages over water to allow naturally attached ticks to drop off. Samples of blood and serum were taken from each animal prior to its release at the site of capture. Engorged ticks collected from each animal were allowed to molt. Resulting I. scapularis nymphs and adults were tested for the presence of A. phagocytophilum DNA by polymerase chain reaction, as were the blood samples from the animals. A. phagocytophilum DNA was detected in the blood of >10% of the raccoons tested. Raccoons, opossums, squirrels, and skunks produced adult I. scapularis infected with the agent of HGE. Prevalence of infection was the highest in adult ticks fed as nymphs upon raccoons (23%) and the lowest in those fed upon skunks and opossums (5-7%). The agent was present in nymphal I. scapularis fed as larvae upon raccoons and squirrels, but not in ticks fed upon skunks or opossums. We also tested the ability of I. scapularis to transmit A. phagocytophilum to laboratory-reared white-footed mice after acquiring it from medium-sized mammals. Ticks that acquired the agent from raccoons and squirrels successfully transmitted it to mice. Thus, raccoons and gray squirrels are reservoir-competent for the agent of HGE-they become naturally infected, and are capable of transmitting the infection to feeding ticks.

  15. Enterprise Training in Australia. Final Report.

    ERIC Educational Resources Information Center

    Hayton, Geoff; McIntyre, John; Sweet, Richard; McDonald, Rod; Noble, Charles; Smith, Andrew; Roberts, Paul

    In the second phase of a two-phase study, enterprise training in Australia was examined through case studies of training at 12 Australian enterprises in 2 sectors. The six finance and insurance enterprises and six retail enterprises studied were selected to obtain a sample that was representative from the standpoints of enterprise size and…

  16. Development of the ACS+OPC UA based control system for a CTA medium size telescope prototype

    NASA Astrophysics Data System (ADS)

    Behera, Bagmeet; Oya, Igor; Birsin, Emrah; Köppel, Hendryk; Melkumyan, David; Schlenstedt, Stefan; Schmidt, Torsten; Schwanke, Ullrich; Wegner, Peter; Wiesand, Stephan; Winde, Michael

    2012-09-01

    The Cherenkov Telescope Array (CTA) is the next generation Very High Energy (VHE, defined as > 50GeV to several 100TeV) telescope facility, currently in the design and prototyping phase, and expected to come on-line around 2016. The array would have both a Northern and Southern hemisphere site, together delivering nearly complete sky coverage. The CTA array is planned to have ~100 telescopes of several different sizes to fulfill the sensitivity and energy coverage needs. Each telescope has a number of subsystems with varied hardware and control mechanisms; a drive system that gets commands and inputs via OPC UA (OPC Unified Architecture), mirror alignment systems based on XBee/ZigBee protocol and/or CAN bus, weather monitor accessed via serial/Ethernet ports, CCD cameras for calibration, Cherenkov camera, and the data read out electronics, etc. Integrating the control and data-acquisitions of such a distributed heterogeneous system calls for a framework that can handle such a multi-platform, multi-protocol scenario. The CORBA based ALMA Common software satisfies these needs very well and is currently being evaluated as the base software for developing the control system for CTA. A prototype for a Medium Size Telescope (MST, ~12m) is being developed and will be deployed in Berlin, by end of 2012. We present the development being carried out to integrate and control the various hardware subsystems of this MST prototype using ACS.

  17. On the variational computation of a large number of vibrational energy levels and wave functions for medium-sized molecules

    NASA Astrophysics Data System (ADS)

    Mátyus, Edit; Šimunek, Ján; Császár, Attila G.

    2009-08-01

    In a recent publication [J. Chem. Phys. 127, 084102 (2007)], the nearly variational DEWE approach (DEWE denotes Discrete variable representation of the Watson Hamiltonian using the Eckart frame and an Exact inclusion of a potential energy surface expressed in arbitrarily chosen coordinates) was developed to compute a large number of (ro)vibrational eigenpairs for medium-sized semirigid molecules having a single well-defined minimum. In this publication, memory, CPU, and hard disk usage requirements of DEWE, and thus of any DEWE-type approach, are carefully considered, analyzed, and optimized. Particular attention is paid to the sparse matrix-vector multiplication, the most expensive part of the computation, and to rate-determining steps in the iterative Lanczos eigensolver, including spectral transformation, reorthogonalization, and restart of the iteration. Algorithmic improvements are discussed in considerable detail. Numerical results are presented for the vibrational band origins of the C12H4 and C12H2D2 isotopologues of the methane molecule. The largest matrix handled on a personal computer during these computations is of the size of (4•108)×(4•108). The best strategy for determining vibrational eigenpairs depends largely on the actual details of the required computation. Nevertheless, for a usual scenario requiring a large number of the lowest eigenpairs of the Hamiltonian matrix the combination of the thick-restart Lanczos method, shift-fold filtering, and periodic reorthogonalization appears to result in the computationally most feasible approach.

  18. Feeding a medium size PAFC generator with hydrogen obtained by the fermentation of biomasses: A preliminary analysis

    SciTech Connect

    Ascoli, A.; Palumbo, P.; Sorlini, C.; Fancellu, G.

    1997-07-01

    The largest (1.3 MW nominal power) fuel cell generator in Europe is now under test at the Bicocca plant of Aem, the Milan Municipality Energy Utility. It is a phosphoric acid fuel cell (PAFC) generator, fed by pipeline methane through a reformer, and grid connected through an inverter. PAFC generators in general can also be fed, through a reformer, by a methane-rich biogas, obtained by the anaerobic digestion of a biomass. The yields of the microbiological treatment of cheese whey utilizing lactose-fermenting bacteria, capable to produce molecular hydrogen, have been tested in different conditions. The effective operation parameter of the Bicocca generator, experimentally observed during its initial test, have been used as the input data to analyze the possibility to feed medium-size PAFC generators by molecular H{sub 2} directly produced by the anaerobic fermentation of cheese whey. On the basis of this data, the actual size of the fermentor that would produce enough H{sub 2} to feed the Bicocca generator has been calculated. It has been also checked, on the basis of the same experimental data, that the entire cheese whey production of Lombardy and Emily regions could be fermented to produce the amount of H{sub 2} necessary to feed the Bicocca generator, leaving low-COD, easily disposable grey waters. This would also solve the problem of conditioning cheese whey for disposal, allowing substantial economies.

  19. Effect of grid size in RCMs on the representation of floods in small and medium sized catchments in Austria: added value of convection-permitting simulations

    NASA Astrophysics Data System (ADS)

    Reszler, Christian; Truhetz, Heimo; Switanek, Matthew

    2016-04-01

    This paper presents a small multi-model ensemble study of coupling two different ERA-Interim driven RCMs (WRF and COSMO-CLM) using different grid sizes (0.44°, 0.11°, 0.03°) with a hydrological model for representing floods in small to medium sized catchments in South-eastern Austria. The aim is to evaluate the benefit of grid size reduction and in particular, the added value of convection-permitting simulations with 0.03° (~ 3 km) resolution. The hydrological model is a spatially distributed model (1 km² grid), which was previously developed for operational flood forecasting and calibrated against data of more than 20 stream gauges with corresponding catchment sizes between 30 and 1000 km². The hindcast simulations (1989-2010) are evaluated in terms of accurately representing flood frequency, seasonality, as well as other flood event characteristics, such as weather type, antecedent soil moisture, etc. The results show, that for small catchments (< 200 km²) a resolution of 3 km is essential to accurately simulate the magnitude of flood events. Flood frequency and seasonality is represented well in all catchments. In the larger catchments a resolution of 0.11° (~ 12.5 km) already yields statistically satisfying results. Also, due to the short response times in the small sub-catchments a time step of 1 hour is required. However, in all setups a bias still exists in precipitation and temperature, which sometimes leads to unrealistic hydrological conditions. Ongoing work comprises the test a of novel statistical error correction method, which is expected to improve results particularly for higher quantiles. Also, a future run ("time-slice" experiment) is planned with the coupled model setup using the RCP8.5 emission scenario, the GCM of the Max-Planck-Institute Hamburg (MPI-ESM-LR), dynamically downscaled to 3 km by COSMO-CLM, and the novel error correction method. The study is funded by the Austrian Klima- und Energiefonds through the Austrian Climate

  20. Enabler for the agile virtual enterprise

    NASA Astrophysics Data System (ADS)

    Fuerst, Karl; Schmidt, Thomas; Wippel, Gerald

    2001-10-01

    In this presentation, a new approach for a flexible low-cost Internet extended enterprise (project FLoCI-EE) will be presented. FLoCI-EE is a project in the fifth framework program of the European commission with 8 partners from 4 countries, which started in January 2001 and will be finished in December 2003. The main objective of FLoCI-EE is the development of a software prototype, which enables flexible enterprise cooperation with the aim to design, manufacture and sell products commonly, independent of enterprise borderlines. The needed IT-support includes functions of product data management (PDM), enterprise resource planning (ERP), supply chain management (SCM) and customer relationship management (CRM). Especially for small and medium sized enterprises, existing solutions are too expensive and inflexible to be of use under current turbulent market conditions. The second part of this paper covers the item Web Services, because in the role-specific support approach of FLoCI-EE, there are user- interface-components, which are tailored for specific roles in an enterprise. These components integrate automatically the services of the so-called basic-components, and the externally offered Web Services like UDDI.

  1. Examinations on the Meteorologic Factors of Urban Heat Island Development in Small and Medium-sized Towns of Hungary

    NASA Astrophysics Data System (ADS)

    Szegedi, S.; Gyarmati, R.; Kapocska, L.; Toth, T.

    2010-09-01

    EXAMINATIONS ON THE METEOROLOGICAL FACTORS OF URBAN HEAT ISLAND DEVELOPMENT IN SMALL AND MEDIUM-SIZED TOWNS OF HUNGARY Sandor Szegedi, Renata Gyarmati, Laszlo Kapocska and Tamas Toth University of Debrecen Department of Meteorology, 4032 Debrecen Egyetem tér 1. The thermal difference between the settlements and their environment is called urban heat island (UHI). Potential UHI intensities are mainly determined by the size, population and built-up structure of settlements. Meteorological conditions have a determinant impact on the development of the heat island at a certain moment. International and Hungarian studies usually deal with metropolises and big cities; much less attention is paid to medium-sized and small towns. Consequently this study has been focused on the development of UHI in such Hungarian urbanized areas as mentioned above. Settlements, located near the city of Debrecen (ca. 220,000 inhabitants) in East Hungary, with population of about 30000, 20000 10000 and 1000 were chosen for the research. Car-mounted digital thermometers with data loggers were used. Twenty four measurements were carried out during a one-year-long campaign in 2003-2004. Synoptic conditions, especially cloudiness, wind direction and wind speed were taken to consideration as determinant factors. Spatial characteristics of UHI have been described. Results have proved the existence of UHI even in the smallest settlement under suitable weather conditions. The non-heating season proved to be more advantageous for the development of UHI due to stronger irradiance and frequent anticyclonic synoptic conditions. Effects of cloudiness and wind speed have been revealed as well. St type clouds have proved to be most effective in preventing the formation of UHI. A 90-100% St cover could completely eliminate the thermal differences between natural and artificial surfaces. Ci type clouds had the weakest impact, they could prevent the formation of the heat island only in the smallest

  2. Impact of Platelet-Rich Plasma on Arthroscopic Repair of Small- to Medium-Sized Rotator Cuff Tears

    PubMed Central

    Holtby, Richard; Christakis, Monique; Maman, Eran; MacDermid, Joy C.; Dwyer, Tim; Athwal, George S.; Faber, Kenneth; Theodoropoulos, John; Woodhouse, Linda J.; Razmjou, Helen

    2016-01-01

    Background: Increased interest in using platelet-rich plasma (PRP) as an augment to rotator cuff repair warrants further investigation, particularly in smaller rotator cuff tears. Purpose: To examine the effectiveness of PRP application in improving perioperative pain and function and promoting healing at 6 months after arthroscopic repair of small- or medium-sized rotator cuff tears. Study Design: Randomized controlled trial; Level of evidence, 1. Methods: This was a double-blinded randomized controlled trial of patients undergoing arthroscopic repair of partial- or full-thickness rotator cuff tears of up to 3 cm who were observed for 6 months. Patients were randomized to either repair and PRP application (study group) or repair only (control group) groups. The patient-oriented outcome measures utilized were the visual analog scale (VAS), the Short Western Ontario Rotator Cuff Index (ShortWORC), the American Shoulder and Elbow Surgeons (ASES) form, and the Constant-Murley Score (CMS). Range of motion (ROM) and inflammatory and coagulation markers were measured before and after surgery. Magnetic resonance imaging was used at 6 months to assess retear and fatty infiltration rate. Results: Eighty-two patients (41 males) with a mean age of 59 ± 8 years were enrolled; 41 patients were included in each group. Both the PRP and control groups showed a significant improvement in their pain level based on the VAS within the first 30 days (P < .0001), with the PRP group reporting less pain than the control group (P = .012), which was clinically significantly different from days 8 through 11. The PRP group reported taking less painkillers (P = .026) than the control group within the first 30 days. All outcome measure scores and ROM improved significantly after surgery (P < .0001), with no between-group differences. No differences were observed between groups in inflammatory or coagulation marker test results (P > .05), retear (14% vs 18% full retear; P = .44), or fatty

  3. Impact of Platelet-Rich Plasma on Arthroscopic Repair of Small- to Medium-Sized Rotator Cuff Tears

    PubMed Central

    Holtby, Richard; Christakis, Monique; Maman, Eran; MacDermid, Joy C.; Dwyer, Tim; Athwal, George S.; Faber, Kenneth; Theodoropoulos, John; Woodhouse, Linda J.; Razmjou, Helen

    2016-01-01

    Background: Increased interest in using platelet-rich plasma (PRP) as an augment to rotator cuff repair warrants further investigation, particularly in smaller rotator cuff tears. Purpose: To examine the effectiveness of PRP application in improving perioperative pain and function and promoting healing at 6 months after arthroscopic repair of small- or medium-sized rotator cuff tears. Study Design: Randomized controlled trial; Level of evidence, 1. Methods: This was a double-blinded randomized controlled trial of patients undergoing arthroscopic repair of partial- or full-thickness rotator cuff tears of up to 3 cm who were observed for 6 months. Patients were randomized to either repair and PRP application (study group) or repair only (control group) groups. The patient-oriented outcome measures utilized were the visual analog scale (VAS), the Short Western Ontario Rotator Cuff Index (ShortWORC), the American Shoulder and Elbow Surgeons (ASES) form, and the Constant-Murley Score (CMS). Range of motion (ROM) and inflammatory and coagulation markers were measured before and after surgery. Magnetic resonance imaging was used at 6 months to assess retear and fatty infiltration rate. Results: Eighty-two patients (41 males) with a mean age of 59 ± 8 years were enrolled; 41 patients were included in each group. Both the PRP and control groups showed a significant improvement in their pain level based on the VAS within the first 30 days (P < .0001), with the PRP group reporting less pain than the control group (P = .012), which was clinically significantly different from days 8 through 11. The PRP group reported taking less painkillers (P = .026) than the control group within the first 30 days. All outcome measure scores and ROM improved significantly after surgery (P < .0001), with no between-group differences. No differences were observed between groups in inflammatory or coagulation marker test results (P > .05), retear (14% vs 18% full retear; P = .44), or fatty

  4. Percutaneous Ethanol Injection of Unresectable Medium-to-Large-Sized Hepatomas Using a Multipronged Needle: Efficacy and Safety

    SciTech Connect

    Ho, C.S. Kachura, J.R.; Gallinger, S.; Grant, D.; Greig, P.; McGilvray, I.; Knox, J.; Sherman, M.; Wong, F.; Wong, D.

    2007-04-15

    Fine needles with an end hole or multiple side holes have traditionally been used for percutaneous ethanol injection (PEI) of hepatomas. This study retrospectively evaluates the safety and efficacy of PEI of unresectable medium-to-large (3.5-9 cm) hepatomas using a multipronged needle and with conscious sedation. Twelve patients, eight men and four women (age 51-77 years; mean: 69) received PEI for hepatomas, mostly subcapsular or exophytic in location with average tumor size of 5.6 cm (range: 3.5-9.0 cm). Patients were consciously sedated and an 18G retractable multipronged needle (Quadrafuse needle; Rex Medical, Philadelphia, PA) was used for injection under real-time ultrasound guidance. By varying the length of the prongs and rotating the needle, the alcohol was widely distributed within the tumor. The progress of ablation was monitored by contrast-enhanced ultrasound, computed tomography (CT) or magnetic resonance imaging (MRI) after each weekly injection and within a month after the final (third) injection and 3 months thereafter. An average total of 63 mL (range: 20-154 ml) of alcohol was injected per patient in an average of 2.3 sessions. Contrast-enhanced CT, ultrasound, or MRI was used to determine the degree of necrosis. Complete necrosis was noted in eight patients (67%), near-complete necrosis (90-99%) in two (16.7%), and partial success (50-89%) in two (16.7%). Follow-up in the first 9 months showed local recurrence in two patients and new lesions in another. There was no mortality. One patient developed renal failure, liver failure, and localized perforation of the stomach. He responded to medical treatment and surgery was not required for the perforation. One patient had severe postprocedural abdominal pain and fever, and another had transient hyperbilirubinemia; both recovered with conservative treatment. PEI with a multipronged needle is a new, safe, and efficacious method in treating medium-to-large-sized hepatocellular carcinoma under conscious

  5. Development of potential ecological niches in impact-induced hydrothermal systems: The small-to-medium size impacts

    NASA Astrophysics Data System (ADS)

    Versh, Evelin; Kirsimäe, Kalle; Jõeleht, Argo

    2006-12-01

    Effect of meteorite impact on the biological evolution is usually considered by its catastrophic consequences. However, the impacts can create opportunity for other organisms and the structures themselves can serve as suitable ecological niches (oases) for life. In this contribution we present results of modeling of an impact-induced hydrothermal (IHT) system in a small-to-medium sized impact crater, where the development of zones habitable for primitive hydrothermal thermophilic and hypethermophilic microorganisms was studied. The impact and geothermal modeling was verified against the 4-km diameter Kärdla complex structure, Hiiumaa Island, Estonia. If there is an sufficient amount of water present in the target (e.g., sea cover, groundwater or permafrost resources) then the differential temperature fields created by the impact initiate a hydrothermal circulation system within the crater. The results of transient fluid flow and heat transfer simulations in Kärdla suggest that immediately after impact the temperatures in the central area, which contains the most hydrothermal alteration, were well above the boiling point. However, due to efficient heat loss at the groundwater vaporization front, the vapor-dominated area disappears within a few decades. In the central uplift area, the conditions favorable for thermophilic microorganisms (temperatures <100 °C) were reached in 500-1000 years after the impact. The overall cooling to ambient temperatures in the deeper parts of the central uplift lasted for thousands of years. In the crater depression and rim area the initial temperatures, suggested by the impact modeling, were much lower - from 150 °C to ambient temperatures, except locally in fracture zones and suevite pockets. Our data suggest that in small-to-medium size impact craters with insignificant melting, the suitable conditions for hydrothermal microbial communities are established shortly (tens to few hundreds of years as maximum) after the impact in

  6. Preliminary Design Study of Medium Sized Gas Cooled Fast Reactor with Natural Uranium as Fuel Cycle Input

    NASA Astrophysics Data System (ADS)

    Meriyanti, Su'ud, Zaki; Rijal, K.; Zuhair, Ferhat, A.; Sekimoto, H.

    2010-06-01

    In this study a fesibility design study of medium sized (1000 MWt) gas cooled fast reactors which can utilize natural uranium as fuel cycle input has been conducted. Gas Cooled Fast Reactor (GFR) is among six types of Generation IV Nuclear Power Plants. GFR with its hard neuron spectrum is superior for closed fuel cycle, and its ability to be operated in high temperature (850° C) makes various options of utilizations become possible. To obtain the capability of consuming natural uranium as fuel cycle input, modified CANDLE burn-up scheme[1-6] is adopted this GFR system by dividing the core into 10 parts of equal volume axially. Due to the limitation of thermal hydraulic aspects, the average power density of the proposed design is selected about 70 W/cc. As an optimization results, a design of 1000 MWt reactors which can be operated 10 years without refueling and fuel shuffling and just need natural uranium as fuel cycle input is discussed. The average discharge burn-up is about 280 GWd/ton HM. Enough margin for criticallity was obtained for this reactor.

  7. Small-scale capture, transport and tank adaptation of live, medium-sized Scombrids using "Tuna Tubes".

    PubMed

    Bar, Ido; Dutney, Luke; Lee, Peter; Yazawa, Ryosuke; Yoshizaki, Goro; Takeuchi, Yutaka; Cummins, Scott; Elizur, Abigail

    2015-01-01

    The transport of live fish is a crucial step to establish fish culture in captivity, and is especially challenging for species that have not been commonly cultured before, therefore transport and handling methods need to be optimized and tailored. This study describes the use of tuna tubes for small-scale transport of medium-sized pelagic fish from the Scombridae family. Tuna tubes are an array of vertical tubes that hold the fish, while fresh seawater is pumped up the tubes and through the fish mouth and gills, providing oxygen and removing wastes. In this study, 19 fish were captured using rod and line and 42 % of the captured fish were transported alive in the custom-designed tuna tubes to an on-shore holding tank: five mackerel tuna (Euthynnus affinis) and three leaping bonito (Cybiosarda elegans). Out of these, just three (15.8 % of total fish) acclimatized to the tank's condition. Based on these results, we discuss an improved design of the tuna tubes that has the potential to increase survival rates and enable a simple and low cost method of transporting of live pelagic fish. PMID:26543739

  8. Uncertainties of Completeness Measures in Openstreetmap - a Case Study for Buildings in a Medium-Sized German City

    NASA Astrophysics Data System (ADS)

    Törnros, T.; Dorn, H.; Hahmann, S.; Zipf, A.

    2015-08-01

    The completeness of buildings in OpenStreetMap (OSM) is estimated for a medium-sized German city and its surroundings by comparing the OSM data with data from an official building cadastre. As completeness measures we apply two unit-based methods that are frequently applied in similar studies. It is found that the estimation of OSM building completeness strongly differ between the methods. A count ratio (number of OSM buildings / number of reference buildings) tends to underestimate the actual building completeness and an area ratio (total OSM building area / total reference building area) instead tends to overestimate the completeness within the study area. It is argued that a simple pre-processing of the building footprint polygons leads to a more accurate completeness estimation when applying the count ratio. It is also suggested to more carefully examine the areas that have been mapped in OSM but not in the reference data set (false positives). In the present study region, these values are mainly due to simplified OSM polygons and they contribute to an overestimation of the OSM building completeness when applying the area ratio.

  9. L-Phosphinothricin modulation of inwardly rectifying K(+) channels increased excitability in striatal medium-sized spiny neurons.

    PubMed

    Domingos, Laetitia; Desrus, Agnès; Même, Sandra; Même, William

    2016-07-01

    Phosphinotricin (L-PPT) is the active compound of a broad-spectrum herbicide. Acute poisoning with L-PPT has various clinical manifestations, including seizures and convulsions. However, the exact mechanism of L-PPT toxicity remains unclear. The present study addressed the role of L-PPT, in the excitability of striatal medium-sized spiny neurons (MSNs). In whole-cell current-clamp experiments, L-PPT increased the input resistance (Ri), decreased the rheobase and increased the firing frequency of action potentials. In voltage-clamp experiments, L-PPT inhibited the inward-rectifying potassium (Kir) currents. Finally, the effects of L-PPT mimicked the inhibition of Kir channels with Ba(2+) on neuronal excitability. Altogether, these results suggest that the herbicide L-PPT is a modulator of Kir channels in MSNs. Thereby, Kir channels are potent regulators of the excitability of MSNs and reduced open probability of these channels would generate a powerful upregulation of neuronal output. This effect may represent a possible mechanism for L-PPT dependent neuronal toxicity. PMID:27136897

  10. Impact of local urban design and traffic restrictions on air quality in a medium-sized town.

    PubMed

    Acero, J A; Simon, A; Padro, A; Santa Coloma, O

    2012-01-01

    Traffic is the major air pollution source in most urban areas. Nowadays, most of the strategies carried out to improve urban air quality are focused on reducing traffic emissions. Nevertheless, acting locally on urban design can also reduce levels of air pollutants. In this paper, both strategies are studied in several scenarios for a medium-sized town of the Basque Country (Spain). Two main actions are analysed in order to reduce traffic emissions: (1) minor extension ofa pre-existing low emission zone (LEZ); (2) substitution of 10% of passenger cars that are older than 5 years by hybrid and electric vehicles. Regarding local urban design, three alternatives for the development of one side of a street canyon are considered: (1) a park with trees; (2) an open space without obstacles; (3) a building. Two different urban traffic dispersion models are used to calculate the air quality scenarios: PROKAS (Gaussian&box) to analyse the reduction of traffic emissions in the whole urban area and WinMISKAM (CFD) to evaluate specific urban designs. The results show the effectiveness of the analysed actions. On one hand, the definition of a small LEZ, as well as the introduction in 2015 of vehicles with new technology (hybrid and electric), results in minor impacts on PM10 and NO2 ambient concentrations. On the other hand, local urban design can cause significant variation in spatial distribution ofpollutant concentrations emitted inside street canyons. Consequently, urban planners should consider all these aspects when dealing with urban air pollution control.

  11. Ultrafine particle deposition to vegetation branches: wind tunnel investigation of the effect of canopy medium and particle size and charge

    NASA Astrophysics Data System (ADS)

    Khlystov, A.; Lin, M.; Katul, G. G.

    2012-12-01

    Ultrafine particles (UFP) have attracted much attention in recent years due to their influence on atmospheric concentrations of cloud condensation nuclei (CCN) and the consequent effect on cloud albedo and global climate. To understand UFP lifetime in the atmosphere, both sources and sinks need to be known. One important sink for UFP is removal by vegetation. The main collection mechanism by vegetation is Brownian diffusion with a possible contribution of electrostatic forces. Here we report measurements of collection efficiency of UFP by pine and juniper branches in a wind tunnel at different wind speeds, branch orientations, and packing densities. The effect of particle charge is also investigated. Two modeling approached have been developed to describe UFP deposition to vegetation branches. One treats vegetation as a fibrous filter with a characteristic fiber size; the other treats it as a random porous medium. The experiments agreed well with predictions from both models within 20%. Upon bridging these two modeling approaches, estimates of the effective fiber diameter can now be derived from conventional canopy attributes, such as the leaf area index. These results can benefit future air quality and climate models incorporating UFP.

  12. Preliminary Design Study of Medium Sized Gas Cooled Fast Reactor with Natural Uranium as Fuel Cycle Input

    SciTech Connect

    Meriyanti; Su'ud, Zaki; Rijal, K.; Zuhair; Ferhat, A.; Sekimoto, H.

    2010-06-22

    In this study a feasibility design study of medium sized (1000 MWt) gas cooled fast reactors which can utilize natural uranium as fuel cycle input has been conducted. Gas Cooled Fast Reactor (GFR) is among six types of Generation IV Nuclear Power Plants. GFR with its hard neuron spectrum is superior for closed fuel cycle, and its ability to be operated in high temperature (850 deg. C) makes various options of utilizations become possible. To obtain the capability of consuming natural uranium as fuel cycle input, modified CANDLE burn-up scheme[1-6] is adopted this GFR system by dividing the core into 10 parts of equal volume axially. Due to the limitation of thermal hydraulic aspects, the average power density of the proposed design is selected about 70 W/cc. As an optimization results, a design of 1000 MWt reactors which can be operated 10 years without refueling and fuel shuffling and just need natural uranium as fuel cycle input is discussed. The average discharge burn-up is about 280 GWd/ton HM. Enough margin for criticality was obtained for this reactor.

  13. Inferred Variable FeO Content in Medium-sized Lunar Pyroclastic Deposits from LRO Diviner Data

    NASA Technical Reports Server (NTRS)

    Bennett, K. A.; Horgan, B.; Greenhagen, B.; Allen, C.; Bell, J. F., III

    2014-01-01

    Lunar pyroclastic deposits (LPDs) are low albedo features that mantle underlying terrain (Gaddis et al. 1985). They are high priority targets for science and exploration as they are believed to originate from and therefore reflect the composition of the deep lunar interior (NRC, 2011). They are also the best potential resource of oxygen out of any Apollo samples (Allen et al. 1996). Historically, LPDs have been divided into regional versus local categories (Gaddis et al. 2003). The large (>1000 km2 area) regional deposits are deeply sourced (>400 km deep) and result from fire fountaining. Small (<1000 km2) local deposits are thought to result from Vulcanian eruptions in which magma is slowly emplaced beneath the surface until enough volatiles exsolve and the high pressure causes an explosion. Bennett et al. (2013) identified a local deposit (674 km2 area) that may have resulted from both Vulcanian activity and fire fountaining. This deposit potentially represents a new intermediate class of LPDs that straddles the interface between the two formation mechanisms. The deposit also exhibits the highest inferred FeO wt.% of any known lunar glass. In this work we investigate the inferred FeO abundances of other medium-sized deposits to characterize this potential new class of deposits and understand the magnitude of variations in inferred FeO among pyroclastic deposits. We use the method of Greenhagen et al. (2010) to calculate the wavelength of the Christiansen Feature (CF) from Lunar Reconnaissance Orbiter Diviner Lunar Radiometer instrument thermal-infrared observations for four medium-sized deposits. From the CF values, we estimate each deposit's FeO abundance using the method of Allen et al. (2012). The four LPDs that we examined (Oppenheimer South, Beer, Cleomedes, and J. Herschel) all have average CF values from 8.22-8.28 microns, corresponding to FeO abundances of approx. 10-15 wt.%. All of these values are within the range and uncertainties of FeO abundances

  14. The Role of Remote Sensing for Sustainable Elephant Management in South Africa. Four Medium Sized Game Reserves as Case Studies

    NASA Astrophysics Data System (ADS)

    Jordaan, M.

    2012-07-01

    Loxodonta africana (African Elephant) are running out of living space so the protection of what space they have is essential. Existing areas of suitable elephant habitat need to be protected not only from human development but from the elephants themselves. As most elephant populations in South Africa are enclosed and multiplying, there is some increasing cause for concern as the damage caused will escalate and could reach unsustainable proportions. This study examined the utilization of satellite images for the detection of elephant induced ecosystem modification. A pilot study was conducted on four medium sized Game Reserves (each ±30 000 ha) in South Africa. The aim was to ascertain the feasibility of using image analysis as instrument by which Game Reserve managers could assess biodiversity richness, habitat loss, and population-habitat viability. NDVI as indicator of primary production in vegetation is one of the instruments used to evaluate whether the carrying capacity for elephants of each Game Reserve has been reached and to compare the current biomass with those of previous years. The study also looked at the use of the woody canopy cover as target for change detection analysis. Spectral characteristics of specific trees species which are known for being preferred by elephants were used to conduct a temporal analysis on satellite images starting from the period when the elephants were re-introduced into each Game Reserve, thus attempting to identify possible impact on the biodiversity of the respective Game Reserves. Images from satellites such as Landsat, SPOT, Quickbird and SumbandilaSAT provided the needed data and maps.

  15. Impact of local urban design and traffic restrictions on air quality in a medium-sized town.

    PubMed

    Acero, J A; Simon, A; Padro, A; Santa Coloma, O

    2012-01-01

    Traffic is the major air pollution source in most urban areas. Nowadays, most of the strategies carried out to improve urban air quality are focused on reducing traffic emissions. Nevertheless, acting locally on urban design can also reduce levels of air pollutants. In this paper, both strategies are studied in several scenarios for a medium-sized town of the Basque Country (Spain). Two main actions are analysed in order to reduce traffic emissions: (1) minor extension ofa pre-existing low emission zone (LEZ); (2) substitution of 10% of passenger cars that are older than 5 years by hybrid and electric vehicles. Regarding local urban design, three alternatives for the development of one side of a street canyon are considered: (1) a park with trees; (2) an open space without obstacles; (3) a building. Two different urban traffic dispersion models are used to calculate the air quality scenarios: PROKAS (Gaussian&box) to analyse the reduction of traffic emissions in the whole urban area and WinMISKAM (CFD) to evaluate specific urban designs. The results show the effectiveness of the analysed actions. On one hand, the definition of a small LEZ, as well as the introduction in 2015 of vehicles with new technology (hybrid and electric), results in minor impacts on PM10 and NO2 ambient concentrations. On the other hand, local urban design can cause significant variation in spatial distribution ofpollutant concentrations emitted inside street canyons. Consequently, urban planners should consider all these aspects when dealing with urban air pollution control. PMID:23393990

  16. A passive DOAS instrument for trace gas measurements on medium sized UAS: Instrumental design and first measurements.

    NASA Astrophysics Data System (ADS)

    Horbanski, Martin; Pöhler, Denis; Mahr, Tobias; Wagner, Thomas; Keleshis, Christos; Ioannou, Stelios; Lange, Manfred A.; Lelieveld, Jos; Platt, Ulrich

    2013-04-01

    Unmanned Aerial Systems (UAS) are a new powerful tool for observations in the atmospheric boundary layer. Recent developments in measuring technology allow the construction of compact and sensitive active and passive DOAS instruments which can fit the space and weight constraints on UAS. This opens new possibilities for trace gas measurements in the lower troposphere, especially in areas which are not accessible to manned aviation e.g. volcanic plumes or which should be monitored regularly (e.g. industrial emissions of a stack). We present a new developed passive DOAS instrument for the APAESO Platform of the Cyprus Institute, a medium size UAS. It is equipped with two telescopes for observations in downward (nadir) and horizontal (limb) viewing direction, respectively. Thus it allows determining height profiles and the horizontal distribution of trace gases. This is accomplished by analyzing the radiation collected by the telescopes with compact spectrometers, which cover the UV-blue spectral range allowing to measure a broad variety of atmospheric trace gases (e.g. NO2, SO2, BrO, IO, H2O ...) as well as aerosol properties via O4 absorption. Additionally, the nadir direction is equipped with a VIS-NIR spectrometer. It is used to measure reflection spectra of different types of vegetation. These will serve as references for satellite measurements to create global maps. First measurements on the APAESO platform were performed in October 2012 on Cyprus in a rural area south of Nicosia. The instrument is shown to work reliably and was able to detect NO2, H2O and O4 at atmospheric column densities. The instrumental design and first measurements will be presented and discussed.

  17. Development of a Low NOx Medium sized Industrial Gas Turbine Operating on Hydrogen-Rich Renewable and Opportunity Fuels

    SciTech Connect

    Srinivasan, Ram

    2013-07-31

    This report presents the accomplishments at the completion of the DOE sponsored project (Contract # DE-FC26-09NT05873) undertaken by Solar Turbines Incorporated. The objective of this 54-month project was to develop a low NOx combustion system for a medium sized industrial gas turbine engine operating on Hydrogen-rich renewable and opportunity Fuels. The work in this project was focused on development of a combustion system sized for 15MW Titan 130 gas turbine engine based on design analysis and rig test results. Although detailed engine evaluation of the complete system is required prior to commercial application, those tasks were beyond the scope of this DOE sponsored project. The project tasks were organized in three stages, Stages 2 through 4. In Stage 2 of this project, Solar Turbines Incorporated characterized the low emission capability of current Titan 130 SoLoNOx fuel injector while operating on a matrix of fuel blends with varying Hydrogen concentration. The mapping in this phase was performed on a fuel injector designed for natural gas operation. Favorable test results were obtained in this phase on emissions and operability. However, the resulting fuel supply pressure needed to operate the engine with the lower Wobbe Index opportunity fuels would require additional gas compression, resulting in parasitic load and reduced thermal efficiency. In Stage 3, Solar characterized the pressure loss in the fuel injector and developed modifications to the fuel injection system through detailed network analysis. In this modification, only the fuel delivery flowpath was modified and the air-side of the injector and the premixing passages were not altered. The modified injector was fabricated and tested and verified to produce similar operability and emissions as the Stage 2 results. In parallel, Solar also fabricated a dual fuel capable injector with the same air-side flowpath to improve commercialization potential. This injector was also test verified to produce 15

  18. The Soviet Union and Eastern Europe: A Bibliographic Guide to Recommended Books for Small and Medium-Sized Libraries and School Media Centers.

    ERIC Educational Resources Information Center

    Horak, Stephan M.

    Intended to aid librarians in small- and medium-sized libraries and media centers, this annotated bibliography lists 1,555 books focusing on the Soviet Union and Eastern Europe. The book is divided into four parts: (1) "General and Interrelated Themes--Union of the Soviet Socialist Republics and Eastern European Countries"; (2) "Russian Empire…

  19. A Cost-Benefit Analysis of a Collections Inventory Project: A Statistical Analysis of Inventory Data from a Medium-Sized Academic Library

    ERIC Educational Resources Information Center

    Sung, Jan S.; Whisler, John A.; Sung, Nackil

    2009-01-01

    Using an electronic shelf-reading system a cost-benefit analysis was conducted of an inventory/shelf-reading project in a medium-sized academic library. Analyses include time spent, cataloging discrepancies, books found with active statuses, mis-shelving rate and distance, and subsequent use of found books. Correctly re-shelving "missing"…

  20. Energy efficiency in the US economy technical report four: Analysis of energy-efficiency investment decisions by small and medium-sized manufacturers

    SciTech Connect

    1996-03-01

    This report highlights the results of a comprehensive analysis of investment decisions regarding energy-efficiency measures at small and medium-sized manufacturing plants. The analysis is based primarily on the experiences of companies participating in the US Department of Energy`s Industrial Assessment Center (IAC) program.

  1. Use of High Spatial Resolution Remote Sensing for Hydro-Geomorphologic Analysis of Medium-sized Arid Basins

    NASA Astrophysics Data System (ADS)

    Sadeh, Yuval; Blumberg, Dan G.; Cohen, Hai; Morin, Efrat; Maman, Shimrit

    2016-04-01

    Arid environments are often remote, expansive, difficult to access and especially vulnerable to flash flood hazards due to the poor understanding of the phenomenon and the lack of meteorological, geomorphological, and hydrological data. For many years, catchment characteristics have been observed using point-based measurements such as rain gauges and soil sample analysis; on the other hand, use of remote sensing technologies can provide spatially continuous hydrological parameters and variables. The advances in remote sensing technologies can provide new geo-spatial data using high spatial and temporal resolution for basin-scale geomorphological analysis and hydrological models. This study used high spatial resolution remote sensing for hydro-geomorphologic analysis of the arid medium size Rahaf watershed (76 km2), located in the Judean Desert, Israel. During the research a high resolution geomorphological map of Rahaf basin was created using WorldView-2 multispectral satellite imageries; surface roughness was estimated using SIR-C and COSMO-SkyMed Synthetic Aperture Radar (SAR) spaceborne sensors; and rainstorm characteristics were extracted using ground-based meteorological radar. The geomorphological mapping of Rahaf into 17 classes with good accuracy. The surface roughness extraction using SAR over the basin showed that the correlation between the COSMO-SkyMed backscatter coefficient and the surface roughness was very strong with an R2 of 0.97. This study showed that using x-band spaceborne sensors with high spatial resolution, such as COSMO-SkyMed, are more suitable for surface roughness evaluation in flat arid environments and should be in favor with longer wavelength operating sensors such as the SIR-C. The current study presents an innovative method to evaluate Manning's hydraulic roughness coefficient (n) in arid environments using radar backscattering. The weather radar rainfall data was calibrated using rain gauges located in the watershed. The

  2. Evaluation of the COSHH Essentials model with a mixture of organic chemicals at a medium-sized paint producer.

    PubMed

    Lee, Eun Gyung; Slaven, James; Bowen, Russell B; Harper, Martin

    2011-01-01

    The Control of Substances Hazardous to Health (COSHH) Essentials model was evaluated using full-shift exposure measurements of five chemical components in a mixture [acetone, ethylbenzene, methyl ethyl ketone, toluene, and xylenes] at a medium-sized plant producing paint materials. Two tasks, batch-making and bucket-washing, were examined. Varying levels of control were already established in both tasks and the average exposures of individual chemicals were considerably lower than the regulatory and advisory 8-h standards. The average exposure fractions using the additive mixture formula were also less than unity (batch-making: 0.25, bucket-washing: 0.56) indicating the mixture of chemicals did not exceed the combined occupational exposure limit (OEL). The paper version of the COSHH Essentials model was used to calculate a predicted exposure range (PER) for each chemical according to different levels of control. The estimated PERs of the tested chemicals for both tasks did not show consistent agreement with exposure measurements when the comparison was made for each control method and this is believed to be because of the considerably different volatilities of the chemicals. Given the combination of health hazard and exposure potential components, the COSHH Essentials model recommended a control approach 'special advice' for both tasks, based on the potential reproductive hazard ascribed to toluene. This would not have been the same conclusion if some other chemical had been substituted (for example styrene, which has the same threshold limit value as toluene). Nevertheless, it was special advice, which had led to the combination of hygienic procedures in place at this plant. The probability of the combined exposure fractions exceeding unity was 0.0002 for the batch-making task indicating that the employees performing this task were most likely well protected below the OELs. Although the employees involved in the bucket-washing task had greater potential to exceed

  3. Inclusion of potential vorticity uncertainties into a hydrometeorological forecasting chain: application to a medium size basin of Mediterranean Spain

    NASA Astrophysics Data System (ADS)

    Amengual, A.; Romero, R.; Vich, M.; Alonso, S.

    2009-06-01

    The improvement of the short- and mid-range numerical runoff forecasts over the flood-prone Spanish Mediterranean area is a challenging issue. This work analyses four intense precipitation events which produced floods of different magnitude over the Llobregat river basin, a medium size catchment located in Catalonia, north-eastern Spain. One of them was a devasting flash flood - known as the "Montserrat" event - which produced 5 fatalities and material losses estimated at about 65 million euros. The characterization of the Llobregat basin's hydrological response to these floods is first assessed by using rain-gauge data and the Hydrologic Engineering Center's Hydrological Modeling System (HEC-HMS) runoff model. In second place, the non-hydrostatic fifth-generation Pennsylvania State University/NCAR mesoscale model (MM5) is nested within the ECMWF large-scale forecast fields in a set of 54 h period simulations to provide quantitative precipitation forecasts (QPFs) for each hydrometeorological episode. The hydrological model is forced with these QPFs to evaluate the reliability of the resulting discharge forecasts, while an ensemble prediction system (EPS) based on perturbed atmospheric initial and boundary conditions has been designed to test the value of a probabilistic strategy versus the previous deterministic approach. Specifically, a Potential Vorticity (PV) Inversion technique has been used to perturb the MM5 model initial and boundary states (i.e. ECMWF forecast fields). For that purpose, a PV error climatology has been previously derived in order to introduce realistic PV perturbations in the EPS. Results show the benefits of using a probabilistic approach in those cases where the deterministic QPF presents significant deficiencies over the Llobregat river basin in terms of the rainfall amounts, timing and localization. These deficiences in precipitation fields have a major impact on flood forecasts. Our ensemble strategy has been found useful to reduce the

  4. Inclusion of potential vorticity uncertainties into a hydrometeorological forecasting chain: application to a medium size basin of Mediterranean Spain

    NASA Astrophysics Data System (ADS)

    Amengual, A.; Romero, R.; Vich, M.; Alonso, S.

    2009-01-01

    The improvement of the short- and mid-range numerical runoff forecasts over the flood-prone Spanish Mediterranean area is a challenging issue. This work analyses four intense precipitation events which produced floods of different magnitude over the Llobregat river basin, a medium size catchment located in Catalonia, north-eastern Spain. One of them was a devasting flash flood - known as the "Montserrat" event - which produced 5 fatalities and material losses estimated at about 65 million euros. The characterization of the Llobregat basin's hydrological response to these floods is first assessed by using rain-gauge data and the Hydrologic Engineering Center's Hydrological Modeling System (HEC-HMS) runoff model. In second place, the non-hydrostatic fifth-generation Pennsylvania State University/NCAR mesoscale model (MM5) is nested within the ECMWF large-scale forecast fields in a set of 54 h period simulations to provide quantitative precipitation forecasts (QPFs) for each hydrometeorological episode. The hydrological model is forced with these QPFs to evaluate the reliability of the resulting discharge forecasts, while an ensemble prediction system (EPS) based on perturbed atmospheric initial and boundary conditions has been designed to test the value of a probabilistic strategy versus the previous deterministic approach. Specifically, a Potential Vorticity (PV) Inversion technique has been used to perturb the MM5 model initial and boundary states (i.e. ECMWF forecast fields). For that purpose, a PV error climatology has been previously derived in order to introduce realistic PV perturbations in the EPS. Results show the benefits of using a probabilistic approach in those cases where the deterministic QPF presents significant deficiencies over the Llobregat river basin in terms of the rainfall amounts, timing and localization. These deficiences in precipitation fields have a major impact on flood forecasts. Our ensemble strategy has been found useful to reduce the

  5. The Cooperation of Small and Middle-Sized Companies with Universities in Turkey: Acquiring Enterprising Skills Project

    ERIC Educational Resources Information Center

    Dalyan, Figen

    2004-01-01

    Higher education institutions are the places from where the societies base the information, deliver and apply it. Moreover, it is the place where the people who are required to bring innovations with required abilities, skills and attitudes are trained. Forming a network between the small and middle sized companies (SMSC) and higher education…

  6. Evaluation of the COSHH Essentials Model with a Mixture of Organic Chemicals at a Medium-Sized Paint Producer

    PubMed Central

    Lee, Eun Gyung; Slaven, James; Bowen, Russell B.; Harper, Martin

    2011-01-01

    The Control of Substances Hazardous to Health (COSHH) Essentials model was evaluated using full-shift exposure measurements of five chemical components in a mixture [acetone, ethylbenzene, methyl ethyl ketone, toluene, and xylenes] at a medium-sized plant producing paint materials. Two tasks, batch-making and bucket-washing, were examined. Varying levels of control were already established in both tasks and the average exposures of individual chemicals were considerably lower than the regulatory and advisory 8-h standards. The average exposure fractions using the additive mixture formula were also less than unity (batch-making: 0.25, bucket-washing: 0.56) indicating the mixture of chemicals did not exceed the combined occupational exposure limit (OEL). The paper version of the COSHH Essentials model was used to calculate a predicted exposure range (PER) for each chemical according to different levels of control. The estimated PERs of the tested chemicals for both tasks did not show consistent agreement with exposure measurements when the comparison was made for each control method and this is believed to be because of the considerably different volatilities of the chemicals. Given the combination of health hazard and exposure potential components, the COSHH Essentials model recommended a control approach ‘special advice’ for both tasks, based on the potential reproductive hazard ascribed to toluene. This would not have been the same conclusion if some other chemical had been substituted (for example styrene, which has the same threshold limit value as toluene). Nevertheless, it was special advice, which had led to the combination of hygienic procedures in place at this plant. The probability of the combined exposure fractions exceeding unity was 0.0002 for the batch-making task indicating that the employees performing this task were most likely well protected below the OELs. Although the employees involved in the bucket-washing task had greater potential to

  7. Evaluation of the COSHH Essentials model with a mixture of organic chemicals at a medium-sized paint producer.

    PubMed

    Lee, Eun Gyung; Slaven, James; Bowen, Russell B; Harper, Martin

    2011-01-01

    The Control of Substances Hazardous to Health (COSHH) Essentials model was evaluated using full-shift exposure measurements of five chemical components in a mixture [acetone, ethylbenzene, methyl ethyl ketone, toluene, and xylenes] at a medium-sized plant producing paint materials. Two tasks, batch-making and bucket-washing, were examined. Varying levels of control were already established in both tasks and the average exposures of individual chemicals were considerably lower than the regulatory and advisory 8-h standards. The average exposure fractions using the additive mixture formula were also less than unity (batch-making: 0.25, bucket-washing: 0.56) indicating the mixture of chemicals did not exceed the combined occupational exposure limit (OEL). The paper version of the COSHH Essentials model was used to calculate a predicted exposure range (PER) for each chemical according to different levels of control. The estimated PERs of the tested chemicals for both tasks did not show consistent agreement with exposure measurements when the comparison was made for each control method and this is believed to be because of the considerably different volatilities of the chemicals. Given the combination of health hazard and exposure potential components, the COSHH Essentials model recommended a control approach 'special advice' for both tasks, based on the potential reproductive hazard ascribed to toluene. This would not have been the same conclusion if some other chemical had been substituted (for example styrene, which has the same threshold limit value as toluene). Nevertheless, it was special advice, which had led to the combination of hygienic procedures in place at this plant. The probability of the combined exposure fractions exceeding unity was 0.0002 for the batch-making task indicating that the employees performing this task were most likely well protected below the OELs. Although the employees involved in the bucket-washing task had greater potential to exceed

  8. Competition among fcc-like, double-layered flat, tubular cage, and close-packed structural motifs for medium-sized Au n (n = 21-28) clusters.

    PubMed

    Tian, Dongxu; Zhao, Jijun

    2008-04-10

    Using density functional theory calculations, we compared four kinds of possible structural motifs of the medium-sized Aun (n = 21-28) clusters, i.e., fcc-like, double-layered flat, tubular cage, and close-packed. Our results show strong competition between those structural motifs in the medium-sized gold clusters. Aun (n = 21-23) adopt fcc-like structure owing to the high stability of tetrahedral Au20. A structural transition from fcc-like to tubular occurs at Au24, and the tubular motif continues at Au27 and Au28. Meanwhile, a double-layered flat structure was found at Au25, and a pyramid-based structure at Au26. The relationship between electronic properties and cluster geometry was also discussed.

  9. Why Do Small Enterprises Participate in a Programme for Competence Development?

    ERIC Educational Resources Information Center

    Kock, Henrik; Gill, Andreas; Ellstrom, Per Erik

    2008-01-01

    Purpose: The purpose of this paper is to increase our understanding of why firms, specifically small to medium-sized enterprises (SMEs), participate in a programme for competence development and why firms use different strategies for competence development. Design/methodology/approach: A study of 17 SMEs that all received support from the European…

  10. Factors Affecting the Provision of Entry-Level Training by Enterprises. Australian Apprenticeships.

    ERIC Educational Resources Information Center

    Ball, K.; Freeland, B.

    A study examined key determinants of apprentice and trainee employment in small and medium-sized enterprises that play an increasing role in providing employment-based training in Australia. It used unit record data from four waves of the Australian Bureau of Statistics business growth and performance surveys 1994-95 to 1997-98, which sent…

  11. Moebius Strip Enterprises and Expertise in the Creative Industries: New Challenges for Lifelong Learning?

    ERIC Educational Resources Information Center

    Guile, David

    2007-01-01

    The paper argues that the emergence of a new mode of production--co-configuration is generating new modes of expertise that EU policies for lifelong learning (LLL) are not designed to support professionals to develop. It maintains that this change can be seen most clearly when we analyse Small and Medium Size (SMEs) enterprises in the creative…

  12. Medium- to long-term results of a randomized controlled trial to assess the efficacy of arthoscopic-subacromial decompression versus mini-open repair for the treatment of medium-sized rotator cuff tears

    PubMed Central

    Birch, Ann; Temperley, David; Odak, Saurabh; Walton, Michael J; Haines, John F; Trail, Ian

    2015-01-01

    Background We report on the medium- to long-term results of a randomized controlled trial (RCT) aiming to determine whether rotator cuff repair confers any advantage over arthroscopic sub-acromial decompression (ASAD) alone in the management of medium-sized rotator cuff tears. Methods Ethical approval was sought to follow-up patients previously enrolled in a completed and previously published RCT comparing the outcome of ASAD with mini-open cuff repair for the treatment of rotator cuff tear. Forty-two patients were enrolled in the original study, with a mean of 64 years (range 54 years to 77 years). Results Fifteen of the original 17 patients randomized to ASAD alone and 18 of the original 25 patients randomized to cuff repair were available for follow-up. Each patient underwent American Shoulder and Elbow Surgeons (ASES), Disabilities of the Arm, Shoulder and Hand (DASH) and Constant scoring, and clinical and ultrasound examination. Mean duration of follow-up was 7 years (range 5 years to 11 years). There was no statistically significant difference in terms of ASES, DASH and Constant scores at follow-up between the two groups. Some 33% of patients in the cuff-repair group had a proven re-rupture on ultrasound. This patient subgroup had significantly worse Constant scores compared to patients where the repair remained intact. None of the patients from either group developed cuff-tear arthropathy requiring arthroplasty surgery. Conclusions In this medium- to longer-term study, there is no demonstrable significant benefit of cuff repair over decompression alone for the treatment of medium-sized rotator cuff tears, in terms of ASES, DASH and Constant scores for pain, function and strength modules. The presence of cuff tear does not necessitate surgical repair. This conclusion should drive surgical strategies and shared decision-making between patients and surgeons. PMID:27583006

  13. Quantitative Characterization of the Growth of Deinococcus geothermalis DSM-11302: Effect of Inoculum Size, Growth Medium and Culture Conditions

    PubMed Central

    Bornot, Julie; Molina-Jouve, Carole; Uribelarrea, Jean-Louis; Gorret, Nathalie

    2015-01-01

    Due to their remarkable resistance to extreme conditions, Deinococcaceae strains are of great interest to biotechnological prospects. However, the physiology of the extremophile strain Deinococcus geothermalis has scarcely been studied and is not well understood. The physiological behaviour was then studied in well-controlled conditions in flask and bioreactor cultures. The growth of D. geothermalis type strains was compared. Among the strains tested, the strain from the German Collection of Microorganisms (Deutsche Sammlung von Mikroorganismen DSM) DSM-11302 was found to give the highest biomass concentration and growth rate: in a complex medium with glucose, the growth rate reached 0.75 h−1 at 45 °C. Yeast extract concentration in the medium had significant constitutive and catalytic effects. Furthermore, the results showed that the physiological descriptors were not affected by the inoculum preparation steps. A batch culture of D. geothermalis DSM-11302 on defined medium was carried out: cells grew exponentially with a maximal growth rate of 0.28 h−1 and D. geothermalis DSM-11302 biomass reached 1.4 g·L−1 in 20 h. Then, 1.4 gDryCellWeight of biomass (X) was obtained from 5.6 g glucose (Glc) consumed as carbon source, corresponding to a yield of 0.3 CmolX·CmolGlc−1; cell specific oxygen uptake and carbon dioxide production rates reached 216 and 226 mmol.CmolX−1·h−1, respectively, and the respiratory quotient (QR) value varied from 1.1 to 1.7. This is the first time that kinetic parameters and yields are reported for D. geothermalis DSM-11302 grown on a mineral medium in well-controlled batch culture.

  14. Integrated hydrological modelling of small- and medium-sized water storages with application to the upper Fengman Reservoir Basin of China

    NASA Astrophysics Data System (ADS)

    Zhang, C.; Peng, Y.; Chu, J.; Shoemaker, C. A.

    2012-03-01

    Hydrological simulation in regions with a large number of water storages is difficult due to the inaccurate water storage data, including both topologic parameters and operational rules. To address this issue, this paper presents an improved version of SWAT2005 (Soil and Water Assessment Tool, version 2005) using the satellite-based dataset Landsat, an empirical storage classification method, and some empirical relationships to estimate water storage and release from the various levels of flow regulation facilities. The improved SWAT2005 is characterised by three features: (1) a realistic representation of the relationships between the water surface area and volume of each type of water storage, ranging from small-sized ponds for water flow regulation to large-sized and medium-sized reservoirs for water supply and hydropower generation; (2) water balance and transport through a network combining both sequential and parallel streams and storage links; and (3) calibrations for the physical parameters and the human interference parameters. Both the original and improved SWAT2005 are applied to the upper Fengman Reservoir Basin, and the results of these applications are compared. The improved SWAT2005 accurately models small- and medium-sized storages, indicating a significantly improved performance from that of the original model in reproducing streamflows.

  15. A First Look at Modern Enterprise Traffic

    SciTech Connect

    Pang, Ruoming; Mark Allman, Mark; Bennett, Mike; Lee, Jason; Paxson, Vern; Tierney, Brian

    2005-06-01

    While wide-area Internet traffic has been heavily studied for many years, the characteristics of traffic inside Internet enterprises remain almost wholly unexplored. Nearly all of the studies of enterprise traffic available in the literature are well over a decade old and focus on individual LANs rather than whole sites. In this paper we present a broad overview of internal enterprise traffic recorded at a medium-sized site. The packet traces span more than 100 hours, over which activity from a total of several thousand internal hosts appears. This wealth of data--which we are publicly releasing in anonymized form--spans a wide range of dimensions. While we cannot form general conclusions using data from a single site, and clearly this sort of data merits additional in-depth study in a number of ways, in this work we endeavor to characterize a number of the most salient aspects of the traffic. Our goal is to provide a first sense of ways in which modern enterprise traffic is similar to wide-area Internet traffic, and ways in which it is quite different.

  16. Considerable Variation of Antibacterial Activity of Cu Nanoparticles Suspensions Depending on the Storage Time, Dispersive Medium, and Particle Sizes.

    PubMed

    Zakharova, Olga V; Godymchuk, Anna Yu; Gusev, Alexander A; Gulchenko, Svyatoslav I; Vasyukova, Inna A; Kuznetsov, Denis V

    2015-01-01

    Suspensions of Cu nanoparticles are promising for creating the new class of alternative antimicrobial products. In this study we examined copper nanoparticles of various sizes obtained by the method of wire electric explosion: nanopowder average size 50 nm (Cu 50) and 100 nm (Cu 100). The paper presents the complex study of the influence of physicochemical properties such as particle size and concentration of the freshly prepared and 24-hour suspensions of Cu nanoparticles in distilled water and physiological solution upon their toxicity to bacteria E. coli M-17. Ionic solution of Cu(2+) and sodium dichloroisocyanurate was used for comparison study. It has been shown that decrease in the nanoparticle size leads to changes in the correlation between toxicity and concentration as toxicity peaks are observed at low concentrations (0.0001⋯0.01 mg/L). It has been observed that antibacterial properties of Cu 50 nanoparticle suspensions are ceased after 24-hour storage, while for Cu 100 suspensions no correlation between antibacterial properties and storage time has been noted. Cu 100 nanoparticle suspensions at 10 mg/L concentration display higher toxicity at substituting physiological solution for water than Cu 50 suspensions. Dependence of the toxicity on the mean particle aggregates size in suspension was not revealed. PMID:26339611

  17. Considerable Variation of Antibacterial Activity of Cu Nanoparticles Suspensions Depending on the Storage Time, Dispersive Medium, and Particle Sizes

    PubMed Central

    Zakharova, Olga V.; Godymchuk, Anna Yu.; Gusev, Alexander A.; Gulchenko, Svyatoslav I.; Vasyukova, Inna A.; Kuznetsov, Denis V.

    2015-01-01

    Suspensions of Cu nanoparticles are promising for creating the new class of alternative antimicrobial products. In this study we examined copper nanoparticles of various sizes obtained by the method of wire electric explosion: nanopowder average size 50 nm (Cu 50) and 100 nm (Cu 100). The paper presents the complex study of the influence of physicochemical properties such as particle size and concentration of the freshly prepared and 24-hour suspensions of Cu nanoparticles in distilled water and physiological solution upon their toxicity to bacteria E. coli M-17. Ionic solution of Cu2+ and sodium dichloroisocyanurate was used for comparison study. It has been shown that decrease in the nanoparticle size leads to changes in the correlation between toxicity and concentration as toxicity peaks are observed at low concentrations (0.0001⋯0.01 mg/L). It has been observed that antibacterial properties of Cu 50 nanoparticle suspensions are ceased after 24-hour storage, while for Cu 100 suspensions no correlation between antibacterial properties and storage time has been noted. Cu 100 nanoparticle suspensions at 10 mg/L concentration display higher toxicity at substituting physiological solution for water than Cu 50 suspensions. Dependence of the toxicity on the mean particle aggregates size in suspension was not revealed. PMID:26339611

  18. Considerable Variation of Antibacterial Activity of Cu Nanoparticles Suspensions Depending on the Storage Time, Dispersive Medium, and Particle Sizes.

    PubMed

    Zakharova, Olga V; Godymchuk, Anna Yu; Gusev, Alexander A; Gulchenko, Svyatoslav I; Vasyukova, Inna A; Kuznetsov, Denis V

    2015-01-01

    Suspensions of Cu nanoparticles are promising for creating the new class of alternative antimicrobial products. In this study we examined copper nanoparticles of various sizes obtained by the method of wire electric explosion: nanopowder average size 50 nm (Cu 50) and 100 nm (Cu 100). The paper presents the complex study of the influence of physicochemical properties such as particle size and concentration of the freshly prepared and 24-hour suspensions of Cu nanoparticles in distilled water and physiological solution upon their toxicity to bacteria E. coli M-17. Ionic solution of Cu(2+) and sodium dichloroisocyanurate was used for comparison study. It has been shown that decrease in the nanoparticle size leads to changes in the correlation between toxicity and concentration as toxicity peaks are observed at low concentrations (0.0001⋯0.01 mg/L). It has been observed that antibacterial properties of Cu 50 nanoparticle suspensions are ceased after 24-hour storage, while for Cu 100 suspensions no correlation between antibacterial properties and storage time has been noted. Cu 100 nanoparticle suspensions at 10 mg/L concentration display higher toxicity at substituting physiological solution for water than Cu 50 suspensions. Dependence of the toxicity on the mean particle aggregates size in suspension was not revealed.

  19. Competition between supercluster and stuffed cage structures in medium-sized Gen (n=30-39) clusters

    NASA Astrophysics Data System (ADS)

    Wang, Lu; Zhao, Jijun

    2008-01-01

    We have performed an unbiased global search for the geometries of low-lying Gen clusters in the size range of 30⩽n⩽39 using genetic algorithm incorporated with a tight-binding model. Density functional theory calculations were carried out to further optimize the isomer structures. Gen (n=30-39) clusters prefer the motif of supercluster structures stacked by several stable subunits such as Ge10 and Ge6, connecting via a few bridging atoms. Size-dependent cluster properties such as binding energy, HOMO-LUMO gaps, and ionization potentials were discussed and compared with experiments.

  20. Structural evolution and electronic properties of medium-sized gallium clusters from ab initio genetic algorithm search.

    PubMed

    Sai, Linwei; Zhao, Jijun; Huang, Xiaoming; Wang, Jun

    2012-01-01

    Using genetic algorithm incorporated with density functional theory, we have explored the size evolution of structural and electronic properties of neutral gallium clusters of 20-40 atoms in terms of their ground state structures, binding energies, second differences of energy, HOMO-LUMO gaps, distributions of bond length and bond angle, and electron density of states. In the size range studied, the Ga(n) clusters exhibit several growth patterns, and the core-shell structures become dominant from Ga31. With high point group symmetries, Ga23 and Ga36 show particularly high stability and Ga36 owns a large HOMO-LUMO gap. The atomic structures and electronic states of Ga(n) clusters significantly differ from the a solid but resemble beta solid and liquid to certain extent.

  1. Gender differences in body size dissatisfaction among individuals with low, medium, or high levels of body focus.

    PubMed

    Lokken, Kristine; Ferraro, F Richard; Kirchner, Tara; Bowling, Margo

    2003-07-01

    The authors designed the present study to test whether women reported higher levels of body dissatisfaction than did men even when the 2 genders were matched on a measure of degree of body focus. Sixty undergraduates (30 men, 30 women) were screened on attention-to-body-shape scores and divided into high, medium, and low body-shape-focus groups. The participants also completed questionnaires that provided information on age, education, vocabulary ability, levels of depression, and body-image assessment. The groups did not differ (ps > .05) on age, education, vocabulary ability, or levels of depression. However, women in all 3 body-shape-focus categories indicated a larger discrepancy between their real vs. ideal body images (p < .01) than did the men. In the high-body-focus group, there was an 11:1ratio between women's and men's reported real-ideal body-shape discrepancies. Women showed greater body dissatisfaction than did men, even when the genders were matched on a measure of body focus.

  2. Submicron-sized boron carbide particles encapsulated in turbostratic graphite prepared by laser fragmentation in liquid medium.

    PubMed

    Ishikawa, Yoshie; Sasaki, Takeshi; Koshizaki, Naoto

    2010-08-01

    Submicron-sized B4C spherical particles were obtained by laser fragmentation of large B4C particles dispersed in ethyl acetate. The irradiated surface of large B4C raw particles was heated and melted by laser energy absorption. B4C droplets were then cooled down, and finally B4C spherical particles were obtained. Moreover, each B4C particle obtained was encapsulated in a graphitic layer that is useful for medical functionalization of particles. Thus, obtained B4C particles encapsulated in graphitic layer may have potential uses in boron neutron capture therapy.

  3. Constraining the size of the Comptonizing medium by modelling the energy-dependent time lags of kHz QPOs of neutron star system

    NASA Astrophysics Data System (ADS)

    Kumar, Nagendra; Misra, Ranjeev

    2016-09-01

    We study the dependence of the estimated size and geometry of the medium on the time-averaged spectral model assumed and on the frequency of the kHz quasi-periodic oscillation (QPO) in the framework of a thermal Comptonization model. We use the high-quality time lag and rms obtained during 1996 March 3 observation of 4U 1608-52 by RXTE as well as other observations of the source at different QPO frequencies where a single time lag between two broad energy bands has been reported. We compare the results obtained when assuming that the time-averaged spectra are represented by the spectrally degenerate `hot (kTb ≥ 1 keV)' and `cold (kTb ≤ 0.5 keV)' seed spectral models where Tb is seed source temperature. We find that for the `hot-seed' model the medium size is in the range of 0.3-2.0 km and the size decreases with increasing QPO frequency. On the other hand, for the `cold-seed' model, the range for the sizes is much larger 0.5-20 km and hence perhaps show no variation with QPO frequency. Our results emphasize the need for broad-band spectral information combined with high-frequency timing to lift this degeneracy. We further compare the rms as a function of energy for the upper kHz QPO, and indeed we find that the driver for this QPO should be temperature variations of the corona identical to the lower kHz QPO. However, the time lag reported for the upper kHz QPO is hard, which if confirmed would challenge the simple Comptonization model presented here.

  4. Particle size distribution of nicotine in mainstream smoke from 2R4F, Marlboro Medium, and Quest1 cigarettes under different puffing regimens.

    PubMed

    Gowadia, Neha; Oldham, Michael J; Dunn-Rankin, Derek

    2009-04-01

    Nicotine's dose and rate of delivery to the brain play an important role in its addiction and cardiovascular effects. Nicotine is mainly present in the particulate phase of cigarette smoke, and since particle size distribution controls the deposition behavior of particles in the respiratory tract, changes in the particle size distribution can produce variations in its regional and total dose to the lung. These variations can change its absorption rate and delivery to the brain. The particle size distribution of mainstream smoke (MS) varies with changes in puffing regimen and cigarette design and composition. This study examined nicotine in different particle size fractions of MS generated from 2R4F, Marlboro Medium, and Quest1 cigarettes using 3 puffing regimens: (1) FTC-like puff, 35 ml over 2 s; (2) short puff, 50 ml over 2 s; and (3) long puff, 100 ml over 10 s. MS was generated in a chamber at 37 degrees C and >95% relative humidity (RH), and size-segregated particles were collected using RJR cascade impactors. Particle size distribution was determined by spectrophotometry. Nicotine was analyzed using gas chromatography and mass spectrometry. Results showed that nicotine speciates in larger particles (1.1-1.9 microm diameter) under the long puffing regimen and in smaller particles (0.4-1.1 microm diameter) under the short puffing regimen, while mass median aerodynamic diameter of mainstream smoke particles was found to be approximately constant (0.9-1.0 microm) for the three puffing regimens. Overall, changes in puffing regimen have a significant effect on particle size distribution of nicotine and its deposited dose. PMID:19496699

  5. Study of the Surface Heterogeneity of icy dwarf?planets and other medium size Kuiper Belt objects

    NASA Astrophysics Data System (ADS)

    Pinilla-Alonso, Noemi; Emery, Josh P.

    2015-10-01

    We propose a comprehensive analysis of the surface heterogeneity of a selected sample of dwarf-planets and candidates to be considered as dwarf-planets. The sample has been carefully selected to reach the scientific goals with a relative low cost in observing time. The research proposed here will be based on the analysis of the light-curve of these objects obtained using IRAC/Spitzer photometry. KBOs likely retain some of the most primitive material in the Solar System. Models of the retention of volatiles by small-bodies in the Solar System show that dwarf-planets can retain most of the original inventory of volatiles. A good example is Pluto. The surface of this body is formed by patches of CH4, N2 and CO and exhibits a large degree of surface heterogeneity. Our preliminary results of the IRAC/Spitzer light curves of Pluto, obtained by this group in 2004 and 2014, show the potential of these data to map the surface distribution of the different species of ices on the surface of KBOs. For this project we have selected six objects (out of a list of 15) that are ideal for this study using Spitzer photometry. Our sample covers two classes of bodies: Eris, Makemake and Haumea, all large enough to retain volatiles and so how signs of sublimation and condensation cycles on their surfaces; and Quaoar, Varuna and Ixion (D<1000 km) that may not have retained volatiles. If signs of heterogeneity are detected on IRAC data from these medium bodies (as suggested by previous studies) this could be due to a combination of collisions and irradiation. By addressing the compositional heterogeneity of this sample of KBOs the proposed work will address gaps in the scientific knowledge of the chemical and dynamical history of the outer Solar System as well as other planetary systems.}

  6. Mental health, suicidal ideation, and related factors among workers from medium-sized business establishments in northern Japan: comparative study of sex differences.

    PubMed

    Takusari, Eri; Suzuki, Mitsuru; Nakamura, Hikaru; Otsuka, Kotaro

    2011-01-01

    A questionnaire survey was conducted among 3,233 workers (2,442 males and 791 females) from 17 medium-sized business establishments in northern Japan with respect to GHQ-12 score, suicidal ideation, sociodemographic characteristics, work-associated factors, and attitude toward mental health resources. Sex differences were assessed for each questionnaire item, and logistic regression analyses were performed separately for males and females. Significant correlations between common mental disorder (CMD: GHQ-12 score≥3) and the following factors were found for both sexes: short sleep, irregular working schedule, working in specific businesses, and attitude toward mental health resources. Associations between CMD and excess workload were significant only in male workers. While correlations between suicidal ideation and demand for mental health resources were observed in both sexes, significant correlations were observed between suicidal ideation and use of mental health resources for female workers alone. These results suggest that screening of a high-risk population and provision of mental health resources contribute to suicide prevention as a part of mental health promotion measures in medium-sized business establishments. They also suggest the need for identification of business/job type-specific stressors while considering sex differences in lifestyle factors, working environment, and help-seeking behavior. PMID:21697623

  7. Post-operative complications associated with the Arthrex Canine Cranial Cruciate Ligament Repair Anchor System in small- to medium-sized dogs: A retrospective analysis (2009-2012).

    PubMed

    Rappa, Nick S; Radasch, Robert M

    2016-08-01

    This study classified and determined the post-operative complication rate associated with stabilization of cranial (CCL) ligament deficient stifles in small- to medium-sized dogs with the Arthrex Canine Cranial Cruciate Ligament Repair Anchor System (CCLRAS). Eighty-five medical records from 2009 to 2012 from 1 institution were evaluated. Complications were classified according to previously proposed definitions for orthopedic studies in veterinary medicine. Fifty-two owners were contacted by telephone at least 6 months after surgery and given a questionnaire to classify complications related to the implant. A visual analog scale was used to assess functionality and degree of pain. The overall complication rate was 30.3% with an inflammation-infection rate of 5.4% and a documented infection rate requiring implant removal of 1.8%. Owners reported full or acceptable function in 96% of cases with an average functional score of 86.5. Stabilization of CCL-deficient stifles in small- to medium-sized dogs with the Arthrex Canine CCLRAS is reliable with acceptable complication rates.

  8. Using MUSIC and CC(CO)NH for backbone assignment of two medium-sized proteins not fully accessible to standard 3D NMR.

    PubMed

    Brenner, Annette K; Frøystein, Nils Åge

    2014-01-01

    The backbone assignment of medium-sized proteins is rarely as straightforward as that of small proteins, and thus often requires creative solutions. Here, we describe the application of a combination of standard 3D heteronuclear methods with CC(CO)NH and a variety of MUltiplicity Selective In-phase Coherence transfer (MUSIC) experiments. Both CC(CO)NH and MUSIC are, in theory, very powerful methods for the backbone assignment of proteins. Due to low sensitivity, their use has usually been linked to small proteins only. However, we found that combining CC(CO)NH and MUSIC experiments simplified the assignment of two challenging medium-sized proteins of 13 and 19.5 kDa, respectively. These methods are to some extent complementary to each other: CC(CO)NH acquired with a long isotropic mixing time can identify amino acids with large aliphatic side chains. Whereas the most sensitive MUSIC experiments identify amino acid types that cannot be detected by CC(CO)NH, comprising the residues with acid and amide groups, and aromatic rings in their side chains. Together these methods provide a means of identifying the majority of peaks in the 2D 15N HSQC spectrum which simplifies the backbone assignment work even for proteins, e.g., small kinases, whose standard spectra resulted in little spectral resolution and low signal intensities.

  9. A signet-ring cell melanoma arising from a medium-sized congenital melanocytic nevus in an adult: A case report and literature review.

    PubMed

    Tajima, Shogo; Koda, Kenji

    2015-07-01

    Patients with congenital nevus, especially giant congenital melanocytic nevus (CMN) measuring >20 cm, are known to be at elevated risk of developing melanomas, especially during the first and second decades of life. Melanomas rarely develop in patients with small and medium-sized CMNs, but if they do, they occur during the fourth and fifth decades of life. We present a case of a rapidly enlarging signet-ring cell melanoma (over 3 months) that arose from a medium-sized CMN in a 57-year-old Japanese man. Only 11 other cases of signet-ring cell melanomas at the primary site have been reported. On the basis of morphology alone, it is difficult to diagnose a nodule appearing in a CMN as a signet-ring cell melanoma, because even a benign melanocytic nevus can appear as signet-ring cell morphology. Moreover, a rapidly growing proliferative nodule (PN) more often develops in a CMN than melanoma; PNs may at times exhibit enough atypia to be comparable to melanomas. In our case, loss of p16 expression in the melanoma distinguished it from the nevus cells and was helpful in making the correct diagnosis. Clinical information, such as the patient's age, was also useful in establishing the diagnosis.

  10. Evaluation of Volatile Organic Compounds and Carbonyl Compounds Present in the Cabins of Newly Produced, Medium- and Large-Size Coaches in China

    PubMed Central

    Lu, Yan-Yang; Lin, Yi; Zhang, Han; Ding, Dongxiao; Sun, Xia; Huang, Qiansheng; Lin, Lifeng; Chen, Ya-Jie; Chi, Yu-Lang; Dong, Sijun

    2016-01-01

    An air-conditioned coach is an important form of transportation in modern motorized society; as a result, there is an increasing concern of in-vehicle air pollution. In this study, we aimed to identify and quantify the levels of volatile organic compounds (VOCs) and carbonyl compounds (CCs) in air samples collected from the cabins of newly produced, medium- and large-size coaches. Among the identified VOCs and CCs, toluene, ethylbenzene, xylene, formaldehyde, acetaldehyde, acrolein/acetone, and isovaleraldehyde were relatively abundant in the cabins. Time was found to affect the emissions of the contaminants in the coaches. Except for benzaldehyde, valeraldehyde and benzene, the highest in-vehicle concentrations of VOCs and CCs were observed on the 15th day after coming off the assembly line, and the concentrations exhibited an approximately inverted U-shaped pattern as a function of time. Interestingly, this study also showed that the interior temperature of the coaches significantly affected the VOCs emissions from the interior materials, whereas the levels of CCs were mainly influenced by the relative humidity within the coaches. In China, guidelines and regulations for the in-vehicle air quality assessment of the coaches have not yet been issued. The results of this study provide further understanding of the in-vehicle air quality of air-conditioned coaches and can be used in the development of both specific and general rules regarding medium- and large-size coaches. PMID:27314375

  11. Evaluation of Volatile Organic Compounds and Carbonyl Compounds Present in the Cabins of Newly Produced, Medium- and Large-Size Coaches in China.

    PubMed

    Lu, Yan-Yang; Lin, Yi; Zhang, Han; Ding, Dongxiao; Sun, Xia; Huang, Qiansheng; Lin, Lifeng; Chen, Ya-Jie; Chi, Yu-Lang; Dong, Sijun

    2016-01-01

    An air-conditioned coach is an important form of transportation in modern motorized society; as a result, there is an increasing concern of in-vehicle air pollution. In this study, we aimed to identify and quantify the levels of volatile organic compounds (VOCs) and carbonyl compounds (CCs) in air samples collected from the cabins of newly produced, medium- and large-size coaches. Among the identified VOCs and CCs, toluene, ethylbenzene, xylene, formaldehyde, acetaldehyde, acrolein/acetone, and isovaleraldehyde were relatively abundant in the cabins. Time was found to affect the emissions of the contaminants in the coaches. Except for benzaldehyde, valeraldehyde and benzene, the highest in-vehicle concentrations of VOCs and CCs were observed on the 15th day after coming off the assembly line, and the concentrations exhibited an approximately inverted U-shaped pattern as a function of time. Interestingly, this study also showed that the interior temperature of the coaches significantly affected the VOCs emissions from the interior materials, whereas the levels of CCs were mainly influenced by the relative humidity within the coaches. In China, guidelines and regulations for the in-vehicle air quality assessment of the coaches have not yet been issued. The results of this study provide further understanding of the in-vehicle air quality of air-conditioned coaches and can be used in the development of both specific and general rules regarding medium- and large-size coaches. PMID:27314375

  12. Evaluation of Volatile Organic Compounds and Carbonyl Compounds Present in the Cabins of Newly Produced, Medium- and Large-Size Coaches in China.

    PubMed

    Lu, Yan-Yang; Lin, Yi; Zhang, Han; Ding, Dongxiao; Sun, Xia; Huang, Qiansheng; Lin, Lifeng; Chen, Ya-Jie; Chi, Yu-Lang; Dong, Sijun

    2016-06-15

    An air-conditioned coach is an important form of transportation in modern motorized society; as a result, there is an increasing concern of in-vehicle air pollution. In this study, we aimed to identify and quantify the levels of volatile organic compounds (VOCs) and carbonyl compounds (CCs) in air samples collected from the cabins of newly produced, medium- and large-size coaches. Among the identified VOCs and CCs, toluene, ethylbenzene, xylene, formaldehyde, acetaldehyde, acrolein/acetone, and isovaleraldehyde were relatively abundant in the cabins. Time was found to affect the emissions of the contaminants in the coaches. Except for benzaldehyde, valeraldehyde and benzene, the highest in-vehicle concentrations of VOCs and CCs were observed on the 15th day after coming off the assembly line, and the concentrations exhibited an approximately inverted U-shaped pattern as a function of time. Interestingly, this study also showed that the interior temperature of the coaches significantly affected the VOCs emissions from the interior materials, whereas the levels of CCs were mainly influenced by the relative humidity within the coaches. In China, guidelines and regulations for the in-vehicle air quality assessment of the coaches have not yet been issued. The results of this study provide further understanding of the in-vehicle air quality of air-conditioned coaches and can be used in the development of both specific and general rules regarding medium- and large-size coaches.

  13. Influence of store dimensions and auxiliary volume configuration on the performance of medium-sized solar combisystems

    SciTech Connect

    Lundh, Magdalena; Zass, Katrin; Wilhelms, Claudius; Vajen, Klaus; Jordan, Ulrike

    2010-07-15

    To increase the fractional energy savings achieved with solar thermal combisystems the store volume may be increased. Installation of large stores in single-family houses is, however, often limited by space constraints. In this article the influence of the store dimensions, as well as internal and external auxiliary volume configurations, are investigated for large solar water stores by annual dynamic TRNSYS simulations. The results show that store sizes up to 4 m{sup 3} may be used in solar heating systems with 30 m{sup 2} collector area. It is further shown that well-insulated stores are rather insensitive to the geometry. Stores deviating from the conventional dimensions still yield high fractional energy savings. Furthermore, the simulations show that the performance of an internal auxiliary volume configuration in most cases exceeds that of a solution with an external auxiliary unit. The practical limitations of very thin auxiliary volumes must, however, be further investigated. (author)

  14. Search for global-minimum geometries of medium-sized germanium clusters. II. Motif-based low-lying clusters Ge21-Ge29

    NASA Astrophysics Data System (ADS)

    Yoo, S.; Zeng, X. C.

    2006-05-01

    We performed a constrained search for the geometries of low-lying neutral germanium clusters GeN in the size range of 21⩽N⩽29. The basin-hopping global optimization method is employed for the search. The potential-energy surface is computed based on the plane-wave pseudopotential density functional theory. A new series of low-lying clusters is found on the basis of several generic structural motifs identified previously for silicon clusters [S. Yoo and X. C. Zeng, J. Chem. Phys. 124, 054304 (2006)] as well as for smaller-sized germanium clusters [S. Bulusu et al., J. Chem. Phys. 122, 164305 (2005)]. Among the generic motifs examined, we found that two motifs stand out in producing most low-lying clusters, namely, the six/nine motif, a puckered-hexagonal-ring Ge6 unit attached to a tricapped trigonal prism Ge9, and the six/ten motif, a puckered-hexagonal-ring Ge6 unit attached to a bicapped antiprism Ge10. The low-lying clusters obtained are all prolate in shape and their energies are appreciably lower than the near-spherical low-energy clusters. This result is consistent with the ion-mobility measurement in that medium-sized germanium clusters detected are all prolate in shape until the size N ˜65.

  15. 78 FR 9938 - U.S.-Korea Free Trade Agreement: Effects on U.S. Small and Medium-Sized Enterprises; Institution...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-12

    ... (SMEs) since entry into force of the agreement on March 15, 2012. The Commission, to the extent..., and export strategy of U.S. SMEs, as identified by those SMEs, and describing how U.S. SMEs have benefited from specific provisions of the agreement, as well as challenges that U.S. SMEs may have faced...

  16. Decision Making Regarding Access to Training and Development in Medium-Sized Enterprises: An Exploratory Study Using the Critical Incident Technique

    ERIC Educational Resources Information Center

    Coetzer, Alan; Redmond, Janice; Sharafizad, Jalleh

    2012-01-01

    Purpose: The purpose of this paper is to develop an understanding of factors that impinge on managerial decision-making processes regarding employee access to structured training and development (T&D) opportunities that are at least partially funded by the firm. Design/methodology/approach: Semi-structured interviews incorporating the Critical…

  17. 78 FR 45969 - Trade Barriers That U.S. Small and Medium-Sized Enterprises Perceive as Affecting Exports to the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-30

    ... ``barrier,'' any relevant literature, and information gathered from SMEs and others. As requested by the...-related barriers; and (4) will include suggestions gathered from SMEs or the relevant literature...

  18. 78 FR 66950 - Trade Barriers That U.S. Small and Medium-Sized Enterprises Perceive as Affecting Exports to the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-07

    ... on October 8, 2013 was published in the Federal Register of July 30, 2013 (78 FR 45969); the notice... Appear, Pre- and Post-Hearing Briefs, All Other Written Submissions, and for Transmittal of Final Report... and change in dates for filing requests to appear, pre- and post-hearing briefs, all other...

  19. 78 FR 51746 - Trade Barriers That U.S. Small and Medium-sized Enterprises Perceive as Affecting Exports to the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-21

    ..., CA. SUMMARY: The Commission has scheduled an additional public hearing in Inv. No. 332-541, Trade..., to be held beginning at 9:30 a.m., September 26, 2013, at the NASA Ames Research Center at Moffett Field, CA. This hearing is in addition to a previously announced public hearing in this investigation...

  20. Reconstructing eruptive source parameters from tephra deposit: a numerical study of medium-sized explosive eruptions at Etna volcano

    NASA Astrophysics Data System (ADS)

    Spanu, Antonio; Michieli Vitturi, Mattia de'; Barsotti, Sara

    2016-09-01

    Since the 1970s, multiple reconstruction techniques have been proposed and are currently used, to extrapolate and quantify eruptive parameters from sampled tephra fall deposit datasets. Atmospheric transport and deposition processes strongly control the spatial distribution of tephra deposit; therefore, a large uncertainty affects mass derived estimations especially for fall layer that are not well exposed. This paper has two main aims: the first is to analyse the sensitivity to the deposit sampling strategy of reconstruction techniques. The second is to assess whether there are differences between the modelled values for emitted mass and grainsize, versus values estimated from the deposits. We find significant differences and propose a new correction strategy. A numerical approach is demonstrated by simulating with a dispersal code a mild explosive event occurring at Mt. Etna on 24 November 2006. Eruptive parameters are reconstructed by an inversion information collected after the eruption. A full synthetic deposit is created by integrating the deposited mass computed by the model over the computational domain (i.e., an area of 7.5 × 104 km 2). A statistical analysis based on 2000 sampling tests of 50 sampling points shows a large variability, up to 50 % for all the reconstruction techniques. Moreover, for some test examples Power Law errors are larger than estimated uncertainty. A similar analysis, on simulated grain-size classes, shows how spatial sampling limitations strongly reduce the utility of available information on the total grain size distribution. For example, information on particles coarser than ϕ(-4) is completely lost when sampling at 1.5 km from the vent for all columns with heights less than 2000 m above the vent. To correct for this effect an optimal sampling strategy and a new reconstruction method are presented. A sensitivity study shows that our method can be extended to a wide range of eruptive scenarios including those in which

  1. Equilibrium and dynamical properties of polymer chains in random medium filled with randomly distributed nano-sized fillers.

    PubMed

    Li, Chao-Yang; Luo, Meng-Bo; Huang, Jian-Hua; Li, Hong

    2015-12-21

    The effect of randomly distributed nano-sized fillers on the equilibrium and dynamical properties of linear polymers is studied by using off-lattice Monte Carlo simulation. Lennard-Jones interactions between polymers and fillers are considered. Results show that the statistical dimensions and dynamical diffusion of polymer are dependent on the polymer-filler interaction strength εpf. The mean square radius of gyration 〈RG(2)〉 shows a minimum at a critical polymer-filler interaction εpf*. The value of εpf* decreases with the increase in the polymer length or the concentration of fillers. The exponent ν in 〈RG(2)〉 ∼ N(2ν) is a typical value of self-avoiding walking chain at small εpf but it increases sharply to a bigger value at εpf > εpf*. The mean square displacement decreases with the increase in εpf. Moreover, the normal diffusion of the polymer at weak interactions changes to subnormal diffusion at moderate and strong attractions. We find that polymers diffuse in dilute filler regions at weak attraction and diffuse in dense filler regions at strong attraction. PMID:26568204

  2. Characterization of the origin of fine particulate matter in a medium size urban area in the Mediterranean

    NASA Astrophysics Data System (ADS)

    Pikridas, Michael; Tasoglou, Antonios; Florou, Kalliopi; Pandis, Spyros N.

    2013-12-01

    A multi-stage methodology for investigating particulate pollution is developed and implemented for the case study area of Patras, Greece. Initially a low cost particulate matter mass monitor was used to assess aerosol mass concentrations indicating that the city, despite its small size (population around 200,000) and lack of heavy industry, violates both the daily and annual European Union PM standards. Increased PM10 concentrations were observed during the winter but local vehicular traffic was estimated to account for only 12 ± 4% of the PM10 concentration on an annual basis. In the second stage, PM2.5 chemical composition was measured at the urban center and biomass burning was identified as a major PM source during the colder months. In the third stage, PM2.5 concentration and chemical composition was also followed at a mostly upwind rural site around 40 km from the city. The transported pollution was found to account for 50% of the PM2.5 during winter and for more than 70% during the rest of the year. Almost all of the sulfates and 40-90%, depending on the season, of the organic aerosol are transported to the city from other areas. In the last stage, an intensive campaign took place during winter in order to quantify PM sources during the most polluted period. Nighttime sharp increases of the aerosol levels were observed with organic aerosol levels exceeding 80 μg m-3. Local biomass combustion and fossil fuel emissions for domestic heating were responsible for these levels.

  3. The Higher Education Enterprise.

    ERIC Educational Resources Information Center

    Ottinger, Cecilia A.

    1991-01-01

    Higher education not only contributes to the development of the human resources and intellectual betterment of the nation but is also a major economic enterprise. This research brief reviews and highlights data on the size and growth of higher education and illustrates how higher education institutions are preparing the future labor force. It…

  4. Medium-sized Au40(SR)24 and Au52(SR)32 nanoclusters with distinct gold-kernel structures and spectroscopic features

    NASA Astrophysics Data System (ADS)

    Xu, Wen Wu; Li, Yadong; Gao, Yi; Zeng, Xiao Cheng

    2016-01-01

    We have analyzed the structures of two medium-sized thiolate-protected gold nanoparticles (RS-AuNPs) Au40(SR)24 and Au52(SR)32 and identified the distinct structural features in their Au kernels [Sci. Adv., 2015, 1, e1500425]. We find that both Au kernels of the Au40(SR)24 and Au52(SR)32 nanoclusters can be classified as interpenetrating cuboctahedra. Simulated X-ray diffraction patterns of the RS-AuNPs with the cuboctahedral kernel are collected and then compared with the X-ray diffraction patterns of the RS-AuNPs of two other prevailing Au-kernels identified from previous experiments, namely the Ino-decahedral kernel and icosahedral kernel. The distinct X-ray diffraction patterns of RS-AuNPs with the three different types of Au-kernels can be utilized as signature features for future studies of structures of RS-AuNPs. Moreover, the simulated UV/Vis absorption spectra and Kohn-Sham orbital energy-level diagrams are obtained for the Au40(SR)24 and Au52(SR)32, on the basis of time-dependent density functional theory computation. The extrapolated optical band-edges of Au40(SR)24 and Au52(SR)32 are 1.1 eV and 1.25 eV, respectively. The feature peaks in the UV/Vis absorption spectra of the two clusters can be attributed to the d --> sp electronic transition. Lastly, the catalytic activities of the Au40(SR)24 and Au52(SR)32 are examined using CO oxidation as a probe. Both medium-sized thiolate-protected gold clusters can serve as effective stand-alone nanocatalysts.We have analyzed the structures of two medium-sized thiolate-protected gold nanoparticles (RS-AuNPs) Au40(SR)24 and Au52(SR)32 and identified the distinct structural features in their Au kernels [Sci. Adv., 2015, 1, e1500425]. We find that both Au kernels of the Au40(SR)24 and Au52(SR)32 nanoclusters can be classified as interpenetrating cuboctahedra. Simulated X-ray diffraction patterns of the RS-AuNPs with the cuboctahedral kernel are collected and then compared with the X-ray diffraction patterns of the RS

  5. Development of medium-size half-mask facepiece for male workers at a shipyard and its fit performance in Korea.

    PubMed

    Han, Don-Hee; Kim, David

    2014-01-01

    Ten years ago, three differently sized half-mask facepiece prototypes were constructed from silicon using computer graphics and statistical analysis to fit them according to Korean facial dimensions. The purpose of this study was to complete the medium-size half-mask respirator based on the prototype, which would provide an adequate fit performance for male workers at a shipyard, Hyundai Samho Heavy Industry Co., in Korea. The complete respirator--the hardness 55--was manufactured with existing accessories such as a filter, exhalation valve, and strap attached. The fit performance test was conducted by performing a quantitative fit-test on 48 male subjects: workers who usually wear half-mask respirators (Dobulife Tech Co., Model DM-911, Gwangju, Gyeonggi-do, Korea). The results showed that the hardness 55 provided male subject workers with much better fit performance than the existing mask constructed by the same company. Because softness of the material of the facepiece, in particular the inner part, influenced faceseal leakage, further research on developing better-fit respirator facepieces should consider carefully the fine control of material softness.

  6. Development of medium-size half-mask facepiece for male workers at a shipyard and its fit performance in Korea.

    PubMed

    Han, Don-Hee; Kim, David

    2014-01-01

    Ten years ago, three differently sized half-mask facepiece prototypes were constructed from silicon using computer graphics and statistical analysis to fit them according to Korean facial dimensions. The purpose of this study was to complete the medium-size half-mask respirator based on the prototype, which would provide an adequate fit performance for male workers at a shipyard, Hyundai Samho Heavy Industry Co., in Korea. The complete respirator--the hardness 55--was manufactured with existing accessories such as a filter, exhalation valve, and strap attached. The fit performance test was conducted by performing a quantitative fit-test on 48 male subjects: workers who usually wear half-mask respirators (Dobulife Tech Co., Model DM-911, Gwangju, Gyeonggi-do, Korea). The results showed that the hardness 55 provided male subject workers with much better fit performance than the existing mask constructed by the same company. Because softness of the material of the facepiece, in particular the inner part, influenced faceseal leakage, further research on developing better-fit respirator facepieces should consider carefully the fine control of material softness. PMID:24467771

  7. Medium-sized FLT3 internal tandem duplications confer worse prognosis than short and long duplications in a non-elderly acute myeloid leukemia cohort.

    PubMed

    Koszarska, Magdalena; Meggyesi, Nora; Bors, Andras; Batai, Arpad; Csacsovszki, Otto; Lehoczky, Eniko; Adam, Emma; Kozma, Andras; Lovas, Nora; Sipos, Andrea; Krahling, Tunde; Dolgos, Janos; Remenyi, Peter; Fekete, Sandor; Masszi, Tamas; Tordai, Attila; Andrikovics, Hajnalka

    2014-07-01

    Internal tandem duplications (ITDs) of the fms-like tyrosine kinase 3 (FLT3) gene occur in about 25% of patients with adult acute myeloid leukemia (AML). The aim of our study was to investigate the frequency of FLT3-ITD mutations followed by a detailed analysis of the mutational load and size of ITD insertions in a cohort consisting of 324 patients younger than 60 years old and treated with curative intention. FLT3-ITD alone did not influence overall survival (OS) or disease-free survival (DFS). We observed worse OS and DFS for patients with high mutational load indicative for loss of the FLT3 wild type allele (p = 0.010, p = 0.038, respectively). In multivariate analyses, patients with FLT3-ITD(48-60bp) showed worse OS and DFS compared to other groups (FLT3-ITD(neg), FLT3-ITD (< 48b), FLT3-ITD (> 60bp); p = 0.014, p = 0.019, respectively). Our novel observation suggested that not only high FLT3-ITD load, but also medium-sized ITD insertions (48-60 bp) represented an adverse prognostic subgroup of patients with AML.

  8. The control system of the 12-m medium-size telescope prototype: a test-ground for the CTA array control

    NASA Astrophysics Data System (ADS)

    Oya, I.; Anguner, E. A.; Behera, B.; Birsin, E.; Fuessling, M.; Lindemann, R.; Melkumyan, D.; Schlenstedt, S.; Schmidt, T.; Schwanke, U.; Sternberger, R.; Wegner, P.; Wiesand, S.

    2014-07-01

    The Cherenkov Telescope Array (CTA) will be the next generation ground-based very-high energy -ray observatory. CTA will consist of two arrays: one in the Northern hemisphere composed of about 20 telescopes, and the other one in the Southern hemisphere composed of about 100 telescopes, both arrays containing telescopes of different sizes and types and in addition numerous auxiliary devices. In order to provide a test-ground for the CTA array control, the steering software of the 12-m medium size telescope (MST) prototype deployed in Berlin has been implemented using the tools and design concepts under consideration to be used for the control of the CTA array. The prototype control system is implemented based on the Atacama Large Millimeter/submillimeter Array (ALMA) Common Software (ACS) control middleware, with components implemented in Java, C++ and Python. The interfacing to the hardware is standardized via the Object Linking and Embedding for Process Control Unified Architecture (OPC UA). In order to access the OPC UA servers from the ACS framework in a common way, a library has been developed that allows to tie the OPC UA server nodes, methods and events to the equivalents in ACS components. The front-end of the archive system is able to identify the deployed components and to perform the sampling of the monitoring points of each component following time and value change triggers according to the selected configurations. The back-end of the archive system of the prototype is composed by two different databases: MySQL and MongoDB. MySQL has been selected as storage of the system configurations, while MongoDB is used to have an efficient storage of device monitoring data, CCD images, logging and alarm information. In this contribution, the details and conclusions on the implementation of the control software of the MST prototype are presented.

  9. A simulation study of the energy-efficient options for upgrading and retrofitting a medium-size municipal wastewater treatment plant.

    PubMed

    Mucha, Zbigniew; Mikosz, Jerzy

    2016-10-01

    Many municipal wastewater treatment plants are retrofitted with membrane filtration that replaces secondary clarification. Such a solution saves space and improves overall treatment efficiency but at the cost of increased energy consumption and reduced potential for energy recovery from sewage sludge. Thus, the plant takes a step back from reaching energy self-sufficiency. In the presented case study, two alternative upgrade options were simulated for a medium-size municipal wastewater treatment plant in Poland: the first one assumed optimization of the existing bioreactor, and the other - installation of microfiltration membrane units inside the bioreactor. In both cases, anaerobic digestion of waste sludge with biogas utilization is planned. The results have shown that while under both upgrade options, the plant's capacity can be effectively increased by approximately 50%, their effects on the plant's energy balance will be very different. Although the installation of membrane modules accompanied by the construction of anaerobic digestion tanks improves the plant's energy balance, it will remain negative. The option of optimizing the existing biological treatment system produces a positive energy balance with more energy produced from biogas than consumed. Thus, the plant is able to approach energy self-sufficiency. It has been concluded that retrofitting the plants with membrane filtration is not always the best option from the energy balance point of view and it should be preceded with a detailed analysis on a case-by-case basis.

  10. Size-controllable synthesis of trimetallic RhPdPt island-shaped nanoalloys with enhanced electrocatalytic performance for ethanol oxidation in alkaline medium.

    PubMed

    Huang, Da-Bing; He, Pei-Lei; Yuan, Qiang; Wang, Xun

    2015-03-01

    Size-controllable, high-yield, island-shaped RhPdPt trimetallic nanocrystals with sub-2.0 nm islands have been successfully synthesized through a facile aqueous solution approach. The results of X-ray diffraction (XRD), energy-dispersive X-ray (EDX) line scanning and elemental mapping analysis showed the as-synthesized RhPdPt nanocrystals are alloy structures. These island-shaped RhPdPt trimetallic nanoalloys showed a composition-dependent electrocatalytic performance for ethanol oxidation in alkaline medium. Due to the special structure and intermetallic synergies, the Rh10Pd40Pt50 nanoalloys exhibited an enhanced catalytic activity and durability relative to island-shaped Pd50Pt50 bimetallic nanoalloys and commercial Pt black. The peak current density for Rh10Pd40Pt50 nanoalloys was 1.81 and 1.38 times that for commercial Pt black and Pd50Pt50 nanoalloys, respectively. In addition, the peak potential on Rh10Pd40Pt50 nanoalloys decreased 42 mV relative to commercial Pt black and Pd50Pt50 nanoalloys.

  11. Analysis of Socio-demographics, Self-rated Health, Social Capital, and Happiness in a Medium-Sized Healthy City, Republic of Korea

    PubMed Central

    Jo, Heui Sug; Moon, Ji Young; Kim, Bong Gi; Nam, Eun Woo

    2015-01-01

    Background This study explores the relationships between social capital, self-rated health, and happiness and suggests ways to improve the happiness level of a community. Methods The survey was conducted with 445 people using stratified random sampling in a medium-sized city in Korea. Collected information included socio-demographic characteristics, social capital, self-rated health, and happiness. Results Among the demographic characteristics, age had a statistically significant association with happiness level. People in their 40s (OR = 0.33, 95% CI = 0.13–0.88) and 50s (OR = 0.19, 95% CI = 0.06–0.57) were less happy than people of other ages. Married people (OR = 4.58, CI = 1.99–10.53) were more likely to have a high happiness level compared to unmarried people. Cognitive social capital (OR = 1.34, CI = 1.19–1.51) and self-rated health (OR = 2.22, CI = 1.59–3.09) were positively associated with happiness. Conclusion The results suggest that social capital and level of health are determinants of subjective happiness. Public policies and programs for improving social capital are needed to support happiness among community residents. PMID:26770893

  12. A simulation study of the energy-efficient options for upgrading and retrofitting a medium-size municipal wastewater treatment plant.

    PubMed

    Mucha, Zbigniew; Mikosz, Jerzy

    2016-10-01

    Many municipal wastewater treatment plants are retrofitted with membrane filtration that replaces secondary clarification. Such a solution saves space and improves overall treatment efficiency but at the cost of increased energy consumption and reduced potential for energy recovery from sewage sludge. Thus, the plant takes a step back from reaching energy self-sufficiency. In the presented case study, two alternative upgrade options were simulated for a medium-size municipal wastewater treatment plant in Poland: the first one assumed optimization of the existing bioreactor, and the other - installation of microfiltration membrane units inside the bioreactor. In both cases, anaerobic digestion of waste sludge with biogas utilization is planned. The results have shown that while under both upgrade options, the plant's capacity can be effectively increased by approximately 50%, their effects on the plant's energy balance will be very different. Although the installation of membrane modules accompanied by the construction of anaerobic digestion tanks improves the plant's energy balance, it will remain negative. The option of optimizing the existing biological treatment system produces a positive energy balance with more energy produced from biogas than consumed. Thus, the plant is able to approach energy self-sufficiency. It has been concluded that retrofitting the plants with membrane filtration is not always the best option from the energy balance point of view and it should be preceded with a detailed analysis on a case-by-case basis. PMID:26878434

  13. The effect of an electronic medicine dispenser on diversion of buprenorphine-naloxone-experience from a medium-sized Finnish city.

    PubMed

    Uosukainen, Hanna; Pentikäinen, Hannu; Tacke, Ulrich

    2013-07-01

    Providing unobserved opioid substitution treatment (OST) safely is a major challenge. This study examined whether electronic medicine dispensers (EMDs) can reduce diversion of take-home buprenorphine-naloxone (BNX) in a medium-sized Finnish city. All BNX treated OST patients in Kuopio received their take-home BNX in EMDs for 4months. EMDs' effect on diversion was investigated using questionnaires completed by patients (n=37) and treatment staff (n=19), by survey at the local needle exchange service and by systematic review of drug screen data from the Kuopio University Hospital. The majority of patients (n=21, 68%) and treatment staff (n=11, 58%) preferred to use EMDs for the safe storage of tablets. Five patients (16%) declared that EMDs had prevented them from diverting BNX. However, EMDs had no detectable effect on the availability or origin of illegal BNX or on the hospital-treated buprenorphine-related health problems. EMDs may improve the safety of storage of take-home BNX, but their ability to prevent diversion needs further research. PMID:23433750

  14. The effect of air pollutants on birth weight in medium-sized towns in the state of São Paulo☆

    PubMed Central

    Santos, Veridiana de Paula; de Medeiros, Andréa Paula Peneluppi; de Lima, Thaiza Agostini Córdoba; Nascimento, Luiz Fernando Costa

    2014-01-01

    OBJECTIVE: To investigate the effect of air pollution on birth weight in a medium-sized town in the State of São Paulo, Southeast Brazil. METHODS: Cross-sectional study using data from live births of mothers residing in São José dos Campos from 2005 to 2009. Data was obtained from the Department of Information and Computing of the Brazilian Unified Health System. Air pollutant data (PM10, SO2, and O3) and daily averages of their concentrations were obtained from the Environmental Sanitation & Technology Company. Statistical analysis was performed by linear and logistic regressions using the Excel and STATA v.7 software programs. RESULTS: Maternal exposure to air pollutants was not associated with low birth weight, with the exception of exposure to SO2 within the last month of pregnancy (OR=1.25; 95% CI=1.00-1.56). Maternal exposure to PM10 and SO2 during the last month of pregnancy led to lower weight at birth (0.28g and 3.15g, respectively) for each 1mg/m3 increase in the concentration of these pollutants, but without statistical significance. CONCLUSIONS: This study failed to identify a statistically significant association between the levels of air pollutants and birth weight, with the exception of exposure to SO2 within the last month of pregnancy. PMID:25510993

  15. Ambient air levels of volatile organic compounds (VOC) and nitrogen dioxide (NO2) in a medium size city in Northern Spain.

    PubMed

    Parra, M A; Elustondo, D; Bermejo, R; Santamaría, J M

    2009-01-15

    Ambient concentrations of volatile organic compounds (VOC) and nitrogen dioxide (NO2) were measured by means of passive sampling at 40 sampling points in a medium-size city in Northern Spain, from June 2006 to June 2007. VOC and NO2 samplers were analysed by thermal desorption followed by gas chromatography/mass-selective detector and by visible spectrophotometry, respectively. Mean concentrations of benzene, toluene, ethylbenzene, xylenes, propylbenzene, trimethylbenzenes, and NO(2) were 2.84, 13.26, 2.15, 6.01, 0.59, 1.32 and 23.17 microg m(-3) respectively, and found to be highly correlated. Their spatial distribution showed high differences in small distances and pointed to traffic as the main emission source of these compounds. The lowest levels of VOC and NO2 occurred during summer, owing to the increase in solar radiation and to lower traffic densities. Mean concentrations of benzene and NO2 exceeded the European limits at some of the monitored points.

  16. Medium- and large-sized mammals in a steppic savanna area of the Brazilian Pampa: survey and conservation issues of a poorly known fauna.

    PubMed

    Espinosa, C C; Galiano, D; Kubiak, B B; Marinho, J R

    2016-02-01

    The wildlife of the Brazilian Pampa is threatened by large-scale habitat loss, due in particular to the expansion of soybean cultivation and the conversion of grasslands areas into extensive areas of silviculture. It is essential to study how the mammal fauna copes with the highly fragmented, human-influenced, non-protected landscape. Our study presents the results of a survey of the large- and medium-sized mammals of a typical human-influenced steppic savanna area of the Pampa biome. The survey was conducted exclusively with the use of camera traps over a period of 16 months. The relative frequencies of species in the area were evaluated. We recorded 18 species, some of them locally threatened (Tamandua tetradactyla, Alouatta caraya, Leopardus colocolo, Leopardus geoffroyi, Leopardus wiedii, Puma yagouaroundi, Mazama gouazoubira and Cuniculus paca). Several species were found to thrive in the area; however, many species were considered rare, and undoubtedly new species could be recorded if we continued the sampling. Our results contribute to the knowledge of faunal diversity in the Pampa biome and associated habitats, warn about threats and provide support for conservation measures.

  17. Efficiency of perturbation-selection and its orbital dependence in the SAC-CI calculations for valence excitations of medium-size molecules.

    PubMed

    Fukuda, Ryoichi; Ehara, Masahiro

    2014-11-15

    The efficiency and accuracy of the perturbation-selection used in the symmetry-adapted cluster-configuration interaction (SAC-CI) calculations are investigated for several low-lying valence excited states of 21 medium-size molecules, including typical chromophores with heterocyclic macrocycles (free-base porphine, coumarin, indole, and BODIPY), nucleobases, amino acids (tyrosine and tryptophan), polycyclic aromatic hydrocarbons, and organometallics (ferrocene and Re(bpy)(CO)4+1). Benchmark SAC-CI calculations with up to 110 million operators are performed. The efficiency of the perturbation-selection depends on the molecular orbitals (MOs); therefore, the canonical MO and localized MO (LMO) obtained by Pipek-Mezey's method are examined. Except for the highly symmetric molecules, using LMOs improves the efficiency and accuracy of the perturbation-selection. With using LMOs and perturbation-selection, sufficiently reliable results can be obtained in less than 10% of the computational costs required for the full-dimensional calculations. The perturbation-selection with LMOs is suggested to be a promising method for excited states in larger molecular systems.

  18. Decontamination efficacy of three commercial-off-the-shelf (COTS) sporicidal disinfectants on medium-sized panels contaminated with surrogate spores of Bacillus anthracis.

    PubMed

    Edmonds, Jason M; Sabol, Jonathan P; Rastogi, Vipin K

    2014-01-01

    In the event of a wide area release and contamination of a biological agent in an outdoor environment and to building exteriors, decontamination is likely to consume the Nation's remediation capacity, requiring years to cleanup, and leading to incalculable economic losses. This is in part due to scant body of efficacy data on surface areas larger than those studied in a typical laboratory (5×10-cm), resulting in low confidence for operational considerations in sampling and quantitative measurements of prospective technologies recruited in effective cleanup and restoration response. In addition to well-documented fumigation-based cleanup efforts, agencies responsible for mitigation of contaminated sites are exploring alternative methods for decontamination including combinations of disposal of contaminated items, source reduction by vacuuming, mechanical scrubbing, and low-technology alternatives such as pH-adjusted bleach pressure wash. If proven effective, a pressure wash-based removal of Bacillus anthracis spores from building surfaces with readily available equipment will significantly increase the readiness of Federal agencies to meet the daunting challenge of restoration and cleanup effort following a wide-area biological release. In this inter-agency study, the efficacy of commercial-of-the-shelf sporicidal disinfectants applied using backpack sprayers was evaluated in decontamination of spores on the surfaces of medium-sized (∼1.2 m2) panels of steel, pressure-treated (PT) lumber, and brick veneer. Of the three disinfectants, pH-amended bleach, Peridox, and CASCAD evaluated; CASCAD was found to be the most effective in decontamination of spores from all three panel surface types.

  19. Increased excitability of medium-sized dorsal root ganglion neurons by prolonged interleukin-1β exposure is K+ channel dependent and reversible

    PubMed Central

    Stemkowski, Patrick L; Noh, Myung-chul; Chen, Yishen; Smith, Peter A

    2015-01-01

    Chronic constriction injury of rat sciatic nerve promotes signs of neuropathic pain. This is associated with an increase in the level of interleukin 1β (IL-1β) in primary afferents that peaks at 7 days. This initial cytokine exposure has been proposed to trigger an enduring alteration in neuronal phenotype that underlies chronic hyper-excitability in sensory nerves, which initiates and maintains chronic neuropathic pain. We have shown previously that 5–6 days of exposure of rat dorsal root ganglia (DRGs) to 100 pm IL-1β increases the excitability of medium-sized neurons. We have now found using whole-cell recording that this increased excitability reverts to control levels within 3–4 days of cytokine removal. The effects of IL-1β were dominated by changes in K+ currents. Thus, the amplitudes of A-current, delayed rectifier and Ca2+-sensitive K+ currents were reduced by ∼68%, ∼64% and ∼36%, respectively. Effects of IL-1β on other cation currents were modest by comparison. There was thus a slight decrease in availability of high voltage-activated Ca2+ channel current, a small increase in rates of activation of hyperpolarization-activated cyclic nucleotide-gated channel current (IH), and a shift in the voltage dependence of activation of tetrodotoxin-sensitive sodium current (TTX-S INa) to more negative potentials. It is unlikely, therefore, that direct interaction of IL-1β with DRG neurons initiates an enduring phenotypic shift in their electrophysiological properties following sciatic nerve injury. Persistent increases in primary afferent excitability following nerve injury may instead depend on altered K+ channel function and on the continued presence of slightly elevated levels IL-1β and other cytokines. PMID:26110238

  20. Predictors of a Desire to be Helpful to Professional Nurses Among Japanese Nursing Assistants in Small- to Medium-Sized Hospitals.

    PubMed

    Kudo, Yasushi; Kono, Keiko; Toyoshima, Yasuko; Sugisaki, Hitomi; Matsuhashi, Ayako; Tsutsumi, Akizumi

    2016-06-01

    Registered nurses and licensed practical nurses have been educated as professional nurses. Professional nurses can concentrate on their jobs requiring a high degree of expertise with help they get from nursing assistants.If professional nurses have improper attitudes toward nursing assistants, it is most likely that the nursing assistants will not help them to the best of their ability. We investigated nursing assistants' impressions regarding professional nurses' attitudes, and what effects nursing assistants' impressions have on their "desire to be helpful to professional nurses." The study design was a cross sectional study. Twenty-five small- to medium-sized hospitals with 55 to 458 beds were included in this study. The analyzed subjects were 642 nursing assistants (96 males, 546 females). Factor analyses were conducted to extract the factors of nursing assistants' impressions regarding professional nurses' attitudes. Multiple linear regression analysis was conducted to investigate the predictors of "desire to be helpful to professional nurses." We discovered 5 factors: 1. professional nurses' model behavior, 2. manner dealing with nursing assistants, 3. respect for nursing assistants' passion for their work, 4. respect for nursing assistants' work, and 5. enhancing the ability of nursing assistants to do their work. The "desire to be helpful to professional nurses" was significantly associated with "professional nurses' model behavior," "manner dealing with nursing assistants" and "respect for nursing assistants' passion for their work." Factors 1 to 3 are fundamental principles when people establish appropriate relationships. Professional nurses must consider these fundamentals in their daily work in order to get complete cooperation from nursing assistants. PMID:27302725

  1. Regional and cell-type-specific effects of DAMGO on striatal D1 and D2 dopamine receptor-expressing medium-sized spiny neurons.

    PubMed

    Ma, Yao-Ying; Cepeda, Carlos; Chatta, Payush; Franklin, Lana; Evans, Christopher J; Levine, Michael S

    2012-03-08

    The striatum can be divided into the DLS (dorsolateral striatum) and the VMS (ventromedial striatum), which includes NAcC (nucleus accumbens core) and NAcS (nucleus accumbens shell). Here, we examined differences in electrophysiological properties of MSSNs (medium-sized spiny neurons) based on their location, expression of DA (dopamine) D1/D2 receptors and responses to the μ-opioid receptor agonist, DAMGO {[D-Ala(2)-MePhe(4)-Gly(ol)(5)]enkephalin}. The main differences in morphological and biophysical membrane properties occurred among striatal sub-regions. MSSNs in the DLS were larger, had higher membrane capacitances and lower Rin (input resistances) compared with cells in the VMS. RMPs (resting membrane potentials) were similar among regions except for D2 cells in the NAcC, which displayed a significantly more depolarized RMP. In contrast, differences in frequency of spontaneous excitatory synaptic inputs were more prominent between cell types, with D2 cells receiving significantly more excitatory inputs than D1 cells, particularly in the VMS. Inhibitory inputs were not different between D1 and D2 cells. However, MSSNs in the VMS received more inhibitory inputs than those in the DLS. Acute application of DAMGO reduced the frequency of spontaneous excitatory and inhibitory postsynaptic currents, but the effect was greater in the VMS, in particular in the NAcS, where excitatory currents from D2 cells and inhibitory currents from D1 cells were inhibited by the largest amount. DAMGO also increased cellular excitability in the VMS, as shown by reduced threshold for evoking APs (action potentials). Together the present findings help elucidate the regional and cell-type-specific substrate of opioid actions in the striatum and point to the VMS as a critical mediator of DAMGO effects.

  2. Drug-primed reinstatement of cocaine seeking in mice: increased excitability of medium-sized spiny neurons in the nucleus accumbens

    PubMed Central

    Ma, Yao-Ying; Henley, Sandy M.; Toll, Jeff; Jentsch, James D.; Evans, Christopher J.; Levine, Michael S.; Cepeda, Carlos

    2013-01-01

    To examine the mechanisms of drug relapse, we first established a model for cocaine IVSA (intravenous self-administration) in mice, and subsequently examined electrophysiological alterations of MSNs (medium-sized spiny neurons) in the NAc (nucleus accumbens) before and after acute application of cocaine in slices. Three groups were included: master mice trained by AL (active lever) pressings followed by IV (intravenous) cocaine delivery, yoked mice that received passive IV cocaine administration initiated by paired master mice, and saline controls. MSNs recorded in the NAc shell in master mice exhibited higher membrane input resistances but lower frequencies and smaller amplitudes of sEPSCs (spontaneous excitatory postsynaptic currents) compared with neurons recorded from saline control mice, whereas cells in the NAc core had higher sEPSCs frequencies and larger amplitudes. Furthermore, sEPSCs in MSNs of the shell compartment displayed longer decay times, suggesting that both pre- and postsynaptic mechanisms were involved. After acute re-exposure to a low-dose of cocaine in vitro, an AP (action potential)-dependent, persistent increase in sEPSC frequency was observed in both NAc shell and core MSNs from master, but not yoked or saline control mice. Furthermore, re-exposure to cocaine induced membrane hyperpolarization, but concomitantly increased excitability of MSNs from master mice, as evidenced by increased membrane input resistance, decreased depolarizing current to generate APs, and a more negative Thr (threshold) for firing. These data demonstrate functional differences in NAc MSNs after chronic contingent versus non-contingent IV cocaine administration in mice, as well as synaptic adaptations of MSNs before and after acute re-exposure to cocaine. Reversing these functional alterations in NAc could represent a rational target for the treatment of some reward-related behaviors, including drug addiction. PMID:24000958

  3. Distributed simulation of long-term hydrological processes in a medium-sized periurban catchment under changing land use and rainwater management.

    NASA Astrophysics Data System (ADS)

    Labbas, Mériem; Braud, Isabelle; Branger, Flora; Kralisch, Sven

    2013-04-01

    Growing urbanization and related anthropogenic processes have a high potential to influence hydrological process dynamics. Typical consequences are an increase of surface imperviousness and modifications of water flow paths due to artificial channels and barriers (combined and separated system, sewer overflow device, roads, ditches, etc.). Periurban catchments, at the edge of large cities, are especially affected by fast anthropogenic modifications. They usually consist of a combination of natural areas, rural areas with dispersed settlements and urban areas mostly covered by built zones and spots of natural surfaces. In the context of the European Water Framework Directive (2000) and the Floods Directive (2007), integrated and sustainable solutions are needed to reduce flooding risks and river pollution at the scale of urban conglomerations or whole catchments. Their thorough management requires models able to assess the vulnerability of the territory and to compare the impact of different rainwater management options and planning issues. To address this question, we propose a methodology based on a multi-scale distributed hydrological modelling approach. It aims at quantifying the impact of ongoing urbanization and stormwater management on the long-term hydrological cycle in medium-sized periurban watershed. This method focuses on the understanding and formalization of dominant periurban hydrological processes from small scales (few ha to few km2) to larger scales (few hundred km2). The main objectives are to 1) simulate both urban and rural hydrological processes and 2) test the effects of different long-term land use and water management scenarios. The method relies on several tools and data: a distributed hydrological model adapted to the characteristics of periurban areas, land use and land cover maps from different dates (past, present, future) and information about rainwater management collected from local authorities. For the application of the method, the

  4. Assessing hydrological regime sensitivity to climate change in a convective rainfall environment: a case study of medium-sized eastern Mediterranean catchments

    NASA Astrophysics Data System (ADS)

    Peleg, Nadav; Shamir, Eylon; Georgakakos, Konstantine; Morin, Efrat

    2015-04-01

    A modeling framework is formulated and applied to assess the sensitivity of the hydrological regime of catchments with respect to projected climate change. The study uses likely rainfall scenarios with high spatiotemporal resolution that are dependent on projected changes in the driving regional meteorological synoptic systems. The framework was applied to a case study in two medium-sized Mediterranean catchments in Israel, affected by convective rainfall, by combining the HiReS-WG rainfall generator and the SACSMA hydrological model. The projected climate change impact on the hydrological regime was examined for the RCP4.5 and RCP8.5 emission scenarios, comparing the beginning of the 21st century and the mid-21st-century periods from General Circulation Models simulations available from CMIP5. Focusing on changes in the occurrence frequency of regional synoptic systems and their impact on rainfall and streamflow patterns, we find that the mean annual rainfall over the catchments is projected to be reduced by 15% (outer range 2-23%) and 18% (7-25%) for the RCP4.5 sand RCP8.5 emission scenarios, respectively. The mean annual streamflow volumes are projected to be reduced by 45% (10-60%) and 47% (16-66%). Moreover, the streamflow season in these ephemeral streams is projected to be shorter by 22% and 26-28% for the RCP4.5 and RCP8.5, respectively. The amplification in reduction of streamflow volumes relative to rainfall amounts is related to the projected reduction in soil moisture, as a result of fewer rainfall events and longer dry spells between rainfall events during the wet season. The dominant factors for the projected reduction in rainfall amount were the reduction in occurrence of wet synoptic systems and the shortening of the wet synoptic systems durations. Changes in the occurrence frequency of the two dominant types of the regional wet synoptic systems (Active Red Sea Trough and Mediterranean low) were found to have a minor impact on the total rainfall.

  5. Association between intention to stay on the job and job satisfaction among Japanese nurses in small and medium-sized private hospitals.

    PubMed

    Kudo, Yasushi; Satoh, Toshihiko; Hosoi, Kaori; Miki, Takeo; Watanabe, Mitsuyasu; Kido, Shigeri; Aizawa, Yoshiharu

    2006-11-01

    In order to examine the relationship between the intention to stay on the job and job satisfaction among Japanese nurses, and to obtain clues for preventing turnover, we conducted a questionnaire survey. The subjects involved in the survey included 625 female nurses (registered nurses, licensed practical nurses and assistant nurses) working in 4 small and medium-sized private hospitals, excluding directors of nursing. Of the 625 questionnaires distributed, 556 (89.0%) were returned. After excluding the questionnaires with missing values, 480 questionnaires were analyzed (effective response rate, 76.8%). The average age of the respondents was 32.8 yr (range: 20-65). The content of the questionnaire was nurse attributes, job satisfaction (30 items) and intention to stay on the job. For job satisfaction, factor analysis (principal factor method and promax rotation) was performed, and factors with an eigenvalue of > or =1 were extracted. Six factors were extracted by factor analysis. These factors were interpreted as "Work as specialists" (1st factor), "Relationship with superiors" (2nd factor), "Comfortable life" (3rd factor), "Relationship among nurses" (4th factor), "Communication with physicians" (5th factor) and "Working conditions" (6th factor). The factor scores were calculated and used as a scale for the evaluation of job satisfaction. To investigate the factors associated with intention to stay on the job among nurses, the standard partial regression coefficient was computed by multiple linear regression analysis, with intention to stay on the job as the dependent variable, and nurse attributes and job satisfaction (factor scores) as independent variables. Various factors including the organizational culture of each hospital may affect the relationship between job satisfaction and the intention to stay on the job. In order to adjust for these factors, differences among hospitals were included in the statistical model as independent variables. The result of the

  6. Medium-Sized Mammals around a Radioactive Liquid Waste Lagoon at Los Alamos National Laboratory: Uptake of Contaminants and Evaluation of Radio-Frequency Identification Technology

    SciTech Connect

    Leslie A. Hansen; Phil R. Fresquez; Rhonda J. Robinson; John D. Huchton; Teralene S. Foxx

    1999-11-01

    Use of a radioactive liquid waste lagoon by medium-sized mammals and levels of tritium, other selected radionuclides, and metals in biological tissues of the animals were documented at Technical Area 53 (TA-53) of Los Alamos National Laboratory during 1997 and 1998. Rock squirrel (Spermophilus variegates), raccoon (Procyon lotor), striped skunk (Mephitis mephitis), and bobcat (Lynx rufus) were captured at TA-53 and at a control site on the Santa Fe National Forest. Captured animals were anesthetized and marked with radio-frequency identification (RFD) tags and/or ear tags. We collected urine and hair samples for tritium and metals (aluminum, antimony, arsenic, barium, beryllium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, and thallium) analyses, respectively. In addition, muscle and bone samples from two rock squirrels collected from each of TA-53, perimeter, and regional background sites were tested for tritium, {sup 137}Cs, {sup 90}Sr, {sup 238}Pu, {sup 239,240}Pu, {sup 241}Am, and total uranium. Animals at TA-53 were monitored entering and leaving the lagoon area using a RFID monitor to read identification numbers from the RFID tags of marked animals and a separate camera system to photograph all animals passing through the monitor. Cottontail rabbit (Sylvilagus spp.), rock squirrel, and raccoon were the species most frequently photographed going through the RFID monitor. Less than half of all marked animals in the lagoon area were detected using the lagoon. Male and female rock squirrels from the lagoon area had significantly higher tritium concentrations compared to rock squirrels from the control area. Metals tested were not significantly higher in rock squirrels from TA-53, although there was a trend toward increased levels of lead in some individuals at TA-53. Muscle and bone samples from squirrels in the lagoon area appeared to have higher levels of tritium, total uranium, and {sup 137}Cs than samples collected from perimeter and

  7. Is Enterprise Education Relevant to Social Enterprise?

    ERIC Educational Resources Information Center

    Bridge, Simon

    2015-01-01

    Purpose: Both enterprise education and social enterprise have become fashionable but what, if any, should be the connections between them? The purpose of this paper is to explore those connections and to reflect on what relevance the two concepts might have for each other. Design/methodology/approach: Both enterprise education and social…

  8. Inhibition of Hyperpolarization-Activated Cation Current in Medium-Sized DRG Neurons Contributed to the Antiallodynic Effect of Methylcobalamin in the Rat of a Chronic Compression of the DRG.

    PubMed

    Zhang, Ming; Han, Wenjuan; Zheng, Jianyong; Meng, Fancheng; Jiao, Xiying; Hu, Sanjue; Xu, Hui

    2015-01-01

    Recently several lines of evidence demonstrated that methylcobalamin (MeCbl) might have potential analgesic effect in experimental and clinical studies. However, it was reported that MeCbl had no effect on treating lumbar spinal stenosis induced pain. Thus, the effects of short-term and long-term administration of MeCbl were examined in the chronic compression of dorsal root ganglion (CCD) model. We found that mechanical allodynia was significantly inhibited by a continuous application of high dose and a single treatment of a super high dose of MeCbl. Little is known about mechanisms underlying the analgesia of MeCbl. We examined the effect of MeCbl on the spontaneous activity (SA), the excitability, and hyperpolarization-activated nonselective cation ion current in compressed medium-sized dorsal root ganglion (DRG) neurons using extracellular single fiber recording in vivo and whole-cell patch clamp in vitro. We found that MeCbl significantly inhibited the SA of A-type sensory neurons in a dose-dependent manner and inhibited the excitability of medium-sized DRG neurons. In addition, MeCbl also decreased I h current density in injured medium-sized DRG neurons. Our results proved that MeCbl might exert an analgesic effect through the inhibition I h current and then might inhibit the hyperexcitability of primary sensory neurons under neuropathic pain state.

  9. Enterprise analytics.

    SciTech Connect

    Spomer, Judith E.

    2010-09-01

    Ranking search results is a thorny issue for enterprise search. Search engines rank results using a variety of sophisticated algorithms, but users still complain that search can't ever seem to find anything useful or relevant! The challenge is to provide results that are ranked according to the users definition of relevancy. Sandia National Laboratories has enhanced its commercial search engine to discover user preferences, re-ranking results accordingly. Immediate positive impact was achieved by modeling historical data consisting of user queries and subsequent result clicks. New data is incorporated into the model daily. An important benefit is that results improve naturally and automatically over time as a function of user actions. This session presents the method employed, how it was integrated with the search engine,metrics illustrating the subsequent improvement to the users search experience, and plans for implementation with Sandia's FAST for SharePoint 2010 search engine.

  10. Thermo-electro-mechanical vibration analysis of size-dependent nanobeam resting on elastic medium under axial preload in presence of surface effect

    NASA Astrophysics Data System (ADS)

    Marzbanrad, Javad; Boreiry, Mahya; Shaghaghi, Gholam Reza

    2016-07-01

    In the present manuscript, a nonclassical beam theory is developed to analyze free vibration of piezoelectric nanobeam by considering surface effects resting on Winkler-Pasternak elastic medium and thermal loading with axial preload. The nonclassical Eringen theory is utilized to incorporate the length-scale parameter to account for the small-scale effect, while the Gurtin-Murdoch model is employed to inject the surface effects including surface elasticity, surface stress and surface density. The governing equations are derived using Hamilton's principle in the framework of Euler-Bernoulli beam theory. The governing partial differential equations of motions of system are reduced to a set of algebraic equations with the help of differential transformation method as a semi-analytical-numerical. The mathematical derivations and numerical results are presented in detail for various boundary conditions. Some numerical examples are illustrated in order to investigate the effect of several parameters such as the nonlocal parameter, piezoelectric voltage, surface effects, temperature change, axial preload and elastic medium parameters. Moreover, it is also indicated that the numerical results have good agreement with previous studies.

  11. Diode-pumped medium-aperture-size square Nd,Y:CaF2 rod amplifier for Inertial Confinement Fusion laser drivers

    NASA Astrophysics Data System (ADS)

    Tang, Xiongxin; Qiu, Jisi; Fan, Zhongwei; Su, Liangbi; Wang, Haocheng

    2016-08-01

    We demonstrate, for the first time, an 12 mm × 12 mm 0.5%Nd,5% Y:CaF2 crystal rod having a uniformly-distributed fluorescence spectrum and capable of operating as an amplifying medium at high repetition frequencies. A small gain of 2.7 is experimentally achieved at repetition frequency of 10 Hz for a pump center wavelength of 802 nm, power and absorption efficiency, 61.2 kW and 63.7%, respectively. Spatial-uniformity degradation of the output near-field beam distribution is observed, which should be attributed to the inhomogeneity of Nd,Y:CaF2 crystal. For a pump power of 61.2 kW, the stored energy of Nd,Y:CaF2 amplifier is 3.73 J. When the input energy is 50 mJ, the output laser energy is 1.4 J of extraction efficiency up to 37.53% after four-pass amplification.

  12. An Enterprise Ontology Building the Bases for Automatic Metadata Generation

    NASA Astrophysics Data System (ADS)

    Thönssen, Barbara

    'Information Overload' or 'Document Deluge' is a problem enterprises and Public Administrations alike are still dealing with. Although commercial products for Enterprise Content or Records Management are available since more than two decades, especially in Small and Medium Enterprises and Public Administrations they didn't get through. Because of the wide range of document types and formats full-text indexing is not sufficient, but assigning metadata manually is not possible. Thus, automatic, format-independent generation of metadata for (public) enterprise documents is needed. Using context to infer metadata automatically has been researched for example for web-documents or learning objects. If (public) enterprise objects were modelled 'machine understandable' they could be build the context for automatic metadata generation. The approach introduced in this paper is to model context (the (public) enterprise objects) in an ontology and using that ontology to infer content-related metadata.

  13. Improving Enterprise in Education

    ERIC Educational Resources Information Center

    Her Majesty's Inspectorate of Education, 2008

    2008-01-01

    "Improving Enterprise in Education" evaluates enterprise in education using a framework developed in direct response to a recommendation in "Determined to Succeed." The framework comprised quality indicators, chosen from the second edition of "How good is our school?" to focus on key features of enterprise in education: learners' experiences,…

  14. [Study on the types and water pollution driving forces of the typical and medium-small-sized cities in the southern China based on the analysis of water environment].

    PubMed

    Jiao, Shi-Xing; Wang, La-Chun; Huo, Yu; Chen, Chang-Chun; Teng, Juan

    2009-07-15

    According to the major pollution sources of urban water environment, 10 indexes such as industrial sewage quantity were closen to establish evaluation indexes system about the types and influencing factors of the typical and medium-small-sized cities in the southern China. Case studies of 16 typical and medium-small-sized cities were taken in Jiangsu, Zhejiang, Hubei and Anhui provinces. Combined with SPSS 11.0 cluster analysis results, city types were divided in reference to the values of water resources comprehensive pollution indexes and economical development indexes. The driving forces about city water environment pollution were studied by principal component analysis method. The result indicates that the 16 cities belong to two categories and four sub-categories, which are rich economy as well as light pollution of water environment and poor economy as well as heavy pollution of water environment. The influencing factors of water environment pollution are in sequence of industrial water pollution, agricultural no-point source pollution and urban domestic water pollution. The main factors of water environment pollution influenced I category cities, II as well as IV category cities and III category cities are industrial water pollution, urban domestic pollution and agricultural no-point source pollution respectively.

  15. Cage and tube structures of medium-sized zinc oxide clusters (ZnO)n (n=24, 28, 36, and 48).

    PubMed

    Wang, Baolin; Wang, Xiaoqiu; Chen, Guibin; Nagase, Shigeru; Zhao, Jijun

    2008-04-14

    Following our recent work which revealed that the lowest-energy structures of (ZnO)n (n=9-18) follow cage and tube structural growth patterns with stacks of small subunits of (ZnO)2 and (ZnO)3 [Wang et al., J. Phys. Chem. C 111, 4956 (2007)], we have extended the search for the most stable structures to some larger clusters, i.e., (ZnO)n (n=24, 28, 36, and 48) by using gradient-corrected density-functional theory (DFT). A number of starting configurations belonging to different structural motifs were generated from handmade constructions with chemical intuition and then optimized via DFT calculations. Within the size range studied, cage and tube structures were found to be the most preferred structural motifs for the (ZnO)n clusters. PMID:18412474

  16. Land cover and future climate effects on the provision of hydrological services: SWAT applied to a medium-sized watershed of northern Portugal

    NASA Astrophysics Data System (ADS)

    Carvalho-Santos, Claudia; Nunes, João Pedro; Monteiro, António T.; Hein, Lars; Honrado, João

    2015-04-01

    Land cover change and future climate conditions may influence the provision of hydrological services. Therefore, it is important to understand how these drivers will affect water supplies and water hazards mitigation, in order to support the planning and management of water resources. In this study, the separated and combined effects of land cover and future climate on the hydrology of the Vez watershed, northern Portugal, were evaluated. The Vez watershed (252 Km2) has a humid climate regime where precipitation is abundant all over the year (1500mm/yr), with exception of a summer with almost no rain. The SWAT (Soil and Water Assessment Tool) model was calibrated against daily discharge, sediments and nitrates, with good agreements between model predictions and field observations related with discharge; the calibration of sediments and nitrates can be considered adequate given the limitations of observed data. Four hypothetical land cover scenarios were applied under current climate conditions (eucalyptus/pine, oak, agriculture/vine and low vegetation). Results for land cover revealed that the option for one particular scenario would not compromise the overall provision of hydrological services. However, the eucalyptus/pine scenario could reduce the annual water quantity by 7%, and up to 17% in the summer period; and the agriculture/vine scenario could increase soil erosion and nitrate exports. For the future climate scenario, a statistical downscaling of four ensemble GCMs (General Circulation Models), bias-corrected with ground observations was done for 2021-40 and 2041-60, using the RCP 4.5 medium emissions scenario. An increase in temperature (annual: 1.6°C; summer: 2.02°C) and a decrease in precipitation (annual: -3.9%), more pronounced in summer (-25%) are expected in the Vez watershed. Although climate change has only a modest effect in the reduction of the total annual discharge (-7%), the effect on streamflow during summer can be more pronounced (between

  17. Effect of the borax mass and pre-spray medium temperature on droplet size and velocity vector distributions of intermittently sprayed starchy solutions.

    PubMed

    Naz, Muhammad Yasin; Sulaiman, Shaharin Anwar; Ariwahjoedi, Bambang

    2015-02-01

    Spray coating technology has demonstrated great potential in the slow release fertilizers industry. The better understanding of the key spray parameters benefits both the environment and low cost coating processes. The use of starch based materials to coat the slow release fertilizers is a new development. However, the hydraulic spray jet breakup of the non-Newtonian starchy solutions is a complex phenomenon and very little known. The aim of this research was to study the axial and radial distributions of the Sauter Mean Diameter (SMD) and velocity vectors in pulsing spray patterns of native and modified tapioca starch solutions. To meet the objective, high speed imaging and Phase Doppler Anemometry (PDA) techniques were employed to characterize the four compositions of the starch-urea-borax complex namely S0, S1, S2 and S3. The unheated solutions exhibited very high viscosities ranging from 2035 to 3030 cP. No jet breakup was seen at any stage of the nozzle operation at an injection pressure of 1-5 bar. However, at 80 °C temperature and 5 bar pressure, the viscosity was reduced to 455 to 638 cP and dense spray patterns emerged from the nozzle obscuring the PDA signals. The axial size distribution revealed a significant decrease in SMD along the spray centreline. The smallest axial SMD (51 to 79 μm) was noticed in S0 spray followed by S1, S2 and S3. Unlikely, the radial SMD in S0 spray did not vary significantly at any stage of the spray injection. This trend was attributed to the continuous growth of the surface wave instabilities on the native starch sheet. However, SMD obtained with S1, S2 and S3 varied appreciably along the radial direction. The mean velocity vector profiles followed the non-Gaussian distribution. The constant vector distributions were seen in the near nozzle regions, where the spray was in the phase of development. In far regions, the velocity vectors were poly-dispersed and a series of ups and downs were seen in the respective radial

  18. Effect of the borax mass and pre-spray medium temperature on droplet size and velocity vector distributions of intermittently sprayed starchy solutions.

    PubMed

    Naz, Muhammad Yasin; Sulaiman, Shaharin Anwar; Ariwahjoedi, Bambang

    2015-02-01

    Spray coating technology has demonstrated great potential in the slow release fertilizers industry. The better understanding of the key spray parameters benefits both the environment and low cost coating processes. The use of starch based materials to coat the slow release fertilizers is a new development. However, the hydraulic spray jet breakup of the non-Newtonian starchy solutions is a complex phenomenon and very little known. The aim of this research was to study the axial and radial distributions of the Sauter Mean Diameter (SMD) and velocity vectors in pulsing spray patterns of native and modified tapioca starch solutions. To meet the objective, high speed imaging and Phase Doppler Anemometry (PDA) techniques were employed to characterize the four compositions of the starch-urea-borax complex namely S0, S1, S2 and S3. The unheated solutions exhibited very high viscosities ranging from 2035 to 3030 cP. No jet breakup was seen at any stage of the nozzle operation at an injection pressure of 1-5 bar. However, at 80 °C temperature and 5 bar pressure, the viscosity was reduced to 455 to 638 cP and dense spray patterns emerged from the nozzle obscuring the PDA signals. The axial size distribution revealed a significant decrease in SMD along the spray centreline. The smallest axial SMD (51 to 79 μm) was noticed in S0 spray followed by S1, S2 and S3. Unlikely, the radial SMD in S0 spray did not vary significantly at any stage of the spray injection. This trend was attributed to the continuous growth of the surface wave instabilities on the native starch sheet. However, SMD obtained with S1, S2 and S3 varied appreciably along the radial direction. The mean velocity vector profiles followed the non-Gaussian distribution. The constant vector distributions were seen in the near nozzle regions, where the spray was in the phase of development. In far regions, the velocity vectors were poly-dispersed and a series of ups and downs were seen in the respective radial

  19. Innovation in Small and Medium Firms.

    ERIC Educational Resources Information Center

    Organisation for Economic Cooperation and Development, Paris (France). Committee for Scientific and Technical Personnel.

    A study analyzed the policies of 20 Organisation for Economic Cooperation and Development (OECD) member countries pertaining to small and medium enterprises (SMEs). Aims of the study were to assess the current role of SMEs as generators and users of innovations, to analyze the components of a favorable climate for innovation in SMEs, and to…

  20. Assessing the potential of Medium-Resolution Imaging Spectrometer (MERIS) and Moderate-Resolution Imaging Spectroradiometer (MODIS) data for monitoring total suspended matter in small and intermediate sized lakes and reservoirs

    NASA Astrophysics Data System (ADS)

    Tarrant, P. E.; Amacher, J. A.; Neuer, S.

    2010-09-01

    Satellite remote sensing has been used extensively for many years to monitor the open oceans and coastal waters. These methods have been extended more recently to the study of inland waters. In this study we consider the potential application of data from two ocean color sensors, Moderate-Resolution Imaging Spectroradiometer (MODIS) and Medium-Resolution Imaging Spectrometer (MERIS), for monitoring the levels of suspended solids in small and intermediate sized lakes and reservoirs. We measured total suspended matter (TSM) in four southwestern United States lakes, Roosevelt Lake, Saguaro Lake, Bartlett Lake, and Lake Pleasant, and compared these field data with images obtained from these medium resolution satellite sensors. Our regression analysis of the complete data set identified a linear relationship between the field TSM values and both MODIS 250 m data (r2 = 0.461) and MERIS 290 m data (r2 = 0.521). This relationship improved substantially when data from the smallest lake in the study (Saguaro Lake) were excluded from the analysis (r2 = 0.819 and r2 = 0.888, respectively). The resultant linear models produced estimates with a root-mean-square error (RMSE) ranging from 3.14 mg/L (MODIS) and 2.04 mg/L (MERIS) for all four lakes combined, improving to 1.32 mg/L (MODIS) and 0.47 mg/L (MERIS) for a lake-specific regression. These results suggest that these satellite sensors have the potential to effectively monitor TSM in lakes and reservoirs, although a minimum practical lake size does appear to exist.

  1. Lower vapor concentrations in solvent workplaces in larger-scale enterprises than in smaller-scale enterprises, and exceptions.

    PubMed

    Ukai, Hirohiko; Okamoto, Satoru; Takada, Shiro; Yamada, Chikahisa; Ikeda, Masayuki

    2004-04-01

    The aim of the present study was to investigate the relationship between environmental vapor concentrations in organic solvent workplaces and size of enterprises, and to examine if occupational hygiene conditions were better in larger-scale enterprises. For this purpose, a total of 3,567 solvent workplaces were surveyed for environmental solvent vapor concentrations in 1999 to 2002. The results were classified by the size of enterprises (taking the number of employees as an indicator) and by the type of solvent work. It was observed that the vapor concentration in a typical small-scale enterprise was approximately three times as high as that in the large-scale enterprise, although the administrative control levels were not exceeded in general. The proportion of testing and research work (with less use of organic solvents and thus low vapor concentrations) among all solvent workplaces was higher in large-scale enterprises than in small-scale enterprises. The vapor concentrations in this type of workplace did not differ however irrespective of the enterprise size. Further comparison in various types of solvent workplaces disclosed similar size-dependent difference in workplaces for degreasing, cleaning, wiping, printing, and surface coating. In painting and solvent-drying work, in contrast, there was no difference in environmental concentration regardless of the size of enterprises, possibly because environmental improvement of this type of workplaces was technically more difficult than others. Thus, it was concluded that large-scale enterprises generally had better control of work environments than small-scale enterprises, with possible exceptions of painting work and solvent-drying work. PMID:15128177

  2. A New Space Enterprise

    NASA Video Gallery

    Doug Cooke, Associate Administrator for the Office of Exploration Systems Mission Directorate, welcomes participants and introduces NASA's Exploration Enterprise Workshop, held from May 25-26 2010 ...

  3. Infrastructure for distributed enterprise simulation

    SciTech Connect

    Johnson, M.M.; Yoshimura, A.S.; Goldsby, M.E.

    1998-01-01

    Traditional discrete-event simulations employ an inherently sequential algorithm and are run on a single computer. However, the demands of many real-world problems exceed the capabilities of sequential simulation systems. Often the capacity of a computer`s primary memory limits the size of the models that can be handled, and in some cases parallel execution on multiple processors could significantly reduce the simulation time. This paper describes the development of an Infrastructure for Distributed Enterprise Simulation (IDES) - a large-scale portable parallel simulation framework developed to support Sandia National Laboratories` mission in stockpile stewardship. IDES is based on the Breathing-Time-Buckets synchronization protocol, and maps a message-based model of distributed computing onto an object-oriented programming model. IDES is portable across heterogeneous computing architectures, including single-processor systems, networks of workstations and multi-processor computers with shared or distributed memory. The system provides a simple and sufficient application programming interface that can be used by scientists to quickly model large-scale, complex enterprise systems. In the background and without involving the user, IDES is capable of making dynamic use of idle processing power available throughout the enterprise network. 16 refs., 14 figs.

  4. Enterprise Education as Pedagogy

    ERIC Educational Resources Information Center

    Jones, Brian; Iredale, Norma

    2010-01-01

    Purpose: This paper seeks to suggest that the most appropriate way to construe the concept of enterprise education is from a pedagogical viewpoint. Enterprise education as pedagogy is argued to be the most appropriate way to think about the concept and serves to demarcate it from entrepreneurship education, which is very much about business…

  5. The Enterprise Compass

    ERIC Educational Resources Information Center

    McCardle, Ken

    2005-01-01

    As a CIO leading an IT department through change and reorganization, the author developed the Enterprise Compass--a four-point guide to reaching goals and focusing achievement. The Enterprise Compass directs staff to look forward to future accomplishment, back for performance assessments, across campus for better understanding of practical working…

  6. Development in youth enterprises.

    PubMed

    Hamilton, Stephen F; Hamilton, Mary Agnes

    2012-01-01

    Business enterprises run by youth can create jobs and teach the principles of free enterprise but also convey skills that can be used by employees in large companies, as well as political activists and entrepreneurs. Research is needed to test the efficacy of this approach and identify its key components. PMID:22826167

  7. Development in youth enterprises.

    PubMed

    Hamilton, Stephen F; Hamilton, Mary Agnes

    2012-01-01

    Business enterprises run by youth can create jobs and teach the principles of free enterprise but also convey skills that can be used by employees in large companies, as well as political activists and entrepreneurs. Research is needed to test the efficacy of this approach and identify its key components.

  8. Exposure assessment in SMES: a low-cost approach to bring OHS services to small-scale enterprises.

    PubMed

    Seneviratne, Mahinda; Phoon, Wai On

    2006-01-01

    There is increased attention to improving occupational health and safety in small to medium-sized Enterprises (SMEs). The Workers Health Centre, a not-for-profit OHS service in western Sydney, assessed workplace exposures in two SMEs following intervention by regulatory agencies. A low-cost monitoring program for noise, airbone dust, fibers and chemicals was conducted at these two metal working industry workplaces. Results showed that exposure to the hazards were above the statutory limits and there was generally an unhealthy access to OHS information by the predominantly immigrant or low literate worker population, were identified. The potential for using a program of low-cost exposure assessments, accompanied by a strategy to provide OHSs information for workers in small-scale enterprises, is discussed.

  9. Crystallographic X-ray analyses of Yb@C(2v)(3)-C80 reveal a feasible rule that governs the location of a rare earth metal inside a medium-sized fullerene.

    PubMed

    Lu, Xing; Lian, Yongfu; Beavers, Christine M; Mizorogi, Naomi; Slanina, Zdenek; Nagase, Shigeru; Akasaka, Takeshi

    2011-07-20

    Single crystal X-ray diffraction studies of Yb@C(2v)(3)-C(80)·Ni(II)(OEP)·CS(2)·1.5C(6)H(6) (OEP = octaethylporphinate) reveal that a relatively flat region of the fullerene interacts with the Ni(II)(OEP) molecule, featuring shape-matching interactions. Surprisingly, it is found that the internal metal is located under a hexagonal carbon ring apart from the 2-fold axis of the C(2v)(3)-C(80) cage, presenting the first example of metallofullerenes with an asymmetrically positioned metal. Such an anomalous location of Yb(2+) is associated with its strong ability to pursue a large coordination number and the lack of hexagon along the C(2) axis of C(2v)(3)-C(80). It is accordingly assumed that a suitable cage hexagon is most likely to be preferred by the single rare earth metal to stay behind inside a medium-sized fullerene, such as C(80) and C(82).

  10. Localisation, Globalisation and SMEs in European Tourism: The "Virtual Enterprise" Model of Intervention.

    ERIC Educational Resources Information Center

    Davenport, Elisabeth

    2000-01-01

    Discussion of the effect of globalization on SMEs (small and medium enterprises) in Europe focuses on a case study of a current European Commission (EC) project, Net Quality, which is based on the virtual enterprise as an intervention model that may encourage small businesses to cooperate in strategic ventures. (Contains 29 references.)…

  11. Putting the enterprise into the enterprise system.

    PubMed

    Davenport, T H

    1998-01-01

    Enterprise systems present a new model of corporate computing. They allow companies to replace their existing information systems, which are often incompatible with one another, with a single, integrated system. By streamlining data flows throughout an organization, these commercial software packages, offered by vendors like SAP, promise dramatic gains in a company's efficiency and bottom line. It's no wonder that businesses are rushing to jump on the ES bandwagon. But while these systems offer tremendous rewards, the risks they carry are equally great. Not only are the systems expensive and difficult to implement, they can also tie the hands of managers. Unlike computer systems of the past, which were typically developed in-house with a company's specific requirements in mind, enterprise systems are off-the-shelf solutions. They impose their own logic on a company's strategy, culture, and organization, often forcing companies to change the way they do business. Managers would do well to heed the horror stories of failed implementations. FoxMeyer Drug, for example, claims that its system helped drive it into bankruptcy. Drawing on examples of both successful and unsuccessful ES projects, the author discusses the pros and cons of implementing an enterprise system, showing how a system can produce unintended and highly disruptive consequences. Because of an ES's profound business implications, he cautions against shifting responsibility for its adoption to technologists. Only a general manager will be able to mediate between the imperatives of the system and the imperatives of the business.

  12. A catalog of automated analysis methods for enterprise models.

    PubMed

    Florez, Hector; Sánchez, Mario; Villalobos, Jorge

    2016-01-01

    Enterprise models are created for documenting and communicating the structure and state of Business and Information Technologies elements of an enterprise. After models are completed, they are mainly used to support analysis. Model analysis is an activity typically based on human skills and due to the size and complexity of the models, this process can be complicated and omissions or miscalculations are very likely. This situation has fostered the research of automated analysis methods, for supporting analysts in enterprise analysis processes. By reviewing the literature, we found several analysis methods; nevertheless, they are based on specific situations and different metamodels; then, some analysis methods might not be applicable to all enterprise models. This paper presents the work of compilation (literature review), classification, structuring, and characterization of automated analysis methods for enterprise models, expressing them in a standardized modeling language. In addition, we have implemented the analysis methods in our modeling tool.

  13. Agent-based enterprise integration

    SciTech Connect

    N. M. Berry; C. M. Pancerella

    1998-12-01

    The authors are developing and deploying software agents in an enterprise information architecture such that the agents manage enterprise resources and facilitate user interaction with these resources. The enterprise agents are built on top of a robust software architecture for data exchange and tool integration across heterogeneous hardware and software. The resulting distributed multi-agent system serves as a method of enhancing enterprises in the following ways: providing users with knowledge about enterprise resources and applications; accessing the dynamically changing enterprise; locating enterprise applications and services; and improving search capabilities for applications and data. Furthermore, agents can access non-agents (i.e., databases and tools) through the enterprise framework. The ultimate target of the effort is the user; they are attempting to increase user productivity in the enterprise. This paper describes their design and early implementation and discusses the planned future work.

  14. Analysing Enterprise Returns on Training.

    ERIC Educational Resources Information Center

    Moy, Janelle; McDonald, Rod

    Recent Australian and overseas studies on evaluation of enterprises' return on training investment (ROTI) were reviewed to identify key issues in encouraging increased evaluation of training benefits by enterprises and successful approaches that may inform future "enterprise-friendly" studies of ROTI. It was concluded that more practical,…

  15. Knowledge Management as Enterprise

    ERIC Educational Resources Information Center

    Kutay, Cat

    2007-01-01

    Indigenous people have been for a long time deprived of financial benefit from their knowledge. Campaigns around the stolen wages and the "Pay the Rent" campaign highlight this. As does the endemic poverty and economic disenfranchisement experienced by many Indigenous people and communities in Australia. Recent enterprises developed by Indigenous…

  16. Education and Enterprise.

    ERIC Educational Resources Information Center

    Emery, John S.

    1987-01-01

    In Australia, one effect of reduced government funding is to stimulate enterprise in higher education. This paper supports extending cooperation and joint ventures with industry and commerce and initiating new practices, such as exporting educational services or establishing a private education sector. A major drawback is the equity issue.…

  17. Framework for adaptive interoperability of manufacturing enterprises (FAIME): a case study

    NASA Astrophysics Data System (ADS)

    Sims, John E.; Chu, Bei Tseng B.; Long, Junshen; Matthews, Mike; Barnes, Johnny G.; Jones, Chris H.; Anderson, Rayne A.; Lambert, Russ; Drake, Doug C.; Hamilton, Mark A.; Connard, Mark

    1997-01-01

    In todays global economy, manufacturing industries require to connect disparate applications seamlessly. They require not only to exchange data and transactions, but present a single business process image to their employees in the office, headquarters, and on the plant floor. Also, it is imperative that small and medium size manufacturing companies deploy manufacturing execution systems applications in conjunction with modern enterprise resource programs for cycle time reduction and better quality. This paper presents the experiences and reflections on a project that created a tool set to assist the above be accomplished not only in a shorter cycle time, with a better predictable quality, and with an object oriented framework, but also a tool set that allows the manufacturer to still use legacy applications. This framework has the capability of plug-and- play so that future migrations and re-engineering of processes are more productive.

  18. DENSE MEDIUM CYCLONE OPTIMIZATON

    SciTech Connect

    Gerald H. Luttrell; Chris J. Barbee; Peter J. Bethell; Chris J. Wood

    2005-06-30

    Dense medium cyclones (DMCs) are known to be efficient, high-tonnage devices suitable for upgrading particles in the 50 to 0.5 mm size range. This versatile separator, which uses centrifugal forces to enhance the separation of fine particles that cannot be upgraded in static dense medium separators, can be found in most modern coal plants and in a variety of mineral plants treating iron ore, dolomite, diamonds, potash and lead-zinc ores. Due to the high tonnage, a small increase in DMC efficiency can have a large impact on plant profitability. Unfortunately, the knowledge base required to properly design and operate DMCs has been seriously eroded during the past several decades. In an attempt to correct this problem, a set of engineering tools have been developed to allow producers to improve the efficiency of their DMC circuits. These tools include (1) low-cost density tracers that can be used by plant operators to rapidly assess DMC performance, (2) mathematical process models that can be used to predict the influence of changes in operating and design variables on DMC performance, and (3) an expert advisor system that provides plant operators with a user-friendly interface for evaluating, optimizing and trouble-shooting DMC circuits. The field data required to develop these tools was collected by conducting detailed sampling and evaluation programs at several industrial plant sites. These data were used to demonstrate the technical, economic and environmental benefits that can be realized through the application of these engineering tools.

  19. Enterprise: an International Commercial Space Station Option

    NASA Astrophysics Data System (ADS)

    Lounge, John M.

    2002-01-01

    In December 1999, the U.S. aerospace company SPACEHAB, Inc., (SPACEHAB) and the Russian aerospace company Rocket and Space Corporation Energia (RSC-Energia), initiated a joint project to establish a commercial venture on the International Space Station (ISS). The approach of this venture is to use private capital to build and attach a commercial habitable module (the "Enterprise Module") to the Russian Segment of the ISS. The module will become an element of the Russian Segment; in return, exclusive rights to use this module for commercial business will be granted to its developers. The Enterprise Module has been designed as a multipurpose module that can provide research accommodation, stowage and crew support services. Recent NASA budget decisions have resulted in the cancellation of NASA's ISS habitation module, a significant delay in its new ISS crew return vehicle, and a mandate to stabilize the ISS program. These constraints limit the ISS crew size to three people and result in very little time available for ISS research support. Since research activity is the primary reason this Space Station is being built, the ISS program must find a way to support a robust international research program as soon as possible. The time is right for a commercial initiative incorporating the Enterprise Module, outfitted with life support systems, and commercially procured Soyuz vehicles to provide the capability to increase ISS crew size to six by the end of 2005.

  20. 2015 Enterprise Strategic Vision

    SciTech Connect

    2015-08-01

    This document aligns with the Department of Energy Strategic Plan for 2014-2018 and provides a framework for integrating our missions and direction for pursuing DOE’s strategic goals. The vision is a guide to advancing world-class science and engineering, supporting our people, modernizing our infrastructure, and developing a management culture that operates a safe and secure enterprise in an efficient manner.

  1. The Shuttle Enterprise

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The Shuttle Enterprise rolls out of the Palmdale manufacturing facilities with Star Trek television cast members. From left to right they are: Dr. James D. Fletcher, NASA Administrator, DeForest Kelley (Dr. 'Bones' McCoy), George Takei (Mr. Sulu), Nichelle Nichols (Lt. Uhura), Leonard Nimoy (the indefatigable Mr. Spock), Gene Rodenberry (The Great Bird of the Galaxy), and Walter Koenig (Ensign Pavel Checkov).

  2. Grand Challenges of Enterprise Integration

    SciTech Connect

    Brosey, W.D; Neal, R.E.; Marks, D.

    2001-04-01

    Enterprise Integration connects and combines people, processes, systems, and technologies to ensure that the right people and the right processes have the right information and the right resources at the right time. A consensus roadmap for Technologies for Enterprise Integration was created as part of an industry/government/academia partnership in the Integrated Manufacturing Technology Initiative (IMTI). Two of the grand challenges identified by the roadmapping effort will be addressed here--Customer Responsive Enterprises and Totally Connected Enterprises. Each of these challenges is briefly discussed as to the current state of industry and the future vision as developed in the roadmap.

  3. NASA Enterprise Visual Analysis

    NASA Technical Reports Server (NTRS)

    Lopez-Tellado, Maria; DiSanto, Brenda; Humeniuk, Robert; Bard, Richard, Jr.; Little, Mia; Edwards, Robert; Ma, Tien-Chi; Hollifield, Kenneith; White, Chuck

    2007-01-01

    NASA Enterprise Visual Analysis (NEVA) is a computer program undergoing development as a successor to Launch Services Analysis Tool (LSAT), formerly known as Payload Carrier Analysis Tool (PCAT). NEVA facilitates analyses of proposed configurations of payloads and packing fixtures (e.g. pallets) in a space shuttle payload bay for transport to the International Space Station. NEVA reduces the need to use physical models, mockups, and full-scale ground support equipment in performing such analyses. Using NEVA, one can take account of such diverse considerations as those of weight distribution, geometry, collision avoidance, power requirements, thermal loads, and mechanical loads.

  4. Effectuality of Cleaning Workers' Training and Cleaning Enterprises' Chemical Health Hazard Risk Profiling

    PubMed Central

    Suleiman, Abdulqadir M.; Svendsen, Kristin V.H.

    2015-01-01

    Background Goal-oriented communication of risk of hazards is necessary in order to reduce risk of workers' exposure to chemicals. Adequate training of workers and enterprise priority setting are essential elements. Cleaning enterprises have many challenges and the existing paradigms influence the risk levels of these enterprises. Methods Information on organization and enterprises' prioritization in training programs was gathered from cleaning enterprises. A measure of enterprises' conceptual level of importance of chemical health hazards and a model for working out the risk index (RI) indicating enterprises' conceptual risk level was established and used to categorize the enterprises. Results In 72.3% of cases, training takes place concurrently with task performances and in 67.4% experienced workers conduct the trainings. There is disparity between employers' opinion on competence level of the workers and reality. Lower conceptual level of importance was observed for cleaning enterprises of different sizes compared with regional safety delegates and occupational hygienists. Risk index values show no difference in risk level between small and large enterprises. Conclusion Training of cleaning workers lacks the prerequisite for suitability and effectiveness to counter risks of chemical health hazards. There is dereliction of duty by management in the sector resulting in a lack of competence among the cleaning workers. Instituting acceptable easily attainable safety competence level for cleaners will conduce to risk reduction, and enforcement of attainment of the competence level would be a positive step. PMID:26929848

  5. An introduction to enterprise modeling and simulation

    SciTech Connect

    Ostic, J.K.; Cannon, C.E.

    1996-09-01

    As part of an ongoing effort to continuously improve productivity, quality, and efficiency of both industry and Department of Energy enterprises, Los Alamos National Laboratory is investigating various manufacturing and business enterprise simulation methods. A number of enterprise simulation software models are being developed to enable engineering analysis of enterprise activities. In this document the authors define the scope of enterprise modeling and simulation efforts, and review recent work in enterprise simulation at Los Alamos National Laboratory as well as at other industrial, academic, and research institutions. References of enterprise modeling and simulation methods and a glossary of enterprise-related terms are provided.

  6. Virtual Enterprise: Transforming Entrepreneurship Education

    ERIC Educational Resources Information Center

    Borgese, Anthony

    2011-01-01

    Entrepreneurship education is ripe for utilizing experiential learning methods. Experiential methods are best learned when there is constant immersion into the subject matter. One such transformative learning methodology is Virtual Enterprise (VE). Virtual Enterprise is a multi-faceted, experiential learning methodology disseminated by the City…

  7. Enterprise Skills for the Economy

    ERIC Educational Resources Information Center

    Galloway, Laura; Anderson, Maggie; Brown, Wendy; Wilson, Laura

    2005-01-01

    Purpose ? In response to the emergence of an enterprise economy, government claims that building an enterprise culture is vital. Correspondingly, provision of entrepreneurship education in higher education has expanded. The paper aims to assess the potential of entrepreneurship education to develop skills, and of whether students perceive them as…

  8. Space Science Enterprise Strategy

    NASA Technical Reports Server (NTRS)

    2003-01-01

    The 2003 Space Science Enterprise Strategy represents the efforts of hundreds of scientists, staff, and educators, as well as collaboration with the other NASA Enterprises. It reveals the progress we have made, our plans for the near future, and our opportunity to support the Agency's Mission to "explore the universe and search for life." Space science has made spectacular advances in the recent past, from the first baby pictures of the universe to the discovery of water ice on Mars. Each new discovery impels us to ask new questions or regard old ones in new ways. How did the universe begin? How did life arise? Are we alone? These questions continue to inspire all of us to keep exploring and searching. And, as we get closer to answers, we will continue to share our findings with the science community, educators, and the public as broadly and as rapidly as possible. In this Strategy, you will find science objectives that define NASA's quest for discovery. You will also find the framework of programs, such as flight missions and ground-based research, that will enable us to achieve these objectives. This Strategy is founded on recommendations from the community, as well as lessons learned from past programs, and maps the stepping-stones to the future of space science.

  9. Enterprise Reference Library

    NASA Technical Reports Server (NTRS)

    Bickham, Grandin; Saile, Lynn; Havelka, Jacque; Fitts, Mary

    2011-01-01

    Introduction: Johnson Space Center (JSC) offers two extensive libraries that contain journals, research literature and electronic resources. Searching capabilities are available to those individuals residing onsite or through a librarian s search. Many individuals have rich collections of references, but no mechanisms to share reference libraries across researchers, projects, or directorates exist. Likewise, information regarding which references are provided to which individuals is not available, resulting in duplicate requests, redundant labor costs and associated copying fees. In addition, this tends to limit collaboration between colleagues and promotes the establishment of individual, unshared silos of information The Integrated Medical Model (IMM) team has utilized a centralized reference management tool during the development, test, and operational phases of this project. The Enterprise Reference Library project expands the capabilities developed for IMM to address the above issues and enhance collaboration across JSC. Method: After significant market analysis for a multi-user reference management tool, no available commercial tool was found to meet this need, so a software program was built around a commercial tool, Reference Manager 12 by The Thomson Corporation. A use case approach guided the requirements development phase. The premise of the design is that individuals use their own reference management software and export to SharePoint when their library is incorporated into the Enterprise Reference Library. This results in a searchable user-specific library application. An accompanying share folder will warehouse the electronic full-text articles, which allows the global user community to access full -text articles. Discussion: An enterprise reference library solution can provide a multidisciplinary collection of full text articles. This approach improves efficiency in obtaining and storing reference material while greatly reducing labor, purchasing and

  10. Calculating body frame size (image)

    MedlinePlus

    ... boned category. Determining frame size: To determine the body frame size, measure the wrist with a tape measure and use the following chart to determine whether the person is small, medium, or large boned. Women: Height under 5'2" Small = wrist size less ...

  11. Ground state structures, electronic and optical properties of medium-sized Nan + (n = 9, 15, 21, 26, 31, 36, 41, 50 and 59) clusters from ab initio genetic algorithm

    NASA Astrophysics Data System (ADS)

    Huang, Xiaoming; Sai, Linwei; Jiang, Xue; Zhao, Jijun

    2013-02-01

    Employing genetic algorithm incorporated with density functional theory calculations we determined the lowest-energy structures of cationic Na n + clusters ( n = 9, 15, 21, 26, 31, 36, 41, 50 and 59). We revealed a transition of growth pattern from "polyicosahedral" sequence to the Mackay icosahedral motif at around n = 40. Based on the ground-state structures the size dependent electronic properties of Na n + clusters including the binding energies, HOMO-LUMO gaps, electron density of states and photoabsorption spectra were discussed. As cluster size increases, the HOMO-LUMO gap of Na n + cluster gradually reduces and converges to metallic behavior of bulk crystal rapidly. The photoabsorption spectra of Na n + clusters from our calculations agree with experimental data rather well, confirming the reliability of our theoretical approaches.

  12. Enterprise data environment

    SciTech Connect

    Ricketts, B.

    1994-12-31

    This paper will report the progress of M3i`s evaluation of the communication challenges facing their client base and offer evidence that the puzzle is about to be solved. This paper will introduce the Enterprise Data Environment. In order to create a basis for Enterprise Data Environment (EDE), the fundamental data bases created and maintained by an average electrical utility must be discussed. The AM/FM industry began almost 30 years ago while the first {open_quotes}fast-pencil{close_quotes} system dates back to the 1960`s. The industry, which has undergone a series of transitions and name changes over the years, had its beginning as Computer Aided Drafting (CAD). As the name suggests, the technology drew lines and circles and was a tool for a draftsperson. One extension to CAD was Computer Assisted Mapping (CAD/CAM). This extension to CAD led to the creation of maps and was the technology renamed Automated Mapping (AM). One of the reasons for the name change was CAM also stood for Computer Aided Manufacturing. When data bases became more robust and popular (in the 1970`s), the natural extension to CAM (Computer Assisted Mapping) was to add a data base of the structures and facilities represented on the maps. Since data bases are managed, the technology was logically called Facilities Management (FM). Hence, Automated Mapping/Facilities Management or AM/FM. It is also called Geographic Information Systems or GIS. The main problem with AM/FM is that the data bases are created, maintained and updated by draftspersons from the AM perspective. Traditionally, these data bases have been as much as six months out-of-date. Because a utility relies on up-to-date data, it might be wondered how any work was achieved with AM/FM.

  13. Enterprise Middleware for Scientific Data

    SciTech Connect

    Thomson, Judi; Chappell, Alan R.; Almquist, Justin P.

    2003-02-27

    We describe an enterprise middleware system that integrates, from a user’s perspective, data located on disparate data storage devices without imposing additional requirements upon those storage mechanisms. The system provides advanced search capabilities by exploiting a repository of metadata that describes the integrated data. This search mechanism integrates information from a collection of XML metadata documents with diverse schema. Users construct queries using familiar search terms, and the enterprise system uses domain representations and vocabulary mappings to translate the user’s query, expanding the search to include other potentially relevant data. The enterprise architecture allows flexibility with respect to domain dependent processing of user data and metadata

  14. State Enterprise Zone Programs: Have They Worked?

    ERIC Educational Resources Information Center

    Peters, Alan H.; Fisher, Peter S.

    The effectiveness of state enterprise zone programs was examined by using a hypothetical-firm model called the Tax and Incentives Model-Enterprise Zones (TAIM-ez) model to analyze the value of enterprise zone incentives to businesses across the United States and especially in the 13 states that had substantial enterprise zone programs by 1990. The…

  15. Enterprise Training: This Changes Everything.

    ERIC Educational Resources Information Center

    Stamps, David

    1999-01-01

    In many companies, training management and knowledge management are merging. Enterprise-resource-planning software products promise seamless integration of all information flowing through a company. Training then becomes part of a process, not a course or event. (SK)

  16. Maturity model for enterprise interoperability

    NASA Astrophysics Data System (ADS)

    Guédria, Wided; Naudet, Yannick; Chen, David

    2015-01-01

    Historically, progress occurs when entities communicate, share information and together create something that no one individually could do alone. Moving beyond people to machines and systems, interoperability is becoming a key factor of success in all domains. In particular, interoperability has become a challenge for enterprises, to exploit market opportunities, to meet their own objectives of cooperation or simply to survive in a growing competitive world where the networked enterprise is becoming a standard. Within this context, many research works have been conducted over the past few years and enterprise interoperability has become an important area of research, ensuring the competitiveness and growth of European enterprises. Among others, enterprises have to control their interoperability strategy and enhance their ability to interoperate. This is the purpose of the interoperability assessment. Assessing interoperability maturity allows a company to know its strengths and weaknesses in terms of interoperability with its current and potential partners, and to prioritise actions for improvement. The objective of this paper is to define a maturity model for enterprise interoperability that takes into account existing maturity models while extending the coverage of the interoperability domain. The assessment methodology is also presented. Both are demonstrated with a real case study.

  17. 78 FR 48468 - Hewlett Packard Company, Hewlett Packard Enterprise Business Unit, EG HP Storage, Enterprise...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-08

    ... Employment and Training Administration Hewlett Packard Company, Hewlett Packard Enterprise Business Unit, EG HP Storage, Enterprise Storage, Servers and Networking Storage, APP Management, Research and... behalf of workers of Hewlett Packard Company, Hewlett Packard Enterprise Business Unit, EG HP...

  18. Synthetic laser medium

    DOEpatents

    Stokowski, Stanley E.

    1989-01-01

    A laser medium is particularly useful in high average power solid state lasers. The laser medium includes a chormium dopant and preferably neodymium ions as codopant, and is primarily a gadolinium scandium gallium garnet, or an analog thereof. Divalent cations inhibit spiral morphology as large boules from which the laser medium is derived are grown, and a source of ions convertible between a trivalent state and a tetravalent state at a low ionization energy are in the laser medium to reduce an absorption coefficient at about one micron wavelength otherwise caused by the divalent cations. These divalent cations and convertible ions are dispersed in the laser medium. Preferred convertible ions are provided from titanium or cerium sources.

  19. Synthetic laser medium

    DOEpatents

    Stokowski, S.E.

    1987-10-20

    A laser medium is particularly useful in high average power solid state lasers. The laser medium includes a chromium dopant and preferably neodymium ions as codopant, and is primarily a gadolinium scandium gallium garnet, or an analog thereof. Divalent cations inhibit spiral morphology as large boules from which the laser medium is derived are grown, and a source of ions convertible between a trivalent state and a tetravalent state at a low ionization energy are in the laser medium to reduce an absorption coefficient at about one micron wavelength otherwise caused by the divalent cations. These divalent cations and convertible ions are dispersed in the laser medium. Preferred convertible ions are provided from titanium or cerium sources.

  20. Building collaborative enterprise.

    PubMed

    Adler, Paul; Heckscher, Charles; Prusak, Laurence

    2011-01-01

    Can large companies be both innovative and efficient? Yes, argue Adler, of the University of Southern California; Heckscher, of Rutgers; and Prusak, an independent consultant. But they must develop new organizational capabilities that will create the atmosphere of trust that knowledge work requires--and the coordinating mechanisms to make it scalable. Specifically, such organizations must learn to: Define a shared purpose that guides what people at all levels of the organization are trying to achieve together; Cultivate an ethic of contribution in which the highest value is accorded to people who look beyond their specific roles and advance the common purpose; Develop scalable procedures for coordinating people's efforts so that process-management activities become truly interdependent; and Create an infrastructure in which individuals' spheres of influence overlap and collaboration is both valued and rewarded. These four goals may sound idealized, but the imperative to achieve them is practical, say the authors. Only the truly collaborative enterprises that can tap into everyone's ideas---in an organized way--will compete imaginatively, quickly, and cost-effectively enough to become the household names of this century. PMID:21800474

  1. Structures and relative stability of medium- and large-sized silicon clusters. VI. Fullerene cage motifs for low-lying clusters Si39, Si40, Si50, Si60, Si70, and Si80

    NASA Astrophysics Data System (ADS)

    Yoo, Soohaeng; Shao, N.; Zeng, X. C.

    2008-03-01

    We performed a constrained search, combined with density-functional theory optimization, of low-energy geometric structures of silicon clusters Si39, Si40, Si50, Si60, Si70, and Si80. We used fullerene cages as structural motifs to construct initial configurations of endohedral fullerene structures. For Si39, we examined six endohedral fullerene structures using all six homolog C34 fullerene isomers as cage motifs. We found that the Si39 constructed based on the C34(Cs:2) cage motif results in a new leading candidate for the lowest-energy structure whose energy is appreciably lower than that of the previously reported leading candidate obtained based on unbiased searches (combined with tight-binding optimization). The C34(Cs:2) cage motif also leads to a new candidate for the lowest-energy structure of Si40 whose energy is notably lower than that of the previously reported leading candidate with outer cage homolog to the C34(C1:1). Low-lying structures of larger silicon clusters Si50 and Si60 are also obtained on the basis of preconstructed endohedral fullerene structures. For Si50, Si60, and Si80, the obtained low-energy structures are all notably lower in energy than the lowest-energy silicon structures obtained based on an unbiased search with the empirical Stillinger-Weber potential of silicon. Additionally, we found that the binding energy per atom (or cohesive energy) increases typically >10meV with addition of every ten Si atoms. This result may be used as an empirical criterion (or the minimal requirement) to identify low-lying silicon clusters with size larger than Si50.

  2. Structures and relative stability of medium- and large-sized silicon clusters. VI. Fullerene cage motifs for low-lying clusters Si(39), Si(40), Si(50), Si(60), Si(70), and Si(80).

    PubMed

    Yoo, Soohaeng; Shao, N; Zeng, X C

    2008-03-14

    We performed a constrained search, combined with density-functional theory optimization, of low-energy geometric structures of silicon clusters Si(39), Si(40), Si(50), Si(60), Si(70), and Si(80). We used fullerene cages as structural motifs to construct initial configurations of endohedral fullerene structures. For Si(39), we examined six endohedral fullerene structures using all six homolog C(34) fullerene isomers as cage motifs. We found that the Si(39) constructed based on the C(34)(C(s):2) cage motif results in a new leading candidate for the lowest-energy structure whose energy is appreciably lower than that of the previously reported leading candidate obtained based on unbiased searches (combined with tight-binding optimization). The C(34)(C(s):2) cage motif also leads to a new candidate for the lowest-energy structure of Si(40) whose energy is notably lower than that of the previously reported leading candidate with outer cage homolog to the C(34)(C(1):1). Low-lying structures of larger silicon clusters Si(50) and Si(60) are also obtained on the basis of preconstructed endohedral fullerene structures. For Si(50), Si(60), and Si(80), the obtained low-energy structures are all notably lower in energy than the lowest-energy silicon structures obtained based on an unbiased search with the empirical Stillinger-Weber potential of silicon. Additionally, we found that the binding energy per atom (or cohesive energy) increases typically >10 meV with addition of every ten Si atoms. This result may be used as an empirical criterion (or the minimal requirement) to identify low-lying silicon clusters with size larger than Si(50).

  3. 7 CFR 51.2952 - Size specifications.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... diameter; except that for walnuts of the Eureka variety and type, such limiting dimension as to diameter shall be 76/64 inches; (d) Medium size. Medium size means walnuts of which at least 88 percent, by count... maximum diameter. Variety or Type Specifications...

  4. 7 CFR 51.2952 - Size specifications.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... round opening 77/64 inches in diameter; except that for walnuts of the Eureka variety and type, such limiting dimension as to diameter shall be 76/64 inches; (d) Medium size. Medium size means walnuts of... round hole of any specified maximum diameter. Variety or Type Specifications...

  5. Portion size

    MedlinePlus

    ... a woman's fist or a baseball One medium apple or orange is a tennis ball One-quarter ... you more satisfied. Some examples are having an apple with string cheese, whole-wheat crackers with peanut ...

  6. Control of enterprise interfaces for supply chain enterprise modeling

    SciTech Connect

    Interrante, L.D.; Macfarlane, J.F.

    1995-04-01

    There is a current trend for manufacturing enterprises in a supply chain of a particular industry to join forces in an attempt to promote efficiencies and improve competitive position. Such alliances occur in the context of specific legal and business agreements such that each enterprise retains a majority of its business and manufacturing information as private and shares other information with its trading partners. Shared information may include enterprise demand projections, capacities, finished goods inventories, and aggregate production schedules. Evidence of the trend toward information sharing includes the recent emphases on vendor-managed inventories, quick response, and Electronic Data Interchange (EDI) standards. The increased competition brought on by the global marketplace is driving industries to consider the advantages of trading partner agreements. Aggregate-level forecasts, supply-chain production smoothing, and aggregate-level inventory policies can reduce holding costs, record-keeping overhead, and lead time in product development. The goal of this research is to orchestrate information exchange among trading partners to allow for aggregate-level analysis to enhance supply chain efficiency. The notion of Enterprise Interface Control (EIC) is introduced as a means of accomplishing this end.

  7. 29 CFR 779.21 - Enterprise.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... leasing arrangements, but shall not include the related activities performed for such enterprise by an... 29 Labor 3 2010-07-01 2010-07-01 false Enterprise. 779.21 Section 779.21 Labor Regulations... OR SERVICES General Some Basic Definitions § 779.21 Enterprise. (a) Section 3(r) of the Act...

  8. Animal Enterprise Record Book. Agricultural Education.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Agricultural Curriculum Materials Service.

    This record book is intended for use by agricultural education students who have ownership arrangements in animal enterprise experience programs. A major purpose of this book is to aid in separating out or allocating the costs and returns to a specific enterprise. The financial, labor, and management aspects of each enterprise can then be studied…

  9. Technical Education in the Enterprise Zone.

    ERIC Educational Resources Information Center

    Friedman, Howard

    Support is growing for the concept of the enterprise zone. Congress has before it a bill, the Enterprise Zone Tax Act of 1982, that would provide incentives and create a climate in which entrepreneurs and business executives would locate businesses in areas of pervasive poverty and unemployment. A potential urban enterprise zone in New York City…

  10. Enterprise 3.0 in Engineering Education

    ERIC Educational Resources Information Center

    Ahrens, Andreas; Zascerinska, Jelena

    2011-01-01

    Enterprise 3.0 offers potential solutions for the quality, maintenance and sustainable development of services. The synergy between Enterprise 3.0 and engineering education advances the development of innovative products, processes and services in the European economy. Aim of the research is to analyze student engineers' use of Enterprise 3.0…

  11. Do "Some" Enterprise Zones Create Jobs?

    ERIC Educational Resources Information Center

    Kolko, Jed; Neumark, David

    2010-01-01

    We study how the employment effects of enterprise zones vary with their location, implementation, and administration, based on evidence from California. We use new establishment-level data and geographic mapping methods, coupled with a survey of enterprise zone administrators. Overall, the evidence indicates that enterprise zones do not increase…

  12. Evaluating Enterprise Education: Why Do It?

    ERIC Educational Resources Information Center

    Edwards, Louise-Jayne; Muir, Elizabeth J.

    2012-01-01

    Purpose: The purpose of this paper is to argue that evaluations of enterprise education need to develop beyond the economist viewpoint of business start-up and business growth and promote the notion that evaluations of enterprise education should encompass prime pedagogical objectives of enterprise education, enabling students to grow and develop…

  13. Ethics, Governance, Research and Enterprise

    ERIC Educational Resources Information Center

    Lategan, Laetus; Hooper, Peter

    2009-01-01

    The focus of this paper is to reflect on research ethics practices at universities and particularly on the additional considerations needed as "enterprise" becomes a key driver across the sector internationally. The outcome of the paper is to identify suitable guidelines for dealing with the management of research ethics in this changing…

  14. Virtual Enterprises and Vocational Training.

    ERIC Educational Resources Information Center

    Kreber, Stefan

    2001-01-01

    Characteristics of virtual enterprises (client oriented, temporary working organizations that dissolve after solving specific problems, extensive technological applications) can be applied to vocational training. Virtual learning centers can provide web-based training intraorganizationally and interorganizationally via intranets and extranets. (SK)

  15. Value Modeling for Enterprise Resilience

    SciTech Connect

    Henderson, Dale L.; Lancaster, Mary J.

    2015-10-20

    Abstract. The idea that resilience is a tangible, measureable, and desirable system attribute has grown rapidly over the last decade beyond is origins in explaining ecological, physiological, psychological, and social systems. Operational enterprise resilience requires two types of measurement. First, the system must monitor various operational conditions in order to respond to disruptions. These measurements are part of one or more observation, orientation, decision, and action (OODA) loops The OODA control processes that implement a resilience strategy use these measurements to provide robustness, rapid recovery and reconstitution. In order to assess the effectiveness of the resilience strategy, a different class of measurements is necessary. This second type consists of measurements about how well the OODA processes cover critical enterprise functions and the hazards to which the enterprise is exposed. They allow assessment of how well enterprise management processes anticipate, mitigate, and adapt to a changing environment and the degree to which the system is fault tolerant. This paper nominates a theoretical framework, in the form of definitions, a model, and a syntax, that accounts for this important distinction, and in so doing provides a mechanism for bridging resilience management process models and the many proposed cyber-defense metric enumerations.

  16. The Enterprise of the Future

    ERIC Educational Resources Information Center

    Murray, Dennis J.

    2009-01-01

    Last year, IBM Corporation conducted a study to determine what the successful enterprise of the future would look like. Its research was based on surveys of 1,130 CEOs, general managers, and senior public sector and business leaders from around the world. A few college and university presidents also were asked to participate. After 30 years as a…

  17. Academic Free Enterprise: A Proposal

    ERIC Educational Resources Information Center

    Gilbert, Arthur N.

    1973-01-01

    The free enterprise system can be adapted to university life. Any professor would be able to offer a course of his choosing on his own time and charge tuition for it. This system would parallel the regular course structure. (Author/PG)

  18. Designing normative open virtual enterprises

    NASA Astrophysics Data System (ADS)

    Garcia, Emilia; Giret, Adriana; Botti, Vicente

    2016-03-01

    There is an increasing interest on developing virtual enterprises in order to deal with the globalisation of the economy, the rapid growth of information technologies and the increase of competitiveness. In this paper we deal with the development of normative open virtual enterprises (NOVEs). They are systems with a global objective that are composed of a set of heterogeneous entities and enterprises that exchange services following a specific normative context. In order to analyse and design systems of this kind the multi-agent paradigm seems suitable because it offers a specific solution for supporting the social and contractual relationships between enterprises and for formalising their business processes. This paper presents how the Regulated Open Multi-agent systems (ROMAS) methodology, an agent-oriented software methodology, can be used to analyse and design NOVEs. ROMAS offers a complete development process that allows identifying and formalising of the structure of NOVEs, their normative context and the interactions among their members. The use of ROMAS is exemplified by means of a case study that represents an automotive supply chain.

  19. A Lens to the Enterprise.

    ERIC Educational Resources Information Center

    Zemsky, Robert, Ed.

    1999-01-01

    This essay is based on a series of roundtables convened through the Knight Collaborative National Medical Education Roundtable. It reports that the challenges and transformations experienced in recent years by community-based medical schools and clinical campuses offer a lens to the whole higher education enterprise, and asks the fundamental…

  20. Obstacles to Financing Minority Enterprises.

    ERIC Educational Resources Information Center

    District of Columbia Advisory Committee to the United States Commission on Civil Rights.

    In 1972, the District of Columbia Advisory Committee initiated an inquiry to determine the role that discrimination has played in limiting minority business enterprises in the Washington area. Meetings were held in which businessmen, representatives of technical assistance organizations, government officials, and bankers examined the question of…

  1. Monitoring the Surface Heat Island (shi) Effects of Industrial Enterprises

    NASA Astrophysics Data System (ADS)

    Şekertekin, A.; Kutoglu, Ş. H.; Kaya, S.; Marangoz, A. M.

    2016-06-01

    The aim of this study is to present the effects of industrial enterprises on Land Surface Temperature (LST) and to retrieve Surface Heat Island (SHI) maps of these regions. SHI is one of the types of Urban Heat Island (UHI) and as the urban areas grow in a city, UHI effect becomes bigger. The city centre of Zonguldak was chosen as study area and Landsat 5 satellite data were used as materials. Zonguldak has important industrial enterprises like thermal power plants and iron and steel plant. ERDEMIR is the biggest iron and steel plant in Turkey and it is one of the biggest ones in Europe, as well. There are three operating thermal power plants in the region namely CATES, ZETES1 and ZETES2. In order to investigate these industrial regions, Landsat 5 satellite data were processed using mono-window algorithm to retrieve LST and they were acquired on 11.09.1987, 18.09.2007 and 29.09.2011, respectively. The obtained results revealed that from 1987 to 2011, spatial and temporal variability in LST in industrial enterprises became higher than the surroundings. Besides, the sizes of SHIs in 2011 are bigger than the ones in 1987. For the countries and governments, having industrial enterprises is crucial for the development and it is also important to present the community better conditions in life. Thus, decision makers should consider mitigating the effects of these regions on LST.

  2. Ethanol production in small- to medium-size facilities

    NASA Astrophysics Data System (ADS)

    Hiler, E. A.; Coble, C. G.; Oneal, H. P.; Sweeten, J. M.; Reidenbach, V. G.; Schelling, G. T.; Lawhon, J. T.; Kay, R. D.; Lepori, W. A.; Aldred, W. H.

    1982-04-01

    In early 1980 system design criteria were developed for a small-scale ethanol production plant. The plant was eventually installed on November 1, 1980. It has a production capacity of 30 liters per hour; this can be increased easily (if desired) to 60 liters per hour with additional fermentation tanks. Sixty-six test runs were conducted to date in the alcohol production facility. Feedstocks evaluated in these tests include: corn (28 runs); grain sorghum (33 runs); grain sorghum grits (1 run); half corn/half sorghum (1 run); and sugarcane juice (3 runs). In addition, a small bench-scale fermentation and distillation system was used to evaluate sugarcane and sweet sorghum feedstocks prior to their evaluation in the larger unit. In each of these tests, evaluation of the following items was conducted: preprocessing requirements; operational problems; conversion efficiency (for example, liters of alcohol produced per kilogram of feedstock); energy balance and efficiency; nutritional recovery from stillage; solids separation by screw press; chemical characterization of stillage including liquid and solids fractions; wastewater requirements; and air pollution potential.

  3. An Educational Multimedia Presentation Framework for Medium-Sized Museums

    ERIC Educational Resources Information Center

    Styliaras, Georgios

    2009-01-01

    This paper presents a framework that supports an educational presentation of a museum on fixed information and pure educational stations through multimedia. Museum curators are offered a wizard-like procedure through which they can structure and populate the content to be presented, associate the content to predefined application types that…

  4. Class Size.

    ERIC Educational Resources Information Center

    Ellis, Thomas I.

    1985-01-01

    After a brief introduction identifying current issues and trends in research on class size, this brochure reviews five recent studies bearing on the relationship of class size to educational effectiveness. Part 1 is a review of two interrelated and highly controversial "meta-analyses" or statistical integrations of research findings on class size,…

  5. Hypermedia as medium

    NASA Technical Reports Server (NTRS)

    Dede, Christopher J.

    1990-01-01

    Claims and rebuttals that hypermedia (the associative, nonlinear interconnection of multimedia materials) is a fundamentally innovative means of thinking and communicating are described. This representational architecture has many advantages that make it a major advance over other media; however, it also has several intrinsic problems that severly limits its effectiveness as a medium. These advantages and limits in applications are discussed.

  6. Holographic recording medium

    NASA Technical Reports Server (NTRS)

    Gange, Robert Allen (Inventor)

    1977-01-01

    A holographic recording medium comprising a conductive substrate, a photoconductive layer and an electrically alterable layer of a linear, low molecular weight hydrocarbon polymer has improved fatigue resistance. An acrylic barrier layer can be interposed between the photoconductive and electrically alterable layers.

  7. Subcellular Size

    PubMed Central

    Marshall, Wallace F.

    2016-01-01

    All of the same conceptual questions about size in organisms apply equally at the level of single cells. What determines the size, not only of the whole cell, but of all its parts? What ensures that subcellular components are properly proportioned relative to the whole cell? How does alteration in organelle size affect biochemical function? Answering such fundamental questions requires us to understand how the size of individual organelles and other cellular structures is determined. Knowledge of organelle biogenesis and dynamics has advanced rapidly in recent years. Does this knowledge give us enough information to formulate reasonable models for organelle size control, or are we still missing something? PMID:25957302

  8. Liquid chromatographic extraction medium

    DOEpatents

    Horwitz, E. Philip; Dietz, Mark L.

    1994-01-01

    A method and apparatus for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column is described. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water.

  9. Liquid chromatographic extraction medium

    DOEpatents

    Horwitz, E.P.; Dietz, M.L.

    1994-09-13

    A method and apparatus are disclosed for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water. 1 fig.

  10. Portion Size Labeling and Intended Soft Drink Consumption: The Impact of Labeling Format and Size Portfolio

    ERIC Educational Resources Information Center

    Vermeer, Willemijn M.; Steenhuis, Ingrid H. M.; Leeuwis, Franca H.; Bos, Arjan E. R.; de Boer, Michiel; Seidell, Jacob C.

    2010-01-01

    Objective: To assess what portion size labeling "format" is most promising in helping consumers selecting appropriate soft drink sizes, and whether labeling impact depends on the size portfolio. Methods: An experimental study was conducted in fast-food restaurants in which 2 labeling formats (ie, reference portion size and small/medium/large…

  11. Size Matters

    ERIC Educational Resources Information Center

    Gehring, John

    2004-01-01

    This article describes the immense size of Unity Junior High School in Cicero, Illinois and the opinions of various people regarding its size. The school has more than 2,700 students, seventeen acres, eighty-eight faculty lounges, and ninety-six security cameras. Administrators hope the school--"Cicero's crown jewel," as the school district's Web…

  12. A frame of reference for extraterrestrial enterprises

    NASA Astrophysics Data System (ADS)

    Koelle, H. H.

    1993-09-01

    A model of a major "extraterrestrial enterprise" in cis-lunar space is presented. This primarily commercial enterprise comprises 10 individual companies and institutions respectively, two of which are owned by a group of governments. The 10 elements of this enterprise are organized in three groups: United Space Lines, Lunar Enterprises Group and Space Utilities Group. The functions and relations between these entities are described. The financing of such an evolutionary development is considered the most difficult problem and is discussed in some detail. An illustrative model for financing the acquisition and operation of this commercial space enterprise by the participating partners is presented. This model is complemented by a context diagram and a master schedule to illustrate a typical development of this enterprise vs time. It is anticipated that early next century is the time where the resources for developing the resources of the solar system with participation of commercial partners may become available.

  13. 7 CFR 51.2836 - Size classifications.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...-Granex-Grano and Creole Types) Size Classifications § 51.2836 Size classifications. The size of onions... 13/4 44.5 3 76.2 Medium 2 50.8 31/4 82.6 Large or Jumbo 3 76.2 (2) Colossal 33/4 95.3 (2) 1...

  14. The Local Interstellar Medium

    NASA Astrophysics Data System (ADS)

    Ferlet, Roger

    Substantial progress in the field of the Local Interstellar Medium has been largely due to recent launches of space missions, mostly in the UV and X-ray domains, but also to ground-based observations, mainly in high resolution spectroscopy. However, a clear gap seems to remain between the wealth of new data and the theoretical understanding. This paper gives an overview of some observational aspects, with no attempt of completeness or doing justice to all the people involved in the field. As progress rarely evolves in straight paths, we can expect that our present picture of the solar system surroundings is not definitive.

  15. Aerosol mobility size spectrometer

    DOEpatents

    Wang, Jian; Kulkarni, Pramod

    2007-11-20

    A device for measuring aerosol size distribution within a sample containing aerosol particles. The device generally includes a spectrometer housing defining an interior chamber and a camera for recording aerosol size streams exiting the chamber. The housing includes an inlet for introducing a flow medium into the chamber in a flow direction, an aerosol injection port adjacent the inlet for introducing a charged aerosol sample into the chamber, a separation section for applying an electric field to the aerosol sample across the flow direction and an outlet opposite the inlet. In the separation section, the aerosol sample becomes entrained in the flow medium and the aerosol particles within the aerosol sample are separated by size into a plurality of aerosol flow streams under the influence of the electric field. The camera is disposed adjacent the housing outlet for optically detecting a relative position of at least one aerosol flow stream exiting the outlet and for optically detecting the number of aerosol particles within the at least one aerosol flow stream.

  16. Haise Commands First Enterprise Test Flights

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The first crew members for the Space Shuttle Approach and Landing Tests (ALT) are photographed at the Rockwell International Space Division's Orbiter Assembly Facility at Palmdale, California. The Shuttle Enterprise is Commanded by former Apollo 13 Lunar Module pilot, Fred Haise (left) with C. Gordon Fullerton as pilot. The Shuttle Orbiter Enterprise was named after the fictional Starship Enterprise from the popular 1960's television series, Star Trek.

  17. Enterprise Risk Management in the Oil and Gas Industry: An Analysis of Selected Fortune 500 Oil and Gas Companies' Reaction in 2009 and 2010

    ERIC Educational Resources Information Center

    Rogers, Violet C.; Ethridge, Jack R.

    2016-01-01

    In 2009, four of the top ten Fortune 500 companies were classified within the oil and gas industry. Organizations of this size typically have an advanced Enterprise Risk Management system in place to mitigate risk and to achieve their corporations' objectives. The companies and the article utilize the Enterprise Risk Management Integrated…

  18. The Impact of Enterprise Education on Attitudes to Enterprise in Young People: An Evaluation Study

    ERIC Educational Resources Information Center

    Athayde, Rosemary

    2012-01-01

    Purpose: The purpose of the paper is to present evidence on the impact of enterprise education on young people still at school in London, UK. The study was designed to measure the effect of participation in a Young Enterprise (YE) Company Program on young people's attitudes toward starting a business, and on their enterprise potential.…

  19. The turbulent interstellar medium and pressure-bounded molecular clouds

    NASA Technical Reports Server (NTRS)

    Maloney, Philip

    1988-01-01

    The existence of turbulence throughout the interstellar medium suggests that an appropriate value for the average pressure may be P/K larger than about 10,000. Negative-index polytropic models of interstellar clouds in equilibrium with an external medium at these pressures are predicted to have sizes, line widths, masses, and size-line width and size-density relations in good agreement with those observed and inferred for dark clouds. Thus these observed features of interstellar clouds do not require that they be completely self-gravitating or 'virialized' in the commonly used sense.

  20. Slow convergence to effective medium in finite discrete metamaterials

    NASA Astrophysics Data System (ADS)

    Lapine, M.; McPhedran, R. C.; Poulton, C. G.

    2016-06-01

    It is known that metamaterial properties may differ significantly from the predictions of effective-medium theory. In many cases this is due to the finite size and discrete structure, which cannot be neglected in practical samples with a relatively small amount of elements. We analyze the response of finite discrete metamaterial objects of a spherical shape and demonstrate the role of boundary effects in these structures, pointing out an interplay between the size of the structure and the dissipation. We conclude that the discrepancy between the actual resonance frequency of a sphere and the effective-medium prediction is inversely proportional to the size of the sphere.

  1. 'Big Data' Collaboration: Exploring, Recording and Sharing Enterprise Knowledge

    SciTech Connect

    Sukumar, Sreenivas R; Ferrell, Regina Kay

    2013-01-01

    As data sources and data size proliferate, knowledge discovery from "Big Data" is starting to pose several challenges. In this paper, we address a specific challenge in the practice of enterprise knowledge management while extracting actionable nuggets from diverse data sources of seemingly-related information. In particular, we address the challenge of archiving knowledge gained through collaboration, dissemination and visualization as part of the data analysis, inference and decision-making lifecycle. We motivate the implementation of an enterprise data-discovery and knowledge recorder tool, called SEEKER based on real world case-study. We demonstrate SEEKER capturing schema and data-element relationships, tracking the data elements of value based on the queries and the analytical artifacts that are being created by analysts as they use the data. We show how the tool serves as digital record of institutional domain knowledge and a documentation for the evolution of data elements, queries and schemas over time. As a knowledge management service, a tool like SEEKER saves enterprise resources and time by avoiding analytic silos, expediting the process of multi-source data integration and intelligently documenting discoveries from fellow analysts.

  2. Unique Challenges to (Federal) Enterprise Streaming

    NASA Technical Reports Server (NTRS)

    Walls, Bryan

    2006-01-01

    Enterprise streaming has different parameters than consumer Streaming. The government enterprise has some differences on top of that. I'd like to highlight some issues shared by the Federal government as a whole, with a closer look at streaming within NASA. Then we'll look at NASA's strategy for streaming.

  3. Enterprise Education: For All, or Just Some?

    ERIC Educational Resources Information Center

    Jones, Colin; Matlay, Harry; Maritz, Alex

    2012-01-01

    Purpose: The purpose of this paper is to provocatively enter four imagined worlds of enterprise education with the express aim of contemplating an emerging future. The authors do so not to expressly determine what positioning is most appropriate for enterprise/entrepreneurship education, but rather to consider the issues associated with each of…

  4. Enterprise Standard Industrial Classification Manual. 1974.

    ERIC Educational Resources Information Center

    Executive Office of the President, Washington, DC. Statistical Policy Div.

    This classification is presented to provide a standard for use with statistics about enterprises (i.e., companies, rather than their individual establishments) by kind of economic activity. The enterprise unit consists of all establishments under common direct or indirect ownership. It is defined to include all entities, including subsidiaries,…

  5. Enterprise Education in Geography at Lancaster.

    ERIC Educational Resources Information Center

    Clark, Gordon

    1991-01-01

    Describes development of an enterprise education program at the University of Lancaster. Includes the development of business/enterprise awareness, acquisition of transferable personal skills useful in subsequent employment, and completion of a project in a working environment. Concludes that success of the program will depend on how it is…

  6. Assessing Enterprise Capability: Guidance for Schools

    ERIC Educational Resources Information Center

    National Foundation for Educational Research, 2007

    2007-01-01

    This document offers guidance to schools on how assessment can support enterprise education. It presents the interim findings from research carried out by the National Foundation for Educational Research (NFER) for the Department for Education and Skills (DfES) in secondary schools in England. Enterprise capability is the key outcome of enterprise…

  7. Embedding Enterprise in Science and Engineering Departments

    ERIC Educational Resources Information Center

    Handscombe, Robert D.; Rodriguez-Falcon, Elena; Patterson, Eann A.

    2008-01-01

    Purpose: This paper aims to focus on the attempts to implement the challenges of teaching enterprise to science and engineering students by the embedding approach chosen by the White Rose Centre for Enterprise (WRCE), one of the centres formed under the Science Engineering Challenge in the UK. Design/methodology/approach: WRCE's objective was to…

  8. 29 CFR 779.21 - Enterprise.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false Enterprise. 779.21 Section 779.21 Labor Regulations... OR SERVICES General Some Basic Definitions § 779.21 Enterprise. (a) Section 3(r) of the Act provides, in pertinent part that “enterprise” as used in the Act: means the related activities...

  9. Defining and Assessing Enterprise Capability in Schools

    ERIC Educational Resources Information Center

    Davies, Peter; Hughes, Amanda

    2015-01-01

    This paper describes the development of an instrument for assessing enterprise capability in schools. The approach to assessing enterprise capability builds on previous work by including three dimensions: self-efficacy, aspirations and knowledge and awareness. We find significant but weak associations between these three constructs suggesting that…

  10. 29 CFR 779.21 - Enterprise.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 3 2014-07-01 2014-07-01 false Enterprise. 779.21 Section 779.21 Labor Regulations... OR SERVICES General Some Basic Definitions § 779.21 Enterprise. (a) Section 3(r) of the Act provides, in pertinent part that “enterprise” as used in the Act: means the related activities...

  11. 29 CFR 779.21 - Enterprise.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 3 2012-07-01 2012-07-01 false Enterprise. 779.21 Section 779.21 Labor Regulations... OR SERVICES General Some Basic Definitions § 779.21 Enterprise. (a) Section 3(r) of the Act provides, in pertinent part that “enterprise” as used in the Act: means the related activities...

  12. The Enterprise Campus at Midlands Technical College

    ERIC Educational Resources Information Center

    Rhames, Ronald L.; Ledbetter, J. Tom, Jr.

    2008-01-01

    The Commission established the Midlands Technical College (MTC) Enterprise Campus through special legislation. The Enterprise Campus provides for partnerships with private developers using private resources to create a unique business environment. Participants learn about the legislative process, the need for public/private partnerships, and what…

  13. 29 CFR 779.21 - Enterprise.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 3 2013-07-01 2013-07-01 false Enterprise. 779.21 Section 779.21 Labor Regulations... OR SERVICES General Some Basic Definitions § 779.21 Enterprise. (a) Section 3(r) of the Act provides, in pertinent part that “enterprise” as used in the Act: means the related activities...

  14. New Management Practices and Enterprise Training.

    ERIC Educational Resources Information Center

    Smith, Andrew; Oczkowski, Eddie; Noble, Charles; Macklin, Robert

    The changing nature of the demand for training in Australian enterprises adopting new management practices and the implications of those changes for training providers were examined. More than 3,400 private sector enterprises were surveyed by mail, after which follow-up telephone interviews were conducted with 80 human resource practitioners from…

  15. Stakeholder Analysis To Shape the Enterprise

    NASA Astrophysics Data System (ADS)

    McCaughin, Keith; Derosa, Joseph

    An enterprise is a complex adaptive social system that should maximize stakeholder, not shareholder, value — value to employees, customers, shareholders and others. We expand upon Russell Ackoff s direction to distribute value among stakeholders, to propose a schema of rules that guide the interactions among autonomous agents in the transactional environment of an enterprise. We define an enterprise as an organization and its transactional environment interacting with and adapting to each other. Enterprise behavior can only be understood in the context of this transactional environment where everything depends on everything else and interactions cannot be controlled, but can be influenced if they are guided by an understanding of the internal rules of the autonomous agents. The schema has four complementary rules (control, autonomy, return and value) derived from the work of Russell Ackoff and Michael Porter. The basic rules are applied in combination to eight stakeholder types derived from Richard Hopeman and Raymond McLeod (Leaders, Competitors, Customers, Public, Workers, Collaborators, Suppliers and Regulators). An enterprise can use this schema and rules in a process of stakeholder analysis to develop and continually refine strategies to encourage behaviors that benefit the enterprise and discourage behaviors that harm the enterprise. These strategies are implemented in a relationship management program in support of enterprise strategic management to consciously and explicitly shape the environment to reduce risks and increase opportunities for success.

  16. Exploring Size.

    ERIC Educational Resources Information Center

    Brand, Judith, Ed.

    1995-01-01

    "Exploring" is a magazine of science, art, and human perception that communicates ideas museum exhibits cannot demonstrate easily by using experiments and activities for the classroom. This issue concentrates on size, examining it from a variety of viewpoints. The focus allows students to investigate and discuss interconnections among apparently…

  17. Skills Acquisition in Plantain Flour Processing Enterprises: A Validation of Training Modules for Senior Secondary Schools

    ERIC Educational Resources Information Center

    Udofia, Nsikak-Abasi; Nlebem, Bernard S.

    2013-01-01

    This study was to validate training modules that can help provide requisite skills for Senior Secondary school students in plantain flour processing enterprises for self-employment and to enable them pass their examination. The study covered Rivers State. Purposive sampling technique was used to select a sample size of 205. Two sets of structured…

  18. Random lasing in a nanocomposite medium

    SciTech Connect

    Smetanin, Sergei N; Basiev, Tasoltan T

    2013-01-31

    The characteristics of a random laser based on a nanocomposite medium consisting of a transparent dielectric and scattering doped nanocrystals are calculated. It is proposed to use ytterbium laser media with a high concentration of active ions as nanocrystals and to use gases, liquids, or solid dielectrics with a refractive index lower than that of nanocrystals as dielectric matrices for nanocrystals. Based on the concept of nonresonant distributed feedback due to the Rayleigh scattering, an expression is obtained for the minimum length of a nanocomposite laser medium at which the random lasing threshold is overcome. Expressions are found for the critical (maximum) and the optimal size of nanocrystals, as well as for the optimal relative refractive index of nanocomposites that corresponds not only to the maximum gain but also to the minimum of the medium threshold length at the optimal size of nanocrystals. It is shown that the optimal relative refractive index of a nanocomposite increases with increasing pump level, but is independent of the other nanocomposite parameters. (nanocomposites)

  19. Shuttle Enterprise Being Worked on in Hangar

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The Space Shuttle Enterprise being worked on in the weight & balance hangar. The Enterprise, the first orbiter built, was not spaceflight rated and was used in 1977 to verify the landing, approach, and glide characteristics of the orbiters in the Approach and Landing Tests (ALT) at Edwards Air Force Base, California. It was also used for engineering fit-checks at the shuttle launch facilities. Following approach and landing tests in 1977 and its use as an engineering vehicle, Enterprise was donated to the National Air and Space Museum in Washington, D.C. Space Shuttles are the main element of America's Space Transportation System and are used for space research and other space applications. The shuttles are the first vehicles capable of being launched into space and returning to Earth on a routine basis. Space Shuttles are used as orbiting laboratories in which scientists and mission specialists conduct a wide variety of scientific experiments. Crews aboard shuttles place satellites in orbit, rendezvous with satellites to carry out repair missions and return them to space, and retrieve satellites and return them to Earth for refurbishment and reuse. Space Shuttles are true aerospace vehicles. They leave Earth and its atmosphere under rocket power provided by three liquid-propellant main engines with two solid-propellant boosters attached plus an external liquid-fuel tank. After their orbital missions, they streak back through the atmosphere and land like airplanes. The returning shuttles, however, land like gliders, without power and on runways. Other rockets can place heavy payloads into orbit, but, they can only be used once. Space Shuttles are designed to be continually reused. When Space Shuttles are used to transport complete scientific laboratories into space, the laboratories remain inside the payload bay throughout the mission. They are then removed after the Space Shuttle returns to Earth and can be reused on future flights. Some of these orbital

  20. Enterprise resource planning for hospitals.

    PubMed

    van Merode, Godefridus G; Groothuis, Siebren; Hasman, Arie

    2004-06-30

    Integrated hospitals need a central planning and control system to plan patients' processes and the required capacity. Given the changes in healthcare one can ask the question what type of information systems can best support these healthcare delivery organizations. We focus in this review on the potential of enterprise resource planning (ERP) systems for healthcare delivery organizations. First ERP systems are explained. An overview is then presented of the characteristics of the planning process in hospital environments. Problems with ERP that are due to the special characteristics of healthcare are presented. The situations in which ERP can or cannot be used are discussed. It is suggested to divide hospitals in a part that is concerned only with deterministic processes and a part that is concerned with non-deterministic processes. ERP can be very useful for planning and controlling the deterministic processes. PMID:15171978

  1. Interstellar medium simulations

    NASA Astrophysics Data System (ADS)

    Breitschwerdt, D.; de Avillez, M. A.; Feige, J.; Dettbarn, C.

    2012-06-01

    In this review we critically assess numerical simulations of the interstellar medium (ISM), and argue that 3D high resolution calculations are the most promising method to determine the structure of the interstellar gas and follow its evolution well into the nonlinear regime. Based on a Riemann solver adaptive mesh refinement code, we present a model, which fulfills the basic requirements of running it sufficiently long in order to erase memory effects of the initial conditions, set up a disk-halo fountain flow cycle, for converging solutions with increasing mesh refinement. We obtain the following results: (i) in a supernova driven ISM, high Reynolds number turbulence generates structures on all scales, (ii) the volume filling factor of the hot gas is substantially reduced due to the fountain flow, (iii) gas clouds are transient shock compressed layers, (iv) more than half of the gas mass resides in thermally unstable regimes, (v) O VI is distributed in patchy mixing layers, with the derived column densities being in agreement with FUSE and Copernicus observations, (vi) the electron density distribution up to distances of 8 kpc in the disk is consistent with pulsar dispersion measure observations, provided that the electron and ionization structure are not in equilibrium, (vii) the interstellar cooling function depends both on space and time (and not only on temperature and metallicity), (viii) the Local Bubble has been produced by 14-20 supernovae about 14 Myr ago, exploding in a moving group on its path through the local ISM, (ix) the nearest supernova explosion to Earth occurred 2.2 {×} 106 yr ago at a distance of {˜} 85 pc, in agreement with measurements of the radionuclide 60Fe found in the ferromanganese crust on the ocean floor.

  2. Enterprise storage report for the 1990's

    NASA Technical Reports Server (NTRS)

    Moore, Fred

    1992-01-01

    Data processing has become an increasingly vital function, if not the most vital function, in most businesses today. No longer only a mainframe domain, the data processing enterprise also includes the midrange and workstation platforms, either local or remote. This expanded view of the enterprise has encouraged more and more businesses to take a strategic, long-range view of information management rather than the short-term tactical approaches of the past. This paper will highlight some of the significant aspects of data storage in the enterprise for the 1990's.

  3. Leading a Recovery-oriented Social Enterprise.

    PubMed

    Raeburn, Toby; Hungerford, Catherine; Sayers, Jan; Escott, Phil; Lopez, Violeta; Cleary, Michelle

    2015-05-01

    Recovery-oriented mental health services promote the principles of recovery, such as hope and optimism, and are characterized by a personalized approach to developing consumer self-determination. Nurse leaders are increasingly developing such services as social enterprises, but there is limited research on the leadership of these programs. Leading a recovery-oriented mental health nurse social enterprise requires visionary leadership, collaboration with consumers and local health providers, financial viability, and commitment to recovery-focused practice. This article describes the framework of an Australian mental health nursing social enterprise, including the service attributes and leadership lessons that have been learned from developing program sustainability. PMID:26090553

  4. Enterprise Networking Web Sites and Organizational Communication in Australia

    ERIC Educational Resources Information Center

    Zhang, Allee M.; Zhu, Yunxia; Hildebrandt, Herbert

    2009-01-01

    This article aims to report initial findings about networking in organizational settings in Australia through the use of enterprise social software. According to Gray and Honick (2008), enterprise social software (also known as Enterprise 2.0) is a term describing social software used in businesses and enterprises. It includes such tools as…

  5. 13 CFR 107.710 - Requirement to finance smaller enterprises.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... enterprises. 107.710 Section 107.710 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL... Small Business for Sbic Financing § 107.710 Requirement to finance smaller enterprises. Your Portfolio must include Financings to Smaller Enterprises. (a) Definition of Smaller Enterprise. A...

  6. 25 CFR 286.7 - Location of enterprise.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Location of enterprise. 286.7 Section 286.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.7 Location of enterprise. To be eligible for a grant an economic enterprise must be...

  7. 25 CFR 286.4 - Eligible economic enterprises.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Eligible economic enterprises. 286.4 Section 286.4 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.4 Eligible economic enterprises. An economic enterprise as defined in § 286.1(k)...

  8. 77 FR 56837 - Enterprise Intrastate LLC; Notice of Filing

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-14

    ... Energy Regulatory Commission Enterprise Intrastate LLC; Notice of Filing Take notice that on September 6, 2012, Enterprise Intrastate LLC (Enterprise Intrastate) filed to revise its Statement of Operating Conditions (SOC) for transportation services. Enterprise Intrastate is revising its SOC to replace...

  9. 25 CFR 286.7 - Location of enterprise.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Location of enterprise. 286.7 Section 286.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.7 Location of enterprise. To be eligible for a grant an economic enterprise must be...

  10. 25 CFR 286.4 - Eligible economic enterprises.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Eligible economic enterprises. 286.4 Section 286.4 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.4 Eligible economic enterprises. An economic enterprise as defined in § 286.1(k)...

  11. 12 CFR 1252.1 - Enterprise portfolio holding criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Enterprise portfolio holding criteria. 1252.1 Section 1252.1 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES PORTFOLIO HOLDINGS § 1252.1 Enterprise portfolio holding criteria. The Enterprises are required to comply with the portfolio...

  12. 12 CFR 1252.1 - Enterprise portfolio holding criteria.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 9 2012-01-01 2012-01-01 false Enterprise portfolio holding criteria. 1252.1 Section 1252.1 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES PORTFOLIO HOLDINGS § 1252.1 Enterprise portfolio holding criteria. The Enterprises are required to comply with the portfolio...

  13. 25 CFR 286.7 - Location of enterprise.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Location of enterprise. 286.7 Section 286.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.7 Location of enterprise. To be eligible for a grant an economic enterprise must be...

  14. 12 CFR 1249.11 - Maintenance of Enterprise Securities.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 10 2014-01-01 2014-01-01 false Maintenance of Enterprise Securities. 1249.11 Section 1249.11 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES BOOK-ENTRY PROCEDURES § 1249.11 Maintenance of Enterprise Securities. An Enterprise Security may be maintained in the form of...

  15. 12 CFR 1249.11 - Maintenance of Enterprise Securities.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 9 2013-01-01 2013-01-01 false Maintenance of Enterprise Securities. 1249.11 Section 1249.11 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES BOOK-ENTRY PROCEDURES § 1249.11 Maintenance of Enterprise Securities. An Enterprise Security may be maintained in the form of...

  16. 13 CFR 107.710 - Requirement to finance smaller enterprises.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... enterprises. 107.710 Section 107.710 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL... Small Business for Sbic Financing § 107.710 Requirement to finance smaller enterprises. Your Portfolio must include Financings to Smaller Enterprises. (a) Definition of Smaller Enterprise. A...

  17. 12 CFR 1252.1 - Enterprise portfolio holding criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Enterprise portfolio holding criteria. 1252.1 Section 1252.1 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES PORTFOLIO HOLDINGS § 1252.1 Enterprise portfolio holding criteria. The Enterprises are required to comply with the portfolio...

  18. 25 CFR 286.4 - Eligible economic enterprises.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Eligible economic enterprises. 286.4 Section 286.4 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.4 Eligible economic enterprises. An economic enterprise as defined in § 286.1(k) is...

  19. 12 CFR 1249.11 - Maintenance of Enterprise Securities.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 12 Banks and Banking 9 2012-01-01 2012-01-01 false Maintenance of Enterprise Securities. 1249.11 Section 1249.11 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES BOOK-ENTRY PROCEDURES § 1249.11 Maintenance of Enterprise Securities. An Enterprise Security may be maintained in the form of...

  20. 12 CFR 1252.1 - Enterprise portfolio holding criteria.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 12 Banks and Banking 10 2014-01-01 2014-01-01 false Enterprise portfolio holding criteria. 1252.1 Section 1252.1 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES PORTFOLIO HOLDINGS § 1252.1 Enterprise portfolio holding criteria. The Enterprises are required to comply with the portfolio...

  1. 12 CFR 1249.11 - Maintenance of Enterprise Securities.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Maintenance of Enterprise Securities. 1249.11 Section 1249.11 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES BOOK-ENTRY PROCEDURES § 1249.11 Maintenance of Enterprise Securities. An Enterprise Security may be maintained in the form of...

  2. 13 CFR 107.710 - Requirement to finance smaller enterprises.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... enterprises. 107.710 Section 107.710 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL... Small Business for Sbic Financing § 107.710 Requirement to finance smaller enterprises. Your Portfolio must include Financings to Smaller Enterprises. (a) Definition of Smaller Enterprise. A...

  3. 12 CFR 1252.1 - Enterprise portfolio holding criteria.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 12 Banks and Banking 9 2013-01-01 2013-01-01 false Enterprise portfolio holding criteria. 1252.1 Section 1252.1 Banks and Banking FEDERAL HOUSING FINANCE AGENCY ENTERPRISES PORTFOLIO HOLDINGS § 1252.1 Enterprise portfolio holding criteria. The Enterprises are required to comply with the portfolio...

  4. 25 CFR 286.7 - Location of enterprise.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Location of enterprise. 286.7 Section 286.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.7 Location of enterprise. To be eligible for a grant an economic enterprise must be...

  5. 25 CFR 286.4 - Eligible economic enterprises.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Eligible economic enterprises. 286.4 Section 286.4 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.4 Eligible economic enterprises. An economic enterprise as defined in § 286.1(k)...

  6. 25 CFR 286.4 - Eligible economic enterprises.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Eligible economic enterprises. 286.4 Section 286.4 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.4 Eligible economic enterprises. An economic enterprise as defined in § 286.1(k)...

  7. 25 CFR 286.7 - Location of enterprise.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Location of enterprise. 286.7 Section 286.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS DEVELOPMENT PROGRAM § 286.7 Location of enterprise. To be eligible for a grant an economic enterprise must be...

  8. Are Public Enterprises Inefficient?: Viewpoints of Western Scholars

    ERIC Educational Resources Information Center

    Fuqian, Fang

    2006-01-01

    People who advocate the privatization of public enterprises generally maintain that these enterprises, compared with private enterprises, have the following shortcomings: (1) public enterprises do not produce in response to consumer needs; (2) they use too much capital on inefficient production; (3) production often experiences breakdowns and…

  9. Selecting Cooperative Enterprise in Dynamic Enterprise Alliance Based on Fuzzy Comprehensive Evaluation

    NASA Astrophysics Data System (ADS)

    Li, Yan; Zhang, Guoxing; Liu, Jun

    Dynamic enterprise alliance is a complex organization system. It has the virtual enterprise establishment, virtual operation and virtual management functions. The suitable cooperative partner is the necessary condition to ensure the efficient functioning of the dynamic enterprises alliance. It is the key technology of selecting the suitable partner reasonably and forming the dynamic enterprises alliance to realize the network manufacturing. In this paper, one reasonable model of fuzzy comprehensive evaluation on the cooperative partner of the dynamic enterprises alliance is established, using the fuzzy multi-grade comprehensive evaluation method based on the theories of fuzzy logic. It can offer a scientific method to select the optimum cooperative partner for the dynamic enterprises alliance, and improve the comparison level for alternatives.

  10. New medium licensed for campylobacter

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A medium, “Campy-Cefex”, has been licensed by the ARS Office of Technology Transfer with Becton Dickinson (No. 1412-002) and Neogen (No. 1412-001) based on patent No. 5,891,709, “Campy-Cefex Selective and Differential Medium for Campylobacter” by Dr. Norman Stern of the Poultry Microbiological Safet...

  11. Computing & Interpreting Effect Sizes in Educational Research

    ERIC Educational Resources Information Center

    Thompson, Bruce

    2009-01-01

    The present article provides a primer on using effect sizes in research. A small heuristic data set is used in order to make the discussion concrete. Additionally, various admonitions for best practice in reporting and interpreting effect sizes are presented. Among these is the admonition to not use Cohen's benchmarks for "small," "medium," and…

  12. 25 CFR 247.19 - Can a site be used for commercial enterprises other than fishing enterprises by the tribes?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 1 2013-04-01 2013-04-01 false Can a site be used for commercial enterprises other than fishing enterprises by the tribes? 247.19 Section 247.19 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... be used for commercial enterprises other than fishing enterprises by the tribes? (a) You may...

  13. 25 CFR 247.19 - Can a site be used for commercial enterprises other than fishing enterprises by the tribes?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 1 2014-04-01 2014-04-01 false Can a site be used for commercial enterprises other than fishing enterprises by the tribes? 247.19 Section 247.19 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... be used for commercial enterprises other than fishing enterprises by the tribes? (a) You may...

  14. 25 CFR 247.19 - Can a site be used for commercial enterprises other than fishing enterprises by the tribes?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Can a site be used for commercial enterprises other than fishing enterprises by the tribes? 247.19 Section 247.19 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... be used for commercial enterprises other than fishing enterprises by the tribes? (a) You may...

  15. 25 CFR 247.19 - Can a site be used for commercial enterprises other than fishing enterprises by the tribes?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 1 2012-04-01 2011-04-01 true Can a site be used for commercial enterprises other than fishing enterprises by the tribes? 247.19 Section 247.19 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... be used for commercial enterprises other than fishing enterprises by the tribes? (a) You may...

  16. 25 CFR 247.19 - Can a site be used for commercial enterprises other than fishing enterprises by the tribes?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 1 2011-04-01 2011-04-01 false Can a site be used for commercial enterprises other than fishing enterprises by the tribes? 247.19 Section 247.19 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... be used for commercial enterprises other than fishing enterprises by the tribes? (a) You may...

  17. Better value digital health: the medium, the market and the role of openness.

    PubMed

    Reynolds, Carl J

    2013-08-01

    The recent NHS 'hack days' have showcased the enthusiasm and talent of the junior doctor body as well as the potential of open source, open governance and small-medium enterprise. There still remains much scope for developing better value digital health services within the NHS. This article sets out the current state of NHS information technology (IT), how it fails to meet the needs of patients and professionals alike and suggests how better value digital health can be achieved.

  18. Economic Awareness and Enterprise Education in Scotland.

    ERIC Educational Resources Information Center

    Finlayson, Barry

    1988-01-01

    Discusses the initiative by the Scottish Consultative Council on the Curriculum to teach economic concepts and skills in all subject areas. Describes the Scottish government's Technical and Vocational Education Initiative (TVEI) and enterprise education programs. (LS)

  19. Exploration Enterprise Workshop - Q&A

    NASA Video Gallery

    Q&A session from May 25, 2010, at the end of Day 1 of NASA's Exploration Enterprise Workshop held in Galveston, TX. The purpose of this workshop was to present NASA's initial plans for the potentia...

  20. An Approach towards Enterprise Interoperability Assessment

    NASA Astrophysics Data System (ADS)

    Razavi, Mahsa; Aliee, Fereidoon Shams

    Enterprise Architecture (EA) as a discipline with numerous and enterprise-wide models, can support decision making on enterprise-wide issues. In order to provide such support, EA models should be amenable to analysis of various utilities and quality attributes. This paper provides a method towards EA interoperability analysis. This approach is based on Analytical Hierarchy Process (AHP) and considers the situation of the enterprise in giving weight to the different criteria and sub criteria of each utility. It proposes a quantitative method of assessing Interoperability achievement of different scenarios using AHP based on the knowledge and experience of EA experts and domain experts, and helps in deciding between them. The applicability of the proposed approach is demonstrated using a practical case study.