30 CFR 715.20 - Revegetation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... meet applicable State and Federal seed or introduced species statutes, and shall not include poisonous... for the type of plant materials selected to meet specific site conditions and climate. Any disturbed... postmining land use, the permittee shall plant trees adapted for local site conditions and climate. Trees...

Targeting treatment technologies to address specific stormwater pollutants and numeric discharge limits.

PubMed

Clark, Shirley E; Pitt, Robert

2012-12-15

Stormwater treatment is entering a new phase with stormwater management systems being required to meet specific numeric objectives, as opposed to the historic approach of meeting guidance-document-provided percent removal rates. Meeting numeric discharge requirements will require designers to better understand and apply the physical, chemical, and biological processes underpinning these treatment technologies. This critical review paper focuses on the potential unit treatment operations available for stormwater treatment and outlines how to identify the most applicable treatment options based on the needed pollutant removal goals. Copyright © 2012 Elsevier Ltd. All rights reserved.

Aerospace Non Chrome Corrosion Inhibiting Primer Systems

DTIC Science & Technology

2009-09-01

Meet all HSE specifications, TSCA, REACh, Akzo • Strippable • No weight increase over current system • Meet specification requirements for corrosion, not...Positive and negative controls • Primer only and topcoated samples Aerospace Coatings | Title 9 OEM CF Optimization/ Down Selects •Usual issues...found to be true • Good NSS ≠ Good filiform ≠ Good cure ≠ Good application properties • Down select process is to minimize ≠ and move to a balance of

Proceedings of the Thirteenth Annual Precise Time and Time Interval (PTTI) Applications and Planning Meeting

NASA Technical Reports Server (NTRS)

Wardrip, S. C.

1982-01-01

Proceedings of an annual Precise Time and Time Interval (PTTI) Applications and Planning Meeting are summarized. A transparent view of the state-of-the-art, an opportunity to express needs, a view of important future trends, and a review of relevant past accomplishments were considered for PTTI managers, systems engineers, and program planner. Specific aims were: to provide PTTI users with new and useful applications, procedures, and techniques; to allow the PTTI researcher to better assess fruitful directions for research efforts.

Mastering the Diversity Challenge: Easy On-the-Job Applications for Measurable Results.

ERIC Educational Resources Information Center

Lebo, Fern

This book provides practical, step-by-step guidelines and gives important reasons why managing diversity is good for overall business. It identifies issues specific to designated groups and provides effective techniques for creating a level playing field, as well as specific on-the-job applications for running meetings, building a team, opening…

49 CFR 178.350 - Specification 7A; general packaging, Type A.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Specification 7A; general packaging, Type A. 178... FOR PACKAGINGS Specifications for Packagings for Class 7 (Radioactive) Materials § 178.350 Specification 7A; general packaging, Type A. (a) Each packaging must meet all applicable requirements of subpart...

7 CFR 51.345 - Application of standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS) United States Standards for Grades of Apples for Processing Application of Standards § 51.345 Application of standards. (a) When a lot of apples is required to meet a specific U.S. grade, the tolerances... § 51.347 shall apply. The application of tolerances shall not apply to apples in open or bulk...

7 CFR 51.345 - Application of standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS) United States Standards for Grades of Apples for Processing Application of Standards § 51.345 Application of standards. (a) When a lot of apples is required to meet a specific U.S. grade, the tolerances... § 51.347 shall apply. The application of tolerances shall not apply to apples in open or bulk...

7 CFR 51.345 - Application of standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS) United States Standards for Grades of Apples for Processing Application of Standards § 51.345 Application of standards. (a) When a lot of apples is required to meet a specific U.S. grade, the tolerances... § 51.347 shall apply. The application of tolerances shall not apply to apples in open or bulk...

Iowa Commercial Pesticide Applicator Manual, Category 11: Aerial Applicators. CS-26.

ERIC Educational Resources Information Center

DeWitt, Jerald R., Ed.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. The text is concerned with the calibration and application of pesticides/herbicides by aircraft. Special attention is given to the field flight patterns and safety precautions which must be considered for the pilot, ground crews and the…

Proceedings of the 14th Annual Precise Time and Time Interval (PTTI) Applications Planning Meeting

NASA Technical Reports Server (NTRS)

Wardrip, S. C. (Editor)

1983-01-01

Developments and applications in the field of frequency and time are addressed. Specific topics include rubidium frequency standards, future timing requirements, noise and atomic standards, hydrogen maser technology, synchronization, and quartz technology.

Adverse Outcome Pathways: From Definition to Application

EPA Science Inventory

A challenge for both human health and ecological toxicologists is the transparent application of mechanistic (e.g., molecular, biochemical, histological) data to risk assessments. The adverse outcome pathway (AOP) is a conceptual framework designed to meet this need. Specifical...

Iowa Commercial Pesticide Applicator Manual, Category 1C: Agricultural Crop Disease Control. CS-11.

ERIC Educational Resources Information Center

Nyvall, Robert F.; Ryan, Stephen O.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. It summarizes the economically important diseases of field and forage crops such as corn, soybeans and alfalfa. Special attention is given to pesticide application methods and safety. (CS)

Apply Pesticides Correctly, A Guide for Commercial Applicators: Food Processing Pest Control.

ERIC Educational Resources Information Center

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide contains basic information to meet specific standards for pesticide applicators. Characteristics, life cycles and habits of pests such as roaches, beetles, flies, ants and rodents are discussed. Additionally, pest control measures, especially by application of aerosols, dusts, baits, fumigants or vapors, is presented. (CS)

77 FR 10783 - Meeting of National Council on the Humanities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-23

... Meetings (Open to the Public) Policy Discussion 9-10:30 a.m. Digital Humanities Room 402 Education Programs... Research Programs Room 315 (Closed to the Public) Discussion of Specific Grant Applications and Programs.... Presentation by Joan Houston Hall, editor of the Dictionary of American Regional English (DARE) 3. Staff Report...

77 FR 17055 - Sunshine Act Meeting; Deletion of Agenda Items From March 21, 2012 Open Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

...-25) and Amendment of Service and Eligibility Rules for FM Broadcast Translator Stations (MB Docket No... Reconsideration to implement a market-specific FM translator processing scheme, adopt application caps to prevent trafficking, and modify policies to expand opportunities to rebroadcast AM stations on FM translators. 3 Media...

75 FR 41404 - List of Approved Spent Fuel Storage Casks: NUHOMS®

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

.... The NRC is taking this action because the applicant identified that a certain Technical Specification (TS) for Boral characterization was not written precisely. Specifically, the requirements for meeting... changes to the technical specifications. The NRC also published a direct final rule on May 6, 2010 (75 FR...

YAMM - Yet Another Menu Manager

NASA Technical Reports Server (NTRS)

Mazer, Alan S.; Weidner, Richard J.

1991-01-01

Yet Another Menu Manager (YAMM) computer program an application-independent menuing package of software designed to remove much difficulty and save much time inherent in implementation of front ends of large packages of software. Provides complete menuing front end for wide variety of applications, with provisions for independence from specific types of terminals, configurations that meet specific needs of users, and dynamic creation of menu trees. Consists of two parts: description of menu configuration and body of application code. Written in C.

25 CFR 900.121 - What happens during the preplanning phase and can an Indian tribe or tribal organization perform...

Code of Federal Regulations, 2010 CFR

2010-04-01

... specific information regarding the type of project to be funded, the objective criteria that will be used... application that least meet the application criteria. (3) Validation. Before final acceptance of a ranked application, the information, such as demographic information, deficiency levels reported in application, the...

Chemical Gas Sensors for Aerospace Applications

NASA Technical Reports Server (NTRS)

Hunter, Gary W.; Liu, C. C.

1998-01-01

Chemical sensors often need to be specifically designed (or tailored) to operate in a given environment. It is often the case that a chemical sensor that meets the needs of one application will not function adequately in another application. The more demanding the environment and specialized the requirement, the greater the need to adapt exiting sensor technologies to meet these requirements or, as necessary, develop new sensor technologies. Aerospace (aeronautic and space) applications are particularly challenging since often these applications have specifications which have not previously been the emphasis of commercial suppliers. Further, the chemical sensing needs of aerospace applications have changed over the years to reflect the changing emphasis of society. Three chemical sensing applications of particular interest to the National Aeronautics and Space Administration (NASA) which illustrate these trends are launch vehicle leak detection, emission monitoring, and fire detection. Each of these applications reflects efforts ongoing throughout NASA. As described in NASA's "Three Pillars for Success", a document which outlines NASA's long term response to achieve the nation's priorities in aerospace transportation, agency wide objectives include: improving safety and decreasing the cost of space travel, significantly decreasing the amount of emissions produced by aeronautic engines, and improving the safety of commercial airline travel. As will be discussed below, chemical sensing in leak detection, emission monitoring, and fire detection will help enable the agency to meet these objectives. Each application has vastly different problems associated with the measurement of chemical species. Nonetheless, the development of a common base technology can address the measurement needs of a number of applications.

Integrated optical maze

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roos, E.V.; Hendrix, J.L.

1994-06-01

Improvements to Nuclear Weapons Surety through the development of new detonation control techniques incorporating electro-optic technology are reviewed and proposed in this report. The results of the Kansas City Division`s (KCD`s) literature and vendor search, potential system architecture synthesis, and device test results are the basis of this report. This study has revealed several potential reconfigureable optical interconnect architectures that meet Los Alamos National Laboratory`s preliminary performance specifications. Several planer and global architectures have the potential for meeting the Department of Energy`s applications. Preliminary conclusions on the proposed architectures are discussed. The planer approach of monolithic GaAs amplifier switch arraysmore » is the leading candidate because it meets most of the specifications now. LiNbO{sub 3} and LiTaO{sub 3} planer tree switch arrays are the second choice because they meet all the specifications except for laser power transmission. Although not atop choice, acousto-optical free space switch arrays have been considered and meet most of the specifications. Symmetric-Self Electro-Optic Effect Devices (S-SEED) free space switch arrays are being considered and have excellent potential for smart reconfigureable optical interconnects in the future.« less

40 CFR 1065.12 - Approval of alternate procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... engine meets all applicable emission standards according to specified procedures. (iii) Use statistical.... (e) We may give you specific directions regarding methods for statistical analysis, or we may approve... statistical tests. Perform the tests as follows: (1) Repeat measurements for all applicable duty cycles at...

Effective Personnel Management. The 1980 Regional Meeting NACS Traveling Troupe Presentation.

ERIC Educational Resources Information Center

Arnett, Wayne; Williams, James L.

1981-01-01

Specific suggestions are given for more effective personnel management: careful screening of applicants by one person, a well-designed application form (a sample is provided), good interview techniques, job descriptions, promotions from within, employee manuals, employee orientation, and continuing interpersonal communication. (MSE)

Christmas Tree Category Manual.

ERIC Educational Resources Information Center

Bowman, James S.; Turmel, Jon P.

This manual provides information needed to meet the standards for pesticide applicator certification. Pests and diseases of christmas tree plantations are identified and discussed. Section one deals with weeds and woody plants and the application, formulation and effects of herbicides in controlling them. Section two discusses specific diseases…

Lighting Control Best Practice Guide: Schools.

ERIC Educational Resources Information Center

2002

This publication offers design, specification, and installation guidance for lighting control appropriate for K-12 educational facilities. It features applications that illustrate the best control practices for a variety of spaces, facilitating lighting control design and application. Each best practice meets the provisions of relevant energy…

From the basics to application of cell therapy, a steppingstone to the conquest of neurodegeneration: a meeting report.

PubMed

Park, Dong-Hyuk; Eve, David J; Borlongan, Cesario V; Klasko, Stephen K; Cruz, L Eduardo; Sanberg, Paul R

2009-02-01

The annual meeting of the American Society for Neural Therapy and Repair (ASNTR) showcases the latest research trends in neurodegenerative disease and the related medical regenerative science. The 2008 ASNTR meeting covered a variety of different topics ranging from basic research to exploration of currently unknown pathogenesis and mechanisms for specific neurodegenerative disease such as Parkinson's disease, Alzheimer's disease, or stroke. This included studies to characterize stem cells, such as neural stem cells, embryonic stem cells, bone marrow mesenchymal stem cells, and human umbilical cord blood cells, for transplantation and the conditions necessary to maximize the efficacy of endogenous and exogenous stem cells, such as isolation, purification, differentiation, and migration. Moreover, a number of studies looked at methods for more advanced application of transplantation of cells or specific factors, through tissue engineering or manipulation beyond simple injection. Finally, well-known or previously un-known dietary supplementation or pharmacological materials that can affect the nervous system positively or negatively, were also important topics.

Apply Pesticides Correctly, A Guide for Commercial Applicators: Right-of-Way Pest Control.

ERIC Educational Resources Information Center

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide contains basic information to meet specific standards for pesticide applicators. The text is concerned with the recognition of weeds and methods of their control in rights-of-way. Different types of application equipment both airborne and ground are discussed with precautions for the safe and effective use of herbicides. (CS)

Iowa Commercial Pesticide Applicator Manual, Category 5: Aquatic Pest Control. CS-17.

ERIC Educational Resources Information Center

Jennings, Vivan M.; Ryan, Stephen O.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. The text is concerned with the control of aquatic weeds in a variety of water use situations, i.e. static water, limited-flow impoundments and moving water. Also discussed are the principles of limited area application such as surface or…

Iowa Commercial Pesticide Applicator Manual, Category 6: Right-of-Way Pest Control. CS-18.

ERIC Educational Resources Information Center

Jennings, Vivan M.; Ryan, Stephan O.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. The text discusses important right-of-way weeds and unwanted woody plants and provides suggestions for both long- and short-term control. Attention is also given to special problems associated with application of right-of-way herbicides.…

Apply Pesticides Correctly, A Guide for Commercial Applicators: Agricultural Pest Control -- Animal.

ERIC Educational Resources Information Center

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide contains basic information to meet specific standards for pesticide applicators. The text is concerned with the common pests of agricultural animals such as flies, ticks, bots, lice and mites. Methods for controlling these pests and appropriate pesticides are discussed. (CS)

Right Of Way Pest Control. Manual 88.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Agricultural Experiment Station.

This training manual provides information needed to meet the minimum EPA standards for certification as a commercial applicator of pesticides in the right-of-way pest control category. The text discusses types of vegetation, the nature of herbicides, application methods, use for specific situations, and safety precautions. (CS)

Iowa Supplement...For Commercial Applicators. IC-427.

ERIC Educational Resources Information Center

Iowa State Univ. of Science and Technology, Ames. Cooperative Extension Service.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. The text outlines the procedures to be followed for certification. Additionally, a general overview of important data such as toxicity of pesticides, poison control centers, record keeping, equipment maintenance and liability is…

Defining values in place: A practical application for visitor management in protected areas

Treesearch

Gordon Cessford; Mike Edginton

2007-01-01

This paper explores a value specification option to better meet a core information need in protected area management for recreation and conservation. It does not debate the meaning or definition of values, but instead identifies a perspective on values that is aimed at meeting practical conservation management needs. The first part of that perspective involves...

48 CFR 2901.603-71 - Contracting Officer's Technical Representatives (COTR).

Code of Federal Regulations, 2010 CFR

2010-10-01

... maintained by the COTR; (5) Reference to meeting applicable requirements for ethics, procurement integrity... training specifically in procurement ethics, either through courses offered periodically by the Department...

7 CFR 1728.70 - Procurement of materials.

Code of Federal Regulations, 2014 CFR

2014-01-01

... unlisted item in emergency situations and for experimental use or to meet a specific need. For purposes of... from the industry is not readily available, or the standard designs are not applicable to the borrower's specific problem under consideration. (3) RUS will make arrangements for test or experimental use...

7 CFR 1728.70 - Procurement of materials.

Code of Federal Regulations, 2012 CFR

2012-01-01

... unlisted item in emergency situations and for experimental use or to meet a specific need. For purposes of... from the industry is not readily available, or the standard designs are not applicable to the borrower's specific problem under consideration. (3) RUS will make arrangements for test or experimental use...

7 CFR 1728.70 - Procurement of materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... unlisted item in emergency situations and for experimental use or to meet a specific need. For purposes of... from the industry is not readily available, or the standard designs are not applicable to the borrower's specific problem under consideration. (3) RUS will make arrangements for test or experimental use...

7 CFR 1728.70 - Procurement of materials.

Code of Federal Regulations, 2013 CFR

2013-01-01

... unlisted item in emergency situations and for experimental use or to meet a specific need. For purposes of... from the industry is not readily available, or the standard designs are not applicable to the borrower's specific problem under consideration. (3) RUS will make arrangements for test or experimental use...

7 CFR 1728.70 - Procurement of materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... unlisted item in emergency situations and for experimental use or to meet a specific need. For purposes of... from the industry is not readily available, or the standard designs are not applicable to the borrower's specific problem under consideration. (3) RUS will make arrangements for test or experimental use...

43 CFR 419.3 - What general principles govern implementation of the TROA?

Code of Federal Regulations, 2010 CFR

2010-10-01

... conflict with those specific provisions, the specific TROA provisions control. Operations should meet all... reservoir recreation levels as described in Article Nine of the TROA. (d) Comply with applicable flood control requirements for Prosser Creek, Stampede, Boca, and Martis Creek Reservoirs. (e) Comply with all...

Pesticide Applicator Training Manual, Category 1 - Agricultural, Subcategory - Plant. A Training Program for the Certification of Commercial Pesticide Applicators.

ERIC Educational Resources Information Center

Dewey, J. E., Ed.; Pendleton, R. F., Ed.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use, particularly those associated with safety. Chapter two is concerned with the identification and diagnosis of insects…

78 FR 63164 - Certain Small Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe From Romania...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... American Society for Testing and Materials (ASTM) A- 53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A- 795, and the American Petroleum Institute (API) 5L specifications and meeting the... to the application of external heat. Seamless carbon steel pressure pipe meeting the ASTM A- 106...

20 CFR 1001.120 - Standards of performance governing State agency services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... those activities or efforts including but not limited to registration, counseling, referral to... making referrals from the group of applicants meeting the specific eligibility criteria for a particular...

Sensor Network Middleware for Cyber-Physical Systems: Opportunities and Challenges

NASA Astrophysics Data System (ADS)

Singh, G.

2015-12-01

Wireless Sensor Network middleware typically provides abstractions for common tasks such as atomicity, synchronization and communication with the intention of isolating the developers of distributed applications from lower-level details of the underlying platforms. Developing middleware to meet the performance constraints of applications is an important challenge. Although one would like to develop generic middleware services which can be used in a variety of different applications, efficiency considerations often force developers to design middleware and algorithms customized to specific operational contexts. This presentation will discuss techniques to design middleware that is customizable to suit the performance needs of specific applications. We also discuss the challenges poised in designing middleware for pervasive sensor networks and cyber-physical systems with specific focus on environmental monitoring.

Iowa Commercial Pesticide Applicator Manual, Category 1B: Agricultural Insect Control.

ERIC Educational Resources Information Center

Stockdale, Harold J.; Ryan, Stephen O.

This guide provides basic information to meet specific standards for pesticide applicators. The text is concerned with the control of economic insect pests on field and forage crops, especially corn, soybeans, and alfalfa. Full color photographs of the more destructive pests are provided to aid in identification of problems. Precautions and…

40 CFR 1060.205 - What must I include in my application?

Code of Federal Regulations, 2014 CFR

2014-07-01

... procedures you used (see § 1060.501). (d) List the specifications of the test fuel to show that it falls... the application (including the test procedures, test parameters, and test fuels) to show you meet the... certification for gasoline or some other fuel type. List each distinguishable configuration in the emission...

40 CFR 59.623 - What must I include in my application?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) List the specifications of the test fuel to show that it falls within the required ranges specified in... application (including the test procedures, test parameters, and test fuels) to show you meet the requirements... PRODUCTS Control of Evaporative Emissions From New and In-Use Portable Fuel Containers Certifying Emission...

40 CFR 59.623 - What must I include in my application?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) List the specifications of the test fuel to show that it falls within the required ranges specified in... application (including the test procedures, test parameters, and test fuels) to show you meet the requirements... PRODUCTS Control of Evaporative Emissions From New and In-Use Portable Fuel Containers Certifying Emission...

40 CFR 1060.205 - What must I include in my application?

Code of Federal Regulations, 2011 CFR

2011-07-01

... procedures you used (see § 1060.501). (d) List the specifications of the test fuel to show that it falls... the application (including the test procedures, test parameters, and test fuels) to show you meet the... certification for gasoline or some other fuel type. List each distinguishable configuration in the emission...

40 CFR 1060.205 - What must I include in my application?

Code of Federal Regulations, 2013 CFR

2013-07-01

... procedures you used (see § 1060.501). (d) List the specifications of the test fuel to show that it falls... the application (including the test procedures, test parameters, and test fuels) to show you meet the... certification for gasoline or some other fuel type. List each distinguishable configuration in the emission...

40 CFR 1060.205 - What must I include in my application?

Code of Federal Regulations, 2010 CFR

2010-07-01

... procedures you used (see § 1060.501). (d) List the specifications of the test fuel to show that it falls... the application (including the test procedures, test parameters, and test fuels) to show you meet the... certification for gasoline or some other fuel type. List each distinguishable configuration in the emission...

40 CFR 59.623 - What must I include in my application?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) List the specifications of the test fuel to show that it falls within the required ranges specified in... application (including the test procedures, test parameters, and test fuels) to show you meet the requirements... PRODUCTS Control of Evaporative Emissions From New and In-Use Portable Fuel Containers Certifying Emission...

40 CFR 59.623 - What must I include in my application?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) List the specifications of the test fuel to show that it falls within the required ranges specified in... application (including the test procedures, test parameters, and test fuels) to show you meet the requirements... PRODUCTS Control of Evaporative Emissions From New and In-Use Portable Fuel Containers Certifying Emission...

40 CFR 1060.205 - What must I include in my application?

Code of Federal Regulations, 2012 CFR

2012-07-01

... procedures you used (see § 1060.501). (d) List the specifications of the test fuel to show that it falls... the application (including the test procedures, test parameters, and test fuels) to show you meet the... certification for gasoline or some other fuel type. List each distinguishable configuration in the emission...

40 CFR 59.623 - What must I include in my application?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) List the specifications of the test fuel to show that it falls within the required ranges specified in... application (including the test procedures, test parameters, and test fuels) to show you meet the requirements... PRODUCTS Control of Evaporative Emissions From New and In-Use Portable Fuel Containers Certifying Emission...

Using Live-Crown Ratio to Control Wood Quality: An Example of Quantitative Silviculture

Treesearch

Thomas J. Dean

1999-01-01

Quantitative silviculture is the application of biological relationships in meeting specific, quantitative management objectives. It is a two-sided approach requiring the identification and application of biological relationships. An example of quantitative silviculture is presented that uses a relationship between average-live crown ratio and relative stand density...

Apply Pesticides Correctly, A Guide for Commercial Applicators: Seed Treatment.

ERIC Educational Resources Information Center

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide contains basic information to meet specific standards for pesticide applicators. The text is concerned with the types of seeds that require chemical protection against pests. Methods of treatment and labeling requirements for such seeds as rye, wheat, soybeans, peas, and grass hybrids are discussed. Safety and environmental precautions…

78 FR 59662 - Annual Public Meeting of the Interagency Steering Committee on Multimedia Environmental Modeling

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

... applications and assessment of site specific, generic, and process-oriented multimedia environmental models as... development and simulation supports interagency interests in risk assessment, uncertainty analyses, management...

Pesticide Applicator Training Manual, Category 2 - Forest Pest Control. A Training Program for the Certification of Commercial Pesticide Applicators.

ERIC Educational Resources Information Center

Sinclair, W. A., Comp.

This manual provides information needed to meet specific standards for certification as a pesticide applicator. Each of the eight chapters deals with a different aspect of pesticide use. Chapter one discusses the problems of use as it relates to safety of humans and the environment. Chapter two is concerned with the identification and diagnosis of…

Superconducting linear actuator

NASA Technical Reports Server (NTRS)

Johnson, Bruce; Hockney, Richard

1993-01-01

Special actuators are needed to control the orientation of large structures in space-based precision pointing systems. Electromagnetic actuators that presently exist are too large in size and their bandwidth is too low. Hydraulic fluid actuation also presents problems for many space-based applications. Hydraulic oil can escape in space and contaminate the environment around the spacecraft. A research study was performed that selected an electrically-powered linear actuator that can be used to control the orientation of a large pointed structure. This research surveyed available products, analyzed the capabilities of conventional linear actuators, and designed a first-cut candidate superconducting linear actuator. The study first examined theoretical capabilities of electrical actuators and determined their problems with respect to the application and then determined if any presently available actuators or any modifications to available actuator designs would meet the required performance. The best actuator was then selected based on available design, modified design, or new design for this application. The last task was to proceed with a conceptual design. No commercially-available linear actuator or modification capable of meeting the specifications was found. A conventional moving-coil dc linear actuator would meet the specification, but the back-iron for this actuator would weigh approximately 12,000 lbs. A superconducting field coil, however, eliminates the need for back iron, resulting in an actuator weight of approximately 1000 lbs.

Apply Pesticides Correctly, A Guide for Commercial Applicators: Ornamental and Turfgrass Pest Control.

ERIC Educational Resources Information Center

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide contains basic information to meet specific standards for pesticide applicators. The text is concerned with recognition and control of ornamental and turfgrass pests such as leaf spot, scab, powdery mildew, galls, grubs and weeds. A section of the text is also devoted to environmental concerns to be considered when undertaking pest…

Iowa Commercial Pesticide Applicator Manual, Category 4: Seed Treatment. CS-16.

ERIC Educational Resources Information Center

Epstein, Abraham H.; And Others

This manual provides information needed to meet specific standards for certification as a pesticide applicator. The text is concerned with the storage insects, soil insects and fungi which are the major kinds of seed pests. Chemical and nonchemical control measures and the labeling and coloring requirements for treated seed are also discussed.…

Methodologies for Root Locus and Loop Shaping Control Design with Comparisons

NASA Technical Reports Server (NTRS)

Kopasakis, George

2017-01-01

This paper describes some basics for the root locus controls design method as well as for loop shaping, and establishes approaches to expedite the application of these two design methodologies to easily obtain control designs that meet requirements with superior performance. The two design approaches are compared for their ability to meet control design specifications and for ease of application using control design examples. These approaches are also compared with traditional Proportional Integral Derivative (PID) control in order to demonstrate the limitations of PID control. Robustness of these designs is covered as it pertains to these control methodologies and for the example problems.

Case Meetings for Teaching English for Specific Academic Purposes in a Tertiary Aeronautical Engineering Programme

ERIC Educational Resources Information Center

Tatzl, Dietmar

2015-01-01

This article presents an innovative adaptation of the case method to teaching English for specific academic purposes. Widespread in its traditional form in various content disciplines, the case method bears the potential for truly student-centred language instruction. The current application transforms learners from case analysts to case authors…

Workshops of the Sixth International Brain–Computer Interface Meeting: brain–computer interfaces past, present, and future

PubMed Central

Huggins, Jane E.; Guger, Christoph; Ziat, Mounia; Zander, Thorsten O.; Taylor, Denise; Tangermann, Michael; Soria-Frisch, Aureli; Simeral, John; Scherer, Reinhold; Rupp, Rüdiger; Ruffini, Giulio; Robinson, Douglas K. R.; Ramsey, Nick F.; Nijholt, Anton; Müller-Putz, Gernot; McFarland, Dennis J.; Mattia, Donatella; Lance, Brent J.; Kindermans, Pieter-Jan; Iturrate, Iñaki; Herff, Christian; Gupta, Disha; Do, An H.; Collinger, Jennifer L.; Chavarriaga, Ricardo; Chase, Steven M.; Bleichner, Martin G.; Batista, Aaron; Anderson, Charles W.; Aarnoutse, Erik J.

2017-01-01

The Sixth International Brain–Computer Interface (BCI) Meeting was held 30 May–3 June 2016 at the Asilomar Conference Grounds, Pacific Grove, California, USA. The conference included 28 workshops covering topics in BCI and brain–machine interface research. Topics included BCI for specific populations or applications, advancing BCI research through use of specific signals or technological advances, and translational and commercial issues to bring both implanted and non-invasive BCIs to market. BCI research is growing and expanding in the breadth of its applications, the depth of knowledge it can produce, and the practical benefit it can provide both for those with physical impairments and the general public. Here we provide summaries of each workshop, illustrating the breadth and depth of BCI research and highlighting important issues and calls for action to support future research and development. PMID:29152523

Workshops of the Sixth International Brain-Computer Interface Meeting: brain-computer interfaces past, present, and future.

PubMed

Huggins, Jane E; Guger, Christoph; Ziat, Mounia; Zander, Thorsten O; Taylor, Denise; Tangermann, Michael; Soria-Frisch, Aureli; Simeral, John; Scherer, Reinhold; Rupp, Rüdiger; Ruffini, Giulio; Robinson, Douglas K R; Ramsey, Nick F; Nijholt, Anton; Müller-Putz, Gernot; McFarland, Dennis J; Mattia, Donatella; Lance, Brent J; Kindermans, Pieter-Jan; Iturrate, Iñaki; Herff, Christian; Gupta, Disha; Do, An H; Collinger, Jennifer L; Chavarriaga, Ricardo; Chase, Steven M; Bleichner, Martin G; Batista, Aaron; Anderson, Charles W; Aarnoutse, Erik J

2017-01-01

The Sixth International Brain-Computer Interface (BCI) Meeting was held 30 May-3 June 2016 at the Asilomar Conference Grounds, Pacific Grove, California, USA. The conference included 28 workshops covering topics in BCI and brain-machine interface research. Topics included BCI for specific populations or applications, advancing BCI research through use of specific signals or technological advances, and translational and commercial issues to bring both implanted and non-invasive BCIs to market. BCI research is growing and expanding in the breadth of its applications, the depth of knowledge it can produce, and the practical benefit it can provide both for those with physical impairments and the general public. Here we provide summaries of each workshop, illustrating the breadth and depth of BCI research and highlighting important issues and calls for action to support future research and development.

Information about the Catalog of Federal Domestic Assistance and EPA Programs

EPA Pesticide Factsheets

The primary purpose of the Catalog is to assist potential applicants in identifying programs which meet their specific objectives & to provide general information on Federal assistance programs. In 1977 Congress passed the Federal Program Information Act.

Apply Pesticides Correctly, A Guide for Commercial Applicators: Industrial, Institutional, Structural and Health Related Pest Control.

ERIC Educational Resources Information Center

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide contains basic information to meet the specific standards for pesticide applicators. The thrust of this document is the recognition and control of common pests. Included are those which directly affect man such as bees, roaches, mites, and mosquitoes; and those which destroy food products and wooden structures. Both mechanical and…

Novel Strategies to Improve Resident Selection by Improving Cultural Fit: AOA Critical Issues.

PubMed

Porter, Scott E; Razi, Afshin E; Ramsey, T Bennett

2017-11-15

Residency selection is a perennial multifactorial process that differs considerably from the recruitment processes that other professional occupations enjoy. The 2016 meeting of the American Orthopaedic Association's Council of Orthopaedic Residency Directors highlighted a series of symposia that sought to present a novel manner of resident selection. Specifically, the presenters for each symposium were asked to do the following: present some general recruitment best practices in industries outside of medicine, present how branding of a program may translate into a better interview season, investigate evidence that the applicant pool to orthopaedic surgery may have changed and that residency program brands may have to reflect this, and assess our current evaluation techniques for talent identification and resident selection with respect to a specific department's appearance or brand. The meeting concluded with an understanding of the level to which programs can successfully create or adopt a brand and how this may go a long way in focusing the entire match process and allow emphasis to be placed on applicants who possess desired traits. The goal for this meeting was that attendees would leave with tangible practices and techniques that could be adopted at their home institutions.

Vision Tests For Medical Surveillance Or To Insure Job Fitness

NASA Astrophysics Data System (ADS)

Wolbarsht, M. L.; Landers, M. B.

1986-05-01

The rationale for designing screening type eye examinations to document visual capabilities for specific jobs or changes in visual function following exposure to specific ocular hazards is discussed. Possible applications to clinical situations are also discussed. Specific tests meeting requirements of definite end point quantification, ease of administration, and reproducibility are given for contrast (glare) sensitivity, distortions in macular imaging (Amsler grid), and color vision. The selection is aetailed for tne individual test combinations of various populations such as automobile uriver license applicants, visual display operators, and persons exposed to lasers, including military as well as non-military installers and repairers of optical fibers for communications.

46 CFR 162.060-20 - Design and construction requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Ballast Water Management Systems... service; (4) Meets recognized national or international standards for all related marine engineering and electrical engineering applications; and (5) Operates when the vessel is upright, inclined under static...

Dual use of distributed remote sensing satellites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Canavan, G.H.

1992-12-02

Satellites can serve both defense and the environment, simultaneously monitoring preparations for aggression, the environment, pollution, and natural disasters. These applications have been discussed extensively in international meetings, which have produced specific projects for cooperation and growing acceptance of dual-use concepts.

Dual use of distributed remote sensing satellites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Canavan, G.H.

1993-03-01

Satellites can serve both defense and the environment, simultaneously monitoring preparations for aggression, the environment, pollution, and natural disasters. These applications have been discussed extensively in international meetings, which have produced specific projects for cooperation and growing acceptance of dual-use concepts.

77 FR 33337 - Rule Concerning Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-06

...The Commission seeks comment on proposed disclosures to help consumers, distributors, contractors, and installers easily determine whether a specific furnace or central air conditioner meets applicable Department of Energy regional efficiency standards.

46 CFR 162.060-20 - Design and construction requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Ballast Water Management Systems... service; (4) Meets recognized national or international standards for all related marine engineering and electrical engineering applications; and (5) Operates when the vessel is upright, inclined under static...

46 CFR 162.060-20 - Design and construction requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Ballast Water Management Systems... service; (4) Meets recognized national or international standards for all related marine engineering and electrical engineering applications; and (5) Operates when the vessel is upright, inclined under static...

Dual use of distributed remote sensing satellites

NASA Astrophysics Data System (ADS)

Canavan, G. H.

1992-12-01

Satellites can serve both defense and the environment, simultaneously monitoring preparations for aggression, the environment, pollution, and natural disasters. These applications have been discussed extensively in international meetings, which have produced specific projects for cooperation and growing acceptance of dual-use concepts.

Information about Federal Assistance Listings and the Catalog of Federal Domestic Assistance

EPA Pesticide Factsheets

The primary purpose of the Catalog is to assist potential applicants in identifying programs which meet their specific objectives & to provide general information on Federal assistance programs. In 1977 Congress passed the Federal Program Information Act.

EPA Approved New Jersey Source-Specific Requirements

EPA Pesticide Factsheets

This section sets forth the applicable State Implementation Plan (SIP) for New Jersey under section 110 of the Clean Air Act, as amended, 42 U.S.C. 7401 et seq., and 40 CFR part 51 to meet National Ambient Air Quality Standards.

Secondary Use of Patients’ Electronic Records (SUPER): An Approach for Meeting Specific Data Needs of Clinical and Translational Researchers

PubMed Central

Sholle, Evan T.; Kabariti, Joseph; Johnson, Stephen B.; Leonard, John P.; Pathak, Jyotishman; Varughese, Vinay I.; Cole, Curtis L.; Campion, Thomas R.

2017-01-01

Academic medical centers commonly approach secondary use of electronic health record (EHR) data by implementing centralized clinical data warehouses (CDWs). However, CDWs require extensive resources to model data dimensions and harmonize clinical terminology, which can hinder effective support of the specific and varied data needs of investigators. We hypothesized that an approach that aggregates raw data from source systems, ignores initial modeling typical of CDWs, and transforms raw data for specific research purposes would meet investigator needs. The approach has successfully enabled multiple tools that provide utility to the institutional research enterprise. To our knowledge, this is the first complete description of a methodology for electronic patient data acquisition and provisioning that ignores data harmonization at the time of initial storage in favor of downstream transformation to address specific research questions and applications. PMID:29854228

Natural Language Processing as a Discipline at LLNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Firpo, M A

The field of Natural Language Processing (NLP) is described as it applies to the needs of LLNL in handling free-text. The state of the practice is outlined with the emphasis placed on two specific aspects of NLP: Information Extraction and Discourse Integration. A brief description is included of the NLP applications currently being used at LLNL. A gap analysis provides a look at where the technology needs work in order to meet the needs of LLNL. Finally, recommendations are made to meet these needs.

Full Chain Benchmarking for Open Architecture Airborne ISR Systems: A Case Study for GMTI Radar Applications

DTIC Science & Technology

2015-09-15

middleware implementations via a common object-oriented software hierarchy, with library -specific implementations of the five GMTI benchmark ...Full-Chain Benchmarking for Open Architecture Airborne ISR Systems A Case Study for GMTI Radar Applications Matthias Beebe, Matthew Alexander...time performance, effective benchmarks are necessary to ensure that an ARP system can meet the mission constraints and performance requirements of

Iowa Commercial Pesticide Applicator Manual, Category 1D: Fruit and Vegetable Pest Control and Supplement. CS-12 and CS-12a.

ERIC Educational Resources Information Center

Epstein, Abraham H.; And Others

This manual provides information needed to meet specific standards for certification as a pesticide applicator. The major weed and insect pests of fruits and vegetables are pictured and discussed. Suggested methods for control by utilizing herbicides and pesticides are presented with attention given to safety considerations for both humans and the…

Inspection and Verification Guidance for WaterSense Labeled New Homes (Version 1.2)

EPA Pesticide Factsheets

A new home must be built by a WaterSense builder partner, certified by an EPA licensed certification provider, and meet all of the applicable criteria in the specification to become a WaterSense labeled new home.

Mechanical properties of direct core build-up materials.

PubMed

Combe, E C; Shaglouf, A M; Watts, D C; Wilson, N H

1999-05-01

This work was undertaken to measure mechanical properties of a diverse group of materials used for direct core build-ups, including a high copper amalgam, a silver cermet cement, a VLC resin composite and two composites specifically developed for this application. Compressive strength, elastic modulus, diametral tensile strength and flexural strength and modulus were measured for each material as a function of time up to 3 months, using standard specification tests designed for the materials. All the materials were found to meet the minimum specification requirements except in terms of flexural strength for the amalgam after 1 h and the silver cermet at all time intervals. There proved to be no obvious superior material in all respects for core build-ups, and the need exists for a specification to be established specifically for this application.

Capabilities needed for the next generation of thermo-hydraulic codes for use in real time applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arndt, S.A.

1997-07-01

The real-time reactor simulation field is currently at a crossroads in terms of the capability to perform real-time analysis using the most sophisticated computer codes. Current generation safety analysis codes are being modified to replace simplified codes that were specifically designed to meet the competing requirement for real-time applications. The next generation of thermo-hydraulic codes will need to have included in their specifications the specific requirement for use in a real-time environment. Use of the codes in real-time applications imposes much stricter requirements on robustness, reliability and repeatability than do design and analysis applications. In addition, the need for codemore » use by a variety of users is a critical issue for real-time users, trainers and emergency planners who currently use real-time simulation, and PRA practitioners who will increasingly use real-time simulation for evaluating PRA success criteria in near real-time to validate PRA results for specific configurations and plant system unavailabilities.« less

Where the Cloud Meets the Commons

ERIC Educational Resources Information Center

Ipri, Tom

2011-01-01

Changes presented by cloud computing--shared computing services, applications, and storage available to end users via the Internet--have the potential to seriously alter how libraries provide services, not only remotely, but also within the physical library, specifically concerning challenges facing the typical desktop computing experience.…

Proceedings of a Meeting on Traceability for Ionizing Radiation Measurements

NASA Astrophysics Data System (ADS)

Heaton, H. T., II

1982-02-01

General concepts for traceability were presented from several perspectives. The national standards for radiation dosimetry, radioactivity measurements, and neutron measurements were described. Specific programs for achieving traceability to the national standards for radiation measurements in medical, occupational, and environmental applications were summarized.

Low cost carbon fiber technology development for carbon fiber composite applications : phase 1.

DOT National Transportation Integrated Search

2008-01-01

The main goals of this research program at UTSI were: 1) to produce low cost carbon fibers and 2) to develop specific carbonbased : material technologies to meet current and future high performance fiber-reinforced composite needs of FTA and other : ...

49 CFR 107.503 - Registration statement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Inspector” or “Design Certifying Engineer”. The following language may be used. I certify that all Registered Inspectors and Design Certifying Engineers used in performance of the prescribed functions meet... requirements applicable to the functions to be performed. (5) A description of the specific functions to be...

46 CFR 160.053-3 - Materials, construction and workmanship.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic... workmanship of unicellular plastic foam work vests specified by this subpart shall conform to the requirements.... All components used in the construction of work vests must meet the applicable requirements of subpart...

46 CFR 160.053-3 - Materials, construction and workmanship.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic... workmanship of unicellular plastic foam work vests specified by this subpart shall conform to the requirements.... All components used in the construction of work vests must meet the applicable requirements of subpart...

46 CFR 160.053-3 - Materials, construction and workmanship.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic... workmanship of unicellular plastic foam work vests specified by this subpart shall conform to the requirements.... All components used in the construction of work vests must meet the applicable requirements of subpart...

7 CFR 1410.33 - Contract modifications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... production practices that have a site specific application that would: (i) Meet human needs for food and fiber; (ii) Enhance the environment and the natural resource base; (iii) Use nonrenewable resources... returning some or all of the land into production using sustainable grazing or crop production methods...

7 CFR 1410.33 - Contract modifications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... production practices that have a site specific application that would: (i) Meet human needs for food and fiber; (ii) Enhance the environment and the natural resource base; (iii) Use nonrenewable resources... returning some or all of the land into production using sustainable grazing or crop production methods...

7 CFR 1410.33 - Contract modifications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... production practices that have a site specific application that would: (i) Meet human needs for food and fiber; (ii) Enhance the environment and the natural resource base; (iii) Use nonrenewable resources... returning some or all of the land into production using sustainable grazing or crop production methods...

7 CFR 1410.33 - Contract modifications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... production practices that have a site specific application that would: (i) Meet human needs for food and fiber; (ii) Enhance the environment and the natural resource base; (iii) Use nonrenewable resources... returning some or all of the land into production using sustainable grazing or crop production methods...

A Comparative Analysis of Computer End-User Support in the Air Force and Civilian Organizations

DTIC Science & Technology

1991-12-01

This explanation implies a further stratification of end users based on the specific tasks they perform, a new model of application combinations, and a...its support efforts to meet the needs of its end-uiser clientele iore closely. 79 INTEGRATED .9 VERBAL ANALYTIC Figure 14. Test Model of Applications ...The IC Model : IEM, Canada. ...............19 Proliferation of ICs ... ............... 20 Services ... ..................... 21 IC States

Rapid Prototyping of Application Specific Signal Processors (RASSP) program - Study Phase

DTIC Science & Technology

1992-10-12

in the quantitative evaluaion of desip ltenatlves. To make sysmms such as IDAS mor effective for...steps, and should invest in the standardization of data models that meet these needs. PDES and CFI are likely to offer the most payoff for such an...provides a bigger picture of the ATR roadmap. It attempts to lay out the projected progress of the ATR technologies and applications, both in the

Solar heating and cooling.

PubMed

Duffie, J A

1976-01-01

Solar energy is discussed as an energy resource that can be converted into useful energy forms to meet a variety of energy needs. The review briefly explains the nature of this energy resource, the kinds of applications that can be made useful, and the status of several systems to which it has been applied. More specifically, information on solar collectors, solar water heating, solar heating of buildings, solar cooling plus other applications, are included.

Survey of Nickel-Aluminium-Bronze Casting Alloys on Marine Applications,

DTIC Science & Technology

1981-04-01

and corrosion performance of nickel-aluminium bronze (NAB)/covered by naval specification DGS-8520 and DGS-348 have been investigated. No evidence was...found to suggest that there would be any significant difference in corrosion performance between alloys meeting the two specifications. Early... corrosion problems associated with the weld repair areas of castings have been overcome largely by using improved foundry and welding techniques followed by a

Tailoring Thin Film-Lacquer Coatings for Space Application

NASA Technical Reports Server (NTRS)

Peters, Wanda C.; Harris, George; Miller, Grace; Petro, John

1998-01-01

Thin film coatings have the capability of obtaining a wide range of thermal radiative properties, but the development of thin film coatings can sometimes be difficult and costly when trying to achieve highly specular surfaces. Given any space mission's thermal control requirements, there is often a need for a variation of solar absorptance (Alpha(s)), emittance (epsilon) and/or highly specular surfaces. The utilization of thin film coatings is one process of choice for meeting challenging thermal control requirements because of its ability to provide a wide variety of Alpha(s)/epsilon ratios. Thin film coatings' radiative properties can be tailored to meet specific thermal control requirements through the use of different metals and the variation of dielectric layer thickness. Surface coatings can be spectrally selective to enhance radiative coupling and decoupling. The application of lacquer to a surface can also provide suitable specularity for thin film application without the cost and difficulty associated with polishing.

Tailoring Thin Film-Lacquer Coatings for Space Applications

NASA Technical Reports Server (NTRS)

Peters, Wanda C.; Harris, George; Miller, Grace; Petro, John

1998-01-01

Thin film coatings have the capability of obtaining a wide range of thermal radiative properties, but the development of thin film coatings can sometimes be difficult and costly when trying to achieve highly specular surfaces. Given any space mission's then-nal control requirements, there is often a need for a variation of solar absorptance (alpha(sub s)), emittance (epsilon) and/or highly specular surfaces. The utilization of thin film coatings is one process of choice for meeting challenging thermal control requirements because of its ability to provide a wide variety of alpha(sub s)/epsilon ratios. Thin film coatings' radiative properties can be tailored to meet specific thermal control requirements through the use of different metals and the variation of dielectric layer thickness. Surface coatings can be spectrally selective to enhance radiative coupling and decoupling. The application of lacquer to a surface can also provide suitable specularity for thin film application without the cost and difficulty associated with polishing.

Acquisition of flat panel displays for military applications

NASA Astrophysics Data System (ADS)

Van Atta, Richard H.; Goodell, Larry; Cohen, Brian S.; Lippitz, Michael J.; Marks, Michael B.; Bardsley, James N.; Kimzey, Charles H.

1998-09-01

Congress requested the Department of Defense (DoD) to study the acquisition of flat panel displays (FPDs) for military applications with specific attention to tradeoffs made in acquiring 'consumer-grade displays' rather than 'FPD systems that are custom designed to meet military requirements.' The study addresses: life cycle cost and performance tradeoffs, environmental and performance requirements and test data on performance of both custom and consumer-grade FPDs, life cycle cost and support issues such as commonality, supportability, and availability, potential benefits of FPD system interface standards and open systems approaches. The study found that appropriately ruggedized consumer-grade FPDs can meet the environmental and performance requirements for a broad range of military applications, including shipboard, command and control, army ground vehicles, military transport aviation, and soldier-portable computer systems. Currently, ruggedized consumer-grade FPDs cannot meet the specifications for some highly stressful applications, particularly tactical cockpit avionics. Due to lack of comparable and available data, programs have reached different judgments about the environmental tolerance and optical performance of ruggedized consumer-grade FPDs. There appear to be few systematic assessments of display performance impact on mission effectiveness. FPD availability concerns pivot on (1) the potentially rapid obsolescence of commercial FPDs and (2) the economic viability of domestic custom FPD suppliers. Display integrators using commercial FPDs are working to establish long-term supply arrangements with foreign producers of displays, but it is unclear how responsive these relationships will be in the future. Some DoD display integrators using custom FPDs believe that until the FPD market matures and stabilizes, it would be imprudent for DoD to become dependent on foreign, commercial FPD producers. However, many of these integrators are also concerned about the financial health of domestically based custom FPD producers.

42 CFR 84.141 - Breathing gas; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air...) Compressed, gaseous breathing air shall meet the applicable minimum grade requirements for Type I gaseous air set forth in the Compressed Gas Association Commodity Specification for Air, G-7.1, 1966 (Grade D or...

42 CFR 84.141 - Breathing gas; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air...) Compressed, gaseous breathing air shall meet the applicable minimum grade requirements for Type I gaseous air set forth in the Compressed Gas Association Commodity Specification for Air, G-7.1, 1966 (Grade D or...

42 CFR 84.141 - Breathing gas; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air...) Compressed, gaseous breathing air shall meet the applicable minimum grade requirements for Type I gaseous air set forth in the Compressed Gas Association Commodity Specification for Air, G-7.1, 1966 (Grade D or...

42 CFR 84.141 - Breathing gas; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air...) Compressed, gaseous breathing air shall meet the applicable minimum grade requirements for Type I gaseous air set forth in the Compressed Gas Association Commodity Specification for Air, G-7.1, 1966 (Grade D or...

40 CFR 86.1111-87 - Test procedures for PCA testing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... applicable: (i) The manufacturer may use gasoline test fuel meeting the specifications of paragraph (a) of § 86.113 for mileage accumulation. Otherwise, the manufacturer may use fuels other than those specified... the temperature of the test fuel at other than the approximate midvolume of the fuel tank, as...

40 CFR 86.1111-87 - Test procedures for PCA testing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... applicable: (i) The manufacturer may use gasoline test fuel meeting the specifications of paragraph (a) of § 86.113 for mileage accumulation. Otherwise, the manufacturer may use fuels other than those specified... the temperature of the test fuel at other than the approximate midvolume of the fuel tank, as...

Acrilan Contract Carpet Specification Guide.

ERIC Educational Resources Information Center

Monsanto Textiles Co., Atlanta, GA.

The purpose of this guide is to assist specifiers in properly specifying carpet made of Monsanto Acrilan acrylic fiber. As carpet is used in an expanding range of applications, it must meet increasing and varying regulatory requirements. Performance needs vary with the type of environment in which the carpet is installed. Carpet construction must…

40 CFR 76.10 - Alternative emission limitations.

Code of Federal Regulations, 2013 CFR

2013-07-01

...; and (ii) The installed NOX emission control system has been designed to meet the applicable emission... that the unit and NOX emission control system were operated in accordance with the bid and design specifications on which the design of the NOX emission control system was based; and (C) Unit operating data as...

40 CFR 76.10 - Alternative emission limitations.

Code of Federal Regulations, 2010 CFR

2010-07-01

...; and (ii) The installed NOX emission control system has been designed to meet the applicable emission... that the unit and NOX emission control system were operated in accordance with the bid and design specifications on which the design of the NOX emission control system was based; and (C) Unit operating data as...

40 CFR 1065.290 - PM gravimetric balance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false PM gravimetric balance. 1065.290... balance. (a) Application. Use a balance to weigh net PM on a sample medium for laboratory testing. (b) Component requirements. We recommend that you use a balance that meets the specifications in Table 1 of...

40 CFR 1065.290 - PM gravimetric balance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false PM gravimetric balance. 1065.290... balance. (a) Application. Use a balance to weigh net PM on a sample medium for laboratory testing. (b) Component requirements. We recommend that you use a balance that meets the specifications in Table 1 of...

It Takes a Community

ERIC Educational Resources Information Center

Weasmer, Jerie; Woods, Amelia Mays

2010-01-01

Modifying course plans to accommodate diverse learners seems simple in theory. However, when faced with specific applications, many teachers feel lost. In a school community, they need not feel alone. General classroom teachers have several sources of ongoing support available to help them extend their teaching repertoire to meet their students'…

Phase 1 of the near term hybrid passenger vehicles development program. Appendix A: Mission analysis and performance specification studies, volume 1

NASA Technical Reports Server (NTRS)

Traversi, M.; Barbarek, L. A. C.

1979-01-01

Applicable data was categorized and processed according to vehicle usage and trip parameters with consideration of payload (cargo, people, size) and driving cycles. A mission that maximizes the fuel potential savings for the total 1985 vehicle fleet was selected. Mission requirements that have a bearing on conventional and hybrid vehicle performance and characteristics were identified and formulated and a reference ICE vehicle was selected that meets or exceeds all requirements while maintaining within applicable constraints. Specifications for vehicle performance were established based on mission requirements, mission related vehicle characteristics, and fuel consumption.

Methodology, status and plans for development and assessment of TUF and CATHENA codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luxat, J.C.; Liu, W.S.; Leung, R.K.

1997-07-01

An overview is presented of the Canadian two-fluid computer codes TUF and CATHENA with specific focus on the constraints imposed during development of these codes and the areas of application for which they are intended. Additionally a process for systematic assessment of these codes is described which is part of a broader, industry based initiative for validation of computer codes used in all major disciplines of safety analysis. This is intended to provide both the licensee and the regulator in Canada with an objective basis for assessing the adequacy of codes for use in specific applications. Although focused specifically onmore » CANDU reactors, Canadian experience in developing advanced two-fluid codes to meet wide-ranging application needs while maintaining past investment in plant modelling provides a useful contribution to international efforts in this area.« less

Thin-film rechargeable lithium batteries

NASA Astrophysics Data System (ADS)

Dudney, N. J.; Bates, J. B.; Lubben, D.

1994-11-01

Small thin-film rechargeable cells have been fabricated with a lithium phosphorus oxynitride electrolyte, Li metal anode, and Li(1-x)Mn2O4 as the cathode film. The cathode films were fabricated by several different techniques resulting in both crystalline and amorphous films. These were compared by observing the cell discharge behavior. Estimates have been made for the scale-up of such a thin-film battery to meet the specifications for the electric vehicle application. The specific energy, energy density, and cycle life are expected to meet the USABC mid-term criteria. However, the areas of the thin-films needed to fabricate such a cell are very large. The required areas could be greatly reduced by operating the battery at temperatures near 100 C or by enhancing the lithium ion transport rate in the cathode material.

12 CFR 516.170 - When will OTS conduct a meeting on an application?

Code of Federal Regulations, 2010 CFR

2010-01-01

... application, or otherwise determines that a meeting will benefit the decision-making process. OTS may limit... inform the applicant and all commenters requesting a meeting of its decision to grant or deny a meeting request, or of its decision to conduct a meeting on its own initiative. (c) If OTS decides to conduct a...

Fire Use Planning

Treesearch

Tom Leuschen; Dale Wade; Paula Seamon

2001-01-01

The success of a fire use program is in large part dependent on a solid foundation set in clear and concise planning. The planning process results in specific goals and measurable objectives for fire application, provides a means of setting priorities, and establishes a mechanism for evaluating and refining the process to meet the desired future condition. It is an...

40 CFR 1065.210 - Work input and output sensors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Work input and output sensors. 1065... Ambient Conditions § 1065.210 Work input and output sensors. (a) Application. Use instruments as specified... sensors, transducers, and meters that meet the specifications in Table 1 of § 1065.205. Note that your...

40 CFR 1065.210 - Work input and output sensors.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Work input and output sensors. 1065... Ambient Conditions § 1065.210 Work input and output sensors. (a) Application. Use instruments as specified... sensors, transducers, and meters that meet the specifications in Table 1 of § 1065.205. Note that your...

40 CFR 1065.210 - Work input and output sensors.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Work input and output sensors. 1065... Ambient Conditions § 1065.210 Work input and output sensors. (a) Application. Use instruments as specified... sensors, transducers, and meters that meet the specifications in Table 1 of § 1065.205. Note that your...

48 CFR 14.404-2 - Rejection of individual bids.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Government cannot be determined; (2) Fails to state a price and indicates that price shall be price in effect at time of delivery; (3) States a price but qualifies it as being subject to price in effect at time... product meets applicable Government specifications; or (6) Limits rights of the Government under any...

MEETING IN TUCSON: 3MRA: A MULTI-MEDIA HUMAN AND ECOLOGICAL MODELING SYSTEM FOR SITE-SPECIFIC TO NATIONAL SCALE REGULATORY APPLICATIONS

EPA Science Inventory

3MRA provides a technology that fully integrates the full dimensionality of human and ecological exposure and risk assessment, thus allowing regulatory decisions a more complete expression of potential adverse health effects related to the disposal and reuse of contaminated waste...

40 CFR 63.7700 - What work practice standards must I meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

... obtain and maintain onsite a copy of the procedures used by the scrap supplier for either removing... applicable, or document your attempts to obtain a copy of these procedures from the scrap suppliers servicing..., you must use a binder chemical formulation that does not contain methanol as a specific ingredient of...

40 CFR 63.7700 - What work practice standards must I meet?

Code of Federal Regulations, 2011 CFR

2011-07-01

... obtain and maintain onsite a copy of the procedures used by the scrap supplier for either removing... applicable, or document your attempts to obtain a copy of these procedures from the scrap suppliers servicing..., you must use a binder chemical formulation that does not contain methanol as a specific ingredient of...

Teaching Quality Matters in Higher Education: A Case Study from Turkey and Slovakia

ERIC Educational Resources Information Center

Üstünlüoglu, Evrim

2017-01-01

Despite a growing number of studies on the effectiveness of teaching and quality in higher education, reports indicate that more work is needed regarding meeting expectations in teaching quality, in particular, in investigating lecturers' application of pedagogical knowledge when transferring discipline-specific knowledge. This study aimed to…

Meet Mai-Anh Ha | NREL

Science.gov Websites

find the best versions of the materials to guide experimentalists. "The world is complex," specifics," she says, "and then you can go from modeling into real-world applications." All to then choke me in my car," she says. Instead, she envisions a world filled with fuel cell cars

Graphene/Polyaniline Aerogel with Superelasticity and High Capacitance as Highly Compression-Tolerant Supercapacitor Electrode

NASA Astrophysics Data System (ADS)

Lv, Peng; Tang, Xun; Zheng, Ruilin; Ma, Xiaobo; Yu, Kehan; Wei, Wei

2017-12-01

Superelastic graphene aerogel with ultra-high compressibility shows promising potential for compression-tolerant supercapacitor electrode. However, its specific capacitance is too low to meet the practical application. Herein, we deposited polyaniline (PANI) into the superelastic graphene aerogel to improve the capacitance while maintaining the superelasticity. Graphene/PANI aerogel with optimized PANI mass content of 63 wt% shows the improved specific capacitance of 713 F g-1 in the three-electrode system. And the graphene/PANI aerogel presents a high recoverable compressive strain of 90% due to the strong interaction between PANI and graphene. The all-solid-state supercapacitors were assembled to demonstrate the compression-tolerant ability of graphene/PANI electrodes. The gravimetric capacitance of graphene/PANI electrodes reaches 424 F g-1 and retains 96% even at 90% compressive strain. And a volumetric capacitance of 65.5 F cm-3 is achieved, which is much higher than that of other compressible composite electrodes. Furthermore, several compressible supercapacitors can be integrated and connected in series to enhance the overall output voltage, suggesting the potential to meet the practical application.

Graphene/Polyaniline Aerogel with Superelasticity and High Capacitance as Highly Compression-Tolerant Supercapacitor Electrode.

PubMed

Lv, Peng; Tang, Xun; Zheng, Ruilin; Ma, Xiaobo; Yu, Kehan; Wei, Wei

2017-12-19

Superelastic graphene aerogel with ultra-high compressibility shows promising potential for compression-tolerant supercapacitor electrode. However, its specific capacitance is too low to meet the practical application. Herein, we deposited polyaniline (PANI) into the superelastic graphene aerogel to improve the capacitance while maintaining the superelasticity. Graphene/PANI aerogel with optimized PANI mass content of 63 wt% shows the improved specific capacitance of 713 F g -1 in the three-electrode system. And the graphene/PANI aerogel presents a high recoverable compressive strain of 90% due to the strong interaction between PANI and graphene. The all-solid-state supercapacitors were assembled to demonstrate the compression-tolerant ability of graphene/PANI electrodes. The gravimetric capacitance of graphene/PANI electrodes reaches 424 F g -1 and retains 96% even at 90% compressive strain. And a volumetric capacitance of 65.5 F cm -3 is achieved, which is much higher than that of other compressible composite electrodes. Furthermore, several compressible supercapacitors can be integrated and connected in series to enhance the overall output voltage, suggesting the potential to meet the practical application.

Strategies for Optimal MAC Parameters Tuning in IEEE 802.15.6 Wearable Wireless Sensor Networks.

PubMed

Alam, Muhammad Mahtab; Ben Hamida, Elyes

2015-09-01

Wireless body area networks (WBAN) has penetrated immensely in revolutionizing the classical heath-care system. Recently, number of WBAN applications has emerged which introduce potential limits to existing solutions. In particular, IEEE 802.15.6 standard has provided great flexibility, provisions and capabilities to deal emerging applications. In this paper, we investigate the application-specific throughput analysis by fine-tuning the physical (PHY) and medium access control (MAC) parameters of the IEEE 802.15.6 standard. Based on PHY characterizations in narrow band, at the MAC layer, carrier sense multiple access collision avoidance (CSMA/CA) and scheduled access protocols are extensively analyzed. It is concluded that, IEEE 802.15.6 standard can satisfy most of the WBANs applications throughput requirements by maximum achieving 680 Kbps. However, those emerging applications which require high quality audio or video transmissions, standard is not able to meet their constraints. Moreover, delay, energy efficiency and successful packet reception are considered as key performance metrics for comparing the MAC protocols. CSMA/CA protocol provides the best results to meet the delay constraints of medical and non-medical WBAN applications. Whereas, the scheduled access approach, performs very well both in energy efficiency and packet reception ratio.

Multichip module technology for automotive application

NASA Astrophysics Data System (ADS)

Johnson, R. Wayne; Evans, John L.; Bosley, Larry

1995-01-01

Advancements in multichip module technology are creating design freedoms previously unavailable to design engineers. These advancements are opening new markets for laminate based multichip module products. In particular, material improvements in laminate printed wiring boards are allowing multichip module technology to meet more stringent environmental conditions. In addition, improvements in encapsulants and adhesives are enhancing the capabilities of multichip module technology to meet harsh environment. Furthermore, improvements in manufacturing techniques are providing the reliability improvements necessary for use in high quality electronic systems. These advances are making multichip module technology viable for high volume, harsh environment applications like under-the-hood automotive electronics. This paper will provide a brief review of multichip module technology, a discussion of specific research activities with Chrysler for use of multichip modules in automotive engine controllers and finally a discussion of prototype multichip modules fabricated and tested.

Incorporating Skew into RMS Surface Roughness Probability Distribution

NASA Technical Reports Server (NTRS)

Stahl, Mark T.; Stahl, H. Philip.

2013-01-01

The standard treatment of RMS surface roughness data is the application of a Gaussian probability distribution. This handling of surface roughness ignores the skew present in the surface and overestimates the most probable RMS of the surface, the mode. Using experimental data we confirm the Gaussian distribution overestimates the mode and application of an asymmetric distribution provides a better fit. Implementing the proposed asymmetric distribution into the optical manufacturing process would reduce the polishing time required to meet surface roughness specifications.

Iowa Commercial Pesticide Applicator Manual, Category 7A: General and Household Pest Control. CS-19. Category 7B: Termite Control, CS-20. Category 7C: Food Industry Pest Control, CS-21. Category 7D: Community Insect Control, CS-22.

ERIC Educational Resources Information Center

Stockdale, Harold J., Ed.; And Others

This manual provides information needed to meet specific standards for certification as a pesticide applicator. The first section discusses general and household pest control and is concerned with parasitic pests and man, stored product pests, and irritating vertebrates. Section two is devoted to identifying and controlling structural pests such…

Combining real-time monitoring and knowledge-based analysis in MARVEL

NASA Technical Reports Server (NTRS)

Schwuttke, Ursula M.; Quan, A. G.; Angelino, R.; Veregge, J. R.

1993-01-01

Real-time artificial intelligence is gaining increasing attention for applications in which conventional software methods are unable to meet technology needs. One such application area is the monitoring and analysis of complex systems. MARVEL, a distributed monitoring and analysis tool with multiple expert systems, was developed and successfully applied to the automation of interplanetary spacecraft operations at NASA's Jet Propulsion Laboratory. MARVEL implementation and verification approaches, the MARVEL architecture, and the specific benefits that were realized by using MARVEL in operations are described.

Solar applications analysis for energy storage

NASA Technical Reports Server (NTRS)

Blanchard, T.

1980-01-01

The role of energy storage as it relates to solar energy systems is considered. Storage technologies to support solar energy applications, the status of storage technologies, requirements and specifications for storage technologies, and the adequacy of the current storage research and development program to meet these requirements are among the factors discussed. Emphasis is placed on identification of where the greatest potential exists for energy storage in support of those solar energy systems which could have a significant impact on the U.S. energy mix.

Development of an advanced high-temperature fastener system for advanced aerospace vehicle application

NASA Technical Reports Server (NTRS)

Kull, F. R.

1975-01-01

The results of a program to develop a lightweight high temperature reusable fastening system for aerospace vehicle thermal protection system applications are documented. This feasibility program resulted in several fastener innovations which will meet the specific needs of the heat shield application. Three systems were designed from Hayes 188 alloy and tested by environmental exposure and residual mechanical properties. The designs include a clinch stud with a collar retainer, a weld stud with a split ring retainer, and a caged stud with a collar retainer. The results indicated that a lightweight, reusable, high temperature fastening system can be developed for aerospace vehicle application.

General Aviation Interior Noise. Part 2; In-Flight Source/Verification

NASA Technical Reports Server (NTRS)

Unruh, James F.; Till, Paul D.; Palumbo, Daniel L. (Technical Monitor)

2002-01-01

The technical approach made use of the Cessna Model 182E aircraft used in the previous effort as a test bed for noise control application. The present phase of the project reports on flight test results during application of various passive noise treatments in an attempt to verify the noise sources and paths for the aircraft. The data presented establishes the level of interior noise control that can be expected for various passive noise control applications within the aircraft cabin. Subsequent testing will address specific testing to demonstrate the technology available to meet a specified level of noise control by application of passive and/or active noise control technology.

A review of competencies developed for disaster healthcare providers: limitations of current processes and applicability.

PubMed

Daily, Elaine; Padjen, Patricia; Birnbaum, Marvin

2010-01-01

In order to prepare the healthcare system and healthcare personnel to meet the health needs of populations affected by disasters, educational programs have been developed by numerous academic institutions, hospitals, professional organizations, governments, and non-government organizations. Lacking standards for best practices as a foundation, many organizations and institutions have developed "core competencies" that they consider essential knowledge and skills for disaster healthcare personnel. The Nursing Section of the World Association for Disaster and Emergency Medicine (WADEM) considered the possibility of endorsing an existing set of competencies that could be used to prepare nurses universally to participate in disaster health activities. This study was undertaken for the purpose of reviewing published disaster health competencies to determine commonalities and universal applicability for disaster preparedness. In 2007, a review of the electronic literature databases was conducted using the major keywords: disaster response competencies; disaster preparedness competencies; emergency response competencies; disaster planning competencies; emergency planning competencies; public health emergency preparedness competencies; disaster nursing competencies; and disaster nursing education competencies. A manual search of references and selected literature from public and private sources also was conducted. Inclusion criteria included: English language; competencies listed or specifically referred to; competencies relevant to disaster, mass-casualty incident (MCI), or public health emergency; and competencies relevant to healthcare. Eighty-six articles were identified; 20 articles failed to meet the initial inclusion criteria; 27 articles did not meet the additional criteria, leaving 39 articles for analysis. Twenty-eight articles described competencies targeted to a specific profession/discipline, while 10 articles described competencies targeted to a defined role or function during a disaster. Four of the articles described specific competencies according to skill level, rather than to a specific role or function. One article defined competencies according to specific roles as well as proficiency levels. Two articles categorized disaster nursing competencies according to the phases of the disaster management continuum. Fourteen articles described specified competencies as "core" competencies for various target groups, while one article described "cross-cutting" competencies applicable to all healthcare workers. Hundreds of competencies for disaster healthcare personnel have been developed and endorsed by governmental and professional organizations and societies. Imprecise and inconsistent terminology and structure are evident throughout the reviewed competency sets. Universal acceptance and application of these competencies are lacking and none have been validated. Further efforts must be directed to developing a framework and standardized terminology for the articulation of competency sets for disaster health professionals that can by accepted and adapted universally.

RT-Syn: A real-time software system generator

NASA Technical Reports Server (NTRS)

Setliff, Dorothy E.

1992-01-01

This paper presents research into providing highly reusable and maintainable components by using automatic software synthesis techniques. This proposal uses domain knowledge combined with automatic software synthesis techniques to engineer large-scale mission-critical real-time software. The hypothesis centers on a software synthesis architecture that specifically incorporates application-specific (in this case real-time) knowledge. This architecture synthesizes complex system software to meet a behavioral specification and external interaction design constraints. Some examples of these external constraints are communication protocols, precisions, timing, and space limitations. The incorporation of application-specific knowledge facilitates the generation of mathematical software metrics which are used to narrow the design space, thereby making software synthesis tractable. Success has the potential to dramatically reduce mission-critical system life-cycle costs not only by reducing development time, but more importantly facilitating maintenance, modifications, and extensions of complex mission-critical software systems, which are currently dominating life cycle costs.

Block 4 solar cell module design and test specification for residential applications

NASA Technical Reports Server (NTRS)

1978-01-01

Near-term design, qualification and acceptance requirements are provided for terrestrial solar cell modules suitable for incorporation in photovoltaic power sources (2 kW to 10 kW) applied to single family residential installations. Requirement levels and recommended design limits for selected performance criteria are specified for modules intended principally for rooftop installations. Modules satisfying the requirements of this specification fall into one of two categories, residential panel or residential shingle, both meeting general performance requirements plus additional category peculiar constraints.

Optical design for consumer products

NASA Astrophysics Data System (ADS)

Gupta, Anurag

2014-10-01

Optical engineers often limit their focus on meeting the provided targets on performance and geometry and assume that the specifications are largely non-negotiable. Such approach ignores the value proposition behind the product and the challenges associated with overall product design, manufacturing, business development and legal issues. As a result, the design effort can be expensive, time consuming and can result in product failure. We discuss a product based systems engineering approach that leads to an application specific optical design that is more effective and efficient to implement.

The programming language HAL: A specification

NASA Technical Reports Server (NTRS)

1971-01-01

HAL accomplishes three significant objectives: (1) increased readability, through the use of a natural two-dimensional mathematical format; (2) increased reliability, by providing for selective recognition of common data and subroutines, and by incorporating specific data-protect features; (3) real-time control facility, by including a comprehensive set of real-time control commands and signal conditions. Although HAL is designed primarily for programming on-board computers, it is general enough to meet nearly all the needs in the production, verification and support of aerospace, and other real-time applications.

Reuse of textile effluent treatment plant sludge in building materials.

PubMed

Balasubramanian, J; Sabumon, P C; Lazar, John U; Ilangovan, R

2006-01-01

This study examines the potential reuse of textile effluent treatment plant (ETP) sludge in building materials. The physico-chemical and engineering properties of a composite textile sludge sample from the southern part of India have been studied. The tests were conducted as per Bureau of Indian Standards (BIS) specification codes to evaluate the suitability of the sludge for structural and non-structural application by partial replacement of up to 30% of cement. The cement-sludge samples failed to meet the required strength for structural applications. The strength and other properties met the Bureau of Indian Standards for non-structural materials such as flooring tiles, solid and pavement blocks, and bricks. Results generally meet most ASTM standards for non-structural materials, except that the sludge-amended bricks do not meet the Grade NW brick standard. It is concluded that the substitution of textile ETP sludge for cement, up to a maximum of 30%, may be possible in the manufacturing of non-structural building materials. Detailed leachability and economic feasibility studies need to be carried out as the next step of research.

12 CFR 407.4 - Procedures applicable to other meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Procedures applicable to other meetings. 407.4 Section 407.4 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES REGULATIONS GOVERNING PUBLIC OBSERVATION OF EX-IM BANK MEETINGS § 407.4 Procedures applicable to other meetings. (a) Amendments. (1) For...

24 CFR 108.25 - Compliance meeting.

Code of Federal Regulations, 2014 CFR

2014-04-01

... meeting. If an applicant fails to comply with requirements under § 108.15 or § 108.20 or it appears that... race and sex of the composition of the staff; (8) Copies of applications and waiting lists of... attend the meeting. If the applicant fails to attend the meeting scheduled pursuant to this section, the...

24 CFR 108.25 - Compliance meeting.

Code of Federal Regulations, 2013 CFR

2013-04-01

... meeting. If an applicant fails to comply with requirements under § 108.15 or § 108.20 or it appears that... race and sex of the composition of the staff; (8) Copies of applications and waiting lists of... attend the meeting. If the applicant fails to attend the meeting scheduled pursuant to this section, the...

24 CFR 108.25 - Compliance meeting.

Code of Federal Regulations, 2011 CFR

2011-04-01

... meeting. If an applicant fails to comply with requirements under § 108.15 or § 108.20 or it appears that... race and sex of the composition of the staff; (8) Copies of applications and waiting lists of... attend the meeting. If the applicant fails to attend the meeting scheduled pursuant to this section, the...

Strengthening materials specifications

NASA Astrophysics Data System (ADS)

Sampath, K.

2005-10-01

Continuing efforts to strengthen materials specifications readily recognize that a mere compliance with a materials specification only assures a material meeting or exceeding the minimum expectations explicitly detailed in the specification. Implicitly, such efforts also recognize that additional and specific client needs must be addressed as supplementary requirements and introduced during material procurement to reduce risks and assure enhanced performance. This article describes two U.S. Navy-related case studies that allowed further strengthening of the materials specification process, using newer methods and renewed understanding. The first case demonstrates the use of a constraints-based modeling approach to specify the chemical composition of high-performance welding electrodes for critical U.S. Navy applications. This approach helps to distinguish high-performance welding electrode chemical compositions from rich and lean welding electrode chemical compositions that might limit the operational envelope, reduce performance, or both, while increasing overall cost of fabrication but otherwise meet electrode specification requirements. The second case identifies that the size of an ingot could be an important factor while specifying the aluminum and sulfur contents of very large-size, heavy-gauge plates. Renewed understanding of melt fluidity issues associated with the solidification of very large-size ingots shows that deficiencies in through-thickness ductility of heavy-gauge plates are related to controlling aluminum and sulfur contents of the voluminous melt, notwithstanding explicit compliance with specification requirements.

76 FR 58277 - Animal Generic Drug User Fee Act; Public Meeting; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

... including specific suggestions for changes to the goals referred to in section 740A(a) of FD&C Act; (3... performance goals for certain submissions over 5 years from fiscal year (FY) 2009 through FY 2013. These review performance goals strive to expedite the review of abbreviated new animal drug applications...

A Logistic Regression Analysis of Student Experience Factors for the Enhancement of Developmental Post-Secondary Retention Initiatives

ERIC Educational Resources Information Center

Shenkle, Michael Thomas

2017-01-01

In response to stagnant undergraduate completion rates and growing demands for post-secondary accountability, institutions are actively pursuing effective, broadly applicable methods for promoting student success. One notable scarcity in existing research is found in the tailoring of broad academic interventions to better meet the specific needs…

The global land-potential knowledge system (LandPKS): Supporting evidence-based, site-specific land use and management through cloud computing, mobile applications and crowdsourcing

USDA-ARS?s Scientific Manuscript database

Agricultural production must increase significantly to meet the needs of a growing global population with increasing per capita consumption of food, fiber, building materials, and fuel. Consumption already exceeds net primary production in many parts of the world. In addition to reducing consumptio...

Application of theory to propeller design

NASA Technical Reports Server (NTRS)

Cox, G. G.; Morgan, W. B.

1974-01-01

The various theories concerning propeller design are discussed. The use of digital computers to obtain specific blade shapes to meet appropriate flow conditions is emphasized. The development of lifting-line and lifting surface configurations is analyzed. Ship propulsive performance and basic propeller design considerations are investigated. The characteristics of supercavitating propellers are compared with those of subcavitating propellers.

Assurance of lubricant supply in wet-lubricated space bearings

NASA Technical Reports Server (NTRS)

Glassow, F. A.

1976-01-01

Conventional lubrication techniques appear to be satisfactory, but rigorous proof of meeting a ten-year life requirement is lacking. One approach provides additional lubricant only when commanded from ground control, while the other passively augments lubrication at all times. Each technique has specific advantages, and selection should be related to the application to obtain optimum performance.

40 CFR 1065.225 - Intake-air flow meter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... flow meter. (a) Application. You may use an intake-air flow meter in combination with a chemical..., you may use an intake-air flow meter signal that does not give the actual value of raw exhaust, as... requirements. We recommend that you use an intake-air flow meter that meets the specifications in Table 1 of...

40 CFR 1065.295 - PM inertial balance for field-testing analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false PM inertial balance for field-testing... inertial balance for field-testing analysis. (a) Application. You may use an inertial balance to quantify... balance that meets the specifications in Table 1 of § 1065.205. Note that your balance-based system must...

40 CFR 1065.295 - PM inertial balance for field-testing analysis.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false PM inertial balance for field-testing... inertial balance for field-testing analysis. (a) Application. You may use an inertial balance to quantify... balance that meets the specifications in Table 1 of § 1065.205. Note that your balance-based system must...

A survey of advanced battery systems for space applications

NASA Technical Reports Server (NTRS)

Attia, Alan I.

1989-01-01

The results of a survey on advanced secondary battery systems for space applications are presented. Fifty-five battery experts from government, industry and universities participated in the survey by providing their opinions on the use of several battery types for six space missions, and their predictions of likely technological advances that would impact the development of these batteries. The results of the survey predict that only four battery types are likely to exceed a specific energy of 150 Wh/kg and meet the safety and reliability requirements for space applications within the next 15 years.

Commercial technologies from the SP-100 program

NASA Astrophysics Data System (ADS)

Truscello, Vincent C.; Fujita, Toshio; Mondt, Jack F.

1995-01-01

For more than a decade, the Jet Propulsion Labortory (JPL) and Los Alamos National Laboratory (LANL) have managed a multi-agency funded effort to develop a space reactor power system. This SP-100 Program has developed technologies required for space power systems that can be implemented in the industrial and commercial sectors to improve our competitiveness in the global economy. Initial steps taken to transfer this technology from the laboratories to industrial and commercial entities within the United States include: (1) identifying specific technologies having commercial potential; (2) distributing information describing the identified technologies and interacting with interested commercial and industrial entities to develop application-specific details and requirements; and (3) providing a technological data base that leads to transfer of technology or the forming of teaming arrangements to accomplish the transfer by tailoring the technology to meet application-specific requirements. SP-100 technologies having commercial potential encompass fabrication processes, devices, and components. Examples are a process for bonding refractory metals to graphite, a device to sense the position of an actuator and a component to enable rotating machines to operate without supplying lubrication ( a self-lubricating ball bearing). Shortly after the National Aeronautics and Space Administration (NASA) Regional Technology Transfer Centers widely disseminated information covering SP-100 technologies, over one hundred expressions of interest were received. These early responses indicate that there is a large potential benefit in transferring SP-100 technology. Interactions with industrial and commercial entities have identified a substantial need for creating teaming arrangements involving the interested entity and personnel from laboratories and their contractors, who have the knowledge and ability to tailor the technology to meet application-specific requirements.

76 FR 44309 - Applications for New Awards; Charter Schools Program Grants to Non-State Educational Agencies for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... application meets Competitive Preference Priority 1, up to an additional two points to an application depending on how well the application meets Competitive Preference Priority 2, and up to an additional two...: Applicants approved for funding under this competition must attend an in-person, two-day meeting for project...

Study of multiple cycles valves

NASA Technical Reports Server (NTRS)

Wichmann, H.

1973-01-01

A discussion is presented regarding valves which can be cycled repeatedly and are available from industry for application in the inlet system for the Pioneer Venus Probe mass spectrometer. Both solenoid type and latching type valves are considered. The study is divided into two principal areas: (1) preparation of a valve specification reflecting the requirements of the inlet system cyclic valves for the Pioneer Venus Probe mass spectrometer and the submittal of this specification to potential valve suppliers for their response and proposal; (2) preparation of a design layout of an optimum cyclic valve meeting all of the valve specification requirements.

Development trends in IR detector coolers

NASA Astrophysics Data System (ADS)

Mai, M.; Rühlich, I.; Wiedmann, Th.; Rosenhagen, C.

2009-05-01

For different IR application specific cooler requirements are needed to achieve best performance on system level. Handheld applications require coolers with highest efficiency and lowest weight. For application with continuous operation, i.e. border surveillance or homeland security, a very high MTTF is mandatory. Space applications additionally require extremely high reliability. In other application like fighter aircraft sufficient cooling capacity even at extreme high reject temperatures has to be provided. Meeting all this requirements within one cooler design is technically not feasible. Therefore, different coolers designs like integral rotary, split rotary or split linear are being employed. The use of flexure bearings supporting the driving mechanism has generated a new sub-group for the linear coolers; also, the coolers may either use a motor with moving magnet or with moving coil. AIM has mainly focussed on long life linear cooler technology and therefore developed a series of moving magnet flexure bearing compressors which meets MTTF's exceeding 20,000h (up to 50,000h with a Pulse-Tube coldfinger). These compressors have a full flexure bearing support on both sides of the driving mechanism. Cooler designs are being compared in regard to characteristic figures as described above.

77 FR 5305 - Hazardous Materials: Special Permit and Approval Applicant Fitness Determinations; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

.... PHMSA-2011-0283; Notice No. 12-2] Hazardous Materials: Special Permit and Approval Applicant Fitness... conduct a public meeting to discuss Special Permit and Approval applicant fitness determinations. The... used when determining an applicant's minimum level of fitness. DATES: Public Meeting: Wednesday...

Pre-Application Meeting for TCGA Expansion RFA - TCGA

Cancer.gov

The National Cancer Institute (NCI) hosted a pre-application meeting for TCGA funding of Genome Characterization Centers and Genome Data Analysis Centers. At this pre-application meeting, NCI staff presented on the goals and objectives for the TCGA Research Network, discussed the Request for Applications (RFA) peer review process and answered questions.

Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

NASA Technical Reports Server (NTRS)

ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

Application Level Processing for Long-Lived and Information Rich Wireless Sensor Networks

NASA Astrophysics Data System (ADS)

Wilkins, R.; Gaura, E.; Brusey, J.

2013-12-01

A primary design goal in Wireless Sensor Networks (WSNs) is to ensure the longest possible node lifetime with the available power budget while still meeting application requirements. Since radio transmissions often consume the most power in WSN devices, it follows that a node should aim to maximise its lifetime by transmitting only the data or information required to enable the motivating application. Full raw data streams are often not required since summaries of data are sufficient to meet application needs summaries are often performed at a central point after collection). When raw data is not a requirement, it makes sense to perform as much application-specific processing on-node as possible to minimise the amount of transmissions a node must make. For example, in home environment monitoring, the amount of time a room spends within an acceptable temperature range is more important than the raw stream of temperature measurements. The work presents Bare Necessities (BN) which implements the calculation of application-specific summaries on-node. In the case of knowing the amount time a room spends within an acceptable temperature range, BN encodes the raw signal as a distribution over bins (e.g. a bin might comprise temperatures between 18 °C and 22 °C). BN conserves power by only transmitting when changes to the distribution occur only sending the bare necessities of information the end user is interested in (thus the algorithm name). In the case of home monitoring it has been shown that BN can lead to a packet transmission reduction of 99.98%, increasing a nodes lifetime by a factor of 14 when compared to sense-and-send nodes. A summary of the Bare Necessities process at the node.

Continuous Inquiry Meets Continued Critique: The Professional Learning Community in Practice and the Resistance of (Un)Willing Participants

ERIC Educational Resources Information Center

Elbousty, Youness; Bratt, Kirstin

2010-01-01

The term Professional Learning Community is commonplace, and it holds many meanings and suggestions. For the purpose of this essay, however, we discuss a specific Professional Learning Community (PLC) that was established in a high school, fifteen months prior to the application of a survey instrument to evaluate participants' perceptions on the…

Universal Design for Learning in the Classroom: Practical Applications. What Works for Special-Needs Learners Series

ERIC Educational Resources Information Center

Hall, Tracey E., Ed.; Meyer, Anne, Ed.; Rose, David H., Ed.

2012-01-01

Clearly written and well organized, this book shows how to apply the principles of universal design for learning (UDL) across all subject areas and grade levels. The editors and contributors describe practical ways to develop classroom goals, assessments, materials, and methods that use UDL to meet the needs of all learners. Specific teaching…

Development and application of a spatial IBM to forecast greater prairie-chicken population responses to land use in the Flint Hills region of Kansas - SCB meeting

EPA Science Inventory

Greater prairie-chicken (Tympanachus cupido) populations have been on the decline for decades. Recent efforts to reverse this trend are focusing on two specific disturbance regimes, cattle grazing and field burning, both prevalent in the Flint Hill region of Kansas -- an area of...

10 CFR Appendix C to Part 52 - Design Certification Rule for the AP600 Design

Code of Federal Regulations, 2013 CFR

2013-01-01

... design, in accordance with 10 CFR part 52, subpart B. The applicant for certification of the AP600 design... appendix. B. Generic technical specifications means the information, required by 10 CFR 50.36 and 50.36a... licensee must meet the requirement in Section III.B of this appendix to reference Tier 2 when referencing...

77 FR 46067 - Multistakeholder Meetings To Develop Consumer Data Privacy Code of Conduct Concerning Mobile...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-02

... Meetings To Develop Consumer Data Privacy Code of Conduct Concerning Mobile Application Transparency AGENCY... convene meetings of a privacy multistakeholder process concerning mobile application transparency. DATES... of NTIA- convened multistakeholder discussions concerning mobile application transparency. The first...

78 FR 19461 - Multistakeholder Meetings To Develop Consumer Data Privacy Code of Conduct Concerning Mobile...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-01

... Meetings To Develop Consumer Data Privacy Code of Conduct Concerning Mobile Application Transparency AGENCY... convene meetings of a privacy multistakeholder process concerning mobile application transparency. This... of a series of NTIA-convened multistakeholder discussions concerning mobile application transparency...

Subsonic aircraft: Evolution and the matching of size to performance

NASA Technical Reports Server (NTRS)

Loftin, L. K., Jr.

1980-01-01

Methods for estimating the approximate size, weight, and power of aircraft intended to meet specified performance requirements are presented for both jet-powered and propeller-driven aircraft. The methods are simple and require only the use of a pocket computer for rapid application to specific sizing problems. Application of the methods is illustrated by means of sizing studies of a series of jet-powered and propeller-driven aircraft with varying design constraints. Some aspects of the technical evolution of the airplane from 1918 to the present are also briefly discussed.

Building America Case Study: Simple Retrofit High-Efficiency Natural Gas Water Heater Field Test, Minneapolis, Minnesota

DOE Office of Scientific and Technical Information (OSTI.GOV)

T. Schirber, B. Schoenbauer

High-performance water heaters are typically more time consuming and costly to install in retrofit applications, making high-performance water heaters difficult to justify economically. However, recent advancements in high-performance water heaters have targeted the retrofit market, simplifying installations and reducing costs. Four high-efficiency natural gas water heaters designed specifically for retrofit applications were installed in single-family homes along with detailed monitoring systems to characterize their savings potential, their installed efficiencies, and their ability to meet household demands.

The JPL space photovoltaic program. [energy efficient so1 silicon solar cells for space applications

NASA Technical Reports Server (NTRS)

Scott-Monck, J. A.

1979-01-01

The development of energy efficient solar cells for space applications is discussed. The electrical performance of solar cells as a function of temperature and solar intensity and the influence of radiation and subsequent thermal annealing on the electrical behavior of cells are among the factors studied. Progress in GaAs solar cell development is reported with emphasis on improvement of output power and radiation resistance to demonstrate a solar cell array to meet the specific power and stability requirements of solar power satellites.

76 FR 9378 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

...: This meeting will review applications for Philosophy, Religion, and History of Science in Collaborative...: This meeting will review applications for Philosophy and Religion in Scholarly Editions, submitted to...

77 FR 75409 - Multistakeholder Meetings To Develop Consumer Data Privacy Code of Conduct Concerning Mobile...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-20

... Meetings To Develop Consumer Data Privacy Code of Conduct Concerning Mobile Application Transparency AGENCY... convene meetings of a privacy multistakeholder process concerning mobile application transparency. DATES... are part of a series of NTIA-convened multistakeholder discussions concerning mobile application...

Low cost microminiature refrigerators for large unit volume applications

NASA Technical Reports Server (NTRS)

Duboc, R. M., Jr.

1983-01-01

Photolithographic techniques were employed to fabricate small Joule-Thomson refrigerators in laminated substrates. The gas passages of a J-T refrigerator are formed by etching channels as narrow as 50 microns and as shallow as 5 microns in glass plates which are laminated together. Circular refrigerators on the order of 1.5 centimeters in diameter and .75 millimeters thick were produced which cool down to cryogenic temperatures in a few seconds, using Argon or Nitrogen, with no vacuum or radiation insulation. Smaller refrigerators are developed for both faster cooldown and low refrigeration capacity applications. By using this technology, custom refrigerators can be designed to meet specific application requirements.

Integrated Lunar Information Architecture for Decision Support Version 3.0 (ILIADS 3.0)

NASA Technical Reports Server (NTRS)

Talabac, Stephen; Ames, Troy; Blank, Karin; Hostetter, Carl; Brandt, Matthew

2013-01-01

ILIADS 3.0 provides the data management capabilities to access CxP-vetted lunar data sets from the LMMP-provided Data Portal and the LMMP-provided On-Moon lunar data product server. (LMMP stands for Lunar Mapping and Modeling Project.) It also provides specific quantitative analysis functions to meet the stated LMMP Level 3 functional and performance requirements specifications that were approved by the CxP. The purpose of ILIADS 3.0 is to provide an integrated, rich client lunar GIS software application

46 CFR 10.107 - Definitions in subchapter B.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Guard has officially acknowledged in writing that the material or process at issue meets the applicable... or process as meeting the applicable requirements; or that an entity acting on behalf of the Coast Guard under a Memorandum of Agreement has determined that the material or process meets the applicable...

Results of Long Term Life Tests of Large Scale Lithium-Ion Cells

NASA Astrophysics Data System (ADS)

Inoue, Takefumi; Imamura, Nobutaka; Miyanaga, Naozumi; Yoshida, Hiroaki; Komada, Kanemi

2008-09-01

High energy density Li-ion cells have been introduced to latest satellites and another space usage. We have started development of large scale Li-ion cells for space applications in 1997. The chemical design was fixed in 1999.It is very important to confirm life performance to apply satellite applications because it requires long mission life such as 15 years for GEO and 5 to 7 years for LEO. Therefore we started life test at various conditions. And the tests have reached 8 to 9 years in actual calendar time. Semi - accelerated GEO tests which gives both calendar and cycle loss have been reached 42 season that corresponds 21 years in orbit. The specific energy range is 120 - 130 Wh/kg at EOL. According to the test results, we have confirmed that our Li-ion cell meets general requirements for space application such as GEO and LEO with quite high specific energy.

1.5 MW RF Load for ITER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ives, Robert Lawrence; Marsden, David; Collins, George

Calabazas Creek Research, Inc. developed a 1.5 MW RF load for the ITER fusion research facility currently under construction in France. This program leveraged technology developed in two previous SBIR programs that successfully developed high power RF loads for fusion research applications. This program specifically focused on modifications required by revised technical performance, materials, and assembly specification for ITER. This program implemented an innovative approach to actively distribute the RF power inside the load to avoid excessive heating or arcing associated with constructive interference. The new design implemented materials and assembly changes required to meet specifications. Critical components were builtmore » and successfully tested during the program.« less

The latency validation of the optical link for the ATLAS Liquid Argon Calorimeter Phase-I trigger upgrade

NASA Astrophysics Data System (ADS)

Deng, B.; Xiao, L.; Zhao, X.; Baker, E.; Gong, D.; Guo, D.; He, H.; Hou, S.; Liu, C.; Liu, T.; Sun, Q.; Thomas, J.; Wang, J.; Xiang, A. C.; Yang, D.; Ye, J.; Zhou, W.

2018-05-01

Two optical data link data transmission Application Specific Integrated Circuits (ASICs), the baseline and its backup, have been designed for the ATLAS Liquid Argon (LAr) Calorimeter Phase-I trigger upgrade. The latency of each ASIC and that of its corresponding receiver implemented in a back-end Field-Programmable Gate Array (FPGA) are critical specifications. In this paper, we present the latency measurements and simulation of two ASICs. The measurement results indicate that both ASICs achieve their design goals and meet the latency specifications. The consistency between the simulation and measurements validates the ASIC latency characterization.

Worldwide wind/diesel hybrid power system study: Potential applications and technical issues

NASA Astrophysics Data System (ADS)

King, W. R.; Johnson, B. L., III

1991-04-01

The world market potential for wind/diesel hybrid technology is a function of the need for electric power, the availability of sufficient wind resource to support wind/diesel power, and the existence of buyers with the financial means to invest in the technology. This study includes data related to each of these three factors. This study does not address market penetration, which would require analysis of application specific wind/diesel economics. Buyer purchase criteria, which are vital to assessing market penetration, are discussed only generally. Countries were screened for a country-specific market analysis based on indicators of need and wind resource. Both developed countries and less developed countries (LDCs) were screened for wind/diesel market potential. Based on the results of the screening, ten countries showing high market potential were selected for more extensive market analyses. These analyses provide country-specific market data to guide wind/diesel technology developers in making design decisions that will lead to a competitive product. Section 4 presents the country-specific data developed for these analyses, including more extensive wind resource characterization, application-specific market opportunities, business conditions, and energy market characterizations. An attempt was made to identify the potential buyers with ability to pay for wind/diesel technology required to meet the application-specific market opportunities identified for each country. Additionally, the country-specific data are extended to corollary opportunities in countries not covered by the study. Section 2 gives recommendations for wind/diesel research based on the findings of the study.

78 FR 35260 - Multistakeholder Meeting To Develop Consumer Data Privacy Code of Conduct Concerning Mobile...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-12

... Meeting To Develop Consumer Data Privacy Code of Conduct Concerning Mobile Application Transparency AGENCY... convene a meeting of a privacy multistakeholder process concerning mobile application transparency. This..., 2013 meeting is part of a series of NTIA-convened multistakeholder discussions concerning mobile...

10 CFR 76.39 - Public meeting.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Public meeting. 76.39 Section 76.39 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.39 Public meeting. (a) A public meeting will be held on an application for renewal if the Director, in his or her...

10 CFR 76.39 - Public meeting.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Public meeting. 76.39 Section 76.39 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.39 Public meeting. (a) A public meeting will be held on an application for renewal if the Director, in his or her...

10 CFR 76.39 - Public meeting.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Public meeting. 76.39 Section 76.39 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Application § 76.39 Public meeting. (a) A public meeting will be held on an application for renewal if the Director, in his or her...

Transmission of multiplexed video signals in multimode optical fiber systems

NASA Technical Reports Server (NTRS)

White, Preston, III

1988-01-01

Kennedy Space Center has the need for economical transmission of two multiplexed video signals along multimode fiberoptic systems. These systems must span unusual distances and must meet RS-250B short-haul standards after reception. Bandwidth is a major problem and studies of the installed fibers, available LEDs and PINFETs led to the choice of 100 MHz as the upper limit for the system bandwidth. Optical multiplexing and digital transmission were deemed inappropriate. Three electrical multiplexing schemes were chosen for further study. Each of the multiplexing schemes included an FM stage to help meet the stringent S/N specification. Both FM and AM frequency division multiplexing methods were investigated theoretically and these results were validated with laboratory tests. The novel application of quadrature amplitude multiplexing was also considered. Frequency division multiplexing of two wideband FM video signal appears the most promising scheme although this application requires high power highly linear LED transmitters. Futher studies are necessary to determine if LEDs of appropriate quality exist and to better quantify performance of QAM in this application.

Charge-coupled device image sensor study

NASA Technical Reports Server (NTRS)

1973-01-01

The design specifications and predicted performance characteristics of a Charge-Coupled Device Area Imager and a Charge-Coupled Device Linear Imager are presented. The Imagers recommended are intended for use in space-borne imaging systems and therefore would meet the requirements for the intended application. A unique overlapping metal electrode structure and a buried channel structure are described. Reasons for the particular imager designs are discussed.

EDITORIAL: ECRH physics and technology in ITER

NASA Astrophysics Data System (ADS)

Luce, T. C.

2008-05-01

It is a great pleasure to introduce you to this special issue containing papers from the 4th IAEA Technical Meeting on ECRH Physics and Technology in ITER, which was held 6-8 June 2007 at the IAEA Headquarters in Vienna, Austria. The meeting was attended by more than 40 ECRH experts representing 13 countries and the IAEA. Presentations given at the meeting were placed into five separate categories EC wave physics: current understanding and extrapolation to ITER Application of EC waves to confinement and stability studies, including active control techniques for ITER Transmission systems/launchers: state of the art and ITER relevant techniques Gyrotron development towards ITER needs System integration and optimisation for ITER. It is notable that the participants took seriously the focal point of ITER, rather than simply contributing presentations on general EC physics and technology. The application of EC waves to ITER presents new challenges not faced in the current generation of experiments from both the physics and technology viewpoints. High electron temperatures and the nuclear environment have a significant impact on the application of EC waves. The needs of ITER have also strongly motivated source and launcher development. Finally, the demonstrated ability for precision control of instabilities or non-inductive current drive in addition to bulk heating to fusion burn has secured a key role for EC wave systems in ITER. All of the participants were encouraged to submit their contributions to this special issue, subject to the normal publication and technical merit standards of Nuclear Fusion. Almost half of the participants chose to do so; many of the others had been published in other publications and therefore could not be included in this special issue. The papers included here are a representative sample of the meeting. The International Advisory Committee also asked the three summary speakers from the meeting to supply brief written summaries (O. Sauter: EC wave physics and applications, M. Thumm: Source and transmission line development, and S. Cirant: ITER specific system designs). These summaries are included in this issue to give a more complete view of the technical meeting. Finally, it is appropriate to mention the future of this meeting series. With the ratification of the ITER agreement and the formation of the ITER International Organization, it was recognized that meetings conducted by outside agencies with an exclusive focus on ITER would be somewhat unusual. However, the participants at this meeting felt that the gathering of international experts with diverse specialities within EC wave physics and technology to focus on using EC waves in future fusion devices like ITER was extremely valuable. It was therefore recommended that this series of meetings continue, but with the broader focus on the application of EC waves to steady-state and burning plasma experiments including demonstration power plants. As the papers in this special issue show, the EC community is already taking seriously the challenges of applying EC waves to fusion devices with high neutron fluence and continuous operation at high reliability.

12 CFR 407.3 - Procedures applicable to regularly scheduled meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Procedures applicable to regularly scheduled meetings. 407.3 Section 407.3 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES REGULATIONS GOVERNING PUBLIC OBSERVATION OF EX-IM BANK MEETINGS § 407.3 Procedures applicable to regularly scheduled...

Laboratory evaluation of the Level TROLL 100 manufactured by In-Situ Inc.: results of pressure and temperature tests

USGS Publications Warehouse

Carnley, Mark V.; Fulford, Janice M.; Brooks, Myron H.

2013-01-01

The Level TROLL 100 manufactured by In-Situ Inc. was evaluated by the U.S. Geological Survey (USGS) Hydrologic Instrumentation Facility (HIF) for conformance to the manufacturer’s accuracy specifications for measuring pressure throughout the device’s operating temperature range. The Level TROLL 100 is a submersible, sealed, water-level sensing device with an operating pressure range equivalent to 0 to 30 feet of water over a temperature range of −20 to 50 degrees Celsius (°C). The device met the manufacturer’s stated accuracy specifications for pressure within its temperature-compensated operating range of 0 to 50 °C. The device’s accuracy specifications did not meet established USGS requirements for primary water-stage sensors used in the operation of streamgages, but the Level TROLL 100 may be suitable for other hydrologic data-collection applications. As a note, the Level TROLL 100 is not designed to meet USGS accuracy requirements. Manufacturer accuracy specifications were evaluated, and the procedures followed and the results obtained are described in this report. USGS accuracy requirements are routinely examined and reported when instruments are evaluated at the HIF.

Workshop on Advanced Technologies for Planetary Instruments, part 1

NASA Technical Reports Server (NTRS)

Appleby, John F. (Editor)

1993-01-01

This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. This volume contains papers presented at the Workshop on Advanced Technologies for Planetary Instruments on 28-30 Apr. 1993. This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. Over the past several years, SDIO has sponsored a significant technology development program aimed, in part, at the production of instruments with these characteristics. This workshop provided an opportunity for specialists from the planetary science and DoD communities to establish contacts, to explore common technical ground in an open forum, and more specifically, to discuss the applicability of SDIO's technology base to planetary science instruments.

Realizing your marketing influence, Part 1. Meeting patient needs through collaboration.

PubMed

Woods, Dana K

2002-04-01

To what degree do or should marketing and nursing overlap? If marketing is about meeting patient needs, who better than the nursing staff to inform marketing decisions? Meeting patient needs profitably ensures that patient care can continue to move toward excellence. As competition continues to intensify and reimbursement remains insufficient, using all of the healthcare system's available intellectual capital is imperative to achieving maximum competitive advantage. The author applies current marketing theory to the healthcare environment and provides practical suggestions on how nursing administrators and staff can work collaboratively with marketing colleagues to develop and implement strategic marketing programs. This is the first in a series of 3 articles, which will move readers from broad marketing strategy to specific applications. The second (June, 2002) and third articles (July/August, 2002) will focus on internal marketing and using professional certification as a marketing tool.

12 CFR 516.15 - Must I meet with OTS before I file my application?

Code of Federal Regulations, 2010 CFR

2010-01-01

... with OTS before filing your application. You must submit a draft business plan before this meeting. (2... you to submit a draft business plan or other relevant information before this meeting. (b) Contacting... pre-filing meeting or a draft business plan, the Regional Office will determine whether it will...

7 CFR 1794.52 - Scoping meetings.

Code of Federal Regulations, 2011 CFR

2011-01-01

....52 Scoping meetings. (a) Both RUS and the applicant shall have a notice published which announces a... separate notice. (b) The RUS notice shall be published in the Federal Register at least 14 days prior to the meeting(s). The applicant's notice shall be published in a newspaper at least 10 days prior to the...

Ionic liquids: solvents and sorbents in sample preparation.

PubMed

Clark, Kevin D; Emaus, Miranda N; Varona, Marcelino; Bowers, Ashley N; Anderson, Jared L

2018-01-01

The applications of ionic liquids (ILs) and IL-derived sorbents are rapidly expanding. By careful selection of the cation and anion components, the physicochemical properties of ILs can be altered to meet the requirements of specific applications. Reports of IL solvents possessing high selectivity for specific analytes are numerous and continue to motivate the development of new IL-based sample preparation methods that are faster, more selective, and environmentally benign compared to conventional organic solvents. The advantages of ILs have also been exploited in solid/polymer formats in which ordinarily nonspecific sorbents are functionalized with IL moieties in order to impart selectivity for an analyte or analyte class. Furthermore, new ILs that incorporate a paramagnetic component into the IL structure, known as magnetic ionic liquids (MILs), have emerged as useful solvents for bioanalytical applications. In this rapidly changing field, this Review focuses on the applications of ILs and IL-based sorbents in sample preparation with a special emphasis on liquid phase extraction techniques using ILs and MILs, IL-based solid-phase extraction, ILs in mass spectrometry, and biological applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Instructions for Plastic Encapsulated Microcircuit(PEM) Selection, Screening and Qualification.

NASA Technical Reports Server (NTRS)

King, Terry; Teverovsky, Alexander; Leidecker, Henning

2002-01-01

The use of Plastic Encapsulated Microcircuits (PEMs) is permitted on NASA Goddard Space Flight Center (GSFC) spaceflight applications, provided each use is thoroughly evaluated for thermal, mechanical, and radiation implications of the specific application and found to meet mission requirements. PEMs shall be selected for their functional advantage and availability, not for cost saving; the steps necessary to ensure reliability usually negate any initial apparent cost advantage. A PEM shall not be substituted for a form, fit and functional equivalent, high reliability, hermetic device in spaceflight applications. Due to the rapid change in wafer-level designs typical of commercial parts and the unknown traceability between packaging lots and wafer lots, lot specific testing is required for PEMs, unless specifically excepted by the Mission Assurance Requirements (MAR) for the project. Lot specific qualification, screening, radiation hardness assurance analysis and/or testing, shall be consistent with the required reliability level as defined in the MAR. Developers proposing to use PEMs shall address the following items in their Performance Assurance Implementation Plan: source selection (manufacturers and distributors), storage conditions for all stages of use, packing, shipping and handling, electrostatic discharge (ESD), screening and qualification testing, derating, radiation hardness assurance, test house selection and control, data collection and retention.

Laboratory and software applications for clinical trials: the global laboratory environment.

PubMed

Briscoe, Chad

2011-11-01

The Applied Pharmaceutical Software Meeting is held annually. It is sponsored by The Boston Society, a not-for-profit organization that coordinates a series of meetings within the global pharmaceutical industry. The meeting generally focuses on laboratory applications, but in recent years has expanded to include some software applications for clinical trials. The 2011 meeting emphasized the global laboratory environment. Global clinical trials generate massive amounts of data in many locations that must be centralized and processed for efficient analysis. Thus, the meeting had a strong focus on establishing networks and systems for dealing with the computer infrastructure to support such environments. In addition to the globally installed laboratory information management system, electronic laboratory notebook and other traditional laboratory applications, cloud computing is quickly becoming the answer to provide efficient, inexpensive options for managing the large volumes of data and computing power, and thus it served as a central theme for the meeting.

12 CFR 225.83 - What are the consequences of failing to continue to meet applicable capital and management...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 3 2012-01-01 2012-01-01 false What are the consequences of failing to continue to meet applicable capital and management requirements? 225.83 Section 225.83 Banks and Banking... the consequences of failing to continue to meet applicable capital and management requirements? (a...

12 CFR 225.83 - What are the consequences of failing to continue to meet applicable capital and management...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false What are the consequences of failing to continue to meet applicable capital and management requirements? 225.83 Section 225.83 Banks and Banking... the consequences of failing to continue to meet applicable capital and management requirements? (a...

78 FR 64026 - Arts Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... closed. Dates: November 14, 2013 in Room 714. 9:00 a.m. to 5:00 p.m. Eastern time. Music (application...:00 p.m. Eastern time. Music (application review): This meeting will be closed. Dates: November 19, 2013. 9:00 a.m. to 3:00 p.m. Eastern time in room 714. Music (application review): This meeting will be...

49 CFR 27.71 - Airport facilities.

Code of Federal Regulations, 2014 CFR

2014-10-01

... installed on or after December 12, 2016 meet the design specifications set forth in paragraph (k) of this... control with carriers in each location at the airport meet the design specifications in paragraph (k) of... kiosk that meets the design specifications in paragraph (k) of this section must be visually and...

Magnetorheological finishing: a perfect solution to nanofinishing requirements

NASA Astrophysics Data System (ADS)

Sidpara, Ajay

2014-09-01

Finishing of optics for different applications is the most important as well as difficult step to meet the specification of optics. Conventional grinding or other polishing processes are not able to reduce surface roughness beyond a certain limit due to high forces acting on the workpiece, embedded abrasive particles, limited control over process, etc. Magnetorheological finishing (MRF) process provides a new, efficient, and innovative way to finish optical materials as well many metals to their desired level of accuracy. This paper provides an overview of MRF process for different applications, important process parameters, requirement of magnetorheological fluid with respect to workpiece material, and some areas that need to be explored for extending the application of MRF process.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, D.A.

The hazardous waste cleanup program under the Comprehensive Environmental Response, Compensation, and Liability Act (Superfund) is delegated to the ten Regions of the US Environmental Protection Agency (EPA) and has, to date, identified more than 33,000 sites for consideration. The size and complexity of the program places great demands on those who would provide information to achieve national consistency in application of risk assessment while meeting site-specific needs for risk management and risk communication.

Using Microsoft Access XP: A How-To-Do-It Manual for Librarians. How-To-Do-It Manuals for Librarians, Number 120.

ERIC Educational Resources Information Center

Butler, E. Sonny; Napier, Timothy R.

This manual is designed to assist librarians in programming unique database applications that meet specific library needs. Chapter 1 goes over the basic functions of working with Windows, describes terms such as multitasking, and shows how to use the menu and tool bars. Chapter 2 covers the basics, defines some useful terms, and presents the steps…

An FPGA Testbed for Characterizing and Mapping DOD Applications

DTIC Science & Technology

2017-12-27

series expansion helps to linearize pitch control design for wind turbine using linear quadratic regulator (LQR) [15]. In multi-static radar system...A. Mahmud, M. A. Chowdhury, and J. Zhang, “Stability enhancement of dfig wind turbine using lqr pitch control over rated wind speed,” in 2016 IEEE...the problem of meeting payload design specifications is exacerbated by the need to identify manufacturers with interfaces that match the sensors

Detectors for Linear Colliders: Tracking and Vertexing (2/4)

ScienceCinema

Battaglia, Marco

2018-04-16

Efficient and precise determination of the flavour of partons in multi-hadron final states is essential to the anticipated LC physics program. This makes tracking in the vicinity of the interaction region of great importance. Tracking extrapolation and momentum resolution are specified by precise physics requirements. The R&D; towards detectors able to meet these specifications will be discussed, together with some of their application beyond particle physics.

Report of the Acquisition Advisory Panel to the Office of Federal Procurement Policy and the United States Congress (January 2007)

DTIC Science & Technology

2007-01-01

Business Case to Support Executive Agent Redesignation . . . . . . . . . . . . 259 Appendix B: Agency Application for Franchise Fund Pilot Program...interagency vehicles through the Depart- ment of Treasury and Department of Interior Franchise funds and the National Aeronautics and Space Administration...reauthorization of GWACs and Franchise Funds to require greater emphasis on meeting specific agency needs and furthering the overall effectiveness of

Environmental databases and other computerized information tools

NASA Technical Reports Server (NTRS)

Clark-Ingram, Marceia

1995-01-01

Increasing environmental legislation has brought about the development of many new environmental databases and software application packages to aid in the quest for environmental compliance. These databases and software packages are useful tools and applicable to a wide range of environmental areas from atmospheric modeling to materials replacement technology. The great abundance of such products and services can be very overwhelming when trying to identify the tools which best meet specific needs. This paper will discuss the types of environmental databases and software packages available. This discussion will also encompass the affected environmental areas of concern, product capabilities, and hardware requirements for product utilization.

The use of quality circles as a support tool in the taking over of practices by young general practitioners

PubMed Central

Král, Norbert; Seifert, Bohumil; Kovář, Jan; Mucha, Cyril; Vojtíšková, Jana; Bednár, Jáchym; Martin, Seifert

2018-01-01

Introduction: Although informal meetings of healthcare professionals in smaller groups are common in the area of primary care in the Czech Republic, the method of quality circles is not in wide use. The aim of our project is to use this method to help new general practitioners (GPs) when they take over a medical practice and to suggest measures to improve the organization and overall attractiveness of new practices, as well as patient satisfaction. Materials and Methods: For the purposes of this observation, an already existing informal group formed by healthcare professionals and their trainees was used. The group met a total of four times in a 6-month period. In the first meeting, problematic areas were identified. In the second, specific issues of newly starting to practice were discussed, with time to consider suggestions for improvements. The third meeting consisted of an analysis of the suggested measures and their implementation, and in the fourth, these measures and their effects were evaluated. Results: On the basis of the discussion in the first and second meetings, suggestions were made, and then, during the third meeting, structured into three dimensions: (1) The organization of work, including clinical activities, (2) the attractiveness of the practice and the satisfaction levels of the patients, (3) the satisfaction levels of the employees. In each area, specific measures were proposed. The new doctors' feedback in the fourth phase of the project was positive. The main problems the new doctors faced were related to their lack of knowledge and experience with buying or starting their own practice, as well as being an effective team leader. Conclusion: Despite the application of small groups being significantly larger, it was demonstrated that if GPs are given direction and clear goals in their meetings, these meetings can be very constructive. Small groups thus offer a good platform for young GPs in starting their own practice, giving them the capacity to do so.

12 CFR 225.83 - What are the consequences of failing to continue to meet applicable capital and management...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 3 2014-01-01 2014-01-01 false What are the consequences of failing to continue to meet applicable capital and management requirements? 225.83 Section 225.83 Banks and Banking....83 What are the consequences of failing to continue to meet applicable capital and management...

78 FR 38410 - Arts Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-26

... (application review): Room 730. This meeting will be closed. Dates: July 15, 2013; 9:00 a.m. to 5:30 p.m. Music...:30 p.m. Music (application review): Room 714. This meeting will be closed. Dates: July 16, 2013; 10...

Application of Artificial Intelligence technology to the analysis and synthesis of reliable software systems

NASA Technical Reports Server (NTRS)

Wild, Christian; Eckhardt, Dave

1987-01-01

The development of a methodology for the production of highly reliable software is one of the greatest challenges facing the computer industry. Meeting this challenge will undoubtably involve the integration of many technologies. This paper describes the use of Artificial Intelligence technologies in the automated analysis of the formal algebraic specifications of abstract data types. These technologies include symbolic execution of specifications using techniques of automated deduction and machine learning through the use of examples. On-going research into the role of knowledge representation and problem solving in the process of developing software is also discussed.

Modelling of Molecular Structures and Properties. Proceedings of the International Meeting of Physical Chemistry on Modeling of Molecular Structures and Properties in Physical Chemistry and Biophysics Organized by the Division de Chimie Physique of the Societe Francaise de Chimie Held in Nancy, France on 11-15 September 1989

DTIC Science & Technology

1990-01-01

expert systems, "intelligent" computer-aided instruction , symbolic learning . These aspects will be discussed, focusing on the specific problems the...VLSI chips) according to preliminary specifications. Finally ES are also used in computer-aided instruction (CAI) due to their ability of... instructions to process controllers), academic teaching (for mathematics , physics, foreign language, etc.). Domains of application The different

Investigation of a family of power conditioners integrated into a utility grid: final report Category I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, P.; Putkovich, R.P.

1981-07-01

A study was conducted of the requirements for and technologies applicable to power conditioning equipment in residential solar photovoltaic systems. A survey of companies known or thought to manufacture power conditioning equipment was conducted to asses the technology. Technical issues regarding ac and dc interface requirements were studied. A baseline design was selected to be a good example of existing technology which would not need significant development effort for its implementation. Alternative technologies are evaluated to determine which meet the baseline specification, and their costs and losses are evaluated. Areas in which cost improvements can be obtained are studied, andmore » the three best candidate technologies--the current-sourced converter, the HF front end converter, and the programmed wave converter--are compared. It is concluded that the designs investigated will meet, or with slight improvement could meet, short term efficiency goals. Long term efficiency goals could be met if an isolation transformer were not required in the power conditioning equipment. None of the technologies studied can meet cost goals unless further improvements are possible. (LEW)« less

75 FR 33651 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-14

... Comparative Literature and Literary Theory in Fellowships, submitted to the Division of Research Programs at... meeting will review applications for Early Modern European History in Fellowships, submitted to the.... Room: 415. Program: This meeting will review applications for Modern European History I in Fellowships...

Fabrication of three dimensional patterns of wide dimensional range using microbes and their applications

NASA Astrophysics Data System (ADS)

Mehta, Sunita; Murugeson, Saravanan; Prakash, Balaji; Deepak

2015-10-01

Inspired by the wound healing property of certain trees, we report a novel microbes based additive process for producing three dimensional patterns, which has a potential of engineering applications in a variety of fields. Imposing a two dimensional pattern of microbes on a gel media and allowing them to grow in the third dimension is known from its use in biological studies. Instead, we have introduced an intermediate porous substrate between the gel media and the microbial growth, which enables three dimensional patterns in specific forms that can be lifted off and used in engineering applications. In order to demonstrate the applicability of this idea in a diverse set of areas, two applications are selected. In one, using this method of microbial growth, we have fabricated microlenses for enhanced light extraction in organic light emitting diodes, where densely packed microlenses of the diameters of hundreds of microns lead to luminance increase by a factor of 1.24X. In another entirely different type of application, braille text patterns are prepared on a normal office paper where the grown microbial colonies serve as braille tactile dots. Braille dot patterns thus prepared meet the standard specifications (size and spacing) for braille books.

Low Average Sidelobe Slot Array Antennas for Radiometer Applications

NASA Technical Reports Server (NTRS)

Rengarajan, Sembiam; Zawardzki, Mark S.; Hodges, Richard E.

2012-01-01

In radiometer applications, it is required to design antennas that meet low average sidelobe levels and low average return loss over a specified frequency bandwidth. It is a challenge to meet such specifications over a frequency range when one uses resonant elements such as waveguide feed slots. In addition to their inherent narrow frequency band performance, the problem is exacerbated due to modeling errors and manufacturing tolerances. There was a need to develop a design methodology to solve the problem. An iterative design procedure was developed by starting with an array architecture, lattice spacing, aperture distribution, waveguide dimensions, etc. The array was designed using Elliott s technique with appropriate values of the total slot conductance in each radiating waveguide, and the total resistance in each feed waveguide. Subsequently, the array performance was analyzed by the full wave method of moments solution to the pertinent integral equations. Monte Carlo simulations were also carried out to account for amplitude and phase errors introduced for the aperture distribution due to modeling errors as well as manufacturing tolerances. If the design margins for the average sidelobe level and the average return loss were not adequate, array architecture, lattice spacing, aperture distribution, and waveguide dimensions were varied in subsequent iterations. Once the design margins were found to be adequate, the iteration was stopped and a good design was achieved. A symmetric array architecture was found to meet the design specification with adequate margin. The specifications were near 40 dB for angular regions beyond 30 degrees from broadside. Separable Taylor distribution with nbar=4 and 35 dB sidelobe specification was chosen for each principal plane. A non-separable distribution obtained by the genetic algorithm was found to have similar characteristics. The element spacing was obtained to provide the required beamwidth and close to a null in the E-plane end-fire direction. Because of the alternating slot offsets, grating lobes called butterfly lobes are produced in non-principal planes close to the H-plane. An attempt to reduce the influence of such grating lobes resulted in a symmetric design.

Modeling the Personal Health Ecosystem.

PubMed

Blobel, Bernd; Brochhausen, Mathias; Ruotsalainen, Pekka

2018-01-01

Complex ecosystems like the pHealth one combine different domains represented by a huge variety of different actors (human beings, organizations, devices, applications, components) belonging to different policy domains, coming from different disciplines, deploying different methodologies, terminologies, and ontologies, offering different levels of knowledge, skills, and experiences, acting in different scenarios and accommodating different business cases to meet the intended business objectives. For correctly modeling such systems, a system-oriented, architecture-centric, ontology-based, policy-driven approach is inevitable, thereby following established Good Modeling Best Practices. However, most of the existing standards, specifications and tools for describing, representing, implementing and managing health (information) systems reflect the advancement of information and communication technology (ICT) represented by different evolutionary levels of data modeling. The paper presents a methodology for integrating, adopting and advancing models, standards, specifications as well as implemented systems and components on the way towards the aforementioned ultimate approach, so meeting the challenge we face when transforming health systems towards ubiquitous, personalized, predictive, preventive, participative, and cognitive health and social care.

FINAL Report LTC-DOE DE-EE0000537

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gibbs, Michelle

2013-02-28

At the time of LTC’s application we were home to a small / mid-sized Wind Energy Research and Teaching Center, funded in part by We Energies, and offered the state of Wisconsin’s first Associate of Applied Science (A.A.S.) Degree in Wind Energy Technology. With President Obama promising investment in wind, LTC and its partners were uniquely situated to meet the challenge through an organized career pathways approach that utilized industry drivers and occupationally verified curriculum to train the workers who “transform our energy sector.” LTC’s employer partners validated the findings of the “20% Wind Energy by 2030: Increasing Wind Energy'smore » Contribution to U.S. Electricity Supply” report by the US Department of Energy which recognized programs like LTC’s as an “excellent beginning,” noting that many more like them are necessary to meet the challenges of the 20% Wind scenario.One of the focuses of the study was the lack of trained technicians to work on installation and maintenance of renewables (and more specifically for our grant application wind turbines). LTC’s goal, made possible with the funding provided in this grant, was to increase the number of skilled graduates to help meet this national objective. LTC was already a leader in wind for the state of Wisconsin but wanted to upscale from a single school to a statewide (and potentially regional) center for wind energy. LTC planned to leverage our facilities, curriculum, and faculty expertise to meet this goal.« less

An Evaluation of Electronic Nose for Space Program Applications

NASA Technical Reports Server (NTRS)

Young, Rebecca C.; Linnell, Bruce R.; Buttner, William J.; Mersqhelte, Barry

2003-01-01

The ability to monitor air contaminants in the Shuttle and the International Space Station is important to ensure the health and safety of astronauts. Three specific space applications have been identified that would benefit from a chemical monitor: organic contaminants in crew cabins, propellant contaminants in the airlock, and pre-combustion fire detection. NASA has assessed several commercial and developing electronic noses (e-noses) for these applications. A preliminary series of tests identified those e-noses that exhibited sufficient sensitivity to the vapors of interest. These e-noses were further tested to assess their ability to identify vapors, and in-house software has been developed to enhance identification. This paper describes the tests, the classification ability of selected e-noses, and the software improvements made to meet the requirements for these space program applications.

Development of an advanced combined iodine dispenser/detector. [for spacecraft water supplies

NASA Technical Reports Server (NTRS)

Lantz, J. B.; Jensen, F. C.; Winkler, H. E.; Schubert, F. A.

1977-01-01

Injection of iodine into water is widely used to control microbial growth. An entirely automated device for I2 injection has been developed for spacecraft application. Transfer of I2 into the water from a concentrated form is controlled electrochemically via feedback from an integrated photometric I2 level detector. All components are contained within a package weighing only 1.23 kg (2.7 lb) dry, which occupies only 1213 cu cm (74 cu in) of space, and which has the capacity to iodinate 10,900 kg (24,000 lb) of water of 5 ppm. These features exceed design specifications. The device performed satisfactorily during extended testing at variable water flow rates and temperatures. Designed to meet specifications of the Shuttle Orbiter, the device will find application in the regenerative water systems of advanced spacecraft.

12 CFR 516.190 - Will a meeting affect application processing time frames?

Code of Federal Regulations, 2010 CFR

2010-01-01

... time frames? 516.190 Section 516.190 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE... processing time frames? If OTS decides to conduct a meeting, it may suspend applicable application processing time frames, including the time frames for deeming an application complete and the applicable approval...

Proceedings of the 8th Precise Time and Time Interval (PTTI) Applications and Planning Meeting

NASA Technical Reports Server (NTRS)

1977-01-01

The Proceedings contain the papers presented at the Eight Annual Precise Time and Tme Interval PTTI Applications and Planning Meeting. The edited record of the discussions following the papers and the panel discussions are also included. This meeting provided a forum for the exchange of information on precise time and frequency technology among members of the scientific community and persons with program applications. The 282 registered attendees came from various U.S. Government agencies, private industry, universities and a number of foreign countries were represented. In this meeting, papers were presented that emphasized: (1) definitions and international regulations of precise time sources and users, (2) the scientific foundations of Hydrogen Maser standards, the current developments in this field and the application experience, and (3) how to measure the stability performance properties of precise standards. As in the previous meetings, update and new papers were presented on system applications with past, present and future requirements identified.

Variable speed gas engine-driven air compressor system

NASA Astrophysics Data System (ADS)

Morgan, J. R.; Ruggles, A. E.; Chen, T. N.; Gehret, J.

1992-11-01

Tecogen Inc. and Ingersoll-Rand Co. as a subcontractor have designed a nominal 150-hp gas engine-driven air compressor utilizing the TECODRIVE 8000 engine and the Ingersoll-Rand 178.5-mm twin screw compressor. Phase 1 included the system engineering and design, economic and applications studies, and a draft commercialization plan. Phase 2 included controls development, laboratory prototype construction, and performance testing. The testing conducted verified that the compressor meets all design specifications.

Application of Electronic Meeting Systems to Military Organizations

DTIC Science & Technology

1989-06-21

June 1989. Bibliography 24. Gray, P., Vogel, D.R., Beauclair , R. "A Typology for Group Decision Support System Research," European Journal of Operations...3, 1984. 7. Beauclair , R.A., "An Experimental Study of the Effects of Specific GDSS Applica- tions on Small Group Decision Making," University of...Vogel, D.R., Beauclair , R. "A Typology for Group Decision Support System Research," European Journal of Operations Research, forthcoming 60. Grohowski

Application of Nano-Scale Precipitate Engineering of TiN-NbC Composite in 32mm K60-E2 Grade Plate Rolling

NASA Astrophysics Data System (ADS)

Subramanian, S. V.; Xiaoping, Ma; Wenjin, Nie; Xiaobing, Zhang

A cost effective alloy design based on niobium microalloying was developed by Shagang for the production of 32 mm gage K60-E2 steel plate for manufacturing LSAW pipes of 1422 mm diameter. Two metallurgical challenges are (i) to meet enhanced CTOD toughness and (ii) to ensure consistent DWTT performance in accordance with the specification laid out by Gazprom Vniigaz.

An environmental decision framework applied to marine engine control technologies.

PubMed

Corbett, James J; Chapman, David

2006-06-01

This paper develops a decision framework for considering emission control technologies on marine engines, informed by standard decision theory, with an open structure that may be adapted by operators with specific vessel and technology attributes different from those provided here. Attributes relate objectives important to choosing control technologies with specific alternatives that may meet several of the objectives differently. The transparent framework enables multiple stakeholders to understand how different subjective judgments and varying attribute properties may result in different technology choices. Standard scoring techniques ensure that attributes are not biased by subjective scoring and that weights are the primary quantitative input where subjective preferences are exercised. An expected value decision structure is adopted that considers probabilities (likelihood) that a given alternative can meet its claims; alternative decision criteria are discussed. Capital and annual costs are combined using a net present value approach. An iterative approach is advocated that allows for screening and disqualifying alternatives that do not meet minimum conditions for acceptance, such as engine warranty or U.S. Coast Guard requirements. This decision framework assists vessel operators in considering explicitly important attributes and in representing choices clearly to other stakeholders concerned about reducing air pollution from vessels. This general decision structure may also be applied similarly to other environmental controls in marine applications.

Predictable and SuStainable Implementation of National Cardiovascular Registries (PASSION) infrastructure: A think tank report from Medical Device Epidemiological Network Initiative (MDEpiNet).

PubMed

Zeitler, Emily P; Al-Khatib, Sana M; Drozda, Joseph P; Kessler, Larry G; Kirtane, Ajay J; Kong, David F; Laschinger, John; Marinac-Dabic, Danica; Morice, Marie-Claude; Reed, Terrie; Sedrakyan, Art; Stein, Kenneth M; Tcheng, James; Krucoff, Mitchell W

2016-01-01

The MDEpiNet is a public-private partnership between the US Food and Drug Administration's Center for Devices and Radiological Health and participating partners. The PASSION program is an MDEpiNet-sponsored program that aims to demonstrate the goals of MDEpiNet by using cardiovascular medical device registries to bridge evidence gaps across the medical device total product life cycle. To this end, a PASSION Think Tank meeting took place in October 2014 in Silver Spring, MD, to facilitate discussion between stakeholders about the successes, challenges, and future novel applications of medical device registries, with particular emphasis on identifying pilot projects. Participants spanned a broad range of groups including patients, device manufacturers, regulators, physicians/academicians, professional societies, providers, and payers. The meeting focus included 4 areas of cardiovascular medicine intended to cultivate interest in 4 MDEpiNet disease-specific/device-specific working groups: coronary intervention, electrophysiology, valvular disease, and peripheral vascular disease. In addition, more general issues applying to registry-based infrastructure and analytical methodologies for assessing device benefit/risk were considered to provide context for the working groups as PASSION programs going forward. This article summarizes the discussions at the meeting and the future directions of the PASSION program. Copyright © 2015 Elsevier Inc. All rights reserved.

Preliminary design of a solar central receiver for site-specific repowering application (Saguaro Power Plant). Volume II. Preliminary design. Final report, October 1982-September 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, E.R.

1983-09-01

The solar central receiver technology, site, and specific unit for repowering were selected in prior analyses and studies. The objectives of this preliminary design study were to: develop a solar central receiver repowering design for Saguaro that (1) has potential to be economically competitive with fossil fueled plants in near and long term applications, (2) has the greatest chance for completion without further government funding, (3) will further define technical and economic feasibility of a 66 MWe gross size plant that is adequate to meet the requirements for utility and industrial process heat applications, (4) can potentially be constructed andmore » operated within the next five years, and (5) incorporates solar central receiver technology and represents state-of-the-art development. This volume on the preliminary design includes the following sections: executive summary; introduction; changes from advanced conceptual design; preliminary design; system characteristics; economic analysis; and development plan.« less

Evolving Applications, Technological Challenges and Future Opportunities in Neuromodulation: Proceedings of the Fifth Annual Deep Brain Stimulation Think Tank

PubMed Central

Ramirez-Zamora, Adolfo; Giordano, James J.; Gunduz, Aysegul; Brown, Peter; Sanchez, Justin C.; Foote, Kelly D.; Almeida, Leonardo; Starr, Philip A.; Bronte-Stewart, Helen M.; Hu, Wei; McIntyre, Cameron; Goodman, Wayne; Kumsa, Doe; Grill, Warren M.; Walker, Harrison C.; Johnson, Matthew D.; Vitek, Jerrold L.; Greene, David; Rizzuto, Daniel S.; Song, Dong; Berger, Theodore W.; Hampson, Robert E.; Deadwyler, Sam A.; Hochberg, Leigh R.; Schiff, Nicholas D.; Stypulkowski, Paul; Worrell, Greg; Tiruvadi, Vineet; Mayberg, Helen S.; Jimenez-Shahed, Joohi; Nanda, Pranav; Sheth, Sameer A.; Gross, Robert E.; Lempka, Scott F.; Li, Luming; Deeb, Wissam; Okun, Michael S.

2018-01-01

The annual Deep Brain Stimulation (DBS) Think Tank provides a focal opportunity for a multidisciplinary ensemble of experts in the field of neuromodulation to discuss advancements and forthcoming opportunities and challenges in the field. The proceedings of the fifth Think Tank summarize progress in neuromodulation neurotechnology and techniques for the treatment of a range of neuropsychiatric conditions including Parkinson's disease, dystonia, essential tremor, Tourette syndrome, obsessive compulsive disorder, epilepsy and cognitive, and motor disorders. Each section of this overview of the meeting provides insight to the critical elements of discussion, current challenges, and identified future directions of scientific and technological development and application. The report addresses key issues in developing, and emphasizes major innovations that have occurred during the past year. Specifically, this year's meeting focused on technical developments in DBS, design considerations for DBS electrodes, improved sensors, neuronal signal processing, advancements in development and uses of responsive DBS (closed-loop systems), updates on National Institutes of Health and DARPA DBS programs of the BRAIN initiative, and neuroethical and policy issues arising in and from DBS research and applications in practice. PMID:29416498

Evolving Applications, Technological Challenges and Future Opportunities in Neuromodulation: Proceedings of the Fifth Annual Deep Brain Stimulation Think Tank.

PubMed

Ramirez-Zamora, Adolfo; Giordano, James J; Gunduz, Aysegul; Brown, Peter; Sanchez, Justin C; Foote, Kelly D; Almeida, Leonardo; Starr, Philip A; Bronte-Stewart, Helen M; Hu, Wei; McIntyre, Cameron; Goodman, Wayne; Kumsa, Doe; Grill, Warren M; Walker, Harrison C; Johnson, Matthew D; Vitek, Jerrold L; Greene, David; Rizzuto, Daniel S; Song, Dong; Berger, Theodore W; Hampson, Robert E; Deadwyler, Sam A; Hochberg, Leigh R; Schiff, Nicholas D; Stypulkowski, Paul; Worrell, Greg; Tiruvadi, Vineet; Mayberg, Helen S; Jimenez-Shahed, Joohi; Nanda, Pranav; Sheth, Sameer A; Gross, Robert E; Lempka, Scott F; Li, Luming; Deeb, Wissam; Okun, Michael S

2017-01-01

The annual Deep Brain Stimulation (DBS) Think Tank provides a focal opportunity for a multidisciplinary ensemble of experts in the field of neuromodulation to discuss advancements and forthcoming opportunities and challenges in the field. The proceedings of the fifth Think Tank summarize progress in neuromodulation neurotechnology and techniques for the treatment of a range of neuropsychiatric conditions including Parkinson's disease, dystonia, essential tremor, Tourette syndrome, obsessive compulsive disorder, epilepsy and cognitive, and motor disorders. Each section of this overview of the meeting provides insight to the critical elements of discussion, current challenges, and identified future directions of scientific and technological development and application. The report addresses key issues in developing, and emphasizes major innovations that have occurred during the past year. Specifically, this year's meeting focused on technical developments in DBS, design considerations for DBS electrodes, improved sensors, neuronal signal processing, advancements in development and uses of responsive DBS (closed-loop systems), updates on National Institutes of Health and DARPA DBS programs of the BRAIN initiative, and neuroethical and policy issues arising in and from DBS research and applications in practice.

The role of optical sensors in environmental applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coulter, S.L.; Klainer, S.M.; Saini, D.

1995-12-31

With the ever increasing regulations and public consciousness on pollution control there is an increasing demand for effective monitors for field use. The specifications for an effective field monitor are that it be an in situ sensor which presents real time data; that data are received without sampling or testing artifacts; and, that there is a low cost associated with running multiple tests. Fiber optic chemical sensors have been designed by FCI Environmental, Inc. which meet these specifications for the detection of hydrocarbons in air, water or soil. Recent developments at FCI Environmental in the field of optic chemical sensorsmore » include the development of a chip level waveguide sensor. With the improvements in the size and function of the sensor, which impacts the manufacturability and cost of the sensors, this new technology presents new opportunities in the fields of in situ monitoring. Current activities in the development of this technology and applications of specific solid-state immunoassay are discussed.« less

Engineering Software Suite Validates System Design

NASA Technical Reports Server (NTRS)

2007-01-01

EDAptive Computing Inc.'s (ECI) EDAstar engineering software tool suite, created to capture and validate system design requirements, was significantly funded by NASA's Ames Research Center through five Small Business Innovation Research (SBIR) contracts. These programs specifically developed Syscape, used to capture executable specifications of multi-disciplinary systems, and VectorGen, used to automatically generate tests to ensure system implementations meet specifications. According to the company, the VectorGen tests considerably reduce the time and effort required to validate implementation of components, thereby ensuring their safe and reliable operation. EDASHIELD, an additional product offering from ECI, can be used to diagnose, predict, and correct errors after a system has been deployed using EDASTAR -created models. Initial commercialization for EDASTAR included application by a large prime contractor in a military setting, and customers include various branches within the U.S. Department of Defense, industry giants like the Lockheed Martin Corporation, Science Applications International Corporation, and Ball Aerospace and Technologies Corporation, as well as NASA's Langley and Glenn Research Centers

Intelligent Assistive Technology Applications to Dementia Care: Current Capabilities, Limitations, and Future Challenges

PubMed Central

Bharucha, Ashok J.; Anand, Vivek; Forlizzi, Jodi; Dew, Mary Amanda; Reynolds, Charles F.; Stevens, Scott; Wactlar, Howard

2009-01-01

The number of older Americans afflicted by Alzheimer disease and related dementias will triple to 13 million persons by 2050, thus greatly increasing healthcare needs. An approach to this emerging crisis is the development and deployment of intelligent assistive technologies that compensate for the specific physical and cognitive deficits of older adults with dementia, and thereby also reduce caregiver burden. The authors conducted an extensive search of the computer science, engineering, and medical databases to review intelligent cognitive devices, physiologic and environmental sensors, and advanced integrated sensor networks that may find future applications in dementia care. Review of the extant literature reveals an overwhelming focus on the physical disability of younger persons with typically nonprogressive anoxic and traumatic brain injuries, with few clinical studies specifically involving persons with dementia. A discussion of the specific capabilities, strengths, and limitations of each technology is followed by an overview of research methodological challenges that must be addressed to achieve measurable progress to meet the healthcare needs of an aging America. PMID:18849532

Strategies of bringing drug product marketing applications to meet current regulatory standards.

PubMed

Wu, Yan; Freed, Anita; Lavrich, David; Raghavachari, Ramesh; Huynh-Ba, Kim; Shah, Ketan; Alasandro, Mark

2015-08-01

In the past decade, many guidance documents have been issued through collaboration of global organizations and regulatory authorities. Most of these are applicable to new products, but there is a risk that currently marketed products will not meet the new compliance standards during audits and inspections while companies continue to make changes through the product life cycle for continuous improvement or market demands. This discussion presents different strategies to bringing drug product marketing applications to meet current and emerging standards. It also discusses stability and method designs to meet process validation and global development efforts.

77 FR 41387 - Applications for New Awards; Rehabilitation Research and Training Center on Vocational...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

... Center (RRTCs) on Vocational Rehabilitation (VR) and Developing Strategies to Meet Employer Needs in... Vocational Rehabilitation (VR) and Developing Strategies to Meet Employer Needs in Changing Economic... application for the RRTC on VR and Developing Strategies to Meet Employer Needs in Changing Economic...

Design guidelines for use of adhesives in hybrid microcircuits. [for electronic equipment in space applications

NASA Technical Reports Server (NTRS)

Caruso, S. V.; Perkins, K. L.; Licari, J. J.

1973-01-01

Although it is generally accepted that the use of adhesives in the assembly of hybrid microcircuits offers advantages over other bonding methods, there currently does not exist a set of guidelines for the selection of adhesives which will insure that hybrid microcircuits assembled with them will meet the long use-life, high-reliability requirements of electronic equipment for space applications. This study was directed to the identification of the properties of electrically insulative adhesives that potentially could cause problems in such an application, and to the development of evaluation tests to quantify these properties and thus form the basis for establishing suitable guidelines and, ultimately, specifications. Bond strength, outgassing after cure, and corrosivity were selected for detailed attention since they are considered to be especially critical. Introductory discussion includes enumeration and brief comments on the properties of adhesives considered to be important for the proposed application, a general review of polymeric types of adhesives, and identification of the major types of adhesives commercially available and specifically designed for microelectronic use. The specific tests developed to evaluate bond strength, outgassing after cure, and corrosivity are discussed in detail, and comparative results obtained for selected adhesives representative of the major types are given.

Laser applications to chemical analysis: an introduction by the feature editors

NASA Astrophysics Data System (ADS)

Jeffries, Jay B.; Ramsey, J. Michael; Lucht, Robert P.

1995-06-01

This issue of Applied Optics features papers on the application of laser technology to chemical analysis. Many of the contributions, although not all, result from papers presented at the Fourth OSA Topical Meeting on Laser Applications to Chemical Analysis, which was held at Jackson Hole, Wyoming, March, 1994. This successful meeting, with nearly one hundred participants, continued the tradition of earlier LACA meetings to focus on the optical science of laser-based measurements of temperature and trace chemical assays in a wide variety of practical applications.

The future of medical diagnostics: review paper

PubMed Central

2011-01-01

While histopathology of excised tissue remains the gold standard for diagnosis, several new, non-invasive diagnostic techniques are being developed. They rely on physical and biochemical changes that precede and mirror malignant change within tissue. The basic principle involves simple optical techniques of tissue interrogation. Their accuracy, expressed as sensitivity and specificity, are reported in a number of studies suggests that they have a potential for cost effective, real-time, in situ diagnosis. We review the Third Scientific Meeting of the Head and Neck Optical Diagnostics Society held in Congress Innsbruck, Innsbruck, Austria on the 11th May 2011. For the first time the HNODS Annual Scientific Meeting was held in association with the International Photodynamic Association (IPA) and the European Platform for Photodynamic Medicine (EPPM). The aim was to enhance the interdisciplinary aspects of optical diagnostics and other photodynamic applications. The meeting included 2 sections: oral communication sessions running in parallel to the IPA programme and poster presentation sessions combined with the IPA and EPPM posters sessions. PMID:21861912

Genome Writing: Current Progress and Related Applications.

PubMed

Wang, Yueqiang; Shen, Yue; Gu, Ying; Zhu, Shida; Yin, Ye

2018-02-01

The ultimate goal of synthetic biology is to build customized cells or organisms to meet specific industrial or medical needs. The most important part of the customized cell is a synthetic genome. Advanced genomic writing technologies are required to build such an artificial genome. Recently, the partially-completed synthetic yeast genome project represents a milestone in this field. In this mini review, we briefly introduce the techniques for de novo genome synthesis and genome editing. Furthermore, we summarize recent research progresses and highlight several applications in the synthetic genome field. Finally, we discuss current challenges and future prospects. Copyright © 2018. Production and hosting by Elsevier B.V.

Feasibility of magnetic bearings for advanced gas turbine engines

NASA Technical Reports Server (NTRS)

Hibner, David; Rosado, Lewis

1992-01-01

The application of active magnetic bearings to advanced gas turbine engines will provide a product with major improvements compared to current oil lubricated bearing designs. A rethinking of the engine rotating and static structure design is necessary and will provide the designer with significantly more freedom to meet the demanding goals of improved performance, increased durability, higher reliability, and increased thrust to weight ratio via engine weight reduction. The product specific technology necessary for this high speed, high temperature, dynamically complex application has been defined. The resulting benefits from this approach to aircraft engine rotor support and the complementary engine changes and improvements have been assessed.

The need for artificial intelligence as an aid in controlling a manufacturing operation

NASA Astrophysics Data System (ADS)

Weyand, J.

AI applications to industrial production and planning are discussed and illustrated with diagrams and drawings. Applications examined include flexible automation of manufacturing processes (robots with open manual control, robots programmable to meet product specifications, self-regulated robots, and robots capable of learning), flexible fault detection and diagnostics, production control, and overall planning and management (product strategies, marketing, determination of development capacity, site selection, project organization, and technology investment strategies). For the case of robots, problems in the design and operation of a state-of-the-art machine-tool cell (for hole boring, milling, and joining) are analyzed in detail.

Application of the VALUE communication principles in ACTIVE hospice team meetings.

PubMed

Washington, Karla T; Wittenberg-Lyles, Elaine; Parker Oliver, Debra; Demiris, George; Shaunfield, Sara; Crumb, Edith

2013-01-01

The ACTIVE (Assessing Caregivers for Team Intervention through Video Encounters) intervention uses technology to enable family caregivers to participate in hospice interdisciplinary team (IDT) meetings from geographically remote locations. Previous research has suggested that effective communication is critical to the success of these meetings. The purpose of this study was to explore communication in ACTIVE IDT meetings involving family caregivers and to assess the degree to which hospice teams use specific communication principles (summarized in the mnemonic VALUE: value, acknowledge, listen, understand, and elicit), which have been supported in previous research in intensive care settings. Researchers analyzed team-family communication during 84 video- and/or audio-recorded care plan discussions that took place during ACTIVE team meetings, using a template approach to text analysis to determine the extent and quality of VALUE principles. The total content analyzed was 9 hours, 28 minutes in length. Hospice clinicians routinely employed the VALUE communication principles in communication during ACTIVE IDT meetings with family caregivers, but the quality of this communication was frequently rated moderate or poor. The majority of such communication was task-focused. Less often, communication centered on emotional concerns and efforts to gain a more holistic understanding of patients and families. This analysis suggests an opportunity for improving support for family members during ACTIVE IDT meetings. Members of hospice IDTs should remain aware of the opportunity for additional attention to the emotional realities of the hospice experience for family caregivers and could improve support for family caregivers during IDT meetings by ensuring that messages used to exemplify VALUE principles during team-family communication are of a high quality.

78 FR 63172 - Environmental Management Site-Specific Advisory Board, Paducah; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

Lessons Learned Using COTS Electronics for the International Space Station Radiation Environment

NASA Technical Reports Server (NTRS)

Blumer, John H.; Roth, A. (Technical Monitor)

2001-01-01

The mantra of 'Faster, Better, Cheaper' has to a large degree been interpreted as using Commercial Off-the-Shelf (COTS) components and/or circuit boards. One of the first space applications to actually use COTS in space along with radiation performance requirements was the Expedite the Processing of Experiments to Space Station (EXPRESS) Rack program, for the International Space Station (ISS). In order to meet the performance, cost and schedule targets, military grade Versa Module Eurocard (VME) was selected as the baseline design for the main computer, the Rack Interface Controller (RIC). VME was chosen as the computer backplane because of the large variety of military grade boards available, which were designed to meet the military environmental specifications (thermal, shock, vibration, etc.). These boards also have a paper pedigree in regards to components. Since these boards exceeded most ISS environmental requirements, it was reasoned using COTS mid-grade VME boards, as opposed to designing custom boards could save significant time and money. It was recognized up front the radiation environment of ISS, while benign compared to many space flight applications, would be the main challenge to using COTS. Thus in addition to selecting vendors on how well their boards met the usual performance and environmental specifications, the board's parts lists were reviewed on how well they would perform in the ISS radiation environment. However, issues with verifying that the available radiation test data was applicable to the actual part used, vendor part design changes and the fact most parts did not have valid test data soon complicated board and part selection in regards to radiation.

Get a job

NASA Astrophysics Data System (ADS)

Carlowicz, Michael

At AGU's 1996 Fall Meeting, a record number of jobs were advertised through the AGU Job Center. Approximately 150 employers advertised 164 jobs at the meeting in San Francisco, while 302 applicants used the center's services and about 50 sat for on-site interviews. At the 1995 Fall Meeting, the Job Center attracted 87 employers and 230 applicants.

78 FR 71555 - Medicare Program; Town Hall Meeting on FY 2015 Applications for New Medical Services and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-29

... FY 2015 new medical services and technologies applications meet the substantial clinical improvement... new medical services and technologies under Medicare. Effective for discharges beginning on or after... specifies that a medical service or technology will be considered ``new'' if it meets criteria established...

The Item-Specific Deficit Approach to evaluating verbal memory dysfunction: rationale, psychometrics, and application.

PubMed

Wright, Matthew J; Woo, Ellen; Schmitter-Edgecombe, Maureen; Hinkin, Charles H; Miller, Eric N; Gooding, Amanda L

2009-10-01

In the current study, we introduce the Item-Specific Deficit Approach (ISDA), a novel method for characterizing memory process deficits in list-learning data. To meet this objective, we applied the ISDA to California Verbal Learning Test (CVLT) data collected from a sample of 132 participants (53 healthy participants and 79 neurologically compromised participants). Overall, the ISDA indices measuring encoding, consolidation, and retrieval deficits demonstrated advantages over some traditional indices and indicated acceptable reliability and validity. Currently, the ISDA is intended for experimental use, although further research may support its utility for characterizing memory impairments in clinical assessments.

Barriers to the utilization of synthetic fuels for transportation

NASA Technical Reports Server (NTRS)

Parker, H. W.; Reilly, M. J.

1981-01-01

The principal types of engines for transportation uses are reviewed and the specifications for conventional fuels are compared with specifications for synthetic fuels. Synfuel processes nearing the commercialization phase are reviewed. The barriers to using synfuels can be classified into four groups: technical, such as the uncertainty that a new engine design can satisfy the desired performance criteria; environmental, such as the risk that the engine emissions cannot meet the applicable environmental standards; economic, including the cost of using a synfuel relative to conventional transportation fuels; and market, involving market penetration by offering new engines, establishing new distribution systems and/or changing user expectations.

18 CFR 5.11 - Potential Applicant's proposed study plan and study plan meetings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... proposed study plan and study plan meetings. 5.11 Section 5.11 Conservation of Power and Water Resources... INTEGRATED LICENSE APPLICATION PROCESS § 5.11 Potential Applicant's proposed study plan and study plan..., including information and study requests, the potential applicant must file with the Commission a proposed...

18 CFR 5.11 - Potential Applicant's proposed study plan and study plan meetings.

Code of Federal Regulations, 2011 CFR

2011-04-01

... proposed study plan and study plan meetings. 5.11 Section 5.11 Conservation of Power and Water Resources... INTEGRATED LICENSE APPLICATION PROCESS § 5.11 Potential Applicant's proposed study plan and study plan..., including information and study requests, the potential applicant must file with the Commission a proposed...

The Affordance Template ROS Package for Robot Task Programming

NASA Technical Reports Server (NTRS)

Hart, Stephen; Dinh, Paul; Hambuchen, Kimberly

2015-01-01

This paper introduces the Affordance Template ROS package for quickly programming, adjusting, and executing robot applications in the ROS RViz environment. This package extends the capabilities of RViz interactive markers by allowing an operator to specify multiple end-effector waypoint locations and grasp poses in object-centric coordinate frames and to adjust these waypoints in order to meet the run-time demands of the task (specifically, object scale and location). The Affordance Template package stores task specifications in a robot-agnostic XML description format such that it is trivial to apply a template to a new robot. As such, the Affordance Template package provides a robot-generic ROS tool appropriate for building semi-autonomous, manipulation-based applications. Affordance Templates were developed by the NASA-JSC DARPA Robotics Challenge (DRC) team and have since successfully been deployed on multiple platforms including the NASA Valkyrie and Robonaut 2 humanoids, the University of Texas Dreamer robot and the Willow Garage PR2. In this paper, the specification and implementation of the affordance template package is introduced and demonstrated through examples for wheel (valve) turning, pick-and-place, and drill grasping, evincing its utility and flexibility for a wide variety of robot applications.

Successfully Implementing Net-Zero Energy Policy through the Air Force Military Construction Program

DTIC Science & Technology

2013-03-01

Meets Does not meet Does not meet Meets Renewable Farms Meets Meets Meets Meets On-Site (Distributed Generation) Meets* Meets* Meets Meets...independence, nor does it allow for net-zero energy installations. Developing centralized renewable energy farms is another method for obtaining...combination of centralized renewable energy farms and distributed generation methods. The specific combination of methods an installation will utilize

caBIG compatibility review system: software to support the evaluation of applications using defined interoperability criteria.

PubMed

Freimuth, Robert R; Schauer, Michael W; Lodha, Preeti; Govindrao, Poornima; Nagarajan, Rakesh; Chute, Christopher G

2008-11-06

The caBIG Compatibility Review System (CRS) is a web-based application to support compatibility reviews, which certify that software applications that pass the review meet a specific set of criteria that allow them to interoperate. The CRS contains workflows that support both semantic and syntactic reviews, which are performed by the caBIG Vocabularies and Common Data Elements (VCDE) and Architecture workspaces, respectively. The CRS increases the efficiency of compatibility reviews by reducing administrative overhead and it improves uniformity by ensuring that each review is conducted according to a standard process. The CRS provides metrics that allow the review team to evaluate the level of data element reuse in an application, a first step towards quantifying the extent of harmonization between applications. Finally, functionality is being added that will provide automated validation of checklist criteria, which will further simplify the review process.

Life and Biomedical Sciences and Applications Advisory Subcommittee Meeting

NASA Technical Reports Server (NTRS)

1996-01-01

The proceedings of the August 1995 meeting of the Life and Biomedical Sciences and Applications Advisory Subcommittee (LBSAAS) are summarized. The following topics were addressed by the Subcommittee members: the activities and status of the LBSA Division; program activities of the Office of Life and Microgravity Sciences and Applications (OLMSA); the medical Countermeasures Program; and the Fettman Report on animal research activities at ARC. Also presented were a history and overview of the activities of the Space Station Utilization Advisory Committee and the Advanced Life Support Program (ALSP). The meeting agenda and a list of the Subcommittee members and meeting attendees are included as appendices.

Proceedings of the Fourth Precise Time and Time Interval Planning Meeting

NASA Technical Reports Server (NTRS)

Acrivos, H. N. (Compiler); Wardrip, S. C. (Compiler)

1972-01-01

The proceedings of a conference on Precise Time and Time Interval Planning are presented. The subjects discussed include the following: (1) satellite timing techniques, precision frequency sources, and very long baseline interferometry, (2) frequency stabilities and communications, and (3) very low frequency and ultrahigh frequency propagation and use. Emphasis is placed on the accuracy of time discrimination obtained with time measuring equipment and specific applications of time measurement to military operations and civilian research projects.

Evaluation of ERDA-sponsored coal feed system development

NASA Technical Reports Server (NTRS)

Phen, R. L.; Luckow, W. K.; Mattson, L.; Otth, D.; Tsou, P.

1977-01-01

Coal feeders were evaluated based upon criteria such as technical feasibility, performance (i.e. ability to meet process requirements), projected life cycle costs, and projected development cost. An initial set of feeders was selected based on the feeders' cost savings potential compared with baseline lockhopper systems. Additional feeders were considered for selection based on: (1) increasing the probability of successful feeder development; (2) application to specific processes; and (3) technical merit. A coal feeder development program is outlined.

2002 Computing and Interdisciplinary Systems Office Review and Planning Meeting

NASA Technical Reports Server (NTRS)

Lytle, John; Follen, Gregory; Lopez, Isaac; Veres, Joseph; Lavelle, Thomas; Sehra, Arun; Freeh, Josh; Hah, Chunill

2003-01-01

The technologies necessary to enable detailed numerical simulations of complete propulsion systems are being developed at the NASA Glenn Research Center in cooperation with NASA Glenn s Propulsion program, NASA Ames, industry, academia and other government agencies. Large scale, detailed simulations will be of great value to the nation because they eliminate some of the costly testing required to develop and certify advanced propulsion systems. In addition, time and cost savings will be achieved by enabling design details to be evaluated early in the development process before a commitment is made to a specific design. This year s review meeting describes the current status of the NPSS and the Object Oriented Development Kit with specific emphasis on the progress made over the past year on air breathing propulsion applications for aeronautics and space transportation applications. Major accomplishments include the first 3-D simulation of the primary flow path of a large turbofan engine in less than 15 hours, and the formal release of the NPSS Version 1.5 that includes elements of rocket engine systems and a visual based syntax layer. NPSS and the Development Kit are managed by the Computing and Interdisciplinary Systems Office (CISO) at the NASA Glenn Research Center and financially supported in fiscal year 2002 by the Computing, Networking and Information Systems (CNIS) project managed at NASA Ames, the Glenn Aerospace Propulsion and Power Program and the Advanced Space Transportation Program.

Transforming drug discovery and development through innovation: past, present and future.

PubMed

Needham, Shane; Premkumar, Noel; Pols, Joanna; Lee, Mike

2013-02-01

This annual meeting began in 1998 and was the first industry-led event to focus on the specific needs of industry researchers. The goal of Clinical and Pharmaceutical Solutions Through Analysis (CPSA) is to provide an in-depth review of innovative technology and industry practices through open discussion of industry-related issues and needs. Education and specialized training are the foundation of all CPSA events. As the industry has evolved so has CPSA. Thus, the year the name was changed from Chemical and Pharmaceutical Structural Analysis to CPSA was to reflect the growing focus on clinical applications and the emergence of personalized medicine. Most importantly, the CPSA annual meeting has retained the same high-quality scientific content, open interaction from industry opinion leaders and a collegial environment.

78 FR 63171 - Environmental Management Site-Specific Advisory Board, Northern New Mexico; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Northern New Mexico. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

76 FR 42684 - Pacific Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-19

... project team working meeting is to consider the scope of action for the 2013-14 harvest specifications and... groundfish project team responsible for drafting and analyzing the 2013-14 harvest specification and management measures for the Pacific Fishery Management Council (Council) will hold a working meeting, which...

Going off Script: Structure and Agency in Individualized Education Program Meetings

ERIC Educational Resources Information Center

Bray, Laura E.; Russell, Jennifer Lin

2016-01-01

In this comparative case study, we draw from neoinstitutional and structuration theory to examine the individualized education program (IEP) meetings for five high school students identified with specific learning disabilities. Specifically, we examine how participants interacted during the IEP meetings and how learning, instruction, and…

The OECD expert meeting on ecotoxicology and environmental fate--towards the development of improved OECD guidelines for the testing of nanomaterials.

PubMed

Kühnel, Dana; Nickel, Carmen

2014-02-15

On behalf of the OECD Working Party on Manufactured Nanomaterials (WPMN) an expert meeting on ecotoxicology and environmental fate of nanomaterials (NMs) took place in January 2013 in Berlin. At this meeting experts from science, industry and regulatory bodies discussed the applicability of OECD test guidelines (TGs) for chemicals to nanomaterials. The objective was to discuss the current state of the relevant science and provide recommendations to the OECD WPMN on (1) the need for updating current OECD TGs and the need for developing new ones specific to nanomaterials; and (2) guidance needed for the appropriate and valid testing of environmental fate and ecotoxicity endpoints for NMs. Experts at the workshop agreed that the majority of the OECD TG for chemicals were generally applicable for the testing of NM, with the exception of TG 105 (water solubility) and 106 (adsorption-desorption). Additionally, the workshop also highlighted considerations when conducting OECD chemical TG on nanomaterials (e.g., sample preparation, dispersion, analysis, dosimetry and characterisation). These considerations will lead to the future development of proposals for new TG and guidance documents (GDs) to ensure that OECD TG give meaningful, repeatable, and accurate results when used for nanomaterials. This report provides a short overview of topics discussed during the meeting and the main outcomes. A more detailed report of the workshop will become available through the OECD, however, due to the urgency of having OECD TG relevant for nanomaterials, this brief report is being shared with the scientific community through this communication. Copyright © 2013. Published by Elsevier B.V.

Meeting report from the Prostate Cancer Foundation PSMA-directed radionuclide scientific working group.

PubMed

Miyahira, Andrea K; Pienta, Kenneth J; Morris, Michael J; Bander, Neil H; Baum, Richard P; Fendler, Wolfgang P; Goeckeler, William; Gorin, Michael A; Hennekes, Hartwig; Pomper, Martin G; Sartor, Oliver; Tagawa, Scott T; Williams, Scott; Soule, Howard R

2018-05-01

The Prostate Cancer Foundation (PCF) convened a PSMA-Directed Radionuclide Scientific Working Group on November 14, 2017, at Weill Cornell Medicine, New York, NY. The meeting was attended by 35 global investigators with expertise in prostate cancer biology, radionuclide therapy, molecular imaging, prostate-specific membrane antigen (PSMA)-targeted agents, drug development, and prostate cancer clinical trials. The goal of this meeting was to discuss the potential for using PSMA-targeted radionuclide agents for the treatment of advanced prostate cancer and to define the studies and clinical trials necessary for validating and optimizing the use of these agents. Several major topic areas were discussed including the overview of PSMA biology, lessons and applications of PSMA-targeted PET imaging, the nuances of designing PSMA-targeted radionuclide agents, clinical experiences with PSMA-targeted radionuclides, PCF-funded projects to accelerate PSMA-targeted radionuclide therapy, and barriers to the use of radionuclide treatments in widespread clinical practice. This article reviews the major topics discussed at the meeting with the goal of promoting research that will validate and optimize the use of PSMA-targeted radionuclide therapies for the treatment of advanced prostate cancer. © 2018 Wiley Periodicals, Inc.

PREFACE: FLUIDOS 2010: XI Meeting on Recent Advances in the Physics of Fluids and their Applications

NASA Astrophysics Data System (ADS)

Bove, Italo; Cabeza, Cecilia; Martí, Arturo C.; Sarasúa, Gustavo

2011-04-01

The papers published in this volume of the Journal of Physics: Conference Series were selected from the manuscripts submitted to the XI Meeting on Recent Advances in the Physics of Fluids and their Applications (FLUIDOS2010), which was held in Colonia del Sacramento, Uruguay, 3-5 November 2010. FLUIDOS takes place every two years, usually in November, with the aim of gathering together researchers from all areas of the Physics of Fluids, to update themselves on the latest technical developments and applications, share knowledge and stimulate new ideas. This 11th meeting continues the successful experience of the previous ones which were held in different Argentinian cities. For the first time, the meeting was celebrated in Uruguay, more specifically, in the peaceful town of Colonia del Sacramento, designated a World Heritage Site by UNESCO. The conference presented an outstanding program of papers covering the most recent advances in Physics of Fluids in the following areas: General Fluid Dynamics General and non-Newtonian Flows Magnetohydrodynamics Electrohydrodynamics and Plasmas Hydraulics, Thermohydraulics and Multiple Phase Flows A website with full details of the conference program, abstracts and other information can be found at http://fluidos2010.fisica.edu.uy. We would like to thank all the participants, especially those who contributed with talks, posters and manuscripts, for making FLUDOS2010 such a successful conference. Our thanks also go to our colleagues for their support and encouragement, particularly in the refereeing of papers. We would like to acknowledge additional financial support from Comisión Sectorial de Investigación Científica (Universidad de la República, Uruguay), Programa de Desarrollo de las Ciencias Básicas (Uruguay) and the Centro Latinoamericano de Física (CLAF). Our thanks are extended to the local government of Colonia del Sacramento. The next FLUIDOS conference will be held in November 2013, in Buenos Aires, Argentina. We anticipate enjoying another successful FLUIDOS meeting to be held in one of the main cultural centres of the continent. Italo Bove, Cecilia Cabeza, Arturo C Martí, and Gustavo SarasúaEditors

Fabrication of three dimensional patterns of wide dimensional range using microbes and their applications

PubMed Central

Mehta, Sunita; Murugeson, Saravanan; Prakash, Balaji; Deepak

2015-01-01

Inspired by the wound healing property of certain trees, we report a novel microbes based additive process for producing three dimensional patterns, which has a potential of engineering applications in a variety of fields. Imposing a two dimensional pattern of microbes on a gel media and allowing them to grow in the third dimension is known from its use in biological studies. Instead, we have introduced an intermediate porous substrate between the gel media and the microbial growth, which enables three dimensional patterns in specific forms that can be lifted off and used in engineering applications. In order to demonstrate the applicability of this idea in a diverse set of areas, two applications are selected. In one, using this method of microbial growth, we have fabricated microlenses for enhanced light extraction in organic light emitting diodes, where densely packed microlenses of the diameters of hundreds of microns lead to luminance increase by a factor of 1.24X. In another entirely different type of application, braille text patterns are prepared on a normal office paper where the grown microbial colonies serve as braille tactile dots. Braille dot patterns thus prepared meet the standard specifications (size and spacing) for braille books. PMID:26486847

21 CFR 900.21 - Application for approval as a certification agency.

Code of Federal Regulations, 2010 CFR

2010-04-01

... description of the mammography quality standards the applicant will require facilities to meet and, for those... certification standards the applicant will require facilities to meet are the quality standards published under... SERVICES (CONTINUED) MAMMOGRAPHY QUALITY STANDARDS ACT MAMMOGRAPHY States as Certifiers § 900.21...

11 CFR 2.4 - Exempted meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 11 Federal Elections 1 2010-01-01 2010-01-01 false Exempted meetings. 2.4 Section 2.4 Federal Elections FEDERAL ELECTION COMMISSION SUNSHINE REGULATIONS; MEETINGS § 2.4 Exempted meetings. (a) Meetings required by statute to be closed. Meetings concerning matters specifically exempted from disclosure by...

Reuse: A knowledge-based approach

NASA Technical Reports Server (NTRS)

Iscoe, Neil; Liu, Zheng-Yang; Feng, Guohui

1992-01-01

This paper describes our research in automating the reuse process through the use of application domain models. Application domain models are explicit formal representations of the application knowledge necessary to understand, specify, and generate application programs. Furthermore, they provide a unified repository for the operational structure, rules, policies, and constraints of a specific application area. In our approach, domain models are expressed in terms of a transaction-based meta-modeling language. This paper has described in detail the creation and maintenance of hierarchical structures. These structures are created through a process that includes reverse engineering of data models with supplementary enhancement from application experts. Source code is also reverse engineered but is not a major source of domain model instantiation at this time. In the second phase of the software synthesis process, program specifications are interactively synthesized from an instantiated domain model. These specifications are currently integrated into a manual programming process but will eventually be used to derive executable code with mechanically assisted transformations. This research is performed within the context of programming-in-the-large types of systems. Although our goals are ambitious, we are implementing the synthesis system in an incremental manner through which we can realize tangible results. The client/server architecture is capable of supporting 16 simultaneous X/Motif users and tens of thousands of attributes and classes. Domain models have been partially synthesized from five different application areas. As additional domain models are synthesized and additional knowledge is gathered, we will inevitably add to and modify our representation. However, our current experience indicates that it will scale and expand to meet our modeling needs.

Design and Development of a Sharable Clinical Decision Support System Based on a Semantic Web Service Framework.

PubMed

Zhang, Yi-Fan; Gou, Ling; Tian, Yu; Li, Tian-Chang; Zhang, Mao; Li, Jing-Song

2016-05-01

Clinical decision support (CDS) systems provide clinicians and other health care stakeholders with patient-specific assessments or recommendations to aid in the clinical decision-making process. Despite their demonstrated potential for improving health care quality, the widespread availability of CDS systems has been limited mainly by the difficulty and cost of sharing CDS knowledge among heterogeneous healthcare information systems. The purpose of this study was to design and develop a sharable clinical decision support (S-CDS) system that meets this challenge. The fundamental knowledge base consists of independent and reusable knowledge modules (KMs) to meet core CDS needs, wherein each KM is semantically well defined based on the standard information model, terminologies, and representation formalisms. A semantic web service framework was developed to identify, access, and leverage these KMs across diverse CDS applications and care settings. The S-CDS system has been validated in two distinct client CDS applications. Model-level evaluation results confirmed coherent knowledge representation. Application-level evaluation results reached an overall accuracy of 98.66 % and a completeness of 96.98 %. The evaluation results demonstrated the technical feasibility and application prospect of our approach. Compared with other CDS engineering efforts, our approach facilitates system development and implementation and improves system maintainability, scalability and efficiency, which contribute to the widespread adoption of effective CDS within the healthcare domain.

78 FR 26399 - Arts Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-06

... times are approximate): Arts Education (application review): By teleconference. This meeting will be closed. Dates: May 22, 2013; 11:00 a.m. to 12:00 p.m. Innovation (application review): By teleconference...

AN ASSESSMENT OF FLYWHEEL HIGH POWER ENERGY STORAGE TECHNOLOGY FOR HYBRID VEHICLES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, James Gerald

2012-02-01

An assessment has been conducted for the DOE Vehicle Technologies Program to determine the state of the art of advanced flywheel high power energy storage systems to meet hybrid vehicle needs for high power energy storage and energy/power management. Flywheel systems can be implemented with either an electrical or a mechanical powertrain. The assessment elaborates upon flywheel rotor design issues of stress, materials and aspect ratio. Twelve organizations that produce flywheel systems submitted specifications for flywheel energy storage systems to meet minimum energy and power requirements for both light-duty and heavy-duty hybrid applications of interest to DOE. The most extensivemore » experience operating flywheel high power energy storage systems in heavy-duty and light-duty hybrid vehicles is in Europe. Recent advances in Europe in a number of vehicle racing venues and also in road car advanced evaluations are discussed. As a frame of reference, nominal weight and specific power for non-energy storage components of Toyota hybrid electric vehicles are summarized. The most effective utilization of flywheels is in providing high power while providing just enough energy storage to accomplish the power assist mission effectively. Flywheels are shown to meet or exceed the USABC power related goals (discharge power, regenerative power, specific power, power density, weight and volume) for HEV and EV batteries and ultracapacitors. The greatest technical challenge facing the developer of vehicular flywheel systems remains the issue of safety and containment. Flywheel safety issues must be addressed during the design and testing phases to ensure that production flywheel systems can be operated with adequately low risk.« less

Methodology of citrate-based biomaterial development and application

NASA Astrophysics Data System (ADS)

Tran, M. Richard

Biomaterials play central roles in modern strategies of regenerative medicine and tissue engineering. Attempts to find tissue-engineered solutions to cure various injuries or diseases have led to an enormous increase in the number of polymeric biomaterials over the past decade. The breadth of new materials arises from the multiplicity of anatomical locations, cell types, and mode of application, which all place application-specific requirements on the biomaterial. Unfortunately, many of the currently available biodegradable polymers are limited in their versatility to meet the wide range of requirements for tissue engineering. Therefore, a methodology of biomaterial development, which is able to address a broad spectrum of requirements, would be beneficial to the biomaterial field. This work presents a methodology of citrate-based biomaterial design and application to meet the multifaceted needs of tissue engineering. We hypothesize that (1) citric acid, a non-toxic metabolic product of the body (Krebs Cycle), can be exploited as a universal multifunctional monomer and reacted with various diols to produce a new class of soft biodegradable elastomers with the flexibility to tune the material properties of the resulting material to meet a wide range of requirements; (2) the newly developed citrate-based polymers can be used as platform biomaterials for the design of novel tissue engineering scaffolding; and (3) microengineering approaches in the form thin scaffold sheets, microchannels, and a new porogen design can be used to generate complex cell-cell and cell-microenvironment interactions to mimic tissue complexity and architecture. To test these hypotheses, we first developed a methodology of citrate-based biomaterial development through the synthesis and characterization of a family of in situ crosslinkable and urethane-doped elastomers, which are synthesized using simple, cost-effective strategies and offer a variety methods to tailor the material properties to meet the needs of a particular application. Next, we introduced a new porogen generation technique, and showed the potential application of the newly developed materials through the fabrication and characterization of scaffold sheets, multiphasic small diameter vascular grafts, and multichanneled nerve guides. Finally, the in vivo applications of citrate-based materials are exemplified through the evaluation of peripheral nerve regeneration using multichanneled guides and the ability to assist in injection-based endoscopic mucosal resection therapy. The results presented in this work show that citric acid can be utilized as a cornerstone in the development of novel biodegradable materials, and combined with microengineering approaches to produce the next generation of tissue engineering scaffolding. These enabling new biomaterials and scaffolding strategies should address many of the existing challenges in tissue engineering and advance the field as a whole.

78 FR 61348 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-03

...On September 16, 2013, in FR Doc. 2013-22453, on page 56871, the Department of Energy (DOE) published a notice of open meeting announcing a meeting on October 2, 2013 of the Environmental Management Site-Specific Advisory Board, Portsmouth (78 FR 56871). This notice announces the cancellation of this meeting.

Designing Class Activities to Meet Specific Core Training Competencies: A Developmental Approach

ERIC Educational Resources Information Center

Guth, Lorraine J.; McDonnell, Kelly A.

2004-01-01

This article presents a developmental model for designing and utilizing class activities to meet specific Association for Specialists in Group Work (ASGW) core training competencies for group workers. A review of the relevant literature about teaching group work and meeting core training standards is provided. The authors suggest a process by…

20 CFR 641.440 - What are the responsibility conditions that an applicant must meet?

Code of Federal Regulations, 2010 CFR

2010-04-01

... an applicant must meet? 641.440 Section 641.440 Employees' Benefits EMPLOYMENT AND TRAINING... Application, Eligibility, and Award Requirements § 641.440 What are the responsibility conditions that an... receipt of closeout package, whichever is later, unless an extension has been requested and granted. (h...

77 FR 19408 - Dynamic Mobility Applications and Data Capture Management Programs; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... DEPARTMENT OF TRANSPORTATION Dynamic Mobility Applications and Data Capture Management Programs...) Intelligent Transportation System Joint Program Office (ITS JPO) will host a free public meeting to provide stakeholders an update on the Data Capture and Management (DCM) and Dynamic Mobility Applications (DMA...

12 CFR 1807.801 - Evaluation of applications.

Code of Federal Regulations, 2011 CFR

2011-01-01

... assistance, the CDFI Fund will evaluate the Applicant's likelihood of success in meeting the factors set... CDFI Fund will also consider the Applicant's level of success in meeting its performance goals... selection. The CDFI Fund will select CMF Awardees based on the criteria described in paragraph (b) of this...

Progeria 101/FAQ

MedlinePlus

... Culture Protocols Immortalized Cell Culture Protocols Induced Pluripotent Stem Cells PRF Cell and Tissue Bank Publications Research Funding Opportunities Grant Application Application Deadlines Grants Funded Close Meet The Kids Meet The Kids Our Ambassadors Find The Other ...

Recent developments of post-modification of biochar for electrochemical energy storage.

PubMed

Cheng, Bin-Hai; Zeng, Raymond J; Jiang, Hong

2017-12-01

Biochar is a common byproduct from thermochemical conversion of biomass to produce bioenergy. However, the biochar features, such as morphology, porosity and surface chemistry, cannot be well controlled in conventional conversion approaches, limiting the wide application of raw biochar. Aiming to meet the specific requirements, post-modification of raw biochar was frequently conducted to improve the quality. In this review, recent developments regarding post-modification methods of biochar are presented and discussed. Progresses on the applications of post modified biochar as electrode materials for supercapacitors are intensively summarized. This review aims to reveal the key factors that affecting the performance of biochar-based supercapacitors, and provide guidance for rationalizing the modification methods to expand the applications of biochar-based functional materials in supercapacitors. Copyright © 2017 Elsevier Ltd. All rights reserved.

Using manufacturing message specification for monitor and control at Venus

NASA Technical Reports Server (NTRS)

Heuser, W. Randy; Chen, Richard L.; Stockett, Michael H.

1993-01-01

The flexibility and robustness of a monitor and control (M&C) system are a direct result of the underlying interprocessor communications architecture. A new architecture for M&C at the Deep Space Communications Complexes (DSCC's) has been developed based on the Manufacturing Message Specification (MMS) process control standard of the Open System Interconnection (OSI) suite of protocols. This architecture has been tested both in a laboratory environment and under operational conditions at the Deep Space Network (DSN) experimental Venus station (DSS-13). The Venus experience in the application of OSI standards to support M&C has been extremely successful. MMS meets the functional needs of the station and provides a level of flexibility and responsiveness previously unknown in that environment. The architecture is robust enough to meet current operational needs and flexible enough to provide a migration path for new subsystems. This paper will describe the architecture of the Venus M&C system, discuss how MMS was used and the requirements this imposed on other parts of the system, and provide results from systems and operational testing at the Venus site.

Balancing the health workforce: breaking down overall technical change into factor technical change for labour-an empirical application to the Dutch hospital industry.

PubMed

Blank, Jos L T; van Hulst, Bart L

2017-02-17

Well-trained, well-distributed and productive health workers are crucial for access to high-quality, cost-effective healthcare. Because neither a shortage nor a surplus of health workers is wanted, policymakers use workforce planning models to get information on future labour markets and adjust policies accordingly. A neglected topic of workforce planning models is productivity growth, which has an effect on future demand for labour. However, calculating productivity growth for specific types of input is not as straightforward as it seems. This study shows how to calculate factor technical change (FTC) for specific types of input. The paper first theoretically derives FTCs from technical change in a consistent manner. FTC differs from a ratio of output and input, in that it deals with the multi-input, multi-output character of the production process in the health sector. Furthermore, it takes into account substitution effects between different inputs. An application of the calculation of FTCs is given for the Dutch hospital industry for the period 2003-2011. A translog cost function is estimated and used to calculate technical change and FTC for individual inputs, especially specific labour inputs. The results show that technical change increased by 2.8% per year in Dutch hospitals during 2003-2011. FTC differs amongst the various inputs. The FTC of nursing personnel increased by 3.2% per year, implying that fewer nurses were needed to let demand meet supply on the labour market. Sensitivity analyses show consistent results for the FTC of nurses. Productivity growth, especially of individual outputs, is a neglected topic in workforce planning models. FTC is a productivity measure that is consistent with technical change and accounts for substitution effects. An application to the Dutch hospital industry shows that the FTC of nursing personnel outpaced technical change during 2003-2011. The optimal input mix changed, resulting in fewer nurses being needed to let demand meet supply on the labour market. Policymakers should consider using more detailed and specific data on the nature of technical change when forecasting the future demand for health workers.

Application of sunlight and lamps for plant irradiation in space bases

NASA Astrophysics Data System (ADS)

Sager, J. C.; Wheeler, R. M.

The radiation sources used for plant growth on a space base must meet the biological requirements for photosynthesis and photomorphogensis. In addition the sources must be energy and volume efficient, while maintaining the required irradiance levels, spectral, spatial and temporal distribution. These requirements are not easily met, but as the biological and mission requirements are better defined, then specific facility designs can begin to accommodate both the biological requirements and the physical limitations of a space based plant growth system.

Development of a New Generation of High-Temperature Thermoelectric Unicouples for Space Applications

NASA Technical Reports Server (NTRS)

Caillat, Thierry; Gogna, P.; Sakamoto, J.; Jewell, A.; Cheng, J.; Blair, R.; Fleurial, J. -P.; Ewell, R.

2006-01-01

RTG's have enabled surface and deep space missions since 1961: a) 26 flight missions without any RTG failures; and b) Mission durations in excess of 25 years. Future NASA missions require RTG s with high specific power and high efficiency, while retaining long life (> 14 years) and high reliability, (i.e. 6-8 W/kg, 10-15% efficiency). JPL in partnership with NASA-GRC, NASA-MSFC, DOE, Universities and Industry is developing advanced thermoelectric materials and converters to meet future NASA needs.

Application of sunlight and lamps for plant irradiation in space bases

NASA Technical Reports Server (NTRS)

Sager, J. C.; Wheeler, R. M.

1992-01-01

The radiation sources used for plant growth on a space base must meet the biological requirements for photosynthesis and photomorphogenesis. In addition, the sources must be energy and volume efficient, while maintaining the required irradiance levels, spectral, spatial and temporal distribution. These requirements are not easily met, but as the biological and mission requirements are better defined, then specific facility designs can begin to accommodate both the biological requirements and the physical limitations of a space-based plant growth system.

KPMG Peat Marwick LLP Corporation of Mercer University Fiscal Year Ended June 30, 1995

DTIC Science & Technology

1997-06-11

The objective of a quality control review is to ensure that the audit was conducted in accordance with applicable standards and meets the auditing...requirements of the OMB Circular A-133. We conducted a quality control review of the audit working papers. We focused our review on the following...qualitative aspects of the audit : due professional care, planning, supervision, independence, quality control, internal controls, substantive testing, general and specific compliance testing, and the Schedule of Federal Awards.

Recent advances in rational approaches for enzyme engineering

PubMed Central

Steiner, Kerstin; Schwab, Helmut

2012-01-01

Enzymes are an attractive alternative in the asymmetric syntheses of chiral building blocks. To meet the requirements of industrial biotechnology and to introduce new functionalities, the enzymes need to be optimized by protein engineering. This article specifically reviews rational approaches for enzyme engineering and de novo enzyme design involving structure-based approaches developed in recent years for improvement of the enzymes’ performance, broadened substrate range, and creation of novel functionalities to obtain products with high added value for industrial applications. PMID:24688651

17-4 PH and 15-5 PH

NASA Technical Reports Server (NTRS)

Johnson, Howard T.

1995-01-01

17-4 PH and 15-5 PH are extremely useful and versatile precipitation-hardening stainless steels. Armco 17-4 PH is well suited for the magnetic particle inspection requirements of Aerospace Material Specification. Armco 15-5 PH and 17-4 PH are produced in billet, plate, bar, and wire. Also, 15-5 PH is able to meet the stringent mechanical properties required in the aerospace and nuclear industries. Both products are easy to heat treat and machine, making them very useful in many applications.

Technology transfer of NASA microwave remote sensing system

NASA Technical Reports Server (NTRS)

Akey, N. D.

1981-01-01

Viable techniques for effecting the transfer from NASA to a user agency of state-of-the-art airborne microwave remote sensing technology for oceanographic applications were studied. A detailed analysis of potential users, their needs and priorities; platform options; airborne microwave instrument candidates; ancillary instrumentation; and other, less obvious factors that must be considered were studied. Conclusions and recommendations for the development of an orderly and effective technology transfer of an airborne microwave system that could meet the specific needs of the selected user agencies are reported.

Solar energy heating system design package for a single-family residence at New Castle, Pennsylvania

NASA Technical Reports Server (NTRS)

1977-01-01

The design of a solar heating and hot water system for a single family dwelling is described. Cost trade studies on the energy conservation and architectural features of the solar house are discussed. The present status of verification for the single family heating system, i.e., proof that the components and the system meet applicable physical and functional requirements, is reported. The system integration drawings, the major subsystems drawings, and the architect's specifications and plans are included.

Predictable And SuStainable Implementation Of National Cardiovascular Registries Infrastructure: A Think Tank Report from MDEpiNet

PubMed Central

Zeitler, Emily P.; Al-Khatib, Sana M.; Drozda, Joseph P.; Kessler, Larry G.; Kirtane, Ajay J.; Kong, David F.; Laschinger, John; Marinac-Dabic, Danica; Morice, Marie-Claude; Reed, Terrie; Sedrakyan, Art; Stein, Kenneth M.; Tcheng, James; Krucoff, Mitchell W.

2015-01-01

The Medical Device Epidemiological Network Initiative (MDEpiNet) is a public-private partnership between the US Food and Drug Administration (FDA) Center for Devices and Radiological Health (CDRH) and participating partners. The Predictable and SuStainable Implementation of National Cardiovascular Registries (PASSION) program is an MDEpiNet-sponsored program which aims to demonstrate the goals of MDEpiNet by using cardiovascular medical device registries to bridge evidence gaps across the medical device total product life cycle (TPLC). To this end, a PASSION Think Tank meeting took place in October 2014 in Silver Spring, MD, to facilitate discussion between stakeholders about the successes, challenges, and future novel applications of medical device registries, with particular emphasis on identifying pilot projects. Participants spanned a broad range of groups including patients, device manufacturers, regulators, physicians/academicians, professional societies, providers, and payers. The meeting focus included four areas of cardiovascular medicine intended to cultivate interest in four MDEpiNet Disease Specific/Device Specific Working Groups: coronary intervention, electrophysiology, valvular disease, and peripheral vascular disease. In addition, more general issues applying to registry-based infrastructure and analytical methodologies for assessing device benefit/risk were considered to provide context for the Working Groups as PASSION programs going forward. This article summarizes the discussions at the meeting and the future directions of the PASSION program. PMID:26699602

Progeria Research Foundation Diagnostic Testing Program

MedlinePlus

... Culture Protocols Immortalized Cell Culture Protocols Induced Pluripotent Stem Cells PRF Cell and Tissue Bank Publications Research Funding Opportunities Grant Application Application Deadlines Grants Funded Close Meet The Kids Meet The Kids Our Ambassadors Find The Other ...

Efficient, ultra-high-affinity chromatography in a one-step purification of complex proteins

PubMed Central

Vassylyeva, Marina N.; Klyuyev, Sergiy; Vassylyev, Alexey D.; Wesson, Hunter; Zhang, Zhuo; Renfrow, Matthew B.; Wang, Hengbin; Higgins, N. Patrick; Chow, Louise T.; Vassylyev, Dmitry G.

2017-01-01

Protein purification is an essential primary step in numerous biological studies. It is particularly significant for the rapidly emerging high-throughput fields, such as proteomics, interactomics, and drug discovery. Moreover, purifications for structural and industrial applications should meet the requirement of high yield, high purity, and high activity (HHH). It is, therefore, highly desirable to have an efficient purification system with a potential to meet the HHH benchmark in a single step. Here, we report a chromatographic technology based on the ultra-high-affinity (Kd ∼ 10−14–10−17 M) complex between the Colicin E7 DNase (CE7) and its inhibitor, Immunity protein 7 (Im7). For this application, we mutated CE7 to create a CL7 tag, which retained the full binding affinity to Im7 but was inactivated as a DNase. To achieve high capacity, we developed a protocol for a large-scale production and highly specific immobilization of Im7 to a solid support. We demonstrated its utility with one-step HHH purification of a wide range of traditionally challenging biological molecules, including eukaryotic, membrane, toxic, and multisubunit DNA/RNA-binding proteins. The system is simple, reusable, and also applicable to pulldown and kinetic activity/binding assays. PMID:28607052

Technology enablers for improved aerospace x-ray NDE

NASA Astrophysics Data System (ADS)

Strabel, George; Ross, Joseph; Graham, Larry; Smith, Kevin

1996-11-01

In the current climate of reduced Military spending and lower commercial demand for aerospace products, it is of critical importance to allocate scarce technology development resources to meet projected needs. During the past decade, dramatic advances in x-ray nondestructive evaluation (NDE) technology have results in commercially viable digital radiography (DR) and computed tomography (CT) systems. X-ray CT has become an important NDE technique that not only provides data about material integrity, but also valuable volumetric data which is finding applications in reverse engineering, rapid prototyping, process control and 3D metrology. Industrial DR and CT systems have been available for almost 10 years, but are very costly, generally designed for specific applications and have well known limitations for both process development and final inspection. They have inadequate energy/flux to penetrate many large components and structures. In order to support the US Aerospace Industry in its drive towards global competitiveness, it is imperative that key enabling tools such as DR and CT be improved, made affordable, and implemented to meet the anticipated needs of the next decade of aerospace applications. This paper describes a strategy for a consortium of suppliers and users of x-ray NDE systems, academia and national laboratories to work together to attain this goal.

Correlates of meeting the combined and independent aerobic and strength exercise guidelines in hematologic cancer survivors.

PubMed

Vallerand, James R; Rhodes, Ryan E; Walker, Gordon J; Courneya, Kerry S

2017-03-28

Most previous research on the correlates of physical activity has examined the aerobic or strength exercise guidelines separately. Such an approach does not allow an examination of the correlates of meeting the combined guidelines versus a single guideline, or one guideline versus the other. Here, we report the prevalence and correlates of meeting the combined and independent exercise guidelines in hematologic cancer survivors (HCS). In a population-based, cross-sectional survey of 606 HCS from Alberta, Canada using a mailed questionnaire, we obtained separate assessments of aerobic and strength exercise behaviors, as well as separate assessments for motivations, regulations, and reflective processes using the multi-process action control framework (M-PAC). Overall, 22% of HCS met the combined exercise guideline, 22% met aerobic-only, 10% met strength-only, and 46% met neither exercise guideline. HCS were more likely to meet the combined guideline over the aerobic-only guideline if they had no children living at home, and over both the aerobic and strength-only guidelines if they had completed university. As hypothesized, those meeting the combined guideline also had a more favorable strength-specific M-PAC profile (i.e., motivations, regulations, and reflective processes) than those meeting the aerobic-only guideline, and a more favorable aerobic-specific M-PAC profile than those meeting the strength-only guideline. Interestingly and unexpectedly, HCS meeting the combined guidelines also reported significantly greater aerobic-specific perceived control, planning, and obligation/regret than those meeting the aerobic-only guideline, and greater strength-specific perceived control, planning, and obligation/regret than those meeting the strength-only guideline. Few HCS are meeting the combined exercise guidelines. M-PAC based variables are strong correlates of meeting the combined guidelines compared to aerobic or strength only guidelines. Strategies to help HCS meet the combined guidelines may need to promote more favorable behavioral regulations and reflective processes for both types of exercise rather than just the type of exercise in which HCS are deficient.

Online Multitasking Line-Scan Imaging Techniques for Simultaneous Safety and Quality Evaluation of Apples

NASA Astrophysics Data System (ADS)

Kim, Moon Sung; Lee, Kangjin; Chao, Kaunglin; Lefcourt, Alan; Cho, Byung-Kwan; Jun, Won

We developed a push-broom, line-scan imaging system capable of simultaneous measurements of reflectance and fluorescence. The system allows multitasking inspections for quality and safety attributes of apples due to its dynamic capabilities in simultaneously capturing fluorescence and reflectance, and selectivity in multispectral bands. A multitasking image-based inspection system for online applications has been suggested in that a single imaging device that could perform a multitude of both safety and quality inspection needs. The presented multitask inspection approach in online applications may provide an economically viable means for a number of food processing industries being able to adapt to operate and meet the dynamic and specific inspection and sorting needs.

Optical fiber voltage sensors for broad temperature ranges

NASA Technical Reports Server (NTRS)

Rose, A. H.; Day, G. W.

1992-01-01

We describe the development of an optical fiber ac voltage sensor for aircraft and spacecraft applications. Among the most difficult specifications to meet for this application is a temperature stability of +/- 1 percent from -65 C to +125 C. This stability requires a careful selection of materials, components, and optical configuration with further compensation using an optical-fiber temperature sensor located near the sensing element. The sensor is a polarimetric design, based on the linear electro-optic effect in bulk Bi4Ge3O12. The temperature sensor is also polarimetric, based on the temperature dependence of the birefringence of bulk SiO2. The temperature sensor output is used to automatically adjust the calibration of the instrument.

75 FR 24685 - Environmental Management Site-Specific Advisory Board, Idaho National Laboratory

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-05

... DEPARTMENT OF ENERGY Environmental Management Site-Specific Advisory Board, Idaho National... meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Idaho National Laboratory... prior to the meeting. ADDRESSES: Hilton Garden Inn, 700 Lindsay Boulevard, Idaho Falls, Idaho 83402. FOR...

77 FR 38276 - Environmental Management Site-Specific Advisory Board, Idaho National Laboratory

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... DEPARTMENT OF ENERGY Environmental Management Site-Specific Advisory Board, Idaho National... a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Idaho National... times prior to the meeting. ADDRESSES: Red Lion Hotel, 1555 Pocatello Creek Road, Pocatello, Idaho 83201...

40 CFR 80.533 - How does a refiner or importer apply for a motor vehicle or non-highway baseline for the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... (kerosene), and fuel specifically produced to meet military specifications (such as JP-4, JP-8, and F-76...), fuel produced for export, jet fuel, kerosene, and fuel specifically produced to meet military...

40 CFR 80.533 - How does a refiner or importer apply for a motor vehicle or non-highway baseline for the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... (kerosene), and fuel specifically produced to meet military specifications (such as JP-4, JP-8, and F-76...), fuel produced for export, jet fuel, kerosene, and fuel specifically produced to meet military...

40 CFR 80.533 - How does a refiner or importer apply for a motor vehicle or non-highway baseline for the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... (kerosene), and fuel specifically produced to meet military specifications (such as JP-4, JP-8, and F-76...), fuel produced for export, jet fuel, kerosene, and fuel specifically produced to meet military...

40 CFR 80.533 - How does a refiner or importer apply for a motor vehicle or non-highway baseline for the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... (kerosene), and fuel specifically produced to meet military specifications (such as JP-4, JP-8, and F-76...), fuel produced for export, jet fuel, kerosene, and fuel specifically produced to meet military...

40 CFR 80.533 - How does a refiner or importer apply for a motor vehicle or non-highway baseline for the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (kerosene), and fuel specifically produced to meet military specifications (such as JP-4, JP-8, and F-76...), fuel produced for export, jet fuel, kerosene, and fuel specifically produced to meet military...

77 FR 67836 - Arts Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-14

...: November 27, 2012; 9:00 a.m. to 6:00 p.m. EST. Music (application review): Virtual, from Room 716. This..., 2012, from 9:00 a.m. to 6:00 p.m. EST. Music (application review): In room 714. This meeting will be... room 716. This meeting will be closed. Dates: November 29, 2012; 9:00 a.m. to 6:30 p.m. EST. Music...

21 CFR 312.47 - Meetings.

Code of Federal Regulations, 2013 CFR

2013-04-01

... meetings held near completion of Phase 3 and before submission of a marketing application (“pre-NDA... uses under investigation. (ii) Eligibility for meeting. While the end-of-Phase 2 meeting is designed... Phase 3 tests are made. The scheduling of an end-of-Phase 2 meeting is not, however, intended to delay...

Carbon nanotubes: a novel material for multifaceted applications in human healthcare.

PubMed

Kumar, Sandeep; Rani, Ruma; Dilbaghi, Neeraj; Tankeshwar, K; Kim, Ki-Hyun

2017-01-03

Remarkable advances have been achieved in modern material technology, especially in device fabrication, and these have facilitated the use of diverse materials in various applications. Carbon nanotubes (CNTs) are being successfully implemented in drug delivery, sensing, water purification, composite materials, and bone scaffolds. Thus, CNTs must meet a wide range of criteria such as surface modification, high aspect ratio, desired conductivity, high porosity and loading, non-toxicity, specificity, and selectivity, and compatibility for device fabrication. The main focus of this review is to explore the maximum applications of CNTs for human health, and we particularly focus on nanocarrier and biomedical applications. The scope of this review initially covers the basic aspects of CNTs and is also extended further to describe their synthesis strategies as well as various challenges encountered in their functionalization, dispersion, and toxicity. Our discussion also emphasizes future directions for these emerging fields of research.

National Knowledge Commission

NASA Astrophysics Data System (ADS)

Pitroda, Sam

2007-04-01

India's National Knowledge Commission (NKC) established by the prime minister is focused on building institutions and infrastructure in Education, Science and Technology, Innovation etc. to meet the challenges of the knowledge economy in the 21st century and increase India's competitive advantage in the global market. India today stands poised to reap the benefits of a rapidly growing economy and a major demographic advantage, with 550 million young people below the age of 25 years, the largest in the world. The NKC is focused on five critical areas of knowledge related to access, concepts, creation, applications and services. This includes a variety of subject areas such as language, translations, libraries, networks, portals, affirmative action, distance learning, intellectual property, Entrepreneurship, application in Agriculture, health, small and medium scale industries, e-governance etc. One of the keys to this effort is to build a national broadband gigabit of networks of 500 nodes to connect universities, Libraries, Laboratories, Hospitals, Agriculture institutions etc. to share resources and collaborate on multidisciplinary activities. This presentation will introduce the NKC, discuss methodology, subject areas, specific recommendation and outline a plan to build knowledge networks and specifics on network architecture, applications, and utilities.

Draft standard for color AMLCDs in U.S. military aircraft

NASA Astrophysics Data System (ADS)

Hopper, Darrel G.; Dolezal, William K.; Schur, Keith; Liccione, John W.

1994-06-01

Flight instruments have begun to use color active liquid crystal displays (AMLCDs), signaling the beginning of a significant transition from electromechanical and cathode ray tube display designs to AMLCD designs. We have the opportunity with this new technology to establish common products capable of meeting user requirements for sunlight-readable, color and gray scale-capable, high-pixel-count, flat-panel displays for weapon systems. The Wright Laboratory is leading the development of standard and specification documentation for this new generation of display modules based on requirements for U.S. military aircraft. These requirements are similar in many ways to those of both the civil aviation and automotive industries. Accordingly, commonality with these applications is incorporated, where possible, along with the requirements for all military combat applications. Industry and government organizations are involved in this process through workshops and draft review processes. Military procurement specifications for combat system applications may use this information as a source of recommended best practice for this new generation of digital flat panel displays. The draft standard will be revised based upon continuing feedback by early 1995.

49 CFR 179.200-1 - Tank built under these specifications must meet the requirements of §§ 179.200, and 179.201.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.200-1 Tank built under these specifications must meet...

49 CFR 179.200-1 - Tank built under these specifications must meet the requirements of §§ 179.200, and 179.201.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.200-1 Tank built under these specifications must meet...

49 CFR 179.200-1 - Tank built under these specifications must meet the requirements of §§ 179.200, and 179.201.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.200-1 Tank built under these specifications must meet...

49 CFR 179.220-1 - Tanks built under these specifications must meet the requirements of §§ 179.220 and 179.221.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.220-1 Tanks built under these specifications must meet...

Validation and evaluation of common large-area display set (CLADS) performance specification

NASA Astrophysics Data System (ADS)

Hermann, David J.; Gorenflo, Ronald L.

1998-09-01

Battelle is under contract with Warner Robins Air Logistics Center to design a Common Large Area Display Set (CLADS) for use in multiple Command, Control, Communications, Computers, and Intelligence (C4I) applications that currently use 19- inch Cathode Ray Tubes (CRTs). Battelle engineers have built and fully tested pre-production prototypes of the CLADS design for AWACS, and are completing pre-production prototype displays for three other platforms simultaneously. With the CLADS design, any display technology that can be packaged to meet the form, fit, and function requirements defined by the Common Large Area Display Head Assembly (CLADHA) performance specification is a candidate for CLADS applications. This technology independent feature reduced the risk of CLADS development, permits life long technology insertion upgrades without unnecessary redesign, and addresses many of the obsolescence problems associated with COTS technology-based acquisition. Performance and environmental testing were performed on the AWACS CLADS and continues on other platforms as a part of the performance specification validation process. A simulator assessment and flight assessment were successfully completed for the AWACS CLADS, and lessons learned from these assessments are being incorporated into the performance specifications. Draft CLADS specifications were released to potential display integrators and manufacturers for review in 1997, and the final version of the performance specifications are scheduled to be released to display integrators and manufacturers in May, 1998. Initial USAF applications include replacements for the E-3 AWACS color monitor assembly, E-8 Joint STARS graphics display unit, and ABCCC airborne color display. Initial U.S. Navy applications include the E-2C ACIS display. For these applications, reliability and maintainability are key objectives. The common design will reduce the cost of operation and maintenance by an estimated 3.3M per year on E-3 AWACS alone. It is realistic to anticipate savings of over 30M per year as CLADS is implemented widely across DoD applications. As commonality and open systems interfaces begin to surface in DoD applications, the CLADS architecture can easily and cost effectively absorb the changes, and avoid COTS obsolescence issues.

On the nature of cross-disciplinary integration: A philosophical framework.

PubMed

O'Rourke, Michael; Crowley, Stephen; Gonnerman, Chad

2016-04-01

Meeting grand challenges requires responses that constructively combine multiple forms of expertise, both academic and non-academic; that is, it requires cross-disciplinary integration. But just what is cross-disciplinary integration? In this paper, we supply a preliminary answer by reviewing prominent accounts of cross-disciplinary integration from two literatures that are rarely brought together: cross-disciplinarity and philosophy of biology. Reflecting on similarities and differences in these accounts, we develop a framework that integrates their insights-integration as a generic combination process the details of which are determined by the specific contexts in which particular integrations occur. One such context is cross-disciplinary research, which yields cross-disciplinary integration. We close by reflecting on the potential applicability of this framework to research efforts aimed at meeting grand challenges. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Alpha consensus meeting on cryopreservation key performance indicators and benchmarks: proceedings of an expert meeting.

PubMed

2012-08-01

This proceedings report presents the outcomes from an international workshop designed to establish consensus on: definitions for key performance indicators (KPIs) for oocyte and embryo cryopreservation, using either slow freezing or vitrification; minimum performance level values for each KPI, representing basic competency; and aspirational benchmark values for each KPI, representing best practice goals. This report includes general presentations about current practice and factors for consideration in the development of KPIs. A total of 14 KPIs were recommended and benchmarks for each are presented. No recommendations were made regarding specific cryopreservation techniques or devices, or whether vitrification is 'better' than slow freezing, or vice versa, for any particular stage or application, as this was considered to be outside the scope of this workshop. Copyright © 2012 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

75 FR 56527 - Environmental Management Site-Specific Advisory Board, Idaho National Laboratory

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

... DEPARTMENT OF ENERGY Environmental Management Site-Specific Advisory Board, Idaho National... meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Idaho National Laboratory... prior to the meeting. ADDRESSES: Coeur d'Alene Resort, 115 South Second Street, Coeur d'Alene, Idaho...

78 FR 78467 - Connected Vehicle Research Program Public Meeting; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

... connected vehicle technologies. The primary target audience for the meeting is State and local Departments... meeting is specifically focused for an audience that has followed connected vehicle research and is...

Recovery Act: Advanced Direct Methanol Fuel Cell for Mobile Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fletcher, James H.; Cox, Philip; Harrington, William J

2013-09-03

ABSTRACT Project Title: Recovery Act: Advanced Direct Methanol Fuel Cell for Mobile Computing PROJECT OBJECTIVE The objective of the project was to advance portable fuel cell system technology towards the commercial targets of power density, energy density and lifetime. These targets were laid out in the DOE’s R&D roadmap to develop an advanced direct methanol fuel cell power supply that meets commercial entry requirements. Such a power supply will enable mobile computers to operate non-stop, unplugged from the wall power outlet, by using the high energy density of methanol fuel contained in a replaceable fuel cartridge. Specifically this project focusedmore » on balance-of-plant component integration and miniaturization, as well as extensive component, subassembly and integrated system durability and validation testing. This design has resulted in a pre-production power supply design and a prototype that meet the rigorous demands of consumer electronic applications. PROJECT TASKS The proposed work plan was designed to meet the project objectives, which corresponded directly with the objectives outlined in the Funding Opportunity Announcement: To engineer the fuel cell balance-of-plant and packaging to meet the needs of consumer electronic systems, specifically at power levels required for mobile computing. UNF used existing balance-of-plant component technologies developed under its current US Army CERDEC project, as well as a previous DOE project completed by PolyFuel, to further refine them to both miniaturize and integrate their functionality to increase the system power density and energy density. Benefits of UNF’s novel passive water recycling MEA (membrane electrode assembly) and the simplified system architecture it enabled formed the foundation of the design approach. The package design was hardened to address orientation independence, shock, vibration, and environmental requirements. Fuel cartridge and fuel subsystems were improved to ensure effective fuel containment. PROJECT OVERVIEW The University of North Florida (UNF), with project partner the University of Florida, recently completed the Department of Energy (DOE) project entitled “Advanced Direct Methanol Fuel Cell for Mobile Computing”. The primary objective of the project was to advance portable fuel cell system technology towards the commercial targets as laid out in the DOE R&D roadmap by developing a 20-watt, direct methanol fuel cell (DMFC), portable power supply based on the UNF innovative “passive water recovery” MEA. Extensive component, sub-system, and system development and testing was undertaken to meet the rigorous demands of the consumer electronic application. Numerous brassboard (nonpackaged) systems were developed to optimize the integration process and facilitating control algorithm development. The culmination of the development effort was a fully-integrated, DMFC, power supply (referred to as DP4). The project goals were 40 W/kg for specific power, 55 W/l for power density, and 575 Whr/l for energy density. It should be noted that the specific power and power density were for the power section only, and did not include the hybrid battery. The energy density is based on three, 200 ml, fuel cartridges, and also did not include the hybrid battery. The results show that the DP4 system configured without the methanol concentration sensor exceeded all performance goals, achieving 41.5 W/kg for specific power, 55.3 W/l for power density, and 623 Whr/l for energy density. During the project, the DOE revised its technical targets, and the definition of many of these targets, for the portable power application. With this revision, specific power, power density, specific energy (Whr/kg), and energy density are based on the total system, including fuel tank, fuel, and hybridization battery. Fuel capacity is not defined, but the same value is required for all calculations. Test data showed that the DP4 exceeded all 2011 Technical Status values; for example, the DP4 energy density was 373 Whr/l versus the DOE 2011 status of 200 Whr/l. For the DOE 2013 Technical Goals, the operation time was increased from 10 hours to 14.3 hours. Under these conditions, the DP4 closely approached or surpassed the technical targets; for example, the DP4 achieved 468 Whr/l versus the goal of 500 Whr/l. Thus, UNF has successfully met the project goals. A fully-operational, 20-watt DMFC power supply was developed based on the UNF passive water recovery MEA. The power supply meets the project performance goals and advances portable power technology towards the commercialization targets set by the DOE.« less

49 CFR 260.19 - Preapplication meeting.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Preapplication meeting. 260.19 Section 260.19 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Financial Assistance § 260.19 Preapplication meeting. Potential Applicants may request a meeting with the...

2004 Photon Correlation and Scattering Conference

NASA Technical Reports Server (NTRS)

Meyer, William (Editor); Smart, Anthony (Editor); Wegdam, Gerard (Editor); Dogariu, Aristide (Editor); Carpenter, Bradley (Editor)

2004-01-01

The Photon Correlation and Scattering (PCS) meeting welcomes all who are interested in the art and science of photon correlation and its application to optical scattering. The meeting is intended to enhance interactions between theory, applications, instrument design, and participants.

75 FR 13135 - Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

...). Grant applications for the Medical Liability and Safety Demonstration Projects (R18) applications are to... disclosure under the above-cited statutes. SEP Meeting on: Medical Liability and Safety Demonstration.... Bonnie Campbell, Committee Management Officer, Office of Extramural Research, Education and Priority...

78 FR 11235 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... Research grant program on the subject of New World Archaeology and Anthropology, submitted to the Division... discuss applications for the America's Historical & Cultural Organizations Implementation grant program on...: 421. This meeting will discuss applications for the America's Historical & Cultural Organizations...

Engineered Polymerases Enable Novel Sequencing Applications (7th Annual SFAF Meeting, 2012)

ScienceCinema

Appel, Maryke

2018-01-15

Maryke Appel on "Engineered polymerases provide improved NGS library amplification and enable novel sequencing applications" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

SNPase-ARMS qPCR: Ultrasensitive Mutation-Based Detection of Cell-Free Tumor DNA in Melanoma Patients

PubMed Central

Stadler, Julia; Eder, Johanna; Pratscher, Barbara; Brandt, Sabine; Schneller, Doris; Müllegger, Robert; Vogl, Claus; Trautinger, Franz; Brem, Gottfried; Burgstaller, Joerg P.

2015-01-01

Cell-free circulating tumor DNA in the plasma of cancer patients has become a common point of interest as indicator of therapy options and treatment response in clinical cancer research. Especially patient- and tumor-specific single nucleotide variants that accurately distinguish tumor DNA from wild type DNA are promising targets. The reliable detection and quantification of these single-base DNA variants is technically challenging. Currently, a variety of techniques is applied, with no apparent “gold standard”. Here we present a novel qPCR protocol that meets the conditions of extreme sensitivity and specificity that are required for detection and quantification of tumor DNA. By consecutive application of two polymerases, one of them designed for extreme base-specificity, the method reaches unprecedented sensitivity and specificity. Three qPCR assays were tested with spike-in experiments, specific for point mutations BRAF V600E, PTEN T167A and NRAS Q61L of melanoma cell lines. It was possible to detect down to one copy of tumor DNA per reaction (Poisson distribution), at a background of up to 200 000 wild type DNAs. To prove its clinical applicability, the method was successfully tested on a small cohort of BRAF V600E positive melanoma patients. PMID:26562020

Identification and status of design improvements to the NASA Shuttle EMU for International Space Station application.

PubMed

Wilde, R C; McBarron, J W; Faszcza, J J

1997-06-01

To meet the significant increase in EVA demand to support assembly and operations of the International Space Station (ISS), NASA and industry have improved the current Shuttle Extravehicular Mobility Unit (EMU), or "space suit", configuration to meet the unique and specific requirements of an orbital-based system. The current Shuttle EMU was designed to be maintained and serviced on the ground between frequent Shuttle flights. ISS will require the EMUs to meet increased EVAs out of the Shuttle Orbiter and to remain on orbit for up to 180 days without need for regular return to Earth for scheduled maintenance or refurbishment. Ongoing Shuttle EMU improvements have increased reliability, operational life and performance while minimizing ground and on-orbit maintenance cost and expendable inventory. Modifications to both the anthropomorphic mobility elements of the Space Suit Assembly (SSA) as well as to the Primary Life Support System (PLSS) are identified and discussed. This paper also addresses the status of on-going Shuttle EMU improvements and summarizes the approach for increasing interoperability of the U.S. and Russian space suits to be utilized aboard the ISS.

Cost-effective and business-beneficial computer validation for bioanalytical laboratories.

PubMed

McDowall, Rd

2011-07-01

Computerized system validation is often viewed as a burden and a waste of time to meet regulatory requirements. This article presents a different approach by looking at validation in a bioanalytical laboratory from the business benefits that computer validation can bring. Ask yourself the question, have you ever bought a computerized system that did not meet your initial expectations? This article will look at understanding the process to be automated, the paper to be eliminated and the records to be signed to meet the requirements of the GLP or GCP and Part 11 regulations. This paper will only consider commercial nonconfigurable and configurable software such as plate readers and LC-MS/MS data systems rather than LIMS or custom applications. Two streamlined life cycle models are presented. The first one consists of a single document for validation of nonconfigurable software. The second is for configurable software and is a five-stage model that avoids the need to write functional and design specifications. Both models are aimed at managing the risk each type of software poses whist reducing the amount of documented evidence required for validation.

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Gas Operations (as incorporated by reference in § 250.198); and (ii) API Spec Q1, Specification for... in § 250.198). (3) All SSV's and USV's must meet the technical specifications of API Spec 6A and 6AV1. All SSSVs must meet the technical specifications of API Specification 14A (as incorporated by...

A self-learning camera for the validation of highly variable and pseudorandom patterns

NASA Astrophysics Data System (ADS)

Kelley, Michael

2004-05-01

Reliable and productive manufacturing operations have depended on people to quickly detect and solve problems whenever they appear. Over the last 20 years, more and more manufacturing operations have embraced machine vision systems to increase productivity, reliability and cost-effectiveness, including reducing the number of human operators required. Although machine vision technology has long been capable of solving simple problems, it has still not been broadly implemented. The reason is that until now, no machine vision system has been designed to meet the unique demands of complicated pattern recognition. The ZiCAM family was specifically developed to be the first practical hardware to meet these needs. To be able to address non-traditional applications, the machine vision industry must include smart camera technology that meets its users" demands for lower costs, better performance and the ability to address applications of irregular lighting, patterns and color. The next-generation smart cameras will need to evolve as a fundamentally different kind of sensor, with new technology that behaves like a human but performs like a computer. Neural network based systems, coupled with self-taught, n-space, non-linear modeling, promises to be the enabler of the next generation of machine vision equipment. Image processing technology is now available that enables a system to match an operator"s subjectivity. A Zero-Instruction-Set-Computer (ZISC) powered smart camera allows high-speed fuzzy-logic processing, without the need for computer programming. This can address applications of validating highly variable and pseudo-random patterns. A hardware-based implementation of a neural network, Zero-Instruction-Set-Computer, enables a vision system to "think" and "inspect" like a human, with the speed and reliability of a machine.

Low–Cost Bio-Based Carbon Fiber for High-Temperature Processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naskar, Amit K.; Akato, Kokouvi M.; Tran, Chau D.

GrafTech International Holdings Inc. (GTI), worked with Oak Ridge National Laboratory (ORNL) under CRADA No. NFE-15-05807 to develop lignin-based carbon fiber (LBCF) technology and to demonstrate LBCF performance in high-temperature products and applications. This work was unique and different from other reported LBCF work in that this study was application-focused and scalability-focused. Accordingly, the executed work was based on meeting criteria based on technology development, cost, and application suitability. The focus of this work was to demonstrate lab-scale LBCF from at least 4 different precursor feedstock sources that could meet the estimated production cost of $5.00/pound and have ash levelmore » of less than 500 ppm in the carbonized insulation-grade fiber. Accordingly, a preliminary cost model was developed based on publicly available information. The team demonstrated that 4 lignin samples met the cost criteria, as highlighted in Table 1. In addition, the ash level for the 4 carbonized lignin samples were below 500 ppm. Processing asreceived lignin to produce a high purity lignin fiber was a significant accomplishment in that most industrial lignin, prior to purification, had greater than 4X the ash level needed for this project, and prior to this work there was not a clear path of how to achieve the purity target. The lab scale development of LBCF was performed with a specific functional application in mind, specifically for high temperature rigid insulation. GTI is currently a consumer of foreignsourced pitch and rayon based carbon fibers for use in its high temperature insulation products, and the motivation was that LBCF had potential to decrease costs and increase product competitiveness in the marketplace through lowered raw material costs, lowered energy costs, and decreased environmental footprint. At the end of this project, the Technology Readiness Level (TRL) remained at 5 for LBCF in high temperature insulation.« less

75 FR 13134 - Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

...)(6). Grant applications for the Medical Liability and Safety Innovation Projects (R21) applications... disclosure under the above- cited statutes. SEP Meeting on: Medical Liability and Safety Innovation Projects..., Committee Management Officer, Office of Extramural Research, Education and Priority Populations, AHRQ, 540...

78 FR 28244 - Arts Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-14

.... Dates: June 12, 2013; 2:00 p.m. to 4:00 p.m. EDT. Music (application review): Room 714. This meeting... closed. Dates: June 14, 2013; 9:00 a.m. to 5:00 p.m. EDT. Music (application review): Room 714. This...

34 CFR 222.171 - What LEAs may be eligible for Discretionary Construction grants?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Meet the specific numeric requirements regarding bonding capacity. (2) The Secretary must also consider... students; or (v) Meet the specific numeric requirements regarding bonding capacity. (2) The Secretary must...

Influence of technology on magnetic tape storage device characteristics

NASA Technical Reports Server (NTRS)

Gniewek, John J.; Vogel, Stephen M.

1994-01-01

There are available today many data storage devices that serve the diverse application requirements of the consumer, professional entertainment, and computer data processing industries. Storage technologies include semiconductors, several varieties of optical disk, optical tape, magnetic disk, and many varieties of magnetic tape. In some cases, devices are developed with specific characteristics to meet specification requirements. In other cases, an existing storage device is modified and adapted to a different application. For magnetic tape storage devices, examples of the former case are 3480/3490 and QIC device types developed for the high end and low end segments of the data processing industry respectively, VHS, Beta, and 8 mm formats developed for consumer video applications, and D-1, D-2, D-3 formats developed for professional video applications. Examples of modified and adapted devices include 4 mm, 8 mm, 12.7 mm and 19 mm computer data storage devices derived from consumer and professional audio and video applications. With the conversion of the consumer and professional entertainment industries from analog to digital storage and signal processing, there have been increasing references to the 'convergence' of the computer data processing and entertainment industry technologies. There has yet to be seen, however, any evidence of convergence of data storage device types. There are several reasons for this. The diversity of application requirements results in varying degrees of importance for each of the tape storage characteristics.

Designing a web-application to support home-based care of childhood CKD stages 3-5: qualitative study of family and professional preferences.

PubMed

Swallow, Veronica M; Hall, Andrew G; Carolan, Ian; Santacroce, Sheila; Webb, Nicholas J A; Smith, Trish; Hanif, Noreen

2014-02-18

There is a lack of online, evidence-based information and resources to support home-based care of childhood CKD stages 3-5. Qualitative interviews were undertaken with parents, patients and professionals to explore their views on content of the proposed online parent information and support (OPIS) web-application. Data were analysed using Framework Analysis, guided by the concept of Self-efficacy. 32 parents, 26 patients and 12 professionals were interviewed. All groups wanted an application that explains, demonstrates, and enables parental clinical care-giving, with condition-specific, continously available, reliable, accessible material and a closed communication system to enable contact between families living with CKD. Professionals advocated a regularly updated application to empower parents to make informed health-care decisions. To address these requirements, key web-application components were defined as: (i) Clinical care-giving support (information on treatment regimens, video-learning tools, condition-specific cartoons/puzzles, and a question and answer area) and (ii) Psychosocial support for care-giving (social-networking, case studies, managing stress, and enhancing families' health-care experiences). Developing a web-application that meets parents' information and support needs will maximise its utility, thereby augmenting parents' self-efficacy for CKD caregiving, and optimising outcomes. Self-efficacy theory provides a schema for how parents' self-efficacy beliefs about management of their child's CKD could potentially be promoted by OPIS.

Datacasting V3.0

NASA Technical Reports Server (NTRS)

Bingham, Andrew W.; McCleese, Sean W.; Deen, Robert G.; Chung, Nga T.; Stough, Timothy M.

2013-01-01

Datacasting V3.0 provides an RSSbased feed mechanism for publishing the availability of Earth science data records in real time. It also provides a utility for subscribing to these feeds and sifting through all the items in an automatic manner to identify and download the data records that are required for a specific application. Datacasting is a method by which multiple data providers can publish the availability of new Earth science data and users download those files that meet a predefined need; for example, to only download data files related to a specific earthquake or region on the globe. Datacasting is a server-client architecture. The server-side software is used by data providers to create and publish the metadata about recently available data according to the Datacasting RSS (Really Simple Syndication) specification. The client software subscribes to the Datacasting RSS and other RSS-based feeds. By configuring filters associated with feeds, data consumers can use the client to identify and automatically download files that meet a specific need. On the client side, a Datacasting feed reader monitors the server for new feeds. The feed reader will be tuned by the user, via a graphical user interface (GUI), to examine the content of the feeds and initiate a data pull after some criteria are satisfied. The criteria might be, for example, to download sea surface temperature data for a particular region that has cloud cover less than 50% and during daylight hours. After the granule is downloaded to the client, the user will have the ability to visualize the data in the GUI. Based on the popular concept of podcasting, which gives listeners the capability to download only those MP3 files that match their preference, Earth science Datacasting will give users a method to download only the Earth science data files that are required for a particular application.

46 CFR 551.1 - Actions to adjust or meet conditions unfavorable to shipping in specific trades.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 9 2014-10-01 2014-10-01 false Actions to adjust or meet conditions unfavorable to shipping in specific trades. 551.1 Section 551.1 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AND ACTIONS TO ADDRESS RESTRICTIVE FOREIGN MARITIME PRACTICES ACTIONS TO ADJUST OR MEET CONDITIONS UNFAVORABLE TO SHIPPING IN THE U.S. FOREIGN TRADE § 551....

46 CFR 551.1 - Actions to adjust or meet conditions unfavorable to shipping in specific trades.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 9 2011-10-01 2011-10-01 false Actions to adjust or meet conditions unfavorable to shipping in specific trades. 551.1 Section 551.1 Shipping FEDERAL MARITIME COMMISSION REGULATIONS AND ACTIONS TO ADDRESS RESTRICTIVE FOREIGN MARITIME PRACTICES ACTIONS TO ADJUST OR MEET CONDITIONS UNFAVORABLE TO SHIPPING IN THE U.S. FOREIGN TRADE § 551....

40 CFR 261.38 - Exclusion of comparable fuel and syngas fuel.

Code of Federal Regulations, 2013 CFR

2013-07-01

... J/g). (B) Viscosity. The viscosity must not exceed: 50 cS, as-fired. (ii) Constituent specifications..., except as provided by paragraph (a)(3)(ii) of this section: (ii) Blending to meet the viscosity specification. A hazardous waste blended to meet the viscosity specification for comparable fuel shall: (A) As...

40 CFR 261.38 - Exclusion of comparable fuel and syngas fuel.

Code of Federal Regulations, 2014 CFR

2014-07-01

... J/g). (B) Viscosity. The viscosity must not exceed: 50 cS, as-fired. (ii) Constituent specifications..., except as provided by paragraph (a)(3)(ii) of this section: (ii) Blending to meet the viscosity specification. A hazardous waste blended to meet the viscosity specification for comparable fuel shall: (A) As...

40 CFR 261.38 - Exclusion of comparable fuel and syngas fuel.

Code of Federal Regulations, 2012 CFR

2012-07-01

... J/g). (B) Viscosity. The viscosity must not exceed: 50 cS, as-fired. (ii) Constituent specifications..., except as provided by paragraph (a)(3)(ii) of this section: (ii) Blending to meet the viscosity specification. A hazardous waste blended to meet the viscosity specification for comparable fuel shall: (A) As...

12 CFR 7.2001 - Notice of shareholders' meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND OPERATIONS Corporate Practices § 7.2001 Notice of shareholders' meetings. A national bank must... notice of the shareholder's meeting. The articles of association, bylaws, or law applicable to a national...

Design verification of SIFT

NASA Technical Reports Server (NTRS)

Moser, Louise; Melliar-Smith, Michael; Schwartz, Richard

1987-01-01

A SIFT reliable aircraft control computer system, designed to meet the ultrahigh reliability required for safety critical flight control applications by use of processor replications and voting, was constructed for SRI, and delivered to NASA Langley for evaluation in the AIRLAB. To increase confidence in the reliability projections for SIFT, produced by a Markov reliability model, SRI constructed a formal specification, defining the meaning of reliability in the context of flight control. A further series of specifications defined, in increasing detail, the design of SIFT down to pre- and post-conditions on Pascal code procedures. Mechanically checked mathematical proofs were constructed to demonstrate that the more detailed design specifications for SIFT do indeed imply the formal reliability requirement. An additional specification defined some of the assumptions made about SIFT by the Markov model, and further proofs were constructed to show that these assumptions, as expressed by that specification, did indeed follow from the more detailed design specifications for SIFT. This report provides an outline of the methodology used for this hierarchical specification and proof, and describes the various specifications and proofs performed.

Snow and Ice Applications of AVHRR in Polar Regions: Report of a Workshop

NASA Technical Reports Server (NTRS)

Steffen, K.; Bindschadler, R.; Casassa, G.; Comiso, J.; Eppler, D.; Fetterer, F.; Hawkins, J.; Key, J.; Rothrock, D.; Thomas, R.;

Japan-Specific Key Regulatory Aspects for Development of New Biopharmaceutical Drug Products.

PubMed

Desai, Kashappa Goud; Obayashi, Hirokazu; Colandene, James D; Nesta, Douglas P

2018-03-28

Japan represents the third largest pharmaceutical market in the world. Developing a new biopharmaceutical drug product for the Japanese market is a top business priority for global pharmaceutical companies while aligning with ethical drivers to treat more patients in need. Understanding Japan-specific key regulatory requirements is essential to achieve successful approvals. Understanding the full context of Japan-specific regulatory requirements/expectations is challenging to global pharmaceutical companies due to differences in language and culture. This article summarizes key Japan-specific regulatory aspects/requirements/expectations applicable to new drug development, approval, and postapproval phases. Formulation excipients should meet Japan compendial requirements with respect to the type of excipient, excipient grade, and excipient concentration. Preclinical safety assessments needed to support clinical phases I, II, and III development are summarized. Japanese regulatory authorities have taken appropriate steps to consider foreign clinical data, thereby enabling accelerated drug development and approval in Japan. Other important topics summarized in this article include: Japan new drug application-specific bracketing strategies for critical and noncritical aspects of the manufacturing process, regulatory requirements related to stability studies, release specifications and testing methods, standard processes involved in pre and postapproval inspections, management of postapproval changes, and Japan regulatory authority's consultation services available to global pharmaceutical companies. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

75 FR 37412 - Notice of Commission Meeting and Public Hearing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-29

.... business meeting include the dockets listed below: 1. City of Burlington, D-1973-046 CP-2. An application...--Kauneonga Lake, D-1974-196 CP-2. An application for the approval of an existing 0.6 million gallons per day... Waters. 3. Pottstown Borough Authority, D-1989-055 CP-2. An application for the renewal of an existing 12...

Mobile Phone Application Development for the Classroom

NASA Astrophysics Data System (ADS)

Lewis, P.; Oostra, D.; Crecelius, S.; Chambers, L. H.

2012-08-01

With smartphone sales currently surpassing laptop sales, it is hard not to think that these devices will have a place in the classroom. More specifically, with little to no monetary investment, classroom-centric mobile applications have the ability to suit the needs of teachers. Previously, programming such an item was a daunting task to the classroom teacher. But now, through the use of online visual tools, anyone has the ability to generate a mobile application to suit individual classroom needs. The "MY NASA DATA" (MND) project has begun work on such an application. Using online tools that are directed at the non-programmer, the team has developed two usable mobile applications ("apps") that fit right into the science classroom. The two apps generated include a cloud dichotomous key for cloud identification in the field, and an atmospheric science glossary to help with standardized testing key vocabulary and classroom assignments. Through the use of free online tools, teachers and students now have the ability to customize mobile applications to meet their individual needs. As an extension of the mobile applications, the MND team is planning web-based application programming interfaces (API's) that will be generated from data that is currently included in the MND Live Access Server. This will allow teachers and students to choose data sets that they want to include in the mobile application without having to populate the API themselves. Through the use of easy to understand online mobile app tutorials and MND data sets, teachers will have the ability to generate unit-specific mobile applications to further engage and empower students in the science classroom.

78 FR 76660 - Arts Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-18

... p.m. in room 716. Music (review of nominations): This meeting will be closed. Dates: January 14... Columbus Circle, 12th Floor, New York, NY 10019. Music (application review): This meeting will be virtual...

76 FR 20959 - Pacific Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... Review (STAR) Panel meeting that is open to the public. DATES: The meeting will be held Monday, May 2... meeting agenda may come before the STAR Panel for discussion, those issues may not be the subject of formal action during this meeting. STAR Panel action will be restricted to those issues specifically...

Distributed Two-Dimensional Fourier Transforms on DSPs with an Application for Phase Retrieval

NASA Technical Reports Server (NTRS)

Smith, Jeffrey Scott

2006-01-01

Many applications of two-dimensional Fourier Transforms require fixed timing as defined by system specifications. One example is image-based wavefront sensing. The image-based approach has many benefits, yet it is a computational intensive solution for adaptive optic correction, where optical adjustments are made in real-time to correct for external (atmospheric turbulence) and internal (stability) aberrations, which cause image degradation. For phase retrieval, a type of image-based wavefront sensing, numerous two-dimensional Fast Fourier Transforms (FFTs) are used. To meet the required real-time specifications, a distributed system is needed, and thus, the 2-D FFT necessitates an all-to-all communication among the computational nodes. The 1-D floating point FFT is very efficient on a digital signal processor (DSP). For this study, several architectures and analysis of such are presented which address the all-to-all communication with DSPs. Emphasis of this research is on a 64-node cluster of Analog Devices TigerSharc TS-101 DSPs.

Generalized Information Architecture for Managing Requirements in IBM?s Rational DOORS(r) Application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aragon, Kathryn M.; Eaton, Shelley M.; McCornack, Marjorie Turner

When a requirements engineering effort fails to meet expectations, often times the requirements management tool is blamed. Working with numerous project teams at Sandia National Laboratories over the last fifteen years has shown us that the tool is rarely the culprit; usually it is the lack of a viable information architecture with well- designed processes to support requirements engineering. This document illustrates design concepts with rationale, as well as a proven information architecture to structure and manage information in support of requirements engineering activities for any size or type of project. This generalized information architecture is specific to IBM's Rationalmore » DOORS (Dynamic Object Oriented Requirements System) software application, which is the requirements management tool in Sandia's CEE (Common Engineering Environment). This generalized information architecture can be used as presented or as a foundation for designing a tailored information architecture for project-specific needs. It may also be tailored for another software tool. Version 1.0 4 November 201« less

Computer animation for minimally invasive surgery: computer system requirements and preferred implementations

NASA Astrophysics Data System (ADS)

Pieper, Steven D.; McKenna, Michael; Chen, David; McDowall, Ian E.

1994-04-01

We are interested in the application of computer animation to surgery. Our current project, a navigation and visualization tool for knee arthroscopy, relies on real-time computer graphics and the human interface technologies associated with virtual reality. We believe that this new combination of techniques will lead to improved surgical outcomes and decreased health care costs. To meet these expectations in the medical field, the system must be safe, usable, and cost-effective. In this paper, we outline some of the most important hardware and software specifications in the areas of video input and output, spatial tracking, stereoscopic displays, computer graphics models and libraries, mass storage and network interfaces, and operating systems. Since this is a fairly new combination of technologies and a new application, our justification for our specifications are drawn from the current generation of surgical technology and by analogy to other fields where virtual reality technology has been more extensively applied and studied.

Optomechanical and thermal design of the Multi-Application Solar Telescope for USO

NASA Astrophysics Data System (ADS)

Denis, Stefan; Coucke, Pierre; Gabriel, Eric; Delrez, Christophe; Venkatakrishnan, Parameshwaran

2008-07-01

The Multi-Application Solar Telescope (MAST) is a 50 cm diameter class telescope to be installed on the Udaipur Solar Observatory's Island on the Lake Fatehsagar in Udaipur, India. It is dedicated to solar observation. The telescope is designed, manufactured, assembled and installed on-site by the belgian company AMOS SA for the Udaipur Solar Observatory (USO), an academic division of the Physical Research Laboratory (PRL) in India. Despite its limited size, the telescope is expected to be competitive with respect to worldwide large and costly projects thanks to its versatility regarding science goals and also thanks to its demanding optomechanical and thermal specification. This paper describes the optomechanical and thermal design of this telescope and presents solutions adopted by AMOS to meet the specific requirements. The optical configuration of the telescope is based on an afocal off-axis gregorian combination integrated on an Alt.-Az. mechanical mount, with a suite of flat folding mirrors to provide the required stationary collimated beam.

Redirecting T-cell specificity by introducing a tumor-specific chimeric antigen receptor

PubMed Central

Jena, Bipulendu; Dotti, Gianpietro

2010-01-01

Infusions of antigen-specific T cells have yielded therapeutic responses in patients with pathogens and tumors. To broaden the clinical application of adoptive immunotherapy against malignancies, investigators have developed robust systems for the genetic modification and characterization of T cells expressing introduced chimeric antigen receptors (CARs) to redirect specificity. Human trials are under way in patients with aggressive malignancies to test the hypothesis that manipulating the recipient and reprogramming T cells before adoptive transfer may improve their therapeutic effect. These examples of personalized medicine infuse T cells designed to meet patients' needs by redirecting their specificity to target molecular determinants on the underlying malignancy. The generation of clinical grade CAR+ T cells is an example of bench-to-bedside translational science that has been accomplished using investigator-initiated trials operating largely without industry support. The next-generation trials will deliver designer T cells with improved homing, CAR-mediated signaling, and replicative potential, as investigators move from the bedside to the bench and back again. PMID:20439624

En Route to the Clinic: Diagnostic Sequencing Applications Using the Ion Torrent (7th Annual SFAF Meeting, 2012)

ScienceCinema

Muzny, Donna

2018-01-15

Donna Muzny on "En route to the clinic: Diagnostic sequencing applications using the Ion Torrent" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

NASA and ESA Collaboration on Hexavalent Chrome Alternatives Pretreatments Only Interim Test Report

NASA Technical Reports Server (NTRS)

Kessel, Kurt R.

2015-01-01

NASA and ESA continue to search for an alternative to hexavalent chromium in coatings applications that meet their performance requirements in corrosion protection, cost, operability, and health and safety, while typically specifying that performance must be equal to or greater than existing systems. The overall objective of the collaborative effort between NASA TEERM and ESA is to test and evaluate coating systems (pretreatments, pretreatments with primer, and pretreatments with primer and topcoat) as replacements for hexavalent chrome coatings in aerospace applications. This objective will be accomplished by testing promising coatings identified from previous NASA, ESA, Department of Defense (DOD), and other project experience. Additionally, several new materials will be analyzed according to ESA-identified specifications.

Conducting Polymers for Neural Prosthetic and Neural Interface Applications

PubMed Central

2015-01-01

Neural interfacing devices are an artificial mechanism for restoring or supplementing the function of the nervous system lost as a result of injury or disease. Conducting polymers (CPs) are gaining significant attention due to their capacity to meet the performance criteria of a number of neuronal therapies including recording and stimulating neural activity, the regeneration of neural tissue and the delivery of bioactive molecules for mediating device-tissue interactions. CPs form a flexible platform technology that enables the development of tailored materials for a range of neuronal diagnostic and treatment therapies. In this review the application of CPs for neural prostheses and other neural interfacing devices are discussed, with a specific focus on neural recording, neural stimulation, neural regeneration, and therapeutic drug delivery. PMID:26414302

Driving with Bioptic Telescopes: Organizing a Research Agenda

PubMed Central

Owsley, Cynthia

2012-01-01

Being a licensed driver in the U. S. and many other countries facilitates health and well-being. Based on the vision standards in most states, individuals with worse than 20/40 visual acuity who desire licensure are denied through the usual licensure application process. However, over 40 states have bioptic telescope licensing programs where applicants can gain licensure contingent on meeting specific requirements. In spite of the existence of the bioptic telescope and these licensing programs since the 1970s, there has been little rigorous scientific study of this topic. Here I offer an organizing perspective for a research agenda on driving with bioptic telescopes, with the long term practical goal being to provide an evidence basis for licensure policies and training programs. PMID:22863791

76 FR 66075 - Center for Scientific Review Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-25

... applications. Place: National Institutes of Health, 6701 Rockledge Drive, Bethesda, MD 20892, (Virtual Meeting..., Bethesda, MD 20892, (Virtual Meeting). Contact Person: Michael H. Chaitin, PhD, Scientific Review Officer... Health, 6701 Rockledge Drive, Bethesda, MD 20892, (Virtual Meeting). Contact Person: John C Pugh, PhD...

77 FR 75198 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... INFORMATION section for meeting dates. ADDRESSES: The meetings will be held at the Library of Congress, Thomas... 37, 10117 Berlin, Germany. This meeting will discuss applications for the NEH/DFG Bilateral Digital Humanities Program, submitted to the Office of Digital Humanities. 2. Date: January 25, 2013. Time: 8:30 a.m...

7 CFR 1794.52 - Scoping meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Scoping meetings. 1794.52 Section 1794.52 Agriculture....52 Scoping meetings. (a) Both RUS and the applicant shall have a notice published which announces a public scoping meeting is to be conducted, either in conjunction with the notice of intent or as a...

24 CFR 108.25 - Compliance meeting.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Compliance meeting. 108.25 Section... COMPLIANCE PROCEDURES FOR AFFIRMATIVE FAIR HOUSING MARKETING § 108.25 Compliance meeting. (a) Scheduling meeting. If an applicant fails to comply with requirements under § 108.15 or § 108.20 or it appears that...

An Analysis of Aircraft Requirements to Meet United States Department of Agriculture Remote Sensing Goals

NASA Technical Reports Server (NTRS)

Arno, R. D.

1977-01-01

The survey needs of the U.S. De pa rtment of Agriculture are immense, ranging from individual crop coverage at specific intervals to general land use classification. The aggregate of all desirable resolutions and sensor types applicable to airborne platforms yields an annual survey coverage rate eqivalent to about 6 times the U.S. land area. An intermediate annual survey level equal to the U. S. area can meet all currently perceived crop survey needs and provide sample imagery over many other resource areas. This decreased survey level can be accomplished with one or two high altitude aircraft (e.g., U-2 or WB-57) or medium altitude aircraft ( such as the Learjet or Jetstar). Survey costs range from about 25 cents to several dollars per square nautical mile depending primarily on resolution requirements and the aircraft used.

Payload/orbiter contamination control requirement study: Spacelab configuration contamination study

NASA Technical Reports Server (NTRS)

Bareiss, L. E.; Hetrick, M. A.; Ress, E. B.; Strange, D. A.

1976-01-01

The assessment of the Spacelab carrier induced contaminant environment was continued, and the ability of Spacelab to meet established contamination control criteria for the space transportation system program was determined. The primary areas considered included: (1) updating, refining, and improving the Spacelab contamination computer model and contamination analysis methodology, (2) establishing the resulting adjusted induced environment predictions for comparison with the applicable criteria, (3) determining the Spacelab design and operational requirements necessary to meet the criteria, (4) conducting mission feasibility analyses of the combined Spacelab/Orbiter contaminant environment for specific proposed mission and payload mixes, and (5) establishing a preliminary Spacelab mission support plan as well as model interface requirements; A summary of those activities conducted to date with respect to the modelling, analysis, and predictions of the induced environment, including any modifications in approach or methodology utilized in the contamination assessment of the Spacelab carrier, was presented.

Advanced Launch System (ALS) actuation and power systems impact operability and cost

NASA Technical Reports Server (NTRS)

Sundberg, Gale R.

1990-01-01

To obtain the Advanced Launch System (ALS) primary goals of reduced costs and improved operability, there must be significant reductions in the launch operations and servicing requirements relative to current vehicle designs and practices. One of the primary methods for achieving these goals is by using vehicle electrical power system and controls for all actuation and avionics requirements. A brief status review of the ALS and its associated Advanced Development Program is presented to demonstrate maturation of those technologies that will help meet the overall operability and cost goals. The electric power and actuation systems are highlighted as a specific technology ready not only to meet the stringent ALS goals (cryogenic field valves and thrust vector controls with peak power demands to 75 hp), but also those of other launch vehicles, military and civilian aircraft, lunar/Martian vehicles, and a multitude of commercial applications.

Advanced Launch System (ALS): Electrical actuation and power systems improve operability and cost picture

NASA Technical Reports Server (NTRS)

Sundberg, Gale R.

1990-01-01

To obtain the Advanced Launch System (ALS) primary goals of reduced costs and improved operability, there must be significant reductions in the launch operations and servicing requirements relative to current vehicle designs and practices. One of the primary methods for achieving these goals is by using vehicle electrical power system and controls for all actuation and avionics requirements. A brief status review of the ALS and its associated Advanced Development Program is presented to demonstrate maturation of those technologies that will help meet the overall operability and cost goals. The electric power and actuation systems are highlighted as a specific technology ready not only to meet the stringent ALS goals (cryogenic field valves and thrust vector controls with peak power demands to 75 hp), but also those of other launch vehicles, military and civilian aircraft, lunar/Martian vehicles, and a multitude of commercial applications.

Controlling Healthcare Costs: Just Cost Effectiveness or "Just" Cost Effectiveness?

PubMed

Fleck, Leonard M

2018-04-01

Meeting healthcare needs is a matter of social justice. Healthcare needs are virtually limitless; however, resources, such as money, for meeting those needs, are limited. How then should we (just and caring citizens and policymakers in such a society) decide which needs must be met as a matter of justice with those limited resources? One reasonable response would be that we should use cost effectiveness as our primary criterion for making those choices. This article argues instead that cost-effectiveness considerations must be constrained by considerations of healthcare justice. The goal of this article will be to provide a preliminary account of how we might distinguish just from unjust or insufficiently just applications of cost-effectiveness analysis to some healthcare rationing problems; specifically, problems related to extraordinarily expensive targeted cancer therapies. Unconstrained compassionate appeals for resources for the medically least well-off cancer patients will be neither just nor cost effective.

Transonic Unsteady Aerodynamics and Aeroelasticity Held in San Diego, California on 7-11 October 1991 (L’Aerodynamique Instationnaire Transsonique el l’Aeroelasticite)

DTIC Science & Technology

1992-03-01

Specific goals were: these conditions was evident at the 1977 meeting in the shock oscillation calculations of Magnus and Yoshihara (Ref 7) and* Application... Magnus . for the minimum flutter speed at M = 0.96 and a favorable, - A case of self-excited shock oscillation about a 14% though unconservarive, agreement...Computational Test cases for Type 11 flows should be es- 7. Magnus , R. and Yoshihara, H.: The Transonic Oscillating tablished (unsteady separating and

Professional Advanced Research and Analysis

NASA Technical Reports Server (NTRS)

Coulman, George A.

1996-01-01

Reported here is a summary of studies examining some problems in an energy conversion system. Regenerative fuel cell systems have been suggested for future manned space missions, but to meet the needed specific power requirements substantial improvements in the state-of-the-art technologies are needed. Similar improvements are needed, with emphasis on cost reduction in addition to higher conversion efficiency, for fuel cell systems that have potential for terrestrial applications. Polymer Electrolyte Membrane (PEM) fuel cells have been identified as promising candidates for development that would lead to the desired cost reduction and increased efficiency.

Production of Reliable Flight Crucial Software: Validation Methods Research for Fault Tolerant Avionics and Control Systems Sub-Working Group Meeting

NASA Technical Reports Server (NTRS)

Dunham, J. R. (Editor); Knight, J. C. (Editor)

1982-01-01

The state of the art in the production of crucial software for flight control applications was addressed. The association between reliability metrics and software is considered. Thirteen software development projects are discussed. A short term need for research in the areas of tool development and software fault tolerance was indicated. For the long term, research in format verification or proof methods was recommended. Formal specification and software reliability modeling, were recommended as topics for both short and long term research.

Improved Transparent Conducting Oxides for Photovoltaics: Final Research Report, 1 May 1999--31 December 2002

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mason, T. O.; Chang, R. P. H.; Marks, T. J.

2003-10-01

This subcontract focused on next-generation transparent conducting oxides (TCOs) for improved PV performance. More specifically, there were two research foci: (1) improved Sn-based, n-type TCOs aimed at enhanced CdTe PV cell performance, and (2) novel Cu-based, p-type TCOs applicable to a variety of PV designs. The objective of the research under this subcontract was to identify, explore, evaluate, and develop future generations of photovoltaic technologies that can meet the long-term goal of producing low-cost electricity from sunlight.

Goddard Space Flight Center's Structural Dynamics Data Acquisition System

NASA Technical Reports Server (NTRS)

McLeod, Christopher

2004-01-01

Turnkey Commercial Off The Shelf (COTS) data acquisition systems typically perform well and meet most of the objectives of the manufacturer. The problem is that they seldom meet most of the objectives of the end user. The analysis software, if any, is unlikely to be tailored to the end users specific application; and there is seldom the chance of incorporating preferred algorithms to solve unique problems. Purchasing a customized system allows the end user to get a system tailored to the actual application, but the cost can be prohibitive. Once the system has been accepted, future changes come with a cost and response time that's often not workable. When it came time to replace the primary digital data acquisition system used in the Goddard Space Flight Center's Structural Dynamics Test Section, the decision was made to use a combination of COTS hardware and in-house developed software. The COTS hardware used is the DataMAX II Instrumentation Recorder built by R.C. Electronics Inc. and a desktop Pentium 4 computer system. The in-house software was developed using MATLAB from The MathWorks. This paper will describe the design and development of the new data acquisition and analysis system.

Mapping Application for Penguin Populations and Projected Dynamics (MAPPPD): Data and Tools for Dynamic Management and Decision Support

NASA Technical Reports Server (NTRS)

Humphries, G. R. W.; Naveen, R.; Schwaller, M.; Che-Castaldo, C.; McDowall, P.; Schrimpf, M.; Schrimpf, Michael; Lynch, H. J.

2017-01-01

The Mapping Application for Penguin Populations and Projected Dynamics (MAPPPD) is a web-based, open access, decision-support tool designed to assist scientists, non-governmental organizations and policy-makers working to meet the management objectives as set forth by the Commission for the Conservation of Antarctic Marine Living Resources (CCAMLR) and other components of the Antarctic Treaty System (ATS) (that is, Consultative Meetings and the ATS Committee on Environmental Protection). MAPPPD was designed specifically to complement existing efforts such as the CCAMLR Ecosystem Monitoring Program (CEMP) and the ATS site guidelines for visitors. The database underlying MAPPPD includes all publicly available (published and unpublished) count data on emperor, gentoo, Adelie) and chinstrap penguins in Antarctica. Penguin population models are used to assimilate available data into estimates of abundance for each site and year.Results are easily aggregated across multiple sites to obtain abundance estimates over any user-defined area of interest. A front end web interface located at www.penguinmap.com provides free and ready access to the most recent count and modelled data, and can act as a facilitator for data transfer between scientists and Antarctic stakeholders to help inform management decisions for the continent.

Manufacturability: from design to SPC limits through "corner-lot" characterization

NASA Astrophysics Data System (ADS)

Hogan, Timothy J.; Baker, James C.; Wesneski, Lisa; Black, Robert S.; Rothenbury, Dave

2004-12-01

Texas Instruments" Digital Micro-mirror Device, is used in a wide variety of optical display applications ranging from fixed and portable projectors to high-definition television (HDTV) to digital cinema projection systems. A new DMD pixel architecture, called "FTP", was designed and qualified by Texas Instruments DLPTMTM Group in 2003 to meet increased performance objectives for brightness and contrast ratio. Coordination between design, test and fabrication groups was required to balance pixel performance requirements and manufacturing capability. "Corner Lot" designed experiments (DOE) were used to verify "fabrication space" available for the pixel design. The corner lot technique allows confirmation of manufacturability projections early in the design/qualification cycle. Through careful design and analysis of the corner-lot DOE, a balance of critical dimension (cd) "budgets" is possible so that specification and process control limits can be established that meet both customer and factory requirements. The application of corner-lot DOE is illustrated in a case history of the DMD "FTP" pixel. The process for balancing test parameter requirements with multiple critical dimension budgets is shown. MEMS/MOEMS device design and fabrication can use similar techniques to achieve agressive design-to-qualification goals.

Manufacturability: from design to SPC limits through "corner-lot" characterization

NASA Astrophysics Data System (ADS)

Hogan, Timothy J.; Baker, James C.; Wesneski, Lisa; Black, Robert S.; Rothenbury, Dave

2005-01-01

Texas Instruments" Digital Micro-mirror Device, is used in a wide variety of optical display applications ranging from fixed and portable projectors to high-definition television (HDTV) to digital cinema projection systems. A new DMD pixel architecture, called "FTP", was designed and qualified by Texas Instruments DLPTMTM Group in 2003 to meet increased performance objectives for brightness and contrast ratio. Coordination between design, test and fabrication groups was required to balance pixel performance requirements and manufacturing capability. "Corner Lot" designed experiments (DOE) were used to verify "fabrication space" available for the pixel design. The corner lot technique allows confirmation of manufacturability projections early in the design/qualification cycle. Through careful design and analysis of the corner-lot DOE, a balance of critical dimension (cd) "budgets" is possible so that specification and process control limits can be established that meet both customer and factory requirements. The application of corner-lot DOE is illustrated in a case history of the DMD "FTP" pixel. The process for balancing test parameter requirements with multiple critical dimension budgets is shown. MEMS/MOEMS device design and fabrication can use similar techniques to achieve agressive design-to-qualification goals.

Goddard Space Flight Center's Structural Dynamics Data Acquisition System

NASA Technical Reports Server (NTRS)

McLeod, Christopher

2004-01-01

Turnkey Commercial Off The Shelf (COTS) data acquisition systems typically perform well and meet most of the objectives of the manufacturer. The problem is that they seldom meet most of the objectives of the end user. The analysis software, if any, is unlikely to be tailored to the end users specific application; and there is seldom the chance of incorporating preferred algorithms to solve unique problems. Purchasing a customized system allows the end user to get a system tailored to the actual application, but the cost can be prohibitive. Once the system has been accepted, future changes come with a cost and response time that's often not workable. When it came time to replace the primary digital data acquisition system used in the Goddard Space Flight Center's Structural Dynamics Test Section, the decision was made to use a combination of COTS hardware and in-house developed software. The COTS hardware used is the DataMAX II Instrumentation Recorder built by R.C. Electronics Inc. and a desktop Pentium 4 computer system. The in-house software was developed using MATLAF3 from The Mathworks. This paper will describe the design and development of the new data acquisition and analysis system.

Support for Students, Postdoctoral Fellows and Trainees to Attend Radiochemistry-­Related Symposia at Pacifichem 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilbur, Daniel Scott

This project was undertaken to meet the growing need for training personnel who will be involved in professional careers requiring knowledge of radiochemistry, such as those working in radionuclide production, and in biological, industrial, medical and environmental fields that use radionuclides in their work. The goal of the project was to provide financial assistance to students and trainees from academic and government institutions (US preferred) to attend selected radiochemistry-­related symposia at the Pacifichem 2015 meeting held in Honolulu, Hawaii in December 2015. The funding, meant to provide a portion of an awardee’s travel cost, was specifically directed at attendance tomore » the following symposia: #363, Isotope production-­ Providing Important Materials for Research and Applications; #215, Chemistry of Molecular Imaging, and #11, Chemistry for Development of Theranostic Radiopharmaceuticals. Those symposia were held December 16th (am & pm: #11, #363), December 17th (am: #11, #363; pm: #275) and December 18th (am & pm: #275). Pacifichem meetings are held every 5 years in Honolulu, Hawaii. The meetings are joint sponsored by a number of Chemistry Societies from Pacific Rim countries. The meetings are composed of a large number of symposia (>300) on a wide variety of topics, which make them similar to small meetings within the larger overall meeting. Therefore, attendance at the three symposia within Pacifichem 2015 was similar to attending a meeting focused entirely on radiochemistry-­related topics. To obtain the financial assistance, the student/trainee: (a) had to be an undergraduate student, graduate student or Postdoctoral Fellow in a physical science department or National Laboratory; (b) had to submit a letter from their supervisor indicating that he/she will be enrolled as a student/trainee at the time of the meeting, and were committed to attending the meeting; and (c) had to submit a resume or curriculum vitae along with a brief statement of why they wanted to attend the symposia. The Bursary Selection Committee reviewed the applications and selected awardees from the students that applied. Attendance of the students/trainees to the Pacifichem 2015 symposia provided information on the role radiochemistry and radionuclides can have in the development of future diagnostic and therapeutic agents. It is very likely that attending the symposia stimulated student interest in radiochemistry, and thus, will provide support for their decision to enter the field, or an impetus to make this technical area a career choice. This stimulus will ultimately help to fill the future workforce needs for professionals trained in radiochemistry needed within US, and in particular the Department of Energy.« less

26 CFR 48.4081-1 - Taxable fuel; definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... product other than finished gasoline. Kerosene means any liquid that meets the specifications for kerosene... in § 48.4082-1(b). A liquid meets the specifications for kerosene if it is one of the two grades of kerosene (No. 1-K and No. 2-K) covered by ASTM specification D 3699, or kerosene-type jet fuel covered by...

26 CFR 48.4081-1 - Taxable fuel; definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... product other than finished gasoline. Kerosene means any liquid that meets the specifications for kerosene... in § 48.4082-1(b). A liquid meets the specifications for kerosene if it is one of the two grades of kerosene (No. 1-K and No. 2-K) covered by ASTM specification D 3699, or kerosene-type jet fuel covered by...

Detection of small molecules with a flow immunosensor

NASA Technical Reports Server (NTRS)

Kusterbeck, Anne W.; Ligler, Frances S.

1991-01-01

We describe the development of an easy-to-use sensor with widespread applications for detecting small molecules. The flow immunosensor can analyze discrete samples in under one minute or continuously monitor a flowing stream for the presence of specific analytes. This detection system is extremely specific, and achieves a level of sensitivity which meets or exceeds the detection limits reported for rival assays. Because the system is also compact, transportable, and automated, it has the potential to impact diverse areas. For example, the flow immunosensor has successfully detected drugs of abuse and explosives, and may well address many of the needs of the environmental community with respect to continuous monitoring for pollutants. Efforts are underway to engineer a portable device in the field.

Proceedings of the 12th Annual Precise Time and Time Interval (PTTI) Applications and Planning Meeting

NASA Technical Reports Server (NTRS)

Wardrip, S. C. (Editor)

1981-01-01

The meeting gave PTTI managers, systems engineers, and program planners a transparent view of the state-of-the-art, an opportunity to express needs, a view of important future trends, and a review of relevant past accomplishments. The PTTI users were provided with new and useful applications, procedures, and techniques. Emphasis is placed on military applications and avionics.

An Open Source Extensible Smart Energy Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rankin, Linda

Aggregated distributed energy resources are the subject of much interest in the energy industry and are expected to play an important role in meeting our future energy needs by changing how we use, distribute and generate electricity. This energy future includes an increased amount of energy from renewable resources, load management techniques to improve resiliency and reliability, and distributed energy storage and generation capabilities that can be managed to meet the needs of the grid as well as individual customers. These energy assets are commonly referred to as Distributed Energy Resources (DER). DERs rely on a means to communicate informationmore » between an energy provider and multitudes of devices. Today DER control systems are typically vendor-specific, using custom hardware and software solutions. As a result, customers are locked into communication transport protocols, applications, tools, and data formats. Today’s systems are often difficult to extend to meet new application requirements, resulting in stranded assets when business requirements or energy management models evolve. By partnering with industry advisors and researchers, an implementation DER research platform was developed called the Smart Energy Framework (SEF). The hypothesis of this research was that an open source Internet of Things (IoT) framework could play a role in creating a commodity-based eco-system for DER assets that would reduce costs and provide interoperable products. SEF is based on the AllJoynTM IoT open source framework. The demonstration system incorporated DER assets, specifically batteries and smart water heaters. To verify the behavior of the distributed system, models of water heaters and batteries were also developed. An IoT interface for communicating between the assets and a control server was defined. This interface supports a series of “events” and telemetry reporting, similar to those defined by current smart grid communication standards. The results of this effort demonstrated the feasibility and application potential of using IoT frameworks for the creation of commodity-based DER systems. All of the identified commodity-based system requirements were met by the AllJoyn framework. By having commodity solutions, small vendors can enter the market and the cost of implementation for all parties is reduced. Utilities and aggregators can choose from multiple interoperable products reducing the risk of stranded assets. Based on this research it is recommended that interfaces based on existing smart grid communication protocol standards be created for these emerging IoT frameworks. These interfaces should be standardized as part of the IoT framework allowing for interoperability testing and certification. Similarly, IoT frameworks are introducing application level security. This type of security is needed for protecting application and platforms and will be important moving forward. Recommendations are that along with DER-based data model interfaces, platform and application security requirements also be prescribed when IoT devices support DER applications.« less

24 CFR 232.615 - Eligible borrowers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... intermediate care facility for which the Secretary of Health and Human Services has determined that the... intermediate care facility will meet not only the applicable fire safety requirements of HHS but will meet... application, a nursing home or intermediate care facility need not be providing such services if upon...

Proceedings of the Second Annual NASA Science Internet User Working Group Conference

NASA Technical Reports Server (NTRS)

Jackson, Lenore A. (Editor); Gary, J. Patrick (Editor)

1991-01-01

Copies of the agenda, list of attendees, meeting summaries, and all presentations and exhibit material are contained. Included are plenary sessions, exhibits of advanced networking applications, and user subgroup meetings on NASA Science Internet policy, networking, security, and user services and applications topics.

78 FR 14088 - Environmental Management Site-Specific Advisory Board, Savannah River Site

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-04

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Savannah River Site. The Federal Advisory Committee Act requires that public notice of this meeting be announced in the Federal Register.

42 CFR 37.93 - Approval of spirometry facilities.

Code of Federal Regulations, 2014 CFR

2014-10-01

... EXAMINATIONS SPECIFICATIONS FOR MEDICAL EXAMINATIONS OF COAL MINERS Spirometry Examinations § 37.93 Approval of...-approved facilities must meet the requirements specified in this subpart for the following activities... meet required specifications; collecting the respiratory assessment form; transmitting data to NIOSH...

A survey of advanced battery systems for space applications

NASA Technical Reports Server (NTRS)

Attia, Alan I.

1989-01-01

The results of a survey on advanced secondary battery systems for space applications are presented. The objectives were: to identify advanced battery systems capable of meeting the requirements of various types of space missions, with significant advantages over currently available batteries, to obtain an accurate estimate of the anticipated improvements of these advanced systems, and to obtain a consensus for the selection of systems most likely to yield the desired improvements. Few advanced systems are likely to exceed a specific energy of 150 Wh/kg and meet the additional requirements of safety and reliability within the next 15 years. The few that have this potential are: (1) regenerative fuel cells, both alkaline and solid polymer electrolyte (SPE) types for large power systems; (2) lithium-intercalatable cathodes, particularly the metal ozides intercalatable cathodes (MnO2 or CoO2), with applications limited to small spacecrafts requiring limited cycle life and low power levels; (3) lithium molten salt systems (e.g., LiAl-FeS2); and (4) Na/beta Alumina/Sulfur or metal chlorides cells. Likely technological advances that would enhance the performance of all the above systems are also identified, in particular: improved bifunctional oxygen electrodes; improved manufacturing technology for thin film lithium electrodes in combination with polymeric electrolytes; improved seals for the lithium molten salt cells; and improved ceramics for sodium/solid electrolyte cells.

Sport-specific nutrition: practical strategies for team sports.

PubMed

Holway, Francis E; Spriet, Lawrence L

2011-01-01

Implementation of a nutrition programme for team sports involves application of scientific research together with the social skills necessary to work with a sports medicine and coaching staff. Both field and court team sports are characterized by intermittent activity requiring a heavy reliance on dietary carbohydrate sources to maintain and replenish glycogen. Energy and substrate demands are high during pre-season training and matches, and moderate during training in the competitive season. Dietary planning must include enough carbohydrate on a moderate energy budget, while also meeting protein needs. Strength and power team sports require muscle-building programmes that must be accompanied by adequate nutrition, and simple anthropometric measurements can help the nutrition practitioner monitor and assess body composition periodically. Use of a body mass scale and a urine specific gravity refractometer can help identify athletes prone to dehydration. Sports beverages and caffeine are the most common supplements, while opinion on the practical effectiveness of creatine is divided. Late-maturing adolescent athletes become concerned about gaining size and muscle, and assessment of maturity status can be carried out with anthropometric procedures. An overriding consideration is that an individual approach is needed to meet each athlete's nutritional needs.

Perspective on the combined use of an independent transgenic sexing and a multifactorial reproductive sterility system to avoid resistance development against transgenic Sterile Insect Technique approaches

PubMed Central

2014-01-01

Background The Sterile Insect Technique (SIT) is an accepted species-specific genetic control approach that acts as an insect birth control measure, which can be improved by biotechnological engineering to facilitate its use and widen its applicability. First transgenic insects carrying a single killing system have already been released in small scale trials. However, to evade resistance development to such transgenic approaches, completely independent ways of transgenic killing should be established and combined. Perspective Most established transgenic sexing and reproductive sterility systems are based on the binary tTA expression system that can be suppressed by adding tetracycline to the food. However, to create 'redundant killing' an additional independent conditional expression system is required. Here we present a perspective on the use of a second food-controllable binary expression system - the inducible Q system - that could be used in combination with site-specific recombinases to generate independent transgenic killing systems. We propose the combination of an already established transgenic embryonic sexing system to meet the SIT requirement of male-only releases based on the repressible tTA system together with a redundant male-specific reproductive sterility system, which is activated by Q-system controlled site-specific recombination and is based on a spermatogenesis-specifically expressed endonuclease acting on several species-specific target sites leading to chromosome shredding. Conclusion A combination of a completely independent transgenic sexing and a redundant reproductive male sterility system, which do not share any active components and mediate the induced lethality by completely independent processes, would meet the 'redundant killing' criteria for suppression of resistance development and could therefore be employed in large scale long-term suppression programs using biotechnologically enhanced SIT. PMID:25471733

Experiment Software and Projects on the Web with VISPA

NASA Astrophysics Data System (ADS)

Erdmann, M.; Fischer, B.; Fischer, R.; Geiser, E.; Glaser, C.; Müller, G.; Rieger, M.; Urban, M.; von Cube, R. F.; Welling, C.

2017-10-01

The Visual Physics Analysis (VISPA) project defines a toolbox for accessing software via the web. It is based on latest web technologies and provides a powerful extension mechanism that enables to interface a wide range of applications. Beyond basic applications such as a code editor, a file browser, or a terminal, it meets the demands of sophisticated experiment-specific use cases that focus on physics data analyses and typically require a high degree of interactivity. As an example, we developed a data inspector that is capable of browsing interactively through event content of several data formats, e.g., MiniAOD which is utilized by the CMS collaboration. The VISPA extension mechanism can also be used to embed external web-based applications that benefit from dynamic allocation of user-defined computing resources via SSH. For example, by wrapping the JSROOT project, ROOT files located on any remote machine can be inspected directly through a VISPA server instance. We introduced domains that combine groups of users and role-based permissions. Thereby, tailored projects are enabled, e.g. for teaching where access to student’s homework is restricted to a team of tutors, or for experiment-specific data that may only be accessible for members of the collaboration. We present the extension mechanism including corresponding applications and give an outlook onto the new permission system.

78 FR 27281 - Qualification of Drivers; Exemption Applications; Vision

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-09

... Federal Motor Carrier Safety Regulations. They are unable to meet the vision requirement in one eye for...) in interstate commerce without meeting the prescribed vision requirement in one eye. If granted, the.... Qualifications of Applicants Allan L. Anthony Mr. Anthony, age 54, has had refractive amblyopia in his left eye...

75 FR 41551 - Meetings of Humanities Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

... Psychology in Fellowships, submitted to the Division of Research Programs at the May 4, 2010 deadline. 21... applications for Advanced Social Science Research on Japan in Fellowships, submitted to the Division of...:30 a.m. to 5 p.m. Room: 415. Program: This meeting will review applications for Social Sciences and...

25 CFR 224.58 - What is an application consultation meeting?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is an application consultation meeting? 224.58 Section 224.58 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ENERGY AND MINERALS TRIBAL ENERGY RESOURCE AGREEMENTS UNDER THE INDIAN TRIBAL ENERGY DEVELOPMENT AND SELF DETERMINATION ACT...

12 CFR 725.17 - Applications for extensions of credit.

Code of Federal Regulations, 2010 CFR

2010-01-01

... NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.17 Applications for extensions of credit. (a) A Regular member may apply for a Facility advance to meet its liquidity needs by filing an... Agent by its member natural person credit unions for pending loans to meet liquidity needs; or (ii...

78 FR 45518 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-29

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 10611 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-14

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Portsmouth. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 46330 - Environmental Management Site-Specific Advisory Board, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-31

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Nevada. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 53135 - Environmental Management Site-Specific Advisory Board, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-28

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Nevada. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 28368 - Environmental Management Site-Specific Advisory Board, Hanford

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Hanford. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 64932 - Environmental Management Site-Specific Advisory Board, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-30

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Nevada. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 2713 - Environmental Management Site-Specific Advisory Board, Hanford

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-19

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Hanford. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 7767 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 25064 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-29

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 39234 - Environmental Management Site-Specific Advisory Board, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-02

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Nevada. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 78952 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 54460 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-04

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 22255 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-15

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Portsmouth. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 4139 - Environmental Management Site-Specific Advisory Board, Hanford

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Hanford. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 50488 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-21

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Portsmouth. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 36543 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Portsmouth. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 17192 - Environmental Management Site-Specific Advisory Board, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-20

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Nevada. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 23760 - Environmental Management Site-Specific Advisory Board, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-22

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Nevada. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 16021 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-19

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Portsmouth. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 32640 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-31

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

76 FR 70121 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Portsmouth. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 49738 - Environmental Management Site-Specific Advisory Board, Hanford

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Hanford. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 38969 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 24694 - Environmental Management Site-Specific Advisory Board, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Nevada. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 16021 - Environmental Management Site-Specific Advisory Board, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-19

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Nevada. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 22566 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-16

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Portsmouth. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 63300 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-16

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Portsmouth. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

76 FR 64329 - Environmental Management Site-Specific Advisory Board, Portsmouth

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Portsmouth. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 28207 - Environmental Management Site-Specific Advisory Board, Hanford

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-14

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Hanford. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 73519 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-06

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 26273 - President's Council of Advisors on Science and Technology (PCAST)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-03

... will be available within one week of the meeting. Questions about the meeting should be directed to Dr... Officer Team Agenda 2012, and two information technology applications--IBM's Watson Project and Google's... . Closed Portion of the Meeting: PCAST may hold a closed meeting of approximately one hour with the...

76 FR 26775 - Advisory Committee on Reactor Safeguards Meeting of the ACRS Subcommittee on EPR; Cancellation to...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

... NUCLEAR REGULATORY COMMISSION Advisory Committee on Reactor Safeguards Meeting of the ACRS Subcommittee on EPR; Cancellation to May 11, 2011, ACRS Meeting-- Federal Register Notice The Federal Register Notice for the ACRS Subcommittee Meeting on the design certification application review of the U.S...

33 CFR 115.60 - Procedures for handling applications for bridge permits.

Code of Federal Regulations, 2013 CFR

2013-07-01

... notifies the public that it has been received and continues its processing. A copy of this notification... granted. (b) Public meeting. (1) Public meetings will be held when there are substantial issues concerning... public meeting will be published in the Federal Register. Notice of the meeting is also mailed to State...

33 CFR 115.60 - Procedures for handling applications for bridge construction permits.

Code of Federal Regulations, 2012 CFR

2012-07-01

... defective, the District Commander notifies the public that it has been received and continues its processing..., additional time will be granted. (b) Public meeting. (1) Public meetings will be held when there are... navigation. (2) Notice of the public meeting will be published in the Federal Register. Notice of the meeting...

33 CFR 115.60 - Procedures for handling applications for bridge permits.

Code of Federal Regulations, 2014 CFR

2014-07-01

... notifies the public that it has been received and continues its processing. A copy of this notification... granted. (b) Public meeting. (1) Public meetings will be held when there are substantial issues concerning... public meeting will be published in the Federal Register. Notice of the meeting is also mailed to State...

75 FR 16487 - Center for Substance Abuse Treatment; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... Center for Substance Abuse Treatment; Notice of Meeting Pursuant to Public Law 92-463, notice is hereby... Substance Abuse Treatment (CSAT) National Advisory Council on April 21, 2010. A portion of the meeting is... evaluation of grant applications. Therefore, this portion of the meeting will be closed to the public as...

77 FR 77073 - York Haven Power Company, LLC; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... Company, LLC; Notice of Meeting On Wednesday, January 9, 2013, Commission staff will meet with York Haven Power Company, LLC (applicant) in Washington, DC. The purpose of the meeting is to discuss the required... begin at 10 a.m. at the Federal Energy Regulatory Commission headquarters building located at 888 First...

Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices.

PubMed

Watanabe, Masayoshi; Thomas, Morgan L; Zhang, Shiguo; Ueno, Kazuhide; Yasuda, Tomohiro; Dokko, Kaoru

2017-05-24

Ionic liquids (ILs) are liquids consisting entirely of ions and can be further defined as molten salts having melting points lower than 100 °C. One of the most important research areas for IL utilization is undoubtedly their energy application, especially for energy storage and conversion materials and devices, because there is a continuously increasing demand for clean and sustainable energy. In this article, various application of ILs are reviewed by focusing on their use as electrolyte materials for Li/Na ion batteries, Li-sulfur batteries, Li-oxygen batteries, and nonhumidified fuel cells and as carbon precursors for electrode catalysts of fuel cells and electrode materials for batteries and supercapacitors. Due to their characteristic properties such as nonvolatility, high thermal stability, and high ionic conductivity, ILs appear to meet the rigorous demands/criteria of these various applications. However, for further development, specific applications for which these characteristic properties become unique (i.e., not easily achieved by other materials) must be explored. Thus, through strong demands for research and consideration of ILs unique properties, we will be able to identify indispensable applications for ILs.

Spatially selective assembly of quantum dot light emitters in an LED using engineered peptides.

PubMed

Demir, Hilmi Volkan; Seker, Urartu Ozgur Safak; Zengin, Gulis; Mutlugun, Evren; Sari, Emre; Tamerler, Candan; Sarikaya, Mehmet

2011-04-26

Semiconductor nanocrystal quantum dots are utilized in numerous applications in nano- and biotechnology. In device applications, where several different material components are involved, quantum dots typically need to be assembled at explicit locations for enhanced functionality. Conventional approaches cannot meet these requirements where assembly of nanocrystals is usually material-nonspecific, thereby limiting the control of their spatial distribution. Here we demonstrate directed self-assembly of quantum dot emitters at material-specific locations in a color-conversion LED containing several material components including a metal, a dielectric, and a semiconductor. We achieve a spatially selective immobilization of quantum dot emitters by using the unique material selectivity characteristics provided by the engineered solid-binding peptides as smart linkers. Peptide-decorated quantum dots exhibited several orders of magnitude higher photoluminescence compared to the control groups, thus, potentially opening up novel ways to advance these photonic platforms in applications ranging from chemical to biodetection.

Functionalization of vertically aligned carbon nanotubes.

PubMed

Van Hooijdonk, Eloise; Bittencourt, Carla; Snyders, Rony; Colomer, Jean-François

2013-01-01

This review focuses and summarizes recent studies on the functionalization of carbon nanotubes oriented perpendicularly to their substrate, so-called vertically aligned carbon nanotubes (VA-CNTs). The intrinsic properties of individual nanotubes make the VA-CNTs ideal candidates for integration in a wide range of devices, and many potential applications have been envisaged. These applications can benefit from the unidirectional alignment of the nanotubes, the large surface area, the high carbon purity, the outstanding electrical conductivity, and the uniformly long length. However, practical uses of VA-CNTs are limited by their surface characteristics, which must be often modified in order to meet the specificity of each particular application. The proposed approaches are based on the chemical modifications of the surface by functionalization (grafting of functional chemical groups, decoration with metal particles or wrapping of polymers) to bring new properties or to improve the interactions between the VA-CNTs and their environment while maintaining the alignment of CNTs.

Functionalization of vertically aligned carbon nanotubes

PubMed Central

Snyders, Rony; Colomer, Jean-François

2013-01-01

Summary This review focuses and summarizes recent studies on the functionalization of carbon nanotubes oriented perpendicularly to their substrate, so-called vertically aligned carbon nanotubes (VA-CNTs). The intrinsic properties of individual nanotubes make the VA-CNTs ideal candidates for integration in a wide range of devices, and many potential applications have been envisaged. These applications can benefit from the unidirectional alignment of the nanotubes, the large surface area, the high carbon purity, the outstanding electrical conductivity, and the uniformly long length. However, practical uses of VA-CNTs are limited by their surface characteristics, which must be often modified in order to meet the specificity of each particular application. The proposed approaches are based on the chemical modifications of the surface by functionalization (grafting of functional chemical groups, decoration with metal particles or wrapping of polymers) to bring new properties or to improve the interactions between the VA-CNTs and their environment while maintaining the alignment of CNTs. PMID:23504581

Variable Generation Power Forecasting as a Big Data Problem

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haupt, Sue Ellen; Kosovic, Branko

To blend growing amounts of power from renewable resources into utility operations requires accurate forecasts. For both day ahead planning and real-time operations, the power from the wind and solar resources must be predicted based on real-time observations and a series of models that span the temporal and spatial scales of the problem, using the physical and dynamical knowledge as well as computational intelligence. Accurate prediction is a Big Data problem that requires disparate data, multiple models that are each applicable for a specific time frame, and application of computational intelligence techniques to successfully blend all of the model andmore » observational information in real-time and deliver it to the decision makers at utilities and grid operators. This paper describes an example system that has been used for utility applications and how it has been configured to meet utility needs while addressing the Big Data issues.« less

The ‘nanobig rod’ class of gold nanorods: optimized dimensions for improved in vivo therapeutic and imaging efficacy

NASA Astrophysics Data System (ADS)

Ungureanu, Constantin; Koning, Gerben A.; van Leeuwen, Ton G.; Manohar, Srirang

2013-05-01

Currently, gold nanorods can be synthesized in a wide range of sizes. However, for the intended biological applications gold nanorods with approximate dimensions 50 nm × 15 nm are used. We investigate by computer simulation the effect of particle dimensions on the optical and thermal properties in the context of the specific applications of photoacoustic imaging. In addition we discuss the influence of particle size in overcoming the following biophysical barriers when administrated in vivo: extravasation, avoidance of uptake by organs of the reticuloendothelial system, penetration through the interstitium, binding capability and uptake by the target cells. Although more complex biological influences can be introduced in future analysis, the present work illustrates that larger gold nanorods, designated by us as ‘nanobig rods’, may perform better at meeting the requirements for successful in vivo applications compared to their smaller counterparts, which are conventionally used.

The 'nanobig rod' class of gold nanorods: optimized dimensions for improved in vivo therapeutic and imaging efficacy.

PubMed

Ungureanu, Constantin; Koning, Gerben A; van Leeuwen, Ton G; Manohar, Srirang

2013-05-31

Currently, gold nanorods can be synthesized in a wide range of sizes. However, for the intended biological applications gold nanorods with approximate dimensions 50 nm × 15 nm are used. We investigate by computer simulation the effect of particle dimensions on the optical and thermal properties in the context of the specific applications of photoacoustic imaging. In addition we discuss the influence of particle size in overcoming the following biophysical barriers when administrated in vivo: extravasation, avoidance of uptake by organs of the reticuloendothelial system, penetration through the interstitium, binding capability and uptake by the target cells. Although more complex biological influences can be introduced in future analysis, the present work illustrates that larger gold nanorods, designated by us as 'nanobig rods', may perform better at meeting the requirements for successful in vivo applications compared to their smaller counterparts, which are conventionally used.

Variable Generation Power Forecasting as a Big Data Problem

DOE PAGES

Haupt, Sue Ellen; Kosovic, Branko

2016-10-10

To blend growing amounts of power from renewable resources into utility operations requires accurate forecasts. For both day ahead planning and real-time operations, the power from the wind and solar resources must be predicted based on real-time observations and a series of models that span the temporal and spatial scales of the problem, using the physical and dynamical knowledge as well as computational intelligence. Accurate prediction is a Big Data problem that requires disparate data, multiple models that are each applicable for a specific time frame, and application of computational intelligence techniques to successfully blend all of the model andmore » observational information in real-time and deliver it to the decision makers at utilities and grid operators. This paper describes an example system that has been used for utility applications and how it has been configured to meet utility needs while addressing the Big Data issues.« less

XBoard: A Framework for Integrating and Enhancing Collaborative Work Practices

NASA Technical Reports Server (NTRS)

Shab, Ted

2006-01-01

Teams typically collaborate in different modes including face-to-face meetings, meetings that are synchronous (i. e. require parties to participate at the same time) but distributed geographically, and meetings involving asynchronously working on common tasks at different times. The XBoard platform was designed to create an integrated environment for creating applications that enhance collaborative work practices. Specifically, it takes large, touch-screen enabled displays as the starting point for enhancing face-to-face meetings by providing common facilities such as whiteboarding/electronic flipcharts, laptop projection, web access, screen capture and content distribution. These capabilities are built upon by making these functions inherently distributed by allowing these sessions to be easily connected between two or more systems at different locations. Finally, an information repository is integrated into the functionality to provide facilities for work practices that involve work being done at different times, such as reports that span different shifts. The Board is designed to be extendible allowing customization of both the general functionality and by adding new functionality to the core facilities by means of a plugin architecture. This, in essence, makes it a collaborative framework for extending or integrating work practices for different mission scenarios. XBoard relies heavily on standards such as Web Services and SVG, and is built using predominately Java and well-known open-source products such as Apache and Postgres. Increasingly, organizations are geographically dispersed, and rely on "virtual teams" that are assembled from a pool of various partner organizations. These organizations often have different infrastructures of applications and workflows. The XBoard has been designed to be a good partner in these situations, providing the flexibility to integrate with typical legacy applications while providing a standards-based infrastructure that is readily accepted by most organizations. The XBoard has been used on the Mars Exploration Rovers mission at JPL, and is currently being used or considered for use in pilot projects at Johnson Space Center (JSC) Mission Control, the University of Arizona Lunar and Planetav Laboratory (Phoenix Mars Lander), and MBART (Monterey Bay Aquarium Research Institute).

Software Analyzes Complex Systems in Real Time

NASA Technical Reports Server (NTRS)

2008-01-01

Expert system software programs, also known as knowledge-based systems, are computer programs that emulate the knowledge and analytical skills of one or more human experts, related to a specific subject. SHINE (Spacecraft Health Inference Engine) is one such program, a software inference engine (expert system) designed by NASA for the purpose of monitoring, analyzing, and diagnosing both real-time and non-real-time systems. It was developed to meet many of the Agency s demanding and rigorous artificial intelligence goals for current and future needs. NASA developed the sophisticated and reusable software based on the experience and requirements of its Jet Propulsion Laboratory s (JPL) Artificial Intelligence Research Group in developing expert systems for space flight operations specifically, the diagnosis of spacecraft health. It was designed to be efficient enough to operate in demanding real time and in limited hardware environments, and to be utilized by non-expert systems applications written in conventional programming languages. The technology is currently used in several ongoing NASA applications, including the Mars Exploration Rovers and the Spacecraft Health Automatic Reasoning Pilot (SHARP) program for the diagnosis of telecommunication anomalies during the Neptune Voyager Encounter. It is also finding applications outside of the Space Agency.

75 FR 44818 - Advisory Committee on Reactor Safeguards (ACRS): Meeting of the ACRS Subcommittee on Plant...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-29

... Renewal Application and the associated Safety Evaluation Report (SER) with open items prepared by the..., (74 FR 58268-58269). Detailed meeting agendas and meeting transcripts are available on the NRC Web...

77 FR 32169 - SJI Board of Directors Meeting, Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-31

... meeting is to consider grant applications for the 3rd quarter of FY 2012, and other business. All portions of this meeting are open to the public. ADDRESSES: Westin Hotel, 1900 5th Ave., Seattle, WA 98101...

Requirements for AMLCDs in U.S. military applications

NASA Astrophysics Data System (ADS)

Hopper, Darrel G.; Desjardins, Daniel D.

1995-06-01

Flat panel displays are fast becoming a significant source of more defense for less money. Military instruments have begun to use color active matrix liquid crystal displays (AMLCDs). This is the beginning of a significant transition from electromechanical, CRT. dichroic LCD, and electroluminescent display designs to the AMLCD designs. We have the opportunity with this new technology to establish common products capable of meeting user requirements for sunlight-readable, color and grayscale capable, high-sharpness high-pixel count, flat panel displays for military applications. The Wright Laboratory is leading the development of recommended best practice, draft guidance standard, and performance specifications for this new generation, the flat panel cockpit display generation, of display modules based on requirements for U.S. military aircraft and ground combat human system interfaces. These requirements are similar in many regards to those in both the civil aviation and automotive industries; accordingly, commonality with these civil applications is incorporated where possible, against the requirements for military combat applications. The performance requirement may be achieved by two approaches: militarization of displays made to low requirements of a large volume civil products manufacturer like Sharp or integration of displays made to high requirements by a niche market commercial vendor, like Optical Imaging Systems, Litton Systems Limited, ImageQuest Inc., and Planar Advanced Inc. teamed with Xerox PARC and Standish Industries. [Note that the niche market companies listed are commercial off-the shelf vendors, albeit for high requirement low volume customers.] Given that the performance specifications can be met for a particular military product by either approach, the choice is based on life cycle cost and a thin analysis based on initial costs alone is not acceptable as it ignores the fact that military product life cycles and procurements are 20-60 years compared to 1.5 years for civil products. Thus far there is no convincing evidence that the large volume commercial product approach for combat systems will meet the combat performance specification or be cheaper from a life cycle cost perspective. National and economic security requirements require some military/avionic-grade AMLCD production domestically (i.e. in the U.S. and/or Canada). Examples of AMLCD demand and performance requirements in U.S. military systems are provided.

Water technology for specific water usage.

PubMed

Frimmel, Fritz H

2003-01-01

Water is the basis for life and culture. In addition to the availability of water its quality has become a major issue in industrialized areas and in developing countries as well. Water usage has to be seen as part of the hydrological cycle. As a consequence water management has to be sustainable. The aim of the contribution is to give water usage oriented quality criteria and to focus on the technical means to achieve them. Water is used for many purposes, ranging from drinking and irrigation to a broad variety of technical processes. Most applications need specific hygienic, chemical and/or physical properties. To meet these demands separation and reaction principles are applied. The reuse of water and the application of water treatment with little or no waste and by-product formation is the way to go. Membrane separation and advanced oxidation including catalytic reactions are promising methods that apply natural processes in sustainable technical performance. Thus elimination of specific water constituents (e.g. salts and metals, microorganisms) and waste water cleaning (e.g. pollutants, nutrients and organic water) can be done efficiently. Learning from nature and helping nature with appropriate technology is a convincing strategy for sustainable water management.

78 FR 26635 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-07

...On April 29, 2013, the Department of Energy (DOE) published a notice of open meeting announcing a meeting on May 16, 2013 of the Environmental Management Site-Specific Advisory Board, Paducah (78 FR 25064). This document makes a correction to that notice.

77 FR 31837 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-30

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. No. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 49442 - Environmental Management Site-Specific Advisory Board, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-16

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Nevada. The Federal Advisory Committee Act (Pub. L. No. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 16260 - Environmental Management Site-Specific Advisory Board, Paducah

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-14

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. No. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 64112 - Environmental Management Site-Specific Advisory Board, Hanford

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Hanford. The Federal Advisory Committee Act (Pub. L. No. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

A Methodological Inter-Comparison of Gridded Meteorological Products

NASA Astrophysics Data System (ADS)

Newman, A. J.; Clark, M. P.; Longman, R. J.; Giambelluca, T. W.; Arnold, J.

2017-12-01

Here we present a gridded meteorology inter-comparison using the state of Hawaíi as a testbed. This inter-comparison is motivated by two general goals: 1) the broad user community of gridded observation based meteorological fields should be aware of inter-product differences and the reasons they exist, which allows users to make informed choices on product selection to best meet their specific application(s); 2) we want to demonstrate the utility of inter-comparisons to meet the first goal, yet highlight that they are limited to mostly generic statements regarding attribution of differences that limits our understanding of these complex algorithms and obscures future research directions. Hawaíi is a useful testbed because it is a meteorologically complex region with well-known spatial features that are tied to specific physical processes (e.g. the trade wind inversion). From a practical standpoint, there are now several monthly climatological and daily precipitation and temperature datasets available that are being used for impact modeling. General conclusions that have emerged are: 1) differences in input station data significantly influence product differences; 2) prediction of precipitation occurrence is crucial across multiple metrics; 3) derived temperature statistics (e.g. diurnal temperature range) may have large spatial differences across products; and 4) attribution of differences to methodological choices is difficult and may limit the outcomes of these inter-comparisons, particularly from a development viewpoint. Thus, we want to continue to move the community towards frameworks that allow for multiple options throughout the product generation chain and allow for more systematic testing.

Development of a framework for international certification by OIE of diagnostic tests validated as fit for purpose.

PubMed

Wright, P; Edwards, S; Diallo, A; Jacobson, R

2006-01-01

Historically, the OIE has focused on test methods applicable to trade and the international movement of animals and animal products. With its expanding role as the World Organisation for Animal Health, the OIE has recognised the need to evaluate test methods relative to specific diagnostic applications other than trade. In collaboration with its international partners, the OIE solicited input from experts through consultants' meetings on the development of guidelines for validation and certification of diagnostic assays for infectious animal diseases. Recommendations from the first meeting were formally adopted and have subsequently been acted upon by the OIE. A validation template has been developed that specifically requires a test to be fit or suited for its intended purpose (e.g. as a screening or a confirmatory test). This is a key criterion for validation. The template incorporates four distinct stages of validation, each of which has bearing on the evaluation of fitness for purpose. The OIE has just recently created a registry for diagnostic tests that fulfil these validation requirements. Assay developers are invited to submit validation dossiers to the OIE for evaluation by a panel of experts. Recognising that validation is an incremental process, tests methods achieving at least the first stages of validation may be provisionally accepted. To provide additional confidence in assay performance, the OIE, through its network of Reference Laboratories, has embarked on the development of evaluation panels. These panels would contain specially selected test samples that would assist in verifying fitness for purpose.

Development of a framework for international certification by the OIE of diagnostic tests validated as fit for purpose.

PubMed

Wright, P; Edwards, S; Diallo, A; Jacobson, R

2007-01-01

Historically, the OIE has focussed on test methods applicable to trade and the international movement of animals and animal products. With its expanding role as the World Organisation for Animal Health, the OIE has recognised the need to evaluate test methods relative to specific diagnostic applications other than trade. In collaboration with its international partners, the OIE solicited input from experts through consultants meetings on the development of guidelines for validation and certification of diagnostic assays for infectious animal diseases. Recommendations from the first meeting were formally adopted and have subsequently been acted upon by the OIE. A validation template has been developed that specifically requires a test to be fit or suited for its intended purpose (e.g. as a screening or a confirmatory test). This is a key criterion for validation. The template incorporates four distinct stages of validation, each of which has bearing on the evaluation of fitness for purpose. The OIE has just recently created a registry for diagnostic tests that fulfil these validation requirements. Assay developers are invited to submit validation dossiers to the OIE for evaluation by a panel of experts. Recognising that validation is an incremental process, tests methods achieving at least the first stages of validation may be provisionally accepted. To provide additional confidence in assay performance, the OIE, through its network of Reference Laboratories, has embarked on the development of evaluation panels. These panels would contain specially selected test samples that would assist in verifying fitness for purpose.

When biomolecules meet graphene: from molecular level interactions to material design and applications.

PubMed

Li, Dapeng; Zhang, Wensi; Yu, Xiaoqing; Wang, Zhenping; Su, Zhiqiang; Wei, Gang

2016-12-01

Graphene-based materials have attracted increasing attention due to their atomically-thick two-dimensional structures, high conductivity, excellent mechanical properties, and large specific surface areas. The combination of biomolecules with graphene-based materials offers a promising method to fabricate novel graphene-biomolecule hybrid nanomaterials with unique functions in biology, medicine, nanotechnology, and materials science. In this review, we focus on a summarization of the recent studies in functionalizing graphene-based materials using different biomolecules, such as DNA, peptides, proteins, enzymes, carbohydrates, and viruses. The different interactions between graphene and biomolecules at the molecular level are demonstrated and discussed in detail. In addition, the potential applications of the created graphene-biomolecule nanohybrids in drug delivery, cancer treatment, tissue engineering, biosensors, bioimaging, energy materials, and other nanotechnological applications are presented. This review will be helpful to know the modification of graphene with biomolecules, understand the interactions between graphene and biomolecules at the molecular level, and design functional graphene-based nanomaterials with unique properties for various applications.

Predicate calculus, artificial intelligence, and workers' compensation.

PubMed

Harber, P; McCoy, J M

1989-05-01

Application of principles of predicate calculus (PC) and artificial intelligence (AI) search methods to occupational medicine can meet several goals. First, they can improve understanding of the diagnostic process and recognition of the sources of uncertainty in knowledge and in case specific information. Second, PC provides a rational means of resolving differences in conclusion based upon the same premises. Third, understanding of these principles allows separation of knowledge (facts) from the process by which they are used and therefore facilitates development of AI-based expert systems. Application of PC to recognizing causation of pulmonary fibrosis is demonstrated in this paper, providing a method that can be generalized to other problems in occupational medicine. Application of PC and understanding of AI search routines may be particularly applicable to workers' compensation where explicit statement of rational and inferential process is necessary. This approach is useful in the diagnosis of occupational lung disease and may be particularly valuable in workers' compensation considerations, wherein explicit statement of rationale is needed.

Propulsion technology needs for advanced space transportation systems. [orbit maneuvering engine (space shuttle), space shuttle boosters

NASA Technical Reports Server (NTRS)

Gregory, J. W.

1975-01-01

Plans are formulated for chemical propulsion technology programs to meet the needs of advanced space transportation systems from 1980 to the year 2000. The many possible vehicle applications are reviewed and cataloged to isolate the common threads of primary propulsion technology that satisfies near term requirements in the first decade and at the same time establish the technology groundwork for various potential far term applications in the second decade. Thrust classes of primary propulsion engines that are apparent include: (1) 5,000 to 30,000 pounds thrust for upper stages and space maneuvering; and (2) large booster engines of over 250,000 pounds thrust. Major classes of propulsion systems and the important subdivisions of each class are identified. The relative importance of each class is discussed in terms of the number of potential applications, the likelihood of that application materializing, and the criticality of the technology needed. Specific technology programs are described and scheduled to fulfill the anticipated primary propulsion technology requirements.

Performance analysis of radiation cooled dc transmission lines for high power space systems

NASA Technical Reports Server (NTRS)

Schwarze, G. E.

1985-01-01

As space power levels increase to meet mission objectives and also as the transmission distance between power source and load increases, the mass, volume, power loss, and operating voltage and temperature become important system design considerations. This analysis develops the dependence of the specific mass and percent power loss on hte power and voltage levels, transmission distance, operating temperature and conductor material properties. Only radiation cooling is considered since the transmission line is assumed to operate in a space environment. The results show that the limiting conditions for achieving low specific mass, percent power loss, and volume for a space-type dc transmission line are the permissible transmission voltage and operating temperature. Other means to achieve low specific mass include the judicious choice of conductor materials. The results of this analysis should be immediately applicable to power system trade-off studies including comparisons with ac transmission systems.

Draft Plan for Characterizing Commercial Data Products in Support of Earth Science Research

NASA Technical Reports Server (NTRS)

Ryan, Robert E.; Terrie, Greg; Berglund, Judith

2006-01-01

This presentation introduces a draft plan for characterizing commercial data products for Earth science research. The general approach to the commercial product verification and validation includes focused selection of a readily available commercial remote sensing products that support Earth science research. Ongoing product verification and characterization will question whether the product meets specifications and will examine its fundamental properties, potential and limitations. Validation will encourage product evaluation for specific science research and applications. Specific commercial products included in the characterization plan include high-spatial-resolution multispectral (HSMS) imagery and LIDAR data products. Future efforts in this process will include briefing NASA headquarters and modifying plans based on feedback, increased engagement with the science community and refinement of details, coordination with commercial vendors and The Joint Agency Commercial Imagery Evaluation (JACIE) for HSMS satellite acquisitions, acquiring waveform LIDAR data and performing verification and validation.

76 FR 7575 - National Institute on Drug Abuse; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-10

... evaluate grant applications. Place: National Institutes of Health, Neuroscience Center, 6001 Executive... Institutes of Health, Neuroscience Center, 6001 Executive Boulevard, Rockville, MD 20852 (Virtual Meeting... Health, Neuroscience Center, 6001 Executive Boulevard, Rockville, MD 20852 (Virtual Meeting). Contact...

A highly reliable, autonomous data communication subsystem for an advanced information processing system

NASA Technical Reports Server (NTRS)

Nagle, Gail; Masotto, Thomas; Alger, Linda

1990-01-01

The need to meet the stringent performance and reliability requirements of advanced avionics systems has frequently led to implementations which are tailored to a specific application and are therefore difficult to modify or extend. Furthermore, many integrated flight critical systems are input/output intensive. By using a design methodology which customizes the input/output mechanism for each new application, the cost of implementing new systems becomes prohibitively expensive. One solution to this dilemma is to design computer systems and input/output subsystems which are general purpose, but which can be easily configured to support the needs of a specific application. The Advanced Information Processing System (AIPS), currently under development has these characteristics. The design and implementation of the prototype I/O communication system for AIPS is described. AIPS addresses reliability issues related to data communications by the use of reconfigurable I/O networks. When a fault or damage event occurs, communication is restored to functioning parts of the network and the failed or damage components are isolated. Performance issues are addressed by using a parallelized computer architecture which decouples Input/Output (I/O) redundancy management and I/O processing from the computational stream of an application. The autonomous nature of the system derives from the highly automated and independent manner in which I/O transactions are conducted for the application as well as from the fact that the hardware redundancy management is entirely transparent to the application.

78 FR 47802 - Advisory Committee on Reactor Safeguards (ACRS); Meeting of the ACRS Subcommittee on US-APWR...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-06

... NUCLEAR REGULATORY COMMISSION Advisory Committee on Reactor Safeguards (ACRS); Meeting of the ACRS Subcommittee on US-APWR; Notice of Meeting The ACRS Subcommittee on US-APWR will hold a meeting on September 17...) associated with the US-APWR design certification and the Comanche Peak Combined License Application (COLA...

49 CFR 393.51 - Warning signals, air pressure and vacuum gauges.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the vehicle's service brake system. The warning signal must meet the applicable requirements of... September 1, 1975, must meet the brake system indicator lamp requirements of FMVSS No. 571.105 (S5.3..., must have a warning signal which operates before or upon application of the brakes in the event of a...

Applications of Genome-based Science in Shaping Citrus Industries of the World (JGI Seventh Annual User Meeting, 2012: Genomics of Energy and Environment)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gmitter, Jr., Fred; Rokhsar, Dan

Fred Gmitter from the University of Florida on "Applications of Genome-based Science in Shaping the Future of the World's Citrus Industries" at the 7th Annual Genomics of Energy & Environment Meeting on March 21, 2012 in Walnut Creek, California.

Applications of Genome-based Science in Shaping Citrus Industries of the World (JGI Seventh Annual User Meeting, 2012: Genomics of Energy and Environment)

ScienceCinema

Gmitter, Jr., Fred; Rokhsar, Dan

2018-02-16

Fred Gmitter from the University of Florida on "Applications of Genome-based Science in Shaping the Future of the World's Citrus Industries" at the 7th Annual Genomics of Energy & Environment Meeting on March 21, 2012 in Walnut Creek, California.

32 CFR 571.2 - Basic qualifications for enlistment.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (a) Age requirements for non-prior service and prior service personnel are defined in AR 601-210. (b) Applicants must meet citizenship requirements as defined in AR 601-210. (c) Non-prior and prior service applicants must meet medical fitness standards prescribed in AR 40-501. Height and weight standards for non...

75 FR 52932 - Notice of Commission Meeting and Public Hearing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

.... business meeting include the dockets listed below: 1. Upper Southampton Municipal Authority, D-1965-023 CP... Township, D-1973-191 CP-4. An application for renewal of the Abington Township Wastewater Treatment Plant..., Pennsylvania. 3. Lower Moreland Township Authority, D-1987-052 CP-3. An application for the renewal of an...

78 FR 75552 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-12

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Oak Ridge Reservation. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 47047 - Environmental Management Site-Specific Advisory Board, Northern New Mexico

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-07

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Northern New Mexico. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 49739 - Environmental Management Site-Specific Advisory Board, Northern New Mexico

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Northern New Mexico. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 60688 - Environmental Management Site-Specific Advisory Board, Savannah River Site

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-04

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Savannah River Site. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

78 FR 26005 - Environmental Management Site-Specific Advisory Board, Savannah River Site

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-03

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Savannah River Site. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 53193 - Environmental Management Site-Specific Advisory Board, Savannah River Site

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-31

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Savannah River Site. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

77 FR 2714 - Environmental Management Site-Specific Advisory Board, Oak Ridge Reservation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-19

...This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Oak Ridge Reservation. The Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.