"Death Is Due to Lack of Knowledge": Community Practices of a Successful Multi-Partnered Health Disparities Intervention for Low-Income African Americans in South Carolina

ERIC Educational Resources Information Center

Littleton, Dawn

2013-01-01

The purpose of this study was to describe the methods--including practices, policies, and roles--used by public and academic library staff in a Centers for Disease Control and Prevention (CDC) Racial and Ethnic Approach to Community Health (REACH) intervention that proved successful in reducing or eliminating several diabetes-related health…

Uncertainty Due to Unsteady Fluid/Structure Interaction for the Ares I Vehicle Traversing the Transonic Regime

NASA Technical Reports Server (NTRS)

Bartels, Robert E.

2012-01-01

Rapid reduced-order numerical models are being investigated as candidates to simulate the dynamics of a flexible launch vehicle during atmospheric ascent. There has also been the extension of these new approaches to include gust response. These methods are used to perform aeroelastic and gust response analyses at isolated Mach numbers. Such models require a method to time march through a succession of ascent Mach numbers. An approach is presented for interpolating reduced-order models of the unsteady aerodynamics at successive Mach numbers. The transonic Mach number range is considered here since launch vehicles can suffer the highest dynamic loads through this range. Realistic simulations of the flexible vehicle behavior as it traverses this Mach number range are presented. The response of the vehicle due to gusts is computed. Uncertainties in root mean square and maximum bending moment and crew module accelerations are presented due to assumed probability distributions in design parameters, ascent flight conditions, gusts. The primary focus is on the uncertainty introduced by modeling fidelity. It is found that an unsteady reduced order model produces larger excursions in the root mean square loading and accelerations than does a quasi-steady reduced order model.

A level set method for cupping artifact correction in cone-beam CT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Shipeng; Li, Haibo; Ge, Qi

2015-08-15

Purpose: To reduce cupping artifacts and improve the contrast-to-noise ratio in cone-beam computed tomography (CBCT). Methods: A level set method is proposed to reduce cupping artifacts in the reconstructed image of CBCT. The authors derive a local intensity clustering property of the CBCT image and define a local clustering criterion function of the image intensities in a neighborhood of each point. This criterion function defines an energy in terms of the level set functions, which represent a segmentation result and the cupping artifacts. The cupping artifacts are estimated as a result of minimizing this energy. Results: The cupping artifacts inmore » CBCT are reduced by an average of 90%. The results indicate that the level set-based algorithm is practical and effective for reducing the cupping artifacts and preserving the quality of the reconstructed image. Conclusions: The proposed method focuses on the reconstructed image without requiring any additional physical equipment, is easily implemented, and provides cupping correction through a single-scan acquisition. The experimental results demonstrate that the proposed method successfully reduces the cupping artifacts.« less

Matching by linear programming and successive convexification.

PubMed

Jiang, Hao; Drew, Mark S; Li, Ze-Nian

2007-06-01

We present a novel convex programming scheme to solve matching problems, focusing on the challenging problem of matching in a large search range and with cluttered background. Matching is formulated as metric labeling with L1 regularization terms, for which we propose a novel linear programming relaxation method and an efficient successive convexification implementation. The unique feature of the proposed relaxation scheme is that a much smaller set of basis labels is used to represent the original label space. This greatly reduces the size of the searching space. A successive convexification scheme solves the labeling problem in a coarse to fine manner. Importantly, the original cost function is reconvexified at each stage, in the new focus region only, and the focus region is updated so as to refine the searching result. This makes the method well-suited for large label set matching. Experiments demonstrate successful applications of the proposed matching scheme in object detection, motion estimation, and tracking.

Drude conductivity exhibited by chemically synthesized reduced graphene oxide

NASA Astrophysics Data System (ADS)

Younas, Daniyal; Javed, Qurat-ul-Ain; Fatima, Sabeen; Kalsoom, Riffat; Abbas, Hussain; Khan, Yaqoob

2017-09-01

Electrical conductance in graphene layers having Drude like response due to massless Dirac fermions have been well explained theoretically as well as experimentally. In this paper Drude like electrical conductivity response of reduced graphene oxide synthesized by chemical route is presented. A method slightly different from conventional methods is used to synthesize graphene oxide which is then converted to reduced graphene oxide. Various analytic techniques were employed to verify the successful oxidation and reductions in the process and were also used to measure various parameters like thickness of layers and conductivity. Obtained reduced graphene oxide has very thin layers of thickness around 13 nm on average and reduced graphene oxide has average thickness below 20 nm. Conductivity of the reduced graphene was observed to have Drude like response which is explained on basis of Drude model for conductors.

High-tech or field techs: Radio-telemetry is a cost-effective method for reducing bias in songbird nest searching

USGS Publications Warehouse

Peterson, Sean M.; Streby, Henry M.; Lehman, Justin A.; Kramer, Gunnar R.; Fish, Alexander C.; Andersen, David E.

2015-01-01

We compared the efficacy of standard nest-searching methods with finding nests via radio-tagged birds to assess how search technique influenced our determination of nest-site characteristics and nest success for Golden-winged Warblers (Vermivora chrysoptera). We also evaluated the cost-effectiveness of using radio-tagged birds to find nests. Using standard nest-searching techniques for 3 populations, we found 111 nests in locations with habitat characteristics similar to those described in previous studies: edges between forest and relatively open areas of early successional vegetation or shrubby wetlands, with 43% within 5 m of forest edge. The 83 nests found using telemetry were about half as likely (23%) to be within 5 m of forest edge. We spent little time searching >25 m into forest because published reports state that Golden-winged Warblers do not nest there. However, 14 nests found using telemetry (18%) were >25 m into forest. We modeled nest success using nest-searching method, nest age, and distance to forest edge as explanatory variables. Nest-searching method explained nest success better than nest age alone; we estimated that nests found using telemetry were 10% more likely to fledge young than nests found using standard nest-searching methods. Although radio-telemetry was more expensive than standard nest searching, the cost-effectiveness of both methods differed depending on searcher experience, amount of equipment owned, and bird population density. Our results demonstrate that telemetry can be an effective method for reducing bias in Golden-winged Warbler nest samples, can be cost competitive with standard nest-searching methods in some situations, and is likely to be a useful approach for finding nests of other forest-nesting songbirds.

Spectrophotometric total reducing sugars assay based on cupric reduction.

PubMed

Başkan, Kevser Sözgen; Tütem, Esma; Akyüz, Esin; Özen, Seda; Apak, Reşat

2016-01-15

As the concentration of reducing sugars (RS) is controlled by European legislation for certain specific food and beverages, a simple and sensitive spectrophotometric method for the determination of RS in various food products is proposed. The method is based on the reduction of Cu(II) to Cu(I) with reducing sugars in alkaline medium in the presence of 2,9-dimethyl-1,10-phenanthroline (neocuproine: Nc), followed by the formation of a colored Cu(I)-Nc charge-transfer complex. All simple sugars tested had the linear regression equations with almost equal slope values. The proposed method was successfully applied to fresh apple juice, commercial fruit juices, milk, honey and onion juice. Interference effect of phenolic compounds in plant samples was eliminated by a solid phase extraction (SPE) clean-up process. The method was proven to have higher sensitivity and precision than the widely used dinitrosalicylic acid (DNS) colorimetric method. Copyright © 2015 Elsevier B.V. All rights reserved.

The Relationship of Mathematics Anxiety and Mathematical Knowledge to the Learning of Mathematical Pedagogy by Preservice Elementary Teachers.

ERIC Educational Resources Information Center

Battista, Michael T.

1986-01-01

Examined how preservice elementary teachers' (N=38) mathematical knowledge and mathematics anxiety affect their success in a mathematics methods course. Also examined the hypothesis that a mathematics methods course can reduce the mathematics anxiety of these teachers. One finding is that mathematics anxiety does not inhibit their learning of…

rGO-ZnO nanocomposites for high electrocatalytic effect on water oxidation obtained by microwave-hydrothermal method

NASA Astrophysics Data System (ADS)

Romeiro, Fernanda C.; Rodrigues, Mônica A.; Silva, Luiz A. J.; Catto, Ariadne C.; da Silva, Luis F.; Longo, Elson; Nossol, Edson; Lima, Renata C.

2017-11-01

Reduced graphene oxide-zinc oxide (rGO-ZnO) nanocomposites were successfully synthesized using a facile microwave-hydrothermal method under mild conditions, and their electrocatalytic properties towards O2 evolution were investigated. The microwave radiation played an important role in obtainment of well dispersed ZnO nanoparticles directly on reduced graphene oxide sheets without any additional reducing reagents or passivation agent. X-ray diffraction (XRD), Raman and infrared spectroscopies indicated the reduction of GO as well as the successful synthesis of rGO-ZnO nanocomposites. The chemical states of the samples were shown by XPS analyses. Due to the synergic effect, the resulting nanocomposites exhibited high electronic interaction between ZnO and rGO sheets, which improved the electrocatalytic oxidation of water with low onset potential of 0.48 V (vs. Ag/AgCl) in neutral pH and long-term stability, with high current density during electrolysis. The overpotential for water oxidation decreased in alkaline pH, suggesting useful insight on the catalytic mechanism for O2 evolution.

A Reduced-Order Successive Linear Estimator for Geostatistical Inversion and its Application in Hydraulic Tomography

NASA Astrophysics Data System (ADS)

Zha, Yuanyuan; Yeh, Tian-Chyi J.; Illman, Walter A.; Zeng, Wenzhi; Zhang, Yonggen; Sun, Fangqiang; Shi, Liangsheng

2018-03-01

Hydraulic tomography (HT) is a recently developed technology for characterizing high-resolution, site-specific heterogeneity using hydraulic data (nd) from a series of cross-hole pumping tests. To properly account for the subsurface heterogeneity and to flexibly incorporate additional information, geostatistical inverse models, which permit a large number of spatially correlated unknowns (ny), are frequently used to interpret the collected data. However, the memory storage requirements for the covariance of the unknowns (ny × ny) in these models are prodigious for large-scale 3-D problems. Moreover, the sensitivity evaluation is often computationally intensive using traditional difference method (ny forward runs). Although employment of the adjoint method can reduce the cost to nd forward runs, the adjoint model requires intrusive coding effort. In order to resolve these issues, this paper presents a Reduced-Order Successive Linear Estimator (ROSLE) for analyzing HT data. This new estimator approximates the covariance of the unknowns using Karhunen-Loeve Expansion (KLE) truncated to nkl order, and it calculates the directional sensitivities (in the directions of nkl eigenvectors) to form the covariance and cross-covariance used in the Successive Linear Estimator (SLE). In addition, the covariance of unknowns is updated every iteration by updating the eigenvalues and eigenfunctions. The computational advantages of the proposed algorithm are demonstrated through numerical experiments and a 3-D transient HT analysis of data from a highly heterogeneous field site.

Behavioural techniques in the management of aerophagia in patients with hiatus hernia.

PubMed

Calloway, S P; Fonagy, P; Pounder, R E; Morgan, M J

1983-01-01

Aerophagia has been shown to occur in association with hiatus hernia, and it has been suggested that it may have an aetiological role. Two behavioural methods are described, which are designed to reduce the rate of swallowing. They were applied to a group of 12 patients with hiatus hernia, in whom aerophagia had been demonstrated. Patients were on the whole successful in reducing their rate of spontaneous swallowing. An association was observed between symptomatic improvement and successful reduction of swallowing rate. This was still apparent on follow-up at nine months. Symptomatic improvement, however, on the whole appeared to be short-lived. The possible clinical significance of aerophagia in hiatus hernia is discussed.

White-tailed deer harvest from the chronic wasting disease eradication zone in south-central Wisconsin

USGS Publications Warehouse

Blanchong, Julie A.; Joly, D.O.; Samuel, M.D.; Langenberg, J.A.; Rolley, R.E.; Sausen, J.F.

2006-01-01

Chronic wasting disease (CWD) was discovered in free-ranging white-tailed deer (Odocoileus virginianus) in south-central Wisconsin in 2002. The current control method for CWD in the state is the harvest of deer from affected areas to reduce population density and lower CWD transmission. We used spatial regression methods to identify factors associated with deer harvest across south-central Wisconsin. Harvest of deer by hunters was positively related to deer density (slope=0.003, 95% CI=0.0001-0.006), the number of landowners that requested harvest permits (slope=0.071, 95% CI=0.037-0.105), and proximity to the area of highest CWD infection (slope=-0.041, 95% CI=-0.056- -0.027). Concomitantly, harvest was not impacted in areas where landowners signed a petition protesting intensive deer reduction (slope=-0.00006, 95% CI=-0.0005-0.0003). Our results suggest that the success of programs designed to reduce deer populations for disease control or to reduce overabundance in Wisconsin are dependent on landowner and hunter participation. We recommend that programs or actions implemented to eradicate or mitigate the spread of CWD should monitor and assess deer population reduction and evaluate factors affecting program success to improve methods to meet management goals.

Creating an Environmental Justice Framework for Policy Change in Childhood Asthma: A Grassroots to Treetops Approach

PubMed Central

Sargent, Katherine; Arons, Abigail; Standish, Marion; Brindis, Claire D.

2011-01-01

Objectives. The Community Action to Fight Asthma Initiative, a network of coalitions and technical assistance providers in California, employed an environmental justice approach to reduce risk factors for asthma in school-aged children. Policy advocacy focused on housing, schools, and outdoor air quality. Technical assistance partners from environmental science, policy advocacy, asthma prevention, and media assisted in advocacy. An evaluation team assessed progress and outcomes. Methods. A theory of change and corresponding logic model were used to document coalition development and successes. Site visits, surveys, policymaker interviews, and participation in meetings documented the processes and outcomes. Quantitative and qualitative data were analyzed to assess strategies, successes, and challenges. Results. Coalitions, working with community residents and technical assistance experts, successfully advocated for policies to reduce children's exposures to environmental triggers, particularly in low-income communities and communities of color. Policies were implemented at various levels. Conclusions. Environmental justice approaches to policy advocacy could be an effective strategy to address inequities across communities. Strong technical assistance, close community involvement, and multilevel strategies were all essential to effective policies to reduce environmental inequities. PMID:21836108

Evaluation of alternative approaches for landscape-scale biomass estimation in a mixed-species northern forest

Treesearch

Coeli M. Hoover; Mark J. Ducey; R. Andy Colter; Mariko Yamasaki

2018-01-01

There is growing interest in estimating and mapping biomass and carbon content of forests across large landscapes. LiDAR-based inventory methods are increasingly common and have been successfully implemented in multiple forest types. Asner et al. (2011) developed a simple universal forest carbon estimation method for tropical forests that reduces the amount of required...

Mobilizing Rural Community Resources for Support and Development of Local Learning Systems in Developing Countries.

ERIC Educational Resources Information Center

O'Grady, Barbara, Ed.; Levenson, Ruth, Ed.

Focusing on how local village communities in developing countries might support part or all of their educational costs, this study describes methods used by developing countries to reduce education costs and offers a model incorporating several of the most successful components of such projects. First is a discussion of methods used by governments…

Contraception After Kidney Transplantation, From Myth to Reality: A Comprehensive Review of the Current Evidence.

PubMed

Yousif, Mohamed Elamin Awad; Bridson, Julie M; Halawa, Ahmed

2016-06-01

There is a misconception among transplant clinicians that contraception after a successful renal transplant is challenging. This is partly due to the complex nature of transplant patients, where immunosuppression and graft dysfunction create major concerns. In addition, good evidence regarding contraception and transplant is scarce, with most of the evidence extrapolated from observational and case-controlled studies, thus adding to the dilemma of treating these patients. In this review, we closely analyzed the different methods of contraception and critically evaluated the efficacy of the different options for contraception after kidney transplant. We conclude that contraception after renal transplant is successful with acceptable risk. A multidisciplinary team approach involving obstetricians and transplant clinicians to decide the appropriate timing for conception is recommended. Early counseling on contraception is important to reduce the risk of unplanned pregnancies, improve pregnancy outcomes, and reduce maternal complications in patients after kidney transplant. To ascertain appropriate advice on the method of contraception, individualizing the method of contraception according to a patient's individual risks and expectations is essential.

Liquid-phase and solid-phase microwave irradiations for reduction of graphite oxide

NASA Astrophysics Data System (ADS)

Zhao, Na; Wen, Chen-Yu; Zhang, David Wei; Wu, Dong-Ping; Zhang, Zhi-Bin; Zhang, Shi-Li

2014-12-01

In this paper, two microwave irradiation methods: (i) liquid-phase microwave irradiation (MWI) reduction of graphite oxide suspension dissolved in de-ionized water and N, N-dimethylformamide, respectively, and (ii) solid-phase MWI reduction of graphite oxide powder have been successfully carried out to reduce graphite oxide. The reduced graphene oxide products are thoroughly characterized by scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectral analysis, Raman spectroscopy, UV-Vis absorption spectral analysis, and four-point probe conductivity measurements. The results show that both methods can efficiently remove the oxygen-containing functional groups attached to the graphite layers, though the solid-phase MWI reduction method can obtain far more efficiently a higher quality-reduced graphene oxide with fewer defects. The I(D)/I(G) ratio of the solid-phase MWI sample is as low as 0.46, which is only half of that of the liquid-phase MWI samples. The electrical conductivity of the reduced graphene oxide by the solid method reaches 747.9 S/m, which is about 25 times higher than that made by the liquid-phase method.

Improving image quality for digital breast tomosynthesis: an automated detection and diffusion-based method for metal artifact reduction

NASA Astrophysics Data System (ADS)

Lu, Yao; Chan, Heang-Ping; Wei, Jun; Hadjiiski, Lubomir M.; Samala, Ravi K.

2017-10-01

In digital breast tomosynthesis (DBT), the high-attenuation metallic clips marking a previous biopsy site in the breast cause errors in the estimation of attenuation along the ray paths intersecting the markers during reconstruction, which result in interplane and inplane artifacts obscuring the visibility of subtle lesions. We proposed a new metal artifact reduction (MAR) method to improve image quality. Our method uses automatic detection and segmentation to generate a marker location map for each projection (PV). A voting technique based on the geometric correlation among different PVs is designed to reduce false positives (FPs) and to label the pixels on the PVs and the voxels in the imaged volume that represent the location and shape of the markers. An iterative diffusion method replaces the labeled pixels on the PVs with estimated tissue intensity from the neighboring regions while preserving the original pixel values in the neighboring regions. The inpainted PVs are then used for DBT reconstruction. The markers are repainted on the reconstructed DBT slices for radiologists’ information. The MAR method is independent of reconstruction techniques or acquisition geometry. For the training set, the method achieved 100% success rate with one FP in 19 views. For the test set, the success rate by view was 97.2% for core biopsy microclips and 66.7% for clusters of large post-lumpectomy markers with a total of 10 FPs in 58 views. All FPs were large dense benign calcifications that also generated artifacts if they were not corrected by MAR. For the views with successful detection, the metal artifacts were reduced to a level that was not visually apparent in the reconstructed slices. The visibility of breast lesions obscured by the reconstruction artifacts from the metallic markers was restored.

High-performance for hydrogen evolution and pollutant degradation of reduced graphene oxide/two-phase g-C3N4 heterojunction photocatalysts.

PubMed

Song, Chengjie; Fan, Mingshan; Shi, Weidong; Wang, Wei

2018-05-01

We have successfully synthesized the composites of two-phase g-C 3 N 4 heterojunction photocatalysts by one-step method. And the reduced graphene oxide/two-phase g-C 3 N 4 heterojunction photocatalyst was fabricated via a facile hydrothermal reduction method. The characterization results indicated that the two-phase g-C 3 N 4 was integrated closely, and the common phenomenon of agglomeration for g-C 3 N 4 was significantly reduced. Moreover, the oxidized graphene was reduced successfully in the composites and the graphene was overlaid on the surface or the interlayers of g-C 3 N 4 heterojunction composite uniformly. In addition, we have carried out the photocatalytic activity experiments by H 2 evolution and rhodamine B removal, tetracycline removal under the visible light irradiation. The results revealed that the composite has improved the separation efficiency a lot than the pure photocatalyst. The photocurrent test demonstrated that the recombination of electrons and holes were efficiently inhibited as well as enhanced the photocatalytic activity. The 0.4% rGO loaded samples, 0.4% rGOCN2, own the best performance. Its rate of H 2 evolution was 15 times as high as that of the pure g-C 3 N 4 .

Methods of Antimicrobial Coating of Diverse Materials

NASA Technical Reports Server (NTRS)

Akse, James R.; Holtsnider, John T.; Kliestik, Helen

2011-01-01

Methods of coating diverse substrate materials with antimicrobial agents have been developed. Originally intended to reduce health risks to astronauts posed by pathogenic microorganisms that can grow on surfaces in spacecraft, these methods could also be used on Earth for example, to ensure sterility of surgical inserts and other medical equipment. The methods involve, generally, chemical preparation of substrate surfaces to enable attachment of antimicrobial molecules to the substrate surfaces via covalent bonds. Substrate materials that have been treated successfully include aluminum, glass, a corrosion-resistant nickel alloy, stainless steel, titanium, and poly(tetrafluoroethylene). Antimicrobial agents that have been successfully immobilized include antibiotics, enzymes, bacteriocins, bactericides, and fungicides. A variety of linkage chem istries were employed. Activity of antimicrobial coatings against gram-positive bacteria, gram-negative bacteria, and fungi was demonstrated. Results of investigations indicate that the most suitable combination of antimicrobial agent, substrate, and coating method depends upon the intended application.

Rapid and reliable high-throughput methods of DNA extraction for use in barcoding and molecular systematics of mushrooms.

PubMed

Dentinger, Bryn T M; Margaritescu, Simona; Moncalvo, Jean-Marc

2010-07-01

We present two methods for DNA extraction from fresh and dried mushrooms that are adaptable to high-throughput sequencing initiatives, such as DNA barcoding. Our results show that these protocols yield ∼85% sequencing success from recently collected materials. Tests with both recent (<2 year) and older (>100 years) specimens reveal that older collections have low success rates and may be an inefficient resource for populating a barcode database. However, our method of extracting DNA from herbarium samples using small amount of tissue is reliable and could be used for important historical specimens. The application of these protocols greatly reduces time, and therefore cost, of generating DNA sequences from mushrooms and other fungi vs. traditional extraction methods. The efficiency of these methods illustrates that standardization and streamlining of sample processing should be shifted from the laboratory to the field. © 2009 Blackwell Publishing Ltd.

Computer simulation and implementation of defected ground structure on a microstrip antenna

NASA Astrophysics Data System (ADS)

Adrian, H.; Rambe, A. H.; Suherman

2018-03-01

Defected Ground Structure (DGS) is a method reducing etching area on antenna ground to form desirable antenna’s ground field. This paper reports the method impact on microstrip antennas working on 1800 and 2400 MHz. These frequencies are important as many radio network applications such mobile phones and wireless devices working on these channels. The assessments were performed by simulating and fabricating the evaluated antennas. Both simulation data and implementation measurements show that DGS successfully improves antenna performances by increasing bandwidth up to 19%, reducing return loss up to 109% and increasing gain up to 33%.

On the efficacy of stochastic collocation, stochastic Galerkin, and stochastic reduced order models for solving stochastic problems

DOE PAGES

Richard V. Field, Jr.; Emery, John M.; Grigoriu, Mircea Dan

2015-05-19

The stochastic collocation (SC) and stochastic Galerkin (SG) methods are two well-established and successful approaches for solving general stochastic problems. A recently developed method based on stochastic reduced order models (SROMs) can also be used. Herein we provide a comparison of the three methods for some numerical examples; our evaluation only holds for the examples considered in the paper. The purpose of the comparisons is not to criticize the SC or SG methods, which have proven very useful for a broad range of applications, nor is it to provide overall ratings of these methods as compared to the SROM method.more » Furthermore, our objectives are to present the SROM method as an alternative approach to solving stochastic problems and provide information on the computational effort required by the implementation of each method, while simultaneously assessing their performance for a collection of specific problems.« less

Modified electrokinetic sample injection method in chromatography and electrophoresis analysis

DOEpatents

Davidson, J. Courtney; Balch, Joseph W.

2001-01-01

A sample injection method for horizontal configured multiple chromatography or electrophoresis units, each containing a number of separation/analysis channels, that enables efficient introduction of analyte samples. This method for loading when taken in conjunction with horizontal microchannels allows much reduced sample volumes and a means of sample stacking to greatly reduce the concentration of the sample. This reduction in the amount of sample can lead to great cost savings in sample preparation, particularly in massively parallel applications such as DNA sequencing. The essence of this method is in preparation of the input of the separation channel, the physical sample introduction, and subsequent removal of excess material. By this method, sample volumes of 100 nanoliter to 2 microliters have been used successfully, compared to the typical 5 microliters of sample required by the prior separation/analysis method.

Linking AS, SE, V, and MN Behavior to Natural Biostimulated Uranium Cycling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keimowitz, Alison; Ranville, James; Mailloux, Brian

The project “Linking As, Se, V, and Mn behavior to Natural and Biostimulated Uranium Cycling” successfully investigated Arsenic cycling the Rifle Colorado IFRC. This project trained undergraduate and graduate students at the Colorado School of Mines, Vassar College, and Barnard College. This resulted in both undergraduate theses and a PhD thesis and multiple publications. The science was highly successful and we were able to test the main hypotheses. We have shown that (H1) under reducing conditions that promote uranium immobilization arsenic is readily mobilized, that (H2) thioarsenic species are abundant during this mobilization, and (H3) we have examined arsenic mobilizationmore » for site sediment. At the Rifle IFRC Acetate was added during experiments to immobilize Uranium. These experiments successfully immobilized uranium but unfortunately would mobilize arsenic. We developed robust sampling and analysis methods for thioarsenic species. We showed that the mobilization occurred under sulfate reducing conditions and the majority of the arsenic was in the form of thioarsenic species. Previous studies had predicted the presence of thioarsenic species but this study used robust field and laboratory methods to quantitatively determine the presence of thioarsenic species. During stimulation in wells with high arsenic the primary species were trithioarsenate and dithioarsenate. In wells with low levels of arsenic release thioarsenates were absent or minor components. Fortunately after the injection of acetate ended the aquifer would become less reducing and the arsenic concentrations would decrease to pre-injection levels. In aquifers where organic carbon is being added as a remedial method or as a contaminant the transient mobility of arsenic during sulfidogenesis should be considered especially in sulfate rich aquifers as this could impact downgradient water quality.« less

Morphological alterations in the prefrontal cortex and the amygdala in unsuccessful psychopaths.

PubMed

Yang, Yaling; Raine, Adrian; Colletti, Patrick; Toga, Arthur W; Narr, Katherine L

2010-08-01

Although deficits in several cortical and subcortical structures have been found in psychopaths, it remains unclear whether the neuropathology differs between subgroups of psychopaths (i.e., unsuccessful and successful). Using both traditional and novel image analyses methods, this study aims to reveal gross and subtle morphological changes in the prefrontal cortex and the amygdala in unsuccessful and successful psychopaths. Volumetric segmentation, cortical pattern matching, and surface-based mesh modeling methods were used to examine prefrontal and amygdala structures in 16 unsuccessful psychopaths, 10 successful psychopaths, and 27 controls. Significant reduced gray matter volume and cortical thickness/surface shape in the middle frontal, orbitofrontal cortex and the amygdala were found in unsuccessful psychopaths but not successful psychopaths, compared with controls. This study provides the first evidence of greater prefrontal and amygdala structural deficits in unsuccessful psychopaths, which may predispose them to poor behavioral control and impaired decision-making, thus making them more prone to convictions. Copyright 2010 APA, all rights reserved

Synopsis of Past Stimulation Methods in Enhanced (Engineered) Geothermal Systems, Boreholes, and Existing Hydrothermal Systems with Success Analysis and Recommendations for Future Projects

NASA Astrophysics Data System (ADS)

Broadhurst, T.; Mattson, E.

2017-12-01

Enhanced geothermal systems (EGS) are gaining in popularity as a technology that can be used to increase areas for geothermal resource procurement. One of the most important factors in the success of an EGS system is the success of the subsurface reservoir that is used for fluid flow and heat mining through advection. There are numerous challenges in stimulating a successful reservoir, including maintaining flow rates, minimizing leak off, preventing short-circuiting, and reducing the risk of microseismicity associated with subsurface activity. Understanding past examples of stimulation can be invaluable in addressing these challenges. This study provides an overview of stimulation methods that have been employed in EGS systems from 1974-2017. We include all geothermal reservoirs and demonstration projects that have experienced hydrofracturing, chemical stimulation, and induced thermal stress for a comprehensive list. We also examine different metrics and measures of success in geothermal reservoir stimulation to draw conclusions and provide recommendations for future projects. Multiple project characteristics are reported including geologic setting, stress conditions, reservoir temperature, injection specifics, resulting microseismicity, and overall project goals. Insight into optimal and unproductive stimulation methods is crucial to conserving mental capital, utilizing project funding, and ensuring EGS technology advances as efficiently as possible.

Change IS Possible: Reducing High-Risk Drinking Using a Collaborative Improvement Model.

PubMed

Lanter, Patricia L; Wolff, Kristina B; Johnson, Lisa C; Ercolano, Ellyn M; Kilmer, Jason R; Provost, Lloyd

2015-01-01

To describe the adoption of public health and improvement methodologies to address college students' high-risk drinking behaviors and to aid in prevention efforts. Members of 32 colleges and universities, content experts, and staff members of the National College Health Improvement Program (NCHIP). A 2-year learning collaborative developed by NCHIP trained individuals from 32 different college and universities in using the Plan-Do-Study-Act cycle as a method to create and implement initiatives aimed at reducing students' high-risk drinking behaviors and related harms. Participants experienced success ranging from noteworthy increases in type and amount of interventions directed at reducing high-risk drinking, to creating collaboratives across campus, the local community, and stakeholders. Challenges related to data collection and creating lasting cultural change remain. The use of quality improvement methodologies and creation of a national collaborative successfully effected meaningful change in high-risk drinking behaviors on college campuses.

PubMed Central

Bilodeau, Rolland

1966-01-01

Local anesthesia can be very useful in the first stage of labour when a general anesthetic cannot be given during this stage, and it is associated with reduced respiratory depression in the fetus. Paracervical block anesthesia is one such method of local anesthesia. Its successful use depends upon a proper technique, knowledge of the indications and contraindications, appropriate equipment and use of a long-acting anesthetic agent of low toxicity. A series of 90 cases of paracervical block are described in which the success rate was 90 to 95%. ImagesFig. 2 PMID:4952378

Keeping Campuses Safe.

ERIC Educational Resources Information Center

Kennedy, Mike

1999-01-01

Describes how colleges and universities are using technology, as well as traditional methods, to keep campuses safe and reduce crime. Topics include using free pizza in a successful contest to teach students about campus safety, installing security cameras, using access-control cards, providing adequate lighting, and creating a bicycle patrol…

Legalistic and Personalistic Adaptations to Ethnic Conflict in a Texas School

ERIC Educational Resources Information Center

Foley, Douglas E.

1976-01-01

In attempts to reduce conflict between Mexicano and Anglo high School students, administrators tended to use legalistic modes while most teachers relied upon personalistic strategies. The most successful results were obtained by teachers who utilized a combination of both methods. (RW)

Trash Talk.

ERIC Educational Resources Information Center

Stermer, Edward

1998-01-01

Discusses creative methods of handling the tremendous amounts of trash generated daily in the U.S. Recycling, precycling, and reusing items all effectively reduce the amount of trash sent to landfills. The three components of successful recycling programs are collection, manufacturing, and buying recycled products. Pay-as-you-throw programs…

A vector radiative transfer model for coupled atmosphere and ocean systems based on successive order of scattering method.

PubMed

Zhai, Peng-Wang; Hu, Yongxiang; Trepte, Charles R; Lucker, Patricia L

2009-02-16

A vector radiative transfer model has been developed for coupled atmosphere and ocean systems based on the Successive Order of Scattering (SOS) Method. The emphasis of this study is to make the model easy-to-use and computationally efficient. This model provides the full Stokes vector at arbitrary locations which can be conveniently specified by users. The model is capable of tracking and labeling different sources of the photons that are measured, e.g. water leaving radiances and reflected sky lights. This model also has the capability to separate florescence from multi-scattered sunlight. The delta - fit technique has been adopted to reduce computational time associated with the strongly forward-peaked scattering phase matrices. The exponential - linear approximation has been used to reduce the number of discretized vertical layers while maintaining the accuracy. This model is developed to serve the remote sensing community in harvesting physical parameters from multi-platform, multi-sensor measurements that target different components of the atmosphere-oceanic system.

Normalized Cut Algorithm for Automated Assignment of Protein Domains

NASA Technical Reports Server (NTRS)

Samanta, M. P.; Liang, S.; Zha, H.; Biegel, Bryan A. (Technical Monitor)

2002-01-01

We present a novel computational method for automatic assignment of protein domains from structural data. At the core of our algorithm lies a recently proposed clustering technique that has been very successful for image-partitioning applications. This grap.,l-theory based clustering method uses the notion of a normalized cut to partition. an undirected graph into its strongly-connected components. Computer implementation of our method tested on the standard comparison set of proteins from the literature shows a high success rate (84%), better than most existing alternative In addition, several other features of our algorithm, such as reliance on few adjustable parameters, linear run-time with respect to the size of the protein and reduced complexity compared to other graph-theory based algorithms, would make it an attractive tool for structural biologists.

Improving yield and reliability of FIB modifications using electrical testing

NASA Astrophysics Data System (ADS)

Desplats, Romain; Benbrik, Jamel; Benteo, Bruno; Perdu, Philippe

1998-08-01

Focused Ion Beam technology has two main areas of application for ICs: modification and preparation for technological analysis. The most solicited area is modification. This involves physically modifying a circuit by cutting lines and creating new ones in order to change the electrical function of the circuit. IC planar technologies have an increasing number of metal interconnections making FIB modifications more complex and decreasing their changes of success. The yield of FIB operations on ICs reflects a downward trend that imposes a greater number of circuits to be modified in order to successfully correct a small number of them. This requires extended duration, which is not compatible with production line turn around times. To respond to this problem, two solutions can be defined: either, reducing the duration of each FIB operation or increasing the success rate of FIB modifications. Since reducing the time depends mainly on FIB operator experience, insuring a higher success rate represents a more crucial aspect as both experienced and novice operators could benefit from this improvement. In order to insure successful modifications, it is necessary to control each step of a FIB operation. To do this, we have developed a new method using in situ electrical testing which has a direct impact on the yield of FIB modifications. We will present this innovative development through a real case study of a CMOS ASIC for high-speed communications. Monitoring the electrical behavior at each step in a FIB operation makes it possible to reduce the number of circuits to be modified and consequently reduces system costs thanks to better yield control. Knowing the internal electrical behavior also gives us indications about the impact on reliability of FIB modified circuits. Finally, this approach can be applied to failure analysis and FIB operations on flip chip circuits.

Anti-inflammatory, Analgesic and Antiulcer properties of Porphyra vietnamensis

PubMed Central

Bhatia, Saurabh; Sharma, Kiran; Sharma, Ajay; Nagpal, Kalpana; Bera, Tanmoy

2015-01-01

Objectives: Aim of the present work was to investigate the anti-inflammatory, analgesic and antiulcer effects of red seaweed Porphyra vietnamensis (P. vietnamenis). Materials and Methods: Aqueous (POR) and alcoholic (PE) fractions were successfully isolated from P. vietnamenis. Further biological investigations were performed using a classic test of paw edema induced by carrageenan, writhing induced by acetic acid, hot plate method and naproxen induced gastro-duodenal ulcer. Results: Among the fractions POR showed better activity. POR and PE significantly (p < 0.05) reduced carrageenan induced paw edema in a dose dependent manner. In the writhing test POR significantly (p < 0.05) reduced abdominal writhes than PE. In hot plate method POR showed better analgesic activity than PE. POR showed comparable ulcers reducing potential (p<0.01) to that of omeprazole, and has more ulcer reducing potential then PE. Conclusions: The results of this study demonstrated that P. vietnamenis aqueous fraction possesses biological activity that is close to the standards taken for the treatment of peripheral painful or/and inflammatory and ulcer conditions. PMID:25767759

A component modes projection and assembly model reduction methodology for articulated, multi-flexible body structures

NASA Technical Reports Server (NTRS)

Lee, Allan Y.; Tsuha, Walter S.

1993-01-01

A two-stage model reduction methodology, combining the classical Component Mode Synthesis (CMS) method and the newly developed Enhanced Projection and Assembly (EP&A) method, is proposed in this research. The first stage of this methodology, called the COmponent Modes Projection and Assembly model REduction (COMPARE) method, involves the generation of CMS mode sets, such as the MacNeal-Rubin mode sets. These mode sets are then used to reduce the order of each component model in the Rayleigh-Ritz sense. The resultant component models are then combined to generate reduced-order system models at various system configurations. A composite mode set which retains important system modes at all system configurations is then selected from these reduced-order system models. In the second stage, the EP&A model reduction method is employed to reduce further the order of the system model generated in the first stage. The effectiveness of the COMPARE methodology has been successfully demonstrated on a high-order, finite-element model of the cruise-configured Galileo spacecraft.

Quasi-equilibria in reduced Liouville spaces.

PubMed

Halse, Meghan E; Dumez, Jean-Nicolas; Emsley, Lyndon

2012-06-14

The quasi-equilibrium behaviour of isolated nuclear spin systems in full and reduced Liouville spaces is discussed. We focus in particular on the reduced Liouville spaces used in the low-order correlations in Liouville space (LCL) simulation method, a restricted-spin-space approach to efficiently modelling the dynamics of large networks of strongly coupled spins. General numerical methods for the calculation of quasi-equilibrium expectation values of observables in Liouville space are presented. In particular, we treat the cases of a time-independent Hamiltonian, a time-periodic Hamiltonian (with and without stroboscopic sampling) and powder averaging. These quasi-equilibrium calculation methods are applied to the example case of spin diffusion in solid-state nuclear magnetic resonance. We show that there are marked differences between the quasi-equilibrium behaviour of spin systems in the full and reduced spaces. These differences are particularly interesting in the time-periodic-Hamiltonian case, where simulations carried out in the reduced space demonstrate ergodic behaviour even for small spins systems (as few as five homonuclei). The implications of this ergodic property on the success of the LCL method in modelling the dynamics of spin diffusion in magic-angle spinning experiments of powders is discussed.

Assessment of Intralaminar Progressive Damage and Failure Analysis Using an Efficient Evaluation Framework

NASA Technical Reports Server (NTRS)

Hyder, Imran; Schaefer, Joseph; Justusson, Brian; Wanthal, Steve; Leone, Frank; Rose, Cheryl

2017-01-01

Reducing the timeline for development and certification for composite structures has been a long standing objective of the aerospace industry. This timeline can be further exacerbated when attempting to integrate new fiber-reinforced composite materials due to the large number of testing required at every level of design. computational progressive damage and failure analysis (PDFA) attempts to mitigate this effect; however, new PDFA methods have been slow to be adopted in industry since material model evaluation techniques have not been fully defined. This study presents an efficient evaluation framework which uses a piecewise verification and validation (V&V) approach for PDFA methods. Specifically, the framework is applied to evaluate PDFA research codes within the context of intralaminar damage. Methods are incrementally taken through various V&V exercises specifically tailored to study PDFA intralaminar damage modeling capability. Finally, methods are evaluated against a defined set of success criteria to highlight successes and limitations.

An improved reaction path optimization method using a chain of conformations

NASA Astrophysics Data System (ADS)

Asada, Toshio; Sawada, Nozomi; Nishikawa, Takuya; Koseki, Shiro

2018-05-01

The efficient fast path optimization (FPO) method is proposed to optimize the reaction paths on energy surfaces by using chains of conformations. No artificial spring force is used in the FPO method to ensure the equal spacing of adjacent conformations. The FPO method is applied to optimize the reaction path on two model potential surfaces. The use of this method enabled the optimization of the reaction paths with a drastically reduced number of optimization cycles for both potentials. It was also successfully utilized to define the MEP of the isomerization of the glycine molecule in water by FPO method.

Characterisation and reduction of the EEG artefact caused by the helium cooling pump in the MR environment: validation in epilepsy patient data.

PubMed

Rothlübbers, Sven; Relvas, Vânia; Leal, Alberto; Murta, Teresa; Lemieux, Louis; Figueiredo, Patrícia

2015-03-01

The EEG acquired simultaneously with fMRI is distorted by a number of artefacts related to the presence of strong magnetic fields, which must be reduced in order to allow for a useful interpretation and quantification of the EEG data. For the two most prominent artefacts, associated with magnetic field gradient switching and the heart beat, reduction methods have been developed and applied successfully. However, a number of artefacts related to the MR-environment can be found to distort the EEG data acquired even without ongoing fMRI acquisition. In this paper, we investigate the most prominent of those artefacts, caused by the Helium cooling pump, and propose a method for its reduction and respective validation in data collected from epilepsy patients. Since the Helium cooling pump artefact was found to be repetitive, an average template subtraction method was developed for its reduction with appropriate adjustments for minimizing the degradation of the physiological part of the signal. The new methodology was validated in a group of 15 EEG-fMRI datasets collected from six consecutive epilepsy patients, where it successfully reduced the amplitude of the artefact spectral peaks by 95 ± 2 % while the background spectral amplitude within those peaks was reduced by only -5 ± 4 %. Although the Helium cooling pump should ideally be switched off during simultaneous EEG-fMRI acquisitions, we have shown here that in cases where this is not possible the associated artefact can be effectively reduced in post processing.

Dielectric Properties of Reduced Graphene Oxide/Copper Phthalocyanine Nanocomposites Fabricated Through π- π Interaction

NASA Astrophysics Data System (ADS)

Wang, Zicheng; Wei, Renbo; Liu, Xiaobo

2017-01-01

Reduced graphene oxide/copper phthalocyanine nanocomposites are successfully prepared through a simple and effective two-step method, involving preferential reduction of graphene oxide and followed by self-assembly with copper phthalocyanine. The results of photographs, ultraviolet visible, x-ray diffraction, x-ray photoelectron spectroscopy, and scanning electron microscopy show that the in situ blending method can effectively facilitate graphene sheets to disperse homogenously in the copper phthalocyanine matrix through π- π interactions. As a result, the reduction of graphene oxide and restoration of the sp 2 carbon sites in graphene can enhance the dielectric properties and alternating current conductivity of copper phthalocyanine effectively.

Ion Monitoring

DOEpatents

Orr, Christopher Henry; Luff, Craig Janson; Dockray, Thomas; Macarthur, Duncan Whittemore

2003-11-18

The apparatus and method provide a technique for significantly reducing capacitance effects in detector electrodes arising due to movement of the instrument relative to the item/location being monitored in ion detection based techniques. The capacitance variations are rendered less significant by placing an electrically conducting element between the detector electrodes and the monitored location/item. Improved sensitivity and reduced noise signals arise as a result. The technique also provides apparatus and method suitable for monitoring elongate items which are unsuited to complete enclosure in one go within a chamber. The items are monitored part by part as the pass through the instrument, so increasing the range of items or locations which can be successfully monitored.

Identification of memory reactivation during sleep by EEG classification.

PubMed

Belal, Suliman; Cousins, James; El-Deredy, Wael; Parkes, Laura; Schneider, Jules; Tsujimura, Hikaru; Zoumpoulaki, Alexia; Perapoch, Marta; Santamaria, Lorena; Lewis, Penelope

2018-04-17

Memory reactivation during sleep is critical for consolidation, but also extremely difficult to measure as it is subtle, distributed and temporally unpredictable. This article reports a novel method for detecting such reactivation in standard sleep recordings. During learning, participants produced a complex sequence of finger presses, with each finger cued by a distinct audio-visual stimulus. Auditory cues were then re-played during subsequent sleep to trigger neural reactivation through a method known as targeted memory reactivation (TMR). Next, we used electroencephalography data from the learning session to train a machine learning classifier, and then applied this classifier to sleep data to determine how successfully each tone had elicited memory reactivation. Neural reactivation was classified above chance in all participants when TMR was applied in SWS, and in 5 of the 14 participants to whom TMR was applied in N2. Classification success reduced across numerous repetitions of the tone cue, suggesting either a gradually reducing responsiveness to such cues or a plasticity-related change in the neural signature as a result of cueing. We believe this method will be valuable for future investigations of memory consolidation. Copyright © 2018 Elsevier Inc. All rights reserved.

Losartan Administration Reduces Fibrosis but Hinders Functional Recovery after Volumetric Muscle Loss Injury

DTIC Science & Technology

2014-09-25

therapy. Pre - viously, losartan has been successfully used to reduce fibrosis and improve both muscle regeneration and function in several models of...efficacy of losartan has not yet been tested in a VML injury model. VML injury involves a substantial loss of muscle tissue that does not regenerate by...fibrosis development after VML injury in the rat tibialis anterior (TA) muscle. METHODS Experimental Design Male Lewis rats with VML were provided access

Developments in neonatal technology continue to improve infant outcomes.

PubMed

Noble, Lawrence

2003-09-01

The past 20 years have yielded little success in reducing prematurity rates or decreasing the major morbidities of premature infants. Determination of interventions to decrease prematurity rates, and the development of methods to reduce premature neurologic damage, are the challenges for the next 20 years. With the advent of genetic analysis and the ability to study environmental and genetic interactions, we may be on the threshold of another significant decrease in mortality and morbidity in the premature infant.

An improved transmutation method for quantitative determination of the components in multicomponent overlapping chromatograms.

PubMed

Shao, Xueguang; Yu, Zhengliang; Ma, Chaoxiong

2004-06-01

An improved method is proposed for the quantitative determination of multicomponent overlapping chromatograms based on a known transmutation method. To overcome the main limitation of the transmutation method caused by the oscillation generated in the transmutation process, two techniques--wavelet transform smoothing and the cubic spline interpolation for reducing data points--were adopted, and a new criterion was also developed. By using the proposed algorithm, the oscillation can be suppressed effectively, and quantitative determination of the components in both the simulated and experimental overlapping chromatograms is successfully obtained.

Determination of benzylpenicillin in pharmaceuticals by capillary zone electrophoresis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoyt, A.M. Jr.; Sepaniak, M.J.

A rapid and direct method is described for the determination of benzylpenicillin (penicillin G) in pharmaceutical preparations. The method involves very little sample preparation and total analysis time for duplicate results is less 30 minutes per sample. The method takes advantage of the speed and separating power of capillary zone electrophoresis (CZE). Detection of penicillin is by absorption at 228 nm. An internal standard is employed to reduce sample injection error. The method was applied successfully to both tablets and injectable preparations. 14 refs., 5 figs., 3 tabs.

Innovative Technology Reduces Power Plant Emissions - Commercialization Success

NASA Technical Reports Server (NTRS)

Parrish, Clyde

2004-01-01

Emission control system development includes: (1) Development of new oxidizer scrubber system to eliminate NOx waste and produce fertilizer (2) Technology licensed and a 1 to 3 MWatt-scale prototype installed on. power plant (3) Development of method to oxidize NO. to N02 (4) Experience gained from licensing NASA technology

Movements of domestic sheep in the presence of livestock guardian dogs

USDA-ARS?s Scientific Manuscript database

As a result of successful predator reintroductions, livestock are experiencing increased predation in many parts of the US relative to that witnessed just a few decades ago. Of the methods used to reduce predation on livestock, livestock guardian dogs (LGDs) have been the most effective. The use of ...

Training Programs for Observers of Behavior; A Review.

ERIC Educational Resources Information Center

Spool, Mark D.

1978-01-01

This review covers the past 25 years of research literature on training observers of behavior, specifically in the areas of interviewing, reducing rater bias, interpersonal perception and observation as a research tool. The focus is on determining the most successful training methods and their theoretical bases. (Author/SJL)

Nest visits and capture events affect breeding success of Yellow-billed and Pacific loons

USGS Publications Warehouse

Uher-Koch, Brian D.; Schmutz, Joel A.; Wright, Kenneth G.

2015-01-01

Accurate estimates of breeding success are essential for understanding population dynamics and for managing populations. Unfortunately, research activities to collect these data can negatively impact the breeding success of the study species and bias estimates of breeding success. Despite the potential for negative impacts, few studies have documented the effect of capturing incubating adults on nest survival or compared nest survival following different capture methods. In this study we evaluate the impacts of investigator disturbance associated with captures and nest visits on nest survival of Yellow-billed Loons (Gavia adamsii) and Pacific Loons (Gavia pacifica) in the National Petroleum Reserve-Alaska (NPR-A), an area of conservation concern, in 2011–2013. In an effort to reduce capture-related nest failures, we developed a new suspended dive net technique to catch territorial aquatic birds while off their nests. We then compared nest survival following suspended dive net captures to bow-net trap captures of breeding adult loons. Daily nest survival following bow-net trap or suspended dive net capture was about 30% lower than when adults were not captured. The effect of captures on nest survival was similar between bow-net trap and suspended dive net capture methods. Nest visits without captures also negatively impacted nest survival, although less than captures. If not accounted for, nest visitation biased daily survival rates of nests downward 6%. Effects of investigator disturbance did not differ by species or between years. Our results suggest that any source of disturbance that displaces incubating adult loons could potentially reduce nest survival. To maximize breeding success, human disturbance factors should be limited near loon nests.

Inhalation Conscious Sedation with Nitrous Oxide and Oxygen as Alternative to General Anesthesia in Precooperative, Fearful, and Disabled Pediatric Dental Patients: A Large Survey on 688 Working Sessions.

PubMed

Galeotti, Angela; Garret Bernardin, Annelyse; D'Antò, Vincenzo; Ferrazzano, Gianmaria Fabrizio; Gentile, Tina; Viarani, Valeria; Cassabgi, Giorgio; Cantile, Tiziana

2016-01-01

Aim . To evaluate the effectiveness and the tolerability of the nitrous oxide sedation for dental treatment on a large pediatric sample constituting precooperative, fearful, and disabled patients. Methods . 472 noncooperating patients (aged 4 to 17) were treated under conscious sedation. The following data were calculated: average age; gender distribution; success/failure; adverse effects; number of treatments; kind of dental procedure undertaken; number of dental procedures for each working session; number of working sessions for each patient; differences between males and females and between healthy and disabled patients in relation to success; success in relation to age; and level of cooperation using Venham score. Results . 688 conscious sedations were carried out. The success was 86.3%. Adverse effects occurred in 2.5%. 1317 dental procedures were performed. In relation to the success, there was a statistically significant difference between healthy and disabled patients. Sex and age were not significant factors for the success. Venham score was higher at the first contact with the dentist than during the treatment. Conclusions . Inhalation conscious sedation represented an effective and safe method to obtain cooperation, even in very young patients, and it could reduce the number of pediatric patients referred to hospitals for general anesthesia.

Inhalation Conscious Sedation with Nitrous Oxide and Oxygen as Alternative to General Anesthesia in Precooperative, Fearful, and Disabled Pediatric Dental Patients: A Large Survey on 688 Working Sessions

PubMed Central

Galeotti, Angela; Garret Bernardin, Annelyse; D'Antò, Vincenzo; Viarani, Valeria; Cassabgi, Giorgio

2016-01-01

Aim. To evaluate the effectiveness and the tolerability of the nitrous oxide sedation for dental treatment on a large pediatric sample constituting precooperative, fearful, and disabled patients. Methods. 472 noncooperating patients (aged 4 to 17) were treated under conscious sedation. The following data were calculated: average age; gender distribution; success/failure; adverse effects; number of treatments; kind of dental procedure undertaken; number of dental procedures for each working session; number of working sessions for each patient; differences between males and females and between healthy and disabled patients in relation to success; success in relation to age; and level of cooperation using Venham score. Results. 688 conscious sedations were carried out. The success was 86.3%. Adverse effects occurred in 2.5%. 1317 dental procedures were performed. In relation to the success, there was a statistically significant difference between healthy and disabled patients. Sex and age were not significant factors for the success. Venham score was higher at the first contact with the dentist than during the treatment. Conclusions. Inhalation conscious sedation represented an effective and safe method to obtain cooperation, even in very young patients, and it could reduce the number of pediatric patients referred to hospitals for general anesthesia. PMID:27747238

Cannulation in patients with large periampullary diverticulum using SpyBite miniforceps.

PubMed

Balkrishanan, Mahadevan; Jain, Mayank; Snk, Chenduran; Cg, Sridhar; Ramakrishnan, Ravi; Venkataraman, Jayanthi

2018-03-01

Cannulation is difficult in patients with periampullary diverticulum (PAD). The described success rate varies from 61% to 95.4%. Four cases with PAD in which, despite repeated attempts, we were unable to locate the papilla and cannulate. To overcome this difficulty, we used SpyBite forceps (Boston Scientific) to pull out the papillary orifice and then perform the cannulation using a sphincterotome introduced through the same working channel. This method reduced the time required for cannulation. In all four of our cases, we had 100% success in cannulation. Use of SpyBite miniforceps in difficult cannulations in patients with PAD is useful and has an excellent success rate.

Validation sampling can reduce bias in health care database studies: an illustration using influenza vaccination effectiveness.

PubMed

Nelson, Jennifer Clark; Marsh, Tracey; Lumley, Thomas; Larson, Eric B; Jackson, Lisa A; Jackson, Michael L

2013-08-01

Estimates of treatment effectiveness in epidemiologic studies using large observational health care databases may be biased owing to inaccurate or incomplete information on important confounders. Study methods that collect and incorporate more comprehensive confounder data on a validation cohort may reduce confounding bias. We applied two such methods, namely imputation and reweighting, to Group Health administrative data (full sample) supplemented by more detailed confounder data from the Adult Changes in Thought study (validation sample). We used influenza vaccination effectiveness (with an unexposed comparator group) as an example and evaluated each method's ability to reduce bias using the control time period before influenza circulation. Both methods reduced, but did not completely eliminate, the bias compared with traditional effectiveness estimates that do not use the validation sample confounders. Although these results support the use of validation sampling methods to improve the accuracy of comparative effectiveness findings from health care database studies, they also illustrate that the success of such methods depends on many factors, including the ability to measure important confounders in a representative and large enough validation sample, the comparability of the full sample and validation sample, and the accuracy with which the data can be imputed or reweighted using the additional validation sample information. Copyright © 2013 Elsevier Inc. All rights reserved.

Effects of topsoil treatments on afforestation in a dry Mediterranean climate (southern Spain)

NASA Astrophysics Data System (ADS)

Hueso-González, Paloma; Francisco Martínez-Murillo, Juan; Damian Ruiz-Sinoga, Jose

2016-10-01

Afforestation programs in semiarid areas are associated with a high level of sapling mortality. Therefore, the development of alternative low-cost and low-environmental-impact afforestation methods that ensure the survival of seedlings is crucial for improving the efficiency of Mediterranean forest management. This study assessed the effects of five types of soil amendments on the afforestation success (e.g., plant growth and survival) of a Mediterranean semiarid area. The amendments tested were (i) straw mulch; (ii) mulch containing chipped branches of Aleppo pine (Pinus halepensis L.); (iii) sheep manure compost; (iv) sewage sludge from a wastewater treatment plant; and (v) TerraCottem hydroabsorbent polymer. We hypothesized that in the context of dry Mediterranean climatic conditions, the use of organic amendments would enhance plant establishment and ensure successful afforestation. The results showed that afforestation success varied among the various soil amendment treatments in the experimental plots. The amendments had no effect on soil organic carbon, pH, or salinity, but the results indicated that the addition of mulch or hydroabsorbent polymer can reduce transplant stress by increasing the soil water available for plant growth throughout the hydrological year, and potentially improve the success of afforestation by reducing plant mortality.

The dilemma of controlling cultural eutrophication of lakes

PubMed Central

Schindler, David W.

2012-01-01

The management of eutrophication has been impeded by reliance on short-term experimental additions of nutrients to bottles and mesocosms. These measures of proximate nutrient limitation fail to account for the gradual changes in biogeochemical nutrient cycles and nutrient fluxes from sediments, and succession of communities that are important components of whole-ecosystem responses. Erroneous assumptions about ecosystem processes and lack of accounting for hysteresis during lake recovery have further confused management of eutrophication. I conclude that long-term, whole-ecosystem experiments and case histories of lake recovery provide the only reliable evidence for policies to reduce eutrophication. The only method that has had proven success in reducing the eutrophication of lakes is reducing input of phosphorus. There are no case histories or long-term ecosystem-scale experiments to support recent claims that to reduce eutrophication of lakes, nitrogen must be controlled instead of or in addition to phosphorus. Before expensive policies to reduce nitrogen input are implemented, they require ecosystem-scale verification. The recent claim that the ‘phosphorus paradigm’ for recovering lakes from eutrophication has been ‘eroded’ has no basis. Instead, the case for phosphorus control has been strengthened by numerous case histories and large-scale experiments spanning several decades. PMID:22915669

Performance of Nonlinear Finite-Difference Poisson-Boltzmann Solvers

PubMed Central

Cai, Qin; Hsieh, Meng-Juei; Wang, Jun; Luo, Ray

2014-01-01

We implemented and optimized seven finite-difference solvers for the full nonlinear Poisson-Boltzmann equation in biomolecular applications, including four relaxation methods, one conjugate gradient method, and two inexact Newton methods. The performance of the seven solvers was extensively evaluated with a large number of nucleic acids and proteins. Worth noting is the inexact Newton method in our analysis. We investigated the role of linear solvers in its performance by incorporating the incomplete Cholesky conjugate gradient and the geometric multigrid into its inner linear loop. We tailored and optimized both linear solvers for faster convergence rate. In addition, we explored strategies to optimize the successive over-relaxation method to reduce its convergence failures without too much sacrifice in its convergence rate. Specifically we attempted to adaptively change the relaxation parameter and to utilize the damping strategy from the inexact Newton method to improve the successive over-relaxation method. Our analysis shows that the nonlinear methods accompanied with a functional-assisted strategy, such as the conjugate gradient method and the inexact Newton method, can guarantee convergence in the tested molecules. Especially the inexact Newton method exhibits impressive performance when it is combined with highly efficient linear solvers that are tailored for its special requirement. PMID:24723843

Alternative Models for Large-Group Introductory Earth Science Courses: Dual-Structured Model

ERIC Educational Resources Information Center

Carpenter, John R.; And Others

1978-01-01

An introductory college course in which both the instructional staff and students have input into the content has been successfully implemented into a spectrum of instructor-centered to student-centered introductory earth science courses. Grading by point accumulation method reduced the grade threat and induced student responsibility for learning.…

School Social Workers' Perceived Efficacy at Tasks Related to Curbing Suspension and Undesirable Behaviors

ERIC Educational Resources Information Center

Teasley, Martell L.; Miller, Christina R.

2011-01-01

This study explores school social workers' perceptions of their ability to successfully engage in practice tasks that reduce the likelihood of school suspension and undesirable behaviors among racial and ethnic groups within diverse geographical locations (urban, suburban, and rural). Using survey research methods with a convenience sample, 201…

Innovative Technology Reduces Power Plant Emissions-Commercialization Success

NASA Technical Reports Server (NTRS)

Parrish, Clyde; Chung, Landy

2004-01-01

Overview of emission control system development: (1) Development of new oxidizer scrubber system to eliminate NOx waste and produce fertilizer (2) Technology licensed and a 1 to 3 MWatt-scale prototype installed on power plant (3) Development of method to oxidize NO to NO2 (4) Experience gained from licensing NASA technology.

Distance Teaching: A Catalyst for Curriculum Change for Introducing Vocational Subjects.

ERIC Educational Resources Information Center

Jenkins, Janet; And Others

Distance education offers a set of techniques through which new content can be rapidly and effectively introduced into schools. Its growing importance is due to these key factors: educational expansion, democratization of education, improving quality, and reducing costs. If distance teaching methods are to be used successfully for curriculum…

Characterizing a point mutation within the UL5 gene that reduces in vivo replication and MD incidence

USDA-ARS?s Scientific Manuscript database

Marek’s disease virus (MDV) is an oncogenic alphaherpesvirus of chickens and the causative agent for Marek’s disease (MD). Vaccination is the primary method to control MD. Despite the success of vaccination, more virulent field strains are evolving, requiring the development of new vaccines. Attenua...

School Compost Programs: Pathways to Success

ERIC Educational Resources Information Center

Schumpert, Kary; Dietz, Cyndra

2012-01-01

After the oft-repeated three Rs (reduce, reuse, recycle) comes the lesser-known but equally important fourth R: rot. In this case, rot means compost. Classrooms, schools, and school districts can use a number of methods to establish a compost program. The finished product is a valuable soil amendment that adds fertility to local farmland, school…

Changes of Pain Perception, Autonomic Function, and Endocrine Parameters during Treatment of Anorectic Adolescents

ERIC Educational Resources Information Center

Bar, Karl-Jurgen; Boettger, Silke; Wagner, Gerd; Wilsdorf, Christine; Gerhard, Uwe Jens; Boettger, Michael K.; Blanz, Bernhard; Sauer, Heinrich

2006-01-01

Objectives: The underlying mechanisms of reduced pain perception in anorexia nervosa (AN) are unknown. To gain more insight into the pathology, the authors investigated pain perception, autonomic function, and endocrine parameters before and during successful treatment of adolescent AN patients. Method: Heat pain perception was assessed in 15…

Development, optimization, validation and application of faster gas chromatography - flame ionization detector method for the analysis of total petroleum hydrocarbons in contaminated soils.

PubMed

Zubair, Abdulrazaq; Pappoe, Michael; James, Lesley A; Hawboldt, Kelly

2015-12-18

This paper presents an important new approach to improving the timeliness of Total Petroleum Hydrocarbon (TPH) analysis in the soil by Gas Chromatography - Flame Ionization Detector (GC-FID) using the CCME Canada-Wide Standard reference method. The Canada-Wide Standard (CWS) method is used for the analysis of petroleum hydrocarbon compounds across Canada. However, inter-laboratory application of this method for the analysis of TPH in the soil has often shown considerable variability in the results. This could be due, in part, to the different gas chromatography (GC) conditions, other steps involved in the method, as well as the soil properties. In addition, there are differences in the interpretation of the GC results, which impacts the determination of the effectiveness of remediation at hydrocarbon-contaminated sites. In this work, multivariate experimental design approach was used to develop and validate the analytical method for a faster quantitative analysis of TPH in (contaminated) soil. A fractional factorial design (fFD) was used to screen six factors to identify the most significant factors impacting the analysis. These factors included: injection volume (μL), injection temperature (°C), oven program (°C/min), detector temperature (°C), carrier gas flow rate (mL/min) and solvent ratio (v/v hexane/dichloromethane). The most important factors (carrier gas flow rate and oven program) were then optimized using a central composite response surface design. Robustness testing and validation of model compares favourably with the experimental results with percentage difference of 2.78% for the analysis time. This research successfully reduced the method's standard analytical time from 20 to 8min with all the carbon fractions eluting. The method was successfully applied for fast TPH analysis of Bunker C oil contaminated soil. A reduced analytical time would offer many benefits including an improved laboratory reporting times, and overall improved clean up efficiency. The method was successfully applied for the analysis of TPH of Bunker C oil in contaminated soil. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Adaptive single-pixel imaging with aggregated sampling and continuous differential measurements

NASA Astrophysics Data System (ADS)

Huo, Yaoran; He, Hongjie; Chen, Fan; Tai, Heng-Ming

2018-06-01

This paper proposes an adaptive compressive imaging technique with one single-pixel detector and single arm. The aggregated sampling (AS) method enables the reduction of resolutions of the reconstructed images. It aims to reduce the time and space consumption. The target image with a resolution up to 1024 × 1024 can be reconstructed successfully at the 20% sampling rate. The continuous differential measurement (CDM) method combined with a ratio factor of significant coefficient (RFSC) improves the imaging quality. Moreover, RFSC reduces the human intervention in parameter setting. This technique enhances the practicability of single-pixel imaging with the benefits from less time and space consumption, better imaging quality and less human intervention.

Iterative raw measurements restoration method with penalized weighted least squares approach for low-dose CT

NASA Astrophysics Data System (ADS)

Takahashi, Hisashi; Goto, Taiga; Hirokawa, Koichi; Miyazaki, Osamu

2014-03-01

Statistical iterative reconstruction and post-log data restoration algorithms for CT noise reduction have been widely studied and these techniques have enabled us to reduce irradiation doses while maintaining image qualities. In low dose scanning, electronic noise becomes obvious and it results in some non-positive signals in raw measurements. The nonpositive signal should be converted to positive signal so that it can be log-transformed. Since conventional conversion methods do not consider local variance on the sinogram, they have difficulty of controlling the strength of the filtering. Thus, in this work, we propose a method to convert the non-positive signal to the positive signal by mainly controlling the local variance. The method is implemented in two separate steps. First, an iterative restoration algorithm based on penalized weighted least squares is used to mitigate the effect of electronic noise. The algorithm preserves the local mean and reduces the local variance induced by the electronic noise. Second, smoothed raw measurements by the iterative algorithm are converted to the positive signal according to a function which replaces the non-positive signal with its local mean. In phantom studies, we confirm that the proposed method properly preserves the local mean and reduce the variance induced by the electronic noise. Our technique results in dramatically reduced shading artifacts and can also successfully cooperate with the post-log data filter to reduce streak artifacts.

Recruitment methods employed in the prostate, lung, colorectal, and ovarian cancer screening trial

PubMed Central

Gren, Lisa; Broski, Karen; Childs, Jeffery; Cordes, Jill; Engelhard, Deborah; Gahagan, Betsy; Gamito, Eduard; Gardner, Vivien; Geisser, Mindy; Higgins, Darlene; Jenkins, Victoria; Lamerato, Lois; Lappe, Karen; Lowery, Heidi; McGuire, Colleen; Miedzinski, Mollie; Ogden, Sheryl; Tenorio, Sally; Watt, Gavin; Wohlers, Bonita; Marcus, Pamela

2015-01-01

Background The Prostate, Lung, Colorectal and Ovarian Cancer Screening Trial (PLCO) is a US National Cancer Institute (NCI)-funded randomized controlled trial designed to evaluate whether certain screening tests reduce mortality from prostate, lung, colorectal, and ovarian cancer. To obtain adequate statistical power, it was necessary to enroll over 150,000 healthy volunteers. Recruitment began in 1993 and ended in 2001. Purpose Our goal is to evaluate the success of recruitment methods employed by the 10 PLCO screening centers. We also provide estimates of recruitment yield and cost for our most successful strategy, direct mail. Methods Each screening center selected its own methods of recruitment. Methods changed throughout the recruitment period as needed. For this manuscript, representatives from each screening center provided information on methods utilized and their success. Results In the United States between 1993 and 2001, ten screening centers enrolled 154,934 study participants. Based on participant self-report, an estimated 95% of individuals were recruited by direct mail. Overall, enrollment yield for direct mail was 1.0%. Individual center enrollment yield ranged from 0.7% to 3.8%. Cost per enrolled participant was $9.64–35.38 for direct mail, excluding personnel costs. Limitations Numeric data on recruitment processes were not kept consistently at individual screening centers. Numeric data in this manuscript are based on the experiences of 5 of the 10 centers. Conclusions Direct mail, using rosters of names and addresses from profit and not-for-profit (including government) organizations, was the most successful and most often used recruitment method. Other recruitment strategies, such as community outreach and use of mass media, can be an important adjunct to direct mail in recruiting minority populations. PMID:19254935

The Pixon Method for Data Compression Image Classification, and Image Reconstruction

NASA Technical Reports Server (NTRS)

Puetter, Richard; Yahil, Amos

2002-01-01

As initially proposed, this program had three goals: (1) continue to develop the highly successful Pixon method for image reconstruction and support other scientist in implementing this technique for their applications; (2) develop image compression techniques based on the Pixon method; and (3) develop artificial intelligence algorithms for image classification based on the Pixon approach for simplifying neural networks. Subsequent to proposal review the scope of the program was greatly reduced and it was decided to investigate the ability of the Pixon method to provide superior restorations of images compressed with standard image compression schemes, specifically JPEG-compressed images.

Towards the development of universal, fast and highly accurate docking/scoring methods: a long way to go

PubMed Central

Moitessier, N; Englebienne, P; Lee, D; Lawandi, J; Corbeil, C R

2008-01-01

Accelerating the drug discovery process requires predictive computational protocols capable of reducing or simplifying the synthetic and/or combinatorial challenge. Docking-based virtual screening methods have been developed and successfully applied to a number of pharmaceutical targets. In this review, we first present the current status of docking and scoring methods, with exhaustive lists of these. We next discuss reported comparative studies, outlining criteria for their interpretation. In the final section, we describe some of the remaining developments that would potentially lead to a universally applicable docking/scoring method. PMID:18037925

Iterative algorithm for reconstructing rotationally asymmetric surface deviation with pixel-level spatial resolution

NASA Astrophysics Data System (ADS)

Quan, Haiyang; Wu, Fan; Hou, Xi

2015-10-01

New method for reconstructing rotationally asymmetric surface deviation with pixel-level spatial resolution is proposed. It is based on basic iterative scheme and accelerates the Gauss-Seidel method by introducing an acceleration parameter. This modified Successive Over-relaxation (SOR) is effective for solving the rotationally asymmetric components with pixel-level spatial resolution, without the usage of a fitting procedure. Compared to the Jacobi and Gauss-Seidel method, the modified SOR method with an optimal relaxation factor converges much faster and saves more computational costs and memory space without reducing accuracy. It has been proved by real experimental results.

Prophylactic Nipple-Sparing Mastectomy and Direct-to-Implant Reconstruction of the Large and Ptotic Breast: Is Preshaping of the Challenging Breast a Key to Success?

PubMed

Gunnarsson, Gudjon L; Bille, Camilla; Reitsma, Laurens C; Wamberg, Peter; Thomsen, Jørn Bo

2017-09-01

Nipple-sparing mastectomy with simultaneous hammock technique direct-to-implant reconstruction is increasingly offered to patients opting for risk-reducing mastectomy. Despite this promising method, patients with macromastia and ptotic breasts remain a challenging group to treat satisfactorily and more often end up undergoing a difficult corrective procedure and experience an unacceptably high rate of failed reconstruction. The authors examined whether targeted preshaping mastopexy/reduction could prepare these patients for a successful nipple-sparing mastectomy/direct-to-implant reconstruction. Patients seeking risk-reducing nipple-sparing mastectomy/direct-to-implant reconstruction at the authors' institutions deemed unfit for a one-stage procedure based on their previous experience were offered a targeted two-stage, risk-reducing mastopexy/reduction followed by a delayed secondary nipple-sparing mastectomy and direct-to-implant reconstruction. Patients were followed up at 3 weeks and 6 or 12 months. Forty-four reconstructions were performed in 22 patients aged 43 years (range, 26 to 57 years). All 44 procedures were completed successfully without any failure or nipple-areola complex losses. Patients' median body mass index was 30 kg/m (range, 22 to 44 kg/m). Six patients were smokers and one had hypertension. Two patients underwent reoperation because of hematoma and fat necrosis. The authors' results demonstrate that a targeted preshaping mastopexy/reduction followed by nipple-sparing mastectomy/direct-to-implant reconstruction can be safely planned in women who opt for a risk-reducing mastectomy and can be performed successfully with a 3- to 4-month time span between operations. On the basis of these results and the superior cosmetic outcome, the two-stage approach has become the authors' standard of care in all such settings. Therapeutic, IV.

Observations on the Use of Seprafilm® on the Brachial Plexus in 249 Operations for Neurogenic Thoracic Outlet Syndrome

PubMed Central

Hammond, Sharon L.; Rao, Neal M.

2007-01-01

Purpose Seprafilm® was initially used successfully as a membrane to reduce abdominal adhesions. Subsequently it was tried in a number of other areas to reduce postoperative scarring. Seprafilm® was employed in this study to see if it would reduce postoperative scarring after supraclavicular thoracic outlet decompression for neurogenic thoracic outlet syndrome (NTOS). Material and methods There were 249 operations for primary NTOS (185) and recurrent NTOS (64). Seprafilm® was applied to the nerve roots at the end of each procedure. Diagnosis was established by careful history and extensive physical exam consisting of several provocative maneuvers. Scalene muscle block confirmed the diagnosis. Results Success rates for primary operations, 1–2 years postoperation were 74% for scalenectomy without first rib resection and 70% for scalenectomy with first rib resection. For reoperations, success rate for scalenectomy and neurolysis after transaxillary rib resection was 78% whereas success rate for neurolysis after supraclavicular scalenectomy was 68%. Seprafilm® did not significantly improve overall results compared to our results 15 years ago, although in reoperations there was a trend toward improvement with Seprafilm®. Observations in 10 reoperations after use of Seprafilm® revealed that there were fewer adhesions between fat pad and nerve roots, making it much easier to find the nerve roots. Recurrence was because of scar formation around individual nerve roots. Conclusion Seprafilm® made reoperations easier by reducing scarring between scalene fat pad and brachial plexus. However, it did not prevent scar tissue forming around the individual nerve roots nor did it significantly lower the failure rate for primary operations. The trend supported the use of Seprafilm® in reoperations. PMID:18780049

Validation sampling can reduce bias in healthcare database studies: an illustration using influenza vaccination effectiveness

PubMed Central

Nelson, Jennifer C.; Marsh, Tracey; Lumley, Thomas; Larson, Eric B.; Jackson, Lisa A.; Jackson, Michael

2014-01-01

Objective Estimates of treatment effectiveness in epidemiologic studies using large observational health care databases may be biased due to inaccurate or incomplete information on important confounders. Study methods that collect and incorporate more comprehensive confounder data on a validation cohort may reduce confounding bias. Study Design and Setting We applied two such methods, imputation and reweighting, to Group Health administrative data (full sample) supplemented by more detailed confounder data from the Adult Changes in Thought study (validation sample). We used influenza vaccination effectiveness (with an unexposed comparator group) as an example and evaluated each method’s ability to reduce bias using the control time period prior to influenza circulation. Results Both methods reduced, but did not completely eliminate, the bias compared with traditional effectiveness estimates that do not utilize the validation sample confounders. Conclusion Although these results support the use of validation sampling methods to improve the accuracy of comparative effectiveness findings from healthcare database studies, they also illustrate that the success of such methods depends on many factors, including the ability to measure important confounders in a representative and large enough validation sample, the comparability of the full sample and validation sample, and the accuracy with which data can be imputed or reweighted using the additional validation sample information. PMID:23849144

Cyanobacteria reduce quagga mussel (Dreissena rostriformis bugensis) spawning and fertilization success

USGS Publications Warehouse

Boegehold, Anna G; Johnson, Nicholas; Ran, Jeffrey L; Kashian, Donna R

2018-01-01

exposure to cyanobacteria can inhibit quagga mussel spawning and fertilization. We assessed spawning in the presence of serotonin, a known spawning inducer, where adult quagga mussels placed in individual vials were exposed to 13 cyanobacteria cultures and purified algal toxin (microcystin-LR) with artificial lake water as the control. Fertilization success was evaluated by combining eggs with sperm in conjunction with cyanobacteria, and enumerating zygote formation marked by cellular cleavage. Several cyanobacterial strains reduced spawning and fertilization success, but microcystin-LR had no effect. Fertilization was more sensitive to cyanobacteria than gamete release. Only 1 culture, Aphanizomenon flos-aquae, inhibited spawning, whereas 6 cultures consisting of Anabaena flos-aquae, Dolichospermum lemmermanii, Gloeotrichia echinulata, Lyngbya wollei, and 2 Microcystis aeruginosa isolates reduced fertilization rates by up to 44%. The effects of cyanobacteria on reproduction in invasive freshwater mussels in the wild have not yet been identified. However, our laboratory studies show that concentrations of cyanobacteria that are possible during bloom conditions probably limit reproduction. Reproductive consequences on wild populations may become more prevalent as cyanobacteria blooms occur earlier in the year, making overlap between blooms and mussel spawning more common. Describing the mechanism by which cyanobacteria inhibit spawning and fertilization could reveal novel control methods to limit reproduction of this invasive species.

An Efficient Method Coupling Kernel Principal Component Analysis with Adjoint-Based Optimal Control and Its Goal-Oriented Extensions

NASA Astrophysics Data System (ADS)

Thimmisetty, C.; Talbot, C.; Tong, C. H.; Chen, X.

2016-12-01

The representativeness of available data poses a significant fundamental challenge to the quantification of uncertainty in geophysical systems. Furthermore, the successful application of machine learning methods to geophysical problems involving data assimilation is inherently constrained by the extent to which obtainable data represent the problem considered. We show how the adjoint method, coupled with optimization based on methods of machine learning, can facilitate the minimization of an objective function defined on a space of significantly reduced dimension. By considering uncertain parameters as constituting a stochastic process, the Karhunen-Loeve expansion and its nonlinear extensions furnish an optimal basis with respect to which optimization using L-BFGS can be carried out. In particular, we demonstrate that kernel PCA can be coupled with adjoint-based optimal control methods to successfully determine the distribution of material parameter values for problems in the context of channelized deformable media governed by the equations of linear elasticity. Since certain subsets of the original data are characterized by different features, the convergence rate of the method in part depends on, and may be limited by, the observations used to furnish the kernel principal component basis. By determining appropriate weights for realizations of the stochastic random field, then, one may accelerate the convergence of the method. To this end, we present a formulation of Weighted PCA combined with a gradient-based means using automatic differentiation to iteratively re-weight observations concurrent with the determination of an optimal reduced set control variables in the feature space. We demonstrate how improvements in the accuracy and computational efficiency of the weighted linear method can be achieved over existing unweighted kernel methods, and discuss nonlinear extensions of the algorithm.

Reducing the number of templates for aligned-spin compact binary coalescence gravitational wave searches using metric-agnostic template nudging

NASA Astrophysics Data System (ADS)

Indik, Nathaniel; Fehrmann, Henning; Harke, Franz; Krishnan, Badri; Nielsen, Alex B.

2018-06-01

Efficient multidimensional template placement is crucial in computationally intensive matched-filtering searches for gravitational waves (GWs). Here, we implement the neighboring cell algorithm (NCA) to improve the detection volume of an existing compact binary coalescence (CBC) template bank. This algorithm has already been successfully applied for a binary millisecond pulsar search in data from the Fermi satellite. It repositions templates from overdense regions to underdense regions and reduces the number of templates that would have been required by a stochastic method to achieve the same detection volume. Our method is readily generalizable to other CBC parameter spaces. Here we apply this method to the aligned-single-spin neutron star-black hole binary coalescence inspiral-merger-ringdown gravitational wave parameter space. We show that the template nudging algorithm can attain the equivalent effectualness of the stochastic method with 12% fewer templates.

Interventions to reduce social isolation and loneliness among older people: an integrative review.

PubMed

Gardiner, Clare; Geldenhuys, Gideon; Gott, Merryn

2018-03-01

Loneliness and social isolation are major problems for older adults. Interventions and activities aimed at reducing social isolation and loneliness are widely advocated as a solution to this growing problem. The aim of this study was to conduct an integrative review to identify the range and scope of interventions that target social isolation and loneliness among older people, to gain insight into why interventions are successful and to determine the effectiveness of those interventions. Six electronic databases were searched from 2003 until January 2016 for literature relating to interventions with a primary or secondary outcome of reducing or preventing social isolation and/or loneliness among older people. Data evaluation followed Evidence for Policy and Practice Information and Co-ordinating Centre guidelines and data analysis was conducted using a descriptive thematic method for synthesising data. The review identified 38 studies. A range of interventions were described which relied on differing mechanisms for reducing social isolation and loneliness. The majority of interventions reported some success in reducing social isolation and loneliness, but the quality of evidence was generally weak. Factors which were associated with the most effective interventions included adaptability, a community development approach, and productive engagement. A wide range of interventions have been developed to tackle social isolation and loneliness among older people. However, the quality of the evidence base is weak and further research is required to provide more robust data on the effectiveness of interventions. Furthermore, there is an urgent need to further develop theoretical understandings of how successful interventions mediate social isolation and loneliness. © 2016 John Wiley & Sons Ltd.

Recombination-assisted megaprimer (RAM) cloning

PubMed Central

Mathieu, Jacques; Alvarez, Emilia; Alvarez, Pedro J.J.

2014-01-01

No molecular cloning technique is considered universally reliable, and many suffer from being too laborious, complex, or expensive. Restriction-free cloning is among the simplest, most rapid, and cost-effective methods, but does not always provide successful results. We modified this method to enhance its success rate through the use of exponential amplification coupled with homologous end-joining. This new method, recombination-assisted megaprimer (RAM) cloning, significantly extends the application of restriction-free cloning, and allows efficient vector construction with much less time and effort when restriction-free cloning fails to provide satisfactory results. The following modifications were made to the protocol:•Limited number of PCR cycles for both megaprimer synthesis and the cloning reaction to reduce error propagation.•Elimination of phosphorylation and ligation steps previously reported for cloning methods that used exponential amplification, through the inclusion of a reverse primer in the cloning reaction with a 20 base pair region of homology to the forward primer.•The inclusion of 1 M betaine to enhance both reaction specificity and yield. PMID:26150930

A survey of bacterial diversity from successive life stages of black soldier fly (Diptera: Stratiomyidae) by using 16S rDNA pyrosequencing.

PubMed

Zheng, Longyu; Crippen, Tawni L; Singh, Baneshwar; Tarone, Aaron M; Dowd, Scot; Yu, Ziniu; Wood, Thomas K; Tomberlin, Jeffery K

2013-05-01

Sustainable methods for managing waste associated with people and animals have been proposed in the past. Black soldier fly, Hermetia illucens (L.), larvae represent one of the more promising methods. Larvae reduce dry matter, bacteria, offensive odor, and house fly populations. Prepupae can be used as feedstuff for livestock. However, it is not known if such a method results in the proliferation of potential pathogens. Although some bacterial species have been cultured and identified from black soldier fly, a true appreciation of fly associated bacterial diversity is not known. Such information is needed to understand pathogen colonization on decomposing animal and plant waste in the presence of black soldier fly larvae as well as develop research strategies for maximizing the use of this fly to reduce waste without risking environmental harm. Using 454 sequencing, we surveyed bacterial diversity associated with successive life stages of the black soldier fly reared on plant material. Bacteria diversity classified (99.8%) across all life stages spanned six bacterial phyla with > or = 80% bootstrap support. Bacteroidetes and Proteobacteria were the most dominant phyla associated with the black soldier fly accounting for two-thirds of the fauna identified. Many of these bacteria would go undetected because of their inability to be cultured.

Direct amplification of casework bloodstains using the Promega PowerPlex(®) 21 PCR amplification system.

PubMed

Gray, Kerryn; Crowle, Damian; Scott, Pam

2014-09-01

A significant number of evidence items submitted to Forensic Science Service Tasmania (FSST) are blood swabs or bloodstained items. Samples from these items routinely undergo phenol:chloroform:isoamyl alcohol organic extraction and quantitative Polymerase Chain Reaction (qPCR) testing prior to PowerPlex(®) 21 amplification. This multi-step process has significant cost and timeframe implications in a fiscal climate of tightening government budgets, pressure towards improved operating efficiencies, and an increasing emphasis on rapid techniques better supporting intelligence-led policing. Direct amplification of blood and buccal cells on cloth and Whatman FTA™ card with PowerPlex(®) 21 has already been successfully implemented for reference samples, eliminating the requirement for sample pre-treatment. Scope for expanding this method to include less pristine casework blood swabs and samples from bloodstained items was explored in an endeavour to eliminate lengthy DNA extraction, purification and qPCR steps for a wider subset of samples. Blood was deposited onto a range of substrates including those historically found to inhibit STR amplification. Samples were collected with micro-punch, micro-swab, or both. The potential for further fiscal savings via reduced volume amplifications was assessed by amplifying all samples at full and reduced volume (25 and 13μL). Overall success rate data showed 80% of samples yielded a complete profile at reduced volume, compared to 78% at full volume. Particularly high success rates were observed for the blood on fabric/textile category with 100% of micro-punch samples yielding complete profiles at reduced volume and 85% at full volume. Following the success of this trial, direct amplification of suitable casework blood samples has been implemented at reduced volume. Significant benefits have been experienced, most noticeably where results from crucial items have been provided to police investigators prior to interview of suspects, and a coronial identification has been successfully completed in a short timeframe to avoid delay in the release of human remains to family members. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Supply and demand: application of Lean Six Sigma methods to improve drug round efficiency and release nursing time.

PubMed

Kieran, Maríosa; Cleary, Mary; De Brún, Aoife; Igoe, Aileen

2017-10-01

To improve efficiency, reduce interruptions and reduce the time taken to complete oral drug rounds. Lean Six Sigma methods were applied to improve drug round efficiency using a pre- and post-intervention design. A 20-bed orthopaedic ward in a large teaching hospital in Ireland. Pharmacy, nursing and quality improvement staff. A multifaceted intervention was designed which included changes in processes related to drug trolley organization and drug supply planning. A communications campaign aimed at reducing interruptions during nurse-led during rounds was also developed and implemented. Average number of interruptions, average drug round time and variation in time taken to complete drug round. At baseline, the oral drug round took an average of 125 min. Following application of Lean Six Sigma methods, the average drug round time decreased by 51 min. The average number of interruptions per drug round reduced from an average of 12 at baseline to 11 following intervention, with a 75% reduction in drug supply interruptions. Lean Six Sigma methodology was successfully employed to reduce interruptions and to reduce time taken to complete the oral drug round. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Elements for successful sensor-based process control {Integrated Metrology}

NASA Astrophysics Data System (ADS)

Butler, Stephanie Watts

1998-11-01

Current productivity needs have stimulated development of alternative metrology, control, and equipment maintenance methods. Specifically, sensor applications provide the opportunity to increase productivity, tighten control, reduce scrap, and improve maintenance schedules and procedures. Past experience indicates a complete integrated solution must be provided for sensor-based control to be used successfully in production. In this paper, Integrated Metrology is proposed as the term for an integrated solution that will result in a successful application of sensors for process control. This paper defines and explores the perceived four elements of successful sensor applications: business needs, integration, components, and form. Based upon analysis of existing successful commercially available controllers, the necessary business factors have been determined to be strong, measurable industry-wide business needs whose solution is profitable and feasible. This paper examines why the key aspect of integration is the decision making process. A detailed discussion is provided of the components of most importance to sensor based control: decision-making methods, the 3R's of sensors, and connectivity. A metric for one of the R's (resolution) is proposed to allow focus on this important aspect of measurement. A form for these integrated components which synergistically partitions various aspects of control at the equipment and MES levels to efficiently achieve desired benefits is recommended.

Evaluation of a reproductive index to estimate grasshopper sparrow and eastern meadowlark reproductive success

USGS Publications Warehouse

Althoff, Donald P.; Gipson, P.S.; Pontius, J.S.; Japuntich, R.D.

2009-01-01

We compared an index of reproductive success based on breeding behavior to actual nest fates of grasshopper sparrows (Ammodramus savannarum) and eastern meadowlarks (Sturnella magna) on 12 plots (4-ha). Concordance of results between the two methods was 58% for grasshopper sparrows and 42% for eastern meadowlarks on a plot-by-plot basis. The indirect method yielded higher estimates of reproductive activity than nest monitoring for the balance of the plots,. There was little evidence that brown-headed cowbird (Molothrus ater) parasitism influenced the estimates of reproductive success using the indirect method. We concluded that nests and about-to-fledge nestlings were missed during searches on some plots. It may be appropriate to use an indirect method to more efficiently survey territories and/or plots for species with hard-to-find nests or when monitoring large areas. Use of a reproductive index may be appropriate and more time-efficient than nest searching and monitoring for comparing management effects such as burning, grazing, haying, military training, and other localized disturbances that are likely to affect reproductive success of grasshopper sparrows and eastern meadowlarks. However, nest monitoring may be necessary for more precise estimates of productivity necessary for long-term monitoring. Nest monitoring results are also likely to allow for direct comparisons to results from other studies because the index method requires intimate knowledge of the species being evaluated - a factor that could lead to reduced precision because the experience level of technicians relying only on behavioral cues from study-to-study is likely to vary considerably.

Childhood Misfortune as a Threat to Successful Aging: Avoiding Disease

ERIC Educational Resources Information Center

Schafer, Markus H.; Ferraro, Kenneth F.

2012-01-01

Purpose: The purpose of this study was to examine whether childhood misfortune reduces the likelihood of being disease free in adulthood. Design and Methods: This article used a sample of 3,000+ American adults, aged 25-74, who were first interviewed in 1995 and reinterviewed in 2005. Logistic regression was used to estimate the odds of avoiding…

Putting out fire with gasoline: pitfalls in the silvicultural treatment of canopy fuels

Treesearch

Christopher R. Keyes; J. Morgan Varner

2007-01-01

There is little question that forest stand structure is directly related to fire behavior, and that canopy fuel structure may be altered using silvicultural methods to successfully modify forest fire behavior and reduce susceptibility to crown fire initiation and spread. Silvicultural treatments can remediate hazardous stand structures that have developed as a result...

Effectiveness of a Brief Home Parenting Intervention for Reducing Early Sexual Risks among Latino Adolescents: "Salud y Éxito"

ERIC Educational Resources Information Center

O'Donnell, Lydia; Fuxman, Shai

2017-01-01

Background: Teen pregnancy rates and related risks remain elevated among Latino teens. We tested the impact on youth sexual behaviors of a brief, culturally targeted, bilingual media intervention designed for parents of young adolescents. Methods: "Salud y éxito" (Health & Success) uses dramatic audio stories to model positive…

Can Pictures Promote the Acquisition of Sight-Word Reading? An Evaluation of Two Potential Instructional Strategies

ERIC Educational Resources Information Center

Richardson, Amy R.; Lerman, Dorothea C.; Nissen, Melissa A.; Luck, Kally M.; Neal, Ashley E.; Bao, Shimin; Tsami, Loukia

2017-01-01

Sight-word instruction can be a useful supplement to phonics-based methods under some circumstances. Nonetheless, few studies have evaluated the conditions under which pictures may be used successfully to teach sight-word reading. In this study, we extended prior research by examining two potential strategies for reducing the effects of…

A Review of Techniques for Minimizing Beaver and White-Tailed Deer Damage in Southern Hardwoods

Treesearch

Edward P. Hill; Douglas N. Lasher; R. Blake Roper

1978-01-01

Methods of reducing beaver and deer damage to hardwood forest resources are reviewed. Beaver controls considered were poisons, chemosterilants, predators, and trapping. Population reduction through trapping with 330 conibear traps for two weeks during two successive years effectively eliminates beaver from small watersheds and shows greater promise for control than...

Changes in Critical Thinking Skills Following a Course on Science and Pseudoscience: A Quasi-Experimental Study

ERIC Educational Resources Information Center

McLean, Carmen P.; Miller, Nathan A.

2010-01-01

We assessed changes in paranormal beliefs and general critical thinking skills among students (n = 23) enrolled in an experimental course designed to teach distinguishing science from pseudoscience and a comparison group of students (n = 30) in an advanced research methods course. On average, both courses were successful in reducing paranormal…

Final Technical Report: Collaborative Research Center for Nonlinear Simulation of Energetic Particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berk, Herbert L.

2018-02-15

The study of this project focused on developing a reduced nonlinear model to describe chirping processes in a fusion plasma. A successful method was developed with results clear enough to allow an analytic theory to be developed that replicates the long term response of a nonlinear phase space structure immersed in the MHD continnuum.

Anti-inflammatory, Analgesic and Antiulcer properties of Porphyra vietnamensis.

PubMed

Bhatia, Saurabh; Sharma, Kiran; Sharma, Ajay; Nagpal, Kalpana; Bera, Tanmoy

2015-01-01

Aim of the present work was to investigate the anti-inflammatory, analgesic and antiulcer effects of red seaweed Porphyra vietnamensis (P. vietnamenis). Aqueous (POR) and alcoholic (PE) fractions were successfully isolated from P. vietnamenis. Further biological investigations were performed using a classic test of paw edema induced by carrageenan, writhing induced by acetic acid, hot plate method and naproxen induced gastro-duodenal ulcer. Among the fractions POR showed better activity. POR and PE significantly (p < 0.05) reduced carrageenan induced paw edema in a dose dependent manner. In the writhing test POR significantly (p < 0.05) reduced abdominal writhes than PE. In hot plate method POR showed better analgesic activity than PE. POR showed comparable ulcers reducing potential (p<0.01) to that of omeprazole, and has more ulcer reducing potential then PE. The results of this study demonstrated that P. vietnamenis aqueous fraction possesses biological activity that is close to the standards taken for the treatment of peripheral painful or/and inflammatory and ulcer conditions.

Development of a clinical prediction rule to improve peripheral intravenous cannulae first attempt success in the emergency department and reduce post insertion failure rates: the Vascular Access Decisions in the Emergency Room (VADER) study protocol

PubMed Central

Carr, Peter J; Rippey, James C R; Cooke, Marie L; Bharat, Chrianna; Murray, Kevin; Higgins, Niall S; Foale, Aileen; Rickard, Claire M

2016-01-01

Introduction Peripheral intravenous cannula (PIVC) insertion is one of the most common clinical interventions performed in emergency care worldwide. However, factors associated with successful PIVC placement and maintenance are not well understood. This study seeks to determine the predictors of first time PIVC insertion success in emergency department (ED) and identify the rationale for removal of the ED inserted PIVC in patients admitted to the hospital ward. Reducing failed insertion attempts and improving peripheral intravenous cannulation practice could lead to better staff and patient experiences, as well as improving hospital efficiency. Methods and analysis We propose an observational cohort study of PIVC insertions in a patient population presenting to ED, with follow-up observation of the PIVC in subsequent admissions to the hospital ward. We will collect specific PIVC observational data such as; clinician factors, patient factors, device information and clinical practice variables. Trained researchers will gather ED PIVC insertion data to identify predictors of insertion success. In those admitted from the ED, we will determine the dwell time of the ED-inserted PIVC. Multivariate regression analyses will be used to identify factors associated with insertions success and PIVC failure and standard statistical validation techniques will be used to create and assess the effectiveness of a clinical predication rule. Ethics and dissemination The findings of our study will provide new evidence to improve insertion success rates in the ED setting and identify strategies to reduce premature device failure for patients admitted to hospital wards. Results will unravel a complexity of factors that contribute to unsuccessful PIVC attempts such as patient and clinician factors along with the products, technologies and infusates used. Trial registration number ACTRN12615000588594; Pre-results. PMID:26868942

The removal of pyroglutamic acid from monoclonal antibodies without denaturation of the protein chains.

PubMed

Werner, William E; Wu, Sylvia; Mulkerrin, Michael

2005-07-01

Typically, the removal of pyroglutamate from the protein chains of immunoglobulins with the enzyme pyroglutamate aminopeptidase requires the use of chaotropic and reducing agents, quite often with limited success. This article describes a series of optimization experiments using elevated temperatures and detergents to denature and stabilize the heavy chains of immunoglobulins such that the pyroglutamate at the amino terminal was accessible to enzymatic removal using the thermostable protease isolated from Pyrococcus furiosus. The detergent polysorbate 20 (Tween 20) was used successfully to facilitate the removal of pyroglutamate residues. A one-step digestion was developed using elevated temperatures and polysorbate 20, rather than chaotropic and reducing agents, with sample cleanup and preparation for Edman sequencing performed using a commercial cartridge containing the PVDF membrane. All of the immunoglobulins digested with this method yielded heavy chain sequence, but the extent of deblocking was immunglobulin dependent (typically>50%).

Modification method to reduce the impact of blood vessel on noncontact discrimination of human blood based on ;M+N; theory

NASA Astrophysics Data System (ADS)

Zhang, Linna; Ding, Hongyan; Lin, Ling; Wang, Yimin; Guo, Xin

2018-01-01

Noncontact discriminating human blood is significantly crucial for import-export ports and inspection and quarantine departments. We had already demonstrated that visible diffuse reflectance spectroscopy combining PLS-DA method can successfully realize noncontact human blood discrimination. However, the circulated blood vessels may be produced with different materials. The use of various kinds of blood tubes may have a negative effect on the discrimination, based on ;M+N; theory (Li et al., 2016). In this research, we explored the impact of different material of blood vessels, such as glass tube and plastic tube, on the prediction ability of the discrimination model. Furthermore, we searched for the modification method to reduce the influence from the blood tubes. Our work indicated that generalized diffuse reflectance method can greatly improve the discrimination accuracy. This research can greatly facilitate the application of noncontact discrimination method based on visible and near-infrared diffuse reflectance spectroscopy.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Demmer, Rick; Fox, Don; Reese, Stephen

The Idaho National Laboratory (INL) and the United Kingdom (UK) National Nuclear Laboratory (NNL) have been collaborating for several years on materials and methods for the fogged/misted introduction of fixatives into radiologically contaminated facilities. The objective of the project is to deliver a process for reducing airborne radiological and/or mercury contamination and affixing loose contamination in place, thereby reducing contamination risk to employees and decreasing D&D cost and schedule. The developed process provides a reliable, unmanned method of introducing a coating that captures and fixes contamination in place within facilities. The INL coating, termed FX2, has undergone extensive non-radiological testing,more » including determination that it is non-flammable, affixes contamination and flows well through unusual geometries (testing at Florida International University). A series of non-active fogging trials for activity knock/tie-down application have been completed at NNL Workington on behalf of Idaho National Laboratory (INL). These trials performed by the NNL employed commercially available agricultural fogging equipment and the INL’s knock/tie-down latex formulation (FX-2). This testing successfully demonstrated the ability of the fogging devices to successfully spray the FX-2 formulation within various scenarios, and prepared the project for a radioactive trial. The INL has also developed a mercury vapor reducing form of the coating termed FX-Hg, which has shown great promise in laboratory studies.« less

Reduction of radial-head subluxation in children by triage nurses in the emergency department: a cluster-randomized controlled trial

PubMed Central

Dixon, Andrew; Clarkin, Chantalle; Barrowman, Nick; Correll, Rhonda; Osmond, Martin H.; Plint, Amy C.

2014-01-01

Background: Radial-head subluxation is an easily identified and treated injury. We investigated whether triage nurses in the emergency department can safely reduce radial-head subluxation at rates that are not substantially lower than those of emergency department physicians. Methods: We performed an open, noninferiority, cluster-randomized control trial. Children aged 6 years and younger who presented to the emergency department with a presentation consistent with radial-head subluxation and who had sustained a known injury in the previous 12 hours were assigned to either nurse-initiated or physician-initiated treatment, depending on the day. The primary outcome was the proportion of children who had a successful reduction (return to normal arm usage). We used a noninferiority margin of 10%. Results: In total, 268 children were eligible for inclusion and 245 were included in the final analysis. Of the children assigned to receive physician-initiated care, 96.7% (117/121) had a successful reduction performed by a physician. Of the children assigned to receive nurse-treatment care, 84.7% (105/124) had a successful reduction performed by a nurse. The difference in the proportion of successful radial head subluxations between the groups was 12.0% (95% confidence interval [CI] 4.8% to 19.7%). Noninferiority of nurse-initiated radial head subluxation was not shown. Interpretation: In this trial, the rate of successful radial-head subluxation performed by nurses was inferior to the physician success rate. Although the success rate in the nurse-initiated care group did not meet the non-inferiority margin, nurses were able to reduce radial head subluxation for almost 85% of children who presented with probable radial-head subluxation. Trial registration: Clinical Trials.gov, no. NCT00993954. PMID:24664649

How guiding coalitions promote positive culture change in hospitals: a longitudinal mixed methods interventional study

PubMed Central

Bradley, Elizabeth H; Brewster, Amanda L; McNatt, Zahirah; Linnander, Erika L; Cherlin, Emily; Fosburgh, Heather; Ting, Henry H; Curry, Leslie A

2018-01-01

Background Quality collaboratives are widely endorsed as a potentially effective method for translating and spreading best practices for acute myocardial infarction (AMI) care. Nevertheless, hospital success in improving performance through participation in collaboratives varies markedly. We sought to understand what distinguished hospitals that succeeded in shifting culture and reducing 30-day risk-standardised mortality rate (RSMR) after AMI through their participation in the Leadership Saves Lives (LSL) collaborative. Procedures We conducted a longitudinal, mixed methods intervention study of 10 hospitals over a 2-year period; data included surveys of 223 individuals (response rates 83%–94% depending on wave) and 393 in-depth interviews with clinical and management staff most engaged with the LSL intervention in the 10 hospitals. We measured change in culture and RSMR, and key aspects of working related to team membership, turnover, level of participation and approaches to conflict management. Main findings The six hospitals that experienced substantial culture change and greater reductions in RSMR demonstrated distinctions in: (1) effective inclusion of staff from different disciplines and levels in the organisational hierarchy in the team guiding improvement efforts (referred to as the ‘guiding coalition’ in each hospital); (2) authentic participation in the work of the guiding coalition; and (3) distinct patterns of managing conflict. Guiding coalition size and turnover were not associated with success (p values>0.05). In the six hospitals that experienced substantial positive culture change, staff indicated that the LSL learnings were already being applied to other improvement efforts. Principal conclusions Hospitals that were most successful in a national quality collaborative to shift hospital culture and reduce RSMR showed distinct patterns in membership diversity, authentic participation and capacity for conflict management. PMID:29101290

Successfully Automating Library Consortia: Procedures To Facilitate Governance, Management and Cooperation. DataResearch Automation Guide Series, Number Three.

ERIC Educational Resources Information Center

Data Research Associates, Inc., St. Louis, MO.

Sharing a local automated library system will generally reduce the costs of automation for each participating library and will facilitate the sharing of resources. To set up a consortium, libraries must first identify and agree on governance issues and methods for dealing with these issues. Issues range from ownership, management, and location of…

U.S. ENVIRONMENTAL PROTECTION AGENCY'S PM SUPERSITES PROGRAM - A MAJOR SUCCESSFUL COLLABORATIVE AIR QUALITY PROGRAM SUPPORTING STATES AND REGIONAL ORGANIZATIONS IN THEIR APPROACHES TO REDUCE PM LEVELS IN AIR ON URBAN AND REGIONAL SCALES

EPA Science Inventory

The U.S. Environmental Protection Agency's Particulate Matter (PM) Supersites Program (Program) is a nationwide air quality methods, measurement, modeling, and data analysis program initiated through cooperative agreements with leading universities in the United States. The Progr...

The Effects of Online Courses for Student Success in Basic Skills Mathematics Classes at California Community Colleges

ERIC Educational Resources Information Center

Rey, Jason Goering

2010-01-01

Online education is a modality of teaching that has proliferated throughout higher education in such a rapid form and without any guidelines that its quality and merit is largely unknown, hotly debated, and still evolving. Institutions have used online education as a method of reducing costs and increasing enrollments and students have flocked to…

Differential Evolution algorithm applied to FSW model calibration

NASA Astrophysics Data System (ADS)

Idagawa, H. S.; Santos, T. F. A.; Ramirez, A. J.

2014-03-01

Friction Stir Welding (FSW) is a solid state welding process that can be modelled using a Computational Fluid Dynamics (CFD) approach. These models use adjustable parameters to control the heat transfer and the heat input to the weld. These parameters are used to calibrate the model and they are generally determined using the conventional trial and error approach. Since this method is not very efficient, we used the Differential Evolution (DE) algorithm to successfully determine these parameters. In order to improve the success rate and to reduce the computational cost of the method, this work studied different characteristics of the DE algorithm, such as the evolution strategy, the objective function, the mutation scaling factor and the crossover rate. The DE algorithm was tested using a friction stir weld performed on a UNS S32205 Duplex Stainless Steel.

Can social marketing approaches change community attitudes towards leprosy?

PubMed

Brown, Wendy

2006-06-01

This essay explores how the concept of social marketing can be employed to change attitudes towards leprosy. Firstly, the concept of social marketing is discussed, then the attitudes that people have about leprosy, the stigma that people with leprosy and their families may face, and the detrimental effects that this can have on their lives. The effect of knowledge and education on attitudes towards leprosy is discussed, as this can be a key component of social marketing campaigns. Various methods of social marketing used to change attitudes and reduce stigma are examined, such as mass media campaigns, school based education, methods which involve community leaders, and the integration and improvement of leprosy services. Principles of social marketing which can lead to the success of campaigns such as incorporating local beliefs are emphasized. The success of the social marketing campaign in Sri Lanka is described, which aimed to remove the fear of leprosy, and to encourage patients to seek and comply with treatment. Finally, it is argued that social marketing, used correctly, can be highly effective at changing community attitudes towards leprosy, reducing stigma and improving the lives of patients, who become able to seek treatment sooner as they lose their fear of stigmatization.

Successful validation of in vitro methods in toxicology by ZEBET, the National Centre for Alternatives in Germany at the BfR (Federal Institute for Risk Assessment).

PubMed

Spielmann, Horst; Grune, Barbara; Liebsch, Manfred; Seiler, Andrea; Vogel, Richard

2008-06-01

A short description of the history of the 3Rs concept is given, which was developed as the scientific concept to refine, reduce and replace animal experiments by Russel and Burch more than 40 years ago. In addition, the legal framework in Europe for developing alternatives to animal experiments is given and the current status of in vitro systems in pharmacology and toxicology is described including an update on metabolising systems. The decrease in experimental animal numbers during the past decade in Europe is illustrated by the situation in Germany and the contribution of international harmonisation of test guidelines on reducing animal numbers in regulatory testing is described. A review of the development of the principles of experimental validation is given and the 3T3 NRU in vitro phototoxicity test is used as an example for a successful validation study, which led to the acceptance of the first in vitro toxicity test for regulatory purposes by the OECD. Finally, the currently accepted alternative methods for standardisation and safety testing of drugs, biologicals and medical devices are summarised.

Lighting a dark corner.

PubMed

Choto, R

1998-01-01

In Karanga community, 410 km south of Harare, Zimbabwe, the Intermediate Technology Development Group's (ITDG) farming project has successfully improved household food security through its farming project. The ITDG encouraged the formation of 35 women's garden clubs that have allowed women to reduce their individual labor, become closer to each other, and incorporate improved farming methods to increase crop production. The ITDG started work in 1991, just before a severe drought in 1992 forced over 770,000 people to rely on aid for food. ITDG changed the unsuccessful, top-down approach of state agricultural workers to a more successful, bottom-up approach. It also reintroduced intercropping and integrated farming systems to compensate for the fact that the average number of households of six people manages with only about a hectare of land. Indigenous methods, such as intercropping onions for pest management, are reducing reliance on chemicals, and chicken and goal manure is used for fertilizer. In addition to improving food security and nutrition, the gardens are producing enough surplus vegetables for sale. ITDG has also assisted the drought-prone community in developing water conservation techniques that use infiltration pits and gravity to nourish the soil after the rains have stopped.

The reduction of intoxication and disorder in premises licensed to serve alcohol: an exploratory randomised controlled trial.

PubMed

Moore, Simon C; Brennan, Iain R; Murphy, Simon; Byrne, Ellie; Moore, Susan N; Shepherd, Jonathan P; Moore, Laurence

2010-10-14

Licensed premises offer a valuable point of intervention to reduce alcohol-related harm. To describe the research design for an exploratory trial examining the feasibility and acceptability of a premises-level intervention designed to reduce severe intoxication and related disorder. The study also aims to assess the feasibility of a potential future large scale effectiveness trial and provide information on key trial design parameters including inclusion criteria, premises recruitment methods, strategies to implement the intervention and trial design, outcome measures, data collection methods and intra-cluster correlations. A randomised controlled trial in licensed premises that had experienced at least one assault in the year preceding the intervention, documented in police or hospital Emergency Department (ED) records. Premises were recruited from four study areas by piloting four recruitment strategies of varying intensity. Thirty two licensed premises were grouped into matched pairs to reduce potential bias and randomly allocated to the control or intervention condition. The study included a nested process evaluation to provide information on intervention acceptability and implementation. Outcome measures included police-recorded violent incidents, assault-related attendances at each premises' local ED and patron Breath Alcohol Concentration assessed on exiting and entering study premises. The most successful recruitment method involved local police licensing officers and yielded a 100% success rate. Police-records of violence provided the most appropriate source of data about disorder at the premises level. The methodology of an exploratory trial is presented and despite challenges presented by the study environment it is argued an exploratory trial is warranted. Initial investigations in recruitment methods suggest that study premises should be recruited with the assistance of police officers. Police data were of sufficient quality to identify disorder and street surveys are a feasible method for measuring intoxication at the individual level. UKCRN 7090; ISRCTN: 80875696. Medical Research Council (G0701758) to Simon Moore, Simon Murphy, Laurence Moore and Jonathan Shepherd.

The reduction of intoxication and disorder in premises licensed to serve alcohol: An exploratory randomised controlled trial

PubMed Central

2010-01-01

Background Licensed premises offer a valuable point of intervention to reduce alcohol-related harm. Objective To describe the research design for an exploratory trial examining the feasibility and acceptability of a premises-level intervention designed to reduce severe intoxication and related disorder. The study also aims to assess the feasibility of a potential future large scale effectiveness trial and provide information on key trial design parameters including inclusion criteria, premises recruitment methods, strategies to implement the intervention and trial design, outcome measures, data collection methods and intra-cluster correlations. Design A randomised controlled trial in licensed premises that had experienced at least one assault in the year preceding the intervention, documented in police or hospital Emergency Department (ED) records. Premises were recruited from four study areas by piloting four recruitment strategies of varying intensity. Thirty two licensed premises were grouped into matched pairs to reduce potential bias and randomly allocated to the control or intervention condition. The study included a nested process evaluation to provide information on intervention acceptability and implementation. Outcome measures included police-recorded violent incidents, assault-related attendances at each premises' local ED and patron Breath Alcohol Concentration assessed on exiting and entering study premises. Results The most successful recruitment method involved local police licensing officers and yielded a 100% success rate. Police-records of violence provided the most appropriate source of data about disorder at the premises level. Conclusion The methodology of an exploratory trial is presented and despite challenges presented by the study environment it is argued an exploratory trial is warranted. Initial investigations in recruitment methods suggest that study premises should be recruited with the assistance of police officers. Police data were of sufficient quality to identify disorder and street surveys are a feasible method for measuring intoxication at the individual level. Trial registration UKCRN 7090; ISRCTN: 80875696 Funding Medical Research Council (G0701758) to Simon Moore, Simon Murphy, Laurence Moore and Jonathan Shepherd PMID:20946634

[Functions of participatory ergonomics programs in reducing work-related musculoskeletal disorders].

PubMed

Guo, M J; Liu, J J; Yao, H Y

2016-08-10

Work-related musculoskeletal disorders (MSDs) are most commonly seen in all the occupational non-fatal injuries and illnesses for workers, especially those who are involved in labor-intensive industries. Participatory ergonomics is frequently used to prevent musculoskeletal disorders. This paper gives an overview of a historical perspective on the use of participatory ergonomics approach in reducing the health effects of labor-intensive industries. Progress, barriers and facilitators on the organization, implementation and evaluation of participatory ergonomics programs are studied. Participatory ergonomics seems a successful method to develop, prioritize measures to prevent MSDs. Participatory ergonomics can help industries reduce musculoskeletal injuries and disorders, improve workplace condition and promote health conditions of the workers.

Cost-Effectiveness Analysis of Diagnostic Options for Pneumocystis Pneumonia (PCP)

PubMed Central

Harris, Julie R.; Marston, Barbara J.; Sangrujee, Nalinee; DuPlessis, Desiree; Park, Benjamin

2011-01-01

Background Diagnosis of Pneumocystis jirovecii pneumonia (PCP) is challenging, particularly in developing countries. Highly sensitive diagnostic methods are costly, while less expensive methods often lack sensitivity or specificity. Cost-effectiveness comparisons of the various diagnostic options have not been presented. Methods and Findings We compared cost-effectiveness, as measured by cost per life-years gained and proportion of patients successfully diagnosed and treated, of 33 PCP diagnostic options, involving combinations of specimen collection methods [oral washes, induced and expectorated sputum, and bronchoalveolar lavage (BAL)] and laboratory diagnostic procedures [various staining procedures or polymerase chain reactions (PCR)], or clinical diagnosis with chest x-ray alone. Our analyses were conducted from the perspective of the government payer among ambulatory, HIV-infected patients with symptoms of pneumonia presenting to HIV clinics and hospitals in South Africa. Costing data were obtained from the National Institutes of Communicable Diseases in South Africa. At 50% disease prevalence, diagnostic procedures involving expectorated sputum with any PCR method, or induced sputum with nested or real-time PCR, were all highly cost-effective, successfully treating 77–90% of patients at $26–51 per life-year gained. Procedures using BAL specimens were significantly more expensive without added benefit, successfully treating 68–90% of patients at costs of $189–232 per life-year gained. A relatively cost-effective diagnostic procedure that did not require PCR was Toluidine Blue O staining of induced sputum ($25 per life-year gained, successfully treating 68% of patients). Diagnosis using chest x-rays alone resulted in successful treatment of 77% of patients, though cost-effectiveness was reduced ($109 per life-year gained) compared with several molecular diagnostic options. Conclusions For diagnosis of PCP, use of PCR technologies, when combined with less-invasive patient specimens such as expectorated or induced sputum, represent more cost-effective options than any diagnostic procedure using BAL, or chest x-ray alone. PMID:21858013

Oxidation-resisting technology of W-Re thermocouples and their industrial applications

NASA Astrophysics Data System (ADS)

Wang, K.; Dai, M.; Dong, J.; Wang, L.; Wang, T.

2013-09-01

We use DSC/TG, SEM and EPMA approaches to investigate the high temperature oxidation behaviors of the Type C W-Re thermocouple wires and W-Re powders which the wires were made from. To solve the oxidization of W-Re thermocouples the chemical method, other than the commonly used physical method, i.e. vacuum-pumping method, was developed. Several solid-packed techniques such as stuffing with inert material, chemical deoxidizing, gas-absorbing and sealing were employed to prevent the W-Re thermocouples from oxidizing. Based on comprehensive consideration of various parameters in process industries, a series of industrial W-Re thermocouples has been successfully used in oxidizing and reducing atmospheres, high temperature alkali and other harsh environments. The service life is 6 to 12 months in strong oxidizing atmosphere of Cr2O3-Al2O3 brick kiln and 2 to 3 months in high temperature alkali and in reducing atmosphere of CO.

An Ensemble Successive Project Algorithm for Liquor Detection Using Near Infrared Sensor.

PubMed

Qu, Fangfang; Ren, Dong; Wang, Jihua; Zhang, Zhong; Lu, Na; Meng, Lei

2016-01-11

Spectral analysis technique based on near infrared (NIR) sensor is a powerful tool for complex information processing and high precision recognition, and it has been widely applied to quality analysis and online inspection of agricultural products. This paper proposes a new method to address the instability of small sample sizes in the successive projections algorithm (SPA) as well as the lack of association between selected variables and the analyte. The proposed method is an evaluated bootstrap ensemble SPA method (EBSPA) based on a variable evaluation index (EI) for variable selection, and is applied to the quantitative prediction of alcohol concentrations in liquor using NIR sensor. In the experiment, the proposed EBSPA with three kinds of modeling methods are established to test their performance. In addition, the proposed EBSPA combined with partial least square is compared with other state-of-the-art variable selection methods. The results show that the proposed method can solve the defects of SPA and it has the best generalization performance and stability. Furthermore, the physical meaning of the selected variables from the near infrared sensor data is clear, which can effectively reduce the variables and improve their prediction accuracy.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamanaka, Masashi; Dohmae, Takeshi; Hocker, Andy

We are developing the manufacturing method for superconducting radio frequency (SRF) cavities by using a hydroforming instead of using conventional electron beam welding. We expect higher reliability and reduced cost with hydroforming. For successful hydroforming, high-purity seamless niobium tubes with good formability as well as advancing the hydroforming technique are necessary. Using a seamless niobium tube from ATI Wah Chang, we were able to successfully hydroform a 1.3 GHz three-cell TESLA-like cavity and obtained an Eacc of 32 MV/m. A barrel polishing process was omitted after the hydroforming. The vertical test was carried out with very rough inside surface. Wemore » got amazing and interesting result.« less

Boosting quantum annealer performance via sample persistence

NASA Astrophysics Data System (ADS)

Karimi, Hamed; Rosenberg, Gili

2017-07-01

We propose a novel method for reducing the number of variables in quadratic unconstrained binary optimization problems, using a quantum annealer (or any sampler) to fix the value of a large portion of the variables to values that have a high probability of being optimal. The resulting problems are usually much easier for the quantum annealer to solve, due to their being smaller and consisting of disconnected components. This approach significantly increases the success rate and number of observations of the best known energy value in samples obtained from the quantum annealer, when compared with calling the quantum annealer without using it, even when using fewer annealing cycles. Use of the method results in a considerable improvement in success metrics even for problems with high-precision couplers and biases, which are more challenging for the quantum annealer to solve. The results are further enhanced by applying the method iteratively and combining it with classical pre-processing. We present results for both Chimera graph-structured problems and embedded problems from a real-world application.

Screening analysis of biodiesel feedstock using UV-vis, NIR and synchronous fluorescence spectrometries and the successive projections algorithm.

PubMed

Insausti, Matías; Gomes, Adriano A; Cruz, Fernanda V; Pistonesi, Marcelo F; Araujo, Mario C U; Galvão, Roberto K H; Pereira, Claudete F; Band, Beatriz S F

2012-08-15

This paper investigates the use of UV-vis, near infrared (NIR) and synchronous fluorescence (SF) spectrometries coupled with multivariate classification methods to discriminate biodiesel samples with respect to the base oil employed in their production. More specifically, the present work extends previous studies by investigating the discrimination of corn-based biodiesel from two other biodiesel types (sunflower and soybean). Two classification methods are compared, namely full-spectrum SIMCA (soft independent modelling of class analogies) and SPA-LDA (linear discriminant analysis with variables selected by the successive projections algorithm). Regardless of the spectrometric technique employed, full-spectrum SIMCA did not provide an appropriate discrimination of the three biodiesel types. In contrast, all samples were correctly classified on the basis of a reduced number of wavelengths selected by SPA-LDA. It can be concluded that UV-vis, NIR and SF spectrometries can be successfully employed to discriminate corn-based biodiesel from the two other biodiesel types, but wavelength selection by SPA-LDA is key to the proper separation of the classes. Copyright © 2012 Elsevier B.V. All rights reserved.

Electrospray ionization and time-of-flight mass spectrometric method for simultaneous determination of spermidine and spermine.

PubMed

Samejima, Keijiro; Otani, Masahiro; Murakami, Yasuko; Oka, Takami; Kasai, Misao; Tsumoto, Hiroki; Kohda, Kohfuku

2007-10-01

A sensitive method for the determination of polyamines in mammalian cells was described using electrospray ionization and time-of-flight mass spectrometer. This method was 50-fold more sensitive than the previous method using ionspray ionization and quadrupole mass spectrometer. The method employed the partial purification and derivatization of polyamines, but allowed a measurement of multiple samples which contained picomol amounts of polyamines. Time required for data acquisition of one sample was approximately 2 min. The method was successfully applied for the determination of reduced spermidine and spermine contents in cultured cells under the inhibition of aminopropyltransferases. In addition, a new proper internal standard was proposed for the tracer experiment using (15)N-labeled polyamines.

Reduced-Dimensionality Semiclassical Transition State Theory: Application to Hydrogen Atom Abstraction and Exchange Reactions of Hydrocarbons.

PubMed

Greene, Samuel M; Shan, Xiao; Clary, David C

2015-12-17

Quantum mechanical methods for calculating rate constants are often intractable for reactions involving many atoms. Semiclassical transition state theory (SCTST) offers computational advantages over these methods but nonetheless scales exponentially with the number of degrees of freedom (DOFs) of the system. Here we present a method with more favorable scaling, reduced-dimensionality SCTST (RD SCTST), that treats only a subset of DOFs of the system explicitly. We apply it to three H abstraction and exchange reactions for which two-dimensional potential energy surfaces (PESs) have previously been constructed and evaluated using RD quantum scattering calculations. We differentiated these PESs to calculate harmonic frequencies and anharmonic constants, which were then used to calculate cumulative reaction probabilities and rate constants by RD SCTST. This method yielded rate constants in good agreement with quantum scattering results. Notably, it performed well for a heavy-light-heavy reaction, even though it does not explicitly account for corner-cutting effects. Recent extensions to SCTST that improve its treatment of deep tunneling were also evaluated within the reduced-dimensionality framework. The success of RD SCTST in this study suggests its potential applicability to larger systems.

Accelerated Monte Carlo Methods for Coulomb Collisions

NASA Astrophysics Data System (ADS)

Rosin, Mark; Ricketson, Lee; Dimits, Andris; Caflisch, Russel; Cohen, Bruce

2014-03-01

We present a new highly efficient multi-level Monte Carlo (MLMC) simulation algorithm for Coulomb collisions in a plasma. The scheme, initially developed and used successfully for applications in financial mathematics, is applied here to kinetic plasmas for the first time. The method is based on a Langevin treatment of the Landau-Fokker-Planck equation and has a rich history derived from the works of Einstein and Chandrasekhar. The MLMC scheme successfully reduces the computational cost of achieving an RMS error ɛ in the numerical solution to collisional plasma problems from (ɛ-3) - for the standard state-of-the-art Langevin and binary collision algorithms - to a theoretically optimal (ɛ-2) scaling, when used in conjunction with an underlying Milstein discretization to the Langevin equation. In the test case presented here, the method accelerates simulations by factors of up to 100. We summarize the scheme, present some tricks for improving its efficiency yet further, and discuss the method's range of applicability. Work performed for US DOE by LLNL under contract DE-AC52- 07NA27344 and by UCLA under grant DE-FG02-05ER25710.

Space sickness predictors suggest fluid shift involvement and possible countermeasures

NASA Technical Reports Server (NTRS)

Simanonok, K. E.; Moseley, E. C.; Charles, J. B.

1992-01-01

Preflight data from 64 first time Shuttle crew members were examined retrospectively to predict space sickness severity (NONE, MILD, MODERATE, or SEVERE) by discriminant analysis. From 9 input variables relating to fluid, electrolyte, and cardiovascular status, 8 variables were chosen by discriminant analysis that correctly predicted space sickness severity with 59 pct. success by one method of cross validation on the original sample and 67 pct. by another method. The 8 variables in order of their importance for predicting space sickness severity are sitting systolic blood pressure, serum uric acid, calculated blood volume, serum phosphate, urine osmolality, environmental temperature at the launch site, red cell count, and serum chloride. These results suggest the presence of predisposing physiologic factors to space sickness that implicate a fluid shift etiology. Addition of a 10th input variable, hours spent in the Weightless Environment Training Facility (WETF), improved the prediction of space sickness severity to 66 pct. success by the first method of cross validation on the original sample and to 71 pct. by the second method. The data suggest that WETF training may reduce space sickness severity.

Effects of local anaesthesia or local anaesthesia plus a non-steroidal anti-inflammatory drug on the acute cortisol response of calves to five different methods of castration.

PubMed

Stafford, K J; Mellor, D J; Todd, S E; Bruce, R A; Ward, R N

2002-08-01

The cortisol response of calves to different methods of castration (ring, band, surgical, clamp) with or without local anaesthetic, or local anaesthetic plus a non-steroidal anti-inflammatory drug were recorded. All methods of castration caused a significant cortisol response and by inference pain and distress. Band castration caused a greater cortisol response than ring castration but the responses were eliminated by local anaesthetic. The cortisol response to surgical castration, by traction on the spermatic cords or by cutting across them with an emasculator, was not diminished by local anaesthetic but when ketoprofen was given with local anaesthetic the cortisol response was eliminated. Local anaesthetic did reduce the behavioural response to cutting the scrotum and handling the testes. Clamp castration caused the smallest cortisol response which was reduced or eliminated by local anaesthetic or local anesthetic plus ketoprofen respectively, but this method of castration was not always successful.

Optimization of the interplanetary trajectories of spacecraft with a solar electric propulsion power plant of minimal power

NASA Astrophysics Data System (ADS)

Ivanyukhin, A. V.; Petukhov, V. G.

2016-12-01

The problem of optimizing the interplanetary trajectories of a spacecraft (SC) with a solar electric propulsion system (SEPS) is examined. The problem of investigating the permissible power minimum of the solar electric propulsion power plant required for a successful flight is studied. Permissible ranges of thrust and exhaust velocity are analyzed for the given range of flight time and final mass of the spacecraft. The optimization is performed according to Portnyagin's maximum principle, and the continuation method is used for reducing the boundary problem of maximal principle to the Cauchy problem and to study the solution/ parameters dependence. Such a combination results in the robust algorithm that reduces the problem of trajectory optimization to the numerical integration of differential equations by the continuation method.

Searching for management approaches to reduce HAI transmission (SMART): a study protocol.

PubMed

McAlearney, Ann Scheck; Hefner, Jennifer L; Sieck, Cynthia J; Walker, Daniel M; Aldrich, Alison M; Sova, Lindsey N; Gaughan, Alice A; Slevin, Caitlin M; Hebert, Courtney; Hade, Erinn; Buck, Jacalyn; Grove, Michele; Huerta, Timothy R

2017-06-28

Healthcare-associated infections (HAIs) impact patients' lives through prolonged hospitalization, morbidity, and death, resulting in significant costs to both health systems and society. Central line-associated bloodstream infections (CLABSIs) and catheter-associated urinary tract infections (CAUTIs) are two of the most preventable HAIs. As a result, these HAIs have been the focus of significant efforts to identify evidence-based clinical strategies to reduce infection rates. The Comprehensive Unit-based Safety Program (CUSP) provides a formal model for translating CLABSI-reduction evidence into practice. Yet, a national demonstration project found organizations experienced variable levels of success using CUSP to reduce CLABSIs. In addition, in Fiscal year 2019, Medicare will expand use of CLABSI and CAUTI metrics beyond ICUs to the entire hospital for reimbursement purposes. As a result, hospitals need guidance about how to successfully translate HAI-reduction efforts such as CUSP to non-ICU settings (clinical practice), and how to shape context (management practice)-including culture and management strategies-to proactively support clinical teams. Using a mixed-methods approach to evaluate the contribution of management factors to successful HAI-reduction efforts, our study aims to: (1) Develop valid and reliable measures of structural management practices associated with the recommended CLABSI Management Strategies for use as a survey (HAI Management Practice Guideline Survey) to support HAI-reduction efforts in both medical/surgical units and ICUs; (2) Develop, validate, and then deploy the HAI Management Practice Guideline Survey, first across Ohio hospitals, then nationwide, to determine the positive predictive value of the measurement instrument as it relates to CLABSI- and CAUTI-prevention; and (3) Integrate findings into a Management Practices Toolkit for HAI reduction that includes an organization-specific data dashboard for monitoring progress and an implementation program for toolkit use, and disseminate that Toolkit nationwide. Providing hospitals with the tools they need to successfully measure management structures that support clinical care provides a powerful approach that can be leveraged to reduce the incidence of HAIs experienced by patients. This study is critical to providing the information necessary to successfully "make health care safer" by providing guidance on how contextual factors within a healthcare setting can improve patient safety across hospitals.

Sparse dynamics for partial differential equations

PubMed Central

Schaeffer, Hayden; Caflisch, Russel; Hauck, Cory D.; Osher, Stanley

2013-01-01

We investigate the approximate dynamics of several differential equations when the solutions are restricted to a sparse subset of a given basis. The restriction is enforced at every time step by simply applying soft thresholding to the coefficients of the basis approximation. By reducing or compressing the information needed to represent the solution at every step, only the essential dynamics are represented. In many cases, there are natural bases derived from the differential equations, which promote sparsity. We find that our method successfully reduces the dynamics of convection equations, diffusion equations, weak shocks, and vorticity equations with high-frequency source terms. PMID:23533273

Sparse dynamics for partial differential equations.

PubMed

Schaeffer, Hayden; Caflisch, Russel; Hauck, Cory D; Osher, Stanley

2013-04-23

We investigate the approximate dynamics of several differential equations when the solutions are restricted to a sparse subset of a given basis. The restriction is enforced at every time step by simply applying soft thresholding to the coefficients of the basis approximation. By reducing or compressing the information needed to represent the solution at every step, only the essential dynamics are represented. In many cases, there are natural bases derived from the differential equations, which promote sparsity. We find that our method successfully reduces the dynamics of convection equations, diffusion equations, weak shocks, and vorticity equations with high-frequency source terms.

Sub-Plate Overlap Code Documentation

NASA Technical Reports Server (NTRS)

Taff, L. G.; Bucciarelli, B.; Zarate, N.

1997-01-01

An expansion of the plate overlap method of astrometric data reduction to a single plate has been proposed and successfully tested. Each plate is (artificially) divided into sub-plates which can then be overlapped. This reduces the area of a 'plate' over which a plate model needs to accurately represent the relationship between measured coordinates and standard coordinates. Application is made to non-astrographic plates such as Schmidt plates and to wide-field astrographic plates. Indeed, the method is completely general and can be applied to any type of recording media.

Comparison of Airway Control Methods and Ventilation Success with an Automatic Resuscitator

DTIC Science & Technology

2015-10-08

REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour...completing and reviewing this collection of information . Send comments regarding this burden estimate or any other aspect of this collection of information ...including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations

Survey of Microcleaning Methods for Application to Army Coal-Fired Plants

DTIC Science & Technology

1989-02-01

Authority (TVA) has successfully reduced its cost of controlling SOX by combining postcombustion flue gas desulfurization equipment with precombustion coal...effective way of meeting the new standards for SOl Several options are available, in- cluding flue gas desulfurization , fluidized bed combustors, and...are available, including flue gas desulfurization , fluidized bed combustors, and precombustion cleaning. This report (Cont’d.) 20 DISTRIBUTION

Chaff seeding does not inhibit tree reproduction

Treesearch

George R., Jr. Trimble

1957-01-01

Seeding of grass and other herbaceous cover is a recognized method of reducing soil washing on old logging roads, trails, decks, and other disturbed areas. It is done to protect the quality of water supplies and, in the case of roads that are to be used again, to preserve them for use during the next logging operation. The successful use of chaff (from local harvest...

Implementation of Microcalorimeter Array Technology for Safeguards of Nuclear Material

NASA Astrophysics Data System (ADS)

Kossmann, Shannon; Mateju, Klara; Koehler, Katrina; Croce, Mark

2018-03-01

Safeguards of nuclear materials depend on both destructive and nondestructive assay (DA and NDA, respectively). Ultra-high-resolution microcalorimeter gamma spectroscopy has the potential to substantially reduce the performance gap between NDA and DA methods in determination of plutonium isotopic composition. This paper details the setup of a cryostat and microwave readout system for microcalorimeter gamma spectroscopy, the functionality of which has been successfully demonstrated.

Aerial Insecticide Treatments for Management of Dectes Stem Borer, Dectes texanus, in Soybean

PubMed Central

Sloderbeck, P. E.; Buschman, L.L.

2011-01-01

The Dectes stem borer, Dectes texanus LeConte (Coleoptera: Cerambycidae), is an increasingly important pest of soybean and sunflower in central North America. Nine large-scale field trials were conducted over a 3-year period to determine if Dectes stem borer could be managed with insecticide treatments. Aerial applications of lambda on July 6, 12 and 15 were successful in significantly reducing adults, but applications on July 1, 20 and 24 were less successful. These data suggest that for central Kansas two aerial applications may be required to control Dectes stem borers in soybean. Based on our experience the first application should be made at the peak of adult flight about July 5th and the second application 10 days later. The local treatment schedule should be developed to follow the local Dectes stem borer adult emergence pattern. Treated aerial strips 59 m (195 ft) wide were not large enough to prevent reinfestation, but treated half-circles (24 ha or 60 acres) were successful in reducing in Dectes stem borer infestation of soybean. Sweep net samples of adults were not successful in identifying a treatment threshold, so treatment decisions will need to be based on field history of infestation. Further studies are needed to identify better sampling methods that can be used to establish treatment thresholds and to refine the best timing for treatments. PMID:21861653

A Fast Multiple Sampling Method for Low-Noise CMOS Image Sensors With Column-Parallel 12-bit SAR ADCs.

PubMed

Kim, Min-Kyu; Hong, Seong-Kwan; Kwon, Oh-Kyong

2015-12-26

This paper presents a fast multiple sampling method for low-noise CMOS image sensor (CIS) applications with column-parallel successive approximation register analog-to-digital converters (SAR ADCs). The 12-bit SAR ADC using the proposed multiple sampling method decreases the A/D conversion time by repeatedly converting a pixel output to 4-bit after the first 12-bit A/D conversion, reducing noise of the CIS by one over the square root of the number of samplings. The area of the 12-bit SAR ADC is reduced by using a 10-bit capacitor digital-to-analog converter (DAC) with four scaled reference voltages. In addition, a simple up/down counter-based digital processing logic is proposed to perform complex calculations for multiple sampling and digital correlated double sampling. To verify the proposed multiple sampling method, a 256 × 128 pixel array CIS with 12-bit SAR ADCs was fabricated using 0.18 μm CMOS process. The measurement results shows that the proposed multiple sampling method reduces each A/D conversion time from 1.2 μs to 0.45 μs and random noise from 848.3 μV to 270.4 μV, achieving a dynamic range of 68.1 dB and an SNR of 39.2 dB.

Antifungal activity of gold nanoparticles prepared by solvothermal method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahmad, Tokeer, E-mail: tahmad3@jmi.ac.in; Wani, Irshad A.; Lone, Irfan H.

2013-01-15

Graphical abstract: Gold nanoparticles (7 and 15 nm) of very high surface area (329 and 269 m{sup 2}/g) have been successfully synthesized through solvothermal method by using tin chloride and sodium borohydride as reducing agents. As-prepared gold nanoparticles shows very excellent antifungal activity against Candida isolates and activity increases with decrease in the particle size. Display Omitted Highlights: ► Effect of reducing agents on the morphology of gold nanoparticles. ► Highly uniform and monodisperse gold nanoparticles (7 nm). ► Highest surface area of gold nanoparticles (329 m{sup 2/}g). ► Excellent antifungal activity of gold nanoparticles against Candida strains. -- Abstract:more » Gold nanoparticles have been successfully synthesized by solvothermal method using SnCl{sub 2} and NaBH{sub 4} as reducing agents. X-ray diffraction studies show highly crystalline and monophasic nature of the gold nanoparticles with face centred cubic structure. The transmission electron microscopic studies show the formation of nearly spherical gold nanoparticles of average size of 15 nm using SnCl{sub 2}, however, NaBH{sub 4} produced highly uniform, monodispersed and spherical gold nanoparticles of average grain size of 7 nm. A high surface area of 329 m{sup 2}/g for 7 nm and 269 m{sup 2}/g for 15 nm gold nanoparticles was observed. UV–vis studies assert the excitations over the visible region due to transverse and longitudinal surface plasmon modes. The gold nanoparticles exhibit excellent size dependant antifungal activity and greater biocidal action against Candida isolates for 7 nm sized gold nanoparticles restricting the transmembrane H{sup +} efflux of the Candida species than 15 nm sized gold nanoparticles.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Latty, Drew, E-mail: drew.latty@health.nsw.gov.au; Stuart, Kirsty E; Westmead Breast Cancer Institute, Sydney, New South Wales

Radiation treatment to the left breast is associated with increased cardiac morbidity and mortality. The deep inspiration breath-hold technique (DIBH) can decrease radiation dose delivered to the heart and this may facilitate the treatment of the internal mammary chain nodes. The aim of this review is to critically analyse the literature available in relation to breath-hold methods, implementation, utilisation, patient compliance, planning methods and treatment verification of the DIBH technique. Despite variation in the literature regarding the DIBH delivery method, patient coaching, visual feedback mechanisms and treatment verification, all methods of DIBH delivery reduce radiation dose to the heart. Furthermore » research is required to determine optimum protocols for patient training and treatment verification to ensure the technique is delivered successfully.« less

A synchronization method for wireless acquisition systems, application to brain computer interfaces.

PubMed

Foerster, M; Bonnet, S; van Langhenhove, A; Porcherot, J; Charvet, G

2013-01-01

A synchronization method for wireless acquisition systems has been developed and implemented on a wireless ECoG recording implant and on a wireless EEG recording helmet. The presented algorithm and hardware implementation allow the precise synchronization of several data streams from several sensor nodes for applications where timing is critical like in event-related potential (ERP) studies. The proposed method has been successfully applied to obtain visual evoked potentials and compared with a reference biosignal amplifier. The control over the exact sampling frequency allows reducing synchronization errors that will otherwise accumulate during a recording. The method is scalable to several sensor nodes communicating with a shared base station.

At-line process analytical technology (PAT) for more efficient scale up of biopharmaceutical microfiltration unit operations.

PubMed

Watson, Douglas S; Kerchner, Kristi R; Gant, Sean S; Pedersen, Joseph W; Hamburger, James B; Ortigosa, Allison D; Potgieter, Thomas I

2016-01-01

Tangential flow microfiltration (MF) is a cost-effective and robust bioprocess separation technique, but successful full scale implementation is hindered by the empirical, trial-and-error nature of scale-up. We present an integrated approach leveraging at-line process analytical technology (PAT) and mass balance based modeling to de-risk MF scale-up. Chromatography-based PAT was employed to improve the consistency of an MF step that had been a bottleneck in the process used to manufacture a therapeutic protein. A 10-min reverse phase ultra high performance liquid chromatography (RP-UPLC) assay was developed to provide at-line monitoring of protein concentration. The method was successfully validated and method performance was comparable to previously validated methods. The PAT tool revealed areas of divergence from a mass balance-based model, highlighting specific opportunities for process improvement. Adjustment of appropriate process controls led to improved operability and significantly increased yield, providing a successful example of PAT deployment in the downstream purification of a therapeutic protein. The general approach presented here should be broadly applicable to reduce risk during scale-up of filtration processes and should be suitable for feed-forward and feed-back process control. © 2015 American Institute of Chemical Engineers.

Skin grafts: a rural general surgical perspective.

PubMed

Henderson, Nigel J; Fancourt, Michael; Gilkison, William; Kyle, Stephen; Mosquera, Damien

2009-05-01

Skin grafts are a common method of closing skin defects. The literature comparing methods of graft application and subsequent outcomes is poor, but reports indicate a graft failure rate between 2 and 30%. The aim of this study was to audit our current skin graft practice. Data were collected prospectively on all skin grafts performed by the general surgical department between 1st December 2005 and 1st December 2006. A standardized proforma on each patient included data on age, gender, graft indication, application method, comorbidities, length of stay, and graft outcomes including graft take at 1, 2 and 6 weeks post-operatively. There were 85 grafts performed on 74 patients, median age 72 years (9-102 years), with 10 (12%) acute admissions. Prophylactic antibiotics were given to 50% (38 of 74) of patients. Successful grafts (>80% take) were performed in 68 (80%) patients. The overall graft complication rate was 24.7% (22 of 85 grafts). Infection occurred in 13 of 17 graft failures. No patients underwent re-operation for graft failure. Patients who received prophylactic antibiotics had a reduced risk of graft failure (Fisher's exact test, P = 0.016). Skin grafts were performed successfully in the majority of patients. Graft complication and failure rates compare well with the world literature. The use of prophylactic antibiotics was the only predictor of successful graft take.

Enhancing Electromagnetic Side-Channel Analysis in an Operational Environment

NASA Astrophysics Data System (ADS)

Montminy, David P.

Side-channel attacks exploit the unintentional emissions from cryptographic devices to determine the secret encryption key. This research identifies methods to make attacks demonstrated in an academic environment more operationally relevant. Algebraic cryptanalysis is used to reconcile redundant information extracted from side-channel attacks on the AES key schedule. A novel thresholding technique is used to select key byte guesses for a satisfiability solver resulting in a 97.5% success rate despite failing for 100% of attacks using standard methods. Two techniques are developed to compensate for differences in emissions from training and test devices dramatically improving the effectiveness of cross device template attacks. Mean and variance normalization improves same part number attack success rates from 65.1% to 100%, and increases the number of locations an attack can be performed by 226%. When normalization is combined with a novel technique to identify and filter signals in collected traces not related to the encryption operation, the number of traces required to perform a successful attack is reduced by 85.8% on average. Finally, software-defined radios are shown to be an effective low-cost method for collecting side-channel emissions in real-time, eliminating the need to modify or profile the target encryption device to gain precise timing information.

Sterility method of pest control and its potential role in an integrated sea lamprey (Petromyzon marinus) control program

USGS Publications Warehouse

Hanson, Lee H.; Manion, Patrick J.

1980-01-01

The sterility method of pest control could be an effective tool in the sea lamprey (Petromyzon marinus) control program in the Great Lakes. Some of the requirements for its successful application have been met. A field study demonstrated that the release of male sea lampreys, sterilized by the injection of 100 mg/kg of P,P-bis(1-aziridinyl)-N-methylphosphinothioic amide (bisazir), will reduce the number of viable larvae produced. The actual reduction in reproductive success that occurred was directly related to the ratio of sterile to normal males in the population. The technique can be used in many ways in an integrated control program and has considerable potential for the more effective control of the sea lamprey. Eradication is a distinct possibility.Key words: sea lamprey, Petromyzon marinus; pest control, fish control, sterile-male technique, sterilization, chemosterilants, bisazir, Great Lakes

Slow-light transmission with high group index and large normalized delay bandwidth product through successive defect rods on intrinsic photonic crystal waveguide

NASA Astrophysics Data System (ADS)

Elshahat, Sayed; Khan, Karim; Yadav, Ashish; Bibbò, Luigi; Ouyang, Zhengbiao

2018-07-01

We proposed a strategy with successive cavities as energy reservoirs of electromagnetic energy and light-speed reducers introduced in the first and second rows of rods on the walls of an intrinsic photonic crystal waveguide (PCW) for slow-light transmission in the PCW concerning applications for optical communication, optical computation and optical signal processing. Subsequently, plane-wave expansion method (PWE) is used for studying slow-light properties and finite-difference time-domain (FDTD) method to demonstrate the slow-light propagating property of our proposed structure. We obtained group index as exceedingly large as 6123 with normalized delay bandwidth product (NDBP) as high as 0.48. We designed a facile but more generalized structure that may provide a vital theoretical basis for further enhancing the storage capacity properties of slow light with wideband and high NDBP.

Varying Success of Relaying To Reduce Vibrio parahaemolyticus Levels in Oysters ( Crassostrea virginica).

PubMed

Taylor, Michael A; Yu, Jong W; Howell, Thomas L; Jones, Stephen H

2018-04-01

Vibrio parahaemolyticus is the leading cause of seafood-borne human infections in the United States, and many of these illnesses are associated with consumption of raw molluscan shellfish. V. parahaemolyticus levels in shellfish vary temporally and spatially with environmental conditions in and around production areas. The objective of this study was to study the potential for reducing levels of V. parahaemolyticus in live oysters by relaying them during higher-risk warm weather to a site with elevated salinity and consistently low V. parahaemolyticus levels. The effectiveness of relaying was assessed by analyzing oyster samples collected on days 0, 2, 7, 10, and 14 for V. parahaemolyticus levels using a three-tube most-probable-number enrichment method in conjunction with genetic marker-based quantitative PCR. The salinity at the relay site was always higher than the salinity at the harvest site, with the difference between the two sites ranging from 3.4 to 19.1 ppt (average, 12 ppt) during 2011 to 2014. Oysters relayed during June, July, and August in 2011 and 2012 showed consistently reduced V. parahaemolyticus levels after 14 days, whereas relaying was less successful and V. parahaemolyticus populations changed to include trh-positive strains during 2013. When effective, relay required at least 10 days to reduce V. parahaemolyticus levels. A sample of oysters collected in August 2012, which was temperature abused to increase initial V. parahaemolyticus levels, showed a 4.5-log decrease in V. parahaemolyticus levels after 14 days of relay. These results suggest that relaying oysters to reduce V. parahaemolyticus levels holds promise, but that both microbial community and environmental conditions at relay sites can affect relay success. Further investigation to discover key factors that affect V. parahaemolyticus levels in relayed oysters may aid in developing a consistent approach for reducing V. parahaemolyticus in oysters to eliminate the risk of illness for oyster consumers.

The evaluation of radiologic methods for access guidance in percutaneous nephrolithotomy: a systematic review of the literature.

PubMed

Breda, Alberto; Territo, Angelo; Scoffone, Cesare; Seitz, Christian; Knoll, Thomas; Herrmann, Thomas; Brehmer, Mariannhe; Osther, Palle J S; Liatsikos, Evangelos

2017-11-12

Percutaneous nephrolithotomy (PNL) is the treatment of choice for larger and complex renal calculi. First step in performing PNL is to obtain access to the renal cavity using either fluoroscopy or ultrasound (US) guidance or a combination of both. Which guiding method to choose is controversial? A systematic review of the literature was performed comparing image guidance modalities for obtaining access in PNL. Evidence acquisition and synthesis: A PubMed, Scopus and Cochrane search for peer-reviewed studies was performed using the keywords "ultrasound" AND "fluoroscopy" AND "Percutaneous nephrolithotomy". Eligible articles were reviewed according to PRISMA criteria. Two hundred and forty records were identified using the keywords. Of these twelve studies were considered relevant. US guidance seems to be associated with a slightly lower complication rate, which may be related to fewer puncture attempts needed for obtaining access and to better peri-renal organ visualization. On the other hand, US-guidance alone needs the adjunct of fluoroscopy in a significant number of cases for achieving access. Stone free rate (SFR) was comparable between groups. Using US for renal access unequivocally reduces radiation exposure. Current evidence indicates that both fluoroscopy and US guidance may be successfully used for obtaining percutaneous renal access. Combining the image-guiding modalities - US and fluoroscopy - seems to increase outcome in PNL both with regard to success in achieving access and reducing complications. Furthermore, including US in the access strategy of PNL reduces radiation exposure to surgeon and staff as well as patients.

On lossy transform compression of ECG signals with reference to deformation of their parameter values.

PubMed

Koski, Antti; Tossavainen, Timo; Juhola, Martti

2004-01-01

Electrocardiogram (ECG) signals are the most prominent biomedical signal type used in clinical medicine. Their compression is important and widely researched in the medical informatics community. In the previous literature compression efficacy has been investigated only in the context of how much known or developed methods reduced the storage required by compressed forms of original ECG signals. Sometimes statistical signal evaluations based on, for example, root mean square error were studied. In previous research we developed a refined method for signal compression and tested it jointly with several known techniques for other biomedical signals. Our method of so-called successive approximation quantization used with wavelets was one of the most successful in those tests. In this paper, we studied to what extent these lossy compression methods altered values of medical parameters (medical information) computed from signals. Since the methods are lossy, some information is lost due to the compression when a high enough compression ratio is reached. We found that ECG signals sampled at 400 Hz could be compressed to one fourth of their original storage space, but the values of their medical parameters changed less than 5% due to compression, which indicates reliable results.

Vibration of carbon nanotubes with defects: order reduction methods

NASA Astrophysics Data System (ADS)

Hudson, Robert B.; Sinha, Alok

2018-03-01

Order reduction methods are widely used to reduce computational effort when calculating the impact of defects on the vibrational properties of nearly periodic structures in engineering applications, such as a gas-turbine bladed disc. However, despite obvious similarities these techniques have not yet been adapted for use in analysing atomic structures with inevitable defects. Two order reduction techniques, modal domain analysis and modified modal domain analysis, are successfully used in this paper to examine the changes in vibrational frequencies, mode shapes and mode localization caused by defects in carbon nanotubes. The defects considered are isotope defects and Stone-Wales defects, though the methods described can be extended to other defects.

Application of the Finite Element Method in Atomic and Molecular Physics

NASA Technical Reports Server (NTRS)

Shertzer, Janine

2007-01-01

The finite element method (FEM) is a numerical algorithm for solving second order differential equations. It has been successfully used to solve many problems in atomic and molecular physics, including bound state and scattering calculations. To illustrate the diversity of the method, we present here details of two applications. First, we calculate the non-adiabatic dipole polarizability of Hi by directly solving the first and second order equations of perturbation theory with FEM. In the second application, we calculate the scattering amplitude for e-H scattering (without partial wave analysis) by reducing the Schrodinger equation to set of integro-differential equations, which are then solved with FEM.

Management of Sodium-reduced Meals at Worksite Cafeterias: Perceptions, Practices, Barriers, and Needs among Food Service Personnel

PubMed Central

Lee, Jounghee; Park, Sohyun

2015-01-01

Objectives The sodium content of meals provided at worksite cafeterias is greater than the sodium content of restaurant meals and home meals. The objective of this study was to assess the relationships between sodium-reduction practices, barriers, and perceptions among food service personnel. Methods We implemented a cross-sectional study by collecting data on perceptions, practices, barriers, and needs regarding sodium-reduced meals at 17 worksite cafeterias in South Korea. We implemented Chi-square tests and analysis of variance for statistical analysis. For post hoc testing, we used Bonferroni tests; when variances were unequal, we used Dunnett T3 tests. Results This study involved 104 individuals employed at the worksite cafeterias, comprised of 35 men and 69 women. Most of the participants had relatively high levels of perception regarding the importance of sodium reduction (very important, 51.0%; moderately important, 27.9%). Sodium reduction practices were higher, but perceived barriers appeared to be lower in participants with high-level perception of sodium-reduced meal provision. The results of the needs assessment revealed that the participants wanted to have more active education programs targeting the general population. The biggest barriers to providing sodium-reduced meals were use of processed foods and limited methods of sodium-reduced cooking in worksite cafeterias. Conclusion To make the provision of sodium-reduced meals at worksite cafeterias more successful and sustainable, we suggest implementing more active education programs targeting the general population, developing sodium-reduced cooking methods, and developing sodium-reduced processed foods. PMID:27169011

Norwegian honey bees surviving Varroa destructor mite infestations by means of natural selection

PubMed Central

Dahle, Bjørn; Neumann, Peter

2017-01-01

Background Managed, feral and wild populations of European honey bee subspecies, Apis mellifera, are currently facing severe colony losses globally. There is consensus that the ectoparasitic mite Varroa destructor, that switched hosts from the Eastern honey bee Apis cerana to the Western honey bee A. mellifera, is a key factor driving these losses. For >20 years, breeding efforts have not produced European honey bee colonies that can survive infestations without the need for mite control. However, at least three populations of European honey bees have developed this ability by means of natural selection and have been surviving for >10 years without mite treatments. Reduced mite reproductive success has been suggested as a key factor explaining this natural survival. Here, we report a managed A. mellifera population in Norway, that has been naturally surviving consistent V. destructor infestations for >17 years. Methods Surviving colonies and local susceptible controls were evaluated for mite infestation levels, mite reproductive success and two potential mechanisms explaining colony survival: grooming of adult worker bees and Varroa Sensitive Hygiene (VSH): adult workers specifically detecting and removing mite-infested brood. Results Mite infestation levels were significantly lower in surviving colonies and mite reproductive success was reduced by 30% when compared to the controls. No significant differences were found between surviving and control colonies for either grooming or VSH. Discussion Our data confirm that reduced mite reproductive success seems to be a key factor for natural survival of infested A. mellifera colonies. However, neither grooming nor VSH seem to explain colony survival. Instead, other behaviors of the adult bees seem to be sufficient to hinder mite reproductive success, because brood for this experiment was taken from susceptible donor colonies only. To mitigate the global impact of V. destructor, we suggest learning more from nature, i.e., identifying the obviously efficient mechanisms favored by natural selection. PMID:29085753

An interprojection sensor fusion approach to estimate blocked projection signal in synchronized moving grid-based CBCT system.

PubMed

Zhang, Hong; Ren, Lei; Kong, Vic; Giles, William; Zhang, You; Jin, Jian-Yue

2016-01-01

A preobject grid can reduce and correct scatter in cone beam computed tomography (CBCT). However, half of the signal in each projection is blocked by the grid. A synchronized moving grid (SMOG) has been proposed to acquire two complimentary projections at each gantry position and merge them into one complete projection. That approach, however, suffers from increased scanning time and the technical difficulty of accurately merging the two projections per gantry angle. Herein, the authors present a new SMOG approach which acquires a single projection per gantry angle, with complimentary grid patterns for any two adjacent projections, and use an interprojection sensor fusion (IPSF) technique to estimate the blocked signal in each projection. The method may have the additional benefit of reduced imaging dose due to the grid blocking half of the incident radiation. The IPSF considers multiple paired observations from two adjacent gantry angles as approximations of the blocked signal and uses a weighted least square regression of these observations to finally determine the blocked signal. The method was first tested with a simulated SMOG on a head phantom. The signal to noise ratio (SNR), which represents the difference of the recovered CBCT image to the original image without the SMOG, was used to evaluate the ability of the IPSF in recovering the missing signal. The IPSF approach was then tested using a Catphan phantom on a prototype SMOG assembly installed in a bench top CBCT system. In the simulated SMOG experiment, the SNRs were increased from 15.1 and 12.7 dB to 35.6 and 28.9 dB comparing with a conventional interpolation method (inpainting method) for a projection and the reconstructed 3D image, respectively, suggesting that IPSF successfully recovered most of blocked signal. In the prototype SMOG experiment, the authors have successfully reconstructed a CBCT image using the IPSF-SMOG approach. The detailed geometric features in the Catphan phantom were mostly recovered according to visual evaluation. The scatter related artifacts, such as cupping artifacts, were almost completely removed. The IPSF-SMOG is promising in reducing scatter artifacts and improving image quality while reducing radiation dose.

Enhanced GPS-based GRACE baseline determination by using a new strategy for ambiguity resolution and relative phase center variation corrections

NASA Astrophysics Data System (ADS)

Gu, Defeng; Ju, Bing; Liu, Junhong; Tu, Jia

2017-09-01

Precise relative position determination is a prerequisite for radar interferometry by formation flying satellites. It has been shown that this can be achieved by high-quality, dual-frequency GPS receivers that provide precise carrier-phase observations. The precise baseline determination between satellites flying in formation can significantly improve the accuracy of interferometric products, and has become a research interest. The key technologies of baseline determination using spaceborne dual-frequency GPS for gravity recovery and climate experiment (GRACE) formation are presented, including zero-difference (ZD) reduced dynamic orbit determination, double-difference (DD) reduced dynamic relative orbit determination, integer ambiguity resolution and relative receiver antenna phase center variation (PCV) estimation. We propose an independent baseline determination method based on a new strategy of integer ambiguity resolution and correction of relative receiver antenna PCVs, and implement the method in the NUDTTK software package. The algorithms have been tested using flight data over a period of 120 days from GRACE. With the original strategy of integer ambiguity resolution based on Melbourne-Wübbena (M-W) combinations, the average success rate is 85.6%, and the baseline precision is 1.13 mm. With the new strategy of integer ambiguity resolution based on a priori relative orbit, the average success rate and baseline precision are improved by 5.8% and 0.11 mm respectively. A relative ionosphere-free phase pattern estimation result is given in this study, and with correction of relative receiver antenna PCVs, the baseline precision is further significantly improved by 0.34 mm. For ZD reduced dynamic orbit determination, the orbit precision for each GRACE satellite A or B in three dimensions (3D) is about 2.5 cm compared to Jet Propulsion Laboratory (JPL) post science orbits. For DD reduced dynamic relative orbit determination, the final baseline precision for two GRACE satellites formation is 0.68 mm validated by K-Band Ranging (KBR) observations, and average ambiguity success rate of about 91.4% could be achieved.

Reducing hospital readmission rates: current strategies and future directions.

PubMed

Kripalani, Sunil; Theobald, Cecelia N; Anctil, Beth; Vasilevskis, Eduard E

2014-01-01

New financial penalties for institutions with high readmission rates have intensified efforts to reduce rehospitalization. Several interventions that involve multiple components (e.g., patient needs assessment, medication reconciliation, patient education, arranging timely outpatient appointments, and providing telephone follow-up) have successfully reduced readmission rates for patients discharged to home. The effect of interventions on readmission rates is related to the number of components implemented; single-component interventions are unlikely to reduce readmissions significantly. For patients discharged to postacute care facilities, multicomponent interventions have reduced readmissions through enhanced communication, medication safety, advanced care planning, and enhanced training to manage medical conditions that commonly precipitate readmission. To help hospitals direct resources and services to patients with greater likelihood of readmission, risk-stratification methods are available. Future work should better define the roles of home-based services, information technology, mental health care, caregiver support, community partnerships, and new transitional care personnel.

Vitrification-based cryopreservation of Drosophila embryos

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schreuders, P.D.; Mazur, P.

1994-12-31

Currently, over 30,000 strains of Drosophila melanogaster are maintained by geneticists through regular transfer of breeding stocks. A more cost effective solution is to cryopreserve their embryos. Cooling and warming rates >10,000{degrees}C/min. are required to prevent chilling injury. To avoid the lethal intracellular ice normally produced at such high cooling rates, it is necessary to use {ge}50% (w/w) concentrations of glass-inducing solutes to vitrify the embryos. Differential scanning calorimetry (DSC) is used to develop and evaluate ethylene glycol and polyvinyl pyrrolidone based vitrification solutions. The resulting solution consists of 8.5M ethylene glycol + 10% polyvinylpyrrolidone in D-20 Drosophila culture medium.more » A two stage method is used for the introduction and concentration of these solutes within the embryo. The method reduces the exposure time to the solution and, consequently, reduces toxicity. Both DSC and freezing experiments suggest that, while twelve-hour embryos will vitrify using cooling rates >200{degrees}C/min., they will devitrify and be killed with even moderately rapid warming rates of {approximately}1,900{degrees}C/min. Very rapid warming ({approximately}100,000{degrees}C/min.) results in variable numbers of successfully cryopreserved embryos. This sensitivity to warming rite is typical of devitrification. The variability in survival is reduced using embryos of a precisely determined embryonic stage. The vitrification of the older, fifteen-hour, embryos yields an optimized hatching rate of 68%, with 35 - 40% of the resulting larvae developing to normal adults. This Success rite in embryos of this age may reflect a reduced sensitivity to limited devitrification or a more even distribution of the ethylene glycol within the embryo.« less

Let native species take their course: Ambrosia artemisiifolia replacement during natural or ;artificial; succession

NASA Astrophysics Data System (ADS)

Gentili, Rodolfo; Montagnani, Chiara; Gilardelli, Federica; Guarino, Maria Francesca; Citterio, Sandra

2017-07-01

Ambrosia artemisiifolia is able to dominate the early stages of vegetation succession in open/disturbed habitats, spreading out into available empty niches, after which it can be progressively replaced by perennial plants. In this study, we considered the time-span in which the species is suppressed during active (restoration actions) and passive (spontaneous) vegetation recovery. In particular, we envisaged that A. artemisiifolia growth and fitness may be strongly reduced and that the species may rapidly be suppressed within a short time during succession as a consequence of the increase of vegetation cover, both natural or artificially induced, in a disturbed area of northern Italy. Three different treatments were applied within an abandoned quarry area commonly invaded by A. artemisiifolia: (i) spontaneous succession i.e. (control), (ii) hayseed and (iii) a commercial seed mixture. We determined the effect of mixtures of grassland species, established from native hayseed or from a commercial seed mixture, on A. artemisiifolia growth and fitness traits over time in comparison to a non-seeded area left to spontaneous succession. The results demonstrated that, after the first growing season, compared with spontaneous succession, both commercial seed and hayseed resulted in a strong reduction of A. artemisiifolia abundance and growth rate, in terms of both vegetative and reproductive traits. After the second growing season, A. artemisiifolia was completely suppressed in the commercial seed treatment, and after the third growing season it was also suppressed in the spontaneous succession and hayseed treatments. This study indicated that both active and passive vegetation recovery (by niche filling and competitive exclusion) could be used as methods individually or in combination with other methods, such as mowing and biological control, to suppress A. artemisiifolia from anthropogenic habitats.

Predictors of Success for Electronic Health Record Implementation in Small Physician Practices

PubMed Central

Ancker, J.S.; Singh, M.P.; Thomas, R.; Edwards, A.; Snyder, A.; Kashyap, A.; Kaushal, R.

2013-01-01

Background The federal government is promoting adoption of electronic health records (EHRs) through financial incentives for EHR use and implementation support provided by regional extension centers. Small practices have been slow to adopt EHRs. Objectives Our objective was to measure time to EHR implementation and identify factors associated with successful implementation in small practices receiving financial incentives and implementation support. This study is unique in exploiting quantitative implementation time data collected prospectively as part of routine project management. Methods This mixed-methods study includes interviews of key informants and a cohort study of 544 practices that had worked with the Primary Care Information Project (PCIP), a publicly funded organization that since 2007 has subsidized EHRs and provided implementation support similar to that supplied by the new regional extension centers. Data from a project management database were used for a cohort study to assess time to implementation and predictors of implementation success. Results Four hundred and thirty practices (79%) implemented EHRs within the analysis period, with a median project time of 24.7 weeks (95% CI: 23.3 – 26.4). Factors associated with implementation success were: fewer providers, practice sites, and patients; fewer Medicaid and uninsured patients; having previous experience with scheduling software; enrolling in 2010 rather than earlier; and selecting an integrated EHR plus practice management product rather than two products. Interviews identified positive attitude toward EHRs, resources, and centralized leadership as additional practice-level predictors of success. Conclusions A local initiative similar to current federal programs successfully implemented EHRs in primary care practices by offsetting software costs and providing implementation assistance. Nevertheless, implementation success was affected by practice size and other characteristics, suggesting that the federal programs can reduce barriers to EHR implementation but may not eliminate them. PMID:23650484

Has the DOTS Strategy Improved Case Finding or Treatment Success? An Empirical Assessment

PubMed Central

Obermeyer, Ziad; Abbott-Klafter, Jesse; Murray, Christopher J. L.

2008-01-01

Background Nearly fifteen years after the start of WHO's DOTS strategy, tuberculosis remains a major global health problem. Given the lack of empirical evidence that DOTS reduces tuberculosis burden, considerable debate has arisen about its place in the future of global tuberculosis control efforts. An independent evaluation of DOTS, one of the most widely-implemented and longest-running interventions in global health, is a prerequisite for meaningful improvements to tuberculosis control efforts, including WHO's new Stop TB Strategy. We investigate the impact of the expansion of the DOTS strategy on tuberculosis case finding and treatment success, using only empirical data. Methods and Findings We study the effect of DOTS using time-series cross-sectional methods. We first estimate the impact of DOTS expansion on case detection, using reported case notification data and controlling for other determinants of change in notifications, including HIV prevalence, GDP, and country-specific effects. We then estimate the effect of DOTS expansion on treatment success. DOTS programme variables had no statistically significant impact on case detection in a wide range of models and specifications. DOTS population coverage had a significant effect on overall treatment success rates, such that countries with full DOTS coverage benefit from at least an 18% increase in treatment success (95% CI: 5–31%). Conclusions The DOTS technical package improved overall treatment success. By contrast, DOTS expansion had no effect on case detection. This finding is less optimistic than previous analyses. Better epidemiological and programme data would facilitate future monitoring and evaluation efforts. PMID:18320042

Forecasting of particulate matter time series using wavelet analysis and wavelet-ARMA/ARIMA model in Taiyuan, China.

PubMed

Zhang, Hong; Zhang, Sheng; Wang, Ping; Qin, Yuzhe; Wang, Huifeng

2017-07-01

Particulate matter with aerodynamic diameter below 10 μm (PM 10 ) forecasting is difficult because of the uncertainties in describing the emission and meteorological fields. This paper proposed a wavelet-ARMA/ARIMA model to forecast the short-term series of the PM 10 concentrations. It was evaluated by experiments using a 10-year data set of daily PM 10 concentrations from 4 stations located in Taiyuan, China. The results indicated the following: (1) PM 10 concentrations of Taiyuan had a decreasing trend during 2005 to 2012 but increased in 2013. PM 10 concentrations had an obvious seasonal fluctuation related to coal-fired heating in winter and early spring. (2) Spatial differences among the four stations showed that the PM 10 concentrations in industrial and heavily trafficked areas were higher than those in residential and suburb areas. (3) Wavelet analysis revealed that the trend variation and the changes of the PM 10 concentration of Taiyuan were complicated. (4) The proposed wavelet-ARIMA model could be efficiently and successfully applied to the PM 10 forecasting field. Compared with the traditional ARMA/ARIMA methods, this wavelet-ARMA/ARIMA method could effectively reduce the forecasting error, improve the prediction accuracy, and realize multiple-time-scale prediction. Wavelet analysis can filter noisy signals and identify the variation trend and the fluctuation of the PM 10 time-series data. Wavelet decomposition and reconstruction reduce the nonstationarity of the PM 10 time-series data, and thus improve the accuracy of the prediction. This paper proposed a wavelet-ARMA/ARIMA model to forecast the PM 10 time series. Compared with the traditional ARMA/ARIMA method, this wavelet-ARMA/ARIMA method could effectively reduce the forecasting error, improve the prediction accuracy, and realize multiple-time-scale prediction. The proposed model could be efficiently and successfully applied to the PM 10 forecasting field.

A contemporary approach to the prevention of peritoneal dialysis-related peritonitis in children: the role of improvement science.

PubMed

Redpath Mahon, Allison; Neu, Alicia M

2017-08-01

Peritonitis is a leading cause of hospitalizations, morbidity, and modality change in pediatric chronic peritoneal dialysis (CPD) patients. Despite guidelines published by the International Society for Peritoneal Dialysis aimed at reducing the risk of peritonitis, registry data have revealed significant variability in peritonitis rates among centers caring for children on CPD, which suggests variability in practice. Improvement science methods have been used to reduce a variety of healthcare-associated infections and are also being applied successfully to decrease rates of peritonitis in children. A successful quality improvement program with the goal of decreasing peritonitis will not only include primary drivers directly linked to the outcome of peritonitis, but will also direct attention to secondary drivers that are important for the achievement of primary drivers, such as health literacy and patient and family engagement strategies. In this review, we describe a comprehensive improvement science model for the reduction of peritonitis in pediatric patients on CPD.

Stabilization by multipoint covalent attachment of a biocatalyst with polygalacturonase activity used for juice clarification.

PubMed

Ramírez Tapias, Yuly A; Rivero, Cintia W; Gallego, Fernando López; Guisán, José M; Trelles, Jorge A

2016-10-01

Derivatized-agarose supports are suitable for enzyme immobilization by different methods, taking advantage of different physical, chemical and biological conditions of the protein and the support. In this study, agarose particles were modified with MANAE, PEI and glyoxyl groups and evaluated to stabilize polygalacturonase from Streptomyces halstedii ATCC 10897. A new immobilized biocatalyst was developed using glyoxyl-agarose as support; it exhibited high performance in degrading polygalacturonic acid and releasing oligogalacturonides. Maximal enzyme activity was detected at 5h of reaction using 0.05g/mL of immobilized biocatalyst, which released 3mg/mL of reducing sugars and allowed the highest product yield conversion and increased stability. These results are very favorable for pectin degradation with reusability up to 18 successive reactions (90h) and application in juice clarification. Plum (4.7°Bx) and grape (10.6°Bx) juices were successfully clarified, increasing reducing sugars content and markedly decreasing turbidity and viscosity. Copyright © 2016 Elsevier Ltd. All rights reserved.

Laparoscopic inguinal hernia repair by the hook method in emergency setting in children presenting with incarcerated inguinal hernia.

PubMed

Chan, Kin Wai Edwin; Lee, Kim Hung; Tam, Yuk Him; Sihoe, Jennifer Dart Yin; Cheung, Sing Tak; Mou, Jennifer Wai Cheung

2011-10-01

The development of laparoscopic hernia repair has provided an alternative approach to the management of incarcerated inguinal hernia in children. Different laparoscopic techniques for hernia repair have been described. However, we hereby review the role of laparoscopic hernia repair using the hook method in the emergency setting for incarcerated inguinal hernias in children. A retrospective review was conducted of all children who presented with incarcerated inguinal hernia and underwent laparoscopic hernia repair using the hook method in emergency setting between 2004 and 2010. There were a total of 15 boys and 1 girl with a mean age of 30 ± 36 months (range, 4 months to 12 years). The hernia was successfully reduced after sedation in 7 children and after general anesthesia in 4 children. In 5 children, the hernia was reduced by a combined manual and laparoscopic-assisted approach. Emergency laparoscopic inguinal hernia repair using the hook method was performed after reduction of the hernia. The presence of preperitoneal fluid secondary to recent incarceration facilitated the dissection of the preperitoneal space by the hernia hook. All children underwent successful reduction and hernia repair. The median operative time was 37 minutes. There was no postoperative complication. The median hospital stay was 3 days. At a median follow-up of 40 months, there was no recurrence of the hernia or testicular atrophy. Emergency laparoscopic inguinal hernia repair by the hook method is safe and feasible. Easier preperitoneal dissection was experienced, and repair of the contralateral patent processus vaginalis can be performed in the same setting. Copyright © 2011 Elsevier Inc. All rights reserved.

POD/DEIM reduced-order strategies for efficient four dimensional variational data assimilation

NASA Astrophysics Data System (ADS)

Ştefănescu, R.; Sandu, A.; Navon, I. M.

2015-08-01

This work studies reduced order modeling (ROM) approaches to speed up the solution of variational data assimilation problems with large scale nonlinear dynamical models. It is shown that a key requirement for a successful reduced order solution is that reduced order Karush-Kuhn-Tucker conditions accurately represent their full order counterparts. In particular, accurate reduced order approximations are needed for the forward and adjoint dynamical models, as well as for the reduced gradient. New strategies to construct reduced order based are developed for proper orthogonal decomposition (POD) ROM data assimilation using both Galerkin and Petrov-Galerkin projections. For the first time POD, tensorial POD, and discrete empirical interpolation method (DEIM) are employed to develop reduced data assimilation systems for a geophysical flow model, namely, the two dimensional shallow water equations. Numerical experiments confirm the theoretical framework for Galerkin projection. In the case of Petrov-Galerkin projection, stabilization strategies must be considered for the reduced order models. The new reduced order shallow water data assimilation system provides analyses similar to those produced by the full resolution data assimilation system in one tenth of the computational time.

Succession Planning and the Imposter Phenomenon in Higher Education

ERIC Educational Resources Information Center

Parkman, Anna; Beard, Roxanne

2008-01-01

This article illustrates the impact of the imposter phenomenon on succession planning in higher education, describes imposter behavior in detail and offers a number of strategies to address these behaviors. The authors examine how to reduce the likelihood that an imposter is placed into the succession pipeline and how to reduce imposter behaviors…

Reducing the cesarean delivery rates for breech presentations: administration of spinal anesthesia facilitates manipulation to cephalic presentation, but is it cost saving?

PubMed Central

2014-01-01

Background External cephalic version (ECV) is infrequently performed and 98% of breech presenting fetuses are delivered surgically. Neuraxial analgesia can increase the success rate of ECV significantly, potentially reducing cesarean delivery rates for breech presentation. The current study aims to determine whether the additional cost to the hospital of spinal anesthesia for ECV is offset by cost savings generated by reduced cesarean delivery. Methods In our tertiary hospital, three variables manpower, disposables, and fixed costs were calculated for ECV, ECV plus anesthetic doses of spinal block, vaginal delivery and cesarean delivery. Total procedure costs were compared for possible delivery pathways. Manpower data were obtained from management payroll, fixed costs by calculating cost/lifetime usage rate and disposables were micro-costed in 2008, expressed in 2013 NIS. Results Cesarean delivery is the most expensive option, 11670.54 NIS and vaginal delivery following successful ECV under spinal block costs 5497.2 NIS. ECV alone costs 960.21 NIS, ECV plus spinal anesthesia costs 1386.97 NIS. The highest individual cost items for vaginal, cesarean delivery and ECV were for manpower. Expensive fixed costs for cesarean delivery included operating room trays and postnatal hospitalization (minimum 3 days). ECV with spinal block is cheaper due to lower expected cesarean delivery rate and its lower associated costs. Conclusions The additional cost of the spinal anesthesia is offset by increased success rates for the ECV procedure resulting in reduction in the cesarean delivery rate. PMID:24564984

Zero-fringe demodulation method based on location-dependent birefringence dispersion in polarized low-coherence interferometry.

PubMed

Wang, Shuang; Liu, Tiegen; Jiang, Junfeng; Liu, Kun; Yin, Jinde; Qin, Zunqi; Zou, Shengliang

2014-04-01

We present a high precision and fast speed demodulation method for a polarized low-coherence interferometer with location-dependent birefringence dispersion. Based on the characteristics of location-dependent birefringence dispersion and five-step phase-shifting technology, the method accurately retrieves the peak position of zero-fringe at the central wavelength, which avoids the fringe order ambiguity. The method processes data only in the spatial domain and reduces the computational load greatly. We successfully demonstrated the effectiveness of the proposed method in an optical fiber Fabry-Perot barometric pressure sensing experiment system. Measurement precision of 0.091 kPa was realized in the pressure range of 160 kPa, and computation time was improved by 10 times compared to the traditional phase-based method that requires Fourier transform operation.

Reducing the complexity of NASA's space communications infrastructure

NASA Technical Reports Server (NTRS)

Miller, Raymond E.; Liu, Hong; Song, Junehwa

1995-01-01

This report describes the range of activities performed during the annual reporting period in support of the NASA Code O Success Team - Lifecycle Effectiveness for Strategic Success (COST LESS) team. The overall goal of the COST LESS team is to redefine success in a constrained fiscal environment and reduce the cost of success for end-to-end mission operations. This goal is more encompassing than the original proposal made to NASA for reducing complexity of NASA's Space Communications Infrastructure. The COST LESS team approach for reengineering the space operations infrastructure has a focus on reversing the trend of engineering special solutions to similar problems.

Modeling Natural Space Ionizing Radiation Effects on External Materials

NASA Technical Reports Server (NTRS)

Alstatt, Richard L.; Edwards, David L.; Parker, Nelson C. (Technical Monitor)

2000-01-01

Predicting the effective life of materials for space applications has become increasingly critical with the drive to reduce mission cost. Programs have considered many solutions to reduce launch costs including novel, low mass materials and thin thermal blankets to reduce spacecraft mass. Determining the long-term survivability of these materials before launch is critical for mission success. This presentation will describe an analysis performed on the outer layer of the passive thermal control blanket of the Hubble Space Telescope. This layer had degraded for unknown reasons during the mission, however ionizing radiation (IR) induced embrittlement was suspected. A methodology was developed which allowed direct comparison between the energy deposition of the natural environment and that of the laboratory generated environment. Commercial codes were used to predict the natural space IR environment model energy deposition in the material from both natural and laboratory IR sources, and design the most efficient test. Results were optimized for total and local energy deposition with an iterative spreadsheet. This method has been used successfully for several laboratory tests at the Marshall Space Flight Center. The study showed that the natural space IR environment, by itself, did not cause the premature degradation observed in the thermal blanket.

Temporary subclavian steal to reduce intraprocedural embolic risk during detachable balloon occlusion of vertebrobasilar aneurysms: technical note with two case reports.

PubMed

Eckard, D A; O'Boynick, P L; Han, P P

1996-11-01

Unintentional intracerebral embolization is a serious, ever present threat during neurointerventional procedures. We have devised a method to reduce this intraprocedural risk in vertebral artery interventions by creating a temporary subclavian steal. For this technique, a temporary balloon occlusion catheter is advanced into the proximal subclavian artery via a femoral artery approach, while a second introducer catheter is passed into the target vertebral artery via an axillary artery access. The temporary occluding balloon is then inflated within the proximal subclavian artery, establishing a subclavian steal that diverts blood flow into the arm. Permanent balloon occlusion of the vertebral artery can then be accomplished without fear of intracerebral embolization. Two patients with vertebrobasilar junction aneurysms were successfully treated with detachable balloon embolization using this cerebral protection technique. The permanent occlusion balloons were easily passed through the introducer catheter without difficulty despite reversed vertebral artery flow. No complications were encountered, and the aneurysms were successfully occluded in both patients. Temporary subclavian steal can be easily created to reduce the risk of cerebral embolic complications when performing interventional neuroradiological procedures in the vertebral artery.

Modeling natural space ionizing radiation effects on external materials

NASA Astrophysics Data System (ADS)

Altstatt, Richard L.; Edwards, David L.

2000-10-01

Predicting the effective life of materials for space applications has become increasingly critical with the drive to reduce mission cost. Programs have considered many solutions to reduce launch costs including novel, low mass materials and thin thermal blankets to reduce spacecraft mass. Determining the long-term survivability of these materials before launch is critical for mission success. This presentation will describe an analysis performed on the outer layer of the passive thermal control blanket of the Hubble Space Telescope. This layer had degraded for unknown reasons during the mission, however ionizing radiation (IR) induced embrittlement was suspected. A methodology was developed which allowed direct comparison between the energy deposition of the natural environment and that of the laboratory generated environment. Commercial codes were used to predict the natural space IR environment, model energy deposition in the material from both natural and laboratory IR sources, and design the most efficient test. Results were optimized for total and local energy deposition with an iterative spreadsheet. This method has been used successfully for several laboratory tests at the Marshall Space Flight Center. The study showed that the natural space IR environment, by itself, did not cause the premature degradation observed in the thermal blanket.

Crossing Methods and Cultivation Conditions for Rapid Production of Segregating Populations in Three Grain Amaranth Species.

PubMed

Stetter, Markus G; Zeitler, Leo; Steinhaus, Adrian; Kroener, Karoline; Biljecki, Michelle; Schmid, Karl J

2016-01-01

Grain amaranths (Amaranthus spp.) have been cultivated for thousands of years in Central and South America. Their grains are of high nutritional value, but the low yield needs to be increased by selection of superior genotypes from genetically diverse breeding populations. Amaranths are adapted to harsh conditions and can be cultivated on marginal lands although little is known about their physiology. The development of controlled growing conditions and efficient crossing methods is important for research on and improvement of this ancient crop. Grain amaranth was domesticated in the Americas and is highly self-fertilizing with a large inflorescence consisting of thousands of very small flowers. We evaluated three different crossing methods (open pollination, hot water emasculation and hand emasculation) for their efficiency in amaranth and validated them with genetic markers. We identified cultivation conditions that allow an easy control of flowering time by day length manipulation and achieved flowering times of 4 weeks and generation times of 2 months. All three different crossing methods successfully produced hybrid F1 offspring, but with different success rates. Open pollination had the lowest (10%) and hand emasculation the highest success rate (74%). Hot water emasculation showed an intermediate success rate (26%) with a maximum of 94% success. It is simple to perform and suitable for a more large-scale production of hybrids. We further evaluated 11 single nucleotide polymorphism (SNP) markers and found that they were sufficient to validate all crosses of the genotypes used in this study for intra- and interspecific hybridizations. Despite its very small flowers, crosses in amaranth can be carried out efficiently and evaluated with inexpensive SNP markers. Suitable growth conditions strongly reduce the generation time and allow the control of plant height, flowering time, and seed production. In combination, this enables the rapid production of segregating populations which makes amaranth an attractive model for basic plant research but also facilitates further the improvement of this ancient crop by plant breeding.

Removal of creosote from wood particles at different horizontal and vertical locations of decommissioned poles using steam treatment

Treesearch

Todd F. Shupe; Chung Y. Hse; Han Roliadi

2006-01-01

This study used steam treatment to evaluate the potential of this method to remove residual creosote content of sawdust from weathered, out-of-service poles. Steaming was successful in reducing the creosote content to a level of 1.31%, regardless of creosote content at the start of the steaming treatment. Poles with higher initial creosote contents required longer...

Wear Debris Analysis of Grease Lubricated Ball Bearings.

DTIC Science & Technology

1982-04-12

Ferrography method was performed by the Naval Air Engineering Center (NAVAIRENGCEN), Lakehurst, New Jersey. A total of three sets of two 6309 deep-groove ball... Ferrography technique. The analysis of the grease-retained wear debris necessitated the development of a technique to reduce the grease samples to a...condition where they were compatible with the Ferrography technique. A major achievement was the successful application of dissolving the grease

Teachers', Administrators', and Students' Perception of Recess at Public Elementary Schools: A Mixed Method Study Using Online Surveys, Interview Questions, and Students' Essays with Drawings

ERIC Educational Resources Information Center

Beni, Krisztina

2013-01-01

Recess contributes to enhanced academic performance as well as social, emotional and physical development of the child. All of these are important parts of a successful education. Yet, time on recess is being reduced due to increased focus on academic performance on standardized tests. This study examined administrators', teachers' and students'…

Optimization of Diode Laser System to Treat Benign Prostate Hyperplasia Final Report CRADA No. TSB-1154-95

DOE Office of Scientific and Technical Information (OSTI.GOV)

London, Richard A; Byrne, Mark

Benign prostate hyperplasia (BPH) is a pervasive condition of enlargement of the male prostate gland which leads to several urinary difficulties ranging from hesitancy to incontinence to kidney dysfunction in severe cases. Currently the most common therapy is transurethral resection of the prostate (TURP) utilizing an electrosurgical device. Although TURP is largely successful, new BPH therapy methods are desired to reduce the cost and recovery time, improve the success rate, and reduce side effects. Recently, lasers have been introduced for this purpose. Indigo Medical Inc. is currently engaged in the development, testing, and preparation for sales of a new diodemore » laser based BPH therapy system. The development is based on laboratory experiments, animal studies, and a limited FDA-approved clinical trial in the US and in other countries. The addition of sophisticated numerical modeling, of the sort that has been highly developed at Lawrence Livermore National Laboratory, can greatly aid in the design of the system and treatment protocol. The benefits to DOE include the maintenance and advancement of numerical modeling expertise in radiation-matter interactions of the sort essential for the stockpile stewardship, inertial confinement fusion, and advanced manufacturing, and the push on advanced scientific computational methods, ultimately in areas such as 3-D transport.« less

Lower extremity kinematics that correlate with success in lateral load transfers over a low friction surface.

PubMed

Catena, Robert D; Xu, Xu

2015-01-01

We previously studied balance during lateral load transfers, but were left without explanation of why some individuals were successful in novel low friction conditions and others were not. Here, we retrospectively examined lower extremity kinematics between successful (SL) and unsuccessful (UL) groups to determine what characteristics may improve low friction performance. Success versus failure over a novel slippery surface was used to dichotomise 35 healthy working-age individuals into the two groups (SL and UL). Participants performed lateral load transfers over three sequential surface conditions: high friction, novel low friction, and practiced low friction. The UL group used a wide stance with rotation mostly at the hips during the high and novel low friction conditions. To successfully complete the practiced low friction task, they narrowed their stance and pivoted both feet and torso towards the direction of the load, similar to the SL group in all conditions. This successful kinematic method potentially results in reduced muscle demand throughout the task. Practitioner Summary: The reason for this paper is to retrospectively examine the different load transfer strategies that are used in a low friction lateral load transfer. We found stance width to be the major source of success, while sagittal plane motion was altered to potentially maintain balance.

Ultrahigh strength single crystalline nanowhiskers grown by physical vapor deposition.

PubMed

Richter, Gunther; Hillerich, Karla; Gianola, Daniel S; Mönig, Reiner; Kraft, Oliver; Volkert, Cynthia A

2009-08-01

The strength of metal crystals is reduced below the theoretical value by the presence of dislocations or by flaws that allow easy nucleation of dislocations. A straightforward method to minimize the number of defects and flaws and to presumably increase its strength is to increase the crystal quality or to reduce the crystal size. Here, we describe the successful fabrication of high aspect ratio nanowhiskers from a variety of face-centered cubic metals using a high temperature molecular beam epitaxy method. The presence of atomically smooth, faceted surfaces and absence of dislocations is confirmed using transmission electron microscopy investigations. Tensile tests performed in situ in a focused-ion beam scanning electron microscope on Cu nanowhiskers reveal strengths close to the theoretical upper limit and confirm that the properties of nanomaterials can be engineered by controlling defect and flaw densities.

Calculation of the Full Scattering Amplitude without Partial Wave Decomposition II

NASA Technical Reports Server (NTRS)

Shertzer, J.; Temkin, A.

2003-01-01

As is well known, the full scattering amplitude can be expressed as an integral involving the complete scattering wave function. We have shown that the integral can be simplified and used in a practical way. Initial application to electron-hydrogen scattering without exchange was highly successful. The Schrodinger equation (SE) can be reduced to a 2d partial differential equation (pde), and was solved using the finite element method. We have now included exchange by solving the resultant SE, in the static exchange approximation. The resultant equation can be reduced to a pair of coupled pde's, to which the finite element method can still be applied. The resultant scattering amplitudes, both singlet and triplet, as a function of angle can be calculated for various energies. The results are in excellent agreement with converged partial wave results.

A Novel Method of Coating Orthodontic Archwires with Nanoparticles

PubMed Central

Syed, Shibli S; Kulkarni, Dinraj; Todkar, Rohit; Bagul, Ravikiran S; Parekh, Kreena; Bhujbal, Nikita

2015-01-01

Background: The major hazard to the orthodontic tooth movement is the friction developing at the bracket wire interface. In the past, there have been various attempts to reduce this friction. We believe that coating the commercially available orthodontic wires with nanoparticles can result in a successful reduction of this friction. The objective of this study is to develop a novel method of coating orthodontic archwires with nanoparticles. Materials and Methods: Stainless steel (Ormco, CA, USA), titanium molybdenum alloy (Ormco, CA, USA) and nickel-titanium (G and H Wire Company, USA) orthodontic wires with a rectangular cross-section dimension of 0.019”× 0.025”, were selected. The wires were later coated with a uniform and smooth nanoparticle film using 100 ml nanocremics. The coating procedure described in this article is a sol-gel thin film dip coating method. Results: The coating procedure was verified by comparing the surface topography of nanocoated archwires with the commercially available archwires in an environmental scanning electron microscope (ESEM). The ESEM images prove that the surface topography of the coated wires was found to be smoother with less surface deteriorations as compared to the commercially available wires. Conclusion: Commercially available orthodontic wires can be successfully coated using a novel method of sol-gel thin film dip coating method. PMID:26028899

An interprojection sensor fusion approach to estimate blocked projection signal in synchronized moving grid-based CBCT system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Hong; Kong, Vic; Ren, Lei

2016-01-15

Purpose: A preobject grid can reduce and correct scatter in cone beam computed tomography (CBCT). However, half of the signal in each projection is blocked by the grid. A synchronized moving grid (SMOG) has been proposed to acquire two complimentary projections at each gantry position and merge them into one complete projection. That approach, however, suffers from increased scanning time and the technical difficulty of accurately merging the two projections per gantry angle. Herein, the authors present a new SMOG approach which acquires a single projection per gantry angle, with complimentary grid patterns for any two adjacent projections, and usemore » an interprojection sensor fusion (IPSF) technique to estimate the blocked signal in each projection. The method may have the additional benefit of reduced imaging dose due to the grid blocking half of the incident radiation. Methods: The IPSF considers multiple paired observations from two adjacent gantry angles as approximations of the blocked signal and uses a weighted least square regression of these observations to finally determine the blocked signal. The method was first tested with a simulated SMOG on a head phantom. The signal to noise ratio (SNR), which represents the difference of the recovered CBCT image to the original image without the SMOG, was used to evaluate the ability of the IPSF in recovering the missing signal. The IPSF approach was then tested using a Catphan phantom on a prototype SMOG assembly installed in a bench top CBCT system. Results: In the simulated SMOG experiment, the SNRs were increased from 15.1 and 12.7 dB to 35.6 and 28.9 dB comparing with a conventional interpolation method (inpainting method) for a projection and the reconstructed 3D image, respectively, suggesting that IPSF successfully recovered most of blocked signal. In the prototype SMOG experiment, the authors have successfully reconstructed a CBCT image using the IPSF-SMOG approach. The detailed geometric features in the Catphan phantom were mostly recovered according to visual evaluation. The scatter related artifacts, such as cupping artifacts, were almost completely removed. Conclusions: The IPSF-SMOG is promising in reducing scatter artifacts and improving image quality while reducing radiation dose.« less

A reduced successive quadratic programming strategy for errors-in-variables estimation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tjoa, I.-B.; Biegler, L. T.; Carnegie-Mellon Univ.

Parameter estimation problems in process engineering represent a special class of nonlinear optimization problems, because the maximum likelihood structure of the objective function can be exploited. Within this class, the errors in variables method (EVM) is particularly interesting. Here we seek a weighted least-squares fit to the measurements with an underdetermined process model. Thus, both the number of variables and degrees of freedom available for optimization increase linearly with the number of data sets. Large optimization problems of this type can be particularly challenging and expensive to solve because, for general-purpose nonlinear programming (NLP) algorithms, the computational effort increases atmore » least quadratically with problem size. In this study we develop a tailored NLP strategy for EVM problems. The method is based on a reduced Hessian approach to successive quadratic programming (SQP), but with the decomposition performed separately for each data set. This leads to the elimination of all variables but the model parameters, which are determined by a QP coordination step. In this way the computational effort remains linear in the number of data sets. Moreover, unlike previous approaches to the EVM problem, global and superlinear properties of the SQP algorithm apply naturally. Also, the method directly incorporates inequality constraints on the model parameters (although not on the fitted variables). This approach is demonstrated on five example problems with up to 102 degrees of freedom. Compared to general-purpose NLP algorithms, large improvements in computational performance are observed.« less

Free-standing ultrathin CoMn2O4 nanosheets anchored on reduced graphene oxide for high-performance supercapacitors.

PubMed

Gao, Guoxin; Lu, Shiyao; Xiang, Yang; Dong, Bitao; Yan, Wei; Ding, Shujiang

2015-11-21

Ultrathin CoMn2O4 nanosheets supported on reduced graphene oxide (rGO) are successfully synthesized through a simple co-precipitation method with a post-annealing treatment. With the assistance of citrate, the free-standing CoMn2O4 ultrathin nanosheets can form porous overlays on both sides of the rGO sheets. Such a novel hybrid nanostructure can effectively promote charge transport and accommodate volume variation upon prolonged charge/discharge cycling. When evaluated as a promising electrode for supercapacitors in a 6 M KOH solution electrolyte, the hybrid nanocomposites demonstrate highly enhanced capacitance and excellent cycling stability.

Reducing Length of Stay in Total Joint Arthroplasty Care.

PubMed

Walters, Megan; Chambers, Monique C; Sayeed, Zain; Anoushiravani, Afshin A; El-Othmani, Mouhanad M; Saleh, Khaled J

2016-10-01

As health care reforms continue to improve quality of care, significant emphasis will be placed on evaluation of orthopedic patient outcomes. Total joint arthroplasty (TJA) has a proven track record of enhancing patient quality of life and are easily replicable. The outcomes of these procedures serve as a measure of health care initiative success. Specifically, length of stay, will be targeted as a marker of quality of surgical care delivered to TJA patients. Within this review, we will discuss preoperative and postoperative methods by which orthopedic surgeons may enhance TJA outcomes and effectively reduce length of stay. Copyright © 2016 Elsevier Inc. All rights reserved.

Experimental investigation of elastic mode control on a model of a transport aircraft

NASA Technical Reports Server (NTRS)

Abramovitz, M.; Heimbaugh, R. M.; Nomura, J. K.; Pearson, R. M.; Shirley, W. A.; Stringham, R. H.; Tescher, E. L.; Zoock, I. E.

1981-01-01

A 4.5 percent DC-10 derivative flexible model with active controls is fabricated, developed, and tested to investigate the ability to suppress flutter and reduce gust loads with active controlled surfaces. The model is analyzed and tested in both semispan and complete model configuration. Analytical methods are refined and control laws are developed and successfully tested on both versions of the model. A 15 to 25 percent increase in flutter speed due to the active system is demonstrated. The capability of an active control system to significantly reduce wing bending moments due to turbulence is demonstrated. Good correlation is obtained between test and analytical prediction.

Zebrafish reproduction: revisiting in vitro fertilization to increase sperm cryopreservation success.

PubMed

Hagedorn, Mary; Carter, Virginia L

2011-01-01

Although conventional cryopreservation is a proven method for long-term, safe storage of genetic material, protocols used by the zebrafish community are not standardized and yield inconsistent results, thereby putting the security of many genotypes in individual laboratories and stock centers at risk. An important challenge for a successful zebrafish sperm cryopreservation program is the large variability in the post-thaw in vitro fertilization success (0 to 80%). But how much of this variability was due to the reproductive traits of the in vitro fertilization process, and not due to the cryopreservation process? These experiments only assessed the in vitro process with fresh sperm, but yielded the basic metrics needed for successful in vitro fertilization using cryopreserved sperm, as well. We analyzed the reproductive traits for zebrafish males with a strict body condition range. It did not correlate with sperm volume, or motility (P>0.05), but it did correlate with sperm concentration. Younger males produced more concentrated sperm (P<0.05). To minimize the wastage of sperm during the in vitro fertilization process, 10(6) cells/ml was the minimum sperm concentration needed to achieve an in vitro fertilization success of ≥ 70%. During the in vitro process, pooling sperm did not reduce fertilization success (P>0.05), but pooling eggs reduced it by approximately 30 to 50% (P<0.05). This reduction in fertilization success was due not to the pooling of the females' eggs, but to the type of tools used to handle the eggs. Recommendations to enhance the in vitro process for zebrafish include: 1) using males of a body condition closer to 1.5 for maximal sperm concentration; 2) minimizing sperm wastage by using a working sperm concentration of 10(6) motile cells/ml for in vitro fertilization; and 3) never using metal or sharp-edged tools to handle eggs prior to fertilization.

Zebrafish Reproduction: Revisiting In Vitro Fertilization to Increase Sperm Cryopreservation Success

PubMed Central

Hagedorn, Mary; Carter, Virginia L.

2011-01-01

Although conventional cryopreservation is a proven method for long-term, safe storage of genetic material, protocols used by the zebrafish community are not standardized and yield inconsistent results, thereby putting the security of many genotypes in individual laboratories and stock centers at risk. An important challenge for a successful zebrafish sperm cryopreservation program is the large variability in the post-thaw in vitro fertilization success (0 to 80%). But how much of this variability was due to the reproductive traits of the in vitro fertilization process, and not due to the cryopreservation process? These experiments only assessed the in vitro process with fresh sperm, but yielded the basic metrics needed for successful in vitro fertilization using cryopreserved sperm, as well. We analyzed the reproductive traits for zebrafish males with a strict body condition range. It did not correlate with sperm volume, or motility (P>0.05), but it did correlate with sperm concentration. Younger males produced more concentrated sperm (P<0.05). To minimize the wastage of sperm during the in vitro fertilization process, 106 cells/ml was the minimum sperm concentration needed to achieve an in vitro fertilization success of ≥ 70%. During the in vitro process, pooling sperm did not reduce fertilization success (P>0.05), but pooling eggs reduced it by approximately 30 to 50% (P<0.05). This reduction in fertilization success was due not to the pooling of the females' eggs, but to the type of tools used to handle the eggs. Recommendations to enhance the in vitro process for zebrafish include: 1) using males of a body condition closer to 1.5 for maximal sperm concentration; 2) minimizing sperm wastage by using a working sperm concentration of 106 motile cells/ml for in vitro fertilization; and 3) never using metal or sharp-edged tools to handle eggs prior to fertilization. PMID:21698162

Mixed models and reduction method for dynamic analysis of anisotropic shells

NASA Technical Reports Server (NTRS)

Noor, A. K.; Peters, J. M.

1985-01-01

A time-domain computational procedure is presented for predicting the dynamic response of laminated anisotropic shells. The two key elements of the procedure are: (1) use of mixed finite element models having independent interpolation (shape) functions for stress resultants and generalized displacements for the spatial discretization of the shell, with the stress resultants allowed to be discontinuous at interelement boundaries; and (2) use of a dynamic reduction method, with the global approximation vectors consisting of the static solution and an orthogonal set of Lanczos vectors. The dynamic reduction is accomplished by means of successive application of the finite element method and the classical Rayleigh-Ritz technique. The finite element method is first used to generate the global approximation vectors. Then the Rayleigh-Ritz technique is used to generate a reduced system of ordinary differential equations in the amplitudes of these modes. The temporal integration of the reduced differential equations is performed by using an explicit half-station central difference scheme (Leap-frog method). The effectiveness of the proposed procedure is demonstrated by means of a numerical example and its advantages over reduction methods used with the displacement formulation are discussed.

Model-size reduction for the buckling and vibration analyses of anisotropic panels

NASA Technical Reports Server (NTRS)

Noor, A. K.; Whitworth, S. L.

1986-01-01

A computational procedure is presented for reducing the size of the model used in the buckling and vibration analyses of symmetric anisotropic panels to that of the corresponding orthotropic model. The key elements of the procedure are the application of an operator splitting technique through the decomposition of the material stiffness matrix of the panel into the sum of orthotropic and nonorthotropic (anisotropic) parts and the use of a reduction method through successive application of the finite element method and the classical Rayleigh-Ritz technique. The effectiveness of the procedure is demonstrated by numerical examples.

Hydrodynamic cavitation: from theory towards a new experimental approach

NASA Astrophysics Data System (ADS)

Lucia, Umberto; Gervino, Gianpiero

2009-09-01

Hydrodynamic cavitation is analysed by a global thermodynamics principle following an approach based on the maximum irreversible entropy variation that has already given promising results for open systems and has been successfully applied in specific engineering problems. In this paper we present a new phenomenological method to evaluate the conditions inducing cavitation. We think this method could be useful in the design of turbo-machineries and related technologies: it represents both an original physical approach to cavitation and an economical saving in planning because the theoretical analysis could allow engineers to reduce the experimental tests and the costs of the design process.

The cooperative effect of reduced graphene oxide and Triton X-114 on the electromembrane microextraction efficiency of Pramipexole as a model analyte in urine samples.

PubMed

Fashi, Armin; Khanban, Fatemeh; Yaftian, Mohammad Reza; Zamani, Abbasali

2017-01-01

A new design of electromembrane microextraction coupled with high-performance liquid chromatography was developed for the determination of Pramipexole as a model analyte in urine samples. The presence of reduced graphene oxide in the membrane and Triton X-114 in the donor phase augments the extraction efficiency of Pramipexole by the proposed method. Dispersed reduced graphene oxide in the organic solvent was held in the pores of the fiber wall by capillary forces and sonication. It is possible that the immobilized reduced graphene oxide acts as a sorbent, affording an additional pathway for analyte transportation. Besides, the presence of Triton X-114 in the donor phase promotes effective migration of ionic analytes across the membrane. The parameters influencing the extraction procedure, such as type and concentration of surfactant, type of organic solvent, amount of reduced graphene oxide, sonication time, applied voltage, extraction time, ionic strength, pH of the donor and acceptor solutions, and stirring rate were optimized. The linear working ranges of the method for preconcentration- determination of Pramipexole in water and urine samples were found to be 0.13-1000 and 0.47-1000ngmL -1 with corresponding detection limits of 0.04 and 0.14ngmL -1 , respectively. The proposed method allows achieving enrichment factors of 301 and 265 for preconcentration of the analyte in water and urine samples, respectively. The method was successfully applied for the determination of Pramipexole in the urine samples. Copyright © 2016 Elsevier B.V. All rights reserved.

Localized surface plasmon resonance of gold nanoparticles as colorimetric probes for determination of Isoniazid in pharmacological formulation.

PubMed

Zargar, Behrooz; Hatamie, Amir

2013-04-01

Isoniazid is an important antibiotic, which is widely used to treat tuberculosis. This study presents a colorimetric method for the determination of Isoniazid based on localized surface plasmon resonance (LSPR) property of gold nanoparticles. An LSPR band is produced by reducing gold ions in solution using Isoniazid as the reducing agent. Influences of the following relevant variables were examined and optimized in the experiment, formation time of gold nanoparticles, pH, buffer and stabilizer. These tests demonstrated that under optimum conditions the absorbance of Au nanoparticles at 530 nm related linearly to the concentration of Isoniazid in the range of 1.0-8.0 μg mL(-1) with a detection limit of 0.98 μg mL(-1). This colorimetric method has been successfully applied to the determine Isoniazid in tablets and spiked serum samples. The proposed colorimetric assay exhibits good reproducibility and accuracy, providing a simple and rapid method for analysis of Isoniazid. Copyright © 2013 Elsevier B.V. All rights reserved.

Localized surface plasmon resonance of gold nanoparticles as colorimetric probes for determination of Isoniazid in pharmacological formulation

NASA Astrophysics Data System (ADS)

Zargar, Behrooz; Hatamie, Amir

2013-04-01

Isoniazid is an important antibiotic, which is widely used to treat tuberculosis. This study presents a colorimetric method for the determination of Isoniazid based on localized surface plasmon resonance (LSPR) property of gold nanoparticles. An LSPR band is produced by reducing gold ions in solution using Isoniazid as the reducing agent. Influences of the following relevant variables were examined and optimized in the experiment, formation time of gold nanoparticles, pH, buffer and stabilizer. These tests demonstrated that under optimum conditions the absorbance of Au nanoparticles at 530 nm related linearly to the concentration of Isoniazid in the range of 1.0-8.0 μg mL-1 with a detection limit of 0.98 μg mL-1. This colorimetric method has been successfully applied to the determine Isoniazid in tablets and spiked serum samples. The proposed colorimetric assay exhibits good reproducibility and accuracy, providing a simple and rapid method for analysis of Isoniazid.

Automatic Diagnosis of Obstructive Sleep Apnea/Hypopnea Events Using Respiratory Signals.

PubMed

Aydoğan, Osman; Öter, Ali; Güney, Kerim; Kıymık, M Kemal; Tuncel, Deniz

2016-12-01

Obstructive sleep apnea is a sleep disorder which may lead to various results. While some studies used real-time systems, there are also numerous studies which focus on diagnosing Obstructive Sleep Apnea via signals obtained by polysomnography from apnea patients who spend the night in sleep laboratory. The mean, frequency and power of signals obtained from patients are frequently used. Obstructive Sleep Apnea of 74 patients were scored in this study. A visual-scoring based algorithm and a morphological filter via Artificial Neural Networks were used in order to diagnose Obstructive Sleep Apnea. After total accuracy of scoring was calculated via both methods, it was compared with visual scoring performed by the doctor. The algorithm used in the diagnosis of obstructive sleep apnea reached an average accuracy of 88.33 %, while Artificial Neural Networks and morphological filter method reached a success of 87.28 %. Scoring success was analyzed after it was grouped based on apnea/hypopnea. It is considered that both methods enable doctors to reduce time and costs in the diagnosis of Obstructive Sleep Apnea as well as ease of use.

[Influence of local anaesthesia on short- and long-term pain induced in calves by three bloodless castration methods].

PubMed

Thüer, S; Doherr, M G; Wechsler, B; Mellema, S C; Nuss, K; Kirchhofer, M; Steiner, A

2007-05-01

Behavioural and cortisol responses of calves were used as indicators of pain to assess short- and long-term effects of three bloodless castration methods with and without local anaesthesia. Eighty calves, aged 21 to 28 days, were control handled (20) or castrated by Burdizzo (25), rubber ring (25), or crushing technique (10). Either a total volume of 10 ml of Lidocaine or NaCl was distributed in both spermatic cords and the scrotal neck. The plasma cortisol response was monitored for 72 hours, and behavioural and clinical traits over a three-month period. Castration success was assessed by degree of atrophy and histological tissue examination. The crushing technique cannot be recommended due to incomplete castration success, and the evaluation was stopped after 10 animals. Local anaesthesia reduced the level of indicators of acute pain after Burdizzo and rubber ring technique. It did, however, not result in a totally painless castration. When castration is performed at the age of 3 to 4 weeks, the rubber ring but not the Burdizzo method showed evidence of chronic pain lasting for several weeks.

Toward risk reduction: predicting the future burden of occupational cancer.

PubMed

Hutchings, Sally; Rushton, Lesley

2011-05-01

Interventions to reduce cancers related to certain occupations should be evidence-based. The authors have developed a method for forecasting the future burden of occupational cancer to inform strategies for risk reduction. They project risk exposure periods, accounting for cancer latencies of up to 50 years, forward in time to estimate attributable fractions for a series of forecast target years given past and projected exposure trends and under targeted reduction scenarios. Adjustment factors for changes in exposed numbers and levels are applied in estimation intervals within the risk-exposure periods. The authors illustrate the methods by using a range of scenarios for reducing lung cancer due to occupational exposure to respirable crystalline silica. Attributable fractions for lung cancer due to respirable crystalline silica could be potentially reduced from 2.07% in 2010 to nearly 0% by 2060, depending on the timing and success of interventions. Focusing on achieving compliance with current exposure standards in small industries can be more effective than setting standards at a lower level. The method can be used to highlight high-risk carcinogens, industries, and occupations. It is adaptable for other countries and other exposure situations in the general environment and can be extended to include socioeconomic impact assessment.

Damage location and quantification of a pretensioned concrete beam using stochastic subspace identification

NASA Astrophysics Data System (ADS)

Cancelli, Alessandro; Micheli, Laura; Laflamme, Simon; Alipour, Alice; Sritharan, Sri; Ubertini, Filippo

2017-04-01

Stochastic subspace identification (SSID) is a first-order linear system identification technique enabling modal analysis through the time domain. Research in the field of structural health monitoring has demonstrated that SSID can be used to successfully retrieve modal properties, including modal damping ratios, using output-only measurements. In this paper, the utilization of SSID for indirectly retrieving structures' stiffness matrix was investigated, through the study of a simply supported reinforced concrete beam subjected to dynamic loads. Hence, by introducing a physical model of the structure, a second-order identification method is achieved. The reconstruction is based on system condensation methods, which enables calculation of reduced order stiffness, damping, and mass matrices for the structural system. The methods compute the reduced order matrices directly from the modal properties, obtained through the use of SSID. Lastly, the reduced properties of the system are used to reconstruct the stiffness matrix of the beam. The proposed approach is first verified through numerical simulations and then validated using experimental data obtained from a full-scale reinforced concrete beam that experienced progressive damage. Results show that the SSID technique can be used to diagnose, locate, and quantify damage through the reconstruction of the stiffness matrix.

Low/No Calorie Sweetened Beverage Consumption in the National Weight Control Registry

PubMed Central

Catenacci, Victoria A.; Pan, Zhaoxing; Thomas, J. Graham; Ogden, Lorraine G.; Roberts, Susan A.; Wyatt, Holly R.; Wing, Rena R.; Hill, James O.

2015-01-01

Objective The aim of this cross-sectional study was to evaluate prevalence of and strategies behind low/no calorie sweetened beverage (LNCSB) consumption in successful weight loss maintainers. Methods An online survey was administered to 434 members of the National Weight Control Registry (NWCR, individuals who have lost ≥13.6 kg and maintained weight loss for > 1 year). Results While few participants (10%) consume sugar-sweetened beverages on a regular basis, 53% regularly consume LNCSB. The top five reasons for choosing LNCSB were for taste (54%), to satisfy thirst (40%), part of routine (27%), to reduce calories (22%) and to go with meals (21%). The majority who consume LNCSB (78%) felt they helped control total calorie intake. Many participants considered changing patterns of beverage consumption to be very important in weight loss (42%) and maintenance (40%). Increasing water was by far the most common strategy, followed by reducing regular calorie beverages. Conclusions Regular consumption of LNCSB is common in successful weight loss maintainers for various reasons including helping individuals to limit total energy intake. Changing beverage consumption patterns was felt to be very important for weight loss and maintenance by a substantial percentage of successful weight loss maintainers in the NWCR. PMID:25044563

Computerized optimization of multiple isocentres in stereotactic convergent beam irradiation

NASA Astrophysics Data System (ADS)

Treuer, U.; Treuer, H.; Hoevels, M.; Müller, R. P.; Sturm, V.

1998-01-01

A method for the fully computerized determination and optimization of positions of target points and collimator sizes in convergent beam irradiation is presented. In conventional interactive trial and error methods, which are very time consuming, the treatment parameters are chosen according to the operator's experience and improved successively. This time is reduced significantly by the use of a computerized procedure. After the definition of target volume and organs at risk in the CT or MR scans, an initial configuration is created automatically. In the next step the target point positions and collimator diameters are optimized by the program. The aim of the optimization is to find a configuration for which a prescribed dose at the target surface is approximated as close as possible. At the same time dose peaks inside the target volume are minimized and organs at risk and tissue surrounding the target are spared. To enhance the speed of the optimization a fast method for approximate dose calculation in convergent beam irradiation is used. A possible application of the method for calculating the leaf positions when irradiating with a micromultileaf collimator is briefly discussed. The success of the procedure has been demonstrated for several clinical cases with up to six target points.

Fast inverse scattering solutions using the distorted Born iterative method and the multilevel fast multipole algorithm

PubMed Central

Hesford, Andrew J.; Chew, Weng C.

2010-01-01

The distorted Born iterative method (DBIM) computes iterative solutions to nonlinear inverse scattering problems through successive linear approximations. By decomposing the scattered field into a superposition of scattering by an inhomogeneous background and by a material perturbation, large or high-contrast variations in medium properties can be imaged through iterations that are each subject to the distorted Born approximation. However, the need to repeatedly compute forward solutions still imposes a very heavy computational burden. To ameliorate this problem, the multilevel fast multipole algorithm (MLFMA) has been applied as a forward solver within the DBIM. The MLFMA computes forward solutions in linear time for volumetric scatterers. The typically regular distribution and shape of scattering elements in the inverse scattering problem allow the method to take advantage of data redundancy and reduce the computational demands of the normally expensive MLFMA setup. Additional benefits are gained by employing Kaczmarz-like iterations, where partial measurements are used to accelerate convergence. Numerical results demonstrate both the efficiency of the forward solver and the successful application of the inverse method to imaging problems with dimensions in the neighborhood of ten wavelengths. PMID:20707438

A Fast Multiple Sampling Method for Low-Noise CMOS Image Sensors With Column-Parallel 12-bit SAR ADCs

PubMed Central

Kim, Min-Kyu; Hong, Seong-Kwan; Kwon, Oh-Kyong

2015-01-01

This paper presents a fast multiple sampling method for low-noise CMOS image sensor (CIS) applications with column-parallel successive approximation register analog-to-digital converters (SAR ADCs). The 12-bit SAR ADC using the proposed multiple sampling method decreases the A/D conversion time by repeatedly converting a pixel output to 4-bit after the first 12-bit A/D conversion, reducing noise of the CIS by one over the square root of the number of samplings. The area of the 12-bit SAR ADC is reduced by using a 10-bit capacitor digital-to-analog converter (DAC) with four scaled reference voltages. In addition, a simple up/down counter-based digital processing logic is proposed to perform complex calculations for multiple sampling and digital correlated double sampling. To verify the proposed multiple sampling method, a 256 × 128 pixel array CIS with 12-bit SAR ADCs was fabricated using 0.18 μm CMOS process. The measurement results shows that the proposed multiple sampling method reduces each A/D conversion time from 1.2 μs to 0.45 μs and random noise from 848.3 μV to 270.4 μV, achieving a dynamic range of 68.1 dB and an SNR of 39.2 dB. PMID:26712765

Comparative analysis of Gram's stain, PNA-FISH and Sepsityper with MALDI-TOF MS for the identification of yeast direct from positive blood cultures.

PubMed

Gorton, Rebecca L; Ramnarain, P; Barker, K; Stone, N; Rattenbury, S; McHugh, T D; Kibbler, C C

2014-10-01

Fungaemia diagnosis could be improved by reducing the time to identification of yeast from blood cultures. This study aimed to evaluate three rapid methods for the identification of yeast direct from blood cultures; Gram's stain analysis, the AdvanDX Peptide Nucleic Acid in Situ Hybridisation Yeast Traffic Light system (PNA-FISH YTL) and Bruker Sepsityper alongside matrix-assisted laser desorption ionisation time of flight mass spectrometry (MALDI-TOF MS). Fifty blood cultures spiked with a known single yeast strain were analysed by blinded operators experienced in each method. Identifications were compared with MALDI-TOF MS CHROMagar Candida culture and ITS rRNA sequence-based identifications. On first attempt, success rates of 96% (48/50) and 76% (36/50) were achieved using PNA-FISH YTL and Gram's stain respectively. MALDI-TOF MS demonstrated a success rate of 56% (28/50) when applying manufacturer's species log score thresholds and 76% (38/50) using in-house parameters, including lowering the species log score threshold to >1.5. In conclusion, PNA-FISH YTL demonstrated a high success rate successfully identifying yeast commonly encountered in fungaemia. Sepsityper(™) with MALDI-TOF MS was accurate but increased sensitivity is required. Due to the misidentification of commonly encountered yeast Gram's stain analysis demonstrated limited utility in this setting. © 2014 Blackwell Verlag GmbH.

How guiding coalitions promote positive culture change in hospitals: a longitudinal mixed methods interventional study.

PubMed

Bradley, Elizabeth H; Brewster, Amanda L; McNatt, Zahirah; Linnander, Erika L; Cherlin, Emily; Fosburgh, Heather; Ting, Henry H; Curry, Leslie A

2018-03-01

Quality collaboratives are widely endorsed as a potentially effective method for translating and spreading best practices for acute myocardial infarction (AMI) care. Nevertheless, hospital success in improving performance through participation in collaboratives varies markedly. We sought to understand what distinguished hospitals that succeeded in shifting culture and reducing 30-day risk-standardised mortality rate (RSMR) after AMI through their participation in the Leadership Saves Lives (LSL) collaborative. We conducted a longitudinal, mixed methods intervention study of 10 hospitals over a 2-year period; data included surveys of 223 individuals (response rates 83%-94% depending on wave) and 393 in-depth interviews with clinical and management staff most engaged with the LSL intervention in the 10 hospitals. We measured change in culture and RSMR, and key aspects of working related to team membership, turnover, level of participation and approaches to conflict management. The six hospitals that experienced substantial culture change and greater reductions in RSMR demonstrated distinctions in: (1) effective inclusion of staff from different disciplines and levels in the organisational hierarchy in the team guiding improvement efforts (referred to as the 'guiding coalition' in each hospital); (2) authentic participation in the work of the guiding coalition; and (3) distinct patterns of managing conflict. Guiding coalition size and turnover were not associated with success (p values>0.05). In the six hospitals that experienced substantial positive culture change, staff indicated that the LSL learnings were already being applied to other improvement efforts. Hospitals that were most successful in a national quality collaborative to shift hospital culture and reduce RSMR showed distinct patterns in membership diversity, authentic participation and capacity for conflict management. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Absolute Paleointensity Estimates using Combined Shaw and Pseudo-Thellier Experimental Protocols

NASA Astrophysics Data System (ADS)

Foucher, M. S.; Smirnov, A. V.

2016-12-01

Data on the long-term evolution of Earth's magnetic field intensity have a great potential to advance our understanding of many aspects of the Earth's evolution. However, paleointensity determination is one of the most challenging aspects of paleomagnetic research so the quantity and quality of existing paleointensity data remain limited, especially for older epochs. While the Thellier double-heating method remains to be the most commonly used paleointensity technique, its applicability is limited for many rocks that undergo magneto-mineralogical alteration during the successive heating steps required by the method. In order to reduce the probability of alteration, several alternative methods that involve a limited number of or no heating steps have been proposed. However, continued efforts are needed to better understand the physical foundations and relative efficiency of reduced/non-heating methods in recovering the true paleofield strength and to better constrain their calibration factors. We will present the results of our investigation of synthetic and natural magnetite-bearing samples using a combination of the LTD-DHT Shaw and pseudo-Thellier experimental protocols for absolute paleointensity estimation.

Sound source identification and sound radiation modeling in a moving medium using the time-domain equivalent source method.

PubMed

Zhang, Xiao-Zheng; Bi, Chuan-Xing; Zhang, Yong-Bin; Xu, Liang

2015-05-01

Planar near-field acoustic holography has been successfully extended to reconstruct the sound field in a moving medium, however, the reconstructed field still contains the convection effect that might lead to the wrong identification of sound sources. In order to accurately identify sound sources in a moving medium, a time-domain equivalent source method is developed. In the method, the real source is replaced by a series of time-domain equivalent sources whose strengths are solved iteratively by utilizing the measured pressure and the known convective time-domain Green's function, and time averaging is used to reduce the instability in the iterative solving process. Since these solved equivalent source strengths are independent of the convection effect, they can be used not only to identify sound sources but also to model sound radiations in both moving and static media. Numerical simulations are performed to investigate the influence of noise on the solved equivalent source strengths and the effect of time averaging on reducing the instability, and to demonstrate the advantages of the proposed method on the source identification and sound radiation modeling.

Infrared light-assisted preparation of Ag nanoparticles-reduced graphene oxide nanocomposites for non-enzymatic H{sub 2}O{sub 2} sensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ji, Ye; State Key Laboratory of Transducer Technology, Chinese Academy of Sciences; Zhang, Yong

2015-12-15

Graphical abstract: An infrared light irradiation method has been developed for preparation of AgNPs/rGO nanocomposites for electrochemical detection of H{sub 2}O{sub 2}. - Highlights: • AgNPs/rGO nanocomposites have been prepared by photochemical method. • AgNPs/rGO nanocomposites exhibit good sensing performances for detection of H{sub 2}O{sub 2}. • The present work provides a simple and green method for preparation of rGO-based materials. - Abstract: A green method has been developed for preparation of Ag nanoparticles/reduced graphene oxide (AgNPs/rGO) nanocomposites by infrared light irradiation. The characterizations indicate the successful preparation of AgNPs/rGO nanocomposites. Most importantly, AgNPs/rGO nanocomposites exhibit excellent electrocatalytic activity formore » reduction of H{sub 2}O{sub 2}, leading to a high-performance non-enzymatic H{sub 2}O{sub 2} sensor with linear detection range and detection limit about 0.1 mM to 140 mM (r = 0.9896) and 3.0 μM, respectively.« less

Solidification Based Grain Refinement in Steels

DTIC Science & Technology

2010-07-20

methods which worked in the SVSU foundry. However, additions of NbO powder, FeTi, misch metal , and rare earth silicide were successful. Misch metal ...and rare earth silicide additions at the ladle are the most promising from an industrial stand point. The project group has begun preparing for the... metal and rare earth silicide additions have also reduced grain size and improved hardness. Instructions: You may use this MS Word file to submit the

Wellness programs: a remedy for reducing healthcare costs.

PubMed

Kocakulah, Mehmet C; Joseforsky, Holly

2002-01-01

Offering wellness programs has become a popular method for preserving the health of employees in the hope of generating lower healthcare expenses and, in turn, higher profits. This article offers a cost/benefits analysis of providing wellness programs, to determine whether such programs could add value to a company. Recommendations follow for how to implement a successful wellness program with minimal initial costs should an analysis find that wellness initiatives would prove beneficial.

The Ontario Cancer Research Ethics Board: a central REB that works

PubMed Central

Chaddah, M.R.

2008-01-01

The Ontario Cancer Research Ethics Board (ocreb) has made its mark within Ontario as a successful, centralized, oncology-specific research ethics board. As such, ocreb has proven invaluable to principal investigators, sponsors, and study participants given its ability to reduce duplication during the submission process, to provide the highest quality of review, to shorten study start-up time, and to implement more efficient methods of reporting serious adverse events. PMID:18317585

Feasibility of MOS Task Analysis and Redesign to Reduce Physical Demands in the U.S. Army

DTIC Science & Technology

1997-12-01

developed to study perchery workers (Scott & Lamb , 1996). Another posture analysis technique is called postural targeting (Corlett, et al., 1979). A...method which had been successfully applied to a variety of situations (Lee & Chiou, 1995; Scott & Lamb , 1996). Some modifications were made in the...Scott, G.B., & Lamb , N.R. (1996). Working practices in a perchery system, using the Ovako Working Posture Analyzing System (OWAS). Applied Ergonomics

Alkali reduction of graphene oxide in molten halide salts: production of corrugated graphene derivatives for high-performance supercapacitors.

PubMed

Abdelkader, Amr M; Vallés, Cristina; Cooper, Adam J; Kinloch, Ian A; Dryfe, Robert A W

2014-11-25

Herein we present a green and facile approach to the successful reduction of graphene oxide (GO) materials using molten halide flux at 370 °C. GO materials have been synthesized using a modified Hummers method and subsequently reduced for periods of up to 8 h. Reduced GO (rGO) flakes have been characterized using X-ray-diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR), all indicating a significantly reduced amount of oxygen-containing functionalities on the rGO materials. Furthermore, impressive electrical conductivities and electrochemical capacitances have been measured for the rGO flakes, which, along with the morphology determined from scanning electron microscopy, highlight the role of surface corrugation in these rGO materials.

A PDE-based methodology for modeling, parameter estimation and feedback control in structural and structural acoustic systems

NASA Technical Reports Server (NTRS)

Banks, H. T.; Brown, D. E.; Metcalf, Vern L.; Silcox, R. J.; Smith, Ralph C.; Wang, Yun

1994-01-01

A problem of continued interest concerns the control of vibrations in a flexible structure and the related problem of reducing structure-borne noise in structural acoustic systems. In both cases, piezoceramic patches bonded to the structures have been successfully used as control actuators. Through the application of a controlling voltage, the patches can be used to reduce structural vibrations which in turn lead to methods for reducing structure-borne noise. A PDE-based methodology for modeling, estimating physical parameters, and implementing a feedback control scheme for problems of this type is discussed. While the illustrating example is a circular plate, the methodology is sufficiently general so as to be applicable in a variety of structural and structural acoustic systems.

Containerless Processing in Reduced Gravity Using the TEMPUS Facility during MSL-1 and MSL-1R

NASA Technical Reports Server (NTRS)

Rogers, Jan R.

1998-01-01

Containerless processing provides a high purity environment for the study of high-temperature, very reactive materials. It is an important method which provides access to the metastable state of an undercooled melt. In the absence of container walls, the nucleation rate is greatly reduced and undercooling up to (Tm-Tn)/Tm approx. equal to 0.2 can be obtained, where Tm and Tn are the melting and nucleation temperatures, respectively. Electromagnetic levitation represents a method particularly well-suited for the study of metallic melts. The TEMPUS (Tiegelfreies ElektroMagnetisches Prozessieren Unter Schwerelosgkeit) facility is a research instrument designed to perform electromagnetic levitation studies in reduced gravity. TEMPUS is a joint undertaking between DARA, the German Space Agency, and the Microgravity Science and Applications Division of NASA. The George C. Marshall Space Flight Center provides the leadership for scientific and management efforts which support the four US PI teams which performed experiments in the TEMPUS facility. The facility is sensitive to accelerations in the 1-10 Hz range. This became evident during the MSL-1 mission. Analysis of accelerometer and video data indicated that loss of sample control occurred during crew exercise periods which created disturbances in this frequency range. Prior to the MSL-1R flight the TEMPUS team, the accelerometer support groups and the mission operations team developed a strategy to provide for the operation of the facility without such disturbances. The successful implementation of this plan led to the highly successful operation of this facility during MSL-1R.

Synthesis, structural and optical properties of ZnO spindle/reduced graphene oxide composites with enhanced photocatalytic activity under visible light irradiation

NASA Astrophysics Data System (ADS)

Prabhu, S.; Pudukudy, M.; Sohila, S.; Harish, S.; Navaneethan, M.; Navaneethan, D.; Ramesh, R.; Hayakawa, Y.

2018-05-01

In the present work, spindle-shaped ZnO and reduced graphene oxide sheets were successfully synthesized by a hydrothermal method and then ZnO/r-GO composite was prepared by a direct solution mixing method. Various characterization results confirmed the interior and surface decoration of spindle-shaped ZnO on the reduced graphene oxide sheets. The phase formation, crystalline structure, morphology, surface states and optical properties were characterized using Powder X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR) and UV-Vis spectroscopy. The X-ray diffraction analysis showed the formation of the hexagonal wurtzite crystalline structure of ZnO with high crystalline quality. The band gap of the ZnO/r-GO composite was found to be low (3.03eV) compared to the band gap of spindle shaped ZnO (3.13 eV), as calculated from optical studies. The spindle-like morphology of the single crystalline ZnO was clearly shown in the electron microscopic images. The chemical bonding and surface states of the samples were studied using XPS measurement. Moreover, a possible growth mechanism for the ZnO spindle was proposed. The catalytic activity of the as-synthesized samples was evaluated for the photodegradation of methylene blue under visible light irradiation. Among the synthesized samples, the ZnO/r-GO composite showed higher degradation efficiency of 93% and successfully reused for four consecutive run without any activity loss.

Biobanking of patient and patient-derived xenograft ovarian tumour tissue: efficient preservation with low and high fetal calf serum based methods.

PubMed

Alkema, Nicolette G; Tomar, Tushar; Duiker, Evelien W; Jan Meersma, Gert; Klip, Harry; van der Zee, Ate G J; Wisman, G Bea A; de Jong, Steven

2015-10-06

Using patient-derived xenografts (PDXs) for preclinical cancer research demands proper storage of tumour material to facilitate logistics and to reduce the number of animals needed. We successfully established 45 subcutaneous ovarian cancer PDXs, reflecting all histological subtypes, with an overall take rate of 68%. Corresponding cells from mouse replaced human tumour stromal and endothelial cells in second generation PDXs as demonstrated with mouse-specific vimentin and CD31 immunohistochemical staining. For biobanking purposes two cryopreservation methods, a fetal calf serum (FCS)-based (95%v/v) "FCS/DMSO" protocol and a low serum-based (10%v/v) "vitrification" protocol were tested. After primary cryopreservation, tumour take rates were 38% and 67% using either the vitrification or FCS/DMSO-based cryopreservation protocol, respectively. Cryopreserved tumour tissue of established PDXs achieved take rates of 67% and 94%, respectively compared to 91% using fresh PDX tumour tissue. Genotyping analysis showed that no changes in copy number alterations were introduced by any of the biobanking methods. Our results indicate that both protocols can be used for biobanking of ovarian tumour and PDX tissues. However, FCS/DMSO-based cryopreservation is more successful. Moreover, primary engraftment of fresh patient-derived tumours in mice followed by freezing tissue of successfully established PDXs is the preferred way of efficient ovarian cancer PDX biobanking.

Anderson acceleration and application to the three-temperature energy equations

NASA Astrophysics Data System (ADS)

An, Hengbin; Jia, Xiaowei; Walker, Homer F.

2017-10-01

The Anderson acceleration method is an algorithm for accelerating the convergence of fixed-point iterations, including the Picard method. Anderson acceleration was first proposed in 1965 and, for some years, has been used successfully to accelerate the convergence of self-consistent field iterations in electronic-structure computations. Recently, the method has attracted growing attention in other application areas and among numerical analysts. Compared with a Newton-like method, an advantage of Anderson acceleration is that there is no need to form the Jacobian matrix. Thus the method is easy to implement. In this paper, an Anderson-accelerated Picard method is employed to solve the three-temperature energy equations, which are a type of strong nonlinear radiation-diffusion equations. Two strategies are used to improve the robustness of the Anderson acceleration method. One strategy is to adjust the iterates when necessary to satisfy the physical constraint. Another strategy is to monitor and, if necessary, reduce the matrix condition number of the least-squares problem in the Anderson-acceleration implementation so that numerical stability can be guaranteed. Numerical results show that the Anderson-accelerated Picard method can solve the three-temperature energy equations efficiently. Compared with the Picard method without acceleration, Anderson acceleration can reduce the number of iterations by at least half. A comparison between a Jacobian-free Newton-Krylov method, the Picard method, and the Anderson-accelerated Picard method is conducted in this paper.

Quickprop method to speed up learning process of Artificial Neural Network in money's nominal value recognition case

NASA Astrophysics Data System (ADS)

Swastika, Windra

2017-03-01

A money's nominal value recognition system has been developed using Artificial Neural Network (ANN). ANN with Back Propagation has one disadvantage. The learning process is very slow (or never reach the target) in the case of large number of iteration, weight and samples. One way to speed up the learning process is using Quickprop method. Quickprop method is based on Newton's method and able to speed up the learning process by assuming that the weight adjustment (E) is a parabolic function. The goal is to minimize the error gradient (E'). In our system, we use 5 types of money's nominal value, i.e. 1,000 IDR, 2,000 IDR, 5,000 IDR, 10,000 IDR and 50,000 IDR. One of the surface of each nominal were scanned and digitally processed. There are 40 patterns to be used as training set in ANN system. The effectiveness of Quickprop method in the ANN system was validated by 2 factors, (1) number of iterations required to reach error below 0.1; and (2) the accuracy to predict nominal values based on the input. Our results shows that the use of Quickprop method is successfully reduce the learning process compared to Back Propagation method. For 40 input patterns, Quickprop method successfully reached error below 0.1 for only 20 iterations, while Back Propagation method required 2000 iterations. The prediction accuracy for both method is higher than 90%.

A Model for QoS – Aware Wireless Communication in Hospitals

PubMed Central

Alavikia, Zahra; Khadivi, Pejman; Hashemi, Masoud Reza

2012-01-01

In the recent decade, research regarding wireless applications in electronic health (e-Health) services has been increasing. The main benefits of using wireless technologies in e-Health applications are simple communications, fast delivery of medical information, reducing treatment cost and also reducing the medical workers’ error rate. However, using wireless communications in sensitive healthcare environment raises electromagnetic interference (EMI). One of the most effective methods to avoid the EMI problem is power management. To this end, some of methods have been proposed in the literature to reduce EMI effects in health care environments. However, using these methods may result in nonaccurate interference avoidance and also may increase network complexity. To overcome these problems, we introduce two approaches based on per-user location and hospital sectoring for power management in sensitive healthcare environments. Although reducing transmission power could avoid EMI, it causes a number of successful message deliveries to the access point to decrease and, hence, the quality of service requirements cannot be meet. In this paper, we propose the use of relays for decreasing the probability of outage in the aforementioned scenario. Relay placement is the main factor to enjoy the usefulness of relay station benefits in the network and, therefore, we use the genetic algorithm to compute the optimum positions of a fixed number of relays. We have considered delay and maximum blind point coverage as two main criteria in relay station problem. The performance of the proposed method in outage reduction is investigated through simulations. PMID:23493832

A Model for QoS - Aware Wireless Communication in Hospitals.

PubMed

Alavikia, Zahra; Khadivi, Pejman; Hashemi, Masoud Reza

2012-01-01

In the recent decade, research regarding wireless applications in electronic health (e-Health) services has been increasing. The main benefits of using wireless technologies in e-Health applications are simple communications, fast delivery of medical information, reducing treatment cost and also reducing the medical workers' error rate. However, using wireless communications in sensitive healthcare environment raises electromagnetic interference (EMI). One of the most effective methods to avoid the EMI problem is power management. To this end, some of methods have been proposed in the literature to reduce EMI effects in health care environments. However, using these methods may result in nonaccurate interference avoidance and also may increase network complexity. To overcome these problems, we introduce two approaches based on per-user location and hospital sectoring for power management in sensitive healthcare environments. Although reducing transmission power could avoid EMI, it causes a number of successful message deliveries to the access point to decrease and, hence, the quality of service requirements cannot be meet. In this paper, we propose the use of relays for decreasing the probability of outage in the aforementioned scenario. Relay placement is the main factor to enjoy the usefulness of relay station benefits in the network and, therefore, we use the genetic algorithm to compute the optimum positions of a fixed number of relays. We have considered delay and maximum blind point coverage as two main criteria in relay station problem. The performance of the proposed method in outage reduction is investigated through simulations.

Successful ageing in lesbian, gay and bisexual older people: a concept analysis.

PubMed

Caceres, Billy A; Frank, Mayu O

2016-09-01

The aim of this study was to report on an analysis of the concept of successful ageing in lesbian, gay and bisexual older people. Research indicates that lesbian, gay and bisexual older people experience significant health disparities. Yet there is a lack of understanding on what factors contribute to successful ageing in this population. Nursing has lagged behind other disciplines in investigating the health of lesbian, gay and bisexual older people. A concept analysis using Rodgers' evolutionary method. Twenty studies were retrieved by searching PubMed, CINAHL, PsycInfo, EMBASE, Cochrane Library and Scopus for English-language peer-reviewed studies published from January 2004 to March 2014. The antecedents, attributes and consequences of the concept were identified through the Rodgers' method of concept analysis. Attributes included support from families of origin and/or families of choice, access to lesbian, gay, and bisexual-friendly services and crisis competence. Self-realisation of lesbian, gay and bisexual identity (coming out to oneself) and age >50 were identified as antecedents. Three consequences of successful ageing in lesbian, gay and bisexual older people were social engagement, optimism and resilience. Successful ageing in lesbian, gay and bisexual older people is defined as a subjective and multifactorial concept that is characterised by support from families of origin/families of choice, access to lesbian, gay, and bisexual-friendly services and the development of crisis competence skills which impact the ageing experience of LGB individuals. Successful ageing models can provide a roadmap for developing culturally competent interventions to address key healthcare issues present in this population. The nursing profession's multidisciplinary knowledge and competence in providing health promotion makes nurses well positioned to take a leading role in reducing disparities of lesbian, gay and bisexual older people. © 2016 John Wiley & Sons Ltd.

Colorimetric Glucose Assay Based on Magnetic Particles Having Pseudo-peroxidase Activity and Immobilized Glucose Oxidase.

PubMed

Martinkova, Pavla; Opatrilova, Radka; Kruzliak, Peter; Styriak, Igor; Pohanka, Miroslav

2016-05-01

Magnetic particles (MPs) are currently used as a suitable alternative for peroxidase in the construction of novel biosensors, analytic and diagnostic methods. Their better chemical and thermal stabilities predestine them as appropriate pseudo-enzymatic catalysts. In this point of view, our research was focused on preparation of simply and fast method for immobilization of glucose oxidase onto surface of MPs with peroxidase-like activity. Spectrophotometric method (wavelength 450 nm) optimized for glucose determination using modified MPs has been successfully developed. Concentration curve for optimization of method was assayed, and Michaelis-Menten constant (K m) calculated, maximum reaction rate (V max), limit of detection, and correlation coefficient were determined to be 0.13 mmol/l (2.34 mg/dl), 1.79 pkat, 3.74 µmol/l (0.067 mg/dl), and 0.996, respectively. Interferences of other sugars such as sucrose, sorbitol, deoxyribose, maltose, and fructose were determined as well as effect of substances presenting in plasma (ascorbic acid, reduced glutathione, trolox, and urea). Results in comparison with positive and negative controls showed no interferences of the other sugars and no influence of plasma substances to measuring of glucose. The constructed method showed corresponding results with linear dependence and a correlation coefficient of 0.997. Possibility of repeated use of modified MPs was successfully proved.

Beating Landauer's Bound: Tradeoff between Accuracy and Heat Dissipation

NASA Astrophysics Data System (ADS)

Talukdar, Saurav; Bhaban, Shreyas; Salapaka, Murti

The Landauer's Principle states that erasing of one bit of stored information is necessarily accompanied by heat dissipation of at least kb Tln 2 per bit. However, this is true only if the erasure process is always successful. We demonstrate that if the erasure process has a success probability p, the minimum heat dissipation per bit is given by kb T(plnp + (1 - p) ln (1 - p) + ln 2), referred to as the Generalized Landauer Bound, which is kb Tln 2 if the erasure process is always successful and decreases to zero as p reduces to 0.5. We present a model for a one-bit memory based on a Brownian particle in a double well potential motivated from optical tweezers and achieve erasure by manipulation of the optical fields. The method uniquely provides with a handle on the success proportion of the erasure. The thermodynamics framework for Langevin dynamics developed by Sekimoto is used for computation of heat dissipation in each realization of the erasure process. Using extensive Monte Carlo simulations, we demonstrate that the Landauer Bound of kb Tln 2 is violated by compromising on the success of the erasure process, while validating the existence of the Generalized Landauer Bound.

Existence of species complex largely reduced barcoding success for invasive species of Tephritidae: a case study in Bactrocera spp.

PubMed

Jiang, F; Jin, Q; Liang, L; Zhang, A B; Li, Z H

2014-11-01

Fruit flies in the family Tephritidae are the economically important pests that have many species complexes. DNA barcoding has gradually been verified as an effective tool for identifying species in a wide range of taxonomic groups, and there are several publications on rapid and accurate identification of fruit flies based on this technique; however, comprehensive analyses of large and new taxa for the effectiveness of DNA barcoding for fruit flies identification have been rare. In this study, we evaluated the COI barcode sequences for the diagnosis of fruit flies using 1426 sequences for 73 species of Bactrocera distributed worldwide. Tree-based [neighbour-joining (NJ)]; distance-based, such as Best Match (BM), Best Close Match (BCM) and Minimum Distance (MD); and character-based methods were used to evaluate the barcoding success rates obtained with maintaining the species complex in the data set, treating a species complex as a single taxon unit, and removing the species complex. Our results indicate that the average divergence between species was 14.04% (0.00-25.16%), whereas within a species this was 0.81% (0.00-9.71%); the existence of species complexes largely reduced the barcoding success for Tephritidae, for example relatively low success rates (74.4% based on BM and BCM and 84.8% based on MD) were obtained when the sequences from species complexes were included in the analysis, whereas significantly higher success rates were achieved if the species complexes were treated as a single taxon or removed from the data set - BM (98.9%), BCM (98.5%) and MD (97.5%), or BM (98.1%), BCM (97.4%) and MD (98.2%). © 2014 John Wiley & Sons Ltd.

A practical approach to automate randomized design of experiments for ligand-binding assays.

PubMed

Tsoi, Jennifer; Patel, Vimal; Shih, Judy

2014-03-01

Design of experiments (DOE) is utilized in optimizing ligand-binding assay by modeling factor effects. To reduce the analyst's workload and error inherent with DOE, we propose the integration of automated liquid handlers to perform the randomized designs. A randomized design created from statistical software was imported into custom macro converting the design into a liquid-handler worklist to automate reagent delivery. An optimized assay was transferred to a contract research organization resulting in a successful validation. We developed a practical solution for assay optimization by integrating DOE and automation to increase assay robustness and enable successful method transfer. The flexibility of this process allows it to be applied to a variety of assay designs.

Combined abiotic and biotic in-situ reduction of hexavalent chromium in groundwater using nZVI and whey: A remedial pilot test.

PubMed

Němeček, Jan; Pokorný, Petr; Lacinová, Lenka; Černík, Miroslav; Masopustová, Zuzana; Lhotský, Ondřej; Filipová, Alena; Cajthaml, Tomáš

2015-12-30

The paper describes a pilot remediation test combining two Cr(VI) geofixation methods - chemical reduction by nanoscale zero-valent iron (nZVI) and subsequent biotic reduction supported by whey. Combination of the methods exploited the advantages of both - a rapid decrease in Cr(VI) concentrations by nZVI, which prevented further spreading of the contamination and facilitated subsequent use of the cheaper biological method. Successive application of whey as an organic substrate to promote biotic reduction of Cr(VI) after application of nZVI resulted in a further and long-term decrease in the Cr(VI) contents in the groundwater. The effect of biotic reduction was observed even in a monitoring well located at a distance of 22 m from the substrate injection wells after 10 months. The results indicated a reciprocal effect of both the phases - nZVI oxidized to Fe(III) during the abiotic phase was microbially reduced back to Fe(II) and acted as a reducing agent for Cr(VI) even when the microbial density was already low due to the consumed substrate. Community analysis with pyrosequencing of the 16S rRNA genes further confirmed partial recycling of nZVI in the form of Fe(II), where the results showed that the Cr(VI) reducing process was mediated mainly by iron-reducing and sulfate-reducing bacteria. Copyright © 2015 Elsevier B.V. All rights reserved.

Accurate mask-based spatially regularized correlation filter for visual tracking

NASA Astrophysics Data System (ADS)

Gu, Xiaodong; Xu, Xinping

2017-01-01

Recently, discriminative correlation filter (DCF)-based trackers have achieved extremely successful results in many competitions and benchmarks. These methods utilize a periodic assumption of the training samples to efficiently learn a classifier. However, this assumption will produce unwanted boundary effects, which severely degrade the tracking performance. Correlation filters with limited boundaries and spatially regularized DCFs were proposed to reduce boundary effects. However, their methods used the fixed mask or predesigned weights function, respectively, which was unsuitable for large appearance variation. We propose an accurate mask-based spatially regularized correlation filter for visual tracking. Our augmented objective can reduce the boundary effect even in large appearance variation. In our algorithm, the masking matrix is converted into the regularized function that acts on the correlation filter in frequency domain, which makes the algorithm fast convergence. Our online tracking algorithm performs favorably against state-of-the-art trackers on OTB-2015 Benchmark in terms of efficiency, accuracy, and robustness.

Developing a spatial-temporal method for the geographic investigation of shoeprint evidence.

PubMed

Lin, Ge; Elmes, Gregory; Walnoha, Mike; Chen, Xiannian

2009-01-01

This article examines the potential of a spatial-temporal method for analysis of forensic shoeprint data. The large volume of shoeprint evidence recovered at crime scenes results in varied success in matching a print to a known shoe type and subsequently linking sets of matched prints to suspected offenders. Unlike DNA and fingerprint data, a major challenge is to reduce the uncertainty in linking sets of matched shoeprints to a suspected serial offender. Shoeprint data for 2004 were imported from the Greater London Metropolitan Area Bigfoot database into a geographic information system, and a spatial-temporal algorithm developed for this project. The results show that by using distance and time constraints interactively, the number of candidate shoeprints that can implicate one or few suspects can be substantially reduced. It concludes that the use of space-time and other ancillary information within a geographic information system can be quite helpful for forensic investigation.

The size-reduced Eudragit® RS microparticles prepared by solvent evaporation method - monitoring the effect of selected variables on tested parameters.

PubMed

Vasileiou, Kalliopi; Vysloužil, Jakub; Pavelková, Miroslava; Vysloužil, Jan; Kubová, Kateřina

2018-01-01

Size-reduced microparticles were successfully obtained by solvent evaporation method. Different parameters were applied in each sample and their influence on microparticles was evaluated. As a model drug the insoluble ibuprofen was selected for the encapsulation process with Eudragit® RS. The obtained microparticles were inspected by optical microscopy and scanning electron microscopy. The effect of aqueous phase volume (600, 400, 200 ml) and the concentration of polyvinyl alcohol (PVA; 1.0% and 0.1%) were studied. It was evaluated how those variations and also size can affect microparticle characteristics such as encapsulation efficiency, drug loading, burst effect and microparticle morphology. It was observed that the sample prepared with 600 ml aqueous phase and 1% concentration of polyvinyl alcohol gave the most favorable results.Key words: microparticles solvent evaporation sustained drug release Eudragit RS®.

Synthesis of Bifunctional Fe3O4@SiO2-Ag Magnetic-Plasmonic Nanoparticles by an Ultrasound Assisted Chemical Method

NASA Astrophysics Data System (ADS)

Chu, Dung Tien; Sai, Doanh Cong; Luu, Quynh Manh; Tran, Hong Thi; Quach, Truong Duy; Kim, Dong Hyun; Nguyen, Nam Hoang

2017-06-01

Bifunctional magnetic-plasmonic nanoparticles (NPs)—Fe3O4@SiO2-Ag were successfully synthesized by an ultrasound assisted chemical method. Silver ions were absorbed and then reduced by sodium borohydride on the surface of 3-aminopropyltriethoxysilane (APTES) functionalized silica-coated magnetic NPs, then they were reduced under the influence of a 200 W ultrasonic wave for 60 min. When the amount of precursor silver ions increased, the relative intensity of diffraction peaks of silver crystals in all samples increased with the atomic ratio of silver/iron increasing from 0.208 to 0.455 and saturation magnetization ( M s) decreasing from 44.68 emu/g to 34.74 emu/g. The NPs have superparamagnetic properties and strong surface plasmon absorption at 420 nm, which make these particles promising for biomedical applications.

A behavioral-level HDL description of SFQ logic circuits for quantitative performance analysis of large-scale SFQ digital systems

NASA Astrophysics Data System (ADS)

Matsuzaki, F.; Yoshikawa, N.; Tanaka, M.; Fujimaki, A.; Takai, Y.

2003-10-01

Recently many single flux quantum (SFQ) logic circuits containing several thousands of Josephson junctions have been designed successfully by using digital domain simulation based on the hard ware description language (HDL). In the present HDL-based design of SFQ circuits, a structure-level HDL description has been used, where circuits are made up of basic gate cells. However, in order to analyze large-scale SFQ digital systems, such as a microprocessor, more higher-level circuit abstraction is necessary to reduce the circuit simulation time. In this paper we have investigated the way to describe functionality of the large-scale SFQ digital circuits by a behavior-level HDL description. In this method, the functionality and the timing of the circuit block is defined directly by describing their behavior by the HDL. Using this method, we can dramatically reduce the simulation time of large-scale SFQ digital circuits.

What Explains Cambodia’s Success in Reducing Child Stunting-2000-2014?

PubMed Central

Zanello, Giacomo; Srinivasan, C. S.; Shankar, Bhavani

2016-01-01

In many developing countries, high levels of child undernutrition persist alongside rapid economic growth. There is considerable interest in the study of countries that have made rapid progress in child nutrition to uncover the driving forces behind these improvements. Cambodia is often cited as a success case having reduced the incidence of child stunting from 51% to 34% over the period 2000 to 2014. To what extent is this success driven by improvements in the underlying determinants of nutrition, such as wealth and education, (“covariate effects”) and to what extent by changes in the strengths of association between these determinants and nutrition outcomes (“coefficient effects”)? Using determinants derived from the widely-applied UNICEF framework for the analysis of child nutrition and data from four Demographic and Health Surveys datasets, we apply quantile regression based decomposition methods to quantify the covariate and coefficient effect contributions to this improvement in child nutrition. The method used in the study allows the covariate and coefficient effects to vary across the entire distribution of child nutrition outcomes. There are important differences in the drivers of improvements in child nutrition between severely stunted and moderately stunted children and between rural and urban areas. The translation of improvements in household endowments, characteristics and practices into improvements in child nutrition (the coefficient effects) may be influenced by macroeconomic shocks or other events such as natural calamities or civil disturbance and may vary substantially over different time periods. Our analysis also highlights the need to explicitly examine the contribution of targeted child health and nutrition interventions to improvements in child nutrition in developing countries. PMID:27649080

Clinical Outcomes of Ahmed Glaucoma Valve Implantation Using Tube Ligation and Removable External Stents

PubMed Central

Lee, Jong Joo; Kim, Dong Myung; Kim, Tae Woo

2009-01-01

Purpose To investigate the immediate and long-term outcomes of Ahmed glaucoma valve (AGV) implantation with silicone tube ligation and removable external stents. Methods This retrospective non-comparative study investigated the outcomes of AGV implantation with silicone tube ligation and removable external stents in 95 eyes (90 patients) with at least 12 months of postoperative follow-up. Qualified success was defined as an intraocular pressure (IOP) of ≤21 mmHg and ≥6 mmHg regardless of anti-glaucoma medication. Those who required additional glaucoma surgery, implant removal or who had phthisis bulbi were considered failures. Hypotony was defined as an IOP of <6 mmHg. Results Mean IOP reduced from 37.1±9.7 mmHg preoperatively to 15.2±5.6 mmHg at 12 months postoperatively (p<0.001). Qualified success was achieved in 84.2% at 1 year. Hypotony with an IOP of <6 mmHg was seen in 8.4% and an IOP of <5 mmHg in 3.2% on the first postoperative day. No case of hypotony required surgical intervention. Suprachoroidal hemorrhage did not occur in this study. When stents were removed on the first postoperative day because of an insufficient IOP decrease, the mean IOP decreased significantly from 42.0 mmHg to 14.1 mmHg (p<0.001) after 1 hour. The most common complication was hyphema, which occurred in 17.9%. Conclusions Hypotony-related early complications requiring surgical intervention were reduced by ligation and external stents in the tube. In addition, early postoperative high IOPs were managed by removing external stents. The described method can prevent postoperative hypotony after AGV implantation and showed long-term success rates comparable to those reported previously. PMID:19568356

Management of Sodium-reduced Meals at Worksite Cafeterias: Perceptions, Practices, Barriers, and Needs among Food Service Personnel.

PubMed

Lee, Jounghee; Park, Sohyun

2016-04-01

The sodium content of meals provided at worksite cafeterias is greater than the sodium content of restaurant meals and home meals. The objective of this study was to assess the relationships between sodium-reduction practices, barriers, and perceptions among food service personnel. We implemented a cross-sectional study by collecting data on perceptions, practices, barriers, and needs regarding sodium-reduced meals at 17 worksite cafeterias in South Korea. We implemented Chi-square tests and analysis of variance for statistical analysis. For post hoc testing, we used Bonferroni tests; when variances were unequal, we used Dunnett T3 tests. This study involved 104 individuals employed at the worksite cafeterias, comprised of 35 men and 69 women. Most of the participants had relatively high levels of perception regarding the importance of sodium reduction (very important, 51.0%; moderately important, 27.9%). Sodium reduction practices were higher, but perceived barriers appeared to be lower in participants with high-level perception of sodium-reduced meal provision. The results of the needs assessment revealed that the participants wanted to have more active education programs targeting the general population. The biggest barriers to providing sodium-reduced meals were use of processed foods and limited methods of sodium-reduced cooking in worksite cafeterias. To make the provision of sodium-reduced meals at worksite cafeterias more successful and sustainable, we suggest implementing more active education programs targeting the general population, developing sodium-reduced cooking methods, and developing sodium-reduced processed foods.

Reduced-gravity environment hardware demonstrations of a prototype miniaturized flow cytometer and companion microfluidic mixing technology.

PubMed

Phipps, William S; Yin, Zhizhong; Bae, Candice; Sharpe, Julia Z; Bishara, Andrew M; Nelson, Emily S; Weaver, Aaron S; Brown, Daniel; McKay, Terri L; Griffin, DeVon; Chan, Eugene Y

2014-11-13

Until recently, astronaut blood samples were collected in-flight, transported to earth on the Space Shuttle, and analyzed in terrestrial laboratories. If humans are to travel beyond low Earth orbit, a transition towards space-ready, point-of-care (POC) testing is required. Such testing needs to be comprehensive, easy to perform in a reduced-gravity environment, and unaffected by the stresses of launch and spaceflight. Countless POC devices have been developed to mimic laboratory scale counterparts, but most have narrow applications and few have demonstrable use in an in-flight, reduced-gravity environment. In fact, demonstrations of biomedical diagnostics in reduced gravity are limited altogether, making component choice and certain logistical challenges difficult to approach when seeking to test new technology. To help fill the void, we are presenting a modular method for the construction and operation of a prototype blood diagnostic device and its associated parabolic flight test rig that meet the standards for flight-testing onboard a parabolic flight, reduced-gravity aircraft. The method first focuses on rig assembly for in-flight, reduced-gravity testing of a flow cytometer and a companion microfluidic mixing chip. Components are adaptable to other designs and some custom components, such as a microvolume sample loader and the micromixer may be of particular interest. The method then shifts focus to flight preparation, by offering guidelines and suggestions to prepare for a successful flight test with regard to user training, development of a standard operating procedure (SOP), and other issues. Finally, in-flight experimental procedures specific to our demonstrations are described.

Reduced-gravity Environment Hardware Demonstrations of a Prototype Miniaturized Flow Cytometer and Companion Microfluidic Mixing Technology

PubMed Central

Bae, Candice; Sharpe, Julia Z.; Bishara, Andrew M.; Nelson, Emily S.; Weaver, Aaron S.; Brown, Daniel; McKay, Terri L.; Griffin, DeVon; Chan, Eugene Y.

2014-01-01

Until recently, astronaut blood samples were collected in-flight, transported to earth on the Space Shuttle, and analyzed in terrestrial laboratories. If humans are to travel beyond low Earth orbit, a transition towards space-ready, point-of-care (POC) testing is required. Such testing needs to be comprehensive, easy to perform in a reduced-gravity environment, and unaffected by the stresses of launch and spaceflight. Countless POC devices have been developed to mimic laboratory scale counterparts, but most have narrow applications and few have demonstrable use in an in-flight, reduced-gravity environment. In fact, demonstrations of biomedical diagnostics in reduced gravity are limited altogether, making component choice and certain logistical challenges difficult to approach when seeking to test new technology. To help fill the void, we are presenting a modular method for the construction and operation of a prototype blood diagnostic device and its associated parabolic flight test rig that meet the standards for flight-testing onboard a parabolic flight, reduced-gravity aircraft. The method first focuses on rig assembly for in-flight, reduced-gravity testing of a flow cytometer and a companion microfluidic mixing chip. Components are adaptable to other designs and some custom components, such as a microvolume sample loader and the micromixer may be of particular interest. The method then shifts focus to flight preparation, by offering guidelines and suggestions to prepare for a successful flight test with regard to user training, development of a standard operating procedure (SOP), and other issues. Finally, in-flight experimental procedures specific to our demonstrations are described. PMID:25490614

Examining risk in mineral exploration

USGS Publications Warehouse

Singer, Donald A.; Kouda, Ryoichi

1999-01-01

Successful mineral exploration strategy requires identification of some of the risk sources and considering them in the decision-making process so that controllable risk can be reduced. Risk is defined as chance of failure or loss. Exploration is an economic activity involving risk and uncertainty, so risk also must be defined in an economic context. Risk reduction can be addressed in three fundamental ways: (1) increasing the number of examinations; (2) increasing success probabilities; and (3) changing success probabilities per test by learning. These provide the framework for examining exploration risk. First, the number of prospects examined is increased, such as by joint venturing, thereby reducing chance of gambler's ruin. Second, success probability is increased by exploring for deposit types more likely to be economic, such as those with a high proportion of world-class deposits. For example, in looking for 100+ ton (>3 million oz) Au deposits, porphyry Cu-Au, or epithermal quartz alunite Au types require examining fewer deposits than Comstock epithermal vein and most other deposit types. For porphyry copper exploration, a strong positive relationship between area of sulfide minerals and deposits' contained Cu can be used to reduce exploration risk by only examining large sulfide systems. In some situations, success probabilities can be increased by examining certain geologic environments. Only 8% of kuroko massive sulfide deposits are world class, but success chances can be increased to about 15% by looking in settings containing sediments and rhyolitic rocks. It is possible to reduce risk of loss during mining by sequentially developing and expanding a mine—thus reducing capital exposed at early stages and reducing present value of risked capital. Because this strategy is easier to apply in some deposit types than in others, the strategy can affect deposit types sought. Third, risk is reduced by using prior information and by changing the independence of trials assumption, that is, by learning. Bayes' formula is used to change the probability of existence of the deposit sought on the basis of successive exploration stages. Perhaps the most important way to reduce exploration risk is to employ personnel with the appropriate experience and yet who are learning.

Motor Vehicle Exhaust Gas Suicide.

PubMed

Routley, Virginia

2007-01-01

In many motorized countries, inhalation of carbon monoxide from motor vehicle exhaust gas (MVEG) has been one of the leading methods of suicide. In some countries it remains so (e.g., Australia 16.0% of suicides in 2005). Relative to other methods it is a planned method and one often used by middle-aged males. The study provides a review of countermeasures aimed at restricting this method of suicide. The prevention measures identified were catalytic converters (introduced to reduce carbon monoxide for environmental reasons); in-cabin sensors; exhaust pipe modification; automatic idling stops; and helpline signage at suicide "hotspots." Catalytic converters are now in 90% of new vehicles worldwide and literature supports them being associated with a reduction in exhaust-gassing suicides. There remain, however, accounts of exhaust-gas fatalities in modern vehicles, whether accidentally or by suicide. These deaths and also crashes from fatigue could potentially be prevented by in-cabin multi-gas sensors, these having been developed to the prototype stage. Helpline signage at an exhaust-gassing suicide "hotspot" had some success in reducing suicides. The evidence on method substitution and whether a reduction in MVEG suicides causes a reduction in total suicides is inconsistent.

An Analytic Hierarchy Process-based Method to Rank the Critical Success Factors of Implementing a Pharmacy Barcode System.

PubMed

Alharthi, Hana; Sultana, Nahid; Al-Amoudi, Amjaad; Basudan, Afrah

2015-01-01

Pharmacy barcode scanning is used to reduce errors during the medication dispensing process. However, this technology has rarely been used in hospital pharmacies in Saudi Arabia. This article describes the barriers to successful implementation of a barcode scanning system in Saudi Arabia. A literature review was conducted to identify the relevant critical success factors (CSFs) for a successful dispensing barcode system implementation. Twenty-eight pharmacists from a local hospital in Saudi Arabia were interviewed to obtain their perception of these CSFs. In this study, planning (process flow issues and training requirements), resistance (fear of change, communication issues, and negative perceptions about technology), and technology (software, hardware, and vendor support) were identified as the main barriers. The analytic hierarchy process (AHP), one of the most widely used tools for decision making in the presence of multiple criteria, was used to compare and rank these identified CSFs. The results of this study suggest that resistance barriers have a greater impact than planning and technology barriers. In particular, fear of change is the most critical factor, and training is the least critical factor.

POD/DEIM reduced-order strategies for efficient four dimensional variational data assimilation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ştefănescu, R., E-mail: rstefane@vt.edu; Sandu, A., E-mail: sandu@cs.vt.edu; Navon, I.M., E-mail: inavon@fsu.edu

2015-08-15

This work studies reduced order modeling (ROM) approaches to speed up the solution of variational data assimilation problems with large scale nonlinear dynamical models. It is shown that a key requirement for a successful reduced order solution is that reduced order Karush–Kuhn–Tucker conditions accurately represent their full order counterparts. In particular, accurate reduced order approximations are needed for the forward and adjoint dynamical models, as well as for the reduced gradient. New strategies to construct reduced order based are developed for proper orthogonal decomposition (POD) ROM data assimilation using both Galerkin and Petrov–Galerkin projections. For the first time POD, tensorialmore » POD, and discrete empirical interpolation method (DEIM) are employed to develop reduced data assimilation systems for a geophysical flow model, namely, the two dimensional shallow water equations. Numerical experiments confirm the theoretical framework for Galerkin projection. In the case of Petrov–Galerkin projection, stabilization strategies must be considered for the reduced order models. The new reduced order shallow water data assimilation system provides analyses similar to those produced by the full resolution data assimilation system in one tenth of the computational time.« less

Methods for Linking Community Views to Measureable Outcomes in a Youth Violence Prevention Program

PubMed Central

McDonald, Catherine C.; Richmond, Therese S.; Guerra, Terry; Thomas, Nicole A.; Walker, Alia; Branas, Charles C.; TenHave, Thomas R.; Vaughn, Nicole A.; Leff, Stephen S.; Hausman, Alice J.

2013-01-01

Background All parties in community–academic partnerships have a vested interest prevention program success. Markers of success that reflect community’s experiences of programmatic prevention success are not always measurable, but critically speak to community-defined needs. Objective The purpose of this manuscript was to (1) describe our systematic process for linking locally relevant community views (community-defined indicators) to measurable outcomes in the context of a youth violence prevention program and (2) discuss lessons learned, next steps, and recommendations for others trying to replicate a similar process. Methods A research team composed of both academic and community researchers conducted a systematic process of matching community-defined indicators of youth violence prevention programmatic success to standardized youth survey items being administered in the course of a program evaluation. The research team of three community partners and Five academic partners considered 43 community-defined indicators and 208 items from the youth surveys being utilized within the context of a community-based aggression prevention program. At the end of the matching process, 92 youth survey items were identified and agreed upon as potential matches to 11 of the community-defined indicators. Conclusions We applied rigorous action steps to match community-defined indicators to survey data collected in the youth violence prevention intervention. We learned important lessons that inform recommendations for others interested in such endeavors. The process used to derive and assess community-defined indicators of success emphasized the principles of community-based participatory research (CBPR) and use of existing and available data to reduce participant burden. PMID:23221296

Bioelectrical impedance analysis: A new tool for assessing fish condition

USGS Publications Warehouse

Hartman, Kyle J.; Margraf, F. Joseph; Hafs, Andrew W.; Cox, M. Keith

2015-01-01

Bioelectrical impedance analysis (BIA) is commonly used in human health and nutrition fields but has only recently been considered as a potential tool for assessing fish condition. Once BIA is calibrated, it estimates fat/moisture levels and energy content without the need to kill fish. Despite the promise held by BIA, published studies have been divided on whether BIA can provide accurate estimates of body composition in fish. In cases where BIA was not successful, the models lacked the range of fat levels or sample sizes we determined were needed for model success (range of dry fat levels of 29%, n = 60, yielding an R2 of 0.8). Reduced range of fat levels requires an increased sample size to achieve that benchmark; therefore, standardization of methods is needed. Here we discuss standardized methods based on a decade of research, identify sources of error, discuss where BIA is headed, and suggest areas for future research.

A synergistic approach to protein crystallization: Combination of a fixed-arm carrier with surface entropy reduction

PubMed Central

Moon, Andrea F; Mueller, Geoffrey A; Zhong, Xuejun; Pedersen, Lars C

2010-01-01

Protein crystallographers are often confronted with recalcitrant proteins not readily crystallizable, or which crystallize in problematic forms. A variety of techniques have been used to surmount such obstacles: crystallization using carrier proteins or antibody complexes, chemical modification, surface entropy reduction, proteolytic digestion, and additive screening. Here we present a synergistic approach for successful crystallization of proteins that do not form diffraction quality crystals using conventional methods. This approach combines favorable aspects of carrier-driven crystallization with surface entropy reduction. We have generated a series of maltose binding protein (MBP) fusion constructs containing different surface mutations designed to reduce surface entropy and encourage crystal lattice formation. The MBP advantageously increases protein expression and solubility, and provides a streamlined purification protocol. Using this technique, we have successfully solved the structures of three unrelated proteins that were previously unattainable. This crystallization technique represents a valuable rescue strategy for protein structure solution when conventional methods fail. PMID:20196072

[New prospects in physician-patient communication: role of the animated model].

PubMed

Binetti, P; Meloni, M C; Denaro, V

2003-01-01

Today information technology and multimediality play a key role in the field of medicine and only recently have been used to improve the doctor-patient relationship. The authors propose the use of induction movies also in this field improving communication between doctor and patient especially when handling surgical operations and complex procedures. These movies give detailed information to patients showing images and explaining in a simple way surgery, therapy and innovative procedures helping the patients to cope with surgery and therapy reducing anxiety and worry. This innovative method was also used successfully for the training of students helping them to understand important issues. An induction movie on CD regarding two different surgical techniques was shown to 20 patients (7 females and 13 males, average age 50.8), 20 doctors and 20 students. Doctors and patients appreciated this new communication method enabling doctors to better communicate with patients and patients to better understand operation procedures. Worry for operation was reduced and compliance before and after surgery was increased. As to the notion point of view students understood quicker and easier. This method is innovative and enables technical information to reach patients, doctors and students faster. Images are kept in mind easier and help patients to evaluate the pros and cons of surgery reducing worry. There was more communication between doctors and patients improving therefore their relationship and at the same time reducing communication barriers.

Using milk fat to reduce the irritation and bitter taste of ibuprofen

PubMed Central

Bennett, Samantha M.; Zhou, Lisa; Hayes, John E.

2012-01-01

Bitterness and irritation elicited by pharmaceutically active molecules remain problematic for pediatric medications, fortified foods and dietary supplements. Few effective methods exist for reducing these unpalatable sensations, negatively impacting medication compliance and intake of beneficial phytonutrients. A physicochemical approach to masking these sensations may be the most successful approach for generalizability to a wide range of structurally and functionally unique compounds. Here, solutions of the non-steroidal anti- inflammatory drug, ibuprofen, were prepared in milk products with varying fat content. Our hypothesis, based on other reports of similar phenomena, was that increasing the fat content would cause ibuprofen to selectively partition into the fat phase, thereby reducing interaction with sensory receptors and decreasing adversive sensations. Quantification of the aqueous concentration of ibuprofen was performed using an isocratic HPLC method coupled with an external standard curve. Sensory testing showed a modest but significant decrease (~20%) in irritation ratings between the skim milk (0% fat) and the half-and-half (11% fat) samples, indicating that increased fat may contribute to a reduced sensory response. Bitterness was not reduced, remaining constant over all fat levels. The HPLC results indicate a constant amount of ibuprofen remained in the aqueous phase regardless of fat level, so a simple partitioning hypothesis cannot explain the reduced irritancy ratings. Association of ionized ibuprofen with continuous phase solutes such as unabsorbed protein should be explored in future work. PMID:23527314

Study on validation method for femur finite element model under multiple loading conditions

NASA Astrophysics Data System (ADS)

Guan, Fengjiao; Zhang, Guanjun; Liu, Jie; Wang, Shujing; Luo, Xu

2018-03-01

Acquisition of accurate and reliable constitutive parameters related to bio-tissue materials was beneficial to improve biological fidelity of a Finite Element (FE) model and predict impact damages more effectively. In this paper, a femur FE model was established under multiple loading conditions with diverse impact positions. Then, based on sequential response surface method and genetic algorithms, the material parameters identification was transformed to a multi-response optimization problem. Finally, the simulation results successfully coincided with force-displacement curves obtained by numerous experiments. Thus, computational accuracy and efficiency of the entire inverse calculation process were enhanced. This method was able to effectively reduce the computation time in the inverse process of material parameters. Meanwhile, the material parameters obtained by the proposed method achieved higher accuracy.

Genetic shifting: a novel approach for controlling vector-borne diseases.

PubMed

Powell, Jeffrey R; Tabachnick, Walter J

2014-06-01

Rendering populations of vectors of diseases incapable of transmitting pathogens through genetic methods has long been a goal of vector geneticists. We outline a method to achieve this goal that does not involve the introduction of any new genetic variants to the target population. Rather we propose that shifting the frequencies of naturally occurring alleles that confer refractoriness to transmission can reduce transmission below a sustainable level. The program employs methods successfully used in plant and animal breeding. Because no artificially constructed genetically modified organisms (GMOs) are introduced into the environment, the method is minimally controversial. We use Aedes aegypti and dengue virus (DENV) for illustrative purposes but point out that the proposed program is generally applicable to vector-borne disease control. Copyright © 2014 Elsevier Ltd. All rights reserved.

In middle-aged and old obese patients, training intervention reduces leptin level: A meta-analysis

PubMed Central

Rostás, Ildikó; Pótó, László; Mátrai, Péter; Hegyi, Péter; Tenk, Judit; Garami, András; Illés, Anita; Solymár, Margit; Pétervári, Erika; Szűcs, Ákos; Párniczky, Andrea; Pécsi, Dániel; Rumbus, Zoltán; Zsiborás, Csaba; Füredi, Nóra; Balaskó, Márta

2017-01-01

Background Leptin is one of the major adipokines in obesity that indicates the severity of fat accumulation. It is also an important etiological factor of consequent cardiometabolic and autoimmune disorders. Aging has been demonstrated to aggravate obesity and to induce leptin resistance and hyperleptinemia. Hyperleptinemia, on the other hand, may promote the development of age-related abnormalities. While major weight loss has been demonstrated to ameliorate hyperleptinemia, obese people show a poor tendency to achieve lasting success in this field. The question arises whether training intervention per se is able to reduce the level of this adipokine. Objectives We aimed to review the literature on the effects of training intervention on peripheral leptin level in obesity during aging, in order to evaluate the independent efficacy of this method. In the studies that were included in our analysis, changes of adiponectin levels (when present) were also evaluated. Data sources 3481 records were identified through searching of PubMed, Embase and Cochrane Library Database. Altogether 19 articles were suitable for analyses. Study eligibility criteria Empirical research papers were eligible provided that they reported data of middle-aged or older (above 45 years of age) overweight or obese (body mass index above 25) individuals and included physical training intervention or at least fitness status of groups together with corresponding blood leptin values. Statistical methods We used random effect models in each of the meta-analyses calculating with the DerSimonian and Laird weighting methods. I-squared indicator and Q test were performed to assess heterogeneity. To assess publication bias Egger’s test was applied. In case of significant publication bias, the Duval and Tweedie's trim and fill algorithm was used. Results Training intervention leads to a decrease in leptin level of middle-aged or older, overweight or obese male and female groups, even without major weight loss, indicated by unchanged serum adiponectin levels. Resistance training appears to be more efficient in reducing blood leptin level than aerobic training alone. Conclusions Physical training, especially resistance training successfully reduces hyperleptinemia even without diet or major weight loss. PMID:28809927

Advanced composites characterization with x-ray technologies

NASA Astrophysics Data System (ADS)

Baaklini, George Y.

1993-12-01

Recognizing the critical need to advance new composites for the aeronautics and aerospace industries, we are focussing on advanced test methods that are vital to successful modeling and manufacturing of future generations of high temperature and durable composite materials. These newly developed composites are necessary to reduce propulsion cost and weight, to improve performance and reliability, and to address longer-term national strategic thrusts for sustaining global preeminence in high speed air transport and in high performance military aircraft.

Metal-induced streak artifact reduction using iterative reconstruction algorithms in x-ray computed tomography image of the dentoalveolar region.

PubMed

Dong, Jian; Hayakawa, Yoshihiko; Kannenberg, Sven; Kober, Cornelia

2013-02-01

The objective of this study was to reduce metal-induced streak artifact on oral and maxillofacial x-ray computed tomography (CT) images by developing the fast statistical image reconstruction system using iterative reconstruction algorithms. Adjacent CT images often depict similar anatomical structures in thin slices. So, first, images were reconstructed using the same projection data of an artifact-free image. Second, images were processed by the successive iterative restoration method where projection data were generated from reconstructed image in sequence. Besides the maximum likelihood-expectation maximization algorithm, the ordered subset-expectation maximization algorithm (OS-EM) was examined. Also, small region of interest (ROI) setting and reverse processing were applied for improving performance. Both algorithms reduced artifacts instead of slightly decreasing gray levels. The OS-EM and small ROI reduced the processing duration without apparent detriments. Sequential and reverse processing did not show apparent effects. Two alternatives in iterative reconstruction methods were effective for artifact reduction. The OS-EM algorithm and small ROI setting improved the performance. Copyright © 2012 Elsevier Inc. All rights reserved.

Novel Automated Blood Separations Validate Whole Cell Biomarkers

PubMed Central

Burger, Douglas E.; Wang, Limei; Ban, Liqin; Okubo, Yoshiaki; Kühtreiber, Willem M.; Leichliter, Ashley K.; Faustman, Denise L.

2011-01-01

Background Progress in clinical trials in infectious disease, autoimmunity, and cancer is stymied by a dearth of successful whole cell biomarkers for peripheral blood lymphocytes (PBLs). Successful biomarkers could help to track drug effects at early time points in clinical trials to prevent costly trial failures late in development. One major obstacle is the inaccuracy of Ficoll density centrifugation, the decades-old method of separating PBLs from the abundant red blood cells (RBCs) of fresh blood samples. Methods and Findings To replace the Ficoll method, we developed and studied a novel blood-based magnetic separation method. The magnetic method strikingly surpassed Ficoll in viability, purity and yield of PBLs. To reduce labor, we developed an automated platform and compared two magnet configurations for cell separations. These more accurate and labor-saving magnet configurations allowed the lymphocytes to be tested in bioassays for rare antigen-specific T cells. The automated method succeeded at identifying 79% of patients with the rare PBLs of interest as compared with Ficoll's uniform failure. We validated improved upfront blood processing and show accurate detection of rare antigen-specific lymphocytes. Conclusions Improving, automating and standardizing lymphocyte detections from whole blood may facilitate development of new cell-based biomarkers for human diseases. Improved upfront blood processes may lead to broad improvements in monitoring early trial outcome measurements in human clinical trials. PMID:21799852

A technique for the reduction of banding in Landsat Thematic Mapper Images

USGS Publications Warehouse

Helder, Dennis L.; Quirk, Bruce K.; Hood, Joy J.

1992-01-01

The radiometric difference between forward and reverse scans in Landsat thematic mapper (TM) images, referred to as "banding," can create problems when enhancing the image for interpretation or when performing quantitative studies. Recent research has led to the development of a method that reduces the banding in Landsat TM data sets. It involves passing a one-dimensional spatial kernel over the data set. This kernel is developed from the statistics of the banding pattern and is based on the Wiener filter. It has been implemented on both a DOS-based microcomputer and several UNIX-based computer systems. The algorithm has successfully reduced the banding in several test data sets.

Safety evaluation methodology for advanced coal extraction systems

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.

1981-01-01

Qualitative and quantitative evaluation methods for coal extraction systems were developed. The analysis examines the soundness of the design, whether or not the major hazards have been eliminated or reduced, and how the reduction would be accomplished. The quantitative methodology establishes the approximate impact of hazards on injury levels. The results are weighted by peculiar geological elements, specialized safety training, peculiar mine environmental aspects, and reductions in labor force. The outcome is compared with injury level requirements based on similar, safer industries to get a measure of the new system's success in reducing injuries. This approach provides a more detailed and comprehensive analysis of hazards and their effects than existing safety analyses.

Long-term efficacy of single procedure remote magnetic catheter navigation for ablation of ischemic ventricular tachycardia: a retrospective study.

PubMed

Dinov, Borislav; Schönbauer, Robert; Wojdyla-Hordynska, Agnieska; Braunschweig, Frieder; Richter, Sergio; Altmann, David; Sommer, Philipp; Gaspar, Thomas; Bollmann, Andreas; Wetzel, Ulrike; Rolf, Sascha; Piorkowski, Christopher; Hindricks, Gerhard; Arya, Arash

2012-05-01

Remote magnetic navigation (RMN) aims to reduce some inherent limitations of manual radiofrequency (RF) ablation. However, data comparing the effectiveness of both methods are scarce. This study evaluated the acute and long-term success of RMN guided versus manual RF ablation in patients with ischemic sustained ventricular tachycardia (sVT). One hundred two consecutive patients (age 68 ± 10 years, LVEF 32 ± 12%, 88 men) with ischemic sVT were ablated with RMN (Stereotaxis; 49%) or manually (51%) using substrate and/or activation mapping (Carto) and open-irrigated-tip catheters. All received implantable defibrillators or loop recorders. Acute success was defined as noninducibility of any sVT at the end of the ablation procedure and long-term success as freedom from VT upon follow-up. There was no difference in the baseline characteristics between the groups. Three patients died in hospital. Acute success rate was similar for RMN and manual ablation (82% vs 71%, P = 0.246). RMN was associated with significantly shorter fluoroscopy time (13 ± 12 minutes vs 32 ± 17 minutes, P = 0.0001) and RF time (2337.59 ± 1248.22 seconds vs 1589.95 ± 1047.42 seconds, P = 0.049), although total procedure time was similar (157 ± 40 minutes vs 148 ± 50 minutes, P = 0.42). There was a nonsignificant trend toward better long-term success in RMN group: after a median of 13 (range 1-34) months, 63% in the RMN and 53% in the manual ablation group were free from VT recurrence (P = 0.206). RMN guided RF ablation of ischemic sustained VT is equally efficient compared with manual ablation in terms of acute and long-term success rate. These results are achieved with a significantly reduced fluoroscopy time and shorter RF time. © 2012 Wiley Periodicals, Inc.

High Performance Implementation of 3D Convolutional Neural Networks on a GPU.

PubMed

Lan, Qiang; Wang, Zelong; Wen, Mei; Zhang, Chunyuan; Wang, Yijie

2017-01-01

Convolutional neural networks have proven to be highly successful in applications such as image classification, object tracking, and many other tasks based on 2D inputs. Recently, researchers have started to apply convolutional neural networks to video classification, which constitutes a 3D input and requires far larger amounts of memory and much more computation. FFT based methods can reduce the amount of computation, but this generally comes at the cost of an increased memory requirement. On the other hand, the Winograd Minimal Filtering Algorithm (WMFA) can reduce the number of operations required and thus can speed up the computation, without increasing the required memory. This strategy was shown to be successful for 2D neural networks. We implement the algorithm for 3D convolutional neural networks and apply it to a popular 3D convolutional neural network which is used to classify videos and compare it to cuDNN. For our highly optimized implementation of the algorithm, we observe a twofold speedup for most of the 3D convolution layers of our test network compared to the cuDNN version.

High Performance Implementation of 3D Convolutional Neural Networks on a GPU

PubMed Central

Wang, Zelong; Wen, Mei; Zhang, Chunyuan; Wang, Yijie

2017-01-01

Convolutional neural networks have proven to be highly successful in applications such as image classification, object tracking, and many other tasks based on 2D inputs. Recently, researchers have started to apply convolutional neural networks to video classification, which constitutes a 3D input and requires far larger amounts of memory and much more computation. FFT based methods can reduce the amount of computation, but this generally comes at the cost of an increased memory requirement. On the other hand, the Winograd Minimal Filtering Algorithm (WMFA) can reduce the number of operations required and thus can speed up the computation, without increasing the required memory. This strategy was shown to be successful for 2D neural networks. We implement the algorithm for 3D convolutional neural networks and apply it to a popular 3D convolutional neural network which is used to classify videos and compare it to cuDNN. For our highly optimized implementation of the algorithm, we observe a twofold speedup for most of the 3D convolution layers of our test network compared to the cuDNN version. PMID:29250109

Implementing Small-Group Instruction: Insights from Successful Practitioners.

ERIC Educational Resources Information Center

Cooper, James L.; MacGregor, Jean; Smith, Karl A.; Robinson, Pamela

2000-01-01

College faculty who have successfully implemented small-group instruction address common concerns such as: reduced content coverage, reduced amount of learning, need for prerequisite learning, importance of solitary learning, colleagues' concerns, student resistance, logistics, evaluation, use of teaching assistants, and time requirements. (DB)

Self-perceived successful weight regulators are less affected by self-regulatory depletion in the domain of eating behavior.

PubMed

Friese, Malte; Engeler, Michèle; Florack, Arnd

2015-01-01

Weight loss and maintenance goals are highly prevalent in many affluent societies, but many weight regulators are not successful in the long term. Research started to reveal psychological mechanisms that help successful weight regulators in being successful. In the present study, we tested the assumption that these mechanisms facilitate successful self-regulation particularly under conditions of self-regulatory depletion. Participants exerted or did not exert self-control in a first task before engaging in a taste test of a tempting but unhealthy food. Participants who had initially exerted self-control ate more than participants in the control condition. This effect was reduced in self-perceived successful weight regulators as compared to perceived unsuccessful self-regulators. A reduced susceptibility to self-regulatory depletion may be an important contributor to long-term weight regulation success in successful weight regulators. Copyright © 2014 Elsevier Ltd. All rights reserved.

A theoretical study in extracting the essential features and dynamics of molecular motions: Intrinsic geometry methods for PF(5) pseudorotations and statistical methods for argon clusters

NASA Astrophysics Data System (ADS)

Panahi, Nima S.

We studied the problem of understanding and computing the essential features and dynamics of molecular motions through the development of two theories for two different systems. First, we studied the process of the Berry Pseudorotation of PF5 and the rotations it induces in the molecule through its natural and intrinsic geometric nature by setting it in the language of fiber bundles and graph theory. With these tools, we successfully extracted the essentials of the process' loops and induced rotations. The infinite number of pseudorotation loops were broken down into a small set of essential loops called "super loops", with their intrinsic properties and link to the physical movements of the molecule extensively studied. In addition, only the three "self-edge loops" generated any induced rotations, and then only a finite number of classes of them. Second, we studied applying the statistical methods of Principal Components Analysis (PCA) and Principal Coordinate Analysis (PCO) to capture only the most important changes in Argon clusters so as to reduce computational costs and graph the potential energy surface (PES) in three dimensions respectively. Both methods proved successful, but PCA was only partially successful since one will only see advantages for PES database systems much larger than those both currently being studied and those that can be computationally studied in the next few decades to come. In addition, PCA is only needed for the very rare case of a PES database that does not already include Hessian eigenvalues.

An algorithm for spatial heirarchy clustering

NASA Technical Reports Server (NTRS)

Dejesusparada, N. (Principal Investigator); Velasco, F. R. D.

1981-01-01

A method for utilizing both spectral and spatial redundancy in compacting and preclassifying images is presented. In multispectral satellite images, a high correlation exists between neighboring image points which tend to occupy dense and restricted regions of the feature space. The image is divided into windows of the same size where the clustering is made. The classes obtained in several neighboring windows are clustered, and then again successively clustered until only one region corresponding to the whole image is obtained. By employing this algorithm only a few points are considered in each clustering, thus reducing computational effort. The method is illustrated as applied to LANDSAT images.

Pattern recognition invariant under changes of scale and orientation

NASA Astrophysics Data System (ADS)

Arsenault, Henri H.; Parent, Sebastien; Moisan, Sylvain

1997-08-01

We have used a modified method proposed by neiberg and Casasent to successfully classify five kinds of military vehicles. The method uses a wedge filter to achieve scale invariance, and lines in a multi-dimensional feature space correspond to each target with out-of-plane orientations over 360 degrees around a vertical axis. The images were not binarized, but were filtered in a preprocessing step to reduce aliasing. The feature vectors were normalized and orthogonalized by means of a neural network. Out-of-plane rotations of 360 degrees and scale changes of a factor of four were considered. Error-free classification was achieved.

Emergency treatment of exertional heatstroke and comparison of whole body cooling techniques.

PubMed

Costrini, A

1990-02-01

This manuscript compares the whole body cooling techniques in the emergency treatment of heatstroke. Historically, the use of cold water immersion with skin massage has been quite successful in rapidly lowering body temperature and in avoiding severe complications or death. Recent studies have suggested alternative therapies, including the use of a warm air spray, the use of helicopter downdraft, and pharmacological agents. While evidence exists to support these methods, they have not been shown to reduce fatalities as effectively as ice water immersion. Although several cooling methods may have clinical use, all techniques rely on the prompt recognition of symptoms and immediate action in the field.

Stress evaluation in displacement-based 2D nonlocal finite element method

NASA Astrophysics Data System (ADS)

Pisano, Aurora Angela; Fuschi, Paolo

2018-06-01

The evaluation of the stress field within a nonlocal version of the displacement-based finite element method is addressed. With the aid of two numerical examples it is shown as some spurious oscillations of the computed nonlocal stresses arise at sections (or zones) of macroscopic inhomogeneity of the examined structures. It is also shown how the above drawback, which renders the stress numerical solution unreliable, can be viewed as the so-called locking in FEM, a subject debated in the early seventies. It is proved that a well known remedy for locking, i.e. the reduced integration technique, can be successfully applied also in the nonlocal elasticity context.

Passive Acoustic Detection of Wind Turbine In-Flow Conditions for Active Control and Optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murray, Nathan E.

2012-03-12

Wind is a significant source of energy; however, the human capability to produce electrical energy still has many hurdles to overcome. One of these is the unpredictability of the winds in the atmospheric boundary layer (ABL). The ABL is highly turbulent in both stable and unstable conditions (based on the vertical temperature profile) and the resulting fluctuations can have a dramatic impact on wind turbine operation. Any method by which these fluctuations could be observed, estimated, or predicted could provide a benefit to the wind energy industry as a whole. Based on the fundamental coupling of velocity fluctuations to pressuremore » fluctuations in the nearly incompressible flow in the ABL, This work hypothesizes that a ground-based array of infrasonic pressure transducers could be employed to estimate the vertical wind profile over a height relevant for wind turbines. To analyze this hypothesis, experiments and field deployments were conducted. Wind tunnel experiments were performed for a thick turbulent boundary layer over a neutral or heated surface. Surface pressure and velocity probe measurements were acquired simultaneously. Two field deployments yielded surface pressure data from a 49 element array. The second deployment at the Reese Technology Center in Lubbock, TX, also included data from a smaller aperture, 96-element array and a 200-meter tall meteorological tower. Analysis of the data successfully demonstrated the ability to estimate the vertical velocity profile using coherence data from the pressure array. Also, dynamical systems analysis methods were successful in identifying and tracking a gust type event. In addition to the passive acoustic profiling method, this program also investigated a rapid response Doppler SODAR system, the optimization of wind turbine blades for enhanced power with reduced aeroacoustic noise production, and the implementation of a wireless health monitoring system for the wind turbine blades. Each of these other objectives was met successfully. The use of phase unwrapping applied to SODAR data was found to yield reasonable results for per-pulse measurements. A health monitoring system design analysis was able to demonstrate the ability to use a very small number of sensors to monitor blade health based on the blade's overall structural modes. Most notable was the development of a multi-objective optimization methodology that successfully yielded an aerodynamic blade design that produces greater power output with reduced aerodynamic loading noise. This optimization method could be significant for future design work.« less

Control of collective network chaos.

PubMed

Wagemakers, Alexandre; Barreto, Ernest; Sanjuán, Miguel A F; So, Paul

2014-06-01

Under certain conditions, the collective behavior of a large globally-coupled heterogeneous network of coupled oscillators, as quantified by the macroscopic mean field or order parameter, can exhibit low-dimensional chaotic behavior. Recent advances describe how a small set of "reduced" ordinary differential equations can be derived that captures this mean field behavior. Here, we show that chaos control algorithms designed using the reduced equations can be successfully applied to imperfect realizations of the full network. To systematically study the effectiveness of this technique, we measure the quality of control as we relax conditions that are required for the strict accuracy of the reduced equations, and hence, the controller. Although the effects are network-dependent, we show that the method is effective for surprisingly small networks, for modest departures from global coupling, and even with mild inaccuracy in the estimate of network heterogeneity.

Comparison between two methods of scorpion venom milking in Morocco

PubMed Central

2013-01-01

Background The present study compared two methods used successfully in a large-scale program for the collection of scorpion venoms, namely the milking of adult scorpions via manual and electrical stimulation. Results Our immunobiochemical characterizations clearly demonstrate that regularly applied electrical stimulation obtains scorpion venom more easily and, most importantly, in greater quantity. Qualitatively, the electrically collected venom showed lack of hemolymph contaminants such as hemocyanin. In contrast, manual obtainment of venom subjects scorpions to maximal trauma, leading to hemocyanin secretion. Our study highlighted the importance of reducing scorpion trauma during venom milking. Conclusions In conclusion, to produce high quality antivenom with specific antibodies, it is necessary to collect venom by the gentler electrical stimulation method. PMID:23849043

An evaluation of technologies for the heavy metal remediation of dredged sediments.

PubMed

Mulligan, C N; Yong, R N; Gibbs, B F

2001-07-30

Sediments dewatering is frequently necessary after dredging to remediate and treat contaminants. Methods include draining of the water in lagoons with or without coagulants and flocculants, or using presses or centrifuges. Treatment methods are similar to those used for soil and include pretreatment, physical separation, thermal processes, biological decontamination, stabilization/solidification and washing. However, compared to soil treatment, few remediation techniques have been commercially used for sediments. In this paper, a review of the methods that have been used and an evaluation of developed and developing technologies is made. Sequential extraction technique can be a useful tool for determining metal speciation before and after washing. Solidification/stabilization techniques are successful but significant monitoring is required, since the solidification process can be reversible. In addition, the presence of organics can reduce treatment efficiency. Vitrification is applicable for sediments but expensive. Only if a useful glass product can be sold will this process be economically viable. Thermal processes are only applicable for removal of volatile metals, such as mercury and costs are high. Biological processes are under development and have the potential to be low cost. Since few low cost metal treatment processes for sediments are available, there exists significant demand for further development. Pretreatment may be one of the methods that can reduce costs by reducing the volumes of sediments that need to be treated.

Reduced-cost second-order algebraic-diagrammatic construction method for excitation energies and transition moments

NASA Astrophysics Data System (ADS)

Mester, Dávid; Nagy, Péter R.; Kállay, Mihály

2018-03-01

A reduced-cost implementation of the second-order algebraic-diagrammatic construction [ADC(2)] method is presented. We introduce approximations by restricting virtual natural orbitals and natural auxiliary functions, which results, on average, in more than an order of magnitude speedup compared to conventional, density-fitting ADC(2) algorithms. The present scheme is the successor of our previous approach [D. Mester, P. R. Nagy, and M. Kállay, J. Chem. Phys. 146, 194102 (2017)], which has been successfully applied to obtain singlet excitation energies with the linear-response second-order coupled-cluster singles and doubles model. Here we report further methodological improvements and the extension of the method to compute singlet and triplet ADC(2) excitation energies and transition moments. The various approximations are carefully benchmarked, and conservative truncation thresholds are selected which guarantee errors much smaller than the intrinsic error of the ADC(2) method. Using the canonical values as reference, we find that the mean absolute error for both singlet and triplet ADC(2) excitation energies is 0.02 eV, while that for oscillator strengths is 0.001 a.u. The rigorous cutoff parameters together with the significantly reduced operation count and storage requirements allow us to obtain accurate ADC(2) excitation energies and transition properties using triple-ζ basis sets for systems of up to one hundred atoms.

Factors Influencing the Effectiveness of Glucagon for Preventing Hypoglycemia

PubMed Central

Castle, Jessica R; Engle, Julia M; El Youssef, Joseph; Massoud, Ryan G; Ward, W Kenneth

2010-01-01

Background Administration of small, intermittent doses of glucagon during closed-loop insulin delivery markedly reduces the frequency of hypoglycemia. However, in some cases, hypoglycemia occurs despite administration of glucagon in this setting. Methods Fourteen adult subjects with type 1 diabetes participated in 22 closed-loop studies, duration 21.5 ± 2.0 h. The majority of subjects completed two studies, one with insulin + glucagon, given subcutaneously by algorithm during impending hypoglycemia, and one with insulin + placebo. The more accurate of two subcutaneous glucose sensors was used as the controller input. To better understand reasons for success or failure of glucagon to prevent hypoglycemia, each response to a glucagon dose over 0.5 µg/kg was analyzed (n = 19 episodes). Results Hypoglycemia occurred in the hour after glucagon delivery in 37% of these episodes. In the failures, estimated insulin on board was significantly higher versus successes (5.8 ± 0.5 versus 2.9 ± 0.5 U, p < .001). Glucose at the time of glucagon delivery was significantly lower in failures versus successes (86 ± 3 versus 95 ± 3 mg/dl, p = .04). Sensor bias (glucose overestimation) was highly correlated with starting glucose (r = 0.65, p = .002). Prior cumulative glucagon dose was not associated with success or failure. Conclusion Glucagon may fail to prevent hypoglycemia when insulin on board is high or when glucagon delivery is delayed due to overestimation of glucose by the sensor. Improvements in sensor accuracy and delivery of larger or earlier glucagon doses when insulin on board is high may further reduce the frequency of hypoglycemia. PMID:21129324

The successful merger of theoretical thermochemistry with fragment-based methods in quantum chemistry.

PubMed

Ramabhadran, Raghunath O; Raghavachari, Krishnan

2014-12-16

CONSPECTUS: Quantum chemistry and electronic structure theory have proven to be essential tools to the experimental chemist, in terms of both a priori predictions that pave the way for designing new experiments and rationalizing experimental observations a posteriori. Translating the well-established success of electronic structure theory in obtaining the structures and energies of small chemical systems to increasingly larger molecules is an exciting and ongoing central theme of research in quantum chemistry. However, the prohibitive computational scaling of highly accurate ab initio electronic structure methods poses a fundamental challenge to this research endeavor. This scenario necessitates an indirect fragment-based approach wherein a large molecule is divided into small fragments and is subsequently reassembled to compute its energy accurately. In our quest to further reduce the computational expense associated with the fragment-based methods and overall enhance the applicability of electronic structure methods to large molecules, we realized that the broad ideas involved in a different area, theoretical thermochemistry, are transferable to the area of fragment-based methods. This Account focuses on the effective merger of these two disparate frontiers in quantum chemistry and how new concepts inspired by theoretical thermochemistry significantly reduce the total number of electronic structure calculations needed to be performed as part of a fragment-based method without any appreciable loss of accuracy. Throughout, the generalized connectivity based hierarchy (CBH), which we developed to solve a long-standing problem in theoretical thermochemistry, serves as the linchpin in this merger. The accuracy of our method is based on two strong foundations: (a) the apt utilization of systematic and sophisticated error-canceling schemes via CBH that result in an optimal cutting scheme at any given level of fragmentation and (b) the use of a less expensive second layer of electronic structure method to recover all the missing long-range interactions in the parent large molecule. Overall, the work featured here dramatically decreases the computational expense and empowers the execution of very accurate ab initio calculations (gold-standard CCSD(T)) on large molecules and thereby facilitates sophisticated electronic structure applications to a wide range of important chemical problems.

Adapting and Implementing a Community Program to Improve Retention in Care among Patients with HIV in Southern Haiti: "Group of 6".

PubMed

Naslund, John A; Dionne-Odom, Jodie; Junior Destiné, Cléonas; Jogerst, Kristen M; Renold Sénécharles, Redouin; Jean Louis, Michelande; Desir, Jasmin; Néptune Ledan, Yvette; Beauséjour, Jude Ronald; Charles, Roland; Werbel, Alice; Talbot, Elizabeth A; Joseph, Patrice; Pape, Jean William; Wright, Peter F

2014-01-01

Objective. In Mozambique, a patient-led Community ART Group model developed by Médecins Sans Frontières improved retention in care and adherence to antiretroviral therapy (ART) among persons with HIV. We describe the adaptation and implementation of this model within the HIV clinic located in the largest public hospital in Haiti's Southern Department. Methods. Our adapted model was named Group of 6. Hospital staff enabled stable patients with HIV receiving ART to form community groups with 4-6 members to facilitate monthly ART distribution, track progress and adherence, and provide support. Implementation outcomes included recruitment success, participant retention, group completion of monthly monitoring forms, and satisfaction surveys. Results. Over one year, 80 patients from nine communities enrolled into 15 groups. Six participants left to receive HIV care elsewhere, two moved away, and one died of a non-HIV condition. Group members successfully completed monthly ART distribution and returned 85.6% of the monthly monitoring forms. Members reported that Group of 6 made their HIV management easier and hospital staff reported that it reduced their workload. Conclusions. We report successful adaptation and implementation of a validated community HIV-care model in Southern Haiti. Group of 6 can reduce barriers to ART adherence, and will be integrated as a routine care option.

Publication bias and the failure of replication in experimental psychology.

PubMed

Francis, Gregory

2012-12-01

Replication of empirical findings plays a fundamental role in science. Among experimental psychologists, successful replication enhances belief in a finding, while a failure to replicate is often interpreted to mean that one of the experiments is flawed. This view is wrong. Because experimental psychology uses statistics, empirical findings should appear with predictable probabilities. In a misguided effort to demonstrate successful replication of empirical findings and avoid failures to replicate, experimental psychologists sometimes report too many positive results. Rather than strengthen confidence in an effect, too much successful replication actually indicates publication bias, which invalidates entire sets of experimental findings. Researchers cannot judge the validity of a set of biased experiments because the experiment set may consist entirely of type I errors. This article shows how an investigation of the effect sizes from reported experiments can test for publication bias by looking for too much successful replication. Simulated experiments demonstrate that the publication bias test is able to discriminate biased experiment sets from unbiased experiment sets, but it is conservative about reporting bias. The test is then applied to several studies of prominent phenomena that highlight how publication bias contaminates some findings in experimental psychology. Additional simulated experiments demonstrate that using Bayesian methods of data analysis can reduce (and in some cases, eliminate) the occurrence of publication bias. Such methods should be part of a systematic process to remove publication bias from experimental psychology and reinstate the important role of replication as a final arbiter of scientific findings.

Molecular mechanism of plasma sterilization in solution with the reduced pH method: importance of permeation of HOO radicals into the cell membrane

NASA Astrophysics Data System (ADS)

Takai, Eisuke; Ikawa, Satoshi; Kitano, Katsuhisa; Kuwabara, Junpei; Shiraki, Kentaro

2013-07-01

Sterilization of certain infected areas of the human body surface is necessary for dental and surgical therapies. Because the blood is filled with body fluid, sterilization in solution is essential. In vitro solution sterilization has been successively carried out using a combination of low-temperature atmospheric-pressure plasma and the reduced pH method, where the solution is sufficiently acidic. Here, we show the molecular mechanism of such plasma sterilization in solution based on microbiology. Three kinds of bacteria were inactivated by plasma treatment under various pH conditions. The theoretical and experimental models revealed that the sterilization was characterized by the concentration of hydroperoxy radicals (HOO·), which were dependent on the pH value. Bacterial inactivation rates were proportional to the HOO· concentrations calculated by the theoretical model. To evaluate the penetration of radicals into the cell membrane, a bacterial model using dye-included micelles was used. Decolouration rates of the model were also in proportion with the calculated HOO· concentrations. These results indicate that the key species for plasma sterilization were hydroperoxy radicals. More importantly, the high permeation of hydroperoxy radicals into the cell membrane plays a key role for efficient bactericidal inactivation using the reduced pH method.

At-line monitoring of key parameters of nisin fermentation by near infrared spectroscopy, chemometric modeling and model improvement.

PubMed

Guo, Wei-Liang; Du, Yi-Ping; Zhou, Yong-Can; Yang, Shuang; Lu, Jia-Hui; Zhao, Hong-Yu; Wang, Yao; Teng, Li-Rong

2012-03-01

An analytical procedure has been developed for at-line (fast off-line) monitoring of 4 key parameters including nisin titer (NT), the concentration of reducing sugars, cell concentration and pH during a nisin fermentation process. This procedure is based on near infrared (NIR) spectroscopy and Partial Least Squares (PLS). Samples without any preprocessing were collected at intervals of 1 h during fifteen batch of fermentations. These fermentation processes were implemented in 3 different 5 l fermentors at various conditions. NIR spectra of the samples were collected in 10 min. And then, PLS was used for modeling the relationship between NIR spectra and the key parameters which were determined by reference methods. Monte Carlo Partial Least Squares (MCPLS) was applied to identify the outliers and select the most efficacious methods for preprocessing spectra, wavelengths and the suitable number of latent variables (n (LV)). Then, the optimum models for determining NT, concentration of reducing sugars, cell concentration and pH were established. The correlation coefficients of calibration set (R (c)) were 0.8255, 0.9000, 0.9883 and 0.9581, respectively. These results demonstrated that this method can be successfully applied to at-line monitor of NT, concentration of reducing sugars, cell concentration and pH during nisin fermentation processes.

Job sharing in clinical nutrition management: a plan for successful implementation.

PubMed

Visocan, B J; Herold, L S; Mulcahy, M J; Schlosser, M F

1993-10-01

While women continue to enter the American work force in record numbers; many experience difficulty in juggling career and family obligations. Flexible scheduling is one option used to ease work and family pressures. Women's changing work roles have potentially noteworthy implications for clinical nutrition management, a traditionally female-dominated profession where the recruitment and retention of valued, experienced registered dietitians can prove to be a human resources challenge. Job sharing, one type of flexible scheduling, is applicable to the nutrition management arena. This article describes and offers a plan for overcoming obstacles to job sharing, including determining feasibility, gaining support of top management, establishing program design, announcing the job share program, and using implementation, monitoring, and fine-tuning strategies. Benefits that can be derived from a successful job share are reduced absenteeism, decreased turnover, enhanced recruitment, improved morale, increased productivity, improved job coverage, and enhanced skills and knowledge base. A case study illustrates one method for achieving job sharing success in clinical nutrition management.

Training Future Generations of Mental Health Researchers: Devising Strategies for Tough Times

PubMed Central

Reynolds, Charles F.; Pilkonis, Paul A.; Kupfer, David J.; Dunn, Leslie; Pincus, Harold A.

2009-01-01

Objective The authors describe a junior faculty scholars program in a large academic department of psychiatry, designed to reduce attrition during the high-risk period of transition from post-doctoral fellowship to receipt of the first extramural research award. Method Scholars receive 25% salary support for two years to enable their participation in a research survival skills practicum, mentored collection of pilot data, preparation of manuscripts for peer-reviewed publication, and submission of K23 and K01 proposals. Results Of 22 junior faculty scholars appointed during the period of 1999–2004, 17 have submitted K award proposals. All were funded on either the first or second submission Conclusions A program for junior faculty scholars can provide support for successfully navigating the critical and often difficult transition from post-doctoral fellowship to junior faculty. The program is expanding its efforts to assist K awardees in moving successfully along the developmental continuum (e.g., successful submission of R01, development of mentoring skills). PMID:17344458

Ad-hoc surface-enhanced Raman spectroscopy methodologies for the detection of artist dyestuffs: thin layer chromatography-surface enhanced Raman spectroscopy and in situ on the fiber analysis.

PubMed

Brosseau, Christa L; Gambardella, Alessa; Casadio, Francesca; Grzywacz, Cecily M; Wouters, Jan; Van Duyne, Richard P

2009-04-15

Tailored ad-hoc methods must be developed for successful identification of minute amounts of natural dyes on works of art using Surface-Enhanced Raman Spectroscopy (SERS). This article details two of these successful approaches using silver film over nanosphere (AgFON) substrates and silica gel coupled with citrate-reduced Ag colloids. The latter substrate functions as the test system for the coupling of thin-layer chromatography and SERS (TLC-SERS), which has been used in the current research to separate and characterize a mixture of several artists' dyes. The poor limit of detection of TLC is overcome by coupling with SERS, and dyes which co-elute to nearly the same spot can be distinguished from each other. In addition, in situ extractionless non-hydrolysis SERS was used to analyze dyed reference fibers, as well as historical textile fibers. Colorants such as alizarin, purpurin, carminic acid, lac dye, crocin, and Cape jasmine were thus successfully identified.

Fast life history traits promote invasion success in amphibians and reptiles.

PubMed

Allen, William L; Street, Sally E; Capellini, Isabella

2017-02-01

Competing theoretical models make different predictions on which life history strategies facilitate growth of small populations. While 'fast' strategies allow for rapid increase in population size and limit vulnerability to stochastic events, 'slow' strategies and bet-hedging may reduce variance in vital rates in response to stochasticity. We test these predictions using biological invasions since founder alien populations start small, compiling the largest dataset yet of global herpetological introductions and life history traits. Using state-of-the-art phylogenetic comparative methods, we show that successful invaders have fast traits, such as large and frequent clutches, at both establishment and spread stages. These results, together with recent findings in mammals and plants, support 'fast advantage' models and the importance of high potential population growth rate. Conversely, successful alien birds are bet-hedgers. We propose that transient population dynamics and differences in longevity and behavioural flexibility can help reconcile apparently contrasting results across terrestrial vertebrate classes. © 2017 The Authors. Ecology Letters published by CNRS and John Wiley & Sons Ltd.

Development of a user-friendly delivery method for the fungus Metarhizium anisopliae to control the ectoparasitic mite Varroa destructor in honey bee, Apis mellifera, colonies.

PubMed

Kanga, Lambert H B; Adamczyk, John; Patt, Joseph; Gracia, Carlos; Cascino, John

2010-12-01

A user-friendly method to deliver Metarhizium spores to honey bee colonies for control of Varroa mites was developed and tested. Patty blend formulations protected the fungal spores at brood nest temperatures and served as an improved delivery system of the fungus to bee hives. Field trials conducted in 2006 in Texas using freshly harvested spores indicated that patty blend formulations of 10 g of conidia per hive (applied twice) significantly reduced the numbers of mites per adult bee, mites in sealed brood cells, and residual mites at the end of the 47-day experimental period. Colony development in terms of adult bee populations and brood production also improved. Field trials conducted in 2007 in Florida using less virulent spores produced mixed results. Patty blends of 10 g of conidia per hive (applied twice) were less successful in significantly reducing the number of mites per adult bee. However, hive survivorship and colony strength were improved, and the numbers of residual mites were significantly reduced at the end of the 42-day experimental period. The overall results from 2003 to 2008 field trials indicated that it was critical to have fungal spores with good germination, pathogenicity and virulence. We determined that fungal spores (1 × 10(10) viable spores per gram) with 98% germination and high pathogenicity (95% mite mortality at day 7) provided successful control of mite populations in established honey bee colonies at 10 g of conidia per hive (applied twice). Overall, microbial control of Varroa mite with M. anisopliae is feasible and could be a useful component of an integrated pest management program.

Lessons in molecular recognition. 2. Assessing and improving cross-docking accuracy.

PubMed

Sutherland, Jeffrey J; Nandigam, Ravi K; Erickson, Jon A; Vieth, Michal

2007-01-01

Docking methods are used to predict the manner in which a ligand binds to a protein receptor. Many studies have assessed the success rate of programs in self-docking tests, whereby a ligand is docked into the protein structure from which it was extracted. Cross-docking, or using a protein structure from a complex containing a different ligand, provides a more realistic assessment of a docking program's ability to reproduce X-ray results. In this work, cross-docking was performed with CDocker, Fred, and Rocs using multiple X-ray structures for eight proteins (two kinases, one nuclear hormone receptor, one serine protease, two metalloproteases, and two phosphodiesterases). While average cross-docking accuracy is not encouraging, it is shown that using the protein structure from the complex that contains the bound ligand most similar to the docked ligand increases docking accuracy for all methods ("similarity selection"). Identifying the most successful protein conformer ("best selection") and similarity selection substantially reduce the difference between self-docking and average cross-docking accuracy. We identify universal predictors of docking accuracy (i.e., showing consistent behavior across most protein-method combinations), and show that models for predicting docking accuracy built using these parameters can be used to select the most appropriate docking method.

Streamed video clips to reduce anxiety in children during inhaled induction of anesthesia.

PubMed

Mifflin, Katherine A; Hackmann, Thomas; Chorney, Jill Maclaren

2012-11-01

Anesthesia induction in children is frequently achieved by inhalation of nitrous oxide and sevoflurane. Pediatric anesthesiologists commonly use distraction techniques such as humor or nonprocedural talk to reduce anxiety and facilitate a smooth transition at this critical phase. There is a large body of successful distraction research that explores the use of video and television distraction methods for minor medical and dental procedures, but little research on the use of this method for ambulatory surgery. In this randomized control trial study we examined whether video distraction is effective in reducing the anxiety of children undergoing inhaled induction before ambulatory surgery. Children (control = 47, video = 42) between 2 and 10 years old undergoing ambulatory surgery were randomly assigned to a video distraction or control group. In the video distraction group a video clip of the child's preference was played during induction, and the control group received traditional distraction methods during induction. The modified Yale Preoperative Anxiety Scale was used to assess the children's anxiety before and during the process of receiving inhalation anesthetics. All subjects were similar in their age and anxiety scores before entering the operating rooms. Children in the video distraction group were significantly less anxious at induction and showed a significantly smaller change in anxiety from holding to induction than did children in the control group. Playing video clips during the inhaled induction of children undergoing ambulatory surgery is an effective method of reducing anxiety. Therefore, pediatric anesthesiologists may consider using video distraction as a useful, valid, alternative strategy for achieving a smooth transition to the anesthetized state.

Lean for Government: Eliminating the Seven Wastes

NASA Technical Reports Server (NTRS)

Shepherd, Christena C.

2012-01-01

With shrinking budgets and a slow economy, it is becoming increasingly important for all government agencies to become more efficient. Citizens expect and deserve efficient and effective services from federal, state and local government agencies. One of the best methods to improve efficiency and eliminate waste is to institute the business process improvement methodologies known collectively as Lean; however, with reduced budgets, it may not be possible to train everyone in Lean or to engage the services of a trained consultant. It is possible, however, to raise awareness of the "Seven Wastes" of Lean in each employee, and encourage them to identify areas for improvement. Management commitment is vital to the success of these initiatives, and it is also important to develop the right metrics that will track the success of these changes.

Effectiveness of Culturally Appropriate Initiative on Drug-Related Harm Reduction for Sex Workers on the Thai/Malaysian Border.

PubMed

Nunun, Worapol; Kanato, Manop

2015-07-01

Drug use can harm to sex workers. Abstinence intervention, however, may not be appropriate since drug use fosters their career performance. The objective was to develop the culturally appropriate model for sex workers participation on drug demand reduction at the Thailand/Malaysian border This study was a pre-post quasi-experimental design. Tripartite participation was used to develop the model aiming to reduce harm regarding drug use. The study carried out during June 2010-May 2011. Data were collected from 150 key informant interviews, 56 focus group discussions, 22 participant observations in various situations, and numerous related materials. Descriptive statistics, survival analysis and 95% confidence interval were utilizedfor quantitative data. Qualitative data were analyzed by content analysis. Drug related harm reduction was evaluated at two-week time along implementation period of 12 months. 89.5% of all sessions introduced could decrease drug related harm. Of all sex workers participated in the study, intended to treat analysis showed 86.9% success rate (95% CI; 77.1, 96.7). Of these, 32.6% became abstinence, 39.1% reduced most of drug related harm. 13.0% reduced partial drug related harm either lessfrequency, less quantity, less concentration, decrease types of drugs/switch to safe drugs or safer method of administration. 2.2% was infancy stage, which needed further support. Key success ofthe model was tripartite participation. With active leaders and strong support, sex workers were continually motivated to reduce harm regarding drug use.

Mitigating flood exposure: Reducing disaster risk and trauma signature.

PubMed

Shultz, James M; McLean, Andrew; Herberman Mash, Holly B; Rosen, Alexa; Kelly, Fiona; Solo-Gabriele, Helena M; Youngs, Georgia A; Jensen, Jessica; Bernal, Oscar; Neria, Yuval

2013-01-01

Introduction. In 2011, following heavy winter snowfall, two cities bordering two rivers in North Dakota, USA faced major flood threats. Flooding was foreseeable and predictable although the extent of risk was uncertain. One community, Fargo, situated in a shallow river basin, successfully mitigated and prevented flooding. For the other community, Minot, located in a deep river valley, prevention was not possible and downtown businesses and one-quarter of the homes were inundated, in the city's worst flood on record. We aimed at contrasting the respective hazards, vulnerabilities, stressors, psychological risk factors, psychosocial consequences, and disaster risk reduction strategies under conditions where flood prevention was, and was not, possible. Methods . We applied the "trauma signature analysis" (TSIG) approach to compare the hazard profiles, identify salient disaster stressors, document the key components of disaster risk reduction response, and examine indicators of community resilience. Results . Two demographically-comparable communities, Fargo and Minot, faced challenging river flood threats and exhibited effective coordination across community sectors. We examined the implementation of disaster risk reduction strategies in situations where coordinated citizen action was able to prevent disaster impact (hazard avoidance) compared to the more common scenario when unpreventable disaster strikes, causing destruction, harm, and distress. Across a range of indicators, it is clear that successful mitigation diminishes both physical and psychological impact, thereby reducing the trauma signature of the event. Conclusion . In contrast to experience of historic flooding in Minot, the city of Fargo succeeded in reducing the trauma signature by way of reducing risk through mitigation.

Software-assisted post-interventional assessment of radiofrequency ablation

NASA Astrophysics Data System (ADS)

Rieder, Christian; Geisler, Benjamin; Bruners, Philipp; Isfort, Peter; Na, Hong-Sik; Mahnken, Andreas H.; Hahn, Horst K.

2014-03-01

Radiofrequency ablation (RFA) is becoming a standard procedure for minimally invasive tumor treatment in clinical practice. Due to its common technical procedure, low complication rate, and low cost, RFA has become an alternative to surgical resection in the liver. To evaluate the therapy success of RFA, thorough follow-up imaging is essential. Conventionally, shape, size, and position of tumor and coagulation are visually compared in a side-by-side manner using pre- and post-interventional images. To objectify the verification of the treatment success, a novel software assistant allowing for fast and accurate comparison of tumor and coagulation is proposed. In this work, the clinical value of the proposed assessment software is evaluated. In a retrospective clinical study, 39 cases of hepatic tumor ablation are evaluated using the prototype software and conventional image comparison by four radiologists with different levels of experience. The cases are randomized and evaluated in two sessions to avoid any recall-bias. Self-confidence of correct diagnosis (local recurrence vs. no local recurrence) on a six-point scale is given for each case by the radiologists. Sensitivity, specificity, positive and negative predictive values as well as receiver operating curves are calculated for both methods. It is shown that the software-assisted method allows physicians to correctly identify local tumor recurrence with a higher percentage than the conventional method (sensitivity: 0.6 vs. 0.35), whereas the percentage of correctly identified successful ablations is slightly reduced (specificity: 0.83 vs. 0.89).

A Method for Preparing DNA Sequencing Templates Using a DNA-Binding Microplate

PubMed Central

Yang, Yu; Hebron, Haroun R.; Hang, Jun

2009-01-01

A DNA-binding matrix was immobilized on the surface of a 96-well microplate and used for plasmid DNA preparation for DNA sequencing. The same DNA-binding plate was used for bacterial growth, cell lysis, DNA purification, and storage. In a single step using one buffer, bacterial cells were lysed by enzymes, and released DNA was captured on the plate simultaneously. After two wash steps, DNA was eluted and stored in the same plate. Inclusion of phosphates in the culture medium was found to enhance the yield of plasmid significantly. Purified DNA samples were used successfully in DNA sequencing with high consistency and reproducibility. Eleven vectors and nine libraries were tested using this method. In 10 μl sequencing reactions using 3 μl sample and 0.25 μl BigDye Terminator v3.1, the results from a 3730xl sequencer gave a success rate of 90–95% and read-lengths of 700 bases or more. The method is fully automatable and convenient for manual operation as well. It enables reproducible, high-throughput, rapid production of DNA with purity and yields sufficient for high-quality DNA sequencing at a substantially reduced cost. PMID:19568455

Improving Management of Green Retrofits from a Stakeholder Perspective: A Case Study in China.

PubMed

Liang, Xin; Shen, Geoffrey Qiping; Guo, Li

2015-10-28

Green retrofits, which improve the environment and energy efficiency of buildings, are considered a potential solution for reducing energy consumption as well as improving human health and productivity. They represent some of the riskiest, most complex, and most uncertain projects to manage. As the foundation of project management, critical success factors (CSFs) have been emphasized by previous research. However, most studies identified and prioritized CSFs independently of stakeholders. This differs from the reality, where the success of green retrofits is tightly interrelated to the stakeholders of projects. To improve the analysis from a stakeholder perspective, the present study proposed an innovative method based on a two-mode social network analysis to integrate CSF analysis with stakeholders. The results of this method can provide further understanding of the interactions between stakeholders and CSFs, and the underlying relationship among CSFs through stakeholders. A pilot study was conducted to apply the proposed method and assess the CSFs for green retrofits in China. The five most significant CSFs are identified in the management of green retrofit. Furthermore, the interrelations between stakeholders and CSFs, coefficient and clusters of CSFs are likewise discussed.

Improving Management of Green Retrofits from a Stakeholder Perspective: A Case Study in China

PubMed Central

Liang, Xin; Shen, Geoffrey Qiping; Guo, Li

2015-01-01

Green retrofits, which improve the environment and energy efficiency of buildings, are considered a potential solution for reducing energy consumption as well as improving human health and productivity. They represent some of the riskiest, most complex, and most uncertain projects to manage. As the foundation of project management, critical success factors (CSFs) have been emphasized by previous research. However, most studies identified and prioritized CSFs independently of stakeholders. This differs from the reality, where the success of green retrofits is tightly interrelated to the stakeholders of projects. To improve the analysis from a stakeholder perspective, the present study proposed an innovative method based on a two-mode social network analysis to integrate CSF analysis with stakeholders. The results of this method can provide further understanding of the interactions between stakeholders and CSFs, and the underlying relationship among CSFs through stakeholders. A pilot study was conducted to apply the proposed method and assess the CSFs for green retrofits in China. The five most significant CSFs are identified in the management of green retrofit. Furthermore, the interrelations between stakeholders and CSFs, coefficient and clusters of CSFs are likewise discussed. PMID:26516897

Speeding up nuclear magnetic resonance spectroscopy by the use of SMAll Recovery Times - SMART NMR

NASA Astrophysics Data System (ADS)

Vitorge, Bruno; Bodenhausen, Geoffrey; Pelupessy, Philippe

2010-11-01

A drastic reduction of the time required for two-dimensional NMR experiments can be achieved by reducing or skipping the recovery delay between successive experiments. Novel SMAll Recovery Times (SMART) methods use orthogonal pulsed field gradients in three spatial directions to select the desired pathways and suppress interference effects. Two-dimensional spectra of dilute amino acids with concentrations as low as 2 mM can be recorded in about 0.1 s per increment in the indirect domain.

Compound 49b Reduces Inflammatory Markers and Apoptosis after Ocular Blast Injury

DTIC Science & Technology

2015-11-01

provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid...finalize the testing of Compound 49b in the IGBP-3 pathway in a trauma model. Specifically, we have done experimentation on how the inflammatory...effects of Compound 49b after ocular blast injury and successfully generated a method for the isolation of retinal ganglion cells, which are critical

Method for computing self-consistent solution in a gun code

DOEpatents

Nelson, Eric M

2014-09-23

Complex gun code computations can be made to converge more quickly based on a selection of one or more relaxation parameters. An eigenvalue analysis is applied to error residuals to identify two error eigenvalues that are associated with respective error residuals. Relaxation values can be selected based on these eigenvalues so that error residuals associated with each can be alternately reduced in successive iterations. In some examples, relaxation values that would be unstable if used alone can be used.

Ports in a storm.

PubMed

Sharma, Dinesh C

2006-04-01

In many parts of the world, shipping-related emissions have already exceeded or are expected to soon exceed those from land-based sources. Shipping emissions can be reduced substantially by using some of the same technologies being applied to land-based sources, including cleaner engines and fuels, exhaust control methods, and operational modifications. Various ports are testing the feasibility of these mechanisms with varying degrees of success. What is perhaps most greatly needed is expedited creation of better regulations at all levels, from the International Maritime Organization to port city authorities.

Particle damping applied research on mining dump truck vibration control

NASA Astrophysics Data System (ADS)

Song, Liming; Xiao, Wangqiang; Guo, Haiquan; Yang, Zhe; Li, Zeguang

2018-05-01

Vehicle vibration characteristics has become an important evaluation indexes of mining dump truck. In this paper, based on particle damping technology, mining dump truck vibration control was studied by combining the theoretical simulation with actual testing, particle damping technology was successfully used in mining dump truck cab vibration control. Through testing results analysis, with a particle damper, cab vibration was reduced obviously, the methods and basis were provided for vehicle vibration control research and particle damping technology application.

[New guidelines in regard to cervical cancer screening].

PubMed

Vargas-Hernández, Víctor Manuel; Acosta-Altamirano, Gustavo; Moreno-Eutimio, Mario Adán; Vargas-Aguilar, Víctor Manuel

2014-01-01

Cancer screening programs have been successful in reducing the incidence and mortality due to cervical cancer. For more than a decade, the human papillomavirus test has been recommended as part of these programs, however, Pap tests is not currently recommended for women 65 years of age who participated adequately in screening programs, continuing with these screening programs is not needed. Screening programs will be different in special populations at greatest risk where tests are frequently needed or use of alternative methods.

Vapors-liquid phase separator. [infrared telescope heat sink

NASA Technical Reports Server (NTRS)

Frederking, T. H. K.; Brown, G. S.; Chuang, C.; Kamioka, Y.; Kim, Y. I.; Lee, J. M.; Yuan, S. W. K.

1980-01-01

The use of porous plugs, mostly with in the form of passive devices with constant area were considered as vapor-liquid phase separators for helium 2 storage vessels under reduced gravity. The incorporation of components with variable cross sectional area as a method of flow rate modification was also investigated. A particular device which uses a shutter-type system for area variation was designed and constructed. This system successfully permitted flor rate changes of up to plus or minus 60% from its mean value.

Thermomechanical Contact Phenomena and Wear of Sliding Components

DTIC Science & Technology

1989-07-31

seals. Many of those methods were used in this study. • • I I i II I I I I I I I l1 2. METHDS Sliding wear tests were conducted on Inconel 625 seal rings...wear. These coatings have been used successfully in reducing the wear of machine tools , aircraft and automobile engine parts, etc. It is only recently...scanning electron microscopy were tools employed to determine the wear behavior and wear mechanism associated with the various chromium carbide and tungsten

Optimal patch code design via device characterization

NASA Astrophysics Data System (ADS)

Wu, Wencheng; Dalal, Edul N.

2012-01-01

In many color measurement applications, such as those for color calibration and profiling, "patch code" has been used successfully for job identification and automation to reduce operator errors. A patch code is similar to a barcode, but is intended primarily for use in measurement devices that cannot read barcodes due to limited spatial resolution, such as spectrophotometers. There is an inherent tradeoff between decoding robustness and the number of code levels available for encoding. Previous methods have attempted to address this tradeoff, but those solutions have been sub-optimal. In this paper, we propose a method to design optimal patch codes via device characterization. The tradeoff between decoding robustness and the number of available code levels is optimized in terms of printing and measurement efforts, and decoding robustness against noises from the printing and measurement devices. Effort is drastically reduced relative to previous methods because print-and-measure is minimized through modeling and the use of existing printer profiles. Decoding robustness is improved by distributing the code levels in CIE Lab space rather than in CMYK space.

Low-Dimensional Feature Representation for Instrument Identification

NASA Astrophysics Data System (ADS)

Ihara, Mizuki; Maeda, Shin-Ichi; Ikeda, Kazushi; Ishii, Shin

For monophonic music instrument identification, various feature extraction and selection methods have been proposed. One of the issues toward instrument identification is that the same spectrum is not always observed even in the same instrument due to the difference of the recording condition. Therefore, it is important to find non-redundant instrument-specific features that maintain information essential for high-quality instrument identification to apply them to various instrumental music analyses. For such a dimensionality reduction method, the authors propose the utilization of linear projection methods: local Fisher discriminant analysis (LFDA) and LFDA combined with principal component analysis (PCA). After experimentally clarifying that raw power spectra are actually good for instrument classification, the authors reduced the feature dimensionality by LFDA or by PCA followed by LFDA (PCA-LFDA). The reduced features achieved reasonably high identification performance that was comparable or higher than those by the power spectra and those achieved by other existing studies. These results demonstrated that our LFDA and PCA-LFDA can successfully extract low-dimensional instrument features that maintain the characteristic information of the instruments.

Point of optimal kinematic error: improvement of the instantaneous helical pivot method for locating centers of rotation.

PubMed

De Rosario, Helios; Page, Alvaro; Mata, Vicente

2014-05-07

This paper proposes a variation of the instantaneous helical pivot technique for locating centers of rotation. The point of optimal kinematic error (POKE), which minimizes the velocity at the center of rotation, may be obtained by just adding a weighting factor equal to the square of angular velocity in Woltring׳s equation of the pivot of instantaneous helical axes (PIHA). Calculations are simplified with respect to the original method, since it is not necessary to make explicit calculations of the helical axis, and the effect of accidental errors is reduced. The improved performance of this method was validated by simulations based on a functional calibration task for the gleno-humeral joint center. Noisy data caused a systematic dislocation of the calculated center of rotation towards the center of the arm marker cluster. This error in PIHA could even exceed the effect of soft tissue artifacts associated to small and medium deformations, but it was successfully reduced by the POKE estimation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluating Swine Injection Technologies as a Workplace Musculoskeletal Injury Intervention: A Study Protocol

PubMed Central

Bath, Brenna; Milosavljevic, Stephan; Kociolek, Aaron M.; Predicala, Bernardo; Penz, Erika; Adebayo, Olugbenga; Whittington, Lee

2017-01-01

Intensification of modern swine production has led to many new technologies, including needleless injectors. Although needleless injectors may increase productivity (by reducing injection time) and reduce needlestick injuries, the effect on risk for musculoskeletal disorders is not clear. This project will compare conventional needles with needleless injectors in terms of cost, productivity, injury rates, biomechanical exposures, and worker preference. Muscle activity (EMG) and hand/wrist posture will be measured on swine workers performing injection tasks with both injection methods. Video recordings during the exposure assessments will compare the duration and productivity for each injection method using time-and-motion methods. Injury claim data from up to 60 pig barns will be analyzed for needlestick and musculoskeletal injuries before/after needleless injector adoption. Workers and managers will be asked about what they like and dislike about each method and what helps and hinders successful implementation. The information above will be input into a cost-benefit model to determine the incremental effects of needleless injectors in terms of occupational health, worker preference, and the financial “bottom line” of the farm. Findings will be relevant to the swine industry and are intended to be transferable to other new technologies in animal production. PMID:29214171

Evaluating Swine Injection Technologies as a Workplace Musculoskeletal Injury Intervention: A Study Protocol.

PubMed

Trask, Catherine; Bath, Brenna; Milosavljevic, Stephan; Kociolek, Aaron M; Predicala, Bernardo; Penz, Erika; Adebayo, Olugbenga; Whittington, Lee

2017-01-01

Intensification of modern swine production has led to many new technologies, including needleless injectors. Although needleless injectors may increase productivity (by reducing injection time) and reduce needlestick injuries, the effect on risk for musculoskeletal disorders is not clear. This project will compare conventional needles with needleless injectors in terms of cost, productivity, injury rates, biomechanical exposures, and worker preference. Muscle activity (EMG) and hand/wrist posture will be measured on swine workers performing injection tasks with both injection methods. Video recordings during the exposure assessments will compare the duration and productivity for each injection method using time-and-motion methods. Injury claim data from up to 60 pig barns will be analyzed for needlestick and musculoskeletal injuries before/after needleless injector adoption. Workers and managers will be asked about what they like and dislike about each method and what helps and hinders successful implementation. The information above will be input into a cost-benefit model to determine the incremental effects of needleless injectors in terms of occupational health, worker preference, and the financial "bottom line" of the farm. Findings will be relevant to the swine industry and are intended to be transferable to other new technologies in animal production.

Staff and consumer perspectives on defining treatment success and failure in assertive community treatment.

PubMed

Stull, Laura G; McGrew, John H; Salyers, Michelle P

2010-09-01

Although assertive community treatment (ACT) has been consistently recognized as effective, there has been little research as to what constitutes success in ACT. The purpose of this study was to understand how ACT consumers and staff define treatment success and failure and to examine whether definitions varied between staff and consumers. Investigators conducted semistructured interviews with 25 staff and 23 consumers from four ACT teams. Across perspectives, success and failure were most clearly related to consumer factors. Other themes included having basic needs met, being socially involved, and taking medications. Reduced hospitalizations were mentioned infrequently. Consumers were more likely than staff to identify the level or type of treatment as defining success and failure, whereas staff were more likely than consumers to discuss substance abuse when defining failure and improved symptoms when defining success. Success in ACT should be viewed more broadly than reduced hospitalizations and include domains such as social involvement.

Composition and location of simulated lake-shore redds influence incubation success in kokanee, Oncorhynchus nerka

USGS Publications Warehouse

Fincel, M.J.; Chipps, S.R.; Bennett, D.H.

2009-01-01

Methods for improving spawning habitat for lakeshore spawning kokanee, Oncorhynchus nerka (Walbaum), were explored by quantifying incubation success of embryos exposed to three substrate treatments in Lake Pend Oreille, Idaho, USA. Substrate treatments included no modification that used existing gravels in the lake (EXISTING), a cleaned substrate treatment where existing gravels were sifted in the water column to remove silt (CLEANED) and the addition of new, silt-free gravel (ADDED). Incubation success was evaluated using Whitlock-Vibert incubation boxes buried within each substrate treatment that contained recently fertilised embryos. Upon retrieval, live and dead sac fry and eyed eggs were enumerated to determine incubation success (sac fry and eyed eggs ?? 100/number of fertilised embryos). Incubation success varied significantly among locations and redd treatments. In general, incubation success among ADDED redds (0.0-13.0%) was significantly lower than that for EXISTING (1.4-61.0%) and CLEANED (0.4-62.5%) redds. Adding new gravel to spawning areas changed the morphometry of the gravel-water interface and probably exposed embryos to disturbance from wave action and reduced embryo survival. Moreover, efforts to improve spawning habitat for lakeshore spawning kokanee should consider water depth and location (e.g. protected shorelines) as important variables. Adding clean gravel to existing spawning areas may provide little benefit if water depth or lake-bottom morphometry are altered. ?? 2009 Blackwell Publishing Ltd.

MDR-TB patients in KwaZulu-Natal, South Africa: Cost-effectiveness of 5 models of care

PubMed Central

Wallengren, Kristina; Reddy, Tarylee; Besada, Donela; Brust, James C. M.; Voce, Anna; Desai, Harsha; Ngozo, Jacqueline; Radebe, Zanele; Master, Iqbal; Padayatchi, Nesri; Daviaud, Emmanuelle

2018-01-01

Background South Africa has a high burden of MDR-TB, and to provide accessible treatment the government has introduced different models of care. We report the most cost-effective model after comparing cost per patient successfully treated across 5 models of care: centralized hospital, district hospitals (2), and community-based care through clinics or mobile injection teams. Methods In an observational study five cohorts were followed prospectively. The cost analysis adopted a provider perspective and economic cost per patient successfully treated was calculated based on country protocols and length of treatment per patient per model of care. Logistic regression was used to calculate propensity score weights, to compare pairs of treatment groups, whilst adjusting for baseline imbalances between groups. Propensity score weighted costs and treatment success rates were used in the ICER analysis. Sensitivity analysis focused on varying treatment success and length of hospitalization within each model. Results In 1,038 MDR-TB patients 75% were HIV-infected and 56% were successfully treated. The cost per successfully treated patient was 3 to 4.5 times lower in the community-based models with no hospitalization. Overall, the Mobile model was the most cost-effective. Conclusion Reducing the length of hospitalization and following community-based models of care improves the affordability of MDR-TB treatment without compromising its effectiveness. PMID:29668748

Efficacy of Retrievable Metallic Stent with Fixation String for Benign Stricture after Upper Gastrointestinal Surgery

PubMed Central

Kim, Jeong-Eun; Lee, Myungsu; Hur, Saebeom; Kim, Minuk; Lee, Sang Hwan; Cho, Soo Buem; Kim, Chan Sun; Han, Joon Koo

2016-01-01

Objective To determine the efficacy of retrievable metallic stent with fixation string for benign anastomotic stricture after upper gastrointestinal (UGI) surgery. Materials and Methods From June 2009 to May 2015, a total of 56 retrievable metallic stents with fixation string were placed under fluoroscopy guidance in 42 patients who were diagnosed with benign anastomotic stricture after UGI surgery. Clinical success was defined as achieving normal regular diet (NRD). Results The clinical success rate after the first stent placement was 57.1% (24/42). After repeated stent placement and/or balloon dilation, the clinical success rate was increased to 83.3% (35/42). Six (14.3%) patients required surgical revision to achieve NRD. One (2.4%) patient failed to achieve NRD. Stent migration occurred in 60.7% (34/56) of patients. Successful rate of removing the stent using fixation string and angiocatheter was 94.6% (53/56). Distal migration occurred in 12 stents. Of the 12 stents, 10 (83.3%) were successfully removed whereas 2 could not be removed. No complication occurred regarding distal migration. Conclusion Using retrievable metallic stent with a fixation string is a feasible option for managing early benign anastomotic stricture after UGI surgery. It can reduce complications caused by distal migration of the stent. PMID:27833405

Cyanobacteria reduce quagga mussel (Dreissena rostriformis bugensis) spawning and fertilization success

USGS Publications Warehouse

Boegehold, Anna G.; Johnson, Nicholas; Ran, Jeffrey L.; Kashian, Donna R.

2018-01-01

Quagga mussels (Dreissena rostriformis bugensis) are highly fecund broadcast spawners invasive to freshwaters of North America and western Europe. We hypothesized that environmental cues from phytoplankton can trigger gamete release in quagga mussels. Nutritious algae may stimulate dreissenid spawning, but less palatable food, such as bloom-forming cyanobacteria, could be a hindrance. The objective of our study was to test whether exposure to cyanobacteria can inhibit quagga mussel spawning and fertilization. We assessed spawning in the presence of serotonin, a known spawning inducer, where adult quagga mussels placed in individual vials were exposed to 13 cyanobacteria cultures and purified algal toxin (microcystin-LR) with artificial lake water as the control. Fertilization success was evaluated by combining eggs with sperm in conjunction with cyanobacteria, and enumerating zygote formation marked by cellular cleavage. Several cyanobacterial strains reduced spawning and fertilization success, but microcystin-LR had no effect. Fertilization was more sensitive to cyanobacteria than gamete release. Only 1 culture, Aphanizomenon flos-aquae, inhibited spawning, whereas 6 cultures consisting of Anabaena flos-aquae, Dolichospermum lemmermanii, Gloeotrichia echinulata, Lyngbya wollei, and 2 Microcystis aeruginosa isolates reduced fertilization rates by up to 44%. The effects of cyanobacteria on reproduction in invasive freshwater mussels in the wild have not yet been identified. However, our laboratory studies show that concentrations of cyanobacteria that are possible during bloom conditions probably limit reproduction. Reproductive consequences on wild populations may become more prevalent as cyanobacteria blooms occur earlier in the year, making overlap between blooms and mussel spawning more common. Describing the mechanism by which cyanobacteria inhibit spawning and fertilization could reveal novel control methods to limit reproduction of this invasive species.

Integrating participatory community mobilization processes to improve dengue prevention: an eco-bio-social scaling up of local success in Machala, Ecuador

PubMed Central

Mitchell-Foster, Kendra; Ayala, Efraín Beltrán; Breilh, Jaime; Spiegel, Jerry; Wilches, Ana Arichabala; Leon, Tania Ordóñez; Delgado, Jefferson Adrian

2015-01-01

Background This project investigates the effectiveness and feasibility of scaling-up an eco-bio-social approach for implementing an integrated community-based approach for dengue prevention in comparison with existing insecticide-based and emerging biolarvicide-based programs in an endemic setting in Machala, Ecuador. Methods An integrated intervention strategy (IIS) for dengue prevention (an elementary school-based dengue education program, and clean patio and safe container program) was implemented in 10 intervention clusters from November 2012 to November 2013 using a randomized controlled cluster trial design (20 clusters: 10 intervention, 10 control; 100 households per cluster with 1986 total households). Current existing dengue prevention programs served as the control treatment in comparison clusters. Pupa per person index (PPI) is used as the main outcome measure. Particular attention was paid to social mobilization and empowerment with IIS. Results Overall, IIS was successful in reducing PPI levels in intervention communities versus control clusters, with intervention clusters in the six paired clusters that followed the study design experiencing a greater reduction of PPI compared to controls (2.2 OR, 95% CI: 1.2 to 4.7). Analysis of individual cases demonstrates that consideration for contexualizing programs and strategies to local neighborhoods can be very effective in reducing PPI for dengue transmission risk reduction. Conclusions In the rapidly evolving political climate for dengue control in Ecuador, integration of successful social mobilization and empowerment strategies with existing and emerging biolarvicide-based government dengue prevention and control programs is promising in reducing PPI and dengue transmission risk in southern coastal communities like Machala. However, more profound analysis of social determination of health is called for to assess sustainability prospects. PMID:25604763

Measuring the success of community science: the northern California Household Exposure Study.

PubMed

Brown, Phil; Brody, Julia Green; Morello-Frosch, Rachel; Tovar, Jessica; Zota, Ami R; Rudel, Ruthann A

2012-03-01

Environmental health research involving community participation has increased substantially since the National Institute of Environmental Health Sciences (NIEHS) environmental justice and community-based participatory research (CBPR) partnerships began in the mid-1990s. The goals of these partnerships are to inform and empower better decisions about exposures, foster trust, and generate scientific knowledge to reduce environmental health disparities in low-income, minority communities. Peer-reviewed publication and clinical health outcomes alone are inadequate criteria to judge the success of projects in meeting these goals; therefore, new strategies for evaluating success are needed. We reviewed the methods used to evaluate our project, "Linking Breast Cancer Advocacy and Environmental Justice," to help identify successful CBPR methods and to assist other teams in documenting effectiveness. Although our project precedes the development of the NIEHS Evaluation Metrics Manual, a schema to evaluate the success of projects funded through the Partnerships in Environmental Public Health (PEPH), our work reported here illustrates the record keeping and self-reflection anticipated in NIEHS's PEPH. Evaluation strategies should assess how CBPR partnerships meet the goals of all partners. Our partnership, which included two strong community-based organizations, produced a team that helped all partners gain organizational capacity. Environmental sampling in homes and reporting the results of that effort had community education and constituency-building benefits. Scientific results contributed to a court decision that required cumulative impact assessment for an oil refinery and to new policies for chemicals used in consumer products. All partners leveraged additional funding to extend their work. An appropriate evaluation strategy can demonstrate how CBPR projects can advance science, support community empowerment, increase environmental health literacy, and generate individual and policy action to protect health.

Twenty-Year Experience in the Diagnosis and Treatment of Infective Endocarditis

PubMed Central

2015-01-01

Aims The aim of this study was to compare the etiology, clinical course, selected diagnostic methods and efficacy of the treatment used in patients with infective endocarditis (IE) in the nineteen eighties and nineties. Material and Methods The study group comprised 300 patients with infective endocarditis hospitalized in the Institute of Cardiology in Warsaw in the following years: from 1982 to 1987 (150 patients: 75 successive patients with IE on the prosthetic valve and 75 successive patients with IE on the native valve), as well as from 1990 to 2003 (150 patients: 75 successive patients with IE on the prosthetic valve and 75 successive patients with IE on the native valve). Results In the nineties, immunological symptoms, embolism formation and progressive heart failure were diagnosed decidedly more frequently. Early prosthetic valve endocarditis (PVE) (up to 60 days after operation) occurred significantly more frequently in the eighties. The quantity of negative blood cultures in PVE has not decreased, it is still observed in over 20% of cases. For 20 years the etiology of PVE has remained the same, the dominant pathogen remains Staphylococcus. The frequency of PVE caused by Streptococci has markedly reduced. In both the decades analyzed the etiology of native valve endocarditis (NVE) was similar. In the eighties Streptococcus was predominant. In successive years the number of infections caused by Staphylococci was the same as that caused by Streptococci. Conclusions The incidence of early PVE decreased in the nineties. More patients were treated surgically with lesser peri-operative mortality. A lower incidence of infective endocarditis on prosthetic valves caused by streptococci may signify better prophylaxis against infective endocarditis. Infective endocarditis with sterile blood cultures continues to occur frequently. PMID:26230402

Enhancing resolution of free-flow zone electrophoresis via a simple sheath-flow sample injection.

PubMed

Yang, Ying; Kong, Fan-Zhi; Liu, Ji; Li, Jun-Min; Liu, Xiao-Ping; Li, Guo-Qing; Wang, Ju-Fang; Xiao, Hua; Fan, Liu-Yin; Cao, Cheng-Xi; Li, Shan

2016-07-01

In this work, a simple and novel sheath-flow sample injection method (SFSIM) is introduced to reduce the band broadening of free-flow zone electrophoresis separation in newly developed self-balance free-flow electrophoresis instrument. A needle injector was placed in the center of the separation inlet, into which the BGE and sample solution were pumped simultaneously. BGE formed sheath flow outside the sample stream, resulting in less band broadening related to hydrodynamics and electrodynamics. Hemoglobin and C-phycocyanin were successfully separated by the proposed method in contrast to the poor separation of free-flow electrophoresis with the traditional injection method without sheath flow. About 3.75 times resolution enhancement could be achieved by sheath-flow sample injection method. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The density-matrix renormalization group: a short introduction.

PubMed

Schollwöck, Ulrich

2011-07-13

The density-matrix renormalization group (DMRG) method has established itself over the last decade as the leading method for the simulation of the statics and dynamics of one-dimensional strongly correlated quantum lattice systems. The DMRG is a method that shares features of a renormalization group procedure (which here generates a flow in the space of reduced density operators) and of a variational method that operates on a highly interesting class of quantum states, so-called matrix product states (MPSs). The DMRG method is presented here entirely in the MPS language. While the DMRG generally fails in larger two-dimensional systems, the MPS picture suggests a straightforward generalization to higher dimensions in the framework of tensor network states. The resulting algorithms, however, suffer from difficulties absent in one dimension, apart from a much more unfavourable efficiency, such that their ultimate success remains far from clear at the moment.

The exact solutions and approximate analytic solutions of the (2 + 1)-dimensional KP equation based on symmetry method.

PubMed

Gai, Litao; Bilige, Sudao; Jie, Yingmo

2016-01-01

In this paper, we successfully obtained the exact solutions and the approximate analytic solutions of the (2 + 1)-dimensional KP equation based on the Lie symmetry, the extended tanh method and the homotopy perturbation method. In first part, we obtained the symmetries of the (2 + 1)-dimensional KP equation based on the Wu-differential characteristic set algorithm and reduced it. In the second part, we constructed the abundant exact travelling wave solutions by using the extended tanh method. These solutions are expressed by the hyperbolic functions, the trigonometric functions and the rational functions respectively. It should be noted that when the parameters are taken as special values, some solitary wave solutions are derived from the hyperbolic function solutions. Finally, we apply the homotopy perturbation method to obtain the approximate analytic solutions based on four kinds of initial conditions.

On the study of wavy leading-edge vanes to achieve low fan interaction noise

NASA Astrophysics Data System (ADS)

Tong, Fan; Qiao, Weiyang; Xu, Kunbo; Wang, Liangfeng; Chen, Weijie; Wang, Xunnian

2018-04-01

The application of wavy leading-edge vanes to reduce a single-stage axial fan noise is numerically studied. The aerodynamic and acoustic performance of the fan is numerically investigated using a hybrid unsteady Reynolds averaged Navier-Stokes (URANS)/acoustic analogy method (Goldstein equations). First, the hybrid URANS/Goldstein method is developed and successfully validated against experiment results. Next, numerical simulations are performed to investigate the noise reduction effects of the wavy leading-edge vanes. The aerodynamic and acoustic performance is assessed for a fan with vanes equipped with two different wavy leading-edge profiles and compared with the performance of conventional straight leading-edge vanes. Results indicate that a fan with wavy leading-edge vanes produces lower interaction noise than the baseline fan without a significant loss in aerodynamic performance. In fact, it is demonstrated that wavy leading-edge vanes have the potential to lead to both aerodynamic and acoustic improvements. The two different wavy leading-edge profiles are shown to successfully reduce the fan tone sound power level by 1.2 dB and 4.3 dB, respectively. Fan efficiency is also improved by about 1% with one of the tested wavy leading-edge profiles. Large eddy simulation (LES) is also performed for a simplified fan stage model to assess the effects of wavy leading-edge vanes on the broadband fan noise. Results indicate that the overall sound power level of a fan can be reduced by about 4 dB with the larger wavy leading-edge profile. Finally, the noise reduction mechanisms are investigated and analysed. It is found that the wavy leading-edge profiles can induce significant streamwise vorticity around the leading-edge protuberances and reduce pressure fluctuations (especially at locations of wavy leading-edge hills) and unsteady forces on the stator vanes. The underlying mechanism of the reduced pressure fluctuations is also discussed by examining the magnitude-squared coherence between the velocity and pressure fluctuations in the vicinity of the noise sources. Moreover, a reduction in the correlation level of the wall pressure fluctuations along the vane leading-edge is observed, as well as destructive phase interference along the vane leading-edge.

Test of spectral/spatial classifier

NASA Technical Reports Server (NTRS)

Landgrebe, D. A. (Principal Investigator); Kast, J. L.; Davis, B. J.

1977-01-01

The author has identified the following significant results. The supervised ECHO processor (which utilizes class statistics for object identification) successfully exploits the redundancy of states characteristic of sampled imagery of ground scenes to achieve better classification accuracy, reduce the number of classifications required, and reduce the variability of classification results. The nonsupervised ECHO processor (which identifies objects without the benefit of class statistics) successfully reduces the number of classifications required and the variability of the classification results.

Comparison of the atmospheric- and reduced-pressure HS-SPME strategies for analysis of residual solvents in commercial antibiotics using a steel fiber coated with a multiwalled carbon nanotube/polyaniline nanocomposite.

PubMed

Ghiasvand, Ali Reza; Nouriasl, Kolsoum; Yazdankhah, Fatemeh

2018-01-01

A low-cost, sensitive and reliable reduced-pressure headspace solid-phase microextraction (HS-SPME) setup was developed and evaluated for direct extraction of residual solvents in commercial antibiotics, followed by determination by gas chromatography with flame ionization detection (GC-FID). A stainless steel narrow wire was made porous and adhesive by platinization by a modified electrophoretic deposition method and coated with a polyaniline/multiwalled carbon nanotube nanocomposite. All experimental variables affecting the extraction efficiency were investigated for both atmospheric-pressure and reduced-pressure conditions. Comparison of the optimal experimental conditions and the results demonstrated that the reduced-pressure strategy leads to a remarkable increase in the extraction efficiency and reduction of the extraction time and temperature (10 min, 25 °Ϲ vs 20 min, 40 °Ϲ). Additionally, the reduced-pressure strategy showed better analytical performances compared with those obtained by the conventional HS-SPME-GC-FID method. Limit of detections, linear dynamic ranges, and relative standard deviations of the reduced-pressure HS-SPME procedure for benzene, toluene, ethylbenzene, and xylene (BTEX) in injectable solid drugs were obtained over the ranges of 20-100 pg g -1 , 0.02-40 μg g -1 , and 2.8-10.2%, respectively. The procedure developed was successful for the analysis of BTEX in commercial containers of penicillin, ampicillin, ceftriaxone, and cefazolin. Graphical abstract Schematic representation of the developed RP-HS-SPME setup.

Evaluation of Stability and Biological Activity of Solid Nanodispersion of Lambda-Cyhalothrin.

PubMed

Cui, Bo; Feng, Lei; Pan, Zhenzhong; Yu, Manli; Zeng, Zhanghua; Sun, Changjiao; Zhao, Xiang; Wang, Yan; Cui, Haixin

2015-01-01

Pesticides are essential agrochemicals used to protect plants from diseases, pests and weeds. However, the formulation defects of conventional pesticides cause food toxicity and ecological environmental problems. In this study, a novel, efficient and environmentally friendly formulation of lambda-cyhalothrin, a solid nanodispersion, was successfully developed based on melt-emulsification and high-speed shearing methods. The solid nanodispersion presented excellent advantages over conventional pesticide formulations in such formulation functions as dispersibility, stability and bioavailability. The formulation is free of organic solvents, and the use of surfactant is reduced. Therefore, the application of the solid nanodispersion in crop production will improve efficacy and reduce the occurrence of both pesticide residues in food and environmental pollution from pesticides.

Evaluation of Stability and Biological Activity of Solid Nanodispersion of Lambda-Cyhalothrin

PubMed Central

Cui, Bo; Feng, Lei; Pan, Zhenzhong; Yu, Manli; Zeng, Zhanghua; Sun, Changjiao; Zhao, Xiang; Wang, Yan; Cui, Haixin

2015-01-01

Pesticides are essential agrochemicals used to protect plants from diseases, pests and weeds. However, the formulation defects of conventional pesticides cause food toxicity and ecological environmental problems. In this study, a novel, efficient and environmentally friendly formulation of lambda-cyhalothrin, a solid nanodispersion, was successfully developed based on melt-emulsification and high-speed shearing methods. The solid nanodispersion presented excellent advantages over conventional pesticide formulations in such formulation functions as dispersibility, stability and bioavailability. The formulation is free of organic solvents, and the use of surfactant is reduced. Therefore, the application of the solid nanodispersion in crop production will improve efficacy and reduce the occurrence of both pesticide residues in food and environmental pollution from pesticides. PMID:26281043

Calculation of the Full Scattering Amplitude without Partial Wave Decomposition II: Inclusion of Exchange

NASA Technical Reports Server (NTRS)

Shertzer, Janine; Temkin, A.

2003-01-01

As is well known, the full scattering amplitude can be expressed as an integral involving the complete scattering wave function. We have shown that the integral can be simplified and used in a practical way. Initial application to electron-hydrogen scattering without exchange was highly successful. The Schrodinger equation (SE), which can be reduced to a 2d partial differential equation (pde), was solved using the finite element method. We have now included exchange by solving the resultant SE, in the static exchange approximation, which is reducible to a pair of coupled pde's. The resultant scattering amplitudes, both singlet and triplet, calculated as a function of energy are in excellent agreement with converged partial wave results.

Application of Compton-suppressed self-induced XRF to spent nuclear fuel measurement

NASA Astrophysics Data System (ADS)

Park, Se-Hwan; Jo, Kwang Ho; Lee, Seung Kyu; Seo, Hee; Lee, Chaehun; Won, Byung-Hee; Ahn, Seong-Kyu; Ku, Jeong-Hoe

2017-11-01

Self-induced X-ray fluorescence (XRF) is a technique by which plutonium (Pu) content in spent nuclear fuel can be directly quantified. In the present work, this method successfully measured the plutonium/uranium (Pu/U) peak ratio of a pressurized water reactor (PWR)'s spent nuclear fuel at the Korea atomic energy research institute (KAERI)'s post irradiation examination facility (PIEF). In order to reduce the Compton background in the low-energy X-ray region, the Compton suppression system additionally was implemented. By use of this system, the spectrum's background level was reduced by a factor of approximately 2. This work shows that Compton-suppressed selfinduced XRF can be effectively applied to Pu accounting in spent nuclear fuel.

Integrating Formal Methods and Testing 2002

NASA Technical Reports Server (NTRS)

Cukic, Bojan

2002-01-01

Traditionally, qualitative program verification methodologies and program testing are studied in separate research communities. None of them alone is powerful and practical enough to provide sufficient confidence in ultra-high reliability assessment when used exclusively. Significant advances can be made by accounting not only tho formal verification and program testing. but also the impact of many other standard V&V techniques, in a unified software reliability assessment framework. The first year of this research resulted in the statistical framework that, given the assumptions on the success of the qualitative V&V and QA procedures, significantly reduces the amount of testing needed to confidently assess reliability at so-called high and ultra-high levels (10-4 or higher). The coming years shall address the methodologies to realistically estimate the impacts of various V&V techniques to system reliability and include the impact of operational risk to reliability assessment. Combine formal correctness verification, process and product metrics, and other standard qualitative software assurance methods with statistical testing with the aim of gaining higher confidence in software reliability assessment for high-assurance applications. B) Quantify the impact of these methods on software reliability. C) Demonstrate that accounting for the effectiveness of these methods reduces the number of tests needed to attain certain confidence level. D) Quantify and justify the reliability estimate for systems developed using various methods.

Approaches to reducing photon dose calculation errors near metal implants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Jessie Y.; Followill, David S.; Howell, Reb

Purpose: Dose calculation errors near metal implants are caused by limitations of the dose calculation algorithm in modeling tissue/metal interface effects as well as density assignment errors caused by imaging artifacts. The purpose of this study was to investigate two strategies for reducing dose calculation errors near metal implants: implementation of metal-based energy deposition kernels in the convolution/superposition (C/S) dose calculation method and use of metal artifact reduction methods for computed tomography (CT) imaging. Methods: Both error reduction strategies were investigated using a simple geometric slab phantom with a rectangular metal insert (composed of titanium or Cerrobend), as well asmore » two anthropomorphic phantoms (one with spinal hardware and one with dental fillings), designed to mimic relevant clinical scenarios. To assess the dosimetric impact of metal kernels, the authors implemented titanium and silver kernels in a commercial collapsed cone C/S algorithm. To assess the impact of CT metal artifact reduction methods, the authors performed dose calculations using baseline imaging techniques (uncorrected 120 kVp imaging) and three commercial metal artifact reduction methods: Philips Healthcare’s O-MAR, GE Healthcare’s monochromatic gemstone spectral imaging (GSI) using dual-energy CT, and GSI with metal artifact reduction software (MARS) applied. For the simple geometric phantom, radiochromic film was used to measure dose upstream and downstream of metal inserts. For the anthropomorphic phantoms, ion chambers and radiochromic film were used to quantify the benefit of the error reduction strategies. Results: Metal kernels did not universally improve accuracy but rather resulted in better accuracy upstream of metal implants and decreased accuracy directly downstream. For the clinical cases (spinal hardware and dental fillings), metal kernels had very little impact on the dose calculation accuracy (<1.0%). Of the commercial CT artifact reduction methods investigated, the authors found that O-MAR was the most consistent method, resulting in either improved dose calculation accuracy (dental case) or little impact on calculation accuracy (spine case). GSI was unsuccessful at reducing the severe artifacts caused by dental fillings and had very little impact on calculation accuracy. GSI with MARS on the other hand gave mixed results, sometimes introducing metal distortion and increasing calculation errors (titanium rectangular implant and titanium spinal hardware) but other times very successfully reducing artifacts (Cerrobend rectangular implant and dental fillings). Conclusions: Though successful at improving dose calculation accuracy upstream of metal implants, metal kernels were not found to substantially improve accuracy for clinical cases. Of the commercial artifact reduction methods investigated, O-MAR was found to be the most consistent candidate for all-purpose CT simulation imaging. The MARS algorithm for GSI should be used with caution for titanium implants, larger implants, and implants located near heterogeneities as it can distort the size and shape of implants and increase calculation errors.« less

Development of an irradiation method with lateral modulation of SOBP width using a cone-type filter for carbon ion beams.

PubMed

Ishizaki, Azusa; Ishii, Keizo; Kanematsu, Nobuyuki; Kanai, Tatsuaki; Yonai, Shunsuke; Kase, Yuki; Takei, Yuka; Komori, Masataka

2009-06-01

Passive irradiation methods deliver an extra dose to normal tissues upstream of the target tumor, while in dynamic irradiation methods, interplay effects between dynamic beam delivery and target motion induced by breathing or respiration distort the dose distributions. To solve the problems of those two irradiation methods, the authors have developed a new method that laterally modulates the spread-out Bragg peak (SOBP) width. By reducing scanning in the depth direction, they expect to reduce the interplay effects. They have examined this new irradiation method experimentally. In this system, they used a cone-type filter that consisted of 400 cones in a grid of 20 cones by 20 cones. There were five kinds of cones with different SOBP widths arranged on the frame two dimensionally to realize lateral SOBP modulation. To reduce the number of steps of cones, they used a wheel-type filter to make minipeaks. The scanning intensity was modulated for each SOBP width with a pair of scanning magnets. In this experiment, a stepwise dose distribution and spherical dose distribution of 60 mm in diameter were formed. The nonflatness of the stepwise dose distribution was 5.7% and that of the spherical dose distribution was 3.8%. A 2 mm misalignment of the cone-type filter resulted in a nonflatness of more than 5%. Lateral SOBP modulation with a cone-type filter and a scanned carbon ion beam successfully formed conformal dose distribution with nonflatness of 3.8% for the spherical case. The cone-type filter had to be set to within 1 mm accuracy to maintain nonflatness within 5%. This method will be useful to treat targets moving during breathing and targets in proximity to important organs.

Rural Women Family Physicians: Strategies for Successful Work-Life Balance

PubMed Central

Phillips, Julie; Hustedde, Carol; Bjorkman, Sarah; Prasad, Rupa; Sola, Orlando; Wendling, Andrea; Bjorkman, Kurt; Paladine, Heather

2016-01-01

PURPOSE Women family physicians experience challenges in maintaining work-life balance while practicing in rural communities. We sought to better understand the personal and professional strategies that enable women in rural family medicine to balance work and personal demands and achieve long-term career satisfaction. METHODS Women family physicians practicing in rural communities in the United States were interviewed using a semistructured format. Interviews were recorded, professionally transcribed, and analyzed using an immersion and crystallization approach, followed by detailed coding of emergent themes. RESULTS The 25 participants described a set of strategies that facilitated successful work-life balance. First, they used reduced or flexible work hours to help achieve balance with personal roles. Second, many had supportive relationships with spouses and partners, parents, or other members of the community, which facilitated their ability to be readily available to their patients. Third, participants maintained clear boundaries around their work lives, which helped them to have adequate time for parenting, recreation, and rest. CONCLUSIONS Women family physicians can build successful careers in rural communities, but supportive employers, relationships, and patient approaches provide a foundation for this success. Educators, employers, communities, and policymakers can adapt their practices to help women family physicians thrive in rural communities. PMID:27184995

Enhanced light extraction efficiency of GaN-based light-emittng diodes by nitrogen implanted current blocking layer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Yong Deok; Oh, Seung Kyu; Park, Min Joo

Highlights: • A nitrogen implanted current-blocking layer was successfully demonstrated. • Light-extraction efficiency and radiant intensity was increased by more than 20%. • Ion implantation was successfully implemented in GaN based light-emitting diodes. - Abstract: GaN-based light emitting diodes (LEDs) with a nitrogen implanted current-blocking layer (CBL) were successfully demonstrated for improving the light extraction efficiency (LEE) and radiant intensity. The LEE and radiant intensity of the LEDs with a shallow implanted CBL with nitrogen was greatly increased by more than 20% compared to that of a conventional LED without the CBL due to an increase in the effective currentmore » path, which reduces light absorption at the thick p-pad electrode. Meanwhile, deep implanted CBL with a nitrogen resulted in deterioration of the LEE and radiant intensity because of formation of crystal damage, followed by absorption of the light generated at the multi-quantum well(MQW). These results clearly suggest that ion implantation method, which is widely applied in the fabrication of Si based devices, can be successfully implemented in the fabrication of GaN based LEDs by optimization of implanted depth.« less

Reducing the Take-Home Pathway of Pesticide Exposure: Behavioral Outcomes from the ¡Para Niños Saludables! Study

PubMed Central

Strong, Larkin L.; Thompson, Beti; Koepsell, Thomas D.; Meischke, Hendrika; Coronado, Gloria D.

2011-01-01

Objective To evaluate the effectiveness of a community intervention in promoting adoption of behaviors to reduce the take-home pathway of pesticide exposure in farmworker households. Methods Using two cross-sectional samples of farmworker households in 11 intervention and 12 comparison communities in Washington State, we examined whether differences over time in reported pesticide safety practices varied by community intervention status. Results Pesticide safety practices increased in both intervention and comparison communities over time. Changes were significantly greater in intervention communities for removing work shoes before entering the home (p=0.003) and marginally significantly greater for changing out of work clothes within one hour of arriving home (p=0.05). Conclusions The intervention was associated with modest effects in certain behaviors among farmworkers. Further research is needed to identify successful strategies for reducing the take-home pathway of pesticide exposure. PMID:19620892

One-Pot Synthesis of Reduced Graphene Oxide/Anatase Titanium Dioxide Composites for Photocatalytic Degradation of Methylene Blue.

PubMed

Lee, Hyo In; Park, Soo-Jin

2018-09-01

In this work, highly ordered TiO2-reduced graphene oxide sheets (TGS) were successfully fabricated via a one-pot solvothermal method with different amounts of graphene oxide (0.01, 0.03, 0.05, and 0.07 g). This was achieved by reacting graphene oxide (GO) layers with titanium isopropoxide as the TiO2 precursor. The TGS exhibited superior efficiency compared to pristine TiO2 and the best results were recorded for the TGS-0.05 sample. The presence of the reduced graphene oxide (rGO) component was determined to be an important factor governing the separation of the photogenerated electron-hole pair via interfacial charge transfer. The significantly increased activity of the TGS under simulated solar light in the degradation of methylene blue (MB) indicates that these materials are promising photocatalysts for efficient water purification.

Microbial ecology of a crude oil contaminated aquifer

USGS Publications Warehouse

Bekins, B.A.; Cozzarelli, I.M.; Warren, E.; Godsy, E.M.

2002-01-01

Detailed microbial analyses of a glacial outwash aquifer contaminated by crude oil provide insights into the pattern of microbial succession from iron reducing to methanogenic in the anaerobic portion of the contaminant plume. We analysed sediments from this area for populations of aerobes, iron reducers, fermenters and methanogens, using the most probable number method. On the basis of the microbial data the anaerobic area can be divided into distinct physiological zones dominated by either iron-reducers or a consortium of fermenters and methanogens. Chemistry and permeability data show that methanogenic conditions develop first in areas of high hydrocarbon flux. Thus, we find methanogens both in high permeability horizons and also where separate-phase crude oil is present in either the saturated or unsaturated zone. Microbial numbers peak at the top of the separate-phase oil suggesting that growth is most rapid in locations with access to both hydrocarbons and nutrients infiltrating from the surface.

New quantitative method for evaluation of motor functions applicable to spinal muscular atrophy.

PubMed

Matsumaru, Naoki; Hattori, Ryo; Ichinomiya, Takashi; Tsukamoto, Katsura; Kato, Zenichiro

2018-03-01

The aim of this study was to develop and introduce new method to quantify motor functions of the upper extremity. The movement was recorded using a three-dimensional motion capture system, and the movement trajectory was analyzed using newly developed two indices, which measure precise repeatability and directional smoothness. Our target task was shoulder flexion repeated ten times. We applied our method to a healthy adult without and with a weight, simulating muscle impairment. We also applied our method to assess the efficacy of a drug therapy for amelioration of motor functions in a non-ambulatory patient with spinal muscular atrophy. Movement trajectories before and after thyrotropin-releasing hormone therapy were analyzed. In the healthy adult, we found the values of both indices increased significantly when holding a weight so that the weight-induced deterioration in motor function was successfully detected. From the efficacy assessment of drug therapy in the patient, the directional smoothness index successfully detected improvements in motor function, which were also clinically observed by the patient's doctors. We have developed a new quantitative evaluation method of motor functions of the upper extremity. Clinical usability of this method is also greatly enhanced by reducing the required number of body-attached markers to only one. This simple but universal approach to quantify motor functions will provide additional insights into the clinical phenotypes of various neuromuscular diseases and developmental disorders. Copyright © 2017 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

Adaptive neural control for a class of nonlinear time-varying delay systems with unknown hysteresis.

PubMed

Liu, Zhi; Lai, Guanyu; Zhang, Yun; Chen, Xin; Chen, Chun Lung Philip

2014-12-01

This paper investigates the fusion of unknown direction hysteresis model with adaptive neural control techniques in face of time-delayed continuous time nonlinear systems without strict-feedback form. Compared with previous works on the hysteresis phenomenon, the direction of the modified Bouc-Wen hysteresis model investigated in the literature is unknown. To reduce the computation burden in adaptation mechanism, an optimized adaptation method is successfully applied to the control design. Based on the Lyapunov-Krasovskii method, two neural-network-based adaptive control algorithms are constructed to guarantee that all the system states and adaptive parameters remain bounded, and the tracking error converges to an adjustable neighborhood of the origin. In final, some numerical examples are provided to validate the effectiveness of the proposed control methods.

Potential testing of reprocessing procedures by real-time polymerase chain reaction: A multicenter study of colonoscopy devices.

PubMed

Valeriani, Federica; Agodi, Antonella; Casini, Beatrice; Cristina, Maria Luisa; D'Errico, Marcello Mario; Gianfranceschi, Gianluca; Liguori, Giorgio; Liguori, Renato; Mucci, Nicolina; Mura, Ida; Pasquarella, Cesira; Piana, Andrea; Sotgiu, Giovanni; Privitera, Gaetano; Protano, Carmela; Quattrocchi, Annalisa; Ripabelli, Giancarlo; Rossini, Angelo; Spagnolo, Anna Maria; Tamburro, Manuela; Tardivo, Stefano; Veronesi, Licia; Vitali, Matteo; Romano Spica, Vincenzo

2018-02-01

Reprocessing of endoscopes is key to preventing cross-infection after colonoscopy. Culture-based methods are recommended for monitoring, but alternative and rapid approaches are needed to improve surveillance and reduce turnover times. A molecular strategy based on detection of residual traces from gut microbiota was developed and tested using a multicenter survey. A simplified sampling and DNA extraction protocol using nylon-tipped flocked swabs was optimized. A multiplex real-time polymerase chain reaction (PCR) test was developed that targeted 6 bacteria genes that were amplified in 3 mixes. The method was validated by interlaboratory tests involving 5 reference laboratories. Colonoscopy devices (n = 111) were sampled in 10 Italian hospitals. Culture-based microbiology and metagenomic tests were performed to verify PCR data. The sampling method was easily applied in all 10 endoscopy units and the optimized DNA extraction and amplification protocol was successfully performed by all of the involved laboratories. This PCR-based method allowed identification of both contaminated (n = 59) and fully reprocessed endoscopes (n = 52) with high sensibility (98%) and specificity (98%), within 3-4 hours, in contrast to the 24-72 hours needed for a classic microbiology test. Results were confirmed by next-generation sequencing and classic microbiology. A novel approach for monitoring reprocessing of colonoscopy devices was developed and successfully applied in a multicenter survey. The general principle of tracing biological fluids through microflora DNA amplification was successfully applied and may represent a promising approach for hospital hygiene. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Single-tube analysis of DNA methylation with silica superparamagnetic beads.

PubMed

Bailey, Vasudev J; Zhang, Yi; Keeley, Brian P; Yin, Chao; Pelosky, Kristen L; Brock, Malcolm; Baylin, Stephen B; Herman, James G; Wang, Tza-Huei

2010-06-01

DNA promoter methylation is a signature for the silencing of tumor suppressor genes. Most widely used methods to detect DNA methylation involve 3 separate, independent processes: DNA extraction, bisulfite conversion, and methylation detection via a PCR method, such as methylation-specific PCR (MSP). This method includes many disconnected steps with associated losses of material, potentially reducing the analytical sensitivity required for analysis of challenging clinical samples. Methylation on beads (MOB) is a new technique that integrates DNA extraction, bisulfite conversion, and PCR in a single tube via the use of silica superparamagnetic beads (SSBs) as a common DNA carrier for facilitating cell debris removal and buffer exchange throughout the entire process. In addition, PCR buffer is used to directly elute bisulfite-treated DNA from SSBs for subsequent target amplifications. The diagnostic sensitivity of MOB was evaluated by methylation analysis of the CDKN2A [cyclin-dependent kinase inhibitor 2A (melanoma, p16, inhibits CDK4); also known as p16(INK4a)] promoter in serum DNA of lung cancer patients and compared with that of conventional methods. Methylation analysis consisting of DNA extraction followed by bisulfite conversion and MSP was successfully carried out within 9 h in a single tube. The median pre-PCR DNA yield was 6.61-fold higher with the MOB technique than with conventional techniques. Furthermore, MOB increased the diagnostic sensitivity in our analysis of the CDKN2A promoter in patient serum by successfully detecting methylation in 74% of cancer patients, vs the 45% detection rate obtained with conventional techniques. The MOB technique successfully combined 3 processes into a single tube, thereby allowing ease in handling and an increased detection throughput. The increased pre-PCR yield in MOB allowed efficient, diagnostically sensitive methylation detection.

Nouvelle methode d'integration energetique pour la retro-installation des procedes industriels et la transformation des usines papetieres

NASA Astrophysics Data System (ADS)

Bonhivers, Jean-Christophe

The increase in production of goods over the last decades has led to the need for improving the management of natural resources management and the efficiency of processes. As a consequence, heat integration methods for industry have been developed. These have been successful for the design of new plants: the integration principles are largely employed, and energy intensity has dramatically decreased in many processes. Although progress has also been achieved in integration methods for retrofit, these methods still need further conceptual development. Furthermore, methodological difficulties increase when trying to retrofit heat exchange networks that are closely interrelated to water networks, such as the case of pulp and paper mills. The pulp and paper industry seeks to increase its profitability by reducing production costs and optimizing supply chains. Recent process developments in forestry biorefining give this industry the opportunity for diversification into bio-products, increasing potential profit margins, and at the same time modernizing its energy systems. Identification of energy strategies for a mill in a changing environment, including the possibility of adding a biorefinery process on the industrial site, requires better integration methods for retrofit situations. The objective of this thesis is to develop an energy integration method for the retrofit of industrial systems and the transformation of pulp and paper mills, ant to demonstrate the method in case studies. Energy is conserved and degraded in a process. Heat can be converted into electricity, stored as chemical energy, or rejected to the environment. A systematic analysis of successive degradations of energy between the hot utilities until the environment, through process operations and existing heat exchangers, is essential in order to reduce the heat consumption. In this thesis, the "Bridge Method" for energy integration by heat exchanger network retrofit has been developed. This method is the first that considers the analysis of these degradations. The fundamental mechanism to reduce the heat consumption in an existing network has been made explicit; it is the basis of the developed method. The Bridge Method includes the definition of "a bridge", which is a set of modifications leading to heat reduction in a heat exchanger network. It is proven that, for a given set of streams, only bridges can lead to heat savings. The Bridge Method also includes (1) a global procedure for heat exchanger network retrofit, (2) a procedure to enumerate systematically the bridges, (3) "a network table" to easily evaluate them, and (4) an "energy transfer diagram" showing the effect of the two first principles of thermodynamics of energy conservation and degradation in industrial processes in order to identify energy savings opportunities. The Bridge Method can be used for the analysis of networks including several types of heat transfer, and site-wide analysis. The Bridge Method has been applied in case studies for retrofitting networks composed of indirect-contact heat exchangers, including the network of a kraft pulp mill, and also networks of direct-contact heat exchangers, including the hot water production system of a pulp mill. The method has finally been applied for the evaluation of a biorefinery process, alone or hosted in a kraft pulp mill. Results show that the use of the method significantly reduces the search space and leads to identification of the relevant solutions. The necessity of a bridge to reduce the inputs and outputs of a process is a consequence of the two first thermodynamics principles of energy conservation and increase in entropy. The concept of bridge alone can also be used as a tool for process analysis, and in numerical optimization-based approaches for energy integration.

Single-step CE for miniaturized and easy-to-use system.

PubMed

Ono, Koichi; Kaneda, Shohei; Fujii, Teruo

2013-03-01

We developed a novel single-step capillary electrophoresis (SSCE) scheme for miniaturized and easy to use system by using a microchannel chip, which was made from the hydrophilic material polymethyl methacrylate (PMMA), equipped with a capillary stop valve. Taking the surface tension property of liquids into consideration, the capillary effect was used to introduce liquids and control capillary stop valves in a partial barrier structure in the wall of the microchannel. Through the combined action of stop valves and air vents, both sample plug formation for electrophoresis and sample injection into a separation channel were successfully performed in a single step. To optimize SSCE, different stop valve structures were evaluated using actual microchannel chips and the finite element method with the level set method. A partial barrier structure at the bottom of the channel functioned efficiently as a stop valve. The stability of stop valve was confirmed by a shock test, which was performed by dropping the microchannel chip to a floor. Sample plug deformation could be reduced by minimizing the size of the side partial barrier. By dissolving hydroxyl ethyl cellulose and using it as the sample solution, the EOF and adsorption of the sample into the PMMA microchannel were successfully reduced. Using this method, a 100-bp DNA ladder was concentrated; good separation was observed within 1 min. At a separation length of 5 mm, the signal was approximately 20-fold higher than a signal of original sample solution by field-amplified sample stacking effect. All operations, including liquid introduction and sample separation, can be completed within 2 min by using the SSCE scheme. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Edge detection and localization with edge pattern analysis and inflection characterization

NASA Astrophysics Data System (ADS)

Jiang, Bo

2012-05-01

In general edges are considered to be abrupt changes or discontinuities in two dimensional image signal intensity distributions. The accuracy of front-end edge detection methods in image processing impacts the eventual success of higher level pattern analysis downstream. To generalize edge detectors designed from a simple ideal step function model to real distortions in natural images, research on one dimensional edge pattern analysis to improve the accuracy of edge detection and localization proposes an edge detection algorithm, which is composed by three basic edge patterns, such as ramp, impulse, and step. After mathematical analysis, general rules for edge representation based upon the classification of edge types into three categories-ramp, impulse, and step (RIS) are developed to reduce detection and localization errors, especially reducing "double edge" effect that is one important drawback to the derivative method. But, when applying one dimensional edge pattern in two dimensional image processing, a new issue is naturally raised that the edge detector should correct marking inflections or junctions of edges. Research on human visual perception of objects and information theory pointed out that a pattern lexicon of "inflection micro-patterns" has larger information than a straight line. Also, research on scene perception gave an idea that contours have larger information are more important factor to determine the success of scene categorization. Therefore, inflections or junctions are extremely useful features, whose accurate description and reconstruction are significant in solving correspondence problems in computer vision. Therefore, aside from adoption of edge pattern analysis, inflection or junction characterization is also utilized to extend traditional derivative edge detection algorithm. Experiments were conducted to test my propositions about edge detection and localization accuracy improvements. The results support the idea that these edge detection method improvements are effective in enhancing the accuracy of edge detection and localization.

Self-Care for Nurse Leaders in Acute Care Environment Reduces Perceived Stress: A Mixed-Methods Pilot Study Merits Further Investigation.

PubMed

Dyess, Susan Mac Leod; Prestia, Angela S; Marquit, Doren-Elyse; Newman, David

2018-03-01

Acute care practice settings are stressful. Nurse leaders face stressful demands of numerous competing priorities. Some nurse leaders experience unmanageable stress, but success requires self-care. This article presents a repeated measures intervention design study using mixed methods to investigate a self-care simple meditation practice for nurse leaders. Themes and subthemes emerged in association with the three data collection points: at baseline (pretest), after 6 weeks, and after 12 weeks (posttest) from introduction of the self-care simple meditation practice. An analysis of variance yielded a statistically significant drop in perceived stress at 6 weeks and again at 12 weeks. Conducting future research is merited.

Practical implementation of spectral-intensity dispersion-canceled optical coherence tomography with artifact suppression

NASA Astrophysics Data System (ADS)

Shirai, Tomohiro; Friberg, Ari T.

2018-04-01

Dispersion-canceled optical coherence tomography (OCT) based on spectral intensity interferometry was devised as a classical counterpart of quantum OCT to enhance the basic performance of conventional OCT. In this paper, we demonstrate experimentally that an alternative method of realizing this kind of OCT by means of two optical fiber couplers and a single spectrometer is a more practical and reliable option than the existing methods proposed previously. Furthermore, we develop a recipe for reducing multiple artifacts simultaneously on the basis of simple averaging and verify experimentally that it works successfully in the sense that all the artifacts are mitigated effectively and only the true signals carrying structural information about the sample survive.

Multislice imaging of integrated circuits by precession X-ray ptychography.

PubMed

Shimomura, Kei; Hirose, Makoto; Takahashi, Yukio

2018-01-01

A method for nondestructively visualizing multisection nanostructures of integrated circuits by X-ray ptychography with a multislice approach is proposed. In this study, tilt-series ptychographic diffraction data sets of a two-layered circuit with a ∼1.4 µm gap at nine incident angles are collected in a wide Q range and then artifact-reduced phase images of each layer are successfully reconstructed at ∼10 nm resolution. The present method has great potential for the three-dimensional observation of flat specimens with thickness on the order of 100 µm, such as three-dimensional stacked integrated circuits based on through-silicon vias, without laborious sample preparation.

Application of genomic selection in farm animal breeding.

PubMed

Tan, Cheng; Bian, Cheng; Yang, Da; Li, Ning; Wu, Zhen-Fang; Hu, Xiao-Xiang

2017-11-20

Genomic selection (GS) has become a widely accepted method in animal breeding to genetically improve economic traits. With the declining costs of high-density SNP chips and next-generation sequencing, GS has been applied in dairy cattle, swine, poultry and other animals and gained varying degrees of success. Currently, major challenges in GS studies include further reducing the cost of genome-wide SNP genotyping and improving the predictive accuracy of genomic estimated breeding value (GEBV). In this review, we summarize various methods for genome-wide SNP genotyping and GEBV prediction, and give a brief introduction of GS in livestock and poultry breeding. This review will provide a reference for further implementation of GS in farm animal breeding.

Community-Based Management of Acute Malnutrition to Reduce Wasting in Urban Informal Settlements of Mumbai, India: A Mixed-Methods Evaluation

PubMed Central

Shah More, Neena; Waingankar, Anagha; Ramani, Sudha; Chanani, Sheila; D'Souza, Vanessa; Pantvaidya, Shanti; Fernandez, Armida; Jayaraman, Anuja

2018-01-01

Background: We evaluated an adaptation of a large-scale community-based management of acute malnutrition program run by an NGO with government partnerships, in informal settlements of Mumbai, India. The program aimed to reduce the prevalence of wasting among children under age 3 and covered a population of approximately 300,000. Methods: This study used a mixed-methods approach including a quasi-experimental design to compare prevalence estimates of wasting in intervention areas with neighboring informal settlements. Cross-sectional data were collected from March through November 2014 for the baseline and October through December 2015 for the endline. Endline data were analyzed using mixed-effects logistic regression models, adjusting for child, maternal, and household characteristics. In addition, we conducted in-depth interviews with 37 stakeholders (13 staff and 24 mothers) who reported on salient features that contributed to successful implementation of the program. Results: We interviewed 2,578 caregivers at baseline and 3,455 at endline in intervention areas. In comparison areas, we interviewed 2,082 caregivers at baseline and 2,122 at endline. At endline, the prevalence of wasting decreased by 28% (18% to 13%) in intervention areas and by 5% (16.9% to 16%) in comparison areas. Analysis of the endline data indicated that children in intervention areas were significantly less likely to be malnourished (adjusted odds ratio, 0.81; confidence interval, 0.67 to 0.99). Stakeholders identified 4 main features as contributing to the success of the program: (1) tailoring and reinforcement of information provided to caregivers in informal settings, (2) constant field presence of staff, (3) holistic case management of issues beyond immediate malnourishment, and (4) persistence of field staff in persuading reluctant families. Staff capabilities were enhanced through training, stringent monitoring mechanisms, and support from senior staff in tackling difficult cases. Conclusion: NGO–government partnerships can revitalize existing community-based programs in urban India. Critical to success are processes that include reinforced knowledge-building of caregivers, a high level of field support and encouragement to the community, and constant monitoring and follow-up of cases by all staff levels. PMID:29602868

A long time ago, where were the galaxies far, far away?

NASA Astrophysics Data System (ADS)

Sirko, Edwin

How did the universe get from then to now ? I examine this broad cosmological problem from two perspectives: forward and backward. In the forward perspective, I implement a method of generating initial conditions for N -body simulations that accurately models real-space statistical properties, such as the mass variance in spheres and the correlation function. The method requires running ensembles of simulations because the power in the DC mode is no longer assumed to be zero. For moderately sized boxes, I demonstrate that the new method corrects the previously widely ignored underestimate in the mass variance in spheres and the shape of the correlation function. In the backward perspective, I use reconstruction techniques to transform a simulated or observed cosmological density field back in time to the early universe. A simple reconstruction technique is used to sharpen the baryon acoustic peak in the correlation function in simulations. At z = 0.3, one can reduce the sample variance error bar on the acoustic scale by at least a factor of 2 and in principle by nearly a factor of 4. This has significant implications for future observational surveys aiming to measure the cosmological distance scale. Another reconstruction technique, Monge-Ampere-Kantorovich reconstruction, is used on evolved N -body simulations to calibrate its effectiveness in recovering the linear power spectrum. A new "memory model" parametrizes the evolution of Fourier modes into two parameters that describe the amount of memory a given mode retains and how much the mode has been scrambled by nonlinear evolution. Reconstruction is spectacularly successful in restoring the memory of Fourier modes and reducing the scrambling; however, the success of reconstruction is not so obvious when considering the power spectrum alone. I apply reconstruction to a volume-limited sample of galaxies from the Sloan Digital Sky Survey and conclude that linear bias is not a good model in the range 0.01 h Mpc -1 [Special characters omitted.] k [Special characters omitted.] 0.5 h Mpc -1 . The most impressive success of reconstruction applied to real data is that the confidence interval on the normalization of the power spectrum is typically halved when using the reconstructed instead of the nonlinear power spectrum.

Enterprise Architecture Planning in developing A planning Information System: a Case Study of Semarang State University

NASA Astrophysics Data System (ADS)

Budiman, Kholiq; Prahasto, Toni; Kusumawardhani, Amie

2018-02-01

This research has applied an integrated design and development of planning information system, which is been designed using Enterprise Architecture Planning. Frequent discrepancy between planning and realization of the budget that has been made, resulted in ineffective planning, is one of the reason for doing this research. The design using EAP aims to keep development aligned and in line with the strategic direction of the organization. In the practice, EAP is carried out in several stages of the planning initiation, identification and definition of business functions, proceeded with architectural design and EA implementation plan that has been built. In addition to the design of the Enterprise Architecture, this research carried out the implementation, and was tested by several methods of black box and white box. Black box testing method is used to test the fundamental aspects of the software, tested by two kinds of testing, first is using User Acceptance Testing and the second is using software functionality testing. White box testing method is used to test the effectiveness of the code in the software, tested using unit testing. Tests conducted using white box and black box on the integrated planning information system, is declared successful. Success in the software testing can not be ascertained if the software built has not shown any distinction from prior circumstance to the development of this integrated planning information system. For ensuring the success of this system implementation, the authors test consistency between the planning of data and the realization of prior-use of the information system, until after-use information system. This consistency test is done by reducing the time data of the planning and realization time. From the tabulated data, the planning information system that has been built reduces the difference between the planning time and the realization time, in which indicates that the planning information system can motivate the planner unit in realizing the budget that has been designed. It also proves that the value chain of the information planning system has brought implications for budget realization.

A preliminary study of the population-adjusted effectiveness of substance abuse prevention programming: towards making IOM program types comparable.

PubMed

Shamblen, Stephen R; Derzon, James H

2009-03-01

The Institute of Medicine distinguishes between programs based on who is targeted: the entire population (universal), those at risk (selective), or persons exhibiting the early stages of use or related problem behavior (indicated). Evaluations suggest that although universal programs can be effective in reducing and preventing substance use, selective and indicated programs are both more effective and have greater cost-benefit ratios. This paper tests these assumptions by comparing the impact of these program types in reducing and preventing substance use at the individual level (i.e., those exposed to intervention services) and in the population (i.e., those exposed and not exposed to intervention services). A meta-analysis was performed on 43 studies of 25 programs to examine program comparability across IOM categories. When examining unadjusted effect sizes at the individual level, universal programs were modestly more successful in reducing tobacco use, but selective and indicated programs were modestly more successful in reducing alcohol and marijuana use. When adjusted to the population level, the average effect sizes for selective and indicated programs were reduced by approximately half. At the population level, universal programs were more successful in reducing tobacco and marijuana use and selective and indicated programs were more successful in reducing alcohol use. Editors' Strategic Implications: the authors' focus on the public health value of a prevention strategy is compelling and provides a model for analyses of other strategies and content areas.

Comparison of success rates of orthodontic mini-screws by the insertion method.

PubMed

Kim, Jung Suk; Choi, Seong Hwan; Cha, Sang Kwon; Kim, Jang Han; Lee, Hwa Jin; Yeom, Sang Seon; Hwang, Chung Ju

2012-10-01

The aim of this study was to compare the success rates of the manual and motor-driven mini-screw insertion methods according to age, gender, length of mini-screws, and insertion sites. We retrospectively reviewed 429 orthodontic mini-screw placements in 286 patients (102 in men and 327 in women) between 2005 and 2010 at private practice. Age, gender, mini-screw length, and insertion site were cross-tabulated against the insertion methods. The Cochran-Mantel-Haenszel test was performed to compare the success rates of the 2 insertion methods. The motor-driven method was used for 228 mini-screws and the manual method for the remaining 201 mini-screws. The success rates were similar in both men and women irrespective of the insertion method used. With respect to mini-screw length, no difference in success rates was found between motor and hand drivers for the 6-mm-long mini-screws (68.1% and 69.5% with the engine driver and hand driver, respectively). However, the 8-mm-long mini-screws exhibited significantly higher success rates (90.4%, p < 0.01) than did the 6-mm-long mini-screws when placed with the engine driver. The overall success rate was also significantly higher in the maxilla (p < 0.05) when the engine driver was used. Success rates were similar among all age groups regardless of the insertion method used. Taken together, the motor-driven insertion method can be helpful to get a higher success rate of orthodontic mini-screw placement.

[Rehabilitation after occupational accidents in professional dancers: advice with due regard to dance specific aspects].

PubMed

Wanke, E M; Quarcoo, D; Uibel, S; Groneberg, D A

2012-08-01

The highly specialized occupation of professional dancers is a combination of sport and artistic expression. The exertion is only possible with a fully operative body. Although professional dancers may be compared with elite athletes and acute injuries frequently happen, dancers do not seem to be granted an appropriate therapy after accidents as compared with athletes. Although even minor injuries may potentially endanger the career of a professional dancer, physiotherapeutic or physical treatment methods are applied in every tenth case only. Alternative and holistic concepts such as Pilates or dance-specific re-integration that proved successful in professional dancers, are used in even fewer instances. The aim of this study is to develop a rehabilitation concept for professional dancers focusing on dance-medicine aspects. It has been taken into account that the best physical outcomes are reflected in an optimized, holistic, dance-specific therapy and rehabilitation. Intensifying and exploiting dance-specific methods of treatment can not only reduce costs in the end but can even contribute to reducing the duration of rehabilitation after injuries of dancers. Preconditions for realization of the rehabilitative model are a high qualification of all persons working in the rehabilitative field as well as a marked willingness to cooperate in the various dance fields. Both gender-specific and dance-style particularities are to be taken into account to ensure a successful rehabilitation. © Georg Thieme Verlag KG Stuttgart · New York.

Restoration of voice function by using biological feedback in laryngeal and hypopharyngeal carcinoma patients

NASA Astrophysics Data System (ADS)

Choinzonov, E. L.; Balatskaya, L. N.; Chizhevskaya, S. Yu.; Meshcheryakov, R. V.; Kostyuchenko, E. Yu.; Ivanova, T. A.

2016-08-01

The aim of the research is to develop and introduce a new technique of post-laryngectomy voice rehabilitation of laryngeal and hypopharyngeal carcinoma patients. The study involves comparing and analyzing 82 cases of voice function restoration by using biological feedback based on mathematical modeling of voice production. The advantage of the modern technology-based method in comparison with the conventional one is proved. Restoration of voice function using biofeedback allows taking into account patient's abilities, adjusting parameters of voice trainings, and controlling their efficiency in real-time mode. The data obtained indicate that the new method contributes to the rapid inclusion of self-regulation mechanisms of the body and results in the overall success rate of voice rehabilitation in totally laryngectomized patients reaching 92%, which reduces the rehabilitation period to 18 days, compared to 86% and 38 days in the control group, respectively. Restoration of disturbed functions after successful treatment is an important task of rehabilitation and is crucial in terms of the quality of cancer patients' lives. To assess life quality of laryngeal cancer patients, the EORTC Quality of Life Core Questionnaire (QLQ-C30), and head and neck module (QLQ-H&N35) were used. The analyzed results proved that the technique of biofeedback voice restoration significantly improves the quality of life of laryngectomized patients. It allows reducing the number of disabled people, restoring patients' ability to work-related activities, and significantly improving social adaptation of these patients.

Successful treatment of severe hypertriglyceridemia with a formula diet rich in omega-3 fatty acids and medium-chain triglycerides.

PubMed

Hauenschild, Annette; Bretzel, Reinhard G; Schnell-Kretschmer, Henning; Kloer, Hans-Ulrich; Hardt, Philip D; Ewald, Nils

2010-01-01

Patients with highly increased plasma triglyceride levels are at risk of developing serious complications such as pancreatitis, coronary heart disease and stroke. Therefore it is important to rapidly decrease plasma triglyceride levels. A sufficient control of triglyceride levels with drugs like fibrates, statins or nicotinic acid can usually only be attained after a couple of weeks. Plasma exchange appears to be a fast but expensive method to reduce triglyceride levels. In this study we describe the use of a new omega-3 fatty acid and medium-chain triglyceride-rich formula diet as a therapeutic concept to reduce plasma triglyceride levels fast and effectively. Thirty-two patients with severe hypertriglyceridemia were treated with the especially composed formula diet for a period of 7 days. Within this period of time, plasma triglycerides decreased from 1,601 (402-4,555) to 554 (142-2,382) mg/dl (p < 0.05). Total cholesterol levels were reduced from 417 (211-841) to 287 (165-457) mg/dl (p < 0.001). Fasting glucose and uric acid levels also slightly decreased (-8%; -12%). The formula diet as a 1-week treatment was well tolerated and accepted by the patients. This diet was successfully used as an acute treatment in severe hypertriglyceridemia and showed effectiveness in rapidly and safely lowering plasma triglyceride levels. (c) 2010 S. Karger AG, Basel.

An intensive effort to reduce fertility in Taoyuan County, Taiwan: 1973 intermediate report.

PubMed

Sun, T H

1974-08-01

From 1951 to 1973, the crude birthrate in Taiwan declined more than 50%; there is still work to be done to reduce the annual growth rate to less than 1%. This reduction was due to a change in the age composition of the population, an increase in the age at marriage, and reduced marital fertility (contraception and induced abortion). Further reductions will rely mainly on further reductions in marital fertility. An intensive family planning program, reaching 60% of eligible couples and concentrating on the pill, loop, and condom methods, has been active since 1964. Fertility will decline when the ideal family size lowers and when son preference is eliminated. 2 high fertility counties, Taipei and Taoyuan, were selected for intensified activity in 1972. Imp roved activities included: 1) systematic home visits and use of a control card system, 2) strengthened supervision of workers, 3) improved training and publicity programs, 4) use of incentives for loop referrals, and 5) encouragement of word-of-mouth publicity by satisfied contraceptors. Schedules and targets were met or exceeded. The long-range results cannot be measured yet. Reasons for the greater success of the project in Taoyuan than in Taipei are examined. Lessons learned from the project are enumerated. It can be seen that intensive local government operations can be successful, particularly when more and better paid workers are used.

Experimental evolution of multicellularity using microbial pseudo-organisms.

PubMed

Queller, David C; Strassmann, Joan E

2013-02-23

In a major evolutionary transition to a new level of organization, internal conflicts must be controlled before the transition can truly be successful. One such transition is that from single cells to multicellularity. Conflicts among cells in multicellular organisms can be greatly reduced if they consist of genetically identical clones. However, mutations to cheaters that experience one round of within-individual selection could still be a problem, particularly for certain life cycles. We propose an experimental evolution method to investigate this issue, using micro-organisms to construct multicellular pseudo-organisms, which can be evolved under different artificial life cycles. These experiments can be used to test the importance of various life cycle features in maintaining cooperation. They include structured reproduction, in which small propagule size reduces within-individual genetic variation. They also include structured growth, which increases local relatedness within individual bodies. Our method provides a novel way to test how different life cycles favour cooperation, even for life cycles that do not exist.

From fatalism to resilience: reducing disaster impacts through systematic investments.

PubMed

Hill, Harvey; Wiener, John; Warner, Koko

2012-04-01

This paper describes a method for reducing the economic risks associated with predictable natural hazards by enhancing the resilience of national infrastructure systems. The three-step generalised framework is described along with examples. Step one establishes economic baseline growth without the disaster impact. Step two characterises economic growth constrained by a disaster. Step three assesses the economy's resilience to the disaster event when it is buffered by alternative resiliency investments. The successful outcome of step three is a disaster-resistant core of infrastructure systems and social capacity more able to maintain the national economy and development post disaster. In addition, the paper considers ways to achieve this goal in data-limited environments. The method provides a methodology to address this challenge via the integration of physical and social data of different spatial scales into macroeconomic models. This supports the disaster risk reduction objectives of governments, donor agencies, and the United Nations International Strategy for Disaster Reduction. © 2012 The Author(s). Disasters © Overseas Development Institute, 2012.

Date palm sap collection: exploring opportunities to prevent Nipah transmission.

PubMed

Nahar, Nazmun; Sultana, Rebeca; Gurley, Emily S; Hossain, M Jahangir; Luby, Stephen P

2010-06-01

Nipah virus (NiV) infection is a seasonal disease in Bangladesh that coincides with the date palm sap collection season. Raw date palm sap is a delicacy to drink in Bengali culture. If fruit bats that are infected with NiV gain access to the sap for drinking, they might occasionally contaminate the sap through saliva and urine. In February 2007, we conducted a qualitative study in six villages, interviewing 27 date palm sap collectors (gachhis) within the geographical area where NiV outbreaks have occurred since 2001. Gachhis reported that bats pose a challenge to successful collection of quality sap, because bats drink and defecate into the sap which markedly reduces its value. They know some methods to prevent access by bats and other pests but do not use them consistently, because of lack of time and resources. Further studies to explore the effectiveness of these methods and to motivate gachhis to invest their time and money to use them could reduce the risk of human Nipah infection in Bangladesh.

A reduced-order model for compressible flows with buffeting condition using higher order dynamic mode decomposition with a mode selection criterion

NASA Astrophysics Data System (ADS)

Kou, Jiaqing; Le Clainche, Soledad; Zhang, Weiwei

2018-01-01

This study proposes an improvement in the performance of reduced-order models (ROMs) based on dynamic mode decomposition to model the flow dynamics of the attractor from a transient solution. By combining higher order dynamic mode decomposition (HODMD) with an efficient mode selection criterion, the HODMD with criterion (HODMDc) ROM is able to identify dominant flow patterns with high accuracy. This helps us to develop a more parsimonious ROM structure, allowing better predictions of the attractor dynamics. The method is tested in the solution of a NACA0012 airfoil buffeting in a transonic flow, and its good performance in both the reconstruction of the original solution and the prediction of the permanent dynamics is shown. In addition, the robustness of the method has been successfully tested using different types of parameters, indicating that the proposed ROM approach is a tool promising for using in both numerical simulations and experimental data.

OPTICON: Pro-Matlab software for large order controlled structure design

NASA Technical Reports Server (NTRS)

Peterson, Lee D.

1989-01-01

A software package for large order controlled structure design is described and demonstrated. The primary program, called OPTICAN, uses both Pro-Matlab M-file routines and selected compiled FORTRAN routines linked into the Pro-Matlab structure. The program accepts structural model information in the form of state-space matrices and performs three basic design functions on the model: (1) open loop analyses; (2) closed loop reduced order controller synthesis; and (3) closed loop stability and performance assessment. The current controller synthesis methods which were implemented in this software are based on the Generalized Linear Quadratic Gaussian theory of Bernstein. In particular, a reduced order Optimal Projection synthesis algorithm based on a homotopy solution method was successfully applied to an experimental truss structure using a 58-state dynamic model. These results are presented and discussed. Current plans to expand the practical size of the design model to several hundred states and the intention to interface Pro-Matlab to a supercomputing environment are discussed.

Toward zero waste to landfill: an effective method for recycling zeolite waste from refinery industry

NASA Astrophysics Data System (ADS)

Homchuen, K.; Anuwattana, R.; Limphitakphong, N.; Chavalparit, O.

2017-07-01

One-third of landfill waste of refinery plant in Thailand was spent chloride zeolite, which wastes a huge of land, cost and time for handling. Toward zero waste to landfill, this study was aimed at determining an effective method for recycling zeolite waste by comparing the chemical process with the electrochemical process. To investigate the optimum conditions of both processes, concentration of chemical solution and reaction time were carried out for the former, while the latter varied in term of current density, initial pH of water, and reaction time. The results stated that regenerating zeolite waste from refinery industry in Thailand should be done through the chemical process with alkaline solution because it provided the best chloride adsorption efficiency with cost the least. A successful recycling will be beneficial not only in reducing the amount of landfill waste but also in reducing material and disposal costs and consumption of natural resources as well.

Thermal and mechanical properties of reduced graphene oxide/polyurethane nanocomposite.

PubMed

Pokharel, Pashupati; Lee, Dai Soo

2014-08-01

Reduced graphene oxide (RGO) based polyurethane (PU) nanocomposites have been successfully prepared without using solvent by in-situ polymerization. RGO was derived from microwave (MW) irradiation of graphite oxide (GO) powder prepared by a modified Hummer's method. A minimum amount of poly(tetramethylene glycol) (PTMEG) was added during the dispersion of RGO in a solvent to stabilize the graphene sheets and to prevent RGO from the restacking after the removal of the solvent. After the reaction of RGO with 4,4'-diphenylmethane diisocyanate (MDI), we obtained the concentrate of RGO in MDI with a minimum amount of PTMEG. Our method facilitated the fine dispersion of RGO in PU elastomers and improved the interfacial strength between RGO and PU. With the incorporation of 2.0 wt% of RGO, the tensile strength and Young's modulus of the PU nanocomposites increased by 30% and 50%, respectively without sacrificing the elongation at break. It was found that the crystalline portion of hard segments of the PU was lowered by the RGO in the nanocomposites.

Frictional Performance Assessment of Cemented Carbide Surfaces Textured by Laser

NASA Astrophysics Data System (ADS)

Fang, S.; Llanes, L.; Klein, S.; Gachot, C.; Rosenkranz, A.; Bähre, D.; Mücklich, F.

2017-10-01

Cemented carbides are advanced engineering materials often used in industry for manufacturing cutting tools or supporting parts in tribological system. In order to improve service life, special attention has been paid to change surface conditions by means of different methods, since surface modification can be beneficial to reduce the friction between the contact surfaces as well as to avoid unintended damage. Laser surface texturing is one of the newly developed surface modification methods. It has been successfully introduced to fabricate some basic patterns on cemented carbide surfaces. In this work, Direct Laser Interference Patterning Technique (DLIP) is implemented to produce special line-like patterns on a cobalt (Co) and nickel (Ni) based cemented tungsten carbide grade. It is proven that the laser-produced patterns have high geometrical precision and quality stability. Furthermore, tribology testing using a nano-tribometer unit shows that friction is reduced by the line-like patterns, as compared to the polished one, under both lubricated and dry testing regimes, and the reduction is more pronounced in the latter case.

Can hospital-based doctors change their working hours? Evidence from Australia.

PubMed

Norman, R; Hall, J

2014-07-01

To explore factors predicting hospital-based doctors' desire to work less, and then their success in making that change. Consecutive waves of an Australian longitudinal survey of doctors (Medicine in Australia-Balancing Employment and Life). There were 6285 and 6337 hospital-based completers in the two waves, consisting of specialists, hospital-based non-specialists and specialist registrars. Forty-eight per cent stated a preference to reduce hours. Predictive characteristics were being female and working more than 40 h/week (both P < 0.01). An inverted U-shape relationship was observed for age, with younger and older doctors less likely to state the preference. Factors associated with not wanting to reduce working hours were being in excellent health and being satisfied with work (both P < 0.01). Of those who wanted to reduce working hours, only 32% successfully managed to do so in the subsequent year (defined by a reduction of at least 5 h/week). Predictors of successfully reducing hours were being older, female and working more than 40 h/week (all P < 0.01). Several factors predict the desire of hospital-based doctors to reduce hours and then their subsequent success in doing so. Designing policies that seek to reduce attrition may alleviate some of the ongoing pressures in the Australian hospital system. © 2014 The Authors; Internal Medicine Journal © 2014 Royal Australasian College of Physicians.

The great efficacy of personal and equipment assistance in reducing disability.

PubMed Central

Verbrugge, L M; Rennert, C; Madans, J H

1997-01-01

OBJECTIVES: Personal and equipment assistance are common strategies to reduce disability. This study sought to determine how often assistance reduces or even completely resolves health-related difficulties in everyday tasks. METHODS: Data are from the NHANES I Epidemiologic Followup Study. Adults aged 35 to 90 reported difficulty doing 12 everyday tasks on their own without assistance. Those stating that they had much difficulty or were unable were asked if they had personal assistance and/or equipment assistance, and their degree of difficulty with assistance. Use and efficacy of assistance are studied by gender, age, intrinsic (unassisted) degree of difficulty, and type of assistance. RESULTS: Most people use assistance for the 12 tasks; "personal assistance only" is the principal type used for upper-extremity and body transfer tasks; "equipment only" ranks first for lower-extremity tasks. Assistance reduces difficulty for the great majority of persons (75% to 85%) and completely resolves difficulty for about 25%. Equipment only proves to be the most efficacious strategy for reducing and resolving limitations. CONCLUSIONS: Equipment's success may be due to greater perceived gains when people accomplish the assistance by themselves. PMID:9096538

Evaluation and Optimization of Therapeutic Footwear for Neuropathic Diabetic Foot Patients Using In-Shoe Plantar Pressure Analysis

PubMed Central

Bus, Sicco A.; Haspels, Rob; Busch-Westbroek, Tessa E.

2011-01-01

OBJECTIVE Therapeutic footwear for diabetic foot patients aims to reduce the risk of ulceration by relieving mechanical pressure on the foot. However, footwear efficacy is generally not assessed in clinical practice. The purpose of this study was to assess the value of in-shoe plantar pressure analysis to evaluate and optimize the pressure-reducing effects of diabetic therapeutic footwear. RESEARCH DESIGN AND METHODS Dynamic in-shoe plantar pressure distribution was measured in 23 neuropathic diabetic foot patients wearing fully customized footwear. Regions of interest (with peak pressure >200 kPa) were selected and targeted for pressure optimization by modifying the shoe or insole. After each of a maximum of three rounds of modifications, the effect on in-shoe plantar pressure was measured. Successful optimization was achieved with a peak pressure reduction of >25% (criterion A) or below an absolute level of 200 kPa (criterion B). RESULTS In 35 defined regions, mean peak pressure was significantly reduced from 303 (SD 77) to 208 (46) kPa after an average 1.6 rounds of footwear modifications (P < 0.001). This result constitutes a 30.2% pressure relief (range 18–50% across regions). All regions were successfully optimized: 16 according to criterion A, 7 to criterion B, and 12 to criterion A and B. Footwear optimization lasted on average 53 min. CONCLUSIONS These findings suggest that in-shoe plantar pressure analysis is an effective and efficient tool to evaluate and guide footwear modifications that significantly reduce pressure in the neuropathic diabetic foot. This result provides an objective approach to instantly improve footwear quality, which should reduce the risk for pressure-related plantar foot ulcers. PMID:21610125

Addressing HIV/AIDS challenges in Uganda: does social capital generation by NGOs matter?

PubMed

Muriisa, Roberts Kabeba; Jamil, Ishtiaq

2011-01-01

HIV/AIDS has had devastating impacts in many countries, Uganda in particular. However, Uganda is depicted as one of the most successful countries in fighting HIV/AIDS. Among others, Uganda's success story is attributed to the open general environment which allows open discussions surrounding HIV/AIDS when other countries such as South Africa and Kenya denied the existence of the disease in their countries. In addition, the success is attributed to the policy which allowed many actors to participate in the fight against the disease. The primary focus of this article is to map the process of social capital generation by NGOs and how social capital benefits enhance mitigation of HIV/AIDS challenges in Uganda. The key to social capital is nurturing relationships. In this regard, HIV/AIDS NGOs play a central role in the way individuals, groups and communities interact, and how various kinds of social relations are forged with people living with HIV/AIDS and especially for those who are HIV infected. NGOs' success in reducing the number of HIV/AIDS cases in Uganda is based on their abilities to generate social capital. This involves inclusion and building social networks and empowerment at the individual and community levels, and disseminating information to reduce social stigma as well as discrimination. We used a mixed-method strategy to collect data for this study. We used a structured questionnaire having quantitative and qualitative question sets which focused on different social capital measurement indicators. We used observations and in-depth face-to-face interviews. A major finding of the study is that the ways individuals and groups are connected and interact with each other are important mechanisms for alleviating HIV/AIDS challenges in Uganda.

Long-term clinical outcomes of Ahmed valve implantation in patients with refractory glaucoma

PubMed Central

Lee, Chang Kyu; Ma, Kyoung Tak; Hong, Young Jae

2017-01-01

Purpose To evaluate the long-term efficacy of intraocular pressure (IOP) reduction and complications of Ahmed Glaucoma Valve (AGV) implantation in patients with refractory glaucoma. Design Retrospective study. Subjects The study involved 302 refractory glaucoma patients who underwent AGV implantation and had a minimum follow-up of 6 months between March 1995 and December 2013. Methods An operation was defined as successful when (1) the postoperative IOP remained between 5 and 21 mmHg and was reduced 30% compared to the baseline IOP with or without medication, (2) there was no loss of light perception or vision-threatening severe complications, and (3) no additional filtering or aqueous drainage surgery was required. Clinical records were reviewed. Main outcome measures IOP, anti-glaucoma medications, and complications Results The mean follow-up period was 62.25 months (range, 6 to 190 months). The cumulative probability of success was 89% at 6 months, 81% at 1 year, 66% at 3 years, 44% at 10 years, and 26% at 15 years. IOP was reduced from a mean of 32.2 ± 10.5 mmHg to 18.6 ± 9.1 mmHg at 1 month, 15.2 ± 7.0 mmHg at 6 months, and 14.2 ± 3.5 mmHg at 15 years. Surgical failures were significantly increased when preoperative IOP was high, and when severe complications occurred after AGV implantation (P < 0.05). Conclusion AGV implantation was successful for IOP control in patients with refractive glaucoma in the long term. However, the success rate of surgery decreased over time. Preoperative high IOP and severe complications related to the operation were significant risk factors for failure. PMID:29095931

Preventing Post-ERCP Pancreatitis: The Role of Prophylactic Pancreatic Duct Stenting in the Rectal NSAID Era

PubMed Central

Bekkali, Noor-L-Houda; Thomas, Tom; Keane, Margaret Geraldine; Murray, Sam; Joshi, Deepak; Elsayed, Ghassan; Johnson, Gavin James; Chapman, Michael Huw; Pereira, Stephen Paul; Webster, George John Mitchell

2018-01-01

Background Rectal non-steroidal anti-inflammatory drug at endoscopic retrograde cholangiopancreatography is now the standard of care to reduce the risk of post-ERCP pancreatitis. Pancreatic duct stenting also reduces the risk of post- ERCP pancreatitis in high-risk patients, but failed pancreatic duct stenting carries an increased PEP rate (up to 35%). Study Aim To assess the impact on post-ERCP pancreatitis of successful and unsuccessful pancreatic duct stent placement in the setting of universal rectal non-steroidal anti-inflammatory drug use. Methods Between 2013–2015, all patients undergoing endoscopic retrograde cholangiopancreatographys in our tertiary referral centre (where rectal non-steroidal anti-inflammatory drugs are used routinely) were included. The electronic patient’s records were reviewed and the following parameters were analysed: indication for pancreatic duct stenting; deployment success; and adverse events. Results A total of 1633 endoscopic retrograde cholangiopancreatographys were performed, and pancreatic duct stenting was attempted in 324 cases (20%), with successful placement in 307 patients (95%). Contra-indications to non-steroidal anti-inflammatory drugs were found in 106 (6.5%) patients. Prophylactic stenting failed in 12 of 213 patients; of whom one patient developed post-ERCP pancreatitis (8%). Eighteen (9%) patients with prophylactic pancreatic duct stents developed post-ERCP pancreatitis compared to 1.4% without prophylactic stents (RR 8.4, p=0.04). Conclusion A lack of difference in post-ERCP pancreatitis in those who underwent successful, and unsuccessful, pancreatic duct stent placement may reflect the protective effect of non-steroidal anti-inflammatory drugs. This data adds to evidence suggesting that pancreatic duct stenting may be less important, even in high-risk patients, with the widespread use of non-steroidal anti-inflammatory drugs. PMID:29731700

Research on Captive Broodstock Programs for Pacific Salmon, 2003-2004 Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berejikian, Barry A.; Athos, Jaime I.; Dittman, Andrew H.

The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. We were able to develop an analytical method for optimizing the detection of spawning events in Chinook salmon using EMG signals. The method developed essentially captured the consistently greater frequency of higher EMG values associated with females cover digging immediately following spawning. However, females implanted with EMGmore » tags retained the majority of their eggs, which significantly reduced their reproductive success compared to non-tagged females. Future work will include increased sample sizes, and modified tagging methods to reduce negative effects on reproductive success. Upper Columbia River sockeye salmon exposed to the odorants PEA, L-threonine, Larginine and L-glutamate were able to learn and remember these odorants as maturing adults up to 2.5 years after exposure. These results suggest that the alevin and smolt stages are both important developmental periods for successful olfactory imprinting. Furthermore, the period of time that fish are exposed to imprinting odors may be important for successful imprinting. Experimental fish exposed to imprinting odors as smolts for six or one weeks successfully imprinted to these odors but imprinting could not be demonstrated in smolts exposed to odors for only one day. A 2-3 C reduction in seawater rearing temperature during the fall and winter prior to final maturation had little effect on reproductive development of spring Chinook salmon. Body size at spawning and total ovary mass were similar between temperature treatments. The percentage of fertilized eggs was significantly higher for females exposed to the ambient temperature compared to those exposed to the chilled temperature. However, the percentage of embryos surviving to the eye-stage, total fecundity, and mean egg mass did not differ between treatments. This work is being continued with larger samples sizes and increased duration of temperature exposure. Exercise during the months prior to final maturation had no detectable effects on fertilization success or embryo viability in Redfish Lake Sockeye. Problems with highly variable or low eyed-embryo survival are most likely due to problems with fertilization. Synchronizing spawn timing between males and females may improve gamete fertility, perhaps by making oocyte maturation and ovulation more readily detectable and synchronous within the individual. Improvements in milt production (using GnRHa) and fertilization protocols have apparently increased fertilization success in Redfish Lake sockeye over previous years. Broodstock treatment with azithromycin immediately prior to spawning can protect against acute challenge with R. salmoninarum. Among fish challenged with 10,000 virulent R. salmoninarum cells per fish, progeny of broodstock treated with azithromycin exhibited significantly greater survival than progeny of sham-treated broodstock. Work on the efficacy of antibiotic treatment and vaccination against BKD before and after smoltification in offspring chinook salmon captive broodstocks is ongoing. To date, the long-term study of inbreeding indicates that the potential for anadromous Chinook salmon to respond rapidly to close inbreeding, with adverse consequences for marine survival and, possibly, growth. The effects of inbreeding expressed during early life history do not reveal significant effects. Overall, the results would support recommendations for initiating artificially propagated populations with sufficient, outbred broodstock and implementing carefully monitored breeding practices to minimize rates of inbreeding during a program's duration.« less

Metabolic primers for detection of (Per)chlorate-reducing bacteria in the environment and phylogenetic analysis of cld gene sequences.

PubMed

Bender, Kelly S; Rice, Melissa R; Fugate, William H; Coates, John D; Achenbach, Laurie A

2004-09-01

Natural attenuation of the environmental contaminant perchlorate is a cost-effective alternative to current removal methods. The success of natural perchlorate remediation is dependent on the presence and activity of dissimilatory (per)chlorate-reducing bacteria (DPRB) within a target site. To detect DPRB in the environment, two degenerate primer sets targeting the chlorite dismutase (cld) gene were developed and optimized. A nested PCR approach was used in conjunction with these primer sets to increase the sensitivity of the molecular detection method. Screening of environmental samples indicated that all products amplified by this method were cld gene sequences. These sequences were obtained from pristine sites as well as contaminated sites from which DPRB were isolated. More than one cld phylotype was also identified from some samples, indicating the presence of more than one DPRB strain at those sites. The use of these primer sets represents a direct and sensitive molecular method for the qualitative detection of (per)chlorate-reducing bacteria in the environment, thus offering another tool for monitoring natural attenuation. Sequences of cld genes isolated in the course of this project were also generated from various DPRB and provided the first opportunity for a phylogenetic treatment of this metabolic gene. Comparisons of the cld and 16S ribosomal DNA (rDNA) gene trees indicated that the cld gene does not track 16S rDNA phylogeny, further implicating the possible role of horizontal transfer in the evolution of (per)chlorate respiration.

Determination of antioxidants by a novel on-line HPLC-cupric reducing antioxidant capacity (CUPRAC) assay with post-column detection.

PubMed

Celik, Saliha Esin; Ozyürek, Mustafa; Güçlü, Kubilay; Apak, Reşat

2010-07-26

A novel on-line HPLC-cupric reducing antioxidant capacity (CUPRAC) method was developed for the selective determination of polyphenols (flavonoids, simple phenolic and hydroxycinnamic acids) in complex plant matrices. The method combines chromatographic separation, constituent analysis, and post-column identification of antioxidants in plant extracts. The separation of polyphenols was performed on a C18 column using gradient elution with two different mobile phase solutions, i.e., MeOH and 0.2% o-phosphoric acid. The HPLC-separated antioxidant polyphenols in the extracts react with copper(II)-neocuproine (Cu(II)-Nc) reagent in a post-column reaction coil to form a derivative. The reagent is reduced by antioxidants to the copper(I)-neocuproine (Cu(I)-Nc) chelate having maximum absorption at 450 nm. The negative peaks of antioxidant constituents were monitored by measuring the increase in absorbance due to Cu(I)-Nc. The detection limits of polyphenols at 450 nm (in the range of 0.17-3.46 microM) after post-column derivatization were comparable to those at 280 nm UV detection without derivatization. The developed method was successfully applied to the identification of antioxidant compounds in crude extracts of Camellia sinensis, Origanum marjorana and Mentha. The method is rapid, inexpensive, versatile, non-laborious, uses stable reagents, and enables the on-line qualitative and quantitative estimation of antioxidant constituents of complex plant samples. Copyright 2010 Elsevier B.V. All rights reserved.

Chemical control of ticks on cattle and the resistance of these parasites to acaricides.

PubMed

George, J E; Pound, J M; Davey, R B

2004-01-01

Toward the end of the nineteenth century a complex of problems related to ticks and tick-borne diseases of cattle created a demand for methods to control ticks and reduce losses of cattle. The discovery and use of arsenical solutions in dipping vats for treating cattle to protect them against ticks revolutionized tick and tick-borne disease control programmes. Arsenic dips for cattle were used for about 40 years before the evolution of resistance of ticks to the chemical, and the development and marketing of synthetic organic acaricides after World War II provided superior alternative products. Most of the major groups of organic pesticides are represented on the list of chemicals used to control ticks on cattle. Unfortunately, the successive evolution of resistance of ticks to acaricides in each chemical group with the concomitant reduction in the usefulness of a group of acaricides is a major reason for the diversity of acaricides. Whether a producer chooses a traditional method for treating cattle with an acaricide or uses a new method, he must recognize the benefits, limitations and potential problems with each application method and product. Simulation models and research were the basis of recommendations for tick control strategies advocating approaches that reduced reliance on acaricides. These recommendations for controlling ticks on cattle are in harmony with recommendations for reducing the rate of selection for acaricide resistance. There is a need to transfer knowledge about tick control and resistance mitigation strategies to cattle producers.

Escherichia coli O157:H7 in beef cattle: on farm contamination and pre-slaughter control methods.

PubMed

Soon, J M; Chadd, S A; Baines, R N

2011-12-01

This paper addresses food safety in beef cattle production, with particular emphasis on factors that affect the prevalence of Escherichia coli O157:H7 in beef cattle and on control methods that have been investigated. Product recalls and foodborne diseases due to this organism continue to occur even though control measures have been under investigation for over 20 years. Most meatborne outbreaks are due to improper food handling practices and consumption of undercooked meat. However, the majority of pathogenic bacteria that can spread at slaughter by cross-contamination can be traced back to the farm rather than originating from the slaughter plant. This would ideally require the adoption of rigorous on-farm intervention strategies to mitigate risks at the farm level. On-farm strategies to control and reduce E. coli O157:H7 at the farm level will reduce the risk of carcass contamination at slaughter and processing facilities although they will not eliminate E. coli O157:H7. The most successful strategy for reducing the risk of contamination of beef and beef products will involve the implementation of both pre- and post-harvest measures.

Theory! The Missing Link in Understanding the Performance of Neonate/Infant Home-Visiting Programs to Prevent Child Maltreatment: A Systematic Review

PubMed Central

Segal, Leonie; Sara Opie, Rachelle; Dalziel, Kim

2012-01-01

Context Home-visiting programs have been offered for more than sixty years to at-risk families of newborns and infants. But despite decades of experience with program delivery, more than sixty published controlled trials, and more than thirty published literature reviews, there is still uncertainty surrounding the performance of these programs. Our particular interest was the performance of home visiting in reducing child maltreatment. Methods We developed a program logic framework to assist in understanding the neonate/infant home-visiting literature, identified through a systematic literature review. We tested whether success could be explained by the logic model using descriptive synthesis and statistical analysis. Findings Having a stated objective of reducing child maltreatment—a theory or mechanism of change underpinning the home-visiting program consistent with the target population and their needs and program components that can deliver against the nominated theory of change—considerably increased the chance of success. We found that only seven of fifty-three programs demonstrated such consistency, all of which had a statistically significant positive outcome, whereas of the fifteen that had no match, none was successful. Programs with a partial match had an intermediate success rate. The relationship between program success and full, partial or no match was statistically significant. Conclusions Employing a theory-driven approach provides a new way of understanding the disparate performance of neonate/infant home-visiting programs. Employing a similar theory-driven approach could also prove useful in the review of other programs that embody a diverse set of characteristics and may apply to diverse populations and settings. A program logic framework provides a rigorous approach to deriving policy-relevant meaning from effectiveness evidence of complex programs. For neonate/infant home-visiting programs, it means that in developing these programs, attention to consistency of objectives, theory of change, target population, and program components is critical. PMID:22428693

A method for preparation and cleaning of uniformly sized arsenopyrite particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parthasarathy, Hariprasad; Baltrus, John P; Dzombak, David A

The oxidative dissolution of sulfide minerals, such as arsenopyrite (FeAsS), is of critical importance in many geochemical systems. A comprehensive understanding of their dissolution rates entails careful preparation of the mineral surface. Measurements of dissolution rates of arsenic from arsenopyrite are dependent on the size and degree of oxidation of its particles, among other factors. In this work, a method was developed for preparation and cleaning of arsenopyrite particles with size range of 150–250 μm. Four different cleaning methods were evaluated for effectiveness based on the removal of oxidized species of iron (Fe), arsenic (As) and sulfur (S) from themore » surface. The percentage oxidation of the surface was determined using X-ray photoelectron spectroscopy (XPS), and surface stoichiometry was measured using scanning electron microscopy – energy dispersive X-ray spectroscopy (SEM-EDS). Results indicate that sonicating the arsenopyrite particles and then cleaning them with 12N HCl followed by 50% ethanol, and drying in nitrogen was the most effective method. This method was successful in greatly reducing the oxide species of Fe while completely removing oxides of As and S from the arsenopyrite surface. Although sonication and acid cleaning have been widely used for mineral preparation, the method described in this study can significantly reduce grain size heterogeneity as well as surface oxidation, which enables greater control in surface and dissolution experiments.« less

A method for preparation and cleaning of uniformly sized arsenopyrite particles

DOE PAGES

Parthasarathy, Hariprasad; Baltrus, John P; Dzombak, David A; ...

2014-10-11

The oxidative dissolution of sulfide minerals, such as arsenopyrite (FeAsS), is of critical importance in many geochemical systems. A comprehensive understanding of their dissolution rates entails careful preparation of the mineral surface. Measurements of dissolution rates of arsenic from arsenopyrite are dependent on the size and degree of oxidation of its particles, among other factors. In this work, a method was developed for preparation and cleaning of arsenopyrite particles with size range of 150–250 μm. Four different cleaning methods were evaluated for effectiveness based on the removal of oxidized species of iron (Fe), arsenic (As) and sulfur (S) from themore » surface. The percentage oxidation of the surface was determined using X-ray photoelectron spectroscopy (XPS), and surface stoichiometry was measured using scanning electron microscopy – energy dispersive X-ray spectroscopy (SEM-EDS). Results indicate that sonicating the arsenopyrite particles and then cleaning them with 12N HCl followed by 50% ethanol, and drying in nitrogen was the most effective method. This method was successful in greatly reducing the oxide species of Fe while completely removing oxides of As and S from the arsenopyrite surface. Although sonication and acid cleaning have been widely used for mineral preparation, the method described in this study can significantly reduce grain size heterogeneity as well as surface oxidation, which enables greater control in surface and dissolution experiments.« less

High variance in reproductive success generates a false signature of a genetic bottleneck in populations of constant size: a simulation study

PubMed Central

2013-01-01

Background Demographic bottlenecks can severely reduce the genetic variation of a population or a species. Establishing whether low genetic variation is caused by a bottleneck or a constantly low effective number of individuals is important to understand a species’ ecology and evolution, and it has implications for conservation management. Recent studies have evaluated the power of several statistical methods developed to identify bottlenecks. However, the false positive rate, i.e. the rate with which a bottleneck signal is misidentified in demographically stable populations, has received little attention. We analyse this type of error (type I) in forward computer simulations of stable populations having greater than Poisson variance in reproductive success (i.e., variance in family sizes). The assumption of Poisson variance underlies bottleneck tests, yet it is commonly violated in species with high fecundity. Results With large variance in reproductive success (Vk ≥ 40, corresponding to a ratio between effective and census size smaller than 0.1), tests based on allele frequencies, allelic sizes, and DNA sequence polymorphisms (heterozygosity excess, M-ratio, and Tajima’s D test) tend to show erroneous signals of a bottleneck. Similarly, strong evidence of population decline is erroneously detected when ancestral and current population sizes are estimated with the model based method MSVAR. Conclusions Our results suggest caution when interpreting the results of bottleneck tests in species showing high variance in reproductive success. Particularly in species with high fecundity, computer simulations are recommended to confirm the occurrence of a population bottleneck. PMID:24131797

Four malaria success stories: how malaria burden was successfully reduced in Brazil, Eritrea, India, and Vietnam.

PubMed

Barat, Lawrence M

2006-01-01

While many countries struggle to control malaria, four countries, Brazil, Eritrea, India, and Vietnam, have successfully reduced malaria burden. To determine what led these countries to achieve impact, published and unpublished reports were reviewed and selected program and partner staff were interviewed to identify common factors that contributed to these successes. Common success factors included conducive country conditions, a targeted technical approach using a package of effective tools, data-driven decision-making, active leadership at all levels of government, involvement of communities, decentralized implementation and control of finances, skilled technical and managerial capacity at national and sub-national levels, hands-on technical and programmatic support from partner agencies, and sufficient and flexible financing. All these factors were essential in achieving success. If the goals of Roll Back Malaria are to be achieved, governments and their partners must take the lessons learned from these program successes and apply them in other affected countries.

Abstinence at Successful Discharge in Publicly Funded Addiction Health Services

PubMed Central

Guerrero, Erick G.; Kong, Yinfei; Kim, Tina

2016-01-01

Abstinence at successful discharge in substance use disorder treatment is important to reducing relapse rates and increasing long-term recovery from substance use disorders. However, few studies have examined abstinence as an essential component of successful discharge. This study examined rates and correlates of reported abstinence (nonuse of drugs 30 days prior to successful discharge) among clients attending publicly funded treatment in Los Angeles County, California. Finding show that only 36% of clients who were successfully discharged reported abstinence. Black clients were less likely than non-Hispanic Whites to report abstinence at successful discharge. Clients in methadone treatment programs were less likely than outpatient clients to report abstinence, whereas clients referred to treatment through the legal system (Proposition 36) were more likely to report abstinence compared to self-referred clients. Findings underscore the importance of systematic assessment of abstinence in determining successful discharge and provide a basis for further examination of strategies to improve abstinence and reduce relapse. PMID:26882909

Abstinence at Successful Discharge in Publicly Funded Addiction Health Services.

PubMed

Frimpong, Jemima A; Guerrero, Erick G; Kong, Yinfei; Kim, Tina

2016-10-01

Abstinence at successful discharge in substance use disorder treatment is important to reducing relapse rates and increasing long-term recovery from substance use disorders. However, few studies have examined abstinence as an essential component of successful discharge. This study examined rates and correlates of reported abstinence (nonuse of drugs 30 days prior to successful discharge) among clients attending publicly funded treatment in Los Angeles County, California. Finding show that only 36% of clients who were successfully discharged reported abstinence. Black clients were less likely than non-Hispanic Whites to report abstinence at successful discharge. Clients in methadone treatment programs were less likely than outpatient clients to report abstinence, whereas clients referred to treatment through the legal system (Proposition 36) were more likely to report abstinence compared to self-referred clients. Findings underscore the importance of systematic assessment of abstinence in determining successful discharge and provide a basis for further examination of strategies to improve abstinence and reduce relapse.

Endoscopic surgery and telemedicine in microgravity: developing contingency procedures for exploratory class spaceflight

NASA Technical Reports Server (NTRS)

Jones, J. A.; Johnston, S.; Campbell, M.; Miles, B.; Billica, R.

1999-01-01

OBJECTIVES: The risk of a urinary calculus during an extended duration mission into the reduced gravity environment of space is significant. For medical operations to develop a comprehensive strategy for the spaceflight stone risk, both preventive countermeasures and contingency management (CM) plans must be included. METHODS: A feasibility study was conducted to demonstrate the potential CM technique of endoscopic ureteral stenting with ultrasound guidance for the possible in-flight urinary calculus contingency. The procedure employed the International Space Station/Human Research Facility ultrasound unit for guide wire and stent localization, a flexible cystoscope for visual guidance, and banded, biocompatible soft ureteral stents to successfully stent porcine ureters bilaterally in zero gravity (0g). RESULTS: The study demonstrated that downlinked endoscopic surgical and ultrasound images obtained in 0g are comparable in quality to 1g images, and therefore are useful for diagnostic clinical utility via telemedicine transmission. CONCLUSIONS: In order to be successful, surgical procedures in 0g require excellent positional stability of the operating surgeon, assistant, and patient, relative to one another. The technological development of medical procedures for long-duration spaceflight contingencies may lead to improved terrestrial patient care methodology and subsequently reduced morbidity.

Retention Strategies for Health Disparities Preventive Trials: Findings from the Early Childhood Caries Collaborating Centers

PubMed Central

Garcia, Raul I.; Tiwari, Tamanna; Ramos-Gomez, Francisco; Heaton, Brenda; Orozco, Mario; Rasmussen, Margaret; Braun, Patricia; Henshaw, Michelle; Borrelli, Belinda; Albino, Judith; Vargas, Clemencia; Diamond, Courtney; Gebel, Christina; Batliner, Terrence S.; Barker, Judith; Gregorich, Steven; Gansky, Stuart A.

2017-01-01

Objectives To identify successful strategies for retention of participants in multi-year, community-based randomized controlled trials (RCTs) aiming to reduce early childhood caries in health disparities populations from diverse racial/ethnic backgrounds and across diverse geographic settings. Methods Four RCTs conducted by the Early Childhood Caries Collaborating Centers (EC4), an initiative of the National Institute of Dental and Craniofacial Research, systematically collected information on the success of various strategies implemented to promote participant retention in each RCT. The observational findings from this case series of four RCTs were tabulated and the strategies rated by study staff. Results Participant retention at 12 months of follow-up ranged from 52.8% to 91.7%, and at 24 months ranged from 53.6% to 85.9, across the four RCT. For the three RCT that had a 36 month follow-up, retention ranged from 53.6% to 85.1%. Effectiveness of different participant retention strategies varied widely across the RCT. Conclusions Findings from this case series study may help to guide the design of future RCTs to maximize retention of study participants and yield needed data on effective interventions to reduce oral health disparities. PMID:27759164

Study of gas tungsten arc welding procedures for tantalum alloy T-111 (Ta-8 W-2Hf) plate

NASA Technical Reports Server (NTRS)

Gold, R. E.; Kesterson, R. L.

1973-01-01

Methods of eliminating or reducing underbread cracking in multipass GTA welds in thick T-111 plate were studied. Single V butt welds prepared using experimental filler metal compositions and standard weld procedures resulted in only moderate success in reducing underbread cracking. Subsequent procedural changes incorporating manual welding, slower weld speeds, and three or fewer fill passes resulted in crack-free single V welds only when the filler metal was free of hafnium. The double V joint design with successive fill passes on opposite sides of the joint produced excellent welds. The quality of each weld was determined metallographically since the cracking, when present, was very slight and undetectable using standard NDT techniques. Tensile and bend tests were performed on selected weldments. The inherent filler metal strength and the joint geometry determined the strength of the weldment. Hardness and electron beam microprobe traverses were made on selected specimens with the result that significant filler metal-base metal dilution as well as hafnium segregation was detected. A tentative explanation of T-111 plate underbread cracking is presented based on the intrinsic effects of hafnium in the weldment.

Development of «Park-and-Ride» system as a tool for sustainable access control managing

NASA Astrophysics Data System (ADS)

Danilina, Nina; Vlasov, Denis

2017-10-01

Large cities, whereby people use private transport, are facing the same challenges related to traffic congestion, reliability of public transportation and parking demand. Managing urban traffic and transport has become the most relevant police in transport planning. The article deals with the potential for further implementation in Russian Federation of «Park-and- Ride» recognized as an essential part of the overall transport and parking offer and successful planning tool to reducing congestion for any urban area around the world. The studies have been carried out in Moscow acknowledged as the city core of Moscow agglomeration — the largest and most populous in Russia. The research aims to support for the development of «Park-and-Ride» system applying the methodical approach adapted by the authors for the study to make it relevant for cities. A three-steps access control is offered to reduce private cars use in the city center. The results of the studies shows that such traffic management tool can help successfully in balancing the traffic demand and supply and, consequently, in resolving transport congestion and the number of coherent social, urban and economic challenges addressed to the sustainable development of urban areas.

Synthetic Nucleic Acids and Treatment of Neurological Diseases.

PubMed

Corey, David R

2016-10-01

The ability to control gene expression with antisense oligonucleotides (ASOs) could provide a new treatment strategy for disease. To review the use of ASOs for the treatment of neurological disorders. Articles were identified through a search of PubMed references from 2000 to 2016 for articles describing the use of ASOs to treat disease, with specific attention to neurological disease. We concentrated our review on articles pertaining to activation of frataxin expression (Friedreich's ataxia) and production of active survival motor neuron 2 (SMN2, spinal muscular atrophy). Many neurological diseases are caused by inappropriate expression of a protein. Mutations may reduce expression of a wild-type protein, and strategies to activate expression may provide therapeutic benefit. For other diseases, a mutant protein may be expressed too highly and methods that reduce mutant protein expression might form the basis for drug development. Synthetic ASOs can recognize cellular RNA and control gene expression. Antisense oligonucleotides are not a new concept, but successful clinical development has proceeded at a slow pace. Advances in ASO chemistry, biological understanding, and clinical design are making successful applications more likely. Both laboratory and clinical studies are demonstrating the potential of ASOs as a source of drugs to treat neurological disease.

Clustering methods for the optimization of atomic cluster structure

NASA Astrophysics Data System (ADS)

Bagattini, Francesco; Schoen, Fabio; Tigli, Luca

2018-04-01

In this paper, we propose a revised global optimization method and apply it to large scale cluster conformation problems. In the 1990s, the so-called clustering methods were considered among the most efficient general purpose global optimization techniques; however, their usage has quickly declined in recent years, mainly due to the inherent difficulties of clustering approaches in large dimensional spaces. Inspired from the machine learning literature, we redesigned clustering methods in order to deal with molecular structures in a reduced feature space. Our aim is to show that by suitably choosing a good set of geometrical features coupled with a very efficient descent method, an effective optimization tool is obtained which is capable of finding, with a very high success rate, all known putative optima for medium size clusters without any prior information, both for Lennard-Jones and Morse potentials. The main result is that, beyond being a reliable approach, the proposed method, based on the idea of starting a computationally expensive deep local search only when it seems worth doing so, is capable of saving a huge amount of searches with respect to an analogous algorithm which does not employ a clustering phase. In this paper, we are not claiming the superiority of the proposed method compared to specific, refined, state-of-the-art procedures, but rather indicating a quite straightforward way to save local searches by means of a clustering scheme working in a reduced variable space, which might prove useful when included in many modern methods.

Rapid detection of coliforms in drinking water of Arak city using multiplex PCR method in comparison with the standard method of culture (Most Probably Number)

PubMed Central

Fatemeh, Dehghan; Reza, Zolfaghari Mohammad; Mohammad, Arjomandzadegan; Salomeh, Kalantari; Reza, Ahmari Gholam; Hossein, Sarmadian; Maryam, Sadrnia; Azam, Ahmadi; Mana, Shojapoor; Negin, Najarian; Reza, Kasravi Alii; Saeed, Falahat

2014-01-01

Objective To analyse molecular detection of coliforms and shorten the time of PCR. Methods Rapid detection of coliforms by amplification of lacZ and uidA genes in a multiplex PCR reaction was designed and performed in comparison with most probably number (MPN) method for 16 artificial and 101 field samples. The molecular method was also conducted on isolated coliforms from positive MPN samples; standard sample for verification of microbial method certificated reference material; isolated strains from certificated reference material and standard bacteria. The PCR and electrophoresis parameters were changed for reducing the operation time. Results Results of PCR for lacZ and uidA genes were similar in all of standard, operational and artificial samples and showed the 876 bp and 147 bp bands of lacZ and uidA genes by multiplex PCR. PCR results were confirmed by MPN culture method by sensitivity 86% (95% CI: 0.71-0.93). Also the total execution time, with a successful change of factors, was reduced to less than two and a half hour. Conclusions Multiplex PCR method with shortened operation time was used for the simultaneous detection of total coliforms and Escherichia coli in distribution system of Arak city. It's recommended to be used at least as an initial screening test, and then the positive samples could be randomly tested by MPN. PMID:25182727

Visible light responsive Cu2MoS4 nanosheets incorporated reduced graphene oxide for efficient degradation of organic pollutant

NASA Astrophysics Data System (ADS)

Rameshbabu, R.; Vinoth, R.; Navaneethan, M.; Harish, S.; Hayakawa, Y.; Neppolian, B.

2017-10-01

Visible light active copper molybdenum sulfide (Cu2MoS4) nanosheets were successfully anchored on reduced graphene oxide (rGO) using facile hydrothermal method. During the hydrothermal reaction, reduction of graphene oxide into rGO and the formation of Cu2MoS4 nanosheets were successfully obtained. The charge transfer interaction between the rGO sheets and Cu2MoS4 nanosheets extended the absorption to visible region in comparison with bare Cu2MoS4 nanosheets i.e without rGO sheets. Furthermore, the notable photoluminescence quenching observed for Cu2MoS4/rGO nanocomposite revealed the effective role of rGO towards the significant inhibition of electron-hole pair recombination. The photocatalytic efficiencies of bare Cu2MoS4 and Cu2MoS4/rGO nanocomposite was evaluated for the degradation of methyl orange dye under visible irradiation (λ > 420 nm). A maximum photodegradation efficiency of 99% was achieved for Cu2MoS4/rGO nanocomposite, while only 64% photodegradation was noted for bare Cu2MoS4. The enhanced optical absorption in visible region, high surface area, and low charge carrier recombination in the presence of rGO sheets were the main reasons for the enhancement in photodegardation of MO dye. In addition, the resultant Cu2MoS4/rGO nanocomposite was found to be reusable for five successive cycles without significant loss in its photocatalytic performance.

Recent advances in lithotripsy technology and treatment strategies: A systematic review update

PubMed Central

Elmansy, H.E.; Lingeman, J.E.

2017-01-01

Introduction Shock wave lithotripsy (SWL) is a well – established treatment option for urolithiasis. The technology of SWL has undergone significant changes in an attempt to better optimize the results while reducing failure rates. There are some important limitations that restrict the use of SWL. In this review, we aim to place these advantages and limitations in perspective, assess the current role of SWL, and discuss recent advances in lithotripsy technology and treatment strategies. Methods A comprehensive review was conducted to identify studies reporting outcomes on ESWL. We searched for literature (PubMed, Embase, Medline) that focused on the physics of shock waves, theories of stone disintegration, and studies on optimising shock wave application. Relevant articles in English published since 1980 were selected for inclusion. Results Efficacy has been shown to vary between lithotripters. To maximize stone fragmentation and reduce failure rates, many factors can be optimized. Factors to consider in proper patient selection include skin – to – stone distance and stone size. Careful attention to the rate of shock wave administration, proper coupling of the treatment head to the patient have important influences on the success of lithotripsy. Conclusion Proper selection of patients who are expected to respond well to SWL, as well as attention to the technical aspects of the procedure are the keys to SWL success. Studies aiming to determine the mechanisms of shock wave action in stone breakage have begun to suggest new treatment strategies to improve success rates and safety. PMID:27890653

Hatching success and predation of Bog Turtle (Glyptemys muhlenbergii) eggs in New Jersey and Pennsylvania

USGS Publications Warehouse

Zappalorti, Robert T.; Tutterow, Annalee M.; Pittman, Shannon E.; Lovich, Jeffrey E.

2017-01-01

Nest-site selection by most turtles affects the survival of females and their offspring. Although bog turtles (Glyptemys muhlenbergii) do not typically leave their wetlands for nesting, nest-site selection can impact hatching success and hatchling survival. Between 1974 and 2012, we monitored the fates of 258 bog turtle eggs incubated in the field and 91 eggs incubated under laboratory conditions from 11 different bogs, fens, or wetland complexes in New Jersey and Pennsylvania. Laboratory-incubated eggs exhibited the greatest hatching success (81%), but we did not detect a significant difference in hatching success between nests protected with predator excluder cages (43%) and unprotected nests (33%). However, we found significantly lower predation rates in protected nests, suggesting that while predator excluder cages successfully reduced predation, other environmental factors persisted to reduce egg survival in the field. Natural hatching success was potentially reduced by poor weather conditions, which may have resulted in embryo developmental problems, dehydration, or embryos drowning in the egg. Our results suggest that egg depredation, coupled with embryo developmental problems and infertility, are limiting factors to hatching success in our study populations. Using predator excluder cages to protect bog turtle eggs in the field, or incubating eggs in the laboratory and releasing hatchlings at original nesting areas, may be an effective conservation tool for recovering populations of this federally threatened species.

Efficacy of plastic mesh tubes in reducing herbivory damage by the invasive nutria (Myocastor coypus) in an urban restoration site

USGS Publications Warehouse

Sheffels, Trevor R.; Systma, Mark D.; Carter, Jacoby; Taylor, Jimmy D.

2014-01-01

The restoration of stream corridors is becoming an increasingly important component of urban landscape planning, and the high cost of these projects necessitates the need to understand and address potential ecological obstacles to project success. The nutria(Myocastor coypus) is an invasive, semi-aquatic rodent native to South America that causes detrimental ecological impacts in riparian and wetland habitats throughout its introduced range, and techniques are needed to reduce nutria herbivory damage to urban stream restoration projects. We assessed the efficacy of standard Vexar® plastic mesh tubes in reducing nutria herbivory damage to newly established woody plants. The study was conducted in winter-spring 2009 at Delta Ponds, a 60-ha urban waterway in Eugene, Oregon. Woody plants protected by Vexar® tubes demonstrated 100% survival over the 3-month initial establishment period, while only 17% of unprotected plantings survived. Nutria demonstrated a preference for black cottonwood (Populus balsamifera ssp trichocarpa) over red osier dogwood (Cornussericea) and willow (Salix spp). Camera surveillance showed that nutria were more active in unprotected rather than protected treatments. Our results suggest that Vexar® plastic mesh tubing can be an effective short-term herbivory mitigation tool when habitat use by nutria is low. Additionally, planting functionally equivalent woody plant species that are less preferred by nutria, and other herbivores, may be another method for reducing herbivory and improving revegetation success. This study highlights the need to address potential wildlife damage conflicts in the planning process for stream restoration in urban landscapes.

[Effective size of subpopulations in early-run sockeye salmon Oncorhynchus nerka from Azabach'e Lake (Kamchatka): the effect of relative reproductive success of different-year cohorts].

PubMed

Efremov, V V

2004-05-01

The effect of variation in reproductive success of cohorts of different year of birth (within generation) on the effective subpopulation (breeding group) size in early-run sockeye salmon Oncorhynchus nerka from Azabach'e Lake (Kamchatka). The annual variation in census size and overlapping of year classes reduced the ratio of the effective subpopulation size to the census size by 7 to 88% in different subpopulations. The total effect of the variance of reproductive success in individual years and the variance of reproductive success of different cohorts reduced the effective size/census size ratio by 68-96%.

The effects of plastic waves on the numerical convergence of the viscous-plastic and elastic-viscous-plastic sea-ice models

NASA Astrophysics Data System (ADS)

Williams, James; Tremblay, L. Bruno; Lemieux, Jean-François

2017-07-01

The plastic wave speed is derived from the linearized 1-D version of the widely used viscous-plastic (VP) and elastic-viscous-plastic (EVP) sea-ice models. Courant-Friedrichs-Lewy (CFL) conditions are derived using the propagation speed of the wave. 1-D numerical experiments of the VP, EVP and EVP* models successfully recreate a reference solution when the CFL conditions are satisfied, in agreement with the theory presented. The IMplicit-EXplicit (IMEX) method is shown to effectively alleviate the plastic wave CFL constraint on the timestep in the implicitly solved VP model in both 1-D and 2-D. In 2-D, the EVP and EVP* models show first order error in the simulated velocity field when the plastic wave is not resolved. EVP simulations are performed with various advective timestep, number of subcycles, and elastic-wave damping timescales. It is found that increasing the number of subcycles beyond that needed to resolve the elastic wave does not improve the quality of the solution. It is found that reducing the elastic wave damping timescale reduces the spatial extent of first order errors cause by the unresolved plastic wave. Reducing the advective timestep so that the plastic wave is resolved also reduces the velocity error in terms of magnitude and spatial extent. However, the parameter set required for convergence to within the error bars of satellite (RGPS) deformation fields is impractical for use in climate model simulations. The behavior of the EVP* method is analogous to that of the EVP method except that it is not possible to reduce the damping timescale with α = β.

Numerical simulations of electrohydrodynamic evolution of thin polymer films

NASA Astrophysics Data System (ADS)

Borglum, Joshua Christopher

Recently developed needleless electrospinning and electrolithography are two successful techniques that have been utilized extensively for low-cost, scalable, and continuous nano-fabrication. Rational understanding of the electrohydrodynamic principles underneath these nano-manufacturing methods is crucial to fabrication of continuous nanofibers and patterned thin films. This research project is to formulate robust, high-efficiency finite-difference Fourier spectral methods to simulate the electrohydrodynamic evolution of thin polymer films. Two thin-film models were considered and refined. The first was based on reduced lubrication theory; the second further took into account the effect of solvent drying and dewetting of the substrate. Fast Fourier Transform (FFT) based spectral method was integrated into the finite-difference algorithms for fast, accurately solving the governing nonlinear partial differential equations. The present methods have been used to examine the dependencies of the evolving surface features of the thin films upon the model parameters. The present study can be used for fast, controllable nanofabrication.

RNAi-mediated silencing of MAP kinase signalling genes (Fmk1, Hog1, and Pbs2) in Fusarium oxysporum reduces pathogenesis on tomato plants.

PubMed

Pareek, Manish; Rajam, Manchikatla Venkat

2017-09-01

Fusarium oxysporum is a soil-borne plant fungal pathogen, and causes colossal losses in several crop plants including tomato. Effective control measures include the use of harmful fungicides and resistant cultivars, but these methods have shown limited success. Conventional methods to validate fungal pathogenic genes are labour intensive. Therefore, an alternative strategy is required to efficiently characterize unknown pathogenic genes. RNA interference (RNAi) has emerged as a potential tool to functionally characterize novel fungal pathogenic genes and also to control fungal diseases. Here, we report an efficient method to produce stable RNAi transformants of F. oxysporum using Agrobacterium-mediated transformation (AMT). We have transformed F. oxysporum spores using RNAi constructs of Fmk1, Hog1, and Pbs2 MAP kinase signalling genes. Fmk1 RNAi fungal transformants showed loss of surface hydrophobicity, reduced invasive growth on tomato fruits and hypo-virulence on tomato seedlings. Hog1 and Pbs2 RNAi transformants showed altered conidial size, and reduced invasive growth and pathogenesis. These results showed that AMT using RNAi constructs is an effective approach for dissecting the role of genes involved in pathogenesis in F. oxysporum and this could be extended for other fungal systems. The obtained knowledge can be easily translated for developing fungal resistant crops by RNAi. Copyright © 2017 British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Pharmacophore-Based Similarity Scoring for DOCK

PubMed Central

2015-01-01

Pharmacophore modeling incorporates geometric and chemical features of known inhibitors and/or targeted binding sites to rationally identify and design new drug leads. In this study, we have encoded a three-dimensional pharmacophore matching similarity (FMS) scoring function into the structure-based design program DOCK. Validation and characterization of the method are presented through pose reproduction, crossdocking, and enrichment studies. When used alone, FMS scoring dramatically improves pose reproduction success to 93.5% (∼20% increase) and reduces sampling failures to 3.7% (∼6% drop) compared to the standard energy score (SGE) across 1043 protein–ligand complexes. The combined FMS+SGE function further improves success to 98.3%. Crossdocking experiments using FMS and FMS+SGE scoring, for six diverse protein families, similarly showed improvements in success, provided proper pharmacophore references are employed. For enrichment, incorporating pharmacophores during sampling and scoring, in most cases, also yield improved outcomes when docking and rank-ordering libraries of known actives and decoys to 15 systems. Retrospective analyses of virtual screenings to three clinical drug targets (EGFR, IGF-1R, and HIVgp41) using X-ray structures of known inhibitors as pharmacophore references are also reported, including a customized FMS scoring protocol to bias on selected regions in the reference. Overall, the results and fundamental insights gained from this study should benefit the docking community in general, particularly researchers using the new FMS method to guide computational drug discovery with DOCK. PMID:25229837

A robust method for RNA extraction and purification from a single adult mouse tendon.

PubMed

Grinstein, Mor; Dingwall, Heather L; Shah, Rishita R; Capellini, Terence D; Galloway, Jenna L

2018-01-01

Mechanistic understanding of tendon molecular and cellular biology is crucial toward furthering our abilities to design new therapies for tendon and ligament injuries and disease. Recent transcriptomic and epigenomic studies in the field have harnessed the power of mouse genetics to reveal new insights into tendon biology. However, many mouse studies pool tendon tissues or use amplification methods to perform RNA analysis, which can significantly increase the experimental costs and limit the ability to detect changes in expression of low copy transcripts. Single Achilles tendons were harvested from uninjured, contralateral injured, and wild type mice between three and five months of age, and RNA was extracted. RNA Integrity Number (RIN) and concentration were determined, and RT-qPCR gene expression analysis was performed. After testing several RNA extraction approaches on single adult mouse Achilles tendons, we developed a protocol that was successful at obtaining high RIN and sufficient concentrations suitable for RNA analysis. We found that the RNA quality was sensitive to the time between tendon harvest and homogenization, and the RNA quality and concentration was dependent on the duration of homogenization. Using this method, we demonstrate that analysis of Scx gene expression in single mouse tendons reduces the biological variation caused by pooling tendons from multiple mice. We also show successful use of this approach to analyze Sox9 and Col1a2 gene expression changes in injured compared with uninjured control tendons. Our work presents a robust, cost-effective, and straightforward method to extract high quality RNA from a single adult mouse Achilles tendon at sufficient amounts for RT-qPCR as well as RNA-seq. We show this can reduce variation and decrease the overall costs associated with experiments. This approach can also be applied to other skeletal tissues, as well as precious human samples.

SU-E-T-329: Dosimetric Impact of Implementing Metal Artifact Reduction Methods and Metal Energy Deposition Kernels for Photon Dose Calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, J; Followill, D; Howell, R

2015-06-15

Purpose: To investigate two strategies for reducing dose calculation errors near metal implants: use of CT metal artifact reduction methods and implementation of metal-based energy deposition kernels in the convolution/superposition (C/S) method. Methods: Radiochromic film was used to measure the dose upstream and downstream of titanium and Cerrobend implants. To assess the dosimetric impact of metal artifact reduction methods, dose calculations were performed using baseline, uncorrected images and metal artifact reduction Methods: Philips O-MAR, GE’s monochromatic gemstone spectral imaging (GSI) using dual-energy CT, and GSI imaging with metal artifact reduction software applied (MARs).To assess the impact of metal kernels, titaniummore » and silver kernels were implemented into a commercial collapsed cone C/S algorithm. Results: The CT artifact reduction methods were more successful for titanium than Cerrobend. Interestingly, for beams traversing the metal implant, we found that errors in the dimensions of the metal in the CT images were more important for dose calculation accuracy than reduction of imaging artifacts. The MARs algorithm caused a distortion in the shape of the titanium implant that substantially worsened the calculation accuracy. In comparison to water kernel dose calculations, metal kernels resulted in better modeling of the increased backscatter dose at the upstream interface but decreased accuracy directly downstream of the metal. We also found that the success of metal kernels was dependent on dose grid size, with smaller calculation voxels giving better accuracy. Conclusion: Our study yielded mixed results, with neither the metal artifact reduction methods nor the metal kernels being globally effective at improving dose calculation accuracy. However, some successes were observed. The MARs algorithm decreased errors downstream of Cerrobend by a factor of two, and metal kernels resulted in more accurate backscatter dose upstream of metals. Thus, these two strategies do have the potential to improve accuracy for patients with metal implants in certain scenarios. This work was supported by Public Health Service grants CA 180803 and CA 10953 awarded by the National Cancer Institute, United States of Health and Human Services, and in part by Mobius Medical Systems.« less

Cost and cost-effectiveness of community based and health facility based directly observed treatment of tuberculosis in Dar es Salaam, Tanzania

PubMed Central

Wandwalo, Eliud; Robberstad, Bjarne; Morkve, Odd

2005-01-01

Background Identifying new approaches to tuberculosis treatment that are effective and put less demand to meagre health resources is important. One such approach is community based direct observed treatment (DOT). The purpose of the study was to determine the cost and cost effectiveness of health facility and community based directly observed treatment of tuberculosis in an urban setting in Tanzania. Methods Two alternative strategies were compared: health facility based directly observed treatment by health personnel and community based directly observed treatment by treatment supervisors. Costs were analysed from the perspective of health services, patients and community in the year 2002 in US $ using standard methods. Treatment outcomes were obtained from a randomised-controlled trial which was conducted alongside the cost study. Smear positive, smear negative and extra-pulmonary TB patients were included. Cost-effectiveness was calculated as the cost per patient successfully treated. Results The total cost of treating a patient with conventional health facility based DOT and community based DOT were $ 145 and $ 94 respectively. Community based DOT reduced cost by 35%. Cost fell by 27% for health services and 72% for patients. When smear positive and smear negative patients were considered separately, community DOT was associated with 45% and 19% reduction of the costs respectively. Patients used about $ 43 to follow their medication to health facility which is equivalent to their monthly income. Indirect costs were as important as direct costs, contributing to about 49% of the total patient's cost. The main reason for reduced cost was fewer number of visits to the TB clinic. Community based DOT was more cost-effective at $ 128 per patient successfully treated compared to $ 203 for a patient successfully treated with health facility based DOT. Conclusion Community based DOT presents an economically attractive option to complement health facility based DOT. This is particularly important in settings where TB clinics are working beyond capacity under limited resources. PMID:16018806

Enhanced photovoltaic performance of CdS-sensitized inverted organic solar cells prepared via a successive ionic layer adsorption and reaction method

NASA Astrophysics Data System (ADS)

Oleiwi, Hind Fadhil; Zakaria, Azmi; Yap, Chi Chin; Abbas, Haidr Abdulzahra; Tan, Sin Tee; Lee, Hock Beng; Tan, Chun Hui; Ginting, Riski Titian; Alshanableh, Abdelelah; Talib, Zainal Abidin

2017-05-01

One-dimensional ZnO nanorods (ZNRs) synthesized on fluorine-doped tin oxide (FTO) glass by hydrothermal method were modified with cadmium sulfide quantum dots (CdS QDs) as an electron transport layer (ETL) in order to enhance the photovoltaic performance of inverted organic solar cell (IOSC). In present study, CdS QDs were deposited on ZNRs using a Successive Ionic Layer Adsorption and Reaction method (SILAR) method. In typical procedures, IOSCs were fabricated by spin-coating the P3HT:PC61BM photoactive layer onto the as-prepared ZNRs/CdS QDs. The results of current-voltage (I-V) measurement under illumination shows that the FTO/ZNRs/CdS QDs/ P3HT:PC61BM/ PEDOT: PSS/Ag IOSC achieved a higher power conversion efficiency (4.06 %) in comparison to FTO/ZNRs/P3HT:PC61BM/PEDOT: PSS/Ag (3.6 %). Our findings suggest that the improved open circuit voltage (Voc) and short circuit current density (Jsc) of ZNRs/CdS QDs devices could be attributed to enhanced electron selectivity and reduced interfacial charge carrier recombination between ZNRs and P3HT:PC61BM after the deposition of CdS QDs. The CdS QDs sensitized ZNRs reported herein exhibit great potential for advanced optoelectronic application.

A robust multifactor dimensionality reduction method for detecting gene-gene interactions with application to the genetic analysis of bladder cancer susceptibility

PubMed Central

Gui, Jiang; Andrew, Angeline S.; Andrews, Peter; Nelson, Heather M.; Kelsey, Karl T.; Karagas, Margaret R.; Moore, Jason H.

2010-01-01

A central goal of human genetics is to identify and characterize susceptibility genes for common complex human diseases. An important challenge in this endeavor is the modeling of gene-gene interaction or epistasis that can result in non-additivity of genetic effects. The multifactor dimensionality reduction (MDR) method was developed as machine learning alternative to parametric logistic regression for detecting interactions in absence of significant marginal effects. The goal of MDR is to reduce the dimensionality inherent in modeling combinations of polymorphisms using a computational approach called constructive induction. Here, we propose a Robust Multifactor Dimensionality Reduction (RMDR) method that performs constructive induction using a Fisher’s Exact Test rather than a predetermined threshold. The advantage of this approach is that only those genotype combinations that are determined to be statistically significant are considered in the MDR analysis. We use two simulation studies to demonstrate that this approach will increase the success rate of MDR when there are only a few genotype combinations that are significantly associated with case-control status. We show that there is no loss of success rate when this is not the case. We then apply the RMDR method to the detection of gene-gene interactions in genotype data from a population-based study of bladder cancer in New Hampshire. PMID:21091664

Stochastic Methods for Aircraft Design

NASA Technical Reports Server (NTRS)

Pelz, Richard B.; Ogot, Madara

1998-01-01

The global stochastic optimization method, simulated annealing (SA), was adapted and applied to various problems in aircraft design. The research was aimed at overcoming the problem of finding an optimal design in a space with multiple minima and roughness ubiquitous to numerically generated nonlinear objective functions. SA was modified to reduce the number of objective function evaluations for an optimal design, historically the main criticism of stochastic methods. SA was applied to many CFD/MDO problems including: low sonic-boom bodies, minimum drag on supersonic fore-bodies, minimum drag on supersonic aeroelastic fore-bodies, minimum drag on HSCT aeroelastic wings, FLOPS preliminary design code, another preliminary aircraft design study with vortex lattice aerodynamics, HSR complete aircraft aerodynamics. In every case, SA provided a simple, robust and reliable optimization method which found optimal designs in order 100 objective function evaluations. Perhaps most importantly, from this academic/industrial project, technology has been successfully transferred; this method is the method of choice for optimization problems at Northrop Grumman.

Estimation of the absorption coefficients of two-layered media by a simple method using spatially and time-resolved reflectances

NASA Astrophysics Data System (ADS)

Shimada, M.; Sato, C.; Hoshi, Y.; Yamada, Y.

2009-08-01

Our newly developed method using spatially and time-resolved reflectances can easily estimate the absorption coefficients of each layer in a two-layered medium if the thickness of the upper layer and the reduced scattering coefficients of the two layers are known a priori. We experimentally validated this method using phantoms and examined its possibility of estimating the absorption coefficients of the tissues in human heads. In the case of a homogeneous plastic phantom (polyacetal block), the absorption coefficient estimated by our method agreed well with that obtained by a conventional method. Also, in the case of two-layered phantoms, our method successfully estimated the absorption coefficients of the two layers. Furthermore, the absorption coefficients of the extracerebral and cerebral tissue inside human foreheads were estimated under the assumption that the human heads were two-layered media. It was found that the absorption coefficients of the cerebral tissues were larger than those of the extracerebral tissues.

A new low-cost procedure for detecting nucleic acids in low-incidence samples: a case study of detecting spores of Paenibacillus larvae from bee debris.

PubMed

Ryba, Stepan; Kindlmann, Pavel; Titera, Dalibor; Haklova, Marcela; Stopka, Pavel

2012-10-01

American foulbrood, because of its virulence and worldwide spread, is currently one of the most dangerous diseases of honey bees. Quick diagnosis of this disease is therefore vitally important. For its successful eradication, however, all the hives in the region must be tested. This is time consuming and costly. Therefore, a fast and sensitive method of detecting American foulbrood is needed. Here we present a method that significantly reduces the number of tests needed by combining batches of samples from different hives. The results of this method were verified by testing each sample. A simulation study was used to compare the efficiency of the new method with testing all the samples and to develop a decision tool for determining when best to use the new method. The method is suitable for testing large numbers of samples (over 100) when the incidence of the disease is low (10% or less).

System analysis of plasma centrifuges and sputtering

NASA Technical Reports Server (NTRS)

Hong, S. H.

1978-01-01

System analyses of cylindrical plasma centrifuges are presented, for which the velocity field and electromagnetic fields are calculated. The effects of different electrode geometrics, induced magnetic fields, Hall-effect, and secondary flows are discussed. It is shown that speeds of 10000 m/sec can be achieved in plasma centrifuges, and that an efficient separation of U238 and U235 in uranium plasmas is feasible. The external boundary-value problem for the deposition of sputtering products is reduced to a Fredholm integral equation, which is solved analytically by means of the method of successive approximations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bueno, G.; Ruiz, M.; Sanchez, S

Breast cancer continues to be an important health problem between women population. Early detection is the only way to improve breast cancer prognosis and significantly reduce women mortality. It is by using CAD systems that radiologist can improve their ability to detect, and classify lesions in mammograms. In this study the usefulness of using B-spline based on a gradient scheme and compared to wavelet and adaptative filtering has been investigated for calcification lesion detection and as part of CAD systems. The technique has been applied to different density tissues. A qualitative validation shows the success of the method.

Advanced materials for aircraft engine applications.

PubMed

Backman, D G; Williams, J C

1992-02-28

A review of advances for aircraft engine structural materials and processes is presented. Improved materials, such as superalloys, and the processes for making turbine disks and blades have had a major impact on the capability of modern gas turbine engines. New structural materials, notably composites and intermetallic materials, are emerging that will eventually further enhance engine performance, reduce engine weight, and thereby enable new aircraft systems. In the future, successful aerospace manufacturers will combine product design and materials excellence with improved manufacturing methods to increase production efficiency, enhance product quality, and decrease the engine development cycle time.

Supersonic transport grid generation, validation, and optimization

NASA Technical Reports Server (NTRS)

Aaronson, Philip G.

1995-01-01

The ever present demand for reduced flight times has renewed interest in High Speed Civil Transports (HSCT). The need for an HSCT becomes especially apparent when the long distance, over-sea, high growth Pacific rim routes are considered. Crucial to any successful HSCT design are minimal environmental impact and economic viability. Vital is the transport's aerodynamic efficiency, ultimately effecting both the environmental impact and the operating cost. Optimization, including numerical optimization, coupled with the use of computational fluid dynamics (CFD) technology, has and will offer a significant improvement beyond traditional methods.

New double-byte error-correcting codes for memory systems

NASA Technical Reports Server (NTRS)

Feng, Gui-Liang; Wu, Xinen; Rao, T. R. N.

1996-01-01

Error-correcting or error-detecting codes have been used in the computer industry to increase reliability, reduce service costs, and maintain data integrity. The single-byte error-correcting and double-byte error-detecting (SbEC-DbED) codes have been successfully used in computer memory subsystems. There are many methods to construct double-byte error-correcting (DBEC) codes. In the present paper we construct a class of double-byte error-correcting codes, which are more efficient than those known to be optimum, and a decoding procedure for our codes is also considered.

Synthesis and characterization of nano-hydroxyapatite using Sapindus Mukorossi extract

NASA Astrophysics Data System (ADS)

Subha, B.; Prasath, P. Varun; Abinaya, R.; Kavitha, R. J.; Ravichandran, K.

2015-06-01

Nano-Hydroxyapatite (HAP) powders were successfully synthesised by hydrothermal method using Sapindus Mukorossi extract as an additive. The structural and morphological analyses of thus synthesised powders were carried out using FT-IR, XRD and FESEM/EDX. The FT-IR spectra confirm the presence of phosphate and hydroxyl groups corresponding to HAP. The XRD analysis reveals the formation of HAP phase and found to reduce the crystallite size with addition of Sapindus Mukorossi extract. The morphology changes from sphere to flake shape by the influence of extract.

A Method of Successive Corrections of the Control Subspace in the Reduced-Order Variational Data Assimilation

DTIC Science & Technology

2009-02-01

Evensen, G., 2003: The ensemble Kalman filter : Theoretical formulation and practical implementation. Ocean Dyn., 53, 343–357, doi:10.1007/s10236-003...0036-9. ——, 2006: Data Assimilation: The Ensemble Kalman Filter . Springer, 288 pp. Fang, F., C. C. Pain, I. M. Navon, G. J. Gorman, M. D. Piggott, P. A...E. J. Kostelich, M. Corazza, E. Kalnay, and D. J. Patil, 2004: A local ensemble Kalman filter for atmospheric data assimilation. Tellus, 56A, 415–428

Electronic dental records: start taking the steps.

PubMed

Bergoff, Jana

2011-01-01

Converting paper patient records charts into their electronic counterparts (EDRs) not only has many advantages, but also could become a legal requirement in the future. Several steps key to a successful transition includes assessing the needs of the dental team and what they require as a part of the implementation Existing software and hardware must be evaluated for continued use and expansion. Proper protocols for information transfer must be established to ensure complete records while maintaining HIPAA regulations regarding patient privacy. Reduce anxiety by setting realistic dead-lines and using trusted back-up methods.

Twenty Years of Endodontic Success and Failure at West Virginia University.

DTIC Science & Technology

1982-01-01

Analysis of Success and Failure - Apical Termination of Filling Material ........... 21 7 Analysis of Success and Failure - Posttreatment Restoration...system with healthy periapical and periodontal tissues. The dentist must reduce or eliminate toxic or irritating substances from within the root canals to...adequate for evaluating endodontic success and that success should be based on the radiographic presence of a periodontal membrane space of approximately

On the reproductive success of early-generation hatchery fish in the wild

PubMed Central

Christie, Mark R; Ford, Michael J; Blouin, Michael S

2014-01-01

Large numbers of hatchery salmon spawn in wild populations each year. Hatchery fish with multiple generations of hatchery ancestry often have heritably lower reproductive success than wild fish and may reduce the fitness of an entire population. Whether this reduced fitness also occurs for hatchery fish created with local- and predominantly wild-origin parents remains controversial. Here, we review recent studies on the reproductive success of such ‘early-generation’ hatchery fish that spawn in the wild. Combining 51 estimates from six studies on four salmon species, we found that (i) early-generation hatchery fish averaged only half the reproductive success of their wild-origin counterparts when spawning in the wild, (ii) the reduction in reproductive success was more severe for males than for females, and (iii) all species showed reduced fitness due to hatchery rearing. We review commonalities among studies that point to possible mechanisms (e.g., environmental versus genetic effects). Furthermore, we illustrate that sample sizes typical of these studies result in low statistical power to detect fitness differences unless the differences are substantial. This review demonstrates that reduced fitness of early-generation hatchery fish may be a general phenomenon. Future research should focus on determining the causes of those fitness reductions and whether they lead to long-term reductions in the fitness of wild populations. PMID:25469167

Factors associated with smoking cessation success in Lebanon

PubMed Central

2018-01-01

Objective: The objective is to assess factors associated with the success rate of smoking cessation among Lebanese smokers in a smoking cessation center. Methods: A cross-sectional data study, conducted between March 2014 and March 2016 in an outpatient smoking cessation center with 156 enrolled patients. The patient’s nicotine dependence and motivation to quit smoking were evaluated according to the Fagerstrom Test for Nicotine Dependence and Richmond tests respectively. Results: The number of packs smoked per year decreased the odds of smoking cessation success (p=0.004, ORa=0.982, CI 0.97-0.994), while the compliance with the offered treatment increased the odds of success by 7.68 times (p<0.001, ORa=7.68, CI 3.438-17.187). Highly dependent and highly motivated smokers had more success in the quitting process compared to those with a lower dependence and motivation respectively. Conclusion: Our findings showed that many factors can influence smoking cessation, an experience described as difficult, most significantly the number of packs per year and compliance with the smoking cessation treatment. Moreover, although these outcomes are not representative of the entire Lebanese population, we believe that health authorities could utilize these results when implementing upcoming smoking cessations programs. All attempts at cessation should have a goal of reducing the number of packs smoked per year to improve the chances of ceasing into the future. PMID:29619139

Continuous prostaglandin-F 2 infusion for middle-trimester abortion.

PubMed

Lauersen, N H; Wilson, K H

1973-05-26

Induction of midtrimester abortion with a continuous intravenous infusion of prostaglandin (PG) was described by Karim and Filshie and Roth-Brandel et al. in 1970, but the effective dose of PGF2alpha was associated with side effects severely limiting clinical usefulness. Karim and Sharma induced abortion by intravaginal PG, but again this route also seemed complicated by severe side effects. Independent reports followed of successful induction of midtrimester abortion by intraamniotic PGF2alpha and PGE2 with few side effects. Although we also successfully induced abortion in 20 patients with a single intraamniotic instillation of 40 mg PGF2alpha, there is a potential hazard in this method; i.e., PG may leak from the amniotic cavity around the catheter and pass in large quantity into the systemic circulation, resulting in undesirable, severe side effects. A more reasonable and effective method would be to inject the PGF2alpha directly at the target organ, the myometrium, by extraovular administration. Side effects could thus be minimized and effective doses of PG reduced. Such intrauterine extraovular administration of PG has been reported. The incidence of side effects was greatly reduced, although the instillation of PG was required every 1-3 hours and there were some incomplete abortions. The investigation of extraovular PGF2alpha administration for induction of abortion in gestations between 12 and 16 weeks has been especially interesting. The procedure outlined by Wiqvist and Bygdeman and Embrey and Hillier was the 1 that the authors followed initially. 250 mcg PGF2alpha was instilled initially and was followed by 750 mcg in 5 minutes and 1 mg in 30 minutes. 1 mg was then instilled at 6 hour intervals. However, the failure rate with this dosage schedule was quite high. There was a good initial uterine response, but during the administrationsat 12, 18, and 24 hours, the response diminished considerably . The frequency of administration was then increased to every 2-3 hours and the amount instilled was increased to 2-3 mg. Although somewhat more successful than the original dose schedule, this method was also unsatisfactory. It appeared from our results that the closer the injections, the higher the success rate. Thus, a brief case report is presented using continuous extraovular administration of PGF2alpha with a Harvard pump, and the results indicate it is quite satisfactory. The patients complained of very little pain and side effects have been slight. The mean abortion time for 15 patients was 14 hours. The mean time for multiparas, 11.7 hours, was faster than the 15.8 hours for primiparas.

Polyaniline-coated cigarette filters as a solid-phase extraction sorbent for the extraction and enrichment of polycyclic aromatic hydrocarbon in water samples.

PubMed

Bunkoed, Opas; Rueankaew, Thanaschaphorn; Nurerk, Piyaluk; Kanatharana, Proespichaya

2016-06-01

Polyaniline coated cigarette filters were successfully synthesized and used as a solid-phase extraction sorbent for the extraction and preconcentration of polycyclic aromatic hydrocarbons in water samples. The polyaniline helped to enhance the adsorption ability of polycyclic aromatic hydrocarbons on the sorbent through π-π interactions. The high porosity and large surface area of the cigarette filters helped to reduce backpressure and can be operated with high sample flow rate without loss of extraction efficiency. The developed sorbent was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The parameters that affected the extraction efficiencies, i.e. polymerization time, type of desorption solvent and its volume, sample flow rate, sample volume, sample pH, ionic strength, and organic modifier were investigated. Under the optimal conditions, the method was linear over the range of 0.5-10 μg/L and a detection limit of 0.5 ng/L. This simple, rapid, and cost-effective method was successfully applied to the preconcentration of polycyclic aromatic hydrocarbons from water samples. The developed method provided a high enrichment factor with good extraction efficiency (85-98%) and a relative standard deviation <10%. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Effectiveness of Health Care Information Technologies: Evaluation of Trust, Security Beliefs, and Privacy as Determinants of Health Care Outcomes

PubMed Central

2018-01-01

Background The diffusion of health information technologies (HITs) within the health care sector continues to grow. However, there is no theory explaining how success of HITs influences patient care outcomes. With the increase in data breaches, HITs’ success now hinges on the effectiveness of data protection solutions. Still, empirical research has only addressed privacy concerns, with little regard for other factors of information assurance. Objective The objective of this study was to study the effectiveness of HITs using the DeLone and McLean Information Systems Success Model (DMISSM). We examined the role of information assurance constructs (ie, the role of information security beliefs, privacy concerns, and trust in health information) as measures of HIT effectiveness. We also investigated the relationships between information assurance and three aspects of system success: attitude toward health information exchange (HIE), patient access to health records, and perceived patient care quality. Methods Using structural equation modeling, we analyzed the data from a sample of 3677 cancer patients from a public dataset. We used R software (R Project for Statistical Computing) and the Lavaan package to test the hypothesized relationships. Results Our extension of the DMISSM to health care was supported. We found that increased privacy concerns reduce the frequency of patient access to health records use, positive attitudes toward HIE, and perceptions of patient care quality. Also, belief in the effectiveness of information security increases the frequency of patient access to health records and positive attitude toward HIE. Trust in health information had a positive association with attitudes toward HIE and perceived patient care quality. Trust in health information had no direct effect on patient access to health records; however, it had an indirect relationship through privacy concerns. Conclusions Trust in health information and belief in the effectiveness of information security safeguards increases perceptions of patient care quality. Privacy concerns reduce patients’ frequency of accessing health records, patients’ positive attitudes toward HIE exchange, and overall perceived patient care quality. Health care organizations are encouraged to implement security safeguards to increase trust, the frequency of health record use, and reduce privacy concerns, consequently increasing patient care quality. PMID:29643052

Performance analysis of robust road sign identification

NASA Astrophysics Data System (ADS)

Ali, Nursabillilah M.; Mustafah, Y. M.; Rashid, N. K. A. M.

2013-12-01

This study describes performance analysis of a robust system for road sign identification that incorporated two stages of different algorithms. The proposed algorithms consist of HSV color filtering and PCA techniques respectively in detection and recognition stages. The proposed algorithms are able to detect the three standard types of colored images namely Red, Yellow and Blue. The hypothesis of the study is that road sign images can be used to detect and identify signs that are involved with the existence of occlusions and rotational changes. PCA is known as feature extraction technique that reduces dimensional size. The sign image can be easily recognized and identified by the PCA method as is has been used in many application areas. Based on the experimental result, it shows that the HSV is robust in road sign detection with minimum of 88% and 77% successful rate for non-partial and partial occlusions images. For successful recognition rates using PCA can be achieved in the range of 94-98%. The occurrences of all classes are recognized successfully is between 5% and 10% level of occlusions.

Surface functionalization of dopamine coated iron oxide nanoparticles for various surface functionalities

NASA Astrophysics Data System (ADS)

Sherwood, Jennifer; Xu, Yaolin; Lovas, Kira; Qin, Ying; Bao, Yuping

2017-04-01

We present effective conjugation of four small molecules (glutathione, cysteine, lysine, and Tris(hydroxymethyl)aminomethane) onto dopamine-coated iron oxide nanoparticles. Conjugation of these molecules could improve the surface functionality of nanoparticles for more neutral surface charge at physiological pH and potentially reduce non-specific adsorption of proteins to nanoparticles surfaces. The success of conjugation was evaluated with dynamic light scattering by measuring the surface charge changes and Fourier transform infrared spectroscopy for surface chemistry analysis. The stability of dopamine-coated nanoparticles and the ability of conjugated nanoparticles to reduce the formation of protein corona were evaluated by measuring the size and charge of the nanoparticles in biological medium. This facile conjugation method opens up possibilities for attaching various surface functionalities onto iron oxide nanoparticle surfaces for biomedical applications.

Adaptive design of an X-ray magnetic circular dichroism spectroscopy experiment with Gaussian process modelling

NASA Astrophysics Data System (ADS)

Ueno, Tetsuro; Hino, Hideitsu; Hashimoto, Ai; Takeichi, Yasuo; Sawada, Masahiro; Ono, Kanta

2018-01-01

Spectroscopy is a widely used experimental technique, and enhancing its efficiency can have a strong impact on materials research. We propose an adaptive design for spectroscopy experiments that uses a machine learning technique to improve efficiency. We examined X-ray magnetic circular dichroism (XMCD) spectroscopy for the applicability of a machine learning technique to spectroscopy. An XMCD spectrum was predicted by Gaussian process modelling with learning of an experimental spectrum using a limited number of observed data points. Adaptive sampling of data points with maximum variance of the predicted spectrum successfully reduced the total data points for the evaluation of magnetic moments while providing the required accuracy. The present method reduces the time and cost for XMCD spectroscopy and has potential applicability to various spectroscopies.

Is there a role for robotic totally endoscopic coronary artery bypass in patients with a colostomy?

PubMed

Gibber, Marc; Lehr, Eric J; Kon, Zachary N; Wehman, P Brody; Griffith, Bartley P; Bonatti, Johannes

2014-01-01

Preoperative colostomy presents a significant risk of sternal wound complications, mediastinitis, and ostomy injury in patients requiring coronary artery bypass grafting. Less invasive procedures in coronary surgery have a potential to reduce the risk of sternal wound healing problems. Robotic totally endoscopic coronary artery bypass grafting in patients with a colostomy has not been reported. We describe a case of completely endoscopic coronary surgery using the da Vinci Si system in a patient with a transverse colostomy. Single left internal mammary artery grafting to the left anterior coronary artery was performed successfully on the beating heart. We regard this technique as the least invasive method of surgical coronary revascularization with a potential to reduce the risk of surgical site infection and mediastinitis in patients with a colostomy.

Evaluating new technology to improve patient outcomes: a quality improvement approach.

PubMed

McMahon, Dorthea D

2002-01-01

The nurses in the peripherally inserted central catheter (PICC) program at the University of Washington Medical Center perform ongoing data tracking to measure team and patient outcomes. Quality improvement initiatives have included the transition to microintroducer technology and ultrasound-guided placement. Used together, this technology has allowed the PICC team to increase their bedside insertion success rate to 91%. The group has also changed PICC securement methods, and use of the Statlock anchoring device has reduced the incidence of catheter migration from 6% to 1.5% of all catheter lines placed. Catheter durability also was assessed. The Pressure Activated Safety Valve PICC was compared to the Groshong PICC and the rate of catheter repair and exchange due to breakage has been reduced from 11% to 1%.

Is traditional contraceptive use in Moldova associated with poverty and isolation?

PubMed

Lyons-Amos, Mark J; Durrant, Gabriele B; Padmadas, Sabu S

2011-05-01

This study investigates the correlates of traditional contraceptive use in Moldova, a poor country in Europe with one of the highest proportions of traditional contraceptive method users. The high reliance on traditional methods, particularly in the context of sub-replacement level fertility rate, has not been systematically evaluated in demographic research. Using cross-sectional data on a sub-sample of 6039 sexually experienced women from the 2005 Moldovan Demographic and Health Survey, this study hypothesizes that (a) economic and spatial disadvantages increase the likelihood of traditional method use, and (b) high exposure to family planning/reproductive health (FP/RH) programmes increases the propensity to modern method use. Multilevel multinomial models are used to examine the correlates of traditional method use controlling for exposure to sexual activity, socioeconomic and demographic characteristics and data structure. The results show that economic disadvantage increases the probability of traditional method use, but the overall effect is small. Although higher family planning media exposure decreases the reliance on traditional methods among younger women, it has only a marginal effect in increasing modern method use among older women. Family planning programmes designed to encourage women to switch from traditional to modern methods have some success--although the effect is considerably reduced in regions outside of the capital Chisinau. The study concludes that FP/RH efforts directed towards the poorest may have limited impact, but interventions targeted at older women could reduce the burden of unwanted pregnancies and abortions. Addressing differentials in accessing modern methods could improve uptake in rural areas.

Training and capacity building evaluation: Maximizing resources and results with Success Case Method.

PubMed

Medina, L; Acosta-Pérez, E; Velez, C; Martínez, G; Rivera, M; Sardiñas, L; Pattatucci, A

2015-10-01

This article describes the use of Success Case Method (Brinkerhoff, 2003) to evaluate health promotion and public health training programs. The goal of the Office Community Research and Engagement (OCRE) of the Puerto Rico Clinical and Translational Research Consortium (PRCTRC) is to establish a stable and sustainable translational research capacity. Early efforts toward achieving this goal included sponsoring two independent research training programs. A description of the implementation of the five step Success Case Method is presented. Results reveal that SCM would deem both trainings as highly successful, based upon the overall impact of a low number of success cases. However, a traditional summative evaluation would consider this disappointing. Strengths of SCM are discussed. It was concluded that the Success Case Method is a useful and valuable evaluative method for measuring the success of health promotion and public health training initiatives and provides sufficient information for decision-making processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reduced genetic variation and the success of an invasive species.

PubMed

Tsutsui, N D; Suarez, A V; Holway, D A; Case, T J

2000-05-23

Despite the severe ecological and economic damage caused by introduced species, factors that allow invaders to become successful often remain elusive. Of invasive taxa, ants are among the most widespread and harmful. Highly invasive ants are often unicolonial, forming supercolonies in which workers and queens mix freely among physically separate nests. By reducing costs associated with territoriality, unicolonial species can attain high worker densities, allowing them to achieve interspecific dominance. Here we examine the behavior and population genetics of the invasive Argentine ant (Linepithema humile) in its native and introduced ranges, and we provide a mechanism to explain its success as an invader. Using microsatellite markers, we show that a population bottleneck has reduced the genetic diversity of introduced populations. This loss is associated with reduced intraspecific aggression among spatially separate nests, and leads to the formation of interspecifically dominant supercolonies. In contrast, native populations are more genetically variable and exhibit pronounced intraspecific aggression. Although reductions in genetic diversity are generally considered detrimental, these findings provide an example of how a genetic bottleneck can lead to widespread ecological success. In addition, these results provide insights into the origin and evolution of unicoloniality, which is often considered a challenge to kin selection theory.

Prognostic score–based balance measures for propensity score methods in comparative effectiveness research

PubMed Central

Stuart, Elizabeth A.; Lee, Brian K.; Leacy, Finbarr P.

2013-01-01

Objective Examining covariate balance is the prescribed method for determining when propensity score methods are successful at reducing bias. This study assessed the performance of various balance measures, including a proposed balance measure based on the prognostic score (also known as the disease-risk score), to determine which balance measures best correlate with bias in the treatment effect estimate. Study Design and Setting The correlations of multiple common balance measures with bias in the treatment effect estimate produced by weighting by the odds, subclassification on the propensity score, and full matching on the propensity score were calculated. Simulated data were used, based on realistic data settings. Settings included both continuous and binary covariates and continuous covariates only. Results The standardized mean difference in prognostic scores, the mean standardized mean difference, and the mean t-statistic all had high correlations with bias in the effect estimate. Overall, prognostic scores displayed the highest correlations of all the balance measures considered. Prognostic score measure performance was generally not affected by model misspecification and performed well under a variety of scenarios. Conclusion Researchers should consider using prognostic score–based balance measures for assessing the performance of propensity score methods for reducing bias in non-experimental studies. PMID:23849158

Fast generation of video holograms of three-dimensional moving objects using a motion compensation-based novel look-up table.

PubMed

Kim, Seung-Cheol; Dong, Xiao-Bin; Kwon, Min-Woo; Kim, Eun-Soo

2013-05-06

A novel approach for fast generation of video holograms of three-dimensional (3-D) moving objects using a motion compensation-based novel-look-up-table (MC-N-LUT) method is proposed. Motion compensation has been widely employed in compression of conventional 2-D video data because of its ability to exploit high temporal correlation between successive video frames. Here, this concept of motion-compensation is firstly applied to the N-LUT based on its inherent property of shift-invariance. That is, motion vectors of 3-D moving objects are extracted between the two consecutive video frames, and with them motions of the 3-D objects at each frame are compensated. Then, through this process, 3-D object data to be calculated for its video holograms are massively reduced, which results in a dramatic increase of the computational speed of the proposed method. Experimental results with three kinds of 3-D video scenarios reveal that the average number of calculated object points and the average calculation time for one object point of the proposed method, have found to be reduced down to 86.95%, 86.53% and 34.99%, 32.30%, respectively compared to those of the conventional N-LUT and temporal redundancy-based N-LUT (TR-N-LUT) methods.

Short mechanical biological treatment of municipal solid waste allows landfill impact reduction saving waste energy content.

PubMed

Scaglia, Barbara; Salati, Silvia; Di Gregorio, Alessandra; Carrera, Alberto; Tambone, Fulvia; Adani, Fabrizio

2013-09-01

The aim of this work was to evaluate the effects of full scale MBT process (28 d) in removing inhibition condition for successive biogas (ABP) production in landfill and in reducing total waste impact. For this purpose the organic fraction of MSW was treated in a full-scale MBT plant and successively incubated vs. untreated waste, in simulated landfills for one year. Results showed that untreated landfilled-waste gave a total ABP reduction that was null. On the contrary MBT process reduced ABP of 44%, but successive incubation for one year in landfill gave a total ABP reduction of 86%. This ABP reduction corresponded to a MBT process of 22 weeks length, according to the predictive regression developed for ABP reduction vs. MBT-time. Therefore short MBT allowed reducing landfill impact, preserving energy content (ABP) to be produced successively by bioreactor technology since pre-treatment avoided process inhibition because of partial waste biostabilization. Copyright © 2013 Elsevier Ltd. All rights reserved.

Method to Reduce Muscle Fatigue During Transcutaneous Neuromuscular Electrical Stimulation in Major Knee and Ankle Muscle Groups.

PubMed

Sayenko, Dimitry G; Nguyen, Robert; Hirabayashi, Tomoyo; Popovic, Milos R; Masani, Kei

2015-09-01

A critical limitation with transcutaneous neuromuscular electrical stimulation as a rehabilitative approach is the rapid onset of muscle fatigue during repeated contractions. We have developed a method called spatially distributed sequential stimulation (SDSS) to reduce muscle fatigue by distributing the center of electrical field over a wide area within a single stimulation site, using an array of surface electrodes. To extend the previous findings and to prove feasibility of the method by exploring the fatigue-reducing ability of SDSS for lower limb muscle groups in the able-bodied population, as well as in individuals with spinal cord injury (SCI). SDSS was delivered through 4 active electrodes applied to the knee extensors and flexors, plantarflexors, and dorsiflexors, sending a stimulation pulse to each electrode one after another with 90° phase shift between successive electrodes. Isometric ankle torque was measured during fatiguing stimulations using SDSS and conventional single active electrode stimulation lasting 2 minutes. We demonstrated greater fatigue-reducing ability of SDSS compared with the conventional protocol, as revealed by larger values of fatigue index and/or torque peak mean in all muscles except knee flexors of able-bodied individuals, and in all muscles tested in individuals with SCI. Our study has revealed improvements in fatigue tolerance during transcutaneous neuromuscular electrical stimulation using SDSS, a stimulation strategy that alternates activation of subcompartments of muscles. The SDSS protocol can provide greater stimulation times with less decrement in mechanical output compared with the conventional protocol. © The Author(s) 2014.

Whole genome prediction and heritability of childhood asthma phenotypes.

PubMed

McGeachie, Michael J; Clemmer, George L; Croteau-Chonka, Damien C; Castaldi, Peter J; Cho, Michael H; Sordillo, Joanne E; Lasky-Su, Jessica A; Raby, Benjamin A; Tantisira, Kelan G; Weiss, Scott T

2016-12-01

While whole genome prediction (WGP) methods have recently demonstrated successes in the prediction of complex genetic diseases, they have not yet been applied to asthma and related phenotypes. Longitudinal patterns of lung function differ between asthmatics, but these phenotypes have not been assessed for heritability or predictive ability. Herein, we assess the heritability and genetic predictability of asthma-related phenotypes. We applied several WGP methods to a well-phenotyped cohort of 832 children with mild-to-moderate asthma from CAMP. We assessed narrow-sense heritability and predictability for airway hyperresponsiveness, serum immunoglobulin E, blood eosinophil count, pre- and post-bronchodilator forced expiratory volume in 1 sec (FEV 1 ), bronchodilator response, steroid responsiveness, and longitudinal patterns of lung function (normal growth, reduced growth, early decline, and their combinations). Prediction accuracy was evaluated using a training/testing set split of the cohort. We found that longitudinal lung function phenotypes demonstrated significant narrow-sense heritability (reduced growth, 95%; normal growth with early decline, 55%). These same phenotypes also showed significant polygenic prediction (areas under the curve [AUCs] 56% to 62%). Including additional demographic covariates in the models increased prediction 4-8%, with reduced growth increasing from 62% to 66% AUC. We found that prediction with a genomic relatedness matrix was improved by filtering available SNPs based on chromatin evidence, and this result extended across cohorts. Longitudinal reduced lung function growth displayed extremely high heritability. All phenotypes with significant heritability showed significant polygenic prediction. Using SNP-prioritization increased prediction across cohorts. WGP methods show promise in predicting asthma-related heritable traits.

Motion-induced error reduction by combining Fourier transform profilometry with phase-shifting profilometry.

PubMed

Li, Beiwen; Liu, Ziping; Zhang, Song

2016-10-03

We propose a hybrid computational framework to reduce motion-induced measurement error by combining the Fourier transform profilometry (FTP) and phase-shifting profilometry (PSP). The proposed method is composed of three major steps: Step 1 is to extract continuous relative phase maps for each isolated object with single-shot FTP method and spatial phase unwrapping; Step 2 is to obtain an absolute phase map of the entire scene using PSP method, albeit motion-induced errors exist on the extracted absolute phase map; and Step 3 is to shift the continuous relative phase maps from Step 1 to generate final absolute phase maps for each isolated object by referring to the absolute phase map with error from Step 2. Experiments demonstrate the success of the proposed computational framework for measuring multiple isolated rapidly moving objects.

Application of Taguchi methods to infrared window design

NASA Astrophysics Data System (ADS)

Osmer, Kurt A.; Pruszynski, Charles J.

1990-10-01

Dr. Genichi Taguchi, a prominent quality consultant, reduced a branch of statistics known as "Design of Experiments" to a cookbook methodology that can be employed by any competent engineer. This technique has been extensively employed by Japanese manufacturers, and is widely credited with helping them attain their current level of success in low cost, high quality product design and fabrication. Although this technique was originally put forth as a tool to streamline the determination of improved production processes, it can also be applied to a wide range of engineering problems. As part of an internal research project, this method of experimental design has been adapted to window trade studies and materials research. Two of these analyses are presented herein, and have been chosen to illustrate the breadth of applications to which the Taguchi method can be utilized.

Small UAV Automatic Ground Collision Avoidance System Design Considerations and Flight Test Results

NASA Technical Reports Server (NTRS)

Sorokowski, Paul; Skoog, Mark; Burrows, Scott; Thomas, SaraKatie

2015-01-01

The National Aeronautics and Space Administration (NASA) Armstrong Flight Research Center Small Unmanned Aerial Vehicle (SUAV) Automatic Ground Collision Avoidance System (Auto GCAS) project demonstrated several important collision avoidance technologies. First, the SUAV Auto GCAS design included capabilities to take advantage of terrain avoidance maneuvers flying turns to either side as well as straight over terrain. Second, the design also included innovative digital elevation model (DEM) scanning methods. The combination of multi-trajectory options and new scanning methods demonstrated the ability to reduce the nuisance potential of the SUAV while maintaining robust terrain avoidance. Third, the Auto GCAS algorithms were hosted on the processor inside a smartphone, providing a lightweight hardware configuration for use in either the ground control station or on board the test aircraft. Finally, compression of DEM data for the entire Earth and successful hosting of that data on the smartphone was demonstrated. The SUAV Auto GCAS project demonstrated that together these methods and technologies have the potential to dramatically reduce the number of controlled flight into terrain mishaps across a wide range of aviation platforms with similar capabilities including UAVs, general aviation aircraft, helicopters, and model aircraft.

Rapid-synthesis of zeolite T via sonochemical-assisted hydrothermal growth method.

PubMed

Jusoh, Norwahyu; Yeong, Yin Fong; Mohamad, Maisarah; Lau, Kok Keong; M Shariff, Azmi

2017-01-01

Sonochemical-assisted method has been identified as one of the potential pre-treatment methods which could reduce the formation duration of zeolite as well as other microporous and mesoporous materials. In the present work, zeolite T was synthesized via sonochemical-assisted pre-treatment prior to hydrothermal growth. The durations for sonochemical-assisted pre-treatment were varied from 30min to 90min. Meanwhile, the hydrothermal growth durations were ranged from 0.5 to 3days. The physicochemical properties of the resulting samples were characterized using XRD, FESEM, FTIR and BET. As verified by XRD, the samples synthesized via hydrothermal growth durations of 1, 2 and 3days and sonochemical-assisted pre-treatment durations of 60min and 90min demonstrated zeolite T structure. The samples which underwent sonochemical-assisted pre-treatment duration of 60min yielded higher crystallinity with negligible change of zeolite T morphology. Overall, the lengthy synthesis duration of zeolite T has been successfully reduced from 7days to 1day by applying sonochemical-assisted pre-treatment of 60min, while synthesis duration of 0.5days via sonochemical-assisted pre-treatment of 60min was not sufficient to produce zeolite T structure. Copyright © 2016 Elsevier B.V. All rights reserved.

Dynamic re-weighted total variation technique and statistic Iterative reconstruction method for x-ray CT metal artifact reduction

NASA Astrophysics Data System (ADS)

Peng, Chengtao; Qiu, Bensheng; Zhang, Cheng; Ma, Changyu; Yuan, Gang; Li, Ming

2017-07-01

Over the years, the X-ray computed tomography (CT) has been successfully used in clinical diagnosis. However, when the body of the patient to be examined contains metal objects, the image reconstructed would be polluted by severe metal artifacts, which affect the doctor's diagnosis of disease. In this work, we proposed a dynamic re-weighted total variation (DRWTV) technique combined with the statistic iterative reconstruction (SIR) method to reduce the artifacts. The DRWTV method is based on the total variation (TV) and re-weighted total variation (RWTV) techniques, but it provides a sparser representation than TV and protects the tissue details better than RWTV. Besides, the DRWTV can suppress the artifacts and noise, and the SIR convergence speed is also accelerated. The performance of the algorithm is tested on both simulated phantom dataset and clinical dataset, which are the teeth phantom with two metal implants and the skull with three metal implants, respectively. The proposed algorithm (SIR-DRWTV) is compared with two traditional iterative algorithms, which are SIR and SIR constrained by RWTV regulation (SIR-RWTV). The results show that the proposed algorithm has the best performance in reducing metal artifacts and protecting tissue details.

Square-wave stripping voltammetric determination of caffeic acid on electrochemically reduced graphene oxide-Nafion composite film.

PubMed

Filik, Hayati; Çetintaş, Gamze; Avan, Asiye Aslıhan; Aydar, Sevda; Koç, Serkan Naci; Boz, İsmail

2013-11-15

An electrochemical sensor composed of Nafion-graphene nanocomposite film for the voltammetric determination of caffeic acid (CA) was studied. A Nafion graphene oxide-modified glassy carbon electrode was fabricated by a simple drop-casting method and then graphene oxide was electrochemically reduced over the glassy carbon electrode. The electrochemical analysis method was based on the adsorption of caffeic acid on Nafion/ER-GO/GCE and then the oxidation of CA during the stripping step. The resulting electrode showed an excellent electrocatalytical response to the oxidation of caffeic acid (CA). The electrochemistry of caffeic acid on Nafion/ER-GO modified glassy carbon electrodes (GCEs) were studied by cyclic voltammetry and square-wave adsorption stripping voltammetry (SW-AdSV). At optimized test conditions, the calibration curve for CA showed two linear segments: the first linear segment increased from 0.1 to 1.5 and second linear segment increased up to 10 µM. The detection limit was determined as 9.1×10(-8) mol L(-1) using SW-AdSV. Finally, the proposed method was successfully used to determine CA in white wine samples. Copyright © 2013 Elsevier B.V. All rights reserved.

An adaptive reentry guidance method considering the influence of blackout zone

NASA Astrophysics Data System (ADS)

Wu, Yu; Yao, Jianyao; Qu, Xiangju

2018-01-01

Reentry guidance has been researched as a popular topic because it is critical for a successful flight. In view that the existing guidance methods do not take into account the accumulated navigation error of Inertial Navigation System (INS) in the blackout zone, in this paper, an adaptive reentry guidance method is proposed to obtain the optimal reentry trajectory quickly with the target of minimum aerodynamic heating rate. The terminal error in position and attitude can be also reduced with the proposed method. In this method, the whole reentry guidance task is divided into two phases, i.e., the trajectory updating phase and the trajectory planning phase. In the first phase, the idea of model predictive control (MPC) is used, and the receding optimization procedure ensures the optimal trajectory in the next few seconds. In the trajectory planning phase, after the vehicle has flown out of the blackout zone, the optimal reentry trajectory is obtained by online planning to adapt to the navigation information. An effective swarm intelligence algorithm, i.e. pigeon inspired optimization (PIO) algorithm, is applied to obtain the optimal reentry trajectory in both of the two phases. Compared to the trajectory updating method, the proposed method can reduce the terminal error by about 30% considering both the position and attitude, especially, the terminal error of height has almost been eliminated. Besides, the PIO algorithm performs better than the particle swarm optimization (PSO) algorithm both in the trajectory updating phase and the trajectory planning phases.

Petz recovery versus matrix reconstruction

NASA Astrophysics Data System (ADS)

Holzäpfel, Milan; Cramer, Marcus; Datta, Nilanjana; Plenio, Martin B.

2018-04-01

The reconstruction of the state of a multipartite quantum mechanical system represents a fundamental task in quantum information science. At its most basic, it concerns a state of a bipartite quantum system whose subsystems are subjected to local operations. We compare two different methods for obtaining the original state from the state resulting from the action of these operations. The first method involves quantum operations called Petz recovery maps, acting locally on the two subsystems. The second method is called matrix (or state) reconstruction and involves local, linear maps that are not necessarily completely positive. Moreover, we compare the quantities on which the maps employed in the two methods depend. We show that any state that admits Petz recovery also admits state reconstruction. However, the latter is successful for a strictly larger set of states. We also compare these methods in the context of a finite spin chain. Here, the state of a finite spin chain is reconstructed from the reduced states of a few neighbouring spins. In this setting, state reconstruction is the same as the matrix product operator reconstruction proposed by Baumgratz et al. [Phys. Rev. Lett. 111, 020401 (2013)]. Finally, we generalize both these methods so that they employ long-range measurements instead of relying solely on short-range correlations embodied in such local reduced states. Long-range measurements enable the reconstruction of states which cannot be reconstructed from measurements of local few-body observables alone and hereby we improve existing methods for quantum state tomography of quantum many-body systems.

Sustainable Irrigation Allocation Model for Dry and Wet Periods using Reservoir Storage and Inflow

NASA Astrophysics Data System (ADS)

Surianarayanan, S.; Suribabu, C. R.; Ramakrishnan, K.

2017-07-01

The dry period agriculture is inevitable both for the farmers for their earning, and for the soil for its fertility by crop-rotation. In tropical countries like INDIA, dry period agriculture becomes difficult because of less (or) no rain fall. Hence a simple water balancing model for irrigation scheduling, using the measure “Volumetric Reliability” is prepared in this paper, with the storage and inflow of a reservoir both for the dry and wet periods. The case-study is done for a reservoir in INDIA with thirty one years of hydrological data(from 1982 to 2012). The objective of this paper is to prepare a simple water balance model taking 10 days periods of demand and supply for ID crop(Irrigated Dry crop, ground nut) with usage of volumetric reliability concept for the periods of deficiency and adoption of less water requirement crops to reduce the water-stress during critical periods of crop growth, and finally arrive at a feasible allocation schedule for the success of agriculture and the yield throughout the year both for wet and dry crops with the available storage on the start of irrigation for a particular year. The reservoir is divided for storages such as full, deficient and critical storages. The starting storage for the dry period from January is used after adequate allocation for wet crops, the quantity for riparian rights and for drinking water, for the sustainability. By the water-balancing, the time-series for thirty one years, it is found that for twenty two years the demand for the ID crops is satisfied with the storage in the reservoir, and in the remaining years of deficient inflows, for three years (1986,1996,2004)the demand is managed by using the safe reliability factor for demand which can nullify the deficit in demand for the whole supply period. But it is genuine to assure that the reduction in the amount of water for each 10 days periods should not exceed the survival limit of the crop. Necessary soil-moisture must be ensured in the crop in its root zone.. A safe volumetric reliability factor of 0.75 is taken in this attempt to extend the success of dry period agriculture. The soil moisture balance in the clayey loam soil due to continuous irrigation can manage the deficiency, so that the soil-water does not go below the wilting point but must be checked with the soil-moisture sensors. The methods to reduce the evaporation from the soil, such as usage of drip irrigation and the mulching, which can reduce the crop water requirements in comparison with the conventional irrigation which is being followed at present in the spot of the case-study is suggested. In addition to these methods less water requirement crops like flowers, vegetables having less crop-period and provision of windbreak to reduce evapo-transpiration rates and other efficient methods of water management can make success of dry period agriculture even in the years critical storage level in the reservoir. The rainfall is not taken in this model which if in a year with ample quantity can be used for pre-sowing and for managing the water-stress. Augmentation of water with ground water, percolation tank can boost the level of success of agriculture. As the irrigation water allocation for the whole year, particularly for the ID crops is prepared for the full, deficient and critical storages, this paper can help to achieve sustainable growth of crops throughout the year.

Current pulse: can a production system reduce medical errors in health care?

PubMed

Printezis, Antonios; Gopalakrishnan, Mohan

2007-01-01

One of the reasons for rising health care costs is medical errors, a majority of which result from faulty systems and processes. Health care in the past has used process-based initiatives such as Total Quality Management, Continuous Quality Improvement, and Six Sigma to reduce errors. These initiatives to redesign health care, reduce errors, and improve overall efficiency and customer satisfaction have had moderate success. Current trend is to apply the successful Toyota Production System (TPS) to health care since its organizing principles have led to tremendous improvement in productivity and quality for Toyota and other businesses that have adapted them. This article presents insights on the effectiveness of TPS principles in health care and the challenges that lie ahead in successfully integrating this approach with other quality initiatives.

Changes in the use and management of forests for abating carbon emissions: issues and challenges under the Kyoto Protocol.

PubMed

Brown, Sandra; Swingland, Ian R; Hanbury-Tenison, Robin; Prance, Ghillean T; Myers, Norman

2002-08-15

The global carbon cycle is significantly influenced by changes in the use and management of forests and agriculture. Humans have the potential through changes in land use and management to alter the magnitude of forest-carbon stocks and the direction of forest-carbon fluxes. However, controversy over the use of biological means to absorb or reduce emissions of CO(2) (often referred to as carbon 'sinks') has arisen in the context of the Kyoto Protocol. The controversy is based primarily on two arguments: sinks may allow developed nations to delay or avoid actions to reduce fossil fuel emissions, and the technical and operational difficulties are too threatening to the successful implementation of land use and forestry projects for providing carbon offsets. Here we discuss the importance of including carbon sinks in efforts to address global warming and the consequent additional social, environmental and economic benefits to host countries. Activities in tropical forest lands provide the lowest cost methods both of reducing emissions and reducing atmospheric concentrations of greenhouse gases. We conclude that the various objections raised as to the inclusion of carbon sinks to ameliorate climate change can be addressed by existing techniques and technology. Carbon sinks provide a practical available method of achieving meaningful reductions in atmospheric concentrations of carbon dioxide while at the same time contribute to national sustainable development goals.

Alkaline deoxygenated graphene oxide for supercapacitor applications: An effective green alternative for chemically reduced graphene

NASA Astrophysics Data System (ADS)

Perera, Sanjaya D.; Mariano, Ruperto G.; Nijem, Nour; Chabal, Yves; Ferraris, John P.; Balkus, Kenneth J.

2012-10-01

Graphene is a promising electrode material for energy storage applications. The most successful method for preparing graphene from graphite involves the oxidation of graphite to graphene oxide (GO) and reduction back to graphene. Even though different chemical and thermal methods have been developed to reduce GO to graphene, the use of less toxic materials to generate graphene still remains a challenge. In this study we developed a facile one-pot synthesis of deoxygenated graphene (hGO) via alkaline hydrothermal process, which exhibits similar properties to the graphene obtained via hydrazine reduction (i.e. the same degree of deoxygenation found in hydrazine reduced GO). Moreover, the hGO formed freestanding, binder-free paper electrodes for supercapacitors. Coin cell type (CR2032) symmetric supercapacitors were assembled using the hGO electrodes. Electrochemical characterization of hGO was carried out using lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and ethylmethylimidazolium bis-(trifluoromethanesulfonyl)imide (EMITFSI) electrolytes. The results for the hGO electrodes were compared with the hydrazine reduced GO (rGO) electrode. The hGO electrode exhibits a energy density of 20 W h kg-1 and 50 W h kg-1 in LiTFSI and EMITFSI respectively, while delivering a maximum power density of 11 kW kg-1 and 14.7 kW kg-1 in LiTFSI and EMITFSI, respectively.

Elevated temperature enhances normal early embryonic development in the coral Platygyra acuta under low salinity conditions

NASA Astrophysics Data System (ADS)

Chui, Apple Pui Yi; Ang, Put

2015-06-01

To better understand the possible consequences of climate change on reef building scleractinian corals in a marginal environment, laboratory experiments were conducted to examine the interactive effects of changes in salinity and temperature on percent fertilization success and early embryonic development of the coral Platygyra acuta. In the present study, a salinity of 24 psu (ambient 32 psu) reduced fertilization success by 60 %. Normal embryonic development was reduced by >80 % at 26 psu (ambient 33 psu) with 100 % abnormal development at 22 psu under ambient temperature. Elevated temperature (+3 °C) above the ambient spawning temperature did not show any negative effects on fertilization success. However, there was a trend for more abnormal embryos to develop at elevated temperature in the 2 d of the spawning event. The interactive effects between salinity and temperature are statistically significant only on normal embryonic development of P. acuta, but not on its fertilization success. Salinity was revealed to be the main factor affecting both fertilization success and normal embryonic development. Interestingly, the much lower fertilization success (76 %) observed in the second day of spawning (Trial 2) under ambient temperature recovered to 99 % success under elevated (+3 °C) temperature conditions. Moreover, elevated temperature enhanced normal early embryonic development under lowered salinity (26 psu). This antagonistic interactive effect was consistently observed in two successive nights of spawning. Overall, our results indicate that, in terms of its fertilization success and embryonic development, P. acuta is the most tolerant coral species to reduced salinity thus far reported in the literature. Elevated temperature, at least that within the tolerable range of the corals, could apparently alleviate the potential negative effects from salinity stresses. This mitigating role of elevated temperature appears not to have been reported on corals before.

Technological Distractions (Part 2): A Summary of Approaches to Manage Clinical Alarms With Intent to Reduce Alarm Fatigue.

PubMed

Winters, Bradford D; Cvach, Maria M; Bonafide, Christopher P; Hu, Xiao; Konkani, Avinash; O'Connor, Michael F; Rothschild, Jeffrey M; Selby, Nicholas M; Pelter, Michele M; McLean, Barbara; Kane-Gill, Sandra L

2018-01-01

Alarm fatigue is a widely recognized safety and quality problem where exposure to high rates of clinical alarms results in desensitization leading to dismissal of or slowed response to alarms. Nonactionable alarms are thought to be especially problematic. Despite these concerns, the number of clinical alarm signals has been increasing as an everincreasing number of medical technologies are added to the clinical care environment. PubMed, SCOPUS, Embase, and CINAHL. We performed a systematic review of the literature focused on clinical alarms. We asked a primary key question; "what interventions have been attempted and resulted in the success of reducing alarm fatigue?" and 3-secondary key questions; "what are the negative effects on patients/families; what are the balancing outcomes (unintended consequences of interventions); and what human factor approaches apply to making an effective alarm?" Articles relevant to the Key Questions were selected through an iterative review process and relevant data was extracted using a standardized tool. We found 62 articles that had relevant and usable data for at least one key question. We found that no study used/developed a clear definition of "alarm fatigue." For our primary key question 1, the relevant studies focused on three main areas: quality improvement/bundled activities; intervention comparisons; and analysis of algorithm-based false and total alarm suppression. All sought to reduce the number of total alarms and/or false alarms to improve the positive predictive value. Most studies were successful to varying degrees. None measured alarm fatigue directly. There is no agreed upon valid metric(s) for alarm fatigue, and the current methods are mostly indirect. Assuming that reducing the number of alarms and/or improving positive predictive value can reduce alarm fatigue, there are promising avenues to address patient safety and quality problem. Further investment is warranted not only in interventions that may reduce alarm fatigue but also in defining how to best measure it.

Volume estimation of brain abnormalities in MRI data

NASA Astrophysics Data System (ADS)

Suprijadi, Pratama, S. H.; Haryanto, F.

2014-02-01

The abnormality of brain tissue always becomes a crucial issue in medical field. This medical condition can be recognized through segmentation of certain region from medical images obtained from MRI dataset. Image processing is one of computational methods which very helpful to analyze the MRI data. In this study, combination of segmentation and rendering image were used to isolate tumor and stroke. Two methods of thresholding were employed to segment the abnormality occurrence, followed by filtering to reduce non-abnormality area. Each MRI image is labeled and then used for volume estimations of tumor and stroke-attacked area. The algorithms are shown to be successful in isolating tumor and stroke in MRI images, based on thresholding parameter and stated detection accuracy.

Method of manufacturing a niobium-aluminum-germanium superconductive material

DOEpatents

Wang, J.L.F.; Pickus, M.R.; Douglas, K.E.

A method for manufacturing flexible Nb/sub 3/ (Al,Ge) multifilamentary superconductive material in which a sintered porous Nb compact is infiltrated with an Al-Ge alloy. It is deformed and heat treated in a series of steps at successively higher temperatures preferably below 1000/sup 0/C during the heat treatment, cladding material such as copper can be applied to facilitate a deformation step preceding the heat treatment and can remain in place through the heat treatment to serve as a temperature stabilizer for the superconductive material produced. These lower heat treatment temperatures favor formation of filaments with reduced grain size and with more grain boundaries which in turn increase the current-carrying capacity of the superconductive material.

Artificial intelligence in robot control systems

NASA Astrophysics Data System (ADS)

Korikov, A.

2018-05-01

This paper analyzes modern concepts of artificial intelligence and known definitions of the term "level of intelligence". In robotics artificial intelligence system is defined as a system that works intelligently and optimally. The author proposes to use optimization methods for the design of intelligent robot control systems. The article provides the formalization of problems of robotic control system design, as a class of extremum problems with constraints. Solving these problems is rather complicated due to the high dimensionality, polymodality and a priori uncertainty. Decomposition of the extremum problems according to the method, suggested by the author, allows reducing them into a sequence of simpler problems, that can be successfully solved by modern computing technology. Several possible approaches to solving such problems are considered in the article.

An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Articles Absorption During Reverberant Chamber Acoustic Testing of Spaceflight Hardware

NASA Technical Reports Server (NTRS)

Hozman, Aron D.; Hughes, William O.

2014-01-01

It is important to realize that some test-articles may have significant sound absorption that may challenge the acoustic power capabilities of a test facility. Therefore, to mitigate this risk of not being able to meet the customers target spectrum, it is prudent to demonstrate early-on an increased acoustic power capability which compensates for this test-article absorption. This paper describes a concise method to reduce this risk when testing aerospace test-articles which have significant absorption. This method was successfully applied during the SpaceX Falcon 9 Payload Fairing acoustic test program at the NASA Glenn Research Center Plum Brook Stations RATF.

[Methods for Reducing Laser Speckles to Achieve Even Illumination of the Microscope Field of View in Biophysical Studies].

PubMed

Barsky, V E; Lysov, Yu P; Yegorov, E E; Yurasov, D A; Mamaev, D D; Yurasov, R A; Cherepanov, A V; Chudinov, A V; Smoldovskaya, O V; Arefieva, A S; Rubina, A Yu; Zasedatelev, A S

2015-01-01

The aim of this work was to compare different speckle reduction techniques. It was shown that the use of devices based on liquid crystals only leads to partial reduction of speckle contrast. In quantitative luminescent microscopy an application of the mechanical devices when a laser beam is spread within the field of view turned out to be more efficient. Laser speckle noise was virtually eliminated with the developed and manufactured mechanical device comprising a fiber optic ring light guide and the vibrator that permits movement of optical fiber ends towards the laser diode during measurements. The method developed for the analysis of microarrays was successfully applied to the problem of speckle reduction.

Damage Detection in Rotorcraft Composite Structures Using Thermography and Laser-Based Ultrasound

NASA Technical Reports Server (NTRS)

Anastasi, Robert F.; Zalameda, Joseph N.; Madaras, Eric I.

2004-01-01

New rotorcraft structural composite designs incorporate lower structural weight, reduced manufacturing complexity, and improved threat protection. These new structural concepts require nondestructive evaluation inspection technologies that can potentially be field-portable and able to inspect complex geometries for damage or structural defects. Two candidate technologies were considered: Thermography and Laser-Based Ultrasound (Laser UT). Thermography and Laser UT have the advantage of being non-contact inspection methods, with Thermography being a full-field imaging method and Laser UT a point scanning technique. These techniques were used to inspect composite samples that contained both embedded flaws and impact damage of various size and shape. Results showed that the inspection techniques were able to detect both embedded and impact damage with varying degrees of success.

State Minority Health Officers' Perceptions of their Successes and Barriers to Reducing Racial and Ethnic Health Disparities.

PubMed

Diehr, Aaron J; Jordan, Timothy R; Price, James H; Sheu, Jiunn-Jye; Dake, Joseph A

2018-06-01

Minimal research has been conducted to examine the impact and reach of state offices of minority health (SOMH) and their role in reducing racial and ethnic health disparities within their states. Accordingly, the purpose of this study was to describe the shared experiences of SOMH officers to provide context for why these individuals believe that state organizational efforts have not yielded much success in reducing racial and ethnic health disparity gaps. Using a telephone interview guide, the investigators conducted telephone interviews with SOMH officers. Data were analyzed thematically based on emergent patterns in participant responses. A total of 47 of 50 state officers (94%) completed the interview. Though many officers were encouraged by increased awareness regarding health disparities, nearly every officer listed inadequate resources as the most impactful barrier impeding the success of their offices' missions. SOMH continue to be severely underfunded and are concerned about their potential for success, leaving them with minimal ability to engage in activities beyond educational awareness campaigns. For SOMH officers to be successful in eliminating disparities, legislators must provide them with adequate funding so they can engage in wider-reaching interventions targeting the social determinants of health.

A modified temporal criterion to meta-optimize the extended Kalman filter for land cover classification of remotely sensed time series

NASA Astrophysics Data System (ADS)

Salmon, B. P.; Kleynhans, W.; Olivier, J. C.; van den Bergh, F.; Wessels, K. J.

2018-05-01

Humans are transforming land cover at an ever-increasing rate. Accurate geographical maps on land cover, especially rural and urban settlements are essential to planning sustainable development. Time series extracted from MODerate resolution Imaging Spectroradiometer (MODIS) land surface reflectance products have been used to differentiate land cover classes by analyzing the seasonal patterns in reflectance values. The proper fitting of a parametric model to these time series usually requires several adjustments to the regression method. To reduce the workload, a global setting of parameters is done to the regression method for a geographical area. In this work we have modified a meta-optimization approach to setting a regression method to extract the parameters on a per time series basis. The standard deviation of the model parameters and magnitude of residuals are used as scoring function. We successfully fitted a triply modulated model to the seasonal patterns of our study area using a non-linear extended Kalman filter (EKF). The approach uses temporal information which significantly reduces the processing time and storage requirements to process each time series. It also derives reliability metrics for each time series individually. The features extracted using the proposed method are classified with a support vector machine and the performance of the method is compared to the original approach on our ground truth data.

Determination of total antioxidant capacity by a new spectrofluorometric method based on Ce(IV) reduction: Ce(III) fluorescence probe for CERAC assay.

PubMed

Ozyurt, Dilek; Demirata, Birsen; Apak, Resat

2011-11-01

A Ce(IV)-based reducing capacity (CERAC) assay was developed to measure the total antioxidant capacity (TAC) of foods, in which Ce(IV) would selectively oxidize antioxidant compounds but not citric acid and reducing sugars which are not classified as antioxidants. The method is based on the electron-transfer (ET) reaction between Ce(IV) ion and antioxidants in optimized acidic sulphate medium (i.e., 0.3 M H(2)SO(4) and 0.7 M Na(2)SO(4)) and subsequent determination of the produced Ce(III) ions by a fluorometric method. The fluorescent product, Ce(III), exhibited strong fluorescence at 360 nm with an excitation wavelength of 256 nm, the fluorescence intensity being correlated to antioxidant power of the original sample. The linear concentration range for most antioxidants was quite wide, e.g., 5.0 × 10(-7)-1.0 × 10(-5) M for quercetin. The developed procedure was successfully applied to the TAC assay of antioxidant compounds such as trolox, quercetin, gallic acid, ascorbic acid, catechin, naringin, naringenin, caffeic acid, ferulic acid, glutathione, and cysteine. The proposed method was reproducible, additive in terms of TAC values of constituents of complex mixtures, and the trolox equivalent antioxidant capacities (TEAC coefficients) of the tested antioxidant compounds gave good correlations with those found by reference methods such as ABTS and CUPRAC.

Improved methods to estimate the effective impervious area in urban catchments using rainfall-runoff data

NASA Astrophysics Data System (ADS)

Ebrahimian, Ali; Wilson, Bruce N.; Gulliver, John S.

2016-05-01

Impervious surfaces are useful indicators of the urbanization impacts on water resources. Effective impervious area (EIA), which is the portion of total impervious area (TIA) that is hydraulically connected to the drainage system, is a better catchment parameter in the determination of actual urban runoff. Development of reliable methods for quantifying EIA rather than TIA is currently one of the knowledge gaps in the rainfall-runoff modeling context. The objective of this study is to improve the rainfall-runoff data analysis method for estimating EIA fraction in urban catchments by eliminating the subjective part of the existing method and by reducing the uncertainty of EIA estimates. First, the theoretical framework is generalized using a general linear least square model and using a general criterion for categorizing runoff events. Issues with the existing method that reduce the precision of the EIA fraction estimates are then identified and discussed. Two improved methods, based on ordinary least square (OLS) and weighted least square (WLS) estimates, are proposed to address these issues. The proposed weighted least squares method is then applied to eleven urban catchments in Europe, Canada, and Australia. The results are compared to map measured directly connected impervious area (DCIA) and are shown to be consistent with DCIA values. In addition, both of the improved methods are applied to nine urban catchments in Minnesota, USA. Both methods were successful in removing the subjective component inherent in the analysis of rainfall-runoff data of the current method. The WLS method is more robust than the OLS method and generates results that are different and more precise than the OLS method in the presence of heteroscedastic residuals in our rainfall-runoff data.

Handling Data Skew in MapReduce Cluster by Using Partition Tuning

PubMed

Gao, Yufei; Zhou, Yanjie; Zhou, Bing; Shi, Lei; Zhang, Jiacai

2017-01-01

The healthcare industry has generated large amounts of data, and analyzing these has emerged as an important problem in recent years. The MapReduce programming model has been successfully used for big data analytics. However, data skew invariably occurs in big data analytics and seriously affects efficiency. To overcome the data skew problem in MapReduce, we have in the past proposed a data processing algorithm called Partition Tuning-based Skew Handling (PTSH). In comparison with the one-stage partitioning strategy used in the traditional MapReduce model, PTSH uses a two-stage strategy and the partition tuning method to disperse key-value pairs in virtual partitions and recombines each partition in case of data skew. The robustness and efficiency of the proposed algorithm were tested on a wide variety of simulated datasets and real healthcare datasets. The results showed that PTSH algorithm can handle data skew in MapReduce efficiently and improve the performance of MapReduce jobs in comparison with the native Hadoop, Closer, and locality-aware and fairness-aware key partitioning (LEEN). We also found that the time needed for rule extraction can be reduced significantly by adopting the PTSH algorithm, since it is more suitable for association rule mining (ARM) on healthcare data. © 2017 Yufei Gao et al.

Handling Data Skew in MapReduce Cluster by Using Partition Tuning.

PubMed

Gao, Yufei; Zhou, Yanjie; Zhou, Bing; Shi, Lei; Zhang, Jiacai

2017-01-01

The healthcare industry has generated large amounts of data, and analyzing these has emerged as an important problem in recent years. The MapReduce programming model has been successfully used for big data analytics. However, data skew invariably occurs in big data analytics and seriously affects efficiency. To overcome the data skew problem in MapReduce, we have in the past proposed a data processing algorithm called Partition Tuning-based Skew Handling (PTSH). In comparison with the one-stage partitioning strategy used in the traditional MapReduce model, PTSH uses a two-stage strategy and the partition tuning method to disperse key-value pairs in virtual partitions and recombines each partition in case of data skew. The robustness and efficiency of the proposed algorithm were tested on a wide variety of simulated datasets and real healthcare datasets. The results showed that PTSH algorithm can handle data skew in MapReduce efficiently and improve the performance of MapReduce jobs in comparison with the native Hadoop, Closer, and locality-aware and fairness-aware key partitioning (LEEN). We also found that the time needed for rule extraction can be reduced significantly by adopting the PTSH algorithm, since it is more suitable for association rule mining (ARM) on healthcare data.

Handling Data Skew in MapReduce Cluster by Using Partition Tuning

PubMed Central

Zhou, Yanjie; Zhou, Bing; Shi, Lei

2017-01-01

The healthcare industry has generated large amounts of data, and analyzing these has emerged as an important problem in recent years. The MapReduce programming model has been successfully used for big data analytics. However, data skew invariably occurs in big data analytics and seriously affects efficiency. To overcome the data skew problem in MapReduce, we have in the past proposed a data processing algorithm called Partition Tuning-based Skew Handling (PTSH). In comparison with the one-stage partitioning strategy used in the traditional MapReduce model, PTSH uses a two-stage strategy and the partition tuning method to disperse key-value pairs in virtual partitions and recombines each partition in case of data skew. The robustness and efficiency of the proposed algorithm were tested on a wide variety of simulated datasets and real healthcare datasets. The results showed that PTSH algorithm can handle data skew in MapReduce efficiently and improve the performance of MapReduce jobs in comparison with the native Hadoop, Closer, and locality-aware and fairness-aware key partitioning (LEEN). We also found that the time needed for rule extraction can be reduced significantly by adopting the PTSH algorithm, since it is more suitable for association rule mining (ARM) on healthcare data. PMID:29065568

The development speed paradox: can increasing development speed reduce R&D productivity?

PubMed

Lendrem, Dennis W; Lendrem, B Clare

2014-03-01

In the 1990s the pharmaceutical industry sought to increase R&D productivity by shifting development tasks into parallel to reduce development cycle times and increase development speed. This paper presents a simple model demonstrating that, when attrition rates are high as in pharmaceutical development, such development speed initiatives can increase the expected time for the first successful molecule to complete development. Increasing the development speed of successful molecules could actually reduce R&D productivity - the development speed paradox. Copyright © 2013 Elsevier Ltd. All rights reserved.

Automated Statistical Forecast Method to 36-48H ahead of Storm Wind and Dangerous Precipitation at the Mediterranean Region

NASA Astrophysics Data System (ADS)

Perekhodtseva, E. V.

2009-09-01

Development of successful method of forecast of storm winds, including squalls and tornadoes and heavy rainfalls, that often result in human and material losses, could allow one to take proper measures against destruction of buildings and to protect people. Well-in-advance successful forecast (from 12 hours to 48 hour) makes possible to reduce the losses. Prediction of the phenomena involved is a very difficult problem for synoptic till recently. The existing graphic and calculation methods still depend on subjective decision of an operator. Nowadays in Russia there is no hydrodynamic model for forecast of the maximal precipitation and wind velocity V> 25m/c, hence the main tools of objective forecast are statistical methods using the dependence of the phenomena involved on a number of atmospheric parameters (predictors). Statistical decisive rule of the alternative and probability forecast of these events was obtained in accordance with the concept of "perfect prognosis" using the data of objective analysis. For this purpose the different teaching samples of present and absent of this storm wind and rainfalls were automatically arranged that include the values of forty physically substantiated potential predictors. Then the empirical statistical method was used that involved diagonalization of the mean correlation matrix R of the predictors and extraction of diagonal blocks of strongly correlated predictors. Thus for these phenomena the most informative predictors were selected without loosing information. The statistical decisive rules for diagnosis and prognosis of the phenomena involved U(X) were calculated for choosing informative vector-predictor. We used the criterion of distance of Mahalanobis and criterion of minimum of entropy by Vapnik-Chervonenkis for the selection predictors. Successful development of hydrodynamic models for short-term forecast and improvement of 36-48h forecasts of pressure, temperature and others parameters allowed us to use the prognostic fields of those models for calculations of the discriminant functions in the nodes of the grid 150x150km and the values of probabilities P of dangerous wind and thus to get fully automated forecasts. In order to change to the alternative forecast the author proposes the empirical threshold values specified for this phenomenon and advance period 36 hours. In the accordance to the Pirsey-Obukhov criterion (T), the success of these automated statistical methods of forecast of squalls and tornadoes to 36 -48 hours ahead and heavy rainfalls in the warm season for the territory of Italy, Spain and Balkan countries is T = 1-a-b=0,54: 0,78 after author experiments. A lot of examples of very successful forecasts of summer storm wind and heavy rainfalls over the Italy and Spain territory are submitted at this report. The same decisive rules were applied to the forecast of these phenomena during cold period in this year too. This winter heavy snowfalls in Spain and in Italy and storm wind at this territory were observed very often. And our forecasts are successful.

Energy Management in Smart Cities Based on Internet of Things: Peak Demand Reduction and Energy Savings.

PubMed

Mahapatra, Chinmaya; Moharana, Akshaya Kumar; Leung, Victor C M

2017-12-05

Around the globe, innovation with integrating information and communication technologies (ICT) with physical infrastructure is a top priority for governments in pursuing smart, green living to improve energy efficiency, protect the environment, improve the quality of life, and bolster economy competitiveness. Cities today faces multifarious challenges, among which energy efficiency of homes and residential dwellings is a key requirement. Achieving it successfully with the help of intelligent sensors and contextual systems would help build smart cities of the future. In a Smart home environment Home Energy Management plays a critical role in finding a suitable and reliable solution to curtail the peak demand and achieve energy conservation. In this paper, a new method named as Home Energy Management as a Service (HEMaaS) is proposed which is based on neural network based Q -learning algorithm. Although several attempts have been made in the past to address similar problems, the models developed do not cater to maximize the user convenience and robustness of the system. In this paper, authors have proposed an advanced Neural Fitted Q -learning method which is self-learning and adaptive. The proposed method provides an agile, flexible and energy efficient decision making system for home energy management. A typical Canadian residential dwelling model has been used in this paper to test the proposed method. Based on analysis, it was found that the proposed method offers a fast and viable solution to reduce the demand and conserve energy during peak period. It also helps reducing the carbon footprint of residential dwellings. Once adopted, city blocks with significant residential dwellings can significantly reduce the total energy consumption by reducing or shifting their energy demand during peak period. This would definitely help local power distribution companies to optimize their resources and keep the tariff low due to curtailment of peak demand.

Energy Management in Smart Cities Based on Internet of Things: Peak Demand Reduction and Energy Savings

PubMed Central

Moharana, Akshaya Kumar

2017-01-01

Around the globe, innovation with integrating information and communication technologies (ICT) with physical infrastructure is a top priority for governments in pursuing smart, green living to improve energy efficiency, protect the environment, improve the quality of life, and bolster economy competitiveness. Cities today faces multifarious challenges, among which energy efficiency of homes and residential dwellings is a key requirement. Achieving it successfully with the help of intelligent sensors and contextual systems would help build smart cities of the future. In a Smart home environment Home Energy Management plays a critical role in finding a suitable and reliable solution to curtail the peak demand and achieve energy conservation. In this paper, a new method named as Home Energy Management as a Service (HEMaaS) is proposed which is based on neural network based Q-learning algorithm. Although several attempts have been made in the past to address similar problems, the models developed do not cater to maximize the user convenience and robustness of the system. In this paper, authors have proposed an advanced Neural Fitted Q-learning method which is self-learning and adaptive. The proposed method provides an agile, flexible and energy efficient decision making system for home energy management. A typical Canadian residential dwelling model has been used in this paper to test the proposed method. Based on analysis, it was found that the proposed method offers a fast and viable solution to reduce the demand and conserve energy during peak period. It also helps reducing the carbon footprint of residential dwellings. Once adopted, city blocks with significant residential dwellings can significantly reduce the total energy consumption by reducing or shifting their energy demand during peak period. This would definitely help local power distribution companies to optimize their resources and keep the tariff low due to curtailment of peak demand. PMID:29206159

Successful Expansion of an Underexpanded Stent by Rotational Atherectomy

PubMed Central

Vales, Lori; Coppola, John; Kwan, Tak

2013-01-01

The current routine use of intracoronary stents in percutaneous coronary intervention (PCI) has significantly reduced rates of restenosis, compared with balloon angioplasty alone. On the contrary, small post-stenting luminal dimensions due to undilatable, heavily calcified plaques have repeatedly been shown to significantly increase the rates of in-stent restenosis. Rotational atherectomy of lesions is an alternative method to facilitate PCI and prevent underexpansion of stents, when balloon angioplasty fails to successfully dilate a lesion. Stentablation, using rotational atherectomy to expand underexpanded stents deployed in heavily calcified plaques, has also been reported. We report a case via the transradial approach of rotational-atherectomy–facilitated PCI of in-stent restenosis of a severely underexpanded stent due to a heavily calcified plaque. We review the literature and suggest rotational atherectomy may have a role in treating a refractory, severely underexpanded stent caused by a heavily calcified plaque through various proposed mechanisms. PMID:24436587

Preparation of Sandwich-like NiCo2O4/rGO/NiO Heterostructure on Nickel Foam for High-Performance Supercapacitor Electrodes

NASA Astrophysics Data System (ADS)

Li, Delong; Gong, Youning; Wang, Miaosheng; Pan, Chunxu

2017-04-01

A kind of sandwich-like NiCo2O4/rGO/NiO heterostructure composite has been successfully anchored on nickel foam substrate via a three-step hydrothermal method with successive annealing treatment. The smart combination of NiCo2O4, reduced graphene oxide (rGO), and NiO nanostructure in the sandwich-like nano architecture shows a promising synergistic effect for supercapacitors with greatly enhanced electrochemical performance. For serving as supercapacitor electrode, the NiCo2O4/rGO/NiO heterostructure materials exhibit remarkable specific capacitance of 2644 mF cm-2 at current density of 1 mA cm-2, and excellent capacitance retentions of 97.5% after 3000 cycles. It is expected that the present heterostructure will be a promising electrode material for high-performance supercapacitors.

Investigation of privatization by level crossing approach

NASA Astrophysics Data System (ADS)

Vahabi, M.; Jafari, G. R.

2009-09-01

Privatization - a political as well as an economic policy - is generally defined as the transfer of a property or the responsibility for it from the public to the private sector. But privatization is not merely the transfer of the ownership and efficiency of the market should be considered. A successful privatization program induces better profitability and efficiency, higher output, more investment, etc. The main method of privatization is through introducing new stocks to the market to motivate competition. However, for a successful privatization the capability of a market for absorbing the new stock should also be considered. Without paying attention to this aspect, privatization through the introduction of new stocks may lead to reduced market efficiency. We study, based on the complexity theory and in particular the concept of Level Crossing, the effect of the stages of the development, activity, risk, and the waiting times for special events on the privatization.

Genetic attack on neural cryptography.

PubMed

Ruttor, Andreas; Kinzel, Wolfgang; Naeh, Rivka; Kanter, Ido

2006-03-01

Different scaling properties for the complexity of bidirectional synchronization and unidirectional learning are essential for the security of neural cryptography. Incrementing the synaptic depth of the networks increases the synchronization time only polynomially, but the success of the geometric attack is reduced exponentially and it clearly fails in the limit of infinite synaptic depth. This method is improved by adding a genetic algorithm, which selects the fittest neural networks. The probability of a successful genetic attack is calculated for different model parameters using numerical simulations. The results show that scaling laws observed in the case of other attacks hold for the improved algorithm, too. The number of networks needed for an effective attack grows exponentially with increasing synaptic depth. In addition, finite-size effects caused by Hebbian and anti-Hebbian learning are analyzed. These learning rules converge to the random walk rule if the synaptic depth is small compared to the square root of the system size.

Laser mass spectrometry for DNA sequencing, disease diagnosis, and fingerprinting

NASA Astrophysics Data System (ADS)

Chen, C. H. Winston; Taranenko, N. I.; Zhu, Y. F.; Chung, C. N.; Allman, S. L.

1997-05-01

Since laser mass spectrometry has the potential for achieving very fast DNA analysis, we recently applied it to DNA sequencing, DNA typing for fingerprinting, and DNA screening for disease diagnosis. Two different approaches for sequencing DNA have been successfully demonstrated. One is to sequence DNA with DNA ladders produced from Sanger's enzymatic method. The other is to do direct sequencing without DNA ladders. The need for quick DNA typing for identification purposes is critical for forensic application. Our preliminary results indicate laser mass spectrometry can possible be used for rapid DNA fingerprinting applications at a much lower cost than gel electrophoresis. Population screening for certain genetic disease can be a very efficient step to reducing medical costs through prevention. Since laser mass spectrometry can provide very fast DNA analysis, we applied laser mass spectrometry to disease diagnosis. Clinical samples with both base deletion and point mutation have been tested with complete success.

Genetic attack on neural cryptography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruttor, Andreas; Kinzel, Wolfgang; Naeh, Rivka

2006-03-15

Different scaling properties for the complexity of bidirectional synchronization and unidirectional learning are essential for the security of neural cryptography. Incrementing the synaptic depth of the networks increases the synchronization time only polynomially, but the success of the geometric attack is reduced exponentially and it clearly fails in the limit of infinite synaptic depth. This method is improved by adding a genetic algorithm, which selects the fittest neural networks. The probability of a successful genetic attack is calculated for different model parameters using numerical simulations. The results show that scaling laws observed in the case of other attacks hold formore » the improved algorithm, too. The number of networks needed for an effective attack grows exponentially with increasing synaptic depth. In addition, finite-size effects caused by Hebbian and anti-Hebbian learning are analyzed. These learning rules converge to the random walk rule if the synaptic depth is small compared to the square root of the system size.« less

Genetic attack on neural cryptography

NASA Astrophysics Data System (ADS)

Ruttor, Andreas; Kinzel, Wolfgang; Naeh, Rivka; Kanter, Ido

2006-03-01

Different scaling properties for the complexity of bidirectional synchronization and unidirectional learning are essential for the security of neural cryptography. Incrementing the synaptic depth of the networks increases the synchronization time only polynomially, but the success of the geometric attack is reduced exponentially and it clearly fails in the limit of infinite synaptic depth. This method is improved by adding a genetic algorithm, which selects the fittest neural networks. The probability of a successful genetic attack is calculated for different model parameters using numerical simulations. The results show that scaling laws observed in the case of other attacks hold for the improved algorithm, too. The number of networks needed for an effective attack grows exponentially with increasing synaptic depth. In addition, finite-size effects caused by Hebbian and anti-Hebbian learning are analyzed. These learning rules converge to the random walk rule if the synaptic depth is small compared to the square root of the system size.

Mercury Reduces Avian Reproductive Success and Imposes Selection: An Experimental Study with Adult- or Lifetime-Exposure in Zebra Finch

PubMed Central

Varian-Ramos, Claire W.; Swaddle, John P.; Cristol, Daniel A.

2014-01-01

Mercury is a global pollutant that biomagnifies in food webs, placing wildlife at risk of reduced reproductive fitness and survival. Songbirds are the most diverse branch of the avian evolutionary tree; many are suffering persistent and serious population declines and we know that songbirds are frequently exposed to mercury pollution. Our objective was to determine the effects of environmentally relevant doses of mercury on reproductive success of songbirds exposed throughout their lives or only as adults. The two modes of exposure simulated philopatric species versus dispersive species, and are particularly relevant because of the heightened mercury-sensitivity of developing nervous systems. We performed a dosing study with dietary methylmercury in a model songbird species, the zebra finch (Taeniopygia guttata), at doses from 0.3 – 2.4 parts per million. Birds were exposed to mercury either as adults only or throughout their lives. All doses of mercury reduced reproductive success, with the lowest dose reducing the number of independent offspring produced in one year by 16% and the highest dose, representing approximately half the lethal dose for this species, causing a 50% reduction. While mercury did not affect clutch size or survivorship, it had the most consistent effect on the proportion of chicks that fledged from the nest, regardless of mode of exposure. Among birds exposed as adults, mercury caused a steep increase in the latency to re-nest after loss of a clutch. Birds exposed for their entire lifetimes, which were necessarily the offspring of dosed parents, had up to 50% lower reproductive success than adult-exposed birds at low doses of methylmercury, but increased reproductive success at high doses, suggesting selection for mercury tolerance at the highest level of exposure. Our results indicate that mercury levels in prey items at contaminated sites pose a significant threat to populations of songbirds through reduced reproductive success. PMID:24759822

A novel method to quantify the activity of alcohol acetyltransferase Using a SnO2-based sensor of electronic nose.

PubMed

Hu, Zhongqiu; Li, Xiaojing; Wang, Huxuan; Niu, Chen; Yuan, Yahong; Yue, Tianli

2016-07-15

Alcohol acetyltransferase (AATFase) extensively catalyzes the reactions of alcohols to acetic esters in microorganisms and plants. In this work, a novel method has been proposed to quantify the activity of AATFase using a SnO2-based sensor of electronic nose, which was determined on the basis of its higher sensitivity to the reducing alcohol than the oxidizing ester. The maximum value of the first-derivative of the signals from the SnO2-based sensor was therein found to be an eigenvalue of isoamyl alcohol concentration. Quadratic polynomial regression perfectly fitted the correlation between the eigenvalue and the isoamyl alcohol concentration. The method was used to determine the AATFase activity in this type of reaction by calculating the conversion rate of isoamyl alcohol. The proposed method has been successfully applied to determine the AATFase activity of a cider yeast strain. Compared with GC-MS, the method shows promises with ideal recovery and low cost. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Improvement of Utilization Ratio of Metal Organic Sources for the Low Cost Preparation of MOCVD-synthesized YBCO Films based on a Self-heating Technology

NASA Astrophysics Data System (ADS)

Zhao, Ruipeng; Liu, Qing; Xia, Yudong; Tao, Bowan; Li, Yanrong

2017-12-01

We have successfully applied metal organic chemical vapor deposition (MOCVD) to synthesize biaxially textured YBa2Cu3O7-δ (YBCO) superconducting films on the templates of LaMnO3/epitaxial MgO/IBAD-MgO/solution deposition planarization (SDP) Y2O3/Hastelloy tape. The YBCO films have obtained dense and smooth surface with good structure and performance. A new self-heating method, which replaced the conventional heating-wire radiation heating method, has been used to heat the Hastelloy metal tapes by us. Compared with the heating-wire radiation heating method, the self-heating method shows higher energy efficiency and lower power consumption, which has good advantage to simplify the structure of the MOCVD system. Meanwhile, the utilization ratio of metal organic sources can be increased from 6% to 20% through adopting the new self-heating method. Then the preparation cost of the YBCO films can be also greatly reduced.

Taguchi Approach to Design Optimization for Quality and Cost: An Overview

NASA Technical Reports Server (NTRS)

Unal, Resit; Dean, Edwin B.

1990-01-01

Calibrations to existing cost of doing business in space indicate that to establish human presence on the Moon and Mars with the Space Exploration Initiative (SEI) will require resources, felt by many, to be more than the national budget can afford. In order for SEI to succeed, we must actually design and build space systems at lower cost this time, even with tremendous increases in quality and performance requirements, such as extremely high reliability. This implies that both government and industry must change the way they do business. Therefore, new philosophy and technology must be employed to design and produce reliable, high quality space systems at low cost. In recognizing the need to reduce cost and improve quality and productivity, Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) have initiated Total Quality Management (TQM). TQM is a revolutionary management strategy in quality assurance and cost reduction. TQM requires complete management commitment, employee involvement, and use of statistical tools. The quality engineering methods of Dr. Taguchi, employing design of experiments (DOE), is one of the most important statistical tools of TQM for designing high quality systems at reduced cost. Taguchi methods provide an efficient and systematic way to optimize designs for performance, quality, and cost. Taguchi methods have been used successfully in Japan and the United States in designing reliable, high quality products at low cost in such areas as automobiles and consumer electronics. However, these methods are just beginning to see application in the aerospace industry. The purpose of this paper is to present an overview of the Taguchi methods for improving quality and reducing cost, describe the current state of applications and its role in identifying cost sensitive design parameters.

Application of denaturing high-performance liquid chromatography for monitoring sulfate-reducing bacteria in oil fields.

PubMed

Priha, Outi; Nyyssönen, Mari; Bomberg, Malin; Laitila, Arja; Simell, Jaakko; Kapanen, Anu; Juvonen, Riikka

2013-09-01

Sulfate-reducing bacteria (SRB) participate in microbially induced corrosion (MIC) of equipment and H2S-driven reservoir souring in oil field sites. Successful management of industrial processes requires methods that allow robust monitoring of microbial communities. This study investigated the applicability of denaturing high-performance liquid chromatography (DHPLC) targeting the dissimilatory sulfite reductase ß-subunit (dsrB) gene for monitoring SRB communities in oil field samples from the North Sea, the United States, and Brazil. Fifteen of the 28 screened samples gave a positive result in real-time PCR assays, containing 9 × 10(1) to 6 × 10(5) dsrB gene copies ml(-1). DHPLC and denaturing gradient gel electrophoresis (DGGE) community profiles of the PCR-positive samples shared an overall similarity; both methods revealed the same samples to have the lowest and highest diversity. The SRB communities were diverse, and different dsrB compositions were detected at different geographical locations. The identified dsrB gene sequences belonged to several phylogenetic groups, such as Desulfovibrio, Desulfococcus, Desulfomicrobium, Desulfobulbus, Desulfotignum, Desulfonatronovibrio, and Desulfonauticus. DHPLC showed an advantage over DGGE in that the community profiles were very reproducible from run to run, and the resolved gene fragments could be collected using an automated fraction collector and sequenced without a further purification step. DGGE, on the other hand, included casting of gradient gels, and several rounds of rerunning, excising, and reamplification of bands were needed for successful sequencing. In summary, DHPLC proved to be a suitable tool for routine monitoring of the diversity of SRB communities in oil field samples.

Bio-inspired hybrid microelectrodes: a hybrid solution to improve long-term performance of chronic intracortical implants.

PubMed

De Faveri, Sara; Maggiolini, Emma; Miele, Ermanno; De Angelis, Francesco; Cesca, Fabrizia; Benfenati, Fabio; Fadiga, Luciano

2014-01-01

The use of implants that allow chronic electrical stimulation and recording in the brain of human patients is currently limited by a series of events that cause the deterioration over time of both the electrode surface and the surrounding tissue. The main reason of failure is the tissue inflammatory reaction that eventually causes neuronal loss and glial encapsulation, resulting in a progressive increase of the electrode-electrolyte impedance. Here, we describe a new method to create bio-inspired electrodes to mimic the mechanical properties and biological composition of the host tissue. This combination has a great potential to increase the implant lifetime by reducing tissue reaction and improving electrical coupling. Our method implies coating the electrode with reprogrammed neural or glial cells encapsulated within a hydrogel layer. We chose fibrin as a hydrogel and primary hippocampal neurons or astrocytes from rat brain as cellular layer. We demonstrate that fibrin coating is highly biocompatible, forms uniform coatings of controllable thickness, does not alter the electrochemical properties of the microelectrode and allows good quality recordings. Moreover, it reduces the amount of host reactive astrocytes - over time - compared to a bare wire and is fully reabsorbed by the surrounding tissue within 7 days after implantation, avoiding the common problem of hydrogels swelling. Both astrocytes and neurons could be successfully grown onto the electrode surface within the fibrin hydrogel without altering the electrochemical properties of the microelectrode. This bio-hybrid device has therefore a good potential to improve the electrical integration at the neuron-electrode interface and support the long-term success of neural prostheses.

Lessons of War: Turning Data Into Decisions.

PubMed

Forsberg, Jonathan A; Potter, Benjamin K; Wagner, Matthew B; Vickers, Andrew; Dente, Christopher J; Kirk, Allan D; Elster, Eric A

2015-09-01

Recent conflicts in Afghanistan and Iraq produced a substantial number of critically wounded service-members. We collected biomarker and clinical information from 73 patients who sustained 116 life-threatening combat wounds, and sought to determine if the data could be used to predict the likelihood of wound failure. From each patient, we collected clinical information, serum, wound effluent, and tissue prior to and at each surgical débridement. Inflammatory cytokines were quantified in both the serum and effluent, as were gene expression targets. The primary outcome was successful wound healing. Computer intensive methods were used to derive prognostic models that were internally validated using target shuffling and cross-validation methods. A second cohort of eighteen critically injured civilian patients was evaluated to determine if similar inflammatory responses were observed. The best-performing models enhanced clinical observation with biomarker data from the serum and wound effluent, an indicator that systemic inflammatory conditions contribute to local wound failure. A Random Forest model containing ten variables demonstrated the highest accuracy (AUC 0.79). Decision Curve Analysis indicated that the use of this model would improve clinical outcomes and reduce unnecessary surgical procedures. Civilian trauma patients demonstrated similar inflammatory responses and an equivalent wound failure rate, indicating that the model may be generalizable to civilian settings. Using advanced analytics, we successfully codified clinical and biomarker data from combat patients into a potentially generalizable decision support tool. Analysis of inflammatory data from critically ill patients with acute injury may inform decision-making to improve clinical outcomes and reduce healthcare costs. United States Department of Defense Health Programs.

Critical review: Injectability of calcium phosphate pastes and cements.

PubMed

O'Neill, R; McCarthy, H O; Montufar, E B; Ginebra, M-P; Wilson, D I; Lennon, A; Dunne, N

2017-03-01

Calcium phosphate cements (CPC) have seen clinical success in many dental and orthopaedic applications in recent years. The properties of CPC essential for clinical success are reviewed in this article, which includes properties of the set cement (e.g. bioresorbability, biocompatibility, porosity and mechanical properties) and unset cement (e.g. setting time, cohesion, flow properties and ease of delivery to the surgical site). Emphasis is on the delivery of calcium phosphate (CaP) pastes and CPC, in particular the occurrence of separation of the liquid and solid components of the pastes and cements during injection; and established methods to reduce this phase separation. In addition a review of phase separation mechanisms observed during the extrusion of other biphasic paste systems and the theoretical models used to describe these mechanisms are discussed. Occurrence of phase separation of calcium phosphate pastes and cements during injection limits their full exploitation as a bone substitute in minimally invasive surgical applications. Due to lack of theoretical understanding of the phase separation mechanism(s), optimisation of an injectable CPC that satisfies clinical requirements has proven difficult. However, phase separation of pastes during delivery has been the focus across several research fields. Therefore in addition to a review of methods to reduce phase separation of CPC and the associated constraints, a review of phase separation mechanisms observed during extrusion of other pastes and the theoretical models used to describe these mechanisms is presented. It is anticipated this review will benefit future attempts to develop injectable calcium phosphate based systems. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

A successive ionic layer adsorption and reaction (SILAR) method to fabricate a layer-by-layer (LbL) MnO2-reduced graphene oxide assembly for supercapacitor application

NASA Astrophysics Data System (ADS)

Jana, Milan; Saha, Sanjit; Samanta, Pranab; Murmu, Naresh Chandra; Kim, Nam Hoon; Kuila, Tapas; Lee, Joong Hee

2017-02-01

A facile, cost effective and additive-free successive ionic layer adsorption and reaction (SILAR) technique is demonstrated to develop layer-by-layer (LbL) assembly of reduced graphene oxide (RGO) and MnO2 (MnO2-RGOSILAR) on a stainless steel current collector, for designing light-weight and small size supercapacitor electrode. The transmission electron microscopy and field emission scanning electron microscopy images shows uniform distribution of RGO and MnO2 in the MnO2-RGOSILAR. The LbL (MnO2-RGOSILAR) demonstrates improved physical and electrochemical properties over the hydrothermally prepared MnO2-RGO (MnO2-RGOHydro). The electrochemical environment of MnO2-RGOSILAR is explained by constant phase element in the high frequency region, and a Warburg element in the low frequency region in the Z-View fitted Nyquist plot. The equivalent circuit of the MnO2-RGOHydro, displays the co-existence of EDL and constant phase element, indicating inhomogeneous distribution of MnO2 and RGO by the hydrothermal technique. An asymmetric supercapacitor device is designed with MnO2-RGOSILAR as positive electrode, and thermally reduced GO (TRGO) as negative electrode. The designed cell exhibits high energy density of ∼88 Wh kg-1, elevated power density of ∼23,200 W kg-1, and ∼79% retention in capacitance after 10,000 charge-discharge cycles.

Reproductive isolation between populations of Iris atropurpurea is associated with ecological differentiation

PubMed Central

Yardeni, Gil; Tessler, Naama; Imbert, Eric; Sapir, Yuval

2016-01-01

Background and Aims Speciation is often described as a continuous dynamic process, expressed by different magnitudes of reproductive isolation (RI) among groups in different levels of divergence. Studying intraspecific partial RI can shed light on mechanisms underlying processes of population divergence. Intraspecific divergence can be driven by spatially stochastic accumulation of genetic differences following reduced gene flow, resulting in increased RI with increased geographical distance, or by local adaptation, resulting in increased RI with environmental difference. Methods We tested for RI as a function of both geographical distance and ecological differentiation in Iris atropurpurea, an endemic Israeli coastal plant. We crossed plants in the Netanya Iris Reserve population with plants from 14 populations across the species’ full distribution, and calculated RI and reproductive success based on fruit set, seed set and fraction of seed viability. Key Results We found that total RI was not significantly associated with geographical distance, but significantly increased with ecological distance. Similarly, reproductive success of the crosses, estimated while controlling for the dependency of each component on the previous stage, significantly reduced with increased ecological distance. Conclusions Our results indicate that the rise of post-pollination reproductive barriers in I. atropurpurea is more affected by ecological differentiation between populations than by geographical distance, supporting the hypothesis that ecological differentiation is predominant over isolation by distance and by reduced gene flow in this species. These findings also affect conservation management, such as genetic rescue, in the highly fragmented and endangered I. atropurpurea. PMID:27436798

Effectiveness of a confinement strategy for reducing campsite impacts in Shenandoah National Park

USGS Publications Warehouse

Reid, S.E.; Marion, J.L.

2004-01-01

The expansion and proliferation of backcountry campsites is a persistent problem in many parks and protected areas. Shenandoah National Park (SNP) has one of the highest backcountry overnight use densities in the USA national parks system. SNP managers implemented a multi-option backcountry camping policy in 2000 that included camping containment with established campsites. These actions were intended to reduce the number of campsites and the area of camping disturbance at each site. This paper describes a longitudinal adaptive management assessment of the new campsite policies, applying quantitative measures of campsite conditions to evaluate the efficacy of management interventions. Physical campsite measurements combined with qualitative visitor interviews indicated SNP had successfully reduced the number of campsites and aggregate measures of camping-related disturbance in the Park, while minimizing the use of regulations, site facilities and staff resources. Implications for managers of other protected areas are that an established site camping policy can minimize camping disturbance, including the number and size of campsites, provided managers can sustain rehabilitation efforts to close and restore unneeded campsites. Experiential attributes, such as the potential for solitude, can also be manipulated through control over the selection of established campsites. Integrating resource and social science methods also provided a more holistic perspective on management policy assessments. Adaptive management research provided a timely evaluation of management success while facilitating effective modifications in response to unforeseen challenges. Conclusions regarding the effectiveness of a visitor impact containment strategy involving an established site camping option are offered.

Photocatalytic removal of phenol over titanium dioxide- reduced graphene oxide photocatalyst

NASA Astrophysics Data System (ADS)

Shuhada Alim, Nor; Lintang, Hendrik O.; Yuliati, Leny

2016-02-01

Titanium dioxide (TiO2) has been one of the most investigated semiconductors due to its high activity for the removal of organic pollutants. In order to improve the efficiency of the TiO2, series of TiO2-reduced graphene oxide (rGO) composites with various loading amounts of graphene oxide (GO), which were 0.5, 1, 3 and 5 wt% were prepared by UV- assisted photocatalytic reduction method. The X-ray diffraction (XRD) patterns and Fourier transform infrared spectroscopy (FTIR) spectra confirmed that all the TiO2-rGO composites samples were successfully synthesized without disrupting the structure of the TiO2. Fluorescence spectroscopy revealed the role of the rGO to reduce the electron-hole recombination on the TiO2, while the transmission electron microscopy-energy dispersive X- ray spectroscopy (TEM-EDS) confirmed the morphology and the presence of both TiO2 and rGO. In the photocatalytic removal of phenol, all the TiO2-rGO composites showed better photocatalytic activities than the TiO2 under UV light irradiation. The activity of the TiO2 was enhanced by more than two times with the addition of the GO with the optimum amount (3 wt%). It was proposed that the good photocatalytic performance obtained on the composites were caused by the successful suppression of electron-hole recombination by the rGO on the TiO2.

Mitigating flood exposure

PubMed Central

Shultz, James M; McLean, Andrew; Herberman Mash, Holly B; Rosen, Alexa; Kelly, Fiona; Solo-Gabriele, Helena M; Youngs Jr, Georgia A; Jensen, Jessica; Bernal, Oscar; Neria, Yuval

2013-01-01

Introduction. In 2011, following heavy winter snowfall, two cities bordering two rivers in North Dakota, USA faced major flood threats. Flooding was foreseeable and predictable although the extent of risk was uncertain. One community, Fargo, situated in a shallow river basin, successfully mitigated and prevented flooding. For the other community, Minot, located in a deep river valley, prevention was not possible and downtown businesses and one-quarter of the homes were inundated, in the city’s worst flood on record. We aimed at contrasting the respective hazards, vulnerabilities, stressors, psychological risk factors, psychosocial consequences, and disaster risk reduction strategies under conditions where flood prevention was, and was not, possible. Methods. We applied the “trauma signature analysis” (TSIG) approach to compare the hazard profiles, identify salient disaster stressors, document the key components of disaster risk reduction response, and examine indicators of community resilience. Results. Two demographically-comparable communities, Fargo and Minot, faced challenging river flood threats and exhibited effective coordination across community sectors. We examined the implementation of disaster risk reduction strategies in situations where coordinated citizen action was able to prevent disaster impact (hazard avoidance) compared to the more common scenario when unpreventable disaster strikes, causing destruction, harm, and distress. Across a range of indicators, it is clear that successful mitigation diminishes both physical and psychological impact, thereby reducing the trauma signature of the event. Conclusion. In contrast to experience of historic flooding in Minot, the city of Fargo succeeded in reducing the trauma signature by way of reducing risk through mitigation. PMID:28228985

One-Step Laser Patterned Highly Uniform Reduced Graphene Oxide Thin Films for Circuit-Enabled Tattoo and Flexible Humidity Sensor Application.

PubMed

Park, Rowoon; Kim, Hyesu; Lone, Saifullah; Jeon, Sangheon; Kwon, Young Woo; Shin, Bosung; Hong, Suck Won

2018-06-06

The conversion of graphene oxide (GO) into reduced graphene oxide (rGO) is imperative for the electronic device applications of graphene-based materials. Efficient and cost-effective fabrication of highly uniform GO films and the successive reduction into rGO on a large area is still a cumbersome task through conventional protocols. Improved film casting of GO sheets on a polymeric substrate with quick and green reduction processes has a potential that may establish a path to the practical flexible electronics. Herein, we report a facile deposition process of GO on flexible polymer substrates to create highly uniform thin films over a large area by a flow-enabled self-assembly approach. The self-assembly of GO sheets was successfully performed by dragging the trapped solution of GO in confined geometry, which consisted of an upper stationary blade and a lower moving substrate on a motorized translational stage. The prepared GO thin films could be selectively reduced and facilitated from the simple laser direct writing process for programmable circuit printing with the desired configuration and less sample damage due to the non-contact mode operation without the use of photolithography, toxic chemistry, or high-temperature reduction methods. Furthermore, two different modes of the laser operating system for the reduction of GO films turned out to be valuable for the construction of novel graphene-based high-throughput electrical circuit boards compatible with integrating electronic module chips and flexible humidity sensors.

Neurolinguistic programming used to reduce the need for anaesthesia in claustrophobic patients undergoing MRI.

PubMed

Bigley, J; Griffiths, P D; Prydderch, A; Romanowski, C A J; Miles, L; Lidiard, H; Hoggard, N

2010-02-01

The purpose of this study was to assess the success of neurolinguistic programming in reducing the need for general anaesthesia in claustrophobic patients who require MRI and to consider the financial implications for health providers. This was a prospective study performed in 2006 and 2007 at a teaching hospital in England and comprised 50 adults who had unsuccessful MR examinations because of claustrophobia. The main outcome measures were the ability to tolerate a successful MR examination after neurolinguistic programming, the reduction of median anxiety scores produced by neurolinguistic programming, and models of costs for various imaging pathways. Neurolinguistic programming allowed 38/50 people (76%) to complete the MR examination successfully. Overall, the median anxiety score was significantly reduced following the session of neurolinguistic programming. In conclusion, neurolinguistic programming reduced anxiety and subsequently allowed MRI to be performed without resorting to general anaesthesia in a high proportion of claustrophobic adults. If these results are reproducible, there will be major advantages in terms of patient safety and costs.

Neurolinguistic programming used to reduce the need for anaesthesia in claustrophobic patients undergoing MRI

PubMed Central

Bigley, J; Griffiths, P D; Prydderch, A; Romanowski, C A J; Miles, L; Lidiard, H; Hoggard, N

2010-01-01

The purpose of this study was to assess the success of neurolinguistic programming in reducing the need for general anaesthesia in claustrophobic patients who require MRI and to consider the financial implications for health providers. This was a prospective study performed in 2006 and 2007 at a teaching hospital in England and comprised 50 adults who had unsuccessful MR examinations because of claustrophobia. The main outcome measures were the ability to tolerate a successful MR examination after neurolinguistic programming, the reduction of median anxiety scores produced by neurolinguistic programming, and models of costs for various imaging pathways. Neurolinguistic programming allowed 38/50 people (76%) to complete the MR examination successfully. Overall, the median anxiety score was significantly reduced following the session of neurolinguistic programming. In conclusion, neurolinguistic programming reduced anxiety and subsequently allowed MRI to be performed without resorting to general anaesthesia in a high proportion of claustrophobic adults. If these results are reproducible, there will be major advantages in terms of patient safety and costs. PMID:19505969

Simple sol-gel synthesis and characterization of new CoTiO3/CoFe2O4 nanocomposite by using liquid glucose, maltose and starch as fuel, capping and reducing agents.

PubMed

Ansari, Fatemeh; Sobhani, Azam; Salavati-Niasari, Masoud

2018-03-15

The sol-gel auto-combustion technique is an effective method for the synthesis of the composites. In this research for the first time, CoTiO 3 /CoFe 2 O 4 nanocomposites are successfully synthesized via a new sol-gel auto-combustion technique. The glucose, maltose and starch are used as fuel, capping and reducing agents, also the optimal reducing agent is chosen. The effects of quantity of reducing agent, molar ratio of Ti:Co, calcination temperature and time on the morphology, particle size, magnetic property, purity and phase of the nanocomposites are investigated. XRD patterns show formation of CoTiO 3 /CoFe 2 O 4 spherical nanoparticles with nearly evenly distribution, when the molar ratio of Co/Ti is 1:1. EDS analysis confirm results of XRD. The magnetic behavior of the nanocomposites is studied by VSM. The nanocomposites exhibit a high coercivity at room temperature. Copyright © 2017 Elsevier Inc. All rights reserved.

Social Support and Successful Aging in Assisted Living Residents

ERIC Educational Resources Information Center

Howie, Laura Odell; Troutman-Jordan, Meredith; Newman, Ann M.

2014-01-01

Successful aging has been associated with adequate social support. However, impaired functionality, increased dependence, multiple comorbidities, and reduced social interactions place older assisted living community (ALC) residents at risk for poorer social support and less successful aging. This cross-sectional descriptive study used the revised…

Interventions to reduce injuries among older workers in agriculture: A review of evaluated intervention projects.

PubMed

Nilsson, Kerstin

2016-10-17

The number of older workers is increasing throughout the industrialised world and older workers are known to be more frequent in the injury-prone agricultural sector. This paper sought to extend knowledge by reviewing evaluated intervention studies intended to decrease risks and work injuries among older workers in agriculture. A systematic literature review regarding: evaluated intervention projects on injury prevention, including participants aged 55 years and older, and working in agriculture. This review identified evaluated intervention projects regarding: i) intervention in injury prevention; ii) interventions to increase knowledge in health and safety tasks and practice; and iii) interventions to increase the use of safety equipment in work. The evaluations reviewed showed that the interventions were less successful in involving older agricultural workers than their younger counterparts. The evaluations also showed that the outcome of interventions was generally less positive or brought about no significant difference in risk awareness and behaviour change among older agricultural workers. Many articles and statistics describe injuries in agriculture. Especially older farm workers are one of the groups with most work injuries and deaths. Despite this, an important finding in this review was shortage of implemented and evaluated intervention studies orientated toward reduce injuries among older workers in agriculture. This review also found that no intervention project in the evaluations studied had a clear positive effect. Many intervention studies have problems with or lack of evaluation in the study design. Based on the results in this review, important future research tasks are to improve the design of interventions, devise implementation methods and formulate appropriate evaluation methods to measure the outcome of the interventions. Intervention programmes also need to involve older workers specific physical and cognitive age aspects in the design to increases their willingness to participate and to be successful to reduce injuries.

The role of nature-based infrastructure (NBI) in coastal resiliency planning: A literature review.

PubMed

Saleh, Firas; Weinstein, Michael P

2016-12-01

The use of nature-based infrastructure (NBI) has attracted increasing attention in the context of protection against coastal flooding. This review is focused on NBI approaches to improve coastal resilience in the face of extreme storm events, including hurricanes. We not only consider the role of NBI as a measure to protect people and property but also in the context of other ecological goods and services provided by tidal wetlands including production of fish and shellfish. Although the results of many studies suggest that populated areas protected by coastal marshes were less likely to experience damage when exposed to the full force of storm surge, it was absolutely critical to place the role of coastal wetlands into perspective by noting that while tidal marshes can reduce wave energy from low-to-moderate-energy storms, their capacity to substantially reduce storm surge remains poorly quantified. Moreover, although tidal marshes can reduce storm surge from fast moving storms, very large expanses of habitat are needed to be most effective, and for most urban settings, there is insufficient space to rely on nature-based risk reduction strategies alone. The success of a given NBI method is also context dependent on local conditions, with potentially confounding influences from substrate characteristics, topography, near shore bathymetry, distance from the shore and other physical factors and human drivers such as development patterns. Furthermore, it is important to better understand the strengths and weaknesses of newly developed NBI projects through rigorous evaluations and characterize the local specificities of the particular built and natural environments surrounding these coastal areas. In order for the relevant science to better inform policy, and assist in land-use challenges, scientists must clearly state the likelihood of success in a particular circumstance and set of conditions. We conclude that "caution is advised" before selecting a particular NBI method as there is no "one size fits all" solution to address site-specific conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Hyperspectral remote sensing for advanced detection of early blight (Alternaria solani) disease in potato (Solanum tuberosum) plants

NASA Astrophysics Data System (ADS)

Atherton, Daniel

Early detection of disease and insect infestation within crops and precise application of pesticides can help reduce potential production losses, reduce environmental risk, and reduce the cost of farming. The goal of this study was the advanced detection of early blight (Alternaria solani) in potato (Solanum tuberosum) plants using hyperspectral remote sensing data captured with a handheld spectroradiometer. Hyperspectral reflectance spectra were captured 10 times over five weeks from plants grown to the vegetative and tuber bulking growth stages. The spectra were analyzed using principal component analysis (PCA), spectral change (ratio) analysis, partial least squares (PLS), cluster analysis, and vegetative indices. PCA successfully distinguished more heavily diseased plants from healthy and minimally diseased plants using two principal components. Spectral change (ratio) analysis provided wavelengths (490-510, 640, 665-670, 690, 740-750, and 935 nm) most sensitive to early blight infection followed by ANOVA results indicating a highly significant difference (p < 0.0001) between disease rating group means. In the majority of the experiments, comparisons of diseased plants with healthy plants using Fisher's LSD revealed more heavily diseased plants were significantly different from healthy plants. PLS analysis demonstrated the feasibility of detecting early blight infected plants, finding four optimal factors for raw spectra with the predictor variation explained ranging from 93.4% to 94.6% and the response variation explained ranging from 42.7% to 64.7%. Cluster analysis successfully distinguished healthy plants from all diseased plants except for the most mildly diseased plants, showing clustering analysis was an effective method for detection of early blight. Analysis of the reflectance spectra using the simple ratio (SR) and the normalized difference vegetative index (NDVI) was effective at differentiating all diseased plants from healthy plants, except for the most mildly diseased plants. Of the analysis methods attempted, cluster analysis and vegetative indices were the most promising. The results show the potential of hyperspectral remote sensing for the detection of early blight in potato plants.

Efficient Reverse-Engineering of a Developmental Gene Regulatory Network

PubMed Central

Cicin-Sain, Damjan; Ashyraliyev, Maksat; Jaeger, Johannes

2012-01-01

Understanding the complex regulatory networks underlying development and evolution of multi-cellular organisms is a major problem in biology. Computational models can be used as tools to extract the regulatory structure and dynamics of such networks from gene expression data. This approach is called reverse engineering. It has been successfully applied to many gene networks in various biological systems. However, to reconstitute the structure and non-linear dynamics of a developmental gene network in its spatial context remains a considerable challenge. Here, we address this challenge using a case study: the gap gene network involved in segment determination during early development of Drosophila melanogaster. A major problem for reverse-engineering pattern-forming networks is the significant amount of time and effort required to acquire and quantify spatial gene expression data. We have developed a simplified data processing pipeline that considerably increases the throughput of the method, but results in data of reduced accuracy compared to those previously used for gap gene network inference. We demonstrate that we can infer the correct network structure using our reduced data set, and investigate minimal data requirements for successful reverse engineering. Our results show that timing and position of expression domain boundaries are the crucial features for determining regulatory network structure from data, while it is less important to precisely measure expression levels. Based on this, we define minimal data requirements for gap gene network inference. Our results demonstrate the feasibility of reverse-engineering with much reduced experimental effort. This enables more widespread use of the method in different developmental contexts and organisms. Such systematic application of data-driven models to real-world networks has enormous potential. Only the quantitative investigation of a large number of developmental gene regulatory networks will allow us to discover whether there are rules or regularities governing development and evolution of complex multi-cellular organisms. PMID:22807664

Microinvasive Glaucoma Stent (MIGS) Surgery With Concomitant Phakoemulsification Cataract Extraction: Outcomes and the Learning Curve.

PubMed

Al-Mugheiry, Toby S; Cate, Heidi; Clark, Allan; Broadway, David C

2017-07-01

To evaluate learning effects with respect to outcomes of a microinvasive glaucoma stent (MIGS) inserted during cataract surgery in glaucoma patients. Single surgeon, observational cohort study of 25 consecutive Ivantis Hydrus microstent insertions, with a minimum follow-up of 12 months. A learning curve analysis was performed by assessing hypotensive effect, adverse effects, and surgical procedure duration, with respect to consecutive case number. Success was defined with respect to various intraocular pressure (IOP) targets (21, 18, 15 mm Hg) and reduction in required antiglaucoma medications. Complete success was defined as achieving target IOP without antiglaucoma therapy. No clinically significant adverse events or learning effects were identified, although surgical time reduced with consecutive case number. Mean follow-up was 16.8 months. At final follow-up the mean IOP for all eyes was reduced from 18.1 (±3.6) mm Hg [and a simulated untreated value of 25.9 (±5.2) mm Hg] to 15.3 (±2.2) mm Hg (P=0.007; <0.0001) and the mean number of topical antiglaucoma medications was reduced from 1.96 (±0.96) to 0.04 (±0.20) (P<0.0001). Complete success (IOP<21 mm Hg, no medications) was 96% at final follow-up. Complete success (IOP<18 mm Hg, no medications) was 80% at final follow-up, but only 32% with a target IOP of <15 mm Hg (no medications). No significant learning curve effects were observed for a trained surgeon with respect to MIGS microstent insertion performed at the time of cataract surgery. Adjunctive MIGS surgery was successful in lowering IOP to <18 mm Hg and reducing/abolishing the requirement for antiglaucoma medication in eyes with open-angle glaucoma, but less successful at achieving low IOP levels (<15 mm Hg).

Influence of 2 cryopreservation methods to induce CCL-13 from dental pulp cells.

PubMed

Ahn, Su-Jin; Jang, Ji-Hyun; Seo, Ji-Sung; Cho, Kyu Min; Jung, Su-Hee; Lee, Hyeon-Woo; Kim, Eun-Cheol; Park, Sang Hyuk

2013-12-01

Cryopreservation preserves periodontal ligament cells but has a lower success rate with dental pulp cells (DPCs) because it causes inflammation. There are 2 well-known cryopreservation methods that reduce inflammation, slow freezing and rapid freezing, but the effects of the 2 methods on inflammation are not well-established. The purpose of this study was to compare the effects of the 2 different cryopreservation methods on CCL-13 induction from DPCs by using microarrays, real-time polymerase chain reaction (PCR), Western blotting, enzyme-linked immunosorbent assay, and confocal laser scanning microscopy (CLSM). In this study, the concentration of cryoprotectant was fixed, and the methods compared differed with respect to freezing speed. Initially we screened the DPCs of cryopreserved teeth with expression microarrays, and CCL-13 was identified as a differentially expressed gene involved in generalized inflammation. We then compared the expression of CCL-13 after exposing teeth to the 2 cryopreservation methods by using real-time PCR, Western blot, enzyme-linked immunosorbent assay, and CLSM. Expression of CCL-13 was up-regulated significantly only in the rapid freezing group, except in measurements made by real-time PCR. CLSM analysis also confirmed this up-regulation visually. Rapid freezing increased the expression of CCL-13 in DPCs compared with slow freezing. Understanding the inflammatory effect of cryopreservation should help to establish an optimal cryoprofile to minimize inflammation of DPCs and reduce the need for endodontic treatment. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.