Incorporating additional targets into learning trials for individuals with autism spectrum disorder.

PubMed

Nottingham, Casey L; Vladescu, Jason C; Kodak, Tiffany M

2015-01-01

Recently, researchers have investigated the effectiveness and efficiency of presenting secondary targets during learning trials for individuals with autism spectrum disorder (ASD). This instructional method may be more efficient than typical methods used with learners with ASD, because learners may acquire secondary targets without additional instruction. This review will discuss the recent literature on providing secondary targets during teaching trials for individuals with ASD, identify common aspects and results among these studies, and identify areas for future research. © Society for the Experimental Analysis of Behavior.

The Contribution of Mixed Methods Research to the Field of Childhood Trauma: A Narrative Review Focused on Data Integration

ERIC Educational Resources Information Center

Boeije, Hennie; Slagt, Meike; van Wesel, Floryt

2013-01-01

In mixed methods research (MMR), integrating the quantitative and the qualitative components of a study is assumed to result in additional knowledge (or "yield"). This narrative review examines the extent to which MMR is used in the field of childhood trauma and provides directions for improving mixed methods studies in this field. A…

NASA gear research and its probable effect on rotorcraft transmission design

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.; Townsend, D. P.; Coy, J. J.

1979-01-01

The NASA Lewis Research Center devised a comprehensive gear technology research program beginning in 1969, the results of which are being integrated into the NASA civilian Helicopter Transmission System Technology Program. Attention is given to the results of this gear research and those programs which are presently being undertaken. In addition, research programs studying pitting fatigue, gear steels and processing, life prediction methods, gear design and dynamics, elastohydrodynamic lubrication, lubrication methods and gear noise are presented. Finally, the impact of advanced gear research technology on rotorcraft transmission design is discussed.

A Multimodal Deep Log-Based User Experience (UX) Platform for UX Evaluation

PubMed Central

Ali Khan, Wajahat; Hur, Taeho; Muhammad Bilal, Hafiz Syed; Ul Hassan, Anees; Lee, Sungyoung

2018-01-01

The user experience (UX) is an emerging field in user research and design, and the development of UX evaluation methods presents a challenge for both researchers and practitioners. Different UX evaluation methods have been developed to extract accurate UX data. Among UX evaluation methods, the mixed-method approach of triangulation has gained importance. It provides more accurate and precise information about the user while interacting with the product. However, this approach requires skilled UX researchers and developers to integrate multiple devices, synchronize them, analyze the data, and ultimately produce an informed decision. In this paper, a method and system for measuring the overall UX over time using a triangulation method are proposed. The proposed platform incorporates observational and physiological measurements in addition to traditional ones. The platform reduces the subjective bias and validates the user’s perceptions, which are measured by different sensors through objectification of the subjective nature of the user in the UX assessment. The platform additionally offers plug-and-play support for different devices and powerful analytics for obtaining insight on the UX in terms of multiple participants. PMID:29783712

A Multimodal Deep Log-Based User Experience (UX) Platform for UX Evaluation.

PubMed

Hussain, Jamil; Khan, Wajahat Ali; Hur, Taeho; Bilal, Hafiz Syed Muhammad; Bang, Jaehun; Hassan, Anees Ul; Afzal, Muhammad; Lee, Sungyoung

2018-05-18

The user experience (UX) is an emerging field in user research and design, and the development of UX evaluation methods presents a challenge for both researchers and practitioners. Different UX evaluation methods have been developed to extract accurate UX data. Among UX evaluation methods, the mixed-method approach of triangulation has gained importance. It provides more accurate and precise information about the user while interacting with the product. However, this approach requires skilled UX researchers and developers to integrate multiple devices, synchronize them, analyze the data, and ultimately produce an informed decision. In this paper, a method and system for measuring the overall UX over time using a triangulation method are proposed. The proposed platform incorporates observational and physiological measurements in addition to traditional ones. The platform reduces the subjective bias and validates the user's perceptions, which are measured by different sensors through objectification of the subjective nature of the user in the UX assessment. The platform additionally offers plug-and-play support for different devices and powerful analytics for obtaining insight on the UX in terms of multiple participants.

Integrating Program Assessment and a Career Focus into a Research Methods Course

ERIC Educational Resources Information Center

Senter, Mary Scheuer

2017-01-01

Sociology research methods students in 2013 and 2016 implemented a series of "real world" data gathering activities that enhanced their learning while assisting the department with ongoing program assessment and program review. In addition to the explicit collection of program assessment data on both students' development of sociological…

Nonlinear Unsteady Aerodynamic Modeling Using Wind Tunnel and Computational Data

NASA Technical Reports Server (NTRS)

Murphy, Patrick C.; Klein, Vladislav; Frink, Neal T.

2016-01-01

Extensions to conventional aircraft aerodynamic models are required to adequately predict responses when nonlinear unsteady flight regimes are encountered, especially at high incidence angles and under maneuvering conditions. For a number of reasons, such as loss of control, both military and civilian aircraft may extend beyond normal and benign aerodynamic flight conditions. In addition, military applications may require controlled flight beyond the normal envelope, and civilian flight may require adequate recovery or prevention methods from these adverse conditions. These requirements have led to the development of more general aerodynamic modeling methods and provided impetus for researchers to improve both techniques and the degree of collaboration between analytical and experimental research efforts. In addition to more general mathematical model structures, dynamic test methods have been designed to provide sufficient information to allow model identification. This paper summarizes research to develop a modeling methodology appropriate for modeling aircraft aerodynamics that include nonlinear unsteady behaviors using both experimental and computational test methods. This work was done at Langley Research Center, primarily under the NASA Aviation Safety Program, to address aircraft loss of control, prevention, and recovery aerodynamics.

Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators.

PubMed

Memon, Muhammad Usman; Lim, Sungjoon

2017-09-09

The significant improvements observed in the field of bulk-production of printed microchip technologies in the past decade have allowed the fabrication of microchip printing on numerous materials including organic and flexible substrates. Printed sensors and electronics are of significant interest owing to the fast and low-cost fabrication techniques used in their fabrication. The increasing amount of research and deployment of specially printed electronic sensors in a number of applications demonstrates the immense attention paid by researchers to this topic in the pursuit of achieving wider-scale electronics on different dielectric materials. Although there are many traditional methods for fabricating radio frequency (RF) components, they are time-consuming, expensive, complicated, and require more power for operation than additive fabrication methods. This paper serves as a summary/review of improvements made to the additive printing technologies. The article focuses on three recently developed printing methods for the fabrication of wireless sensors operating at microwave frequencies. The fabrication methods discussed include inkjet printing, three-dimensional (3D) printing, and screen printing.

Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators

PubMed Central

2017-01-01

The significant improvements observed in the field of bulk-production of printed microchip technologies in the past decade have allowed the fabrication of microchip printing on numerous materials including organic and flexible substrates. Printed sensors and electronics are of significant interest owing to the fast and low-cost fabrication techniques used in their fabrication. The increasing amount of research and deployment of specially printed electronic sensors in a number of applications demonstrates the immense attention paid by researchers to this topic in the pursuit of achieving wider-scale electronics on different dielectric materials. Although there are many traditional methods for fabricating radio frequency (RF) components, they are time-consuming, expensive, complicated, and require more power for operation than additive fabrication methods. This paper serves as a summary/review of improvements made to the additive printing technologies. The article focuses on three recently developed printing methods for the fabrication of wireless sensors operating at microwave frequencies. The fabrication methods discussed include inkjet printing, three-dimensional (3D) printing, and screen printing. PMID:28891947

RESEARCH ASSOCIATED WITH THE DEVELOPMENT OF EPA METHOD 552.2

EPA Science Inventory

The work presented in this paper entails the development of a method for haloacetic acid (HAA) analysis, Environmental Protection Agency (EPA)method 552.2, that improves the saftey and efficiency of previous methods and incorporates three additional trihalogenated acetic acids: b...

Pre-Service Teachers' Opinions about the Course on Scientific Research Methods and the Levels of Knowledge and Skills They Gained in This Course

ERIC Educational Resources Information Center

Tosun, Cemal

2014-01-01

The purpose of this study was to ascertain whether the pre-service teachers taking the Scientific Research Methods course attained basic research knowledge and skills. In addition, the impact of the process, which is followed while implementing the course, on the students' anxiety and attitude during the course is examined. Moreover, the study…

An Authentic Research Experience for Undergraduates on a Budget: Using Data from Simple Experiments to Develop Mini-Research Proposals

ERIC Educational Resources Information Center

Robertson, Katherine

2016-01-01

The benefits of undergraduate research are well documented, and many colleges and universities include a senior research requirement for graduation. In addition, most science curricula attempt to include discoverystyle, laboratory components to prepare students for their research experiences and to expose them to research methods in different…

Methodological considerations related to nurse researchers using their own experience of a phenomenon within phenomenology.

PubMed

Johnston, Colleen M; Wallis, Marianne; Oprescu, Florin I; Gray, Marion

2017-03-01

This paper summarizes phenomenology and discusses how nurses can use their own experiences as data and maintain rigour within the method. It explores how data from researchers experiencing the phenomenon of interest could be used to explicate assumptions and pre-understandings and may also be used as data. While the ethnographic concept of insider research has gained popularity, the notion of researcher as participant in phenomenology is relatively new. The lived experience of a phenomenon is unique to each person and utilization of the nurse researcher's experiences of the phenomenon should be considered for inclusion as data. Discussion paper. Articles from 2001 - 2015 in the CINAHL and PubMed databases were identified using keywords such as 'insider research', 'phenomenology', 'bracketing' and 'qualitative research'. In addition, reference lists from articles used were examined to identify additional literature. Phenomenology is a valuable research method. Usability, credibility, trustworthiness and auditability of data collected must be considered to ensure rigour and maintain orientation to the phenomenon under investigation. Nurse researchers may be interviewed as participants if these four principles are considered and methods used are made explicit. Utilizing appropriate research methods are as important as getting clinical practice correct to advance knowledge and benefit those under our care. We recommend using the researchers' experience as a data source to gain a complete picture of the phenomenon under investigation. Using the approach proposed here, nurses can ensure they are incorporating all data sources available while maintaining research rigour. © 2016 John Wiley & Sons Ltd.

Miracle of an Artificial Pancreas

MedlinePlus

... funded Artificial Pancreas Research Efforts Underway Thanks to investments in new research, new and improved methods for ... it." In addition to easing the burden of management for people with type 1 diabetes or their ...

Large space antenna communications systems: Integrated Langley Research Center/Jet Propulsion Laboratory technology development activities. 1: Introduction

NASA Technical Reports Server (NTRS)

Campbell, T. G.

1983-01-01

The Jet Propulsion Laboratory and the Langley Research Center have been developing technology related to large space antennas (LSA) during the past several years. The need for a communication system research program became apparent during the recent studies for the Land Mobile Satellite System. This study indicated the need for additional research in (1) electromagnetic analysis methods, (2) design and development of multiple beam feed systems, and (3) the measurement methods for LSA reflectors.

Revisiting the Quantitative-Qualitative Debate: Implications for Mixed-Methods Research

PubMed Central

SALE, JOANNA E. M.; LOHFELD, LYNNE H.; BRAZIL, KEVIN

2015-01-01

Health care research includes many studies that combine quantitative and qualitative methods. In this paper, we revisit the quantitative-qualitative debate and review the arguments for and against using mixed-methods. In addition, we discuss the implications stemming from our view, that the paradigms upon which the methods are based have a different view of reality and therefore a different view of the phenomenon under study. Because the two paradigms do not study the same phenomena, quantitative and qualitative methods cannot be combined for cross-validation or triangulation purposes. However, they can be combined for complementary purposes. Future standards for mixed-methods research should clearly reflect this recommendation. PMID:26523073

Peer-Assisted Learning in Research Methods and Statistics

ERIC Educational Resources Information Center

Stone, Anna; Meade, Claire; Watling, Rosamond

2012-01-01

Feedback from students on a Level 1 Research Methods and Statistics module, studied as a core part of a BSc Psychology programme, highlighted demand for additional tutorials to help them to understand basic concepts. Students in their final year of study commonly request work experience to enhance their employability. All students on the Level 1…

Feedstock powder processing research needs for additive manufacturing development

DOE PAGES

Anderson, Iver E.; White, Emma M. H.; Dehoff, Ryan

2018-02-01

Additive manufacturing (AM) promises to redesign traditional manufacturing by enabling the ultimate in agility for rapid component design changes in commercial products and for fabricating complex integrated parts. Here, by significantly increasing quality and yield of metallic alloy powders, the pace for design, development, and deployment of the most promising AM approaches can be greatly accelerated, resulting in rapid commercialization of these advanced manufacturing methods. By successful completion of a critical suite of processing research tasks that are intended to greatly enhance gas atomized powder quality and the precision and efficiency of powder production, researchers can help promote continued rapidmore » growth of AM. Finally, other powder-based or spray-based advanced manufacturing methods could also benefit from these research outcomes, promoting the next wave of sustainable manufacturing technologies for conventional and advanced materials.« less

Feedstock powder processing research needs for additive manufacturing development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Iver E.; White, Emma M. H.; Dehoff, Ryan

Additive manufacturing (AM) promises to redesign traditional manufacturing by enabling the ultimate in agility for rapid component design changes in commercial products and for fabricating complex integrated parts. Here, by significantly increasing quality and yield of metallic alloy powders, the pace for design, development, and deployment of the most promising AM approaches can be greatly accelerated, resulting in rapid commercialization of these advanced manufacturing methods. By successful completion of a critical suite of processing research tasks that are intended to greatly enhance gas atomized powder quality and the precision and efficiency of powder production, researchers can help promote continued rapidmore » growth of AM. Finally, other powder-based or spray-based advanced manufacturing methods could also benefit from these research outcomes, promoting the next wave of sustainable manufacturing technologies for conventional and advanced materials.« less

Evaluation of direct and indirect additive manufacture of maxillofacial prostheses.

PubMed

Eggbeer, Dominic; Bibb, Richard; Evans, Peter; Ji, Lu

2012-09-01

The efficacy of computer-aided technologies in the design and manufacture of maxillofacial prostheses has not been fully proven. This paper presents research into the evaluation of direct and indirect additive manufacture of a maxillofacial prosthesis against conventional laboratory-based techniques. An implant/magnet-retained nasal prosthesis case from a UK maxillofacial unit was selected as a case study. A benchmark prosthesis was fabricated using conventional laboratory-based techniques for comparison against additive manufactured prostheses. For the computer-aided workflow, photogrammetry, computer-aided design and additive manufacture (AM) methods were evaluated in direct prosthesis body fabrication and indirect production using an additively manufactured mould. Qualitative analysis of position, shape, colour and edge quality was undertaken. Mechanical testing to ISO standards was also used to compare the silicone rubber used in the conventional prosthesis with the AM material. Critical evaluation has shown that utilising a computer-aided work-flow can produce a prosthesis body that is comparable to that produced using existing best practice. Technical limitations currently prevent the direct fabrication method demonstrated in this paper from being clinically viable. This research helps prosthesis providers understand the application of a computer-aided approach and guides technology developers and researchers to address the limitations identified.

[Mixed methods research in public health: issues and illustration].

PubMed

Guével, Marie-Renée; Pommier, Jeanine

2012-01-01

For many years, researchers in a range of fields have combined quantitative and qualitative methods. However, the combined use of quantitative and qualitative methods has only recently been conceptualized and defined as mixed methods research. Some authors have described the emerging field as a third methodological tradition (in addition to the qualitative and quantitative traditions). Mixed methods research combines different perspectives and facilitates the study of complex interventions or programs, particularly in public health, an area where interdisciplinarity is critical. However, the existing literature is primarily in English. By contrast, the literature in French remains limited. The purpose of this paper is to present the emergence of mixed methods research for francophone public health specialists. A literature review was conducted to identify the main characteristics of mixed methods research. The results provide an overall picture of the mixed methods approach through its history, definitions, and applications, and highlight the tools developed to clarify the approach (typologies) and to implement it (integration of results and quality standards). The tools highlighted in the literature review are illustrated by a study conducted in France. Mixed methods research opens new possibilities for examining complex research questions and provides relevant and promising opportunities for addressing current public health issues in France.

Using the Integrated Vehicle Health Management Research Test and Integration Plan Wiki to Identify Synergistic Test Opportunities

NASA Technical Reports Server (NTRS)

Koelfgen, Syri J.; Faber, James J.

2010-01-01

The National Aeronautics and Space Administration (NASA) and the aviation industry have recognized a need for developing a method to identify and combine resources to carry out research and testing more efficiently. The Integrated Vehicle Health Management (IVHM) Research Test and Integration Plan (RTIP) Wiki is a tool that is used to visualize, plan, and accomplish collaborative research and testing. Synergistic test opportunities are developed using the RTIP Wiki, and include potential common resource testing that combines assets and personnel from NASA, industry, academia, and other government agencies. A research scenario is linked to the appropriate IVHM milestones and resources detailed in the wiki, reviewed by the research team members, and integrated into a collaborative test strategy. The scenario is then implemented by creating a test plan when appropriate and the research is performed. The benefits of performing collaborative research and testing are achieving higher Technology Readiness Level (TRL) test opportunities with little or no additional cost, improved quality of research, and increased communication among researchers. In addition to a description of the method of creating these joint research scenarios, examples of the successful development and implementation of cooperative research using the IVHM RTIP Wiki are given.

Evaluation and Ranking of Researchers – Bh Index

PubMed Central

Bharathi, D. Gnana

2013-01-01

Evaluation and ranking of every author is very crucial as it is widely used to evaluate the performance of the researcher. This article proposes a new method, called Bh-Index, to evaluate the researchers based on the publications and citations. The method is built on h-Index and only the h-core articles are taken into consideration. The method assigns value additions to those articles that receive significantly high citations in comparison to the h-Index of the researcher. It provides a wide range of values for a given h-Index and effective evaluation even for a short period. Use of Bh-Index along with the h-Index gives a powerful tool to evaluate the researchers. PMID:24349183

Nested Dissection Interface Reconstruction in Pececillo

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jibben, Zechariah Joel; Carlson, Neil N.; Francois, Marianne M.

A nested dissection method for interface reconstruction in a volume tracking framework has been implemented in Pececillo, a mini-app for Truchas, which is the ASC code for casting and additive manufacturing. This method provides a significant improvement over the traditional onion-skin method, which does not appropriately handle T-shaped multimaterial intersections and dynamic contact lines present in additive manufacturing simulations. The resulting implementation lays the groundwork for further research in contact angle estimates and surface tension calculations.

Document co-citation analysis to enhance transdisciplinary research

PubMed Central

Trujillo, Caleb M.; Long, Tammy M.

2018-01-01

Specialized and emerging fields of research infrequently cross disciplinary boundaries and would benefit from frameworks, methods, and materials informed by other fields. Document co-citation analysis, a method developed by bibliometric research, is demonstrated as a way to help identify key literature for cross-disciplinary ideas. To illustrate the method in a useful context, we mapped peer-recognized scholarship related to systems thinking. In addition, three procedures for validation of co-citation networks are proposed and implemented. This method may be useful for strategically selecting information that can build consilience about ideas and constructs that are relevant across a range of disciplines. PMID:29308433

Implementation of Complexity Analyzing Based on Additional Effect

NASA Astrophysics Data System (ADS)

Zhang, Peng; Li, Na; Liang, Yanhong; Liu, Fang

According to the Complexity Theory, there is complexity in the system when the functional requirement is not be satisfied. There are several study performances for Complexity Theory based on Axiomatic Design. However, they focus on reducing the complexity in their study and no one focus on method of analyzing the complexity in the system. Therefore, this paper put forth a method of analyzing the complexity which is sought to make up the deficiency of the researches. In order to discussing the method of analyzing the complexity based on additional effect, this paper put forth two concepts which are ideal effect and additional effect. The method of analyzing complexity based on additional effect combines Complexity Theory with Theory of Inventive Problem Solving (TRIZ). It is helpful for designers to analyze the complexity by using additional effect. A case study shows the application of the process.

Realism and Pragmatism in a mixed methods study.

PubMed

Allmark, Peter; Machaczek, Katarzyna

2018-06-01

A discussion of how adopting a Realist rather than Pragmatist methodology affects the conduct of mixed methods research. Mixed methods approaches are now extensively employed in nursing and other healthcare research. At the same time, realist methodology is increasingly used as philosophical underpinning of research in these areas. However, the standard philosophical underpinning of mixed methods research is Pragmatism, which is generally considered incompatible or at least at odds with Realism. This paper argues that Realism can be used as the basis of mixed methods research and that doing so carries advantages over using Pragmatism. A mixed method study into patient handover reports is used to illustrate how Realism affected its design and how it would have differed had a Pragmatist approach been taken. Discussion Paper. Philosophers Index; Google Scholar. Those undertaking mixed methods research should consider the use of Realist methodology with the addition of some insights from Pragmatism to do with the start and end points of enquiry. Realism is a plausible alternative methodology for those undertaking mixed methods studies. © 2018 John Wiley & Sons Ltd.

Factors Influencing the Research Participation of Adults with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Haas, Kaaren; Costley, Debra; Falkmer, Marita; Richdale, Amanda; Sofronoff, Kate; Falkmer, Torbjörn

2016-01-01

Recruiting adults with autism spectrum disorders (ASD) into research poses particular difficulties; longitudinal studies face additional challenges. This paper reports on a mixed methods study to identify factors influencing the participation in longitudinal autism research of adults with ASD, including those with an intellectual disability, and…

48 CFR 3452.216-70 - Additional cost principles.

Code of Federal Regulations, 2010 CFR

2010-10-01

... practice is to treat these costs by some other method, they may be accepted if they are found to be reasonable and equitable. Bid and proposal costs do not include independent research and development costs or pre-award costs. (b) Independent research and development costs. Independent research and development...

Integrated Flight and Propulsion Controls for Advanced Aircraft Configurations

NASA Technical Reports Server (NTRS)

Merrill, Walter; Garg, Sanjay

1995-01-01

The research vision of the NASA Lewis Research Center in the area of integrated flight and propulsion controls technologies is described. In particular the Integrated Method for Propulsion and Airframe Controls developed at the Lewis Research Center is described including its application to an advanced aircraft configuration. Additionally, future research directions in integrated controls are described.

Integrated Flight and Propulsion Controls for Advanced Aircraft Configurations

NASA Technical Reports Server (NTRS)

Merrill, Walter; Garg, Sanjay

1996-01-01

The research vision of the NASA Lewis Research Center in the area of integrated flight and propulsion controls technologies is described. In particular, the integrated method for propulsion and airframe controls developed at the Lewis Research Center is described including its application to an advanced aircraft configuration. Additionally, future research directions in integrated controls are described.

Qualitative methods in health services and management research: pockets of excellence and progress, but still a long way to go.

PubMed

Devers, Kelly J

2011-02-01

The 10-year systematic review of published health services and management research by Weiner et al. (2011) chronicles the contributions of qualitative methods, highlights areas of substantial progress, and identifies areas in need of more progress. This article (Devers, 2011) discusses possible reasons for lack of progress in some areas--related to the under-supply of well-trained qualitative researchers and more tangible demand for their research--and mechanisms for future improvement. To ensure a robust health services research toolbox, the field must take additional steps to provide stronger education and training in qualitative methods and more funding and publication opportunities. Given the rapidly changing health care system post the passage of national health reform and the chalresearch issues associated with it, the health services research and management field will not meet its future challenges with quantitative methods alone or with a half-empty toolbox.

Essential competencies in global health research for medical trainees: A narrative review.

PubMed

White, Mary T; Satterfield, Caley A; Blackard, Jason T

2017-09-01

Participation in short-term educational experiences in global health (STEGHs) among medical trainees is increasingly accompanied by interest in conducting research while abroad. Because formal training in both global health and research methods is currently under-represented in most medical curricula, trainees are often unfamiliar with the knowledge, attitudes, and skills necessary to design and conduct research successfully. This narrative review identifies essential global health research competencies for medical trainees engaged in STEGHs. The authors searched the literature using the terms global health, competency, research, research methods/process/training, scholarly project, medical student, and medical education/education. Because articles directly addressing global health research competencies for medical trainees were limited, the authors additionally drew on the broader literature addressing general research competencies and global health competencies. Articles yielded by the literature search, combined with established guidelines in research ethics and global health ethics, were used to identify six core domains and twenty discrete competencies fundamental to global health research at a level appropriate for medical trainees enrolled in STEGHs. Consideration was given to diverse research modalities, varying levels of training, and the availability of mentoring and on-site support. Research may provide important benefits to medical trainees and host partners. These competencies provide a starting point; however, circumstances at any host site may necessitate additional competencies specific to that setting. These competencies are also limited by the methodology employed in their development and the need for additional perspectives from host partners. The competencies identified outline basic knowledge, attitudes, and skills necessary for medical trainees to conduct limited global health research while participating in STEGHS. They may also be used as a basis for curriculum development, assessment, and research capacity development.

Radiography Students' Learning: A Literature Review.

PubMed

Holmström, Anneli; Ahonen, Sanna-Mari

2016-01-01

To describe research methodology and findings concerning radiography students' learning. Health sciences databases were searched to perform a traditional narrative literature review. Thirty-five peer-reviewed articles published between 2000 and 2014 were analyzed using thematic analysis. Specific methods of learning were found to be of the most interest. The studies focused primarily on the use and usability of a method or the students' general experiences of it. The most commonly studied methods were e-learning and interprofessional learning, which students perceived as positive methods for theoretical studies and clinical training. Students' learning regarding research was the focus of only one article reporting a wide variety of students' research interests. Most studies reported quantitative research gathered from questionnaires and surveys. Additional research, especially from a qualitative point of view, is needed to deepen the evidence-based knowledge of radiography student learning.

Increasing Inferential Leverage in the Comparative Method: Placebo Tests in Small-"n" Research

ERIC Educational Resources Information Center

Glynn, Adam N.; Ichino, Nahomi

2016-01-01

We delineate the underlying homogeneity assumption, procedural variants, and implications of the comparative method and distinguish this from Mill's method of difference. We demonstrate that additional units can provide "placebo" tests for the comparative method even if the scope of inference is limited to the two units under comparison.…

The storybook method: research feedback with young participants.

PubMed

Anderson, Kate; Balandin, Susan

2011-12-01

Children are valuable informants for social research; however, their participation presents additional ethical and practical challenges. Of these challenges, feedback to verify the researchers' interpretations drawn from children's data, and the dissemination of project findings to young participants, have proven difficult to overcome. In this paper, we outline the Storybook method, an approach to feedback in research with young children. In the example study, illustrations, interactive pop-ups, and third-person disclosure were used to aid children aged 7-9 years to overcome the power imbalance in interviews with adults. The Storybook method facilitated active participation in the validation process. Potential modifications of the method for use with older populations, including adults with intellectual disabilities, complex communication needs, and those requiring alternate access to written texts, are also explored.

Effect of salt additives on concrete degradation (Phase II). Executive summary

DOT National Transportation Integrated Search

1995-02-01

This research builds on a previous investigation, which found that corrosion-inhibitor-added deicing salts caused degradation of concrete by both anions and cations. The latest research phase looked at methods to detect the chemical reactions between...

Games for health for children—Current status and needed research

USDA-ARS?s Scientific Manuscript database

Videogames for health (G4H) offer exciting, innovative, potentially highly effective methods for increasing knowledge, delivering persuasive messages, changing behaviors, and influencing health outcomes. Although early outcome results are promising, additional research is needed to determine the gam...

A Review of Transmission Diagnostics Research at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Zakajsek, James J.

1994-01-01

This paper presents a summary of the transmission diagnostics research work conducted at NASA Lewis Research Center over the last four years. In 1990, the Transmission Health and Usage Monitoring Research Team at NASA Lewis conducted a survey to determine the critical needs of the diagnostics community. Survey results indicated that experimental verification of gear and bearing fault detection methods, improved fault detection in planetary systems, and damage magnitude assessment and prognostics research were all critical to a highly reliable health and usage monitoring system. In response to this, a variety of transmission fault detection methods were applied to experimentally obtained fatigue data. Failure modes of the fatigue data include a variety of gear pitting failures, tooth wear, tooth fracture, and bearing spalling failures. Overall results indicate that, of the gear fault detection techniques, no one method can successfully detect all possible failure modes. The more successful methods need to be integrated into a single more reliable detection technique. A recently developed method, NA4, in addition to being one of the more successful gear fault detection methods, was also found to exhibit damage magnitude estimation capabilities.

Research on teaching methods.

PubMed

Oermann, M H

1990-01-01

Research on teaching methods in nursing education was categorized into studies on media, CAI, and other nontraditional instructional strategies. While the research differed, some generalizations may be made from the findings. Multimedia, whether it is used for individual or group instruction, is at least as effective as traditional instruction (lecture and lecture-discussion) in promoting cognitive learning, retention of knowledge, and performance. Further study is needed to identify variables that may influence learning and retention. While learner attitudes toward mediated instruction tended to be positive, investigators failed to control for the effect of novelty. Control over intervening variables was lacking in the majority of studies as well. Research indicated that CAI is as effective as other teaching methods in terms of knowledge gain and retention. Attitudes toward CAI tended to be favorable, with similar problems in measurement as those evidenced in studies of media. Chang (1986) also recommends that future research examine the impact of computer-video interactive instruction on students, faculty, and settings. Research is needed on experimental teaching methods, strategies for teaching problem solving and clinical judgment, and ways of improving the traditional lecture and discussion. Limited research in these areas makes generalizations impossible. There is a particular need for research on how to teach students the diagnostic reasoning process and encourage critical thinking, both in terms of appropriate teaching methods and the way in which those strategies should be used. It is interesting that few researchers studied lecture and lecture-discussion except as comparable teaching methods for research on other strategies. Additional research questions may be generated on lecture and discussion in relation to promoting concept learning, an understanding of nursing and other theories, transfer of knowledge, and development of cognitive skills. Few studies attempted to identify variables that may influence learning, particularly characteristics of the learner. Only six investigators addressed learning styles and their interactions with the teaching method and outcomes (Gillies, 1984; Goldsmith, 1984; Kirchhoff & Holzemer, 1979; Kissinger & Munjas, 1981; Norris, 1986; Stein et al., 1972). Research in the future needs to focus on the relationship of different learner characteristics, attributes of the teaching method, and learning outcomes. In addition, initial learning, retention, transfer to practice, and instructional time should be studied. Characteristics of the teacher and setting and relationship to the methodologies used and outcomes of instruction need investigation. Research should attempt to identify optimal conditions for learning and ways in which methods should be used for particular students, subject matter, and points in the nursing curriculum...

The methods of receiving coal water suspension and its use as the modifying additive in concrete

NASA Astrophysics Data System (ADS)

Buyantuyev, S. L.; Urkhanova, L. A.; Lkhasaranov, S. A.; Stebenkova, Y. Y.; Khmelev, A. B.; Kondratenko, A. S.

2017-01-01

Results of research of the coal water suspension (CWS) from a cake received in the electrodigit ways in the fluid environment and gas are given in article and also the possibilities of its use as the modifying additive in concrete are considered. Use of a coal cake is perspective as it is a withdrawal of the coal and concentrating enterprises and has extremely low cost. Methods of receiving CWS and possibility of formation of carbon nanomaterials (CNM) are given in their structure. Research and the analysis of a microstructure of a surface of exemplars before electrodigit processing, their element structure, dependence of durability of a cement stone on a look and quantity of an additive of CWS is conducted. For modification of cement the carbon nanomaterials received from the following exemplars of water coal suspensions were used: foams from a cake from a scrubber of the plasma modular reactor, coal water suspension from a cake from electrodigit installation. The product which can find further application for a power engineering as fuel for combustion, and also in structural materials science, in particular, as the modifying additive in concrete allows to receive these methods.

Learning Method and Its Influence on Nutrition Study Results Throwing the Ball

ERIC Educational Resources Information Center

Samsudin; Nugraha, Bayu

2015-01-01

This study aimed to know the difference between playing and learning methods of exploratory learning methods to learning outcomes throwing the ball. In addition, this study also aimed to determine the effect of nutritional status of these two learning methods mentioned above. This research was conducted at SDN Cipinang Besar Selatan 16 Pagi East…

Further Insight and Additional Inference Methods for Polynomial Regression Applied to the Analysis of Congruence

ERIC Educational Resources Information Center

Cohen, Ayala; Nahum-Shani, Inbal; Doveh, Etti

2010-01-01

In their seminal paper, Edwards and Parry (1993) presented the polynomial regression as a better alternative to applying difference score in the study of congruence. Although this method is increasingly applied in congruence research, its complexity relative to other methods for assessing congruence (e.g., difference score methods) was one of the…

Qualitative research methods in renal medicine: an introduction.

PubMed

Bristowe, Katherine; Selman, Lucy; Murtagh, Fliss E M

2015-09-01

Qualitative methodologies are becoming increasingly widely used in health research. However, within some specialties, including renal medicine, qualitative approaches remain under-represented in the high-impact factor journals. Qualitative research can be undertaken: (i) as a stand-alone research method, addressing specific research questions; (ii) as part of a mixed methods approach alongside quantitative approaches or (iii) embedded in clinical trials, or during the development of complex interventions. The aim of this paper is to introduce qualitative research, including the rationale for choosing qualitative approaches, and guidance for ensuring quality when undertaking and reporting qualitative research. In addition, we introduce types of qualitative data (observation, interviews and focus groups) as well as some of the most commonly encountered methodological approaches (case studies, ethnography, phenomenology, grounded theory, thematic analysis, framework analysis and content analysis). © The Author 2015. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Beyond Compliance Checking: A Situated Approach to Visual Research Ethics.

PubMed

Lenette, Caroline; Botfield, Jessica R; Boydell, Katherine; Haire, Bridget; Newman, Christy E; Zwi, Anthony B

2018-03-19

Visual research methods like photography and digital storytelling are increasingly used in health and social sciences research as participatory approaches that benefit participants, researchers, and audiences. Visual methods involve a number of additional ethical considerations such as using identifiable content and ownership of creative outputs. As such, ethics committees should use different assessment frameworks to consider research protocols with visual methods. Here, we outline the limitations of ethics committees in assessing projects with a visual focus and highlight the sparse knowledge on how researchers respond when they encounter ethical challenges in the practice of visual research. We propose a situated approach in relation to visual methodologies that encompasses a negotiated, flexible approach, given that ethical issues usually emerge in relation to the specific contexts of individual research projects. Drawing on available literature and two case studies, we identify and reflect on nuanced ethical implications in visual research, like tensions between aesthetics and research validity. The case studies highlight strategies developed in-situ to address the challenges two researchers encountered when using visual research methods, illustrating that some practice implications are not necessarily addressed using established ethical clearance procedures. A situated approach can ensure that visual research remains ethical, engaging, and rigorous.

Evaluation of contents-based image retrieval methods for a database of logos on drug tablets

NASA Astrophysics Data System (ADS)

Geradts, Zeno J.; Hardy, Huub; Poortman, Anneke; Bijhold, Jurrien

2001-02-01

In this research an evaluation has been made of the different ways of contents based image retrieval of logos of drug tablets. On a database of 432 illicitly produced tablets (mostly containing MDMA), we have compared different retrieval methods. Two of these methods were available from commercial packages, QBIC and Imatch, where the implementation of the contents based image retrieval methods are not exactly known. We compared the results for this database with the MPEG-7 shape comparison methods, which are the contour-shape, bounding box and region-based shape methods. In addition, we have tested the log polar method that is available from our own research.

Qualitative Comparative Analysis: A Hybrid Method for Identifying Factors Associated with Program Effectiveness.

PubMed

Cragun, Deborah; Pal, Tuya; Vadaparampil, Susan T; Baldwin, Julie; Hampel, Heather; DeBate, Rita D

2016-07-01

Qualitative comparative analysis (QCA) was developed over 25 years ago to bridge the qualitative and quantitative research gap. Upon searching PubMed and the Journal of Mixed Methods Research , this review identified 30 original research studies that utilized QCA. Perceptions that QCA is complex and provides few relative advantages over other methods may be limiting QCA adoption. Thus, to overcome these perceptions, this article demonstrates how to perform QCA using data from fifteen institutions that implemented universal tumor screening (UTS) programs to identify patients at high risk for hereditary colorectal cancer. In this example, QCA revealed a combination of conditions unique to effective UTS programs. Results informed additional research and provided a model for improving patient follow-through after a positive screen.

Qualitative research and the profound grasp of the obvious.

PubMed Central

Hurley, R E

1999-01-01

OBJECTIVE: To discuss the value of promoting coexistent and complementary relationships between qualitative and quantitative research methods as illustrated by presentations made by four respected health services researchers who described their experiences in multi-method projects. DATA SOURCES: Presentations and publications related to the four research projects, which described key substantive and methodological areas that had been addressed with qualitative techniques. PRINCIPAL FINDINGS: Sponsor interest in timely, insightful, and reality-anchored evidence has provided a strong base of support for the incorporation of qualitative methods into major contemporary policy research studies. In addition, many issues may be suitable for study only with qualitative methods because of their complexity, their emergent nature, or because of the need to revisit and reexamine previously untested assumptions. CONCLUSION: Experiences from the four projects, as well as from other recent health services studies with major qualitative components, support the assertion that the interests of sponsors in the policy realm and pressure from them suppress some of the traditional tensions and antagonisms between qualitative and quantitative methods. PMID:10591276

Parental Perception of a Baby Sign Workshop on Stress and Parent-Child Interaction

ERIC Educational Resources Information Center

Mueller, Vannesa; Sepulveda, Amanda

2014-01-01

Introduction: Baby sign language is gaining in popularity. However, research has indicated a lack of empirical research supporting its use. In addition, research suggests that baby sign training may increase stress levels in parents. Methods: Nine families with children ranging in age from six months to two years; five months participated in a…

Research Methods Tutor: evaluation of a dialogue-based tutoring system in the classroom.

PubMed

Arnott, Elizabeth; Hastings, Peter; Allbritton, David

2008-08-01

Research Methods Tutor (RMT) is a dialogue-based intelligent tutoring system for use in conjunction with undergraduate psychology research methods courses. RMT includes five topics that correspond to the curriculum of introductory research methods courses: ethics, variables, reliability, validity, and experimental design. We evaluated the effectiveness of the RMT system in the classroom using a nonequivalent control group design. Students in three classes (n = 83) used RMT, and students in two classes (n = 53) did not use RMT. Results indicated that the use of RMT yieldedstrong learning gains of 0.75 standard deviations above classroom instruction alone. Further, the dialogue-based tutoring condition of the system resulted in higher gains than did the textbook-style condition (CAI version) of the system. Future directions for RMT include the addition of new topics and tutoring elements.

"Everyone Needs an Art Education": Developing Leadership through Positive Attitudes toward Art Methods Courses

ERIC Educational Resources Information Center

Manifold, Marjorie; Zimmerman, Enid

2011-01-01

Research about K-6 generalists, elementary, preservice majors in teacher education programs often emphasizes students who are resistant to art methods courses, although Galbraith (1991) and Gibson (2003) found some elementary majors held positive views about art methods courses. In addition, instructors who are frustrated by students who respond…

The potential use of social media and other internet-related data and communications for child maltreatment surveillance and epidemiological research: Scoping review and recommendations.

PubMed

Schwab-Reese, Laura M; Hovdestad, Wendy; Tonmyr, Lil; Fluke, John

2018-01-20

Collecting child maltreatment data is a complicated undertaking for many reasons. As a result, there is an interest by child maltreatment researchers to develop methodologies that allow for the triangulation of data sources. To better understand how social media and internet-based technologies could contribute to these approaches, we conducted a scoping review to provide an overview of social media and internet-based methodologies for health research, to report results of evaluation and validation research on these methods, and to highlight studies with potential relevance to child maltreatment research and surveillance. Many approaches were identified in the broad health literature; however, there has been limited application of these approaches to child maltreatment. The most common use was recruiting participants or engaging existing participants using online methods. From the broad health literature, social media and internet-based approaches to surveillance and epidemiologic research appear promising. Many of the approaches are relatively low cost and easy to implement without extensive infrastructure, but there are also a range of limitations for each method. Several methods have a mixed record of validation and sources of error in estimation are not yet understood or predictable. In addition to the problems relevant to other health outcomes, child maltreatment researchers face additional challenges, including the complex ethical issues associated with both internet-based and child maltreatment research. If these issues are adequately addressed, social media and internet-based technologies may be a promising approach to reducing some of the limitations in existing child maltreatment data. Copyright © 2018 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Estimating health state utility values for comorbid health conditions using SF-6D data.

PubMed

Ara, Roberta; Brazier, John

2011-01-01

When health state utility values for comorbid health conditions are not available, data from cohorts with single conditions are used to estimate scores. The methods used can produce very different results and there is currently no consensus on which is the most appropriate approach. The objective of the current study was to compare the accuracy of five different methods within the same dataset. Data collected during five Welsh Health Surveys were subgrouped by health status. Mean short-form 6 dimension (SF-6D) scores for cohorts with a specific health condition were used to estimate mean SF-6D scores for cohorts with comorbid conditions using the additive, multiplicative, and minimum methods, the adjusted decrement estimator (ADE), and a linear regression model. The mean SF-6D for subgroups with comorbid health conditions ranged from 0.4648 to 0.6068. The linear model produced the most accurate scores for the comorbid health conditions with 88% of values accurate to within the minimum important difference for the SF-6D. The additive and minimum methods underestimated or overestimated the actual SF-6D scores respectively. The multiplicative and ADE methods both underestimated the majority of scores. However, both methods performed better when estimating scores smaller than 0.50. Although the range in actual health state utility values (HSUVs) was relatively small, our data covered the lower end of the index and the majority of previous research has involved actual HSUVs at the upper end of possible ranges. Although the linear model gave the most accurate results in our data, additional research is required to validate our findings. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Additive manufacturing for steels: a review

NASA Astrophysics Data System (ADS)

Zadi-Maad, A.; Rohib, R.; Irawan, A.

2018-01-01

Additive manufacturing (AM) of steels involves the layer by layer consolidation of powder or wire feedstock using a heating beam to form near net shape products. For the past decades, the AM technique reaches the maturation of both research grade and commercial production due to significant research work from academic, government and industrial research organization worldwide. AM process has been implemented to replace the conventional process of steel fabrication due to its potentially lower cost and flexibility manufacturing. This paper provides a review of previous research related to the AM methods followed by current challenges issues. The relationship between microstructure, mechanical properties, and process parameters will be discussed. Future trends and recommendation for further works are also provided.

An application of a hybrid MCDM method for the evaluation of entrepreneurial intensity among the SMEs: a case study.

PubMed

Rostamzadeh, Reza; Ismail, Kamariah; Bodaghi Khajeh Noubar, Hossein

2014-01-01

This study presents one of the first attempts to focus on critical success factors influencing the entrepreneurial intensity of Malaysian small and medium sized enterprises (SMEs) as they attempt to expand internationally. The aim of this paper is to evaluate and prioritize the entrepreneurial intensity among the SMEs using multicriteria decision (MCDM) techniques. In this research FAHP is used for finding the weights of criteria and subcriteria. Then for the final ranking of the companies, VIKOR (in Serbian: VlseKriterijumska Optimizacija I Kompromisno Resenje) method was used. Also, as an additional tool, TOPSIS technique, is used to see the differences of two methods applied over the same data. 5 main criteria and 14 subcriteria were developed and implemented in the real-world cases. As the results showed, two ranking methods provided different ranking. Furthermore, the final findings of the research based on VIKOR and TOPSIS indicated that the firms A3 and A4 received the first rank, respectively. In addition, the firm A4 was known as the most entrepreneurial company. This research has been done in the manufacturing sector, but it could be also extended to the service sector for measurement.

An Application of a Hybrid MCDM Method for the Evaluation of Entrepreneurial Intensity among the SMEs: A Case Study

PubMed Central

Ismail, Kamariah; Bodaghi Khajeh Noubar, Hossein

2014-01-01

This study presents one of the first attempts to focus on critical success factors influencing the entrepreneurial intensity of Malaysian small and medium sized enterprises (SMEs) as they attempt to expand internationally. The aim of this paper is to evaluate and prioritize the entrepreneurial intensity among the SMEs using multicriteria decision (MCDM) techniques. In this research FAHP is used for finding the weights of criteria and subcriteria. Then for the final ranking of the companies, VIKOR (in Serbian: VlseKriterijumska Optimizacija I Kompromisno Resenje) method was used. Also, as an additional tool, TOPSIS technique, is used to see the differences of two methods applied over the same data. 5 main criteria and 14 subcriteria were developed and implemented in the real-world cases. As the results showed, two ranking methods provided different ranking. Furthermore, the final findings of the research based on VIKOR and TOPSIS indicated that the firms A3 and A4 received the first rank, respectively. In addition, the firm A4 was known as the most entrepreneurial company. This research has been done in the manufacturing sector, but it could be also extended to the service sector for measurement. PMID:25197707

Research to support sterile-male-release and genetic alteration techniques for sea lamprey control

USGS Publications Warehouse

Bergstedt, Roger A.; Twohey, Michael B.

2007-01-01

Integrated pest management of sea lampreys in the Laurentian Great Lakes has recently been enhanced by addition of a sterile-male-release program, and future developments in genetic approaches may lead to additional methods for reducing sea lamprey reproduction. We review the development, implementation, and evaluation of the sterile-male-release technique (SMRT) as it is being applied against sea lampreys in the Great Lakes, review the current understanding of SMRT efficacy, and identify additional research areas and topics that would increase either the efficacy of the SMRT or expand its geographic potential for application. Key areas for additional research are in the sterilization process, effects of skewed sex ratios on mating behavior, enhancing attractiveness of sterilized males, techniques for genetic alteration of sea lampreys, and sources of animals to enhance or expand the use of sterile lampreys.

Promoting an egalitarian approach to research with vulnerable populations of women.

PubMed

Mkandawire-Valhmu, Lucy; Rice, Elizabeth; Bathum, Mary Elizabeth

2009-08-01

This paper is a presentation of issues that arise when conducting research with women from vulnerable populations. Conducting research with ethnic minority populations has accentuated the challenges inherent in research, particularly when the populations participating are considered 'vulnerable' due to additional variables such as low levels of income. The paper is based on the experiences of three authors using feminist methods in separate but similar research trajectories that include (a) low-income women in the Southern African country of Malawi, (b) women diagnosed with schizophrenia in the United States of America, and (c) rural, indigenous Aymara women of the highlands of Peru. The data forming the basis of this paper were collected over 3- to 6-month periods between 2005 and 2006. We examine the impact of the researcher's power on the research process. Our research provides examples that illuminate the limitations of informed consent in research with vulnerable populations of women. We offer critical questions about and recommendations for nursing and other health care researchers, both in the third world and the western world, regarding appropriate research methods with vulnerable populations: methods that acknowledge the oppressive realities of the participants, methods that deliberately avoid further marginalization of participants, and methods that have the potential to improve the life situations of the women who participate in our research. These examples show the need for new methods to ensure that participants in research understand their role and the benefits they may expect to receive from research.

Simulating the Historical Process To Create Laboratory Exercises That Teach Research Methods.

ERIC Educational Resources Information Center

Alcock, James

1994-01-01

Explains how controlling student access to data can be used as a strategy enabling students to take the role of a research geologist. Students develop models based on limited data and conduct field tests by comparing their predictions with the additional data. (DDR)

Adding results to a meta-analysis: Theory and example

NASA Astrophysics Data System (ADS)

Willson, Victor L.

Meta-analysis has been used as a research method to describe bodies of research data. It promotes hypothesis formation and the development of science education laws. A function overlooked, however, is the role it plays in updating research. Methods to integrate new research with meta-analysis results need explication. A procedure is presented using Bayesian analysis. Research in science education attitude correlation with achievement has been published after a recent meta-analysis of the topic. The results show how new findings complement the previous meta-analysis and extend its conclusions. Additional methodological questions adddressed are how studies are to be weighted, which variables are to be examined, and how often meta-analysis are to be updated.

A comparison of trends in research into home care services in Japan and Korea

PubMed Central

2013-01-01

Background The purpose of this study is to compare of the research trends for home care services in Japan and the Republic of Korea (Korea). In particular, it was compared as the research design, the method of data collection, and key words by literature review. Methods Original articles on home care services were selected from Japanese and Korean journals published from the year of 2004 to 2008. The articles were classified, and compared in terms of the number of articles per year. Results The research design was quite different. Quantitative research design was dominantly conducted in Korea, qualitative research design was used same level of design in Japan. In particular, outcome study was shown in Korean. Conclusions It is suggested that future collaboration be undertaken to improve the variety of research design and method especially in both countries under the aged society. In addition, it provides information concerning research concepts, which can be applied to optimize future home care services. PMID:23870373

Airframe self-noise: Four years of research. [aircraft noise reduction for commercial aircraft

NASA Technical Reports Server (NTRS)

Hardin, J. C.

1976-01-01

A critical assessment of the state of the art in airframe self-noise is presented. Full-scale data on the intensity, spectra and directivity of this noise source are evaluated in the light of the comprehensive theory developed by Ffowcs-Williams and Hawkins. Vibration of panels on commercial aircraft is identified as a possible additional source of airframe noise. The present understanding and methods for prediction of other component sources - airfoils, struts, and cavities - are discussed, and areas for further research as well as potential methods for airframe noise reduction are identified. Finally, the various experimental methods which have been developed for airframe noise research are discussed and sample results are presented.

Regenerative Medicine: Creating the Future for Military Medicine

DTIC Science & Technology

2009-08-01

research institutes, and/or small/large businesses by identifying and facilitating appropriate partnerships as well as recommending more targeted...cells without the need for prolonged culture periods to expand the cell populations. In addition, the researchers have found a method that will induce...Regenerative Medicine CREATING THE FUTURE FOR MILITARY MEDICINE U.S. ARMY MEDICAL RESEARCH & MATERIEL COMMAND (USAMRMC) TELEMEDICINE & ADVANCED

Participation in Research Program: A Novel Course in Undergraduate Education of Life Science

ERIC Educational Resources Information Center

Zhou, Xuanwei; Lin, Juan; Yin, Yizhou; Sun, Xiaofen; Tang, Kexuan

2007-01-01

A novel course, "Participation in Research Program (PRP)" in life sciences is open for 1st to 3rd year undergraduates. PRP introduces the principles of a variety of biological methods and techniques and also offers an opportunity to explore some specific knowledge in more detail prior to thesis research. In addition, the PRP introduces some…

Activity Approach to the Formation of the Method of Addition and Subtraction in Elementary Students

ERIC Educational Resources Information Center

Maksimov, L. K.; Maksimova, L. V.

2013-01-01

One of the main tasks in teaching mathematics to elementary students is to form calculating methods and techniques. The efforts of teachers and methodologists are aimed at solving this problem. Educational and psychological research is devoted to it. At the same time school teaching experience demonstrates some difficulties in learning methods of…

Qualitative Comparative Analysis: A Hybrid Method for Identifying Factors Associated with Program Effectiveness

PubMed Central

Cragun, Deborah; Pal, Tuya; Vadaparampil, Susan T.; Baldwin, Julie; Hampel, Heather; DeBate, Rita D.

2015-01-01

Qualitative comparative analysis (QCA) was developed over 25 years ago to bridge the qualitative and quantitative research gap. Upon searching PubMed and the Journal of Mixed Methods Research, this review identified 30 original research studies that utilized QCA. Perceptions that QCA is complex and provides few relative advantages over other methods may be limiting QCA adoption. Thus, to overcome these perceptions, this article demonstrates how to perform QCA using data from fifteen institutions that implemented universal tumor screening (UTS) programs to identify patients at high risk for hereditary colorectal cancer. In this example, QCA revealed a combination of conditions unique to effective UTS programs. Results informed additional research and provided a model for improving patient follow-through after a positive screen. PMID:27429602

Using internet-based approaches to collect qualitative data from vulnerable groups: reflections from the field.

PubMed

Neville, Stephen; Adams, Jeffery; Cook, Catherine

2016-12-01

Undertaking qualitative research with vulnerable populations is a complex and challenging process for researchers. Traditional and common modes of collecting qualitative data with these groups have been via face-to-face recorded interviews. This article reports on three internet-based data collection methods; email and synchronous online interviews, as well as online qualitative survey. The key characteristics of using email, sychronous online interviews and an online qualitative survey including the strengths and limitations of each are presented. Reflections and insights on the use of these internet-based data collection methods are provided to encourage researchers to embrace technology and move away from using traditional face-to-face interviews when researching with vulnerable populations. Using the internet to collect qualitative data offers additional ways to gather qualitative data over traditional data collection methods. The use of alternative interview methods may encourage participation of vulnerable participants.

Frederick National Laboratory Rallies to Meet Demand for Zika Vaccine | Frederick National Laboratory for Cancer Research

Cancer.gov

The Frederick National Laboratory for Cancer Research is producing another round of Zika vaccine for ongoing studies to determine the best delivery method and dosage. This will lay the groundwork for additional tests to see if the vaccine prevents i

Using mixed methods when researching communities.

PubMed

Ochieng, Bertha M N; Meetoo, Danny

2015-09-01

To argue for the use of mixed methods when researching communities. Although research involving minority communities is now advanced, not enough effort has been made to formulate methodological linkages between qualitative and quantitative methods in most studies. For instance, the quantitative approaches used by epidemiologists and others in examining the wellbeing of communities are usually empirical. While the rationale for this is sound, quantitative findings can be expanded with data from in-depth qualitative approaches, such as interviews or observations, which are likely to provide insights into the experiences of people in those communities and their relationships with their wellbeing. Academic databases including The Cochrane Library, MEDLINE, CINAHL, AMED, INTERNURSE, Science Direct, Web of Knowledge and PubMed. An iterative process of identifying eligible literature was carried out by comprehensively searching electronic databases. Using mixed-methods approaches is likely to address any potential drawbacks of individual methods by exploiting the strengths of each at the various stages of research. Combining methods can provide additional ways of looking at a complex problem and improve the understanding of a community's experiences. However, it is important for researchers to use the different methods interactively during their research. The use of qualitative and quantitative methods is likely to enrich our understanding of the interrelationship between wellbeing and the experiences of communities. This should help researchers to explore socio-cultural factors and experiences of health and healthcare practice more effectively.

Developing design methods of concrete mix with microsilica additives for road construction

NASA Astrophysics Data System (ADS)

Dmitrienko, Vladimir; Shrivel, Igor; Kokunko, Irina; Pashkova, Olga

2017-10-01

Based on the laboratory test results, regression equations having standard cone and concrete strength, to determine the available amount of cement, water and microsilica were obtained. The joint solution of these equations allowed the researchers to develop the algorithm of designing heavy concrete compositions with microsilica additives for road construction.

The Use of ICT in Kindergarten for Teaching Addition Based on Realistic Mathematics Education

ERIC Educational Resources Information Center

Zaranis, Nicholas

2016-01-01

The purpose of this study is to investigate if information and communications technology (ICT) helps improve kindergarten students' basic mathematical achievement regarding addition. Our research compares the level of mathematical competence of the students taught using our ICT oriented learning method which specifically takes advantage of…

How and Why Do IT Entrepreneurs Leave Their Salaried Employment to Start a SME? A Mixed Methods Research Design

NASA Astrophysics Data System (ADS)

Mourmant, Gaëtan

This method paper addresses an untapped but important type of IT turnover: IT entrepreneurship. We seek to develop a mixed methods research (MMR) design to understand the factors and processes that influence turnover behavior of prospective (nascent) IT entrepreneurs. To do this, we review two prior streams of research: the entrepreneurship literature and IT employee turnover. We incorporate the results of this literature review into a conceptual framework describing how the relevant factors leading to entrepreneurial and turnover behavior change over time, either gradually or suddenly, in response to specific events. In addition, we also contribute to the research by arguing that mixed methods research (MMR) is appropriate to bridge the gap between entrepreneurial literature and the IT turnover literature. A third important contribution is the design of the MMR, combining a longitudinal approach with a retrospective approach; a qualitative with a quantitative approach and, the exploratory design with the triangulation design [1]. Finally, we discuss practical implications for IT managers and IT entrepreneurs.

Warm-Up Effect in Panelist-Articulated-2-Alternative Forced Choice Test.

PubMed

Bloom, David J; Baik, Hwa-Young; Lee, Soo-Yeun

2018-01-01

Panelist performance in discrimination tests has been shown to increase when warm-up samples are provided prior to the actual test. Samples are used prior to the actual test for the attribute articulation process of a panelist-articulated-2-alternative forced choice (PA-2-AFC) procedure; however, it is yet unknown if the pretest articulation phase adds to the power of this testing method as with the warm-up. The goal of the study was to determine if a "warm-up" effect was displayed in the PA-2-AFC test resulting in greater power compared to the researcher-designated-2-AFC (RD-2-AFC) test. A RD-2-AFC test, with and without warm-up samples, and a PA-2-AFC test were performed by 61 panelists. A reduced calorie, citrus-flavored, and carbonated beverage was used in the tests. During RD-2-AFC testing, panelists were asked to identify which sample was more sour. For PA-2-AFC testing, panelists individually articulated the nature and direction of the difference between the 2 samples through a pretesting articulation procedure. The articulated difference was, then, used in standard 2-AFC test procedure. A warm-up effect was observed when comparing the standard RD-2-AFC with and without warm-up samples. The addition of warm up samples significantly increased the power of the test, in addition, the PA-2-AFC method had lower power than the RD-2-AFC method. The increase in power with the addition of warm-up samples for the RD-2-AFC procedure supports literature findings on the benefit of providing warm-up samples. No warm-up effect can be attributed to the PA-2-AFC method evidenced by the overall low power observed, which may be attributed to sample complexity. Selecting a specified discrimination testing method is advantageous and can reduce costs of sensory testing, but has been considered unpractical when samples may differ in unknown ways. This research explores the use of panelist derived terms to circumvent the need for researchers to identify these differences and compares the results to using research designated terms in discrimination testing. Results from this study can be utilized in creating ways to incorporate more powerful methods into sensory discrimination testing plans and provides researchers with a means for selecting terms for use in specified discrimination testing methods. © 2017 Institute of Food Technologists®.

Development of salt production technology using prism greenhouse method

NASA Astrophysics Data System (ADS)

Guntur, G.; Jaziri, A. A.; Prihanto, A. A.; Arisandi, D. M.; Kurniawan, A.

2018-01-01

The main problem of salt production in Indonesia is low productivity and quality because the technology used commonly by Indonesian salt farmers is traditional method. This research aims to increase production of salt by using the prism greenhouse method. The prism greenhouse method is a salt production system with a combination of several salt production technologies, including geomembrane, threaded filter, and prism greenhouse technology. This research method used descriptive method. The results of this study were the productivity increased threefold, and the quality of salt produced also increased in terms of the content of NaCl from 85% to 95%. In addition, salt production with the prism greenhouse method has several advantages, such as faster harvest time, weather resistance, easy to use, and higher profit than traditional methods.

Coherent Raman spectroscopy for supersonic flow measurments

NASA Technical Reports Server (NTRS)

She, C. Y.

1986-01-01

In collaboration with NASA/Langley Research Center, a truly nonintrusive and nonseeding method for measuring supersonic molecular flow parameters was proposed and developed at Colorado State University. The feasibility of this Raman Doppler Velocimetry (RDV), currently operated in a scanning mode, was demonstrated not only in a laboratory environment at Colorado State University, but also in a major wind tunnel at NASA/Langley Research Center. The research progress of the RDV development is summarized. In addition, methods of coherent Rayleigh-Brillouin spectroscopy and single-pulse coherent Raman spectroscopy are investigated, respectively, for measurements of high-pressure and turbulent flows.

Expected net present value of sample information: from burden to investment.

PubMed

Hall, Peter S; Edlin, Richard; Kharroubi, Samer; Gregory, Walter; McCabe, Christopher

2012-01-01

The Expected Value of Information Framework has been proposed as a method for identifying when health care technologies should be immediately reimbursed and when any reimbursement should be withheld while awaiting more evidence. This framework assesses the value of obtaining additional evidence to inform a current reimbursement decision. This represents the burden of not having the additional evidence at the time of the decision. However, when deciding whether to reimburse now or await more evidence, decision makers need to know the value of investing in more research to inform a future decision. Assessing this value requires consideration of research costs, research time, and what happens to patients while the research is undertaken and after completion. The investigators describe a development of the calculation of the expected value of sample information that assesses the value of investing in further research, including an only-in-research strategy and an only-with-research strategy.

Tobacco documents research methodology

PubMed Central

McCandless, Phyra M; Klausner, Kim; Taketa, Rachel; Yerger, Valerie B

2011-01-01

Tobacco documents research has developed into a thriving academic enterprise since its inception in 1995. The technology supporting tobacco documents archiving, searching and retrieval has improved greatly since that time, and consequently tobacco documents researchers have considerably more access to resources than was the case when researchers had to travel to physical archives and/or electronically search poorly and incompletely indexed documents. The authors of the papers presented in this supplement all followed the same basic research methodology. Rather than leave the reader of the supplement to read the same discussion of methods in each individual paper, presented here is an overview of the methods all authors followed. In the individual articles that follow in this supplement, the authors present the additional methodological information specific to their topics. This brief discussion also highlights technological capabilities in the Legacy Tobacco Documents Library and updates methods for organising internal tobacco documents data and findings. PMID:21504933

A critical review of accounting and economic methods for estimating the costs of addiction treatment.

PubMed

Cartwright, William S

2008-04-01

Researchers have been at the forefront of applying new costing methods to drug abuse treatment programs and innovations. The motivation for such work has been to improve costing accuracy. Recent work has seen applications initiated in establishing charts of account and cost accounting for service delivery. As a result, researchers now have available five methods to apply to the costing of drug abuse treatment programs. In all areas of costing, there is room for more research on costing concepts and measurement applications. Additional work would be useful in establishing studies with activity-based costing for both research and managerial purposes. Studies of economies of scope are particularly relevant because of the integration of social services and criminal justice in drug abuse treatment. In the long run, managerial initiatives to improve the administration and quality of drug abuse treatment will benefit directly from research with new information on costing techniques.

Computer-Based Methods for Collecting Peer Nomination Data: Utility, Practice, and Empirical Support.

PubMed

van den Berg, Yvonne H M; Gommans, Rob

2017-09-01

New technologies have led to several major advances in psychological research over the past few decades. Peer nomination research is no exception. Thanks to these technological innovations, computerized data collection is becoming more common in peer nomination research. However, computer-based assessment is more than simply programming the questionnaire and asking respondents to fill it in on computers. In this chapter the advantages and challenges of computer-based assessments are discussed. In addition, a list of practical recommendations and considerations is provided to inform researchers on how computer-based methods can be applied to their own research. Although the focus is on the collection of peer nomination data in particular, many of the requirements, considerations, and implications are also relevant for those who consider the use of other sociometric assessment methods (e.g., paired comparisons, peer ratings, peer rankings) or computer-based assessments in general. © 2017 Wiley Periodicals, Inc.

On the Need for Practical Formal Methods

DTIC Science & Technology

1998-01-01

additional research and engineering that is needed to make the current set of formal methods more practical. To illustrate the ideas, I present several exam ...either a good violin or a highly talented violinist. Light-weight techniques o er software developers good violins . A user need not be a talented

Research in the perianesthesia setting: the basics of getting started.

PubMed

Myers, Gina; Kosinski, Michele

2005-02-01

Research can be defined as a process that systematically investigates a situation with the objective of expanding the existing knowledge of a profession. Research asks the question "Does what we do as nurses help or hinder?" The purpose of this article is to provide a brief history of nursing research and to review basic research methods. In addition, examples of potential research projects focused in the perianesthesia practice arena will be explored. Practical steps will be outlined to guide novice nurse researchers in their early endeavors.

78 FR 39670 - World Trade Center Health Program; Addition of Prostate Cancer to the List of WTC-Related Health...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

... International Agency for Research on Cancer (IARC). http://monographs.iarc.fr/ . Accessed May 15, 2013. Method 1... comments by any of the following methods: Federal eRulemaking Portal: http://www.regulations.gov . Follow.... Rulemaking History C. Methods Used by the Administrator To Determine Whether To Add Cancer or Types of Cancer...

[Progress of researches on mechanism of acupuncture therapy underlying improvement of acute cerebral hemorrhage].

PubMed

Wang, Fan; Wang, Hai-qiao; Dong, Gui-rong

2011-04-01

In the present paper, the authors review the progress of researches on the mechanism of acupuncture therapy underlying improvement of acute cerebral hemorrhage from experimental studies and research methods. The effects of acupuncture intervention mainly involve (1) lessening inflammatory reactions, (2) reducing impairment of free radicals and excitatory amino acids on cerebral neurons, (3) balancing release of vascular bioactive substances to increase regional cerebral blood flow, and (4) promoting repair and regeneration of the neural tissue, etc. In regard to the research methods, many new biological techniques such as biological molecular approaches, neuro-cellular chemical methods, reverse transcription-polymerase chain reaction (RT-PCR) or quantitative real time-PCR, situ hybridization, western blotting, electron microscope, etc., have been extensively applied to researches on the underlying mechanism of acupuncture therapy for cerebral infarction. In addition, the authors also pointed out that in spite of achieving some bigger progresses in experimental studies, most of the results basically reflect static, isolated and regional changes rather than dynamic and whole body changes. For this reason, more vivo research techniques and noninvasive research methods are highly recommended to be used in the future research on the underlying mechanisms of acupuncture therapy for acute cerebral ischemia.

Electro-optic and holographic measurement techniques for the atmospheric sciences. [considering spacecraft simulation applications

NASA Technical Reports Server (NTRS)

Moore, W. W., Jr.; Lemons, J. F.; Kurtz, R. L.; Liu, H.-K.

1977-01-01

A comprehensive examination is made of recent advanced research directions in the applications of electro-optical and holographic instrumentations and methods to atmospheric sciences problems. In addition, an overview is given of the in-house research program for environmental and atmospheric measurements with emphasis on particulates systems. Special treatment is made of the instrument methods and applications work in the areas of laser scattering spectrometers and pulsed holography sizing systems. Selected engineering tests data on space simulation chamber programs are discussed.

NASA/ORNL/AFRL Project Work on EBM LSHR: Additive Manufacturing of High-Temperature Gamma-Prime Strengthened Ni-Based Superalloys

NASA Technical Reports Server (NTRS)

Sudbrack, Chantal K.; Kirka, Michael M.; Dehoff, Ryan R.; Carter, Robert W.; Semiatin, Sheldon L.; Gabb, Timothy P.

2016-01-01

Powder-bed fabrication of aerospace alloys may revolutionize production by eliminating the need for extensive machining and expensive tooling. Heated-bed electron-beam melting (EBM) offers advantages over non-heated laser additive manufacturing (AM) methods, including lower residual stress, reduced risk of contamination, slower cooling rates, and faster build times. NASA Glenn Research Center has joint project work with Oak Ridge National Lab and the Air Force Research Laboratory to explore the feasibility of fabricating advanced Ni-based gamma-prime superalloys with EBM AM.

An initial investigation into methods of computing transonic aerodynamic sensitivity coefficients

NASA Technical Reports Server (NTRS)

Carlson, Leland A.

1992-01-01

Research conducted during the period from July 1991 through December 1992 is covered. A method based upon the quasi-analytical approach was developed for computing the aerodynamic sensitivity coefficients of three dimensional wings in transonic and subsonic flow. In addition, the method computes for comparison purposes the aerodynamic sensitivity coefficients using the finite difference approach. The accuracy and validity of the methods are currently under investigation.

Comparison between results of solution of Burgers' equation and Laplace's equation by Galerkin and least-square finite element methods

NASA Astrophysics Data System (ADS)

Adib, Arash; Poorveis, Davood; Mehraban, Farid

2018-03-01

In this research, two equations are considered as examples of hyperbolic and elliptic equations. In addition, two finite element methods are applied for solving of these equations. The purpose of this research is the selection of suitable method for solving each of two equations. Burgers' equation is a hyperbolic equation. This equation is a pure advection (without diffusion) equation. This equation is one-dimensional and unsteady. A sudden shock wave is introduced to the model. This wave moves without deformation. In addition, Laplace's equation is an elliptical equation. This equation is steady and two-dimensional. The solution of Laplace's equation in an earth dam is considered. By solution of Laplace's equation, head pressure and the value of seepage in the directions X and Y are calculated in different points of earth dam. At the end, water table is shown in the earth dam. For Burgers' equation, least-square method can show movement of wave with oscillation but Galerkin method can not show it correctly (the best method for solving of the Burgers' equation is discrete space by least-square finite element method and discrete time by forward difference.). For Laplace's equation, Galerkin and least square methods can show water table correctly in earth dam.

Rowing Sport in Learning Fractions of the Fourth Grade Students

ERIC Educational Resources Information Center

Nasution, Marhamah Fajriyah; Putri, Ratu Ilma Indra; Zulkardi

2018-01-01

This study aimed to produce learning trajectory with rowing context that can help students understand addition and subtraction of fractions. Subject of the research were students IV MIN 2 Palembang. The method used was research design with three stages, those are preparing for the experiment, the design experiments, and the retrospective analysis.…

The Implications of Feyerabend's Epistemological Approach for Educational Research Methods

ERIC Educational Resources Information Center

Ghadikolaei, Elham Shirvani; Sajjadi, Seyed Mahdi

2015-01-01

Epistemology is defined as theory of knowledge and the ways of achieving it. Epistemology is research questions of the possibility of knowledge and the riddle of knowledge. Epistemology and methodology despite being interconnected are inseparable and are not reducible from each other. In addition, their relationship is direct, meaning that…

Frogs Sell Beer: The Effects of Beer Advertisements on Adolescent Drinking Knowledge, Attitudes, and Behavior.

ERIC Educational Resources Information Center

Gentile, Douglas A.; Walsh, David A.; Bloomgren, Barry W., Jr.; Atti, Jule A.; Norman, Jessica A.

This present research reveals how beer advertising affects adolescents' knowledge of beer brands, drinking attitudes, and drinking behaviors. In addition to traditional psychological approaches for measuring media effects on alcohol-related behaviors and attitudes, market research advertising tracking methods were included to permit a clearer and…

40 CFR Appendix W to Part 51 - Guideline on Air Quality Models

Code of Federal Regulations, 2013 CFR

2013-07-01

... in the Guideline. The third activity is the extensive on-going research efforts by EPA and others in... addition, findings from ongoing research programs, new model development, or results from model evaluations... shown that the model is not biased toward underestimates; and v. A protocol on methods and procedures to...

40 CFR Appendix W to Part 51 - Guideline on Air Quality Models

Code of Federal Regulations, 2012 CFR

2012-07-01

... in the Guideline. The third activity is the extensive on-going research efforts by EPA and others in... addition, findings from ongoing research programs, new model development, or results from model evaluations... shown that the model is not biased toward underestimates; and v. A protocol on methods and procedures to...

40 CFR Appendix W to Part 51 - Guideline on Air Quality Models

Code of Federal Regulations, 2014 CFR

2014-07-01

... in the Guideline. The third activity is the extensive on-going research efforts by EPA and others in... addition, findings from ongoing research programs, new model development, or results from model evaluations... shown that the model is not biased toward underestimates; and v. A protocol on methods and procedures to...

Investigating Visitor Profiles as a Valuable Addition to Museum Research

ERIC Educational Resources Information Center

Lewalter, Doris; Phelan, Siëlle; Geyer, Claudia; Specht, Inga; Grüninger, Rahel; Schnotz, Wolfgang

2015-01-01

There is a long tradition of museum research assessing visitors' personal background. In this article, we suggest an insightful way to enhance and intensify visitor analyses and adopt a more integrative approach. To this end, we draw attention to Latent Class Analysis (LCA), a classification method that allows us to investigate visitor profiles…

Exploring Diverse Data Sets and Developing New Theories and Ideas With Project Integration Architecture

NASA Technical Reports Server (NTRS)

Benyo, Theresa L.; Jones, William H.

2005-01-01

The development of new ideas is the essence of scientific research. This is frequently done by developing models of physical processes and comparing model predictions with results from experiments. With models becoming ever more complex and data acquisition systems becoming more powerful, the researcher is burdened with wading through data ranging in volume up to a level of many terabytes and beyond. These data often come from multiple, heterogeneous sources and usually the methods for searching through it are at or near the manual level. In addition, current documentation methods are generally limited to researchers pen-and-paper style notebooks. Researchers may want to form constraint-based queries on a body of existing knowledge that is, itself, distributed over many different machines and environments and from the results of such queries then spawn additional queries, simulations, and data analyses in order to discover new insights into the problem being investigated. Currently, researchers are restricted to working within the boundaries of tools that are inefficient at probing current and legacy data to extend the knowledge of the problem at hand and reveal innovative and efficient solutions. A framework called the Project Integration Architecture is discussed that can address these desired functionalities.

United States Department of Agriculture-Agricultural Research Service research programs on microbes for management of plant-parasitic nematodes.

PubMed

Meyer, Susan L F

2003-01-01

Restrictions on the use of conventional nematicides have increased the need for new methods of managing plant-parasitic nematodes. Consequently, nematode-antagonistic microbes, and active compounds produced by such organisms, are being explored as potential additions to management practices. Programs in this area at the USDA Agricultural Research Service investigate applied biocontrol agents, naturally occurring beneficial soil microbes and natural compounds. Specific research topics include use of plant growth-promoting rhizobacteria and cultural practices for management of root-knot and ring nematodes, determination of management strategies that enhance activity of naturally occurring Pasteuria species (bacterial obligate parasites of nematodes), studies on interactions between biocontrol bacteria and bacterial-feeding nematodes, and screening of microbes for compounds active against plant-parasitic nematodes. Some studies involve biocontrol agents that are active against nematodes and soil-borne plant-pathogenic fungi, or combinations of beneficial bacteria and fungi, to manage a spectrum of plant diseases or to increase efficacy over a broader range of environmental conditions. Effective methods or agents identified in the research programs are investigated as additions to existing management systems for plant-parasitic nematodes.

48 CFR 2915.605 - Content of unsolicited proposals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Unsolicited Proposals 2915.605 Content of unsolicited proposals. In addition to the contents required by FAR 15.605, unsolicited proposals for research...

Update on the Health Services Research Doctoral Core Competencies.

PubMed

Burgess, James F; Menachemi, Nir; Maciejewski, Matthew L

2018-03-13

To present revised core competencies for doctoral programs in health services research (HSR), modalities to deliver these competencies, and suggested methods for assessing mastery of these competencies. Core competencies were originally developed in 2005, updated (but unpublished) in 2008, modestly updated for a 2016 HSR workforce conference, and revised based on feedback from attendees. Additional feedback was obtained from doctoral program directors, employer/workforce experts and attendees of presentation on these competencies at the AcademyHealth's June 2017 Annual Research Meeting. The current version (V2.1) competencies include the ethical conduct of research, conceptual models, development of research questions, study designs, data measurement and collection methods, statistical methods for analyzing data, professional collaboration, and knowledge dissemination. These competencies represent a core that defines what HSR researchers should master in order to address the complexities of microsystem to macro-system research that HSR entails. There are opportunities to conduct formal evaluation of newer delivery modalities (e.g., flipped classrooms) and to integrate new Learning Health System Researcher Core Competencies, developed by AHRQ, into the HSR core competencies. Core competencies in HSR are a continually evolving work in progress because new research questions arise, new methods are developed, and the trans-disciplinary nature of the field leads to new multidisciplinary and team building needs. © Health Research and Educational Trust.

Is verbatim transcription of interview data always necessary?

PubMed

Halcomb, Elizabeth J; Davidson, Patricia M

2006-02-01

Verbatim transcription of interview data has become a common data management strategy in nursing research and is widely considered to be integral to the analysis and interpretation of verbal data. As the benefits of verbal data are becoming more widely embraced in health care research, interviews are being increasingly used to collect information for a wide range of purposes. In addition to purely qualitative investigations, there has been a significant increase in the conduct of mixed-method inquiries. This article examines the issues surrounding the conduct of interviews in mixed-method research, with particular emphasis on the transcription and data analysis phases of data management. It also debates on the necessity to transcribe all audiorecorded interview data verbatim, particularly in relation to mixed-method investigations. Finally, it provides an alternative method to verbatim transcription of managing audiorecorded interview data.

Development of a pseudo/anonymised primary care research database: Proof-of-concept study.

PubMed

MacRury, Sandra; Finlayson, Jim; Hussey-Wilson, Susan; Holden, Samantha

2016-06-01

General practice records present a comprehensive source of data that could form a variety of anonymised or pseudonymised research databases to aid identification of potential research participants regardless of location. A proof-of-concept study was undertaken to extract data from general practice systems in 15 practices across the region to form pseudo and anonymised research data sets. Two feasibility studies and a disease surveillance study compared numbers of potential study participants and accuracy of disease prevalence, respectively. There was a marked reduction in screening time and increase in numbers of potential study participants identified with the research repository compared with conventional methods. Accurate disease prevalence was established and enhanced with the addition of selective text mining. This study confirms the potential for development of national anonymised research database from general practice records in addition to improving data collection for local or national audits and epidemiological projects. © The Author(s) 2014.

Research on heating, instabilities, turbulence and RF emission from electric field dominated plasmas

NASA Astrophysics Data System (ADS)

Roth, J. R.; Alexeff, Igor

1989-07-01

This contract has supported four research programs: (1) a program of research on plasma turbulence; (2) a program of research on plasma heating by collisional magnetic pumping; (3) a research program on the Orbitron submillimeter maser; and (4) the initial phase of a program on plasma cloaking of military targets for protection against radar and directed microwave energy weapons. Progress in these areas is documented in the text of this final report and in the twenty archival publications included in the appendices to this report. In addition to the above four research areas, work was continued on plasma diagnostic development, and the development of new state-of-the-art data analysis and reduction methods, including software development for online reduction of Langmuir probe, capacitive probe, and other diagnostic information. Also being developed is the capability to analyze electrostatic potential fluctuations by the methods of nonlinear dynamics. An important part of the research program was the training of graduate and undergraduate research assistants in state-of-the-art methods in the fields of high temperature plasma physics, plasma diagnostics, communications, and related areas.

Fulfilling the law of a single independent variable and improving the result of mathematical educational research

NASA Astrophysics Data System (ADS)

Pardimin, H.; Arcana, N.

2018-01-01

Many types of research in the field of mathematics education apply the Quasi-Experimental method and statistical analysis use t-test. Quasi-experiment has a weakness that is difficult to fulfil “the law of a single independent variable”. T-test also has a weakness that is a generalization of the conclusions obtained is less powerful. This research aimed to find ways to reduce the weaknesses of the Quasi-experimental method and improved the generalization of the research results. The method applied in the research was a non-interactive qualitative method, and the type was concept analysis. Concepts analysed are the concept of statistics, research methods of education, and research reports. The result represented a way to overcome the weaknesses of quasi-Experiments and T-test. In addition, the way was to apply a combination of Factorial Design and Balanced Design, which the authors refer to as Factorial-Balanced Design. The advantages of this design are: (1) almost fulfilling “the low of single independent variable” so no need to test the similarity of the academic ability, (2) the sample size of the experimental group and the control group became larger and equal; so it becomes robust to deal with violations of the assumptions of the ANOVA test.

Prediction of forces and moments for hypersonic flight vehicle control effectors

NASA Technical Reports Server (NTRS)

Maughmer, Mark D.; Long, Lyle N.; Pagano, Peter J.

1991-01-01

Developing methods of predicting flight control forces and moments for hypersonic vehicles, included a preliminary assessment of subsonic/supersonic panel methods and hypersonic local flow inclination methods for such predictions. While these findings clearly indicate the usefulness of such methods for conceptual design activities, deficiencies exist in some areas. Thus, a second phase of research was proposed in which a better understanding is sought for the reasons of the successes and failures of the methods considered, particularly for the cases at hypersonic Mach numbers. To obtain this additional understanding, a more careful study of the results obtained relative to the methods used was undertaken. In addition, where appropriate and necessary, a more complete modeling of the flow was performed using well proven methods of computational fluid dynamics. As a result, assessments will be made which are more quantitative than those of phase 1 regarding the uncertainty involved in the prediction of the aerodynamic derivatives. In addition, with improved understanding, it is anticipated that improvements resulting in better accuracy will be made to the simple force and moment prediction.

Meta-ethnography 25 years on: challenges and insights for synthesising a large number of qualitative studies.

PubMed

Toye, Francine; Seers, Kate; Allcock, Nick; Briggs, Michelle; Carr, Eloise; Barker, Karen

2014-06-21

Studies that systematically search for and synthesise qualitative research are becoming more evident in health care, and they can make an important contribution to patient care. Our team was funded to complete a meta-ethnography of patients' experience of chronic musculoskeletal pain. It has been 25 years since Noblit and Hare published their core text on meta-ethnography, and the current health research environment brings additional challenges to researchers aiming to synthesise qualitative research. Noblit and Hare propose seven stages of meta-ethnography which take the researcher from formulating a research idea to expressing the findings. These stages are not discrete but form part of an iterative research process. We aimed to build on the methods of Noblit and Hare and explore the challenges of including a large number of qualitative studies into a qualitative systematic review. These challenges hinge upon epistemological and practical issues to be considered alongside expectations about what determines high quality research. This paper describes our method and explores these challenges. Central to our method was the process of collaborative interpretation of concepts and the decision to exclude original material where we could not decipher a concept. We use excerpts from our research team's reflexive statements to illustrate the development of our methods.

Meta-ethnography 25 years on: challenges and insights for synthesising a large number of qualitative studies

PubMed Central

2014-01-01

Studies that systematically search for and synthesise qualitative research are becoming more evident in health care, and they can make an important contribution to patient care. Our team was funded to complete a meta-ethnography of patients’ experience of chronic musculoskeletal pain. It has been 25 years since Noblit and Hare published their core text on meta-ethnography, and the current health research environment brings additional challenges to researchers aiming to synthesise qualitative research. Noblit and Hare propose seven stages of meta-ethnography which take the researcher from formulating a research idea to expressing the findings. These stages are not discrete but form part of an iterative research process. We aimed to build on the methods of Noblit and Hare and explore the challenges of including a large number of qualitative studies into a qualitative systematic review. These challenges hinge upon epistemological and practical issues to be considered alongside expectations about what determines high quality research. This paper describes our method and explores these challenges. Central to our method was the process of collaborative interpretation of concepts and the decision to exclude original material where we could not decipher a concept. We use excerpts from our research team’s reflexive statements to illustrate the development of our methods. PMID:24951054

Photometric requirements for portable changeable message signs.

DOT National Transportation Integrated Search

2001-09-01

This project reviewed the performance of pchangeable message signs (PCMSs) and developed photometric standards to establish performance requirements. In addition, researchers developed photometric test methods and recommended them for use in evaluati...

Application of contact glow discharge electrolysis method for degradation of batik dye waste Remazol Red by the addition of Fe2+ ion

NASA Astrophysics Data System (ADS)

Saksono, Nelson; Puspita, Indah; Sukreni, Tulus

2017-03-01

Contact Glow Discharge Electrolysis (CGDE) has been shown to degrade much weight organic compounds such as dyes because the production of hydroxil radical (•OH) is excess. This research aims to degrade batik dye waste Remazol Red, using CGDE method with the addition of Fe2+ ion. The addition of iron salt compounds has proven to increase process efficiency. Dye degradation is known by measure its absorbances with Spectrophotometer UV-Vis. The result of study showed that percentage degradation was 99.92% in 20 minutes which obtained by using Na2SO4 0.01 M, with addition FeSO4 0,1 gram, applied voltage 860 volt, and 1 wolfram anode 5 mm depth.

Evidence-Based Ethics for Neurology and Psychiatry Research

PubMed Central

Kim, Scott Y. H.

2004-01-01

Summary: American bioethics, historically arising out of theology and philosophy, has been dominated by the method of normative analysis. Ethics as policy, however, requires in addition a solid evidence base. This paper discusses the background conditions that make neurotherapeutics research particularly challenging. Three key ethical issues are discussed within an evidence-based ethics framework: the ethical challenges arising from changes in the financial incentive structures for academic researchers and their institutions, the challenges of risk-benefit analysis for neurotherapeutics protocols testing innovative interventions, and the evolving issues surrounding impaired decision-making capacity and surrogate consent for research. For each of these issues, selected empirical data are reviewed, areas for further inquiry are noted, and the need for development of novel methods for bioethics policy research is discussed. PMID:15717040

Status of FAA Studies in Thermal Acoustics

NASA Astrophysics Data System (ADS)

Lively, John; Ouyang, Zhong; Brasche, Lisa; Holland, Steve; Eisenmann, David; Bantel, Tom; Hassan, Waled

2008-02-01

As with many aerospace applications, commercial jet engine components are operated in demanding environments, often at extreme temperature and stress conditions. The predominant used surface inspection method used on these components is fluorescent penetrant inspection. Research has been ongoing for a number of years on a new technology using a short burst of low frequency (˜20 KHz) ultrasound to "heat up" cracks and make them visible in the infrared range. The basic premise of the Thermal Acoustic method is to use an energy source with recent efforts using an ultrasonic horn originally intended for use in ultrasonic welding to excite the component. The energy source causes an increase in local heating, which is detectable with infrared cameras typically used in Thermographic inspection. While considerable research is underway, additional information on the sensitivity and applicability of this technique to engine components and alloys is needed prior to widespread use in the aviation industry. The purpose of this program is to provide additional data to determine applicability of this method to engine components.

Special Food and Nutrition Needs in School Nutrition Programs

ERIC Educational Resources Information Center

Molaison, Elaine Fontenot; Nettles, Mary Frances

2010-01-01

Purpose/Objectives: The purpose of this research was to determine the prevalence of special food and/or nutrition needs in school nutrition programs. In addition, researchers focused on the issues surrounding these needs and the role of the school nutrition (SN) directors and managers in meeting these needs. Methods: An expert panel was used to…

75 FR 27672 - Restrictions on Railroad Operating Employees' Use of Cellular Telephones and Other Electronic...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-18

... by any of the following methods: Federal eRulemaking Portal: Go to http://www.Regulations.gov... while driving. In addition to hosting the Summit, DOT has reviewed recent research and has decided to... conclusions with respect to the involvement of driver distraction in causing a crash. A 2008 research paper...

Preference for Popular and World Music: A Review of Literature

ERIC Educational Resources Information Center

Williams, Matthew

2017-01-01

Reviews of literature on music preference may provide music educators with a variety of research on information, techniques, and methods to implement in the music classroom. Calls to widen the types of music used in curricula seem to underscore the importance of research exploring preference using music other than, and in addition to, Western art…

Measuring the Quality of Life of University Students. Research Monograph Series. Volume 1.

ERIC Educational Resources Information Center

Roberts, Lance W.; Clifton, Rodney A.

This study sought to develop a valid set of scales in the cognitive and affective domains for measuring the quality of life of university students. In addition the study attempted to illustrate the usefulness of Thomas Piazza's procedures for constructing valid scales in educational research. Piazza's method involves a multi-step construction of…

Reflections on a Decade of Changes in Homeschooling and the Homeschooled into Higher Education

ERIC Educational Resources Information Center

Gloeckner, Gene W.; Jones, Paul

2013-01-01

This article reviews selected research on successes of homeschooled students over the past decade. The article raises several methods issues, especially related to sampling issues and recent changes in some state laws. In addition the article reviews research collected from college admission's officers' on their perceptions and attitudes relate to…

Is There a Consensus on Consensus Methodology? Descriptions and Recommendations for Future Consensus Research.

PubMed

Waggoner, Jane; Carline, Jan D; Durning, Steven J

2016-05-01

The authors of this article reviewed the methodology of three common consensus methods: nominal group process, consensus development panels, and the Delphi technique. The authors set out to determine how a majority of researchers are conducting these studies, how they are analyzing results, and subsequently the manner in which they are reporting their findings. The authors conclude with a set of guidelines and suggestions designed to aid researchers who choose to use the consensus methodology in their work.Overall, researchers need to describe their inclusion criteria. In addition to this, on the basis of the current literature the authors found that a panel size of 5 to 11 members was most beneficial across all consensus methods described. Lastly, the authors agreed that the statistical analyses done in consensus method studies should be as rigorous as possible and that the predetermined definition of consensus must be included in the ultimate manuscript. More specific recommendations are given for each of the three consensus methods described in the article.

A Stability Enhancement Method for Centrifugal Compressors using Active Control Casing Treatment System

NASA Astrophysics Data System (ADS)

Zhao, Yuanyang; Xiao, Jun; Li, Liansheng; Yang, Qichao; Liu, Guangbin; Wang, Le

2015-08-01

The centrifugal compressors are widely used in many fields. When the centrifugal compressors operate at the edge of the surge line, the compressor will be unstable. In addition, if the centrifugal compressor runs at this situation long time, the damage will be occurred on compressor. There are some kinds of method to improve and enlarge the range of the centrifugal compressors, such as inlet guide vane, and casing treatment. For casing treatment method, some structures have been researched, such as holed recirculation, basic slot casing treatment and groove casing treatment. All these researches are the passive methods. This paper present a new stability enhancement method based Active Control Casing Treatment (ACCT). All parts of this new method are introduced in detail. The control strategy of the system is mentioned in the paper. As a research sample, a centrifugal compressor having this system is researched using CFD method. The study focuses on the effect of the active control system on the impeller flow. The vortex in impeller is changed by the active control system. And this leads to the suppression of the extension of vortex blockage in impeller and to contribute to the enhancement of the compressor operating range.

A research agenda on patient safety in primary care. Recommendations by the LINNEAUS collaboration on patient safety in primary care

PubMed Central

Verstappen, Wim; Gaal, Sander; Bowie, Paul; Parker, Diane; Lainer, Miriam; Valderas, Jose M.; Wensing, Michel; Esmail, Aneez

2015-01-01

ABSTRACT Background: Healthcare can cause avoidable serious harm to patients. Primary care is not an exception, and the relative lack of research in this area lends urgency to a better understanding of patient safety, the future research agenda and the development of primary care oriented safety programmes. Objective: To outline a research agenda for patient safety improvement in primary care in Europe and beyond. Methods: The LINNEAUS collaboration partners analysed existing research on epidemiology and classification of errors, diagnostic and medication errors, safety culture, and learning for and improving patient safety. We discussed ideas for future research in several meetings, workshops and congresses with LINNEAUS collaboration partners, practising GPs, researchers in this field, and policy makers. Results: This paper summarizes and integrates the outcomes of the LINNEAUS collaboration on patient safety in primary care. It proposes a research agenda on improvement strategies for patient safety in primary care. In addition, it provides background information to help to connect research in this field with practicing GPs and other healthcare workers in primary care. Conclusion: Future research studies should target specific primary care domains, using prospective methods and innovative methods such as patient involvement. PMID:26339841

The internet as psychological laboratory.

PubMed

Skitka, Linda J; Sargis, Edward G

2006-01-01

This chapter reviews studies published in American Psychological Association (APA) journals from 2003-2004 and additional studies (received in response to listserv requests) that used the Internet to collect data (N=121 total studies). Specific examples of three kinds of Web-based research are reviewed: (a) translational (established methods and research questions are adapted to the Web), (b) phenomenological (behavior on the Web is the focus of study), and (c) novel (methodologically innovations unique to Web-based research). Among other findings, our review indicated that 21% of APA journals published at least one article that reported on Web-based research, most Web-based psychological research uses experimental methods, a surprising number use college student samples, and deception in Web-based research is not uncommon. Strengths and weaknesses of Web-based psychological research in general, and our sample of studies in particular, are reviewed with special attention to possible concerns about sampling and the use of deception.

Advanced Methods for Aircraft Engine Thrust and Noise Benefits: Nozzle-Inlet Flow Analysis

NASA Technical Reports Server (NTRS)

Morgan, Morris H.; Gilinsky, Mikhail M.

2001-01-01

Three connected sub-projects were conducted under reported project. Partially, these sub-projects are directed to solving the problems conducted by the HU/FM&AL under two other NASA grants. The fundamental idea uniting these projects is to use untraditional 3D corrugated nozzle designs and additional methods for exhaust jet noise reduction without essential thrust lost and even with thrust augmentation. Such additional approaches are: (1) to add some solid, fluid, or gas mass at discrete locations to the main supersonic gas stream to minimize the negative influence of strong shock waves forming in propulsion systems; this mass addition may be accompanied by heat addition to the main stream as a result of the fuel combustion or by cooling of this stream as a result of the liquid mass evaporation and boiling; (2) to use porous or permeable nozzles and additional shells at the nozzle exit for preliminary cooling of exhaust hot jet and pressure compensation for non-design conditions (so-called continuous ejector with small mass flow rate; and (3) to propose and analyze new effective methods fuel injection into flow stream in air-breathing engines. Note that all these problems were formulated based on detailed descriptions of the main experimental facts observed at NASA Glenn Research Center. Basically, the HU/FM&AL Team has been involved in joint research with the purpose of finding theoretical explanations for experimental facts and the creation of the accurate numerical simulation technique and prediction theory for solutions for current problems in propulsion systems solved by NASA and Navy agencies. The research is focused on a wide regime of problems in the propulsion field as well as in experimental testing and theoretical and numerical simulation analysis for advanced aircraft and rocket engines. The F&AL Team uses analytical methods, numerical simulations, and possible experimental tests at the Hampton University campus. We will present some management activity and theoretical numerical simulation results obtained by the FM&AL Team in the reporting period in accordance with the schedule of the work.

The anesthesia and brain monitor (ABM). Concept and performance.

PubMed

Kay, B

1984-01-01

Three integral components of the ABM, the frontalis electromyogram (EMG), the processed unipolar electroencephalogram (EEG) and the neuromuscular transmission monitor (NMT) were compared with standard research methods, and their clinical utility indicated. The EMG was compared with the method of Dundee et al (2) for measuring the induction dose of thiopentone; the EEG was compared with the SLE Galileo E8-b and the NMT was compared with the Medelec MS6. In each case correlation of results was extremely high, and the ABM offered some advantages over the standard research methods. We conclude that each of the integral units of the ABM is simple to apply and interpret, yet as accurate as standard apparatus used for research. In addition the ABM offers excellent display and recording facilities and alarm systems.

Methods of feminist family therapy supervision.

PubMed

Prouty, A M; Thomas, V; Johnson, S; Long, J K

2001-01-01

Although feminist family therapy has been studied and practiced for more than 20 years, writing about feminist supervision in family therapy has been limited. Three supervision methods emerged from a qualitative study of the experiences of feminist family therapy supervisors and the therapists they supervised: The supervision contract, collaborative methods, and hierarchical methods. In addition to a description of the participants' experiences of these methods, we discuss their fit with previous theoretical descriptions of feminist supervision and offer suggestions for future research.

Computational Nanophotonics: modeling optical interactions and transport in tailored nanosystem architectures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schatz, George; Ratner, Mark

2014-02-27

This report describes research by George Schatz and Mark Ratner that was done over the period 10/03-5/09 at Northwestern University. This research project was part of a larger research project with the same title led by Stephen Gray at Argonne. A significant amount of our work involved collaborations with Gray, and there were many joint publications as summarized later. In addition, a lot of this work involved collaborations with experimental groups at Northwestern, Argonne, and elsewhere. The research was primarily concerned with developing theory and computational methods that can be used to describe the interaction of light with noble metalmore » nanoparticles (especially silver) that are capable of plasmon excitation. Classical electrodynamics provides a powerful approach for performing these studies, so much of this research project involved the development of methods for solving Maxwell’s equations, including both linear and nonlinear effects, and examining a wide range of nanostructures, including particles, particle arrays, metal films, films with holes, and combinations of metal nanostructures with polymers and other dielectrics. In addition, our work broke new ground in the development of quantum mechanical methods to describe plasmonic effects based on the use of time dependent density functional theory, and we developed new theory concerned with the coupling of plasmons to electrical transport in molecular wire structures. Applications of our technology were aimed at the development of plasmonic devices as components of optoelectronic circuits, plasmons for spectroscopy applications, and plasmons for energy-related applications.« less

Usability evaluation of a medication reconciliation tool: Embedding safety probes to assess users' detection of medication discrepancies.

PubMed

Russ, Alissa L; Jahn, Michelle A; Patel, Himalaya; Porter, Brian W; Nguyen, Khoa A; Zillich, Alan J; Linsky, Amy; Simon, Steven R

2018-06-01

An electronic medication reconciliation tool was previously developed by another research team to aid provider-patient communication for medication reconciliation. To evaluate the usability of this tool, we integrated artificial safety probes into standard usability methods. The objective of this article is to describe this method of using safety probes, which enabled us to evaluate how well the tool supports users' detection of medication discrepancies. We completed a mixed-method usability evaluation in a simulated setting with 30 participants: 20 healthcare professionals (HCPs) and 10 patients. We used factual scenarios but embedded three artificial safety probes: (1) a missing medication (i.e., omission); (2) an extraneous medication (i.e., commission); and (3) an inaccurate dose (i.e., dose discrepancy). We measured users' detection of each probe to estimate the probability that a HCP or patient would detect these discrepancies. Additionally, we recorded participants' detection of naturally occurring discrepancies. Each safety probe was detected by ≤50% of HCPs. Patients' detection rates were generally higher. Estimates indicate that a HCP and patient, together, would detect 44.8% of these medication discrepancies. Additionally, HCPs and patients detected 25 and 45 naturally-occurring discrepancies, respectively. Overall, detection of medication discrepancies was low. Findings indicate that more advanced interface designs are warranted. Future research is needed on how technologies can be designed to better aid HCPs' and patients' detection of medication discrepancies. This is one of the first studies to evaluate the usability of a collaborative medication reconciliation tool and assess HCPs' and patients' detection of medication discrepancies. Results demonstrate that embedded safety probes can enhance standard usability methods by measuring additional, clinically-focused usability outcomes. The novel safety probes we used may serve as an initial, standard set for future medication reconciliation research. More prevalent use of safety probes could strengthen usability research for a variety of health information technologies. Published by Elsevier Inc.

Numerical Simulation of One-and Two-Phase Flows in Propulsion Systems

NASA Technical Reports Server (NTRS)

Blankson, Isaiah M. (Technical Monitor); Gilinsky, Mikhail

2002-01-01

In this report, we present some results of problems investigated during joint research between the Hampton University Fluid Mechanics and Acoustics Laboratory (FM&AL), NASA Glenn Research Center (GRC) and the Hyper-X Program of the NASA Langley Research Center (LaRC). The main areas of current scientific interest of the FM&AL include an investigation of the proposed and patented advanced methods for aircraft engine thrust and noise benefits. These methods are based on nontraditional 3D corrugated and composite nozzle, inlet, propeller and screw designs such as the Bluebell and Telescope nozzles, Mobius-shaped screws, etc. These are the main subject of our other projects, of which one is the NASA MURED's FAR Award. Working jointly with this project team, our team also analyzes additional methods for exhaust jet noise reduction. These methods are without essential thrust loss and even with thrust augmentation.

Pharmacy students' anxiety towards research during their undergraduate degree; How to reduce it?

PubMed Central

Tam, Ai May; Chaw, Siew Ling; Ang, May Jing; Yong, Mei Wan

2017-01-01

Objective To measure pharmacy students' anxiety towards research and how academic support, academic effort, attitude and self-efficacy influence their research anxiety. Methods A cross-sectional study was conducted with undergraduate final year students of pharmacy using a convenient sampling method. A validated self-administered questionnaire was used. Results Response rate for this study was 85.9% (128 students from a population of 149). The participants agreed that they read literature to understand research, but did not attend research-related coursework. Most participants (91.4%) felt that they were under stress while doing research. Almost all participants (97.6%) felt that they were doing very badly during their data analysis or they may fail their research projects. The majority of participants agreed that help from the lecturers' and friends in research give emotional support for their research activities. Conclusion Academic support for pharmacy students, along with their additional academic effort will improve the students' self-efficacy and reduce research anxiety. PMID:28419167

The influence of inquiry learning model on additives theme with ethnoscience content to cultural awareness of students

NASA Astrophysics Data System (ADS)

Sudarmin, S.; Selia, E.; Taufiq, M.

2018-03-01

The purpose of this research is to determine the influence of inquiry learning model on additives theme with ethnoscience content to cultural awareness of students and how the students’ responses to learning. The method applied in this research is a quasi-experimental with non-equivalent control group design. The sampling technique applied in this research is the technique of random sampling. The samples were eight grade students of one of junior high schools in Semarang. The results of this research were (1) thestudents’ cultural awareness of the experiment class is better than the control class (2) inquiry learning model with ethnoscience content strongly influencing the cultural awareness of students by 78% and (3) students gave positive responses to inquiry learning model with ethnoscience content. The conclusions of this research are inquiry-learning model with ethnoscience content has positive influence on students’ cultural awareness.

Searching for rigour in the reporting of mixed methods population health research: a methodological review.

PubMed

Brown, K M; Elliott, S J; Leatherdale, S T; Robertson-Wilson, J

2015-12-01

The environments in which population health interventions occur shape both their implementation and outcomes. Hence, when evaluating these interventions, we must explore both intervention content and context. Mixed methods (integrating quantitative and qualitative methods) provide this opportunity. However, although criteria exist for establishing rigour in quantitative and qualitative research, there is poor consensus regarding rigour in mixed methods. Using the empirical example of school-based obesity interventions, this methodological review examined how mixed methods have been used and reported, and how rigour has been addressed. Twenty-three peer-reviewed mixed methods studies were identified through a systematic search of five databases and appraised using the guidelines for Good Reporting of a Mixed Methods Study. In general, more detailed description of data collection and analysis, integration, inferences and justifying the use of mixed methods is needed. Additionally, improved reporting of methodological rigour is required. This review calls for increased discussion of practical techniques for establishing rigour in mixed methods research, beyond those for quantitative and qualitative criteria individually. A guide for reporting mixed methods research in population health should be developed to improve the reporting quality of mixed methods studies. Through improved reporting, mixed methods can provide strong evidence to inform policy and practice. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Estimating interaction on an additive scale between continuous determinants in a logistic regression model.

PubMed

Knol, Mirjam J; van der Tweel, Ingeborg; Grobbee, Diederick E; Numans, Mattijs E; Geerlings, Mirjam I

2007-10-01

To determine the presence of interaction in epidemiologic research, typically a product term is added to the regression model. In linear regression, the regression coefficient of the product term reflects interaction as departure from additivity. However, in logistic regression it refers to interaction as departure from multiplicativity. Rothman has argued that interaction estimated as departure from additivity better reflects biologic interaction. So far, literature on estimating interaction on an additive scale using logistic regression only focused on dichotomous determinants. The objective of the present study was to provide the methods to estimate interaction between continuous determinants and to illustrate these methods with a clinical example. and results From the existing literature we derived the formulas to quantify interaction as departure from additivity between one continuous and one dichotomous determinant and between two continuous determinants using logistic regression. Bootstrapping was used to calculate the corresponding confidence intervals. To illustrate the theory with an empirical example, data from the Utrecht Health Project were used, with age and body mass index as risk factors for elevated diastolic blood pressure. The methods and formulas presented in this article are intended to assist epidemiologists to calculate interaction on an additive scale between two variables on a certain outcome. The proposed methods are included in a spreadsheet which is freely available at: http://www.juliuscenter.nl/additive-interaction.xls.

Issues Using the Life History Calendar in Disability Research

PubMed Central

Scott, Tiffany N.; Harrison, Tracie

2011-01-01

Background Overall, there is a dearth of research reporting mixed-method data collection procedures using the LHC within disability research. Objective This report provides practical knowledge on use of the life history calendar (LHC) from the perspective of a mixed-method life history study of mobility impairment situated within a qualitative paradigm. Methods In this paper the method related literature referring to the LHC was reviewed along with its epistemological underpinnings. Further, the uses of the LHC in disability research were illustrated using preliminary data from reports of disablement in Mexican American and Non-Hispanic White women with permanent mobility impairment. Results From our perspective, the LHC was most useful when approached from an interpretive paradigm when gathering data from women of varied ethnic and socioeconomic strata. While we found the LHC the most useful tool currently available for studying disablement over the life course, there were challenges associated with its use. The LHC required extensive interviewer training. In addition, large segments of time were needed for completion depending on the type of participant responses. Conclusions Researchers planning to conduct a disability study may find our experience using the LHC valuable for anticipating issues that may arise when the LHC is used in mixed-method research. PMID:22014674

Qualitative research within trials: developing a standard operating procedure for a clinical trials unit

PubMed Central

2013-01-01

Background Qualitative research methods are increasingly used within clinical trials to address broader research questions than can be addressed by quantitative methods alone. These methods enable health professionals, service users, and other stakeholders to contribute their views and experiences to evaluation of healthcare treatments, interventions, or policies, and influence the design of trials. Qualitative data often contribute information that is better able to reform policy or influence design. Methods Health services researchers, including trialists, clinicians, and qualitative researchers, worked collaboratively to develop a comprehensive portfolio of standard operating procedures (SOPs) for the West Wales Organisation for Rigorous Trials in Health (WWORTH), a clinical trials unit (CTU) at Swansea University, which has recently achieved registration with the UK Clinical Research Collaboration (UKCRC). Although the UKCRC requires a total of 25 SOPs from registered CTUs, WWORTH chose to add an additional qualitative-methods SOP (QM-SOP). Results The qualitative methods SOP (QM-SOP) defines good practice in designing and implementing qualitative components of trials, while allowing flexibility of approach and method. Its basic principles are that: qualitative researchers should be contributors from the start of trials with qualitative potential; the qualitative component should have clear aims; and the main study publication should report on the qualitative component. Conclusions We recommend that CTUs consider developing a QM-SOP to enhance the conduct of quantitative trials by adding qualitative data and analysis. We judge that this improves the value of quantitative trials, and contributes to the future development of multi-method trials. PMID:23433341

Effects of an E-Learning Module on Students' Attitudes in an Electronics Class

ERIC Educational Resources Information Center

Getuno, Daniel M.; Kiboss, Joel K.; Changeiywo, Johnson M.; Ogola, Leo B.

2015-01-01

Research has shown that students exhibit negative attitudes towards Electronics especially when they are taught using the conventional method. This is in addition to poor instructional methods that do not promote individualization of instruction or make learning interesting. The purpose of this study was to design an e-learning module in…

77 FR 56138 - World Trade Center Health Program; Addition of Certain Types of Cancer to the List of WTC-Related...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

... of Rulemaking on Federal Agencies IV. Methods Used by the Administrator To Determine Whether To Add... [ssquf] Rare cancers The Administrator developed a hierarchy of methods (detailed in Section IV of this... treating 9/11- exposed patients; health and research organizations; the WTC Health Program Survivors...

Performance of Adhesive and Cementitious Anchoring Systems

DOT National Transportation Integrated Search

2017-08-01

This research project evaluated the behavior of adhesive and cementitious bonded anchoring systems per the approach found in the provisional standard AASHTO TP-84, in order to provide recommendations pertaining to the test method. Additional paramete...

Choosing phenomenology as a guiding philosophy for nursing research.

PubMed

Matua, Gerald Amandu

2015-03-01

To provide an overview of important methodological considerations that nurse researchers need to adhere to when choosing phenomenology as a guiding philosophy and research method. Phenomenology is a major philosophy and research method in the humanities, human sciences and arts disciplines with a central goal of describing people's experiences. However, many nurse researchers continue to grapple with methodological issues related to their choice of phenomenological method. The author conducted online and manual searches of relevant research books and electronic databases. Using an integrative method, peer-reviewed research and discussion papers published between January 1990 and December 2011 and listed in the CINAHL, Science Direct, PubMed and Google Scholar databases were reviewed. In addition, textbooks that addressed research methodologies such as phenomenology were used. Although phenomenology is widely used today to broaden understanding of human phenomena relevant to nursing practice, nurse researchers often fail to adhere to acceptable scientific and phenomenological standards. Cognisant of these challenges, researchers are expected to indicate in their work the focus of their investigations, designs, and approaches to collecting and analysing data. They are also expected to present their findings in an evocative and expressive manner. Choosing phenomenology requires researchers to understand it as a philosophy, including basic assumptions and tenets of phenomenology as a research method. This awareness enables researchers, especially novices, to make important methodological decisions, particularly those necessary to indicate the study's scientific rigour and phenomenological validity. This paper adds to the discussion of phenomenology as a guiding philosophy for nursing research. It aims to guide new researchers on important methodological decisions they need to make to safeguard their study's scientific rigour and phenomenological validity.

Using Colaizzi's method of data analysis to explore the experiences of nurse academics teaching on satellite campuses.

PubMed

Wirihana, Lisa; Welch, Anthony; Williamson, Moira; Christensen, Martin; Bakon, Shannon; Craft, Judy

2018-03-16

Phenomenology is a useful methodological approach in qualitative nursing research. It enables researchers to put aside their perceptions of a phenomenon and give meaning to a participant's experiences. Exploring the experiences of others enables previously unavailable insights to be discovered. To delineate the implementation of Colaizzi's ( 1978 ) method of data analysis in descriptive phenomenological nursing research. The use of Colaizzi's method of data analysis enabled new knowledge to be revealed and provided insights into the experiences of nurse academics teaching on satellite campuses. Local adaptation of the nursing curriculum and additional unnoticed responsibilities had not been identified previously and warrant further research. Colaizzi's ( 1978 ) method of data analysis is rigorous and robust, and therefore a qualitative method that ensures the credibility and reliability of its results. It allows researchers to reveal emergent themes and their interwoven relationships. Researchers using a descriptive phenomenological approach should consider using this method as a clear and logical process through which the fundamental structure of an experience can be explored. Colaizzi's phenomenological methodology can be used reliably to understand people's experiences. This may prove beneficial in the development of therapeutic policy and the provision of patient-centred care. ©2018 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

An introduction to tree-structured modeling with application to quality of life data.

PubMed

Su, Xiaogang; Azuero, Andres; Cho, June; Kvale, Elizabeth; Meneses, Karen M; McNees, M Patrick

2011-01-01

Investigators addressing nursing research are faced increasingly with the need to analyze data that involve variables of mixed types and are characterized by complex nonlinearity and interactions. Tree-based methods, also called recursive partitioning, are gaining popularity in various fields. In addition to efficiency and flexibility in handling multifaceted data, tree-based methods offer ease of interpretation. The aims of this study were to introduce tree-based methods, discuss their advantages and pitfalls in application, and describe their potential use in nursing research. In this article, (a) an introduction to tree-structured methods is presented, (b) the technique is illustrated via quality of life (QOL) data collected in the Breast Cancer Education Intervention study, and (c) implications for their potential use in nursing research are discussed. As illustrated by the QOL analysis example, tree methods generate interesting and easily understood findings that cannot be uncovered via traditional linear regression analysis. The expanding breadth and complexity of nursing research may entail the use of new tools to improve efficiency and gain new insights. In certain situations, tree-based methods offer an attractive approach that help address such needs.

Effects of an Inverted Instructional Delivery Model on Achievement of Ninth-Grade Physical Science Honors Students

ERIC Educational Resources Information Center

Howell, Donna

2013-01-01

This mixed-methods action research study was designed to assess the achievement of ninth-grade Physical Science Honors students by analysis of pre and posttest data. In addition, perceptual data from students, parents, and the researcher were collected to form a complete picture of the flipped lecture format versus the traditional lecture format.…

Applied Linguistics Project: Student-Led Computer Assisted Research in High School EAL/EAP

ERIC Educational Resources Information Center

Bohát, Róbert; Rödlingová, Beata; Horáková, Nina

2015-01-01

The Applied Linguistics Project (ALP) started at the International School of Prague (ISP) in 2013. Every year, Grade 9 English as an Additional Language (EAL) students identify an area of learning in need of improvement and design a research method followed by data collection and analysis using basic computer software tools or online corpora.…

Exploring the Effectiveness of Picture Books for Teaching Young Children the Concepts of Environmental Protection

ERIC Educational Resources Information Center

Hsiao, Ching-Yuan; Shih, Pei-Yu

2016-01-01

This research aimed to investigate the use of picture books by preschool teachers to instruct environmental concepts and their influence on resource saving by children. The study adopted qualitative research as a method to investigate 11 children aged 5-6 years in Taiwan. In addition, we used "the environmental protector" as a main…

An Example of Prepared-Planned Creative Drama in Second Grade Mathematics Education

ERIC Educational Resources Information Center

Özsoy, Nesrin; Özyer, Sinan; Akdeniz, Nesibe; Alkoç, Aysenur

2017-01-01

The aim of this research is teaching addition with natural numbers and the concept of large and small natural numbers in the second grade mathematics course, through creative drama method. The study has been applied to 31 elementary school second grade students studying at a public school in the province of Aydin. In this research, case study…

"Listen, Do, Repeat, Understand and Remember": Teaching English to Very Young Children in Aceh

ERIC Educational Resources Information Center

Yusuf, Qismullah; Asyik, Abdul Gani; Yusuf, Yunisrina Qismullah; Rusdi, Lathifatuddini

2017-01-01

This qualitative study investigated the methods used in teaching English vocabulary to very young children (i.e. toddlers) at a bilingual school in Banda Aceh, Indonesia. Not much research has been published on teaching English to toddlers in the EFL context; therefore, this research is important as the results can become additional input to L2…

Garden Counseling Groups and Self-Esteem: A Mixed Methods Study with Children with Emotional and Behavioral Problems

ERIC Educational Resources Information Center

Swank, Jacqueline M.; Shin, Sang Min

2015-01-01

This research study focused on the use of a garden group counseling intervention to address the self-esteem of children with emotional and behavioral problems. The researchers found higher self-esteem among participants (N = 31) following the gardening group. Additionally, participants discussed feeling calm and happy and learning to working…

DNA Immunization

PubMed Central

Wang, Shixia; Lu, Shan

2013-01-01

DNA immunization was discovered in early 1990s and its use has been expanded from vaccine studies to a broader range of biomedical research, such as the generation of high quality polyclonal and monoclonal antibodies as research reagents. In this unit, three common DNA immunization methods are described: needle injection, electroporation and gene gun. In addition, several common considerations related to DNA immunization are discussed. PMID:24510291

A Comparison of Three Different Scoring Methods for Self-Report Measures of Psychological Aggression in a Sample of College Females

PubMed Central

Shorey, Ryan C.; Brasfield, Hope; Febres, Jeniimarie; Cornelius, Tara L.; Stuart, Gregory L.

2012-01-01

Psychological aggression in females’ dating relationships has received increased empirical attention in recent years. However, researchers have used numerous measures of psychological aggression, and various scoring methods with these measures, making it difficult to compare across studies on psychological aggression. In addition, research has yet to examine whether different scoring methods for psychological aggression measures may affect the psychometric properties of these instruments. The current study examined three self-report measures of psychological aggression within a sample of female college students (N = 108), including their psychometric properties when scored using frequency, sum, and variety scores. Results showed that the Revised Conflict Tactics Scales (CTS2) had variable internal consistency depending on the scoring method used and good validity; the Multidimensional Measure of Emotional Abuse (MMEA) and the Follingstad Psychological Aggression Scale (FPAS) both had good internal consistency and validity across scoring methods. Implications of these findings for the assessment of psychological aggression and future research are discussed. PMID:23393957

A comparison of three different scoring methods for self-report measures of psychological aggression in a sample of college females.

PubMed

Shorey, Ryan C; Brasfield, Hope; Febres, Jeniimarie; Cornelius, Tara L; Stuart, Gregory L

2012-01-01

Psychological aggression in females' dating relationships has received increased empirical attention in recent years. However, researchers' have used numerous measures of psychological aggression and various scoring methods with these measures, making it difficult to compare across studies on psychological aggression. In addition, research has yet to examine whether different scoring methods for psychological aggression measures may affect the psychometric properties of these instruments. This study examined three self-report measures of psychological aggression within a sample of female college students (N = 108), including their psychometric properties when scored using frequency, sum, and variety scores. Results showed that the Revised Conflict Tactics Scales (CTS2) had variable internal consistency depending on the scoring method used and good validity; the Multidimensional Measure of Emotional Abuse (MMEA) and the Follingstad Psychological Aggression Scale (FPAS) both had good internal consistency and validity across scoring methods. Implications of these findings for the assessment of psychological aggression and future research are discussed.

Surface texture measurement for additive manufacturing

NASA Astrophysics Data System (ADS)

Triantaphyllou, Andrew; Giusca, Claudiu L.; Macaulay, Gavin D.; Roerig, Felix; Hoebel, Matthias; Leach, Richard K.; Tomita, Ben; Milne, Katherine A.

2015-06-01

The surface texture of additively manufactured metallic surfaces made by powder bed methods is affected by a number of factors, including the powder’s particle size distribution, the effect of the heat source, the thickness of the printed layers, the angle of the surface relative to the horizontal build bed and the effect of any post processing/finishing. The aim of the research reported here is to understand the way these surfaces should be measured in order to characterise them. In published research to date, the surface texture is generally reported as an Ra value, measured across the lay. The appropriateness of this method for such surfaces is investigated here. A preliminary investigation was carried out on two additive manufacturing processes—selective laser melting (SLM) and electron beam melting (EBM)—focusing on the effect of build angle and post processing. The surfaces were measured using both tactile and optical methods and a range of profile and areal parameters were reported. Test coupons were manufactured at four angles relative to the horizontal plane of the powder bed using both SLM and EBM. The effect of lay—caused by the layered nature of the manufacturing process—was investigated, as was the required sample area for optical measurements. The surfaces were also measured before and after grit blasting.

The influence of supplemented Curcuma in feed formulation to improve growth rate and feed efficiency of catfish (Clarias sp.)

NASA Astrophysics Data System (ADS)

Ulum, M. M.; Zubaidah, M.; Arief, M.; Prayogo

2018-04-01

Catfish (Clarias sp.) is very potential to be developed as a food fish. The use of the feed additive in feed intended to improve the health, productivity and compliance with animal nutrition. Feed additive is to use ginger are derived from nature.The purpose of this study was to determine the potential increase in feed formulation. The Curcuma effect on growth rate and feed efficiency of catfish (Clarias sp.). The method used experimental methods and design complete random with 4 treatments and 5 replications. The parameters examined in this study aregrowth rate and efficiency feed.The research showed that the ANOVA markedly dissimilar ( P< 0.05 ) against growth rate and efficiency feed catfishes. The average is 0.275 - 0.33 growth and the results efficiency feed catfishes of 60.70 % - 73.10 % and the results obtained temperature water quality around 27-30°C, pH 7-8, and DO 3.09-6.4. Based on this research cultivator of the suggested use flour curcuma as feed additive on formulations feed.

Review on Advances of Functional Material for Additive Manufacturing

NASA Astrophysics Data System (ADS)

Zulkifli, Nur Amalina Binti; Akmal Johar, Muhammad; Faizan Marwah, Omar Mohd; Irwan Ibrahim, Mohd Halim

2017-08-01

The attempt of finding and making new materials in improving products that are already in the market are widely done by researchers nowadays. This project is focusing on making new materials for functional material through additive manufacturing application. The idea of this project came from the ability limitation of capacitor in market nowadays in storing higher charges but smaller in size. Powder glass is the new material that could to be used as a dielectric material for capacitor with the help of palm kernel oil as the binder. This paper reviews on applications done through additive manufacturing method and also types of functional materials used in this method previously. Structure of a capacitor, dielectric properties and measurement techniques that are trying to be carried out are also explains in this paper. Last part of this paper brief on the material proposal and reasons those materials are chosen. New dielectric material for capacitor which are able to store more charges but still small in size are expected to be produced as the outcome of this research.

Additives for cement compositions based on modified peat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kopanitsa, Natalya, E-mail: kopanitsa@mail.ru; Sarkisov, Yurij, E-mail: sarkisov@tsuab.ru; Gorshkova, Aleksandra, E-mail: kasatkina.alexandra@gmail.com

High quality competitive dry building mixes require modifying additives for various purposes to be included in their composition. There is insufficient amount of quality additives having stable properties for controlling the properties of cement compositions produced in Russia. Using of foreign modifying additives leads to significant increasing of the final cost of the product. The cost of imported modifiers in the composition of the dry building mixes can be up to 90% of the material cost, depending on the composition complexity. Thus, the problem of import substitution becomes relevant, especially in recent years, due to difficult economic situation. The articlemore » discusses the possibility of using local raw materials as a basis for obtaining dry building mixtures components. The properties of organo-mineral additives for cement compositions based on thermally modified peat raw materials are studied. Studies of the structure and composition of the additives are carried out by physicochemical research methods: electron microscopy and X-ray analysis. Results of experimental research showed that the peat additives contribute to improving of cement-sand mortar strength and hydrophysical properties.« less

Enhancing students’ mathematical representation and selfefficacy through situation-based learning assisted by geometer’s sketchpad program

NASA Astrophysics Data System (ADS)

Sowanto; Kusumah, Y. S.

2018-05-01

This research was conducted based on the problem of a lack of students’ mathematical representation ability as well as self-efficacy in accomplishing mathematical tasks. To overcome this problem, this research used situation-based learning (SBL) assisted by geometer’s sketchpad program (GSP). This research investigated students’ improvement of mathematical representation ability who were taught under situation-based learning (SBL) assisted by geometer’s sketchpad program (GSP) and regular method that viewed from the whole students’ prior knowledge (high, average, and low level). In addition, this research investigated the difference of students’ self-efficacy after learning was given. This research belongs to quasi experiment research using non-equivalent control group design with purposive sampling. The result of this research showed that students’ enhancement in their mathematical representation ability taught under SBL assisted by GSP was better than the regular method. Also, there was no interaction between learning methods and students prior knowledge in student’ enhancement of mathematical representation ability. There was significant difference of students’ enhancement of mathematical representation ability taught under SBL assisted by GSP viewed from students’ prior knowledge. Furthermore, there was no significant difference in terms of self-efficacy between those who were taught by SBL assisted by GSP with the regular method.

Map Changes and Theme Evolution in Work Hours: A Co-Word Analysis

PubMed Central

Liu, Bei; Chen, Hong; Huang, Xinru

2018-01-01

(1) Background: Work hours are the basic carrier impacting employees’ work–life experience and organizational performance, and employees have greater anxiety in relation to work hours as new technology requires an increasingly faster work rhythm. However, scientific research on this topic lags far behind the practice, calling to attention the need for research on work hours from the perspective of historical evolution; (2) Methods: The Bibliometric method is used to analyze the 6364 articles and their contained 77 high-frequency keywords related to work hours from the Web of Science published between 1901 and 2017. Additionally, an individual–organization–society integrative perspective was adopted to describe the map changes and theme evolution of work hours; (3) Results and conclusions: The hot spots of research at the organizational level changed significantly around 1990, with the theme of “long work hours” becoming the core issue in recent years. Studies on the individual level have gradually moved from physiological aspects to the issues of burnout and psychological distress. Research topics related to the social level are somewhat loose, and mainly focused on work–life conflict areas. In addition, the cluster analysis based on the high-frequency keywords classifies six research types according to their research themes. Based on these findings, future trends are proposed to provide theoretical and practical reference for future studies. PMID:29789455

Standardizing lightweight deflectometer modulus measurements for compaction quality assurance : research summary.

DOT National Transportation Integrated Search

2017-09-01

The mechanistic-empirical pavement design method requires the elastic resilient modulus as the key input for characterization of geomaterials. Current density-based QA procedures do not measure resilient modulus. Additionally, the density-based metho...

Field Geophysics at SAGE: Strategies for Effective Education

NASA Astrophysics Data System (ADS)

Braile, L. W.; Baldridge, W. S.; Jiracek, G. R.; Biehler, S.; Ferguson, J. F.; Pellerin, L.; McPhee, D. K.; Bedrosian, P. A.; Snelson, C. M.; Hasterok, D. P.

2011-12-01

SAGE (Summer of Applied Geophysical Experience) is a unique program of education and research in geophysical field methods for undergraduate and graduate students from any university and for professionals. The core program is held for 4 weeks each summer in New Mexico and for an additional week in the following academic year in San Diego for U.S. undergraduates supported by the NSF Research Experience for Undergraduates (REU) program. Since SAGE was initiated in 1983, 730 students have participated in the program. NSF REU funding for SAGE began in 1990 and 319 REU students have completed SAGE through 2011. The primary objectives of SAGE are to teach the major geophysical exploration methods (seismic, gravity, magnetics, electromagnetics); apply these methods to the solution of specific problems (environmental, archaeological, hydrologic, geologic structure and stratigraphy); gain experience in processing, modeling and interpretation of geophysical data; and integrate the geophysical models and interpretations with geology. Additional objectives of SAGE include conducting research on the Rio Grande rift of northern New Mexico, and providing information on geophysics careers and professional development experiences to SAGE participants. Successful education, field and research strategies that we have implemented over the years include: 1. learn by doing; 2. mix lecture/discussion, field work, data processing and analysis, modeling and interpretation, and presentation of results; 3. a two-tier team approach - method/technique oriented teams and interpretation/integration teams (where each team includes persons representing different methods), provides focus, in-depth study, opportunity for innovation, and promotes teamwork and a multi-disciplinary approach; 4. emphasis on presentations/reports - each team (and all team members) make presentation, each student completes a written report; 5. experiment design discussion - students help design field program and consider issues - safety, constraints, data quality/quantity, research objective, educational experience, survey parameters, why multidisciplinary?, etc.; 6. knowledge of multiple geophysical field methods (each student works with all methods); 7. information on geophysics careers and networking provided by industry visitors; 8. measures of success of the program include high rate of continuation to graduate school and careers in geophysics, support and feedback from industry participants and visitors, student evaluations at end of program, presentations at professional meetings, publications, and faculty evaluation of student work.

Mathematical correlation of modal-parameter-identification methods via system-realization theory

NASA Technical Reports Server (NTRS)

Juang, Jer-Nan

1987-01-01

A unified approach is introduced using system-realization theory to derive and correlate modal-parameter-identification methods for flexible structures. Several different time-domain methods are analyzed and treated. A basic mathematical foundation is presented which provides insight into the field of modal-parameter identification for comparison and evaluation. The relation among various existing methods is established and discussed. This report serves as a starting point to stimulate additional research toward the unification of the many possible approaches for modal-parameter identification.

Nonrecursive formulations of multibody dynamics and concurrent multiprocessing

NASA Technical Reports Server (NTRS)

Kurdila, Andrew J.; Menon, Ramesh

1993-01-01

Since the late 1980's, research in recursive formulations of multibody dynamics has flourished. Historically, much of this research can be traced to applications of low dimensionality in mechanism and vehicle dynamics. Indeed, there is little doubt that recursive order N methods are the method of choice for this class of systems. This approach has the advantage that a minimal number of coordinates are utilized, parallelism can be induced for certain system topologies, and the method is of order N computational cost for systems of N rigid bodies. Despite the fact that many authors have dismissed redundant coordinate formulations as being of order N(exp 3), and hence less attractive than recursive formulations, we present recent research that demonstrates that at least three distinct classes of redundant, nonrecursive multibody formulations consistently achieve order N computational cost for systems of rigid and/or flexible bodies. These formulations are as follows: (1) the preconditioned range space formulation; (2) penalty methods; and (3) augmented Lagrangian methods for nonlinear multibody dynamics. The first method can be traced to its foundation in equality constrained quadratic optimization, while the last two methods have been studied extensively in the context of coercive variational boundary value problems in computational mechanics. Until recently, however, they have not been investigated in the context of multibody simulation, and present theoretical questions unique to nonlinear dynamics. All of these nonrecursive methods have additional advantages with respect to recursive order N methods: (1) the formalisms retain the highly desirable order N computational cost; (2) the techniques are amenable to concurrent simulation strategies; (3) the approaches do not depend upon system topology to induce concurrency; and (4) the methods can be derived to balance the computational load automatically on concurrent multiprocessors. In addition to the presentation of the fundamental formulations, this paper presents new theoretical results regarding the rate of convergence of order N constraint stabilization schemes associated with the newly introduced class of methods.

Synergistic effect between nano-ceramic lubricating additives and electroless deposited Ni-W-P coating

NASA Astrophysics Data System (ADS)

Chen, Min; Cheng, Wushan; Zhao, Zuxin; Huang, Xiaobo

2013-01-01

The major solving ways for the material wear are surface modification and lubrication. Currently, the researches at home and abroad are all limited to the single study of either nano-lubricating oil additive or electroless deposited coating. The surface coating has high hardness and high wear resistance, however, the friction reduction performance of the coating with high hardness is not good, the thickness of the coating is limited, and the coating can not regenerate after wearing. The nano-lubricating additives have good tribological performance and self-repair function, but under heavy load, the self-repair rate to the worn surface with the nano-additives is smaller than the wearing rate of the friction pair. To solve the above problems, the Ni-W-P alloy coating and deposition process with excellent anti-wear, and suitable for industrial application were developed, the optimum bath composition and process can be obtained by studying the influence of the bath composition, temperature and PH value to the deposition rate and the plating solution stability. The tribological properties as well as anti-wear and friction reduction mechanism of wear self-repair nano-ceramic lubricating additives are also studied. The ring-block abrasion testing machine and energy dispersive spectrometer are used to explore the internal relation between the coating and the nano-lubricating oil additives, and the tribology mechanism, to seek the synergetic effect between the two. The test results show that the wear resistance of Ni-W-P alloy coating (with heat treatment and in oil with nano-ceramic additives) has increased hundreds times than 45 steel as the metal substrate in basic oil, the friction reduction performance is improved. This research breaks through the bottleneck of previous separate research of the above-mentioned two methods, and explores the combination use of the two methods in industrial field.

International SUSMIN-project aims at sustainable gold mining in EU

NASA Astrophysics Data System (ADS)

Backnäs, Soile; Neitola, Raisa; Turunen, Kaisa; Lima, Alexandre; Fiúza, António; Szlachta, Malgorzata; Wójtowicz, Patryk; Maftei, Raluca; Munteanu, Marian; Alakangas, Lena; Baciu, Calin; Fernández, Dámaris

2015-04-01

Although the gold demand has been constantly increasing in past years, the commodity findings have been decreasing and the extraction of gold has complicated due to increasing complexity and decreasing grade of the ores. Additionally, even gold mining could increase economical development, it has also challenges in eco-efficiency and extraction methods (e.g. cyanide). Thus, the novel energy and resource-efficient methods and technologies for mineral processing should be developed to concentrate selectively different gold bearing minerals. Furthermore, technologies for efficient treatment of mine waters, sustainable management of wastes, and methods to diminish environmental and social impacts of mining are needed. These problems will be addressed by the three year long project SUSMIN. The SUSMIN-project identifies and evaluates environmental impacts and economical challenges of gold mining within EU. The objective of the project is to increase the transnational cooperation and to support environmentally, socially and economically sustainable viable gold production. The focus is to develop and test geophysical techniques for gold exploration, eco-efficient ore beneficiation methods and alternatives for cyanide leaching. Additionally, the research will improve treatment methods for mine waters by the development and testing of advanced adsorbents. The research on socio-economic issues pursues to develop tools for enhancing the mechanisms of the corporate social responsibility as well as community engagement and management of the relations with the stakeholders. Moreover, with the environmental risk assessment and better knowledge of the geochemistry and long-term transformation of the contaminants in mining wastes and mine waters, the mining companies are able to predict and prevent the impacts to the surrounding environment, resulting in an improved environmental management solution. The SUSMIN consortium led by Geological Survey of Finland (GTK) includes seven research partners from six EU member states Finland, Sweden, Portugal, Romania, Poland and Ireland. Additionally eight globally on mining industry working industry partners will contribute in the SUSMIN consortium, so implementation of results from the project will translate into direct and significant economic benefits.

The Importance of PRI Therapy for the Pastoral Counsellor

PubMed Central

2009-01-01

It is not always easy for pastoral counsellors to help people change. Often people have become stuck in their ways. Recent developments in the field of brain research help explain why change is difficult. This article discusses Past Reality Integration Therapy (PRI), a psychotherapeutic method that integrates recent findings of brain research and offers an important addition to the work of (pastoral) counsellors and psychotherapists. The use of this approach with Dutch students in their pastoral training is presented. Furthermore the importance of this new method for counsellors themselves, their clients and their work is discussed and some overall conclusions about the method and its practical application are presented. PMID:20835380

Research on pre-processing of QR Code

NASA Astrophysics Data System (ADS)

Sun, Haixing; Xia, Haojie; Dong, Ning

2013-10-01

QR code encodes many kinds of information because of its advantages: large storage capacity, high reliability, full arrange of utter-high-speed reading, small printing size and high-efficient representation of Chinese characters, etc. In order to obtain the clearer binarization image from complex background, and improve the recognition rate of QR code, this paper researches on pre-processing methods of QR code (Quick Response Code), and shows algorithms and results of image pre-processing for QR code recognition. Improve the conventional method by changing the Souvola's adaptive text recognition method. Additionally, introduce the QR code Extraction which adapts to different image size, flexible image correction approach, and improve the efficiency and accuracy of QR code image processing.

Joint Research on Scatterometry and AFM Wafer Metrology

NASA Astrophysics Data System (ADS)

Bodermann, Bernd; Buhr, Egbert; Danzebrink, Hans-Ulrich; Bär, Markus; Scholze, Frank; Krumrey, Michael; Wurm, Matthias; Klapetek, Petr; Hansen, Poul-Erik; Korpelainen, Virpi; van Veghel, Marijn; Yacoot, Andrew; Siitonen, Samuli; El Gawhary, Omar; Burger, Sven; Saastamoinen, Toni

2011-11-01

Supported by the European Commission and EURAMET, a consortium of 10 participants from national metrology institutes, universities and companies has started a joint research project with the aim of overcoming current challenges in optical scatterometry for traceable linewidth metrology. Both experimental and modelling methods will be enhanced and different methods will be compared with each other and with specially adapted atomic force microscopy (AFM) and scanning electron microscopy (SEM) measurement systems in measurement comparisons. Additionally novel methods for sophisticated data analysis will be developed and investigated to reach significant reductions of the measurement uncertainties in critical dimension (CD) metrology. One final goal will be the realisation of a wafer based reference standard material for calibration of scatterometers.

Defining an additivity framework for mixture research in inducible whole-cell biosensors

NASA Astrophysics Data System (ADS)

Martin-Betancor, K.; Ritz, C.; Fernández-Piñas, F.; Leganés, F.; Rodea-Palomares, I.

2015-11-01

A novel additivity framework for mixture effect modelling in the context of whole cell inducible biosensors has been mathematically developed and implemented in R. The proposed method is a multivariate extension of the effective dose (EDp) concept. Specifically, the extension accounts for differential maximal effects among analytes and response inhibition beyond the maximum permissive concentrations. This allows a multivariate extension of Loewe additivity, enabling direct application in a biphasic dose-response framework. The proposed additivity definition was validated, and its applicability illustrated by studying the response of the cyanobacterial biosensor Synechococcus elongatus PCC 7942 pBG2120 to binary mixtures of Zn, Cu, Cd, Ag, Co and Hg. The novel method allowed by the first time to model complete dose-response profiles of an inducible whole cell biosensor to mixtures. In addition, the approach also allowed identification and quantification of departures from additivity (interactions) among analytes. The biosensor was found to respond in a near additive way to heavy metal mixtures except when Hg, Co and Ag were present, in which case strong interactions occurred. The method is a useful contribution for the whole cell biosensors discipline and related areas allowing to perform appropriate assessment of mixture effects in non-monotonic dose-response frameworks

Text mining a self-report back-translation.

PubMed

Blanch, Angel; Aluja, Anton

2016-06-01

There are several recommendations about the routine to undertake when back translating self-report instruments in cross-cultural research. However, text mining methods have been generally ignored within this field. This work describes a text mining innovative application useful to adapt a personality questionnaire to 12 different languages. The method is divided in 3 different stages, a descriptive analysis of the available back-translated instrument versions, a dissimilarity assessment between the source language instrument and the 12 back-translations, and an item assessment of item meaning equivalence. The suggested method contributes to improve the back-translation process of self-report instruments for cross-cultural research in 2 significant intertwined ways. First, it defines a systematic approach to the back translation issue, allowing for a more orderly and informed evaluation concerning the equivalence of different versions of the same instrument in different languages. Second, it provides more accurate instrument back-translations, which has direct implications for the reliability and validity of the instrument's test scores when used in different cultures/languages. In addition, this procedure can be extended to the back-translation of self-reports measuring psychological constructs in clinical assessment. Future research works could refine the suggested methodology and use additional available text mining tools. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

An Interactive Method for Teaching Anatomy of the Human Eye for Medical Students in Ophthalmology Clinical Rotations

ERIC Educational Resources Information Center

Kivell, Tracy L.; Doyle, Sara K.; Madden, Richard H.; Mitchell, Terry L.; Sims, Ershela L.

2009-01-01

Much research has shown the benefits of additional anatomical learning and dissection beyond the first year of medical school human gross anatomy, all the way through postgraduate medical training. We have developed an interactive method for teaching eye and orbit anatomy to medical students in their ophthalmology rotation at Duke University…

93 Years of stand density and land-use legacy research at the Coulter Ranch Study Site

Treesearch

Andrew J. Sanchez Meador; Margaret M. Moore

2008-01-01

In 1913, the Fort Valley Experimental Forest initiated an unprecedented case-study experiment to determine the effects of harvesting methods on tree regeneration and growth on a ponderosa pine-Gambel oak forest at Coulter Ranch in northern Arizona. The harvesting methods examined were seed-tree, group selection, and light selection. In addition, the effects of...

Design Optimization of Irregular Cellular Structure for Additive Manufacturing

NASA Astrophysics Data System (ADS)

Song, Guo-Hua; Jing, Shi-Kai; Zhao, Fang-Lei; Wang, Ye-Dong; Xing, Hao; Zhou, Jing-Tao

2017-09-01

Irregularcellular structurehas great potential to be considered in light-weight design field. However, the research on optimizing irregular cellular structures has not yet been reporteddue to the difficulties in their modeling technology. Based on the variable density topology optimization theory, an efficient method for optimizing the topology of irregular cellular structures fabricated through additive manufacturing processes is proposed. The proposed method utilizes tangent circles to automatically generate the main outline of irregular cellular structure. The topological layoutof each cellstructure is optimized using the relative density informationobtained from the proposed modified SIMP method. A mapping relationship between cell structure and relative densityelement is builtto determine the diameter of each cell structure. The results show that the irregular cellular structure can be optimized with the proposed method. The results of simulation and experimental test are similar for irregular cellular structure, which indicate that the maximum deformation value obtained using the modified Solid Isotropic Microstructures with Penalization (SIMP) approach is lower 5.4×10-5 mm than that using the SIMP approach under the same under the same external load. The proposed research provides the instruction to design the other irregular cellular structure.

Direct printing of micro/nanostructures by femtosecond laser excitation of nanocrystals

NASA Astrophysics Data System (ADS)

Shou, Wan; Pan, Heng

2017-02-01

Direct writing using single or multiple energized beams (e.g. laser, ion or electron beams) provides high feature resolution (<1μm) compared with other solution-based printing methods (e.g. inkjet printing). There have been extensive researches on micro/nano additive manufacturing methods employing laser (or optical) and ion/electron beams. Many of these processes utilize specially designed photosensitive materials consisting of additives and effective components. Due to the presence of additive (such as polymer and binders), the effective components are relatively low resulting in high threshold for device operation. In order to direct print functional devices at low cost, there has been extensive research on laser processing of pre-synthesized nanomaterials for non-polymer functional device manufacturing. Pre-synthesized nanocrystals can have better control in the stoichiometry and crystallinity. In addition, pre-synthesis process enjoys the flexibility in material choice since a variety of materials can be synthesized. Femtosecond laser assembly and deposition of nanomaterials can be a feasible 3D micro/nano additive manufacturing approach, although mechanisms leading to assembly and deposition have not been fully understood. In this paper, we propose a mechanism for 2D and 3D deposition of nanocrystals by laser excitation with moderate peak intensities(1011-1012 W/cm2). It is postulated that laser induced charging is responsible for the deposition. The scheme paves the way for laser selective electrophoretic deposition as a micro/nanoscale additive manufacturing approach.

The Toxic Effects of Cigarette Additives. Philip Morris' Project Mix Reconsidered: An Analysis of Documents Released through Litigation

PubMed Central

Wertz, Marcia S.; Kyriss, Thomas; Paranjape, Suman; Glantz, Stanton A.

2011-01-01

Background In 2009, the promulgation of US Food and Drug Administration (FDA) tobacco regulation focused attention on cigarette flavor additives. The tobacco industry had prepared for this eventuality by initiating a research program focusing on additive toxicity. The objective of this study was to analyze Philip Morris' Project MIX as a case study of tobacco industry scientific research being positioned strategically to prevent anticipated tobacco control regulations. Methods and Findings We analyzed previously secret tobacco industry documents to identify internal strategies for research on cigarette additives and reanalyzed tobacco industry peer-reviewed published results of this research. We focused on the key group of studies conducted by Phillip Morris in a coordinated effort known as “Project MIX.” Documents showed that Project MIX subsumed the study of various combinations of 333 cigarette additives. In addition to multiple internal reports, this work also led to four peer-reviewed publications (published in 2001). These papers concluded that there was no evidence of substantial toxicity attributable to the cigarette additives studied. Internal documents revealed post hoc changes in analytical protocols after initial statistical findings indicated an additive-associated increase in cigarette toxicity as well as increased total particulate matter (TPM) concentrations in additive-modified cigarette smoke. By expressing the data adjusted by TPM concentration, the published papers obscured this underlying toxicity and particulate increase. The animal toxicology results were based on a small number of rats in each experiment, raising the possibility that the failure to detect statistically significant changes in the end points was due to underpowering the experiments rather than lack of a real effect. Conclusion The case study of Project MIX shows tobacco industry scientific research on the use of cigarette additives cannot be taken at face value. The results demonstrate that toxins in cigarette smoke increase substantially when additives are put in cigarettes, including the level of TPM. In particular, regulatory authorities, including the FDA and similar agencies elsewhere, could use the Project MIX data to eliminate the use of these 333 additives (including menthol) from cigarettes. Please see later in the article for the Editors' Summary PMID:22205885

Application of AI methods to aircraft guidance and control

NASA Technical Reports Server (NTRS)

Hueschen, Richard M.; Mcmanus, John W.

1988-01-01

A research program for integrating artificial intelligence (AI) techniques with tools and methods used for aircraft flight control system design, development, and implementation is discussed. The application of the AI methods for the development and implementation of the logic software which operates with the control mode panel (CMP) of an aircraft is presented. The CMP is the pilot control panel for the automatic flight control system of a commercial-type research aircraft of Langley Research Center's Advanced Transport Operating Systems (ATOPS) program. A mouse-driven color-display emulation of the CMP, which was developed with AI methods and used to test the AI software logic implementation, is discussed. The operation of the CMP was enhanced with the addition of a display which was quickly developed with AI methods. The display advises the pilot of conditions not satisfied when a mode does not arm or engage. The implementation of the CMP software logic has shown that the time required to develop, implement, and modify software systems can be significantly reduced with the use of the AI methods.

Systematic review of methods for evaluating healthcare research economic impact

PubMed Central

2010-01-01

Background The economic benefits of healthcare research require study so that appropriate resources can be allocated to this research, particularly in developing countries. As a first step, we performed a systematic review to identify the methods used to assess the economic impact of healthcare research, and the outcomes. Method An electronic search was conducted in relevant databases using a combination of specific keywords. In addition, 21 relevant Web sites were identified. Results The initial search yielded 8,416 articles. After studying titles, abstracts, and full texts, 18 articles were included in the analysis. Eleven other reports were found on Web sites. We found that the outcomes assessed as healthcare research payback included direct cost-savings, cost reductions in healthcare delivery systems, benefits from commercial advancement, and outcomes associated with improved health status. Two methods were used to study healthcare research payback: macro-economic studies, which examine the relationship between research studies and economic outcome at the aggregated level, and case studies, which examine specific research projects to assess economic impact. Conclusions Our study shows that different methods and outcomes can be used to assess the economic impacts of healthcare research. There is no unique methodological approach for the economic evaluation of such research. In our systematic search we found no research that had evaluated the economic return of research in low and middle income countries. We therefore recommend a consensus on practical guidelines at international level on the basis of more comprehensive methodologies (such as Canadian Academic of Health Science and payback frameworks) in order to build capacity, arrange for necessary informative infrastructures and promote necessary skills for economic evaluation studies. PMID:20196839

Journal article reporting standards for qualitative primary, qualitative meta-analytic, and mixed methods research in psychology: The APA Publications and Communications Board task force report.

PubMed

Levitt, Heidi M; Bamberg, Michael; Creswell, John W; Frost, David M; Josselson, Ruthellen; Suárez-Orozco, Carola

2018-01-01

The American Psychological Association Publications and Communications Board Working Group on Journal Article Reporting Standards for Qualitative Research (JARS-Qual Working Group) was charged with examining the state of journal article reporting standards as they applied to qualitative research and with generating recommendations for standards that would be appropriate for a wide range of methods within the discipline of psychology. These standards describe what should be included in a research report to enable and facilitate the review process. This publication marks a historical moment-the first inclusion of qualitative research in APA Style, which is the basis of both the Publication Manual of the American Psychological Association (APA, 2010) and APA Style CENTRAL, an online program to support APA Style. In addition to the general JARS-Qual guidelines, the Working Group has developed standards for both qualitative meta-analysis and mixed methods research. The reporting standards were developed for psychological qualitative research but may hold utility for a broad range of social sciences. They honor a range of qualitative traditions, methods, and reporting styles. The Working Group was composed of a group of researchers with backgrounds in varying methods, research topics, and approaches to inquiry. In this article, they present these standards and their rationale, and they detail the ways that the standards differ from the quantitative research reporting standards. They describe how the standards can be used by authors in the process of writing qualitative research for submission as well as by reviewers and editors in the process of reviewing research. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Prevalence of Phosphorus-Based Additives in the Australian Food Supply: A Challenge for Dietary Education?

PubMed

McCutcheon, Jemma; Campbell, Katrina; Ferguson, Maree; Day, Sarah; Rossi, Megan

2015-09-01

Phosphorus-based food additives may pose a significant risk in chronic kidney disease given the link between hyperphosphatemia and cardiovascular disease. The objective of the study was to determine the prevalence of phosphorus-based food additives in best-selling processed grocery products and to establish how they were reported on food labels. A data set of 3000 best-selling grocery items in Australia across 15 food and beverage categories was obtained for the 12 months ending December 2013 produced by the Nielsen Company's Homescan database. The nutrition labels of the products were reviewed in store for phosphorus additives. The type of additive, total number of additives, and method of reporting (written out in words or as an E number) were recorded. Presence of phosphorus-based food additives, number of phosphorus-based food additives per product, and the reporting method of additives on product ingredient lists. Phosphorus-based additives were identified in 44% of food and beverages reviewed. Additives were particularly common in the categories of small goods (96%), bakery goods (93%), frozen meals (75%), prepared foods (70%), and biscuits (65%). A total of 19 different phosphorus additives were identified across the reviewed products. From the items containing phosphorus additives, there was a median (minimum-maximum) of 2 (1-7) additives per product. Additives by E number (81%) was the most common method of reporting. Phosphorus-based food additives are common in the Australian food supply. This suggests that prioritizing phosphorus additive education may be an important strategy in the dietary management of hyperphosphatemia. Further research to establish a database of food items containing phosphorus-based additives is warranted. Copyright © 2015 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Evaluation of methods to calculate a wetlands water balance.

DOT National Transportation Integrated Search

2000-08-01

The development of a workable approach to estimating mitigation site water budgets is a high priority for VDOT and the wetlands research and design community in general as they attempt to create successful mitigation sites. Additionally, correct soil...

Vortex maneuver lift for super-cruise configurations

NASA Technical Reports Server (NTRS)

Campbell, J. F.; Gloss, B. B.; Lamar, J. E.

1976-01-01

Some of the theoretical and experimental research conducted at the NASA Langley Research Center is presented to investigate the subsonic vortex-lift producing capabilities for two classes of Super-Cruise designs: a close-coupled wing-canard arrangement and a slender wing configuration. In addition, several analytical methods are discussed for estimating critical structural design loads for thin, highly swept wings having separated leading-edge vortex flows.

Investigating Science Student Teachers' Ideas about Function and Anatomical Form of Two Human Sensory Organs, the Eye and the Ear

ERIC Educational Resources Information Center

Kunt, Halil

2016-01-01

The purpose of this research was to determine science student teachers' level of knowledge about the anatomical structure of two sensory organs, the eye and the ear, in addition to vision and hearing processes. Conducted with 86 science student teachers, research utilized drawing methods and open-ended questions as data collection instruments. The…

Cryopreservation of crane semen

USGS Publications Warehouse

Gee, G.F.; Harris, James

1991-01-01

The method for the cryopreservation of crane semen at Patuxent Wildlife Research Center is described in detail. Cryopreservation is useful for the long-term storage of crane semen and for specialized propagation needs. A 50% fertility rate from most sandhill cranes, Grus canadensis, inseminated with frozen-thawed semen can be expected. Additional research should improve the fertility rate and determine how applicable the technique is to other crane species.

Supporting 13 years of global change research: the history, technology, and methods of the Aspen FACE Experiment

Treesearch

Mark E. Kubiske; Anita R. Foss; Andrew J. Burton; Wendy S. Jones; Keith F. Lewin; John Nagy; Kurt S. Pregitzer; Donald R. Zak; David F. Karnosky

2015-01-01

This publication is an additional source of metadata for data stored and publicly available in the U.S. Department of Agriculture, Forest Service Research Data Archive. Here, we document the development, design, management, and operation of the experiment. In 1998, a team of scientists from the U.S. Forest Service, Department of Energy (DOE), Michigan Technological...

An exploration for research-oriented teaching model in biology teaching.

PubMed

Xing, Wanjin; Mo, Morigen; Su, Huimin

2014-07-01

Training innovative talents, as one of the major aims for Chinese universities, needs to reform the traditional teaching methods. The research-oriented teaching method has been introduced and its connotation and significance for Chinese university teaching have been discussed for years. However, few practical teaching methods for routine class teaching were proposed. In this paper, a comprehensive and concrete research-oriented teaching model with contents of reference value and evaluation method for class teaching was proposed based on the current teacher-guiding teaching model in China. We proposed that the research-oriented teaching model should include at least seven aspects on: (1) telling the scientific history for the skills to find out scientific questions; (2) replaying the experiments for the skills to solve scientific problems; (3) analyzing experimental data for learning how to draw a conclusion; (4) designing virtual experiments for learning how to construct a proposal; (5) teaching the lesson as the detectives solve the crime for learning the logic in scientific exploration; (6) guiding students how to read and consult the relative references; (7) teaching students differently according to their aptitude and learning ability. In addition, we also discussed how to evaluate the effects of the research-oriented teaching model in examination.

Evaluation of serum extracellular vesicle isolation methods for profiling miRNAs by next-generation sequencing

PubMed Central

Kotschote, Stefan; Bonin, Michael

2018-01-01

ABSTRACT Extracellular vesicles (EVs) are intercellular communicators with key functions in physiological and pathological processes and have recently garnered interest because of their diagnostic and therapeutic potential. The past decade has brought about the development and commercialization of a wide array of methods to isolate EVs from serum. Which subpopulations of EVs are captured strongly depends on the isolation method, which in turn determines how suitable resulting samples are for various downstream applications. To help clinicians and scientists choose the most appropriate approach for their experiments, isolation methods need to be comparatively characterized. Few attempts have been made to comprehensively analyse vesicular microRNAs (miRNAs) in patient biofluids for biomarker studies. To address this discrepancy, we set out to benchmark the performance of several isolation principles for serum EVs in healthy individuals and critically ill patients. Here, we compared five different methods of EV isolation in combination with two RNA extraction methods regarding their suitability for biomarker discovery-focused miRNA sequencing as well as biological characteristics of captured vesicles. Our findings reveal striking method-specific differences in both the properties of isolated vesicles and the ability of associated miRNAs to serve in biomarker research. While isolation by precipitation and membrane affinity was highly suitable for miRNA-based biomarker discovery, methods based on size-exclusion chromatography failed to separate patients from healthy volunteers. Isolated vesicles differed in size, quantity, purity and composition, indicating that each method captured distinctive populations of EVs as well as additional contaminants. Even though the focus of this work was on transcriptomic profiling of EV-miRNAs, our insights also apply to additional areas of research. We provide guidance for navigating the multitude of EV isolation methods available today and help researchers and clinicians make an informed choice about which strategy to use for experiments involving critically ill patients. PMID:29887978

Evaluation of serum extracellular vesicle isolation methods for profiling miRNAs by next-generation sequencing.

PubMed

Buschmann, Dominik; Kirchner, Benedikt; Hermann, Stefanie; Märte, Melanie; Wurmser, Christine; Brandes, Florian; Kotschote, Stefan; Bonin, Michael; Steinlein, Ortrud K; Pfaffl, Michael W; Schelling, Gustav; Reithmair, Marlene

2018-01-01

Extracellular vesicles (EVs) are intercellular communicators with key functions in physiological and pathological processes and have recently garnered interest because of their diagnostic and therapeutic potential. The past decade has brought about the development and commercialization of a wide array of methods to isolate EVs from serum. Which subpopulations of EVs are captured strongly depends on the isolation method, which in turn determines how suitable resulting samples are for various downstream applications. To help clinicians and scientists choose the most appropriate approach for their experiments, isolation methods need to be comparatively characterized. Few attempts have been made to comprehensively analyse vesicular microRNAs (miRNAs) in patient biofluids for biomarker studies. To address this discrepancy, we set out to benchmark the performance of several isolation principles for serum EVs in healthy individuals and critically ill patients. Here, we compared five different methods of EV isolation in combination with two RNA extraction methods regarding their suitability for biomarker discovery-focused miRNA sequencing as well as biological characteristics of captured vesicles. Our findings reveal striking method-specific differences in both the properties of isolated vesicles and the ability of associated miRNAs to serve in biomarker research. While isolation by precipitation and membrane affinity was highly suitable for miRNA-based biomarker discovery, methods based on size-exclusion chromatography failed to separate patients from healthy volunteers. Isolated vesicles differed in size, quantity, purity and composition, indicating that each method captured distinctive populations of EVs as well as additional contaminants. Even though the focus of this work was on transcriptomic profiling of EV-miRNAs, our insights also apply to additional areas of research. We provide guidance for navigating the multitude of EV isolation methods available today and help researchers and clinicians make an informed choice about which strategy to use for experiments involving critically ill patients.

Solder Joint Health Monitoring Testbed

NASA Technical Reports Server (NTRS)

Delaney, Michael M.; Flynn, James; Browder, Mark

2009-01-01

A method of monitoring the health of selected solder joints, called SJ-BIST, has been developed by Ridgetop Group Inc. under a Small Business Innovative Research (SBIR) contract. The primary goal of this research program is to test and validate this method in a flight environment using realistically seeded faults in selected solder joints. An additional objective is to gather environmental data for future development of physics-based and data-driven prognostics algorithms. A test board is being designed using a Xilinx FPGA. These boards will be tested both in flight and on the ground using a shaker table and an altitude chamber.

Alzheimer disease research in the 21st century: past and current failures, new perspectives and funding priorities.

PubMed

Pistollato, Francesca; Ohayon, Elan L; Lam, Ann; Langley, Gillian R; Novak, Thomas J; Pamies, David; Perry, George; Trushina, Eugenia; Williams, Robin S B; Roher, Alex E; Hartung, Thomas; Harnad, Stevan; Barnard, Neal; Morris, Martha Clare; Lai, Mei-Chun; Merkley, Ryan; Chandrasekera, P Charukeshi

2016-06-28

Much of Alzheimer disease (AD) research has been traditionally based on the use of animals, which have been extensively applied in an effort to both improve our understanding of the pathophysiological mechanisms of the disease and to test novel therapeutic approaches. However, decades of such research have not effectively translated into substantial therapeutic success for human patients. Here we critically discuss these issues in order to determine how existing human-based methods can be applied to study AD pathology and develop novel therapeutics. These methods, which include patient-derived cells, computational analysis and models, together with large-scale epidemiological studies represent novel and exciting tools to enhance and forward AD research. In particular, these methods are helping advance AD research by contributing multifactorial and multidimensional perspectives, especially considering the crucial role played by lifestyle risk factors in the determination of AD risk. In addition to research techniques, we also consider related pitfalls and flaws in the current research funding system. Conversely, we identify encouraging new trends in research and government policy. In light of these new research directions, we provide recommendations regarding prioritization of research funding. The goal of this document is to stimulate scientific and public discussion on the need to explore new avenues in AD research, considering outcome and ethics as core principles to reliably judge traditional research efforts and eventually undertake new research strategies.

Alzheimer disease research in the 21st century: past and current failures, new perspectives and funding priorities

PubMed Central

Pistollato, Francesca; Ohayon, Elan L.; Lam, Ann; Langley, Gillian R.; Novak, Thomas J.; Pamies, David; Perry, George; Trushina, Eugenia; Williams, Robin S.B.; Roher, Alex E.; Hartung, Thomas; Harnad, Stevan; Barnard, Neal; Morris, Martha Clare; Lai, Mei-Chun; Merkley, Ryan; Chandrasekera, P. Charukeshi

2016-01-01

Much of Alzheimer disease (AD) research has been traditionally based on the use of animals, which have been extensively applied in an effort to both improve our understanding of the pathophysiological mechanisms of the disease and to test novel therapeutic approaches. However, decades of such research have not effectively translated into substantial therapeutic success for human patients. Here we critically discuss these issues in order to determine how existing human-based methods can be applied to study AD pathology and develop novel therapeutics. These methods, which include patient-derived cells, computational analysis and models, together with large-scale epidemiological studies represent novel and exciting tools to enhance and forward AD research. In particular, these methods are helping advance AD research by contributing multifactorial and multidimensional perspectives, especially considering the crucial role played by lifestyle risk factors in the determination of AD risk. In addition to research techniques, we also consider related pitfalls and flaws in the current research funding system. Conversely, we identify encouraging new trends in research and government policy. In light of these new research directions, we provide recommendations regarding prioritization of research funding. The goal of this document is to stimulate scientific and public discussion on the need to explore new avenues in AD research, considering outcome and ethics as core principles to reliably judge traditional research efforts and eventually undertake new research strategies. PMID:27229915

Conducting a meta-ethnography of qualitative literature: lessons learnt.

PubMed

Atkins, Salla; Lewin, Simon; Smith, Helen; Engel, Mark; Fretheim, Atle; Volmink, Jimmy

2008-04-16

Qualitative synthesis has become more commonplace in recent years. Meta-ethnography is one of several methods for synthesising qualitative research and is being used increasingly within health care research. However, many aspects of the steps in the process remain ill-defined. We utilized the seven stages of the synthesis process to synthesise qualitative research on adherence to tuberculosis treatment. In this paper we discuss the methodological and practical challenges faced; of particular note are the methods used in our synthesis, the additional steps that we found useful in clarifying the process, and the key methodological challenges encountered in implementing the meta-ethnographic approach. The challenges included shaping an appropriate question for the synthesis; identifying relevant studies; assessing the quality of the studies; and synthesising findings across a very large number of primary studies from different contexts and research traditions. We offer suggestions that may assist in undertaking meta-ethnographies in the future. Meta-ethnography is a useful method for synthesising qualitative research and for developing models that interpret findings across multiple studies. Despite its growing use in health research, further research is needed to address the wide range of methodological and epistemological questions raised by the approach.

Conducting a meta-ethnography of qualitative literature: Lessons learnt

PubMed Central

Atkins, Salla; Lewin, Simon; Smith, Helen; Engel, Mark; Fretheim, Atle; Volmink, Jimmy

2008-01-01

Background Qualitative synthesis has become more commonplace in recent years. Meta-ethnography is one of several methods for synthesising qualitative research and is being used increasingly within health care research. However, many aspects of the steps in the process remain ill-defined. Discussion We utilized the seven stages of the synthesis process to synthesise qualitative research on adherence to tuberculosis treatment. In this paper we discuss the methodological and practical challenges faced; of particular note are the methods used in our synthesis, the additional steps that we found useful in clarifying the process, and the key methodological challenges encountered in implementing the meta-ethnographic approach. The challenges included shaping an appropriate question for the synthesis; identifying relevant studies; assessing the quality of the studies; and synthesising findings across a very large number of primary studies from different contexts and research traditions. We offer suggestions that may assist in undertaking meta-ethnographies in the future. Summary Meta-ethnography is a useful method for synthesising qualitative research and for developing models that interpret findings across multiple studies. Despite its growing use in health research, further research is needed to address the wide range of methodological and epistemological questions raised by the approach. PMID:18416812

Executable Architecture Research at Old Dominion University

NASA Technical Reports Server (NTRS)

Tolk, Andreas; Shuman, Edwin A.; Garcia, Johnny J.

2011-01-01

Executable Architectures allow the evaluation of system architectures not only regarding their static, but also their dynamic behavior. However, the systems engineering community do not agree on a common formal specification of executable architectures. To close this gap and identify necessary elements of an executable architecture, a modeling language, and a modeling formalism is topic of ongoing PhD research. In addition, systems are generally defined and applied in an operational context to provide capabilities and enable missions. To maximize the benefits of executable architectures, a second PhD effort introduces the idea of creating an executable context in addition to the executable architecture. The results move the validation of architectures from the current information domain into the knowledge domain and improve the reliability of such validation efforts. The paper presents research and results of both doctoral research efforts and puts them into a common context of state-of-the-art of systems engineering methods supporting more agility.

The utilisation of health research in policy-making: concepts, examples and methods of assessment

PubMed Central

Hanney, Stephen R; Gonzalez-Block, Miguel A; Buxton, Martin J; Kogan, Maurice

2003-01-01

The importance of health research utilisation in policy-making, and of understanding the mechanisms involved, is increasingly recognised. Recent reports calling for more resources to improve health in developing countries, and global pressures for accountability, draw greater attention to research-informed policy-making. Key utilisation issues have been described for at least twenty years, but the growing focus on health research systems creates additional dimensions. The utilisation of health research in policy-making should contribute to policies that may eventually lead to desired outcomes, including health gains. In this article, exploration of these issues is combined with a review of various forms of policy-making. When this is linked to analysis of different types of health research, it assists in building a comprehensive account of the diverse meanings of research utilisation. Previous studies report methods and conceptual frameworks that have been applied, if with varying degrees of success, to record utilisation in policy-making. These studies reveal various examples of research impact within a general picture of underutilisation. Factors potentially enhancing utilisation can be identified by exploration of: priority setting; activities of the health research system at the interface between research and policy-making; and the role of the recipients, or 'receptors', of health research. An interfaces and receptors model provides a framework for analysis. Recommendations about possible methods for assessing health research utilisation follow identification of the purposes of such assessments. Our conclusion is that research utilisation can be better understood, and enhanced, by developing assessment methods informed by conceptual analysis and review of previous studies. PMID:12646071

Additive manufacturing of materials: Opportunities and challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Babu, Sudarsanam Suresh; Love, Lonnie J.; Dehoff, Ryan R.

Additive manufacturing (also known as 3D printing) is considered a disruptive technology for producing components with topologically optimized complex geometries as well as functionalities that are not achievable by traditional methods. The realization of the full potential of 3D printing is stifled by a lack of computational design tools, generic material feedstocks, techniques for monitoring thermomechanical processes under in situ conditions, and especially methods for minimizing anisotropic static and dynamic properties brought about by microstructural heterogeneity. In this paper, we discuss the role of interdisciplinary research involving robotics and automation, process control, multiscale characterization of microstructure and properties, and high-performancemore » computational tools to address each of these challenges. In addition, emerging pathways to scale up additive manufacturing of structural materials to large sizes (>1 m) and higher productivities (5–20 kg/h) while maintaining mechanical performance and geometrical flexibility are also discussed.« less

Additive manufacturing of materials: Opportunities and challenges

DOE PAGES

Babu, Sudarsanam Suresh; Love, Lonnie J.; Dehoff, Ryan R.; ...

2015-11-01

Additive manufacturing (also known as 3D printing) is considered a disruptive technology for producing components with topologically optimized complex geometries as well as functionalities that are not achievable by traditional methods. The realization of the full potential of 3D printing is stifled by a lack of computational design tools, generic material feedstocks, techniques for monitoring thermomechanical processes under in situ conditions, and especially methods for minimizing anisotropic static and dynamic properties brought about by microstructural heterogeneity. In this paper, we discuss the role of interdisciplinary research involving robotics and automation, process control, multiscale characterization of microstructure and properties, and high-performancemore » computational tools to address each of these challenges. In addition, emerging pathways to scale up additive manufacturing of structural materials to large sizes (>1 m) and higher productivities (5–20 kg/h) while maintaining mechanical performance and geometrical flexibility are also discussed.« less

Manipulating crystallization with molecular additives.

PubMed

Shtukenberg, Alexander G; Lee, Stephanie S; Kahr, Bart; Ward, Michael D

2014-01-01

Given the importance of organic crystals in a wide range of industrial applications, the chemistry, biology, materials science, and chemical engineering communities have focused considerable attention on developing methods to control crystal structure, size, shape, and orientation. Tailored additives have been used to control crystallization to great effect, presumably by selectively binding to particular crystallographic surfaces and sites. However, substantial knowledge gaps still exist in the fundamental mechanisms that govern the formation and growth of organic crystals in both the absence and presence of additives. In this review, we highlight research discoveries that reveal the role of additives, either introduced by design or present adventitiously, on various stages of formation and growth of organic crystals, including nucleation, dislocation spiral growth mechanisms, growth inhibition, and nonclassical crystal morphologies. The insights from these investigations and others of their kind are likely to guide the development of innovative methods to manipulate crystallization for a wide range of materials and applications.

Metamethod study of qualitative psychotherapy research on clients' experiences: Review and recommendations.

PubMed

Levitt, Heidi M; Pomerville, Andrew; Surace, Francisco I; Grabowski, Lauren M

2017-11-01

A metamethod study is a qualitative meta-analysis focused upon the methods and procedures used in a given research domain. These studies are rare in psychological research. They permit both the documentation of the informal standards within a field of research and recommendations for future work in that area. This paper presents a metamethod analysis of a substantial body of qualitative research that focused on clients' experiences in psychotherapy (109 studies). This review examined the ways that methodological integrity has been established across qualitative research methods. It identified the numbers of participants recruited and the form of data collection used (e.g., semistructured interviews, diaries). As well, it examined the types of checks employed to increase methodological integrity, such as participant counts, saturation, reflexivity techniques, participant feedback, or consensus and auditing processes. Central findings indicated that the researchers quite flexibly integrated procedures associated with one method into studies using other methods in order to strengthen their rigor. It appeared normative to adjust procedures to advance methodological integrity. These findings encourage manuscript reviewers to assess the function of procedures within a study rather than to require researchers to adhere to the set of procedures associated with a method. In addition, when epistemological approaches were mentioned they were overwhelmingly constructivist in nature, despite the increasing use of procedures traditionally associated with objectivist perspectives. It is recommended that future researchers do more to explicitly describe the functions of their procedures so that they are coherently situated within the epistemological approaches in use. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

The HCUP SID Imputation Project: Improving Statistical Inferences for Health Disparities Research by Imputing Missing Race Data.

PubMed

Ma, Yan; Zhang, Wei; Lyman, Stephen; Huang, Yihe

2018-06-01

To identify the most appropriate imputation method for missing data in the HCUP State Inpatient Databases (SID) and assess the impact of different missing data methods on racial disparities research. HCUP SID. A novel simulation study compared four imputation methods (random draw, hot deck, joint multiple imputation [MI], conditional MI) for missing values for multiple variables, including race, gender, admission source, median household income, and total charges. The simulation was built on real data from the SID to retain their hierarchical data structures and missing data patterns. Additional predictive information from the U.S. Census and American Hospital Association (AHA) database was incorporated into the imputation. Conditional MI prediction was equivalent or superior to the best performing alternatives for all missing data structures and substantially outperformed each of the alternatives in various scenarios. Conditional MI substantially improved statistical inferences for racial health disparities research with the SID. © Health Research and Educational Trust.

Preparing and Presenting Effective Research Posters

PubMed Central

Miller, Jane E

2007-01-01

Objectives Posters are a common way to present results of a statistical analysis, program evaluation, or other project at professional conferences. Often, researchers fail to recognize the unique nature of the format, which is a hybrid of a published paper and an oral presentation. This methods note demonstrates how to design research posters to convey study objectives, methods, findings, and implications effectively to varied professional audiences. Methods A review of existing literature on research communication and poster design is used to identify and demonstrate important considerations for poster content and layout. Guidelines on how to write about statistical methods, results, and statistical significance are illustrated with samples of ineffective writing annotated to point out weaknesses, accompanied by concrete examples and explanations of improved presentation. A comparison of the content and format of papers, speeches, and posters is also provided. Findings Each component of a research poster about a quantitative analysis should be adapted to the audience and format, with complex statistical results translated into simplified charts, tables, and bulleted text to convey findings as part of a clear, focused story line. Conclusions Effective research posters should be designed around two or three key findings with accompanying handouts and narrative description to supply additional technical detail and encourage dialog with poster viewers. PMID:17355594

Variation and Defect Tolerance for Nano Crossbars

NASA Astrophysics Data System (ADS)

Tunc, Cihan

With the extreme shrinking in CMOS technology, quantum effects and manufacturing issues are getting more crucial. Hence, additional shrinking in CMOS feature size seems becoming more challenging, difficult, and costly. On the other hand, emerging nanotechnology has attracted many researchers since additional scaling down has been demonstrated by manufacturing nanowires, Carbon nanotubes as well as molecular switches using bottom-up manufacturing techniques. In addition to the progress in manufacturing, developments in architecture show that emerging nanoelectronic devices will be promising for the future system designs. Using nano crossbars, which are composed of two sets of perpendicular nanowires with programmable intersections, it is possible to implement logic functions. In addition, nano crossbars present some important features as regularity, reprogrammability, and interchangeability. Combining these features, researchers have presented different effective architectures. Although bottom-up nanofabrication can greatly reduce manufacturing costs, due to low controllability in the manufacturing process, some critical issues occur. Bottom- up nanofabrication process results in high variation compared to conventional top- down lithography used in CMOS technology. In addition, an increased failure rate is expected. Variation and defect tolerance methods used for conventional CMOS technology seem inadequate for adapting to emerging nano technology because the variation and the defect rate for emerging nano technology is much more than current CMOS technology. Therefore, variations and defect tolerance methods for emerging nano technology are necessary for a successful transition. In this work, in order to tolerate variations for crossbars, we introduce a framework that is established based on reprogrammability and interchangeability features of nano crossbars. This framework is shown to be applicable for both FET-based and diode-based nano crossbars. We present a characterization testing method which requires minimal number of test vectors. We formulate the variation optimization problem using Simulated Annealing with different optimization goals. Furthermore, we extend the framework for defect tolerance. Experimental results and comparison of proposed framework with exhaustive methods confirm its effectiveness for both variation and defect tolerance.

Snow and ice control at extreme temperatures.

DOT National Transportation Integrated Search

2011-04-25

As expected, most state and provincial DOTs that we spoke with are using traditional methods to prevent and : remove snow and ice at very low temperatures. In addition to a review of current research, we spoke with six winter : maintenance profession...

Studies and research concerning BNFP: process monitoring and process surveillance demonstration program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kight, H R

1979-11-01

Computerized methods of monitoring process functions and alarming off-standard conditions were implemented and demonstrated during the FY 1979 Uranium Run. In addition, prototype applications of instruments for the purpose of tamper indication and surveillance were tested.

Assessing culture via the Internet: methods and techniques for psychological research.

PubMed

Barry, D T

2001-02-01

This study examines the acculturation experiences of Arabic immigrants and assesses the utility of the Internet as a data collection tool. Based on in-depth pilot interview data from 10 male Arabic immigrants and items selected from pre-existing measures, the Male Arabic Ethnic Identity Measure (MAEIM) was developed. Male Arab immigrants (115 males) were solicited through traditional methods in addition to the Internet. Satisfactory reliability and validity were reported for the MAEIM. No significant differences emerged between the Internet and Midwestern samples. The Internet proved to be an effective method for soliciting a relatively large, geographically dispersed sample of Arabic immigrants. The use of the Internet as a research tool is examined in the context of anonymity, networking, low-cost, perceived interactive control, methodological rigor, and external validity. The Internet was an effective vehicle for addressing concerns raised by prospective participants. It is suggested that the Internet may be an important method to assess culture-relevant variables in further research on Arab and other immigrant populations.

Illumination with a Dim Bulb? What do social scientists learn by employing qualitative data analysis software (QDAS) in the service of multi-method designs?

PubMed Central

White, Michael J.; Judd, Maya D.; Poliandri, Simone

2012-01-01

Although there has been much optimistic discussion of integrating quantitative and qualitative findings into sociological analysis, there remains a gap regarding the application of mixed approaches. We examine the potential gains and pitfalls of such integration in the context of the growing analytic power of contemporary qualitative data analysis software (QDAS) programs. We illustrate the issues with our own research in a mixed-methods project examining low fertility in Italy, a project that combines analysis of large nationally representative survey data with qualitative in-depth interviews with women across four (4) cities in Italy. Despite the enthusiasm for mixed-methods research, the available software appears to be underutilized. In addition, we suggest that the sociological research community will want to address several conceptual and inferential issues with these approaches. PMID:23543938

Conceptions of Good Science in Our Data-Rich World.

PubMed

Elliott, Kevin C; Cheruvelil, Kendra S; Montgomery, Georgina M; Soranno, Patricia A

2016-10-01

Scientists have been debating for centuries the nature of proper scientific methods. Currently, criticisms being thrown at data-intensive science are reinvigorating these debates. However, many of these criticisms represent long-standing conflicts over the role of hypothesis testing in science and not just a dispute about the amount of data used. Here, we show that an iterative account of scientific methods developed by historians and philosophers of science can help make sense of data-intensive scientific practices and suggest more effective ways to evaluate this research. We use case studies of Darwin's research on evolution by natural selection and modern-day research on macrosystems ecology to illustrate this account of scientific methods and the innovative approaches to scientific evaluation that it encourages. We point out recent changes in the spheres of science funding, publishing, and education that reflect this richer account of scientific practice, and we propose additional reforms.

Conceptions of Good Science in Our Data-Rich World

PubMed Central

Elliott, Kevin C.; Cheruvelil, Kendra S.; Montgomery, Georgina M.; Soranno, Patricia A.

2016-01-01

Abstract Scientists have been debating for centuries the nature of proper scientific methods. Currently, criticisms being thrown at data-intensive science are reinvigorating these debates. However, many of these criticisms represent long-standing conflicts over the role of hypothesis testing in science and not just a dispute about the amount of data used. Here, we show that an iterative account of scientific methods developed by historians and philosophers of science can help make sense of data-intensive scientific practices and suggest more effective ways to evaluate this research. We use case studies of Darwin's research on evolution by natural selection and modern-day research on macrosystems ecology to illustrate this account of scientific methods and the innovative approaches to scientific evaluation that it encourages. We point out recent changes in the spheres of science funding, publishing, and education that reflect this richer account of scientific practice, and we propose additional reforms. PMID:29599533

Illumination with a Dim Bulb? What do social scientists learn by employing qualitative data analysis software (QDAS) in the service of multi-method designs?

PubMed

White, Michael J; Judd, Maya D; Poliandri, Simone

2012-08-01

Although there has been much optimistic discussion of integrating quantitative and qualitative findings into sociological analysis, there remains a gap regarding the application of mixed approaches. We examine the potential gains and pitfalls of such integration in the context of the growing analytic power of contemporary qualitative data analysis software (QDAS) programs. We illustrate the issues with our own research in a mixed-methods project examining low fertility in Italy, a project that combines analysis of large nationally representative survey data with qualitative in-depth interviews with women across four (4) cities in Italy. Despite the enthusiasm for mixed-methods research, the available software appears to be underutilized. In addition, we suggest that the sociological research community will want to address several conceptual and inferential issues with these approaches.

93 years of stand density and land-use legacy research at the Coulter Ranch Study Site (P-53)

Treesearch

Andrew J. Sanchez Meador; Margaret M. Moore

2008-01-01

In 1913, the Fort Valley Experimental Forest initiated an unprecedented case-study experiment to determine the effects of harvesting methods on tree regeneration and growth on a ponderosa pine-Gambel oak forest at Coulter Ranch in northern Arizona. The harvesting methods examined were seed-tree, group selection, and light selection. In addition, the effects of...

Methods of Science Investigation Part 2: Results of Implementation of a Curriculum Fostering Original Scientific Research

NASA Astrophysics Data System (ADS)

Danch, J. M.

2008-12-01

Originally designed to allow secondary students with special needs to participate in original scientific research, the Methods of Science Curriculum was piloted in 2008. Students participating included those with special needs, English language learners, and the general population. Students were incrementally graduated from traditional inquiry activities towards authentic student-generated research projects. Students were evaluated via class work grades, an in-school symposium and a pre/post test. 100 percent of participants successfully completed and presented their original research. The pre/post evaluation demonstrated improvement for 91 percent of participants. An unanticipated result was the performance and growth of English language learners, possibly because of the emphasis on the creative and active process of science rather than vocabulary. A teacher-training program is being developed for expansion of the curriculum to additional schools in 2009.

Development of an Improved Simulator for Chemical and Microbial EOR Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pope, Gary A.; Sepehrnoori, Kamy; Delshad, Mojdeh

2000-09-11

The objective of this research was to extend the capability of an existing simulator (UTCHEM) to improved oil recovery methods that use surfactants, polymers, gels, alkaline chemicals, microorganisms and foam as well as various combinations of these in both conventional and naturally fractured oil reservoirs. Task 1 is the addition of a dual-porosity model for chemical improved of recovery processes in naturally fractured oil reservoirs. Task 2 is the addition of a foam model. Task 3 addresses several numerical and coding enhancements that will greatly improve the versatility and performance of UTCHEM. Task 4 is the enhancements of physical propertymore » models.« less

Flight Test Results of an Angle of Attack and Angle of Sideslip Calibration Method Using Output-Error Optimization

NASA Technical Reports Server (NTRS)

Siu, Marie-Michele; Martos, Borja; Foster, John V.

2013-01-01

As part of a joint partnership between the NASA Aviation Safety Program (AvSP) and the University of Tennessee Space Institute (UTSI), research on advanced air data calibration methods has been in progress. This research was initiated to expand a novel pitot-static calibration method that was developed to allow rapid in-flight calibration for the NASA Airborne Subscale Transport Aircraft Research (AirSTAR) facility. This approach uses Global Positioning System (GPS) technology coupled with modern system identification methods that rapidly computes optimal pressure error models over a range of airspeed with defined confidence bounds. Subscale flight tests demonstrated small 2-s error bounds with significant reduction in test time compared to other methods. Recent UTSI full scale flight tests have shown airspeed calibrations with the same accuracy or better as the Federal Aviation Administration (FAA) accepted GPS 'four-leg' method in a smaller test area and in less time. The current research was motivated by the desire to extend this method for inflight calibration of angle of attack (AOA) and angle of sideslip (AOS) flow vanes. An instrumented Piper Saratoga research aircraft from the UTSI was used to collect the flight test data and evaluate flight test maneuvers. Results showed that the output-error approach produces good results for flow vane calibration. In addition, maneuvers for pitot-static and flow vane calibration can be integrated to enable simultaneous and efficient testing of each system.

Unspoken phenomena: using the photovoice method to enrich phenomenological inquiry.

PubMed

Plunkett, Robyn; Leipert, Beverly D; Ray, Susan L

2013-06-01

Photovoice is a powerful method that is gaining momentum in nursing research. As a relatively new method in nursing science, the situatedness of photovoice within or alongside various research methodologies in a single study remains in a stage of early development. The purpose of this paper is to discuss the photovoice method as a means to elicit phenomenological data when researching the lived experience. While the foundational bases of phenomenology and photovoice differ substantially, the argument presented in this paper suggests that the photovoice method can be successfully used in phenomenological inquiry provided that significant rigour checks are pursued. This includes reflecting upon the origins and understandings of both methodology and method to promote methodological congruency. Data collection and analysis approaches that contribute to phenomenological inquiry using the photovoice method in addition to rigour and ethical considerations are discussed. The use of data generated from photovoice in phenomenological inquiry may fill a void of understanding furnished by limitations of traditional phenomenological inquiry and of spoken language and can enhance understanding of the lived experience, which may not always be best understood by words alone. © 2012 John Wiley & Sons Ltd.

Air Pollution Forecasts: An Overview

PubMed Central

Bai, Lu; Wang, Jianzhou; Lu, Haiyan

2018-01-01

Air pollution is defined as a phenomenon harmful to the ecological system and the normal conditions of human existence and development when some substances in the atmosphere exceed a certain concentration. In the face of increasingly serious environmental pollution problems, scholars have conducted a significant quantity of related research, and in those studies, the forecasting of air pollution has been of paramount importance. As a precaution, the air pollution forecast is the basis for taking effective pollution control measures, and accurate forecasting of air pollution has become an important task. Extensive research indicates that the methods of air pollution forecasting can be broadly divided into three classical categories: statistical forecasting methods, artificial intelligence methods, and numerical forecasting methods. More recently, some hybrid models have been proposed, which can improve the forecast accuracy. To provide a clear perspective on air pollution forecasting, this study reviews the theory and application of those forecasting models. In addition, based on a comparison of different forecasting methods, the advantages and disadvantages of some methods of forecasting are also provided. This study aims to provide an overview of air pollution forecasting methods for easy access and reference by researchers, which will be helpful in further studies. PMID:29673227

Air Pollution Forecasts: An Overview.

PubMed

Bai, Lu; Wang, Jianzhou; Ma, Xuejiao; Lu, Haiyan

2018-04-17

Air pollution is defined as a phenomenon harmful to the ecological system and the normal conditions of human existence and development when some substances in the atmosphere exceed a certain concentration. In the face of increasingly serious environmental pollution problems, scholars have conducted a significant quantity of related research, and in those studies, the forecasting of air pollution has been of paramount importance. As a precaution, the air pollution forecast is the basis for taking effective pollution control measures, and accurate forecasting of air pollution has become an important task. Extensive research indicates that the methods of air pollution forecasting can be broadly divided into three classical categories: statistical forecasting methods, artificial intelligence methods, and numerical forecasting methods. More recently, some hybrid models have been proposed, which can improve the forecast accuracy. To provide a clear perspective on air pollution forecasting, this study reviews the theory and application of those forecasting models. In addition, based on a comparison of different forecasting methods, the advantages and disadvantages of some methods of forecasting are also provided. This study aims to provide an overview of air pollution forecasting methods for easy access and reference by researchers, which will be helpful in further studies.

Effect of different sulfadimidine addition methods on its degradation behaviour in swine manure.

PubMed

Ren, Tian-Tian; Li, Xiao-Yang; Wang, Yan; Zou, Yong-De; Liao, Xin-Di; Liang, Juan-Boo; Wu, Yin-Bao

2017-03-01

Sulfadimidine (SM2) is commonly used in the swine industry and enters the environment via faeces. In recent years, advances in the ecotoxicology of SM2 have become a popular research interest with two common research methods including swine manure collection from swine fed with a diet containing SM2 and directly adding SM2. The purpose of this experiment was to compare SM2 degradation behaviour in pig manure with two different SM2 addition methods. The results showed that the degradation half-lives of SM2 in manure from SM2-fed swine treatment were 33.2 and 32.0 days at the initial addition level of SM2 at 32.1 and 64.3 mg/kg, respectively. This was significantly longer than that in manure directly adding SM2 treatment with the half-lives of 21.4 and 14.8 days. The metabolite of SM2 N 4 -acetyl-sulfamethazine occurred in manure from SM2-fed swine treatment but was not detected in directly adding SM2 treatment. The pH in manure from SM2-fed swine treatment was significantly lower than that in directly adding SM2 treatment, but the values of organic carbon, total nitrogen, and electrical conductivity in manure from SM2-fed swine treatment were significantly higher than those in manure directly adding SM2 treatment. Meanwhile, although the copy number of bacteria had no significant difference between two treatments, there was a significant difference in bacteria diversity. Results of the present study demonstrated that the presence of the metabolites, chemical property, and microbial diversity might be the reason for different SM2 degradation behaviours on different addition methods. Thus, the method using manure with SM2 collected from swine could obtain more accurate results for the ecotoxicological study of SM2.

The Effect of Multispectral Image Fusion Enhancement on Human Efficiency

DTIC Science & Technology

2017-03-20

human visual system by applying a technique commonly used in visual percep- tion research : ideal observer analysis. Using this approach, we establish...applications, analytic tech- niques, and procedural methods used across studies. This paper uses ideal observer analysis to establish a frame- work that allows...augmented similarly to incorpo- rate research involving more complex stimulus content. Additionally, the ideal observer can be adapted for a number of

Leadership Theory and Practice: Where East Meets West

DTIC Science & Technology

1989-06-01

leadership concepts can be assimilated to good advantage by the Chinese. and what additional research ei’forts for the armed forces of the Republic... research ef- forts for the armed forces of the Republic of China should be undertaken. The this7s "su ,, L.,uitJ _ description of the eCHO sampiing...29 A. THE ECHO SAMPLING TECHNIQUE ....................... 29 B. THE MCBER SAMPLING METHOD .. ....................... 33 IV. CRITICAL

Digital Technologies in the Treatment of Anxiety: Recent Innovations and Future Directions.

PubMed

Firth, Joseph; Torous, John; Carney, Rebekah; Newby, Jill; Cosco, Theodore D; Christensen, Helen; Sarris, Jerome

2018-05-19

This review aims to provide a comprehensive overview of the efficacy, limitations, and future of e-health treatments for anxiety. Within this, we provide detail on "first-generation" e-health approaches, such as computerized therapies. Additionally, we assess the emergence and early efficacy of newer methods of treatment delivery, including smartphone apps and virtual reality interventions, discussing the potential and pitfalls for each. There is now substantial clinical research demonstrating the efficacy of internet-delivered cognitive behavioral therapy in the treatment of anxiety. However, the ability of these interventions for engaging patients in "real-world" settings is unclear. Recently, smartphone apps for anxiety have presented a more popular and ubiquitous method of intervention delivery, although the evidence base supporting these newer approaches drastically falls behind the extensive marketing and commercialization efforts currently driving their development. Meanwhile, the increasing availability of novel technologies, such as "virtual reality" (VR), introduces further potential of e-health treatments for generalized anxiety and anxiety-related disorders such as phobias and obsessive compulsive disorder, while also creating additional challenges for research. Although still in its infancy, e-health research is already presenting several promising avenues for delivering effective and scalable treatments for anxiety. Nonetheless, several important steps must be taken in order for academic research to keep pace with continued technological advances.

The effect of earthworms (Lumbricus rubellus) in feed formulation on growth and retention of eel (Anguilla bicolor)

NASA Astrophysics Data System (ADS)

Jatmiko, P. C.; Madinah, N. A.; Agustono; Nurhajati, T.

2018-04-01

Earthworms (Lumbricus rubellus) has high protein content. The addition of earthworms in formulation feed not only can increase the appetite of eel but also increase the nutritional content in feed. The purpose of this research was to know the potention of earthworms L. rubellus in feed formulation that can gives increase on the growth and retention. Research’s method was using Complete Randomized Design (CRD) consisted of five treatments and four replication. Treatments in this research ware the different addition of earthworms L. rubellus in feed formulation which were 0 %, 25 %, 50 %, 75 % and 100 %. The result showed that there were significantly different on the growth and retention of eel during maintenance for 21 days. the best result was on the 100% of earthworms L.rubellus addition.

Numerical Simulation of One- And Two-Phase Flows In Propulsion Systems

NASA Technical Reports Server (NTRS)

Gilinsky, Mikhail M.

2002-01-01

In this report, we present some results of problems investigated during joint research between the Hampton University (HU) Fluid Mechanics and Acoustics Laboratory (FM&AL), NASA Glenn Research Center (GRC) and the Hyper-X Program of the NASA Langley Research Center (LaRC). This work is supported by joint research between the NASA GRC/HU FM&AL and the Institute of Mechanics at Moscow State University (IM/MSU) in Russia under a Civilian Research and Development Foundation (CRDF) grant, #RE1-2068. The main areas of current scientific interest of the FM&AL include an investigation of the proposed and patented advanced methods for aircraft engine thrust and noise benefits. These methods are based on nontraditional 3D (three dimensional) corrugated and composite nozzle, inlet, propeller and screw designs such as the Bluebell and Telescope nozzles, Mobius-shaped screws, etc. These are the main subject of our other projects, of which one is the NASA MURED's (Minority University Research and Education Division) FAR (Faculty Awards for Research) Award, #NAG-3-2249. Working jointly with this project team, our team also analyzes additional methods for exhaust jet noise reduction. These methods are without essential thrust loss and even with thrust augmentation. The research is focused on a wide regime of problems in the propulsion field as well as in experimental testing and theoretical and numerical simulation analyses for advanced aircraft and rocket engines. The FM&AL Team uses analytical methods, numerical simulations and experimental tests at the Hampton University campus, NASA and IM/MSU. The main results obtained by FM&AL team were published in the papers and patents.

Math Science Partnership of Southwest Pennsylvania: Measuring Progress Toward Goals

DTIC Science & Technology

2009-01-01

project design did not include a control group , the evaluation team used an alternative method to form comparison groups of school districts. The primary...providers. Additionally, educator networks bring together groups of teachers or coaches from across the region who are using common research -based curricula...goals. In addition, this study was not implemented as a randomized experiment with a control group , and this fact limits the ability to make

Mathematical correlation of modal parameter identification methods via system realization theory

NASA Technical Reports Server (NTRS)

Juang, J. N.

1986-01-01

A unified approach is introduced using system realization theory to derive and correlate modal parameter identification methods for flexible structures. Several different time-domain and frequency-domain methods are analyzed and treated. A basic mathematical foundation is presented which provides insight into the field of modal parameter identification for comparison and evaluation. The relation among various existing methods is established and discussed. This report serves as a starting point to stimulate additional research towards the unification of the many possible approaches for modal parameter identification.

Quantifying complexity in translational research: an integrated approach.

PubMed

Munoz, David A; Nembhard, Harriet Black; Kraschnewski, Jennifer L

2014-01-01

The purpose of this paper is to quantify complexity in translational research. The impact of major operational steps and technical requirements is calculated with respect to their ability to accelerate moving new discoveries into clinical practice. A three-phase integrated quality function deployment (QFD) and analytic hierarchy process (AHP) method was used to quantify complexity in translational research. A case study in obesity was used to usability. Generally, the evidence generated was valuable for understanding various components in translational research. Particularly, the authors found that collaboration networks, multidisciplinary team capacity and community engagement are crucial for translating new discoveries into practice. As the method is mainly based on subjective opinion, some argue that the results may be biased. However, a consistency ratio is calculated and used as a guide to subjectivity. Alternatively, a larger sample may be incorporated to reduce bias. The integrated QFD-AHP framework provides evidence that could be helpful to generate agreement, develop guidelines, allocate resources wisely, identify benchmarks and enhance collaboration among similar projects. Current conceptual models in translational research provide little or no clue to assess complexity. The proposed method aimed to fill this gap. Additionally, the literature review includes various features that have not been explored in translational research.

Differentiating between descriptive and interpretive phenomenological research approaches.

PubMed

Matua, Gerald Amandu; Van Der Wal, Dirk Mostert

2015-07-01

To provide insight into how descriptive and interpretive phenomenological research approaches can guide nurse researchers during the generation and application of knowledge. Phenomenology is a discipline that investigates people's experiences to reveal what lies 'hidden' in them. It has become a major philosophy and research method in the humanities, human sciences and arts. Phenomenology has transitioned from descriptive phenomenology, which emphasises the 'pure' description of people's experiences, to the 'interpretation' of such experiences, as in hermeneutic phenomenology. However, nurse researchers are still challenged by the epistemological and methodological tenets of these two methods. The data came from relevant online databases and research books. A review of selected peer-reviewed research and discussion papers published between January 1990 and December 2013 was conducted using CINAHL, Science Direct, PubMed and Google Scholar databases. In addition, selected textbooks that addressed phenomenology as a philosophy and as a research methodology were used. Evidence from the literature indicates that most studies following the 'descriptive approach' to research are used to illuminate poorly understood aspects of experiences. In contrast, the 'interpretive/hermeneutic approach' is used to examine contextual features of an experience in relation to other influences such as culture, gender, employment or wellbeing of people or groups experiencing the phenomenon. This allows investigators to arrive at a deeper understanding of the experience, so that caregivers can derive requisite knowledge needed to address such clients' needs. Novice nurse researchers should endeavour to understand phenomenology both as a philosophy and research method. This is vitally important because in-depth understanding of phenomenology ensures that the most appropriate method is chosen to implement a study and to generate knowledge for nursing practice. This paper adds to the current debate on why it is important for nurse researchers to clearly understand phenomenology as a philosophy and research method before embarking on a study. The paper guides novice researchers on key methodological decisions they need to make when using descriptive or interpretive phenomenological research approaches.

The ethics in qualitative health research: special considerations.

PubMed

Peter, Elizabeth

2015-09-01

A sound knowledge of the nature of qualitative research, along with an appreciation of some special ethical considerations, is needed for rigorous reviews to be conducted. The overall character of qualitative research is described with an emphasis on the tendency of qualitative researchers to explore sensitive topics using theoretically informed methods. A number of specific features of qualitative that require additional ethical attention and awareness are also examined including the following: 1) participants are frequently quite vulnerable and require protection because the data collection methods, such as in-depth interviews, can delve into personally and politically charged matters; 2) naturalistic observation can raise concerns regarding privacy and consent; 3) the potential for the identifiability of the results of this research may require extra efforts to maintain confidentiality. Ultimately, Reseach Ethics Committee members must be knowledgeable about qualitative approaches to be able to assess the potential harms and benefits in a protocol carefully. Without this knowledge gaining ethics approval can be overly difficult for researchers and the best practices for protecting human participants can be overlooked.

The future of pharmacy practice research - Perspectives of academics and practitioners from Australia, NZ, United Kingdom, Canada and USA.

PubMed

Babar, Zaheer-Ud-Din; Scahill, Shane; Nagaria, Raveena Amee; Curley, Louise E

2018-01-11

Healthcare is under significant pressure with the explosion of long term conditions, shift in worldwide demographics and is evolving through advances in technology. Aligned with this is the changing role of pharmacy from the traditional dispenser of medicines to having (in addition) a more advanced clinical role. This study aimed to understand what the pharmacy practice research agenda might look like from the viewpoint of pharmacy academics and practitioners across five high-income countries. Qualitative methods were used, and thirty one-hour interviews were undertaken with practitioners and academics from five economically advanced countries. These nations have comparable socio-economic status but differing health systems and include; Australia, Canada, New Zealand, United Kingdom and United States of America. Six key informants were chosen from each country, three academics and three community pharmacists. A general inductive analysis was undertaken to analyse the most common and recurring themes. These themes of research were based around current community pharmacy practice issues and the enablers to changing the profession. Specific areas pharmacy practice could be more involved with included long term health conditions. Some community pharmacists also believed that research into the impact of professional standards and policy change would be beneficial. The findings of this research suggest that current pharmacy practice research methods are sufficient, but need to be used more effectively. Participants identified a wide range of issues within community pharmacy practice. Academics largely focused on how research can be utilised in the community and how to implement findings to ensure sustainability of pharmacy practice research. Issues that community pharmacists would like to research are related to the current practice model, such as allocating time to provide patient-focused services in addition to managing a business. Copyright © 2018 Elsevier Inc. All rights reserved.

Data on the interaction between thermal comfort and building control research.

PubMed

Park, June Young; Nagy, Zoltan

2018-04-01

This dataset contains bibliography information regarding thermal comfort and building control research. In addition, the instruction of a data-driven literature survey method guides readers to reproduce their own literature survey on related bibliography datasets. Based on specific search terms, all relevant bibliographic datasets are downloaded. We explain the keyword co-occurrences of historical developments and recent trends, and the citation network which represents the interaction between thermal comfort and building control research. Results and discussions are described in the research article entitled "Comprehensive analysis of the relationship between thermal comfort and building control research - A data-driven literature review" (Park and Nagy, 2018).

The effect of interview method on self-reported sexual behavior and perceptions of community norms in Botswana.

PubMed

Anglewicz, Philip; Gourvenec, Diana; Halldorsdottir, Iris; O'Kane, Cate; Koketso, Obakeng; Gorgens, Marelize; Kasper, Toby

2013-02-01

Since self-reports of sensitive behaviors play an important role in HIV/AIDS research, the accuracy of these measures has often been examined. In this paper we (1) examine the effect of three survey interview methods on self-reported sexual behavior and perceptions of community sexual norms in Botswana, and (2) introduce an interview method to research on self-reported sexual behavior in sub-Saharan Africa. Comparing across these three survey methods (face-to-face, ballot box, and randomized response), we find that ballot box and randomized response surveys both provide higher reports of sensitive behaviors; the results for randomized response are particularly strong. Within these overall patterns, however, there is variation by question type; additionally the effect of interview method differs by sex. We also examine interviewer effects to gain insight into the effectiveness of these interview methods, and our results suggest that caution be used when interpreting the differences between survey methods.

Total lactic acid bacteria, antioxidant activity, and acceptance of synbiotic yoghurt with red ginger extract (Zingiberofficinale var. rubrum)

NASA Astrophysics Data System (ADS)

Larasati, B. A.; Panunggal, B.; Afifah, D. N.; Anjani, G.; Rustanti, N.

2018-02-01

Antioxidant related to oxidative stress can caused the metabolic disorders. A functional food that high in antioxidant can be use as the alternative prevention. The addition of red ginger extract in yoghurt could form a functional food, that high in antioxidant, synbiotic and fiber. The influence of red ginger extract on yoghurt synbiotic against lactic acid bacteria, antioxidant activity and acceptance were analyzed. This was an experimental research with one factor complete randomized design, specifically the addition of red ginger extract 0%; 0,1%; 0,3% and 0,5% into synbiotic yoghurt. Total plate count method used to analyze the lactic acid bacteria, 1-1-diphenyl-2-picrylhydrazyl (DPPH) method for antioxidant activity, and acceptance analyzed with hedonic test. The higher the dose of extract added to synbiotic yoghurt, the antioxidant activity got significantly increased (ρ=0,0001), while the lactic acid bacteria got insignificantly decreased (ρ=0,085). The addition of 0,5% red ginger extract obtained the antioxidant activity of 71% and 4,86 × 1013 CFU/ml on lactic acid bacteria, which the requirement for probiotic on National Standard of Indonesia is >107 CFU/ml. The addition of extract had a significant effect on acceptance (ρ=0,0001) in flavor, color, and texture, but not aroma (ρ=0,266). The optimal product in this research was the yoghurt synbiotic with addition of 0,1% red ginger extract. To summarize, the addition of red ginger extract in synbiotic yoghurt had significant effect on antioxidant activity, flavor, color, and texture, but no significant effect on lactic acid bacteria and aroma.

From path models to commands during additive printing of large-scale architectural designs

NASA Astrophysics Data System (ADS)

Chepchurov, M. S.; Zhukov, E. M.; Yakovlev, E. A.; Matveykin, V. G.

2018-05-01

The article considers the problem of automation of the formation of large complex parts, products and structures, especially for unique or small-batch objects produced by a method of additive technology [1]. Results of scientific research in search for the optimal design of a robotic complex, its modes of operation (work), structure of its control helped to impose the technical requirements on the technological process for manufacturing and design installation of the robotic complex. Research on virtual models of the robotic complexes allowed defining the main directions of design improvements and the main goal (purpose) of testing of the the manufactured prototype: checking the positioning accuracy of the working part.

Addition of fraction in swimming context

NASA Astrophysics Data System (ADS)

Putri, R. I. I.; Gunawan, M. S.; Zulkardi

2017-12-01

This study aimed to produce learning trajectory that can help students in learning fractions by using swimming context. The study involved 37 fourth grade students with different capabilities in Elementary School IBA, South Sumatra, Indonesia. This study used an instructional theory called Indonesian version of Realistic Mathematics Education (PMRI). This research used design research method with three stages: preliminary design, the design experiment, and retrospective analysis. Several techniques used for collecting data including a video recording of students interaction in the group discussion, students’ work, and interviewing the students. To conclude, the swimming context could stimulate students’ informal knowledge about the meaning of fractions in which it can be used in the additional learning either the same denominator or different denominator.

Natural wrapping paper from banana (Musa paradisiaca Linn) peel waste with additive essential oils

NASA Astrophysics Data System (ADS)

Widiastuti Agustina, E. S.; Elfi Susanti, V. H.

2018-05-01

The research aimed to produce natural wrapping paper from banana (Musa Paradisiaca Linn.) peel waste with additive essentials oils. The method used in this research was alkalization. The delignification process is done with the use of NaOH 4% at the temperature of 100°C for 1.5 hours. Additive materials in the form of essential oils are added as a preservative and aroma agent, namely cinnamon oil, lemon oil, clove oil and lime oil respectively 2% and 3%. Chemical and physical properties of the produced papers are tested included water content (dry-oven method SNI ISO 287:2010), pH (SNI ISO 6588-1.2010), grammage (SNI ISO 536:2010) and brightness (SNI ISO 2470:2010). Testing results of each paper were compared with commercial wrapping paper. The result shows that the natural paper from banana peel waste with additive essential oil meets the standard of ISO 6519:2016 about Basic Paper for Laminated Plastic Wrapping Paper within the parameter of pH and water content. The paper produced also meet the standard of ISO 8218:2015 about Food Paper and Cardboard within the grammage parameter (high-grade grammage), except the paper with 2% lemon oil. The paper which is closest to the characteristic of commercial wrapping paper is the paper with the additive of 2% cinnamon oil, with pH of 6.95, the water content of 7.14%, grammage of 347.6 gram/m2 and the brightness level of 24.68%.

Minimum data elements for research reports on CFS.

PubMed

Jason, Leonard A; Unger, Elizabeth R; Dimitrakoff, Jordan D; Fagin, Adam P; Houghton, Michael; Cook, Dane B; Marshall, Gailen D; Klimas, Nancy; Snell, Christopher

2012-03-01

Chronic fatigue syndrome (CFS) is a debilitating condition that has received increasing attention from researchers in the past decade. However, it has become difficult to compare data collected in different laboratories due to the variability in basic information regarding descriptions of sampling methods, patient characteristics, and clinical assessments. The issue of variability in CFS research was recently highlighted at the NIH's 2011 State of the Knowledge of CFS meeting prompting researchers to consider the critical information that should be included in CFS research reports. To address this problem, we present our consensus on the minimum data elements that should be included in all CFS research reports, along with additional elements that are currently being evaluated in specific research studies that show promise as important patient descriptors for subgrouping of CFS. These recommendations are intended to improve the consistency of reported methods and the interpretability of reported results. Adherence to minimum standards and increased reporting consistency will allow for better comparisons among published CFS articles, provide guidance for future research and foster the generation of knowledge that can directly benefit the patient. Copyright © 2012 Elsevier Inc. All rights reserved.

NASA-UVA light aerospace alloy and structures technology program

NASA Technical Reports Server (NTRS)

Gangloff, Richard P.; Haviland, John K.; Herakovich, Carl T.; Pilkey, Walter D.; Pindera, Marek-Jerzy; Thornton, Earl A.; Stoner, Glenn E.; Swanson, Robert E.; Wawner, Franklin E., Jr.; Wert, John A.

1989-01-01

The report on progress achieved in accomplishing of the NASA-UVA Light Aerospace Alloy and Structures Technology Program is presented. The objective is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys and associated thermal gradient structures in close collaboration with researchers. The efforts will produce basic understanding of material behavior, new monolithic and composite alloys, processing methods, solid and fluid mechanics analyses, measurement advances, and a pool of educated graduate students. The presented accomplishments include: research on corrosion fatigue of Al-Li-Cu alloy 2090; research on the strengthening effect of small In additions to Al-Li-Cu alloys; research on localized corrosion of Al-Li alloys; research on stress corrosion cracking of Al-Li-Cu alloys; research on fiber-matrix reaction studies (Ti-1100 and Ti-15-3 matrices containing SCS-6, SCS-9, and SCS-10 fibers); and research on methods for quantifying non-random particle distribution in materials that has led to generation of a set of computer programs that can detect and characterize clusters in particles.

Interpretive focus groups: a participatory method for interpreting and extending secondary analysis of qualitative data.

PubMed

Redman-MacLaren, Michelle; Mills, Jane; Tommbe, Rachael

2014-01-01

Participatory approaches to qualitative research practice constantly change in response to evolving research environments. Researchers are increasingly encouraged to undertake secondary analysis of qualitative data, despite epistemological and ethical challenges. Interpretive focus groups can be described as a more participative method for groups to analyse qualitative data. To facilitate interpretive focus groups with women in Papua New Guinea to extend analysis of existing qualitative data and co-create new primary data. The purpose of this was to inform a transformational grounded theory and subsequent health promoting action. A two-step approach was used in a grounded theory study about how women experience male circumcision in Papua New Guinea. Participants analysed portions or 'chunks' of existing qualitative data in story circles and built upon this analysis by using the visual research method of storyboarding. New understandings of the data were evoked when women in interpretive focus groups analysed the data 'chunks'. Interpretive focus groups encouraged women to share their personal experiences about male circumcision. The visual method of storyboarding enabled women to draw pictures to represent their experiences. This provided an additional focus for whole-of-group discussions about the research topic. Interpretive focus groups offer opportunity to enhance trustworthiness of findings when researchers undertake secondary analysis of qualitative data. The co-analysis of existing data and co-generation of new data between research participants and researchers informed an emergent transformational grounded theory and subsequent health promoting action.

Interpretive focus groups: a participatory method for interpreting and extending secondary analysis of qualitative data

PubMed Central

Redman-MacLaren, Michelle; Mills, Jane; Tommbe, Rachael

2014-01-01

Background Participatory approaches to qualitative research practice constantly change in response to evolving research environments. Researchers are increasingly encouraged to undertake secondary analysis of qualitative data, despite epistemological and ethical challenges. Interpretive focus groups can be described as a more participative method for groups to analyse qualitative data. Objective To facilitate interpretive focus groups with women in Papua New Guinea to extend analysis of existing qualitative data and co-create new primary data. The purpose of this was to inform a transformational grounded theory and subsequent health promoting action. Design A two-step approach was used in a grounded theory study about how women experience male circumcision in Papua New Guinea. Participants analysed portions or ‘chunks’ of existing qualitative data in story circles and built upon this analysis by using the visual research method of storyboarding. Results New understandings of the data were evoked when women in interpretive focus groups analysed the data ‘chunks’. Interpretive focus groups encouraged women to share their personal experiences about male circumcision. The visual method of storyboarding enabled women to draw pictures to represent their experiences. This provided an additional focus for whole-of-group discussions about the research topic. Conclusions Interpretive focus groups offer opportunity to enhance trustworthiness of findings when researchers undertake secondary analysis of qualitative data. The co-analysis of existing data and co-generation of new data between research participants and researchers informed an emergent transformational grounded theory and subsequent health promoting action. PMID:25138532

Enhanced method to reconstruct mode shapes of continuous scanning measurements using the Hilbert Huang transform and the modal analysis method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Jongsuh; Hussain, Syed Hassaan; Wang, Semyung, E-mail: smwang@gist.ac.kr

2014-09-15

Generally, it is time consuming to experimentally identify the operating deflection shape or mode shape of a structure. To overcome this problem, the Hilbert Huang transform (HHT) technique has been recently proposed. This technique is used to extract the mode shape from measurements that continuously measure the vibration of a region of interest within a structure using a non-contact laser sensor. In previous research regarding the HHT, two technical processes were needed to obtain the mode shape for each mode. The purpose of this study is to improve and complement our previous research, and for this purpose, a modal analysismore » approach is adapted without using the two technical processes to obtain an accurate un-damped impulse response of each mode for continuous scanning measurements. In addition, frequency response functions for each type of beam are derived, making it possible to make continuously scanned measurements along a straight profile. In this paper, the technical limitations and drawbacks of the damping compensation technique used in previous research are identified. In addition, the separation of resonant frequency (the Doppler effect) that occurs in continuous scanning measurements and the separation of damping phenomenon are also observed. The proposed method is quantitatively verified by comparing it with the results obtained from a conventional approach to estimate the mode shape with an impulse response.« less

A 100-Year Review: Yogurt and other cultured dairy products.

PubMed

Aryana, Kayanush J; Olson, Douglas W

2017-12-01

The history of the last 100 years of the science and technology of yogurt, sour cream, cultured butter, cultured buttermilk, kefir, and acidophilus milk has been one of continuous development and improvement. Yogurt leads the cultured dairy product category in terms of volume of production in the United States and recent research activity. Legal definitions of yogurt, sour cream and acidified sour cream, and cultured milk, including cultured buttermilk, are presented in the United States Code of Federal Regulations and summarized here. A tremendous amount of research has been done on traditional and novel ingredients, starter cultures and probiotics, mix processing, packaging, chemical aspects, physical and sensory properties, microstructure, specialized products, composition, quality and safety of yogurt and various manufacturing methods, addition of flavorings, viscosity measurements, and probiotic use for sour cream. Over time, there have arisen alternative manufacturing methods, flavor problems, addition of flavorings, and use of probiotics for cultured buttermilk. Many health benefits are provided by yogurt and other cultured dairy products. One hundred years of testing and development have led to wider uses of cultured dairy products and new processing methods for enhanced shelf life and safety. Future research directions will likely include investigating the effects of probiotic dairy products on gut microbiota and overall health. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Design of a bioresorbable polymeric scaffold for osteoblast culture

NASA Astrophysics Data System (ADS)

Ditaranto, Vincent M., Jr.

Bioresorbable polymeric scaffolds were designed for the purpose of growing rat osteosarcoma cells (ROS 17/2.8) using the compression molding method. The material used in the construction of the scaffolds was a mixture of polycaprolactone (PCL), Hydroxyapatite (HA), Glycerin (GL) and salt (NaCl) for porosity. The concentration of the several materials utilized, was determined by volume. Past research at the University of Massachusetts Lowell (UML) has successfully utilized the compression molding method for the construction of scaffolds, but was unable to accomplish the goal of long term cell survival and complete cellular proliferation throughout a three dimensional scaffold. This research investigated various concentrations of the materials and molding temperatures used for the manufacture of scaffolds in order to improve the scaffold design and address those issues. The design of the scaffold using the compression molding process is detailed in the Method and Materials section of this thesis. The porogen (salt) used for porosity was suspected as a possible source of contamination causing cell apoptosis in past studies. This research addressed the issues for cell survival and proliferation throughout a three dimensional scaffold. The leaching of the salt was one major design modification. This research successfully used ultrasonic leaching in addition to the passive method. Prior to cell culture, the scaffolds were irradiated to 2.75 Mrad, with cobalt-60 gamma radionuclide. The tissue culture consisted of two trials: (1) cell culture in scaffolds cleaned with passive leaching; (2) cell culture with scaffolds cleaned with ultrasonic leaching. Cell survival and proliferation was accomplished only with the addition of ultrasonic leaching of the scaffolds. Analysis of the scaffolds included Scanning Electron Microscopy (SEM), Nikon light microscopy and x-ray mapping of the calcium, sodium and chloride ion distribution. The cells were analyzed by Environmental Scanning Electron Microscopy (ESEM) and Nikon light microscopy. The high magnification of ESEM up to 60,000 x revealed an unexpected discovery. The osteoblasts appeared to be remodeling the PCL scaffold shown in the last two figures of this research.

Enhancing the quality of case studies in health services research.

PubMed Central

Yin, R K

1999-01-01

OBJECTIVE: To provide guidance on improving the quality of case studies in health services research. DATA SOURCES: Secondary data, drawing from previous case study research. RESEARCH DESIGN: Guidance is provided to two audiences: potential case study investigators (eight items) and reviewers of case study proposals (four additional items). PRINCIPAL FINDINGS: The guidance demonstrates that many operational steps can be undertaken to improve the quality of case studies. These steps have been a hallmark of high-quality case studies in related fields but have not necessarily been practiced in health services research. CONCLUSIONS: Given higher-quality case studies, the case study method can become a valuable tool for health services research. Images Figure 3 PMID:10591280

Cost estimation: An expert-opinion approach. [cost analysis of research projects using the Delphi method (forecasting)

NASA Technical Reports Server (NTRS)

Buffalano, C.; Fogleman, S.; Gielecki, M.

1976-01-01

A methodology is outlined which can be used to estimate the costs of research and development projects. The approach uses the Delphi technique a method developed by the Rand Corporation for systematically eliciting and evaluating group judgments in an objective manner. The use of the Delphi allows for the integration of expert opinion into the cost-estimating process in a consistent and rigorous fashion. This approach can also signal potential cost-problem areas. This result can be a useful tool in planning additional cost analysis or in estimating contingency funds. A Monte Carlo approach is also examined.

Patterns and biases in climate change research on amphibians and reptiles: a systematic review.

PubMed

Winter, Maiken; Fiedler, Wolfgang; Hochachka, Wesley M; Koehncke, Arnulf; Meiri, Shai; De la Riva, Ignacio

2016-09-01

Climate change probably has severe impacts on animal populations, but demonstrating a causal link can be difficult because of potential influences by additional factors. Assessing global impacts of climate change effects may also be hampered by narrow taxonomic and geographical research foci. We review studies on the effects of climate change on populations of amphibians and reptiles to assess climate change effects and potential biases associated with the body of work that has been conducted within the last decade. We use data from 104 studies regarding the effect of climate on 313 species, from 464 species-study combinations. Climate change effects were reported in 65% of studies. Climate change was identified as causing population declines or range restrictions in half of the cases. The probability of identifying an effect of climate change varied among regions, taxa and research methods. Climatic effects were equally prevalent in studies exclusively investigating climate factors (more than 50% of studies) and in studies including additional factors, thus bolstering confidence in the results of studies exclusively examining effects of climate change. Our analyses reveal biases with respect to geography, taxonomy and research question, making global conclusions impossible. Additional research should focus on under-represented regions, taxa and questions. Conservation and climate policy should consider the documented harm climate change causes reptiles and amphibians.

SLDAssay: A software package and web tool for analyzing limiting dilution assays.

PubMed

Trumble, Ilana M; Allmon, Andrew G; Archin, Nancie M; Rigdon, Joseph; Francis, Owen; Baldoni, Pedro L; Hudgens, Michael G

2017-11-01

Serial limiting dilution (SLD) assays are used in many areas of infectious disease related research. This paper presents SLDAssay, a free and publicly available R software package and web tool for analyzing data from SLD assays. SLDAssay computes the maximum likelihood estimate (MLE) for the concentration of target cells, with corresponding exact and asymptotic confidence intervals. Exact and asymptotic goodness of fit p-values, and a bias-corrected (BC) MLE are also provided. No other publicly available software currently implements the BC MLE or the exact methods. For validation of SLDAssay, results from Myers et al. (1994) are replicated. Simulations demonstrate the BC MLE is less biased than the MLE. Additionally, simulations demonstrate that exact methods tend to give better confidence interval coverage and goodness-of-fit tests with lower type I error than the asymptotic methods. Additional advantages of using exact methods are also discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparing India’s Counterinsurgency Approaches in Sri Lanka and Against the Naxalites

DTIC Science & Technology

2015-05-21

141. 130 Stephen Van Evera, Guide to Methods for Students of Political Science (Ithaca: Cornell University Press, 1997), 56. 24 Additionally...for Students and Researchers (Chicago Guides to Writing, Editing, and Publishing). 8th ed. Chicago: University Of Chicago Press, 2013. Van Evera...Stephen. Guide to Methods for Students of Political Science. Ithaca: Cornell University Press, 1997. Werake, Mahinda, and P.V.J. Jayasekera, eds

SOCIAL-ECOLOGICAL RESILIENCE AND ADAPTATION ON THE EASTERN SHORE OF THE CHESAPEAKE BAY

EPA Science Inventory

It is expected that this research will yield methods for operationalizing and assessing the presence of factors of resilience in social-ecological systems, as well as further understanding on the relationship between vulnerability, adaptation and resilience. In addition, it...

Division File of Extension Research Materials; Additions During 1968.

ERIC Educational Resources Information Center

Byrn, Darcie, Comp.

In this annotated bibliography of acquisitions during 1968 appear 265 Extension studies on administrative organization and management; training and staff development; mobilizing participation in Extension work; local leadership; program content and planning procedures; general effectiveness and progress in Extension; teaching methods, techniques,…

Sensor-Based Optimization Model for Air Quality Improvement in Home IoT

PubMed Central

Kim, Jonghyuk

2018-01-01

We introduce current home Internet of Things (IoT) technology and present research on its various forms and applications in real life. In addition, we describe IoT marketing strategies as well as specific modeling techniques for improving air quality, a key home IoT service. To this end, we summarize the latest research on sensor-based home IoT, studies on indoor air quality, and technical studies on random data generation. In addition, we develop an air quality improvement model that can be readily applied to the market by acquiring initial analytical data and building infrastructures using spectrum/density analysis and the natural cubic spline method. Accordingly, we generate related data based on user behavioral values. We integrate the logic into the existing home IoT system to enable users to easily access the system through the Web or mobile applications. We expect that the present introduction of a practical marketing application method will contribute to enhancing the expansion of the home IoT market. PMID:29570684

Sensor-Based Optimization Model for Air Quality Improvement in Home IoT.

PubMed

Kim, Jonghyuk; Hwangbo, Hyunwoo

2018-03-23

We introduce current home Internet of Things (IoT) technology and present research on its various forms and applications in real life. In addition, we describe IoT marketing strategies as well as specific modeling techniques for improving air quality, a key home IoT service. To this end, we summarize the latest research on sensor-based home IoT, studies on indoor air quality, and technical studies on random data generation. In addition, we develop an air quality improvement model that can be readily applied to the market by acquiring initial analytical data and building infrastructures using spectrum/density analysis and the natural cubic spline method. Accordingly, we generate related data based on user behavioral values. We integrate the logic into the existing home IoT system to enable users to easily access the system through the Web or mobile applications. We expect that the present introduction of a practical marketing application method will contribute to enhancing the expansion of the home IoT market.

Evaluation of airborne lidar data to predict vegetation Presence/Absence

USGS Publications Warehouse

Palaseanu-Lovejoy, M.; Nayegandhi, A.; Brock, J.; Woodman, R.; Wright, C.W.

2009-01-01

This study evaluates the capabilities of the Experimental Advanced Airborne Research Lidar (EAARL) in delineating vegetation assemblages in Jean Lafitte National Park, Louisiana. Five-meter-resolution grids of bare earth, canopy height, canopy-reflection ratio, and height of median energy were derived from EAARL data acquired in September 2006. Ground-truth data were collected along transects to assess species composition, canopy cover, and ground cover. To decide which model is more accurate, comparisons of general linear models and generalized additive models were conducted using conventional evaluation methods (i.e., sensitivity, specificity, Kappa statistics, and area under the curve) and two new indexes, net reclassification improvement and integrated discrimination improvement. Generalized additive models were superior to general linear models in modeling presence/absence in training vegetation categories, but no statistically significant differences between the two models were achieved in determining the classification accuracy at validation locations using conventional evaluation methods, although statistically significant improvements in net reclassifications were observed. ?? 2009 Coastal Education and Research Foundation.

Current Options for Determining Fracture Union

PubMed Central

2014-01-01

Determining whether a bone fracture is healed is one of the most important and fundamental clinical determinations made in orthopaedics. However, there are currently no standardized methods of assessing fracture union, which in turn has created significant disagreement among orthopaedic surgeons in both clinical and research settings. An extensive amount of research has been dedicated to finding novel and reliable ways of determining healing with some promising results. Recent advancements in imaging techniques and introduction of new radiographic scores have helped decrease the amount of disagreement on this topic among physicians. The knowledge gained from biomechanical studies of bone healing has helped us refine our tools and create more efficient and practical research instruments. Additionally, a deeper understanding of the molecular pathways involved in the bone healing process has led to emergence of serologic markers as possible candidates in assessment of fracture union. In addition to our current physician centered methods, patient-centered approaches assessing quality of life and function are gaining popularity in assessment of fracture union. Despite these advances, assessment of union remains an imperfect practice in the clinical setting. Therefore, clinicians need to draw on multiple modalities that directly and indirectly measure or correlate with bone healing when counseling patients. PMID:26556422

An interdisciplinary learning experience in neuro-optics.

PubMed

Anselmi, Francesca; Bertherat, Julien; Estebanez, Luc; van 't Hoff, Marcel; Zylbersztejn, Kathleen

2012-01-01

How can a Ph.D. student initially trained as a biologist take part in the development of a multineuronal recording method that requires cross interaction between physics, neurobiology and mathematics? Beyond student training in the laboratory, interdisciplinary research calls for a new style of academic training of young researchers. Here we present an innovative approach to graduate student academic training that fills the need for multidisciplinary knowledge and provides students, in addition, with a deeper understanding of the interdisciplinary approach to scientific research. Copyright © 2012 Elsevier Ltd. All rights reserved.

Quantifying complexity in translational research: an integrated approach

PubMed Central

Munoz, David A.; Nembhard, Harriet Black; Kraschnewski, Jennifer L.

2014-01-01

Purpose This article quantifies complexity in translational research. The impact of major operational steps and technical requirements (TR) is calculated with respect to their ability to accelerate moving new discoveries into clinical practice. Design/Methodology/Approach A three-phase integrated Quality Function Deployment (QFD) and Analytic Hierarchy Process (AHP) method was used to quantify complexity in translational research. A case study in obesity was used to usability. Findings Generally, the evidence generated was valuable for understanding various components in translational research. Particularly, we found that collaboration networks, multidisciplinary team capacity and community engagement are crucial for translating new discoveries into practice. Research limitations/implications As the method is mainly based on subjective opinion, some argue that the results may be biased. However, a consistency ratio is calculated and used as a guide to subjectivity. Alternatively, a larger sample may be incorporated to reduce bias. Practical implications The integrated QFD-AHP framework provides evidence that could be helpful to generate agreement, develop guidelines, allocate resources wisely, identify benchmarks and enhance collaboration among similar projects. Originality/value Current conceptual models in translational research provide little or no clue to assess complexity. The proposed method aimed to fill this gap. Additionally, the literature review includes various features that have not been explored in translational research. PMID:25417380

Methods for artifact detection and removal from scalp EEG: A review.

PubMed

Islam, Md Kafiul; Rastegarnia, Amir; Yang, Zhi

2016-11-01

Electroencephalography (EEG) is the most popular brain activity recording technique used in wide range of applications. One of the commonly faced problems in EEG recordings is the presence of artifacts that come from sources other than brain and contaminate the acquired signals significantly. Therefore, much research over the past 15 years has focused on identifying ways for handling such artifacts in the preprocessing stage. However, this is still an active area of research as no single existing artifact detection/removal method is complete or universal. This article presents an extensive review of the existing state-of-the-art artifact detection and removal methods from scalp EEG for all potential EEG-based applications and analyses the pros and cons of each method. First, a general overview of the different artifact types that are found in scalp EEG and their effect on particular applications are presented. In addition, the methods are compared based on their ability to remove certain types of artifacts and their suitability in relevant applications (only functional comparison is provided not performance evaluation of methods). Finally, the future direction and expected challenges of current research is discussed. Therefore, this review is expected to be helpful for interested researchers who will develop and/or apply artifact handling algorithm/technique in future for their applications as well as for those willing to improve the existing algorithms or propose a new solution in this particular area of research. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Academia Meets Industry.

PubMed

Schäfer, Christian; Paprotka, Tobias; Heitzer, Ellen; Eccleston, Mark; Noe, Johannes; Holdenrieder, Stefan; Diehl, Frank; Thierry, Alain

2016-01-01

Researchers working in industrial laboratories as well as in academic laboratories discussed topics related to the use of extracellular nucleic acids in different fields. These included areas like non-invasive prenatal diagnosis, the application of different methods for the analysis and characterization of patients with benign and malignant diseases and technical aspects associated with extracellular nucleic acids. In addition, the possibilities and chances for a cooperation of researchers working in different worlds, i.e. academia and industry, were discussed.

Photodetector timing research at Fermilab

DOE PAGES

Ramberg, E.; Ronzhin, A.; Albrow, M.; ...

2011-01-01

We describe here the outlines of research undertaken by Fermilab into timing characteristics of photodetectors. We describe our experimental method and give benchtop results on the timing resolution of micro-channel plate photomultipliers (MCP-PMT) and silicon photomultipliers (SiPM). In addition, we describe results of various configurations of these detectors, along with quartz radiators, in particle test beams at Fermilab. Results for timing of scintillator light using the DRS4 high speed digitizer are also presented.

Research of ceramic matrix for a safe immobilization of radioactive sludge waste

NASA Astrophysics Data System (ADS)

Dorofeeva, Ludmila; Orekhov, Dmitry

2018-03-01

The research and improvement of the existing method for radioactive waste hardening by fixation in a ceramic matrix was carried out. For the samples covered with the sodium silicate and tested after the storage on the air the speed of a radionuclides leaching was determined. The properties of a clay ceramics and the optimum conditions of sintering were defined. The experimental data about the influence of a temperature mode sintering, water quantities, sludge and additives in the samples on their mechanical durability and a water resistance were obtained. The comparative analysis of the conducted research is aimed at improvement of the existing method of the hardening radioactive waste by inclusion in a ceramic matrix and reveals the advantages of the received results over analogs.

GIS Application Management for Disabled People

NASA Astrophysics Data System (ADS)

Tongkaw, Sasalak

2017-08-01

This research aimed to develop and design Geographical Information Systems (GIS) for facilitating disabled people by presenting some useful disabled information on the Google Map. The map could provide information about disabled types of people such as blind, deaf and physical movement. This research employed the Multiview 2 theory and method to plan and find out the problems in real world situation. This research used many designing data structure methods such as Data Flow Diagram, and ER-Diagram. The research focused into two parts: server site and client site which included the interface for Web-based application. The clear information of disable people on the map was useful for facilitating disabled people to find some useful information. In addition, it provided specialized data for company and government officers for managing and planning local facilities for disabled people in the cities. The disable could access the system through the Internet access at any time by using mobile or portable devices.

Zebrafish neurobehavioral phenomics for aquatic neuropharmacology and toxicology research.

PubMed

Kalueff, Allan V; Echevarria, David J; Homechaudhuri, Sumit; Stewart, Adam Michael; Collier, Adam D; Kaluyeva, Aleksandra A; Li, Shaomin; Liu, Yingcong; Chen, Peirong; Wang, JiaJia; Yang, Lei; Mitra, Anisa; Pal, Subharthi; Chaudhuri, Adwitiya; Roy, Anwesha; Biswas, Missidona; Roy, Dola; Podder, Anupam; Poudel, Manoj K; Katare, Deepshikha P; Mani, Ruchi J; Kyzar, Evan J; Gaikwad, Siddharth; Nguyen, Michael; Song, Cai

2016-01-01

Zebrafish (Danio rerio) are rapidly emerging as an important model organism for aquatic neuropharmacology and toxicology research. The behavioral/phenotypic complexity of zebrafish allows for thorough dissection of complex human brain disorders and drug-evoked pathological states. As numerous zebrafish models become available with a wide spectrum of behavioral, genetic, and environmental methods to test novel drugs, here we discuss recent zebrafish phenomics methods to facilitate drug discovery, particularly in the field of biological psychiatry. Additionally, behavioral, neurological, and endocrine endpoints are becoming increasingly well-characterized in zebrafish, making them an inexpensive, robust and effective model for toxicology research and pharmacological screening. We also discuss zebrafish behavioral phenotypes, experimental considerations, pharmacological candidates and relevance of zebrafish neurophenomics to other 'omics' (e.g., genomic, proteomic) approaches. Finally, we critically evaluate the limitations of utilizing this model organism, and outline future strategies of research in the field of zebrafish phenomics. Copyright © 2015 Elsevier B.V. All rights reserved.

In vivo optical imaging and dynamic contrast methods for biomedical research

PubMed Central

Hillman, Elizabeth M. C.; Amoozegar, Cyrus B.; Wang, Tracy; McCaslin, Addason F. H.; Bouchard, Matthew B.; Mansfield, James; Levenson, Richard M.

2011-01-01

This paper provides an overview of optical imaging methods commonly applied to basic research applications. Optical imaging is well suited for non-clinical use, since it can exploit an enormous range of endogenous and exogenous forms of contrast that provide information about the structure and function of tissues ranging from single cells to entire organisms. An additional benefit of optical imaging that is often under-exploited is its ability to acquire data at high speeds; a feature that enables it to not only observe static distributions of contrast, but to probe and characterize dynamic events related to physiology, disease progression and acute interventions in real time. The benefits and limitations of in vivo optical imaging for biomedical research applications are described, followed by a perspective on future applications of optical imaging for basic research centred on a recently introduced real-time imaging technique called dynamic contrast-enhanced small animal molecular imaging (DyCE). PMID:22006910

Promoting a structural view of biology for varied audiences: an overview of RCSB PDB resources and experiences.

PubMed

Dutta, Shuchismita; Zardecki, Christine; Goodsell, David S; Berman, Helen M

2010-10-01

The Research Collaboratory for Structural Bioinformatics Protein Data Bank (RCSB PDB) supports scientific research and education worldwide by providing an essential resource of information on biomolecular structures. In addition to serving as a deposition, data-processing and distribution center for PDB data, the RCSB PDB offers resources and online materials that different audiences can use to customize their structural biology instruction. These include resources for general audiences that present macromolecular structure in the context of a biological theme, method-based materials for researchers who take a more traditional approach to the presentation of structural science, and materials that mix theme-based and method-based approaches for educators and students. Through these efforts the RCSB PDB aims to enable optimal use of structural data by researchers, educators and students designing and understanding experiments in biology, chemistry and medicine, and by general users making informed decisions about their life and health.

Bioelectrical impedance methods in clinical research: a follow-up to the NIH Technology Assessment Conference.

PubMed

Ellis, K J; Bell, S J; Chertow, G M; Chumlea, W C; Knox, T A; Kotler, D P; Lukaski, H C; Schoeller, D A

1999-01-01

In 1994, the National Institutes of Health (NIH) convened a Technology Assessment Conference "to provide physicians with a responsible assessment of bioelectrical impedance analysis (BIA) technology for body composition measurement." In 1997, Serono Symposia USA, Inc., organized an invited panel of scientists and clinicians, with extensive research and clinical experience with BIA, to provide an update. Panel members presented reviews based on their own work and published studies for the intervening years. Updates were provided on the single and multifrequency BIA methods and models; continued clinical research experiences; efforts toward establishing population reference norms; and the feasibility of establishing guidelines for potential diagnostic use of BIA in a clinical setting. This report provides a summary of the panel's findings including a consensus on several technical and clinical issues related to the research use of BIA, and those areas that are still in need of additional study.

[Assessment of innovations in clinical research: strengths and potentials for improvement of research in Germany].

PubMed

Vollmar, Horst Christian; Georgieff, Peter; Bührlen, Bernhard

2010-01-01

Clinical research is a central link in the development chain of new treatment methods; scientifically, it belongs between basic science and health services research. It spans from the first application of a new substance or device in humans to the main proofs of its efficacy and safety. Economically speaking, it absorbs almost half of the total expenditures for the research and development of a new drug and represents a significant factor in the labour market for researchers and study personnel. Also, through participation in clinical trials, patients gain early access to new treatment methods, while on the other hand they are placed at higher risk for undesired side effects. Politics have taken significant steps to strengthen clinical research, but the pharmaceutical industry continues to complain about competitive disadvantages. Despite internationally recognised and, to a large extent, legally codified guidelines there are still significant national differences in implementation. In addition, traditional practices in clinical research are challenged by novel, mainly biotechnological therapeutic methods for which our current knowledge base is rather limited and which therefore entail a higher risk for patients or trial participants. The following paper summarises a report for the Office of Technology Assessment at the German Federal Parliament (TAB). Based on current regulations, scientific literature and expert interviews, current challenges and solution strategies for clinical research will be analysed in terms of an international comparison.

Publications on dementia in Medline 1974-2009: a quantitative bibliometric study.

PubMed

Theander, Sten S; Gustafson, Lars

2013-05-01

The aim is to describe the development of the scientific literature on dementia. We present a quantitative, bibliometric study of the literature on dementia, based on Medline, covering 36 years (1974-2009). Two samples of references to dementia papers were retrieved: The main sample based on the MeSH term Dementia holds more than 88,500 references. We have compared the annual additions of references on dementia with the addition to total Medline. Changes of 'the Dementia to Medline ratio' (%) give the best information on the development. Publications on dementia increased 5.6 times faster than Medline. Most of this relative acceleration took place during 1980-1997, when the references on dementia increased from 0.17 to 0.78%. During the recent 12 years, the publications on dementia have been keeping pace with Medline and have stabilized around 0.8%. We have shown a large increase of the literature on dementia, relative both to the development of all medical research and to all psychiatric research. The bibliometric approach may be questioned as quantitative methods treat articles as being of equal value, what is not true. If, for example, during a certain period, the research output is 'inflated' by a great number of repetitive papers, the quantitative method will give an unfair picture of the development. Our relative method, however, will give relevant results as, at each point of time, the proportion of 'valuable research' ought to be about the same in the dementia group as in total Medline. Copyright © 2012 John Wiley & Sons, Ltd.

The convergence of personality disorder diagnoses across different methods among monolingual (Spanish-speaking only) Hispanic patients in substance use treatment.

PubMed

Samuel, Douglas B; Añez, Luis M; Paris, Manuel; Grilo, Carlos M

2014-04-01

Methods for diagnosing personality disorders (PDs) within clinical settings typically diverge from those used in treatment research. Treatment groups in research studies are routinely diagnosed using semistructured interviews or self-report questionnaires, yet these methods show poor agreement with clinical diagnoses recorded in medical charts or assigned by treating clinicians, reducing the potential for evidence-based practice. Furthermore, existing research has been limited by focusing on primarily White and English-speaking participants. Our study extended prior research by comparing 4 independent methods of PD diagnosis, including self-report questionnaire, semistructured interview, chart diagnoses, and ratings by treating clinicians, within a clinical series of 130 monolingual (Spanish only) Hispanic persons (69% male; M age 37.4), in treatment for substance use. The authors examined the convergence of the Diagnostic and Statistical Manual of Mental Disorders (4th ed.; DSM-IV) PD diagnoses across these methods. PD diagnoses appeared infrequently within medical charts but were diagnosed at higher levels by independent treating clinicians, self-report questionnaires, and semistructured interviews. Nonetheless, diagnostic concordance between clinical diagnoses and the other methods were poor (κ < .20). Convergence of PD diagnoses across diagnostic methods for Spanish-speaking Hispanic persons are comparable to other groups allaying concerns about cross-cultural application of PD diagnoses. Additionally, the results of this study echo previous research in suggesting that clinicians' PD diagnoses overlap little with self-report questionnaires or semistructured diagnostic interviews and suggest that PDs are underdiagnosed using standard diagnostic approaches. Implications for the clinical application of empirically supported research are discussed. PsycINFO Database Record (c) 2014 APA, all rights reserved

CB4-03: An Eye on the Future: A Review of Data Virtualization Techniques to Improve Research Analytics

PubMed Central

Richter, Jack; McFarland, Lela; Bredfeldt, Christine

2012-01-01

Background/Aims Integrating data across systems can be a daunting process. The traditional method of moving data to a common location, mapping fields with different formats and meanings, and performing data cleaning activities to ensure valid and reliable integration across systems can be both expensive and extremely time consuming. As the scope of needed research data increases, the traditional methodology may not be sustainable. Data Virtualization provides an alternative to traditional methods that may reduce the effort required to integrate data across disparate systems. Objective Our goal was to survey new methods in data integration, cloud computing, enterprise data management and virtual data management for opportunities to increase the efficiency of producing VDW and similar data sets. Methods Kaiser Permanente Information Technology (KPIT), in collaboration with the Mid-Atlantic Permanente Research Institute (MAPRI) reviewed methodologies in the burgeoning field of Data Virtualization. We identified potential strengths and weaknesses of new approaches to data integration. For each method, we evaluated its potential application for producing effective research data sets. Results Data Virtualization provides opportunities to reduce the amount of data movement required to integrate data sources on different platforms in order to produce research data sets. Additionally, Data Virtualization also includes methods for managing “fuzzy” matching used to match fields known to have poor reliability such as names, addresses and social security numbers. These methods could improve the efficiency of integrating state and federal data such as patient race, death, and tumors with internal electronic health record data. Discussion The emerging field of Data Virtualization has considerable potential for increasing the efficiency of producing research data sets. An important next step will be to develop a proof of concept project that will help us understand to benefits and drawbacks of these techniques.

Using Fitness Trackers and Smartwatches to Measure Physical Activity in Research: Analysis of Consumer Wrist-Worn Wearables

PubMed Central

Haugen Mikalsen, Martin; Woldaregay, Ashenafi Zebene; Muzny, Miroslav; Hartvigsen, Gunnar; Hopstock, Laila Arnesdatter; Grimsgaard, Sameline

2018-01-01

Background New fitness trackers and smartwatches are released to the consumer market every year. These devices are equipped with different sensors, algorithms, and accompanying mobile apps. With recent advances in mobile sensor technology, privately collected physical activity data can be used as an addition to existing methods for health data collection in research. Furthermore, data collected from these devices have possible applications in patient diagnostics and treatment. With an increasing number of diverse brands, there is a need for an overview of device sensor support, as well as device applicability in research projects. Objective The objective of this study was to examine the availability of wrist-worn fitness wearables and analyze availability of relevant fitness sensors from 2011 to 2017. Furthermore, the study was designed to assess brand usage in research projects, compare common brands in terms of developer access to collected health data, and features to consider when deciding which brand to use in future research. Methods We searched for devices and brand names in six wearable device databases. For each brand, we identified additional devices on official brand websites. The search was limited to wrist-worn fitness wearables with accelerometers, for which we mapped brand, release year, and supported sensors relevant for fitness tracking. In addition, we conducted a Medical Literature Analysis and Retrieval System Online (MEDLINE) and ClinicalTrials search to determine brand usage in research projects. Finally, we investigated developer accessibility to the health data collected by identified brands. Results We identified 423 unique devices from 132 different brands. Forty-seven percent of brands released only one device. Introduction of new brands peaked in 2014, and the highest number of new devices was introduced in 2015. Sensor support increased every year, and in addition to the accelerometer, a photoplethysmograph, for estimating heart rate, was the most common sensor. Out of the brands currently available, the five most often used in research projects are Fitbit, Garmin, Misfit, Apple, and Polar. Fitbit is used in twice as many validation studies as any other brands and is registered in ClinicalTrials studies 10 times as often as other brands. Conclusions The wearable landscape is in constant change. New devices and brands are released every year, promising improved measurements and user experience. At the same time, other brands disappear from the consumer market for various reasons. Advances in device quality offer new opportunities for research. However, only a few well-established brands are frequently used in research projects, and even less are thoroughly validated. PMID:29567635

The role of veterinary research laboratories in the provision of veterinary services.

PubMed

Verwoerd, D W

1998-08-01

Veterinary research laboratories play an essential role in the provision of veterinary services in most countries. These laboratories are the source of new knowledge, innovative ideas and improved technology for the surveillance, prevention and control of animal diseases. In addition, many laboratories provide diagnostic and other services. To ensure the optimal integration of various veterinary activities, administrators must understand the functions and constraints of research laboratories. Therefore, a brief discussion is presented of the following: organisational structures methods for developing research programmes outputs of research scientists and how these are measured the management of quality assurance funding of research. Optimal collaboration can only be attained by understanding the environment in which a research scientist functions and the motivational issues at stake.

Behavioral and Social Sciences at the National Institutes of Health: adoption of research findings in health research and practice as a scientific priority.

PubMed

Riley, William T

2017-06-01

The National Institutes of Health's Office of Behavioral and Social Sciences Research (OBSSR) recently released its Strategic Plan for 2017 to 2021. This plan highlights three scientific priorities: (1) improve the synergy of basic and applied behavioral and social sciences research, (2) enhance and promote the research infrastructure, methods, and measures needed to support a more cumulative and integrated approach to behavioral and social sciences research, and (3) facilitate the adoption of behavioral and social sciences research findings in health research and in practice. This commentary focuses on the challenges and opportunities to facilitate the adoption of research findings in health research and in practice. In addition to the ongoing NIH support for dissemination and implementation (D&I) research, we must address transformative challenges and opportunities such as better disseminating and implementing D&I research, merging research and practice, adopting more rigorous and diverse methods and measures for both D&I and clinical trials research, evaluating technological-based delivery of interventions, and transitioning from minimally adaptable intervention packages to planned adaptations rooted in behavior change principles. Beyond translation into practice and policy, the OBSSR Strategic Plan also highlights the need for translation of behavioral and social science findings into the broader biomedical research enterprise.

A research agenda on patient safety in primary care. Recommendations by the LINNEAUS collaboration on patient safety in primary care.

PubMed

Verstappen, Wim; Gaal, Sander; Bowie, Paul; Parker, Diane; Lainer, Miriam; Valderas, Jose M; Wensing, Michel; Esmail, Aneez

2015-09-01

Healthcare can cause avoidable serious harm to patients. Primary care is not an exception, and the relative lack of research in this area lends urgency to a better understanding of patient safety, the future research agenda and the development of primary care oriented safety programmes. To outline a research agenda for patient safety improvement in primary care in Europe and beyond. The LINNEAUS collaboration partners analysed existing research on epidemiology and classification of errors, diagnostic and medication errors, safety culture, and learning for and improving patient safety. We discussed ideas for future research in several meetings, workshops and congresses with LINNEAUS collaboration partners, practising GPs, researchers in this field, and policy makers. This paper summarizes and integrates the outcomes of the LINNEAUS collaboration on patient safety in primary care. It proposes a research agenda on improvement strategies for patient safety in primary care. In addition, it provides background information to help to connect research in this field with practicing GPs and other healthcare workers in primary care. Future research studies should target specific primary care domains, using prospective methods and innovative methods such as patient involvement.

Landslide and Land Subsidence Hazards to Pipelines

USGS Publications Warehouse

Baum, Rex L.; Galloway, Devin L.; Harp, Edwin L.

2008-01-01

Landslides and land subsidence pose serious hazards to pipelines throughout the world. Many existing pipeline corridors and more and more new pipelines cross terrain that is affected by either landslides, land subsidence, or both. Consequently the pipeline industry recognizes a need for increased awareness of methods for identifying and evaluating landslide and subsidence hazard for pipeline corridors. This report was prepared in cooperation with the U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration, and Pipeline Research Council International through a cooperative research and development agreement (CRADA) with DGH Consulting, Inc., to address the need for up-to-date information about current methods to identify and assess these hazards. Chapters in this report (1) describe methods for evaluating landslide hazard on a regional basis, (2) describe the various types of land subsidence hazard in the United States and available methods for identifying and quantifying subsidence, and (3) summarize current methods for investigating individual landslides. In addition to the descriptions, this report provides information about the relative costs, limitations and reliability of various methods.

“I see it now”: Using photo elicitation to understand chronic illness self-management

PubMed Central

Fritz, Heather; Lysack, Cathy

2018-01-01

Background How people integrate self-management into daily life remains underexamined, and such processes are difficult to elicit through traditional approaches used to understand human occupation. Purpose This paper will provide a brief overview of one visual research method, photo elicitation, that holds promise for studying self-management of health behaviours and will present findings from an analysis of how the use of photo elicitation interviews contributed additional insights into self-management beyond those generated from the data collected through the other methods used in the study. Method A qualitative, multiple-methods, multiple-case study was conducted with a purposive sample of 10 low-income women ages 40 to 64 with type 2 diabetes. Findings The photo elicitation interviews contributed insights beyond those generated from other study methods about how individuals viewed their self-management behaviours and how occupations changed across time. Implications Photo elicitation is a valuable research method for better understanding clients' chronic illness self-management practices. PMID:29898501

Implementation of small group discussion as a teaching method in earth and space science subject

NASA Astrophysics Data System (ADS)

Aryani, N. P.; Supriyadi

2018-03-01

In Physics Department Universitas Negeri Semarang, Earth and Space Science subject is included in the curriculum of the third year of physics education students. There are various models of teaching earth and space science subject such as textbook method, lecturer, demonstrations, study tours, problem-solving method, etc. Lectures method is the most commonly used of teaching earth and space science subject. The disadvantage of this method is the lack of two ways interaction between lecturers and students. This research used small group discussion as a teaching method in Earth and Space science. The purpose of this study is to identify the conditions under which an efficient discussion may be initiated and maintained while students are investigating properties of earth and space science subjects. The results of this research show that there is an increase in student’s understanding of earth and space science subject proven through the evaluation results. In addition, during the learning process, student’s activeness also increase.

Hybrid Method for Mobile learning Cooperative: Study of Timor Leste

NASA Astrophysics Data System (ADS)

da Costa Tavares, Ofelia Cizela; Suyoto; Pranowo

2018-02-01

In the modern world today the decision support system is very useful to help in solving a problem, so this study discusses the learning process of savings and loan cooperatives in Timor Leste. The purpose of the observation is that the people of Timor Leste are still in the process of learning the use DSS for good saving and loan cooperative process. Based on existing research on the Timor Leste community on credit cooperatives, a mobile application will be built that will help the cooperative learning process in East Timorese society. The methods used for decision making are AHP (Analytical Hierarchy Process) and SAW (simple additive Weighting) method to see the result of each criterion and the weight of the value. The result of this research is mobile leaning cooperative in decision support system by using SAW and AHP method. Originality Value: Changed the two methods of mobile application development using AHP and SAW methods to help the decision support system process of a savings and credit cooperative in Timor Leste.

Effect of earthworm (Lumbricus rubellus) in feed formulation to improve fatty acids profile in eel (Anguilla bicolor) meat

NASA Astrophysics Data System (ADS)

Farah, K.; Gunawan, I. R.; Putra, G. B.; Agustono; Lokapirnasari, W. P.; Lamid, M.; Masithah, E. D.; Nurhajati, T.; Rozi

2018-04-01

Eel requires unsaturated fatty acids of linolenic acid for growth. Which can be supplied from earthworms. In this study, addition of earthworm in formulation feed aimsed to improve the fatty acid profile eel meat. This research used experimental method and randomized complete design method with five treatments. Each treatment was repeated four times. The use of earthworms in feeding treatment formulation was done for 21 days with different level i.e: 0 % (P0), 25 % (P1), 50 % (P2), 75 % (P3) and 100 % (P4). The result showed that the addition of eartworm significantly influenced the omega 3 contents (EPA & DHA) of eel meat.

Effect of ground control mesh on dust sampling and explosion mitigation.

PubMed

Alexander, D W; Chasko, L L

2015-07-01

Researchers from the National Institute for Occupational Safety and Health's Office of Mine Safety and Health Research conducted an assessment of the effects that ground control mesh might have on rock and float coal dust distribution in a coal mine. The increased use of mesh to control roof and rib spall introduces additional elevated surfaces on which rock or coal dust can collect. It is possible to increase the potential for dust explosion propagation if any float coal dust is not adequately inerted. In addition, the mesh may interfere with the collection of representative dust samples when using the pan-and-brush sampling method developed by the U.S. Bureau of Mines and used by the Mine Safety and Health Administration for band sampling. This study estimates the additional coal or rock dust that could accumulate on mesh and develops a means to collect representative dust samples from meshed entries.

Effect of ground control mesh on dust sampling and explosion mitigation

PubMed Central

Alexander, D.W.; Chasko, L.L.

2017-01-01

Researchers from the National Institute for Occupational Safety and Health’s Office of Mine Safety and Health Research conducted an assessment of the effects that ground control mesh might have on rock and float coal dust distribution in a coal mine. The increased use of mesh to control roof and rib spall introduces additional elevated surfaces on which rock or coal dust can collect. It is possible to increase the potential for dust explosion propagation if any float coal dust is not adequately inerted. In addition, the mesh may interfere with the collection of representative dust samples when using the pan-and-brush sampling method developed by the U.S. Bureau of Mines and used by the Mine Safety and Health Administration for band sampling. This study estimates the additional coal or rock dust that could accumulate on mesh and develops a means to collect representative dust samples from meshed entries. PMID:28936000

Vocational High School Students’ Creativity in Food Additives with Problem Based Learning Approach

NASA Astrophysics Data System (ADS)

Ratnasari, D.; Supriyanti, T.; Rosbiono, M.

2017-09-01

The aim of this study is to verify the creativity of vocational students through Problem Based Learning approach in the food additives. The method which used quasi-experiment with one group posttest design. The research subjects were 32 students in grade XII of a vocational high school students courses chemical analysis in Bandung city. Instrument of creativity were essay, Student Worksheet, and observation sheets. Creativity measured include creative thinking skills and creative act skills. The results showed creative thinking skills and creative act skills are good. Research showed that the problem based learning approach can be applied to develop creativity of vocational students in the food additives well, because the students are given the opportunity to determine their own experiment procedure that will be used. It is recommended to often implement Problem Based Learning approach in other chemical concepts so that students’ creativity is sustainable.

Spatiotemporal Interpolation Methods for Solar Event Trajectories

NASA Astrophysics Data System (ADS)

Filali Boubrahimi, Soukaina; Aydin, Berkay; Schuh, Michael A.; Kempton, Dustin; Angryk, Rafal A.; Ma, Ruizhe

2018-05-01

This paper introduces four spatiotemporal interpolation methods that enrich complex, evolving region trajectories that are reported from a variety of ground-based and space-based solar observatories every day. Our interpolation module takes an existing solar event trajectory as its input and generates an enriched trajectory with any number of additional time–geometry pairs created by the most appropriate method. To this end, we designed four different interpolation techniques: MBR-Interpolation (Minimum Bounding Rectangle Interpolation), CP-Interpolation (Complex Polygon Interpolation), FI-Interpolation (Filament Polygon Interpolation), and Areal-Interpolation, which are presented here in detail. These techniques leverage k-means clustering, centroid shape signature representation, dynamic time warping, linear interpolation, and shape buffering to generate the additional polygons of an enriched trajectory. Using ground-truth objects, interpolation effectiveness is evaluated through a variety of measures based on several important characteristics that include spatial distance, area overlap, and shape (boundary) similarity. To our knowledge, this is the first research effort of this kind that attempts to address the broad problem of spatiotemporal interpolation of solar event trajectories. We conclude with a brief outline of future research directions and opportunities for related work in this area.

Research Priorities for Studies Linking Intake of Low-Calorie Sweeteners and Potentially Related Health Outcomes

PubMed Central

Bright, Oliver-John M; Wang, Ding Ding; Shams-White, Marissa; Bleich, Sara N; Foreyt, John; Franz, Marion; Johnson, Guy; Manning, Beth Trickett; Mattes, Rick; Pi-Sunyer, Xavier; Schneeman, Barbara; Parrott, James Scott; Steffen, Dan; Sylvetsky, Allison; Ziegler, Paula

2017-01-01

Abstract Background: In a world of finite research funding, efforts to prioritize future research topics are increasingly necessary. Objective: The aim of this study was to identify and prioritize the direction of future research in the broad area of low-calorie sweetener (LCS) intake and potentially related health outcomes by using a novel method that incorporates evidence mapping in the Agency for Healthcare Research and Quality's Future Research Needs (FRN) process. Methods: A diverse expert stakeholder panel was convened and engaged to identify research gaps and prioritize future research needs. An independent research team hosted a number of interactive webinars and elicited feedback through surveys and individual interviews with the stakeholder panel, which included policymakers, lay audience members, health providers, a research funder, individuals with food industry experience, and researchers of several different specialties. Results: The stakeholder panel generated and ranked a list of 18 FRN questions across 5 broad research areas. Overall, stakeholder panel members unanimously agreed that the research questions that will have the largest public health impact are those that address outcomes related to body weight, appetite, and dietary intake. Although the LCSs included in this FRN project have all been Generally Recognized as Safe by the FDA or approved as food additives, the recurrent concerns and confusions with regard to the “safety” of LCSs by consumers underscore the importance of communicating the science to the general public. Conclusion: Our project provides evidence that engaging a diverse expert stakeholder panel is an effective method of translating gaps in nutrition research into prioritized areas of future research.

Students' Perceptions and Faculty Measured Competencies in Higher Education

ERIC Educational Resources Information Center

Malechwanzi, J. Muthiani; Lei, Hongde; Wang, Lu

2016-01-01

This study aims to investigate whether there is significant relationship between students' perceived faculty competencies and faculty evaluated competencies. The study identified four main dimensions for measuring faculty competencies namely: teaching, research, additional services and advising. This study adopted a mixed method design. The study…

An Evaluation of Methods for Encoding Multiple, 2D Spatial Data

DTIC Science & Technology

2011-01-01

using ellipsoid glyphs and brush strokes. They showed significant differences between healthy and unhealthy spinal cords in mice . The glyphs were...researcher must take care when choosing the color set. Also, the technique monopolizes the color attribute, making it difficult to overlay additional

Passing the baton: Mentoring for adoption of active-learning pedagogies by research-active junior faculty.

PubMed

Grimes, Catherine Leimkuhler; White, Harold B

2015-01-01

There are barriers to adoption of research-based teaching methods. Professional development workshops may inform faculty of these methods, but effective adoption often does not follow. In addition, newly-minted research-active faculty are often overwhelmed by the many new responsibilities (grant writing, group management, laboratory setup, teaching) that accompany the position and normally do not have the time to consider novel teaching approaches. This case study documents how over a three-year period, the responsibility for teaching a nontraditional "Introduction to Biochemistry" course in a problem-based learning format was successfully transferred from a senior faculty member nearing retirement (HBW) to a newly-hired research-active assistant professor (CLG). We describe our apprenticeship project involving modeling, scaffolding, fading, and coaching. We suggest that involving faculty in active-learning pedagogy early in their career with mentoring by senior faculty overcomes barriers to adopting these methods. This case describes a specific example from which potentially useful elements can be adopted and adapted wherever biochemistry is taught. © 2015 The International Union of Biochemistry and Molecular Biology.

Disseminating Comparative Effectiveness Research Through Community-based Experiential Learning.

PubMed

Hansen, Richard A; Williamson, Margaret; Stevenson, Lynn; Davis, Brandy R; Evans, R Lee

2017-02-25

Objectives. To launch and evaluate a comparative effectiveness research education and dissemination program as part of an introductory pharmacy practice experience (IPPE). Methods. First- through third-year PharmD students received training on comparative effectiveness research and disseminated printed educational materials to patients in the community who they were monitoring longitudinally (n=314). Students completed an assessment and initial visit documentation form at the first visit, and a follow-up assessment and documentation form at a subsequent visit. Results. Twenty-three diabetes patients, 29 acid-reflux patients, 30 osteoarthritis patients, and 50 hypertension patients received materials. Aside from the patient asking questions, which was the most common outcome (n=44), the program resulted in 38 additional actions, which included stopping, starting, or changing treatments or health behaviors, or having additional follow-up or diagnostic testing. Small but positive improvements in patient understanding, confidence, and self-efficacy were observed. Conclusions. Dissemination of comparative effectiveness research materials in an IPPE program demonstrated a positive trend in markers of informed decision-making.

External Standards or Standard Addition? Selecting and Validating a Method of Standardization

NASA Astrophysics Data System (ADS)

Harvey, David T.

2002-05-01

A common feature of many problem-based laboratories in analytical chemistry is a lengthy independent project involving the analysis of "real-world" samples. Students research the literature, adapting and developing a method suitable for their analyte, sample matrix, and problem scenario. Because these projects encompass the complete analytical process, students must consider issues such as obtaining a representative sample, selecting a method of analysis, developing a suitable standardization, validating results, and implementing appropriate quality assessment/quality control practices. Most textbooks and monographs suitable for an undergraduate course in analytical chemistry, however, provide only limited coverage of these important topics. The need for short laboratory experiments emphasizing important facets of method development, such as selecting a method of standardization, is evident. The experiment reported here, which is suitable for an introductory course in analytical chemistry, illustrates the importance of matrix effects when selecting a method of standardization. Students also learn how a spike recovery is used to validate an analytical method, and obtain a practical experience in the difference between performing an external standardization and a standard addition.

Linear information retrieval method in X-ray grating-based phase contrast imaging and its interchangeability with tomographic reconstruction

NASA Astrophysics Data System (ADS)

Wu, Z.; Gao, K.; Wang, Z. L.; Shao, Q. G.; Hu, R. F.; Wei, C. X.; Zan, G. B.; Wali, F.; Luo, R. H.; Zhu, P. P.; Tian, Y. C.

2017-06-01

In X-ray grating-based phase contrast imaging, information retrieval is necessary for quantitative research, especially for phase tomography. However, numerous and repetitive processes have to be performed for tomographic reconstruction. In this paper, we report a novel information retrieval method, which enables retrieving phase and absorption information by means of a linear combination of two mutually conjugate images. Thanks to the distributive law of the multiplication as well as the commutative law and associative law of the addition, the information retrieval can be performed after tomographic reconstruction, thus simplifying the information retrieval procedure dramatically. The theoretical model of this method is established in both parallel beam geometry for Talbot interferometer and fan beam geometry for Talbot-Lau interferometer. Numerical experiments are also performed to confirm the feasibility and validity of the proposed method. In addition, we discuss its possibility in cone beam geometry and its advantages compared with other methods. Moreover, this method can also be employed in other differential phase contrast imaging methods, such as diffraction enhanced imaging, non-interferometric imaging, and edge illumination.

An In-Depth Review on Direct Additive Manufacturing of Metals

NASA Astrophysics Data System (ADS)

Azam, Farooq I.; Rani, Ahmad Majdi Abdul; Altaf, Khurram; Rao, T. V. V. L. N.; Aimi Zaharin, Haizum

2018-03-01

Additive manufacturing (AM), also known as 3D Printing, is a revolutionary manufacturing technique which has been developing rapidly in the last 30 years. The evolution of this precision manufacturing process from rapid prototyping to ready-to-use parts has significantly alleviated manufacturing constraints and design freedom has been outstandingly widened. AM is a non-conventional manufacturing technique which utilizes a 3D CAD model data to build parts by adding one material layer at a time, rather than removing it and fulfills the demand for manufacturing parts with complex geometric shapes, great dimensional accuracy, and easy to assemble parts. Additive manufacturing of metals has become the area of extensive research, progressing towards the production of final products and replacing conventional manufacturing methods. This paper provides an insight to the available metal additive manufacturing technologies that can be used to produce end user products without using conventional manufacturing methods. The paper also includes the comparison of mechanical and physical properties of parts produced by AM with the parts manufactured using conventional processes.

Authenticity analysis of pear juice employing chromatographic fingerprinting.

PubMed

Willems, Jamie L; Low, Nicholas H

2014-12-03

Pear juice is predominately composed of carbohydrates/polyols (>95% of the total soluble solids), making it susceptible to adulteration by the addition of less expensive commercial sweeteners. In this research, the major carbohydrate and polyol (fructose, glucose, sucrose, and sorbitol) content of 32 pure pear juices representing five world producing regions and three years of production was determined. Additionally, methods employing oligosaccharide profiling to detect the debasing of these samples with four commercial sweeteners (HFCS 55 and 90, TIS, and HIS) were developed using capillary gas chromatography with flame ionization detection (CGC-FID) and high-performance liquid chromatography with pulsed amperometric detection (HPAE-PAD). Detection limits for the four commercial sweeteners ranged from 0.5 to 5.0% (v/v). In addition, the developed CGC-FID method could be used to (a) detect the addition of pear to apple juice via arbutin detection and (b) determine if a pear juice was produced using enzymatic liquefaction via the presence of O-β-d-glucopyranosyl-(1→4)-d-glucopyranose (cellobiose), all within a single chromatographic analysis.

Examining Influences of Parenting Styles and Practices on Physical Activity and Sedentary Behaviors in Latino Children in the United States: Integrative Review

PubMed Central

Muñoz, Mario A; Wallington, Sherrie F; Greaney, Mary L

2018-01-01

Background Research indicates that parents influence their children’s physical activity (PA) and sedentary behaviors (SB) through their parenting styles and practices. Objective The objectives of this paper were to evaluate existing research examining the associations between parenting styles, parenting practices, and PA and SB among Latino children aged between 2 and 12 years, highlight limitations of the existing research, and generate suggestions for future research. Methods The method of this integrative review was informed by methods developed by Whittemore and Knafl, which allow for the inclusion of qualitative, quantitative, and mixed-methods studies. Using the Preferred Reporting Items for Systematic Reviews Meta-Analyses guidelines, five electronic academic databases (PubMed, SPORTDiscus, PsycINFO, PsycARTICLES, and CINAHL) were searched for peer-reviewed, full-text papers published in English. Of the 641 unique citations identified, 67 full-text papers were retrieved, and 16 were selected for review. Results The majority of the 16 reviewed studies were conducted with predominantly Mexican American or Mexican immigrant samples, and only 1 study examined the association between parenting styles and Latino children’s PA and SB. Most (n=15) reviewed studies assessed the influence of parenting practices on children’s PA and SB, and they provide good evidence that parenting practices such as offering verbal encouragement, prompting the child to be physically active, providing logistic support, engaging and being involved in PA, monitoring, and offering reinforcement and rewards encourage, facilitate, or increase children’s PA. The examined studies also provide evidence that parenting practices, such as setting rules and implementing PA restrictions due to safety concerns, weather, and using psychological control discourage, hinder, or decrease children’s PA. Conclusions Because this review found a very small number of studies examining the relationship between parenting styles and Latino children’s PA and SB, additional research is needed. Given that the majority of reviewed studies were conducted with predominantly Mexican American or Mexican immigrant samples, additional research examining parenting styles, parenting practices, and PA and SB among multiethnic Latino groups is needed to design interventions tailored to the needs of this ethnically diverse population group. PMID:29382629

Science teachers' knowledge, beliefs, values, and concerns of teaching through inquiry

NASA Astrophysics Data System (ADS)

Assiri, Yahya Ibrahim

This study investigated elementary science teachers' knowledge, beliefs, values, and concerns of teaching through inquiry. A mixed-methods research design was utilized to address the research questions. Since this study was designed as a mixed-methods research approach, the researcher gathered two type of data: quantitative and qualitative. The study was conducted in Mohayel School District, Saudi Arabia. The information was collected from 51 participants using a questionnaire with multiple choice questions; also, 11 participants were interviewed. After collecting the data, descriptive and comparative approaches were used. In addition, themes and codes were used to obtain the results. The results indicated that the mean of elementary science teachers' knowledge was 51.23%, which was less than 60% which was the acceptable score. Also, the qualitative results showed that science teachers had a limited background of teaching through inquiry. In addition, the elementary science teachers had a high level of belief to teach science through inquiry since the mean was 3.99 out of 5.00. These quantitative results were confirmed by the qualitative data. Moreover, the overall mean of elementary science teachers was 4.01, which indicated that they believed in the importance of teaching science through inquiry which was also confirmed by the responses of teachers in the interviews. Also, the findings indicated that elementary school science teachers had concerns about teaching science through inquiry since the overall mean was 3.53. In addition, the interviewees mentioned that they faced some obstacles when they teach by inquiry, such as time, resources, class size, and the teachers' background. Generally, the results did not show any significant differences among elementary science teachers' knowledge, beliefs, values, and concerns depending on gender, level of education, and teaching experience. However, the findings indicated there was one significant difference which was the level of teaching experience between groups: (6-10) years and (11-15) years, and (16- more) and (11-15) years. In addition, the implications and suggestions for future research were provided to enhance teaching science through inquiry.

Narrative research methods in palliative care contexts: two case studies.

PubMed

Thomas, Carol; Reeve, Joanne; Bingley, Amanda; Brown, Janice; Payne, Sheila; Lynch, Tom

2009-05-01

Narrative methods have played a minor role in research with dying patients to date, and deserve to be more widely understood. This article illustrates the utility and value of these methods through the narrative analysis of semi-structured interview data gathered in a series of interviews with two terminally ill cancer patients and their spouses. The methods and findings associated with these two case studies are outlined and discussed. The authors' contention is that an analytical focus on the naturalistic storytelling of patients and informal carers can throw new light on individuals' perceived illness states and symptoms, care-related needs, behaviors, and desires. In addition, the juxtaposition of two cases that share a number of markers of risk and need at the end of life illustrates how the narrative analysis of patients' experiential accounts can assist in uncovering important distinctions between cases that are of relevance to care management.

Methods for the behavioral, educational, and social sciences: an R package.

PubMed

Kelley, Ken

2007-11-01

Methods for the Behavioral, Educational, and Social Sciences (MBESS; Kelley, 2007b) is an open source package for R (R Development Core Team, 2007b), an open source statistical programming language and environment. MBESS implements methods that are not widely available elsewhere, yet are especially helpful for the idiosyncratic techniques used within the behavioral, educational, and social sciences. The major categories of functions are those that relate to confidence interval formation for noncentral t, F, and chi2 parameters, confidence intervals for standardized effect sizes (which require noncentral distributions), and sample size planning issues from the power analytic and accuracy in parameter estimation perspectives. In addition, MBESS contains collections of other functions that should be helpful to substantive researchers and methodologists. MBESS is a long-term project that will continue to be updated and expanded so that important methods can continue to be made available to researchers in the behavioral, educational, and social sciences.

Analytical, Characterization, and Stability Studies of Organic Chemical, Drugs, and Drug Formulation

DTIC Science & Technology

2014-05-21

stability studies was maintained over the entire contract period to ensure the continued integrity of the drug in its clinical use . Because our...facile automation. We demonstrated the method in principle, but were unable to remove the residual t-butanol to ɘ.5%. With additional research using ...to its use of ethylene oxide for sterilization, which is done in small batches. The generally recognized method of choice to produce a parenteral

Effectiveness of antimicrobial food packaging materials.

PubMed

Cooksey, K

2005-10-01

Antimicrobial additives have been used successfully for many years as direct food additives. The literature provides evidence that some of these additives may be effective as indirect food additives incorporated into food packaging materials. Antimicrobial food packaging is directed toward the reduction of surface contamination of processed, prepared foods such as sliced meats and Frankfurter sausages (hot dogs). The use of such packaging materials is not meant to be a substitute for good sanitation practices, but it should enhance the safety of food as an additional hurdle for the growth of pathogenic and/or spoilage microorganisms. Studies have focused on establishing methods for coating low-density polyethylene film or barrier films with methyl cellulose as a carrier for nisin. These films have significantly reduced the presence of Listeria monocytogenes in solutions and in vacuum packaged hot dogs. Other research has focused on the use of chitosan to inhibit L. monocytogenes and chlorine dioxide sachets for the reduction of Salmonella on modified atmosphere-packaged fresh chicken breasts. Overall, antimicrobial packaging shows promise as an effective method for the inhibition of certain bacteria in foods, but barriers to their commercial implementation continue to exist.

Planning for Action Research: Looking at Practice through a Different Lens

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hahn, Heidi A.

2012-08-03

It has been my experience that behavioral science practitioners, including myself, often 'back into' action research. That is, we start out doing a process improvement or intervention and discover something along the way - generalizable knowledge - that seems worthwhile to share with our community of practice. What if, instead of looking at these projects from the point of view of practitioners, we looked at them as research from the outset? Would that change the outcome or generate additional knowledge? This paper compares and contrasts process improvement and action research methods, and illustrates how use of a research 'lens' canmore » enhance behavioral science interventions and the knowledge that may result from them.« less

A regularized variable selection procedure in additive hazards model with stratified case-cohort design.

PubMed

Ni, Ai; Cai, Jianwen

2018-07-01

Case-cohort designs are commonly used in large epidemiological studies to reduce the cost associated with covariate measurement. In many such studies the number of covariates is very large. An efficient variable selection method is needed for case-cohort studies where the covariates are only observed in a subset of the sample. Current literature on this topic has been focused on the proportional hazards model. However, in many studies the additive hazards model is preferred over the proportional hazards model either because the proportional hazards assumption is violated or the additive hazards model provides more relevent information to the research question. Motivated by one such study, the Atherosclerosis Risk in Communities (ARIC) study, we investigate the properties of a regularized variable selection procedure in stratified case-cohort design under an additive hazards model with a diverging number of parameters. We establish the consistency and asymptotic normality of the penalized estimator and prove its oracle property. Simulation studies are conducted to assess the finite sample performance of the proposed method with a modified cross-validation tuning parameter selection methods. We apply the variable selection procedure to the ARIC study to demonstrate its practical use.

Detection of allergenic additives in processed meat products.

PubMed

Spychaj, Anita; Pospiech, Edward; Iwańska, Ewa; Montowska, Magdalena

2018-04-19

At present, allergic response to food components is an increasing problem all over the world. Therefore it is important to protect people vulnerable to food allergens against accidental and unintended consumption of products containing allergic ingredients. The meat industry commonly uses various allergic additives in production of processed products, i.e. legumes (soy, peas, beans), milk and egg preparations, cereals containing gluten (wheat, rye, barley and oats), and spices (celery and mustard). These meat additives have specific technological properties which help to create a texture, flavour profile or affect the nutritional value, although some of them, such as soy, mustard, milk and egg white proteins can cause severe allergic reactions. The aim of this paper is to discuss the application of various recently established methods of detection of allergenic additives in processed meat products, for instance cold cuts and sausages. The new methods are based mainly on protein, DNA and also isoflavones or phytic acid analysis. The article also characterises the latest trends in the development of research on the methods which would enable quick and reliable identification of targeted allergens in meat products. This article is protected by copyright. All rights reserved.

Expanding roles in a library-based bioinformatics service program: a case study

PubMed Central

Li, Meng; Chen, Yi-Bu; Clintworth, William A

2013-01-01

Question: How can a library-based bioinformatics support program be implemented and expanded to continuously support the growing and changing needs of the research community? Setting: A program at a health sciences library serving a large academic medical center with a strong research focus is described. Methods: The bioinformatics service program was established at the Norris Medical Library in 2005. As part of program development, the library assessed users' bioinformatics needs, acquired additional funds, established and expanded service offerings, and explored additional roles in promoting on-campus collaboration. Results: Personnel and software have increased along with the number of registered software users and use of the provided services. Conclusion: With strategic efforts and persistent advocacy within the broader university environment, library-based bioinformatics service programs can become a key part of an institution's comprehensive solution to researchers' ever-increasing bioinformatics needs. PMID:24163602

Computational aeroacoustics and numerical simulation of supersonic jets

NASA Technical Reports Server (NTRS)

Morris, Philip J.; Long, Lyle N.

1996-01-01

The research project has been a computational study of computational aeroacoustics algorithms and numerical simulations of the flow and noise of supersonic jets. During this study a new method for the implementation of solid wall boundary conditions for complex geometries in three dimensions has been developed. In addition, a detailed study of the simulation of the flow in and noise from supersonic circular and rectangular jets has been conducted. Extensive comparisons have been made with experimental measurements. A summary of the results of the research program are attached as the main body of this report in the form of two publications. Also, the report lists the names of the students who were supported by this grant, their degrees, and the titles of their dissertations. In addition, a list of presentations and publications made by the Principal Investigators and the research students is also included.

Quantification of Ice Accretions for Icing Scaling Evaluations

NASA Technical Reports Server (NTRS)

Ruff, Gary A.; Anderson, David N.

2003-01-01

The comparison of ice accretion characteristics is an integral part of aircraft icing research. It is often necessary to compare an ice accretion obtained from a flight test or numerical simulation to one produced in an icing wind tunnel or for validation of an icing scaling method. Traditionally, this has been accomplished by overlaying two-dimensional tracings of ice accretion shapes. This paper addresses the basic question of how to compare ice accretions using more quantitative methods. For simplicity, geometric characteristics of the ice accretions are used for the comparison. One method evaluated is a direct comparison of the percent differences of the geometric measurements. The second method inputs these measurements into a fuzzy inference system to obtain a single measure of the goodness of the comparison. The procedures are demonstrated by comparing ice shapes obtained in the Icing Research Tunnel at NASA Glenn Research Center during recent icing scaling tests. The results demonstrate that this type of analysis is useful in quantifying the similarity of ice accretion shapes and that the procedures should be further developed by expanding the analysis to additional icing data sets.

A novel hybrid MCDM model for performance evaluation of research and technology organizations based on BSC approach.

PubMed

Varmazyar, Mohsen; Dehghanbaghi, Maryam; Afkhami, Mehdi

2016-10-01

Balanced Scorecard (BSC) is a strategic evaluation tool using both financial and non-financial indicators to determine the business performance of organizations or companies. In this paper, a new integrated approach based on the Balanced Scorecard (BSC) and multi-criteria decision making (MCDM) methods are proposed to evaluate the performance of research centers of research and technology organization (RTO) in Iran. Decision-Making Trial and Evaluation Laboratory (DEMATEL) are employed to reflect the interdependencies among BSC perspectives. Then, Analytic Network Process (ANP) is utilized to weight the indices influencing the considered problem. In the next step, we apply four MCDM methods including Additive Ratio Assessment (ARAS), Complex Proportional Assessment (COPRAS), Multi-Objective Optimization by Ratio Analysis (MOORA), and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) for ranking of alternatives. Finally, the utility interval technique is applied to combine the ranking results of MCDM methods. Weighted utility intervals are computed by constructing a correlation matrix between the ranking methods. A real case is presented to show the efficacy of the proposed approach. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessment of four methods to estimate surface UV radiation using satellite data, by comparison with ground measurements from four stations in Europe

NASA Astrophysics Data System (ADS)

Arola, Antti; Kalliskota, S.; den Outer, P. N.; Edvardsen, K.; Hansen, G.; Koskela, T.; Martin, T. J.; Matthijsen, J.; Meerkoetter, R.; Peeters, P.; Seckmeyer, G.; Simon, P. C.; Slaper, H.; Taalas, P.; Verdebout, J.

2002-08-01

Four different satellite-UV mapping methods are assessed by comparing them against ground-based measurements. The study includes most of the variability found in geographical, meteorological and atmospheric conditions. Three of the methods did not show any significant systematic bias, except during snow cover. The mean difference (bias) in daily doses for the Rijksinstituut voor Volksgezondheid en Milieu (RIVM) and Joint Research Centre (JRC) methods was found to be less than 10% with a RMS difference of the order of 30%. The Deutsches Zentrum für Luft- und Raumfahrt (DLR) method was assessed for a few selected months, and the accuracy was similar to the RIVM and JRC methods. It was additionally used to demonstrate how spatial averaging of high-resolution cloud data improves the estimation of UV daily doses. For the Institut d'Aéronomie Spatiale de Belgique (IASB) method the differences were somewhat higher, because of their original cloud algorithm. The mean difference in daily doses for IASB was about 30% or more, depending on the station, while the RMS difference was about 60%. The cloud algorithm of IASB has been replaced recently, and as a result the accuracy of the IASB method has improved. Evidence is found that further research and development should focus on the improvement of the cloud parameterization. Estimation of daily exposures is likely to be improved if additional time-resolved cloudiness information is available for the satellite-based methods. It is also demonstrated that further development work should be carried out on the treatment of albedo of snow-covered surfaces.

Barriers to and Facilitators of Research Utilization: A Survey of Registered Nurses in China

PubMed Central

Wang, Li-Ping; Jiang, Xiao-Lian; Wang, Lei; Wang, Guo-Rong; Bai, Yang-Jing

2013-01-01

Aims This survey aims to describe the perception of barriers to and facilitators of research utilization by registered nurses in Sichuan province, China, and to explore the factors influencing the perceptions of the barriers to and facilitators of research utilization. Methods A cross sectional survey design and a double cluster sampling method were adopted. A total of 590 registered nurses from 3 tertiary level hospitals in Sichuan province, China, were recruited in a period from September 2006 to January 2007. A modified BARRUERS Scale and a Facilitators Scale were used. Data were analyzed with descriptive statistics, rank transformation test, and multiple linear regression. Results Barriers related to the setting subscale were more influential than barriers related to other subscales. The lack of authority was ranked as the top greatest barrier (15.7%), followed by the lack of time (13.4%) and language barrier (15.0%). Additional barriers identified were the reluctance of patients to research utilization, the lack of funding, and the lack of legal protection. The top three greatest facilitators were enhancing managerial support (36.9%), advancing education to increase knowledge base (21.1%), and increasing time for reviewing and implementing (17.5%), while cooperation of patients to research utilization, establishing a panel to evaluate researches, and funding were listed as additional facilitators. Hospital, educational background, research experience, and knowledge on evidence-based nursing were the factors influencing perceptions of the barriers and facilitators. Conclusions Nurses in China are facing a number of significant barriers in research utilization. Enhancing managerial support might be the most promising facilitator, given Chinese traditional culture and existing health care system. Hospital, educational background, research experience and knowledge on evidence-based nursing should be taken into account to promote research utilization. The BARRIERS Scale should consider funding and involvement of patients in research utilization. PMID:24312380

Vertical Interaction in Open Software Engineering Communities

DTIC Science & Technology

2009-03-01

Program in CASOS (NSF,DGE-9972762), the Office of Naval Research under Dynamic Network Analysis program (N00014-02-1-0973, the Air Force Office of...W91WAW07C0063) for research in the area of dynamic network analysis. Additional support was provided by CASOS - the center for Computational Analysis of Social...methods across the domain. For a given project, de - velopers can choose from dozens of models, tools, platforms, and languages for specification, design

A Case Study in Design Thinking Applied Through Aviation Mission Support Tactical Advancements for the Next Generation (TANG)

DTIC Science & Technology

2017-12-01

This is an examination of the research, execution, and follow- on developments supporting the Design Thinking event explored through Case Study ...research, execution, and follow- on developments supporting the Design Thinking event explored through case study methods. Additionally, the lenses of...total there have been two Naval Postgraduate School (NPS) case study theses on U.S. Navy innovation events as well as other works examining the

Summer Research Program (1992). Summer Faculty Research Program (SFRP) Reports. Volume 4. Rome Laboratory

DTIC Science & Technology

1992-12-01

cm 2 heat flux which must be transferred by the buoyancy-induced gas flow. A survey of electronic cooling literature can easily demonstrate how large...Toward Implementation of a Certification Framework for Reusable Dr. Allen S. Parrish Software Modules 15 Data Association Problems in Multisensor Data...next section and the reader is referred to [5] for additional details of the analysis. Then the method is applied to a dipole element with straight

Engaging Medical Students in Research: Reaching out to the Next Generation of Physician-Scientists

PubMed Central

Cluver, Jeffrey S.; Book, Sarah W.; Brady, Kathleen T.; Thornley, Nicola; Back, Sudie E.

2013-01-01

Objective The authors describe a multifaceted educational training approach aimed at increasing medical student involvement in psychiatric research. Method A description of the initiative is provided, including the rationale and expected impact of each component. Results Medical student involvement in research projects has increased steadily since implementation. This applies to summer research projects as well as elective research rotations for senior medical students. Furthermore, a substantial proportion of students who participate in research continue to engage in research activities following completion of the program (e.g., through additional research participation, conference presentations). Conclusion A proactive and well-organized approach to encouraging medical student participation in research can increase the number of students who choose to engage in a research and may ultimately help increase the number of physician-scientists. PMID:24913099

Simple Additive Weighting to Diagnose Rabbit Disease

NASA Astrophysics Data System (ADS)

Ramadiani; Marissa, Dyna; Jundillah, Muhammad Labib; Azainil; Hatta, Heliza Rahmania

2018-02-01

Rabbit is one of the many pets maintained by the general public in Indonesia. Like other pet, rabbits are also susceptible to various diseases. Society in general does not understand correctly the type of rabbit disease and the way of treatment. To help care for sick rabbits it is necessary a decision support system recommendation diagnosis of rabbit disease. The purpose of this research is to make the application of rabbit disease diagnosis system so that can help user in taking care of rabbit. This application diagnoses the disease by tracing the symptoms and calculating the recommendation of the disease using Simple Additive Weighting method. This research produces a web-based decision support system that is used to help rabbit breeders and the general public.

[Research strategies for feed additives and veterinary medicines from side products of Chinese medicine resources industrialization].

PubMed

Zhao, Ming; Duan, Jin-Ao; Zhang, Sen; Guo, Sheng; Su, Shu-Lan; Wu, Qi-Nan; Tang, Yu-Ping; Zeng, Jian-Guo

2017-09-01

The global antimicrobial resistance has been a big challenge to the human health for years. It has to make balance between the safety of animal products and the use of antimicrobials in animal husbandry. Any methods that can minimize or even phase out the use of antimicrobials in animal husbandry should be encouraged. We herein describe the research strategies for feed additives and veterinary medicines from the side products of Chinese medicine resources industrialization. Killing two birds with one stone-besides the major purposes, the rational utilization of non-medicinal parts and wastes of industrialization of Chinese herbal medicines is also achieved under the proposed strategies. Copyright© by the Chinese Pharmaceutical Association.

Methods and Processes of Developing the Strengthening the Reporting of Observational Studies in Epidemiology-Veterinary (STROBE-Vet) Statement.

PubMed

Sargeant, J M; O'Connor, A M; Dohoo, I R; Erb, H N; Cevallos, M; Egger, M; Ersbøll, A K; Martin, S W; Nielsen, L R; Pearl, D L; Pfeiffer, D U; Sanchez, J; Torrence, M E; Vigre, H; Waldner, C; Ward, M P

2016-12-01

Reporting of observational studies in veterinary research presents challenges that often are not addressed in published reporting guidelines. Our objective was to develop an extension of the STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) statement that addresses unique reporting requirements for observational studies in veterinary medicine related to health, production, welfare, and food safety. We conducted a consensus meeting with 17 experts in Mississauga, Canada. Experts completed a premeeting survey about whether items in the STROBE statement should be modified or added to address unique issues related to observational studies in animal species with health, production, welfare, or food safety outcomes. During the meeting, each STROBE item was discussed to determine whether or not rewording was recommended, and whether additions were warranted. Anonymous voting was used to determine consensus. Six items required no modifications or additions. Modifications or additions were made to the STROBE items 1 (title and abstract), 3 (objectives), 5 (setting), 6 (participants), 7 (variables), 8 (data sources and measurement), 9 (bias), 10 (study size), 12 (statistical methods), 13 (participants), 14 (descriptive data), 15 (outcome data), 16 (main results), 17 (other analyses), 19 (limitations), and 22 (funding). The methods and processes used were similar to those used for other extensions of the STROBE statement. The use of this STROBE statement extension should improve reporting of observational studies in veterinary research by recognizing unique features of observational studies involving food-producing and companion animals, products of animal origin, aquaculture, and wildlife.

Adaptation to prolonged bedrest in man: A compendium of research. [bibliographies on clinical medicine and human pathology

NASA Technical Reports Server (NTRS)

Greenleaf, J. E.; Greenleaf, C. J.; Vanderveer, D.; Dorchak, K. J.

1976-01-01

A compilation of major studies that describe the clinical observations and elucidate the physiological mechanisms of the adaptive process of man undergoing prolonged bed rest is presented. Additional studies are included that provide background information in the form of reviews or summaries of the process. Wherever possible a detailed annotation is provided under the subheadings: (1) purpose, (2) procedure and methods, (3) results, and (4) conclusions. Additional references are provided in a selected bibliography.

Addition of CF3 across unsaturated moieties: a powerful functionalization tool

PubMed Central

2014-01-01

In the last few years, the efficient introduction of trifluoromethyl groups in organic molecules has become a major research focus. This review highlights the recent developments enabling the incorporation of CF3 groups across unsaturated moieties, preferentially alkenes, and the mechanistic scenarios governing these transformations. We have specially focused on methods involving the simultaneous formation of C–CF3 and C–C or C–heteroatom bonds by formal addition reactions across π-systems, as such difunctionalization processes hold valuable synthetic potential. PMID:24789472

Is the cervical vertebral maturation (CVM) method effective enough to replace the hand-wrist maturation (HWM) method in determining skeletal maturation?-A systematic review.

PubMed

Szemraj, Agnieszka; Wojtaszek-Słomińska, Anna; Racka-Pilszak, Bogna

2018-05-01

Chronological age provides only general information on the development of a child/adolescent. However, the biological age of the patient is more significant. One of the methods is the determination of the bone age based on the development of the hand and wrist bones. In 1972 a method for assessing cervical vertebral maturation on the cephalometric radiographs was introduced (CVM method). As a result, additional patient radiation was eliminated. Currently, this type of radiograph is routinely applied in orthodontic treatment. The aim of the study was to assess the usefulness of the CVM method and to verify the assumption, according to which the CVM method modified by Baccetti et al. may replace the method for the assessment of skeletal maturation based on a hand-wrist X-ray, which is known as the hand-wrist maturation (HWM) method. The present study reviewed the literature between 2006 and 2016. In the first stage of selection 905 articles were obtained. Finally, 10 articles were enrolled for the review. All of the studies presented a high level of correlation between the examined methods. In eight articles the researchers admitted that the CVM classification could replace the HWM method, known as the "gold standard". In two studies , the researchers suggested considering the CVM method an additional method despite its compatibility and usefulness. The lowest correlation coefficient was 0.616 and the highest 0.937. The assessment of the skeletal age with the CVM is done on a cephalometric radiograph, routinely used in orthodontic practice, which makes it easy to apply. The determination of features of only C2, C3 and C4 vertebrae is possible even if the patient wears an X-ray protective thyroid collar. Therefore, the radiation dose is minimized. The CVM method shows a high level of correlation with the HWM method. Copyright © 2018 Elsevier B.V. All rights reserved.

Optimizing the Treatment of Acute Duct-Destructive Pancreatitis

ERIC Educational Resources Information Center

Zhakiev, Bazylbek S.; Karsakbayev, Uteugali G.; Kelimberdiev, Mersaid S.; ?uhamedgalieva, Bodagoz M.; K?nonenko, Aleksander F.

2016-01-01

The search for new methods for treating duct-destructive pancreatitis is a relevant problem. Endogenous intoxication and oxidative stress that accompany acute pancreatitis often progress even after surgery, which forces one to search for additional possibilities of preventing these severe consequences. This research studied the effect of small…

Effect of moisture and aging on asphalt pavement life : part 1 - effect of moisture.

DOT National Transportation Integrated Search

1996-01-01

Considerable research has been carried out on the effect of water on asphalt mixtures, and test methods to investigate the effect of water have been developed. However, most of this work has been related to stripping and the effect of additives, wher...

Paediatric Palliative Care and Intellectual Disability--A Unique Context

ERIC Educational Resources Information Center

Duc, Jacqueline K.; Herbert, Anthony Robert; Heussler, Helen S.

2017-01-01

Background: Paediatric palliative care is a nuanced area of practice with additional complexities in the context of intellectual disability. There is currently minimal research to guide clinicians working in this challenging area of care. Method: This study describes the complex care of children with life-limiting conditions and intellectual…

Incorporating Yoga into College Counseling

ERIC Educational Resources Information Center

Adams, Christopher M.; Puig, Ana

2008-01-01

Yoga has become increasingly popular in the United States, and college counselors should be familiar with this practice due to its popularity among college students. This article provides a brief overview of yoga and research on its benefits for mental health concerns often experienced by college students. Additionally, it addresses methods of…

IMPROVING THE FLUOROMETRIC AMMONIUM METHOD BY ACCOUNTING FOR MATRIX EFFECTS WITH STANDARD ADDITIONS. (R829426E02)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

32 CFR 37.515 - Must I do anything additional to determine the qualification of a consortium?

Code of Federal Regulations, 2010 CFR

2010-07-01

... SECRETARY OF DEFENSE DoD GRANT AND AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Pre-Award Business... relationship is essential to increase the research project's chances of success. (b) The collaboration... things, the consortium's: (1) Management structure. (2) Method of making payments to consortium members...

Discipline-Specific Language Instruction for International Students in Introductory Economics

ERIC Educational Resources Information Center

Nguyen, Trien T.; Williams, Julia; Trimarchi, Angela

2015-01-01

This paper explores student perceptions of the effects of pairing discipline-specific language instruction with the traditional method of course delivery in economics. Our research involved teaching content-based English as an additional language (EAL) tutorials to a small group of ten international students taking first-year introductory…

Teacher Perception on Differentiated Instruction and its Influence on Instructional Practice

ERIC Educational Resources Information Center

Burkett, Jacquelyn Ann

2013-01-01

Differentiated Instruction is an approach to teaching which meets the diverse academic needs of students by considering learner readiness, interest and learning style. The approach is grounded in the socio-cultural, multiple intelligence and learning style theories. In addition, differentiation is a research based method for meeting the…

Recreational Reading of International Students in Academic Libraries

ERIC Educational Resources Information Center

Bordonaro, Karen

2011-01-01

Recreational reading as a method of language learning has been a focus of investigation in second language education. This article considers recreational reading through the additional perspective of academic librarianship. Its purpose is to discover if recreational reading is a topic that lends itself to research through both perspectives. This…

Teachers' Perceptions of an Instructional Technology Coach

ERIC Educational Resources Information Center

Heimer, Heather B.

2017-01-01

The purpose of this mixed methods research study was to examine teachers' perceptions that an instructional technology coach as having an influence on improving their teaching practice, improving their integration of technology and 21st century skills, and improving student learning. Additionally, the study also examined whether perceptions…

Teaching Analytics: A Clustering and Triangulation Study of Digital Library User Data

ERIC Educational Resources Information Center

Xu, Beijie; Recker, Mimi

2012-01-01

Teachers and students increasingly enjoy unprecedented access to abundant web resources and digital libraries to enhance and enrich their classroom experiences. However, due to the distributed nature of such systems, conventional educational research methods, such as surveys and observations, provide only limited snapshots. In addition,…

The Shaping of Managers' Security Objectives through Information Security Awareness Training

ERIC Educational Resources Information Center

Harris, Mark A.

2010-01-01

Information security research states that corporate security policy and information security training should be socio-technical in nature and that corporations should consider training as a primary method of protecting their information systems. However, information security policies and training are predominately technical in nature. In addition,…

Rehabilitation Education Program for Stroke (REPS): Learning and Practice Outcomes

ERIC Educational Resources Information Center

McEwen, Sara; Szurek, Kristina; Polatajko, Helene J.; Rappolt, Susan

2005-01-01

Introduction: New research knowledge acquired from Web-based sources may have a better chance of being translated into practice when accompanied by additional educational strategies. This study was undertaken to investigate that hypothesis. Methods: The Rehabilitation Education Program for Stroke (REPS) combines a self-directed online learning…

Stepping Up to Motherhood among Inner-City Teens

ERIC Educational Resources Information Center

Shanok, Arielle F.; Miller, Lisa

2007-01-01

This mixed-methods, context-oriented study explored transitions to motherhood among pregnant and newly parenting inner-city teenagers (n = 80) attending an alternative public school. Additionally, a novel research approach was assessed. Using data from a 2-year psychotherapy trial, inductive content analyses of therapy sessions and post hoc…

Nicholas Metropolis Award for Outstanding Doctoral Thesis Work in Computational Physics: Quantum many-body physics of ultracold molecules in optical lattices: models and simulation methods

NASA Astrophysics Data System (ADS)

Wall, Michael

2014-03-01

Experimental progress in generating and manipulating synthetic quantum systems, such as ultracold atoms and molecules in optical lattices, has revolutionized our understanding of quantum many-body phenomena and posed new challenges for modern numerical techniques. Ultracold molecules, in particular, feature long-range dipole-dipole interactions and a complex and selectively accessible internal structure of rotational and hyperfine states, leading to many-body models with long range interactions and many internal degrees of freedom. Additionally, the many-body physics of ultracold molecules is often probed far from equilibrium, and so algorithms which simulate quantum many-body dynamics are essential. Numerical methods which are to have significant impact in the design and understanding of such synthetic quantum materials must be able to adapt to a variety of different interactions, physical degrees of freedom, and out-of-equilibrium dynamical protocols. Matrix product state (MPS)-based methods, such as the density-matrix renormalization group (DMRG), have become the de facto standard for strongly interacting low-dimensional systems. Moreover, the flexibility of MPS-based methods makes them ideally suited both to generic, open source implementation as well as to studies of the quantum many-body dynamics of ultracold molecules. After introducing MPSs and variational algorithms using MPSs generally, I will discuss my own research using MPSs for many-body dynamics of long-range interacting systems. In addition, I will describe two open source implementations of MPS-based algorithms in which I was involved, as well as educational materials designed to help undergraduates and graduates perform research in computational quantum many-body physics using a variety of numerical methods including exact diagonalization and static and dynamic variational MPS methods. Finally, I will mention present research on ultracold molecules in optical lattices, such as the exploration of many-body physics with polyatomic molecules, and the next generation of open source matrix product state codes. This work was performed in the research group of Prof. Lincoln D. Carr.

Accessible maps for the color vision deficient observers: past and present knowledge and future possibilities

NASA Astrophysics Data System (ADS)

Kvitle, Anne Kristin

2018-05-01

Color is part of the visual variables in map, serving an aesthetic part and as a guide of attention. Impaired color vision affects the ability to distinguish colors, which makes the task of decoding the map colors difficult. Map reading is reported as a challenging task for these observers, especially when the size of stimuli is small. The aim of this study is to review existing methods for map design for color vision deficient users. A systematic review of research literature and case studies of map design for CVD observers has been conducted in order to give an overview of current knowledge and future research challenges. In addition, relevant research on simulations of CVD and color image enhancement for these observers from other fields of industry is included. The study identified two main approaches: pre-processing by using accessible colors and post-processing by using enhancement methods. Some of the methods may be applied for maps, but requires tailoring of test images according to map types.

Supercritical Fluid Technologies to Fabricate Proliposomes.

PubMed

Falconer, James R; Svirskis, Darren; Adil, Ali A; Wu, Zimei

2015-01-01

Proliposomes are stable drug carrier systems designed to form liposomes upon addition of an aqueous phase. In this review, current trends in the use of supercritical fluid (SCF) technologies to prepare proliposomes are discussed. SCF methods are used in pharmaceutical research and industry to address limitations associated with conventional methods of pro/liposome fabrication. The SCF solvent methods of proliposome preparation are eco-friendly (known as green technology) and, along with the SCF anti-solvent methods, could be advantageous over conventional methods; enabling better design of particle morphology (size and shape). The major hurdles of SCF methods include poor scalability to industrial manufacturing which may result in variable particle characteristics. In the case of SCF anti-solvent methods, another hurdle is the reliance on organic solvents. However, the amount of solvent required is typically less than that used by the conventional methods. Another hurdle is that most of the SCF methods used have complicated manufacturing processes, although once the setup has been completed, SCF technologies offer a single-step process in the preparation of proliposomes compared to the multiple steps required by many other methods. Furthermore, there is limited research into how proliposomes will be converted into liposomes for the end-user, and how such a product can be prepared reproducibly in terms of vesicle size and drug loading. These hurdles must be overcome and with more research, SCF methods, especially where the SCF acts as a solvent, have the potential to offer a strong alternative to the conventional methods to prepare proliposomes.

Rapid determination of methylmercury in fish and shellfish: method development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hight, S.C.; Corcoran, M.T.

The AOAC official first action method for methylmercury in fish and shellfish was modified to provide more rapid determination. Methylmercury is isolated from homogenized, acetone-washed tissue by addition of HCl and extraction by toluene of the methylmercuric chloride produced. The extract is analyzed by electron capture gas chromatography (GC) on 5% DEGS-PS treated with mercuric chloride solution. The quantitation limit of the method is 0.25 ..mu..g Hg/g. Swordfish, shark, tuna, shrimp, clams, oysters, and NBS Research Material-50 (tuna) were analyzed for methylmercury by the AOAC official first action method. All products also were analyzed by the modified method and themore » AOAC official method for total Hg. In addition, selected extracts obtained with the modified method were analyzed by GC with Hg-selective, microwave-induced helium plasma detection. There was no significant different between the results for the various methods. Essentially all the Hg present (determined as total Hg) was in the organic form. Coefficients of variation from analyses by the modified method ranged from 1 to 7% for fish and shellfish containing methylmercury at levels of 0.50-2.30 ..mu..g Hg/g. The overall average recovery was 100.5%.« less

Meeting the challenge of interpretation: Hearing the voices of people with intellectual and developmental disability through I-Poems.

PubMed

Corby, Deirdre; Taggart, Laurence; Cousins, Wendy

2018-06-01

Including the inner perspectives of people who have intellectual disability can pose methodological challenges to qualitative researchers. This article explains how the Listening Guide was applied as an additional step in the analysis during a study which used hermeneutic interviews with people with intellectual disability as the sole method of data collection. An argument is made for the systematic application of the guide with a focus on the use of I-Poems. This article advances qualitative methodological approaches and concludes that this method of drawing attention to the participants' own voices provides a unique basis for interpreting interviews and tasks researchers to examine the use of the Listening Guide.

Real-time new satellite product demonstration from microwave sensors and GOES-16 at NRL TC web

NASA Astrophysics Data System (ADS)

Cossuth, J.; Richardson, K.; Surratt, M. L.; Bankert, R.

2017-12-01

The Naval Research Laboratory (NRL) Tropical Cyclone (TC) satellite webpage (https://www.nrlmry.navy.mil/TC.html) provides demonstration analyses of storm imagery to benefit operational TC forecast centers around the world. With the availability of new spectral information provided by GOES-16 satellite data and recent research into improved visualization methods of microwave data, experimental imagery was operationally tested to visualize the structural changes of TCs during the 2017 hurricane season. This presentation provides an introduction into these innovative satellite analysis methods, NRL's next generation satellite analysis system (the Geolocated Information Processing System, GeoIPSTM), and demonstration the added value of additional spectral frequencies when monitoring storms in near-realtime.

Assessing the impact of lyophilization process in production of implants based on the bacterial cellulose using Raman spectroscopy method

NASA Astrophysics Data System (ADS)

Timchenko, E. V.; Timchenko, P. E.; Pisareva, E. V.; Vlasov, M. Yu; Revin, V. V.; Klenova, N. A.; Asadova, A. A.

2017-01-01

In this article we present the research results of lyophilization process influence on the composition of hybrid materials based on the bacterial cellulose (BC) using Raman spectroscopy method. As an object of research was used BC, as well as hybrids based on it, comprising the various combinations of hydroxyapatite (HAP) and collagen. Our studies showed that during the lyophilization process changes the ratio of the individual components. It was found that for samples hybrid based on BC with addition of HAP occurs increase of PO4 3- peak intensity in the region 956 cm-1 with decreasing width, which indicates a change in the degree of HAP crystallinity.

ICASE/LaRC Workshop on Adaptive Grid Methods

NASA Technical Reports Server (NTRS)

South, Jerry C., Jr. (Editor); Thomas, James L. (Editor); Vanrosendale, John (Editor)

1995-01-01

Solution-adaptive grid techniques are essential to the attainment of practical, user friendly, computational fluid dynamics (CFD) applications. In this three-day workshop, experts gathered together to describe state-of-the-art methods in solution-adaptive grid refinement, analysis, and implementation; to assess the current practice; and to discuss future needs and directions for research. This was accomplished through a series of invited and contributed papers. The workshop focused on a set of two-dimensional test cases designed by the organizers to aid in assessing the current state of development of adaptive grid technology. In addition, a panel of experts from universities, industry, and government research laboratories discussed their views of needs and future directions in this field.

A testpart for interdisciplinary analyses in micro production engineering

DOE PAGES

Möhring, H. -C.; Kersting, P.; Carmignato, S.; ...

2015-04-26

In 2011, a round robin test was initiated within the group of CIRP Research Affiliates. The aim was to establish a platform for linking interdisciplinary research in order to share the expertise and experiences of participants all over the world. This paper introduces a testpart which has been designed to allow an analysis of different manufacturing technologies, simulation methods, machinery and metrology as well as process and production planning aspects. Current investigations are presented focusing on the machining and additive processes to produce the geometry, simulation approaches, machine analysis, and a comparison of measuring technologies. Challenges and limitations regarding themore » manufacturing and evaluation of the testpart features by the applied methods are discussed.« less

A Computer Analysis Study of the Word Style in Love-songs of Tshang yang Gya tsho

NASA Astrophysics Data System (ADS)

Yonghong, Li; SunTing; Lei, Guo; Hongzhi, Yu

Based on the statistical methods of corpus and the 124 love-songs of Tshang yang Gya tsho as the studying object, this paper have set up the principles of vocabulary segmentation and built the love-songs corpus of Tibetan and Tibetan-Chinese grammar separation lexicon corpus. Then it did quantitative research on the achievement of "love-songs" in the language arts from three aspects: the length of the vocabularie's, the frequency rate of the vocabularies, and the distribution of the term's number in the verses and the songs. In addition it also introduced a new kind of researching idea and method for the study of Tibetan literature.

Assessing aspects of creativity in deaf and hearing high school students.

PubMed

Stanzione, Christopher M; Perez, Susan M; Lederberg, Amy R

2013-04-01

To address the paucity of current research on the development of creativity in deaf students, and to extend existing research to adolescents, the present study investigated divergent thinking, a method of assessing creativity, in both deaf and hearing adolescents. We assessed divergent thinking in two domains, figural and verbal, while also adjusting the instructional method in written format, sign language, or spoken English. Deaf students' performance was equal to, or more creative than, hearing students on the figural assessment of divergent thinking, but less creative on the verbal assessment. Additional studies should be conducted to determine whether this was an anomalous finding or one that might contribute to hypotheses yielding effective interventions.

A simple method for determining stress intensity factors for a crack in bi-material interface

NASA Astrophysics Data System (ADS)

Morioka, Yuta

Because of violently oscillating nature of stress and displacement fields near the crack tip, it is difficult to obtain stress intensity factors for a crack between two dis-similar media. For a crack in a homogeneous medium, it is a common practice to find stress intensity factors through strain energy release rates. However, individual strain energy release rates do not exist for bi-material interface crack. Hence it is necessary to find alternative methods to evaluate stress intensity factors. Several methods have been proposed in the past. However they involve mathematical complexity and sometimes require additional finite element analysis. The purpose of this research is to develop a simple method to find stress intensity factors in bi-material interface cracks. A finite element based projection method is proposed in the research. It is shown that the projection method yields very accurate stress intensity factors for a crack in isotropic and anisotropic bi-material interfaces. The projection method is also compared to displacement ratio method and energy method proposed by other authors. Through comparison it is found that projection method is much simpler to apply with its accuracy comparable to that of displacement ratio method.

Patterns and biases in climate change research on amphibians and reptiles: a systematic review

PubMed Central

2016-01-01

Climate change probably has severe impacts on animal populations, but demonstrating a causal link can be difficult because of potential influences by additional factors. Assessing global impacts of climate change effects may also be hampered by narrow taxonomic and geographical research foci. We review studies on the effects of climate change on populations of amphibians and reptiles to assess climate change effects and potential biases associated with the body of work that has been conducted within the last decade. We use data from 104 studies regarding the effect of climate on 313 species, from 464 species–study combinations. Climate change effects were reported in 65% of studies. Climate change was identified as causing population declines or range restrictions in half of the cases. The probability of identifying an effect of climate change varied among regions, taxa and research methods. Climatic effects were equally prevalent in studies exclusively investigating climate factors (more than 50% of studies) and in studies including additional factors, thus bolstering confidence in the results of studies exclusively examining effects of climate change. Our analyses reveal biases with respect to geography, taxonomy and research question, making global conclusions impossible. Additional research should focus on under-represented regions, taxa and questions. Conservation and climate policy should consider the documented harm climate change causes reptiles and amphibians. PMID:27703684

Half-century research developments in maritime accidents: Future directions.

PubMed

Luo, Meifeng; Shin, Sung-Ho

2016-04-19

Over the past 50 years, research in maritime accidents has undergone a series of fundamental changes. Understanding the evolution of these changes can help maritime communities to know what has been done in the past, how maritime safety can be improved in the future, and how to reduce or eliminate the risks to ships, the lives aboard them, the cargo they carry, and the marine environment. This study conducts a comprehensive literature review on research in maritime accidents, comprising 572 papers published in 125 journals over the 50 years from 1965 to 2014. The patterns of evolution of the researchers, the journals, the disciplines involved, the research methods, the major issues and causes, and the data sources are identified, and the changes explained. We find that the main focus of research in maritime accidents has shifted over the past 50 years from naval architecture to human error, and may continue to expand into socio-economic factors. In addition, future research in maritime accidents will be multi-disciplinary, use multiple data sources, and adopt advanced research methods, to account for complex interactions between the natural environment, the development of naval technology, human behavior, and shipping market conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Islamic approach in counseling.

PubMed

Hanin Hamjah, Salasiah; Mat Akhir, Noor Shakirah

2014-02-01

A religious approach is one of the matters emphasized in counseling today. Many researchers find that there is a need to apply the religious element in counseling because religion is important in a client's life. The purpose of this research is to identify aspects of the Islamic approach applied in counseling clients by counselors at Pusat Kaunseling Majlis Agama Islam Negeri Sembilan (PKMAINS). In addition, this research also analyses the Islamic approach applied in counseling at PKMAINS with reference to al-Quran and al-Sunnah. This is a qualitative research in the form of case study at PKMAINS. The main method used in this research is interview. The research instrument used is interview protocol. The respondents in this study include 9 counselors who serve in one of the counseling centers in Malaysia. This study also uses questionnaire as an additional instrument, distributed to 36 clients who receive counseling service at the center. The findings of the study show that the Islamic approach applied in counseling at PKMAINS may be categorized into three main aspects: aqidah (faith), ibadah (worship/ultimate devotion and love for God) and akhlaq (moral conduct). Findings also show that the counseling in these aspects is in line with Islamic teachings as contained in al-Quran and al-Sunnah.

Getting under the skin of the primary care consultation using video stimulated recall: a systematic review

PubMed Central

2014-01-01

Background Video stimulated recall (VSR) is a method of enhancing participants’ accounts of the consultation using a video recording of the event to encourage and prompt recall in a post consultation interview. VSR is used in education and education research, and to a lesser extent in medical and nursing research. Little is known about the sort of research questions that lend themselves best to the use of VSR or the impact of the specific VSR procedure on study quality. This systematic review describes studies in primary care that have used the method and aims to identify the strengths, weaknesses and role of VSR. Methods A systematic literature search has been conducted to identify primary care consultation research using VSR. Two authors undertook data extraction and quality appraisal of identified papers and a narrative synthesis has been conducted to draw together the findings. In addition, theory on classifying VSR procedures derived from other disciplines is used as a lens through which to assess the relevance of VSR technique. Results Twenty eight publications were identified that reported VSR in primary care doctor-patient consultation research. VSR was identified as a useful method to explore specific events within the consultation, mundane or routine occurrences, non-spoken events and appears to particularly add value to doctor’s post consultation accounts. However, studies frequently had insufficient description of methods to properly evaluate both the quality of the study, and the influence of VSR technique on findings. Conclusions VSR is particularly useful for study of specific consultation events when a ‘within case’ approach is used in analysis, comparing and contrasting findings from the consultation and post-consultation interview. Alignment of the choice of VSR procedure and sampling to the study research question was established as particularly important in the quality of studies. Future researchers may consider the role of process evaluation to understand further the impact of research design on data yielded and the acceptability of the method to participants. PMID:25175450

Solutol and cremophor products as new additives in suppository formulation.

PubMed

Berkó, Szilvia; Regdon, Géza; Erös, István

2002-01-01

Our research has a double purpose. On the one hand, doctors have expressed the need to formulate a rectal suppository dosage form from diuretic ethacrynic acid, which would add to the choice of treatment methods and thereby increase the possibilities of individual cure. On the other hand, the liberation and thereby the bioavailability of poorly-soluble ethacrynic acid needs to be enhanced, and for this purpose solubility-increasing additives new to rectal therapy were used. Solutol HS 15, Cremophor RH 40, and Cremophor RH 60 were used as additives in concentrations of 1, 3, 5, and 10%. The quantity of drug released changed as a function of additive concentration. Depending on the acceptor phase, the best results were achieved with an additive concentration of 1-3%, which is related to the optimal additive quantity accumulated on the boundary surface.

Analyzing partially missing confounder information in comparative effectiveness and safety research of therapeutics.

PubMed

Toh, Sengwee; García Rodríguez, Luis A; Hernán, Miguel A

2012-05-01

Electronic healthcare databases are commonly used in comparative effectiveness and safety research of therapeutics. Many databases now include additional confounder information in a subset of the study population through data linkage or data collection. We described and compared existing methods for analyzing such datasets. Using data from The Health Improvement Network and the relation between non-steroidal anti-inflammatory drugs and upper gastrointestinal bleeding as an example, we employed several methods to handle partially missing confounder information. The crude odds ratio (OR) of upper gastrointestinal bleeding was 1.50 (95% confidence interval: 0.98, 2.28) among selective cyclo-oxygenase-2 inhibitor initiators (n = 43 569) compared with traditional non-steroidal anti-inflammatory drug initiators (n = 411 616). The OR dropped to 0.81 (0.52, 1.27) upon adjustment for confounders recorded for all patients. When further considering three additional variables missing in 22% of the study population (smoking, alcohol consumption, body mass index), the OR was between 0.80 and 0.83 for the missing-category approach, the missing-indicator approach, single imputation by the most common category, multiple imputation by chained equations, and propensity score calibration. The OR was 0.65 (0.39, 1.09) and 0.67 (0.38, 1.16) for the unweighted and the inverse probability weighted complete-case analysis, respectively. Existing methods for handling partially missing confounder data require different assumptions and may produce different results. The unweighted complete-case analysis, the missing-category/indicator approach, and single imputation require often unrealistic assumptions and should be avoided. In this study, differences across methods were not substantial, likely due to relatively low proportion of missingness and weak confounding effect by the three additional variables upon adjustment for other variables. Copyright © 2012 John Wiley & Sons, Ltd.

Energy therapies in oncology nursing.

PubMed

Coakley, Amanda Bulette; Barron, Anne-Marie

2012-02-01

To review the published research related to the interventions of Reiki, Therapeutic Touch, and Healing Touch representing energy therapies in relation to oncology nursing. Peer-reviewed literature. There is growing evidence that energy therapies have a positive effect on symptoms associated with cancer. While there is need for further research, it is clear that an appreciation for the value of research methods beyond the randomized control trial is important. Energy therapies offer additional strategies for oncology nurses providing integrated nursing care to alleviate suffering and symptom distress of patients with cancer. Copyright © 2012 Elsevier Inc. All rights reserved.

Solving a methodological challenge in work stress evaluation with the Stress Assessment and Research Toolkit (StART): a study protocol.

PubMed

Guglielmi, Dina; Simbula, Silvia; Vignoli, Michela; Bruni, Ilaria; Depolo, Marco; Bonfiglioli, Roberta; Tabanelli, Maria Carla; Violante, Francesco Saverio

2013-06-22

Stress evaluation is a field of strong interest and challenging due to several methodological aspects in the evaluation process. The aim of this study is to propose a study protocol to test a new method (i.e., the Stress Assessment and Research Toolkit) to assess psychosocial risk factors at work. This method addresses several methodological issues (e.g., subjective vs. objective, qualitative vs quantitative data) by assessing work-related stressors using different kinds of data: i) organisational archival data (organisational indicators sheet); ii) qualitative data (focus group); iii) worker perception (questionnaire); and iv) observational data (observational checklist) using mixed methods research. In addition, it allows positive and negative aspects of work to be considered conjointly, using an approach that considers at the same time job demands and job resources. The integration of these sources of data can reduce the theoretical and methodological bias related to stress research in the work setting, allows researchers and professionals to obtain a reliable description of workers' stress, providing a more articulate vision of psychosocial risks, and allows a large amount of data to be collected. Finally, the implementation of the method ensures in the long term a primary prevention for psychosocial risk management in that it aims to reduce or modify the intensity, frequency or duration of organisational demands.

Solving a methodological challenge in work stress evaluation with the Stress Assessment and Research Toolkit (StART): a study protocol

PubMed Central

2013-01-01

Background Stress evaluation is a field of strong interest and challenging due to several methodological aspects in the evaluation process. The aim of this study is to propose a study protocol to test a new method (i.e., the Stress Assessment and Research Toolkit) to assess psychosocial risk factors at work. Design This method addresses several methodological issues (e.g., subjective vs. objective, qualitative vs quantitative data) by assessing work-related stressors using different kinds of data: i) organisational archival data (organisational indicators sheet); ii) qualitative data (focus group); iii) worker perception (questionnaire); and iv) observational data (observational checklist) using mixed methods research. In addition, it allows positive and negative aspects of work to be considered conjointly, using an approach that considers at the same time job demands and job resources. Discussion The integration of these sources of data can reduce the theoretical and methodological bias related to stress research in the work setting, allows researchers and professionals to obtain a reliable description of workers’ stress, providing a more articulate vision of psychosocial risks, and allows a large amount of data to be collected. Finally, the implementation of the method ensures in the long term a primary prevention for psychosocial risk management in that it aims to reduce or modify the intensity, frequency or duration of organisational demands. PMID:23799950

Visual soil evaluation - future research requirements

NASA Astrophysics Data System (ADS)

Emmet-Booth, Jeremy; Forristal, Dermot; Fenton, Owen; Ball, Bruce; Holden, Nick

2017-04-01

A review of Visual Soil Evaluation (VSE) techniques (Emmet-Booth et al., 2016) highlighted their established utility for soil quality assessment, though some limitations were identified; (1) The examination of aggregate size, visible intra-porosity and shape forms a key assessment criterion in almost all methods, thus limiting evaluation to structural form. The addition of criteria that holistically examine structure may be desirable. For example, structural stability can be indicated using dispersion tests or examining soil surface crusting, while the assessment of soil colour may indirectly indicate soil organic matter content, a contributor to stability. Organic matter assessment may also indicate structural resilience, along with rooting, earthworm numbers or shrinkage cracking. (2) Soil texture may influence results or impeded method deployment. Modification of procedures to account for extreme texture variation is desirable. For example, evidence of compaction in sandy or single grain soils greatly differs to that in clayey soils. Some procedures incorporate separate classification systems or adjust deployment based on texture. (3) Research into impacts of soil moisture content on VSE evaluation criteria is required. Criteria such as rupture resistance and shape may be affected by moisture content. It is generally recommended that methods are deployed on moist soils and quantification of influences of moisture variation on results is necessary. (4) Robust sampling strategies for method deployment are required. Dealing with spatial variation differs between methods, but where methods can be deployed over large areas, clear instruction on sampling is required. Additionally, as emphasis has been placed on the agricultural production of soil, so the ability of VSE for exploring structural quality in terms of carbon storage, water purification and biodiversity support also requires research. References Emmet-Booth, J.P., Forristal. P.D., Fenton, O., Ball, B.C. & Holden, N.M. 2016. A review of visual soil evaluation techniques for soil structure. Soil Use and Management, 32, 623-634.

A Good Death? Report of the Second Newcastle Meeting on Laboratory Animal Euthanasia

PubMed Central

Hawkins, Penny; Prescott, Mark J.; Carbone, Larry; Dennison, Ngaire; Johnson, Craig; Makowska, I. Joanna; Marquardt, Nicole; Readman, Gareth; Weary, Daniel M.; Golledge, Huw D. R.

2016-01-01

Simple Summary Millions of laboratory animals are killed each year worldwide. However, there is a lack of consensus regarding what methods of killing are humane for many species and stages of development. This report summarises research findings and discussions from an international meeting of experts and stakeholders, with recommendations to inform good practice for humane killing of mice, rats and zebrafish. It provides additional guidance and perspectives for researchers designing projects that involve euthanasing animals, researchers studying aspects of humane killing, euthanasia device manufacturers, regulators, and institutional ethics or animal care and use committees that wish to review local practice. Abstract Millions of laboratory animals are killed each year worldwide. There is an ethical, and in many countries also a legal, imperative to ensure those deaths cause minimal suffering. However, there is a lack of consensus regarding what methods of killing are humane for many species and stages of development. In 2013, an international group of researchers and stakeholders met at Newcastle University, United Kingdom to discuss the latest research and which methods could currently be considered most humane for the most commonly used laboratory species (mice, rats and zebrafish). They also discussed factors to consider when making decisions about appropriate techniques for particular species and projects, and priorities for further research. This report summarises the research findings and discussions, with recommendations to help inform good practice for humane killing. PMID:27563926

Identifying research priorities for health care priority setting: a collaborative effort between managers and researchers

PubMed Central

Smith, Neale; Mitton, Craig; Peacock, Stuart; Cornelissen, Evelyn; MacLeod, Stuart

2009-01-01

Background To date there has been relatively little published about how research priorities are set, and even less about methods by which decision-makers can be engaged in defining a relevant and appropriate research agenda. We report on a recent effort in British Columbia to have researchers and decision-makers jointly establish an agenda for future research into questions of resource allocation. Methods The researchers enlisted decision-maker partners from each of British Columbia's six health authorities. Three forums were held, at which researchers and decision-makers from various levels in the health authorities considered possible research areas related to three key focus areas: (1) generation and use of decision criteria and measurement of 'benefit' against such criteria; (2) identification of so-called 'disinvestment' opportunities; and (3) evaluation of the effectiveness of priority setting procedures. Detailed notes were taken from each forum and synthesized into a set of qualitative themes. Results Forum participants suggested that future research into healthcare priority setting would benefit from studies that were longitudinal, comparative, and/or interdisciplinary. As well, participants identified two broad theme areas in which specific research projects were deemed desirable. First, future research might usefully consider how formal priority setting and resource allocation projects are situated within a larger organizational and political context. Second, additional research efforts should be devoted to better understanding and improving the actual implementation of priority setting frameworks, particularly with respect to issues of change management and the resolution of impediments to action on recommendations for resource allocation. Conclusion We were able to validate the importance of initial areas posed to the group and observed emergence of additional concerns and directions of critical importance to these decision-makers at this time. It is likely that the results are broadly applicable to other healthcare contexts. The implementation of this research agenda in British Columbia will depend upon the ability of the researchers and decision-makers to develop particular projects that fit within the constraints of existing funding opportunities. The process of engagement itself had benefits in terms of connecting decision-makers with their peers and sparking increased interest in the use and refinement of priority setting frameworks. PMID:19754969

Assessing cervical dislocation as a humane euthanasia method in mice.

PubMed

Carbone, Larry; Carbone, Elizabeth T; Yi, Elizabeth M; Bauer, Diana B; Lindstrom, Krista A; Parker, John M; Austin, Jamie A; Seo, Youngho; Gandhi, Anisha D; Wilkerson, James D

2012-05-01

Research investigators often choose to euthanize mice by cervical dislocation (CD) when other methods would interfere with the aims of a research project. Others choose CD to assure death in mice treated with injected or inhaled euthanasia agents. CD was first approved for mouse euthanasia in 1972 by the AVMA Panel on Euthanasia, although scientific assessment of its humaneness has been sparse. Here we compared 4 methods of spinal dislocation--3 targeting the cervical area (CD) and one the thoracic region--in regard to time to respiratory arrest in anesthetized mice. Of the 81 mice that underwent CD by 1 of the 3 methods tested, 17 (21%) continued to breathe, and euthanasia was scored as unsuccessful. Postmortem radiography revealed cervical spinal lesions in 5 of the 17 cases of unsuccessful CD euthanasia. In addition, 63 of the 64 successfully euthanized mice had radiographically visible lesions in the high cervical or atlantooccipital region. In addition, 50 of 64 (78%) mice euthanized successfully had radiographically visible thoracic or lumbar lesions or both. Intentionally creating a midthoracic dislocation in anesthetized mice failed to induce respiratory arrest and death in any of the 18 mice subjected to that procedure. We conclude that CD of mice holds the potential for unsuccessful euthanasia, that anesthesia could be valuable for CD skills training and assessment, and that postmortem radiography has minimal promise in quality-control assessments.

Assessing Cervical Dislocation as a Humane Euthanasia Method in Mice

PubMed Central

Carbone, Larry; Carbone, Elizabeth T; Yi, Elizabeth M; Bauer, Diana B; Lindstrom, Krista A; Parker, John M; Austin, Jamie A; Seo, Youngho; Gandhi, Anisha D; Wilkerson, James D

2012-01-01

Research investigators often choose to euthanize mice by cervical dislocation (CD) when other methods would interfere with the aims of a research project. Others choose CD to assure death in mice treated with injected or inhaled euthanasia agents. CD was first approved for mouse euthanasia in 1972 by the AVMA Panel on Euthanasia, although scientific assessment of its humaneness has been sparse. Here we compared 4 methods of spinal dislocation–3 targeting the cervical area (CD) and one the thoracic region–in regard to time to respiratory arrest in anesthetized mice. Of the 81 mice that underwent CD by 1 of the 3 methods tested, 17 (21%) continued to breathe, and euthanasia was scored as unsuccessful. Postmortem radiography revealed cervical spinal lesions in 5 of the 17 cases of unsuccessful CD euthanasia. In addition, 63 of the 64 successfully euthanized mice had radiographically visible lesions in the high cervical or atlantooccipital region. In addition, 50 of 64 (78%) mice euthanized successfully had radiographically visible thoracic or lumbar lesions or both. Intentionally creating a midthoracic dislocation in anesthetized mice failed to induce respiratory arrest and death in any of the 18 mice subjected to that procedure. We conclude that CD of mice holds the potential for unsuccessful euthanasia, that anesthesia could be valuable for CD skills training and assessment, and that postmortem radiography has minimal promise in quality-control assessments. PMID:22776194

Reflecting on the use of photo elicitation with children.

PubMed

Whiting, Lisa S

2015-01-01

To reflect on the use of photo elicitation as a data collection method when conducting research with primary school age children (nine to 11 years). There is recognition that children feel an affinity with the visual medium; as a result, visual methods can be useful when conducting research with children. Photo elicitation is one such method, but there has been little discussion of its use with primary school children within a health context. This paper considers the main issues that researchers should consider. This paper draws on a research study conducted by the author that used an ethnographic approach and photo elicitation to identify the assets underpinning children's wellbeing. A reflective discussion is used to highlight issues relating to the use of photo elicitation to collect data from primary school children. Photo elicitation is not without its challenges: it creates additional ethical considerations, and can be more time-consuming and expensive. However, children value the opportunity to be involved in research and have their opinions sought, and photo elicitation provides a method of collecting data that is appropriate for children's developmental and cognitive maturational stages. Photo elicitation can be a positive experience for children, and one that is not only fun and engaging, but that is also empowering and valuing of their contributions. Research that uses photo elicitation needs to be carefully planned to ensure that the study is supported appropriately. The visual process can offer a unique insight into children's lives that allows health professionals to deepen their understanding of children's experiences.

Understanding Engagement in HIV Risk and Prevention Research Among Black Young Men Who Have Sex with Men and Transgender Women in the District of Columbia

PubMed Central

Houston, Ebony; Peterson, James; Kuo, Irene; Magnus, Manya

2016-01-01

Abstract Purpose: To develop optimal methods to study sexual health among black young men who have sex with men and transgender women (BYMSM/TW). Methods: We conducted a mixed-methods prospective study to identify recruitment and retention strategies for BYMSM/TW (age 16–21) in Washington D.C., and describe HIV risk behaviors and context. Results: Incentivized peer referral was highly productive, and 60% of BYMSM/TW were retained for 3 months. Participants reported high levels of sexual risk, homophobia, racism, and maternal support. Conclusion: BYMSM/TW studies should utilize a combination of peer-based, in-person, and technology-based recruiting strategies. Additional research is needed to leverage mobile technology and social media to enhance retention. PMID:26651365

Project JOVE. [microgravity experiments and applications

NASA Technical Reports Server (NTRS)

Lyell, M. J.

1994-01-01

The goal of this project is to investigate new areas of research pertaining to free surface-interface fluids mechanics and/or microgravity which have potential commercial applications. This paper presents an introduction to ferrohydrodynamics (FHD), and discusses some applications. Also, computational methods for solving free surface flow problems are presented in detail. Both have diverse applications in industry and in microgravity fluids applications. Three different modeling schemes for FHD flows are addressed and the governing equations, including Maxwell's equations, are introduced. In the area of computational modeling of free surface flows, both Eulerian and Lagrangian schemes are discussed. The state of the art in computational methods applied to free surface flows is elucidated. In particular, adaptive grids and re-zoning methods are discussed. Additional research results are addressed and copies of the publications produced under the JOVE Project are included.

The Use of AC-DC-AC Methods in Assessing Corrosion Resistance Performance of Coating Systems for Magnesium Alloys

NASA Astrophysics Data System (ADS)

McCune, Robert C.; Upadhyay, Vinod; Wang, Yar-Ming; Battocchi, Dante

The potential utility of AC-DC-AC electrochemical methods in comparative measures of corrosion-resisting coating system performance for magnesium alloys under consideration for the USAMP "Magnesium Front End Research and Development" project was previously shown in this forum [1]. Additional studies of this approach using statistically-designed experiments have been conducted with focus on alloy types, pretreatment, topcoat material and topcoat thickness as the variables. Additionally, sample coupons made for these designed experiments were also subjected to a typical automotive cyclic corrosion test cycle (SAE J2334) as well as ASTM B117 for comparison of relative performance. Results of these studies are presented along with advantages and limitations of the proposed methodology.

How to Improve the Mastery of Students’ Concept on Photosynthesis Topic?

NASA Astrophysics Data System (ADS)

Ulfa, K.; Anggraeni, S.; Supriatno, B.

2017-09-01

The PPDP learning strategy in this research is the acronym of Practicum method, Presentation-discussion method, Demonstration method, and Presentation-discussion method. This study aims to describe the effect of applying PPDP learning strategies to mastery of high school students’ concepts on photosynthesis topic. The research method is a weak experiment, with the research design “The One-Group Pretest-Postetst Design”. The implementation of the study involved 35 students in one of the high schools in the city of Palembang. The research instrument used is in the form of test equipment, assessment rubric and questionnaire. Data were analyzed using Microsoft Excel and SPSS 24 Program. The statistical result showed that PPDP learning strategy had an effect on improving conceptual and Effective on the achievement of the value on the minimum criteria set by the school. This is due to the transformation of knowledge from hands-on to minds-on through the discovery of facts about the concept of photosynthesis. This fact leads to the construction of further understanding through cognitive sharing when the activities of the discussions formed similarity and consolidation of the concept of photosynthesis intact. In addition, demonstration activities also cause students’ logic of thinking to develop through observation of factors that may affect the rate of photosynthesis. This PPDP learning strategy can be utilized by teachers in explaining photosynthetic topic.

Preliminary results from the High Speed Airframe Integration Research project

NASA Technical Reports Server (NTRS)

Coen, Peter G.; Sobieszczanski-Sobieski, Jaroslaw; Dollyhigh, Samuel M.

1992-01-01

A review is presented of the accomplishment of the near term objectives of developing an analysis system and optimization methods during the first year of the NASA Langley High Speed Airframe Integration Research (HiSAIR) project. The characteristics of a Mach 3 HSCT transport have been analyzed utilizing the newly developed process. In addition to showing more detailed information about the aerodynamic and structural coupling for this type of vehicle, this exercise aided in further refining the data requirements for the analysis process.

Cancer survival: an overview of measures, uses, and interpretation.

PubMed

Mariotto, Angela B; Noone, Anne-Michelle; Howlader, Nadia; Cho, Hyunsoon; Keel, Gretchen E; Garshell, Jessica; Woloshin, Steven; Schwartz, Lisa M

2014-11-01

Survival statistics are of great interest to patients, clinicians, researchers, and policy makers. Although seemingly simple, survival can be confusing: there are many different survival measures with a plethora of names and statistical methods developed to answer different questions. This paper aims to describe and disseminate different survival measures and their interpretation in less technical language. In addition, we introduce templates to summarize cancer survival statistic organized by their specific purpose: research and policy versus prognosis and clinical decision making. Published by Oxford University Press 2014.

Cancer Survival: An Overview of Measures, Uses, and Interpretation

PubMed Central

Noone, Anne-Michelle; Howlader, Nadia; Cho, Hyunsoon; Keel, Gretchen E.; Garshell, Jessica; Woloshin, Steven; Schwartz, Lisa M.

2014-01-01

Survival statistics are of great interest to patients, clinicians, researchers, and policy makers. Although seemingly simple, survival can be confusing: there are many different survival measures with a plethora of names and statistical methods developed to answer different questions. This paper aims to describe and disseminate different survival measures and their interpretation in less technical language. In addition, we introduce templates to summarize cancer survival statistic organized by their specific purpose: research and policy versus prognosis and clinical decision making. PMID:25417231

Three Essays in Economics Education: An Overview of the Research and Two Studies on the Effectiveness of Alternative Teaching Methods and the Influence of Ethics in the Classroom on Economics Knowledge and Political Philosophy

ERIC Educational Resources Information Center

Malek, Ninos Pierre

2010-01-01

Economics education has been a topic of research interest to many economists. In addition, the philosophical and ethical content of economics and its role in economics education has been an issue of discussion. Chapter 1 of my dissertation addresses what topics should be ignored in a principles of microeconomics class, what the goal of the…

Teaching in Medical Education | Center for Cancer Research

Cancer.gov

Many postdoctoral fellows are considering an academic career at a medical school. In addition to conducting research, new faculty members must learn effective teaching methodologies. This course will focus on good teaching practices, including basic strategies for developing and organizing a course. The purpose of the "Teaching in Medical Education (TIME)" course is to increase the scientist's ability to teach in medical education. The course will provide basic knowledge in teaching methods, course planning, writing a syllabus and developing examinations.

Data-Driven Approach To Determine Popular Proteins for Targeted Proteomics Translation of Six Organ Systems.

PubMed

Lam, Maggie P Y; Venkatraman, Vidya; Xing, Yi; Lau, Edward; Cao, Quan; Ng, Dominic C M; Su, Andrew I; Ge, Junbo; Van Eyk, Jennifer E; Ping, Peipei

2016-11-04

Amidst the proteomes of human tissues lie subsets of proteins that are closely involved in conserved pathophysiological processes. Much of biomedical research concerns interrogating disease signature proteins and defining their roles in disease mechanisms. With advances in proteomics technologies, it is now feasible to develop targeted proteomics assays that can accurately quantify protein abundance as well as their post-translational modifications; however, with rapidly accumulating number of studies implicating proteins in diseases, current resources are insufficient to target every protein without judiciously prioritizing the proteins with high significance and impact for assay development. We describe here a data science method to prioritize and expedite assay development on high-impact proteins across research fields by leveraging the biomedical literature record to rank and normalize proteins that are popularly and preferentially published by biomedical researchers. We demonstrate this method by finding priority proteins across six major physiological systems (cardiovascular, cerebral, hepatic, renal, pulmonary, and intestinal). The described method is data-driven and builds upon the collective knowledge of previous publications referenced on PubMed to lend objectivity to target selection. The method and resulting popular protein lists may also be useful for exploring biological processes associated with various physiological systems and research topics, in addition to benefiting ongoing efforts to facilitate the broad translation of proteomics technologies.

Research on Mechanisms and Controlling Methods of Macro Defects in TC4 Alloy Fabricated by Wire Additive Manufacturing.

PubMed

Ji, Lei; Lu, Jiping; Tang, Shuiyuan; Wu, Qianru; Wang, Jiachen; Ma, Shuyuan; Fan, Hongli; Liu, Changmeng

2018-06-28

Wire feeding additive manufacturing (WFAM) has broad application prospects because of its advantages of low cost and high efficiency. However, with the mode of lateral wire feeding, including wire and laser additive manufacturing, gas tungsten arc additive manufacturing etc., it is easy to generate macro defects on the surface of the components because of the anisotropy of melted wire, which limits the promotion and application of WFAM. In this work, gas tungsten arc additive manufacturing with lateral wire feeding is proposed to investigate the mechanisms of macro defects. The results illustrate that the defect forms mainly include side spatters, collapse, poor flatness, and unmelted wire. It was found that the heat input, layer thickness, tool path, and wire curvature can have an impact on the macro defects. Side spatters are the most serious defects, mainly because the droplets cannot be transferred to the center of the molten pool in the lateral wire feeding mode. This research indicates that the macro defects can be controlled by optimizing the process parameters. Finally, block parts without macro defects were fabricated, which is meaningful for the further application of WFAM.

Detecting and removing multiplicative spatial bias in high-throughput screening technologies.

PubMed

Caraus, Iurie; Mazoure, Bogdan; Nadon, Robert; Makarenkov, Vladimir

2017-10-15

Considerable attention has been paid recently to improve data quality in high-throughput screening (HTS) and high-content screening (HCS) technologies widely used in drug development and chemical toxicity research. However, several environmentally- and procedurally-induced spatial biases in experimental HTS and HCS screens decrease measurement accuracy, leading to increased numbers of false positives and false negatives in hit selection. Although effective bias correction methods and software have been developed over the past decades, almost all of these tools have been designed to reduce the effect of additive bias only. Here, we address the case of multiplicative spatial bias. We introduce three new statistical methods meant to reduce multiplicative spatial bias in screening technologies. We assess the performance of the methods with synthetic and real data affected by multiplicative spatial bias, including comparisons with current bias correction methods. We also describe a wider data correction protocol that integrates methods for removing both assay and plate-specific spatial biases, which can be either additive or multiplicative. The methods for removing multiplicative spatial bias and the data correction protocol are effective in detecting and cleaning experimental data generated by screening technologies. As our protocol is of a general nature, it can be used by researchers analyzing current or next-generation high-throughput screens. The AssayCorrector program, implemented in R, is available on CRAN. makarenkov.vladimir@uqam.ca. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Distance measures and optimization spaces in quantitative fatty acid signature analysis

USGS Publications Warehouse

Bromaghin, Jeffrey F.; Rode, Karyn D.; Budge, Suzanne M.; Thiemann, Gregory W.

2015-01-01

Quantitative fatty acid signature analysis has become an important method of diet estimation in ecology, especially marine ecology. Controlled feeding trials to validate the method and estimate the calibration coefficients necessary to account for differential metabolism of individual fatty acids have been conducted with several species from diverse taxa. However, research into potential refinements of the estimation method has been limited. We compared the performance of the original method of estimating diet composition with that of five variants based on different combinations of distance measures and calibration-coefficient transformations between prey and predator fatty acid signature spaces. Fatty acid signatures of pseudopredators were constructed using known diet mixtures of two prey data sets previously used to estimate the diets of polar bears Ursus maritimus and gray seals Halichoerus grypus, and their diets were then estimated using all six variants. In addition, previously published diets of Chukchi Sea polar bears were re-estimated using all six methods. Our findings reveal that the selection of an estimation method can meaningfully influence estimates of diet composition. Among the pseudopredator results, which allowed evaluation of bias and precision, differences in estimator performance were rarely large, and no one estimator was universally preferred, although estimators based on the Aitchison distance measure tended to have modestly superior properties compared to estimators based on the Kullback-Leibler distance measure. However, greater differences were observed among estimated polar bear diets, most likely due to differential estimator sensitivity to assumption violations. Our results, particularly the polar bear example, suggest that additional research into estimator performance and model diagnostics is warranted.

“Towards building better linkages between aqueous phase ...

EPA Pesticide Factsheets

Currently, CMAQ’s aqueous phase chemistry routine (AQCHEM-base) assumes Henry’s Law equilibrium and employs a forward Euler method to solve a small set of oxidation equations, considering the additional processes of aitken scavenging and wet deposition in series and employing a bisection method to calculate H+ concentrations. With potentially hundreds of reactions that may be important in cloud water and only seven reactions in the current model, expansion of the existing mechanism is an important area of investigation. However, with the current mechanism hardwired into the solver code, the module is difficult to expand with additional chemistry. It also ignores the impacts of mass transfer limitations on cloud chemistry which may be significant. Here, the Kinetic PreProcessor has been applied to generate a Rosenbrock solver for the CMAQ v5.0.1 aqueous phase chemistry mechanism. The module has been updated to simultaneously solve kinetic mass transfer between the phases, dissociation/association, chemical kinetics, Aitken scavenging, and wet deposition. This will allow for easier expansion of the chemical mechanism in the future and a better link between aqueous phase chemistry and droplet microphysics. The National Exposure Research Laboratory (NERL) Atmospheric Modeling and Analysis Division (AMAD) conducts research in support of EPA mission to protect human health and the environment. AMAD research program is engaged in developing and evaluating pre

A pragmatic method for transforming clinical research data from the research electronic data capture "REDCap" to Clinical Data Interchange Standards Consortium (CDISC) Study Data Tabulation Model (SDTM): Development and evaluation of REDCap2SDTM.

PubMed

Yamamoto, Keiichi; Ota, Keiko; Akiya, Ippei; Shintani, Ayumi

2017-06-01

The Clinical Data Interchange Standards Consortium (CDISC) Study Data Tabulation Model (SDTM) can be used for new drug application studies as well as secondarily for creating a clinical research data warehouse to leverage clinical research study data across studies conducted within the same disease area. However, currently not all clinical research uses Clinical Data Acquisition Standards Harmonization (CDASH) beginning in the set-up phase of the study. Once already initiated, clinical studies that have not utilized CDASH are difficult to map in the SDTM format. In addition, most electronic data capture (EDC) systems are not equipped to export data in SDTM format; therefore, in many cases, statistical software is used to generate SDTM datasets from accumulated clinical data. In order to facilitate efficient secondary use of accumulated clinical research data using SDTM, it is necessary to develop a new tool to enable mapping of information for SDTM, even during or after the clinical research. REDCap is an EDC system developed by Vanderbilt University and is used globally by over 2100 institutions across 108 countries. In this study, we developed a simulated clinical trial to evaluate a tool called REDCap2SDTM that maps information in the Field Annotation of REDCap to SDTM and executes data conversion, including when data must be pivoted to accommodate the SDTM format, dynamically, by parsing the mapping information using R. We confirmed that generating SDTM data and the define.xml file from REDCap using REDCap2SDTM was possible. Conventionally, generation of SDTM data and the define.xml file from EDC systems requires the creation of individual programs for each clinical study. However, our proposed method can be used to generate this data and file dynamically without programming because it only involves entering the mapping information into the Field Annotation, and additional data into specific files. Our proposed method is adaptable not only to new drug application studies but also to all types of research, including observational and public health studies. Our method is also adaptable to clinical data collected with CDASH at the beginning of a study in non-standard format. We believe that this tool will reduce the workload of new drug application studies and will support data sharing and reuse of clinical research data in academia. Copyright © 2017 Elsevier Inc. All rights reserved.

Flight Test Results of a GPS-Based Pitot-Static Calibration Method Using Output-Error Optimization for a Light Twin-Engine Airplane

NASA Technical Reports Server (NTRS)

Martos, Borja; Kiszely, Paul; Foster, John V.

2011-01-01

As part of the NASA Aviation Safety Program (AvSP), a novel pitot-static calibration method was developed to allow rapid in-flight calibration for subscale aircraft while flying within confined test areas. This approach uses Global Positioning System (GPS) technology coupled with modern system identification methods that rapidly computes optimal pressure error models over a range of airspeed with defined confidence bounds. This method has been demonstrated in subscale flight tests and has shown small 2- error bounds with significant reduction in test time compared to other methods. The current research was motivated by the desire to further evaluate and develop this method for full-scale aircraft. A goal of this research was to develop an accurate calibration method that enables reductions in test equipment and flight time, thus reducing costs. The approach involved analysis of data acquisition requirements, development of efficient flight patterns, and analysis of pressure error models based on system identification methods. Flight tests were conducted at The University of Tennessee Space Institute (UTSI) utilizing an instrumented Piper Navajo research aircraft. In addition, the UTSI engineering flight simulator was used to investigate test maneuver requirements and handling qualities issues associated with this technique. This paper provides a summary of piloted simulation and flight test results that illustrates the performance and capabilities of the NASA calibration method. Discussion of maneuver requirements and data analysis methods is included as well as recommendations for piloting technique.

Qualitative research in nutrition and dietetics: data collection issues.

PubMed

Draper, A; Swift, J A

2011-02-01

The wide scope of qualitative enquiry presents the researcher with a number of choices regarding data collection and sampling. Selecting data collection and sampling techniques can therefore be somewhat daunting, particularly because, often, there is no single, universally accepted 'correct' option. Appropriate research methods are, however, crucial to ensure high-quality research. This review, the second in the series, provides an overview of the principal techniques of data collection and sampling that may be used for qualitative research in nutrition and dietetics. In addition, it describes a process for choosing appropriate data collection and sampling methods that considers the extent to which they provide data that answers the research question(s) and are compatible with the philosophical assumptions about ontology, epistemology and methodology that underpin the overall design of a study. Finally, it discusses the central role that the researcher plays in qualitative data collection and encourages researchers to acknowledge and reflect upon their impact on the data. Other reviews in this series provide a model for embarking on a qualitative research project in nutrition and dietetics, an overview of the principal techniques of data analysis and quality assessment of this kind of research, and some practical advice relevant to nutrition and dietetics, along with glossaries of key terms. © 2010 The Authors. Journal compilation © 2010 The British Dietetic Association Ltd.

Fuzzy set methods for object recognition in space applications

NASA Technical Reports Server (NTRS)

Keller, James M.

1991-01-01

During the reporting period, the development of the theory and application of methodologies for decision making under uncertainty was addressed. Two subreports are included; the first on properties of general hybrid operators, while the second considers some new research on generalized threshold logic units. In the first part, the properties of the additive gamma-model, where the intersection part is first considered to be the product of the input values and the union part is obtained by an extension of De Morgan's law to fuzzy sets, is explored. Then the Yager's class of union and intersection is used in the additive gamma-model. The inputs are weighted to some power that represents their importance and thus their contribution to the compensation process. In the second part, the extension of binary logic synthesis methods to multiple valued logic synthesis methods to enable the synthesis of decision networks when the input/output variables are not binary is discussed.

An Inventory of Methods for the Assessment of Additive Increased Addictiveness of Tobacco Products

PubMed Central

van de Nobelen, Suzanne; Kienhuis, Anne S.

2016-01-01

Background: Cigarettes and other forms of tobacco contain the addictive drug nicotine. Other components, either naturally occurring in tobacco or additives that are intentionally added during the manufacturing process, may add to the addictiveness of tobacco products. As such, these components can make cigarette smokers more easily and heavily dependent. Efforts to regulate tobacco product dependence are emerging globally. Additives that increase tobacco dependence will be prohibited under the new European Tobacco Product Directive. Objective: This article provides guidelines and recommendations for developing a regulatory strategy for assessment of increase in tobacco dependence due to additives. Relevant scientific literature is summarized and criteria and experimental studies that can define increased dependence of tobacco products are described. Conclusions: Natural tobacco smoke is a very complex matrix of components, therefore analysis of the contribution of an additive or a combination of additives to the level of dependence on this product is challenging. We propose to combine different type of studies analyzing overall tobacco product dependence potential and the functioning of additives in relation to nicotine. By using a combination of techniques, changes associated with nicotine dependence such as behavioral, physiological, and neurochemical alterations can be examined to provide sufficient information. Research needs and knowledge gaps will be discussed and recommendations will be made to translate current knowledge into legislation. As such, this article aids in implementation of the Tobacco Product Directive, as well as help enable regulators and researchers worldwide to develop standards to reduce dependence on tobacco products. Implications: This article provides an overall view on how to assess tobacco product constituents for their potential contribution to use and dependence. It provides guidelines that help enable regulators worldwide to develop standards to reduce dependence on tobacco products and guide researches to set research priorities on this topic. PMID:26817491

Reported credibility techniques in higher education evaluation studies that use qualitative methods: A research synthesis.

PubMed

Liao, Hongjing; Hitchcock, John

2018-06-01

This synthesis study examined the reported use of credibility techniques in higher education evaluation articles that use qualitative methods. The sample included 118 articles published in six leading higher education evaluation journals from 2003 to 2012. Mixed methods approaches were used to identify key credibility techniques reported across the articles, document the frequency of these techniques, and describe their use and properties. Two broad sets of techniques were of interest: primary design techniques (i.e., basic), such as sampling/participant recruitment strategies, data collection methods, analytic details, and additional qualitative credibility techniques (e.g., member checking, negative case analyses, peer debriefing). The majority of evaluation articles reported use of primary techniques although there was wide variation in the amount of supporting detail; most of the articles did not describe the use of additional credibility techniques. This suggests that editors of evaluation journals should encourage the reporting of qualitative design details and authors should develop strategies yielding fuller methodological description. Copyright © 2018 Elsevier Ltd. All rights reserved.

Children's Adjustment Problems in Families Characterized by Men's Severe Violence toward Women: Does Other Family Violence Matter?

ERIC Educational Resources Information Center

McDonald, Renee; Jouriles, Ernest N.; Tart, Candyce D.; Minze, Laura C.

2009-01-01

Objective: This research examined whether additional forms of family violence (partner-child aggression, mother-child aggression, and women's intimate partner violence [IPV]) contribute to children's adjustment problems in families characterized by men's severe violence toward women. Methods: Participants were 258 children and their mothers…

Research Committee Issues Brief: Examining Communication and Interaction in Online Teaching

ERIC Educational Resources Information Center

Cavanaugh, Cathy; Barbour, Michael; Brown, Regina; Diamond, Daryl; Lowes, Susan; Powell, Allison; Rose, Ray; Scheick, Amy; Scribner, Donna; Van der Molen, Julia

2009-01-01

Online teaching is a complex professional practice. In addition to their content knowledge and pedagogical skill, online teachers must be qualified in methods of teaching the content online and have experience in online learning. This document examines some of the aspects of online teaching, specifically those related to communication and…

Alternate Methods for Disposal of Nitrocellulose Fines

DTIC Science & Technology

1985-07-22

13 Microwave ..................................... 14 Plasma ........................................ 14V Laser pyrolysis...would either be backflushed (not expected to be too successful) or replaced. Microwave Thermal Degradation The use of microwave heating has been...with microwave heating, new designs would be needed if a practical, cost effective system is to be developed. Considerable additional research would be

An Investigation of Maternal Emotion Socialization Behaviors, Children's Self-Perceptions, and Social Problem-Solving Skills

ERIC Educational Resources Information Center

Ozkan, Hurside Kubra; Aksoy, Ayse Belgin

2017-01-01

Purpose: The present study aims to investigate maternal emotion socialization, children's self-perception, and social problem-solving skills. In addition, this study describes the association between the levels of children's self-perception and social problem-solving skills. Research Methods: This is a quantitative study adopting a relational…

75 FR 53734 - Reports, Forms, and Recordkeeping Requirements; Agency Information Collection Activity Under OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-01

... Restraint Anchorage Systems), in order to provide another, easier method of attaching a child restraint to... take to improve child passenger safety. In addition, NTHSA will publish the findings of this research... observational data on correct and incorrect use of child restraint systems in passenger vehicles, as well as...

Moving the Starting Line through Prior Learning Assessment (PLA). Research Brief

ERIC Educational Resources Information Center

Council for Adult and Experiential Learning (NJ1), 2011

2011-01-01

Prior learning assessment (PLA) methods can help adult students earn college credit for what they already know. PLA can be an important offering by postsecondary degree programs because it can save students time and money. In addition, the Council for Adult and Experiential Learning's (CAEL's) "Fueling the Race to Postsecondary Success"…

The Impact of Sample Size and Other Factors When Estimating Multilevel Logistic Models

ERIC Educational Resources Information Center

Schoeneberger, Jason A.

2016-01-01

The design of research studies utilizing binary multilevel models must necessarily incorporate knowledge of multiple factors, including estimation method, variance component size, or number of predictors, in addition to sample sizes. This Monte Carlo study examined the performance of random effect binary outcome multilevel models under varying…

Comparing Learning Performance of Students Using Algorithm Visualizations Collaboratively on Different Engagement Levels

ERIC Educational Resources Information Center

Laakso, Mikko-Jussi; Myller, Niko; Korhonen, Ari

2009-01-01

In this paper, two emerging learning and teaching methods have been studied: collaboration in concert with algorithm visualization. When visualizations have been employed in collaborative learning, collaboration introduces new challenges for the visualization tools. In addition, new theories are needed to guide the development and research of the…

Teacher Perceptions and Benefits of Student-Led Conferencing in Southern and Central Illinois Elementary Schools

ERIC Educational Resources Information Center

West, Kelly L.

2017-01-01

Student-led conferences are an alternative method of reporting progress to parents. This qualitative phenomenological research study was conducted in order to examine elementary teachers' perceptions of student-led conferences in comparison to traditional parent-teacher conferences in Central and Southern Illinois. Additionally, the study examined…

2, 4, 8: Doubling Snakes, Caterpillars and Goats Made Easy!

ERIC Educational Resources Information Center

Kartambis, Kathy

2007-01-01

Research has established that children's development of addition and subtraction skills progresses through a hierarchy of strategies that begin with counting-by-one methods through to flexible mental strategies using a combination of knowledge of basic facts and understanding of place value. An important transition point is the shift from the…

Methodical Approaches to Teaching of Computer Modeling in Computer Science Course

ERIC Educational Resources Information Center

Rakhimzhanova, B. Lyazzat; Issabayeva, N. Darazha; Khakimova, Tiyshtik; Bolyskhanova, J. Madina

2015-01-01

The purpose of this study was to justify of the formation technique of representation of modeling methodology at computer science lessons. The necessity of studying computer modeling is that the current trends of strengthening of general education and worldview functions of computer science define the necessity of additional research of the…

Evaluating and Improving the Mathematics Teaching-Learning Process through Metacognition

ERIC Educational Resources Information Center

Desoete, Annemie

2007-01-01

Introduction: Despite all the emphasis on metacognition, researchers currently use different techniques to assess metacognition. The purpose of this contribution is to help to clarify some of the paradigms on the evaluation of metacognition. In addition the paper reviews studies aiming to improve the learning process through metacognition. Method:…

SERDP and ESTCP Technical Exchange Meeting on DoD Operational Range Assessment and Management Approaches

DTIC Science & Technology

2007-10-01

Development of Phytostabilization/ Phytoremediation Growing Guides for Varying Geographic and Range Use Conditions...Demonstration Needs Critical Priority High Priority Development of Phytostabilization/ Phytoremediation Growing Guides for Varying Geographic and...several additional management and mitigation methods are in varying stages of research and development: surface soil amendments, phytoremediation , and

Testing and Further Development of Improved Etches and Etching Methods for the Analysis of Bridgman Grown Semiconductor Crystals with an Emphasis on Lead-Tin-Telluride

NASA Technical Reports Server (NTRS)

Barber, Patrick G.

1998-01-01

The goals outlined for the research project for this year have been completed, and the following supporting documentation is attached: 1. A copy of the proposal outlining the principal goals: (a) Improve the characterization of semiconductor crystals through new etches and etching procedures. (b) Developed a novel voltammetric method to characterize semiconductor crystals as a result of searching for improved etches for lead-tin-telluride. (c) Presented paper at ACCG- 10. (d) Prepared manuscripts for publication. Completed additional testing suggested by reviewers and re-submitted manuscripts. (e) Worked with an undergraduate student on this project to provide her an opportunity to have a significant research experience prior to graduation. 2. In addition to the anticipated goals the following were also accomplished: (a) Submitted the newly developed procedures for consideration as a patent or a NASA Tech Brief. (b) Submitted a paper for presentation at the forthcoming ICCG- 12 conference. 3. A copy of the final draft of the publication as submitted to the editors of the Journal of Crystal Growth.

Effects of nisin on the antimicrobial activity of d-limonene and its nanoemulsion.

PubMed

Zhang, Zijie; Vriesekoop, Frank; Yuan, Qipeng; Liang, Hao

2014-05-01

d-Limonene has been considered to be a safer alternative compared to synthetic antimicrobial food additives. However, its hydrophobic and oxidative nature has limited its application in foods. The purpose of this research was to study effects of nisin on the antimicrobial activity of d-limonene and its nanoemulsion and develop a novel antimicrobial delivery system by combining the positive effect of these two antibacterial agents at the same time. By the checkerboard method, both the synergistic and additive effects of d-limonene and nisin were found against four selected food-related microorganisms. Then, d-limonene nanoemulsion with or without nisin was prepared by catastrophic phase inversion method, which has shown good droplet size and stability. The positive effects and outstanding antimicrobial activity of d-limonene nanoemulsion with nisin were confirmed by MICs comparison, scanning electron microscopy and determination of cell constituents released. Overall, the research described in the current article would be helpful in developing a more effective antimicrobial system for the production and preservation of foods. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Analysis of the Space Shuttle main engine simulation

NASA Technical Reports Server (NTRS)

Deabreu-Garcia, J. Alex; Welch, John T.

1993-01-01

This is a final report on an analysis of the Space Shuttle Main Engine Program, a digital simulator code written in Fortran. The research was undertaken in ultimate support of future design studies of a shuttle life-extending Intelligent Control System (ICS). These studies are to be conducted by NASA Lewis Space Research Center. The primary purpose of the analysis was to define the means to achieve a faster running simulation, and to determine if additional hardware would be necessary for speeding up simulations for the ICS project. In particular, the analysis was to consider the use of custom integrators based on the Matrix Stability Region Placement (MSRP) method. In addition to speed of execution, other qualities of the software were to be examined. Among these are the accuracy of computations, the useability of the simulation system, and the maintainability of the program and data files. Accuracy involves control of truncation error of the methods, and roundoff error induced by floating point operations. It also involves the requirement that the user be fully aware of the model that the simulator is implementing.

Microencapsulation of Natural Anthocyanin from Purple Rosella Calyces by Freeze Drying

NASA Astrophysics Data System (ADS)

Nafiunisa, A.; Aryanti, N.; Wardhani, D. H.; Kumoro, A. C.

2017-11-01

Anthocyanin extract in powder form will improve its use since the powder is easier to store and more applicable. Microencapsulation method is introduced as an efficient way for protecting pigment such as anthocyanin. This research was aimed to characterise anthocyanin encapsulated products prepared from purple Roselle calyces by freeze drying. The liquid anthocyanin extracts from ultrasound-assisted extraction were freeze-dried with and without the addition of 10% w/w maltodextrins as a carrier and coating agents. The quality attributes of the powders were characterised by their colour intensity, water content, and solubility. Analysis of encapsulated material was performed for the powder added by maltodextrin. The stability of the microencapsulated pigment in solution form was determined for 11 days. Total anthocyanin content was observed through pH differential method. The results of the colour intensity analysis confirm that the product with maltodextrin addition has more intense colour with L* value of 29.69 a* value of 54.29 and b* value of 8.39. The result with the addition of maltodextrin has less moisture content and more soluble in water. It is verified that better results were obtained for powder with maltodextrin addition. Anthocyanin in the powder form with maltodextrin addition exhibits higher stability even after 11 days. In conclusion, the microencapsulation of anthocyanin with maltodextrin as a carrier and coating agent presented a potential method to produce anthocyanin powder from purple Roselle.

Recognition of a person named entity from the text written in a natural language

NASA Astrophysics Data System (ADS)

Dolbin, A. V.; Rozaliev, V. L.; Orlova, Y. A.

2017-01-01

This work is devoted to the semantic analysis of texts, which were written in a natural language. The main goal of the research was to compare latent Dirichlet allocation and latent semantic analysis to identify elements of the human appearance in the text. The completeness of information retrieval was chosen as the efficiency criteria for methods comparison. However, it was insufficient to choose only one method for achieving high recognition rates. Thus, additional methods were used for finding references to the personality in the text. All these methods are based on the created information model, which represents person’s appearance.

A Meta-Analysis of Single-Subject Research on Behavioral Momentum to Enhance Success in Students with Autism.

PubMed

Cowan, Richard J; Abel, Leah; Candel, Lindsay

2017-05-01

We conducted a meta-analysis of single-subject research studies investigating the effectiveness of antecedent strategies grounded in behavioral momentum for improving compliance and on-task performance for students with autism. First, we assessed the research rigor of those studies meeting our inclusionary criteria. Next, in order to apply a universal metric to help determine the effectiveness of this category of antecedent strategies investigated via single-subject research methods, we calculated effect sizes via omnibus improvement rate differences (IRDs). Outcomes provide additional support for behavioral momentum, especially interventions incorporating the high-probability command sequence. Implications for research and practice are discussed, including the consideration of how single-subject research is systematically reviewed to assess the rigor of studies and assist in determining overall intervention effectiveness .

Computer Science Research at Langley

NASA Technical Reports Server (NTRS)

Voigt, S. J. (Editor)

1982-01-01

A workshop was held at Langley Research Center, November 2-5, 1981, to highlight ongoing computer science research at Langley and to identify additional areas of research based upon the computer user requirements. A panel discussion was held in each of nine application areas, and these are summarized in the proceedings. Slides presented by the invited speakers are also included. A survey of scientific, business, data reduction, and microprocessor computer users helped identify areas of focus for the workshop. Several areas of computer science which are of most concern to the Langley computer users were identified during the workshop discussions. These include graphics, distributed processing, programmer support systems and tools, database management, and numerical methods.

Influence of scary beliefs about the Tuskegee Syphilis Study on willingness to participate in research

PubMed Central

Davis, Jenna L.; Green, B. Lee; Katz, Ralph V.

2013-01-01

Objectives To assess whether scary/alarming beliefs about details on the Tuskegee Syphilis Study (TSS) are associated with willingness and/or fear to participate in biomedical research. Methods Scary beliefs about TSS were examined for 565 Black and White adults who had heard of the TSS. Multivariate analyses by race were used to measure association. Results No association between scary beliefs and willingness or fear to participate in research was found (P>0.05). Conclusions These findings provide additional evidence that awareness or detailed knowledge about the TSS does not appear today to be a major factor influencing Blacks’ willingness to participate in research. PMID:22924230

Building sustainable multi-functional prospective electronic clinical data systems.

PubMed

Randhawa, Gurvaneet S; Slutsky, Jean R

2012-07-01

A better alignment in the goals of the biomedical research enterprise and the health care delivery system can help fill the large gaps in our knowledge of the impact of clinical interventions on patient outcomes in the real world. There are several initiatives underway to align the research priorities of patients, providers, researchers, and policy makers. These include Agency for Healthcare Research and Quality (AHRQ)-supported projects to build flexible prospective clinical electronic data infrastructure that meet the needs of these diverse users. AHRQ has previously supported the creation of 2 distributed research networks as a new approach to conduct comparative effectiveness research (CER) while protecting a patient's confidential information and the proprietary needs of a clinical organization. It has applied its experience in building these networks in directing the American Recovery and Reinvestment Act funds for CER to support new clinical electronic infrastructure projects that can be used for several purposes including CER, quality improvement, clinical decision support, and disease surveillance. In addition, AHRQ has funded a new Electronic Data Methods forum to advance the methods in clinical informatics, research analytics, and governance by actively engaging investigators from the American Recovery and Reinvestment Act-funded projects and external stakeholders.

Ecological Momentary Assessment and Alcohol Use Disorder Treatment

PubMed Central

Morgenstern, Jon; Kuerbis, Alexis; Muench, Frederick

2014-01-01

The ability to capture real-time data on human behavior inexpensively, efficiently, and accurately holds promise to transform and broaden our understanding of many areas of health science. One approach to acquiring this type of real-time data is ecological momentary assessment (EMA). This method has been used to collect data in many domains of addiction research, including research on the treatment of alcohol use disorders (AUDs). Empirical evidence supports the hypothesis that use of EMA can improve the quality of AUD treatment research when compared with standard assessment methods because it provides more accurate reporting, allows investigators to examine the dynamic unfolding of the behavior change process at an individual level, and can be used to augment and improve clinical assessment and treatment. Overall, the existing literature provides strong support for the advantages of EMA when combined with standard assessment of addictive behaviors in general. Nevertheless, use of EMA in AUD treatment research thus far has been limited, especially in the area of research on mechanisms of behavior change. Existing research indicates, however, that EMA can be used to deliver tailored feedback as a novel and potentially transformative approach to improving AUD treatment. This research area clearly warrants additional future efforts. PMID:26259004

Results From the Data & Democracy Initiative to Enhance Community-Based Organization Data and Research Capacity

PubMed Central

Carroll-Scott, Amy; Toy, Peggy; Wyn, Roberta; Zane, Jazmin I.; Wallace, Steven P.

2012-01-01

Objectives. In an era of community-based participatory research and increased expectations for evidence-based practice, we evaluated an initiative designed to increase community-based organizations’ data and research capacity through a 3-day train-the-trainer course on community health assessments. Methods. We employed a mixed method pre–post course evaluation design. Various data sources collected from 171 participants captured individual and organizational characteristics and pre–post course self-efficacy on 19 core skills, as well as behavior change 1 year later among a subsample of participants. Results. Before the course, participants reported limited previous experience with data and low self-efficacy in basic research skills. Immediately after the course, participants demonstrated statistically significant increases in data and research self-efficacy. The subsample reported application of community assessment skills to their work and increased use of data 1 year later. Conclusions. Results suggest that an intensive, short-term training program can achieve large immediate gains in data and research self-efficacy in community-based organization staff. In addition, they demonstrate initial evidence of longer-term behavior change related to use of data and research skills to support their community work. PMID:22594748

Quota sampling in internet research: practical issues.

PubMed

Im, Eun-Ok; Chee, Wonshik

2011-07-01

Quota sampling has been suggested as a potentially good method for Internet-based research and has been used by several researchers working with Internet samples. However, very little is known about the issues or concerns in using a quota sampling method in Internet research. The purpose of this article was to present the practical issues using quota sampling in an Internet-based study. During the Internet study, the research team recorded all recruitment issues that arose and made written notes indicating the possible reasons for the problems. In addition, biweekly team discussions were conducted for which written records were kept. Overall, quota sampling was effective in ensuring that an adequate number of midlife women were recruited from the targeted ethnic groups. However, during the study process, we encountered the following practical issues using quota sampling: (1) difficulty reaching out to women in lower socioeconomic classes, (2) difficulty ensuring authenticity of participants' identities, (3) participants giving inconsistent answers for the screening questions versus the Internet survey questions, (4) potential problems with a question on socioeconomic status, (5) resentment toward the research project and/or researchers because of rejection, and (6) a longer time and more expense than anticipated.

Researching and Respecting the Intricacies of Isolated Communities

PubMed Central

Blumling, Amy A.; Thomas, Tami L.; Stephens, Dionne P.

2014-01-01

Purpose Conducting research in a rural area can be challenging for nurses for a variety of different reasons. The task at hand can be especially difficult when it involves discussing a sensitive topic, such as Human Papillomavirus (HPV) vaccination. This study was conducted to describe parental perceptions of the HPV vaccine in rural areas, while simultaneously describing a method for engaging in successful nursing research in rural areas. Methods A team of nurse researchers completed a planned process to first understand rural culture in southeastern Georgia, and then more specifically, the families living in these three separate counties. This process initially involved developing a connection and working relationship with key community leaders, such as school principals. Following this, researchers worked on establishing rapport and trust with local parents and research participants themselves. Qualitative methods were then used to collect focus group and interview data on parental views of HPV, HPV vaccination, and HPV-related cancers. Findings Results indicated that parents had little knowledge of the HPV vaccine in rural Georgia, including misconceptions that the vaccine is for females only. In addition, many parents continually voiced the concern that the HPV vaccine would promote promiscuity in their children. Conclusions Providing consistent, timely, and open communication with the community members was crucial throughout the entire research process. This focused approach with respect to total community, culture, and religious value is essential in conducting research. Future studies conducted in rural areas should focus on specific intervention points that improve Parental HPV knowledge. PMID:24817833

Men's Preferences for Physical Activity Interventions: An Exploratory Study Using a Factorial Survey Design Created With R Software.

PubMed

Chatfield, Sheryl L; Gamble, Abigail; Hallam, Jeffrey S

2018-03-01

Effective exercise interventions are needed to improve quality of life and decrease the impact of chronic disease. Researchers suggest males have been underrepresented in exercise intervention studies, resulting in less understanding of their exercise practices. Findings from preference survey methods suggest reasonable association between preference and behavior. The purpose of the research described in this article was to use factorial survey, a preference method, to identify the characteristics of exercise interventions most likely to appeal to male participants, so preferences might be incorporated into future intervention research. The research was guided by the framework of Bandura's social cognitive theory, such that variations in individual, environmental, and behavioral factors were incorporated into vignettes. Participants included 53 adult male nonadministrative staff and contract employees at a public university in the Southeastern United States, who each scored 8 vignettes resulting in 423 observations. Multilevel models were used to assess the influence of the factors. Participants scored vignettes that included exercising with a single partner, playing basketball, and exercising in the evening higher than vignettes with other options. Qualitative analysis of an open response item identified additional alternatives in group size, participant desire for coaching support, and interest in programs that incorporate a range of activity alternatives. Findings from this research were consistent with elements of social cognitive theory as applied to health promotion. Factorial surveys potentially provide a resource effective means of identifying participants' preferences for use when planning interventions. The addition of a single qualitative item helped clarify and expand findings from statistical analysis.

Promoting a structural view of biology for varied audiences: an overview of RCSB PDB resources and experiences

PubMed Central

Dutta, Shuchismita; Zardecki, Christine; Goodsell, David S.; Berman, Helen M.

2010-01-01

The Research Collaboratory for Structural Bioinformatics Protein Data Bank (RCSB PDB) supports scientific research and education worldwide by providing an essential resource of information on biomolecular structures. In addition to serving as a deposition, data-processing and distribution center for PDB data, the RCSB PDB offers resources and online materials that different audiences can use to customize their structural biology instruction. These include resources for general audiences that present macromolecular structure in the context of a biological theme, method-based materials for researchers who take a more traditional approach to the presentation of structural science, and materials that mix theme-based and method-based approaches for educators and students. Through these efforts the RCSB PDB aims to enable optimal use of structural data by researchers, educators and students designing and understanding experiments in biology, chemistry and medicine, and by general users making informed decisions about their life and health. PMID:20877496

Mixed Methods Research in the Development and Evaluation of Complex Interventions in Palliative and End-of-Life Care: Report on the MORECare Consensus Exercise

PubMed Central

Preston, Nancy; Evans, Catherine J.; Grande, Gunn; Short, Vicky; Benalia, Hamid; Higginson, Irene J.; Todd, on behalf of MORECare, Chris

2013-01-01

Abstract Background: Complex interventions are common in palliative and end-of-life care. Mixed methods approaches sit well within the multiphase model of complex intervention development and evaluation. Generic mixed methods guidance is useful but additional challenges in the research design and operationalization within palliative and end-of-life care may have an impact on the use of mixed methods. Objective: The objective of the study was to develop guidance on the best methods for combining quantitative and qualitative methods for health and social care intervention development and evaluation in palliative and end-of-life care. Methods: A one-day workshop was held where experts participated in facilitated groups using Transparent Expert Consultation to generate items for potential recommendations. Agreement and consensus were then sought on nine draft recommendations (DRs) in a follow-up exercise. Results: There was at least moderate agreement with most of the DRs, although consensus was low. Strongest agreement was with DR1 (usefulness of mixed methods to palliative and end-of-life care) and DR5 (importance of attention to respondent burden), and least agreement was with DR2 (use of theoretical perspectives) and DR6 (therapeutic effects of research interviews). Narrative comments enabled recommendation refinement. Two fully endorsed, five partially endorsed, and two refined DRs emerged. The relationship of these nine to six key challenges of palliative and end-of-life care research was analyzed. Conclusions: There is a need for further discussion of these recommendations and their contribution to methodology. The recommendations should be considered when designing and operationalizing mixed methods studies of complex interventions in palliative care, and because they may have wider relevance, should be considered for other applications. PMID:24195755

Damage evaluation and repair methods for prestressed concrete bridge members

NASA Astrophysics Data System (ADS)

Shanafelt, G. O.; Horn, W. B.

1980-11-01

The types of accidental damage occurring and the severity and frequency of their occurrence are summarized. Practices and equipment used for assessing damage and making repairs are presented and evaluated. Guidelines for inspection, assessing damage, and selection of repair methods are given. Methods of repair includes adding external prestress, a metal sleeve splice, and splicing broken strands or rods. The findings of this study suggest that in some instances better repair techniques should be used. The findings of this study also indicate that proper selection of repair methods may reduce the number of damaged girders presently being replaced. Plausible methods of repair requiring additional research are identified and techniques for testing are outlined.

Overview of mycotoxin methods, present status and future needs.

PubMed

Gilbert, J

1999-01-01

This article reviews current requirements for the analysis for mycotoxins in foods and identifies legislative as well as other factors that are driving development and validation of new methods. New regulatory limits for mycotoxins and analytical quality assurance requirements for laboratories to only use validated methods are seen as major factors driving developments. Three major classes of methods are identified which serve different purposes and can be categorized as screening, official and research. In each case the present status and future needs are assessed. In addition to an overview of trends in analytical methods, some other areas of analytical quality assurance such as participation in proficiency testing and reference materials are identified.

Mobile/android application for QRS detection using zero cross method

NASA Astrophysics Data System (ADS)

Rizqyawan, M. I.; Simbolon, A. I.; Suhendra, M. A.; Amri, M. F.; Kusumandari, D. E.

2018-03-01

In automatic ECG signal processing, one of the main topics of research is QRS complex detection. Detecting correct QRS complex or R peak is important since it is used to measure several other ECG metrics. One of the robust methods for QRS detection is Zero Cross method. This method uses an addition of high-frequency signal and zero crossing count to detect QRS complex which has a low-frequency oscillation. This paper presents an application of QRS detection using Zero Cross algorithm in the Android-based system. The performance of the algorithm in the mobile environment is measured. The result shows that this method is suitable for real-time QRS detection in a mobile application.

Improving informed consent: Stakeholder views

PubMed Central

Anderson, Emily E.; Newman, Susan B.; Matthews, Alicia K.

2017-01-01

Purpose Innovation will be required to improve the informed consent process in research. We aimed to obtain input from key stakeholders—research participants and those responsible for obtaining informed consent—to inform potential development of a multimedia informed consent “app.” Methods This descriptive study used a mixed-methods approach. Five 90-minute focus groups were conducted with volunteer samples of former research participants and researchers/research staff responsible for obtaining informed consent. Participants also completed a brief survey that measured background information and knowledge and attitudes regarding research and the use of technology. Established qualitative methods were used to conduct the focus groups and data analysis. Results We conducted five focus groups with 41 total participants: three groups with former research participants (total n = 22), and two groups with researchers and research coordinators (total n = 19). Overall, individuals who had previously participated in research had positive views regarding their experiences. However, further discussion elicited that the informed consent process often did not meet its intended objectives. Findings from both groups are presented according to three primary themes: content of consent forms, experience of the informed consent process, and the potential of technology to improve the informed consent process. A fourth theme, need for lay input on informed consent, emerged from the researcher groups. Conclusions Our findings add to previous research that suggests that the use of interactive technology has the potential to improve the process of informed consent. However, our focus-group findings provide additional insight that technology cannot replace the human connection that is central to the informed consent process. More research that incorporates the views of key stakeholders is needed to ensure that multimedia consent processes do not repeat the mistakes of paper-based consent forms. PMID:28949896

The use of generalised additive models (GAM) in dentistry.

PubMed

Helfenstein, U; Steiner, M; Menghini, G

1997-12-01

Ordinary multiple regression and logistic multiple regression are widely applied statistical methods which allow a researcher to 'explain' or 'predict' a response variable from a set of explanatory variables or predictors. In these models it is usually assumed that quantitative predictors such as age enter linearly into the model. During recent years these methods have been further developed to allow more flexibility in the way explanatory variables 'act' on a response variable. The methods are called 'generalised additive models' (GAM). The rigid linear terms characterising the association between response and predictors are replaced in an optimal way by flexible curved functions of the predictors (the 'profiles'). Plotting the 'profiles' allows the researcher to visualise easily the shape by which predictors 'act' over the whole range of values. The method facilitates detection of particular shapes such as 'bumps', 'U-shapes', 'J-shapes, 'threshold values' etc. Information about the shape of the association is not revealed by traditional methods. The shapes of the profiles may be checked by performing a Monte Carlo simulation ('bootstrapping'). After the presentation of the GAM a relevant case study is presented in order to demonstrate application and use of the method. The dependence of caries in primary teeth on a set of explanatory variables is investigated. Since GAMs may not be easily accessible to dentists, this article presents them in an introductory condensed form. It was thought that a nonmathematical summary and a worked example might encourage readers to consider the methods described. GAMs may be of great value to dentists in allowing visualisation of the shape by which predictors 'act' and obtaining a better understanding of the complex relationships between predictors and response.

The STAR Data Reporting Guidelines for Clinical High Altitude Research.

PubMed

Brodmann Maeder, Monika; Brugger, Hermann; Pun, Matiram; Strapazzon, Giacomo; Dal Cappello, Tomas; Maggiorini, Marco; Hackett, Peter; Bärtsch, Peter; Swenson, Erik R; Zafren, Ken

2018-03-01

Brodmann Maeder, Monika, Hermann Brugger, Matiram Pun, Giacomo Strapazzon, Tomas Dal Cappello, Marco Maggiorini, Peter Hackett, Peter Baärtsch, Erik R. Swenson, Ken Zafren (STAR Core Group), and the STAR Delphi Expert Group. The STARdata reporting guidelines for clinical high altitude research. High AltMedBiol. 19:7-14, 2018. The goal of the STAR (STrengthening Altitude Research) initiative was to produce a uniform set of key elements for research and reporting in clinical high-altitude (HA) medicine. The STAR initiative was inspired by research on treatment of cardiac arrest, in which the establishment of the Utstein Style, a uniform data reporting protocol, substantially contributed to improving data reporting and subsequently the quality of scientific evidence. The STAR core group used the Delphi method, in which a group of experts reaches a consensus over multiple rounds using a formal method. We selected experts in the field of clinical HA medicine based on their scientific credentials and identified an initial set of parameters for evaluation by the experts. Of 51 experts in HA research who were identified initially, 21 experts completed both rounds. The experts identified 42 key parameters in 5 categories (setting, individual factors, acute mountain sickness and HA cerebral edema, HA pulmonary edema, and treatment) that were considered essential for research and reporting in clinical HA research. An additional 47 supplemental parameters were identified that should be reported depending on the nature of the research. The STAR initiative, using the Delphi method, identified a set of key parameters essential for research and reporting in clinical HA medicine.

Recommendations for Internet-Based Qualitative Health Research With Hard-to-Reach Populations

PubMed Central

Wilkerson, J. Michael; Iantaffi, Alex; Grey, Jeremy A.; Bockting, Walter O.; Simon Rosser, B. R.

2014-01-01

Researchers new to online qualitative health research frequently have questions about how to transfer knowledge of offline data collection to an online environment. In this article, we present best-practice guidelines derived from the literature and our experience to help researchers determine if an online qualitative study design is appropriate for their research project and, if so, when to begin data collection with a hard-to-reach population. Researchers should reflect on administrative, population, and data collection considerations when deciding between online and offline data collection. Decisions must be made regarding whether to conduct interviews or focus groups, to collect data using asynchronous or synchronous methods, and to use only text or incorporate visual media. Researchers should also reflect on human subjects, recruitment, research instrumentation, additional data collection, and public relations considerations when writing protocols to guide the research team’s response to various situations. Our recommendations direct researchers’ reflection on these considerations. PMID:24623662

The structure and emerging trends of construction safety management research: a bibliometric review.

PubMed

Liang, Huakang; Zhang, Shoujian; Su, Yikun

2018-03-29

Recently, construction safety management (CSM) practices and systems have become important topics for stakeholders to take care of human resources. However, few studies have attempted to map the global research on CSM. A comprehensive bibliometric review was conducted in this study based on multiple methods. In total, 1172 CSM-related papers from the Web of Science Core Collection database were examined. The analyses focused on publication year, country-institute, publication source, author and research topics. The results indicated that the USA, China, Australia and the UK took leading positions in CSM research. Two branches of journals were identified, namely the branch of engineering science and that of safety science and social science. Additionally, seven themes together with 28 specific topics were detected to allow researchers to track the main structure and temporal evolution of CSM research. Finally, the main research trends and potential research directions were discussed to guide the future research.

From concepts, theory, and evidence of heterogeneity of treatment effects to methodological approaches: a primer.

PubMed

Willke, Richard J; Zheng, Zhiyuan; Subedi, Prasun; Althin, Rikard; Mullins, C Daniel

2012-12-13

Implicit in the growing interest in patient-centered outcomes research is a growing need for better evidence regarding how responses to a given intervention or treatment may vary across patients, referred to as heterogeneity of treatment effect (HTE). A variety of methods are available for exploring HTE, each associated with unique strengths and limitations. This paper reviews a selected set of methodological approaches to understanding HTE, focusing largely but not exclusively on their uses with randomized trial data. It is oriented for the "intermediate" outcomes researcher, who may already be familiar with some methods, but would value a systematic overview of both more and less familiar methods with attention to when and why they may be used. Drawing from the biomedical, statistical, epidemiological and econometrics literature, we describe the steps involved in choosing an HTE approach, focusing on whether the intent of the analysis is for exploratory, initial testing, or confirmatory testing purposes. We also map HTE methodological approaches to data considerations as well as the strengths and limitations of each approach. Methods reviewed include formal subgroup analysis, meta-analysis and meta-regression, various types of predictive risk modeling including classification and regression tree analysis, series of n-of-1 trials, latent growth and growth mixture models, quantile regression, and selected non-parametric methods. In addition to an overview of each HTE method, examples and references are provided for further reading.By guiding the selection of the methods and analysis, this review is meant to better enable outcomes researchers to understand and explore aspects of HTE in the context of patient-centered outcomes research.

Avoidable waste related to inadequate methods and incomplete reporting of interventions: a systematic review of randomized trials performed in Sub-Saharan Africa.

PubMed

Ndounga Diakou, Lee Aymar; Ntoumi, Francine; Ravaud, Philippe; Boutron, Isabelle

2017-07-05

Randomized controlled trials (RCTs) are needed to improve health care in Sub-Saharan Africa (SSA). However, inadequate methods and incomplete reporting of interventions can prevent the transposition of research in practice which leads waste of research. The aim of this systematic review was to assess the avoidable waste in research related to inadequate methods and incomplete reporting of interventions in RCTs performed in SSA. We performed a methodological systematic review of RCTs performed in SSA and published between 1 January 2014 and 31 March 2015. We searched PubMed, the Cochrane library and the African Index Medicus to identify reports. We assessed the risk of bias using the Cochrane Risk of Bias tool, and for each risk of bias item, determined whether easy adjustments with no or minor cost could change the domain to low risk of bias. The reporting of interventions was assessed by using standardized checklists based on the Consolidated Standards for Reporting Trials, and core items of the Template for Intervention Description and Replication. Corresponding authors of reports with incomplete reporting of interventions were contacted to obtain additional information. Data were descriptively analyzed. Among 121 RCTs selected, 74 (61%) evaluated pharmacological treatments (PTs), including drugs and nutritional supplements; and 47 (39%) nonpharmacological treatments (NPTs) (40 participative interventions, 1 surgical procedure, 3 medical devices and 3 therapeutic strategies). Overall, the randomization sequence was adequately generated in 76 reports (62%) and the intervention allocation concealed in 48 (39%). The primary outcome was described as blinded in 46 reports (38%), and incomplete outcome data were adequately addressed in 78 (64%). Applying easy methodological adjustments with no or minor additional cost to trials with at least one domain at high risk of bias could have reduced the number of domains at high risk for 24 RCTs (19%). Interventions were completely reported for 73/121 (60%) RCTs: 51/74 (68%) of PTs and 22/47 (46%) of NPTs. Additional information was obtained from corresponding authors for 11/48 reports (22%). Inadequate methods and incomplete reporting of published SSA RCTs could be improved by easy and inexpensive methodological adjustments and adherence to reporting guidelines.

Researching children's individual empathic abilities in the context of their daily lives: the importance of mixed methods

PubMed Central

Roerig, Simone; van Wesel, Floryt; Evers, Sandra J. T. M.; Krabbendam, Lydia

2015-01-01

In social neuroscience, empathy is often approached as an individual ability, whereas researchers in anthropology focus on empathy as a dialectic process between agents. In this perspective paper, we argue that to further elucidate the mechanisms underlying the development of empathy, social neuroscience research should draw on insights and methods from anthropology. First, we discuss neuropsychological studies that investigate empathy in inter-relational contexts. Second, we highlight differences between the social neuroscience and anthropological conceptualizations of empathy. Third, we introduce a new study design based on a mixed method approach, and present initial results from one classroom that was part of a larger study and included 28 children (m = 13, f = 15). Participants (aged 9–11) were administered behavioral tasks and a social network questionnaire; in addition an observational study was also conducted over a period of 3 months. Initial results showed how children's expressions of their empathic abilities were influenced by situational cues in classroom processes. This effect was further explained by children's positions within classroom networks. Our results emphasize the value of interdisciplinary research in the study of empathy. PMID:26283901

A checklist to assess the quality of reports on spa therapy and balneotherapy trials was developed using the Delphi consensus method: the SPAC checklist.

PubMed

Kamioka, Hiroharu; Kawamura, Yoichi; Tsutani, Kiichiro; Maeda, Masaharu; Hayasaka, Shinya; Okuizum, Hiroyasu; Okada, Shinpei; Honda, Takuya; Iijima, Yuichi

2013-08-01

The purpose of this study was to develop a checklist of items that describes and measures the quality of reports of interventional trials assessing spa therapy. The Delphi consensus method was used to select the number of items in the checklist. A total of eight individuals participated, including an epidemiologist, a clinical research methodologist, clinical researchers, a medical journalist, and a health fitness programmer. Participants ranked on a 9-point Likert scale whether an item should be included in the checklist. Three rounds of the Delphi method were conducted to achieve consensus. The final checklist contained 19 items, with items related to title, place of implementation (specificity of spa), care provider influence, and additional measures to minimize the potential bias from withdrawals, loss to follow-up, and low treatment adherence. This checklist is simple and quick to complete, and should help clinicians and researchers critically appraise the medical and healthcare literature, reviewers assess the quality of reports included in systematic reviews, and researchers plan interventional trials of spa therapy. Copyright © 2013 Elsevier Ltd. All rights reserved.

Extensions of algebraic image operators: An approach to model-based vision

NASA Technical Reports Server (NTRS)

Lerner, Bao-Ting; Morelli, Michael V.

1990-01-01

Researchers extend their previous research on a highly structured and compact algebraic representation of grey-level images which can be viewed as fuzzy sets. Addition and multiplication are defined for the set of all grey-level images, which can then be described as polynomials of two variables. Utilizing this new algebraic structure, researchers devised an innovative, efficient edge detection scheme. An accurate method for deriving gradient component information from this edge detector is presented. Based upon this new edge detection system researchers developed a robust method for linear feature extraction by combining the techniques of a Hough transform and a line follower. The major advantage of this feature extractor is its general, object-independent nature. Target attributes, such as line segment lengths, intersections, angles of intersection, and endpoints are derived by the feature extraction algorithm and employed during model matching. The algebraic operators are global operations which are easily reconfigured to operate on any size or shape region. This provides a natural platform from which to pursue dynamic scene analysis. A method for optimizing the linear feature extractor which capitalizes on the spatially reconfiguration nature of the edge detector/gradient component operator is discussed.

Comparative Analysis of Particle Swarm and Differential Evolution via Tuning on Ultrasmall Titanium Oxide Nanoclusters

NASA Astrophysics Data System (ADS)

Inclan, Eric; Lassester, Jack; Geohegan, David; Yoon, Mina

Optimization algorithms (OA) coupled with numerical methods enable researchers to identify and study (meta) stable nanoclusters without the control restrictions of empirical methods. An algorithm's performance is governed by two factors: (1) its compatibility with an objective function, (2) the dimension of a design space, which increases with cluster size. Although researchers often tune an algorithm's user-defined parameters (UDP), tuning is not guaranteed to improve performance. In this research, Particle Swarm (PSO) and Differential Evolution (DE), are compared by tuning their UDP in a multi-objective optimization environment (MOE). Combined with a Kolmogorov Smirnov test for statistical significance, the MOE enables the study of the Pareto Front (PF), made of the UDP settings that trade-off between best performance in energy minimization (``effectiveness'') based on force-field potential energy, and best convergence rate (``efficiency''). By studying the PF, this research finds that UDP values frequently suggested in the literature do not provide best effectiveness for these methods. Additionally, monotonic convergence is found to significantly improve efficiency without sacrificing effectiveness for very small systems, suggesting better compatibility. Work is supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division.

Past, present and prospect of an Artificial Intelligence (AI) based model for sediment transport prediction

NASA Astrophysics Data System (ADS)

Afan, Haitham Abdulmohsin; El-shafie, Ahmed; Mohtar, Wan Hanna Melini Wan; Yaseen, Zaher Mundher

2016-10-01

An accurate model for sediment prediction is a priority for all hydrological researchers. Many conventional methods have shown an inability to achieve an accurate prediction of suspended sediment. These methods are unable to understand the behaviour of sediment transport in rivers due to the complexity, noise, non-stationarity, and dynamism of the sediment pattern. In the past two decades, Artificial Intelligence (AI) and computational approaches have become a remarkable tool for developing an accurate model. These approaches are considered a powerful tool for solving any non-linear model, as they can deal easily with a large number of data and sophisticated models. This paper is a review of all AI approaches that have been applied in sediment modelling. The current research focuses on the development of AI application in sediment transport. In addition, the review identifies major challenges and opportunities for prospective research. Throughout the literature, complementary models superior to classical modelling.

Application of adobe flash media to optimize jigsaw learning model on geometry material

NASA Astrophysics Data System (ADS)

Imam, P.; Imam, S.; Ikrar, P.

2018-05-01

This study aims to determine and describe the effectiveness of the application of adobe flash media for jigsaw learning model on geometry material. In this study, the modified jigsaw learning with adobe flash media is called jigsaw-flash model. This research was conducted in Surakarta. The research method used is mix method research with exploratory sequential strategy. The results of this study indicate that students feel more comfortable and interested in studying geometry material taught by jigsaw-flash model. In addition, students taught using the jigsaw-flash model are more active and motivated than the students who were taught using ordinary jigsaw models. This shows that the use of the jigsaw-flash model can increase student participation and motivation. It can be concluded that the adobe flash media can be used as a solution to reduce the level of student abstraction in learning mathematics.

Batako Quality Optimization with Addition of Palm Oil Stem Fiber from Kampar District and Dumai City

NASA Astrophysics Data System (ADS)

Zainuri; Yanti, Gusneli; Wahyuni Megasari, Shanti

2017-12-01

The waste of dry palm oil produced by 148 trees per hectare is 3,108 ton/month or 37,296 ton/year as calculated. Riau province has oil palm plantations covering an area of 2.399.172 hectares (BPS Riau Province, 2014). It can be estimated the amount of waste generated. Palm stem waste can be utilized, one of which is the utilization of midrib fiber as an added material in the manufacture of batako. Batako- fiber that is made still must be examined feasibility as building materials. The purpose of this study was to determine the optimization of the quality of batako works by the addition of palm stem fiber originated from the districts of Kampar and Dumai. This research used experimental method with laboratory research. Batako-fiber with the addition of palm fiber stem 1% of the weight of cement can increase the value of compressive strength above the normal batako and a batako with first quality according to SNI 03-0349-1989 standard. The use of palm stem fiber originating from the Kampar district resulted in better batakos with higher average compressive strength values than the dumai-derived fibers, especially in the addition of 1% fiber by weight of cement. The finding of this research is that the batakos originating from Kampar district are better than those from Dumai city. The most optimal addition of palm fiber burrs to batako-fiber products is 1% of the weight of cement.

Research on the Environmental Performance Evaluation of Electronic Waste Reverse Logistics Enterprise

NASA Astrophysics Data System (ADS)

Yang, Yu-Xiang; Chen, Fei-Yang; Tong, Tong

According to the characteristic of e-waste reverse logistics, environmental performance evaluation system of electronic waste reverse logistics enterprise is proposed. We use fuzzy analytic hierarchy process method to evaluate the system. In addition, this paper analyzes the enterprise X, as an example, to discuss the evaluation method. It's important to point out attributes and indexes which should be strengthen during the process of ewaste reverse logistics and provide guidance suggestions to domestic e-waste reverse logistics enterprises.

Review of the Air-Coupled Impact-Echo Method for Non-Destructive Testing

NASA Astrophysics Data System (ADS)

Nowotarski, Piotr; Dubas, Sebastian; Milwicz, Roman

2017-10-01

The article presents the general idea of Air-Coupled Impact-Echo (ACIE) method which is one of the non-destructive testing (NDT) techniques used in the construction industry. One of the main advantages of the general Impact Echo (IE) method is that it is sufficient to access from one side to that of the structure which greatly facilitate research in the road facilities or places which are difficult to access and diagnose. The main purpose of the article is to present state-of-the-art related to ACIE method based on the publications available at Thomson Reuters Web of Science Core Collection database (WOS) with the further analysis of the mentioned methods. Deeper analysis was also performed for the newest publications published within last 3 years related to ACIE for investigation on the subject of main focus of the researchers and scientists to try to define possible regions where additional examination and work is necessary. One of the main conclusions that comes from the performed analysis is that ACIE methods can be widely used for performing NDT of concrete structures and can be performed faster than standard IE method thanks to the Air-coupled sensors. What is more, 92.3% of the analysed recent research described in publications connected with ACIE was performed in laboratories, and only 23.1% in-situ on real structures. This indicates that method requires further research to prepare test stand ready to perform analysis on real objects outside laboratory conditions. Moreover, algorithms that are used for data processing and later presentation in ACIE method are still being developed and there is no universal solution available for all kinds of the existing and possible to find defects, which indicates possible research area for further works. Authors are of the opinion that emerging ACIE method could be good opportunity for ND testing especially for concrete structures. Development and refinement of test stands that will allow to perform in-situ tests could shorten the overall time of the research and with the connection of implementation of higher accuracy algorithms for data analysis better precision of defects localization can be achieved.

Methods to Improve Reliability of Video Recorded Behavioral Data

PubMed Central

Haidet, Kim Kopenhaver; Tate, Judith; Divirgilio-Thomas, Dana; Kolanowski, Ann; Happ, Mary Beth

2009-01-01

Behavioral observation is a fundamental component of nursing practice and a primary source of clinical research data. The use of video technology in behavioral research offers important advantages to nurse scientists in assessing complex behaviors and relationships between behaviors. The appeal of using this method should be balanced, however, by an informed approach to reliability issues. In this paper, we focus on factors that influence reliability, such as the use of sensitizing sessions to minimize participant reactivity and the importance of training protocols for video coders. In addition, we discuss data quality, the selection and use of observational tools, calculating reliability coefficients, and coding considerations for special populations based on our collective experiences across three different populations and settings. PMID:19434651

Statistical methods for conducting agreement (comparison of clinical tests) and precision (repeatability or reproducibility) studies in optometry and ophthalmology.

PubMed

McAlinden, Colm; Khadka, Jyoti; Pesudovs, Konrad

2011-07-01

The ever-expanding choice of ocular metrology and imaging equipment has driven research into the validity of their measurements. Consequently, studies of the agreement between two instruments or clinical tests have proliferated in the ophthalmic literature. It is important that researchers apply the appropriate statistical tests in agreement studies. Correlation coefficients are hazardous and should be avoided. The 'limits of agreement' method originally proposed by Altman and Bland in 1983 is the statistical procedure of choice. Its step-by-step use and practical considerations in relation to optometry and ophthalmology are detailed in addition to sample size considerations and statistical approaches to precision (repeatability or reproducibility) estimates. Ophthalmic & Physiological Optics © 2011 The College of Optometrists.

Investigation of advanced fault insertion and simulator methods

NASA Technical Reports Server (NTRS)

Dunn, W. R.; Cottrell, D.

1986-01-01

The cooperative agreement partly supported research leading to the open-literature publication cited. Additional efforts under the agreement included research into fault modeling of semiconductor devices. Results of this research are presented in this report which is summarized in the following paragraphs. As a result of the cited research, it appears that semiconductor failure mechanism data is abundant but of little use in developing pin-level device models. Failure mode data on the other hand does exist but is too sparse to be of any statistical use in developing fault models. What is significant in the failure mode data is that, unlike classical logic, MSI and LSI devices do exhibit more than 'stuck-at' and open/short failure modes. Specifically they are dominated by parametric failures and functional anomalies that can include intermittent faults and multiple-pin failures. The report discusses methods of developing composite pin-level models based on extrapolation of semiconductor device failure mechanisms, failure modes, results of temperature stress testing and functional modeling. Limitations of this model particularly with regard to determination of fault detection coverage and latency time measurement are discussed. Indicated research directions are presented.

Contemporary Test Validity in Theory and Practice: A Primer for Discipline-Based Education Researchers

PubMed Central

Reeves, Todd D.; Marbach-Ad, Gili

2016-01-01

Most discipline-based education researchers (DBERs) were formally trained in the methods of scientific disciplines such as biology, chemistry, and physics, rather than social science disciplines such as psychology and education. As a result, DBERs may have never taken specific courses in the social science research methodology—either quantitative or qualitative—on which their scholarship often relies so heavily. One particular aspect of (quantitative) social science research that differs markedly from disciplines such as biology and chemistry is the instrumentation used to quantify phenomena. In response, this Research Methods essay offers a contemporary social science perspective on test validity and the validation process. The instructional piece explores the concepts of test validity, the validation process, validity evidence, and key threats to validity. The essay also includes an in-depth example of a validity argument and validation approach for a test of student argument analysis. In addition to DBERs, this essay should benefit practitioners (e.g., lab directors, faculty members) in the development, evaluation, and/or selection of instruments for their work assessing students or evaluating pedagogical innovations. PMID:26903498

Quantitative magnetic resonance micro-imaging methods for pharmaceutical research.

PubMed

Mantle, M D

2011-09-30

The use of magnetic resonance imaging (MRI) as a tool in pharmaceutical research is now well established and the current literature covers a multitude of different pharmaceutically relevant research areas. This review focuses on the use of quantitative magnetic resonance micro-imaging techniques and how they have been exploited to extract information that is of direct relevance to the pharmaceutical industry. The article is divided into two main areas. The first half outlines the theoretical aspects of magnetic resonance and deals with basic magnetic resonance theory, the effects of nuclear spin-lattice (T(1)), spin-spin (T(2)) relaxation and molecular diffusion upon image quantitation, and discusses the applications of rapid magnetic resonance imaging techniques. In addition to the theory, the review aims to provide some practical guidelines for the pharmaceutical researcher with an interest in MRI as to which MRI pulse sequences/protocols should be used and when. The second half of the article reviews the recent advances and developments that have appeared in the literature concerning the use of quantitative micro-imaging methods to pharmaceutically relevant research. Copyright © 2010 Elsevier B.V. All rights reserved.

A cross-species analysis method to analyze animal models' similarity to human's disease state

PubMed Central

2012-01-01

Background Animal models are indispensable tools in studying the cause of human diseases and searching for the treatments. The scientific value of an animal model depends on the accurate mimicry of human diseases. The primary goal of the current study was to develop a cross-species method by using the animal models' expression data to evaluate the similarity to human diseases' and assess drug molecules' efficiency in drug research. Therefore, we hoped to reveal that it is feasible and useful to compare gene expression profiles across species in the studies of pathology, toxicology, drug repositioning, and drug action mechanism. Results We developed a cross-species analysis method to analyze animal models' similarity to human diseases and effectiveness in drug research by utilizing the existing animal gene expression data in the public database, and mined some meaningful information to help drug research, such as potential drug candidates, possible drug repositioning, side effects and analysis in pharmacology. New animal models could be evaluated by our method before they are used in drug discovery. We applied the method to several cases of known animal model expression profiles and obtained some useful information to help drug research. We found that trichostatin A and some other HDACs could have very similar response across cell lines and species at gene expression level. Mouse hypoxia model could accurately mimic the human hypoxia, while mouse diabetes drug model might have some limitation. The transgenic mouse of Alzheimer was a useful model and we deeply analyzed the biological mechanisms of some drugs in this case. In addition, all the cases could provide some ideas for drug discovery and drug repositioning. Conclusions We developed a new cross-species gene expression module comparison method to use animal models' expression data to analyse the effectiveness of animal models in drug research. Moreover, through data integration, our method could be applied for drug research, such as potential drug candidates, possible drug repositioning, side effects and information about pharmacology. PMID:23282076

A cross-species analysis method to analyze animal models' similarity to human's disease state.

PubMed

Yu, Shuhao; Zheng, Lulu; Li, Yun; Li, Chunyan; Ma, Chenchen; Li, Yixue; Li, Xuan; Hao, Pei

2012-01-01

Animal models are indispensable tools in studying the cause of human diseases and searching for the treatments. The scientific value of an animal model depends on the accurate mimicry of human diseases. The primary goal of the current study was to develop a cross-species method by using the animal models' expression data to evaluate the similarity to human diseases' and assess drug molecules' efficiency in drug research. Therefore, we hoped to reveal that it is feasible and useful to compare gene expression profiles across species in the studies of pathology, toxicology, drug repositioning, and drug action mechanism. We developed a cross-species analysis method to analyze animal models' similarity to human diseases and effectiveness in drug research by utilizing the existing animal gene expression data in the public database, and mined some meaningful information to help drug research, such as potential drug candidates, possible drug repositioning, side effects and analysis in pharmacology. New animal models could be evaluated by our method before they are used in drug discovery. We applied the method to several cases of known animal model expression profiles and obtained some useful information to help drug research. We found that trichostatin A and some other HDACs could have very similar response across cell lines and species at gene expression level. Mouse hypoxia model could accurately mimic the human hypoxia, while mouse diabetes drug model might have some limitation. The transgenic mouse of Alzheimer was a useful model and we deeply analyzed the biological mechanisms of some drugs in this case. In addition, all the cases could provide some ideas for drug discovery and drug repositioning. We developed a new cross-species gene expression module comparison method to use animal models' expression data to analyse the effectiveness of animal models in drug research. Moreover, through data integration, our method could be applied for drug research, such as potential drug candidates, possible drug repositioning, side effects and information about pharmacology.

Methods to Calculate the Heat Index as an Exposure Metric in Environmental Health Research

PubMed Central

Bell, Michelle L.; Peng, Roger D.

2013-01-01

Background: Environmental health research employs a variety of metrics to measure heat exposure, both to directly study the health effects of outdoor temperature and to control for temperature in studies of other environmental exposures, including air pollution. To measure heat exposure, environmental health studies often use heat index, which incorporates both air temperature and moisture. However, the method of calculating heat index varies across environmental studies, which could mean that studies using different algorithms to calculate heat index may not be comparable. Objective and Methods: We investigated 21 separate heat index algorithms found in the literature to determine a) whether different algorithms generate heat index values that are consistent with the theoretical concepts of apparent temperature and b) whether different algorithms generate similar heat index values. Results: Although environmental studies differ in how they calculate heat index values, most studies’ heat index algorithms generate values consistent with apparent temperature. Additionally, most different algorithms generate closely correlated heat index values. However, a few algorithms are potentially problematic, especially in certain weather conditions (e.g., very low relative humidity, cold weather). To aid environmental health researchers, we have created open-source software in R to calculate the heat index using the U.S. National Weather Service’s algorithm. Conclusion: We identified 21 separate heat index algorithms used in environmental research. Our analysis demonstrated that methods to calculate heat index are inconsistent across studies. Careful choice of a heat index algorithm can help ensure reproducible and consistent environmental health research. Citation: Anderson GB, Bell ML, Peng RD. 2013. Methods to calculate the heat index as an exposure metric in environmental health research. Environ Health Perspect 121:1111–1119; http://dx.doi.org/10.1289/ehp.1206273 PMID:23934704

Intelligent monitoring and control of semiconductor manufacturing equipment

NASA Technical Reports Server (NTRS)

Murdock, Janet L.; Hayes-Roth, Barbara

1991-01-01

The use of AI methods to monitor and control semiconductor fabrication in a state-of-the-art manufacturing environment called the Rapid Thermal Multiprocessor is described. Semiconductor fabrication involves many complex processing steps with limited opportunities to measure process and product properties. By applying additional process and product knowledge to that limited data, AI methods augment classical control methods by detecting abnormalities and trends, predicting failures, diagnosing, planning corrective action sequences, explaining diagnoses or predictions, and reacting to anomalous conditions that classical control systems typically would not correct. Research methodology and issues are discussed, and two diagnosis scenarios are examined.

Comparison of methods used for estimating pharmacist counseling behaviors.

PubMed

Schommer, J C; Sullivan, D L; Wiederholt, J B

1994-01-01

To compare the rates reported for provision of types of information conveyed by pharmacists among studies for which different methods of estimation were used and different dispensing situations were studied. Empiric studies conducted in the US, reported from 1982 through 1992, were selected from International Pharmaceutical Abstracts, MEDLINE, and noncomputerized sources. Empiric studies were selected for review if they reported the provision of at least three types of counseling information. Four components of methods used for estimating pharmacist counseling behaviors were extracted and summarized in a table: (1) sample type and area, (2) sampling unit, (3) sample size, and (4) data collection method. In addition, situations that were investigated in each study were compiled. Twelve studies met our inclusion criteria. Patients were interviewed via telephone in four studies and were surveyed via mail in two studies. Pharmacists were interviewed via telephone in one study and surveyed via mail in two studies. For three studies, researchers visited pharmacy sites for data collection using the shopper method or observation method. Studies with similar methods and situations provided similar results. Data collected by using patient surveys, pharmacist surveys, and observation methods can provide useful estimations of pharmacist counseling behaviors if researchers measure counseling for specific, well-defined dispensing situations.

Latency as a region contrast: Measuring ERP latency differences with Dynamic Time Warping.

PubMed

Zoumpoulaki, A; Alsufyani, A; Filetti, M; Brammer, M; Bowman, H

2015-12-01

Methods for measuring onset latency contrasts are evaluated against a new method utilizing the dynamic time warping (DTW) algorithm. This new method allows latency to be measured across a region instead of single point. We use computer simulations to compare the methods' power and Type I error rates under different scenarios. We perform per-participant analysis for different signal-to-noise ratios and two sizes of window (broad vs. narrow). In addition, the methods are tested in combination with single-participant and jackknife average waveforms for different effect sizes, at the group level. DTW performs better than the other methods, being less sensitive to noise as well as to placement and width of the window selected. © 2015 Society for Psychophysiological Research.

Peer workers' perceptions and experiences of barriers to implementation of peer worker roles in mental health services: A literature review.

PubMed

Vandewalle, Joeri; Debyser, Bart; Beeckman, Dimitri; Vandecasteele, Tina; Van Hecke, Ann; Verhaeghe, Sofie

2016-08-01

To identify peer workers' perceptions and experiences of barriers to implementation of peer worker roles in mental health services. Review of qualitative and quantitative studies. A comprehensive electronic database search was conducted between October 2014 and December 2015 in PubMed, CINAHL, Web of Science, The Cochrane Library, and PsycARTICLES. Additional articles were identified through handsearch. All articles were assessed on quality. A thematic analysis informed by a multi-level approach was adopted to identify and discuss the main themes in the individual studies. Reporting was in line with the 'Enhancing transparency in reporting the synthesis of qualitative research' statement. Eighteen articles met the inclusion criteria. All studies adopted qualitative research methods, of which three studies used additional quantitative methods. Peer workers' perceptions and experiences cover a range of themes including the lack of credibility of peer worker roles, professionals' negative attitudes, tensions with service users, struggles with identity construction, cultural impediments, poor organizational arrangements, and inadequate overarching social and mental health policies. This review can inform policy, practice and research from the unique perspective of peer workers. Mental health professionals and peer workers should enter into an alliance to address barriers in the integration of peer workers and to enhance quality of service delivery. Longitudinal research is needed to determine how to address barriers in the implementation of peer worker roles. Copyright © 2016 Elsevier Ltd. All rights reserved.

Bibliometric mapping and clustering analysis of Iranian papers on reproductive medicine in Scopus database (2010-2014)

PubMed Central

Bazm, Soheila; Kalantar, Seyyed Mehdi; Mirzaei, Masoud

2016-01-01

Background: To meet the future challenges in the field of reproductive medicine in Iran, better understanding of published studies is needed. Bibliometric methods and social network analysis have been used to measure the scope and illustrate scientific output of researchers in this field. Objective: This study provides insight into the structure of the network of Iranian papers published in the field of reproductive medicine through 2010-2014. Materials and Methods: In this cross-sectional study, all relevant scientific publications were retrieved from Scopus database and were analyzed according to document type, journal of publication, hot topics, authors and institutions. The results were mapped and clustered by VosViewer software. Results: In total, 3141 papers from Iranian researchers were identified in Scopus database between 2010-2014. The numbers of publications per year have been increased from 461 in 2010 to 749 in 2014. Tehran University of Medical Sciences and "Soleimani M" are occupied the top position based on Productivity indicator. Likewise "Soleimani M" was obtained the first rank among authors according to degree centrality, betweenness centrality and collaboration criteria. In addition, among institutions, Iranian Academic Center for Education, Culture and Research (ACECR) was leader based on degree centrality, betweenness centrality and collaboration indicators. Conclusion: Publications of Iranian researchers in the field of reproductive medicine showed steadily growth during 2010-2014. It seems that in addition to quantity, Iranian authors have to promote quality of articles and collaboration. It will help them to advance their efforts. PMID:27525320

Focusing on appraisals: how and why anger and fear influence driving risk perception.

PubMed

Lu, Jingyi; Xie, Xiaofei; Zhang, Ruogu

2013-06-01

The present research explores how and why anger and fear influence driving risk perception. Based on appraisal tendency framework, researchers hypothesized that anger and fear would influence driving risk perception in opposite directions due to their differences in appraisals. Study 1 showed that anger reduced risk perception, whereas fear increased it. In Studies 2, 3, and 4, the researchers adopted the paradigm of reappraisal to investigate the causes of the opposite effects found in Study 1. Consistent with our hypothesis, appraisals accounted for these effects: After reappraisals along the dimensions of certainty (Study 2), control (Study 3), and responsibility (Study 4), the different effects between anger and fear on driving risk perception diminished or disappeared. In addition, fearful or angry experience mediated the effects of reappraisals on driving risk perception. The findings highlight the necessity to differentiate anger and fear in road safety management. Additionally, the current research also provides feasible methods (e.g., certainty, control, or responsibility reappraisal) to intervene in driving risk perception, which is important for driving safety. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Comparing Postural Stability Entropy Analyses to Differentiate Fallers and Non-Fallers

PubMed Central

Fino, Peter C.; Mojdehi, Ahmad R.; Adjerid, Khaled; Habibi, Mohammad; Lockhart, Thurmon E.; Ross, Shane D.

2015-01-01

The health and financial cost of falls has spurred research to differentiate the characteristics of fallers and non-fallers. Postural stability has received much of the attention with recent studies exploring various measures of entropy. This study compared the discriminatory ability of several entropy methods at differentiating two paradigms in the center-of-pressure (COP) of elderly individuals: 1.) eyes open (EO) versus eyes closed (EC) and 2.) fallers (F) versus non-fallers (NF). Methods were compared using the area under the curve (AUC) of the receiver-operating characteristic (ROC) curves developed from logistic regression models. Overall, multiscale entropy (MSE) and composite multiscale entropy (CompMSE) performed the best with AUCs of 0.71 for EO/EC and 0.77 for F/NF. When methods were combined together to maximize the AUC, the entropy classifier had an AUC of for 0.91 the F/NF comparison. These results suggest researchers and clinicians attempting to create clinical tests to identify fallers should consider a combination of every entropy method when creating a classifying test. Additionally, MSE and CompMSE classifiers using polar coordinate data outperformed rectangular coordinate data, encouraging more research into the most appropriate time series for postural stability entropy analysis. PMID:26464267

Research and development of a field-ready protocol for sampling of phosgene from stationary source emissions: Diethylamine reagent studies. Research report, 11 July 1995--30 September 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steger, J.L.; Bursey, J.T.; Merrill, R.G.

1999-03-01

This report presents the results of laboratory studies to develop and evaluate a method for the sampling and analysis of phosgene from stationary sources of air emissions using diethylamine (DEA) in toluene as the collection media. The method extracts stack gas from emission sources and stabilizes the reactive gas for subsequent analysis. DEA was evaluated both in a benchtop study and in a laboratory train spiking study. This report includes results for both the benchtop study and the train spiking study. Benchtop studies to evaluate the suitability of DEA for collecting and analyzing phosgene investigated five variables: storage time, DEAmore » concentration, moisture/pH, phosgene concentration, and sample storage temperature. Prototype sampling train studies were performed to determine if the benchtop chemical studies were transferable to a Modified Method 5 sampling train collecting phosgene in the presence of clean air mixed with typical stack gas components. Four conditions, which varied the moisture and phosgene spike were evaluated in triplicate. In addition to research results, the report includes a detailed draft method for sampling and analysis of phosgene from stationary source emissions.« less

Effective integrated frameworks for assessing mining sustainability.

PubMed

Virgone, K M; Ramirez-Andreotta, M; Mainhagu, J; Brusseau, M L

2018-05-28

The objectives of this research are to review existing methods used for assessing mining sustainability, analyze the limited prior research that has evaluated the methods, and identify key characteristics that would constitute an enhanced sustainability framework that would serve to improve sustainability reporting in the mining industry. Five of the most relevant frameworks were selected for comparison in this analysis, and the results show that there are many commonalities among the five, as well as some disparities. In addition, relevant components are missing from all five. An enhanced evaluation system and framework were created to provide a more holistic, comprehensive method for sustainability assessment and reporting. The proposed framework has five components that build from and encompass the twelve evaluation characteristics used in the analysis. The components include Foundation, Focus, Breadth, Quality Assurance, and Relevance. The enhanced framework promotes a comprehensive, location-specific reporting approach with a concise set of well-defined indicators. Built into the framework is quality assurance, as well as a defined method to use information from sustainability reports to inform decisions. The framework incorporates human health and socioeconomic aspects via initiatives such as community-engaged research, economic valuations, and community-initiated environmental monitoring.

Comparing Postural Stability Entropy Analyses to Differentiate Fallers and Non-fallers.

PubMed

Fino, Peter C; Mojdehi, Ahmad R; Adjerid, Khaled; Habibi, Mohammad; Lockhart, Thurmon E; Ross, Shane D

2016-05-01

The health and financial cost of falls has spurred research to differentiate the characteristics of fallers and non-fallers. Postural stability has received much of the attention with recent studies exploring various measures of entropy. This study compared the discriminatory ability of several entropy methods at differentiating two paradigms in the center-of-pressure of elderly individuals: (1) eyes open (EO) vs. eyes closed (EC) and (2) fallers (F) vs. non-fallers (NF). Methods were compared using the area under the curve (AUC) of the receiver-operating characteristic curves developed from logistic regression models. Overall, multiscale entropy (MSE) and composite multiscale entropy (CompMSE) performed the best with AUCs of 0.71 for EO/EC and 0.77 for F/NF. When methods were combined together to maximize the AUC, the entropy classifier had an AUC of for 0.91 the F/NF comparison. These results suggest researchers and clinicians attempting to create clinical tests to identify fallers should consider a combination of every entropy method when creating a classifying test. Additionally, MSE and CompMSE classifiers using polar coordinate data outperformed rectangular coordinate data, encouraging more research into the most appropriate time series for postural stability entropy analysis.

3D printed microfluidic circuitry via multijet-based additive manufacturing†

PubMed Central

Sochol, R. D.; Sweet, E.; Glick, C. C.; Venkatesh, S.; Avetisyan, A.; Ekman, K. F.; Raulinaitis, A.; Tsai, A.; Wienkers, A.; Korner, K.; Hanson, K.; Long, A.; Hightower, B. J.; Slatton, G.; Burnett, D. C.; Massey, T. L.; Iwai, K.; Lee, L. P.; Pister, K. S. J.; Lin, L.

2016-01-01

The miniaturization of integrated fluidic processors affords extensive benefits for chemical and biological fields, yet traditional, monolithic methods of microfabrication present numerous obstacles for the scaling of fluidic operators. Recently, researchers have investigated the use of additive manufacturing or “three-dimensional (3D) printing” technologies – predominantly stereolithography – as a promising alternative for the construction of submillimeter-scale fluidic components. One challenge, however, is that current stereolithography methods lack the ability to simultaneously print sacrificial support materials, which limits the geometric versatility of such approaches. In this work, we investigate the use of multijet modelling (alternatively, polyjet printing) – a layer-by-layer, multi-material inkjetting process – for 3D printing geometrically complex, yet functionally advantageous fluidic components comprised of both static and dynamic physical elements. We examine a fundamental class of 3D printed microfluidic operators, including fluidic capacitors, fluidic diodes, and fluidic transistors. In addition, we evaluate the potential to advance on-chip automation of integrated fluidic systems via geometric modification of component parameters. Theoretical and experimental results for 3D fluidic capacitors demonstrated that transitioning from planar to non-planar diaphragm architectures improved component performance. Flow rectification experiments for 3D printed fluidic diodes revealed a diodicity of 80.6 ± 1.8. Geometry-based gain enhancement for 3D printed fluidic transistors yielded pressure gain of 3.01 ± 0.78. Consistent with additional additive manufacturing methodologies, the use of digitally-transferrable 3D models of fluidic components combined with commercially-available 3D printers could extend the fluidic routing capabilities presented here to researchers in fields beyond the core engineering community. PMID:26725379

Ergonomic Work Station Design to Improve Workload Quality and Productivity of the Craffsmen

NASA Astrophysics Data System (ADS)

Widana, IK; Wayan Sumetri, Ni; Ketut Sutapa, I.

2018-01-01

This study is a research on ergonomics field, especially for ergonomics work station. This research begins with direct observation on the work process of carving craft. In addition to the aspect of occupational health, the stages of the process are also subject matter in the effort to solve the research problem. In accordance with the master plan of research of Bali State Polytechnic, problem solving will be focused on human aspect and utilization of appropriate technology, so that will get the work process ENASEP (effective, convenient, safe, healthy, efficient and productive) Technical easy to work, economical, ergonomic, energy saving, environmentally friendly and in accordance with the trend of the era. The method to be used in this research is experimental with the same subject design. Involves 9 samples who perform activities on conditions before and after treatment. Data on environmental conditions were analyzed by Mann-Whitney test. Data on work productivity and workload were tested with two pair sample t-test at a significance level of 5%. The results showed that by utilizing ergonomic work stations, occupational health indicators such as workload showed better signs, indicated by decreased the workload. In addition to occupational health, productivity indicators also increased significantly.

United States Private-Sector Physicians and Pharmaceutical Contract Research: A Qualitative Study

PubMed Central

Fisher, Jill A.; Kalbaugh, Corey A.

2012-01-01

Background There have been dramatic increases over the past 20 years in the number of nonacademic, private-sector physicians who serve as principal investigators on US clinical trials sponsored by the pharmaceutical industry. However, there has been little research on the implications of these investigators' role in clinical investigation. Our objective was to study private-sector clinics involved in US pharmaceutical clinical trials to understand the contract research arrangements supporting drug development, and specifically how private-sector physicians engaged in contract research describe their professional identities. Methods and Findings We conducted a qualitative study in 2003–2004 combining observation at 25 private-sector research organizations in the southwestern United States and 63 semi-structured interviews with physicians, research staff, and research participants at those clinics. We used grounded theory to analyze and interpret our data. The 11 private-sector physicians who participated in our study reported becoming principal investigators on industry clinical trials primarily because contract research provides an additional revenue stream. The physicians reported that they saw themselves as trial practitioners and as businesspeople rather than as scientists or researchers. Conclusions Our findings suggest that in addition to having financial motivation to participate in contract research, these US private-sector physicians have a professional identity aligned with an industry-based approach to research ethics. The generalizability of these findings and whether they have changed in the intervening years should be addressed in future studies. Please see later in the article for the Editors' Summary. PMID:22911055

Influence of the multilayer coating obtained by the HVOF method on behavior of the steel barrier at dynamic loading

NASA Astrophysics Data System (ADS)

Radchenko, Pavel; Radchenko, Andrey; Batuev, Stanislav

2013-06-01

The high velocity (supersonic) oxy-fuel (HVOF) thermal spray technology is a rather recent addition to family of thermal spray processes. This technique is considered most modern of technologies of spraying. The increase in velocity of the particles at lower temperatures allowed reducing level of oxidation of the particles and to increase the density of a powder coating. In HVOF dry dusting applicators of the first and second generations was used the cylindrical nozzle, whereas in the third generation expanding Laval nozzles are used. This method allows the velocity of a gas flow to exceed to 2000 m/sec, and the velocities of the powder particles 800 m/sec. Recently many results on elastic and strength properties of the multilayer coatings obtained by supersonic flame spraying method are received. But the main part of works on research of the coating obtained by the HVOF method is devoted to research of their stress-strain state at static loadings. In this work the behavior of the steel barrier with the multilayer coating applied by HVOF is researched, at dynamic loading of projectile structure at different velocities of interaction. The problem was solved numerically within Lagrangian approach, a finite element method with the use of the explicit finite difference scheme of G. Johnson.

Probabilistic structural mechanics research for parallel processing computers

NASA Technical Reports Server (NTRS)

Sues, Robert H.; Chen, Heh-Chyun; Twisdale, Lawrence A.; Martin, William R.

1991-01-01

Aerospace structures and spacecraft are a complex assemblage of structural components that are subjected to a variety of complex, cyclic, and transient loading conditions. Significant modeling uncertainties are present in these structures, in addition to the inherent randomness of material properties and loads. To properly account for these uncertainties in evaluating and assessing the reliability of these components and structures, probabilistic structural mechanics (PSM) procedures must be used. Much research has focused on basic theory development and the development of approximate analytic solution methods in random vibrations and structural reliability. Practical application of PSM methods was hampered by their computationally intense nature. Solution of PSM problems requires repeated analyses of structures that are often large, and exhibit nonlinear and/or dynamic response behavior. These methods are all inherently parallel and ideally suited to implementation on parallel processing computers. New hardware architectures and innovative control software and solution methodologies are needed to make solution of large scale PSM problems practical.

Dropout policies and trends for students with and without disabilities.

PubMed

Kemp, Suzanne E

2006-01-01

Students with and without disabilities are dropping out of school at an alarming rate. However, the precise extent of the problem remains elusive because individual schools, school districts, and state departments of education often use different definitional criteria and calculation methods. In addition, specific reasons why students drop out continues to be speculative and minimal research exists validating current dropout prevention programs for students with and without disabilities. This study examined methods secondary school principals used to calculate dropout rates, reasons they believed students dropped out of school, and what prevention programs were being used for students with and without disabilities. Results indicated that school districts used calculation methods that minimized dropout rates, students with and without disabilities dropped out for similar reasons, and few empirically validated prevention programs were being implemented. Implications for practice and directions for future research are discussed.

Cascading failure in the wireless sensor scale-free networks

NASA Astrophysics Data System (ADS)

Liu, Hao-Ran; Dong, Ming-Ru; Yin, Rong-Rong; Han, Li

2015-05-01

In the practical wireless sensor networks (WSNs), the cascading failure caused by a failure node has serious impact on the network performance. In this paper, we deeply research the cascading failure of scale-free topology in WSNs. Firstly, a cascading failure model for scale-free topology in WSNs is studied. Through analyzing the influence of the node load on cascading failure, the critical load triggering large-scale cascading failure is obtained. Then based on the critical load, a control method for cascading failure is presented. In addition, the simulation experiments are performed to validate the effectiveness of the control method. The results show that the control method can effectively prevent cascading failure. Project supported by the Natural Science Foundation of Hebei Province, China (Grant No. F2014203239), the Autonomous Research Fund of Young Teacher in Yanshan University (Grant No. 14LGB017) and Yanshan University Doctoral Foundation, China (Grant No. B867).

Effects of test method and participant musical training on preference ratings of stimuli with different reverberation times.

PubMed

Lawless, Martin S; Vigeant, Michelle C

2017-10-01

Selecting an appropriate listening test design for concert hall research depends on several factors, including listening test method and participant critical-listening experience. Although expert listeners afford more reliable data, their perceptions may not be broadly representative. The present paper contains two studies that examined the validity and reliability of the data obtained from two listening test methods, a successive and a comparative method, and two types of participants, musicians and non-musicians. Participants rated their overall preference of auralizations generated from eight concert hall conditions with a range of reverberation times (0.0-7.2 s). Study 1, with 34 participants, assessed the two methods. The comparative method yielded similar results and reliability as the successive method. Additionally, the comparative method was rated as less difficult and more preferable. For study 2, an additional 37 participants rated the stimuli using the comparative method only. An analysis of variance of the responses from both studies revealed that musicians are better than non-musicians at discerning their preferences across stimuli. This result was confirmed with a k-means clustering analysis on the entire dataset that revealed five preference groups. Four groups exhibited clear preferences to the stimuli, while the fifth group, predominantly comprising non-musicians, demonstrated no clear preference.

Fuzzy System-Based Target Selection for a NIR Camera-Based Gaze Tracker

PubMed Central

Naqvi, Rizwan Ali; Arsalan, Muhammad; Park, Kang Ryoung

2017-01-01

Gaze-based interaction (GBI) techniques have been a popular subject of research in the last few decades. Among other applications, GBI can be used by persons with disabilities to perform everyday tasks, as a game interface, and can play a pivotal role in the human computer interface (HCI) field. While gaze tracking systems have shown high accuracy in GBI, detecting a user’s gaze for target selection is a challenging problem that needs to be considered while using a gaze detection system. Past research has used the blinking of the eyes for this purpose as well as dwell time-based methods, but these techniques are either inconvenient for the user or requires a long time for target selection. Therefore, in this paper, we propose a method for fuzzy system-based target selection for near-infrared (NIR) camera-based gaze trackers. The results of experiments performed in addition to tests of the usability and on-screen keyboard use of the proposed method show that it is better than previous methods. PMID:28420114

Getting under the skin of the primary care consultation using video stimulated recall: a systematic review.

PubMed

Paskins, Zoe; McHugh, Gretl; Hassell, Andrew B

2014-08-30

Video stimulated recall (VSR) is a method of enhancing participants' accounts of the consultation using a video recording of the event to encourage and prompt recall in a post consultation interview. VSR is used in education and education research, and to a lesser extent in medical and nursing research. Little is known about the sort of research questions that lend themselves best to the use of VSR or the impact of the specific VSR procedure on study quality. This systematic review describes studies in primary care that have used the method and aims to identify the strengths, weaknesses and role of VSR. A systematic literature search has been conducted to identify primary care consultation research using VSR. Two authors undertook data extraction and quality appraisal of identified papers and a narrative synthesis has been conducted to draw together the findings. In addition, theory on classifying VSR procedures derived from other disciplines is used as a lens through which to assess the relevance of VSR technique. Twenty eight publications were identified that reported VSR in primary care doctor-patient consultation research. VSR was identified as a useful method to explore specific events within the consultation, mundane or routine occurrences, non-spoken events and appears to particularly add value to doctor's post consultation accounts. However, studies frequently had insufficient description of methods to properly evaluate both the quality of the study, and the influence of VSR technique on findings. VSR is particularly useful for study of specific consultation events when a 'within case' approach is used in analysis, comparing and contrasting findings from the consultation and post-consultation interview. Alignment of the choice of VSR procedure and sampling to the study research question was established as particularly important in the quality of studies. Future researchers may consider the role of process evaluation to understand further the impact of research design on data yielded and the acceptability of the method to participants.

Resource for the Development of Biomedical Accelerator Mass Spectrometry (AMS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tuerteltaub, K. W.; Bench, G.; Buchholz, B. A.

The NIH Research Resource for Biomedical AMS was originally funded at Lawrence Livermore National Laboratory in 1999 to develop and apply the technology of accelerator mass spectrometry (AMS) in broad- based biomedical research. The Resource’s niche is to fill needs for ultra high sensitivity quantitation when isotope-labeled agents are used. The Research Resource’s Technology Research and Development (TR&D) efforts will focus on the needs of the biomedical research community in the context of seven Driving Biomedical Projects (DBPs) that will drive the Center’s technical capabilities through three core TR&Ds. We will expand our present capabilities by developing a fully integratedmore » HPLC AMS to increase our capabilities for metabolic measurements, we will develop methods to understand cellular processes and we will develop and validate methods for the application of AMS in human studies, which is a growing area of demand by collaborators and service users. In addition, we will continue to support new and ongoing collaborative and service projects that require the capabilities of the Resource. The Center will continue to train researchers in the use of the AMS capabilities being developed, and the results of all efforts will be widely disseminated to advance progress in biomedical research. Towards these goals, our specific aims are to:1.) Increase the value and information content of AMS measurements by combining molecular speciation with quantitation of defined macromolecular isolates. Specifically, develop and validate methods for macromolecule labeling, characterization and quantitation.2.) Develop and validate methods and strategies to enable AMS to become more broadly used in human studies. Specifically, demonstrate robust methods for conducting pharmacokinetic/pharmacodynamics studies in humans and model systems.3.) Increase the accessibility of AMS to the Biomedical research community and the throughput of AMS through direct coupling to separatory instruments.4.) Provide high throughput 14C BioAMS analysis for collaborative and service clients.« less

Resource for the Development of Biomedical Accelerator Mass Spectrometry (AMS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turteltaub, K. W.; Bench, G.; Buchholz, B. A.

2016-04-08

The NIH Research Resource for Biomedical AMS was originally funded at Lawrence Livermore National Laboratory in 1999 to develop and apply the technology of accelerator mass spectrometry (AMS) in broad- based biomedical research. The Resource’s niche is to fill needs for ultra high sensitivity quantitation when isotope-labeled agents are used. The Research Resource’s Technology Research and Development (TR&D) efforts will focus on the needs of the biomedical research community in the context of seven Driving Biomedical Projects (DBPs) that will drive the Center’s technical capabilities through three core TR&Ds. We will expand our present capabilities by developing a fully integratedmore » HPLC AMS to increase our capabilities for metabolic measurements, we will develop methods to understand cellular processes and we will develop and validate methods for the application of AMS in human studies, which is a growing area of demand by collaborators and service users. In addition, we will continue to support new and ongoing collaborative and service projects that require the capabilities of the Resource. The Center will continue to train researchers in the use of the AMS capabilities being developed, and the results of all efforts will be widely disseminated to advance progress in biomedical research. Towards these goals, our specific aims are to:1.) Increase the value and information content of AMS measurements by combining molecular speciation with quantitation of defined macromolecular isolates. Specifically, develop and validate methods for macromolecule labeling, characterization and quantitation.2.) Develop and validate methods and strategies to enable AMS to become more broadly used in human studies. Specifically, demonstrate robust methods for conducting pharmacokinetic/pharmacodynamics studies in humans and model systems.3.) Increase the accessibility of AMS to the Biomedical research community and the throughput of AMS through direct coupling to separatory instruments.4.) Provide high throughput 14C BioAMS analysis for collaborative and service clients.« less

QUAGOL: a guide for qualitative data analysis.

PubMed

Dierckx de Casterlé, Bernadette; Gastmans, Chris; Bryon, Els; Denier, Yvonne

2012-03-01

Data analysis is a complex and contested part of the qualitative research process, which has received limited theoretical attention. Researchers are often in need of useful instructions or guidelines on how to analyze the mass of qualitative data, but face the lack of clear guidance for using particular analytic methods. The aim of this paper is to propose and discuss the Qualitative Analysis Guide of Leuven (QUAGOL), a guide that was developed in order to be able to truly capture the rich insights of qualitative interview data. The article describes six major problems researchers are often struggling with during the process of qualitative data analysis. Consequently, the QUAGOL is proposed as a guide to facilitate the process of analysis. Challenges emerged and lessons learned from own extensive experiences with qualitative data analysis within the Grounded Theory Approach, as well as from those of other researchers (as described in the literature), were discussed and recommendations were presented. Strengths and pitfalls of the proposed method were discussed in detail. The Qualitative Analysis Guide of Leuven (QUAGOL) offers a comprehensive method to guide the process of qualitative data analysis. The process consists of two parts, each consisting of five stages. The method is systematic but not rigid. It is characterized by iterative processes of digging deeper, constantly moving between the various stages of the process. As such, it aims to stimulate the researcher's intuition and creativity as optimal as possible. The QUAGOL guide is a theory and practice-based guide that supports and facilitates the process of analysis of qualitative interview data. Although the method can facilitate the process of analysis, it cannot guarantee automatic quality. The skills of the researcher and the quality of the research team remain the most crucial components of a successful process of analysis. Additionally, the importance of constantly moving between the various stages throughout the research process cannot be overstated. Copyright © 2011 Elsevier Ltd. All rights reserved.

Mixed methods research in the development and evaluation of complex interventions in palliative and end-of-life care: report on the MORECare consensus exercise.

PubMed

Farquhar, Morag; Preston, Nancy; Evans, Catherine J; Grande, Gunn; Short, Vicky; Benalia, Hamid; Higginson, Irene J; Todd, Chris

2013-12-01

Complex interventions are common in palliative and end-of-life care. Mixed methods approaches sit well within the multiphase model of complex intervention development and evaluation. Generic mixed methods guidance is useful but additional challenges in the research design and operationalization within palliative and end-of-life care may have an impact on the use of mixed methods. The objective of the study was to develop guidance on the best methods for combining quantitative and qualitative methods for health and social care intervention development and evaluation in palliative and end-of-life care. A one-day workshop was held where experts participated in facilitated groups using Transparent Expert Consultation to generate items for potential recommendations. Agreement and consensus were then sought on nine draft recommendations (DRs) in a follow-up exercise. There was at least moderate agreement with most of the DRs, although consensus was low. Strongest agreement was with DR1 (usefulness of mixed methods to palliative and end-of-life care) and DR5 (importance of attention to respondent burden), and least agreement was with DR2 (use of theoretical perspectives) and DR6 (therapeutic effects of research interviews). Narrative comments enabled recommendation refinement. Two fully endorsed, five partially endorsed, and two refined DRs emerged. The relationship of these nine to six key challenges of palliative and end-of-life care research was analyzed. There is a need for further discussion of these recommendations and their contribution to methodology. The recommendations should be considered when designing and operationalizing mixed methods studies of complex interventions in palliative care, and because they may have wider relevance, should be considered for other applications.

Bioinformatics by Example: From Sequence to Target

NASA Astrophysics Data System (ADS)

Kossida, Sophia; Tahri, Nadia; Daizadeh, Iraj

2002-12-01

With the completion of the human genome, and the imminent completion of other large-scale sequencing and structure-determination projects, computer-assisted bioscience is aimed to become the new paradigm for conducting basic and applied research. The presence of these additional bioinformatics tools stirs great anxiety for experimental researchers (as well as for pedagogues), since they are now faced with a wider and deeper knowledge of differing disciplines (biology, chemistry, physics, mathematics, and computer science). This review targets those individuals who are interested in using computational methods in their teaching or research. By analyzing a real-life, pharmaceutical, multicomponent, target-based example the reader will experience this fascinating new discipline.

Estimation of sample size and testing power (Part 4).

PubMed

Hu, Liang-ping; Bao, Xiao-lei; Guan, Xue; Zhou, Shi-guo

2012-01-01

Sample size estimation is necessary for any experimental or survey research. An appropriate estimation of sample size based on known information and statistical knowledge is of great significance. This article introduces methods of sample size estimation of difference test for data with the design of one factor with two levels, including sample size estimation formulas and realization based on the formulas and the POWER procedure of SAS software for quantitative data and qualitative data with the design of one factor with two levels. In addition, this article presents examples for analysis, which will play a leading role for researchers to implement the repetition principle during the research design phase.

Chicoric acid: chemistry, distribution, and production

NASA Astrophysics Data System (ADS)

Lee, Jungmin; Scagel, Carolyn

2013-12-01

Though chicoric acid was first identified in 1958, it was largely ignored until recent popular media coverage cited potential health beneficial properties from consuming food and dietary supplements containing this compound. To date, plants from at least 63 genera and species have been found to contain chicoric acid, and while the compound is used as a processing quality indicator, it may also have useful health benefits. This review of chicoric acid summarizes research findings and highlights gaps in research knowledge for investigators, industry stakeholders, and consumers alike. Additionally, chicoric acid identification and quantification methods, biosynthesis, processing improvements to increase chicoric acid retention, and potential areas for future research are discussed.

Chicoric acid: chemistry, distribution, and production.

PubMed

Lee, Jungmin; Scagel, Carolyn F

2013-01-01

Though chicoric acid was first identified in 1958, it was largely ignored until recent popular media coverage cited potential health beneficial properties from consuming food and dietary supplements containing this compound. To date, plants from at least 63 genera and species have been found to contain chicoric acid, and while the compound is used as a processing quality indicator, it may also have useful health benefits. This review of chicoric acid summarizes research findings and highlights gaps in research knowledge for investigators, industry stakeholders, and consumers alike. Additionally, chicoric acid identification, and quantification methods, biosynthesis, processing improvements to increase chicoric acid retention, and potential areas for future research are discussed.

Chicoric acid: chemistry, distribution, and production

PubMed Central

Lee, Jungmin; Scagel, Carolyn F.

2013-01-01

Though chicoric acid was first identified in 1958, it was largely ignored until recent popular media coverage cited potential health beneficial properties from consuming food and dietary supplements containing this compound. To date, plants from at least 63 genera and species have been found to contain chicoric acid, and while the compound is used as a processing quality indicator, it may also have useful health benefits. This review of chicoric acid summarizes research findings and highlights gaps in research knowledge for investigators, industry stakeholders, and consumers alike. Additionally, chicoric acid identification, and quantification methods, biosynthesis, processing improvements to increase chicoric acid retention, and potential areas for future research are discussed. PMID:24790967

Potential for reduction of odorous compounds in swine manure through diet modification.

PubMed

Sutton, A L; Kephart, K B; Verstegen, M W; Canh, T T; Hobbs, P J

1999-02-01

Recent public concern about air pollution from pork production units has prompted more research to develop methods to reduce and control odors. Masking agents, enzymes and bacterial preparations, feed additives, chemicals, oxidation processes, air scrubbers, biofilters, and new ventilation systems have been studied. Research relating the effects of the swine diet on manure odors has been scarce. Introducing feed additives to bind ammonia, change digesta pH, affect specific enzyme activity, and mask odors has been either costly or not consistently successful. Recent research emphasis has focused on manipulating the diet 1) to increase the nutrient utilization of the diet to reduce excretion products, 2) to enhance microbial metabolism in the lower digestive tract to reduce excretion of odor-causing compounds, and 3) to change the physical characteristics of urine and feces to reduce odor emissions. Primary odor-causing compounds evolve from excess degradable proteins and lack of specific fermentable carbohydrates during microbial fermentation. Reductions in ammonia emissions by 28 to 79% through diet modifications have been reported. Limited research on reduction of other odorous volatile organic compounds through diet modifications is promising. Use of synthetic amino acids with reduced intact protein levels in diets significantly reduces nitrogen excretions and odor production. Addition of nonstarch polysaccharides and specific oligosaccharides further alters the pathway of nitrogen excretion and reduces odor emission. Continued nutritional and microbial research to incorporate protein degradation products, especially sulfur-containing organics, with fermentable carbohydrates in the lower gastrointestinal tract of pigs will further control odors from manure.

A guide to the synthesis of block copolymers using reversible-addition fragmentation chain transfer (RAFT) polymerization.

PubMed

Keddie, Daniel J

2014-01-21

The discovery of reversible-deactivation radical polymerization (RDRP) has provided an avenue for the synthesis of a vast array of polymers with a rich variety of functionality and architecture. The preparation of block copolymers has received significant focus in this burgeoning research field, due to their diverse properties and potential in a wide range of research environments. This tutorial review will address the important concepts behind the design and synthesis of block copolymers using reversible addition-fragmentation chain transfer (RAFT) polymerization. RAFT polymerization is arguably the most versatile of the RDRP methods due to its compatibility with a wide range of functional monomers and reaction media along with its relative ease of use. With an ever increasing array of researchers that possess a variety of backgrounds now turning to RDRP, and RAFT in particular, to prepare their required polymeric materials, it is pertinent to discuss the important points which enable the preparation of high purity functional block copolymers with targeted molar mass and narrow molar mass distribution using RAFT polymerization. The key principles of appropriate RAFT agent selection, the order of monomer addition in block synthesis and potential issues with maintaining high end-group fidelity are addressed. Additionally, techniques which allow block copolymers to be accessed using a combination of RAFT polymerization and complementary techniques are touched upon.

Formulation and Evaluation of Mouth Dissolving Tablets of Cinnarizine

PubMed Central

Patel, B. P.; Patel, J. K.; Rajput, G. C.; Thakor, R. S.

2010-01-01

The purpose of this research was to develop mouth dissolve tablets of cinnarizine by effervescent, superdisintegrant addition and sublimation methods. All the three formulations were evaluated for disintegration time, hardness and friability, among these superdisintegrant addition method showed lowest disintegration time; hence it was selected for further studies. Further nine batches (B1-B9) were prepared by using crospovidone, croscarmellose sodium and L-HPC in different concentrations such as 5, 7.5 and 10%. All the formulations were evaluated for weight variation, hardness, friability, drug content, in vitro disintegration time, wetting time, in vitro dissolution. Formulation with 10% L-HPC showed the less disintegration time (25.3 s) and less wetting time (29.1 s). In vitro dissolution studies showed total drug release at the end of 6 min. PMID:21218071

Humic Acid Isolations from Lignite by Ion Exchange Method

NASA Astrophysics Data System (ADS)

Kurniati, E.; Muljani, S.; Virgani, D. G.; Neno, B. P.

2018-01-01

The humic liquid is produced from lignite extraction using alkali solution. Conventional humic acid is obtained by acidifying a humic solution using HCl. The purpose of this research is the formation of solid humic acid from lignite by ion exchange method using cation resin. The results showed that the addition of cation resin was able to reduce the pH from 14 to pH 2 as well as the addition of acid (HCl), indicating the exchange of Na + ions with H + ions. The reduction of pH in the humic solution is influenced by the concentration of sodium ions in the humic solution, the weight of the cation resin, and the ion exchange time. The IR spectra results are in good agreement for humic acid from lignite characterization.

The importance of national and international collaboration in adult congenital heart disease: A network analysis of research output.

PubMed

Orwat, Melanie Iris; Kempny, Aleksander; Bauer, Ulrike; Gatzoulis, Michael A; Baumgartner, Helmut; Diller, Gerhard-Paul

2015-09-15

The determinants of adult congenital heart disease (ACHD) research output are only partially understood. The heterogeneity of ACHD naturally calls for collaborative work; however, limited information exists on the impact of collaboration on academic performance. We aimed to examine the global topology of ACHD research, distribution of research collaboration and its association with cumulative research output. Based on publications presenting original research between 2005 and 2011, a network analysis was performed quantifying centrality measures and key players in the field of ACHD. In addition, network maps were produced to illustrate the global distribution and interconnected nature of ACHD research. The proportion of collaborative research was 35.6 % overall, with a wide variation between countries (7.1 to 62.8%). The degree of research collaboration, as well as measures of network centrality (betweenness and degree centrality), were statistically associated with cumulative research output independently of national wealth and available workforce. The global ACHD research network was found to be scale-free with a small number of central hubs and a relatively large number of peripheral nodes. In addition, we could identify potentially influential hubs based on cluster analysis and measures of centrality/key player analysis. Using network analysis methods the current study illustrates the complex and global structures of ACHD research. It suggests that collaboration between research institutions is associated with higher academic output. As a consequence national and international collaboration in ACHD research should be encouraged and the creation of an adequate supporting infrastructure should be further promoted. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

The effects of noise on the cognitive performance of physicians in a hospital emergency department

NASA Astrophysics Data System (ADS)

Dodds, Peter

In this research, the acoustic environment of a contemporary urban hospital emergency department has been characterized. Perceptive and cognitive tests relating to the acoustic environment were conducted on both medical professionals and lay people and a methodology for developing augmentable acoustic simulations from field recordings was developed. While research of healthcare environments remains a popular area of investigation for the acoustics community, a lack of communication between medical and acoustics researchers as well as a lack of sophistication in the methods implemented to evaluate hospital environments and their occupants has led to stagnation. This research attempted to replicate traditional methods for the evaluation of hospital acoustic environments including impulse response based room acoustics measurements as well as psychoacoustic evaluations. This thesis also demonstrates some of the issues associated with conducting such research and provides an outline and implementation for alternative advanced methods of re- search. Advancements include the use of the n-Back test to evaluate the effects of the acoustic environment on cognitive function as well as the outline of a new methodology for implementing realistic immersive simulations for cognitive and perceptual testing using field recordings and signal processing techniques. Additionally, this research utilizes feedback from working emergency medicine physicians to determine the subjective degree of distraction subjects felt in response to a simulated acoustic environment. Results of the room acoustics measurements and all experiments will be presented and analyzed and possible directions for future research will be presented.

Comparison of Internet versus lecture instructional methods for teaching nursing research.

PubMed

Woo, M A; Kimmick, J V

2000-01-01

Although many higher education programs are using the Internet to teach classes, there are few published reports on the effectiveness of this method on test scores or student satisfaction. The purpose of this study was to compare test and student satisfaction scores of graduate nursing students who take a nursing research course via the Internet with those of students who take the same course via traditional lecture instruction. In addition, student technical support use and Internet student lecture attendance also were examined. A total of 97 students (Internet, 44; lectures, 53) participated. There were no significant differences in test scores and overall course student satisfaction (P > .05). However, the Internet students reported significantly higher (P = .04) stimulation of learning compared with the traditional lecture students. Technical support use by the Internet students was high initially and was related to software problems. Of interest were the large proportion of Internet students (73 percent) who attended at least 3 of the 10 lectures. Use of the Internet to teach graduate-level nursing research can provide comparable learning and student satisfaction to traditional lecture instructional methods.

The engagement of children with disabilities in health-related technology design processes: identifying methodology.

PubMed

Allsop, Matthew J; Holt, Raymond J; Levesley, Martin C; Bhakta, Bipinchandra

2010-01-01

This review aims to identify research methodology that is suitable for involving children with disabilities in the design of healthcare technology, such as assistive technology and rehabilitation equipment. A review of the literature included the identification of methodology that is available from domains outside of healthcare and suggested a selection of available methods. The need to involve end users within the design of healthcare technology was highlighted, with particular attention to the need for greater levels of participation from children with disabilities within all healthcare research. Issues that may arise when trying to increase such involvement included the need to consider communication via feedback and tailored information, the need to measure levels of participation occurring in current research, and caution regarding the use of proxy information. Additionally, five suitable methods were highlighted that are available for use with children with disabilities in the design of healthcare technology. The methods identified in the review need to be put into practice to establish effective and, if necessary, novel ways of designing healthcare technology when end users are children with disabilities.

Nontechnical skill training and the use of scenarios in modern surgical education.

PubMed

Brunckhorst, Oliver; Khan, Muhammad S; Dasgupta, Prokar; Ahmed, Kamran

2017-07-01

Nontechnical skills are being increasingly recognized as a core reason of surgical errors. Combined with the changing nature of surgical training, there has therefore been an increase in nontechnical skill research in the literature. This review therefore aims to: define nontechnical skillsets, assess current training methods, explore assessment modalities and suggest future research aims. The literature demonstrates an increasing understanding of the components of nontechnical skills within surgery. This has led to a greater availability of validated training methods for its training, including the use of didactic teaching, e-learning and simulation-based scenarios. In addition, there are now various extensively validated assessment tools for nontechnical skills including NOTSS, the Oxford NOTECHS and OTAS. Finally, there is now more focus on the development of tools which target individual nontechnical skill components and an attempt to understand which of these play a greater role in specific procedures such as laparoscopic or robotic surgery. Current evidence demonstrates various training methods and tools for the training of nontechnical skills. Future research is likely to focus increasingly on individual nontechnical skill components and procedure-specific skills.

PredPsych: A toolbox for predictive machine learning-based approach in experimental psychology research.

PubMed

Koul, Atesh; Becchio, Cristina; Cavallo, Andrea

2017-12-12

Recent years have seen an increased interest in machine learning-based predictive methods for analyzing quantitative behavioral data in experimental psychology. While these methods can achieve relatively greater sensitivity compared to conventional univariate techniques, they still lack an established and accessible implementation. The aim of current work was to build an open-source R toolbox - "PredPsych" - that could make these methods readily available to all psychologists. PredPsych is a user-friendly, R toolbox based on machine-learning predictive algorithms. In this paper, we present the framework of PredPsych via the analysis of a recently published multiple-subject motion capture dataset. In addition, we discuss examples of possible research questions that can be addressed with the machine-learning algorithms implemented in PredPsych and cannot be easily addressed with univariate statistical analysis. We anticipate that PredPsych will be of use to researchers with limited programming experience not only in the field of psychology, but also in that of clinical neuroscience, enabling computational assessment of putative bio-behavioral markers for both prognosis and diagnosis.

Biomedical coatings on magnesium alloys - a review.

PubMed

Hornberger, H; Virtanen, S; Boccaccini, A R

2012-07-01

This review comprehensively covers research carried out in the field of degradable coatings on Mg and Mg alloys for biomedical applications. Several coating methods are discussed, which can be divided, based on the specific processing techniques used, into conversion and deposition coatings. The literature review revealed that in most cases coatings increase the corrosion resistance of Mg and Mg alloys. The critical factors determining coating performance, such as corrosion rate, surface chemistry, adhesion and coating morphology, are identified and discussed. The analysis of the literature showed that many studies have focused on calcium phosphate coatings produced either using conversion or deposition methods which were developed for orthopaedic applications. However, the control of phases and the formation of cracks still appear unsatisfactory. More research and development is needed in the case of biodegradable organic based coatings to generate reproducible and relevant data. In addition to biocompatibility, the mechanical properties of the coatings are also relevant, and the development of appropriate methods to study the corrosion process in detail and in the long term remains an important area of research. Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Building and critiquing qualitative research websites: a cyberspace project to connect undergraduate nursing students in Canada and the United States.

PubMed

Teel, Cynthia S; Shaw, Judith A

2005-01-01

This project had a dual purpose: 1) to facilitate student learning about qualitative research methods, and 2) to promote collegiality and professional development among senior nursing students in Canada and the United States through the use of distance technology. In each of three project years, students at St. Francis Xavier University (STFX) in Nova Scotia initiated the experience by working in small groups to develop websites about different methodological approaches in qualitative research. Site information included an overview of the selected approach, discussion of trustworthiness issues, citation of journal articles in which authors used the approach, additional references, and some personal information about the student developers. Also working in small groups, University of Kansas students identified and read related research articles, reviewed website information, and responded to the STFX groups about the usefulness of site information in increasing understanding of qualitative methods and using the information for evaluation of research. The experience promoted active use of qualitative research concepts and facilitated the development of skills in evaluating research article content and website content. Participation in the activity fostered positive perceptions about the value and use of research and helped students appreciate the similarities in courses, programs, and professional requirements and values among international peers.

Patient engagement in Canada: a scoping review of the 'how' and 'what' of patient engagement in health research.

PubMed

Manafo, Elizabeth; Petermann, Lisa; Mason-Lai, Ping; Vandall-Walker, Virginia

2018-02-07

Over the last 10 years, patient engagement in health research has emerged as the next evolution in healthcare research. However, limited evidence about the clear role and scope of patient engagement in health research and a lack of evidence about its impact have influenced the uptake, implementation and ongoing evolution of patient engagement. The present study aims to conduct a scoping review to identify methods for and outcomes of patient engagement in health research. An adaptation of the scoping review methodology originally described by Arksey and O'Malley and updated by Levac, Colquhoun and O'Brien was applied. Sources from a formal database search and relevant documents from a grey literature search were compiled into data extraction tables. Articles were synthesised into key themes according to the (1) methods and (2) outcomes of patient engagement in health research. The total yield for the scoping review was 55 records from across Canada, the United Kingdom and the United States. While evidence about the methods used to engage patients in health research is increasing, stronger evidence of specific patient and healthcare system outcomes is required. This necessitates further mobilisation of research that explores outcomes and that validates specific tools to evaluate engagement. Additionally, theoretical frameworks that can better inform and sustain patient engagement across the lifecycle of health research are lacking. Further increasing the volume and reach of evidence about patient engagement in health research will support the paradigmatic shift needed to normalise the patient's role in research beyond 'subject' or 'participant', so as to ultimately improve patient health outcomes and better address healthcare reform in Canada.

Various oils and detergents enhance the microbial production of farnesol and related prenyl alcohols.

PubMed

Muramatsu, Masayoshi; Ohto, Chikara; Obata, Shusei; Sakuradani, Eiji; Shimizu, Sakayu

2008-09-01

The object of this research was improvement of prenyl alcohol production with squalene synthase-deficient mutant Saccharomyces cerevisiae ATCC 64031. On screening of many kinds of additives, we found that oils and detergents significantly enhanced the extracellular production of prenyl alcohols. Soybean oil showed the most prominent effect among the additives tested. Its effect was accelerated by a high concentration of glucose in the medium. The combination of these cultivation conditions led to the production of more than 28 mg/l of farnesol in the soluble fraction of the broth. The addition of these compounds to the medium was an effective method for large-scale production of prenyl alcohols with microorganisms.

Additivity and maximum likelihood estimation of nonlinear component biomass models

Treesearch

David L.R. Affleck

2015-01-01

Since Parresol's (2001) seminal paper on the subject, it has become common practice to develop nonlinear tree biomass equations so as to ensure compatibility among total and component predictions and to fit equations jointly using multi-step least squares (MSLS) methods. In particular, many researchers have specified total tree biomass models by aggregating the...

Teachers' Opinions about Building a Democratic Classroom

ERIC Educational Resources Information Center

Kesici, Sahin

2008-01-01

The purpose of this study is to determine how to build a democratic classroom in terms of teachers' views. In this study, the qualitative research technique is applied. In addition, the semi-structured interview technique is used as a method of data collection. The data obtained are coded into Nvivo2 and then the following themes are established:…

Selected Results of a Cross-Sectional/Longitudinal Research on Sex-Role Development in German Children.

ERIC Educational Resources Information Center

Trautner, Hanns Martin

Following an outline of the theoretical approach and method of a study of components of sex role development among German children, results which concern ontogenetic changes in sex role stereotypes preferences are presented. In addition, interrelations of different components of sex role development and cognitive variables are analyzed. The…

Collaborative Course Syllabus Construction: Impact on Consultative Competency of Graduate Students in School Psychology

ERIC Educational Resources Information Center

Camilli, Andrea Lauren

2009-01-01

Consultation has emerged as an effective alternative to traditional methods of service delivery in schools. Additionally, current research and recent changes in legislation (e.g., reauthorization of IDEA) indicate that not only is consultation an effective approach to service delivery, but it is a preferred activity of school psychologists and an…

Reconceptualizing Pedagogical Usability of and Teachers' Roles in Computer Game-Based Learning in School

ERIC Educational Resources Information Center

Tzuo, Pei-Wen; Ling, Jennifer Isabelle Ong Pei; Yang, Chien-Hui; Chen, Vivian Hsueh-Hua

2012-01-01

At present, methods for the optimal use of two approaches to computer game-based learning in school to enhance students' learning, namely, computer game play and game design, are obscure because past research has been devoted more to designing rather than evaluating the implementation of these approaches in school. In addition, most studies…

Validating the Novel Method of Measuring Cortisol Levels in Cetacean Skin by use of an ACTH Challenge in Bottlenose Dolphins

DTIC Science & Technology

2014-09-30

hours, in addition to other manipulations (e.g. blubber biopsies). This process has shown to significantly raise both cortisol and aldosterone above...cetacean skin samples will bring new possibilities for stress assessment in cetaceans, opening up a new avenue of research in physiological response

Development of DHQ II Nutrient & Food Group Database | EGRP/DCCPS/NCI/NIH

Cancer.gov

Links to publications describing methods used to create values for the Diet History Questionnaire II (DHQ II) database using NHANES data and the addition of nutrients from the University of Minnesota’s Nutrition Data System for Research (NDS-R). The process used to create the Canadian DHQ II database is also described.

Innovation and Change: Great Ceramics from the Ceramics Research Center, Arizona State University Art Museum Collection

ERIC Educational Resources Information Center

Johnson, Mark M.

2009-01-01

Clay is one of the oldest materials known to humanity and has been used for utilitarian purposes and creative expression since prehistoric times. As civilizations evolved, ceramic materials, techniques, purposes and design all became more sophisticated and expressive. With the addition of different minerals and firing methods, clay was used to…

Identifying Mechanisms of Change in a Conversation Therapy for Aphasia Using Behaviour Change Theory and Qualitative Methods

ERIC Educational Resources Information Center

Johnson, Fiona M.; Best, Wendy; Beckley, Firle Christina; Maxim, Jane; Beeke, Suzanne

2017-01-01

Background: Conversation therapy for aphasia is a complex intervention comprising multiple components and targeting multiple outcomes. UK Medical Research Council (MRC) guidelines published in 2008 recommend that in addition to measuring the outcomes of complex interventions, evaluation should seek to clarify how such outcomes are produced,…

Publishing an Article: The Goal for a Graduate Course

ERIC Educational Resources Information Center

Hilke, Michael

2013-01-01

This essay discusses the effectiveness of a graduate course for physics students, with a course goal to write a publishable article on a modern research topic (graphene). I analyze the tools used to this end, which included Web 2.0 methods, in-class discussions and presentations, as well as extensive peer-review. In addition to producing a…

Exploring RTI Reading Intervention for Hispanic English Learning Kindergarten Students in Central Alabama: A Mixed Methods Study

ERIC Educational Resources Information Center

Hill, Kelly Leah

2013-01-01

This study addressed issues in implementing RTI Tier II reading intervention in kindergarten classrooms which contained Hispanic students learning English. In addition, the scope of reading progress of Hispanic students learning English was explored. The purpose of this research was to examine the frequency in providing RTI reading interventions…

The Utility of School-Age Narrative Microstructure Indices: INMIS and the Proportion of Restricted Utterances

ERIC Educational Resources Information Center

Hoffman, LaVae M.

2009-01-01

Purpose: This research investigated the applicability of the index of narrative microstructure (INMIS; L. M. Justice et al., 2006) system for narratives that were elicited through a wordless picture book context. In addition, the viability of an alternative, simpler metric was explored. Method: Narrative transcripts using the "Frog, Where Are…

A Study on Basic Process Skills of Turkish Primary School Students

ERIC Educational Resources Information Center

Aydogdu, Bulent

2017-01-01

Purpose: The purpose of this study was to find out primary school students' basic process skills (BPSs) in terms of select variables. In addition, this study aims to investigate the relationship between BPSs and academic achievement. Research Methods: The study had a survey design and was conducted with 1272 primary school students. The study data…

A Mixed Methods Approach to Investigating Cognitive Load and Cognitive Presence in an Online and Face-to-Face College Algebra Course

ERIC Educational Resources Information Center

Mills, Jodi Jean

2016-01-01

Most research on Cognitive Load Theory (Sweller, 1988) has uncovered many instructional design considerations for learning complex tasks. Additionally, the Community of Inquiry (Garrison, Anderson, & Archer, 2000) framework describes many of the learning experiences in online education. A gap existed in the literature for investigating…

Graphical Man/Machine Communications

DTIC Science & Technology

1972-12-01

several others. The principal accomplishments are the development of a homomorphic imane deblurring method by E. Randolph Cole, the research into human...visual modelling by Patrick Baudelair, the impressive demonstrations of background noise elimination by Neil J. Miller, and the innovation of...characteristics for the homomorphical ly estimated restoration filter in the presence of additive noise were derived, and they show that the