Enforced Sparse Non-Negative Matrix Factorization

DTIC Science & Technology

2016-01-23

documents to find interesting pieces of information. With limited resources, analysts often employ automated text - mining tools that highlight common...represented as an undirected bipartite graph. It has become a common method for generating topic models of text data because it is known to produce good results...model and the convergence rate of the underlying algorithm. I. Introduction A common analyst challenge is searching through large quantities of text

Optimal platform design using non-dominated sorting genetic algorithm II and technique for order of preference by similarity to ideal solution; application to automotive suspension system

NASA Astrophysics Data System (ADS)

Shojaeefard, Mohammad Hassan; Khalkhali, Abolfazl; Faghihian, Hamed; Dahmardeh, Masoud

2018-03-01

Unlike conventional approaches where optimization is performed on a unique component of a specific product, optimum design of a set of components for employing in a product family can cause significant reduction in costs. Increasing commonality and performance of the product platform simultaneously is a multi-objective optimization problem (MOP). Several optimization methods are reported to solve these MOPs. However, what is less discussed is how to find the trade-off points among the obtained non-dominated optimum points. This article investigates the optimal design of a product family using non-dominated sorting genetic algorithm II (NSGA-II) and proposes the employment of technique for order of preference by similarity to ideal solution (TOPSIS) method to find the trade-off points among the obtained non-dominated results while compromising all objective functions together. A case study for a family of suspension systems is presented, considering performance and commonality. The results indicate the effectiveness of the proposed method to obtain the trade-off points with the best possible performance while maximizing the common parts.

How the Television Show "Mythbusters" Communicates the Scientific Method

ERIC Educational Resources Information Center

Zavrel, Erik; Sharpsteen, Eric

2016-01-01

The importance of understanding and internalizing the scientific method can hardly be exaggerated. Unfortunately, it is all too common for high school--and even university--students to graduate with only a partial or oversimplified understanding of what the scientific method is and how to actually employ it. Help in remedying this situation may…

How Learning Designs, Teaching Methods and Activities Differ by Discipline in Australian Universities

ERIC Educational Resources Information Center

Cameron, Leanne

2017-01-01

This paper reports on the learning designs, teaching methods and activities most commonly employed within the disciplines in six universities in Australia. The study sought to establish if there were significant differences between the disciplines in learning designs, teaching methods and teaching activities in the current Australian context, as…

USSR Report, Earth Sciences, No. 24

DTIC Science & Technology

1983-02-01

In investigating the gas and aerosol components of the atmosphere it is common to use the Bouguer method, employing the radiation flux in the...the direction to the sun and the relative error in determining the optical thickness of the atmosphere by the Bouguer method does not exceed 1

Rapid qualitative and quantitative analysis of proanthocyanidin oligomers and polymers by UPLC-MS/MS

USDA-ARS?s Scientific Manuscript database

Proanthocyanidins (PAs) are a structurally complex and bioactive group of tannins. Detailed analysis of PA concentration, composition, and structure typically requires the use of one or more time-consuming analytical methods. For example, the commonly employed thiolysis and phloroglucinolysis method...

Comparison of employer productivity metrics to lost productivity estimated by commonly used questionnaires

PubMed Central

Gardner, Bethany T.; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C.; Evanoff, Bradley

2016-01-01

Objective To assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Methods 58 billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Results Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Conclusions Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss. PMID:26849261

A Comparison of Three Approaches to Correct for Direct and Indirect Range Restrictions: A Simulation Study

ERIC Educational Resources Information Center

Pfaffel, Andreas; Schober, Barbara; Spiel, Christiane

2016-01-01

A common methodological problem in the evaluation of the predictive validity of selection methods, e.g. in educational and employment selection, is that the correlation between predictor and criterion is biased. Thorndike's (1949) formulas are commonly used to correct for this biased correlation. An alternative approach is to view the selection…

Fetal MRI: A Technical Update with Educational Aspirations

PubMed Central

Gholipour, Ali; Estroff, Judith A.; Barnewolt, Carol E.; Robertson, Richard L.; Grant, P. Ellen; Gagoski, Borjan; Warfield, Simon K.; Afacan, Onur; Connolly, Susan A.; Neil, Jeffrey J.; Wolfberg, Adam; Mulkern, Robert V.

2015-01-01

Fetal magnetic resonance imaging (MRI) examinations have become well-established procedures at many institutions and can serve as useful adjuncts to ultrasound (US) exams when diagnostic doubts remain after US. Due to fetal motion, however, fetal MRI exams are challenging and require the MR scanner to be used in a somewhat different mode than that employed for more routine clinical studies. Herein we review the techniques most commonly used, and those that are available, for fetal MRI with an emphasis on the physics of the techniques and how to deploy them to improve success rates for fetal MRI exams. By far the most common technique employed is single-shot T2-weighted imaging due to its excellent tissue contrast and relative immunity to fetal motion. Despite the significant challenges involved, however, many of the other techniques commonly employed in conventional neuro- and body MRI such as T1 and T2*-weighted imaging, diffusion and perfusion weighted imaging, as well as spectroscopic methods remain of interest for fetal MR applications. An effort to understand the strengths and limitations of these basic methods within the context of fetal MRI is made in order to optimize their use and facilitate implementation of technical improvements for the further development of fetal MR imaging, both in acquisition and post-processing strategies. PMID:26225129

Downsizing: A Necessary Management Evil?

ERIC Educational Resources Information Center

White, Raholanda

1992-01-01

Discusses the merits and methods of downsizing, the process of eliminating unnecessary costs and unprofitable operations from an organization, and examines commonly used, effective strategies that will minimize the hardship on both employers and employees. (JOW)

The influence of solvent processing on polyester bioabsorbable polymers.

PubMed

Manson, Joanne; Dixon, Dorian

2012-01-01

Solvent-based methods are commonly employed for the production of polyester-based samples and coatings in both medical device production and research. The influence of solvent casting and subsequent drying time was studied using thermal analysis, spectroscopy and weight measurement for four grades of 50 : 50 poly(lactic-co-glycolic acid) (PLGA) produced by using chloroform, dichloromethane, and acetone. The results demonstrate that solvent choice and PLGA molecular weight are critical factors in terms of solvent removal rate and maintaining sample integrity, respectively. The protocols widely employed result in high levels of residual solvent and a new protocol is presented together with solutions to commonly encountered problems.

Shear velocity criterion for incipient motion of sediment

USGS Publications Warehouse

Simoes, Francisco J.

2014-01-01

The prediction of incipient motion has had great importance to the theory of sediment transport. The most commonly used methods are based on the concept of critical shear stress and employ an approach similar, or identical, to the Shields diagram. An alternative method that uses the movability number, defined as the ratio of the shear velocity to the particle’s settling velocity, was employed in this study. A large amount of experimental data were used to develop an empirical incipient motion criterion based on the movability number. It is shown that this approach can provide a simple and accurate method of computing the threshold condition for sediment motion.

The Reality of Virtual Schools: A Review of the Literature

ERIC Educational Resources Information Center

Barbour, Michael K.; Reeves, Thomas C.

2009-01-01

Virtual schooling was first employed in the mid-1990s and has become a common method of distance education used in K-12 jurisdictions. The most accepted definition of a virtual school is an entity approved by a state or governing body that offers courses through distance delivery--most commonly using the Internet. While virtual schools can be…

Prenotification, Incentives, and Survey Modality: An Experimental Test of Methods to Increase Survey Response Rates of School Principals

ERIC Educational Resources Information Center

Jacob, Robin Tepper; Jacob, Brian

2012-01-01

Teacher and principal surveys are among the most common data collection techniques employed in education research. Yet there is remarkably little research on survey methods in education, or about the most cost-effective way to raise response rates among teachers and principals. In an effort to explore various methods for increasing survey response…

A Mirror for Managers: Using Simulation to Develop Management Teams. Technical Report 23.

ERIC Educational Resources Information Center

Kaplan, Robert E.; And Others

Although simulation is among the least common of the many methods consultants employ to stimulate team development, realistic simulation can help in the diagnosis of management teams. Simulations fill a gap in the repertoire of data collection methods for organizational diagnosis and development by affording an opportunity for direct observation…

Link prediction with node clustering coefficient

NASA Astrophysics Data System (ADS)

Wu, Zhihao; Lin, Youfang; Wang, Jing; Gregory, Steve

2016-06-01

Predicting missing links in incomplete complex networks efficiently and accurately is still a challenging problem. The recently proposed Cannistrai-Alanis-Ravai (CAR) index shows the power of local link/triangle information in improving link-prediction accuracy. Inspired by the idea of employing local link/triangle information, we propose a new similarity index with more local structure information. In our method, local link/triangle structure information can be conveyed by clustering coefficient of common-neighbors directly. The reason why clustering coefficient has good effectiveness in estimating the contribution of a common-neighbor is that it employs links existing between neighbors of a common-neighbor and these links have the same structural position with the candidate link to this common-neighbor. In our experiments, three estimators: precision, AUP and AUC are used to evaluate the accuracy of link prediction algorithms. Experimental results on ten tested networks drawn from various fields show that our new index is more effective in predicting missing links than CAR index, especially for networks with low correlation between number of common-neighbors and number of links between common-neighbors.

Force Enhancement Packages for Countering Nuclear Threats in the 2022-2027 Time Frame

DTIC Science & Technology

2015-09-01

characterization methods . • Apply proper radioisotope identification techniques. c. A one-week CNT operations exercise at Fort Belvoir, Virginia. Team members...on experiments to seek better methods , holding active teaching until later. The team expects that better methods would involve collection using...conduct more effective wide-area searches than those commonly employed by civil law enforcement agencies. The IDA team suggests that better methods

Informal employment in high-income countries for a health inequalities research: A scoping review.

PubMed

Julià, Mireia; Tarafa, Gemma; O'Campo, Patricia; Muntaner, Carles; Jódar, Pere; Benach, Joan

2015-01-01

Informal employment (IE) is one of the least studied employment conditions in public health research, mainly due to the difficulty of its conceptualization and its measurement, producing a lack of a unique concept and a common method of measurement. The aim of this review is to identify literature on IE in order to improve its definition and methods of measurement, with special attention given to high-income countries, to be able to study the possible impact on health inequalities within and between countries. A scoping review of definitions and methods of measurement of IE was conducted reviewing relevant databases and grey literature and analyzing selected articles. We found a wide spectrum of terms for describing IE as well as definitions and methods of measurement. We provide a definition of IE to be used in health inequalities research in high-income countries. Direct methods such as surveys can capture more information about workers and firms in order to estimate IE. These results can be used in further investigations about the impacts of this IE on health inequalities. Public health research must improve monitoring and analysis of IE in order to know the impacts of this employment condition on health inequalities.

The benefits of paid employment among persons with common mental health problems: evidence for the selection and causation mechanism.

PubMed

Schuring, Merel; Robroek, Suzan Jw; Burdorf, Alex

2017-11-01

Objectives The aims of this study were to (i) investigate the impact of paid employment on self-rated health, self-esteem, mastery, and happiness among previously unemployed persons with common mental health problems, and (ii) determine whether there are educational inequalities in these effects. Methods A quasi-experimental study was performed with a two-year follow-up period among unemployed persons with mental health problems. Eligible participants were identified at the social services departments of five cities in The Netherlands when being diagnosed with a common mental disorder, primarily depression and anxiety disorders, in the past 12 months by a physician (N=749). Employment status (defined as paid employment for ≥12 hours/week), mental health [Short Form 12 (SF-12)], physical health (SF-12), self-esteem, mastery, and happiness were measured at baseline, after 12 months and 24 months. The repeated-measurement longitudinal data were analyzed using a hybrid method, combining fixed and random effects. The regression coefficient was decomposed into between- and within-individual associations, respectively. Results The between-individuals associations showed that persons working ≥12 hours per week reported better mental health (b=26.7, SE 5.1), mastery (b=2.7, SE 0.6), self-esteem (b=5.7, SE 1.1), physical health (b=14.6, SE 5.6) and happiness (OR 7.7, 95% CI 2.3-26.4). The within-individual associations showed that entering paid employment for ≥12 hours per week resulted in better mental health (b=16.3, SE 3.4), mastery (b=1.7, SE 0.4), self-esteem (b=3.4, SE 0.7), physical health (b=9.8, SE 2.9), and happiness (OR 3.1, 95% CI 1.4-6.9). Among intermediate- and high-educated persons, entering paid employment had significantly larger effect on mental health than among low-educated persons. Conclusions This study provides evidence that entering paid employment has a positive impact on self-reported health; thus work should be considered as an important part of health promotion programs among unemployed persons.

Suicide in Northern Ireland: An Analysis of Gender Differences in Demographic, Psychological, and Contextual Factors.

PubMed

O'Neill, Siobhan; Corry, Colette; McFeeters, Danielle; Murphy, Sam; Bunting, Brendan

2016-01-01

The circumstances surrounding death by suicide can give us insight into the factors affecting suicide risk in particular regions. This study examined gender and circumstances surrounding death by suicide in Northern Ireland from 2005 to 2011. The study analyzed 1,671 suicides (77% male and 23% female cases) using information contained from the coroner's files on suicides and undetermined deaths. Hanging was the most common method and more than one third of the deceased had prior suicide attempts. There was evidence of alcohol use in 41% of the cases. Only, 61% of cases had recorded adverse events; most had multiple and complex combinations of experiences. Relationship and interpersonal difficulties were the most common category of adverse event (40.3%). However, illness and bereavement, employment /financial crisis, and health problems were also common. One third of those who died by suicide were employed, compared with 50.3% who were not in employment. Just over half (50.1%) were known to have a mental health disorder. The results provide the first profile of deaths by suicide in Northern Ireland. They highlight the need to target people who have difficult life experiences in suicide prevention work, notably men, people with employment, financial and relationship crises, and those with mental disorders.

Peer-Assisted Learning in Research Methods and Statistics

ERIC Educational Resources Information Center

Stone, Anna; Meade, Claire; Watling, Rosamond

2012-01-01

Feedback from students on a Level 1 Research Methods and Statistics module, studied as a core part of a BSc Psychology programme, highlighted demand for additional tutorials to help them to understand basic concepts. Students in their final year of study commonly request work experience to enhance their employability. All students on the Level 1…

A Model for Minimizing Numeric Function Generator Complexity and Delay

DTIC Science & Technology

2007-12-01

allow computation of difficult mathematical functions in less time and with less hardware than commonly employed methods. They compute piecewise...Programmable Gate Arrays (FPGAs). The algorithms and estimation techniques apply to various NFG architectures and mathematical functions. This...thesis compares hardware utilization and propagation delay for various NFG architectures, mathematical functions, word widths, and segmentation methods

Effects of child long-term illness on maternal employment: longitudinal findings from the UK Millennium Cohort Study

PubMed Central

Pearce, Anna; Whitehead, Margaret; Law, Catherine

2017-01-01

Background: Maternal employment has increased in European countries, but levels of employment are lower among mothers whose children have a limiting long-term illness or disability. However, we do not know whether having a child with a limiting illness prevents take-up or maintenance of paid employment or whether ‘common causes’, such as lack of qualifications or maternal disability lead to both maternal unemployment and childhood illness. Longitudinal data have the potential to distinguish between these. Methods: We analyzed four waves (3, 5, 7 and 11 years) of the Millennium Cohort Study (MCS) to examine the relationship between childhood limiting illness and maternal employment, unadjusted and adjusted for covariates. Multinomial regression models were used to test the association between child illness and trajectories of maternal employment. Fixed effects models assessed whether a new report of a child illness increased the odds of a mother exiting employment. Results: At every wave, maternal employment was more likely if the child did not have a limiting illness. After adjustment for covariates, childhood illness was associated with risks of continuous non-employment (adjusted Relative Risk Ratio = 1.46 [Confidence Interval: 1.21, 1.76]) or disrupted employment (aRRR = 1.26 [CI: 1.06, 1.49]), compared with entering or maintaining employment. If a child developed a limiting long-term illness, the likelihood of their mother exiting employment increased (adjusted Odds Ratio = 1.27 [CI: 1.05, 1.54]). Conclusions: ‘Common causes’ did not fully account for the association between child illness and maternal employment. Having a child with a limiting illness potentially reduces maternal employment opportunities. PMID:28177497

A survey of analytical methods employed for monitoring of Advanced Oxidation/Reduction Processes for decomposition of selected perfluorinated environmental pollutants.

PubMed

Trojanowicz, Marek; Bobrowski, Krzysztof; Szostek, Bogdan; Bojanowska-Czajka, Anna; Szreder, Tomasz; Bartoszewicz, Iwona; Kulisa, Krzysztof

2018-01-15

The monitoring of Advanced Oxidation/Reduction Processes (AO/RPs) for the evaluation of the yield and mechanisms of decomposition of perfluorinated compounds (PFCs) is often a more difficult task than their determination in the environmental, biological or food samples with complex matrices. This is mostly due to the formation of hundreds, or even thousands, of both intermediate and final products. The considered AO/RPs, involving free radical reactions, include photolytic and photocatalytic processes, Fenton reactions, sonolysis, ozonation, application of ionizing radiation and several wet oxidation processes. The main attention is paid to the most commonly occurring PFCs in the environment, namely PFOA and PFOS. The most powerful and widely exploited method for this purpose is without a doubt LC/MS/MS, which allows the identification and trace quantitation of all species with detectability and resolution power depending on the particular instrumental configurations. The GC/MS is often employed for the monitoring of volatile fluorocarbons, confirming the formation of radicals in the processes of C‒C and C‒S bonds cleavage. For the direct monitoring of radicals participating in the reactions of PFCs decomposition, the molecular spectrophotometry is employed, especially electron paramagnetic resonance (EPR). The UV/Vis spectrophotometry as a detection method is of special importance in the evaluation of kinetics of radical reactions with the use of pulse radiolysis methods. The most commonly employed for the determination of the yield of mineralization of PFCs is ion-chromatography, but there is also potentiometry with ion-selective electrode and the measurements of general parameters such as Total Organic Carbon and Total Organic Fluoride. The presented review is based on about 100 original papers published in both analytical and environmental journals. Copyright © 2017 Elsevier B.V. All rights reserved.

GP consultations for common mental disorders and subsequent sickness certification: register-based study of the employed population in Norway

PubMed Central

Gjesdal, Sturla; Holmaas, Tor Helge; Monstad, Karin; Hetlevik, Øystein

2016-01-01

Background. Challenges related to work are in focus when employed people with common mental disorders (CMDs) consult their GPs. Many become sickness certified and remain on sick leave over time. Objectives. To investigate the frequency of new CMD episodes among employed patients in Norwegian general practice and subsequent sickness certification. Methods. Using a national claims register, employed persons with a new episode of CMD were included. Sickness certification, sick leave over 16 days and length of absences were identified. Patient- and GP-related predictors for the different outcomes were assessed by means of logistic regression. Results. During 1 year 2.6% of employed men and 4.2% of employed women consulted their GP with a new episode of CMD. Forty-five percent were sickness certified, and 24 percent were absent over 16 days. Thirty-eight percent had depression and 19% acute stress reaction, which carried the highest risk for initial sickness certification, 75%, though not for prolonged absence. Men and older patients had lower risk for sickness certification, but higher risk for long-term absence. Conclusion. Better knowledge of factors at the workplace detrimental to mental health, and better treatment for depression and stress reactions might contribute to timely return of sickness absentees. PMID:27535329

Free Mesh Method: fundamental conception, algorithms and accuracy study

PubMed Central

YAGAWA, Genki

2011-01-01

The finite element method (FEM) has been commonly employed in a variety of fields as a computer simulation method to solve such problems as solid, fluid, electro-magnetic phenomena and so on. However, creation of a quality mesh for the problem domain is a prerequisite when using FEM, which becomes a major part of the cost of a simulation. It is natural that the concept of meshless method has evolved. The free mesh method (FMM) is among the typical meshless methods intended for particle-like finite element analysis of problems that are difficult to handle using global mesh generation, especially on parallel processors. FMM is an efficient node-based finite element method that employs a local mesh generation technique and a node-by-node algorithm for the finite element calculations. In this paper, FMM and its variation are reviewed focusing on their fundamental conception, algorithms and accuracy. PMID:21558752

DON'T BE TRICKED BY YOUR INTEGRATED RATE PLOT!

EPA Science Inventory

Reaction order can be determined from kinetic data in a variety of ways. Two methods commonly employed are comparison of initial rates (while varying reactant concentration) and plotting integrated rate expressions. Both of these are introduced in general and physical chemistry t...

First- and Second-Order Reactivity to Verbal Protocols: An Example from a Study on Strategy Variability

ERIC Educational Resources Information Center

Jay, Tim

2012-01-01

Verbal reports are a common method of data collection in studies of mathematics learning, often in studies with a longitudinal component or those employing microgenetic methods where several observations of problem-solving are made over a short period of time. Whilst there is a fairly substantial literature on reactivity to verbal reports,…

Understanding Drivers of Employment Changes in a Multiple Sclerosis Population

PubMed Central

Boscoe, Audra N.; Currie, Brooke M.; Landrian, Amanda S.; Wandstrat, Todd L.

2015-01-01

Background: Qualitative data are lacking on decision making and factors surrounding changes in employment for patients with multiple sclerosis (MS). This study aimed to increase our understanding of the key symptoms and factors leading patients with MS to leave work or reduce employment. Methods: Adults with MS who reported leaving the workforce, reducing work hours, or changing jobs due to MS in the past 6 months were recruited from four US clinical sites. Patients participated in semistructured interviews to discuss MS symptoms and reasons for changing employment status. All interviews were transcribed and coded for descriptive analyses. Results: Twenty-seven adults (mean age = 46.3 years, mean duration of MS diagnosis = 10.9 years) with a range of occupations participated; most were white (81.5%) and female (70.4%). Physical symptoms (eg, fatigue, visual deficits) (77.8%) were the most common reasons for employment change; 40.7% of patients reported at least one cognitive symptom (eg, memory loss). Fatigue emerged as the most pervasive symptom and affected physical and mental aspects of patients' jobs. Most patients (85.2%) reported at least two symptoms as drivers for change. Some patients reported a significant negative impact of loss of employment on their mental status, family life, and financial stability. Conclusions: Fatigue was the most common symptom associated with the decision to leave work or reduce employment and can lead to a worsening of other MS symptoms. Comprehensive symptom management, especially fatigue management, may help patients preserve their employment status. PMID:26472946

TECHNIQUES FOR THE FABRICATION OF GEOMEMBRANE FILLED SEAMS

EPA Science Inventory

Geomembranes employed to overlay the excavation for landfills must be seamed together on-site at the landfill. To ensure the integrity of the containment system of the landfill, these sheets or blankets must be carefully seamed. Present methods in common use are: extrusion fil...

Measurement equivalence: a glossary for comparative population health research.

PubMed

Morris, Katherine Ann

2018-03-06

Comparative population health studies are becoming more common and are advancing solutions to crucial public health problems, but decades-old measurement equivalence issues remain without a common vocabulary to identify and address the biases that contribute to non-equivalence. This glossary defines sources of measurement non-equivalence. While drawing examples from both within-country and between-country studies, this glossary also defines methods of harmonisation and elucidates the unique opportunities in addition to the unique challenges of particular harmonisation methods. Its primary objective is to enable population health researchers to more clearly articulate their measurement assumptions and the implications of their findings for policy. It is also intended to provide scholars and policymakers across multiple areas of inquiry with tools to evaluate comparative research and thus contribute to urgent debates on how to ameliorate growing health disparities within and between countries. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Are There Long-Run Effects of the Minimum Wage?

PubMed Central

Sorkin, Isaac

2014-01-01

An empirical consensus suggests that there are small employment effects of minimum wage increases. This paper argues that these are short-run elasticities. Long-run elasticities, which may differ from short-run elasticities, are policy relevant. This paper develops a dynamic industry equilibrium model of labor demand. The model makes two points. First, long-run regressions have been misinterpreted because even if the short- and long-run employment elasticities differ, standard methods would not detect a difference using US variation. Second, the model offers a reconciliation of the small estimated short-run employment effects with the commonly found pass-through of minimum wage increases to product prices. PMID:25937790

Are There Long-Run Effects of the Minimum Wage?

PubMed

Sorkin, Isaac

2015-04-01

An empirical consensus suggests that there are small employment effects of minimum wage increases. This paper argues that these are short-run elasticities. Long-run elasticities, which may differ from short-run elasticities, are policy relevant. This paper develops a dynamic industry equilibrium model of labor demand. The model makes two points. First, long-run regressions have been misinterpreted because even if the short- and long-run employment elasticities differ, standard methods would not detect a difference using US variation. Second, the model offers a reconciliation of the small estimated short-run employment effects with the commonly found pass-through of minimum wage increases to product prices.

20 CFR 404.1007 - Common-law employee.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Common-law employee. 404.1007 Section 404.1007 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Employment § 404.1007...

20 CFR 404.1007 - Common-law employee.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Common-law employee. 404.1007 Section 404.1007 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Employment § 404.1007...

20 CFR 404.1007 - Common-law employee.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false Common-law employee. 404.1007 Section 404.1007 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Employment § 404.1007...

Evaluating Bang for the Buck: A Cost-Effectiveness Comparison Between Individual Interviews and Focus Groups Based on Thematic Saturation Levels

ERIC Educational Resources Information Center

Namey, Emily; Guest, Greg; McKenna, Kevin; Chen, Mario

2016-01-01

Evaluators often use qualitative research methods, yet there is little evidence on the comparative cost-effectiveness of the two most commonly employed qualitative methods--in-depth interviews (IDIs) and focus groups (FGs). We performed an inductive thematic analysis of data from 40 IDIs and 40 FGs on the health-seeking behaviors of African…

INSPECTION TECHNIQUES FOR THE FABRICATION OF GEOMEMBRANE FIELD SEAMS

EPA Science Inventory

Geomembranes employed to overlay the excavation for landfills must be seamed together at the site of the landfill. o ensure the integrity of the containment system of the landfill, these sheets or blankets must be carefully seamed. he methods in present, common use are extrusion ...

Convergence studies in meshfree peridynamic simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seleson, Pablo; Littlewood, David J.

2016-04-15

Meshfree methods are commonly applied to discretize peridynamic models, particularly in numerical simulations of engineering problems. Such methods discretize peridynamic bodies using a set of nodes with characteristic volume, leading to particle-based descriptions of systems. In this article, we perform convergence studies of static peridynamic problems. We show that commonly used meshfree methods in peridynamics suffer from accuracy and convergence issues, due to a rough approximation of the contribution to the internal force density of nodes near the boundary of the neighborhood of a given node. We propose two methods to improve meshfree peridynamic simulations. The first method uses accuratemore » computations of volumes of intersections between neighbor cells and the neighborhood of a given node, referred to as partial volumes. The second method employs smooth influence functions with a finite support within peridynamic kernels. Numerical results demonstrate great improvements in accuracy and convergence of peridynamic numerical solutions, when using the proposed methods.« less

Ferromagnetic linewidth measurements employing electrodynamic model of the magnetic plasmon resonance

NASA Astrophysics Data System (ADS)

Krupka, Jerzy; Aleshkevych, Pavlo; Salski, Bartlomiej; Kopyt, Pawel

2018-02-01

The mode of uniform precession, or Kittel mode, in a magnetized ferromagnetic sphere, has recently been proven to be the magnetic plasmon resonance. In this paper we show how to apply the electrodynamic model of the magnetic plasmon resonance for accurate measurements of the ferromagnetic resonance linewidth ΔH. Two measurement methods are presented. The first one employs Q-factor measurements of the magnetic plasmon resonance coupled to the resonance of an empty metallic cavity. Such coupled modes are known as magnon-polariton modes, i.e. hybridized modes between the collective spin excitation and the cavity excitation. The second one employs direct Q-factor measurements of the magnetic plasmon resonance in a filter setup with two orthogonal semi-loops used for coupling. Q-factor measurements are performed employing a vector network analyser. The methods presented in this paper allow one to extend the measurement range of the ferromagnetic resonance linewidth ΔH well beyond the limits of the commonly used measurement standards in terms of the size of the samples and the lowest measurable linewidths. Samples that can be measured with the newly proposed methods may have larger size as compared to the size of samples that were used in the standard methods restricted by the limits of perturbation theory.

Preferred Materials and Methods Employed for Endodontic Treatment by Iranian General Practitioners

PubMed Central

Raoof, Maryam; Zeini, Negar; Haghani, Jahangir; Sadr, Saeedeh; Mohammadalizadeh, Sakineh

2015-01-01

Introduction: The aim of this study was to gather information on the materials and methods employed in root canal treatment (RCT) by general dental practitioners (GDPs) in Iran. Methods and Materials: A questionnaire was distributed among 450 dentists who attended the 53th Iranian Dental Association congress. Participants were asked to consider demographic variables and answer the questions regarding the materials and methods commonly used in RCT. Descriptive statistics were given as absolute frequencies and valid percentages. The chi-square test was used to investigate the influence of gender and the years of professional activity for the employed materials and techniques. Results: The response rate was 84.88%. The results showed that 61.5% of the participants did not perform pulp sensitivity tests prior to RCT. Less than half of the general dental practitioners (47.4%) said that they would trace a sinus tract before starting the treatment. Nearly 16% of practitioners preferred the rubber dam isolation method. Over 36% of the practitioners reported using formocresol for pulpotomy. The combined approach of working length (WL) radiographs and electronic apex locators was used by 35.2% of the practitioners. Most of the respondents used K-file hand instruments for canal preparation and the technique of choice was step-back (43.5%), while 40.1% of respondents used NiTi rotary files, mostly ProTaper and RaCe. The most widely used irrigant was normal saline (61.8%). Calcium hydroxide was the most commonly used inter appointment medicament (84.6%). The most popular obturation technique was cold lateral condensation (81.7%) with 51% using zinc oxide-eugenol-based sealers. Conclusions: The majority of Iranian GDPs who participated in the present survey do not comply with quality guidelines of endodontic treatment. PMID:25834595

Long-Term Effects of Mental disorders on Employment In the National Comorbidity Survey Ten-Year Follow-up

PubMed Central

Mojtabai, Ramin; Stuart, Elizabeth A.; Hwang, Irving; Susukida, Ryoko; Eaton, William W.; Sampson, Nancy; Kessler, Ronald C.

2015-01-01

Purpose Although significant negative associations of mental disorders with employment have been documented in epidemiological research, much of this research was based on cross-sectional samples and focused only on severe and persistent mental disorders. The present study examined the longitudinal associations of more common mental disorders with employment. Methods Data on the associations of common mental disorders with employment are presented here from 4,501 respondents in the National Comorbidity Survey panel study, a two-wave community epidemiological survey of respondents aged 15-54 at baseline (1990-1992) who were re-interviewed in 2001-2003 and were employed, unemployed in the labor force or student at baseline. Lifetime mental disorders at baseline and disorders with onset after baseline were assessed with the Composite International Diagnostic Interview, a fully-structured interview that assessed lifetime prevalence of internalizing fear disorders (panic, phobias), anxiety/misery disorders (major depression, generalized anxiety disorder, post-traumatic stress disorder), externalizing disorders (conduct disorder, alcohol and illicit drug abuse-dependence), and bipolar disorder. Results Both baseline lifetime disorders and disorders with onsets after baseline were associated with significantly reduced odds of subsequent employment among respondents who were either employed or students at baseline. Population projections based on the assumption that these associations represented causal effects suggest that the mental disorders considered here were associated with 1.7-3.2 million adults being unemployed in the US population at follow-up. Conclusions Expanded access to treatment among current employees and students with mental disorders might lead to improved employment outcomes in these segments of the population. PMID:26211661

Oral Histories as Critical Qualitative Inquiry in Community Health Assessment

ERIC Educational Resources Information Center

Hernandez, Sarah Gabriella; Genkova, Ana; Castañeda, Yvette; Alexander, Simone; Hebert-Beirne, Jennifer

2017-01-01

Qualitative methods such as focus groups and interviews are common methodologies employed in participatory approaches to community health assessment to develop effective community health improvement plans. Oral histories are a rarely used form of qualitative inquiry that can enhance community health assessment in multiple ways. Oral histories…

Direct Microscopy: A Useful Tool to Diagnose Oral Candidiasis in Children and Adolescents.

PubMed

Marty, Mathieu; Bourrat, Emmanuelle; Vaysse, Frédéric; Bonner, Mark; Bailleul-Forestier, Isabelle

2015-12-01

Oral candidiasis is one of the most common opportunistic fungal infections of the oral cavity in human. Among children, this condition represents one of the most frequent affecting the mucosa. Although most diagnoses are made based on clinical signs and features, a microbiological analysis is sometimes necessary. We performed a literature review on the diagnosis of oral candidiasis to identify the techniques most commonly employed in routine clinical practice. A Medline-PubMed search covering the last 10 years was performed. Microbiological techniques were used in cases requiring confirmation of the clinical diagnosis. In such cases, direct microscopy was the method most commonly used for diagnosing candidiasis. Direct microscopy appears as the method of choice for confirming clinical diagnosis and could become a routine chair-side technique.

Comparison of Employer Productivity Metrics to Lost Productivity Estimated by Commonly Used Questionnaires.

PubMed

Gardner, Bethany T; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C; Evanoff, Bradley

2016-02-01

The aim of the study was to assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Fifty-eight billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss.

The generalized scattering coefficient method for plane wave scattering in layered structures

NASA Astrophysics Data System (ADS)

Liu, Yu; Li, Chao; Wang, Huai-Yu; Zhou, Yun-Song

2017-02-01

The generalized scattering coefficient (GSC) method is pedagogically derived and employed to study the scattering of plane waves in homogeneous and inhomogeneous layered structures. The numerical stabilities and accuracies of this method and other commonly used numerical methods are discussed and compared. For homogeneous layered structures, concise scattering formulas with clear physical interpretations and strong numerical stability are obtained by introducing the GSCs. For inhomogeneous layered structures, three numerical methods are employed: the staircase approximation method, the power series expansion method, and the differential equation based on the GSCs. We investigate the accuracies and convergence behaviors of these methods by comparing their predictions to the exact results. The conclusions are as follows. The staircase approximation method has a slow convergence in spite of its simple and intuitive implementation, and a fine stratification within the inhomogeneous layer is required for obtaining accurate results. The expansion method results are sensitive to the expansion order, and the treatment becomes very complicated for relatively complex configurations, which restricts its applicability. By contrast, the GSC-based differential equation possesses a simple implementation while providing fast and accurate results.

21 CFR 801.62 - Declaration of net quantity of contents.

Code of Federal Regulations, 2011 CFR

2011-04-01

... paragraph (p) of this section. (c) The declaration may contain common or decimal fractions. A common... there exists a firmly established, general consumer usage and trade custom of employing different common fractions in the net quantity declaration of a particular commodity, they may be employed. A common fraction...

21 CFR 201.62 - Declaration of net quantity of contents.

Code of Federal Regulations, 2011 CFR

2011-04-01

... this section. (c) The declaration may contain common or decimal fractions. A common fraction shall be... firmly established, general consumer usage and trade custom of employing different common fractions in the net quantity declaration of a particular commodity, they may be employed. A common fraction shall...

21 CFR 201.62 - Declaration of net quantity of contents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... this section. (c) The declaration may contain common or decimal fractions. A common fraction shall be... firmly established, general consumer usage and trade custom of employing different common fractions in the net quantity declaration of a particular commodity, they may be employed. A common fraction shall...

21 CFR 701.13 - Declaration of net quantity of contents.

Code of Federal Regulations, 2011 CFR

2011-04-01

... will give such information. (d) The declaration may contain common or decimal fractions. A common... there exists a firmly established, general consumer usage and trade custom of employing different common fractions in the net quantity declaration of a particular commodity they may be employed. A common fraction...

Agricultural employers' hiring and safety practices for adolescent workers.

PubMed

Lee, B C; Westaby, J D; Chyou, P H; Purschwitz, M A

2007-01-01

The goal of the "Safety Training for Employers and Supervisors of Adolescent Farmworkers" initiative is to improve the occupational health and safety knowledge and practices of agricultural employers and supervisors responsible for employees, ages 14 to 17 years. Surveys were sent to members of the National Council of Agricultural Employers and the Washington Growers League to measure attitudes regarding adolescent employees, current hiring and training practices, and future intentions. More than half of the respondents hire adolescents. Two-thirds were male, nearly three-quarters of the respondents had college or post-graduate degrees, and more than half were 50 years or older. The majority of respondents had positive perceptions of adolescents in terms of dependability, helpfulness, and work ethic. Among those who currently hire young workers, the most common reasons were to provide a job for children of friends and family and because they can work part-time to fill a labor demand. Among those not hiring adolescents, the most common reason was concern about child labor regulations and associated tasks (e.g., paperwork, monitoring hours). Respondents use a variety of safety training resources, especially posters and safety meetings. For the future, they expect to need more handout materials and training videos. Study results provide insights into barriers to the employment of young workers and suggest methods by which agricultural safety specialists can best assist those employers and producers who are willing to hire adolescents into agricultural work settings.

Superiorization with level control

NASA Astrophysics Data System (ADS)

Cegielski, Andrzej; Al-Musallam, Fadhel

2017-04-01

The convex feasibility problem is to find a common point of a finite family of closed convex subsets. In many applications one requires something more, namely finding a common point of closed convex subsets which minimizes a continuous convex function. The latter requirement leads to an application of the superiorization methodology which is actually settled between methods for convex feasibility problem and the convex constrained minimization. Inspired by the superiorization idea we introduce a method which sequentially applies a long-step algorithm for a sequence of convex feasibility problems; the method employs quasi-nonexpansive operators as well as subgradient projections with level control and does not require evaluation of the metric projection. We replace a perturbation of the iterations (applied in the superiorization methodology) by a perturbation of the current level in minimizing the objective function. We consider the method in the Euclidean space in order to guarantee the strong convergence, although the method is well defined in a Hilbert space.

Homotopy method for optimization of variable-specific-impulse low-thrust trajectories

NASA Astrophysics Data System (ADS)

Chi, Zhemin; Yang, Hongwei; Chen, Shiyu; Li, Junfeng

2017-11-01

The homotopy method has been used as a useful tool in solving fuel-optimal trajectories with constant-specific-impulse low thrust. However, the specific impulse is often variable for many practical solar electric power-limited thrusters. This paper investigates the application of the homotopy method for optimization of variable-specific-impulse low-thrust trajectories. Difficulties arise when the two commonly-used homotopy functions are employed for trajectory optimization. The optimal power throttle level and the optimal specific impulse are coupled with the commonly-used quadratic and logarithmic homotopy functions. To overcome these difficulties, a modified logarithmic homotopy function is proposed to serve as a gateway for trajectory optimization, leading to decoupled expressions of both the optimal power throttle level and the optimal specific impulse. The homotopy method based on this homotopy function is proposed. Numerical simulations validate the feasibility and high efficiency of the proposed method.

Educational Technology Research Journals: "The Internet and Higher Education", 2001-2010

ERIC Educational Resources Information Center

Drysdale, Jeffery S.; Matthews, Michael; Terekhova-Nan, Vera; Woodfield, Wendy; West, Richard E.

2013-01-01

This article analyzes articles published in "The Internet and Higher Education" from 2001-2010. The researchers analyzed the frequency of author-provided keywords and common abstract words, type and frequency of authorship, the type of research method employed, and the number of citations the journal and specific articles received. Words…

STATISTICAL ESTIMATES OF VARIANCE FOR 15N ISOTOPE DILUTION MEASUREMENTS OF GROSS RATES OF NITROGEN CYCLE PROCESSES

EPA Science Inventory

It has been fifty years since Kirkham and Bartholmew (1954) presented the conceptual framework and derived the mathematical equations that formed the basis of the now commonly employed method of 15N isotope dilution. Although many advances in methodology and analysis have been ma...

Investigating Cognitive Effort and Response Quality of Question Formats in Web Surveys Using Paradata

ERIC Educational Resources Information Center

Höhne, Jan Karem; Schlosser, Stephan; Krebs, Dagmar

2017-01-01

Measuring attitudes and opinions employing agree/disagree (A/D) questions is a common method in social research because it appears to be possible to measure different constructs with identical response scales. However, theoretical considerations suggest that A/D questions require a considerable cognitive processing. Item-specific (IS) questions,…

Stability of Amphotericin B in Fungal Culture Media

PubMed Central

Cheung, S. C.; Medoff, G.; Schlessinger, D.; Kobayashi, G. S.

1975-01-01

We have found that amphotericin B is unstable in two commonly employed fungal culture media. This instability leads to inaccuracies in determining the actual level of susceptibility of slow-growing strains that require prolonged incubation for growth. To help compensate for this problem, we have described two rapid methods of susceptibility testing. PMID:1103723

Aggression and Tantrums in Children with Autism: A Review of Behavioral Treatments and Maintaining Variables

ERIC Educational Resources Information Center

Matson, Johnny

2009-01-01

Aggression and tantrums are common co-occurring problems with autism. Fortunately, positive developments in the treatment of these challenging and stigmatizing behaviors have been made recently with psychologically-based interventions. Evidence-based methods employ behavior modification, which is also often described as applied behavior analysis…

Gatekeeper Training in Campus Suicide Prevention

ERIC Educational Resources Information Center

Wallack, Cory; Servaty-Seib, Heather L.; Taub, Deborah J.

2013-01-01

Gatekeeper training is one of the most commonly employed methods for identifying and intervening with at-risk students (Davidson and Locke, 2010). Within the context of campus suicide prevention, a gatekeeper is broadly defined as any individual who has the potential to come into contact with at-risk students (Davidson and Locke, 2010). Although…

Comparing Inference Approaches for RD Designs: A Reexamination of the Effect of Head Start on Child Mortality

ERIC Educational Resources Information Center

Cattaneo, Matias D.; Titiunik, Rocío; Vazquez-Bare, Gonzalo

2017-01-01

The regression discontinuity (RD) design is a popular quasi-experimental design for causal inference and policy evaluation. The most common inference approaches in RD designs employ "flexible" parametric and nonparametric local polynomial methods, which rely on extrapolation and large-sample approximations of conditional expectations…

Contradictions and Tensions in Students' Motives of Enrolling in a Teacher Education Programme in Zimbabwe

ERIC Educational Resources Information Center

Mudavanhu, Young

2015-01-01

This study explored identities commonly used in teacher education and student teachers' motives for becoming a teacher. The qualitative case methodology employed interviews and biographical questionnaires data collection methods. Data was gathered through interviewing student teachers and lecturers. Qualitative data analysis began by defining a…

Educational Technology Research Journals: "Journal of Distance Education," 2003-2012

ERIC Educational Resources Information Center

Young, Eric H.; Griffiths, Ty; Luke, Brandon; West, Richard E.

2014-01-01

In this study the authors analyzed articles published in the "Journal of Distance Education" from 2003-2012. They analyzed the frequency of author-provided keywords and common abstract phrases, type and frequency of authorship, the type of research method employed, and the number of citations the journal and specific articles received.…

Critical assessment of jet erosion test methodologies for cohesive soil and sediment

USDA-ARS?s Scientific Manuscript database

The submerged Jet Erosion Test (JET) is a commonly used technique to assess the erodibility of cohesive soil. Employing a linear excess shear stress equation and impinging jet theory, simple numerical methods have been developed to analyze data collected using a JET to determine the critical shear s...

A practical modification of horizontal line sampling for snag and cavity tree inventory

Treesearch

M. J. Ducey; G. J. Jordan; J. H. Gove; H. T. Valentine

2002-01-01

Snags and cavity trees are important structural features in forests, but they are often sparsely distributed, making efficient inventories problematic. We present a straightforward modification of horizontal line sampling designed to facilitate inventory of these features while remaining compatible with commonly employed sampling methods for the living overstory. The...

Evaluation of three aging techniques and back-calculated growth for introduced Blue Catfish from Lake Oconee, Georgia

USGS Publications Warehouse

Homer, Michael D.; Peterson, James T.; Jennings, Cecil A.

2015-01-01

Back-calculation of length-at-age from otoliths and spines is a common technique employed in fisheries biology, but few studies have compared the precision of data collected with this method for catfish populations. We compared precision of back-calculated lengths-at-age for an introducedIctalurus furcatus (Blue Catfish) population among 3 commonly used cross-sectioning techniques. We used gillnets to collect Blue Catfish (n = 153) from Lake Oconee, GA. We estimated ages from a basal recess, articulating process, and otolith cross-section from each fish. We employed the Frasier-Lee method to back-calculate length-at-age for each fish, and compared the precision of back-calculated lengths among techniques using hierarchical linear models. Precision in age assignments was highest for otoliths (83.5%) and lowest for basal recesses (71.4%). Back-calculated lengths were variable among fish ages 1–3 for the techniques compared; otoliths and basal recesses yielded variable lengths at age 8. We concluded that otoliths and articulating processes are adequate for age estimation of Blue Catfish.

Efficiency optimization of class-D biomedical inductive wireless power transfer systems by means of frequency adjustment.

PubMed

Schormans, Matthew; Valente, Virgilio; Demosthenous, Andreas

2015-01-01

Inductive powering for implanted medical devices is a commonly employed technique, that allows for implants to avoid more dangerous methods such as the use of transcutaneous wires or implanted batteries. However, wireless powering in this way also comes with a number of difficulties and conflicting requirements, which are often met by using designs based on compromise. In particular, one aspect common to most inductive power links is that they are driven with a fixed frequency, which may not be optimal depending on factors such as coupling and load. In this paper, a method is proposed in which an inductive power link is driven by a frequency that is maintained at an optimum value f(opt), to ensure that the link is in resonance. In order to maintain this resonance, a phase tracking technique is employed at the primary side of the link; this allows for compensation of changes in coil separation and load. The technique is shown to provide significant improvements in maintained secondary voltage and efficiency for a range of loads when the link is overcoupled.

The effectiveness of cartographic visualisations in landscape archaeology

NASA Astrophysics Data System (ADS)

Fairbairn, David

2018-05-01

The use of maps and other geovisualisation methods has been longstanding in archaeology. Archaeologists employ advanced contemporary tools in their data collection, analysis and presentation. Maps can be used to render the `big data' commonly collected by archaeological prospection techniques, but are also fundamental output instru-ments for the dissemination of archaeological interpretation and modelling. This paper addresses, through case studies, alternate methods of geovisualisation in archaeology and identifies the efficiencies of each.

Precarious employment and occupational accidents and injuries - a systematic review.

PubMed

Koranyi, Isa; Jonsson, Johanna; Rönnblad, Torkel; Stockfelt, Leo; Bodin, Theo

2018-02-14

bjectives Precarious employment conditions have become more common in many countries over the last decades, and have been linked to various adverse health outcomes. The objective of this review was to collect and summarize existing scientific research of the relationship between dimensions of precarious employment and the rate of occupational injuries. Methods A protocol was developed in accordance with the PRISMA-P checklist for systematic literature reviews. We searched PubMed, Web of Science and Scopus for articles on observational studies from North America, Europe, Australia and New Zealand published in peer-reviewed journals 1990-2017. A minimum of two independent reviewers assessed each article with respect to quality and eligibility criteria. Articles of high/moderate quality meeting all specified inclusion criteria were included in the review. Results The literature search resulted in 471 original titles, of which 17 articles met all the inclusion criteria. The most common exposures were in descending order; temporary employment, multiple jobs, working for a subcontractor at the same worksite/temp agency, part-time, self-employment, hourly pay, union membership, insurance benefits, flexible versus fixed work schedule, wages, job insecurity, work-time control and precarious career trajectories. Ten studies reported a positive association between precarious employment and occupational injuries. Four studies reported a negative association, and three studies did not show any significant association. Conclusions This review supports an association between some of the dimensions of precarious employment and occupational injuries; most notably for multiple jobholders and employees of temp agencies or subcontractors at the same worksite. However, results for temporary employment are inconclusive. There is a need for more prospective studies of high quality, designed to measure effect sizes as well as causality.

Effects of gravity on contractile proteins

NASA Technical Reports Server (NTRS)

Henney, H. R., Jr.

1979-01-01

A method was established for the isolation and purification of nuclei in high yield from the microplasmodia of Physarum flavicomum. Purified nuclei were resistant to breakage by methods commonly employed for isolated plant and animal nuclei. Several methods for the extraction of nuclear protein were compared. Incubation of nuclear lysates with either 2 M NaCl, with or without 5 M urea, or 1 M CaCl2 resulted in the extraction of nuclear action together with histones. The histones were chemically fractionated into the 5 basic groups common to other eucaryotic tissue. Amino acid analyses of the total histone were also performed. Nuclear actin was found to have a molecular weight of 41,000 ? 4,000 daltons as determined by SDS polyacrylamide gel electrophoresis. The amino acid composition of the nuclear action was established.

Space Telecommunications Radio System (STRS) Architecture Standard. Release 1.02.1

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.; Kacpura, Thomas J.; Handler, Louis M.; Hall, C. Steve; Mortensen, Dale J.; Johnson, Sandra K.; Briones, Janette C.; Nappier, Jennifer M.; Downey, Joseph A.; Lux, James P.

2012-01-01

This document contains the NASA architecture standard for software defined radios used in space- and ground-based platforms to enable commonality among radio developments to enhance capability and services while reducing mission and programmatic risk. Transceivers (or transponders) with functionality primarily defined in software (e.g., firmware) have the ability to change their functional behavior through software alone. This radio architecture standard offers value by employing common waveform software interfaces, method of instantiation, operation, and testing among different compliant hardware and software products. These common interfaces within the architecture abstract application software from the underlying hardware to enable technology insertion independently at either the software or hardware layer.

A novel percussion type droplet-on-demand generator

NASA Astrophysics Data System (ADS)

Hussain, Taaha; Patel, Priyesh; Balachandran, Ramanarayanan; Ladommatos, Nicos

2015-01-01

Numerous engineering applications require generation of droplets on demand which are of high uniformity and constant size. The common method to produce droplets is to drive liquid at high pressure through a small orifice/nozzle. The liquid stream disintegrates into small droplets. However this method normally requires large volumes of liquid and is not suitable for applications where single droplets of constant size is required. Such applications require droplet-on-demand generators which commonly employ piezoelectric or pneumatic actuation. It is well known that piezoelectric generators are hard to employ at high pressure and, high temperature applications, and the pneumatic generators often produce satellite (secondary) droplets. This paper describes the development of a novel percussion type droplet-on-demand generator, which overcomes some of the above difficulties and is capable of producing single droplets on demand. The generator consists of a cylindrical liquid filled chamber with a small orifice at the bottom. The top of the chamber is covered with a thin flexible metal disc. A small metal pin is employed to hammer/impact the top metal surface to generate a pressure pulse inside the liquid chamber. The movement and the momentum of the metal pin are controlled using a solenoid device. The pressure pulse generated overcomes the surface tension of the liquid meniscus at the exit of the orifice and ejects a single droplet. The work presented in this paper will demonstrate the capabilities of the droplet generator.

Inventory on the dietary assessment tools available and needed in africa: a prerequisite for setting up a common methodological research infrastructure for nutritional surveillance, research, and prevention of diet-related non-communicable diseases.

PubMed

Pisa, Pedro T; Landais, Edwige; Margetts, Barrie; Vorster, Hester H; Friedenreich, Christine M; Huybrechts, Inge; Martin-Prevel, Yves; Branca, Francesco; Lee, Warren T K; Leclercq, Catherine; Jerling, Johann; Zotor, Francis; Amuna, Paul; Al Jawaldeh, Ayoub; Aderibigbe, Olaide Ruth; Amoussa, Waliou Hounkpatin; Anderson, Cheryl A M; Aounallah-Skhiri, Hajer; Atek, Madjid; Benhura, Chakare; Chifamba, Jephat; Covic, Namukolo; Dary, Omar; Delisle, Hélène; El Ati, Jalila; El Hamdouchi, Asmaa; El Rhazi, Karima; Faber, Mieke; Kalimbira, Alexander; Korkalo, Liisa; Kruger, Annamarie; Ledo, James; Machiweni, Tatenda; Mahachi, Carol; Mathe, Nonsikelelo; Mokori, Alex; Mouquet-Rivier, Claire; Mutie, Catherine; Nashandi, Hilde Liisa; Norris, Shane A; Onabanjo, Oluseye Olusegun; Rambeloson, Zo; Saha, Foudjo Brice U; Ubaoji, Kingsley Ikechukwu; Zaghloul, Sahar; Slimani, Nadia

2018-01-02

To carry out an inventory on the availability, challenges, and needs of dietary assessment (DA) methods in Africa as a pre-requisite to provide evidence, and set directions (strategies) for implementing common dietary methods and support web-research infrastructure across countries. The inventory was performed within the framework of the "Africa's Study on Physical Activity and Dietary Assessment Methods" (AS-PADAM) project. It involves international institutional and African networks. An inventory questionnaire was developed and disseminated through the networks. Eighteen countries responded to the dietary inventory questionnaire. Various DA tools were reported in Africa; 24-Hour Dietary Recall and Food Frequency Questionnaire were the most commonly used tools. Few tools were validated and tested for reliability. Face-to-face interview was the common method of administration. No computerized software or other new (web) technologies were reported. No tools were standardized across countries. The lack of comparable DA methods across represented countries is a major obstacle to implement comprehensive and joint nutrition-related programmes for surveillance, programme evaluation, research, and prevention. There is a need to develop new or adapt existing DA methods across countries by employing related research infrastructure that has been validated and standardized in other settings, with the view to standardizing methods for wider use.

Qualitative versus quantitative methods in psychiatric research.

PubMed

Razafsha, Mahdi; Behforuzi, Hura; Azari, Hassan; Zhang, Zhiqun; Wang, Kevin K; Kobeissy, Firas H; Gold, Mark S

2012-01-01

Qualitative studies are gaining their credibility after a period of being misinterpreted as "not being quantitative." Qualitative method is a broad umbrella term for research methodologies that describe and explain individuals' experiences, behaviors, interactions, and social contexts. In-depth interview, focus groups, and participant observation are among the qualitative methods of inquiry commonly used in psychiatry. Researchers measure the frequency of occurring events using quantitative methods; however, qualitative methods provide a broader understanding and a more thorough reasoning behind the event. Hence, it is considered to be of special importance in psychiatry. Besides hypothesis generation in earlier phases of the research, qualitative methods can be employed in questionnaire design, diagnostic criteria establishment, feasibility studies, as well as studies of attitude and beliefs. Animal models are another area that qualitative methods can be employed, especially when naturalistic observation of animal behavior is important. However, since qualitative results can be researcher's own view, they need to be statistically confirmed, quantitative methods. The tendency to combine both qualitative and quantitative methods as complementary methods has emerged over recent years. By applying both methods of research, scientists can take advantage of interpretative characteristics of qualitative methods as well as experimental dimensions of quantitative methods.

Collinear interferometer with variable delay for carrier-envelope offset frequency measurement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pawlowska, Monika; Ozimek, Filip; Fita, Piotr

2009-08-15

We demonstrate a novel scheme for measuring the carrier-envelope offset frequency in a femtosecond optical frequency comb. Our method is based on a common-path interferometer with a calcite Babinet-Soleil compensator employed to control the delay between the two interfering beams of pulses. The large delay range (up to 8 ps) of our device is sufficient for systems that rely on spectral broadening in microstructured fibers. We show an experimental proof that the stability of a common-path arrangement is superior to that of the standard interferometers.

Collinear interferometer with variable delay for carrier-envelope offset frequency measurement

NASA Astrophysics Data System (ADS)

Pawłowska, Monika; Ozimek, Filip; Fita, Piotr; Radzewicz, Czesław

2009-08-01

We demonstrate a novel scheme for measuring the carrier-envelope offset frequency in a femtosecond optical frequency comb. Our method is based on a common-path interferometer with a calcite Babinet-Soleil compensator employed to control the delay between the two interfering beams of pulses. The large delay range (up to 8 ps) of our device is sufficient for systems that rely on spectral broadening in microstructured fibers. We show an experimental proof that the stability of a common-path arrangement is superior to that of the standard interferometers.

How to use… lymph node biopsy in paediatrics.

PubMed

Farndon, Sarah; Behjati, Sam; Jonas, Nico; Messahel, Boo

2017-10-01

Lymphadenopathy is a common finding in children. It often causes anxiety among parents and healthcare professionals because it can be a sign of cancer. There is limited high-quality evidence to guide clinicians as to which children should be referred for lymph node biopsy. The gold standard method for evaluating lymphadenopathy of unknown cause is an excision biopsy. In this Interpretation, we discuss the use of lymph node biopsy in children. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Methods for the accurate estimation of confidence intervals on protein folding ϕ-values

PubMed Central

Ruczinski, Ingo; Sosnick, Tobin R.; Plaxco, Kevin W.

2006-01-01

ϕ-Values provide an important benchmark for the comparison of experimental protein folding studies to computer simulations and theories of the folding process. Despite the growing importance of ϕ measurements, however, formulas to quantify the precision with which ϕ is measured have seen little significant discussion. Moreover, a commonly employed method for the determination of standard errors on ϕ estimates assumes that estimates of the changes in free energy of the transition and folded states are independent. Here we demonstrate that this assumption is usually incorrect and that this typically leads to the underestimation of ϕ precision. We derive an analytical expression for the precision of ϕ estimates (assuming linear chevron behavior) that explicitly takes this dependence into account. We also describe an alternative method that implicitly corrects for the effect. By simulating experimental chevron data, we show that both methods accurately estimate ϕ confidence intervals. We also explore the effects of the commonly employed techniques of calculating ϕ from kinetics estimated at non-zero denaturant concentrations and via the assumption of parallel chevron arms. We find that these approaches can produce significantly different estimates for ϕ (again, even for truly linear chevron behavior), indicating that they are not equivalent, interchangeable measures of transition state structure. Lastly, we describe a Web-based implementation of the above algorithms for general use by the protein folding community. PMID:17008714

Experimental cocrystal screening and solution based scale-up cocrystallization methods.

PubMed

Malamatari, Maria; Ross, Steven A; Douroumis, Dennis; Velaga, Sitaram P

2017-08-01

Cocrystals are crystalline single phase materials composed of two or more different molecular and/or ionic compounds generally in a stoichiometric ratio which are neither solvates nor simple salts. If one of the components is an active pharmaceutical ingredient (API), the term pharmaceutical cocrystal is often used. There is a growing interest among drug development scientists in exploring cocrystals, as means to address physicochemical, biopharmaceutical and mechanical properties and expand solid form diversity of the API. Conventionally, coformers are selected based on crystal engineering principles, and the equimolar mixtures of API and coformers are subjected to solution-based crystallization that are commonly employed in polymorph and salt screening. However, the availability of new knowledge on cocrystal phase behaviour in solid state and solutions has spurred the development and implementation of more rational experimental cocrystal screening as well as scale-up methods. This review aims to provide overview of commonly employed solid form screening techniques in drug development with an emphasis on cocrystal screening methodologies. The latest developments in understanding and the use of cocrystal phase diagrams in both screening and solution based scale-up methods are also presented. Final section is devoted to reviewing the state of the art research covering solution based scale-up cocrystallization process for different cocrystals besides more recent continuous crystallization methods. Copyright © 2017 Elsevier B.V. All rights reserved.

Efficient and Robust Optimization for Building Energy Simulation

PubMed Central

Pourarian, Shokouh; Kearsley, Anthony; Wen, Jin; Pertzborn, Amanda

2016-01-01

Efficiently, robustly and accurately solving large sets of structured, non-linear algebraic and differential equations is one of the most computationally expensive steps in the dynamic simulation of building energy systems. Here, the efficiency, robustness and accuracy of two commonly employed solution methods are compared. The comparison is conducted using the HVACSIM+ software package, a component based building system simulation tool. The HVACSIM+ software presently employs Powell’s Hybrid method to solve systems of nonlinear algebraic equations that model the dynamics of energy states and interactions within buildings. It is shown here that the Powell’s method does not always converge to a solution. Since a myriad of other numerical methods are available, the question arises as to which method is most appropriate for building energy simulation. This paper finds considerable computational benefits result from replacing the Powell’s Hybrid method solver in HVACSIM+ with a solver more appropriate for the challenges particular to numerical simulations of buildings. Evidence is provided that a variant of the Levenberg-Marquardt solver has superior accuracy and robustness compared to the Powell’s Hybrid method presently used in HVACSIM+. PMID:27325907

Efficient and Robust Optimization for Building Energy Simulation.

PubMed

Pourarian, Shokouh; Kearsley, Anthony; Wen, Jin; Pertzborn, Amanda

2016-06-15

Efficiently, robustly and accurately solving large sets of structured, non-linear algebraic and differential equations is one of the most computationally expensive steps in the dynamic simulation of building energy systems. Here, the efficiency, robustness and accuracy of two commonly employed solution methods are compared. The comparison is conducted using the HVACSIM+ software package, a component based building system simulation tool. The HVACSIM+ software presently employs Powell's Hybrid method to solve systems of nonlinear algebraic equations that model the dynamics of energy states and interactions within buildings. It is shown here that the Powell's method does not always converge to a solution. Since a myriad of other numerical methods are available, the question arises as to which method is most appropriate for building energy simulation. This paper finds considerable computational benefits result from replacing the Powell's Hybrid method solver in HVACSIM+ with a solver more appropriate for the challenges particular to numerical simulations of buildings. Evidence is provided that a variant of the Levenberg-Marquardt solver has superior accuracy and robustness compared to the Powell's Hybrid method presently used in HVACSIM+.

Validation and application of a quantitative real-time PCR assay to detect common wheat adulteration of durum wheat for pasta production.

PubMed

Carloni, Elisa; Amagliani, Giulia; Omiccioli, Enrica; Ceppetelli, Veronica; Del Mastro, Michele; Rotundo, Luca; Brandi, Giorgio; Magnani, Mauro

2017-06-01

Pasta is the Italian product par excellence and it is now popular worldwide. Pasta of a superior quality is made with pure durum wheat. In Italy, addition of Triticum aestivum (common wheat) during manufacturing is not allowed and, without adequate labeling, its presence is considered an adulteration. PCR-related techniques can be employed for the detection of common wheat contaminations. In this work, we demonstrated that a previously published method for the detection of T. aestivum, based on the gliadin gene, is inadequate. Moreover, a new molecular method, based on DNA extraction from semolina and real-time PCR determination of T. aestivum in Triticum spp., was validated. This multiplex real-time PCR, based on the dual-labeled probe strategy, guarantees target detection specificity and sensitivity in a short period of time. Moreover, the molecular analysis of common wheat contamination in commercial wheat and flours is described for the first time. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Comparison of Two Approaches to Correction of Restriction of Range in Correlation Analysis

ERIC Educational Resources Information Center

Wiberg, Marie; Sundstrom, Anna

2009-01-01

A common problem in predictive validity studies in the educational and psychological fields, e.g. in educational and employment selection, is restriction in range of the predictor variables. There are several methods for correcting correlations for restriction of range. The aim of this paper was to examine the usefulness of two approaches to…

A reliable methodology for quantitative extraction of fruit and vegetable physiological amino acids and their subsequent analysis with commonly available HPLC systems

USDA-ARS?s Scientific Manuscript database

High performance liquid chromatography of dabsyl derivatives of amino acids was employed for quantification of physiological amino acids in selected fruits and vegetables. This method was found to be particularly useful because the dabsyl derivatives of glutamine and citrulline were sufficiently se...

Reliability of the Colorado Family Support Assessment: A Self-Sufficiency Matrix for Families

ERIC Educational Resources Information Center

Richmond, Melissa K.; Pampel, Fred C.; Zarcula, Flavia; Howey, Virginia; McChesney, Brenda

2017-01-01

Purpose: Family support programs commonly use self-sufficiency matrices (SSMs) to measure family outcomes, however, validation research on SSMs is sparse. This study examined the reliability of the Colorado Family Support Assessment 2.0 (CFSA 2.0) to measure family self-reliance across 14 domains (e.g., employment). Methods: Ten written case…

Second Conference on Artificial Intelligence for Space Applications

NASA Technical Reports Server (NTRS)

Dollman, Thomas (Compiler)

1988-01-01

The proceedings of the conference are presented. This second conference on Artificial Intelligence for Space Applications brings together a diversity of scientific and engineering work and is intended to provide an opportunity for those who employ AI methods in space applications to identify common goals and to discuss issues of general interest in the AI community.

Rate My Stake: Interpretation of Ordinal Stake Ratings

Treesearch

Patricia Lebow; Grant Kirker

2014-01-01

Ordinal rating systems are commonly employed to evaluate biodeterioration of wood exposed outdoors over long periods of time. The purpose of these ratings is to compare the durability of test systems to nondurable wood products or known durable wood products. There are many reasons why these systems have evolved as the chosen method of evaluation, including having an...

Reptile and amphibian response to oak regeneration treatments in productive southern Appalachian hardwood forest

Treesearch

Cathryn H. Greenberg; Christopher E. Moorman; Amy L. Raybuck; Chad Sundol; Tara L. Keyser; Janis Bush; Dean M. Simon; Gordon S. Warburton

2016-01-01

Forest restoration efforts commonly employ silvicultural methods that alter light and competition to influence species composition. Changes to forest structure and microclimate may adversely affect some taxa (e.g., terrestrial salamanders), but positively affect others (e.g., early successional birds). Salamanders are cited as indicators of ecosystem health because of...

Gender and Batterer Intervention: Implications of a Program Evaluation for Policy and Treatment

ERIC Educational Resources Information Center

Hamel, John; Ferreira, Regardt J.; Buttell, Fred

2017-01-01

Objective: The purpose of the present study was to investigate the impact of gender and other variables commonly associated with intimate partner abuse perpetration on program completion and pretreatment abusiveness profiles among a sample of men and women ordered into a 52-week batterer intervention program (BIP). Method: The study employed a…

Dissociative recombination by frame transformation to Siegert pseudostates: A comparison with a numerically solvable model

NASA Astrophysics Data System (ADS)

Hvizdoš, Dávid; Váňa, Martin; Houfek, Karel; Greene, Chris H.; Rescigno, Thomas N.; McCurdy, C. William; Čurík, Roman

2018-02-01

We present a simple two-dimensional model of the indirect dissociative recombination process. The model has one electronic and one nuclear degree of freedom and it can be solved to high precision, without making any physically motivated approximations, by employing the exterior complex scaling method together with the finite-elements method and discrete variable representation. The approach is applied to solve a model for dissociative recombination of H2 + in the singlet ungerade channels, and the results serve as a benchmark to test validity of several physical approximations commonly used in the computational modeling of dissociative recombination for real molecular targets. The second, approximate, set of calculations employs a combination of multichannel quantum defect theory and frame transformation into a basis of Siegert pseudostates. The cross sections computed with the two methods are compared in detail for collision energies from 0 to 2 eV.

Estimating dead wood during national forest inventories: a review of inventory methodologies and suggestions for harmonization.

PubMed

Woodall, Christopher W; Rondeux, Jacques; Verkerk, Pieter J; Ståhl, Göran

2009-10-01

Efforts to assess forest ecosystem carbon stocks, biodiversity, and fire hazards have spurred the need for comprehensive assessments of forest ecosystem dead wood (DW) components around the world. Currently, information regarding the prevalence, status, and methods of DW inventories occurring in the world's forested landscapes is scattered. The goal of this study is to describe the status, DW components measured, sample methods employed, and DW component thresholds used by national forest inventories that currently inventory DW around the world. Study results indicate that most countries do not inventory forest DW. Globally, we estimate that about 13% of countries inventory DW using a diversity of sample methods and DW component definitions. A common feature among DW inventories was that most countries had only just begun DW inventories and employ very low sample intensities. There are major hurdles to harmonizing national forest inventories of DW: differences in population definitions, lack of clarity on sample protocols/estimation procedures, and sparse availability of inventory data/reports. Increasing database/estimation flexibility, developing common dimensional thresholds of DW components, publishing inventory procedures/protocols, releasing inventory data/reports to international peer review, and increasing communication (e.g., workshops) among countries inventorying DW are suggestions forwarded by this study to increase DW inventory harmonization.

Method for producing high surface area chromia materials for catalysis

DOEpatents

Gash, Alexander E [Brentwood, CA; Satcher, Joe [Patterson, CA; Tillotson, Thomas [Tracy, CA; Hrubesh, Lawrence [Pleasanton, CA; Simpson, Randall [Livermore, CA

2007-05-01

Nanostructured chromium(III)-oxide-based materials using sol-gel processing and a synthetic route for producing such materials are disclosed herein. Monolithic aerogels and xerogels having surface areas between 150 m.sup.2/g and 520 m.sup.2/g have been produced. The synthetic method employs the use of stable and inexpensive hydrated-chromium(III) inorganic salts and common solvents such as water, ethanol, methanol, 1-propanol, t-butanol, 2-ethoxy ethanol, and ethylene glycol, DMSO, and dimethyl formamide. The synthesis involves the dissolution of the metal salt in a solvent followed by an addition of a proton scavenger, such as an epoxide, which induces gel formation in a timely manner. Both critical point (supercritical extraction) and atmospheric (low temperature evaporation) drying may be employed to produce monolithic aerogels and xerogels, respectively.

Method of monolithic module assembly

DOEpatents

Gee, James M.; Garrett, Stephen E.; Morgan, William P.; Worobey, Walter

1999-01-01

Methods for "monolithic module assembly" which translate many of the advantages of monolithic module construction of thin-film PV modules to wafered c-Si PV modules. Methods employ using back-contact solar cells positioned atop electrically conductive circuit elements affixed to a planar support so that a circuit capable of generating electric power is created. The modules are encapsulated using encapsulant materials such as EVA which are commonly used in photovoltaic module manufacture. The methods of the invention allow multiple cells to be electrically connected in a single encapsulation step rather than by sequential soldering which characterizes the currently used commercial practices.

A Substance Use Cost Calculator for US Employers With an Emphasis on Prescription Pain Medication Misuse

PubMed Central

Goplerud, Eric; Hodge, Sarah; Benham, Tess

2017-01-01

Objective: Substance use disorders are among the most common and costly health conditions affecting Americans. Despite estimates of national costs exceeding $400 billion annually, individual companies may not see how substance use impacts their bottom lines through lost productivity and absenteeism, turnover, health care expenses, disability, and workers’ compensation. Methods: Data on employed adults (18 years and older) from 3 years (2012 to 2014) of the National Survey on Drug Use and Health Public Use Data Files were analyzed. Results: The results offer employers an authoritative, free, epidemiologically grounded, and easy-to-use tool that gives specific information about how alcohol, prescription pain medication misuse, and illicit drug use is likely impacting workplaces like theirs. Conclusion: Employers have detailed reports of the cost of substance use that can be used to improve workplace policies and health benefits. PMID:29116987

Use of an employment advisory service by cancer survivors.

PubMed

Lawlor, Emma R; Donnelly, Michael

2015-01-01

Employment issues for cancer survivors (CS) were investigated from the perspective of Northern Ireland government general employment advisors. An e-survey was designed and developed based on the results of a scoping search of journal articles, previously validated questionnaires and relevant related surveys; discussions of draft versions of the e-survey and method with lead representatives of stakeholder organizations; and a pilot study with seven prospective respondents. The e-survey and subsequent reminder to employment advisors were distributed internally by the government employment advisory agency. The e-survey was completed by 78/156 (50%) advisors, the majority of whom (74%) received a request for advice in the last year from at least one CS. Most CS used the employment service less than 1 year (52%) or 1 year or more after treatment (32%). Fatigue was the most commonly reported barrier to returning to work (10%) and staying in work (14%), and a supportive employer was the top facilitating factor in returning to (21%) and continuing in (27%), employment. Although most advisors had a positive attitude about a CS's capacity to return to work, half were uncertain about how best to advise cancer survivors.

Implications of cost-effectiveness analysis of medical technology. background paper number 5. four common x-ray procedures: problems and prospects for economic evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, J.L.; Krieger, M.J.

This paper is about the economic evaluation of diagnostic procedures. The issue of economic evaluation is explored in the context of four common diagnostic X-ray procedures: the chest X-ray, the skull X-ray, the barium enema study, and the excretory urogram. The paper is divided into two parts. The first part summarizes the different evaluative models underlying studies of the four diagnostic X-ray procedures and to lay out the strengths and weaknesses of each method. The second part contains four separate chapters summarizing what is known about the utilization, costs, risks, and benefits of each procedure, with particular emphasis on themore » evaluative methods employed.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Byerly, Benjamin L.; Stanley, Floyd; Spencer, Khal

In our study, a certified plutonium metal reference material (CRM 126) with a known production history is examined using analytical methods that are commonly employed in nuclear forensics for provenancing and attribution. Moreover, the measured plutonium isotopic composition and actinide assay are consistent with values reported on the reference material certificate. Model ages from U/Pu and Am/Pu chronometers agree with the documented production timeline. Finally, these results confirm the utility of these analytical methods and highlight the importance of a holistic approach for forensic study of unknown materials.

Spectral functions at small energies and the electrical conductivity in hot quenched lattice QCD.

PubMed

Aarts, Gert; Allton, Chris; Foley, Justin; Hands, Simon; Kim, Seyong

2007-07-13

In lattice QCD, the maximum entropy method can be used to reconstruct spectral functions from Euclidean correlators obtained in numerical simulations. We show that at finite temperature the most commonly used algorithm, employing Bryan's method, is inherently unstable at small energies and gives a modification that avoids this. We demonstrate this approach using the vector current-current correlator obtained in quenched QCD at finite temperature. Our first results indicate a small electrical conductivity above the deconfinement transition.

Spectrometer Baseline Control Via Spatial Filtering

NASA Technical Reports Server (NTRS)

Burleigh, M. R.; Richey, C. R.; Rinehart, S. A.; Quijada, M. A.; Wollack, E. J.

2016-01-01

An absorptive half-moon aperture mask is experimentally explored as a broad-bandwidth means of eliminating spurious spectral features arising from reprocessed radiation in an infrared Fourier transform spectrometer. In the presence of the spatial filter, an order of magnitude improvement in the fidelity of the spectrometer baseline is observed. The method is readily accommodated within the context of commonly employed instrument configurations and leads to a factor of two reduction in optical throughput. A detailed discussion of the underlying mechanism and limitations of the method are provided.

Military applications and examples of near-surface seismic surface wave methods (Invited)

NASA Astrophysics Data System (ADS)

sloan, S.; Stevens, R.

2013-12-01

Although not always widely known or publicized, the military uses a variety of geophysical methods for a wide range of applications--some that are already common practice in the industry while others are truly novel. Some of those applications include unexploded ordnance detection, general site characterization, anomaly detection, countering improvised explosive devices (IEDs), and security monitoring, to name a few. Techniques used may include, but are not limited to, ground penetrating radar, seismic, electrical, gravity, and electromagnetic methods. Seismic methods employed include surface wave analysis, refraction tomography, and high-resolution reflection methods. Although the military employs geophysical methods, that does not necessarily mean that those methods enable or support combat operations--often times they are being used for humanitarian applications within the military's area of operations to support local populations. The work presented here will focus on the applied use of seismic surface wave methods, including multichannel analysis of surface waves (MASW) and backscattered surface waves, often in conjunction with other methods such as refraction tomography or body-wave diffraction analysis. Multiple field examples will be shown, including explosives testing, tunnel detection, pre-construction site characterization, and cavity detection.

Experiential Growth Group in Counselor Education: A Review of Its Pedagogy, Research, and Ethical Dilemmas

ERIC Educational Resources Information Center

Zhu, Peitao

2018-01-01

The experiential growth group (EGG) is a common pedagogical activity employed in counselor education and is required by CACREP and ASGW standards. However, various parameters of such a training modality were not specified. The author first reviewed the multitude of current EGG delivery methods and student experiences in EGG. Then, 3 aspects of the…

Infrared Dielectric Properties of Low-Stress Silicon Oxide

NASA Technical Reports Server (NTRS)

Cataldo, Giuseppe; Wollack, Edward J.; Brown, Ari D.; Miller, Kevin H.

2016-01-01

Silicon oxide thin films play an important role in the realization of optical coatings and high-performance electrical circuits. Estimates of the dielectric function in the far- and mid-infrared regime are derived from the observed transmittance spectrum for a commonly employed low-stress silicon oxide formulation. The experimental, modeling, and numerical methods used to extract the dielectric function are presented.

Microteaching Lesson Study: An Approach to Prepare Teacher Candidates to Teach Science through Inquiry

ERIC Educational Resources Information Center

Zhou, George; Xu, Judy

2017-01-01

Inquiry-based teaching has become the most recommended approach in science education for a few decades; however, it is not a common practice yet in k-12 school classrooms. In order to prepare future teachers to teach science through inquiry, a Microteaching Lesson Study (MLS) approach was employed in our science methods courses. Instead of asking…

Characterization and analysis of the molecular weight of lignin for biorefining studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tolbert, Allison; Akinosho, Hannah; Khunsupat, Ratayakorn

2014-06-04

The molecular weight of lignin is a fundamental property that infl uences the recalcitrance of biomass and the valorization of lignin. The determination of the molecular weight of lignin in native biomass is dependent on the bioresources used and the isolation and purifi cation procedures employed. The three most commonly employed isolation methods are milled wood lignin (MWL), cellulolytic enzyme lignin (CEL), and enzymatic mild acidolysis lignin (EMAL). Common characterization techniques for determining the molecular weight of lignin will be addressed, with an emphasis on gel permeation chromatography (GPC). This review also examines the mechanisms behind several biological, physical, andmore » chemical pre-treatments and their impact on the molecular weight of lignin. The number average molecular weight (Mn), weight average molecular weight (Mw) and polydispersity index (D) all vary in magnitude depending on the biomass source, pre-treatment conditions, and isolation method. Additionally, there is a growing body of literature that supports changes in the molecular weight of lignin in response to genetic modifi cations in the lignin biosynthetic pathways. This review summarizes different procedures for obtaining the molecular weight of lignin that have been used in recent years and highlight future opportunities for applications of lignin.« less

The experience of seeking, gaining and maintaining employment after traumatic spinal cord injury and the vocational pathways involved.

PubMed

Hilton, Gillean; Unsworth, Carolyn A; Stuckey, Ruth; Murphy, Gregory C

2018-01-01

Vocational potential in people with spinal cord injury (SCI) are unrealised with rates of employment substantially lower than in the labour force participation of the general population and the pre-injury employment rates. To understand the experience and pathway of people achieving employment outcome after traumatic spinal cord injury by; classifying participants into employment outcome groups of stable, unstable and without employment; identifying pre and post-injury pathways for participants in each group and, exploring the experiences of people of seeking, gaining and maintaining employment. Thirty-one participants were interviewed. Mixed methods approach including interpretive phenomenological analysis and vocational pathway mapping of quantitative data. The most common pathway identified was from study and work pre-injury to stable employment post-injury. Four super-ordinate themes were identified from the interpretive phenomenological analysis; expectations of work, system impacts, worker identity and social supports. Implications for clinical practice include fostering cultural change, strategies for system navigation, promotion of worker identity and optimal use of social supports. The findings increase insight and understanding of the complex experience of employment after spinal cord injury. There is opportunity to guide experimental research, policy development and education concerning the complexity of the return to work experience and factors that influence pathways.

QR code based noise-free optical encryption and decryption of a gray scale image

NASA Astrophysics Data System (ADS)

Jiao, Shuming; Zou, Wenbin; Li, Xia

2017-03-01

In optical encryption systems, speckle noise is one major challenge in obtaining high quality decrypted images. This problem can be addressed by employing a QR code based noise-free scheme. Previous works have been conducted for optically encrypting a few characters or a short expression employing QR codes. This paper proposes a practical scheme for optically encrypting and decrypting a gray-scale image based on QR codes for the first time. The proposed scheme is compatible with common QR code generators and readers. Numerical simulation results reveal the proposed method can encrypt and decrypt an input image correctly.

Evaluation and optimisation of preparative semi-automated electrophoresis systems for Illumina library preparation.

PubMed

Quail, Michael A; Gu, Yong; Swerdlow, Harold; Mayho, Matthew

2012-12-01

Size selection can be a critical step in preparation of next-generation sequencing libraries. Traditional methods employing gel electrophoresis lack reproducibility, are labour intensive, do not scale well and employ hazardous interchelating dyes. In a high-throughput setting, solid-phase reversible immobilisation beads are commonly used for size-selection, but result in quite a broad fragment size range. We have evaluated and optimised the use of two semi-automated preparative DNA electrophoresis systems, the Caliper Labchip XT and the Sage Science Pippin Prep, for size selection of Illumina sequencing libraries. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Factor analysis of some socio-economic and demographic variables for Bangladesh.

PubMed

Islam, S M

1986-01-01

The author carries out an exploratory factor analysis of some socioeconomic and demographic variables for Bangladesh using the classical or common factor approach with the varimax rotation method. The socioeconomic and demographic indicators used in this study include literacy, rate of growth, female employment, economic development, urbanization, population density, childlessness, sex ratio, proportion of women ever married, and fertility. The 18 administrative districts of Bangladesh constitute the unit of analysis. 3 common factors--modernization, fertility, and social progress--are identified in this study to explain the correlations among the set of selected socioeconomic and demographic variables.

Using collective variables to drive molecular dynamics simulations

NASA Astrophysics Data System (ADS)

Fiorin, Giacomo; Klein, Michael L.; Hénin, Jérôme

2013-12-01

A software framework is introduced that facilitates the application of biasing algorithms to collective variables of the type commonly employed to drive massively parallel molecular dynamics (MD) simulations. The modular framework that is presented enables one to combine existing collective variables into new ones, and combine any chosen collective variable with available biasing methods. The latter include the classic time-dependent biases referred to as steered MD and targeted MD, the temperature-accelerated MD algorithm, as well as the adaptive free-energy biases called metadynamics and adaptive biasing force. The present modular software is extensible, and portable between commonly used MD simulation engines.

Strategies for Working with Employers and Union Reps. How To Respond to Common Reasons for Not Hiring Women in NTOs.

ERIC Educational Resources Information Center

Wider Opportunities for Women, Inc., Washington, DC.

This paper provides tips for approaching employers and labor union representatives on the issue of hiring more women in nontraditional occupations, suggesting ways to respond to common excuses for not hiring women in such occupations. The paper first lists general strategies for developing a good working relationship with employers and union…

20 CFR 655.715 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Employment Standards Administration, DOL. Employed, employed by the employer, or employment relationship means the employment relationship as determined under the common law, under which the key determinant is... * * *. [A]ll of the incidents of the relationship must be assessed and weighed with no one factor being...

Flow Control and Measurement in Electric Propulsion Systems: Towards an AIAA Reference Standard

NASA Technical Reports Server (NTRS)

Snyder, John Steven; Baldwin, Jeff; Frieman, Jason D.; Walker, Mitchell L. R.; Hicks, Nathan S.; Polzin, Kurt A.; Singleton, James T.

2013-01-01

Accurate control and measurement of propellant flow to a thruster is one of the most basic and fundamental requirements for operation of electric propulsion systems, whether they be in the laboratory or on flight spacecraft. Hence, it is important for the electric propulsion community to have a common understanding of typical methods for flow control and measurement. This paper addresses the topic of propellant flow primarily for the gaseous propellant systems which have dominated laboratory research and flight application over the last few decades, although other types of systems are also briefly discussed. While most flight systems have employed a type of pressure-fed flow restrictor for flow control, both thermal-based and pressure-based mass flow controllers are routinely used in laboratories. Fundamentals and theory of operation of these types of controllers are presented, along with sources of uncertainty associated with their use. Methods of calibration and recommendations for calibration processes are presented. Finally, details of uncertainty calculations are presented for some common calibration methods and for the linear fits to calibration data that are commonly used.

Applications of multigrid software in the atmospheric sciences

NASA Technical Reports Server (NTRS)

Adams, J.; Garcia, R.; Gross, B.; Hack, J.; Haidvogel, D.; Pizzo, V.

1992-01-01

Elliptic partial differential equations from different areas in the atmospheric sciences are efficiently and easily solved utilizing the multigrid software package named MUDPACK. It is demonstrated that the multigrid method is more efficient than other commonly employed techniques, such as Gaussian elimination and fixed-grid relaxation. The efficiency relative to other techniques, both in terms of storage requirement and computational time, increases quickly with grid size.

Determination of Pb in Biological Samples by Graphite Furnace Atomic Absorption Spectrophotometry: An Exercise in Common Interferences and Fundamental Practices in Trace Element Determination

ERIC Educational Resources Information Center

Spudich, Thomas M.; Herrmann, Jennifer K.; Fietkau, Ronald; Edwards, Grant A.

2004-01-01

An experiment is conducted to ascertain trace-level Pb in samples of bovine liver or muscle by applying graphite furnace atomic absorption spectrophotometry (GFAAS). The primary objective is to display the effects of physical and spectral intrusions in determining trace elements, and project the usual methods employed to minimize accuracy errors…

Infrared Dielectric Properties of Low-stress Silicon Nitride

NASA Technical Reports Server (NTRS)

Cataldo, Giuseppe; Beall, James A.; Cho, Hsiao-Mei; McAndrew, Brendan; Niemack, Michael D.; Wollack, Edward J.

2012-01-01

Silicon nitride thin films play an important role in the realization of sensors, filters, and high-performance circuits. Estimates of the dielectric function in the far- and mid-IR regime are derived from the observed transmittance spectra for a commonly employed low-stress silicon nitride formulation. The experimental, modeling, and numerical methods used to extract the dielectric parameters with an accuracy of approximately 4% are presented.

A Generic Method for Distribution and Transfer of ECTS and Other Norm-Referenced Grades within Student Cohorts

ERIC Educational Resources Information Center

Warfvinge, Per

2008-01-01

The ECTS grade transfer scale is an interface grade scale to help European universities, students and employers to understand the level of student achievement. Hence, the ECTS scale can be seen as an interface, transforming local scales to a common system where A-E denote passing grades. By definition, ECTS should distribute the passing students…

The prevalence of anti-acetylcholinesterase antibodies in autoimmune disease.

PubMed

Geen, J; Howells, R C; Ludgate, M; Hullin, D A; Hogg, S I

2004-12-01

A robust and precise enzyme linked immunosorbent assay (ELISA) with proven sensitivity and specificity has been employed to detect human antibodies (allogenic/autogenic) to human acetylcholinesterase (AChE). The sensitivity of the method has been established using mouse monoclonal antibodies (0.8 ng/ml) and uniquely, human sera positive for anti-Yt(a) allogenic antibodies, to one phenotypic form (most common) of human AChE. The latter was also used as the positive human control to ensure functionality of the assay. The ELISA method was used to establish a normal distribution curve for absorbance values employing sera from healthy blood donors Subsequently, the ELISA was employed to investigate the prevalence of anti-AChE antibodies in patients with confirmed autoimmune disease and patients with non-autoimmune thyroid disease (diseased control). The results indicate that there is not a high prevalence of anti-AChE antibodies in patients with confirmed autoimmune disease. The lack of anti-AChE autoantibodies in patients' with clinically apparent Graves' ophthalmopathy, mitigates against there being a causal role of such antibodies in Graves' associated eye disease.

Defining adherence to therapeutic exercise for musculoskeletal pain: a systematic review.

PubMed

Bailey, Daniel L; Holden, Melanie A; Foster, Nadine E; Quicke, Jonathan G; Haywood, Kirstie L; Bishop, Annette

2018-06-06

To establish the meaning of the term 'adherence' (including conceptual and measurement definitions) in the context of therapeutic exercise (TE) for musculoskeletal (MSK) pain. Systematic review using a search strategy including terms for: adherence, TE and MSK pain. Identified studies were independently screened for inclusion by two researchers. Two independent researchers extracted data on: study type; MSK pain population; type of TE used; definitions, parameters, measurement methods and values of adherence. Seven electronic databases were searched from inception to December 2016. Any study type featuring TE for adults with MSK pain and containing a definition of adherence, or a description of how adherence was measured. 459 studies were identified and 86 were included in the review. Most were prospective cohort studies and featured back and/or neck pain. Strengthening and stretching were the most common types of TE. A clearly identifiable definition of adherence was provided in 40% of the studies, with 12% using the same definition. Exercise frequency was the most commonly measured parameter of adherence, with self-report logs the most common measurement method. The most common value range used to determine satisfactory adherence was 80%-99% of the recommended exercise dose. No single definition of adherence to TE was apparent. We found no definition of adherence that specifically related to TE for MSK pain or described the dimensions of TE that should be measured. We recommend conceptualising adherence to TE for MSK pain from the perspective of all relevant stakeholders. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

A New Approach for Mining Order-Preserving Submatrices Based on All Common Subsequences.

PubMed

Xue, Yun; Liao, Zhengling; Li, Meihang; Luo, Jie; Kuang, Qiuhua; Hu, Xiaohui; Li, Tiechen

2015-01-01

Order-preserving submatrices (OPSMs) have been applied in many fields, such as DNA microarray data analysis, automatic recommendation systems, and target marketing systems, as an important unsupervised learning model. Unfortunately, most existing methods are heuristic algorithms which are unable to reveal OPSMs entirely in NP-complete problem. In particular, deep OPSMs, corresponding to long patterns with few supporting sequences, incur explosive computational costs and are completely pruned by most popular methods. In this paper, we propose an exact method to discover all OPSMs based on frequent sequential pattern mining. First, an existing algorithm was adjusted to disclose all common subsequence (ACS) between every two row sequences, and therefore all deep OPSMs will not be missed. Then, an improved data structure for prefix tree was used to store and traverse ACS, and Apriori principle was employed to efficiently mine the frequent sequential pattern. Finally, experiments were implemented on gene and synthetic datasets. Results demonstrated the effectiveness and efficiency of this method.

The Role of 3 Tesla MRA in the Detection of Intracranial Aneurysms

PubMed Central

Kapsalaki, Eftychia Z.; Rountas, Christos D.; Fountas, Kostas N.

2012-01-01

Intracranial aneurysms constitute a common pathological entity, affecting approximately 1–8% of the general population. Their early detection is essential for their prompt treatment. Digital subtraction angiography is considered the imaging method of choice. However, other noninvasive methodologies such as CTA and MRA have been employed in the investigation of patients with suspected aneurysms. MRA is a noninvasive angiographic modality requiring no radiation exposure. However, its sensitivity and diagnostic accuracy were initially inadequate. Several MRA techniques have been developed for overcoming all these drawbacks and for improving its sensitivity. 3D TOF MRA and contrast-enhanced MRA are the most commonly employed techniques. The introduction of 3 T magnetic field further increased MRA's sensitivity, allowing detection of aneurysms smaller than 3 mm. The development of newer MRA techniques may provide valuable information regarding the flow characteristics of an aneurysm. Meticulous knowledge of MRA's limitations and pitfalls is of paramount importance for avoiding any erroneous interpretation of its findings. PMID:22292121

Improving the quality of parameter estimates obtained from slug tests

USGS Publications Warehouse

Butler, J.J.; McElwee, C.D.; Liu, W.

1996-01-01

The slug test is one of the most commonly used field methods for obtaining in situ estimates of hydraulic conductivity. Despite its prevalence, this method has received criticism from many quarters in the ground-water community. This criticism emphasizes the poor quality of the estimated parameters, a condition that is primarily a product of the somewhat casual approach that is often employed in slug tests. Recently, the Kansas Geological Survey (KGS) has pursued research directed it improving methods for the performance and analysis of slug tests. Based on extensive theoretical and field research, a series of guidelines have been proposed that should enable the quality of parameter estimates to be improved. The most significant of these guidelines are: (1) three or more slug tests should be performed at each well during a given test period; (2) two or more different initial displacements (Ho) should be used at each well during a test period; (3) the method used to initiate a test should enable the slug to be introduced in a near-instantaneous manner and should allow a good estimate of Ho to be obtained; (4) data-acquisition equipment that enables a large quantity of high quality data to be collected should be employed; (5) if an estimate of the storage parameter is needed, an observation well other than the test well should be employed; (6) the method chosen for analysis of the slug-test data should be appropriate for site conditions; (7) use of pre- and post-analysis plots should be an integral component of the analysis procedure, and (8) appropriate well construction parameters should be employed. Data from slug tests performed at a number of KGS field sites demonstrate the importance of these guidelines.

Forensic investigation of plutonium metal: a case study of CRM 126

DOE PAGES

Byerly, Benjamin L.; Stanley, Floyd; Spencer, Khal; ...

2016-11-01

In our study, a certified plutonium metal reference material (CRM 126) with a known production history is examined using analytical methods that are commonly employed in nuclear forensics for provenancing and attribution. Moreover, the measured plutonium isotopic composition and actinide assay are consistent with values reported on the reference material certificate. Model ages from U/Pu and Am/Pu chronometers agree with the documented production timeline. Finally, these results confirm the utility of these analytical methods and highlight the importance of a holistic approach for forensic study of unknown materials.

Methods for using argon-39 to age-date groundwater using ultra-low-background proportional counting

DOE PAGES

Mace, Emily; Aalseth, Craig; Brandenberger, Jill; ...

2016-12-21

Argon-39 can be used as a tracer for age-dating glaciers, oceans, and more recently, groundwater. With a half-life of 269 years, 39Ar fills an intermediate age range gap (50–1,000 years) not currently covered by other common groundwater tracers. Therefore, adding this tracer to the data suite for groundwater studies provides an important tool for improving our understanding of groundwater systems. Lastly, we present the methods employed for arriving at an age-date for a given sample of argon degassed from groundwater.

Fundamentals of electrochemical detection techniques for CE and MCE.

PubMed

Kubán, Pavel; Hauser, Peter C

2009-10-01

The electroanalytical techniques of amperometry, conductometry and potentiometry match well with the instrumental simplicity of CE. Indeed, all three detection approaches have been reported for electrophoretic separations. However, the characteristics of the three methods are quite distinct and these are not related to the optical methods more commonly employed. A detailed discussion of the underlying principles of each is given. The issue of possible effects of the separation voltage on the electrochemical detection techniques is considered in depth, and approaches to the elimination of such interferences are also discussed for each case.

Measuring Seebeck Coefficient

NASA Technical Reports Server (NTRS)

Snyder, G. Jeffrey (Inventor)

2015-01-01

A high temperature Seebeck coefficient measurement apparatus and method with various features to minimize typical sources of errors is described. Common sources of temperature and voltage measurement errors which may impact accurate measurement are identified and reduced. Applying the identified principles, a high temperature Seebeck measurement apparatus and method employing a uniaxial, four-point geometry is described to operate from room temperature up to 1300K. These techniques for non-destructive Seebeck coefficient measurements are simple to operate, and are suitable for bulk samples with a broad range of physical types and shapes.

Methods for using argon-39 to age-date groundwater using ultra-low-background proportional counting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mace, Emily; Aalseth, Craig; Brandenberger, Jill

Argon-39 can be used as a tracer for age-dating glaciers, oceans, and more recently, groundwater. With a half-life of 269 years, 39Ar fills an intermediate age range gap (50-1,000 years) not currently covered by other common groundwater tracers. Therefore, adding this tracer to the data suite for groundwater studies provides an important tool for improving our understanding of groundwater systems. We present the methods employed for arriving at an age-date for a given sample of argon degassed from groundwater.

Methods for using argon-39 to age-date groundwater using ultra-low-background proportional counting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mace, Emily; Aalseth, Craig; Brandenberger, Jill

Argon-39 can be used as a tracer for age-dating glaciers, oceans, and more recently, groundwater. With a half-life of 269 years, 39Ar fills an intermediate age range gap (50–1,000 years) not currently covered by other common groundwater tracers. Therefore, adding this tracer to the data suite for groundwater studies provides an important tool for improving our understanding of groundwater systems. Lastly, we present the methods employed for arriving at an age-date for a given sample of argon degassed from groundwater.

Teaching methods and surgical training in North American graduate periodontics programs: exploring the landscape.

PubMed

Ghiabi, Edmond; Taylor, K Lynn

2010-06-01

This project aimed at documenting the surgical training curricula offered by North American graduate periodontics programs. A survey consisting of questions on teaching methods employed and the content of the surgical training program was mailed to directors of all fifty-eight graduate periodontics programs in Canada and the United States. The chi-square test was used to assess whether the residents' clinical experience was significantly (P<0.05) influenced by having a) a structured preclinical program or b) another dental residency program in the institution. Thirty-four programs (59 percent) responded to the survey. Twenty-six programs (76 percent of respondents) reported offering a structured preclinical component. Traditional teaching methods such as slides, live demonstration, DVD/CD, and animal cadavers were the most common teaching methods used, whereas online courses, computer simulation, and various surgical mannequins were least commonly used. The most commonly performed surgical procedures were conventional flaps, periodontal plastic procedures, hard tissue grafts, and implants. Furthermore, residents in programs offering a structured preclinical component performed significantly more procedures (P=0.012) using lasers than those in programs not offering a structured preclinical program. Devising new and innovative teaching methods is a clear avenue for future development in North American graduate periodontics programs.

Influence of an Interdisciplinary Re-employment Programme Among Unemployed Persons with Mental Health Problems on Health, Social Participation and Paid Employment.

PubMed

Carlier, Bouwine E; Schuring, Merel; Burdorf, Alex

2018-03-01

Purpose To evaluate the influence of an interdisciplinary re-employment programme on labour force participation and perceived health among unemployed persons with common mental health problems. In addition, the influence of entering paid employment on self-rated physical health and mental health was investigated. Methods In this quasi-experimental study with 2 years follow up, 869 persons were enrolled after referral to an interdisciplinary re-employment programme (n = 380) or regular re-employment programme (n = 489). The propensity score technique was used to account for observed differences between the intervention and control group. The intervention programme was provided by an interdisciplinary team, consisting of mental health care professionals as well as employment specialists. Mental health problems were addressed through cognitive counselling and individual tailored job-search support was provided by an employment professional. Primary outcome measures were paid employment and voluntary work. Secondary outcome measures were self-rated mental and physical health, measured by the Short Form 12 Health Survey, and anxiety and depressive symptoms, measured by the Kessler Psychological Distress Scale. Changes in labour force participation and health were examined with repeated-measures logistic regression analyses by the generalized estimating equations method. Results The interdisciplinary re-employment programme did not have a positive influence on entering employment or physical or mental health among unemployed persons with mental health problems. After 2 years, 10% of the participants of the intervention programme worked fulltime, compared to 4% of the participants of the usual programmes (adjusted OR 1.65). The observed differences in labour force participation were not statistically significant. However, among persons who entered paid employment, physical health improved (+16%) and anxiety and depressive symptoms decreased (-15%), whereas health remained unchanged among persons who continued to be unemployed. Conclusions Policies to improve population health should take into account that promoting paid employment may be an effective intervention to improve health. It is recommended to invest in interdisciplinary re-employment programmes with a first place and train approach.

Vocational Rehabilitation in Spinal Cord Injury: What Vocational Service Activities Are Associated with Employment Program Outcome?

PubMed Central

Barnett, Scott D.; Goetz, Lance L.; Toscano, Richard

2015-01-01

Background: Designing effective vocational programs for persons with spinal cord injury (SCI) is essential for improving return to work outcome following injury. The relationship between specific vocational services and positive employment outcome has not been empirically studied. Objective: To examine the association of specific vocational service activities as predictors of employment. Method: Secondary analysis of a randomized, controlled trial of evidence-based supported employment (EBSE) with 12-month follow-up data among 81 Veteran participants with SCI. Results: Primary activities recorded were vocational counseling (23.9%) and vocational case management (23.8%). As expected, job development and employment supports were the most time-consuming activities per appointment. Though the amount of time spent in weekly appointments did not differ by employment outcome, participants obtaining competitive employment averaged significantly more individual activities per appointment. Further, for these participants, job development or placement and employment follow-along or supports were more likely to occur and vocational counseling was less likely to occur. Community-based employment services, including job development or placement and employment follow-along or supports as part of a supported employment model, were associated with competitive employment outcomes. Office-based vocational counseling services, which are common to general models of vocational rehabilitation, were associated with a lack of employment. Conclusions: Vocational services that actively engage Veterans with SCI in job seeking and acquisition and that provide on-the-job support are more likely to lead to employment than general vocational counseling that involves only job preparation. PMID:25762858

Construction of multi-scale consistent brain networks: methods and applications.

PubMed

Ge, Bao; Tian, Yin; Hu, Xintao; Chen, Hanbo; Zhu, Dajiang; Zhang, Tuo; Han, Junwei; Guo, Lei; Liu, Tianming

2015-01-01

Mapping human brain networks provides a basis for studying brain function and dysfunction, and thus has gained significant interest in recent years. However, modeling human brain networks still faces several challenges including constructing networks at multiple spatial scales and finding common corresponding networks across individuals. As a consequence, many previous methods were designed for a single resolution or scale of brain network, though the brain networks are multi-scale in nature. To address this problem, this paper presents a novel approach to constructing multi-scale common structural brain networks from DTI data via an improved multi-scale spectral clustering applied on our recently developed and validated DICCCOLs (Dense Individualized and Common Connectivity-based Cortical Landmarks). Since the DICCCOL landmarks possess intrinsic structural correspondences across individuals and populations, we employed the multi-scale spectral clustering algorithm to group the DICCCOL landmarks and their connections into sub-networks, meanwhile preserving the intrinsically-established correspondences across multiple scales. Experimental results demonstrated that the proposed method can generate multi-scale consistent and common structural brain networks across subjects, and its reproducibility has been verified by multiple independent datasets. As an application, these multi-scale networks were used to guide the clustering of multi-scale fiber bundles and to compare the fiber integrity in schizophrenia and healthy controls. In general, our methods offer a novel and effective framework for brain network modeling and tract-based analysis of DTI data.

Uranium series, volcanic rocks

USGS Publications Warehouse

Vazquez, Jorge A.

2014-01-01

Application of U-series dating to volcanic rocks provides unique and valuable information about the absolute timing of crystallization and differentiation of magmas prior to eruption. The 238U–230Th and 230Th-226Ra methods are the most commonly employed for dating the crystallization of mafic to silicic magmas that erupt at volcanoes. Dates derived from the U–Th and Ra–Th methods reflect crystallization because diffusion of these elements at magmatic temperatures is sluggish (Cherniak 2010) and diffusive re-equilibration is insignificant over the timescales (less than or equal to 10^5 years) typically associated with pre-eruptive storage of nearly all magma compositions (Cooper and Reid 2008). Other dating methods based on elements that diffuse rapidly at magmatic temperatures, such as the 40Ar/39Ar and (U–Th)/He methods, yield dates for the cooling of magma at the time of eruption. Disequilibrium of some short-lived daughters of the uranium series such as 210Po may be fractionated by saturation of a volatile phase and can be employed to date magmatic gas loss that is synchronous with volcanic eruption (e.g., Rubin et al. 1994).

A Simple Method to Improve Autonomous GPS Positioning for Tractors

PubMed Central

Gomez-Gil, Jaime; Alonso-Garcia, Sergio; Gómez-Gil, Francisco Javier; Stombaugh, Tim

2011-01-01

Error is always present in the GPS guidance of a tractor along a desired trajectory. One way to reduce GPS guidance error is by improving the tractor positioning. The most commonly used ways to do this are either by employing more precise GPS receivers and differential corrections or by employing GPS together with some other local positioning systems such as electronic compasses or Inertial Navigation Systems (INS). However, both are complex and expensive solutions. In contrast, this article presents a simple and low cost method to improve tractor positioning when only a GPS receiver is used as the positioning sensor. The method is based on placing the GPS receiver ahead of the tractor, and on applying kinematic laws of tractor movement, or a geometric approximation, to obtain the midpoint position and orientation of the tractor rear axle more precisely. This precision improvement is produced by the fusion of the GPS data with tractor kinematic control laws. Our results reveal that the proposed method effectively reduces the guidance GPS error along a straight trajectory. PMID:22163917

A Bitslice Implementation of Anderson's Attack on A5/1

NASA Astrophysics Data System (ADS)

Bulavintsev, Vadim; Semenov, Alexander; Zaikin, Oleg; Kochemazov, Stepan

2018-03-01

The A5/1 keystream generator is a part of Global System for Mobile Communications (GSM) protocol, employed in cellular networks all over the world. Its cryptographic resistance was extensively analyzed in dozens of papers. However, almost all corresponding methods either employ a specific hardware or require an extensive preprocessing stage and significant amounts of memory. In the present study, a bitslice variant of Anderson's Attack on A5/1 is implemented. It requires very little computer memory and no preprocessing. Moreover, the attack can be made even more efficient by harnessing the computing power of modern Graphics Processing Units (GPUs). As a result, using commonly available GPUs this method can quite efficiently recover the secret key using only 64 bits of keystream. To test the performance of the implementation, a volunteer computing project was launched. 10 instances of A5/1 cryptanalysis have been successfully solved in this project in a single week.

Communication rehabilitation in sub-Saharan Africa: The role of speech and language therapists

PubMed Central

2018-01-01

Background Workforce factors present a significant barrier to the development of rehabilitation services for people with communication disabilities in sub-Saharan Africa (SSA). Exploring how the work of speech and language therapists (SLTs) in the region is organised and delivered can provide insight into existing services, areas for future workforce development and improved rehabilitation access for people with communication disability. Objectives This paper describes the employment and service provision patterns and work roles of a sample of SLTs in SSA. Method A broad, purpose-designed, mixed-methods survey was designed to collect data from SLTs living in Anglophone countries of SSA. Descriptive statistics and qualitative content analysis were undertaken. This paper reports on a subset of data from the wider survey. Results A description of the employment and work roles of the 33 respondents to the survey and characteristics of their service users is presented. SLTs were commonly employed within private and not-for-profit sectors and frequently worked in temporary jobs. SLTs engaged in a range of work roles, including capacity building and training others. Services were provided by SLTs across age ranges, health conditions and settings, with paediatric, urban services commonly reported. Costs for service users and urban-centred services give indications of barriers to service access. Conclusion Knowledge of the way in which speech and language therapy services are organised and provided has the potential to shape the development of communication disability rehabilitation in SSA. This research has identified a range of issues requiring consideration as the profession develops and grows. PMID:29707516

Barriers to Employment for Transition-age Youth with Developmental and Psychiatric Disabilities.

PubMed

Noel, Valerie A; Oulvey, Eugene; Drake, Robert E; Bond, Gary R

2017-05-01

Youth with developmental and psychiatric disabilities encounter significant vocational challenges, even when they receive supported employment services. We examined the barriers to employment for 280 transition-age youth with disabilities enrolled in supported employment in eight community rehabilitation centers. Employment team members identified each youth's top three barriers to employment using a 21-item checklist. Lack of work experience, transportation problems, and program engagement issues represented common barriers for both youth with developmental disabilities (53, 36, and 25%) and youth with psychiatric disabilities (20, 33, and 26%). Additional common barriers among youth with developmental disabilities included cognitive problems (32%) and lack of social skills (23%) and among youth with psychiatric disabilities included poor control of psychiatric symptoms (23%). Despite receiving evidence-based employment services, youth with disabilities encounter many barriers to employment. Awareness of typical barriers for transition-age youth, including those specific to different disability groups, may help employment programs anticipate challenges and develop strategies that avoid these barriers and their effects on employment opportunities.

Predicting conformational ensembles and genome-wide transcription factor binding sites from DNA sequences.

PubMed

Andrabi, Munazah; Hutchins, Andrew Paul; Miranda-Saavedra, Diego; Kono, Hidetoshi; Nussinov, Ruth; Mizuguchi, Kenji; Ahmad, Shandar

2017-06-22

DNA shape is emerging as an important determinant of transcription factor binding beyond just the DNA sequence. The only tool for large scale DNA shape estimates, DNAshape was derived from Monte-Carlo simulations and predicts four broad and static DNA shape features, Propeller twist, Helical twist, Minor groove width and Roll. The contributions of other shape features e.g. Shift, Slide and Opening cannot be evaluated using DNAshape. Here, we report a novel method DynaSeq, which predicts molecular dynamics-derived ensembles of a more exhaustive set of DNA shape features. We compared the DNAshape and DynaSeq predictions for the common features and applied both to predict the genome-wide binding sites of 1312 TFs available from protein interaction quantification (PIQ) data. The results indicate a good agreement between the two methods for the common shape features and point to advantages in using DynaSeq. Predictive models employing ensembles from individual conformational parameters revealed that base-pair opening - known to be important in strand separation - was the best predictor of transcription factor-binding sites (TFBS) followed by features employed by DNAshape. Of note, TFBS could be predicted not only from the features at the target motif sites, but also from those as far as 200 nucleotides away from the motif.

Intra-grain Common Pb Correction and Detrital Apatite U-Pb Dating via LA-ICPMS Depth Profiling

NASA Astrophysics Data System (ADS)

Boyd, P. D.; Galster, F.; Stockli, D. F.

2017-12-01

Apatite is a common accessory phase in igneous and sedimentary rocks. While apatite is widely employed as a low-temperature thermochronometric tool, it has been increasingly utilized to constrain moderate temperature cooling histories by U-Pb dating. Apatite U-Pb is characterized by a thermal sensitivity window of 375-550°C. This unique temperature window recorded by the apatite U-Pb system, and the near-ubiquitous presence of apatite in igneous and clastic sedimentary rocks makes it a powerful tool able to illuminate mid-crustal tectono-thermal processes. However, as apatite incorporates only modest amounts of U and Th (1-10s of ppm) the significant amounts of non-radiogenic "common" Pb incorporated during its formation presents a major hurdle for apatite U-Pb dating. In bedrock samples common Pb in apatite can be corrected for by the measurement of Pb in a cogenetic mineral phase, such as feldspar, that does not incorporate U or from determination of a common Pb composition from multiple analyses in Tera-Wasserburg space. While these methods for common Pb correction in apatite can work for igneous samples, they cannot be applied to detrital apatite in sedimentary rocks with variable common Pb compositions. The obstacle of common Pb in apatite has hindered the application of detrital apatite U-Pb dating in provenance studies, despite the fact that it would be a powerful tool. This study presents a new method for the in situ correction of common Pb in apatite through the utilization of novel LA-ICP-MS depth profiling, which can recover U-Pb ratios at micron-scale spatial resolution during ablation of a grain. Due to the intra-grain U variability in apatite, a mixing line for a single grain can be generated in Tera-Wasserburg Concordia space. As a case study, apatite from a Variscan alpine granite were analyzed using both the single and multi-grain method, with both methods giving identical results. As a second case study the intra-grain method was then performed on detrital apatite from the Swiss Northern Alpine Foreland Basin, where the common Pb composition and age spectra of detrital apatite grains were elucidated. The novel intra-grain apatite method enables the correction for common Pb in detrital apatite, making it feasible to incorporate detrital apatite U-Pb dating in provenance and source-to-sink studies.

Developing a Novel Parameter Estimation Method for Agent-Based Model in Immune System Simulation under the Framework of History Matching: A Case Study on Influenza A Virus Infection

PubMed Central

Li, Tingting; Cheng, Zhengguo; Zhang, Le

2017-01-01

Since they can provide a natural and flexible description of nonlinear dynamic behavior of complex system, Agent-based models (ABM) have been commonly used for immune system simulation. However, it is crucial for ABM to obtain an appropriate estimation for the key parameters of the model by incorporating experimental data. In this paper, a systematic procedure for immune system simulation by integrating the ABM and regression method under the framework of history matching is developed. A novel parameter estimation method by incorporating the experiment data for the simulator ABM during the procedure is proposed. First, we employ ABM as simulator to simulate the immune system. Then, the dimension-reduced type generalized additive model (GAM) is employed to train a statistical regression model by using the input and output data of ABM and play a role as an emulator during history matching. Next, we reduce the input space of parameters by introducing an implausible measure to discard the implausible input values. At last, the estimation of model parameters is obtained using the particle swarm optimization algorithm (PSO) by fitting the experiment data among the non-implausible input values. The real Influeza A Virus (IAV) data set is employed to demonstrate the performance of our proposed method, and the results show that the proposed method not only has good fitting and predicting accuracy, but it also owns favorable computational efficiency. PMID:29194393

Developing a Novel Parameter Estimation Method for Agent-Based Model in Immune System Simulation under the Framework of History Matching: A Case Study on Influenza A Virus Infection.

PubMed

Li, Tingting; Cheng, Zhengguo; Zhang, Le

2017-12-01

Since they can provide a natural and flexible description of nonlinear dynamic behavior of complex system, Agent-based models (ABM) have been commonly used for immune system simulation. However, it is crucial for ABM to obtain an appropriate estimation for the key parameters of the model by incorporating experimental data. In this paper, a systematic procedure for immune system simulation by integrating the ABM and regression method under the framework of history matching is developed. A novel parameter estimation method by incorporating the experiment data for the simulator ABM during the procedure is proposed. First, we employ ABM as simulator to simulate the immune system. Then, the dimension-reduced type generalized additive model (GAM) is employed to train a statistical regression model by using the input and output data of ABM and play a role as an emulator during history matching. Next, we reduce the input space of parameters by introducing an implausible measure to discard the implausible input values. At last, the estimation of model parameters is obtained using the particle swarm optimization algorithm (PSO) by fitting the experiment data among the non-implausible input values. The real Influeza A Virus (IAV) data set is employed to demonstrate the performance of our proposed method, and the results show that the proposed method not only has good fitting and predicting accuracy, but it also owns favorable computational efficiency.

Geometrical comparison of two protein structures using Wigner-D functions.

PubMed

Saberi Fathi, S M; White, Diana T; Tuszynski, Jack A

2014-10-01

In this article, we develop a quantitative comparison method for two arbitrary protein structures. This method uses a root-mean-square deviation characterization and employs a series expansion of the protein's shape function in terms of the Wigner-D functions to define a new criterion, which is called a "similarity value." We further demonstrate that the expansion coefficients for the shape function obtained with the help of the Wigner-D functions correspond to structure factors. Our method addresses the common problem of comparing two proteins with different numbers of atoms. We illustrate it with a worked example. © 2014 Wiley Periodicals, Inc.

Apollo/Skylab suit program management systems study. Volume 2: Cost analysis

NASA Technical Reports Server (NTRS)

1974-01-01

The business management methods employed in the performance of the Apollo-Skylab Suit Program are studied. The data accumulated over the span of the contract as well as the methods used to accumulate the data are examined. Management methods associated with the monitoring and control of resources applied towards the performance of the contract are also studied and recommended upon. The primary objective is the compilation, analysis, and presentation of historical cost performance criteria. Cost data are depicted for all phases of the Apollo-Skylab program in common, meaningful terms, whereby the data may be applicable to future suit program planning efforts.

Multiparametric MRI of Prostate Cancer: An Update on State-of-the-Art Techniques and Their Performance in Detecting and Localizing Prostate Cancer

PubMed Central

Hegde, John V.; Mulkern, Robert V.; Panych, Lawrence P.; Fennessy, Fiona M.; Fedorov, Andriy; Maier, Stephan E.; Tempany, Clare M.C.

2013-01-01

Magnetic resonance (MR) examinations of men with prostate cancer are most commonly performed for detecting, characterizing, and staging the extent of disease to best determine diagnostic or treatment strategies, which range from biopsy guidance to active surveillance to radical prostatectomy. Given both the exam's importance to individual treatment plans and the time constraints present for its operation at most institutions, it is essential to perform the study effectively and efficiently. This article reviews the most commonly employed modern techniques for prostate cancer MR examinations, exploring the relevant signal characteristics from the different methods discussed and relating them to intrinsic prostate tissue properties. Also, a review of recent articles using these methods to enhance clinical interpretation and assess clinical performance is provided. PMID:23606141

Assessing trail conditions in protected areas: Application of a problem-assessment method in Great Smoky Mountains National Park, USA

USGS Publications Warehouse

Leung, Y.-F.; Marion, J.

1999-01-01

The degradation of trail resources associated with expanding recreation and tourism visitation is a growing management problem in protected areas worldwide. In order to make judicious trail and visitor management decisions, protected area managers need objective and timely information on trail resource conditions. This paper introduces a trail survey method that efficiently characterizes the lineal extent of common trail problems. The method was applied to a large sample of trails within Great Smoky Mountains National Park, a highuse protected area in the USA. The Trail ProblemAssessment Method (TPAM) employs a continuous search for multiple indicators of predefined tread problems, yielding census data documenting the location, occurrence and extent of each problem. The present application employed 23 different indicators in three categories to gather inventory, resource condition, and design and maintenance data of each surveyed trail. Seventy-two backcountry hiking trails (528 km), or 35% of the Park's total trail length, were surveyed. Soil erosion and wet soil were found to be the two most common impacts on a lineal extent basis. Trails with serious tread problems were well distributed throughout the Park, although wet muddy treads tended to be concentrated in areas where horse use was high. The effectiveness of maintenance features installed to divert water from trail treads was also evaluated. Water bars were found to be more effective than drainage dips. The TPAM was able to provide Park managers with objective and quantitative information for use in trail planning, management and maintenance decisions, and is applicable to other protected areas elsewhere with different environmental and impact characteristics.

The influence of common method bias on the relationship of the socio-ecological model in predicting physical activity behavior.

PubMed

Wingate, Savanna; Sng, Eveleen; Loprinzi, Paul D

2018-01-01

Background: The purpose of this study was to evaluate the extent, if any, that the association between socio-ecological parameters and physical activity may be influenced by common method bias (CMB). Methods: This study took place between February and May of 2017 at a Southeastern University in the United States. A randomized controlled experiment was employed among 119 young adults.Participants were randomized into either group 1 (the group we attempted to minimize CMB)or group 2 (control group). In group 1, CMB was minimized via various procedural remedies,such as separating the measurement of predictor and criterion variables by introducing a time lag (temporal; 2 visits several days apart), creating a cover story (psychological), and approximating measures to have data collected in different media (computer-based vs. paper and pencil) and different locations to control method variance when collecting self-report measures from the same source. Socio-ecological parameters (self-efficacy; friend support; family support)and physical activity were self-reported. Results: Exercise self-efficacy was significantly associated with physical activity. This association (β = 0.74, 95% CI: 0.33-1.1; P = 0.001) was only observed in group 2 (control), but not in group 1 (experimental group) (β = 0.03; 95% CI: -0.57-0.63; P = 0.91). The difference in these coefficients (i.e., β = 0.74 vs. β = 0.03) was statistically significant (P = 0.04). Conclusion: Future research in this field, when feasible, may wish to consider employing procedural and statistical remedies to minimize CMB.

The influence of common method bias on the relationship of the socio-ecological model in predicting physical activity behavior

PubMed Central

Wingate, Savanna; Sng, Eveleen; Loprinzi, Paul D.

2018-01-01

Background: The purpose of this study was to evaluate the extent, if any, that the association between socio-ecological parameters and physical activity may be influenced by common method bias (CMB). Methods: This study took place between February and May of 2017 at a Southeastern University in the United States. A randomized controlled experiment was employed among 119 young adults.Participants were randomized into either group 1 (the group we attempted to minimize CMB)or group 2 (control group). In group 1, CMB was minimized via various procedural remedies,such as separating the measurement of predictor and criterion variables by introducing a time lag (temporal; 2 visits several days apart), creating a cover story (psychological), and approximating measures to have data collected in different media (computer-based vs. paper and pencil) and different locations to control method variance when collecting self-report measures from the same source. Socio-ecological parameters (self-efficacy; friend support; family support)and physical activity were self-reported. Results: Exercise self-efficacy was significantly associated with physical activity. This association (β = 0.74, 95% CI: 0.33-1.1; P = 0.001) was only observed in group 2 (control), but not in group 1 (experimental group) (β = 0.03; 95% CI: -0.57-0.63; P = 0.91). The difference in these coefficients (i.e., β = 0.74 vs. β = 0.03) was statistically significant (P = 0.04). Conclusion: Future research in this field, when feasible, may wish to consider employing procedural and statistical remedies to minimize CMB. PMID:29423361

Small Group Employer Participation in New Mexico's State Coverage Insurance Program: Lessons for Federal Reform

PubMed Central

Sommers, Anna S; Abraham, Jean Marie; Spicer, Laura; Mikow, Asher; Spaulding-Bynon, Mari

2011-01-01

Objective To identify factors associated with small group employer participation in New Mexico's State Coverage Insurance (SCI) program. Data Sources Telephone surveys of employers participating in SCI (N=269) and small employers who inquired about SCI (N=148) were fielded September 2008–January 2009. Study Design Descriptive and multivariate analyses investigated differences between employer samples, including employer characteristics, concerns that applied to the business when deciding whether to participate in SCI, prior offerings of insurance to workers, and perceived affordability of the program. Data Collection/Extraction Methods Unweighted employer samples yielded 88 and 75 percent response rates for the participating and inquiring employers, respectively. Principal Findings The administrative issue most commonly selected by inquiring employers as applying to their business was difficulty understanding how eligibility requirements applied to their business and its employees (53.5 percent). Inquiring businesses were significantly more likely to report concern about affording to pay the premiums in the first month (35.6 versus 18.7 percent) and the cost to the business over the long run (46.5 versus 26.6 percent) relative to participating employers. From the model results, businesses with the fewest full-time employees (zero to two) were 19 percentage points less likely to participate relative to businesses with six or more full-time employees. Conclusions Administrative and cost barriers to participation in SCI reported by employers suggest that the tax credit offered to small businesses under new federal provisions, which merely offsets the employer portion of premium, could be more effective if accompanied by additional supports to businesses. PMID:21143477

It’s All of the Above: Benefits of Working for Individuals with Spinal Cord Injury

PubMed Central

Reed, Karla S.; Saunders, Lee L.; Krause, James S.

2015-01-01

Background: The majority of research on employment among persons with spinal cord injury (SCI) focuses on the employment rate at a given point in time to the exclusion of quality employment outcomes. Objective: To identify the employment outcomes of greatest importance as defined by those with SCI who have worked since injury. Methods: A qualitative approach was used with 6 focus groups at 2 sites (Minnesota and Georgia). Participants (N = 44) were a minimum of 10 years after injury and had been employed at some point after SCI. We identified participants through a 40-year longitudinal study of SCI and a community resource. A combination of homogeneous (race/ethnic minority group, female group) and heterogeneous groups were convened. A semi-structured interview format queried participants about personal, environmental, and policy-related factors that impacted obtaining, maintaining, and advancing in employment. Results: Seven overlapping themes were identified under the 2 broad categories of compensation and subjective well-being: (1) salary and what it can support, (2) health insurance and other fringe benefits, (3) promotions and recognition, (4) social connection and support, (5) job satisfaction and enjoyment from working, (6) making a difference and helping others, and (7) psychological and emotional health. Conclusion: The results indicate several common themes among persons with SCI who have successful employment histories, suggesting that the benefits of employment are multifaceted and go beyond monetary compensation. PMID:25762855

Effectiveness of Individual Placement and Support Supported Employment for Young Adults

PubMed Central

Bond, Gary R.; Drake, Robert E.; Campbell, Kikuko

2015-01-01

Objective The Individual Placement and Support (IPS) model of supported employment was first developed in community mental health centers for adults with severe mental illness. While IPS is an established evidence-based practice in this broad population, evidence on its effectiveness focused specifically on young adults has been limited. The current study aimed to address this gap. Methods To investigate the effects of IPS on young adults, the authors conducted a secondary analysis on a pooled sample of 109 unemployed young adults (under age 30) from four randomized controlled trials employing a common research protocol that included a standardized measurement battery and rigorous fidelity monitoring. Researchers assessed these participants over 18 months on nine competitive employment outcome measures. Results On all measures the IPS group had significantly better employment outcomes. Overall, 40 (82%) of IPS participants obtained employment during follow-up compared to 25 (42%) of control participants, Χ2 =17.9, p < .001. IPS participants averaged 25.0 weeks of employment, compared to 7.0 weeks for control participants, t = 4.50, p < .001. Conclusions The current analysis supports a small number of previous studies in showing that IPS is highly effective in helping young adults to attain competitive employment. When young adults acquire competitive jobs and initiate a path toward normal adult roles, they may avoid the cycle of disability and psychiatric patient roles that are demeaning and demoralizing. PMID:25138195

Influence of productivity and processing method on physicochemical characteristics of white button mushrooms in Brazil.

PubMed

Zied, Diego Cunha; Penachio, Sara Maciel; Dias, Eustáquio Souza; de Almeida Minhoni, Marli Teixeira; Ferraz, Rafael Augusto; Vieites, Rogério Lopes

2014-11-01

The white button mushroom is the edible fungus most commonly cultivated and commercialized in Brazil and worldwide. This work assesses the productivity of the different strains ABI 07/06 and ABI 06/05 of Agaricus bisporus grown under the conditions normally employed by growers in the southeast of Brazil, and the influence of four different chemical conservation methods on the physicochemical characteristics and storage properties of the fruit bodies. The productivities of strains ABI 07/06 and ABI 06/05 of white button mushrooms were found to be comparable. The colorimetric characteristics and chemical compositions (fat, fiber and protein contents) of the mushroom strains were similar, and these parameters were not influenced significantly by the conservation processes. Texture was negatively affected by all processing methods employed. It was concluded that chemical methods of processing mushrooms were not fully effective and novel alternative technologies should be considered by mushroom processors in Brazil. Some methods of mushroom storage using chemicals such as sodium metabisulfite are harmful to the human organism, so processing using autoclaving may be the best form of conservation of canned mushrooms. © 2014 Society of Chemical Industry.

Comparative quantification of dietary supplemented neural creatine concentrations with (1)H-MRS peak fitting and basis spectrum methods.

PubMed

Turner, Clare E; Russell, Bruce R; Gant, Nicholas

2015-11-01

Magnetic resonance spectroscopy (MRS) is an analytical procedure that can be used to non-invasively measure the concentration of a range of neural metabolites. Creatine is an important neurometabolite with dietary supplementation offering therapeutic potential for neurological disorders with dysfunctional energetic processes. Neural creatine concentrations can be probed using proton MRS and quantified using a range of software packages based on different analytical methods. This experiment examines the differences in quantification performance of two commonly used analysis packages following a creatine supplementation strategy with potential therapeutic application. Human participants followed a seven day dietary supplementation regime in a placebo-controlled, cross-over design interspersed with a five week wash-out period. Spectroscopy data were acquired the day immediately following supplementation and analyzed with two commonly-used software packages which employ vastly different quantification methods. Results demonstrate that neural creatine concentration was augmented following creatine supplementation when analyzed using the peak fitting method of quantification (105.9%±10.1). In contrast, no change in neural creatine levels were detected with supplementation when analysis was conducted using the basis spectrum method of quantification (102.6%±8.6). Results suggest that software packages that employ the peak fitting procedure for spectral quantification are possibly more sensitive to subtle changes in neural creatine concentrations. The relative simplicity of the spectroscopy sequence and the data analysis procedure suggest that peak fitting procedures may be the most effective means of metabolite quantification when detection of subtle alterations in neural metabolites is necessary. The straightforward technique can be used on a clinical magnetic resonance imaging system. Copyright © 2015 Elsevier Inc. All rights reserved.

"This Is Still a Work in Progress": Common Ground, Littleton, New Hampshire.

ERIC Educational Resources Information Center

Hall, Mair; Walker, Pam

This site-visit report describes Common Ground, a program located in New Hampshire that supports 52 people with developmental disabilities, including some with severe and multiple impairments, in a broad range of individualized, integrated daytime activities, including supported and competitive employment, self-employment, volunteer work, and the…

Current practice trends in allergy: results of a united states survey of otolaryngologists, allergist-immunologists, and primary care physicians.

PubMed

Ryan, Matthew W; Marple, Bradley F; Leatherman, Bryan; Mims, J Whit; Fornadley, John; Veling, Maria; Lin, Sandra Y

2014-10-01

Clinical practices for the diagnosis and treatment of allergic disease evolve over time in response to a variety of forces. The techniques used by various physician specialties are not clearly defined and may vary from published descriptions or recommendations in the literature. This work is a Web-based survey enrolling 250 U.S. physicians in the following specialties: otolaryngology (ENT), allergy-immunology (A/I), and primary care (PCP). Respondents reported that skin-prick testing is the most common diagnostic testing method, followed by in vitro specific immunoglobulin E (IgE) testing. ENTs were more likely to use intradermal testing compared to other specialties (p = 0.0003 vs A/I; p < 0.0001 vs PCP). Respondents reported a wide distribution in number of allergens tested, regardless of testing method (range, 11 to >60). Significant use of home immunotherapy injections (defined as >10% of immunotherapy patients) ranged from 27% to 36% of physicians, with no statistically significant difference noted based upon specialty. PCPs reported greater use of sublingual immunotherapy (PCP, 68%; A/I, 45%; otolaryngology, 35%; A/I vs PCP, p = 0.005; ENT vs PCP p < 0.001)). A variety of allergy testing and treatment methods are employed by U.S. physicians, with some differences noted based upon specialty. Home immunotherapy continues to be employed in allergy practices, and sublingual immunotherapy is a common form of delivery, especially in primary care practices. © 2014 ARS-AAOA, LLC.

Rapid diagnosis of common deletional α-thalassemia in the Chinese population by qPCR based on identical primer homologous fragments.

PubMed

Long, Ju

2016-05-01

In China, -(SEA), -α(3.7) and -α(4.2) are common deletional α-thalassemia alleles. Gap-PCR is the currently used detection method for these alleles, whose disadvantages include time-consuming procedure and increased potential for PCR product contamination. Therefore, this detection method needs to be improved. Based on identical-primer homologous fragments, a qPCR system was developed for deletional α-thalassemia genotyping, which was composed of a group of quantitatively-related primers and their corresponding probes plus two groups of qualitatively-related primers and their corresponding probes. In order to verify the accuracy of the qPCR system, known genotype samples and random samples are employed. The standard curve result demonstrated that designed primers and probes all yielded good amplification efficiency. In the tests of known genotype samples and random samples, sample detection results were consistent with verification results. In detecting αα, -(SEA), -α(3.7) and -α(4.2) alleles, deletional α-thalassemia alleles are accurately detected by this method. In addition, this method is provided with a wider detection range, greater speed and reduced PCR product contamination risk when compared with current common gap-PCR detection reagents. Copyright © 2016 Elsevier B.V. All rights reserved.

A Fully Customized Baseline Removal Framework for Spectroscopic Applications.

PubMed

Giguere, Stephen; Boucher, Thomas; Carey, C J; Mahadevan, Sridhar; Dyar, M Darby

2017-07-01

The task of proper baseline or continuum removal is common to nearly all types of spectroscopy. Its goal is to remove any portion of a signal that is irrelevant to features of interest while preserving any predictive information. Despite the importance of baseline removal, median or guessed default parameters are commonly employed, often using commercially available software supplied with instruments. Several published baseline removal algorithms have been shown to be useful for particular spectroscopic applications but their generalizability is ambiguous. The new Custom Baseline Removal (Custom BLR) method presented here generalizes the problem of baseline removal by combining operations from previously proposed methods to synthesize new correction algorithms. It creates novel methods for each technique, application, and training set, discovering new algorithms that maximize the predictive accuracy of the resulting spectroscopic models. In most cases, these learned methods either match or improve on the performance of the best alternative. Examples of these advantages are shown for three different scenarios: quantification of components in near-infrared spectra of corn and laser-induced breakdown spectroscopy data of rocks, and classification/matching of minerals using Raman spectroscopy. Software to implement this optimization is available from the authors. By removing subjectivity from this commonly encountered task, Custom BLR is a significant step toward completely automatic and general baseline removal in spectroscopic and other applications.

Use of the psbA-trnH region to authenticate medicinal species of Fabaceae.

PubMed

Gao, Ting; Ma, Xinye; Zhu, Xunzhi

2013-01-01

Fabaceae is a huge family that contains a large number of medicinal plants, many of which are commonly used in Chinese traditional medicine. However, traditional taxonomy has not been able to meet the complicated demands of species discrimination within Fabaceae. Thus, we employed a famous DNA barcode, the psbA-trnH region, to discriminate commonly used medicinal species of the family Fabaceae. Here, the psbA-trnH regions derived from 152 samples were amplified. These samples represented 104 Fabaceae medicinal species from 60 genera, including 25 authentic Fabaceae species listed in the Chinese pharmacopoeia and common adulterant species. The results indicate that the psbA-trnH region performed well in terms of its universality and high variability in length and composition. Species discriminative power analysis of the psbA-trnH region showed that 91.3% of species could be identified successfully by the BLAST1 method in conjunction with the nearest distance method. And, the species resolution rate of the TaxonGap method exceeded 93%. The results provide support for the use of the psbA-trnH plastid region as a sensitive marker to the authentication of Fabaceae medicinal plants.

Plume radiation

NASA Astrophysics Data System (ADS)

Dirscherl, R.

1993-06-01

The electromagnetic radiation originating from the exhaust plume of tactical missile motors is of outstanding importance for military system designers. Both missile- and countermeasure engineer rely on the knowledge of plume radiation properties, be it for guidance/interference control or for passive detection of adversary missiles. To allow access to plume radiation properties, they are characterized with respect to the radiation producing mechanisms like afterburning, its chemical constituents, and reactions as well as particle radiation. A classification of plume spectral emissivity regions is given due to the constraints imposed by available sensor technology and atmospheric propagation windows. Additionally assessment methods are presented that allow a common and general grouping of rocket motor properties into various categories. These methods describe state of the art experimental evaluation techniques as well as calculation codes that are most commonly used by developers of NATO countries. Dominant aspects influencing plume radiation are discussed and a standardized test technique is proposed for the assessment of plume radiation properties that include prediction procedures. These recommendations on terminology and assessment methods should be common to all employers of plume radiation. Special emphasis is put on the omnipresent need for self-protection by the passive detection of plume radiation in the ultraviolet (UV) and infrared (IR) spectral band.

A systematic review of the quality of statistical methods employed for analysing quality of life data in cancer randomised controlled trials.

PubMed

Hamel, Jean-Francois; Saulnier, Patrick; Pe, Madeline; Zikos, Efstathios; Musoro, Jammbe; Coens, Corneel; Bottomley, Andrew

2017-09-01

Over the last decades, Health-related Quality of Life (HRQoL) end-points have become an important outcome of the randomised controlled trials (RCTs). HRQoL methodology in RCTs has improved following international consensus recommendations. However, no international recommendations exist concerning the statistical analysis of such data. The aim of our study was to identify and characterise the quality of the statistical methods commonly used for analysing HRQoL data in cancer RCTs. Building on our recently published systematic review, we analysed a total of 33 published RCTs studying the HRQoL methods reported in RCTs since 1991. We focussed on the ability of the methods to deal with the three major problems commonly encountered when analysing HRQoL data: their multidimensional and longitudinal structure and the commonly high rate of missing data. All studies reported HRQoL being assessed repeatedly over time for a period ranging from 2 to 36 months. Missing data were common, with compliance rates ranging from 45% to 90%. From the 33 studies considered, 12 different statistical methods were identified. Twenty-nine studies analysed each of the questionnaire sub-dimensions without type I error adjustment. Thirteen studies repeated the HRQoL analysis at each assessment time again without type I error adjustment. Only 8 studies used methods suitable for repeated measurements. Our findings show a lack of consistency in statistical methods for analysing HRQoL data. Problems related to multiple comparisons were rarely considered leading to a high risk of false positive results. It is therefore critical that international recommendations for improving such statistical practices are developed. Copyright © 2017. Published by Elsevier Ltd.

Cancer Localization in the Prostate with F-18 Fluorocholine Positron Emission Tomography

DTIC Science & Technology

2007-01-01

INTRODUCTION Prostate cancer is the second leading cause of cancer death in American men over 50 years of age. Ultrasound - guided prostate biopsy is...currently the most common method for diagnosing and localizing cancer in the prostate. However, even when standard 6 or 12 needle biopsy templates... needles employed (1, 2). While progress has been made in the detection of primary prostate cancer using imaging techniques such as ultrasound and

Quantum computation with trapped ions in an optical cavity.

PubMed

Pachos, Jiannis; Walther, Herbert

2002-10-28

Two-qubit logical gates are proposed on the basis of two atoms trapped in a cavity setup and commonly addressed by laser fields. Losses in the interaction by spontaneous transitions are efficiently suppressed by employing adiabatic transitions and the quantum Zeno effect. Dynamical and geometrical conditional phase gates are suggested. This method provides fidelity and a success rate of its gates very close to unity. Hence, it is suitable for performing quantum computation.

Two Paradoxes in Linear Regression Analysis.

PubMed

Feng, Ge; Peng, Jing; Tu, Dongke; Zheng, Julia Z; Feng, Changyong

2016-12-25

Regression is one of the favorite tools in applied statistics. However, misuse and misinterpretation of results from regression analysis are common in biomedical research. In this paper we use statistical theory and simulation studies to clarify some paradoxes around this popular statistical method. In particular, we show that a widely used model selection procedure employed in many publications in top medical journals is wrong. Formal procedures based on solid statistical theory should be used in model selection.

Supported employment for persons with serious mental illness: current status and future directions.

PubMed

Mueser, K T; McGurk, S R

2014-06-01

The individual placement and supported (IPS) model of supported employment is the most empirically validated model of vocational rehabilitation for persons with schizophrenia or another serious mental illness. Over 18 randomized controlled trials have been conducted throughout the world demonstrating the effectiveness of supported employment at improving competitive work compared to other vocational programs: IPS supported employment is defined by the following principles: 1) inclusion of all clients who want to work; 2) integration of vocational and clinical services; 3) focus on competitive employment; 4) rapid job search and no required prevocational skills training; 5) job development by the employment specialist; 6) attention to client preferences about desired work and disclosure of mental illness to prospective employers; 7) benefits counseling; and 8) follow-along supports after a job is obtained. Supported employment has been successfully implemented in a wide range of cultural and clinical populations, although challenges to implementation are also encountered. Common challenges are related to problems such as the failure to access technical assistance, system issues, negative beliefs and attitudes of providers, funding restrictions, and poor leadership. These challenges can be overcome by tapping expertise in IPS supported employment, including standardized and tested models of training and consultation. Efforts are underway to increase the efficiency of training methods for supported employment and the overall program, and to improve its effectiveness for those clients who do not benefit. Progress in IPS supported employment offers people with a serious mental illness realistic hope for achieving their work goals, and taking greater control over their lives. Copyright © 2014. Published by Elsevier Masson SAS.

Method for Selective Cleaning of Mold Release from Composite Honeycomb Surfaces

NASA Technical Reports Server (NTRS)

Pugel, Diane

2011-01-01

Honeycomb structures are commonly employed as load- and force-bearing structures as they are structurally strong and lightweight. Manufacturing processes for heat-molded composite honeycomb structures commence with the placement of pre-impregnated composite layups over metal mandrels. To prevent permanent bonding between the composite layup and the metal mandrels, an agent, known as a mold release agent, is used. Mold release agents allow the molded composite material to be removed from mandrels after a heat-forming process. Without a specific removal process, mold release agents may continue to adhere to the surface of the composite material, thereby affecting the bonding of other materials that may come into contact with the composite surface in later stages of processing A constituent common to commercially available household cleaning agents is employed for the removal of mold release agents common to the manufacturing of heat-formed composite materials. The reliability of the solvent has been proven by the longevity and reliability of commercial household cleaners. At the time of this reporting, no one has attempted using constituent for this purpose. The material to be cleaned is immersed in the solution, vertically removed so that the solution is allowed to drain along cell walls and into a solvent bath, and then placed on a compressed airflow table for drying.

A 2-step penalized regression method for family-based next-generation sequencing association studies.

PubMed

Ding, Xiuhua; Su, Shaoyong; Nandakumar, Kannabiran; Wang, Xiaoling; Fardo, David W

2014-01-01

Large-scale genetic studies are often composed of related participants, and utilizing familial relationships can be cumbersome and computationally challenging. We present an approach to efficiently handle sequencing data from complex pedigrees that incorporates information from rare variants as well as common variants. Our method employs a 2-step procedure that sequentially regresses out correlation from familial relatedness and then uses the resulting phenotypic residuals in a penalized regression framework to test for associations with variants within genetic units. The operating characteristics of this approach are detailed using simulation data based on a large, multigenerational cohort.

Optical monitoring of scoliosis by 3D medical laser scanner

NASA Astrophysics Data System (ADS)

Rodríguez-Quiñonez, Julio C.; Sergiyenko, Oleg Yu.; Preciado, Luis C. Basaca; Tyrsa, Vera V.; Gurko, Alexander G.; Podrygalo, Mikhail A.; Lopez, Moises Rivas; Balbuena, Daniel Hernandez

2014-03-01

Three dimensional recording of the human body surface or anatomical areas have gained importance in many medical applications. In this paper, our 3D Medical Laser Scanner is presented. It is based on the novel principle of dynamic triangulation. We analyze the method of operation, medical applications, orthopedically diseases as Scoliosis and the most common types of skin to employ the system the most proper way. It is analyzed a group of medical problems related to the application of optical scanning in optimal way. Finally, experiments are conducted to verify the performance of the proposed system and its method uncertainty.

Health and social support services to HIV/AIDS infected individuals in Tanzania: employees and employers perceptions

PubMed Central

2014-01-01

Background HIV is a major public health problem in the world, especially in sub-Saharan Africa. It often leads to loss of productive labour and disruption of existing social support system which results in deterioration of population health. This poses a great challenge to infected people in meeting their essential goods and services. This paper examines health and social support services provided by employers to HIV/AIDS infected employees in Tanzania. Methods This was a cross-sectional study, which employed qualitative and quantitative methods in data collection and analysis. Structured questionnaires and in-depth interviews were used to assess the health and social support services provision at employers and employees perspectives. The study participants were employees and employers from public and private organizations. Results A total of 181 employees and 23 employers from 23 workplaces aged between 18–68 years were involved. The results show that 23.8% (i.e., 20.4% males and 27.3% females) of the employees had at least one member of the family or close relatives living with HIV at the time of the study. Fifty six percent of the infected employees reported to have been receiving health or social support from their employers. Employees’ responses were consistent with those reported by their employers. A total of 12(52.2%) and 11(47.8%) employers reported to have been providing health and social supports respectively. Female employees (58.3%) from the private sector (60.0%) were more likely to receive supports than male employees (52.6%) and than those from the public sector (46.2%). The most common health and social support received by the employees were treatment, and nutritional support and reduction of workload, respectively. Conclusions HIV/AIDS infected employees named treatment and nutritional support, and soft loans and reduced workload respectively, as the most important health and social supports they needed from their employers. This study provides baseline information for further studies on provision of health and social support services by employers to HIV/AIDS infected employees in the context of a developing economy like Tanzania. PMID:24950701

20 CFR 404.1058 - Special situations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Wages § 404.1058 Special situations. (a... as a home worker in a common-law employment relationship (see § 404.1007) count as wages regardless...

20 CFR 404.1058 - Special situations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Wages § 404.1058 Special situations. (a... as a home worker in a common-law employment relationship (see § 404.1007) count as wages regardless...

20 CFR 404.1058 - Special situations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Wages § 404.1058 Special situations. (a... as a home worker in a common-law employment relationship (see § 404.1007) count as wages regardless...

20 CFR 404.1058 - Special situations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Wages § 404.1058 Special situations. (a... as a home worker in a common-law employment relationship (see § 404.1007) count as wages regardless...

Assessing the Contribution of Unstable Employment to Mortality in Posttransition Russia: Prospective Individual-Level Analyses From the Russian Longitudinal Monitoring Survey

PubMed Central

Bobak, Martin

2009-01-01

Objectives. We used the Russia Longitudinal Monitoring Survey (RLMS) to investigate associations between employment, socioeconomic position, and mortality. Methods. Data were from working-age respondents in 8 rounds (1994–2003) of the RLMS. We measured associations between education, occupation, unemployment, and insecure employment and mortality with Cox proportional hazards analyses. Results. Of 4465 men and 4158 women who were currently employed, 251 men and 34 women died. A third of employed respondents experienced wage arrears, and 10% experienced compulsory leave and payment in consumer goods. Insecure employment, more common among the less-educated and manual workers, fluctuated with macroeconomic measures. Mortality was significantly associated with payment in consumer goods among men (hazard ratio [HR] = 1.46; 95% confidence interval [CI] = 1.03, 2.07), compulsory unpaid leave among women (HR = 3.79; 95% CI = 1.82, 7.88), and male unemployment (HR = 1.88; 95% CI = 1.38, 2.55). Associations with death within 1 year of entry were generally somewhat stronger than the association with mortality over the whole study period. Conclusions. Unemployment and job insecurity predicted mortality, suggesting that they contributed to Russia's high mortality during the transition from communism. PMID:19696378

Predictive Sampling of Rare Conformational Events in Aqueous Solution: Designing a Generalized Orthogonal Space Tempering Method.

PubMed

Lu, Chao; Li, Xubin; Wu, Dongsheng; Zheng, Lianqing; Yang, Wei

2016-01-12

In aqueous solution, solute conformational transitions are governed by intimate interplays of the fluctuations of solute-solute, solute-water, and water-water interactions. To promote molecular fluctuations to enhance sampling of essential conformational changes, a common strategy is to construct an expanded Hamiltonian through a series of Hamiltonian perturbations and thereby broaden the distribution of certain interactions of focus. Due to a lack of active sampling of configuration response to Hamiltonian transitions, it is challenging for common expanded Hamiltonian methods to robustly explore solvent mediated rare conformational events. The orthogonal space sampling (OSS) scheme, as exemplified by the orthogonal space random walk and orthogonal space tempering methods, provides a general framework for synchronous acceleration of slow configuration responses. To more effectively sample conformational transitions in aqueous solution, in this work, we devised a generalized orthogonal space tempering (gOST) algorithm. Specifically, in the Hamiltonian perturbation part, a solvent-accessible-surface-area-dependent term is introduced to implicitly perturb near-solute water-water fluctuations; more importantly in the orthogonal space response part, the generalized force order parameter is generalized as a two-dimension order parameter set, in which essential solute-solvent and solute-solute components are separately treated. The gOST algorithm is evaluated through a molecular dynamics simulation study on the explicitly solvated deca-alanine (Ala10) peptide. On the basis of a fully automated sampling protocol, the gOST simulation enabled repetitive folding and unfolding of the solvated peptide within a single continuous trajectory and allowed for detailed constructions of Ala10 folding/unfolding free energy surfaces. The gOST result reveals that solvent cooperative fluctuations play a pivotal role in Ala10 folding/unfolding transitions. In addition, our assessment analysis suggests that because essential conformational events are mainly driven by the compensating fluctuations of essential solute-solvent and solute-solute interactions, commonly employed "predictive" sampling methods are unlikely to be effective on this seemingly "simple" system. The gOST development presented in this paper illustrates how to employ the OSS scheme for physics-based sampling method designs.

Electrodeposition of Polymer Nanostructures using Three Diffuse Double Layers: Polymerization beyond the Liquid/Liquid Interfaces

NASA Astrophysics Data System (ADS)

Divya, Velpula; Sangaranarayanan, M. V.

2018-04-01

Nanostructured conducting polymers have received immense attention during the past few decades on account of their phenomenal usefulness in diverse contexts, while the interface between two immiscible liquids is of great interest in chemical and biological applications. Here we propose a novel Electrode(solid)/Electrolyte(aqueous)/Electrolyte(organic) Interfacial assembly for the synthesis of polymeric nanostructures using a novel concept of three diffuse double layers. There exist remarkable differences between the morphologies of the polymers synthesized using the conventional electrode/electrolyte method and that of the new approach. In contrast to the commonly employed electrodeposition at liquid/liquid interfaces, these polymer modified electrodes can be directly employed in diverse applications such as sensors, supercapacitors etc.

AN ASSESSMENT OF SUNSPOT NUMBER DATA COMPOSITES OVER 1845–2014

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lockwood, M.; Owens, M. J.; Barnard, L.

2016-06-10

New sunspot data composites, some of which are radically different in the character of their long-term variation, are evaluated over the interval 1845–2014. The method commonly used to calibrate historic sunspot data, relative to modern-day data, is “daisy-chaining,” whereby calibration is passed from one data subset to the neighboring one, usually using regressions of the data subsets for the intervals of their overlap. Recent studies have illustrated serious pitfalls in these regressions, and the resulting errors can be compounded by their repeated use as the data sequence is extended back in time. Hence, the recent composite data series by Usoskinmore » et al., R {sub UEA}, is a very important advance because it avoids regressions, daisy-chaining, and other common, but invalid, assumptions: this is achieved by comparing the statistics of “active-day” fractions to those for a single reference data set. We study six sunspot data series, including R {sub UEA} and the new “backbone” data series ( R {sub BB}, recently generated by Svalgaard and Schatten by employing both regression and daisy-chaining). We show that all six can be used with a continuity model to reproduce the main features of the open solar flux variation for 1845–2014, as reconstructed from geomagnetic activity data. However, some differences can be identified that are consistent with tests using a basket of other proxies for solar magnetic fields. Using data from a variety of sunspot observers, we illustrate problems with the method employed in generating R {sub BB} that cause it to increasingly overestimate sunspot numbers going back in time, and we recommend using R {sub UEA} because it employs more robust procedures that avoid such problems.« less

Current perspectives of herpesviral retinitis and choroiditis.

PubMed

Madhavan, H N; Priya, K; Biswas, J

2004-10-01

Vision-threatening viral retinitis are primarily caused by members of the herpesvirus family. The biology and molecular characterization of herpesviruses, clinical presentations of retinopathies, pathology and pathogenesis including the host responses, epidemiology and the laboratory methods of aetiological diagnosis of these diseases are described. Clinical syndromes are acute retinal necrosis (ARN), progressive outer retinal necrosis (PORN), cytomegalovirus (CMV) retinitis, multifocal choroiditis and serpiginous choroiditis besides other viral retinopathies. Herpes simplex virus (HSV) retinitis is more common in immunocompetent persons while varicella zoster virus (VZV) affects both immunocompetent and immunosuppressed patients equally. CMV retinitis is most common among patients with AIDS. The currently employed laboratory methods of antigen detection, virus isolation and antibody detection by enzyme linked immuno-sorbent assay (ELISA) have low sensitivity. Polymerase chain reaction (PCR) has increased the value of diagnosis due to its high clinical sensitivity and absolute specificity in detection of herpesviruses in intraocular specimens.

Monolithic focused reference beam X-ray holography

PubMed Central

Geilhufe, J.; Pfau, B.; Schneider, M.; Büttner, F.; Günther, C. M.; Werner, S.; Schaffert, S.; Guehrs, E.; Frömmel, S.; Kläui, M.; Eisebitt, S.

2014-01-01

Fourier transform holography is a highly efficient and robust imaging method, suitable for single-shot imaging at coherent X-ray sources. In its common implementation, the image contrast is limited by the reference signal generated by a small pinhole aperture. Increased pinhole diameters improve the signal, whereas the resolution is diminished. Here we report a new concept to decouple the spatial resolution from the image contrast by employing a Fresnel zone plate to provide the reference beam. Superimposed on-axis images of distinct foci are separated with a novel algorithm. Our method is insensitive to mechanical drift or vibrations and allows for long integration times common at low-flux facilities like high harmonic generation sources. The application of monolithic focused reference beams improves the efficiency of high-resolution X-ray Fourier transform holography beyond all present approaches and paves the path towards sub-10 nm single-shot X-ray imaging. PMID:24394675

National Ecosystem Assessments in Europe: A Review

PubMed Central

Schröter, Matthias; Albert, Christian; Marques, Alexandra; Tobon, Wolke; Lavorel, Sandra; Maes, Joachim; Brown, Claire; Klotz, Stefan; Bonn, Aletta

2016-01-01

Abstract National ecosystem assessments form an essential knowledge base for safeguarding biodiversity and ecosystem services. We analyze eight European (sub-)national ecosystem assessments (Portugal, United Kingdom, Spain, Norway, Flanders, Netherlands, Finland, and Germany) and compare their objectives, political context, methods, and operationalization. We observed remarkable differences in breadth of the assessment, methods employed, variety of services considered, policy mandates, and funding mechanisms. Biodiversity and ecosystem services are mainly assessed independently, with biodiversity conceptualized as underpinning services, as a source of conflict with services, or as a service in itself. Recommendations derived from our analysis for future ecosystem assessments include the needs to improve the common evidence base, to advance the mapping of services, to consider international flows of services, and to connect more strongly to policy questions. Although the context specificity of national ecosystem assessments is acknowledged as important, a greater harmonization across assessments could help to better inform common European policies and future pan-regional assessments. PMID:28533561

Frontiers of two-dimensional correlation spectroscopy. Part 2. Perturbation methods, fields of applications, and types of analytical probes

NASA Astrophysics Data System (ADS)

Noda, Isao

2014-07-01

Noteworthy experimental practices, which are advancing forward the frontiers of the field of two-dimensional (2D) correlation spectroscopy, are reviewed with the focus on various perturbation methods currently practiced to induce spectral changes, pertinent examples of applications in various fields, and types of analytical probes employed. Types of perturbation methods found in the published literature are very diverse, encompassing both dynamic and static effects. Although a sizable portion of publications report the use of dynamic perturbatuions, much greater number of studies employ static effect, especially that of temperature. Fields of applications covered by the literature are also very broad, ranging from fundamental research to practical applications in a number of physical, chemical and biological systems, such as synthetic polymers, composites and biomolecules. Aside from IR spectroscopy, which is the most commonly used tool, many other analytical probes are used in 2D correlation analysis. The ever expanding trend in depth, breadth and versatility of 2D correlation spectroscopy techniques and their broad applications all point to the robust and healthy state of the field.

Sporicidal performance induced by photocatalytic production of organic peroxide under visible light irradiation

NASA Astrophysics Data System (ADS)

Yamaguchi, Yuichi; Shimodo, Takahito; Chikamori, Noriyasu; Usuki, Sho; Kanai, Yoshihiro; Endo, Takeshi; Katsumata, Ken-Ichi; Terashima, Chiaki; Ikekita, Masahiko; Fujishima, Akira; Suzuki, Tomonori; Sakai, Hideki; Nakata, Kazuya

2016-09-01

Bacteria that cause serious food poisoning are known to sporulate under conditions of nutrient and water shortage. The resulting spores have much greater resistance to common sterilization methods, such as heating at 100 °C and exposure to various chemical agents. Because such bacteria cannot be inactivated with typical alcohol disinfectants, peroxyacetic acid (PAA) often is used, but PAA is a harmful agent that can seriously damage human health. Furthermore, concentrated hydrogen peroxide, which is also dangerous, must be used to prepare PAA. Thus, the development of a facile and safe sporicidal disinfectant is strongly required. In this study, we have developed an innovative sporicidal disinfection method that employs the combination of an aqueous ethanol solution, visible light irradiation, and a photocatalyst. We successfully produced a sporicidal disinfectant one hundred times as effective as commercially available PAA, while also resolving the hazards and odor problems associated with PAA. The method presented here can potentially be used as a replacement for the general disinfectants employed in the food and health industries.

Identifying the 'right patient': nurse and consumer perspectives on verifying patient identity during medication administration.

PubMed

Kelly, Teresa; Roper, Cath; Elsom, Stephen; Gaskin, Cadeyrn

2011-10-01

Accurate verification of patient identity during medication administration is an important component of medication administration practice. In medical and surgical inpatient settings, the use of identification aids, such as wristbands, is common. In many psychiatric inpatient units in Victoria, Australia, however, standardized identification aids are not used. The present paper outlines the findings of a qualitative research project that employed focus groups to examine mental health nurse and mental health consumer perspectives on the identification of patients during routine medication administration in psychiatric inpatient units. The study identified a range of different methods currently employed to verify patient identity, including technical methods, such as wristband and photographs, and interpersonal methods, such as patient recognition. There were marked similarities in the perspectives of mental health nurses and mental health consumers regarding their opinions and preferences. Technical aids were seen as important, but not as a replacement for the therapeutic nurse-patient encounter. © 2011 The Authors. International Journal of Mental Health Nursing © 2011 Australian College of Mental Health Nurses Inc.

A Computationally Efficient Method for Polyphonic Pitch Estimation

NASA Astrophysics Data System (ADS)

Zhou, Ruohua; Reiss, Joshua D.; Mattavelli, Marco; Zoia, Giorgio

2009-12-01

This paper presents a computationally efficient method for polyphonic pitch estimation. The method employs the Fast Resonator Time-Frequency Image (RTFI) as the basic time-frequency analysis tool. The approach is composed of two main stages. First, a preliminary pitch estimation is obtained by means of a simple peak-picking procedure in the pitch energy spectrum. Such spectrum is calculated from the original RTFI energy spectrum according to harmonic grouping principles. Then the incorrect estimations are removed according to spectral irregularity and knowledge of the harmonic structures of the music notes played on commonly used music instruments. The new approach is compared with a variety of other frame-based polyphonic pitch estimation methods, and results demonstrate the high performance and computational efficiency of the approach.

Multidimensional kinetic simulations using dissipative closures and other reduced Vlasov methods for differing particle magnetizations

NASA Astrophysics Data System (ADS)

Newman, David L.

2006-10-01

Kinetic plasma simulations in which the phase-space distribution functions are advanced directly via the coupled Vlasov and Poisson (or Maxwell) equations---better known simply as Vlasov simulations---provide a valuable low-noise complement to the more commonly employed Particle-in-Cell (PIC) simulations. However, in more than one spatial dimension Vlasov simulations become numerically demanding due to the high dimensionality of x--v phase-space. Methods that can reduce this computational demand are therefore highly desirable. Several such methods will be presented, which treat the phase-space dynamics along a dominant dimension (e.g., parallel to a beam or current) with the full Vlasov propagator, while employing a reduced description, such as moment equations, for the evolution perpendicular to the dominant dimension. A key difference between the moment-based (and other reduced) methods considered here and standard fluid methods is that the moments are now functions of a phase-space coordinate (e.g. moments of vy in z--vz--y phase space, where z is the dominant dimension), rather than functions of spatial coordinates alone. Of course, moment-based methods require closure. For effectively unmagnetized species, new dissipative closure methods inspired by those of Hammett and Perkins [PRL, 64, 3019 (1990)] have been developed, which exactly reproduce the linear electrostatic response for a broad class of distributions with power-law tails, as are commonly measured in space plasmas. The nonlinear response, which requires more care, will also be discussed. For weakly magnetized species (i.e., φs<φs) an alternative algorithm has been developed in which the distributions are assumed to gyrate about the magnetic field with a fixed nominal perpendicular ``thermal'' velocity, thereby reducing the required phase-space dimension by one. These reduced algorithms have been incorporated into 2-D codes used to study the evolution of nonlinear structures such as double layers and electron holes in Earth's auroral zone.

Analysis of organic acids and acylglycines for the diagnosis of related inborn errors of metabolism by GC- and HPLC-MS.

PubMed

la Marca, Giancarlo; Rizzo, Cristiano

2011-01-01

The analysis of organic acids in urine is commonly included in routine procedures for detecting many inborn errors of metabolism. Many analytical methods allow for both qualitative and quantitative determination of organic acids, mainly in urine but also in plasma, serum, whole blood, amniotic fluid, and cerebrospinal fluid. Liquid-liquid extraction and solid-phase extraction using anion exchange or silica columns are commonly employed approaches for sample treatment. Before analysis can be carried out using gas chromatography-mass spectrometry, organic acids must be converted into more thermally stable, volatile, and chemically inert forms, mainly trimethylsilyl ethers, esters, or methyl esters.

Correlational Neural Networks.

PubMed

Chandar, Sarath; Khapra, Mitesh M; Larochelle, Hugo; Ravindran, Balaraman

2016-02-01

Common representation learning (CRL), wherein different descriptions (or views) of the data are embedded in a common subspace, has been receiving a lot of attention recently. Two popular paradigms here are canonical correlation analysis (CCA)-based approaches and autoencoder (AE)-based approaches. CCA-based approaches learn a joint representation by maximizing correlation of the views when projected to the common subspace. AE-based methods learn a common representation by minimizing the error of reconstructing the two views. Each of these approaches has its own advantages and disadvantages. For example, while CCA-based approaches outperform AE-based approaches for the task of transfer learning, they are not as scalable as the latter. In this work, we propose an AE-based approach, correlational neural network (CorrNet), that explicitly maximizes correlation among the views when projected to the common subspace. Through a series of experiments, we demonstrate that the proposed CorrNet is better than AE and CCA with respect to its ability to learn correlated common representations. We employ CorrNet for several cross-language tasks and show that the representations learned using it perform better than the ones learned using other state-of-the-art approaches.

Disability prevalence and disability-related employment gaps in the UK 1998-2012: Different trends in different surveys?

PubMed

Baumberg, Ben; Jones, Melanie; Wass, Victoria

2015-09-01

The persistently low employment rate among disabled individuals has been an enduring concern of governments across developed countries and has been the subject of a succession of policy initiatives, including labour market activation programmes, equality laws and welfare reform. A key indicator of progress is the trend in the disability-related employment gap, the percentage point difference between the employment rate for disabled and non-disabled individuals. Confusingly for the UK, studies undertaken between 1998 and 2012 have simultaneously reported both a widening and a narrowing of the gap. The source of the discrepancy can be found in the choice of survey, the General Household Survey (GHS) or the Labour Force Survey (LFS), although both use a common conception of disability and collect self-reported information from a random sample of households. The literature has analysed these surveys separately from each other and ignored inter-survey differences in findings. The Health Survey for England (HSE), a third national household survey, replicates the GHS questions on disability but has had limited use in this context. This empirical study compares the trends in disability prevalence and the disability-related employment gap across the three surveys using a three-stage harmonisation process. The negative relationship between the prevalence of disability and the employment gap found in cross-section inter-survey comparisons prompts an initial focus on differences in the definition of disability as an explanation of the discrepancy. This is broadened to include differences in survey methods and sample composition. Differences in the trend in disability prevalence and the employment gap remain following harmonisation for definition, survey method and sample composition. It is the LFS, the main policy-influencing and policy-assessment survey, which generates outlying results. As such, we cannot be confident that the disability-related employment gap has narrowed in the UK since 1998. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Open Architecture Standard for NASA's Software-Defined Space Telecommunications Radio Systems

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.; Johnson, Sandra K.; Kacpura, Thomas J.; Hall, Charles S.; Smith, Carl R.; Liebetreu, John

2008-01-01

NASA is developing an architecture standard for software-defined radios used in space- and ground-based platforms to enable commonality among radio developments to enhance capability and services while reducing mission and programmatic risk. Transceivers (or transponders) with functionality primarily defined in software (e.g., firmware) have the ability to change their functional behavior through software alone. This radio architecture standard offers value by employing common waveform software interfaces, method of instantiation, operation, and testing among different compliant hardware and software products. These common interfaces within the architecture abstract application software from the underlying hardware to enable technology insertion independently at either the software or hardware layer. This paper presents the initial Space Telecommunications Radio System (STRS) Architecture for NASA missions to provide the desired software abstraction and flexibility while minimizing the resources necessary to support the architecture.

Robust extraction of the aorta and pulmonary artery from 3D MDCT image data

NASA Astrophysics Data System (ADS)

Taeprasartsit, Pinyo; Higgins, William E.

2010-03-01

Accurate definition of the aorta and pulmonary artery from three-dimensional (3D) multi-detector CT (MDCT) images is important for pulmonary applications. This work presents robust methods for defining the aorta and pulmonary artery in the central chest. The methods work on both contrast enhanced and no-contrast 3D MDCT image data. The automatic methods use a common approach employing model fitting and selection and adaptive refinement. During the occasional event that more precise vascular extraction is desired or the method fails, we also have an alternate semi-automatic fail-safe method. The semi-automatic method extracts the vasculature by extending the medial axes into a user-guided direction. A ground-truth study over a series of 40 human 3D MDCT images demonstrates the efficacy, accuracy, robustness, and efficiency of the methods.

Comparison through a LCA evaluation analysis of food waste disposal options from the perspective of global warming and resource recovery.

PubMed

Kim, Mi-Hyung; Kim, Jung-Wk

2010-09-01

This study evaluated feed manufacturing including dry feeding and wet feeding, composting, and landfilling for food waste disposal options from the perspective of global warming and resource recovery. The method of the expanded system boundaries was employed in order to compare different by-products. The whole stages of disposal involved in the systems such as separate discharge, collection, transportation, treatment, and final disposal, were included in the system boundary and evaluated. The Global Warming Potential generated from 1tonne of food wastes for each disposal system was analyzed by the life cycle assessment method. The results showed that 200kg of CO(2)-eq could be produced from dry feeding process, 61kg of CO(2)-eq from wet feeding process, 123kg of CO(2)-eq from composting process, and 1010kg of CO(2)-eq from landfilling. Feed manufacturing and composting, the common treatment methods currently employed, have been known to be environment friendlier than other methods. However, this study shows that they can negatively affect the environment if their by-products are not appropriately utilized as intended. Copyright 2010 Elsevier B.V. All rights reserved.

Introduction to methodology of dose-response meta-analysis for binary outcome: With application on software.

PubMed

Zhang, Chao; Jia, Pengli; Yu, Liu; Xu, Chang

2018-05-01

Dose-response meta-analysis (DRMA) is widely applied to investigate the dose-specific relationship between independent and dependent variables. Such methods have been in use for over 30 years and are increasingly employed in healthcare and clinical decision-making. In this article, we give an overview of the methodology used in DRMA. We summarize the commonly used regression model and the pooled method in DRMA. We also use an example to illustrate how to employ a DRMA by these methods. Five regression models, linear regression, piecewise regression, natural polynomial regression, fractional polynomial regression, and restricted cubic spline regression, were illustrated in this article to fit the dose-response relationship. And two types of pooling approaches, that is, one-stage approach and two-stage approach are illustrated to pool the dose-response relationship across studies. The example showed similar results among these models. Several dose-response meta-analysis methods can be used for investigating the relationship between exposure level and the risk of an outcome. However the methodology of DRMA still needs to be improved. © 2018 Chinese Cochrane Center, West China Hospital of Sichuan University and John Wiley & Sons Australia, Ltd.

Redshift data and statistical inference

NASA Technical Reports Server (NTRS)

Newman, William I.; Haynes, Martha P.; Terzian, Yervant

1994-01-01

Frequency histograms and the 'power spectrum analysis' (PSA) method, the latter developed by Yu & Peebles (1969), have been widely employed as techniques for establishing the existence of periodicities. We provide a formal analysis of these two classes of methods, including controlled numerical experiments, to better understand their proper use and application. In particular, we note that typical published applications of frequency histograms commonly employ far greater numbers of class intervals or bins than is advisable by statistical theory sometimes giving rise to the appearance of spurious patterns. The PSA method generates a sequence of random numbers from observational data which, it is claimed, is exponentially distributed with unit mean and variance, essentially independent of the distribution of the original data. We show that the derived random processes is nonstationary and produces a small but systematic bias in the usual estimate of the mean and variance. Although the derived variable may be reasonably described by an exponential distribution, the tail of the distribution is far removed from that of an exponential, thereby rendering statistical inference and confidence testing based on the tail of the distribution completely unreliable. Finally, we examine a number of astronomical examples wherein these methods have been used giving rise to widespread acceptance of statistically unconfirmed conclusions.

Hidden pattern discovery on epileptic EEG with 1-D local binary patterns and epileptic seizures detection by grey relational analysis.

PubMed

Kaya, Yılmaz

2015-09-01

This paper proposes a novel approach to detect epilepsy seizures by using Electroencephalography (EEG), which is one of the most common methods for the diagnosis of epilepsy, based on 1-Dimension Local Binary Pattern (1D-LBP) and grey relational analysis (GRA) methods. The main aim of this paper is to evaluate and validate a novel approach, which is a computer-based quantitative EEG analyzing method and based on grey systems, aimed to help decision-maker. In this study, 1D-LBP, which utilizes all data points, was employed for extracting features in raw EEG signals, Fisher score (FS) was employed to select the representative features, which can also be determined as hidden patterns. Additionally, GRA is performed to classify EEG signals through these Fisher scored features. The experimental results of the proposed approach, which was employed in a public dataset for validation, showed that it has a high accuracy in identifying epileptic EEG signals. For various combinations of epileptic EEG, such as A-E, B-E, C-E, D-E, and A-D clusters, 100, 96, 100, 99.00 and 100% were achieved, respectively. Also, this work presents an attempt to develop a new general-purpose hidden pattern determination scheme, which can be utilized for different categories of time-varying signals.

[Professional stressors and common mental health disorders: Causal links?

PubMed

Nicolas, C; Chawky, N; Jourdan-Ionescu, C; Drouin, M-S; Page, C; Houlfort, N; Beauchamp, G; Séguin, M

2018-06-01

According to the World Health Organization, depression has become the leading cause of disability in the world, contributing significantly to the burden of health issues especially in the industrialized countries. This is a major public health problem, with potential impact on work climates, productivity at work and the continued existence of the organizations. Some recent studies have examined potential links between professional factors and common mental health disorders, but none have demonstrated a direct causal link. In the present study, we explored possible links between work-related stressors and common mental health disorders, with the objective of determining priority mental health prevention axes. The study used a life trajectory method. We compared professional stressors and difficulties present in other spheres of life in the last five years between two groups: a group of 29 participants with common mental health disorders during the last five years (depression, anxiety disorders, eating disorders, substance use disorders, pathological gambling), and a group of 29 participants who have not experienced a mental health disorder in the last five years. Data were collected from semi-structured interviews with the participants using a life course analysis method. Each participant was interviewed during two or three meetings of two to three hour duration. Questions regarding difficulties in different spheres of life and mental health were asked. More precisely, data were collected with regards to the presence or absence of mental health disorders in the last five years and the nature of mental health disorders and difficulties. Moreover, we collected data pertaining to the most important positive and negative events in different spheres of life that were present in the last five years, including family life, romantic relationships, social life, academic difficulties, losses and separations, episodes of personal difficulties, financial difficulties as well as protective factors. Regarding professional difficulties present in the last five years, data were collected on different kinds of adversities such as difficulties in finding a job, periods of unemployment, frequent job changes, difficult working conditions, discrimination, difficult working relationships with colleagues and with employers, moral harassment and family-work conflicts. Participants with common mental health disorders are more concerned about having general professional difficulties at work and about having difficult working relationships with employers. However, difficulties related to other spheres of life do not differentiate the two groups. It is possible that the work environment is linked to common mental health disorders. In particular, having general professional stressors at the work place and having difficult relationships with employers can impact the occurrence of common mental health disorders. Inversely, these stressors at work can be the consequence of a common mental health disorder. Complementary studies are of interest. Professional stressors can constitute an essential part in the occurrence of common mental health disorders. Thus, the workplace seems a priority environment for deploying effective mental health prevention strategies. Moreover, this can be a strategy for organizations to improve the work climate and to increase productivity. Copyright © 2017 L'Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

Two Paradoxes in Linear Regression Analysis

PubMed Central

FENG, Ge; PENG, Jing; TU, Dongke; ZHENG, Julia Z.; FENG, Changyong

2016-01-01

Summary Regression is one of the favorite tools in applied statistics. However, misuse and misinterpretation of results from regression analysis are common in biomedical research. In this paper we use statistical theory and simulation studies to clarify some paradoxes around this popular statistical method. In particular, we show that a widely used model selection procedure employed in many publications in top medical journals is wrong. Formal procedures based on solid statistical theory should be used in model selection. PMID:28638214

Determining similarity in histological images using graph-theoretic description and matching methods for content-based image retrieval in medical diagnostics

PubMed Central

2012-01-01

Background Computer-based analysis of digitalized histological images has been gaining increasing attention, due to their extensive use in research and routine practice. The article aims to contribute towards the description and retrieval of histological images by employing a structural method using graphs. Due to their expressive ability, graphs are considered as a powerful and versatile representation formalism and have obtained a growing consideration especially by the image processing and computer vision community. Methods The article describes a novel method for determining similarity between histological images through graph-theoretic description and matching, for the purpose of content-based retrieval. A higher order (region-based) graph-based representation of breast biopsy images has been attained and a tree-search based inexact graph matching technique has been employed that facilitates the automatic retrieval of images structurally similar to a given image from large databases. Results The results obtained and evaluation performed demonstrate the effectiveness and superiority of graph-based image retrieval over a common histogram-based technique. The employed graph matching complexity has been reduced compared to the state-of-the-art optimal inexact matching methods by applying a pre-requisite criterion for matching of nodes and a sophisticated design of the estimation function, especially the prognosis function. Conclusion The proposed method is suitable for the retrieval of similar histological images, as suggested by the experimental and evaluation results obtained in the study. It is intended for the use in Content Based Image Retrieval (CBIR)-requiring applications in the areas of medical diagnostics and research, and can also be generalized for retrieval of different types of complex images. Virtual Slides The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/1224798882787923. PMID:23035717

Knowledge-based processing for aircraft flight control

NASA Technical Reports Server (NTRS)

Painter, John H.; Glass, Emily; Economides, Gregory; Russell, Paul

1994-01-01

This Contractor Report documents research in Intelligent Control using knowledge-based processing in a manner dual to methods found in the classic stochastic decision, estimation, and control discipline. Such knowledge-based control has also been called Declarative, and Hybid. Software architectures were sought, employing the parallelism inherent in modern object-oriented modeling and programming. The viewpoint adopted was that Intelligent Control employs a class of domain-specific software architectures having features common over a broad variety of implementations, such as management of aircraft flight, power distribution, etc. As much attention was paid to software engineering issues as to artificial intelligence and control issues. This research considered that particular processing methods from the stochastic and knowledge-based worlds are duals, that is, similar in a broad context. They provide architectural design concepts which serve as bridges between the disparate disciplines of decision, estimation, control, and artificial intelligence. This research was applied to the control of a subsonic transport aircraft in the airport terminal area.

Integrated Method for Purification and Single-Particle Characterization of Lentiviral Vector Systems by Size Exclusion Chromatography and Tunable Resistive Pulse Sensing.

PubMed

Heider, Susanne; Muzard, Julien; Zaruba, Marianne; Metzner, Christoph

2017-07-01

Elements derived from lentiviral particles such as viral vectors or virus-like particles are commonly used for biotechnological and biomedical applications, for example in mammalian protein expression, gene delivery or therapy, and vaccine development. Preparations of high purity are necessary in most cases, especially for clinical applications. For purification, a wide range of methods are available, from density gradient centrifugation to affinity chromatography. In this study we have employed size exclusion columns specifically designed for the easy purification of extracellular vesicles including exosomes. In addition to viral marker protein and total protein analysis, a well-established single-particle characterization technology, termed tunable resistive pulse sensing, was employed to analyze fractions of highest particle load and purity and characterize the preparations by size and surface charge/electrophoretic mobility. With this study, we propose an integrated platform combining size exclusion chromatography and tunable resistive pulse sensing for monitoring production and purification of viral particles.

Enhanced High Performance Power Compensation Methodology by IPFC Using PIGBT-IDVR

PubMed Central

Arumugom, Subramanian; Rajaram, Marimuthu

2015-01-01

Currently, power systems are involuntarily controlled without high speed control and are frequently initiated, therefore resulting in a slow process when compared with static electronic devices. Among various power interruptions in power supply systems, voltage dips play a central role in causing disruption. The dynamic voltage restorer (DVR) is a process based on voltage control that compensates for line transients in the distributed system. To overcome these issues and to achieve a higher speed, a new methodology called the Parallel IGBT-Based Interline Dynamic Voltage Restorer (PIGBT-IDVR) method has been proposed, which mainly spotlights the dynamic processing of energy reloads in common dc-linked energy storage with less adaptive transition. The interline power flow controller (IPFC) scheme has been employed to manage the power transmission between the lines and the restorer method for controlling the reactive power in the individual lines. By employing the proposed methodology, the failure of a distributed system has been avoided and provides better performance than the existing methodologies. PMID:26613101

Universal state-selective corrections to multireference coupled-cluster theories with single and double excitations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brabec, Jiri; van Dam, Hubertus JJ; Pittner, Jiri

2012-03-28

The recently proposed Universal State-Selective (USS) corrections [K. Kowalski, J. Chem. Phys. 134, 194107 (2011)] to approximate Multi-Reference Coupled Cluster (MRCC) energies can be commonly applied to any type of MRCC theory based on the Jeziorski-Monkhorst [B. Jeziorski, H.J. Monkhorst, Phys. Rev. A 24, 1668 (1981)] exponential Ansatz. In this letter we report on the performance of a simple USS correction to the Brillouin-Wigner MRCC (BW-MRCC) formalism employing single and double excitations (BW-MRCCSD). It is shown that the resulting formalism (USS-BW-MRCCSD), which uses the manifold of single and double excitations to construct the correction, can be related to a posteriorimore » corrections utilized in routine BW-MRCCSD calculations. In several benchmark calculations we compare the results of the USS-BW-MRCCSD method with results of the BW-MRCCSD approach employing a posteriori corrections and with results obtained with the Full Configuration Interaction (FCI) method.« less

47 CFR 101.311 - Equal employment opportunities.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Equal employment opportunities. 101.311 Section 101.311 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Miscellaneous Common Carrier Provisions § 101.311 Equal employment...

47 CFR 101.311 - Equal employment opportunities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Equal employment opportunities. 101.311 Section 101.311 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Miscellaneous Common Carrier Provisions § 101.311 Equal employment...

47 CFR 101.311 - Equal employment opportunities.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Equal employment opportunities. 101.311 Section 101.311 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Miscellaneous Common Carrier Provisions § 101.311 Equal employment...

47 CFR 101.311 - Equal employment opportunities.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Equal employment opportunities. 101.311 Section 101.311 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Miscellaneous Common Carrier Provisions § 101.311 Equal employment...

47 CFR 101.311 - Equal employment opportunities.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Equal employment opportunities. 101.311 Section 101.311 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Miscellaneous Common Carrier Provisions § 101.311 Equal employment...

Atomic Spectral Methods for Ab Initio Molecular Electronic Energy Surfaces: Transitioning From Small-Molecule to Biomolecular-Suitable Approaches.

PubMed

Mills, Jeffrey D; Ben-Nun, Michal; Rollin, Kyle; Bromley, Michael W J; Li, Jiabo; Hinde, Robert J; Winstead, Carl L; Sheehy, Jeffrey A; Boatz, Jerry A; Langhoff, Peter W

2016-08-25

Continuing attention has addressed incorportation of the electronically dynamical attributes of biomolecules in the largely static first-generation molecular-mechanical force fields commonly employed in molecular-dynamics simulations. We describe here a universal quantum-mechanical approach to calculations of the electronic energy surfaces of both small molecules and large aggregates on a common basis which can include such electronic attributes, and which also seems well-suited to adaptation in ab initio molecular-dynamics applications. In contrast to the more familiar orbital-product-based methodologies employed in traditional small-molecule computational quantum chemistry, the present approach is based on an "ex-post-facto" method in which Hamiltonian matrices are evaluated prior to wave function antisymmetrization, implemented here in the support of a Hilbert space of orthonormal products of many-electron atomic spectral eigenstates familiar from the van der Waals theory of long-range interactions. The general theory in its various forms incorporates the early semiempirical atoms- and diatomics-in-molecules approaches of Moffitt, Ellison, Tully, Kuntz, and others in a comprehensive mathematical setting, and generalizes the developments of Eisenschitz, London, Claverie, and others addressing electron permutation symmetry adaptation issues, completing these early attempts to treat van der Waals and chemical forces on a common basis. Exact expressions are obtained for molecular Hamiltonian matrices and for associated energy eigenvalues as sums of separate atomic and interaction-energy terms, similar in this respect to the forms of classical force fields. The latter representation is seen to also provide a long-missing general definition of the energies of individual atoms and of their interactions within molecules and matter free from subjective additional constraints. A computer code suite is described for calculations of the many-electron atomic eigenspectra and the pairwise-atomic Hamiltonian matrices required for practical applications. These matrices can be retained as functions of scalar atomic-pair separations and employed in assembling aggregate Hamiltonian matrices, with Wigner rotation matrices providing analytical representations of their angular degrees of freedom. In this way, ab initio potential energy surfaces are obtained in the complete absence of repeated evaluations and transformations of the one- and two-electron integrals at different molecular geometries required in most ab inito molecular calculations, with large Hamiltonian matrix assembly simplified and explicit diagonalizations avoided employing partitioning and Brillouin-Wigner or Rayleigh-Schrödinger perturbation theory. Illustrative applications of the important components of the formalism, selected aspects of the scaling of the approach, and aspects of "on-the-fly" interfaces with Monte Carlo and molecular-dynamics methods are described in anticipation of subsequent applications to biomolecules and other large aggregates.

A comparison of two closely-related approaches to aerodynamic design optimization

NASA Technical Reports Server (NTRS)

Shubin, G. R.; Frank, P. D.

1991-01-01

Two related methods for aerodynamic design optimization are compared. The methods, called the implicit gradient approach and the variational (or optimal control) approach, both attempt to obtain gradients necessary for numerical optimization at a cost significantly less than that of the usual black-box approach that employs finite difference gradients. While the two methods are seemingly quite different, they are shown to differ (essentially) in that the order of discretizing the continuous problem, and of applying calculus, is interchanged. Under certain circumstances, the two methods turn out to be identical. We explore the relationship between these methods by applying them to a model problem for duct flow that has many features in common with transonic flow over an airfoil. We find that the gradients computed by the variational method can sometimes be sufficiently inaccurate to cause the optimization to fail.

Hierarchical Bayesian analysis to incorporate age uncertainty in growth curve analysis and estimates of age from length: Florida manatee (Trichechus manatus) carcasses

USGS Publications Warehouse

Schwarz, L.K.; Runge, M.C.

2009-01-01

Age estimation of individuals is often an integral part of species management research, and a number of ageestimation techniques are commonly employed. Often, the error in these techniques is not quantified or accounted for in other analyses, particularly in growth curve models used to describe physiological responses to environment and human impacts. Also, noninvasive, quick, and inexpensive methods to estimate age are needed. This research aims to provide two Bayesian methods to (i) incorporate age uncertainty into an age-length Schnute growth model and (ii) produce a method from the growth model to estimate age from length. The methods are then employed for Florida manatee (Trichechus manatus) carcasses. After quantifying the uncertainty in the aging technique (counts of ear bone growth layers), we fit age-length data to the Schnute growth model separately by sex and season. Independent prior information about population age structure and the results of the Schnute model are then combined to estimate age from length. Results describing the age-length relationship agree with our understanding of manatee biology. The new methods allow us to estimate age, with quantified uncertainty, for 98% of collected carcasses: 36% from ear bones, 62% from length.

A Large-Scale Study of Fingerprint Matching Systems for Sensor Interoperability Problem

PubMed Central

Hussain, Muhammad; AboAlSamh, Hatim; AlZuair, Mansour

2018-01-01

The fingerprint is a commonly used biometric modality that is widely employed for authentication by law enforcement agencies and commercial applications. The designs of existing fingerprint matching methods are based on the hypothesis that the same sensor is used to capture fingerprints during enrollment and verification. Advances in fingerprint sensor technology have raised the question about the usability of current methods when different sensors are employed for enrollment and verification; this is a fingerprint sensor interoperability problem. To provide insight into this problem and assess the status of state-of-the-art matching methods to tackle this problem, we first analyze the characteristics of fingerprints captured with different sensors, which makes cross-sensor matching a challenging problem. We demonstrate the importance of fingerprint enhancement methods for cross-sensor matching. Finally, we conduct a comparative study of state-of-the-art fingerprint recognition methods and provide insight into their abilities to address this problem. We performed experiments using a public database (FingerPass) that contains nine datasets captured with different sensors. We analyzed the effects of different sensors and found that cross-sensor matching performance deteriorates when different sensors are used for enrollment and verification. In view of our analysis, we propose future research directions for this problem. PMID:29597286

A Large-Scale Study of Fingerprint Matching Systems for Sensor Interoperability Problem.

PubMed

AlShehri, Helala; Hussain, Muhammad; AboAlSamh, Hatim; AlZuair, Mansour

2018-03-28

The fingerprint is a commonly used biometric modality that is widely employed for authentication by law enforcement agencies and commercial applications. The designs of existing fingerprint matching methods are based on the hypothesis that the same sensor is used to capture fingerprints during enrollment and verification. Advances in fingerprint sensor technology have raised the question about the usability of current methods when different sensors are employed for enrollment and verification; this is a fingerprint sensor interoperability problem. To provide insight into this problem and assess the status of state-of-the-art matching methods to tackle this problem, we first analyze the characteristics of fingerprints captured with different sensors, which makes cross-sensor matching a challenging problem. We demonstrate the importance of fingerprint enhancement methods for cross-sensor matching. Finally, we conduct a comparative study of state-of-the-art fingerprint recognition methods and provide insight into their abilities to address this problem. We performed experiments using a public database (FingerPass) that contains nine datasets captured with different sensors. We analyzed the effects of different sensors and found that cross-sensor matching performance deteriorates when different sensors are used for enrollment and verification. In view of our analysis, we propose future research directions for this problem.

Comprehensive automation of the solid phase extraction gas chromatographic mass spectrometric analysis (SPE-GC/MS) of opioids, cocaine, and metabolites from serum and other matrices.

PubMed

Lerch, Oliver; Temme, Oliver; Daldrup, Thomas

2014-07-01

The analysis of opioids, cocaine, and metabolites from blood serum is a routine task in forensic laboratories. Commonly, the employed methods include many manual or partly automated steps like protein precipitation, dilution, solid phase extraction, evaporation, and derivatization preceding a gas chromatography (GC)/mass spectrometry (MS) or liquid chromatography (LC)/MS analysis. In this study, a comprehensively automated method was developed from a validated, partly automated routine method. This was possible by replicating method parameters on the automated system. Only marginal optimization of parameters was necessary. The automation relying on an x-y-z robot after manual protein precipitation includes the solid phase extraction, evaporation of the eluate, derivatization (silylation with N-methyl-N-trimethylsilyltrifluoroacetamide, MSTFA), and injection into a GC/MS. A quantitative analysis of almost 170 authentic serum samples and more than 50 authentic samples of other matrices like urine, different tissues, and heart blood on cocaine, benzoylecgonine, methadone, morphine, codeine, 6-monoacetylmorphine, dihydrocodeine, and 7-aminoflunitrazepam was conducted with both methods proving that the analytical results are equivalent even near the limits of quantification (low ng/ml range). To our best knowledge, this application is the first one reported in the literature employing this sample preparation system.

Improved Method for Prediction of Attainable Wing Leading-Edge Thrust

NASA Technical Reports Server (NTRS)

Carlson, Harry W.; McElroy, Marcus O.; Lessard, Wendy B.; McCullers, L. Arnold

1996-01-01

Prediction of the loss of wing leading-edge thrust and the accompanying increase in drag due to lift, when flow is not completely attached, presents a difficult but commonly encountered problem. A method (called the previous method) for the prediction of attainable leading-edge thrust and the resultant effect on airplane aerodynamic performance has been in use for more than a decade. Recently, the method has been revised to enhance its applicability to current airplane design and evaluation problems. The improved method (called the present method) provides for a greater range of airfoil shapes from very sharp to very blunt leading edges. It is also based on a wider range of Reynolds numbers than was available for the previous method. The present method, when employed in computer codes for aerodynamic analysis, generally results in improved correlation with experimental wing-body axial-force data and provides reasonable estimates of the measured drag.

[A range of mobbing among female and male nurses employed in the Szczecin hospitals].

PubMed

Kunecka, Danuta; Kamińska, Magdalena; Karakiewicz, Beata

2008-01-01

Workplace mobbing, a particular type of conflict, has recently been recognized as one of the factors of occupational hazard, resulting from the social environment. Health service workers belong to occupational groups, which are particularly exposed to mobbing. Moreover, changes in the structure of medical labor market make that nurses often work under strong pressure and thus the phenomenon of mobbing becomes even more intensified. The aim of this study was to analyze the incidence of mobbing in the nursing stuff employed in the Szczecin hospitals. The method of diagnostic poll was based on a questionnaire, developed and distributed among 1578 respondents employed in hospitals in Szczecin. Of this number, 1261 correctly completed questionnaires were statistically analyzed. The results showed that the phenomenon of mobbing is actually common in the nursing occupational group (18.6%). The majority (40%) of respondents indicated a superior as a mobber (torturer). The high incidence of mobbing observed in the nursing occupational group may evidence that Human Resource Management (HRM) processes are not perfect.

Nonadditivity of van der Waals forces on liquid surfaces

NASA Astrophysics Data System (ADS)

Venkataram, Prashanth S.; Whitton, Jeremy D.; Rodriguez, Alejandro W.

2016-09-01

We present an approach for modeling nanoscale wetting and dewetting of textured solid surfaces that exploits recently developed, sophisticated techniques for computing exact long-range dispersive van der Waals (vdW) or (more generally) Casimir forces in arbitrary geometries. We apply these techniques to solve the variational formulation of the Young-Laplace equation and predict the equilibrium shapes of liquid-vacuum interfaces near solid gratings. We show that commonly employed methods of computing vdW interactions based on additive Hamaker or Derjaguin approximations, which neglect important electromagnetic boundary effects, can result in large discrepancies in the shapes and behaviors of liquid surfaces compared to exact methods.

An overview of methods for comparative effectiveness research.

PubMed

Meyer, Anne-Marie; Wheeler, Stephanie B; Weinberger, Morris; Chen, Ronald C; Carpenter, William R

2014-01-01

Comparative effectiveness research (CER) is a broad category of outcomes research encompassing many different methods employed by researchers and clinicians from numerous disciplines. The goal of cancer-focused CER is to generate new knowledge to assist cancer stakeholders in making informed decisions that will improve health care and outcomes of both individuals and populations. There are numerous CER methods that may be used to examine specific questions, including randomized controlled trials, observational studies, systematic literature reviews, and decision sciences modeling. Each has its strengths and weaknesses. To both inform and serve as a reference for readers of this issue of Seminars in Radiation Oncology as well as the broader oncology community, we describe CER and several of the more commonly used approaches and analytical methods. © 2013 Published by Elsevier Inc.

Ethnographic methods for process evaluations of complex health behaviour interventions.

PubMed

Morgan-Trimmer, Sarah; Wood, Fiona

2016-05-04

This article outlines the contribution that ethnography could make to process evaluations for trials of complex health-behaviour interventions. Process evaluations are increasingly used to examine how health-behaviour interventions operate to produce outcomes and often employ qualitative methods to do this. Ethnography shares commonalities with the qualitative methods currently used in health-behaviour evaluations but has a distinctive approach over and above these methods. It is an overlooked methodology in trials of complex health-behaviour interventions that has much to contribute to the understanding of how interventions work. These benefits are discussed here with respect to three strengths of ethnographic methodology: (1) producing valid data, (2) understanding data within social contexts, and (3) building theory productively. The limitations of ethnography within the context of process evaluations are also discussed.

Faraday anomalous dispersion optical tuners

NASA Technical Reports Server (NTRS)

Wanninger, P.; Valdez, E. C.; Shay, T. M.

1992-01-01

Common methods for frequency stabilizing diode lasers systems employ gratings, etalons, optical electric double feedback, atomic resonance, and a Faraday cell with low magnetic field. Our method, the Faraday Anomalous Dispersion Optical Transmitter (FADOT) laser locking, is much simpler than other schemes. The FADOT uses commercial laser diodes with no antireflection coatings, an atomic Faraday cell with a single polarizer, and an output coupler to form a compound cavity. This method is vibration insensitive, thermal expansion effects are minimal, and the system has a frequency pull in range of 443.2 GHz (9A). Our technique is based on the Faraday anomalous dispersion optical filter. This method has potential applications in optical communication, remote sensing, and pumping laser excited optical filters. We present the first theoretical model for the FADOT and compare the calculations to our experimental results.

Developing alternative methods for determining the incidence, prevalence, and cost burden of coronary heart disease in a corporate population.

PubMed

Beckowski, Meghan Short; Goyal, Abhinav; Goetzel, Ron Z; Rinehart, Christine L; Darling, Kathryn J; Yarborough, Charles M

2012-08-01

To determine the most appropriate methods for estimating the prevalence and incidence of coronary heart disease (CHD), the associated risk factors, and health care costs in a corporate setting. Using medical insurance claims data for the period of 2005-2009 from 18 companies in the Thomson Reuters MarketScan reg database, we evaluated three alternative methods. Prevalence of CHD ranged from 2.1% to 4.0% using a method requiring a second confirmatory claim. Annual incidence of CHD ranged from 1.0% to 1.6% using a method requiring 320 days of benefits enrollment in the previous year, and one claim for a diagnosis of CHD. Alternative methods for determining the epidemiologic and cost burden of CHD using insurance claims data were explored. These methods can inform organizations that want to quantify the health and cost burden of various diseases common among an employed population.

An Examination to Determine the English Competencies Required of Secretaries in the Administrative, Legal and Medical Areas with a Synthesis into a Core of Common Competencies to be Used in Forming a Basis for an English Curriculum. Final Report.

ERIC Educational Resources Information Center

Radloff, David Maurice

The central problem of the study was to determine the English competencies required of secretaries in the Medical, Legal and Administrative Secretarial Areas. The questionnaire/interview method was employed, utilizing 50 questionnaires and ten interviews in each of the three secretarial areas, and distributing them to imployers and employees…

Tinea Capitis in Infants

PubMed Central

Michaels, Brent D.

2012-01-01

Tinea capitis is a reasonably common infection among the pediatric population; however, it is still a relatively rare entity among infants less than one year of age. As such, a high index of suspicion is necessary for diagnosis among infants and an appropriate diagnostic work up should be employed in any case where a dermatophyte infection is suspected. Several methods are available for diagnosis. In addition, proper identification of the specific dermatophyte genera involved should be considered as treatment options may be altered based on the causative pathogen identified. PMID:22468173

Fifth Conference on Artificial Intelligence for Space Applications

NASA Technical Reports Server (NTRS)

Odell, Steve L. (Compiler)

1990-01-01

The Fifth Conference on Artificial Intelligence for Space Applications brings together diverse technical and scientific work in order to help those who employ AI methods in space applications to identify common goals and to address issues of general interest in the AI community. Topics include the following: automation for Space Station; intelligent control, testing, and fault diagnosis; robotics and vision; planning and scheduling; simulation, modeling, and tutoring; development tools and automatic programming; knowledge representation and acquisition; and knowledge base/data base integration.

Olodaterol and vilanterol detection in sport drug testing.

PubMed

Chundela, Zdenek; Große, Joachim

2015-01-01

The possibility of the detection of olodaterol and vilanterol, two novel β2 -agonists, in human urine for the purpose of sport drug testing was investigated. Compounds of interest were analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) employing methods commonly used in the World Anti-Doping Agency (WADA) accredited laboratories. For both substances, the respective parent compound was found to be a suitable target analyte for monitoring therapeutic dose administration. Copyright © 2015 John Wiley & Sons, Ltd.

Delayed Workforce Entry and High Emigration Rates for Recent Canadian Radiation Oncology Graduates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loewen, Shaun K., E-mail: shaun.loewen@cancercare.mb.ca; Halperin, Ross; Lefresne, Shilo

Purpose: To determine the employment status and location of recent Canadian radiation oncology (RO) graduates and to identify current workforce entry trends. Methods and Materials: A fill-in-the-blank spreadsheet was distributed to all RO program directors in December 2013 and June 2014, requesting the employment status and location of their graduates over the last 3 years. Visa trainee graduates were excluded. Results: Response rate from program directors was 100% for both survey administrations. Of 101 graduates identified, 99 (98%) had known employment status and location. In the December survey, 5 2013 graduates (16%), 17 2012 graduates (59%), and 18 2011 graduates (75%) hadmore » permanent staff employment. Six months later, 5 2014 graduates (29%), 15 2013 graduates (48%), 24 2012 graduates (83%), and 21 2011 graduates (88%) had secured staff positions. Fellowships and temporary locums were common for those without staff employment. The proportion of graduates with staff positions abroad increased from 22% to 26% 6 months later. Conclusions: Workforce entry for most RO graduates was delayed but showed steady improvement with longer time after graduation. High emigration rates for jobs abroad signify domestic employment challenges for newly certified, Canadian-trained radiation oncologists. Coordination on a national level is required to address and regulate radiation oncologist supply and demand disequilibrium in Canada.« less

Reef Fish Survey Techniques: Assessing the Potential for Standardizing Methodologies.

PubMed

Caldwell, Zachary R; Zgliczynski, Brian J; Williams, Gareth J; Sandin, Stuart A

2016-01-01

Dramatic changes in populations of fishes living on coral reefs have been documented globally and, in response, the research community has initiated efforts to assess and monitor reef fish assemblages. A variety of visual census techniques are employed, however results are often incomparable due to differential methodological performance. Although comparability of data may promote improved assessment of fish populations, and thus management of often critically important nearshore fisheries, to date no standardized and agreed-upon survey method has emerged. This study describes the use of methods across the research community and identifies potential drivers of method selection. An online survey was distributed to researchers from academic, governmental, and non-governmental organizations internationally. Although many methods were identified, 89% of survey-based projects employed one of three methods-belt transect, stationary point count, and some variation of the timed swim method. The selection of survey method was independent of the research design (i.e., assessment goal) and region of study, but was related to the researcher's home institution. While some researchers expressed willingness to modify their current survey protocols to more standardized protocols (76%), their willingness decreased when methodologies were tied to long-term datasets spanning five or more years. Willingness to modify current methodologies was also less common among academic researchers than resource managers. By understanding both the current application of methods and the reported motivations for method selection, we hope to focus discussions towards increasing the comparability of quantitative reef fish survey data.

29 CFR 780.714 - Employees employed “in such operations” to be counted.

Code of Federal Regulations, 2010 CFR

2010-07-01

... § 780.714 Employees employed “in such operations” to be counted. (a) The five-employee limitation on the... operations.” This means that the employees to be counted include those employed in, and do not include any who are not employed in, the operations of the establishment commonly recognized as a country elevator...

Working While Studying: The Impact of Term-Time Employment on Dropout Rates

ERIC Educational Resources Information Center

Hovdhaugen, Elisabeth

2015-01-01

There are many possible reasons why students leave university prior to degree completion, and one of the more commonly cited is being employed while studying. This paper analyses the impact of employment status on dropout rates using survival analysis. It finds that employment status does have an impact on dropout rates; students who work full…

New Common Proper-Motion Pairs with R.A. Between 00h and 01h

NASA Astrophysics Data System (ADS)

Caballero, Rafael

2015-07-01

This paper presents 37 new common proper-motion pairs. The new pairs have been obtained employing a semi-automatic procedure based on the inspection of images using the tool Aladin, completed with information obtained from the catalogs available at VizieR. All the pairs fulfill the Halbwachs criteria, employed to increase the probability of a physical bond between the two components.

A scalable parallel black oil simulator on distributed memory parallel computers

NASA Astrophysics Data System (ADS)

Wang, Kun; Liu, Hui; Chen, Zhangxin

2015-11-01

This paper presents our work on developing a parallel black oil simulator for distributed memory computers based on our in-house parallel platform. The parallel simulator is designed to overcome the performance issues of common simulators that are implemented for personal computers and workstations. The finite difference method is applied to discretize the black oil model. In addition, some advanced techniques are employed to strengthen the robustness and parallel scalability of the simulator, including an inexact Newton method, matrix decoupling methods, and algebraic multigrid methods. A new multi-stage preconditioner is proposed to accelerate the solution of linear systems from the Newton methods. Numerical experiments show that our simulator is scalable and efficient, and is capable of simulating extremely large-scale black oil problems with tens of millions of grid blocks using thousands of MPI processes on parallel computers.

Collective network routing

DOEpatents

Hoenicke, Dirk

2014-12-02

Disclosed are a unified method and apparatus to classify, route, and process injected data packets into a network so as to belong to a plurality of logical networks, each implementing a specific flow of data on top of a common physical network. The method allows to locally identify collectives of packets for local processing, such as the computation of the sum, difference, maximum, minimum, or other logical operations among the identified packet collective. Packets are injected together with a class-attribute and an opcode attribute. Network routers, employing the described method, use the packet attributes to look-up the class-specific route information from a local route table, which contains the local incoming and outgoing directions as part of the specifically implemented global data flow of the particular virtual network.

Quantification of baseline pupillary response and task-evoked pupillary response during constant and incremental task load.

PubMed

Mosaly, Prithima R; Mazur, Lukasz M; Marks, Lawrence B

2017-10-01

The methods employed to quantify the baseline pupil size and task-evoked pupillary response (TEPR) may affect the overall study results. To test this hypothesis, the objective of this study was to assess variability in baseline pupil size and TEPR during two basic working memory tasks: constant load of 3-letters memorisation-recall (10 trials), and incremental load memorisation-recall (two trials of each load level), using two commonly used methods (1) change from trail/load specific baseline, (2) change from constant baseline. Results indicated that there was a significant shift in baseline between the trails for constant load, and between the load levels for incremental load. The TEPR was independent of shifts in baseline using method 1 only for constant load, and method 2 only for higher levels of incremental load condition. These important findings suggest that the assessment of both the baseline and methods to quantify TEPR are critical in ergonomics application, especially in studies with small number of trials per subject per condition. Practitioner Summary: Quantification of TEPR can be affected by shifts in baseline pupil size that are most likely affected by non-cognitive factors when other external factors are kept constant. Therefore, quantification methods employed to compute both baseline and TEPR are critical in understanding the information processing of humans in practical ergonomics settings.

Determining similarity in histological images using graph-theoretic description and matching methods for content-based image retrieval in medical diagnostics.

PubMed

Sharma, Harshita; Alekseychuk, Alexander; Leskovsky, Peter; Hellwich, Olaf; Anand, R S; Zerbe, Norman; Hufnagl, Peter

2012-10-04

Computer-based analysis of digitalized histological images has been gaining increasing attention, due to their extensive use in research and routine practice. The article aims to contribute towards the description and retrieval of histological images by employing a structural method using graphs. Due to their expressive ability, graphs are considered as a powerful and versatile representation formalism and have obtained a growing consideration especially by the image processing and computer vision community. The article describes a novel method for determining similarity between histological images through graph-theoretic description and matching, for the purpose of content-based retrieval. A higher order (region-based) graph-based representation of breast biopsy images has been attained and a tree-search based inexact graph matching technique has been employed that facilitates the automatic retrieval of images structurally similar to a given image from large databases. The results obtained and evaluation performed demonstrate the effectiveness and superiority of graph-based image retrieval over a common histogram-based technique. The employed graph matching complexity has been reduced compared to the state-of-the-art optimal inexact matching methods by applying a pre-requisite criterion for matching of nodes and a sophisticated design of the estimation function, especially the prognosis function. The proposed method is suitable for the retrieval of similar histological images, as suggested by the experimental and evaluation results obtained in the study. It is intended for the use in Content Based Image Retrieval (CBIR)-requiring applications in the areas of medical diagnostics and research, and can also be generalized for retrieval of different types of complex images. The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/1224798882787923.

Early Recovery of Salmonella from Food Using a 6-Hour Non-selective Pre-enrichment and Reformulation of Tetrathionate Broth.

PubMed

Daquigan, Ninalynn; Grim, Christopher J; White, James R; Hanes, Darcy E; Jarvis, Karen G

2016-01-01

Culture based methods are commonly employed to detect pathogens in food and environmental samples. These methods are time consuming and complex, requiring multiple non-selective and selective enrichment broths, and usually take at least 1 week to recover and identify pathogens. Improving pathogen detection in foods is a primary goal for regulatory agencies and industry. Salmonella detection in food relies on a series of culture steps in broth formulations optimized to resuscitate Salmonella and reduce the abundance of competitive bacteria. Examples of non-selective pre-enrichment broths used to isolate Salmonella from food include Lactose, Universal Pre-enrichment, BPW, and Trypticase Soy broths. Tetrathionate (TT) and Rappaport-Vassiliadis (RV) broths are employed after a 24-h non-selective enrichment to select for Salmonella and hamper the growth of competitive bacteria. In this study, we tested a new formulation of TT broth that lacks brilliant green dye and has lower levels of TT . We employed this TT broth formulation in conjunction with a 6-h non-selective pre-enrichment period and determined that Salmonella recovery was possible one day earlier than standard food culture methods. We tested the shortened culture method in different non-selective enrichment broths, enumerated Salmonella in the non-selective enrichments, and used 16S rRNA gene sequencing to determine the proportional abundances of Salmonella in the TT and RV selective enrichments. Together these data revealed that a 6-h non-selective pre-enrichment reduces the levels of competitive bacteria inoculated into the selective TT and RV broths, enabling the recovery of Salmonella 1 day earlier than standard culture enrichment methods.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Timonen, Hilkka; Cubison, Mike; Aurela, Minna

The applicability, methods and limitations of constrained peak fitting on mass spectra of low mass resolving power ( m/Δ m 50~500) recorded with a time-of-flight aerosol chemical speciation monitor (ToF-ACSM) are explored. Calibration measurements as well as ambient data are used to exemplify the methods that should be applied to maximise data quality and assess confidence in peak-fitting results. Sensitivity analyses and basic peak fit metrics such as normalised ion separation are employed to demonstrate which peak-fitting analyses commonly performed in high-resolution aerosol mass spectrometry are appropriate to perform on spectra of this resolving power. Information on aerosol sulfate, nitrate,more » sodium chloride, methanesulfonic acid as well as semi-volatile metal species retrieved from these methods is evaluated. The constants in a commonly used formula for the estimation of the mass concentration of hydrocarbon-like organic aerosol may be refined based on peak-fitting results. Lastly, application of a recently published parameterisation for the estimation of carbon oxidation state to ToF-ACSM spectra is validated for a range of organic standards and its use demonstrated for ambient urban data.« less

Fundamentals in Biostatistics for Investigation in Pediatric Dentistry: Part II -Biostatistical Methods.

PubMed

Pozos-Guillén, Amaury; Ruiz-Rodríguez, Socorro; Garrocho-Rangel, Arturo

The main purpose of the second part of this series was to provide the reader with some basic aspects of the most common biostatistical methods employed in health sciences, in order to better understand the validity, significance and reliability of the results from any article on Pediatric Dentistry. Currently, as mentioned in the first paper, Pediatric Dentists need basic biostatistical knowledge to be able to apply it when critically appraise a dental article during the Evidence-based Dentistry (EBD) process, or when participating in the development of a clinical study with dental pediatric patients. The EBD process provides a systematic approach of collecting, review and analyze current and relevant published evidence about oral health care in order to answer a particular clinical question; then this evidence should be applied in everyday practice. This second report describes the most commonly used statistical methods for analyzing and interpret collected data, and the methodological criteria to be considered when choosing the most appropriate tests for a specific study. These are available to Pediatric Dentistry practicants interested in reading or designing original clinical or epidemiological studies.

Employment in Contemporary Japan.

ERIC Educational Resources Information Center

Dillon, Ken; And Others

This paper presents guidelines and suggestions for non-Japanese English-as-a-Second-Language teachers seeking employment in Japan. The first section outlines the educational qualifications needed to teach in language schools, secondary schools, and higher education institutions, and notes common employment patterns and the timing required to make…

Self-employed individuals performing different types of work have different occupational safety and health problems.

PubMed

Park, Jungsun; Han, Boyoung; Kim, Yangho

2018-05-22

We assessed the occupational safety and health (OSH) issues of self-employed individuals in Korea. The working conditions and OSH issues in three groups were analyzed using the Korean Working Conditions Survey of 2014. Among self-employed individuals, "Physical work" was more common among males, whereas "Emotional work" was more common among females. Self-employed individuals performing "Mental work" had more education, higher incomes, and the lowest exposure to physical/chemical and ergonomic hazards in the workplace. In contrast, those performing "Physical work" were older, had less education, lower incomes, greater exposure to physical/chemical and ergonomic hazards in the workplace, and more health problems. Individuals performing "Physical work" were most vulnerable to OSH problems. The self-employed are a heterogeneous group of individuals. We suggest development of specific strategies that focus on workers performing "Physical work" to improve the health and safety of self-employed workers in Korea. © 2018 Wiley Periodicals, Inc.

Health services for reproductive tract infections among female migrant workers in industrial zones in Ha Noi, Viet Nam: an in-depth assessment

PubMed Central

2012-01-01

Background Rural-to-urban migration involves a high proportion of females because job opportunities for female migrants have increased in urban industrial areas. Those who migrate may be healthier than those staying in the village and they may benefit from better health care services at destination, but the 'healthy' effect can be reversed at destination due to migration-related health risk factors. The study aimed to explore the need for health care services for reproductive tract infections (RTIs) among female migrants working in the Sai Dong industrial zone as well as their services utilization. Methods The cross sectional study employed a mixed method approach. A cohort of 300 female migrants was interviewed to collect quantitative data. Two focus groups and 20 in-depth interviews were conducted to collect qualitative data. We have used frequency and cross-tabulation techniques to analyze the quantitative data and the qualitative data was used to triangulate and to provide more in-depth information. Results The needs for health care services for RTI were high as 25% of participants had RTI syndromes. Only 21.6% of female migrants having RTI syndromes ever seek helps for health care services. Barriers preventing migrants to access services were traditional values, long working hours, lack of information, and high cost of services. Employers had limited interests in reproductive health of female migrants, and there was ineffective collaboration between the local health system and enterprises. These barriers were partly caused by lack of health promotion programs suitable for migrants. Most respondents needed more information on RTIs and preferred to receive these from their employers since they commonly work shifts - and spend most of their day time at work. Conclusion While RTIs are a common health problem among female migrant workers in industrial zones, female migrants had many obstacles in accessing RTI care services. The findings from this study will help to design intervention models for RTI among this vulnerable group such as communication for behavioural impact of RTI health care, fostered collaboration between local health care services and employer enterprises, and on-site service (e.g. local or enterprise health clinics) strengthening. PMID:22369718

Comparison of a modified mid-coronal sectioning technique and Wilson's technique when conducting eye and brain examinations in rabbit teratology studies.

PubMed

Ziejewski, Mary K; Solomon, Howard M; Rendemonti, Joyce; Stanislaus, Dinesh

2015-02-01

There are two methods used when examining fetal rabbit eyes and brain in teratology studies. One method employs prior fixation before serial sectioning (Wilson's technique) and the other uses fresh tissue (mid-coronal sectioning). We modified the mid-coronal sectioning technique to include removal of eyes and brain for closer examination and to increase the number of structures that can be evaluated and compared it to the Wilson's technique. We found that external examination of the head, in conjunction with either sectioning method, is equally sensitive in identifying developmental defects. We evaluated 40,401 New Zealand White (NZW) and Dutch-Belted (DB) rabbit fetuses for external head alterations, of which 28,538 fetuses were further examined for eye and brain alterations using the modified mid-coronal sectioning method (16,675 fetuses) or Wilson's technique (11,863 fetuses). The fetuses were from vehicle control or drug-treated pregnant rabbits in embryo-fetal development studies conducted to meet international regulatory requirements for the development of new drugs. Both methods detected the more common alterations (microphthalmia and dilated lateral cerebral ventricles) and other less common findings (changes in size and/or shape of eye and brain structures). While both methods are equally sensitive at detecting common and rare developmental defects, the modified mid-coronal sectioning technique eliminates the use of chemicals and concomitant fixation artifacts that occur with the Wilson's technique and allows for examination of 100% intact fetuses thereby increasing potential for detecting eye and brain alterations as these findings occur infrequently in rabbits. © 2015 Wiley Periodicals, Inc.

Efficiency of personal dosimetry methods in vascular interventional radiology.

PubMed

Bacchim Neto, Fernando Antonio; Alves, Allan Felipe Fattori; Mascarenhas, Yvone Maria; Giacomini, Guilherme; Maués, Nadine Helena Pelegrino Bastos; Nicolucci, Patrícia; de Freitas, Carlos Clayton Macedo; Alvarez, Matheus; Pina, Diana Rodrigues de

2017-05-01

The aim of the present study was to determine the efficiency of six methods for calculate the effective dose (E) that is received by health professionals during vascular interventional procedures. We evaluated the efficiency of six methods that are currently used to estimate professionals' E, based on national and international recommendations for interventional radiology. Equivalent doses on the head, neck, chest, abdomen, feet, and hands of seven professionals were monitored during 50 vascular interventional radiology procedures. Professionals' E was calculated for each procedure according to six methods that are commonly employed internationally. To determine the best method, a more efficient E calculation method was used to determine the reference value (reference E) for comparison. The highest equivalent dose were found for the hands (0.34±0.93mSv). The two methods that are described by Brazilian regulations overestimated E by approximately 100% and 200%. The more efficient method was the one that is recommended by the United States National Council on Radiological Protection and Measurements (NCRP). The mean and median differences of this method relative to reference E were close to 0%, and its standard deviation was the lowest among the six methods. The present study showed that the most precise method was the one that is recommended by the NCRP, which uses two dosimeters (one over and one under protective aprons). The use of methods that employ at least two dosimeters are more efficient and provide better information regarding estimates of E and doses for shielded and unshielded regions. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

How Accurate Are Transition States from Simulations of Enzymatic Reactions?

PubMed Central

2015-01-01

The rate expression of traditional transition state theory (TST) assumes no recrossing of the transition state (TS) and thermal quasi-equilibrium between the ground state and the TS. Currently, it is not well understood to what extent these assumptions influence the nature of the activated complex obtained in traditional TST-based simulations of processes in the condensed phase in general and in enzymes in particular. Here we scrutinize these assumptions by characterizing the TSs for hydride transfer catalyzed by the enzyme Escherichia coli dihydrofolate reductase obtained using various simulation approaches. Specifically, we compare the TSs obtained with common TST-based methods and a dynamics-based method. Using a recently developed accurate hybrid quantum mechanics/molecular mechanics potential, we find that the TST-based and dynamics-based methods give considerably different TS ensembles. This discrepancy, which could be due equilibrium solvation effects and the nature of the reaction coordinate employed and its motion, raises major questions about how to interpret the TSs determined by common simulation methods. We conclude that further investigation is needed to characterize the impact of various TST assumptions on the TS phase-space ensemble and on the reaction kinetics. PMID:24860275

Comparative policy analysis for alcohol and drugs: Current state of the field.

PubMed

Ritter, Alison; Livingston, Michael; Chalmers, Jenny; Berends, Lynda; Reuter, Peter

2016-05-01

A central policy research question concerns the extent to which specific policies produce certain effects - and cross-national (or between state/province) comparisons appear to be an ideal way to answer such a question. This paper explores the current state of comparative policy analysis (CPA) with respect to alcohol and drugs policies. We created a database of journal articles published between 2010 and 2014 as the body of CPA work for analysis. We used this database of 57 articles to clarify, extract and analyse the ways in which CPA has been defined. Quantitative and qualitative analysis of the CPA methods employed, the policy areas that have been studied, and differences between alcohol CPA and drug CPA are explored. There is a lack of clear definition as to what counts as a CPA. The two criteria for a CPA (explicit study of a policy, and comparison across two or more geographic locations), exclude descriptive epidemiology and single state comparisons. With the strict definition, most CPAs were with reference to alcohol (42%), although the most common policy to be analysed was medical cannabis (23%). The vast majority of papers undertook quantitative data analysis, with a variety of advanced statistical methods. We identified five approaches to the policy specification: classification or categorical coding of policy as present or absent; the use of an index; implied policy differences; described policy difference and data-driven policy coding. Each of these has limitations, but perhaps the most common limitation was the inability for the method to account for the differences between policy-as-stated versus policy-as-implemented. There is significant diversity in CPA methods for analysis of alcohol and drugs policy, and some substantial challenges with the currently employed methods. The absence of clear boundaries to a definition of what counts as a 'comparative policy analysis' may account for the methodological plurality but also appears to stand in the way of advancing the techniques. Copyright © 2016 Elsevier B.V. All rights reserved.

41 CFR 301-75.100 - Must we pay all of the interviewee's pre-employment interview travel expenses?

Code of Federal Regulations, 2010 CFR

2010-07-01

... interviewee's pre-employment interview travel expenses? 301-75.100 Section 301-75.100 Public Contracts and... RESPONSIBILITIES 75-PRE-EMPLOYMENT INTERVIEW TRAVEL Travel Expenses § 301-75.100 Must we pay all of the interviewee's pre-employment interview travel expenses? If you decide to pay the interviewee per diem or common...

Employment Law, Negotiation, and the Business Environment: A Cooperative Collective Bargaining Negotiation of the National Hockey League Lockout of 2004

ERIC Educational Resources Information Center

Ciocchetti, Corey A.

2008-01-01

Employment law is a "must-cover" subject in business environment courses. Comparing the plethora of topics requiring coverage with the limited time devoted to employment law during a typical academic term, other important employment subjects--such as negotiation and collective bargaining--commonly receive short shrift. This article offers a…

Pharmaceuticals in drinking water: local analysis of the problem and finding a solution through awareness.

PubMed

Leal, Julie Ehret; Thompson, Amy N; Brzezinski, Walter A

2010-01-01

To evaluate public awareness of pharmaceuticals in drinking water and to develop educational efforts to promote awareness in our community. A review of the literature was conducted to gain a full perspective of the current issue. Questionnaires, interviews, and website feedback were used to assess awareness of the problem and the most commonly used medication disposal methods. In addition, educational flyers were created to disseminate information to the public. The questionnaires were completed by a total of 96 respondents. Of respondents employed in health care, 72% had previous knowledge of pharmaceutical medications being found in our local (Charleston, SC) water supply, and of respondents not employed in health care, 54% had previous knowledge. For those with previous knowledge, 7% disposed of medications in the toilet or sink, 38% used the trash, and 36% used multiple methods. Of respondents indicating no previous knowledge, 3% disposed of medications in the toilet or sink, 35% used the trash, and 42% used multiple methods. Public awareness of pharmaceuticals in drinking water and educational efforts focusing on proper disposal of medications are essential in helping to reduce drinking water contamination.

Measurement and evaluation practices of factors that contribute to effective health promotion collaboration functioning: A scoping review.

PubMed

Stolp, Sean; Bottorff, Joan L; Seaton, Cherisse L; Jones-Bricker, Margaret; Oliffe, John L; Johnson, Steven T; Errey, Sally; Medhurst, Kerensa; Lamont, Sonia

2017-04-01

The purpose of this scoping review was to identify promising factors that underpin effective health promotion collaborations, measurement approaches, and evaluation practices. Measurement approaches and evaluation practices employed in 14 English-language articles published between January 2001 and October 2015 were considered. Data extraction included research design, health focus of the collaboration, factors being evaluated, how factors were conceptualized and measured, and outcome measures. Studies were methodologically diverse employing either quantitative methods (n=9), mixed methods (n=4), or qualitative methods (n=1). In total, these 14 studies examined 113 factors, 88 of which were only measured once. Leadership was the most commonly studied factor but was conceptualized differently across studies. Six factors were significantly associated with outcome measures across studies; leadership (n=3), gender (n=2), trust (n=2), length of the collaboration (n=2), budget (n=2) and changes in organizational model (n=2). Since factors were often conceptualized differently, drawing conclusions about their impact on collaborative functioning remains difficult. The use of reliable and validated tools would strengthen evaluation of health promotion collaborations and would support and enhance the effectiveness of collaboration. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Corrections for the geometric distortion of the tube detectors on SANS instruments at ORNL

DOE PAGES

He, Lilin; Do, Changwoo; Qian, Shuo; ...

2014-11-25

Small-angle neutron scattering instruments at the Oak Ridge National Laboratory's High Flux Isotope Reactor were upgraded in area detectors from the large, single volume crossed-wire detectors originally installed to staggered arrays of linear position-sensitive detectors (LPSDs). The specific geometry of the LPSD array requires that approaches to data reduction traditionally employed be modified. Here, two methods for correcting the geometric distortion produced by the LPSD array are presented and compared. The first method applies a correction derived from a detector sensitivity measurement performed using the same configuration as the samples are measured. In the second method, a solid angle correctionmore » is derived that can be applied to data collected in any instrument configuration during the data reduction process in conjunction with a detector sensitivity measurement collected at a sufficiently long camera length where the geometric distortions are negligible. Furthermore, both methods produce consistent results and yield a maximum deviation of corrected data from isotropic scattering samples of less than 5% for scattering angles up to a maximum of 35°. The results are broadly applicable to any SANS instrument employing LPSD array detectors, which will be increasingly common as instruments having higher incident flux are constructed at various neutron scattering facilities around the world.« less

Functionalized ZnO nanowires for microcantilever biosensors with enhanced binding capability.

PubMed

Stassi, Stefano; Chiadò, Alessandro; Cauda, Valentina; Palmara, Gianluca; Canavese, Giancarlo; Laurenti, Marco; Ricciardi, Carlo

2017-04-01

An efficient way to increase the binding capability of microcantilever biosensors is here demonstrated by growing zinc oxide nanowires (ZnO NWs) on their active surface. A comprehensive evaluation of the chemical compatibility of ZnO NWs brought to the definition of an innovative functionalization method able to guarantee the proper immobilization of biomolecules on the nanostructured surface. A noteworthy higher amount of grafted molecules was evidenced with colorimetric assays on ZnO NWs-coated devices, in comparison with functionalized and activated silicon flat samples. ZnO NWs grown on silicon microcantilever arrays and activated with the proposed immobilization strategy enhanced the sensor binding capability (and thus the dynamic range) of nearly 1 order of magnitude, with respect to the commonly employed flat functionalized silicon devices. Graphical Abstract An efficient way to increase the binding capability of microcantilever biosensors is represented by growing zinc oxide nanowires (ZnO NWs) on their active surface. ZnO NWs grown on silicon microcantilever arrays and activated with an innovative immobilization strategy enhanced the sensor binding capability of nearly 1 order of magnitude, with respect to the commonly employed flat functionalized silicon devices.

Communication rehabilitation in sub-Saharan Africa: The role of speech and language therapists.

PubMed

Wylie, Karen; McAllister, Lindy; Davidson, Bronwyn; Marshall, Julie

2018-01-01

Workforce factors present a significant barrier to the development of rehabilitation services for people with communication disabilities in sub-Saharan Africa (SSA). Exploring how the work of speech and language therapists (SLTs) in the region is organised and delivered can provide insight into existing services, areas for future workforce development and improved rehabilitation access for people with communication disability. This paper describes the employment and service provision patterns and work roles of a sample of SLTs in SSA. A broad, purpose-designed, mixed-methods survey was designed to collect data from SLTs living in Anglophone countries of SSA. Descriptive statistics and qualitative content analysis were undertaken. This paper reports on a subset of data from the wider survey. A description of the employment and work roles of the 33 respondents to the survey and characteristics of their service users is presented. SLTs were commonly employed within private and not-for-profit sectors and frequently worked in temporary jobs. SLTs engaged in a range of work roles, including capacity building and training others. Services were provided by SLTs across age ranges, health conditions and settings, with paediatric, urban services commonly reported. Costs for service users and urban-centred services give indications of barriers to service access. Knowledge of the way in which speech and language therapy services are organised and provided has the potential to shape the development of communication disability rehabilitation in SSA. This research has identified a range of issues requiring consideration as the profession develops and grows.

Partially linear mixed-effects joint models for skewed and missing longitudinal competing risks outcomes.

PubMed

Lu, Tao; Lu, Minggen; Wang, Min; Zhang, Jun; Dong, Guang-Hui; Xu, Yong

2017-12-18

Longitudinal competing risks data frequently arise in clinical studies. Skewness and missingness are commonly observed for these data in practice. However, most joint models do not account for these data features. In this article, we propose partially linear mixed-effects joint models to analyze skew longitudinal competing risks data with missingness. In particular, to account for skewness, we replace the commonly assumed symmetric distributions by asymmetric distribution for model errors. To deal with missingness, we employ an informative missing data model. The joint models that couple the partially linear mixed-effects model for the longitudinal process, the cause-specific proportional hazard model for competing risks process and missing data process are developed. To estimate the parameters in the joint models, we propose a fully Bayesian approach based on the joint likelihood. To illustrate the proposed model and method, we implement them to an AIDS clinical study. Some interesting findings are reported. We also conduct simulation studies to validate the proposed method.

76 FR 68509 - Comment Request for Information Collection for Reintegration of Ex-Offenders-Adult Reporting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... used to measure success in the RExO-Adult grants: entered employment rate, employment retention rate... of these conform to the common performance measures implemented across federal job training programs... system--how many people entered jobs; how many stayed employed; and how [[Page 68510

GEOGRAPHIC FACTORS IN EMPLOYMENT AND MANPOWER DEVELOPMENT.

ERIC Educational Resources Information Center

Department of Labor, Washington, DC.

THIS COUNTRY MUST FACE THE ECONOMIC AND SOCIAL CONSEQUENCES OF CHANGING PATTERNS OF EMPLOYMENT LOCATION WHICH RESULT FROM SHIFTING CURRENTS OF TECHNOLOGICAL CHANGE, PRODUCT DEMAND, AND JOB AND PROFIT SEEKING. ECONOMIC DEVELOPMENT PROGRAMS OF THE LAST 7 YEARS, EMPLOYING A WIDE VARIETY OF APPROACHES TO THEIR COMMON GOAL OF ECONOMIC DEVELOPMENT AND…

Is Violent Radicalisation Associated with Poverty, Migration, Poor Self-Reported Health and Common Mental Disorders?

PubMed Central

Bhui, Kamaldeep; Warfa, Nasir; Jones, Edgar

2014-01-01

Background Doctors, lawyers and criminal justice agencies need methods to assess vulnerability to violent radicalization. In synergy, public health interventions aim to prevent the emergence of risk behaviours as well as prevent and treat new illness events. This paper describes a new method of assessing vulnerability to violent radicalization, and then investigates the role of previously reported causes, including poor self-reported health, anxiety and depression, adverse life events, poverty, and migration and socio-political factors. The aim is to identify foci for preventive intervention. Methods A cross-sectional survey of a representative population sample of men and women aged 18–45, of Muslim heritage and recruited by quota sampling by age, gender, working status, in two English cities. The main outcomes include self-reported health, symptoms of anxiety and depression (common mental disorders), and vulnerability to violent radicalization assessed by sympathies for violent protest and terrorist acts. Results 2.4% of people showed some sympathy for violent protest and terrorist acts. Sympathy was more likely to be articulated by the under 20s, those in full time education rather than employment, those born in the UK, those speaking English at home, and high earners (>£75,000 a year). People with poor self-reported health were less likely to show sympathies for violent protest and terrorism. Anxiety and depressive symptoms, adverse life events and socio-political attitudes showed no associations. Conclusions Sympathies for violent protest and terrorism were uncommon among men and women, aged 18–45, of Muslim heritage living in two English cities. Youth, wealth, and being in education rather than employment were risk factors. PMID:24599058

Antifouling booster biocide extraction from marine sediments: a fast and simple method based on vortex-assisted matrix solid-phase extraction.

PubMed

Caldas, Sergiane Souza; Soares, Bruno Meira; Abreu, Fiamma; Castro, Ítalo Braga; Fillmann, Gilberto; Primel, Ednei Gilberto

2018-03-01

This paper reports the development of an analytical method employing vortex-assisted matrix solid-phase dispersion (MSPD) for the extraction of diuron, Irgarol 1051, TCMTB (2-thiocyanomethylthiobenzothiazole), DCOIT (4,5-dichloro-2-n-octyl-3-(2H)-isothiazolin-3-one), and dichlofluanid from sediment samples. Separation and determination were performed by liquid chromatography tandem-mass spectrometry. Important MSPD parameters, such as sample mass, mass of C18, and type and volume of extraction solvent, were investigated by response surface methodology. Quantitative recoveries were obtained with 2.0 g of sediment sample, 0.25 g of C18 as the solid support, and 10 mL of methanol as the extraction solvent. The MSPD method was suitable for the extraction and determination of antifouling biocides in sediment samples, with recoveries between 61 and 103% and a relative standard deviation lower than 19%. Limits of quantification between 0.5 and 5 ng g -1 were obtained. Vortex-assisted MPSD was shown to be fast and easy to use, with the advantages of low cost and reduced solvent consumption compared to the commonly employed techniques for the extraction of booster biocides from sediment samples. Finally, the developed method was applied to real samples. Results revealed that the developed extraction method is effective and simple, thus allowing the determination of biocides in sediment samples.

Quantification of methionine and selenomethionine in biological samples using multiple reaction monitoring high performance liquid chromatography tandem mass spectrometry (MRM-HPLC-MS/MS).

PubMed

Vu, Dai Long; Ranglová, Karolína; Hájek, Jan; Hrouzek, Pavel

2018-05-01

Quantification of selenated amino-acids currently relies on methods employing inductively coupled plasma mass spectrometry (ICP-MS). Although very accurate, these methods do not allow the simultaneous determination of standard amino-acids, hampering the comparison of the content of selenated versus non-selenated species such as methionine (Met) and selenomethionine (SeMet). This paper reports two approaches for the simultaneous quantification of Met and SeMet. In the first approach, standard enzymatic hydrolysis employing Protease XIV was applied for the preparation of samples. The second approach utilized methanesulfonic acid (MA) for the hydrolysis of samples, either in a reflux system or in a microwave oven, followed by derivatization with diethyl ethoxymethylenemalonate. The prepared samples were then analyzed by multiple reaction monitoring high performance liquid chromatography tandem mass spectrometry (MRM-HPLC-MS/MS). Both approaches provided platforms for the accurate determination of selenium/sulfur substitution rate in Met. Moreover the second approach also provided accurate simultaneous quantification of Met and SeMet with a low limit of detection, low limit of quantification and wide linearity range, comparable to the commonly used gas chromatography mass spectrometry (GC-MS) method or ICP-MS. The novel method was validated using certified reference material in conjunction with the GC-MS reference method. Copyright © 2018. Published by Elsevier B.V.

Retrospective analysis of two hundred thirty-five pediatric mandibular fracture cases.

PubMed

Eskitascioglu, Teoman; Ozyazgan, Irfan; Coruh, Atilla; Gunay, Galip K; Yuksel, Esabil

2009-11-01

Maxillofacial fractures are encountered less commonly during childhood period due to anatomic, social, cultural, and environmental factors. Although the incidence of all maxillofacial fractures is 1% to 15% among pediatric and adolescent patients, this rate drops to less than 1% in children below 5 years age. Two hundred thirty-five cases (

Nonhazardous Urine Pretreatment Method

NASA Technical Reports Server (NTRS)

Akse, James R.; Holtsnider, John T.

2012-01-01

A method combines solid phase acidification with two non-toxic biocides to prevent ammonia volatilization and microbial proliferation. The safe, non-oxidizing biocide combination consists of a quaternary amine and a food preservative. This combination has exhibited excellent stabilization of both acidified and unacidified urine. During pretreatment tests, composite urine collected from donors was challenged with a microorganism known to proliferate in urine, and then was processed using the nonhazardous urine pre-treatment method. The challenge microorganisms included Escherichia coli, a common gram-negative bacteria; Enterococcus faecalis, a ureolytic gram-positive bacteria; Candida albicans, a yeast commonly found in urine; and Aspergillus niger, a problematic mold that resists urine pre-treatment. Urine processed in this manner remained microbially stable for over 57 days. Such effective urine stabilization was achieved using non-toxic, non-oxidizing biocides at higher pH (3.6 to 5.8) than previous methods in use or projected for use aboard the International Space Station (ISS). ISS urine pretreatment methods employ strong oxidants including ozone and hexavalent chromium (Cr(VI)), a carcinogenic material, under very acidic conditions (pH = 1.8 to 2.4). The method described here offers a much more benign chemical environment than previous pretreatment methods, and will lower equivalent system mass (ESM) by reducing containment volume and mass, system complexity, and crew time needed to handle pre-treatment chemicals. The biocides, being non-oxidizing, minimize the potential for chemical reactions with urine constituents to produce volatile, airborne contaminants such as cyanogen chloride. Additionally, the biocides are active under significantly less acidic conditions than those used in the current system, thereby reducing the degree of required acidification. A simple flow-through solid phase acidification (SPA) bed is employed to overcome the natural buffering capacity of urine, and to lower the pH to levels that fix ammoniacal nitrogen in the non-volatile and highly water soluble NH4 + form. Citric acid, a highly soluble, solid tricarboxylic acid essential to cellular metabolism, and typically used as a food preservative, has also been shown to efficiently acidify urine in conjunction with non-oxidizing biocides to provide effective stabilization with respect to both microbial growth and ammonia volatilization.

Common Core Implementation Decisions Made by Principals in Elementary Schools

ERIC Educational Resources Information Center

Norman, Alexis Cienfuegos

2016-01-01

The purpose of this study was to understand the decisions elementary principals have made during the Common Core State Standards reform. Specifically, (a) what decisions principals have made to support Common Core implementation, (b) what strategies elementary principals have employed to communicate with stakeholders about Common Core State…

Real-Time and High-Resolution 3D Face Measurement via a Smart Active Optical Sensor.

PubMed

You, Yong; Shen, Yang; Zhang, Guocai; Xing, Xiuwen

2017-03-31

The 3D measuring range and accuracy in traditional active optical sensing, such as Fourier transform profilometry, are influenced by the zero frequency of the captured patterns. The phase-shifting technique is commonly applied to remove the zero component. However, this phase-shifting method must capture several fringe patterns with phase difference, thereby influencing the real-time performance. This study introduces a smart active optical sensor, in which a composite pattern is utilized. The composite pattern efficiently combines several phase-shifting fringes and carrier frequencies. The method can remove zero frequency by using only one pattern. Model face reconstruction and human face measurement were employed to study the validity and feasibility of this method. Results show no distinct decrease in the precision of the novel method unlike the traditional phase-shifting method. The texture mapping technique was utilized to reconstruct a nature-appearance 3D digital face.

Real-Time and High-Resolution 3D Face Measurement via a Smart Active Optical Sensor

PubMed Central

You, Yong; Shen, Yang; Zhang, Guocai; Xing, Xiuwen

2017-01-01

The 3D measuring range and accuracy in traditional active optical sensing, such as Fourier transform profilometry, are influenced by the zero frequency of the captured patterns. The phase-shifting technique is commonly applied to remove the zero component. However, this phase-shifting method must capture several fringe patterns with phase difference, thereby influencing the real-time performance. This study introduces a smart active optical sensor, in which a composite pattern is utilized. The composite pattern efficiently combines several phase-shifting fringes and carrier frequencies. The method can remove zero frequency by using only one pattern. Model face reconstruction and human face measurement were employed to study the validity and feasibility of this method. Results show no distinct decrease in the precision of the novel method unlike the traditional phase-shifting method. The texture mapping technique was utilized to reconstruct a nature-appearance 3D digital face. PMID:28362349

Evaluation of shrinkage and cracking in concrete of ring test by acoustic emission method

NASA Astrophysics Data System (ADS)

Watanabe, Takeshi; Hashimoto, Chikanori

2015-03-01

Drying shrinkage of concrete is one of the typical problems related to reduce durability and defilation of concrete structures. Lime stone, expansive additive and low-heat Portland cement are used to reduce drying shrinkage in Japan. Drying shrinkage is commonly evaluated by methods of measurement for length change of mortar and concrete. In these methods, there is detected strain due to drying shrinkage of free body, although visible cracking does not occur. In this study, the ring test was employed to detect strain and age cracking of concrete. The acoustic emission (AE) method was adopted to detect micro cracking due to shrinkage. It was recognized that in concrete using lime stone, expansive additive and low-heat Portland cement are effective to decrease drying shrinkage and visible cracking. Micro cracking due to shrinkage of this concrete was detected and evaluated by the AE method.

Copper-Catalyzed Chan-Lam Cyclopropylation of Phenols and Azaheterocycles.

PubMed

Derosa, Joseph; O'Duill, Miriam L; Holcomb, Matthew; Boulous, Mark N; Patman, Ryan L; Wang, Fen; Tran-Dubé, Michelle; McAlpine, Indrawan; Engle, Keary M

2018-04-06

Small molecules containing cyclopropane-heteroatom linkages are commonly needed in medicinal chemistry campaigns yet are problematic to prepare using existing methods. To address this issue, a scalable Chan-Lam cyclopropylation reaction using potassium cyclopropyl trifluoroborate has been developed. With phenol nucleophiles, the reaction effects O-cyclopropylation, whereas with 2-pyridones, 2-hydroxybenzimidazoles, and 2-aminopyridines the reaction brings about N-cyclopropylation. The transformation is catalyzed by Cu(OAc) 2 and 1,10-phenanthroline and employs 1 atm of O 2 as the terminal oxidant. This method is operationally convenient to perform and provides a simple, strategic disconnection toward the synthesis of cyclopropyl aryl ethers and cyclopropyl amine derivatives bearing an array of functional groups.

A Selective-Echo Method for Chemical-Shift Imaging of Two-Component Systems

NASA Astrophysics Data System (ADS)

Gerald, Rex E., II; Krasavin, Anatoly O.; Botto, Robert E.

A simple and effective method for selectively imaging either one of two chemical species in a two-component system is presented and demonstrated experimentally. The pulse sequence employed, selective- echo chemical- shift imaging (SECSI), is a hybrid (frequency-selective/ T1-contrast) technique that is executed in a short period of time, utilizes the full Boltzmann magnetization of each chemical species to form the corresponding image, and requires only hard pulses of quadrature phase. This approach provides a direct and unambiguous representation of the spatial distribution of the two chemical species. In addition, the performance characteristics and the advantages of the SECSI sequence are compared on a common basis to those of other pulse sequences.

Emerging Applications for High K Materials in VLSI Technology

PubMed Central

Clark, Robert D.

2014-01-01

The current status of High K dielectrics in Very Large Scale Integrated circuit (VLSI) manufacturing for leading edge Dynamic Random Access Memory (DRAM) and Complementary Metal Oxide Semiconductor (CMOS) applications is summarized along with the deposition methods and general equipment types employed. Emerging applications for High K dielectrics in future CMOS are described as well for implementations in 10 nm and beyond nodes. Additional emerging applications for High K dielectrics include Resistive RAM memories, Metal-Insulator-Metal (MIM) diodes, Ferroelectric logic and memory devices, and as mask layers for patterning. Atomic Layer Deposition (ALD) is a common and proven deposition method for all of the applications discussed for use in future VLSI manufacturing. PMID:28788599

A general method for copper-catalyzed arene cross-dimerization.

PubMed

Do, Hien-Quang; Daugulis, Olafs

2011-08-31

A general method for a highly regioselective copper-catalyzed cross-coupling of two aromatic compounds using iodine as an oxidant has been developed. The reactions involve an initial iodination of one arene followed by arylation of the most acidic C-H bond of the other coupling component. Cross-coupling of electron-rich arenes, electron-poor arenes, and five- and six-membered heterocycles is possible in many combinations. Typically, a 1/1.5 to 1/3 ratio of coupling components is used, in contrast to existing methodology that often employs a large excess of one of the arenes. Common functionalities such as ester, ketone, aldehyde, ether, nitrile, nitro, and amine are well-tolerated.

A General Method for Copper-Catalyzed Arene Cross-Dimerization

PubMed Central

Do, Hien-Quang; Daugulis, Olafs

2011-01-01

A general method for a highly regioselective, copper-catalyzed cross-coupling of two aromatic compounds by using iodine oxidant has been developed. The reactions involve an initial iodination of one arene followed by arylation of the most acidic C-H bond of the other coupling component. Cross-coupling of electron-rich arenes, electron-poor arenes, five- and six-membered heterocycles is possible in many combinations. Typically, 1/1.5 to 1/3 ratio of coupling components is used in contrast to existing methodology that often employs a large excess of one of the arenes. Common functionalities such as ester, ketone, aldehyde, ether, nitrile, nitro, and amine are well-tolerated. PMID:21823581

RNA interactome capture in yeast.

PubMed

Beckmann, Benedikt M

2017-04-15

RNA-binding proteins (RBPs) are key players in post-transcriptional regulation of gene expression in eukaryotic cells. To be able to unbiasedly identify RBPs in Saccharomyces cerevisiae, we developed a yeast RNA interactome capture protocol which employs RNA labeling, covalent UV crosslinking of RNA and proteins at 365nm wavelength (photoactivatable-ribonucleoside-enhanced crosslinking, PAR-CL) and finally purification of the protein-bound mRNA. The method can be easily implemented in common workflows and takes about 3days to complete. Next to a comprehensive explanation of the method, we focus on our findings about the choice of crosslinking in yeast and discuss the rationale of individual steps in the protocol. Copyright © 2016. Published by Elsevier Inc.

Information geometry and its application to theoretical statistics and diffusion tensor magnetic resonance imaging

NASA Astrophysics Data System (ADS)

Wisniewski, Nicholas Andrew

This dissertation is divided into two parts. First we present an exact solution to a generalization of the Behrens-Fisher problem by embedding the problem in the Riemannian manifold of Normal distributions. From this we construct a geometric hypothesis testing scheme. Secondly we investigate the most commonly used geometric methods employed in tensor field interpolation for DT-MRI analysis and cardiac computer modeling. We computationally investigate a class of physiologically motivated orthogonal tensor invariants, both at the full tensor field scale and at the scale of a single interpolation by doing a decimation/interpolation experiment. We show that Riemannian-based methods give the best results in preserving desirable physiological features.

Functional assessment of the ex vivo vocal folds through biomechanical testing: A review

PubMed Central

Dion, Gregory R.; Jeswani, Seema; Roof, Scott; Fritz, Mark; Coelho, Paulo; Sobieraj, Michael; Amin, Milan R.; Branski, Ryan C.

2016-01-01

The human vocal folds are complex structures made up of distinct layers that vary in cellular and extracellular composition. The mechanical properties of vocal fold tissue are fundamental to the study of both the acoustics and biomechanics of voice production. To date, quantitative methods have been applied to characterize the vocal fold tissue in both normal and pathologic conditions. This review describes, summarizes, and discusses the most commonly employed methods for vocal fold biomechanical testing. Force-elongation, torsional parallel plate rheometry, simple-shear parallel plate rheometry, linear skin rheometry, and indentation are the most frequently employed biomechanical tests for vocal fold tissues and each provide material properties data that can be used to compare native tissue verses diseased for treated tissue. Force-elongation testing is clinically useful, as it allows for functional unit testing, while rheometry provides physiologically relevant shear data, and nanoindentation permits micrometer scale testing across different areas of the vocal fold as well as whole organ testing. Thoughtful selection of the testing technique during experimental design to evaluate a hypothesis is important to optimizing biomechanical testing of vocal fold tissues. PMID:27127075

Simulation of Bacillus subtilis biofilm growth on agar plate by diffusion-reaction based continuum model

NASA Astrophysics Data System (ADS)

Zhang, Xianlong; Wang, Xiaoling; Nie, Kai; Li, Mingpeng; Sun, Qingping

2016-08-01

Various species of bacteria form highly organized spatially-structured aggregates known as biofilms. To understand how microenvironments impact biofilm growth dynamics, we propose a diffusion-reaction continuum model to simulate the formation of Bacillus subtilis biofilm on an agar plate. The extended finite element method combined with level set method are employed to perform the simulation, numerical results show the quantitative relationship between colony morphologies and nutrient depletion over time. Considering that the production of polysaccharide in wild-type cells may enhance biofilm spreading on the agar plate, we inoculate mutant colony incapable of producing polysaccharide to verify our results. Predictions of the glutamate source biofilm’s shape parameters agree with the experimental mutant colony better than that of glycerol source biofilm, suggesting that glutamate is rate limiting nutrient for Bacillus subtilis biofilm growth on agar plate, and the diffusion-limited is a better description to the experiment. In addition, we find that the diffusion time scale is of the same magnitude as growth process, and the common-employed quasi-steady approximation is not applicable here.

Simulation of Bacillus subtilis biofilm growth on agar plate by diffusion-reaction based continuum model.

PubMed

Zhang, Xianlong; Wang, Xiaoling; Nie, Kai; Li, Mingpeng; Sun, Qingping

2016-07-19

Various species of bacteria form highly organized spatially-structured aggregates known as biofilms. To understand how microenvironments impact biofilm growth dynamics, we propose a diffusion-reaction continuum model to simulate the formation of Bacillus subtilis biofilm on an agar plate. The extended finite element method combined with level set method are employed to perform the simulation, numerical results show the quantitative relationship between colony morphologies and nutrient depletion over time. Considering that the production of polysaccharide in wild-type cells may enhance biofilm spreading on the agar plate, we inoculate mutant colony incapable of producing polysaccharide to verify our results. Predictions of the glutamate source biofilm's shape parameters agree with the experimental mutant colony better than that of glycerol source biofilm, suggesting that glutamate is rate limiting nutrient for Bacillus subtilis biofilm growth on agar plate, and the diffusion-limited is a better description to the experiment. In addition, we find that the diffusion time scale is of the same magnitude as growth process, and the common-employed quasi-steady approximation is not applicable here.

Exploring the relationship between employer recordkeeping and underreporting in the BLS Survey of Occupational Injuries and Illnesses

PubMed Central

Wuellner, Sara E; Bonauto, David K

2014-01-01

Background Little empirical data exist to identify the reasons for underreporting in the US Bureau of Labor Statistics (BLS) non-fatal occupational injury and illness data. Methods We interviewed occupational injury and illness record keepers from Washington State establishments that participated in the 2008 BLS Survey of Occupational Injuries and Illnesses (SOII). Qualitative and quantitative methods were used to explore recordkeeping and business practices that may explain SOII's incomplete case capture compared with WC claims data. Results Most participants (90%) did not comply with OSHA recordkeeping regulations. Other factors including using workplace injury data to evaluate supervisors' or SOII respondent's job performance, recording injuries for a worksite that operates multiple shifts, and failing to follow SOII instructions were more common among establishments with unreported WC claims. Conclusion Business practices that incentivize low injury rates, disorganized recordkeeping, and limited communication between BLS and survey respondents are barriers to accurate employer reports of work-related injuries and illnesses. Am. J. Ind. Med. 57:1133–1143, 2014. © 2014 The Authors. American Journal of Industrial Medicine published by Wiley Periodicals, Inc. PMID:25099477

Rapid fabrication of microfluidic chips based on the simplest LED lithography

NASA Astrophysics Data System (ADS)

Li, Yue; Wu, Ping; Luo, Zhaofeng; Ren, Yuxuan; Liao, Meixiang; Feng, Lili; Li, Yuting; He, Liqun

2015-05-01

Microfluidic chips are generally fabricated by a soft lithography method employing commercial lithography equipment. These heavy machines require a critical room environment and high lamp power, and the cost remains too high for most normal laboratories. Here we present a novel microfluidics fabrication method utilizing a portable ultraviolet (UV) LED as an alternative UV source for photolithography. With this approach, we can repeat several common microchannels as do these conventional commercial exposure machines, and both the verticality of the channel sidewall and lithography resolution are proved to be acceptable. Further microfluidics applications such as mixing, blood typing and microdroplet generation are implemented to validate the practicability of the chips. This simple but innovative method decreases the cost and requirement of chip fabrication dramatically and may be more popular with ordinary laboratories.

Reserve growth of oil and gas fields—Investigations and applications

USGS Publications Warehouse

Cook, Troy A.

2013-01-01

The reserve growth of fields has been a topic for ongoing discussion for over half a century and will continue to be studied well into the future. This is due to the expected size of the volumetric contribution of reserve growth to the future supply of oil and natural gas. Understanding past methods of estimating future volumes based on the data assembly methods that have been used can lead to a better understanding of their applicability. The statistical nature of past methods and the (1) possible high level of dependency on a limited number of fields, (2) assumption of an age-based correlation with effective reserve growth, and (3) assumption of long-lived and more common than not reserve growth, may be improved by employing a more geologically based approach.

Using Classification and Regression Trees (CART) and random forests to analyze attrition: Results from two simulations.

PubMed

Hayes, Timothy; Usami, Satoshi; Jacobucci, Ross; McArdle, John J

2015-12-01

In this article, we describe a recent development in the analysis of attrition: using classification and regression trees (CART) and random forest methods to generate inverse sampling weights. These flexible machine learning techniques have the potential to capture complex nonlinear, interactive selection models, yet to our knowledge, their performance in the missing data analysis context has never been evaluated. To assess the potential benefits of these methods, we compare their performance with commonly employed multiple imputation and complete case techniques in 2 simulations. These initial results suggest that weights computed from pruned CART analyses performed well in terms of both bias and efficiency when compared with other methods. We discuss the implications of these findings for applied researchers. (c) 2015 APA, all rights reserved).

Pediatric Awake Craniotomy for Brain Lesions.

PubMed

Akay, Ali; Rükşen, Mete; Çetin, H Yurday; Seval, H Özer; İşlekel, Sertaç

2016-01-01

Awake craniotomy is a special method to prevent motor deficits during the resection of lesions that are located in, or close to, functional areas. Although it is more commonly performed in adult patients, reports of pediatric cases undergoing awake craniotomy are limited in the literature. In our clinic, where we frequently use awake craniotomy in adult patients, we performed this method in 2 selected pediatric cases for lesion surgery. At an early age, these 2 cases diagnosed with epilepsy presented cerebral lesions, but since the lesions enclosed functional areas, surgical resection was not regarded as a treatment option at this time. In these 2 pediatric cases, we successfully completed lesion surgery with awake craniotomy. The method and the techniques employed during surgery are presented concomitant with other reports in the literature. © 2016 S. Karger AG, Basel.

MALDI Imaging Mass Spectrometry—A Mini Review of Methods and Recent Developments

PubMed Central

Eriksson, Cecilia; Masaki, Noritaka; Yao, Ikuko; Hayasaka, Takahiro; Setou, Mitsutoshi

2013-01-01

As the only imaging method available, Imaging Mass Spectrometry (IMS) can determine both the identity and the distribution of hundreds of molecules on tissue sections, all in one single run. IMS is becoming an established research technology, and due to recent technical and methodological improvements the interest in this technology is increasing steadily and within a wide range of scientific fields. Of the different IMS methods available, matrix-assisted laser desorption/ionization (MALDI) IMS is the most commonly employed. The course at IMSC 2012 in Kyoto covered the fundamental principles and techniques of MALDI-IMS, assuming no previous experience in IMS. This mini review summarizes the content of the one-day course and describes some of the most recent work performed within this research field. PMID:24349941

COMPUTATIONAL METHODOLOGIES for REAL-SPACE STRUCTURAL REFINEMENT of LARGE MACROMOLECULAR COMPLEXES

PubMed Central

Goh, Boon Chong; Hadden, Jodi A.; Bernardi, Rafael C.; Singharoy, Abhishek; McGreevy, Ryan; Rudack, Till; Cassidy, C. Keith; Schulten, Klaus

2017-01-01

The rise of the computer as a powerful tool for model building and refinement has revolutionized the field of structure determination for large biomolecular systems. Despite the wide availability of robust experimental methods capable of resolving structural details across a range of spatiotemporal resolutions, computational hybrid methods have the unique ability to integrate the diverse data from multimodal techniques such as X-ray crystallography and electron microscopy into consistent, fully atomistic structures. Here, commonly employed strategies for computational real-space structural refinement are reviewed, and their specific applications are illustrated for several large macromolecular complexes: ribosome, virus capsids, chemosensory array, and photosynthetic chromatophore. The increasingly important role of computational methods in large-scale structural refinement, along with current and future challenges, is discussed. PMID:27145875

Using Classification and Regression Trees (CART) and Random Forests to Analyze Attrition: Results From Two Simulations

PubMed Central

Hayes, Timothy; Usami, Satoshi; Jacobucci, Ross; McArdle, John J.

2016-01-01

In this article, we describe a recent development in the analysis of attrition: using classification and regression trees (CART) and random forest methods to generate inverse sampling weights. These flexible machine learning techniques have the potential to capture complex nonlinear, interactive selection models, yet to our knowledge, their performance in the missing data analysis context has never been evaluated. To assess the potential benefits of these methods, we compare their performance with commonly employed multiple imputation and complete case techniques in 2 simulations. These initial results suggest that weights computed from pruned CART analyses performed well in terms of both bias and efficiency when compared with other methods. We discuss the implications of these findings for applied researchers. PMID:26389526

Working Alliance and Stages of Change for Employment: The Intermediary Role of Autonomous Motivation, Outcome Expectancy and Vocational Rehabilitation Engagement.

PubMed

Iwanaga, Kanako; Chan, Fong; Tansey, Timothy N; Strauser, David; Ritter, Ellen; Bishop, Malachy; Brooks, Jessica

2018-05-30

Purpose Working alliance is one of the most important common factors for successful counseling/psychotherapy outcomes. Based on the empirical literature about working alliance, it seems that self-determination and self-efficacy theory (SDT/SET) can potentially be used as a motivational model to explain the relationship between working alliance and vocational rehabilitation (VR) outcomes. The purpose of this study is to evaluate three primary SDT/SET constructs, autonomous motivation, expectancy and engagement, as mediators for the relationship between working alliance and stages of change (SOC) for employment. Methods A serial multiple mediation analysis (SMMA) was computed to evaluate autonomy, outcome expectancy, and VR engagement as mediators of the relationship between working alliance and SOC for employment in a sample of 277 people with chronic illness and disability (CID) receiving services from state VR agencies in the United States. Results The SMMA results indicated that working alliance was positively associated with SOC for employment (total effect), while the direct effect between working alliance and SOC for employment was not significant after controlling for the effects of the mediators, indicating significant mediation effects. The mediation effects were estimates of the indirect effects for working alliance on SOC for employment through (a) autonomous motivation, (b) outcome expectancy, (c) VR engagement, and (d) autonomous motivation, outcome expectancy and VR engagement together. Conclusions The results indicated that a strong working alliance has the benefit of helping consumers develop autonomous motivation to work and increasing their vocational outcome expectancy and engagement in VR services, leading to employment.

Common spatial pattern combined with kernel linear discriminate and generalized radial basis function for motor imagery-based brain computer interface applications

NASA Astrophysics Data System (ADS)

Hekmatmanesh, Amin; Jamaloo, Fatemeh; Wu, Huapeng; Handroos, Heikki; Kilpeläinen, Asko

2018-04-01

Brain Computer Interface (BCI) can be a challenge for developing of robotic, prosthesis and human-controlled systems. This work focuses on the implementation of a common spatial pattern (CSP) base algorithm to detect event related desynchronization patterns. Utilizing famous previous work in this area, features are extracted by filter bank with common spatial pattern (FBCSP) method, and then weighted by a sensitive learning vector quantization (SLVQ) algorithm. In the current work, application of the radial basis function (RBF) as a mapping kernel of linear discriminant analysis (KLDA) method on the weighted features, allows the transfer of data into a higher dimension for more discriminated data scattering by RBF kernel. Afterwards, support vector machine (SVM) with generalized radial basis function (GRBF) kernel is employed to improve the efficiency and robustness of the classification. Averagely, 89.60% accuracy and 74.19% robustness are achieved. BCI Competition III, Iva data set is used to evaluate the algorithm for detecting right hand and foot imagery movement patterns. Results show that combination of KLDA with SVM-GRBF classifier makes 8.9% and 14.19% improvements in accuracy and robustness, respectively. For all the subjects, it is concluded that mapping the CSP features into a higher dimension by RBF and utilization GRBF as a kernel of SVM, improve the accuracy and reliability of the proposed method.

5 CFR 3601.107 - Prior approval for outside employment and business activities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... or other financial relationship not involving the provision of personal services by the DoD employee... common stock, that is available to the general public; (2) Employment. Any form of non-Federal employment or business relationship involving the provision of personal services by the DoD employee. It...

5 CFR 3601.107 - Prior approval for outside employment and business activities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... or other financial relationship not involving the provision of personal services by the DoD employee... common stock, that is available to the general public; (2) Employment. Any form of non-Federal employment or business relationship involving the provision of personal services by the DoD employee. It...

The Mentally Retarded Worker: An Economic Discovery. Report to the President. 14th Annual Report.

ERIC Educational Resources Information Center

President's Committee on Mental Retardation, Washington, DC.

The booklet examines potential contributions that can be made by mentally retarded workers and exposes common misconceptions about their employability. Initial sections introduce the nature of retardation and describe real-life situations showing economic benefits of employment to employers, taxpayers, and retarded persons themselves. Among the…

Categorisation of visualisation methods to support the design of Human-Computer Interaction Systems.

PubMed

Li, Katie; Tiwari, Ashutosh; Alcock, Jeffrey; Bermell-Garcia, Pablo

2016-07-01

During the design of Human-Computer Interaction (HCI) systems, the creation of visual artefacts forms an important part of design. On one hand producing a visual artefact has a number of advantages: it helps designers to externalise their thought and acts as a common language between different stakeholders. On the other hand, if an inappropriate visualisation method is employed it could hinder the design process. To support the design of HCI systems, this paper reviews the categorisation of visualisation methods used in HCI. A keyword search is conducted to identify a) current HCI design methods, b) approaches of selecting these methods. The resulting design methods are filtered to create a list of just visualisation methods. These are then categorised using the approaches identified in (b). As a result 23 HCI visualisation methods are identified and categorised in 5 selection approaches (The Recipient, Primary Purpose, Visual Archetype, Interaction Type, and The Design Process). Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Common symptoms in middle aged women: their relation to employment status, psychosocial work conditions and social support in a Swedish setting.

PubMed

Krantz, G; Ostergren, P O

2000-03-01

Over the past few decades there has been a growing interest among researchers, in women's overall life circumstances and their relation to women's health status. For example, paid employment has been considered an important part of women's living conditions in Western societies as the number of women entering the labour market has grown constantly over the past decades. When comparing men's and women's health, one of the most consistent findings is a higher rate of symptoms among women. The most commonly reported symptoms in women are depressive symptoms, symptoms of bodily tension and chronic pain from muscles and joints. The aim of this study was to investigate whether socioeconomic factors, employment status, psychosocial work conditions and social network/support are associated with middle aged women's health status in terms of common symptoms. A mailed questionnaire was used in a cross sectional design assessing socioeconomic factors, employment status, psychosocial work conditions according to the demand/control model, social network/support and an index based on the 15 most frequent symptoms presented by middle aged women when seeking health care. A rural community with 13,200 inhabitants in the western part of Sweden. Women were randomly selected from the general population in the study area, 40 to 50 years of age. The response rate was 81.7 per cent. Women who were non-employed had a significantly increased odds of a high level of common symptoms (OR = 2.82; 95% confidence intervals 1.69, 4.70), as well as women exposed to job strain (OR = 3.27; 1.92, 5.57), independently of the level of social network/support. Furthermore, exposure to low social support, low social anchorage or low social participation independently showed significantly increased odds of a high level of common symptoms (OR = 2.75; 1.71, 4.42; OR = 2.91; 1.81, 4.69 and OR = 1.69; 1.10, 2.61, respectively). Work related factors, such as non-employment and job strain, and circumstances within the private sphere, such as social network/support, seem equally important for middle aged women's health status. These findings ought to have important policy implications and also to be of major importance in a primary health care setting when meeting women who seek health care because of common symptoms.

Stepper motor

NASA Technical Reports Server (NTRS)

Dekramer, Cornelis

1994-01-01

The purpose of this document is to describe the more commonly used permanent magnet stepper motors for spaceflight. It will discuss the mechanical and electrical aspects of the devices, their torque behavior, those parameters which need to be controlled and measured, and test methods to be employed. It will also discuss torque margins, compare these to the existing margin requirements, and determine the applicability of these requirements. Finally it will attempt to generate a set of requirements which will be used in any stepper motor procurement and will fully characterize the stepper motor behavior in a consistent and repeatable fashion.

Importance of elastic finite-size effects: Neutral defects in ionic compounds

DOE PAGES

Burr, P. A.; Cooper, M. W. D.

2017-09-15

Small system sizes are a well known source of error in DFT calculations, yet computational constraints frequently dictate the use of small supercells, often as small as 96 atoms in oxides and compound semiconductors. In ionic compounds, electrostatic finite size effects have been well characterised, but self-interaction of charge neutral defects is often discounted or assumed to follow an asymptotic behaviour and thus easily corrected with linear elastic theory. Here we show that elastic effect are also important in the description of defects in ionic compounds and can lead to qualitatively incorrect conclusions if inadequatly small supercells are used; moreover,more » the spurious self-interaction does not follow the behaviour predicted by linear elastic theory. Considering the exemplar cases of metal oxides with fluorite structure, we show that numerous previous studies, employing 96-atom supercells, misidentify the ground state structure of (charge neutral) Schottky defects. We show that the error is eliminated by employing larger cells (324, 768 and 1500 atoms), and careful analysis determines that elastic effects, not electrostatic, are responsible. The spurious self-interaction was also observed in non-oxide ionic compounds and irrespective of the computational method used, thereby resolving long standing discrepancies between DFT and force-field methods, previously attributed to the level of theory. The surprising magnitude of the elastic effects are a cautionary tale for defect calculations in ionic materials, particularly when employing computationally expensive methods (e.g. hybrid functionals) or when modelling large defect clusters. We propose two computationally practicable methods to test the magnitude of the elastic self-interaction in any ionic system. In commonly studies oxides, where electrostatic effects would be expected to be dominant, it is the elastic effects that dictate the need for larger supercells | greater than 96 atoms.« less

Importance of elastic finite-size effects: Neutral defects in ionic compounds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burr, P. A.; Cooper, M. W. D.

Small system sizes are a well known source of error in DFT calculations, yet computational constraints frequently dictate the use of small supercells, often as small as 96 atoms in oxides and compound semiconductors. In ionic compounds, electrostatic finite size effects have been well characterised, but self-interaction of charge neutral defects is often discounted or assumed to follow an asymptotic behaviour and thus easily corrected with linear elastic theory. Here we show that elastic effect are also important in the description of defects in ionic compounds and can lead to qualitatively incorrect conclusions if inadequatly small supercells are used; moreover,more » the spurious self-interaction does not follow the behaviour predicted by linear elastic theory. Considering the exemplar cases of metal oxides with fluorite structure, we show that numerous previous studies, employing 96-atom supercells, misidentify the ground state structure of (charge neutral) Schottky defects. We show that the error is eliminated by employing larger cells (324, 768 and 1500 atoms), and careful analysis determines that elastic effects, not electrostatic, are responsible. The spurious self-interaction was also observed in non-oxide ionic compounds and irrespective of the computational method used, thereby resolving long standing discrepancies between DFT and force-field methods, previously attributed to the level of theory. The surprising magnitude of the elastic effects are a cautionary tale for defect calculations in ionic materials, particularly when employing computationally expensive methods (e.g. hybrid functionals) or when modelling large defect clusters. We propose two computationally practicable methods to test the magnitude of the elastic self-interaction in any ionic system. In commonly studies oxides, where electrostatic effects would be expected to be dominant, it is the elastic effects that dictate the need for larger supercells | greater than 96 atoms.« less

Importance of elastic finite-size effects: Neutral defects in ionic compounds

NASA Astrophysics Data System (ADS)

Burr, P. A.; Cooper, M. W. D.

2017-09-01

Small system sizes are a well-known source of error in density functional theory (DFT) calculations, yet computational constraints frequently dictate the use of small supercells, often as small as 96 atoms in oxides and compound semiconductors. In ionic compounds, electrostatic finite-size effects have been well characterized, but self-interaction of charge-neutral defects is often discounted or assumed to follow an asymptotic behavior and thus easily corrected with linear elastic theory. Here we show that elastic effects are also important in the description of defects in ionic compounds and can lead to qualitatively incorrect conclusions if inadequately small supercells are used; moreover, the spurious self-interaction does not follow the behavior predicted by linear elastic theory. Considering the exemplar cases of metal oxides with fluorite structure, we show that numerous previous studies, employing 96-atom supercells, misidentify the ground-state structure of (charge-neutral) Schottky defects. We show that the error is eliminated by employing larger cells (324, 768, and 1500 atoms), and careful analysis determines that elastic, not electrostatic, effects are responsible. The spurious self-interaction was also observed in nonoxide ionic compounds irrespective of the computational method used, thereby resolving long-standing discrepancies between DFT and force-field methods, previously attributed to the level of theory. The surprising magnitude of the elastic effects is a cautionary tale for defect calculations in ionic materials, particularly when employing computationally expensive methods (e.g., hybrid functionals) or when modeling large defect clusters. We propose two computationally practicable methods to test the magnitude of the elastic self-interaction in any ionic system. In commonly studied oxides, where electrostatic effects would be expected to be dominant, it is the elastic effects that dictate the need for larger supercells: greater than 96 atoms.

Loss of permanent employment and its association with suicidal ideation: a cohort study in South Korea.

PubMed

Yoon, Seohyun; Kim, Ja Young; Park, Jooyoung; Kim, Seung-Sup

2017-09-01

Objective Precarious employment is associated with worse mental health, but it is unclear whether changes in employment status are related to suicidal behaviors. This study examined the association between change in employment status and suicidal ideation among workers in South Korea. Methods To maximize power of the analysis, we combined data from the ongoing Korean Welfare Panel Study. We analyzed 3793 participants who were permanent workers at baseline (2011-2014) and who either: (i) maintained permanent employment; (ii) became a full-time precarious worker; (iii) became a part-time precarious worker; or (iv) became unemployed in the following year (2012-2015). Suicidal ideation was assessed annually by asking participants, "Have you ever seriously thought about dying by suicide in the past year?" Logistic regression was applied to examine associations between change in employment status and suicidal ideation, adjusting for potential confounders such as lifetime suicidal ideation and depressive symptoms at baseline. Results Participants who became part-time precarious workers were more likely to have suicidal ideation [odd ratio (OR) 2.37, 95% confidence interval (95% CI) 1.07-5.25, P=0.033] compared to those who remained permanent workers. In analysis restricted to workers who never previously thought about dying by suicide, suicidal ideation was more common among those who became either full-time (OR 2.33, 95% CI 1.09-4.99, P=0.029) or part-time (OR 3.94, 95% CI 1.46-10.64, P=0.007) precarious workers. Conclusions Our findings suggest that change in employment status from permanent to precarious employment may increase suicidal ideation among workers in South Korea.

Development of guidelines to assist organisations to support employees returning to work after an episode of anxiety, depression or a related disorder: a Delphi consensus study with Australian professionals and consumers

PubMed Central

2012-01-01

Background Mental disorders are a significant cause of disability and loss of workplace productivity. The scientific evidence for how organisations should best support those returning to work after common mental disorders is relatively limited. Therefore a Delphi expert consensus study was carried out with professional and consumer experts. Methods A systematic review of websites, books and journal articles was conducted to develop a 387 item survey containing strategies that organisations might use to support those returning to work after common mental disorders. Three panels of Australian experts (66 health professionals, 30 employers and 80 consumers) were recruited and independently rated the items over three rounds, with strategies reaching consensus on importance written into the guidelines. Results The participation rate across all three rounds was 60.2% (57.6% health professionals, 76.7% employers, 56.3% consumers). 308 strategies were endorsed as essential or important by at least 80% of all three panels. The endorsed strategies provided information on policy and procedures, the roles of supervisors, employees and colleagues in managing absence and return to work, and provision of mental health information and training. Conclusions The guidelines outline strategies for organisations supporting those returning to work after common mental disorders. It is hoped that they may be used to inform policy and practice in a variety of workplaces. PMID:22943604

Diversity in parasitic helminths of Australasian marsupials and monotremes: a molecular perspective.

PubMed

Beveridge, Ian; Gasser, Robin B

2014-10-15

Marsupials and monotremes are a prominent part of the mammalian fauna in Australia, and harbour an extremely diverse and highly distinctive array of helminth parasites. Their study has been relatively neglected, likely because they have no direct, adverse socioeconomic impact. As the body plans of helminths generally are very simple and morphological characterisation likely underestimates true diversity, molecular tools have been employed to assess genetic diversity. Using biochemical and/or molecular methods, recent studies show extensive diversity in helminths of marsupials, with cryptic species being commonly encountered. The purpose of this article is to review current knowledge about the diversity of parasitic helminths of marsupials and monotremes, to raise questions as to whether current molecular data can be used to estimate diversity, what mechanisms lead to such diversity, to critically appraise the molecular tools that have been employed thus far to explore diversity and to discuss the directions which might be taken in the future employing improved techniques. Copyright © 2014 Australian Society for Parasitology Inc. Published by Elsevier Ltd. All rights reserved.

Reduction of bias and variance for evaluation of computer-aided diagnostic schemes.

PubMed

Li, Qiang; Doi, Kunio

2006-04-01

Computer-aided diagnostic (CAD) schemes have been developed to assist radiologists in detecting various lesions in medical images. In addition to the development, an equally important problem is the reliable evaluation of the performance levels of various CAD schemes. It is good to see that more and more investigators are employing more reliable evaluation methods such as leave-one-out and cross validation, instead of less reliable methods such as resubstitution, for assessing their CAD schemes. However, the common applications of leave-one-out and cross-validation evaluation methods do not necessarily imply that the estimated performance levels are accurate and precise. Pitfalls often occur in the use of leave-one-out and cross-validation evaluation methods, and they lead to unreliable estimation of performance levels. In this study, we first identified a number of typical pitfalls for the evaluation of CAD schemes, and conducted a Monte Carlo simulation experiment for each of the pitfalls to demonstrate quantitatively the extent of bias and/or variance caused by the pitfall. Our experimental results indicate that considerable bias and variance may exist in the estimated performance levels of CAD schemes if one employs various flawed leave-one-out and cross-validation evaluation methods. In addition, for promoting and utilizing a high standard for reliable evaluation of CAD schemes, we attempt to make recommendations, whenever possible, for overcoming these pitfalls. We believe that, with the recommended evaluation methods, we can considerably reduce the bias and variance in the estimated performance levels of CAD schemes.

Knowledge representation for commonality

NASA Technical Reports Server (NTRS)

Yeager, Dorian P.

1990-01-01

Domain-specific knowledge necessary for commonality analysis falls into two general classes: commonality constraints and costing information. Notations for encoding such knowledge should be powerful and flexible and should appeal to the domain expert. The notations employed by the Commonality Analysis Problem Solver (CAPS) analysis tool are described. Examples are given to illustrate the main concepts.

Cross-Domain Multi-View Object Retrieval via Multi-Scale Topic Models.

PubMed

Hong, Richang; Hu, Zhenzhen; Wang, Ruxin; Wang, Meng; Tao, Dacheng

2016-09-27

The increasing number of 3D objects in various applications has increased the requirement for effective and efficient 3D object retrieval methods, which attracted extensive research efforts in recent years. Existing works mainly focus on how to extract features and conduct object matching. With the increasing applications, 3D objects come from different areas. In such circumstances, how to conduct object retrieval becomes more important. To address this issue, we propose a multi-view object retrieval method using multi-scale topic models in this paper. In our method, multiple views are first extracted from each object, and then the dense visual features are extracted to represent each view. To represent the 3D object, multi-scale topic models are employed to extract the hidden relationship among these features with respected to varied topic numbers in the topic model. In this way, each object can be represented by a set of bag of topics. To compare the objects, we first conduct topic clustering for the basic topics from two datasets, and then generate the common topic dictionary for new representation. Then, the two objects can be aligned to the same common feature space for comparison. To evaluate the performance of the proposed method, experiments are conducted on two datasets. The 3D object retrieval experimental results and comparison with existing methods demonstrate the effectiveness of the proposed method.

A Current-Mode Common-Mode Feedback Circuit (CMFB) with Rail-to-Rail Operation

NASA Astrophysics Data System (ADS)

Suadet, Apirak; Kasemsuwan, Varakorn

2011-03-01

This paper presents a current-mode common-mode feedback (CMFB) circuit with rail-to-rail operation. The CMFB is a stand-alone circuit, which can be connected to any low voltage transconductor without changing or upsetting the existing circuit. The proposed CMFB employs current mirrors, operating as common-mode detector and current amplifier to enhance the loop gain of the CMFB. The circuit employs positive feedback to enhance the output impedance and gain. The circuit has been designed using a 0.18 μm CMOS technology under 1V supply and analyzed using HSPICE with BSIM3V3 device models. A pseudo-differential amplifier using two common sources and the proposed CMFB shows rail to rail output swing (± 0.7 V) with low common-mode gain (-36 dB) and power dissipation of 390 μW.

Methods of Model Reduction for Large-Scale Biological Systems: A Survey of Current Methods and Trends.

PubMed

Snowden, Thomas J; van der Graaf, Piet H; Tindall, Marcus J

2017-07-01

Complex models of biochemical reaction systems have become increasingly common in the systems biology literature. The complexity of such models can present a number of obstacles for their practical use, often making problems difficult to intuit or computationally intractable. Methods of model reduction can be employed to alleviate the issue of complexity by seeking to eliminate those portions of a reaction network that have little or no effect upon the outcomes of interest, hence yielding simplified systems that retain an accurate predictive capacity. This review paper seeks to provide a brief overview of a range of such methods and their application in the context of biochemical reaction network models. To achieve this, we provide a brief mathematical account of the main methods including timescale exploitation approaches, reduction via sensitivity analysis, optimisation methods, lumping, and singular value decomposition-based approaches. Methods are reviewed in the context of large-scale systems biology type models, and future areas of research are briefly discussed.

Comparison of colorimetry and electrothermal atomic absorption spectroscopy for the quantification of non-transferrin bound iron in human sera.

PubMed

Jittangprasert, Piyada; Wilairat, Prapin; Pootrakul, Pensri

2004-12-01

This paper describes a comparison of two analytical techniques, one employing bathophenanthrolinedisulfonate (BPT), a most commonly-used reagent for Fe (II) determination, as chromogen and an electrothermal atomic absorption spectroscopy (ETAAS) for the quantification of non-transferrin bound iron (NTBI) in sera from thalassemic patients. Nitrilotriacetic acid (NTA) was employed as the ligand for binding iron from low molecular weight iron complexes present in the serum but without removing iron from the transferrin protein. After ultrafiltration the Fe (III)-NTA complex was then quantified by both methods. Kinetic study of the rate of the Fe (II)-BPT complex formation for various excess amounts of NTA ligand was also carried out. The kinetic data show that a minimum time duration (> 60 minutes) is necessary for complete complex formation when large excess of NTA is used. Calibration curves given by colorimetric and ETAAS methods were linear over the range of 0.15-20 microM iron (III). The colorimetric and ETAAS methods exhibited detection limit (3sigma) of 0.13 and 0.14 microM, respectively. The NTBI concentrations from 55 thalassemic serum samples measured employing BPT as chromogen were statistically compared with the results determined by ETAAS. No significant disagreement at 95% confidence level was observed. It is, therefore, possible to select any one of these two techniques for determination of NTBI in serum samples of thalassemic patients. However, the colorimetric procedure requires a longer analysis time because of a slow rate of exchange of NTA ligand with BPT, leading to the slow rate of formation of the colored complex.

Temporary Contracts: Effect on Job Satisfaction and Personal Lives of Recent Phd Graduates

ERIC Educational Resources Information Center

Waaijer, Cathelijn J. F.; Belder, Rosalie; Sonneveld, Hans; van Bochove, Cornelis A.; van der Weijden, Inge C. M.

2017-01-01

In this study, we assess the effects of temporary employment on job satisfaction and the personal lives of recent PhD graduates. Temporary employment is becoming increasingly prevalent in many sectors, but has been relatively common in academia, especially for early career scientists. Labor market theory shows temporary employment to have a…

29 CFR 825.105 - Counting employees for determining coverage.

Code of Federal Regulations, 2011 CFR

2011-07-01

... suffer or permit to work.” The courts have indicated that, while “to permit” requires a more positive action than “to suffer,” both terms imply much less positive action than required by the common law. Mere knowledge by an employer of work done for the employer by another is sufficient to create the employment...

Los Angeles County Office Survey, Research Study Number 80-9.

ERIC Educational Resources Information Center

Rudnitsky, Andrea

A survey of area employers was conducted by Los Angeles City College in Fall 1979 to determine: (1) the skill requirements for entry-level secretarial and clerical workers, (2) the salaries earned by these employees, (3) the word processing equipment commonly used by employers, (4) future employment trends in secretarial/clerical fields, and (5)…

Graduate Attributes and Employability Skills: Graduates' Perspectives on Employers' Expectations in Oman

ERIC Educational Resources Information Center

Belwal, Rakesh; Priyadarshi, Pushpendra; Al Fazari, Mariam Humaid

2017-01-01

Purpose: Supply and demand characteristics, influenced by the pre- and post-oil economy of Oman, have caused unemployment challenges to Omani graduates. The purpose of this paper is to explore the most common graduate attributes as they apply to graduates' employability in Oman. Design/methodology/approach: The study uses the principles of…

Experimental Demonstration of a Synthetic Lorentz Force by Using Radiation Pressure.

PubMed

Šantić, N; Dubček, T; Aumiler, D; Buljan, H; Ban, T

2015-09-02

Synthetic magnetism in cold atomic gases opened the doors to many exciting novel physical systems and phenomena. Ubiquitous are the methods used for the creation of synthetic magnetic fields. They include rapidly rotating Bose-Einstein condensates employing the analogy between the Coriolis and the Lorentz force, and laser-atom interactions employing the analogy between the Berry phase and the Aharonov-Bohm phase. Interestingly, radiation pressure - being one of the most common forces induced by light - has not yet been used for synthetic magnetism. We experimentally demonstrate a synthetic Lorentz force, based on the radiation pressure and the Doppler effect, by observing the centre-of-mass motion of a cold atomic cloud. The force is perpendicular to the velocity of the cold atomic cloud, and zero for the cloud at rest. Our novel concept is straightforward to implement in a large volume, for a broad range of velocities, and can be extended to different geometries.

Revealing the glass transition in shape memory polymers using Brillouin spectroscopy.

PubMed

Steelman, Zachary A; Weems, Andrew C; Traverso, Andrew J; Szafron, Jason M; Maitland, Duncan J; Yakovlev, Vladislav V

2017-12-11

Emerging medical devices which employ shape memory polymers (SMPs) require precise measurements of the glass transition temperature (T g ) to ensure highly controlled shape recovery kinetics. Conventional techniques like differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) have limitations that prevent utilization for certain devices, including limited accuracy and the need for sacrificial samples. In this report, we employ an approach based on Brillouin spectroscopy to probe the glass transition of SMPs rapidly, remotely, and nondestructively. Further, we compare the T g obtained from Brillouin scattering with DMA- and DSC-measured T g to demonstrate the accuracy of Brillouin scattering for this application. We conclude that Brillouin spectroscopy is an accurate technique for obtaining the glass transition temperature of SMPs, aligning closely with the most common laboratory standards while providing a rapid, remote, and nondestructive method for the analysis of unique polymeric medical devices.

Pre-Travel Medical Preparation of Business and Occupational Travelers

PubMed Central

Khan, Nomana M.; Jentes, Emily S.; Brown, Clive; Han, Pauline; Rao, Sowmya R.; Kozarsky, Phyllis; Hagmann, Stefan H.F.; LaRocque, Regina C.; Ryan, Edward T.

2016-01-01

Objectives: The aim of the study was to understand more about pre-travel preparations and itineraries of business and occupational travelers. Methods: De-identified data from 18 Global TravEpiNet clinics from January 2009 to December 2012 were analyzed. Results: Of 23,534 travelers, 61% were non-occupational and 39% occupational. Business travelers were more likely to be men, had short times to departure and shorter trip durations, and commonly refused influenza, meningococcal, and hepatitis B vaccines. Most business travelers indicated that employers suggested the pre-travel health consultation, whereas non-occupational travelers sought consultations because of travel health concerns. Conclusions: Sub-groups of occupational travelers have characteristic profiles, with business travelers being particularly distinct. Employers play a role in encouraging business travelers to seek pre-travel consultations. Such consultations, even if scheduled immediately before travel, can identify vaccination gaps and increase coverage. PMID:26479857

Analyzing the Heterogeneous Hierarchy of Cultural Heritage Materials: Analytical Imaging.

PubMed

Trentelman, Karen

2017-06-12

Objects of cultural heritage significance are created using a wide variety of materials, or mixtures of materials, and often exhibit heterogeneity on multiple length scales. The effective study of these complex constructions thus requires the use of a suite of complementary analytical technologies. Moreover, because of the importance and irreplaceability of most cultural heritage objects, researchers favor analytical techniques that can be employed noninvasively, i.e., without having to remove any material for analysis. As such, analytical imaging has emerged as an important approach for the study of cultural heritage. Imaging technologies commonly employed, from the macroscale through the micro- to nanoscale, are discussed with respect to how the information obtained helps us understand artists' materials and methods, the cultures in which the objects were created, how the objects may have changed over time, and importantly, how we may develop strategies for their preservation.

Numerical simulations of thermoacoustic waves in transcritical fluids employing the spectral difference approach

NASA Astrophysics Data System (ADS)

Scalo, Carlo; Migliorino, Mario Tindaro; Chapelier, Jean-Baptiste

2017-11-01

We investigate the stability properties of thermoacoustically unstable planar waves in transcritical fluids via high-fidelity Navier-Stokes simulations based on a Spectral Difference (SD) discretization coupled with the Peng-Robinson equation of state and Chung's method for the fluid transport properties. A canonical thermoacoustically unstable standing-wave resonator filled with supercritical CO2 kept in pseudoboiling conditions in the stack is considered. Real fluid effects near the critical point are shown to boost thermoacoustic energy production, as also confirmed by companion eigenvalue analysis supporting the closure of the acoustic energy budgets. A kink in the eigenmode shape is observed at the location of pseudo phase change, consistent with the abrupt change in base impedance. The current study demonstrates a transformative approach to thermoacoustic energy generation, exploiting otherwise unwanted fluid dynamics instabilities commonly observed in aeronautical applications employing transcritical fluids.

Nanoporous Substrate with Mixed Nanoclusters for Surface Enhanced Raman Scattering.

NASA Astrophysics Data System (ADS)

Chang, Sehoon; Ko, Hyunhyub; Singamaneni, Srikanth; Gunawidjaja, Ray; Tsukruk, Vladimir

2009-03-01

Rapid detection of plastic and liquid explosives is an urgent need due to various societal and technological reasons. We employed a novel design of surface enhanced Raman scattering (SERS)-active substrate based on porous alumina membranes decorated with mixed nanoclusters of gold nanorods and nanoparticles. We demonstrated trace level detection of several important explosives such as dinitrotolene (DNT), trinitrotoluene (TNT), and hexamethylenetriperoxidediamine (HMTD) by fast, sensitive, reliable Raman spectroscopic method. We achieved near molecular-level detection (about 15˜ 30 molecules) of DNT and TNT utilizing the SERS substrate. However, trace level detection is challenging due to the lack of common optical signatures (fluorescence, absorption in UV-vis range) or chemical functionality of peroxide-based explosives such as HMTD. To overcome this, we employed photochemical decomposition approach and analyzed chemical fragments using SERS. We suggest that tailored polymer coating, mixed nanoclusters, and laser-induced photocatalytic decomposition are all critical for achieving this unprecedented sensitivity level..

Revealing the glass transition in shape memory polymers using Brillouin spectroscopy

NASA Astrophysics Data System (ADS)

Steelman, Zachary A.; Weems, Andrew C.; Traverso, Andrew J.; Szafron, Jason M.; Maitland, Duncan J.; Yakovlev, Vladislav V.

2017-12-01

Emerging medical devices which employ shape memory polymers (SMPs) require precise measurements of the glass transition temperature (Tg) to ensure highly controlled shape recovery kinetics. Conventional techniques like differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) have limitations that prevent utilization for certain devices, including limited accuracy and the need for sacrificial samples. In this report, we employ an approach based on Brillouin spectroscopy to probe the glass transition of SMPs rapidly, remotely, and nondestructively. Further, we compare the Tg obtained from Brillouin scattering with DMA- and DSC-measured Tg to demonstrate the accuracy of Brillouin scattering for this application. We conclude that Brillouin spectroscopy is an accurate technique for obtaining the glass transition temperature of SMPs, aligning closely with the most common laboratory standards while providing a rapid, remote, and nondestructive method for the analysis of unique polymeric medical devices.

Proof firm downsizing and diagnosis-specific disability pensioning in Norway

PubMed Central

2013-01-01

Background We wanted to investigate if firm downsizing is related to an increased rate of disability pensions among the former employed, especially for those with musculoskeletal and psychiatric diagnoses, and for those having to leave the firm. Methods Statistics Norway provided a linked file with demographic information and all social security grants from the National Insurance Administration for 1992–2004 for all inhabitants in Norway. Our sample was aged 30–55 years in 1995, being alive, employed and not having a disability pension at the end of 2000. Downsizing was defined as percent change in number of employed per firm from 1995 to end 2000. Employment data were missing for 25.6% of the sample. Results Disability pension rates in the next four years were 25% higher for those experiencing a 30-59% downsizing than for those not experiencing a reduction of the workforce. 1-29% and 60-100% downsizing did not have this effect. Stayers following down-sizing had higher disability pension rates than leavers. What we have called complex musculoskeletal and psychiatric diagnoses were relatively most common. Conclusion Moderate downsizing is followed by a significant increase in disability pension rates in the following four years, often with complex musculoskeletal and psychiatric diagnoses. PMID:23311568

Precarious Employment, Bad Jobs, Labor Unions, and Early Retirement

PubMed Central

Warren, John R.; Sweeney, Megan M.; Hauser, Robert M.; Ho, Jeong-Hwa

2011-01-01

Objectives. We examined the extent to which involuntary job loss, exposure to “bad jobs,” and labor union membership across the life course are associated with the risk of early retirement. Methods. Using data from the Wisconsin Longitudinal Study, a large (N = 8,609) sample of men and women who graduated from high school in 1957, we estimated discrete-time event history models for the transition to first retirement through age 65. We estimated models separately for men and women. Results. We found that experience of involuntary job loss and exposure to bad jobs are associated with a lower risk of retiring before age 65, whereas labor union membership is associated with a higher likelihood of early retirement. These relationships are stronger for men than for women and are mediated to some extent by pre-retirement differences in pension eligibility, wealth, job characteristics, and health. Discussion. Results provide some support for hypotheses derived from theories of cumulative stratification, suggesting that earlier employment experiences should influence retirement outcomes indirectly through later-life characteristics. However, midlife employment experiences remain associated with earlier retirement, net of more temporally proximate correlates, highlighting the need for further theorization and empirical evaluation of the mechanisms through which increasingly common employment experiences influence the age at which older Americans retire. PMID:21310772

Use of employer administrative databases to identify systematic causes of injury in aluminum manufacturing.

PubMed

Pollack, Keshia M; Agnew, Jacqueline; Slade, Martin D; Cantley, Linda; Taiwo, Oyebode; Vegso, Sally; Sircar, Kanta; Cullen, Mark R

2007-09-01

Employer administrative files are an underutilized source of data in epidemiologic studies of occupational injuries. Personnel files, occupational health surveillance data, industrial hygiene data, and a real-time incident and injury management system from a large multi-site aluminum manufacturer were linked deterministically. An ecological-level measure of physical job demand was also linked. This method successfully created a database containing over 100 variables for 9,101 hourly employees from eight geographically dispersed U.S. plants. Between 2002 and 2004, there were 3,563 traumatic injuries to 2,495 employees. The most common injuries were sprain/strains (32%), contusions (24%), and lacerations (14%). A multivariable logistic regression model revealed that physical job demand was the strongest predictor of injury risk, in a dose dependent fashion. Other strong predictors of injury included female gender, young age, short company tenure and short time on current job. Employer administrative files are a useful source of data, as they permit the exploration of risk factors and potential confounders that are not included in many population-based surveys. The ability to link employer administrative files with injury surveillance data is a valuable analysis strategy for comprehensively studying workplace injuries, identifying salient risk factors, and targeting workforce populations disproportionately affected. (c) 2007 Wiley-Liss, Inc.

Determination of glucose and uric acid with bienzyme colorimetry on microfluidic paper-based analysis devices.

PubMed

Chen, Xi; Chen, Jin; Wang, Fubin; Xiang, Xia; Luo, Ming; Ji, Xinghu; He, Zhike

2012-05-15

In this work, we first employ a drying method combining with the bienzyme colorimetric detection of glucose and uric acid on microfluidic paper-based analysis devices (μPADs). The channels of 3D μPADs are also designed by us to get better results. The color results are recorded by both Gel Documentation systems and a common camera. By using Gel Documentation systems, the limits of detection (LOD) of glucose and uric acid are 3.81 × 10(-5)M and 4.31 × 10(-5)M, respectively one order of magnitude lower than that of the reported methods on μPADs. By using a common camera, the limits of detection (LOD) of glucose and uric acid are 2.13 × 10(-4)M and 2.87 × 10(-4)M, respectively. Furthermore, the effects of detection conditions have been investigated and discussed comprehensively. Human serum samples are detected with satisfactory results, which are comparable with the clinical testing results. A low-cost, simple and rapid colorimetric method for the simultaneous detection of glucose and uric acid on the μPADs has been developed with enhanced sensitivity. Copyright © 2012 Elsevier B.V. All rights reserved.

Applications and limitations of constrained high-resolution peak fitting on low resolving power mass spectra from the ToF-ACSM

DOE PAGES

Timonen, Hilkka; Cubison, Mike; Aurela, Minna; ...

2016-07-25

The applicability, methods and limitations of constrained peak fitting on mass spectra of low mass resolving power ( m/Δ m 50~500) recorded with a time-of-flight aerosol chemical speciation monitor (ToF-ACSM) are explored. Calibration measurements as well as ambient data are used to exemplify the methods that should be applied to maximise data quality and assess confidence in peak-fitting results. Sensitivity analyses and basic peak fit metrics such as normalised ion separation are employed to demonstrate which peak-fitting analyses commonly performed in high-resolution aerosol mass spectrometry are appropriate to perform on spectra of this resolving power. Information on aerosol sulfate, nitrate,more » sodium chloride, methanesulfonic acid as well as semi-volatile metal species retrieved from these methods is evaluated. The constants in a commonly used formula for the estimation of the mass concentration of hydrocarbon-like organic aerosol may be refined based on peak-fitting results. Lastly, application of a recently published parameterisation for the estimation of carbon oxidation state to ToF-ACSM spectra is validated for a range of organic standards and its use demonstrated for ambient urban data.« less

Solid-perforated panel layout optimization by topology optimization based on unified transfer matrix.

PubMed

Kim, Yoon Jae; Kim, Yoon Young

2010-10-01

This paper presents a numerical method for the optimization of the sequencing of solid panels, perforated panels and air gaps and their respective thickness for maximizing sound transmission loss and/or absorption. For the optimization, a method based on the topology optimization formulation is proposed. It is difficult to employ only the commonly-used material interpolation technique because the involved layers exhibit fundamentally different acoustic behavior. Thus, an optimization method formulation using a so-called unified transfer matrix is newly proposed. The key idea is to form elements of the transfer matrix such that interpolated elements by the layer design variables can be those of air, perforated and solid panel layers. The problem related to the interpolation is addressed and bench mark-type problems such as sound transmission or absorption maximization problems are solved to check the efficiency of the developed method.

Relationships between autofocus methods for SAR and self-survey techniques for SONAR. [Synthetic Aperture Radar (SAR)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wahl, D.E.; Jakowatz, C.V. Jr.; Ghiglia, D.C.

1991-01-01

Autofocus methods in SAR and self-survey techniques in SONAR have a common mathematical basis in that they both involve estimation and correction of phase errors introduced by sensor position uncertainties. Time delay estimation and correlation methods have been shown to be effective in solving the self-survey problem for towed SONAR arrays. Since it can be shown that platform motion errors introduce similar time-delay estimation problems in SAR imaging, the question arises as to whether such techniques could be effectively employed for autofocus of SAR imagery. With a simple mathematical model for motion errors in SAR, we will show why suchmore » correlation/time-delay techniques are not nearly as effective as established SAR autofocus algorithms such as phase gradient autofocus or sub-aperture based methods. This analysis forms an important bridge between signal processing methodologies for SAR and SONAR. 5 refs., 4 figs.« less

Lesion Border Detection in Dermoscopy Images

PubMed Central

Celebi, M. Emre; Schaefer, Gerald; Iyatomi, Hitoshi; Stoecker, William V.

2009-01-01

Background Dermoscopy is one of the major imaging modalities used in the diagnosis of melanoma and other pigmented skin lesions. Due to the difficulty and subjectivity of human interpretation, computerized analysis of dermoscopy images has become an important research area. One of the most important steps in dermoscopy image analysis is the automated detection of lesion borders. Methods In this article, we present a systematic overview of the recent border detection methods in the literature paying particular attention to computational issues and evaluation aspects. Conclusion Common problems with the existing approaches include the acquisition, size, and diagnostic distribution of the test image set, the evaluation of the results, and the inadequate description of the employed methods. Border determination by dermatologists appears to depend upon higher-level knowledge, therefore it is likely that the incorporation of domain knowledge in automated methods will enable them to perform better, especially in sets of images with a variety of diagnoses. PMID:19121917

Cosmological parameter estimation using Particle Swarm Optimization

NASA Astrophysics Data System (ADS)

Prasad, J.; Souradeep, T.

2014-03-01

Constraining parameters of a theoretical model from observational data is an important exercise in cosmology. There are many theoretically motivated models, which demand greater number of cosmological parameters than the standard model of cosmology uses, and make the problem of parameter estimation challenging. It is a common practice to employ Bayesian formalism for parameter estimation for which, in general, likelihood surface is probed. For the standard cosmological model with six parameters, likelihood surface is quite smooth and does not have local maxima, and sampling based methods like Markov Chain Monte Carlo (MCMC) method are quite successful. However, when there are a large number of parameters or the likelihood surface is not smooth, other methods may be more effective. In this paper, we have demonstrated application of another method inspired from artificial intelligence, called Particle Swarm Optimization (PSO) for estimating cosmological parameters from Cosmic Microwave Background (CMB) data taken from the WMAP satellite.

Computational plasticity algorithm for particle dynamics simulations

NASA Astrophysics Data System (ADS)

Krabbenhoft, K.; Lyamin, A. V.; Vignes, C.

2018-01-01

The problem of particle dynamics simulation is interpreted in the framework of computational plasticity leading to an algorithm which is mathematically indistinguishable from the common implicit scheme widely used in the finite element analysis of elastoplastic boundary value problems. This algorithm provides somewhat of a unification of two particle methods, the discrete element method and the contact dynamics method, which usually are thought of as being quite disparate. In particular, it is shown that the former appears as the special case where the time stepping is explicit while the use of implicit time stepping leads to the kind of schemes usually labelled contact dynamics methods. The framing of particle dynamics simulation within computational plasticity paves the way for new approaches similar (or identical) to those frequently employed in nonlinear finite element analysis. These include mixed implicit-explicit time stepping, dynamic relaxation and domain decomposition schemes.

Thermophysical Properties Measurements of Zr62Cu20Al10Ni8

NASA Technical Reports Server (NTRS)

Bradshaw, Richard C.; Waren, Mary; Rogers, Jan R.; Rathz, Thomas J.; Gangopadhyay, Anup K.; Kelton, Ken F.; Hyers, Robert W.

2006-01-01

Thermophysical property studies performed at high temperature can prove challenging because of reactivity problems brought on by the elevated temperatures. Contaminants from measuring devices and container walls can cause changes in properties. To prevent this, containerless processing techniques can be employed to isolate a sample during study. A common method used for this is levitation. Typical levitation methods used for containerless processing are, aerodynamically, electromagnetically and electrostatically based. All levitation methods reduce heterogeneous nucleation sites, 'which in turn provide access to metastable undercooled phases. In particular, electrostatic levitation is appealing because sample motion and stirring are minimized; and by combining it with optically based non-contact measuring techniques, many thermophysical properties can be measured. Applying some of these techniques, surface tension, viscosity and density have been measured for the glass forming alloy Zr62Cu20Al10Ni8 and will be presented with a brief overview of the non-contact measuring method used.

Through evolution's eyes: extracting mate preferences by linking visual attention to adaptive design.

PubMed

Krupp, Daniel Brian

2008-02-01

Information is crucial to decision-making, including mate choice decisions. Perceptual systems, such as attention, evolved in part to forage for reproductive information; consequently, these systems can be used to reveal mate preferences. Here, I consider the place of visual information in human mate choice and provide a rationale for pressing into service methods drawn from the attention literature for the study of mate choice decisions. Because visual attention is allocated automatically and selectively, it may be used to complement common methods of mate preference assessment, such as self-report questionnaires and measures of genital arousal, while avoiding some of the pitfalls of these methods. Beyond the utility of increasing confidence in extant research findings by employing relatively unobtrusive methods, visual attention paradigms can also allow researchers to explore a variety of questions that are rarely asked, such as those concerned with signal efficiency and tradeoffs in the assessment of mate value.

Simplified stereo-optical ultrasound plane calibration

NASA Astrophysics Data System (ADS)

Hoßbach, Martin; Noll, Matthias; Wesarg, Stefan

2013-03-01

Image guided therapy is a natural concept and commonly used in medicine. In anesthesia, a common task is the injection of an anesthetic close to a nerve under freehand ultrasound guidance. Several guidance systems exist using electromagnetic tracking of the ultrasound probe as well as the needle, providing the physician with a precise projection of the needle into the ultrasound image. This, however, requires additional expensive devices. We suggest using optical tracking with miniature cameras attached to a 2D ultrasound probe to achieve a higher acceptance among physicians. The purpose of this paper is to present an intuitive method to calibrate freehand ultrasound needle guidance systems employing a rigid stereo camera system. State of the art methods are based on a complex series of error prone coordinate system transformations which makes them susceptible to error accumulation. By reducing the amount of calibration steps to a single calibration procedure we provide a calibration method that is equivalent, yet not prone to error accumulation. It requires a linear calibration object and is validated on three datasets utilizing di erent calibration objects: a 6mm metal bar and a 1:25mm biopsy needle were used for experiments. Compared to existing calibration methods for freehand ultrasound needle guidance systems, we are able to achieve higher accuracy results while additionally reducing the overall calibration complexity. Ke

Employer-employee relations.

PubMed

Copeland, J D

1993-09-01

As an employer, a veterinarian must be vigilant to protect the rights of both job applicants and employees. Federal and state statutes guarantee that applicants and employees will not be subjected to discrimination in any aspect of employment, including recruitment, hiring, promotion, compensation, and termination of employment. An employer may not discriminate on the basis of sex, race, color, national origin, religion, age, or physical disability. In addition, common law tort actions give employees powerful causes of action be against those employers who injure employees. More than ever, employers must be diligent in obeying the law. Employers must also take measures to protect themselves from employee claims by instituting risk management plans and purchasing adequate insurance coverage.

The study design elements employed by researchers in preclinical animal experiments from two research domains and implications for automation of systematic reviews.

PubMed

O'Connor, Annette M; Totton, Sarah C; Cullen, Jonah N; Ramezani, Mahmood; Kalivarapu, Vijay; Yuan, Chaohui; Gilbert, Stephen B

2018-01-01

Systematic reviews are increasingly using data from preclinical animal experiments in evidence networks. Further, there are ever-increasing efforts to automate aspects of the systematic review process. When assessing systematic bias and unit-of-analysis errors in preclinical experiments, it is critical to understand the study design elements employed by investigators. Such information can also inform prioritization of automation efforts that allow the identification of the most common issues. The aim of this study was to identify the design elements used by investigators in preclinical research in order to inform unique aspects of assessment of bias and error in preclinical research. Using 100 preclinical experiments each related to brain trauma and toxicology, we assessed design elements described by the investigators. We evaluated Methods and Materials sections of reports for descriptions of the following design elements: 1) use of comparison group, 2) unit of allocation of the interventions to study units, 3) arrangement of factors, 4) method of factor allocation to study units, 5) concealment of the factors during allocation and outcome assessment, 6) independence of study units, and 7) nature of factors. Many investigators reported using design elements that suggested the potential for unit-of-analysis errors, i.e., descriptions of repeated measurements of the outcome (94/200) and descriptions of potential for pseudo-replication (99/200). Use of complex factor arrangements was common, with 112 experiments using some form of factorial design (complete, incomplete or split-plot-like). In the toxicology dataset, 20 of the 100 experiments appeared to use a split-plot-like design, although no investigators used this term. The common use of repeated measures and factorial designs means understanding bias and error in preclinical experimental design might require greater expertise than simple parallel designs. Similarly, use of complex factor arrangements creates novel challenges for accurate automation of data extraction and bias and error assessment in preclinical experiments.

Analytical methods applied to diverse types of Brazilian propolis

PubMed Central

2011-01-01

Propolis is a bee product, composed mainly of plant resins and beeswax, therefore its chemical composition varies due to the geographic and plant origins of these resins, as well as the species of bee. Brazil is an important supplier of propolis on the world market and, although green colored propolis from the southeast is the most known and studied, several other types of propolis from Apis mellifera and native stingless bees (also called cerumen) can be found. Propolis is usually consumed as an extract, so the type of solvent and extractive procedures employed further affect its composition. Methods used for the extraction; analysis the percentage of resins, wax and insoluble material in crude propolis; determination of phenolic, flavonoid, amino acid and heavy metal contents are reviewed herein. Different chromatographic methods applied to the separation, identification and quantification of Brazilian propolis components and their relative strengths are discussed; as well as direct insertion mass spectrometry fingerprinting. Propolis has been used as a popular remedy for several centuries for a wide array of ailments. Its antimicrobial properties, present in propolis from different origins, have been extensively studied. But, more recently, anti-parasitic, anti-viral/immune stimulating, healing, anti-tumor, anti-inflammatory, antioxidant and analgesic activities of diverse types of Brazilian propolis have been evaluated. The most common methods employed and overviews of their relative results are presented. PMID:21631940

Statistical software applications used in health services research: analysis of published studies in the U.S

PubMed Central

2011-01-01

Background This study aims to identify the statistical software applications most commonly employed for data analysis in health services research (HSR) studies in the U.S. The study also examines the extent to which information describing the specific analytical software utilized is provided in published articles reporting on HSR studies. Methods Data were extracted from a sample of 1,139 articles (including 877 original research articles) published between 2007 and 2009 in three U.S. HSR journals, that were considered to be representative of the field based upon a set of selection criteria. Descriptive analyses were conducted to categorize patterns in statistical software usage in those articles. The data were stratified by calendar year to detect trends in software use over time. Results Only 61.0% of original research articles in prominent U.S. HSR journals identified the particular type of statistical software application used for data analysis. Stata and SAS were overwhelmingly the most commonly used software applications employed (in 46.0% and 42.6% of articles respectively). However, SAS use grew considerably during the study period compared to other applications. Stratification of the data revealed that the type of statistical software used varied considerably by whether authors were from the U.S. or from other countries. Conclusions The findings highlight a need for HSR investigators to identify more consistently the specific analytical software used in their studies. Knowing that information can be important, because different software packages might produce varying results, owing to differences in the software's underlying estimation methods. PMID:21977990

A computerized recognition system for the home-based physiotherapy exercises using an RGBD camera.

PubMed

Ar, Ilktan; Akgul, Yusuf Sinan

2014-11-01

Computerized recognition of the home based physiotherapy exercises has many benefits and it has attracted considerable interest among the computer vision community. However, most methods in the literature view this task as a special case of motion recognition. In contrast, we propose to employ the three main components of a physiotherapy exercise (the motion patterns, the stance knowledge, and the exercise object) as different recognition tasks and embed them separately into the recognition system. The low level information about each component is gathered using machine learning methods. Then, we use a generative Bayesian network to recognize the exercise types by combining the information from these sources at an abstract level, which takes the advantage of domain knowledge for a more robust system. Finally, a novel postprocessing step is employed to estimate the exercise repetitions counts. The performance evaluation of the system is conducted with a new dataset which contains RGB (red, green, and blue) and depth videos of home-based exercise sessions for commonly applied shoulder and knee exercises. The proposed system works without any body-part segmentation, bodypart tracking, joint detection, and temporal segmentation methods. In the end, favorable exercise recognition rates and encouraging results on the estimation of repetition counts are obtained.

Influences of Social and Style Variables on Adult Usage of African American English Features

PubMed Central

Craig, Holly K.; Grogger, Jeffrey T.

2013-01-01

Purpose In this study, the authors examined the influences of selected social (gender, employment status, educational achievement level) and style variables (race of examiner, interview topic) on the production of African American English (AAE) by adults. Method Participants were 50 African American men and women, ages 20–30 years. The authors used Rapid and Anonymous Survey (RAS) methods to collect responses to questions on informal situational and formal message-oriented topics in a short interview with an unacquainted interlocutor. Results Results revealed strong systematic effects for academic achievement, but not gender or employment status. Most features were used less frequently by participants with higher educational levels, but sharp declines in the usage of 5 specific features distinguished the participants differing in educational achievement. Strong systematic style effects were found for the 2 types of questions, but not race of addressee. The features that were most commonly used across participants—copula absence, variable subject–verb agreement, and appositive pronouns—were also the features that showed the greatest style shifting. Conclusions The findings lay a foundation with mature speakers for rate-based and feature inventory methods recently shown to be informative for the study of child AAE and demonstrate the benefits of the RAS. PMID:22361105

Measurement of complex terahertz dielectric properties of polymers using an improved free-space technique

NASA Astrophysics Data System (ADS)

Chang, Tianying; Zhang, Xiansheng; Yang, Chuanfa; Sun, Zhonglin; Cui, Hong-Liang

2017-04-01

The complex dielectric properties of non-polar solid polymer materials were measured in the terahertz (THz) band by a free-space technique employing a frequency-extended vector network analyzer (VNA), and by THz time-domain spectroscopy (TDS). Mindful of THz wave’s unique characteristics, the free-space method for measurement of material dielectric properties in the microwave band was expanded and improved for application in the THz frequency region. To ascertain the soundness and utility of the proposed method, measurements of the complex dielectric properties of a variety of polymers were carried out, including polytetrafluoroethylene (PTFE, known also by the brand name Teflon), polypropylene (PP), polyethylene (PE), and glass fiber resin (Composite Stone). The free-space method relies on the determination of electromagnetic scattering parameters (S-parameters) of the sample, with the gated-reflect-line (GRL) calibration technique commonly employed using a VNA. Subsequently, based on the S-parameters, the dielectric constant and loss characteristic of the sample were calculated by using a Newtonian iterative algorithm. To verify the calculated results, THz TDS technique, which produced Fresnel parameters such as reflection and transmission coefficients, was also used to independently determine the dielectric properties of these polymer samples, with results satisfactorily corroborating those obtained by the free-space extended microwave technique.

Stability-Indicating TLC-Densitometric Assay for Methyltestosterone and Quantum Chemical Calculations.

PubMed

Musharraf, Syed Ghulam; Ul Arfeen, Qamar; Ul Haq, Faraz; Khatoon, Aliya; Azher Ali, Rahat

2017-10-01

Methyltestosterone is a synthetic testosterone derivative commonly used for the treatment of testosterone deficiency in males and one the anabolic steroids whose use is banned by World Anti-Doping Agency (WADA). This study presents a simple, cost-effective and rapid stability-indicating assay for densitometric quantification of methyltestosterone in pharmaceutical formulation. The developed method employed pre-coated TLC plates with mobile phase hexane:acetone (6.5:3.5 v/v). Limit of detection and limit of quantitation were found to be 2.06 and 6.24 ng/spot, respectively. Stress degradation study of methyltestosterone was conducted by applying various stress conditions such as hydrolysis under acidic, basic and neutral conditions, heating in anhydrous conditions and exposure to light. Methyltestosterone was found to be susceptible to photodegradation, acidic and basic hydrolysis. Degraded products were well resolved with significantly different Rf values. Acid degraded product was identified as 17,17-dimethyl-18-norandrosta-4,13(14)-dien-3-one through spectroscopic methods. The reactivity of methyltestosterone under applied stress conditions was also explained by quantum chemical calculations. The developed method is found to be repeatable, selective and accurate for quantification of methyltestosterone and can be employed for routine analysis. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Statistical analysis of water-quality data containing multiple detection limits II: S-language software for nonparametric distribution modeling and hypothesis testing

USGS Publications Warehouse

Lee, L.; Helsel, D.

2007-01-01

Analysis of low concentrations of trace contaminants in environmental media often results in left-censored data that are below some limit of analytical precision. Interpretation of values becomes complicated when there are multiple detection limits in the data-perhaps as a result of changing analytical precision over time. Parametric and semi-parametric methods, such as maximum likelihood estimation and robust regression on order statistics, can be employed to model distributions of multiply censored data and provide estimates of summary statistics. However, these methods are based on assumptions about the underlying distribution of data. Nonparametric methods provide an alternative that does not require such assumptions. A standard nonparametric method for estimating summary statistics of multiply-censored data is the Kaplan-Meier (K-M) method. This method has seen widespread usage in the medical sciences within a general framework termed "survival analysis" where it is employed with right-censored time-to-failure data. However, K-M methods are equally valid for the left-censored data common in the geosciences. Our S-language software provides an analytical framework based on K-M methods that is tailored to the needs of the earth and environmental sciences community. This includes routines for the generation of empirical cumulative distribution functions, prediction or exceedance probabilities, and related confidence limits computation. Additionally, our software contains K-M-based routines for nonparametric hypothesis testing among an unlimited number of grouping variables. A primary characteristic of K-M methods is that they do not perform extrapolation and interpolation. Thus, these routines cannot be used to model statistics beyond the observed data range or when linear interpolation is desired. For such applications, the aforementioned parametric and semi-parametric methods must be used.

Occupational health of self-employed women workers. Experiences from community based studies of the Self-Employed Women's Association (SEWA).

PubMed

Chatterjee, M

1993-02-01

The Self-Employed Workers' Association (SEWA) has conducted 4 longitudinal, community-based studies to survey the occupational health of self-employed women in Ahmedabad and Indore, India. It included the workers in all stages of research. SEWA staff examined women in readymade garment, bidi, agarbatti, and masala fields. Since SEWA did not use control groups, they could not establish cause and effect relationships. Masala workers had the highest illiteracy rate (66%). At least 50% of all workers (89% of readymade garment workers) worked 8-12 hours/day. Daily wages of most workers did not exceed Rs.10, confirming their low poverty level. The most common occupational health problem while working was pain in the limbs for bidi (63%) and readymade garment workers (80%). They also experienced back pain and headaches. After work, back pain was common among agarbatti (73%) and masala (39%) workers. Masala workers also suffered from blisters and calluses (51%) and burning sensation (45%), particularly in their hands. Gynecological problems (e.g., early periods, white discharge, and burning sensation while urinating) and abdominal pain were common in all 4 groups. These results demonstrated a need for further research on occupational health and gynecological diseases; health facilities to adjust services to meet self-employed workers needs; provision of safe and subsidized tools, safety equipment, benefits (e.g., sick leave and child care), and health insurance; and health education. SEWA recommends that self-employed workers receive identity cards, the government enforce minimum wage laws and regulate working hours, and workers are provided basic amenities (e.g., potable water and sanitation).

Walking and talking the tree of life: Why and how to teach about biodiversity.

PubMed

Ballen, Cissy J; Greene, Harry W

2017-03-01

Taxonomic details of diversity are an essential scaffolding for biology education, yet outdated methods for teaching the tree of life (TOL), as implied by textbook content and usage, are still commonly employed. Here, we show that the traditional approach only vaguely represents evolutionary relationships, fails to denote major events in the history of life, and relies heavily on memorizing near-meaningless taxonomic ranks. Conversely, a clade-based strategy-focused on common ancestry, monophyletic groups, and derived functional traits-is explicitly based on Darwin's "descent with modification," provides students with a rational system for organizing the details of biodiversity, and readily lends itself to active learning techniques. We advocate for a phylogenetic classification that mirrors the TOL, a pedagogical format of increasingly complex but always hierarchical presentations, and the adoption of active learning technologies and tactics.

Confocal laser scanning microscopic photoconversion: a new method to stabilize fluorescently labeled cellular elements for electron microscopic analysis.

PubMed

Colello, Raymond J; Tozer, Jordan; Henderson, Scott C

2012-01-01

Photoconversion, the method by which a fluorescent dye is transformed into a stable, osmiophilic product that can be visualized by electron microscopy, is the most widely used method to enable the ultrastructural analysis of fluorescently labeled cellular structures. Nevertheless, the conventional method of photoconversion using widefield fluorescence microscopy requires long reaction times and results in low-resolution cell targeting. Accordingly, we have developed a photoconversion method that ameliorates these limitations by adapting confocal laser scanning microscopy to the procedure. We have found that this method greatly reduces photoconversion times, as compared to conventional wide field microscopy. Moreover, region-of-interest scanning capabilities of a confocal microscope facilitate the targeting of the photoconversion process to individual cellular or subcellular elements within a fluorescent field. This reduces the area of the cell exposed to light energy, thereby reducing the ultrastructural damage common to this process when widefield microscopes are employed. © 2012 by John Wiley & Sons, Inc.

RAPID COMMUNICATION Time-resolved measurements with a vortex flowmeter in a pulsating turbulent flow using wavelet analysis

NASA Astrophysics Data System (ADS)

Laurantzon, F.; Örlü, R.; Segalini, A.; Alfredsson, P. H.

2010-12-01

Vortex flowmeters are commonly employed in technical applications and are obtainable in a variety of commercially available types. However their robustness and accuracy can easily be impaired by environmental conditions, such as inflow disturbances and/or pulsating conditions. Various post-processing techniques of the vortex signal have been used, but all of these methods are so far targeted on obtaining an improved estimate of the time-averaged bulk velocity. Here, on the other hand, we propose, based on wavelet analysis, a straightforward way to utilize the signal from a vortex shedder to extract the time-resolved and thereby the phase-averaged velocity under pulsatile flow conditions. The method was verified with hot-wire and laser Doppler velocimetry measurements.

In-cell NMR of intrinsically disordered proteins in prokaryotic cells.

PubMed

Ito, Yutaka; Mikawa, Tsutomu; Smith, Brian O

2012-01-01

In-cell NMR, i.e., the acquisition of heteronuclear multidimensional NMR of biomacromolecules inside living cells, is, to our knowledge, the only method for investigating the three-dimensional structure and dynamics of proteins at atomic detail in the intracellular environment. Since the inception of the method, intrinsically disordered proteins have been regarded as particular targets for in-cell NMR, due to their expected sensitivity to the molecular crowding in the intracellular environment. While both prokaryotic and eukaryotic cells can be used as host cells for in-cell NMR, prokaryotic in-cell NMR, particularly employing commonly used protein overexpression systems in Escherichia coli cells, is the most accessible approach. In this chapter we describe general procedures for obtaining in-cell NMR spectra in E. coli cells.

A modified approach to estimating sample size for simple logistic regression with one continuous covariate.

PubMed

Novikov, I; Fund, N; Freedman, L S

2010-01-15

Different methods for the calculation of sample size for simple logistic regression (LR) with one normally distributed continuous covariate give different results. Sometimes the difference can be large. Furthermore, some methods require the user to specify the prevalence of cases when the covariate equals its population mean, rather than the more natural population prevalence. We focus on two commonly used methods and show through simulations that the power for a given sample size may differ substantially from the nominal value for one method, especially when the covariate effect is large, while the other method performs poorly if the user provides the population prevalence instead of the required parameter. We propose a modification of the method of Hsieh et al. that requires specification of the population prevalence and that employs Schouten's sample size formula for a t-test with unequal variances and group sizes. This approach appears to increase the accuracy of the sample size estimates for LR with one continuous covariate.

Blind image quality assessment based on aesthetic and statistical quality-aware features

NASA Astrophysics Data System (ADS)

Jenadeleh, Mohsen; Masaeli, Mohammad Masood; Moghaddam, Mohsen Ebrahimi

2017-07-01

The main goal of image quality assessment (IQA) methods is the emulation of human perceptual image quality judgments. Therefore, the correlation between objective scores of these methods with human perceptual scores is considered as their performance metric. Human judgment of the image quality implicitly includes many factors when assessing perceptual image qualities such as aesthetics, semantics, context, and various types of visual distortions. The main idea of this paper is to use a host of features that are commonly employed in image aesthetics assessment in order to improve blind image quality assessment (BIQA) methods accuracy. We propose an approach that enriches the features of BIQA methods by integrating a host of aesthetics image features with the features of natural image statistics derived from multiple domains. The proposed features have been used for augmenting five different state-of-the-art BIQA methods, which use statistical natural scene statistics features. Experiments were performed on seven benchmark image quality databases. The experimental results showed significant improvement of the accuracy of the methods.

Monoterpenes released from fruit, plant, and vegetable systems.

PubMed

Iqbal, Mohammad Asif; Kim, Ki-Hyun; Ahn, Jeong Hyeon

2014-09-29

To quantify the emission rate of monoterpenes (MTs) from diverse natural sources, the sorbent tube (ST)-thermal desorption (TD) method was employed to conduct the collection and subsequent detection of MTs by gas chromatography. The calibration of MTs, when made by both mass spectrometric (MS) and flame ionization detector (FID), consistently exhibited high coefficient of determination values (R2 > 0.99). This approach was employed to measure their emission rate from different fruit/plant/vegetable (F/P/V) samples with the aid of an impinger-based dynamic headspace sampling system. The results obtained from 10 samples (consisting of carrot, pine needle (P. sylvestris), tangerine, tangerine peel, strawberry, sepals of strawberry, plum, apple, apple peel, and orange juice) marked α-pinene, β-pinene, myrcene, α-terpinene, R-limonene, γ-terpinene, and p-cymene as the most common MTs. R-limonene was the major species emitted from citrus fruits and beverages with its abundance exceeding 90%. In contrast, α-pinene was the most abundant MT (37%) for carrot, while it was myrcene (31%) for pine needle. The overall results for F/P/V samples confirmed α-pinene, β-pinene, myrcene, α-terpinene, and γ-terpinene as common MTs. Nonetheless, the types and magnitude of MTs released from fruits were distinguished from those of vegetables and plants.

Effects of scale of movement, detection probability, and true population density on common methods of estimating population density

DOE PAGES

Keiter, David A.; Davis, Amy J.; Rhodes, Olin E.; ...

2017-08-25

Knowledge of population density is necessary for effective management and conservation of wildlife, yet rarely are estimators compared in their robustness to effects of ecological and observational processes, which can greatly influence accuracy and precision of density estimates. For this study, we simulate biological and observational processes using empirical data to assess effects of animal scale of movement, true population density, and probability of detection on common density estimators. We also apply common data collection and analytical techniques in the field and evaluate their ability to estimate density of a globally widespread species. We find that animal scale of movementmore » had the greatest impact on accuracy of estimators, although all estimators suffered reduced performance when detection probability was low, and we provide recommendations as to when each field and analytical technique is most appropriately employed. The large influence of scale of movement on estimator accuracy emphasizes the importance of effective post-hoc calculation of area sampled or use of methods that implicitly account for spatial variation. In particular, scale of movement impacted estimators substantially, such that area covered and spacing of detectors (e.g. cameras, traps, etc.) must reflect movement characteristics of the focal species to reduce bias in estimates of movement and thus density.« less

Effects of scale of movement, detection probability, and true population density on common methods of estimating population density

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, David A.; Davis, Amy J.; Rhodes, Olin E.

Knowledge of population density is necessary for effective management and conservation of wildlife, yet rarely are estimators compared in their robustness to effects of ecological and observational processes, which can greatly influence accuracy and precision of density estimates. For this study, we simulate biological and observational processes using empirical data to assess effects of animal scale of movement, true population density, and probability of detection on common density estimators. We also apply common data collection and analytical techniques in the field and evaluate their ability to estimate density of a globally widespread species. We find that animal scale of movementmore » had the greatest impact on accuracy of estimators, although all estimators suffered reduced performance when detection probability was low, and we provide recommendations as to when each field and analytical technique is most appropriately employed. The large influence of scale of movement on estimator accuracy emphasizes the importance of effective post-hoc calculation of area sampled or use of methods that implicitly account for spatial variation. In particular, scale of movement impacted estimators substantially, such that area covered and spacing of detectors (e.g. cameras, traps, etc.) must reflect movement characteristics of the focal species to reduce bias in estimates of movement and thus density.« less

Analysis of Multi-Flight Common Routes for Traffic Flow Management

NASA Technical Reports Server (NTRS)

Sheth, Kapil; Clymer, Alexis; Morando, Alex; Shih, Fu-Tai

2016-01-01

When severe convective weather requires rerouting aircraft, FAA traffic managers employ severe weather avoidance plans (e.g., Playbook routes, Coded Departure Routes, etc.) These routes provide pilots with safe paths around weather-affected regions, and provide controllers with predictable, and often well-established flight plans. However, they often introduce large deviations to the nominal flight plans, which may not be necessary as weather conditions change. If and when the imposed traffic management initiatives (TMIs) become stale, updated shorter path flight trajectories may be found en route, providing significant time-savings to the affected flights. Multiple Flight Common Routes (MFCR) is a concept that allows multiple flights that are within a specified proximity or region, to receive updated shorter flight plans in an operationally efficient manner. MFCR is believed to provide benefits to the National Airspace System (NAS) by allowing traffic managers to update several flight plans of en route aircraft simultaneously, reducing operational workload within the TMUs of all affected ARTCCs. This paper will explore some aspects of the MFCR concept by analyzing multiple flights that have been selected for rerouting by the NAS Constraint Evaluation and Notification Tool (NASCENT). Various methods of grouping aircraft with common or similar routes will be presented, along with a comparison of the efficacy of these methods.

Rapid Harmonic Analysis of Piezoelectric MEMS Resonators.

PubMed

Puder, Jonathan M; Pulskamp, Jeffrey S; Rudy, Ryan Q; Cassella, Cristian; Rinaldi, Matteo; Chen, Guofeng; Bhave, Sunil A; Polcawich, Ronald G

2018-06-01

This paper reports on a novel simulation method combining the speed of analytical evaluation with the accuracy of finite-element analysis (FEA). This method is known as the rapid analytical-FEA technique (RAFT). The ability of the RAFT to accurately predict frequency response orders of magnitude faster than conventional simulation methods while providing deeper insights into device design not possible with other types of analysis is detailed. Simulation results from the RAFT across wide bandwidths are compared to measured results of resonators fabricated with various materials, frequencies, and topologies with good agreement. These include resonators targeting beam extension, disk flexure, and Lamé beam modes. An example scaling analysis is presented and other applications enabled are discussed as well. The supplemental material includes example code for implementation in ANSYS, although any commonly employed FEA package may be used.

Using Simulation Technique to overcome the multi-collinearity problem for estimating fuzzy linear regression parameters.

NASA Astrophysics Data System (ADS)

Mansoor Gorgees, Hazim; Hilal, Mariam Mohammed

2018-05-01

Fatigue cracking is one of the common types of pavement distresses and is an indicator of structural failure; cracks allow moisture infiltration, roughness, may further deteriorate to a pothole. Some causes of pavement deterioration are: traffic loading; environment influences; drainage deficiencies; materials quality problems; construction deficiencies and external contributors. Many researchers have made models that contain many variables like asphalt content, asphalt viscosity, fatigue life, stiffness of asphalt mixture, temperature and other parameters that affect the fatigue life. For this situation, a fuzzy linear regression model was employed and analyzed by using the traditional methods and our proposed method in order to overcome the multi-collinearity problem. The total spread error was used as a criterion to compare the performance of the studied methods. Simulation program was used to obtain the required results.

Microbial sequencing methods for monitoring of anaerobic treatment of antibiotics to optimize performance and prevent system failure.

PubMed

Aydin, Sevcan

2016-06-01

As a result of developments in molecular technologies and the use of sequencing technologies, the analyses of the anaerobic microbial community in biological treatment process has become increasingly prevalent. This review examines the ways in which microbial sequencing methods can be applied to achieve an extensive understanding of the phylogenetic and functional characteristics of microbial assemblages in anaerobic reactor if the substrate is contaminated by antibiotics which is one of the most important toxic compounds. It will discuss some of the advantages and disadvantages associated with microbial sequencing techniques that are more commonly employed and will assess how a combination of the existing methods may be applied to develop a more comprehensive understanding of microbial communities and improve the validity and depth of the results for the enhancement of the stability of anaerobic reactors.

Simulation of elastic wave propagation using cellular automata and peridynamics, and comparison with experiments

DOE PAGES

Nishawala, Vinesh V.; Ostoja-Starzewski, Martin; Leamy, Michael J.; ...

2015-09-10

Peridynamics is a non-local continuum mechanics formulation that can handle spatial discontinuities as the governing equations are integro-differential equations which do not involve gradients such as strains and deformation rates. This paper employs bond-based peridynamics. Cellular Automata is a local computational method which, in its rectangular variant on interior domains, is mathematically equivalent to the central difference finite difference method. However, cellular automata does not require the derivation of the governing partial differential equations and provides for common boundary conditions based on physical reasoning. Both methodologies are used to solve a half-space subjected to a normal load, known as Lamb’smore » Problem. The results are compared with theoretical solution from classical elasticity and experimental results. Furthermore, this paper is used to validate our implementation of these methods.« less

Experiencing Term-Time Employment as a Non-Traditional Aged University Student: A Welsh Study

ERIC Educational Resources Information Center

Mercer, Jenny; Clay, James; Etheridge, Leanne

2016-01-01

Engaging in term-time employment appears to be becoming a common feature of contemporary UK student life. This study examined the ways in which a cohort of full-time non-traditional aged students negotiated paid employment whilst pursuing a full-time higher education course in Wales. Taking a qualitative approach to explore this further,…

Supporting Youth Transitioning out of Foster Care. Issue Brief 3: Employment Programs. OPRE Report No. 2014-70

ERIC Educational Resources Information Center

Edelstein, Sara; Lowenstein, Christopher

2014-01-01

This issue brief is one of three that focus on programs providing services to youth transitioning out of foster care in three common service domains: education, employment, and financial literacy and asset building. This brief highlights why employment services are important to youth currently or formerly in foster care, what we know about the…

University Studies as a Side Job: Causes and Consequences of Massive Student Employment in Estonia

ERIC Educational Resources Information Center

Beerkens, Maarja; Magi, Eve; Lill, Liis

2011-01-01

Student employment is increasingly common in many countries. Compared to earlier decades, not only more students work but they also work longer hours. Among European countries Estonia is one of the clear "leaders" in student employment. This study uses survey data from 2,496 students in Estonian public and private universities to examine…

Credentials in Context: The Meaning and Use of Associate Degrees in the Employment of IT Technicians

ERIC Educational Resources Information Center

Van Noy, Michelle

2011-01-01

Educational credentials are clearly linked to economic success, but the reasons for this link are not clear. Common theoretical approaches provide explanations but lack direct employer perspectives on credentials' meaning and the context in which employers make sense of credentials. In this study, I used an alternative perspective based in Meyer's…

Women's experiences of developing musculoskeletal diseases: employment challenges and policy recommendations.

PubMed

Crooks, Valorie A

2007-07-30

To answer three specific questions: (i) How do women experience the workplace after the onset of a musculoskeletal disease; (ii) What employment policy and programme suggestions can they offer for ways to better support chronically ill women in their abilities to maintain workforce participation; and (iii) How are these women's employment policy and programme recommendations informed by their own lived experiences and desires? In-depth interviews were conducted with 18 women who had developed musculoskeletal diseases while involved in the labour market. Data were coded and analysed thematically. Participants identified three common workplace barriers experienced and three types of workplace accommodations commonly requested. They offered four specific employment policy and programme recommendations for ways to better support women who develop musculoskeletal diseases in maintaining labour market participation. It is found that their employment policy and programme recommendations are informed by their own experiences in the workplace and desires for being supported in maintaining involvement in paid labour. Creating employment programmes and policies that support chronically ill women in their attempts to remain involved in the workforce based on how much paid labour they are able to perform and where they are best able to work is of the utmost importance.

Rapid on-site detection of ephedrine and its analogues used as adulterants in slimming dietary supplements by TLC-SERS.

PubMed

Lv, Diya; Cao, Yan; Lou, Ziyang; Li, Shujin; Chen, Xiaofei; Chai, Yifeng; Lu, Feng

2015-02-01

Ephedrine and its analogues are in the list of prohibited substance in adulteration to botanical dietary supplements (BDS) for their uncontrollable stimulating side effects. However, they were always adulterated illegally in BDS to promote losing weight. In order to avoid detection, various kinds of ephedrine analogues were added rather than ephedrine itself. This has brought about great difficulties in authentication of BDS. In this study, we put forward for the first time a method which combined thin-layer chromatography (TLC) and surface-enhanced Raman scattering (SERS) to directly identify trace adulterant. Ephedrine, pseudoephedrine, methylephedrine, and norephedrine were mixed and used in this method to develop an analytical model. As a result, the four analogues were separated efficiently in TLC analysis, and trace-components and low-background SERS detection was realized. The limit of detection (LOD) of the four analogues was 0.01 mg/mL. Eight common Raman peaks (△υ = 620, 1003, 1030, 1159, 1181, 1205, 1454, 1603 cm(-1)) were extracted experimentally and statistically to characterize the common feature of ephedrine analogues. A TLC-SERS method coupled with common-peak model was adopted to examine nine practical samples, two of which were found to be adulterated with ephedrine analogues. Identification results were then confirmed by UPLC-QTOF/MS analysis. The proposed method was simple, rapid, and accurate and can also be employed to trace adulterant identification even when there are no available reference derivatives on-site or unknown types of ephedrine analogues are adulterated.

Nonlinear inversion of resistivity sounding data for 1-D earth models using the Neighbourhood Algorithm

NASA Astrophysics Data System (ADS)

Ojo, A. O.; Xie, Jun; Olorunfemi, M. O.

2018-01-01

To reduce ambiguity related to nonlinearities in the resistivity model-data relationships, an efficient direct-search scheme employing the Neighbourhood Algorithm (NA) was implemented to solve the 1-D resistivity problem. In addition to finding a range of best-fit models which are more likely to be global minimums, this method investigates the entire multi-dimensional model space and provides additional information about the posterior model covariance matrix, marginal probability density function and an ensemble of acceptable models. This provides new insights into how well the model parameters are constrained and make assessing trade-offs between them possible, thus avoiding some common interpretation pitfalls. The efficacy of the newly developed program is tested by inverting both synthetic (noisy and noise-free) data and field data from other authors employing different inversion methods so as to provide a good base for comparative performance. In all cases, the inverted model parameters were in good agreement with the true and recovered model parameters from other methods and remarkably correlate with the available borehole litho-log and known geology for the field dataset. The NA method has proven to be useful whilst a good starting model is not available and the reduced number of unknowns in the 1-D resistivity inverse problem makes it an attractive alternative to the linearized methods. Hence, it is concluded that the newly developed program offers an excellent complementary tool for the global inversion of the layered resistivity structure.

Development of a Method for Evaluating Floor Dry-Cleanability from Wheat Flour in the Food Industry.

PubMed

Barreca, F; Cardinali, G D; Borgese, E; Russo, M

2017-04-01

Many productive processes are characterized by inadequate protocols of sanitation that increase the possibility of proliferation of microbial contaminants, especially on surfaces. The use of this method for evaluating the degree of floor cleanability in agri-food companies is important not only to reduce the risk of contamination of products, but also to provide companies with a tool to identify critical issues. The method is based on the usage of bicinchoninic acid assay (BCA) in a solution at a 1:50 ratio of Cu 2+ /BCA, which is ideal for detecting the amount of proteins contained in wheat flour residues on industrial flooring. Spectrophotometric analysis allowed identifying maximum absorbance values at 562 nm for different protein concentrations, although the construction of a regression function led to the definition of the intervals of evaluation corresponding to different degrees of cleanliness from residues of wheat flour. The results of the absorbance curves, obtained by applying the proposed evaluation method to 6 tiles commonly used in agri-food buildings, showed the clear persistence of food material on 2 tiles with surface relief. In particular, such tiles showed a higher presence of proteins, with a level of contamination 440% higher. Furthermore, a robotic system was designed to standardize the cleaning method commonly employed in agri-food companies to remove solid particles from flooring. © 2017 Institute of Food Technologists®.

A Kenyan perspective on the use of animals in science education and scientific research in Africa and prospects for improvement

PubMed Central

Kimwele, Charles; Matheka, Duncan; Ferdowsian, Hope

2011-01-01

Introduction Animal experimentation is common in Africa, a region that accords little priority on animal protection in comparison to economic and social development. The current study aimed at investigating the prevalence of animal experimentation in Kenya, and to review shortfalls in policy, legislation, implementation and enforcement that result in inadequate animal care in Kenya and other African nations. Methods Data was collected using questionnaires, administered at 39 highly ranked academic and research institutions aiming to identify those that used animals, their sources of animals, and application of the three Rs. Perceived challenges to the use of non-animal alternatives and common methods of euthanasia were also queried. Data was analyzed using Epidata, SPSS 16.0 and Microsoft Excel. Results Thirty-eight (97.4%) of thirty-nine institutions reported using animals for education and/or research. Thirty (76.9%) institutions reported using analgesics or anesthetics on a regular basis. Thirteen (33.3%) institutions regularly used statistical methods to minimize the use of animals. Overall, sixteen (41.0%) institutions explored the use of alternatives to animals such as cell cultures and computer simulation techniques, with one (2.6%) academic institution having completely replaced animals with computer modeling, manikins and visual illustrations. The commonest form of euthanasia employed was chloroform administration, reportedly in fourteen (29.8%) of 47 total methods (some institutions used more than one method). Twenty-eight (71.8%) institutions had no designated ethics committee to review or monitor protocols using animals. Conclusion Animals are commonly used in academic and research institutions in Kenya. The relative lack of ethical guidance and oversight regarding the use of animals in research and education presents significant concerns. PMID:22355442

Application of enzymes in the production of RTD black tea beverages: a review.

PubMed

Kumar, Chandini S; Subramanian, R; Rao, L Jaganmohan

2013-01-01

Ready-to-drink (RTD) tea is a popular beverage in many countries. Instability due to development of haze and formation of tea cream is the common problem faced in the production of RTD black tea beverages. Thus decreaming is an important step in the process to meet the cold stability requirements of the product. Enzymatic decreaming approaches overcome some of the disadvantages associated with other conventional decreaming methods such as cold water extraction, chill decreaming, chemical stabilization, and chemical solubilization. Enzyme treatments have been attempted at three stages of black tea processing, namely, enzymatic treatment to green tea and conversion to black tea, enzymatic treatment to black tea followed by extraction, and enzymatic clarification of extract. Tannase is the most commonly employed enzyme (tannin acyl hydrolase EC 3.1.1.20) aiming at improving cold water extractability/solubility and decreasing tea cream formation as well as improving the clarity. The major enzymatic methods proposed for processing black tea having a direct or indirect bearing on RTD tea production, have been discussed along with their relative advantages and limitations.

Significantly improved precision of cell migration analysis in time-lapse video microscopy through use of a fully automated tracking system

PubMed Central

2010-01-01

Background Cell motility is a critical parameter in many physiological as well as pathophysiological processes. In time-lapse video microscopy, manual cell tracking remains the most common method of analyzing migratory behavior of cell populations. In addition to being labor-intensive, this method is susceptible to user-dependent errors regarding the selection of "representative" subsets of cells and manual determination of precise cell positions. Results We have quantitatively analyzed these error sources, demonstrating that manual cell tracking of pancreatic cancer cells lead to mis-calculation of migration rates of up to 410%. In order to provide for objective measurements of cell migration rates, we have employed multi-target tracking technologies commonly used in radar applications to develop fully automated cell identification and tracking system suitable for high throughput screening of video sequences of unstained living cells. Conclusion We demonstrate that our automatic multi target tracking system identifies cell objects, follows individual cells and computes migration rates with high precision, clearly outperforming manual procedures. PMID:20377897

Suicidality in the veterinary profession: interview study of veterinarians with a history of suicidal ideation or behavior.

PubMed

Platt, Belinda; Hawton, Keith; Simkin, Sue; Dean, Rachel; Mellanby, Richard J

2012-01-01

Suicide rates are elevated in the veterinary profession in several countries, yet little is known about possible contributory and preventive factors. To obtain information from veterinarians with a history of suicidal ideation or behavior about the factors associated with suicidality in their profession. We conducted a mixed-methods interview study with 21 UK veterinarians who had attempted suicide or reported recent suicidal ideation. Interview topics included work and nonwork contributory factors, coping mechanisms, and preventive factors. Self-poisoning was the most common method used or considered by participants. Common contributory factors were workplace relationships, career concerns, patient issues, number of hours and volume of work, and responsibility, although two-thirds of participants reported co-occurring difficult life events. Around half had received a psychiatric diagnosis following their suicidal behavior. Several possible preventive measures were suggested by participants. Several work- and non-work-related contributory factors to suicidality in the veterinary profession were identified. Future preventive measures may involve better promotion of support services, formal support for recent graduates, and improving employers' attitudes toward work-life balance.

Data collection and assessment of commonly consumed foods and recipes in six geo-political zones in Nigeria: important for the development of a National Food Composition Database and Dietary Assessment.

PubMed

Ene-Obong, Henrietta N; Sanusi, Rasaki A; Udenta, Elizabeth A; Williams, Ima O; Anigo, Kola M; Chibuzo, Elizabeth C; Aliyu, Hassan M; Ekpe, Onot O; Davidson, Gloria I

2013-10-01

A cross-sectional study was undertaken to collect and assess commonly consumed foods/recipes from the six geopolitical zones in Nigeria for the production of food composition database (FCDB) for dietary assessment. Communities used were selected using a multi-stage sampling plan. Focus group discussions, interviews, recipe documentation, food preparations and literature reviews were employed. Qualitative methods were used to analyse and present data. SWOT (strengths, weaknesses, opportunities, and threats) analysis was used to evaluate the project. A total of 322 recipes were collected out of which 110 were soups. Food consumption patterns across the geographical zones were found to be changing. Variations in recipes and methods of preparation of similar foods were observed. Factors to be considered in the development of a country-specific FCDB were identified. There were challenges with the use of values reported in literature for Nigerian foods. The study justifies the need for a country-specific FCDB that will include traditional recipes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Rare or rarely detected? Ceraceosorus guamensis sp. nov.: a second described species of Ceraceosorales and the potential for underdetection of rare lineages with common sampling techniques.

PubMed

Kijpornyongpan, Teeratas; Catherine Aime, M

2016-08-01

Ceraceosorales is a monotypic order in Ustilaginomycotina. Its namesake, Ceraceosorus bombacis, was described as a phytopathogen of Bombax ceiba in India. In this study, we describe Ceraceosorus guamensis sp. nov., collected on the South Pacific island of Guam, which appears to represent the second isolation of any member of this order in over 40 years. Ceraceosorus species are monokaryotic and filamentous in culture, producing conidia on potato dextrose agar. However, both species behave yeast-like when cultured on corn meal agar. The internal transcribed spacer (ITS) region (spanning the ITS1-5.8S-ITS2) in both species of Ceraceosorus is highly heterogeneous containing multiple disparate copies that can vary intragenomically by up to 3.5 %. Moreover, this region could not be amplified using the fungal ITS primers most frequently used for culture-independent methods of assessing fungal biodiversity. This fact, combined with the extremely slow growth rates on commonly employed media, may indicate that members of this lineage are potentially underdetected by current sampling methods.

Assessment of surgical competence in North American graduate periodontics programs: a survey of current practices.

PubMed

Ghiabi, Edmond; Taylor, K Lynn

2010-08-01

This cross-sectional study was designed to document the methods utilized by North American graduate periodontics programs in assessing their residents' surgical skills. A survey of clinical skills assessment was mailed to directors of all fifty-eight graduate periodontics programs in Canada and the United States. Thirty-four programs (59 percent) responded. The data collected were analyzed using SPSS version 15.0. The results demonstrate that the most common practice for providing feedback and documenting residents' surgical skills in the programs surveyed was daily one-on-one verbal feedback given by an instructor. The next two most commonly reported methods were a standard checklist developed at program level and a combination of a checklist and verbal comments. The majority of the programs reported that the instructors met collectively once per term to evaluate the residents' progress. The results suggest that graduate periodontics programs provide their residents frequent opportunities for daily practice with verbal feedback from instructors. However, assessment strategies identified in other health professions as beneficial in fostering the integration of clinical skills practices are not employed.

Numerical Analysis of Crack Tip Plasticity and History Effects under Mixed Mode Conditions

NASA Astrophysics Data System (ADS)

Lopez-Crespo, Pablo; Pommier, Sylvie

The plastic behaviour in the crack tip region has a strong influence on the fatigue life of engineering components. In general, residual stresses developed as a consequence of the plasticity being constrained around the crack tip have a significant role on both the direction of crack propagation and the propagation rate. Finite element methods (FEM) are commonly employed in order to model plasticity. However, if millions of cycles need to be modelled to predict the fatigue behaviour of a component, the method becomes computationally too expensive. By employing a multiscale approach, very precise analyses computed by FEM can be brought to a global scale. The data generated using the FEM enables us to identify a global cyclic elastic-plastic model for the crack tip region. Once this model is identified, it can be employed directly, with no need of additional FEM computations, resulting in fast computations. This is done by partitioning local displacement fields computed by FEM into intensity factors (global data) and spatial fields. A Karhunen-Loeve algorithm developed for image processing was employed for this purpose. In addition, the partitioning is done such as to distinguish into elastic and plastic components. Each of them is further divided into opening mode and shear mode parts. The plastic flow direction was determined with the above approach on a centre cracked panel subjected to a wide range of mixed-mode loading conditions. It was found to agree well with the maximum tangential stress criterion developed by Erdogan and Sih, provided that the loading direction is corrected for residual stresses. In this approach, residual stresses are measured at the global scale through internal intensity factors.

Efficient terrestrial laser scan segmentation exploiting data structure

NASA Astrophysics Data System (ADS)

Mahmoudabadi, Hamid; Olsen, Michael J.; Todorovic, Sinisa

2016-09-01

New technologies such as lidar enable the rapid collection of massive datasets to model a 3D scene as a point cloud. However, while hardware technology continues to advance, processing 3D point clouds into informative models remains complex and time consuming. A common approach to increase processing efficiently is to segment the point cloud into smaller sections. This paper proposes a novel approach for point cloud segmentation using computer vision algorithms to analyze panoramic representations of individual laser scans. These panoramas can be quickly created using an inherent neighborhood structure that is established during the scanning process, which scans at fixed angular increments in a cylindrical or spherical coordinate system. In the proposed approach, a selected image segmentation algorithm is applied on several input layers exploiting this angular structure including laser intensity, range, normal vectors, and color information. These segments are then mapped back to the 3D point cloud so that modeling can be completed more efficiently. This approach does not depend on pre-defined mathematical models and consequently setting parameters for them. Unlike common geometrical point cloud segmentation methods, the proposed method employs the colorimetric and intensity data as another source of information. The proposed algorithm is demonstrated on several datasets encompassing variety of scenes and objects. Results show a very high perceptual (visual) level of segmentation and thereby the feasibility of the proposed algorithm. The proposed method is also more efficient compared to Random Sample Consensus (RANSAC), which is a common approach for point cloud segmentation.

Learning a common dictionary for subject-transfer decoding with resting calibration.

PubMed

Morioka, Hiroshi; Kanemura, Atsunori; Hirayama, Jun-ichiro; Shikauchi, Manabu; Ogawa, Takeshi; Ikeda, Shigeyuki; Kawanabe, Motoaki; Ishii, Shin

2015-05-01

Brain signals measured over a series of experiments have inherent variability because of different physical and mental conditions among multiple subjects and sessions. Such variability complicates the analysis of data from multiple subjects and sessions in a consistent way, and degrades the performance of subject-transfer decoding in a brain-machine interface (BMI). To accommodate the variability in brain signals, we propose 1) a method for extracting spatial bases (or a dictionary) shared by multiple subjects, by employing a signal-processing technique of dictionary learning modified to compensate for variations between subjects and sessions, and 2) an approach to subject-transfer decoding that uses the resting-state activity of a previously unseen target subject as calibration data for compensating for variations, eliminating the need for a standard calibration based on task sessions. Applying our methodology to a dataset of electroencephalography (EEG) recordings during a selective visual-spatial attention task from multiple subjects and sessions, where the variability compensation was essential for reducing the redundancy of the dictionary, we found that the extracted common brain activities were reasonable in the light of neuroscience knowledge. The applicability to subject-transfer decoding was confirmed by improved performance over existing decoding methods. These results suggest that analyzing multisubject brain activities on common bases by the proposed method enables information sharing across subjects with low-burden resting calibration, and is effective for practical use of BMI in variable environments. Copyright © 2015 Elsevier Inc. All rights reserved.

A data-driven approach for denoising GNSS position time series

NASA Astrophysics Data System (ADS)

Li, Yanyan; Xu, Caijun; Yi, Lei; Fang, Rongxin

2017-12-01

Global navigation satellite system (GNSS) datasets suffer from common mode error (CME) and other unmodeled errors. To decrease the noise level in GNSS positioning, we propose a new data-driven adaptive multiscale denoising method in this paper. Both synthetic and real-world long-term GNSS datasets were employed to assess the performance of the proposed method, and its results were compared with those of stacking filtering, principal component analysis (PCA) and the recently developed multiscale multiway PCA. It is found that the proposed method can significantly eliminate the high-frequency white noise and remove the low-frequency CME. Furthermore, the proposed method is more precise for denoising GNSS signals than the other denoising methods. For example, in the real-world example, our method reduces the mean standard deviation of the north, east and vertical components from 1.54 to 0.26, 1.64 to 0.21 and 4.80 to 0.72 mm, respectively. Noise analysis indicates that for the original signals, a combination of power-law plus white noise model can be identified as the best noise model. For the filtered time series using our method, the generalized Gauss-Markov model is the best noise model with the spectral indices close to - 3, indicating that flicker walk noise can be identified. Moreover, the common mode error in the unfiltered time series is significantly reduced by the proposed method. After filtering with our method, a combination of power-law plus white noise model is the best noise model for the CMEs in the study region.

Matrix interference evaluation employing GC and LC coupled to triple quadrupole tandem mass spectrometry.

PubMed

Uclés, S; Lozano, A; Sosa, A; Parrilla Vázquez, P; Valverde, A; Fernández-Alba, A R

2017-11-01

Gas and liquid chromatography coupled to triple quadrupole tandem mass spectrometry are currently the most powerful tools employed for the routine analysis of pesticide residues in food control laboratories. However, whatever the multiresidue extraction method, there will be a residual matrix effect making it difficult to identify/quantify some specific compounds in certain cases. Two main effects stand out: (i) co-elution with isobaric matrix interferents, which can be a major drawback for unequivocal identification, and therefore false negative detections, and (ii) signal suppression/enhancement, commonly called the "matrix effect", which may cause serious problems including inaccurate quantitation, low analyte detectability and increased method uncertainty. The aim of this analytical study is to provide a framework for evaluating the maximum expected errors associated with the matrix effects. The worst-case study contrived to give an estimation of the extreme errors caused by matrix effects when extraction/determination protocols are applied in routine multiresidue analysis. Twenty-five different blank matrices extracted with the four most common extraction methods used in routine analysis (citrate QuEChERS with/without PSA clean-up, ethyl acetate and the Dutch mini-Luke "NL" methods) were evaluated by both GC-QqQ-MS/MS and LC-QqQ-MS/MS. The results showed that the presence of matrix compounds with isobaric transitions to target pesticides was higher in GC than under LC in the experimental conditions tested. In a second study, the number of "potential" false negatives was evaluated. For that, ten matrices with higher percentages of natural interfering components were checked. Additionally, the results showed that for more than 90% of the cases, pesticide quantification was not affected by matrix-matched standard calibration when an interferent was kept constant along the calibration curve. The error in quantification depended on the concentration level. In a third study, the "matrix effect" was evaluated for each commodity/extraction method. Results showed 44% of cases with suppression/enhancement for LC and 93% of cases with enhancement for GC. Copyright © 2017 Elsevier B.V. All rights reserved.

Failure Assessment of Brazed Structures

NASA Technical Reports Server (NTRS)

Flom, Yuri

2012-01-01

Despite the great advances in analytical methods available to structural engineers, designers of brazed structures have great difficulties in addressing fundamental questions related to the loadcarrying capabilities of brazed assemblies. In this chapter we will review why such common engineering tools as Finite Element Analysis (FEA) as well as many well-established theories (Tresca, von Mises, Highest Principal Stress, etc) don't work well for the brazed joints. This chapter will show how the classic approach of using interaction equations and the less known Coulomb-Mohr failure criterion can be employed to estimate Margins of Safety (MS) in brazed joints.

Microfluidics-to-Mass Spectrometry: A review of coupling methods and applications

PubMed Central

Wang, Xue; Yi, Lian; Mukhitov, Nikita; Schrell, Adrian M.; Dhumpa, Raghuram; Roper, Michael G.

2014-01-01

Microfluidic devices offer great advantages in integrating sample processes, minimizing sample and reagent volumes, and increasing analysis speed, while mass spectrometry detection provides high information content, is sensitive, and can be used in quantitative analyses. The coupling of microfluidic devices to mass spectrometers is becoming more common with the strengths of both systems being combined to analyze precious and complex samples. This review summarizes select achievements published between 2010 – July 2014 in novel coupling between microfluidic devices and mass spectrometers. The review is subdivided by the types of ionization sources employed, and the different microfluidic systems used. PMID:25458901

Fourth Conference on Artificial Intelligence for Space Applications

NASA Technical Reports Server (NTRS)

Odell, Stephen L. (Compiler); Denton, Judith S. (Compiler); Vereen, Mary (Compiler)

1988-01-01

Proceedings of a conference held in Huntsville, Alabama, on November 15-16, 1988. The Fourth Conference on Artificial Intelligence for Space Applications brings together diverse technical and scientific work in order to help those who employ AI methods in space applications to identify common goals and to address issues of general interest in the AI community. Topics include the following: space applications of expert systems in fault diagnostics, in telemetry monitoring and data collection, in design and systems integration; and in planning and scheduling; knowledge representation, capture, verification, and management; robotics and vision; adaptive learning; and automatic programming.

Tailor-made resealable micro(bio)reactors providing easy integration of in situ sensors

NASA Astrophysics Data System (ADS)

Viefhues, Martina; Sun, Shiwen; Valikhani, Donya; Nidetzky, Bernd; Vrouwe, Elwin X.; Mayr, Torsten; Bolivar, Juan M.

2017-06-01

Flow microreactors utilizing immobilized enzymes are of great interest in biocatalysis development. Most of the common devices are permanently closed, single-use systems, which allow limited physical and chemical surface modifications and evaluation methods. In this paper we will present resealable flowcells that overcome these limitations and moreover allow a quick and easy integration of sensor systems, because of the use of modular building blocks. The devices were utilized to study the enzyme activity of glucose oxidase immobilized on chemically modified glass surfaces under flow conditions, employing integrated optical oxygen sensors for on-line monitoring.

Tolerancing aspheres based on manufacturing knowledge

NASA Astrophysics Data System (ADS)

Wickenhagen, S.; Kokot, S.; Fuchs, U.

2017-10-01

A standard way of tolerancing optical elements or systems is to perform a Monte Carlo based analysis within a common optical design software package. Although, different weightings and distributions are assumed they are all counting on statistics, which usually means several hundreds or thousands of systems for reliable results. Thus, employing these methods for small batch sizes is unreliable, especially when aspheric surfaces are involved. The huge database of asphericon was used to investigate the correlation between the given tolerance values and measured data sets. The resulting probability distributions of these measured data were analyzed aiming for a robust optical tolerancing process.

Tolerancing aspheres based on manufacturing statistics

NASA Astrophysics Data System (ADS)

Wickenhagen, S.; Möhl, A.; Fuchs, U.

2017-11-01

A standard way of tolerancing optical elements or systems is to perform a Monte Carlo based analysis within a common optical design software package. Although, different weightings and distributions are assumed they are all counting on statistics, which usually means several hundreds or thousands of systems for reliable results. Thus, employing these methods for small batch sizes is unreliable, especially when aspheric surfaces are involved. The huge database of asphericon was used to investigate the correlation between the given tolerance values and measured data sets. The resulting probability distributions of these measured data were analyzed aiming for a robust optical tolerancing process.

Multi-task feature learning by using trace norm regularization

NASA Astrophysics Data System (ADS)

Jiangmei, Zhang; Binfeng, Yu; Haibo, Ji; Wang, Kunpeng

2017-11-01

Multi-task learning can extract the correlation of multiple related machine learning problems to improve performance. This paper considers applying the multi-task learning method to learn a single task. We propose a new learning approach, which employs the mixture of expert model to divide a learning task into several related sub-tasks, and then uses the trace norm regularization to extract common feature representation of these sub-tasks. A nonlinear extension of this approach by using kernel is also provided. Experiments conducted on both simulated and real data sets demonstrate the advantage of the proposed approach.

Variation in passing standards for graduation-level knowledge items at UK medical schools.

PubMed

Taylor, Celia A; Gurnell, Mark; Melville, Colin R; Kluth, David C; Johnson, Neil; Wass, Val

2017-06-01

Given the absence of a common passing standard for students at UK medical schools, this paper compares independently set standards for common 'one from five' single-best-answer (multiple-choice) items used in graduation-level applied knowledge examinations and explores potential reasons for any differences. A repeated cross-sectional study was conducted. Participating schools were sent a common set of graduation-level items (55 in 2013-2014; 60 in 2014-2015). Items were selected against a blueprint and subjected to a quality review process. Each school employed its own standard-setting process for the common items. The primary outcome was the passing standard for the common items by each medical school set using the Angoff or Ebel methods. Of 31 invited medical schools, 22 participated in 2013-2014 (71%) and 30 (97%) in 2014-2015. Schools used a mean of 49 and 53 common items in 2013-2014 and 2014-2015, respectively, representing around one-third of the items in the examinations in which they were embedded. Data from 19 (61%) and 26 (84%) schools, respectively, met the inclusion criteria for comparison of standards. There were statistically significant differences in the passing standards set by schools in both years (effect sizes (f 2 ): 0.041 in 2013-2014 and 0.218 in 2014-2015; both p < 0.001). The interquartile range of standards was 5.7 percentage points in 2013-2014 and 6.5 percentage points in 2014-2015. There was a positive correlation between the relative standards set by schools in the 2 years (Pearson's r = 0.57, n = 18, p = 0.014). Time allowed per item, method of standard setting and timing of examination in the curriculum did not have a statistically significant impact on standards. Independently set standards for common single-best-answer items used in graduation-level examinations vary across UK medical schools. Further work to examine standard-setting processes in more detail is needed to help explain this variability and develop methods to reduce it. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Interviewing in Virtual Worlds: A Phenomenological Study Exploring the Success Factors of Job Applicants Utilizing Second Life to Gain Employment

ERIC Educational Resources Information Center

Koufoudakis-Whittington, Stefania

2014-01-01

This study explored the phenomenon of success factors of job applicants utilizing Second Life to gain employment. The study focused on identifying the perception of what qualified as a successful interview through the lived common experiences of 16 employment recruiters. The research problem was that a gap existed in scholarly research on…

The Hard-to-Employ--Who Are They? Perspectives on Training the Disadvantaged--The Hard-to-Employ. Personnel Services Review Series 2.

ERIC Educational Resources Information Center

Harrison, Don K.; Brown, Dorothy R.

The hard-to-employ, both urban and rural, share common characteristics of inadequate income, slum housing, inferior education, no medical attention, and lack of real job opportunities. The deficiencies dove-tail, and families are often afflicted with all. The picture may seem bleak, but there is optimism in reclamation of the so-called…

Laboratory and in vivo transport characterization of hollow fiber membranes and adjacent scar tissue that forms following their implantation in the central nervous system

NASA Astrophysics Data System (ADS)

Bridge, Michael John

Hollow fiber membrane (HFM) cell encapsulation devices use a semipermeable membrane to physically immunoisolate transplanted secretory cells from host tissues and high molecular weight solutes. Advantages inherent to macroencapsulation technology have led to extensive research towards their utilization for treating a wide range of disorders including a number of neurodegenerative diseases and diabetes. Although feasibility studies have already established the therapeutic potential of macroencapsulation technology, a common observation among these and later studies is diminishing therapeutic efficacy over a span of a few weeks following implantation of devices. Progress towards fulfilling the therapeutic potential of this technology initially recognized by investigators has potentially been hampered by inadequate diffusive transport characterization of membranes employed in studies. In addition, the potential effects of host tissue responses following central nervous system (CNS) implantation of these devices is completely unknown. To address these issues a membrane characterization instrument capable of efficiently characterizing the diffusive and convective transport properties of individual HFM segments, such as they are used in devices, was developed. The instrument was then employed to study the effects of ethanol exposure, a common sterilization method, on PAN-PVC membranes commonly used in CNS implantation macro encapsulation device studies. Lastly, the solute diffusivity properties of tissue that forms adjacent to the membranes of brain implanted transcranial access devices were investigated. Coinciding with this investigation was the development of a novel technique for examining the solute diffusivity properties in the extracellular spaces of CNS tissue.

Methods, applications, interpretations and challenges of interrupted time series (ITS) data: protocol for a scoping review.

PubMed

Ewusie, Joycelyne E; Blondal, Erik; Soobiah, Charlene; Beyene, Joseph; Thabane, Lehana; Straus, Sharon E; Hamid, Jemila S

2017-07-02

Interrupted time series (ITS) design involves collecting data across multiple time points before and after the implementation of an intervention to assess the effect of the intervention on an outcome. ITS designs have become increasingly common in recent times with frequent use in assessing impact of evidence implementation interventions. Several statistical methods are currently available for analysing data from ITS designs; however, there is a lack of guidance on which methods are optimal for different data types and on their implications in interpreting results. Our objective is to conduct a scoping review of existing methods for analysing ITS data, to summarise their characteristics and properties, as well as to examine how the results are reported. We also aim to identify gaps and methodological deficiencies. We will search electronic databases from inception until August 2016 (eg, MEDLINE and JSTOR). Two reviewers will independently screen titles, abstracts and full-text articles and complete the data abstraction. The anticipated outcome will be a summarised description of all the methods that have been used in analysing ITS data in health research, how those methods were applied, their strengths and limitations and the transparency of interpretation/reporting of the results. We will provide summary tables of the characteristics of the included studies. We will also describe the similarities and differences of the various methods. Ethical approval is not required for this study since we are just considering the methods used in the analysis and there will not be identifiable patient data. Results will be disseminated through open access peer-reviewed publications. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Single-step reinitialization and extending algorithms for level-set based multi-phase flow simulations

NASA Astrophysics Data System (ADS)

Fu, Lin; Hu, Xiangyu Y.; Adams, Nikolaus A.

2017-12-01

We propose efficient single-step formulations for reinitialization and extending algorithms, which are critical components of level-set based interface-tracking methods. The level-set field is reinitialized with a single-step (non iterative) "forward tracing" algorithm. A minimum set of cells is defined that describes the interface, and reinitialization employs only data from these cells. Fluid states are extrapolated or extended across the interface by a single-step "backward tracing" algorithm. Both algorithms, which are motivated by analogy to ray-tracing, avoid multiple block-boundary data exchanges that are inevitable for iterative reinitialization and extending approaches within a parallel-computing environment. The single-step algorithms are combined with a multi-resolution conservative sharp-interface method and validated by a wide range of benchmark test cases. We demonstrate that the proposed reinitialization method achieves second-order accuracy in conserving the volume of each phase. The interface location is invariant to reapplication of the single-step reinitialization. Generally, we observe smaller absolute errors than for standard iterative reinitialization on the same grid. The computational efficiency is higher than for the standard and typical high-order iterative reinitialization methods. We observe a 2- to 6-times efficiency improvement over the standard method for serial execution. The proposed single-step extending algorithm, which is commonly employed for assigning data to ghost cells with ghost-fluid or conservative interface interaction methods, shows about 10-times efficiency improvement over the standard method while maintaining same accuracy. Despite their simplicity, the proposed algorithms offer an efficient and robust alternative to iterative reinitialization and extending methods for level-set based multi-phase simulations.

Methods for studying medical device technology and practitioner cognition: the case of user-interface issues with infusion pumps.

PubMed

Schraagen, Jan Maarten; Verhoeven, Fenne

2013-02-01

The aims of this study were to investigate how a variety of research methods is commonly employed to study technology and practitioner cognition. User-interface issues with infusion pumps were selected as a case because of its relevance to patient safety. Starting from a Cognitive Systems Engineering perspective, we developed an Impact Flow Diagram showing the relationship of computer technology, cognition, practitioner behavior, and system failure in the area of medical infusion devices. We subsequently conducted a systematic literature review on user-interface issues with infusion pumps, categorized the studies in terms of methods employed, and noted the usability problems found with particular methods. Next, we assigned usability problems and related methods to the levels in the Impact Flow Diagram. Most study methods used to find user interface issues with infusion pumps focused on observable behavior rather than on how artifacts shape cognition and collaboration. A concerted and theory-driven application of these methods when testing infusion pumps is lacking in the literature. Detailed analysis of one case study provided an illustration of how to apply the Impact Flow Diagram, as well as how the scope of analysis may be broadened to include organizational and regulatory factors. Research methods to uncover use problems with technology may be used in many ways, with many different foci. We advocate the adoption of an Impact Flow Diagram perspective rather than merely focusing on usability issues in isolation. Truly advancing patient safety requires the systematic adoption of a systems perspective viewing people and technology as an ensemble, also in the design of medical device technology. Copyright © 2012 Elsevier Inc. All rights reserved.

A New Antigen Retrieval Technique for Human Brain Tissue

PubMed Central

Byne, William; Haroutunian, Vahram; García-Villanueva, Mercedes; Rábano, Alberto; García-Amado, María; Prensa, Lucía; Giménez-Amaya, José Manuel

2008-01-01

Immunohistochemical staining of tissues is a powerful tool used to delineate the presence or absence of an antigen. During the last 30 years, antigen visualization in human brain tissue has been significantly limited by the masking effect of fixatives. In the present study, we have used a new method for antigen retrieval in formalin-fixed human brain tissue and examined the effectiveness of this protocol to reveal masked antigens in tissues with both short and long formalin fixation times. This new method, which is based on the use of citraconic acid, has not been previously utilized in brain tissue although it has been employed in various other tissues such as tonsil, ovary, skin, lymph node, stomach, breast, colon, lung and thymus. Thus, we reported here a novel method to carry out immunohistochemical studies in free-floating human brain sections. Since fixation of brain tissue specimens in formaldehyde is a commonly method used in brain banks, this new antigen retrieval method could facilitate immunohistochemical studies of brains with prolonged formalin fixation times. PMID:18852880

Simplification of the DPPH assay for estimating the antioxidant activity of wine and wine by-products.

PubMed

Carmona-Jiménez, Yolanda; García-Moreno, M Valme; Igartuburu, Jose M; Garcia Barroso, Carmelo

2014-12-15

The DPPH assay is one of the most commonly employed methods for measuring antioxidant activity. Even though this method is considered very simple and efficient, it does present various limitations which make it complicated to perform. The range of linearity between the DPPH inhibition percentage and sample concentration has been studied with a view to simplifying the method for characterising samples of wine origin. It has been concluded that all the samples are linear in a range of inhibition below 40%, which allows the analysis to be simplified. A new parameter more appropriate for the simplification, the EC20, has been proposed to express the assay results. Additionally, the reaction time was analysed with the object of avoiding the need for kinetic studies in the method. The simplifications considered offer a more functional method, without significant errors, which could be used for routine analysis. Copyright © 2014 Elsevier Ltd. All rights reserved.

Prognostics of slurry pumps based on a moving-average wear degradation index and a general sequential Monte Carlo method

NASA Astrophysics Data System (ADS)

Wang, Dong; Tse, Peter W.

2015-05-01

Slurry pumps are commonly used in oil-sand mining for pumping mixtures of abrasive liquids and solids. These operations cause constant wear of slurry pump impellers, which results in the breakdown of the slurry pumps. This paper develops a prognostic method for estimating remaining useful life of slurry pump impellers. First, a moving-average wear degradation index is proposed to assess the performance degradation of the slurry pump impeller. Secondly, the state space model of the proposed health index is constructed. A general sequential Monte Carlo method is employed to derive the parameters of the state space model. The remaining useful life of the slurry pump impeller is estimated by extrapolating the established state space model to a specified alert threshold. Data collected from an industrial oil sand pump were used to validate the developed method. The results show that the accuracy of the developed method improves as more data become available.

Synergistic effects in the short-term preservation of hides with antiseptics and gamma radiation

NASA Astrophysics Data System (ADS)

Du Plessis, TA; Russell, AE; Stevens, RCB; Galloway, AC

The normal time lapse between the skinning and tanning processes of green hides necessitates the need for a short-term preservation technique to be employed. The most common method of bringing about such preservation is the coarse salting of the flesh side of hides. More recently the antiseptic treatment of hides was introduced to overcome the serious environmental pollution brought about by the salting process. The antiseptic treatment, however, must also be carefully controlled to avoid upsetting the biological breakdown processes in effluent plants. The gamma sterilization of such hides presents a non-polluting alternative to these methods. As the nature of this product demands excessively high radiation doses to be effective, which negatively influences the economics of the process and the physical properties of the resultant leather, a combination process employing radiation and antiseptics was investigated. It was observed that the radiation dose could be lowered from 50 kGy to 8 kGy in combination with certain antiseptics, whilst the required antiseptic concentration could be substantially lowered in the presence of radiation. The resultant leather was of an excellent quality whilst minimizing the environmental pollution problem.

An overview of the model integration process: From pre ...

EPA Pesticide Factsheets

Integration of models requires linking models which can be developed using different tools, methodologies, and assumptions. We performed a literature review with the aim of improving our understanding of model integration process, and also presenting better strategies for building integrated modeling systems. We identified five different phases to characterize integration process: pre-integration assessment, preparation of models for integration, orchestration of models during simulation, data interoperability, and testing. Commonly, there is little reuse of existing frameworks beyond the development teams and not much sharing of science components across frameworks. We believe this must change to enable researchers and assessors to form complex workflows that leverage the current environmental science available. In this paper, we characterize the model integration process and compare integration practices of different groups. We highlight key strategies, features, standards, and practices that can be employed by developers to increase reuse and interoperability of science software components and systems. The paper provides a review of the literature regarding techniques and methods employed by various modeling system developers to facilitate science software interoperability. The intent of the paper is to illustrate the wide variation in methods and the limiting effect the variation has on inter-framework reuse and interoperability. A series of recommendation

The Untold Story: Examining Ontario's Community Health Centres' Initiatives to Address Upstream Determinants of Health

PubMed Central

Collins, Patricia A.; Resendes, Sarah J.; Dunn, James R.

2014-01-01

Background: Unlike traditional primary care centres, part of the Community Health Centre (CHC) mandate is to address upstream health determinants. In Ontario, CHCs refer to these activities as Community Initiatives (CIs); yet, little is known about how CIs operate. The objective of this study was to examine the scope, resource requirements, partnerships, successes and challenges among selected Ontario CIs. Methods: We conducted qualitative interviews with 10 CHC staff members representing 11 CIs across Ontario. CIs were identified through an online inventory, recruited by e-mail and interviewed between March and June 2011. Results: Most CIs aim to increase community participation, while addressing social isolation and poverty. They draw minimal financial resources from their CHC, and employ highly skilled staff to support implementation. Most enlist support from various partners, and use numerous methods for community engagement. Successes include improved community relations, increased opportunities for education and employment and rewarding partnerships, while insufficient funding was a commonly identified challenge. Conclusions: Despite minimal attention from researchers and funders, our findings suggest that CIs play key capacity-building roles in vulnerable communities across Ontario, and warrant further investigation. PMID:25410693

A wideband magnetoresistive sensor for monitoring dynamic fault slip in laboratory fault friction experiments

USGS Publications Warehouse

Kilgore, Brian D.

2017-01-01

A non-contact, wideband method of sensing dynamic fault slip in laboratory geophysical experiments employs an inexpensive magnetoresistive sensor, a small neodymium rare earth magnet, and user built application-specific wideband signal conditioning. The magnetoresistive sensor generates a voltage proportional to the changing angles of magnetic flux lines, generated by differential motion or rotation of the near-by magnet, through the sensor. The performance of an array of these sensors compares favorably to other conventional position sensing methods employed at multiple locations along a 2 m long × 0.4 m deep laboratory strike-slip fault. For these magnetoresistive sensors, the lack of resonance signals commonly encountered with cantilever-type position sensor mounting, the wide band response (DC to ≈ 100 kHz) that exceeds the capabilities of many traditional position sensors, and the small space required on the sample, make them attractive options for capturing high speed fault slip measurements in these laboratory experiments. An unanticipated observation of this study is the apparent sensitivity of this sensor to high frequency electomagnetic signals associated with fault rupture and (or) rupture propagation, which may offer new insights into the physics of earthquake faulting.

Plant Identification Based on Leaf Midrib Cross-Section Images Using Fractal Descriptors.

PubMed

da Silva, Núbia Rosa; Florindo, João Batista; Gómez, María Cecilia; Rossatto, Davi Rodrigo; Kolb, Rosana Marta; Bruno, Odemir Martinez

2015-01-01

The correct identification of plants is a common necessity not only to researchers but also to the lay public. Recently, computational methods have been employed to facilitate this task, however, there are few studies front of the wide diversity of plants occurring in the world. This study proposes to analyse images obtained from cross-sections of leaf midrib using fractal descriptors. These descriptors are obtained from the fractal dimension of the object computed at a range of scales. In this way, they provide rich information regarding the spatial distribution of the analysed structure and, as a consequence, they measure the multiscale morphology of the object of interest. In Biology, such morphology is of great importance because it is related to evolutionary aspects and is successfully employed to characterize and discriminate among different biological structures. Here, the fractal descriptors are used to identify the species of plants based on the image of their leaves. A large number of samples are examined, being 606 leaf samples of 50 species from Brazilian flora. The results are compared to other imaging methods in the literature and demonstrate that fractal descriptors are precise and reliable in the taxonomic process of plant species identification.

Probability genotype imputation method and integrated weighted lasso for QTL identification.

PubMed

Demetrashvili, Nino; Van den Heuvel, Edwin R; Wit, Ernst C

2013-12-30

Many QTL studies have two common features: (1) often there is missing marker information, (2) among many markers involved in the biological process only a few are causal. In statistics, the second issue falls under the headings "sparsity" and "causal inference". The goal of this work is to develop a two-step statistical methodology for QTL mapping for markers with binary genotypes. The first step introduces a novel imputation method for missing genotypes. Outcomes of the proposed imputation method are probabilities which serve as weights to the second step, namely in weighted lasso. The sparse phenotype inference is employed to select a set of predictive markers for the trait of interest. Simulation studies validate the proposed methodology under a wide range of realistic settings. Furthermore, the methodology outperforms alternative imputation and variable selection methods in such studies. The methodology was applied to an Arabidopsis experiment, containing 69 markers for 165 recombinant inbred lines of a F8 generation. The results confirm previously identified regions, however several new markers are also found. On the basis of the inferred ROC behavior these markers show good potential for being real, especially for the germination trait Gmax. Our imputation method shows higher accuracy in terms of sensitivity and specificity compared to alternative imputation method. Also, the proposed weighted lasso outperforms commonly practiced multiple regression as well as the traditional lasso and adaptive lasso with three weighting schemes. This means that under realistic missing data settings this methodology can be used for QTL identification.

21 CFR 101.105 - Declaration of net quantity of contents when exempt.

Code of Federal Regulations, 2010 CFR

2010-04-01

... individual units of the foods as will provide such information. (d) The declaration may contain common or decimal fractions. A common fraction shall be in terms of halves, quarters, eighths, sixteenths, or thirty... employing different common fractions in the net quantity declaration of a particular commodity, they may be...

Development of an Agent-Based Model (ABM) to Simulate the Immune System and Integration of a Regression Method to Estimate the Key ABM Parameters by Fitting the Experimental Data

PubMed Central

Tong, Xuming; Chen, Jinghang; Miao, Hongyu; Li, Tingting; Zhang, Le

2015-01-01

Agent-based models (ABM) and differential equations (DE) are two commonly used methods for immune system simulation. However, it is difficult for ABM to estimate key parameters of the model by incorporating experimental data, whereas the differential equation model is incapable of describing the complicated immune system in detail. To overcome these problems, we developed an integrated ABM regression model (IABMR). It can combine the advantages of ABM and DE by employing ABM to mimic the multi-scale immune system with various phenotypes and types of cells as well as using the input and output of ABM to build up the Loess regression for key parameter estimation. Next, we employed the greedy algorithm to estimate the key parameters of the ABM with respect to the same experimental data set and used ABM to describe a 3D immune system similar to previous studies that employed the DE model. These results indicate that IABMR not only has the potential to simulate the immune system at various scales, phenotypes and cell types, but can also accurately infer the key parameters like DE model. Therefore, this study innovatively developed a complex system development mechanism that could simulate the complicated immune system in detail like ABM and validate the reliability and efficiency of model like DE by fitting the experimental data. PMID:26535589

An image-based reaction field method for electrostatic interactions in molecular dynamics simulations of aqueous solutions

NASA Astrophysics Data System (ADS)

Lin, Yuchun; Baumketner, Andrij; Deng, Shaozhong; Xu, Zhenli; Jacobs, Donald; Cai, Wei

2009-10-01

In this paper, a new solvation model is proposed for simulations of biomolecules in aqueous solutions that combines the strengths of explicit and implicit solvent representations. Solute molecules are placed in a spherical cavity filled with explicit water, thus providing microscopic detail where it is most needed. Solvent outside of the cavity is modeled as a dielectric continuum whose effect on the solute is treated through the reaction field corrections. With this explicit/implicit model, the electrostatic potential represents a solute molecule in an infinite bath of solvent, thus avoiding unphysical interactions between periodic images of the solute commonly used in the lattice-sum explicit solvent simulations. For improved computational efficiency, our model employs an accurate and efficient multiple-image charge method to compute reaction fields together with the fast multipole method for the direct Coulomb interactions. To minimize the surface effects, periodic boundary conditions are employed for nonelectrostatic interactions. The proposed model is applied to study liquid water. The effect of model parameters, which include the size of the cavity, the number of image charges used to compute reaction field, and the thickness of the buffer layer, is investigated in comparison with the particle-mesh Ewald simulations as a reference. An optimal set of parameters is obtained that allows for a faithful representation of many structural, dielectric, and dynamic properties of the simulated water, while maintaining manageable computational cost. With controlled and adjustable accuracy of the multiple-image charge representation of the reaction field, it is concluded that the employed model achieves convergence with only one image charge in the case of pure water. Future applications to pKa calculations, conformational sampling of solvated biomolecules and electrolyte solutions are briefly discussed.

Health and social support services to HIV/AIDS infected individuals in Tanzania: employees and employers perceptions.

PubMed

Kassile, Telemu; Anicetus, Honest; Kukula, Raphael; Mmbando, Bruno P

2014-06-20

HIV is a major public health problem in the world, especially in sub-Saharan Africa. It often leads to loss of productive labour and disruption of existing social support system which results in deterioration of population health. This poses a great challenge to infected people in meeting their essential goods and services. This paper examines health and social support services provided by employers to HIV/AIDS infected employees in Tanzania. This was a cross-sectional study, which employed qualitative and quantitative methods in data collection and analysis. Structured questionnaires and in-depth interviews were used to assess the health and social support services provision at employers and employees perspectives. The study participants were employees and employers from public and private organizations. A total of 181 employees and 23 employers from 23 workplaces aged between 18-68 years were involved. The results show that 23.8% (i.e., 20.4% males and 27.3% females) of the employees had at least one member of the family or close relatives living with HIV at the time of the study. Fifty six percent of the infected employees reported to have been receiving health or social support from their employers. Employees' responses were consistent with those reported by their employers. A total of 12(52.2%) and 11(47.8%) employers reported to have been providing health and social supports respectively. Female employees (58.3%) from the private sector (60.0%) were more likely to receive supports than male employees (52.6%) and than those from the public sector (46.2%). The most common health and social support received by the employees were treatment, and nutritional support and reduction of workload, respectively. HIV/AIDS infected employees named treatment and nutritional support, and soft loans and reduced workload respectively, as the most important health and social supports they needed from their employers. This study provides baseline information for further studies on provision of health and social support services by employers to HIV/AIDS infected employees in the context of a developing economy like Tanzania.

A Novel Feature Extraction Method with Feature Selection to Identify Golgi-Resident Protein Types from Imbalanced Data

PubMed Central

Yang, Runtao; Zhang, Chengjin; Gao, Rui; Zhang, Lina

2016-01-01

The Golgi Apparatus (GA) is a major collection and dispatch station for numerous proteins destined for secretion, plasma membranes and lysosomes. The dysfunction of GA proteins can result in neurodegenerative diseases. Therefore, accurate identification of protein subGolgi localizations may assist in drug development and understanding the mechanisms of the GA involved in various cellular processes. In this paper, a new computational method is proposed for identifying cis-Golgi proteins from trans-Golgi proteins. Based on the concept of Common Spatial Patterns (CSP), a novel feature extraction technique is developed to extract evolutionary information from protein sequences. To deal with the imbalanced benchmark dataset, the Synthetic Minority Over-sampling Technique (SMOTE) is adopted. A feature selection method called Random Forest-Recursive Feature Elimination (RF-RFE) is employed to search the optimal features from the CSP based features and g-gap dipeptide composition. Based on the optimal features, a Random Forest (RF) module is used to distinguish cis-Golgi proteins from trans-Golgi proteins. Through the jackknife cross-validation, the proposed method achieves a promising performance with a sensitivity of 0.889, a specificity of 0.880, an accuracy of 0.885, and a Matthew’s Correlation Coefficient (MCC) of 0.765, which remarkably outperforms previous methods. Moreover, when tested on a common independent dataset, our method also achieves a significantly improved performance. These results highlight the promising performance of the proposed method to identify Golgi-resident protein types. Furthermore, the CSP based feature extraction method may provide guidelines for protein function predictions. PMID:26861308

Meshless Method for Simulation of Compressible Flow

NASA Astrophysics Data System (ADS)

Nabizadeh Shahrebabak, Ebrahim

In the present age, rapid development in computing technology and high speed supercomputers has made numerical analysis and computational simulation more practical than ever before for large and complex cases. Numerical simulations have also become an essential means for analyzing the engineering problems and the cases that experimental analysis is not practical. There are so many sophisticated and accurate numerical schemes, which do these simulations. The finite difference method (FDM) has been used to solve differential equation systems for decades. Additional numerical methods based on finite volume and finite element techniques are widely used in solving problems with complex geometry. All of these methods are mesh-based techniques. Mesh generation is an essential preprocessing part to discretize the computation domain for these conventional methods. However, when dealing with mesh-based complex geometries these conventional mesh-based techniques can become troublesome, difficult to implement, and prone to inaccuracies. In this study, a more robust, yet simple numerical approach is used to simulate problems in an easier manner for even complex problem. The meshless, or meshfree, method is one such development that is becoming the focus of much research in the recent years. The biggest advantage of meshfree methods is to circumvent mesh generation. Many algorithms have now been developed to help make this method more popular and understandable for everyone. These algorithms have been employed over a wide range of problems in computational analysis with various levels of success. Since there is no connectivity between the nodes in this method, the challenge was considerable. The most fundamental issue is lack of conservation, which can be a source of unpredictable errors in the solution process. This problem is particularly evident in the presence of steep gradient regions and discontinuities, such as shocks that frequently occur in high speed compressible flow problems. To solve this discontinuity problem, this research study deals with the implementation of a conservative meshless method and its applications in computational fluid dynamics (CFD). One of the most common types of collocating meshless method the RBF-DQ, is used to approximate the spatial derivatives. The issue with meshless methods when dealing with highly convective cases is that they cannot distinguish the influence of fluid flow from upstream or downstream and some methodology is needed to make the scheme stable. Therefore, an upwinding scheme similar to one used in the finite volume method is added to capture steep gradient or shocks. This scheme creates a flexible algorithm within which a wide range of numerical flux schemes, such as those commonly used in the finite volume method, can be employed. In addition, a blended RBF is used to decrease the dissipation ensuing from the use of a low shape parameter. All of these steps are formulated for the Euler equation and a series of test problems used to confirm convergence of the algorithm. The present scheme was first employed on several incompressible benchmarks to validate the framework. The application of this algorithm is illustrated by solving a set of incompressible Navier-Stokes problems. Results from the compressible problem are compared with the exact solution for the flow over a ramp and compared with solutions of finite volume discretization and the discontinuous Galerkin method, both requiring a mesh. The applicability of the algorithm and its robustness are shown to be applied to complex problems.

Societal Consequences of the g Factor in Employment.

ERIC Educational Resources Information Center

Gottfredson, Linda S.

1986-01-01

Reviews and rebuts seven common arguments that intelligence (g) is of little or no practical importance in employment. Illustrates in several ways the profound effect that differences in intelligence in a work force may have on the structure and functioning of whole societies. (Author/ABB)

How to locate & hire clinical/biomedical engineers, supervisors, managers & biomedical equipment technicians.

PubMed

Pacela, A F; Brush, L C

1993-01-01

This article has described the process and the resources available for locating and hiring clinical/biomedical engineers, supervisors, managers, and biomedical equipment technicians. First, the employer must determine the qualifications for the position, including job titles, descriptions, pay scales, and certification requirements. Next, the employer must find qualified applicants. The most common way to do this is to use "outside" contacts, such as help-wanted advertising, specialized job placement agencies, schools and colleges, military resources, regional biomedical societies, and nationwide societies. An "inside" search involves limited internal advertising of the position and using personal referrals for candidates. Finally, the employer must screen the applicants. The position description is the obvious first step in this process, but there are other pre-screening techniques, such as employment testing. Interviewing is the most common way to hire for job positions, but the interviewer needs to know about the position and ask the right questions. Post-interview screening is a final step to help determine the best job-person match.

Total costs of IBS: employer and managed care perspective.

PubMed

Cash, Brooks; Sullivan, Sean; Barghout, Victoria

2005-04-01

Irritable bowel syndrome (IBS) is a common gastrointestinal motility disorder that typically affects persons of working age and is costly to employers. The financial burden attributable to the direct (use of healthcare resources) and indirect (missed days from work [absenteeism] and loss of productivity while at work [presenteeism]) costs of IBS is similar to that of other common long-term medical disorders, such as asthma, migraine, hypertension, and congestive heart failure. The symptoms of IBS are significantly bothersome and place a substantial burden on the personal and working lives of patients. As with other long-term medical conditions that have a significant impact on productivity, directed efforts by employers can address IBS in the workplace and thereby potentially decrease its impact. In this article, the symptoms of IBS and its impact on patients and on society as a whole are discussed; options are outlined by which employers can help reduce the total costs of IBS, including lost productivity (both absenteeism and presenteeism), in the workplace.

The Employers' Perspective on Barriers and Facilitators to Employment of People with Intellectual Disability: A Differential Mixed-Method Approach

ERIC Educational Resources Information Center

Kocman, Andreas; Fischer, Linda; Weber, Germain

2018-01-01

Background: Obtaining employment is among the most important ambitions of people with intellectual disability. Progress towards comprehensive inclusive employment is hampered by numerous barriers. Limited research is available on these barriers and strategies to overcome them. Method: A mixed method approach in a sample of 30 HR-managers was used…

Walking and talking the tree of life: Why and how to teach about biodiversity

PubMed Central

Ballen, Cissy J.; Greene, Harry W.

2017-01-01

Taxonomic details of diversity are an essential scaffolding for biology education, yet outdated methods for teaching the tree of life (TOL), as implied by textbook content and usage, are still commonly employed. Here, we show that the traditional approach only vaguely represents evolutionary relationships, fails to denote major events in the history of life, and relies heavily on memorizing near-meaningless taxonomic ranks. Conversely, a clade-based strategy—focused on common ancestry, monophyletic groups, and derived functional traits—is explicitly based on Darwin’s “descent with modification,” provides students with a rational system for organizing the details of biodiversity, and readily lends itself to active learning techniques. We advocate for a phylogenetic classification that mirrors the TOL, a pedagogical format of increasingly complex but always hierarchical presentations, and the adoption of active learning technologies and tactics. PMID:28319149

Bruise chromophore concentrations over time

NASA Astrophysics Data System (ADS)

Duckworth, Mark G.; Caspall, Jayme J.; Mappus, Rudolph L., IV; Kong, Linghua; Yi, Dingrong; Sprigle, Stephen H.

2008-03-01

During investigations of potential child and elder abuse, clinicians and forensic practitioners are often asked to offer opinions about the age of a bruise. A commonality between existing methods of bruise aging is analysis of bruise color or estimation of chromophore concentration. Relative chromophore concentration is an underlying factor that determines bruise color. We investigate a method of chromophore concentration estimation that can be employed in a handheld imaging spectrometer with a small number of wavelengths. The method, based on absorbance properties defined by Beer-Lambert's law, allows estimation of differential chromophore concentration between bruised and normal skin. Absorption coefficient data for each chromophore are required to make the estimation. Two different sources of this data are used in the analysis- generated using Independent Component Analysis and taken from published values. Differential concentration values over time, generated using both sources, show correlation to published models of bruise color change over time and total chromophore concentration over time.

A generalized method for determining radiation patterns of aperture antennas and its application to reflector antennas. M.S. Thesis

NASA Technical Reports Server (NTRS)

Paknys, J. R.

1982-01-01

The reflector antenna may be thought of as an aperture antenna. The classical solution for the radiation pattern of such an antenna is found by the aperture integration (AI) method. Success with this method depends on how accurately the aperture currents are known beforehand. In the past, geometrical optics (GO) has been employed to find the aperture currents. This approximation is suitable for calculating the main beam and possibly the first few sidelobes. A better approximation is to use aperture currents calculated from the geometrical theory of diffraction (GTD). Integration of the GTD currents over and extended aperture yields more accurate results for the radiation pattern. This approach is useful when conventional AI and GTD solutions have no common region of validity. This problem arises in reflector antennas. Two dimensional models of parabolic reflectors are studied; however, the techniques discussed can be applied to any aperture antenna.

Mitigation of stress: new treatment alternatives.

PubMed

Subhani, Ahmad Rauf; Kamel, Nidal; Mohamad Saad, Mohamad Naufal; Nandagopal, Nanda; Kang, Kenneth; Malik, Aamir Saeed

2018-02-01

Complaints of stress are common in modern life. Psychological stress is a major cause of lifestyle-related issues, contributing to poor quality of life. Chronic stress impedes brain function, causing impairment of many executive functions, including working memory, decision making and attentional control. The current study sought to describe newly developed stress mitigation techniques, and their influence on autonomic and endocrine functions. The literature search revealed that the most frequently studied technique for stress mitigation was biofeedback (BFB). However, evidence suggests that neurofeedback (NFB) and noninvasive brain stimulation (NIBS) could potentially provide appropriate approaches. We found that recent studies of BFB methods have typically used measures of heart rate variability, respiration and skin conductance. In contrast, studies of NFB methods have typically utilized neurocomputation techniques employing electroencephalography, functional magnetic resonance imaging and near infrared spectroscopy. NIBS studies have typically utilized transcranial direct current stimulation methods. Mitigation of stress is a challenging but important research target for improving quality of life.

A Comparison of Observed Abundances in Five Well-Studied Planetary Nebulae

NASA Astrophysics Data System (ADS)

Tanner, Jolene; Balick, B.; Kwitter, K. B.

2013-01-01

We have assembled data and derived abundances in several recent careful studies for five bright planetary nebulae (PNe) of low, moderate, and high ionization and relatively simple morphology. Each of the studies employ different apertures, aperture placement, and facilities for the observations. Various methods were used to derive total abundances. All used spectral windows that included [OII]3727 in the UV through Argon lines in the red. Our ultimate goal is to determine the extent to which the derived abundances are consistent. We show that the reddening-corrected line ratios are surprisingly similar despite the different modes of observation and that the various abundance analysis methods yield generally consistent results for He/H, N/H, O/H, and Ne/H (within 50% with a few larger deviations). In addition we processed the line ratios from the different sources using a common abundance derivation method (ELSA) to search for clues of systematic methodological inconsistencies. None were uncovered.

Electrochemical Analysis of Neurotransmitters

NASA Astrophysics Data System (ADS)

Bucher, Elizabeth S.; Wightman, R. Mark

2015-07-01

Chemical signaling through the release of neurotransmitters into the extracellular space is the primary means of communication between neurons. More than four decades ago, Ralph Adams and his colleagues realized the utility of electrochemical methods for the study of easily oxidizable neurotransmitters, such as dopamine, norepinephrine, and serotonin and their metabolites. Today, electrochemical techniques are frequently coupled to microelectrodes to enable spatially resolved recordings of rapid neurotransmitter dynamics in a variety of biological preparations spanning from single cells to the intact brain of behaving animals. In this review, we provide a basic overview of the principles underlying constant-potential amperometry and fast-scan cyclic voltammetry, the most commonly employed electrochemical techniques, and the general application of these methods to the study of neurotransmission. We thereafter discuss several recent developments in sensor design and experimental methodology that are challenging the current limitations defining the application of electrochemical methods to neurotransmitter measurements.

Recovering DC coefficients in block-based DCT.

PubMed

Uehara, Takeyuki; Safavi-Naini, Reihaneh; Ogunbona, Philip

2006-11-01

It is a common approach for JPEG and MPEG encryption systems to provide higher protection for dc coefficients and less protection for ac coefficients. Some authors have employed a cryptographic encryption algorithm for the dc coefficients and left the ac coefficients to techniques based on random permutation lists which are known to be weak against known-plaintext and chosen-ciphertext attacks. In this paper we show that in block-based DCT, it is possible to recover dc coefficients from ac coefficients with reasonable image quality and show the insecurity of image encryption methods which rely on the encryption of dc values using a cryptoalgorithm. The method proposed in this paper combines dc recovery from ac coefficients and the fact that ac coefficients can be recovered using a chosen ciphertext attack. We demonstrate that a method proposed by Tang to encrypt and decrypt MPEG video can be completely broken.

Detection of anti-Yta antibodies using a sensitive and specific enzyme-linked immunosorbent assay.

PubMed

Geen, J; Hullin, D A; Hogg, S I

1999-01-01

A specific, sensitive and semi-quantitative enzyme-linked immunosorbent assay (ELISA) is described to detect anti-Yta antibodies in human serum. Recombinant acetylcholinesterase (AChE E.C.3.1.1.7) was employed as the coating antigen in the microtitre plate and horseradish peroxidase (HRP)-conjugated specific antibody (IgG) was used as the secondary antibody. The method developed showed excellent sensitivity, detecting a titre > 1 in 600,000 (3.5 ng/mL mouse IgG protein) for mouse monoclonal (mMAb) anti-AChE antibody. No cross-reaction was seen with other common blood group antibodies, confirming the specificity of the method. The recombinant antigen's AChE phenotype was confirmed as Yta, as no reaction was detected with anti-Ytb-positive sera. The ELISA method correlated closely with the established serological grading system used routinely in blood transfusion laboratories.

Oxidation-resisting technology of W-Re thermocouples and their industrial applications

NASA Astrophysics Data System (ADS)

Wang, K.; Dai, M.; Dong, J.; Wang, L.; Wang, T.

2013-09-01

We use DSC/TG, SEM and EPMA approaches to investigate the high temperature oxidation behaviors of the Type C W-Re thermocouple wires and W-Re powders which the wires were made from. To solve the oxidization of W-Re thermocouples the chemical method, other than the commonly used physical method, i.e. vacuum-pumping method, was developed. Several solid-packed techniques such as stuffing with inert material, chemical deoxidizing, gas-absorbing and sealing were employed to prevent the W-Re thermocouples from oxidizing. Based on comprehensive consideration of various parameters in process industries, a series of industrial W-Re thermocouples has been successfully used in oxidizing and reducing atmospheres, high temperature alkali and other harsh environments. The service life is 6 to 12 months in strong oxidizing atmosphere of Cr2O3-Al2O3 brick kiln and 2 to 3 months in high temperature alkali and in reducing atmosphere of CO.

Two-Phase and Graph-Based Clustering Methods for Accurate and Efficient Segmentation of Large Mass Spectrometry Images.

PubMed

Dexter, Alex; Race, Alan M; Steven, Rory T; Barnes, Jennifer R; Hulme, Heather; Goodwin, Richard J A; Styles, Iain B; Bunch, Josephine

2017-11-07

Clustering is widely used in MSI to segment anatomical features and differentiate tissue types, but existing approaches are both CPU and memory-intensive, limiting their application to small, single data sets. We propose a new approach that uses a graph-based algorithm with a two-phase sampling method that overcomes this limitation. We demonstrate the algorithm on a range of sample types and show that it can segment anatomical features that are not identified using commonly employed algorithms in MSI, and we validate our results on synthetic MSI data. We show that the algorithm is robust to fluctuations in data quality by successfully clustering data with a designed-in variance using data acquired with varying laser fluence. Finally, we show that this method is capable of generating accurate segmentations of large MSI data sets acquired on the newest generation of MSI instruments and evaluate these results by comparison with histopathology.

Enhancement of low visibility aerial images using histogram truncation and an explicit Retinex representation for balancing contrast and color consistency

NASA Astrophysics Data System (ADS)

Liu, Changjiang; Cheng, Irene; Zhang, Yi; Basu, Anup

2017-06-01

This paper presents an improved multi-scale Retinex (MSR) based enhancement for ariel images under low visibility. For traditional multi-scale Retinex, three scales are commonly employed, which limits its application scenarios. We extend our research to a general purpose enhanced method, and design an MSR with more than three scales. Based on the mathematical analysis and deductions, an explicit multi-scale representation is proposed that balances image contrast and color consistency. In addition, a histogram truncation technique is introduced as a post-processing strategy to remap the multi-scale Retinex output to the dynamic range of the display. Analysis of experimental results and comparisons with existing algorithms demonstrate the effectiveness and generality of the proposed method. Results on image quality assessment proves the accuracy of the proposed method with respect to both objective and subjective criteria.

Stabilisation of bank slopes that are prone to liquefaction in ecologically sensitive areas.

PubMed

Nestler, P; Stoll, R D

2001-01-01

A consequence of lignite stripping in the Lusatia mining district (East Germany) is the backfilling of dumps that mainly consist of low-compacted fine and medium-grained sands. When the ground-water table, which had been lowered while stripping the coal, is rising again, these dumps might be affected by a settlement flow due to the liquefaction of soils. Common methods for stabilisation as, for instance, blasting or vibrator-jetting deep compaction, are not very useful in ecologically sensitive areas, where dumps have been afforested and embankment areas of residual lakes have developed into highly valuable biotopes. A new so-called air-impulse method in combination with directional horizontal drilling has been developed, which does not have a considerably negative impact on the vegetation during compaction. The experience gained during the first employment of this method at the lake "Katja", a residual lake of lignite stripping, is presented in this paper.

Kathy Pan, sticks and pummelling: techniques used to induce abortion by Burmese women on the Thai border.

PubMed

Belton, Suzanne; Whittaker, Andrea

2007-10-01

Forced migrants face particular reproductive health problems. Migrant Burmese women in Thailand often need to work to support themselves and their families, and mistimed and unwanted pregnancies are a common problem. They have limited access to culturally appropriate reproductive health services and no access to safe elective abortion. They are at risk of deportation or at least harassment by Thai authorities if they travel. They use traditional methods such as herbal medicines, and employ lay midwives to provide pummelling and stick abortions to end their pregnancies. This ethnographic study used various methods to collect data over 10 months in Tak Province, Thailand. The authors describe the women's motives and means of ending their pregnancies and some of the difficulties in obtaining reliable modern methods of contraception. This study highlights the need for reproductive health care for displaced populations.

Intracardiac Shunting and Stroke in Children: A Systematic Review

PubMed Central

Dowling, Michael M.; Ikemba, Catherine M.

2017-01-01

In adults, patent foramen ovale or other potential intracardiac shunts are established risk factors for stroke via paradoxical embolization. Stroke is less common in children and risk factors differ. The authors examined the literature on intracardiac shunting and stroke in children, identifying the methods employed, the prevalence of detectible intracardiac shunts, associated conditions, and treatments. PubMed searches with keywords related to intracardiac shunting and stroke in children identified articles of interest. Additional articles were identified via citations in these articles or in reviews. The authors found that studies of intracardiac shunting in children with stroke are limited. No controlled studies were identified. Detection methods vary and the prevalence of echocardiographically detectible intracardiac shunting appears lower than reported in adults and autopsy studies. Defining the role of intracardiac shunting in pediatric stroke will require controlled studies with unified detection methods in populations stratified by additional risk factors for paradoxical embolization. Optimal treatment is unclear. PMID:21212453

Electrochemical Analysis of Neurotransmitters

PubMed Central

Bucher, Elizabeth S.; Wightman, R. Mark

2016-01-01

Chemical signaling through the release of neurotransmitters into the extracellular space is the primary means of communication between neurons. More than four decades ago, Ralph Adams and his colleagues realized the utility of electrochemical methods for the study of easily oxidizable neurotransmitters, such as dopamine, norepinephrine, and serotonin and their metabolites. Today, electrochemical techniques are frequently coupled to microelectrodes to enable spatially resolved recordings of rapid neurotransmitter dynamics in a variety of biological preparations spanning from single cells to the intact brain of behaving animals. In this review, we provide a basic overview of the principles underlying constant-potential amperometry and fast-scan cyclic voltammetry, the most commonly employed electrochemical techniques, and the general application of these methods to the study of neurotransmission. We thereafter discuss several recent developments in sensor design and experimental methodology that are challenging the current limitations defining the application of electrochemical methods to neurotransmitter measurements. PMID:25939038

Towards sustainable and safe apparel cleaning methods: A review.

PubMed

Troynikov, Olga; Watson, Christopher; Jadhav, Amit; Nawaz, Nazia; Kettlewell, Roy

2016-11-01

Perchloroethylene (PERC) is a compound commonly used as a solvent in dry cleaning, despite its severe health and environmental impacts. In recent times chemicals such as hydrocarbons, GreenEarth(®), acetal and liquid carbon dioxide have emerged as less damaging substitutes for PERC, and an even more sustainable water-based wet cleaning process has been developed. We employed a systematic review approach to provide a comprehensive overview of the existing research evidence in the area of sustainable and safe apparel cleaning methods and care. Our review describes traditional professional dry cleaning methods, as well as those that utilise solvents other than PERC, and their ecological attributes. In addition, the new professional wet cleaning process is discussed. Finally, we address the health hazards of the various solvents used in dry cleaning and state-of-the-art solvent residue trace analysis techniques. Copyright © 2016 Elsevier Ltd. All rights reserved.

Wide field of view common-path lateral-shearing digital holographic interference microscope

NASA Astrophysics Data System (ADS)

Vora, Priyanka; Trivedi, Vismay; Mahajan, Swapnil; Patel, Nimit; Joglekar, Mugdha; Chhaniwal, Vani; Moradi, Ali-Reza; Javidi, Bahram; Anand, Arun

2017-12-01

Quantitative three-dimensional (3-D) imaging of living cells provides important information about the cell morphology and its time variation. Off-axis, digital holographic interference microscopy is an ideal tool for 3-D imaging, parameter extraction, and classification of living cells. Two-beam digital holographic microscopes, which are usually employed, provide high-quality 3-D images of micro-objects, albeit with lower temporal stability. Common-path digital holographic geometries, in which the reference beam is derived from the object beam, provide higher temporal stability along with high-quality 3-D images. Self-referencing geometry is the simplest of the common-path techniques, in which a portion of the object beam itself acts as the reference, leading to compact setups using fewer optical elements. However, it has reduced field of view, and the reference may contain object information. Here, we describe the development of a common-path digital holographic microscope, employing a shearing plate and converting one of the beams into a separate reference by employing a pin-hole. The setup is as compact as self-referencing geometry, while providing field of view as wide as that of a two-beam microscope. The microscope is tested by imaging and quantifying the morphology and dynamics of human erythrocytes.

Wide field of view common-path lateral-shearing digital holographic interference microscope.

PubMed

Vora, Priyanka; Trivedi, Vismay; Mahajan, Swapnil; Patel, Nimit; Joglekar, Mugdha; Chhaniwal, Vani; Moradi, Ali-Reza; Javidi, Bahram; Anand, Arun

2017-12-01

Quantitative three-dimensional (3-D) imaging of living cells provides important information about the cell morphology and its time variation. Off-axis, digital holographic interference microscopy is an ideal tool for 3-D imaging, parameter extraction, and classification of living cells. Two-beam digital holographic microscopes, which are usually employed, provide high-quality 3-D images of micro-objects, albeit with lower temporal stability. Common-path digital holographic geometries, in which the reference beam is derived from the object beam, provide higher temporal stability along with high-quality 3-D images. Self-referencing geometry is the simplest of the common-path techniques, in which a portion of the object beam itself acts as the reference, leading to compact setups using fewer optical elements. However, it has reduced field of view, and the reference may contain object information. Here, we describe the development of a common-path digital holographic microscope, employing a shearing plate and converting one of the beams into a separate reference by employing a pin-hole. The setup is as compact as self-referencing geometry, while providing field of view as wide as that of a two-beam microscope. The microscope is tested by imaging and quantifying the morphology and dynamics of human erythrocytes. (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

Elemental analysis of forensic glasses by inductively coupled plasma mass spectrometry

NASA Astrophysics Data System (ADS)

Almirall, Jose R.; Duckworth, Douglas C.; Bayne, Charles K.; Morton, Sherman A.; Smith, David H.; Koons, Robert D.; Furton, Kenneth G.

1999-02-01

Flat glass is a common type of evidence collected from the scenes of crimes such as burglaries, vandalism, and hit-and- run accidents. The usefulness of such evidence lies in the ability to associate the glass from the scene (or a suspect) to the original source. Physical and chemical analysis of the glass can be used for discrimination between the possible sources of glass. If the sample is large enough, physical attributes such as fracture matches, density, color, and thickness can be employed for comparison between a recovered fragment(s) to the suspect source. More commonly, refractive index (RI) comparisons are employed. Due to the improved control over glass manufacturing processes, RI values often cannot differentiate glasses where approximately 6 - 9% of casework samples are not expected to be distinguished by RI alone even if they originated from different sources. Employing methods such as NAA, XRF, ICP-AES, and ICP-MS for the comparison of trace elemental compositions has been shown to be more discriminating than RI comparisons. The multielement capability and the sensitivity of ICP-AES and ICP-MS provide for excellent discrimination power. In this work, the sources of variability in ICP-MS of glass analysis are investigated to determine possible sources of variation. The sources of variation examined include errors due to sample preparation, instrument accuracy and precision, and interlaboratory reproducibility. Other sources of variation include inhomogeneity across a sheet of glass from the same source. Analysis of variance has been applied to our ICP-MS analysis of NIST standards and to the interlaboratory comparisons of float glass samples collected across a sheet in a production facility. The results of these experiments allows for a more accurate interpretation of forensic glass data and a better understanding of the discriminating power (absolute and practical) of ICP-MS.

Technology-Based Interventions for Mental Health in Tertiary Students: Systematic Review

PubMed Central

Gulliver, Amelia; Chan, Jade KY; Batterham, Philip J; Reynolds, Julia; Calear, Alison; Tait, Robert; Bennett, Kylie; Griffiths, Kathleen M

2013-01-01

Background Mental disorders are responsible for a high level of disability burden in students attending university. However, many universities have limited resources available to support student mental health. Technology-based interventions may be highly relevant to university populations. Previous reviews have targeted substance use and eating disorders in tertiary students. However, the effectiveness of technology-based interventions for other mental disorders and related issues has not been reviewed. Objective To systematically review published randomized trials of technology-based interventions evaluated in a university setting for disorders other than substance use and eating disorders. Methods The PubMed, PsycInfo, and Cochrane Central Register of Controlled Trials databases were searched using keywords, phrases, and MeSH terms. Retrieved abstracts (n=1618) were double screened and coded. Included studies met the following criteria: (1) the study was a randomized trial or a randomized controlled trial, (2) the sample was composed of students attending a tertiary institution, (3) the intervention was delivered by or accessed using a technological device or process, (4) the age range of the sample was between 18 and 25 years, and (5) the intervention was designed to improve, reduce, or change symptoms relating to a mental disorder. Results A total of 27 studies met inclusion criteria for the present review. Most of the studies (24/27, 89%) employed interventions targeting anxiety symptoms or disorders or stress, although almost one-third (7/24, 29%) targeted both depression and anxiety. There were a total of 51 technology-based interventions employed across the 27 studies. Overall, approximately half (24/51, 47%) were associated with at least 1 significant positive outcome compared with the control at postintervention. However, 29% (15/51) failed to find a significant effect. Effect sizes were calculated for the 18 of 51 interventions that provided sufficient data. Median effect size was 0.54 (range –0.07 to 3.04) for 8 interventions targeting depression and anxiety symptoms and 0.84 (range –0.07 to 2.66) for 10 interventions targeting anxiety symptoms and disorders. Internet-based technology (typically involving cognitive behavioral therapy) was the most commonly employed medium, being employed in 16 of 27 studies and approximately half of the 51 technology-based interventions (25/51, 49%). Distal and universal preventive interventions were the most common type of intervention. Some methodological problems were evident in the studies, with randomization methods either inadequate or inadequately described, few studies specifying a primary outcome, and most of the studies failing to undertake or report appropriate intent-to-treat analyses. Conclusions The findings of this review indicate that although technological interventions targeting certain mental health and related problems offer promise for students in university settings, more high quality trials that fully report randomization methods, outcome data, and data analysis methods are needed. PMID:23711740

Choosing and Using Introns in Molecular Phylogenetics

PubMed Central

Creer, Simon

2007-01-01

Introns are now commonly used in molecular phylogenetics in an attempt to recover gene trees that are concordant with species trees, but there are a range of genomic, logistical and analytical considerations that are infrequently discussed in empirical studies that utilize intron data. This review outlines expedient approaches for locus selection, overcoming paralogy problems, recombination detection methods and the identification and incorporation of LVHs in molecular systematics. A range of parsimony and Bayesian analytical approaches are also described in order to highlight the methods that can currently be employed to align sequences and treat indels in subsequent analyses. By covering the main points associated with the generation and analysis of intron data, this review aims to provide a comprehensive introduction to using introns (or any non-coding nuclear data partition) in contemporary phylogenetics. PMID:19461984

Electrochemical Nanoparticle-Enzyme Sensors for Screening Bacterial Contamination in Drinking Water

PubMed Central

Chen, Juhong; Jiang, Ziwen; Ackerman, Jonathan D.; Yazdani, Mahdieh; Hou, Singyuk

2015-01-01

Traditional plating and culturing methods used to quantify bacteria commonly require hours to days from sampling to results. We present here a simple, sensitive and rapid electrochemical method for bacteria detection in drinking water based on gold nanoparticle-enzyme complexes. The gold nanoparticles were functionalized with positively charged quaternary amine headgroups that could bind to enzymes through electrostatic interactions, resulting in inhibition of enzymatic activity. In the presence of bacteria, the nanoparticles released from the enzymes and preferentially bound to the bacteria, resulting in an increase in enzyme activity, releasing a redox-active phenol from the substrate. We employed this strategy for the electrochemical sensing of Escherichia coli and Staphylococcus aureus, resulting in a rapid detection (<1h) with high sensitivity (102 CFU·mL−1). PMID:26042607

A 360-degree floating 3D display based on light field regeneration.

PubMed

Xia, Xinxing; Liu, Xu; Li, Haifeng; Zheng, Zhenrong; Wang, Han; Peng, Yifan; Shen, Weidong

2013-05-06

Using light field reconstruction technique, we can display a floating 3D scene in the air, which is 360-degree surrounding viewable with correct occlusion effect. A high-frame-rate color projector and flat light field scanning screen are used in the system to create the light field of real 3D scene in the air above the spinning screen. The principle and display performance of this approach are investigated in this paper. The image synthesis method for all the surrounding viewpoints is analyzed, and the 3D spatial resolution and angular resolution of the common display zone are employed to evaluate display performance. The prototype is achieved and the real 3D color animation image has been presented vividly. The experimental results verified the representability of this method.

Prospects for Irradiation in Cellulosic Ethanol Production

PubMed Central

Saini, Anita; Aggarwal, Neeraj K.; Sharma, Anuja; Yadav, Anita

2015-01-01

Second generation bioethanol production technology relies on lignocellulosic biomass composed of hemicelluloses, celluloses, and lignin components. Cellulose and hemicellulose are sources of fermentable sugars. But the structural characteristics of lignocelluloses pose hindrance to the conversion of these sugar polysaccharides into ethanol. The process of ethanol production, therefore, involves an expensive and energy intensive step of pretreatment, which reduces the recalcitrance of lignocellulose and makes feedstock more susceptible to saccharification. Various physical, chemical, biological, or combined methods are employed to pretreat lignocelluloses. Irradiation is one of the common and promising physical methods of pretreatment, which involves ultrasonic waves, microwaves, γ-rays, and electron beam. Irradiation is also known to enhance the effect of saccharification. This review explains the role of different radiations in the production of cellulosic ethanol. PMID:26839707

Admittance Control for Robot Assisted Retinal Vein Micro-Cannulation under Human-Robot Collaborative Mode.

PubMed

Zhang, He; Gonenc, Berk; Iordachita, Iulian

2017-10-01

Retinal vein occlusion is one of the most common retinovascular diseases. Retinal vein cannulation is a potentially effective treatment method for this condition that currently lies, however, at the limits of human capabilities. In this work, the aim is to use robotic systems and advanced instrumentation to alleviate these challenges, and assist the procedure via a human-robot collaborative mode based on our earlier work on the Steady-Hand Eye Robot and force-sensing instruments. An admittance control method is employed to stabilize the cannula relative to the vein and maintain it inside the lumen during the injection process. A pre-stress strategy is used to prevent the tip of microneedle from getting out of vein in in prolonged infusions, and the performance is verified through simulations.

Facial reconstruction--anatomical art or artistic anatomy?

PubMed

Wilkinson, Caroline

2010-02-01

Facial reconstruction is employed in the context of forensic investigation and for creating three-dimensional portraits of people from the past, from ancient Egyptian mummies and bog bodies to digital animations of J. S. Bach. This paper considers a facial reconstruction method (commonly known as the Manchester method) associated with the depiction and identification of the deceased from skeletal remains. Issues of artistic licence and scientific rigour, in relation to soft tissue reconstruction, anatomical variation and skeletal assessment, are discussed. The need for artistic interpretation is greatest where only skeletal material is available, particularly for the morphology of the ears and mouth, and with the skin for an ageing adult. The greatest accuracy is possible when information is available from preserved soft tissue, from a portrait, or from a pathological condition or healed injury.

Empirical methods for assessing meaningful neuropsychological change following epilepsy surgery.

PubMed

Sawrie, S M; Chelune, G J; Naugle, R I; Lüders, H O

1996-11-01

Traditional methods for assessing the neurocognitive effects of epilepsy surgery are confounded by practice effects, test-retest reliability issues, and regression to the mean. This study employs 2 methods for assessing individual change that allow direct comparison of changes across both individuals and test measures. Fifty-one medically intractable epilepsy patients completed a comprehensive neuropsychological battery twice, approximately 8 months apart, prior to any invasive monitoring or surgical intervention. First, a Reliable Change (RC) index score was computed for each test score to take into account the reliability of that measure, and a cutoff score was empirically derived to establish the limits of statistically reliable change. These indices were subsequently adjusted for expected practice effects. The second approach used a regression technique to establish "change norms" along a common metric that models both expected practice effects and regression to the mean. The RC index scores provide the clinician with a statistical means of determining whether a patient's retest performance is "significantly" changed from baseline. The regression norms for change allow the clinician to evaluate the magnitude of a given patient's change on 1 or more variables along a common metric that takes into account the reliability and stability of each test measure. Case data illustrate how these methods provide an empirically grounded means for evaluating neurocognitive outcomes following medical interventions such as epilepsy surgery.

Hyperspectral laser-induced autofluorescence imaging of dental caries

NASA Astrophysics Data System (ADS)

Bürmen, Miran; Fidler, Aleš; Pernuš, Franjo; Likar, Boštjan

2012-01-01

Dental caries is a disease characterized by demineralization of enamel crystals leading to the penetration of bacteria into the dentine and pulp. Early detection of enamel demineralization resulting in increased enamel porosity, commonly known as white spots, is a difficult diagnostic task. Laser induced autofluorescence was shown to be a useful method for early detection of demineralization. The existing studies involved either a single point spectroscopic measurements or imaging at a single spectral band. In the case of spectroscopic measurements, very little or no spatial information is acquired and the measured autofluorescence signal strongly depends on the position and orientation of the probe. On the other hand, single-band spectral imaging can be substantially affected by local spectral artefacts. Such effects can significantly interfere with automated methods for detection of early caries lesions. In contrast, hyperspectral imaging effectively combines the spatial information of imaging methods with the spectral information of spectroscopic methods providing excellent basis for development of robust and reliable algorithms for automated classification and analysis of hard dental tissues. In this paper, we employ 405 nm laser excitation of natural caries lesions. The fluorescence signal is acquired by a state-of-the-art hyperspectral imaging system consisting of a high-resolution acousto-optic tunable filter (AOTF) and a highly sensitive Scientific CMOS camera in the spectral range from 550 nm to 800 nm. The results are compared to the contrast obtained by near-infrared hyperspectral imaging technique employed in the existing studies on early detection of dental caries.

The impact of failing to identify suspect effort in patients undergoing adult attention-deficit/hyperactivity disorder (ADHD) assessment.

PubMed

Marshall, Paul S; Hoelzle, James B; Heyerdahl, Danielle; Nelson, Nathaniel W

2016-10-01

[Correction Notice: An Erratum for this article was reported in Vol 28(10) of Psychological Assessment (see record 2016-22725-001). In the article, the penultimate sentence of the abstract should read “These results suggest that a significant percentage of those making a suspect effort will be diagnosed with ADHD using the most commonly employed assessment methods: an interview alone (71%); an interview and ADHD behavior rating scales combined (65%); and an interview, behavior rating scales, and most continuous performance tests combined (62%).” All versions of this article have been corrected.] This retrospective study examines how many adult patients would plausibly receive a diagnosis of attention-deficit/hyperactivity disorder (ADHD) if performance and symptom validity measures were not administered during neuropsychological evaluations. Five hundred fifty-four patients were extracted from an archival clinical dataset. A total of 102 were diagnosed with ADHD based on cognitive testing, behavior rating scales, effort testing, and clinical interview; 115 were identified as putting forth suspect effort in accordance with the Slick, Sherman, and Iverson (1999) criteria. From a clinical decision-making perspective, suspect effort and ADHD groups were nearly indistinguishable on ADHD behavior, executive function, and functional impairment rating scales, as well as on cognitive testing and key clinical interview questions. These results suggest that a significant percentage of those making a suspect effort will be diagnosed with ADHD using the most commonly employed assessment methods: an interview alone (71%); an interview and ADHD behavior rating scales combined (65%); and an interview, behavior rating scales, and most continuous performance tests combined (62%) [corrected]. This research makes clear that it is essential to evaluate task engagement and possible symptom amplification during clinical evaluations. PsycINFO Database Record (c) 2016 APA, all rights reserved

Analytical and finite element performance evaluation of embedded piezoelectric sensors in polyethylene

NASA Astrophysics Data System (ADS)

Safaei, Mohsen; Anton, Steven R.

2017-04-01

A common application of piezoelectric transducers is to obtain operational data from working structures and dynamic components. Collected data can then be used to evaluate dynamic characterization of the system, perform structural health monitoring, or implement various other assessments. In some applications, piezoelectric transducers are bonded inside the host structure to satisfy system requirements; for example, piezoelectric transducers can be embedded inside the biopolymers of total joint replacements to evaluate the functionality of the artificial joint. The interactions between the piezoelectric device (inhomogeneity) and the surrounding polymer matrix determine the mechanical behavior of the matrix and the electromechanical behavior of the sensor. In this work, an analytical approach is employed to evaluate the electromechanical performance of 2-D plane strain piezoelectric elements of both circular and rectangular-shape inhomogeneities. These piezoelectric elements are embedded inside medical grade ultra-high molecular weight (UHMW) polyethylene, a material commonly used for bearing surfaces of joint replacements, such as total knee replacements (TKRs). Using the famous Eshelby inhomogeneity solution, the stress and electric field inside the circular (elliptical) inhomogeneity is obtained by decoupling the solution into purely elastic and dielectric systems of equations. For rectangular (non-elliptical) inhomogeneities, an approximation method based on the boundary integral function is utilized and the same decoupling method is employed. In order to validate the analytical result, a finite element analysis is performed for both the circular and rectangular inhomogeneities and the error for each case is calculated. For elliptical geometry, the error is less than 1% for stress and electric fields inside and outside the piezoelectric inhomogeneity, whereas, the error for non-elliptical geometry is obtained as 11% and 7% for stress and electric field inside the inhomogeneity, respectively.

Establishment of a 10-Plex Quantitative Fluorescent-PCR Assay for Rapid Diagnosis of Sex Chromosome Aneuploidies

PubMed Central

Xie, Xingmei; Liang, Qiaoyi

2014-01-01

Sex chromosome aneuploidies occur commonly in the general population, with an incidence of 1 in 400 newborns. However, no tests specifically targeting sex chromosomes have been carried out in prenatal diagnosis or newborn screening, resulting in late recognition of these diseases. In this study, a rapid diagnostic method for sex chromosome aneuploidies was established using Quantitative Fluorescent-PCR (QF-PCR). Ten markers were included in one multiplex QF-PCR assay, including two sex determination genes (AMXY and SRY), five X-linked short tandem repeats (STRs; DXS1053, DXS981, DXS6809, DXS1187, and DXS8377), one X/Y-common STR (X22), and two autosomal STRs (D13S305 and D21S11). Retrospective tests of 70 cases with known cytogenetic results indicated that the 10-plex QF-PCR assay could well determine sex chromosome copy numbers by both allelic peak numbers and a sex chromosome dosage calculation with the autosomal STRs as internal controls. Prospective comparison with cytogenetic karyotyping on 534 cases confirmed that the 10-plex QF-PCR assay could be well employed for sex chromosome aneuploidy diagnosis in at least the Chinese Han population. This is the first QF-PCR test for the diagnosis of sex chromosome aneuploidies in the Chinese population. This test is superior to previous designs by including up to 8 sex-linked markers covering different parts of sex chromosomes as well as employing internal controls for copy number dosage calculation in a single PCR reaction. Due to simple technique and data analysis, as well as easy implementation within routine clinical services, this method is of great clinical application value and could be widely applied. PMID:25207978

Sexual Behavior and Condom Use among Seasonal Dalit Migrant Laborers to India from Far West, Nepal: A Qualitative Study

PubMed Central

Bam, Kiran; Thapa, Rajshree; Newman, Marielle Sophia; Bhatt, Lokesh Prasad; Bhatta, Shree Krishna

2013-01-01

Background Around 41% of Human Immunodeficiency Virus (HIV) cases in Nepal occur in seasonal migrant laborers. Dalit migrant laborers represent the largest proportion of reported HIV cases in the Far Western Region (Sudur Pashchimanchal, or Far West), Nepal. The study’s objectives were to assess sexual behavior, condom use status and HIV risk perception among Dalit migrant laborers to India from Far West Region, Nepal. Methods The study was conducted among Dalit male migrant laborers aged 15 years and above who had migrated for at least six months of the last two years to India. For the sampling the village development committees (VDCs) from Achham, Doti and Kanchanpur districts of Nepal were purposively selected. The data were collected in March and April 2011 via ten in-depth interviews and four focus group discussions and analyzed using content analysis. Results Poor socio-economic status, caste-related discrimination, and lack of employment opportunities push large groups of young Dalits to migrate to India for employment, where they engage in sex with female sex workers (FSWs). The participants described unmarried status, peer influence, alcohol use, low-priced sex with FSWs and unwillingness to use condoms as common factors of their migration experience. Lack of awareness on HIV/AIDS was common among study participants. Awareness of HIV/AIDS and faithful, monogamous partnerships are reported as factors influencing safer sexual behavior. Conclusions Dalits are an especially vulnerable population among migrant laborers and may be over-represented in new HIV infections in Nepal. Comprehensive surveying and health promotion programs targeted to this population are urgently needed and potent methods of stopping HIV spread. PMID:24040359

A typology of educationally focused medical simulation tools.

PubMed

Alinier, Guillaume

2007-10-01

The concept of simulation as an educational tool in healthcare is not a new idea but its use has really blossomed over the last few years. This enthusiasm is partly driven by an attempt to increase patient safety and also because the technology is becoming more affordable and advanced. Simulation is becoming more commonly used for initial training purposes as well as for continuing professional development, but people often have very different perceptions of the definition of the term simulation, especially in an educational context. This highlights the need for a clear classification of the technology available but also about the method and teaching approach employed. The aims of this paper are to discuss the current range of simulation approaches and propose a clear typology of simulation teaching aids. Commonly used simulation techniques have been identified and discussed in order to create a classification that reports simulation techniques, their usual mode of delivery, the skills they can address, the facilities required, their typical use, and their pros and cons. This paper presents a clear classification scheme of educational simulation tools and techniques with six different technological levels. They are respectively: written simulations, three-dimensional models, screen-based simulators, standardized patients, intermediate fidelity patient simulators, and interactive patient simulators. This typology allows the accurate description of the simulation technology and the teaching methods applied. Thus valid comparison of educational tools can be made as to their potential effectiveness and verisimilitude at different training stages. The proposed typology of simulation methodologies available for educational purposes provides a helpful guide for educators and participants which should help them to realise the potential learning outcomes at different technological simulation levels in relation to the training approach employed. It should also be a useful resource for simulation users who are trying to improve their educational practice.

Fusion of Location Fingerprinting and Trilateration Based on the Example of Differential Wi-Fi Positioning

NASA Astrophysics Data System (ADS)

Retscher, G.

2017-09-01

Positioning of mobile users in indoor environments with Wireless Fidelity (Wi-Fi) has become very popular whereby location fingerprinting and trilateration are the most commonly employed methods. In both the received signal strength (RSS) of the surrounding access points (APs) are scanned and used to estimate the user's position. Within the scope of this study the advantageous qualities of both methods are identified and selected to benefit their combination. By a fusion of these technologies a higher performance for Wi-Fi positioning is achievable. For that purpose, a novel approach based on the well-known Differential GPS (DGPS) principle of operation is developed and applied. This approach for user localization and tracking is termed Differential Wi-Fi (DWi-Fi) by analogy with DGPS. From reference stations deployed in the area of interest differential measurement corrections are derived and applied at the mobile user side. Hence, range or coordinate corrections can be estimated from a network of reference station observations as it is done in common CORS GNSS networks. A low-cost realization with Raspberry Pi units is employed for these reference stations. These units serve at the same time as APs broadcasting Wi-Fi signals as well as reference stations scanning the receivable Wi-Fi signals of the surrounding APs. As the RSS measurements are carried out continuously at the reference stations dynamically changing maps of RSS distributions, so-called radio maps, are derived. Similar as in location fingerprinting this radio maps represent the RSS fingerprints at certain locations. From the areal modelling of the correction parameters in combination with the dynamically updated radio maps the location of the user can be estimated in real-time. The novel approach is presented and its performance demonstrated in this paper.

77 FR 55229 - National Farmworker Jobs Program (NFJP) Information Collection Forms; Comment Request for Regular...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-07

... DEPARTMENT OF LABOR Employment and Training Administration National Farmworker Jobs Program (NFJP... Comment Request for Regular Extension of approval (with revisions) for the National Farmworker Jobs... ETA to calculate the common performance measures for entered employment, retention, and earnings. The...

Student Employment as a Model for Experiential Learning

ERIC Educational Resources Information Center

Fede, Jacquelyn H.; Gorman, Kathleen S.; Cimini, Maria E.

2018-01-01

Background: Evidence suggests experiential learning promotes the development of a range of transferrable skills including communication, responsibility, and social skills. However, many students are unable to participate in internships or other common forms of experiential education because they need to work for pay. University employment has been…

75 FR 70949 - Proposed Information Collection for the Evaluation of the Aging Worker Initiative; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-19

... OMB-approved quarterly and Common Measures reporting requirements for High Growth Job Training Grants... DEPARTMENT OF LABOR Employment and Training Administration Proposed Information Collection for the Evaluation of the Aging Worker Initiative; Comment Request AGENCY: Employment and Training Administration...

Technology-based interventions for mental health in tertiary students: systematic review.

PubMed

Farrer, Louise; Gulliver, Amelia; Chan, Jade K Y; Batterham, Philip J; Reynolds, Julia; Calear, Alison; Tait, Robert; Bennett, Kylie; Griffiths, Kathleen M

2013-05-27

Mental disorders are responsible for a high level of disability burden in students attending university. However, many universities have limited resources available to support student mental health. Technology-based interventions may be highly relevant to university populations. Previous reviews have targeted substance use and eating disorders in tertiary students. However, the effectiveness of technology-based interventions for other mental disorders and related issues has not been reviewed. To systematically review published randomized trials of technology-based interventions evaluated in a university setting for disorders other than substance use and eating disorders. The PubMed, PsycInfo, and Cochrane Central Register of Controlled Trials databases were searched using keywords, phrases, and MeSH terms. Retrieved abstracts (n=1618) were double screened and coded. Included studies met the following criteria: (1) the study was a randomized trial or a randomized controlled trial, (2) the sample was composed of students attending a tertiary institution, (3) the intervention was delivered by or accessed using a technological device or process, (4) the age range of the sample was between 18 and 25 years, and (5) the intervention was designed to improve, reduce, or change symptoms relating to a mental disorder. A total of 27 studies met inclusion criteria for the present review. Most of the studies (24/27, 89%) employed interventions targeting anxiety symptoms or disorders or stress, although almost one-third (7/24, 29%) targeted both depression and anxiety. There were a total of 51 technology-based interventions employed across the 27 studies. Overall, approximately half (24/51, 47%) were associated with at least 1 significant positive outcome compared with the control at postintervention. However, 29% (15/51) failed to find a significant effect. Effect sizes were calculated for the 18 of 51 interventions that provided sufficient data. Median effect size was 0.54 (range -0.07 to 3.04) for 8 interventions targeting depression and anxiety symptoms and 0.84 (range -0.07 to 2.66) for 10 interventions targeting anxiety symptoms and disorders. Internet-based technology (typically involving cognitive behavioral therapy) was the most commonly employed medium, being employed in 16 of 27 studies and approximately half of the 51 technology-based interventions (25/51, 49%). Distal and universal preventive interventions were the most common type of intervention. Some methodological problems were evident in the studies, with randomization methods either inadequate or inadequately described, few studies specifying a primary outcome, and most of the studies failing to undertake or report appropriate intent-to-treat analyses. The findings of this review indicate that although technological interventions targeting certain mental health and related problems offer promise for students in university settings, more high quality trials that fully report randomization methods, outcome data, and data analysis methods are needed.

The Common Law Threesome: Libel, Slander, and Invasion of Privacy.

ERIC Educational Resources Information Center

Anapol, Malthon M.

Unlike most of the regulatory constraints which have impact on the media, libel, slander, and invasion of privacy are common law concepts developed from the precedents of previous court decisions and from reasoning employed in the written judicial opinions of appellate courts. Since common law is thus both traditional in nature and subject to…

The Common Core Is a Change for the Better

ERIC Educational Resources Information Center

Gardner, Nancy S.; Powell, Rod

2014-01-01

The authors, two high school teachers, endorse the Common Core State Standards saying they will improve teaching and learning. The Common Core, they say, not only help students acquire the skills for success in life after high school, but they offer consistency in a student's educational journey and let employers know what to expect.…

Dealing with Diversity: On the Uses of Common Sense in Descartes and Montaigne

ERIC Educational Resources Information Center

De Marzio, Darryl M.

2010-01-01

This essay attempts to retrieve the notion of "common sense" within the writings of Descartes and Montaigne. I suggest that both writers represent distinct traditions in which the notion is employed. Descartes represents a modernist tradition in which common sense is understood to be a cognitive faculty, while Montaigne represents a humanist…

Comparing the landcapes of common retroviral insertion sites across tumor models

NASA Astrophysics Data System (ADS)

Weishaupt, Holger; Čančer, Matko; Engström, Cristopher; Silvestrov, Sergei; Swartling, Fredrik J.

2017-01-01

Retroviral tagging represents an important technique, which allows researchers to screen for candidate cancer genes. The technique is based on the integration of retroviral sequences into the genome of a host organism, which might then lead to the artificial inhibition or expression of proximal genetic elements. The identification of potential cancer genes in this framework involves the detection of genomic regions (common insertion sites; CIS) which contain a number of such viral integration sites that is greater than expected by chance. During the last two decades, a number of different methods have been discussed for the identification of such loci and the respective techniques have been applied to a variety of different retroviruses and/or tumor models. We have previously established a retrovirus driven brain tumor model and reported the CISs which were found based on a Monte Carlo statistics derived detection paradigm. In this study, we consider a recently proposed alternative graph theory based method for identifying CISs and compare the resulting CIS landscape in our brain tumor dataset to those obtained when using the Monte Carlo approach. Finally, we also employ the graph-based method to compare the CIS landscape in our brain tumor model with those of other published retroviral tumor models.

Smart sensor for real-time quantification of common symptoms present in unhealthy plants.

PubMed

Contreras-Medina, Luis M; Osornio-Rios, Roque A; Torres-Pacheco, Irineo; Romero-Troncoso, Rene de J; Guevara-González, Ramon G; Millan-Almaraz, Jesus R

2012-01-01

Plant responses to physiological function disorders are called symptoms and they are caused principally by pathogens and nutritional deficiencies. Plant symptoms are commonly used as indicators of the health and nutrition status of plants. Nowadays, the most popular method to quantify plant symptoms is based on visual estimations, consisting on evaluations that raters give based on their observation of plant symptoms; however, this method is inaccurate and imprecise because of its obvious subjectivity. Computational Vision has been employed in plant symptom quantification because of its accuracy and precision. Nevertheless, the systems developed so far lack in-situ, real-time and multi-symptom analysis. There exist methods to obtain information about the health and nutritional status of plants based on reflectance and chlorophyll fluorescence, but they use expensive equipment and are frequently destructive. Therefore, systems able of quantifying plant symptoms overcoming the aforementioned disadvantages that can serve as indicators of health and nutrition in plants are desirable. This paper reports an FPGA-based smart sensor able to perform non-destructive, real-time and in-situ analysis of leaf images to quantify multiple symptoms presented by diseased and malnourished plants; this system can serve as indicator of the health and nutrition in plants. The effectiveness of the proposed smart-sensor was successfully tested by analyzing diseased and malnourished plants.

Influenza Vaccination Coverage Among School Employees: Assessing Knowledge, Attitudes, and Behaviors

PubMed Central

de Perio, Marie A.; Wiegand, Douglas M.; Brueck, Scott E.

2015-01-01

BACKGROUND Influenza can spread among students, teachers, and staff in school settings. Vaccination is the most effective method to prevent influenza. We determined 2012–2013 influenza vaccination coverage among school employees, assessed knowledge and attitudes regarding the vaccine, and determined factors associated with vaccine receipt. METHODS We surveyed 412 (49%) of 841 employees at 1 suburban Ohio school district in March 2013. The Web-based survey assessed personal and work characteristics, vaccine receipt, and knowledge and attitudes regarding the vaccine. RESULTS Overall, 238 (58%) respondents reported getting the 2012–2013 influenza vaccine. The most common reason for getting the vaccine was to protect oneself or one’s family (87%). Beliefs that the vaccine was not needed (32%) or that it was not effective (21%) were the most common reasons for not getting it. Factors independently associated with vaccine receipt were having positive attitudes toward the vaccine, feeling external pressure to get it, and feeling personal control over whether to get it. CONCLUSIONS Influenza vaccine coverage among school employees should be improved. Messages encouraging school employees to get the vaccine should address misconceptions about the vaccine. Employers should use methods to maximize employee vaccination as part of a comprehensive influenza prevention program. PMID:25117893

Gender inequalities in occupational health related to the unequal distribution of working and employment conditions: a systematic review

PubMed Central

2013-01-01

Introduction Gender inequalities exist in work life, but little is known about their presence in relation to factors examined in occupation health settings. The aim of this study was to identify and summarize the working and employment conditions described as determinants of gender inequalities in occupational health in studies related to occupational health published between 1999 and 2010. Methods A systematic literature review was undertaken of studies available in MEDLINE, EMBASE, Sociological Abstracts, LILACS, EconLit and CINAHL between 1999 and 2010. Epidemiologic studies were selected by applying a set of inclusion criteria to the title, abstract, and complete text. The quality of the studies was also assessed. Selected studies were qualitatively analysed, resulting in a compilation of all differences between women and men in the prevalence of exposure to working and employment conditions and work-related health problems as outcomes. Results Most of the 30 studies included were conducted in Europe (n=19) and had a cross-sectional design (n=24). The most common topic analysed was related to the exposure to work-related psychosocial hazards (n=8). Employed women had more job insecurity, lower control, worse contractual working conditions and poorer self-perceived physical and mental health than men did. Conversely, employed men had a higher degree of physically demanding work, lower support, higher levels of effort-reward imbalance, higher job status, were more exposed to noise and worked longer hours than women did. Conclusions This systematic review has identified a set of working and employment conditions as determinants of gender inequalities in occupational health from the occupational health literature. These results may be useful to policy makers seeking to reduce gender inequalities in occupational health, and to researchers wishing to analyse these determinants in greater depth. PMID:23915121

[Detection of the introgression of genome elements of the Aegilops cylindrica host. into the Triticum aestivum L. genome by ISSR and SSR analysis].

PubMed

Galaev, A V; Babaiants, L T; Sivolap, Iu M

2004-12-01

To reveal sites of the donor genome in wheat crossed with Aegilops cylindrica, which acquired conferred resistance to fungal diseases, a comparative analysis of introgressive and parental forms was conducted. Two systems of PCR analysis, ISSR and SSR-PCR, were employed. Upon use of 7 ISSR primers in genotypes of 30 individual plants BC1 F9 belonging to lines 5/55-91 and 5/20-91, 19 ISSR loci were revealed and assigned to introgressive fragments of Aegilops cylindrica genome in Triticum aestivum. The 40 pairs of SSR primers allowed the detection of seven introgressive alleles; three of these alleles were located on common wheat chromosomes in the B genome, while four alleles, in the D genome. Based on data of microsatellite analysis, it was assumed that the telomeric region of the long arm of common wheat chromosome 6A also changed. ISSR and SSR methods were shown to be effective for detecting variability caused by introgression of foreign genetic material into the genome of common wheat.

Delayed reconstruction of lateral complex structures of the ankle

PubMed Central

Slater, Gordon L; Pino, Alejandro E; O’Malley, Martin

2011-01-01

Lateral ankle instability is one of the most common and well-recognized conditions presenting to foot and ankle surgeons. It may exist as an isolated entity or in conjunction with other concomitant pathology, making it important to appropriately diagnose and identify other conditions that may need to be addressed as part of treatment. These associated conditions may be a source of chronic pain, even when the instability has been appropriately treated, or may lead to failure of treatment by predisposing the patient to ankle inversion injuries. The primary goal of this editorial is to provide a brief summary of the common techniques used in the delayed reconstruction of lateral ankle ligamentous injuries and present a method we have successfully employed for over 15 years. We will also briefly discuss the diagnosis and treatment of the more common associated conditions, which are important to identify to achieve satisfactory results for the patient. We present the outcomes of 250 consecutive reconstructions performed over the last 10 years and describe our operative technique for addressing lateral ankle ligamentous injuries. PMID:22474633

A Kenyan perspective on the use of animals in science education and scientific research in Africa and prospects for improvement.

PubMed

Kimwele, Charles; Matheka, Duncan; Ferdowsian, Hope

2011-01-01

Animal experimentation is common in Africa, a region that accords little priority on animal protection in comparison to economic and social development. The current study aimed at investigating the prevalence of animal experimentation in Kenya, and to review shortfalls in policy, legislation, implementation and enforcement that result in inadequate animal care in Kenya and other African nations. Data was collected using questionnaires, administered at 39 highly ranked academic and research institutions aiming to identify those that used animals, their sources of animals, and application of the three Rs. Perceived challenges to the use of non-animal alternatives and common methods of euthanasia were also queried. Data was analyzed using Epidata, SPSS 16.0 and Microsoft Excel. Thirty-eight (97.4%) of thirty-nine institutions reported using animals for education and/or research. Thirty (76.9%) institutions reported using analgesics or anesthetics on a regular basis. Thirteen (33.3%) institutions regularly used statistical methods to minimize the use of animals. Overall, sixteen (41.0%) institutions explored the use of alternatives to animals such as cell cultures and computer simulation techniques, with one (2.6%) academic institution having completely replaced animals with computer modeling, manikins and visual illustrations. The commonest form of euthanasia employed was chloroform administration, reportedly in fourteen (29.8%) of 47 total methods (some institutions used more than one method). Twenty-eight (71.8%) institutions had no designated ethics committee to review or monitor protocols using animals. Animals are commonly used in academic and research institutions in Kenya. The relative lack of ethical guidance and oversight regarding the use of animals in research and education presents significant concerns.

Turkish pediatric surgical nurses' knowledge and attitudes regarding pain assessment and nonpharmacological and environmental methods in newborns' pain relief.

PubMed

Efe, Emine; Dikmen, Sevkiye; Altaş, Nuray; Boneval, Cem

2013-12-01

Effective pain management requires accurate knowledge, attitudes, and assessment skills. The purpose of the present study was to describe Turkish pediatric surgical nurses' knowledge and use of pain assessment and nonpharmacologic and environmental methods in relieving newborn's pain in hospital. The sample consisted of 111 pediatric surgical nurses employed in pediatric surgical unit in 15 university hospitals located in Turkey. A questionnaire was used to measure the nurses' knowledge and use of pain assessment, nonpharmacologic, and environmental methods. Data were analyzed with the use of descriptive statistics. Of the nurses that participated in the study, 83.8% were between the ages of 20 and 35 years, 54.1% had a bachelor degree, and 75.7% had a nursing experience ≤10 years. 50.5% stated that physiologic and behavioral indicators used in the assessment of pain in infants. The most commonly used nonpharmacologic methods were giving nonnutritive sucking, skin-to-skin contact, and holding. The most commonly used environmental methods were avoiding talking loudly close to the baby, minimal holding, care when opening and closing of the incubator, avoiding making noise when using wardrobe, drawers, trash, or nearby devices, such as radio and television, avoiding sharp fragrances, such as alcohol, perfume, near the baby, and reducing light sources. Although Turkish pediatric surgical nurses used some of the nonpharmacological and environmental methods in infant's pain relief, there remains a need for more education about pain management and for more frequent use of these methods in clinical care. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.

Toward practical terahertz time-domain spectroscopy

NASA Astrophysics Data System (ADS)

Brigada, David J.

Terahertz time-domain spectroscopy is a promising technology for the identification of explosive and pharmaceutical substances in adverse conditions. It interacts strongly with intermolecular vibrational and rotational modes. Terahertz also passes through many common dielectric covering materials, allowing for the identification of substances in envelopes, wrapped in opaque plastic, or otherwise hidden. However, there are several challenges preventing the adoption of terahertz spectroscopy outside the laboratory. This dissertation examines the problems preventing widespread adoption of terahertz technology and attempts to resolve them. In order to use terahertz spectroscopy to identify substances, a spectrum measured of the target sample must be compared to the spectra of various known standard samples. This dissertation examines various methods that can be employed throughout the entire process of acquiring and transforming terahertz waveforms to improve the accuracy of these comparisons. The concepts developed in this dissertation directly apply to terahertz spectroscopy, but also carry implications for other spectroscopy methods, from Raman to mass spectrometry. For example, these techniques could help to lower the rate of false positives at airport security checkpoints. This dissertation also examines the implementation of several of these methods as a way to realize a fully self-contained, handheld, battery-operated terahertz spectrometer. This device also employs techniques to allow minimally-trained operators use terahertz to detect different substances of interest. It functions as a proof-of-concept of the true benefits of the improvements that have been developed in this dissertation.

[Methods of cholesterol determination: conventional procedure or "dry chemistry"?].

PubMed

Riesen, W; Keller, H

1990-06-01

The search for the cardiovascular risk factor cholesterol should essentially be done in the physicians' laboratory. The majority of such analyses is performed by 'dry' chemistry tests. This review compares this technique with conventional methods for the determination of cholesterol. The reagents and the reaction mechanisms are principally the same for both techniques, i.e. fully enzymatic methods are used. In 'dry' chemistry the reagents are fixed on a solid carrier. The reactive state is provided by the liquid of the specimen. Two principles are employed: the technique of strips which is already utilised in urinary analysis and the system of multiple film layers as it is common in color-film technique. Three already introduced systems are discussed: the Seralyzer (Ames), the Ektachem (Kodak), and the Reflotron (Boehringer, Mannheim), and one system which is still in evaluation (the Clinistat, Ames). All the systems give a good agreement provided that they are operated by well-trained operators. Problems arise with quality control, since matrix effects are particularly important. The exactitude of the results depends on the calibration. Both, the Reflotron and the Clinistat are calibrated by the manufactories himself, the employer has no influence and is entirely dependent on the reliability of the producer. Although clinical chemistry analyses are facilitated by 'dry' chemistry it is by no means devoid of risks because the errors are more difficult to recognize.

A gas kinetic scheme for hybrid simulation of partially rarefied flows

NASA Astrophysics Data System (ADS)

Colonia, S.; Steijl, R.; Barakos, G.

2017-06-01

Approaches to predict flow fields that display rarefaction effects incur a cost in computational time and memory considerably higher than methods commonly employed for continuum flows. For this reason, to simulate flow fields where continuum and rarefied regimes coexist, hybrid techniques have been introduced. In the present work, analytically defined gas-kinetic schemes based on the Shakhov and Rykov models for monoatomic and diatomic gas flows, respectively, are proposed and evaluated with the aim to be used in the context of hybrid simulations. This should reduce the region where more expensive methods are needed by extending the validity of the continuum formulation. Moreover, since for high-speed rare¦ed gas flows it is necessary to take into account the nonequilibrium among the internal degrees of freedom, the extension of the approach to employ diatomic gas models including rotational relaxation process is a mandatory first step towards realistic simulations. Compared to previous works of Xu and coworkers, the presented scheme is de¦ned directly on the basis of kinetic models which involve a Prandtl number correction. Moreover, the methods are defined fully analytically instead of making use of Taylor expansion for the evaluation of the required derivatives. The scheme has been tested for various test cases and Mach numbers proving to produce reliable predictions in agreement with other approaches for near-continuum flows. Finally, the performance of the scheme, in terms of memory and computational time, compared to discrete velocity methods makes it a compelling alternative in place of more complex methods for hybrid simulations of weakly rarefied flows.

Expanded test method for peptides >2 kDa employing immunoaffinity purification and LC-HRMS/MS.

PubMed

Thomas, Andreas; Walpurgis, Katja; Tretzel, Laura; Brinkkötter, Paul; Fichant, Eric; Delahaut, Philippe; Schänzer, Wilhelm; Thevis, Mario

2015-01-01

Bioactive peptides with an approximate molecular mass of 2-12 kDa are of considerable relevance in sports drug testing. Such peptides have been used to manipulate several potential performance-enhancing processes in the athlete's body and include for example growth hormone releasing hormones (sermorelin, CJC-1293, CJC-1295, tesamorelin), synthetic/animal insulins (lispro, aspart, glulisine, glargine, detemir, degludec, bovine and porcine insulin), synthetic ACTH (synacthen), synthetic IGF-I (longR(3) -IGF-I) and mechano growth factors (human MGF, modified human MGF, 'full-length' MGF). A combined initial test method using one analytical procedure is a desirable tool in doping controls and related disciplines as requests for higher sample throughput with utmost comprehensiveness preferably at reduced costs are constantly issued. An approach modified from an earlier assay proved fit-for-purpose employing pre-concentration of all target analytes by means of ultrafiltration, immunoaffinity purification with coated paramagnetic beads, nano-ultra high performance liquid chromatography (UHPLC) separation, and subsequent detection by means of high resolution tandem mass spectrometry. The method was shown to be applicable to blood and urine samples, which represent the most common doping control specimens. The method was validated considering the parameters specificity, recovery (11-69%), linearity, imprecision (<25%), limit of detection (5-100 pg in urine, 0.1-2 ng in plasma), and ion suppression. The analysis of administration study samples for insulin degludec, detemir, aspart, and synacthen provided the essential data for the proof-of-principle of the method. Copyright © 2015 John Wiley & Sons, Ltd.

Who Gets the Job? First-Generation College Students' Perceptions of Employer Screening Methods

ERIC Educational Resources Information Center

Parks-Yancy, Rochelle; Cooley, Delonia

2018-01-01

What are first-generation college students' (FGCS) perspectives of employment screening methods? The authors investigate which methods FGCS believe are likely to cause an employer to extend a job offer and which methods yield the best pool of job applicants. Survey data were collected from undergraduate business majors. They were analyzed using…

Prospective performance evaluation of selected common virtual screening tools. Case study: Cyclooxygenase (COX) 1 and 2.

PubMed

Kaserer, Teresa; Temml, Veronika; Kutil, Zsofia; Vanek, Tomas; Landa, Premysl; Schuster, Daniela

2015-01-01

Computational methods can be applied in drug development for the identification of novel lead candidates, but also for the prediction of pharmacokinetic properties and potential adverse effects, thereby aiding to prioritize and identify the most promising compounds. In principle, several techniques are available for this purpose, however, which one is the most suitable for a specific research objective still requires further investigation. Within this study, the performance of several programs, representing common virtual screening methods, was compared in a prospective manner. First, we selected top-ranked virtual screening hits from the three methods pharmacophore modeling, shape-based modeling, and docking. For comparison, these hits were then additionally predicted by external pharmacophore- and 2D similarity-based bioactivity profiling tools. Subsequently, the biological activities of the selected hits were assessed in vitro, which allowed for evaluating and comparing the prospective performance of the applied tools. Although all methods performed well, considerable differences were observed concerning hit rates, true positive and true negative hits, and hitlist composition. Our results suggest that a rational selection of the applied method represents a powerful strategy to maximize the success of a research project, tightly linked to its aims. We employed cyclooxygenase as application example, however, the focus of this study lied on highlighting the differences in the virtual screening tool performances and not in the identification of novel COX-inhibitors. Copyright © 2015 The Authors. Published by Elsevier Masson SAS.. All rights reserved.

Employer Attitudes toward Study Abroad

ERIC Educational Resources Information Center

Trooboff, Stevan; Vande Berg, Michael; Rayman, Jack

2008-01-01

In recent years, as study abroad professionals have come to focus more squarely on the question of what students are in fact learning abroad, there has been increasing speculation about the extent to which study abroad increases prospects for employability following graduation. Common wisdom has it that undergraduates who study abroad have an…

Employment Counseling and Organizational Ethical Values

ERIC Educational Resources Information Center

Valentine, Sean

2004-01-01

Employment counseling is commonly used in companies to assist employees with various personal and professional challenges that are confronted in the workplace. Such guidance could affect the degree to which employees believe a company proactively supports an ethical orientation; the purpose of this study was to explore this issue. A self-report…

Students' mental models on the solubility and solubility product concept

NASA Astrophysics Data System (ADS)

Rahmi, Chusnur; Katmiati, Siti; Wiji, Mulyani, Sri

2017-05-01

This study aims to obtain some information regarding profile of students' mental models on the solubility and solubility product concept. A descriptive qualitative method was the method employed in the study. The participants of the study were students XI grade of a senior high school in Bandung. To collect the data, diagnostic test on mental model-prediction, observation, explanation (TDM-POE) instrument was employed in the study. The results of the study revealed that on the concept of precipitation formation of a reaction, 30% of students were not able to explain the precipitation formation of a reaction either in submicroscopic or symbolic level although the microscopic have been shown; 26% of students were able to explain the precipitation formation of a reaction based on the relation of Qsp and Ksp, but they were not able to explain the interaction of particles that involved in the reaction and to calculate Qsp; 26% of students were able to explain the precipitation formation of a reaction based on the relation of Qsp and Ksp, and determine the particles involved, but they did not have the knowledge about the interactions occured and were uncapable of calculating Qsp; and 18% of students were able to explain the precipitation formation of a reaction based on the relation of Qsp and Ksp, and determine the interactions of the particles involved in the reactions but they were not able to calculate Qsp. On the effect of adding common ions and decreasing pH towards the solubility concept, 96% of students were not able to explain the effect of adding common ions and decreasing pH towards the solubility either in submicroscopic or symbolic level although the microscopic have been shown; while 4% of students were only able to explain the effect of adding common ions towards the solubility based on the chemical equilibrium shifts and predict the effect of decreasing pH towards the solubility. However, they were not able to calculate the solubility before and after adding common ions and explain it up to the submicroscopic level either based on the shift of equilibrium solubility or the comparison of solubility calculation results before and after decreasing pH. Overall, the present study showed that most students obtain incomplete mental model on the solubility and solubility product concept. From the findings, it is recommended for the teachers to improve students' learning activity.

Capturing 3D resistivity of semi-arid karstic subsurface in varying moisture conditions using a wireless sensor network

NASA Astrophysics Data System (ADS)

Barnhart, K.; Oden, C. P.

2012-12-01

The dissolution of soluble bedrock results in surface and subterranean karst channels, which comprise 7-10% of the dry earth's surface. Karst serves as a preferential conduit to focus surface and subsurface water but it is difficult to exploit as a water resource or protect from pollution because of irregular structure and nonlinear hydrodynamic behavior. Geophysical characterization of karst commonly employs resistivity and seismic methods, but difficulties arise due to low resistivity contrast in arid environments and insufficient resolution of complex heterogeneous structures. To help reduce these difficulties, we employ a state-of-the-art wireless geophysical sensor array, which combines low-power radio telemetry and solar energy harvesting to enable long-term in-situ monitoring. The wireless aspect removes topological constraints common with standard wired resistivity equipment, which facilitates better coverage and/or sensor density to help improve aspect ratio and resolution. Continuous in-situ deployment allows data to be recorded according to nature's time scale; measurements are made during infrequent precipitation events which can increase resistivity contrast. The array is coordinated by a smart wireless bridge that continuously monitors local soil moisture content to detect when precipitation occurs, schedules resistivity surveys, and periodically relays data to the cloud via 3G cellular service. Traditional 2/3D gravity and seismic reflection surveys have also been conducted to clarify and corroborate results.

Assessment and correction of turbidity effects on Raman observations of chemicals in aqueous solutions.

PubMed

Sinfield, Joseph V; Monwuba, Chike K

2014-01-01

Improvements in diode laser, fiber optic, and data acquisition technologies are enabling increased use of Raman spectroscopic techniques for both in lab and in situ water analysis. Aqueous media encountered in the natural environment often contain suspended solids that can interfere with spectroscopic measurements, yet removal of these solids, for example, via filtration, can have even greater adverse effects on the extent to which subsequent measurements are representative of actual field conditions. In this context, this study focuses on evaluation of turbidity effects on Raman spectroscopic measurements of two common environmental pollutants in aqueous solution: ammonium nitrate and trichloroethylene. The former is typically encountered in the runoff from agricultural operations and is a strong scatterer that has no significant influence on the Raman spectrum of water. The latter is a commonly encountered pollutant at contaminated sites associated with degreasing and cleaning operations and is a weak scatterer that has a significant influence on the Raman spectrum of water. Raman observations of each compound in aqueous solutions of varying turbidity created by doping samples with silica flour with grain sizes ranging from 1.6 to 5.0 μm were employed to develop relationships between observed Raman signal strength and turbidity level. Shared characteristics of these relationships were then employed to define generalized correction methods for the effect of turbidity on Raman observations of compounds in aqueous solution.

Cancer stem cells in colorectal cancer: a review.

PubMed

Munro, Matthew J; Wickremesekera, Susrutha K; Peng, Lifeng; Tan, Swee T; Itinteang, Tinte

2018-02-01

Colorectal cancer (CRC) is the second most common cancer in women and the third most common in men. Adenocarcinoma accounts for 90% of CRC cases. There has been accumulating evidence in support of the cancer stem cell (CSC) concept of cancer which proposes that CSCs are central in the initiation of cancer. CSCs have been the focus of study in a range of cancers, including CRC. This has led to the identification and understanding of genes involved in the induction and maintenance of pluripotency of stem cells, and markers for CSCs, including those investigated specifically in CRC. Knowledge of the expression pattern of CSCs in CRC has been increasing in recent years, revealing a heterogeneous population of cells within CRC ranging from pluripotent to differentiated cells, with overlapping and sometimes unique combinations of markers. This review summarises current literature on the understanding of CSCs in CRC, including evidence of the presence of CSC subpopulations, and the stem cell markers currently used to identify and localise these CSC subpopulations. Future research into this field may lead to improved methods for early detection of CRC, novel therapy and monitoring of treatment for CRC and other cancer types. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

To What Extent Is Long-term Care Representative of Elderly Care? A Case Study of Elderly Care Financing in Lombardy, Italy.

PubMed

Brenna, Elenka; Gitto, Lara

2017-02-25

The ageing of European population has been rapidly increasing during the last decades, and the problem of elderly care financing has become an issue for policy-makers. Long-term care (LTC) financing is considered a suitable proxy of the resources committed to elderly care by each government, but the preciseness of this approximation depends on the extent to which LTC is representative of elderly care within each country. Since there is a broad heterogeneity in LTC funding, organization and setting among European States, it is difficult to find a common parameter representing the public resources destined to the elderly care. We address these topics employing as a case study an Italian region, Lombardy, which in terms of population, dimension, healthcare organization and economic development could be compared to other European countries. The method we suggest, which consists basically in a careful estimate of all the public resources employed in the provision of services exclusively destined to the elderly, could be applied, with the due differences, to other European countries or regions. © 2017 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Systematic reviews: Separating fact from fiction.

PubMed

Haddaway, Neal R; Bilotta, Gary S

2016-01-01

The volume of scientific literature continues to expand and decision-makers are faced with increasingly unmanageable volumes of evidence to assess. Systematic reviews (SRs) are powerful tools that aim to provide comprehensive, transparent, reproducible and updateable summaries of evidence. SR methods were developed, and have been employed, in healthcare for more than two decades, and they are now widely used across a broad range of topics, including environmental management and social interventions in crime and justice, education, international development, and social welfare. Despite these successes and the increasing acceptance of SR methods as a 'gold standard' in evidence-informed policy and practice, misconceptions still remain regarding their applicability. The aim of this article is to separate fact from fiction, addressing twelve common misconceptions that can influence the decision as to whether a SR is the most appropriate method for evidence synthesis for a given topic. Through examples, we illustrate the flexibility of SR methods and demonstrate their suitability for addressing issues on environmental health and chemical risk assessment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Dechlorination by ultraviolet radiation: a suitable alternative to activated carbon in dialysis water systems?

PubMed

James, Ray

2009-12-01

Chlorine-based products are widely used in the water supply industry, and the potential for adverse effects in the haemodialysis setting is well documented. To date, the most commonly used method of chlorine removal has been granular activated carbon filters. An increasingly popular method of dechlorination is the use of high intensity, broad-spectrum UV systems to reduce both free chlorine and combined chlorine compounds (chloramines) into easily removed by-products. UV radiation has been successfully used in the pharmaceutical and food industries to destroy free chlorine and/or chloramines present in water, and kill all known spoilage microorganisms including bacteria, viruses, yeasts and moulds (and their spores). This nonchemical method can offer significant advantages and benefits compared to conventional dechlorination technologies currently employed in dialysis water systems. Whilst UV treatment at 254 nm wavelength has been routinely used for disinfection purposes in dialysis water systems, this paper considers whether UV radiation can be used as an alternative to more traditional methods of chlorine removal.

A graphic method for identification of novel glioma related genes.

PubMed

Gao, Yu-Fei; Shu, Yang; Yang, Lei; He, Yi-Chun; Li, Li-Peng; Huang, GuaHua; Li, Hai-Peng; Jiang, Yang

2014-01-01

Glioma, as the most common and lethal intracranial tumor, is a serious disease that causes many deaths every year. Good comprehension of the mechanism underlying this disease is very helpful to design effective treatments. However, up to now, the knowledge of this disease is still limited. It is an important step to understand the mechanism underlying this disease by uncovering its related genes. In this study, a graphic method was proposed to identify novel glioma related genes based on known glioma related genes. A weighted graph was constructed according to the protein-protein interaction information retrieved from STRING and the well-known shortest path algorithm was employed to discover novel genes. The following analysis suggests that some of them are related to the biological process of glioma, proving that our method was effective in identifying novel glioma related genes. We hope that the proposed method would be applied to study other diseases and provide useful information to medical workers, thereby designing effective treatments of different diseases.

Recent advances in integrated photonic sensors.

PubMed

Passaro, Vittorio M N; de Tullio, Corrado; Troia, Benedetto; La Notte, Mario; Giannoccaro, Giovanni; De Leonardis, Francesco

2012-11-09

Nowadays, optical devices and circuits are becoming fundamental components in several application fields such as medicine, biotechnology, automotive, aerospace, food quality control, chemistry, to name a few. In this context, we propose a complete review on integrated photonic sensors, with specific attention to materials, technologies, architectures and optical sensing principles. To this aim, sensing principles commonly used in optical detection are presented, focusing on sensor performance features such as sensitivity, selectivity and rangeability. Since photonic sensors provide substantial benefits regarding compatibility with CMOS technology and integration on chips characterized by micrometric footprints, design and optimization strategies of photonic devices are widely discussed for sensing applications. In addition, several numerical methods employed in photonic circuits and devices, simulations and design are presented, focusing on their advantages and drawbacks. Finally, recent developments in the field of photonic sensing are reviewed, considering advanced photonic sensor architectures based on linear and non-linear optical effects and to be employed in chemical/biochemical sensing, angular velocity and electric field detection.

Recent Advances in Integrated Photonic Sensors

PubMed Central

Passaro, Vittorio M. N.; de Tullio, Corrado; Troia, Benedetto; La Notte, Mario; Giannoccaro, Giovanni; De Leonardis, Francesco

2012-01-01

Nowadays, optical devices and circuits are becoming fundamental components in several application fields such as medicine, biotechnology, automotive, aerospace, food quality control, chemistry, to name a few. In this context, we propose a complete review on integrated photonic sensors, with specific attention to materials, technologies, architectures and optical sensing principles. To this aim, sensing principles commonly used in optical detection are presented, focusing on sensor performance features such as sensitivity, selectivity and rangeability. Since photonic sensors provide substantial benefits regarding compatibility with CMOS technology and integration on chips characterized by micrometric footprints, design and optimization strategies of photonic devices are widely discussed for sensing applications. In addition, several numerical methods employed in photonic circuits and devices, simulations and design are presented, focusing on their advantages and drawbacks. Finally, recent developments in the field of photonic sensing are reviewed, considering advanced photonic sensor architectures based on linear and non-linear optical effects and to be employed in chemical/biochemical sensing, angular velocity and electric field detection. PMID:23202223

Two Analyte Calibration From The Transient Response Of Potentiometric Sensors Employed With The SIA Technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cartas, Raul; Mimendia, Aitor; Valle, Manel del

2009-05-23

Calibration models for multi-analyte electronic tongues have been commonly built using a set of sensors, at least one per analyte under study. Complex signals recorded with these systems are formed by the sensors' responses to the analytes of interest plus interferents, from which a multivariate response model is then developed. This work describes a data treatment method for the simultaneous quantification of two species in solution employing the signal from a single sensor. The approach used here takes advantage of the complex information recorded with one electrode's transient after insertion of sample for building the calibration models for both analytes.more » The departure information from the electrode was firstly processed by discrete wavelet for transforming the signals to extract useful information and reduce its length, and then by artificial neural networks for fitting a model. Two different potentiometric sensors were used as study case for simultaneously corroborating the effectiveness of the approach.« less

Sensitivity vector fields in time-delay coordinate embeddings: theory and experiment.

PubMed

Sloboda, A R; Epureanu, B I

2013-02-01

Identifying changes in the parameters of a dynamical system can be vital in many diagnostic and sensing applications. Sensitivity vector fields (SVFs) are one way of identifying such parametric variations by quantifying their effects on the morphology of a dynamical system's attractor. In many cases, SVFs are a more effective means of identification than commonly employed modal methods. Previously, it has only been possible to construct SVFs for a given dynamical system when a full set of state variables is available. This severely restricts SVF applicability because it may be cost prohibitive, or even impossible, to measure the entire state in high-dimensional systems. Thus, the focus of this paper is constructing SVFs with only partial knowledge of the state by using time-delay coordinate embeddings. Local models are employed in which the embedded states of a neighborhood are weighted in a way referred to as embedded point cloud averaging. Application of the presented methodology to both simulated and experimental time series demonstrates its utility and reliability.

A matter of collection and detection for intraoperative and noninvasive near-infrared fluorescence molecular imaging: To see or not to see?

PubMed Central

Zhu, Banghe; Rasmussen, John C.; Sevick-Muraca, Eva M.

2014-01-01

Purpose: Although fluorescence molecular imaging is rapidly evolving as a new combinational drug/device technology platform for molecularly guided surgery and noninvasive imaging, there remains no performance standards for efficient translation of “first-in-humans” fluorescent imaging agents using these devices. Methods: The authors employed a stable, solid phantom designed to exaggerate the confounding effects of tissue light scattering and to mimic low concentrations (nM–pM) of near-infrared fluorescent dyes expected clinically for molecular imaging in order to evaluate and compare the commonly used charge coupled device (CCD) camera systems employed in preclinical studies and in human investigational studies. Results: The results show that intensified CCD systems offer greater contrast with larger signal-to-noise ratios in comparison to their unintensified CCD systems operated at clinically reasonable, subsecond acquisition times. Conclusions: Camera imaging performance could impact the success of future “first-in-humans” near-infrared fluorescence imaging agent studies. PMID:24506637

Exploring the relationship between employer recordkeeping and underreporting in the BLS Survey of Occupational Injuries and Illnesses.

PubMed

Wuellner, Sara E; Bonauto, David K

2014-10-01

Little empirical data exist to identify the reasons for underreporting in the US Bureau of Labor Statistics (BLS) non-fatal occupational injury and illness data. We interviewed occupational injury and illness record keepers from Washington State establishments that participated in the 2008 BLS Survey of Occupational Injuries and Illnesses (SOII). Qualitative and quantitative methods were used to explore recordkeeping and business practices that may explain SOII's incomplete case capture compared with WC claims data. Most participants (90%) did not comply with OSHA recordkeeping regulations. Other factors including using workplace injury data to evaluate supervisors' or SOII respondent's job performance, recording injuries for a worksite that operates multiple shifts, and failing to follow SOII instructions were more common among establishments with unreported WC claims. Business practices that incentivize low injury rates, disorganized recordkeeping, and limited communication between BLS and survey respondents are barriers to accurate employer reports of work-related injuries and illnesses. © 2014 The Authors. American Journal of Industrial Medicine published by Wiley Periodicals, Inc.

A matter of collection and detection for intraoperative and noninvasive near-infrared fluorescence molecular imaging: To see or not to see?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Banghe; Rasmussen, John C.; Sevick-Muraca, Eva M., E-mail: Eva.Sevick@uth.tmc.edu

2014-02-15

Purpose: Although fluorescence molecular imaging is rapidly evolving as a new combinational drug/device technology platform for molecularly guided surgery and noninvasive imaging, there remains no performance standards for efficient translation of “first-in-humans” fluorescent imaging agents using these devices. Methods: The authors employed a stable, solid phantom designed to exaggerate the confounding effects of tissue light scattering and to mimic low concentrations (nM–pM) of near-infrared fluorescent dyes expected clinically for molecular imaging in order to evaluate and compare the commonly used charge coupled device (CCD) camera systems employed in preclinical studies and in human investigational studies. Results: The results show thatmore » intensified CCD systems offer greater contrast with larger signal-to-noise ratios in comparison to their unintensified CCD systems operated at clinically reasonable, subsecond acquisition times. Conclusions: Camera imaging performance could impact the success of future “first-in-humans” near-infrared fluorescence imaging agent studies.« less

Obstetric balloon for treatment of foreshortened vagina using the McIndoe technique.

PubMed

Rauktys, Aubrey; Parikh, Pranay; Harmanli, Oz

2015-01-01

When conservative options such as the use of vaginal dilators fail, the McIndoe technique may be used in the surgical treatment of a foreshortened vagina. The McIndoe procedure, an approach commonly used for the treatment of vaginal agenesis, requires a mold over which a skin graft is sutured and placed inside the vagina. In most surgical descriptions, this mold is made from non-sterile foam, condoms, or gloves. Because makeshift molds can no longer be used in operating rooms owing to strict regulations, alternative methods must be employed. The obstetric balloon is a good choice for use as a soft and adjustable vaginal mold for a modified McIndoe procedure because it is readily available as an approved device in hospitals that provide obstetric services. This technique was successfully employed in a 54-year-old woman to treat foreshortened vagina. An obstetric balloon can be used effectively as a mold for vaginal reconstruction with the McIndoe technique.

Job dissatisfaction and the older worker: baseline findings from the Health and Employment After Fifty study

PubMed Central

D’Angelo, Stefania; Coggon, David; Harris, E Clare; Linaker, Cathy; Sayer, Avan Aihie; Gale, Catharine R; Evandrou, Maria; van Staa, Tjeerd; Cooper, Cyrus; Walker-Bone, Karen; Palmer, Keith T

2016-01-01

Objectives Demographic changes are requiring people to work longer. Labour force participation might be promoted by tackling sources of job dissatisfaction. We aimed to describe the epidemiology of job dissatisfaction in older British workers, to explore which perceptions of work contribute most importantly, and to assess possible impacts on health. Methods Subjects aged 50-64 years were recruited from 24 English general practices. At baseline, those currently in work (N=5,437) reported on their demographic and employment circumstances, overall job satisfaction, perceptions of their work that might contribute to dissatisfaction, and their general health, mood and well-being. Associations of job dissatisfaction with risk factors and potential health outcomes were assessed cross-sectionally by logistic regression and the potential contributions of different negative perceptions to overall dissatisfaction were summarised by population attributable fractions (PAFs). Results Job dissatisfaction was more common among men, below age 60 years, those living in London and the South East, in the more educated and in those working for larger employers. The main contributors to job dissatisfaction among employees were feeling unappreciated and/or lacking a sense of achievement (PAF 55%-56%), while in the self-employed, job insecurity was the leading contributor (PAF 79%). Job dissatisfaction was associated with all of the adverse health outcomes examined (odds ratios of 3-5), as were most of the negative perceptions of work that contributed to overall dissatisfaction. Conclusions Employment policies aimed at improving job satisfaction in older workers may benefit from focussing particularly on relationships in the workplace, fairness, job security and instilling a sense of achievement. PMID:27152012

Occupational issues of adults with ADHD

PubMed Central

2013-01-01

Background ADHD is a common neurodevelopmental disorder that persists into adulthood. Its symptoms cause impairments in a number of social domains, one of which is employment. We wish to produce a consensus statement on how ADHD affects employment. Methods This consensus development conference statement was developed as a result of a joint international meeting held in July 2010. The consensus committee was international in scope (United Kingdom, mainland Europe, United Arab Emirates) and consisted of individuals from a broad range of backgrounds (Psychiatry, Occupational Medicine, Health Economists, Disability Advisors). The objectives of the conference were to discuss some of the occupational impairments adults with ADHD may face and how to address these problems from an inclusive perspective. Furthermore the conference looked at influencing policy and decision making at a political level to address impaired occupational functioning in adults with ADHD and fears around employing people with disabilities in general. Results The consensus was that there were clear weaknesses in the current arrangements in the UK and internationally to address occupational difficulties. More so, Occupational Health was not wholly integrated and used as a means of making positive changes to the workplace, but rather as a superfluous last resort that employers tried to avoid. Furthermore the lack of cross professional collaboration on occupational functioning in adults with ADHD was a significant problem. Conclusions Future research needs to concentrate on further investigating occupational functioning in adults with ADHD and pilot exploratory initiatives and tools, leading to a better and more informed understanding of possible barriers to employment and potential schemes to put in place to address these problems. PMID:23414364

Expert recommendations for implementing change (ERIC): protocol for a mixed methods study

PubMed Central

2014-01-01

Background Identifying feasible and effective implementation strategies that are contextually appropriate is a challenge for researchers and implementers, exacerbated by the lack of conceptual clarity surrounding terms and definitions for implementation strategies, as well as a literature that provides imperfect guidance regarding how one might select strategies for a given healthcare quality improvement effort. In this study, we will engage an Expert Panel comprising implementation scientists and mental health clinical managers to: establish consensus on a common nomenclature for implementation strategy terms, definitions and categories; and develop recommendations to enhance the match between implementation strategies selected to facilitate the use of evidence-based programs and the context of certain service settings, in this case the U.S. Department of Veterans Affairs (VA) mental health services. Methods/Design This study will use purposive sampling to recruit an Expert Panel comprising implementation science experts and VA mental health clinical managers. A novel, four-stage sequential mixed methods design will be employed. During Stage 1, the Expert Panel will participate in a modified Delphi process in which a published taxonomy of implementation strategies will be used to establish consensus on terms and definitions for implementation strategies. In Stage 2, the panelists will complete a concept mapping task, which will yield conceptually distinct categories of implementation strategies as well as ratings of the feasibility and effectiveness of each strategy. Utilizing the common nomenclature developed in Stages 1 and 2, panelists will complete an innovative menu-based choice task in Stage 3 that involves matching implementation strategies to hypothetical implementation scenarios with varying contexts. This allows for quantitative characterizations of the relative necessity of each implementation strategy for a given scenario. In Stage 4, a live web-based facilitated expert recommendation process will be employed to establish expert recommendations about which implementations strategies are essential for each phase of implementation in each scenario. Discussion Using a novel method of selecting implementation strategies for use within specific contexts, this study contributes to our understanding of implementation science and practice by sharpening conceptual distinctions among a comprehensive collection of implementation strategies. PMID:24669765

[Near infrared analysis of blending homogeneity of Chinese medicine formula particles based on moving window F test method].

PubMed

Yang, Chan; Xu, Bing; Zhang, Zhi-Qiang; Wang, Xin; Shi, Xin-Yuan; Fu, Jing; Qiao, Yan-Jiang

2016-10-01

Blending uniformity is essential to ensure the homogeneity of Chinese medicine formula particles within each batch. This study was based on the blending process of ebony spray dried powder and dextrin(the proportion of dextrin was 10%),in which the analysis of near infrared (NIR) diffuse reflectance spectra was collected from six different sampling points in combination with moving window F test method in order to assess the blending uniformity of the blending process.The method was validated by the changes of citric acid content determined by the HPLC. The results of moving window F test method showed that the ebony spray dried powder and dextrin was homogeneous during 200-300 r and was segregated during 300-400 r. An advantage of this method is that the threshold value is defined statistically, not empirically and thus does not suffer from threshold ambiguities in common with the moving block standard deviatiun (MBSD). And this method could be employed to monitor other blending process of Chinese medicine powders on line. Copyright© by the Chinese Pharmaceutical Association.

Clinical experimental stress studies: methods and assessment.

PubMed

Bali, Anjana; Jaggi, Amteshwar Singh

2015-01-01

Stress is a state of threatened homeostasis during which a variety of adaptive processes are activated to produce physiological and behavioral changes. Stress induction methods are pivotal for understanding these physiological or pathophysiological changes in the body in response to stress. Furthermore, these methods are also important for the development of novel pharmacological agents for stress management. The well-described methods to induce stress in humans include the cold pressor test, Trier Social Stress Test, Montreal Imaging Stress Task, Maastricht Acute Stress Test, CO2 challenge test, Stroop test, Paced Auditory Serial Addition Task, noise stress, and Mannheim Multicomponent Stress Test. Stress assessment in humans is done by measuring biochemical markers such as cortisol, cortisol awakening response, dexamethasone suppression test, salivary α-amylase, plasma/urinary norepinephrine, norepinephrine spillover rate, and interleukins. Physiological and behavioral changes such as galvanic skin response, heart rate variability, pupil size, and muscle and/or skin sympathetic nerve activity (microneurography) and cardiovascular parameters such as heart rate, blood pressure, and self-reported anxiety are also monitored to assess stress response. This present review describes these commonly employed methods to induce stress in humans along with stress assessment methods.

Protocol for validation of the 4AT, a rapid screening tool for delirium: a multicentre prospective diagnostic test accuracy study.

PubMed

Shenkin, Susan D; Fox, Christopher; Godfrey, Mary; Siddiqi, Najma; Goodacre, Steve; Young, John; Anand, Atul; Gray, Alasdair; Smith, Joel; Ryan, Tracy; Hanley, Janet; MacRaild, Allan; Steven, Jill; Black, Polly L; Boyd, Julia; Weir, Christopher J; MacLullich, Alasdair Mj

2018-02-10

Delirium is a severe neuropsychiatric syndrome of rapid onset, commonly precipitated by acute illness. It is common in older people in the emergency department (ED) and acute hospital, but greatly under-recognised in these and other settings. Delirium and other forms of cognitive impairment, particularly dementia, commonly coexist. There is a need for a rapid delirium screening tool that can be administered by a range of professional-level healthcare staff to patients with sensory or functional impairments in a busy clinical environment, which also incorporates general cognitive assessment. We developed the 4 'A's Test (4AT) for this purpose. This study's primary objective is to validate the 4AT against a reference standard. Secondary objectives include (1) comparing the 4AT with another widely used test (the Confusion Assessment Method (CAM)); (2) determining if the 4AT is sensitive to general cognitive impairment; (3) assessing if 4AT scores predict outcomes, including (4) a health economic analysis. 900 patients aged 70 or over in EDs or acute general medical wards will be recruited in three sites (Edinburgh, Bradford and Sheffield) over 18 months. Each patient will undergo a reference standard delirium assessment and will be randomised to assessment with either the 4AT or the CAM. At 12 weeks, outcomes (length of stay, institutionalisation and mortality) and resource utilisation will be collected by a questionnaire and via the electronic patient record. Ethical approval was granted in Scotland and England. The study involves administering tests commonly used in clinical practice. The main ethical issues are the essential recruitment of people without capacity. Dissemination is planned via publication in high impact journals, presentation at conferences, social media and the website www.the4AT.com. ISRCTN53388093; Pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

19 CFR 201.9 - Methods employed in obtaining information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Methods employed in obtaining information. 201.9 Section 201.9 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Initiation and Conduct of Investigations § 201.9 Methods employed in obtaining information. In...

19 CFR 201.9 - Methods employed in obtaining information.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Methods employed in obtaining information. 201.9 Section 201.9 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Initiation and Conduct of Investigations § 201.9 Methods employed in obtaining information. In...

Stochastic quantization of (λϕ4)d scalar theory: Generalized Langevin equation with memory kernel

NASA Astrophysics Data System (ADS)

Menezes, G.; Svaiter, N. F.

2007-02-01

The method of stochastic quantization for a scalar field theory is reviewed. A brief survey for the case of self-interacting scalar field, implementing the stochastic perturbation theory up to the one-loop level, is presented. Then, it is introduced a colored random noise in the Einstein's relations, a common prescription employed by one of the stochastic regularizations, to control the ultraviolet divergences of the theory. This formalism is extended to the case where a Langevin equation with a memory kernel is used. It is shown that, maintaining the Einstein's relations with a colored noise, there is convergence to a non-regularized theory.

Computer vision applications for coronagraphic optical alignment and image processing.

PubMed

Savransky, Dmitry; Thomas, Sandrine J; Poyneer, Lisa A; Macintosh, Bruce A

2013-05-10

Modern coronagraphic systems require very precise alignment between optical components and can benefit greatly from automated image processing. We discuss three techniques commonly employed in the fields of computer vision and image analysis as applied to the Gemini Planet Imager, a new facility instrument for the Gemini South Observatory. We describe how feature extraction and clustering methods can be used to aid in automated system alignment tasks, and also present a search algorithm for finding regular features in science images used for calibration and data processing. Along with discussions of each technique, we present our specific implementation and show results of each one in operation.

Dietary Assessment on a Mobile Phone Using Image Processing and Pattern Recognition Techniques: Algorithm Design and System Prototyping.

PubMed

Probst, Yasmine; Nguyen, Duc Thanh; Tran, Minh Khoi; Li, Wanqing

2015-07-27

Dietary assessment, while traditionally based on pen-and-paper, is rapidly moving towards automatic approaches. This study describes an Australian automatic food record method and its prototype for dietary assessment via the use of a mobile phone and techniques of image processing and pattern recognition. Common visual features including scale invariant feature transformation (SIFT), local binary patterns (LBP), and colour are used for describing food images. The popular bag-of-words (BoW) model is employed for recognizing the images taken by a mobile phone for dietary assessment. Technical details are provided together with discussions on the issues and future work.