A Cost-Effectiveness/Benefit Analysis Model for Postsecondary Vocational Programs. Technical Report.

ERIC Educational Resources Information Center

Kim, Jin Eun

A cost-effectiveness/benefit analysis is defined as a technique for measuring the outputs of existing and new programs in relation to their specified program objectives, against the costs of those programs. In terms of its specific use, the technique is conceptualized as a systems analysis method, an evaluation method, and a planning tool for…

76 FR 58514 - Medicare Program; Meeting of the Technical Advisory Panel on Medicare Trustee Reports

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... to be very technical in nature and will focus on the actuarial and economic assumptions and methods... discussion is expected to focus on highly technical aspects of estimation involving economics and actuarial science. Panelists are not restricted, however, in the topics that they choose to discuss. Procedure and...

Spectrum orbit utilization program technical manual SOUP5 Version 3.8

NASA Technical Reports Server (NTRS)

Davidson, J.; Ottey, H. R.; Sawitz, P.; Zusman, F. S.

1984-01-01

The underlying engineering and mathematical models as well as the computational methods used by the SOUP5 analysis programs, which are part of the R2BCSAT-83 Broadcast Satellite Computational System, are described. Included are the algorithms used to calculate the technical parameters and references to the relevant technical literature. The system provides the following capabilities: requirements file maintenance, data base maintenance, elliptical satellite beam fitting to service areas, plan synthesis from specified requirements, plan analysis, and report generation/query. Each of these functions are briefly described.

Blending Face-to-Face and Distance Learning Methods in Adult and Career-Technical Education. Practice Application Brief No. 23.

ERIC Educational Resources Information Center

Wonacott, Michael E.

Both face-to-face and distance learning methods are currently being used in adult education and career and technical education. In theory, the advantages of face-to-face and distance learning methods complement each other. In practice, however, both face-to-face and information and communications technology (ICT)-based distance programs often rely…

STEM integration in middle school career and technical education programs: A Delphi design study

NASA Astrophysics Data System (ADS)

Wu-Rorrer, Billy Ray

The purpose of this qualitative method study with a Delphi research design sought to determine how STEM programs can be effectively integrated into middle school career and technical education programs by local, state, and national educators, administrators, directors, specialists, and curriculum writers. The significance of the study is to provide leaders in CTE with a greater awareness, insight, and strategies about how CTE programs can more effectively integrate academics into career and technical education programs through STEM-related programming. The findings will increase the limited amount of available literature providing best practice strategies for the integration of STEM curriculum into middle school CTE programs. One basic question has guided this research: How can STEM programs be effectively integrated into middle school career and technical education programs? A total of twelve strategies were identified. The strategies of real-world applications and administrative buy-in were the two predominant strategies consistently addressed throughout the review of literature and all three sub-questions in the research study. The Delphi design study consisted of pilot round and three rounds of data collection on barriers, strategies, and professional development for STEM integration in middle school career and technical education programs. Four panelists participated in the pilot round, and 16 panel members not involved in the pilot round participated in the three rounds of questioning and consensus building. In the future, more comprehensive studies can build upon this foundational investigation of middle school CTE programs.

State “Technical Assistance Programs” for nursing home quality improvement: variations and potential implications

PubMed Central

Li, Yue; Spector, Williams D.; Glance, Laurent G.; Mukamel, Dana B.

2013-01-01

Context To improve nursing home quality, many states developed “Technical Assistance Programs” that provide on-site consultation and training for nursing facility staff. Methods We conducted a national survey on these state programs to collect data on program design, operations, financing, and perceived effectiveness. Results As of 2010, 17 states have developed such programs. Compared to existing state nursing home quality regulations, these programs represent a collaborative, rather than enforcement-oriented, approach to quality. However, existing programs vary substantially in key structural features such as staffing patterns, funding levels, and relationship with state survey and certification agencies. Perceived effectiveness by program officials on quality was high, although few states have performed formal evaluations. Perceived barriers to program effectiveness included lack of appropriate staff and funding, among others. Conclusion State “Technical Assistance Programs” for nursing homes varies in program design and perceived effectiveness. Future comparative evaluations are needed to inform evidence-based quality initiatives. PMID:23216345

QUARTERLY TECHNICAL PROGRESS REPORT, JULY, AUGUST, SEPTEMBER 1966.

DTIC Science & Technology

Contents: Circuit research program; Hardware systems research; Software systems research program; Numerical methods, computer arithmetic and...artificial languages; Library automation; Illiac II service , use, and program development; IBM service , use, and program development; Problem specifications; Switching theory and logical design; General laboratory information.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The purpose of this report is to summarize the activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for Fiscal Year (FY) 1993 (October 1992 through September 1993). This annual report is the tenth for the ACL and describes continuing effort on projects, work on new projects, and contributions of the ACL staff to various programs at ANL. The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of analytical chemistry support services to the scientific and engineering programs at ANL. The ACL also has research programs in analyticalmore » chemistry, conducts instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems. Some routine or standard analyses are done, but it is common for the Argonne programs to generate unique problems that require development or modification of methods and adaption of techniques to obtain useful analytical data. The ACL is administratively within the Chemical Technology Division (CMT), its principal ANL client, but provides technical support for many of the technical divisions and programs at ANL. The ACL has four technical groups--Chemical Analysis, Instrumental Analysis, Organic Analysis, and Environmental Analysis--which together include about 45 technical staff members. Talents and interests of staff members cross the group lines, as do many projects within the ACL.« less

A National Survey on Teaching and Assessing Technical Proficiency in Vascular Surgery in Canada.

PubMed

Drudi, Laura; Hossain, Sajjid; Mackenzie, Kent S; Corriveau, Marc-Michel; Abraham, Cherrie Z; Obrand, Daniel I; Vassiliou, Melina; Gill, Heather; Steinmetz, Oren K

2016-05-01

This survey aims to explore trainees' perspectives on how Canadian vascular surgery training programs are using simulation in teaching and assessing technical skills through a cross-sectional national survey. A 10-min online questionnaire was sent to Program Directors of Canada's Royal College of Physicians and Surgeons' of Canada approved training programs in vascular surgery. This survey was distributed among residents and fellows who were studying in the 2013-2014 academic year. Twenty-eight (58%) of the 48 Canadian vascular surgery trainees completed the survey. A total of 68% of the respondents were part of the 0 + 5 integrated vascular surgery training program. The use of simulation in the assessment of technical skills at the beginning of training was reported by only 3 (11%) respondents, whereas 43% reported that simulation was used in their programs in the assessment of technical skills at some time during their training. Training programs most often provided simulation as a method of teaching and learning endovascular abdominal aortic or thoracic aneurysm repair (64%). Furthermore, 96% of trainees reported the most common resource to learn and enhance technical skills was dialog with vascular surgery staff. Surveyed vascular surgery trainees in Canada report that simulation is rarely used as a tool to assess baseline technical skills at the beginning of training. Less than half of surveyed trainees in vascular surgery programs in Canada report that simulation is being used for skills acquisition. Currently, in Canadian training programs, simulation is most commonly used to teach endovascular skills. Copyright © 2016 Elsevier Inc. All rights reserved.

Key issues and technical route of cyber physical distribution system

NASA Astrophysics Data System (ADS)

Zheng, P. X.; Chen, B.; Zheng, L. J.; Zhang, G. L.; Fan, Y. L.; Pei, T.

2017-01-01

Relying on the National High Technology Research and Development Program, this paper introduced the key issues in Cyber Physical Distribution System (CPDS), mainly includes: composite modelling method and interaction mechanism, system planning method, security defence technology, distributed control theory. Then on this basis, the corresponding technical route is proposed, and a more detailed research framework along with main schemes to be adopted is also presented.

Development of a technical assistance framework for building organizational capacity of health programs in resource-limited settings.

PubMed

Reyes, E Michael; Sharma, Anjali; Thomas, Kate K; Kuehn, Chuck; Morales, José Rafael

2014-09-17

Little information exists on the technical assistance needs of local indigenous organizations charged with managing HIV care and treatment programs funded by the US President's Emergency Plan for AIDS Relief (PEPFAR). This paper describes the methods used to adapt the Primary Care Assessment Tool (PCAT) framework, which has successfully strengthened HIV primary care services in the US, into one that could strengthen the capacity of local partners to deliver priority health programs in resource-constrained settings by identifying their specific technical assistance needs. Qualitative methods and inductive reasoning approaches were used to conceptualize and adapt the new Clinical Assessment for Systems Strengthening (ClASS) framework. Stakeholder interviews, comparisons of existing assessment tools, and a pilot test helped determine the overall ClASS framework for use in low-resource settings. The framework was further refined one year post-ClASS implementation. Stakeholder interviews, assessment of existing tools, a pilot process and the one-year post- implementation assessment informed the adaptation of the ClASS framework for assessing and strengthening technical and managerial capacities of health programs at three levels: international partner, local indigenous partner, and local partner treatment facility. The PCAT focus on organizational strengths and systems strengthening was retained and implemented in the ClASS framework and approach. A modular format was chosen to allow the use of administrative, fiscal and clinical modules in any combination and to insert new modules as needed by programs. The pilot led to refined pre-visit planning, informed review team composition, increased visit duration, and restructured modules. A web-based toolkit was developed to capture three years of experiential learning; this kit can also be used for independent implementation of the ClASS framework. A systematic adaptation process has produced a qualitative framework that can inform implementation strategies in support of country led HIV care and treatment programs. The framework, as a well-received iterative process focused on technical assistance, may have broader utility in other global programs.

United States Air Force Graduate Student Research Program. Program Technical rept. Volume 3

DTIC Science & Technology

1988-12-01

placing scalp electrodes in a bipolar arrangement. An additional problem we faced in the F4 study was time- loc ::ing the ERP to the eliciting...and Leo Jehl of OEHL for their help with halide and metal analysis that was invalubae to this project. John Barnaby, Will Robinson, Chris Ritter, and...a patient teacher of statistical methods. Dr Eric D. Grassman and Dr Leo Spaccavento explained many technical cardiological points and were generally

Evaluating the effectiveness of case method instruction in technical communication

NASA Technical Reports Server (NTRS)

Feinberg, S. G.

1981-01-01

The effectiveness of the case method as an instructional technique in improving technical writing was evaluated. The development of a self-report instrument that attempts to measure changes in attitude toward technical communication and the presentation results change are the purpose of this paper. Standards for developing a case set forth by Goldstein and Couture, were used to design an evaluation instrument to measure the effect instruction on student attitude toward technical communication. This self-report instrument is based on model developed and tested by Daly and Miller who studied writer attitude and apprehension toward writing. It was the most important objective of any evaluation is to provide information for improving the program.

Predictors of Learner Satisfaction and Transfer of Learning in a Corporate Online Education Program

ERIC Educational Resources Information Center

Gunawardena, Charlotte N.; Linder-VanBerschot, Jennifer A.; LaPointe, Deborah K.; Rao, Lalita

2010-01-01

This study explores factors that predict learner satisfaction and transfer of learning in an online educational program at a multinational corporation, established to improve organizational learning by providing training in technical skills. A mixed-methods design was used, selecting both quantitative methods (utilizing survey research) and…

Installation Restoration Program. Idaho Air National Guard, Gowen Field, Boise, Idaho, Site Inspection Report. Volume 2

DTIC Science & Technology

1989-03-21

Seattle.Washington 98108 (206)767-5060 Chemistr . Microbklog. and Technical Services 1. TO: Science Applications International Corporation LABORATORY I.D...Certificate 940 South HarneySt.. Seattle.Washington 98108 (206)767-5060 ) Chemistr . Micrcbiob .and Technical Services TO: Science Applications...HarnreySt Seattle.Washington 98108 (206)767-5060 Chemistr " Microbiocoy and Technical Services SAIC LABORATORY NO. 3894 APPENDIX A Method Blank

Technology in education: A guidebook for developing a science and math education support program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, C.L.

1992-09-01

Education is vital to survival and success in an increasingly technical world, and the quality of education is the responsibility of everyone students, teachers, parents, industry, and government. Any technical organization wanting to contribute to that success through its local education system can do so easily and effectively through careful planning. This report details that planning process and includes methods to (1) identify the interests, strengths, and resources of the technical organization; (2) identify the needs of the local education system; (3) interface with local school system administration, principals, and teachers; and (4) develop a unique plan to match themore » organization's strengths and resources with the needs of the school system. Following these getting started'' activities is the actual program that the Engineering Technology Division implemented in a local elementary school, including the curriculum, topics, and actual lesson plans used by technical personnel in the classroom. Finally, there are enrichment activities for teachers and students, suggestions for measuring the success of an education support program, and an overview of student responses to questions about the overall program.« less

Technology in education: A guidebook for developing a science and math education support program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, C.L.

1992-09-01

Education is vital to survival and success in an increasingly technical world, and the quality of education is the responsibility of everyone students, teachers, parents, industry, and government. Any technical organization wanting to contribute to that success through its local education system can do so easily and effectively through careful planning. This report details that planning process and includes methods to (1) identify the interests, strengths, and resources of the technical organization; (2) identify the needs of the local education system; (3) interface with local school system administration, principals, and teachers; and (4) develop a unique plan to match themore » organization`s strengths and resources with the needs of the school system. Following these ``getting started`` activities is the actual program that the Engineering Technology Division implemented in a local elementary school, including the curriculum, topics, and actual lesson plans used by technical personnel in the classroom. Finally, there are enrichment activities for teachers and students, suggestions for measuring the success of an education support program, and an overview of student responses to questions about the overall program.« less

Technical Assistance From State Health Departments for Communities Engaged in Policy, Systems, and Environmental Change: The ACHIEVE Program

PubMed Central

Hefelfinger, Jenny; Patty, Alice; Ussery, Ann

2013-01-01

Introduction This study assessed the value of technical assistance provided by state health department expert advisors and by the staff of the National Association of Chronic Disease Directors (NACDD) to community groups that participated in the Action Communities for Health, Innovation, and Environmental Change (ACHIEVE) Program, a CDC-funded health promotion program. Methods We analyzed quantitative and qualitative data reported by community project coordinators to assess the nature and value of technical assistance provided by expert advisors and NACDD staff and the usefulness of ACHIEVE resources in the development and implementation of community action plans. A grounded theory approach was used to analyze and categorize phrases in text data provided by community coordinators. Open coding placed conceptual labels on text phrases. Frequency distributions of the quantitative data are described and discussed. Results The most valuable technical assistance and program support resources were those determined to be in the interpersonal domain (ie, interactions with state expert advisors, NACDD staff, and peer-to-peer support). The most valuable technical assistance events were action institutes, coaches’ meetings, webinars, and technical assistance conference calls. Conclusion This analysis suggests that ACHIEVE communities valued the management and training assistance provided by expert advisors and NACDD staff. State health department expert advisors provided technical guidance and support, including such skills or knowledge-based services as best-practice strategies, review and discussion of community assessment data, sustainability planning, and identification of possible funding opportunities. NACDD staff led development and implementation of technical assistance events. PMID:24157078

A National Effort to Integrate Math and Science with CTE

ERIC Educational Resources Information Center

Hyslop, Alisha

2008-01-01

National activities focus on priority areas and are often designed to develop, improve and identify the most successful methods and techniques for providing career and technical education (CTE) programs under Perkins. One of these priority areas under the 2006 Perkins Act is the integration of academic and technical education. Since the early…

The Two-Semester Thesis Model: Emphasizing Research in Undergraduate Technical Communication Curricula

ERIC Educational Resources Information Center

Ford, Julie Dyke; Bracken, Jennifer L.; Wilson, Gregory D.

2009-01-01

This article addresses previous arguments that call for increased emphasis on research in technical communication programs. Focusing on the value of scholarly-based research at the undergraduate level, we present New Mexico Tech's thesis model as an example of helping students develop familiarity with research skills and methods. This two-semester…

Basic EMC Technology Advancement for C3 Systems - Model Revision for IEMCAP. Volume 5

DTIC Science & Technology

1984-10-01

important asset. 126 REFERENCES [1] J. L. Bogdanor , et. al., Inttasystem Electromagnetic Compatibility Analy- sis Program, Technical Report, RADC-TR-74...Method of Moments, Technical Report, RADC-TR-82-286, Vol. IV A, Rome Air Development Center, Griffiss AFB, NY, November 1982. [30] J. B. Bogdanor , M. D

Brokering Boundaries: Literacy Change Agents at Work

ERIC Educational Resources Information Center

VanDeusen-MacLeod, Elizabeth A.

2009-01-01

The purpose of this mixed-method descriptive case study is to investigate the role technical assistance providers within the context of one state's large-scale literacy grant program. This study provides an in-depth examination of one state's technical assistance providers known as Reading First Facilitators (RFF) through the study of a group of…

A study on technical efficiency of a DMU (review of literature)

NASA Astrophysics Data System (ADS)

Venkateswarlu, B.; Mahaboob, B.; Subbarami Reddy, C.; Sankar, J. Ravi

2017-11-01

In this research paper the concept of technical efficiency (due to Farell) [1] of a decision making unit (DMU) has been introduced and the measure of technical and cost efficiencies are derived. Timmer’s [2] deterministic approach to estimate the Cobb-Douglas production frontier has been proposed. The idea of extension of Timmer’s [2] method to any production frontier which is linear in parameters has been presented here. The estimation of parameters of Cobb-Douglas production frontier by linear programming approach has been discussed in this paper. Mark et al. [3] proposed a non-parametric method to assess efficiency. Nuti et al. [4] investigated the relationships among technical efficiency scores, weighted per capita cost and overall performance Gahe Zing Samuel Yank et al. [5] used Data envelopment analysis to assess technical assessment in banking sectors.

NECAP 4.1: NASA's energy-cost analysis program user's manual

NASA Technical Reports Server (NTRS)

Jensen, R. N.; Henninger, R. H.; Miner, D. L.

1983-01-01

The Enery Cost Analysis Program (NECAP) is a powerful computerized method to determine and to minimize building energy consumption. The program calculates hourly heat gain or losses taking into account the building thermal resistance and mass, using hourly weather and a "response factor' method. Internal temperatures are allowed to vary in accordance with thermostat settings and equipment capacity. A simplified input procedure and numerous other technical improvements are presented. This Users Manual describes the program and provides examples.

Understanding a technical language: A schema-based approach

NASA Technical Reports Server (NTRS)

Falzon, P.

1984-01-01

Workers in many job categories tend to develop technical languages, which are restricted subjects of natural language. A better knowledge of these retrictions provides guidelines for the design of the restricted languages of interactive systems. Accordingly, a technical language used by air-traffic controllers in their communications with pilots was studied. A method of analysis is presented that allows the schemata underlying each category of messages to be identified. This schematic knowledge was implemented in programs, which assume that the goal-oriented aspect of technical languages (and particularly the restricted domain of discourse) limits the processes and the data necessary in order to understand the messages (monosemy, limited vocabulary, evocation of the schemata by some command words, absence of syntax). The programs can interpret, and translate into sequences of action, the messages emitted by the controllers.

25 CFR 170.161 - What is the Indian Local Technical Assistance Program?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is the Indian Local Technical Assistance Program... Technical Assistance Program § 170.161 What is the Indian Local Technical Assistance Program? The Indian Local Technical Assistance Program (Indian LTAP) is authorized under 23 U.S.C. 504(b), and §§ 170.161...

Professional Development Policies and Programs.

ERIC Educational Resources Information Center

Department of the Interior, Washington, DC.

This memorandum sets forth policies, objectives, plans and programs for providing opportunities to professional staff for development of their technical and managerial skills. Section titles are: Policy and Objectives; Methods of Achieving Objectives; Cooperative Determination of Training Needs, Professional Development Plan; Agency Financial…

Training and Maintaining System-Wide Reliability in Outcome Management.

PubMed

Barwick, Melanie A; Urajnik, Diana J; Moore, Julia E

2014-01-01

The Child and Adolescent Functional Assessment Scale (CAFAS) is widely used for outcome management, for providing real time client and program level data, and the monitoring of evidence-based practices. Methods of reliability training and the assessment of rater drift are critical for service decision-making within organizations and systems of care. We assessed two approaches for CAFAS training: external technical assistance and internal technical assistance. To this end, we sampled 315 practitioners trained by external technical assistance approach from 2,344 Ontario practitioners who had achieved reliability on the CAFAS. To assess the internal technical assistance approach as a reliable alternative training method, 140 practitioners trained internally were selected from the same pool of certified raters. Reliabilities were high for both practitioners trained by external technical assistance and internal technical assistance approaches (.909-.995, .915-.997, respectively). 1 and 3-year estimates showed some drift on several scales. High and consistent reliabilities over time and training method has implications for CAFAS training of behavioral health care practitioners, and the maintenance of CAFAS as a global outcome management tool in systems of care.

Sediment Management Methods to Reduce Dredging: Part 2, Sediment Collector Technology

DTIC Science & Technology

2017-04-01

Approved for public release; distribution is unlimited. ERDC TN-DOER-T13 April 2017 Sediment Management Methods to Reduce Dredging: Part 2...DOER) Program technical note (TN) is the second in a series evaluating sediment management methods to reduce dredging through a research task (RT...in the DOER Program.1 This TN presents an evaluation of sediment collector technology, one promising new device that may help better manage

Guided Pathways to Careers: Four Dimensions of Structure in Community College Career-Technical Programs

ERIC Educational Resources Information Center

Van Noy, Michelle; Trimble, Madeline; Jenkins, Davis; Barnett, Elisabeth; Wachen, John

2016-01-01

Objective: Some have hypothesized that community college programs are not sufficiently structured to support student success and that students would benefit from more highly structured programs. This study examines the specific ways that structure is expressed in policy and practice at representative community colleges. Method: Using data obtained…

75 FR 13521 - Centers for Independent Living Program-Training and Technical Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-22

... DEPARTMENT OF EDUCATION Centers for Independent Living Program--Training and Technical Assistance... for Independent Living Program--Training and Technical Assistance (CIL-TA program). The Assistant... appropriated for the CIL program to provide training and technical assistance to CILs, agencies eligible to...

Methods and Models of the Hanford Internal Dosimetry Program, PNNL-MA-860

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carbaugh, Eugene H.; Bihl, Donald E.; Maclellan, Jay A.

2009-09-30

The Hanford Internal Dosimetry Program (HIDP) provides internal dosimetry support services for operations at the Hanford Site. The HIDP is staffed and managed by the Radiation and Health Technology group, within the Pacific Northwest National Laboratory (PNNL). Operations supported by the HIDP include research and development, the decontamination and decommissioning of facilities formerly used to produce and purify plutonium, and waste management activities. Radioelements of particular interest are plutonium, uranium, americium, tritium, and the fission and activation product radionuclides 137Cs, 90Sr, and 60Co. This manual describes the technical basis for the design of the routine bioassay monitoring program and formore » assessment of internal dose. The purposes of the manual are as follows: • Provide assurance that the HIDP derives from a sound technical base. • Promote the consistency and continuity of routine program activities. • Provide a historical record. • Serve as a technical reference for radiation protection personnel. • Aid in identifying and planning for future needs.« less

7 CFR Exhibit F to Subpart I of... - Site Option Loan to Technical Assistance Grantees

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGENCY, DEPARTMENT OF AGRICULTURE (CONTINUED) PROGRAM REGULATIONS (CONTINUED) HOUSING Self-Help Technical... will build their own homes by the self-help method. An SO loan will be considered only when sites... that will be needed as building sites by self-help families participating in the TA self-help housing...

How Do Professional Learning Communities Foster Strong Career and Technical Education Programs of Study in Illinois Public High Schools?

ERIC Educational Resources Information Center

Custable, Wendy

2013-01-01

This research study examines how Illinois public high school Career and Technical Education educational leaders employ best practices in providing all students rigorous, relevant, and equitable learning experiences within a professional learning community structure. This study utilized a mixed method two-tier case study methodology. Tier one…

Mathematics for the Technical Student: The Use of the Computer in the Systems Approach to Instruction.

ERIC Educational Resources Information Center

Capps, Joan P.

An instructional method using flow-chart symbols to make mathematical abstractions more concrete was implemented for a year in a technical mathematics course. Students received instruction in computer applications and programming in the BASIC language in order to increase motivation and firm the mathematical skills and problem-solving approaches…

Wisconsin Technical College System Board Equity Staff Development Workshops and Services--Phase IV. Final Report.

ERIC Educational Resources Information Center

Baldus, Lorayne

A staff development program on gender equity was conducted for personnel in Wisconsin's technical colleges using the train-the-trainer method. The training took two approaches: a class for college personnel and career challenge training for project directors of single parent and displaced homemaker grants. The inservice class resulted in increased…

76 FR 19360 - Office of the Assistant Secretary for Planning and Evaluation; Medicare Program; Meeting of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-07

... be very technical in nature and will focus on the actuarial and economic assumptions and methods by... discussion is expected to focus on highly technical aspects of estimation involving economics and actuarial science. Panelists are not restricted, however, in the topics that they choose to discuss. Procedure and...

Instructional Experiment of Practical Competencies-Oriented Teaching Materials in Technical Universities

ERIC Educational Resources Information Center

Chen, Su-Chang

2010-01-01

This study aims to conduct experimental instruction on the human resource management unit of business management in practical competencies-oriented business program developed by Chen (2005). This study is based on the quasi-experiment method and the subjects are two classes of students in a four-year technical university who have completed the…

The Technical Assistance Program: A Program Plan.

DTIC Science & Technology

1985-09-01

interests, talents, and hobbies of current employees who wish to become involved in the technical assistance program . 4. Capitalize on the corporate...Center San Diego, CA 92152 Telephone (619) 225-6281 B-33 TAP ( EMPLOYEE ) QUESTIONNAIRE - The Technical Assistance Program (TAP) links technically skilled...Brochure, "Retired Technologist" C-11 C. Sample Letter to NOSC Employees C-13 Brochure D. The Technical Assistance Program C-15 C-1

Contracting Officer's Technical Representatives

NASA Technical Reports Server (NTRS)

Brisbin, Steve

1997-01-01

The Breakout Session is a traditional conference instrument used by the NASA Occupational Health Program (OHP) as a method to convene people with common interests. Typically these sessions provide discussion of current topics of high priority and currency and allow multiple views and opinions to be shared and evaluated by all participants. Since the Contracting Officer's Technical Representatives (COTRs) occupy the technical focus of support contract management, this particular group, attended by 20 representatives, addressed issues and topics at the forefront of operational concerns.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Heinrich, R.R.; Jensen, K.J.

The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of technical support services to the scientific and engineering programs at ANL. In addition, ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems, from routine standard analyses to unique problems that require significant development of methods and techniques. The purpose of this report is to summarize the technical and administrative activities of the Analytical Chemistry Laboratory (ACL) atmore » Argonne National Laboratory (ANL) for Fiscal Year 1985 (October 1984 through September 1985). This is the second annual report for the ACL. 4 figs., 1 tab.« less

The Philosopher's Stone: How Basic Skills Programs Fare in Troubled Financial Times

ERIC Educational Resources Information Center

Ray, Thomas P.

2012-01-01

This mixed methods study examined the relative position of basic skills programs with transfer and career technical programs in a large suburban community college in California during the three-year period of budget reductions from 2009-2010 through 2011-2012. The budget line dedicated to part-time or non-contract instruction was analyzed along…

Evaluation of methods for determining hardware projected life

NASA Technical Reports Server (NTRS)

1971-01-01

An investigation of existing methods of predicting hardware life is summarized by reviewing programs having long life requirements, current research efforts on long life problems, and technical papers reporting work on life predicting techniques. The results indicate that there are no accurate quantitative means to predict hardware life for system level hardware. The effectiveness of test programs and the cause of hardware failures is considered.

What You Should Get from a Professionally Oriented Master's Degree Program in Technical Communication.

ERIC Educational Resources Information Center

Carliner, Saul

1992-01-01

Cites reasons for pursuing a curriculum in technical communication, lists objectives a program should achieve, and outlines a four-part program that includes theory, professional skills, technical proficiency, and an internship. Lists schools offering programs in technical communication. (SR)

Program objectives for the National Water Data Exchange (NAWDEX) for fiscal year 1979

USGS Publications Warehouse

Edwards, Melvin D.

1978-01-01

This report describes the program objectives of the National Water Data Exchange (NAWDEX) for Fiscal Year 1979. These objectives include NAWDEX membership, program administration, management, and coordination, NAWDEX services, identification of sources of water data, indexing of water data, programs and systems documentation, recommended methods for the handling and exchange of water data, training, and technical assistance to NAWDEX members. (Woodard-USGS)

Pilot Study of the Effects of Supraliminal Bipolar Primes on Occupational Educators' Viewing Time and Perceived Confidence with Desktop Virtual Reality

ERIC Educational Resources Information Center

Williams, M. Scott

2008-01-01

Virtual reality (VR) has been demonstrated to offer learning benefits over traditional instructional methods in many technical and occupational areas. However, in the framework of Rogers' innovation diffusion theory, adoption of VR in Career and Technical Education and occupational programs appears to be lagging. This study used experimental…

Energy Conservation: A Management Report for State and Local Governments and A Technical Guide for State and Local Governments.

ERIC Educational Resources Information Center

Public Technology, Inc., Washington, DC.

This technical guide is part of a packet of tools designed to assist state or local government practitioners in organizing and managing an energy conservation program. It gives information on adapting energy conservation methods to existing public buildings and on designing new public buildings with energy conservation in mind. It also discusses…

The Teaching of User Studies as a Subject for the Preparation of Librarians, Documentalists, Archivists and Other Information Specialists.

ERIC Educational Resources Information Center

Sene, H.

This working paper focuses on methods for developing a study program on scientific and technical information users that could serve as a subject of study in the academic preparation of librarians, archivists, and scientific and technical information specialists. Recognizing that in most schools for training specialists of scientific and technical…

78 FR 13030 - Applications for New Awards; Native American Career and Technical Education Program (NACTEP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... DEPARTMENT OF EDUCATION Applications for New Awards; Native American Career and Technical...: Notice. Overview Information: Native American Career and Technical Education Program (NACTEP). Notice... Purpose of Program: The Native American Career and Technical Education Program (NACTEP) provides grants to...

Cost Benefit Studies. Final Report.

ERIC Educational Resources Information Center

Weiner, Arthur; Marson, Arthur A.

This document applies Dr. Mehar Aurora's method for conducting cost benefit studies to the Food Manufacturing Technology-Dairy and the Food Manufacturing Technology-Canning and Freezing programs offered by the Moraine Park Technical Institute. Costs to individual students enrolled in the programs include tuition, fees, housing, travel, books,…

Survey of engineering computational methods and experimental programs for estimating supersonic missile aerodynamic characteristics

NASA Technical Reports Server (NTRS)

Sawyer, W. C.; Allen, J. M.; Hernandez, G.; Dillenius, M. F. E.; Hemsch, M. J.

1982-01-01

This paper presents a survey of engineering computational methods and experimental programs used for estimating the aerodynamic characteristics of missile configurations. Emphasis is placed on those methods which are suitable for preliminary design of conventional and advanced concepts. An analysis of the technical approaches of the various methods is made in order to assess their suitability to estimate longitudinal and/or lateral-directional characteristics for different classes of missile configurations. Some comparisons between the predicted characteristics and experimental data are presented. These comparisons are made for a large variation in flow conditions and model attitude parameters. The paper also presents known experimental research programs developed for the specific purpose of validating analytical methods and extending the capability of data-base programs.

75 FR 29732 - Career and Technical Education Program-Promoting Rigorous Career and Technical Education Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-27

... DEPARTMENT OF EDUCATION Career and Technical Education Program--Promoting Rigorous Career and Technical Education Programs of Study Catalog of Federal Domestic Assistance (CFDA) Number: 84.051C. AGENCY: Office of Vocational and Adult Education, Department of Education. ACTION: Notice of proposed priorities...

76 FR 74804 - Federal Housing Administration (FHA) First Look Sales Method Under the Neighborhood Stabilization...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-01

... participate in the First Look Sales Method. This notice announces the availability of a universal NAID to aid... universal NAID to aid eligible NSP purchasers in the purchase of properties under First Look Sales Method... Administration (FHA) First Look Sales Method Under the Neighborhood Stabilization Programs (NSP) Technical...

Program budgeting and marginal analysis: a case study in chronic airflow limitation.

PubMed

Crockett, A; Cranston, J; Moss, J; Scown, P; Mooney, G; Alpers, J

1999-01-01

Program budgeting and marginal analysis is a method of priority-setting in health care. This article describes how this method was applied to the management of a disease-specific group, chronic airflow limitation. A sub-program flow chart clarified the major cost drivers. After assessment of the technical efficiency of the sub-programs and careful and detailed analysis, incremental and decremental wish lists of activities were established. Program budgeting and marginal analysis provides a framework for rational resource allocation. The nurturing of a vigorous program management group, with members representing all participants in the process (including patients/consumers), is the key to a successful outcome.

The Culture Assimilator: An Approach to Cross-Cultural Training. Technical Report.

ERIC Educational Resources Information Center

Fiedler, Fred E.; And Others

The construction of self-administered, programed, culture training manuals, called "Culture Assimilators," is described here. These programs provide an apparently effective method for assisting members of one culture to interact and adjust successfully with members of another culture. Culture assimilators have been constructed for the…

Building Staff Competencies and Selecting Communications Methods for Waste Management Programs.

ERIC Educational Resources Information Center

Richardson, John G.

The Waste Management Institute provided in-service training to interested County Extension agents in North Carolina to enable them to provide leadership in developing and delivering a comprehensive county-level waste management program. Training included technical, economic, environmental, social, and legal aspects of waste management presented in…

Did Learning Mathematics Online Increase Students' Math Proficiency?: An Outcome Study of a Vocational High School's Use of an Online Mathematics Program

ERIC Educational Resources Information Center

Paadre, Taimi H.

2011-01-01

This mixed methods outcomes study investigated a summer school mathematics program for all incoming 9th grade students at a suburban New England vocational technical high school. Qualitative data was gathered via survey and interview from administration, faculty, and students involved with the newly introduced online learning program.…

Seven Key Principles of Program and Project Success: A Best Practices Survey

NASA Technical Reports Server (NTRS)

Bilardo, Vincent J.; Korte, John J.; Dankhoff, Walter; Langan, Kevin; Branscome, Darrell R.; Fragola, Joseph R.; Dugal, Dale J.; Gormley, Thomas J.; Hammond, Walter E.; Hollopeter, James J.;

Vocational Curriculum Modification. Teaching Technical Language to Learning Handicapped Students. Project HIRE: A Curriculum Management System for Instructing the Handicapped. Final Report, Volume 1.

ERIC Educational Resources Information Center

Gardner, David C.; And Others

Volume 1 of the final report on Project HIRE reports the design, development, field-testing, and refining of self-instructional packages to teach entry level technical vocabulary to learning handicapped students mainstreamed in vocational programs. Volume 2, a management handbook, reports the methods and findings concerning development of…

U.S. Geological Survey experience with the residual absolutes method

NASA Astrophysics Data System (ADS)

Worthington, E. William; Matzka, Jürgen

2017-10-01

The U.S. Geological Survey (USGS) Geomagnetism Program has developed and tested the residual method of absolutes, with the assistance of the Danish Technical University's (DTU) Geomagnetism Program. Three years of testing were performed at College Magnetic Observatory (CMO), Fairbanks, Alaska, to compare the residual method with the null method. Results show that the two methods compare very well with each other and both sets of baseline data were used to process the 2015 definitive data. The residual method will be implemented at the other USGS high-latitude geomagnetic observatories in the summer of 2017 and 2018.

A Government/Industry Summary of the Design Analysis Methods for Vibrations (DAMVIBS) Program

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G. (Compiler)

1993-01-01

The NASA Langley Research Center in 1984 initiated a rotorcraft structural dynamics program, designated DAMVIBS (Design Analysis Methods for VIBrationS), with the objective of establishing the technology base needed by the rotorcraft industry for developing an advanced finite-element-based dynamics design analysis capability for vibrations. An assessment of the program showed that the DAMVIBS Program has resulted in notable technical achievements and major changes in industrial design practice, all of which have significantly advanced the industry's capability to use and rely on finite-element-based dynamics analyses during the design process.

Spectrum Orbit Utilization Program documentation: SOUP5 version 3.8 user's manual, volume 1, chapters 1 through 5

NASA Technical Reports Server (NTRS)

Davidson, J.; Ottey, H. R.; Sawitz, P.; Zusman, F. S.

1985-01-01

The underlying engineering and mathematical models as well as the computational methods used by the Spectrum Orbit Utilization Program 5 (SOUP5) analysis programs are described. Included are the algorithms used to calculate the technical parameters, and references to the technical literature. The organization, capabilities, processing sequences, and processing and data options of the SOUP5 system are described. The details of the geometric calculations are given. Also discussed are the various antenna gain algorithms; rain attenuation and depolarization calculations; calculations of transmitter power and received power flux density; channelization options, interference categories, and protection ratio calculation; generation of aggregrate interference and margins; equivalent gain calculations; and how to enter a protection ratio template.

Development of NASA Technical Standards Program Relative to Enhancing Engineering Capabilities

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2003-01-01

The enhancement of engineering capabilities is an important aspect of any organization; especially those engaged in aerospace development activities. Technical Standards are one of the key elements of this endeavor. The NASA Technical Standards Program was formed in 1997 in response to the NASA Administrator s directive to develop an Agencywide Technical Standards Program. The Program s principal objective involved the converting Center-unique technical standards into Agency wide standards and the adoption/endorsement of non-Government technical standards in lieu of government standards. In the process of these actions, the potential for further enhancement of the Agency s engineering capabilities was noted relative to value of being able to access Agencywide the necessary full-text technical standards, standards update notifications, and integration of lessons learned with technical standards, all available to the user from one Website. This was accomplished and is now being enhanced based on feedbacks from the Agency's engineering staff and supporting contractors. This paper addresses the development experiences with the NASA Technical Standards Program and the enhancement of the Agency's engineering capabilities provided by the Program s products. Metrics are provided on significant aspects of the Program.

7 CFR 226.22 - Procurement standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... pertinent to the following: rationale for the method of procurement, selection of contract type, contractor... competition. The description may include a statement of the qualitative nature of the material, product or... technical resources. (i) Program procurements shall be made by one of the following methods: (1) Small...

Cost effective nuclear commercial grade dedication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maletz, J.J.; Marston, M.J.

1991-01-01

This paper describes a new computerized database method to create/edit/view specification technical data sheets (mini-specifications) for procurement of spare parts for nuclear facility maintenance and to develop information that could support possible future facility life extension efforts. This method may reduce cost when compared with current manual methods. The use of standardized technical data sheets (mini-specifications) for items of the same category improves efficiency. This method can be used for a variety of tasks, including: Nuclear safety-related procurement; Non-safety related procurement; Commercial grade item procurement/dedication; Evaluation of replacement items. This program will assist the nuclear facility in upgrading its procurementmore » activities consistent with the recent NUMARC Procurement Initiative. Proper utilization of the program will assist the user in assuring that the procured items are correct for the applications, provide data to assist in detecting fraudulent materials, minimize human error in withdrawing database information, improve data retrievability, improve traceability, and reduce long-term procurement costs.« less

10 CFR 455.122 - Applicant certifications for State grants for technical assistance, program assistance, and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... assistance, program assistance, and marketing. 455.122 Section 455.122 Energy DEPARTMENT OF ENERGY ENERGY... for State grants for technical assistance, program assistance, and marketing. Applications from States for financial assistance for technical assistance programs, program assistance, and marketing shall...

13 CFR 124.701 - What is the purpose of the 7(j) management and technical assistance program?

Code of Federal Regulations, 2010 CFR

2010-01-01

...) management and technical assistance program? 124.701 Section 124.701 Business Credit and Assistance SMALL...) Business Development Management and Technical Assistance Program § 124.701 What is the purpose of the 7(j) management and technical assistance program? Section 7(j)(1) of the Small Business Act, 15 U.S.C. 636(j)(1...

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

SPSS and SAS programming for the testing of mediation models.

PubMed

Dudley, William N; Benuzillo, Jose G; Carrico, Mineh S

2004-01-01

Mediation modeling can explain the nature of the relation among three or more variables. In addition, it can be used to show how a variable mediates the relation between levels of intervention and outcome. The Sobel test, developed in 1990, provides a statistical method for determining the influence of a mediator on an intervention or outcome. Although interactive Web-based and stand-alone methods exist for computing the Sobel test, SPSS and SAS programs that automatically run the required regression analyses and computations increase the accessibility of mediation modeling to nursing researchers. To illustrate the utility of the Sobel test and to make this programming available to the Nursing Research audience in both SAS and SPSS. The history, logic, and technical aspects of mediation testing are introduced. The syntax files sobel.sps and sobel.sas, created to automate the computation of the regression analysis and test statistic, are available from the corresponding author. The reported programming allows the user to complete mediation testing with the user's own data in a single-step fashion. A technical manual included with the programming provides instruction on program use and interpretation of the output. Mediation modeling is a useful tool for describing the relation between three or more variables. Programming and manuals for using this model are made available.

Forum on Workforce Development

NASA Technical Reports Server (NTRS)

Hoffman, Edward

2010-01-01

APPEL Mission: To support NASA's mission by promoting individual, team, and organizational excellence in program/project management and engineering through the application of learning strategies, methods, models, and tools. Goals: a) Provide a common frame of reference for NASA s technical workforce. b) Provide and enhance critical job skills. c) Support engineering, program and project teams. d) Promote organizational learning across the agency. e) Supplement formal educational programs.

Empirical Network Model of Human Higher Cognitive Brain Functions

DTIC Science & Technology

1990-03-31

If applicable) AFOSR j’ F49620-87-0047 8c. ADDRESS (City, State, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS USAF/AFSC, AIR FORCE OFFICE OF PROGRAM ...8217 Workbench", an interactive exploratory data analysis and display program . Other technical developments include development of methods and programs ...feedback. Electroencephalogr. clin. Neurophysiol., 74:147-160. 11. Illes, J. (1989) Neurolinguistic features of spontaneous language production

A Common Programming Language for the Department of Defense--Background and Technical Requirements

DTIC Science & Technology

1976-06-01

Method Findings I. Introduction A. The Problem 1. Software Costs 2. Programming Language 3. Lack of Comrr.onality 4. Common Language 5...accessible soft- ware tools and aids. There are a number of widely held perceptions about the ill effects of the lack of programming language ...cost- effective (at lea~t during development) than de- velopi~g a new programming language specialized to the project. On the other hand,

Development of a Model for Some Aspects of University Policy. Technical Report.

ERIC Educational Resources Information Center

Goossens, J. L. M.; And Others

A method to calculate the need for academic staff per faculty, based on educational programs and numbers of students, is described which is based on quantitative relations between programs, student enrollment, and total budget. The model is described schematically and presented in a mathematical form adapted to computer processing. Its application…

College Choice and Student Selection of an Information-Technology Degree Program

ERIC Educational Resources Information Center

Severson, Christopher S.

2017-01-01

This mixed-methods study analyzed data from 906 Ruffalo Noel Levitz Student Satisfaction Surveys (RNLSSS) at a two-year technical college in Wisconsin, to determine influences on participants' choices of programs in information technology (IT). Quantitative results showed that none of eight variables (i.e., cost, financial assistance, academic…

Promoting Probabilistic Programming System (PPS) Development in Probabilistic Programming for Advancing Machine Learning (PPAML)

DTIC Science & Technology

2018-03-01

MARCH 2018 FINAL TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED STINFO COPY AIR FORCE RESEARCH LABORATORY INFORMATION...SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) Air Force Research Laboratory/RITA DARPA 525 Brooks Road 675 North Randolph Street Rome...1 3.0 METHODS , ASSUMPTIONS, AND PROCEDURES

Description of the KEEP Reading Curriculum, 1975-76. Technical Report No. 43.

ERIC Educational Resources Information Center

Au, Kathryn H.

The Kamehameha Early Education Program (KEEP) is a research and development program designed to develop, demonstrate, and disseminate methods for improving the education of Hawaiian and part-Hawaiian children; this report contains a description of the reading curriculum used in the KEEP demonstration school during the 1975-76 school year. The…

DOE standard: The Department of Energy Laboratory Accreditation Program for radiobioassay

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-01

This technical standard describes the US Department of Energy Laboratory Accreditation Program (DOELAP) for Radiobioassay, for use by the US Department of Energy (DOE) and DOE Contractor radiobioassay programs. This standard is intended to be used in conjunction with the general administrative technical standard that describes the overall DOELAP accreditation process--DOE-STD-1111-98, Department of Energy Laboratory Accreditation Program Administration. This technical standard pertains to radiobioassay service laboratories that provide either direct or indirect (in vivo or in vitro) radiobioassay measurements in support of internal dosimetry programs at DOE facilities or for DOE and DOE contractors. Similar technical standards have been developedmore » for other DOELAP dosimetry programs. This program consists of providing an accreditation to DOE radiobioassay programs based on successful completion of a performance-testing process and an on-site evaluation by technical experts. This standard describes the technical requirements and processes specific to the DOELAP Radiobioassay Accreditation Program as required by 10 CFR 835 and as specified generically in DOE-STD-1111-98.« less

76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

7 CFR 277.14 - Procurement standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... qualitative nature of the material, product or service desired and, when necessary, shall set forth those... technical resources. (g) Procurement methods. State agency procurements made in whole or in part with program funds shall be by one of the following methods: (1) Small purchase procedures are those relatively...

The Secretary's Awards for Outstanding Vocational-Technical Education Programs. 1995.

ERIC Educational Resources Information Center

Office of Vocational and Adult Education (ED), Washington, DC.

This publication describes the 12 winning programs and the 9 semifinalists of the 1995 U.S. Secretary of Education's Awards for Outstanding Vocational-Technical Education Programs. The awards program was established in 1981 to recognize excellence in local school-to-work and vocational-technical education programs, services, and activities that…

Reach Up for Math.

ERIC Educational Resources Information Center

Seguin, Barbara Rehmann

1984-01-01

The Suggestive Accelerative Learning and Teaching method uses music, group discussion, physical exercise, and relaxation techniques to reduce math anxiety in adult basic education students who want to enter vocational programs at Blackhawk Technical Institute (Wisconsin). (SK)

75 FR 29366 - ``Homeless Veterans' Reintegration Program (HVRP) National Technical Assistance Center...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-25

... ``Homeless Veterans' Reintegration Program (HVRP) National Technical Assistance Center Cooperative Agreement...). Section 2021 authorizes programs to expedite the reintegration of homeless Veterans into the labor force... Technical Assistance Center (NTAC) for the Homeless Veterans' Reintegration Program (HVRP) to include the...

NECAP 4.1: NASA's Energy-Cost Analysis Program fast input manual and example

NASA Technical Reports Server (NTRS)

Jensen, R. N.; Miner, D. L.

1982-01-01

NASA's Energy-Cost Analysis Program (NECAP) is a powerful computerized method to determine and to minimize building energy consumption. The program calculates hourly heat gain or losses taking into account the building thermal resistance and mass, using hourly weather and a response factor method. Internal temperatures are allowed to vary in accordance with thermostat settings and equipment capacity. NECAP 4.1 has a simplified input procedure and numerous other technical improvements. A very short input method is provided. It is limited to a single zone building. The user must still describe the building's outside geometry and select the type of system to be used.

Indexing NASA programs for technology transfer methods development and feasibility

NASA Technical Reports Server (NTRS)

Clingman, W. H.

1972-01-01

This project was undertaken to evaluate the application of a previously developed indexing methodology to ongoing NASA programs. These programs are comprehended by the NASA Program Approval Documents (PADS). Each PAD contains a technical plan for the area it covers. It was proposed that these could be used to generate an index to the complete NASA program. To test this hypothesis two PADS were selected by the NASA Technology Utilization Office for trial indexing. Twenty-five individuals indexed the two PADS using NASA Thesaurus terms. The results demonstrated the feasibility of indexing ongoing NASA programs using PADS as the source of information. The same indexing methodology could be applied to other documents containing a brief description of the technical plan. Results of this project showed that over 85% of the concepts in the technology should be covered by the indexing. Also over 85% of the descriptors chosen would be accurate. This completeness and accuracy for the indexing is considered satisfactory for application in technology transfer.

78 FR 25292 - Announcement of Funding Awards; Office of Native American Programs Training and Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-30

... Awards; Office of Native American Programs Training and Technical Assistance; Fiscal Year 2012 AGENCY... (NOFA) for the Office of Native American Programs Training and Technical Assistance (ONAP T&TA). This... nonprofit organizations, as well as for-profit entities to provide Training & Technical Assistance to the...

Low Cost Technical Solutions to Jump Start an Insider Threat Program

DTIC Science & Technology

2016-05-11

Low Cost Technical Solutions to Jump Start an Insider Threat Program George J. Silowash Derrick L. Spooner Daniel L. Costa Michael J...Albrethsen May 2016 TECHNICAL NOTE CMU/SEI-2016-TN-004 CERT Division http://www.sei.cmu.edu Copyright 2016 Carnegie Mellon University This... technical note will explore tools that may be suitable for satisfying the basic technical needs of an insider threat program, giving organizations a

Owning the program technical baseline for future space systems acquisition: program technical baseline tracking tool

NASA Astrophysics Data System (ADS)

Nguyen, Tien M.; Guillen, Andy T.; Hant, James J.; Kizer, Justin R.; Min, Inki A.; Siedlak, Dennis J. L.; Yoh, James

2017-05-01

The U.S. Air Force (USAF) has recognized the needs for owning the program and technical knowledge within the Air Force concerning the systems being acquired to ensure success. This paper extends the previous work done by the authors [1-2] on the "Resilient Program Technical Baseline Framework for Future Space Systems" and "Portfolio Decision Support Tool (PDST)" to the development and implementation of the Program and Technical Baseline (PTB) Tracking Tool (PTBTL) for the DOD acquisition life cycle. The paper describes the "simplified" PTB tracking model with a focus on the preaward phases and discusses how to implement this model in PDST.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

Typography and layout of technical reports - Survey of current practices

NASA Technical Reports Server (NTRS)

Pinelli, T. E.; Cordle, V. M.; Mccullough, R.

1985-01-01

As part of a review of the NASA Langley Research Center scientific and technical information program, 50 technical reports from industry, research institutions, and government agencies were systematically examined and analyzed to determine current usage and practice in regard to (1) typography, including composition method, type style, type size, and margin treatment; (2) graphic design, including layout and imposition of material on the page; and (3) physical media, including paper, ink, and binding methods. The results indicate that approximately 50 percent of the reports were typeset, 70 percent used Roman (serif) type, 80 percent used 10- or 11-point type for text, 60 percent used a ragged right-hand margin, slightly more than half used paragraph indentation, 75 percent used a single-column layout, 65 percent had one or more figures or tables placed perpendicular to (not aligned with) the text, and perfect binding was the most frequently used binding method.

Middlesex Community College Software Technical Writing Program.

ERIC Educational Resources Information Center

Middlesex Community Coll., Bedford, MA.

This document describes the Software Technical Writing Program at Middlesex Community College (Massachusetts). The program is a "hands-on" course designed to develop job-related skills in three major areas: technical writing, software, and professional skills. The program was originally designed in cooperation with the Massachusetts High…

U.S. Geological Survey experience with the residual absolutes method

USGS Publications Warehouse

Worthington, E. William; Matzka, Jurgen

2017-01-01

The U.S. Geological Survey (USGS) Geomagnetism Program has developed and tested the residual method of absolutes, with the assistance of the Danish Technical University's (DTU) Geomagnetism Program. Three years of testing were performed at College Magnetic Observatory (CMO), Fairbanks, Alaska, to compare the residual method with the null method. Results show that the two methods compare very well with each other and both sets of baseline data were used to process the 2015 definitive data. The residual method will be implemented at the other USGS high-latitude geomagnetic observatories in the summer of 2017 and 2018.

Research and Development Project Summaries, October 1991

DTIC Science & Technology

1991-10-01

delivery methods, training cost reduction, demonstration of technology’ effectiveness, and the reduction of acquisition risk . The majority of the work...demonstrations, risk reduction developments, and cost-effectiveness investigations in simulator and training technologzv. This advanced development program is a...systems. The program is organized around specific demonstration tasks that target critical technical risks that confront future weapons system

76 FR 10591 - Notice of Availability; Recommended Use of Body Weight3∕4 as the Default Method in Derivation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-25

... an Agency-wide guidance development program by a technical panel of the U.S. EPA's Risk Assessment... be available for inspection at EPA headquarters and regional libraries, through the U.S. Government Depository Library program. FOR FURTHER INFORMATION CONTACT: Dr. Michael W. Broder, Risk Assessment Forum...

Optimal design of a combustion chamber of gas turbine engine by a Combustion chamber 1D-2D computer program

NASA Astrophysics Data System (ADS)

Aleksandrov, Y. B.; Mingazov, B. G.

2017-09-01

The paper shows a method of modeling and optimization of processes in combustion chambers of gas turbine engines using a computer program developed by a team at the Department of Jet Engines and Power Plants (DJEPP) of Technical University named after A N Tupolev KNRTU-KAI.

Getting Beyond Technical Rationality in Developing Health Behavior Programs With Youth

ERIC Educational Resources Information Center

Perry, Cheryl L.

2004-01-01

Objective: To explore 2 major components of health behavior research, etiologic research and action research. To argue that action research is both an artistic as well as scientific process. Methods: Review of the development process of effective health behavior programs with youth. Review of literature on art as part of the scientific process,…

A Proposal to Build an Education Research and Development Program: The Kamehameha Early Education Project Proposal. Technical Report #3.

ERIC Educational Resources Information Center

Gallimore, Ronald; And Others

This report summarizes the programmatic features of a proposal for the Kamehameha Early Education Project (KEEP), a program aimed at the development, demonstration, and dissemination of methods for improving the education of Hawaiian and part-Hawaiian children. A brief description of the proposed project goals, structure, organization, and…

Guidelines for Establishing and Evaluating High School Technical Electromechanics Programs.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Technical and Adult Education.

Educators and industrial representatives developed these guidelines for school officials, instructors in technical education, and program and facility planners to use in planning a high school program in technical electromechanics. Designed to train students for entry into industry in applied electromechanics, the program includes electricity,…

Technical Preparation: Preparing Students for Success. A Position Paper Presented by the Wisconsin Association of Secondary Vocational Administrators 1991-1992.

ERIC Educational Resources Information Center

Peterson, Charlene; And Others

Technical Preparation (Tech Prep) programs include basic skills and competencies to improve students' school-to-work transition. The following elements characterize Tech Prep: designed for grades 9-14, leading to an technical associate degree; parallels college preparatory program; offers technical program of study in business enterprise,…

A Study of the Characteristics of Students, Teachers, and the Curriculum of Industrial-Technical Education in the Public Community Junior Colleges of Michigan.

ERIC Educational Resources Information Center

Larson, Milton Erving

Observations were made on the characteristics of students, teachers, and curricula of the industrial-technical programs of Michigan junior colleges. Of the 138 teachers, 75 were employed by five colleges, 50% had a master's degree, many had a BA in industrial arts, 65% had up to 12 semester hours in teaching methods, the median for subject matter…

Leveraging Independent Management and Chief Engineer Hierarchy: Vertically and Horizontally-Derived Technical Authority Value

NASA Technical Reports Server (NTRS)

Barley, Bryan; Newhouse, Marilyn

2012-01-01

In the development of complex spacecraft missions, project management authority is usually extended hierarchically from NASA's highest agency levels down to the implementing institution's project team level, through both the center and the program. In parallel with management authority, NASA utilizes a complementary, but independent, hierarchy of technical authority (TA) that extends from the agency level to the project, again, through both the center and the program. The chief engineers (CEs) who serve in this technical authority capacity oversee and report on the technical status and ensure sound engineering practices, controls, and management of the projects and programs. At the lowest level, implementing institutions assign project CEs to technically engage projects, lead development teams, and ensure sound technical principles, processes, and issue resolution. At the middle level, programs and centers independently use CEs to ensure the technical success of their projects and programs. At the agency level, NASA's mission directorate CEs maintain technical cognizance over every program and project in their directorate and advise directorate management on the technical, cost, schedule, and programmatic health of each. As part of this vertically-extended CE team, a program level CE manages a continually varying balance between penetration depth and breadth across his or her assigned missions. Teamwork issues and information integration become critical for management at all levels to ensure value-added use of both the synergy available between CEs at the various agency levels, and the independence of the technical authority at each organization.

Defense Technical Information Center (DTIC) - Its role in the USAF Scientific and Technical Information Program

NASA Technical Reports Server (NTRS)

Kuhn, Allan D.

1991-01-01

The Defense Technical Information Center (DTIC), the central repository for DOD scientific and technical information concerning studies and research and engineering efforts, is discussed. The present makeup of DTIC is described and its functions in producing technical reports and technical report bibliographies are examined. DTIC's outreach services are reviewed, as are its DTIC information and technology transfer programs. DTIC's plans for the year 2000 and its relation to the mission of the U.S. Air Force, including the Air Force's STINFO program, are addressed.

Influence of typical faults over the dynamic behavior of pantograph-catenary contact force in electric rail transport

NASA Astrophysics Data System (ADS)

Rusu-Anghel, S.; Ene, A.

2017-05-01

The quality of electric energy capture and also the equipment operational safety depend essentially of the technical state of the contact line (CL). The present method for determining the technical state of CL based on advance programming is no longer efficient, due to the faults which can occur into the not programmed areas. Therefore, they cannot be remediated. It is expected another management method for the repairing and maintenance of CL based on its real state which must be very well known. In this paper a new method for determining the faults in CL is described. It is based on the analysis of the variation of pantograph-CL contact force in dynamical regime. Using mathematical modelling and also experimental tests, it was established that each type of fault is able to generate ‘signatures’ into the contact force diagram. The identification of these signatures can be accomplished by an informatics system which will provide the fault location, its type and also in the future, the probable evolution of the CL technical state. The measuring of the contact force is realized in optical manner using a railway inspection trolley which has appropriate equipment. The analysis of the desired parameters can be accomplished in real time by a data acquisition system, based on dedicated software.

77 FR 37710 - Notice of Proposed Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

... to continue the collection of information for two technical training program course effectiveness... approval. This collection is for OSM's Technical Training Program Course Effectiveness Evaluations (1029... collection activity: Title: Technical Training Program Course Effectiveness Evaluation. OMB Control Number...

Detection of incipient defects in cables by partial discharge signal analysis

NASA Astrophysics Data System (ADS)

Martzloff, F. D.; Simmon, E.; Steiner, J. P.; Vanbrunt, R. J.

1992-07-01

As one of the objectives of a program aimed at assessing test methods for in-situ detection of incipient defects in cables due to aging, a laboratory test system was implemented to demonstrate that the partial discharge analysis method can be successfully applied to low-voltage cables. Previous investigations generally involved cables rated 5 kV or higher, while the objective of the program focused on the lower voltages associated with the safety systems of nuclear power plants. The defect detection system implemented for the project was based on commercially available signal analysis hardware and software packages, customized for the specific purposes of the project. The test specimens included several cables of the type found in nuclear power plants, including artificial defects introduced at various points of the cable. The results indicate that indeed, partial discharge analysis is capable of detecting incipient defects in low-voltage cables. There are, however, some limitations of technical and non-technical nature that need further exploration before this method can be accepted in the industry.

NOAAPORT User's Page

Science.gov Websites

Update History NOAAPORT Technical Contacts NOAAPORT Program Overview NOAAPORT Reference Documentation NOAAPORT Update History - for the NOAAPORT Program. NOAAPORT Technical Contacts - NWS Technical Points of Alignment Information. Receiver Characteristics - Technical Characteristics of the NOAAPORT Receiver. Data

76 FR 558 - Office of the Assistant Secretary for Planning and Evaluation; Medicare Program; Meeting of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

... technical aspects of estimation involving economics and actuarial science. Panelists are not restricted... actuarial and economic assumptions and methods by which Trustees might more accurately measure health...

Hamiltonian methods: BRST, BFV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garcia, J. Antonio

2006-09-25

The range of applicability of Hamiltonian methods to gauge theories is very diverse and cover areas of research from phenomenology to mathematical physics. We review some of the areas developed in Mexico in the last decades. They cover the study of symplectic methods, BRST-BFV and BV approaches, Klauder projector program, and non perturbative technics used in the study of bound states in relativistic field theories.

Hamiltonian methods: BRST, BFV

NASA Astrophysics Data System (ADS)

García, J. Antonio

2006-09-01

The range of applicability of Hamiltonian methods to gauge theories is very diverse and cover areas of research from phenomenology to mathematical physics. We review some of the areas developed in México in the last decades. They cover the study of symplectic methods, BRST-BFV and BV approaches, Klauder projector program, and non perturbative technics used in the study of bound states in relativistic field theories.

30 years of ergonomics at 3M: a case study.

PubMed

Larson, N; Wick, H

2012-01-01

The added value of the Ergonomics Program at 3M was found to be improved employee safety, compliance with regulations and reduction of work-related illness, increases in productivity, and quality and operating efficiency. This paper describes the thirty years of existence of this program. For the first twenty years, the program objectives were to: respond to requests for assistance related to work-related musculoskeletal disorder (WMSD) concerns, raise employee awareness of MSDs and ergonomics; educate engineers in ergonomics design; and develop ergonomics teams at manufacturing locations. Since the year 2000, 3M's Ergonomics Program has been in transition from a US-centric and corporate-based technical-expertled program to a global program applying participatory ergonomics strategies within a macroergonomics framework. During that transition, the existing program requirements were revised, new methods and program tools were created, and expectations for implementation at the manufacturing locations clarified. This paper focuses on the company's manufacturing ergonomics program activities during the past ten years and includes specifics of the program's objectives, risk assessment reduction process, and ergonomics technical expertise development. The main benefit achieved throughout the company is reducing employee injury while also increasing productivity and operating efficiency.

A new semiquantitative method for evaluation of metastasis progression.

PubMed

Volarevic, A; Ljujic, B; Volarevic, V; Milovanovic, M; Kanjevac, T; Lukic, A; Arsenijevic, N

2012-01-01

Although recent technical advancements are directed toward developing novel assays and methods for detection of micro and macro metastasis, there are still no reports of reliable, simple to use imaging software that could be used for the detection and quantification of metastasis in tissue sections. We herein report a new semiquantitative method for evaluation of metastasis progression in a well established 4T1 orthotopic mouse model of breast cancer metastasis. The new semiquantitative method presented here was implemented by using the Autodesk AutoCAD 2012 program, a computer-aided design program used primarily for preparing technical drawings in 2 dimensions. By using the Autodesk AutoCAD 2012 software- aided graphical evaluation we managed to detect each metastatic lesion and we precisely calculated the average percentage of lung and liver tissue parenchyma with metastasis in 4T1 tumor-bearing mice. The data were highly specific and relevant to descriptive histological analysis, confirming reliability and accuracy of the AutoCAD 2012 software as new method for quantification of metastatic lesions. The new semiquantitative method using AutoCAD 2012 software provides a novel approach for the estimation of metastatic progression in histological tissue sections.

Dynamic Assessment: One Approach and Some Initial Data. Technical Report No. 361.

ERIC Educational Resources Information Center

Campione, Joseph C.; Brown, Ann L.

In an effort to validate dynamic assessment methods influenced by Vygotsky's (1978) definition of zones of proximal development (an indicator of readiness), three sets of experiments addressed two goals: the development of diagnostic assessment methods and the use of diagnostic results to guide the design of instructional programs. The first two…

76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-04

... to FTA Circular 6100.1D, Research and Technical Assistance Training Program: Application Instructions... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of Final Circular AGENCY: Federal Transit Administration (FTA), DOT. ACTION...

10 CFR 455.131 - State ranking of grant applications.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) For technical assistance programs, buildings shall be ranked in descending priority based upon the... all buildings covered by eligible applications for: (1) Technical assistance programs for units of local government and public care institutions and (2) Technical assistance programs for schools and...

On-line Naval Engineering Skills Supplemental Training Program

DTIC Science & Technology

2010-01-01

Defense Technical University ( DTU ), the technical content for courses would have to be provided by the Naval technical authorities...of technological knowledge related to design engineering such as the DTU , or expanded within the mission scope of an existing organization such as...management program as a training tool for naval design engineers such as the DTU or a technical extension of the DAU program for acquisition training

Draft SEI Program Plans: 1994-1998

DTIC Science & Technology

1993-08-01

process must depersonalize risks so they are viewed as opportunities for program success. Factors for communication are in all the method devel...and the undergraduate level to adequately prepare new soft- ware engineers entering the work force. Educators and trainers of current professionals...learning opportu- nities. The technical foundation for many of these products is the evolving SEI model curricula for graduate and undergraduate degree

Revision of ISO 15859 Aerospace Fluid Standards

NASA Technical Reports Server (NTRS)

Greene, Benjamin; McClure, Mark B.

2012-01-01

A detailed review of ISO 15859 "Space Systems - Fluid Characteristics, Sampling and Test Methods" was performed An approach to revising Parts 1-9 and 11-13 was developed and concurred by the NASA Technical Standards Program Office. The approach was to align them with the highest level source documents, and not to program-specific requirements. The updated documents were prepared and presented.

Technical assistance for hazardous-waste reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, F.M.; McComas, C.A.

1987-12-01

Minnesota's Waste Management Board has established, developed, and funded the Minnesota Technical Assistance Program (MnTAP). The MnTAP programs offers technical assistance to generators of hazardous waste by offering telephone and onsite consultation, a waste reduction resource bank, information dissemination, a student intern program, and research awards for waste reduction projects. The program has completed three years of successful operation. The increasing interest in and use of MnTAP's services by hazardous-waste generators has justified the belief that state technical assistance programs have an important role to play in helping generators to reduce their waste production.

15 CFR 296.32 - Technical and educational services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Technical and educational services... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM Dissemination of Program Results § 296.32 Technical and educational services. (a) Under...

40 CFR 52.1110 - Small business stationary source technical and environmental compliance assistance program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... technical and environmental compliance assistance program. 52.1110 Section 52.1110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maryland § 52.1110 Small business stationary source technical and environmental...

76 FR 14372 - New Mexico Collaborative Forest Restoration Program Technical Advisory Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-16

... DEPARTMENT OF AGRICULTURE Forest Service New Mexico Collaborative Forest Restoration Program Technical Advisory Panel AGENCY: Forest Service, USDA. ACTION: Notice of meeting. SUMMARY: The New Mexico Collaborative Forest Restoration Program Technical Advisory Panel will meet in Albuquerque, New Mexico. The...

Considerations for the establishment of a machinery monitoring analysis program for surface ships of the US Navy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strunk, W.D.

1987-01-01

Personnel at the Oak Ridge National Laboratory were tasked by the US Navy to assist in establishing a maintenance monitoring program for machinery aboard surface ships. Given the number of surface ships, the variety of locations in which they operate, the different types of equipment (rotating and reciprocating, as well as instrumentation), and the different procedures which control the operation and maintenance of a ship, it can be seen, apart from the logistics of organizing such a monitoring program, that the technical issues are as varied and numerous as the ships themselves. Unique methods and procedures have been developed tomore » perform the tasks required on a large scale. Among the specific tasks and technical issues addressed were the development and installation of a data collection and communication instrumentation system for each port, the qualification of measurement methodologies and techniques, the establishment of computer data bases, the evaluation of the instrumentation used, training of civilian and military personnel, development of machinery condition assessment aids using machine design and modal analysis information, and development of computer displays. After these tasks were completed and the appropriate resolution integrated into the program, the final task was the development of a method to continually evaluate the effectiveness of the program, using actual maintenance records.« less

48 CFR 242.7400 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Contractor Facilities 242.7400 General. (a) Program managers may conclude that they need technical... manager may assign technical representatives under the procedures in 242.7401. (b) A technical representative is a representative of a DoD program, project, or system office performing non-CAS technical...

48 CFR 242.7400 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Contractor Facilities 242.7400 General. (a) Program managers may conclude that they need technical... manager may assign technical representatives under the procedures in 242.7401. (b) A technical representative is a representative of a DoD program, project, or system office performing non-CAS technical...

75 FR 56059 - Patent Examiner Technical Training Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

...); statistical methods in validation of microarry data; personalized medicine, manufacture of carbon nanospheres... processing, growing monocrystals, hydrogen production, liquid and gas purification and separation, making... Systems and Components: Mixed signal design and architecture, flexible displays, OLED display technology...

Workforce Investments: State Strategies to Preserve Higher-Cost Career Education Programs in Community and Technical Colleges

ERIC Educational Resources Information Center

Shulock, Nancy; Lewis, Jodi; Tan, Connie

2013-01-01

In today's highly-skilled economy, rewarding career pathways are available to those who acquire technical skills by enrolling in certificate and associate degree programs in a community or technical college. Such programs are often more costly to offer than liberal arts and sciences programs that prepare students to transfer to four-year…

24 CFR 891.175 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Technical assistance. 891.175... Requirements § 891.175 Technical assistance. For purposes of the Section 202 Program and the Section 811 Program, the Secretary shall make available appropriate technical assistance to assure that applicants...

10 CFR 905.40 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Technical assistance. 905.40 Section 905.40 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Energy Services § 905.40 Technical assistance. Western shall establish a program that provides technical assistance to customers to conduct integrated...

Evaluation of a Computerized Clinical Information System (Micromedex).

PubMed Central

Lundsgaarde, H. P.; Moreshead, G. E.

1991-01-01

This paper summarizes data collected as part of a project designed to identify and assess the technical and organizational problems associated with the implementation and evaluation of a Computerized Clinical Information System (CCIS), Micromedex, in three U.S. Department of Veterans Affairs Medical Centers (VAMCs). The study began in 1987 as a national effort to implement decision support technologies in the Veterans Administration Decentralized Hospital Computer Program (DHCP). The specific objectives of this project were to (1) examine one particular decision support technology, (2) identify the technical and organizational barriers to the implementation of a CCIS in the VA host environment, (3) assess the possible benefits of this system to VA clinicians in terms of therapeutic decision making, and (4) develop new methods for identifying the clinical utility of a computer program designed to provide clinicians with a new information tool. The project was conducted intermittently over a three-year period at three VA medical centers chosen as implementation and evaluation test sites for Micromedex. Findings from the Kansas City Medical Center in Missouri are presented to illustrate some of the technical problems associated with the implementation of a commercial database program in the DHCP host environment, the organizational factors influencing clinical use of the system, and the methods used to evaluate its use. Data from 4581 provider encounters with the CCIS are summarized. Usage statistics are presented to illustrate the methodological possibilities for assessing the "benefits and burdens" of a computerized information system by using an automated collection of user demographics and program audit trails that allow evaluators to monitor user interactions with different segments of the database. PMID:1807583

Evaluation of a Computerized Clinical Information System (Micromedex).

PubMed

Lundsgaarde, H P; Moreshead, G E

1991-01-01

This paper summarizes data collected as part of a project designed to identify and assess the technical and organizational problems associated with the implementation and evaluation of a Computerized Clinical Information System (CCIS), Micromedex, in three U.S. Department of Veterans Affairs Medical Centers (VAMCs). The study began in 1987 as a national effort to implement decision support technologies in the Veterans Administration Decentralized Hospital Computer Program (DHCP). The specific objectives of this project were to (1) examine one particular decision support technology, (2) identify the technical and organizational barriers to the implementation of a CCIS in the VA host environment, (3) assess the possible benefits of this system to VA clinicians in terms of therapeutic decision making, and (4) develop new methods for identifying the clinical utility of a computer program designed to provide clinicians with a new information tool. The project was conducted intermittently over a three-year period at three VA medical centers chosen as implementation and evaluation test sites for Micromedex. Findings from the Kansas City Medical Center in Missouri are presented to illustrate some of the technical problems associated with the implementation of a commercial database program in the DHCP host environment, the organizational factors influencing clinical use of the system, and the methods used to evaluate its use. Data from 4581 provider encounters with the CCIS are summarized. Usage statistics are presented to illustrate the methodological possibilities for assessing the "benefits and burdens" of a computerized information system by using an automated collection of user demographics and program audit trails that allow evaluators to monitor user interactions with different segments of the database.

Table-top job analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-12-01

The purpose of this Handbook is to establish general training program guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at Department of Energy (DOE) nuclear facilities. TTJA is not the only method of job analysis; however, when conducted properly TTJA can be cost effective, efficient, and self-validating, and represents an effective method of defining job requirements. The table-top job analysis is suggested in the DOE Training Accreditation Program manuals as an acceptable alternative to traditional methods of analyzing job requirements. DOE 5480-20A strongly endorses and recommends it as the preferred method for analyzing jobsmore » for positions addressed by the Order.« less

75 FR 34251 - Office of Special Education and Rehabilitative Services; Overview Information; Centers for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-16

... Information; Centers for Independent Living Program--Training and Technical Assistance; Notice Inviting... Training and Technical Assistance Project. Program Authority: 29 U.S.C. 796f(b); American Recovery and... Independent Living Program--Training and Technical Assistance--CFDA Number 84.400B must be submitted...

77 FR 16250 - Notice of Proposed Information Collection for Public Comment; Office of Native American Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-20

... Information Collection for Public Comment; Office of Native American Programs (ONAP) Training and Technical... subject proposal. The data required by Office of Native American Programs Training and Technical... progress. The data identifies needs, outputs and outcomes of the training and technical assistance. DATES...

77 FR 9216 - Native American Career and Technical Education Program; Proposed Waivers and Extension of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... DEPARTMENT OF EDUCATION Native American Career and Technical Education Program; Proposed Waivers... Education, Department of Education. ACTION: Notice. SUMMARY: For 60-month projects funded in fiscal year (FY) 2007 under the Native American Career and Technical Education Program (NACTEP), the Secretary proposes...

System approach to modeling of industrial technologies

NASA Astrophysics Data System (ADS)

Toropov, V. S.; Toropov, E. S.

2018-03-01

The authors presented a system of methods for modeling and improving industrial technologies. The system consists of information and software. The information part is structured information about industrial technologies. The structure has its template. The template has several essential categories used to improve the technological process and eliminate weaknesses in the process chain. The base category is the physical effect that takes place when the technical process proceeds. The programming part of the system can apply various methods of creative search to the content stored in the information part of the system. These methods pay particular attention to energy transformations in the technological process. The system application will allow us to systematize the approach to improving technologies and obtaining new technical solutions.

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

Sonic Boom Modeling Technical Challenge

NASA Technical Reports Server (NTRS)

Sullivan, Brenda M.

2007-01-01

This viewgraph presentation reviews the technical challenges in modeling sonic booms. The goal of this program is to develop knowledge, capabilities and technologies to enable overland supersonic flight. The specific objectives of the modeling are: (1) Develop and validate sonic boom propagation model through realistic atmospheres, including effects of turbulence (2) Develop methods enabling prediction of response of and acoustic transmission into structures impacted by sonic booms (3) Develop and validate psychoacoustic model of human response to sonic booms under both indoor and outdoor listening conditions, using simulators.

Aerial sketchmapping for monitoring forest conditions in Southern Brazil

Treesearch

Y. M. Malheiros de Oliveira; M. A. Doetzer Rosot; N. B. da Luz; W. M. Ciesla; E.W. Johnson; R. Rhea; J.F. Jr. Penteado

2006-01-01

Aerial sketchmapping is a simple, low cost remote sensing method used for detection and mapping of forest damage caused by biotic agents (insects, pathogens and other pests) and abiotic agents (wind, fire, storms, hurricane, ice storms) in North America. This method was introduced to Brazil in 2001/2002 via a USDA Forest Service/EMBRAPA technical exchange program,...

International Baccalaureate Diploma Programs (IBDP) in Oklahoma: A Mixed Methods Study

ERIC Educational Resources Information Center

Hood, Susan J.

2012-01-01

Scope and Method of Study: As Oklahoma grows in technical markets, the need for science, technology, engineering, and mathematics (STEM) educated individuals will continue to increase. Our focus in aviation should be at focusing to attract students into STEM related fields, however, a stronger focus needs to be in retaining the top tier category…

40 CFR 52.2586 - Small business stationary source technical and environmental compliance assistance program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PLANS (CONTINUED) Wisconsin § 52.2586 Small business stationary source technical and environmental compliance assistance program. The Wisconsin small business stationary source technical and environmental...

40 CFR 52.2586 - Small business stationary source technical and environmental compliance assistance program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PLANS (CONTINUED) Wisconsin § 52.2586 Small business stationary source technical and environmental compliance assistance program. The Wisconsin small business stationary source technical and environmental...

40 CFR 52.2586 - Small business stationary source technical and environmental compliance assistance program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PLANS (CONTINUED) Wisconsin § 52.2586 Small business stationary source technical and environmental compliance assistance program. The Wisconsin small business stationary source technical and environmental...

40 CFR 52.2586 - Small business stationary source technical and environmental compliance assistance program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PLANS (CONTINUED) Wisconsin § 52.2586 Small business stationary source technical and environmental compliance assistance program. The Wisconsin small business stationary source technical and environmental...

40 CFR 52.2586 - Small business stationary source technical and environmental compliance assistance program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PLANS (CONTINUED) Wisconsin § 52.2586 Small business stationary source technical and environmental compliance assistance program. The Wisconsin small business stationary source technical and environmental...

Using Modern Statistical Methods to Analyze Demographics of Kansas ABE/GED Students Who Transition to Community or Technical College Programs

ERIC Educational Resources Information Center

Zacharakis, Jeff; Wang, Haiyan; Patterson, Margaret Becker; Andersen, Lori

2015-01-01

This research analyzed linked high-quality state data from K-12, adult education, and postsecondary state datasets in order to better understand the association between student demographics and successful completion of a postsecondary program. Due to the relatively small sample size compared to the large number of features, we analyzed the data…

Issues With Access to Acquisition Data and Information in the Department of Defense

DTIC Science & Technology

2017-01-01

both procurement and operations), technical performance, contracts and contractor performance, and program decision memo- randa. These data are...the cost of weapon systems (both procurement and operations), techni- cal performance, contracts and contractor performance, and program decision...and tracking sensitive data, and 19 percent have no method at all (Trustwave, 2014, p. 4; Kerner, 2014). U.S. defense contractors face similar

77 FR 20369 - Applications for New Awards; Centers for Independent Living-Training and Technical Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-04

... Education ACTION: Notice. Overview Information Centers for Independent Living--Training and Technical.... Funding Opportunity Description Purpose of Program The purpose of the Training and Technical Assistance grant under the Centers for Independent Living program is to provide training and technical assistance...

Waukesha County Technical College 1998 Comprehensive Annual Financial Report.

ERIC Educational Resources Information Center

Tessmann, Cary A.

Waukesha County Technical College (WCTC) is one of 16 institutions in the Wisconsin Technical College System. The college offers associate of applied science degree programs, technical diplomas and certificates, apprenticeship programs and other adult education services. This financial report covers fiscal year 1998 and is divided into four…

Project T.E.A.M. (Technical Education Advancement Modules). Final Report.

ERIC Educational Resources Information Center

Greenville Technical Coll., SC.

Project TEAM (Technical Education Advancement Modules), a cooperative demonstration program for high technology training, created an introductory technical training program and a consumer education package emphasizing the benefits of technical training. The curriculum and training focus of the project began with an assessment of employee needs in…

Understanding Cost-Effectiveness of Energy Efficiency Programs: Best Practices, Technical Methods, and Emerging Issues for Policy-Makers

EPA Pesticide Factsheets

Reviews the issues and approaches involved in considering and adopting cost-effectiveness tests for energy efficiency, including discussing each perspective represented by the five standard cost-effectiveness tests and clarifying key terms.

Technical Assistance and Program Support; DOD Historical Black Colleges and Universities and Minority Institutions Program.

DTIC Science & Technology

2000-04-01

AD Award Number: DAMD17-98-2-8012 TITLE: Technical Assistance and Program Support; DOD Historical Black Colleges and Universities and Minority...2000 3. REPORT TYPE AND DATES COVERED Annual (1 May 99 - 30 Apr 00): 4. TITLE AND SUBTITLE Technical Assistance and Program Support; DOD...UNCF’s Infrastructure Development Assistance Program (IDAP) has been involved myriad of tasks to support the Department of Defense’s interest to

New Wine in New Bottles: Transforming Vocational Education into Career and Technical Education. Practice Application Brief No. 21.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Teachers responsible for transforming their vocational education programs into career and technical education (CTE) programs need to concentrate on ensuring programs' technical and academic rigor, engaging in collaboration in school and in the community, keeping current through professional development experiences, and extending learning beyond…

77 FR 15995 - Notice of Request for Extension of a Currently Approved Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-19

... information collection in support of the program for Self-Help Technical Assistance Grants (7 CFR part 1944-I...-0783, Telephone (202) 720-1489. SUPPLEMENTARY INFORMATION: Title: 7 CFR 1944-I, Self-Help Technical... programs of technical and supervisory assistance for self-help housing loan program, as authorized under...

Structure in Community College Career-Technical Programs: A Qualitative Analysis. CCRC Working Paper No. 50

ERIC Educational Resources Information Center

Van Noy, Michelle; Weiss, Madeline Joy; Jenkins, Davis; Barnett, Elisabeth A.; Wachen, John

2012-01-01

Using data obtained from interviews and program websites at Washington community and technical colleges, the authors of this study examine the structure of community college career-technical programs in allied health, business and marketing, computer and information studies, and mechanics and repair. A framework for structure with four…

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Innovation Research (SBIR) Program. As prescribed in 227.7104(a), use the following clause: Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (JUN 1995...

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2014 CFR

2014-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Innovation Research (SBIR) Program. As prescribed in 227.7104(a), use the following clause: Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (FEB 2014...

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Innovation Research (SBIR) Program. As prescribed in 227.7104(a), use the following clause: Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (MAR 2011...

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2013 CFR

2013-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Innovation Research (SBIR) Program. As prescribed in 227.7104(a), use the following clause: Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (MAY 2013...

Computer Programs for Technical Communicators: The Compelling Curriculum. Working Draft.

ERIC Educational Resources Information Center

Selfe, Cynthia L.; Wahlstrom, Billie J.

A series of computer programs have been developed at Michigan Technological University for use with technical writing and technical communications classes. The first type of program in the series, CURIE II, includes process-based modules, each of which corresponds to one of the following assignments: memoranda, resumes, feasibility reports,…

77 FR 30512 - Native American Career and Technical Education Program; Final Waivers and Extension of Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

... DEPARTMENT OF EDUCATION Native American Career and Technical Education Program; Final Waivers and... American Career and Technical Education Program Catalog of Federal Domestic Assistance (CFDA) Number: 84.101A. SUMMARY: For 60-month projects funded in fiscal year (FY) 2007 under the Native American Career...

Computer program to perform cost and weight analysis of transport aircraft. Volume 2: Technical volume

NASA Technical Reports Server (NTRS)

1973-01-01

An improved method for estimating aircraft weight and cost using a unique and fundamental approach was developed. The results of this study were integrated into a comprehensive digital computer program, which is intended for use at the preliminary design stage of aircraft development. The program provides a means of computing absolute values for weight and cost, and enables the user to perform trade studies with a sensitivity to detail design and overall structural arrangement. Both batch and interactive graphics modes of program operation are available.

Development and implementation of a technical and didactical training program for student tutors in the dissection course.

PubMed

Shiozawa, Thomas; Hirt, Bernhard; Celebi, Nora; Baur, Friederike; Weyrich, Peter; Lammerding-Köppel, Maria

2010-12-20

student tutors have a long tradition in gross anatomy instruction. However, the full potential of the tutors is generally not tapped, since little attention is paid to their technical and didactical training. The aim of this paper is to report a systematic approach to the development, didactic reasoning and implementation of a curriculum for training student tutors in gross anatomy. the training program was developed using the six-step approach of Kern's curriculum development model. For needs assessment, the literature research was amended by a survey among the 1st and 2nd year students of the dissection course (n=167) and two independent 90 min focus group interviews with the tutors who supervised these students (n=15). Protocols were transcribed and analyzed by margin coding. The training curriculum was setup on the basis of these data. corresponding to the literature, the students want student tutors with good teaching competence as well as adequate content knowledge and technical competence. Supporting that, the tutors request a training program enhancing their didactic skills as well as their knowledge of content and working using relevant methods. Thus, a combined didactic and professional training program has been developed. Six professional and 11 didactic learning objectives were defined. A 3 weeks training curriculum was implemented, using microteaching and group exercises for didactics and active dissection for technical training. Both parts were interlocked on a contextual and practical level. our focus group analyses revealed that a specific training program for student tutors in the dissection course is necessary. We describe a feasible task-oriented training curriculum combining didactic and professional objectives. 2010. Published by Elsevier GmbH.

Toward an objective assessment of technical skills: a national survey of surgical program directors in Saudi Arabia.

PubMed

Alkhayal, Abdullah; Aldhukair, Shahla; Alselaim, Nahar; Aldekhayel, Salah; Alhabdan, Sultan; Altaweel, Waleed; Magzoub, Mohi Elden; Zamakhshary, Mohammed

2012-01-01

After almost a decade of implementing competency-based programs in postgraduate training programs, the assessment of technical skills remains more subjective than objective. National data on the assessment of technical skills during surgical training are lacking. We conducted this study to document the assessment tools for technical skills currently used in different surgical specialties, their relationship with remediation, the recommended tools from the program directors' perspective, and program directors' attitudes toward the available objective tools to assess technical skills. This study was a cross-sectional survey of surgical program directors (PDs). The survey was initially developed using a focus group and was then sent to 116 PDs. The survey contains demographic information about the program, the objective assessment tools used, and the reason for not using assessment tools. The last section discusses the recommended tools to be used from the PDs' perspective and the PDs' attitude and motivation to apply these tools in each program. The associations between the responses to the assessment questions and remediation were statistically evaluated. Seventy-one (61%) participants responded. Of the respondents, 59% mentioned using only nonstandardized, subjective, direct observation for technical skills assessment. Sixty percent use only summative evaluation, whereas 15% perform only formative evaluations of their residents, and the remaining 22% conduct both summative and formative evaluations of their residents' technical skills. Operative portfolios are kept by 53% of programs. The percentage of programs with mechanisms for remediation is 29% (19 of 65). The survey showed that surgical training programs use different tools to assess surgical skills competency. Having a clear remediation mechanism was highly associated with reporting remediation, which reflects the capability to detect struggling residents. Surgical training leadership should invest more in standardizing the assessment of surgical skills.

Program of Research in Flight Dynamics in The George Washington University at NASA Langley Research Center, Hampton, Virginia

NASA Technical Reports Server (NTRS)

Klein, Vladislav

2002-01-01

The program objectives were defined in the original proposal entitled 'Program of Research in Flight Dynamics in the JIAFS at NASA Langley Research Center' which was originated March 20, 1975, and yearly renewals of the research program dated December 1, 1998 to December 31, 2002. The program included three major topics: 1) Improvement of existing methods and development of new methods for flight and wind tunnel data analysis based on system identification methodology; 2) Application of these methods to flight and wind tunnel data obtained from advanced aircraft; 3) Modeling and control of aircraft. The principal investigator of the program was Dr. Vladislav Klein, Professor Emeritus at The George Washington University, DC. Seven Graduate Research Scholar Assistants (GRSA) participated in the program. The results of the research conducted during four years of the total co-operative period were published in 2 NASA Technical Reports, 3 thesis and 3 papers. The list of these publications is included.

Manufacturing Methods and Technology Program for Low Cost Hybrid Silicon Photodetector Modules

DTIC Science & Technology

1979-12-30

RESEARCH LN EVEMN TECHNICAL REPORT 4 CORADOOM- 77- C -0489-F I CMANUFACTURING METHODS AND TECHNOLOGY PROGRAM FOR LOW COST HYBRID SILICON PHOTODETECTORS...rINAL REPORT OR US ARMY CONTRACT NO, DAAD07-77- C -0489 TITLED 11MM&TMud SURE FOR COS HYBRID SILICON PHOTODRTECTOR MODULS", DATED 79/12/30 Gentlemen...when it is no longer needed. Do not return it to the originator. D.-stributi-on! Availability COcas- :Dist c specia S I ’ Cb.A *"itI. -P0 ~~J~,+~1

Earned Value-Added

NASA Technical Reports Server (NTRS)

Jansen, Michael

2005-01-01

Earned value management [EVM] ...either you swear by it, or swear at it. Either way, there s no getting around the fact that EVM can be one of the most efficient and insightful methods of synthesizing cost, schedule, and technical status information into a single set of program health metrics. Is there a way of implementing EVM that allows a program to reap its early warning benefits while avoiding the pitfalls that make it infamous to its detractors? That s the question recently faced by the International Space Station [ISS] program.

A Proposed Study Program for the Enhancement of Performance of Clocks in the DCS Timing system.

DTIC Science & Technology

1982-08-31

INTRODUCTION This technical note presents a proposed program of test and analysis with 𔃾 a goal of using prediction techniques to enhance the...future digital DCS and methods of satisfying them so that the reader will understand: (1) what is needed from this program to enhance the performance...over a number of years, using both simulation and analysis , have recommended that all major nodes of the DCS be referenced to Coordinated Universal Time

Investigating Employability: A Study to Ascertain Whether Attaining Stackable Credentials Increases Opportunity for Employment for Career Technical Graduates

ERIC Educational Resources Information Center

Whittington, Amy Green

2017-01-01

Career technical education plays an important part in the mission of community colleges--providing educational opportunities needed by members of their communities. Career technical programs prepare students for entry into the workforce. Accountability standards for career technical programs, from local, state, and federal bodies, monitor…

48 CFR 252.227-7018 - Rights in noncommercial technical data and computer software-Small Business Innovation Research...

Code of Federal Regulations, 2012 CFR

2012-10-01

... technical data and computer software-Small Business Innovation Research (SBIR) Program. 252.227-7018 Section... Clauses 252.227-7018 Rights in noncommercial technical data and computer software—Small Business... Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program (MAR 2011...

Announcement Notice (AN) 241.4 - Software | OSTI, US Dept of Energy Office

Science.gov Websites

of Scientific and Technical Information Skip to main content Scientific and Technical Information Program The home of the U.S. Department of Energy's Scientific and Technical Information Program ) Scientific and Technical Information (STI) products for announcement and availability. An AN includes review

IMPLICATIONS OF WOMEN'S WORK PATTERNS FOR PROGRAM DEVELOPMENT IN VOCATIONAL AND TECHNICAL EDUCATION.

ERIC Educational Resources Information Center

LEE, SYLVIA L.; AND OTHERS

THE IMPLICATIONS OF WOMEN'S LABOR FORCE PARTICIPATION FOR EDUCATORS AND LEADERS PLANNING PROGRAMS IN VOCATIONAL AND TECHNICAL EDUCATION WERE DERIVED AT A 2-DAY CONFERENCE BY 30 PEOPLE REPRESENTING THE VARIOUS SERVICES IN VOCATIONAL-TECHNICAL EDUCATION AND RELATED AREAS. IMPLICATIONS AND RECOMMENDATIONS FOR VOCATIONAL AND TECHNICAL EDUCATION…

An Interdisciplinary Program in Technical Communications: Problems Encountered.

ERIC Educational Resources Information Center

Eckman, Martha

The need for experts in technical communication is growing significantly while the number of college graduates in the field accounts for less than one percent of the need. Three major types of problems should be considered in trying to establish a technical communication program: those involving society's need for better technical communicators,…

A Case Study of Technical Assistance to Demonstration Programs for Young Handicapped Children. Part II.

ERIC Educational Resources Information Center

Behr, Shirley K.; And Others

A project to provide technical assistance to staffs of two demonstration programs for preschool handicapped children and their families is described. The focus was technical assistance developed and exercised by the Technical Assistance Development System (TADS), which assisted in the development of the Handicapped Children's Early Education…

A Case Study of Technical Assistance to Demonstration Programs for Young Handicapped Children. Part I.

ERIC Educational Resources Information Center

Behr, Shirley K.; And Others

The interim report presents an evaluation of TADS (Technical Assistance Development System) through case studies of TADS technical assistance to the staffs of two demonstration programs for preschool handicapped children and their families. Purposes of the study included obtaining indepth descriptions of the technical assistance process to…

Overview of mechanics of materials branch activities in the computational structures area

NASA Technical Reports Server (NTRS)

Poe, C. C., Jr.

1992-01-01

Base programs and system programs are discussed. The base programs include fundamental research of composites and metals for airframes leading to characterization of advanced materials, models of behavior, and methods for predicting damage tolerance. Results from the base programs support the systems programs, which change as NASA's missions change. The National Aerospace Plane (NASP), Advanced Composites Technology (ACT), Airframe Structural Integrity Program (Aging Aircraft), and High Speed Research (HSR) programs are currently being supported. Airframe durability is one of the key issues in each of these system programs. The base program has four major thrusts, which will be reviewed subsequently. Additionally, several technical highlights will be reviewed for each thrust.

BULK SAMPLE ANALYSIS FOR ASBESTOS CONTENT: EVALUATION OF THE TENTATIVE METHOD

EPA Science Inventory

The U.S. Environmental Protection Agency Asbestos-in-Schools Program was established in March, 1979 to provide information and technical assistance to the public for addressing problems presented by asbestos-containing insulation materials in school buildings. Because there were ...

INTERIM METHOD FOR THE DETERMINATION OF ASBESTOS IN BULK INSULATION SAMPLES

EPA Science Inventory

The U.S. Environmental Protection Agency Asbestos-in-Schools Program was established in March, 1979 to provide information and technical assistance to the public for addressing problems presented by asbestos-containing insulation materials in school buildings. Because there were ...

Commercial Building Energy Asset Score Program Overview and Technical Protocol (Version 1.1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Na; Goel, Supriya; Makhmalbaf, Atefe

The U.S. Department of Energy (DOE) is developing a voluntary national scoring system for commercial buildings to help building owners and managers assess a building’s energy-related systems independent of operations. The goal of the score is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system, known as the Commercial Building Energy Asset Score, will allow building owners and managers to compare their building infrastructure against peers and track building upgrades over time. The system will also help other building stakeholders (e.g., building investors, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in amore » way that is independent from operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset scoring tool. The alternative methods that were considered prior to developing the current approach are described in the Program Overview and Technical Protocol Version 1.0.« less

14 CFR 399.91 - Air carrier participation in programs of technical assistance to airlines of less developed...

Code of Federal Regulations, 2011 CFR

2011-01-01

... § 399.91 Air carrier participation in programs of technical assistance to airlines of less developed... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Air carrier participation in programs of technical assistance to airlines of less developed countries. 399.91 Section 399.91 Aeronautics and Space...

14 CFR 399.91 - Air carrier participation in programs of technical assistance to airlines of less developed...

Code of Federal Regulations, 2010 CFR

2010-01-01

... § 399.91 Air carrier participation in programs of technical assistance to airlines of less developed... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Air carrier participation in programs of technical assistance to airlines of less developed countries. 399.91 Section 399.91 Aeronautics and Space...

A Comparison of the Career and Technical Education Programs in a US Community College and a Chinese Institution

ERIC Educational Resources Information Center

Hou, Harry

2010-01-01

This research study explores and compares the career and technical education programs offered in a US community college and the vocational/career and technology education programs offered in a comparable Chinese postsecondary institution. The study sought to find positive transferable characteristics of the career and technical education programs…

Weapon System Costing Methodology for Aircraft Airframes and Basic Structures. Volume I. Technical Volume

DTIC Science & Technology

1975-06-01

the Air Force Flight Dynamics Laboratory for use in conceptual and preliminary designs pauses of weapon system development. The methods are a...trade study method provides ai\\ iterative capability stemming from a direct interface with design synthesis programs. A detailed cost data base ;ind...system for data expmjsion is provided. The methods are designed for ease in changing cost estimating relationships and estimating coefficients

Egomotion Estimation with Optic Flow and Air Velocity Sensors

DTIC Science & Technology

2012-09-17

Program Manager This report is published in the interest of scientific and technical information exchange, and its publication...flight height is known. Franz et al. (2004) have developed a method of distance and groundspeed estimation using an omnidirectional camera, but knowledge ...method we have described works in both constant and varying wind and even over sloped terrain. Our method also does not require any prior knowledge of

1999 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 2; High Lift

NASA Technical Reports Server (NTRS)

Hahne, David E. (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1999 Aerodynamic Performance Technical Review on February 8-12, 1999 in Anaheim, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in the areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High Lift, and Flight Controls. The review objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among die scientists and engineers working on HSCT aerodynamics. In particular, single and midpoint optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented, along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program. This Volume 2/Part 2 publication covers the tools and methods development session.

Team Problem Solving Strategies with a Survey of These Methods Used by Faculty Members in Engineering Technology

ERIC Educational Resources Information Center

Marcus, Michael L.; Winters, Dixie L.

2004-01-01

Students from science, engineering, and technology programs should be able to work together as members of project teams to find solutions to technical problems. The exercise in this paper describes the methods actually used by a project team from a Biomedical Instrumentation Corporation in which scientists, technicians, and engineers from various…

Comparison of Efficiency of Jackknife and Variance Component Estimators of Standard Errors. Program Statistics Research. Technical Report.

ERIC Educational Resources Information Center

Longford, Nicholas T.

Large scale surveys usually employ a complex sampling design and as a consequence, no standard methods for estimation of the standard errors associated with the estimates of population means are available. Resampling methods, such as jackknife or bootstrap, are often used, with reference to their properties of robustness and reduction of bias. A…

Egomotion Estimation with Optic Flow and Air Velocity Sensors

DTIC Science & Technology

2012-01-22

RUMMELT ADAM J. RUTKOWSKI Acting Technical Advisor, RWW Program Manager This report is...method of distance and groundspeed estimation using an omnidirectional camera, but knowledge of the average scene distance is required. Flight height...varying wind and even over sloped terrain. Our method also does not require any prior knowledge of the environment or the flyer motion states. This

Communication Requirements of Employees of Business and Industry Represented by Areas of Technological Study at Southern Maine Vocational Technical Institute.

ERIC Educational Resources Information Center

Cary, Penny J.; Sweeney, Kevin F.

A study examined the need and demand for communication skills for employees in the technical fields for which Southern Maine Vocational Technical Institute offers programs of academic preparation. Two members of the Institute's English Department interviewed representatives of organizations that have hired technical program graduates. Further…

Copyrighted Software | OSTI, US Dept of Energy Office of Scientific and

Science.gov Websites

Technical Information Skip to main content Scientific and Technical Information Program The home of the U.S. Department of Energy's Scientific and Technical Information Program (STIP) Here you Energy U.S. Department of Energy Office of Science Office of Scientific and Technical information Website

About STIP | OSTI, US Dept of Energy Office of Scientific and Technical

Science.gov Websites

Information Skip to main content Scientific and Technical Information Program The home of the U.S. Department of Energy's Scientific and Technical Information Program (STIP) Here you will find through scientific and technical information (STI), a key outcome of DOE R&D and other activities

Contact Us | OSTI, US Dept of Energy Office of Scientific and Technical

Science.gov Websites

Information Skip to main content Scientific and Technical Information Program The home of the U.S. Department of Energy's Scientific and Technical Information Program (STIP) Here you will find MAIL TO: U.S. Department of Energy Office of Scientific and Technical Information ATTN: STIP P.O. Box

Research and applications: Artificial intelligence

NASA Technical Reports Server (NTRS)

Raphael, B.; Fikes, R. E.; Chaitin, L. J.; Hart, P. E.; Duda, R. O.; Nilsson, N. J.

1971-01-01

A program of research in the field of artificial intelligence is presented. The research areas discussed include automatic theorem proving, representations of real-world environments, problem-solving methods, the design of a programming system for problem-solving research, techniques for general scene analysis based upon television data, and the problems of assembling an integrated robot system. Major accomplishments include the development of a new problem-solving system that uses both formal logical inference and informal heuristic methods, the development of a method of automatic learning by generalization, and the design of the overall structure of a new complete robot system. Eight appendices to the report contain extensive technical details of the work described.

Linked Learning: Can Career and Technical Education Programs Take California High Schools into the 21st Century?

ERIC Educational Resources Information Center

Adams, Brian Edward

2012-01-01

This qualitative study explored the ability of a linked learning career and technical education program to engage fully students and thereby increase at-risk students' persistence in school. The focus was to identify the degree to which linked learning career and technical education programs provide a community atmosphere, increase and maintained…

Seizing the Future: How Ohio's Career-Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Careers

ERIC Educational Resources Information Center

Guarino, Heidi; Yoder, Shaun

2015-01-01

"Seizing the Future: How Ohio's Career and Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Work," demonstrates Ohio's progress in developing strong policies for career and technical education (CTE) programs to promote rigor, including college- and career-ready graduation…

A Survey of Vocational Administrators and Teachers in Career and Technical Education Centers regarding Their Perception of Vocational Program Improvements

ERIC Educational Resources Information Center

Hummel, Richard Lynn, Jr.

2012-01-01

The purpose of this statewide study is to assess the perceived improvements made to programs that are offered at Career and Technical Education Centers from the perspective of vocational administrators and teachers following the Bureau of Career and Technical Education conduction of an Approved Program Evaluation. The Pennsylvania Bureau of Career…

A Case Study of Technical Assistance to Demonstration Programs for Young Handicapped Children. Part III.

ERIC Educational Resources Information Center

Behr, Shirley K.; And Others

The report describes the third and final year of a 3-year case study of the technical assistance process as implemented by the Technical Assistance Development System (TADS) for the staffs of two demonstration programs for preschool handicapped children and their families. Following a review of TADS and the two demonstration programs, the…

Professional Development Programs in Community and Technical Colleges: Are Occupational-Technical Faculty Well Served?

ERIC Educational Resources Information Center

Hoerner, James L.; And Others

1991-01-01

According to a survey receiving 878 responses from 1,252 community/technical colleges, (1) 708 have professional development programs; (2) 48% rarely offer programs to part-time faculty; (3) funding was healthy for full-time, but 74% had no funding for part-time faculty development; and (4) incentives included intrinsic reward (80%), travel funds…

Comparing methods of ploidy estimation in potato.

USDA-ARS?s Scientific Manuscript database

Ploidy manipulation and the resulting need for rapid ploidy screening is an important part of a potato research and breeding program. Determining ploidy by counting chromosomes or measuring DNA in individual cells is definitive, but takes time, technical skills and equipment. We tested three predi...

48 CFR 35.002 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... programs is to advance scientific and technical knowledge and apply that knowledge to the extent necessary... are directed toward objectives for which the work or methods cannot be precisely described in advance... to encourage the best sources from the scientific and industrial community to become involved in the...

48 CFR 35.002 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... programs is to advance scientific and technical knowledge and apply that knowledge to the extent necessary... are directed toward objectives for which the work or methods cannot be precisely described in advance... to encourage the best sources from the scientific and industrial community to become involved in the...

48 CFR 35.002 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... programs is to advance scientific and technical knowledge and apply that knowledge to the extent necessary... are directed toward objectives for which the work or methods cannot be precisely described in advance... to encourage the best sources from the scientific and industrial community to become involved in the...

77 FR 5155 - Interest Rate Risk Policy and Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

... directors and management; appropriate IRR measurement and monitoring systems; good internal controls; and informed decision-making based on IRR measurement system results. It also provides guidelines for... technical aspects of IRR measurement methods. Of these, some said Appendix B implied a preference for the...

Advanced prediction technique for the low speed aerodynamics of V/STOL aircraft. Volume 1: Technical discussion

NASA Technical Reports Server (NTRS)

Beatty, T. D.; Worthey, M. K.

1984-01-01

The V/STOL Aircraft Propulsive Effects (VAPE) computerized prediction method is evaluated. The program analyzes viscous effects, various jet, inlet, and Short TakeOff and Landing (STOL) models, and examines the aerodynamic configurations of V/STOL aircraft.

Summary of nondestructive testing theory and practice

NASA Technical Reports Server (NTRS)

Meister, R. P.; Randall, M. D.; Mitchell, D. K.; Williams, L. P.; Pattee, H. E.

1972-01-01

The ability to fabricate design critical and man-rated aerospace structures using materials near the limits of their capabilities requires a comprehensive and dependable assurance program. The quality assurance program must rely heavily on nondestructive testing methods for thorough inspection to assess properties and quality of hardware items. A survey of nondestructive testing methods is presented to provide space program managers, supervisors and engineers who are unfamiliar with this technical area with appropriate insight into the commonly accepted nondestructive testing methods available, their interrelationships, used, advantages and limitations. Primary emphasis is placed on the most common methods: liquid penetrant, magnetic particle, radiography, ultrasonics and eddy current. A number of the newer test techniques including thermal, acoustic emission, holography, microwaves, eddy-sonic and exo-electron emission, which are beginning to be used in applications of interest to NASA, are also discussed briefly.

Methods and means used in programming intelligent searches of technical documents

NASA Technical Reports Server (NTRS)

Gross, David L.

1993-01-01

In order to meet the data research requirements of the Safety, Reliability & Quality Assurance activities at Kennedy Space Center (KSC), a new computer search method for technical data documents was developed. By their very nature, technical documents are partially encrypted because of the author's use of acronyms, abbreviations, and shortcut notations. This problem of computerized searching is compounded at KSC by the volume of documentation that is produced during normal Space Shuttle operations. The Centralized Document Database (CDD) is designed to solve this problem. It provides a common interface to an unlimited number of files of various sizes, with the capability to perform any diversified types and levels of data searches. The heart of the CDD is the nature and capability of its search algorithms. The most complex form of search that the program uses is with the use of a domain-specific database of acronyms, abbreviations, synonyms, and word frequency tables. This database, along with basic sentence parsing, is used to convert a request for information into a relational network. This network is used as a filter on the original document file to determine the most likely locations for the data requested. This type of search will locate information that traditional techniques, (i.e., Boolean structured key-word searching), would not find.

48 CFR 719.271-5 - Cognizant technical officers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DEVELOPMENT SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Policies 719.271-5 Cognizant technical officers. Since the procurement process starts with the establishment of a requirement, the actions of the cognizant technical officers can affect the opportunity of small business to participate equitably...

48 CFR 719.271-5 - Cognizant technical officers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... officers. 719.271-5 Section 719.271-5 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Policies 719.271-5 Cognizant technical officers... cognizant technical officers can affect the opportunity of small business to participate equitably...

Annual progress report : for the period of January 2001 through December 2001 : Florida Transit Training Program (2001) : Florida Technical Assistance Program (2001)

DOT National Transportation Integrated Search

2001-01-01

The following progress report is intended to highlight the significant activities of the Florida Transit Training Program and Florida Technical Assistant Program for the 2001 year. Activities of the Florida Statewide Transit Training Program are pres...

An Interview with Joe McMann: His Life Lessons

NASA Technical Reports Server (NTRS)

McMann, Joe

2011-01-01

Pica Kahn conducted "An Interview with Joe McMann: His Life Lessons" on May 23, 2011. With over 40 years of experience in the aerospace industry, McMann has gained a wealth of knowledge. Many have been interested in his biography, progression of work at NASA, impact on the U.S. spacesuit, and career accomplishments. This interview highlighted the influences and decision-making methods that impacted his technical and management contributions to the space program. McMann shared information about the accomplishments and technical advances that committed individuals can make.

Selling Technical Sales to Engineering Learners

ERIC Educational Resources Information Center

Bumblauskas, Daniel P.; Carberry, Adam R.; Sly, David P.

2017-01-01

Sales engineering or technical sales programs bridge engineering and business to educate engineering students in sales specific to their discipline. Students develop business awareness through such programs, providing the sales workforce with technically knowledgeable salespeople. The following study analyzed cohorts of students enrolled in a…

TADS Needs Assessment Procedures Manual, Summer 1980.

ERIC Educational Resources Information Center

Black, Talbot; And Others

The TADS (Technical Assistance Development System) Needs Assessment Manual is designed to guide the comprehensive review of Handicapped Children's Early Education Program (HCEEP) demonstration projects in identifying technical assistance needs. An introduction reviews the TADS technical assistance model which includes program planning, needs…

10 CFR 455.121 - Grant applications for State technical assistance, program assistance, and marketing programs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... costs for such program; (4) The energy conservation measures funded from non-Federal sources under this... non-Federal sources of funding to carry out the State's program(s) for energy conservation measures... 10 Energy 3 2010-01-01 2010-01-01 false Grant applications for State technical assistance, program...

Final Report Inspection of Aged/Degraded Containments Program.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naus, Dan J; Ellingwood, B R; Oland, C Barry

2005-09-01

The Inspection of Aged/Degraded Containments Program had primary objectives of (1) understanding the significant factors relating corrosion occurrence, efficacy of inspection, and structural capacity reduction of steel containments and liners of reinforced concrete containments; (2) providing the United States Nuclear Regulatory Commission (USNRC) reviewers a means of establishing current structural capacity margins or estimating future residual structural capacity margins for steel containments, and concrete containments as limited by liner integrity; (3) providing recommendations, as appropriate, on information to be requested of licensees for guidance that could be utilized by USNRC reviewers in assessing the seriousness of reported incidences of containmentmore » degradation; and (4) providing technical assistance to the USNRC (as requested) related to concrete technology. Primary program accomplishments have included development of a degradation assessment methodology; reviews of techniques and methods for inspection and repair of containment metallic pressure boundaries; evaluation of high-frequency acoustic imaging, magnetostrictive sensor, electromagnetic acoustic transducer, and multimode guided plate wave technologies for inspection of inaccessible regions of containment metallic pressure boundaries; development of a continuum damage mechanics-based approach for structural deterioration; establishment of a methodology for reliability-based condition assessments of steel containments and liners; and fragility assessments of steel containments with localized corrosion. In addition, data and information assembled under this program has been transferred to the technical community through review meetings and briefings, national and international conference participation, technical committee involvement, and publications of reports and journal articles. Appendix A provides a listing of program reports, papers, and publications; and Appendix B contains a listing of program-related presentations.« less

Approximation concepts for efficient structural synthesis

NASA Technical Reports Server (NTRS)

Schmit, L. A., Jr.; Miura, H.

1976-01-01

It is shown that efficient structural synthesis capabilities can be created by using approximation concepts to mesh finite element structural analysis methods with nonlinear mathematical programming techniques. The history of the application of mathematical programming techniques to structural design optimization problems is reviewed. Several rather general approximation concepts are described along with the technical foundations of the ACCESS 1 computer program, which implements several approximation concepts. A substantial collection of structural design problems involving truss and idealized wing structures is presented. It is concluded that since the basic ideas employed in creating the ACCESS 1 program are rather general, its successful development supports the contention that the introduction of approximation concepts will lead to the emergence of a new generation of practical and efficient, large scale, structural synthesis capabilities in which finite element analysis methods and mathematical programming algorithms will play a central role.

Taking Care of the Small Computer: A Guide for Librarians.

ERIC Educational Resources Information Center

Williams, Gene

1986-01-01

Describes how to identify microcomputer problems and determine whether the services of a technician are required by troubleshooting, or using a process of elimination, without needing a technical background or special tools. Prevention methods and the use of diagnostic programs are also explained. (EM)

Development and Adoption of a Watershed Approach to Compensatory Mitigation: Experiences in Colorado and California

EPA Science Inventory

In this article, we examine the adoption of the watershed approach and its technical methods into regulatory programs in Colorado and California. Specific steps and motives for the adoption are explained. Through close collaboration, regulators have systematically been made aware...

Research Visibility: Preparation of Professional Personnel for Vocational Education.

ERIC Educational Resources Information Center

Brandon, George L., Ed.

1969-01-01

Sixteen reviews in this issue pertain to the preparation of professional personnel for vocational education. Topics under "Seminars and Workshops" include implementing the project method in distributive education, an off-farm agriculture workshop, innovative technical teacher education programs, a national vocational teacher education seminar, and…

Heuristic Classification. Technical Report Number 12.

ERIC Educational Resources Information Center

Clancey, William J.

A broad range of well-structured problems--embracing forms of diagnosis, catalog selection, and skeletal planning--are solved in expert computer systems by the method of heuristic classification. These programs have a characteristic inference structure that systematically relates data to a pre-enumerated set of solutions by abstraction, heuristic…

Local Technical Assistance Program Field Manual

DOT National Transportation Integrated Search

1997-02-01

The FHWA Local Technical Assistance Program (LTAP) provides technology transfer products to local highway departments. One of the most valuable and well-received resources of the program, the LTAP (or T 2 ) centers, have proven themselves invaluable ...

75 FR 61121 - Trade Adjustment Assistance for Farmers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

... program, may apply for technical training and cash benefits by completing and submitting a written... technical assistance training under the program in order to be eligible for cash benefits. Producers.... After submitting a completed application, producers may receive technical assistance at no cost and cash...

77 FR 60140 - Notice of Proposed Information Collection; Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... renewed approval for the collection of information for two technical training program course effectiveness... of information contained in two technical training program course effectiveness evaluation forms. OSM... days in which to comment on the following information collection activities: Title: Technical Training...

THE OFFICE OF AEROSPACE RESEARCH SCIENTIFIC AND TECHNICAL INFORMATION PROGRAM

DTIC Science & Technology

The document outlines the mission and organization of the Office of Aerospace Research (OAR), then describes how its principal product, scientific...effective technical information program, are documented by examples. The role of the Office of Scientific and Technical Information within OAR as performed

Summary of Technical Operations, 1991

DTIC Science & Technology

1992-01-01

exploit commonality. The project is using the Feature-Oriented Domain Analysis ( FODA ) method, developed by the project in 1990, to perform this...the development of new movement control software. The analysis will also serve as a means of improving the FODA method. The results of this analysis ...STARS environment. The NASA Program Office has officially decided to expand the use of Rate Monotonic Analysis (RMA), which was originally isolated to

An evaluation of client satisfaction with training programs and technical assistance provided by Florida's Coordinated School Health Program Office.

PubMed

Weiler, R M; Pigg, R M

2000-11-01

Client or customer satisfaction surveys assess the perceived quality of programs, products, services, and employee performance. Such assessments prove beneficial for evaluation and planning purposes. This survey examined the satisfaction of clients using the programs, services, and technical assistance provided through the Coordinated School Health Program Office (CSHPO) in the Florida Department of Education. Using the 42-item Client Satisfaction Survey, data were collected in summer 1999 from 300 of 574 clients (52.3%) who attended training sessions or sought technical assistance from CSHPO during 1996-1999. More than two-thirds (67.2%) of clients rated the training program as "very good" or "excellent" at increasing their understanding about the concept of a coordinated school health program. Overall, 69.7% of clients rated the training programs they attended as "very good" or "excellent." Resource materials and staff effectiveness rated positively as well. Findings confirmed client satisfaction with CSHPO's training programs, technical assistance, and staff. Information obtained through the client satisfaction survey can be used by CSHPO to assist in future program planning and resource allocations.

Review of Technical Studies in the United States in Support of Burnup Credit Regulatory Guidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, John C; Parks, Cecil V; Mueller, Don

2010-01-01

Taking credit for the reduction in reactivity associated with fuel depletion can enable more cost-effective, higher-density storage, transport, disposal, and reprocessing of spent nuclear fuel (SNF) while maintaining sufficient subcritical margin to establish an adequate safety basis. Consequently, there continues to be considerable interest in the United States (U.S.), as well as internationally, in the increased use of burnup credit in SNF operations, particularly related to storage, transport, and disposal of commercial SNF. This interest has motivated numerous technical studies related to the application of burnup credit, both domestically and internationally, as well as the design of SNF storage, transportmore » and disposal systems that rely on burnup credit for maintaining subcriticality. Responding to industry requests and needs, the U.S. Nuclear Regulatory Commission (NRC) initiated a burnup credit research program in 1999, with support from the Oak Ridge National Laboratory (ORNL), to develop regulatory guidance and the supporting technical bases for allowing and expanding the use of burnup credit in pressurized-water reactor SNF storage and transport applications. Although this NRC research program has not been continuous since its inception, considerable progress has been achieved in many key areas in terms of increased understanding of relevant phenomena and issues, availability of relevant information and data, and subsequently updated regulatory guidance for expanded use of burnup credit. This paper reviews technical studies performed by ORNL for the U.S. NRC burnup credit research program. Examples of topics include reactivity effects associated with reactor operating characteristics, fuel assembly characteristics, burnable absorbers, control rods, spatial burnup distributions, cooling time, and assembly misloading; methods and data for validation of isotopic composition predictions; methods and data for validation of criticality calculations; and operational issues and data related to assembly burnup confirmation. The objective of this paper is to summarize the work and significant accomplishments, with references to the technical reports and publications for complete details, and provide a useful resource to others in the burnup credit community.« less

76 FR 24917 - Notice of Funding Opportunity and Solicitation for Grant Applications (SGA) for H-1B Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... Solicitation for Grant Applications (SGA) for H-1B Technical Skills Training Grants AGENCY: Employment and... million in funds for an H-1B Technical Skills Training Grants program. This grant program is designed to... training. H-1B technical skills training grants are financed by a user fee paid by employers to bring...

USRA/RIACS

NASA Technical Reports Server (NTRS)

Oliger, Joseph

1992-01-01

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on June 6, 1983. RIACS is privately operated by USRA, a consortium of universities with research programs in the aerospace sciences, under a cooperative agreement with NASA. The primary mission of RIACS is to provide research and expertise in computer science and scientific computing to support the scientific missions of NASA ARC. The research carried out at RIACS must change its emphasis from year to year in response to NASA ARC's changing needs and technological opportunities. A flexible scientific staff is provided through a university faculty visitor program, a post doctoral program, and a student visitor program. Not only does this provide appropriate expertise but it also introduces scientists outside of NASA to NASA problems. A small group of core RIACS staff provides continuity and interacts with an ARC technical monitor and scientific advisory group to determine the RIACS mission. RIACS activities are reviewed and monitored by a USRA advisory council and ARC technical monitor. Research at RIACS is currently being done in the following areas: (1) parallel computing; (2) advanced methods for scientific computing; (3) learning systems; (4) high performance networks and technology; and (5) graphics, visualization, and virtual environments. In the past year, parallel compiler techniques and adaptive numerical methods for flows in complicated geometries were identified as important problems to investigate for ARC's involvement in the Computational Grand Challenges of the next decade. We concluded a summer student visitors program during this six months. We had six visiting graduate students that worked on projects over the summer and presented seminars on their work at the conclusion of their visits. RIACS technical reports are usually preprints of manuscripts that have been submitted to research journals or conference proceedings. A list of these reports for the period July 1, 1992 through December 31, 1992 is provided.

Teaching Leadership in Technical Programs at Community Colleges

ERIC Educational Resources Information Center

DeBlauw, Amanda L.; Daugherty, Jenny L.

2017-01-01

This descriptive study explored how community colleges are teaching leadership in technical programs. Leadership education curricular offerings were identified via a survey and selected programs reviewed. 68 Deans, Directors, or Chairpersons of a Business, Management, or Technology program completed the survey, representing 61 community colleges.…

A method for building evaluation competency among community-based organizations.

PubMed

Kelly, Cheryl M; LaRose, Jessi; Scharff, Darcell P

2014-05-01

Community-based organizations often lack the capacity (e.g., time, staff, skills) to effectively evaluate programs, policies, and environmental changes. Providing evaluation technical assistance and training can be an effective and feasible way to build individual evaluation competency. The purpose of this article is to present a practical approach and related tools that can be used by evaluators and others (e.g., academic partners, funders) providing assistance to build evaluation skills in community organizations. The approach described was developed in collaboration with local universities and a regional health foundation to provide intensive technical support to 19 community-based organizations awarded funding to implement obesity prevention projects. Technical assistance processes and tools were designed to be tailored to organizations' capacity and needs and can be used as templates by others who provide technical assistance. Evaluators, funders, and academic partners can use lessons learned from this experience to help shape and implement evaluation technical assistance approaches with community-based organizations.

Water-oil separation performance of technical textiles used for marine pollution disasters.

PubMed

Seddighi, Mahdi; Hejazi, Sayyed Mahdi

2015-07-15

Oil is principally one of the most important energy sources in the world. However, as long as oil is explored and transported for being used, there will be the risk of the spillage into the marine environment. The use of technical textiles, i.e. fibrous beds, is a conventional separation technique for oil/water emulsion since it is efficient and easy to design. In this paper, the recovery of oil by technical textiles was mathematically modeled based on the structural parameters of textile and the capillary mechanism. Eleven types of commercial technical textiles with different properties were prepared for the experimental program. The experimental design included fiber type (polypropylene and polyester), fabric type (woven and/or nonwoven), fabric thickness and fabric areal density. Consequently, the absorption capacities of different technical textile samples were derived by the use of theoretical and experimental methods. The results show that there is a well fitness between theoretical outputs and experimental data. Copyright © 2015 Elsevier Ltd. All rights reserved.

Technical Packages in Injury and Violence Prevention to Move Evidence into Practice: Systematic Reviews and Beyond

PubMed Central

Haegerich, Tamara M.; David-Ferdon, Corinne; Noonan, Rita K.; Manns, Brian J.; Billie, Holly C.

2016-01-01

Injury and violence prevention strategies have greater potential for impact when they are based on scientific evidence. Systematic reviews of the scientific evidence can contribute key information about which policies and programs might have the greatest impact when implemented. However, systematic reviews have limitations, such as lack of implementation guidance and contextual information, that can limit the application of knowledge. “Technical packages,” developed by knowledge brokers such as the federal government, nonprofit agencies, and academic institutions, have the potential to be an efficient mechanism for making information from systematic reviews actionable. Technical packages provide information about specific evidence-based prevention strategies, along with the estimated costs and impacts, and include accompanying implementation and evaluation guidance to facilitate adoption, implementation, and performance measurement. We describe how systematic reviews can inform the development of technical packages for practitioners, provide examples of technical packages in injury and violence prevention, and explain how enhancing review methods and reporting could facilitate the use and applicability of scientific evidence. PMID:27604301

Vocational Teacher Education at Ferris State College: Product of Constant Evaluation and Revision

ERIC Educational Resources Information Center

Storm, George

1974-01-01

The trade-technical education program at Ferris State College, Big Rapids, Michigan, is reviewed. The curriculum of the college, its intern programs, and the teacher preparation technical programs are described. (DS)

Jim Starnes' Contributions to Residual Strength Analysis Methods for Metallic Structures

NASA Technical Reports Server (NTRS)

Young, Richard D.; Rose, Cheryl A.; Harris, Charles E.

2005-01-01

A summary of advances in residual strength analyses methods for metallic structures that were realized under the leadership of Dr. James H. Starnes, Jr., is presented. The majority of research led by Dr. Starnes in this area was conducted in the 1990's under the NASA Airframe Structural Integrity Program (NASIP). Dr. Starnes, respectfully referred to herein as Jim, had a passion for studying complex response phenomena and dedicated a significant amount of research effort toward advancing damage tolerance and residual strength analysis methods for metallic structures. Jim's efforts were focused on understanding damage propagation in built-up fuselage structure with widespread fatigue damage, with the goal of ensuring safety in the aging international commercial transport fleet. Jim's major contributions in this research area were in identifying the effects of combined internal pressure and mechanical loads, and geometric nonlinearity, on the response of built-up structures with damage. Analytical and experimental technical results are presented to demonstrate the breadth and rigor of the research conducted in this technical area. Technical results presented herein are drawn exclusively from papers where Jim was a co-author.

Cooperative and Concurrent Enrollment and College Retention

ERIC Educational Resources Information Center

Foster, Regina

2010-01-01

Oklahoma has a unique system of high schools, technology centers and community colleges that work together to enable students to receive education in technical areas. Given Oklahoma's shortage of technical degree recipients, the Cooperative Alliance Program (CAP) was developed to encourage additional students to begin technical programs during…

25 CFR 170.170 - How are Indian LTAP centers managed?

Code of Federal Regulations, 2010 CFR

2010-04-01

... ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Indian Local Technical Assistance... Center Director and staff, with the advice of its technical panel under the Indian LTAP agreements. FHWA... technical panel consisting of one BIA Regional Road Engineer, one FHWA representative, one state DOT...

Integrated Data Collection Analysis (IDCA) Program — IDCA Quarterly Program Review, September 14 and 15, 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandstrom, Mary M.; Brown, Geoffrey W.; Warner, Kirstin F.

The IDCA conducted a program review at Los Alamos National Laboratory, September 14 and 15, 2010. The review was divided into three parts: 1) an update on the current status of the program, 2) an information exchange and discussion on technical details for current issues and future planning, and 3) a tour of the SSST testing facilities at LANL. The meeting started with an update from DHS by Laura Parker and a restating of some of the objectives of the Proficiency Test of which the IDCA is currently engaged. This update was followed by a discussion of some high levelmore » programmatic issues particularly about ways of communicating the overall goals of the IDCA to non-technical representatives. The final topic focused on the difficulty of releasing information, including the DHS approval process, ITAR, and open publication. Next JGR presented a technical summary of accomplishments, schedule, milestones, and future directions. These key points made were: 1) about 1/3 of the materials have been tested, 2) some participants are behind others causing a lag in report writing, 3) method reports have been assigned to various participants to speed up the process of reporting, 4) the SSST Compendium needs reformatting and restructuring, and 5) the Compendium needs a web site to house with access control. After the technical update, some of the Proficiency Test results were shown comparing data from the various laboratories. These results included comparisons of the RDX standard, KC/sugar mixtures (-100 mesh and as received), KC/dodecane, KP/Al, and KP/C. Impact, friction, ESD, and DSC results were the focus. All the participants were involved in these discussions. This report includes summary notes, presentations, and explanatory information.« less

Vector control activities: Fiscal Year, 1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-04-01

The program is divided into two major components - operations and support studies. The support studies are designed to improve the operational effectiveness and efficiency of the control program and to identify other vector control problems requiring TVA attention and study. Nonchemical methods of control are emphasized and are supplemented with chemical measures as needed. TVA also cooperates with various concerned municipalities in identifying blood-sucking arthropod pest problems and demonstrating control techniques useful in establishing abatement programs, and provides technical assistance to other TVA programs and organizations. The program also helps Land Between The Lakes (LBL) plan and conduct vectormore » control operations and tick control research. Specific program control activities and support studies are discussed.« less

Linking Reflection and Technical Competence: The Logbook as an Instrument in Teacher Education.

ERIC Educational Resources Information Center

Korthagen, Fred A. J.

1999-01-01

Describes a framework for integrating reflection and teacher competency development into teacher education programs, introducing a spiral model for reflection, standard reflection questions, and a method of structuring logbooks, all designed to develop a competency for self-directed professional growth in interpersonal classroom behavior. An…

"May I Help You." A Business Response to a Deaf Community.

ERIC Educational Resources Information Center

Arthur, Larry; And Others

1980-01-01

To sensitize hearing people to the experience of deafness and to teach them methods of communicating with the hearing impaired, Rochester Institute of Technology and the National Technical Institute for the Deaf planned and delivered a program with the cooperation of merchants at an area shopping center. (SK)

Development of a method to evaluate the technical and environmental feasibility of particular pollution prevention opportunities.

DOT National Transportation Integrated Search

2000-06-01

The Virginia Department of Transportation (VDOT) is obligated by House Joint Resolution 453 passed in 1995 by Virginia's General Assembly to develop and implement a pollution prevention (P2) program. The primary purpose of this study was to develop a...

Looking at Learning as Preparation for Teaching

ERIC Educational Resources Information Center

Hughes-McDonnell, Fiona J.

2016-01-01

One of the more heated and consequential debates in teacher education today concerns the instructional methods used in preparation programs and the knowledge and skills that teacher candidates should acquire. In this study, I examine looking at learning as a pedagogical approach to transition teacher candidates from the technical conceptions of…

Organizational Considerations for Implementing Systems Engineering and Integration in the Ares Projects Office

NASA Technical Reports Server (NTRS)

Thomas, LeAnn; Doreswamy, Rajiv N.

2008-01-01

Systems Engineering and Integration (SE&I) is a critical discipline in developing new space systems. In 2005, NASA performed an internal study of 24 agency and Department of Defense (DoD) programs to evaluate methods of integrating SE&I practices and determine their effectiveness. The goal of the study was to determine the best SE&I implementation strategy for the Ares Projects Office. The study identified six SE&I organizational structures: 1. Lead systems integrator (LSI) with SE&I responsibility and government technical insight. 2a. Integration contractor with government SE&I responsibility (government insight). 2b. Integration contractor with government SE&I responsibility (government oversight). 3a. Prime contractor with SE&I responsibility (government insight). 3b. Prime contractor with SE&I responsibility (government oversight). 3c. Prime contractor with SE&I responsibility (government/industry partnership). 4a.Prime contractor with government SE&I responsibility (government insight). 4b. Prime contractor with government SE&I responsibility (government oversight). 4d.Prime contractors with total system performance responsibility (TSPR). 5. Prime contractor with government SE&I responsibility and integration products through a Federally Funded Research and Development Center (FFRDC). 6. Government/FFRDC in-house development with SE&I responsibility and function. The organizational structure used most often was number 4, using a prime contractor with government SE&I responsibility and government technical insight. However, data analyses did not establish a positive relationship between program development costs and specific SE&I organizational types, nor did it positively determine the relationship between successful programs or projects and their SE&I structure. The SE&I study reached the following conclusions: (1) Large, long-duration, technically complex programs or projects reach their technical goals, but rarely meet schedule or cost goals. NASA's recent successes have been smaller, short-duration development projects using heritage hardware/software, focused technology development, technical oversight and stable external factors. (2) Programs and projects have failed or been terminated due to lack of technical insight, relaxing of SE&I processes, and unstable external factors. (3) The study did not find a single, clear optimum SE&I organization type to fit all projects. However, while any organizational structure can be made to work, the fewer complexities in the program, the better the likelihood of success. (4) The most common successful SE&I organization structure type in the study was type 4b, where the government maintained integration responsibility, with the prime contractor providing SE&I products and the government providing technical oversight. This study was instrumental in helping the APO select organization structure 4, following the same SE&I and oversight process used during humanlund7s last voyages to the Moon.

Final report : for the period of December 1999 through November 30, 2000 : Florida Transit Training Program (1999/2000) : Florida Technical Assistance Program (1999/2000)

DOT National Transportation Integrated Search

2000-01-01

The following progress report is intended to highlight the significant activities of the Florida Transit Training Program and Florida Technical Assistant Program. The following progress report is intended to highlight the significant activities of th...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2013 CFR

2013-04-01

... storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR... the minimum technical standards for program storage media? (a) Removable program storage media. All removable program storage media must maintain an internal checksum or signature of its contents...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2014 CFR

2014-04-01

... storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR... the minimum technical standards for program storage media? (a) Removable program storage media. All removable program storage media must maintain an internal checksum or signature of its contents...

Blackhawk Technical College Alcohol and Other Drug Abuse Program.

ERIC Educational Resources Information Center

Runnells, Julie

This document describes the Blackhawk Technical College, Wisconsin, drug abuse program provided primarily by an intervention specialist and available to students and employees. Section I outlines the program model (resources, program of services, immediate results and outcomes) in a chart form. Section II describes the services provided by an…

48 CFR 227.7104 - Contracts under the Small Business Innovation Research (SBIR) Program.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Business Innovation Research (SBIR) Program. 227.7104 Section 227.7104 Federal Acquisition Regulations... Innovation Research (SBIR) Program. (a) Use the clause at 252.227-7018, Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program, when technical data or...

48 CFR 227.7104 - Contracts under the Small Business Innovation Research (SBIR) Program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Business Innovation Research (SBIR) Program. 227.7104 Section 227.7104 Federal Acquisition Regulations... Innovation Research (SBIR) Program. (a) Use the clause at 252.227-7018, Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program, when technical data or...

48 CFR 227.7104 - Contracts under the Small Business Innovation Research (SBIR) Program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Business Innovation Research (SBIR) Program. 227.7104 Section 227.7104 Federal Acquisition Regulations... Innovation Research (SBIR) Program. (a) Use the clause at 252.227-7018, Rights in Noncommercial Technical Data and Computer Software—Small Business Innovation Research (SBIR) Program, when technical data or...

75 FR 32858 - Medicare Program; Policy and Technical Changes to the Medicare Advantage and the Medicare...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-10

... Medicare Advantage and the Medicare Prescription Drug Benefit Programs; Corrections AGENCY: Centers for... Advantage and the Medicare Prescription Drug Benefit Programs'' which appeared in the April 15, 2010 Federal... and Technical Changes to the Medicare Advantage and the Medicare Prescription Drug Benefit Programs...

Women and Technical Professions. Leonardo da Vinci Series: Good Practices.

ERIC Educational Resources Information Center

Commission of the European Communities, Brussels (Belgium). Directorate-General for Education and Culture.

This document profiles programs for women in technical professions that are offered through the European Commission's Leonardo da Vinci program. The following programs are profiled: (1) Artemis and Diana (vocational guidance programs to help direct girls toward technology-related careers); (2) CEEWIT (an Internet-based information and…

Maintaining Strategic Relevance: Career & Technical Education Program Discontinuance within California Community Colleges

ERIC Educational Resources Information Center

Fleming, Kevin J.

2014-01-01

The California Community College mission requires offering relevant Career and Technical Education (CTE) programs. Due to program accretion and bureaucratic inertia, program discontinuance (PD) seems at odds with postsecondary culture. Yet, as a result of recent budget constrictions, community colleges are forced to identify effective PD…

A technique for lowering risks during contract negotiations

NASA Technical Reports Server (NTRS)

Lehman, D. H.

1986-01-01

In this day and age of sophisticated weapon and space system procurements, negotiations of the statement of work, technical requirements, and schedule may be as protracted as the negotiation of costs and profit. A major problem facing the program manager during contract negotiations is what affect changes in schedule, technical requirements, and contract terms have on the price. In many instances, after the statement of work has been redrafted, the contractor will be obliged to reprice the work, either on the spot or after a short recess in the negotiations. In this paper, a method for organizing the negotiation process is presented to reduce the risks incurred by the seller. The method is built upon regression analysis and two illustrative examples of its use are provided.

15 CFR 295.11 - Technical and educational services for ATP recipients.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS ADVANCED TECHNOLOGY PROGRAM General § 295.11 Technical and educational services for ATP recipients... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Technical and educational services for...

76 FR 2147 - UAW-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

... Technical Training Center Technology Training Joint Programs Staff, Warren, MI; Notice of Revised... facilities. The information revealed that the technical training provided (such as applied industrial... engaged in employment related to the supply of technical training services, meet the worker group...

76 FR 33332 - Announcement of Funding Awards for the Technical Assistance and Capacity Building under the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... of key Departmental objectives, including but not limited to, energy efficiency and green building... Awards for the Technical Assistance and Capacity Building under the Transformation Initiative Program...) for the Technical Assistance and Capacity Building under the Transformation Initiative program for...

Vocational-Technical Education: A Plan for Monroe County, Florida.

ERIC Educational Resources Information Center

Mills, Hugh L., Sr., Ed.; Pilcher, Palmer, C., Ed.

Suggested vocational-technical education programs for the Monroe County Florida school system are presented along with recommendations to implement the principle of coordinated career education in the public schools. Expansion of vocational-technical programs is emphasized to expose all students from kindergarten through Grade 12 to career…

75 FR 19297 - Energy Conservation Program: Public Meeting and Availability of the Preliminary Technical Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... Conservation Program: Public Meeting and Availability of the Preliminary Technical Support Document for Walk-In... and availability of the preliminary technical support document regarding energy conservation standards..., the deadline for requesting to speak at the public meeting, and the deadline for submitting written...

75 FR 9608 - National Protection and Programs Directorate; Technical Assistance Request and Evaluation

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-03

... Directorate; Technical Assistance Request and Evaluation AGENCY: National Protection and Programs Directorate... assistance requests from each State and territory. OEC will use the Technical Assistance Evaluation Form to... electronically. Evaluation forms may be submitted electronically or in paper form. The Office of Management and...

Preparing Workforce 2000 through Vocational Technical 2+2 Programs.

ERIC Educational Resources Information Center

Portland Area Vocational-Technical Education Consortium, OR.

An overview is provided of the 1989 accomplishments of the Portland Area Vocational Technical Education Consortium (PAVTEC), which was created to strengthen partnerships between Portland Community College (PCC) and local high schools to provide high quality articulated vocational-technical programs. The first section looks at the roles of PAVTEC,…

40 CFR 52.744 - Small business stationary source technical and environmental compliance assistance program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Small business stationary source technical and environmental compliance assistance program. 52.744 Section 52.744 Protection of Environment... PLANS Illinois> § 52.744 Small business stationary source technical and environmental compliance...

40 CFR 52.798 - Small business stationary source technical and environmental compliance assistance program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Small business stationary source technical and environmental compliance assistance program. 52.798 Section 52.798 Protection of Environment... PLANS Indiana § 52.798 Small business stationary source technical and environmental compliance...

An Overview of Clarkson's Technical Communications Program.

ERIC Educational Resources Information Center

Barkman, Patricia R.

The technical communications program at Clarkson College (New York) offers students 23 courses in subjects ranging from interpersonal behavior to engineering and scientific report writing to computer documentation and the development of technical manuals. With the help of an advisor, each student works out a course of study appropriate to his or…

An Analysis of National Surveys: Associate Degree Programs in Manufacturing Engineering and Related Programs. A Preliminary Report.

ERIC Educational Resources Information Center

Mathias, Elizabeth A.

In 1993, a study was conducted to investigate the responses of associate degree programs in manufacturing and related technical programs to current technical education initiatives. The study focused on the relationships of associate degree programs to secondary and postsecondary education and industry, curricular trends, familiarity with the…

Evaluation of the Radiography Program at Caldwell Community College and Technical Institute--Summer, 1982.

ERIC Educational Resources Information Center

Pipes, V. David

As part of a periodic evaluation of the occupational programs at Caldwell Community College and Technical Institute (CCC&TI), a study of the radiography program was conducted to collect information to facilitate planning, aid in program improvement, and meet accountability demands. The specific objectives of the program evaluation were to…

Curriculum Programs in Action, Their Administration and Evaluation; Report of a Conference Devoted to Description, Demonstration, and Evaluative Discussions of Innovative Programs in Vocational-Technical Education.

ERIC Educational Resources Information Center

San Francisco State Coll., CA. Center for Technological Education.

The presentation, review and evaluation of innovative vocational-technical curriculums in operation was the major function of a San Francisco conference sponsored jointly by the Center for Technical Education at San Francisco State College and the Center for Studies in Vocational and Technical Education at the University of Wisconsin. Major…

Applications of numerical optimization methods to helicopter design problems: A survey

NASA Technical Reports Server (NTRS)

Miura, H.

1984-01-01

A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

Applications of numerical optimization methods to helicopter design problems - A survey

NASA Technical Reports Server (NTRS)

Miura, H.

1985-01-01

A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

Applications of numerical optimization methods to helicopter design problems - A survey

NASA Technical Reports Server (NTRS)

Miura, H.

1984-01-01

A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

Training NOAA Staff on Effective Communication Methods with Local Climate Users

NASA Astrophysics Data System (ADS)

Timofeyeva, M. M.; Mayes, B.

2011-12-01

Since 2002 NOAA National Weather Service (NWS) Climate Services Division (CSD) offered training opportunities to NWS staff. As a result of eight-year-long development of the training program, NWS offers three training courses and about 25 online distance learning modules covering various climate topics: climate data and observations, climate variability and change, NWS national and local climate products, their tools, skill, and interpretation. Leveraging climate information and expertise available at all NOAA line offices and partners allows delivery of the most advanced knowledge and is a very critical aspect of the training program. NWS challenges in providing local climate services includes effective communication techniques on provide highly technical scientific information to local users. Addressing this challenge requires well trained, climate-literate workforce at local level capable of communicating the NOAA climate products and services as well as provide climate-sensitive decision support. Trained NWS climate service personnel use proactive and reactive approaches and professional education methods in communicating climate variability and change information to local users. Both scientifically-unimpaired messages and amiable communication techniques such as story telling approach are important in developing an engaged dialog between the climate service providers and users. Several pilot projects NWS CSD conducted in the past year applied the NWS climate services training program to training events for NOAA technical user groups. The technical user groups included natural resources managers, engineers, hydrologists, and planners for transportation infrastructure. Training of professional user groups required tailoring the instructions to the potential applications of each group of users. Training technical user identified the following critical issues: (1) Knowledge of target audience expectations, initial knowledge status, and potential use of climate information; (2) Leveraging partnership with climate services providers; and, (3) Applying 3H training approach, where the first H stands for Head (trusted science), the second H stands for Heart (make it easy), and the third H for Hand (support with applications).

Farmer Participation in U.S. Farm Bill Conservation Programs

NASA Astrophysics Data System (ADS)

Reimer, Adam P.; Prokopy, Linda S.

2014-02-01

Conservation policy in agricultural systems in the United States relies primarily on voluntary action by farmers. Federal conservation programs, including the Environmental Quality Incentives Program, offer incentives, both financial and technical, to farmers in exchange for adoption of conservation practices. Understanding motivations for (as well as barriers to) participation in voluntary programs is important for the design of future policy and effective outreach. While a significant literature has explored motivations and barriers to conservation practice adoption and participation in single programs, few studies in the U.S. context have explored general participation by farmers in one place and time. A mixed-methods research approach was utilized to explore farmer participation in all U.S. Farm Bill programs in Indiana. Current and past program engagement was high, with nearly half of survey respondents reporting participation in at least one program. Most participants had experience with the Conservation Reserve Program, with much lower participation rates in other programs. Most interview participants who had experience in programs were motivated by the environmental benefits of practices, with incentives primarily serving to reduce the financial and technical barriers to practice adoption. The current policy arrangement, which offers multiple policy approaches to conservation, offers farmers with different needs and motivations a menu of options. However, evidence suggests that the complexity of the system may be a barrier that prevents participation by farmers with scarce time or resources. Outreach efforts should focus on increasing awareness of program options, while future policy must balance flexibility of programs with complexity.

NASA Engineering Excellence: A Case Study on Strengthening an Engineering Organization

NASA Technical Reports Server (NTRS)

Shivers, C. Herbert; Wessel, Vernon W.

2006-01-01

NASA implemented a system of technical authority following the Columbia Accident Investigation Board (CAE) report calling for independent technical authority to be exercised on the Space Shuttle Program activities via a virtual organization of personnel exercising specific technical authority responsibilities. After the current NASA Administrator reported for duty, and following the first of two planned "Shuttle Return to Flight" missions, the NASA Chief Engineer and the Administrator redirected the Independent Technical Authority to a program of Technical Excellence and Technical Authority exercised within the existing engineering organizations. This paper discusses the original implementation of technical authority and the transition to the new implementation of technical excellence, including specific measures aimed at improving safety of future Shuttle and space exploration flights.

U.S. Air Force Scientific and Technical Information Program - The STINFO Program

NASA Technical Reports Server (NTRS)

Blados, Walter R.

1991-01-01

The U.S. Air Force STINFO (Scientific and Technical Information) program has as its main goal the proper use of all available scientific and technical information in the development of programs. The organization of STINFO databases, the use of STINFO in the development and advancement of aerospace science and technology and the acquisition of superior systems at lowest cost, and the application to public and private sectors of technologies developed for military uses are examined. STINFO user training is addressed. A project for aerospace knowledge diffusion is discussed.

Launch Vehicle Design and Optimization Methods and Priority for the Advanced Engineering Environment

NASA Technical Reports Server (NTRS)

Rowell, Lawrence F.; Korte, John J.

2003-01-01

NASA's Advanced Engineering Environment (AEE) is a research and development program that will improve collaboration among design engineers for launch vehicle conceptual design and provide the infrastructure (methods and framework) necessary to enable that environment. In this paper, three major technical challenges facing the AEE program are identified, and three specific design problems are selected to demonstrate how advanced methods can improve current design activities. References are made to studies that demonstrate these design problems and methods, and these studies will provide the detailed information and check cases to support incorporation of these methods into the AEE. This paper provides background and terminology for discussing the launch vehicle conceptual design problem so that the diverse AEE user community can participate in prioritizing the AEE development effort.

A study on industrial accident rate forecasting and program development of estimated zero accident time in Korea.

PubMed

Kim, Tae-gu; Kang, Young-sig; Lee, Hyung-won

2011-01-01

To begin a zero accident campaign for industry, the first thing is to estimate the industrial accident rate and the zero accident time systematically. This paper considers the social and technical change of the business environment after beginning the zero accident campaign through quantitative time series analysis methods. These methods include sum of squared errors (SSE), regression analysis method (RAM), exponential smoothing method (ESM), double exponential smoothing method (DESM), auto-regressive integrated moving average (ARIMA) model, and the proposed analytic function method (AFM). The program is developed to estimate the accident rate, zero accident time and achievement probability of an efficient industrial environment. In this paper, MFC (Microsoft Foundation Class) software of Visual Studio 2008 was used to develop a zero accident program. The results of this paper will provide major information for industrial accident prevention and be an important part of stimulating the zero accident campaign within all industrial environments.

Markovian Monte Carlo program EvolFMC v.2 for solving QCD evolution equations

NASA Astrophysics Data System (ADS)

Jadach, S.; Płaczek, W.; Skrzypek, M.; Stokłosa, P.

2010-02-01

We present the program EvolFMC v.2 that solves the evolution equations in QCD for the parton momentum distributions by means of the Monte Carlo technique based on the Markovian process. The program solves the DGLAP-type evolution as well as modified-DGLAP ones. In both cases the evolution can be performed in the LO or NLO approximation. The quarks are treated as massless. The overall technical precision of the code has been established at 5×10. This way, for the first time ever, we demonstrate that with the Monte Carlo method one can solve the evolution equations with precision comparable to the other numerical methods. New version program summaryProgram title: EvolFMC v.2 Catalogue identifier: AEFN_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFN_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including binary test data, etc.: 66 456 (7407 lines of C++ code) No. of bytes in distributed program, including test data, etc.: 412 752 Distribution format: tar.gz Programming language: C++ Computer: PC, Mac Operating system: Linux, Mac OS X RAM: Less than 256 MB Classification: 11.5 External routines: ROOT ( http://root.cern.ch/drupal/) Nature of problem: Solution of the QCD evolution equations for the parton momentum distributions of the DGLAP- and modified-DGLAP-type in the LO and NLO approximations. Solution method: Monte Carlo simulation of the Markovian process of a multiple emission of partons. Restrictions:Limited to the case of massless partons. Implemented in the LO and NLO approximations only. Weighted events only. Unusual features: Modified-DGLAP evolutions included up to the NLO level. Additional comments: Technical precision established at 5×10. Running time: For the 10 6 events at 100 GeV: DGLAP NLO: 27s; C-type modified DGLAP NLO: 150s (MacBook Pro with Mac OS X v.10.5.5, 2.4 GHz Intel Core 2 Duo, gcc 4.2.4, single thread).

77 FR 37284 - Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

... DEPARTMENT OF LABOR Office of Workers' Compensation Programs 20 CFR Parts 701, 702, 703, 725, and 726 RIN 1240-AA05 Technical Amendments AGENCY: Office of Workers' Compensation Programs, Labor. ACTION: Final rule. SUMMARY: The Office of Workers' Compensation Programs is making [[Page 37285

Solid Waste Program technical baseline description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

Compiling the space shuttle wind tunnel data base: An exercise in technical and managerial innovators

NASA Technical Reports Server (NTRS)

Kemp, N. D.

1983-01-01

Engineers evaluating Space Shuttle flight data and performance results are using a massive data base of wind tunnel test data. A wind tunnel test data base of the magnitude attained is a major accomplishment. The Apollo program spawned an automated wind tunnel data analysis system called SADSAC developed by the Chrysler Space Division. An improved version of this system renamed DATAMAN was used by Chrysler to document analyzed wind tunnel data and data bank the test data in standardized formats. These analysis documents, associated computer graphics and standard formatted data were disseminated nationwide to the Shuttle technical community. These outputs became the basis for substantiating and certifying the flight worthiness of the Space Shuttle and for improving future designs. As an aid to future programs this paper documents the lessons learned in compiling the massive wind tunnel test data base for developing the Space Shuttle. In particular, innovative managerial and technical concepts evolved in the course of conceiving and developing this successful DATAMAN system and the methods and organization for applying the system are presented.

Effects of Occupational Education Programs Offered by the Oklahoma Department of Career and Technology Education, Skills Centers Division, on the Recidivism Rate of Selected Groups of Released Offenders in Oklahoma

ERIC Educational Resources Information Center

Ely, Joseph William

2012-01-01

Scope and Method of Study: The purpose of this study was to describe the effects of career and technical education (CTE) on recidivism for offenders enrolled in the Oklahoma Department of Corrections CareerTech Skills Center School Systems (SCSS) programs. Specifically, the study mined existing CareerTech and ODOC data to: (a) compare the…

NASA-UVA light aerospace alloy and structures technology program

NASA Technical Reports Server (NTRS)

Gangloff, Richard P.; Haviland, John K.; Herakovich, Carl T.; Pilkey, Walter D.; Pindera, Marek-Jerzy; Stoner, Glenn E.; Swanson, Robert E.; Thornton, Earl A.; Wawner, Franklin E., Jr.; Wert, John A.

1990-01-01

The objective of the Light Aerospace Alloy and Structures Technology Program is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys, composites, and associated thermal gradient structures. Individual technical objectives are established for each project. Efforts aim to produce basic understanding of material behavior, monolithic and composite alloys, processing methods, solid and mechanics analyses, measurement advances, and a pool of educated graduate students. Progress is reported for 11 areas of study.

Guidelines for Implementation of an Advanced Outage Control Center to Improve Outage Coordination, Problem Resolution, and Outage Risk Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

St. Germain, Shawn W.; Farris, Ronald K.; Whaley, April M.

This research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which is a research and development (R&D) program sponsored by Department of Energy (DOE) and performed in close collaboration with industry R&D programs that provide the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. The LWRS program serves to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The purpose of this research is to improve management of nuclear powermore » plant (NPP) outages through the development of an advanced outage control center (AOCC) that is specifically designed to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. This technical report for industry implementation outlines methods and considerations for the establishment of an AOCC. This report provides a process for implementation of a change management plan, evaluation of current outage processes, the selection of technology, and guidance for the implementation of the selected technology. Methods are presented for both adoption of technologies within an existing OCC and for a complete OCC replacement, including human factors considerations for OCC design and setup.« less

RIACS/USRA

NASA Technical Reports Server (NTRS)

Oliger, Joseph

1993-01-01

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on 6 June 1983. RIACS is privately operated by USRA, a consortium of universities with research programs in the aerospace sciences, under contract with NASA. The primary mission of RIACS is to provide research and expertise in computer science and scientific computing to support the scientific missions of NASA ARC. The research carried out at RIACS must change its emphasis from year to year in response to NASA ARC's changing needs and technological opportunities. A flexible scientific staff is provided through a university faculty visitor program, a post doctoral program, and a student visitor program. Not only does this provide appropriate expertise but it also introduces scientists outside of NASA to NASA problems. A small group of core RIACS staff provides continuity and interacts with an ARC technical monitor and scientific advisory group to determine the RIACS mission. RIACS activities are reviewed and monitored by a USRA advisory council and ARC technical monitor. Research at RIACS is currently being done in the following areas: Parallel Computing, Advanced Methods for Scientific Computing, High Performance Networks and Technology, and Learning Systems. Parallel compiler techniques, adaptive numerical methods for flows in complicated geometries, and optimization were identified as important problems to investigate for ARC's involvement in the Computational Grand Challenges of the next decade.

NASA Handbook for Spacecraft Structural Dynamics Testing

NASA Technical Reports Server (NTRS)

Kern, Dennis L.; Scharton, Terry D.

2005-01-01

Recent advances in the area of structural dynamics and vibrations, in both methodology and capability, have the potential to make spacecraft system testing more effective from technical, cost, schedule, and hardware safety points of view. However, application of these advanced test methods varies widely among the NASA Centers and their contractors. Identification and refinement of the best of these test methodologies and implementation approaches has been an objective of efforts by the Jet Propulsion Laboratory on behalf of the NASA Office of the Chief Engineer. But to develop the most appropriate overall test program for a flight project from the selection of advanced methodologies, as well as conventional test methods, spacecraft project managers and their technical staffs will need overall guidance and technical rationale. Thus, the Chief Engineer's Office has recently tasked JPL to prepare a NASA Handbook for Spacecraft Structural Dynamics Testing. An outline of the proposed handbook, with a synopsis of each section, has been developed and is presented herein. Comments on the proposed handbook are solicited from the spacecraft structural dynamics testing community.

NASA Handbook for Spacecraft Structural Dynamics Testing

NASA Technical Reports Server (NTRS)

Kern, Dennis L.; Scharton, Terry D.

2004-01-01

Recent advances in the area of structural dynamics and vibrations, in both methodology and capability, have the potential to make spacecraft system testing more effective from technical, cost, schedule, and hardware safety points of view. However, application of these advanced test methods varies widely among the NASA Centers and their contractors. Identification and refinement of the best of these test methodologies and implementation approaches has been an objective of efforts by the Jet Propulsion Laboratory on behalf of the NASA Office of the Chief Engineer. But to develop the most appropriate overall test program for a flight project from the selection of advanced methodologies, as well as conventional test methods, spacecraft project managers and their technical staffs will need overall guidance and technical rationale. Thus, the Chief Engineer's Office has recently tasked JPL to prepare a NASA Handbook for Spacecraft Structural Dynamics Testing. An outline of the proposed handbook, with a synopsis of each section, has been developed and is presented herein. Comments on the proposed handbook is solicited from the spacecraft structural dynamics testing community.

Probabilistic structural analysis methods for space propulsion system components

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1986-01-01

The development of a three-dimensional inelastic analysis methodology for the Space Shuttle main engine (SSME) structural components is described. The methodology is composed of: (1) composite load spectra, (2) probabilistic structural analysis methods, (3) the probabilistic finite element theory, and (4) probabilistic structural analysis. The methodology has led to significant technical progress in several important aspects of probabilistic structural analysis. The program and accomplishments to date are summarized.

Probabilistic Structural Analysis Methods (PSAM) for select space propulsion systems components

NASA Technical Reports Server (NTRS)

1991-01-01

Summarized here is the technical effort and computer code developed during the five year duration of the program for probabilistic structural analysis methods. The summary includes a brief description of the computer code manuals and a detailed description of code validation demonstration cases for random vibrations of a discharge duct, probabilistic material nonlinearities of a liquid oxygen post, and probabilistic buckling of a transfer tube liner.

Technical Excellence: A Requirement for Good Engineering

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2008-01-01

Technical excellence is a requirement for good engineering. Technical excellence has many different ways of expressing itself within engineering. NASA has initiatives that address the enhancement of the Agency's technical excellence and thrust to maintain the associated high level of performance by the Agency on current programs/projects and as it moves into the Constellation Program and the return to the Moon with plans to visit Mars. This paper addresses some of the key initiatives associated with NASA's technical excellence thrust. Examples are provided to illustrate some results being achieved and plans to enhance these initiatives.

From Industry to Teaching: The Quality Instruction Program at Hocking Technical College.

ERIC Educational Resources Information Center

Moran, Ralph; And Others

This presentation on Hocking Technical College's (HTC's) Quality Instruction Program (QIP) provides a program description and comments from three HTC faculty members who have been involved in the program in various ways. Recognizing that many faculty members are hired on the basis of their industrial credentials rather than their teaching…

Report on Occupational/Technical Programs at Piedmont Virginia Community College. Research Report No. 2-96.

ERIC Educational Resources Information Center

Head, Ronald B.

Part of an annual review of occupational/technical programs at Piedmont Virginia Community College (PVCC), this report describes enrollment, graduation, and placement outcomes for PVCC's Associate of Applied Science and certificate programs. Following an executive summary and introduction, the report presents data on program outcomes related to…

48 CFR 301.607-78 - Contracting Officer designation of a Program/Project Manager as the Contracting Officer's...

Code of Federal Regulations, 2010 CFR

2010-10-01

... designation of a Program/Project Manager as the Contracting Officer's Technical Representative. 301.607-78... Contracting Officer designation of a Program/Project Manager as the Contracting Officer's Technical... acquisition. However, for those individuals serving as a Program or Project Manager under a FAC-P/PM...

75 FR 47573 - Career and Technical Education Program-Promoting Rigorous Career and Technical Education Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... program is to use 10 key components based on the ``Program of Study Design Framework'' [[Page 47574...., the States' Career Clusters \\2\\), and offer students the opportunities to earn postsecondary credits... extent to which students are attaining necessary knowledge and skills, we agree that administrators...

78 FR 43091 - Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Administration 14 CFR Part 193 [Docket No.: FAA-2013-0375] Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP) AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Notice of Proposed Order Designating Safety Information as Protected from...

A Comprehensive Review of Selected Business Programs in Community Colleges and Area Vocational-Technical Centers. Program Review Report.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

In 1988, a review was conducted of the business component of associate in arts and associate in science (AS) degree programs, and of the certificate programs in business in Florida community colleges and area vocational-technical centers. Focusing primarily on business programs in marketing, general business management, and small business…

Texas Higher Education Coordinating Board 2000 Statewide Annual Licensure Report.

ERIC Educational Resources Information Center

Texas Higher Education Coordinating Board, Austin. Div. of Community and Technical Colleges.

This report provides the licensure examination results for two-year technical associate degrees and one-year certificate programs at community and technical colleges in Texas. The Texas Higher Education Coordinating Board recognizes the success rate for licensure as an integral part of the overall success of many technical programs. The following…

Instrument and Survey Analysis Technical Report: Program Implementation Survey. Technical Report #1112

ERIC Educational Resources Information Center

Alonzo, Julie; Tindal, Gerald

2011-01-01

This technical document provides guidance to educators on the creation and interpretation of survey instruments, particularly as they relate to an analysis of program implementation. Illustrative examples are drawn from a survey of educators related to the use of the easyCBM learning system. This document includes specific sections on…

User Problems Associated with the Services of Federal and Quasi-Federal Technical Information Producing Agencies.

ERIC Educational Resources Information Center

Los Angeles Regional Technical Information Users Council, CA.

Nine reports of the Los Angeles Regional Technical Information Users Council, which identify and discuss user problem areas and recommend solutions, comprise this document. The topics of the reports are: (1) Air Force Technical Objective Document Release Program (AFTOD); (2) Army Qualitative Requirements Information Program (QDRI); (3)…

Programs of Study: Year 2 Joint Technical Report. Research Snapshot

ERIC Educational Resources Information Center

National Research Center for Career and Technical Education, 2010

2010-01-01

In January 2010, the National Research Center for Career and Technical Education (NRCCTE) issued a progress report on three studies being conducted by the Center that examine the implementation and outcomes of Programs of Study (POS), which were required in the 2006 reauthorization of the federal legislation for career and technical education…

National Evaluation of the IDEA Technical Assistance & Dissemination Program. NCEE 2014-4000

ERIC Educational Resources Information Center

Daley,Tamara C.; Fiore, Thomas A.; Bollmer, Julie; Nimkoff, Tamara; Lysy, Chris

2013-01-01

Under the Individuals with Disabilities Education Act (IDEA), the Technical Assistance and Dissemination (TA&D) Program is the U.S. Department of Education's (ED) primary vehicle for providing technical assistance (TA) to individuals and organizations responsible for serving children with disabilities and their families. The evaluation is part…

Technical and Vocational Education and Training in Peace Education: Solomon Islands

ERIC Educational Resources Information Center

Maebuta, Jack

2011-01-01

Technical and vocational education and training programs as a form of peace education are examined in this paper. It explores the notion of educating for a culture of peace through refocusing technical and vocational education and training programs on sustainable community development in the Solomon Islands. It further highlights the policy and…

77 FR 34354 - Notice Inviting Informal Public Comment on Training and Technical Assistance and Disability...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-11

... and Technical Assistance and Disability Inclusion Programming AGENCY: Corporation for National and... implementation of a unified training and technical assistance (TTA) strategy and disability inclusion programming... to CNCS as we plan and prepare for this work. We will accept comments in writing, as described below...

Technical Communication Internship Requirements in the Academic Economy: How We Compare among Ourselves and across Other Applied Fields

ERIC Educational Resources Information Center

Savage, Gerald J.; Seible, Marcea K.

2010-01-01

This article reports a study of internship requirements in technical communication programs compared with three established professions and one emerging profession that have certification or licensing requirements for practitioners. The study addresses three questions about technical communication internship programs: 1) Are internships offered as…

An Analysis of Gateway Technical College Instructors' Opinions on Secondary and Postsecondary Program Alignment

ERIC Educational Resources Information Center

Albrecht, Bryan D.

2011-01-01

The purpose of this study was to determine what opinions Gateway Technical College instructors had toward secondary and postsecondary program alignment. Student transition is critical to supporting the mission and vision of Gateway Technical College. The impetus for this study was twofold. First, the quality improvement process established at…

Connections for the Future through Vocational Technical 2 + 2 Programs. Annual Report, April 1989.

ERIC Educational Resources Information Center

Portland Area Vocational-Technical Education Consortium, OR.

The Portland Area Vocational Technical Education Consortium (PAVTEC) was created to enhance and strengthen the working partnerships between Portland Community College and local high schools in order to provide high quality, articulated vocational technical programs. PAVTEC's third annual report highlights activities which have added to the…

10 CFR 455.90 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Marketing § 455.90 Purpose. This subpart describes what constitutes a State program for technical assistance, program assistance, and marketing that may receive financial assistance under this part and sets forth the eligibility criteria for States to receive grants for technical assistance, program assistance, and marketing. ...

The Two-Year Colleges' Role in Building the Future Geoscience Technical Workforce

NASA Astrophysics Data System (ADS)

Wolfe, B.

2014-12-01

Careers in energy science related fields represent significant job growth in the U.S. Yet post-secondary career and technical programs have not kept pace with demand and energy science curriculum, including fundamental concepts of energy generation and environmental impact, lacks a firm position among general or career and technical education courses. Many of these emerging energy related jobs are skilled labor and entry level technical positions requiring less than a bachelor's degree. These include jobs such as solar/photovoltaic design and installation, solar water and space heating installation, energy management, efficiency and conservation auditor, environmental technician, etc. These energy related career pathways fit naturally within the geosciences discipline. Many of these jobs can be filled by individuals from HVAC, Industrial technology, welding, and electrical degree programs needing some additional specialized training and curriculum focused on fundamental concepts of energy, fossil fuel exploration and use, atmospheric pollution, energy generation, alternative energy sources, and energy conservation. Two-year colleges (2ycs) are uniquely positioned to train and fill these workforce needs as they already have existing career and technical programs and attract both recent high school graduates, as well as non-traditional students including displaced workers and returning veterans. We have established geoscience related workforce certificate programs that individuals completing the traditional industrial career and technical degrees can obtain to meet these emerging workforce needs. This presentation will discuss the role of geosciences programs at 2ycs in training these new workers, developing curriculum, and building a career/technical program that is on the forefront of this evolving industry.

Predictions of Performance in Career Education.

ERIC Educational Resources Information Center

Novick, M. R.; And Others

Prediction weights for educational programs in 22 vocational and technical fields are provided using ability scores from the American College Testing Program (ACT) Career Planning Profile and a Bayesian regression theory. The criterion variable studies was first-semester grade-point average. Each vocational-technical program analyzed was…

Assessment Program Technical Progress Report, 1996-1997.

ERIC Educational Resources Information Center

McCown, Laurie; Fanning, Erin; Eickmeyer, Barbara

Coconino Community College (CCC) annually assesses its institutional effectiveness to demonstrate its commitment to improving programs and services to students. The 1996-97 Assessment Program Technical Progress Report records the assessment and institutional activities enacted during the academic year, detailing the assessment model, timelines,…

Conduct of a Survey to Determine Why Blacks Do Not Have Sufficient Enrollment in Vocational-Technical Programs in Community Colleges, Area Vocational-Technical Centers and Secondary Schools, and Development of Strategies for Increasing the Number of Students Enrolling in Vocational-Technical Programs.

ERIC Educational Resources Information Center

West Virginia Research Coordinating Unit for Vocational Education, Huntington.

A project involving literature and demographic data reviews, survey development, survey administration, data analysis, and document preparation was conducted in West Virginia to determine why blacks do not have sufficient enrollments in vocational technical centers and secondary schools. Three separate multiple-choice questionnaires were developed…

Problem-Based Learning: Student Engagement, Learning and Contextualized Problem-Solving. Occasional Paper

ERIC Educational Resources Information Center

Mossuto, Mark

2009-01-01

The adoption of problem-based learning as a teaching method in the advertising and public relations programs offered by the Business TAFE (Technical and Further Education) School at RMIT University is explored in this paper. The effect of problem-based learning on student engagement, student learning and contextualised problem-solving was…

NCES Handbook of Survey Methods: Technical Report.

ERIC Educational Resources Information Center

Thurgood, Lori; Walter, Elizabeth; Carter, George; Henn, Susan; Huang, Gary; Nooter, Daniel; Smith, Wray; Cash, R. William; Salvucci, Sameena; Seastrom, Marilyn; Phan, Tai; Cohen, Michael

This handbook presents current explanations of how each survey program of the National Center for Education Statistics (NCES) obtains and prepared the data it publishes. The handbook aims to provide users of NCES data with the most current information necessary to evaluate the suitability of the statistics for their needs, with a focus on the…

Research in the Automation of Teaching. Technical Report.

ERIC Educational Resources Information Center

Zuckerman, Carl B.; And Others

An experiment was designed to compare the value of the Skinner Teaching Machine with more traditional teaching methods and to compare various means of presenting material via the teaching machine. Material from the United States Navy Basic Electricity course was programed into three series of items: one completion, one multiple choice, and one…

The Success of Advanced Learning Technologies for Instruction: Research and Evaluation of Human Factors Issues.

ERIC Educational Resources Information Center

Coldeway, Dan O.

2002-01-01

Data from three graduate programs using advanced learning technologies (ALTs) identified important human factors issues in technology use in three categories: learners (needs, skills, support, and motivation related to ALTs); faculty (attitudes, skills, support, and motivation related to ALTs); and technical staff (methods of providing assistance,…

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

2000-01-01

This is a quarterly listing of unclassified AGARD and RTO technical publications NASA received and announced in the NASA STI Database. Contents include 1) Sensor Data Fusion and Integration of the Human Element; 2) Planar Optical Measurement Methods for Gas Turbine Components; 3) RTO Highlights 1998, December 1998.

Robots, Jobs, and Education. State-of-the-Art Paper.

ERIC Educational Resources Information Center

Benton, Oliver; Branch, Charles W.

The purpose of this paper is to assist those in education, government, and industry who are responsible for managing vocational and technical training in their decisions about what programs should be initiated to accommodate the growing use of robots. Section 1 describes robot characteristics (type of drive, method of teaching, lifting capacity,…

Task Analysis for Curriculum Design and Validation. Allied Health Professions Project.

ERIC Educational Resources Information Center

Byers, Bruce B.; And Others

This report contains an outline of the method and the rationale for a project whose purpose is to develop training programs which are relevant to the specific requirements of technical occupations in nine allied health professions. The nine professions are in (a) nursing, (b) inhalation therapy, (c) radiology (technician level), (d) clinical…

Pittsburgh Technical Health Training Institute Demonstration Project; Quarterly Report.

ERIC Educational Resources Information Center

Kishkunas, Louis J.

This fifth quarterly report covers the period June 15, 1967 to December 15, 1967 of a project aimed at demonstrating a faster method of training higly qualified workers for the health field. During this period, nurse aides were trained in a pilot program based upon the educational objectives derived from entry level behavioral specifications…

USAF/SCEEE Graduate Student Summer Support Program (1982). Management and Technical Report.

DTIC Science & Technology

1982-10-01

AD-A130 767 USAF/SCEEE GRADUATE STUDENT SUMMER SUPPORT PROGRAM (1982) MANAGEMENT AND..(U) SOUTHEASTERN CENTER FORELECTRICAL ENGINEERING EDUCATION INC...SUMMER SUPPORT PROGRAM Conducted by Southeastern Center for Electrical Engineering Education under USAF Contract Number F49620-82-C-0035 MANAGEMENT ...UNITED STATES AIR FORCE GRADUATE STUDENT SL24MER SUPPORT PROGRAM 1982 PROGRAM MANAGEMENT AND TECHNICAL REPORT SOUTHEASTERN CENTER FOR ELECTRICAL

10 CFR 455.144 - Grant awards for State programs to provide technical assistance, program assistance, and marketing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Grant awards for State programs to provide technical assistance, program assistance, and marketing. 455.144 Section 455.144 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION GRANT PROGRAMS FOR SCHOOLS AND HOSPITALS AND BUILDINGS OWNED BY UNITS OF LOCAL GOVERNMENT AND PUBLIC CARE INSTITUTIONS Grant Awards §...

Evaluation of the Industrial Maintenance Program at Caldwell Community College and Technical Institute.

ERIC Educational Resources Information Center

Pipes, V. David

In 1982-83, a study was conducted at Caldwell Community College and Technical Institute to determine whether the objectives of the Industrial Maintenance Program were being met, to measure program success, and to identify aspects needing improvement. Surveys were sent to 30 students who graduated from the program before 1978, yielding a 57%…

Naval Shipyard Apprentice Program & Community-Technical College Linkages: A Model for Success.

ERIC Educational Resources Information Center

Cantor, Jeffrey A.

Each of the eight shipyards operated by the U.S. Navy administers a formal 4-year apprentice trades training program. The apprentice programs combine daily on-the-job training with classroom instruction in technical subjects related to work requirements, including shop math, chemistry, physics, and mechanical drafting. The programs are designed to…

Technical and Professional Communication Programs and the Small College Setting: Opportunities and Challenges

ERIC Educational Resources Information Center

Latterell, Catherine G.

2003-01-01

This article argues that the small school context has been a relatively unexamined or under-examined context for technical and professional communication program development. While graduate program development holds a large share of the field's attention in recent national forums, growth in graduate programs is a consequence of demand in the job…

Economic Evaluation of Computerized Structural Analysis

NASA Technical Reports Server (NTRS)

Fortin, P. E.

1985-01-01

This completed effort involved a technical and economic study of the capabilities of computer programs in the area of structural analysis. The applicability of the programs to NASA projects and to other users was studied. The applications in other industries was explored including both research and development and applied areas. The costs of several alternative analysis programs were compared. A literature search covered applicable technical literature including journals, trade publications and books. In addition to the literature search, several commercial companies that have developed computerized structural analysis programs were contacted and their technical brochures reviewed. These programs include SDRC I-DEAS, MSC/NASTRAN, SCADA, SUPERSAP, NISA/DISPLAY, STAAD-III, MICAS, GTSTRUDL, and STARS. These programs were briefly reviewed as applicable to NASA projects.

Internal dosimetry technical basis manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-20

The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophicalmore » discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.« less

The Development and Implementation of a School-to-Work Apprenticeship Model at a Technical Career Center.

ERIC Educational Resources Information Center

Kraft, James A.

A business and education partnership model addressed a shortage of local, qualified, entry-level, technically skilled workers through a school-to-work apprenticeship program at the North Montco Technical Career Center in Lansdale, Pennsylvania. The research-based solution plan of the Pennsylvania Youth Apprenticeship Program (PYAP) included three…

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are the minimum technical standards for program storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum technical standards for program storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What are the minimum technical standards for program storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES...

Quality Career/Technical Programs Prepare Students to Succeed in a New, More Challenging Economy

ERIC Educational Resources Information Center

Southern Regional Education Board (SREB), 2008

2008-01-01

Quality career/technical education and its role in school improvement was a primary theme of the 2008 "High Schools That Work" ("HSTW") Staff Development Conference. This newsletter covers crucial topics in quality CTE (career and technical education), including assessing the quality and effectiveness of CT programs, preparing students to succeed…

Towards ESP Programmes in Technical and Vocational Institutions in Malaysia.

ERIC Educational Resources Information Center

Shukor, Haji; And Others

This paper examines the nature of vocational, technical, and polytechnic education in Malaysia, the extent to which English for special purposes (ESP) programs are incorporated into such education, and the need for ESP program reform. In 1992, Malaysia possessed 70 vocational and 9 technical secondary schools, all of which offered some form of ESP…

75 FR 76468 - Office of the Assistant Secretary for Planning and Evaluation; Medicare Program; Meeting of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... Evaluation; Medicare Program; Meeting of the Technical Advisory Panel on Medicare Trustee Reports AGENCY... announces a public meeting of the Technical Advisory Panel on Medicare Trustee Reports (Panel). Notice of... long run. The Panel's discussion is expected to be very technical in nature and will focus on the...

77 FR 26553 - Medicare Program; Meeting of the Medicare Economic Index Technical Advisory Panel-May 21, 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

...] Medicare Program; Meeting of the Medicare Economic Index Technical Advisory Panel--May 21, 2012 AGENCY... announces that a public meeting of the Medicare Economic Index Technical Advisory Panel (``the Panel'') will... Economic Index (MEI). This first meeting will focus on MEI inputs and input weights. This meeting is open...

The Potential of Experiential Learning Models and Practices in Career and Technical Education and Career and Technical Teacher Education

ERIC Educational Resources Information Center

Clark, Robert W.; Threeton, Mark D.; Ewing, John C.

2010-01-01

Since inception, career and technical education programs have embraced experiential learning as a true learning methodology for students to obtain occupational skills valued by employers. Programs have integrated classroom instruction with laboratory experiences to provide students a significant opportunity to learn. However, it is questionable as…

Government Information Quarterly. Volume 7, no. 2: National Aeronautics and Space Administration Scientific and Technical Information Programs. Special issue

NASA Technical Reports Server (NTRS)

Hernon, Peter (Editor); Mcclure, Charles R. (Editor); Pinelli, Thomas E. (Editor)

1990-01-01

NASA scientific and technical information (STI) programs are discussed. Topics include management of information in a research and development agency, the new space and Earth science information systems at NASA's archive, scientific and technical information management, and technology transfer of NASA aerospace technology to other industries.

WORKING WITH STUDENTS INSIDE AND OUTSIDE THE CLASSROOM IN ADULT BASIC EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

BRAZZIEL, WILLIAM F.

TECHNICAL EDUCATION OF THE ADULT HARD-CORE UNEMPLOYED OFTEN FAILS BECAUSE OF PERSONAL PROBLEMS AND BASIC EDUCATION AND CULTURAL LACKS. A BROAD CONCEPT OF EDUCATION IS ESSENTIAL TO PROGRAMS FOR DEVELOPMENT OF TECHNICAL SKILLS. A COLLEGE PROJECT DESIGNED TO MEET THESE REQUIREMENTS IS PRESENTED. A COMBINATION OF BASIC AND TECHNICAL EDUCATION WITH THE…

Extensible Markup Language: How Might It Alter the Software Documentation Process and the Role of the Technical Communicator?

ERIC Educational Resources Information Center

Battalio, John T.

2002-01-01

Describes the influence that Extensible Markup Language (XML) will have on the software documentation process and subsequently on the curricula of advanced undergraduate and master's programs in technical communication. Recommends how curricula of advanced undergraduate and master's programs in technical communication ought to change in order to…

A Five-Year Follow-Up of Students Enrolled in Post-Secondary Vocational-Technical-Transfer Programs.

ERIC Educational Resources Information Center

Noeth, Richard J.; Hanson, Gary R.

The nationwide study examines career behavior patterns and work orientations of students five years after they began vocational-technical transfer programs at community colleges, technical schools, and similar kinds of institutions in the fall of 1970. The study sample consisted of 4,350 individuals selected from the national norm group who…

Where the lay and the technical meet: Using an anthropology of interfaces to explain persistent reproductive health disparities in West Africa.

PubMed

Jaffré, Yannick; Suh, Siri

2016-05-01

Despite impressive global investment in reproductive health programs in West Africa, maternal mortality remains unacceptably high and obstetric care is often inadequate. Fertility is among the highest in the world, while contraceptive prevalence remains among the lowest. This paper explores the social and technical dimensions of this situation. We argue that effective reproductive health programs require analyzing the interfaces between technical programs and the social logics and behaviors of health professionals and client populations. Significant gaps between health programs' goals and the behaviors of patients and health care professionals have been observed. While public health projects aim to manage reproduction, sexuality, fertility, and professional practices are regulated socially. Such projects may target technical practices, but access to care is greatly influenced by social norms and ethics. This paper shows how an empirical anthropology that investigates the social and technical interfaces of reproduction can contribute to improved global health. Copyright © 2016 Elsevier Ltd. All rights reserved.

76 FR 27648 - World Trade Center (WTC) Health Program Scientific/Technical Advisory Committee; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-12

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade... Prevention (CDC), announces the establishment of the World Trade Center (WTC) Health Program Scientific..., Designated Federal Officer, World Trade Center Health Program Scientific/Technical Advisory Committee...

FY 2016 Grant Announcement: FY 2016 Technical Analysis and Programmatic Evaluation Support to the Chesapeake Bay Program Partnership

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency’s Chesapeake Bay Program Office is announcing a Request for Proposals for applicants to provide the Chesapeake Bay Program partners with a proposal(s) for providing technical analysis and programmatic evaluation

Lincoln Advanced Science and Engineering Reinforcement (LASER) program

NASA Technical Reports Server (NTRS)

Williams, Willie E.

1989-01-01

Lincoln University, under the Lincoln Advanced Science and Engineering Reinforcement (LASER) Program, has identified and successfully recruited over 100 students for majors in technical fields. To date, over 70 percent of these students have completed or will complete technical degrees in engineering, physics, chemistry, and computer science. Of those completing the undergraduate degree, over 40 percent have gone on to graduate and professional schools. This success is attributable to well planned approaches to student recruitment, training, personal motivation, retention, and program staff. Very closely coupled to the above factors is a focus designed to achieve excellence in program services and student performance. Future contributions by the LASER Program to the pool of technical minority graduates will have a significant impact. This is already evident from the success of the students that began the first year of the program. With program plans to refine many of the already successful techniques, follow-on activities are expected to make even greater contributions to the availability of technically trained minorities. For example, undergraduate research exposure, broadened summer, and co-op work experiences will be enhanced.

A Numerical Method for Computing the Transonic Fan Duct Flow over a Centerbody into an Exterior Free Stream - Program Tea-343,

DTIC Science & Technology

1974-09-24

Transonic Flows with Imbedded Shock Waves", Boeing Scientific Research Laboratories Document D1-82-1053 (1971); also as invited lecture series for AGARD...Past Thin Lifting Airfoils", Boeing Scientific Research Laboratories Document D180-2298-1, June 1971. 5. Krupp, J. A. and Ia-man, 9. M., "Computation...Aerodynamics and Marine Sciences Laboratory, Boeing Scientific Research Laboratories, June 1971. 7. Krupp, J. A., "Documentation for Program TSONIC", Technical

Findings from a national needs assessment of American Indian/Alaska native child welfare programs.

PubMed

Leake, Robin; Potter, Cathryn; Lucero, Nancy; Gardner, Jerry; Deserly, Kathy

2012-01-01

The National Child Welfare Resource Center for Tribes, a member of the Children's Bureau Child Welfare Training and Technical Assistance Network, conducted a national needs assessment of tribal child welfare. This assessment explored current practices in tribal child welfare to identify unique systemic strengths and challenges. A culturally based, multi-method design yielded findings in five areas: tribal child welfare practice, foster care and adoption, the Indian Child Welfare Act, legal and judicial, and program operations.

1981 Bibliography of Technical Writing.

ERIC Educational Resources Information Center

Book, Virginia Alm; And Others

1982-01-01

Offers resources on technical writing published in 1981. Arranges the citations under the following categories: bibliographies, books, reviews, and articles on the profession; theory and philosophy; pedagogy; technical speech; research; designing degree programs; technical writing and the computer; writing technical articles and reports;…

45 CFR 1370.3 - Information and technical assistance center grants.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES FAMILY VIOLENCE PREVENTION AND SERVICES PROGRAMS FAMILY VIOLENCE PREVENTION AND SERVICES PROGRAMS § 1370.3 Information and technical assistance center...

Defense Research: Improved Management of DOD’s Technical Corrosion Collaboration Program Needed

DTIC Science & Technology

2014-05-01

Education and Research on Corrosion and Material Performance TCC Technical Corrosion Collaboration UCC University Corrosion Collaboration This is...is the successor to the University Corrosion Collaboration ( UCC ) pilot program, established in 2008. The TCC program builds on efforts of the UCC ...going from a pilot to a full program. They indicated that the UCC pilot program naturally evolved into the TCC pilot program in 2011, and the pilot

[Research progresses on ergonomics assessment and measurement methods for push-pull behavior].

PubMed

Zhao, Yan; Li, Dongxu; Guo, Shengpeng

2011-10-01

Pushing and pulling (P&P) is a common operating mode of operator's physical works, and plays an important role in evaluation of human behavior health and operation performance. At present, there are many research methods of P&P, and this article is a state-of-art review of the classification of P&P research methods, the various impact factors in P&P program, technical details of internal/external P&P force measurement and evaluation, the limitation of current research methods and the future developments in the ergonomics field.

TECHNICAL APPROACHES TO CHARACTERIZING AND ...

EPA Pesticide Factsheets

The document provides brownfields planners with an overview of the technical methods that can be used to achieve successful site assessment and cleanup which are two key components of the brownfields redevelopment process. No two brownfields sites are identical and planners will need to base assessment and cleanup activities on the conditions of the particular sites with which they are dealing. A site assessment strategy should address: the type and extent of contamination, if any, that is present, the types of data needed to adequately assess the site; appropriate sampling and analytical methods to characterize the contamination; acceptable level of uncertainty and cleanup technologies that contain or treat the types of wastes present.This document includes references to state agency roles including the Voluntary Cleanup Program, public involvement and other guidances that may be used. Information

Urban Rail Supporting Technology Program Fiscal Year 1974 Year End Summary

DOT National Transportation Integrated Search

1975-03-01

Major areas include program management, technical support and application engineering, facilities development, test and evaluation, and technology development. Specific technical discussion includes track measurement systems; UMTA facilities developm...

The Rebirth of a Career and Technical Education Program.

ERIC Educational Resources Information Center

Reese, Susan

2003-01-01

Describes how a Milwaukee high school sustained its career and technical education programs by cultivating business-industry partnerships and developing a successful heating, ventilation, air conditioning, and refrigeration curriculum. (JOW)

40 CFR 52.1690 - Small business technical and environmental compliance assistance program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) New York § 52.1690 Small business technical and environmental compliance assistance program. On January 11, 1993, the New York State Department of Environmental Conservation submitted a plan for the... Assistance Program for incorporation in the New York state implementation plan. This plan meets the...

40 CFR 52.2732 - Small business technical and environmental compliance assistance program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) Puerto Rico § 52.2732 Small business technical and environmental compliance assistance program. On November 16, 1992, the Puerto Rico Environmental Quality Board submitted a plan for the... Assistance Program for incorporation in the Puerto Rico state implementation plan. This plan meets the...

40 CFR 52.2732 - Small business technical and environmental compliance assistance program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) Puerto Rico § 52.2732 Small business technical and environmental compliance assistance program. On November 16, 1992, the Puerto Rico Environmental Quality Board submitted a plan for the... Assistance Program for incorporation in the Puerto Rico state implementation plan. This plan meets the...

40 CFR 52.2732 - Small business technical and environmental compliance assistance program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) Puerto Rico § 52.2732 Small business technical and environmental compliance assistance program. On November 16, 1992, the Puerto Rico Environmental Quality Board submitted a plan for the... Assistance Program for incorporation in the Puerto Rico state implementation plan. This plan meets the...

77 FR 37060 - Critical Infrastructure and Key Resources (CIKR) Asset Protection Technical Assistance Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-20

...), National Protection and Programs Directorate (NPPD), Office of Infrastructure Protection (IP.../IP/IICD, 245 Murray Lane SW., Mailstop 0602, Arlington, VA 20598-0602. Email requests should go to... Technical Assistance Program (CAPTAP) is offered jointly by the NPPD/IP and the Federal Emergency Management...

Human Genome: DOE Origins

Science.gov Websites

Health and Environmental Research [OHER], the program that supported most Biology in the Department. The origins of DOE's biology program traced to the Manhattan Project, the World War II program that produced Technical Report; 1964 Impact of Radiation Biology on Fundamental Insights in Biology; DOE Technical Report

77 FR 37390 - Notice Inviting Informal Public Comment on Training and Technical Assistance and Disability...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

... and Technical Assistance and Disability Inclusion Programming AGENCY: Corporation for National and... Disability Inclusion Programming; correction. SUMMARY: The Corporation for National and Community Service... Disability Inclusion Programming that appeared in the Federal Register of June 11, 2012 (75 FR 34354). That...

75 FR 30756 - Medicare Program; Supplemental Proposed Changes to the Hospital Inpatient Prospective Payment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

.... 93.773, Medicare--Hospital Insurance; and Program No. 93.774, Medicare-- Supplementary Medical... technical errors that appeared in the supplementary proposed rule entitled ``Medicare Program; Supplemental... Doc. 2010-12567 filed May 21, 2010, there are technical and typographical errors that are identified...

78 FR 38983 - World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP-STAC)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP-STAC) Correction: This notice was... and Control, (BSC, NCIPC) and the name of the Committee should read World Trade Center Health Program...

CAI Programs and Macros for Formative Curriculum Evaluation.

ERIC Educational Resources Information Center

Dasenbrock, David; Teates, Thomas

This technical memo is designed for persons who are interested in research with and development of curriculum material. Detailed information regarding computer programs, and program documentation used in the development and evaluation of ISCS curriculum materials is provided. The memo includes supplemental information to ISCS Technical Report I…

Science and Engineering Technical Assessments (SETA) Program

NASA Technical Reports Server (NTRS)

Huy, Frank

2000-01-01

This document provides a project plan for the D.N. American response to Modification #1 to Contract Task Order #13 - Program Maintenance and Logistics for the Science and Engineering Technical Assessments (SETA) contract.

The New Jersey Police Technical Assistance Program

DOT National Transportation Integrated Search

2007-03-01

The Police Technical Assistance Program (PTAP), a federal model, was adopted to support the New Jersey Department of Transportation (NJDOT)s safety mission. Several activities were included in this initiative: conducting assessments, providing tec...

Handbook for Program Developers of Associate of Applied Science and Business Degrees at Lima Technical College.

ERIC Educational Resources Information Center

Casto, Robert A.

Intended as a resource for program developers, this handbook illustrates the process of developing program proposals for the associate of applied science and business (AASB) degrees at Lima Technical College (LTC), in Ohio. Following an introduction, section 1 discusses the potential reasons for the addition of a program to the LTC curriculum.…

Laser Technician Associate Degree Program. A Proposal Submitted to Wisconsin State Board of Vocational, Technical, and Adult Education. (Curriculum Development.) Final Report.

ERIC Educational Resources Information Center

North Central Technical Inst., Wausau, WI.

This final report contains the program proposal with supporting data for developing curriculum materials for and implementing an associate-degree laser technology program at the North Central Technical Institute. The proposal outline provides this information: (1) objectives for the program designed to prepare a technician to safely operate,…

Toward the Development of a Program Quality Framework for Career and Technical Education Programs: A Researcher-Practitioner Collaborative Project

ERIC Educational Resources Information Center

Brodersen, R. Marc; Yanoski, David; Hyslop, Alisha; Imperatore, Catherine

2016-01-01

Career and technical education (CTE) programs of study are subject to rigorous state and federal accountability systems that provide information on key student outcomes. However, while these outcome measures can form a basis for identifying high- and low-performing programs, they are insufficient for answering underlying questions about how or why…

Evaluation of the Cosmetology Program at Caldwell Community College and Technical Institute--Fall, 1981.

ERIC Educational Resources Information Center

Pipes, V. David

In fall 1981, the cosmetology program at Caldwell Community College and Technical Institute (CCC&TI) was evaluated as part of a process to create a model for the periodic evaluation of all occupational programs at the school. In addition to collecting information for planning and program improvement, the study sought to assess the achievement of…

Evaluation of the Nursing Program at Caldwell Community College and Technical Institute--Summer, 1983.

ERIC Educational Resources Information Center

Pipes, V. David

In summer 1983, an evaluation of the nursing program at Caldwell Community College and Technical Institute was conducted to determine whether program objectives were being met, to measure program success, and to identify areas needing improvement. Surveys were sent to 19 early (pre-1978) and 47 recent Licensed Practical Nurse (LPN) graduates; 17…

The NASA/JPL 64-meter-diameter antenna at Goldstone, California: Project report, technical staff, tracking and data acquisition organization

NASA Technical Reports Server (NTRS)

1974-01-01

The significant management and technical aspects of the JPL Project to develop and implement a 64-meter-diameter antenna at the Goldstone Deep Space Communications Complex in California, which was the first of the Advanced Antenna Systems of the National Aeronautics and Space Administration/Jet Propulsion Laboratory Deep Space Network are described. The original need foreseen for a large-diameter antenna to accomplish communication and tracking support of NASA's solar system exploration program is reviewed, and the translation of those needs into the technical specification of an appropriate ground station antenna is described. The antenna project is delineated by phases to show the key technical and managerial skills and the technical facility resources involved. There is a brief engineering description of the antenna and its closely related facilities. Some difficult and interesting engineering problems, then at the state-of-the-art level, which were met in the accomplishment of the Project, are described. The key performance characteristics of the antenna, in relation to the original specifications and the methods of their determination, are stated.

Technical Packages in Injury and Violence Prevention to Move Evidence Into Practice: Systematic Reviews and Beyond.

PubMed

Haegerich, Tamara M; David-Ferdon, Corinne; Noonan, Rita K; Manns, Brian J; Billie, Holly C

2016-09-07

Injury and violence prevention strategies have greater potential for impact when they are based on scientific evidence. Systematic reviews of the scientific evidence can contribute key information about which policies and programs might have the greatest impact when implemented. However, systematic reviews have limitations, such as lack of implementation guidance and contextual information, that can limit the application of knowledge. "Technical packages," developed by knowledge brokers such as the federal government, nonprofit agencies, and academic institutions, have the potential to be an efficient mechanism for making information from systematic reviews actionable. Technical packages provide information about specific evidence-based prevention strategies, along with the estimated costs and impacts, and include accompanying implementation and evaluation guidance to facilitate adoption, implementation, and performance measurement. We describe how systematic reviews can inform the development of technical packages for practitioners, provide examples of technical packages in injury and violence prevention, and explain how enhancing review methods and reporting could facilitate the use and applicability of scientific evidence. © The Author(s) 2016.

Proceedings of the Annual Meeting of the Council for Programs in Technical and Scientific Communication (14th, Orlando, Florida, October 7-9, 1987).

ERIC Educational Resources Information Center

Geonetta, Sam C., Ed.

Based on the notion of "reaching out," this proceedings presents papers from the annual meeting of the Council for Programs in Technical and Scientific Communication. Papers in the proceedings are: "Southern Tech's Technical Writing Certificate" (William S. Pfeiffer); "Reach Out and Quack Someone" (Daniel R. Jones);…

Identifying Effective Strategies to Providing Technical Support to One-to-One Programs

ERIC Educational Resources Information Center

Thomas, Mark W.

2013-01-01

The problem of this study was that while one-to-one initiatives in the K-12 environment are growing, the technical support personnel that work in these environments are experiencing problems supporting these initiatives. The purposes of this study were to: (a) identify common problems of providing technical support in a one-to-one laptop program,…

Technical-Oriented Enterprise Resource Planning (ERP) Body of Knowledge for Information Systems Programs: Content and Implementation

ERIC Educational Resources Information Center

Boyle, Todd A.

2007-01-01

In this article, the author proposes a body of knowledge that the educators can use to incorporate the technical aspects of enterprise resource planning (ERP) into an information systems (IS) program, encapsulated as the ERP technical knowledge framework. To illustrate the application of this framework, the author discusses a course sequence that…

Employers' Perception of Graduates with Entry-Level Technical Skills from Construction Industry Programs in Ghana and Nigeria

ERIC Educational Resources Information Center

Acheampong, Philip

2013-01-01

The purpose of this comparative study was to identify the technical skills and abilities needed by prospective employees of construction industries in Ghana and Nigeria. Potential employees were defined here as recent graduates of construction industry programs with entry-level technical skills. The continuous growth in and expansion of these two…

The Development of a Project-Based Collaborative Technical Writing Model Founded on Learner Feedback in a Tertiary Aeronautical Engineering Program

ERIC Educational Resources Information Center

Tatzl, Dietmar; Hassler, Wolfgang; Messnarz, Bernd; Fluhr, Holger

2012-01-01

The present article describes and evaluates collaborative interdisciplinary group projects initiated by content lecturers and an English-as-a-Foreign-Language (EFL) instructor for the purpose of teaching technical writing skills in an aeronautical engineering degree program. The proposed technical writing model is assessed against the results of a…

The Council for Programs in Technical and Scientific Communication Proceedings (6th, Stillwater, Oklahoma, April 26-27, 1979).

ERIC Educational Resources Information Center

Warren, Thomas, Ed.

Articles in these proceedings of a conference of the Council for Programs in Technical and Scientific Communication represent the views of professional communicators and academicians who share a concern for providing breadth and quality of preparation of present and future technical communicators. The 11 articles discuss the following topics: (1)…

A Qualitative Inquiry of Career Exploration in Highly Implemented Career and Technical Education Programs of Study

ERIC Educational Resources Information Center

Stipanovic, Natalie; Stringfield, Sam

2013-01-01

This qualitative study explores career counseling and guidance services as provided to students engaged in career and technical education programs at three sites in the United States. The sites, consisting of high schools and community colleges, were part of the National Research Center for Career and Technical Education's 5-year studies of…

Proceedings of the Office of Special Education Programs' Annual Technical Assistance and Dissemination Meeting (6th, Washington, DC, January 16-18, 1996).

ERIC Educational Resources Information Center

Special Education Programs (ED/OSERS), Washington, DC.

This document presents the proceedings for the Office of Special Education Programs' 6th Annual Technical Assistance and Dissemination Meeting held on January 16-18, 1996, in Washington, DC. Conference discussions centered around changing expectations for local and state education agencies and technical assistance and dissemination (TA&D)…

Integrated Technical Curriculum. Curriculum Developed for Project Second Chance II: Tech Reading, Tech Science, Tech Math, Automotive.

ERIC Educational Resources Information Center

Sorensen, Mary K.; And Others

This integrated technical curriculum is designed to enroll and retain adult high school noncompleters in occupational programs by providing them with the remedial and content-area reading instruction needed for success in an automotive program. The following topics are covered in the four units: (1) skills for reading technical materials (basics…

Soft Skills in Health Careers Programs: A Case Study of A Regional Vocational Technical High School

ERIC Educational Resources Information Center

Park, Chong Myung

2017-01-01

The purpose of this study is to develop an understanding of the ways in which educational experiences might differ between a regional vocational technical high school (RVTH) and short-term career-training programs. A particular regional vocational technical high school was selected for its outstanding academic records and placement rates, and a…

The NASA "PERS" Program: Solid Polymer Electrolyte Development for Advanced Lithium-Based Batteries

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.; Bennett, William R.

2007-01-01

In fiscal year 2000, The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) established a collaborative effort to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The ultimate objective of this development program, which was referred to as the Polymer Energy Rechargeable System (PERS), was to establish a world-class technology capability and U.S. leadership in polymer-based battery technology for aerospace applications. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. Out of a total of 38 proposals received in response to a NASA Research Announcement (NRA) solicitation, 18 proposals (13 contracts and 5 grants) were selected for initial award to address these technical challenges. Brief summaries of technical approaches, results and accomplishments of the PERS Program development efforts are presented. With Agency support provided through FY 2004, the PERS Program efforts were concluded in 2005, as internal reorganizations and funding cuts resulted in shifting programmatic priorities within NASA. Technically, the PERS Program participants explored, to various degrees over the lifetime of the formal program, a variety of conceptual approaches for developing and demonstrating performance of a viable advanced solid polymer electrolyte possessing the desired attributes, as well as several participants addressing all components of an integrated cell configuration. Programmatically, the NASA PERS Program was very successful, even though the very challenging technical goals for achieving a viable solid polymer electrolyte material or the overall envisioned long-term, program objectives were not met due to funding reductions. The NASA PERS Program provided research opportunities and generated and disseminated a wealth of new scientific knowledge and technical competencies within the polymer electrolyte area.

Sharing NASA Science with Decision Makers: A Perspective from NASA's Applied Remote Sensing Training (ARSET) Program

NASA Astrophysics Data System (ADS)

Prados, A. I.; Blevins, B.; Hook, E.

2015-12-01

NASA ARSET http://arset.gsfc.nasa.gov has been providing applied remote sensing training since 2008. The goals of the program are to develop the technical and analytical skills necessary to utilize NASA resources for decision-support. The program has reached over 3500 participants, with 1600 stakeholders from 100 countries in 2015 alone. The target audience for the program are professionals engaged in environmental management in the public and private sectors, such as air quality forecasters, public utilities, water managers and non-governmental organizations engaged in conservation. Many program participants have little or no expertise in NASA remote sensing, and it's frequently their very first exposure to NASA's vast resources. One the key challenges for the program has been the evolution and refinement of its approach to communicating NASA data access, research, and ultimately its value to stakeholders. We discuss ARSET's best practices for sharing NASA science, which include 1) training ARSET staff and other NASA scientists on methods for science communication, 2) communicating the proper amount of scientific information at a level that is commensurate with the technical skills of program participants, 3) communicating the benefit of NASA resources to stakeholders, and 4) getting to know the audience and tailoring the message so that science information is conveyed within the context of agencies' unique environmental challenges.

Technical Writing Teachers and the Challenges of Desktop Publishing.

ERIC Educational Resources Information Center

Kalmbach, James

1988-01-01

Argues that technical writing teachers must understand desktop publishing. Discusses the strengths that technical writing teachers bring to desktop publishing, and the impact desktop publishing will have on technical writing courses and programs. (ARH)

Means of storage and automated monitoring of versions of text technical documentation

NASA Astrophysics Data System (ADS)

Leonovets, S. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The paper presents automation of the process of preparation, storage and monitoring of version control of a text designer, and program documentation by means of the specialized software is considered. Automation of preparation of documentation is based on processing of the engineering data which are contained in the specifications and technical documentation or in the specification. Data handling assumes existence of strictly structured electronic documents prepared in widespread formats according to templates on the basis of industry standards and generation by an automated method of the program or designer text document. Further life cycle of the document and engineering data entering it are controlled. At each stage of life cycle, archive data storage is carried out. Studies of high-speed performance of use of different widespread document formats in case of automated monitoring and storage are given. The new developed software and the work benches available to the developer of the instrumental equipment are described.

Sustainable hydropower in Lower Mekong Countries: Technical assessment and training travel report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadjerioua, Boualem; Witt, Adam M.

The U.S. Agency for International Development (USAID), through their partnership with the U.S. Department of the Interior (DOI), requested the support of Oak Ridge National Laboratory (ORNL) to provide specialized technical assistance as part of the Smart Infrastructure for the Mekong (SIM) Program in Thailand. Introduced in July 2013 by U.S. Secretary of State John Kerry, SIM is a U.S. Government Inter-Agency program that provides Lower Mekong partner countries with targeted, demand-driven technical and scientific assistance to support environmentally sound, climate conscious and socially equitable infrastructure, clean energy development, and water resources optimization. The U.S. Government is committed to supportingmore » sustainable economic development within the region by providing tools, best practices, technical assistance, and lessons learned for the benefit of partner countries. In response to a request from the Electricity Generating Authority of Thailand (EGAT), a SIM project was developed with two main activities: 1) to promote hydropower sustainability and efficiency through technical assessment training at two existing hydropower assets in Thailand, and 2) the design and implementation of one national and two or three regional science and policy workshops, to be co-hosted with EGAT, to build common understanding of and commitment to environmental and social safeguards for Mekong Basin hydropower projects. The U.S. Department of Energy (DOE) is leading the technical assessment (Activity 1), and has contracted ORNL to provide expert technical assistance focused on increasing efficiency at existing projects, with the goal of increasing renewable energy generation at little to no capital cost. ORNL is the leading national laboratory in hydropower analysis, with a nationally recognized and highly qualified team of scientists addressing small to large-scale systems (basin-, regional-, and national-scale) energy generation optimization analysis for DOE. The mission of the ORNL Water Power Program is to develop technologies, decision-support tools, and methods of analysis that enable holistic management of water-dependent energy infrastructure and natural resources in support of the DOE Energy Efficiency and Renewable Energy Office (DOE-EERE), Federal hydropower agencies, Federal Energy Regulatory Commission (FERC), Nuclear Regulatory Commission (NRC), energy producers, and other entities. In support of SIM, ORNL completed technical assessments of two hydropower plants owned and operated by the Electricity Generating Authority of Thailand (EGAT): Vajiralongkorn (VRK), with an installed capacity of 300 MW, and Rajjaprabha (RPB), with an installed capacity of 240MW. Technical assessment is defined as the assessment of hydropower operation and performance, and the identification of potential opportunities for performance improvement through plant optimization. At each plant, the assessment included an initial analysis of hydropower operating and performance metrics, provided by dam owners. After this analysis, ORNL engaged with the plant management team in a skills exchange, where best practices, operational methods, and technical challenges were discussed. The technical assessment process was outlined to plant management followed by a presentation of preliminary results and analysis based on 50 days of operational data. EGAT has agreed to provide a full year of operational data so a complete and detailed assessment that captures seasonal variability can be completed. The results of these assessments and discussions will be used to develop a set of best practices, training, and procedure recommendations to improve the efficiency of the two assessed plants« less

7 CFR 652.5 - Participant acquisition of technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technical service providers. (d) The Department may approve written agreements for technical assistance... identify in the particular program contract or written agreement the payment provisions for technical... 7 Agriculture 6 2010-01-01 2010-01-01 false Participant acquisition of technical services. 652.5...

Range Flight Safety Requirements

NASA Technical Reports Server (NTRS)

Loftin, Charles E.; Hudson, Sandra M.

2018-01-01

The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

The Challenges of Career and Technical Education Concurrent Enrollment: An Administrative Perspective

ERIC Educational Resources Information Center

Haag, Patricia W.

2015-01-01

Career and technical education concurrent enrollment may pose unique challenges in programming and enrollment for program administrators, and this chapter describes the experiences and challenges of a CTE concurrent enrollment administrator.

Technical assistance from state health departments for communities engaged in policy, systems, and environmental change: the ACHIEVE Program.

PubMed

Hefelfinger, Jenny; Patty, Alice; Ussery, Ann; Young, Walter

2013-10-24

This study assessed the value of technical assistance provided by state health department expert advisors and by the staff of the National Association of Chronic Disease Directors (NACDD) to community groups that participated in the Action Communities for Health, Innovation, and Environmental Change (ACHIEVE) Program, a CDC-funded health promotion program. We analyzed quantitative and qualitative data reported by community project coordinators to assess the nature and value of technical assistance provided by expert advisors and NACDD staff and the usefulness of ACHIEVE resources in the development and implementation of community action plans. A grounded theory approach was used to analyze and categorize phrases in text data provided by community coordinators. Open coding placed conceptual labels on text phrases. Frequency distributions of the quantitative data are described and discussed. The most valuable technical assistance and program support resources were those determined to be in the interpersonal domain (ie, interactions with state expert advisors, NACDD staff, and peer-to-peer support). The most valuable technical assistance events were action institutes, coaches' meetings, webinars, and technical assistance conference calls. This analysis suggests that ACHIEVE communities valued the management and training assistance provided by expert advisors and NACDD staff. State health department expert advisors provided technical guidance and support, including such skills or knowledge-based services as best-practice strategies, review and discussion of community assessment data, sustainability planning, and identification of possible funding opportunities. NACDD staff led development and implementation of technical assistance events.

An intervention to help community-based organizations implement an evidence-based HIV prevention intervention: the Mpowerment Project technology exchange system.

PubMed

Kegeles, Susan M; Rebchook, Gregory; Pollack, Lance; Huebner, David; Tebbetts, Scott; Hamiga, John; Sweeney, David; Zovod, Benjamin

2012-03-01

Considerable resources have been spent developing and rigorously testing HIV prevention intervention models, but such models do not impact the AIDS pandemic unless they are implemented effectively by community-based organizations (CBOs) and health departments. The Mpowerment Project (MP) is being implemented by CBOs around the U.S. It is a multilevel, evidence-based HIV prevention program for young gay/bisexual men that targets individual, interpersonal, social, and structural issues by using empowerment and community mobilization methods. This paper discusses the development of an intervention to help CBOs implement the MP called the Mpowerment Project Technology Exchange System (MPTES); CBOs' uptake, utilization and perceptions of the MPTES components; and issues that arose during technical assistance. The seven-component MPTES was provided to 49 CBOs implementing the MP that were followed longitudinally for up to two years. Except for the widely used program manual, other program materials were used early in implementing the MP and then their use declined. In contrast, once technical assistance was proactively provided, its usage remained constant over time, as did requests for technical assistance. CBOs expressed substantial positive feedback about the MPTES, but felt that it needs more focus on diversity issues, describing real world implementation approaches, and providing guidance on how to adapt the MP to diverse populations.

Training and technical assistance to enhance capacity building between prevention research centers and their partners.

PubMed

Spadaro, Antonia J; Grunbaum, Jo Anne; Dawkins, Nicola U; Wright, Demia S; Rubel, Stephanie K; Green, Diane C; Simoes, Eduardo J

2011-05-01

The Centers for Disease Control and Prevention has administered the Prevention Research Centers Program since 1986. We quantified the number and reach of training programs across all centers, determined whether the centers' outcomes varied by characteristics of the academic institution, and explored potential benefits of training and technical assistance for academic researchers and community partners. We characterized how these activities enhanced capacity building within Prevention Research Centers and the community. The program office collected quantitative information on training across all 33 centers via its Internet-based system from April through December 2007. Qualitative data were collected from April through May 2007. We selected 9 centers each for 2 separate, semistructured, telephone interviews, 1 on training and 1 on technical assistance. Across 24 centers, 4,777 people were trained in 99 training programs in fiscal year 2007 (October 1, 2006-September 30, 2007). Nearly 30% of people trained were community members or agency representatives. Training and technical assistance activities provided opportunities to enhance community partners' capacity in areas such as conducting needs assessments and writing grants and to improve the centers' capacity for cultural competency. Both qualitative and quantitative data demonstrated that training and technical assistance activities can foster capacity building and provide a reciprocal venue to support researchers' and the community's research interests. Future evaluation could assess community and public health partners' perception of centers' training programs and technical assistance.

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 4: Maintenance document (version 1.1)

NASA Technical Reports Server (NTRS)

Baruah, P. K.; Bussoletti, J. E.; Chiang, D. T.; Massena, W. A.; Nelson, F. D.; Furdon, D. J.; Tsurusaki, K.

1981-01-01

The Maintenance Document is a guide to the PAN AIR software system, a system which computes the subsonic or supersonic linear potential flow about a body of nearly arbitrary shape, using a higher order panel method. The document describes the over-all system and each program module of the system. Sufficient detail is given for program maintenance, updating and modification. It is assumed that the reader is familiar with programming and CDC (Control Data Corporation) computer systems. The PAN AIR system was written in FORTRAN 4 language except for a few COMPASS language subroutines which exist in the PAN AIR library. Structured programming techniques were used to provide code documentation and maintainability. The operating systems accommodated are NOS 1.2, NOS/BE and SCOPE 2.1.3 on the CDC 6600, 7600 and Cyber 175 computing systems. The system is comprised of a data management system, a program library, an execution control module and nine separate FORTRAN technical modules. Each module calculates part of the posed PAN AIR problem. The data base manager is used to communicate between modules and within modules. The technical modules must be run in a prescribed fashion for each PAN AIR problem. In order to ease the problem of supplying the many JCL cards required to execute the modules, a separate module called MEC (Module Execution Control) was created to automatically supply most of the JCL cards. In addition to the MEC generated JCL, there is an additional set of user supplied JCL cards to initiate the JCL sequence stored on the system.

CERT tribal internship program. Final intern report: Maria Perez, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-09-01

Historically, American Indian Tribes have lacked sufficient numbers of trained, technical personnel from their communities to serve their communities; tribal expertise in the fields of science, business and engineering being extremely rare and programs to encourage these disciplines almost non-existent. Subsequently, Tribes have made crucial decisions about their land and other facets of Tribal existence based upon outside technical expertise, such as that provided by the United States government and/or private industries. These outside expert opinions rarely took into account the traditional and cultural values of the Tribes being advised. The purpose of this internship was twofold: Create and maintainmore » a working relationship between CERT and Colorado State University (CSU) to plan for the Summit on Tribal human resource development; and Evaluate and engage in current efforts to strengthen the Tribal Resource Institute in Business, Engineering and Science (TRIBES) program. The intern lists the following as the project results: Positive interactions and productive meetings between CERT and CSU; Gathered information from Tribes; CERT database structure modification; Experience as facilitator in participating methods; Preliminary job descriptions for staff of future TRIBES programs; and Additions for the intern`s personal database of professional contacts and resources.« less

USRA/RIACS

NASA Technical Reports Server (NTRS)

Oliger, Joseph

1992-01-01

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on 6 June 1983. RIACS is privately operated by USRA, a consortium of universities with research programs in the aerospace sciences, under a cooperative agreement with NASA. The primary mission of RIACS is to provide research and expertise in computer science and scientific computing to support the scientific missions of NASA ARC. The research carried out at RIACS must change its emphasis from year to year in response to NASA ARC's changing needs and technological opportunities. A flexible scientific staff is provided through a university faculty visitor program, a post doctoral program, and a student visitor program. Not only does this provide appropriate expertise but it also introduces scientists outside of NASA to NASA problems. A small group of core RIACS staff provides continuity and interacts with an ARC technical monitor and scientific advisory group to determine the RIACS mission. RIACS activities are reviewed and monitored by a USRA advisory council and ARC technical monitor. Research at RIACS is currently being done in the following areas: Parallel Computing; Advanced Methods for Scientific Computing; Learning Systems; High Performance Networks and Technology; Graphics, Visualization, and Virtual Environments.

Decisions on Implementing Service-Learning: Perceptions of Physical Therapist Assistant Faculty within a State Technical College System

ERIC Educational Resources Information Center

Herlitzke, Mary Ann

2012-01-01

The Commission on Accreditation of Physical Therapy Education (CAPTE) requires that graduates of physical therapist assistant programs demonstrate a commitment to social responsibility. Service-learning, a method of instruction in which students apply knowledge and skills learned in the classroom to a community need, can assist in the development…

Barriers to exotic weed management

Treesearch

Faith T. Campbell

1998-01-01

In order to increase effective efforts to reduce the impacts of invasive alien plant species· on our natural areas, we must overcome numerous barriers. Some of these are technical in nature, e.g., determining the most appropriate control method for a specific species in a particular ecosystem, or devising a better program to exclude new invasive plant species from our...

Workers' Attitudes to Technical Change: An Integrated Survey of Research. Industrial Relations Aspects of Manpower Policy 2.

ERIC Educational Resources Information Center

Touraine, Alain; And Others

Methods for encouraging positive worker attitude and behavior toward change were examined to provide a basis for re-evaluation of current policies and programs relating to introduction of technological changes. The literature reviewed is presented in sections of: (1) "The Worker and the Occupational System," by Claude Durand, (2)…

Development of Students' Conceptual Thinking by Means of Video Analysis and Interactive Simulations at Technical Universities

ERIC Educational Resources Information Center

Hockicko, Peter; Krišták, Luboš; Nemec, Miroslav

2015-01-01

Video analysis, using the program Tracker (Open Source Physics), in the educational process introduces a new creative method of teaching physics and makes natural sciences more interesting for students. This way of exploring the laws of nature can amaze students because this illustrative and interactive educational software inspires them to think…

Teacher Candidates' Attitudes to Using Oral History in History Education

ERIC Educational Resources Information Center

Demircioglu, Ebru

2016-01-01

The aim of this research is to determine the views of history teacher candidates towards an oral history project carried out in the Special Teaching Method Course of the history pedagogy program of the Fatih Faculty of Education (FFE) at Karadeniz Technical University in Turkey. An open-ended questionnaire and semi-structured interview were the…

Aprendizaje en grupo en el laboratorio de idiomas (Group Learning in the Language Laboratory).

ERIC Educational Resources Information Center

Monteverde G., Luisa

1971-01-01

This paper describes a teaching method, presently in the experimental stage, that advocates the use of a programed instruction model in the language laboratory, with students working in homogeneous groups of three. The author describes the technical construction and operation of the language laboratory which allows three students to work together…

How Attitude toward the Behavior, Subjective Norm, and Perceived Behavioral Control Affects Information Security Behavior Intention

ERIC Educational Resources Information Center

Johnson, David P.

2017-01-01

The education sector is at high risk for information security (InfoSec) breaches and in need of improved security practices. Achieving data protections cannot be through technical means alone. Addressing the human behavior factor is required. Security education, training, and awareness (SETA) programs are an effective method of addressing human…

Approaches in the Treatment of Adolescents with Emotional and Substance Abuse Problems. Technical Assistance Publication Series Number 1.

ERIC Educational Resources Information Center

Fleisch, Brahm

This report reviews the impact of substance abuse and mental health problems among the adolescent population, examines the research issues and treatment delivery system, identifies model modalities and programs to address the needs of adolescents, and makes practical recommendations on the implementation of effective treatment methods for youths.…

Learning Style Preferences of Adult Students Enrolled in Career Technical Education Programs

ERIC Educational Resources Information Center

Standridge, Gloria A.

2010-01-01

The Problem: The problem to be addressed by this study is the abundance of low-performing American schools that do not sufficiently prepare students with the updated vocational skills and higher order knowledge skills required to compete in the global economy. Method: A qualitative study was used as a survey approach to determine the…

Basic Skills Assessment Program. Technical Report.

ERIC Educational Resources Information Center

Los Angeles County Superintendent of Schools, CA.

This is the second technical report on the Basic Skills Assessment Program for the Department of Defense Dependents Schools (DoDDS). The report includes a summary of 1979-80 testing activities organized into five chapters. The first chapter provides an overview of report contents and a brief history of the testing program. The second chapter…

Mature Programs of Study: Examining Policy Implementation at the Local Level. Final Report

ERIC Educational Resources Information Center

Alfeld, Corinne; Bhattacharya, Sharika

2013-01-01

The 2006 Carl D. Perkins Career and Technical Education Act required that all career technical education (CTE) programs offer secondary to postsecondary programs of study (POS), which integrate rigorous academics, offer dual enrollment options, and lead to an industry-recognized degree or credential. Focused on improving students' transition to…

Cobra Strikes! High-Performance Car Inspires Students, Markets Program

ERIC Educational Resources Information Center

Jenkins, Bonita

2008-01-01

Nestled in the Lower Piedmont region of upstate South Carolina, Piedmont Technical College (PTC) is one of 16 technical colleges in the state. Automotive technology is one of its most popular programs. The program features an instructive, motivating activity that the author describes in this article: building a high-performance car. The Cobra…

48 CFR 227.7104 - Contracts under the Small Business Innovation Research (SBIR) Program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Data and Computer Software—Small Business Innovation Research (SBIR) Program, when technical data or computer software will be generated during performance of contracts under the SBIR program. (b) Under the clause at 252.227-7018, the Government obtains SBIR data rights in technical data and computer software...

48 CFR 227.7104 - Contracts under the Small Business Innovation Research (SBIR) Program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Data and Computer Software—Small Business Innovation Research (SBIR) Program, when technical data or computer software will be generated during performance of contracts under the SBIR program. (b) Under the clause at 252.227-7018, the Government obtains SBIR data rights in technical data and computer software...

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 5: Catalog of IPAD technical program elements

NASA Technical Reports Server (NTRS)

Gillette, W. B. (Editor); Southall, J. W. (Editor)

1973-01-01

The catalog is presented of technical program elements which are required to support the design activities for a subsonic and supersonic commercial transport. Information for each element consists of usage and storage information, ownership, status and an abstract describing the purpose of the element.

Building Interest in Math and Science for Rural and Underserved Elementary School Children Using Robots

ERIC Educational Resources Information Center

Matson, Eric; DeLoach, Scott; Pauly, Robyn

2004-01-01

The "Robot Roadshow Program" is designed to increase the interest of elementary school children in technical disciplines, specifically math and science. The program focuses on children from schools categorized as rural or underserved, which often have limited access to advanced technical resources. We developed the program using robots…

Supporting Minority-Serving Institutions in Their Program Improvement Efforts: A Responsive Technical Assistance Approach

ERIC Educational Resources Information Center

Bay, Mary; Lopez-Reyna, Norma A.; Guillory, Barbara L.

2012-01-01

To reform a special education teacher preparation program can be gratifying, difficult, complex, political, and urgently needed. The Monarch Center, a federally funded technical assistance center, was established to guide and support minority-serving institutions in their efforts to improve their teacher preparation programs. Four guidelines…

Kentucky Career and Technical Teacher Education Programs/Ongoing Issues

ERIC Educational Resources Information Center

Workman, Ed; Stubbs, Joyce

2012-01-01

What is Career and Technical Education (CTE)? How does one identify and recognized strong CTE educational programs? And after one has answers to the first two questions, how does one successfully align CTE teacher education (CTTE) programs across large institutions such as colleges within universities, or in Kentucky's endeavor within universities…

75 FR 70013 - Medicare Program; Inpatient Rehabilitation Facility Prospective Payment System for Federal Fiscal...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-16

... Insurance; and Program No. 93.774, Medicare-- Supplementary Medical Insurance Program) Dated: November 9...: Correction notice. SUMMARY: This document corrects a technical error that appeared in the notice published in... of July 22, 2010 (75 FR 42836), there was a technical error that we are identifying and correcting in...

A Review of Technical Communication Programs Outside the United States.

ERIC Educational Resources Information Center

Alred, Gerald J.

2001-01-01

Examines technical communication programs outside the United States and comments on such features as their location in the university structure, links with public relations, the inclusion of internships or practicums, the balance of theory and practice, and typical course offerings. Lists a dozen major programs in seven countries. Concludes that…

How to Recognize a Quality Technical Education Program.

ERIC Educational Resources Information Center

Doty, Charles R.

Criteria for the evaluation of quality technical educational programs must be identified if follow-up studies are to be effective. Current research shows that problems in the development of such criteria include the tendency to evaluate programs on the basis of organizational structure rather than on the quality of the instructional program…

Methods for evaluating and ranking transportation energy conservation programs

NASA Astrophysics Data System (ADS)

Santone, L. C.

1981-04-01

The energy conservation programs are assessed in terms of petroleum savings, incremental costs to consumers probability of technical and market success, and external impacts due to environmental, economic, and social factors. Three ranking functions and a policy matrix are used to evaluate the programs. The net present value measure which computes the present worth of petroleum savings less the present worth of costs is modified by dividing by the present value of DOE funding to obtain a net present value per program dollar. The comprehensive ranking function takes external impacts into account. Procedures are described for making computations of the ranking functions and the attributes that require computation. Computations are made for the electric vehicle, Stirling engine, gas turbine, and MPG mileage guide program.

Improving the 'how' and 'what' decisions of elite table tennis players.

PubMed

Raab, Markus; Masters, Rich S W; Maxwell, Jonathan P

2005-06-01

Training methods in sport usually focus on improving either technical or tactical aspects of performance, ignoring the fact that successful performance requires the athlete to simultaneously decide what movement to perform and how it should be executed. Young elite table tennis players were trained, in a first phase, to improve their forehand and backhand movements and, in a second phase, to make a tactical switch between forehand and backhand movements. Half of the players took part in behavioral training focusing on how to perform the required movements, whereas half received additional video feedback about their technical and tactical performance (decision training). The results indicate that improvements of how decisions (techniques) and what decisions (tactics) can occur as a consequence of combining technical and tactical training. These results were stable in delayed Post-test analyses of competitive matches. It was concluded that a combination of both technical and tactical training is beneficial to elite table tennis performers, particularly during early seasonal training programs.

Outcomes of an Independent Review and Guidelines for the Implementation of a Program Review Model. Volume II. Technical Report.

ERIC Educational Resources Information Center

Carvell Education Managment Planning, Inc., Los Angeles, CA.

The second part of a report on a comprehensive review of the credit instructional programs offered by Pasadena City College (PCC), this volume contains a technical description of the data collection and assembly procedures used in the program review and provides guidelines for the implementation of the program review model. The first section…

Measures of Success: A Survey of Selected Vocational and Technical Education Programs in Florida which Train Students in Occupations Requiring Licenses.

ERIC Educational Resources Information Center

Florida State Advisory Council on Vocational and Technical Education, Tallahassee.

A study of 13 vocational and technical education programs in Florida was conducted which represented an attempt to identify valid and reliable sources of data whereby some vocational programs might be evaluated in specified terms of effectiveness. The programs selected for study were among those which require graduating students to pass licensing…

Proceedings of the Annual Meeting of the Council for Programs in Technical and Scientific Communication (24th, Austin, Texas, October 16-18, 1997).

ERIC Educational Resources Information Center

Council for Programs in Technical and Scientific Communication.

Based on the theme of connections in technical and scientific communication, this proceedings presents 47 papers delivered at the 1997 annual meeting of the Council for Programs in Technical and Scientific Communication (CPTSC). Papers in the proceedings are divided into 10 sections: (1) Theoretical Connections; (2) Legal and Ethical Connections;…

Economic Returns to Sub-Baccalaureate Technical Education: A Study of Labor Market Outcomes for Manufacturing Engineering Technologist and Technician Education (METTE) Programs in the Wisconsin Technical College System

ERIC Educational Resources Information Center

Matheny, Christopher J.

2013-01-01

The purpose of this study is to examine the labor market outcomes of sub-baccalaureate education for individuals attending Manufacturing Engineering Technologist and Technician Education (METTE) programs in the Wisconsin Technical College System. Increasingly, public policy for postsecondary education and economic development, as well as decisions…

Meeting the Needs of Career and Technical Education: Observations from Graduates of a High School Health Science Program

ERIC Educational Resources Information Center

Avey, Matthew R.

2012-01-01

Career and Technical education has been around for some time, and has often been shaped by the current economic landscape of the country. While current evolving trends focus on relevance for students in the school setting, a coexistence with college preparation curriculum is now the new trend in modern technical education. New programs have…

OSH technical reference manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-11-01

In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinentmore » to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.« less

Esophageal dilation with metal olives under fiberoptic endoscopic control: a new technic.

PubMed

Mangla, J C; Kothari, T

1980-03-01

Three patients with marked strictures (less than 20 Fr.) of the esophagus are described. It was very difficult to institute any simple program of dilation because mercury-filled Maloney bougies will buckle and rigid endoscopy with dilation carries a great risk of perforation. Using the conventional methods such as Eder-Puestow dilation results in significant waste of time, money and fluoroscopic help. A new technic is described whereby a successful dilation was carried out under direct visual control by endoscopic dilation of the esophagus with Eder-Puestow dilators. Since all these patients require esophagoscopy, the dilation procedure can be done in the same sitting.

Director's discretionary fund

NASA Technical Reports Server (NTRS)

1993-01-01

This technical memorandum contains brief technical papers describing research and technology development programs sponsored by the ARC Director's Discretionary Fund during fiscal year 1992 (Oct. 1991 through Sep. 1992). An appendix provides administrative information for each of the 45 sponsored research programs.

Pennsylvania Department of Transportation's Local Technical Assistance Program (LTAP).

DOT National Transportation Integrated Search

2010-11-01

The Pennsylvania Department of Transportations (PennDOT) Local Technical Assistance Program : (LTAP) was awarded to the Pennsylvania State Association of Township Supervisors (PSATS), with the : contract start date of December 1, 2005. PSATS led t...

DOE Office of Scientific and Technical Information (OSTI.GOV)

This fact provides information on the Strategic Technical Assistance Response Team (START) Program, a U.S. Department of Energy Office of Indian Energy Policy and Programs (DOE-IE) initiative to provide technical expertise to support the development of next-generation energy projects in Indian Country.

Technical basis for external dosimetry at the Waste Isolation Pilot Plant (WIPP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradley, E.W.; Wu, C.F.; Goff, T.E.

1993-12-31

The WIPP External Dosimetry Program, administered by Westinghouse Electric Corporation, Waste Isolation Division, for the US Department of Energy (DOE), provides external dosimetry support services for operations at the Waste Isolation Pilot Plant (WIPP) Site. These operations include the receipt, experimentation with, storage, and disposal of transuranic (TRU) wastes. This document describes the technical basis for the WIPP External Radiation Dosimetry Program. The purposes of this document are to: (1) provide assurance that the WIPP External Radiation Dosimetry Program is in compliance with all regulatory requirements, (2) provide assurance that the WIPP External Radiation Dosimetry Program is derived from amore » sound technical base, (3) serve as a technical reference for radiation protection personnel, and (4) aid in identifying and planning for future needs. The external radiation exposure fields are those that are documented in the WIPP Final Safety Analysis Report.« less

Analytical Chemistry Laboratory Progress Report for FY 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Boparai, A.S.; Bowers, D.L.

The purpose of this report is to summarize the activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for Fiscal Year (FY) 1994 (October 1993 through September 1994). This annual report is the eleventh for the ACL and describes continuing effort on projects, work on new projects, and contributions of the ACL staff to various programs at ANL. The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of analytical chemistry support services to the scientific and engineering programs at ANL. The ACL also has a research program inmore » analytical chemistry, conducts instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems. Some routine or standard analyses are done, but it is common for the Argonne programs to generate unique problems that require significant development of methods and adaption of techniques to obtain useful analytical data. The ACL has four technical groups -- Chemical Analysis, Instrumental Analysis, Organic Analysis, and Environmental Analysis -- which together include about 45 technical staff members. Talents and interests of staff members cross the group lines, as do many projects within the ACL. The Chemical Analysis Group uses wet- chemical and instrumental methods for elemental, compositional, and isotopic determinations in solid, liquid, and gaseous samples and provides specialized analytical services. Major instruments in this group include an ion chromatograph (IC), an inductively coupled plasma/atomic emission spectrometer (ICP/AES), spectrophotometers, mass spectrometers (including gas-analysis and thermal-ionization mass spectrometers), emission spectrographs, autotitrators, sulfur and carbon determinators, and a kinetic phosphorescence uranium analyzer.« less

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

NASA Technical Reports Server (NTRS)

Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

1982-01-01

Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

12 CFR 705.10 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Technical assistance. 705.10 Section 705.10... DEVELOPMENT REVOLVING LOAN PROGRAM FOR CREDIT UNIONS § 705.10 Technical assistance. NCUA may provide technical... or NCUA. NCUA will base technical assistance on funds availability, the needs of the participating...

Technical approach to groundwater restoration. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-11-01

The Technical Approach to Groundwater Restoration (TAGR) provides general technical guidance to implement the groundwater restoration phase of the Uranium Mill Tailings Remedial Action (UMTRA) Project. The TAGR includes a brief overview of the surface remediation and groundwater restoration phases of the UMTRA Project and describes the regulatory requirements, the National Environmental Policy Act (NEPA) process, and regulatory compliance. A section on program strategy discusses program optimization, the role of risk assessment, the observational approach, strategies for meeting groundwater cleanup standards, and remedial action decision-making. A section on data requirements for groundwater restoration evaluates the data quality objectives (DQO) andmore » minimum data required to implement the options and comply with the standards. A section on sits implementation explores the development of a conceptual site model, approaches to site characterization, development of remedial action alternatives, selection of the groundwater restoration method, and remedial design and implementation in the context of site-specific documentation in the site observational work plan (SOWP) and the remedial action plan (RAP). Finally, the TAGR elaborates on groundwater monitoring necessary to evaluate compliance with the groundwater cleanup standards and protection of human health and the environment, and outlines licensing procedures.« less

Evaluating disease management program effectiveness: an introduction to time-series analysis.

PubMed

Linden, Ariel; Adams, John L; Roberts, Nancy

2003-01-01

Currently, the most widely used method in the disease management (DM) industry for evaluating program effectiveness is referred to as the "total population approach." This model is a pretest-posttest design, with the most basic limitation being that without a control group, there may be sources of bias and/or competing extraneous confounding factors that offer a plausible rationale explaining the change from baseline. Furthermore, with the current inclination of DM programs to use financial indicators rather than program-specific utilization indicators as the principal measure of program success, additional biases are introduced that may cloud evaluation results. This paper presents a non-technical introduction to time-series analysis (using disease-specific utilization measures) as an alternative, and more appropriate, approach to evaluating DM program effectiveness than the current total population approach.

48 CFR 825.870 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical assistance. 825... SOCIOECONOMIC PROGRAMS FOREIGN ACQUISITION Other International Agreements and Coordination 825.870 Technical assistance. Contracting officers may obtain technical information or guidance on international agreements and...

Use of Mini-Grant to Disseminate Evidence-Based Interventions for Cancer Prevention and Control.

PubMed

Kegler, Michelle C; Carvalho, Michelle L; Ory, Marcia; Kellstedt, Deb; Friedman, Daniela B; McCracken, James Lyndon; Dawson, Glenna; Fernandez, Maria

2015-01-01

Mini-grants are an increasingly common tool for engaging communities in evidence-based interventions for promoting public health. This article describes efforts by 4 Centers for Disease Control and Prevention/National Cancer Institute-funded Cancer Prevention and Control Research Network centers to design and implement mini-grant programs to disseminate evidence-based interventions for cancer prevention and control. This article also describes source of evidence-based interventions, funding levels, selection criteria, time frame, number and size of grants, types of organizations funded, selected accomplishments, training and technical assistance, and evaluation topics/methods. Grant size ranged from $1000 to $10 000 (median = $6250). This mini-grant opportunity was characterized by its emphasis on training and technical assistance for evidence-based programming and dissemination of interventions from National Cancer Institute's Research-Tested Intervention Programs and Centers for Disease Control and Prevention's Guide to Community Preventive Services. All projects had an evaluation component, although they varied in scope. Mini-grant processes described can serve as a model for organizations such as state health departments working to bridge the gap between research and practice.

Progress and future direction for the interim safe storage and disposal of Hanford high-level waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kinzer, J.E.; Wodrich, D.D.; Bacon, R.F.

This paper describes the progress made at the largest environmental cleanup program in the United States. Substantial advances in methods to start interim safe storage of Hanford Site high-level wastes, waste characterization to support both safety- and disposal-related information needs, and proceeding with cost-effective disposal by the U.S. Department of Energy (DOE) and its Hanford Site contractors, have been realized. Challenges facing the Tank Waste Remediation System (TWRS) Program, which is charged with the dual and parallel missions of interim safe storage and disposal of the high-level tank waste stored at the Hanford Site, are described. In these times ofmore » budget austerity, implementing an ongoing program that combines technical excellence and cost effectiveness is the near-term challenge. The technical initiatives and progress described in this paper are made more cost effective by DOE`s focus on work force productivity improvement, reduction of overhead costs, and reduction, integration and simplification of DOE regulations and operations requirements to more closely model those used in the private sector.« less

Transportable educational programs for scientific and technical professionals: More effective utilization of automated scientific and technical data base systems

NASA Technical Reports Server (NTRS)

Dominick, Wayne D.

1987-01-01

This grant final report executive summary documents a major, long-term program addressing innovative educational issues associated with the development, administration, evaluation, and widespread distribution of transportable educational programs for scientists and engineers to increase their knowledge of, and facilitate their utilization of automated scientific and technical information storage and retrieval systems. This educational program is of very broad scope, being targeted at Colleges of Engineering and Colleges of Physical sciences at a large number of colleges and universities throughout the United States. The educational program is designed to incorporate extensive hands-on, interactive usage of the NASA RECON system and is supported by a number of microcomputer-based software systems to facilitate the delivery and usage of the educational course materials developed as part of the program.

JPL Innovation Foundry

NASA Technical Reports Server (NTRS)

Sherwood, Brent; McCleese, Daniel J.

2012-01-01

NASA supports the community of mission principal investigators by helping them ideate, mature, and propose concepts for new missions. As NASA's Federally Funded Research and Development Center (FFRDC), JPL is a primary resource for providing this service. The environmental context for the formulation lifecycle evolves continuously. Contemporary trends include: more competitors; more-complex mission ideas; scarcer formulation resources; and higher standards for technical evaluation. Derived requirements for formulation support include: stable, clear, reliable methods tailored for each stage of the formulation lifecycle; on-demand access to standout technical and programmatic subject-matter experts; optimized, outfitted facilities; smart access to learning embodied in a vast oeuvre of prior formulation work; hands-on method coaching. JPL has retooled its provision of integrated formulation lifecycle support to PIs, teams, and program offices in response to this need. This mission formulation enterprise is the JPL Innovation Foundry.

Probabilistic Structural Analysis Theory Development

NASA Technical Reports Server (NTRS)

Burnside, O. H.

1985-01-01

The objective of the Probabilistic Structural Analysis Methods (PSAM) project is to develop analysis techniques and computer programs for predicting the probabilistic response of critical structural components for current and future space propulsion systems. This technology will play a central role in establishing system performance and durability. The first year's technical activity is concentrating on probabilistic finite element formulation strategy and code development. Work is also in progress to survey critical materials and space shuttle mian engine components. The probabilistic finite element computer program NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) is being developed. The final probabilistic code will have, in the general case, the capability of performing nonlinear dynamic of stochastic structures. It is the goal of the approximate methods effort to increase problem solving efficiency relative to finite element methods by using energy methods to generate trial solutions which satisfy the structural boundary conditions. These approximate methods will be less computer intensive relative to the finite element approach.

Support Equipment Management in the F/A-18 Program

DTIC Science & Technology

1986-12-01

or character (such as manuals and drawings) of a scientific or technical nature. Computer programs and related software are not technical data...documentation of computer programs and related software are. Also excluded are financial data or other information related to contract administration. 6...management in the F/A-18 program . Graeser, Kenneth S. http://hdl.handle.net/10945/22133 Downloaded from NPS Archive: Calhoun NAVAL POSTGRADUATE SCHOOL Monterey

Inventory of Academic Programs. Volume Three. Public Junior and Community Colleges, Regional Technical Institute. A Planning Document of the Alabama Commission on Higher Education.

ERIC Educational Resources Information Center

Alabama State Commission on Higher Education, Montgomery.

An inventory of academic programs offered for credit and learning to an academic award offered by Alabama's public junior and community colleges and by the Regional Technical Institute as of June 1, 1985, is presented. For each college and program, charts indicate program titles, levels of degrees offered, and accreditation status. Included are…

Contributing to Tourism Industry Vitality of a Natural Resource Based Region through Educational/Technical Assistance. Staff Paper Series P83-20.

ERIC Educational Resources Information Center

Blank, Uel; And Others

From 1979 to 1982 an extension education program provided assistance to the tourism industry in rural communities adjoining northeastern Minnesota's Boundary Waters Canoe Area (BWCA). Program activities involved needs assessment, educational and technical assistance to communities and tourism-related firms, marketing programs, grants management…

Accounting Technology Associate Degree. Louisiana Technical Education Program and Course Standards. Competency-Based Postsecondary Curriculum Outline from Bulletin 1822.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This document outlines the curriculum of Louisiana's accounting technology associate degree program, which is a 6-term (77-credit hour) competency-based program designed to prepare students for employment as accounting technicians providing technical administrative support to professional accountants and other financial management personnel.…

Fifty Indices of Effectiveness Regarding the Program Advisory Committees in Minnesota's Technical Colleges: A Working Paper. Effective Advisory Committees Project.

ERIC Educational Resources Information Center

Mercer, John W.; Meunier, Greg R.

This document, which was developed by a task force whose members represent the instructional, student support service, administrative, and executive ranks of technical colleges with very diverse sizes, locations, and programs, lists 50 proposed indices of effectiveness regarding the program advisory committees (ACs) in Minnesota's technical…

A Descriptive Study of the Classroom Instruction Component of the ESEA Title VII Bilingual Education Program. Technical Report.

ERIC Educational Resources Information Center

Cardenas, Rene F.; And Others

The technical report portion of a national survey of bilingual education programs funded under Title VII of the Elementary and Secondary Education Act is presented. The study, conducted during 1979-83, describes the characteristics of the programs' classroom instruction component. Basic project directors and parent advisory committee chairpersons…

The Rock Valley College Career Advancement Program.

ERIC Educational Resources Information Center

Rock Valley Coll., Rockford, IL.

The Career Advancement Program (CAP) is a joint effort by a 2-year college and industrial firms in its district to expand educational opportunities, to match college programs to local needs, and to help industry meet its present and future technical manpower needs. CAP has worked to attract students, full- or part-time, to technical training.…

Non-Technical Medical Care: An In-Home Care Program.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Human Services, Oklahoma City.

This document describes the Non-Technical Medical Care (NTMC) program, a personal care service offered by the Oklahoma Department of Human Services to eligible persons in their own homes. These NTMC program goals are listed: to provide personal care services to frail elderly and disabled persons, allowing them to remain in their homes; and to…

Annual Technical Progress Report for Emergency School Assistance Program, Title 45, 1970-71.

ERIC Educational Resources Information Center

Lindsey, Randall B.

This paper presents a technical progress report of two programs conducted with funds provided under the Emergency School Assistance Program. One, the Mobile Learning Unit, said to have been designed to measure changes in fourth and fifth grade students' self-concept in a reorganized desegregated school environment, focuses on whether a positive…

Methods for heat transfer and temperature field analysis of the insulated diesel

NASA Technical Reports Server (NTRS)

Morel, T.; Blumberg, P. N.; Fort, E. F.; Keribar, R.

1984-01-01

Work done during phase 1 of a three-year program aimed at developing a comprehensive heat transfer and thermal analysis methodology oriented specifically to the design requirements of insulated diesel engines is reported. The technology developed in this program makes possible a quantitative analysis of the low heat rejection concept. The program is comprehensive in that it addresses all the heat transfer issues that are critical to the successful development of the low heat rejection diesel engine: (1) in-cylinder convective and radiative heat transfer; (2) cyclic transient heat transfer in thin solid layers at component surfaces adjacent to the combustion chamber; and (3) steady-state heat conduction in the overall engine structure. The Integral Technologies, Inc. (ITI) program is comprised of a set of integrated analytical and experimental tasks. A detailed review of the ITI program approach is provided, including the technical issues which underlie it and a summay of the methods that were developed.

State Department Early Childhood Education Program Specialists' Review of the Content and Technical Quality of AEL's "Around the Bend" Pilot Tapes. Technical Report No. 30.

ERIC Educational Resources Information Center

Shively, Joe E.

In order to determine whether Appalachia Educational Laboratory (AEL) had the capacity to produce a TV series of technical quality and whose content meets criteria designed for the selection of children's television programs, two pilot tapes were produced by AEL and submitted for rating to seven early childhood education specialists from seven…

"We're living what we're learning": student perspectives in distance learning degree and certificate programs in public health.

PubMed

Cannon, M M; Umble, K E; Steckler, A; Shay, S

2001-01-01

The authors used surveys and interviews to study participants' motivations for enrolling and perceptions of the weaknesses and strengths of two distance learning programs administered by the University of North Carolina at Chapel Hill School of Public Health (SPH): the MPH in Public Health Leadership and a certificate program organized collaboratively with the Mahidol University SPH in Thailand. Chief motivations were career advancement, job performance improvement, convenience, and obtaining a degree from a reputable institution. Strengths included the curriculum, networking opportunities, and administrative and technical support. Concerns included quality of interaction with faculty and instructional methods.

Environmental Detection of Clandestine Nuclear Weapon Programs

NASA Astrophysics Data System (ADS)

Kemp, R. Scott

2016-06-01

Environmental sensing of nuclear activities has the potential to detect nuclear weapon programs at early stages, deter nuclear proliferation, and help verify nuclear accords. However, no robust system of detection has been deployed to date. This can be variously attributed to high costs, technical limitations in detector technology, simple countermeasures, and uncertainty about the magnitude or behavior of potential signals. In this article, current capabilities and promising opportunities are reviewed. Systematic research in a variety of areas could improve prospects for detecting covert nuclear programs, although the potential for countermeasures suggests long-term verification of nuclear agreements will need to rely on methods other than environmental sensing.

General introduction for the “National Field Manual for the Collection of Water-Quality Data”

USGS Publications Warehouse

,

2018-02-28

BackgroundAs part of its mission, the U.S. Geological Survey (USGS) collects data to assess the quality of our Nation’s water resources. A high degree of reliability and standardization of these data are paramount to fulfilling this mission. Documentation of nationally accepted methods used by USGS personnel serves to maintain consistency and technical quality in data-collection activities. “The National Field Manual for the Collection of Water-Quality Data” (NFM) provides documented guidelines and protocols for USGS field personnel who collect water-quality data. The NFM provides detailed, comprehensive, and citable procedures for monitoring the quality of surface water and groundwater. Topics in the NFM include (1) methods and protocols for sampling water resources, (2) methods for processing samples for analysis of water quality, (3) methods for measuring field parameters, and (4) specialized procedures, such as sampling water for low levels of mercury and organic wastewater chemicals, measuring biological indicators, and sampling bottom sediment for chemistry. Personnel who collect water-quality data for national USGS programs and projects, including projects supported by USGS cooperative programs, are mandated to use protocols provided in the NFM per USGS Office of Water Quality Technical Memorandum 2002.13. Formal training, for example, as provided in the USGS class, “Field Water-Quality Methods for Groundwater and Surface Water,” and field apprenticeships supplement the guidance provided in the NFM and ensure that the data collected are high quality, accurate, and scientifically defensible.

Rapid Development: A Content Analysis Comparison of Literature and Purposive Sampling of AFRL Rapid Reaction Projects

DTIC Science & Technology

2011-12-01

systems engineering technical and technical management processes. Technical Planning, Stakeholders Requirements Development, and Architecture Design were...Stakeholder Requirements Definition, Architecture Design and Technical Planning. A purposive sampling of AFRL rapid development program managers and engineers...emphasize one process over another however Architecture Design , Implementation scored higher among Technical Processes. Decision Analysis, Technical

The Successful Teacher in Technical Education: The Preparation of the Successful Teacher.

ERIC Educational Resources Information Center

Storm, George

The purposes of this study were to identify success factors in technical education teaching and to obtain subject matter recommendations for the improvement of technical teacher education. A national population of technical education directors offering post-secondary technical education programs in 1963 under Title III of the National Defense…

Interactive and Hands-on Methods for Professional Development of Undergraduate Researchers

NASA Astrophysics Data System (ADS)

Pressley, S. N.; LeBeau, J. E.

2016-12-01

Professional development workshops for undergraduate research programs can range from communicating science (i.e. oral, technical writing, poster presentations), applying for fellowships and scholarships, applying to graduate school, and learning about careers, among others. Novel methods of presenting the information on the above topics can result in positive outcomes beyond the obvious of transferring knowledge. Examples of innovative methods to present professional development information include 1) An interactive session on how to write an abstract where students are given an opportunity to draft an abstract from a short technical article, followed by discussion amongst a group of peers, and comparison with the "published" abstract. 2) Using the Process Oriented Guided Inquiry Learning (POGIL) method to evaluate and critique a research poster. 3) Inviting "experts" such as a Fulbright scholar graduate student to present on applying for fellowships and scholarships. These innovative methods of delivery provide more hands-on activities that engage the students, and in some cases (abstract writing) provide practice for the student. The methods also require that students develop team work skills, communicate amongst their peers, and develop networks with their cohort. All of these are essential non-technical skills needed for success in any career. Feedback from students on these sessions are positive and most importantly, the students walk out of the session with a smile on their face saying how much fun it was. Evaluating the impact of these sessions is more challenging and under investigation currently.

Hypertext and hypermedia systems in information retrieval

NASA Technical Reports Server (NTRS)

Kaye, K. M.; Kuhn, A. D.

1992-01-01

This paper opens with a brief history of hypertext and hypermedia in the context of information management during the 'information age.' Relevant terms are defined and the approach of the paper is explained. Linear and hypermedia information access methods are contrasted. A discussion of hyperprogramming in the handling of complex scientific and technical information follows. A selection of innovative hypermedia systems is discussed. An analysis of the Clinical Practice Library of Medicine NASA STI Program hypermedia application is presented. The paper concludes with a discussion of the NASA STI Program's future hypermedia project plans.

The Department of Defense Global, Laboratory-Based Influenza Surveillance Program: Technical Report on Program Methods for the 2012-2013 Influenza Season

DTIC Science & Technology

2013-10-01

revealed the emergence of two novel respiratory pathogens: Middle East Respiratory Syndrome Coronavirus (MERS-CoV) and influenza A( H7N9 ). MERS-CoV was...first identified in patients who lived in or had recent travel to the Saudi Arabian Peninsula, while influenza A( H7N9 ) was first identified in several...individuals in Eastern China. To date, MERS-CoV has shown limited human-to-human transmission, while influenza A( H7N9 ) has not shown sustained

NASA-UVA Light Aerospace Alloy and Structures Technology Program (LA2ST)

NASA Technical Reports Server (NTRS)

Gangloff, Richard P.

1991-01-01

The general objective of the Light Aerospace Alloy and Structures Technology (LA2ST) Program is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys, composites, and associated thermal gradient structures in close collaboration with Langley researchers. Specific technical objectives are established for each research project. Relevant data and basic understanding of material behavior and microstructure, new monolithic and composite alloys, advanced processing methods, new solid and fluid mechanic analyses, measurement advances, and a pool of educated graduate students are sought.

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Sometimes, It Takes a Village

ERIC Educational Resources Information Center

Taylor, Gwen; Heflin, David

2015-01-01

In this article, Gwen Taylor describes the West Kentucky Community and Technical College (WKCTC) groundbreaking program, "Accelerating Opportunity" (AO), which targeted students who are deficient in math, reading, or writing. The program uses the Washington State Board for Community & Technical Colleges' (2013) Integrated Basic…

78 FR 2449 - Office of Small Credit Unions (OSCUI) Grant Program Access for Credit Unions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-11

... availability. The OSCUI Grant Program serves as a source of financial support, in the form of technical... provides financial support in the form of technical assistance grants to LICUs. These funds help improve...

15 CFR 256.2 - The Research Associate Program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... competence, and technical supervision for defined scientific or technical research by a Research Associate when such research is complementary to and compatible with scientific or technical research being... salaries of their Research Associates and Sponsor-furnished technical assistants and secretaries of the...

Science, Technology, and Communication: Program Design in the Past, Present, and Future. Proceedings of the Annual Meeting of the Council for Programs in Technical and Scientific Communication (26th, Santa Fe, New Mexico, October 14-16, 1999).

ERIC Educational Resources Information Center

Rude, Carolyn, Ed.

Based on the theme of the past, present, and future of science, technology, and communication programs, this proceedings presents 49 papers delivered at the 1999 annual meeting of the Council for Programs in Technical and Scientific Communication (CPTSC). Papers in the proceedings are divided into 12 subsections: The Shape of Programs: Past,…

Report of the Defense Science Board Task Force on National Aero-Space Plane (NASP) Program

NASA Technical Reports Server (NTRS)

1992-01-01

Six years ago, the Defense Science Board (DSB) initiated a review of the concept, technical basis, program content, and missions of the National Aerospace Plane (NASP) program. The report was completed in Sep. 1988, and the recommendations contributed to strengthening the technical efforts in the NASP program. Since then, substantial technological progress has been made in the technology development phase (Phase 2) of the program. Phase 2 of the program is currently scheduled to end in late Fiscal Year 1993, with a decision whether to proceed to the experimental flight vehicle phase (Phase 3) to be made at that time. This decision will be a very significant one for the Department of Defense (DoD) and the National Aeronautics and Space Administration (NASA). In February of this year, the DSB was chartered to revisit the NASP program to assess the degree to which the many technical challenges of the program have been resolved, or are likely to be resolved by the end of Phase 2.

Idaho National Laboratory Directed Research and Development FY-2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2010-03-01

The FY 2009 Laboratory Directed Research and Development (LDRD) Annual Report is a compendium of the diverse research performed to develop and ensure the INL's technical capabilities can support the future DOE missions and national research priorities. LDRD is essential to the INL - it provides a means for the laboratory to pursue novel scientific and engineering research in areas that are deemed too basic or risky for programmatic investments. This research enhances technical capabilities at the laboratory, providing scientific and engineering staff with opportunities for skill building and partnership development. Established by Congress in 1991, LDRD proves its benefitmore » each year through new programs, intellectual property, patents, copyrights, publications, national and international awards, and new hires from the universities and industry, which helps refresh the scientific and engineering workforce. The benefits of INL's LDRD research are many as shown in the tables below. Last year, 91 faculty members from various universities contributed to LDRD research, along with 7 post docs and 64 students. Of the total invention disclosures submitted in FY 2009, 7 are attributable to LDRD research. Sixty three refereed journal articles were accepted or published, and 93 invited presentations were attributable to LDRD research conducted in FY 2009. The LDRD Program is administered in accordance with requirements set in DOE Order 413.2B, accompanying contractor requirements, and other DOE and federal requirements invoked through the INL contract. The LDRD Program is implemented in accordance with the annual INL LDRD Program Plan, which is approved by the DOE, Nuclear Energy Program Secretarial Office. This plan outlines the method the laboratory uses to develop its research portfolio, including peer and management reviews, and the use of other INL management systems to ensure quality, financial, safety, security and environmental requirements and risks are appropriately handled. The LDRD Program is assessed annually for both output and process efficiency to ensure the investment is providing expected returns on technical capability enhancement. The call for proposals and project selection process for the INL LDRD program begins typically in April, with preliminary budget allocations, and submittal of the technical requests for preproposals. A call for preproposals is made at this time as well, and the preparation of full proposals follows in June and closes in July. The technical and management review follows this, and the portfolio is submitted for DOE-ID concurrence in early September. Project initiation is in early October. The technical review process is independent of, and in addition to the management review. These review processes are very stringent and comprehensive, ensuring technical viability and suitable technical risk are encompassed within each project that is selected for funding. Each proposal is reviewed by two or three anonymous technical peers, and the reviews are consolidated into a cohesive commentary of the overall research based on criteria published in the call for proposals. A grade is assigned to the technical review and the review comments and grade are released back to the principal investigators and the managers interested in funding the proposals. Management criteria are published in the call for proposals, and management comments and selection results are available for principal investigator and other interested management as appropriate. The DOE Idaho Operations Office performs a final review and concurs on each project prior to project authorization, and on major scope/budget changes should they occur during the project's implementation. This report begins with several research highlights that exemplify the diversity of scientific and engineering research performed at the INL in FY 2009. Progress summaries for all projects are organized into sections reflecting the major areas of research focus at the INL. These sections begin with the DOE-NE Nuclear Science and Technology mission support area, followed by the National and Homeland Security and the Energy and Environmental Science and Technology areas. The major INL initiatives and the INL's Distinctive Signatures areas complete the project summaries. The appendices provide information on project relevance to DOE missions and major national programs as well as an author index, list of refereed publications and index of key terms.« less

Idaho National Laboratory Annual Report FY 2013 LDRD Project Summaries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dena Tomchak

The FY 2013 LDRD Annual Report is a compendium of the diverse research performed to develop and ensure the INL’s technical capabilities support the current and future DOE missions and national research priorities. LDRD is essential to INL—it provides a means for the Laboratory to maintain scientific and technical vitality while funding highly innovative, high-risk science and technology research and development (R&D) projects. The program enhances technical capabilities at the Laboratory, providing scientific and engineering staff with opportunities to explore proof-of-principle ideas, advanced studies of innovative concepts, and preliminary technical analyses. Established by Congress in 1991, the LDRD Program provesmore » its benefit each year through new programs, intellectual property, patents, copyrights, national and international awards, and publications.« less

The NASA Scientific and Technical Information (STI) Program's Implementation of Open Archives Initiation (OAI) for Data Interoperability and Data Exchange

NASA Technical Reports Server (NTRS)

Rocker, JoAnne; Roncaglia, George J.; Heimerl, Lynn N.; Nelson, Michael L.

2002-01-01

Interoperability and data-exchange are critical for the survival of government information management programs. E-government initiatives are transforming the way the government interacts with the public. More information is to be made available through web-enabled technologies. Programs such as the NASA's Scientific and Technical Information (STI) Program Office are tasked to find more effective ways to disseminate information to the public. The NASA STI Program is an agency-wide program charged with gathering, organizing, storing, and disseminating NASA-produced information for research and public use. The program is investigating the use of a new protocol called the Open Archives Initiative (OAI) as a means to improve data interoperability and data collection. OAI promotes the use of the OAI harvesting protocol as a simple way for data sharing among repositories. In two separate initiatives, the STI Program is implementing OAI In collaboration with the Air Force, Department of Energy, and Old Dominion University, the NASA STI Program has funded research on implementing the OAI to exchange data between the three organizations. The second initiative is the deployment of OAI for the NASA technical report server (TRS) environment. The NASA TRS environment is comprised of distributed technical report servers with a centralized search interface. This paper focuses on the implementation of OAI to promote interoperability among diverse data repositories.

The NASA Scientific and Technical Information Program: Exploring challenges, creating opportunities

NASA Technical Reports Server (NTRS)

Sepic, Ronald P.

1993-01-01

The NASA Scientific and Technical Information (STI) Program offers researchers access to the world's largest collection of aerospace information. An overview of Program activities, products and services, and new directions is presented. The R&D information cycle is outlined and specific examples of the NASA STI Program in practice are given. Domestic and international operations and technology transfer activities are reviewed and an agenda for the STI Program NASA-wide is presented. Finally, the incorporation of Total Quality Management and evaluation metrics into the STI Program is discussed.

Monitored Natural Attenuation as a Remediation Strategy for Nuclear Power Plant Applications

NASA Astrophysics Data System (ADS)

Kim, K.; Bushart, S.

2009-12-01

A NRC Information Notice (IN 2006-13) was produced to inform holders of nuclear operating licenses “of the occurrence of radioactive contamination of ground water at multiple facilities due to undetected leakage from facility structures, systems, or components (SSCs) that contain or transport radioactive fluids” so that they could consider actions, as appropriate, to avoid similar problems. To reinforce their commitment to environmental stewardship the nuclear energy industry has committed to improving management of situations that have the potential to lead to the inadvertent release of radioactive fluids. This Industry Groundwater Protection Initiative, finalized in June 2007 as [NEI 07-07], calls for implementation and improvement of on-site groundwater monitoring programs and enhanced communications with stakeholders and regulators about situations related to inadvertent releases. EPRI developed its Groundwater Protection Program to provide the nuclear energy industry with the technical support needed to implement the Industry Groundwater Initiative. An objective of the EPRI Groundwater Protection Program is to provide the nuclear industry with technically sound guidance for implementing and enhancing on-site groundwater monitoring programs. EPRI, in collaboration with the EPRI Groundwater Protection Committee of utility members, developed the EPRI Groundwater Protection Guidelines for Nuclear Power Plants (EPRI Report 1015118, November 2007), which provides site-specific guidance for implementing a technically sound groundwater monitoring program. The guidance applies a graded approach for nuclear plants to tailor a technically effective and cost efficient groundwater monitoring program to the site’s hydrogeology and risk for groundwater contamination. As part of the Groundwater Protection Program, EPRI is also investigating innovative remediation technologies for addressing low-level radioactive contamination in soils and groundwater at nuclear power plant sites. One of these remediation technologies is monitored natural attenuation (MNA), which has been widely used in other industries for the remediation of contaminants in soil and groundwater. Monitored natural attenuation (MNA) is a non-intervention, but not a no-action, groundwater and soil remediation approach that involves monitoring the dilution, dispersion, and decay of contaminants to meet remediation objectives. MNA has been commonly applied at sites where soil and groundwater have been contaminated by volatile organic compounds. This method has also been applied to remediation of radiological contamination at U.S. DOE facilities and decommissioning nuclear power plant sites. The EPRI published report (1016764) provides guidance for implementing MNA at nuclear power plants for remediation of radiological contaminants in groundwater and soil. The goal of the EPRI Groundwater Protection program is to bring together experience and technologies - both from within the nuclear industry and other industries - to support the industry’s commitment to environmental stewardship. Results from the program are being published in an extensive series of reports and software, and are being communicated to members in an annual EPRI Groundwater Protection technical exchange workshop.

Manufacturing Methods and Technology Program Plan, CY 1986

DTIC Science & Technology

1986-02-01

Sada Barik ) C: (201) 5 32- 4 035 Fort Monmouth, NJ 07T03 AV: 992-4995 DESCOM U.S. Army Depot Systems Command ATTN: AMSDS-RM-EM (-Mr. Mike Ahearn) C...A.MSETL-PC-SI-I (Mr. Sada Barik ) (-r, ATTN: AMSEL-POD-P-G (Messrs. Feddeler, Esposito, Resnic) Cdt ATTN: RD&E Technical Documents Center PM, 6ITTN: AMCPM

The Learning and Development of Low-Skilled Workers Training to Become Surgical Technologists

ERIC Educational Resources Information Center

Dyer, Judith Sandra

2010-01-01

The purpose of this case study was to explore how low-skilled workers who participated in a health care training program learned to acquire the technical, cognitive, and developmental competencies they needed to gain skilled employment in higher-level positions in the field and thus advance their careers. The data methods used were: (1) in-depth…

Fifth SIAM conference on geometric design 97: Final program and abstracts. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-31

The meeting was divided into the following sessions: (1) CAD/CAM; (2) Curve/Surface Design; (3) Geometric Algorithms; (4) Multiresolution Methods; (5) Robotics; (6) Solid Modeling; and (7) Visualization. This report contains the abstracts of papers presented at the meeting. Proceding the conference there was a short course entitled ``Wavelets for Geometric Modeling and Computer Graphics``.

Factors and Processes that Impact Use of Utah Community/State College Contract Training: A Mixed Methods Study

ERIC Educational Resources Information Center

Bryant, Debra

2014-01-01

The shortage of skilled labor and the consequent need for workforce training have become critical issues for American businesses in our fast changing, highly technical, and competitive, global economy. College contract training programs are one potential source for meeting the growing need for training. The purpose of this research was to develop…

Lebron FINAL REPORT Standardized Procedures for Use of Nucleic Acid-Based Tools SERDP PROJECT ER-1561. Strategic Environmental Research and Development Program, Washington, DC, USA

EPA Science Inventory

Technical Approach A technology review on the status of MBTs was performed at the beginning of the project to determine MBT use in other industries. The review focused project goals and activities, which included: 1) Comparing qPCR to non-PCR-based enumeration methods to valid...

An Effective Health and Medical Technical Authority

NASA Technical Reports Server (NTRS)

Fogarty, Jennifer A.

2009-01-01

The NASA Governance model directed the formation of three Technical Authorities, Engineering; Safety and Mission Assurance; and Health and Medical, to ensure that risks are identified and adjudicated efficiently and transparently in concert with the spaceflight programs and projects. The Health and Medical Technical Authority (HMTA) has been implemented at the Johnson Space Center (JSC) and consists of the Chief Medical Office (CMO), the Deputy CMO, and HMTA Delegates. The JSC HMTA achieves the goals of risk identification and adjudication through the discharge of the appropriate technical expertise to human space flight programs and projects and the escalation of issues within program and technical authority boards. The JSC HMTA relies on subject matter experts (SMEs) in the Space Life Sciences Directorate at JSC as well as experts from other Centers to work crew health and performance issues at the technical level, develop requirements, oversee implementation and validation of requirements, and identify risks and non-compliances. Once a risk or potential noncompliance has been identified and reported to the programs or projects, the JSC HMTA begins to track it and closely monitor the program's or project's response. As a risk is developed or a non-compliance negotiated, positions from various levels of decision makers are sought at the program and project control boards. The HMTA may support a program or project position if it is satisfied with the decision making and vetting processes (ex. the subject matter expert voiced his/her concerns and all dissenting opinions were documented) and finds that the position both acknowledges the risk and cost of the mitigation and resolves the issue without changing NASA risk posture. The HMTA may disagree with a program or project position if the NASA risk posture has been elevated or obfuscated. If the HMTA does disagree with the program or project position, it will appeal to successively higher levels of authority so that risk acceptance and risk trades will be acknowledged and sanctioned at the highest appropriate level; this includes Program Managers, Mission Directorate Associate Administrators and the Agency Administrator.

Selected Technical Spin Offs from the Space Program

NASA Technical Reports Server (NTRS)

Gilmore, H. L.

1970-01-01

The report describes some of the problems which the National Aeronautics and Space Administration has encountered in getting people to understand how the general public has profited from the technical discoveries of the space program. Next, it describes NASA's Technology Utilization Program and comments on it. It then describes some of the many spin-offs from the space program. These include examples from management technology, communications, aeronautics, medicine, fabrics highway safety, and weather forecasting.

The photovoltaic properties of an Al In As/InP heterojunctions grown by LPE method. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, E.Y.

1989-10-01

Work is presented on heterojunction solar cells which were studied under the NASA/Arizona State University intern program. The heterojunction solar cells were fabricated by the liquid phase epitaxy method. The basic conversion efficiency was measured at 5 percent. It was determined that a thicker epilayer is needed, and that the density of recombination center should be reduced to give a smaller saturation current and hence a larger open-circuit voltage.

Evaluation Framework for NASA's Educational Outreach Programs

NASA Technical Reports Server (NTRS)

Berg, Rick; Booker, Angela; Linde, Charlotte; Preston, Connie

1999-01-01

The objective of the proposed work is to develop an evaluation framework for NASA's educational outreach efforts. We focus on public (rather than technical or scientific) dissemination efforts, specifically on Internet-based outreach sites for children.The outcome of this work is to propose both methods and criteria for evaluation, which would enable NASA to do a more analytic evaluation of its outreach efforts. The proposed framework is based on IRL's ethnographic and video-based observational methods, which allow us to analyze how these sites are actually used.

Configuration management program plan for Hanford site systems engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kellie, C.L.

This plan establishes the integrated management program for the evolving technical baseline developed through the systems engineering process. This configuration management program aligns with the criteria identified in the DOE Standard, DOE-STD-1073-93. Included are specific requirements for control of the systems engineering RDD-100 database, and electronic data incorporated in the database that establishes the Hanford Site Technical Baseline.

The Treatment of Assets and Income From Assets in Income-Conditioned Government Benefit Programs; Technical Papers.

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. Inst. for Research on Poverty.

These technical papers were presented at the Conference on Treatment of Assets and Income from Assets in Income Conditioned Programs. Six papers dealing with current and alternative treatments of assets and income from assets in programs that offer both cash and noncash benefits were presented. The first three authors reviewed the network of rules…