Science.gov

Sample records for microbiological processes international

  1. Summary of research on microbiological processes. International Energy Agency Subtask D, final report

    SciTech Connect

    Winters, A.L.

    1992-09-01

    Storage of thermal energy in aquifers has obvious benefits of saving energy and decreasing the consumption of fossil fuels. However, aquifer thermal energy storage (ATES), which involves groundwater aquifers as the storage medium for heat or chill, impinges on the environment. A literature review of pertinent microbiology publications (Hicks and Stewart, 1988) identified the potential for the interaction of ATES systems and microbiological processes to create a source of infectious diseases and the potential for damage to the environment. In addition, the review identified a potential for microbiological processes to develop conditions that would interfere with the operation of an ATES system. As a result of this research effort, investigators from Finland, Germany, Switzerland, and the United States have examined several ATES systems in operation and have observed that the ATES systems studied do not contribute to infectious disease transmission, do not adversely affect the environment, and do not contribute significantly to biofouling or biocorrosion.

  2. Kinetic Modeling of Microbiological Processes

    SciTech Connect

    Liu, Chongxuan; Fang, Yilin

    2012-08-26

    Kinetic description of microbiological processes is vital for the design and control of microbe-based biotechnologies such as waste water treatment, petroleum oil recovery, and contaminant attenuation and remediation. Various models have been proposed to describe microbiological processes. This editorial article discusses the advantages and limiation of these modeling approaches in cluding tranditional, Monod-type models and derivatives, and recently developed constraint-based approaches. The article also offers the future direction of modeling researches that best suit for petroleum and environmental biotechnologies.

  3. Summary of research on microbiological processes

    SciTech Connect

    Winters, A.L.

    1992-09-01

    Storage of thermal energy in aquifers has obvious benefits of saving energy and decreasing the consumption of fossil fuels. However, aquifer thermal energy storage (ATES), which involves groundwater aquifers as the storage medium for heat or chill, impinges on the environment. A literature review of pertinent microbiology publications (Hicks and Stewart, 1988) identified the potential for the interaction of ATES systems and microbiological processes to create a source of infectious diseases and the potential for damage to the environment. In addition, the review identified a potential for microbiological processes to develop conditions that would interfere with the operation of an ATES system. As a result of this research effort, investigators from Finland, Germany, Switzerland, and the United States have examined several ATES systems in operation and have observed that the ATES systems studied do not contribute to infectious disease transmission, do not adversely affect the environment, and do not contribute significantly to biofouling or biocorrosion.

  4. Microbiology

    ERIC Educational Resources Information Center

    Anderson, Lucia

    1976-01-01

    Presents classroom activities for teaching microbiology at the elementary and secondary levels. Activities demonstrate the existence of the microbial world, types of microbes, and their growth needs and effects in nature. (MLH)

  5. Microbiology

    ERIC Educational Resources Information Center

    Spooner, D.

    1973-01-01

    Describes various types of training programs carried out in the study of microbiology. Indicates that the need for new energy sources and the expansion of medical schools and food industry may lead to an increasing demand for qualified microbiologists. (CC)

  6. [Publication rates of Turkish medical specialty and doctorate theses on Medical Microbiology, Clinical Microbiology and Infectious Diseases disciplines in international journals].

    PubMed

    Sipahi, Oğuz Reşat; Caglayan Serin, Derya; Pullukcu, Hüsnü; Tasbakan, Meltem; Köseli Ulu, Demet; Yamazhan, Tansu; Arda, Bilgin; Sipahi, Hilal; Ulusoy, Sercan

    2014-04-01

    Writing a thesis is mandatory for getting a postgraduate medical degree in Turkey. Publication of the results of the thesis in an indexed journal makes the results available to researchers, however publication rate is usually low. The aim of this retrospective observational study was to investigate the publication rate of Turkish Infectious Diseases and Clinical Microbiology, Medical Microbiology specialty theses and Microbiology doctorate theses in international peer-review journals. On August 17th 2007, the thesis database of the Council of Higher Education of the Republic of Turkey (YOK) where all specialization and doctorate theses are recorded obligatorily, was searched for Infectious Diseases and Clinical Microbiology and Medical Microbiology specialty and Microbiology doctorate theses. Assuming that publication of a thesis would last at least six months, theses dated to February 2007 and after were excluded. The publication rate of those theses was found out by searching Science Citation Index-Expanded database for thesis author and supervisor between August 17-September 12, 2007. Chi-square test was used for statistical analysis. Our search yielded a total of 834 theses dated from 1997 to 2007, however 10 of them were excluded, since they were dated to February 2007 or after. It was found that the overall publication rate was 11.4% (94/824). The publication rates for Microbiology doctorate, Medical Microbiology and Infectious Diseases and Clinical Microbiology specialty theses were 13.7% (34/249), 10.7% (33/309) and 10.2% (27/266), respectively, with no statistical significance (p> 0.05). It was determined that nine (9.6%) of the 94 published theses belonged to 1997-2001 period, whereas 85 (80.4%) were in 2002-2007 period (p< 0.05). The probable reason for this increase was thought to be related with the updated criteria of YOK carried out in 2000 for academic promotions, nevertheless the publication rate of the investigated theses in international peer

  7. Evaluation of an online program to teach microbiology to internal medicine residents.

    PubMed

    Guarner, Jeannette; Burd, Eileen M; Kraft, Colleen S; Armstrong, Wendy S; Lenorr, Kenya; Spicer, Jennifer O; Martin, Donna; del Rio, Carlos

    2015-01-01

    Microbiology rounds are an integral part of infectious disease consultation service. During microbiology rounds, we highlight microbiology principles using vignettes. We created case-based, interactive, microbiology online modules similar to the vignettes presented during microbiology rounds. Since internal medicine residents rotating on our infectious disease elective have limited time to participate in rounds and learn microbiology, our objective was to evaluate the use of the microbiology online modules by internal medicine residents. We asked residents to complete 10 of 25 online modules during their infectious disease elective. We evaluated which modules they chose and the change in their knowledge level. Forty-six internal medicine residents completed assessments given before and after accessing the modules with an average of 11/20 (range, 6 to 19) and 16/20 (range, 9 to 20) correct questions, respectively (average improvement, 5 questions; P = 0.0001). The modules accessed by more than 30 residents included those related to Clostridium difficile, anaerobes, Candida spp., Streptococcus pneumoniae, influenza, Mycobacterium tuberculosis, and Neisseria meningitidis. We demonstrated improved microbiology knowledge after completion of the online modules. This improvement may not be solely attributed to completing the online modules, as fellows and faculty may have provided additional microbiology education during the rotation.

  8. Evaluation of an Online Program To Teach Microbiology to Internal Medicine Residents

    PubMed Central

    Burd, Eileen M.; Kraft, Colleen S.; Armstrong, Wendy S.; Lenorr, Kenya; Spicer, Jennifer O.; Martin, Donna; del Rio, Carlos

    2014-01-01

    Microbiology rounds are an integral part of infectious disease consultation service. During microbiology rounds, we highlight microbiology principles using vignettes. We created case-based, interactive, microbiology online modules similar to the vignettes presented during microbiology rounds. Since internal medicine residents rotating on our infectious disease elective have limited time to participate in rounds and learn microbiology, our objective was to evaluate the use of the microbiology online modules by internal medicine residents. We asked residents to complete 10 of 25 online modules during their infectious disease elective. We evaluated which modules they chose and the change in their knowledge level. Forty-six internal medicine residents completed assessments given before and after accessing the modules with an average of 11/20 (range, 6 to 19) and 16/20 (range, 9 to 20) correct questions, respectively (average improvement, 5 questions; P = 0.0001). The modules accessed by more than 30 residents included those related to Clostridium difficile, anaerobes, Candida spp., Streptococcus pneumoniae, influenza, Mycobacterium tuberculosis, and Neisseria meningitidis. We demonstrated improved microbiology knowledge after completion of the online modules. This improvement may not be solely attributed to completing the online modules, as fellows and faculty may have provided additional microbiology education during the rotation. PMID:25392364

  9. Microbiology and Crew Medical Events on the International Space Station

    NASA Technical Reports Server (NTRS)

    Oubre, Cherie M.; Charvat, Jacqueline M.; Kadwa, Biniafer; Taiym, Wafa; Ott, C. Mark; Pierson, Duane; Baalen, Mary Van

    2014-01-01

    The closed environment of the International Space Station (ISS) creates an ideal environment for microbial growth. Previous studies have identified the ubiquitous nature of microorganisms throughout the space station environment. To ensure safety of the crew, microbial monitoring of air and surface within ISS began in December 2000 and continues to be monitored on a quarterly basis. Water monitoring began in 2009 when the potable water dispenser was installed on ISS. However, it is unknown if high microbial counts are associated with inflight medical events. The microbial counts are determined for the air, surface, and water samples collected during flight operations and samples are returned to the Microbiology laboratory at the Johnson Space Center for identification. Instances of microbial counts above the established microbial limit requirements were noted and compared inflight medical events (any non-injury event such as illness, rashes, etc.) that were reported during the same calendar-quarter. Data were analyzed using repeated measures logistic regression for the forty-one US astronauts flew on ISS between 2000 and 2012. In that time frame, instances of microbial counts being above established limits were found for 10 times for air samples, 22 times for surface samples and twice for water. Seventy-eight inflight medical events were reported among the astronauts. A three times greater risk of a medical event was found when microbial samples were found to be high (OR = 3.01; p =.007). Engineering controls, crew training, and strict microbial limits have been established to mitigate the crew medical events and environmental risks. Due to the timing issues of sampling and the samples return to earth, identification of particular microorganisms causing a particular inflight medical event is difficult. Further analyses are underway.

  10. Microbiological quality of water processed and bottled in Zimbabwe.

    PubMed

    Okagbue, R N; Dlamini, N R; Siwela, M; Mpofu, F

    2002-01-01

    A total of sixty samples of bottled water processed in Zimbabwe by three companies, were analysed microbiologically, to assess the relative safety of locally processed bottled water. The samples were from different batches and from different storage conditions and the analyses were for total viable counts and coliforms. Four (6.7%) and seven (11.7%) samples were found to exceed the recommended maximum total viable and coliform counts, respectively. There was a low incidence of Staphylococus aureus (3.3%), Pseudomonas species (6.7%) and Bacillus species (5%). Overall, the work shows that locally bottled water is generally safe, microbiologically, though it is necessary to continue with precautionary measures because any lapse in hygiene may lead to microbial proliferation.

  11. Microbiological Quality Assessment of Frozen Fish and Fish Processing Materials from Bangladesh.

    PubMed

    Sanjee, Sohana Al; Karim, Md Ekramul

    2016-01-01

    The present study aims at the microbiological analysis of export oriented frozen fishes, namely, Jew fish, Tongue Sole fish, Cuttle fish, Ribbon fish, Queen fish, and fish processing water and ice from a view of public health safety and international trade. Microbiological analysis includes the determination of total viable aerobic count by standard plate count method and enumeration of total coliforms and fecal coliforms by most probable number method. The presence of specific fish pathogens such as Salmonella spp. and Vibrio cholerae were also investigated. The TVAC of all the samples was estimated below 5 × 10(5) cfu/g whereas the total coliforms and fecal coliforms count were found below 100 MPN/g and 10 MPN/g, respectively, which meet the acceptable limit specified by International Commission of Microbiological Specification for Food. The microbiological analysis of water and ice also complies with the specifications having TVAC < 20 cfu/mL, and total coliforms and fecal coliforms count were below the limit detection of the MPN method. Specific fish pathogens such as Salmonella sp. and V. cholerae were found absent in all the samples under the investigation. From this study, it can be concluded that the investigated frozen fishes were eligible for export purpose and also safe for human consumption. PMID:27019847

  12. Microbiological Quality Assessment of Frozen Fish and Fish Processing Materials from Bangladesh

    PubMed Central

    Sanjee, Sohana Al; Karim, Md. Ekramul

    2016-01-01

    The present study aims at the microbiological analysis of export oriented frozen fishes, namely, Jew fish, Tongue Sole fish, Cuttle fish, Ribbon fish, Queen fish, and fish processing water and ice from a view of public health safety and international trade. Microbiological analysis includes the determination of total viable aerobic count by standard plate count method and enumeration of total coliforms and fecal coliforms by most probable number method. The presence of specific fish pathogens such as Salmonella spp. and Vibrio cholerae were also investigated. The TVAC of all the samples was estimated below 5 × 105 cfu/g whereas the total coliforms and fecal coliforms count were found below 100 MPN/g and 10 MPN/g, respectively, which meet the acceptable limit specified by International Commission of Microbiological Specification for Food. The microbiological analysis of water and ice also complies with the specifications having TVAC < 20 cfu/mL, and total coliforms and fecal coliforms count were below the limit detection of the MPN method. Specific fish pathogens such as Salmonella sp. and V. cholerae were found absent in all the samples under the investigation. From this study, it can be concluded that the investigated frozen fishes were eligible for export purpose and also safe for human consumption. PMID:27019847

  13. Microbiological Quality Assessment of Frozen Fish and Fish Processing Materials from Bangladesh.

    PubMed

    Sanjee, Sohana Al; Karim, Md Ekramul

    2016-01-01

    The present study aims at the microbiological analysis of export oriented frozen fishes, namely, Jew fish, Tongue Sole fish, Cuttle fish, Ribbon fish, Queen fish, and fish processing water and ice from a view of public health safety and international trade. Microbiological analysis includes the determination of total viable aerobic count by standard plate count method and enumeration of total coliforms and fecal coliforms by most probable number method. The presence of specific fish pathogens such as Salmonella spp. and Vibrio cholerae were also investigated. The TVAC of all the samples was estimated below 5 × 10(5) cfu/g whereas the total coliforms and fecal coliforms count were found below 100 MPN/g and 10 MPN/g, respectively, which meet the acceptable limit specified by International Commission of Microbiological Specification for Food. The microbiological analysis of water and ice also complies with the specifications having TVAC < 20 cfu/mL, and total coliforms and fecal coliforms count were below the limit detection of the MPN method. Specific fish pathogens such as Salmonella sp. and V. cholerae were found absent in all the samples under the investigation. From this study, it can be concluded that the investigated frozen fishes were eligible for export purpose and also safe for human consumption.

  14. Microbiology and atmospheric processes: chemical interactions of Primary Biological Aerosols

    NASA Astrophysics Data System (ADS)

    Deguillaume, L.; Leriche, M.; Amato, P.; Ariya, P. A.; Delort, A.-M.; Pöschl, U.; Chaumerliac, N.; Bauer, H.; Flossmann, A. I.; Morris, C. E.

    2008-02-01

    This paper discusses the influence of bioaerosols on atmospheric chemistry and vice versa through microbiological and chemical properties and processes. Several studies have shown that biological matter represents a significant fraction of air particulate matter and hence affects the microstructure and water uptake of aerosol particles. Moreover, airborne micro-organisms can transform chemical constituents of the atmosphere by metabolic activity. Recent studies have emphasized the viability of bacteria and metabolic degradation of organic substances in cloud water. On the other hand, the viability and metabolic activity of airborne micro-organisms depend strongly on physical and chemical atmospheric parameters such as temperature, pressure, radiation, pH value and nutrient concentrations. In spite of recent advances, however, our knowledge of the microbiological and chemical interactions of primary biological particles in the atmosphere is rather limited. Further targeted investigations combining laboratory experiments, field measurements, and modelling studies will be required to characterize the chemical feedbacks, microbiological activities at the air/snow/water interface supplied to the atmosphere.

  15. Microbiology and atmospheric processes: chemical interactions of primary biological aerosols

    NASA Astrophysics Data System (ADS)

    Deguillaume, L.; Leriche, M.; Amato, P.; Ariya, P. A.; Delort, A.-M.; Pöschl, U.; Chaumerliac, N.; Bauer, H.; Flossmann, A. I.; Morris, C. E.

    2008-07-01

    This paper discusses the influence of primary biological aerosols (PBA) on atmospheric chemistry and vice versa through microbiological and chemical properties and processes. Several studies have shown that PBA represent a significant fraction of air particulate matter and hence affect the microstructure and water uptake of aerosol particles. Moreover, airborne micro-organisms, namely fungal spores and bacteria, can transform chemical constituents of the atmosphere by metabolic activity. Recent studies have emphasized the viability of bacteria and metabolic degradation of organic substances in cloud water. On the other hand, the viability and metabolic activity of airborne micro-organisms depend strongly on physical and chemical atmospheric parameters such as temperature, pressure, radiation, pH value and nutrient concentrations. In spite of recent advances, however, our knowledge of the microbiological and chemical interactions of PBA in the atmosphere is rather limited. Further targeted investigations combining laboratory experiments, field measurements, and modelling studies will be required to characterize the chemical feedbacks, microbiological activities at the air/snow/water interface supplied to the atmosphere.

  16. Microbiological quality of milk from small processing units in Senegal.

    PubMed

    Breurec, Sebastien; Poueme, Rodrigue; Fall, Cheikh; Tall, Adama; Diawara, Abdoulaye; Bada-Alambedji, Rianatou; Broutin, Cecile; Leclercq, Alexandre; Garin, Benoit

    2010-05-01

    Consumption of milk and dairy products has increased significantly in Senegal in the last decade, and a large part of the local production comes from small processing units spread all over the country. We collected 85 bulk-tank milk samples from 68 smallholder dairy farms throughout the territory. Microbiological quality of milk samples was analyzed according to the official standards. Further, raw milk and pasteurized milk were screened for Mycobacterium bovis, Coxiella burnetii, and anti-Brucella abortus antibodies. Ninety-three percent of pasteurized milk samples, 92% of raw milk samples, and 81% of sour milk samples failed to meet official standards. Pathogens detected in milk were C. burnetii (6/41, 15%), which seems to be endemic in Senegal, coagulase-positive staphylococci (18/70, 26%), and Salmonella Johannesburg in one sample. Further analysis of coagulase-positive staphylococci isolated from samples containing more than 10(4) colony-forming units per gram showed the presence of enterotoxigenic strains in 9 of the 10 samples. These results confirm the poor microbiological quality of milk produced by small units in Senegal, especially and surprisingly of pasteurized milk. This highlights the need to implement good hygiene practices, particularly in the postpasteurization process, and an effective monitoring throughout the production and delivery chain.

  17. Microbiological Characterization and Concerns of the International Space Station Internal Active Thermal Control System

    NASA Technical Reports Server (NTRS)

    Roman, Monsi C.; Wieland, Paul O.

    2005-01-01

    Since January 1999, the chemical the International Space Station Thermal Control System (IATCS) and microbial state of (ISS) Internal Active fluid has been monitored by analysis of samples returned to Earth. Key chemical parameters have changed over time, including a drop in pH from the specified 9.5 +/- 0.5 ta = 58.4, an increase in the level of total inorganic carbon (TIC), total organic carbon (TOC) and dissolved nickel (Ni) in the fluid, and a decrease in the phosphate (PO,) level. In addition, silver (AS) ion levels in the fluid decreased rapidly as Ag deposited on internal metallic surfaces of the system. The lack of available Ag ions coupled with changes in the fluid chemistry has resulted in a favorable environment for microbial growth. Counts of heterotrophic bacteria have increased from less than 10 colony-forming units (CFUs)/l00 mL to l0(exp 6) to l0(exp 7) CFUs/100 mL. The increase of the microbial population is of concern because uncontrolled microbiological growth in the IATCS can contribute to deterioration in the performance of critical components within the system and potentially impact human health if opportunistic pathogens become established and escape into the cabin atmosphere. Micro-organisms can potentially degrade the coolant chemistry; attach to surfaces and form biofilms; lead to biofouling of filters, tubing, and pumps; decrease flow rates; reduce heat transfer; initiate and accelerate corrosion; and enhance mineral scale formation. The micro- biological data from the ISS IATCS fluid, and approaches to addressing the concerns, are summarized in this paper.

  18. Intra-Genomic Internal Transcribed Spacer Region Sequence Heterogeneity and Molecular Diagnosis in Clinical Microbiology

    PubMed Central

    Zhao, Ying; Tsang, Chi-Ching; Xiao, Meng; Cheng, Jingwei; Xu, Yingchun; Lau, Susanna K. P.; Woo, Patrick C. Y.

    2015-01-01

    Internal transcribed spacer region (ITS) sequencing is the most extensively used technology for accurate molecular identification of fungal pathogens in clinical microbiology laboratories. Intra-genomic ITS sequence heterogeneity, which makes fungal identification based on direct sequencing of PCR products difficult, has rarely been reported in pathogenic fungi. During the process of performing ITS sequencing on 71 yeast strains isolated from various clinical specimens, direct sequencing of the PCR products showed ambiguous sequences in six of them. After cloning the PCR products into plasmids for sequencing, interpretable sequencing electropherograms could be obtained. For each of the six isolates, 10–49 clones were selected for sequencing and two to seven intra-genomic ITS copies were detected. The identities of these six isolates were confirmed to be Candida glabrata (n = 2), Pichia (Candida) norvegensis (n = 2), Candida tropicalis (n = 1) and Saccharomyces cerevisiae (n = 1). Multiple sequence alignment revealed that one to four intra-genomic ITS polymorphic sites were present in the six isolates, and all these polymorphic sites were located in the ITS1 and/or ITS2 regions. We report and describe the first evidence of intra-genomic ITS sequence heterogeneity in four different pathogenic yeasts, which occurred exclusively in the ITS1 and ITS2 spacer regions for the six isolates in this study. PMID:26506340

  19. Intra-Genomic Internal Transcribed Spacer Region Sequence Heterogeneity and Molecular Diagnosis in Clinical Microbiology.

    PubMed

    Zhao, Ying; Tsang, Chi-Ching; Xiao, Meng; Cheng, Jingwei; Xu, Yingchun; Lau, Susanna K P; Woo, Patrick C Y

    2015-10-22

    Internal transcribed spacer region (ITS) sequencing is the most extensively used technology for accurate molecular identification of fungal pathogens in clinical microbiology laboratories. Intra-genomic ITS sequence heterogeneity, which makes fungal identification based on direct sequencing of PCR products difficult, has rarely been reported in pathogenic fungi. During the process of performing ITS sequencing on 71 yeast strains isolated from various clinical specimens, direct sequencing of the PCR products showed ambiguous sequences in six of them. After cloning the PCR products into plasmids for sequencing, interpretable sequencing electropherograms could be obtained. For each of the six isolates, 10-49 clones were selected for sequencing and two to seven intra-genomic ITS copies were detected. The identities of these six isolates were confirmed to be Candida glabrata (n=2), Pichia (Candida) norvegensis (n=2), Candida tropicalis (n=1) and Saccharomyces cerevisiae (n=1). Multiple sequence alignment revealed that one to four intra-genomic ITS polymorphic sites were present in the six isolates, and all these polymorphic sites were located in the ITS1 and/or ITS2 regions. We report and describe the first evidence of intra-genomic ITS sequence heterogeneity in four different pathogenic yeasts, which occurred exclusively in the ITS1 and ITS2 spacer regions for the six isolates in this study.

  20. Evaluation of the HACCP system in a university canteen: microbiological monitoring and internal auditing as verification tools.

    PubMed

    Osimani, Andrea; Aquilanti, Lucia; Tavoletti, Stefano; Clementi, Francesca

    2013-04-17

    Food safety is essential in mass catering. In Europe, Regulation (EC) No. 852/2004 requires food business operators to put in place, implement and maintain permanent procedures based on Hazard Analysis and Critical Control Point (HACCP) principles. Each HACCP plan is specifically implemented for the processing plant and processing methods and requires a systematic collection of data on the incidence, elimination, prevention, and reduction of risks. In this five-year-study, the effectiveness of the HACCP plan of a University canteen was verified through periodic internal auditing and microbiological monitoring of meals, small equipment, cooking tools, working surfaces, as well as hands and white coats of the canteen staff. The data obtained revealed no safety risks for the consumers, since Escherichia coli, Salmonella spp. and Listeria monocytogenes were never detected; however, a quite discontinuous microbiological quality of meals was revealed. The fluctuations in the microbial loads of mesophilic aerobes, coliforms, Staphylococcus aureus, Bacillus cereus, and sulphite-reducing clostridia were mainly ascribed to inadequate handling or processing procedures, thus suggesting the need for an enhancement of staff training activities and for a reorganization of tasks. Due to the wide variety of the fields covered by internal auditing, the full conformance to all the requirements was never achieved, though high scores, determined by assigning one point to each answer which matched with the requirements, were achieved in all the years.

  1. Campylobacter in: Microbiological Troubleshooting in the Industrial Food Processing Environment

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Campylobacter species are enteric pathogens and are considered one of the leading foodborne disease agents in the United States causing an estimated 2.1 to 2.4 million cases of gastroenteritis annually. This chapter, intended for inclusion in the book, Microbiological Troubleshooting in the Indust...

  2. Microbiology of the frankfurter process: salmonella and natural aerobic flora.

    PubMed

    Palumbo, S A; Huhtanen, C N; Smith, J L

    1974-04-01

    Salmonella senftenberg 775W added to frankfurter emulsion was killed during normal processing in the smoke house when internal product temperature was 71.1 C (160 F) or above. The thermal destruction point of S. senftenberg 775W in frankfurters (temperature at which no viable cells were detected) was a function of the length of time of the process rather than of the starting number of cells. Heating of frankfurters to 73.9 C (165 F) substantially reduced the total non-salmonella count. For total non-salmonella bacterial flora and salmonella, relatively little thermal destruction occurred below 43.3 C (110 F). The heating step can bring about a 7-log cycle decrease (10(8) to 10(1)/g) of bacteria present in the raw emulsion. The flora of this high-bacteriological-count raw emulsion was predominantly gram-negative rods. Variation in the number of bacteria (both total and salmonella) surviving at various temperatures during processing was attributed to slight variations in the temperature pattern of the smoke house during its operation. An integration process was devised which allowed calculation of exposure to temperatures above 110 F (43.3 C) on the basis of degree-minutes. Plots of degree-minutes versus log of surviving bacteria were linear. The salmonella plot had a greater slope than that of the total non-salmonella flora, indicating that salmonellae are more heat sensitive than the bacterial population as a whole. The predominant bacteria surviving the heating step were micrococci. These micrococci were able to increase in number in or on the frankfurters during storage at 5 C. PMID:4596752

  3. Microbiological detection of bacteria in animal products seized in baggage of international air passengers to Brazil.

    PubMed

    de Melo, Cristiano Barros; de Sá, Marcos Eielson Pinheiro; Sabino, Valéria Mourão; de Fatima Boechat-Fernandes, Maria; Santiago, Marco Túlio; Schwingel, Fábio Fraga; Freitas, Cleverson; Magioli, Carlos Alberto; Cabral-Pinto, Sergio; McManus, Concepta; Seixas, Luiza

    2015-01-01

    Airline travel favours the transmission of diseases, given the short time it takes to travel long distances. In this study, animal products without health certificates seized in international air passengers' baggage at Guarulhos (GRU) and Galeão (GIG) airports in Brazil underwent a microbiological evaluation. Analyses (1610) were carried out on 322 seizures to test for the presence of total and thermotolerant coliforms, as well as Staphylococcus aureus counts and the presence of Listeria monocytogenes and Salmonella. Most seizures analysed showed coliform contamination and coliforms were present above acceptable limits in 83.4% (40/48) of the products that had some type of contamination. The second most prevalent microorganism found was L. monocytogenes in 22.9% (11/48) and S. aureus was cultivated in 14.58% (7/48) of seizures. Among the items seized in the present work, Salmonella was found in one seizure of pig sausage. Contamination of animal products with microbiological pathogens of importance to public health and indicators of the bad quality of the food were shown in the present study.

  4. Microbiological detection of bacteria in animal products seized in baggage of international air passengers to Brazil.

    PubMed

    de Melo, Cristiano Barros; de Sá, Marcos Eielson Pinheiro; Sabino, Valéria Mourão; de Fatima Boechat-Fernandes, Maria; Santiago, Marco Túlio; Schwingel, Fábio Fraga; Freitas, Cleverson; Magioli, Carlos Alberto; Cabral-Pinto, Sergio; McManus, Concepta; Seixas, Luiza

    2015-01-01

    Airline travel favours the transmission of diseases, given the short time it takes to travel long distances. In this study, animal products without health certificates seized in international air passengers' baggage at Guarulhos (GRU) and Galeão (GIG) airports in Brazil underwent a microbiological evaluation. Analyses (1610) were carried out on 322 seizures to test for the presence of total and thermotolerant coliforms, as well as Staphylococcus aureus counts and the presence of Listeria monocytogenes and Salmonella. Most seizures analysed showed coliform contamination and coliforms were present above acceptable limits in 83.4% (40/48) of the products that had some type of contamination. The second most prevalent microorganism found was L. monocytogenes in 22.9% (11/48) and S. aureus was cultivated in 14.58% (7/48) of seizures. Among the items seized in the present work, Salmonella was found in one seizure of pig sausage. Contamination of animal products with microbiological pathogens of importance to public health and indicators of the bad quality of the food were shown in the present study. PMID:25466683

  5. Microbiological study of fresh herbs from retail premises uncovers an international outbreak of salmonellosis.

    PubMed

    Elviss, N C; Little, C L; Hucklesby, L; Sagoo, S; Surman-Lee, S; de Pinna, E; Threlfall, E J

    2009-08-31

    This Local Authorities Co-ordinators of Regulatory Services/Health Protection Agency study was prompted by the increasing concern regarding the microbiological safety of ready-to-eat salad vegetable products, particularly fresh herbs. During May to October 2007, 3760 ready-to-eat fresh herbs, of different varieties, were sampled across the UK to assess their microbiological safety in relation to salmonella contamination and levels of Escherichia coli. Sixty (1.6%) herb samples were found to be of unsatisfactory quality according to Regulation (EC) No. 2073/2005 on the microbiological criteria of foodstuffs, i.e. contaminated with Salmonella spp. and/or containing E. coli at >10(3) cfu/g. When criteria in the PHLS Microbiological Guidelines for some ready-to-eat foods (2000) were used, 117 (3.9%) of herb samples were of unsatisfactory quality due to the presence of salmonella and/or E. coli at > or = 10(2) cfu/g. Eighteen (0.5%) samples of six different herb types were contaminated with Salmonella spp.: identified as serotypes Senftenberg (8), Agona (2), Anatum (1), Durban (1), Javiana (1), Mgulani (1), Montevideo (1), Unnamed (I 16:g, t: z42) (1), Virchow (1) and mixed Newport & Virchow (1). In each case the retailer and the UK Food Standards Agency were immediately informed and remedial action taken. Samples contaminated with S. Senftenberg were specifically associated with basil grown in Israel. Thirty-two human cases of S. Senftenberg infection were subsequently identified throughout England and Wales and a further 19 in Scotland, Denmark, The Netherlands and the USA. The strain of S. Senftenberg identified from the basil and that from cases had an indistinguishable molecular profile, suggesting a likely connection between consumption of basil and human infection. The presence of Salmonella spp. is unacceptable in ready-to-foods such as fresh herbs. This study highlights the necessity of applying good agricultural and hygiene practices pre-, during and post

  6. Commercial Processing and its effect on the Microbiological Safety of Shell Eggs

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Though egg shell microbiology has been studied over the years, little of it describes how modern US processing conditions impact microbial populations. When safety based regulations are implemented, this information can be used to determine critical steps critical to product safety. Shell egg surf...

  7. Federating clinical data from six pediatric hospitals: process and initial results for microbiology from the PHIS+ consortium.

    PubMed

    Gouripeddi, Ramkiran; Warner, Phillip B; Mo, Peter; Levin, James E; Srivastava, Rajendu; Shah, Samir S; de Regt, David; Kirkendall, Eric; Bickel, Jonathan; Korgenski, E Kent; Precourt, Michelle; Stepanek, Richard L; Mitchell, Joyce A; Narus, Scott P; Keren, Ron

    2012-01-01

    Microbiology study results are necessary for conducting many comparative effectiveness research studies. Unlike core laboratory test results, microbiology results have a complex structure. Federating and integrating microbiology data from six disparate electronic medical record systems is challenging and requires a team of varied skills. The PHIS+ consortium which is partnership between members of the Pediatric Research in Inpatient Settings (PRIS) network, the Children's Hospital Association and the University of Utah, have used "FURTHeR' for federating laboratory data. We present our process and initial results for federating microbiology data from six pediatric hospitals.

  8. Microbiological Analysis of Rice Cake Processing in Korea.

    PubMed

    Wang, Jun; Park, Joong-Hyun; Choi, Na-Jung; Ha, Sang-Do; Oh, Deog-Hwan

    2016-01-01

    This study was conducted to evaluate the microbial contamination in rice cake materials and products during processing and in the operation environment in nonhazard analysis [and] critical control point factories. Furthermore, the environmental health of the processing facilities and the bacterial and fungal contamination on the workers' hands were investigated. Pour plate methods were used for enumeration of aerobic plate count (APC), yeast and molds (YM), Bacillus cereus, Staphylococcus aureus, and Clostridium perfringens, whereas Petrifilm count plates were used for enumeration of coliforms and Escherichia coli. The respective microbial levels of APC, coliforms, YM, and B. cereus were in the range of 2.6 to 4.7, 1.0 to 3.8, not detected (ND) to 2.9, and ND to 2.8 log CFU/g in the raw materials and in the range of 2.3 to 6.2, ND to 3.6, ND to 2.7, and ND to 3.7 log CFU/g during processing of the rice cake products. During the processing of rice cakes, APC, coliforms, YM, and B. cereus increased during soaking and smashing treatments and decreased after steaming treatment. E. coli, S. aureus, and C. perfringens were not detected in any of the raw materials and operating areas or during processing. B. cereus was detected on the operators' hands at microbial contamination levels of 1.9 ± 0.19 to 2.0 ± 0.19 log CFU/g. The results showed that B. cereus in the end product is presumably the main concern for rice cakes. In addition, the high contamination level of B. cereus during manufacturing processes, including soaking, smashing, and molding, and the absence of B. cereus from the air sampling plates indicated that the contaminated equipment showed the potential risk to cause cross-contamination.

  9. Irradiation treatment of minimally processed carrots for ensuring microbiological safety

    NASA Astrophysics Data System (ADS)

    Ashraf Chaudry, Muhammad; Bibi, Nizakat; Khan, Misal; Khan, Maazullah; Badshah, Amal; Jamil Qureshi, Muhammad

    2004-09-01

    Minimally processed fruits and vegetables are very common in developed countries and are gaining popularity in developing countries due to their convenience and freshness. However, minimally processing may result in undesirable changes in colour, taste and appearance due to the transfer of microbes from skin to the flesh. Irradiation is a well-known technology for elimination of microbial contamination. Food irradiation has been approved by 50 countries and is being applied commercially in USA. The purpose of this study was to evaluate the effect of irradiation on the quality of minimally processed carrots. Fresh carrots were peeled, sliced and PE packaged. The samples were irradiated (0, 0.5, 1.0, 2.0, 2.5, 3.0 kGy) and stored at 5°C for 2 weeks. The samples were analyzed for hardness, organoleptic acceptance and microbial load at 0, 7th and 15th day. The mean firmness of the control and all irradiated samples remained between 4.31 and 4.42 kg of force, showing no adverse effect of radiation dose. The effect of storage (2 weeks) was significant ( P< 0.05) with values ranging between 4.28 and 4.39 kg of force. The total bacterial counts at 5°C for non-irradiated and 0.5 kGy irradiated samples were 6.3×10 5 cfu/g, 3.0×10 2 and few colonies(>10) in all other irradiated samples(1.0, 2.0, 2.5 and 3.0 kGy) after 2 weeks storage. No coliform or E. coli were detected in any of the samples (radiated or control) immediately after irradiation and during the entire storage period in minimally processed carrots. A dose of 2.0 kGy completely controlled the fungal and bacterial counts. The irradiated samples (2.0 kGy) were also acceptable sensorially.

  10. Geochemical and microbiological methods for evaluating anaerobic processes in an aquifer contaminated by landfill leachate

    USGS Publications Warehouse

    Cozzarelli, I.M.; Suflita, J.M.; Ulrich, G.A.; Harris, S.H.; Scholl, M.A.; Schlottmann, J.L.; Christenson, S.

    2000-01-01

    A combined geochemical and microbiological approach was needed to delineate the biogeochemical processes occurring in an aquifer contaminated by landfill leachate in Norman, OK, where the important microbially mediated reactions in an anoxic plume were iron reduction, sulfate reduction, and methanogenesis. The highest rates of sulfate reduction (13.2 ??M/day) were detected near the water table where sulfate levels were maximal (up to 4.6 mM). The enrichment of 34S in the sulfate pools (??34S of SO42- was 67-69%0), and dissolved hydrogen measurements provided additional support for the importance of sulfate reduction near the water table. Methane was detected in the center of the plume where sulfate was depleted. Microbial incubations demonstrated concomitant sulfate reduction and methanogenesis in the anoxic portion of the plume. Although high concentrations of soluble reduced iron were detected throughout the aquifer and H2 levels were indicative of iron reduction under steady-state conditions, microbiological experiments showed that iron reduction was active only at the edges of the sulfate-depleted portion of the plume. This study demonstrates the benefits of using a combined geochemical and microbiological approach to elucidate the spatial distribution of biogeochemical processes in contaminated aquifers.A combined geochemical and microbiological approach was needed to delineate the biogeochemical processes occurring in an aquifer contaminated by landfill leachate in Norman, OK, where the important microbially mediated reactions in an anoxic plume were iron reduction, sulfate reduction, and methanogenesis. The highest rates of sulfate reduction (13.2 ??M/day) were detected near the water table where sulfate levels were maximal (up to 4.6 mM). The enrichment of 34S in the sulfate pools (??34S of SO42- was 67-69 per mil), and dissolved hydrogen measurements provided additional support for the importance of sulfate reduction near the water table. Methane was

  11. Microbiological and aflatoxin evaluation of Brazil nut pods and the effects of unit processing operations.

    PubMed

    Arrus, Katia; Blank, Greg; Clear, Randall; Holley, Richard A; Abramson, David

    2005-05-01

    Harvesting of Brazil nuts not only helps to preserve the Amazon rainforest but also provides income to individuals who would otherwise have little means of making a livelihood. Recently, the European Community has tightened the quality requirements for Brazil nuts, particularly with regard to aflatoxin levels and microbiological contamination. The objectives of this research were to gain a better understanding of the origin of aflatoxins on Brazil nuts and to microbiologically evaluate some of the operations involved in processing. In this regard, five Brazil nut pods were aseptically picked from trees located in each of three concessions of the Peruvian Amazon rainforest (Madre de Dios province). The exteriors of the pods and the nuts were examined for yeast and molds, including Aspergillus flavus and Aspergillus parasiticus, and for bacteria, including Salmonella and Escherichia coli. Brazil nuts obtained from various commercial process operations located in Peru were similarly evaluated. Exteriors of all Brazil nut pods did not contain A. parasiticus, and only pods from one concession yielded A. flavus isolates. All isolates tested were aflatoxigenic (630 to 915 ppb total aflatoxin). Coliforms, E. coli, and salmonellae were not recovered from any of the pods. Whole, in-shell nuts obtained after opening the pods yielded no A. flavus or A. parasiticus. Aflatoxins were not detected (detection limit 1.75 ppb) in any of the nuts. Whole, in-shell and shelled nuts from various process operations were all positive for A. flavus but negative for E. coli and salmonellae. Soaking of whole, in-shell nuts before cracking or shelling increased coliform numbers, whereas levels of A. flavus decreased. In order to gain a better understanding of the sanitary performance of the unit process operations, additional evaluations should be conducted on product lots processed on different days. Also, the microbiology of product processed from common lots should be followed through the

  12. [Microbiological assessment of the Gouda-type cheese-making process in a Venezuelan industry].

    PubMed

    Dáivila, Jacqueline; Reyes, Genara; Corzo, Otoniel

    2006-03-01

    The adoption of the Hazard Analysis and Critical Control Point (HACCP) system is necessary to assure the safety of the product in the cheese-making industry. The compliment of pre-requisite programs as Good Manufacture Practices (GMPs) and Sanitation Standard Operating Procedures (SSOPs) are required before the implementation of the HACCP plan. GMPs are the standards related to equipments, tools, personnel, etc. SSOPs are the procedures related to hygiene and sanitation of the plant and workers. The aim of this study was to assess the compliment of the pre-requisite programs and the microbiological conditions of the Gouda type cheese-making process in a Venezuelan processing plant before designing a HACCP plan. Samples were: (a) raw milk, pasteurized milk, curd and ripened cheese, (b) water, (c) environment of the production areas and ripening premises, (d) equipments before and after sanitation, (e) food handlers. Microbiological analyses were done according to COVENIN standards. This study showed that even though pasteurization process was effective to kill pathogen bacteria of the raw milk and the water was safe, however there are deficient manufacture practices in the hygiene as well as in sanitation of the plant and food handlers. Prerequisite programs (GMP-SSOP) of this industry need to be well established, controlled and evaluated. PMID:16786734

  13. [Microbiological assessment of the Gouda-type cheese-making process in a Venezuelan industry].

    PubMed

    Dáivila, Jacqueline; Reyes, Genara; Corzo, Otoniel

    2006-03-01

    The adoption of the Hazard Analysis and Critical Control Point (HACCP) system is necessary to assure the safety of the product in the cheese-making industry. The compliment of pre-requisite programs as Good Manufacture Practices (GMPs) and Sanitation Standard Operating Procedures (SSOPs) are required before the implementation of the HACCP plan. GMPs are the standards related to equipments, tools, personnel, etc. SSOPs are the procedures related to hygiene and sanitation of the plant and workers. The aim of this study was to assess the compliment of the pre-requisite programs and the microbiological conditions of the Gouda type cheese-making process in a Venezuelan processing plant before designing a HACCP plan. Samples were: (a) raw milk, pasteurized milk, curd and ripened cheese, (b) water, (c) environment of the production areas and ripening premises, (d) equipments before and after sanitation, (e) food handlers. Microbiological analyses were done according to COVENIN standards. This study showed that even though pasteurization process was effective to kill pathogen bacteria of the raw milk and the water was safe, however there are deficient manufacture practices in the hygiene as well as in sanitation of the plant and food handlers. Prerequisite programs (GMP-SSOP) of this industry need to be well established, controlled and evaluated.

  14. Overview of Microbiological Tests Performed During the Design of the International Space Station Environmental Control and Life Support Systems

    NASA Technical Reports Server (NTRS)

    Roman, Monsi C.; Mittelman, Marc W.

    2010-01-01

    The design and manufacturing of the main Environmental Control and Life Support Systems (ECLSS) for the United States segments of the International Space Station (ISS) was an involved process that started in the late 1980's, with the assessment and testing of competing technologies that could be used to clean the air and recycle water. It culminated in 2009 with the delivery and successful activation of the Water Recovery System (WRS) water processor (WP). The ECLSS required the work of a team of engineers and scientist working together to develop systems that could clean and/or recycle human metabolic loads to maintain a clean atmosphere and provide the crew clean water. One of the main goals of the ECLSS is to minimize the time spent by the crew worrying about vital resources not available in the vacuum of space, which allows them to spend most of their time learning to live in a microgravity environment many miles from the comforts of Earth and working on science experiments. Microorganisms are a significant part of the human body as well as part of the environment that we live in. Therefore, the ISS ECLSS design had to take into account the effect microorganisms have on the quality of stored water and wastewater, as well as that of the air systems. Hardware performance issues impacted by the accumulation of biofilm and/or microbiologically influenced corrosion were also studied during the ECLSS development stages. Many of the tests that were performed had to take into account the unique aspects of a microgravity environment as well as the challenge of understanding how to design systems that could not be sterilized or maintained in a sterile state. This paper will summarize the work of several studies that were performed to assess the impacts and/or to minimize the effects of microorganisms in the design of a closed loop life support system.

  15. Microbiological and abiotic processes in modelling longer-term marine corrosion of steel.

    PubMed

    Melchers, Robert E

    2014-06-01

    Longer term exposure of mild steel in natural (biotic) waters progresses as a bimodal function of time, both for corrosion mass loss and for pit depth. Recent test results, however, found this also for immersion in clean fresh, almost pure and triply distilled waters. This shows chlorides or microbiological activity is not essential for the electrochemical processes producing bimodal behaviour. It is proposed that the first mode is aerobic corrosion that eventually produces a non-homogeneous corroded surface and rust coverage sufficient to allow formation of anoxic niches. Within these, aggressive autocatalytic reduction then occurs under anoxic abiotic conditions, caused by sulfide species originating from the MnS inclusions typical in steels. This is consistent with Wranglen's model for abiotic anoxic crevice and pitting corrosion without external aggressive ions. In biotic conditions, metabolites from anaerobic bacterial activity within and near the anoxic niches provides additional (sulfide) species to contribute to the severity of corrosion. Limited observational evidence that supports this hypothesis is given but further investigation is required to determine all contributor(s) to the cathodic current for the electrochemical reaction. The results are important for estimating the contribution of microbiological corrosion in infrastructure applications. PMID:24067447

  16. Microbiological and abiotic processes in modelling longer-term marine corrosion of steel.

    PubMed

    Melchers, Robert E

    2014-06-01

    Longer term exposure of mild steel in natural (biotic) waters progresses as a bimodal function of time, both for corrosion mass loss and for pit depth. Recent test results, however, found this also for immersion in clean fresh, almost pure and triply distilled waters. This shows chlorides or microbiological activity is not essential for the electrochemical processes producing bimodal behaviour. It is proposed that the first mode is aerobic corrosion that eventually produces a non-homogeneous corroded surface and rust coverage sufficient to allow formation of anoxic niches. Within these, aggressive autocatalytic reduction then occurs under anoxic abiotic conditions, caused by sulfide species originating from the MnS inclusions typical in steels. This is consistent with Wranglen's model for abiotic anoxic crevice and pitting corrosion without external aggressive ions. In biotic conditions, metabolites from anaerobic bacterial activity within and near the anoxic niches provides additional (sulfide) species to contribute to the severity of corrosion. Limited observational evidence that supports this hypothesis is given but further investigation is required to determine all contributor(s) to the cathodic current for the electrochemical reaction. The results are important for estimating the contribution of microbiological corrosion in infrastructure applications.

  17. Microbiological aspects of polyphosphate injection in the processing and chill storage of poultry.

    PubMed

    Mead, G C; Adams, B W

    1979-02-01

    During commercial processing of broiler chickens, injection of polyphosphate (Puron 604 or 6040) resulted in microorganisms being added to the deep breast muscle. The level of contamination was related to the microbiological condition of the injection solution. Injection of polyphosphate had no effect on the shelf-life of fresh chilled carcasses held at 1 degree of 10 degrees C but changes were observed in the growth rate of microorganisms in the deep muscle and in the composition of the muscle microflora following storage. Cross-contamination of carcasses and the transfer of organisms from the skin to the deep muscle during injection was demonstrated with a marker strain of Clostridium perfringens. However, both processes were influenced by the number of marker organisms applied initially to the skin. The above findings are discussed in relation to the possible behaviour of any food poisoning bacteria present.

  18. Monitoring of dynamic microbiological processes using real-time flow cytometry.

    PubMed

    Arnoldini, Markus; Heck, Tobias; Blanco-Fernández, Alfonso; Hammes, Frederik

    2013-01-01

    We describe a straightforward approach to continuously monitor a variety of highly dynamic microbiological processes in millisecond resolution with flow cytometry, using standard bench-top instrumentation. Four main experimental examples are provided, namely: (1) green fluorescent protein expression by antibiotic-stressed Escherichia coli, (2) fluorescent labeling of heat-induced membrane damage in an autochthonous freshwater bacterial community, (3) the initial growth response of late stationary E. coli cells inoculated into fresh growth media, and (4) oxidative disinfection of a mixed culture of auto-fluorescent microorganisms. These examples demonstrate the broad applicability of the method to diverse biological experiments, showing that it allows the collection of detailed, time-resolved information on complex processes. PMID:24244624

  19. Microbiological aspects of polyphosphate injection in the processing and chill storage of poultry.

    PubMed Central

    Mead, G. C.; Adams, B. W.

    1979-01-01

    During commercial processing of broiler chickens, injection of polyphosphate (Puron 604 or 6040) resulted in microorganisms being added to the deep breast muscle. The level of contamination was related to the microbiological condition of the injection solution. Injection of polyphosphate had no effect on the shelf-life of fresh chilled carcasses held at 1 degree of 10 degrees C but changes were observed in the growth rate of microorganisms in the deep muscle and in the composition of the muscle microflora following storage. Cross-contamination of carcasses and the transfer of organisms from the skin to the deep muscle during injection was demonstrated with a marker strain of Clostridium perfringens. However, both processes were influenced by the number of marker organisms applied initially to the skin. The above findings are discussed in relation to the possible behaviour of any food poisoning bacteria present. PMID:216743

  20. Monitoring of Dynamic Microbiological Processes Using Real-Time Flow Cytometry

    PubMed Central

    Arnoldini, Markus; Heck, Tobias; Blanco-Fernández, Alfonso; Hammes, Frederik

    2013-01-01

    We describe a straightforward approach to continuously monitor a variety of highly dynamic microbiological processes in millisecond resolution with flow cytometry, using standard bench-top instrumentation. Four main experimental examples are provided, namely: (1) green fluorescent protein expression by antibiotic-stressed Escherichia coli, (2) fluorescent labeling of heat-induced membrane damage in an autochthonous freshwater bacterial community, (3) the initial growth response of late stationary E. coli cells inoculated into fresh growth media, and (4) oxidative disinfection of a mixed culture of auto-fluorescent microorganisms. These examples demonstrate the broad applicability of the method to diverse biological experiments, showing that it allows the collection of detailed, time-resolved information on complex processes. PMID:24244624

  1. Ultrasonic measurement device for the characterization of microbiological and biochemical processes in liquid media

    NASA Astrophysics Data System (ADS)

    Elvira, L.; Durán, C.; Sierra, C.; Resa, P.; Montero de Espinosa, F.

    2007-07-01

    A measuring device for the characterization of liquid media based on the propagation of ultrasonic waves is presented. It is a four-channel system especially designed for monitoring microbiological and biochemical processes. The liquid samples are placed in commercial glass bottles which can be sterilized. The bottles have inlet and outlet tubes, which can be used for adding substances or extracting samples during the measuring process without interruption. Magnetic stirring can be used to keep the liquid agitated for homogenization purposes. Thermal control elements assure the temperature stability during the measurement. The liquid characterization is based on the detection of amplitude and time-of-flight changes in the sample under study. The main features, operation and performance of this ultrasonic device are analysed in this work, and some measurements and preliminary results are shown.

  2. The effects of mandatory HACCP implementation on microbiological indicators of process hygiene in meat processing and retail establishments in Serbia.

    PubMed

    Tomasevic, Igor; Kuzmanović, Jelena; Anđelković, Aleksandra; Saračević, Miroslava; Stojanović, Marija M; Djekic, Ilija

    2016-04-01

    A total of 48,246 microbiological test results were collected from 130 meat processing plants and 220 meat retail facilities over a seven year period: 41 months before and 43 months after HACCP implementation. Our results confirm a strong positive effect of mandatory HACCP implementation on process hygiene indicators in meat establishments. Significant reductions were observed in the number of hygiene indicator organisms on all types of surfaces examined and types of meat establishments investigated. The improvement of process hygiene was articulated as aerobic colony count reduction of at least 1.0 log10 CFU/cm(2) for food contact surfaces and over 2 log10 CFU/cm(2) for cooling facilities (refrigerators, freezers and other meat cooling devices). Meat handlers' hands hygiene was least positively affected. The period after mandatory HACCP implementation was also marked by a steady decline of positive Enterobacteriaceae and Staphylococcus samples. Process hygiene advances for meat processing plants and meat retail facilities were similar.

  3. One-way distribution system for water for injection: process management, microbiological quality control, and meeting regulatory requirements.

    PubMed

    Jahnke, M

    2001-01-01

    The specifications for pharmaceutical water, the qualification and validation of water preparation facilities, strategies to prevent contamination by water-borne bacteria and lastly, the monitoring of microbiological purity are the topics of frequent seminars on Pharma Water Total Quality Management. The same subdivisions are used in the following paper on the process management and microbiological control of a one-way distribution system for Water for Injection. Since 1990, such a system has been in use in the production department of Pharma Hameln GmbH, a contract manufacturer of parenterals. Using this system as an example, the twin needs for flawless microbiological process control and for suitable measures to monitor water quality are discussed, which, together with extensive documentation of the qualification of the production and distribution system, ultimately led to acceptance of the system by regulatory authorities. PMID:11212418

  4. One-way distribution system for water for injection: process management, microbiological quality control, and meeting regulatory requirements.

    PubMed

    Jahnke, M

    2001-01-01

    The specifications for pharmaceutical water, the qualification and validation of water preparation facilities, strategies to prevent contamination by water-borne bacteria and lastly, the monitoring of microbiological purity are the topics of frequent seminars on Pharma Water Total Quality Management. The same subdivisions are used in the following paper on the process management and microbiological control of a one-way distribution system for Water for Injection. Since 1990, such a system has been in use in the production department of Pharma Hameln GmbH, a contract manufacturer of parenterals. Using this system as an example, the twin needs for flawless microbiological process control and for suitable measures to monitor water quality are discussed, which, together with extensive documentation of the qualification of the production and distribution system, ultimately led to acceptance of the system by regulatory authorities.

  5. Microbiological Characterization of the International Space Station Water Processor Assembly External Filter Assembly S/N 01

    NASA Technical Reports Server (NTRS)

    Weir, Natalee; Wilson, Mark; Yoets, Airan; Yoets, Airan; Molina, Thomas; Bruce, Rebekah; Sitler, Glenn; Carter, Layne

    2012-01-01

    The External Filter Assembly (EFA) S/N 01 is a mesh screen filter with a pore size of approximately 300 micron that was installed in the International Space Station (ISS) Water Processor Assembly (WPA) between the Waste Tank and the Mostly Liquid Separator (MLS) on February 11, 2010 to protect clearances in the MLS solenoid valve SV_1121_3. A removal & replacement of the EFA Filter was performed on March 22, 2011 in response to increasing pressure across the Waste Tank solenoid valve SV_1121_1 and the EFA Filter. The EFA Filter was returned on ULF6 and received in the Boeing Huntsville Laboratory on June 13, 2011. The filter was aseptically removed from the housing, and the residual water was collected for enumeration and identification of bacteria and fungi. Swab samples of the filter surface were also collected for microbiological enumeration and identification. Sample analyses were performed by Boeing Huntsville Laboratory and NASA Johnson Space Center Microbiology for comparison. Photographic documentation of the EFA filter was performed using a stereo microscope and environmental scanning electron microscope. This paper characterizes the amount and types of microorganisms on the filter surface and in the residual water from the filter housing following 1 year of utilization in the ISS WPA.

  6. Hygiene and Safety in the Meat Processing Environment from Butcher Shops: Microbiological Contamination and Listeria monocytogenes.

    PubMed

    Silva, Danilo Augusto Lopes da; Dias, Mariane Rezende; Cossi, Marcus Vinícius Coutinho; Castilho, Natália Parma Augusto de; Camargo, Anderson Carlos; Nero, Lúis Augusto

    2016-04-01

    The quality and safety of meat products can be estimated by assessing their contamination by hygiene indicator microorganisms and some foodborne pathogens, with Listeria monocytogenes as a major concern. To identify the main sources of microbiological contamination in the processing environment of three butcher shops, surface samples were obtained from the hands of employees, tables, knives, inside butcher displays, grinders, and meat tenderizers (24 samples per point). All samples were subjected to enumeration of hygiene indicator microorganisms and detection of L. monocytogenes, and the obtained isolates were characterized by their serogroups and virulence genes. The results demonstrated the absence of relevant differences in the levels of microbiological contamination among butcher shops; samples with counts higher than reference values indicated inefficiency in adopted hygiene procedures. A total of 87 samples were positive for Listeria spp. (60.4%): 22 from tables, 20 from grinders, 16 from knives, 13 from hands, 9 from meat tenderizers, and 7 from butcher shop displays. Thirty-one samples (21.5%) were positive for L. monocytogenes, indicating the presence of the pathogen in meat processing environments. Seventy-four L. monocytogenes isolates were identified, with 52 from serogroups 1/2c or 3c and 22 from serogroups 4b, 4d, 4a, or 4c. All 74 isolates were positive for hlyA, iap, plcA, actA, and internalins (inlA, inlB, inlC, and inlJ). The establishment of appropriate procedures to reduce microbial counts and control the spread of L. monocytogenes in the final steps of the meat production chain is of utmost importance, with obvious effects on the quality and safety of meat products for human consumption.

  7. Investigation of the microbial community in a microbiological additive used in a manure composting process.

    PubMed

    Wakase, Shiho; Sasaki, Hiraku; Itoh, Kikuji; Otawa, Kenichi; Kitazume, Osamu; Nonaka, Jun; Satoh, Masaaki; Sasaki, Takako; Nakai, Yutaka

    2008-05-01

    The objectives of this study were to investigate the fate of microorganisms by using cultivation methods as well as DNA analyses in a commercial microbiological additive (MA) in the course of the composting. Almost all the predominant species in the microbial succession during composting process determined by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) were in disagreement with those determined by the clone library method. None of the microbial species in the composting stages corresponded to the microorganisms identified in the MA either by the cultivation method or DNA analysis. The results in regard to predominant microorganisms of the MA detected from the liquid medium by the PCR-DGGE did not correspond with those detected from the MA itself and composting processes. Although no evidence was found that predominant species in the MA itself dominate in the composting process, predominant species diversity in the MA itself was markedly changed after culturing at different thermophilic temperatures. These results suggested that cultivable microorganisms in the MA did not become predominant in the composting process: however, some microorganisms that are detected from the MA itself by the DNA analysis may act effectively in the composting process.

  8. Studying coupled hydrological and micro-biological processes by means of tracer injections and mathematical models

    NASA Astrophysics Data System (ADS)

    Worman, A.; Kjellin, J. P.; Lindahl, A.; Johansson, H.

    2005-05-01

    To throw light on coupled hydrological, chemical and microbiological processes in treatment wetlands, this study uses both radioactive water and reactive tracers. A tracer mixture consisting of tritiated water, P-32 in the form of PO4- and N-15 in the form of N2O was injected to the 2.6 hectare large Ekeby wetland, Sweden. From the breakthrough curves of tritium, the mean residence time of water in pond 1 can be estimated to be about 3 to 3.5 days. The total injected activity of phosphorus was 17.98 GBq and about 13.73 GBq was recovered at the outlet during the investigation period ending 10 days and 16 hours after the start of the injection. This implies that 24% of the phosphate solution was removed in the November - December period in which the experiment was performed. The total injected amount of N-15 was 42.1 grams and 29.6 grams was retained at the effluent. This means that 30% of the nitrogen was either retained in the wetland or removed due to denitrification. An analysis of regular monitoring data shows that the annual removal rate in the entire wetland (each flow line passes two ponds in series) is about 50% for total phosphorus and 25% for total nitrogen. Probably, the most important mechanism for this removal is adsorption onto particulate matter and deposition. Analyses of vegetation material indicate that a certain (minor) fraction was adsorbed to submersed and emerging macrophytes, like Elodera Canadensis, Thypa sp. (Cattail) and Glyceria sp. (Manna grass). A 2D mathematical model for both water flow and solute transport could explain the N-transport through the wetland. The model accounts for the rate-limited exchange with bed sediments and denitrification in the water and bed sediment. Independent batch tests indicate a particularly high microbiological activity in the bed sediments. The rate-limited exchange with the bed limits also the denitrification capacity of the wetland.

  9. Microbiological, physicochemical and sensory parameters of dry fermented sausages manufactured with high hydrostatic pressure processed raw meat.

    PubMed

    Omer, M K; Prieto, B; Rendueles, E; Alvarez-Ordoñez, A; Lunde, K; Alvseike, O; Prieto, M

    2015-10-01

    The aim of this trial was to describe physicochemical, microbiological and organoleptic characteristics of dry fermented sausages produced from high hydrostatic pressure (HHP) pre-processed trimmings. During ripening of the meat products pH, weight, water activity (aw), and several microbiological parameters were measured at zero, eight, fifteen days and after 6weeks. Sensory characteristics were estimated at day 15 and after six weeks by a test panel by using several sensory tests. Enterobacteriaceae were not detected in sausages from HHP-processed trimmings. Fermentation was little affected, but weight and aw of the HHP-processed sausages decreased faster during ripening. HHP-treated sausages were consistently less favoured than non HHP-treated sausages, but the strategy may be an alternative approach if the process is optimized.

  10. The effects of mandatory HACCP implementation on microbiological indicators of process hygiene in meat processing and retail establishments in Serbia.

    PubMed

    Tomasevic, Igor; Kuzmanović, Jelena; Anđelković, Aleksandra; Saračević, Miroslava; Stojanović, Marija M; Djekic, Ilija

    2016-04-01

    A total of 48,246 microbiological test results were collected from 130 meat processing plants and 220 meat retail facilities over a seven year period: 41 months before and 43 months after HACCP implementation. Our results confirm a strong positive effect of mandatory HACCP implementation on process hygiene indicators in meat establishments. Significant reductions were observed in the number of hygiene indicator organisms on all types of surfaces examined and types of meat establishments investigated. The improvement of process hygiene was articulated as aerobic colony count reduction of at least 1.0 log10 CFU/cm(2) for food contact surfaces and over 2 log10 CFU/cm(2) for cooling facilities (refrigerators, freezers and other meat cooling devices). Meat handlers' hands hygiene was least positively affected. The period after mandatory HACCP implementation was also marked by a steady decline of positive Enterobacteriaceae and Staphylococcus samples. Process hygiene advances for meat processing plants and meat retail facilities were similar. PMID:26735573

  11. Microbiological contamination and resistance genes in biofilms occurring during the drinking water treatment process.

    PubMed

    Farkas, Anca; Butiuc-Keul, Anca; Ciatarâş, Dorin; Neamţu, Călin; Crăciunaş, Cornelia; Podar, Dorina; Drăgan-Bularda, Mihail

    2013-01-15

    Biofilms are the predominant mode of microbial growth in drinking water systems. A dynamic exchange of individuals occurs between the attached and planktonic populations, while lateral gene transfer mediates genetic exchange in these bacterial communities. Integrons are important vectors for the spread of antimicrobial resistance. The presence of class 1 integrons (intI1, qac and sul genes) was assessed in biofilms occurring throughout the drinking water treatment process. Isolates from general and specific culture media, covering a wide range of environmental bacteria, fecal indicators and opportunistic pathogens were tested. From 96 isolates tested, 9.37% were found to possess genetic determinants of putative antimicrobial resistance, and these occurred in both Gram-positive and Gram-negative bacteria. Class 1 integron integrase gene was present in 8.33% of bacteria, all positive for the qacEΔ1 gene. The sul1 gene was present in 3.12% of total isolates, representing 37.5% of the class 1 integron positive cells. The present study shows that biofilm communities in a drinking water treatment plant are a reservoir of class 1 integrons, mainly in bacteria that may be associated with microbiological contamination. Eight out of nine integron bearing strains (88.8%) were identified based on 16S rRNA gene sequencing as either enteric bacteria or species that may be connected to animal and anthropogenic disturbance.

  12. Microbiological risk from minimally processed packaged salads in the Dutch food chain.

    PubMed

    Pielaat, Annemarie; van Leusden, Frans M; Wijnands, Lucas M

    2014-03-01

    The objective of this study was to evaluate the microbial hazard associated with the consumption of mixed salads produced under standard conditions. The presence of Salmonella, Campylobacter spp., and Escherichia coli O157 in the Dutch production chain of mixed salads was determined. Microbial prevalence and concentration data from a microbiological surveillance study were used as inputs for the quantitative microbial risk assessment. Chain logistics, production figures, and consumption patterns were combined with the survey data for the risk assessment chain approach. The results of the sample analysis were used to track events from contamination through human illness. Wide 95% confidence intervals around the mean were found for estimated annual numbers of illnesses resulting from the consumption of mixed salads contaminated with Salmonella Typhimurium DT104 (0 to 10,300 cases), Campylobacter spp. (0 to 92,000 cases), or E. coli (0 to 800 cases). The main sources of uncertainty are the lack of decontamination data (i.e., produce washing during processing) and an appropriate dose-response relationship.

  13. Automation in Clinical Microbiology

    PubMed Central

    Ledeboer, Nathan A.

    2013-01-01

    Historically, the trend toward automation in clinical pathology laboratories has largely bypassed the clinical microbiology laboratory. In this article, we review the historical impediments to automation in the microbiology laboratory and offer insight into the reasons why we believe that we are on the cusp of a dramatic change that will sweep a wave of automation into clinical microbiology laboratories. We review the currently available specimen-processing instruments as well as the total laboratory automation solutions. Lastly, we outline the types of studies that will need to be performed to fully assess the benefits of automation in microbiology laboratories. PMID:23515547

  14. Co-occurrence of Photochemical and Microbiological Transformation Processes in Open-Water Unit Process Wetlands.

    PubMed

    Prasse, Carsten; Wenk, Jannis; Jasper, Justin T; Ternes, Thomas A; Sedlak, David L

    2015-12-15

    The fate of anthropogenic trace organic contaminants in surface waters can be complex due to the occurrence of multiple parallel and consecutive transformation processes. In this study, the removal of five antiviral drugs (abacavir, acyclovir, emtricitabine, lamivudine and zidovudine) via both bio- and phototransformation processes, was investigated in laboratory microcosm experiments simulating an open-water unit process wetland receiving municipal wastewater effluent. Phototransformation was the main removal mechanism for abacavir, zidovudine, and emtricitabine, with half-lives (t1/2,photo) in wetland water of 1.6, 7.6, and 25 h, respectively. In contrast, removal of acyclovir and lamivudine was mainly attributable to slower microbial processes (t1/2,bio = 74 and 120 h, respectively). Identification of transformation products revealed that bio- and phototransformation reactions took place at different moieties. For abacavir and zidovudine, rapid transformation was attributable to high reactivity of the cyclopropylamine and azido moieties, respectively. Despite substantial differences in kinetics of different antiviral drugs, biotransformation reactions mainly involved oxidation of hydroxyl groups to the corresponding carboxylic acids. Phototransformation rates of parent antiviral drugs and their biotransformation products were similar, indicating that prior exposure to microorganisms (e.g., in a wastewater treatment plant or a vegetated wetland) would not affect the rate of transformation of the part of the molecule susceptible to phototransformation. However, phototransformation strongly affected the rates of biotransformation of the hydroxyl groups, which in some cases resulted in greater persistence of phototransformation products.

  15. Co-occurrence of Photochemical and Microbiological Transformation Processes in Open-Water Unit Process Wetlands.

    PubMed

    Prasse, Carsten; Wenk, Jannis; Jasper, Justin T; Ternes, Thomas A; Sedlak, David L

    2015-12-15

    The fate of anthropogenic trace organic contaminants in surface waters can be complex due to the occurrence of multiple parallel and consecutive transformation processes. In this study, the removal of five antiviral drugs (abacavir, acyclovir, emtricitabine, lamivudine and zidovudine) via both bio- and phototransformation processes, was investigated in laboratory microcosm experiments simulating an open-water unit process wetland receiving municipal wastewater effluent. Phototransformation was the main removal mechanism for abacavir, zidovudine, and emtricitabine, with half-lives (t1/2,photo) in wetland water of 1.6, 7.6, and 25 h, respectively. In contrast, removal of acyclovir and lamivudine was mainly attributable to slower microbial processes (t1/2,bio = 74 and 120 h, respectively). Identification of transformation products revealed that bio- and phototransformation reactions took place at different moieties. For abacavir and zidovudine, rapid transformation was attributable to high reactivity of the cyclopropylamine and azido moieties, respectively. Despite substantial differences in kinetics of different antiviral drugs, biotransformation reactions mainly involved oxidation of hydroxyl groups to the corresponding carboxylic acids. Phototransformation rates of parent antiviral drugs and their biotransformation products were similar, indicating that prior exposure to microorganisms (e.g., in a wastewater treatment plant or a vegetated wetland) would not affect the rate of transformation of the part of the molecule susceptible to phototransformation. However, phototransformation strongly affected the rates of biotransformation of the hydroxyl groups, which in some cases resulted in greater persistence of phototransformation products. PMID:26562588

  16. Semiquantitative analysis of gaps in microbiological performance of fish processing sector implementing current food safety management systems: a case study.

    PubMed

    Onjong, Hillary Adawo; Wangoh, John; Njage, Patrick Murigu Kamau

    2014-08-01

    Fish processing plants still face microbial food safety-related product rejections and the associated economic losses, although they implement legislation, with well-established quality assurance guidelines and standards. We assessed the microbial performance of core control and assurance activities of fish exporting processors to offer suggestions for improvement using a case study. A microbiological assessment scheme was used to systematically analyze microbial counts in six selected critical sampling locations (CSLs). Nine small-, medium- and large-sized companies implementing current food safety management systems (FSMS) were studied. Samples were collected three times on each occasion (n = 324). Microbial indicators representing food safety, plant and personnel hygiene, and overall microbiological performance were analyzed. Microbiological distribution and safety profile levels for the CSLs were calculated. Performance of core control and assurance activities of the FSMS was also diagnosed using an FSMS diagnostic instrument. Final fish products from 67% of the companies were within the legally accepted microbiological limits. Salmonella was absent in all CSLs. Hands or gloves of workers from the majority of companies were highly contaminated with Staphylococcus aureus at levels above the recommended limits. Large-sized companies performed better in Enterobacteriaceae, Escherichia coli, and S. aureus than medium- and small-sized ones in a majority of the CSLs, including receipt of raw fish material, heading and gutting, and the condition of the fish processing tables and facilities before cleaning and sanitation. Fish products of 33% (3 of 9) of the companies and handling surfaces of 22% (2 of 9) of the companies showed high variability in Enterobacteriaceae counts. High variability in total viable counts and Enterobacteriaceae was noted on fish products and handling surfaces. Specific recommendations were made in core control and assurance activities

  17. Semiquantitative analysis of gaps in microbiological performance of fish processing sector implementing current food safety management systems: a case study.

    PubMed

    Onjong, Hillary Adawo; Wangoh, John; Njage, Patrick Murigu Kamau

    2014-08-01

    Fish processing plants still face microbial food safety-related product rejections and the associated economic losses, although they implement legislation, with well-established quality assurance guidelines and standards. We assessed the microbial performance of core control and assurance activities of fish exporting processors to offer suggestions for improvement using a case study. A microbiological assessment scheme was used to systematically analyze microbial counts in six selected critical sampling locations (CSLs). Nine small-, medium- and large-sized companies implementing current food safety management systems (FSMS) were studied. Samples were collected three times on each occasion (n = 324). Microbial indicators representing food safety, plant and personnel hygiene, and overall microbiological performance were analyzed. Microbiological distribution and safety profile levels for the CSLs were calculated. Performance of core control and assurance activities of the FSMS was also diagnosed using an FSMS diagnostic instrument. Final fish products from 67% of the companies were within the legally accepted microbiological limits. Salmonella was absent in all CSLs. Hands or gloves of workers from the majority of companies were highly contaminated with Staphylococcus aureus at levels above the recommended limits. Large-sized companies performed better in Enterobacteriaceae, Escherichia coli, and S. aureus than medium- and small-sized ones in a majority of the CSLs, including receipt of raw fish material, heading and gutting, and the condition of the fish processing tables and facilities before cleaning and sanitation. Fish products of 33% (3 of 9) of the companies and handling surfaces of 22% (2 of 9) of the companies showed high variability in Enterobacteriaceae counts. High variability in total viable counts and Enterobacteriaceae was noted on fish products and handling surfaces. Specific recommendations were made in core control and assurance activities

  18. [High pressure processing of spices in atmosphere of helium for decrease of microbiological contamination].

    PubMed

    Windyga, Bozena; Fonberg-Broczek, Monika; Sciezyńska, Halina; Skapska, Sylwia; Górecka, Krystyna; Grochowska, Anna; Morawski, Andrzej; Szczepek, Janusz; Karłowski, Kazimierz; Porowski, Sylwester

    2008-01-01

    The aim of the study was to investigate the microbiological decontamination of coriander and caraway when HPP technology was applied in elevated temperature in helium atmosphere. The HPP and heat treatment was conducted for 30 minutes at 800 and 1 000 MPa and temperature range was 60 - 121 degrees C. Contamination with aerobic mesophilic bacteria was decreased by about 2 logarithmic cycles. Total elimination of coliform and yeast and moulds was observed. The efficacy of HPP treatment under helium atmosphere depended on the content of the water in tested samples. It can be concluded that high pressure treatment under atmosphere of helium, combination of proper high pressure and time improved the microbiological quality of spices.

  19. International Collaborative Learning--The Facilitation Process.

    ERIC Educational Resources Information Center

    Clear, A. G.

    International collaborative learning is becoming more viable through a variety of Internet enabled software products. Group Support Systems appear to offer promise. But it is not well understood how to facilitate the teaching and learning process in electronic environments. If education is to involve an interactive process of collaborative inquiry…

  20. International Students Decision-Making Process

    ERIC Educational Resources Information Center

    Cubillo, Jose Maria; Sanchez, Joaquin; Cervino, Julio

    2006-01-01

    Purpose--The purpose of this paper is to propose a theoretical model that integrates the different groups of factors which influence the decision-making process of international students, analysing different dimensions of this process and explaining those factors which determine students' choice. Design/methodology/approach--A hypothetical model…

  1. Salty Microbiology

    ERIC Educational Resources Information Center

    Schneegurt, Mark A.; Wedel, Adrianne N.; Pokorski, Edward W.

    2004-01-01

    Using microbiology activities in the classroom is an effective way for teachers to address National Standards in the life sciences. However, common microbiology activities that involve swabbing doorknobs and hands are too risky due to the likelihood of culturing human pathogens. In addition, making sterile media and maintaining sterile conditions…

  2. An exploration of the perceptions, developmental reasoning levels, differences in learning processes, and academic achievement levels of students in introductory college microbiology

    NASA Astrophysics Data System (ADS)

    Poole, Barbara Ann Matherly

    1997-11-01

    This study explored the relationship between the grades students earned in introductory college microbiology and American College Testing scores, sex, race, age, GED or high school diploma, full-time or part-time student status, developmental reasoning levels, memory tactics, and expected achievement. The study also explored student perceptions at the beginning and the end of the microbiology courses for science preparation, expected achievement, relevancy of microbiology, and expectations for the course. Archival records for 121 freshman level and 119 sophomore level microbiology students were accessed to obtain final grades, ACT scores, sex, race, age, GED or high school diploma and full-time or part-time status. The same information was obtained for the 113 freshman level and the 85 sophomore level students who participated in the study. The study groups were given the Group Assessment of Logical Thinking to assess their level of formal reasoning ability, the Inventory of Learning Processes-Revised to assess three memory techniques, an initial perception survey, and an exit perception survey. Academic achievement in microbiology could not be predicted using composites of the predictor variables. There were significant relationships between the GALT scores and the predicted grades with both the freshman and the sophomore final grades. The Self-Efficacy Fact Retention scores and the Literal Memorization scores had significant relationships to the final grades of the freshmen but not the sophomores. There was not a significant relationship between the Deep Semantic scores and the final grades in either group. Students indicated that high school science had given them only a medium to low level of preparation for college microbiology. The sophomores felt that previous college science classes had given them a much better preparation for microbiology than did the freshmen students. Both groups expressed the importance of the laboratory experience to the understanding

  3. Assessment of Microbiologically Influenced Corrosion Potential in the International Space Station Internal Active Thermal Control System Heat Exchanger Materials: A 6-Momths Study

    NASA Technical Reports Server (NTRS)

    Roman, Monsi C.; Macuch, Patrick; McKrell, Thomas; VanDerSchijff, Ockert J.; Mitchell, Ralph

    2005-01-01

    The fluid in the Internal Active Thermal Control System (IATCS) of the International Space Station (ISS) is water based. The fluid in the ISS Laboratory Module and Node 1 initially contained a mix of water, phosphate (corrosion control), borate (pH buffer), and silver sulfate (Ag2SO4) (microbial control) at a pH of 9.5+/-0.5. Over time, the chemistry of the fluid changed. Fluid changes included a pH drop from 9.5 to 8.3 due to diffusion of carbon dioxide (CO2) through Teflon(reistered Trademark) (DuPont) hoses, increases in dissolved nickel (Ni) levels, deposition of silver (Ag) to metal surfaces, and precipitation of the phosphate (PO4) as nickel phosphate (NiPO4). The drop in pH and unavailability of a antimicrobial has provided an environment conducive to microbial growth. Microbial levels in the fluid have increased from >10 colony-forming units (CFUs)/100 ml to 10(exp 6) CFUs/100 ml. The heat exchangers in the IATCS loops are considered the weakest point in the loop because of the material thickness (=7 mil). It is made of a Ni-based braze filler/CRES 347. Results of a preliminary test performed at Hamilton Sundstrand indicated the possibility of pitting on this material at locations where Ag deposits were found. Later, tests have confirmed that chemical corrosion of the materials is a concern for this system. Accumulation of micro-organisms on surfaces (biofilm) can also result in material degradation and can amplify the damage caused by the chemical corrosion, known as microbiologically influenced corrosion (MIC). This paper will discuss the results of a 6-mo test performed to characterize and quantify the damage from microbial accumulation on the surface of the ISS/ATCS heat exchanger materials. The test was designed to quantify the damage to the materials under worst-case conditions with and without micro-organisms present at pH 8.3 and 9.5.

  4. Microbiologically-influenced corrosion damage in a water coolant header for remote process equipment

    SciTech Connect

    Jenkins, C.F.

    1995-10-01

    Stainless steel water piping, used to supply coolant for remote chemical separations equipment, developed several leaks during low-flow conditions resulting from an extended interruption of operations. All the leaks occurred at welds in the bottom zone of the pipe, which was blanketed with silt deposits from the unfiltered well water used for cooling. Ultrasonic, radiographic, and metallographic examinations of the leak sites revealed worm-hole pitting adjacent to the welds. Seepage at the penetrations was strongly acidic and resulted in corrosion on the external pipe surfaces beneath brown crusty deposits which had developed. Analyses of the water and deposits suggested a strong propensity toward microbiologically-influenced corrosion (MIC) and fouling.

  5. Model-based internal wave processing

    SciTech Connect

    Candy, J.V.; Chambers, D.H.

    1995-06-09

    A model-based approach is proposed to solve the oceanic internal wave signal processing problem that is based on state-space representations of the normal-mode vertical velocity and plane wave horizontal velocity propagation models. It is shown that these representations can be utilized to spatially propagate the modal (dept) vertical velocity functions given the basic parameters (wave numbers, Brunt-Vaisala frequency profile etc.) developed from the solution of the associated boundary value problem as well as the horizontal velocity components. Based on this framework, investigations are made of model-based solutions to the signal enhancement problem for internal waves.

  6. Agricultural Microbiology.

    ERIC Educational Resources Information Center

    Brill, Winston J.

    1981-01-01

    Elucidates strategies for applying microbiological techniques to traditional agricultural practices. Discusses the manipulation of microorganisms that live with plants and also the problems involved in the introduction of new genes into crop plants by recombinant DNA methods. (CS)

  7. Clinical Microbiology Informatics

    PubMed Central

    Sintchenko, Vitali; Rauch, Carol A.; Pantanowitz, Liron

    2014-01-01

    SUMMARY The clinical microbiology laboratory has responsibilities ranging from characterizing the causative agent in a patient's infection to helping detect global disease outbreaks. All of these processes are increasingly becoming partnered more intimately with informatics. Effective application of informatics tools can increase the accuracy, timeliness, and completeness of microbiology testing while decreasing the laboratory workload, which can lead to optimized laboratory workflow and decreased costs. Informatics is poised to be increasingly relevant in clinical microbiology, with the advent of total laboratory automation, complex instrument interfaces, electronic health records, clinical decision support tools, and the clinical implementation of microbial genome sequencing. This review discusses the diverse informatics aspects that are relevant to the clinical microbiology laboratory, including the following: the microbiology laboratory information system, decision support tools, expert systems, instrument interfaces, total laboratory automation, telemicrobiology, automated image analysis, nucleic acid sequence databases, electronic reporting of infectious agents to public health agencies, and disease outbreak surveillance. The breadth and utility of informatics tools used in clinical microbiology have made them indispensable to contemporary clinical and laboratory practice. Continued advances in technology and development of these informatics tools will further improve patient and public health care in the future. PMID:25278581

  8. Clinical microbiology informatics.

    PubMed

    Rhoads, Daniel D; Sintchenko, Vitali; Rauch, Carol A; Pantanowitz, Liron

    2014-10-01

    The clinical microbiology laboratory has responsibilities ranging from characterizing the causative agent in a patient's infection to helping detect global disease outbreaks. All of these processes are increasingly becoming partnered more intimately with informatics. Effective application of informatics tools can increase the accuracy, timeliness, and completeness of microbiology testing while decreasing the laboratory workload, which can lead to optimized laboratory workflow and decreased costs. Informatics is poised to be increasingly relevant in clinical microbiology, with the advent of total laboratory automation, complex instrument interfaces, electronic health records, clinical decision support tools, and the clinical implementation of microbial genome sequencing. This review discusses the diverse informatics aspects that are relevant to the clinical microbiology laboratory, including the following: the microbiology laboratory information system, decision support tools, expert systems, instrument interfaces, total laboratory automation, telemicrobiology, automated image analysis, nucleic acid sequence databases, electronic reporting of infectious agents to public health agencies, and disease outbreak surveillance. The breadth and utility of informatics tools used in clinical microbiology have made them indispensable to contemporary clinical and laboratory practice. Continued advances in technology and development of these informatics tools will further improve patient and public health care in the future.

  9. Microbiological investigations

    NASA Technical Reports Server (NTRS)

    Ferguson, J. K.; Taylor, G. R.; Mieszkuc, B. J.

    1975-01-01

    The crew microbiology program was conducted to evaluate lunar contamination, to detect potentially pathogenic microoganisms, to identify medically important microorganisms recovered from ill crewmen, to aid in diagnosis and treatment, and to collect microbiological data that would aid in elucidating the response of the crew microbial autoflora to the space flight environment and in evaluating the resultant effect on the crewmember. Microbiological sampling of selected sites in the command module was initiated in support of the quarantine program. During lunar quarantine missions, microbial screening was accomplished for all support personnel to be isolated with the returning crewman. Virology support for the Apollo project consisted of characterization of the viral and mycoplasma flora of the crewmembers and performance of viral serology for crewmembers, crew contacts, and key mission personnel. Procedures and results are discussed in detail.

  10. Application of the microbiological method DEFT/APC to detect minimally processed vegetables treated with gamma radiation

    NASA Astrophysics Data System (ADS)

    Araújo, M. M.; Duarte, R. C.; Silva, P. V.; Marchioni, E.; Villavicencio, A. L. C. H.

    2009-07-01

    Marketing of minimally processed vegetables (MPV) are gaining impetus due to its convenience, freshness and apparent health effect. However, minimal processing does not reduce pathogenic microorganisms to safe levels. Food irradiation is used to extend the shelf life and to inactivate food-borne pathogens. In combination with minimal processing it could improve safety and quality of MPV. A microbiological screening method based on the use of direct epifluorescent filter technique (DEFT) and aerobic plate count (APC) has been established for the detection of irradiated foodstuffs. The aim of this study was to evaluate the applicability of this technique in detecting MPV irradiation. Samples from retail markets were irradiated with 0.5 and 1.0 kGy using a 60Co facility. In general, with a dose increment, DEFT counts remained similar independent of the irradiation while APC counts decreased gradually. The difference of the two counts gradually increased with dose increment in all samples. It could be suggested that a DEFT/APC difference over 2.0 log would be a criteria to judge if a MPV was treated by irradiation. The DEFT/APC method could be used satisfactorily as a screening method for indicating irradiation processing.

  11. Microbiological Tests Performed During the Design of the International Space Station Environmental Control and Life Support Systems. Part 1, Bulk Phase. Part 1; Bulk Phase

    NASA Technical Reports Server (NTRS)

    Roman, Monsi C.; Mittelman, Marc W.

    2010-01-01

    The design and manufacturing of the main Environmental Control and Life Support Systems (ECLSS) for the United States segments of the International Space Station (ISS) was an involved process that started in the mid 1980s, with the assessment and testing of competing technologies that could be used to clean the air and recycle water. It culminated in 2009 with the delivery and successful activation of the Water Recovery System (WRS) water processor (WP). The ECLSS required the work of a team of engineers and scientist working together to develop systems that could clean and/or recycle human metabolic loads to maintain a clean atmosphere and provide the crew clean water. One of the main goals of the ECLSS is to minimize the time spent by the crew worrying about vital resources not available in the vacuum of space, which allows them to spend most of their time learning to live in a microgravity environment many miles from the comforts of Earth and working on science experiments. Microorganisms are a significant part of the human body as well as part of the environment that we live in. Therefore, the ISS ECLSS design had to take into account the effect microorganisms have on the quality of stored water and wastewater, as well as that of the air systems. Hardware performance issues impacted by the accumulation of biofilm and/or microbiologically influenced corrosion were also studied during the ECLSS development stages. Many of the tests that were performed had to take into account the unique aspects of a microgravity environment as well as the challenge of understanding how to design systems that could not be sterilized or maintained in a sterile state. This paper will summarize the work of several studies that were performed to assess the impacts and/or to minimize the effects of microorganisms in open, semi-closed and closed loop life support system. The biofilm and biodeterioration studies that were performed during the design and test periods will be presented in

  12. Industrial Microbiology.

    ERIC Educational Resources Information Center

    Demain, Arnold L.; Solomon, Nadine A.

    1981-01-01

    Presents an overview of the field of industrial microbiology, providing historical backgrounds of scientific discoveries in the field and descriptions of industrially important microorganisms. Applied research in industry is also detailed, with mention of gene amplification, DNA recombination, pharmaceutical approaches, and detoxification and…

  13. Coral microbiology

    USGS Publications Warehouse

    Rosenberg, Eugene; Kellogg, Christina A.; Rohwer, Forest

    2007-01-01

    In the last 30 years, there has been approximately a 30% loss of corals worldwide, largely due to emerging diseases (Harvell et al., 2002, 2007; Hughes et al., 2003). Coral microbiology is a new field, driven largely by a desire to understand the interactions between corals and their symbiotic microorganisms and to use this knowledge to eventually prevent the spread of coral diseases.

  14. Microbiological safety of Minas Frescal Cheese (MFC) and tracking the contamination of Escherichia coli and Staphylococcus aureus in MFC processing.

    PubMed

    Freitas, Rosangela; Brito, Maria Aparecida Vasconcelos Paiva; Nero, Luís Augusto; de Carvalho, Antonio Fernandes

    2013-11-01

    Minas Frescal cheese (MFC) is a traditional food produced and consumed in Brazil, characterized by its soft texture, low sodium, and high moisture content. This study characterized the microbiological contamination by coliforms, Escherichia coli and Staphylococcus aureus, in 99 MFC samples obtained in retail sale and produced by three distinct industrial procedures. Dairy processors were selected to investigate the key points of E. coli and S. aureus contamination during cheese processing. MFC samples produced by the addition of lactic culture presented higher counts of coliforms and E. coli, when compared to other samples (p<0.05). MFC samples produced by the addition of rennet alone presented higher counts of S. aureus when compared to other samples (p<0.05). Fourteen of 19 MFC samples produced by the addition of lactic culture presented E. coli counts higher than 5 × 10(2) colon-forming units/g. The processing steps after pasteurization were identified as the main sources of E. coli and S. aureus contamination of MFC. Based on the results, MFC was characterized as a potential hazard for consumers due to the high frequency of samples contaminated with E. coli and S. aureus counts in noncompliance with Brazilian standards for sanitary quality and safety.

  15. Importance of good manufacturing practices in microbiological monitoring in processing human tissues for transplant.

    PubMed

    Pianigiani, Elisa; Ierardi, Francesca; Fimiani, Michele

    2013-12-01

    Skin allografts represent an important therapeutic resource in the treatment of severe skin loss. The risk associated with application of processed tissues in humans is very low, however, human material always carries the risk of disease transmission. To minimise the risk of contamination of grafts, processing is carried out in clean rooms where air quality is monitored. Procedures and quality control tests are performed to standardise the production process and to guarantee the final product for human use. Since we only validate and distribute aseptic tissues, we conducted a study to determine what type of quality controls for skin processing are the most suitable for detecting processing errors and intercurrent contamination, and for faithfully mapping the process without unduly increasing production costs. Two different methods for quality control were statistically compared using the Fisher exact test. On the basis of the current study we selected our quality control procedure based on pre- and post-processing tissue controls, operator and environmental controls. Evaluation of the predictability of our control methods showed that tissue control was the most reliable method of revealing microbial contamination of grafts. We obtained 100 % sensitivity by doubling tissue controls, while maintaining high specificity (77 %). PMID:23271587

  16. A Proposal submitted to Biological Systems Science Division of DOE requesting Participant Support Costs for the Fifth International Conference on Polar and Alpine Microbiology

    SciTech Connect

    Priscu, John

    2012-11-20

    The 5th International Conference on Polar and Alpine Microbiology (PAM5) was held in Big Sky, Montana (USA) from 8-12 September 2013. This meeting is a continuation of the highly successful meetings previously held in Rovaniemi, Finland (2004), Innsbruck, Austria (2006), Banff, Canada (2008) and Ljubljana, Slovenia (2011), which brought together leading international researchers and students in this field. The objectives of the Big Sky meeting were to bring together scientists, students and professionals to discuss all aspects of cold-adapted microorganisms and the roles they play in polar and alpine environments, to understand the role of these organisms in our search for life on other icy worlds, to address recent developments, and to exchange ideas and experiences on an international scale. The conference provided a multi-disciplinary forum to explore emerging areas in the field and as always, will have a wealth of opportunities for the exchange of ideas and building of collaborations. Funds were requested to help defray registration fees and travel costs of 13 early career scientists. Distribution of the funds were based on the quality of the abstracts submitted.

  17. Effect of soaking in noni (Morinda citrifolia) juice on the microbiological and color behavior of Haden minimally processed mango.

    PubMed

    Ulloa, José Armando; González Tapia, Noemí T; Rosas Ulloa, Petra; Ramírez Ramírez, José Carmen; Ulloa Rangel, Blanca E

    2015-05-01

    The purpose of this study was to evaluate the effect of soaking in noni juice on the microbiological and color behavior of minimally processed mango. Two batches of Haden mango cubes were treated by immersion in noni juice for 2.5 or 5.0 min. Each batch was packed in polypropylene boxes and stored at 6 °C for up to 15 days; in addition, a control group of mango cubes was prepared by immersion in sterile water for the same duration. According to the results, the soaking of mango cubes in noni juice had an antimicrobial effect on mesophilic aerobic bacteria, molds and yeasts during storage at 6 °C for 15 days, without significantly (P < 0.05) affecting the CIE L*, a*, b*, chroma and hue angle values, in comparison with the control after 12 days of storage. The noni juice soaking treatment was demonstrated to be a potentially valuable technology for decontamination of fresh-cut fruit surfaces.

  18. Processes of Internal and International Migration from Chitwan, Nepal

    PubMed Central

    Bohra, Pratikshya; Massey, Douglas S.

    2011-01-01

    In this study we examine which factors predict internal and international migration from Chitwan, a flat valley located in the South-Central region of Nepal, seeking to measure the effect of theoretically specified variables such as human capital, social capital, physical capital, and neighborhood socioeconomic conditions while controlling for demographic variables. We use data from the Chitwan Valley Family Study (CVFS) to estimate a series of discrete time event history models of first and repeat migration to three competing destinations: other locations within Chitwan, other districts within Nepal, and places outside of Nepal. Results support hypotheses derived from neoclassical economics, the theory of new economics of migration, social capital theory, and cumulative causation theory. Our results underscore the need for a synthetic theoretical model that incorporates factors operating at the individual, household, and community levels. The use of multiple explanatory models yields a clearer picture of the forces driving internal and international migration from rural districts in developing nations such as Nepal. PMID:21423821

  19. Internal Heterogeneous Processes in Aluminum Combustion

    NASA Technical Reports Server (NTRS)

    Dreizin, E. L.

    1999-01-01

    This paper discusses the aluminum particle combustion mechanism which has been expanded by inclusion of gas dissolution processes and ensuing internal phase transformations. This mechanism is proposed based on recent normal and microgravity experiments with particles formed and ignited in a pulsed micro-arc. Recent experimental findings on the three stages observed in Al particle combustion in air and shows the burning particle radiation, trajectory (streak), smoke cloud shapes, and quenched particle interiors are summarized. During stage I, the radiation trace is smooth and the particle flame is spherically symmetric. The temperature measured using a three-color pyrometer is close to 3000 K. Because it exceeds the aluminum boiling point (2730 K), this temperature most likely characterizes the vapor phase flame zone rather than the aluminum surface. The dissolved oxygen content within particles quenched during stage I was below the detection sensitivity (about 1 atomic %) for Wavelength Dispersive Spectroscopy (WDS). After an increase in the radiation intensity (and simultaneous decrease in the measured color temperature from about 3000 to 2800 K) indicative of the transition to stage II combustion, the internal compositions of the quenched particles change. Both oxygen-rich (approx. 10 atomic %) and oxygen-lean (< 1 %) regions are identified within the particles using back-scattered electron imaging and WDS. During stage II, oscillations are observed in particle radiation and the flame and smoke cloud are distorted from their original spherically-symmetric shape. In stage III, particle radiation continues to exhibit oscillations, but its radiation intensity drops and remains at a nearly constant level. The measured temperature decreases to about 2300 K. Also, larger changes in particle velocities are observed, and oxide caps are found on quenched particle surfaces. While these results showed the correlation between the aluminum particle combustion behavior and the

  20. Combination of minimal processing and irradiation to improve the microbiological safety of lettuce ( Lactuca sativa, L.)

    NASA Astrophysics Data System (ADS)

    Goularte, L.; Martins, C. G.; Morales-Aizpurúa, I. C.; Destro, M. T.; Franco, B. D. G. M.; Vizeu, D. M.; Hutzler, B. W.; Landgraf, M.

    2004-09-01

    The feasibility of gamma radiation in combination with minimal processing (MP) to reduce the number of Salmonella spp. and Escherichia coli O157:H7 in iceberg lettuce ( Lactuca sativa, L.) (shredded) was studied in order to increase the safety of the product. The reduction of the microbial population during the processing, the D10-values for Salmonella spp. and E. coli O157:H7 inoculated on shredded iceberg lettuce as well as the sensory evaluation of the irradiated product were evaluated. The immersion in chlorine (200 ppm) reduced coliform and aerobic mesophilic microorganisms by 0.9 and 2.7 log, respectively. D-values varied from 0.16 to 0.23 kGy for Salmonella spp. and from 0.11 to 0.12 kGy for E. coli O157:H7. Minimally processed iceberg lettuce exposed to 0.9 kGy does not show any change in sensory attributes. However, the texture of the vegetable was affected during the exposition to 1.1 kGy. The exposition of MP iceberg lettuce to 0.7 kGy reduced the population of Salmonella spp. by 4.0 log and E. coli by 6.8 log without impairing the sensory attributes. The combination of minimal process and gamma radiation to improve the safety of iceberg lettuce is feasible if good hygiene practices begins at farm stage.

  1. Microbiology and atmospheric processes: an upcoming era of research on bio-meteorology

    NASA Astrophysics Data System (ADS)

    Morris, C. E.; Sands, D. C.; Bardin, M.; Jaenicke, R.; Vogel, B.; Leyronas, C.; Ariya, P. A.; Psenner, R.

    2008-01-01

    For the past 200 years, the field of aerobiology has explored the abundance, diversity, survival and transport of micro-organisms in the atmosphere. Micro-organisms have been explored as passive and severely stressed riders of atmospheric transport systems. Recently, an interest in the active roles of these micro-organisms has emerged along with proposals that the atmosphere is a global biome for microbial metabolic activity and perhaps even multiplication. As part of a series of papers on the sources, distribution and roles in atmospheric processes of biological particles in the atmosphere, here we describe the pertinence of questions relating to the potential roles that air-borne micro-organisms might play in meteorological phenomena. For the upcoming era of research on the role of air-borne micro-organisms in meteorological phenomena, one important challenge is to go beyond descriptions of abundance of micro-organisms in the atmosphere toward an understanding of their dynamics in terms of both biological and physico-chemical properties and of the relevant transport processes at different scales. Another challenge is to develop this understanding under contexts pertinent to their potential role in processes related to atmospheric chemistry, the formation of clouds, precipitation and radiative forcing. This will require truly interdisciplinary approaches involving collaborators from the biological and physical sciences, from disciplines as disparate as agronomy, microbial genetics and atmosphere physics, for example.

  2. [Proposal for microbiological criteria for the control of cheese spreads].

    PubMed

    Mercado, E C; Rivas, M

    1986-01-01

    Eighteen lots of processed cheese and processed cheese spread were analyzed. Results obtained for the yeasts and molds count (RHL) and the total coliforms count (RCT) were 88.9% inferior to 100 per gram, in the 90 subsamples studied. The fecal coliforms count (RCF) and the S. aureus count were, respectively, 96.6% and 94.4% inferior to 10 per gram, for the same subsamples. Taking into account the format presented by the International Commission on Microbiological Specifications for Foods and the results of our survey, a three class plan is proposed for the following microbiological tests: RHL (n = 5, c = 2, m = 100, M = 1000); RCT (n = 5, c = 2, m = 100, M = 1000); RCF (n = 5, c = 2, m = 10, M = 100); and S. aureus count (n = 5, c = 1, m = 100, M = 1000). Therefore, applying these microbiological specifications, 4 lots (22.2%) would be rejected.

  3. 8 CFR 287.10 - Expedited internal review process.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... to employees of the former INS, persons may contact the Office of Internal Audit, Bureau of... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Expedited internal review process. 287.10... OFFICERS; POWERS AND DUTIES § 287.10 Expedited internal review process. (a) Violations of standards...

  4. Microbiological quality of chicken wings damaged on the farm or in the processing plant.

    PubMed

    Malpass, M C; Williams, A P; Jones, D L; Omed, H M

    2010-06-01

    Selling of damaged chicken wings (those with bone protrusion) for human consumption is prohibited in the European Union on the grounds of possible risks to human health arising from microbial contamination. Standard food industry tests were used to assess different categories of chicken wings (undamaged, farm damaged and factory damaged; n = 264) for, coliforms, Enterobacteriaceae, total viable counts, Pseudomonas spp., Staphylococcus aureus and Salmonella spp. No significant differences in bacterial numbers existed among wings belonging to the three categories. Only low numbers of bacteria were found throughout, and 97% of all results would pass the standards of a leading UK retailer. These results were strengthened by a longitudinal survey of wing breakage, which showed almost all wing puncturing occurred during the de-feathering process, limiting the likelihood of microbial contamination. Combined, these results indicate there is no increased health risk from consumption of damaged, compared to undamaged, chicken wings. The existing imposed regulations may therefore be an unnecessary burden on the poultry industry. PMID:20417402

  5. Forensic microbiology.

    PubMed

    Lehman, Donald C

    2012-01-01

    The field of forensic microbiology is fairly new and still evolving. With a threat of bioterror and biocrime, the rapid identification and subtyping of infectious agents is of upmost importance. Microbial genetic analysis is a valuable tool in this arena. The cost to sequence a microbial genome has fallen dramatically in recent years making this method more widely available. Surveillance and vigilance are important as is further research. The United States Department of Homeland Security established the Bioforensics Analysis Center to become the foremost U.S. biodefense research institution involved with bioforensics. Many countries are better prepared for biologic events than ever before, but more work is needed. Most medical laboratory scientists are not familiar with forensic principles or testifying in court. Demonstrating chain of custody and quality assurance are critical so that test results will be admissible in a court of law. The Scientific Working Group on Microbial Genetics and Forensics has published guidelines for forensic microbiology laboratories. Incorporating these guidelines help to provide test results that are useful in legal proceedings. If a laboratory scientist suspects bioterror or biocrime, or other legal case, law enforcement agents must be notified and diagnostic samples preserved. Additional sample testing might be necessary in court cases.

  6. Flow-cytometric total bacterial cell counts as a descriptive microbiological parameter for drinking water treatment processes.

    PubMed

    Hammes, Frederik; Berney, Michael; Wang, Yingying; Vital, Marius; Köster, Oliver; Egli, Thomas

    2008-01-01

    There are significantly more microbial cells in drinking water than what can be cultured on synthetic growth media. Nonetheless, cultivation-based heterotrophic plate counts (HPCs) are used worldwide as a general microbial quality parameter in drinking water treatment and distribution. Total bacterial cell concentrations are normally not considered during drinking water treatment as a design, operative or legislative parameters. This is mainly because easy and rapid methods for quantification of total bacterial cell concentrations have, up to now, not been available. As a consequence, the existing lack of data does not allow demonstrating the practical value of this parameter. In this study, we have used fluorescence staining of microbial cells with the nucleic acid stain SYBR((R)) Green I together with quantitative flow cytometry (FCM) to analyse total cell concentrations in water samples from a drinking water pilot plant. The plant treats surface water (Lake Zürich) through sequential ozonation, granular active carbon (GAC) filtration and membrane ultrafiltration (UF). The data were compared with adenosine tri-phosphate (ATP) measurements and conventional HPCs performed on the same water samples. We demonstrated that the impact of all three major treatment steps on the microbiology in the system could accurately be described with total cell counting: (1) ozonation caused chemical destruction of the bacterial cells; (2) GAC filtration facilitated significant regrowth of the microbial community; and (3) membrane UF physically removed the bacterial cells from the water. FCM typically detected 1-2 log units more than HPC, while ATP measurements were prone to interference from extracellular ATP released during the ozonation step in the treatment train. We have shown that total cell concentration measured with FCM is a rapid, easy, sensitive and importantly, a descriptive parameter of several widely applied drinking water treatment processes.

  7. Microbiological risk assessment in developing countries.

    PubMed

    Cahill, Sarah M; Jouve, Jean-Louis R

    2004-09-01

    Microbiological risk assessment (MRA) has been evolving at the national and international levels as a systematic and objective approach for evaluating information pertaining to microbiological hazards in foods and the risks they pose. This process has been catalyzed by international food trade requirements to base sanitary measures on sound scientific evidence and appropriate risk assessments. All countries, including developing countries, need to understand and use MRA. MRA is resource intensive, as has been demonstrated by some of the the assessments undertaken in industrialized countries. However, when used in the appropriate circumstances MRA offers many benefits. The process of undertaking MRA improves the understanding of key issues, enables an objective evaluation of risk management options, and provides a scientific justification for actions. Although the gap between developing countries and some industrialized countries is quite extensive with regard to MRA, many developing countries recognize the need to at least understand and move toward using MRA. This process requires development of infrastructure and enhancement of scientific and technical expertise while making optimal use of limited resources. International organizations, such as the Food and Agriculture Organization of the United Nations, are in a position to provide countries with guidance, training, information resources, and technical assistance to develop and/or strengthen food safety infrastructure. Enhanced cooperation and collaboration at all levels are needed for such efforts to be successful and to ensure that MRA, as a food safety tool, is available to all countries. PMID:15453597

  8. Validation of a novel rinse and filtration method for efficient processing of fresh produce samples for microbiological indicator enumeration.

    PubMed

    Heredia, Norma; Solís-Soto, Luisa; Venegas, Fabiola; Bartz, Faith E; de Aceituno, Anna Fabiszewski; Jaykus, Lee-Ann; Leon, Juan S; García, Santos

    2015-03-01

    Several methods have been described to prepare fresh produce samples for microbiological analysis, each with its own advantages and disadvantages. The aim of this study was to compare the performance of a novel combined rinse and membrane filtration method to two alternative sample preparation methods for the quantification of indicator microorganisms from fresh produce. Decontaminated cantaloupe melons and jalapeño peppers were surface inoculated with a cocktail containing 10(6) CFU/ml Escherichia coli, Salmonella Typhimurium, and Enterococcus faecalis. Samples were processed using a rinse and filtration method, homogenization by stomacher, or a sponge-rubbing method, followed by quantification of bacterial load using culture methods. Recovery efficiencies of the three methods were compared. On inoculated cantaloupes, the rinse and filtration method had higher recovery of coliforms (0.95 log CFU/ml higher recovery, P = 0.0193) than the sponge-rubbing method. Similarly, on inoculated jalapeños, the rinse and filtration method had higher recovery for coliforms (0.84 log CFU/ml higher, P = 0.0130) and E. coli (1.46 log CFU/ml higher, P < 0.0001) than the sponge-rubbing method. For jalapeños, the rinse and filtration method outperformed the homogenization method for all three indicators (0.79 to 1.71 log CFU/ml higher, P values ranging from 0.0075 to 0.0002). The precision of the three methods was also compared. The precision of the rinse and filtration method was similar to that of the other methods for recovery of two of three indicators from cantaloupe (E. coli P = 0.7685, E. faecalis P = 0.1545) and was more precise for recovery of two of three indicators from jalapeño (coliforms P = 0.0026, E. coli P = 0.0243). Overall, the rinse and filtration method performed equivalent to, and sometimes better than, either of the compared methods. The rinse and filtration method may have logistical advantages when processing large numbers of samples, improving sampling

  9. The Influence of Microbiology on Spacecraft Design and Controls: A Historical Perspective of the Shuttle and International Space Station Programs

    NASA Technical Reports Server (NTRS)

    Castro, Victoria A.; Bruce, Rebekah J.; Ott, C. Mark; Pierson, D. L.

    2006-01-01

    For over 40 years, NASA has been putting humans safely into space in part by minimizing microbial risks to crew members. Success of the program to minimize such risks has resulted from a combination of engineering and design controls as well as active monitoring of the crew, food, water, hardware, and spacecraft interior. The evolution of engineering and design controls is exemplified by the implementation of HEPA filters for air treatment, antimicrobial surface materials, and the disinfection regimen currently used on board the International Space Station. Data from spaceflight missions confirm the effectiveness of current measures; however, fluctuations in microbial concentrations and trends in contamination events suggest the need for continued diligence in monitoring and evaluation as well as further improvements in engineering systems. The knowledge of microbial controls and monitoring from assessments of past missions will be critical in driving the design of future spacecraft.

  10. [Quality control in molecular microbiology].

    PubMed

    Orta Mira, Nieves; Guna Serrano, María Remedio; Gimeno Cardona, Concepción; Pérez, José L

    2008-07-01

    The term quality assurance (QA) refers to the quality control activities related to analytical procedures performed in the clinical microbiology laboratory. QA should include both external and internal quality assessment. Application of quality control tools in molecular microbiology assays is crucial to ensure the accuracy of results and appropriate patient management. External quality control is used for laboratory intercomparisons, detection of random and systematic errors, evaluation of the suitability of some reagents or commercial diagnostic kits, and continuing education. The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology includes quality control procedures for molecular microbiology, as well as specific programs for quantitative determination of the viral load of human immunodeficiency virus type 1 (HIV-1) and hepatitis C virus (HCV), two highly important molecular markers in clinical settings due to their prognostic value and utility as a treatment guide. Internal quality control allows random and systematic errors to be detected through the inclusion of quality control samples in the assays performed in the laboratory, equipment monitoring, and audit. Evaluation of all molecular microbiology assays before their inclusion in the daily routine work of the laboratory is of utmost importance.

  11. International Student Mobility and the Bologna Process

    ERIC Educational Resources Information Center

    Teichler, Ulrich

    2012-01-01

    The Bologna Process is the newest of a chain of activities stimulated by supra-national actors since the 1950s to challenge national borders in higher education in Europe. Now, the ministers in charge of higher education of the individual European countries have agreed to promote a similar cycle-structure of study programmes and programmes based…

  12. CM Process Improvement and the International Space Station Program (ISSP)

    NASA Technical Reports Server (NTRS)

    Stephenson, Ginny

    2007-01-01

    This viewgraph presentation reviews the Configuration Management (CM) process improvements planned and undertaken for the International Space Station Program (ISSP). It reviews the 2004 findings and recommendations and the progress towards their implementation.

  13. A Structured Debriefing Process for International Business Culture Simulations.

    ERIC Educational Resources Information Center

    McGraw, Peter; Palmer, Ian

    1999-01-01

    Outlines a nine-step structure for debriefing an international business culture simulation. Stresses the need to address three stages in the experiential learning cycle: reflection, processing, and transfer. Appendices include the specific simulation used and a debriefing note. (DB)

  14. Aquatic Microbiology Laboratory Manual.

    ERIC Educational Resources Information Center

    Cooper, Robert C.; And Others

    This laboratory manual presents information and techniques dealing with aquatic microbiology as it relates to environmental health science, sanitary engineering, and environmental microbiology. The contents are divided into three categories: (1) ecological and physiological considerations; (2) public health aspects; and (3)microbiology of water…

  15. Effect of High Hydrostatic Pressure Processing on Microbiological Shelf-Life and Quality of Fruits Pretreated with Ascorbic Acid or SnCl2

    PubMed Central

    Argyri, Anthoula A.; Tassou, Chrysoula C.; Samaras, Fotios; Mallidis, Constantinos

    2014-01-01

    In the current study, the processing conditions required for the inactivation of Paenibacillus polymyxa and relevant spoilage microorganisms by high hydrostatic pressure (HHP) treatment on apricot, peach, and pear pieces in sucrose (22°Brix) solution were assessed. Accordingly, the shelf-life was determined by evaluating both the microbiological quality and the sensory characteristics (taste, odor, color, and texture) during refrigerated storage after HHP treatment. The microbiological shelf-life of apricots, peaches, and pears was prolonged in the HHP-treated products in comparison with the untreated ones. In all HHP-treated packages for apricots, peaches, and pears, all populations were below the detection limit of the method (1 log CFU/g) and no growth of microorganisms was observed until the end of storage. Overall, no differences of the L*, a*, or b* value among the untreated and the HHP-treated fruit products were observed up to the time at which the unpressurized product was characterized as spoiled. HHP treatment had no remarkable effect on the firmness of the apricots, peaches, and pears. With regard to the sensory assessment, the panelists marked better scores to HHP-treated products compared to their respective controls, according to taste and total evaluation during storage of fruit products. PMID:25295275

  16. International Heart Valve Bank Survey: A Review of Processing Practices and Activity Outcomes

    PubMed Central

    Albrecht, Helmi; Lim, Yeong Phang; Manning, Linda

    2013-01-01

    A survey of 24 international heart valve banks was conducted to acquire information on heart valve processing techniques used and outcomes achieved. The objective was to provide an overview of heart valve banking activities for tissue bankers, tissue banking associations, and regulatory bodies worldwide. Despite similarities found for basic manufacturing processes, distinct differences in procedural details were also identified. The similarities included (1) use of sterile culture media for procedures, (2) antibiotic decontamination, (3) use of dimethyl sulfoxide (DMSO) as a cryoprotectant, (4) controlled rate freezing for cryopreservation, and (5) storage at ultralow temperatures of below −135°C. Differences in procedures included (1) type of sterile media used, (2) antibiotics combination, (3) temperature and duration used for bioburden reduction, (4) concentration of DMSO used for cryopreservation, and (5) storage duration for released allografts. For most banks, the primary reasons why allografts failed to meet release criteria were positive microbiological culture and abnormal morphology. On average, 85% of allografts meeting release criteria were implanted, with valve size and type being the main reasons why released allografts were not used clinically. The wide variation in percentage of allografts meeting release requirements, despite undergoing validated manufacturing procedures, justifies the need for regular review of important outcomes as cited in this paper, in order to encourage comparison and improvements in the HVBs' processes. PMID:24163756

  17. Microbiological hazard analysis of ready-to-eat meats processed at a food plant in Trinidad, West Indies

    PubMed Central

    Syne, Stacey-Marie; Ramsubhag, Adash; Adesiyun, Abiodun A.

    2013-01-01

    Background A bacteriological assessment of the environment and food products at different stages of processing was conducted during the manufacture of ready-to-eat (RTE) chicken franks, chicken bologna and bacon at a large meat processing plant in Trinidad, West Indies. Methods Samples of air, surfaces (swabs), raw materials, and in-process and finished food products were collected during two separate visits for each product type and subjected to qualitative or quantitative analysis for bacterial zoonotic pathogens and fecal indicator organisms. Results Staphylococcus aureus was the most common pathogen detected in pre-cooked products (mean counts = 0.66, 1.98, and 1.95 log10CFU/g for franks, bologna, and bacon, respectively). This pathogen was also found in unacceptable levels in 4 (16.7%) of 24 post-cooked samples. Fifty percent (10 of 20) of pre-cooked mixtures of bacon and bologna were contaminated with Listeria spp., including four with L. monocytogenes. Pre-cooked mixtures of franks and bologna also contained E. coli (35 and 0.72 log10 CFU/g, respectively) while 5 (12.5%) of 40 pre-cooked mixtures of chicken franks had Salmonella spp. Aerobic bacteria exceeded acceptable international standards in 46 (82.1%) of 56 pre-cooked and 6 (16.7%) of 36 post-cooked samples. Both pre-and post-cooking air and surfaces had relatively high levels of aerobic bacteria, Staphylococcus aureus and coliforms, including equipment and gloves of employees. A drastic decrease in aerobic counts and Staphylococcus aureus levels following heat treatment and subsequent increase in counts of these bacteria are suggestive of post-cooking contamination. Conclusion A relatively high level of risk exists for microbial contamination of RTE meats at the food plant investigated and there is a need for enhancing the quality assurance programs to ensure the safety of consumers of products manufactured at this plant. PMID:23878681

  18. Process monitoring in international safeguards for reprocessing plants: A demonstration

    SciTech Connect

    Ehinger, M.H.

    1989-01-01

    In the period 1985--1987, the Oak Ridge National Laboratory investigated the possible role of process monitoring for international safeguards applications in fuel reprocessing plants. This activity was conducted under Task C.59, ''Review of Process Monitoring Safeguards Technology for Reprocessing Facilities'' of the US program of Technical Assistance to the International Atomic Energy Agency (IAEA) Safeguards program. The final phase was a demonstration of process monitoring applied in a prototypical reprocessing plant test facility at ORNL. This report documents the demonstration and test results. 35 figs.

  19. Microbiology facilities aboard Space Station Freedom (SSF)

    NASA Technical Reports Server (NTRS)

    Cioletti, L. A.; Mishra, S. K.; Richard, Elizabeth E.; Taylor, R.

    1990-01-01

    A comprehensive microbiological facility is being designed for use on board Space Station Freedom (SSF). Its purpose will be to conduct microbial surveillance of the SSF environment and to examine clinical specimens. Air, water, and internal surfaces will be periodically monitored to satisfy requirements for a safe environment. Crew health will remain a principle objective for every mission. This paper will review the Microbiology Subsystem capabilities planned for SSF application.

  20. 47 CFR 73.3574 - Processing of international broadcast station applications.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Processing of international broadcast station... of international broadcast station applications. (a) Applications for International station... such amended application. (c) Applications for International stations will be processed as nearly...

  1. Quantum microbiology.

    PubMed

    Trevors, J T; Masson, L

    2011-01-01

    During his famous 1943 lecture series at Trinity College Dublin, the reknown physicist Erwin Schrodinger discussed the failure and challenges of interpreting life by classical physics alone and that a new approach, rooted in Quantum principles, must be involved. Quantum events are simply a level of organization below the molecular level. This includes the atomic and subatomic makeup of matter in microbial metabolism and structures, as well as the organic, genetic information code of DNA and RNA. Quantum events at this time do not elucidate, for example, how specific genetic instructions were first encoded in an organic genetic code in microbial cells capable of growth and division, and its subsequent evolution over 3.6 to 4 billion years. However, due to recent technological advances, biologists and physicists are starting to demonstrate linkages between various quantum principles like quantum tunneling, entanglement and coherence in biological processes illustrating that nature has exerted some level quantum control to optimize various processes in living organisms. In this article we explore the role of quantum events in microbial processes and endeavor to show that after nearly 67 years, Schrödinger was prophetic and visionary in his view of quantum theory and its connection with some of the fundamental mechanisms of life. PMID:21368338

  2. Rapid methods and automation in dairy microbiology.

    PubMed

    Vasavada, P C

    1993-10-01

    The importance of microbiology to the dairy industry has been demonstrated by recent outbreaks of foodborne illness associated with consumption of milk and dairy products that had been contaminated with pathogenic organisms or toxins. Undesirable microorganisms constitute the primary hazard to safety, quality, and wholesomeness of milk and dairy foods. Consequently, increased emphasis has been placed on the microbiological analysis of milk and dairy products designed to evaluate quality and to ensure safety and regulatory compliance. The focus of dairy microbiology, however, remains largely on conventional methods: plate counts, most probable numbers, and dye reduction tests. These methods are slow, tedious, intensive in their requirements for material and labor, and often not suitable for assessing the quality and shelf-life of perishable dairy foods. With the exception of coliforms, Salmonella, and Staphylococcus aureus, isolation and characterization of various organisms occurring in milk and milk products are seldom a part of the routine microbiological analysis in the dairy industry. Recent emphasis on the programs based on HACCP (Hazard Analysis and Critical Control Points) for total quality management in the dairy industry and increased demand for microbiological surveillance of products, process, and environment have led to increased interest in rapid methods and automation in microbiology. Several methods for rapid detection, isolation, enumeration, and characterization of microorganisms are being adapted by the dairy industry. This presentation reviews rapid methods and automation in microbiology for microbiological analysis of milk and dairy products.

  3. Space Microbiology

    PubMed Central

    Horneck, Gerda; Klaus, David M.; Mancinelli, Rocco L.

    2010-01-01

    Summary: The responses of microorganisms (viruses, bacterial cells, bacterial and fungal spores, and lichens) to selected factors of space (microgravity, galactic cosmic radiation, solar UV radiation, and space vacuum) were determined in space and laboratory simulation experiments. In general, microorganisms tend to thrive in the space flight environment in terms of enhanced growth parameters and a demonstrated ability to proliferate in the presence of normally inhibitory levels of antibiotics. The mechanisms responsible for the observed biological responses, however, are not yet fully understood. A hypothesized interaction of microgravity with radiation-induced DNA repair processes was experimentally refuted. The survival of microorganisms in outer space was investigated to tackle questions on the upper boundary of the biosphere and on the likelihood of interplanetary transport of microorganisms. It was found that extraterrestrial solar UV radiation was the most deleterious factor of space. Among all organisms tested, only lichens (Rhizocarpon geographicum and Xanthoria elegans) maintained full viability after 2 weeks in outer space, whereas all other test systems were inactivated by orders of magnitude. Using optical filters and spores of Bacillus subtilis as a biological UV dosimeter, it was found that the current ozone layer reduces the biological effectiveness of solar UV by 3 orders of magnitude. If shielded against solar UV, spores of B. subtilis were capable of surviving in space for up to 6 years, especially if embedded in clay or meteorite powder (artificial meteorites). The data support the likelihood of interplanetary transfer of microorganisms within meteorites, the so-called lithopanspermia hypothesis. PMID:20197502

  4. Space microbiology.

    PubMed

    Horneck, Gerda; Klaus, David M; Mancinelli, Rocco L

    2010-03-01

    The responses of microorganisms (viruses, bacterial cells, bacterial and fungal spores, and lichens) to selected factors of space (microgravity, galactic cosmic radiation, solar UV radiation, and space vacuum) were determined in space and laboratory simulation experiments. In general, microorganisms tend to thrive in the space flight environment in terms of enhanced growth parameters and a demonstrated ability to proliferate in the presence of normally inhibitory levels of antibiotics. The mechanisms responsible for the observed biological responses, however, are not yet fully understood. A hypothesized interaction of microgravity with radiation-induced DNA repair processes was experimentally refuted. The survival of microorganisms in outer space was investigated to tackle questions on the upper boundary of the biosphere and on the likelihood of interplanetary transport of microorganisms. It was found that extraterrestrial solar UV radiation was the most deleterious factor of space. Among all organisms tested, only lichens (Rhizocarpon geographicum and Xanthoria elegans) maintained full viability after 2 weeks in outer space, whereas all other test systems were inactivated by orders of magnitude. Using optical filters and spores of Bacillus subtilis as a biological UV dosimeter, it was found that the current ozone layer reduces the biological effectiveness of solar UV by 3 orders of magnitude. If shielded against solar UV, spores of B. subtilis were capable of surviving in space for up to 6 years, especially if embedded in clay or meteorite powder (artificial meteorites). The data support the likelihood of interplanetary transfer of microorganisms within meteorites, the so-called lithopanspermia hypothesis.

  5. Learners' Internal Management of Cognitive Processing in Online Learning

    ERIC Educational Resources Information Center

    Chen, C.-Y.; Pedersen, S.

    2012-01-01

    This study examined students' internal management of their cognitive processing in an interactive online class. A mixed methods approach was used to explore students' strategy use in online discussions. The focus is on examining individual knowledge construction through active cognitive engagement, rather than the social interactions, in the…

  6. Sensory Processing in Internationally Adopted, Post-Institutionalized Children

    ERIC Educational Resources Information Center

    Wilbarger, Julia; Gunnar, Megan; Schneider, Mary; Pollak, Seth

    2010-01-01

    Background/Methods: Sensory processing capacities of 8-12-year-old internationally adopted (IA) children who experienced prolonged institutional care (greater than 12 months with 75% of pre-adoption lives in institutional care) prior to adoption into family environments (PI) were compared to a group of IA children who were adopted early (less than…

  7. Microbiology & Toxicology: Space Environment

    NASA Video Gallery

    One key aspect in maintaining crew health and performance during spaceflight missions is the provision of a habitable environment with acceptably low concentrations of microbiological and toxicolog...

  8. International Patients’ Travel Decision Making Process- A Conceptual Framework

    PubMed Central

    KHAN, Mohammad Jamal; CHELLIAH, Shankar; HARON, Mahmod Sabri

    2016-01-01

    Background: Role of information source, perceived benefits and risks, and destination image has significantly been examined in travel and tourism literature; however, in medical tourism it is yet to be examined thoroughly. The concept discussed in this article is drawn form well established models in tourism literature. Methods: The purpose of this research was to identify the source of information, travel benefits and perceived risks related to movement of international patients and develop a conceptual model based on well-established theory. Thorough database search (Science Direct, utmj.org, nih.gov, nchu.edu.tw, palgrave-journals, medretreat, Biomedcentral) was performed to fulfill the objectives of the study. Results: International patients always concern about benefits and risks related to travel. These benefits and risks form images of destination in the minds of international patients. Different sources of information make international patients acquaint about the associated benefits and risks, which later leads to development of intention to visit. This conceptual paper helps in establishing model for decision-making process of international patients in developing visit intention. Conclusion: Ample amount of literature is available detailing different factors involved in travel decision making of international patients; however literature explaining relationship between these factors is scarce. PMID:27114978

  9. Microbiology and Human Spaceflight Applications

    NASA Technical Reports Server (NTRS)

    Ott, C. Mark

    2016-01-01

    As humans continue to travel further into space, microorganisms will accompany them. Thus, understanding how microorganisms can impact the crew, the spacecraft, and spacecraft systems is critical to enable future spaceflight exploration. To mitigate microbial risks during spaceflight, NASA relies heavily on preventative measures, including appropriate vehicle design, crew quarantine prior to flight, and extensive microbial monitoring. While these precautions minimize the proliferation of infectious agents, their presence cannot be completely eliminated. Microbiological contamination of vehicle systems can also be a key issue for long duration missions, as system deterioration and fouling have been previously observed in spacecraft. Current studies of the microbiomes of the crew and the International Space Station environment are providing a wealth of information and hold the potential to help refine microbiological requirements for NASA mission beyond low Earth orbit, as spaceflight environments and mission architectures rapidly evolve.

  10. Atomic force microscopy to detect internal live processes in insects

    NASA Astrophysics Data System (ADS)

    Dokukin, M. E.; Guz, N. V.; Vasilyev, S.; Sokolov, I.

    2010-01-01

    Here we report on the use of atomic force microscopy (AFM) to study surface oscillations coming from internal live processes of insects. With a specially designed AFM stage to keep an insect motion partially restricted, the AFM can record internal oscillations on different parts of the insect. We demonstrate the method for a fly, mosquito, and lady beetle. We show that AFM can provide information about the spectral behavior that has not been studied so far, 10-600 Hz range, detecting amplitudes down to subnanometer level.

  11. Automation in the clinical microbiology laboratory.

    PubMed

    Novak, Susan M; Marlowe, Elizabeth M

    2013-09-01

    Imagine a clinical microbiology laboratory where a patient's specimens are placed on a conveyor belt and sent on an automation line for processing and plating. Technologists need only log onto a computer to visualize the images of a culture and send to a mass spectrometer for identification. Once a pathogen is identified, the system knows to send the colony for susceptibility testing. This is the future of the clinical microbiology laboratory. This article outlines the operational and staffing challenges facing clinical microbiology laboratories and the evolution of automation that is shaping the way laboratory medicine will be practiced in the future. PMID:23931839

  12. Automation in the clinical microbiology laboratory.

    PubMed

    Novak, Susan M; Marlowe, Elizabeth M

    2013-09-01

    Imagine a clinical microbiology laboratory where a patient's specimens are placed on a conveyor belt and sent on an automation line for processing and plating. Technologists need only log onto a computer to visualize the images of a culture and send to a mass spectrometer for identification. Once a pathogen is identified, the system knows to send the colony for susceptibility testing. This is the future of the clinical microbiology laboratory. This article outlines the operational and staffing challenges facing clinical microbiology laboratories and the evolution of automation that is shaping the way laboratory medicine will be practiced in the future.

  13. Egg Microbiology Basics

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Microbiology is the study of living microorganisms. This includes any single living animal not visible to the naked eye most of which are less than 0.1 mm in diameter. Bacteria, yeasts, molds, viruses, some algae and protozoans are considered microorganisms. Microbiology is a diverse field and fo...

  14. Microbiology, philosophy and education.

    PubMed

    O'Malley, Maureen A

    2016-09-01

    There are not only many links between microbiological and philosophical topics, but good educational reasons for microbiologists to explore the philosophical issues in their fields. I examine three broad issues of classification, causality and model systems, showing how these philosophical dimensions have practical implications. I conclude with a discussion of the educational benefits for recognising the philosophy in microbiology.

  15. Microbiology of Water.

    ERIC Educational Resources Information Center

    Geldreich, Edwin E.

    1978-01-01

    Presents a literature review of microbiology of water, covering publications of 1967-77. This review covers: (1) microbial indicators of pollution; and (2) microbiology of rivers, potable waters, natural lakes, and impoundments. A list of 192 references is also presented. (HM)

  16. Microbiology of Waste Treatment.

    ERIC Educational Resources Information Center

    Unz, Richard F.

    1978-01-01

    Presents a literature review of the microbiology of waste treatment, covering publications of 1976-77. This review includes topics such as: (1) sanitary microbiology; (2) wastewater disinfectant; (3) viruses in wastewater; and (4) wastewater microbial populations. A list of 142 references is also presented. (HM)

  17. Microbiology, philosophy and education.

    PubMed

    O'Malley, Maureen A

    2016-09-01

    There are not only many links between microbiological and philosophical topics, but good educational reasons for microbiologists to explore the philosophical issues in their fields. I examine three broad issues of classification, causality and model systems, showing how these philosophical dimensions have practical implications. I conclude with a discussion of the educational benefits for recognising the philosophy in microbiology. PMID:27465488

  18. [Environmental microbiological control].

    PubMed

    Martín Salas, Carmen; Tordoya Titichoca, Igberto J; Ezpeleta Baquedano, Carmen

    2016-07-01

    The environmental microbiological control is necessary to prevent infections associated with certain procedures that are performed at the hospital. In this review the procedures for control of water and dialysis fluids, and air in operating rooms and immunocompromised units are addressed. The dialysis quality management guidelines define the highest levels of chemical, microbiological and endotoxin in purified water and dialysis fluids based on the recommendations of scientific societies. The microbiological control of water and dialysis fluids should include detection of microorganisms and endotoxin levels. Regarding the microbiological air sampling of operating rooms and immunocompromised units the types of clean rooms in which is recommended to perform microbiological air monitoring; the sample collection methods; culture media; incubation conditions; the most common microorganisms, and permissible levels depending on the type of surgery are described. PMID:27474243

  19. [Environmental microbiological control].

    PubMed

    Martín Salas, Carmen; Tordoya Titichoca, Igberto J; Ezpeleta Baquedano, Carmen

    2016-07-01

    The environmental microbiological control is necessary to prevent infections associated with certain procedures that are performed at the hospital. In this review the procedures for control of water and dialysis fluids, and air in operating rooms and immunocompromised units are addressed. The dialysis quality management guidelines define the highest levels of chemical, microbiological and endotoxin in purified water and dialysis fluids based on the recommendations of scientific societies. The microbiological control of water and dialysis fluids should include detection of microorganisms and endotoxin levels. Regarding the microbiological air sampling of operating rooms and immunocompromised units the types of clean rooms in which is recommended to perform microbiological air monitoring; the sample collection methods; culture media; incubation conditions; the most common microorganisms, and permissible levels depending on the type of surgery are described.

  20. Next Generation Microbiology Requirements

    NASA Technical Reports Server (NTRS)

    Ott, C. M.; Oubre, C. M.; Elliott, T. F.; Castro, V. A.; Pierson, D. L.

    2012-01-01

    As humans continue to explore deep into space, microorganisms will travel with them. The primary means to mitigate the risk of infectious disease are a combination of prudent spacecraft design and rigorous operational controls. The effectiveness of these methods are evaluated by microbiological monitoring of spacecraft, food, water, and the crew that is performed preflight, in-flight, and post-flight. Current NASA requirements associated with microbiological monitoring are based on culture-based methodology where microorganisms are grown on a semi-solid growth medium and enumerated. Subsequent identification of the organisms requires specialized labor and large equipment, which historically has been performed on Earth. Requirements that rely strictly on culture-based units limit the use of non-culture based monitoring technology. Specifically, the culture-based "measurement criteria" are Colony Forming Units (CFU, representing the growth of one microorganism at a single location on the agar medium) per a given volume, area, or sample size. As the CFU unit by definition is culture-based, these requirements limit alternative technologies for spaceflight applications. As spaceflight missions such as those to Mars extend further into space, culture-based technology will become difficult to implement due to the (a) limited shelf life of the culture media, (b) mass/volume necessary to carry these consumables, and (c) problems associated with the production of biohazardous material in the habitable volume of the spacecraft. In addition, an extensive amount of new knowledge has been obtained during the Space Shuttle, NASA-Mir, and International Space Station Programs, which gave direction for new or modified microbial control requirements for vehicle design and mission operations. The goal of this task is to develop and recommend a new set of requirements for vehicle design and mission operations, including microbiological monitoring, based upon "lessons learned" and new

  1. Microbiological treatment of radioactive wastes

    SciTech Connect

    Francis, A.J.

    1992-12-31

    The ability of microorganisms which are ubiquitous throughout nature to bring about information of organic and inorganic compounds in radioactive wastes has been recognized. Unlike organic contaminants, metals cannot be destroyed, but must be either removed or converted to a stable form. Radionuclides and toxic metals in wastes may be present initially in soluble form or, after disposal may be converted to a soluble form by chemical or microbiological processes. The key microbiological reactions include (i) oxidation/reduction; (ii) change in pH and Eh which affects the valence state and solubility of the metal; (iii) production of sequestering agents; and (iv) bioaccumulation. All of these processes can mobilize or stabilize metals in the environment.

  2. Potential application of quantitative microbiological risk assessment techniques to an aseptic-UHT process in the food industry.

    PubMed

    Pujol, Laure; Albert, Isabelle; Johnson, Nicholas Brian; Membré, Jeanne-Marie

    2013-04-01

    Aseptic ultra-high-temperature (UHT)-type processed food products (e.g., milk or soup) are ready to eat products which are consumed extensively globally due to a combination of their comparative high quality and long shelf life, with no cold chain or other preservation requirements. Due to the inherent microbial vulnerability of aseptic-UHT product formulations, the safety and stability-related performance objectives (POs) required at the end of the manufacturing process are the most demanding found in the food industry. The key determinants to achieving sterility, and which also differentiates aseptic-UHT from in-pack sterilised products, are the challenges associated with the processes of aseptic filling and sealing. This is a complex process that has traditionally been run using deterministic or empirical process settings. Quantifying the risk of microbial contamination and recontamination along the aseptic-UHT process, using the scientifically based process quantitative microbial risk assessment (QMRA), offers the possibility to improve on the currently tolerable sterility failure rate (i.e., 1 defect per 10,000 units). In addition, benefits of applying QMRA are (i) to implement process settings in a transparent and scientific manner; (ii) to develop a uniform common structure whatever the production line, leading to a harmonisation of these process settings, and; (iii) to bring elements of a cost-benefit analysis of the management measures. The objective of this article is to explore how QMRA techniques and risk management metrics may be applied to aseptic-UHT-type processed food products. In particular, the aseptic-UHT process should benefit from a number of novel mathematical and statistical concepts that have been developed in the field of QMRA. Probabilistic techniques such as Monte Carlo simulation, Bayesian inference and sensitivity analysis, should help in assessing the compliance with safety and stability-related POs set at the end of the manufacturing

  3. International Space Station Execution Replanning Process: Trends and Implications

    NASA Technical Reports Server (NTRS)

    McCormick, Robet J.

    2007-01-01

    International Space Station is a joint venture. Because of this, ISS execution planning- planning within the week for the ISS requires coordination across multiple partner, and the associated processes and tools to allow this coordination to occur. These processes and tools are currently defined and are extensively used. This paper summarizes these processes, and documents the current data trends associated with these processes and tools, with a focus on the metrics provided from the ISS Planning Product Change Request (PPCR) tool. As NASA's Vision for Space Exploration and general Human spaceflight trends are implemented, the probability of joint venture long duration programs such as ISS, with varying levels of intergovernmental and/or corporate partnership, will increase. Therefore, the results of this PPCR analysis serve as current Lessons learned for the ISS and for further similar ventures.

  4. [Quality assurance in food microbiology laboratories].

    PubMed

    Cwiek-Ludwicka, K; Windyga, B; Karłowski, K

    1996-01-01

    In the paper the quality assurance system in food microbiology laboratories to ensure the reliability of the analytical data are discussed. To introduce quality assurance system in the laboratory all activities such as sampling, method selection, laboratory environment, equipment, reagents and media, staff, reference materials, internal quality control and external quality control (proficiency testing) that effect on the results must be documented and controlled. The kind of food sample, condition and time of storage before analysis and proper selection of methodology have significant influence on the result of the microbiological analysis. Equipment used to carry out the test must work properly. Implementation of of the internal and external quality control to the routine work of the food microbiology laboratory means that the production of the results is under control and that the data are reliable. If the quality assurance system is properly implemented and well documented it makes the base for the laboratory to get the accreditation.

  5. The effect of chitosan-based edible film and high hydrostatic pressure process on the microbiological and chemical quality of rainbow trout (Oncorhynchus mykiss Walbaum) fillets during cold storage (4±1°C)

    NASA Astrophysics Data System (ADS)

    Günlü, Ali; Sipahioğlu, Sinem; Alpas, Hami

    2014-01-01

    The objective of this study is to determine the changes in the chemical and microbiological quality of fresh rainbow trout (Oncorhynchus mykiss Walbaum) fillets during storage at 4±1°C as a result of chitosan-based edible film coating, vacuum packaging and high pressure application processes. Chemical (pH, total volatile basic nitrogen and thiobarbituric acid index) and microbiological (total mesophilic and total psychrophilic microorganism) shelf life analyses were carried out in 4-day intervals for samples that were vacuum packaged (C), subjected to high pressure after vacuum packaging (high hydrostatic pressure (HHP)), vacuum packaged after being wrapped by chitosan-based film (CFW) and subjected to high pressure after vacuum packaging and being wrapped by chitosan-based film (HHP+CFW ). According to the chemical and microbiological shelf life analysis results of rainbow trout fillets, shelf life increases of 4 days in HHP group samples, 8 days in CFW group samples and 24 days in HHP+CFW group samples were provided in comparison with the control group. In conclusion, it was determined that high pressure and wrapping with chitosan-based film had protective effect both chemically and microbiologically and that the most effective protection was obtained when both methods were used together.

  6. Safety evaluation of sous vide-processed products with respect to nonproteolytic Clostridium botulinum by use of challenge studies and predictive microbiological models.

    PubMed

    Hyytiä-Trees, E; Skyttä, E; Mokkila, M; Kinnunen, A; Lindström, M; Lähteenmäki, L; Ahvenainen, R; Korkeala, H

    2000-01-01

    Sixteen different types of sous vide-processed products were evaluated for safety with respect to nonproteolytic group II Clostridium botulinum by using challenge tests with low (2. 0-log-CFU/kg) and high (5.3-log-CFU/kg) inocula and two currently available predictive microbiological models, Food MicroModel (FMM) and Pathogen Modeling Program (PMP). After thermal processing, the products were stored at 4 and 8 degrees C and examined for the presence of botulinal spores and neurotoxin on the sell-by date and 7 days after the sell-by date. Most of the thermal processes were found to be inadequate for eliminating spores, even in low-inoculum samples. Only 2 of the 16 products were found to be negative for botulinal spores and neurotoxin at both sampling times. Two products at the high inoculum level showed toxigenesis during storage at 8 degrees C, one of them at the sell-by date. The predictions generated by both the FMM thermal death model and the FMM and PMP growth models were found to be inconsistent with the observed results in a majority of the challenges. The inaccurate predictions were caused by the limited number and range of the controlling factors in the models. Based on this study, it was concluded that the safety of sous vide products needs to be carefully evaluated product by product. Time-temperature combinations used in thermal treatments should be reevaluated to increase the efficiency of processing, and the use of additional antibotulinal hurdles, such as biopreservatives, should be assessed. PMID:10618228

  7. Safety Evaluation of Sous Vide-Processed Products with Respect to Nonproteolytic Clostridium botulinum by Use of Challenge Studies and Predictive Microbiological Models

    PubMed Central

    Hyytiä-Trees, Eija; Skyttä, Eija; Mokkila, Mirja; Kinnunen, Arvo; Lindström, Miia; Lähteenmäki, Liisa; Ahvenainen, Raija; Korkeala, Hannu

    2000-01-01

    Sixteen different types of sous vide-processed products were evaluated for safety with respect to nonproteolytic group II Clostridium botulinum by using challenge tests with low (2.0-log-CFU/kg) and high (5.3-log-CFU/kg) inocula and two currently available predictive microbiological models, Food MicroModel (FMM) and Pathogen Modeling Program (PMP). After thermal processing, the products were stored at 4 and 8°C and examined for the presence of botulinal spores and neurotoxin on the sell-by date and 7 days after the sell-by date. Most of the thermal processes were found to be inadequate for eliminating spores, even in low-inoculum samples. Only 2 of the 16 products were found to be negative for botulinal spores and neurotoxin at both sampling times. Two products at the high inoculum level showed toxigenesis during storage at 8°C, one of them at the sell-by date. The predictions generated by both the FMM thermal death model and the FMM and PMP growth models were found to be inconsistent with the observed results in a majority of the challenges. The inaccurate predictions were caused by the limited number and range of the controlling factors in the models. Based on this study, it was concluded that the safety of sous vide products needs to be carefully evaluated product by product. Time-temperature combinations used in thermal treatments should be reevaluated to increase the efficiency of processing, and the use of additional antibotulinal hurdles, such as biopreservatives, should be assessed. PMID:10618228

  8. European journals on microbiology.

    PubMed

    Ronda, C; Vázquez, M

    1997-12-01

    A survey on the scientific journals dealing with microbiology published in Europe has been carried out. Eighteen European countries publish microbiological journals with the United Kingdom. Netherlands and Germany leading in number of journals on this specialty. Most of the European journals on microbiology are published bimonthly (27%), and English is the most common language used (54%). Most of these journals (86%) are included in some database, but only 36 (25%) are indexed in the six databases studied. Out of the 146 journals registered, 71 (49%), published in 11 European countries, are included in the 1995 Journal Citation Reports (ISI, Philadelphia).

  9. Computer Simulations in the High School: Students' Cognitive Stages, Science Process Skills and Academic Achievement in Microbiology.

    ERIC Educational Resources Information Center

    Huppert, J.; Lomask, S. Michal; Lazarowitz, R.

    2002-01-01

    Investigates the impact of computer simulation on students' academic achievement and their mastery of science process skills with regard to their cognitive stages. Based on the computer simulation program "The Growth Curve of Microorganisms" which requires 10th grade biology students to use problem solving skills while simultaneously manipulating…

  10. Verification of the hygienic adequacy of beef carcass cooling processes by microbiological culture and the temperature-function integration technique.

    PubMed

    Jericho, K W; O'Laney, G; Kozub, G C

    1998-10-01

    To enhance food safety and keeping quality, beef carcasses are cooled immediately after leaving the slaughter floor. Within hazard analysis and critical control point (HACCP) systems, this cooling process needs to be monitored by the industry and verified by regulatory agencies. This study assessed the usefulness of the temperature-function integration technique (TFIT) for the verification of the hygienic adequacy of two cooling processes for beef carcasses at one abattoir. The cooling process passes carcasses through a spray cooler for at least 17 h and a holding cooler for at least 7 h. The TFIT is faster and cheaper than culture methods. For spray cooler 1, the Escherichia coli generations predicted by TFIT for carcass surfaces (pelvic and shank sites) were compared to estimated E. coli counts from 120 surface excision samples (rump, brisket, and sacrum; 5 by 5 by 0.2 cm) before and after cooling. Counts of aerobic bacteria, coliforms, and E. coli were decreased after spray cooler 1 (P < or = 0.001). The number of E. coli generations (with lag) at the pelvic site calculated by TFIT averaged 0.85 +/- 0.19 and 0.15 +/- 0.04 after emerging from spray coolers 1 and 2, respectively. The TFIT (with lag) was considered convenient and appropriate for the inspection service to verify HACCP systems for carcass cooling processes. PMID:9798153

  11. Microbiological Testing of Skylab Foods

    PubMed Central

    Heidelbaugh, N. D.; Rowley, D. B.; Powers, E. M.; Bourland, C. T.; McQueen, J. L.

    1973-01-01

    The Skylab manned space flight program presented unique food microbiology problems. This challenge was successfully met by careful evaluation of the total Skylab food system by considering the nature of Skylab foods, their processing and handling, and Skylab food safety requirements. Some of the unique problems encountered with the Skylab foods involved: extended storage times, variations in storage temperatures, no opportunity to resupply or charge foods after launch of the Skylab Workshop, first use of frozen foods in space, first use of a food-warming device in weightlessness, relatively small size of production lots requiring statistically valid sampling plans, and use of the food as an accurately controlled segment of sophisticated life science experiments. Consideration of all of these situations generated the need for definitive microbiological tests and test limits. These tests are described in this paper along with the rationale for their selection. Test results are reported which show successful compliance with the test limits. Images PMID:4346978

  12. Microbiological Challenge Testing for Listeria Monocytogenes in Ready-to-Eat Food: A Practical Approach

    PubMed Central

    Scarano, Christian; Ibba, Michela; Pala, Carlo; Spanu, Vincenzo; De Santis, Enrico Pietro Luigi

    2014-01-01

    Food business operators (FBOs) are the primary responsible for the safety of food they place on the market. The definition and validation of the product’s shelf-life is an essential part for ensuring microbiological safety of food and health of consumers. In the frame of the Regulation (EC) No 2073/2005 on microbiological criteria for foodstuffs, FBOs shall conduct shelf-life studies in order to assure that their food does not exceed the food safety criteria throughout the defined shelf-life. In particular this is required for ready-to-eat (RTE) food that supports the growth of Listeria monocytogenes. Among other studies, FBOs can rely on the conclusion drawn by microbiological challenge tests. A microbiological challenge test consists in the artificial contamination of a food with a pathogen microorganism and aims at simulating its behaviour during processing and distribution under the foreseen storage and handling conditions. A number of documents published by international health authorities and research institutions describes how to conduct challenge studies. The authors reviewed the existing literature and described the methodology for implementing such laboratory studies. All the main aspects for the conduction of L. monocytogenes microbiological challenge tests were considered, from the selection of the strains, preparation and choice of the inoculum level and method of contamination, to the experimental design and data interpretation. The objective of the present document is to provide an exhaustive and practical guideline for laboratories that want to implement L. monocytogenes challenge testing on RTE food. PMID:27800369

  13. Microbiology and atmospheric processes: research challenges concerning the impact of airborne micro-organisms on the atmosphere and climate

    NASA Astrophysics Data System (ADS)

    Morris, C. E.; Sands, D. C.; Bardin, M.; Jaenicke, R.; Vogel, B.; Leyronas, C.; Ariya, P. A.; Psenner, R.

    2011-01-01

    For the past 200 years, the field of aerobiology has explored the abundance, diversity, survival and transport of micro-organisms in the atmosphere. Micro-organisms have been explored as passive and severely stressed riders of atmospheric transport systems. Recently, an interest in the active roles of these micro-organisms has emerged along with proposals that the atmosphere is a global biome for microbial metabolic activity and perhaps even multiplication. As part of a series of papers on the sources, distribution and roles in atmospheric processes of biological particles in the atmosphere, here we describe the pertinence of questions relating to the potential roles that air-borne micro-organisms might play in meteorological phenomena. For the upcoming era of research on the role of air-borne micro-organisms in meteorological phenomena, one important challenge is to go beyond descriptions of abundance of micro-organisms in the atmosphere toward an understanding of their dynamics in terms of both biological and physico-chemical properties and of the relevant transport processes at different scales. Another challenge is to develop this understanding under contexts pertinent to their potential role in processes related to atmospheric chemistry, the formation of clouds, precipitation and radiative forcing. This will require truly interdisciplinary approaches involving collaborators from the biological and physical sciences, from disciplines as disparate as agronomy, microbial genetics and atmosphere physics, for example.

  14. Integrating ongoing evaluation process for international pediatric nursing courses.

    PubMed

    Katz, S; Hendel, T

    1998-01-01

    Two international pediatric courses for nurses from developing countries were planned and implemented in Israel during the past 2 years. The courses consisted of 53 RNs from 29 countries. The purpose of this article is to describe the ongoing evaluation and follow-up process of these courses. Findings indicated that the majority of nurses expressed: a) high satisfaction with the course and felt it enhanced their professional capacity and practice, and benefited their colleagues and superiors; b) high motivation and enthusiasm to improve nursing practices in their home countries; c) changes in attitudes and beliefs relating to pediatric nursing. PMID:9652268

  15. Microbiology: a dangerous profession?

    PubMed

    Piqueras, Mercè

    2007-09-01

    The history of science contains many cases of researchers who have died because of their professional activity. In the field of microbiology, some have died or have come close to death from infection by agents that were the subject of their research (Table 1). Infections that had a lethal outcome were usually accidental. Sometimes, however, researchers inoculated themselves with the pathogen or did not take preventive measures against the potential pathogen because they wanted to prove their hypotheses--or disprove someone else's--regarding the origin of the infection. Here is an overview of several episodes in the history of microbiology since the mid nineteenth century involving researchers or workers in fields related to microbiology who have become infected. They are considered here in their historical context to provide insights into some of the pillars of modern microbiology--The giants on whose shoulders several generations of microbiologists have stood to see further.

  16. Subsurface Microbiology and Biogeochemistry

    SciTech Connect

    Fredrickson, Jim K.; Fletcher, Madilyn

    2001-05-01

    Jim contributed a chapter to this book, in addition to co-editing it with Madilyn Fletcher. Fredrickson, J. K., and M. Fletcher. (eds.) 2001 Subsurface Microbiology and Biogeochemistry. Wiley-Liss, Inc., New York.

  17. Microbiology in Introductory Biology.

    ERIC Educational Resources Information Center

    Callery, Michael L.; And Others

    1980-01-01

    Describes a microbiology unit developed for an introductory college biology course in which the identity of an unknown bacterium is determined. Also described is an interactive taxonomy computer program which aids in the identity of the unknown organism. (CS)

  18. Internal social processes of discipline formation: the case of kinanthropometry.

    PubMed

    Vangrunderbeek, Hans; Claessens, Albrecht L; Delheye, Pascal

    2013-01-01

    In 1972, the term 'kinanthropometry', derived from the Greek words 'kinein' (to move), 'anthropos' (human) and 'metrein' (to measure), was launched in the international, Francophone journal Kinanthropologie by the Canadian William Ross and the Belgians, Marcel Hebbelinck, Bart Van Gheluwe and Marie-Louise Lemmens. The authors defined this neologism as 'the scientific discipline for the study of the size, shape, proportion, scope and composition of the human being and its gross motor functions'. Presenting a theoretical framework for the analysis of the internal social processes of discipline formation - derived from the social history-of-science tradition - this article critically examines whether kinanthropometry was indeed promoted and developed by its community members as a scientific discipline. Therefore, the focus will be on its conceptualisation and positioning within the field of kinanthropology/kinesiology and on its development by a scholarly association, i.e. the International Working Group on Kinanthropometry (IWGK). The strong emphasis of the kinanthropometry community on the standardisation of measurement techniques and its practical and professional application hampered its disciplinary development. Findings of this study could serve as a basis for future 'fundamental' investigations addressing questions of disciplinary development within the field(s) of physical education, kinesiology and sport science(s).

  19. The role of internal and external constructive processes in evolution

    PubMed Central

    Laland, Kevin; Odling-Smee, John; Turner, Scott

    2014-01-01

    The architects of the Modern Synthesis viewed development as an unfolding of a form already latent in the genes. However, developing organisms play a far more active, constructive role in both their own development and their evolution than the Modern Synthesis proclaims. Here we outline what is meant by constructive processes in development and evolution, emphasizing how constructive development is a shared feature of many of the research developments central to the developing Extended Evolutionary Synthesis. Our article draws out the parallels between constructive physiological processes expressed internally and in the external environment (niche construction), showing how in each case they play important and not fully recognized evolutionary roles by modifying and biasing natural selection. PMID:24591574

  20. An International Perspective on Pharmacy Student Selection Policies and Processes

    PubMed Central

    Kennedy, Julia; Jensen, Maree; Sheridan, Janie

    2015-01-01

    Objective. To reflect on selection policies and procedures for programs at pharmacy schools that are members of an international alliance of universities (Universitas 21). Methods. A questionnaire on selection policies and procedures was distributed to admissions directors at participating schools. Results. Completed questionnaires were received from 7 schools in 6 countries. Although marked differences were noted in the programs in different countries, there were commonalities in the selection processes. There was an emphasis on previous academic performance, especially in science subjects. With one exception, all schools had some form of interview, with several having moved to multiple mini-interviews in recent years. Conclusion. The majority of pharmacy schools in this survey relied on traditional selection processes. While there was increasing use of multiple mini-interviews, the authors suggest that additional new approaches may be required in light of the changing nature of the profession. PMID:26689381

  1. Effect of high pressure processing on textural and microbiological quality of pink perch (Nemipterus japonicus) sausage during chilled storage

    NASA Astrophysics Data System (ADS)

    Kunnath, Sarika; Panda, Satyen Kumar; Jaganath, Bindu; Gudipati, Venkateshwarlu

    2015-10-01

    The non-thermal high pressure (HP) processing was studied on fish sausage to enhance the quality during chilled storage. Pink perch (Nemipterus japonicus) sausages, packed in poly amide casing under vacuum were subjected to 400, 500 and 600 MPa pressures (dwell time: 10 min and ramp rate: 300 MPa/min) and compared with heat-set samples for physico-chemical and microbial quality parameters. Pressurized samples formed softer and glossier gels with a slight reduction in water-holding capacity. HP made the texture of sausage softer, cohesive and less chewy and gummier than heat-treated ones. Folding test seen higher acceptance values in samples treated at 500 and 600 MPa, during storage. Maximum log reduction in microbial count was observed in 600 MPa immediately, and significant difference in cooked and pressurized sausages was seen only up to 7th day. This revealed the potential application of HP in replacing conventional heat treatment for sausages preparation with enhanced shelf-life.

  2. Vadose zone microbiology

    SciTech Connect

    Kieft, Thomas L.; Brockman, Fred J.

    2001-01-17

    The vadose zone is defined as the portion of the terrestrial subsurface that extends from the land surface downward to the water table. As such, it comprises the surface soil (the rooting zone), the underlying subsoil, and the capillary fringe that directly overlies the water table. The unsaturated zone between the rooting zone and the capillary fringe is termed the "intermediate zone" (Chapelle, 1993). The vadose zone has also been defined as the unsaturated zone, since the sediment pores and/or rock fractures are generally not completely water filled, but instead contain both water and air. The latter characteristic results in the term "zone of aeration" to describe the vadose zone. The terms "vadose zone," "unsaturated zone", and "zone of aeration" are nearly synonymous, except that the vadose zone may contain regions of perched water that are actually saturated. The term "subsoil" has also been used for studies of shallow areas of the subsurface immediately below the rooting zone. This review focuses almost exclusively on the unsaturated region beneath the soil layer since there is already an extensive body of literature on surface soil microbial communities and process, e.g., Paul and Clark (1989), Metting (1993), Richter and Markowitz, (1995), and Sylvia et al. (1998); whereas the deeper strata of the unsaturated zone have only recently come under scrutiny for their microbiological properties.

  3. PREFACE: International Workshop on Multi-Rate processes and Hysterisis

    NASA Astrophysics Data System (ADS)

    Mortell, Michael P.; O'Malley, Robert E.; Pokrovskii, Alexei V.; Sobolev, Vladimir A.

    2006-12-01

    We are interested in singular perturbation problems and hysteresis as common strongly nonlinear phenomena that occur in many industrial, physical and economic systems. The wording `strongly nonlinear' means that linearization will not encapsulate the observed phenomena. Often these two types of phenomena are manifested for different stages of the same or similar processes. A number of fundamental hysteresis models can be considered as limit cases of time relaxation processes, or admit an approximation by a differential equation which is singular with respect to a particular parameter. However, the amount of interaction between practitioners of theories of systems with time relaxation and systems with hysteresis (and between the `relaxation' and `hysteresis' research communities) is still low. In recent years Ireland has become a home for a series of prestigious International Workshops in Singular Perturbations and Hysteresis: International Workshop on Hysteresis and Multi-scale Asymptotics (University College Cork, Ireland, 17-21 March 2004). Proceedings are published in Journal of Physics: Conference Series 22. International Workshop on Relaxation Oscillations and Hysteresis (University College Cork, Ireland, 1-6 April 2002). The related collection of invited lectures, was published as a volume Singular Perturbations and Hysteresis, SIAM, Philadelphia, 2005. International Workshop on Geometrical Methods of Nonlinear Analysis and Semiconductor Laser Dynamics (University College Cork, Ireland, 5-5 April 2001). A collection of invited papers has been published as a special issue of Proceedings of the Russian Academy of Natural Sciences: Nonlinear dynamics of laser and reacting systems. Among the aims of these workshops were to bring together leading experts in time relaxation and hysteresis phenomena in applied problems; to discuss important problems in areas such as reacting systems, semiconductor lasers, shock phenomena in economic modelling, fluid mechanics, etc

  4. Internal wave signal processing: A model-based approach

    SciTech Connect

    Candy, J.V.; Chambers, D.H.

    1995-02-22

    A model-based approach is proposed to solve the oceanic internal wave signal processing problem that is based on state-space representations of the normal-mode vertical velocity and plane wave horizontal velocity propagation models. It is shown that these representations can be utilized to spatially propagate the modal (depth) vertical velocity functions given the basic parameters (wave numbers, Brunt-Vaisala frequency profile etc.) developed from the solution of the associated boundary value problem as well as the horizontal velocity components. These models are then generalized to the stochastic case where an approximate Gauss-Markov theory applies. The resulting Gauss-Markov representation, in principle, allows the inclusion of stochastic phenomena such as noise and modeling errors in a consistent manner. Based on this framework, investigations are made of model-based solutions to the signal enhancement problem for internal waves. In particular, a processor is designed that allows in situ recursive estimation of the required velocity functions. Finally, it is shown that the associated residual or so-called innovation sequence that ensues from the recursive nature of this formulation can be employed to monitor the model`s fit to the data.

  5. PREFACE: International Workshop on Multi-Rate Processes and Hysteresis

    NASA Astrophysics Data System (ADS)

    Mortell, Michael P.; O'Malley, Robert E.; Pokrovskii, Alexei; Rachinskii, Dmitrii; Sobolev, Vladimir A.

    2008-07-01

    We are interested in singular perturbation problems and hysteresis as common strongly nonlinear phenomena that occur in many industrial, physical and economic systems. The wording `strongly nonlinear' means that linearization will not encapsulate the observed phenomena. Often these two types of phenomena are manifested for different stages of the same or similar processes. A number of fundamental hysteresis models can be considered as limit cases of time relaxation processes, or admit an approximation by a differential equation which is singular with respect to a particular parameter. However, the amount of interaction between practitioners of theories of systems with time relaxation and systems with hysteresis (and between the `relaxation' and `hysteresis' research communities) is still low, and cross-fertilization is small. In recent years Ireland has become a home for a series of prestigious International Workshops in Singular Perturbations and Hysteresis: International Workshop on Multi-rate Processes and Hysteresis (University College Cork, Ireland, 3-8 April 2006). Proceedings are published in Journal of Physics: Conference Series, volume 55. See further information at http://euclid.ucc.ie/murphys2008.htm International Workshop on Hysteresis and Multi-scale Asymptotics (University College Cork, Ireland, 17-21 March 2004). Proceedings are published in Journal of Physics: Conference Series, volume 22. See further information at http://euclid.ucc.ie/murphys2006.htm International Workshop on Relaxation Oscillations and Hysteresis (University College Cork, Ireland, 1-6 April 2002). The related collection of invited lectures, was published as a volume Singular Perturbations and Hysteresis, SIAM, Philadelphia, 2005. See further information at http://euclid.ucc.ie/hamsa2004.htm International Workshop on Geometrical Methods of Nonlinear Analysis and Semiconductor Laser Dynamics (University College Cork, Ireland, 5-5 April 2001). A collection of invited papers has been

  6. International online support to process optimisation and operation decisions.

    PubMed

    Onnerth, T B; Eriksson, J

    2002-01-01

    The information level at all technical facilities has developed from almost nothing 30-40 years ago to advanced IT--Information Technology--systems based on both chemical and mechanical on-line sensors for process and equipment. Still the basic part of information is to get the right data at the right time for the decision to be made. Today a large amount of operational data is available at almost any European wastewater treatment plant, from laboratory and SCADA. The difficult part is to determine which data to keep, which to use in calculations and how and where to make data available. With the STARcontrol system it is possible to separate only process relevant data to use for on-line control and reporting at engineering level, to optimise operation. Furthermore, the use of IT makes it possible to communicate internationally, with full access to the whole amount of data on the single plant. In this way, expert supervision can be both very local in local language e.g. Polish and at the same time very professional with Danish experts advising on Danish processes in Poland or Sweden where some of the 12 STARcontrol systems are running. PMID:11936670

  7. Fourth-order perturbative model for photoinduced internal conversion processes.

    PubMed

    Molesky, Brian P; Moran, Andrew M

    2013-12-27

    Essential to the functionality of numerous biological and synthetic molecular systems is the ability to rapidly convert electronic excitation energy into heat. Such internal conversion (IC) transitions often cannot be described by traditional second-order kinetic theories because of time-coincident electronic and nuclear relaxation processes. Here, we present a perturbative fourth-order phenomenological model for photoinduced IC that incorporates effects associated with finite laser bandwidths and nonequilibrium nuclear motions. Specialized knowledge of first-principles computational methods is not required, and many parameters can be obtained with standard spectroscopic measurements. The model is applied to the IC processes that precede electrocyclic ring-opening in α-terpinene. It is shown that the primary factor governing the shape of the population decay profile (Gaussian versus exponential) is the rate at which the wavepacket approaches the geometry corresponding to degeneracy between the excited states. Other parameters such as the displacement in the promoting mode and the thermal fluctuation amplitudes affect the sensitivity of the IC dynamics to motion of the wavepacket but do not alter the basic physical picture. Finally, we suggest a wavepacket representation of the IC process to visualize correlations between population-transfer dynamics and the amount of energy transferred from the system to the bath.

  8. MICROBIOLOGICAL REMOVAL BY FILTRATION PROCESSES

    EPA Science Inventory

    Filtration ws originally used to remove contaminants that affect the appearance, odor, and taste of drinking water. Later it was demonstrated that bacteria in drinking water were causative agents of disease. Water treatment technology improved with the addition of disinfection, c...

  9. 47 CFR 1.574 - Processing of international broadcast station applications.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Processing of international broadcast station... PROCEDURE Broadcast Applications and Proceedings General Filing Requirements § 1.574 Processing of international broadcast station applications. See § 73.3574....

  10. 77 FR 53236 - Proposed International Isotopes Fluorine Extraction Process and Depleted Uranium Deconversion...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-31

    ... COMMISSION Proposed International Isotopes Fluorine Extraction Process and Depleted Uranium Deconversion... International Isotopes Fluorine Extraction Process and Depleted Uranium Deconversion Plant (INIS) in Lea County... construction, operation, and decommissioning of a fluorine extraction and depleted uranium...

  11. Consolidated clinical microbiology laboratories.

    PubMed

    Sautter, Robert L; Thomson, Richard B

    2015-05-01

    The manner in which medical care is reimbursed in the United States has resulted in significant consolidation in the U.S. health care system. One of the consequences of this has been the development of centralized clinical microbiology laboratories that provide services to patients receiving care in multiple off-site, often remote, locations. Microbiology specimens are unique among clinical specimens in that optimal analysis may require the maintenance of viable organisms. Centralized laboratories may be located hours from patient care settings, and transport conditions need to be such that organism viability can be maintained under a variety of transport conditions. Further, since the provision of rapid results has been shown to enhance patient care, effective and timely means for generating and then reporting the results of clinical microbiology analyses must be in place. In addition, today, increasing numbers of patients are found to have infection caused by pathogens that were either very uncommon in the past or even completely unrecognized. As a result, infectious disease specialists, in particular, are more dependent than ever on access to high-quality diagnostic information from clinical microbiology laboratories. In this point-counterpoint discussion, Robert Sautter, who directs a Charlotte, NC, clinical microbiology laboratory that provides services for a 40-hospital system spread over 3 states in the southeastern United States explains how an integrated clinical microbiology laboratory service has been established in a multihospital system. Richard (Tom) Thomson of the NorthShore University HealthSystem in Evanston, IL, discusses some of the problems and pitfalls associated with large-scale laboratory consolidation.

  12. Microbiological safety and quality of Mozzarella cheese assessed by the microbiological survey method.

    PubMed

    Losito, Francesca; Arienzo, Alyexandra; Bottini, Giorgia; Priolisi, Francesca Romana; Mari, Alberto; Antonini, Giovanni

    2014-01-01

    Dairy products are characterized by reduced shelf life because they are an excellent growth medium for a wide range of microorganisms. For this reason, it is important to monitor the microbiological quality of dairy products and, in particular, the total viable count and concentration of Escherichia coli, as they are indicators of the hygienic state of these products. In addition, in dairy products such as Mozzarella cheese, it is important to monitor the concentration of lactic acid bacteria (LAB), as they are the major components of starter cultures used in cheese production, contributing to the taste and texture of fermented products and inhibiting food spoilage bacteria by producing growth-inhibiting substances. For these reasons, to ensure the quality and safety of their products, cheese makers should monitor frequently, during fresh cheese production, the concentration of LAB and spoilage bacteria. However, usually, small- to medium-size dairy factories do not have an internal microbiological laboratory and external laboratories of analysis are often too expensive and require several days for the results. Compared with traditional methods, the microbiological survey (MBS) method developed by Roma Tre University (Rome, Italy) allows faster and less-expensive microbiological analyses to be conducted wherever they are necessary, without the need for a microbiological laboratory or any instrumentation other than MBS vials and a thermostat. In this paper, we report the primary validation of the MBS method to monitor LAB concentration in Mozzarella cheese and the analysis, using the MBS method, of total viable count, E. coli, and LAB concentrations in the production line of Mozzarella cheese as well as during the shelf life of the product stored at 20°C. The results obtained indicate that the MBS method may be successfully used by small- to medium-size dairy factories that do not have an internal microbiological laboratory. Using the MBS method, these dairy

  13. Microbiology on Space Station Freedom

    NASA Technical Reports Server (NTRS)

    Pierson, Duane L. (Editor); Mcginnis, Michael R. (Editor); Mishra, S. K. (Editor); Wogan, Christine F. (Editor)

    1991-01-01

    This panel discussion convened in Houston, Texas, at the Lunar and Planetary Institute, on November 6 to 8, 1989, to review NASA's plans for microbiology on Space Station Freedom. A panel of distinguished scientists reviewed, validated, and recommended revisions to NASA's proposed acceptability standards for air, water, and internal surfaces on board Freedom. Also reviewed were the proposed microbiology capabilities and monitoring plan, disinfection procedures, waste management, and clinical issues. In the opinion of this advisory panel, ensuring the health of the Freedom's crews requires a strong goal-oriented research effort to determine the potential effects of microorganisms on the crewmembers and on the physical environment of the station. Because there are very few data addressing the fundamental question of how microgravity influences microbial function, the panel recommended establishing a ground-based microbial model of Freedom, with subsequent evaluation using in-flight shuttle data. Sampling techniques and standards will be affected by both technological advances in microgravity-compatible instrumentation, and by changes in the microbial population over the life of the station.

  14. Microbiological Methodology in Astrobiology

    NASA Technical Reports Server (NTRS)

    Abyzov, S. S.; Gerasimenko, L. M.; Hoover, R. B.; Mitskevich, I. N.; Mulyukin, A. L.; Poglazova, M. N.; Rozanov, A. Y.

    2005-01-01

    Searching for life in astromaterials to be delivered from the future missions to extraterrestrial bodies is undoubtedly related to studies of the properties and signatures of living microbial cells and microfossils on Earth. As model terrestrial analogs of Martian polar subsurface layers are often regarded the Antarctic glacier and Earth permafrost habitats where alive microbial cells preserved viability for millennia years due to entering the anabiotic state. For the future findings of viable microorganisms in samples from extraterrestrial objects, it is important to use a combined methodology that includes classical microbiological methods, plating onto nutrient media, direct epifluorescence and electron microscopy examinations, detection of the elemental composition of cells, radiolabeling techniques, PCR and FISH methods. Of great importance is to ensure authenticity of microorganisms (if any in studied samples) and to standardize the protocols used to minimize a risk of external contamination. Although the convincing evidence of extraterrestrial microbial life will may come from the discovery of living cells in astromaterials, biomorphs and microfossils must also be regarded as a target in search of life evidence bearing in mind a scenario that alive microorganisms had not be preserved and underwent mineralization. Under the laboratory conditions, processes that accompanied fossilization of cyanobacteria were reconstructed, and artificially produced cyanobacterial stromatolites resembles by their morphological properties those found in natural Earth habitats. Regarding the vital importance of distinguishing between biogenic and abiogenic signatures and between living and fossil microorganisms in analyzed samples, it is worthwhile to use some previously developed approaches based on electron microscopy examinations and analysis of elemental composition of biomorphs in situ and comparison with the analogous data obtained for laboratory microbial cultures and

  15. The International Space Station human life sciences experiment implementation process

    NASA Technical Reports Server (NTRS)

    Miller, L. J.; Haven, C. P.; McCollum, S. G.; Lee, A. M.; Kamman, M. R.; Baumann, D. K.; Anderson, M. E.; Buderer, M. C.

    2001-01-01

    The selection, definition, and development phases of a Life Sciences flight research experiment has been consistent throughout the past decade. The implementation process, however, has changed significantly within the past two years. This change is driven primarily by the shift from highly integrated, dedicated research missions on platforms with well defined processes to self contained experiments with stand alone operations on platforms which are being concurrently designed. For experiments manifested on the International Space Station (ISS) and/or on short duration missions, the more modular, streamlined, and independent the individual experiment is, the more likely it is to be successfully implemented before the ISS assembly is completed. During the assembly phase of the ISS, science operations are lower in priority than the construction of the station. After the station has been completed, it is expected that more resources will be available to perform research. The complexity of implementing investigations increases with the logistics needed to perform the experiment. Examples of logistics issues include- hardware unique to the experiment; large up and down mass and volume needs; access to crew and hardware during the ascent or descent phases; maintenance of hardware and supplies with a limited shelf life,- baseline data collection schedules with lengthy sessions or sessions close to the launch or landing; onboard stowage availability, particularly cold stowage; and extensive training where highly proficient skills must be maintained. As the ISS processes become better defined, experiment implementation will meet new challenges due to distributed management, on-orbit resource sharing, and adjustments to crew availability pre- and post-increment. c 2001. Elsevier Science Ltd. All rights reserved.

  16. The International Space Station human life sciences experiment implementation process.

    PubMed

    Miller, L J; Haven, C P; McCollum, S G; Lee, A M; Kamman, M R; Baumann, D K; Anderson, M E; Buderer, M C

    2001-01-01

    The selection, definition, and development phases of a Life Sciences flight research experiment has been consistent throughout the past decade. The implementation process, however, has changed significantly within the past two years. This change is driven primarily by the shift from highly integrated, dedicated research missions on platforms with well defined processes to self contained experiments with stand alone operations on platforms which are being concurrently designed. For experiments manifested on the International Space Station (ISS) and/or on short duration missions, the more modular, streamlined, and independent the individual experiment is, the more likely it is to be successfully implemented before the ISS assembly is completed. During the assembly phase of the ISS, science operations are lower in priority than the construction of the station. After the station has been completed, it is expected that more resources will be available to perform research. The complexity of implementing investigations increases with the logistics needed to perform the experiment. Examples of logistics issues include- hardware unique to the experiment; large up and down mass and volume needs; access to crew and hardware during the ascent or descent phases; maintenance of hardware and supplies with a limited shelf life,- baseline data collection schedules with lengthy sessions or sessions close to the launch or landing; onboard stowage availability, particularly cold stowage; and extensive training where highly proficient skills must be maintained. As the ISS processes become better defined, experiment implementation will meet new challenges due to distributed management, on-orbit resource sharing, and adjustments to crew availability pre- and post-increment.

  17. The international space station human life sciences experiment implementation process

    NASA Astrophysics Data System (ADS)

    Miller, LadonnaJ.; Haven, CynthiaP.; McCollum, SuzanneG.; Lee, AngeleneM.; Kamman, MichelleR.; Baumann, DavidK.; Anderson, MarkE.; Buderer, MelvinC.

    2001-08-01

    The selection, definition, and development phases of a Life Sciences flight research experiment has been consistent throughout the past decade. The implementation process, however, has changed significantly within the past two years. This change is driven primarily by the shift from highly integrated, dedicated research missions on platforms with well defined processes to self contained experiments with stand alone operations on platforms which are being concurrently designed. For experiments manifested on the International Space Station (ISS) and / or on short duration missions, the more modular, streamlined, and independent the individual experiment is, the more likely it is to be successfully implemented before the ISS assembly is completed. During the assembly phase of the ISS, science operations are lower in priority than the construction of the station. After the station has been completed, it is expected that more resources will be available to perform research. The complexity of implementing investigations increases with the logistics needed to perform the experiment. Examples of logistics issues include: hardware unique to the experiment; large up and down mass and volume needs; access to crew and hardware during the ascent or descent phases; maintenance of hardware and supplies with a limited shelf life; baseline data collection schedules with lengthy sessions or sessions close to the launch or landing; onboard stowage availability, particularly cold stowage; and extensive training where highly proficient skills must be maintained. As the ISS processes become better defined, experiment implementation will meet new challenges due to distributed management, on-orbit resource sharing, and adjustments to crew availability pre- and post-increment.

  18. 21 CFR 211.113 - Control of microbiological contamination.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Control of microbiological contamination. 211.113... Process Controls § 211.113 Control of microbiological contamination. (a) Appropriate written procedures... contamination of drug products purporting to be sterile, shall be established and followed. Such...

  19. Restructuring a General Microbiology Laboratory into an Investigative Experience.

    ERIC Educational Resources Information Center

    Deutch, Charles E.

    1994-01-01

    Describes an investigative laboratory sequence based upon the isolation and characterization of soil bacteria to aid microbiology teachers in providing students with activities that expose them to basic techniques of microbiology as well as demonstrates the scientific process and the experimental analysis of microorganisms. (ZWH)

  20. 78 FR 18321 - International Code Council: The Update Process for the International Codes and Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-26

    ... Fuel Gas Code. International Green Construction Code. International Mechanical Code. ICC Performance... for Residential Construction in High Wind Regions. ICC 700: National Green Building Standard The... proposals from interested individuals and organizations involved in the construction industry as well as...

  1. Coupled physical, chemical, and microbiological measurements suggest a connection between internal waves and surf zone water quality in the Southern California Bight

    NASA Astrophysics Data System (ADS)

    Wong, Simon H. C.; Santoro, Alyson E.; Nidzieko, Nicholas J.; Hench, James L.; Boehm, Alexandria B.

    2012-02-01

    Internal waves have been implicated in the cross-shore transport of scalars such as larvae, nutrients, and pollutants at locations around the world. The present study combines physical measurements with a comprehensive set of surf zone water quality measurements to evaluate the possible impact of cross-shore internal wave transport on surf zone water quality during two study periods. An array of oceanographic moorings was deployed in the summer of 2005 and 2006 at 10-20 m depth offshore of the beach to observe internal waves. Concurrently, surf zone water quality was assessed twice daily at night at an adjacent station (Huntington State Beach) by measuring concentration of phosphate, dissolved inorganic nitrogen (DIN), silicate, chlorophyll a, fecal indicator bacteria (FIB), and the human-specific fecal DNA marker in Bacteroidales. The baroclinic component accounted for about 30% of the total variance in water column velocity, indicating the importance of density-driven flow during the summer when the water column was stratified. Arrival of cold subthermocline water in the very nearshore (within 1 km of the surf zone) was characterized by strong baroclinic onshore flow near the bottom of the water column. The near bottom, baroclinic, cross-shore current was significantly lag-correlated with the near bottom temperature data along a cross-shore transect towards shore, demonstrating shoreward transport of cold subthermocline water. Wavelet analysis of temperature data showed that non-stationary temperature fluctuations were correlated with buoyancy frequency and the near bottom cross-shore baroclinic current. During periods of large temperature fluctuations, the majority of the variance was within the semi-diurnal band; however, the diurnal and high frequency bands also contained a substantial fraction of total variance. The bottom cross-shore baroclinic current was proposed as a proxy for shoreward transport potential by internal waves and was positively correlated

  2. Microbiology--Safety Considerations.

    ERIC Educational Resources Information Center

    Hoffmann, Sheryl K.

    This paper discusses the risk assessment associated with microbiology instruction based on grade level, general control measures, appropriate activities for middle school and high school students, the preparation and sterilization of equipment, and safe handling techniques. Appended are instructions and figures on making wire loops and the…

  3. Making Microbiology Even Smaller!

    ERIC Educational Resources Information Center

    Young, Linda Mull; Motz, Vicki Abrams

    2013-01-01

    We outline protocols for producing slant-minis (SLINIs) and mini-deeps (MEEPs) and examples of their use in simple microbiology experiments suitable for high school students. The principal benefits of these protocols are decreased cost associated with significantly reduced media use; easier, less expensive disposal of waste; and increased safety…

  4. INTRODUCTION TO ENVIRONMENTAL MICROBIOLOGY

    EPA Science Inventory

    Environmental microbiology is the study of those microorganisms which exist in natural or artificial environments. The origin of scientific research in this field rests in the observations of Antony van Leewenhoeck that were published in 1677(4). Van Leewenhoeck used a microsco...

  5. Microbiology Made Relevant

    ERIC Educational Resources Information Center

    Cronholm, Lois S.; Metz, Mildred C.

    1976-01-01

    Described are two hospital-based laboratory exercises which helped students perceive the relationship between the principles of microbiology and the practice of nursing. The exercises involved an environmental study focusing on problems of nosocomial infection and a study of patients hospitalized with infectious diseases. (Author/MS)

  6. [Bacterial identification methods in the microbiology laboratory].

    PubMed

    Bou, Germán; Fernández-Olmos, Ana; García, Celia; Sáez-Nieto, Juan Antonio; Valdezate, Sylvia

    2011-10-01

    In order to identify the agent responsible of the infectious process and understanding the pathogenic/pathological implications, clinical course, and to implement an effective antimicrobial therapy, a mainstay in the practice of clinical microbiology is the allocation of species to a microbial isolation. In daily routine practice microbiology laboratory phenotypic techniques are applied to achieve this goal. However, they have some limitations that are seen more clearly for some kinds of microorganism. Molecular methods can circumvent some of these limitations, although its implementation is not universal. This is due to higher costs and the level of expertise required for thei implementation, so molecular methods are often centralized in reference laboratories and centers. Recently, proteomics-based methods made an important breakthrough in the field of diagnostic microbiology and will undoubtedly have a major impact on the future organization of the microbiology services. This paper is a short review of the most noteworthy aspects of the three bacterial identification methods described above used in microbiology laboratories.

  7. MICROBIOLOGICAL QUALITY OF FOOD SUPPLEMENTS.

    PubMed

    Ratajczak, Magdalena; Kubicka, Marcelina M; Kamińska, Dorota; Długaszewska, Jolanta

    2015-01-01

    Many specialists note that the food offered today - as a result of very complex technological processing - is devoid of many components that are important for the organism and the shortages have to be supplemented. The simplest for it is to consume diet supplements that provide the missing element in a concentrated form. In accordance with the applicable law, medicinal products include all substances or mixtures of substances that are attributed with properties of preventing or treating diseases with humans or animals. Permits to admit supplements to the market are issued by the Chief Sanitary Inspector and the related authorities; permits for medicines are issued by the Chief Pharmaceutical Inspector and the Office for Registration of Medicinal Products, Medical Devices and Biocidal Products. Therefore, admittance of a supplement to the market is less costly and time consuming_than admittance of a medicine. Supplements and medicines may contain the same component but medicines will have a larger concentration than supplements. Sale of supplements at drug stores and in the form of tablets, capsules, liquids or powders makes consumer often confusing supplements with medicines. Now there are no normative documents specifying limits of microbiological impurities in diet supplements. In Polish legislation, diet supplements are subject to legal acts concerning food. Medicines have to comply with microbiological purity requirements specified in the Polish Pharmacopeia. As evidenced with the completed tests, the proportion of diet supplement samples with microbiological impurities is 6.5%. Sales of diet supplements have been growing each year, they are consumed by healthy people but also people with immunology deficiencies and by children and therefore consumers must be certain that they buy safe products. PMID:26642690

  8. Ultrasonic non invasive techniques for microbiological instrumentation

    NASA Astrophysics Data System (ADS)

    Elvira, L.; Sierra, C.; Galán, B.; Resa, P.

    2010-01-01

    Non invasive techniques based on ultrasounds have advantageous features to study, characterize and monitor microbiological and enzymatic reactions. These processes may change the sound speed, viscosity or particle distribution size of the medium where they take place, which makes possible their analysis using ultrasonic techniques. In this work, two different systems for the analysis of microbiological liquid media based on ultrasounds are presented. In first place, an industrial application based on an ultrasonic monitoring technique for microbiological growth detection in milk is shown. Such a system may improve the quality control strategies in food production factories, being able to decrease the time required to detect possible contaminations in packed products. Secondly, a study about the growing of the Escherichia coli DH5 α in different conditions is presented. It is shown that the use of ultrasonic non invasive characterization techniques in combination with other conventional measurements like optical density provides complementary information about the metabolism of these bacteria.

  9. 47 CFR 63.12 - Processing of international Section 214 applications.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 3 2013-10-01 2013-10-01 false Processing of international Section 214... and Supplements § 63.12 Processing of international Section 214 applications. (a) Except as provided... leasehold interest in bare capacity in international or domestic telecommunications facilities...

  10. DNA technologies: what's next applied to microbiology research?

    PubMed

    Trevors, J T; Masson, L

    2010-10-01

    This perspective discusses current DNA technologies used in basic and applied microbiology research and speculates on possible new future technologies. DNA remains one of the most fascinating molecules known to humans and will continue to revolutionize many areas ranging from medicine, food and forensics to robotics and new industrial bioproducts/biofuel from waste materials. What's next with DNA is not always obvious, but history shows the international microbiology research community will readily adopt it.

  11. A Selected Bibliography on Microbiological Laboratory Design.

    ERIC Educational Resources Information Center

    Laboratory Design Notes, 1967

    1967-01-01

    Reference sources on microbiological laboratory design are cited. Subjects covered include--(1) policies and general requirements, (2) ventilated cabinets, (3) animal isolation equipment, (4) air handling, ventilation, and filtration, (5) germicidal ultraviolet irradiation, (6) aerosol test facilities, (7) process production of microorganisms, and…

  12. Microbiologically influenced corrosion in wastewater treatment plants

    SciTech Connect

    Soebbing, J.B.; Yolo, R.A.

    1996-09-01

    Microbiologically influenced corrosion (MIC) activity in wastewater treatment plans is discussed. Three case histories are presented showing throughwall pitting from MIC in recycle activated sludge process piping systems. Field and laboratory investigation activities are reported. Alternatives are reviewed for corrosion prevention and mitigation.

  13. Microbiology and Safety of Table Eggs

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This chapter describes the microbiology of table eggs, effects of processing, regulatory influences, relative risk of egg-borne disease, and the role of retail and consumer practices in outbreaks. Effects of washing, refrigeration, and facility sanitation in US commercial facilities will be describe...

  14. [Quality assessment program of the Spanish Society of Infectious Diseases and Clinical Microbiology. Analysis of results. 2005].

    PubMed

    Orta Mira, Nieves; Guna Serrano, M del Remedio; Pérez, José L; Gimeno Cardona, Concepción

    2006-10-01

    Quality assurance of the analytical processes performed at the clinical microbiology laboratory is mandatory and should be carried out by using external and internal quality control activities. External quality assessment programs allow intercomparison within laboratories, detection of errors, and evaluation of the suitability of some reagents or diagnostic kits for the purpose for which they were designed; these activities are also useful for continuous education. The program launched 15 years ago by the Spanish Society of Infectious Diseases and Clinical Microbiology is based on sending typified materials along with a clinical and microbiological case related to these control materials. The spectrum of the samples is broad, including bacteriology (monthly and three-monthly), serology, mycology, parasitology, mycobacteria, virology, and molecular microbiology. After receiving the results from the participants, the program organization delivers an individual certificate comparing the results with those of a reference laboratory. Additionally, a report is generated by analyzing all the results sent by the participants; laboratories are also sent review articles on the subject of each assessment as a tool for continuous education in clinical microbiology. In this article, the most relevant conclusions and lessons from the 2005 assessments are presented.

  15. NGL process and the role of International SEMATECH

    NASA Astrophysics Data System (ADS)

    Dao, Giang T.; Mackay, R. S.; Seidel, Philip K.

    2002-07-01

    International SEMATECH (ISMT) established a program in 1996 to narrow the Next Generation Lithography (NGL) options on the SIA Roadmap through a global consensus process. Methodologies developed by the SIA Lithography Technical Working Group (TWG) were adopted to ensure a balanced and objective assessment. Critical reviews with emphasis on technical program plans, solutions to critical issues (showstoppers), error budget analysis, cost-of-ownership, business plans, and schedules were implemented with the Technical Champions of each technology. White papers were written by the Technical Champion teams to better educate the participants in the annual worldwide NGL workshops. Participants made their recommendations through a survey conducted at the end of each workshop. A Task Force of the key stakeholders from global chip makers, equipment suppliers and consortia was commissioned to review the workshop output, assess the progress on the critical issues and make recommendations to ISMT on narrowing the options. As a result of this global consensus process and the critical issue projects, the NGL Task Force has made the following recommendations: (i) November 1997 - Massively Parallel Direct Write (MPDW) is not mature enough for introduction until at least the 50nm node. (ii) December 1998 - ISMT should narrow its support to two options EUVL and EPL, and that other worldwide activity on X-Ray and IPL continue. (iii) December 1999 - ISMT should continue its support for EUVL and EPL for the 70nm node, it also recognized the growing possibility that the industry might need more than one mainstream technology for the diverging application of DRAM/MPU and ASIC/SOC. (iv) September 2000 - The industry in general should narrow its support for commercialization to EUVL and EPL for insertion at the 70nm node. (v) August 2001 - The industry should continue to fund the commercialization of both EUVL and EPL. Today, the ISMT program for NGL is transitioning from option selection to

  16. 75 FR 19944 - International Code Council: The Update Process for the International Codes and Standards

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-16

    ... the International Green Construction Code which will become part of the family of 2012 International... proposals from interested individuals and organizations involved in the construction industry as well as the... standards as the basis for developing Federal regulations concerning new and existing construction. The...

  17. Membrane processing technology in the food industry: food processing, wastewater treatment, and effects on physical, microbiological, organoleptic, and nutritional properties of foods.

    PubMed

    Kotsanopoulos, Konstantinos V; Arvanitoyannis, Ioannis S

    2015-01-01

    Membrane processing technology (MPT) is increasingly used nowadays in a wide range of applications (demineralization, desalination, stabilization, separation, deacidification, reduction of microbial load, purification, etc.) in food industries. The most frequently applied techniques are electrodialysis (ED), reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF), and microfiltration (MF). Several membrane characteristics, such as pore size, flow properties, and the applied hydraulic pressure mainly determine membranes' potential uses. In this review paper the basic membrane techniques, their potential applications in a large number of fields and products towards the food industry, the main advantages and disadvantages of these methods, fouling phenomena as well as their effects on the organoleptic, qualitative, and nutritional value of foods are synoptically described. Some representative examples of traditional and modern membrane applications both in tabular and figural form are also provided.

  18. Trends in wine microbiology.

    PubMed

    Ramón, D

    1997-12-01

    During the last few years many winemakers have started to use pure Saccharomyces cerevisiae strains, frequently isolated from their own geographical regions, to produce wines of more reproductable quality. This microbiological simplification has opened the way for the genetic modification of wine yeast strains. This review concerns the application of molecular techniques in oenology, not only from the point of view of the construction of recombinant strains but also for the study of the population dynamics of wine fermentations.

  19. Microbiological analysis of cosmetics.

    PubMed

    Herrera, Anavella Gaitan

    2004-01-01

    Cosmetics are products of chemical or natural origin dedicated specifically for use in skin and mucosa. The constant development of the cosmetic industry has generated the necessity to carry out microbiological analysis on the raw materials used in the industrial production of cosmetics as well as the final products, with the purpose of obtaining products of good microbiological quality. Cosmetic products are recognized to be substrates for the survival and development of a large variety of microorganisms, since they possess some of the nutrients that facilitate growth such as: lipids, polysaccharides, alcohol, proteins, amino acids, glucosides, esteroids, peptides, and vitamins. Also, the conditions of readiness (oxygenation, pH, temperature, osmotic degree, superficial activity, perfume, and essential oils) present in the cosmetic products favor microbial multiplication. Routine analyses to determine the microbiological quality of a cosmetic product include the following: Count of mesophilic aerobic microorganisms. Most probable number (MPN) of total coliforms. Count of molds and yeasts. Absence/presence of Staphylococcus aureus probe. Absence/presence of Pseudomonas aeruginosa probe. PMID:15156038

  20. Microbiological analysis of cosmetics.

    PubMed

    Herrera, Anavella Gaitan

    2004-01-01

    Cosmetics are products of chemical or natural origin dedicated specifically for use in skin and mucosa. The constant development of the cosmetic industry has generated the necessity to carry out microbiological analysis on the raw materials used in the industrial production of cosmetics as well as the final products, with the purpose of obtaining products of good microbiological quality. Cosmetic products are recognized to be substrates for the survival and development of a large variety of microorganisms, since they possess some of the nutrients that facilitate growth such as: lipids, polysaccharides, alcohol, proteins, amino acids, glucosides, esteroids, peptides, and vitamins. Also, the conditions of readiness (oxygenation, pH, temperature, osmotic degree, superficial activity, perfume, and essential oils) present in the cosmetic products favor microbial multiplication. Routine analyses to determine the microbiological quality of a cosmetic product include the following: Count of mesophilic aerobic microorganisms. Most probable number (MPN) of total coliforms. Count of molds and yeasts. Absence/presence of Staphylococcus aureus probe. Absence/presence of Pseudomonas aeruginosa probe.

  1. Microbiologically influenced corrosion in wastewater treatment plants

    SciTech Connect

    Soebbing, J.B.; Yolo, R.A.

    1995-12-01

    Microbiologically influenced corrosion (MIC) activity in wastewater treatment plants is discussed. Three case histories are presented showing through-wall pitting from MIC in return activated sludge (RAS) process piping systems. Field and laboratory investigation activities are reported. Alternatives are reviewed for initial corrosion prevention and mitigation following identification. A brief discussion of wastewater treatment and specifically, the activated sludge process is also provided. The applicability of common MIC prevention and mitigation practices to wastewater treatment facilities or processes is also reviewed.

  2. [Predictive microbiology and risk assessment].

    PubMed

    Hildebrandt, G; Kleer, J

    2004-05-01

    Predictive microbiology (predictive modelling PM), in spite of its limits and short-comings, may often contribute to a reduction of the problems arising when HACCP systems are established or microbiological risk assessment is done. Having identified the agents which constitute a risk and the contamination rate and density in the raw material, the influences of production steps and storage on these microorganisms have to be examined. Finally, there should be an exposure assessment, i.e. an estimate of the contamination density in the final product at the time of consumption. Should the exposure assessment together with data from dose response assessments reveal a potential for intake of inacceptable numbers of organisms, the risk identified has to be characterized. As a consequence, risk management should result in a modification of the composition of the product and/or of the production process so that the risk does not surpass an acceptable limit. For this approach it is indispensable to have product- and process-specific information on the multiplication of pathogens prior to heat treatment, on reduction of their density by thermal treatment and on growth or dying of organisms having survived heat treatment or penetrated into the product after heat treatment as post-process contaminant. Commonly, challenge tests are conducted to provide such information. But they are time consuming and, as their results are only valid for the specific product tested and the conditions prevailing during the experiment, the have to be repeated if there is any modification of intrinsic or extrinsic factors. At least partially, the PM may replace the challenge tests. The efficiency of the models is rated particularly high if they are used already at the stage of product development when the question has to be answered whether a planned recipe or process of production are already save or have to be modified to become save. PMID:15233338

  3. 37 CFR 1.445 - International application filing, processing and search fees.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... filing, processing and search fees. 1.445 Section 1.445 Patents, Trademarks, and Copyrights UNITED STATES... International Processing Provisions Fees § 1.445 International application filing, processing and search fees... a small entity $400.00 (2) A search fee (see 35 U.S.C. 361(d) and PCT Rule 16): (i) For...

  4. 37 CFR 1.445 - International application filing, processing and search fees.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... filing, processing and search fees. 1.445 Section 1.445 Patents, Trademarks, and Copyrights UNITED STATES... International Processing Provisions Fees § 1.445 International application filing, processing and search fees...)) $200.00 By other than a small entity $400.00 (2) A search fee (see 35 U.S.C. 361(d) and PCT Rule 16)...

  5. 37 CFR 1.445 - International application filing, processing and search fees.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... filing, processing and search fees. 1.445 Section 1.445 Patents, Trademarks, and Copyrights UNITED STATES... International Processing Provisions Fees § 1.445 International application filing, processing and search fees....00 (2) A search fee (see 35 U.S.C. 361(d) and PCT Rule 16) $2,080.00 (3) A supplemental search...

  6. 37 CFR 1.445 - International application filing, processing and search fees.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... filing, processing and search fees. 1.445 Section 1.445 Patents, Trademarks, and Copyrights UNITED STATES... International Processing Provisions Fees § 1.445 International application filing, processing and search fees....00 (2) A search fee (see 35 U.S.C. 361(d) and PCT Rule 16) $2,080.00 (3) A supplemental search...

  7. 37 CFR 1.445 - International application filing, processing and search fees.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... filing, processing and search fees. 1.445 Section 1.445 Patents, Trademarks, and Copyrights UNITED STATES... International Processing Provisions Fees § 1.445 International application filing, processing and search fees... a small entity $400.00 (2) A search fee (see 35 U.S.C. 361(d) and PCT Rule 16): (i) For...

  8. The International Tethered Cord Partnership: Beginnings, process, and status

    PubMed Central

    Mulholland, Celene B.; Aranda, Guzmán; Arredondo, Luis Angel; Calgua, Erwin; Contreras, Fernando; Espinoza, Dulce Maria; Gonzalez, Juan Bosco; Hoil, Jose A.; Komolafe, Edward; Lazareff, Jorge A.; Liu, Yunhui; Soto-Mancilla, Juan Luis; Mannucci, Graciela; Nan, Bao; Portillo, Santiago; Zhao, Hongyu

    2011-01-01

    Background: Spina bifida presents a significant cause of childhood morbidity in lower- and middle-income nations. Unfortunately, there is a paucity of literature examining outcomes among children with spina bifida in these countries. The goal of the International Tethered Cord Parternship is twofold: (1) to establish an international surveillance database to examine the correlation between time of repair and clinical outcomes in children with spina bifida and tethered cord; and (2) to foster collaboration among international institutions around pediatric neurosurgical concerns. Methods: Twelve institutions in 7 countries committed to participating in the International Tethered Cord Partnership. A neurosurgeon at each institution will evaluate all children presenting with spina bifida and/or tethered cord using the survey instrument after appropriate consent is obtained. The instrument was developed collaboratively and based on previous measures of motor and sensory function, ambulation, and continence. All institutions who have begun collecting data received appropriate Institutional Review Board approval. All data will be entered into a Health Insurance Portability and Accountability Act (HIPAA) compliant database. In addition, a participant restricted internet forum was created to foster communication and includes non–project-specific communications, such as case and journal article discussion. Results: From October 2010 to December 2010, 82 patients were entered from the various study sites. Conclusion: To our knowledge this is the first international pediatric neurosurgical database focused on clinical outcomes and predictors of disease progression. The collaborative nature of the project will not only increase knowledge of spina bifida and tethered cord, but also foster discussion and further collaboration between neurosurgeons internationally. PMID:21541204

  9. Microbiological profile of selected mucks

    NASA Astrophysics Data System (ADS)

    Dąbek-Szreniawska, M.; Wyczółkowski, A. I.

    2009-04-01

    INTRODUCTION Matyka-Sarzynska and Sokolowska (2000) emphasize that peats and peat soils comprise large areas of Poland. The creation of soil begins when the formation of swamp has ended. Gawlik (2000) states that the degree of influence of the mucky process of organic soils on the differentiations of the conditions of growth and development of plants is mainly connected with the changes of moisture-retentive properties of mucks which constitute the material for these soils, and the loss of their wetting capacities. The above-mentioned changes, which usually occur gradually and show a clear connection with the extent of dehydration and, at times, with its duration, intensify significantly when the soils are under cultivation. The mucky process of peat soils leads to transformations of their physical, chemical and biological properties. The main ingredient of peat soils is organic substance. The substance is maintained inside them by the protective activity of water. The process of land improvement reduces the humidity of the environment, and that Intensifies the pace of the activity of soil microorganisms which cause the decay of organic substance. The decay takes place in the direction of two parallel processes: mineralization and humification. All groups of chemical substances constituting peat undergo mineralization. Special attention should be called to the mineralization of carbon and nitrogen compounds, which constitute a large percentage of theorganic substance of the peat organic mass. Okruszko (1976) has examined scientificbases of the classification of peat soils depending on the intensity of the muck process. The aim of this publication was to conduct a microbiological characteristic of selected mucky material. METHODS AND MATERIALS Soil samples used in the experiments were acquired from the Leczynsko-Wlodawski Lake Region, a large area of which constitutes a part of the Poleski National Park, which is covered to a large extent with high peat bogs. It was

  10. NASA's Accident Precursor Analysis Process and the International Space Station

    NASA Technical Reports Server (NTRS)

    Groen, Frank; Lutomski, Michael

    2010-01-01

    This viewgraph presentation reviews the implementation of Accident Precursor Analysis (APA), as well as the evaluation of In-Flight Investigations (IFI) and Problem Reporting and Corrective Action (PRACA) data for the identification of unrecognized accident potentials on the International Space Station.

  11. 8 CFR 287.10 - Expedited internal review process.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... conferred upon the Federal Bureau of Investigation, the United States Attorneys, the Criminal Division or... to employees of the former INS, persons may contact the Office of Internal Audit, Bureau of... of the Department, the allegation or complaint shall be referred promptly for investigation...

  12. 8 CFR 287.10 - Expedited internal review process.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... conferred upon the Federal Bureau of Investigation, the United States Attorneys, the Criminal Division or... to employees of the former INS, persons may contact the Office of Internal Audit, Bureau of... of the Department, the allegation or complaint shall be referred promptly for investigation...

  13. Careers in Microbiology...Horizons Unlimited

    ERIC Educational Resources Information Center

    Goldschmidt Millicent C.; Whitt, Dixie

    1978-01-01

    A broad range of present microbiological work is discussed in order to indicate the many possible careers now open in microbiology. Some areas are immunology, environmental microbiology, agricultural, industrial, and food microbiology, and space microbiology. An employment outlook is also given. (MDR)

  14. The case for biocentric microbiology

    PubMed Central

    Aziz, Ramy Karam

    2009-01-01

    Microbiology is a relatively modern scientific discipline intended to objectively study microorganisms, including pathogens and nonpathogens. However, since its birth, this science has been negatively affected by anthropocentric convictions, including rational and irrational beliefs. Among these, for example, is the artificial separation between environmental and medical microbiology that weakens both disciplines. Anthropocentric microbiology also fails to properly answer questions concerning the evolution of microbial pathogenesis. Here, I argue that an exclusively biocentric microbiology is imperative for improving our understanding not only of the microbial world, but also of our own species, our guts, and the world around us. PMID:19653908

  15. Microbiology operations and facilities aboard restructured Space Station Freedom

    NASA Technical Reports Server (NTRS)

    Cioletti, Louis A.; Mishra, S. K.; Pierson, Duane L.

    1992-01-01

    With the restructure and funding changes for Space Station Freedom, the Environmental Health System (EHS)/Microbiology Subsystem revised its scheduling and operational requirements for component hardware. The function of the Microbiology Subsystem is to monitor the environmental quality of air, water, and internal surfaces and, in part, crew health on board Space Station. Its critical role shall be the identification of microbial contaminants in the environment that may cause system degradation, produce unsanitary or pathogenic conditions, or reduce crew and mission effectiveness. EHS/Microbiology operations and equipment shall be introduced in concert with a phased assembly sequence, from Man Tended Capability (MTC) through Permanently Manned Capability (PMC). Effective Microbiology operations and subsystem components will assure a safe, habitable, and useful spacecraft environment for life sciences research and long-term manned exploration.

  16. Microbiological monitoring in geothermal plants

    NASA Astrophysics Data System (ADS)

    Alawi, M.; Lerm, S.; Vetter, A.; Vieth, A.; Seibt, A.; Wolfgramm, M.; Würdemann, H.

    2009-12-01

    In times of increasing relevance of alternative energy resources the utilization of geothermal energy and subsurface energy storage gains importance and arouses increasing interest of scientists. The research project “AquiScreen” investigates the operational reliability of geothermally used groundwater systems under microbial, geochemical, mineralogical and petrological aspects. Microbiological analyses based on fluid and solid phases of geothermal systems are conducted to evaluate the impact of microbial populations on these systems. The presentation focuses on first results obtained from microbiological monitoring of geothermal plants located in two different regions of Germany: the North German Basin and the Molasse Basin in the southern part characterized by different salinities and temperatures. Fluid and filter samples taken during regular plant operation were investigated using genetic fingerprinting based on PCR-amplified 16S rRNA genes to characterize the microbial biocenosis of the geothermal aquifer. Sequencing of dominant bands of the fingerprints and the subsequent comparison to 16S rRNA genes from public databases enables a correlation to metabolic classes and provides information about the biochemical processes in the deep biosphere. The genetic profiles revealed significant differences in microbiological community structures of geothermal aquifers investigated. Phylogenetic analyses indicate broad metabolical diversity adapted to the specific conditions in the aquifers. Additionally a high amount of so far uncultivated microorganisms was detected indicating very specific indigenous biocenosis. However, in all geothermal plants bacteria were detected despite of fluid temperatures from 45° to 120°C. The identified microorganisms are closely related to thermophilic and hyperthermophilic species detectable in hot wells and hot springs, like Thermus scotoductus and Thermodesulfovibrio yellowstonii, respectively. Halophilic species were detected in

  17. Microbiological Quantitative Risk Assessment

    NASA Astrophysics Data System (ADS)

    Dominguez, Silvia; Schaffner, Donald W.

    The meat and poultry industry faces ongoing challenges due to the natural association of pathogens of concern (e.g., Salmonella, Campylobacter jejuni, Escherichia coli O157:H7) with a variety of domesticated food animals. In addition, pathogens such as Listeria monocytogenes pose a significant cross-contamination risk during further meat and poultry processing, distribution, and storage. Furthermore, the meat and poultry industries are constantly changing with the addition of new products, use of new raw materials, and targeting of new consumer populations, each of which may give rise to potential new risks. National and international regulations are increasingly using a “risk-based” approach to food safety (where the regulatory focus is driven by the magnitude of the risk), so risk assessment is becoming a valuable tool to systematically organize and evaluate the potential public health risk posed by food processing operations.

  18. The microbiological composition of airliner cabin air.

    PubMed

    Wick, R L; Irvine, L A

    1995-03-01

    Hundreds of millions of passengers travel on U.S. airliners annually. These large numbers, together with the close proximity required onboard, raise a concern about microbiologic disease transmission in cabin air. Previous air quality surveys generally concentrated on environmental tobacco smoke and particulate matter. They largely ignored the microorganisms also present. We sampled the microbiologic climate of 45 domestic and international flights. We also sampled common locations in a major southwestern city. The concentration of microorganisms in airline cabin air is much lower than in ordinary city locations. We conclude that the small number of microorganisms found in U.S. airliner cabin environments does not contribute to the risk of disease transmission among passengers.

  19. Microbiological Quality and Food Safety of Plants Grown on ISS Project

    NASA Technical Reports Server (NTRS)

    Wheeler, Raymond M. (Compiler)

    2014-01-01

    The goal of this project is to select and advance methods to enable real-time sampling, microbiological analysis, and sanitation of crops grown on the International Space Station (ISS). These methods would validate the microbiological quality of crops grown for consumption to ensure safe and palatable fresh foods. This would be achieved through the development / advancement of microbiological sample collection, rapid pathogen detection and effective sanitation methods that are compatible with a microgravity environment.

  20. Microbiological quality of saffron from the main producer countries.

    PubMed

    Cosano, Inmaculada; Pintado, Concepción; Acevedo, Olga; Novella, José Luis; Alonso, Gonzalo Luis; Carmona, Manuel; de la Rosa, Carmen; Rotger, Rafael

    2009-10-01

    A microbiological study of saffron spice was undertaken in the context of a European research project (Methodologies for Implementing International Standards for Saffron Purity and Quality, the acronym for which is SAFFIC), analyzing 79 samples obtained from the main producer countries, namely Greece, Iran, Italy, Morocco, and Spain. Current microbiological quality criteria are the same as for other spices, but saffron is added in minute quantities during the cooking process, so the health risk associated with microbial contamination might be lower. We did not detect Salmonella either by culture or by PCR methods in any sample, and Escherichia coli was only found in five samples. Enterobacteriaceae were frequently found (70.9% of the samples), but most of them belonged to species of probable environmental origin. Aerobic sporulated bacteria were also common, but only three samples contained Bacillus cereus at low levels (<200 CFU g(-1)). Clostridium perfringens counts were also very low, with only one sample reaching >100 CFU g(-1), an acceptable value. Overall, microbial contamination in saffron was markedly lower than it was in other spices.

  1. Critical periods for the neurodevelopmental processes of externalizing and internalizing.

    PubMed

    Tucker, Don M; Poulsen, Catherine; Luu, Phan

    2015-05-01

    Research on neurobiological development is providing insight into the nature and mechanisms of human neural plasticity. These mechanisms appear to support two different forms of developmental learning. One form of learning could be described as externalizing, in which neural representations are highly responsive to environmental influences, as the child typically operates under a mode of hedonic approach. A second form of learning supports internalizing, in which motive control separates attention and self-regulation from the immediate influences of the context, particularly when the child faces conditions of avoidance and threat. The dorsal cortical networks of externalizing are organized around dorsal limbic (cingulate, septal, lateral hypothalamic, hippocampal, and ventral striatal) circuits. In contrast, the ventral cortical networks of internalizing are organized around ventral limbic (anterior temporal and orbital cortex, extended amygdala, dorsal striatal, and mediodorsal thalamic) circuits. These dual divisions of the limbic system in turn self-regulate their arousal levels through different brain stem and forebrain neuromodulator projection systems, with dorsal corticolimbic networks regulated strongly by locus coeruleus norepinephrine and brain stem raphe nucleus serotonin projection systems, and ventral corticolimbic networks regulated by ventral tegmental dopamine and forebrain acetylcholine projections. Because the arousal control systems appear to regulate specific properties of neural plasticity in development, an analysis of these systems explains differences between externalizing and internalizing at multiple levels of neural and psychological self-regulation. In neuroscience, the concept of critical periods has been applied to times when experience is essential for the maturation of sensory systems. In a more general neuropsychological analysis, certain periods of the child's development require successful self-regulation through the differential

  2. Internal stabilization of polycarbonate resins by two stage radiation process

    NASA Technical Reports Server (NTRS)

    Gupta, Amitava (Inventor); Liang, Ranty H. (Inventor); Yavrouian, Andre H. (Inventor)

    1988-01-01

    A new polycarbonate copolymer resin is formed by internal generation of stabilizers bound to the polymer chain. Irradiation of a solid piece or a deoxygenated solution of the resin at a first frequency below 300 nm generates 2 to 8 mol percent of phenyl salicylate groups which are rearranged to dihydroxybenzophenone groups by irradiating the resin under oxygen excluding conditions at a second frequency from 300 to 320 nm.

  3. Rapid microbiology - raising awareness.

    PubMed

    Bailie, Jonathan

    2016-01-01

    A 'high-level overview' of some of the emerging rapid microbiology technologies designed to help healthcare engineering and infection control teams working in hospitals and other healthcare facilities more rapidly identify potentially hazardous levels of waterborne microorganisms in their water systems, enabling them to take prompt remedial action, and a look at the some of the 'pros and cons' of such testing techniques, was given by Nalco technical director, Howard Barnes, the vice-chair of the Legionella Control Association (LCA), at a recent LCA open day. HEJ editor, Jonathan Bailie, reports.

  4. Quality in the molecular microbiology laboratory.

    PubMed

    Wallace, Paul S; MacKay, William G

    2013-01-01

    In the clinical microbiology laboratory advances in nucleic acid detection, quantification, and sequence analysis have led to considerable improvements in the diagnosis, management, and monitoring of infectious diseases. Molecular diagnostic methods are routinely used to make clinical decisions based on when and how to treat a patient as well as monitor the effectiveness of a therapeutic regime and identify any potential drug resistant strains that may impact on the long term patient treatment program. Therefore, confidence in the reliability of the result provided by the laboratory service to the clinician is essential for patient treatment. Hence, suitable quality assurance and quality control measures are important to ensure that the laboratory methods and service meet the necessary regulatory requirements both at the national and international level. In essence, the modern clinical microbiology laboratory ensures the appropriateness of its services through a quality management system that monitors all aspects of the laboratory service pre- and post-analytical-from patient sample receipt to reporting of results, from checking and upholding staff competency within the laboratory to identifying areas for quality improvements within the service offered. For most European based clinical microbiology laboratories this means following the common International Standard Organization (ISO9001) framework and ISO15189 which sets out the quality management requirements for the medical laboratory (BS EN ISO 15189 (2003) Medical laboratories-particular requirements for quality and competence. British Standards Institute, Bristol, UK). In the United States clinical laboratories performing human diagnostic tests are regulated by the Centers for Medicare and Medicaid Services (CMS) following the requirements within the Clinical Laboratory Improvement Amendments document 1988 (CLIA-88). This chapter focuses on the key quality assurance and quality control requirements within the

  5. [Validation and verfication of microbiology methods].

    PubMed

    Camaró-Sala, María Luisa; Martínez-García, Rosana; Olmos-Martínez, Piedad; Catalá-Cuenca, Vicente; Ocete-Mochón, María Dolores; Gimeno-Cardona, Concepción

    2015-01-01

    Clinical microbiologists should ensure, to the maximum level allowed by the scientific and technical development, the reliability of the results. This implies that, in addition to meeting the technical criteria to ensure their validity, they must be performed with a number of conditions that allows comparable results to be obtained, regardless of the laboratory that performs the test. In this sense, the use of recognized and accepted reference methodsis the most effective tool for these guarantees. The activities related to verification and validation of analytical methods has become very important, as there is continuous development, as well as updating techniques and increasingly complex analytical equipment, and an interest of professionals to ensure quality processes and results. The definitions of validation and verification are described, along with the different types of validation/verification, and the types of methods, and the level of validation necessary depending on the degree of standardization. The situations in which validation/verification is mandatory and/or recommended is discussed, including those particularly related to validation in Microbiology. It stresses the importance of promoting the use of reference strains as controls in Microbiology and the use of standard controls, as well as the importance of participation in External Quality Assessment programs to demonstrate technical competence. The emphasis is on how to calculate some of the parameters required for validation/verification, such as the accuracy and precision. The development of these concepts can be found in the microbiological process SEIMC number 48: «Validation and verification of microbiological methods» www.seimc.org/protocols/microbiology.

  6. [Validation and verfication of microbiology methods].

    PubMed

    Camaró-Sala, María Luisa; Martínez-García, Rosana; Olmos-Martínez, Piedad; Catalá-Cuenca, Vicente; Ocete-Mochón, María Dolores; Gimeno-Cardona, Concepción

    2015-01-01

    Clinical microbiologists should ensure, to the maximum level allowed by the scientific and technical development, the reliability of the results. This implies that, in addition to meeting the technical criteria to ensure their validity, they must be performed with a number of conditions that allows comparable results to be obtained, regardless of the laboratory that performs the test. In this sense, the use of recognized and accepted reference methodsis the most effective tool for these guarantees. The activities related to verification and validation of analytical methods has become very important, as there is continuous development, as well as updating techniques and increasingly complex analytical equipment, and an interest of professionals to ensure quality processes and results. The definitions of validation and verification are described, along with the different types of validation/verification, and the types of methods, and the level of validation necessary depending on the degree of standardization. The situations in which validation/verification is mandatory and/or recommended is discussed, including those particularly related to validation in Microbiology. It stresses the importance of promoting the use of reference strains as controls in Microbiology and the use of standard controls, as well as the importance of participation in External Quality Assessment programs to demonstrate technical competence. The emphasis is on how to calculate some of the parameters required for validation/verification, such as the accuracy and precision. The development of these concepts can be found in the microbiological process SEIMC number 48: «Validation and verification of microbiological methods» www.seimc.org/protocols/microbiology. PMID:24958671

  7. 49 CFR 520.24 - Internal processing of draft environmental impact statements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ENVIRONMENTAL IMPACTS Procedures § 520.24 Internal processing of draft environmental impact statements. Before... 49 Transportation 6 2014-10-01 2014-10-01 false Internal processing of draft environmental impact statements. 520.24 Section 520.24 Transportation Other Regulations Relating to Transportation...

  8. 49 CFR 520.24 - Internal processing of draft environmental impact statements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ENVIRONMENTAL IMPACTS Procedures § 520.24 Internal processing of draft environmental impact statements. Before... 49 Transportation 6 2012-10-01 2012-10-01 false Internal processing of draft environmental impact statements. 520.24 Section 520.24 Transportation Other Regulations Relating to Transportation...

  9. 49 CFR 520.24 - Internal processing of draft environmental impact statements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ENVIRONMENTAL IMPACTS Procedures § 520.24 Internal processing of draft environmental impact statements. Before... 49 Transportation 6 2010-10-01 2010-10-01 false Internal processing of draft environmental impact statements. 520.24 Section 520.24 Transportation Other Regulations Relating to Transportation...

  10. 49 CFR 520.24 - Internal processing of draft environmental impact statements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ENVIRONMENTAL IMPACTS Procedures § 520.24 Internal processing of draft environmental impact statements. Before... 49 Transportation 6 2013-10-01 2013-10-01 false Internal processing of draft environmental impact statements. 520.24 Section 520.24 Transportation Other Regulations Relating to Transportation...

  11. Evolution of microbiological analytical methods for dairy industry needs

    PubMed Central

    Sohier, Danièle; Pavan, Sonia; Riou, Armelle; Combrisson, Jérôme; Postollec, Florence

    2014-01-01

    Traditionally, culture-based methods have been used to enumerate microbial populations in dairy products. Recent developments in molecular methods now enable faster and more sensitive analyses than classical microbiology procedures. These molecular tools allow a detailed characterization of cell physiological states and bacterial fitness and thus, offer new perspectives to integration of microbial physiology monitoring to improve industrial processes. This review summarizes the methods described to enumerate and characterize physiological states of technological microbiota in dairy products, and discusses the current deficiencies in relation to the industry’s needs. Recent studies show that Polymerase chain reaction-based methods can successfully be applied to quantify fermenting microbes and probiotics in dairy products. Flow cytometry and omics technologies also show interesting analytical potentialities. However, they still suffer from a lack of validation and standardization for quality control analyses, as reflected by the absence of performance studies and official international standards. PMID:24570675

  12. Evolution of microbiological analytical methods for dairy industry needs.

    PubMed

    Sohier, Danièle; Pavan, Sonia; Riou, Armelle; Combrisson, Jérôme; Postollec, Florence

    2014-01-01

    Traditionally, culture-based methods have been used to enumerate microbial populations in dairy products. Recent developments in molecular methods now enable faster and more sensitive analyses than classical microbiology procedures. These molecular tools allow a detailed characterization of cell physiological states and bacterial fitness and thus, offer new perspectives to integration of microbial physiology monitoring to improve industrial processes. This review summarizes the methods described to enumerate and characterize physiological states of technological microbiota in dairy products, and discusses the current deficiencies in relation to the industry's needs. Recent studies show that Polymerase chain reaction-based methods can successfully be applied to quantify fermenting microbes and probiotics in dairy products. Flow cytometry and omics technologies also show interesting analytical potentialities. However, they still suffer from a lack of validation and standardization for quality control analyses, as reflected by the absence of performance studies and official international standards.

  13. Benchmarking processes for managing large international space programs

    NASA Technical Reports Server (NTRS)

    Mandell, Humboldt C., Jr.; Duke, Michael B.

    1993-01-01

    The relationship between management style and program costs is analyzed to determine the feasibility of financing large international space missions. The incorporation of management systems is considered to be essential to realizing low cost spacecraft and planetary surface systems. Several companies ranging from large Lockheed 'Skunk Works' to small companies including Space Industries, Inc., Rocket Research Corp., and Orbital Sciences Corp. were studied. It is concluded that to lower the prices, the ways in which spacecraft and hardware are developed must be changed. Benchmarking of successful low cost space programs has revealed a number of prescriptive rules for low cost managements, including major changes in the relationships between the public and private sectors.

  14. Rein and Zheng Elected to American Academy of Microbiology | Poster

    Cancer.gov

    By Nancy Parrish, Staff Writer Earlier this year, Alan Rein, Ph.D., and Zhi-Ming (Thomas) Zheng, M.D., Ph.D., were elected to fellowship in the American Academy of Microbiology, the honorific leadership group within the American Society for Microbiology (ASM). They were among 88 microbiologists who were elected to the academy “through a highly selective, peer-review process, based on their records of scientific achievement and original contributions that have advanced microbiology,” according to the society’s website.

  15. The Danish Microbiology Database (MiBa) 2010 to 2013.

    PubMed

    Voldstedlund, M; Haarh, M; Mølbak, K

    2014-01-09

    The Danish Microbiology Database (MiBa) is a national database that receives copies of reports from all Danish departments of clinical microbiology. The database was launched in order to provide healthcare personnel with nationwide access to microbiology reports and to enable real-time surveillance of communicable diseases and microorganisms. The establishment and management of MiBa has been a collaborative process among stakeholders, and the present paper summarises lessons learned from this nationwide endeavour which may be relevant to similar projects in the rapidly changing landscape of health informatics.

  16. Microbiology of chronic rhinosinusitis.

    PubMed

    Brook, I

    2016-07-01

    Most sinus infections are viral and only a small percentage develop bacterial infection. Rhino-, influenza, and para-influenza viruses are the most frequent viral causes of sinusitis. The most common bacterial isolates from children and adult patients with community-acquired acute bacterial sinusitis are Streptococcus pneumoniae, Haemophilus influenzae, Moraxella catarrhalis, and Streptococcus pyogenes. Staphylococcus aureus and anaerobic organisms (Prevotella and Porphyromonas, Fusobacterium, and Peptostreptococcus spp.) are the commonest isolates in chronic rhinosinusitis (CRS). Aerobic and anaerobic beta lactamase-producing bacteria (BLPB) were recovered from over a third of these patients. Methicillin-resistant S. aureus (MRSA) accounted for over 60 % of S. aureus isolates. Pseudomonas aeruginosa and other aerobic and facultative Gram-negative rods are frequently recovered in nosocomial sinusitis, the immunocompromised host, individuals with human immunodeficiency virus infection, and in cystic fibrosis. The CRS infection evolves the formation of a biofilm that might play a significant role in the pathogenesis and persistence of CRS. The microbiology of sinusitis is influenced by previous antimicrobial therapy, vaccinations, and the presence of normal flora capable of interfering with the growth of pathogens. Recognition of the unique microbiology of CRS and their antimicrobial susceptibility is of great importance when selecting antimicrobial therapy. PMID:27086363

  17. [Microbiological diagnosis of tuberculosis].

    PubMed

    Allerberger, F; Fille, M; Streif, W; Luef, G; Schmutzhard, E; Dierich, M P

    1994-01-01

    The increased incidence of tuberculosis as well as the availability of new diagnostic testing methods clearly have various implications for the routine microbiology laboratory: samples must be sent to the microbiology lab for testing immediately after being taken and microscopically investigated the same day. In other countries, difficult to treat, multi-resistant Mycobacterium tuberculosis strains have occurred. Thus decisive hygienic measures must be taken early on in cases of highly infectious patients (i.e. patients with microscopically positive sputum). Liquid media (MB Check Roche, Bactec) as well as Löwenstein Jensen media must be inoculated in the lab. Liquid media allow both faster detection of certain atypical mycobacteria and increased accuracy. Classification of culturally established agents through commercial genetic probes (AccuProbe Mycobacterien) or with high pressure liquid chromatography is possible within hours when acid-fast rods are present. Time consuming identification by determination of biochemical and culture morphological characteristics should be reserved for reference labs. Today, rapid tests like analysis of tuberculostearic acid or polymerase chain reaction are already useful for special questions like ruling out tuberculous meningitis. In most cases, however, these rapid tests cannot replace identification of microbes with culture techniques. PMID:7941601

  18. Evolution across the Curriculum: Microbiology.

    PubMed

    Burmeister, Alita R; Smith, James J

    2016-05-01

    An integrated understanding of microbiology and evolutionary biology is essential for students pursuing careers in microbiology and healthcare fields. In this Perspective, we discuss the usefulness of evolutionary concepts and an overall evolutionary framework for students enrolled in microbiology courses. Further, we propose a set of learning goals for students studying microbial evolution concepts. We then describe some barriers to microbial evolution teaching and learning and encourage the continued incorporation of evidence-based teaching practices into microbiology courses at all levels. Next, we review the current status of microbial evolution assessment tools and describe some education resources available for teaching microbial evolution. Successful microbial evolution education will require that evolution be taught across the undergraduate biology curriculum, with a continued focus on applications and applied careers, while aligning with national biology education reform initiatives. Journal of Microbiology & Biology Education. PMID:27158306

  19. Evolution across the Curriculum: Microbiology

    PubMed Central

    Burmeister, Alita R.; Smith, James J.

    2016-01-01

    An integrated understanding of microbiology and evolutionary biology is essential for students pursuing careers in microbiology and healthcare fields. In this Perspective, we discuss the usefulness of evolutionary concepts and an overall evolutionary framework for students enrolled in microbiology courses. Further, we propose a set of learning goals for students studying microbial evolution concepts. We then describe some barriers to microbial evolution teaching and learning and encourage the continued incorporation of evidence-based teaching practices into microbiology courses at all levels. Next, we review the current status of microbial evolution assessment tools and describe some education resources available for teaching microbial evolution. Successful microbial evolution education will require that evolution be taught across the undergraduate biology curriculum, with a continued focus on applications and applied careers, while aligning with national biology education reform initiatives. Journal of Microbiology & Biology Education PMID:27158306

  20. Evolution across the Curriculum: Microbiology.

    PubMed

    Burmeister, Alita R; Smith, James J

    2016-05-01

    An integrated understanding of microbiology and evolutionary biology is essential for students pursuing careers in microbiology and healthcare fields. In this Perspective, we discuss the usefulness of evolutionary concepts and an overall evolutionary framework for students enrolled in microbiology courses. Further, we propose a set of learning goals for students studying microbial evolution concepts. We then describe some barriers to microbial evolution teaching and learning and encourage the continued incorporation of evidence-based teaching practices into microbiology courses at all levels. Next, we review the current status of microbial evolution assessment tools and describe some education resources available for teaching microbial evolution. Successful microbial evolution education will require that evolution be taught across the undergraduate biology curriculum, with a continued focus on applications and applied careers, while aligning with national biology education reform initiatives. Journal of Microbiology & Biology Education.

  1. International Space Station Noise Constraints Flight Rule Process

    NASA Technical Reports Server (NTRS)

    Limardo, Jose G.; Allen, Christopher S.; Danielson, Richard W.

    2014-01-01

    Crewmembers onboard the International Space Station (ISS) live in a unique workplace environment for as long as 6 -12 months. During these long-duration ISS missions, noise exposures from onboard equipment are posing concerns for human factors and crewmember health risks, such as possible reductions in hearing sensitivity, disruptions of crew sleep, interference with speech intelligibility and voice communications, interference with crew task performance, and reduced alarm audibility. The purpose of this poster is to describe how a recently-updated noise constraints flight rule is being used to implement a NASA-created Noise Exposure Estimation Tool and Noise Hazard Inventory to predict crew noise exposures and recommend when hearing protection devices are needed.

  2. Structuring Free-text Microbiology Culture Reports For Secondary Use

    PubMed Central

    Yim, Wen-wai; Evans, Heather L.; Yetisgen, Meliha

    2015-01-01

    Microbiology lab culture reports are a frequently used diagnostic tool for clinical providers. However, their incorporation into clinical surveillance applications and evidence-based medicine can be severely hindered by the free-text nature of these reports. In this work, we (1) created a microbiology culture template to structure free-text microbiology reports, (2) generated an annotated microbiology report corpus, and (3) built a microbiology information extraction system. Specifically, we combined rule-based, hybrid, and statistical techniques to extract microbiology entities and fill templates for structuring data. System performances were favorable, with entity f1-score 0.889 and relation f1-score 0.795. We plan to incorporate these extractions as features for our ongoing ventilator-associated pneumonia surveillance project, though this tool can be used as an upstream process in other applications. Our newly created corpus includes 1442 unique gram stain and culture microbiology reports generated from a cohort of 715 patients at the University of Washington Medical Facilities. PMID:26306288

  3. Interviewing International Students to Understand the Process of Expatriate Acculturation

    ERIC Educational Resources Information Center

    Peterson, Mark

    2014-01-01

    Globalization is the most influential trend of the early twenty-first century. However, many students have had limited direct contact with cultures other than their own. The following teaching innovation targets such students to give them an experiential learning opportunity about the process of acculturation for expatriates. This is accomplished…

  4. External Influences on an Internal Process: Supporting Preservice Teacher Research

    ERIC Educational Resources Information Center

    Schulte, Ann; Klipfel, Lyndsay Halpin

    2016-01-01

    In an effort to better understand how participating in teacher research as a student teacher compares to conducting it as a practicing teacher, a teacher educator and her former teacher education student engaged in a collaborative dialogue. They focus their reflections in this article on the impact of external forces on the process of teacher…

  5. Global Impacts of the Bologna Process: International Perspectives, Local Particularities

    ERIC Educational Resources Information Center

    Zmas, Aristotelis

    2015-01-01

    The paper examines the transfer of the Bologna Process (BP) outside Europe, focusing on its "external dimension" and dynamics in global settings. It argues that the BP impacts on the internationalisation activities of universities, especially with regard to cross-border transparency of qualifications, transnational improvement of quality…

  6. Effect of storage process on the sugars, polyphenols, color and microbiological changes in cracked Manzanilla-Aloreña table olives.

    PubMed

    Arroyo-López, F N; Duran-Quintana, M C; Romero, C; Rodríguez-Gómez, F; Garrido-Fernandez, A

    2007-09-01

    The green cracked "seasoned" Manzanilla-Aloreña table olive is a specialty with a high demand when prepared from fresh fruits; however, when stored fruits are used, the product loses its green color, presents a brownish tone, and loses demand. Different alternative storage systems for preventing such changes and preserving the freshness of the fruits were studied, and their effects on sugar, polyphenol, color, and microbiological changes were analyzed. The application of two washing waters in the presence of different compounds before brining markedly decreased the sugar and polyphenol contents in the flesh, without negatively influencing the color; it also caused the inhibition of yeasts and lactic acid bacteria (except in treatments using sodium metabisulfite and saturated carbon dioxide (CO(2)) in the storage olive brines. Salicylic acid inhibited microbial growth during washings and storage. The best long-term color was achieved in the presence of sodium metabisulfite. A combination of two washing waters (containing 5% sodium chloride (NaCl) and 0.1% sodium metabisulfite or saturated CO(2)), followed by immersion of the fruits in 15% NaCl brine with 0.1% sodium metabisulfite or brine under saturated CO(2) added, led to the best storage conditions. PMID:17663565

  7. Microbiological safety of water.

    PubMed

    Dawson, D J; Sartory, D P

    2000-01-01

    Significant advances in water treatment over the last century have resulted in massive improvements in the microbiological safety of public drinking water supplies in the UK and the developed countries. Incidences of illness due to poor treatment or post-treatment contamination are rare, but when they occur tend to attract considerable media attention. A well managed water treatment works and supply system can provide high quality drinking water wherever in the world it is located. As a rule, throughout the world, private supplies tend to be of a poorer quality than public supplies, but poorly managed public supplies have the potential to make a large number of people ill and continued effort is needed to maintain and improve drinking water quality world-wide.

  8. New microbiological features.

    PubMed

    Lee, A

    1995-04-01

    Recent developments in the microbiology of Helicobacter pylori have aimed to improve our understanding of the organism in order to define better methods of diagnosis and cure, and to explore possible methods of prevention. Investigations of the basic biochemistry of the bacterium have revealed many interesting physiological anomalies including characteristics of a eukaryotic parasite rather than a bacterium. The latest in a growing list of adhesins to be identified shows specificity for the Lewis b antigen, possibly providing an explanation for the postulated link between blood group and peptic ulceration. However, there are many contradictory features in the H. pylori adhesin story in urgent need of resolution. The search for the ulcerogenic strain has revealed only one possible candidate to date, the cagA phenotype, which appears to be inflammatory. Recently, the cloning frenzy has resulted in the sequencing of a multitude of putative virulence factors, the challenge now is to prove their importance in relevant animal models. PMID:7600134

  9. Treatment bed microbiological control

    NASA Technical Reports Server (NTRS)

    Janauer, Gilbert E.; Fitzpatrick, Timothy W.; Kril, Michael B.; Wilber, Georgia A.; Sauer, Richard L.

    1987-01-01

    The effects of microbial fouling on treatment bed (TB) performance are being studied. Fouling of activated carbon (AC) and ion exchange resins (IEX) by live and devitalized bacteria can cause decreased capacity for selected sorbates with AC and IEX TB. More data are needed on organic species removal in the trace region of solute sorption isotherms. TB colonization was prevented by nonclassical chemical disinfectant compositions (quaternary ammonium resins) applied in suitable configurations. Recently, the protection of carbon beds via direct disinfectant impregnation has shown promise. Effects (of impregnation) upon bed sorption/removal characteristics are to be studied with representative contaminants. The potential need to remove solutes added or produced during water disinfection and/or TB microbiological control must be investigated.

  10. [The microbiology department].

    PubMed

    Struelens, M; Delforge, M L; Denis, O; Liesnard, C; Rodriguez-Villalobos, H

    2002-01-01

    From the outset, the Department of Microbiology of Erasme Hospital has striven to offer to clinical teams a full range of high performance tests for diagnosis and therapeutic monitoring of bacterial, viral, fungal and parasitic infections, including opportunistic infections. Furthermore, the laboratory has developed and made available cutting edge tools for the epidemiologic surveillance and outbreak investigation in support to the hospital infection control and antibiotic resistance control programmes. Research and development programmes have led to technological innovation in the fields of molecular virologic diagnosis, notably for HIV and herpes viruses, rapid bacterial identification, detection of resistance genes and epidemiological typing. Research in collaboration with clinical teams has focused on congenital infections, HIV infection, opportunistic infections and prevention of nosocomial infection. The Department acts as national reference laboratory for a number of infectious diseases and co-ordinates or actively participates to several European multicentre studies and epidemiologic surveillance networks.

  11. Reinventing the International Space Station Payload Integration Processes and Capabilities

    NASA Technical Reports Server (NTRS)

    Jones, Rod; Price, Carmen; Copeland, Scott; Geiger, Wade; Geiger, Wade; Rice, Amanda; Lauchner, Adam

    2011-01-01

    The fundamental ISS payload integration philosophy, processes and capabilities were established in the context of how NASA science programs were conducted and executed in the early 1990 s. Today, with the designation of the United States (US) portion of ISS as a National Lab, the ISS payload customer base is growing to include other government agencies, private and commercial research. The fields of research are becoming more diverse expanding from the NASA centric physical, materials and human research sciences to test beds for exploration and technology demonstration, biology and biotechnology, and as an Earth and Space science platform. This new customer base has a broader more diverse set of expectations and requirements for payload design, verification, integration, test, training, and operations. One size fits all processes are not responsive to this broader customer base. To maintain an organization s effectiveness it must listen to its customers, understand their needs, learn from its mistakes, and foster an environment of continual process improvement. The ISS Payloads office is evolving to meet these new customer expectations.

  12. [Patient-oriented information processing in internal medicine].

    PubMed

    Lazarus, T; Porst, H

    1977-09-01

    The internistic accessory documentation as a partial region of the information processing referred to the patient in a hospital fulfils the demands of diagnostic and therapeutic kind from the point of view of the hospital physician to rationalise and optimize the demands of administrative work, such as identification and duration of stay, and demands of the physician performing the follow-up treatment to get a quick and sufficient information with the threefold aim of treatment (including prevention, diagnostics and after-treatment), documentation (including statistics, archivation, information) and research (any connection of data for cross-section and longitudinal section examinations you like).

  13. Shaping Disk Galaxy Stellar Populations via Internal and External Processes

    NASA Astrophysics Data System (ADS)

    Roškar, Rok

    2015-03-01

    In recent years, effects such as the radial migration of stars in disks have been recognized as important drivers of the properties of stellar populations. Radial migration arises due to perturbative effects of disk structures such as bars and spiral arms, and can deposit stars formed in disks to regions far from their birthplaces. Migrant stars can significantly affect the demographics of their new locales, especially in low-density regions such as in the outer disks. However, in the cosmological environment, other effects such as mergers and filamentary gas accretion also influence the disk formation process. Understanding the relative importance of these processes on the detailed evolution of stellar population signatures is crucial for reconstructing the history of the Milky Way and other nearby galaxies. In the Milky Way disk in particular, the formation of the thickened component has recently attracted much attention due to its potential to serve as a diagnostic of the galaxy's early history. Some recent work suggests, however, that the vertical structure of Milky Way stellar populations is consistent with models that build up the thickened component through migration. I discuss these developments in the context of cosmological galaxy formation.

  14. Microbiology of aquatic environments: Characterizations of the microbiotas of municipal water supplies, the International Space Station Internal Active Thermal Control System's heat transport fluid, and US Space Shuttle drinking water

    NASA Astrophysics Data System (ADS)

    Bernardini, James Nicholas, III

    An understanding of the microbiota within life support systems is essential for the prolonged presence of humans in space. This is because microbes may cause disease or induce biofouling and/or corrosion within spacecraft water systems. It is imperative that we develop effective high-throughput technologies for characterizing microbial populations that can eventually be used in the space environment. This dissertation describes testing and development of such methodologies, targeting both bacteria and viruses in water, and examines the bacterial and viral diversity within two spacecraft life support systems. The bacterial community of the International Space Station Internal Active Thermal Control System (IATCS) was examined using conventional culture-based and advanced molecular techniques including adenosine triphosphate (ATP) and Limulus Amebocyte Lysate (LAL) assays, direct microscopic examination, and analyses of 16S rRNA gene libraries from the community metagenome. The cultivable heterotrophs of the IATCS fluids ranged from below detection limit to 1.1x10 5/100 ml, and viable cells, measured by ATP, ranged from 1.4x10 3/100 ml to 7.7x105/100 ml. DNA extraction, cloning, sequencing, and bioinformatic analysis of the clones from 16S RNA gene libraries showed members of the firmicutes, alpha, beta, and gamma-proteobacteria to be present in the fluids. This persistent microbial bioburden and the presence of probable metal reducers, biofilm formers, and opportunistic pathogens illustrate the need for better characterization of bacterial communities present within spacecraft fluids. A new methodology was developed for detection of viruses in water using microarrays. Samples were concentrated by lyophilization, resuspended and filtered (0.22microm). Viral nucleic acids were then extracted, amplified, fluorescently labeled and hybridized onto a custom microarray with probes for ˜1000 known viruses. Numerous virus signatures were observed. Human Adenovirus C and

  15. Microbiological decontamination of natural honey by irradiation

    NASA Astrophysics Data System (ADS)

    Migdał, W.; Owczarczyk, H. B.; K ȩdzia, B.; Hołderna-K ȩdzia, E.; Madajczyk, D.

    2000-03-01

    Degree of microbiological decontamination, organoleptic and physico-chemical properties of natural honeys were investigated after radiation treatment. Seven kinds of honeys were irradiated with the beams of 10 MeV electrons from a 10 kW linear accelerator "Elektronika 10-10" at the dose 10 kGy. It was shown, that after irradiation, the total count of aerobic and anaerobic bacteria and moulds decrease by 99%. The antibiotic value in investigated honeys increased in turn from 1.67 to 2.67 after irradiation. Such factors and parameters of investigated honeys as their consistency, content of water and saccharose, acidity, the diastase and 5-HMF values were not changed significantly after irradiation. Decontamination by irradiation is a process which allows us to obtain high microbiological purity of honeys. It is especially needed, when honeys are used in surgical treatment of injuries and in nutrition of babies with food deficiency.

  16. Inflammation, suppuration, putrefaction, fermentation: Joseph Lister's microbiology

    PubMed Central

    Richardson, Ruth

    2013-01-01

    This paper focuses on Lister's inaugural lecture at King's College, London, in October 1877. As the new Professor of Clinical Surgery, Lister had much to report, including impressively high survival rates from complex operations previously regarded as foolhardy. Instead, he chose to address the processes of fermentation in wine, blood and milk. His reasons are not obvious to a modern audience, just as they probably were not to those who heard him in the Great Hall at King's. Having brought microbiological apparatus from his laboratory to the lecture theatre and presented proof of bacterial variety and specificity, Lister publicly demonstrated the creation of the first pure bacterial culture in the history of microbiology. It was an ingenious and well-thought-out strategy designed to generate a frame of mind among his new colleagues and future students, receptive to the causative role of bacteria in septic diseases. His timing was impeccable.

  17. FDA use of international standards in the premarket review process.

    PubMed

    Rechen, E; Barth, D J; Marlowe, D; Kroger, L

    1998-01-01

    "This is an exciting time," says Eric Rechen, policy analyst in the U.S. Food and Drug Administration's (FDA) Office of Device Evaluation (ODE). "We're entering an era in which standards will have a more prominent role in the review of medical devices than ever before." During the past 10 years, there has been significant growth in the importance of standards in regulatory processes, as Donald J. Barth, regulatory staff manager for the Medical Products Group at Hewlett Packard Company, notes in setting the stage for discussion of the latest developments. Donald Marlowe, director of the FDA's Office of Science and Technology, and Rechen explain the use of standards in the regulatory review process as part of FDA efforts to ensure public safety in a time of shrinking agency resources. Marlowe discusses provisions of the FDA Modernization Act of 1997 that allow manufacturers to submit a declaration of conformity to a standard to satisfy premarket review requirements. A guidance on the recognition and use of consensus standards, a list of recognized standards, and a list of frequently asked questions are available at the Web site of the Center for Devices and Radiological Health (CDRH) at www.fda.gov/cdrh and via the AAMI Web site at www.aami.org. The information is also available by telephone via CDRH Facts on Demand at 800-899-0381. Rechen provides details about the two new approaches for premarket notifications available under the new 510(k) paradigm. Manufacturers may demonstrate substantial equivalence through special and abbreviated 510(k)s in addition to traditional 510(k)s. A copy of the new 510(k) paradigm is available at the AAMI and CDRH Web sites and through Facts on Demand. As the FDA and many manufacturers enter the new world of abbreviated and special 510(k)s, Larry Kroger, GE Medical Systems, provides his comments based on the 4 years of experience manufacturers of diagnostic x-ray products have had with simplified 510(k)s. A comparison of the European

  18. 77 FR 21157 - Internal Revenue Service; Open Meeting of the Taxpayer Advocacy Panel Refund Processing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-09

    ...An open meeting of the Taxpayer Advocacy Panel Refund Processing Communications Project Committee will be conducted. The Taxpayer Advocacy Panel is soliciting public comments, ideas, and suggestions on improving customer service at the Internal Revenue...

  19. Critical Readiness Review EHS Water Quality and Microbiology

    NASA Technical Reports Server (NTRS)

    Woo, Cindy

    2010-01-01

    Presentation reviews the status in reference to the Environmental, Health and Safety (EHS) of the water quality and microbiology for the International Space Station. It includes information about crew training, hardware delivery, and those items that will be returned for study.

  20. Microbiological assay using bioluminescent organism

    SciTech Connect

    Stiffey, A.V.

    1987-12-21

    This invention relates to testing processes for toxicity involving microorganisms and, more particularly, to testing processes for toxicity involving bioluminescent organisms. The present known method of testing oil-well drilling fluids for toxicity employs the mysid shrimp (Mysidopsis bahia) as the assay organism. The shrimp are difficult to raise and handle as laboratory assay organisms. This method is labor-intensive, because it requires a assay time of about 96 hours. Summary of the Invention: A microbiological assay in which the assay organism is the dinoflagellate, Pyrocystis lunula. A sample of a substance to be assayed is added to known numbers of the bioluminescent dinoflagellate and the mixture is agitated to subject the organisms to a shear stress causing them to emit light. The amount of light emitted is measured and compared with the amount of light emitted by a known non-toxic control mixture to determine if there is diminution or non-diminution of light emitted by the sample under test which is an indication of the presence or absence of toxicity, respectively. Accordingly, an object of the present invention is the provision of an improved method of testing substances for toxicity. A further object of the invention is the provision of an improved method of testing oil-well drilling fluids for toxicity using bioluminescent dinoflagellate (Pyrocystis lunula).

  1. [Microbiological diagnosis of HIV infection].

    PubMed

    López-Bernaldo de Quirós, Juan Carlos; Delgado, Rafael; García, Federico; Eiros, José M; Ortiz de Lejarazu, Raúl

    2007-12-01

    Currently, there are around 150,000 HIV-infected patients in Spain. This number, together with the fact that this disease is now a chronic condition since the introduction of antiretroviral therapy, has generated an increasing demand on the clinical microbiology laboratories in our hospitals. This increase has occurred not only in the diagnosis and treatment of opportunistic diseases, but also in tests related to the diagnosis and therapeutic management of HIV infection. To meet this demand, the Sociedad de Enfermedades Infecciosas y Microbiología Clinica (Spanish Society of Infectious Diseases and Clinical Microbiology) has updated its standard Procedure for the microbiological diagnosis of HIV infection. The main advances related to serological diagnosis, plasma viral load, and detection of resistance to antiretroviral drugs are reviewed in this version of the Procedure.

  2. Microbiological criteria for retail foods. Professional Food Microbiology Group (PFMG) of the Institute of Food Science and Technology (IFST).

    PubMed

    1995-06-01

    This article proposes that microbiological criteria should only be drawn up and applied to foods if there is a full understanding and consideration of raw material selection, production process, packaging and finished product characteristics. The combined knowledge and expertise of public sector microbiologists and food industry microbiologists and technologists need to be harnessed in the establishment of such criteria. In this manner, microbiological criteria could be derived to the overall benefit of the consumer. A meeting of the Society for Applied Bacteriology held in November 1994 considered the issue of microbiological standards for foods and, in this paper, the recently formed PFMG presents an opinion on the 'Provisional microbiological guidelines' published by the Food Surveillance Group of the Public Health Laboratory Service. PMID:7786496

  3. Microbiological Monitoring in Geothermal Plants

    NASA Astrophysics Data System (ADS)

    Alawi, M.; Lerm, S.; Linder, R.; Vetter, A.; Vieth-Hillebrand, A.; Miethling-Graff, R.; Seibt, A.; Wolfgramm, M.; Wuerdemann, H.

    2010-12-01

    In the scope of the research projects “AquiScreen” and “MiProTherm” we investigated geothermally used groundwater systems under microbial, geochemical, mineralogical and petrological aspects. On one side an enhanced process understanding of engineered geothermal systems is mandatory to optimize plant reliability and economy, on the other side this study provides insights into the microbiology of terrestrial thermal systems. Geothermal systems located in the North German Basin and the Molasse Basin were analyzed by sampling of fluids and solid phases. The investigated sites were characterized by different temperatures, salinities and potential microbial substrates. The microbial population was monitored by the use of genetic fingerprinting techniques and PCR-cloning based on PCR-amplified 16S rRNA and dissimilatory sulfite reductase (DSR) genes. DNA-sequences of fingerprints and cloned PCR-products were compared to public databases and correlated with metabolic classes to provide information about the biogeochemical processes. In all investigated geothermal plants, covering a temperature range from 5° to 120°C, microorganisms were found. Phylogenetic gene analyses indicate a broad diversity of microorganisms adapted to the specific conditions in the engineered system. Beside characterized bacteria like Thermus scotoductus, Siderooxidans lithoautotrophicus and the archaeon Methanothermobacter thermoautotrophicus a high number of so far uncultivated microorganisms was detected. As it is known that - in addition to abiotic factors - microbes like sulfate-reducing bacteria (SRB) are involved in the processes of corrosion and scaling in plant components, we identified SRB by specific analyses of DSR genes. The SRB detected are closely related to thermotolerant and thermophilic species of Desulfotomaculum, Thermodesulfovibrio, Desulfohalobium and Thermodesulfobacterium, respectively. Overall, the detection of microbes known to be involved in biocorrosion and the

  4. Spectrometric microbiological analyzer

    NASA Astrophysics Data System (ADS)

    Schlager, Kenneth J.; Meissner, Ken E.

    1996-04-01

    Currently, there are four general approaches to microbiological analysis, i.e., the detection, identification and quantification of micro-organisms: (1) Traditional culturing and staining procedures, metabolic fermentations and visual morphological characteristics; (2) Immunological approaches employing microbe-specific antibodies; (3) Biotechnical techniques employing DNA probes and related genetic engineering methods; and (4) Physical measurement techniques based on the biophysical properties of micro-organisms. This paper describes an instrumentation development in the fourth of the above categories, physical measurement, that uses a combination of fluorometric and light scatter spectra to detect and identify micro-organisms at the species level. A major advantage of this approach is the rapid turnaround possible in medical diagnostic or water testing applications. Fluorometric spectra serve to define the biochemical characteristics of the microbe, and light scatter spectra the size and shape morphology. Together, the two spectra define a 'fingerprint' for each species of microbe for detection, identification and quantification purposes. A prototype instrument has been developed and tested under NASA sponsorship based on fluorometric spectra alone. This instrument demonstrated identification and quantification capabilities at the species level. The paper reports on test results using this instrument, and the benefits of employing a combination of fluorometric and light scatter spectra.

  5. PREFACE: International Symposium on Ultrasound in the Control of Industrial Processes (UCIP 2012)

    NASA Astrophysics Data System (ADS)

    Segura, Luis Elvira; Resa López, Pablo; Salazar, Jordi; Benedito Fort, José Javier; Martínez Graullera, Óscar

    2012-12-01

    The following describes most of the presentations (both oral and poster) given at the International Symposium of Ultrasound in the Control of Industrial Processes (UCIP 2012) celebrated in Madrid between 18 and 20 April 2012. This event was intended to be a meeting point for scientists, engineers and professionals from all over the world in the field of ultrasonics applied to the characterization and control of materials and processes in the industry. More precisely, the topics included were: 1. Novel applications of ultrasound in the industry (including high-power ultrasound) Food science Biotechnology and microbiology Pharmaceutics and cosmetics Petrochemistry and civil engineering 2. New insights in the ultrasonic characterization of media: Fluids and emulsions Nano- and micro-particle dispersions Soft materials Porous bodies and inhomogeneous materials 3. New developments in ultrasonic measuring techniques: Acoustic microscopy Piezoelectric sensors Ultrasonic imaging Signal processing The symposium was organized by the Centro de Acústica Aplicada y Evaluación No Destructiva (CAEND, UPM-CSIC) in collaboration with the Universidad Politécnica de Cataluña, the Universidad Politécnica de Valencia and the University of Leeds. During the conference, 32 posters and 33 oral communications were presented. In addition, 4 invited lectures were imparted: 'Acoustic microscopy, spectroscopy and nanoparticle detection' by Dr Malcolm Povey; 'Acoustic and electroacoustic spectroscopy' by Dr Andrei Dukhin; 'High-Resolution Ultrasonic Spectroscopy and its application for material analysis by Dr Vitaly Buckin; 'Ultrasonic sensors for process applications - state of the art' by Dr Bern Henning; and three tutorials were given: 'PZFlex - Finite Element Analysis for Virtual Prototyping' by Weidlinger Associates; 'SITAU - A flexible architecture controlled by MATLAB for the development of ultrasonic applications' by DASEL; 'Ultra-SCATTERERTM (Acoustics Suite) - The R&D Tool for

  6. Microbiological safety of household membrane water filter.

    PubMed

    Zhang, Yongli; Wang, Qing; Lou, Wei; Wang, Yuxin; Zhu, Xuan

    2013-04-01

    Waterborne pathogens outbreaks are major reasons of diarrhea disease worldwide. Detecting and monitoring emerging waterborne pathogens (EWPs) is important for drinking water microbiological safety. The microbiological safety of household water hollow fiber membrane filter which is the end of drinking water treatment process was studied with heterotrophic plate count (HPC) and real-time PCR method. The effect of the flow rate, idle time and washing fashion were investigated. Among the selected filters from three manufacturers, only the PVDF membrane water filter (Brand B) could achieve a good water purification criteria. Brand A was found a certain degree of EWPs in its effluent. The lowest bacteria-removing efficiency of the PVC membrane water filter was found Brand C. Our study showed that the microorganisms could reach up to 10(6) CFU ml(-1) and the 16s rDNA could reach up to 10(6) copies ml(-1) in the initial filtrate of Brand C. More species and amounts of EWPs were detected in the washing water. These results suggested that the popular household membrane filters might cause microbiological risks at certain circumstances such as the shock load of EWPs and leakage of the membranes in the case of abnormal source water or poor membrane filter quality.

  7. [Mass spectrometry in the clinical microbiology laboratory].

    PubMed

    Jordana-Lluch, Elena; Martró Català, Elisa; Ausina Ruiz, Vicente

    2012-12-01

    Infectious diseases are still a cause of high mortality and morbidity rates. Current microbiological diagnostic methods are based on culture and phenotypic identification of isolated microorganisms, which can be obtained in about 24-48 h. Given that the microbiological identification is of major importance for patient management, new diagnostic methods are needed in order to detect and identify microorganisms in a timely and accurate manner. Over the last few years, several molecular techniques based on the amplification of microbial nucleic acids have been developed with the aim of reducing the time needed for the identification of the microorganisms involved in different infectious processes. On the other hand, mass spectrometry has emerged as a rapid and consistent alternative to conventional methods for microorganism identification. This review describes the most widely used mass spectrometry technologies -matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and electrospray ionization time-of-flight (ESI-TOF)-, both for protein and nucleic acid analysis, as well as the commercial platforms available. Related publications of most interest in clinical microbiology are also reviewed.

  8. [Laboratory unification: advantages and disadvantages for clinical microbiology].

    PubMed

    Andreu, Antonia; Matas, Lurdes

    2010-10-01

    This article aims to reflect on which areas or tasks of microbiology laboratories could be unified with those of clinical biochemistry, hematology, immunology or pathology laboratories to benefit patients and the health system, as well as the areas that should remain independent since their amalgamation would not only fail to provide a benefit but could even jeopardize the quality of microbiological diagnosis, and consequently patient care. To do this, the distinct analytic phases of diagnosis are analyzed, and the advantages and disadvantages of amalgamation are evaluated in each phase. The pros and cons of the unification of certain areas such as the computer system, occupational risk units, customer service, purchasing logistics, and materials storage, etc, are also discussed. Lastly, the effect of unification on urgent microbiology diagnosis is analyzed. Microbiological diagnosis should be unique. The microbiologist should perform an overall evaluation of the distinct techniques used for a particular patient, both those that involve direct diagnosis (staining, culture, antigen detection techniques or molecular techniques) and indirect diagnosis (antibody detection). Moreover, the microbiology laboratory should be independent, with highly trained technicians and specialists in microbiology that provide added value as experts in infection and as key figures in the process of establishing a correct etiological diagnosis.

  9. [Laboratory unification: advantages and disadvantages for clinical microbiology].

    PubMed

    Andreu, Antonia; Matas, Lurdes

    2010-10-01

    This article aims to reflect on which areas or tasks of microbiology laboratories could be unified with those of clinical biochemistry, hematology, immunology or pathology laboratories to benefit patients and the health system, as well as the areas that should remain independent since their amalgamation would not only fail to provide a benefit but could even jeopardize the quality of microbiological diagnosis, and consequently patient care. To do this, the distinct analytic phases of diagnosis are analyzed, and the advantages and disadvantages of amalgamation are evaluated in each phase. The pros and cons of the unification of certain areas such as the computer system, occupational risk units, customer service, purchasing logistics, and materials storage, etc, are also discussed. Lastly, the effect of unification on urgent microbiology diagnosis is analyzed. Microbiological diagnosis should be unique. The microbiologist should perform an overall evaluation of the distinct techniques used for a particular patient, both those that involve direct diagnosis (staining, culture, antigen detection techniques or molecular techniques) and indirect diagnosis (antibody detection). Moreover, the microbiology laboratory should be independent, with highly trained technicians and specialists in microbiology that provide added value as experts in infection and as key figures in the process of establishing a correct etiological diagnosis. PMID:21129589

  10. The microbiology of metalworking fluids.

    PubMed

    Saha, Ratul; Donofrio, Robert S

    2012-06-01

    Metalworking fluids (MWFs) are complex mixtures of chemicals and are indispensable materials in industry. They are used as cooling and lubricating agents in different machining process such as grinding, milling, and cutting. The quality of MWFs is affected by physical, chemical, and microbial contaminates. In particular, MWFs are highly vulnerable to microbial contamination, which may act both as potential pathogens and deteriorgens. Microbial contamination is of major concern due to potential health hazards such as skin dermatitis and hypersensitivity pneumonitis. The contaminated MWFs can exhibit high degrees of microbial loading, ranging from 10(4) to 10(10) colony-forming units (CFU)/ml. Wide varieties of microorganisms are reported to colonize MWFs. Traditional culturing techniques are not only laborious and time consuming but also underestimate the actual distribution of the microorganisms present in the contaminated MWFs. Therefore, rapid molecular methods such as real-time PCR and fluorescent in situ hybridization are implemented to monitor the microbial load. In industry, biocides are presently used to control microbial contamination. However, it has its own disadvantages and therefore, in recent years, alternative methods such as UV irradiation were evaluated to reduce microbial contamination in MWFs. Microbes inhabiting the MWF are also capable of forming biofilm which is detrimental to the MWF system. Biofilm is resistant to common disinfectant methods, and thus further research and development is required to effectively control its formation within MWF systems. This review is intended to discuss the overall microbiological aspects of MWF. PMID:22543351

  11. Fermentation process kinetics. Reprinted from Journal of Biochemical Microbiological Technology and Engineering VOl. 1, No. 4 Pages 413-29 (1959).

    PubMed

    Gaden, E L

    2000-03-20

    Information on fermentation process kinetics is potentially valuable for the improvement of batch process performance; it is essential for continuous process design. An empirical examination of rate patterns in various fermentations discloses three basic types: (1) 'growth associated' products arising directly from the energy metabolism of carbohydrates supplied, (2) indirect products of carbohydrate metabolism and (3) products apparently unrelated to carbohydrate oxidation. Effects of operating variables on the primary kinetic processes, growth, sugar utilization and antibiotic formation, in the penicillin process, illustrate the special nature of this type.

  12. Establishing molecular microbiology facilities in developing countries.

    PubMed

    Ahmed, Salman S; Alp, Emine; Ulu-Kilic, Aysegul; Doganay, Mehmet

    2015-01-01

    Microbiology laboratories play an important role in epidemiology and infection control programs. Within microbiology laboratories, molecular microbiology techniques have revolutionized the identification and surveillance of infectious diseases. The combination of excellent sensitivity, specificity, low contamination levels and speed has made molecular techniques appealing methods for the diagnosis of many infectious diseases. In a well-equipped microbiology laboratory, the facility designated for molecular techniques remains indiscrete. However, in most developing countries, poor infrastructure and laboratory mismanagement have precipitated hazardous consequences. The establishment of a molecular microbiology facility within a microbiology laboratory remains fragmented. A high-quality laboratory should include both conventional microbiology methods and molecular microbiology techniques for exceptional performance. Furthermore, it should include appropriate laboratory administration, a well-designed facility, laboratory procedure standardization, a waste management system, a code of practice, equipment installation and laboratory personnel training. This manuscript lays out fundamental issues that need to be addressed when establishing a molecular microbiology facility in developing countries.

  13. 45 CFR 147.136 - Internal claims and appeals and external review processes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... independence and impartiality of the persons involved in making the decision. Accordingly, decisions regarding... internal claims and appeals process that would yield a decision on the merits of the claim. If a claimant... process. Specifically, in addition to complying with the requirements of 29 CFR 2560.503-1(h)(2)— (1)...

  14. Helping International Students Succeed Academically through Research Process and Plagiarism Workshops

    ERIC Educational Resources Information Center

    Chen, Yu-Hui; Van Ullen, Mary K.

    2011-01-01

    Workshops on the research process and plagiarism were designed to meet the needs of international students at the University at Albany. The research process workshop covered formulating research questions, as well as locating and evaluating sources. The plagiarism workshop focused on acknowledging sources, quoting, paraphrasing, and summarizing…

  15. [The modern microbiology in the clinical managing].

    PubMed

    Casal Román, Manuel

    2012-01-01

    The tuberculosis is one of the most important and mortal diseases of the world. The microbiological confirmatory diagnosis and the microbiological therapeutic orientation are fundamental nowadays in the tuberculosis in AIDS and in the Resistant tuberculosis. They are described throughout the time by the classic Microbiology: From 1882 to final 20th century (130 years). With the modern current Microbiology: In the beginning of the 21st century (20-30 years). And as will be done with the future Microbiology: From the years 2020-30. The important advances are outlined in the modern and future clinical microbiology, for the control of the Tuberculosis.

  16. Applied and Environmental Microbiology Gordon Research Conference

    SciTech Connect

    Wall, Judy D.

    2003-11-19

    The main objective of the Gordon Research Conference on Applied and Environmental Microbiology was to present and discuss new, fundamental research findings on microorganisms, their activities in the environment, their ecosystem-level effects, and their environmental or commercial applications. To accomplish this goal, knowledge of microbial diversity, interactions and population dynamics was required. The genomic basis of microbial processes, the cycling of naturally occurring and hazardous substances, and methodologies to assess the functional relationships of microorganisms in their habitats were essential for understanding the ecological consequences of microbial activities and the formulation of generalizing principles. In the last decade, molecular technology has revealed that microbial diversity is far more extensive than the limited view obtained from culturing procedures. Great advances in environmental microbiology have resulted from the development and application of molecular approaches to ecology and molecular evolution. A further surprise resulting from the application of these new tools is the blurring of the distinction between pathogenic traits versus those considered non-pathogenic. This year's conference addressed the issues of biodiversity, its development, and the impact of stress on gene selection and expression. In addition microbial metabolic versatility with toxins such as heavy metals, antibiotics, and organic pollutants were discussed. The nine session topics were (1) biodiversity and the bacterial species, (2) mechanisms of biodiversification, (3) biofilms in health and environment, (4) a genomic view of microbial response to stress, (5) microbial use of toxic metals, (6) microbial mineral formation and dissolution, (7) power and limitations of antimicrobials, (8) biodegradation of organic pollutants, and (9) astrobiology. The Conference had an international profile: the Conference Vice-Chair, Dr. Gerard Muyzer, was from The Nether lands

  17. Microbiological studies on hamburgers

    PubMed Central

    Tamminga, S. K.; Beumer, R. R.; Kampelmacher, E. H.

    1982-01-01

    One hundred and eighty-two raw, 112 pre-cooked and 750 cooked hamburgers composed mainly of beef or beef and pork were subjected to microbiological examination. Raw hamburgers gave total bacterial counts from 106 to 108 per g, counts of Enterobacteriaceae from 104 to 106 per g, of Escherichia coli from 103 to 105, of group D streptococci from 102 to 104, of Staphylococcus aureus from 3 to 102 and of Clostridium perfringens less than 10 bacteria per g. Of the samples, 32% contained salmonellas; the highest most probable number was 102 per g but most estimates were below 1 per g. Corresponding figures for the pre-cooked samples were 2-3 log cycles lower, and only one sample contained salmonella. Yersinia enterocolitica was not isolated from any raw or pre-cooked sample. Three hundred and ninety-five of the cooked hamburgers were prepared by grilling raw hamburgers for between 2 and 5·5 min. These gave total bacterial counts from 105 to 107 per g, and counts of Enterobacteriaceae from 102 to 105 per g. Of the samples, 9·4% contained salmonellas, always in numbers below 1 per g. The remaining 355 cooked hamburgers were prepared from samples pre-cooked for 10 min at 80 °C. Some were grilled and some fat fried. The total bacterial counts were from 103 to 105 per g, and counts of Enterobacteriaceae below 102 per g. Salmonellae, again in small numbers only, were recovered from 3·5% of samples. When hamburgers were artificially contaminated with Salmonella typhimurium it took 5·5 min on a commercial grill, 2·25 min frying in a frying pan and 1·75 min on a household grill to reliably reduce the salmonella count one hundredfold. This means that at many vending places hamburgers are often cooked for too short a time. D-values were determined for S. typhimurium in hamburger meat at 50, 55, 60, 65 and 70 °C, these values were 7·1, 5·1, 1·2, 0·9 and 0·6 min respectively. It can be concluded that the heating action in the centre of the hamburgers will take place more

  18. [Post-mortem microbiology analysis].

    PubMed

    Fernández-Rodríguez, Amparo; Alberola, Juan; Cohen, Marta Cecilia

    2013-12-01

    Post-mortem microbiology is useful in both clinical and forensic autopsies, and allows a suspected infection to be confirmed. Indeed, it is routinely applied to donor studies in the clinical setting, as well as in sudden and unexpected death in the forensic field. Implementation of specific sampling techniques in autopsy can minimize the possibility of contamination, making interpretation of the results easier. Specific interpretation criteria for post-mortem cultures, the use of molecular diagnosis, and its fusion with molecular biology and histopathology have led to post-mortem microbiology playing a major role in autopsy. Multidisciplinary work involving microbiologists, pathologists, and forensic physicians will help to improve the achievements of post-mortem microbiology, prevent infectious diseases, and contribute to a healthier population.

  19. Imaging mass spectrometry in microbiology

    PubMed Central

    Watrous, Jeramie D.; Dorrestein, Pieter C.

    2013-01-01

    Mass spectrometry tools which allow for the 2-D visualization of the distribution of trace metals, metabolites, surface lipids, peptides and proteins directly from biological samples without the need for chemical tagging or antibodies are becoming increasingly useful for microbiology applications. These tools, comprised of different imaging mass spectrometry techniques, are ushering in an exciting new era of discovery by allowing for the generation of chemical hypotheses based on of the spatial mapping of atoms and molecules that can correlate to or transcend observed phenotypes. In this review, we explore the wide range of imaging mass spectrometry techniques available to microbiologists and describe their unique applications to microbiology with respect to the types of microbiology samples to be investigated. PMID:21822293

  20. [Post-mortem microbiology analysis].

    PubMed

    Fernández-Rodríguez, Amparo; Alberola, Juan; Cohen, Marta Cecilia

    2013-12-01

    Post-mortem microbiology is useful in both clinical and forensic autopsies, and allows a suspected infection to be confirmed. Indeed, it is routinely applied to donor studies in the clinical setting, as well as in sudden and unexpected death in the forensic field. Implementation of specific sampling techniques in autopsy can minimize the possibility of contamination, making interpretation of the results easier. Specific interpretation criteria for post-mortem cultures, the use of molecular diagnosis, and its fusion with molecular biology and histopathology have led to post-mortem microbiology playing a major role in autopsy. Multidisciplinary work involving microbiologists, pathologists, and forensic physicians will help to improve the achievements of post-mortem microbiology, prevent infectious diseases, and contribute to a healthier population. PMID:23195835

  1. Discrimination against international medical graduates in the United States residency program selection process

    PubMed Central

    2010-01-01

    Background Available evidence suggests that international medical graduates have improved the availability of U.S. health care while maintaining academic standards. We wondered whether studies had been conducted to address how international graduates were treated in the post-graduate selection process compared to U.S. graduates. Methods We conducted a Medline search for research on the selection process. Results Two studies provide strong evidence that psychiatry and family practice programs respond to identical requests for applications at least 80% more often for U.S. medical graduates than for international graduates. In a third study, a survey of surgical program directors, over 70% perceived that there was discrimination against international graduates in the selection process. Conclusions There is sufficient evidence to support action against discrimination in the selection process. Medical organizations should publish explicit proscriptions of discrimination against international medical graduates (as the American Psychiatric Association has done) and promote them in diversity statements. They should develop uniform and transparent policies for program directors to use to select applicants that minimize the possibility of non-academic discrimination, and the accreditation organization should monitor whether it is occurring. Whether there should be protectionism for U.S. graduates or whether post-graduate medical education should be an unfettered meritocracy needs to be openly discussed by medicine and society. PMID:20100347

  2. Microbiologically induced deterioration of concrete - A Review

    PubMed Central

    Wei, Shiping; Jiang, Zhenglong; Liu, Hao; Zhou, Dongsheng; Sanchez-Silva, Mauricio

    2013-01-01

    Microbiologically induced deterioration (MID) causes corrosion of concrete by producing acids (including organic and inorganic acids) that degrade concrete components and thus compromise the integrity of sewer pipelines and other structures, creating significant problems worldwide. Understanding of the fundamental corrosion process and the causal agents will help us develop an appropriate strategy to minimize the costs in repairs. This review presents how microorganisms induce the deterioration of concrete, including the organisms involved and their colonization and succession on concrete, the microbial deterioration mechanism, the approaches of studying MID and safeguards against concrete biodeterioration. In addition, the uninvestigated research area of MID is also proposed. PMID:24688488

  3. 42 CFR 493.909 - Microbiology.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Microbiology. 493.909 Section 493.909 Public Health... Proficiency Testing Programs by Specialty and Subspecialty § 493.909 Microbiology. The subspecialties under the specialty of microbiology for which a program may offer proficiency testing are...

  4. 42 CFR 493.821 - Condition: Microbiology.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Condition: Microbiology. 493.821 Section 493.821 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... These Tests § 493.821 Condition: Microbiology. The specialty of microbiology includes, for purposes...

  5. 42 CFR 493.821 - Condition: Microbiology.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 5 2011-10-01 2011-10-01 false Condition: Microbiology. 493.821 Section 493.821 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... These Tests § 493.821 Condition: Microbiology. The specialty of microbiology includes, for purposes...

  6. 42 CFR 493.909 - Microbiology.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Microbiology. 493.909 Section 493.909 Public Health... Proficiency Testing Programs by Specialty and Subspecialty § 493.909 Microbiology. The subspecialties under the specialty of microbiology for which a program may offer proficiency testing are...

  7. 42 CFR 493.821 - Condition: Microbiology.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 5 2013-10-01 2013-10-01 false Condition: Microbiology. 493.821 Section 493.821 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... These Tests § 493.821 Condition: Microbiology. The specialty of microbiology includes, for purposes...

  8. 42 CFR 493.821 - Condition: Microbiology.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 5 2012-10-01 2012-10-01 false Condition: Microbiology. 493.821 Section 493.821 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... These Tests § 493.821 Condition: Microbiology. The specialty of microbiology includes, for purposes...

  9. 42 CFR 493.909 - Microbiology.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 5 2012-10-01 2012-10-01 false Microbiology. 493.909 Section 493.909 Public Health... Proficiency Testing Programs by Specialty and Subspecialty § 493.909 Microbiology. The subspecialties under the specialty of microbiology for which a program may offer proficiency testing are...

  10. 42 CFR 493.909 - Microbiology.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 5 2013-10-01 2013-10-01 false Microbiology. 493.909 Section 493.909 Public Health... Proficiency Testing Programs by Specialty and Subspecialty § 493.909 Microbiology. The subspecialties under the specialty of microbiology for which a program may offer proficiency testing are...

  11. 42 CFR 493.821 - Condition: Microbiology.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 5 2014-10-01 2014-10-01 false Condition: Microbiology. 493.821 Section 493.821 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... These Tests § 493.821 Condition: Microbiology. The specialty of microbiology includes, for purposes...

  12. 42 CFR 493.909 - Microbiology.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 5 2014-10-01 2014-10-01 false Microbiology. 493.909 Section 493.909 Public Health... Proficiency Testing Programs by Specialty and Subspecialty § 493.909 Microbiology. The subspecialties under the specialty of microbiology for which a program may offer proficiency testing are...

  13. 21 CFR 866.2540 - Microbiological incubator.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Microbiological incubator. 866.2540 Section 866.2540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2540...

  14. 21 CFR 866.2540 - Microbiological incubator.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Microbiological incubator. 866.2540 Section 866.2540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2540...

  15. 21 CFR 866.2540 - Microbiological incubator.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Microbiological incubator. 866.2540 Section 866.2540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2540...

  16. 21 CFR 866.2540 - Microbiological incubator.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Microbiological incubator. 866.2540 Section 866.2540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2540...

  17. 21 CFR 866.2540 - Microbiological incubator.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Microbiological incubator. 866.2540 Section 866.2540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2540...

  18. Microbiological mechanism of the improved nitrogen and phosphorus removal by embedding microbial fuel cell in Anaerobic-Anoxic-Oxic wastewater treatment process.

    PubMed

    Xie, Beizhen; Liu, Bojie; Yi, Yue; Yang, Lige; Liang, Dawei; Zhu, Ying; Liu, Hong

    2016-05-01

    Anaerobic-Anoxic-Oxic (AA/O) wastewater treatment process is a widely used wastewater treatment process for simultaneous nitrogen and phosphorus removal. Microbial fuel cell (MFC) can generate electricity and treat the organic wastewater simultaneously. Our previous research showed that embedding MFC in AA/O wastewater treatment process could enhance the pollutants removal efficiency. However, the mechanism was not clear. In this study, a lab-scale corridor-style AA/O reactor with MFC embedded was operated and both the total nitrogen and total phosphorus removal efficiencies were enhanced. DGGE and Illumina Miseq results demonstrated that both the microbial community structures on the surface of the cathode and in the suspensions of cathode chamber have been changed. The percentage of Thauera and Emticicia, identified as denitrifying bacteria, increased significantly in the suspension liquid when the MFC was embedded in the AA/O reactor. Moreover, the genus Rheinheimera were significantly enriched on the cathode surface, which might contribute to both the nitrogen removal enhancement and electricity generation. PMID:26874439

  19. New Approach for Setting a Management Criterion in Microbiological Monitoring Using Rapid Microbiological Methods.

    PubMed

    Miyashita, Noe; Tanaka, Makoto; Gotoda, Ryusuke

    2015-01-01

    The application of rapid microbiological methods (RMM) to bacterial monitoring in pharmaceutical manufacturing processes is now a key topic, since timely microbiological data are critical for product release, continuous process improvement and quality control. An automated, highly sensitive detection system has been developed which can measure the amount of ATP in a sample in 2 h with one hundredfold more sensitive than the conventional ATP method. One of the major subjects for adoption and implementation of RMM is how to set the criterion value for practical microbial control. This value was conventionally been set by experimental rule and indicated as the number of colonies counted after incubation in a particular medium. We have adopted a new approach to set a criterion value which enables assessment in whether the status of the object is normal or not. By setting this criterion value, it is possible to conduct the microbiological control with the intended probability of false-positive and false-negative. In this approach the probability distribution model of the measurement value of each object in a normal status has been established by performing repetitive measurement of each object. We have suggested and verified the probability distribution form of the ATP measurement value using measurement data of the standard bacterial solution of Staphylococcus aureus. The theoretical value of the model was in good agreement with the actual measured value. The results suggest it is possible to set an applicable management criterion value using this model and to conduct new microbiological monitoring using RMM. PMID:26521822

  20. Soil Microbiology, Ecology, and Biochemistry

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The 4th edition of Soil Microbiology, Ecology, and Biochemistry Edited by Eldor Paul continues in the vein of the 3rd edition by providing an excellent, broad-reaching introduction to soil biology. The new edition improves on the previous by providing extensive supplementary materials, links to outs...

  1. Veterinary Microbiology, 3rd Edition

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Veterinary Microbiology, Third Edition is organized into four sections and begins with an updated and expanded introductory section on infectious disease pathogenesis, diagnosis and clinical management. The second section covers bacterial and fungal pathogens, and the third section describes viral d...

  2. Strengthening Internal Quality Assurance Processes: Facilitating Student Evaluation Committees to Contribute

    ERIC Educational Resources Information Center

    Stalmeijer, Renée; Whittingham, Jill; de Grave, Willem; Dolmans, Diana

    2016-01-01

    Student evaluation committees play a crucial role in internal quality assurance processes as representatives of the student body. However, the students on these committees sometimes experience difficulty in providing constructive and structured feedback to faculty in an environment characterised by a strong power differential between student and…

  3. ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS - THE THERMAL DESORPTION UNIT - APPLICATIONS ANALYSIS REPORT

    EPA Science Inventory

    ELI ECO Logic International, Inc.'s Thermal Desorption Unit (TDU) is specifically designed for use with Eco Logic's Gas Phase Chemical Reduction Process. The technology uses an externally heated bath of molten tin in a hydrogen atmosphere to desorb hazardous organic compounds fro...

  4. Infusing Evaluative Thinking as Process Use: The Case of the International Development Research Centre (IDRC)

    ERIC Educational Resources Information Center

    Carden, Fred; Earl, Sarah

    2007-01-01

    Until the recent introduction of a dynamic interview-based process, the International Development Research Centre (IDRC), a Canadian development research funding agency, faced a challenge: project completion reports (PCRs) were not being completed in a timely and quality manner. This is a common problem many organizations face in completing…

  5. Researching International Processes of Education Policy Formation: Conceptual and Methodological Considerations

    ERIC Educational Resources Information Center

    Edwards, D. Brent, Jr.

    2012-01-01

    This article elaborates one approach to conceptualizing and investigating international processes of education policy formation (IPEPF), which are dynamic, multi-level and processual in nature. This contribution is important because, although research is increasingly conducted on phenomena with such characteristics, extended discussions of how…

  6. Reducing Post-Decision Dissonance in International Decisions: The Analytic Hierarchy Process Approach.

    ERIC Educational Resources Information Center

    DuBois, Frank L.

    1999-01-01

    Describes use of the analytic hierarchy process (AHP) as a teaching tool to illustrate the complexities of decision making in an international environment. The AHP approach uses managerial input to develop pairwise comparisons of relevant decision criteria to efficiently generate an appropriate solution. (DB)

  7. Supporting the Thesis Writing Process of International Research Students through an Ongoing Writing Group

    ERIC Educational Resources Information Center

    Li, Linda Y.; Vandermensbrugghe, Joelle

    2011-01-01

    Evidence from research suggests writing support is particularly needed for international research students who have to tackle the challenges of thesis writing in English as their second language in Western academic settings. This article reports the development of an ongoing writing group to support the thesis writing process of international…

  8. Dynamics of regenerative chatter and internal resonance in milling process with structural and cutting force nonlinearities

    NASA Astrophysics Data System (ADS)

    Moradi, Hamed; Movahhedy, Mohammad R.; Vossoughi, Gholamreza

    2012-07-01

    In this paper, internal resonance and nonlinear dynamics of regenerative chatter in milling process is investigated. An extended dynamic model of the peripheral milling process including both structural and cutting force nonlinearities is presented. Closed form expressions for the nonlinear cutting forces are derived through their Fourier series components. In the presence of the large vibration amplitudes, the loss of contact effect is included in this model. Using the multiple-scales approach, analytical approximate response of the delayed nonlinear system is obtained. Considering the internal resonance dynamics (i.e. mode coupling), the energy transfer between the coupled x-y modes is studied. The results show that during regenerative chatter under specific cutting conditions, one mode can decay. Furthermore, it is possible to adjust the rate at which the x-mode (or y-mode) decays by implementation of the internal resonance. Therefore, under both internal resonance and regenerative chatter conditions, it is possible to suppress the undesirable vibration of one mode (direction) in which accurate surface finish is required. Under the steady-state motion, jump phenomenon is investigated for the process with regenerative chatter under various cutting conditions. Moreover, the effects of structural and cutting force nonlinearities on the stability lobes diagram of the process are investigated.

  9. Internal Consistency Reliability of the Self-Report Antisocial Process Screening Device

    ERIC Educational Resources Information Center

    Poythress, Norman G.; Douglas, Kevin S.; Falkenbach, Diana; Cruise, Keith; Lee, Zina; Murrie, Daniel C.; Vitacco, Michael

    2006-01-01

    The self-report version of the Antisocial Process Screening Device (APSD) has become a popular measure for assessing psychopathic features in justice-involved adolescents. However, the internal consistency reliability of its component scales (Narcissism, Callous-Unemotional, and Impulsivity) has been questioned in several studies. This study…

  10. 37 CFR 1.471 - Corrections and amendments during international processing.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Corrections and amendments during international processing. 1.471 Section 1.471 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT...

  11. A Process Model for Developing Learning Design Patterns with International Scope

    ERIC Educational Resources Information Center

    Lotz, Nicole; Law, Effie Lai-Chong; Nguyen-Ngoc, Anh Vu

    2014-01-01

    This paper investigates the process of identifying design patterns in international collaborative learning environments. In this context, design patterns are referred to as structured descriptions of best practice with pre-defined sections such as problem, solution and consequences. We pay special attention to how the scope of a design pattern is…

  12. ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS - THE REACTOR SYSTEM - APPLICATIONS ANALYSIS REPORT

    EPA Science Inventory

    The ELI Eco Logic International Inc. (Eco Logic) process thermally separates organics, then chemically reduces them in a hydrogen atmosphere, converting them to a reformed gas that consists of light hydrocarbons and water. A scrubber treats the reformed gas to remove hydrogen chl...

  13. 49 CFR 520.24 - Internal processing of draft environmental impact statements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURES FOR CONSIDERING ENVIRONMENTAL IMPACTS Procedures § 520.24 Internal processing of draft environmental impact statements. Before circulating a DEIS for external review, the official responsible for the DEIS shall receive the concurrence...

  14. 47 CFR 73.3574 - Processing of international broadcast station applications.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Processing of international broadcast station applications. 73.3574 Section 73.3574 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.3574...

  15. International Education in Higher Education: A Developing Process of Engagement in Teacher Preparation Programs

    ERIC Educational Resources Information Center

    Ochoa, Alberto M.

    2010-01-01

    This article reviews the collective body of articles in this publication. It provides a brief discussion of the contextual need for global perspectives in teacher preparation programs for preparing teachers to acquire global perspectives. In the process, a number of questions are asked for making international teacher preparation possible. The…

  16. Microbiological, Geochemical and Hydrologic Processes Controlling Uranium Mobility: An Integrated Field Scale Subsurface Research Challenge Site at Rifle, Colorado, February 2011 to January 2012

    SciTech Connect

    Long, Philip E.; Banfield, Jill; Chandler, Darrell P.; Davis, James A.; Hettich, Bob; VerBerkmoes, Nathan; Jaffe, Peter R.; Kerkhof, Lee J.; Kukkadapu, Ravi K.; Lipton, Mary; Peacock, Aaron; Williams, Kenneth H.; Yabusaki, Steven B.

    2012-02-15

    The Rifle IFRC continued to make excellent progress during the last 12 months. As noted above, a key field experiment (Best Western) was performed during 2011 as a logical follow-on to the Super 8 field experiment preformed in 2010. In the Super 8 experiment, we successfully combined desorption and bioreduction and deployed a number of novel tracer techniques to enhance our ability to interpret the biogeochemistry of the experiment. In the Best Western experiment, we used the same experimental plot (Plot C) as was used for Super 8. The overarching objective of the Best Western field experiment was to compared the impacts of abiotic vs. biotic increases in alkalinity and to assess the mass of the sorbed pool of U(VI) at Rifle at the field scale. Both of these objectives were met. Preliminary analysis of the data indicate that the underlying biogeochemical data sets were obtained that will support a mechanistic understanding of the underlying processes, including remarkable insight into previously unrecognized microbial processes taking place during acetate amendment of the subsurface for a second time.

  17. [Microbiological diagnosis of infections of the skin and soft tissues].

    PubMed

    Burillo, Almudena; Moreno, Antonio; Salas, Carlos

    2007-11-01

    Skin and soft tissue infections are often seen in clinical practice, yet their microbiological diagnosis is among the most complex of laboratory tasks. The diagnosis of a skin and a soft tissue infection is generally based on clinical criteria and not microbiological results. A microbiological diagnosis is reserved for cases in which the etiology of infection is required, e.g., when the infection is particularly severe, when less common microorganisms are suspected as the causative agent (e.g. in immunocompromised patients), when response to antimicrobial treatment is poor, or when a longstanding wound does not heal within a reasonable period of time. We report the indications, sampling and processing techniques, and interpretation criteria for various culture types, including quantitative cultures from biopsy or tissue specimens and semiquantitative and qualitative cultures performed on all types of samples. For non-invasive samples taken from open wounds, application of the Q index to Gram stains is a cost-effective way to standardize sample quality assessment and interpretation of the pathogenic involvement of the different microorganisms isolated from cultures. All these issues are covered in the SEIMC microbiological procedure number 22: Diagnóstico microbiológico de las infecciones de piel y tejidos blandos (Microbiological diagnosis of infections of the skin and soft tissues) (2nd ed., 2006, www.seimc.org/protocolos/microbiologia).

  18. Interfacing microbiology and biotechnology. Conference abstracts

    SciTech Connect

    Maupin, Julia A.

    2001-05-19

    The Interfacing Microbiology and Biotechnology Conference was attended by over 100 faculty, post-docs, students, and research scientists from the US, Europe, and Latin America. The conference successfully stimulated communication and the dissemination of knowledge among scientists involved in basic and applied research. The focus of the conference was on microbial physiology and genetics and included sessions on C1 metabolism, archaeal metabolism, proteases and chaperones, gene arrays, and metabolic engineering. The meeting provided the setting for in-depth discussions between scientists who are internationally recognized for their research in these fields. The following objectives were met: (1) The promotion of interaction and future collaborative projects among scientists involved in basic and applied research which incorporates microbial physiology, genetics, and biochemistry; (2) the facilitation of communication of new research findings through seminars, posters, and abstracts; (3 ) the stimulation of enthusiasm and education among participants including graduate and undergraduate students.

  19. Microbiological, Geochemical and Hydrologic Processes Controlling Uranium Mobility: An Integrated Field-Scale Subsurface Research Challenge Site at Rifle, Colorado, Quality Assurance Project Plan

    SciTech Connect

    Fix, N. J.

    2008-01-07

    The U.S. Department of Energy (DOE) is cleaning up and/or monitoring large, dilute plumes contaminated by metals, such as uranium and chromium, whose mobility and solubility change with redox status. Field-scale experiments with acetate as the electron donor have stimulated metal-reducing bacteria to effectively remove uranium [U(VI)] from groundwater at the Uranium Mill Tailings Site in Rifle, Colorado. The Pacific Northwest National Laboratory and a multidisciplinary team of national laboratory and academic collaborators has embarked on a research proposed for the Rifle site, the object of which is to gain a comprehensive and mechanistic understanding of the microbial factors and associated geochemistry controlling uranium mobility so that DOE can confidently remediate uranium plumes as well as support stewardship of uranium-contaminated sites. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Rifle Integrated Field-Scale Subsurface Research Challenge Project.

  20. [4 years of Microbiología SEM (1994-1997)].

    PubMed

    Mas-Castellà, J

    1997-12-01

    Different aspects of Microbiología SEM editorial process over the years 1994-1997 are analyzed: number of originals received, the process leading to their publication, rates of accepted and refused papers, time needed for each step of the editorial process--which comprises scientific, language editing, if needed--, as well as some characteristics that can define the patterns of the articles, such as number of authors, institutions where the authors work and mean number of references. The contents of the different sections (editorial, research and review articles, perspectives, opinion, books review) are commented on, as well as the role played by some of them as forums for the discussion of topics of current scientific interest, especially the editorials focusing on the state-of-the-art of microbiological research in Latin American countries. Characteristics and frequency of monographic issues are also presented. The information is complemented with data about the circulation and distribution of the journal, its inclusion in international indexes and its current electronic publication on the world wide web.

  1. Microbiological monitoring of endoscopes: 5-year review.

    PubMed

    Gillespie, Elizabeth E; Kotsanas, Despina; Stuart, Rhonda L

    2008-07-01

    Periodic microbiological monitoring of endoscopes is a recommendation of the Gastroenterological Society of Australia (GENSA). The aim of monitoring has been to provide quality assurance of the cleaning and disinfection of endoscopes; however, there is controversy regarding its frequency. This lack of consensus stimulated a review of the experience within our health service. At Southern Health, routine microbiological sampling has involved 4-weekly monitoring of bronchoscopes, duodenoscopes and automated flexible endoscope reprocessors (AFER), and 3-monthly monitoring of all other gastrointestinal endoscopes. Records of testing were reviewed from 1 January 2002 until 31 December 2006. A literature review was conducted, cost analysis performed and positive cultures investigated. There were 2374 screening tests performed during the 5-year period, including 287 AFER, 631 bronchoscopes for mycobacteria and 1456 endoscope bacterial screens. There were no positive results of the AFER or bronchoscopes for mycobacteria. Of the 1456 endoscopic bacterial samples, six were positive; however, retesting resulted in no growth. The overall cost of tests performed and cost in time for nursing staff to collect the samples was estimated at $AUD 100,400. Periodic monitoring of endoscopes is both time-consuming and costly. Our review demonstrates that AFER (Soluscope) perform well in cleaning endoscopes. Based on our 5-year experience, assurance of quality for endoscopic use could be achieved through process control as opposed to product control. Maintenance of endoscopes and AFER should be in accordance with the manufacturer's instructions and microbiological testing performed on commissioning, annually and following repair. Initial prompt manual leak testing and manual cleaning followed by mechanical leak testing, cleaning and disinfection should be the minimum standard in reprocessing of endoscopes. PMID:18086113

  2. Developing microbiological learning materials for schools: best practice.

    PubMed

    Redfern, James; Burdass, Dariel; Verran, Joanna

    2015-03-01

    A resource for schools focusing on algae was developed subsequent to a review of the UK National Curriculum and teaching specifications, which revealed a significant opportunity for practical microbiology in schools. The five practical activities and the entire resource were trialled and refined so that the final publication provided valid, interesting and educational activities. After distribution to 750 schools, post-publication (summative) evaluation demonstrated a need to heavily emphasize curriculum links, and to remind teachers about resource on a regular basis. We believe that this process (from initial idea to final evaluation) provides an example of best practice in developing a practical microbiology educational resource.

  3. STS-114 Discovery Return to Flight: International Space Station Processing Overview

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Bruce Buckingham, NASA Public Affairs, introduces Scott Higgenbotham, STS-114 Payload Manager. Higgenbotham gives a power point presentation on the hardware that is going to fly in the Discovery Mission to the International Space Station. He presents a layout of the hardware which includes The Logistics Flight 1 (LF1) launch package configuration Multipurpose Logistics Module (MPLM), External Stowage Platform-2 (ESP-2) and the Lightweight Mission Peculiar Equipment Support Structure Carrier (LMC). He explains these payloads in detail. The LF-1 team is also shown in the International Space Station Processing Facility. This presentation ends with a brief question and answer period.

  4. The Headscarf Effect Revisited: Further Evidence for a Culture-Based Internal Face Processing Advantage.

    PubMed

    Wang, Yin; Thomas, Justin; Weissgerber, Sophia C; Kazemini, Sahar; Ul-Haq, Israr; Quadflieg, Susanne

    2015-03-01

    Encoding the internal features of unfamiliar faces poses a perceptual challenge that occasionally results in face recognition errors. Extensive experience with faces framed by a headscarf may, however, enhance perceivers' ability to process internal facial information. To examine this claim empirically, participants in the United Arab Emirates and the United States of America completed a standard part-whole face recognition task. Accuracy on the task was examined using a 2 (perceiver culture: Emirati vs American) x 2 (face race: Arab vs white) x 2 (probe type: part vs whole) x 3 (probe feature: eyes vs nose vs mouth) mixed-measures analysis of variance. As predicted, Emiratis outperformed Americans on the administered task. Although their recognition advantage occurred regardless of probe type, it was most pronounced for Arab faces and for trials that captured the processing of nose or mouth information. The findings demonstrate that culture-based experiences hone perceivers' face processing skills. PMID:26562256

  5. Impact of high pressure processing on color, bioactive compounds, polyphenol oxidase activity, and microbiological attributes of pumpkin purée.

    PubMed

    González-Cebrino, Francisco; Durán, Rocío; Delgado-Adámez, Jonathan; Contador, Rebeca; Bernabé, Rosario Ramírez

    2016-04-01

    Physicochemical parameters, bioactive compounds' content (carotenoids and total phenols), total antioxidant activity, and enzymatic activity of polyphenol oxidase (PPO) were evaluated after high pressure processing (HPP) on a pumpkin purée (cv. 'Butternut'). Three pressure levels (400, 500, and 600 MPa) were combined with three holding times (200, 400, and 600 s). The applied treatments reduced the levels of total aerobic mesophilic (TAM), total psychrophilic and psychrotrophic bacteria (TPP), and molds and yeasts (M&Y). All applied treatments did not affect enzymatic activity of PPO. Pressure level increased CIE L* values, which could enhance the lightness perception of high pressure (HP)-treated purées. No differences were found between the untreated and HP-treated purées regarding total phenols and carotenoids content (lutein, α-carotene, and β-carotene) and total antioxidant activity. HPP did not affect most quality parameters and maintained the levels of bioactive compounds. However, it did not achieve the complete inhibition of PPO, which could reduce the shelf-life of the pumpkin purée.

  6. Aerobic biodegradation of sludge from the effluent of a vegetable oil processing plant mixed with household waste: physical-chemical, microbiological, and spectroscopic analysis.

    PubMed

    Abouelwafa, Rajae; Ait Baddi, Ghita; Souabi, Salah; Winterton, Peter; Cegarra, Juan; Hafidi, Mohamed

    2008-12-01

    Sludge from a sewage treatment plant dealing with the effluent produced during the processing of crude vegetable oil (Lesieur-Cristal, Morocco) was composted in two mixtures (M1 and M2) with household waste obtained from landfill. The different physico-chemical characteristics of the final composts after 5 months of composting were, for M1 and M2, respectively: pH: 8.5 and 7.08; C/N: 10 and 16; proportion of decomposition: 78% and 55%, NH(4)(+)/NO(3)(-): 0.78 and 1.02. Monitoring the levels of lipid and total polyphenols showed a reduction of 81% and 72% for lipids and of 75% and 76% for polyphenols in M1 and M2, respectively. These reductions were paralleled by a rise in the humic acid content to reach 22 and 36mg/g, respectively. Overall, these results were confirmed by the FTIR spectroscopy study of the two mixtures. For M1, the FTIR spectra taken at different stages showed that during composting, biodegradation of the aliphatic compounds occurred as the proportion of aromatic structures increased. The transformations observed qualitatively were then confirmed quantitatively by the changes occurring in the various absorption ratios during composting. Mixture M2, however, presented strong absorbance of aliphatic compounds. These results were statistically confirmed by correlation tests and principal components analysis, which confirmed the maturity of the two composts, M1 having matured more than M2.

  7. A multi-microbe probiotic formulation processed at low and high drying temperatures: effects on growth performance, nutrient retention and caecal microbiology of broilers.

    PubMed

    Shim, Y H; Ingale, S L; Kim, J S; Kim, K H; Seo, D K; Lee, S C; Chae, B J; Kwon, I K

    2012-01-01

    1. Two experiments were conducted to evaluate a multi-microbe probiotic formulation processed at low (LT) or high (HT) drying temperature. 2. In both the experiments, 640 d-old Ross male chicks were randomly allotted to 4 treatments on the basis of initial BW for 35 d experiments. 3. In experiment one, dietary treatments were a negative control (NC; basal diet without any antimicrobial); positive control (PC; basal diet +10 mg/kg avilamycin); basal diet with 0·3% probiotic LT; and basal diet with 0·3% probiotic HT. 4. Improved overall weight gain, FCR and retention of CP were observed in birds fed the PC and probiotic diets when compared with birds fed the NC diet. At d 21, birds fed the probiotic and NC diets had more caecal Bifidobacterium and total anaerobes than birds fed the PC diet; while birds fed the PC and probiotic diets had fewer caecal Clostridium than birds fed the NC diet at d 35. 5. In experiment two, a 2 × 2 factorial arrangement of treatments was employed to evaluate the effects of two concentrations of probiotic HT (0·30 or 0·60%) and avilamycin (0 or 10 mg/kg). 6. Birds fed the 0·60% probiotic HT diet showed improved overall weight gain and CP retention, higher Lactobacillus and Bifidobacterium in the caecum, and reduced Clostridium and coliforms in the caecum. Inclusion of avilamycin improved the overall weight gain and feed intake, and reduced the caecal Clostridium and Bifidobacterium population. 7. In conclusion, high drying temperature had no effect on the efficacy of the multi-microbe probiotic formulation; while the probiotic HT formulation was more effective at the 0·60% level. Moreover, inclusion of avilamycin improved performance of birds but did not have any interaction with probiotics.

  8. IPMP 2013 - A comprehensive data analysis tool for predictive microbiology

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Predictive microbiology is an area of applied research in food science that uses mathematical models to predict the changes in the population of pathogenic or spoilage microorganisms in foods undergoing complex environmental changes during processing, transportation, distribution, and storage. It f...

  9. Visions of the Future in Drinking Water Microbiology.

    EPA Science Inventory

    Drinking water microbiology will have a tremendous impact on defining a safe drinking water in the future. There will be breakthroughs in realtime testing of process waters for pathogen surrogates with results made available within 1 hour for application to treatment adjustments ...

  10. The Effect of Vocabulary on Introductory Microbiology Instruction

    ERIC Educational Resources Information Center

    Richter, Emily

    2011-01-01

    This study examines the effect of the translation of traditional scientific vocabulary into plain English, a process referred to as Anglicization, on student learning in the context of introductory microbiology instruction. Data from Anglicized and Classical-vocabulary lab sections were collected. Data included exam scores as well as pre and…

  11. The importance of establishing an international network of tissue banks and regional tissue processing centers.

    PubMed

    Morales Pedraza, Jorge

    2014-03-01

    During the past four decades, many tissue banks have been established across the world with the aim of supplying sterilized tissues for clinical use and research purposes. Between 1972 and 2005, the International Atomic Energy Agency supported the establishment of more than sixty of these tissue banks in Latin America and the Caribbean, Asia and the Pacific, Africa and Eastern Europe; promoted the use of the ionizing radiation technique for the sterilization of the processed tissues; and encouraged cooperation between the established tissue banks during the implementation of its program on radiation and tissue banking at national, regional and international levels. Taking into account that several of the established tissue banks have gained a rich experience in the procurement, processing, sterilization, storage, and medical use of sterilized tissues, it is time now to strengthen further international and regional cooperation among interested tissue banks located in different countries. The purpose of this cooperation is to share the experience gained by these banks in the procurement, processing, sterilization, storage, and used of different types of tissues in certain medical treatments and research activities. This could be done through the establishment of a network of tissue banks and a limited number of regional tissue processing centers in different regions of the world. PMID:23765095

  12. Edging into the future: education in microbiology and beyond.

    PubMed

    Fahnert, Beatrix

    2016-04-01

    State-of-the-art papers from around the globe addressing current topics in education were published in the FEMS Microbiology Letters virtual Thematic Issue 'Education' in November 2015 (http://femsle.oxfordjournals.org/content/thematic-issue-education), which was innovative and well received by microbiologists and other educators. Its unique content is reviewed here to facilitate broader access and further discussions in the professional community. Best practice in supporting school teaching and exposing students to concepts from other disciplines is presented in context of inspiring the next generations, where also historical microbiology can be drawn upon. Technology-enhanced education is discussed including its applications (e.g. lecture podcasts for flipped learning, learning from experts via videoconference). Authentic learning is covered with examples of research-led teaching, water and showerhead biofilm analyses and participation in the International Genetically Engineered Machines competition. Enhancing employability is focussed on, including supporting personal development and work-readiness in general and for the changing nature of the microbiology profession. International mobility develops international awareness but challenges teachers. Teaching training, teaching excellence and dissemination of best practice are reviewed. Times of challenge and change in the Higher Education landscape motivate us to improve educational approaches and frameworks, so that we are prepared for new topics to emerge as current topics in education.

  13. Edging into the future: education in microbiology and beyond.

    PubMed

    Fahnert, Beatrix

    2016-04-01

    State-of-the-art papers from around the globe addressing current topics in education were published in the FEMS Microbiology Letters virtual Thematic Issue 'Education' in November 2015 (http://femsle.oxfordjournals.org/content/thematic-issue-education), which was innovative and well received by microbiologists and other educators. Its unique content is reviewed here to facilitate broader access and further discussions in the professional community. Best practice in supporting school teaching and exposing students to concepts from other disciplines is presented in context of inspiring the next generations, where also historical microbiology can be drawn upon. Technology-enhanced education is discussed including its applications (e.g. lecture podcasts for flipped learning, learning from experts via videoconference). Authentic learning is covered with examples of research-led teaching, water and showerhead biofilm analyses and participation in the International Genetically Engineered Machines competition. Enhancing employability is focussed on, including supporting personal development and work-readiness in general and for the changing nature of the microbiology profession. International mobility develops international awareness but challenges teachers. Teaching training, teaching excellence and dissemination of best practice are reviewed. Times of challenge and change in the Higher Education landscape motivate us to improve educational approaches and frameworks, so that we are prepared for new topics to emerge as current topics in education. PMID:26940289

  14. The time course of processing external and internal features of unfamiliar faces.

    PubMed

    Veres-Injac, Bozana; Schwaninger, Adrian

    2009-01-01

    The time course of processing internal and external facial features was studied in a sequential face matching task, where first a target face was presented, followed by a test face. The exposure duration of the test face was varied systematically (90, 120, 150 ms, and self-paced). In three tasks, participants were instructed to match either the whole face, only external features, or only internal features of the target and test face. Taken together, the results in all the three tasks provide evidence for very fast matching processes. For upright faces, maximal performance was achieved at 90 ms exposure duration and longer exposure durations (120, 150 ms, self-paced) did not improve accuracy. For inverted whole faces, reduced exposure duration resulted in an increase of matching errors, suggesting that below 150 ms of exposure duration, inverted faces cannot be matched reliably. When matching selected facial features only, no such inversion effect was found. Our data challenges previous claims that external features are matched faster than internal: no difference of time course was found between external and internal features. However, external features were matched more accurately. PMID:18421474

  15. Microbiological Spoilage of Cereal Products

    NASA Astrophysics Data System (ADS)

    Cook, Frederick K.; Johnson, Billie L.

    A wide range of cereal products, including bakery items, refrigerated dough, fresh pasta products, dried cereal products, snack foods, and bakery mixes, are manufactured for food consumption. These products are subject to physical, chemical, and microbiological spoilage that affects the taste, aroma, leavening, appearance, and overall quality of the end consumer product. Microorganisms are ubiquitous in nature and have the potential for causing food spoilage and foodborne disease. However, compared to other categories of food products, bakery products rarely cause food poisoning. The heat that is applied during baking or frying usually eliminates pathogenic and spoilage microorganisms, and low moisture contributes to product stability. Nevertheless, microbiological spoilage of these products occurs, resulting in substantial economic losses.

  16. Clinical microbiology of coryneform bacteria.

    PubMed Central

    Funke, G; von Graevenitz, A; Clarridge, J E; Bernard, K A

    1997-01-01

    Coryneform bacteria are aerobically growing, asporogenous, non-partially-acid-fast, gram-positive rods of irregular morphology. Within the last few years, there has been a massive increase in the number of publications related to all aspects of their clinical microbiology. Clinical microbiologists are often confronted with making identifications within this heterogeneous group as well as with considerations of the clinical significance of such isolates. This review provides comprehensive information on the identification of coryneform bacteria and outlines recent changes in taxonomy. The following genera are covered: Corynebacterium, Turicella, Arthrobacter, Brevibacterium, Dermabacter. Propionibacterium, Rothia, Exiguobacterium, Oerskovia, Cellulomonas, Sanguibacter, Microbacterium, Aureobacterium, "Corynebacterium aquaticum," Arcanobacterium, and Actinomyces. Case reports claiming disease associations of coryneform bacteria are critically reviewed. Minimal microbiological requirements for publications on disease associations of coryneform bacteria are proposed. PMID:8993861

  17. Microbiological testing of Skylab foods.

    NASA Technical Reports Server (NTRS)

    Heidelbaugh, N. D.; Mcqueen, J. L.; Rowley, D. B.; Powers , E. M.; Bourland, C. T.

    1973-01-01

    Review of some of the unique food microbiology problems and problem-generating circumstances the Skylab manned space flight program involves. The situations these problems arise from include: extended storage times, variations in storage temperatures, no opportunity to resupply or change foods after launch of the Skylab Workshop, first use of frozen foods in space, first use of a food-warming device in weightlessness, relatively small size of production lots requiring statistically valid sampling plans, and use of food as an accurately controlled part in a set of sophisticated life science experiments. Consideration of all of these situations produced the need for definite microbiological tests and test limits. These tests are described along with the rationale for their selection. Reported test results show good compliance with the test limits.

  18. Microbiological Contamination of Spacecraft

    NASA Technical Reports Server (NTRS)

    Pierson, D. L.; Bruce, R. J.; Groves, T. O.; Novikova, N. D.; Viktorov, A. N.

    2000-01-01

    The International Space Station (ISS) Phase1 Program resulted in seven US astronauts residing aboard the Russian Space Station Mir between March 1995 and May 1998. Collaboration between U.S. and Russian scientists consisted of collection and analyses of samples from the crewmembers and the Mir and Shuttle environments before, during, and after missions that lasted from 75 to 209 days in duration. The effects of long-duration space flight on the microbial characteristics of closed life support systems and the interactions of microbes with the spacecraft environment and crewmembers were investigated. Air samples were collected using a Russian or U.S.-supplied sampler (SAS, RCS, or Burkard,) while surface samples were collected using contact slides (Hycon) or swabs. Mir recycled condensate and stored potable water sources were analyzed using the U.S.-supplied Water Experiment Kit. In-flight analysis consisted of enumeration of levels of bacteria and fungi. Amounts of microorganisms seen in the air and on surfaces were mostly within acceptability lin1its; observed temporal fluctuations in levels of microbes probably reflect changes in environmental conditions (e.g., humidity). All Mir galley hot water samples were within the standards set for Mir and the ISS. Microbial isolates were returned to Earth for identification of bacterial and fungal isolates. Crew samples (nose, throat, skin, urine, and feces) were analyzed using methods approved for the medical evaluations of Shuttle flight crews. No significant changes in crew microbiota were found during space flight or upon return relative to preflight results. Dissemination of microbes between the crew and environment was demonstrated by D A fingerprinting. Some biodegradation of spacecraft materials was observed. Accumulation of condensate allowed for the recovery of a wide range of bacteria and fungi as well as some protozoa and dust mites.

  19. Microbiological quality of natural waters.

    PubMed

    Borrego, J J; Figueras, M J

    1997-12-01

    Several aspects of the microbiological quality of natural waters, especially recreational waters, have been reviewed. The importance of the water as a vehicle and/or a reservoir of human pathogenic microorganisms is also discussed. In addition, the concepts, types and techniques of microbial indicator and index microorganisms are established. The most important differences between faecal streptococci and enterococci have been discussed, defining the concept and species included. In addition, we have revised the main alternative indicators used to measure the water quality.

  20. [Modified lateral condensation (microbiological analysis)].

    PubMed

    Jácome Musule, J L; Vázquez del Mercado, M A; Hernández, J L; Granillo, N E

    1989-05-01

    In order to ascertain the presence of endodontobacterial flora, an in vivo microbiological study on fifty human teeth with necrotic pulp and periapical bone destruction, is submitted. The study verifies elimination of bacteria through a technique for the preparation of root canals. Results of this research ratify the presence of aerobic and anaerobic microorganisms, as well as the means to inhibit them. That will allow performing obturation under optimal conditions, thus increasing assurance of success in the endodontic therapy.

  1. PREFACE: I International Scientific School Methods of Digital Image Processing in Optics and Photonics

    NASA Astrophysics Data System (ADS)

    Gurov, I. P.; Kozlov, S. A.

    2014-09-01

    The first international scientific school "Methods of Digital Image Processing in Optics and Photonics" was held with a view to develop cooperation between world-class experts, young scientists, students and post-graduate students, and to exchange information on the current status and directions of research in the field of digital image processing in optics and photonics. The International Scientific School was managed by: Saint Petersburg National Research University of Information Technologies, Mechanics and Optics (ITMO University) - Saint Petersburg (Russia) Chernyshevsky Saratov State University - Saratov (Russia) National research nuclear University "MEPHI" (NRNU MEPhI) - Moscow (Russia) The school was held with the participation of the local chapters of Optical Society of America (OSA), the Society of Photo-Optical Instrumentation Engineers (SPIE) and IEEE Photonics Society. Further details, including topics, committees and conference photos are available in the PDF

  2. A review of internal combustion engine combustion chamber process studies at NASA Lewis Research Center

    NASA Technical Reports Server (NTRS)

    Schock, H. J.

    1984-01-01

    The performance of internal combustion stratified-charge engines is highly dependent on the in-cylinder fuel-air mixing processes occurring in these engines. Current research concerning the in-cylinder airflow characteristics of rotary and piston engines is presented. Results showing the output of multidimensional models, laser velocimetry measurements and the application of a holographic optical element are described. Models which simulate the four-stroke cycle and seal dynamics of rotary engines are also discussed.

  3. International Best Practices for Pre-Processing and Co-Processing Municipal Solid Waste and Sewage Sludge in the Cement Industry

    SciTech Connect

    Hasanbeigi, Ali; Lu, Hongyou; Williams, Christopher; Price, Lynn

    2012-07-01

    The purpose of this report is to describe international best practices for pre-processing and coprocessing of MSW and sewage sludge in cement plants, for the benefit of countries that wish to develop co-processing capacity. The report is divided into three main sections. Section 2 describes the fundamentals of co-processing, Section 3 describes exemplary international regulatory and institutional frameworks for co-processing, and Section 4 describes international best practices related to the technological aspects of co-processing.

  4. [Internal audit in medical laboratory: what means of control for an effective audit process?].

    PubMed

    Garcia-Hejl, Carine; Chianéa, Denis; Dedome, Emmanuel; Sanmartin, Nancy; Bugier, Sarah; Linard, Cyril; Foissaud, Vincent; Vest, Philippe

    2013-01-01

    To prepare the French Accreditation Committee (COFRAC) visit for initial certification of our medical laboratory, our direction evaluated its quality management system (QMS) and all its technical activities. This evaluation was performed owing an internal audit. This audit was outsourced. Auditors had an expertise in audit, a whole knowledge of biological standards and were independent. Several nonconformities were identified at that time, including a lack of control of several steps of the internal audit process. Hence, necessary corrective actions were taken in order to meet the requirements of standards, in particular, the formalization of all stages, from the audit program, to the implementation, review and follow-up of the corrective actions taken, and also the implementation of the resources needed to carry out audits in a pre-established timing. To ensure an optimum control of each step, the main concepts of risk management were applied: process approach, root cause analysis, effects and criticality analysis (FMECA). After a critical analysis of our practices, this methodology allowed us to define our "internal audit" process, then to formalize it and to follow it up, with a whole documentary system.

  5. [Internal audit in medical laboratory: what means of control for an effective audit process?].

    PubMed

    Garcia-Hejl, Carine; Chianéa, Denis; Dedome, Emmanuel; Sanmartin, Nancy; Bugier, Sarah; Linard, Cyril; Foissaud, Vincent; Vest, Philippe

    2013-01-01

    To prepare the French Accreditation Committee (COFRAC) visit for initial certification of our medical laboratory, our direction evaluated its quality management system (QMS) and all its technical activities. This evaluation was performed owing an internal audit. This audit was outsourced. Auditors had an expertise in audit, a whole knowledge of biological standards and were independent. Several nonconformities were identified at that time, including a lack of control of several steps of the internal audit process. Hence, necessary corrective actions were taken in order to meet the requirements of standards, in particular, the formalization of all stages, from the audit program, to the implementation, review and follow-up of the corrective actions taken, and also the implementation of the resources needed to carry out audits in a pre-established timing. To ensure an optimum control of each step, the main concepts of risk management were applied: process approach, root cause analysis, effects and criticality analysis (FMECA). After a critical analysis of our practices, this methodology allowed us to define our "internal audit" process, then to formalize it and to follow it up, with a whole documentary system. PMID:24113451

  6. Canadian perspectives on the nutrition care process and international dietetics and nutrition terminology.

    PubMed

    Atkins, Marlis; Basualdo-Hammond, Carlota; Hotson, Brenda

    2010-01-01

    The purpose of this paper is to outline benefits of adoption of the Nutrition Care Process (NCP) and International Dietetics and Nutrition Terminology (IDNT) by Canadian dietitians, discuss implementation considerations for broad-based action and change, and determine future directions. The NCP and IDNT are recommended by the International Confederation of Dietetic Associations for international adoption as a framework for dietetic practice. The NCP uses a client-centred framework to clarify the role of registered dietitians (RDs), nutrition practice elements and skills, and the environments in which RDs practice. It also incorporates an evaluation framework, including identification of specific goals and monitoring of clinical and behavioural outcomes, to improve the quality and effectiveness of nutrition care. The process helps RDs to identify interventions that are more likely to improve nutrition outcomes by providing a systematic approach that encourages critical thinking and problem-solving. IDNT provides a standard set of core nutrition care terms and definitions for the four steps of the nutrition care process: assessment, nutrition diagnosis, intervention, and monitoring/evaluation. Use of IDNT promotes uniform documentation of nutrition care, enables differentiation of the type and amount of nutrition care provided, and provides a basis for linking nutrition care activities with actual or predicted outcomes. To continue to advance the dietetic profession in the Canadian health system, RDs must demonstrate their value by highlighting population, group, and individual health outcomes that are most influenced by the RD. The NCP and IDNT will help dietitians achieve these goals.

  7. Case histories of external microbiologically influenced corrosion

    SciTech Connect

    Pikas, J.L.

    1997-05-01

    External microbiologically influenced corrosion (MIC) is a serious dilemma in the pipeline industry. Even today, it has not been recognized as such because it has been primarily mistaken for galvanic corrosion. Due to the type of coating materials used in the past, the cleaning process or lack of it, and application methods used, all coating systems have the propensity to develop defects and pinholes where disbondment and this type of microbial corrosion could occur. In addition, the pipeline may or may not have had cathodic protection initially and/or consistently applied. Given these factors and the interaction of bacteria from the soil, moisture availability, degree of cathodic protection, and temperature of the pipeline, this paper will discuss the role that microbes play in the disbondment process, thus resulting in corrosion of an underground pipeline. Several case histories, laboratory testing results, and field findings will be presented.

  8. Review of Current International Decision-Making Processes for Newborn Screening: Lessons for Australia

    PubMed Central

    Metternick-Jones, Selina Carolyne; Lister, Karla Jane; Dawkins, Hugh J. S.; White, Craig Anthony; Weeramanthri, Tarun Stephen

    2015-01-01

    Newborn bloodspot screening has been operating successfully in Australia for almost 50 years. Recently, the development of new technologies and treatments has led to calls for the addition of new conditions to the screening programs. Internationally, it is recognized by governments that national policies for newborn screening should support transparent and evidence-based decision making, and promote consistency between states within a country. Australia is lagging behind the international community, and currently has no national policies or decision-making processes, agreed by government, to support its newborn screening programs. In contrast, New Zealand (NZ), the United Kingdom (UK), and the United States of America (US) have robust and transparent processes to assess conditions for screening, which have been developed by, and have pathways to, government. This review provides detail on the current policy environment for newborn screening in Australia, highlighting that there are a number of risks to the programs resulting from the lack of a decision-making process. It also describes the processes used to assess conditions for newborn screening in the US, UK, and NZ. These examples highlight the benefits of developing a national decision-making process, including ensuring that screening is evidence based and effective. These examples also provide models that might be considered for Australia, as well as other countries currently seeking to introduce or expand newborn bloodspot screening. PMID:26442241

  9. An Examination of Individual Level Factors in Stress and Coping Processes: Perspectives of Chinese International Students in the United States

    ERIC Educational Resources Information Center

    Yan, Kun; Berliner, David C.

    2011-01-01

    No empirical research has focused solely upon understanding the stress and coping processes of Chinese international students in the United States. This qualitative inquiry examines the individual-level variables that affect the stress-coping process of Chinese international students and how they conceptualize and adapt to their stress at an…

  10. Aerospace Toxicology and Microbiology

    NASA Technical Reports Server (NTRS)

    James, John T.; Parmet, A. J.; Pierson, Duane L.

    2007-01-01

    Toxicology dates to the very earliest history of humanity with various poisons and venom being recognized as a method of hunting or waging war with the earliest documentation in the Evers papyrus (circa 1500 BCE). The Greeks identified specific poisons such as hemlock, a method of state execution, and the Greek word toxos (arrow) became the root of our modern science. The first scientific approach to the understanding of poisons and toxicology was the work during the late middle ages of Paracelsus. He formulated what were then revolutionary views that a specific toxic agent or "toxicon" caused specific dose-related effects. His principles have established the basis of modern pharmacology and toxicology. In 1700, Bernardo Ramazzini published the book De Morbis Artificum Diatriba (The Diseases of Workers) describing specific illnesses associated with certain labor, particularly metal workers exposed to mercury, lead, arsenic, and rock dust. Modern toxicology dates from development of the modern industrial chemical processes, the earliest involving an analytical method for arsenic by Marsh in 1836. Industrial organic chemicals were synthesized in the late 1800 s along with anesthetics and disinfectants. In 1908, Hamilton began the long study of occupational toxicology issues, and by WW I the scientific use of toxicants saw Haber creating war gases and defining time-dosage relationships that are used even today.

  11. Concepts in context: Processing mental state concepts with internal or external focus involves different neural systems.

    PubMed

    Oosterwijk, Suzanne; Mackey, Scott; Wilson-Mendenhall, Christine; Winkielman, Piotr; Paulus, Martin P

    2015-01-01

    According to embodied cognition theories, concepts are contextually situated and grounded in neural systems that produce experiential states. This view predicts that processing mental state concepts recruits neural regions associated with different aspects of experience depending on the context in which people understand a concept. This neuroimaging study tested this prediction using a set of sentences that described emotional (e.g., fear, joy) and nonemotional (e.g., thinking, hunger) mental states with internal focus (i.e., focusing on bodily sensations and introspection) or external focus (i.e., focusing on expression and action). Consistent with our predictions, data suggested that the inferior frontal gyrus, a region associated with action representation, was engaged more by external than internal sentences. By contrast, the ventromedial prefrontal cortex, a region associated with the generation of internal states, was engaged more by internal emotion sentences than external sentence categories. Similar patterns emerged when we examined the relationship between neural activity and independent ratings of sentence focus. Furthermore, ratings of emotion were associated with activation in the medial prefrontal cortex, whereas ratings of activity were associated with activation in the inferior frontal gyrus. These results suggest that mental state concepts are represented in a dynamic way, using context-relevant interoceptive and sensorimotor resources.

  12. An integrative affect regulation process model of internalized weight bias and intuitive eating in college women.

    PubMed

    Webb, Jennifer B; Hardin, Abigail S

    2016-07-01

    The present study extended the weight stigma and well-being process model (Tylka et al., 2014) by examining three affect regulation pathways that may help simultaneously explain the predicted inverse association between internalized weight bias and intuitive eating. A weight-diverse sample of 333 college women completed an online survey assessing internalized weight stigma, intuitive eating, body shame, body image flexibility, and self-compassion. Self-reported height and weight were used to calculate body mass index (BMI). Non-parametric bootstrap resampling procedures were computed to ascertain the presence of the indirect effects of internalized weight bias on intuitive eating via the three hypothesized mediators controlling for BMI in a combined model. Results demonstrated that body image flexibility significantly and self-compassion marginally contributed unique variance in accounting for this relationship. Our preliminary cross-sectional findings contribute to a nascent body of scholarship seeking to provide a theoretically-driven understanding of how negative and positive forms of experiencing and relating to the body may co-occur within individuals. Results also point to potential target variables to consider incorporating in later-stage efforts to promote more adaptive ways of eating amidst internalized weight stigma. PMID:26893074

  13. A novel mini-DNA barcoding assay to identify processed fins from internationally protected shark species.

    PubMed

    Fields, Andrew T; Abercrombie, Debra L; Eng, Rowena; Feldheim, Kevin; Chapman, Demian D

    2015-01-01

    There is a growing need to identify shark products in trade, in part due to the recent listing of five commercially important species on the Appendices of the Convention on International Trade in Endangered Species (CITES; porbeagle, Lamna nasus, oceanic whitetip, Carcharhinus longimanus scalloped hammerhead, Sphyrna lewini, smooth hammerhead, S. zygaena and great hammerhead S. mokarran) in addition to three species listed in the early part of this century (whale, Rhincodon typus, basking, Cetorhinus maximus, and white, Carcharodon carcharias). Shark fins are traded internationally to supply the Asian dried seafood market, in which they are used to make the luxury dish shark fin soup. Shark fins usually enter international trade with their skin still intact and can be identified using morphological characters or standard DNA-barcoding approaches. Once they reach Asia and are traded in this region the skin is removed and they are treated with chemicals that eliminate many key diagnostic characters and degrade their DNA ("processed fins"). Here, we present a validated mini-barcode assay based on partial sequences of the cytochrome oxidase I gene that can reliably identify the processed fins of seven of the eight CITES listed shark species. We also demonstrate that the assay can even frequently identify the species or genus of origin of shark fin soup (31 out of 50 samples).

  14. A Novel Mini-DNA Barcoding Assay to Identify Processed Fins from Internationally Protected Shark Species

    PubMed Central

    Fields, Andrew T.; Abercrombie, Debra L.; Eng, Rowena; Feldheim, Kevin; Chapman, Demian D.

    2015-01-01

    There is a growing need to identify shark products in trade, in part due to the recent listing of five commercially important species on the Appendices of the Convention on International Trade in Endangered Species (CITES; porbeagle, Lamna nasus, oceanic whitetip, Carcharhinus longimanus scalloped hammerhead, Sphyrna lewini, smooth hammerhead, S. zygaena and great hammerhead S. mokarran) in addition to three species listed in the early part of this century (whale, Rhincodon typus, basking, Cetorhinus maximus, and white, Carcharodon carcharias). Shark fins are traded internationally to supply the Asian dried seafood market, in which they are used to make the luxury dish shark fin soup. Shark fins usually enter international trade with their skin still intact and can be identified using morphological characters or standard DNA-barcoding approaches. Once they reach Asia and are traded in this region the skin is removed and they are treated with chemicals that eliminate many key diagnostic characters and degrade their DNA (“processed fins”). Here, we present a validated mini-barcode assay based on partial sequences of the cytochrome oxidase I gene that can reliably identify the processed fins of seven of the eight CITES listed shark species. We also demonstrate that the assay can even frequently identify the species or genus of origin of shark fin soup (31 out of 50 samples). PMID:25646789

  15. A novel mini-DNA barcoding assay to identify processed fins from internationally protected shark species.

    PubMed

    Fields, Andrew T; Abercrombie, Debra L; Eng, Rowena; Feldheim, Kevin; Chapman, Demian D

    2015-01-01

    There is a growing need to identify shark products in trade, in part due to the recent listing of five commercially important species on the Appendices of the Convention on International Trade in Endangered Species (CITES; porbeagle, Lamna nasus, oceanic whitetip, Carcharhinus longimanus scalloped hammerhead, Sphyrna lewini, smooth hammerhead, S. zygaena and great hammerhead S. mokarran) in addition to three species listed in the early part of this century (whale, Rhincodon typus, basking, Cetorhinus maximus, and white, Carcharodon carcharias). Shark fins are traded internationally to supply the Asian dried seafood market, in which they are used to make the luxury dish shark fin soup. Shark fins usually enter international trade with their skin still intact and can be identified using morphological characters or standard DNA-barcoding approaches. Once they reach Asia and are traded in this region the skin is removed and they are treated with chemicals that eliminate many key diagnostic characters and degrade their DNA ("processed fins"). Here, we present a validated mini-barcode assay based on partial sequences of the cytochrome oxidase I gene that can reliably identify the processed fins of seven of the eight CITES listed shark species. We also demonstrate that the assay can even frequently identify the species or genus of origin of shark fin soup (31 out of 50 samples). PMID:25646789

  16. PREFACE: MCWASP XIV: International Conference on Modelling of Casting, Welding and Advanced Solidification Processes

    NASA Astrophysics Data System (ADS)

    Yasuda, H.

    2015-06-01

    The current volume represents contributed papers of the proceedings of the 14th international conference on ''Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP XIV)'', Yumebutai International Conference Center, Awaji island, Hyogo, Japan on 21 - 26 June, 2016. The first conference of the series 'Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP)' was started up in 1980, and this is the 14th conference. The participants are more than 100 scientists from industry and academia, coming from 19 countries. In the conference, we have 5 invited, 70 oral and 31 poster presentations on different aspects of the modeling. The conference deals with various casting processes (Ingot / shape casting, continuous casting, direct chill casting and welding), fundamental phenomena (nucleation and growth, dendritic growth, eutectic growth, micro-, meso- and macrostructure formation and defect formation), coupling problems (electromagnetic interactions, application of ultrasonic wave), development of experimental / computational methods and so on. This volume presents the cutting-edge research in the modeling of casting, welding and solidification processes. I would like to thank MAGMA Giessereitechnologie GmbH, Germany and SCSK Corporation, Japan for supporting the publication of contributed papers. Hideyuki Yasuda Conference Chairman Department of Materials Science and Engineering, Kyoto University Japan

  17. 7 CFR 58.528 - Microbiological requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Requirements for Cottage Cheese Bearing Usda Official Identification § 58.528 Microbiological requirements. Compliance shall...

  18. [Microbiology of ground water and drinking water].

    PubMed

    Dott, W; Frank, C; Kämpfer, P; Tuschewitzki, G J; Wernicke, F

    1986-10-01

    Groundwater has been considered a safe source for drinking water protected against surface contamination. However, a number of reports about chemical and microbiological contamination have disproved this assumption. Besides hygienical monitoring, little is known about the microbiology of ground- and drinking water. The purpose of this paper is to give a review about the main fields of investigation concerning microbial activity in ground- and drinking-water-action. The hygienical relevant topics are: survival and transport of microorganisms, microbiological degradation of organic pollutants, turn-over of nitrogen compounds, oxidation and reduction of iron and manganese and development of methods for microbiological water examination.

  19. The Process for the Formulation of the International Telehealth Position Statement for Occupational Therapy

    PubMed Central

    JACOBS, KAREN; CASON, JANA; MCCULLOUGH, ANN

    2015-01-01

    The World Federation of Occupational Therapists (WFOT) consists of 84 member organizations representing over 420,000 occupational therapists internationally (WFOT, 2014). In 2014, WFOT published the WFOT Telehealth Position Statement on the use of telehealth in occupational therapy. The process for the formulation of the official document involved reviewing WFOT member organizations’ telehealth position statements and data collected from a survey sent to member organizations’ delegates in April 2014. Qualitative data from 39 countries yielded factors to consider in five key areas: licensure/registration requirements, the cost of technology, privacy and security, reimbursement/payment models, and other issues (e.g., need for collaboration/transfer of knowledge, client selection, provider competencies, standard of care). The WFOT Telehealth Position Statement addressed each of these areas. The collaborative effort resulting in the development of the WFOT Telehealth Position Statement serves as a model for other international organizations. PMID:27563380

  20. Cybernetics: a possible solution for the "knowledge gap" between "external" and "internal" in evaluation processes.

    PubMed

    Levin-Rozalis, Miri

    2010-11-01

    This paper addresses the issue of the knowledge gap between evaluators and the entity being evaluated: the dilemma of the knowledge of professional evaluators vs. the in-depth knowledge of the evaluated subjects. In order to optimize evaluative outcomes, the author suggests an approach based on ideas borrowed from the science of cybernetics as a method of evaluation--one that enables in-depth perception of the evaluated field without jeopardizing a rigorous study or the evaluator's professionalism. The paper focuses on the main concepts that deal with this dilemma--showing how cybernetics combines the different bodies of knowledge of the different stakeholders, including the professional evaluator, resulting in a coherent body of knowledge created mainly by those internal to the process, owned by them, and relevant to all--those who are internal and those who are external and their different purposes.

  1. Nuclear rRNA transcript processing versus internal transcribed spacer secondary structure.

    PubMed

    Coleman, Annette W

    2015-03-01

    rRNA is one of the few universal features of life, making it uniquely suited to assess phylogenetic relationships. The processing of the initial polycistronic rRNA transcript is also a conserved process, involving numerous cleavage events and the generation of secondary structures. The secondary structure of the internal transcribed spacer (ITS) regions of nuclear rRNA transcripts are well known for a wide variety of eukaryotes and have been used to aid in the alignment of these sequences for phylogenetic comparisons. By contrast, study of the processing of the initial rRNA transcripts has been largely limited to yeast, mice, rats, and humans. Here I examine the known cleavage sites in the two ITS regions and their positions relative to the secondary structure. A better understanding of the conservation of secondary structures and cleavage sites within the ITS regions will improve evolutionary inferences based on these sequences.

  2. Nature Reviews Microbiology: Focus on sustainability

    SciTech Connect

    Jones, Susan

    2008-07-01

    The largest microbial ecology meeting of 2008, ISME -12 (http://www.kenes.com/isme12/) will focus on sustainability. From the natural environment to engineered systems we rely on microorganisms to keep the globe turning and to sustainably maintain it. With this in mind, Nature Reviews Microbiology and the ISME Journal propose to jointly publish a set of articles that will be distributed in a Supplement at the conference and to the readers of both journals, to showcase, inform on and promote this important research theme. The specially commissioned articles will focus on the importance of microorganisms in climatic processes and research that aims to harness the capabilities of microorganisms to provide new energy sources.

  3. Microbiology Learning and Education Online.

    PubMed

    Guarner, Jeannette; Niño, Silvia M

    2016-05-01

    The ubiquity of devices that connect to the Internet has exploded, allowing for easy dissemination of information. Many teachers from kindergarten to universities use the information obtained online or post material they want their students to access. Online media readily places articles, books, videos, and games at our fingertips. The public in general also gathers health information from the Internet. The following review will explore what has been published regarding microbiology education and learning online and the use of electronic media by microbiologists for scientific purposes. PMID:26935727

  4. Microbiology Learning and Education Online.

    PubMed

    Guarner, Jeannette; Niño, Silvia M

    2016-05-01

    The ubiquity of devices that connect to the Internet has exploded, allowing for easy dissemination of information. Many teachers from kindergarten to universities use the information obtained online or post material they want their students to access. Online media readily places articles, books, videos, and games at our fingertips. The public in general also gathers health information from the Internet. The following review will explore what has been published regarding microbiology education and learning online and the use of electronic media by microbiologists for scientific purposes.

  5. Microbiology Learning and Education Online

    PubMed Central

    Niño, Silvia M.

    2016-01-01

    The ubiquity of devices that connect to the Internet has exploded, allowing for easy dissemination of information. Many teachers from kindergarten to universities use the information obtained online or post material they want their students to access. Online media readily places articles, books, videos, and games at our fingertips. The public in general also gathers health information from the Internet. The following review will explore what has been published regarding microbiology education and learning online and the use of electronic media by microbiologists for scientific purposes. PMID:26935727

  6. A review of internal combustion engine combustion chamber process studies at NASA Lewis Research Center

    NASA Technical Reports Server (NTRS)

    Schock, H. J.

    1984-01-01

    The performance of internal combustion stratified-charge engines is highly dependent on the in-cylinder fuel-air mixing processes occurring in these engines. Current research concerning the in-cylinder airflow characteristics of rotary and piston engines is presented. Results showing the output of multidimensional models, laser velocimetry measurements and the application of a holographic optical element are described. Models which simulate the four-stroke cycle and seal dynamics of rotary engines are also discussed. Previously announced in STAR as N84-24999

  7. Sustaining a Mature Risk Management Process: Ensuring the International Space Station for a Vibrant Future

    NASA Technical Reports Server (NTRS)

    Raftery, Michael; Carter-Journet, Katrina

    2013-01-01

    The International Space Station (ISS) risk management methodology is an example of a mature and sustainable process. Risk management is a systematic approach used to proactively identify, analyze, plan, track, control, communicate, and document risks to help management make risk-informed decisions that increase the likelihood of achieving program objectives. The ISS has been operating in space for over 14 years and permanently crewed for over 12 years. It is the longest surviving habitable vehicle in low Earth orbit history. Without a mature and proven risk management plan, it would be increasingly difficult to achieve mission success throughout the life of the ISS Program. A successful risk management process must be able to adapt to a dynamic program. As ISS program-level decision processes have evolved, so too has the ISS risk management process continued to innovate, improve, and adapt. Constant adaptation of risk management tools and an ever-improving process is essential to the continued success of the ISS Program. Above all, sustained support from program management is vital to risk management continued effectiveness. Risk management is valued and stressed as an important process by the ISS Program.

  8. Microbiology of nitrogen cycle in animal manure compost

    PubMed Central

    Maeda, Koki; Hanajima, Dai; Toyoda, Sakae; Yoshida, Naohiro; Morioka, Riki; Osada, Takashi

    2011-01-01

    Summary Composting is the major technology in the treatment of animal manure and is a source of nitrous oxide, a greenhouse gas. Although the microbiological processes of both nitrification and denitrification are involved in composting, the key players in these pathways have not been well identified. Recent molecular microbiological methodologies have revealed the presence of dominant Bacillus species in the degradation of organic material or betaproteobacterial ammonia‐oxidizing bacteria on nitrification on the surface, and have also revealed the mechanism of nitrous oxide emission in this complicated process to some extent. Some bacteria, archaea or fungi still would be considered potential key players, and the contribution of some pathways, such as nitrifier denitrification or heterotrophic nitrification, might be involved in composting. This review article discusses these potential microbial players in nitrification–denitrification within the composting pile and highlights the relevant unknowns through recent activities that focus on the nitrogen cycle within the animal manure composting process. PMID:21375720

  9. Improving the informed consent process in international collaborative rare disease research: effective consent for effective research.

    PubMed

    Gainotti, Sabina; Turner, Cathy; Woods, Simon; Kole, Anna; McCormack, Pauline; Lochmüller, Hanns; Riess, Olaf; Straub, Volker; Posada, Manuel; Taruscio, Domenica; Mascalzoni, Deborah

    2016-08-01

    The increased international sharing of data in research consortia and the introduction of new technologies for sequencing challenge the informed consent (IC) process, adding complexities that require coordination between research centres worldwide. Rare disease consortia present special challenges since available data and samples may be very limited. Thus, it is especially relevant to ensure the best use of available resources but at the same time protect patients' right to integrity. To achieve this aim, there is an ethical duty to plan in advance the best possible consent procedure in order to address possible ethical and legal hurdles that could hamper research in the future. Therefore, it is especially important to identify key core elements (CEs) to be addressed in the IC documents for international collaborative research in two different situations: (1) new research collections (biobanks and registries) for which information documents can be created according to current guidelines and (2) established collections obtained without IC or with a previous consent that does not cover all CEs. We propose here a strategy to deal with consent in these situations. The principles have been applied and are in current practice within the RD-Connect consortia - a global research infrastructure funded by the European Commission Seventh Framework program but forward looking in terms of issues addressed. However, the principles established, the lessons learned and the implications for future research are of direct relevance to all internationally collaborative rare-disease projects.

  10. Critical Infrastructure Protection II, The International Federation for Information Processing, Volume 290.

    NASA Astrophysics Data System (ADS)

    Papa, Mauricio; Shenoi, Sujeet

    The information infrastructure -- comprising computers, embedded devices, networks and software systems -- is vital to day-to-day operations in every sector: information and telecommunications, banking and finance, energy, chemicals and hazardous materials, agriculture, food, water, public health, emergency services, transportation, postal and shipping, government and defense. Global business and industry, governments, indeed society itself, cannot function effectively if major components of the critical information infrastructure are degraded, disabled or destroyed. Critical Infrastructure Protection II describes original research results and innovative applications in the interdisciplinary field of critical infrastructure protection. Also, it highlights the importance of weaving science, technology and policy in crafting sophisticated, yet practical, solutions that will help secure information, computer and network assets in the various critical infrastructure sectors. Areas of coverage include: - Themes and Issues - Infrastructure Security - Control Systems Security - Security Strategies - Infrastructure Interdependencies - Infrastructure Modeling and Simulation This book is the second volume in the annual series produced by the International Federation for Information Processing (IFIP) Working Group 11.10 on Critical Infrastructure Protection, an international community of scientists, engineers, practitioners and policy makers dedicated to advancing research, development and implementation efforts focused on infrastructure protection. The book contains a selection of twenty edited papers from the Second Annual IFIP WG 11.10 International Conference on Critical Infrastructure Protection held at George Mason University, Arlington, Virginia, USA in the spring of 2008.

  11. Improving the informed consent process in international collaborative rare disease research: effective consent for effective research

    PubMed Central

    Gainotti, Sabina; Turner, Cathy; Woods, Simon; Kole, Anna; McCormack, Pauline; Lochmüller, Hanns; Riess, Olaf; Straub, Volker; Posada, Manuel; Taruscio, Domenica; Mascalzoni, Deborah

    2016-01-01

    The increased international sharing of data in research consortia and the introduction of new technologies for sequencing challenge the informed consent (IC) process, adding complexities that require coordination between research centres worldwide. Rare disease consortia present special challenges since available data and samples may be very limited. Thus, it is especially relevant to ensure the best use of available resources but at the same time protect patients' right to integrity. To achieve this aim, there is an ethical duty to plan in advance the best possible consent procedure in order to address possible ethical and legal hurdles that could hamper research in the future. Therefore, it is especially important to identify key core elements (CEs) to be addressed in the IC documents for international collaborative research in two different situations: (1) new research collections (biobanks and registries) for which information documents can be created according to current guidelines and (2) established collections obtained without IC or with a previous consent that does not cover all CEs. We propose here a strategy to deal with consent in these situations. The principles have been applied and are in current practice within the RD-Connect consortia – a global research infrastructure funded by the European Commission Seventh Framework program but forward looking in terms of issues addressed. However, the principles established, the lessons learned and the implications for future research are of direct relevance to all internationally collaborative rare-disease projects. PMID:26860059

  12. Improving the informed consent process in international collaborative rare disease research: effective consent for effective research.

    PubMed

    Gainotti, Sabina; Turner, Cathy; Woods, Simon; Kole, Anna; McCormack, Pauline; Lochmüller, Hanns; Riess, Olaf; Straub, Volker; Posada, Manuel; Taruscio, Domenica; Mascalzoni, Deborah

    2016-08-01

    The increased international sharing of data in research consortia and the introduction of new technologies for sequencing challenge the informed consent (IC) process, adding complexities that require coordination between research centres worldwide. Rare disease consortia present special challenges since available data and samples may be very limited. Thus, it is especially relevant to ensure the best use of available resources but at the same time protect patients' right to integrity. To achieve this aim, there is an ethical duty to plan in advance the best possible consent procedure in order to address possible ethical and legal hurdles that could hamper research in the future. Therefore, it is especially important to identify key core elements (CEs) to be addressed in the IC documents for international collaborative research in two different situations: (1) new research collections (biobanks and registries) for which information documents can be created according to current guidelines and (2) established collections obtained without IC or with a previous consent that does not cover all CEs. We propose here a strategy to deal with consent in these situations. The principles have been applied and are in current practice within the RD-Connect consortia - a global research infrastructure funded by the European Commission Seventh Framework program but forward looking in terms of issues addressed. However, the principles established, the lessons learned and the implications for future research are of direct relevance to all internationally collaborative rare-disease projects. PMID:26860059

  13. Microbiological Lessons Learned from the Space Shuttle

    NASA Technical Reports Server (NTRS)

    Pierson, Duane L.; Ott, C. Mark; Bruce, Rebekah; Castro, Victoria A.; Mehta, Satish K.

    2011-01-01

    After 30 years of being the centerpiece of NASA s human spacecraft, the Space Shuttle will retire. This highly successful program provided many valuable lessons for the International Space Station (ISS) and future spacecraft. Major microbiological risks to crewmembers include food, water, air, surfaces, payloads, animals, other crewmembers, and ground support personnel. Adverse effects of microorganisms are varied and can jeopardize crew health and safety, spacecraft systems, and mission objectives. Engineering practices and operational procedures can minimize the negative effects of microorganisms. To minimize problems associated with microorganisms, appropriate steps must begin in the design phase of new spacecraft or space habitats. Spacecraft design must include requirements to control accumulation of water including humidity, leaks, and condensate on surfaces. Materials used in habitable volumes must not contribute to microbial growth. Use of appropriate materials and the implementation of robust housekeeping that utilizes periodic cleaning and disinfection will prevent high levels of microbial growth on surfaces. Air filtration can ensure low levels of bioaerosols and particulates in the breathing air. The use of physical and chemical steps to disinfect drinking water coupled with filtration can provide safe drinking water. Thorough preflight examination of flight crews, consumables, and the environment can greatly reduce pathogens in spacecraft. The advances in knowledge of living and working onboard the Space Shuttle formed the foundation for environmental microbiology requirements and operations for the International Space Station (ISS) and future spacecraft. Research conducted during the Space Shuttle Program resulted in an improved understanding of the effects of spaceflight on human physiology, microbial properties, and specifically the host-microbe interactions. Host-microbe interactions are substantially affected by spaceflight. Astronaut immune

  14. Laboratory Design for Microbiological Safety

    PubMed Central

    Phillips, G. Briggs; Runkle, Robert S.

    1967-01-01

    Of the large amount of funds spent each year in this country on construction and remodeling of biomedical research facilities, a significant portion is directed to laboratories handling infectious microorganisms. This paper is intended for the scientific administrators, architects, and engineers concerned with the design of new microbiological facilities. It develops and explains the concept of primary and secondary barriers for the containment of microorganisms. The basic objectives of a microbiological research laboratory, (i) protection of the experimenter and staff, (ii) protection of the surrounding community, and (iii) maintenance of experimental validity, are defined. In the design of a new infectious-disease research laboratory, early identification should be made of the five functional zones of the facility and their relation to each other. The following five zones and design criteria applicable to each are discussed: clean and transition, research area, animal holding and research area, laboratory support, engineering support. The magnitude of equipment and design criteria which are necessary to integrate these five zones into an efficient and safe facility are delineated. Images Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 PMID:4961771

  15. An Internal Model Architecture for Novelty Detection: Implications for Cerebellar and Collicular Roles in Sensory Processing

    PubMed Central

    Anderson, Sean R.; Porrill, John; Pearson, Martin J.; Pipe, Anthony G.; Prescott, Tony J.; Dean, Paul

    2012-01-01

    The cerebellum is thought to implement internal models for sensory prediction, but details of the underlying circuitry are currently obscure. We therefore investigated a specific example of internal-model based sensory prediction, namely detection of whisker contacts during whisking. Inputs from the vibrissae in rats can be affected by signals generated by whisker movement, a phenomenon also observable in whisking robots. Robot novelty-detection can be improved by adaptive noise-cancellation, in which an adaptive filter learns a forward model of the whisker plant that allows the sensory effects of whisking to be predicted and thus subtracted from the noisy sensory input. However, the forward model only uses information from an efference copy of the whisking commands. Here we show that the addition of sensory information from the whiskers allows the adaptive filter to learn a more complex internal model that performs more robustly than the forward model, particularly when the whisking-induced interference has a periodic structure. We then propose a neural equivalent of the circuitry required for adaptive novelty-detection in the robot, in which the role of the adaptive filter is carried out by the cerebellum, with the comparison of its output (an estimate of the self-induced interference) and the original vibrissal signal occurring in the superior colliculus, a structure noted for its central role in novelty detection. This proposal makes a specific prediction concerning the whisker-related functions of a region in cerebellar cortical zone A2 that in rats receives climbing fibre input from the superior colliculus (via the inferior olive). This region has not been observed in non-whisking animals such as cats and primates, and its functional role in vibrissal processing has hitherto remained mysterious. Further investigation of this system may throw light on how cerebellar-based internal models could be used in broader sensory, motor and cognitive contexts. PMID

  16. Manual of Environmental Microbiology - Literature Review.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The field of environmental microbiology has made tremendous strides since the original microscopic observations of Antony van Leeuwenhock in 1677. The Manual of Environmental Microbiology, 3rd edition embraces these technological advances and is perhaps the most comprehensive and informative book s...

  17. Understanding the Internal Chemical Composition and Physical Processes of the Solar Interior

    NASA Astrophysics Data System (ADS)

    Basu, Sarbani; Grevesse, Nicolas; Mathis, Stephane; Turck-Chièze, Sylvaine

    2015-12-01

    The Sun, the closest and most well studied of stars, is generally used as a standard that other stars are compared to. Models of the Sun are constantly tested with helioseismic data. These data allow us to probe the internal structure and dynamics of the Sun. Among the main sources of the data is the SOHO spacecraft that has been continuously observing the Sun for more than a solar cycle. Current solar models, although good, do not include all the physical processes that are present in the Sun. In this chapter we focus on specific inputs to solar models and discuss generally neglected dynamical physical processes whose inclusion could result in models that are much better representatives of the Sun.

  18. Investigation of multifilamentary Nb 3Sn strand for ITER by internal Sn process

    NASA Astrophysics Data System (ADS)

    Zhang, P. X.; Zhou, L.; Tang, X. D.; Li, C. G.; Wu, Y.; Li, K.; Yan, G.; Yang, M.; Feng, Y.; Liu, X. H.; Weng, P. D.; Lu, Y. F.

    2006-10-01

    By internal Sn process we have successfully fabricated the multifilamentary Nb3Sn strand with a diameter of 0.79 mm, which has 5616-6270 filaments. A two-step heat treatment was used for the Nb3Sn strands. The first step is related to bronzing process between Cu and Sn at a temperature range of 200-600 °C, whereas the second step for the formation of superconducting Nb3Sn phase at 600-800 °C. A non-Cu Jc (12 T, 4.2 K) value of 1087 A/mm2 has been obtained. The microstructure and transport property of strands have been discussed.

  19. Perceptions of Internal Medicine Residency Program Candidates on the Use of Simulation in the Selection Process

    PubMed Central

    Cannon, Keith; Hartsell, Zachary; Ivanov, Ilko; Charles, Joseph; Joshi, Harshad; Blair, Janis; Geyer, Holly

    2014-01-01

    Background The recruitment of skilled candidates into internal medicine residency programs has relied on traditional interviewing techniques with varying degrees of success. The development of simulated medical technology has provided a new arena in which to assess candidates' clinical skills, knowledge base, situational awareness, and problem-solving dexterities within a standardized environment for educational and assessment purposes. Objective The purpose of this study was to investigate the interest of program candidates in incorporating simulation medicine into the internal medicine residency interview process. Methods As a prospective, survey-based analysis, potential candidates who completed an interview between October 2012 and January 2013 with an accredited internal medicine residency program were sent a postmatch survey that incorporated 3 additional questions relating to their prior experience with medical simulation and their views on incorporating the technology into the interview format. Results Of the 88 candidates who completed an interview, 92% (n  =  81) were scheduled to graduate medical school in 2013 and were graduates of a US medical school. All survey responders described previous experience with medical simulation. Fifty-eight percent (n  =  51) of responders described being “less likely” to interview with or join a residency program if they were required to participate in a 10-minute medical simulation during the interview process. Conclusions The results of this study suggest that despite the increasing role of technology in medical education, its role in high-stakes evaluations (such as residency interviews) requires further maturation before general acceptance by residency candidates can be expected. PMID:24949144

  20. Processing and evaluation of long fiber thermoplastic composite plates for internal fixation

    NASA Astrophysics Data System (ADS)

    Warren, Paul B.

    The metallic plates used in internal fracture fixation may have up to ten times the elastic modulus of normal bone tissue, causing stress shielding-induced osteopenia in healed bone that can lead to re-fracture after plate removal and prolonged and painful recovery. Thermoplastic polymer matrix composites reinforced with long carbon fiber are promising alternative materials for internal fixation plates because they may be produced with relative ease and be tailored to have specific mechanical properties, alleviating the stress shielding problem. Long carbon fiber-reinforced polyetheretherketone (LCF PEEK) plates were produced using the extrusion / compression molding process. Static flexural testing determined that LCF PEEK plates with rectangular cross-section had an average flexural modulus of 12 GPa, or 23% of the flexural modulus of a stainless steel plate. The LCF PEEK plates also experienced negligible (14.7%, 14.5%, and 16.7%) reductions in modulus after fatigue testing at applied moments of 2.5, 3.0, and 3.5 N•m, respectively, over 106 load cycles. Aging the plates in 0.9% NaCl solution for four and eight weeks caused 0.34% and 0.28% increases in plate mass, respectively. No significant decrease of flexural properties due to aging was detected. Differential scanning calorimetry (DSC) revealed the PEEK matrix of the plates to be 24.5% crystalline, which is lower than typical PEEK crystallinity values of 30-35%. Scanning electron microscopy (SEM) revealed three times as many fiber pullout areas in LCF PEEK fracture surfaces as in fracture surfaces of long carbon fiber-reinforced polyphenylenesulfide (LCF PPS), another plate material tested. DSC and SEM data suggest that improvements in processing conditions and fiber/matrix bonding, along with higher carbon fiber fractions, would enhance LCF PEEK plate performance. LCF PEEK remains a promising alternative to stainless steel for internal fixation plates.

  1. Automated Formosat Image Processing System for Rapid Response to International Disasters

    NASA Astrophysics Data System (ADS)

    Cheng, M. C.; Chou, S. C.; Chen, Y. C.; Chen, B.; Liu, C.; Yu, S. J.

    2016-06-01

    FORMOSAT-2, Taiwan's first remote sensing satellite, was successfully launched in May of 2004 into the Sun-synchronous orbit at 891 kilometers of altitude. With the daily revisit feature, the 2-m panchromatic, 8-m multi-spectral resolution images captured have been used for researches and operations in various societal benefit areas. This paper details the orchestration of various tasks conducted in different institutions in Taiwan in the efforts responding to international disasters. The institutes involved including its space agency-National Space Organization (NSPO), Center for Satellite Remote Sensing Research of National Central University, GIS Center of Feng-Chia University, and the National Center for High-performance Computing. Since each institution has its own mandate, the coordinated tasks ranged from receiving emergency observation requests, scheduling and tasking of satellite operation, downlink to ground stations, images processing including data injection, ortho-rectification, to delivery of image products. With the lessons learned from working with international partners, the FORMOSAT Image Processing System has been extensively automated and streamlined with a goal to shorten the time between request and delivery in an efficient manner. The integrated team has developed an Application Interface to its system platform that provides functions of search in archive catalogue, request of data services, mission planning, inquiry of services status, and image download. This automated system enables timely image acquisition and substantially increases the value of data product. Example outcome of these efforts in recent response to support Sentinel Asia in Nepal Earthquake is demonstrated herein.

  2. Microbiological Food Safety Surveillance in China.

    PubMed

    Pei, Xiaoyan; Li, Ning; Guo, Yunchang; Liu, Xiumei; Yan, Lin; Li, Ying; Yang, Shuran; Hu, Jing; Zhu, Jianghui; Yang, Dajin

    2015-09-01

    Microbiological food safety surveillance is a system that collects data regarding food contamination by foodborne pathogens, parasites, viruses, and other harmful microbiological factors. It helps to understand the spectrum of food safety, timely detect food safety hazards, and provide relevant data for food safety supervision, risk assessment, and standards-setting. The study discusses the microbiological surveillance of food safety in China, and introduces the policies and history of the national microbiological surveillance system. In addition, the function and duties of different organizations and institutions are provided in this work, as well as the generation and content of the surveillance plan, quality control, database, and achievement of the microbiological surveillance of food safety in China.

  3. Microbiological Food Safety Surveillance in China

    PubMed Central

    Pei, Xiaoyan; Li, Ning; Guo, Yunchang; Liu, Xiumei; Yan, Lin; Li, Ying; Yang, Shuran; Hu, Jing; Zhu, Jianghui; Yang, Dajin

    2015-01-01

    Microbiological food safety surveillance is a system that collects data regarding food contamination by foodborne pathogens, parasites, viruses, and other harmful microbiological factors. It helps to understand the spectrum of food safety, timely detect food safety hazards, and provide relevant data for food safety supervision, risk assessment, and standards-setting. The study discusses the microbiological surveillance of food safety in China, and introduces the policies and history of the national microbiological surveillance system. In addition, the function and duties of different organizations and institutions are provided in this work, as well as the generation and content of the surveillance plan, quality control, database, and achievement of the microbiological surveillance of food safety in China. PMID:26343705

  4. Organizing an International Information Network in Education: Process and Problems. Organisation D'Un Reseau International D'Information Sur L'Education: Processus Et Problemes.

    ERIC Educational Resources Information Center

    Pritchard, Roger

    One of a series of Unesco technical information reports, this paper describes the process of setting up an international information network that would disseminate information to developing nations about educational policy and planning. Written in English and French, the paper surveys the general context in which a network has to operate, presents…

  5. Cultural adaptation process for international dissemination of the strengthening families program.

    PubMed

    Kumpfer, Karol L; Pinyuchon, Methinin; Teixeira de Melo, Ana; Whiteside, Henry O

    2008-06-01

    The Strengthening Families Program (SFP) is an evidence-based family skills training intervention developed and found efficacious for substance abuse prevention by U.S researchers in the 1980s. In the 1990s, a cultural adaptation process was developed to transport SFP for effectiveness trials with diverse populations (African, Hispanic, Asian, Pacific Islander, and Native American). Since 2003, SFP has been culturally adapted for use in 17 countries. This article reviews the SFP theory and research and a recommended cultural adaptation process. Challenges in international dissemination of evidence-based programs (EBPs) are discussed based on the results of U.N. and U.S. governmental initiatives to transport EBP family interventions to developing countries. The technology transfer and quality assurance system are described, including the language translation and cultural adaptation process for materials development, staff training, and on-site and online Web-based supervision and technical assistance and evaluation services to assure quality implementation and process evaluation feedback for improvements.

  6. Applications of Combustion Research on the International Space Station to Industrial Processes on Earth

    NASA Astrophysics Data System (ADS)

    Schowengerdt, F.

    2002-01-01

    The mission of the Center for Commercial Applications of Combustion in Space (CCACS) at the Colorado School of Mines is to conduct research and educate students in scientific areas related to combustion. The center focuses on those areas where results can be applied to the development of commercial products and processes and where the research can benefit from the unique properties of space. The center is planning combustion-related research aboard the International Space Station (ISS) that will further this mission. The research will be conducted in the two ISS facilities designed for combustion experiments, Space-DRUMSTM and the Combustion Integrated Rack (CIR) of the Fluids and Combustion Facility. Space-DRUMSTM is a containerless processing facility employing dynamic acoustic positioning. Guigne International, Ltd. of St. John's, Newfoundland, a CCACS member, is developing the facility in partnership with Astrium Space- Infrastructure and Teledyne Brown Engineering. This universal processing facility can handle large samples with virtually complete vibration isolation from the space station and no contamination from the experimental processing chamber. The CCACS research to be done in Space-DRUMSTM includes combustion synthesis of glass-ceramics and porous materials, nanoparticle synthesis, catalytic combustion, fluid physics and granular materials. The launch of Space-DRUMSTM to the ISS is currently scheduled for ULF-1 in January of 2003. The CIR is being developed by NASA-Glenn Research Center, and is a general-purpose combustion furnace designed to accommodate a wide range of scientific experiments. The CCACS research to be done in the CIR includes water mist fire suppression, flame synthesis of ceramic powders, nanoparticle synthesis and catalytic combustion. The CIR is currently under development, with an expected launch date in the 2005 timeframe. The applications of this combustion research in manufacturing and processing industries are far

  7. The Role of the Clinical Laboratory in the Future of Health Care: Lean Microbiology

    PubMed Central

    Samuel, Linoj

    2014-01-01

    This commentary will introduce lean concepts into the clinical microbiology laboratory. The practice of lean in the clinical microbiology laboratory can remove waste, increase efficiency, and reduce costs. Lean, Six Sigma, and other such management initiatives are useful tools and can provide dividends but must be accompanied by organizational leadership commitment to sustaining the lean culture in the laboratory setting and providing resources and time to work through the process. PMID:24574289

  8. Panel 5: Microbiology and Immunology Panel

    PubMed Central

    Murphy, Timothy F.; Chonmaitree, Tasnee; Barenkamp, Stephen; Kyd, Jennelle; Nokso-Koivisto, Johanna; Patel, Janak A.; Heikkinen, Terho; Yamanaka, Noboru; Ogra, Pearay; Swords, W. Edward; Sih, Tania; Pettigrew, Melinda M.

    2014-01-01

    Objective The objective is to perform a comprehensive review of the literature from January 2007 through June 2011 on the virology, bacteriology, and immunology related to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Three subpanels with co-chairs comprising experts in the virology, bacteriology, and immunology of otitis media were formed. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a second draft was created. The entire panel met at the 10th International Symposium on Recent Advances in Otitis Media in June 2011 and discussed the review and refined the content further. A final draft was created, circulated, and approved by the panel. Conclusion Excellent progress has been made in the past 4 years in advancing an understanding of the microbiology and immunology of otitis media. Advances include laboratory-based basic studies, cell-based assays, work in animal models, and clinical studies. Implications for Practice The advances of the past 4 years formed the basis of a series of short-term and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media. PMID:23536533

  9. Microbiological Spoilage of Spices, Nuts, Cocoa, and Coffee

    NASA Astrophysics Data System (ADS)

    Pinkas, Joan M.; Battista, Karen; Morille-Hinds, Theodora

    Spices, nuts, cocoa, and coffee are raw materials that may be used alone or as ingredients in the manufacture of processed food products. The control of microbiological spoilage of these raw materials at the ingredient stage will enable the food processor to better assure the production of high-quality foods with an acceptable shelf life. While this chapter is limited to four materials, many of the spoilage control procedures recommended can also be applied to other raw materials of a similar nature.

  10. Expert systems in clinical microbiology.

    PubMed

    Winstanley, Trevor; Courvalin, Patrice

    2011-07-01

    This review aims to discuss expert systems in general and how they may be used in medicine as a whole and clinical microbiology in particular (with the aid of interpretive reading). It considers rule-based systems, pattern-based systems, and data mining and introduces neural nets. A variety of noncommercial systems is described, and the central role played by the EUCAST is stressed. The need for expert rules in the environment of reset EUCAST breakpoints is also questioned. Commercial automated systems with on-board expert systems are considered, with emphasis being placed on the "big three": Vitek 2, BD Phoenix, and MicroScan. By necessity and in places, the review becomes a general review of automated system performances for the detection of specific resistance mechanisms rather than focusing solely on expert systems. Published performance evaluations of each system are drawn together and commented on critically.

  11. The microbiology of terrestrial ecosystems

    SciTech Connect

    Richards, B.N.

    1987-01-01

    Emphasizing the role of soil organisms, especially fungi and bacteria, in maintaining productive and stable ecosystems, this book addresses the imbalance found in most ecological texts, which often neglect microorganisms. It stresses the inter-relationship between soil microbes and plants in functional activities such as the capture and transfer of energy and the circulation of chemical elements in ecological systems. It begins with a review of basic concepts followed by a description of the soil as a living entity, including its physical and chemical characteristics, and the life forms found within it. Organic matter mineralization is treated in the context if energy flow and carbon turnover in the biosphere. Also covered are mineral cycling, the microbiology of the rhizosphere, mycorrhiza, root nodule symbiosis, and the cycling of nutrients in the soil-plant-atmosphere system.

  12. Expert Systems in Clinical Microbiology

    PubMed Central

    Winstanley, Trevor; Courvalin, Patrice

    2011-01-01

    Summary: This review aims to discuss expert systems in general and how they may be used in medicine as a whole and clinical microbiology in particular (with the aid of interpretive reading). It considers rule-based systems, pattern-based systems, and data mining and introduces neural nets. A variety of noncommercial systems is described, and the central role played by the EUCAST is stressed. The need for expert rules in the environment of reset EUCAST breakpoints is also questioned. Commercial automated systems with on-board expert systems are considered, with emphasis being placed on the “big three”: Vitek 2, BD Phoenix, and MicroScan. By necessity and in places, the review becomes a general review of automated system performances for the detection of specific resistance mechanisms rather than focusing solely on expert systems. Published performance evaluations of each system are drawn together and commented on critically. PMID:21734247

  13. ic-cmtp3: 3rd International Conference on Competitive Materials and Technology Processes

    NASA Astrophysics Data System (ADS)

    2016-04-01

    Competitiveness is one of the most important factors in our lives and it plays a key role in the efficiency both of organizations and societies. The more scientifically advanced and prepared organizations develop more competitive materials with better physical, chemical, and biological properties, and the leading companies apply more competitive equipment and technological processes. The aims of the 3rd International Conference on Competitive Materials and Technology Processes (ic-cmtp3), and the 1st International Symposium on Innovative Carbons and Carbon Based Materials (is-icbm1) and the 1st International Symposium on Innovative Construction Materials (is-icm1) organized alongside are the following: —Promote new methods and results of scientific research in the fields of material, biological, environmental and technological sciences; —Exchange information between the theoretical and applied sciences as well as technical and technological implementations; —Promote communication and collaboration between the scientists, researchers and engineers of different nations, countries and continents. Among the major fields of interest are advanced and innovative materials with competitive characteristics, including mechanical, physical, chemical, biological, medical and thermal, properties and extreme dynamic strength. Their crystalline, nano - and micro-structures, phase transformations as well as details of their technological processes, tests and measurements are also in the focus of the ic-cmtp3 conference and the is-scbm1 and is-icm1 symposia. Multidisciplinary applications of material science and the technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industries, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance with the program of the ic-cmtp3 conference and is-icbm1 and is-icm1 symposia we have received more

  14. Effect of Weekend Admissions on the Treatment Process and Outcomes of Internal Medicine Patients

    PubMed Central

    Huang, Chun-Che; Huang, Yu-Tung; Hsu, Nin-Chieh; Chen, Jin-Shing; Yu, Chong-Jen

    2016-01-01

    Abstract Many studies address the effect of weekend admission on patient outcomes. This population-based study aimed to evaluate the relationship between weekend admission and the treatment process and outcomes of general internal medicine patients in Taiwan. A total of 82,340 patients (16,657 weekend and 65,683 weekday admissions) aged ≥20 years and admitted to the internal medicine departments of 17 medical centers between 2007 and 2009 were identified from the Taiwan National Health Insurance Research Database. A generalized estimating equation (GEE) analysis was used to compare patients admitted on weekends and those admitted on weekdays. Patients who were admitted on weekends were more likely to undergo intubation (odds ratio [OR]: 1.27; 95% confidence interval [CI]: 1.16–1.39; P < 0.001) and/or mechanical ventilation (OR, 1.25; 95% CI, 1.15–1.35; P < 0.001), cardio-pulmonary resuscitation (OR: 1.45; 95% CI: 1.05–2.01; P = 0.026), and be transferred to the intensive care unit (ICU) (OR: 1.16; 95% CI: 1.03–1.30; P = 0.015) compared with those admitted on weekdays. Weekend-admitted patients also had higher odds of in-hospital mortality (OR: 1.19; 95% CI: 1.09–1.30; P < 0.001) and hospital treatment cost (OR: 1.04; 95% CI: 1.01–1.06; P = 0.008) than weekday-admitted patients. General internal medicine patients who were admitted on weekends experienced more intensive care procedures and higher ICU admission, in-hospital mortality, and treatment cost. Intensive care utilization may serve as early indicator of poorer outcomes and a potential entry point to offer preventive intervention before proceeding to intensive treatment. PMID:26871788

  15. Intersecting Virtual Patients and Microbiology: Fostering a culture of learning

    PubMed Central

    O'Gorman, Ciaran; Gormley, Gerard

    2015-01-01

    Background The use and integration of Technology Enhanced Learning (TEL) resources in medical education has attracted considerable commentary and support. “Virtual Patients” are one such resource. Whilst evidence exists supporting the benefits of these resources, there has not been specific consideration of their implications for teaching microbiology; nor attention paid to both the internal and external factors that influence learner engagement with virtual patients. The principle aims of this study are to identify factors that explicitly and implicitly influence the student's interaction with a microbiology virtual patient resource and how these interactions reflect upon the use of the resource. Methods A mixed method quantitative (online questionnaire; n=161) and qualitative (student focus groups; N=11) study was undertaken amongst third year medical students enrolled at Queen's University Belfast in the academic year 2012 – 2013. Results The results supported prior evidence that virtual patients are a useful learning tool (mean score of 5.09 out of 7) that helped them to integrate microbiology principles with clinical experiences. How students used the virtual patients and the depth of the subsequent benefits was dependent upon their perception of the importance of the resource. This was influenced by a number of factors including how the resources were presented and positioned within the curriculum, whether they were formally examined or timetabled and the importance attributed by peers who had already completed the examinations. Conclusion Integration of virtual patients into the microbiology curriculum is widely endorsed and may even be considered superior to other methods of teaching. How students use these resources is dependent upon a positive perception of their importance. Educators should be aware of the factors that shape this perception when integrating TEL resources into curricula. PMID:26668421

  16. Evolution of International Space Station Program Safety Review Processes and Tools

    NASA Technical Reports Server (NTRS)

    Ratterman, Christian D.; Green, Collin; Guibert, Matt R.; McCracken, Kristle I.; Sang, Anthony C.; Sharpe, Matthew D.; Tollinger, Irene V.

    2013-01-01

    The International Space Station Program at NASA is constantly seeking to improve the processes and systems that support safe space operations. To that end, the ISS Program decided to upgrade their Safety and Hazard data systems with 3 goals: make safety and hazard data more accessible; better support the interconnection of different types of safety data; and increase the efficiency (and compliance) of safety-related processes. These goals are accomplished by moving data into a web-based structured data system that includes strong process support and supports integration with other information systems. Along with the data systems, ISS is evolving its submission requirements and safety process requirements to support the improved model. In contrast to existing operations (where paper processes and electronic file repositories are used for safety data management) the web-based solution provides the program with dramatically faster access to records, the ability to search for and reference specific data within records, reduced workload for hazard updates and approval, and process support including digital signatures and controlled record workflow. In addition, integration with other key data systems provides assistance with assessments of flight readiness, more efficient review and approval of operational controls and better tracking of international safety certifications. This approach will also provide new opportunities to streamline the sharing of data with ISS international partners while maintaining compliance with applicable laws and respecting restrictions on proprietary data. One goal of this paper is to outline the approach taken by the ISS Progrm to determine requirements for the new system and to devise a practical and efficient implementation strategy. From conception through implementation, ISS and NASA partners utilized a user-centered software development approach focused on user research and iterative design methods. The user-centered approach used on

  17. Microstructural Evaluation and Comparison of Solder Samples Processed Aboard the International Space Station

    NASA Technical Reports Server (NTRS)

    Grugel, R. N.; Hua, F.; Anilkumar, A. V.

    2008-01-01

    Samples from the In-Space Soldering Investigation (ISSI), conducted aboard the International Space Station (ISS), are being examined for post-solidification microstructural development and porosity distribution. In this preliminary study, the internal structures of two ISSI processed samples are compared. In one case 10cm of rosin-core solder was wrapped around a coupon wire and melted by conduction, whereas, in the other a comparable length of solder was melted directly onto the hot wire; in both cases the molten solder formed ellipsoidal blobs, a shape that was maintained during subsequent solidification. In the former case, there is clear evidence of porosity throughout the sample, and an accumulation of larger pores near the hot end that implies thermocapillary induced migration and eventual coalescence of the flux vapor bubbles. In the second context, when solder was fed onto the wire. a part of the flux constituting the solder core is introduced into and remains within the liquid solder ball, becoming entombed upon solidification. In both cases the consequential porosity, particularly at a solder/contact interface, is very undesirable. In addition to compromising the desired electrical and thermal conductivity, it promotes mechanical failure.

  18. Is Sustainable Remediation Now a Self-Sustaining Process? an International Progress Report

    NASA Astrophysics Data System (ADS)

    Smith, J. W. N.

    2014-12-01

    Sustainable remediation - the consideration of environmental, social and economic factors associated with soil and groundwater risk-management options, to help select the best overall solution - has been a rapidly evolving topic in recent years. The first published reference[1] to 'sustainable remediation' was in the title of a 1999 conference paper by Kearney et al., (1999), but activity really accelerated in the middle-late 2000's, with establishment of a number of collaborative sustainable remediation groups and fora, and increased publication rates in the peer reviewed literature (Fig 1). Figure 1. Journal paper publications with search term 'sustainable remediation' (SCOPUS survey, 17 July 2014) This presentation will review the international progress of sustainable remediation concept development and application in regulatory and corporate decision-making processes. It will look back at what has already been achieved, provide an update on the latest initiatives and developments, and look forward to what the future of sustainable remediation might look like. Specifically it will describe: Sustainable remediation frameworks: synergies and international collaboration; Latest guidance and tools developed by the various sustainable remediation organisations (SuRFs), including the SuRF-UK Best Management Practices and Tier 1 Briefcase; Best practice standard development by ASTM and ISO; Regulatory acceptance of sustainable remediation, including incorporation into legislation, and the NICOLE - Common Forum Joint statement on 'risk-informed and sustainable remediation' in Europe; Examples of corporate adoption of sustainable remediation principles. The presentation will conclude with a look forward to a vision of sustainable remediation in 2020.

  19. The Automated Clinical Microbiology Laboratory: Fact or Fantasy?

    PubMed Central

    2014-01-01

    Automated chemistry laboratories dependent on robotic processes are the standard in both academic and large community hospital settings. Diagnostic microbiology manufacturers are betting that robotics will be used for specimen processing, plate reading, and organism identification in the near future. These systems are highly complex and have large footprints and hefty price tags. However, they are touted as being more efficient, rapid, and accurate than standard processes. Certain features, such as image collection, are highly innovative. Hospital administrators may be swayed to institute these new systems because of the promise of the need for fewer skilled workers, higher throughput, and greater efficiency. They also may be swayed by the fact that workers with the requisite clinical microbiology skills are becoming more difficult to find, and this technology should allow fewer skilled workers to handle larger numbers of cultures. In this Point-Counterpoint, Nate Ledeboer, Medical Director, Clinical Microbiology and Molecular Diagnostics, Dynacare Laboratories, and Froedtert Hospital, Milwaukee, WI, will explain why he believes that this approach will become widespread, while Steve Dallas of the University of Texas Health Science Center San Antonio explains why he thinks that this automation may not become widely used. PMID:24648549

  20. Tuning algorithms for fractional order internal model controllers for time delay processes

    NASA Astrophysics Data System (ADS)

    Muresan, Cristina I.; Dutta, Abhishek; Dulf, Eva H.; Pinar, Zehra; Maxim, Anca; Ionescu, Clara M.

    2016-03-01

    This paper presents two tuning algorithms for fractional-order internal model control (IMC) controllers for time delay processes. The two tuning algorithms are based on two specific closed-loop control configurations: the IMC control structure and the Smith predictor structure. In the latter, the equivalency between IMC and Smith predictor control structures is used to tune a fractional-order IMC controller as the primary controller of the Smith predictor structure. Fractional-order IMC controllers are designed in both cases in order to enhance the closed-loop performance and robustness of classical integer order IMC controllers. The tuning procedures are exemplified for both single-input-single-output as well as multivariable processes, described by first-order and second-order transfer functions with time delays. Different numerical examples are provided, including a general multivariable time delay process. Integer order IMC controllers are designed in each case, as well as fractional-order IMC controllers. The simulation results show that the proposed fractional-order IMC controller ensures an increased robustness to modelling uncertainties. Experimental results are also provided, for the design of a multivariable fractional-order IMC controller in a Smith predictor structure for a quadruple-tank system.

  1. A Process and Outcomes Evaluation of the International AIDS Conference: Who Attends? Who Benefits Most?

    PubMed Central

    Lalonde, Bernadette; Wolvaardt, Jacqueline E.; Webb, Elize M; Tournas-Hardt, Amy

    2007-01-01

    The objective of the study was to conduct a process and outcomes evaluation of the International AIDS Conference (IAC). Reaction evaluation data are presented from a delegate survey distributed at the 2004 IAC held in Thailand. Input and output data from the Thailand IAC are compared to data from previous IACs to ascertain attendance and reaction trends, which delegates benefit most, and host country effects. Outcomes effectiveness data were collected via a survey and intercept interviews. Data suggest that the host country may significantly affect the number and quality of basic science IAC presentations, who attends, and who benefits most. Intended and executed HIV work-related behavior change was assessed under 9 classifications. Delegates who attended 1 previous IAC were more likely to report behavior changes than attendees who attended more than 1 previous IAC. The conference needs to be continually evaluated to elicit the required data to plan effective future IACs. PMID:17435615

  2. A Process and Outcomes Evaluation of the International AIDS Conference: Who Attends? Who Benefits Most?

    PubMed Central

    2007-01-01

    The objective of the study was to conduct a process and outcomes evaluation of the International AIDS Conference (IAC). Reaction evaluation data are presented from a delegate survey distributed at the 2004 IAC held in Thailand. Input and output data from the Thailand IAC are compared to data from previous IACs to ascertain attendance and reaction trends, which delegates benefit most, and host country effects. Outcomes effectiveness data were collected via a survey and intercept interviews. Data suggest that the host country may significantly affect the number and quality of basic science IAC presentations, who attends, and who benefits most. Intended and executed HIV work-related behavior change was assessed under 9 classifications. Delegates who attended 1 previous IAC were more likely to report behavior changes than attendees who attended more than 1 previous IAC. The conference needs to be continually evaluated to elicit the required data to plan effective future IACs. PMID:19825138

  3. Characteristics of pulsed internal inductively coupled plasma for next generation display processing.

    PubMed

    Kim, Tae Hyung; Lee, Seung Min; Lee, Chul Hee; Bae, Jeong Oun; Yeom, Geun Young; Kim, Kyong Nam

    2014-12-01

    RF pulsed plasma characteristics of inductively coupled plasma (ICP) sources operated with internal linear type antennas for the next generation display processing were investigated. By applying the rf pulse mode in the ICP source, with decreasing the rf pulse duty percentage, the average electron temperature was decreased and the plasma non-uniformity was improved with decreasing the rf pulse duty percentage. In the case of plasma uniformity, for the same time average rf power of 3 kW to the ICP source, the plasma non-uniformity was improved from 8.4% at 100% of rf duty percentage to 6.4% at 60% of rf duty percentage due to the increased diffusion of the plasma during the pulse-off time. When SiO2 was etched using CF4, the etch rate uniformity was also improved due to the improvement of plasma uniformity. PMID:25971107

  4. An Assessment of the International Space Station's Trace Contaminant Control Subassembly Process Economics

    NASA Technical Reports Server (NTRS)

    Perry J. L.; Cole, H. E.; El-Lessy, H. N.

    2005-01-01

    The International Space Station (ISS) Environmental Control and Life Support System includes equipment speci.cally designed to actively remove trace chemical contamination from the cabin atmosphere. In the U.S. on-orbit segment, this function is provided by the trace contaminant control subassembly (TCCS) located in the atmosphere revitalization subsystem rack housed in the laboratory module, Destiny. The TCCS employs expendable adsorbent beds to accomplish its function leading to a potentially signi.cant life cycle cost over the life of the ISS. Because maintaining the TCCSs proper can be logistically intensive, its performance in .ight has been studied in detail to determine where savings may be achieved. Details of these studies and recommendations for improving the TCCS s process economics without compromising its performance or crew health and safety are presented and discussed.

  5. Production of small uranium dioxide microspheres for cermet nuclear fuel using the internal gelation process

    SciTech Connect

    Collins, Robert T; Collins, Jack Lee; Hunt, Rodney Dale; Ladd-Lively, Jennifer L; Patton, Kaara K; Hickman, Robert

    2014-01-01

    The U.S. National Aeronautics and Space Administration (NASA) is developing a uranium dioxide (UO2)/tungsten cermet fuel for potential use as the nuclear cryogenic propulsion stage (NCPS). The first generation NCPS is expected to be made from dense UO2 microspheres with diameters between 75 and 150 m. Previously, the internal gelation process and a hood-scale apparatus with a vibrating nozzle were used to form gel spheres, which became UO2 kernels with diameters between 350 and 850 m. For the NASA spheres, the vibrating nozzle was replaced with a custom designed, two-fluid nozzle to produce gel spheres in the desired smaller size range. This paper describes the operational methodology used to make 3 kg of uranium oxide microspheres.

  6. Blow-by gas processing arrangement for automotive internal combustion engines

    SciTech Connect

    Anno, N.; Arai, T.

    1987-07-21

    This patent describes a blow-by gas processing arrangement for an internal combustion engine, comprising: a cylinder block having a chamber for collecting a blow-by gas, a blow-by gas passage communicating with the chamber, and spaced journal walls for supporting a crankshaft; a relatively large oil mist separating passage defined in the cylinder block and laterally extending into one of the journal walls beyond the blow-by gas passage. The oil mist separates passage communicating with the blow-by gas passage for preliminary separating an oil mist from the blow-by gas supplied from the chamber; an oil separator communicating with the oil mist separates passage for separating an oil mist from the blow-by gas supplied from the oil mist separating passage; and a PCV valve is connected to the oil mist separator; and an intake manifold connected to the PCV valve.

  7. Microbiological Spoilage of Acidified Specialty Products

    NASA Astrophysics Data System (ADS)

    Sperber, William H.

    Acidified specialty products or condiments are among the most microbiologically stable and safe food products. Often formulated, packaged, and distributed without heat treatments, they are microbiologically stable indefinitely at ambient temperatures in unopened containers. The packaged, acidified products are often intended for multiple uses, exposing them at the points of consumption to numerous opportunities for contamination with microorganisms. Nonetheless, they remain resistant to microbiological spoilage for many months, often under refrigerated conditions that are used to retard chemical reactions, flavor changes, and yeast growth.

  8. PREFACE: 6th International Workshop on Multi-Rate Processes and Hysteresis (MURPHYS2012)

    NASA Astrophysics Data System (ADS)

    Dimian, Mihai; Rachinskii, Dmitrii

    2015-02-01

    The International Workshop on Multi-Rate Processes and Hysteresis (MURPHYS) conference series focuses on multiple scale systems, singular perturbation problems, phase transitions and hysteresis phenomena occurring in physical, biological, chemical, economical, engineering and information systems. The 6th edition was hosted by Stefan cel Mare University in the city of Suceava located in the beautiful multicultural land of Bukovina, Romania, from May 21 to 24, 2012. This continued the series of biennial multidisciplinary conferences organized in Cork, Ireland from 2002 to 2008 and in Pécs, Hungary in 2010. The MURPHYS 2012 Workshop brought together more than 50 researchers in hysteresis and multi-scale phenomena from the United State of America, the United Kingdom, France, Germany, Italy, Ireland, Czech Republic, Hungary, Greece, Ukraine, and Romania. Participants shared and discussed new developments of analytical techniques and numerical methods along with a variety of their applications in various areas, including material sciences, electrical and electronics engineering, mechanical engineering and civil structures, biological and eco-systems, economics and finance. The Workshop was sponsored by the European Social Fund through Sectoral Operational Program Human Resources 2007-2013 (PRO-DOCT) and Stefan cel Mare University, Suceava. The Organizing Committee was co-chaired by Mihai Dimian from Stefan cel Mare University, Suceava (Romania), Amalia Ivanyi from the University of Pecs (Hungary), and Dmitrii Rachinskii from the University College Cork (Ireland). All papers published in this volume of Journal of Physics: Conference Series have been peer reviewed through processes administered by the Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing. The Guest Editors wish to place on record their sincere gratitude to Miss Sarah Toms for the assistance she provided

  9. Application of elements of microbiological risk assessment in the food industry via a tiered approach.

    PubMed

    van Gerwen, Suzanne J C; Gorris, Leon G M

    2004-09-01

    Food safety control is a matter for concern for all parts of the food supply chain, including governments that develop food safety policy, food industries that must control potential hazards, and consumers who need to keep to the intended use of the food. In the future, food safety policy may be set using the framework of risk analysis, part of which is the development of (inter)national microbiological risk assessment (MRA) studies. MRA studies increase our understanding of the impact of risk management interventions and of the relationships among subsequent parts of food supply chains with regard to the safety of the food when it reaches the consumer. Application of aspects of MRA in the development of new food concepts has potential benefits for the food industry. A tiered approach to applying MRA can best realize these benefits. The tiered MRA approach involves calculation of microbial fate for a product and process design on the basis of experimental data (e.g., monitoring data on prevalence) and predictive microbiological models. Calculations on new product formulations and novel processing technologies provide improved understanding of microbial fate beyond currently known boundaries, which enables identification of new opportunities in process design. The outcome of the tiered approach focuses on developing benchmarks of potential consumer exposure to hazards associated with new products by comparison with exposure associated with products that are already on the market and have a safe history of use. The tiered prototype is a tool to be used by experienced microbiologists as a basis for advice to product developers and can help to make safety assurance for new food concepts transparent to food inspection services. PMID:15453599

  10. Application of elements of microbiological risk assessment in the food industry via a tiered approach.

    PubMed

    van Gerwen, Suzanne J C; Gorris, Leon G M

    2004-09-01

    Food safety control is a matter for concern for all parts of the food supply chain, including governments that develop food safety policy, food industries that must control potential hazards, and consumers who need to keep to the intended use of the food. In the future, food safety policy may be set using the framework of risk analysis, part of which is the development of (inter)national microbiological risk assessment (MRA) studies. MRA studies increase our understanding of the impact of risk management interventions and of the relationships among subsequent parts of food supply chains with regard to the safety of the food when it reaches the consumer. Application of aspects of MRA in the development of new food concepts has potential benefits for the food industry. A tiered approach to applying MRA can best realize these benefits. The tiered MRA approach involves calculation of microbial fate for a product and process design on the basis of experimental data (e.g., monitoring data on prevalence) and predictive microbiological models. Calculations on new product formulations and novel processing technologies provide improved understanding of microbial fate beyond currently known boundaries, which enables identification of new opportunities in process design. The outcome of the tiered approach focuses on developing benchmarks of potential consumer exposure to hazards associated with new products by comparison with exposure associated with products that are already on the market and have a safe history of use. The tiered prototype is a tool to be used by experienced microbiologists as a basis for advice to product developers and can help to make safety assurance for new food concepts transparent to food inspection services.

  11. Clinical microbiology: Should microbiology be a clinical or a laboratory speciality?

    PubMed

    Bhattacharya, Sanjay

    2010-01-01

    Clinical microbiology is a specific combination of knowledge, attitude and practice aimed at direct clinical involvement in infectious disease management using the core principles of medical microbiology and clinical medicine. In this article certain areas in microbiology, where a more proactive approach could make a significant difference in clinical outcome has been delineated. The article reiterates the role of a medical microbiologist in a hospital setting. The practices described are the norm in well-organized hospitals. These areas include management of positive blood cultures, management of patients in intensive care units (ICUs), hospital infection control and public health microbiology, development of hospital and community anti-infective policy, organization of clinical-microbiological meetings and provision of emergency out-of-hours service. The implementation of this clinical approach and increased engagement with direct patient care would require changes in existing training structure and working patterns of medical and technical staffs in microbiology.

  12. Investigation of gas-phase decontamination of internally radioactively contaminated gaseous diffusion process equipment and piping

    SciTech Connect

    Bundy, R.D.; Munday, E.B.

    1991-01-01

    Construction of the gaseous diffusion plants (GDPs) was begun during World War 2 to produce enriched uranium for defense purposes. These plants, which utilized UF{sub 6} gas, were used primarily for this purpose through 1964. From 1959 through 1968, production shifted primarily to uranium enrichment to supply the nuclear power industry. Additional UF{sub 6}-handling facilities were built in feed and fuel-processing plants associated with the uranium enrichment process. Two of the five process buildings at Oak ridge were shut down in 1964. Uranium enrichment activities at Oak Ridge were discontinued altogether in 1985. In 1987, the Department of Energy (DOE) decided to proceed with a permanent shutdown of the Oak Ridge Gaseous Diffusion Plant (ORGDP). DOE intends to begin decommissioning and decontamination (D D) of ORGDP early in the next century. The remaining two GDPs are expected to be shut down during the next 10 to 40 years and will also require D D, as will the other UF{sub 6}-handling facilities. This paper presents an investigation of gas- phase decontamination of internally radioactively contaminated gaseous diffusion process equipment and piping using powerful fluorinating reagents that convert nonvolatile uranium compounds to volatile UF{sub 6}. These reagents include ClF{sub 3}, F{sub 2}, and other compounds. The scope of D D at the GDPs, previous work of gas-phase decontamination, four concepts for using gas-phase decontamination, plans for further study of gas-phase decontamination, and the current status of this work are discussed. 13 refs., 15 figs.

  13. Aphasia and Auditory Processing after Stroke through an International Classification of Functioning, Disability and Health Lens.

    PubMed

    Purdy, Suzanne C; Wanigasekara, Iruni; Cañete, Oscar M; Moore, Celia; McCann, Clare M

    2016-08-01

    Aphasia is an acquired language impairment affecting speaking, listening, reading, and writing. Aphasia occurs in about a third of patients who have ischemic stroke and significantly affects functional recovery and return to work. Stroke is more common in older individuals but also occurs in young adults and children. Because people experiencing a stroke are typically aged between 65 and 84 years, hearing loss is common and can potentially interfere with rehabilitation. There is some evidence for increased risk and greater severity of sensorineural hearing loss in the stroke population and hence it has been recommended that all people surviving a stroke should have a hearing test. Auditory processing difficulties have also been reported poststroke. The International Classification of Functioning, Disability and Health (ICF) can be used as a basis for describing the effect of aphasia, hearing loss, and auditory processing difficulties on activities and participation. Effects include reduced participation in activities outside the home such as work and recreation and difficulty engaging in social interaction and communicating needs. A case example of a young man (M) in his 30s who experienced a left-hemisphere ischemic stroke is presented. M has normal hearing sensitivity but has aphasia and auditory processing difficulties based on behavioral and cortical evoked potential measures. His principal goal is to return to work. Although auditory processing difficulties (and hearing loss) are acknowledged in the literature, clinical protocols typically do not specify routine assessment. The literature and the case example presented here suggest a need for further research in this area and a possible change in practice toward more routine assessment of auditory function post-stroke. PMID:27489401

  14. Students' perceptions of the admissions process for a program for internationally-trained dentists

    NASA Astrophysics Data System (ADS)

    King, Patricia Ann

    This study is designed to analyze the students' perceptions of the application process for a foreign-trained dental program. The goal was to add to the knowledge base the views of students who have experienced the application process of this type of program. Using a quantitative approach, the method of data collection was through a link to an online Likert survey which was emailed to graduates, first-year and second-year current students of the International Dental Studies (IDS) program at the University of the Pacific Arthur A. Dugoni School of Dentistry. Respondents were students who had experienced the IDS application process and had been accepted into the program. The study identified three topics: background, motivation and perception of fairness. The background information identified whether the participant was male/female and whether they were a current first-/second-year student or a graduate of the program. Motivation for applying was identified through questions about knowing someone who was in or had completed the program, and/or applied because of the program's reputation. Perception of fairness was determined by asking how the student felt about each required element of the process. By using structure based upon construct, which provides the researcher with a methodical review and configuration of the information, the study found that students had some views about application elements that, at times, conflicted with school's requirements. However, in general, the students felt the school was requiring the right elements for their application and were, therefore, basing their acceptance decisions on the correct requisites.

  15. International Scientific Conference on "Radiation-Thermal Effects and Processes in Inorganic Materials"

    NASA Astrophysics Data System (ADS)

    2015-04-01

    The International Scientific Conference on "Radiation-Thermal Effects and Processes in Inorganic Materials" is a traditional representative forum devoted to the discussion of fundamental problems of radiation physics and its technical applications. The first nine conferences were held four times in Tomsk, then in Ulan-Ude (Russia), Bishkek (Kyrgyzstan), Tashkent (Uzbekistan), Sharm El Sheikh (Egypt), and the island of Cyprus. The tenth conference was held in Tomsk, Russia. The program of the Conference covers a wide range of technical areas and modern aspects of radiation physics, its applications and related matters. Topics of interest include, but are not limited to: • Physical and chemical phenomena in inorganic materials in radiation, electrical and thermal fields; • Research methods and equipment modification states and properties of materials; • Technologies and equipment for their implementation; • The use of radiation-thermal processes in nanotechnology; • Adjacent to the main theme of the conference issues The conference was attended by leading scientists from countries near and far abroad who work in the field of radiation physics of solid state and of radiation material science. The School-Conference of Young Scientists was held during the conference. The event was held with the financial support of the Russian Foundation for Basic Research, projects No. 14-38-10210 and No. 14-02-20376.

  16. Studying Abroad: Developing a Model for the Decision Process of International Students

    ERIC Educational Resources Information Center

    Branco Oliveira, Diana; Soares, Ana Maria

    2016-01-01

    Attracting international students is increasingly important for higher education institutions. In order to contribute to the understanding of how international students choose a university, we conducted a qualitative study in a public university in the north of Portugal. Results show that students seek an international experience mainly for…

  17. Microbiology in Schools Advisory Committee (MISAC)

    ERIC Educational Resources Information Center

    Bainbridge, B. W.

    1972-01-01

    Summarizes the work of the committee, lists its membership, and provides the addresses of (English) suppliers of microbiological equipment and (British) sources of microbial cultures, including bacteria, fungi, and freshwater plankton. (AL)

  18. Experiments with Writing to Teach Microbiology.

    ERIC Educational Resources Information Center

    Cannon, Robert E.

    1990-01-01

    Described are the experiences of one teacher with the teaching of writing in college level microbiology, virology, and immunology courses. Assignments, methods, evaluation, and student responses are discussed. (CW)

  19. "We-Research": Adopting a Wiki to Support the Processes of Collaborative Research among a Team of International Researchers

    ERIC Educational Resources Information Center

    Young, Susan; Perez, Jessica

    2012-01-01

    This article discusses the adoption of a wiki to support the processes of collaborative research between members of an international team involved in the project MyPlace: MyMusic. The focus is on how new technological communications, here specifically the wiki, can enable and transform the methods and processes of research. We propose two main…

  20. 8. annual international energy week conference and exhibition: Conference papers. Book 2: Pipelines, terminals and storage; Processing and refining

    SciTech Connect

    1997-05-01

    This volume contains 37 papers arranged in the following topical sections: Pipeline integrity; Risk management and assessment; Pipeline simulation; Nondestructive examination; New technology and research; Internal corrosion; Cathodic protection; Operational pigging; Pipeline and leak detection; Intelligent pigging; Above ground storage tanks; Gasification; Custom catalyst manufacturing; Petrochemicals; and Gas processing. Papers have been processed separately for inclusion on the database.

  1. Disinfection Processes.

    PubMed

    Munakata, Naoko; Kuo, Jeff

    2016-10-01

    A review of the literature published in 2015 on topics relating to disinfection processes is presented. This review is divided into the following sections: disinfection methods, disinfection byproducts, and microbiology and microbial communities. PMID:27620087

  2. PREFACE: 3rd International Workshop on Materials Analysis and Processing in Magnetic Fields (MAP3)

    NASA Astrophysics Data System (ADS)

    Sakka, Yoshio; Hirota, Noriyuki; Horii, Shigeru; Ando, Tsutomu

    2009-07-01

    The 3rd International Workshop on Materials Analysis and Processing in Materials Fields (MAP3) was held on 14-16 May 2008 at the University of Tokyo, Japan. The first was held in March 2004 at the National High Magnetic Field Laboratory in Tallahassee, USA. Two years later the second took place in Grenoble, France. MAP3 was held at The University of Tokyo International Symposium, and jointly with MANA Workshop on Materials Processing by External Stimulation, and JSPS CORE Program of Construction of the World Center on Electromagnetic Processing of Materials. At the end of MAP3 it was decided that the next MAP4 will be held in Atlanta, USA in 2010. Processing in magnetic fields is a rapidly expanding research area with a wide range of promising applications in materials science. MAP3 focused on the magnetic field interactions involved in the study and processing of materials in all disciplines ranging from physics to chemistry and biology: Magnetic field effects on chemical, physical, and biological phenomena Magnetic field effects on electrochemical phenomena Magnetic field effects on thermodynamic phenomena Magnetic field effects on hydrodynamic phenomena Magnetic field effects on crystal growth Magnetic processing of materials Diamagnetic levitation Magneto-Archimedes effect Spin chemistry Application of magnetic fields to analytical chemistry Magnetic orientation Control of structure by magnetic fields Magnetic separation and purification Magnetic field-induced phase transitions Materials properties in high magnetic fields Development of NMR and MRI Medical application of magnetic fields Novel magnetic phenomena Physical property measurement by Magnetic fields High magnetic field generation> MAP3 consisted of 84 presentations including 16 invited talks. This volume of Journal of Physics: Conference Series contains the proceeding of MAP3 with 34 papers that provide a scientific record of the topics covered by the conference with the special topics (13 papers) in

  3. Dissecting microbiological systems using materials science.

    PubMed

    Muralimohan, Abishek; Eun, Ye-Jin; Bhattacharyya, Basudeb; Weibel, Douglas B

    2009-03-01

    Materials science offers microbiologists a wide variety of organic and inorganic materials with chemical and physical properties that can be precisely controlled. These materials present new capabilities for isolating, manipulating and studying bacteria and other microorganisms and are poised to transform microbiology. This review summarizes three classes of materials that span a range of length scales (nano, micro and meso) and describes a variety of fundamental questions in microbiology that can be studied by leveraging their properties.

  4. PREFACE: 2nd International Conference on Competitive Materials and Technological Processes (IC-CMTP2)

    NASA Astrophysics Data System (ADS)

    László, Gömze A.

    2013-12-01

    Competitiveness is one of the most important factors in our life and it plays a key role in the efficiency both of organizations and societies. The more scientifically supported and prepared organizations develop more competitive materials with better physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Competitive Materials and Technology Processes (ic-cmtp2) are the following: Promote new methods and results of scientific research in the fields of material, biological, environmental and technology sciences; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication between the scientist of different nations, countries and continents. Among the major fields of interest are materials with extreme physical, chemical, biological, medical, thermal, mechanical properties and dynamic strength; including their crystalline and nano-structures, phase transformations as well as methods of their technological processes, tests and measurements. Multidisciplinary applications of materials science and technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industry, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance to the program of the conference ic-cmtp2, more than 250 inquiries and registrations from different organizations were received. Researchers from 36 countries in Asia, Europe, Africa, North and South America arrived at the venue of conference. Including co-authors, the research work of more than 500 scientists are presented in this volume. Professor Dr Gömze A László Chair, ic-cmtp2 The PDF also contains lists of the boards, session chairs and sponsors.

  5. Internal models of self-motion: computations that suppress vestibular reafference in early vestibular processing.

    PubMed

    Cullen, Kathleen E; Brooks, Jessica X; Jamali, Mohsen; Carriot, Jerome; Massot, Corentin

    2011-05-01

    In everyday life, vestibular sensors are activated by both self-generated and externally applied head movements. The ability to distinguish inputs that are a consequence of our own actions (i.e., active motion) from those that result from changes in the external world (i.e., passive or unexpected motion) is essential for perceptual stability and accurate motor control. Recent work has made progress toward understanding how the brain distinguishes between these two kinds of sensory inputs. We have performed a series of experiments in which single-unit recordings were made from vestibular afferents and central neurons in alert macaque monkeys during rotation and translation. Vestibular afferents showed no differences in firing variability or sensitivity during active movements when compared to passive movements. In contrast, the analyses of neuronal firing rates revealed that neurons at the first central stage of vestibular processing (i.e., in the vestibular nuclei) were effectively less sensitive to active motion. Notably, however, this ability to distinguish between active and passive motion was not a general feature of early central processing, but rather was a characteristic of a distinct group of neurons known to contribute to postural control and spatial orientation. Our most recent studies have addressed how vestibular and proprioceptive inputs are integrated in the vestibular cerebellum, a region likely to be involved in generating an internal model of self-motion. We propose that this multimodal integration within the vestibular cerebellum is required for eliminating self-generated vestibular information from the subsequent computation of orientation and posture control at the first central stage of processing.

  6. PREFACE: MCWASP XIII: International Conference on Modeling of Casting, Welding and Advanced Solidification Processes

    NASA Astrophysics Data System (ADS)

    Ludwig, Andreas

    2012-07-01

    Due to fast-paced development in computer technologies during the last three decades, computer-based process modeling has become an important tool for the improvement of existing process technologies and the development of new, innovative technologies. With the help of numerical process simulations, complex and costly experimental trials can now be reduced to a minimum. For metallurgical processes in particular, computer simulations are of outstanding importance, as the flow and solidification of molten alloys or the formation of microstructure and defects can hardly be observed experimentally. Corresponding computer simulations allow us inside views into the key process phenomena and so offer great potential for optimization. In 1980 the conference series 'Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP)' was started up, and has now been continued by holding the 13th international conference on 'Modeling of Casting, Welding and Advanced Solidification Processes', MCWASP XIII, in Schladming, Austria, from June 17-22 2012. Around 200 scientists from industry and academia, coming from 20 countries around the globe attended 78 oral and 50 poster presentations on different aspects of solidification-related modeling topics. Besides process-related sessions such as (i) Ingot and Shape Casting, (ii) Continuous Casting and Direct Chill Casting, (iii) Directional Solidification and Zone Melting, (iv) Welding, and (v) Centrifugal Casting, a larger focus was put on (vi) Experimental Investigation and In-Situ Observations. In recent years, this topic has been significantly strengthened as advanced synchrotron technologies allow fantastic in-situ observations of phenomena happening inside small metallic samples. These observations will definitely serve as a benchmark for the modeling community. Further macroscopic aspects of advanced solidification science were tackled in the sessions (vii) Electromagnetic Coupling, (viii) Thermomechanics, (ix

  7. Internal water ocean on Titan: Place for prebiological and biological processes

    NASA Astrophysics Data System (ADS)

    Simakov, Michael B.

    Titan's rocks. Even a very gentle extraction of a sample of the meteorite (4 days at 20 C) yields a large essential inorganic components, such as PO4 3- , SO4 2- , Cl- , Ca2+ , Mg2+ , Na+ , K+ as well as organic matter. So, an aqueous weathering would release nutrients to fluid where they would be available to microorganisms. The temperatures of Titan's ocean could have been relatively warm and all conditions inside liquid body seem compatible with the emergence and sustaining of life. Recent attempts to establish a lower limit for the time required for emergence of life suggest that 10-100 million years was enough in case of Earth. The existence time of the Titan's juvenile ocean was enough for arising of the first protoliving objects. All requirements needed for exobiology — liquid water which exists within long geological period, complex organic and inorganic chemistry and energy sources for support of biological processes are on Saturnian moon. The putative internal water ocean along with complex atmospheric photochemistry provide some exobiological niches on this body: (1) an upper layer of the internal water ocean; (2) pores, veins, channels and pockets filled with brines inside of the lowest part of the icy layer; (3) the places of cryogenic volcanism; (4) set of caves in icy layer connecting with cryovolcanic processes; (5) the brine-filled cracks in icy crust caused by tidal forces; (6) liquid water pools on the surface originated from meteoritic strikes; (7) the sites of hydrothermal activity on the bottom of the ocean. Possible metabolic processes, such as nitrate/nitrite reduction, sulfate reduction and methanogenesis could be suggested for Titan's biochemistry.

  8. Microbiological consequences of indoor composting.

    PubMed

    Naegele, A; Reboux, G; Vacheyrou, M; Valot, B; Millon, L; Roussel, S

    2016-08-01

    Recycling of organic waste appeals to more and more people. The aim of this study was to evaluate the microbiological contamination around organic waste bins at three distances over a 12-month period. Contamination near the customary trash of control households was evaluated at the beginning to ensure that there is no recruitment bias. Air samples using the MAS 100 impactor were carried out in 38 dwellings that do household waste composting and in 10 dwellings of controls. Collection of particles by CIP 10 rotating cup sampler and dust samples collected by electrostatic dust collector cloths were acquired in dwellings that do household waste composting. Samples were analyzed by culture and by real-time quantitative PCR. Information about dwelling characteristics and inhabitant practices was obtained by a standardized questionnaire. The genera most often isolated were Penicillium, Aspergillus, Cladosporium and Streptomyces. Near the organic waste bins, bioaerosol samples showed an increase of Acarus siro (P = 0.001). Sedimented dust analyses highlighted an increase of A. siro, Wallemia sebi, Aspergillus versicolor, and Cladosporium sphaerospermum concentrations after a 12-month survey compared to the beginning. Composting favors microorganism development over time, but does not seem to have an effect on the bioaerosol levels and the surface microbiota beyond 0.5 m from the waste bin.

  9. Proceedings of the U.S. Geological Survey Interdisciplinary Microbiology Workshop, Estes Park, Colorado, October 15-17, 2008

    USGS Publications Warehouse

    : Briggs, Kay Marano

    2010-01-01

    Preface A U.S. Geological Survey Interdisciplinary Microbiology Workshop was held in Estes Park, Colorado, on October 15-17, 2008. Participants came from all USGS regions and disciplines. This report contains abstracts from 36 presentations and 35 poster sessions and notes from 5 breakout sessions. The seven presentation topics follow: Ecology of wildlife and fish disease Mechanisms of fish and wildlife disease Microbial ecology Geographic patterns/visualization Public health and water quality Geomicrobiology Ecosystem function The six poster session topics follow: Wildlife disease Disease detection methods Water quality Microbial ecology Metabolic processes Tools and techniques Five working groups met in breakout sessions on October 16, 2008. The highlights for each working group are summarized in this report, and their goals are listed below: Working Group I: to plan a Fact Sheet on interdisciplinary microbiology in the USGS Working Group II: to plan a USGS interdisciplinary microbiology Web site Working Group III: to suggest ways to broadcast and publicize the types of microbiology conducted at the USGS Working Group IV: to identify emerging issues in USGS interdisciplinary microbiology research Working Group V: to identify potential opportunities for interdisciplinary microbiology work at the USGS After the workshop, the USGS interdisciplinary microbiology Web site was activated in June 2009 at http://microbiology.usgs.gov/.

  10. Microbial Biotechnology 2020; microbiology of fossil fuel resources.

    PubMed

    Head, Ian M; Gray, Neil D

    2016-09-01

    This roadmap examines the future of microbiology research and technology in fossil fuel energy recovery. Globally, the human population will be reliant on fossil fuels for energy and chemical feedstocks for at least the medium term. Microbiology is already important in many areas relevant to both upstream and downstream activities in the oil industry. However, the discipline has struggled for recognition in a world dominated by geophysicists and engineers despite widely known but still poorly understood microbially mediated processes e.g. reservoir biodegradation, reservoir souring and control, microbial enhanced oil recovery. The role of microbiology is even less understood in developing industries such as shale gas recovery by fracking or carbon capture by geological storage. In the future, innovative biotechnologies may offer new routes to reduced emissions pathways especially when applied to the vast unconventional heavy oil resources formed, paradoxically, from microbial activities in the geological past. However, despite this potential, recent low oil prices may make industry funding hard to come by and recruitment of microbiologists by the oil and gas industry may not be a high priority. With regards to public funded research and the imperative for cheap secure energy for economic growth in a growing world population, there are signs of inherent conflicts between policies aimed at a low carbon future using renewable technologies and policies which encourage technologies which maximize recovery from our conventional and unconventional fossil fuel assets.

  11. [EPIDEMIOLOGICAL, CLINICAL AND MICROBIOLOGICAL FINDINGS IN WOMEN WITH AEROBIC VAGINITIS].

    PubMed

    Dermendjiev, T; Pehlivanov, B; Hadjieva, K; Stanev, S

    2015-01-01

    Aerobic vaginitis (AV) is an alterarion of the normal lactobacillic flora accompanied by signs of inflammation, presence of mainly aerobic microorganisms from intestinal commensals or other aerobic pathogens. Clinical symptoms may vary by type and intensity and are marked by a high tendency for recurrence and chronification. Inflammation and ulcerations in AV could increase the risk of contracting HIV or other sexually transmitted infections. The aim is to study some epidemiological, clinical and microbiological features of the aerobic vaginitis in patients of the specialized Obstetric and Gynecological Clinic in Plovdiv, Bulgaria. In a retrospective research 4687 vaginal smears have been gathered in Microbiological laboratory at "St. George" Hospital - Plovdiv. We used clinical, microbiological and statistical methods. Information processing is performed by variation, alternative, correlation and graphical analysis using specialized package SPSS v13.0. The overall prevalence rate of AV in the studied population is 11.77%. The levels of prevalence of AV in pregnant and non-pregnant women are respectively 13.08% and 4.34%. The highest frequency of AV is in the age group 21-30 years (32.3%). The results show a marked association between Escherichia coli and the cases of AV (p < 0.001). AV is a common cause of vaginal symptoms in patients of specialized ambulatory outpatient. One in ten women with vaginal complaints suffers from AV Streptococcus agalactiae and Escherichia coli are most often isolated aerobic microorganisms. PMID:26863788

  12. Microbial Biotechnology 2020; microbiology of fossil fuel resources.

    PubMed

    Head, Ian M; Gray, Neil D

    2016-09-01

    This roadmap examines the future of microbiology research and technology in fossil fuel energy recovery. Globally, the human population will be reliant on fossil fuels for energy and chemical feedstocks for at least the medium term. Microbiology is already important in many areas relevant to both upstream and downstream activities in the oil industry. However, the discipline has struggled for recognition in a world dominated by geophysicists and engineers despite widely known but still poorly understood microbially mediated processes e.g. reservoir biodegradation, reservoir souring and control, microbial enhanced oil recovery. The role of microbiology is even less understood in developing industries such as shale gas recovery by fracking or carbon capture by geological storage. In the future, innovative biotechnologies may offer new routes to reduced emissions pathways especially when applied to the vast unconventional heavy oil resources formed, paradoxically, from microbial activities in the geological past. However, despite this potential, recent low oil prices may make industry funding hard to come by and recruitment of microbiologists by the oil and gas industry may not be a high priority. With regards to public funded research and the imperative for cheap secure energy for economic growth in a growing world population, there are signs of inherent conflicts between policies aimed at a low carbon future using renewable technologies and policies which encourage technologies which maximize recovery from our conventional and unconventional fossil fuel assets. PMID:27506422

  13. Interpretation of Blood Microbiology Results - Function of the Clinical Microbiologist.

    PubMed

    Kristóf, Katalin; Pongrácz, Júlia

    2016-04-01

    The proper use and interpretation of blood microbiology results may be one of the most challenging and one of the most important functions of clinical microbiology laboratories. Effective implementation of this function requires careful consideration of specimen collection and processing, pathogen detection techniques, and prompt and precise reporting of identification and susceptibility results. The responsibility of the treating physician is proper formulation of the analytical request and to provide the laboratory with complete and precise patient information, which are inevitable prerequisites of a proper testing and interpretation. The clinical microbiologist can offer advice concerning the differential diagnosis, sampling techniques and detection methods to facilitate diagnosis. Rapid detection methods are essential, since the sooner a pathogen is detected, the better chance the patient has of getting cured. Besides the gold-standard blood culture technique, microbiologic methods that decrease the time in obtaining a relevant result are more and more utilized today. In the case of certain pathogens, the pathogen can be identified directly from the blood culture bottle after propagation with serological or automated/semi-automated systems or molecular methods or with MALDI-TOF MS (matrix-assisted laser desorption-ionization time of flight mass spectrometry). Molecular biology methods are also suitable for the rapid detection and identification of pathogens from aseptically collected blood samples. Another important duty of the microbiology laboratory is to notify the treating physician immediately about all relevant information if a positive sample is detected. The clinical microbiologist may provide important guidance regarding the clinical significance of blood isolates, since one-third to one-half of blood culture isolates are contaminants or isolates of unknown clinical significance. To fully exploit the benefits of blood culture and other (non- culture

  14. Interpretation of Blood Microbiology Results - Function of the Clinical Microbiologist.

    PubMed

    Kristóf, Katalin; Pongrácz, Júlia

    2016-04-01

    The proper use and interpretation of blood microbiology results may be one of the most challenging and one of the most important functions of clinical microbiology laboratories. Effective implementation of this function requires careful consideration of specimen collection and processing, pathogen detection techniques, and prompt and precise reporting of identification and susceptibility results. The responsibility of the treating physician is proper formulation of the analytical request and to provide the laboratory with complete and precise patient information, which are inevitable prerequisites of a proper testing and interpretation. The clinical microbiologist can offer advice concerning the differential diagnosis, sampling techniques and detection methods to facilitate diagnosis. Rapid detection methods are essential, since the sooner a pathogen is detected, the better chance the patient has of getting cured. Besides the gold-standard blood culture technique, microbiologic methods that decrease the time in obtaining a relevant result are more and more utilized today. In the case of certain pathogens, the pathogen can be identified directly from the blood culture bottle after propagation with serological or automated/semi-automated systems or molecular methods or with MALDI-TOF MS (matrix-assisted laser desorption-ionization time of flight mass spectrometry). Molecular biology methods are also suitable for the rapid detection and identification of pathogens from aseptically collected blood samples. Another important duty of the microbiology laboratory is to notify the treating physician immediately about all relevant information if a positive sample is detected. The clinical microbiologist may provide important guidance regarding the clinical significance of blood isolates, since one-third to one-half of blood culture isolates are contaminants or isolates of unknown clinical significance. To fully exploit the benefits of blood culture and other (non- culture

  15. Process for Upgrading Cognitive Assessment Capabilities Onboard the International Space Station

    NASA Technical Reports Server (NTRS)

    Picano, J. J.; Seaton, K. A.; Holland, A. W.

    2016-01-01

    MOTIVATION: Spaceflight poses varied and unique risks to the brain and cognitive functioning including radiation exposure, sleep disturbance, fatigue, fluid shifts (increased intracranial pressure), toxin exposure, elevated carbon dioxide, and traumatic brain injury, among others. These potential threats to cognitive functioning are capable of degrading performance and compromising mission success. Furthermore, the threats may increase in severity, and new types of threats may emerge for longer duration exploration missions. This presentation will describe the process used to identify gaps in our current approach, evaluate best practices in cognitive assessment, and transition new cognitive assessment tools to operational use. OVERVIEW: Risks to brain health and performance posed by spaceflight missions require sensitive tools to assess cognitive functioning of astronauts in flight. The Spaceflight Cognitive Assessment Tool for Windows (WinSCAT) is the automated cognitive assessment tool currently deployed onboard the International Space Station (ISS). WinSCAT provides astronauts and flight surgeons with objective data to monitor neurocognitive functioning. WinSCAT assesses 5 discrete cognitive domains, is sensitive to changes in cognitive functioning, and was designed to be completed in less than 15 minutes. However, WinSCAT does not probe other areas of cognitive functioning that might be important to mission success. Researchers recently have developed batteries that may expand current capabilities, such as increased sensitivity to subtle fluctuations in cognitive functioning. Therefore, we engaged in a systematic process review in order to improve upon our current capabilities and incorporate new advances in cognitive assessment. This process included a literature review on newer measures of neurocognitive assessment, surveys of operational flight surgeons at NASA regarding needs and gaps in our capabilities, and expert panel review of candidate cognitive

  16. The microbiology of apples and apple products.

    PubMed

    Doores, S

    1983-01-01

    The apple industry has reached an annual production level of 8.5 billion pounds. CA storage of 25% of this crop has enabled a fresh market on a year-round basis. To achieve high quality in raw fruit and processed apple products, careful attention must be paid to maintaining a microbiologically stable environment. The ecology of the microflora associated with the apple is a reflection of the orchard, handling, harvesting, and storage practices. Yeasts predominate on orchard fruit, molds may become a storage problem, and bacteria cause spoilage, off flavors, and loss of quality in juice products. Despite the microbial problems inherent in producing of quality product, the apple industry is faced with the occurrence of patulin. Patulin, a mycotoxin produced by Penicillium and Aspergillus species, has been associated with damaged fruit. Decreased temperatures, coupled with CA storage; can deter mold growth and patulin production. Laboratory detection methods for derivations of patulin are able to detect microgram quantities. Means to eliminate patulin formed in apple products include addition of ascorbate and SO2, extending fermentation, or charcoal filtering. However, degradation products of patulin have not been evaluated toxicologically.

  17. Microbiology and Moisture Uptake of Desert Soils

    NASA Astrophysics Data System (ADS)

    Kress, M. E.; Bryant, E. P.; Morgan, S. W.; Rech, S.; McKay, C. P.

    2005-12-01

    We have initiated an interdisciplinary study of the microbiology and water content of desert soils to better understand microbial activity in extreme arid environments. Water is the one constituent that no organism can live without; nevertheless, there are places on Earth with an annual rainfall near zero that do support microbial ecosystems. These hyperarid deserts (e.g. Atacama and the Antarctic Dry Valleys) are the closest terrestrial analogs to Mars, which is the subject of future exploration motivated by the search for life beyond Earth. We are modeling the moisture uptake by soils in hyperarid environments to quantify the environmental constraints that regulate the survival and growth of micro-organisms. Together with the studies of moisture uptake, we are also characterizing the microbial population in these soils using molecular and culturing methods. We are in the process of extracting DNA from these soils using MoBio extraction kits. This DNA will be used as a template to amplify bacterial and eukaryotic ribosomal DNA to determine the diversity of the microbial population. We also have been attempting to determine the density of organisms by culturing on one-half strength R2A agar. The long-range goal of this research is to identify special adaptations of terrestrial life that allow them to inhabit extreme arid environments, while simultaneously quantifying the environmental parameters that enforce limits on these organisms' growth and survival.

  18. Microbiology and Treatment of Acute Apical Abscesses

    PubMed Central

    Rôças, Isabela N.

    2013-01-01

    SUMMARY Acute apical abscess is the most common form of dental abscess and is caused by infection of the root canal of the tooth. It is usually localized intraorally, but in some cases the apical abscess may spread and result in severe complications or even mortality. The reasons why dental root canal infections can become symptomatic and evolve to severe spreading and sometimes life-threatening abscesses remain elusive. Studies using culture and advanced molecular microbiology methods for microbial identification in apical abscesses have demonstrated a multispecies community conspicuously dominated by anaerobic bacteria. Species/phylotypes commonly found in these infections belong to the genera Fusobacterium, Parvimonas, Prevotella, Porphyromonas, Dialister, Streptococcus, and Treponema. Advances in DNA sequencing technologies and computational biology have substantially enhanced the knowledge of the microbiota associated with acute apical abscesses and shed some light on the etiopathogeny of this disease. Species richness and abundance and the resulting network of interactions among community members may affect the collective pathogenicity and contribute to the development of acute infections. Disease modifiers, including transient or permanent host-related factors, may also influence the development and severity of acute abscesses. This review focuses on the current evidence about the etiology and treatment of acute apical abscesses and how the process is influenced by host-related factors and proposes future directions in research, diagnosis, and therapeutic approaches to deal with this disease. PMID:23554416

  19. Strata-1: An International Space Station Experiment into Fundamental Regolith Processes in Microgravity

    NASA Technical Reports Server (NTRS)

    Fries, M.; Abell, P.; Brisset, J.; Britt, D.; Colwell, J.; Durda, D.; Dove, A.; Graham, L.; Hartzell, C.; John, K.; Love, S.

    2016-01-01

    The Strata-1 experiment will study the evolution of asteroidal regolith through long-duration exposure of simulant materials to the microgravity environment on the International Space Station (ISS). Many asteroids feature low bulk densities, which implies high values of porosity and a mechanical structure composed of loosely bound particles, (i.e. the "rubble pile" model), a prime example of a granular medium. Even the higher-density, mechanically coherent asteroids feature a significant surface layer of loose regolith. These bodies are subjected to a variety of forces and will evolve in response to very small perturbations such as micrometeoroid impacts, planetary flybys, and the YORP effect. Our understanding of this dynamical evolution and the inter-particle forces involved would benefit from long-term observations of granular materials exposed to small vibrations in microgravity. A detailed understanding of asteroid mechanical evolution is needed in order to predict the surface characteristics of as-of-yet unvisited bodies, to understand the larger context of samples collected by missions such as OSIRIS-REx and Hayabusa 1 and 2, and to mitigate risks for both manned and unmanned missions to asteroidal bodies. Understanding regolith dynamics will inform designs of how to land and set anchors, safely sample/move material on asteroidal surfaces, process large volumes of material for in situ resource utilization (ISRU) purposes, and, in general, predict behavior of large and small particles on disturbed asteroid surfaces.

  20. PREFACE: Third International Conference on Advances in Solidification Processes (ICASP - 3)

    NASA Astrophysics Data System (ADS)

    Zimmermann, Gerhard; Ratke, Lorenz

    2012-01-01

    The 3rd International Conference on Advances in Solidification Processes was held in the Rolduc Abbey in the Netherlands a few kilometres away from Aachen. Around 200 scientists from 24 countries come in for the four day meeting. They found a stimulating but also relaxing environment and atmosphere, with beautiful weather and the medieval abbey inviting for walks, discussions, sitting outside and drinking a beer or wine. The contributions given at the conference reflected recent advances in various topics of solidification processes, ranging from fundamental aspects to applied casting technologies. In 20 oral sessions and a large poster session innovative results of segregation phenomena, microstructure evolution, nucleation and growth, phase formation, polyphase solidification, rapid solidification and welding, casting technology, thermophysics of molten alloys, solidification with forced melt flow and growth of single crystals and superalloys together with innovative diagnostic techniques were presented. Thereby, findings from experiments as well as from numerical modeling on different lengths scales were jointly discussed and contribute to new insight in solidification behaviour. The papers presented in this open access proceedings cover about half the oral and poster presentations given. They were carefully reviewed as in classical peer reviewed journals by two independent referees and most of them were revised and thus improved according to the reviewers comments. We think that this collection of papers presented at ICASP-3 gives an impression of the excellent contributions made. The papers embrace both the basic and applied aspects of solidification. We especially wish to express our appreciation for the team around Georg Schmitz and Margret Nienhaus organising this event and giving us their valued advice and support at every stage in preparing the conference. We also thank Lokasenna Lektorat for taking the task of checking all language-associated issues and

  1. Bubble Formation and Transport during Microgravity Materials Processing: Model Experiments on the International Space Station

    NASA Technical Reports Server (NTRS)

    Grugel, R. N.; Anilkumar, A. V.; Lee, C. P.

    2003-01-01

    Flow Visualization experiments on the controlled melting and solidification of succinonitrile were conducted in the glovebox facility of the International Space Station (ISS). The experimental samples were prepared on ground by filling glass tubes, 1 cm ID and approximately 30 cm in length, with pure succinonitrile (SCN) under 450 millibar of nitrogen. Porosity in the samples arose from natural shrinkage, and in some cases by direct insertion of nitrogen bubbles, during solidification of the liquid SCN. The samples were processed in the Pore Formation and Mobility Investigation (PFMI) apparatus that is placed in the glovebox facility (GBX) aboard the ISS. Experimental processing parameters of temperature gradient and translation speed, as well as camera settings, were remotely monitored and manipulated from the ground Telescience Center (TSC) at the Marshall Space Flight Center. During the experiments, the sample is first subjected to a unidirectional melt back, generally at 10 microns per second, with a constant temperature gradient ahead of the melting interface. The temperatures in the sample are monitored by six in situ thermocouples. Real time visualization of the controlled directional melt back shows bubbles of different sizes initiating at the melt interface and, upon dislodging from the melting solid, migrating at different speeds into the temperature field ahead of them, before coming to rest. The thermocapillary flow field set up in the melt, ahead of the interface, is dramatic in the context of the large bubbles, and plays a major role in dislodging the bubble. A preliminary analysis of the observed bubble formation and mobility during melt back and its implication to future microgravity experiments is presented and discussed.

  2. [The journal of the Spanish Society of Microbiology, 1945-1995].

    PubMed

    Isamat, D; Navarrete, A; Fernández de Castillo, A

    1996-03-01

    The official journal of the Spanish Society for Microbiology (SEM) was first published in 1947, under the name Microbiología Española. Until 1984 the journal was published by the SEM jointly with the Institute (from the National Research Council, CSIC). In 1985 SEM started by itself to publish a new journal named Microbiología SEM, which may be considered the continuation of the former. From 1985 on the journal has increased both the quality and variety of its articles. At the beginning, most articles were in Spanish. Gradually, articles in English have been majority, to increase international readership. Currently the journal is published quarterly, with more than 500 pages per year.

  3. Developing an Undergraduate International Business Program: Context, Rationale, Process and Focus

    ERIC Educational Resources Information Center

    Bell, Jim; Gray, Brendan; McNaughton, Rod

    2003-01-01

    This paper discusses the recent development of a new undergraduate international business program at the University of Otago in New Zealand. Firstly, it describes the context of the initiative in terms of the New Zealand business environment, the university sector in New Zealand and recent global trends in international business education.…

  4. Kennedy Space Center, Space Shuttle Processing, and International Space Station Program Overview

    NASA Technical Reports Server (NTRS)

    Higginbotham, Scott Alan

    2011-01-01

    Topics include: International Space Station assembly sequence; Electrical power substation; Thermal control substation; Guidance, navigation and control; Command data and handling; Robotics; Human and robotic integration; Additional modes of re-supply; NASA and International partner control centers; Space Shuttle ground operations.

  5. Comprehensive Representation of Hydrologic and Geomorphic Process Coupling in Numerical Models: Internal Dynamics and Basin Evolution

    NASA Astrophysics Data System (ADS)

    Istanbulluoglu, E.; Vivoni, E. R.; Ivanov, V. Y.; Bras, R. L.

    2005-12-01

    Landscape morphology has an important control on the spatial and temporal organization of basin hydrologic response to climate forcing, affecting soil moisture redistribution as well as vegetation function. On the other hand, erosion, driven by hydrology and modulated by vegetation, produces landforms over geologic time scales that reflect characteristic signatures of the dominant land forming process. Responding to extreme climate events or anthropogenic disturbances of the land surface, infrequent but rapid forms of erosion (e.g., arroyo development, landsliding) can modify topography such that basin hydrology is significantly influenced. Despite significant advances in both hydrologic and geomorphic modeling over the past two decades, the dynamic interactions between basin hydrology, geomorphology and terrestrial ecology are not adequately captured in current model frameworks. In order to investigate hydrologic-geomorphic-ecologic interactions at the basin scale we present initial efforts in integrating the CHILD landscape evolution model (Tucker et al. 2001) with the tRIBS hydrology model (Ivanov et al. 2004), both developed in a common software environment. In this talk, we present preliminary results of the numerical modeling of the coupled evolution of basin hydro-geomorphic response and resulting landscape morphology in two sets of examples. First, we discuss the long-term evolution of both the hydrologic response and the resulting basin morphology from an initially uplifted plateau. In the second set of modeling experiments, we implement changes in climate and land-use to an existing topography and compare basin hydrologic response to the model results when landscape form is fixed (e.g. no coupling between hydrology and geomorphology). Model results stress the importance of internal basin dynamics, including runoff generation mechanisms and hydrologic states, in shaping hydrologic response as well as the importance of employing comprehensive

  6. Information Processing Profiles of Internalizing and Externalizing Behavior Problems: Evidence from a Population-Based Sample of Preadolescents

    ERIC Educational Resources Information Center

    Brunnekreef, J. Agnes; De Sonneville, Leo M. J.; Althaus, Monika; Minderaa, Ruud B.; Oldehinkel, Albertine J.; Verhulst, Frank C.; Ormel, Johan

    2007-01-01

    Background: The present study explores the relationships between several information processing capacities and internalizing and externalizing behavior problems in a general population sample of 10- to 12-year olds (N = 2,037 51% girls). Methods: Parent-reported behavior problems as assessed by the Child Behavior Checklist were used to form four…

  7. SITE PROGRAM DEMONSTRATION ECO LOGIC INTERNATIONAL GAS-PHASE CHEMICAL REDUCTION PROCESS, BAY CITY, MICHIGAN TECHNOLOGY EVALUATION REPORT

    EPA Science Inventory

    The SITE Program funded a field demonstration to evaluate the Eco Logic Gas-Phase Chemical Reduction Process developed by ELI Eco Logic International Inc. (ELI), Ontario, Canada. The Demonstration took place at the Middleground Landfill in Bay City, Michigan using landfill wa...

  8. Assessing the Effectiveness of the Internationalization Process in Higher Education Institutions: A Case Study of Florida International University

    ERIC Educational Resources Information Center

    Iuspa, Flavia Eleonora

    2010-01-01

    The purpose of this study was to examine a Higher Education Institution's (HEI) process of internationalization. The theoretical model developed by Van Dijk and Miejer (1997) was used to review Florida International University (FIU)'s policy, support, and implementation dimensions and determine its position on the Internationalization Cube, and…

  9. Internal Quality Assurance Reviews: Challenges and Processes--Walter Sisulu University's Business, Management Sciences and Law Faculty

    ERIC Educational Resources Information Center

    Moodly, A.; Saunderson, I.

    2008-01-01

    The Council for Higher Educations' (CHE) Higher Education Quality Committee (HEQC) requires internal quality evaluations to be performed on the various programmes offered by the Faculty before visitation by the HEQC. This article examines some of the challenges and processes followed by six of the departments of Walter Sisulu University's Faculty…

  10. International Processes of Education Policy Formation: An Analytic Framework and the Case of Plan 2021 in El Salvador

    ERIC Educational Resources Information Center

    Edwards, D. Brent, Jr.

    2013-01-01

    This article uses multiple perspectives to frame international processes of education policy formation and then applies the framework to El Salvador's Plan 2021 between 2003 and 2005. These perspectives are policy attraction, policy negotiation, policy imposition, and policy hybridization. Research reveals that the formation of Plan 2021 was the…

  11. Transforming clinical microbiology with bacterial genome sequencing

    PubMed Central

    2016-01-01

    Whole genome sequencing of bacteria has recently emerged as a cost-effective and convenient approach for addressing many microbiological questions. Here we review the current status of clinical microbiology and how it has already begun to be transformed by the use of next-generation sequencing. We focus on three essential tasks: identifying the species of an isolate, testing its properties such as resistance to antibiotics and virulence, and monitoring the emergence and spread of bacterial pathogens. The application of next-generation sequencing will soon be sufficiently fast, accurate and cheap to be used in routine clinical microbiology practice, where it could replace many complex current techniques with a single, more efficient workflow. PMID:22868263

  12. Transforming clinical microbiology with bacterial genome sequencing.

    PubMed

    Didelot, Xavier; Bowden, Rory; Wilson, Daniel J; Peto, Tim E A; Crook, Derrick W

    2012-09-01

    Whole-genome sequencing of bacteria has recently emerged as a cost-effective and convenient approach for addressing many microbiological questions. Here, we review the current status of clinical microbiology and how it has already begun to be transformed by using next-generation sequencing. We focus on three essential tasks: identifying the species of an isolate, testing its properties, such as resistance to antibiotics and virulence, and monitoring the emergence and spread of bacterial pathogens. We predict that the application of next-generation sequencing will soon be sufficiently fast, accurate and cheap to be used in routine clinical microbiology practice, where it could replace many complex current techniques with a single, more efficient workflow.

  13. Emerging Technologies for the Clinical Microbiology Laboratory

    PubMed Central

    Buchan, Blake W.

    2014-01-01

    SUMMARY In this review we examine the literature related to emerging technologies that will help to reshape the clinical microbiology laboratory. These topics include nucleic acid amplification tests such as isothermal and point-of-care molecular diagnostics, multiplexed panels for syndromic diagnosis, digital PCR, next-generation sequencing, and automation of molecular tests. We also review matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) and electrospray ionization (ESI) mass spectrometry methods and their role in identification of microorganisms. Lastly, we review the shift to liquid-based microbiology and the integration of partial and full laboratory automation that are beginning to impact the clinical microbiology laboratory. PMID:25278575

  14. Effects of Processing Parameters on Internal Stress of BN Films Prepared by Ion Mixing and Vapor Deposition

    SciTech Connect

    Hanaki, Satoshi; Leng, Bo; Uchida, Hitoshi

    2010-10-13

    Boron nitride (BN) films have been attractive due to their excellent properties such as high hardness, thermal conductivity and chemical stability. In this study, BN films were prepared by depositing B vapor under simultaneous irradiation of N ions, that is ion mixing and vapor deposition (IVD) technique. The effects of processing parameters such as, acceleration voltage of N ions, transport ratio B/N and substrate temperature, on the internal stress of BN films were investigated. As a result, compressive internal stress increases at low acceleration voltage and high transport ratio B/N, which corresponded to the condition for formation of cBN phase. The hardness also becomes high at this condition and there is a strong correlation between internal stress and hardness of BN film. In addition to that, relaxation of internal stress by inserting inner layer between substrate and cBN layer has been carried out. It is confirmed that internal stress can be decreased by inner layer. Especially, relaxation of internal stress without degradation of high hardness can be achieved when the crystal structure of inner layer is hBN.

  15. Models and microbiology: Pasteur and the body.

    PubMed

    Hanley, James G

    2003-01-01

    Louis Pasteur developed a model of the body as a culture vessel in the late 1870s as an explanation of both natural and acquired immunity, and other investigators quickly applied the model in the explanation of other microbiological phenomena, principally the tissue tropism seen in the normal and the pathological flora. This paper will argue that although Pasteur quickly abandoned the model, it persisted as an explanation of tissue tropism for nearly 70 years, structuring the interpretation of data by and guiding the research of a diverse group of microbiological researchers.

  16. Microbiologically induced deterioration of concrete--a review.

    PubMed

    Wei, Shiping; Jiang, Zhenglong; Liu, Hao; Zhou, Dongsheng; Sanchez-Silva, Mauricio

    2013-12-01

    Microbiologically induced deterioration (MID) causes corrosion of concrete by producing acids (including organic and inorganic acids) that degrade concrete components and thus compromise the integrity of sewer pipelines and other structures, creating significant problems worldwide. Understanding of the fundamental corrosion process and the causal agents will help us develop an appropriate strategy to minimize the costs in repairs. This review presents how microorganisms induce the deterioration of concrete, including the organisms involved and their colonization and succession on concrete, the microbial deterioration mechanism, the approaches of studying MID and safeguards against concrete biodeterioration. In addition, the uninvestigated research area of MID is also proposed.

  17. Ensuring Food Security Through Enhancing Microbiological Food Safety

    NASA Astrophysics Data System (ADS)

    Mikš-Krajnik, Marta; Yuk, Hyun-Gyun; Kumar, Amit; Yang, Yishan; Zheng, Qianwang; Kim, Min-Jeong; Ghate, Vinayak; Yuan, Wenqian; Pang, Xinyi

    2015-10-01

    Food safety and food security are interrelated concepts with a profound impact on the quality of human life. Food security describes the overall availability of food at different levels from global to individual household. While, food safety focuses on handling, preparation and storage of foods in order to prevent foodborne illnesses. This review focuses on innovative thermal and non-thermal technologies in the area of food processing as the means to ensure food security through improving food safety with emphasis on the reduction and control of microbiological risks. The antimicrobial efficiency and mechanism of new technologies to extend the shelf life of food product were also discussed.

  18. [The opportunities, challenges and trends in the rejuvenation of microbiology].

    PubMed

    Shen, Ping; Chen, Xiangdong

    2010-01-01

    In history, the development of microbiology had undergone two golden ages and some depression time as well. In the last two decades, the application of many physiochemical technologies including genomics, structural biology, bioinformatics, PCR, and high-resolution microscopy has led to a series of breakthroughs in microbiology. Microbiology has now awakened and entered its third golden age for development. This review discusses our view of the opportunities, challenges, and trends in the current advancement of microbiology. The topics include: (1) The two golden ages for microbiology in history. (2) The opportunities and challenges in the rejuvenation of microbiology. (3) The characteristics and trends of the current development of microbiology. (4) Integral microbiology--the hallmark of the third golden age.

  19. Successful Application of Active Learning Techniques to Introductory Microbiology.

    ERIC Educational Resources Information Center

    Hoffman, Elizabeth A.

    2001-01-01

    Points out the low student achievement in microbiology courses and presents an active learning method applied in an introductory microbiology course which features daily quizzes, cooperative learning activities, and group projects. (Contains 30 references.) (YDS)

  20. State of the art in benefit-risk analysis: food microbiology.

    PubMed

    Magnússon, S H; Gunnlaugsdóttir, H; Loveren, H van; Holm, F; Kalogeras, N; Leino, O; Luteijn, J M; Odekerken, G; Pohjola, M V; Tijhuis, M J; Tuomisto, J T; Ueland, Ø; White, B C; Verhagen, H

    2012-01-01

    Over the past years benefit-risk analysis (BRA) in relation to foods and food ingredients has gained much attention; in Europe and worldwide. BRA relating to food microbiology is however a relatively new field of research. Microbiological risk assessment is well defined but assessment of microbial benefits and the weighing of benefits and risk has not been systematically addressed. In this paper the state of the art in benefit-risk analysis in food microbiology is presented, with a brief overview of microbiological food safety practices. The quality and safety of foods is commonly best preserved by delaying the growth of spoilage bacteria and contamination by bacterial pathogens. However, microorganisms in food can be both harmful and beneficial. Many microorganisms are integral to various food production processes e.g. the production of beer, wine and various dairy products. Moreover, the use of some microorganisms in the production of fermented foods are often claimed to have beneficial effects on food nutrition and consumer health. Furthermore, food safety interventions leading to reduced public exposure to foodborne pathogens can be regarded as benefits. The BRA approach integrates an independent assessment of both risks and benefits and weighs the two using a common currency. Recently, a number of initiatives have been launched in the field of food and nutrition to address the formulation of the benefit-risk assessment approach. BRA has recently been advocated by EFSA for the public health management of food and food ingredients; as beneficial and adverse chemicals can often be found within the same foods and even the same ingredients. These recent developments in the scoping of BRA could be very relevant for food microbiological issues. BRA could become a valuable methodology to support evaluations and decision making regarding microbiological food safety and public health, supplementing other presently available policy making and administrative tools for

  1. International Communique. . . About Information, People, Places, Things. Printing Processes Issue P-8B.

    ERIC Educational Resources Information Center

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    Focusing on the production and utilization of printing processes in constructing effective visuals for teaching, this bulletin contains articles on the silk screening stencil process, use of a similar process with a portable mimeograph, and the hectograph process. The first article lists equipment needed to make a silk screen, steps in building…

  2. Advances in the hydrogeochemistry and microbiology of acid mine waters

    USGS Publications Warehouse

    Nordstrom, D. Kirk

    2000-01-01

    The last decade has witnessed a plethora of research related to the hydrogeochemistry and microbiology of acid mine waters and associated tailings and waste-rock waters. Numerous books, reviews, technical papers, and proceedings have been published that examine the complex bio-geochemical process of sulfide mineral oxidation, develop and apply geochemical models to site characterization, and characterize the microbial ecology of these environments. This review summarizes many of these recent works, and provides references for those investigating this field. Comparisons of measured versus calculated Eh and measured versus calculated pH for water samples from several field sites demonstrate the reliability of some current geochemical models for aqueous speciation and mass balances. Geochemical models are not, however, used to predict accurately time-dependent processes but to improve our understanding of these systems and to constrain possible processes that contribute to actual or potential water quality issues. Microbiological studies are demonstrating that there is much we have yet to learn about the types of different microorganisms and their function and ecology in mine-waste environments. A broad diversity of green algae, bacteria, archaea, yeasts, and fungi are encountered in acid mine waters, and a better understanding of their ecology and function may potentially enhance remediation possibilities as well as our understanding of the evolution of life.

  3. Practical microbiology in schools: a survey of UK teachers.

    PubMed

    Redfern, James; Burdass, Dariel; Verran, Joanna

    2013-11-01

    A survey of secondary school teachers investigated practical microbiology in the classroom. The results were heartening (practical microbiology was common), but concerns were expressed regarding equipment, time, cost, and expertise. Microbiologists should engage more with school education to support teachers and maintain the health of microbiology for future generations.

  4. 21 CFR 866.2350 - Microbiological assay culture medium.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Microbiological assay culture medium. 866.2350... Microbiological assay culture medium. (a) Identification. A microbiological assay culture medium is a device that... organism in the innoculated medium. Test results aid in the diagnosis of disease resulting from...

  5. 21 CFR 866.2350 - Microbiological assay culture medium.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Microbiological assay culture medium. 866.2350... Microbiological assay culture medium. (a) Identification. A microbiological assay culture medium is a device that... organism in the innoculated medium. Test results aid in the diagnosis of disease resulting from...

  6. 21 CFR 866.2350 - Microbiological assay culture medium.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Microbiological assay culture medium. 866.2350... Microbiological assay culture medium. (a) Identification. A microbiological assay culture medium is a device that... organism in the innoculated medium. Test results aid in the diagnosis of disease resulting from...

  7. 21 CFR 866.2350 - Microbiological assay culture medium.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Microbiological assay culture medium. 866.2350... Microbiological assay culture medium. (a) Identification. A microbiological assay culture medium is a device that... organism in the innoculated medium. Test results aid in the diagnosis of disease resulting from...

  8. 21 CFR 866.2350 - Microbiological assay culture medium.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Microbiological assay culture medium. 866.2350... Microbiological assay culture medium. (a) Identification. A microbiological assay culture medium is a device that... organism in the innoculated medium. Test results aid in the diagnosis of disease resulting from...

  9. Undergraduate Laboratory Exercises Specific to Food Spoilage Microbiology

    ERIC Educational Resources Information Center

    Snyder, Abigail B.; Worobo, Randy W.; Orta-Ramirez, Alicia

    2016-01-01

    Food spoilage has an enormous economic impact, and microbial food spoilage plays a significant role in food waste and loss; subsequently, an equally significant portion of undergraduate food microbiology instruction should be dedicated to spoilage microbiology. Here, we describe a set of undergraduate microbiology laboratory exercises that focus…

  10. Results of microbiological Investigations of Orbital Station MIR Environment

    NASA Astrophysics Data System (ADS)

    Novikova, N.

    15-year experience of orbital station MIR service demonstrated that specifically modified space vehicle environment allows to consider spaceship habitats as a certain ecological niche of microbial community development and functioning, which was formed from the organisms of different physiological and taxonomical groups. As a result of on-board experiments and revision of interior and equipment more than 234 microorganisms were identified. They were represented by technophylic specia, which cause material damage, as well as potential pathogens (bacteria, actinomyces spp, fungi), which capable to grow on artificial substrates. Resident colonization of interior and equipment of space habitat by bacterial and fungal associations, taking place during long-term microbiota exposure on cosmophysic, physic-chemical and biological factors, which is accompanied by appearance of technological and medical risks, capable to provide significant influence on safety of humans and reliability of space equipment. These risks are due to such processes: biodestruction of synthetic and organic polymeres, biocorrosion of metals, biofoulding of surfaces (biofilms), formation of obturation in vital activity support system, occurrence of biodisturbances resulting in devise and equipment failure, occurrence and development of supertolerants and other variants with unpredictable attributes, which are expressed as a result of phenotypical and genotypical modifications. Based on the information from results of in-flight and laboratory microbiological investigations, the following suppositions can be made to characterize evolution of the microbial community aboard long-operating space vehicle: - environment of a long-operating piloted space vehicle may be a peculiar kind of ecological niche for development and reproduction of bacilli and fungi belonging to particular species, - bacteriofungal associations primarily reside on decorative-finish and structural materials of space interior and

  11. Planned Environmental Microbiology Aspects of Future Lunar and Mars Missions

    NASA Technical Reports Server (NTRS)

    Ott, C. Mark; Castro, Victoria A.; Pierson, Duane L.

    2006-01-01

    With the establishment of the Constellation Program, NASA has initiated efforts designed similar to the Apollo Program to return to the moon and subsequently travel to Mars. Early lunar sorties will take 4 crewmembers to the moon for 4 to 7 days. Later missions will increase in duration up to 6 months as a lunar habitat is constructed. These missions and vehicle designs are the forerunners of further missions destined for human exploration of Mars. Throughout the planning and design process, lessons learned from the International Space Station (ISS) and past programs will be implemented toward future exploration goals. The standards and requirements for these missions will vary depending on life support systems, mission duration, crew activities, and payloads. From a microbiological perspective, preventative measures will remain the primary techniques to mitigate microbial risk. Thus, most of the effort will focus on stringent preflight monitoring requirements and engineering controls designed into the vehicle, such as HEPA air filters. Due to volume constraints in the CEV, in-flight monitoring will be limited for short-duration missions to the measurement of biocide concentration for water potability. Once long-duration habitation begins on the lunar surface, a more extensive environmental monitoring plan will be initiated. However, limited in-flight volume constraints and the inability to return samples to Earth will increase the need for crew capabilities in determining the nature of contamination problems and method of remediation. In addition, limited shelf life of current monitoring hardware consumables and limited capabilities to dispose of biohazardous trash will drive flight hardware toward non-culture based methodologies, such as hardware that rapidly distinguishes biotic versus abiotic surface contamination. As missions progress to Mars, environmental systems will depend heavily on regeneration of air and water and biological waste remediation and

  12. Microbiological quality of pediatric oral liquid formulations.

    PubMed

    Cabañas Poy, Maria Josep; Cañete Ramírez, Carme; González di Lauro, Sabina X; Rodríguez Garrido, Virginia; Roig Carbajosa, Gloria; Fernández-Polo, Aurora; Clemente Bautista, Susana

    2016-09-01

    The oral administration of drugs to the pediatric population involves the extemporaneous preparation of liquid formulations. These formulations have studies on their physicochemical stability, but they often lack microbiological studies. The objective of this study is to check the microbiological quality of five oral liquid formulations prepared with different excipients, which represent five major combinations, in two conditions: kept unopened until the day of the test, and in a multi-dose vial opened daily. The formulations were prepared according to standard operating procedures. Half of each batch was packaged in vials that remained closed until the day of testing, and the other half in a single container which was opened daily. Both the vials and the containers had been previously sterilized. Microbiological tests were performed weekly during the first month of the study, and then every two weeks, until the expiration date. The microbiological quality of oral liquid formulations is determined by the Royal Spanish Pharmacopoeia. The conclusion was that none of the formulations prepared that were packaged in sterilized containers became contaminated, either in unopened vials or in multi-dose containers when they were opened daily.

  13. Reasons for Suboptimal Learning in Medical Microbiology

    ERIC Educational Resources Information Center

    Struwig, Magdalena C.; Beylefeld, Adriana A.; Joubert, Georgina

    2016-01-01

    Medical microbiology presents a challenge to undergraduate students, mostly due to its extensive content and complexity of unfamiliar terminology. In addition to a narrative review of the literature, we report findings on students' motivation for and approach to learning in the Infections module of an undergraduate medical curriculum, and their…

  14. 7 CFR 58.528 - Microbiological requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., GENERAL SPECIFICATIONS FOR APPROVED PLANTS AND STANDARDS FOR GRADES OF DAIRY PRODUCTS 1 General Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Requirements for Cottage Cheese Bearing Usda Official Identification § 58.528 Microbiological requirements. Compliance shall...

  15. Predictive microbiology in food packaging applications

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Predictive microbiology including growth, inactivation, surface transfer (or cross-contamination), and survival, plays important roles in understanding microbial food safety. Growth models may involve the growth potential of a specified pathogen under different stresses, e.g., temperature, pH, wate...

  16. Developing virtual patients for medical microbiology education.

    PubMed

    McCarthy, David; O'Gorman, Ciaran; Gormley, Gerry J

    2013-12-01

    The landscape of medical education is changing as students embrace the accessibility and interactivity of e-learning. Virtual patients are e-learning resources that may be used to advance microbiology education. Although the development of virtual patients has been widely considered, here we aim to provide a coherent approach for clinical educators.

  17. Applications for predictive microbiology to food packaging

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Predictive microbiology has been used for several years in the food industry to predict microbial growth, inactivation and survival. Predictive models provide a useful tool in risk assessment, HACCP set-up and GMP for the food industry to enhance microbial food safety. This report introduces the c...

  18. Linguistic Diversity in the International Workplace: Language Ideologies and Processes of Exclusion

    ERIC Educational Resources Information Center

    Lønsmann, Dorte

    2014-01-01

    This article draws on a study of language choice and language ideologies in an international company in Denmark. It focuses on the linguistic and social challenges that are related to the diversity of language competences among employees in the modern workplace. Research on multilingualism at work has shown that employees may be excluded from…

  19. Integration of International and Transcultural Content in Nursing Curricula: A Process for Change.

    ERIC Educational Resources Information Center

    Lindquist, Gay J.

    1990-01-01

    Discusses the need to help nursing students develop a global perspective as they prepare to practice nursing. Describes the international and transcultural content in the undergraduate program at the School of Nursing at the University of Wisconsin-Eau Claire. (JOW)

  20. 45 CFR 147.136 - Internal claims and appeals and external review processes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... insurance coverage must comply with all the requirements applicable to group health plans under 29 CFR 2560... group health plan, the group health insurance issuer is subject to the requirements in 29 CFR 2560.503-1... requirements of the ERISA internal claims and appeals procedures applicable to group health plans under 29...

  1. 45 CFR 147.136 - Internal claims and appeals and external review processes.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... insurance coverage must comply with all the requirements applicable to group health plans under 29 CFR 2560... group health plan, the group health insurance issuer is subject to the requirements in 29 CFR 2560.503-1... requirements of the ERISA internal claims and appeals procedures applicable to group health plans under 29...

  2. Perspectives on an Induction Process for International Exchange Teachers: A Leadership Perspective

    ERIC Educational Resources Information Center

    Siler, James Thomas

    2012-01-01

    This study traces the first year experiences of six international exchange teachers employed in three public and charter schools settings from three districts in two southeastern states. Interviews with these teachers from China, Germany and Colombia, and with their school and district leaders enabled me to produce a narrative of how international…

  3. 26 CFR 54.9815-2719T - Internal claims and appeals and external review processes (temporary).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... determination means an adverse benefit determination as defined in 29 CFR 2560.503-1, as well as any rescission... benefit determinations involving urgent care. The requirements of 29 CFR 2560.503-1(f)(2)(i) (which... which the notice of final internal adverse benefit determination is required to be provided under 29...

  4. Global Conceptualization of the Professional Learning Community Process: Transitioning from Country Perspectives to International Commonalities

    ERIC Educational Resources Information Center

    Huffman, Jane B.; Olivier, Dianne F.; Wang, Ting; Chen, Peiying; Hairon, Salleh; Pang, Nicholas

    2016-01-01

    The authors seek to find common PLC structures and actions among global educational systems to enhance understanding and practice. Six international researchers formed the Global Professional Learning Community Network (GloPLCNet), conducted literature reviews of each country's involvement with PLC actions, and noted similarities and common…

  5. Effect of the Crystallization Process on the Marginal and Internal Gaps of Lithium Disilicate CAD/CAM Crowns

    PubMed Central

    Kim, Jae-Hong; Oh, Seunghan; Uhm, Soo-Hyuk

    2016-01-01

    The aim of this study is to quantify the effect of the crystallization process on lithium disilicate ceramic crowns fabricated using a computer-aided design/computer-aided manufacturing (CAD/CAM) system and to determine whether the effect of crystallization is clinically acceptable by comparing values of fit before and after the crystallization process. The mandibular right first molar was selected as the abutment for the experiments. Fifteen working models were prepared. Lithium disilicate crowns appropriate for each abutment were prepared using a commercial CAD/CAM system. Gaps in the marginal area and 4 internal areas of each crown were measured twice—before and after crystallization—using the silicone replica technique. The mean values of fit before and after crystallization were analyzed using a paired t-test to examine whether the conversion that occurred during crystallization affected marginal and internal gaps (α = 0.05). Gaps increased in the marginal area and decreased in the internal areas after crystallization. There were statistically significant differences in all of the investigated areas (P < 0.05). None of the values for marginal and internal fit of lithium disilicate CAD/CAM crowns after crystallization exceeded 120 μm, which is the clinically acceptable threshold. PMID:27123453

  6. Effect of the Crystallization Process on the Marginal and Internal Gaps of Lithium Disilicate CAD/CAM Crowns.

    PubMed

    Kim, Jae-Hong; Oh, Seunghan; Uhm, Soo-Hyuk

    2016-01-01

    The aim of this study is to quantify the effect of the crystallization process on lithium disilicate ceramic crowns fabricated using a computer-aided design/computer-aided manufacturing (CAD/CAM) system and to determine whether the effect of crystallization is clinically acceptable by comparing values of fit before and after the crystallization process. The mandibular right first molar was selected as the abutment for the experiments. Fifteen working models were prepared. Lithium disilicate crowns appropriate for each abutment were prepared using a commercial CAD/CAM system. Gaps in the marginal area and 4 internal areas of each crown were measured twice-before and after crystallization-using the silicone replica technique. The mean values of fit before and after crystallization were analyzed using a paired t-test to examine whether the conversion that occurred during crystallization affected marginal and internal gaps (α = 0.05). Gaps increased in the marginal area and decreased in the internal areas after crystallization. There were statistically significant differences in all of the investigated areas (P < 0.05). None of the values for marginal and internal fit of lithium disilicate CAD/CAM crowns after crystallization exceeded 120 μm, which is the clinically acceptable threshold. PMID:27123453

  7. “I Look in Your Eyes, Honey”: Internal Face Features Induce Spatial Frequency Preference for Human Face Processing

    PubMed Central

    Keil, Matthias S.

    2009-01-01

    Numerous psychophysical experiments found that humans preferably rely on a narrow band of spatial frequencies for recognition of face identity. A recently conducted theoretical study by the author suggests that this frequency preference reflects an adaptation of the brain's face processing machinery to this specific stimulus class (i.e., faces). The purpose of the present study is to examine this property in greater detail and to specifically elucidate the implication of internal face features (i.e., eyes, mouth, and nose). To this end, I parameterized Gabor filters to match the spatial receptive field of contrast sensitive neurons in the primary visual cortex (simple and complex cells). Filter responses to a large number of face images were computed, aligned for internal face features, and response-equalized (“whitened”). The results demonstrate that the frequency preference is caused by internal face features. Thus, the psychophysically observed human frequency bias for face processing seems to be specifically caused by the intrinsic spatial frequency content of internal face features. PMID:19325870

  8. Microbiology of ultrahigh temperature milk

    SciTech Connect

    Westhoff, D.C.

    1981-01-01

    Ultrahigh temperature thermal processing can sterilize milk. Potential energy savings of a commercially sterile, aseptically packaged, nonrefrigerated milk provide the incentive for eventual introduction of the product in the United States. Attention should be directed to raw milk quality, processing parameters, quality control tests, and thermal inactivation data for spores in the ultrahigh temperature range.

  9. Microbiology of ultrahigh temperature milk

    SciTech Connect

    Westhoff, D.C.

    1981-01-01

    Ultrahigh temperature thermal processing can sterilize milk. Potential energy savings of a commercially sterile, aseptically packaged, nonrefrigerated milk provided the incentive for eventual introduction of the product in the United States. Attention should be directed to raw milk quality, processing parameters, quality control tests, and thermal inactivation data for spores in the ultrahigh temperature range.

  10. Sampling and Data Analysis for Environmental Microbiology

    SciTech Connect

    Murray, Christopher J.

    2001-06-01

    A brief review of the literature indicates the importance of statistical analysis in applied and environmental microbiology. Sampling designs are particularly important for successful studies, and it is highly recommended that researchers review their sampling design before heading to the laboratory or the field. Most statisticians have numerous stories of scientists who approached them after their study was complete only to have to tell them that the data they gathered could not be used to test the hypothesis they wanted to address. Once the data are gathered, a large and complex body of statistical techniques are available for analysis of the data. Those methods include both numerical and graphical techniques for exploratory characterization of the data. Hypothesis testing and analysis of variance (ANOVA) are techniques that can be used to compare the mean and variance of two or more groups of samples. Regression can be used to examine the relationships between sets of variables and is often used to examine the dependence of microbiological populations on microbiological parameters. Multivariate statistics provides several methods that can be used for interpretation of datasets with a large number of variables and to partition samples into similar groups, a task that is very common in taxonomy, but also has applications in other fields of microbiology. Geostatistics and other techniques have been used to examine the spatial distribution of microorganisms. The objectives of this chapter are to provide a brief survey of some of the statistical techniques that can be used for sample design and data analysis of microbiological data in environmental studies, and to provide some examples of their use from the literature.

  11. Simple method for quantifying microbiologically assisted chloramine decay in drinking water.

    PubMed

    Sathasivan, Arumugam; Fisher, Ian; Kastl, George

    2005-07-15

    In a chloraminated drinking water distribution system, monochloramine decays due to chemical and microbiological reactions. For modeling and operational control purposes, it is necessary to know the relative contribution of each type of reaction, but there was no method to quantify these contributions separately. A simple method was developed to do so. It compares monochloramine decay rates of processed (0.2 microm filtered or microbiologically inhibited by adding 100 microg of silver/L as silver nitrate) and unprocessed samples under controlled temperature conditions. The term microbial decay factor (Fm) was defined and derived from this method, to characterize the relative contribution of microbiologically assisted monochloramine decay to the total monochloramine decay observed in bulk water. Fm is the ratio between microbiologically assisted monochloramine decay and chemical decay of a given water sample measured at 20 degrees C. One possible use of the method is illustrated, where a service reservoir's bulk and inlet waters were sampled twice and analyzed for both the traditional indicators and the microbial decay factor. The microbial decay factor values alone indicated that more microbiologically assisted monochloramine decay was occurring in one bulk water than the other. In contrast, traditional nitrification indicators failed to show any difference. Further analysis showed that the microbial decay factor is more sensitive and that it alone can provide an early warning.

  12. Microbiological monitoring for the US Geological Survey National Water-Quality Assessment Program

    USGS Publications Warehouse

    Francy, Donna S.; Myers, Donna N.; Helsel, Dennis R.

    2000-01-01

    Data to characterize the microbiological quality of the Nation?s fresh, marine, and estuarine waters are usually collected for local purposes, most often to judge compliance with standards for protection of public health in swimmable or drinkable waters. Methods and procedures vary with the objectives and practices of the parties collecting data and are continuously being developed or modified. Therefore, it is difficult to provide a nationally consistent picture of the microbial quality of the Nation?s waters. Study objectives and guidelines for a national microbiological monitoring program are outlined in this report, using the framework of the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) program. A national program is designed to provide long-term data on the presence of microbiological pathogens and indicators in ground water and surface water to support effective water policy and management. Three major groups of waterborne pathogens affect the public health acceptability of waters in the United States?bacteria, protozoa, and viruses. Microbiological monitoring in NAWQA would be designed to assess the occurrence, distribution, and trends of pathogenic organisms and indicators in surface waters and ground waters; relate the patterns discerned to factors that help explain them; and improve our understanding of the processes that control microbiological water quality.

  13. [Analysis of the results of the 2010 External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology].

    PubMed

    Ruiz de Gopegui Bordes, Enrique; Serrano, M del Remedio Guna; Orta Mira, Nieves; Ovies, María Rosario; Poveda, Marta; Cardona, Concepción Gimeno

    2011-12-01

    The External Quality Control Program of the Spanish Society of Infectious Diseases and Clinical Microbiology includes controls for bacteriology, serology, mycology, parasitology, mycobacteria, virology and molecular microbiology. This article presents the most important conclusions and lessons of the 2010 controls. As a whole, the results obtained in 2010 confirm the excellent skill and good technical standards found in previous years. However, erroneous results can be obtained in any laboratory and in clinically relevant determinations. The results of this program highlight the need to implement both internal and external controls to ensure maximal quality of microbiological tests(1).

  14. Major influences on buying decision processes by international university students. Differences by continent of origin.

    PubMed

    Tirelli, Christian; Pilar Martínez-Ruiz, María; Gómez-Ladrón-De-Guevara, Ricardo

    2013-12-01

    To analyze how food values and other variables related to dietary acculturation affect international university students' food buying decisions, this article provides an in-depth review of relevant literature related to the food buying decisions of groups of sojourners, which suggest several research hypotheses. The data collection targeted international university students in Spain and used factorial analysis of the main components together with linear parametric regressions. The resulting findings offer distinct insights, according to sojourners' continent of origin. Specifically, whereas European students exhibit a higher propensity to value sustainable production practices in the food choices, American students emphasize flavor and exhibit a greater degree of adaptation. These findings in turn suggest some key managerial recommendations and research guidelines for both private and public operators in related fields.

  15. EFFECT OF DEXTRAN-graft-POLYACRYLAMIDE INTERNAL STRUCTURE ON FLOCCULATION PROCESS PARAMETERS

    SciTech Connect

    Bezugla, T.; Kutsevol, N.; Shyichuk, A.; Ziolkowska, D.

    2008-08-28

    Dextran-graft-Polyacrylamide copolymers (D-g-PAA) of brush-like architecture were tested as flocculation aids in the model kaolin suspensions. Due to expanded conformation the D-g-PAA copolymers are more effective flocculants than individual PAA with close molecular mass. The internal structure of D-g-PAA copolymers which is determined by number and length of grafted PAA chains, the distance between grafts, etc., has the significant influence on flocculation behavior of such polymers.

  16. IPMP 2013--a comprehensive data analysis tool for predictive microbiology.

    PubMed

    Huang, Lihan

    2014-02-01

    Predictive microbiology is an area of applied research in food science that uses mathematical models to predict the changes in the population of pathogenic or spoilage microorganisms in foods exposed to complex environmental changes during processing, transportation, distribution, and storage. It finds applications in shelf-life prediction and risk assessments of foods. The objective of this research was to describe the performance of a new user-friendly comprehensive data analysis tool, the Integrated Pathogen Modeling Model (IPMP 2013), recently developed by the USDA Agricultural Research Service. This tool allows users, without detailed programming knowledge, to analyze experimental kinetic data and fit the data to known mathematical models commonly used in predictive microbiology. Data curves previously published in literature were used to test the models in IPMP 2013. The accuracies of the data analysis and models derived from IPMP 2013 were compared in parallel to commercial or open-source statistical packages, such as SAS® or R. Several models were analyzed and compared, including a three-parameter logistic model for growth curves without lag phases, reduced Huang and Baranyi models for growth curves without stationary phases, growth models for complete growth curves (Huang, Baranyi, and re-parameterized Gompertz models), survival models (linear, re-parameterized Gompertz, and Weibull models), and secondary models (Ratkowsky square-root, Huang square-root, Cardinal, and Arrhenius-type models). The comparative analysis suggests that the results from IPMP 2013 were equivalent to those obtained from SAS® or R. This work suggested that the IPMP 2013 could be used as a free alternative to SAS®, R, or other more sophisticated statistical packages for model development in predictive microbiology.

  17. Microbiological aspects of peritonitis associated with continuous ambulatory peritoneal dialysis.

    PubMed Central

    von Graevenitz, A; Amsterdam, D

    1992-01-01

    The process of continuous ambulatory peritoneal dialysis has provided a useful, relatively inexpensive, and safe alternative for patients with end-stage renal disease. Infectious peritonitis, however, has limited a more widespread acceptance of this technique. The definition of peritonitis in this patient population is not universally accepted and does not always include the laboratory support of a positive culture (or Gram stain). In part, the omission of clinical microbiological findings stems from the lack of sensitivity of earlier microbiological efforts. Peritonitis results from decreased host phagocytic efficiency with depressed phagocytosis and bactericidal capacity of peritoneal macrophages. During episodes of peritonitis, fluid movement is reversed, away from the lymphatics and peritoneal membrane and toward the cavity. As a result, bloodstream infections are rare. Most peritonitis episodes are caused by bacteria. Coagulase-negative staphylococci are the most frequently isolated organisms, usually originating from the skin flora, but a wide array of microbial species have been documented as agents of peritonitis. Clinical microbiology laboratories need to be cognizant of the diverse agents so that appropriate primary media can be used. The quantity of dialysate fluid that is prepared for culture is critical and should constitute at least 10 ml. The sensitivity of the cultural approach depends on the volume of dialysate, its pretreatment (lysis or centrifugation), the media used, and the mode of incubation. The low concentration of microorganisms in dialysate fluids accounts for negative Gram stain results. Prevention of infection in continuous ambulatory peritoneal dialysis patients is associated with the socioeconomic status of the patient, advances in equipment (catheter) technology, and, probably least important, the application of prophylactic antimicrobial agents. PMID:1735094

  18. Microbiology: lessons from a first attempt at Lake Ellsworth.

    PubMed

    Pearce, D A; Magiopoulos, I; Mowlem, M; Tranter, M; Holt, G; Woodward, J; Siegert, M J

    2016-01-28

    During the attempt to directly access, measure and sample Subglacial Lake Ellsworth in 2012-2013, we conducted microbiological analyses of the drilling equipment, scientific instrumentation, field camp and natural surroundings. From these studies, a number of lessons can be learned about the cleanliness of deep Antarctic subglacial lake access leading to, in particular, knowledge of the limitations of some of the most basic relevant microbiological principles. Here, we focus on five of the core challenges faced and describe how cleanliness and sterilization were implemented in the field. In the light of our field experiences, we consider how effective these actions were, and what can be learnt for future subglacial exploration missions. The five areas covered are: (i) field camp environment and activities, (ii) the engineering processes surrounding the hot water drilling, (iii) sample handling, including recovery, stability and preservation, (iv) clean access methodologies and removal of sample material, and (v) the biodiversity and distribution of bacteria around the Antarctic. Comparisons are made between the microbiology of the Lake Ellsworth field site and other Antarctic systems, including the lakes on Signy Island, and on the Antarctic Peninsula at Lake Hodgson. Ongoing research to better define and characterize the behaviour of natural and introduced microbial populations in response to deep-ice drilling is also discussed. We recommend that future access programmes: (i) assess each specific local environment in enhanced detail due to the potential for local contamination, (ii) consider the sterility of the access in more detail, specifically focusing on single cell colonization and the introduction of new species through contamination of pre-existing microbial communities, (iii) consider experimental bias in methodological approaches, (iv) undertake in situ biodiversity detection to mitigate risk of non-sample return and post-sample contamination, and (v

  19. Diagnostic trends in Clostridium difficile detection in Finnish microbiology laboratories.

    PubMed

    Könönen, Eija; Rasinperä, Marja; Virolainen, Anni; Mentula, Silja; Lyytikäinen, Outi

    2009-12-01

    Due to increased interest directed to Clostridium difficile-associated infections, a questionnaire survey of laboratory diagnostics of toxin-producing C. difficile was conducted in Finland in June 2006. Different aspects pertaining to C. difficile diagnosis, such as requests and criteria used for testing, methods used for its detection, yearly changes in diagnostics since 1996, and the total number of investigations positive for C. difficile in 2005, were asked in the questionnaire, which was sent to 32 clinical microbiology laboratories, including all hospital-affiliated and the relevant private clinical microbiology laboratories in Finland. The situation was updated by phone and email correspondence in September 2008. In June 2006, 28 (88%) laboratories responded to the questionnaire survey; 24 of them reported routinely testing requested stool specimens for C. difficile. Main laboratory methods included toxin detection (21/24; 88%) and/or anaerobic culture (19/24; 79%). In June 2006, 18 (86%) of the 21 laboratories detecting toxins directly from feces, from the isolate, or both used methods for both toxin A (TcdA) and B (TcdB), whereas only one laboratory did so in 1996. By September 2008, all of the 23 laboratories performing diagnostics for C. difficile used methods for both TcdA and TcdB. In 2006, the number of specimens processed per 100,000 population varied remarkably between different hospital districts. In conclusion, culturing C. difficile is common and there has been a favorable shift in toxin detection practice in Finnish clinical microbiology laboratories. However, the variability in diagnostic activity reported in 2006 creates a challenge for national monitoring of the epidemiology of C. difficile and related diseases.

  20. Microbiology: lessons from a first attempt at Lake Ellsworth.

    PubMed

    Pearce, D A; Magiopoulos, I; Mowlem, M; Tranter, M; Holt, G; Woodward, J; Siegert, M J

    2016-01-28

    During the attempt to directly access, measure and sample Subglacial Lake Ellsworth in 2012-2013, we conducted microbiological analyses of the drilling equipment, scientific instrumentation, field camp and natural surroundings. From these studies, a number of lessons can be learned about the cleanliness of deep Antarctic subglacial lake access leading to, in particular, knowledge of the limitations of some of the most basic relevant microbiological principles. Here, we focus on five of the core challenges faced and describe how cleanliness and sterilization were implemented in the field. In the light of our field experiences, we consider how effective these actions were, and what can be learnt for future subglacial exploration missions. The five areas covered are: (i) field camp environment and activities, (ii) the engineering processes surrounding the hot water drilling, (iii) sample handling, including recovery, stability and preservation, (iv) clean access methodologies and removal of sample material, and (v) the biodiversity and distribution of bacteria around the Antarctic. Comparisons are made between the microbiology of the Lake Ellsworth field site and other Antarctic systems, including the lakes on Signy Island, and on the Antarctic Peninsula at Lake Hodgson. Ongoing research to better define and characterize the behaviour of natural and introduced microbial populations in response to deep-ice drilling is also discussed. We recommend that future access programmes: (i) assess each specific local environment in enhanced detail due to the potential for local contamination, (ii) consider the sterility of the access in more detail, specifically focusing on single cell colonization and the introduction of new species through contamination of pre-existing microbial communities, (iii) consider experimental bias in methodological approaches, (iv) undertake in situ biodiversity detection to mitigate risk of non-sample return and post-sample contamination, and (v

  1. Transforming followers' value internalization and role self-efficacy: Dual processes promoting performance and peer norm-enforcement.

    PubMed

    Hannah, Sean T; Schaubroeck, John M; Peng, Ann C

    2016-02-01

    We develop a model in which transformational leadership bolsters followers' internalization of core organizational values, which in turn influences their performance and willingness to report peers' transgressions. The model also specifies a distinct process wherein transformational leadership enhances follower performance by promoting followers' role self-efficacy. We tested the model on 2 large units (i.e., companies) of soldiers undergoing training and socialization. The study bracketed changes in soldiers' internalization of the organizational values and role self-efficacy over a 14-week period. The results support the widely held but empirically unestablished views that transformational leadership promotes change in value internalization and that this partially explains its influence on follower performance. Findings also indicate a distinct intervening process through which transformational leadership promotes performance by enhancing followers' beliefs in their own capabilities (i.e., self-efficacy). This research thus shows that 2 key processes both contribute to the understanding of how transformational leadership transforms followers and influences their behavior. PMID:26167644

  2. Soil Lysimeter Excavation for Coupled Hydrological, Geochemical, and Microbiological Investigations.

    PubMed

    Sengupta, Aditi; Wang, Yadi; Meira Neto, Antonio A; Matos, Katarena A; Dontsova, Katerina; Root, Rob; Neilson, Julie W; Maier, Raina M; Chorover, Jon; Troch, Peter A

    2016-01-01

    Studying co-evolution of hydrological and biogeochemical processes in the subsurface of natural landscapes can enhance the understanding of coupled Earth-system processes. Such knowledge is imperative in improving predictions of hydro-biogeochemical cycles, especially under climate change scenarios. We present an experimental method, designed to capture sub-surface heterogeneity of an initially homogeneous soil system. This method is based on destructive sampling of a soil lysimeter designed to simulate a small-scale hillslope. A weighing lysimeter of one cubic meter capacity was divided into sections (voxels) and was excavated layer-by-layer, with sub samples being collected from each voxel. The excavation procedure was aimed at detecting the incipient heterogeneity of the system by focusing on the spatial assessment of hydrological, geochemical, and microbiological properties of the soil. Representative results of a few physicochemical variables tested show the development of heterogeneity. Additional work to test interactions between hydrological, geochemical, and microbiological signatures is planned to interpret the observed patterns. Our study also demonstrates the possibility of carrying out similar excavations in order to observe and quantify different aspects of soil-development under varying environmental conditions and scale. PMID:27684738

  3. Internal grinding of high-speed steels: Shorter processing times with boron nitride grinding tools

    NASA Astrophysics Data System (ADS)

    Borse, D.

    Boron nitride grinding tools can be used to advantage for the grinding of high speed steel (HSS) with a high vanadium content. the abrasives available to date are of limited value because the HSS materials contain very hard carbides, grinding of which, and of vanadium carbide in particular, results in very rapid wear in silicon carbide or corundum grinding wheels. The hardness of these steels is usually 62 RC to 70 RC. Boron nitride grinding tools are advantageous for internal grinding of workpieces made of high speed steel for example, sockets, milling tool bores, cutting wheels and crushing rollers. To date, boron nitride grinding wheels or pencil grinders were bonded with synthetic resin. Consequently internal grinding is usually carried out as wet grinding. In the meantime grinding tools bonded with electrodeposited metal bonds (GSS) were developed and proved to be successful for internal grinding. The abrasive grains which are arranged in a single layer protrude freely from the electrobond. During grinding very little heat is generated, so that dry grinding is possible.

  4. Microbiological quality of packaged ice from various sources in Georgia.

    PubMed

    Mako, Stephanie L; Harrison, Mark A; Sharma, Vijendra; Kong, Fanbin

    2014-09-01

    This study determined the microbiological and chemical quality of ice produced and bagged on premises in retail establishments and in free-standing self-service ice vending machines in the state of Georgia and compared the results with that from ice produced by manufacturing companies monitored by the International Packaged Ice Association. Two hundred fifty bags of packaged ice samples were obtained from retail locations and self-service ice vending machines, along with 25 bags of packaged manufactured ice. Ice samples were melted within 24 h of collection and heterotrophic plate count SimPlates were used to detect heterotrophic bacteria present. Colisure and Enterolert assays were used to enumerate coliforms, nonpathogenic Escherichia coli, and enterococci. Membrane filtration coupled with enrichment was used to detect Salmonella and Listeria monocytogenes. Confirmation tests were done for presumptive-positive pathogens. None of the manufactured ice had unacceptable microbial levels. Six percent of the ice samples bagged at retail sites and from ice vending machines contained unsatisfactory levels of heterotrophs compared with the limits set by the International Packaged Ice Association (≥ 500 most probable number [MPN]/100 ml). Thirty-seven percent of these samples contained an unsatisfactory level of coliforms (≥ 1.0 MPN/100 ml), 1% contained nonpathogenic E. coli, and 13% contained enterococci (≥ 1.0 MPN/100 ml). One sample tested positive for the presence of Salmonella and another tested positive for Enterobacter agglomerans. Ninety-five samples of packaged ice from retail establishments and vending machines (38%) had pH levels outside the acceptable range that can affect product flavor. Turbidity of three samples exceeded the acceptable level. No samples had unacceptable nitrate levels. Manufactured ice had better microbiological and chemical quality than ice packaged on the premises of retail locations and from self-serve ice vending machines. PMID

  5. Microbiological quality of packaged ice from various sources in Georgia.

    PubMed

    Mako, Stephanie L; Harrison, Mark A; Sharma, Vijendra; Kong, Fanbin

    2014-09-01

    This study determined the microbiological and chemical quality of ice produced and bagged on premises in retail establishments and in free-standing self-service ice vending machines in the state of Georgia and compared the results with that from ice produced by manufacturing companies monitored by the International Packaged Ice Association. Two hundred fifty bags of packaged ice samples were obtained from retail locations and self-service ice vending machines, along with 25 bags of packaged manufactured ice. Ice samples were melted within 24 h of collection and heterotrophic plate count SimPlates were used to detect heterotrophic bacteria present. Colisure and Enterolert assays were used to enumerate coliforms, nonpathogenic Escherichia coli, and enterococci. Membrane filtration coupled with enrichment was used to detect Salmonella and Listeria monocytogenes. Confirmation tests were done for presumptive-positive pathogens. None of the manufactured ice had unacceptable microbial levels. Six percent of the ice samples bagged at retail sites and from ice vending machines contained unsatisfactory levels of heterotrophs compared with the limits set by the International Packaged Ice Association (≥ 500 most probable number [MPN]/100 ml). Thirty-seven percent of these samples contained an unsatisfactory level of coliforms (≥ 1.0 MPN/100 ml), 1% contained nonpathogenic E. coli, and 13% contained enterococci (≥ 1.0 MPN/100 ml). One sample tested positive for the presence of Salmonella and another tested positive for Enterobacter agglomerans. Ninety-five samples of packaged ice from retail establishments and vending machines (38%) had pH levels outside the acceptable range that can affect product flavor. Turbidity of three samples exceeded the acceptable level. No samples had unacceptable nitrate levels. Manufactured ice had better microbiological and chemical quality than ice packaged on the premises of retail locations and from self-serve ice vending machines.

  6. Microbiological quality and safety assessment of the Rwandan milk and dairy chain.

    PubMed

    Kamana, Olivier; Ceuppens, Siele; Jacxsens, Liesbeth; Kimonyo, Anastase; Uyttendaele, Mieke

    2014-02-01

    Milk is a valuable and nutritious food product that can partially fulfill the rising food demand of the growing African population. The microbiological status of milk and derived products was assessed throughout the milk and dairy chain in Rwanda by enumeration of the total mesophilic count, coliforms, and Staphylococcus aureus and detection of Salmonella and Listeria monocytogenes. The quality of raw milk was satisfactory for the majority of samples, but 5.2% contained Salmonella. At the processing level, the total mesophilic count and coliform numbers indicated ineffective heat treatment during pasteurization or postpasteurization contamination. Increasing bacterial counts were observed along the retail chain and could be attributed to insufficient temperature control during storage. Milk and dairy products sold in milk shops were of poor and variable microbiological quality in comparison with the pasteurized milk sold in supermarkets. In particular, the microbiological load and pathogen prevalence in cheese were unacceptably high.

  7. Determination of Ideal Broth Formulations Needed to Prepare Hydrous Hafnium Oxide Microspheres via the Internal Gelation Process

    SciTech Connect

    Collins, Jack Lee; Hunt, Rodney Dale; Simmerman, S. G.

    2009-02-01

    A simple test-tube methodology was used to determine optimum process parameters for preparing hydrous hafnium oxide microspheres by the internal gelation process. Broth formulations of hafnyl chloride [HfOCl{sub 2}], hexamethylenetetramine, and urea were found that can be used to prepare hydrous hafnium oxide gel spheres in the temperature range of 70-90 C. A few gel-forming runs were made in which microspheres were prepared with some of these formulations in order to equate the test-tube gelation times with actual gelation times. These preparations confirmed that the test-tube methodology is reliable for determining the ideal broths.

  8. Determination of Ideal Broth Formulations Needed to Prepare Hydrous Aluminum Oxide Microspheres via the Internal Gelation Process

    SciTech Connect

    Collins, Jack Lee; Pye, S. L.

    2009-02-01

    A simple test-tube methodology was used to determine optimum process parameters for preparing hydrous aluminum oxide microspheres by the internal gelation process. Broth formulations of aluminum, hexamethylenetetramine, and urea were found that can be used to prepare hydrous aluminum oxide gel spheres in the temperature range of 60-90 C. A few gel-forming runs were made in which microspheres were prepared with some of these formulations in order to equate the test-tube gelation times with actual gelation times. These preparations confirmed that the test-tube methodology is reliable for determining the ideal broths.

  9. Endothelial Cells Use a Formin-Dependent Phagocytosis-Like Process to Internalize the Bacterium Listeria monocytogenes.

    PubMed

    Rengarajan, Michelle; Hayer, Arnold; Theriot, Julie A

    2016-05-01

    Vascular endothelial cells act as gatekeepers that protect underlying tissue from blood-borne toxins and pathogens. Nevertheless, endothelial cells are able to internalize large fibrin clots and apoptotic debris from the bloodstream, although the precise mechanism of such phagocytosis-like uptake is unknown. We show that cultured primary human endothelial cells (HUVEC) internalize both pathogenic and non-pathogenic Listeria bacteria comparably, in a phagocytosis-like process. In contrast with previously studied host cell types, including intestinal epithelial cells and hepatocytes, we find that endothelial internalization of Listeria is independent of all known pathogenic bacterial surface proteins. Consequently, we exploited the internalization and intracellular replication of L. monocytogenes to identify distinct host cell factors that regulate phagocytosis-like uptake in HUVEC. Using siRNA screening and subsequent genetic and pharmacologic perturbations, we determined that endothelial infectivity was modulated by cytoskeletal proteins that normally modulate global architectural changes, including phosphoinositide-3-kinase, focal adhesions, and the small GTPase Rho. We found that Rho kinase (ROCK) is acutely necessary for adhesion of Listeria to endothelial cells, whereas the actin-nucleating formins FHOD1 and FMNL3 specifically regulate internalization of bacteria as well as inert beads, demonstrating that formins regulate endothelial phagocytosis-like uptake independent of the specific cargo. Finally, we found that neither ROCK nor formins were required for macrophage phagocytosis of L. monocytogenes, suggesting that endothelial cells have distinct requirements for bacterial internalization from those of classical professional phagocytes. Our results identify a novel pathway for L. monocytogenes uptake by human host cells, indicating that this wily pathogen can invade a variety of tissues by using a surprisingly diverse suite of distinct uptake mechanisms that

  10. Endothelial Cells Use a Formin-Dependent Phagocytosis-Like Process to Internalize the Bacterium Listeria monocytogenes

    PubMed Central

    Rengarajan, Michelle; Hayer, Arnold; Theriot, Julie A.

    2016-01-01

    Vascular endothelial cells act as gatekeepers that protect underlying tissue from blood-borne toxins and pathogens. Nevertheless, endothelial cells are able to internalize large fibrin clots and apoptotic debris from the bloodstream, although the precise mechanism of such phagocytosis-like uptake is unknown. We show that cultured primary human endothelial cells (HUVEC) internalize both pathogenic and non-pathogenic Listeria bacteria comparably, in a phagocytosis-like process. In contrast with previously studied host cell types, including intestinal epithelial cells and hepatocytes, we find that endothelial internalization of Listeria is independent of all known pathogenic bacterial surface proteins. Consequently, we exploited the internalization and intracellular replication of L. monocytogenes to identify distinct host cell factors that regulate phagocytosis-like uptake in HUVEC. Using siRNA screening and subsequent genetic and pharmacologic perturbations, we determined that endothelial infectivity was modulated by cytoskeletal proteins that normally modulate global architectural changes, including phosphoinositide-3-kinase, focal adhesions, and the small GTPase Rho. We found that Rho kinase (ROCK) is acutely necessary for adhesion of Listeria to endothelial cells, whereas the actin-nucleating formins FHOD1 and FMNL3 specifically regulate internalization of bacteria as well as inert beads, demonstrating that formins regulate endothelial phagocytosis-like uptake independent of the specific cargo. Finally, we found that neither ROCK nor formins were required for macrophage phagocytosis of L. monocytogenes, suggesting that endothelial cells have distinct requirements for bacterial internalization from those of classical professional phagocytes. Our results identify a novel pathway for L. monocytogenes uptake by human host cells, indicating that this wily pathogen can invade a variety of tissues by using a surprisingly diverse suite of distinct uptake mechanisms that

  11. A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography

    SciTech Connect

    Raguvarun, K. Balasubramaniam, Krishnan Rajagopal, Prabhu; Palanisamy, Suresh; Nagarajah, Romesh; Kapoor, Ajay; Hoye, Nicholas; Curiri, Dominic

    2015-03-31

    Additive manufacturing methods are gaining increasing popularity for rapidly and efficiently manufacturing parts and components in the industrial context, as well as for domestic applications. However, except when used for prototyping or rapid visualization of components, industries are concerned with the load carrying capacity and strength achievable by additive manufactured parts. In this paper, the wire-arc additive manufacturing (AM) process based on gas tungsten arc welding (GTAW) has been examined for the internal structure and constitution of components generated by the process. High-resolution 3D X-ray tomography is used to gain cut-views through wedge-shaped parts created using this GTAW additive manufacturing process with titanium alloy materials. In this work, two different control conditions for the GTAW process are considered. The studies reveal clusters of porosities, located in periodic spatial intervals along the sample cross-section. Such internal defects can have a detrimental effect on the strength of the resulting AM components, as shown in destructive testing studies. Closer examination of this phenomenon shows that defect clusters are preferentially located at GTAW traversal path intervals. These results highlight the strong need for enhanced control of process parameters in ensuring components with minimal defects and higher strength.

  12. The Evolution of a Collaborative Concept Mapping Activity for Undergraduate Microbiology Students

    ERIC Educational Resources Information Center

    Kinchin, Ian M.; De-Leij, Frans A. A. M.; Hay, David B.

    2005-01-01

    Concept mapping activities were trialed over a 2 year period as part of an undergraduate microbiology course. This paper describes this developmental process and offers insight into the most beneficial ways of employing this tool in a higher education setting. The aim was to investigate the use of mapping activities to improve students'…

  13. Clinical Application Projects (CAPs) for Health Science Students in Introductory Microbiology.

    ERIC Educational Resources Information Center

    Halyard, Rebecca A.

    Clinical Application Projects (CAPs) have been developed that allow dental hygiene and nursing students to apply introductory microbiology principles and skills learned in lecture and laboratory to a problem in an appropriate clinical situation. CAPs therefore substitute for the traditional study of "unknowns". Principles and processes emphasized…

  14. Second international symposium on the mechanical integrity of process piping: Proceedings

    SciTech Connect

    Sims, J.R.; Aller, J.E.; Becht, C. IV; Reynolds, J.T.; Salot, W.J.; Sanders, B.J.; Springer, S.P.

    1996-07-01

    The mechanical integrity of process piping continues to be a major concern for companies in the petroleum refining, chemical, and other process industries. According to a 1993 report, 41% of the 170 largest industry losses in the hydrocarbon process industry resulted from failures of piping systems. This volume contains 30 papers divided into the following topical sections: Design, specifications, and erection; Materials of construction; Inspection and monitoring; Risk and reliability; Regulations and codes; and Fabrication, repair, and modification. All papers have been processed separately for inclusion on the data base.

  15. PREFACE: First International Workshop on Nonequilibrium Processes in Plasma Physics and Studies of Environment

    NASA Astrophysics Data System (ADS)

    Petrović, Z. Lj; Malović, G.; Tasić, M.; Nikitović, Ž.

    2007-06-01

    This volume is a collection of papers associated with a series of invited lectures presented at the First Workshop on Nonequilibrium processes in Plasma Physics and studies of Environment that was held at Mt Kopaonik in August 2006. The workshop originated as a part of the FP6 COE 026328 which had the basic aim of promoting centers of excellence in Western Balkan countries, to facilitate dissemination of their results and to help them establish themselves in the broader arena of European and international science. So the best way to achieve all those goals was to prepare a workshop associated with the local conference SPIG (Symposium on Physics of Ionized Gases) where the participants could attend sessions in which the host Laboratory presented progress reports and papers and thereby gain a full perspective of our results. At the same time this allowed participants in the COE the opportunity to compare their results with the results of external speakers and to gain new perspectives and knowledge. The program of the workshop was augmented by inviting some of our colleagues who visited the COE in recent years or have an active collaboration with a participating member. In that respect this volume is not only a proceedings of the workshop but a collection of papers related to the topic of the workshop: Non-equilibrium phenomena in plasmas and in the science of our environment. The idea is to offer review articles either summarizing a broader area of published or about to be published work or to give overviews showing preliminary results of the works in progress. The refereeing of the papers consisted of two parts, first in selection of the invitees and second in checking the submitted manuscripts. The papers were refereed to the standard of the Journal. As the program of the COE covers a wide area of topics from application of plasmas in nano- electronics to monitoring and removal of pollutants in the atmosphere, so the program of the workshop covered an even broader

  16. [Sterilization--the microbiology between claim and reality].

    PubMed

    Spicher, G

    1993-05-01

    Sterilization means to free an object from all living and viable germs. To fulfill this claim, the microbiology is confronted with some fundamental problems. Under the action of a microbicidal agent the microorganisms do not die at the same time, even if there is a homogeneous population. The destruction of microorganisms follows a special destruction order. The number of dying organisms is always proportional to the number of viable organisms present. On theoretical grounds it is, therefore, impossible to free an object from all living and viable germs; there will ever be left a certain proportion of viable germs, even if this proportion may be very small. The aim of sterilization must be to keep that proportion very small. To reach this goal in a practical time without damaging the objects to be sterilized, microorganisms of high resistance should be excluded, i.e. the objects to be sterilized should not be contaminated by microorganisms of high resistance to the sterilizing agent(s). The assurance level that an object is free from all living and viable germs must be so high that it is practically impossible to proof this by a test for sterility. On the other hand, the absence of microorganisms of high resistance in the objects to be sterilized makes it feasible to use microorganisms of high resistance as test organisms for the manufacture of microbiologic indicators. Such indicators enable to record as an integral the action of all microbicidal parameters of the noxious agent(s) far beyond the region for which the application of a test for sterility is sensible. Nevertheless, bioindicators have a similar status as the physical and physico-chemical controlling instruments. Microbiological indicators make it possible to guarantee the application of a certain (minimal) efficacy of the microbicidal agent(s). Whether this efficacy is sufficient to reach the wanted sterility assurance level depends, last not least, on the microbiological contamination (bioburden) of

  17. PREFACE: First International Workshop on Nonequilibrium Processes in Plasma Physics and Studies of Environment

    NASA Astrophysics Data System (ADS)

    Petrović, Z. Lj; Malović, G.; Tasić, M.; Nikitović, Ž.

    2007-06-01

    This volume is a collection of papers associated with a series of invited lectures presented at the First Workshop on Nonequilibrium processes in Plasma Physics and studies of Environment that was held at Mt Kopaonik in August 2006. The workshop originated as a part of the FP6 COE 026328 which had the basic aim of promoting centers of excellence in Western Balkan countries, to facilitate dissemination of their results and to help them establish themselves in the broader arena of European and international science. So the best way to achieve all those goals was to prepare a workshop associated with the local conference SPIG (Symposium on Physics of Ionized Gases) where the participants could attend sessions in which the host Laboratory presented progress reports and papers and thereby gain a full perspective of our results. At the same time this allowed participants in the COE the opportunity to compare their results with the results of external speakers and to gain new perspectives and knowledge. The program of the workshop was augmented by inviting some of our colleagues who visited the COE in recent years or have an active collaboration with a participating member. In that respect this volume is not only a proceedings of the workshop but a collection of papers related to the topic of the workshop: Non-equilibrium phenomena in plasmas and in the science of our environment. The idea is to offer review articles either summarizing a broader area of published or about to be published work or to give overviews showing preliminary results of the works in progress. The refereeing of the papers consisted of two parts, first in selection of the invitees and second in checking the submitted manuscripts. The papers were refereed to the standard of the Journal. As the program of the COE covers a wide area of topics from application of plasmas in nano- electronics to monitoring and removal of pollutants in the atmosphere, so the program of the workshop covered an even broader

  18. Internal acid buffering in San Joaquin Valley fog drops and its influence on aerosol processing

    NASA Astrophysics Data System (ADS)

    Collett, Jeffrey L.; Hoag, Katherine J.; Rao, Xin; Pandis, Spyros N.

    Although several chemical pathways exist for S(IV) oxidation in fogs and clouds, many are self-limiting: as sulfuric acid is produced and the drop pH declines, the rates of these pathways also decline. Some of the acid that is produced can be buffered by uptake of gaseous ammonia. Additional internal buffering can result from protonation of weak and strong bases present in solution. Acid titrations of high pH fog samples (median pH=6.49) collected in California's San Joaquin Valley reveal the presence of considerable internal acid buffering. In samples collected at a rural location, the observed internal buffering could be nearly accounted for based on concentrations of ammonia and bicarbonate present in solution. In samples collected in the cities of Fresno and Bakersfield, however, significant additional, unexplained buffering was present over a pH range extending from approximately four to seven. The additional buffering was found to be associated with dissolved compounds in the fogwater. It could not be accounted for by measured concentrations of low molecular weight ( C1- C3) carboxylic acids, S(IV), phosphate, or nitrophenols. The amount of unexplained buffering in individual fog samples was found to correlate strongly with the sum of sample acetate and formate concentrations, suggesting that unmeasured organic species may be important contributors. Simulation of a Bakersfield fog episode with and without the additional, unexplained buffering revealed a significant impact on the fog chemistry. When the additional buffering was included, the simulated fog pH remained 0.3-0.7 pH units higher and the amount of sulfate present after the fog evaporated was increased by 50%. Including the additional buffering in the model simulation did not affect fogwater nitrate concentrations and was found to slightly decrease ammonium concentrations. The magnitude of the buffering effect on aqueous sulfate production is sensitive to the amount of ozone present to oxidize S

  19. Communication: GAIMS—Generalized Ab Initio Multiple Spawning for both internal conversion and intersystem crossing processes

    NASA Astrophysics Data System (ADS)

    Curchod, Basile F. E.; Rauer, Clemens; Marquetand, Philipp; González, Leticia; Martínez, Todd J.

    2016-03-01

    Full multiple spawning is a formally exact method to describe the excited-state dynamics of molecular systems beyond the Born-Oppenheimer approximation. However, it has been limited until now to the description of radiationless transitions taking place between electronic states with the same spin multiplicity. This Communication presents a generalization of the full and ab initio multiple spawning methods to both internal conversion (mediated by nonadiabatic coupling terms) and intersystem crossing events (triggered by spin-orbit coupling matrix elements) based on a spin-diabatic representation. The results of two numerical applications, a model system and the deactivation of thioformaldehyde, validate the presented formalism and its implementation.

  20. Promoting microbiology education through the iGEM synthetic biology competition.

    PubMed

    Kelwick, Richard; Bowater, Laura; Yeoman, Kay H; Bowater, Richard P

    2015-08-01

    Synthetic biology has developed rapidly in the 21st century. It covers a range of scientific disciplines that incorporate principles from engineering to take advantage of and improve biological systems, often applied to specific problems. Methods important in this subject area include the systematic design and testing of biological systems and, here, we describe how synthetic biology projects frequently develop microbiology skills and education. Synthetic biology research has huge potential in biotechnology and medicine, which brings important ethical and moral issues to address, offering learning opportunities about the wider impact of microbiological research. Synthetic biology projects have developed into wide-ranging training and educational experiences through iGEM, the International Genetically Engineered Machines competition. Elements of the competition are judged against specific criteria and teams can win medals and prizes across several categories. Collaboration is an important element of iGEM, and all DNA constructs synthesized by iGEM teams are made available to all researchers through the Registry for Standard Biological Parts. An overview of microbiological developments in the iGEM competition is provided. This review is targeted at educators that focus on microbiology and synthetic biology, but will also be of value to undergraduate and postgraduate students with an interest in this exciting subject area.