An EXCEL macro for importing log ASCII standard (LAS) files into EXCEL worksheets

NASA Astrophysics Data System (ADS)

Özkaya, Sait Ismail

1996-02-01

An EXCEL 5.0 macro is presented for converting a LAS text file into an EXCEL worksheet. Although EXCEL has commands for importing text files and parsing text lines, LAS files must be decoded line-by-line because three different delimiters are used to separate fields of differing length. The macro is intended to eliminate manual decoding of LAS version 2.0. LAS is a floppy disk format for storage and transfer of log data as text files. LAS was proposed by the Canadian Well Logging Society. The present EXCEL macro decodes different sections of a LAS file, separates, and places the fields into different columns of an EXCEL worksheet. To import a LAS file into EXCEL without errors, the file must not contain any unrecognized symbols, and the data section must be the last section. The program does not check for the presence of mandatory sections or fields as required by LAS rules. Once a file is incorporated into EXCEL, mandatory sections and fields may be inspected visually.

Applying 'evidence-based medicine' theory to interventional radiology. Part 2: a spreadsheet for swift assessment of procedural benefit and harm.

PubMed

Maceneaney, P M; Malone, D E

2000-12-01

To design a spreadsheet program to analyse interventional radiology (IR) data rapidly produced in local research or reported in the literature using 'evidence-based medicine' (EBM) parameters of treatment benefit and harm. Microsoft Excel(TM)was used. The spreadsheet consists of three worksheets. The first shows the 'Levels of Evidence and Grades of Recommendations' that can be assigned to therapeutic studies as defined by the Oxford Centre for EBM. The second and third worksheets facilitate the EBM assessment of therapeutic benefit and harm. Validity criteria are described. These include the assessment of the adequacy of sample size in the detection of possible procedural complications. A contingency (2 x 2) table for raw data on comparative outcomes in treated patients and controls has been incorporated. Formulae for EBM calculations are related to these numerators and denominators in the spreadsheet. The parameters calculated are benefit - relative risk reduction, absolute risk reduction, number needed to treat (NNT). Harm - relative risk, relative odds, number needed to harm (NNH). Ninety-five per cent confidence intervals are calculated for all these indices. The results change automatically when the data in the therapeutic outcome cells are changed. A final section allows the user to correct the NNT or NNH in their application to individual patients. This spreadsheet can be used on desktop and palmtop computers. The MS Excel(TM)version can be downloaded via the Internet from the URL ftp://radiography.com/pub/TxHarm00.xls. A spreadsheet is useful for the rapid analysis of the clinical benefit and harm from IR procedures.

Lyme Disease Data

MedlinePlus

... County-level Lyme disease data from 2000-2016 Microsoft Excel file [Excel CSV – 209KB] ––Right–click the link ... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel file Audio/Video file Apple Quicktime file RealPlayer ...

Getting more from accuracy and response time data: methods for fitting the linear ballistic accumulator.

PubMed

Donkin, Chris; Averell, Lee; Brown, Scott; Heathcote, Andrew

2009-11-01

Cognitive models of the decision process provide greater insight into response time and accuracy than do standard ANOVA techniques. However, such models can be mathematically and computationally difficult to apply. We provide instructions and computer code for three methods for estimating the parameters of the linear ballistic accumulator (LBA), a new and computationally tractable model of decisions between two or more choices. These methods-a Microsoft Excel worksheet, scripts for the statistical program R, and code for implementation of the LBA into the Bayesian sampling software WinBUGS-vary in their flexibility and user accessibility. We also provide scripts in R that produce a graphical summary of the data and model predictions. In a simulation study, we explored the effect of sample size on parameter recovery for each method. The materials discussed in this article may be downloaded as a supplement from http://brm.psychonomic-journals.org/content/supplemental.

Conducting Automated Test Assembly Using the Premium Solver Platform Version 7.0 with Microsoft Excel and the Large-Scale LP/QP Solver Engine Add-In

ERIC Educational Resources Information Center

Cor, Ken; Alves, Cecilia; Gierl, Mark J.

2008-01-01

This review describes and evaluates a software add-in created by Frontline Systems, Inc., that can be used with Microsoft Excel 2007 to solve large, complex test assembly problems. The combination of Microsoft Excel 2007 with the Frontline Systems Premium Solver Platform is significant because Microsoft Excel is the most commonly used spreadsheet…

The Teaching and Learning of Chemical Kinetics Supported with MS Excel

ERIC Educational Resources Information Center

Zain, Sharifuddin Md; Rahman, Noorsaadah Abdul; Chin, Lee Sui

2013-01-01

Students in 12 secondary schools in three states of Malaysia were taught to use worksheets on the chemical kinetics topic which had been pre-created using the MS Excel worksheets. After the teaching, an opinion survey of 612 Form Six students from these schools was conducted. The results showed that almost all the students felt that MS Excel…

An Excel Workbook for Identifying Redox Processes in Ground Water

USGS Publications Warehouse

Jurgens, Bryant C.; McMahon, Peter B.; Chapelle, Francis H.; Eberts, Sandra M.

2009-01-01

The reduction/oxidation (redox) condition of ground water affects the concentration, transport, and fate of many anthropogenic and natural contaminants. The redox state of a ground-water sample is defined by the dominant type of reduction/oxidation reaction, or redox process, occurring in the sample, as inferred from water-quality data. However, because of the difficulty in defining and applying a systematic redox framework to samples from diverse hydrogeologic settings, many regional water-quality investigations do not attempt to determine the predominant redox process in ground water. Recently, McMahon and Chapelle (2008) devised a redox framework that was applied to a large number of samples from 15 principal aquifer systems in the United States to examine the effect of redox processes on water quality. This framework was expanded by Chapelle and others (in press) to use measured sulfide data to differentiate between iron(III)- and sulfate-reducing conditions. These investigations showed that a systematic approach to characterize redox conditions in ground water could be applied to datasets from diverse hydrogeologic settings using water-quality data routinely collected in regional water-quality investigations. This report describes the Microsoft Excel workbook, RedoxAssignment_McMahon&Chapelle.xls, that assigns the predominant redox process to samples using the framework created by McMahon and Chapelle (2008) and expanded by Chapelle and others (in press). Assignment of redox conditions is based on concentrations of dissolved oxygen (O2), nitrate (NO3-), manganese (Mn2+), iron (Fe2+), sulfate (SO42-), and sulfide (sum of dihydrogen sulfide [aqueous H2S], hydrogen sulfide [HS-], and sulfide [S2-]). The logical arguments for assigning the predominant redox process to each sample are performed by a program written in Microsoft Visual Basic for Applications (VBA). The program is called from buttons on the main worksheet. The number of samples that can be analyzed is only limited by the number of rows in Excel (65,536 for Excel 2003 and XP; and 1,048,576 for Excel 2007), and is therefore appropriate for large datasets.

Microsoft Excel Software Usage for Teaching Science and Engineering Curriculum

ERIC Educational Resources Information Center

Singh, Gurmukh; Siddiqui, Khalid

2009-01-01

In this article, our main objective is to present the use of Microsoft Software Excel 2007/2003 for teaching college and university level curriculum in science and engineering. In particular, we discuss two interesting and fascinating examples of interactive applications of Microsoft Excel targeted for undergraduate students in: 1) computational…

Data on volatile compounds in fermented materials used for salmon fish sauce production.

PubMed

Nakano, Mitsutoshi; Sagane, Yoshimasa; Koizumi, Ryosuke; Nakazawa, Yozo; Yamazaki, Masao; Watanabe, Toshihiro; Takano, Katsumi; Sato, Hiroaki

2018-02-01

This article describes the analysis of volatile compounds in fermented materials used for salmon fish sauce production via gas chromatography/mass spectrometry (GC/MS). Ten types of fish sauces were produced from raw salmon materials, including various proportions of flesh, viscera, inedible portion (heads, fins, and backbones), and soft roe, by mixing them with salt and allowing them to ferment for up to three months. The volatile compounds were captured by a solid-phase microextraction method and then applied to GC/MS for separation and identification of the compounds in the fish sauce products. The number of volatile compounds identified in the starting materials varied from 15 to 29 depending on the ingredients. The number of compounds in the final fish sauce products was reduced by 3.4-94.7% of that in the original material. The retention times and names of the identified compounds, as well as their relative peak areas, are provided in a Microsoft Excel Worksheet.

75 FR 14401 - Amendment of Certain of the Commission's Rules of Practice and Procedure and Rules of Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-25

... were created, such as Microsoft Excel, Microsoft Word, or Microsoft PowerPoint (``native format'')? We... (condensed) or expanded (detailed) format Export search results to Excel or PDF As noted above, system is...., Microsoft Word ``.doc'' format or non-copy protected text- searchable ``.pdf'' format)? Should submissions...

Real cases study through computer applications for futures Agricultural Engineers

NASA Astrophysics Data System (ADS)

Moratiel, R.; Durán, J. M.; Tarquis, A. M.

2010-05-01

One of the huge concerns on the higher engineer education is the lag of real cases study that the future professionals need in the work and corporation market. This concern was reflected in Bologna higher education system including recommendations in this respect. The knowhow as why this or other methodology is one of the keys to resolve this problem. In the last courses given in Department of Crop Production, at the Agronomy Engineer School of Madrid (Escuela Técnica Superior de Ingenieros Agrónomos, UPM) we have developed more than one hundred applications in Microsoft Excel®. Our aim was to show different real scenarios which the future Agronomic Engineers can be found in their professional life and with items related to crop production field. In order to achieve our target, each application in Excel presents a file text in which is explained the theoretical concepts and the objectives, as well as some resources used from Excel syntax. In this way, the student can understand and use of such application, even they can modify and customize it for a real case presented in their context and/or master project. This electronic monograph gives an answer to the need to manage data in several real scenarios showed in lectures, calculus resolution, information analysis and manage worksheets in a professional and student level.

Can There Be Excellence in Education without Knowledge of Child Development?

ERIC Educational Resources Information Center

Kamii, Constance

Developmentalists are convinced that within each young child a process of unfolding occurs to regulate learning in ways that make worksheets and the "force-feeding" of isolated skills inappropriate. Still, worksheets are enormously popular in early education, and math education assumes that number is learned through internalization. Why…

[MapDraw: a microsoft excel macro for drawing genetic linkage maps based on given genetic linkage data].

PubMed

Liu, Ren-Hu; Meng, Jin-Ling

2003-05-01

MAPMAKER is one of the most widely used computer software package for constructing genetic linkage maps.However, the PC version, MAPMAKER 3.0 for PC, could not draw the genetic linkage maps that its Macintosh version, MAPMAKER 3.0 for Macintosh,was able to do. Especially in recent years, Macintosh computer is much less popular than PC. Most of the geneticists use PC to analyze their genetic linkage data. So a new computer software to draw the same genetic linkage maps on PC as the MAPMAKER for Macintosh to do on Macintosh has been crying for. Microsoft Excel,one component of Microsoft Office package, is one of the most popular software in laboratory data processing. Microsoft Visual Basic for Applications (VBA) is one of the most powerful functions of Microsoft Excel. Using this program language, we can take creative control of Excel, including genetic linkage map construction, automatic data processing and more. In this paper, a Microsoft Excel macro called MapDraw is constructed to draw genetic linkage maps on PC computer based on given genetic linkage data. Use this software,you can freely construct beautiful genetic linkage map in Excel and freely edit and copy it to Word or other application. This software is just an Excel format file. You can freely copy it from ftp://211.69.140.177 or ftp://brassica.hzau.edu.cn and the source code can be found in Excel's Visual Basic Editor.

76 FR 12091 - Commission Information Collection Activities, Proposed Collections; Comment Request; Extension

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... Microsoft Excel version of the Form 561. The Microsoft Excel version of the Form 561 has been available... of the Excel software to make filling the form out easier and compiling the filed information more...

[Development of a Text-Data Based Learning Tool That Integrates Image Processing and Displaying].

PubMed

Shinohara, Hiroyuki; Hashimoto, Takeyuki

2015-01-01

We developed a text-data based learning tool that integrates image processing and displaying by Excel. Knowledge required for programing this tool is limited to using absolute, relative, and composite cell references and learning approximately 20 mathematical functions available in Excel. The new tool is capable of resolution translation, geometric transformation, spatial-filter processing, Radon transform, Fourier transform, convolutions, correlations, deconvolutions, wavelet transform, mutual information, and simulation of proton density-, T1-, and T2-weighted MR images. The processed images of 128 x 128 pixels or 256 x 256 pixels are observed directly within Excel worksheets without using any particular image display software. The results of image processing using this tool were compared with those using C language and the new tool was judged to have sufficient accuracy to be practically useful. The images displayed on Excel worksheets were compared with images using binary-data display software. This comparison indicated that the image quality of the Excel worksheets was nearly equal to the latter in visual impressions. Since image processing is performed by using text-data, the process is visible and facilitates making contrasts by using mathematical equations within the program. We concluded that the newly developed tool is adequate as a computer-assisted learning tool for use in medical image processing.

Overcoming Microsoft Excel's Weaknesses for Crop Model Building and Simulations

ERIC Educational Resources Information Center

Sung, Christopher Teh Boon

2011-01-01

Using spreadsheets such as Microsoft Excel for building crop models and running simulations can be beneficial. Excel is easy to use, powerful, and versatile, and it requires the least proficiency in computer programming compared to other programming platforms. Excel, however, has several weaknesses: it does not directly support loops for iterative…

A vibration model for centrifugal contactors

NASA Astrophysics Data System (ADS)

Leonard, R. A.; Wasserman, M. O.; Wygmans, D. G.

1992-11-01

Using the transfer matrix method, we created the Excel worksheet 'Beam' for analyzing vibrations in centrifugal contactors. With this worksheet, a user can calculate the first natural frequency of the motor/rotor system for a centrifugal contactor. We determined a typical value for the bearing stiffness (k(sub B)) of a motor after measuring the k(sub B) value for three different motors. The k(sub B) value is an important parameter in this model, but it is not normally available for motors. The assumptions that we made in creating the Beam worksheet were verified by comparing the calculated results with those from a VAX computer program, BEAM IV. The Beam worksheet was applied to several contactor designs for which we have experimental data and found to work well.

[Application of three compartment model and response surface model to clinical anesthesia using Microsoft Excel].

PubMed

Abe, Eiji; Abe, Mari

2011-08-01

With the spread of total intravenous anesthesia, clinical pharmacology has become more important. We report Microsoft Excel file applying three compartment model and response surface model to clinical anesthesia. On the Microsoft Excel sheet, propofol, remifentanil and fentanyl effect-site concentrations are predicted (three compartment model), and probabilities of no response to prodding, shaking, surrogates of painful stimuli and laryngoscopy are calculated using predicted effect-site drug concentration. Time-dependent changes in these calculated values are shown graphically. Recent development in anesthetic drug interaction studies are remarkable, and its application to clinical anesthesia with this Excel file is simple and helpful for clinical anesthesia.

78 FR 45542 - Request for Information: The National Institute of Environmental Health Sciences/National...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-29

... submitted electronically in Microsoft Excel or Word formats to [email protected] . FOR FURTHER... recommendations should be submitted electronically in Microsoft Excel or Word format. Respondents to this request...

Using Microsoft Excel to Generate Usage Statistics

ERIC Educational Resources Information Center

Spellman, Rosemary

2011-01-01

At the Libraries Service Center, statistics are generated on a monthly, quarterly, and yearly basis by using four Microsoft Excel workbooks. These statistics provide information about what materials are being requested and by whom. They also give details about why certain requests may not have been filled. Utilizing Excel allows for a shallower…

A guide for the laboratory information management system (LIMS) for light stable isotopes--Versions 7 and 8

USGS Publications Warehouse

Coplen, Tyler B.

2000-01-01

The reliability and accuracy of isotopic data can be improved by utilizing database software to (i) store information about samples, (ii) store the results of mass spectrometric isotope-ratio analyses of samples, (iii) calculate analytical results using standardized algorithms stored in a database, (iv) normalize stable isotopic data to international scales using isotopic reference materials, and (v) generate multi-sheet paper templates for convenient sample loading of automated mass-spectrometer sample preparation manifolds. Such a database program, the Laboratory Information Management System (LIMS) for Light Stable Isotopes, is presented herein. Major benefits of this system include (i) a dramatic improvement in quality assurance, (ii) an increase in laboratory efficiency, (iii) a reduction in workload due to the elimination or reduction of retyping of data by laboratory personnel, and (iv) a decrease in errors in data reported to sample submitters. Such a database provides a complete record of when and how often laboratory reference materials have been analyzed and provides a record of what correction factors have been used through time. It provides an audit trail for laboratories. LIMS for Light Stable Isotopes is available for both Microsoft Office 97 Professional and Microsoft Office 2000 Professional as versions 7 and 8, respectively. Both source code (mdb file) and precompiled executable files (mde) are available. Numerous improvements have been made for continuous flow isotopic analysis in this version (specifically 7.13 for Microsoft Access 97 and 8.13 for Microsoft Access 2000). It is much easier to import isotopic results from Finnigan ISODAT worksheets, even worksheets on which corrections for amount of sample (linearity corrections) have been added. The capability to determine blank corrections using isotope mass balance from analyses of elemental analyzer samples has been added. It is now possible to calculate and apply drift corrections to isotopic data based on the time of day of analysis. Whereas Finnigan ISODAT software is confined to using only a single peak for calculating delta values, LIMS now enables one to use the mean of two or more reference injections during a continuous flow analysis to calculate delta values. This is useful with Finnigan?s GasBench II online sample preparation system. Concentrations of carbon, nitrogen, and sulfur can be calculated based one or more isotopic reference materials analyzed with a group of samples. Both sample data and isotopic analysis data can now be exported to Excel files. A calculator for determining the amount of sample needed for isotopic analysis based on a previous amount of sample and continuous flow area is now an integral part of LIMS for Light Stable Isotopes. LIMS for Light Stable Isotopes can now assign an error code to Finnigan elemental analyzer analyses in which one of the electrometers has saturated due to analysis of too much sample material, giving rise to incorrect isotopic abundances. Information on downloading this report and downloading code and databases is provided at the Internet addresses: http://water.usgs.gov/software/geochemical.html or http://www.geogr.uni-jena.de/software/geochemical.html in the Eastern Hemisphere.

When Spreadsheets Become Software - Quality Control Challenges and Approaches - 13360

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fountain, Stefanie A.; Chen, Emmie G.; Beech, John F.

2013-07-01

As part of a preliminary waste acceptance criteria (PWAC) development, several commercial models were employed, including the Hydrologic Evaluation of Landfill Performance model (HELP) [1], the Disposal Unit Source Term - Multiple Species model (DUSTMS) [2], and the Analytical Transient One, Two, and Three-Dimensional model (AT123D) [3]. The results of these models were post-processed in MS Excel spreadsheets to convert the model results to alternate units, compare the groundwater concentrations to the groundwater concentration thresholds, and then to adjust the waste contaminant masses (based on average concentration over the waste volume) as needed in an attempt to achieve groundwater concentrationsmore » at the limiting point of assessment that would meet the compliance concentrations while maximizing the potential use of the landfill (i.e., maximizing the volume of projected waste being generated that could be placed in the landfill). During the course of the PWAC calculation development, one of the Microsoft (MS) Excel spreadsheets used to post-process the results of the commercial model packages grew to include more than 575,000 formulas across 18 worksheets. This spreadsheet was used to assess six base scenarios as well as nine uncertainty/sensitivity scenarios. The complexity of the spreadsheet resulted in the need for a rigorous quality control (QC) procedure to verify data entry and confirm the accuracy of formulas. (authors)« less

The Effect of Using Microsoft Excel in a High School Algebra Class

ERIC Educational Resources Information Center

Neurath, Rachel A.; Stephens, Larry J.

2006-01-01

The purpose of this study was to investigate the effect of integrating Microsoft Excel into a high school algebra class. The results indicate a slight increase in student achievement when Excel was used. A teacher-created final exam and two Criterion Referenced Tests measured success. One of the Criterion Referenced Tests indicated that the…

Creating Single-Subject Design Graphs in Microsoft Excel[TM] 2007

ERIC Educational Resources Information Center

Dixon, Mark R.; Jackson, James W.; Small, Stacey L.; Horner-King, Mollie J.; Mui Ker Lik, Nicholas; Garcia, Yors; Rosales, Rocio

2009-01-01

Over 10 years have passed since the publication of Carr and Burkholder's (1998) technical article on how to construct single-subject graphs using Microsoft Excel. Over the course of the past decade, the Excel program has undergone a series of revisions that make the Carr and Burkholder paper somewhat difficult to follow with newer versions. The…

Creating single-subject design graphs in Microsoft Excel 2007.

PubMed

Dixon, Mark R; Jackson, James W; Small, Stacey L; Horner-King, Mollie J; Lik, Nicholas Mui Ker; Garcia, Yors; Rosales, Rocio

2009-01-01

Over 10 years have passed since the publication of Carr and Burkholder's (1998) technical article on how to construct single-subject graphs using Microsoft Excel. Over the course of the past decade, the Excel program has undergone a series of revisions that make the Carr and Burkholder paper somewhat difficult to follow with newer versions. The present article provides task analyses for constructing various types of commonly used single-subject design graphs in Microsoft Excel 2007. The task analyses were evaluated using a between-subjects design that compared the graphing skills of 22 behavior-analytic graduate students using Excel 2007 and either the Carr and Burkholder or newly developed task analyses. Results indicate that the new task analyses yielded more accurate and faster graph construction than the Carr and Burkholder instructions.

An add-in implementation of the RESAMPLING syntax under Microsoft EXCEL.

PubMed

Meineke, I

2000-10-01

The RESAMPLING syntax defines a set of powerful commands, which allow the programming of probabilistic statistical models with few, easily memorized statements. This paper presents an implementation of the RESAMPLING syntax using Microsoft EXCEL with Microsoft WINDOWS(R) as a platform. Two examples are given to demonstrate typical applications of RESAMPLING in biomedicine. Details of the implementation with special emphasis on the programming environment are discussed at length. The add-in is available electronically to interested readers upon request. The use of the add-in facilitates numerical statistical analyses of data from within EXCEL in a comfortable way.

CDC Vital Signs: Adult Smoking among People with Mental Illness

MedlinePlus

... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel ... National Center for Chronic Disease Prevention and Health Promotion, Office on Smoking and Health Page maintained by: Office ...

Photos of MRSA Infections

MedlinePlus

... and Team Healthcare Providers Prevention Information and Advice Posters for the Athletic Community General MRSA Information and ... site? Adobe PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel file Audio/Video file Apple ...

Scientific Data Analysis Toolkit: A Versatile Add-in to Microsoft Excel for Windows

ERIC Educational Resources Information Center

Halpern, Arthur M.; Frye, Stephen L.; Marzzacco, Charles J.

2018-01-01

Scientific Data Analysis Toolkit (SDAT) is a rigorous, versatile, and user-friendly data analysis add-in application for Microsoft Excel for Windows (PC). SDAT uses the familiar Excel environment to carry out most of the analytical tasks used in data analysis. It has been designed for student use in manipulating and analyzing data encountered in…

An Interactive Microsoft(registered tm) Excel Program for Tracking a Single Evaporating Droplet in Crossflow

NASA Technical Reports Server (NTRS)

Liew, K. H.; Urip, E.; Yang, S. L.; Marek, C. J.

2004-01-01

Droplet interaction with a high temperature gaseous crossflow is important because of its wide application in systems involving two phase mixing such as in combustion requiring quick mixing of fuel and air with the reduction of pollutants and for jet mixing in the dilution zone of combustors. Therefore, the focus of this work is to investigate dispersion of a two-dimensional atomized and evaporating spray jet into a two-dimensional crossflow. An interactive Microsoft Excel program for tracking a single droplet in crossflow that has previously been developed will be modified to include droplet evaporation computation. In addition to the high velocity airflow, the injected droplets are also subjected to combustor temperature and pressure that affect their motion in the flow field. Six ordinary differential equations are then solved by 4th-order Runge-Kutta method using Microsoft Excel software. Microsoft Visual Basic programming and Microsoft Excel macrocode are used to produce the data and plot graphs describing the droplet's motion in the flow field. This program computes and plots the data sequentially without forcing the user to open other types of plotting programs. A user's manual on how to use the program is included.

A Robust Function to Return the Cumulative Density of Non-Central F Distributions in Microsoft Office Excel

ERIC Educational Resources Information Center

Nelson, James Byron

2016-01-01

The manuscript presents a Visual Basic[superscript R] for Applications function that operates within Microsoft Office Excel[superscript R] to return the area below the curve for a given F within a specified non-central F distribution. The function will be of use to Excel users without programming experience wherever a non-central F distribution is…

78 FR 65431 - Notice of Funds Availability (NOFA) Inviting Applications for the Community Development Financial...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... form; (2) a Microsoft Excel Workbook; (3) a Microsoft Word Narrative template; and (4) other mandatory attachments. (Applicants must use the Microsoft Word Narrative template the CDFI Fund provides; alternative...

imDEV: a graphical user interface to R multivariate analysis tools in Microsoft Excel

USDA-ARS?s Scientific Manuscript database

Interactive modules for data exploration and visualization (imDEV) is a Microsoft Excel spreadsheet embedded application providing an integrated environment for the analysis of omics data sets with a user-friendly interface. Individual modules were designed to provide toolsets to enable interactive ...

Illustrating the Central Limit Theorem through Microsoft Excel Simulations

ERIC Educational Resources Information Center

Moen, David H.; Powell, John E.

2005-01-01

Using Microsoft Excel, several interactive, computerized learning modules are developed to demonstrate the Central Limit Theorem. These modules are used in the classroom to enhance the comprehension of this theorem. The Central Limit Theorem is a very important theorem in statistics, and yet because it is not intuitively obvious, statistics…

CREATING SINGLE-SUBJECT DESIGN GRAPHS IN MICROSOFT EXCELTM 2007

PubMed Central

Dixon, Mark R; Jackson, James W; Small, Stacey L; Horner-King, Mollie J; Lik, Nicholas Mui Ker; Garcia, Yors; Rosales, Rocio

2009-01-01

Over 10 years have passed since the publication of Carr and Burkholder's (1998) technical article on how to construct single-subject graphs using Microsoft Excel. Over the course of the past decade, the Excel program has undergone a series of revisions that make the Carr and Burkholder paper somewhat difficult to follow with newer versions. The present article provides task analyses for constructing various types of commonly used single-subject design graphs in Microsoft Excel 2007. The task analyses were evaluated using a between-subjects design that compared the graphing skills of 22 behavior-analytic graduate students using Excel 2007 and either the Carr and Burkholder or newly developed task analyses. Results indicate that the new task analyses yielded more accurate and faster graph construction than the Carr and Burkholder instructions. PMID:19949515

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis.

PubMed

Neyeloff, Jeruza L; Fuchs, Sandra C; Moreira, Leila B

2012-01-20

Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software.

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis

PubMed Central

2012-01-01

Background Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. Findings We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. Conclusions It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software. PMID:22264277

FastStats: Kidney Disease

MedlinePlus

... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel file Audio/Video file Apple Quicktime file RealPlayer file Text file Zip Archive file SAS file ePub file RIS file Page last reviewed: February 18, 2013 Page last updated: March 30, 2017 Content source: ...

Computer-based Astronomy Labs for Non-science Majors

NASA Astrophysics Data System (ADS)

Smith, A. B. E.; Murray, S. D.; Ward, R. A.

1998-12-01

We describe and demonstrate two laboratory exercises, Kepler's Third Law and Stellar Structure, which are being developed for use in an astronomy laboratory class aimed at non-science majors. The labs run with Microsoft's Excel 98 (Macintosh) or Excel 97 (Windows). They can be run in a classroom setting or in an independent learning environment. The intent of the labs is twofold; first and foremost, students learn the subject matter through a series of informational frames. Next, students enhance their understanding by applying their knowledge in lab procedures, while also gaining familiarity with the use and power of a widely-used software package and scientific tool. No mathematical knowledge beyond basic algebra is required to complete the labs or to understand the computations in the spreadsheets, although the students are exposed to the concepts of numerical integration. The labs are contained in Excel workbook files. In the files are multiple spreadsheets, which contain either a frame with information on how to run the lab, material on the subject, or one or more procedures. Excel's VBA macro language is used to automate the labs. The macros are accessed through button interfaces positioned on the spreadsheets. This is done intentionally so that students can focus on learning the subject matter and the basic spreadsheet features without having to learn advanced Excel features all at once. Students open the file and progress through the informational frames to the procedures. After each procedure, student comments and data are automatically recorded in a preformatted Lab Report spreadsheet. Once all procedures have been completed, the student is prompted for a filename in which to save their Lab Report. The lab reports can then be printed or emailed to the instructor. The files will have full worksheet and workbook protection, and will have a "redo" feature at the end of the lab for students who want to repeat a procedure.

An evaluation of knowledge, attitude, and practice of adverse drug reaction reporting among prescribers at a tertiary care hospital.

PubMed

Desai, Chetna K; Iyer, Geetha; Panchal, Jigar; Shah, Samidh; Dikshit, R K

2011-10-01

Spontaneous reporting is an important tool in pharmacovigilance. However, its success depends on cooperative and motivated prescribers. Under-reporting of adverse drug reactions (ADRs) by prescribers is a common problem. The present study was undertaken to evaluate the knowledge, attitude, and practices (KAP) regarding ADR reporting among prescribers at the Civil Hospital, Ahmedabad, to get an insight into the causes of under-reporting of ADRs. A pretested KAP questionnaire comprising of 15 questions (knowledge 6, attitude 5, and practice 4) was administered to 436 prescribers. The questionnaires were assessed for their completeness (maximum score 20) and the type of responses regarding ADR reporting. Microsoft Excel worksheet (Microsoft Office 2007) and Chi-Square test were used for statistical analysis. A total of 260 (61%) prescribers completed the questionnaire (mean score of completion 18.04). The response rate of resident doctors (70.7%) was better than consultants (34.5%) (P < 0.001). ADR reporting was considered important by 97.3% of the respondents; primarily for improving patient safety (28.8%) and identifying new ADRs (24.6%). A majority of the respondents opined that they would like to report serious ADRs (56%). However, only 15% of the prescribers had reported ADRs previously. The reasons cited for this were lack of information on where (70%) and how (68%) to report and the lack of access to reporting forms (49.2%). Preferred methods for reporting were e-mail (56%) and personal communication (42%). The prescribers are aware of the ADRs and the importance of their reporting. However, under reporting and lack of knowledge about the reporting system are clearly evident. Creating awareness about ADR reporting and devising means to make it easy and convenient may aid in improving spontaneous reporting.

Using Microsoft Access: A How-To-Do-It Manual for Librarians. How-To-Do-It Manuals for Librarians, Number 76.

ERIC Educational Resources Information Center

Butler, E. Sonny

Much of what librarians do today requires adeptness in creating and manipulating databases. Many new computers bought by libraries every year come packaged with Microsoft Office and include Microsoft Access. This database program features a seamless interface between Microsoft Office's other programs like Word, Excel, and PowerPoint. This book…

Scabies: Workplace Frequently Asked Questions (FAQs)

MedlinePlus

... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel file Audio/Video file Apple Quicktime file RealPlayer file Text file Zip Archive file SAS file ePub file RIS file Page last reviewed: July 19, 2013 Page last updated: July 19, 2013 Content source: ...

Limitations of Using Microsoft Excel Version 2016 (MS Excel 2016) for Statistical Analysis for Medical Research.

PubMed

Tanavalee, Chotetawan; Luksanapruksa, Panya; Singhatanadgige, Weerasak

2016-06-01

Microsoft Excel (MS Excel) is a commonly used program for data collection and statistical analysis in biomedical research. However, this program has many limitations, including fewer functions that can be used for analysis and a limited number of total cells compared with dedicated statistical programs. MS Excel cannot complete analyses with blank cells, and cells must be selected manually for analysis. In addition, it requires multiple steps of data transformation and formulas to plot survival analysis graphs, among others. The Megastat add-on program, which will be supported by MS Excel 2016 soon, would eliminate some limitations of using statistic formulas within MS Excel.

Year in Review: ASBO's Certificate of Excellence in Financial Reporting.

ERIC Educational Resources Information Center

Gatti, Bernard F.

1995-01-01

Describes the Association of School Business Officials' (ASBO's) Certificate of Excellence for Financial Reporting review process for school district accounting and financial reporting. Describes the Self-Evaluation Worksheet revision, the panel of review members' guide, and highlights of program year 1994. Two figures are included. (LMI)

A Simple Microsoft Excel Method to Predict Antibiotic Outbreaks and Underutilization.

PubMed

Miglis, Cristina; Rhodes, Nathaniel J; Avedissian, Sean N; Zembower, Teresa R; Postelnick, Michael; Wunderink, Richard G; Sutton, Sarah H; Scheetz, Marc H

2017-07-01

Benchmarking strategies are needed to promote the appropriate use of antibiotics. We have adapted a simple regressive method in Microsoft Excel that is easily implementable and creates predictive indices. This method trends consumption over time and can identify periods of over- and underuse at the hospital level. Infect Control Hosp Epidemiol 2017;38:860-862.

Improving Graduate Students' Graphing Skills of Multiple Baseline Designs with Microsoft[R] Excel 2007

ERIC Educational Resources Information Center

Lo, Ya-yu; Starling, A. Leyf Peirce

2009-01-01

This study examined the effects of a graphing task analysis using the Microsoft[R] Office Excel 2007 program on the single-subject multiple baseline graphing skills of three university graduate students. Using a multiple probe across participants design, the study demonstrated a functional relationship between the number of correct graphing…

76 FR 4897 - Submission for OMB Review; OMB Control No. 3090-0291; FSRS Registration and Prime Awardee Entity...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-27

... methods for submitting multiple FFATA subaward reports: A batch upload template using Microsoft Excel, an... three methods for submitting multiple FFATA subaward reports: A batch upload template using Microsoft Excel, an XML report submission template and an XML web service. These methods do take advantage of the...

Teaching Fundamental Skills in Microsoft Excel to First-Year Students in Quantitative Analysis

ERIC Educational Resources Information Center

Rubin, Samuel J.; Abrams, Binyomin

2015-01-01

Despite their technological savvy, most students entering university lack the necessary computer skills to succeed in a quantitative analysis course, in which they are often expected to input, analyze, and plot results of experiments without any previous formal education in Microsoft Excel or similar programs. This lack of formal education results…

Teaching Simulation and Computer-Aided Separation Optimization in Liquid Chromatography by Means of Illustrative Microsoft Excel Spreadsheets

ERIC Educational Resources Information Center

Fasoula, S.; Nikitas, P.; Pappa-Louisi, A.

2017-01-01

A series of Microsoft Excel spreadsheets were developed to simulate the process of separation optimization under isocratic and simple gradient conditions. The optimization procedure is performed in a stepwise fashion using simple macros for an automatic application of this approach. The proposed optimization approach involves modeling of the peak…

PETRO.CALC.PLOT, Microsoft Excel macros to aid petrologic interpretation

USGS Publications Warehouse

Sidder, G.B.

1994-01-01

PETRO.CALC.PLOT is a package of macros which normalizes whole-rock oxide data to 100%, calculates the cation percentages and molecular proportions used for normative mineral calculations, computes the apices for ternary diagrams, determines sums and ratios of specific elements of petrologic interest, and plots 33 X-Y graphs and five ternary diagrams. PETRO.CALC.PLOT also may be used to create other diagrams as desired by the user. The macros run in Microsoft Excel 3.0 and 4.0 for Macintosh computers and in Microsoft Excel 3.0 and 4.0 for Windows. Macros provided in PETRO.CALC.PLOT minimize repetition and time required to recalculate and plot whole-rock oxide data for petrologic analysis. ?? 1994.

FastStats: Chronic Liver Disease and Cirrhosis

MedlinePlus

... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel file Audio/Video file Apple Quicktime file RealPlayer file Text file Zip Archive file SAS file ePub file RIS file Page last reviewed: May 30, 2013 Page last updated: October 6, 2016 Content source: ...

A Simple Method for Reproducing Orbital Plots for Illustration Using Microsoft Paint and Microsoft Excel

NASA Astrophysics Data System (ADS)

Niebuhr, Cole

2018-04-01

Papers published in the astronomical community, particularly in the field of double star research, often contain plots that display the positions of the component stars relative to each other on a Cartesian coordinate plane. Due to the complexities of plotting a three-dimensional orbit into a two-dimensional image, it is often difficult to include an accurate reproduction of the orbit for comparison purposes. Methods to circumvent this obstacle do exist; however, many of these protocols result in low-quality blurred images or require specific and often expensive software. Here, a method is reported using Microsoft Paint and Microsoft Excel to produce high-quality images with an accurate reproduction of a partial orbit.

SNP_tools: A compact tool package for analysis and conversion of genotype data for MS-Excel

PubMed Central

Chen, Bowang; Wilkening, Stefan; Drechsel, Marion; Hemminki, Kari

2009-01-01

Background Single nucleotide polymorphism (SNP) genotyping is a major activity in biomedical research. Scientists prefer to have a facile access to the results which may require conversions between data formats. First hand SNP data is often entered in or saved in the MS-Excel format, but this software lacks genetic and epidemiological related functions. A general tool to do basic genetic and epidemiological analysis and data conversion for MS-Excel is needed. Findings The SNP_tools package is prepared as an add-in for MS-Excel. The code is written in Visual Basic for Application, embedded in the Microsoft Office package. This add-in is an easy to use tool for users with basic computer knowledge (and requirements for basic statistical analysis). Conclusion Our implementation for Microsoft Excel 2000-2007 in Microsoft Windows 2000, XP, Vista and Windows 7 beta can handle files in different formats and converts them into other formats. It is a free software. PMID:19852806

SNP_tools: A compact tool package for analysis and conversion of genotype data for MS-Excel.

PubMed

Chen, Bowang; Wilkening, Stefan; Drechsel, Marion; Hemminki, Kari

2009-10-23

Single nucleotide polymorphism (SNP) genotyping is a major activity in biomedical research. Scientists prefer to have a facile access to the results which may require conversions between data formats. First hand SNP data is often entered in or saved in the MS-Excel format, but this software lacks genetic and epidemiological related functions. A general tool to do basic genetic and epidemiological analysis and data conversion for MS-Excel is needed. The SNP_tools package is prepared as an add-in for MS-Excel. The code is written in Visual Basic for Application, embedded in the Microsoft Office package. This add-in is an easy to use tool for users with basic computer knowledge (and requirements for basic statistical analysis). Our implementation for Microsoft Excel 2000-2007 in Microsoft Windows 2000, XP, Vista and Windows 7 beta can handle files in different formats and converts them into other formats. It is a free software.

78 FR 65440 - Notice of Funds Availability (NOFA) Inviting Applications for the Native American CDFI Assistance...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... of multiple mandatory documents including: (1) a PDF fillable Applicant intake form; (2) a Microsoft Excel Workbook; (3) a Microsoft Word Narrative template; and (4) other mandatory attachments. (Applicants must use the Microsoft Word Narrative template the CDFI Fund provides; alternative templates...

Software For Design And Analysis Of Tanks And Cylindrical Shells

NASA Technical Reports Server (NTRS)

Luz, Paul L.; Graham, Jerry B.

1995-01-01

Skin-stringer Tank Analysis Spreadsheet System (STASS) computer program developed for use as preliminary design software tool that enables quick-turnaround design and analysis of structural domes and cylindrical barrel sections in propellant tanks or other cylindrical shells. Determines minimum required skin thicknesses for domes and cylindrical shells to withstand material failure due to applied pressures (ullage and/or hydrostatic) and runs buckling analyses on cylindrical shells and skin-stringers. Implemented as workbook program, using Microsoft Excel v4.0 on Macintosh II. Also implemented using Microsoft Excel v4.0 for Microsoft Windows v3.1 IBM PC.

Understanding the Degrees of Freedom of Sample Variance by Using Microsoft Excel

ERIC Educational Resources Information Center

Ding, Jian-Hua; Jin, Xian-Wen; Shuai, Ling-Ying

2017-01-01

In this article, the degrees of freedom of the sample variance are simulated by using the Visual Basic for Applications of Microsoft Excel 2010. The simulation file dynamically displays why the sample variance should be calculated by dividing the sum of squared deviations by n-1 rather than n, which is helpful for students to grasp the meaning of…

A Microsoft-Excel-based tool for running and critically appraising network meta-analyses--an overview and application of NetMetaXL.

PubMed

Brown, Stephen; Hutton, Brian; Clifford, Tammy; Coyle, Doug; Grima, Daniel; Wells, George; Cameron, Chris

2014-09-29

The use of network meta-analysis has increased dramatically in recent years. WinBUGS, a freely available Bayesian software package, has been the most widely used software package to conduct network meta-analyses. However, the learning curve for WinBUGS can be daunting, especially for new users. Furthermore, critical appraisal of network meta-analyses conducted in WinBUGS can be challenging given its limited data manipulation capabilities and the fact that generation of graphical output from network meta-analyses often relies on different software packages than the analyses themselves. We developed a freely available Microsoft-Excel-based tool called NetMetaXL, programmed in Visual Basic for Applications, which provides an interface for conducting a Bayesian network meta-analysis using WinBUGS from within Microsoft Excel. . This tool allows the user to easily prepare and enter data, set model assumptions, and run the network meta-analysis, with results being automatically displayed in an Excel spreadsheet. It also contains macros that use NetMetaXL's interface to generate evidence network diagrams, forest plots, league tables of pairwise comparisons, probability plots (rankograms), and inconsistency plots within Microsoft Excel. All figures generated are publication quality, thereby increasing the efficiency of knowledge transfer and manuscript preparation. We demonstrate the application of NetMetaXL using data from a network meta-analysis published previously which compares combined resynchronization and implantable defibrillator therapy in left ventricular dysfunction. We replicate results from the previous publication while demonstrating result summaries generated by the software. Use of the freely available NetMetaXL successfully demonstrated its ability to make running network meta-analyses more accessible to novice WinBUGS users by allowing analyses to be conducted entirely within Microsoft Excel. NetMetaXL also allows for more efficient and transparent critical appraisal of network meta-analyses, enhanced standardization of reporting, and integration with health economic evaluations which are frequently Excel-based.

A Microsoft-Excel-based tool for running and critically appraising network meta-analyses—an overview and application of NetMetaXL

PubMed Central

2014-01-01

Background The use of network meta-analysis has increased dramatically in recent years. WinBUGS, a freely available Bayesian software package, has been the most widely used software package to conduct network meta-analyses. However, the learning curve for WinBUGS can be daunting, especially for new users. Furthermore, critical appraisal of network meta-analyses conducted in WinBUGS can be challenging given its limited data manipulation capabilities and the fact that generation of graphical output from network meta-analyses often relies on different software packages than the analyses themselves. Methods We developed a freely available Microsoft-Excel-based tool called NetMetaXL, programmed in Visual Basic for Applications, which provides an interface for conducting a Bayesian network meta-analysis using WinBUGS from within Microsoft Excel. . This tool allows the user to easily prepare and enter data, set model assumptions, and run the network meta-analysis, with results being automatically displayed in an Excel spreadsheet. It also contains macros that use NetMetaXL’s interface to generate evidence network diagrams, forest plots, league tables of pairwise comparisons, probability plots (rankograms), and inconsistency plots within Microsoft Excel. All figures generated are publication quality, thereby increasing the efficiency of knowledge transfer and manuscript preparation. Results We demonstrate the application of NetMetaXL using data from a network meta-analysis published previously which compares combined resynchronization and implantable defibrillator therapy in left ventricular dysfunction. We replicate results from the previous publication while demonstrating result summaries generated by the software. Conclusions Use of the freely available NetMetaXL successfully demonstrated its ability to make running network meta-analyses more accessible to novice WinBUGS users by allowing analyses to be conducted entirely within Microsoft Excel. NetMetaXL also allows for more efficient and transparent critical appraisal of network meta-analyses, enhanced standardization of reporting, and integration with health economic evaluations which are frequently Excel-based. PMID:25267416

Physiologically based pharmacokinetic modeling using microsoft excel and visual basic for applications.

PubMed

Marino, Dale J

2005-01-01

Abstract Physiologically based pharmacokinetic (PBPK) models are mathematical descriptions depicting the relationship between external exposure and internal dose. These models have found great utility for interspecies extrapolation. However, specialized computer software packages, which are not widely distributed, have typically been used for model development and utilization. A few physiological models have been reported using more widely available software packages (e.g., Microsoft Excel), but these tend to include less complex processes and dose metrics. To ascertain the capability of Microsoft Excel and Visual Basis for Applications (VBA) for PBPK modeling, models for styrene, vinyl chloride, and methylene chloride were coded in Advanced Continuous Simulation Language (ACSL), Excel, and VBA, and simulation results were compared. For styrene, differences between ACSL and Excel or VBA compartment concentrations and rates of change were less than +/-7.5E-10 using the same numerical integration technique and time step. Differences using VBA fixed step or ACSL Gear's methods were generally <1.00E-03, although larger differences involving very small values were noted after exposure transitions. For vinyl chloride and methylene chloride, Excel and VBA PBPK model dose metrics differed by no more than -0.013% or -0.23%, respectively, from ACSL results. These differences are likely attributable to different step sizes rather than different numerical integration techniques. These results indicate that Microsoft Excel and VBA can be useful tools for utilizing PBPK models, and given the availability of these software programs, it is hoped that this effort will help facilitate the use and investigation of PBPK modeling.

A Microsoft® Excel Simulation Illustrating the Central Limit Theorem's Appropriateness for Comparing the Difference between the Means of Any Two Populations

ERIC Educational Resources Information Center

Moen, David H.; Powell, John E.

2008-01-01

Using Microsoft® Excel, several interactive, computerized learning modules are developed to illustrate the Central Limit Theorem's appropriateness for comparing the difference between the means of any two populations. These modules are used in the classroom to enhance the comprehension of this theorem as well as the concepts that provide the…

On the Least-Squares Fitting of Slater-Type Orbitals with Gaussians: Reproduction of the STO-NG Fits Using Microsoft Excel and Maple

ERIC Educational Resources Information Center

Pye, Cory C.; Mercer, Colin J.

2012-01-01

The symbolic algebra program Maple and the spreadsheet Microsoft Excel were used in an attempt to reproduce the Gaussian fits to a Slater-type orbital, required to construct the popular STO-NG basis sets. The successes and pitfalls encountered in such an approach are chronicled. (Contains 1 table and 3 figures.)

The concurrent validity and intrarater reliability of the Microsoft Kinect to measure thoracic kyphosis.

PubMed

Quek, June; Brauer, Sandra G; Treleaven, Julia; Clark, Ross A

2017-09-01

This study aims to investigate the concurrent validity and intrarater reliability of the Microsoft Kinect to measure thoracic kyphosis against the Flexicurve. Thirty-three healthy individuals (age: 31±11.0 years, men: 17, height: 170.2±8.2 cm, weight: 64.2±12.0 kg) participated, with 29 re-examined for intrarater reliability 1-7 days later. Thoracic kyphosis was measured using the Flexicurve and the Microsoft Kinect consecutively in both standing and sitting positions. Both the kyphosis index and angle were calculated. The Microsoft Kinect showed excellent concurrent validity (intraclass correlation coefficient=0.76-0.82) and reliability (intraclass correlation coefficient=0.81-0.98) for measuring thoracic kyphosis (angle and index) in both standing and sitting postures. This study is the first to show that the Microsoft Kinect has excellent validity and intrarater reliability to measure thoracic kyphosis, which is promising for its use in the clinical setting.

Excel for Cost Engineers

NASA Technical Reports Server (NTRS)

Butts, Glenn C.

2007-01-01

Excel is a powerful tool with a plethora of largely unused capabilities that can make the life of an engineer cognizant of them a great deal easier. This paper offers tips, tricks and techniques for better worksheets. Including the use of data validation, conditional formatting, subtotals, text formulas, custom functions and much more. It is assumed that the reader will have a cursory understanding of Excel so the basics will not be covered, if you get hung up try Excel's built in help menus, or a good book.

Confirmatory factor analysis using Microsoft Excel.

PubMed

Miles, Jeremy N V

2005-11-01

This article presents a method for using Microsoft (MS) Excel for confirmatory factor analysis (CFA). CFA is often seen as an impenetrable technique, and thus, when it is taught, there is frequently little explanation of the mechanisms or underlying calculations. The aim of this article is to demonstrate that this is not the case; it is relatively straightforward to produce a spreadsheet in MS Excel that can carry out simple CFA. It is possible, with few or no programming skills, to effectively program a CFA analysis and, thus, to gain insight into the workings of the procedure.

Recurrence Interval and Event Age Data for Type A Faults

USGS Publications Warehouse

Dawson, Timothy E.; Weldon, Ray J.; Biasi, Glenn P.

2008-01-01

This appendix summarizes available recurrence interval, event age, and timing of most recent event data for Type A faults considered in the Earthquake Rate Model 2 (ERM 2) and used in the ERM 2 Appendix C analysis as well as Appendix N (time-dependent probabilities). These data have been compiled into an Excel workbook named Appendix B A-fault event ages_recurrence_V5.0 (herein referred to as the Appendix B workbook). For convenience, the Appendix B workbook is attached to the end of this document as a series of tables. The tables within the Appendix B workbook include site locations, event ages, and recurrence data, and in some cases, the interval of time between earthquakes is also reported. The Appendix B workbook is organized as individual worksheets, with each worksheet named by fault and paleoseismic site. Each worksheet contains the site location in latitude and longitude, as well as information on event ages, and a summary of recurrence data. Because the data has been compiled from different sources with different presentation styles, descriptions of the contents of each worksheet within the Appendix B spreadsheet are summarized.

Human Factors Feedback: Brain Acoustic Monitor

DTIC Science & Technology

2012-02-01

Microsoft Office Excel .................................................................12  iv 4.  Conclusions 13  5.  References 15  Appendix A...Panasonic Toughbook system. †Toughbook is registered trademark of Panasonic Corporation. ‡Windows is a registered trademark of Microsoft Corporation. 4...was preloaded with Microsoft Windows XP service pack 2 OS. This OS is widely used on IBM-style personal computers, and the BAM system did not

Microsoft excel spreadsheets for calculation of P-V-T relations and thermodynamic properties from equations of state of MgO, diamond and nine metals as pressure markers in high-pressure and high-temperature experiments

NASA Astrophysics Data System (ADS)

Sokolova, Tatiana S.; Dorogokupets, Peter I.; Dymshits, Anna M.; Danilov, Boris S.; Litasov, Konstantin D.

2016-09-01

We present Microsoft Excel spreadsheets for calculation of thermodynamic functions and P-V-T properties of MgO, diamond and 9 metals, Al, Cu, Ag, Au, Pt, Nb, Ta, Mo, and W, depending on temperature and volume or temperature and pressure. The spreadsheets include the most common pressure markers used in in situ experiments with diamond anvil cell and multianvil techniques. The calculations are based on the equation of state formalism via the Helmholtz free energy. The program was developed using Visual Basic for Applications in Microsoft Excel and is a time-efficient tool to evaluate volume, pressure and other thermodynamic functions using T-P and T-V data only as input parameters. This application is aimed to solve practical issues of high pressure experiments in geosciences and mineral physics.

imDEV: a graphical user interface to R multivariate analysis tools in Microsoft Excel.

PubMed

Grapov, Dmitry; Newman, John W

2012-09-01

Interactive modules for Data Exploration and Visualization (imDEV) is a Microsoft Excel spreadsheet embedded application providing an integrated environment for the analysis of omics data through a user-friendly interface. Individual modules enables interactive and dynamic analyses of large data by interfacing R's multivariate statistics and highly customizable visualizations with the spreadsheet environment, aiding robust inferences and generating information-rich data visualizations. This tool provides access to multiple comparisons with false discovery correction, hierarchical clustering, principal and independent component analyses, partial least squares regression and discriminant analysis, through an intuitive interface for creating high-quality two- and a three-dimensional visualizations including scatter plot matrices, distribution plots, dendrograms, heat maps, biplots, trellis biplots and correlation networks. Freely available for download at http://sourceforge.net/projects/imdev/. Implemented in R and VBA and supported by Microsoft Excel (2003, 2007 and 2010).

A Microsoft Excel® 2010 Based Tool for Calculating Interobserver Agreement

PubMed Central

Azulay, Richard L

2011-01-01

This technical report provides detailed information on the rationale for using a common computer spreadsheet program (Microsoft Excel®) to calculate various forms of interobserver agreement for both continuous and discontinuous data sets. In addition, we provide a brief tutorial on how to use an Excel spreadsheet to automatically compute traditional total count, partial agreement-within-intervals, exact agreement, trial-by-trial, interval-by-interval, scored-interval, unscored-interval, total duration, and mean duration-per-interval interobserver agreement algorithms. We conclude with a discussion of how practitioners may integrate this tool into their clinical work. PMID:22649578

A microsoft excel(®) 2010 based tool for calculating interobserver agreement.

PubMed

Reed, Derek D; Azulay, Richard L

2011-01-01

This technical report provides detailed information on the rationale for using a common computer spreadsheet program (Microsoft Excel(®)) to calculate various forms of interobserver agreement for both continuous and discontinuous data sets. In addition, we provide a brief tutorial on how to use an Excel spreadsheet to automatically compute traditional total count, partial agreement-within-intervals, exact agreement, trial-by-trial, interval-by-interval, scored-interval, unscored-interval, total duration, and mean duration-per-interval interobserver agreement algorithms. We conclude with a discussion of how practitioners may integrate this tool into their clinical work.

76 FR 42164 - Announcement of Competition Under the America COMPETES Reauthorization Act of 2011

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-18

... listing will be in a format completely compatible with Microsoft Excel 2007 and contain the information... by VA. The narrative will be in a format completely compatible with Microsoft Word 2007, not...

Basic statistics with Microsoft Excel: a review.

PubMed

Divisi, Duilio; Di Leonardo, Gabriella; Zaccagna, Gino; Crisci, Roberto

2017-06-01

The scientific world is enriched daily with new knowledge, due to new technologies and continuous discoveries. The mathematical functions explain the statistical concepts particularly those of mean, median and mode along with those of frequency and frequency distribution associated to histograms and graphical representations, determining elaborative processes on the basis of the spreadsheet operations. The aim of the study is to highlight the mathematical basis of statistical models that regulate the operation of spreadsheets in Microsoft Excel.

Basic statistics with Microsoft Excel: a review

PubMed Central

Di Leonardo, Gabriella; Zaccagna, Gino; Crisci, Roberto

2017-01-01

The scientific world is enriched daily with new knowledge, due to new technologies and continuous discoveries. The mathematical functions explain the statistical concepts particularly those of mean, median and mode along with those of frequency and frequency distribution associated to histograms and graphical representations, determining elaborative processes on the basis of the spreadsheet operations. The aim of the study is to highlight the mathematical basis of statistical models that regulate the operation of spreadsheets in Microsoft Excel. PMID:28740690

78 FR 4812 - Endangered and Threatened Wildlife and Plants; Removal of the Valley Elderberry Longhorn Beetle...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-23

... a separate document, our preferred file format is Microsoft Word. If you attach multiple comments (such as form letters), our preferred format is a Microsoft Excel spreadsheet. (2) By Hard Copy: Submit...

Validity of "Hi_Science" as instructional media based-android refer to experiential learning model

NASA Astrophysics Data System (ADS)

Qamariah, Jumadi, Senam, Wilujeng, Insih

2017-08-01

Hi_Science is instructional media based-android in learning science on material environmental pollution and global warming. This study is aimed: (a) to show the display of Hi_Science that will be applied in Junior High School, and (b) to describe the validity of Hi_Science. Hi_Science as instructional media created with colaboration of innovative learning model and development of technology at the current time. Learning media selected is based-android and collaborated with experiential learning model as an innovative learning model. Hi_Science had adapted student worksheet by Taufiq (2015). Student worksheet had very good category by two expert lecturers and two science teachers (Taufik, 2015). This student worksheet is refined and redeveloped in android as an instructional media which can be used by students for learning science not only in the classroom, but also at home. Therefore, student worksheet which has become instructional media based-android must be validated again. Hi_Science has been validated by two experts. The validation is based on assessment of meterials aspects and media aspects. The data collection was done by media assessment instrument. The result showed the assessment of material aspects has obtained the average value 4,72 with percentage of agreement 96,47%, that means Hi_Science on the material aspects is in excellent category or very valid category. The assessment of media aspects has obtained the average value 4,53 with percentage of agreement 98,70%, that means Hi_Science on the media aspects is in excellent category or very valid category. It was concluded that Hi_Science as instructional media can be applied in the junior high school.

GLobal Integrated Design Environment

NASA Technical Reports Server (NTRS)

Kunkel, Matthew; McGuire, Melissa; Smith, David A.; Gefert, Leon P.

2011-01-01

The GLobal Integrated Design Environment (GLIDE) is a collaborative engineering application built to resolve the design session issues of real-time passing of data between multiple discipline experts in a collaborative environment. Utilizing Web protocols and multiple programming languages, GLIDE allows engineers to use the applications to which they are accustomed in this case, Excel to send and receive datasets via the Internet to a database-driven Web server. Traditionally, a collaborative design session consists of one or more engineers representing each discipline meeting together in a single location. The discipline leads exchange parameters and iterate through their respective processes to converge on an acceptable dataset. In cases in which the engineers are unable to meet, their parameters are passed via e-mail, telephone, facsimile, or even postal mail. The result of this slow process of data exchange would elongate a design session to weeks or even months. While the iterative process remains in place, software can now exchange parameters securely and efficiently, while at the same time allowing for much more information about a design session to be made available. GLIDE is written in a compilation of several programming languages, including REALbasic, PHP, and Microsoft Visual Basic. GLIDE client installers are available to download for both Microsoft Windows and Macintosh systems. The GLIDE client software is compatible with Microsoft Excel 2000 or later on Windows systems, and with Microsoft Excel X or later on Macintosh systems. GLIDE follows the Client-Server paradigm, transferring encrypted and compressed data via standard Web protocols. Currently, the engineers use Excel as a front end to the GLIDE Client, as many of their custom tools run in Excel.

Spending Smart: How To Budget and Finance. Making Sense of Your Budget Dollars; Success with Budget Proposals; Encumbering Grants: Managing the Money; Write a Grant? Me?; Using Microsoft[R] Excel To Plan and Budget in Your School Library; Charging Ahead; The No-Money Lottery; Coffee, Anyone?

ERIC Educational Resources Information Center

Bernstein, Allison; Baule, Steve; Farmer, Lesley S. J.; Anderson, Cyndee; Barringer, Crystal; Buchanan, Peggy; Fullner, Sheryl Kindle; Knop, Kathi; Larson, Chris

2002-01-01

Includes eight articles that address issues related to budgeting and finances in secondary school libraries. Topics include limited budgets; budget proposals; administering grants; writing grants; using Microsoft's Excel software for budgeting; using credit cards for library purchases; offering prizes for donating books; and offering coffee and…

Preparing data for analysis using microsoft Excel.

PubMed

Elliott, Alan C; Hynan, Linda S; Reisch, Joan S; Smith, Janet P

2006-09-01

A critical component essential to good research is the accurate and efficient collection and preparation of data for analysis. Most medical researchers have little or no training in data management, often causing not only excessive time spent cleaning data but also a risk that the data set contains collection or recording errors. The implementation of simple guidelines based on techniques used by professional data management teams will save researchers time and money and result in a data set better suited to answer research questions. Because Microsoft Excel is often used by researchers to collect data, specific techniques that can be implemented in Excel are presented.

Resampling methods in Microsoft Excel® for estimating reference intervals

PubMed Central

Theodorsson, Elvar

2015-01-01

Computer- intensive resampling/bootstrap methods are feasible when calculating reference intervals from non-Gaussian or small reference samples. Microsoft Excel® in version 2010 or later includes natural functions, which lend themselves well to this purpose including recommended interpolation procedures for estimating 2.5 and 97.5 percentiles.
The purpose of this paper is to introduce the reader to resampling estimation techniques in general and in using Microsoft Excel® 2010 for the purpose of estimating reference intervals in particular.
Parametric methods are preferable to resampling methods when the distributions of observations in the reference samples is Gaussian or can transformed to that distribution even when the number of reference samples is less than 120. Resampling methods are appropriate when the distribution of data from the reference samples is non-Gaussian and in case the number of reference individuals and corresponding samples are in the order of 40. At least 500-1000 random samples with replacement should be taken from the results of measurement of the reference samples. PMID:26527366

Resampling methods in Microsoft Excel® for estimating reference intervals.

PubMed

Theodorsson, Elvar

2015-01-01

Computer-intensive resampling/bootstrap methods are feasible when calculating reference intervals from non-Gaussian or small reference samples. Microsoft Excel® in version 2010 or later includes natural functions, which lend themselves well to this purpose including recommended interpolation procedures for estimating 2.5 and 97.5 percentiles. 
The purpose of this paper is to introduce the reader to resampling estimation techniques in general and in using Microsoft Excel® 2010 for the purpose of estimating reference intervals in particular.
 Parametric methods are preferable to resampling methods when the distributions of observations in the reference samples is Gaussian or can transformed to that distribution even when the number of reference samples is less than 120. Resampling methods are appropriate when the distribution of data from the reference samples is non-Gaussian and in case the number of reference individuals and corresponding samples are in the order of 40. At least 500-1000 random samples with replacement should be taken from the results of measurement of the reference samples.

imDEV: a graphical user interface to R multivariate analysis tools in Microsoft Excel

PubMed Central

Grapov, Dmitry; Newman, John W.

2012-01-01

Summary: Interactive modules for Data Exploration and Visualization (imDEV) is a Microsoft Excel spreadsheet embedded application providing an integrated environment for the analysis of omics data through a user-friendly interface. Individual modules enables interactive and dynamic analyses of large data by interfacing R's multivariate statistics and highly customizable visualizations with the spreadsheet environment, aiding robust inferences and generating information-rich data visualizations. This tool provides access to multiple comparisons with false discovery correction, hierarchical clustering, principal and independent component analyses, partial least squares regression and discriminant analysis, through an intuitive interface for creating high-quality two- and a three-dimensional visualizations including scatter plot matrices, distribution plots, dendrograms, heat maps, biplots, trellis biplots and correlation networks. Availability and implementation: Freely available for download at http://sourceforge.net/projects/imdev/. Implemented in R and VBA and supported by Microsoft Excel (2003, 2007 and 2010). Contact: John.Newman@ars.usda.gov Supplementary Information: Installation instructions, tutorials and users manual are available at http://sourceforge.net/projects/imdev/. PMID:22815358

A Spreadsheet for the Mixing of a Row of Jets with a Confined Crossflow

NASA Technical Reports Server (NTRS)

Holderman, J. D.; Smith, T. D.; Clisset, J. R.; Lear, W. E.

2005-01-01

An interactive computer code, written with a readily available software program, Microsoft Excel (Microsoft Corporation, Redmond, WA) is presented which displays 3 D oblique plots of a conserved scalar distribution downstream of jets mixing with a confined crossflow, for a single row, double rows, or opposed rows of jets with or without flow area convergence and/or a non-uniform crossflow scalar distribution. This project used a previously developed empirical model of jets mixing in a confined crossflow to create an Microsoft Excel spreadsheet that can output the profiles of a conserved scalar for jets injected into a confined crossflow given several input variables. The program uses multiple spreadsheets in a single Microsoft Excel notebook to carry out the modeling. The first sheet contains the main program, controls for the type of problem to be solved, and convergence criteria. The first sheet also provides for input of the specific geometry and flow conditions. The second sheet presents the results calculated with this routine to show the effects on the mixing of varying flow and geometric parameters. Comparisons are also made between results from the version of the empirical correlations implemented in the spreadsheet and the versions originally written in Applesoft BASIC (Apple Computer, Cupertino, CA) in the 1980's.

A Spreadsheet for the Mixing of a Row of Jets with a Confined Crossflow. Supplement

NASA Technical Reports Server (NTRS)

Holderman, J. D.; Smith, T. D.; Clisset, J. R.; Lear, W. E.

2005-01-01

An interactive computer code, written with a readily available software program, Microsoft Excel (Microsoft Corporation, Redmond, WA) is presented which displays 3 D oblique plots of a conserved scalar distribution downstream of jets mixing with a confined crossflow, for a single row, double rows, or opposed rows of jets with or without flow area convergence and/or a non-uniform crossflow scalar distribution. This project used a previously developed empirical model of jets mixing in a confined crossflow to create an Microsoft Excel spreadsheet that can output the profiles of a conserved scalar for jets injected into a confined crossflow given several input variables. The program uses multiple spreadsheets in a single Microsoft Excel notebook to carry out the modeling. The first sheet contains the main program, controls for the type of problem to be solved, and convergence criteria. The first sheet also provides for input of the specific geometry and flow conditions. The second sheet presents the results calculated with this routine to show the effects on the mixing of varying flow and geometric parameters. Comparisons are also made between results from the version of the empirical correlations implemented in the spreadsheet and the versions originally written in Applesoft BASIC (Apple Computer, Cupertino, CA) in the 1980's.

78 FR 58507 - Endangered and Threatened Wildlife and Plants; 90-Day Finding on a Petition To List 10 Sturgeon...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-24

... Microsoft Excel. By Hard Copy: U.S. mail or hand-delivery: Public Comments Processing, Attn: FWS-HQ-ES-2013... procedures. If you attach your comments as a separate document, our preferred file format is Microsoft Word...

Visual Communication: Integrating Visual Instruction into Business Communication Courses

ERIC Educational Resources Information Center

Baker, William H.

2006-01-01

Business communication courses are ideal for teaching visual communication principles and techniques. Many assignments lend themselves to graphic enrichment, such as flyers, handouts, slide shows, Web sites, and newsletters. Microsoft Publisher and Microsoft PowerPoint are excellent tools for these assignments, with Publisher being best for…

System Advisor Model, SAM 2014.1.14: General Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blair, Nate; Dobos, Aron P.; Freeman, Janine

2014-02-01

This document describes the capabilities of the U.S. Department of Energy and National Renewable Energy Laboratory's System Advisor Model (SAM), Version 2013.9.20, released on September 9, 2013. SAM is a computer model that calculates performance and financial metrics of renewable energy systems. Project developers, policy makers, equipment manufacturers, and researchers use graphs and tables of SAM results in the process of evaluating financial, technology, and incentive options for renewable energy projects. SAM simulates the performance of photovoltaic, concentrating solar power, solar water heating, wind, geothermal, biomass, and conventional power systems. The financial model can represent financial structures for projects thatmore » either buy and sell electricity at retail rates (residential and commercial) or sell electricity at a price determined in a power purchase agreement (utility). SAM's advanced simulation options facilitate parametric and sensitivity analyses, and statistical analysis capabilities are available for Monte Carlo simulation and weather variability (P50/P90) studies. SAM can also read input variables from Microsoft Excel worksheets. For software developers, the SAM software development kit (SDK) makes it possible to use SAM simulation modules in their applications written in C/C++, C#, Java, Python, and MATLAB. NREL provides both SAM and the SDK as free downloads at http://sam.nrel.gov. Technical support and more information about the software are available on the website.« less

Customising Microsoft Office to Develop a Tutorial Learning Environment

ERIC Educational Resources Information Center

Deacon, Andrew; Jaftha, Jacob; Horwitz, David

2004-01-01

Powerful applications such as Microsoft Office's Excel and Word are widely used to perform common tasks in the workplace and in education. Scripting within these applications allows unanticipated user requirements to be addressed. We show that such extensibility, intended to support office automation-type applications, is well suited to the…

Cryptanalysis on classical cipher based on Indonesian language

NASA Astrophysics Data System (ADS)

Marwati, R.; Yulianti, K.

2018-05-01

Cryptanalysis is a process of breaking a cipher in an illegal decryption. This paper discusses about encryption some classic cryptography, breaking substitution cipher and stream cipher, and increasing its security. Encryption and ciphering based on Indonesian Language text. Microsoft Word and Microsoft Excel were chosen as ciphering and breaking tools.

Generating variable and random schedules of reinforcement using Microsoft Excel macros.

PubMed

Bancroft, Stacie L; Bourret, Jason C

2008-01-01

Variable reinforcement schedules are used to arrange the availability of reinforcement following varying response ratios or intervals of time. Random reinforcement schedules are subtypes of variable reinforcement schedules that can be used to arrange the availability of reinforcement at a constant probability across number of responses or time. Generating schedule values for variable and random reinforcement schedules can be difficult. The present article describes the steps necessary to write macros in Microsoft Excel that will generate variable-ratio, variable-interval, variable-time, random-ratio, random-interval, and random-time reinforcement schedule values.

Inserting Phase Change Lines into Microsoft Excel® Graphs.

PubMed

Dubuque, Erick M

2015-10-01

Microsoft Excel® is a popular graphing tool used by behavior analysts to visually display data. However, this program is not always friendly to the graphing conventions used by behavior analysts. For example, adding phase change lines has typically been a cumbersome process involving the insertion of line objects that do not move when new data is added to a graph. The purpose of this article is to describe a novel way to add phase change lines that move when new data is added and when graphs are resized.

LICSS - a chemical spreadsheet in microsoft excel

PubMed Central

2012-01-01

Background Representations of chemical datasets in spreadsheet format are important for ready data assimilation and manipulation. In addition to the normal spreadsheet facilities, chemical spreadsheets need to have visualisable chemical structures and data searchable by chemical as well as textual queries. Many such chemical spreadsheet tools are available, some operating in the familiar Microsoft Excel environment. However, within this group, the performance of Excel is often compromised, particularly in terms of the number of compounds which can usefully be stored on a sheet. Summary LICSS is a lightweight chemical spreadsheet within Microsoft Excel for Windows. LICSS stores structures solely as Smiles strings. Chemical operations are carried out by calling Java code modules which use the CDK, JChemPaint and OPSIN libraries to provide cheminformatics functionality. Compounds in sheets or charts may be visualised (individually or en masse), and sheets may be searched by substructure or similarity. All the molecular descriptors available in CDK may be calculated for compounds (in batch or on-the-fly), and various cheminformatic operations such as fingerprint calculation, Sammon mapping, clustering and R group table creation may be carried out. We detail here the features of LICSS and how they are implemented. We also explain the design criteria, particularly in terms of potential corporate use, which led to this particular implementation. Conclusions LICSS is an Excel-based chemical spreadsheet with a difference: • It can usefully be used on sheets containing hundreds of thousands of compounds; it doesn't compromise the normal performance of Microsoft Excel • It is designed to be installed and run in environments in which users do not have admin privileges; installation involves merely file copying, and sharing of LICSS sheets invokes automatic installation • It is free and extensible LICSS is open source software and we hope sufficient detail is provided here to enable developers to add their own features and share with the community. PMID:22301088

Applying innovative approach “Nature of Science (NoS) within inquiry” for developing scientific literacy in the student worksheet

NASA Astrophysics Data System (ADS)

Widowati, A.; Anjarsari, P.; Zuhdan, K. P.; Dita, A.

2018-03-01

The challenges of the 21st century require innovative solutions. Education must able to make an understanding of science learning that leads to the formation of scientific literacy learners. This research was conducted to produce the prototype as science worksheet based on Nature of Science (NoS) within inquiry approach and to know the effectiveness its product for developing scientific literacy. This research was the development and research design, by pointing to Four D models and Borg & Gall Model. There were 4 main phases (define, design, develop, disseminate) and additional phases (preliminary field testing, main product revision, main field testing, and operational product revision). Research subjects were students of the junior high school in Yogyakarta. The instruments used included questionnaire sheet product validation and scientific literacy test. For the validation data were analyzed descriptively. The test result was analyzed by an N-gain score. The results showed that the appropriateness of worksheet applying NoS within inquiry-based learning approach is eligible based on the assessment from excellent by experts and teachers, students’ scientific literacy can improve high category of the N-gain score at 0.71 by using student worksheet with Nature of Science (NoS) within inquiry approach.

ARS-Media for Excel

USDA-ARS?s Scientific Manuscript database

ARS-Media for Excel is an ion solution calculator that uses Microsoft Excel to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Thus, the recipes are genera...

How Statistics "Excel" Online.

ERIC Educational Resources Information Center

Chao, Faith; Davis, James

2000-01-01

Discusses the use of Microsoft Excel software and provides examples of its use in an online statistics course at Golden Gate University in the areas of randomness and probability, sampling distributions, confidence intervals, and regression analysis. (LRW)

77 FR 53164 - Magnuson-Stevens Fishery Conservation and Management Act Provisions; Fisheries of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-31

... Microsoft Word, Microsoft Excel, WordPerfect, or Adobe PDF file formats only. FOR FURTHER INFORMATION...). The closure was implemented based on advice from the U.S. Food and Drug Administration (FDA) after... Management Plan (FMP). Since the implementation of the closure, NOAA's National Ocean Service has provided...

14 CFR 302.603 - Contents of complaint or request for determination.

Code of Federal Regulations, 2010 CFR

2010-01-01

... determination. 302.603 Section 302.603 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF...: Microsoft Word (or RTF), Word Perfect, Ami Pro, Microsoft Excel, Lotus 123, Quattro Pro, or ASCII tab...: one copy for the docket, one copy for the Office of Hearings, and one copy for the Office of Aviation...

Using Microsoft Excel to compute the 5% overall site X/Q value and the 95th percentile of the distribution of doses to the nearest maximally exposed offsite individual (MEOI).

PubMed

Vickers, Linda D

2010-05-01

This paper describes the method using Microsoft Excel (Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399) to compute the 5% overall site X/Q value and the 95th percentile of the distribution of doses to the nearest maximally exposed offsite individual (MEOI) in accordance with guidance from DOE-STD-3009-1994 and U.S. NRC Regulatory Guide 1.145-1982. The accurate determination of the 5% overall site X/Q value is the most important factor in the computation of the 95th percentile of the distribution of doses to the nearest MEOI. This method should be used to validate software codes that compute the X/Q. The 95th percentile of the distribution of doses to the nearest MEOI must be compared to the U.S. DOE Evaluation Guide of 25 rem to determine the relative severity of hazard to the public from a postulated, unmitigated design basis accident that involves an offsite release of radioactive material.

Enhancing Teaching using MATLAB Add-Ins for Excel

ERIC Educational Resources Information Center

Hamilton, Paul V.

2004-01-01

In this paper I will illustrate how to extend the capabilities of Microsoft Excel spreadsheets with add-ins created by MATLAB. Excel provides a broad array of fundamental tools but often comes up short when more sophisticated scenarios are involved. To overcome this short-coming of Excel while retaining its ease of use, I will describe how…

Generating Variable and Random Schedules of Reinforcement Using Microsoft Excel Macros

PubMed Central

Bancroft, Stacie L; Bourret, Jason C

2008-01-01

Variable reinforcement schedules are used to arrange the availability of reinforcement following varying response ratios or intervals of time. Random reinforcement schedules are subtypes of variable reinforcement schedules that can be used to arrange the availability of reinforcement at a constant probability across number of responses or time. Generating schedule values for variable and random reinforcement schedules can be difficult. The present article describes the steps necessary to write macros in Microsoft Excel that will generate variable-ratio, variable-interval, variable-time, random-ratio, random-interval, and random-time reinforcement schedule values. PMID:18595286

Chromatographic peak resolution using Microsoft Excel Solver. The merit of time shifting input arrays.

PubMed

Dasgupta, Purnendu K

2008-12-05

Resolution of overlapped chromatographic peaks is generally accomplished by modeling the peaks as Gaussian or modified Gaussian functions. It is possible, even preferable, to use actual single analyte input responses for this purpose and a nonlinear least squares minimization routine such as that provided by Microsoft Excel Solver can then provide the resolution. In practice, the quality of the results obtained varies greatly due to small shifts in retention time. I show here that such deconvolution can be considerably improved if one or more of the response arrays are iteratively shifted in time.

Emissions & Generation Resource Integrated Database (eGRID), eGRID2010

EPA Pesticide Factsheets

The Emissions & Generation Resource Integrated Database (eGRID) is a comprehensive source of data on the environmental characteristics of almost all electric power generated in the United States. These environmental characteristics include air emissions for nitrogen oxides, sulfur dioxide, carbon dioxide, methane, and nitrous oxide; emissions rates; net generation; resource mix; and many other attributes.eGRID2010 contains the complete release of year 2007 data, as well as years 2005 and 2004 data. Excel spreadsheets, full documentation, summary data, eGRID subregion and NERC region representational maps, and GHG emission factors are included in this data set. The Archived data in eGRID2002 contain years 1996 through 2000 data.For year 2007 data, the first Microsoft Excel workbook, Plant, contains boiler, generator, and plant spreadsheets. The second Microsoft Excel workbook, Aggregation, contains aggregated data by state, electric generating company, parent company, power control area, eGRID subregion, NERC region, and U.S. total levels. The third Microsoft Excel workbook, ImportExport, contains state import-export data, as well as U.S. generation and consumption data for years 2007, 2005, and 2004. For eGRID data for years 2005 and 2004, a user friendly web application, eGRIDweb, is available to select, view, print, and export specified data.

WASP (Write a Scientific Paper) using Excel - 13: Correlation and Regression.

PubMed

Grech, Victor

2018-07-01

Correlation and regression measure the closeness of association between two continuous variables. This paper explains how to perform these tests in Microsoft Excel and their interpretation, as well as how to apply these tests dynamically using Excel's functions. Copyright © 2018 Elsevier B.V. All rights reserved.

Analysis of Variance with Summary Statistics in Microsoft® Excel®

ERIC Educational Resources Information Center

Larson, David A.; Hsu, Ko-Cheng

2010-01-01

Students regularly are asked to solve Single Factor Analysis of Variance problems given only the sample summary statistics (number of observations per category, category means, and corresponding category standard deviations). Most undergraduate students today use Excel for data analysis of this type. However, Excel, like all other statistical…

Getting the Best out of Excel

ERIC Educational Resources Information Center

Heys, Chris

2008-01-01

Excel, Microsoft's spreadsheet program, offers several tools which have proven useful in solving some optimization problems that arise in operations research. We will look at two such tools, the Excel modules called Solver and Goal Seek--this after deriving an equation, called the "cash accumulation equation", to be used in conjunction with them.

A Realistic Data Warehouse Project: An Integration of Microsoft Access[R] and Microsoft Excel[R] Advanced Features and Skills

ERIC Educational Resources Information Center

King, Michael A.

2009-01-01

Business intelligence derived from data warehousing and data mining has become one of the most strategic management tools today, providing organizations with long-term competitive advantages. Business school curriculums and popular database textbooks cover data warehousing, but the examples and problem sets typically are small and unrealistic. The…

Using Microsoft Excel to teach statistics in a graduate advanced practice nursing program.

PubMed

DiMaria-Ghalili, Rose Ann; Ostrow, C Lynne

2009-02-01

This article describes the authors' experiences during 3 years of using Microsoft Excel to teach graduate-level statistics, as part of the research core required by the American Association of Colleges of Nursing for all professional graduate nursing programs. The advantages to using this program instead of specialized statistical programs are ease of accessibility, increased transferability of skills, and reduced cost for students. The authors share their insight about realistic goals for teaching statistics to master's-level students and the resources that are available to faculty to help them to learn and use Excel in their courses. Several online sites that are excellent resources for both faculty and students are discussed. Detailed attention is given to an online course (Carnegie-Mellon University Open Learning Initiative, n.d.), which the authors have incorporated into their graduate-level research methods course.

LICSS - a chemical spreadsheet in microsoft excel.

PubMed

Lawson, Kevin R; Lawson, Jonty

2012-02-02

Representations of chemical datasets in spreadsheet format are important for ready data assimilation and manipulation. In addition to the normal spreadsheet facilities, chemical spreadsheets need to have visualisable chemical structures and data searchable by chemical as well as textual queries. Many such chemical spreadsheet tools are available, some operating in the familiar Microsoft Excel environment. However, within this group, the performance of Excel is often compromised, particularly in terms of the number of compounds which can usefully be stored on a sheet. LICSS is a lightweight chemical spreadsheet within Microsoft Excel for Windows. LICSS stores structures solely as Smiles strings. Chemical operations are carried out by calling Java code modules which use the CDK, JChemPaint and OPSIN libraries to provide cheminformatics functionality. Compounds in sheets or charts may be visualised (individually or en masse), and sheets may be searched by substructure or similarity. All the molecular descriptors available in CDK may be calculated for compounds (in batch or on-the-fly), and various cheminformatic operations such as fingerprint calculation, Sammon mapping, clustering and R group table creation may be carried out.We detail here the features of LICSS and how they are implemented. We also explain the design criteria, particularly in terms of potential corporate use, which led to this particular implementation. LICSS is an Excel-based chemical spreadsheet with a difference:• It can usefully be used on sheets containing hundreds of thousands of compounds; it doesn't compromise the normal performance of Microsoft Excel• It is designed to be installed and run in environments in which users do not have admin privileges; installation involves merely file copying, and sharing of LICSS sheets invokes automatic installation• It is free and extensibleLICSS is open source software and we hope sufficient detail is provided here to enable developers to add their own features and share with the community.

Improving the Teaching of Microsoft Excel: Traditional Book versus Online Platform

ERIC Educational Resources Information Center

Brooks, Stoney; Taylor, Joseph

2016-01-01

The authors explore the differences between traditional, book-based methods of teaching Excel and online, platform-supported methods by comparing teaching students in different locations, with and without online support. As Excel is a critical skill for business majors, the authors investigate which methods and locations provide the highest…

GenAlEx 6.5: genetic analysis in Excel. Population genetic software for teaching and research--an update.

PubMed

Peakall, Rod; Smouse, Peter E

2012-10-01

GenAlEx: Genetic Analysis in Excel is a cross-platform package for population genetic analyses that runs within Microsoft Excel. GenAlEx offers analysis of diploid codominant, haploid and binary genetic loci and DNA sequences. Both frequency-based (F-statistics, heterozygosity, HWE, population assignment, relatedness) and distance-based (AMOVA, PCoA, Mantel tests, multivariate spatial autocorrelation) analyses are provided. New features include calculation of new estimators of population structure: G'(ST), G''(ST), Jost's D(est) and F'(ST) through AMOVA, Shannon Information analysis, linkage disequilibrium analysis for biallelic data and novel heterogeneity tests for spatial autocorrelation analysis. Export to more than 30 other data formats is provided. Teaching tutorials and expanded step-by-step output options are included. The comprehensive guide has been fully revised. GenAlEx is written in VBA and provided as a Microsoft Excel Add-in (compatible with Excel 2003, 2007, 2010 on PC; Excel 2004, 2011 on Macintosh). GenAlEx, and supporting documentation and tutorials are freely available at: http://biology.anu.edu.au/GenAlEx. rod.peakall@anu.edu.au.

Random Vibrations

NASA Technical Reports Server (NTRS)

Messaro. Semma; Harrison, Phillip

2010-01-01

Ares I Zonal Random vibration environments due to acoustic impingement and combustion processes are develop for liftoff, ascent and reentry. Random Vibration test criteria for Ares I Upper Stage pyrotechnic components are developed by enveloping the applicable zonal environments where each component is located. Random vibration tests will be conducted to assure that these components will survive and function appropriately after exposure to the expected vibration environments. Methodology: Random Vibration test criteria for Ares I Upper Stage pyrotechnic components were desired that would envelope all the applicable environments where each component was located. Applicable Ares I Vehicle drawings and design information needed to be assessed to determine the location(s) for each component on the Ares I Upper Stage. Design and test criteria needed to be developed by plotting and enveloping the applicable environments using Microsoft Excel Spreadsheet Software and documenting them in a report Using Microsoft Word Processing Software. Conclusion: Random vibration liftoff, ascent, and green run design & test criteria for the Upper Stage Pyrotechnic Components were developed by using Microsoft Excel to envelope zonal environments applicable to each component. Results were transferred from Excel into a report using Microsoft Word. After the report is reviewed and edited by my mentor it will be submitted for publication as an attachment to a memorandum. Pyrotechnic component designers will extract criteria from my report for incorporation into the design and test specifications for components. Eventually the hardware will be tested to the environments I developed to assure that the components will survive and function appropriately after exposure to the expected vibration environments.

Excellence in Teaching Mathematics: Activities and Ideas from Ohio's Outstanding Teachers, 1994 District Winners.

ERIC Educational Resources Information Center

Borchers, Nancy, Ed.; Caniglia, Joanne, Ed.

This document is a collection of lesson plans written by 18 of Ohio's outstanding teachers chosen by the Ohio Council of Teachers of Mathematics. Each lesson plan includes reflection questions and some contain worksheets. Lesson plan titles for primary grades (grades 1-3) are: "Munching Fractions;""Math and…

A Computer-Based Simulation for Teaching Heat Transfer across a Woody Stem

ERIC Educational Resources Information Center

Maixner, Michael R.; Noyd, Robert K.; Krueger, Jerome A.

2010-01-01

To assist student understanding of heat transfer through woody stems, we developed an instructional package that included an Excel-based, one-dimensional simulation model and a companion instructional worksheet. Guiding undergraduate botany students to applying principles of thermodynamics to plants in nature is fraught with two main obstacles:…

A Tools-Based Approach to Teaching Data Mining Methods

ERIC Educational Resources Information Center

Jafar, Musa J.

2010-01-01

Data mining is an emerging field of study in Information Systems programs. Although the course content has been streamlined, the underlying technology is still in a state of flux. The purpose of this paper is to describe how we utilized Microsoft Excel's data mining add-ins as a front-end to Microsoft's Cloud Computing and SQL Server 2008 Business…

Using Microsoft Office Excel 2007 to conduct generalized matching analyses.

PubMed

Reed, Derek D

2009-01-01

The generalized matching equation is a robust and empirically supported means of analyzing relations between reinforcement and behavior. Unfortunately, no simple task analysis is available to behavior analysts interested in using the matching equation to evaluate data in clinical or applied settings. This technical article presents a task analysis for the use of Microsoft Excel to analyze and plot the generalized matching equation. Using a data-based case example and a step-by-step guide for completing the analysis, these instructions are intended to promote the use of quantitative analyses by researchers with little to no experience in quantitative analyses or the matching law.

A Tutorial on the Use of Excel 2010 and Excel for Mac 2011 for Conducting Delay-Discounting Analyses

ERIC Educational Resources Information Center

Reed, Derek D.; Kaplan, Brent A.; Brewer, Adam T.

2012-01-01

In recent years, researchers and practitioners in the behavioral sciences have profited from a growing literature on delay discounting. The purpose of this article is to provide readers with a brief tutorial on how to use Microsoft Office Excel 2010 and Excel for Mac 2011 to analyze discounting data to yield parameters for both the hyperbolic…

Data acquisition and real-time control using spreadsheets: interfacing Excel with external hardware.

PubMed

Aliane, Nourdine

2010-07-01

Spreadsheets have become a popular computational tool and a powerful platform for performing engineering calculations. Moreover, spreadsheets include a macro language, which permits the inclusion of standard computer code in worksheets, and thereby enable developers to greatly extend spreadsheets' capabilities by designing specific add-ins. This paper describes how to use Excel spreadsheets in conjunction to Visual Basic for Application programming language to perform data acquisition and real-time control. Afterwards, the paper presents two Excel applications with interactive user interfaces developed for laboratory demonstrations and experiments in an introductory course in control. 2010 ISA. Published by Elsevier Ltd. All rights reserved.

WASP (Write a Scientific Paper) using Excel 9: Analysis of variance.

PubMed

Grech, Victor

2018-06-01

Analysis of variance (ANOVA) may be required by researchers as an inferential statistical test when more than two means require comparison. This paper explains how to perform ANOVA in Microsoft Excel. Copyright © 2018 Elsevier B.V. All rights reserved.

Microsoft Office 365 Deployment Continues through June at NCI at Frederick | Poster

Cancer.gov

The latest Microsoft suite, Office 365 (O365), is being deployed to all NCI at Frederick computers during the months of May and June to comply with federal mandates. The suite includes the latest versions of Word, Excel, Outlook, PowerPoint, and Skype for Business, along with cloud-based capabilities. These cloud-based capabilities will help meet the federal mandates that

Institutional Transformation 2.5 Building Module Help Manual.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Villa, Daniel

The Institutional Transformation (IX) building module is a software tool developed at Sandia National Laboratories to evaluate energy conservation measures (ECMs) on hundreds of DOE-2 building energy models simultaneously. In IX, ECMs can be designed through parameterizing DOE-2 building models and doing further processing via visual basic for applications subroutines. IX provides the functionality to handle multiple building models for different years, which enables incrementally changing a site of hundreds of buildings over time. It also enables evaluation of the effects of changing climate, comparisons between data and modeling results, and energy use of centralized utility buildings (CUBs). IX consistsmore » of a Microsoft Excel(r) user interface, Microsoft Access(r) database, and Microsoft Excel(r) CUB build utility whose functionalities are described in detail in this report. In addition to descriptions of the user interfaces, descriptions of every ECM already designed in IX is included. SAND2016-8983 IX 2.5 Help Manual« less

Error Propagation Made Easy--Or at Least Easier

ERIC Educational Resources Information Center

Gardenier, George H.; Gui, Feng; Demas, James N.

2011-01-01

Complex error propagation is reduced to formula and data entry into a Mathcad worksheet or an Excel spreadsheet. The Mathcad routine uses both symbolic calculus analysis and Monte Carlo methods to propagate errors in a formula of up to four variables. Graphical output is used to clarify the contributions to the final error of each of the…

JEDI Transmission Line Model | Jobs and Economic Development Impact Models

Science.gov Websites

, reasonable default values are provided. Individual projects may vary and when possible, project specific data Line Model rel. TL12.23.16. JEDI Transmission Line Model User Reference Guide Using MS Excel 2007 When ;High." Set the level to "Medium" or "Low" and then re-open the JEDI worksheet

Using and Evaluating Resampling Simulations in SPSS and Excel.

ERIC Educational Resources Information Center

Smith, Brad

2003-01-01

Describes and evaluates three computer-assisted simulations used with Statistical Package for the Social Sciences (SPSS) and Microsoft Excel. Designed the simulations to reinforce and enhance student understanding of sampling distributions, confidence intervals, and significance tests. Reports evaluations revealed improved student comprehension of…

Diurnal Ensemble Surface Meteorology Statistics

EPA Pesticide Factsheets

Excel file containing diurnal ensemble statistics of 2-m temperature, 2-m mixing ratio and 10-m wind speed. This Excel file contains figures for Figure 2 in the paper and worksheets containing all statistics for the 14 members of the ensemble and a base simulation.This dataset is associated with the following publication:Gilliam , R., C. Hogrefe , J. Godowitch, S. Napelenok , R. Mathur , and S.T. Rao. Impact of inherent meteorology uncertainty on air quality model predictions. JOURNAL OF GEOPHYSICAL RESEARCH-ATMOSPHERES. American Geophysical Union, Washington, DC, USA, 120(23): 12,259–12,280, (2015).

Simulation of complex pharmacokinetic models in Microsoft Excel.

PubMed

Meineke, Ingolf; Brockmöller, Jürgen

2007-12-01

With the arrival of powerful personal computers in the office numerical methods are accessible to everybody. Simulation of complex processes therefore has become an indispensible tool in research and education. In this paper Microsoft EXCEL is used as a platform for a universal differential equation solver. The software is designed as an add-in aiming at a minimum of required user input to perform a given task. Four examples are included to demonstrate both, the simplicity of use and the versatility of possible applications. While the layout of the program is admittedly geared to the needs of pharmacokineticists, it can be used in any field where sets of differential equations are involved. The software package is available upon request.

GenAlEx 6.5: genetic analysis in Excel. Population genetic software for teaching and research—an update

PubMed Central

Peakall, Rod; Smouse, Peter E.

2012-01-01

Summary: GenAlEx: Genetic Analysis in Excel is a cross-platform package for population genetic analyses that runs within Microsoft Excel. GenAlEx offers analysis of diploid codominant, haploid and binary genetic loci and DNA sequences. Both frequency-based (F-statistics, heterozygosity, HWE, population assignment, relatedness) and distance-based (AMOVA, PCoA, Mantel tests, multivariate spatial autocorrelation) analyses are provided. New features include calculation of new estimators of population structure: G′ST, G′′ST, Jost’s Dest and F′ST through AMOVA, Shannon Information analysis, linkage disequilibrium analysis for biallelic data and novel heterogeneity tests for spatial autocorrelation analysis. Export to more than 30 other data formats is provided. Teaching tutorials and expanded step-by-step output options are included. The comprehensive guide has been fully revised. Availability and implementation: GenAlEx is written in VBA and provided as a Microsoft Excel Add-in (compatible with Excel 2003, 2007, 2010 on PC; Excel 2004, 2011 on Macintosh). GenAlEx, and supporting documentation and tutorials are freely available at: http://biology.anu.edu.au/GenAlEx. Contact: rod.peakall@anu.edu.au PMID:22820204

PKSolver: An add-in program for pharmacokinetic and pharmacodynamic data analysis in Microsoft Excel.

PubMed

Zhang, Yong; Huo, Meirong; Zhou, Jianping; Xie, Shaofei

2010-09-01

This study presents PKSolver, a freely available menu-driven add-in program for Microsoft Excel written in Visual Basic for Applications (VBA), for solving basic problems in pharmacokinetic (PK) and pharmacodynamic (PD) data analysis. The program provides a range of modules for PK and PD analysis including noncompartmental analysis (NCA), compartmental analysis (CA), and pharmacodynamic modeling. Two special built-in modules, multiple absorption sites (MAS) and enterohepatic circulation (EHC), were developed for fitting the double-peak concentration-time profile based on the classical one-compartment model. In addition, twenty frequently used pharmacokinetic functions were encoded as a macro and can be directly accessed in an Excel spreadsheet. To evaluate the program, a detailed comparison of modeling PK data using PKSolver and professional PK/PD software package WinNonlin and Scientist was performed. The results showed that the parameters estimated with PKSolver were satisfactory. In conclusion, the PKSolver simplified the PK and PD data analysis process and its output could be generated in Microsoft Word in the form of an integrated report. The program provides pharmacokinetic researchers with a fast and easy-to-use tool for routine and basic PK and PD data analysis with a more user-friendly interface. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

Improving the Plasticity of LIMS Implementation: LIMS Extension through Microsoft Excel

NASA Technical Reports Server (NTRS)

Culver, Mark

2017-01-01

A Laboratory Information Management System (LIMS) is a databasing software with many built-in tools ideal for handling and documenting most laboratory processes in an accurate and consistent manner, making it an indispensable tool for the modern laboratory. However, a lot of LIMS end users will find that in the performance of analyses that have unique considerations such as standard curves, multiple stages incubations, or logical considerations, a base LIMS distribution may not ideally suit their needs. These considerations bring about the need for extension languages, which can extend the functionality of a LIMS. While these languages do provide the implementation team the functionality required to accommodate these special laboratory analyses, they are usually too complex for the end user to modify to compensate for natural changes in laboratory operations. The LIMS utilized by our laboratory offers a unique and easy-to-use choice for an extension language, one that is already heavily relied upon not only in science but also in most academic and business pursuits: Microsoft Excel. The validity of Microsoft Excel as a pseudo programming language and its usability and versatility as a LIMS extension language will be discussed. The NELAC implications and overall drawbacks of this LIMS configuration will also be discussed.

IDEOM: an Excel interface for analysis of LC-MS-based metabolomics data.

PubMed

Creek, Darren J; Jankevics, Andris; Burgess, Karl E V; Breitling, Rainer; Barrett, Michael P

2012-04-01

The application of emerging metabolomics technologies to the comprehensive investigation of cellular biochemistry has been limited by bottlenecks in data processing, particularly noise filtering and metabolite identification. IDEOM provides a user-friendly data processing application that automates filtering and identification of metabolite peaks, paying particular attention to common sources of noise and false identifications generated by liquid chromatography-mass spectrometry (LC-MS) platforms. Building on advanced processing tools such as mzMatch and XCMS, it allows users to run a comprehensive pipeline for data analysis and visualization from a graphical user interface within Microsoft Excel, a familiar program for most biological scientists. IDEOM is provided free of charge at http://mzmatch.sourceforge.net/ideom.html, as a macro-enabled spreadsheet (.xlsb). Implementation requires Microsoft Excel (2007 or later). R is also required for full functionality. michael.barrett@glasgow.ac.uk Supplementary data are available at Bioinformatics online.

Evaluation of the preimplantation worksheet in determining Calypso eligibility for men prescribed postprostatectomy radiotherapy with electromagnetic transponder guidance.

PubMed

Hamilton, Daniel George; Jones, Kingsley; So, Kevin

2017-01-01

This study aimed to assess the design and performance of the preimplant suitability worksheet in determining Calypso eligibility for prostate cancer patients prescribed postprostatectomy radiotherapy with electromagnetic transponder guidance. The medical records and radiotherapy planning datasets of 75 patients prospectively recruited between June 2015 and September 2016 to a Phase 2 trial evaluating electromagnetic transponder-guided postprostatectomy radiotherapy were retrospectively examined. Correlation and differences between computed tomography (CT)-defined greater trochanter and prostatic fossa landmarks were evaluated. Receiver operating characteristic curves were also generated to assess the expected and observed accuracy of the worksheet in determining Calypso eligibility. Strong correlation was demonstrated between anterior surface to planning CT-defined greater trochanter and prostate bed center distances (r = 0.95, p <0.001), with a mean difference between measurements of 1.1 cm (95% confidence interval [CI]: 0.9 to 1.3). A similar correlation coefficient was found for surface to greater trochanter location and posterior beacon location (r = 0.92, p <0.001) but with a reduced mean difference of 0.4 cm (95% CI: 0.1 to 0.6). Performance of the worksheet as assessed by planning CT data demonstrated excellent accuracy as a test to determine eligibility (area under the curve: 0.97; 95% CI: 0.92 to 1.00); however, this was not replicated using the same data captured clinically (area under the curve 0.83; 95% CI: 0.68 to 0.98). Although the greater trochanter is a good surrogate for the prostate bed center, it is better associated with the posterior beacon location. As a result, the worksheet will underestimate the truly eligible population if performed accurately and according to manufacturer guidelines. Theoretically, the worksheet could be improved if a cut off of 20 cm is used and the greater trochanter is accurately identified; however, the latter appears to be difficult to achieve in practice. Copyright © 2017 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

WASP (Write a Scientific Paper) using Excel - 10: Contingency tables.

PubMed

Grech, Victor

2018-06-01

Contingency tables may be required to perform chi-test analyses. This provides pointers as to how to do this in Microsoft Excel and explains how to set up methods to calculate confidence intervals for proportions, including proportions with zero numerators. Copyright © 2018 Elsevier B.V. All rights reserved.

WASP (Write a Scientific Paper) using Excel - 12: Odds ratio and relative risk.

PubMed

Grech, Victor

2018-07-01

The calculation of odds ratios and relative risks may be required as part of a data analysis exercise. This paper explains how to set up these calculations in Microsoft Excel from a two by two contingency table. Copyright © 2018 Elsevier B.V. All rights reserved.

Textbooks for Responsible Data Analysis in Excel

ERIC Educational Resources Information Center

Garrett, Nathan

2015-01-01

With 27 million users, Excel (Microsoft Corporation, Seattle, WA) is the most common business data analysis software. However, audits show that almost all complex spreadsheets have errors. The author examined textbooks to understand why responsible data analysis is taught. A purposeful sample of 10 textbooks was coded, and then compared against…

[DNAStat, version 1.2 -- a software package for processing genetic profile databases and biostatistical calculations].

PubMed

Berent, Jarosław

2007-01-01

This paper presents the new DNAStat version 1.2 for processing genetic profile databases and biostatistical calculations. This new version contains, besides all the options of its predecessor 1.0, a calculation-results file export option in .xls format for Microsoft Office Excel, as well as the option of importing/exporting the population base of systems as .txt files for processing in Microsoft Notepad or EditPad

Development of the ECLSS Sizing Analysis Tool and ARS Mass Balance Model Using Microsoft Excel

NASA Technical Reports Server (NTRS)

McGlothlin, E. P.; Yeh, H. Y.; Lin, C. H.

1999-01-01

The development of a Microsoft Excel-compatible Environmental Control and Life Support System (ECLSS) sizing analysis "tool" for conceptual design of Mars human exploration missions makes it possible for a user to choose a certain technology in the corresponding subsystem. This tool estimates the mass, volume, and power requirements of every technology in a subsystem and the system as a whole. Furthermore, to verify that a design sized by the ECLSS Sizing Tool meets the mission requirements and integrates properly, mass balance models that solve for component throughputs of such ECLSS systems as the Water Recovery System (WRS) and Air Revitalization System (ARS) must be developed. The ARS Mass Balance Model will be discussed in this paper.

Estimation of pharmacokinetic parameters from non-compartmental variables using Microsoft Excel.

PubMed

Dansirikul, Chantaratsamon; Choi, Malcolm; Duffull, Stephen B

2005-06-01

This study was conducted to develop a method, termed 'back analysis (BA)', for converting non-compartmental variables to compartment model dependent pharmacokinetic parameters for both one- and two-compartment models. A Microsoft Excel spreadsheet was implemented with the use of Solver and visual basic functions. The performance of the BA method in estimating pharmacokinetic parameter values was evaluated by comparing the parameter values obtained to a standard modelling software program, NONMEM, using simulated data. The results show that the BA method was reasonably precise and provided low bias in estimating fixed and random effect parameters for both one- and two-compartment models. The pharmacokinetic parameters estimated from the BA method were similar to those of NONMEM estimation.

Monte Carlo simulation of parameter confidence intervals for non-linear regression analysis of biological data using Microsoft Excel.

PubMed

Lambert, Ronald J W; Mytilinaios, Ioannis; Maitland, Luke; Brown, Angus M

2012-08-01

This study describes a method to obtain parameter confidence intervals from the fitting of non-linear functions to experimental data, using the SOLVER and Analysis ToolPaK Add-In of the Microsoft Excel spreadsheet. Previously we have shown that Excel can fit complex multiple functions to biological data, obtaining values equivalent to those returned by more specialized statistical or mathematical software. However, a disadvantage of using the Excel method was the inability to return confidence intervals for the computed parameters or the correlations between them. Using a simple Monte-Carlo procedure within the Excel spreadsheet (without recourse to programming), SOLVER can provide parameter estimates (up to 200 at a time) for multiple 'virtual' data sets, from which the required confidence intervals and correlation coefficients can be obtained. The general utility of the method is exemplified by applying it to the analysis of the growth of Listeria monocytogenes, the growth inhibition of Pseudomonas aeruginosa by chlorhexidine and the further analysis of the electrophysiological data from the compound action potential of the rodent optic nerve. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Estimating Basic Preliminary Design Performances of Aerospace Vehicles

NASA Technical Reports Server (NTRS)

Luz, Paul L.; Alexander, Reginald

2004-01-01

Aerodynamics and Performance Estimation Toolset is a collection of four software programs for rapidly estimating the preliminary design performance of aerospace vehicles represented by doing simplified calculations based on ballistic trajectories, the ideal rocket equation, and supersonic wedges through standard atmosphere. The program consists of a set of Microsoft Excel worksheet subprograms. The input and output data are presented in a user-friendly format, and calculations are performed rapidly enough that the user can iterate among different trajectories and/or shapes to perform "what-if" studies. Estimates that can be computed by these programs include: 1. Ballistic trajectories as a function of departure angles, initial velocities, initial positions, and target altitudes; assuming point masses and no atmosphere. The program plots the trajectory in two-dimensions and outputs the position, pitch, and velocity along the trajectory. 2. The "Rocket Equation" program calculates and plots the trade space for a vehicle s propellant mass fraction over a range of specific impulse and mission velocity values, propellant mass fractions as functions of specific impulses and velocities. 3. "Standard Atmosphere" will estimate the temperature, speed of sound, pressure, and air density as a function of altitude in a standard atmosphere, properties of a standard atmosphere as functions of altitude. 4. "Supersonic Wedges" will calculate the free-stream, normal-shock, oblique-shock, and isentropic flow properties for a wedge-shaped body flying supersonically through a standard atmosphere. It will also calculate the maximum angle for which a shock remains attached, and the minimum Mach number for which a shock becomes attached, all as functions of the wedge angle, altitude, and Mach number.

How much does it cost to achieve coverage targets for primary healthcare services? A costing model from Aceh, Indonesia.

PubMed

Abdullah, Asnawi; Hort, Krishna; Abidin, Azwar Zaenal; Amin, Fadilah M

2012-01-01

Despite significant investment in improving service infrastructure and training of staff, public primary healthcare services in low-income and middle-income countries tend to perform poorly in reaching coverage targets. One of the factors identified in Aceh, Indonesia was the lack of operational funds for service provision. The objective of this study was to develop a simple and transparent costing tool that enables health planners to calculate the unit costs of providing basic health services to estimate additional budgets required to deliver services in accordance with national targets. The tool was developed using a standard economic approach that linked the input activities to achieving six national priority programs at primary healthcare level: health promotion, sanitation and environment health, maternal and child health and family planning, nutrition, immunization and communicable diseases control, and treatment of common illness. Costing was focused on costs of delivery of the programs that need to be funded by local government budgets. The costing tool consisting of 16 linked Microsoft Excel worksheets was developed and tested in several districts enabled the calculation of the unit costs of delivering of the six national priority programs per coverage target of each program (such as unit costs of delivering of maternal and child health program per pregnant mother). This costing tool can be used by health planners to estimate additional money required to achieve a certain level of coverage of programs, and it can be adjusted for different costs and program delivery parameters in different settings. Copyright © 2012 John Wiley & Sons, Ltd.

Visual outcomes of patients bilaterally implanted with the extended range of vision intraocular lens: A prospective study

PubMed Central

Sachdev, Gitansha Shreyas; Ramamurthy, Shreyas; Sharma, Umesh; Dandapani, Ramamurthy

2018-01-01

Purpose: The aim of this study was to analyze the objective and subjective visual outcomes of patients bilaterally implanted with the extended range of vision intraocular lens (EROV IOL), the Tecnis Symfony. Methods: This was a prospective interventional case series conducted at a tertiary eye care hospital in South India. The study included patients with bilateral implantation of EROV IOLs. The uncorrected and corrected visual acuity for distance, intermediate, and near vision was recorded at 6 weeks and 6 months’ postoperative visit. A subjective questionnaire was administered to assess spectacle independence, photic phenomenon, and overall satisfaction. All data were recorded using Microsoft Excel worksheet. The analyses were performed using SPSS for windows software. Results: Our study included fifty patients with bilateral implantation of EROV IOLs. The mean age was 59.84 ± 11.68 years. The mean uncorrected binocular distance, intermediate, and near visual acuity (in standard decimal equivalent) was 0.89,0.99 and 0.99 respectively, at 6 months’ postoperative visit. Ninety-six percent of the patients did not require spectacles for distance and 98% of the patients were free from spectacles for intermediate and near vision. 94% of our patients perceived no or minimal photic phenomena such as glare and halos. The mean subjective patient satisfaction score (out of 10) for distance, intermediate, and near was 9, 10, and 9, respectively. Conclusion: The EROV IOLs demonstrated high levels of spectacle independence for distance, intermediate, and near vision. The incidence of photic phenomena observed was minimal with a high level of patient satisfaction. PMID:29480252

Developpement d'un catalogue de conception des chaussee pour les pays sub-sahariens

NASA Astrophysics Data System (ADS)

Koubikana Pambou, Claude Hugo

Pavement surface evaluation in Sub-Saharan Africa (SSA) reveals severe, premature, and costly damages that require extensive maintenance. This is due to the limitations of tools used for pavement structural design as well as and the lack of the available calibration for the materials used. It is necessary to search for solutions for these failures and: * feed the discussion on durable roads for SSA area to meet the expectations of the trans- African highway projects of the new partnership for Africa (NEPAD); * provide simple and effective tools for pavement design and promote low cost for maintenance of road infrastructures; * provide users with functional and safety and durable road system. This catalogue, object and result of this work, was developed through a new tool for structural design (OCS-Chaussee), computed using Microsoft Excel worksheet. It uses iteration through empirical mechanics (ME) methods, applied to multilayer linear analysis using Odemark - Boussinesq method as a theoretical and conceptual basis for design pavement. The verification of obtained results was done with viscoelasticity assumption according Quijano's data (2010) and the pavement analysis software WINJULEA developed by US Army Corps of Engineers (USACE) and with the backcalculation's data from Varik and al. (2002) and local's data from South-African. The lifetime of each proposed roadway was estimated by using Asphalt Institute's transfer function and the Miner's law. It's hope that thoughtful use of this catalogue and the OCS- Chaussee will help advance reasonable road engineering solutions approaches, and training and make profitable budgets allocated to the construction and to road rehabilitation in Sub-Saharan Africa.

WASP (Write a Scientific Paper) using Excel - 11: Test characteristics.

PubMed

Grech, Victor

2018-07-01

The calculation of various test characteristics may be required as part of a data analysis exercise. This paper explains how to set up these calculations in Microsoft Excel in order to obtain sensitivity, specificity, positive and negative predictive values, diagnostic accuracy and prevalence. Copyright © 2018 Elsevier B.V. All rights reserved.

Using Information Technology in Teaching of Business Statistics in Nigeria Business School

ERIC Educational Resources Information Center

Hamadu, Dallah; Adeleke, Ismaila; Ehie, Ike

2011-01-01

This paper discusses the use of Microsoft Excel software in the teaching of statistics in the Faculty of Business Administration at the University of Lagos, Nigeria. Problems associated with existing traditional methods are identified and a novel pedagogy using Excel is proposed. The advantages of using this software over other specialized…

Equilibrator: Modeling Chemical Equilibria with Excel

ERIC Educational Resources Information Center

Vander Griend, Douglas A.

2011-01-01

Equilibrator is a Microsoft Excel program for learning about chemical equilibria through modeling, similar in function to EQS4WIN, which is no longer supported and does not work well with newer Windows operating systems. Similar to EQS4WIN, Equilibrator allows the user to define a system with temperature, initial moles, and then either total…

Illustrating Consumer Theory with the CES Utility Function

ERIC Educational Resources Information Center

Tohamy, Soumaya M.; Mixon, J. Wilson, Jr.

2004-01-01

The authors use Microsoft Excel to derive compensated and uncompensated demand curves. They use a constant elasticity of substitution (CES) utility function to show how changes in a good's price or income affect the quantities demanded of that good and of the other composite good, using Excel's Solver. They provide three contributions. First, they…

Rapid Equipping Force (REF) Analytical Support

DTIC Science & Technology

2007-06-01

document contains color images. 14. ABSTRACT 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER OF PAGES 44...interface and performs actions via Excel formulae, ActiveX controls, and VBA code. – Plan to provide both simple and complex weighting and scoring methods...Requirements Quad Chart. –Solution Set Information Worksheet: A spreadsheet containing detailed information concerning every potential solution considered

CProb: a computational tool for conducting conditional probability analysis.

PubMed

Hollister, Jeffrey W; Walker, Henry A; Paul, John F

2008-01-01

Conditional probability is the probability of observing one event given that another event has occurred. In an environmental context, conditional probability helps to assess the association between an environmental contaminant (i.e., the stressor) and the ecological condition of a resource (i.e., the response). These analyses, when combined with controlled experiments and other methodologies, show great promise in evaluating ecological conditions from observational data and in defining water quality and other environmental criteria. Current applications of conditional probability analysis (CPA) are largely done via scripts or cumbersome spreadsheet routines, which may prove daunting to end-users and do not provide access to the underlying scripts. Combining spreadsheets with scripts eases computation through a familiar interface (i.e., Microsoft Excel) and creates a transparent process through full accessibility to the scripts. With this in mind, we developed a software application, CProb, as an Add-in for Microsoft Excel with R, R(D)com Server, and Visual Basic for Applications. CProb calculates and plots scatterplots, empirical cumulative distribution functions, and conditional probability. In this short communication, we describe CPA, our motivation for developing a CPA tool, and our implementation of CPA as a Microsoft Excel Add-in. Further, we illustrate the use of our software with two examples: a water quality example and a landscape example. CProb is freely available for download at http://www.epa.gov/emap/nca/html/regions/cprob.

Use of a Microsoft Excel based add-in program to calculate plasma sinistrin clearance by a two-compartment model analysis in dogs.

PubMed

Steinbach, Sarah M L; Sturgess, Christopher P; Dunning, Mark D; Neiger, Reto

2015-06-01

Assessment of renal function by means of plasma clearance of a suitable marker has become standard procedure for estimation of glomerular filtration rate (GFR). Sinistrin, a polyfructan solely cleared by the kidney, is often used for this purpose. Pharmacokinetic modeling using adequate software is necessary to calculate disappearance rate and half-life of sinistrin. The purpose of this study was to describe the use of a Microsoft excel based add-in program to calculate plasma sinistrin clearance, as well as additional pharmacokinetic parameters such as transfer rates (k), half-life (t1/2) and volume of distribution (Vss) for sinistrin in dogs with varying degrees of renal function. Copyright © 2015 Elsevier Ltd. All rights reserved.

Self-scheduling with Microsoft Excel.

PubMed

Irvin, S A; Brown, H N

1999-01-01

Excessive time was being spent by the emergency department (ED) staff, head nurse, and unit secretary on a complex 6-week manual self-scheduling system. This issue, plus inevitable errors and staff dissatisfaction, resulted in a manager-lead initiative to automate elements of the scheduling process using Microsoft Excel. The implementation of this initiative included: common coding of all 8-hour and 12-hour shifts, with each 4-hour period represented by a cell; the creation of a 6-week master schedule using the "count-if" function of Excel based on current staffing guidelines; staff time-off requests then entered by the department secretary; the head nurse, with staff input, then fine-tuned the schedule to provide even unit coverage. Outcomes of these changes included an increase in staff satisfaction, time saved by the head nurse, and staff work time saved because there was less arguing about the schedule. Ultimately, the automated self-scheduling method was expanded to the entire 700-bed hospital.

Individualized Human CAD Models: Anthropmetric Morphing and Body Tissue Layering

DTIC Science & Technology

2014-07-31

Part Flow Chart of the Interaction among VBA Macros, Excel® Spreadsheet, and SolidWorks Front View of the Male and Female Soldier CAD Model...yellow highlighting. The spreadsheet is linked to the CAD model by macros created with the Visual Basic for Application ( VBA ) editor in Microsoft Excel...basically three working parts to the anthropometric morphing that are all interconnected ( VBA macros, Excel spreadsheet, and SolidWorks). The flow

WASP (Write a Scientific Paper) using Excel - 8: t-Tests.

PubMed

Grech, Victor

2018-06-01

t-Testing is a common component of inferential statistics when comparing two means. This paper explains the central limit theorem and the concept of the null hypothesis as well as types of errors. On the practical side, this paper outlines how different t-tests may be performed in Microsoft Excel, for different purposes, both statically as well as dynamically, with Excel's functions. Copyright © 2018 Elsevier B.V. All rights reserved.

The Stag Hunt Game: An Example of an Excel-Based Probabilistic Game

ERIC Educational Resources Information Center

Bridge, Dave

2016-01-01

With so many role-playing simulations already in the political science education literature, the recent repeated calls for new games is both timely and appropriate. This article answers and extends those calls by advocating the creation of probabilistic games using Microsoft Excel. I introduce the example of the Stag Hunt Game--a short, effective,…

Microsoft Excel®: Is It an Important Job Skill for College Graduates?

ERIC Educational Resources Information Center

Formby, Sam K.; Medlin, B. Dawn; Ellington, Virginia

2017-01-01

Several studies have found that a large percentage of middle-skilled jobs require at least a basic understanding of spreadsheets, and some even advanced level skills. A study was conducted at a four-year university to identify Excel skill sets that were determined as necessary by employers of the university's current students, advisory boards,…

Preparing Content-Rich Learning Environments with VPython and Excel, Controlled by Visual Basic for Applications

ERIC Educational Resources Information Center

Prayaga, Chandra

2008-01-01

A simple interface between VPython and Microsoft (MS) Office products such as Word and Excel, controlled by Visual Basic for Applications, is described. The interface allows the preparation of content-rich, interactive learning environments by taking advantage of the three-dimensional (3D) visualization capabilities of VPython and the GUI…

JMAT 2.0 Operating Room Requirements Estimation Study

DTIC Science & Technology

2011-05-25

Health Research Center 140 Sylvester Rd. San Diego, CA 92106-3521 Report No. 11-10J, supported by the Office of the Assistant...expected-value methodology for estimating OR requirements in a theater hospital; (b) algorithms for estimating a special case OR table requirement...assuming the probabilities of entering the OR are either 1 or 0; and (c) an Excel worksheet that calculates the special case OR table estimates

Agile Task Tracking Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duke, Roger T.; Crump, Thomas Vu

The work was created to provide a tool for the purpose of improving the management of tasks associated with Agile projects. Agile projects are typically completed in an iterative manner with many short duration tasks being performed as part of iterations. These iterations are generally referred to as sprints. The objective of this work is to create a single tool that enables sprint teams to manage all of their tasks in multiple sprints and automatically produce all standard sprint performance charts with minimum effort. The format of the printed work is designed to mimic a standard Kanban board. The workmore » is developed as a single Excel file with worksheets capable of managing up to five concurrent sprints and up to one hundred tasks. It also includes a summary worksheet providing performance information from all active sprints. There are many commercial project management systems typically designed with features desired by larger organizations with many resources managing multiple programs and projects. The audience for this work is the small organizations and Agile project teams desiring an inexpensive, simple, user-friendly, task management tool. This work uses standard readily available software, Excel, requiring minimum data entry and automatically creating summary charts and performance data. It is formatted to print out and resemble standard flip charts and provide the visuals associated with this type of work.« less

Teaching physics using Microsoft Excel

NASA Astrophysics Data System (ADS)

Uddin, Zaheer; Ahsanuddin, Muhammad; Khan, Danish Ahmed

2017-09-01

Excel is both ubiquitous and easily understandable. Most people from every walk of life know how to use MS office and Excel spreadsheets. Students are also familiar with spreadsheets. Most students know how to use spreadsheets for data analysis. Besides basic use of Excel, some important aspects of spreadsheets are highlighted in this article. MS Excel can be used to visualize effects of various parameters in a physical system. It can be used as a simulating tool; simulation of wind data has been done through spreadsheets in this study. Examples of Lissajous figures and a damped harmonic oscillator are presented in this article.

Energy Consumption Database

Science.gov Websites

Consumption Database The California Energy Commission has created this on-line database for informal reporting ) classifications. The database also provides easy downloading of energy consumption data into Microsoft Excel (XLSX

"Utstein style" spreadsheet and database programs based on Microsoft Excel and Microsoft Access software for CPR data management of in-hospital resuscitation.

PubMed

Adams, Bruce D; Whitlock, Warren L

2004-04-01

In 1997, The American Heart Association in association with representatives of the International Committee on Resuscitation (ILCOR) published recommended guidelines for reviewing, reporting and conducting in-hospital cardiopulmonary resuscitation (CPR) outcomes using the "Utstein style". Using these guidelines, we developed two Microsoft Office based database management programs that may be useful to the resuscitation community. We developed a user-friendly spreadsheet based on MS Office Excel. The user enters patient variables such as name, age, and diagnosis. Then, event resuscitation variables such as time of collapse and CPR team arrival are entered from a "code flow sheet". Finally, outcome variables such as patient condition at different time points are recorded. The program then makes automatic calculations of average response times, survival rates and other important outcome measurements. Also using the Utstein style, we developed a database program based on MS Office Access. To promote free public access to these programs, we established at a website. These programs will help hospitals track, analyze, and present their CPR outcomes data. Clinical CPR researchers might also find the programs useful because they are easily modified and have statistical functions.

Chemicalome and metabolome profiling of polymethoxylated flavonoids in Citri Reticulatae Pericarpium based on an integrated strategy combining background subtraction and modified mass defect filter in a Microsoft Excel Platform.

PubMed

Zeng, Su-Ling; Duan, Li; Chen, Bai-Zhong; Li, Ping; Liu, E-Hu

2017-07-28

Detection of metabolites in complex biological matrixes is a great challenge because of the background noise and endogenous components. Herein, we proposed an integrated strategy that combined background subtraction program and modified mass defect filter (MMDF) data mining in a Microsoft Excel platform for chemicalome and metabolome profiling of the polymethoxylated flavonoids (PMFs) in Citri Reticulatae Pericarpium (CRP). The exogenously-sourced ions were firstly filtered out by the developed Visual Basic for Applications (VBA) program incorporated in the Microsoft Office. The novel MMDF strategy was proposed for detecting both target and untarget constituents and metabolites based on narrow, well-defined mass defect ranges. The approach was validated to be powerful, and potentially useful for the metabolite identification of both single compound and homologous compound mixture. We successfully identified 30 and 31 metabolites from rat biosamples after oral administration of nobiletin and tangeretin, respectively. A total of 56 PMFs compounds were chemically characterized and 125 metabolites were captured. This work demonstrated the feasibility of the integrated approach for reliable characterization of the constituents and metabolites in herbal medicines. Copyright © 2017 Elsevier B.V. All rights reserved.

Geohydrologic and water-quality characterization of a fractured-bedrock test hole in an area of Marcellus shale gas development, Bradford County, Pennsylvania

USGS Publications Warehouse

Risser, Dennis W.; Williams, John H.; Hand, Kristen L.; Behr, Rose-Anna; Markowski, Antonette K.

2013-01-01

Open-File Miscellaneous Investigation 13–01.1 presents the results of geohydrologic investigations on a 1,664-foot-deep core hole drilled in the Bradford County part of the Gleason 7.5-minute quadrangle in north-central Pennsylvania. In the text, the authors discuss their methods of investigation, summarize physical and analytical results, and place those results in context. Four appendices include (1) a full description of the core in an Excel worksheet; (2) water-quality and core-isotope analytical results in Excel workbooks; (3) geophysical logs in LAS and PDF files, and an Excel workbook containing attitudes of bedding and fractures calculated from televiewer logs; and (4) MP4 clips from the downhole video at selected horizons.

User's Manual: Routines for Radiative Heat Transfer and Thermometry

NASA Technical Reports Server (NTRS)

Risch, Timothy K.

2016-01-01

Determining the intensity and spectral distribution of radiation emanating from a heated surface has applications in many areas of science and engineering. Areas of research in which the quantification of spectral radiation is used routinely include thermal radiation heat transfer, infrared signature analysis, and radiation thermometry. In the analysis of radiation, it is helpful to be able to predict the radiative intensity and the spectral distribution of the emitted energy. Presented in this report is a set of routines written in Microsoft Visual Basic for Applications (VBA) (Microsoft Corporation, Redmond, Washington) and incorporating functions specific to Microsoft Excel (Microsoft Corporation, Redmond, Washington) that are useful for predicting the radiative behavior of heated surfaces. These routines include functions for calculating quantities of primary importance to engineers and scientists. In addition, the routines also provide the capability to use such information to determine surface temperatures from spectral intensities and for calculating the sensitivity of the surface temperature measurements to unknowns in the input parameters.

SU-E-T-103: Development and Implementation of Web Based Quality Control Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Studinski, R; Taylor, R; Angers, C

Purpose: Historically many radiation medicine programs have maintained their Quality Control (QC) test results in paper records or Microsoft Excel worksheets. Both these approaches represent significant logistical challenges, and are not predisposed to data review and approval. It has been our group's aim to develop and implement web based software designed not just to record and store QC data in a centralized database, but to provide scheduling and data review tools to help manage a radiation therapy clinics Equipment Quality control program. Methods: The software was written in the Python programming language using the Django web framework. In order tomore » promote collaboration and validation from other centres the code was made open source and is freely available to the public via an online source code repository. The code was written to provide a common user interface for data entry, formalize the review and approval process, and offer automated data trending and process control analysis of test results. Results: As of February 2014, our installation of QAtrack+ has 180 tests defined in its database and has collected ∼22 000 test results, all of which have been reviewed and approved by a physicist via QATrack+'s review tools. These results include records for quality control of Elekta accelerators, CT simulators, our brachytherapy programme, TomoTherapy and Cyberknife units. Currently at least 5 other centres are known to be running QAtrack+ clinically, forming the start of an international user community. Conclusion: QAtrack+ has proven to be an effective tool for collecting radiation therapy QC data, allowing for rapid review and trending of data for a wide variety of treatment units. As free and open source software, all source code, documentation and a bug tracker are available to the public at https://bitbucket.org/tohccmedphys/qatrackplus/.« less

System Advisor Model (SAM) General Description (Version 2017.9.5)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeman, Janine M; DiOrio, Nicholas A; Blair, Nathan J

This document describes the capabilities of the System Advisor Model (SAM) developed and distributed by the U.S. Department of Energy's National Renewable Energy Laboratory. The document is for potential users and others wanting to learn about the model's capabilities. SAM is a techno-economic computer model that calculates performance and financial metrics of renewable energy projects. Project developers, policy makers, equipment manufacturers, and researchers use graphs and tables of SAM results in the process of evaluating financial, technology, and incentive options for renewable energy projects. SAM simulates the performance of photovoltaic, concentrating solar power, solar water heating, wind, geothermal, biomass, andmore » conventional power systems. The financial models are for projects that either buy and sell electricity at retail rates (residential and commercial) or sell electricity at a price determined in a power purchase agreement (PPA). SAM's simulation tools facilitate parametric and sensitivity analyses, Monte Carlo simulation and weather variability (P50/P90) studies. SAM can also read input variables from Microsoft Excel worksheets. For software developers, the SAM software development kit (SDK) makes it possible to use SAM simulation modules in their applications written in C/C plus plus, C sharp, Java, Python, MATLAB, and other languages. NREL provides both SAM and the SDK as free downloads at https://sam.nrel.gov. SAM is an open source project, so its source code is available to the public. Researchers can study the code to understand the model algorithms, and software programmers can contribute their own models and enhancements to the project. Technical support and more information about the software are available on the website.« less

Selected eating behaviours of girls and boys attending sport-oriented classes

PubMed

Szeja, Nicola; Szczepańska, Elżbieta; Janion, Karolina; Szymkiewicz, Anna; Lenard, Biruta; Dudzik, Izabela; Kołdon, Anna

Eating behaviours play a key role in lives of young people who stay physically active. They influence both their correct development and performance. Evaluation of selected eating behaviours of girls and boys attending sport-oriented classes and identification of differences between eating behaviours of studied groups. 460 students attending sport-oriented classes in Poland participated in the study. A questionnaire prepared by the author of the study was the research tool. The data was gathered in Microsoft Office Excel 2010 worksheet. Statistical analysis was made with the use of StatSoft, Inc. Statistica version 10.0. The questioned students most often had 4-5 meals a day- such an answer was given by 59.09% of the boys and 41.38% of the girls. 55.59% and 41.95% of them respectively had breakfast within 30 minutes from waking up and 41,96% of the girls and 39.51% of the boys had supper 2-3 hours before going to sleep. Whole meal bread and/or groats were most frequently consumed a few times a day as it was declared by 50.35% of the boys and 45.98% of the girls. The highest percentage of the respondents consumed vegetables at least once a day (31.61% of the girls and 31.47% of the boys). 44.83% of the girls and 40.9% of the boys declared eating fruit a few times a day. Studied eating behaviours of girls and boys in sport-oriented classes are largely wrong and require correction. The analysis of the gathered data indicated statistically significant differences between boys’ and girls’ eating behaviours, however, the boys’ habits were better.

Technical Data Exchange Software Tools Adapted to Distributed Microsatellite Design

NASA Astrophysics Data System (ADS)

Pache, Charly

2002-01-01

One critical issue concerning distributed design of satellites, is the collaborative work it requires. In particular, the exchange of data between each group responsible for each subsystem can be complex and very time-consuming. The goal of this paper is to present a design collaborative tool, the SSETI Design Model (SDM), specifically developed for enabling satellite distributed design. SDM is actually used in the ongoing Student Space Exploration &Technology (SSETI) initiative (www.sseti.net). SSETI is lead by European Space Agency (ESA) outreach office (http://www.estec.esa.nl/outreach), involving student groups from all over Europe for design, construction and launch of a microsatellite. The first part of this paper presents the current version of the SDM tool, a collection of Microsoft Excel linked worksheets, one for each subsystem. An overview of the project framework/structure is given, explaining the different actors, the flows between them, as well as the different types of data and the links - formulas - between data sets. Unified Modeling Language (UML) diagrams give an overview of the different parts . Then the SDM's functionalities, developed in VBA scripts (Visual Basic for Application), are introduced, as well as the interactive features, user interfaces and administration tools. The second part discusses the capabilities and limitations of SDM current version. Taking into account these capabilities and limitations, the third part outlines the next version of SDM, a web-oriented, database-driven evolution of the current version. This new approach will enable real-time data exchange and processing between the different actors of the mission. Comprehensive UML diagrams will guide the audience through the entire modeling process of such a system. Tradeoffs simulation capabilities, security, reliability, hardware and software issues will also be thoroughly discussed.

Use of Bibliographic Systems and Concept Maps: Innovative Tools to Complete a Literature Review

ERIC Educational Resources Information Center

Martelo, Maira L.

2011-01-01

This article presents a process for utilizing a bibliographic system built with Microsoft Excel as well as concept maps to organize and to synthesize information that can be included in a literature review. A review of the conceptual framework behind these tools is included as well as a detailed description about how to build the system in Excel.…

It's a Holiday!!

ERIC Educational Resources Information Center

Ratliff, Michael I.; Mc Shane, Janet M.

2008-01-01

This article studies various holiday distributions, the most interesting one being Easter. Gauss' Easter algorithm and Microsoft Excel are used to determine that the Easter distribution can be closely approximated by the convolution of two well-known uniform distributions. (Contains 8 figures.)

CADDIS Volume 4. Data Analysis: Download Software

EPA Pesticide Factsheets

Overview of the data analysis tools available for download on CADDIS. Provides instructions for downloading and installing CADStat, access to Microsoft Excel macro for computing SSDs, a brief overview of command line use of R, a statistical software.

A tutorial on the use of Excel 2010 and Excel for Mac 2011 for conducting delay-discounting analyses.

PubMed

Reed, Derek D; Kaplan, Brent A; Brewer, Adam T

2012-01-01

In recent years, researchers and practitioners in the behavioral sciences have profited from a growing literature on delay discounting. The purpose of this article is to provide readers with a brief tutorial on how to use Microsoft Office Excel 2010 and Excel for Mac 2011 to analyze discounting data to yield parameters for both the hyperbolic discounting model and area under the curve. This tutorial is intended to encourage the quantitative analysis of behavior in both research and applied settings by readers with relatively little formal training in nonlinear regression.

A TUTORIAL ON THE USE OF EXCEL 2010 AND EXCEL FOR MAC 2011 FOR CONDUCTING DELAY-DISCOUNTING ANALYSES

PubMed Central

Reed, Derek D; Kaplan, Brent A; Brewer, Adam T

2012-01-01

In recent years, researchers and practitioners in the behavioral sciences have profited from a growing literature on delay discounting. The purpose of this article is to provide readers with a brief tutorial on how to use Microsoft Office Excel 2010 and Excel for Mac 2011 to analyze discounting data to yield parameters for both the hyperbolic discounting model and area under the curve. This tutorial is intended to encourage the quantitative analysis of behavior in both research and applied settings by readers with relatively little formal training in nonlinear regression. PMID:22844143

Automating Phase Change Lines and Their Labels Using Microsoft Excel(R).

PubMed

Deochand, Neil

2017-09-01

Many researchers have rallied against drawn in graphical elements and offered ways to avoid them, especially regarding the insertion of phase change lines (Deochand, Costello, & Fuqua, 2015; Dubuque, 2015; Vanselow & Bourret, 2012). However, few have offered a solution to automating the phase labels, which are often utilized in behavior analytic graphical displays (Deochand et al., 2015). Despite the fact that Microsoft Excel® is extensively utilized by behavior analysts, solutions to resolve issues in our graphing practices are not always apparent or user-friendly. Considering the insertion of phase change lines and their labels constitute a repetitious and laborious endeavor, any minimization in the steps to accomplish these graphical elements could offer substantial time-savings to the field. The purpose of this report is to provide an updated way (and templates in the supplemental materials) to add phase change lines with their respective labels, which stay embedded to the graph when they are moved or updated.

Equilibrium expert: an add-in to Microsoft Excel for multiple binding equilibrium simulations and parameter estimations.

PubMed

Raguin, Olivier; Gruaz-Guyon, Anne; Barbet, Jacques

2002-11-01

An add-in to Microsoft Excel was developed to simulate multiple binding equilibriums. A partition function, readily written even when the equilibrium is complex, describes the experimental system. It involves the concentrations of the different free molecular species and of the different complexes present in the experiment. As a result, the software is not restricted to a series of predefined experimental setups but can handle a large variety of problems involving up to nine independent molecular species. Binding parameters are estimated by nonlinear least-square fitting of experimental measurements as supplied by the user. The fitting process allows user-defined weighting of the experimental data. The flexibility of the software and the way it may be used to describe common experimental situations and to deal with usual problems such as tracer reactivity or nonspecific binding is demonstrated by a few examples. The software is available free of charge upon request.

Performance (Off-Design) Cycle Analysis for a Turbofan Engine With Interstage Turbine Burner

NASA Technical Reports Server (NTRS)

Liew, K. H.; Urip, E.; Yang, S. L.; Mattingly, J. D.; Marek, C. J.

2005-01-01

This report presents the performance of a steady-state, dual-spool, separate-exhaust turbofan engine, with an interstage turbine burner (ITB) serving as a secondary combustor. The ITB, which is located in the transition duct between the high- and the low-pressure turbines, is a relatively new concept for increasing specific thrust and lowering pollutant emissions in modern jet-engine propulsion. A detailed off-design performance analysis of ITB engines is written in Microsoft(Registered Trademark) Excel (Redmond, Washington) macrocode with Visual Basic Application to calculate engine performances over the entire operating envelope. Several design-point engine cases are pre-selected using a parametric cycle-analysis code developed previously in Microsoft(Registered Trademark) Excel, for off-design analysis. The off-design code calculates engine performances (i.e. thrust and thrust-specific-fuel-consumption) at various flight conditions and throttle settings.

CO2calc: A User-Friendly Seawater Carbon Calculator for Windows, Mac OS X, and iOS (iPhone)

USGS Publications Warehouse

Robbins, L.L.; Hansen, M.E.; Kleypas, J.A.; Meylan, S.C.

2010-01-01

A user-friendly, stand-alone application for the calculation of carbonate system parameters was developed by the U.S. Geological Survey Florida Shelf Ecosystems Response to Climate Change Project in response to its Ocean Acidification Task. The application, by Mark Hansen and Lisa Robbins, USGS St. Petersburg, FL, Joanie Kleypas, NCAR, Boulder, CO, and Stephan Meylan, Jacobs Technology, St. Petersburg, FL, is intended as a follow-on to CO2SYS, originally developed by Lewis and Wallace (1998) and later modified for Microsoft Excel? by Denis Pierrot (Pierrot and others, 2006). Besides eliminating the need for using Microsoft Excel on the host system, CO2calc offers several improvements on CO2SYS, including: An improved graphical user interface for data entry and results Additional calculations of air-sea CO2 fluxes (for surface water calculations) The ability to tag data with sample name, comments, date, time, and latitude/longitude The ability to use the system time and date and latitude/ longitude (automatic retrieval of latitude and longitude available on iPhone? 3, 3GS, 4, and Windows? hosts with an attached National Marine Electronics Association (NMEA)-enabled GPS) The ability to process multiple files in a batch processing mode An option to save sample information, data input, and calculated results as a comma-separated value (CSV) file for use with Microsoft Excel, ArcGIS,? or other applications An option to export points with geographic coordinates as a KMZ file for viewing and editing in Google EarthTM

Statistical Power Analysis with Microsoft Excel: Normal Tests for One or Two Means as a Prelude to Using Non-Central Distributions to Calculate Power

ERIC Educational Resources Information Center

Texeira, Antonio; Rosa, Alvaro; Calapez, Teresa

2009-01-01

This article presents statistical power analysis (SPA) based on the normal distribution using Excel, adopting textbook and SPA approaches. The objective is to present the latter in a comparative way within a framework that is familiar to textbook level readers, as a first step to understand SPA with other distributions. The analysis focuses on the…

Quantitative thermodynamic predication of interactions between nucleic acid and non-nucleic acid species using Microsoft excel.

PubMed

Zou, Jiaqi; Li, Na

2013-09-01

Proper design of nucleic acid sequences is crucial for many applications. We have previously established a thermodynamics-based quantitative model to help design aptamer-based nucleic acid probes by predicting equilibrium concentrations of all interacting species. To facilitate customization of this thermodynamic model for different applications, here we present a generic and easy-to-use platform to implement the algorithm of the model with Microsoft(®) Excel formulas and VBA (Visual Basic for Applications) macros. Two Excel spreadsheets have been developed: one for the applications involving only nucleic acid species, the other for the applications involving both nucleic acid and non-nucleic acid species. The spreadsheets take the nucleic acid sequences and the initial concentrations of all species as input, guide the user to retrieve the necessary thermodynamic constants, and finally calculate equilibrium concentrations for all species in various bound and unbound conformations. The validity of both spreadsheets has been verified by comparing the modeling results with the experimental results on nucleic acid sequences reported in the literature. This Excel-based platform described here will allow biomedical researchers to rationalize the sequence design of nucleic acid probes using the thermodynamics-based modeling even without relevant theoretical and computational skills. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

The Humble Pie--Half-Baked or Well Done?

ERIC Educational Resources Information Center

Hunt, Neville; Mashhoudy, Houshang

2008-01-01

This article re-examines the much maligned piechart and provides justification for its use. It identifies common pitfalls when drawing piecharts in Microsoft Excel and offers advice on how to avoid them. (Contains 6 figures and 5 tables.)

77 FR 73969 - International Fisheries; Pacific Tuna Fisheries; Fishing Restrictions in the Eastern Pacific Ocean

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-12

... comments will only be accepted in Microsoft Word or Excel, WordPerfect, or Adobe PDF file formats. Written... membership includes: Belize, Canada, China, Chinese Taipei (Taiwan), Colombia, Costa Rica, Ecuador, El...

Publications - RDF 2015-3 | Alaska Division of Geological & Geophysical

Science.gov Websites

Surveys Home About Us Director's Office Alaska Statutes Annual Reports Employment Staff Directory Microsoft Excel 358.0 K Metadata - Read me Keywords 40Ar/39Ar; Age Dates; Ar-Ar; Bendeleben Mountains; Big

VISION User Guide - VISION (Verifiable Fuel Cycle Simulation) Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacob J. Jacobson; Robert F. Jeffers; Gretchen E. Matthern

2009-08-01

The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R&D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating “what if” scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level for U.S. nuclear power. The model is not intendedmore » as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., “reactor types” not individual reactors and “separation types” not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation of disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. Note that recovered uranium is itself often partitioned: some RU flows with recycled transuranic elements, some flows with wastes, and the rest is designated RU. RU comes out of storage if needed to correct the U/TRU ratio in new recycled fuel. Neither RU nor DU are designated as wastes. VISION is comprised of several Microsoft Excel input files, a Powersim Studio core, and several Microsoft Excel output files. All must be co-located in the same folder on a PC to function. We use Microsoft Excel 2003 and have not tested VISION with Microsoft Excel 2007. The VISION team uses both Powersim Studio 2005 and 2009 and it should work with either.« less

WASP (Write a Scientific Paper) using Excel - 7: The t-distribution.

PubMed

Grech, Victor

2018-03-01

The calculation of descriptive statistics after data collection provides researchers with an overview of the shape and nature of their datasets, along with basic descriptors, and may help identify true or incorrect outlier values. This exercise should always precede inferential statistics, when possible. This paper provides some pointers for doing so in Microsoft Excel, both statically and dynamically, with Excel's functions, including the calculation of standard deviation and variance and the relevance of the t-distribution. Copyright © 2018 Elsevier B.V. All rights reserved.

Spreadsheet macros for coloring sequence alignments.

PubMed

Haygood, M G

1993-12-01

This article describes a set of Microsoft Excel macros designed to color amino acid and nucleotide sequence alignments for review and preparation of visual aids. The colored alignments can then be modified to emphasize features of interest. Procedures for importing and coloring sequences are described. The macro file adds a new menu to the menu bar containing sequence-related commands to enable users unfamiliar with Excel to use the macros more readily. The macros were designed for use with Macintosh computers but will also run with the DOS version of Excel.

An Introduction to Simulated Annealing

ERIC Educational Resources Information Center

Albright, Brian

2007-01-01

An attempt to model the physical process of annealing lead to the development of a type of combinatorial optimization algorithm that takes on the problem of getting trapped in a local minimum. The author presents a Microsoft Excel spreadsheet that illustrates how this works.

Validity of Students Worksheet Based Problem-Based Learning for 9th Grade Junior High School in living organism Inheritance and Food Biotechnology.

NASA Astrophysics Data System (ADS)

Jefriadi, J.; Ahda, Y.; Sumarmin, R.

2018-04-01

Based on preliminary research of students worksheet used by teachers has several disadvantages such as students worksheet arranged directly drove learners conduct an investigation without preceded by directing learners to a problem or provide stimulation, student's worksheet not provide a concrete imageand presentation activities on the students worksheet not refer to any one learning models curicullum recommended. To address problems Reviews these students then developed a worksheet based on problem-based learning. This is a research development that using Ploom models. The phases are preliminary research, development and assessment. The instruments used in data collection that includes pieces of observation/interviews, instrument self-evaluation, instruments validity. The results of the validation expert on student worksheets get a valid result the average value 80,1%. Validity of students worksheet based problem-based learning for 9th grade junior high school in living organism inheritance and food biotechnology get valid category.

Dimeric spectra analysis in Microsoft Excel: a comparative study.

PubMed

Gilani, A Ghanadzadeh; Moghadam, M; Zakerhamidi, M S

2011-11-01

The purpose of this work is to introduce the reader to an Add-in implementation, Decom. This implementation provides the whole processing requirements for analysis of dimeric spectra. General linear and nonlinear decomposition algorithms were integrated as an Excel Add-in for easy installation and usage. In this work, the results of several samples investigations were compared to those obtained by Datan. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Matlab-Excel Interface for OpenDSS

DOE Office of Scientific and Technical Information (OSTI.GOV)

The software allows users of the OpenDSS grid modeling software to access their load flow models using a GUI interface developed in MATLAB. The circuit definitions are entered into a Microsoft Excel spreadsheet which makes circuit creation and editing a much simpler process than the basic text-based editors used in the native OpenDSS interface. Plot tools have been developed which can be accessed through a MATLAB GUI once the desired parameters have been simulated.

Research Based Astronomy in the Secondary Classroom: Lessons Developed for Investigating YSOs using APT, Excel, and MOPEX

NASA Astrophysics Data System (ADS)

Guastella, Peter; Rebull, L.; DeWolf, C.; Johnson, C. H.; McDonald, D. W.; Schaefers, J.; Spuck, T.

2009-01-01

We present several learning activities that were performed to explore YSOs within LDN 425 and 981. Classroom instruction on the characteristics of YSOs were supplemented with hands-on learning of software needed to search Spitzer mosaics for YSO candidates. Structured activities were used to teach the intricacies of MOPEX, ATP and Excel. Excel worksheets were developed to help students convert flux densities into magnitudes. These magnitudes were then used to create Spectral Energy Distributions, (SED) plotting the energy against the wavelength of each candidate YSO. This research was made possible through the Spitzer Space Telescope Research Program for Teachers and Students and was funded by the Spitzer Science Center (SSC) and the National Optical Astronomy Observatory (NOAO). Please see our companion education poster by McDonald, et al. titled "Spitzer - Hot and Colorful Student Activities" and our research poster by Johnson et al. entitled "Star Formation in Lynds Dark Nebulae."

BIOCHLOR: NATURAL ATTENUATION DECISION SUPPORT SYSTEM, USER'S MANUAL, VERSION 1.0

EPA Science Inventory

BIOCHLOR is an easy-to-use screening model that simulates remediation by natural attenuation (RNA) of dissolved solvents at chlorinated solvent release sites. The software, programmed in the Microsoft Excel spreadsheet environment and based on the Domenico analytical solute tran...

Amerciamysis bahia Stochastic Matrix Population Model for Laboratory Populations

EPA Science Inventory

The population model described here is a stochastic, density-independent matrix model for integrating the effects of toxicants on survival and reproduction of the marine invertebrate, Americamysis bahia. The model was constructed using Microsoft® Excel 2003. The focus of the mode...

76 FR 39792 - Fisheries of the Exclusive Economic Zone Off Alaska; Northern Rockfish in the Bering Sea and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

.... NMFS will accept anonymous comments. Enter ``N/A'' in the required fields, if you wish to remain anonymous. Attachments to electronic comments will be accepted in Microsoft Word, Excel, WordPerfect, or...

Formulation of consumables management models. Consumables flight planning worksheet utilization

NASA Technical Reports Server (NTRS)

Newman, C. M.

1977-01-01

The updated and reformatted consumables flight planning worksheet is documented. An instruction set for applying the worksheet, and a sample application of the worksheet is disclosed. The particular application is for the STS interfacing with sortie payloads and typifies the interfacing of the delivery system and payloads.

Accounting: Teaching the Worksheet: The "What,""Why," and "How."

ERIC Educational Resources Information Center

Simpson, Kawanna J.; Musselman, Donald

1979-01-01

Techniques to enable accounting teachers to present the accounting worksheet are given, with examples of worksheet columns for income statement, balance sheet, revenue and expense, owner's equity, trial balance, and adjustments. The techniques also show the student the reasons (why) for and the mechanics (how) of the worksheet. (MF)

The efficacy of the Microsoft KinectTM to assess human bimanual coordination.

PubMed

Liddy, Joshua J; Zelaznik, Howard N; Huber, Jessica E; Rietdyk, Shirley; Claxton, Laura J; Samuel, Arjmand; Haddad, Jeffrey M

2017-06-01

The Microsoft Kinect has been used in studies examining posture and gait. Despite the advantages of portability and low cost, this device has not been used to assess interlimb coordination. Fundamental insights into movement control, variability, health, and functional status can be gained by examining coordination patterns. In this study, we investigated the efficacy of the Microsoft Kinect to capture bimanual coordination relative to a research-grade motion capture system. Twenty-four healthy adults performed coordinated hand movements in two patterns (in-phase and antiphase) at eight movement frequencies (1.00-3.33 Hz). Continuous relative phase (CRP) and discrete relative phase (DRP) were used to quantify the means (mCRP and mDRP) and variability (sdCRP and sdDRP) of coordination patterns. Between-device agreement was assessed using Bland-Altman bias with 95 % limits of agreement, concordance correlation coefficients (absolute agreement), and Pearson correlation coefficients (relative agreement). Modest-to-excellent relative and absolute agreements were found for mCRP in all conditions. However, mDRP showed poor agreement for the in-phase pattern at low frequencies, due to large between-device differences in a subset of participants. By contrast, poor absolute agreement was observed for both sdCRP and sdDRP, while relative agreement ranged from poor to excellent. Overall, the Kinect captures the macroscopic patterns of bimanual coordination better than coordination variability.

Electronic Attack Platform Placement Optimization

DTIC Science & Technology

2014-09-01

Processing in VBA ...............................................................33 2. Client-Server Using Two Different Excel Application...6 Figure 3. Screenshot of the VBA IDE contained within all Microsoft Office products...application using MS Excel’s Applicatin.OnTime method. .....................................33 Figure 20. WINSOCK API Functions needed to use TCP via VBA

Macros for Educational Research.

ERIC Educational Resources Information Center

Woodrow, Janice E. J.

1988-01-01

Describes the design and operation of two macros written in the programming language of Microsoft's EXCEL for educational research applications. The first macro determines the frequency of responses to a Likert-type questionnaire or multiple-choice test; the second performs a one-way analysis of variance test. (Author/LRW)

LANDFILL GAS EMISSIONS MODEL (LANDGEM) VERSION 3.02 USER'S GUIDE

EPA Science Inventory

The Landfill Gas Emissions Model (LandGEM) is an automated estimation tool with a Microsoft Excel interface that can be used to estimate emission rates for total landfill gas, methane, carbon dioxide, nonmethane organic compounds, and individual air pollutants from municipal soli...

Analyzing Subsidies in Microsoft Excel

ERIC Educational Resources Information Center

Mixon, J. Wilson, Jr.

2005-01-01

Applying the budget line/indifference curve apparatus to policy issues reveals important and sometimes counterintuitive policy implications. Also, it provides practice in using the apparatus. The author applies these tools to subsidies. The analysis follows textbook treatments but is extended at some points. In particular, the present analysis…

A step-by-step guide to non-linear regression analysis of experimental data using a Microsoft Excel spreadsheet.

PubMed

Brown, A M

2001-06-01

The objective of this present study was to introduce a simple, easily understood method for carrying out non-linear regression analysis based on user input functions. While it is relatively straightforward to fit data with simple functions such as linear or logarithmic functions, fitting data with more complicated non-linear functions is more difficult. Commercial specialist programmes are available that will carry out this analysis, but these programmes are expensive and are not intuitive to learn. An alternative method described here is to use the SOLVER function of the ubiquitous spreadsheet programme Microsoft Excel, which employs an iterative least squares fitting routine to produce the optimal goodness of fit between data and function. The intent of this paper is to lead the reader through an easily understood step-by-step guide to implementing this method, which can be applied to any function in the form y=f(x), and is well suited to fast, reliable analysis of data in all fields of biology.

A non-linear regression analysis program for describing electrophysiological data with multiple functions using Microsoft Excel.

PubMed

Brown, Angus M

2006-04-01

The objective of this present study was to demonstrate a method for fitting complex electrophysiological data with multiple functions using the SOLVER add-in of the ubiquitous spreadsheet Microsoft Excel. SOLVER minimizes the difference between the sum of the squares of the data to be fit and the function(s) describing the data using an iterative generalized reduced gradient method. While it is a straightforward procedure to fit data with linear functions, and we have previously demonstrated a method of non-linear regression analysis of experimental data based upon a single function, it is more complex to fit data with multiple functions, usually requiring specialized expensive computer software. In this paper we describe an easily understood program for fitting experimentally acquired data, in this case the stimulus-evoked compound action potential from the mouse optic nerve, with multiple Gaussian functions. The program is flexible and can be applied to describe data with a wide variety of user-input functions.

Utilization of integrated Michaelis-Menten equations for enzyme inhibition diagnosis and determination of kinetic constants using Solver supplement of Microsoft Office Excel.

PubMed

Bezerra, Rui M F; Fraga, Irene; Dias, Albino A

2013-01-01

Enzyme kinetic parameters are usually determined from initial rates nevertheless, laboratory instruments only measure substrate or product concentration versus reaction time (progress curves). To overcome this problem we present a methodology which uses integrated models based on Michaelis-Menten equation. The most severe practical limitation of progress curve analysis occurs when the enzyme shows a loss of activity under the chosen assay conditions. To avoid this problem it is possible to work with the same experimental points utilized for initial rates determination. This methodology is illustrated by the use of integrated kinetic equations with the well-known reaction catalyzed by alkaline phosphatase enzyme. In this work nonlinear regression was performed with the Solver supplement (Microsoft Office Excel). It is easy to work with and track graphically the convergence of SSE (sum of square errors). The diagnosis of enzyme inhibition was performed according to Akaike information criterion. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

USING MICROSOFT OFFICE EXCEL® 2007 TO CONDUCT GENERALIZED MATCHING ANALYSES

PubMed Central

Reed, Derek D

2009-01-01

The generalized matching equation is a robust and empirically supported means of analyzing relations between reinforcement and behavior. Unfortunately, no simple task analysis is available to behavior analysts interested in using the matching equation to evaluate data in clinical or applied settings. This technical article presents a task analysis for the use of Microsoft Excel to analyze and plot the generalized matching equation. Using a data-based case example and a step-by-step guide for completing the analysis, these instructions are intended to promote the use of quantitative analyses by researchers with little to no experience in quantitative analyses or the matching law. PMID:20514196

Accounting Clerk Guide, Exercise and Worksheet Packet--Part I.

ERIC Educational Resources Information Center

Foster, Brian; And Others

The exercise and worksheet packet is part of an eight volume unit for grades 10, 11, and 12, designed for individualized progression in preparing students for entry into the occupation of accounting clerk. The exercise and worksheet packet contains a copy of every worksheet in the learner packet for lessons 1 through 11 so that the instructor can…

Technology Is the Answer, But What Was the Question? Audiotape vs. Videotape for Individualized Instruction.

ERIC Educational Resources Information Center

Tabachnick, Barbara Gerson; And Others

1978-01-01

In an evaluation of supplementary learning aids students were assigned to one of four learning conditions: (1) videotape plus worksheet, (2) audiotape plus worksheet, (3) combination of audio- and videotape plus worksheet, and (4) worksheet only. Results reported include test scores and ratings of helpfulness, as well as student preferences and…

The Effectiveness of Geography Student Worksheet to Develop Learning Experiences for High School Students

ERIC Educational Resources Information Center

Utami, Wiwik Sri; Sumarmi; Ruja, I. Nyoman; Utaya, Sugeng

2016-01-01

The purpose of this study is to examine the effectiveness of geography student worksheet in developing high school students' learning experiences. The student worksheet was planned to gain opportunity to develop creative and geography skills. The effectiveness is assessed from the contribution of the worksheets in improving the skills of…

Cloud Computing Based E-Learning System

ERIC Educational Resources Information Center

Al-Zoube, Mohammed; El-Seoud, Samir Abou; Wyne, Mudasser F.

2010-01-01

Cloud computing technologies although in their early stages, have managed to change the way applications are going to be developed and accessed. These technologies are aimed at running applications as services over the internet on a flexible infrastructure. Microsoft office applications, such as word processing, excel spreadsheet, access database…

Buffer$--An Economic Analysis Tool

Treesearch

Gary Bentrup

2007-01-01

Buffer$ is an economic spreadsheet tool for analyzing the cost-benefits of conservation buffers by resource professionals. Conservation buffers are linear strips of vegetation managed for multiple landowner and societal objectives. The Microsoft Excel based spreadsheet can calculate potential income derived from a buffer, including income from cost-share/incentive...

How to Create Automatically Graded Spreadsheets for Statistics Courses

ERIC Educational Resources Information Center

LoSchiavo, Frank M.

2016-01-01

Instructors often use spreadsheet software (e.g., Microsoft Excel) in their statistics courses so that students can gain experience conducting computerized analyses. Unfortunately, students tend to make several predictable errors when programming spreadsheets. Without immediate feedback, programming errors are likely to go undetected, and as a…

Analog Spectrophotometers in the Digital Age: Data Acquisition on a Budget

ERIC Educational Resources Information Center

Nazarenko, Alexander Y.; Nazarenko, Natalie A.

2005-01-01

The interfacing of various spectrometers with analog output to a personal computer running Microsoft Excel in the Windows environment is described. This low cost data acquisition solution is a useful replacement of a chart recorder for various UV-visible and infrared scanning spectrophotometers.

76 FR 9210 - Draft DOC National Aquaculture Policy

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-16

... confidential business information or otherwise sensitive or protected information. All comments and attachments... and NOAA's Online Privacy Policy, we treat your name, city, state, and any comments you provide as... accusations. You may submit attachments to electronic comments in Microsoft Word, Excel, WordPerfect, or Adobe...

Improving the Design of Laboratory Worksheets.

ERIC Educational Resources Information Center

McDowell, E. T.; Wadding, R. E. L.

1985-01-01

Describes a technique to improve the adaptation, development, and utilization of laboratory worksheets. Two sample worksheets (on decomposition of ethanol and on solubility of potassium chloride) are included. (JN)

Global History. A Curriculum Guide. Second Semester. Theme III: The Emergence of the Modern World. Student Worksheets. Experimental Edition.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

This bulletin of student worksheets complements teacher strategies for Theme III entitled, "Changes in Thought and Action Led to the Emergence of the Modern World." The worksheets contain materials corresponding to specific strategies, and the questions which accompany each worksheet are included on the appropriate strategy page. Included are…

Effectiveness of students worksheet based on mastery learning in genetics subject

NASA Astrophysics Data System (ADS)

Megahati, R. R. P.; Yanti, F.; Susanti, D.

2018-05-01

Genetics is one of the subjects that must be followed by students in Biology education department. Generally, students do not like the genetics subject because of genetics concepts difficult to understand and the unavailability of a practical students worksheet. Consequently, the complete learning process (mastery learning) is not fulfilled and low students learning outcomes. The aim of this study develops student worksheet based on mastery learning that practical in genetics subject. This research is a research and development using 4-D models. The data analysis technique used is the descriptive analysis that describes the results of the practicalities of students worksheets based on mastery learning by students and lecturer of the genetic subject. The result is the student worksheet based on mastery learning on genetics subject are to the criteria of 80,33% and 80,14%, which means that the students worksheet practical used by lecturer and students. Student’s worksheet based on mastery learning effective because it can increase the activity and student learning outcomes.

Stakeholder Analysis Worksheet

EPA Pesticide Factsheets

Stakeholder Analysis WorksheetA worksheet that can be used to document potential stakeholder groups, the information or expertise they hold, the role that they can play, their interests or concerns about the HIA

Determination of Minimised Kt Values and Boundary Shapes for a Class of Quasi-Rectangular Holes in Infinite Plates

DTIC Science & Technology

2015-07-01

COMPUTING SHAPES AND STRESS DISTRIBUTIONS FOR QUASI-RECTANGULAR HOLES USING EXCEL VBA .......... 35 APPENDIX B: LISTING OF FADD2D INPUT DECK FOR STRESS...from which Kt values may be readily calculated, have been implemented in a Microsoft Excel spreadsheet using the Visual Basic for Applications ( VBA ...Professor Mark E Mear, University of Texas at Austin, and Professor James C Newman Jr, Mississippi State University, for providing access to the

WASP (Write a Scientific Paper) using Excel - 4: Histograms.

PubMed

Grech, Victor

2018-02-01

Plotting data into graphs is a crucial step in data analysis as part of an initial descriptive statistics exercise since it gives the researcher an overview of the shape and nature of the data. Outlier values may also be identified, and these may be incorrect data, or true and important outliers. This paper explains how to access Microsoft Excel's Analysis Toolpak and provides some pointers for the utilisation of the histogram tool within the Toolpak. Copyright © 2018. Published by Elsevier B.V.

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel II. Distribution functions and moments.

PubMed

Langenbucher, Frieder

2003-01-01

MS Excel is a useful tool to handle in vitro/in vivo correlation (IVIVC) distribution functions, with emphasis on the Weibull and the biexponential distribution, which are most useful for the presentation of cumulative profiles, e.g. release in vitro or urinary excretion in vivo, and differential profiles such as the plasma response in vivo. The discussion includes moments (AUC and mean) as summarizing statistics, and data-fitting algorithms for parameter estimation.

Developing Large-Scale Bayesian Networks by Composition: Fault Diagnosis of Electrical Power Systems in Aircraft and Spacecraft

NASA Technical Reports Server (NTRS)

Mengshoel, Ole Jakob; Poll, Scott; Kurtoglu, Tolga

2009-01-01

This CD contains files that support the talk (see CASI ID 20100021404). There are 24 models that relate to the ADAPT system and 1 Excel worksheet. In the paper an investigation into the use of Bayesian networks to construct large-scale diagnostic systems is described. The high-level specifications, Bayesian networks, clique trees, and arithmetic circuits representing 24 different electrical power systems are described in the talk. The data in the CD are the models of the 24 different power systems.

OP-Yield Version 1.00 user's guide

Treesearch

Martin W. Ritchie; Jianwei Zhang

2018-01-01

OP-Yield is a Microsoft Excel™ spreadsheet with 14 specified user inputs to derive custom yield estimates using the original Oliver and Powers (1978) functions as the foundation. It presents yields for ponderosa pine (Pinus ponderosa Lawson & C. Lawson) plantations in northern California. The basic model forms for dominantand...

46 CFR 535.701 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., Washington, DC 20573-0001. A copy of the Monitoring Report form in Microsoft Word and Excel format may be... Monitoring Reports in the Commission's prescribed electronic format, either on diskette or CD-ROM. (e)(1) The... filed by this subpart may be filed by direct electronic transmission in lieu of hard copy. Detailed...

What Spreadsheet and Database Skills Do Business Students Need?

ERIC Educational Resources Information Center

Coleman, Phillip D.; Blankenship, Ray J.

2017-01-01

The Principles of Information Systems course taught at a medium-sized Midwest University consists of Information Systems conceptual material plus Microsoft Excel and Access skills that the Information Systems faculty feel are most important to business students from all business disciplines. These skills range from using basic mathematic functions…

WASP (Write a Scientific Paper) using Excel - 6: Standard error and confidence interval.

PubMed

Grech, Victor

2018-03-01

The calculation of descriptive statistics includes the calculation of standard error and confidence interval, an inevitable component of data analysis in inferential statistics. This paper provides pointers as to how to do this in Microsoft Excel™. Copyright © 2018 Elsevier B.V. All rights reserved.

Technology Tips: Fool Me Twice, Shame on Me

ERIC Educational Resources Information Center

Stohl, Hollylynne; Harper, Suzanne R.

2005-01-01

Todd Lee and colleagues share some of the common technology "pranks" and peculiarities from the three most common technology tools used in our classrooms: Microsoft Excel, graphing calculators, and The Geometer's Sketchpad. The "Surfing Note" includes a link to a collection of funny math cartoons from the Carolina Biological Supply Company.

Who Will Win?: Predicting the Presidential Election Using Linear Regression

ERIC Educational Resources Information Center

Lamb, John H.

2007-01-01

This article outlines a linear regression activity that engages learners, uses technology, and fosters cooperation. Students generated least-squares linear regression equations using TI-83 Plus[TM] graphing calculators, Microsoft[C] Excel, and paper-and-pencil calculations using derived normal equations to predict the 2004 presidential election.…

Interactive Spreadsheets in JCE Webware

ERIC Educational Resources Information Center

Coleman, William F.; Fedosky, Edward W.

2005-01-01

A description of the Microsoft Excel spreadsheet simulation, Anharmonicity.xls that can be used to smoothly and continuously switch a plotted function and its quadratic approximation is presented. It can be used in a classroom demonstration or incorporated into a student-centered computer-laboratory exercise to examine the qualitative behavior of…

The computerized OMAHA system in microsoft office excel.

PubMed

Lai, Xiaobin; Wong, Frances K Y; Zhang, Peiqiang; Leung, Carenx W Y; Lee, Lai H; Wong, Jessica S Y; Lo, Yim F; Ching, Shirley S Y

2014-01-01

The OMAHA System was adopted as the documentation system in an interventional study. To systematically record client care and facilitate data analysis, two Office Excel files were developed. The first Excel file (File A) was designed to record problems, care procedure, and outcomes for individual clients according to the OMAHA System. It was used by the intervention nurses in the study. The second Excel file (File B) was the summary of all clients that had been automatically extracted from File A. Data in File B can be analyzed directly in Excel or imported in PASW for further analysis. Both files have four parts to record basic information and the three parts of the OMAHA System. The computerized OMAHA System simplified the documentation procedure and facilitated the management and analysis of data.

Laboratory Activity Worksheet to Train High Order Thinking Skill of Student on Surface Chemistry Lecture

NASA Astrophysics Data System (ADS)

Yonata, B.; Nasrudin, H.

2018-01-01

A worksheet has to be a set with activity which is help students to arrange their own experiments. For this reason, this research is focused on how to train students’ higher order thinking skills in laboratory activity by developing laboratory activity worksheet on surface chemistry lecture. To ensure that the laboratory activity worksheet already contains aspects of the higher order thinking skill, it requires theoretical and empirical validation. From the data analysis results, it shows that the developed worksheet worth to use. The worksheet is worthy of theoretical and empirical feasibility. This conclusion is based on the findings: 1) Assessment from the validators about the theoretical feasibility aspects in the category is very feasible with an assessment range of 95.24% to 97.92%. 2) students’ higher thinking skill from N Gain values ranges from 0.50 (enough) to 1.00 (high) so it can be concluded that the laboratory activity worksheet on surface chemistry lecture is empirical in terms of worth. The empirical feasibility is supported by the responses of the students in very reasonable categories. It is expected that the laboratory activity worksheet on surface chemistry lecture can train students’ high order thinking skills for students who program surface chemistry lecture.

Problem-Based Learning Model Used to Scientific Approach Based Worksheet for Physics to Develop Senior High School Students Characters

NASA Astrophysics Data System (ADS)

Yulianti, D.

2017-04-01

The purpose of this study is to explore the application of Problem Based Learning(PBL) model aided withscientific approach and character integrated physics worksheets (LKS). Another purpose is to investigate the increase in cognitive and psychomotor learning outcomes and to know the character development of students. The method used in this study was the quasi-experiment. The instruments were observation and cognitive test. Worksheets can improve students’ cognitive, psychomotor learning outcomes. Improvements in cognitive learning results of students who have learned using worksheets are higher than students who received learning without worksheets. LKS can also develop the students’ character.

Development of a Microsoft Excel tool for applying a factor retention criterion of a dimension coefficient to a survey on patient safety culture.

PubMed

Chien, Tsair-Wei; Shao, Yang; Jen, Dong-Hui

2017-10-27

Many quality-of-life studies have been conducted in healthcare settings, but few have used Microsoft Excel to incorporate Cronbach's α with dimension coefficient (DC) for describing a scale's characteristics. To present a computer module that can report a scale's validity, we manipulated datasets to verify a DC that can be used as a factor retention criterion for demonstrating its usefulness in a patient safety culture survey (PSC). Microsoft Excel Visual Basic for Applications was used to design a computer module for simulating 2000 datasets fitting the Rasch rating scale model. The datasets consisted of (i) five dual correlation coefficients (correl. = 0.3, 0.5, 0.7, 0.9, and 1.0) on two latent traits (i.e., true scores) following a normal distribution and responses to their respective 1/3 and 2/3 items in length; (ii) 20 scenarios of item lengths from 5 to 100; and (iii) 20 sample sizes from 50 to 1000. Each item containing 5-point polytomous responses was uniformly distributed in difficulty across a ± 2 logit range. Three methods (i.e., dimension interrelation ≥0.7, Horn's parallel analysis (PA) 95% confidence interval, and individual random eigenvalues) were used for determining one factor to retain. DC refers to the binary classification (1 as one factor and 0 as many factors) used for examining accuracy with the indicators sensitivity, specificity, and area under receiver operating characteristic curve (AUC). The scale's reliability and DC were simultaneously calculated for each simulative dataset. PSC real data were demonstrated with DC to interpret reports of the unit-based construct validity using the author-made MS Excel module. The DC method presented accurate sensitivity (=0.96), specificity (=0.92) with a DC criterion (≥0.70), and AUC (=0.98) that were higher than those of the two PA methods. PA combined with DC yielded good sensitivity (=0.96), specificity (=1.0) with a DC criterion (≥0.70), and AUC (=0.99). Advances in computer technology may enable healthcare users familiar with MS Excel to apply DC as a factor retention criterion for determining a scale's unidimensionality and evaluating a scale's quality.

Development of Guided Inquiry-Based Student Lab Worksheet on the Making of Pineapple Flavoring

NASA Astrophysics Data System (ADS)

Dwiyanti, G.; Suryatna, A.; Taibah, I.

2017-02-01

The aim of this research was to develop guided inquiry based student lab worksheet on making pineapple flavour and knowing the quality of worksheet that is being developed. Research methods that is being conducted is research and development that is limited by a preliminary studies (literature studies, field surveys, and preparation of the initial product) and development of the model (within limited testing). The results from analyze the books sources and fields survey showed that the characteristic of esterification lab worksheet that currently available still in the direct instruction form (cookbook). The optimization result of making pineapple flavour experiment that was conducted are the ethanol volume 3 mL, butyric acid volume 2 mL, sulfuric acid 5 drops, saturated NaHCO3 solution volume 9 mL, and temperature of heating was 80 °C. The characteristic of guided inquiry based student lab worksheet that was developed contained phenomenon and instructions that suitable with inquiry stages to guide the students in doing the experiment of making pineapple flavour. The evaluation of designated teachers and lecturers of the developed student worksheet were very good (96,08%). Lab-experiment feasibility achieved by using guided inquiry based student lab worksheets that is being developed based on the inquiry stages that conducted by student were found very good (97,50%) and accomplishment based on students’ answer of the tasks in the worksheet were found very good (83,84%). Students’ responses of the experiments using the developed worksheet are found very good (81,84%).

Shared Decision Making in Common Chronic Conditions: Impact of a Resident Training Workshop.

PubMed

Simmons, Leigh; Leavitt, Lauren; Ray, Alaka; Fosburgh, Blair; Sepucha, Karen

2016-01-01

Physicians must be competent in several different kinds of communication skills in order to implement shared decision making; however, these skills are not part of routine medical student education, nor are they formally taught during residency training. We developed a 1- and 2-hour workshop curriculum for internal medicine residents to promote shared decision making in treatment decisions for four common chronic conditions: diabetes, depression, hypertension, and hyperlipidemia. The workshops included a written case exercise, a short didactic presentation on shared decision-making concepts and strategies for risk communication, and two role-playing exercises focused on decision making for depression and hyperlipidemia treatment. We delivered the workshop as a required component of the resident curriculum in ambulatory medicine. To evaluate the impact of the workshop, we used written course evaluations, tracked the use of the newly introduced Decision Worksheets, and asked preceptors to perform direct observation of treatment decision conversations. Residents were involved in the development of the workshop and helped identify key content, suggested framing for difficult topics, and confirmed the need for the skills workshop. One hundred thirty internal medicine and medicine-pediatrics residents attended 8 workshops over a 4-month period. In written cases completed before the workshop, the majority of residents indicated that they would discuss medications, but few mentioned other treatment options or documented patients' goals and preferences in a sample encounter note with a patient with new depression symptoms. Overall, most participants (89.7%) rated the workshop as excellent or very good, and 93.5% said that they would change their practice based on what they learned. Decision Worksheets addressing diabetes, depression, hyperlipidemia, and hypertension were available on a primary care-focused intranet site and were downloaded almost 1,200 times in the first 8 months following the workshops. Preceptors were able to observe only one consult during which one of the four topics was discussed. Internal medicine residents had considerable gaps in shared decision-making skills as measured in a baseline written exercise. Residents provided valuable contributions to the development of a Decision Worksheet to be used at the point of care. Participants rated the skills workshop highly, though interns rated the exercise more useful than PGY-2 and PGY-3 residents did. The Decision Worksheets were accessed often following the sessions; however, observing the Decision Worksheets in use in real time was a challenge in the resident-faculty clinic. Additional studies are warranted to examine whether the workshop was successful in increasing residents' ability to implement skills in practice.

COMPUTING SI AND CCPP USING SPREADSHEET PROGRAMS

EPA Science Inventory

Lotus 1-2-3 worksheets for calculating the calcite saturation index (SI) and calcium carbonate precipitation potential of a water sample are described. A simplified worksheet illustrates the principles of the method, and a more complex worksheet suitable for modeling most potabl...

Development and operation of a quality assurance system for deviations from standard operating procedures in a clinical cell therapy laboratory.

PubMed

McKenna, D; Kadidlo, D; Sumstad, D; McCullough, J

2003-01-01

Errors and accidents, or deviations from standard operating procedures, other policy, or regulations must be documented and reviewed, with corrective actions taken to assure quality performance in a cellular therapy laboratory. Though expectations and guidance for deviation management exist, a description of the framework for the development of such a program is lacking in the literature. Here we describe our deviation management program, which uses a Microsoft Access database and Microsoft Excel to analyze deviations and notable events, facilitating quality assurance (QA) functions and ongoing process improvement. Data is stored in a Microsoft Access database with an assignment to one of six deviation type categories. Deviation events are evaluated for potential impact on patient and product, and impact scores for each are determined using a 0- 4 grading scale. An immediate investigation occurs, and corrective actions are taken to prevent future similar events from taking place. Additionally, deviation data is collectively analyzed on a quarterly basis using Microsoft Excel, to identify recurring events or developing trends. Between January 1, 2001 and December 31, 2001 over 2500 products were processed at our laboratory. During this time period, 335 deviations and notable events occurred, affecting 385 products and/or patients. Deviations within the 'technical error' category were most common (37%). Thirteen percent of deviations had a patient and/or a product impact score > or = 2, a score indicating, at a minimum, potentially affected patient outcome or moderate effect upon product quality. Real-time analysis and quarterly review of deviations using our deviation management program allows for identification and correction of deviations. Monitoring of deviation trends allows for process improvement and overall successful functioning of the QA program in the cell therapy laboratory. Our deviation management program could serve as a model for other laboratories in need of such a program.

75 FR 52921 - Fisheries in the Western Pacific; Hawaii Bottomfish and Seamount Groundfish; Management Measures...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... anonymous). Attachments to electronic comments will be accepted in Microsoft Word or Excel, WordPerfect, or Adobe PDF file formats only. Amendment 2 to the Fishery Ecosystem Plan for the Hawaiian Archipelago....gpoaccess.gov/fr . Fishing for pelagic armorhead is managed under the Fishery Ecosystem Plan for the...

77 FR 42688 - Snapper-Grouper Fishery Off the Southern Atlantic States; Snapper-Grouper Management Measures

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... proposed rule to implement a regulatory amendment (Regulatory Amendment 12) to the Fishery Management Plan... can also attach additional files (up to 10MB) in Microsoft Word, Excel, WordPerfect, or Adobe PDF file... benefit to the nation, particularly with respect to providing food production and recreational...

Community Solar Scenario Tool | Integrated Energy Solutions | NREL

Science.gov Websites

Community Solar Scenario Tool Community Solar Scenario Tool The Community Solar Scenario Tool (CSST ) provides a "first cut" analysis of different community or shared solar program options. NREL sponsoring utility. Community Solar Scenario Tool -Beta Version Available as a Microsoft Excel file, which

Collection Analysis: Powerful Ways To Collect, Analyze, and Present Your Data.

ERIC Educational Resources Information Center

Hart, Amy

2003-01-01

Discussion of collection analysis in school libraries focuses on the kinds of data used and how to use library automation software to collect the data. Describes the use of Microsoft Excel and its chart-making capabilities to enhance the presentation of the analysis and suggests ways to use collection analysis output. (LRW)

Working Together: Google Apps Goes to School

ERIC Educational Resources Information Center

Oishi, Lindsay

2007-01-01

Online collaboration and project-management tools allow people to work together without being in the same place at the same time. However, that is not all, Google Docs & Spreadsheets, for example, allows the creation of documents and spreadsheets just like in Microsoft Word and Excel, but with more collaborative capacity. Google Calendar lets…

Using Microsoft Excel[R] to Calculate Descriptive Statistics and Create Graphs

ERIC Educational Resources Information Center

Carr, Nathan T.

2008-01-01

Descriptive statistics and appropriate visual representations of scores are important for all test developers, whether they are experienced testers working on large-scale projects, or novices working on small-scale local tests. Many teachers put in charge of testing projects do not know "why" they are important, however, and are utterly convinced…

Using Animated Agents in Learner-Controlled Training: The Effects of Design Control

ERIC Educational Resources Information Center

Behrend, Tara S.; Thompson, Lori Foster

2012-01-01

Animated agents have the potential to increase engagement and learning during online training by acting as personalized tutors. However, little is known about the conditions that make these agents most effective. In this study, 183 e-learners completed a Microsoft Excel training course. Approximately half were assigned an agent with predetermined…

Generating Variable and Random Schedules of Reinforcement Using Microsoft Excel Macros

ERIC Educational Resources Information Center

Bancroft, Stacie L.; Bourret, Jason C.

2008-01-01

Variable reinforcement schedules are used to arrange the availability of reinforcement following varying response ratios or intervals of time. Random reinforcement schedules are subtypes of variable reinforcement schedules that can be used to arrange the availability of reinforcement at a constant probability across number of responses or time.…

Probability & Perception: The Representativeness Heuristic in Action

ERIC Educational Resources Information Center

Lu, Yun; Vasko, Francis J.; Drummond, Trevor J.; Vasko, Lisa E.

2014-01-01

If the prospective students of probability lack a background in mathematical proofs, hands-on classroom activities may work well to help them to learn to analyze problems correctly. For example, students may physically roll a die twice to count and compare the frequency of the sequences. Tools such as graphing calculators or Microsoft Excel®…

A Simple and Convenient Method of Multiple Linear Regression to Calculate Iodine Molecular Constants

ERIC Educational Resources Information Center

Cooper, Paul D.

2010-01-01

A new procedure using a student-friendly least-squares multiple linear-regression technique utilizing a function within Microsoft Excel is described that enables students to calculate molecular constants from the vibronic spectrum of iodine. This method is advantageous pedagogically as it calculates molecular constants for ground and excited…

76 FR 13887 - Fisheries of the Northeastern United States; Atlantic Mackerel, Squid, and Butterfish (MSB...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-15

... comments in Microsoft Word, Excel, WordPerfect, or Adobe PDF file formats only. FOR FURTHER INFORMATION... butterfish stock was overfished. The Mid-Atlantic Fishery Management Council (Council) developed Amendment 10 to the FMP in response to SAW 38; Amendment 10 enacted a rebuilding program for butterfish, as well...

Tool to Prioritize Energy Efficiency Investments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farese, P.; Gelman, R.; Hendron, R.

2012-08-01

To provide analytic support of the U.S. Department of Energy's Office of the Building Technology Program (BTP), NREL developed a Microsoft Excel-based tool to provide an open and objective comparison of the hundreds of investment opportunities available to BTP. This tool uses established methodologies to evaluate the energy savings and cost of those savings.

Simplified Application of Material Efficiency Green Metrics to Synthesis Plans: Pedagogical Case Studies Selected from "Organic Syntheses"

ERIC Educational Resources Information Center

Andraos, John

2015-01-01

This paper presents a simplified approach for the application of material efficiency metrics to linear and convergent synthesis plans encountered in organic synthesis courses. Computations are facilitated and automated using intuitively designed Microsoft Excel spreadsheets without invoking abstract mathematical formulas. The merits of this…

78 FR 49061 - Valuation of Federal Coal for Advance Royalty Purposes and Information Collection Applicable to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-12

... use available information technology (for example: Spreadsheet programs, i.e., Microsoft Excel, web...) 231- 3221, or by email at [email protected] . SUPPLEMENTARY INFORMATION: I. Background A. Pre... part 1218, subpart I, titled ``Federal Coal Advance Royalty.'' B. The EPAct On August 8, 2005, the...

Hands-On Learning: A Problem-Based Approach to Teaching Microsoft Excel

ERIC Educational Resources Information Center

Slayter, Erik; Higgins, Lindsey M.

2018-01-01

The development of a student's ability to make data-driven decisions has become a focus in higher education (Schield 1999; Stephenson and Caravello 2007). Data literacy, the ability to understand and use data to effectively inform decisions, is a fundamental component of information competence (Mandinach and Gummer 2013; Stephenson and Caravello,…

Preliminary Drivers Associated with Household Food Waste Generation in South Africa

ERIC Educational Resources Information Center

Ramukhwatho, Fhumulani; duPlessis, Roelien; Oelofse, Suzan

2018-01-01

This study assessed the potential drivers of household food wastage in the City of Tshwane Metropolitan Municipality. A total of 210 participants were interviewed face-to-face using structured questionnaire. The acquired data were captured in Microsoft Excel, and analyzed using the chi-square statistical test and SAS statistical software. The main…

An Innovative Spreadsheet Application to Teach Management Science Decision Criteria

ERIC Educational Resources Information Center

Hozak, Kurt

2018-01-01

This article describes a Microsoft Excel-based application that uses humorous voice synthesis and timed competition to make it more fun and engaging to learn management science decision criteria. In addition to providing immediate feedback and easily customizable tips that facilitate self-learning, the software randomly generates both the problem…

A Stream Runs through IT: Using Streaming Video to Teach Information Technology

ERIC Educational Resources Information Center

Nicholson, Jennifer; Nicholson, Darren B.

2010-01-01

Purpose: The purpose of this paper is to report student and faculty perceptions from an introductory management information systems course that uses multimedia, specifically streaming video, as a vehicle for teaching students skills in Microsoft Excel and Access. Design/methodology/approach: Student perceptions are captured via a qualitative…

A Computational Study of the Energy Dissipation Through an Acrylic Target Impacted by Various Size FSP

DTIC Science & Technology

2009-06-01

data, and then returns an array that describes the line. This function, when compared to the LOGEST statistical function of the Microsoft Excel, which...threats continues to grow, the ability to predict materials performances using advanced modeling tools increases. The current paper has demonstrated

Gaussian-Type Orbitals versus Slater-Type Orbitals: A Comparison

ERIC Educational Resources Information Center

Magalha~es, Alexandre L.

2014-01-01

The advantages of Gaussian-type orbitals (GTO) over Slater-type orbitals (STO) in quantum chemistry calculations are clarified here by means of a holistic approach. The popular Microsoft Office Excel program was used to create an interactive application with which students are able to explore the features of GTO, including automatic calculations…

ARS-Media: A spreadsheet tool for calculating media recipes based on ion-specific constraints

USDA-ARS?s Scientific Manuscript database

ARS-Media is an ion solution calculator that uses Microsoft Excel to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Thus, the recipes are generated using ...

Strengthening 4-H by Analyzing Enrollment Data

ERIC Educational Resources Information Center

Hamilton, Stephen F.; Northern, Angela; Neff, Robert

2014-01-01

The study reported here used data from the ACCESS 4-H Enrollment System to gain insight into strengthening New York State's 4-H programming. Member enrollment lists from 2009 to 2012 were analyzed using Microsoft Excel to determine trends and dropout rates. The descriptive data indicate declining 4-H enrollment in recent years and peak enrollment…

Manpower and Personnel and Logistics Analysis in the Palletized Load System (PLS)

DTIC Science & Technology

1994-10-01

models used algonthms sanctioned byE AR 570-2 and were written in Microsoft Excel version 4.0 software. HARDMAN comparative methodology (HCM) formed the...357281300) contained forty-eight vehiclks. The medium ftrck company taxing the 5 ton tractorl with in Mg7l wailer (SRC 33721LI00) cotained sixty

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wahanani, Nursinta Adi, E-mail: sintaadi@batan.go.id; Natsir, Khairina, E-mail: sintaadi@batan.go.id; Hartini, Entin, E-mail: sintaadi@batan.go.id

Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this softwaremore » 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu{sup 239} and Pu{sup 241}. Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis.« less

Numerics made easy: solving the Navier-Stokes equation for arbitrary channel cross-sections using Microsoft Excel.

PubMed

Richter, Christiane; Kotz, Frederik; Giselbrecht, Stefan; Helmer, Dorothea; Rapp, Bastian E

2016-06-01

The fluid mechanics of microfluidics is distinctively simpler than the fluid mechanics of macroscopic systems. In macroscopic systems effects such as non-laminar flow, convection, gravity etc. need to be accounted for all of which can usually be neglected in microfluidic systems. Still, there exists only a very limited selection of channel cross-sections for which the Navier-Stokes equation for pressure-driven Poiseuille flow can be solved analytically. From these equations, velocity profiles as well as flow rates can be calculated. However, whenever a cross-section is not highly symmetric (rectangular, elliptical or circular) the Navier-Stokes equation can usually not be solved analytically. In all of these cases, numerical methods are required. However, in many instances it is not necessary to turn to complex numerical solver packages for deriving, e.g., the velocity profile of a more complex microfluidic channel cross-section. In this paper, a simple spreadsheet analysis tool (here: Microsoft Excel) will be used to implement a simple numerical scheme which allows solving the Navier-Stokes equation for arbitrary channel cross-sections.

Micrometeoroid and Orbital Debris (MMOD) Shield Ballistic Limit Analysis Program

NASA Technical Reports Server (NTRS)

Ryan, Shannon

2013-01-01

This software implements penetration limit equations for common micrometeoroid and orbital debris (MMOD) shield configurations, windows, and thermal protection systems. Allowable MMOD risk is formulated in terms of the probability of penetration (PNP) of the spacecraft pressure hull. For calculating the risk, spacecraft geometry models, mission profiles, debris environment models, and penetration limit equations for installed shielding configurations are required. Risk assessment software such as NASA's BUMPERII is used to calculate mission PNP; however, they are unsuitable for use in shield design and preliminary analysis studies. The software defines a single equation for the design and performance evaluation of common MMOD shielding configurations, windows, and thermal protection systems, along with a description of their validity range and guidelines for their application. Recommendations are based on preliminary reviews of fundamental assumptions, and accuracy in predicting experimental impact test results. The software is programmed in Visual Basic for Applications for installation as a simple add-in for Microsoft Excel. The user is directed to a graphical user interface (GUI) that requires user inputs and provides solutions directly in Microsoft Excel workbooks.

Validity of the Microsoft Kinect for measurement of neck angle: comparison with electrogoniometry.

PubMed

Allahyari, Teimour; Sahraneshin Samani, Ali; Khalkhali, Hamid-Reza

2017-12-01

Considering the importance of evaluating working postures, many techniques and tools have been developed to identify and eliminate awkward postures and prevent musculoskeletal disorders (MSDs). The introduction of the Microsoft Kinect sensor, which is a low-cost, easy to set up and markerless motion capture system, offers promising possibilities for postural studies. Considering the Kinect's special ability in head-pose and facial-expression tracking and complexity of cervical spine movements, this study aimed to assess concurrent validity of the Microsoft Kinect against an electrogoniometer for neck angle measurements. A special software program was developed to calculate the neck angle based on Kinect skeleton tracking data. Neck angles were measured simultaneously by electrogoniometer and the developed software program in 10 volunteers. The results were recorded in degrees and the time required for each method was also measured. The Kinect's ability to identify body joints was reliable and precise. There was moderate to excellent agreement between the Kinect-based method and the electrogoniometer (paired-sample t test, p ≥ 0.25; intraclass correlation for test-retest reliability, ≥0.75). Kinect-based measurement was much faster and required less equipment, but accurate measurement with Microsoft Kinect was only possible if the participant was in its field of view.

Islands of biogeodiversity in arid lands on a polygons map study: Detecting scale invariance patterns from natural resources maps.

PubMed

Ibáñez, J J; Pérez-Gómez, R; Brevik, Eric C; Cerdà, A

2016-12-15

Many maps (geology, hydrology, soil, vegetation, etc.) are created to inventory natural resources. Each of these resources is mapped using a unique set of criteria, including scales and taxonomies. Past research indicates that comparing results of related maps (e.g., soil and geology maps) may aid in identifying mapping deficiencies. Therefore, this study was undertaken in Almeria Province, Spain to (i) compare the underlying map structures of soil and vegetation maps and (ii) investigate if a vegetation map can provide useful soil information that was not shown on a soil map. Soil and vegetation maps were imported into ArcGIS 10.1 for spatial analysis, and results then exported to Microsoft Excel worksheets for statistical analyses to evaluate fits to linear and power law regression models. Vegetative units were grouped according to the driving forces that determined their presence or absence: (i) climatophilous (ii) lithologic-climate; and (iii) edaphophylous. The rank abundance plots for both the soil and vegetation maps conformed to Willis or Hollow Curves, meaning the underlying structures of both maps were the same. Edaphophylous map units, which represent 58.5% of the vegetation units in the study area, did not show a good correlation with the soil map. Further investigation revealed that 87% of the edaphohygrophilous units were found in ramblas, ephemeral riverbeds that are not typically classified and mapped as soils in modern systems, even though they meet the definition of soil given by the most commonly used and most modern soil taxonomic systems. Furthermore, these edaphophylous map units tend to be islands of biodiversity that are threatened by anthropogenic activity in the region. Therefore, this study revealed areas that need to be revisited and studied pedologically. The vegetation mapped in these areas and the soils that support it are key components of the earth's critical zone that must be studied, understood, and preserved. Copyright © 2016 Elsevier B.V. All rights reserved.

Possible Correlation of Transfusion Transmitted Diseases with Rh type and ABO Blood Group System

PubMed Central

Tyagi, Surabhi; Tyagi, Alok

2013-01-01

Background: Screening of blood is mandatory for transfusion transmitted diseases and is routinely done in the blood banks. As blood is the major source transmission of hepatitis B, hepatitis C, human immunodeficiency virus & many other diseases the hazards can be minimised by effective donor selection and screening. Aim: To find out the correlation between the transfusion transmitted diseases and blood groups and the seroprevalence of HIV, HBV, HCV & syphilis among the apparently healthy human blood donors. Study, Setting & Design: This retrospective study was conducted at the blood bank of a tertiary health care teaching centre for a period of four years. Material and Methods: All voluntary and replacement donors reporting to the blood bank were screened for HIV-1 & 2, HBsAg, HCV and Syphilis. Anti–HIV -1 & 2, HBsAg & anti - HCV was tested using the appropriate Enzyme–linked immunosorbent assay (ELISA) technique using micro–elisa kit supplied by J.Mitra & Co.Ltd. The seropositive samples were again tested on ELISA kits of RFCL &/or BIORAD for further confirmation & ruling out any false positive or false negative results. The rapid plasma reagain (RPR) test was used for estimation of syphilis infection. Statistical Analysis: The data entry was carried out using Microsoft office excel worksheet and was analysed by percentage and comparison. Results: Total of 6000 donors were screened which included voluntary and replacement donors. Seroprevalence of HIV (0.1833 %), HCV (1.28%), HBsAg (1.5833 %) and syphilis (0.4333 %) was detected. In the study done it was also noted - that the NEGATIVE blood groups were more prone to TTIs. Blood group A negative was more prone to TTIs with HIV, HBsAg and VDRL while blood group B negative was more affected by HCV. Conclusion: Seroprevalence of these infections shows that routine screening is a must for blood and blood product safe transfusion. Do negative blood groups predispose to TTIs? A finding which makes us think…. PMID:24179900

Possible Correlation of Transfusion Transmitted Diseases with Rh type and ABO Blood Group System.

PubMed

Tyagi, Surabhi; Tyagi, Alok

2013-09-01

Screening of blood is mandatory for transfusion transmitted diseases and is routinely done in the blood banks. As blood is the major source transmission of hepatitis B, hepatitis C, human immunodeficiency virus & many other diseases the hazards can be minimised by effective donor selection and screening. To find out the correlation between the transfusion transmitted diseases and blood groups and the seroprevalence of HIV, HBV, HCV & syphilis among the apparently healthy human blood donors. Study, Setting & Design: This retrospective study was conducted at the blood bank of a tertiary health care teaching centre for a period of four years. All voluntary and replacement donors reporting to the blood bank were screened for HIV-1 & 2, HBsAg, HCV and Syphilis. Anti-HIV -1 & 2, HBsAg & anti - HCV was tested using the appropriate Enzyme-linked immunosorbent assay (ELISA) technique using micro-elisa kit supplied by J.Mitra & Co.Ltd. The seropositive samples were again tested on ELISA kits of RFCL &/or BIORAD for further confirmation & ruling out any false positive or false negative results. The rapid plasma reagain (RPR) test was used for estimation of syphilis infection. The data entry was carried out using Microsoft office excel worksheet and was analysed by percentage and comparison. Total of 6000 donors were screened which included voluntary and replacement donors. Seroprevalence of HIV (0.1833 %), HCV (1.28%), HBsAg (1.5833 %) and syphilis (0.4333 %) was detected. In the study done it was also noted - that the NEGATIVE blood groups were more prone to TTIs. Blood group A negative was more prone to TTIs with HIV, HBsAg and VDRL while blood group B negative was more affected by HCV. Seroprevalence of these infections shows that routine screening is a must for blood and blood product safe transfusion. Do negative blood groups predispose to TTIs? A finding which makes us think….

Online Interactive Tutorials for Creating Graphs With Excel 2007 or 2010

PubMed Central

Vanselow, Nicholas R

2012-01-01

Graphic display of clinical data is a useful tool for the behavior-analytic clinician. However, graphs can sometimes be difficult to create. We describe how to access and use an online interactive tutorial that teaches the user to create a variety of graphs often used by behavior analysts. Three tutorials are provided that cover the basics of Microsoft Excel 2007 or 2010, creating graphs for clinical purposes, and creating graphs for research purposes. The uses for this interactive tutorial and other similar programs are discussed. PMID:23326629

An Excel Macro to Plot the HFE-Diagram to Identify Sea Water Intrusion Phases.

PubMed

Giménez-Forcada, Elena; Sánchez San Román, F Javier

2015-01-01

A hydrochemical facies evolution diagram (HFE-D) is a multirectangular diagram, which is a useful tool in the interpretation of sea water intrusion processes. This method note describes a simple method for generating an HFE-D plot using the spreadsheet software package, Microsoft Excel. The code was applied to groundwater from the alluvial coastal plain of Grosseto (Tuscany, Italy), which is characterized by a complex salinization process in which sea water mixes with sulfate or bicarbonate recharge water. © 2014, National GroundWater Association.

Online interactive tutorials for creating graphs with excel 2007 or 2010.

PubMed

Vanselow, Nicholas R; Bourret, Jason C

2012-01-01

Graphic display of clinical data is a useful tool for the behavior-analytic clinician. However, graphs can sometimes be difficult to create. We describe how to access and use an online interactive tutorial that teaches the user to create a variety of graphs often used by behavior analysts. Three tutorials are provided that cover the basics of Microsoft Excel 2007 or 2010, creating graphs for clinical purposes, and creating graphs for research purposes. The uses for this interactive tutorial and other similar programs are discussed.

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel: V. Predictive absorbability models.

PubMed

Langenbucher, Frieder

2007-08-01

This paper discusses Excel applications related to the prediction of drug absorbability from physicochemical constants. PHDISSOC provides a generalized model for pH profiles of electrolytic dissociation, water solubility, and partition coefficient. SKMODEL predicts drug absorbability, based on a log-log plot of water solubility and O/W partitioning; augmented by additional features such as electrolytic dissociation, melting point, and the dose administered. GIABS presents a mechanistic model of g.i. drug absorption. BIODATCO presents a database compiling relevant drug data to be used for quantitative predictions.

Graphing techniques for materials laboratory using Excel

NASA Technical Reports Server (NTRS)

Kundu, Nikhil K.

1994-01-01

Engineering technology curricula stress hands on training and laboratory practices in most of the technical courses. Laboratory reports should include analytical as well as graphical evaluation of experimental data. Experience shows that many students neither have the mathematical background nor the expertise for graphing. This paper briefly describes the procedure and data obtained from a number of experiments such as spring rate, stress concentration, endurance limit, and column buckling for a variety of materials. Then with a brief introduction to Microsoft Excel the author explains the techniques used for linear regression and logarithmic graphing.

Uncertainty in Measurement: A Review of Monte Carlo Simulation Using Microsoft Excel for the Calculation of Uncertainties Through Functional Relationships, Including Uncertainties in Empirically Derived Constants

PubMed Central

Farrance, Ian; Frenkel, Robert

2014-01-01

The Guide to the Expression of Uncertainty in Measurement (usually referred to as the GUM) provides the basic framework for evaluating uncertainty in measurement. The GUM however does not always provide clearly identifiable procedures suitable for medical laboratory applications, particularly when internal quality control (IQC) is used to derive most of the uncertainty estimates. The GUM modelling approach requires advanced mathematical skills for many of its procedures, but Monte Carlo simulation (MCS) can be used as an alternative for many medical laboratory applications. In particular, calculations for determining how uncertainties in the input quantities to a functional relationship propagate through to the output can be accomplished using a readily available spreadsheet such as Microsoft Excel. The MCS procedure uses algorithmically generated pseudo-random numbers which are then forced to follow a prescribed probability distribution. When IQC data provide the uncertainty estimates the normal (Gaussian) distribution is generally considered appropriate, but MCS is by no means restricted to this particular case. With input variations simulated by random numbers, the functional relationship then provides the corresponding variations in the output in a manner which also provides its probability distribution. The MCS procedure thus provides output uncertainty estimates without the need for the differential equations associated with GUM modelling. The aim of this article is to demonstrate the ease with which Microsoft Excel (or a similar spreadsheet) can be used to provide an uncertainty estimate for measurands derived through a functional relationship. In addition, we also consider the relatively common situation where an empirically derived formula includes one or more ‘constants’, each of which has an empirically derived numerical value. Such empirically derived ‘constants’ must also have associated uncertainties which propagate through the functional relationship and contribute to the combined standard uncertainty of the measurand. PMID:24659835

Uncertainty in measurement: a review of monte carlo simulation using microsoft excel for the calculation of uncertainties through functional relationships, including uncertainties in empirically derived constants.

PubMed

Farrance, Ian; Frenkel, Robert

2014-02-01

The Guide to the Expression of Uncertainty in Measurement (usually referred to as the GUM) provides the basic framework for evaluating uncertainty in measurement. The GUM however does not always provide clearly identifiable procedures suitable for medical laboratory applications, particularly when internal quality control (IQC) is used to derive most of the uncertainty estimates. The GUM modelling approach requires advanced mathematical skills for many of its procedures, but Monte Carlo simulation (MCS) can be used as an alternative for many medical laboratory applications. In particular, calculations for determining how uncertainties in the input quantities to a functional relationship propagate through to the output can be accomplished using a readily available spreadsheet such as Microsoft Excel. The MCS procedure uses algorithmically generated pseudo-random numbers which are then forced to follow a prescribed probability distribution. When IQC data provide the uncertainty estimates the normal (Gaussian) distribution is generally considered appropriate, but MCS is by no means restricted to this particular case. With input variations simulated by random numbers, the functional relationship then provides the corresponding variations in the output in a manner which also provides its probability distribution. The MCS procedure thus provides output uncertainty estimates without the need for the differential equations associated with GUM modelling. The aim of this article is to demonstrate the ease with which Microsoft Excel (or a similar spreadsheet) can be used to provide an uncertainty estimate for measurands derived through a functional relationship. In addition, we also consider the relatively common situation where an empirically derived formula includes one or more 'constants', each of which has an empirically derived numerical value. Such empirically derived 'constants' must also have associated uncertainties which propagate through the functional relationship and contribute to the combined standard uncertainty of the measurand.

Linear Equations. [Student Worksheets for Vocational Agricultural Courses].

ERIC Educational Resources Information Center

Jewell, Larry R.

This learning module provides students with practice in applying algebraic operations to vocational agriculture. The module consists of unit objectives, definitions, information, problems to solve, worksheets suitable for various levels of vocational agriculture instruction, and answer keys for the problems and worksheets. This module, which…

Common Fractions. [Student Worksheets for Vocational Agricultural Courses].

ERIC Educational Resources Information Center

Jewell, Larry R.

This learning module provides students with practice in applying mathematical operations to vocational agriculture. The module consists of unit objectives, definitions, information, problems to solve, worksheets suitable for various levels of vocational agriculture instruction, and answer keys for the problems and worksheets. This module, which…

75 FR 45600 - Information Collection; Customer Data Worksheet Request for Service Center Information Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... DEPARTMENT OF AGRICULTURE Farm Service Agency Information Collection; Customer Data Worksheet Request for Service Center Information Management System (SCIMS) Record Changes AGENCY: Farm Service... Customer Data Worksheet Request for Service Center Information Management System (SCIMS) that contains the...

Developing Guided Inquiry-Based Student Lab Worksheet for Laboratory Knowledge Course

NASA Astrophysics Data System (ADS)

Rahmi, Y. L.; Novriyanti, E.; Ardi, A.; Rifandi, R.

2018-04-01

The course of laboratory knowledge is an introductory course for biology students to follow various lectures practicing in the biology laboratory. Learning activities of laboratory knowledge course at this time in the Biology Department, Universitas Negeri Padang has not been completed by supporting learning media such as student lab worksheet. Guided inquiry learning model is one of the learning models that can be integrated into laboratory activity. The study aimed to produce student lab worksheet based on guided inquiry for laboratory knowledge course and to determine the validity of lab worksheet. The research was conducted using research and developmet (R&D) model. The instruments used in data collection in this research were questionnaire for student needed analysis and questionnaire to measure the student lab worksheet validity. The data obtained was quantitative from several validators. The validators consist of three lecturers. The percentage of a student lab worksheet validity was 94.18 which can be categorized was very good.

Application of visual basic in high-throughput mass spectrometry-directed purification of combinatorial libraries.

PubMed

Li, B; Chan, E C Y

2003-01-01

We present an approach to customize the sample submission process for high-throughput purification (HTP) of combinatorial parallel libraries using preparative liquid chromatography electrospray ionization mass spectrometry. In this study, Visual Basic and Visual Basic for Applications programs were developed using Microsoft Visual Basic 6 and Microsoft Excel 2000, respectively. These programs are subsequently applied for the seamless electronic submission and handling of data for HTP. Functions were incorporated into these programs where medicinal chemists can perform on-line verification of the purification status and on-line retrieval of postpurification data. The application of these user friendly and cost effective programs in our HTP technology has greatly increased our work efficiency by reducing paper work and manual manipulation of data.

77 FR 20890 - Proposed Information Collection (Interest Rate Reduction Refinancing Loan Worksheet) Activity...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

... (Interest Rate Reduction Refinancing Loan Worksheet) Activity: Comment Request AGENCY: Veterans Benefits... to determine whether lenders computed the loan amount on interest rate reduction refinancing loans.... Title: Interest Rate Reduction Refinancing Loan Worksheet, VA Form 26-8923. OMB Control Number: 2900...

76 FR 69738 - Revised 2011 Annual Telecommunications Reporting Worksheet (FCC Form 499-A) and Accompanying...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... Telecommunications Reporting Worksheet (FCC Form 499-A) and Accompanying Instructions AGENCY: Federal Communications... Telecommunications Reporting Worksheet (FCC Form 499-A) and accompanying instructions that have been approved by the... INFORMATION CONTACT: Ernesto Beckford, Wireline Competition Bureau, Telecommunications Access Policy Division...

The Critical Thinking Worksheet.

ERIC Educational Resources Information Center

Agnew, Priscilla

A description is provided of the use of a Critical Thinking Worksheet as a pedagogical tool for introducing critical thinking to students of philosophy and informal logic. First, an accompanying handout introduces essential terms such as "argument,""conclusion," and "reasons or premises." The worksheet itself constitutes the second page of the…

Reviewing Printed Subject Bibliographies: A Worksheet.

ERIC Educational Resources Information Center

Tabachnick, Sharon

1989-01-01

Discusses the importance of reviews of bibliographies to librarians, identifies common problems with the review process, and proposes a worksheet that will enable reviewers of printed subject bibliographies to address the needs of librarians. The theoretical foundation for the concepts used in the worksheet are discussed. (14 references) (CLB)

The Metric System. [Student Worksheets for Vocational Agricultural Courses].

ERIC Educational Resources Information Center

Jewell, Larry R.

This learning module provides students with practice in applying mathematical operations to vocational agriculture. The module consists of unit objectives, definitions, information, problems to solve, worksheets suitable for various levels of vocational agriculture instruction, and answer keys for the problems and worksheets. This module, which…

Using Excel To Study The Relation Between Protein Dihedral Angle Omega And Backbone Length

NASA Astrophysics Data System (ADS)

Shew, Christopher; Evans, Samari; Tao, Xiuping

How to involve the uninitiated undergraduate students in computational biophysics research? We made use of Microsoft Excel to carry out calculations of bond lengths, bond angles and dihedral angles of proteins. Specifically, we studied protein backbone dihedral angle omega by examining how its distribution varies with the length of the backbone length. It turns out Excel is a respectable tool for this task. An ordinary current-day desktop or laptop can handle the calculations for midsized proteins in just seconds. Care has to be taken to enter the formulas for the spreadsheet column after column to minimize the computing load. Supported in part by NSF Grant #1238795.

[Construction of abridged life table for health evaluation of local resident using Excel program].

PubMed

Chen, Qingsha; Wang, Feng; Li, Xiaozhen; Yang, Jian; Yu, Shouyi; Hu, Jun

2012-05-01

To provide an easy computational tool for evaluating the health condition of local residents. An abridged life table was programmed by applying mathematical functions and formula in Excel program and tested with the real study data to evaluate the results computed. The Excel was capable of computing group death probability of age in the life table ((n)q(x)), number of survivors (l(x)), number of death ((n)d(x)), survival per person-year ((n)L(x)), survival total per person-year (T(x)) and life expectancy (e(x)). The calculated results were consistent with those by SAS. The abridged life table constructed using Microsoft Excel can conveniently and accurately calculate the relevant indices for evaluating the health condition of the residents.

76 FR 20976 - Wireline Competition Bureau Releases 2011 Annual Telecommunications Reporting Worksheet (FCC Form...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... Releases 2011 Annual Telecommunications Reporting Worksheet (FCC Form 499-A) and Accompanying Instructions... Competition Bureau released the revised annual Telecommunications Reporting Worksheet (FCC Form 499-A) and... telecommunications activities) into Appendix B. (5) Noting that email addresses are generally required so that the...

Acquiring Knowledge about Biodiversity in a Museum--Are Worksheets Effective?

ERIC Educational Resources Information Center

Krombab, Angela; Harms, Ute

2008-01-01

This study examined the effectiveness of worksheets while learning about biodiversity in a natural history museum. Despite the frequent use of worksheets by school classes during out-of-school activities, their effectiveness in enhancing knowledge acquisition has been addressed by relatively few empirical studies. 148 Austrian grammar school…

Teaching Financial Accounting via a Worksheet Approach.

ERIC Educational Resources Information Center

Vincent, Vern C.; Dietz, Elizabeth M.

A classroom research study investigated the effectiveness of an approach to financial accounting instruction that uses worksheets to bring together the conceptual and practical aspects of the field. Students were divided into two groups, one taught by traditional lecture method and the other taught with worksheet exercises and lectures stressing…

Worksheets for computing recommended notebook computer and workstation adjustments.

PubMed

Nanthavanij, Suebsak; Udomratana, Chatkate; Hansawad, Saowalak; Thepkanjana, Jayaporn; Tantasuwan, Wanchalerm

2013-01-01

This paper discusses the design and development of worksheets for helping notebook computer (NBC) users to compute NBC and workstation adjustments so as to assume an appropriate seated posture. The worksheets (one for male users, the other for female ones) require the following information: body height, NBC screen size, work surface height, and seat height. The worksheets contain tables for estimating recommended NBC base angle, NBC screen angle, body-NBC distance, work surface height, and seat height. Additionally, they include flow charts to help NBC users to determine necessary adjustment accessories and their settings.

A Worksheet to Enhance Students’ Conceptual Understanding in Vector Components

NASA Astrophysics Data System (ADS)

Wutchana, Umporn; Emarat, Narumon

2017-09-01

With and without physical context, we explored 59 undergraduate students’conceptual and procedural understanding of vector components using both open ended problems and multiple choice items designed based on research instruments used in physics education research. The results showed that a number of students produce errors and revealed alternative conceptions especially when asked to draw graphical form of vector components. It indicated that most of them did not develop a strong foundation of understanding in vector components and could not apply those concepts to such problems with physical context. Based on the findings, we designed a worksheet to enhance the students’ conceptual understanding in vector components. The worksheet is composed of three parts which help students to construct their own understanding of definition, graphical form, and magnitude of vector components. To validate the worksheet, focus group discussions of 3 and 10 graduate students (science in-service teachers) had been conducted. The modified worksheet was then distributed to 41 grade 9 students in a science class. The students spent approximately 50 minutes to complete the worksheet. They sketched and measured vectors and its components and compared with the trigonometry ratio to condense the concepts of vector components. After completing the worksheet, their conceptual model had been verified. 83% of them constructed the correct model of vector components.

Leveraging routine clinical materials and mobile technology to assess CBT fidelity: the Innovative Methods to Assess Psychotherapy Practices (imAPP) study.

PubMed

Wiltsey Stirman, Shannon; Marques, Luana; Creed, Torrey A; Gutner, Cassidy A; DeRubeis, Robert; Barnett, Paul G; Kuhn, Eric; Suvak, Michael; Owen, Jason; Vogt, Dawne; Jo, Booil; Schoenwald, Sonja; Johnson, Clara; Mallard, Kera; Beristianos, Matthew; La Bash, Heidi

2018-05-22

Identifying scalable strategies for assessing fidelity is a key challenge in implementation science. However, for psychosocial interventions, the existing, reliable ways to test treatment fidelity quality are often labor intensive, and less burdensome strategies may not reflect actual clinical practice. Cognitive behavioral therapies (CBTs) provide clinicians with a set of effective core elements to help treat a multitude of disorders, which, evidence suggests, need to be delivered with fidelity to maximize potential client impact. The current "gold standard" for rating CBTs is rating recordings of therapy sessions, which is extremely time-consuming and requires a substantial amount of initial training. Although CBTs can vary based on the target disorder, one common element employed in most CBTs is the use of worksheets to identify specific behaviors and thoughts that affect a client's ability to recover. The present study will develop and evaluate an innovative new approach to rate CBT fidelity, by developing a universal CBT scoring system based on worksheets completed in therapy sessions. To develop a scoring system for CBT worksheets, we will compile common CBT elements from a variety of CBT worksheets for a range of psychiatric disorders and create adherence and competence measures. We will collect archival worksheets from past studies to test the scoring system and assess test-retest reliability. To evaluate whether CBT worksheet scoring accurately reflects clinician fidelity, we will recruit clinicians who are engaged in a CBT for depression, anxiety, and/or posttraumatic stress disorder. Clinicians and clients will transmit routine therapy materials produced in session (e.g., worksheets, clinical notes, session recordings) to the study team after each session. We will compare observer-rated fidelity, clinical notes, and fidelity-rated worksheets to identify the most effective and efficient method to assess clinician fidelity. Clients will also be randomly assigned to either complete the CBT worksheets on paper forms or on a mobile application (app) to learn if worksheet format influences clinician and client experience or differs in terms of reflecting fidelity. Scoring fidelity using CBT worksheets may allow clinics to test fidelity in a short and effective manner, enhancing continuous quality improvement in the workplace. Clinicians and clinics can use such data to improve clinician fidelity in real time, leading to improved patient outcomes. ClinicalTrials.gov NCT03479398 . Retrospectively registered March 20, 2018.

Development of a Microsoft Excel tool for one-parameter Rasch model of continuous items: an application to a safety attitude survey.

PubMed

Chien, Tsair-Wei; Shao, Yang; Kuo, Shu-Chun

2017-01-10

Many continuous item responses (CIRs) are encountered in healthcare settings, but no one uses item response theory's (IRT) probabilistic modeling to present graphical presentations for interpreting CIR results. A computer module that is programmed to deal with CIRs is required. To present a computer module, validate it, and verify its usefulness in dealing with CIR data, and then to apply the model to real healthcare data in order to show how the CIR that can be applied to healthcare settings with an example regarding a safety attitude survey. Using Microsoft Excel VBA (Visual Basic for Applications), we designed a computer module that minimizes the residuals and calculates model's expected scores according to person responses across items. Rasch models based on a Wright map and on KIDMAP were demonstrated to interpret results of the safety attitude survey. The author-made CIR module yielded OUTFIT mean square (MNSQ) and person measures equivalent to those yielded by professional Rasch Winsteps software. The probabilistic modeling of the CIR module provides messages that are much more valuable to users and show the CIR advantage over classic test theory. Because of advances in computer technology, healthcare users who are familiar to MS Excel can easily apply the study CIR module to deal with continuous variables to benefit comparisons of data with a logistic distribution and model fit statistics.

A Computer-Based Laboratory Project for the Study of Stimulus Generalization and Peak Shift

ERIC Educational Resources Information Center

Derenne, Adam; Loshek, Eevett

2009-01-01

This paper describes materials designed for classroom projects on stimulus generalization and peak shift. A computer program (originally written in QuickBASIC) is used for data collection and a Microsoft Excel file with macros organizes the raw data on a spreadsheet and creates generalization gradients. The program is designed for use with human…

Michael Woodhouse | NREL

Science.gov Websites

, physics and chemistry. (1998-2002) Featured Publications Fu, R., T.L. James, M. Woodhouse. "Economic /10.1039/C3EE40701B. Goodrich, A., P. Hacke, Q. Wang, B. Sopori, R. Margolis, T.L. James, and Woodhouse, M InformationMicrosoft Excel. Woodhouse, M., A. Goodrich, R. Margolis, T.L. James, M. Lokanc, and R. Eggert. "

Developing Weight Training Programs with Microsoft Excel: Techtorial #2. Article #3 in a 6-Part Series

ERIC Educational Resources Information Center

Mears, Derrick

2009-01-01

Developing personalized fitness programs to meet individual needs of students can be an overwhelming task for the physical educator. The National Standards for Physical Education (NASPE) indicate that students should achieve and maintain appropriate levels of physical fitness. To effectively meet standards with the growing diversity of curricular…

ALOG user's manual: A Guide to using the spreadsheet-based artificial log generator

Treesearch

Matthew F. Winn; Philip A. Araman; Randolph H. Wynne

2012-01-01

Computer programs that simulate log sawing can be valuable training tools for sawyers, as well as a means oftesting different sawing patterns. Most available simulation programs rely on diagrammed-log databases, which canbe very costly and time consuming to develop. Artificial Log Generator (ALOG) is a user-friendly Microsoft® Excel®...

Using Microsoft Excel to Assess Standards: A "Techtorial". Article #2 in a 6-Part Series

ERIC Educational Resources Information Center

Mears, Derrick

2009-01-01

Standards-based assessment is a term currently being used quite often in educational reform discussions. The philosophy behind this initiative is to utilize "standards" or "benchmarks" to focus instruction and assessments of student learning. The National Standards for Physical Education (NASPE, 2004) provide a framework to guide this process for…

75 FR 45085 - Fisheries in the Western Pacific; Bottomfish and Seamount Groundfish Fisheries; 2010-11 Main...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-02

... would be caught, but because the 2009-10 fishery took less than the TAC, the associated risk of... will be accepted in Microsoft Word or Excel, WordPerfect, or Adobe PDF file formats only. A... other information, and taking into account the associated risk of overfishing. The Deep 7 bottomfish are...

A Trainee Demand Analysis for the Expansion of the Marine Corps Embassy Security Group

DTIC Science & Technology

2013-04-17

FY GIXid$ of serwite (GOS] 2010 3 lOll ~ ,2012 5 2013 X 2014 X ,2015 )t 2016 X 2017 X , 2018 X 2019 X ,1010 X L lntetfaee J oetachme;nt...Walkenbach, J. (2010). Microsoft Excel 2010 bible . Indianapolis, IN: Wiley. Wang, J., Egudo, R., & Galanis, G. (2007, August). Determining training demand

75 FR 26703 - Atlantic Coastal Fisheries Cooperative Management Act Provisions; Weakfish Fishery

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... any one of the following methods: Electronic Submissions: Submit all electronic public comments via... submit attachments to electronic comments in Microsoft Word, Excel, WordPerfect, or Adobe PDF file... the tip of the lower jaw with the mouth closed to the end of the lower tip of the tail) in or from the...

76 FR 32025 - Endangered and Threatened Wildlife and Plants: Proposed Rulemaking To Revise Critical Habitat for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-02

...-BA81 by any one of the following methods: Electronic Submissions: Federal eRulemaking Portal: http... required fields if you wish to remain anonymous). Attachments to electronic comments will be accepted in Microsoft Word, Excel, WordPerfect, or Adobe PDF file formats only. The petition, 90-day finding, 12-month...

78 FR 66675 - Endangered and Threatened Wildlife; 90-Day Finding on a Petition To List Multiple Species of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

... to electronic comments will be accepted in Microsoft Word, Excel, or Adobe PDF file formats only... this document, identified by the code NOAA-NMFS-2013-0150, by any of the following methods: Electronic Submissions: Submit all electronic comments via the Federal eRulemaking Portal. Go to www.regulations.gov...

Active Learning and Threshold Concepts in Multiple Testing That Can Further Develop Student Critical Statistical Thinking

ERIC Educational Resources Information Center

White, Desley

2015-01-01

Two practical activities are described, which aim to support critical thinking about statistics as they concern multiple outcomes testing. Formulae are presented in Microsoft Excel spreadsheets, which are used to calculate the inflation of error associated with the quantity of tests performed. This is followed by a decision-making exercise, where…

78 FR 35153 - Fisheries Off West Coast States; Modifications of the West Coast Commercial Salmon Fisheries...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-12

... seq. Dated: June 7, 2013. Kara Meckley, Acting Deputy Director, Office of Sustainable Fisheries... June 27, 2013. ADDRESSES: You may submit comments, identified by NOAA-NMFS-2012-0248, by any one of the... anonymous). Attachments to electronic comments will be accepted in Microsoft Word, Excel, or Adobe PDF file...

78 FR 52032 - Atlantic Highly Migratory Species; 2006 Consolidated Atlantic Highly Migratory Species Fishery...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-21

... may submit attachments to electronic comments in Microsoft Word or Excel, WordPerfect, or Adobe PDF... categories per the percentages outlined in the 2006 Consolidated HMS FMP. In other words, the combined effect... other words, if a vessel is not allowed access to the Cape Hatteras Gear Restricted Area due to the...

A Field-Tested Task Analysis for Creating Single-Subject Graphs Using Microsoft[R] Office Excel

ERIC Educational Resources Information Center

Lo, Ya-yu; Konrad, Moira

2007-01-01

Creating single-subject (SS) graphs is challenging for many researchers and practitioners because it is a complex task with many steps. Although several authors have introduced guidelines for creating SS graphs, many users continue to experience frustration. The purpose of this article is to minimize these frustrations by providing a field-tested…

Hematology and Serum Biochemistry Reference Intervals for Six-Week-Old, Farm-Reared Chinese Ring-Necked Pheasants ( Phasianus colchicus ) from Minnesota.

PubMed

Dzikamunhenga, R S; Griffith, R W; Hostetter, S; Fisher, P; Larson, W

2017-06-01

Chinese ring-necked pheasants ( Phasianus colchicus ) are commonly farmed in intensive operations for purposes such as meat production, hunting preserves, or research. Under these conditions, pheasants frequently suffer medical ailments such as bacterial, viral, and parasitic infections or nutritional or metabolic disorders. Relatively little scientific information exists regarding clinical pathology reference intervals (RIs) for farm-reared pheasants. The objective of this study was to determine RIs for hematologic and serum biochemical variables for Chinese ring-necked pheasants from Minnesota at 6 wk of age. Blood samples from 119 clinically healthy Chinese ring-necked pheasants were analyzed using standard techniques. Reference intervals were generated in Microsoft® Excel® 2013 (Microsoft, Redmond, WA) using Reference Value Advisor freeware version 2.1 (Microsoft). Ninety-five percent RIs were determined using nonparametric methods that followed Clinical and Laboratory Standards Institute guidelines. These RIs will be useful for the monitoring of health and diagnosis of disease in confined Chinese ring-necked pheasant populations that are approximately 6 wk old.

SU-E-E-02: An Excel-Based Study Tool for ABR-Style Exams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cline, K; Stanley, D; Defoor, D

2015-06-15

Purpose: As the landscape of learning and testing shifts toward a computer-based environment, a replacement for paper-based methods of studying is desirable. Using Microsoft Excel, a study tool was developed that allows the user to populate multiple-choice questions and then generate an interactive quiz session to answer them. Methods: The code for the tool was written using Microsoft Excel Visual Basic for Applications with the intent that this tool could be implemented by any institution with Excel. The base tool is a template with a setup macro, which builds out the structure based on user’s input. Once the framework ismore » built, the user can input sets of multiple-choice questions, answer choices, and even add figures. The tool can be run in random-question or sequential-question mode for single or multiple courses of study. The interactive session allows the user to select answer choices and immediate feedback is provided. Once the user is finished studying, the tool records the day’s progress by reporting progress statistics useful for trending. Results: Six doctoral students at UTHSCSA have used this tool for the past two months to study for their qualifying exam, which is similar in format and content to the American Board of Radiology (ABR) Therapeutic Part II exam. The students collaborated to create a repository of questions, met weekly to go over these questions, and then used the tool to prepare for their exam. Conclusion: The study tool has provided an effective and efficient way for students to collaborate and be held accountable for exam preparation. The ease of use and familiarity of Excel are important factors for the tool’s use. There are software packages to create similar question banks, but this study tool has no additional cost for those that already have Excel. The study tool will be made openly available.« less

Developing CORE model-based worksheet with recitation task to facilitate students’ mathematical communication skills in linear algebra course

NASA Astrophysics Data System (ADS)

Risnawati; Khairinnisa, S.; Darwis, A. H.

2018-01-01

The purpose of this study was to develop a CORE model-based worksheet with recitation task that were valid and practical and could facilitate students’ communication skills in Linear Algebra course. This study was conducted in mathematics education department of one public university in Riau, Indonesia. Participants of the study were media and subject matter experts as validators as well as students from mathematics education department. The objects of this study are students’ worksheet and students’ mathematical communication skills. The results of study showed that: (1) based on validation of the experts, the developed students’ worksheet was valid and could be applied for students in Linear Algebra courses; (2) based on the group trial, the practicality percentage was 92.14% in small group and 90.19% in large group, so the worksheet was very practical and could attract students to learn; and (3) based on the post test, the average percentage of ideals was 87.83%. In addition, the results showed that the students’ worksheet was able to facilitate students’ mathematical communication skills in linear algebra course.

Developing Student Worksheet Based On Higher Order Thinking Skills on the Topic of Transistor Power Amplifier

NASA Astrophysics Data System (ADS)

Sardia Ratna Kusuma, Luckey; Rakhmawati, Lusia; Wiryanto

2018-04-01

The purpose of this study is to develop a student worksheet about the transistor power amplifier based on higher order thinking skills include critical, logical, reflective, metacognitive, and creative thinking, which could be useful for teachers in improving student learning outcomes. Research and Development (R & D) methodology was used in this study. The pilot study of the worksheet was carried out with class X AV 2 at SMK Negeri 5 Surabaya. The result showed satisfies aspect of validity with 81.76 %, and effectiveness (students learning outcomes is classically passed out with percentage of 82.4 % and the students gave positive responses to the student worksheet of each statement. It can be concluded that this worksheet categorized good and worthy to be used as a source of learning in the learning activities.

The Computer Student Worksheet Based Mathematical Literacy for Statistics

NASA Astrophysics Data System (ADS)

Manoy, J. T.; Indarasati, N. A.

2018-01-01

The student worksheet is one of media teaching which is able to improve teaching an activity in the classroom. Indicators in mathematical literacy were included in a student worksheet is able to help the students for applying the concept in daily life. Then, the use of computers in learning can create learning with environment-friendly. This research used developmental research which was Thiagarajan (Four-D) development design. There are 4 stages in the Four-D, define, design, develop, and disseminate. However, this research was finish until the third stage, develop stage. The computer student worksheet based mathematical literacy for statistics executed good quality. This student worksheet is achieving the criteria if able to achieve three aspects, validity, practicality, and effectiveness. The subject in this research was the students at The 1st State Senior High School of Driyorejo, Gresik, grade eleven of The 5th Mathematics and Natural Sciences. The computer student worksheet products based mathematical literacy for statistics executed good quality, while it achieved the aspects for validity, practical, and effectiveness. This student worksheet achieved the validity aspects with an average of 3.79 (94.72%), and practical aspects with an average of 2.85 (71.43%). Besides, it achieved the effectiveness aspects with a percentage of the classical complete students of 94.74% and a percentage of the student positive response of 75%.

"'Cause Someday We All Die": Rhetoric, Agency, and the Case of the "Patient" Preferences Worksheet

ERIC Educational Resources Information Center

Keranen, Lisa

2007-01-01

"Code status" is a prominent feature of end-of-life discussions in U.S. hospitals. This essay analyzes how the rhetoric of code status articulates the terms of end-of-life decision-making in one hospital's "Patient" Preferences Worksheet. The Worksheet signifies the abandonment of the technological fix as the preferred…

[KIND Worksheet Packet: Wild Animals (Junior).

ERIC Educational Resources Information Center

National Association for Humane and Environmental Education, East Haddam, CT.

This packet is the junior part of a series of worksheet packets available at both junior (grades 3-4) and senior (grades 5-6) levels that covers a variety of humane and environmental topics. Each packet includes 10 worksheets, all of which originally appeared in past issues of the annual teaching magazine "KIND (Kids in Nature's Defense)…

[KIND Worksheet Packet: Wild Animals (Senior).

ERIC Educational Resources Information Center

National Association for Humane and Environmental Education, East Haddam, CT.

This packet is the senior part of a series of worksheet packets available at both junior (grades 3-4) and senior (grades 5-6) levels that covers a variety of humane and environmental topics. Each packet includes 10 worksheets, all of which originally appeared in past issues of the annual teaching magazine "KIND (Kids in Nature's Defense)…

Understanding Solubility through Excel Spreadsheets

NASA Astrophysics Data System (ADS)

Brown, Pamela

2001-02-01

This article describes assignments related to the solubility of inorganic salts that can be given in an introductory general chemistry course. Le Châtelier's principle, solubility, unit conversion, and thermodynamics are tied together to calculate heats of solution by two methods: heats of formation and an application of the van't Hoff equation. These assignments address the need for math, graphing, and computer skills in the chemical technology program by developing skill in the use of Microsoft Excel to prepare spreadsheets and graphs and to perform linear and nonlinear curve-fitting. Background information on the value of understanding and predicting solubility is provided.

Development of biology student worksheets to facilitate science process skills of student

NASA Astrophysics Data System (ADS)

Rahayu, Y. S.; Pratiwi, R.; Indana, S.

2018-01-01

This research aims to describe development of Biology student worksheets to facilitate science process skills of student, at the same time to facilitate thinking skills of students in senior high school are equipped with Assesment Sheets. The worksheets development refers to cycle which includes phase analysis (analysis), planning (planning), design (design), development (development), implementation (implementation), evaluation and revision (evaluation and revision). Phase evaluation and revision is an ongoing activity conducted in each phase of the development cycle. That is, after the evaluation of the results of these activities and make revisions at any phase, then continue to the next phase. Based on the test results for grade X, XI, and XII in St. Agnes Surabaya high school, obtained some important findings. The findings are as follows. (1) Developed biology student worksheets could be used to facilitate thinking ability of students in particular skills integrated process that includes components to formulate the problem, formulate hypotheses, determine the study variables, formulate an operational definition of variables, determine the steps in the research, planning data tables, organizing Data in the form of tables/charts, drawing conclusions, (2) Developed biology student worksheets could also facilitate the development of social interaction of students such as working together, listening/respect the opinions of others, assembling equipment and materials, discuss and share information and facilitate the upgrading of skills hands-on student activity. (3) Developed biology worksheets basically could be implemented with the guidance of the teacher step by step, especially for students who have never used a similar worksheet. Guidance at the beginning of this need, especially for worksheets that require special skills or understanding of specific concepts as a prerequisite, such as using a microscope, determine the heart rate, understand the mechanism of specific indicators.

A user interface for the Kansas Geological Survey slug test model.

PubMed

Esling, Steven P; Keller, John E

2009-01-01

The Kansas Geological Survey (KGS) developed a semianalytical solution for slug tests that incorporates the effects of partial penetration, anisotropy, and the presence of variable conductivity well skins. The solution can simulate either confined or unconfined conditions. The original model, written in FORTRAN, has a text-based interface with rigid input requirements and limited output options. We re-created the main routine for the KGS model as a Visual Basic macro that runs in most versions of Microsoft Excel and built a simple-to-use Excel spreadsheet interface that automatically displays the graphical results of the test. A comparison of the output from the original FORTRAN code to that of the new Excel spreadsheet version for three cases produced identical results.

Using ArcMap, Google Earth, and Global Positioning Systems to select and locate random households in rural Haiti.

PubMed

Wampler, Peter J; Rediske, Richard R; Molla, Azizur R

2013-01-18

A remote sensing technique was developed which combines a Geographic Information System (GIS); Google Earth, and Microsoft Excel to identify home locations for a random sample of households in rural Haiti. The method was used to select homes for ethnographic and water quality research in a region of rural Haiti located within 9 km of a local hospital and source of health education in Deschapelles, Haiti. The technique does not require access to governmental records or ground based surveys to collect household location data and can be performed in a rapid, cost-effective manner. The random selection of households and the location of these households during field surveys were accomplished using GIS, Google Earth, Microsoft Excel, and handheld Garmin GPSmap 76CSx GPS units. Homes were identified and mapped in Google Earth, exported to ArcMap 10.0, and a random list of homes was generated using Microsoft Excel which was then loaded onto handheld GPS units for field location. The development and use of a remote sensing method was essential to the selection and location of random households. A total of 537 homes initially were mapped and a randomized subset of 96 was identified as potential survey locations. Over 96% of the homes mapped using Google Earth imagery were correctly identified as occupied dwellings. Only 3.6% of the occupants of mapped homes visited declined to be interviewed. 16.4% of the homes visited were not occupied at the time of the visit due to work away from the home or market days. A total of 55 households were located using this method during the 10 days of fieldwork in May and June of 2012. The method used to generate and field locate random homes for surveys and water sampling was an effective means of selecting random households in a rural environment lacking geolocation infrastructure. The success rate for locating households using a handheld GPS was excellent and only rarely was local knowledge required to identify and locate households. This method provides an important technique that can be applied to other developing countries where a randomized study design is needed but infrastructure is lacking to implement more traditional participant selection methods.

A Comparison of Best Fit Lines for Data with Outliers

ERIC Educational Resources Information Center

Glaister, P.

2005-01-01

Three techniques for determining a straight line fit to data are compared. The methods are applied to a range of datasets containing one or more outliers, and to a specific example from the field of chemistry. For the method which is the most resistant to the presence of outliers, a Microsoft Excel spreadsheet, as well as two Matlab routines, are…

78 FR 72622 - Endangered and Threatened Wildlife and Plants; 90-Day Finding on a Petition To List 11 Tarantula...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... attach multiple pieces of information, our preferred format is a spreadsheet in Microsoft Excel. By hard... addresses the petition. Evaluation of Petition The 11 species named in the petition include six species... species is endemic to the southern Western Ghats, in southern India. The species is reported from six...

ALOG: A spreadsheet-based program for generating artificial logs

Treesearch

Matthew F. Winn; Randolph H. Wynne; Philip A. Araman

2004-01-01

Log sawing simulation computer programs can be valuable tools for training sawyers as well as for testing different sawing patterns. Most available simulation programs rely on databases from which to draw logs and can be very costly and time-consuming to develop. ALOG (Artificial LOg Generator) is a Microsoft Excel®-based computer program that was developed to...

Geophysical, geochemical, mineralogical, and enivronmental data for rock samples collected in a mineralized volcanic environment, upper Animas River watershed, Colorado

USGS Publications Warehouse

McCafferty, A.E.; Horton, R.J.; Stanton, M.R.; McDougal, R.R.; Fey, D.L.

2011-01-01

* provide measurements to study the geochemical, mineralogical, and geophysical characteristics of rocks having weak to extreme degrees of alteration and to develop an understanding of how these characteristics change with alteration type. Data are provided in two digital formats: an Arc/Info geodatabase and a Microsoft Excel spreadsheet.

77 FR 67624 - Fisheries of the Northeastern United States; Atlantic Herring Fishery; Adjustment to 2013 Annual...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-13

...). Attachments to electronic comments will be accepted in Microsoft Word or Excel, WordPerfect, or Adobe PDF... accuracy against the scanned image of the paper VTRs submitted by the owner/ operator of the vessel. VTR... combination of recent fishing activity and a review of the scanned images of the original VTR were used to...

Mapping Self-Guided Learners' Searches for Video Tutorials on YouTube

ERIC Educational Resources Information Center

Garrett, Nathan

2016-01-01

While YouTube has a wealth of educational videos, how self-guided learners use these resources has not been fully described. An analysis of search engine queries for help with the use of Microsoft Excel shows that few users search for specific features or functions but instead use very general terms. Because the same videos are returned in…

A Comparison of Video Modeling, Text-Based Instruction, and No Instruction for Creating Multiple Baseline Graphs in Microsoft Excel

ERIC Educational Resources Information Center

Tyner, Bryan C.; Fienup, Daniel M.

2015-01-01

Graphing is socially significant for behavior analysts; however, graphing can be difficult to learn. Video modeling (VM) may be a useful instructional method but lacks evidence for effective teaching of computer skills. A between-groups design compared the effects of VM, text-based instruction, and no instruction on graphing performance.…

A Simple yet Accurate Method for Students to Determine Asteroid Rotation Periods from Fragmented Light Curve Data

ERIC Educational Resources Information Center

Beare, R. A.

2008-01-01

Professional astronomers use specialized software not normally available to students to determine the rotation periods of asteroids from fragmented light curve data. This paper describes a simple yet accurate method based on Microsoft Excel[R] that enables students to find periods in asteroid light curve and other discontinuous time series data of…

Development of a spreadsheet for SNPs typing using Microsoft EXCEL.

PubMed

Hashiyada, Masaki; Itakura, Yukio; Takahashi, Shirushi; Sakai, Jun; Funayama, Masato

2009-04-01

Single-nucleotide polymorphisms (SNPs) have some characteristics that make them very appropriate for forensic studies and applications. In our institute, SNPs typings were performed by the TaqMan SNP Genotyping Assays using the ABI PRISM 7500 FAST Real-Time PCR System (AppliedBiosystems) and Sequence Detection Software ver.1.4 (AppliedBiosystem). The TaqMan method was desired two positive control (Allele1 and 2) and one negative control to analyze each SNP locus. Therefore, it can be analyzed up to 24 loci of a person on a 96-well-plate at the same time. If SNPs analysis is expected to apply to biometrics authentication, 48 and over loci are required to identify a person. In this study, we designed a spreadsheet package using Microsoft EXCEL, and population data were used from our 120 SNPs population studies. On the spreadsheet, we defined SNP types using 'template files' instead of positive and negative controls. "Template files" consisted of the results of 94 unknown samples and two negative controls of each of 120 SNPs loci we had previously studied. By the use of the files, the spreadsheet could analyze 96 SNPs on a 96-wells-plate simultaneously.

78 FR 34103 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-06

... mine personnel about their behaviors the previous week, and (4) a post-test concerning miners' attitude... pre- and post-test and be interviewed upon completion of the intervention period. The operators at... Worksheet 109 1 15/60 27 Week 4 Worksheet 109 1 15/60 27 Week 5 Worksheet 109 1 15/60 27 Post-test Survey...

Global History. A Curriculum Guide. Third Semester. Theme VI: Nineteenth Century Imperialism Affected the Imperial Powers and the Colonies. Student Worksheets. Experimental Edition.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

The worksheets contained in this bulletin are designed for use in conjunction with the teaching strategies for Theme VI entitled, "Nineteenth Century Imperialism Affected the Imperial Powers and the Colonies." The worksheets correspond to specific teaching strategies with accompanying questions on the appropriate strategy page. Included are…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series C (Third Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for twenty-five lesson plans designed for a third-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series D (Fourth Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for twenty-seven lesson plans designed for a fourth-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each…

Lesson Plan Manual, a Series of Lesson Plans and Worksheets on Consumer Education and Student Worksheets for Consumer Education Lesson Plans, Adult Basic Education.

ERIC Educational Resources Information Center

New York State Education Dept., Albany.

This manual provides teachers with lesson plans in consumer education. Each lesson contains background material offering the teacher specific information on the subject of the lesson, development of understandings, student worksheets, and discussion questions to encourage student involvement. The ten lesson plans are--Buying on time, Retail…

Global History. A Curriculum Guide. Second Semester. Theme V: The Industrial Revolution Had Global Impact. Student Worksheets. Experimental Edition.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

The worksheets contained in this bulletin are designed for use in conjunction with the teaching strategies for Theme V entitled, "The Industrial Revolution Had Global Impact." The worksheets correspond to specific strategies with accompanying questions on the appropriate strategy page. Included are activities for the seven subthemes: (1)…

Creative Digital Worksheet Base on Mobile Learning

NASA Astrophysics Data System (ADS)

Wibawa, S. C.; Cholifah, R.; Utami, A. W.; Nurhidayat, A. I.

2018-01-01

The student is required to understand and act in the classroom and it is very important for selecting the media learning to determine the learning outcome. An instructional media is needed to help students achieve the best learning outcome. The objectives of this study are (1) to make Android-based student worksheet, (2) to know the students’ response on Android-based student worksheet in multimedia subject, (3) to determine the student result using Android-based student worksheet. The method used was Research and Development (R&D) using post-test-only in controlled quasi-experimental group design. The subjects of the study were 2 classes, a control class and an experimental class. The results showed (1) Android-based student worksheet was categorized very good as percentage of 85%; (2) the students’ responses was categorized very good as percentage of 86.42%; (3) the experimental class results were better than control class. The average result on cognitive tests on the experimental class was 89.97 and on control class was 78.31; whether the average result on psychomotor test on the experimental class was 89.90 and on the control class was 79.83. In conclusion, student result using Android-based student worksheet was better than those without it.

Validity of the Microsoft Kinect for assessment of postural control.

PubMed

Clark, Ross A; Pua, Yong-Hao; Fortin, Karine; Ritchie, Callan; Webster, Kate E; Denehy, Linda; Bryant, Adam L

2012-07-01

Clinically feasible methods of assessing postural control such as timed standing balance and functional reach tests provide important information, however, they cannot accurately quantify specific postural control mechanisms. The Microsoft Kinect™ system provides real-time anatomical landmark position data in three dimensions (3D), and given that it is inexpensive, portable and simple to setup it may bridge this gap. This study assessed the concurrent validity of the Microsoft Kinect™ against a benchmark reference, a multiple-camera 3D motion analysis system, in 20 healthy subjects during three postural control tests: (i) forward reach, (ii) lateral reach, and (iii) single-leg eyes-closed standing balance. For the reach tests, the outcome measures consisted of distance reached and trunk flexion angle in the sagittal (forward reach) and coronal (lateral reach) planes. For the standing balance test the range and deviation of movement in the anatomical landmark positions for the sternum, pelvis, knee and ankle and the lateral and anterior trunk flexion angle were assessed. The Microsoft Kinect™ and 3D motion analysis systems had comparable inter-trial reliability (ICC difference=0.06±0.05; range, 0.00-0.16) and excellent concurrent validity, with Pearson's r-values >0.90 for the majority of measurements (r=0.96±0.04; range, 0.84-0.99). However, ordinary least products analyses demonstrated proportional biases for some outcome measures associated with the pelvis and sternum. These findings suggest that the Microsoft Kinect™ can validly assess kinematic strategies of postural control. Given the potential benefits it could therefore become a useful tool for assessing postural control in the clinical setting. Copyright © 2012 Elsevier B.V. All rights reserved.

Strain Analysis of Stretched Tourmaline Crystals Using ImageJ, Microsoft Excel and PowerPoint

NASA Astrophysics Data System (ADS)

Bosbyshell, H.

2012-12-01

This poster describes an undergraduate structural geology lab exercise utilizing the Mohr's circle diagram for finite strain, constructed using measurements obtained from stretched tourmaline crystals. A small building housing HVAC equipment at the south end of West Chester University's Recitation Hall (itself made of serpentinite) is constructed of early-Cambrian Chickies Quartzite. Stretched tourmaline crystals, with segments joined by fibrous quartz, are visible on many surfaces (presumably originally bedding). While the original orientation of any stone is unknown, these rocks provide an opportunity for a short field exercise during a two-hour lab period and a great base for conducting strain analysis. It is always fun to ask how many in the class have ever noticed the tourmaline (few have). Students take photos using their cell phones or cameras. Since strain is a ratio the absolute size of the tourmaline crystals is immaterial. Nonetheless, this is a good opportunity to remind students of the importance of including a scale in their photographs. The photos are opened in ImageJ and the line tool is used to determine the original and final lengths of selected crystals. Students calculate strain parameters using Microsoft Excel. Then, we use Adobe Illustrator or the drafting capabilities of Microsoft PowerPoint 2010 to follow Ramsay and Huber's techniques using a Mohr's circle construction to determine the finite strain ellipse. If a stretching direction can be estimated, elongation of two crystals is all that is required to determine the strain ratio. If no stretching direction is apparent, three crystals are required for a more complicated analysis that allows for determination of the stretching direction, as well as the strain ratio.

Three-dimensional assessment of squats and drop jumps using the Microsoft Xbox One Kinect: Reliability and validity.

PubMed

Mentiplay, Benjamin F; Hasanki, Ksaniel; Perraton, Luke G; Pua, Yong-Hao; Charlton, Paula C; Clark, Ross A

2018-03-01

The Microsoft Xbox One Kinect™ (Kinect V2) contains a depth camera that can be used to manually identify anatomical landmark positions in three-dimensions independent of the standard skeletal tracking, and therefore has potential for low-cost, time-efficient three-dimensional movement analysis (3DMA). This study examined inter-session reliability and concurrent validity of the Kinect V2 for the assessment of coronal and sagittal plane kinematics for the trunk, hip and knee during single leg squats (SLS) and drop vertical jumps (DVJ). Thirty young, healthy participants (age = 23 ± 5yrs, male/female = 15/15) performed a SLS and DVJ protocol that was recorded concurrently by the Kinect V2 and 3DMA during two sessions, one week apart. The Kinect V2 demonstrated good to excellent reliability for all SLS and DVJ variables (ICC ≥ 0.73). Concurrent validity ranged from poor to excellent (ICC = 0.02 to 0.98) during the SLS task, although trunk, hip and knee flexion and two-dimensional measures of knee abduction and frontal plane projection angle all demonstrated good to excellent validity (ICC ≥ 0.80). Concurrent validity for the DVJ task was typically worse, with only two variables exceeding ICC = 0.75 (trunk and hip flexion). These findings indicate that the Kinect V2 may have potential for large-scale screening for ACL injury risk, however future prospective research is required.

Global History. A Curriculum Guide. Second Semester. Theme IV: Developing Democratic and Nationalist Movements Have Had an Effect around the World. Student Worksheets. Experimental Edition.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

The worksheets contained in this bulletin are designed for use in conjunction with the teaching strategies for Theme IV entitled, "Developing Democratic and Nationalist Movements Have Had an Effect Around the World." The worksheets correspond to specific strategies with accompanying questions on the appropriate strategy page. Included are…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series No. A (First Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for thirty-six lessons designed for a first-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each lesson.…

Related Instructional Material for Electrical Apprentice Technical Training. Student Worksheets. Series No. B (Second Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Information sheets and student worksheets for twenty-eight lesson plans designed for a second-year electrical apprentice technical training program are presented in this workbook. The information sheets provide summary information about the lesson topics and the worksheets contain problems to be solved and questions to be answered relating to each…

New Title Tweets: Using Twitter and Microsoft Excel to Broadcast New Title Lists

ERIC Educational Resources Information Center

Rodzvilla, John

2010-01-01

Today's library should be part of the online social networks so it can connect with patrons and inform them of new services and opportunities. But this need to utilize new technology must be balanced against shrinking budgets and increased costs. One way libraries can juggle these demands is to spend more time on creating content, using a mix of…

Using microsoft excel applications in the graduate intern program at Goddard Space Flight Center. M.S. Thesis

NASA Technical Reports Server (NTRS)

Antoine, Lisa

1992-01-01

An outline of the Project Operations Branch at Goddard Space Flight Center is presented that describes the management of the division and each subgroup's responsibility. The paper further describes the development of software tools for the Macintosh personal computer, and their impending implementation. A detailed step by step procedure is given for using these software tools.

Summary of Seepage Investigations in the Yakima River Basin, Washington

USGS Publications Warehouse

Magirl, C.S.; Julich, R.J.; Welch, W.B.; Curran, C.R.; Mastin, M.C.; Vaccaro, J.J.

2009-01-01

Discharge data collected by the U.S. Geological Survey, Washington State Department of Ecology, and Yakama Nation for seepage investigations in the Yakima River basin are made available as downloadable Microsoft Excel files. These data were collected for more than a century at various times for several different studies and are now available in one location to facilitate future analysis by interested parties.

National High School Center Early Warning System Tool v2.0: Technical Manual

ERIC Educational Resources Information Center

National High School Center, 2011

2011-01-01

The Early Warning System (EWS) Tool v2.0 is a Microsoft Excel-based tool developed by the National High School Center at the American Institutes for Research in collaboration with Matrix Knowledge Group. The tool enables schools, districts, and states to identify students who may be at risk of dropping out of high school and to monitor these…

Using Correlational and Prediction Data to Enhance Student Achievement in K-12 Schools: A Practical Application for School Counselors

ERIC Educational Resources Information Center

Ware, William B.; Galassi, John P.

2006-01-01

Correlational data and regression analysis provide the school counselor with a method to describe growth in achievement test scores from elementary to high school. Using Microsoft Excel, this article shows the reader in a step-by-step manner how to describe this growth pattern and how to evaluate interventions that attempt to enhance achievement…

WASP (Write a Scientific Paper) using Excel -5: Quartiles and standard deviation.

PubMed

Grech, Victor

2018-03-01

The almost inevitable descriptive statistics exercise that is undergone once data collection is complete, prior to inferential statistics, requires the acquisition of basic descriptors which may include standard deviation and quartiles. This paper provides pointers as to how to do this in Microsoft Excel™ and explains the relationship between the two. Copyright © 2018 Elsevier B.V. All rights reserved.

SouthPro : a computer program for managing uneven-aged loblolly pine stands

Treesearch

Benedict Schulte; Joseph Buongiorno; Ching-Rong Lin; Kenneth E. Skog

1998-01-01

SouthPro is a Microsoft Excel add-in program that simulates the management, growth, and yield of uneven-aged loblolly pine stands in the Southern United States. The built-in growth model of this program was calibrated from 991 uneven-aged plots in seven states, covering most growing conditions and sites. Stands are described by the number of trees in 13 size classes...

Visual Information for the Desktop, version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

2006-03-29

VZIN integrates visual analytics capabilities into popular desktop tools to aid a user in searching and understanding an information space. VZIN allows users to Drag-Drop-Visualize-Explore-Organize information within tools such as Microsoft Office, Windows Explorer, Excel, and Outlook. VZIN is tailorable to specific client or industry requirements. VZIN follows the desktop metaphors so that advanced analytical capabilities are available with minimal user training.

Parametric (On-Design) Cycle Analysis for a Separate-Exhaust Turbofan Engine With Interstage Turbine Burner

NASA Technical Reports Server (NTRS)

Liew, K. H.; Urip, E.; Yang, S. L.; Siow, Y. K.; Marek, C. J.

2005-01-01

Today s modern aircraft is based on air-breathing jet propulsion systems, which use moving fluids as substances to transform energy carried by the fluids into power. Throughout aero-vehicle evolution, improvements have been made to the engine efficiency and pollutants reduction. The major advantages associated with the addition of ITB are an increase in thermal efficiency and reduction in NOx emission. Lower temperature peak in the main combustor results in lower thermal NOx emission and lower amount of cooling air required. This study focuses on a parametric (on-design) cycle analysis of a dual-spool, separate-flow turbofan engine with an Interstage Turbine Burner (ITB). The ITB considered in this paper is a relatively new concept in modern jet engine propulsion. The ITB serves as a secondary combustor and is located between the high- and the low-pressure turbine, i.e., the transition duct. The objective of this study is to use design parameters, such as flight Mach number, compressor pressure ratio, fan pressure ratio, fan bypass ratio, and high-pressure turbine inlet temperature to obtain engine performance parameters, such as specific thrust and thrust specific fuel consumption. Results of this study can provide guidance in identifying the performance characteristics of various engine components, which can then be used to develop, analyze, integrate, and optimize the system performance of turbofan engines with an ITB. Visual Basic program, Microsoft Excel macrocode, and Microsoft Excel neuron code are used to facilitate Microsoft Excel software to plot engine performance versus engine design parameters. This program computes and plots the data sequentially without forcing users to open other types of plotting programs. A user s manual on how to use the program is also included in this report. Furthermore, this stand-alone program is written in conjunction with an off-design program which is an extension of this study. The computed result of a selected design-point engine will be exported to an engine reference data file that is required in off-design calculation.

[Establishment and management of electronic appointment library for dental implant patients].

PubMed

Dong, Zheng-jie; Xu, Kan

2013-10-01

To design an excel form which can prompt dental implant patient appointment through color change, which can scientifically manage implant EMR library through appropriate interlinkage and number. An excel form based on operating system Windows XP was designed and software 2003 Microsoft excel was used, which was configured to change color with the passage of time by the use of command "conditional format". An excel form was designed. The color turned to red automatically on the day the patient underwent implant surgery. It turned to yellow when the patient recalled 2 weeks after the first operation, to green when the patient underwent secondary operation. It was designed to be gray when all the procedures of implant restoration was finished. In addition, we could know patients' main implant situation through directly opening his EMR when clicking on his name or number. Dentists can remind the implant patient appointment schedule through color change of an excel form, and can consult the implant patient EMR directly through interlinkage or number.

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel: III. Convolution and deconvolution.

PubMed

Langenbucher, Frieder

2003-11-01

Convolution and deconvolution are the classical in-vitro-in-vivo correlation tools to describe the relationship between input and weighting/response in a linear system, where input represents the drug release in vitro, weighting/response any body response in vivo. While functional treatment, e.g. in terms of polyexponential or Weibull distribution, is more appropriate for general survey or prediction, numerical algorithms are useful for treating actual experimental data. Deconvolution is not considered an algorithm by its own, but the inversion of a corresponding convolution. MS Excel is shown to be a useful tool for all these applications.

Truke, a web tool to check for and handle excel misidentified gene symbols.

PubMed

Mallona, Izaskun; Peinado, Miguel A

2017-03-21

Genomic datasets accompanying scientific publications show a surprisingly high rate of gene name corruption. This error is generated when files and tables are imported into Microsoft Excel and certain gene symbols are automatically converted into dates. We have developed Truke, a fexible Web tool to detect, tag and fix, if possible, such misconversions. Aside, Truke is language and regional locale-aware, providing file format customization (decimal symbol, field sepator, etc.) following user's preferences. Truke is a data format conversion tool with a unique corrupted gene symbol detection utility. Truke is freely available without registration at http://maplab.cat/truke .

Summary of Expansions, Updates, and Results in GREET 2017 Suite of Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Michael; Elgowainy, Amgad; Han, Jeongwoo

This report provides a technical summary of the expansions and updates to the 2017 release of Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET®) model, including references and links to key technical documents related to these expansions and updates. The GREET 2017 release includes an updated version of the GREET1 (the fuel-cycle GREET model) and GREET2 (the vehicle-cycle GREET model), both in the Microsoft Excel platform and in the GREET.net modeling platform. Figure 1 shows the structure of the GREET Excel modeling platform. The .net platform integrates all GREET modules together seamlessly.

Development Biology Worksheet Oriented Accelerated Learning on Plantae and Ecosystems for 10th-Grade Senior High School Students

NASA Astrophysics Data System (ADS)

Dipuja, D. A.; Lufri, L.; Ahda, Y.

2018-04-01

The problem that found are learning outcomes student is low on the plantae and ecosystems. Students less motivated and passive learning because learning is teacher center and teaching materials not facilitate student. Therefore, it is necessary to design a worksheet oriented accelerated learning. Accelerated learning approach that can improve motivation and learning activities. The purpose of the research was to produce worksheet oriented accelerated learning on plantae and ecosystems. This research is designed as a research and development by using Plomp model, consists of the preliminary, prototyping, and assessment phase. Data was collected through questionnaires, observation sheet, test, and documentation. The results of the research was worksheet oriented accelerated learning on plantae and ecosystems is very valid.

A Trainee Demand Analysis for the Expansion of the Marine Corps Embassy Security Group

DTIC Science & Technology

2013-03-01

156 163 )l 2014 )l )l 163 180 )l 2015 )l X 18{1 195 X 2016 )l X 195 210 X 2017 )l X .210 210 X 2018 1t )l 210 210 )l 2019 )l )l 110 210 )l 2010...website: http://www.mcesg.marines.mil/About/MCESGMission Walkenbach, J. (2010). Microsoft Excel 2010 bible . Indianapolis, IN: Wiley Wang, J., Egudo, R

WestPro: a computer program for simulating uneven-aged Douglas-fir stand growth and yield in the Pacific Northwest.

Treesearch

Rebecca Ralston; Joseph Buongiorno; Benedict Schulte; Jeremy Fried

2003-01-01

WestPro is an add-in program designed to work with Microsoft Excel to simulate the growth of uneven-aged Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) stands in the Pacific Northwest region of the United States. Given the initial stand state, defined as the number of softwood and hardwood trees per acre by diameter class, WestPro predicts the...

CalPro: a spreadsheet program for the management of California mixed-conifer stands.

Treesearch

Jingjing Liang; Joseph Buongiorno; Robert A. Monserud

2004-01-01

CalPro is an add-in program developed to work with Microsoft Excel to simulate the growth and management of uneven-aged mixed-conifer stands in California. Its built-in growth model was calibrated from 177 uneven-aged plots on industry and other private lands. Stands are described by the number of trees per acre in each of nineteen 2-inch diameter classes in...

Global History. A Curriculum Guide. Third Semester. Theme VIII: Economic, Political, and Cultural Changes in the Post-War World Affect Our Lives Today. Student Worksheets. Experimental Edition.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

This packet of worksheets and articles was developed for use by secondary school students in the New York City public schools. It is part of a three semester, eight theme global history course. These worksheets cover the theme "Economic, Political, and Cultural Changes in the Post-War World Affect Our Lives Today" and are intended for use in…

Preliminary In-Flight Loads Analysis of In-Line Launch Vehicles using the VLOADS 1.4 Program

NASA Technical Reports Server (NTRS)

Graham, J. B.; Luz, P. L.

1998-01-01

To calculate structural loads of in-line launch vehicles for preliminary design, a very useful computer program is VLOADS 1.4. This software may also be used to calculate structural loads for upper stages and planetary transfer vehicles. Launch vehicle inputs such as aerodynamic coefficients, mass properties, propellants, engine thrusts, and performance data are compiled and analyzed by VLOADS to produce distributed shear loads, bending moments, axial forces, and vehicle line loads as a function of X-station along the vehicle's length. Interface loads, if any, and translational accelerations are also computed. The major strength of the software is that it enables quick turnaround analysis of structural loads for launch vehicles during the preliminary design stage of its development. This represents a significant improvement over the alternative-the time-consuming, and expensive chore of developing finite element models. VLOADS was developed as a Visual BASIC macro in a Microsoft Excel 5.0 work book on a Macintosh. VLOADS has also been implemented on a PC computer using Microsoft Excel 7.0a for Windows 95. VLOADS was developed in 1996, and the current version was released to COSMIC, NASA's Software Technology Transfer Center, in 1997. The program is a copyrighted work with all copyright vested in NASA.

Adding glycaemic index and glycaemic load functionality to DietPLUS, a Malaysian food composition database and diet intake calculator.

PubMed

Shyam, Sangeetha; Wai, Tony Ng Kock; Arshad, Fatimah

2012-01-01

This paper outlines the methodology to add glycaemic index (GI) and glycaemic load (GL) functionality to food DietPLUS, a Microsoft Excel-based Malaysian food composition database and diet intake calculator. Locally determined GI values and published international GI databases were used as the source of GI values. Previously published methodology for GI value assignment was modified to add GI and GL calculators to the database. Two popular local low GI foods were added to the DietPLUS database, bringing up the total number of foods in the database to 838 foods. Overall, in relation to the 539 major carbohydrate foods in the Malaysian Food Composition Database, 243 (45%) food items had local Malaysian values or were directly matched to International GI database and another 180 (33%) of the foods were linked to closely-related foods in the GI databases used. The mean ± SD dietary GI and GL of the dietary intake of 63 women with previous gestational diabetes mellitus, calculated using DietPLUS version3 were, 62 ± 6 and 142 ± 45, respectively. These values were comparable to those reported from other local studies. DietPLUS version3, a simple Microsoft Excel-based programme aids calculation of diet GI and GL for Malaysian diets based on food records.

A Comparison of Four Software Programs for Implementing Decision Analytic Cost-Effectiveness Models.

PubMed

Hollman, Chase; Paulden, Mike; Pechlivanoglou, Petros; McCabe, Christopher

2017-08-01

The volume and technical complexity of both academic and commercial research using decision analytic modelling has increased rapidly over the last two decades. The range of software programs used for their implementation has also increased, but it remains true that a small number of programs account for the vast majority of cost-effectiveness modelling work. We report a comparison of four software programs: TreeAge Pro, Microsoft Excel, R and MATLAB. Our focus is on software commonly used for building Markov models and decision trees to conduct cohort simulations, given their predominance in the published literature around cost-effectiveness modelling. Our comparison uses three qualitative criteria as proposed by Eddy et al.: "transparency and validation", "learning curve" and "capability". In addition, we introduce the quantitative criterion of processing speed. We also consider the cost of each program to academic users and commercial users. We rank the programs based on each of these criteria. We find that, whilst Microsoft Excel and TreeAge Pro are good programs for educational purposes and for producing the types of analyses typically required by health technology assessment agencies, the efficiency and transparency advantages of programming languages such as MATLAB and R become increasingly valuable when more complex analyses are required.

Developing Guided Worksheet for Cognitive Apprenticeship Approach in teaching Formal Definition of The Limit of A Function

NASA Astrophysics Data System (ADS)

Oktaviyanthi, R.; Dahlan, J. A.

2018-04-01

This study aims to develop student worksheets that correspond to the Cognitive Apprenticeship learning approach. The main subject in this student worksheet is Functions and Limits with the branch of the main subject is Continuity and Limits of Functions. There are two indicators of the achievement of this learning that are intended to be developed in the student worksheet (1) the student can explain the concept of limit by using the formal definition of limit and (2) the student can evaluate the value of limit of a function using epsilon and delta. The type of research used is development research that refers to the development of Plomp products. The research flow starts from literature review, observation, interviews, work sheet design, expert validity test, and limited trial on first-year students in academic year 2016-2017 in Universitas Serang Raya, STKIP Pelita Pratama Al-Azhar Serang, and Universitas Mathla’ul Anwar Pandeglang. Based on the product development result obtained the student worksheets that correspond to the Cognitive Apprenticeship learning approach are valid and reliable.

MELTS_Excel: A Microsoft Excel-based MELTS interface for research and teaching of magma properties and evolution

NASA Astrophysics Data System (ADS)

Gualda, Guilherme A. R.; Ghiorso, Mark S.

2015-01-01

thermodynamic modeling software MELTS is a powerful tool for investigating crystallization and melting in natural magmatic systems. Rhyolite-MELTS is a recalibration of MELTS that better captures the evolution of silicic magmas in the upper crust. The current interface of rhyolite-MELTS, while flexible, can be somewhat cumbersome for the novice. We present a new interface that uses web services consumed by a VBA backend in Microsoft Excel©. The interface is contained within a macro-enabled workbook, where the user can insert the model input information and initiate computations that are executed on a central server at OFM Research. Results of simple calculations are shown immediately within the interface itself. It is also possible to combine a sequence of calculations into an evolutionary path; the user can input starting and ending temperatures and pressures, temperature and pressure steps, and the prevailing oxidation conditions. The program shows partial updates at every step of the computations; at the conclusion of the calculations, a series of data sheets and diagrams are created in a separate workbook, which can be saved independently of the interface. Additionally, the user can specify a grid of temperatures and pressures and calculate a phase diagram showing the conditions at which different phases are present. The interface can be used to apply the rhyolite-MELTS geobarometer. We demonstrate applications of the interface using an example early-erupted Bishop Tuff composition. The interface is simple to use and flexible, but it requires an internet connection. The interface is distributed for free from http://melts.ofm-research.org.

Part 10: Pediatric Basic and Advanced Life Support 2010 International Consensus on Cardiopulmonary Resuscitation and Emergency Cardiovascular Care Science With Treatment Recommendations

PubMed Central

Kleinman, Monica E.; de Caen, Allan R.; Chameides, Leon; Atkins, Dianne L.; Berg, Robert A.; Berg, Marc D.; Bhanji, Farhan; Biarent, Dominique; Bingham, Robert; Coovadia, Ashraf H.; Hazinski, Mary Fran; Hickey, Robert W.; Nadkarni, Vinay M.; Reis, Amelia G.; Rodriguez-Nunez, Antonio; Tibballs, James; Zaritsky, Arno L.; Zideman, David

2013-01-01

Note From the Writing Group: Throughout this article, the reader will notice combinations of superscripted letters and numbers (eg, “Family Presence During ResuscitationPeds-003”). These callouts are hyperlinked to evidence-based worksheets, which were used in the development of this article. An appendix of worksheets, applicable to this article, is located at the end of the text. The worksheets are available in PDF format and are open access. PMID:20956258

GLobal Integrated Design Environment (GLIDE): A Concurrent Engineering Application

NASA Technical Reports Server (NTRS)

McGuire, Melissa L.; Kunkel, Matthew R.; Smith, David A.

2010-01-01

The GLobal Integrated Design Environment (GLIDE) is a client-server software application purpose-built to mitigate issues associated with real time data sharing in concurrent engineering environments and to facilitate discipline-to-discipline interaction between multiple engineers and researchers. GLIDE is implemented in multiple programming languages utilizing standardized web protocols to enable secure parameter data sharing between engineers and researchers across the Internet in closed and/or widely distributed working environments. A well defined, HyperText Transfer Protocol (HTTP) based Application Programming Interface (API) to the GLIDE client/server environment enables users to interact with GLIDE, and each other, within common and familiar tools. One such common tool, Microsoft Excel (Microsoft Corporation), paired with its add-in API for GLIDE, is discussed in this paper. The top-level examples given demonstrate how this interface improves the efficiency of the design process of a concurrent engineering study while reducing potential errors associated with manually sharing information between study participants.

Geologic Field Notes, Geochemical Analyses, and Field Photographs of Outcrops and Rock Samples from the Big Delta B-1 Quadrangle, East-Central Alaska

USGS Publications Warehouse

Day, Warren C.; O'Neill, J. Michael

2008-01-01

The U.S. Geological Survey, in cooperation with the Alaska Department of Natural Resources Division of Mining, Land, and Water, has released a geologic map of the Big Delta B-1 quadrangle of east-central Alaska (Day and others, 2007). This companion report presents the major element oxide and trace element geochemical analyses, including those for gold, silver, and base metals, for representative rock units and for grab samples from quartz veins and mineralized zones within the quadrangle. Also included are field station locations, field notes, structural data, and field photographs based primarily on observations by W.C. Day with additions by J.M. O'Neill and B.M. Gamble, all of the U.S. Geological Survey. The data are provided in both Microsoft Excel spread sheet format and as a Microsoft Access database.

Shear bond strength in zirconia veneered ceramics using two different surface treatments prior veneering.

PubMed

Gasparić, Lana Bergman; Schauperl, Zdravko; Mehulić, Ketij

2013-03-01

Aim of the study was to assess the effect of different surface treatments on the shear bond strength (SBS) of the veneering ceramics to zirconia core. In a shear test the influence of grinding and sandblasting of the zirconia surface on bonding were assessed. Statistical analysis was performed using SPSS statistical package (version 17.0, SPSS Inc., Chicago, IL, USA) and Microsoft Office Excel 2003 (Microsoft, Seattle, WA, USA). There was a significant difference between the groups considering shear bond strength (SBS) values, i.e. ground and sandblasted samples had significantly higher SBS values than only ground samples (mean difference = -190.67; df = 10, t = -6.386, p < 0.001). The results of the present study indicate that ground and sandblasted cores are superior to ground cores, allowing significantly higher surface roughness and significantly higher shear bond strength between the core and the veneering material.

ExcelAutomat: a tool for systematic processing of files as applied to quantum chemical calculations

NASA Astrophysics Data System (ADS)

Laloo, Jalal Z. A.; Laloo, Nassirah; Rhyman, Lydia; Ramasami, Ponnadurai

2017-07-01

The processing of the input and output files of quantum chemical calculations often necessitates a spreadsheet as a key component of the workflow. Spreadsheet packages with a built-in programming language editor can automate the steps involved and thus provide a direct link between processing files and the spreadsheet. This helps to reduce user-interventions as well as the need to switch between different programs to carry out each step. The ExcelAutomat tool is the implementation of this method in Microsoft Excel (MS Excel) using the default Visual Basic for Application (VBA) programming language. The code in ExcelAutomat was adapted to work with the platform-independent open-source LibreOffice Calc, which also supports VBA. ExcelAutomat provides an interface through the spreadsheet to automate repetitive tasks such as merging input files, splitting, parsing and compiling data from output files, and generation of unique filenames. Selected extracted parameters can be retrieved as variables which can be included in custom codes for a tailored approach. ExcelAutomat works with Gaussian files and is adapted for use with other computational packages including the non-commercial GAMESS. ExcelAutomat is available as a downloadable MS Excel workbook or as a LibreOffice workbook.

ExcelAutomat: a tool for systematic processing of files as applied to quantum chemical calculations.

PubMed

Laloo, Jalal Z A; Laloo, Nassirah; Rhyman, Lydia; Ramasami, Ponnadurai

2017-07-01

The processing of the input and output files of quantum chemical calculations often necessitates a spreadsheet as a key component of the workflow. Spreadsheet packages with a built-in programming language editor can automate the steps involved and thus provide a direct link between processing files and the spreadsheet. This helps to reduce user-interventions as well as the need to switch between different programs to carry out each step. The ExcelAutomat tool is the implementation of this method in Microsoft Excel (MS Excel) using the default Visual Basic for Application (VBA) programming language. The code in ExcelAutomat was adapted to work with the platform-independent open-source LibreOffice Calc, which also supports VBA. ExcelAutomat provides an interface through the spreadsheet to automate repetitive tasks such as merging input files, splitting, parsing and compiling data from output files, and generation of unique filenames. Selected extracted parameters can be retrieved as variables which can be included in custom codes for a tailored approach. ExcelAutomat works with Gaussian files and is adapted for use with other computational packages including the non-commercial GAMESS. ExcelAutomat is available as a downloadable MS Excel workbook or as a LibreOffice workbook.

The development of a tool for assessing the quality of closed circuit camera footage for use in forensic gait analysis.

PubMed

Birch, Ivan; Vernon, Wesley; Walker, Jeremy; Saxelby, Jai

2013-10-01

Gait analysis from closed circuit camera footage is now commonly used as evidence in criminal trials. The biomechanical analysis of human gait is a well established science in both clinical and laboratory settings. However, closed circuit camera footage is rarely of the quality of that taken in the more controlled clinical and laboratory environments. The less than ideal quality of much of this footage for use in gait analysis is associated with a range of issues, the combination of which can often render the footage unsuitable for use in gait analysis. The aim of this piece of work was to develop a tool for assessing the suitability of closed circuit camera footage for the purpose of forensic gait analysis. A Delphi technique was employed with a small sample of expert forensic gait analysis practitioners, to identify key quality elements of CCTV footage used in legal proceedings. Five elements of the footage were identified and then subdivided into 15 contributing sub-elements, each of which was scored using a 5-point Likert scale. A Microsoft Excel worksheet was developed to calculate automatically an overall score from the fifteen sub-element scores. Five expert witnesses experienced in using CCTV footage for gait analysis then trialled the prototype tool on current case footage. A repeatability study was also undertaken using standardized CCTV footage. The results showed the tool to be a simple and repeatable means of assessing the suitability of closed circuit camera footage for use in forensic gait analysis. The inappropriate use of poor quality footage could lead to challenges to the practice of forensic gait analysis. All parties involved in criminal proceedings must therefore understand the fitness for purpose of any footage used. The development of this tool could offer a method of achieving this goal, and help to assure the continued role of forensic gait analysis as an aid to the identification process. Copyright © 2013 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Automated model integration at source code level: An approach for implementing models into the NASA Land Information System

NASA Astrophysics Data System (ADS)

Wang, S.; Peters-Lidard, C. D.; Mocko, D. M.; Kumar, S.; Nearing, G. S.; Arsenault, K. R.; Geiger, J. V.

2014-12-01

Model integration bridges the data flow between modeling frameworks and models. However, models usually do not fit directly into a particular modeling environment, if not designed for it. An example includes implementing different types of models into the NASA Land Information System (LIS), a software framework for land-surface modeling and data assimilation. Model implementation requires scientific knowledge and software expertise and may take a developer months to learn LIS and model software structure. Debugging and testing of the model implementation is also time-consuming due to not fully understanding LIS or the model. This time spent is costly for research and operational projects. To address this issue, an approach has been developed to automate model integration into LIS. With this in mind, a general model interface was designed to retrieve forcing inputs, parameters, and state variables needed by the model and to provide as state variables and outputs to LIS. Every model can be wrapped to comply with the interface, usually with a FORTRAN 90 subroutine. Development efforts need only knowledge of the model and basic programming skills. With such wrappers, the logic is the same for implementing all models. Code templates defined for this general model interface could be re-used with any specific model. Therefore, the model implementation can be done automatically. An automated model implementation toolkit was developed with Microsoft Excel and its built-in VBA language. It allows model specifications in three worksheets and contains FORTRAN 90 code templates in VBA programs. According to the model specification, the toolkit generates data structures and procedures within FORTRAN modules and subroutines, which transfer data between LIS and the model wrapper. Model implementation is standardized, and about 80 - 90% of the development load is reduced. In this presentation, the automated model implementation approach is described along with LIS programming interfaces, the general model interface and five case studies, including a regression model, Noah-MP, FASST, SAC-HTET/SNOW-17, and FLake. These different models vary in complexity with software structure. Also, we will describe how these complexities were overcome through using this approach and results of model benchmarks within LIS.

Validation Test Report For The CRWMS Analysis and Logistics Visually Interactive Model Calvin Version 3.0, 10074-Vtr-3.0-00

DOE Office of Scientific and Technical Information (OSTI.GOV)

S. Gillespie

2000-07-27

This report describes the tests performed to validate the CRWMS ''Analysis and Logistics Visually Interactive'' Model (CALVIN) Version 3.0 (V3.0) computer code (STN: 10074-3.0-00). To validate the code, a series of test cases was developed in the CALVIN V3.0 Validation Test Plan (CRWMS M&O 1999a) that exercises the principal calculation models and options of CALVIN V3.0. Twenty-five test cases were developed: 18 logistics test cases and 7 cost test cases. These cases test the features of CALVIN in a sequential manner, so that the validation of each test case is used to demonstrate the accuracy of the input to subsequentmore » calculations. Where necessary, the test cases utilize reduced-size data tables to make the hand calculations used to verify the results more tractable, while still adequately testing the code's capabilities. Acceptance criteria, were established for the logistics and cost test cases in the Validation Test Plan (CRWMS M&O 1999a). The Logistics test cases were developed to test the following CALVIN calculation models: Spent nuclear fuel (SNF) and reactivity calculations; Options for altering reactor life; Adjustment of commercial SNF (CSNF) acceptance rates for fiscal year calculations and mid-year acceptance start; Fuel selection, transportation cask loading, and shipping to the Monitored Geologic Repository (MGR); Transportation cask shipping to and storage at an Interim Storage Facility (ISF); Reactor pool allocation options; and Disposal options at the MGR. Two types of cost test cases were developed: cases to validate the detailed transportation costs, and cases to validate the costs associated with the Civilian Radioactive Waste Management System (CRWMS) Management and Operating Contractor (M&O) and Regional Servicing Contractors (RSCs). For each test case, values calculated using Microsoft Excel 97 worksheets were compared to CALVIN V3.0 scenarios with the same input data and assumptions. All of the test case results compare with the CALVIN V3.0 results within the bounds of the acceptance criteria. Therefore, it is concluded that the CALVIN V3.0 calculation models and options tested in this report are validated.« less

Assessment of non-invasive models for liver fibrosis in chronic hepatitis B virus related liver disease patients in resource limited settings.

PubMed

Shrivastava, Rakesh; Sen, Sourav; Banerji, Debabrata; Praharaj, Ashok K; Chopra, Gurvinder Singh; Gill, Satyajit Singh

2013-01-01

A total of 350 million individuals are affected by chronic hepatitis B virus infection world-wide. Historically, liver biopsy has been instrumental in adequately assessing patients with chronic liver disease. A number of non-invasive models have been studied world-wide. The aim of this study is to assess the utility of non-invasive mathematical models of liver fibrosis in chronic hepatitis B (CHB). Indian patients in a resource limited setting using routinely performed non-invasive laboratory investigations. A cross-sectional study carried out at a tertiary care center. A total of 52 consecutive chronic liver disease patients who underwent percutaneous liver biopsy and 25 healthy controls were enrolled in the study. Routine laboratory investigations included serum aspartate aminotransferase (AST), Alanine aminotransferase (ALT), Gama glutamyl transpeptidase (GGT), total bilirubin, total cholesterol, prothrombin time and platelet count. Three non-invasive models for namely aspartate aminotransferase to platelet ratio index (APRI), Fibrosis 4 (FIB-4) and Forn's index were calculated. Outcomes were compared for the assessment of best predictor of fibrosis by calculating the sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) of each index. Medcalc online software and by Microsoft Excel Worksheet. Chi-square test was used for significance. P value < 0.05 was taken as significant. While the serum levels of AST, ALT and GGT were significantly higher in patients group as compare with the healthy controls (P < 0.01), the platelet counts were significantly lower in patient group as compared to the control group (P < 0.01). Mean value of all 3 indices were significantly higher in patients group as compare with the controls (P < 0.01). Out of the three indices, APRI index with a NPV of 95% appeared to be a better model for excluding significant liver fibrosis while FIB-4 with a PPV of 61% showed fair correlation with significant fibrosis. Thus, these two non-invasive models for predicting of liver fibrosis, namely APRI and FIB-4, can be utilized in combination as screening tools in monitoring of CHB patients, especially in resource limiting settings.

Development of a Genetic Algorithm to Automate Clustering of a Dependency Structure Matrix

NASA Technical Reports Server (NTRS)

Rogers, James L.; Korte, John J.; Bilardo, Vincent J.

2006-01-01

Much technology assessment and organization design data exists in Microsoft Excel spreadsheets. Tools are needed to put this data into a form that can be used by design managers to make design decisions. One need is to cluster data that is highly coupled. Tools such as the Dependency Structure Matrix (DSM) and a Genetic Algorithm (GA) can be of great benefit. However, no tool currently combines the DSM and a GA to solve the clustering problem. This paper describes a new software tool that interfaces a GA written as an Excel macro with a DSM in spreadsheet format. The results of several test cases are included to demonstrate how well this new tool works.

Enhancement of students’ creative thinking skills on mixture separation topic using project based student worksheet

NASA Astrophysics Data System (ADS)

Nurisalfah, R.; Fadiawati, N.; Jalmo, T.

2018-05-01

The aim of this study is to describe the effectiveness of project based student worksheet in improving students' creative thinking skills. The research method is using quasi experiment with the matching only pre-test post-test control group design. The population in this research is all students of class VII SMP N 2 Belitang Madang Raya with class VII1 as control class and class VII4 as experiment class. The sample of this research is obtaining by purposive sampling technique. The effectiveness of project based student worksheet is based on significant post-test differences between the control class and the experiment class as well as the effect size. The results show that the using of project based student worksheet is effective in improving students' creative thinking skills on mixture separation topic.

Moving Business and Marketing Education into the 21st Century. Proceedings of the Annual Meeting of the Atlantic Coast Business and Marketing Education Conference (17th, Raleigh, North Carolina, February 18-19, 2000).

ERIC Educational Resources Information Center

Parke, David, Ed.

This document contains 21 presentations from a conference on business and marketing education. The following papers are included: "Microsoft Excel 2000" (Jeff Fuller); "Clueless in the Classroom? Hints To Help!" (Mary W. Evans); "A Strategy To Improve Narrative-Number Linkage in Business Writing" (Ellis A. Hayes);…

Determining Binary Star Orbits Using Kepler's Equation

NASA Astrophysics Data System (ADS)

Boule, Cory; Andrews, Kaitlyn; Penfield, Andrew; Puckette, Ian; Goodale, Keith; Harfenist, Steven

2017-04-01

Students calculated ephemerides and generated orbits of four well-known binary systems. Using an iterative technique in Microsoft® Excel® to solve Kepler's equation, separation and position angle values were generated as well as plots of the apparent orbits. Current position angle and separation values were measured in the field and compared well to the calculated values for the stars: STF1196AB,C, STF296AB, STF296AB and STF60AB.

Future Automotive Systems Technology Simulator (FASTSim)

DOE Office of Scientific and Technical Information (OSTI.GOV)

An advanced vehicle powertrain systems analysis tool, the Future Automotive Systems Technology Simulator (FASTSim) provides a simple way to compare powertrains and estimate the impact of technology improvements on light-, medium- and heavy-duty vehicle efficiency, performance, cost, and battery life. Created by the National Renewable Energy Laboratory, FASTSim accommodates a range of vehicle types - including conventional vehicles, electric-drive vehicles, and fuel cell vehicles - and is available for free download in Microsoft Excel and Python formats.

WestProPlus: a stochastic spreadsheet program for the management of all-aged Douglas-fir–hemlock forests in the Pacific Northwest.

Treesearch

Jingjing Liang; Joseph Buongiorno; Robert A. Monserud

2006-01-01

WestProPlus is an add-in program developed to work with Microsoft Excel to simulate the growth and management of all-aged Douglas-fir–western hemlock (Pseudotsuga menziesii (Mirb.) Franco–Tsuga heterophylla (Raf.) Sarg.) stands in Oregon and Washington. Its built-in growth model was calibrated from 2,706 permanent plots in the...

Using a Spreadsheet to Solve the Schro¨dinger Equations for the Energies of the Ground Electronic State and the Two Lowest Excited States of H[subscript2

ERIC Educational Resources Information Center

Ge, Yingbin; Rittenhouse, Robert C.; Buchanan, Jacob C.; Livingston, Benjamin

2014-01-01

We have designed an exercise suitable for a lab or project in an undergraduate physical chemistry course that creates a Microsoft Excel spreadsheet to calculate the energy of the S[subscript 0] ground electronic state and the S[subscript 1] and T[subscript 1] excited states of H[subscript 2]. The spreadsheet calculations circumvent the…

Improving the Cost Efficiency and Readiness of MC-130 Aircrew Training: A Case Study

DTIC Science & Technology

2015-01-01

51 Jiang, Changbing, "A reliable solver of Euclidean traveling salesman problems with Microsoft excel add-in tools for small-size systems...DisplayPage.aspx?DocType=Reference&ItemId=+++1 343364&Pubabbrev=JAWA 124 Jiang, Changbing, "A Reliable Solver of Euclidean Traveling Salesman Problems with...49 Figure 4.5 Training Resources Locations Traveling Salesperson Problem In order to participate in training, aircrews must fly to the

Component, Context and Manufacturing Model Library (C2M2L)

DTIC Science & Technology

2013-03-01

Penn State team were stored in a relational database for easy access, storage and maintainability. The relational database consisted of a PostGres ...file into a format that can be imported into the PostGres database. This same custom application was used to generate Microsoft Excel templates...Press Break Forming Equipment 4.14 Manufacturing Model Library Database Structure The data storage mechanism for the ARL PSU MML was a PostGres database

Variations the diameter tip of electrode on the resistance spot welding using electrode Cu on worksheet Fe

NASA Astrophysics Data System (ADS)

Baskoro, A. S.; Sugeng, S.; Sifa, Agus; Badruzzaman; Endramawan, Tito

2018-04-01

Resistance Spot Weld (RSW) is a welding technology which plays an important role that is often used in industry in large manufacturing industries, especially in the automotive sector, some of the parameters are affecting the welding process that give impact in the weld quality, diameter tip important impact on the resistance spot welding, This study can be categorized as experimental study by using Electrode material such as Cu and Fe Worksheet Materials, with a material thickness of 1 mm,0,8 mm, and 0,6 mm on each worksheet, and the large diameter of tip electrode (5√t) depend on the thickness of worksheet. Testing the material in the electrode and the worksheet by testing the composition and tensile test, and the hardness of the material used are to know the material used certainly. The result of the welding process was done by using the parameters voltage of 8KV, with a duty cycle of 50% using a variation of the time 8s-10s, and variations the electrode tip diameter that are affected by the thickness of the worksheet 5\\sqrt{t}, plate thickness used 1 mm, 0,8 mm and 0,6 mm, so that the electrodes was used to a thickness of 1 mm diameter tip electrode 5 mm, thickness 0,8 mm with an electrode tip diameter 4,5 mm and a thickness 0,6 mm with an electrode diameter of 4 mm, with current welding parameter 8kVA, and variations in holding time 10s, 9s and 8s 50% duty cycle, then testing welds with the standard shear test refers ASTM A370-2012 with more results to a thickness of 0,6 has the ability to withstand greater load on the holding time 8s and 9s, 10s, to a thickness 0,8 mm and 1 mm shear test results demonstrate the ability to withstand loads on the holding time of 10s and 9s have a greater ability than 8s on worksheet that has thickness 1 mm at a holding time of 10s, and then Maximum shear test averaging of 36,41 N at a worksheet with a thickness of 0,8 mm (diameter tip 4,5 mm) at a holding time of 8s and a mean minimum shear stress of 23,73 N at worksheet that has thickness 0,6 mm (diameter tip 4 mm).

Identification of the Thickness of Nugget on Worksheet Spot Welding Using Non Destructive Test (NDT) - Effect of Pressure

NASA Astrophysics Data System (ADS)

Sifa, A.; Baskoro, A. S.; Sugeng, S.; Badruzzaman, B.; Endramawan, T.

2018-02-01

Resistance Spot Welding (RSW) is a process of connecting between two worksheet with thermomechanical loading process, RSW is widely used in automotive industry, the quality of splicing spot welding is influenced by several factors. One of the factors at the time of the welding process is pressure. The quality of welding on the nuggets can be determined by undertaking non-destructive testing by using Non Destructive Test (NDT) - Ultrasonic Test. In the NDT test is done by detecting the thickness of the nugget area, the purpose of research conducted to determine the effect of pressure to welding quality with Nugget thickness gauge measurement with Non Destructive Test method and manual measurement with micrometer, Experimental welding process by entering the welding parameters that have been specified and pressure variables 1 -5 bars on the worksheet thickness of 1 mm. The results of testing with NDT show there is addition of thickness in nugget superiority after compare with measurement result of thickness of nugget with micrometer which slightly experience thickness in nugget area, this indicates that the welding results have a connection between worksheet 1 and worksheet 2.

Assessing student clinical learning experiences.

PubMed

Nehyba, Katrine; Miller, Susan; Connaughton, Joanne; Singer, Barbara

2017-08-01

This article describes the use of an activity worksheet and questionnaire to investigate the learning experience of students on clinical placement. The worksheet measures the amount of time students spend in different learning activities, and the questionnaire explores student satisfaction and preferred learning activities. An activity worksheet and questionnaire … investigate[d] the learning experiences of students on clinical placement METHODS: The activity worksheet and questionnaire were used in a cohort pilot study of physiotherapy students on clinical placement. The activity worksheet provides details of the amount of time students engage in a range of clinical and non-clinical tasks while on placement, such as time spent treating patients, working individually, working with their peers and engaging in reflective practice. In combination with the questionnaire results, it allows clinicians to gain an understanding of the clinical learning environment experienced by their students. The data collected using these tools provide a description of the students' activities while undertaking the clinical placement. This information may guide the refinement of the clinical experience, and offers an opportunity to individualise learning activities to match students' needs and preferences. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Experimental and Numerical Investigations of Applying Tip-bottomed Tool for Bending Advanced Ultra-high Strength Steel Sheet

NASA Astrophysics Data System (ADS)

Mitsomwang, Pusit; Borrisutthekul, Rattana; Klaiw-awoot, Ken; Pattalung, Aran

2017-09-01

This research was carried out aiming to investigate the application of a tip-bottomed tool for bending an advanced ultra-high strength steel sheet. The V-die bending experiment of a dual phase steel (DP980) sheet which had a thickness of 1.6 mm was executed using a conventional bending and a tip-bottomed punches. Experimental results revealed that the springback of the bent worksheet in the case of the tip-bottomed punch was less than that of the conventional punch case. To further discuss bending characteristics, a finite element (FE) model was developed and used to simulate the bending of the worksheet. From the FE analysis, it was found that the application of the tip-bottomed punch contributed the plastic deformation to occur at the bending region. Consequently, the springback of the worksheet reduced. In addition, the width of the punch tip was found to affect the deformation at the bending region and determined the springback of the bent worksheet. Moreover, the use of the tip-bottomed punch resulted in the apparent increase of the surface hardness of the bent worksheet, compared to the bending with the conventional punch.

ARS-Media for Excel: A Spreadsheet Tool for Calculating Media Recipes Based on Ion-Specific Constraints.

PubMed

Niedz, Randall P

2016-01-01

ARS-Media for Excel is an ion solution calculator that uses "Microsoft Excel" to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Excel's Solver add-on solves the linear programming equation to generate a recipe. Calculating a mixture of salts to generate exact solutions of complex ionic mixtures is required for at least 2 types of problems- 1) formulating relevant ecological/biological ionic solutions such as those from a specific lake, soil, cell, tissue, or organ and, 2) designing ion confounding-free experiments to determine ion-specific effects where ions are treated as statistical factors. Using ARS-Media for Excel to solve these two problems is illustrated by 1) exactly reconstructing a soil solution representative of a loamy agricultural soil and, 2) constructing an ion-based experiment to determine the effects of substituting Na+ for K+ on the growth of a Valencia sweet orange nonembryogenic cell line.

Validity of worksheet-based guided inquiry and mind mapping for training students’ creative thinking skills

NASA Astrophysics Data System (ADS)

Susanti, L. B.; Poedjiastoeti, S.; Taufikurohmah, T.

2018-04-01

The purpose of this study is to explain the validity of guided inquiry and mind mapping-based worksheet that has been developed in this study. The worksheet implemented the phases of guided inquiry teaching models in order to train students’ creative thinking skills. The creative thinking skills which were trained in this study included fluency, flexibility, originality and elaboration. The types of validity used in this study included content and construct validity. The type of this study is development research with Research and Development (R & D) method. The data of this study were collected using review and validation sheets. Sources of the data were chemistry lecturer and teacher. The data is the analyzed descriptively. The results showed that the worksheet is very valid and could be used as a learning media with the percentage of validity ranged from 82.5%-92.5%.

Tutorial: simulating chromatography with Microsoft Excel Macros.

PubMed

Kadjo, Akinde; Dasgupta, Purnendu K

2013-04-22

Chromatography is one of the cornerstones of modern analytical chemistry; developing an instinctive feeling for how chromatography works will be invaluable to future generation of chromatographers. Specialized software programs exist that handle and manipulate chromatographic data; there are also some that simulate chromatograms. However, the algorithm details of such software are not transparent to a beginner. In contrast, how spreadsheet tools like Microsoft Excel™ work is well understood and the software is nearly universally available. We show that the simple repetition of an equilibration process at each plate (a spreadsheet row) followed by discrete movement of the mobile phase down by a row, easily automated by a subroutine (a "Macro" in Excel), readily simulates chromatography. The process is readily understood by a novice. Not only does this permit simulation of isocratic and simple single step gradient elution, linear or multistep gradients are also easily simulated. The versatility of a transparent and easily understandable computational platform further enables the simulation of complex but commonly encountered chromatographic scenarios such as the effects of nonlinear isotherms, active sites, column overloading, on-column analyte degradation, etc. These are not as easily simulated by available software. Views of the separation as it develops on the column and as it is seen by an end-column detector are both available in real time. Excel 2010™ also permits a 16-level (4-bit) color gradation of numerical values in a column/row; this permits visualization of a band migrating down the column, much as Tswett may have originally observed, but in a numerical domain. All parameters of relevance (partition constants, elution conditions, etc.) are readily changed so their effects can be examined. Illustrative Excel spreadsheets are given in the Supporting Information; these are easily modified by the user or the user can write his/her own routine. Copyright © 2012 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Jing-Jy; Flood, Paul E.; LePoire, David

In this report, the results generated by RESRAD-RDD version 2.01 are compared with those produced by RESRAD-RDD version 1.7 for different scenarios with different sets of input parameters. RESRAD-RDD version 1.7 is spreadsheet-driven, performing calculations with Microsoft Excel spreadsheets. RESRAD-RDD version 2.01 revamped version 1.7 by using command-driven programs designed with Visual Basic.NET to direct calculations with data saved in Microsoft Access database, and re-facing the graphical user interface (GUI) to provide more flexibility and choices in guideline derivation. Because version 1.7 and version 2.01 perform the same calculations, the comparison of their results serves as verification of both versions.more » The verification covered calculation results for 11 radionuclides included in both versions: Am-241, Cf-252, Cm-244, Co-60, Cs-137, Ir-192, Po-210, Pu-238, Pu-239, Ra-226, and Sr-90. At first, all nuclidespecific data used in both versions were compared to ensure that they are identical. Then generic operational guidelines and measurement-based radiation doses or stay times associated with a specific operational guideline group were calculated with both versions using different sets of input parameters, and the results obtained with the same set of input parameters were compared. A total of 12 sets of input parameters were used for the verification, and the comparison was performed for each operational guideline group, from A to G, sequentially. The verification shows that RESRAD-RDD version 1.7 and RESRAD-RDD version 2.01 generate almost identical results; the slight differences could be attributed to differences in numerical precision with Microsoft Excel and Visual Basic.NET. RESRAD-RDD version 2.01 allows the selection of different units for use in reporting calculation results. The results of SI units were obtained and compared with the base results (in traditional units) used for comparison with version 1.7. The comparison shows that RESRAD-RDD version 2.01 correctly reports calculation results in the unit specified in the GUI.« less

[Development of an Excel spreadsheet for meta-analysis of indirect and mixed treatment comparisons].

PubMed

Tobías, Aurelio; Catalá-López, Ferrán; Roqué, Marta

2014-01-01

Meta-analyses in clinical research usually aimed to evaluate treatment efficacy and safety in direct comparison with a unique comparator. Indirect comparisons, using the Bucher's method, can summarize primary data when information from direct comparisons is limited or nonexistent. Mixed comparisons allow combining estimates from direct and indirect comparisons, increasing statistical power. There is a need for simple applications for meta-analysis of indirect and mixed comparisons. These can easily be conducted using a Microsoft Office Excel spreadsheet. We developed a spreadsheet for indirect and mixed effects comparisons of friendly use for clinical researchers interested in systematic reviews, but non-familiarized with the use of more advanced statistical packages. The use of the proposed Excel spreadsheet for indirect and mixed comparisons can be of great use in clinical epidemiology to extend the knowledge provided by traditional meta-analysis when evidence from direct comparisons is limited or nonexistent.

Health Occupations Cluster.

ERIC Educational Resources Information Center

Walraven, Catherine; And Others

These instructional materials consist of a series of curriculum worksheets that cover tasks to be mastered by students in health occupations cluster programs. Covered in the curriculum worksheets are diagnostic procedures; observing/recording/reporting/planning; safety; nutrition/elimination; hygiene/personal care/comfort;…

Indoor Air Quality & Preventive Maintenance Value Proposition Worksheet

EPA Pesticide Factsheets

Part of our outreach and education to our webinar registrants is providing them a copy of the Value Proposition Worksheet which accompanies the webinar topic. For this particular webinar the topic is focused on IAQ and Preventive Maintenance.

Feedback GAP: pragmatic, cluster-randomized trial of goal setting and action plans to increase the effectiveness of audit and feedback interventions in primary care

PubMed Central

2013-01-01

Background Audit and feedback to physicians is a commonly used quality improvement strategy, but its optimal design is unknown. This trial tested the effects of a theory-informed worksheet to facilitate goal setting and action planning, appended to feedback reports on chronic disease management, compared to feedback reports provided without these worksheets. Methods A two-arm pragmatic cluster randomized trial was conducted, with allocation at the level of primary care clinics. Participants were family physicians who contributed data from their electronic medical records. The ‘usual feedback’ arm received feedback every six months for two years regarding the proportion of their patients meeting quality targets for diabetes and/or ischemic heart disease. The intervention arm received these same reports plus a worksheet designed to facilitate goal setting and action plan development in response to the feedback reports. Blood pressure (BP) and low-density lipoprotein cholesterol (LDL) values were compared after two years as the primary outcomes. Process outcomes measured the proportion of guideline-recommended actions (e.g., testing and prescribing) conducted within the appropriate timeframe. Intention-to-treat analysis was performed. Results Outcomes were similar across groups at baseline. Final analysis included 20 physicians from seven clinics and 1,832 patients in the intervention arm (15% loss to follow up) and 29 physicians from seven clinics and 2,223 patients in the usual feedback arm (10% loss to follow up). Ten of 20 physicians completed the worksheet at least once during the study. Mean BP was 128/72 in the feedback plus worksheet arm and 128/73 in the feedback alone arm, while LDL was 2.1 and 2.0, respectively. Thus, no significant differences were observed across groups in the primary outcomes, but mean haemoglobin A1c was lower in the feedback plus worksheet arm (7.2% versus 7.4%, p<0.001). Improvements in both arms were noted over time for one-half of the process outcomes. Discussion Appending a theory-informed goal setting and action planning worksheet to an externally produced audit and feedback intervention did not lead to improvements in patient outcomes. The results may be explained in part by passive dissemination of the worksheet leading to inadequate engagement with the intervention. Trial registration ClinicalTrials.gov NCT00996645 PMID:24341511

Feedback GAP: pragmatic, cluster-randomized trial of goal setting and action plans to increase the effectiveness of audit and feedback interventions in primary care.

PubMed

Ivers, Noah M; Tu, Karen; Young, Jacqueline; Francis, Jill J; Barnsley, Jan; Shah, Baiju R; Upshur, Ross E; Moineddin, Rahim; Grimshaw, Jeremy M; Zwarenstein, Merrick

2013-12-17

Audit and feedback to physicians is a commonly used quality improvement strategy, but its optimal design is unknown. This trial tested the effects of a theory-informed worksheet to facilitate goal setting and action planning, appended to feedback reports on chronic disease management, compared to feedback reports provided without these worksheets. A two-arm pragmatic cluster randomized trial was conducted, with allocation at the level of primary care clinics. Participants were family physicians who contributed data from their electronic medical records. The 'usual feedback' arm received feedback every six months for two years regarding the proportion of their patients meeting quality targets for diabetes and/or ischemic heart disease. The intervention arm received these same reports plus a worksheet designed to facilitate goal setting and action plan development in response to the feedback reports. Blood pressure (BP) and low-density lipoprotein cholesterol (LDL) values were compared after two years as the primary outcomes. Process outcomes measured the proportion of guideline-recommended actions (e.g., testing and prescribing) conducted within the appropriate timeframe. Intention-to-treat analysis was performed. Outcomes were similar across groups at baseline. Final analysis included 20 physicians from seven clinics and 1,832 patients in the intervention arm (15% loss to follow up) and 29 physicians from seven clinics and 2,223 patients in the usual feedback arm (10% loss to follow up). Ten of 20 physicians completed the worksheet at least once during the study. Mean BP was 128/72 in the feedback plus worksheet arm and 128/73 in the feedback alone arm, while LDL was 2.1 and 2.0, respectively. Thus, no significant differences were observed across groups in the primary outcomes, but mean haemoglobin A1c was lower in the feedback plus worksheet arm (7.2% versus 7.4%, p<0.001). Improvements in both arms were noted over time for one-half of the process outcomes. Appending a theory-informed goal setting and action planning worksheet to an externally produced audit and feedback intervention did not lead to improvements in patient outcomes. The results may be explained in part by passive dissemination of the worksheet leading to inadequate engagement with the intervention. ClinicalTrials.gov NCT00996645.

A Methodology for Conducting Space Utilization Studies within Department of Defense Medical Facilities

DTIC Science & Technology

1992-07-01

database programs, such as dBase or Microsoft Excell, to yield statistical reports that can profile the health care facility . Ladeen (1989) feels that the...service specific space status report would be beneficial to the specific service(s) under study, it would not provide sufficient data for facility -wide...change in the Master Space Plan. The revised methodology also provides a mechanism and forum for spuce management education within the facility . The

Improving Intercontinental Ballistic Missile Maintenance Scheduling Through the Use of Location Analysis Methodologies

DTIC Science & Technology

2006-03-01

factors that “maximize the benefit of location to the firm” ( Heizer & Render , 2004:302-307). In the book, Facility Location: Applications and Theory...Fylstra, D., Lasdon, L., Watson, J. and Waren, A. “Design and Use of the Microsoft Excel Solver,” Interfaces, 28(5):29-55, 1998. Heizer , Jay...and Render , Barry. Principles of Operations Management (5th ed.). New Jersey: Pearson Education Inc., 2004. Hofstra University. (n.d.). Von

Application Development for Optimizing Patient Placement on Aeromedical Evacuation Flights: Proof-of-Concept

DTIC Science & Technology

2018-01-12

outcomes. This study included three phases: knowledge elicitation, establishment of rule-based, logic requirements, and the development of the POC iOS ...establish the logic needed for a mobile app prior to programming for iOS platforms. The study team selected Microsoft Excel because it enabled the...distribution of these plans would streamline the plan development process. Thus, as a proof-of-concept, the study team conducted a multi-phased effort

Optimizing Distributed Sensor Placement for Border Patrol Interdiction Using Microsoft Excel

DTIC Science & Technology

2007-04-01

weather conditions and they can be evaded by using techniques which minimize heat signatures use of lasers and other technologies day or night (26:8...technologies which can be used for border security. Maier [2004] developed a seismic intrusion sensor technology which uses fiber optic cables, lasers , and...needed to create the is used as the base map for the network. program originally developed by Keyhole by Google Inc. It provides satellite images of

TK Modeler version 1.0, a Microsoft® Excel®-based modeling software for the prediction of diurnal blood/plasma concentration for toxicokinetic use.

PubMed

McCoy, Alene T; Bartels, Michael J; Rick, David L; Saghir, Shakil A

2012-07-01

TK Modeler 1.0 is a Microsoft® Excel®-based pharmacokinetic (PK) modeling program created to aid in the design of toxicokinetic (TK) studies. TK Modeler 1.0 predicts the diurnal blood/plasma concentrations of a test material after single, multiple bolus or dietary dosing using known PK information. Fluctuations in blood/plasma concentrations based on test material kinetics are calculated using one- or two-compartment PK model equations and the principle of superposition. This information can be utilized for the determination of appropriate dosing regimens based on reaching a specific desired C(max), maintaining steady-state blood/plasma concentrations, or other exposure target. This program can also aid in the selection of sampling times for accurate calculation of AUC(24h) (diurnal area under the blood concentration time curve) using sparse-sampling methodologies (one, two or three samples). This paper describes the construction, use and validation of TK Modeler. TK Modeler accurately predicted blood/plasma concentrations of test materials and provided optimal sampling times for the calculation of AUC(24h) with improved accuracy using sparse-sampling methods. TK Modeler is therefore a validated, unique and simple modeling program that can aid in the design of toxicokinetic studies. Copyright © 2012 Elsevier Inc. All rights reserved.

Arsenic removal from contaminated groundwater by membrane-integrated hybrid plant: optimization and control using Visual Basic platform.

PubMed

Chakrabortty, S; Sen, M; Pal, P

2014-03-01

A simulation software (ARRPA) has been developed in Microsoft Visual Basic platform for optimization and control of a novel membrane-integrated arsenic separation plant in the backdrop of absence of such software. The user-friendly, menu-driven software is based on a dynamic linearized mathematical model, developed for the hybrid treatment scheme. The model captures the chemical kinetics in the pre-treating chemical reactor and the separation and transport phenomena involved in nanofiltration. The software has been validated through extensive experimental investigations. The agreement between the outputs from computer simulation program and the experimental findings are excellent and consistent under varying operating conditions reflecting high degree of accuracy and reliability of the software. High values of the overall correlation coefficient (R (2) = 0.989) and Willmott d-index (0.989) are indicators of the capability of the software in analyzing performance of the plant. The software permits pre-analysis, manipulation of input data, helps in optimization and exhibits performance of an integrated plant visually on a graphical platform. Performance analysis of the whole system as well as the individual units is possible using the tool. The software first of its kind in its domain and in the well-known Microsoft Excel environment is likely to be very useful in successful design, optimization and operation of an advanced hybrid treatment plant for removal of arsenic from contaminated groundwater.

Simulations of the cardiac action potential based on the Hodgkin-Huxley kinetics with the use of Microsoft Excel spreadsheets.

PubMed

Wu, Sheng-Nan

2004-03-31

The purpose of this study was to develop a method to simulate the cardiac action potential using a Microsoft Excel spreadsheet. The mathematical model contained voltage-gated ionic currents that were modeled using either Beeler-Reuter (B-R) or Luo-Rudy (L-R) phase 1 kinetics. The simulation protocol involves the use of in-cell formulas directly typed into a spreadsheet. The capability of spreadsheet iteration was used in these simulations. It does not require any prior knowledge of computer programming, although the use of the macro language can speed up the calculation. The normal configuration of the cardiac ventricular action potential can be well simulated in the B-R model that is defined by four individual ionic currents, each representing the diffusion of ions through channels in the membrane. The contribution of Na+ inward current to the rate of depolarization is reproduced in this model. After removal of Na+ current from the model, a constant current stimulus elicits an oscillatory change in membrane potential. In the L-R phase 1 model where six types of ionic currents were defined, the effect of extracellular K+ concentration on changes both in the time course of repolarization and in the time-independent K+ current can be demonstrated, when the solutions are implemented in Excel. Using the simulation protocols described here, the users can readily study and graphically display the underlying properties of ionic currents to see how changes in these properties determine the behavior of the heart cell. The method employed in these simulation protocols may also be extended or modified to other biological simulation programs.

Development and Validation of a Portable and Inexpensive Tool to Measure the Drop Vertical Jump Using the Microsoft Kinect V2.

PubMed

Gray, Aaron D; Willis, Brad W; Skubic, Marjorie; Huo, Zhiyu; Razu, Swithin; Sherman, Seth L; Guess, Trent M; Jahandar, Amirhossein; Gulbrandsen, Trevor R; Miller, Scott; Siesener, Nathan J

Noncontact anterior cruciate ligament (ACL) injury in adolescent female athletes is an increasing problem. The knee-ankle separation ratio (KASR), calculated at initial contact (IC) and peak flexion (PF) during the drop vertical jump (DVJ), is a measure of dynamic knee valgus. The Microsoft Kinect V2 has shown promise as a reliable and valid marker-less motion capture device. The Kinect V2 will demonstrate good to excellent correlation between KASR results at IC and PF during the DVJ, as compared with a "gold standard" Vicon motion analysis system. Descriptive laboratory study. Level 2. Thirty-eight healthy volunteer subjects (20 male, 18 female) performed 5 DVJ trials, simultaneously measured by a Vicon MX-T40S system, 2 AMTI force platforms, and a Kinect V2 with customized software. A total of 190 jumps were completed. The KASR was calculated at IC and PF during the DVJ. The intraclass correlation coefficient (ICC) assessed the degree of KASR agreement between the Kinect and Vicon systems. The ICCs of the Kinect V2 and Vicon KASR at IC and PF were 0.84 and 0.95, respectively, showing excellent agreement between the 2 measures. The Kinect V2 successfully identified the KASR at PF and IC frames in 182 of 190 trials, demonstrating 95.8% reliability. The Kinect V2 demonstrated excellent ICC of the KASR at IC and PF during the DVJ when compared with the Vicon system. A customized Kinect V2 software program demonstrated good reliability in identifying the KASR at IC and PF during the DVJ. Reliable, valid, inexpensive, and efficient screening tools may improve the accessibility of motion analysis assessment of adolescent female athletes.

Independent Orbiter Assessment (IOA): CIL issues resolution report, volume 2

NASA Technical Reports Server (NTRS)

1988-01-01

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes And Effects Analysis (FMEA) and Critical Items List (CIL) are presented. This report contains IOA assessment worksheets showing resolution of outstanding IOA CIL issues that were summarized in the IOA FMEA/CIL Assessment Interim Report, dated 9 March 1988. Each assessment worksheet has been updated with CIL issue resolution and rationale. Volume 2 contains the worksheets for the following subsystems: Nose Wheel Steering Subsystem; Remote Manipulator Subsystem; Atmospheric Revitalization Subsystem; Extravehicular Mobility Unit Subsystem; Power Reactant Supply and Distribution Subsystem; Main Propulsion Subsystem; and Orbital Maneuvering Subsystem.

Evaluation of Teaching Clinical Pharmacology of Antiarrhythmic Drugs to First-Year MBBS Students Through Worksheet-Based Small-Group Discussion.

PubMed

Hasamnis, Ameya A; Arya, Aditya

2017-01-01

Cardiac arrhythmias are a major cause of morbidity and mortality across the world. Learning the science behind the use of antiarrhythmic drugs is essential for all medical graduates. However, many antiarrhythmic drugs are available, and most of them have complex pharmacodynamic and pharmacokinetic profiles. We tried to improvise our teaching by conducting interactive, worksheet-based, small-group discussion on antiarrhythmic drugs with preclinical students of School of Medicine, Taylor's University, Malaysia. This survey was conducted to analyze the outcomes of worksheet-based, small-group discussion.

Android worksheet application based on discovery learning on students' achievement for vocational high school: Mechanical behavior of materials topics

NASA Astrophysics Data System (ADS)

Nanto, Dwi; Aini, Anisa Nurul; Mulhayatiah, Diah

2017-05-01

This research reports a study of student worksheet based on discovery learning on Mechanical Behavior of Materials topics under Android application (Android worksheet application) for vocational high school. The samples are Architecture class X students of SMKN 4 (a public vocational high school) in Tangerang Selatan City, province of Banten, Indonesia. We made 3 groups based on Intellectual Quotient (IQ). They are average IQ group, middle IQ group and high IQ group. The method of research is used as a quasi-experimental design with nonequivalent control group design. The technique of sampling is purposive sampling. Instruments used in this research are test instruments and non-test instruments. The test instruments are IQ test and test of student's achievement. For the test of student's achievement (pretest and posttest) we provide 25 multiple choice problems. The non-test instruments are questionnaire responses by the students and the teacher. Without IQ categorized, the result showed that there is an effect of Android worksheet application on student's achievement based on cognitive aspects of Revised Bloom's Taxonomy. However, from the IQ groups point of view, only the middle IQ group and the high IQ group showed a significant effect from the Android worksheet application on student's achievement meanwhile for the average IQ group there was no effect.

The effectiveness of CCDSR learning model to improve skills of creating lesson plan and worksheet science process skill (SPS) for pre-service physics teacher

NASA Astrophysics Data System (ADS)

Limatahu, I.; Sutoyo, S.; Wasis; Prahani, B. K.

2018-03-01

In the previous research, CCDSR (Condition, Construction, Development, Simulation, and Reflection) learning model has been developed to improve science process skills for pre-service physics teacher. This research is aimed to analyze the effectiveness of CCDSR learning model towards the improvement skills of creating lesson plan and worksheet of Science Process Skill (SPS) for pre-service physics teacher in academic year 2016/2017. This research used one group pre-test and post-test design on 12 pre-service physics teacher at Physics Education, University of Khairun. Data collection was conducted through test and observation. Creating lesson plan and worksheet SPS skills of pre-service physics teacher measurement were conducted through Science Process Skill Evaluation Sheet (SPSES). The data analysis technique was done by Wilcoxon t-test and n-gain. The CCDSR learning model consists of 5 phases, including (1) Condition, (2) Construction, (3) Development, (4) Simulation, and (5) Reflection. The results showed that there was a significant increase in creating lesson plan and worksheet SPS skills of pre-service physics teacher at α = 5% and n-gain average of moderate category. Thus, the CCDSR learning model is effective for improving skills of creating lesson plan and worksheet SPS for pre-service physics teacher.

Development of Lesson Plans and Student Worksheets Based Socio-Scientific Issues on Pollution Environmental Topic

NASA Astrophysics Data System (ADS)

Rahayu, S.; Meyliana, M.; Arlingga, A.; Reny, R.; Siahaan, P.; Hernani, H.

2017-09-01

The aim of this study is to develop lesson plans and student worksheets based socio-scientific issues on pollution environmental topic for seventh-grade junior high school students. Environmental pollution topic split into several subtopics namely air pollution, water pollution and soil pollution. The composing of lesson plans were developed based on socio-scientific issues with five stages, namely (1) Motivate; (2) Challenge; (3) Collect scientific evidence; (4) Analyse the evidence; (5) Build knowledge and make connections; and (6) Use evidence. While student worksheets contain articles on socio-scientific issues, practice, and there are a few questions to determine students’ reasoning. The method that is used in this research is research and development (R & D method). Development model used in this study is a model of Plomp that consists of four stages, namely: (1) Initial Research; (2) Design; (3) Realization or Construction; (4) Testing, evaluation and revision; (5) Implementation, while the research was limited to the fourth stage. Lesson plans and student worksheets based on socio-scientific issues was validated through an expert validation. The result showed that lesson plans and student worksheets based socio-scientific issues on pollution theme have a very decent and be able to apply in science classroom.

Analysis of expert validation on developing integrated science worksheet to improve problem solving skills of natural science prospective teachers

NASA Astrophysics Data System (ADS)

Widodo, W.; Sudibyo, E.; Sari, D. A. P.

2018-04-01

This study aims to develop student worksheets for higher education that apply integrated science learning in discussing issues about motion in humans. These worksheets will guide students to solve the problem about human movement. They must integrate their knowledge about biology, physics, and chemistry to solve the problem. The worksheet was validated by three experts in Natural Science Integrated Science, especially in Human Movement topic. The aspects of the validation were feasibility of the content, the construction, and the language. This research used the Likert scale to measure the validity of each aspect, which is 4.00 for very good validity criteria, 3.00 for good validity criteria, 2.00 for more or less validity criteria, and 1.00 for not good validity criteria. Data showed that the validity for each aspect were in the range of good validity and very good validity criteria (3.33 to 3.67 for the content aspect, 2.33 to 4.00 for the construction aspect, and 3.33 to 4.00 for language aspect). However, there was a part of construction aspect that needed to improve. Overall, this students’ worksheet can be applied in classroom after some revisions based on suggestions from the validators.

Recording an Excel(®) Macro to Specify Date Ranges for Clinical Data.

PubMed

Deochand, Neil; Costello, Mack S; Fuqua, R Wayne

2016-09-01

The individuals served by behavior analysts are often funded by Medicaid, insurance companies, or private pay. The first two options usually require progress notes detailing graphically and quantitatively the behavioral outcomes. These progress notes usually come in the form of a written account of milestones achieved or barriers faced, graphical displays of behavioral data, and summary tables. The graphical displays are monthly, quarterly, and annual reports for the individuals that they serve. Microsoft Excel® is one of the most accessible tools by which to accomplish this task; however, presenting the required date ranges can be a time-consuming task. A task analysis is outlined to automate this process and reduce the time taken to accomplish indirect service hours to the clients served.

Assessment of polytechnic students' understanding of basic algebra

NASA Astrophysics Data System (ADS)

Mokmin, Nur Azlina Mohamed; Masood, Mona

2015-12-01

It is important for engineering students to excel in algebra. Previous studies show that the algebraic fraction is a subtopic of algebra that was found to be the most challenging for engineering students. This study is done with 191 first semester engineering students who have enrolled in engineering programs in Malaysian polytechnic. The respondents are divided into Group 1 (Distinction) and Group 2 (Credit) based on their Mathematics SPM result. A computer application is developed for this study to assess student information and understanding of the algebraic fraction topic. The result is analyzed using SPSS and Microsoft Excel. The test results show that there are significant differences between Group 1 and Group 2 and that most of the students scored below the minimum requirement.

Escape Excel: A tool for preventing gene symbol and accession conversion errors.

PubMed

Welsh, Eric A; Stewart, Paul A; Kuenzi, Brent M; Eschrich, James A

2017-01-01

Microsoft Excel automatically converts certain gene symbols, database accessions, and other alphanumeric text into dates, scientific notation, and other numerical representations. These conversions lead to subsequent, irreversible, corruption of the imported text. A recent survey of popular genomic literature estimates that one-fifth of all papers with supplementary gene lists suffer from this issue. Here, we present an open-source tool, Escape Excel, which prevents these erroneous conversions by generating an escaped text file that can be safely imported into Excel. Escape Excel is implemented in a variety of formats (http://www.github.com/pstew/escape_excel), including a command line based Perl script, a Windows-only Excel Add-In, an OS X drag-and-drop application, a simple web-server, and as a Galaxy web environment interface. Test server implementations are accessible as a Galaxy interface (http://apostl.moffitt.org) and simple non-Galaxy web server (http://apostl.moffitt.org:8000/). Escape Excel detects and escapes a wide variety of problematic text strings so that they are not erroneously converted into other representations upon importation into Excel. Examples of problematic strings include date-like strings, time-like strings, leading zeroes in front of numbers, and long numeric and alphanumeric identifiers that should not be automatically converted into scientific notation. It is hoped that greater awareness of these potential data corruption issues, together with diligent escaping of text files prior to importation into Excel, will help to reduce the amount of Excel-corrupted data in scientific analyses and publications.

Developing Students' Environmental Knowledge through Interactive Worksheets.

ERIC Educational Resources Information Center

Ballantyne, Roy; Witney, Eve; Tulip, David

1998-01-01

Environmental education is often characterized by a concern with developing attitudes and behavior rather than developing environmental knowledge and concepts. Students may thus unknowingly hold and later teach environmental misconceptions. Discusses the use of interactive worksheets to provide a time-effective means of developing students'…

Energy Storage Criteria Handbook.

DTIC Science & Technology

1982-10-01

Phase Change Material Heating System .......................... 311 14.3.1 Analysis of Storage Purpose ........................... 312 14.3.2 Choosing...329 Worksheet I: Cost Analysis of PCM System ...................... 330 14.4 Water Tank Cold Storage...Selecting Components ........................333 14.5.6 Economic Analysis .......................................334 Worksheet A: Cooling Load and Tank

S. A. Museum: Education and Information

ERIC Educational Resources Information Center

Finlayson, D.; Hilton, F.

1976-01-01

Presented is a listing of worksheets and lecture programs available at the South Australian Museum in the area of animal science. Included are copies of the worksheets providing questions for students on African mammals, mammals of tropical Asia, American and European mammals, and Eurasian mammals. (SL)

Relative Motion of the WDS 05110+3203 STF 648 System, With a Protocol for Calculating Relative Motion

NASA Astrophysics Data System (ADS)

Wiley, E. O.

2010-07-01

Relative motion studies of visual double stars can be investigated using least squares regression techniques and readily accessible programs such as Microsoft Excel and a calculator. Optical pairs differ from physical pairs under most geometries in both their simple scatter plots and their regression models. A step-by-step protocol for estimating the rectilinear elements of an optical pair is presented. The characteristics of physical pairs using these techniques are discussed.

E-Area Low-Level Waste Facility Vadose Zone Model: Confirmation of Water Mass Balance for Subsidence Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dyer, J. A.

In preparation for the next revision of the E-Area Low-Level Waste Facility (LLWF) Performance Assessment (PA), a mass balance model was developed in Microsoft Excel to confirm correct implementation of intact- and subsided-area infiltration profiles for the proposed closure cap in the PORFLOW vadose-zone model. The infiltration profiles are based on the results of Hydrologic Evaluation of Landfill Performance (HELP) model simulations for both intact and subsided cases.

Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program.

PubMed

Afouxenidis, D; Polymeris, G S; Tsirliganis, N C; Kitis, G

2012-05-01

This paper exploits the possibility of using commercial software for thermoluminescence and optically stimulated luminescence curve deconvolution analysis. The widely used software package Microsoft Excel, with the Solver utility has been used to perform deconvolution analysis to both experimental and reference glow curves resulted from the GLOw Curve ANalysis INtercomparison project. The simple interface of this programme combined with the powerful Solver utility, allows the analysis of complex stimulated luminescence curves into their components and the evaluation of the associated luminescence parameters.

Validation Results for LEWICE 2.0. [Supplement

NASA Technical Reports Server (NTRS)

Wright, William B.; Rutkowski, Adam

1999-01-01

Two CD-ROMs contain experimental ice shapes and code prediction used for validation of LEWICE 2.0 (see NASA/CR-1999-208690, CASI ID 19990021235). The data include ice shapes for both experiment and for LEWICE, all of the input and output files for the LEWICE cases, JPG files of all plots generated, an electronic copy of the text of the validation report, and a Microsoft Excel(R) spreadsheet containing all of the quantitative measurements taken. The LEWICE source code and executable are not contained on the discs.

Space-Plane Spreadsheet Program

NASA Technical Reports Server (NTRS)

Mackall, Dale

1993-01-01

Basic Hypersonic Data and Equations (HYPERDATA) spreadsheet computer program provides data gained from three analyses of performance of space plane. Equations used to perform analyses derived from Newton's second law of physics, derivation included. First analysis is parametric study of some basic factors affecting ability of space plane to reach orbit. Second includes calculation of thickness of spherical fuel tank. Third produces ratio between volume of fuel and total mass for each of various aircraft. HYPERDATA intended for use on Macintosh(R) series computers running Microsoft Excel 3.0.

Logistic and Multiple Regression: A Two-Pronged Approach to Accurately Estimate Cost Growth in Major DoD Weapon Systems

DTIC Science & Technology

2004-03-01

Breusch - Pagan test for constant variance of the residuals. Using Microsoft Excel® we calculate a p-value of 0.841237. This high p-value, which is above...our alpha of 0.05, indicates that our residuals indeed pass the Breusch - Pagan test for constant variance. In addition to the assumption tests , we...Wilk Test for Normality – Support (Reduced) Model (OLS) Finally, we perform a Breusch - Pagan test for constant variance of the residuals. Using

Data Analysis and Its Impact on Predicting Schedule & Cost Risk

DTIC Science & Technology

2006-03-01

variance of the error term by performing a Breusch - Pagan test for constant variance (Neter et al., 1996:239). In order to test the normality of...is constant variance. Using Microsoft Excel®, we calculate a p- 68 value of 0.225678 for the Breusch - Pagan test . We again compare this p-value to...calculate a p-value of 0.121211092 Breusch - Pagan test . We again compare this p-value to an alpha of 0.05 indicating our assumption of constant variance

Heat and Mass Transfer Processes in Scrubber of Flue Gas Heat Recovery Device

NASA Astrophysics Data System (ADS)

Veidenbergs, Ivars; Blumberga, Dagnija; Vigants, Edgars; Kozuhars, Grigorijs

2010-01-01

The paper deals with the heat and mass transfer process research in a flue gas heat recovery device, where complicated cooling, evaporation and condensation processes are taking place simultaneously. The analogy between heat and mass transfer is used during the process of analysis. In order to prepare a detailed process analysis based on heat and mass process descriptive equations, as well as the correlation for wet gas parameter calculation, software in the Microsoft Office Excel environment is being developed.

An integrated data-analysis and database system for AMS 14C

NASA Astrophysics Data System (ADS)

Kjeldsen, Henrik; Olsen, Jesper; Heinemeier, Jan

2010-04-01

AMSdata is the name of a combined database and data-analysis system for AMS 14C and stable-isotope work that has been developed at Aarhus University. The system (1) contains routines for data analysis of AMS and MS data, (2) allows a flexible and accurate description of sample extraction and pretreatment, also when samples are split into several fractions, and (3) keeps track of all measured, calculated and attributed data. The structure of the database is flexible and allows an unlimited number of measurement and pretreatment procedures. The AMS 14C data analysis routine is fairly advanced and flexible, and it can be easily optimized for different kinds of measuring processes. Technically, the system is based on a Microsoft SQL server and includes stored SQL procedures for the data analysis. Microsoft Office Access is used for the (graphical) user interface, and in addition Excel, Word and Origin are exploited for input and output of data, e.g. for plotting data during data analysis.

Performance assessment in algebra learning process

NASA Astrophysics Data System (ADS)

Lestariani, Ida; Sujadi, Imam; Pramudya, Ikrar

2017-12-01

The purpose of research to describe the implementation of performance assessment on algebra learning process. The subject in this research is math educator of SMAN 1 Ngawi class X. This research includes descriptive qualitative research type. Techniques of data collecting are done by observation method, interview, and documentation. Data analysis technique is done by data reduction, data presentation, and conclusion. The results showed any indication that the steps taken by the educator in applying the performance assessment are 1) preparing individual worksheets and group worksheets, 2) preparing rubric assessments for independent worksheets and groups and 3) making performance assessments rubric to learners’ performance results with individual or groups task.

78 FR 3390 - Agency Information Collection Activities: Proposed Collection; Comment Request-FNS-380, Worksheet...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-16

... for the Supplemental Nutrition Assistance Program Quality Control Reviews AGENCY: Food and Nutrition... Nutrition Assistance Program's Quality Control Reviews. DATES: Written comments must be received on or...: Worksheet for the Supplemental Nutrition Assistance Program's (SNAP) Quality Control Reviews. Form Number...

A Worksheet for Ethics Instruction and Exercises in Reason.

ERIC Educational Resources Information Center

Bivins, Thomas H.

1993-01-01

Argues that teaching applied mass media ethics requires two vital components: a grounding in the relevant ethical theories, and a structured approach to analyzing the issues in case-study format. Presents a worksheet model that provides such an approach over a wide range of issues. (SR)

Dinosaurs.

ERIC Educational Resources Information Center

Miller, Vicki; Happel, Sue

Facts, activities, and student worksheets about dinosaurs are presented. General information about dinosaurs (when they lived and what they were like) and fossils (how they are created and what information they can provide) is followed by a worksheet and answer sheet. A timeline of the dinosaur age and a classification chart which divides…

HEALTH AND NUTRITION LESSON PLANS AND STUDENT WORKSHEETS, ADULT BASIC EDUCATION.

ERIC Educational Resources Information Center

New York State Education Dept., Albany.

THIS MANUAL PROVIDES ADULT BASIC EDUCATION TEACHERS WITH LESSON PLANS IN HEALTH AND NUTRITION. EACH LESSON CONTAINS BACKGROUND MATERIAL OFFERING SPECIFIC INFORMATION ON THE SUBJECT OF EACH LESSON, AIMS, LESSON DEVELOPMENT, AND TWO STUDENT WORKSHEETS. DISCUSSION QUESTIONS ARE SUGGESTED TO ENCOURAGE THE GREATEST POSSIBLE STUDENT INVOLVEMENT. THE TEN…

NDPC-SD Data Probes Worksheet

ERIC Educational Resources Information Center

National Dropout Prevention Center for Students with Disabilities, 2011

2011-01-01

This worksheet from the National Dropout Prevention Center for Students with Disabilities (NDPC-SD) is an optional tool to help schools organize multiple years of student and program data for the purpose of identifying school-completion needs that can be addressed through the implementation of research-based interventions. It is designed for use…

O'Neal Training Manual.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

This training manual provides 42 lessons developed for a workplace literacy program at O'Neal Steel. Each lesson consists of a summary sheet with activities and corresponding materials and time; handout(s); pretest; instructor materials and samples; and worksheet(s). Activities in each lesson are set induction, guided practice, applied practice,…

Asia Wise Workbook Number One.

ERIC Educational Resources Information Center

Tasmanian Education Dept., Hobart (Australia).

This workbook is a compilation of work sheets from the teacher's sections of the 1989 issues of "Asia Wise," an Auatralian magazine devoted to the study of Asia. Profiles and worksheets are provided for the countries of China, Indo-China, Indonesia, Japan, Philippines, and Thailand. Worksheets feature the following themes: Asian…

Formulation of consumables management models: Consumables flight planning worksheet update. [space shuttles

NASA Technical Reports Server (NTRS)

Newman, C. M.

1977-01-01

The updated consumables flight planning worksheet (CFPWS) is documented. The update includes: (1) additional consumables: ECLSS ammonia, APU propellant, HYD water; (2) additional on orbit activity for development flight instrumentation (DFI); (3) updated use factors for all consumables; and (4) sources and derivations of the use factors.

24 CFR 203.359 - Time of conveyance to the Secretary.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., 1992 or under direct endorsement processing where the credit worksheet was signed by the mortgagee's... insured under firm commitments issued on or after November 19, 1992, or under direct endorsement processing where the credit worksheet was signed by the mortgagee's underwriter on or after November 19, 1992...

Geometry in Nature: Patterns. Environmental Module for Use in a Mathematics Laboratory Setting.

ERIC Educational Resources Information Center

Trojan, Arthur; And Others

This module, designed to help students find and identify various geometric shapes and solids, contains 26 worksheets. Topics covered by these worksheets include: identification and grouping of objects with particular patterns, work with pentagons, hexagons, spirals, and symmetry. Teaching suggestions are included. (MK)

Using "Shrek" to Teach about Stigma

ERIC Educational Resources Information Center

Melchiori, Kala J.; Mallett, Robyn K.

2015-01-01

We describe an active learning exercise to teach students about social stigma. After lecturing on the topic, the instructor distributes a worksheet and shows several clips from the movie "Shrek," pausing after each clip to lead a discussion of the concepts. We provide information about the movie scenes, the student worksheet, and…

Valid analytical performance specifications for combined analytical bias and imprecision for the use of common reference intervals.

PubMed

Hyltoft Petersen, Per; Lund, Flemming; Fraser, Callum G; Sandberg, Sverre; Sölétormos, György

2018-01-01

Background Many clinical decisions are based on comparison of patient results with reference intervals. Therefore, an estimation of the analytical performance specifications for the quality that would be required to allow sharing common reference intervals is needed. The International Federation of Clinical Chemistry (IFCC) recommended a minimum of 120 reference individuals to establish reference intervals. This number implies a certain level of quality, which could then be used for defining analytical performance specifications as the maximum combination of analytical bias and imprecision required for sharing common reference intervals, the aim of this investigation. Methods Two methods were investigated for defining the maximum combination of analytical bias and imprecision that would give the same quality of common reference intervals as the IFCC recommendation. Method 1 is based on a formula for the combination of analytical bias and imprecision and Method 2 is based on the Microsoft Excel formula NORMINV including the fractional probability of reference individuals outside each limit and the Gaussian variables of mean and standard deviation. The combinations of normalized bias and imprecision are illustrated for both methods. The formulae are identical for Gaussian and log-Gaussian distributions. Results Method 2 gives the correct results with a constant percentage of 4.4% for all combinations of bias and imprecision. Conclusion The Microsoft Excel formula NORMINV is useful for the estimation of analytical performance specifications for both Gaussian and log-Gaussian distributions of reference intervals.

Assessment of refractive outcome of femtosecond-assisted LASIK for hyperopia correction

PubMed Central

El-Naggar, Mohamed Tarek; Hovaghimian, Dikran Gilbert

2017-01-01

Introduction Laser vision correction for hyperopia is challenging. The purpose of the study was to assess the refractive outcomes of femtosecond-assisted laser in situ keratomileusis (LASIK) for hyperopic correction using wavefront-optimized ablation profiles. Methods This retrospective case series study included 20 Egyptian patients (40 eyes) with hyperopia or hyperopic astigmatism with a mean manifest refraction spherical equivalent (MRSE) of +2.55D±1.17 (range from +1.00 to +6.00) who had uneventful femtosecond-a assisted LASIK with wavefront-optimized aspheric ablation profile using refractive surgery suite (WaveLight FS200 Femtosecond Laser and WaveLight EX500 Excimer Laser) performed in the Research Institute of Ophthalmology and International Eye Hospital, Giza, Egypt. Statistical analysis was done using Microsoft Excel (Microsoft Corporation, Seattle, WA, USA). Results The procedure significantly reduced the MRSE and cylinder post-operatively (95% were ± 0.50D and 100% ± 1.00 D), with stability of refraction and UDVA over the follow-up period (up to 12 months) after surgery. No eye lost any line of the CDVA, which reflects the excellent safety profile of the procedure; on the other hand, one eye (5%) gained one line and one eye (5%) even gained two lines. There were no significant complications during the procedure. Conclusions Femtosecond-assisted laser in situ keratomileusis for hyperopia showed predictable, effective, and safe refractive outcomes that were stable through 12 months. Longer follow-up period is required to detect any further regression PMID:28461870

Space shuttle/payload interface analysis. Volume 4: Business Risk and Value of Operations in Space (BRAVO). Part 3: Workbook

NASA Technical Reports Server (NTRS)

1974-01-01

A collection of blank worksheets for use on each BRAVO problem to be analyzed is supplied, for the purposes of recording the inputs for the BRAVO analysis, working out the definition of mission equipment, recording inputs to the satellite synthesis computer program, estimating satellite earth station costs, costing terrestrial systems, and cost effectiveness calculations. The group of analysts working BRAVO will normally use a set of worksheets on each problem, however, the workbook pages are of sufficiently good quality that the user can duplicate them, if more worksheet blanks are required than supplied. For Vol. 1, see N74-12493; for Vol. 2, see N74-14530.

Escape Excel: A tool for preventing gene symbol and accession conversion errors

PubMed Central

Stewart, Paul A.; Kuenzi, Brent M.; Eschrich, James A.

2017-01-01

Background Microsoft Excel automatically converts certain gene symbols, database accessions, and other alphanumeric text into dates, scientific notation, and other numerical representations. These conversions lead to subsequent, irreversible, corruption of the imported text. A recent survey of popular genomic literature estimates that one-fifth of all papers with supplementary gene lists suffer from this issue. Results Here, we present an open-source tool, Escape Excel, which prevents these erroneous conversions by generating an escaped text file that can be safely imported into Excel. Escape Excel is implemented in a variety of formats (http://www.github.com/pstew/escape_excel), including a command line based Perl script, a Windows-only Excel Add-In, an OS X drag-and-drop application, a simple web-server, and as a Galaxy web environment interface. Test server implementations are accessible as a Galaxy interface (http://apostl.moffitt.org) and simple non-Galaxy web server (http://apostl.moffitt.org:8000/). Conclusions Escape Excel detects and escapes a wide variety of problematic text strings so that they are not erroneously converted into other representations upon importation into Excel. Examples of problematic strings include date-like strings, time-like strings, leading zeroes in front of numbers, and long numeric and alphanumeric identifiers that should not be automatically converted into scientific notation. It is hoped that greater awareness of these potential data corruption issues, together with diligent escaping of text files prior to importation into Excel, will help to reduce the amount of Excel-corrupted data in scientific analyses and publications. PMID:28953918

I Wonder. Science Worksheets for the Primary Grades.

ERIC Educational Resources Information Center

Daniel, Charlie; Daniel, Becky

Designed to use simple materials that can be found in almost any household, this document provides elementary teachers and students with activities and worksheets that deal with basic scientific concepts. The activities are intended to help students form and test their own hypotheses. Each topic in the booklet is addressed through a simple…

75 FR 44002 - Agency Information Collection Activities: Submission for OMB Review; Comment Request, OMB No...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

...) Cause of Loss and Subrogation Report; 086-0- 17 (formerly 81-96) Manufactured (Mobile) Home/Travel Trailer Worksheet; 086-0-18 (formerly 81-96A) Manufactured (Mobile) Home/Travel Trailer Worksheet... collection, the categories of respondents, the estimated burden (i.e., the time, effort and resources used by...

75 FR 24728 - Agency Information Collection Activities: Proposed Collection; Comment Request, 1660-0005...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-05

... acquisition or construction of buildings located, or to be located, within FEMA-identified special flood... Insurance Program--Claim Forms AGENCY: Federal Emergency Management Agency, DHS. ACTION: Notice; 60-day... Property; 086-0-7 (formerly 81-41) Worksheet-- Building; 086-0-8 (formerly 81-41A) Worksheet--Building...

28 CFR Appendix C to Part 79 - Radiation Exposure Compensation Act Offset Worksheet-On Site Participants

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Radiation Exposure Compensation Act Offset Worksheet-On Site Participants C Appendix C to Part 79 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) CLAIMS UNDER THE RADIATION EXPOSURE COMPENSATION ACT Pt. 79, App. C Appendix C to Part...

28 CFR Appendix C to Part 79 - Radiation Exposure Compensation Act Offset Worksheet-On Site Participants

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Radiation Exposure Compensation Act Offset Worksheet-On Site Participants C Appendix C to Part 79 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) CLAIMS UNDER THE RADIATION EXPOSURE COMPENSATION ACT Pt. 79, App. C Appendix C to Part...

A Module for Hospital Central Processing Technicians on Decontamination, Assembly and Wrapping Concepts of GYN Hysterectomy Instruments.

ERIC Educational Resources Information Center

Wojcik, Roseann B.; Moseley, James L.

This learning module can be used as an orientation guide, inservice tool, or resource guide for hospital central processing department technicians and instructors. It contains information sheets, worksheets, worksheet answers, a posttest, and posttest answers on correct procedures for decontaminating, assembling, and wrapping the medical…

An Outline of the Solar System: Activities for the Elementary Student.

ERIC Educational Resources Information Center

Hartsfield, John, Comp.; Sellers, Millie, Comp.

This booklet provides information and five worksheets for elementary students studying the solar system. Fact sheets provide information on the sun, Mercury, Venus, Earth, Moon, Mars, asteroids, Jupiter, Saturn, Uranus, Neptune, Pluto, and comets. The worksheets are entitled: (1) Astronomical Unit; (2) Solar System Trivia; (3) Solar System Flash…

Central Appalachian basin natural gas database: distribution, composition, and origin of natural gases

USGS Publications Warehouse

Román Colón, Yomayra A.; Ruppert, Leslie F.

2015-01-01

The U.S. Geological Survey (USGS) has compiled a database consisting of three worksheets of central Appalachian basin natural gas analyses and isotopic compositions from published and unpublished sources of 1,282 gas samples from Kentucky, Maryland, New York, Ohio, Pennsylvania, Tennessee, Virginia, and West Virginia. The database includes field and reservoir names, well and State identification number, selected geologic reservoir properties, and the composition of natural gases (methane; ethane; propane; butane, iso-butane [i-butane]; normal butane [n-butane]; iso-pentane [i-pentane]; normal pentane [n-pentane]; cyclohexane, and hexanes). In the first worksheet, location and American Petroleum Institute (API) numbers from public or published sources are provided for 1,231 of the 1,282 gas samples. A second worksheet of 186 gas samples was compiled from published sources and augmented with public location information and contains carbon, hydrogen, and nitrogen isotopic measurements of natural gas. The third worksheet is a key for all abbreviations in the database. The database can be used to better constrain the stratigraphic distribution, composition, and origin of natural gas in the central Appalachian basin.

Guided Note Taking and Student Achievement in a Media Law Course

ERIC Educational Resources Information Center

Blom, Robin

2017-01-01

In a quasi-experimental setting, a group of U.S. college students in an introductory media law course had higher test scores when the instructor provided access to guided worksheets than a group of students without access to guided worksheets. It also allows educators in journalism and mass communication to cover more materials during courses…

University Students' Subject Disposition According to Text Types

ERIC Educational Resources Information Center

Batur, Zekerya

2017-01-01

The aim of this study is to reveal the subject trends of university students according to species. This is a qualitative study based on document review. The data of the study was obtained from 67 volunteering in-service Turkish teachers' worksheets. The worksheets were classified according to text types. Text types were determined based on the…

The Effect of Concept Cartoon-Embedded Worksheets on Grade 9 Students' Conceptual Understanding of Newton's Laws of Motion

ERIC Educational Resources Information Center

Atasoy, Sengül; Ergin, Serap

2017-01-01

Background: A substantial review study of concept cartoons reports that few studies have indicated their functions. For this reason, the present study illuminates the extent to which concept cartoon-embedded worksheets (through constructivist context) accomplish these functions in conceptual learning. Purpose: The purpose of the study is to…

Use of Practical Worksheet in Teacher Education at the Undergraduate and Postgraduate Levels

ERIC Educational Resources Information Center

Toh, Pee Choon; Toh, Tin Lam; Ho, Foo Him; Quek, Khiok Seng

2012-01-01

We have applied the "practical paradigm" in teaching problem solving to secondary school students. The key feature of the practical paradigm is the use of a practical worksheet to guide the students' processes in problem solving. In this paper, we report the diffusion of the practical paradigm to university level courses for prospective…

The Complete Control Your Money: A Quick and Easy Guide with Worksheets.

ERIC Educational Resources Information Center

2001

This workbook contains information on money management written for adult new readers. A brief self-test "Are You in Control?" is followed by 15 chapters that include information, worksheets, and summary sheets. The chapters are entitled: (1) "Getting Control of Your Money"; (2) "Tracking Your Spending"; (3) "Figuring Your Income and Expenses"; (4)…

Sharing British Columbia's Water Resources. A Teaching Unit for Secondary Schools.

ERIC Educational Resources Information Center

Gunn, Angus M.

Seventeen student worksheets form a secondary school unit which focuses on the challenge of shared usage of water resources. Pressure currently exists for a more balanced approach in which all legitimate interests in a water source are served. The worksheets include readings which focus on enough water for all, the water cycle (including a…

Begin Here. A Maths Pack. Material from the Merseyside and Cheshire Numeracy Lift-Off Project.

ERIC Educational Resources Information Center

Adult Literacy and Basic Skills Unit, London (England).

This skills pack is intended to assist numeracy tutors working with adults needing help with basic arithmetic, time telling, and money concept skills. The following materials are included: money worksheets (dealing with British currency); worksheets introducing subtraction and the various phrases used to express the difference between two numbers;…

Intermediate SCDC Spanish Curricula Units. Social Science, Unit 1, Kits 1-4, Supplement & Ditto Packet.

ERIC Educational Resources Information Center

Spanish Curricula Development Center, Miami Beach, FL.

Designed for use with the teacher's guide to the intermediate social science unit, the supplement and ditto packet provides visual aids and worksheets for class activities and seatwork for individual students. Visual materials are provided to help stimulate oral language and conceptual development. The worksheets are to be presented under…

The Complete Get That Job! A Quick and Easy Guide with Worksheets.

ERIC Educational Resources Information Center

2001

Written for adult new readers, this workbook contains 14 chapters of information on career development, job search and job retention skills. Chapters contain information, worksheets, examples, and summary sheets. The guide is intended to help adults use basic skills to decide what they can do well, identify their job search goals, pick the best…

Extended Worksheet Developed According to 5E Model Based on Constructivist Learning Approach

ERIC Educational Resources Information Center

Töman, Ufuk; Akdeniz, Ali Riza; Odabasi Çimer, Sabiha; Gürbüz, Fatih

2013-01-01

In order to achieve the targeted objectives desired level of education and modern learning theories for learner centered methods are recommended. In this context the use of worksheets developed and that student participation is considered to be one of the methods. This research is one of the ethyl alcohol fermentation biology issues and prepare…

75 FR 77936 - 60-Day Notice of Proposed Information Collection: Forms DS-2053, DS-2054; Medical Examination for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-14

... DS-2053, DS-2054; Medical Examination for Immigrant or Refugee Applicant; DS- 3024, DS-3030, Chest X... Instructions); Form DS- 3024, Chest X-Ray and Classification Worksheet (1991 Technical Instructions); Form DS-3030, Chest X-Ray and Classification Worksheet (2007 Technical Instructions); Form DS-3025, Vaccination...

People Patterns: Statistics. Environmental Module for Use in a Mathematics Laboratory Setting.

ERIC Educational Resources Information Center

Zastrocky, Michael; Trojan, Arthur

This module on statistics consists of 18 worksheets that cover such topics as sample spaces, mean, median, mode, taking samples, posting results, analyzing data, and graphing. The last four worksheets require the students to work with samples and use these to compare people's responses. A computer dating service is one result of this work.…

Designing students’ worksheet based on open-ended approach to foster students’ creative thinking skills

NASA Astrophysics Data System (ADS)

Romli, S.; Abdurrahman; Riyadi, B.

2018-01-01

This study aimed at designing an open-ended worksheet to enhance students’ creative thinking skills. The study was conducted at one private school in Bandar Lampung, Indonesia. The participants of the study were twenty students of tenth grade students and two physics teachers. This study used descriptive data. Data were collected by analyzing qualitative data, literature and focus group discussion to gain information about students’ conceptions of physics in the context of open-ended learning. The result showed that students needed innovative learning resources in form of open ended-based worksheet which could give the students an opportunity to develop various solutions related to physics problem. Therefore, students’ creative thinking skill could be improved.

Optimizing the patient transport function at Mayo Clinic.

PubMed

Kuchera, Dustin; Rohleder, Thomas R

2011-01-01

In this article, we report on the implementation of a computerized scheduling tool to optimize staffing for patient transport at the Mayo Clinic. The tool was developed and implemented in Microsoft Excel and Visual Basic for Applications and includes an easy-to-use interface. The tool allows transport management to consider the trade-offs between patient waiting time and staffing levels. While improved staffing efficiency was a desire of the project, it was important that patient service quality was also maintained. The results show that staffing could be reduced while maintaining historical patient service levels.

Whole-rock and glass major-element geochemistry of Kilauea Volcano, Hawaii, near-vent eruptive products: September 1994 through September 2001

USGS Publications Warehouse

Thornber, Carl R.; Sherrod, David R.; Siems, David F.; Heliker, Christina C.; Meeker, Gregory P.; Oscarson, Robert L.; Kauahikaua, James P.

2002-01-01

This report presents major-element geochemical data for glasses and whole-rock aliquots among 523 lava samples collected near the vent on Kilauea's east rift zone between September 1994 and October 2001. Information on sample collection, analysis techniques and analytical standard reproducibility are presented as a PDF file, which also includes a detailed explantion of the categories of sample information presented in the database spreadsheet. The sample database is downloadable as a separate Microsoft Excel file.

Shape optimization of the modular press body

NASA Astrophysics Data System (ADS)

Pabiszczak, Stanisław

2016-12-01

A paper contains an optimization algorithm of cross-sectional dimensions of a modular press body for the minimum mass criterion. Parameters of the wall thickness and the angle of their inclination relative to the base of section are assumed as the decision variables. The overall dimensions are treated as a constant. The optimal values of parameters were calculated using numerical method of the tool Solver in the program Microsoft Excel. The results of the optimization procedure helped reduce body weight by 27% while maintaining the required rigidity of the body.

1H NMR spectra dataset and solid-state NMR data of cowpea (Vigna unguiculata).

PubMed

Alves Filho, Elenilson G; Silva, Lorena M A; Teofilo, Elizita M; Larsen, Flemming H; de Brito, Edy S

2017-04-01

In this article the NMR data from chemical shifts, coupling constants, and structures of all the characterized compounds were provided, beyond a complementary PCA evaluation for the corresponding manuscript (E.G. Alves Filho, L.M.A. Silva, E.M. Teofilo, F.H. Larsen, E.S. de Brito, 2017) [3]. In addition, a complementary assessment from solid-state NMR data was provided. For further chemometric analysis, numerical matrices from the raw 1 H NMR data were made available in Microsoft Excel workbook format (.xls).

Object-oriented software for evaluating measurement uncertainty

NASA Astrophysics Data System (ADS)

Hall, B. D.

2013-05-01

An earlier publication (Hall 2006 Metrologia 43 L56-61) introduced the notion of an uncertain number that can be used in data processing to represent quantity estimates with associated uncertainty. The approach can be automated, allowing data processing algorithms to be decomposed into convenient steps, so that complicated measurement procedures can be handled. This paper illustrates the uncertain-number approach using several simple measurement scenarios and two different software tools. One is an extension library for Microsoft Excel®. The other is a special-purpose calculator using the Python programming language.

Using the electronic health record to build a culture of practice safety: evaluating the implementation of trigger tools in one general practice.

PubMed

Margham, Tom; Symes, Natalie; Hull, Sally A

2018-04-01

Identifying patients at risk of harm in general practice is challenging for busy clinicians. In UK primary care, trigger tools and case note reviews are mainly used to identify rates of harm in sample populations. This study explores how adaptions to existing trigger tool methodology can identify patient safety events and engage clinicians in ongoing reflective work around safety. Mixed-method quantitative and narrative evaluation using thematic analysis in a single East London training practice. The project team developed and tested five trigger searches, supported by Excel worksheets to guide the case review process. Project evaluation included summary statistics of completed worksheets and a qualitative review focused on ease of use, barriers to implementation, and perception of value to clinicians. Trigger searches identified 204 patients for GP review. Overall, 117 (57%) of cases were reviewed and 62 (53%) of these cases had patient safety events identified. These were usually incidents of omission, including failure to monitor or review. Key themes from interviews with practice members included the fact that GPs' work is generally reactive and GPs welcomed an approach that identified patients who were 'under the radar' of safety. All GPs expressed concern that the tool might identify too many patients at risk of harm, placing further demands on their time. Electronic trigger tools can identify patients for review in domains of clinical risk for primary care. The high yield of safety events engaged clinicians and provided validation of the need for routine safety checks. © British Journal of General Practice 2018.

CAHOST: An Excel Workbook for Facilitating the Johnson-Neyman Technique for Two-Way Interactions in Multiple Regression.

PubMed

Carden, Stephen W; Holtzman, Nicholas S; Strube, Michael J

2017-01-01

When using multiple regression, researchers frequently wish to explore how the relationship between two variables is moderated by another variable; this is termed an interaction. Historically, two approaches have been used to probe interactions: the pick-a-point approach and the Johnson-Neyman (JN) technique. The pick-a-point approach has limitations that can be avoided using the JN technique. Currently, the software available for implementing the JN technique and creating corresponding figures lacks several desirable features-most notably, ease of use and figure quality. To fill this gap in the literature, we offer a free Microsoft Excel 2013 workbook, CAHOST (a concatenation of the first two letters of the authors' last names), that allows the user to seamlessly create publication-ready figures of the results of the JN technique.

Catalog of Mount St. Helens 2004-2007 Dome Samples with Major- and Trace-Element Chemistry

USGS Publications Warehouse

Thornber, Carl R.; Pallister, John S.; Rowe, Michael C.; McConnell, Siobhan; Herriott, Trystan M.; Eckberg, Alison; Stokes, Winston C.; Cornelius, Diane Johnson; Conrey, Richard M.; Hannah, Tammy; Taggart, Joseph E.; Adams, Monique; Lamothe, Paul J.; Budahn, James R.; Knaack, Charles M.

2008-01-01

Sampling and analysis of eruptive products at Mount St. Helens is an integral part of volcano monitoring efforts conducted by the U.S. Geological Survey?s Cascades Volcano Observatory (CVO). The objective of our eruption sampling program is to enable petrological assessments of pre-eruptive magmatic conditions, critical for ascertaining mechanisms for eruption triggering and forecasting potential changes in eruption behavior. This report provides a catalog of near-vent lithic debris and new dome-lava collected during 34 intra-crater sampling forays throughout the October 2004 to October 2007 (2004?7) eruptive interval at Mount St. Helens. In addition, we present comprehensive bulk-rock geochemistry for a time-series of representative (2004?7) eruption products. This data, along with that in a companion report on Mount St. Helens 2004 to 2006 tephra by Rowe and others (2008), are presented in support of the contents of the U.S. Geological Survey Professional Paper 1750 (Sherrod and others, eds., 2008). Readers are referred to appropriate chapters in USGS Professional Paper 1750 for detailed narratives of eruptive activity during this time period and for interpretations of sample characteristics and geochemical data. The suite of rock samples related to the 2004?7 eruption of Mount St. Helens and presented in this catalog are archived at the David A. Johnson Cascades Volcano Observatory, Vancouver, Wash. The Mount St. Helens 2004?7 Dome Sample Catalogue with major- and trace-element geochemistry is tabulated in 3 worksheets of the accompanying Microsoft Excel file, of2008-1130.xls. Table 1 provides location and sampling information. Table 2 presents sample descriptions. In table 3, bulk-rock major and trace-element geochemistry is listed for 44 eruption-related samples with intra-laboratory replicate analyses of 19 dacite lava samples. A brief overview of the collection methods and lithology of dome samples is given below as an aid to deciphering the dome sample catalog. This is followed by an explanation of the categories of sample information (column headers) in Tables 1 and 2. A summary of the analytical methods used to obtain the geochemical data in this report introduces the presentation of major- and trace-element geochemistry of 2004?7 Mount St. Helens dome samples in table 3. Intra-laboratory results for the USGS AGV-2 standard are presented (tables 4 and 5), which demonstrate the compatibility of chemical data from different sources.

Using Vegetation Maps to Provide Information on Soil Distribution

NASA Astrophysics Data System (ADS)

José Ibáñez, Juan; Pérez-Gómez, Rufino; Brevik, Eric C.; Cerdà, Artemi

2016-04-01

Many different types of maps (geology, hydrology, soil, vegetation, etc.) are created to inventory natural resources. Each of these resources is mapped using a unique set of criteria, including scales and taxonomies. Past research has indicated that comparing the results of different but related maps (e.g., soil and geology maps) may aid in identifying deficiencies in those maps. Therefore, this study was undertaken in the Almería Province (Andalusia, Spain) to (i) compare the underlying map structures of soil and vegetation maps and (ii) to investigate if a vegetation map can provide useful soil information that was not shown on a soil map. To accomplish this soil and vegetation maps were imported into ArcGIS 10.1 for spatial analysis. Results of the spatial analysis were exported to Microsoft Excel worksheets for statistical analyses to evaluate fits to linear and power law regression models. Vegetative units were grouped according to the driving forces that determined their presence or absence (P/A): (i) climatophilous (climate is the only determinant of P/A) (ii); lithologic-climate (climate and parent material determine PNV P/A); and (iii) edaphophylous (soil features determine PNV P/A). The rank abundance plots for both the soil and vegetation maps conformed to Willis or Hollow Curves, meaning the underlying structures of both maps were the same. Edaphophylous map units, which represent 58.5% of the vegetation units in the study area, did not show a good correlation with the soil map. Further investigation revealed that 87% of the edaphohygrophylous units (which demand more soil water than is supplied by other soil types in the surrounding landscape) were found in ramblas, ephemeral riverbeds that are not typically classified and mapped as soils in modern systems, even though they meet the definition of soil given by the most commonly used and most modern soil taxonomic systems. Furthermore, these edaphophylous map units tend to be islands of biodiversity that are threatened by anthropogenic activity in the region. Therefore, this study revealed areas in Almería Province that need to be revisited and studied pedologically. The vegetation mapped in these areas and the soils that support it are key components of the earth's critical zone that must be studied, understood, and preserved.

CaveMan Enterprise version 1.0 Software Validation and Verification.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, David

The U.S. Department of Energy Strategic Petroleum Reserve stores crude oil in caverns solution-mined in salt domes along the Gulf Coast of Louisiana and Texas. The CaveMan software program has been used since the late 1990s as one tool to analyze pressure mea- surements monitored at each cavern. The purpose of this monitoring is to catch potential cavern integrity issues as soon as possible. The CaveMan software was written in Microsoft Visual Basic, and embedded in a Microsoft Excel workbook; this method of running the CaveMan software is no longer sustainable. As such, a new version called CaveMan Enter- prisemore » has been developed. CaveMan Enterprise version 1.0 does not have any changes to the CaveMan numerical models. CaveMan Enterprise represents, instead, a change from desktop-managed work- books to an enterprise framework, moving data management into coordinated databases and porting the numerical modeling codes into the Python programming language. This document provides a report of the code validation and verification testing.« less

Human-System Integration Scorecard Update to VB.Net

NASA Technical Reports Server (NTRS)

Sanders, Blaze D.

2009-01-01

The purpose of this project was to create Human-System Integration (HSI) scorecard software, which could be utilized to validate that human factors have been considered early in hardware/system specifications and design. The HSI scorecard is partially based upon the revised Human Rating Requirements (HRR) intended for NASA's Constellation program. This software scorecard will allow for quick appraisal of HSI factors, by using visual aids to highlight low and rapidly changing scores. This project consisted of creating a user-friendly Visual Basic program that could be easily distributed and updated, to and by fellow colleagues. Updating the Microsoft Word version of the HSI scorecard to a computer application will allow for the addition of useful features, improved easy of use, and decreased completion time for user. One significant addition is the ability to create Microsoft Excel graphs automatically from scorecard data, to allow for clear presentation of problematic areas. The purpose of this paper is to describe the rational and benefits of creating the HSI scorecard software, the problems and goals of project, and future work that could be done.

Nutrition: Eating for Better Health. Student Workbook. Health Promotion for Adult Literacy Students: An Empowering Approach.

ERIC Educational Resources Information Center

Hudson River Center for Program Development, Glenmont, NY.

This workbook was developed to help adult literacy students learn about nutrition. It contains information sheets, student worksheets, and answers to the worksheets. The information sheets are coordinated with an available audiotape. Some of the topics covered in the workbook are the following: choosing good foods without spending a lot of money;…

Instructor's Manual for Electrical Apprentice Technical Training. Series No. D (Fourth Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Twenty-seven lesson plans for a fourth-year electrical apprentice technical training program are presented in this instructor's manual. Also included are student worksheets and information sheets for each lesson, and copies of unit tests. (Answers to the worksheets and tests are provided.) The lesson plans are generally organized into four steps:…

Instructor's Manual for Electrical Apprentice Technical Training. Series No. A (First Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Thirty-six lesson plans for the first of a four-year electrical apprentice technical training program are presented in this instructor's manual. Also included are student worksheets and information sheets for each lesson, and copies of unit tests. (Answers to the worksheets and tests are provided.) The lesson plans are generally organized into…

Pension Accounting and Reporting with Other Comprehensive Income and Deferred Taxes: A Worksheet Approach

ERIC Educational Resources Information Center

Jackson, Robert E.; Sneathen, L. Dwight, Jr.; Veal, Timothy R.

2012-01-01

This instructional tool presents pension accounting using a worksheet approach where debits equal credits for both the employer and for the plan. Transactions associated with the initiation of the plan through the end of the second year of the plan are presented, including their impact on accumulated other comprehensive income and deferred taxes.…

Instructor's Manual for Electrical Apprentice Technical Training. Series No. B (Second Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Twenty-eight lesson plans for the second year of a four-year electrical apprentice technical training program are presented in this instructor's manual. Also included are student worksheets and information sheets for each lesson, and copies of unit tests. (Answers to the worksheets and tests are provided.) The lesson plans are generally organized…

First Aid: Helping Yourself, Helping Others. Student Workbook. Health Promotion for Adult Literacy Students: An Empowering Approach.

ERIC Educational Resources Information Center

Hudson River Center for Program Development, Glenmont, NY.

This workbook was developed to help adult literacy students learn about first aid in order to help themselves and others. It contains information sheets, student worksheets, and answers to the worksheets. The information sheets are coordinated with an available audiotape. Some of the topics covered in the workbook are the following: handling an…

Increasing Competition for Spares Within AFLC (Air Force Logistics Command).

DTIC Science & Technology

1984-05-13

5-50 5.13 Hypothesis H13 . . . . . . . . . . . . . . . . . . . . . . 5-51 5.13.1 Introduction...Worksheet: IM/SM File Review . . . . . . . . . . . . . . 4-8 4-4 Data Worksheet: Hypotheses H12 and H13 . . . . . . . . . . . . 4-9 4-5 Data Sheet...competition in which the market is characterized by either few sellers or many sellers. With few sellers (like the automobile and steel industries) an

The Uncomplicated Elementary Career Education System for the "Real" Classroom. Career Corners--Math for 7-8.

ERIC Educational Resources Information Center

Illinois State Office of Education, Springfield. Div. of Adult Vocational and Technical Education.

Prepared by classroom teachers for the infusion of career education into existing curriculum, this notebook contains career-related student worksheets in a number of math skills. The activities are suitable for use with a variety of ability levels and learning styles. These worksheets for grades 7 and 8 are divided into seven major mathematics…

Coding Instructions, Worksheets, and Keypunch Sheets for M.E.T.R.O.-APEX Simulation.

ERIC Educational Resources Information Center

Michigan Univ., Ann Arbor. Environmental Simulation Lab.

Compiled in this resource are coding instructions, worksheets, and keypunch sheets for use in the M.E.T.R.O.-APEX simulation, described in detail in documents ED 064 530 through ED 064 550. Air Pollution Exercise (APEX) is a computerized college and professional level "real world" simulation of a community with urban and rural problems, industrial…

CDF-XL: computing cumulative distribution functions of reaction time data in Excel.

PubMed

Houghton, George; Grange, James A

2011-12-01

In experimental psychology, central tendencies of reaction time (RT) distributions are used to compare different experimental conditions. This emphasis on the central tendency ignores additional information that may be derived from the RT distribution itself. One method for analysing RT distributions is to construct cumulative distribution frequency plots (CDFs; Ratcliff, Psychological Bulletin 86:446-461, 1979). However, this method is difficult to implement in widely available software, severely restricting its use. In this report, we present an Excel-based program, CDF-XL, for constructing and analysing CDFs, with the aim of making such techniques more readily accessible to researchers, including students (CDF-XL can be downloaded free of charge from the Psychonomic Society's online archive). CDF-XL functions as an Excel workbook and starts from the raw experimental data, organised into three columns (Subject, Condition, and RT) on an Input Data worksheet (a point-and-click utility is provided for achieving this format from a broader data set). No further preprocessing or sorting of the data is required. With one click of a button, CDF-XL will generate two forms of cumulative analysis: (1) "standard" CDFs, based on percentiles of participant RT distributions (by condition), and (2) a related analysis employing the participant means of rank-ordered RT bins. Both analyses involve partitioning the data in similar ways, but the first uses a "median"-type measure at the participant level, while the latter uses the mean. The results are presented in three formats: (i) by participants, suitable for entry into further statistical analysis; (ii) grand means by condition; and (iii) completed CDF plots in Excel charts.

Desktop Application Program to Simulate Cargo-Air-Drop Tests

NASA Technical Reports Server (NTRS)

Cuthbert, Peter

2009-01-01

The DSS Application is a computer program comprising a Windows version of the UNIX-based Decelerator System Simulation (DSS) coupled with an Excel front end. The DSS is an executable code that simulates the dynamics of airdropped cargo from first motion in an aircraft through landing. The bare DSS is difficult to use; the front end makes it easy to use. All inputs to the DSS, control of execution of the DSS, and postprocessing and plotting of outputs are handled in the front end. The front end is graphics-intensive. The Excel software provides the graphical elements without need for additional programming. Categories of input parameters are divided into separate tabbed windows. Pop-up comments describe each parameter. An error-checking software component evaluates combinations of parameters and alerts the user if an error results. Case files can be created from inputs, making it possible to build cases from previous ones. Simulation output is plotted in 16 charts displayed on a separate worksheet, enabling plotting of multiple DSS cases with flight-test data. Variables assigned to each plot can be changed. Selected input parameters can be edited from the plot sheet for quick sensitivity studies.