Electronic Attack Platform Placement Optimization

DTIC Science & Technology

2014-09-01

Processing in VBA ...............................................................33 2. Client-Server Using Two Different Excel Application...6 Figure 3. Screenshot of the VBA IDE contained within all Microsoft Office products...application using MS Excel’s Applicatin.OnTime method. .....................................33 Figure 20. WINSOCK API Functions needed to use TCP via VBA

Utilization of integrated Michaelis-Menten equations for enzyme inhibition diagnosis and determination of kinetic constants using Solver supplement of Microsoft Office Excel.

PubMed

Bezerra, Rui M F; Fraga, Irene; Dias, Albino A

2013-01-01

Enzyme kinetic parameters are usually determined from initial rates nevertheless, laboratory instruments only measure substrate or product concentration versus reaction time (progress curves). To overcome this problem we present a methodology which uses integrated models based on Michaelis-Menten equation. The most severe practical limitation of progress curve analysis occurs when the enzyme shows a loss of activity under the chosen assay conditions. To avoid this problem it is possible to work with the same experimental points utilized for initial rates determination. This methodology is illustrated by the use of integrated kinetic equations with the well-known reaction catalyzed by alkaline phosphatase enzyme. In this work nonlinear regression was performed with the Solver supplement (Microsoft Office Excel). It is easy to work with and track graphically the convergence of SSE (sum of square errors). The diagnosis of enzyme inhibition was performed according to Akaike information criterion. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Teaching physics using Microsoft Excel

NASA Astrophysics Data System (ADS)

Uddin, Zaheer; Ahsanuddin, Muhammad; Khan, Danish Ahmed

2017-09-01

Excel is both ubiquitous and easily understandable. Most people from every walk of life know how to use MS office and Excel spreadsheets. Students are also familiar with spreadsheets. Most students know how to use spreadsheets for data analysis. Besides basic use of Excel, some important aspects of spreadsheets are highlighted in this article. MS Excel can be used to visualize effects of various parameters in a physical system. It can be used as a simulating tool; simulation of wind data has been done through spreadsheets in this study. Examples of Lissajous figures and a damped harmonic oscillator are presented in this article.

Cloud Computing Based E-Learning System

ERIC Educational Resources Information Center

Al-Zoube, Mohammed; El-Seoud, Samir Abou; Wyne, Mudasser F.

2010-01-01

Cloud computing technologies although in their early stages, have managed to change the way applications are going to be developed and accessed. These technologies are aimed at running applications as services over the internet on a flexible infrastructure. Microsoft office applications, such as word processing, excel spreadsheet, access database…

A tutorial on the use of Excel 2010 and Excel for Mac 2011 for conducting delay-discounting analyses.

PubMed

Reed, Derek D; Kaplan, Brent A; Brewer, Adam T

2012-01-01

In recent years, researchers and practitioners in the behavioral sciences have profited from a growing literature on delay discounting. The purpose of this article is to provide readers with a brief tutorial on how to use Microsoft Office Excel 2010 and Excel for Mac 2011 to analyze discounting data to yield parameters for both the hyperbolic discounting model and area under the curve. This tutorial is intended to encourage the quantitative analysis of behavior in both research and applied settings by readers with relatively little formal training in nonlinear regression.

A TUTORIAL ON THE USE OF EXCEL 2010 AND EXCEL FOR MAC 2011 FOR CONDUCTING DELAY-DISCOUNTING ANALYSES

PubMed Central

Reed, Derek D; Kaplan, Brent A; Brewer, Adam T

2012-01-01

In recent years, researchers and practitioners in the behavioral sciences have profited from a growing literature on delay discounting. The purpose of this article is to provide readers with a brief tutorial on how to use Microsoft Office Excel 2010 and Excel for Mac 2011 to analyze discounting data to yield parameters for both the hyperbolic discounting model and area under the curve. This tutorial is intended to encourage the quantitative analysis of behavior in both research and applied settings by readers with relatively little formal training in nonlinear regression. PMID:22844143

Conducting Automated Test Assembly Using the Premium Solver Platform Version 7.0 with Microsoft Excel and the Large-Scale LP/QP Solver Engine Add-In

ERIC Educational Resources Information Center

Cor, Ken; Alves, Cecilia; Gierl, Mark J.

2008-01-01

This review describes and evaluates a software add-in created by Frontline Systems, Inc., that can be used with Microsoft Excel 2007 to solve large, complex test assembly problems. The combination of Microsoft Excel 2007 with the Frontline Systems Premium Solver Platform is significant because Microsoft Excel is the most commonly used spreadsheet…

Tool to Prioritize Energy Efficiency Investments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farese, P.; Gelman, R.; Hendron, R.

2012-08-01

To provide analytic support of the U.S. Department of Energy's Office of the Building Technology Program (BTP), NREL developed a Microsoft Excel-based tool to provide an open and objective comparison of the hundreds of investment opportunities available to BTP. This tool uses established methodologies to evaluate the energy savings and cost of those savings.

Gaussian-Type Orbitals versus Slater-Type Orbitals: A Comparison

ERIC Educational Resources Information Center

Magalha~es, Alexandre L.

2014-01-01

The advantages of Gaussian-type orbitals (GTO) over Slater-type orbitals (STO) in quantum chemistry calculations are clarified here by means of a holistic approach. The popular Microsoft Office Excel program was used to create an interactive application with which students are able to explore the features of GTO, including automatic calculations…

78 FR 35153 - Fisheries Off West Coast States; Modifications of the West Coast Commercial Salmon Fisheries...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-12

... seq. Dated: June 7, 2013. Kara Meckley, Acting Deputy Director, Office of Sustainable Fisheries... June 27, 2013. ADDRESSES: You may submit comments, identified by NOAA-NMFS-2012-0248, by any one of the... anonymous). Attachments to electronic comments will be accepted in Microsoft Word, Excel, or Adobe PDF file...

A Field-Tested Task Analysis for Creating Single-Subject Graphs Using Microsoft[R] Office Excel

ERIC Educational Resources Information Center

Lo, Ya-yu; Konrad, Moira

2007-01-01

Creating single-subject (SS) graphs is challenging for many researchers and practitioners because it is a complex task with many steps. Although several authors have introduced guidelines for creating SS graphs, many users continue to experience frustration. The purpose of this article is to minimize these frustrations by providing a field-tested…

What's New with MS Office Suites

ERIC Educational Resources Information Center

Goldsborough, Reid

2012-01-01

If one buys a new PC, laptop, or netbook computer today, it probably comes preloaded with Microsoft Office 2010 Starter Edition. This is a significantly limited, advertising-laden version of Microsoft's suite of productivity programs, Microsoft Office. This continues the trend of PC makers providing ever more crippled versions of Microsoft's…

USING MICROSOFT OFFICE EXCEL® 2007 TO CONDUCT GENERALIZED MATCHING ANALYSES

PubMed Central

Reed, Derek D

2009-01-01

The generalized matching equation is a robust and empirically supported means of analyzing relations between reinforcement and behavior. Unfortunately, no simple task analysis is available to behavior analysts interested in using the matching equation to evaluate data in clinical or applied settings. This technical article presents a task analysis for the use of Microsoft Excel to analyze and plot the generalized matching equation. Using a data-based case example and a step-by-step guide for completing the analysis, these instructions are intended to promote the use of quantitative analyses by researchers with little to no experience in quantitative analyses or the matching law. PMID:20514196

Microsoft Excel Software Usage for Teaching Science and Engineering Curriculum

ERIC Educational Resources Information Center

Singh, Gurmukh; Siddiqui, Khalid

2009-01-01

In this article, our main objective is to present the use of Microsoft Software Excel 2007/2003 for teaching college and university level curriculum in science and engineering. In particular, we discuss two interesting and fascinating examples of interactive applications of Microsoft Excel targeted for undergraduate students in: 1) computational…

75 FR 14401 - Amendment of Certain of the Commission's Rules of Practice and Procedure and Rules of Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-25

... were created, such as Microsoft Excel, Microsoft Word, or Microsoft PowerPoint (``native format'')? We... (condensed) or expanded (detailed) format Export search results to Excel or PDF As noted above, system is...., Microsoft Word ``.doc'' format or non-copy protected text- searchable ``.pdf'' format)? Should submissions...

Chemicalome and metabolome profiling of polymethoxylated flavonoids in Citri Reticulatae Pericarpium based on an integrated strategy combining background subtraction and modified mass defect filter in a Microsoft Excel Platform.

PubMed

Zeng, Su-Ling; Duan, Li; Chen, Bai-Zhong; Li, Ping; Liu, E-Hu

2017-07-28

Detection of metabolites in complex biological matrixes is a great challenge because of the background noise and endogenous components. Herein, we proposed an integrated strategy that combined background subtraction program and modified mass defect filter (MMDF) data mining in a Microsoft Excel platform for chemicalome and metabolome profiling of the polymethoxylated flavonoids (PMFs) in Citri Reticulatae Pericarpium (CRP). The exogenously-sourced ions were firstly filtered out by the developed Visual Basic for Applications (VBA) program incorporated in the Microsoft Office. The novel MMDF strategy was proposed for detecting both target and untarget constituents and metabolites based on narrow, well-defined mass defect ranges. The approach was validated to be powerful, and potentially useful for the metabolite identification of both single compound and homologous compound mixture. We successfully identified 30 and 31 metabolites from rat biosamples after oral administration of nobiletin and tangeretin, respectively. A total of 56 PMFs compounds were chemically characterized and 125 metabolites were captured. This work demonstrated the feasibility of the integrated approach for reliable characterization of the constituents and metabolites in herbal medicines. Copyright © 2017 Elsevier B.V. All rights reserved.

Visual Information for the Desktop, version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

2006-03-29

VZIN integrates visual analytics capabilities into popular desktop tools to aid a user in searching and understanding an information space. VZIN allows users to Drag-Drop-Visualize-Explore-Organize information within tools such as Microsoft Office, Windows Explorer, Excel, and Outlook. VZIN is tailorable to specific client or industry requirements. VZIN follows the desktop metaphors so that advanced analytical capabilities are available with minimal user training.

76 FR 12091 - Commission Information Collection Activities, Proposed Collections; Comment Request; Extension

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... Microsoft Excel version of the Form 561. The Microsoft Excel version of the Form 561 has been available... of the Excel software to make filling the form out easier and compiling the filed information more...

Overcoming Microsoft Excel's Weaknesses for Crop Model Building and Simulations

ERIC Educational Resources Information Center

Sung, Christopher Teh Boon

2011-01-01

Using spreadsheets such as Microsoft Excel for building crop models and running simulations can be beneficial. Excel is easy to use, powerful, and versatile, and it requires the least proficiency in computer programming compared to other programming platforms. Excel, however, has several weaknesses: it does not directly support loops for iterative…

Using OpenOffice as a Portable Interface to JAVA-Based Applications

NASA Astrophysics Data System (ADS)

Comeau, T.; Garrett, B.; Richon, J.; Romelfanger, F.

2004-07-01

STScI previously used Microsoft Word and Microsoft Access, a Sybase ODBC driver, and the Adobe Acrobat PDF writer, along with a substantial amount of Visual Basic, to generate a variety of documents for the internal Space Telescope Grants Administration System (STGMS). While investigating an upgrade to Microsoft Office XP, we began considering alternatives, ultimately selecting an open source product, OpenOffice.org. This reduces the total number of products required to operate the internal STGMS system, simplifies the build system, and opens the possibility of moving to a non-Windows platform. We describe the experience of moving from Microsoft Office to OpenOffice.org, and our other internal uses of OpenOffice.org in our development environment.

ExcelAutomat: a tool for systematic processing of files as applied to quantum chemical calculations

NASA Astrophysics Data System (ADS)

Laloo, Jalal Z. A.; Laloo, Nassirah; Rhyman, Lydia; Ramasami, Ponnadurai

2017-07-01

The processing of the input and output files of quantum chemical calculations often necessitates a spreadsheet as a key component of the workflow. Spreadsheet packages with a built-in programming language editor can automate the steps involved and thus provide a direct link between processing files and the spreadsheet. This helps to reduce user-interventions as well as the need to switch between different programs to carry out each step. The ExcelAutomat tool is the implementation of this method in Microsoft Excel (MS Excel) using the default Visual Basic for Application (VBA) programming language. The code in ExcelAutomat was adapted to work with the platform-independent open-source LibreOffice Calc, which also supports VBA. ExcelAutomat provides an interface through the spreadsheet to automate repetitive tasks such as merging input files, splitting, parsing and compiling data from output files, and generation of unique filenames. Selected extracted parameters can be retrieved as variables which can be included in custom codes for a tailored approach. ExcelAutomat works with Gaussian files and is adapted for use with other computational packages including the non-commercial GAMESS. ExcelAutomat is available as a downloadable MS Excel workbook or as a LibreOffice workbook.

ExcelAutomat: a tool for systematic processing of files as applied to quantum chemical calculations.

PubMed

Laloo, Jalal Z A; Laloo, Nassirah; Rhyman, Lydia; Ramasami, Ponnadurai

2017-07-01

The processing of the input and output files of quantum chemical calculations often necessitates a spreadsheet as a key component of the workflow. Spreadsheet packages with a built-in programming language editor can automate the steps involved and thus provide a direct link between processing files and the spreadsheet. This helps to reduce user-interventions as well as the need to switch between different programs to carry out each step. The ExcelAutomat tool is the implementation of this method in Microsoft Excel (MS Excel) using the default Visual Basic for Application (VBA) programming language. The code in ExcelAutomat was adapted to work with the platform-independent open-source LibreOffice Calc, which also supports VBA. ExcelAutomat provides an interface through the spreadsheet to automate repetitive tasks such as merging input files, splitting, parsing and compiling data from output files, and generation of unique filenames. Selected extracted parameters can be retrieved as variables which can be included in custom codes for a tailored approach. ExcelAutomat works with Gaussian files and is adapted for use with other computational packages including the non-commercial GAMESS. ExcelAutomat is available as a downloadable MS Excel workbook or as a LibreOffice workbook.

[Application of three compartment model and response surface model to clinical anesthesia using Microsoft Excel].

PubMed

Abe, Eiji; Abe, Mari

2011-08-01

With the spread of total intravenous anesthesia, clinical pharmacology has become more important. We report Microsoft Excel file applying three compartment model and response surface model to clinical anesthesia. On the Microsoft Excel sheet, propofol, remifentanil and fentanyl effect-site concentrations are predicted (three compartment model), and probabilities of no response to prodding, shaking, surrogates of painful stimuli and laryngoscopy are calculated using predicted effect-site drug concentration. Time-dependent changes in these calculated values are shown graphically. Recent development in anesthetic drug interaction studies are remarkable, and its application to clinical anesthesia with this Excel file is simple and helpful for clinical anesthesia.

78 FR 45542 - Request for Information: The National Institute of Environmental Health Sciences/National...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-29

... submitted electronically in Microsoft Excel or Word formats to [email protected] . FOR FURTHER... recommendations should be submitted electronically in Microsoft Excel or Word format. Respondents to this request...

Using Microsoft Excel to Generate Usage Statistics

ERIC Educational Resources Information Center

Spellman, Rosemary

2011-01-01

At the Libraries Service Center, statistics are generated on a monthly, quarterly, and yearly basis by using four Microsoft Excel workbooks. These statistics provide information about what materials are being requested and by whom. They also give details about why certain requests may not have been filled. Utilizing Excel allows for a shallower…

The Effect of Using Microsoft Excel in a High School Algebra Class

ERIC Educational Resources Information Center

Neurath, Rachel A.; Stephens, Larry J.

2006-01-01

The purpose of this study was to investigate the effect of integrating Microsoft Excel into a high school algebra class. The results indicate a slight increase in student achievement when Excel was used. A teacher-created final exam and two Criterion Referenced Tests measured success. One of the Criterion Referenced Tests indicated that the…

Creating Single-Subject Design Graphs in Microsoft Excel[TM] 2007

ERIC Educational Resources Information Center

Dixon, Mark R.; Jackson, James W.; Small, Stacey L.; Horner-King, Mollie J.; Mui Ker Lik, Nicholas; Garcia, Yors; Rosales, Rocio

2009-01-01

Over 10 years have passed since the publication of Carr and Burkholder's (1998) technical article on how to construct single-subject graphs using Microsoft Excel. Over the course of the past decade, the Excel program has undergone a series of revisions that make the Carr and Burkholder paper somewhat difficult to follow with newer versions. The…

Creating single-subject design graphs in Microsoft Excel 2007.

PubMed

Dixon, Mark R; Jackson, James W; Small, Stacey L; Horner-King, Mollie J; Lik, Nicholas Mui Ker; Garcia, Yors; Rosales, Rocio

2009-01-01

Over 10 years have passed since the publication of Carr and Burkholder's (1998) technical article on how to construct single-subject graphs using Microsoft Excel. Over the course of the past decade, the Excel program has undergone a series of revisions that make the Carr and Burkholder paper somewhat difficult to follow with newer versions. The present article provides task analyses for constructing various types of commonly used single-subject design graphs in Microsoft Excel 2007. The task analyses were evaluated using a between-subjects design that compared the graphing skills of 22 behavior-analytic graduate students using Excel 2007 and either the Carr and Burkholder or newly developed task analyses. Results indicate that the new task analyses yielded more accurate and faster graph construction than the Carr and Burkholder instructions.

An add-in implementation of the RESAMPLING syntax under Microsoft EXCEL.

PubMed

Meineke, I

2000-10-01

The RESAMPLING syntax defines a set of powerful commands, which allow the programming of probabilistic statistical models with few, easily memorized statements. This paper presents an implementation of the RESAMPLING syntax using Microsoft EXCEL with Microsoft WINDOWS(R) as a platform. Two examples are given to demonstrate typical applications of RESAMPLING in biomedicine. Details of the implementation with special emphasis on the programming environment are discussed at length. The add-in is available electronically to interested readers upon request. The use of the add-in facilitates numerical statistical analyses of data from within EXCEL in a comfortable way.

Photos of MRSA Infections

MedlinePlus

... and Team Healthcare Providers Prevention Information and Advice Posters for the Athletic Community General MRSA Information and ... site? Adobe PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel file Audio/Video file Apple ...

Scientific Data Analysis Toolkit: A Versatile Add-in to Microsoft Excel for Windows

ERIC Educational Resources Information Center

Halpern, Arthur M.; Frye, Stephen L.; Marzzacco, Charles J.

2018-01-01

Scientific Data Analysis Toolkit (SDAT) is a rigorous, versatile, and user-friendly data analysis add-in application for Microsoft Excel for Windows (PC). SDAT uses the familiar Excel environment to carry out most of the analytical tasks used in data analysis. It has been designed for student use in manipulating and analyzing data encountered in…

Heat and Mass Transfer Processes in Scrubber of Flue Gas Heat Recovery Device

NASA Astrophysics Data System (ADS)

Veidenbergs, Ivars; Blumberga, Dagnija; Vigants, Edgars; Kozuhars, Grigorijs

2010-01-01

The paper deals with the heat and mass transfer process research in a flue gas heat recovery device, where complicated cooling, evaporation and condensation processes are taking place simultaneously. The analogy between heat and mass transfer is used during the process of analysis. In order to prepare a detailed process analysis based on heat and mass process descriptive equations, as well as the correlation for wet gas parameter calculation, software in the Microsoft Office Excel environment is being developed.

An Interactive Microsoft(registered tm) Excel Program for Tracking a Single Evaporating Droplet in Crossflow

NASA Technical Reports Server (NTRS)

Liew, K. H.; Urip, E.; Yang, S. L.; Marek, C. J.

2004-01-01

Droplet interaction with a high temperature gaseous crossflow is important because of its wide application in systems involving two phase mixing such as in combustion requiring quick mixing of fuel and air with the reduction of pollutants and for jet mixing in the dilution zone of combustors. Therefore, the focus of this work is to investigate dispersion of a two-dimensional atomized and evaporating spray jet into a two-dimensional crossflow. An interactive Microsoft Excel program for tracking a single droplet in crossflow that has previously been developed will be modified to include droplet evaporation computation. In addition to the high velocity airflow, the injected droplets are also subjected to combustor temperature and pressure that affect their motion in the flow field. Six ordinary differential equations are then solved by 4th-order Runge-Kutta method using Microsoft Excel software. Microsoft Visual Basic programming and Microsoft Excel macrocode are used to produce the data and plot graphs describing the droplet's motion in the flow field. This program computes and plots the data sequentially without forcing the user to open other types of plotting programs. A user's manual on how to use the program is included.

78 FR 65431 - Notice of Funds Availability (NOFA) Inviting Applications for the Community Development Financial...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... form; (2) a Microsoft Excel Workbook; (3) a Microsoft Word Narrative template; and (4) other mandatory attachments. (Applicants must use the Microsoft Word Narrative template the CDFI Fund provides; alternative...

Impact of office productivity cloud computing on energy consumption and greenhouse gas emissions.

PubMed

Williams, Daniel R; Tang, Yinshan

2013-05-07

Cloud computing is usually regarded as being energy efficient and thus emitting less greenhouse gases (GHG) than traditional forms of computing. When the energy consumption of Microsoft's cloud computing Office 365 (O365) and traditional Office 2010 (O2010) software suites were tested and modeled, some cloud services were found to consume more energy than the traditional form. The developed model in this research took into consideration the energy consumption at the three main stages of data transmission; data center, network, and end user device. Comparable products from each suite were selected and activities were defined for each product to represent a different computing type. Microsoft provided highly confidential data for the data center stage, while the networking and user device stages were measured directly. A new measurement and software apportionment approach was defined and utilized allowing the power consumption of cloud services to be directly measured for the user device stage. Results indicated that cloud computing is more energy efficient for Excel and Outlook which consumed less energy and emitted less GHG than the standalone counterpart. The power consumption of the cloud based Outlook (8%) and Excel (17%) was lower than their traditional counterparts. However, the power consumption of the cloud version of Word was 17% higher than its traditional equivalent. A third mixed access method was also measured for Word which emitted 5% more GHG than the traditional version. It is evident that cloud computing may not provide a unified way forward to reduce energy consumption and GHG. Direct conversion from the standalone package into the cloud provision platform can now consider energy and GHG emissions at the software development and cloud service design stage using the methods described in this research.

imDEV: a graphical user interface to R multivariate analysis tools in Microsoft Excel

USDA-ARS?s Scientific Manuscript database

Interactive modules for data exploration and visualization (imDEV) is a Microsoft Excel spreadsheet embedded application providing an integrated environment for the analysis of omics data sets with a user-friendly interface. Individual modules were designed to provide toolsets to enable interactive ...

Illustrating the Central Limit Theorem through Microsoft Excel Simulations

ERIC Educational Resources Information Center

Moen, David H.; Powell, John E.

2005-01-01

Using Microsoft Excel, several interactive, computerized learning modules are developed to demonstrate the Central Limit Theorem. These modules are used in the classroom to enhance the comprehension of this theorem. The Central Limit Theorem is a very important theorem in statistics, and yet because it is not intuitively obvious, statistics…

CREATING SINGLE-SUBJECT DESIGN GRAPHS IN MICROSOFT EXCELTM 2007

PubMed Central

Dixon, Mark R; Jackson, James W; Small, Stacey L; Horner-King, Mollie J; Lik, Nicholas Mui Ker; Garcia, Yors; Rosales, Rocio

2009-01-01

Over 10 years have passed since the publication of Carr and Burkholder's (1998) technical article on how to construct single-subject graphs using Microsoft Excel. Over the course of the past decade, the Excel program has undergone a series of revisions that make the Carr and Burkholder paper somewhat difficult to follow with newer versions. The present article provides task analyses for constructing various types of commonly used single-subject design graphs in Microsoft Excel 2007. The task analyses were evaluated using a between-subjects design that compared the graphing skills of 22 behavior-analytic graduate students using Excel 2007 and either the Carr and Burkholder or newly developed task analyses. Results indicate that the new task analyses yielded more accurate and faster graph construction than the Carr and Burkholder instructions. PMID:19949515

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis.

PubMed

Neyeloff, Jeruza L; Fuchs, Sandra C; Moreira, Leila B

2012-01-20

Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software.

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis

PubMed Central

2012-01-01

Background Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. Findings We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. Conclusions It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software. PMID:22264277

Shear bond strength in zirconia veneered ceramics using two different surface treatments prior veneering.

PubMed

Gasparić, Lana Bergman; Schauperl, Zdravko; Mehulić, Ketij

2013-03-01

Aim of the study was to assess the effect of different surface treatments on the shear bond strength (SBS) of the veneering ceramics to zirconia core. In a shear test the influence of grinding and sandblasting of the zirconia surface on bonding were assessed. Statistical analysis was performed using SPSS statistical package (version 17.0, SPSS Inc., Chicago, IL, USA) and Microsoft Office Excel 2003 (Microsoft, Seattle, WA, USA). There was a significant difference between the groups considering shear bond strength (SBS) values, i.e. ground and sandblasted samples had significantly higher SBS values than only ground samples (mean difference = -190.67; df = 10, t = -6.386, p < 0.001). The results of the present study indicate that ground and sandblasted cores are superior to ground cores, allowing significantly higher surface roughness and significantly higher shear bond strength between the core and the veneering material.

FastStats: Kidney Disease

MedlinePlus

... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel file Audio/Video file Apple Quicktime file RealPlayer file Text file Zip Archive file SAS file ePub file RIS file Page last reviewed: February 18, 2013 Page last updated: March 30, 2017 Content source: ...

Scabies: Workplace Frequently Asked Questions (FAQs)

MedlinePlus

... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel file Audio/Video file Apple Quicktime file RealPlayer file Text file Zip Archive file SAS file ePub file RIS file Page last reviewed: July 19, 2013 Page last updated: July 19, 2013 Content source: ...

Limitations of Using Microsoft Excel Version 2016 (MS Excel 2016) for Statistical Analysis for Medical Research.

PubMed

Tanavalee, Chotetawan; Luksanapruksa, Panya; Singhatanadgige, Weerasak

2016-06-01

Microsoft Excel (MS Excel) is a commonly used program for data collection and statistical analysis in biomedical research. However, this program has many limitations, including fewer functions that can be used for analysis and a limited number of total cells compared with dedicated statistical programs. MS Excel cannot complete analyses with blank cells, and cells must be selected manually for analysis. In addition, it requires multiple steps of data transformation and formulas to plot survival analysis graphs, among others. The Megastat add-on program, which will be supported by MS Excel 2016 soon, would eliminate some limitations of using statistic formulas within MS Excel.

A Simple Microsoft Excel Method to Predict Antibiotic Outbreaks and Underutilization.

PubMed

Miglis, Cristina; Rhodes, Nathaniel J; Avedissian, Sean N; Zembower, Teresa R; Postelnick, Michael; Wunderink, Richard G; Sutton, Sarah H; Scheetz, Marc H

2017-07-01

Benchmarking strategies are needed to promote the appropriate use of antibiotics. We have adapted a simple regressive method in Microsoft Excel that is easily implementable and creates predictive indices. This method trends consumption over time and can identify periods of over- and underuse at the hospital level. Infect Control Hosp Epidemiol 2017;38:860-862.

76 FR 4897 - Submission for OMB Review; OMB Control No. 3090-0291; FSRS Registration and Prime Awardee Entity...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-27

... methods for submitting multiple FFATA subaward reports: A batch upload template using Microsoft Excel, an... three methods for submitting multiple FFATA subaward reports: A batch upload template using Microsoft Excel, an XML report submission template and an XML web service. These methods do take advantage of the...

Teaching Fundamental Skills in Microsoft Excel to First-Year Students in Quantitative Analysis

ERIC Educational Resources Information Center

Rubin, Samuel J.; Abrams, Binyomin

2015-01-01

Despite their technological savvy, most students entering university lack the necessary computer skills to succeed in a quantitative analysis course, in which they are often expected to input, analyze, and plot results of experiments without any previous formal education in Microsoft Excel or similar programs. This lack of formal education results…

Teaching Simulation and Computer-Aided Separation Optimization in Liquid Chromatography by Means of Illustrative Microsoft Excel Spreadsheets

ERIC Educational Resources Information Center

Fasoula, S.; Nikitas, P.; Pappa-Louisi, A.

2017-01-01

A series of Microsoft Excel spreadsheets were developed to simulate the process of separation optimization under isocratic and simple gradient conditions. The optimization procedure is performed in a stepwise fashion using simple macros for an automatic application of this approach. The proposed optimization approach involves modeling of the peak…

PETRO.CALC.PLOT, Microsoft Excel macros to aid petrologic interpretation

USGS Publications Warehouse

Sidder, G.B.

1994-01-01

PETRO.CALC.PLOT is a package of macros which normalizes whole-rock oxide data to 100%, calculates the cation percentages and molecular proportions used for normative mineral calculations, computes the apices for ternary diagrams, determines sums and ratios of specific elements of petrologic interest, and plots 33 X-Y graphs and five ternary diagrams. PETRO.CALC.PLOT also may be used to create other diagrams as desired by the user. The macros run in Microsoft Excel 3.0 and 4.0 for Macintosh computers and in Microsoft Excel 3.0 and 4.0 for Windows. Macros provided in PETRO.CALC.PLOT minimize repetition and time required to recalculate and plot whole-rock oxide data for petrologic analysis. ?? 1994.

FastStats: Chronic Liver Disease and Cirrhosis

MedlinePlus

... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel file Audio/Video file Apple Quicktime file RealPlayer file Text file Zip Archive file SAS file ePub file RIS file Page last reviewed: May 30, 2013 Page last updated: October 6, 2016 Content source: ...

A Simple Method for Reproducing Orbital Plots for Illustration Using Microsoft Paint and Microsoft Excel

NASA Astrophysics Data System (ADS)

Niebuhr, Cole

2018-04-01

Papers published in the astronomical community, particularly in the field of double star research, often contain plots that display the positions of the component stars relative to each other on a Cartesian coordinate plane. Due to the complexities of plotting a three-dimensional orbit into a two-dimensional image, it is often difficult to include an accurate reproduction of the orbit for comparison purposes. Methods to circumvent this obstacle do exist; however, many of these protocols result in low-quality blurred images or require specific and often expensive software. Here, a method is reported using Microsoft Paint and Microsoft Excel to produce high-quality images with an accurate reproduction of a partial orbit.

Astronaut Office Scheduling System Software

NASA Technical Reports Server (NTRS)

Brown, Estevancio

2010-01-01

AOSS is a highly efficient scheduling application that uses various tools to schedule astronauts weekly appointment information. This program represents an integration of many technologies into a single application to facilitate schedule sharing and management. It is a Windows-based application developed in Visual Basic. Because the NASA standard office automation load environment is Microsoft-based, Visual Basic provides AO SS developers with the ability to interact with Windows collaboration components by accessing objects models from applications like Outlook and Excel. This also gives developers the ability to create newly customizable components that perform specialized tasks pertaining to scheduling reporting inside the application. With this capability, AOSS can perform various asynchronous tasks, such as gathering/ sending/ managing astronauts schedule information directly to their Outlook calendars at any time.

78 FR 65440 - Notice of Funds Availability (NOFA) Inviting Applications for the Native American CDFI Assistance...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... of multiple mandatory documents including: (1) a PDF fillable Applicant intake form; (2) a Microsoft Excel Workbook; (3) a Microsoft Word Narrative template; and (4) other mandatory attachments. (Applicants must use the Microsoft Word Narrative template the CDFI Fund provides; alternative templates...

[Development of an Excel spreadsheet for meta-analysis of indirect and mixed treatment comparisons].

PubMed

Tobías, Aurelio; Catalá-López, Ferrán; Roqué, Marta

2014-01-01

Meta-analyses in clinical research usually aimed to evaluate treatment efficacy and safety in direct comparison with a unique comparator. Indirect comparisons, using the Bucher's method, can summarize primary data when information from direct comparisons is limited or nonexistent. Mixed comparisons allow combining estimates from direct and indirect comparisons, increasing statistical power. There is a need for simple applications for meta-analysis of indirect and mixed comparisons. These can easily be conducted using a Microsoft Office Excel spreadsheet. We developed a spreadsheet for indirect and mixed effects comparisons of friendly use for clinical researchers interested in systematic reviews, but non-familiarized with the use of more advanced statistical packages. The use of the proposed Excel spreadsheet for indirect and mixed comparisons can be of great use in clinical epidemiology to extend the knowledge provided by traditional meta-analysis when evidence from direct comparisons is limited or nonexistent.

Are Microsoft's Animated Interface Agents Helpful?

ERIC Educational Resources Information Center

Head, Allison J.

1998-01-01

Discusses interface agents and online help systems, focusing on Microsoft's animated office assistants. Highlights include intermediaries such as librarians in off-line reference problems; user complaints about online help systems; navigation problems; evaluation of the online office assistants; and categories of user queries to online help…

Software For Design And Analysis Of Tanks And Cylindrical Shells

NASA Technical Reports Server (NTRS)

Luz, Paul L.; Graham, Jerry B.

1995-01-01

Skin-stringer Tank Analysis Spreadsheet System (STASS) computer program developed for use as preliminary design software tool that enables quick-turnaround design and analysis of structural domes and cylindrical barrel sections in propellant tanks or other cylindrical shells. Determines minimum required skin thicknesses for domes and cylindrical shells to withstand material failure due to applied pressures (ullage and/or hydrostatic) and runs buckling analyses on cylindrical shells and skin-stringers. Implemented as workbook program, using Microsoft Excel v4.0 on Macintosh II. Also implemented using Microsoft Excel v4.0 for Microsoft Windows v3.1 IBM PC.

Understanding the Degrees of Freedom of Sample Variance by Using Microsoft Excel

ERIC Educational Resources Information Center

Ding, Jian-Hua; Jin, Xian-Wen; Shuai, Ling-Ying

2017-01-01

In this article, the degrees of freedom of the sample variance are simulated by using the Visual Basic for Applications of Microsoft Excel 2010. The simulation file dynamically displays why the sample variance should be calculated by dividing the sum of squared deviations by n-1 rather than n, which is helpful for students to grasp the meaning of…

A Microsoft-Excel-based tool for running and critically appraising network meta-analyses--an overview and application of NetMetaXL.

PubMed

Brown, Stephen; Hutton, Brian; Clifford, Tammy; Coyle, Doug; Grima, Daniel; Wells, George; Cameron, Chris

2014-09-29

The use of network meta-analysis has increased dramatically in recent years. WinBUGS, a freely available Bayesian software package, has been the most widely used software package to conduct network meta-analyses. However, the learning curve for WinBUGS can be daunting, especially for new users. Furthermore, critical appraisal of network meta-analyses conducted in WinBUGS can be challenging given its limited data manipulation capabilities and the fact that generation of graphical output from network meta-analyses often relies on different software packages than the analyses themselves. We developed a freely available Microsoft-Excel-based tool called NetMetaXL, programmed in Visual Basic for Applications, which provides an interface for conducting a Bayesian network meta-analysis using WinBUGS from within Microsoft Excel. . This tool allows the user to easily prepare and enter data, set model assumptions, and run the network meta-analysis, with results being automatically displayed in an Excel spreadsheet. It also contains macros that use NetMetaXL's interface to generate evidence network diagrams, forest plots, league tables of pairwise comparisons, probability plots (rankograms), and inconsistency plots within Microsoft Excel. All figures generated are publication quality, thereby increasing the efficiency of knowledge transfer and manuscript preparation. We demonstrate the application of NetMetaXL using data from a network meta-analysis published previously which compares combined resynchronization and implantable defibrillator therapy in left ventricular dysfunction. We replicate results from the previous publication while demonstrating result summaries generated by the software. Use of the freely available NetMetaXL successfully demonstrated its ability to make running network meta-analyses more accessible to novice WinBUGS users by allowing analyses to be conducted entirely within Microsoft Excel. NetMetaXL also allows for more efficient and transparent critical appraisal of network meta-analyses, enhanced standardization of reporting, and integration with health economic evaluations which are frequently Excel-based.

A Microsoft-Excel-based tool for running and critically appraising network meta-analyses—an overview and application of NetMetaXL

PubMed Central

2014-01-01

Background The use of network meta-analysis has increased dramatically in recent years. WinBUGS, a freely available Bayesian software package, has been the most widely used software package to conduct network meta-analyses. However, the learning curve for WinBUGS can be daunting, especially for new users. Furthermore, critical appraisal of network meta-analyses conducted in WinBUGS can be challenging given its limited data manipulation capabilities and the fact that generation of graphical output from network meta-analyses often relies on different software packages than the analyses themselves. Methods We developed a freely available Microsoft-Excel-based tool called NetMetaXL, programmed in Visual Basic for Applications, which provides an interface for conducting a Bayesian network meta-analysis using WinBUGS from within Microsoft Excel. . This tool allows the user to easily prepare and enter data, set model assumptions, and run the network meta-analysis, with results being automatically displayed in an Excel spreadsheet. It also contains macros that use NetMetaXL’s interface to generate evidence network diagrams, forest plots, league tables of pairwise comparisons, probability plots (rankograms), and inconsistency plots within Microsoft Excel. All figures generated are publication quality, thereby increasing the efficiency of knowledge transfer and manuscript preparation. Results We demonstrate the application of NetMetaXL using data from a network meta-analysis published previously which compares combined resynchronization and implantable defibrillator therapy in left ventricular dysfunction. We replicate results from the previous publication while demonstrating result summaries generated by the software. Conclusions Use of the freely available NetMetaXL successfully demonstrated its ability to make running network meta-analyses more accessible to novice WinBUGS users by allowing analyses to be conducted entirely within Microsoft Excel. NetMetaXL also allows for more efficient and transparent critical appraisal of network meta-analyses, enhanced standardization of reporting, and integration with health economic evaluations which are frequently Excel-based. PMID:25267416

Physiologically based pharmacokinetic modeling using microsoft excel and visual basic for applications.

PubMed

Marino, Dale J

2005-01-01

Abstract Physiologically based pharmacokinetic (PBPK) models are mathematical descriptions depicting the relationship between external exposure and internal dose. These models have found great utility for interspecies extrapolation. However, specialized computer software packages, which are not widely distributed, have typically been used for model development and utilization. A few physiological models have been reported using more widely available software packages (e.g., Microsoft Excel), but these tend to include less complex processes and dose metrics. To ascertain the capability of Microsoft Excel and Visual Basis for Applications (VBA) for PBPK modeling, models for styrene, vinyl chloride, and methylene chloride were coded in Advanced Continuous Simulation Language (ACSL), Excel, and VBA, and simulation results were compared. For styrene, differences between ACSL and Excel or VBA compartment concentrations and rates of change were less than +/-7.5E-10 using the same numerical integration technique and time step. Differences using VBA fixed step or ACSL Gear's methods were generally <1.00E-03, although larger differences involving very small values were noted after exposure transitions. For vinyl chloride and methylene chloride, Excel and VBA PBPK model dose metrics differed by no more than -0.013% or -0.23%, respectively, from ACSL results. These differences are likely attributable to different step sizes rather than different numerical integration techniques. These results indicate that Microsoft Excel and VBA can be useful tools for utilizing PBPK models, and given the availability of these software programs, it is hoped that this effort will help facilitate the use and investigation of PBPK modeling.

A Microsoft® Excel Simulation Illustrating the Central Limit Theorem's Appropriateness for Comparing the Difference between the Means of Any Two Populations

ERIC Educational Resources Information Center

Moen, David H.; Powell, John E.

2008-01-01

Using Microsoft® Excel, several interactive, computerized learning modules are developed to illustrate the Central Limit Theorem's appropriateness for comparing the difference between the means of any two populations. These modules are used in the classroom to enhance the comprehension of this theorem as well as the concepts that provide the…

On the Least-Squares Fitting of Slater-Type Orbitals with Gaussians: Reproduction of the STO-NG Fits Using Microsoft Excel and Maple

ERIC Educational Resources Information Center

Pye, Cory C.; Mercer, Colin J.

2012-01-01

The symbolic algebra program Maple and the spreadsheet Microsoft Excel were used in an attempt to reproduce the Gaussian fits to a Slater-type orbital, required to construct the popular STO-NG basis sets. The successes and pitfalls encountered in such an approach are chronicled. (Contains 1 table and 3 figures.)

The concurrent validity and intrarater reliability of the Microsoft Kinect to measure thoracic kyphosis.

PubMed

Quek, June; Brauer, Sandra G; Treleaven, Julia; Clark, Ross A

2017-09-01

This study aims to investigate the concurrent validity and intrarater reliability of the Microsoft Kinect to measure thoracic kyphosis against the Flexicurve. Thirty-three healthy individuals (age: 31±11.0 years, men: 17, height: 170.2±8.2 cm, weight: 64.2±12.0 kg) participated, with 29 re-examined for intrarater reliability 1-7 days later. Thoracic kyphosis was measured using the Flexicurve and the Microsoft Kinect consecutively in both standing and sitting positions. Both the kyphosis index and angle were calculated. The Microsoft Kinect showed excellent concurrent validity (intraclass correlation coefficient=0.76-0.82) and reliability (intraclass correlation coefficient=0.81-0.98) for measuring thoracic kyphosis (angle and index) in both standing and sitting postures. This study is the first to show that the Microsoft Kinect has excellent validity and intrarater reliability to measure thoracic kyphosis, which is promising for its use in the clinical setting.

Algorithm improvement program nuclide identification algorithm scoring criteria and scoring application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enghauser, Michael

2016-02-01

The goal of the Domestic Nuclear Detection Office (DNDO) Algorithm Improvement Program (AIP) is to facilitate gamma-radiation detector nuclide identification algorithm development, improvement, and validation. Accordingly, scoring criteria have been developed to objectively assess the performance of nuclide identification algorithms. In addition, a Microsoft Excel spreadsheet application for automated nuclide identification scoring has been developed. This report provides an overview of the equations, nuclide weighting factors, nuclide equivalencies, and configuration weighting factors used by the application for scoring nuclide identification algorithm performance. Furthermore, this report presents a general overview of the nuclide identification algorithm scoring application including illustrative examples.

2016 Research Outreach Program report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Hye Young; Kim, Yangkyu

2016-10-13

This paper is the research activity report for 4 weeks in LANL. Under the guidance of Dr. Lee, who performs nuclear physics research at LANSCE, LANL, I studied the Low Energy NZ (LENZ) setup and how to use the LENZ. First, I studied the LENZ chamber and Si detectors, and worked on detector calibrations, using the computer software, ROOT (CERN developed data analysis tool) and EXCEL (Microsoft office software). I also performed the calibration experiments that measure alpha particles emitted from a Th-229 source by using a S1-type detector (Si detector). And with Dr. Lee, we checked the result.

Confirmatory factor analysis using Microsoft Excel.

PubMed

Miles, Jeremy N V

2005-11-01

This article presents a method for using Microsoft (MS) Excel for confirmatory factor analysis (CFA). CFA is often seen as an impenetrable technique, and thus, when it is taught, there is frequently little explanation of the mechanisms or underlying calculations. The aim of this article is to demonstrate that this is not the case; it is relatively straightforward to produce a spreadsheet in MS Excel that can carry out simple CFA. It is possible, with few or no programming skills, to effectively program a CFA analysis and, thus, to gain insight into the workings of the procedure.

An integrated data-analysis and database system for AMS 14C

NASA Astrophysics Data System (ADS)

Kjeldsen, Henrik; Olsen, Jesper; Heinemeier, Jan

2010-04-01

AMSdata is the name of a combined database and data-analysis system for AMS 14C and stable-isotope work that has been developed at Aarhus University. The system (1) contains routines for data analysis of AMS and MS data, (2) allows a flexible and accurate description of sample extraction and pretreatment, also when samples are split into several fractions, and (3) keeps track of all measured, calculated and attributed data. The structure of the database is flexible and allows an unlimited number of measurement and pretreatment procedures. The AMS 14C data analysis routine is fairly advanced and flexible, and it can be easily optimized for different kinds of measuring processes. Technically, the system is based on a Microsoft SQL server and includes stored SQL procedures for the data analysis. Microsoft Office Access is used for the (graphical) user interface, and in addition Excel, Word and Origin are exploited for input and output of data, e.g. for plotting data during data analysis.

Growth, productivity, and scientific impact of sources of HIV/AIDS research information, with a focus on eastern and southern Africa.

PubMed

Bosire Onyancha, Omwoyo

2008-05-01

As channels of communicating HIV/AIDS research information, serial publications and particularly journals are increasingly used in response to the pandemic. The last few decades have witnessed a proliferation of sources of HIV/AIDS-related information, bringing many challenges to collection-development librarians as well as to researchers. This study uses an informetric approach to examine the growth, productivity and scientific impact of these sources, during the period 1980 to 2005, and especially to measure performance in the publication and dissemination of HIV/AIDS research about or from eastern or southern Africa. Data were collected from MEDLINE, Science Citation Index (SCI), Social Sciences Citation Index (SSCI), and Ulrich's Periodical Directory. The analysis used Sitkis version 1.5, Microsoft Office Access, Microsoft Office Excel, Bibexcel, and Citespace version 2.0.1. The specific objectives were to identify the number of sources of HIV/AIDS-related information that have been published in the region, the coverage of these in key bibliographic databases, the most commonly used publication type for HIV/AIDS research, the countries in which the sources are published, the sources' productivity in terms of numbers of papers and citations, the most influential sources, the subject coverage of the sources, and the core sources of HIV/AIDS-information.

SCEW: a Microsoft Excel add-in for easy creation of survival curves.

PubMed

Khan, Haseeb Ahmad

2006-07-01

Survival curves are frequently used for reporting survival or mortality outcomes of experimental pharmacological/toxicological studies and of clinical trials. Microsoft Excel is a simple and widely used tool for creation of numerous types of graphic presentations however it is difficult to create step-wise survival curves in Excel. Considering the familiarity of clinicians and biomedical scientists with Excel, an algorithm survival curves in Excel worksheet (SCEW) has been developed for easy creation of survival curves directly in Excel worksheets. The algorithm has been integrated in the form of Excel add-in for easy installation and usage. The program is based on modification of frequency data for binary break-up using the spreadsheet formula functions whereas a macro subroutine automates the creation of survival curves. The advantages of this program are simple data input, minimal procedural steps and the creation of survival curves in the familiar confines of Excel.

Software Re-Engineering of the Human Factors Analysis and Classification System - (Maintenance Extension) Using Object Oriented Methods in a Microsoft Environment

DTIC Science & Technology

2001-09-01

replication) -- all from Visual Basic and VBA . In fact, we found that the SQL Server engine actually had a plethora of options, most formidable of...2002, the new SQL Server 2000 database engine, and Microsoft Visual Basic.NET. This thesis describes our use of the Spiral Development Model to...versions of Microsoft products? Specifically, the pending release of Microsoft Office 2002, the new SQL Server 2000 database engine, and Microsoft

Microsoft excel spreadsheets for calculation of P-V-T relations and thermodynamic properties from equations of state of MgO, diamond and nine metals as pressure markers in high-pressure and high-temperature experiments

NASA Astrophysics Data System (ADS)

Sokolova, Tatiana S.; Dorogokupets, Peter I.; Dymshits, Anna M.; Danilov, Boris S.; Litasov, Konstantin D.

2016-09-01

We present Microsoft Excel spreadsheets for calculation of thermodynamic functions and P-V-T properties of MgO, diamond and 9 metals, Al, Cu, Ag, Au, Pt, Nb, Ta, Mo, and W, depending on temperature and volume or temperature and pressure. The spreadsheets include the most common pressure markers used in in situ experiments with diamond anvil cell and multianvil techniques. The calculations are based on the equation of state formalism via the Helmholtz free energy. The program was developed using Visual Basic for Applications in Microsoft Excel and is a time-efficient tool to evaluate volume, pressure and other thermodynamic functions using T-P and T-V data only as input parameters. This application is aimed to solve practical issues of high pressure experiments in geosciences and mineral physics.

imDEV: a graphical user interface to R multivariate analysis tools in Microsoft Excel.

PubMed

Grapov, Dmitry; Newman, John W

2012-09-01

Interactive modules for Data Exploration and Visualization (imDEV) is a Microsoft Excel spreadsheet embedded application providing an integrated environment for the analysis of omics data through a user-friendly interface. Individual modules enables interactive and dynamic analyses of large data by interfacing R's multivariate statistics and highly customizable visualizations with the spreadsheet environment, aiding robust inferences and generating information-rich data visualizations. This tool provides access to multiple comparisons with false discovery correction, hierarchical clustering, principal and independent component analyses, partial least squares regression and discriminant analysis, through an intuitive interface for creating high-quality two- and a three-dimensional visualizations including scatter plot matrices, distribution plots, dendrograms, heat maps, biplots, trellis biplots and correlation networks. Freely available for download at http://sourceforge.net/projects/imdev/. Implemented in R and VBA and supported by Microsoft Excel (2003, 2007 and 2010).

Progress Report--Microsoft Office 2003 Lynchburg College Tutorials

ERIC Educational Resources Information Center

Murray, Tom

2004-01-01

For the past several years Lynchburg College has developed Microsoft tutorials for use with academic classes and faculty, student and staff training. The tutorials are now used internationally. Last year Microsoft and Verizon sponsored a tutorial web site at http://www.officetutorials.com. This website recognizes ASCUE members for their wonderful…

A Longitudinal Study Assessing the Microsoft Office Skills Course

ERIC Educational Resources Information Center

Carpenter, Donald A.; McGinnis, Denise; Slauson, Gayla Jo; Snyder, Johnny

2013-01-01

This paper explains a four-year longitudinal study of the assessment process for a Microsoft Office skills course. It examines whether there is an increase in students' knowledge based on responses to pre- and post-surveys that asked students to evaluate how well they can do particular tasks. Classical classroom teaching methods were used in the…

A Microsoft Excel® 2010 Based Tool for Calculating Interobserver Agreement

PubMed Central

Azulay, Richard L

2011-01-01

This technical report provides detailed information on the rationale for using a common computer spreadsheet program (Microsoft Excel®) to calculate various forms of interobserver agreement for both continuous and discontinuous data sets. In addition, we provide a brief tutorial on how to use an Excel spreadsheet to automatically compute traditional total count, partial agreement-within-intervals, exact agreement, trial-by-trial, interval-by-interval, scored-interval, unscored-interval, total duration, and mean duration-per-interval interobserver agreement algorithms. We conclude with a discussion of how practitioners may integrate this tool into their clinical work. PMID:22649578

A microsoft excel(®) 2010 based tool for calculating interobserver agreement.

PubMed

Reed, Derek D; Azulay, Richard L

2011-01-01

This technical report provides detailed information on the rationale for using a common computer spreadsheet program (Microsoft Excel(®)) to calculate various forms of interobserver agreement for both continuous and discontinuous data sets. In addition, we provide a brief tutorial on how to use an Excel spreadsheet to automatically compute traditional total count, partial agreement-within-intervals, exact agreement, trial-by-trial, interval-by-interval, scored-interval, unscored-interval, total duration, and mean duration-per-interval interobserver agreement algorithms. We conclude with a discussion of how practitioners may integrate this tool into their clinical work.

76 FR 42164 - Announcement of Competition Under the America COMPETES Reauthorization Act of 2011

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-18

... listing will be in a format completely compatible with Microsoft Excel 2007 and contain the information... by VA. The narrative will be in a format completely compatible with Microsoft Word 2007, not...

Basic statistics with Microsoft Excel: a review.

PubMed

Divisi, Duilio; Di Leonardo, Gabriella; Zaccagna, Gino; Crisci, Roberto

2017-06-01

The scientific world is enriched daily with new knowledge, due to new technologies and continuous discoveries. The mathematical functions explain the statistical concepts particularly those of mean, median and mode along with those of frequency and frequency distribution associated to histograms and graphical representations, determining elaborative processes on the basis of the spreadsheet operations. The aim of the study is to highlight the mathematical basis of statistical models that regulate the operation of spreadsheets in Microsoft Excel.

Basic statistics with Microsoft Excel: a review

PubMed Central

Di Leonardo, Gabriella; Zaccagna, Gino; Crisci, Roberto

2017-01-01

The scientific world is enriched daily with new knowledge, due to new technologies and continuous discoveries. The mathematical functions explain the statistical concepts particularly those of mean, median and mode along with those of frequency and frequency distribution associated to histograms and graphical representations, determining elaborative processes on the basis of the spreadsheet operations. The aim of the study is to highlight the mathematical basis of statistical models that regulate the operation of spreadsheets in Microsoft Excel. PMID:28740690

78 FR 4812 - Endangered and Threatened Wildlife and Plants; Removal of the Valley Elderberry Longhorn Beetle...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-23

... a separate document, our preferred file format is Microsoft Word. If you attach multiple comments (such as form letters), our preferred format is a Microsoft Excel spreadsheet. (2) By Hard Copy: Submit...

PyGlobal: A toolkit for automated compilation of DFT-based descriptors.

PubMed

Nath, Shilpa R; Kurup, Sudheer S; Joshi, Kaustubh A

2016-06-15

Density Functional Theory (DFT)-based Global reactivity descriptor calculations have emerged as powerful tools for studying the reactivity, selectivity, and stability of chemical and biological systems. A Python-based module, PyGlobal has been developed for systematically parsing a typical Gaussian outfile and extracting the relevant energies of the HOMO and LUMO. Corresponding global reactivity descriptors are further calculated and the data is saved into a spreadsheet compatible with applications like Microsoft Excel and LibreOffice. The efficiency of the module has been accounted by measuring the time interval for randomly selected Gaussian outfiles for 1000 molecules. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Algorithm Improvement Program Nuclide Identification Algorithm Scoring Criteria And Scoring Application - DNDO.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enghauser, Michael

2015-02-01

The goal of the Domestic Nuclear Detection Office (DNDO) Algorithm Improvement Program (AIP) is to facilitate gamma-radiation detector nuclide identification algorithm development, improvement, and validation. Accordingly, scoring criteria have been developed to objectively assess the performance of nuclide identification algorithms. In addition, a Microsoft Excel spreadsheet application for automated nuclide identification scoring has been developed. This report provides an overview of the equations, nuclide weighting factors, nuclide equivalencies, and configuration weighting factors used by the application for scoring nuclide identification algorithm performance. Furthermore, this report presents a general overview of the nuclide identification algorithm scoring application including illustrative examples.

[Prevention of gastrointestinal bleeding in patients with advanced burns].

PubMed

Vagner, D O; Krylov, K M; Verbitsky, V G; Shlyk, I V

2018-01-01

To reduce the incidence of gastrointestinal bleeding in patients with advanced burns by developing a prophylactic algorithm. The study consisted of retrospective group of 488 patients with thermal burns grade II-III over 20% of body surface area and prospective group of 135 patients with a similar thermal trauma. Standard clinical and laboratory examination was applied. Instrumental survey included fibrogastroduodenoscopy, endoscopic pH-metry and invasive volumetric monitoring (PICCO plus). Statistical processing was carried out with Microsoft Office Excel 2007 and IBM SPSS 20.0. New algorithm significantly decreased incidence of gastrointestinal bleeding (p<0.001) and mortality rate (p=0.006) in patients with advanced burns.

GLobal Integrated Design Environment

NASA Technical Reports Server (NTRS)

Kunkel, Matthew; McGuire, Melissa; Smith, David A.; Gefert, Leon P.

2011-01-01

The GLobal Integrated Design Environment (GLIDE) is a collaborative engineering application built to resolve the design session issues of real-time passing of data between multiple discipline experts in a collaborative environment. Utilizing Web protocols and multiple programming languages, GLIDE allows engineers to use the applications to which they are accustomed in this case, Excel to send and receive datasets via the Internet to a database-driven Web server. Traditionally, a collaborative design session consists of one or more engineers representing each discipline meeting together in a single location. The discipline leads exchange parameters and iterate through their respective processes to converge on an acceptable dataset. In cases in which the engineers are unable to meet, their parameters are passed via e-mail, telephone, facsimile, or even postal mail. The result of this slow process of data exchange would elongate a design session to weeks or even months. While the iterative process remains in place, software can now exchange parameters securely and efficiently, while at the same time allowing for much more information about a design session to be made available. GLIDE is written in a compilation of several programming languages, including REALbasic, PHP, and Microsoft Visual Basic. GLIDE client installers are available to download for both Microsoft Windows and Macintosh systems. The GLIDE client software is compatible with Microsoft Excel 2000 or later on Windows systems, and with Microsoft Excel X or later on Macintosh systems. GLIDE follows the Client-Server paradigm, transferring encrypted and compressed data via standard Web protocols. Currently, the engineers use Excel as a front end to the GLIDE Client, as many of their custom tools run in Excel.

Spending Smart: How To Budget and Finance. Making Sense of Your Budget Dollars; Success with Budget Proposals; Encumbering Grants: Managing the Money; Write a Grant? Me?; Using Microsoft[R] Excel To Plan and Budget in Your School Library; Charging Ahead; The No-Money Lottery; Coffee, Anyone?

ERIC Educational Resources Information Center

Bernstein, Allison; Baule, Steve; Farmer, Lesley S. J.; Anderson, Cyndee; Barringer, Crystal; Buchanan, Peggy; Fullner, Sheryl Kindle; Knop, Kathi; Larson, Chris

2002-01-01

Includes eight articles that address issues related to budgeting and finances in secondary school libraries. Topics include limited budgets; budget proposals; administering grants; writing grants; using Microsoft's Excel software for budgeting; using credit cards for library purchases; offering prizes for donating books; and offering coffee and…

Preparing data for analysis using microsoft Excel.

PubMed

Elliott, Alan C; Hynan, Linda S; Reisch, Joan S; Smith, Janet P

2006-09-01

A critical component essential to good research is the accurate and efficient collection and preparation of data for analysis. Most medical researchers have little or no training in data management, often causing not only excessive time spent cleaning data but also a risk that the data set contains collection or recording errors. The implementation of simple guidelines based on techniques used by professional data management teams will save researchers time and money and result in a data set better suited to answer research questions. Because Microsoft Excel is often used by researchers to collect data, specific techniques that can be implemented in Excel are presented.

Comparing Hybrid Learning with Traditional Approaches on Learning the Microsoft Office Power Point 2003 Program in Tertiary Education

ERIC Educational Resources Information Center

Vernadakis, Nikolaos; Antoniou, Panagiotis; Giannousi, Maria; Zetou, Eleni; Kioumourtzoglou, Efthimis

2011-01-01

The purpose of this study was to determine the effectiveness of a hybrid learning approach to deliver a computer science course concerning the Microsoft office PowerPoint 2003 program in comparison to delivering the same course content in the form of traditional lectures. A hundred and seventy-two first year university students were randomly…

A Three-fold Outlook of the Ultra-Efficient Engine Technology Program Office (UEET)

NASA Technical Reports Server (NTRS)

Graham, La Quilia E.

2004-01-01

The Ultra-Efficient Engine Technology (UEET) Office at NASA Glenn Research Center is a part of the Aeronautics Directorate. Its vision is to develop and hand off revolutionary turbine engine propulsion technologies that will enable future generation vehicles over a wide range of flight speeds. There are seven different technology area projects of UEET. During my tenure at NASA Glenn Research Center, my assignment was to assist three different areas of UEET, simultaneously. I worked with Kathy Zona in Education Outreach, Lynn Boukalik in Knowledge Management, and Denise Busch with Financial Management. All of my tasks were related to the business side of UEET. As an intern with Education Outreach I created a word search to partner with an exhibit of a Turbine Engine developed out of the UEET office. This exhibit is a portable model that is presented to students of varying ages. The word search complies with National Standards for Education which are part of every science, engineering, and technology teachers curriculum. I also updated a Conference Planning/Workshop Excel Spreadsheet for the UEET Office. I collected and inputted facility overviews from various venues, both on and off site to determine where to hold upcoming conferences. I then documented which facilities were compliant with the Federal Emergency Management Agency's (FEMA) Hotel and Motel Fire Safety Act of 1990. The second area in which I worked was Knowledge Management. a large knowledge management system online which has extensive documentation that continually needs reviewing, updating, and archiving. Knowledge management is the ability to bring individual or team knowledge to an organizational level so that the information can be stored, shared, reviewed, archived. Livelink and a secure server are the Knowledge Management systems that UEET utilizes, Through these systems, I was able to obtain the documents needed for archiving. My assignment was to obtain intellectual property including reports, presentations, or any other documents related to the project. My next task was to document the author, date of creation, and all other properties of each document. To archive these documents I worked extensively with Microsoft Excel. different financial systems of accounting such as the SAP business accounting system. I also learned the best ways to present financial data and shadowed my mentor as she presented financial data to both UEET's project management and the Resources Analysis and Management Office (RAMO). I analyzed the June 2004 financial data of UEET and used Microsoft Excel to input the results of the data. This process made it easier to present the full cost of the project in the month of June. In addition I assisted in the End of the Year 2003 Reconciliation of Purchases of UEET.

Resampling methods in Microsoft Excel® for estimating reference intervals

PubMed Central

Theodorsson, Elvar

2015-01-01

Computer- intensive resampling/bootstrap methods are feasible when calculating reference intervals from non-Gaussian or small reference samples. Microsoft Excel® in version 2010 or later includes natural functions, which lend themselves well to this purpose including recommended interpolation procedures for estimating 2.5 and 97.5 percentiles.
The purpose of this paper is to introduce the reader to resampling estimation techniques in general and in using Microsoft Excel® 2010 for the purpose of estimating reference intervals in particular.
Parametric methods are preferable to resampling methods when the distributions of observations in the reference samples is Gaussian or can transformed to that distribution even when the number of reference samples is less than 120. Resampling methods are appropriate when the distribution of data from the reference samples is non-Gaussian and in case the number of reference individuals and corresponding samples are in the order of 40. At least 500-1000 random samples with replacement should be taken from the results of measurement of the reference samples. PMID:26527366

Resampling methods in Microsoft Excel® for estimating reference intervals.

PubMed

Theodorsson, Elvar

2015-01-01

Computer-intensive resampling/bootstrap methods are feasible when calculating reference intervals from non-Gaussian or small reference samples. Microsoft Excel® in version 2010 or later includes natural functions, which lend themselves well to this purpose including recommended interpolation procedures for estimating 2.5 and 97.5 percentiles. 
The purpose of this paper is to introduce the reader to resampling estimation techniques in general and in using Microsoft Excel® 2010 for the purpose of estimating reference intervals in particular.
 Parametric methods are preferable to resampling methods when the distributions of observations in the reference samples is Gaussian or can transformed to that distribution even when the number of reference samples is less than 120. Resampling methods are appropriate when the distribution of data from the reference samples is non-Gaussian and in case the number of reference individuals and corresponding samples are in the order of 40. At least 500-1000 random samples with replacement should be taken from the results of measurement of the reference samples.

imDEV: a graphical user interface to R multivariate analysis tools in Microsoft Excel

PubMed Central

Grapov, Dmitry; Newman, John W.

2012-01-01

Summary: Interactive modules for Data Exploration and Visualization (imDEV) is a Microsoft Excel spreadsheet embedded application providing an integrated environment for the analysis of omics data through a user-friendly interface. Individual modules enables interactive and dynamic analyses of large data by interfacing R's multivariate statistics and highly customizable visualizations with the spreadsheet environment, aiding robust inferences and generating information-rich data visualizations. This tool provides access to multiple comparisons with false discovery correction, hierarchical clustering, principal and independent component analyses, partial least squares regression and discriminant analysis, through an intuitive interface for creating high-quality two- and a three-dimensional visualizations including scatter plot matrices, distribution plots, dendrograms, heat maps, biplots, trellis biplots and correlation networks. Availability and implementation: Freely available for download at http://sourceforge.net/projects/imdev/. Implemented in R and VBA and supported by Microsoft Excel (2003, 2007 and 2010). Contact: John.Newman@ars.usda.gov Supplementary Information: Installation instructions, tutorials and users manual are available at http://sourceforge.net/projects/imdev/. PMID:22815358

Paskibraka Member Selection Using A Combination Of AHP and TOPSIS Methods On The Office Of Youth And Sports Of Kutai Kartanegara Regency

NASA Astrophysics Data System (ADS)

Maharani, Septya; Hatta, Heliza Rahmania; Anzhari, Afif Nur; Khairina, Dyna Marisa

2018-02-01

Paskibraka as troops whose job is to flap the heritage duplicates flag. To become a Paskibraka a selection that participants are high school students are made. Because the number of participants of the selection of many support systems to facilitate the assessment process is made. This system uses Analytical Hierarchy Process (AHP) to determine the weight value criteria that comprise the value of the interview, health, physical, .height and value rules for marching as well as using Technique For Others Preference by Similarity to Ideal Solution (TOPSIS) methods to seek best alternative participants. The calculation results of 21 alternative names best male and female of the participants and their school origin. The system has also been tested by performing the calculations manually using Microsoft Excel (Ms.Excel) to calculate the calculation of the system using AHP and TOPSIS.

Resource Management in the Microgravity Science Division

NASA Technical Reports Server (NTRS)

Casselle, Justine

2004-01-01

In the Microgravity Science Division, the primary responsibilities of the Business Management Office are resource management and data collection. Resource management involves working with a budget to do a number of specific projects, while data collection involves collecting information such as the status of projects and workforce hours. This summer in the Business Management Office I assisted Margie Allen with resource planning and the implementation of specific microgravity projects. One of the main duties of a Project Control Specialists, such as my mentor, is to monitor and analyze project manager s financial plans. Project managers work from the bottom up to determine how much money their project will cost. They then set up a twelve month operating plan which shows when money will be spent. I assisted my mentor in checking for variances in her data against those of the project managers. In order to successfully check for those variances, we had to understand: where the project is including plans vs. actual performance, why it is in its present condition, and what the future impact will be based on known budgetary parameters. Our objective was to make sure that the plan, or estimated resources input, are a valid reflection of the actual cost. To help with my understanding of the process, over the course of my tenure I had to obtain skills in Microsoft Excel and Microsoft Access.

Comparative attitude and plans of the medical students and young Nepalese doctors.

PubMed

Lakhey, M; Lakhey, S; Niraula, S R; Jha, D; Pant, R

2009-01-01

Many doctors are leaving Nepal to work abroad. To understand this problem better, we decided to study the attitude and plans of young doctors and medical students. This cross-sectional study was conducted at Kathmandu Medical College involving 65 first year medical students, 100 interns and 100 house officers. The data collected was entered in Microsoft excel and analysed by SPSS (Statistical Package for Social Sciences) programme. Chi-square test was used to compare two proportions. Significance level was set at 5%. Only 2% house officers said that their job prospects were excellent as compared to 22.4% of students, whereas 20% house officers as compared to 9% students thought job prospects in Nepal were poor (p= 0.003). Eighty two percent of students thought that a doctor's service to his country was very important as compared to 51% of interns (p= 0.001) and 58% of house officers. Forty percent of students, 58% of interns and 48% of house officers (no statistical significance between the three groups) planned to migrate to a developed country after graduation. Eighty eight percent of students, 89% interns and 74% of house officers (no statistical significant differences between the three groups) were of the opinion that improving career opportunities or working environment of the doctor could make the profession more attractive. Although majority of students, interns and house officers were of the opinion that a doctor's service to his community/country was very important, almost half of them still planned to migrate to a developed country after graduation. Improving the chances of professional advancement and professional working environment can make the profession more attractive, and therefore, may decrease this tendency for brain drain from our country.

A personal digital assistant application (MobilDent) for dental fieldwork data collection, information management and database handling.

PubMed

Forsell, M; Häggström, M; Johansson, O; Sjögren, P

2008-11-08

To develop a personal digital assistant (PDA) application for oral health assessment fieldwork, including back-office and database systems (MobilDent). System design, construction and implementation of PDA, back-office and database systems. System requirements for MobilDent were collected, analysed and translated into system functions. User interfaces were implemented and system architecture was outlined. MobilDent was based on a platform with. NET (Microsoft) components, using an SQL Server 2005 (Microsoft) for data storage with Windows Mobile (Microsoft) operating system. The PDA devices were Dell Axim. System functions and user interfaces were specified for MobilDent. User interfaces for PDA, back-office and database systems were based on. NET programming. The PDA user interface was based on Windows suitable to a PDA display, whereas the back-office interface was designed for a normal-sized computer screen. A synchronisation module (MS Active Sync, Microsoft) was used to enable download of field data from PDA to the database. MobilDent is a feasible application for oral health assessment fieldwork, and the oral health assessment database may prove a valuable source for care planning, educational and research purposes. Further development of the MobilDent system will include wireless connectivity with download-on-demand technology.

A Spreadsheet for the Mixing of a Row of Jets with a Confined Crossflow

NASA Technical Reports Server (NTRS)

Holderman, J. D.; Smith, T. D.; Clisset, J. R.; Lear, W. E.

2005-01-01

An interactive computer code, written with a readily available software program, Microsoft Excel (Microsoft Corporation, Redmond, WA) is presented which displays 3 D oblique plots of a conserved scalar distribution downstream of jets mixing with a confined crossflow, for a single row, double rows, or opposed rows of jets with or without flow area convergence and/or a non-uniform crossflow scalar distribution. This project used a previously developed empirical model of jets mixing in a confined crossflow to create an Microsoft Excel spreadsheet that can output the profiles of a conserved scalar for jets injected into a confined crossflow given several input variables. The program uses multiple spreadsheets in a single Microsoft Excel notebook to carry out the modeling. The first sheet contains the main program, controls for the type of problem to be solved, and convergence criteria. The first sheet also provides for input of the specific geometry and flow conditions. The second sheet presents the results calculated with this routine to show the effects on the mixing of varying flow and geometric parameters. Comparisons are also made between results from the version of the empirical correlations implemented in the spreadsheet and the versions originally written in Applesoft BASIC (Apple Computer, Cupertino, CA) in the 1980's.

A Spreadsheet for the Mixing of a Row of Jets with a Confined Crossflow. Supplement

NASA Technical Reports Server (NTRS)

Holderman, J. D.; Smith, T. D.; Clisset, J. R.; Lear, W. E.

2005-01-01

An interactive computer code, written with a readily available software program, Microsoft Excel (Microsoft Corporation, Redmond, WA) is presented which displays 3 D oblique plots of a conserved scalar distribution downstream of jets mixing with a confined crossflow, for a single row, double rows, or opposed rows of jets with or without flow area convergence and/or a non-uniform crossflow scalar distribution. This project used a previously developed empirical model of jets mixing in a confined crossflow to create an Microsoft Excel spreadsheet that can output the profiles of a conserved scalar for jets injected into a confined crossflow given several input variables. The program uses multiple spreadsheets in a single Microsoft Excel notebook to carry out the modeling. The first sheet contains the main program, controls for the type of problem to be solved, and convergence criteria. The first sheet also provides for input of the specific geometry and flow conditions. The second sheet presents the results calculated with this routine to show the effects on the mixing of varying flow and geometric parameters. Comparisons are also made between results from the version of the empirical correlations implemented in the spreadsheet and the versions originally written in Applesoft BASIC (Apple Computer, Cupertino, CA) in the 1980's.

78 FR 58507 - Endangered and Threatened Wildlife and Plants; 90-Day Finding on a Petition To List 10 Sturgeon...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-24

... Microsoft Excel. By Hard Copy: U.S. mail or hand-delivery: Public Comments Processing, Attn: FWS-HQ-ES-2013... procedures. If you attach your comments as a separate document, our preferred file format is Microsoft Word...

Visual Communication: Integrating Visual Instruction into Business Communication Courses

ERIC Educational Resources Information Center

Baker, William H.

2006-01-01

Business communication courses are ideal for teaching visual communication principles and techniques. Many assignments lend themselves to graphic enrichment, such as flyers, handouts, slide shows, Web sites, and newsletters. Microsoft Publisher and Microsoft PowerPoint are excellent tools for these assignments, with Publisher being best for…

Excel2Genie: A Microsoft Excel application to improve the flexibility of the Genie-2000 Spectroscopic software.

PubMed

Forgács, Attila; Balkay, László; Trón, Lajos; Raics, Péter

2014-12-01

Excel2Genie, a simple and user-friendly Microsoft Excel interface, has been developed to the Genie-2000 Spectroscopic Software of Canberra Industries. This Excel application can directly control Canberra Multichannel Analyzer (MCA), process the acquired data and visualize them. Combination of Genie-2000 with Excel2Genie results in remarkably increased flexibility and a possibility to carry out repetitive data acquisitions even with changing parameters and more sophisticated analysis. The developed software package comprises three worksheets: display parameters and results of data acquisition, data analysis and mathematical operations carried out on the measured gamma spectra. At the same time it also allows control of these processes. Excel2Genie is freely available to assist gamma spectrum measurements and data evaluation by the interested Canberra users. With access to the Visual Basic Application (VBA) source code of this application users are enabled to modify the developed interface according to their intentions. Copyright © 2014 Elsevier Ltd. All rights reserved.

Environmental flow allocation and statistics calculator

USGS Publications Warehouse

Konrad, Christopher P.

2011-01-01

The Environmental Flow Allocation and Statistics Calculator (EFASC) is a computer program that calculates hydrologic statistics based on a time series of daily streamflow values. EFASC will calculate statistics for daily streamflow in an input file or will generate synthetic daily flow series from an input file based on rules for allocating and protecting streamflow and then calculate statistics for the synthetic time series. The program reads dates and daily streamflow values from input files. The program writes statistics out to a series of worksheets and text files. Multiple sites can be processed in series as one run. EFASC is written in MicrosoftRegistered Visual BasicCopyright for Applications and implemented as a macro in MicrosoftOffice Excel 2007Registered. EFASC is intended as a research tool for users familiar with computer programming. The code for EFASC is provided so that it can be modified for specific applications. All users should review how output statistics are calculated and recognize that the algorithms may not comply with conventions used to calculate streamflow statistics published by the U.S. Geological Survey.

Cryptanalysis on classical cipher based on Indonesian language

NASA Astrophysics Data System (ADS)

Marwati, R.; Yulianti, K.

2018-05-01

Cryptanalysis is a process of breaking a cipher in an illegal decryption. This paper discusses about encryption some classic cryptography, breaking substitution cipher and stream cipher, and increasing its security. Encryption and ciphering based on Indonesian Language text. Microsoft Word and Microsoft Excel were chosen as ciphering and breaking tools.

Generating variable and random schedules of reinforcement using Microsoft Excel macros.

PubMed

Bancroft, Stacie L; Bourret, Jason C

2008-01-01

Variable reinforcement schedules are used to arrange the availability of reinforcement following varying response ratios or intervals of time. Random reinforcement schedules are subtypes of variable reinforcement schedules that can be used to arrange the availability of reinforcement at a constant probability across number of responses or time. Generating schedule values for variable and random reinforcement schedules can be difficult. The present article describes the steps necessary to write macros in Microsoft Excel that will generate variable-ratio, variable-interval, variable-time, random-ratio, random-interval, and random-time reinforcement schedule values.

Inserting Phase Change Lines into Microsoft Excel® Graphs.

PubMed

Dubuque, Erick M

2015-10-01

Microsoft Excel® is a popular graphing tool used by behavior analysts to visually display data. However, this program is not always friendly to the graphing conventions used by behavior analysts. For example, adding phase change lines has typically been a cumbersome process involving the insertion of line objects that do not move when new data is added to a graph. The purpose of this article is to describe a novel way to add phase change lines that move when new data is added and when graphs are resized.

LICSS - a chemical spreadsheet in microsoft excel

PubMed Central

2012-01-01

Background Representations of chemical datasets in spreadsheet format are important for ready data assimilation and manipulation. In addition to the normal spreadsheet facilities, chemical spreadsheets need to have visualisable chemical structures and data searchable by chemical as well as textual queries. Many such chemical spreadsheet tools are available, some operating in the familiar Microsoft Excel environment. However, within this group, the performance of Excel is often compromised, particularly in terms of the number of compounds which can usefully be stored on a sheet. Summary LICSS is a lightweight chemical spreadsheet within Microsoft Excel for Windows. LICSS stores structures solely as Smiles strings. Chemical operations are carried out by calling Java code modules which use the CDK, JChemPaint and OPSIN libraries to provide cheminformatics functionality. Compounds in sheets or charts may be visualised (individually or en masse), and sheets may be searched by substructure or similarity. All the molecular descriptors available in CDK may be calculated for compounds (in batch or on-the-fly), and various cheminformatic operations such as fingerprint calculation, Sammon mapping, clustering and R group table creation may be carried out. We detail here the features of LICSS and how they are implemented. We also explain the design criteria, particularly in terms of potential corporate use, which led to this particular implementation. Conclusions LICSS is an Excel-based chemical spreadsheet with a difference: • It can usefully be used on sheets containing hundreds of thousands of compounds; it doesn't compromise the normal performance of Microsoft Excel • It is designed to be installed and run in environments in which users do not have admin privileges; installation involves merely file copying, and sharing of LICSS sheets invokes automatic installation • It is free and extensible LICSS is open source software and we hope sufficient detail is provided here to enable developers to add their own features and share with the community. PMID:22301088

ARS-Media for Excel

USDA-ARS?s Scientific Manuscript database

ARS-Media for Excel is an ion solution calculator that uses Microsoft Excel to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Thus, the recipes are genera...

How Statistics "Excel" Online.

ERIC Educational Resources Information Center

Chao, Faith; Davis, James

2000-01-01

Discusses the use of Microsoft Excel software and provides examples of its use in an online statistics course at Golden Gate University in the areas of randomness and probability, sampling distributions, confidence intervals, and regression analysis. (LRW)

77 FR 53164 - Magnuson-Stevens Fishery Conservation and Management Act Provisions; Fisheries of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-31

... Microsoft Word, Microsoft Excel, WordPerfect, or Adobe PDF file formats only. FOR FURTHER INFORMATION...). The closure was implemented based on advice from the U.S. Food and Drug Administration (FDA) after... Management Plan (FMP). Since the implementation of the closure, NOAA's National Ocean Service has provided...

Using Microsoft Excel to compute the 5% overall site X/Q value and the 95th percentile of the distribution of doses to the nearest maximally exposed offsite individual (MEOI).

PubMed

Vickers, Linda D

2010-05-01

This paper describes the method using Microsoft Excel (Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399) to compute the 5% overall site X/Q value and the 95th percentile of the distribution of doses to the nearest maximally exposed offsite individual (MEOI) in accordance with guidance from DOE-STD-3009-1994 and U.S. NRC Regulatory Guide 1.145-1982. The accurate determination of the 5% overall site X/Q value is the most important factor in the computation of the 95th percentile of the distribution of doses to the nearest MEOI. This method should be used to validate software codes that compute the X/Q. The 95th percentile of the distribution of doses to the nearest MEOI must be compared to the U.S. DOE Evaluation Guide of 25 rem to determine the relative severity of hazard to the public from a postulated, unmitigated design basis accident that involves an offsite release of radioactive material.

Enhancing Teaching using MATLAB Add-Ins for Excel

ERIC Educational Resources Information Center

Hamilton, Paul V.

2004-01-01

In this paper I will illustrate how to extend the capabilities of Microsoft Excel spreadsheets with add-ins created by MATLAB. Excel provides a broad array of fundamental tools but often comes up short when more sophisticated scenarios are involved. To overcome this short-coming of Excel while retaining its ease of use, I will describe how…

Generating Variable and Random Schedules of Reinforcement Using Microsoft Excel Macros

PubMed Central

Bancroft, Stacie L; Bourret, Jason C

2008-01-01

Variable reinforcement schedules are used to arrange the availability of reinforcement following varying response ratios or intervals of time. Random reinforcement schedules are subtypes of variable reinforcement schedules that can be used to arrange the availability of reinforcement at a constant probability across number of responses or time. Generating schedule values for variable and random reinforcement schedules can be difficult. The present article describes the steps necessary to write macros in Microsoft Excel that will generate variable-ratio, variable-interval, variable-time, random-ratio, random-interval, and random-time reinforcement schedule values. PMID:18595286

Chromatographic peak resolution using Microsoft Excel Solver. The merit of time shifting input arrays.

PubMed

Dasgupta, Purnendu K

2008-12-05

Resolution of overlapped chromatographic peaks is generally accomplished by modeling the peaks as Gaussian or modified Gaussian functions. It is possible, even preferable, to use actual single analyte input responses for this purpose and a nonlinear least squares minimization routine such as that provided by Microsoft Excel Solver can then provide the resolution. In practice, the quality of the results obtained varies greatly due to small shifts in retention time. I show here that such deconvolution can be considerably improved if one or more of the response arrays are iteratively shifted in time.

Emissions & Generation Resource Integrated Database (eGRID), eGRID2010

EPA Pesticide Factsheets

The Emissions & Generation Resource Integrated Database (eGRID) is a comprehensive source of data on the environmental characteristics of almost all electric power generated in the United States. These environmental characteristics include air emissions for nitrogen oxides, sulfur dioxide, carbon dioxide, methane, and nitrous oxide; emissions rates; net generation; resource mix; and many other attributes.eGRID2010 contains the complete release of year 2007 data, as well as years 2005 and 2004 data. Excel spreadsheets, full documentation, summary data, eGRID subregion and NERC region representational maps, and GHG emission factors are included in this data set. The Archived data in eGRID2002 contain years 1996 through 2000 data.For year 2007 data, the first Microsoft Excel workbook, Plant, contains boiler, generator, and plant spreadsheets. The second Microsoft Excel workbook, Aggregation, contains aggregated data by state, electric generating company, parent company, power control area, eGRID subregion, NERC region, and U.S. total levels. The third Microsoft Excel workbook, ImportExport, contains state import-export data, as well as U.S. generation and consumption data for years 2007, 2005, and 2004. For eGRID data for years 2005 and 2004, a user friendly web application, eGRIDweb, is available to select, view, print, and export specified data.

WASP (Write a Scientific Paper) using Excel - 13: Correlation and Regression.

PubMed

Grech, Victor

2018-07-01

Correlation and regression measure the closeness of association between two continuous variables. This paper explains how to perform these tests in Microsoft Excel and their interpretation, as well as how to apply these tests dynamically using Excel's functions. Copyright © 2018 Elsevier B.V. All rights reserved.

Analysis of Variance with Summary Statistics in Microsoft® Excel®

ERIC Educational Resources Information Center

Larson, David A.; Hsu, Ko-Cheng

2010-01-01

Students regularly are asked to solve Single Factor Analysis of Variance problems given only the sample summary statistics (number of observations per category, category means, and corresponding category standard deviations). Most undergraduate students today use Excel for data analysis of this type. However, Excel, like all other statistical…

Getting the Best out of Excel

ERIC Educational Resources Information Center

Heys, Chris

2008-01-01

Excel, Microsoft's spreadsheet program, offers several tools which have proven useful in solving some optimization problems that arise in operations research. We will look at two such tools, the Excel modules called Solver and Goal Seek--this after deriving an equation, called the "cash accumulation equation", to be used in conjunction with them.

A Realistic Data Warehouse Project: An Integration of Microsoft Access[R] and Microsoft Excel[R] Advanced Features and Skills

ERIC Educational Resources Information Center

King, Michael A.

2009-01-01

Business intelligence derived from data warehousing and data mining has become one of the most strategic management tools today, providing organizations with long-term competitive advantages. Business school curriculums and popular database textbooks cover data warehousing, but the examples and problem sets typically are small and unrealistic. The…

Using Microsoft Excel to teach statistics in a graduate advanced practice nursing program.

PubMed

DiMaria-Ghalili, Rose Ann; Ostrow, C Lynne

2009-02-01

This article describes the authors' experiences during 3 years of using Microsoft Excel to teach graduate-level statistics, as part of the research core required by the American Association of Colleges of Nursing for all professional graduate nursing programs. The advantages to using this program instead of specialized statistical programs are ease of accessibility, increased transferability of skills, and reduced cost for students. The authors share their insight about realistic goals for teaching statistics to master's-level students and the resources that are available to faculty to help them to learn and use Excel in their courses. Several online sites that are excellent resources for both faculty and students are discussed. Detailed attention is given to an online course (Carnegie-Mellon University Open Learning Initiative, n.d.), which the authors have incorporated into their graduate-level research methods course.

LICSS - a chemical spreadsheet in microsoft excel.

PubMed

Lawson, Kevin R; Lawson, Jonty

2012-02-02

Representations of chemical datasets in spreadsheet format are important for ready data assimilation and manipulation. In addition to the normal spreadsheet facilities, chemical spreadsheets need to have visualisable chemical structures and data searchable by chemical as well as textual queries. Many such chemical spreadsheet tools are available, some operating in the familiar Microsoft Excel environment. However, within this group, the performance of Excel is often compromised, particularly in terms of the number of compounds which can usefully be stored on a sheet. LICSS is a lightweight chemical spreadsheet within Microsoft Excel for Windows. LICSS stores structures solely as Smiles strings. Chemical operations are carried out by calling Java code modules which use the CDK, JChemPaint and OPSIN libraries to provide cheminformatics functionality. Compounds in sheets or charts may be visualised (individually or en masse), and sheets may be searched by substructure or similarity. All the molecular descriptors available in CDK may be calculated for compounds (in batch or on-the-fly), and various cheminformatic operations such as fingerprint calculation, Sammon mapping, clustering and R group table creation may be carried out.We detail here the features of LICSS and how they are implemented. We also explain the design criteria, particularly in terms of potential corporate use, which led to this particular implementation. LICSS is an Excel-based chemical spreadsheet with a difference:• It can usefully be used on sheets containing hundreds of thousands of compounds; it doesn't compromise the normal performance of Microsoft Excel• It is designed to be installed and run in environments in which users do not have admin privileges; installation involves merely file copying, and sharing of LICSS sheets invokes automatic installation• It is free and extensibleLICSS is open source software and we hope sufficient detail is provided here to enable developers to add their own features and share with the community.

Improving the Teaching of Microsoft Excel: Traditional Book versus Online Platform

ERIC Educational Resources Information Center

Brooks, Stoney; Taylor, Joseph

2016-01-01

The authors explore the differences between traditional, book-based methods of teaching Excel and online, platform-supported methods by comparing teaching students in different locations, with and without online support. As Excel is a critical skill for business majors, the authors investigate which methods and locations provide the highest…

GenAlEx 6.5: genetic analysis in Excel. Population genetic software for teaching and research--an update.

PubMed

Peakall, Rod; Smouse, Peter E

2012-10-01

GenAlEx: Genetic Analysis in Excel is a cross-platform package for population genetic analyses that runs within Microsoft Excel. GenAlEx offers analysis of diploid codominant, haploid and binary genetic loci and DNA sequences. Both frequency-based (F-statistics, heterozygosity, HWE, population assignment, relatedness) and distance-based (AMOVA, PCoA, Mantel tests, multivariate spatial autocorrelation) analyses are provided. New features include calculation of new estimators of population structure: G'(ST), G''(ST), Jost's D(est) and F'(ST) through AMOVA, Shannon Information analysis, linkage disequilibrium analysis for biallelic data and novel heterogeneity tests for spatial autocorrelation analysis. Export to more than 30 other data formats is provided. Teaching tutorials and expanded step-by-step output options are included. The comprehensive guide has been fully revised. GenAlEx is written in VBA and provided as a Microsoft Excel Add-in (compatible with Excel 2003, 2007, 2010 on PC; Excel 2004, 2011 on Macintosh). GenAlEx, and supporting documentation and tutorials are freely available at: http://biology.anu.edu.au/GenAlEx. rod.peakall@anu.edu.au.

Random Vibrations

NASA Technical Reports Server (NTRS)

Messaro. Semma; Harrison, Phillip

2010-01-01

Ares I Zonal Random vibration environments due to acoustic impingement and combustion processes are develop for liftoff, ascent and reentry. Random Vibration test criteria for Ares I Upper Stage pyrotechnic components are developed by enveloping the applicable zonal environments where each component is located. Random vibration tests will be conducted to assure that these components will survive and function appropriately after exposure to the expected vibration environments. Methodology: Random Vibration test criteria for Ares I Upper Stage pyrotechnic components were desired that would envelope all the applicable environments where each component was located. Applicable Ares I Vehicle drawings and design information needed to be assessed to determine the location(s) for each component on the Ares I Upper Stage. Design and test criteria needed to be developed by plotting and enveloping the applicable environments using Microsoft Excel Spreadsheet Software and documenting them in a report Using Microsoft Word Processing Software. Conclusion: Random vibration liftoff, ascent, and green run design & test criteria for the Upper Stage Pyrotechnic Components were developed by using Microsoft Excel to envelope zonal environments applicable to each component. Results were transferred from Excel into a report using Microsoft Word. After the report is reviewed and edited by my mentor it will be submitted for publication as an attachment to a memorandum. Pyrotechnic component designers will extract criteria from my report for incorporation into the design and test specifications for components. Eventually the hardware will be tested to the environments I developed to assure that the components will survive and function appropriately after exposure to the expected vibration environments.

A Tools-Based Approach to Teaching Data Mining Methods

ERIC Educational Resources Information Center

Jafar, Musa J.

2010-01-01

Data mining is an emerging field of study in Information Systems programs. Although the course content has been streamlined, the underlying technology is still in a state of flux. The purpose of this paper is to describe how we utilized Microsoft Excel's data mining add-ins as a front-end to Microsoft's Cloud Computing and SQL Server 2008 Business…

A VBA Desktop Database for Proposal Processing at National Optical Astronomy Observatories

NASA Astrophysics Data System (ADS)

Brown, Christa L.

National Optical Astronomy Observatories (NOAO) has developed a relational Microsoft Windows desktop database using Microsoft Access and the Microsoft Office programming language, Visual Basic for Applications (VBA). The database is used to track data relating to observing proposals from original receipt through the review process, scheduling, observing, and final statistical reporting. The database has automated proposal processing and distribution of information. It allows NOAO to collect and archive data so as to query and analyze information about our science programs in new ways.

Actual Readers versus Implied Readers: Role Conflicts in Office 97.

ERIC Educational Resources Information Center

Shroyer, Roberta

2000-01-01

Explains the controversy surrounding the Office Assistant ("Paper-Clip") in Microsoft's Office 97. Discusses why actual readers rejected the default Office Assistant's role as implied writer and rebelled against the reader role implied for them. Notes users resented its intrusive behavior, rejected its implied writer role, and refused to…

WASP (Write a Scientific Paper) using Excel 9: Analysis of variance.

PubMed

Grech, Victor

2018-06-01

Analysis of variance (ANOVA) may be required by researchers as an inferential statistical test when more than two means require comparison. This paper explains how to perform ANOVA in Microsoft Excel. Copyright © 2018 Elsevier B.V. All rights reserved.

Institutional Transformation 2.5 Building Module Help Manual.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Villa, Daniel

The Institutional Transformation (IX) building module is a software tool developed at Sandia National Laboratories to evaluate energy conservation measures (ECMs) on hundreds of DOE-2 building energy models simultaneously. In IX, ECMs can be designed through parameterizing DOE-2 building models and doing further processing via visual basic for applications subroutines. IX provides the functionality to handle multiple building models for different years, which enables incrementally changing a site of hundreds of buildings over time. It also enables evaluation of the effects of changing climate, comparisons between data and modeling results, and energy use of centralized utility buildings (CUBs). IX consistsmore » of a Microsoft Excel(r) user interface, Microsoft Access(r) database, and Microsoft Excel(r) CUB build utility whose functionalities are described in detail in this report. In addition to descriptions of the user interfaces, descriptions of every ECM already designed in IX is included. SAND2016-8983 IX 2.5 Help Manual« less

Using and Evaluating Resampling Simulations in SPSS and Excel.

ERIC Educational Resources Information Center

Smith, Brad

2003-01-01

Describes and evaluates three computer-assisted simulations used with Statistical Package for the Social Sciences (SPSS) and Microsoft Excel. Designed the simulations to reinforce and enhance student understanding of sampling distributions, confidence intervals, and significance tests. Reports evaluations revealed improved student comprehension of…

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel: I. Principles and some general algorithms.

PubMed

Langenbucher, Frieder

2002-01-01

Most computations in the field of in vitro/in vivo correlations can be handled directly by Excel worksheets, without the need for specialized software. Following a summary of Excel features, applications are illustrated for numerical computation of AUC and Mean, Wagner-Nelson and Loo-Riegelman absorption plots, and polyexponential curve fitting.

GenAlEx 6.5: genetic analysis in Excel. Population genetic software for teaching and research—an update

PubMed Central

Peakall, Rod; Smouse, Peter E.

2012-01-01

Summary: GenAlEx: Genetic Analysis in Excel is a cross-platform package for population genetic analyses that runs within Microsoft Excel. GenAlEx offers analysis of diploid codominant, haploid and binary genetic loci and DNA sequences. Both frequency-based (F-statistics, heterozygosity, HWE, population assignment, relatedness) and distance-based (AMOVA, PCoA, Mantel tests, multivariate spatial autocorrelation) analyses are provided. New features include calculation of new estimators of population structure: G′ST, G′′ST, Jost’s Dest and F′ST through AMOVA, Shannon Information analysis, linkage disequilibrium analysis for biallelic data and novel heterogeneity tests for spatial autocorrelation analysis. Export to more than 30 other data formats is provided. Teaching tutorials and expanded step-by-step output options are included. The comprehensive guide has been fully revised. Availability and implementation: GenAlEx is written in VBA and provided as a Microsoft Excel Add-in (compatible with Excel 2003, 2007, 2010 on PC; Excel 2004, 2011 on Macintosh). GenAlEx, and supporting documentation and tutorials are freely available at: http://biology.anu.edu.au/GenAlEx. Contact: rod.peakall@anu.edu.au PMID:22820204

Concept, Content, Construction, and Contingencies: Getting the Horse before the PowerPoint Cart

ERIC Educational Resources Information Center

DuFrene, Debbie D.; Lehman, Carol M.

2004-01-01

The phrase "death by PowerPoint" was not born in the offices of Microsoft's competitors; it came straight from the hearts of victimized meeting attendees. Microsoft estimates that at least 30 million PowerPoint presentations are made daily, with many rightfully warranting death verdict assessment. Death sentences often result from a "construction…

PKSolver: An add-in program for pharmacokinetic and pharmacodynamic data analysis in Microsoft Excel.

PubMed

Zhang, Yong; Huo, Meirong; Zhou, Jianping; Xie, Shaofei

2010-09-01

This study presents PKSolver, a freely available menu-driven add-in program for Microsoft Excel written in Visual Basic for Applications (VBA), for solving basic problems in pharmacokinetic (PK) and pharmacodynamic (PD) data analysis. The program provides a range of modules for PK and PD analysis including noncompartmental analysis (NCA), compartmental analysis (CA), and pharmacodynamic modeling. Two special built-in modules, multiple absorption sites (MAS) and enterohepatic circulation (EHC), were developed for fitting the double-peak concentration-time profile based on the classical one-compartment model. In addition, twenty frequently used pharmacokinetic functions were encoded as a macro and can be directly accessed in an Excel spreadsheet. To evaluate the program, a detailed comparison of modeling PK data using PKSolver and professional PK/PD software package WinNonlin and Scientist was performed. The results showed that the parameters estimated with PKSolver were satisfactory. In conclusion, the PKSolver simplified the PK and PD data analysis process and its output could be generated in Microsoft Word in the form of an integrated report. The program provides pharmacokinetic researchers with a fast and easy-to-use tool for routine and basic PK and PD data analysis with a more user-friendly interface. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

Improving the Plasticity of LIMS Implementation: LIMS Extension through Microsoft Excel

NASA Technical Reports Server (NTRS)

Culver, Mark

2017-01-01

A Laboratory Information Management System (LIMS) is a databasing software with many built-in tools ideal for handling and documenting most laboratory processes in an accurate and consistent manner, making it an indispensable tool for the modern laboratory. However, a lot of LIMS end users will find that in the performance of analyses that have unique considerations such as standard curves, multiple stages incubations, or logical considerations, a base LIMS distribution may not ideally suit their needs. These considerations bring about the need for extension languages, which can extend the functionality of a LIMS. While these languages do provide the implementation team the functionality required to accommodate these special laboratory analyses, they are usually too complex for the end user to modify to compensate for natural changes in laboratory operations. The LIMS utilized by our laboratory offers a unique and easy-to-use choice for an extension language, one that is already heavily relied upon not only in science but also in most academic and business pursuits: Microsoft Excel. The validity of Microsoft Excel as a pseudo programming language and its usability and versatility as a LIMS extension language will be discussed. The NELAC implications and overall drawbacks of this LIMS configuration will also be discussed.

IDEOM: an Excel interface for analysis of LC-MS-based metabolomics data.

PubMed

Creek, Darren J; Jankevics, Andris; Burgess, Karl E V; Breitling, Rainer; Barrett, Michael P

2012-04-01

The application of emerging metabolomics technologies to the comprehensive investigation of cellular biochemistry has been limited by bottlenecks in data processing, particularly noise filtering and metabolite identification. IDEOM provides a user-friendly data processing application that automates filtering and identification of metabolite peaks, paying particular attention to common sources of noise and false identifications generated by liquid chromatography-mass spectrometry (LC-MS) platforms. Building on advanced processing tools such as mzMatch and XCMS, it allows users to run a comprehensive pipeline for data analysis and visualization from a graphical user interface within Microsoft Excel, a familiar program for most biological scientists. IDEOM is provided free of charge at http://mzmatch.sourceforge.net/ideom.html, as a macro-enabled spreadsheet (.xlsb). Implementation requires Microsoft Excel (2007 or later). R is also required for full functionality. michael.barrett@glasgow.ac.uk Supplementary data are available at Bioinformatics online.

WASP (Write a Scientific Paper) using Excel - 10: Contingency tables.

PubMed

Grech, Victor

2018-06-01

Contingency tables may be required to perform chi-test analyses. This provides pointers as to how to do this in Microsoft Excel and explains how to set up methods to calculate confidence intervals for proportions, including proportions with zero numerators. Copyright © 2018 Elsevier B.V. All rights reserved.

WASP (Write a Scientific Paper) using Excel - 12: Odds ratio and relative risk.

PubMed

Grech, Victor

2018-07-01

The calculation of odds ratios and relative risks may be required as part of a data analysis exercise. This paper explains how to set up these calculations in Microsoft Excel from a two by two contingency table. Copyright © 2018 Elsevier B.V. All rights reserved.

Textbooks for Responsible Data Analysis in Excel

ERIC Educational Resources Information Center

Garrett, Nathan

2015-01-01

With 27 million users, Excel (Microsoft Corporation, Seattle, WA) is the most common business data analysis software. However, audits show that almost all complex spreadsheets have errors. The author examined textbooks to understand why responsible data analysis is taught. A purposeful sample of 10 textbooks was coded, and then compared against…

32 CFR 806b.32 - Submitting notices for publication in the Federal Register.

Code of Federal Regulations, 2010 CFR

2010-07-01

... managers must send a proposed notice, through the Major Command Privacy Office, to Air Force Chief Information Officer/P. Send notices electronically to [email protected] using Microsoft Word, using the... assessment was accomplished and is available should the Office of Management and Budget request it. ...

32 CFR 806b.32 - Submitting notices for publication in the Federal Register.

Code of Federal Regulations, 2012 CFR

2012-07-01

... managers must send a proposed notice, through the Major Command Privacy Office, to Air Force Chief Information Officer/P. Send notices electronically to [email protected] using Microsoft Word, using the...

32 CFR 806b.32 - Submitting notices for publication in the Federal Register.

Code of Federal Regulations, 2014 CFR

2014-07-01

... managers must send a proposed notice, through the Major Command Privacy Office, to Air Force Chief Information Officer/P. Send notices electronically to [email protected] using Microsoft Word, using the...

Automating the Presentation of Computer Networks

DTIC Science & Technology

2006-12-01

software to overlay operational state information. Other network management tools like Computer Associates Unicenter [6,7] generate internal network...and required manual placement assistance. A number of software libraries [20] offer a wealth of automatic layout algorithms and presentation...FX010857971033.aspx [2] Microsoft (2005) Visio 2003 Product Demo, http://www.microsoft.com/office/visio/prodinfo/demo.mspx [3] Smartdraw (2005) Network

Technical Support | Division of Cancer Prevention

Cancer.gov

To view the live webinar, you will need to have the software, Microsoft Live Meeting, downloaded onto your computer before the event. In most cases, the software will automatically download when you open the program on your system. However, in the event that you need to download it manually, you can access the software at the link below: Download the Microsoft Office Live

Development of the ECLSS Sizing Analysis Tool and ARS Mass Balance Model Using Microsoft Excel

NASA Technical Reports Server (NTRS)

McGlothlin, E. P.; Yeh, H. Y.; Lin, C. H.

1999-01-01

The development of a Microsoft Excel-compatible Environmental Control and Life Support System (ECLSS) sizing analysis "tool" for conceptual design of Mars human exploration missions makes it possible for a user to choose a certain technology in the corresponding subsystem. This tool estimates the mass, volume, and power requirements of every technology in a subsystem and the system as a whole. Furthermore, to verify that a design sized by the ECLSS Sizing Tool meets the mission requirements and integrates properly, mass balance models that solve for component throughputs of such ECLSS systems as the Water Recovery System (WRS) and Air Revitalization System (ARS) must be developed. The ARS Mass Balance Model will be discussed in this paper.

Estimation of pharmacokinetic parameters from non-compartmental variables using Microsoft Excel.

PubMed

Dansirikul, Chantaratsamon; Choi, Malcolm; Duffull, Stephen B

2005-06-01

This study was conducted to develop a method, termed 'back analysis (BA)', for converting non-compartmental variables to compartment model dependent pharmacokinetic parameters for both one- and two-compartment models. A Microsoft Excel spreadsheet was implemented with the use of Solver and visual basic functions. The performance of the BA method in estimating pharmacokinetic parameter values was evaluated by comparing the parameter values obtained to a standard modelling software program, NONMEM, using simulated data. The results show that the BA method was reasonably precise and provided low bias in estimating fixed and random effect parameters for both one- and two-compartment models. The pharmacokinetic parameters estimated from the BA method were similar to those of NONMEM estimation.

Monte Carlo simulation of parameter confidence intervals for non-linear regression analysis of biological data using Microsoft Excel.

PubMed

Lambert, Ronald J W; Mytilinaios, Ioannis; Maitland, Luke; Brown, Angus M

2012-08-01

This study describes a method to obtain parameter confidence intervals from the fitting of non-linear functions to experimental data, using the SOLVER and Analysis ToolPaK Add-In of the Microsoft Excel spreadsheet. Previously we have shown that Excel can fit complex multiple functions to biological data, obtaining values equivalent to those returned by more specialized statistical or mathematical software. However, a disadvantage of using the Excel method was the inability to return confidence intervals for the computed parameters or the correlations between them. Using a simple Monte-Carlo procedure within the Excel spreadsheet (without recourse to programming), SOLVER can provide parameter estimates (up to 200 at a time) for multiple 'virtual' data sets, from which the required confidence intervals and correlation coefficients can be obtained. The general utility of the method is exemplified by applying it to the analysis of the growth of Listeria monocytogenes, the growth inhibition of Pseudomonas aeruginosa by chlorhexidine and the further analysis of the electrophysiological data from the compound action potential of the rodent optic nerve. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

WASP (Write a Scientific Paper) using Excel - 11: Test characteristics.

PubMed

Grech, Victor

2018-07-01

The calculation of various test characteristics may be required as part of a data analysis exercise. This paper explains how to set up these calculations in Microsoft Excel in order to obtain sensitivity, specificity, positive and negative predictive values, diagnostic accuracy and prevalence. Copyright © 2018 Elsevier B.V. All rights reserved.

Using Information Technology in Teaching of Business Statistics in Nigeria Business School

ERIC Educational Resources Information Center

Hamadu, Dallah; Adeleke, Ismaila; Ehie, Ike

2011-01-01

This paper discusses the use of Microsoft Excel software in the teaching of statistics in the Faculty of Business Administration at the University of Lagos, Nigeria. Problems associated with existing traditional methods are identified and a novel pedagogy using Excel is proposed. The advantages of using this software over other specialized…

Building Higher-Order Markov Chain Models with EXCEL

ERIC Educational Resources Information Center

Ching, Wai-Ki; Fung, Eric S.; Ng, Michael K.

2004-01-01

Categorical data sequences occur in many applications such as forecasting, data mining and bioinformatics. In this note, we present higher-order Markov chain models for modelling categorical data sequences with an efficient algorithm for solving the model parameters. The algorithm can be implemented easily in a Microsoft EXCEL worksheet. We give a…

Equilibrator: Modeling Chemical Equilibria with Excel

ERIC Educational Resources Information Center

Vander Griend, Douglas A.

2011-01-01

Equilibrator is a Microsoft Excel program for learning about chemical equilibria through modeling, similar in function to EQS4WIN, which is no longer supported and does not work well with newer Windows operating systems. Similar to EQS4WIN, Equilibrator allows the user to define a system with temperature, initial moles, and then either total…

Illustrating Consumer Theory with the CES Utility Function

ERIC Educational Resources Information Center

Tohamy, Soumaya M.; Mixon, J. Wilson, Jr.

2004-01-01

The authors use Microsoft Excel to derive compensated and uncompensated demand curves. They use a constant elasticity of substitution (CES) utility function to show how changes in a good's price or income affect the quantities demanded of that good and of the other composite good, using Excel's Solver. They provide three contributions. First, they…

CProb: a computational tool for conducting conditional probability analysis.

PubMed

Hollister, Jeffrey W; Walker, Henry A; Paul, John F

2008-01-01

Conditional probability is the probability of observing one event given that another event has occurred. In an environmental context, conditional probability helps to assess the association between an environmental contaminant (i.e., the stressor) and the ecological condition of a resource (i.e., the response). These analyses, when combined with controlled experiments and other methodologies, show great promise in evaluating ecological conditions from observational data and in defining water quality and other environmental criteria. Current applications of conditional probability analysis (CPA) are largely done via scripts or cumbersome spreadsheet routines, which may prove daunting to end-users and do not provide access to the underlying scripts. Combining spreadsheets with scripts eases computation through a familiar interface (i.e., Microsoft Excel) and creates a transparent process through full accessibility to the scripts. With this in mind, we developed a software application, CProb, as an Add-in for Microsoft Excel with R, R(D)com Server, and Visual Basic for Applications. CProb calculates and plots scatterplots, empirical cumulative distribution functions, and conditional probability. In this short communication, we describe CPA, our motivation for developing a CPA tool, and our implementation of CPA as a Microsoft Excel Add-in. Further, we illustrate the use of our software with two examples: a water quality example and a landscape example. CProb is freely available for download at http://www.epa.gov/emap/nca/html/regions/cprob.

siMacro: A Fast and Easy Data Processing Tool for Cell-Based Genomewide siRNA Screens.

PubMed

Singh, Nitin Kumar; Seo, Bo Yeun; Vidyasagar, Mathukumalli; White, Michael A; Kim, Hyun Seok

2013-03-01

Growing numbers of studies employ cell line-based systematic short interfering RNA (siRNA) screens to study gene functions and to identify drug targets. As multiple sources of variations that are unique to siRNA screens exist, there is a growing demand for a computational tool that generates normalized values and standardized scores. However, only a few tools have been available so far with limited usability. Here, we present siMacro, a fast and easy-to-use Microsoft Office Excel-based tool with a graphic user interface, designed to process single-condition or two-condition synthetic screen datasets. siMacro normalizes position and batch effects, censors outlier samples, and calculates Z-scores and robust Z-scores, with a spreadsheet output of >120,000 samples in under 1 minute.

siMacro: A Fast and Easy Data Processing Tool for Cell-Based Genomewide siRNA Screens

PubMed Central

Singh, Nitin Kumar; Seo, Bo Yeun; Vidyasagar, Mathukumalli; White, Michael A.

2013-01-01

Growing numbers of studies employ cell line-based systematic short interfering RNA (siRNA) screens to study gene functions and to identify drug targets. As multiple sources of variations that are unique to siRNA screens exist, there is a growing demand for a computational tool that generates normalized values and standardized scores. However, only a few tools have been available so far with limited usability. Here, we present siMacro, a fast and easy-to-use Microsoft Office Excel-based tool with a graphic user interface, designed to process single-condition or two-condition synthetic screen datasets. siMacro normalizes position and batch effects, censors outlier samples, and calculates Z-scores and robust Z-scores, with a spreadsheet output of >120,000 samples in under 1 minute. PMID:23613684

75 FR 4560 - Notice of Public Hearing; Passenger Vessel Financial Responsibility

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-28

... should be addressed to the Office of the Secretary and submitted: By e-mail as an attachment (Microsoft.... Requests to appear at the hearing must be filed with the Office of the Secretary no later than 5 p.m. on...

Use of a Microsoft Excel based add-in program to calculate plasma sinistrin clearance by a two-compartment model analysis in dogs.

PubMed

Steinbach, Sarah M L; Sturgess, Christopher P; Dunning, Mark D; Neiger, Reto

2015-06-01

Assessment of renal function by means of plasma clearance of a suitable marker has become standard procedure for estimation of glomerular filtration rate (GFR). Sinistrin, a polyfructan solely cleared by the kidney, is often used for this purpose. Pharmacokinetic modeling using adequate software is necessary to calculate disappearance rate and half-life of sinistrin. The purpose of this study was to describe the use of a Microsoft excel based add-in program to calculate plasma sinistrin clearance, as well as additional pharmacokinetic parameters such as transfer rates (k), half-life (t1/2) and volume of distribution (Vss) for sinistrin in dogs with varying degrees of renal function. Copyright © 2015 Elsevier Ltd. All rights reserved.

Self-scheduling with Microsoft Excel.

PubMed

Irvin, S A; Brown, H N

1999-01-01

Excessive time was being spent by the emergency department (ED) staff, head nurse, and unit secretary on a complex 6-week manual self-scheduling system. This issue, plus inevitable errors and staff dissatisfaction, resulted in a manager-lead initiative to automate elements of the scheduling process using Microsoft Excel. The implementation of this initiative included: common coding of all 8-hour and 12-hour shifts, with each 4-hour period represented by a cell; the creation of a 6-week master schedule using the "count-if" function of Excel based on current staffing guidelines; staff time-off requests then entered by the department secretary; the head nurse, with staff input, then fine-tuned the schedule to provide even unit coverage. Outcomes of these changes included an increase in staff satisfaction, time saved by the head nurse, and staff work time saved because there was less arguing about the schedule. Ultimately, the automated self-scheduling method was expanded to the entire 700-bed hospital.

Individualized Human CAD Models: Anthropmetric Morphing and Body Tissue Layering

DTIC Science & Technology

2014-07-31

Part Flow Chart of the Interaction among VBA Macros, Excel® Spreadsheet, and SolidWorks Front View of the Male and Female Soldier CAD Model...yellow highlighting. The spreadsheet is linked to the CAD model by macros created with the Visual Basic for Application ( VBA ) editor in Microsoft Excel...basically three working parts to the anthropometric morphing that are all interconnected ( VBA macros, Excel spreadsheet, and SolidWorks). The flow

WASP (Write a Scientific Paper) using Excel - 8: t-Tests.

PubMed

Grech, Victor

2018-06-01

t-Testing is a common component of inferential statistics when comparing two means. This paper explains the central limit theorem and the concept of the null hypothesis as well as types of errors. On the practical side, this paper outlines how different t-tests may be performed in Microsoft Excel, for different purposes, both statically as well as dynamically, with Excel's functions. Copyright © 2018 Elsevier B.V. All rights reserved.

The Stag Hunt Game: An Example of an Excel-Based Probabilistic Game

ERIC Educational Resources Information Center

Bridge, Dave

2016-01-01

With so many role-playing simulations already in the political science education literature, the recent repeated calls for new games is both timely and appropriate. This article answers and extends those calls by advocating the creation of probabilistic games using Microsoft Excel. I introduce the example of the Stag Hunt Game--a short, effective,…

Microsoft Excel®: Is It an Important Job Skill for College Graduates?

ERIC Educational Resources Information Center

Formby, Sam K.; Medlin, B. Dawn; Ellington, Virginia

2017-01-01

Several studies have found that a large percentage of middle-skilled jobs require at least a basic understanding of spreadsheets, and some even advanced level skills. A study was conducted at a four-year university to identify Excel skill sets that were determined as necessary by employers of the university's current students, advisory boards,…

Energy Consumption Database

Science.gov Websites

Consumption Database The California Energy Commission has created this on-line database for informal reporting ) classifications. The database also provides easy downloading of energy consumption data into Microsoft Excel (XLSX

An Excel macro for generating trilinear plots.

PubMed

Shikaze, Steven G; Crowe, Allan S

2007-01-01

This computer note describes a method for creating trilinear plots in Microsoft Excel. Macros have been created in MS Excel's internal language: Visual Basic for Applications (VBA). A simple form has been set up to allow the user to input data from an Excel worksheet. The VBA macro is used to convert the triangular data (which consist of three columns of percentage data) into X-Y data. The macro then generates the axes, labels, and grid for the trilinear plot. The X-Y data are plotted as scatter data in Excel. By providing this macro in Excel, users can create trilinear plots in a quick, inexpensive manner.

Comparison of using different bridge prosthetic designs for partial defect restoration through mathematical modeling.

PubMed

Styranivska, Oksana; Kliuchkovska, Nataliia; Mykyyevych, Nataliya

2017-01-01

To analyze the stress-strain states of bone and abutment teeth during the use of different prosthetic designs of fixed partial dentures with the use of relevant mathematical modeling principles. The use of Comsol Multiphysics 3.5 (Comsol AB, Sweden) software during the mathematical modeling of stress-strain states provided numerical data for analytical interpretation in three different clinical scenarios with fixed dentures and different abutment teeth and demountable prosthetic denture with the saddle-shaped intermediate part. Microsoft Excel Software (Microsoft Office 2017) helped to evaluate absolute mistakes of stress and strain parameters of each abutment tooth during three modeled scenarios and normal condition and to summarize data into the forms of tables. In comparison with the fixed prosthetic denture supported by the canine, first premolar, and third molar, stresses at the same abutment teeth with the use of demountable denture with the saddle-shaped intermediate part decreased: at the mesial abutment tooth by 2.8 times, at distal crown by 6.1 times, and at the intermediate part by 11.1 times, respectively, the deformation level decreased by 3.1, 1.9, and 1.4 times at each area. The methods of mathematical modeling proved that complications during the use of fixed partial dentures based on the overload effect of the abutment teeth and caused by the deformation process inside the intermediate section of prosthetic construction.

78 FR 24237 - Advisory Committee on Construction Safety and Health (ACCSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... your materials to the OSHA Docket Office, Docket No. OSHA-2013-0006, Room N-2625, U.S. Department of... presentations and other electronic materials must be compatible with PowerPoint 2010 and other Microsoft Office... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0006...

78 FR 30337 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

...: You may submit materials to the OSHA Docket Office, Docket No. OSHA-2013-0013, Room N-2625, U.S... other electronic materials must be compatible with Microsoft Office 2010 formats. The FACOSH chair may... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0013...

Competences in demand within the Spanish agricultural engineering sector

NASA Astrophysics Data System (ADS)

Perdigones, Alicia; Valera, Diego Luis; Moreda, Guillermo Pedro; García, Jose Luis

2014-09-01

The Rural Engineering Department (Technical University of Madrid) ran three competence surveys during the 2006-2007 and 2007-2008 academic years and evaluated: (1) the competences gained by agricultural engineer's degree and agricultural technical engineer's degree students (360 respondents); (2) the competences demanded by agricultural employers (50 farming sector employers); (3) competences required by farming sector professionals and former students (70 professionals). The surveys show significant differences between what competences agricultural employers require of graduates and the competences they acquire during their agricultural engineering degree courses. Recruiters are looking for generic competences such as the ability to coordinate groups and place less importance on knowledge of engineering, biology, applied economics and legislation. Of the computer-related competences, those most in demand by sector professionals were related to the use of Microsoft Office/Excel (used by 79% of professionals). Surveys were used to redesign some subjects of the degrees.

Mathematical modeling of the burden distribution in the blast furnace shaft

NASA Astrophysics Data System (ADS)

Park, Jong-In; Jung, Hun-Je; Jo, Min-Kyu; Oh, Han-Sang; Han, Jeong-Whan

2011-06-01

Process efficiency in the blast furnace is influenced by the gas flow pattern, which is dictated by the burden profile. Therefore, it is important to control the burden distribution so as to achieve reasonable gas flow in the blast furnace operation. Additionally, the charging pattern selection is important as it affects the burden trajectory and stock profile. For analysis of the burden distribution, a new analysis model was developed by use of the spreadsheet program, Microsoft® Office Excel, based on visual basic. This model is composed of the falling burden trajectory and a stock model. The burden trajectory is determined by the burden type, batch weight, rotating velocity of the chute, tilting angle, and friction coefficient. After falling, stock lines are formed by the angle of repose, which is affected by the burden trajectory and the falling velocity. The mathematical formulas for developing this model were modified by a scaled model experiment and DEM simulation.

Marketing your dental practice using microsoft powerpoint.

PubMed

Kotlow, L A

2001-12-01

Educating the parents of my patients about the techniques and specialized care pediatric dentists provide has always been a challenge. When I began my dental practice in 1974, the materials and audiovisual programs that were available for parental and patient education were of poor quality and often did not reflect my office philosophy. The multimedia material for pediatric dentistry was limited in scope and of little value in conveying to the parents and patients pediatric restorative procedures, causes of dental disease, caries prevention and patient management. Effective communication to the public can be divided into two areas: in-office marketing; and outside advertising. The primary focus of this discussion will be on in-house marketing of your dental practice using Microsoft PowerPoint.

User's Manual: Routines for Radiative Heat Transfer and Thermometry

NASA Technical Reports Server (NTRS)

Risch, Timothy K.

2016-01-01

Determining the intensity and spectral distribution of radiation emanating from a heated surface has applications in many areas of science and engineering. Areas of research in which the quantification of spectral radiation is used routinely include thermal radiation heat transfer, infrared signature analysis, and radiation thermometry. In the analysis of radiation, it is helpful to be able to predict the radiative intensity and the spectral distribution of the emitted energy. Presented in this report is a set of routines written in Microsoft Visual Basic for Applications (VBA) (Microsoft Corporation, Redmond, Washington) and incorporating functions specific to Microsoft Excel (Microsoft Corporation, Redmond, Washington) that are useful for predicting the radiative behavior of heated surfaces. These routines include functions for calculating quantities of primary importance to engineers and scientists. In addition, the routines also provide the capability to use such information to determine surface temperatures from spectral intensities and for calculating the sensitivity of the surface temperature measurements to unknowns in the input parameters.

Guidelines for Graphing Data with Microsoft[R] Office 2007[TM], Office 2010[TM], and Office for Mac[TM] 2008 and 2011

ERIC Educational Resources Information Center

Barton, Erin E.; Reichow, Brian

2012-01-01

The interpretation of single-case data requires systematic visual analysis across and within conditions. Graphs are a vital component for analyzing and communicating single-case design data and a necessary tool for applied researchers and practitioners. Several articles have been published with task analyses for graphing data with the new versions…

Use of Bibliographic Systems and Concept Maps: Innovative Tools to Complete a Literature Review

ERIC Educational Resources Information Center

Martelo, Maira L.

2011-01-01

This article presents a process for utilizing a bibliographic system built with Microsoft Excel as well as concept maps to organize and to synthesize information that can be included in a literature review. A review of the conceptual framework behind these tools is included as well as a detailed description about how to build the system in Excel.…

78 FR 30937 - National Advisory Committee on Occupational Safety and Health (NACOSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-23

... OSHA Docket Office, Docket No. OSHA-2013-0015, Room N-2625, U.S. Department of Labor, 200 Constitution... materials must be compatible with PowerPoint 2010 and other Microsoft Office 2010 formats. The NACOSH Chair... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0015...

78 FR 32690 - Certain Gaming and Entertainment Consoles, Related Software, and Components Thereof; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-31

..., Washington (``Microsoft'') as the sole respondent. The notice of investigation also named the Office of... determination (``RID'') issued by the presiding administrative law judge (``ALJ'') on March 22, 2013. The... remaining patent as modified by the RID. FOR FURTHER INFORMATION CONTACT: Panyin A. Hughes, Office of the...

It's a Holiday!!

ERIC Educational Resources Information Center

Ratliff, Michael I.; Mc Shane, Janet M.

2008-01-01

This article studies various holiday distributions, the most interesting one being Easter. Gauss' Easter algorithm and Microsoft Excel are used to determine that the Easter distribution can be closely approximated by the convolution of two well-known uniform distributions. (Contains 8 figures.)

CADDIS Volume 4. Data Analysis: Download Software

EPA Pesticide Factsheets

Overview of the data analysis tools available for download on CADDIS. Provides instructions for downloading and installing CADStat, access to Microsoft Excel macro for computing SSDs, a brief overview of command line use of R, a statistical software.

Excel VBA for Physicists; A Primer

NASA Astrophysics Data System (ADS)

Liengme, Bernard V.

2016-11-01

This book is both an introduction and a demonstration of how Visual Basic for Applications (VBA) can greatly enhance Microsoft Excel® by giving users the ability to create their own functions within a worksheet and to create subroutines to perform repetitive actions. The book is written so readers are encouraged to experiment with VBA programming with examples using fairly simple physics or non-complicated mathematics such as root finding and numerical integration. Tested Excel® workbooks are available for each chapter and there is nothing to buy or install. A tested Excel workbook for each chapter can be downloaded from Book information

Automating Phase Change Lines and Their Labels Using Microsoft Excel(R).

PubMed

Deochand, Neil

2017-09-01

Many researchers have rallied against drawn in graphical elements and offered ways to avoid them, especially regarding the insertion of phase change lines (Deochand, Costello, & Fuqua, 2015; Dubuque, 2015; Vanselow & Bourret, 2012). However, few have offered a solution to automating the phase labels, which are often utilized in behavior analytic graphical displays (Deochand et al., 2015). Despite the fact that Microsoft Excel® is extensively utilized by behavior analysts, solutions to resolve issues in our graphing practices are not always apparent or user-friendly. Considering the insertion of phase change lines and their labels constitute a repetitious and laborious endeavor, any minimization in the steps to accomplish these graphical elements could offer substantial time-savings to the field. The purpose of this report is to provide an updated way (and templates in the supplemental materials) to add phase change lines with their respective labels, which stay embedded to the graph when they are moved or updated.

Equilibrium expert: an add-in to Microsoft Excel for multiple binding equilibrium simulations and parameter estimations.

PubMed

Raguin, Olivier; Gruaz-Guyon, Anne; Barbet, Jacques

2002-11-01

An add-in to Microsoft Excel was developed to simulate multiple binding equilibriums. A partition function, readily written even when the equilibrium is complex, describes the experimental system. It involves the concentrations of the different free molecular species and of the different complexes present in the experiment. As a result, the software is not restricted to a series of predefined experimental setups but can handle a large variety of problems involving up to nine independent molecular species. Binding parameters are estimated by nonlinear least-square fitting of experimental measurements as supplied by the user. The fitting process allows user-defined weighting of the experimental data. The flexibility of the software and the way it may be used to describe common experimental situations and to deal with usual problems such as tracer reactivity or nonspecific binding is demonstrated by a few examples. The software is available free of charge upon request.

Performance (Off-Design) Cycle Analysis for a Turbofan Engine With Interstage Turbine Burner

NASA Technical Reports Server (NTRS)

Liew, K. H.; Urip, E.; Yang, S. L.; Mattingly, J. D.; Marek, C. J.

2005-01-01

This report presents the performance of a steady-state, dual-spool, separate-exhaust turbofan engine, with an interstage turbine burner (ITB) serving as a secondary combustor. The ITB, which is located in the transition duct between the high- and the low-pressure turbines, is a relatively new concept for increasing specific thrust and lowering pollutant emissions in modern jet-engine propulsion. A detailed off-design performance analysis of ITB engines is written in Microsoft(Registered Trademark) Excel (Redmond, Washington) macrocode with Visual Basic Application to calculate engine performances over the entire operating envelope. Several design-point engine cases are pre-selected using a parametric cycle-analysis code developed previously in Microsoft(Registered Trademark) Excel, for off-design analysis. The off-design code calculates engine performances (i.e. thrust and thrust-specific-fuel-consumption) at various flight conditions and throttle settings.

CO2calc: A User-Friendly Seawater Carbon Calculator for Windows, Mac OS X, and iOS (iPhone)

USGS Publications Warehouse

Robbins, L.L.; Hansen, M.E.; Kleypas, J.A.; Meylan, S.C.

2010-01-01

A user-friendly, stand-alone application for the calculation of carbonate system parameters was developed by the U.S. Geological Survey Florida Shelf Ecosystems Response to Climate Change Project in response to its Ocean Acidification Task. The application, by Mark Hansen and Lisa Robbins, USGS St. Petersburg, FL, Joanie Kleypas, NCAR, Boulder, CO, and Stephan Meylan, Jacobs Technology, St. Petersburg, FL, is intended as a follow-on to CO2SYS, originally developed by Lewis and Wallace (1998) and later modified for Microsoft Excel? by Denis Pierrot (Pierrot and others, 2006). Besides eliminating the need for using Microsoft Excel on the host system, CO2calc offers several improvements on CO2SYS, including: An improved graphical user interface for data entry and results Additional calculations of air-sea CO2 fluxes (for surface water calculations) The ability to tag data with sample name, comments, date, time, and latitude/longitude The ability to use the system time and date and latitude/ longitude (automatic retrieval of latitude and longitude available on iPhone? 3, 3GS, 4, and Windows? hosts with an attached National Marine Electronics Association (NMEA)-enabled GPS) The ability to process multiple files in a batch processing mode An option to save sample information, data input, and calculated results as a comma-separated value (CSV) file for use with Microsoft Excel, ArcGIS,? or other applications An option to export points with geographic coordinates as a KMZ file for viewing and editing in Google EarthTM

Statistical Power Analysis with Microsoft Excel: Normal Tests for One or Two Means as a Prelude to Using Non-Central Distributions to Calculate Power

ERIC Educational Resources Information Center

Texeira, Antonio; Rosa, Alvaro; Calapez, Teresa

2009-01-01

This article presents statistical power analysis (SPA) based on the normal distribution using Excel, adopting textbook and SPA approaches. The objective is to present the latter in a comparative way within a framework that is familiar to textbook level readers, as a first step to understand SPA with other distributions. The analysis focuses on the…

Quantitative thermodynamic predication of interactions between nucleic acid and non-nucleic acid species using Microsoft excel.

PubMed

Zou, Jiaqi; Li, Na

2013-09-01

Proper design of nucleic acid sequences is crucial for many applications. We have previously established a thermodynamics-based quantitative model to help design aptamer-based nucleic acid probes by predicting equilibrium concentrations of all interacting species. To facilitate customization of this thermodynamic model for different applications, here we present a generic and easy-to-use platform to implement the algorithm of the model with Microsoft(®) Excel formulas and VBA (Visual Basic for Applications) macros. Two Excel spreadsheets have been developed: one for the applications involving only nucleic acid species, the other for the applications involving both nucleic acid and non-nucleic acid species. The spreadsheets take the nucleic acid sequences and the initial concentrations of all species as input, guide the user to retrieve the necessary thermodynamic constants, and finally calculate equilibrium concentrations for all species in various bound and unbound conformations. The validity of both spreadsheets has been verified by comparing the modeling results with the experimental results on nucleic acid sequences reported in the literature. This Excel-based platform described here will allow biomedical researchers to rationalize the sequence design of nucleic acid probes using the thermodynamics-based modeling even without relevant theoretical and computational skills. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

The Humble Pie--Half-Baked or Well Done?

ERIC Educational Resources Information Center

Hunt, Neville; Mashhoudy, Houshang

2008-01-01

This article re-examines the much maligned piechart and provides justification for its use. It identifies common pitfalls when drawing piecharts in Microsoft Excel and offers advice on how to avoid them. (Contains 6 figures and 5 tables.)

77 FR 73969 - International Fisheries; Pacific Tuna Fisheries; Fishing Restrictions in the Eastern Pacific Ocean

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-12

... comments will only be accepted in Microsoft Word or Excel, WordPerfect, or Adobe PDF file formats. Written... membership includes: Belize, Canada, China, Chinese Taipei (Taiwan), Colombia, Costa Rica, Ecuador, El...

VISION User Guide - VISION (Verifiable Fuel Cycle Simulation) Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacob J. Jacobson; Robert F. Jeffers; Gretchen E. Matthern

2009-08-01

The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R&D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating “what if” scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level for U.S. nuclear power. The model is not intendedmore » as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., “reactor types” not individual reactors and “separation types” not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation of disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. Note that recovered uranium is itself often partitioned: some RU flows with recycled transuranic elements, some flows with wastes, and the rest is designated RU. RU comes out of storage if needed to correct the U/TRU ratio in new recycled fuel. Neither RU nor DU are designated as wastes. VISION is comprised of several Microsoft Excel input files, a Powersim Studio core, and several Microsoft Excel output files. All must be co-located in the same folder on a PC to function. We use Microsoft Excel 2003 and have not tested VISION with Microsoft Excel 2007. The VISION team uses both Powersim Studio 2005 and 2009 and it should work with either.« less

Nutritional supplement products: Does the label information influence purchasing decisions for the physically active?

PubMed

Gabriels, Gary; Lambert, Mike

2013-10-02

The increase in sales of nutritional supplement globally can be attributed, in part, to aggressive marketing by manufacturers, rather than because the nutritional supplements have become more effective. Furthermore, the accuracy of the labelling often goes unchallenged. Therefore, any effects of the supplement, may be due to contaminants or adulterants in these products not reflected on the label. A self-administered questionnaire was used to determine how consumers of nutritional supplements acquired information to assist their decision-making processes, when purchasing a product. The study was approved by the University of Cape Town, Faculty of Health Sciences Human Research Ethics Committee. The questionnaire consisted of seven, closed and open-ended questions. The participants were asked to respond to the questions according to a defined list of statements. A total of 259 participants completed and returned questionnaires. The data and processing of the returned questionnaires was captured using Windows-based Microsoft® Office Excel 2003 SP 1 (Excel © 1985-2003 Microsoft Corporation). Statistica Version 10 (copyright © Stat Soft, Inc. 1984-2011) was used to calculate the descriptive statistics. The main finding of the study was that nearly 70% of the respondents who purchased supplements were strongly influenced by container label information that stipulated that the nutritional supplement product is free of banned substances. The second finding was that just over 50% of the respondents attached importance to the quality of the nutritional supplement product information on the container label. The third finding was that about 40% of the respondents were strongly influenced by the ingredients on the labels when they purchased nutritional supplements. This study, (i) identifies short-comings in current labelling information practices, (ii) provides opportunities to improve label and non-label information and communication, and, (iii) presents the case for quality assurance laboratory "screening testing" of declared and undeclared contaminants and/or adulterants, that could have negative consequences to the consumer.

Nutritional supplement products: does the label information influence purchasing decisions for the physically active?

PubMed Central

2013-01-01

Background The increase in sales of nutritional supplement globally can be attributed, in part, to aggressive marketing by manufacturers, rather than because the nutritional supplements have become more effective. Furthermore, the accuracy of the labelling often goes unchallenged. Therefore, any effects of the supplement, may be due to contaminants or adulterants in these products not reflected on the label. Methods A self-administered questionnaire was used to determine how consumers of nutritional supplements acquired information to assist their decision-making processes, when purchasing a product. The study was approved by the University of Cape Town, Faculty of Health Sciences Human Research Ethics Committee. The questionnaire consisted of seven, closed and open-ended questions. The participants were asked to respond to the questions according to a defined list of statements. A total of 259 participants completed and returned questionnaires. The data and processing of the returned questionnaires was captured using Windows-based Microsoft® Office Excel 2003 SP 1 (Excel © 1985–2003 Microsoft Corporation). Statistica Version 10 (copyright © Stat Soft, Inc. 1984–2011) was used to calculate the descriptive statistics. Results The main finding of the study was that nearly 70% of the respondents who purchased supplements were strongly influenced by container label information that stipulated that the nutritional supplement product is free of banned substances. The second finding was that just over 50% of the respondents attached importance to the quality of the nutritional supplement product information on the container label. The third finding was that about 40% of the respondents were strongly influenced by the ingredients on the labels when they purchased nutritional supplements. Conclusion This study, (i) identifies short-comings in current labelling information practices, (ii) provides opportunities to improve label and non-label information and communication, and, (iii) presents the case for quality assurance laboratory “screening testing” of declared and undeclared contaminants and/or adulterants, that could have negative consequences to the consumer. PMID:24088193

WASP (Write a Scientific Paper) using Excel - 7: The t-distribution.

PubMed

Grech, Victor

2018-03-01

The calculation of descriptive statistics after data collection provides researchers with an overview of the shape and nature of their datasets, along with basic descriptors, and may help identify true or incorrect outlier values. This exercise should always precede inferential statistics, when possible. This paper provides some pointers for doing so in Microsoft Excel, both statically and dynamically, with Excel's functions, including the calculation of standard deviation and variance and the relevance of the t-distribution. Copyright © 2018 Elsevier B.V. All rights reserved.

Spreadsheet macros for coloring sequence alignments.

PubMed

Haygood, M G

1993-12-01

This article describes a set of Microsoft Excel macros designed to color amino acid and nucleotide sequence alignments for review and preparation of visual aids. The colored alignments can then be modified to emphasize features of interest. Procedures for importing and coloring sequences are described. The macro file adds a new menu to the menu bar containing sequence-related commands to enable users unfamiliar with Excel to use the macros more readily. The macros were designed for use with Macintosh computers but will also run with the DOS version of Excel.

75 FR 26906 - NVOCC Negotiated Rate Arrangements; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-13

... must be filed with the Office of the Secretary no later than 5 p.m. on May 14, 2010, and include the... vessel-operating common carriers. Requests to appear should be addressed to the Office of the Secretary and submitted: By e-mail as an attachment (Microsoft Word) sent to [email protected] ; by facsimile to...

An Introduction to Simulated Annealing

ERIC Educational Resources Information Center

Albright, Brian

2007-01-01

An attempt to model the physical process of annealing lead to the development of a type of combinatorial optimization algorithm that takes on the problem of getting trapped in a local minimum. The author presents a Microsoft Excel spreadsheet that illustrates how this works.

Prevalence of early loss of primary teeth in 5-10-year-old school children in Chidambaram town.

PubMed

Ahamed, S Syed Shaheed; Reddy, Venugopal N; Krishnakumar, R; Mohan, Muthu G; Sugumaran, Durai K; Rao, Arun P

2012-01-01

The premature loss of primary teeth may reduce arch length required for the succeeding tooth and, hence, predisposes crowding, rotation and impaction of the permanent teeth. There are only limited studies carried out about the prevalence of early loss of primary teeth. The present study was performed to evaluate the prevalence of early loss of primary teeth in school children in Chidambaram town in Tamilnadu, India. A total of 1121 school children (561 boys and 560 girls) between 5 and 10 years of age were selected for the study. An experienced examiner performed all clinical examinations under natural light. Data including age and missing tooth was collected. Microsoft Excel/2000 (Microsoft Office XP) data spreadsheet was used and later exported to the Statistical Package for Social Science (SPSS) for Windows (version 10.0). Descriptive statistics was applied and, from the results, chi-square tests were applied at a level of significance of 5% (P < 0.05). The results showed that 16.5% of the sample had early loss of primary teeth, but no differences were observed between genders (P > 0.05). The greatest prevalence was found among the 8-year olds (5.08%), and the most commonly missing teeth were the right lower primary first molars (16.82%). It can be concluded that the prevalence of early loss was high and that the lower primary molars were the most commonly missing teeth in the present study.

Dimeric spectra analysis in Microsoft Excel: a comparative study.

PubMed

Gilani, A Ghanadzadeh; Moghadam, M; Zakerhamidi, M S

2011-11-01

The purpose of this work is to introduce the reader to an Add-in implementation, Decom. This implementation provides the whole processing requirements for analysis of dimeric spectra. General linear and nonlinear decomposition algorithms were integrated as an Excel Add-in for easy installation and usage. In this work, the results of several samples investigations were compared to those obtained by Datan. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Matlab-Excel Interface for OpenDSS

DOE Office of Scientific and Technical Information (OSTI.GOV)

The software allows users of the OpenDSS grid modeling software to access their load flow models using a GUI interface developed in MATLAB. The circuit definitions are entered into a Microsoft Excel spreadsheet which makes circuit creation and editing a much simpler process than the basic text-based editors used in the native OpenDSS interface. Plot tools have been developed which can be accessed through a MATLAB GUI once the desired parameters have been simulated.

Technology Tips

ERIC Educational Resources Information Center

Hollebrands, Karen Flanagan

2004-01-01

Directions for using a function called Mail Merge in Microsoft Office are mentioned. Using a spreadsheet and mail merge, allows one to create different assessments, complete with worked solutions, generate them on demand or save them for later use.

BIOCHLOR: NATURAL ATTENUATION DECISION SUPPORT SYSTEM, USER'S MANUAL, VERSION 1.0

EPA Science Inventory

BIOCHLOR is an easy-to-use screening model that simulates remediation by natural attenuation (RNA) of dissolved solvents at chlorinated solvent release sites. The software, programmed in the Microsoft Excel spreadsheet environment and based on the Domenico analytical solute tran...

Amerciamysis bahia Stochastic Matrix Population Model for Laboratory Populations

EPA Science Inventory

The population model described here is a stochastic, density-independent matrix model for integrating the effects of toxicants on survival and reproduction of the marine invertebrate, Americamysis bahia. The model was constructed using Microsoft® Excel 2003. The focus of the mode...

76 FR 39792 - Fisheries of the Exclusive Economic Zone Off Alaska; Northern Rockfish in the Bering Sea and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

.... NMFS will accept anonymous comments. Enter ``N/A'' in the required fields, if you wish to remain anonymous. Attachments to electronic comments will be accepted in Microsoft Word, Excel, WordPerfect, or...

A Public + Private Mashup for Computer Science Education

ERIC Educational Resources Information Center

Wang, Kevin

2013-01-01

Getting called into the boss's office isn't always fun. Memories of trips to the school principal's office flash through one's mind. But the day last year that the author was called in to meet with their division vice president turned out to be a very good day. Executives at his company, Microsoft, had noticed the program he created in his spare…

VOLATILECALC: A silicate melt-H2O-CO2 solution model written in Visual Basic for excel

USGS Publications Warehouse

Newman, S.; Lowenstern, J. B.

2002-01-01

We present solution models for the rhyolite-H2O-CO2 and basalt-H2O-CO2 systems at magmatic temperatures and pressures below ~ 5000 bar. The models are coded as macros written in Visual Basic for Applications, for use within MicrosoftR Excel (Office'98 and 2000). The series of macros, entitled VOLATILECALC, can calculate the following: (1) Saturation pressures for silicate melt of known dissolved H2O and CO2 concentrations and the corresponding equilibrium vapor composition; (2) open- and closed-system degassing paths (melt and vapor composition) for depressurizing rhyolitic and basaltic melts; (3) isobaric solubility curves for rhyolitic and basaltic melts; (4) isoplethic solubility curves (constant vapor composition) for rhyolitic and basaltic melts; (5) polybaric solubility curves for the two end members and (6) end member fugacities of H2O and CO2 vapors at magmatic temperatures. The basalt-H2O-CO2 macros in VOLATILECALC are capable of calculating melt-vapor solubility over a range of silicate-melt compositions by using the relationships provided by Dixon (American Mineralogist 82 (1997) 368). The output agrees well with the published solution models and experimental data for silicate melt-vapor systems for pressures below 5000 bar. ?? 2002 Elsevier Science Ltd. All rights reserved.

Enzyme inhibition studies by integrated Michaelis-Menten equation considering simultaneous presence of two inhibitors when one of them is a reaction product.

PubMed

Bezerra, Rui M F; Pinto, Paula A; Fraga, Irene; Dias, Albino A

2016-03-01

To determine initial velocities of enzyme catalyzed reactions without theoretical errors it is necessary to consider the use of the integrated Michaelis-Menten equation. When the reaction product is an inhibitor, this approach is particularly important. Nevertheless, kinetic studies usually involved the evaluation of other inhibitors beyond the reaction product. The occurrence of these situations emphasizes the importance of extending the integrated Michaelis-Menten equation, assuming the simultaneous presence of more than one inhibitor because reaction product is always present. This methodology is illustrated with the reaction catalyzed by alkaline phosphatase inhibited by phosphate (reaction product, inhibitor 1) and urea (inhibitor 2). The approach is explained in a step by step manner using an Excel spreadsheet (available as a template in Appendix). Curve fitting by nonlinear regression was performed with the Solver add-in (Microsoft Office Excel). Discrimination of the kinetic models was carried out based on Akaike information criterion. This work presents a methodology that can be used to develop an automated process, to discriminate in real time the inhibition type and kinetic constants as data (product vs. time) are achieved by the spectrophotometer. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

V OLATILEC ALC: a silicate melt-H 2O-CO 2 solution model written in Visual Basic for excel

NASA Astrophysics Data System (ADS)

Newman, Sally; Lowenstern, Jacob B.

2002-06-01

We present solution models for the rhyolite-H 2O-CO 2 and basalt-H 2O-CO 2 systems at magmatic temperatures and pressures below ˜5000 bar. The models are coded as macros written in Visual Basic for Applications, for use within Microsoft ® Excel (Office'98 and 2000). The series of macros, entitled V OLATILEC ALC, can calculate the following: (1) Saturation pressures for silicate melt of known dissolved H 2O and CO 2 concentrations and the corresponding equilibrium vapor composition; (2) open- and closed-system degassing paths (melt and vapor composition) for depressurizing rhyolitic and basaltic melts; (3) isobaric solubility curves for rhyolitic and basaltic melts; (4) isoplethic solubility curves (constant vapor composition) for rhyolitic and basaltic melts; (5) polybaric solubility curves for the two end members and (6) end member fugacities of H 2O and CO 2 vapors at magmatic temperatures. The basalt-H 2O-CO 2 macros in V OLATILEC ALC are capable of calculating melt-vapor solubility over a range of silicate-melt compositions by using the relationships provided by Dixon (American Mineralogist 82 (1997) 368). The output agrees well with the published solution models and experimental data for silicate melt-vapor systems for pressures below 5000 bar.

The efficacy of the Microsoft KinectTM to assess human bimanual coordination.

PubMed

Liddy, Joshua J; Zelaznik, Howard N; Huber, Jessica E; Rietdyk, Shirley; Claxton, Laura J; Samuel, Arjmand; Haddad, Jeffrey M

2017-06-01

The Microsoft Kinect has been used in studies examining posture and gait. Despite the advantages of portability and low cost, this device has not been used to assess interlimb coordination. Fundamental insights into movement control, variability, health, and functional status can be gained by examining coordination patterns. In this study, we investigated the efficacy of the Microsoft Kinect to capture bimanual coordination relative to a research-grade motion capture system. Twenty-four healthy adults performed coordinated hand movements in two patterns (in-phase and antiphase) at eight movement frequencies (1.00-3.33 Hz). Continuous relative phase (CRP) and discrete relative phase (DRP) were used to quantify the means (mCRP and mDRP) and variability (sdCRP and sdDRP) of coordination patterns. Between-device agreement was assessed using Bland-Altman bias with 95 % limits of agreement, concordance correlation coefficients (absolute agreement), and Pearson correlation coefficients (relative agreement). Modest-to-excellent relative and absolute agreements were found for mCRP in all conditions. However, mDRP showed poor agreement for the in-phase pattern at low frequencies, due to large between-device differences in a subset of participants. By contrast, poor absolute agreement was observed for both sdCRP and sdDRP, while relative agreement ranged from poor to excellent. Overall, the Kinect captures the macroscopic patterns of bimanual coordination better than coordination variability.

Macros for Educational Research.

ERIC Educational Resources Information Center

Woodrow, Janice E. J.

1988-01-01

Describes the design and operation of two macros written in the programming language of Microsoft's EXCEL for educational research applications. The first macro determines the frequency of responses to a Likert-type questionnaire or multiple-choice test; the second performs a one-way analysis of variance test. (Author/LRW)

LANDFILL GAS EMISSIONS MODEL (LANDGEM) VERSION 3.02 USER'S GUIDE

EPA Science Inventory

The Landfill Gas Emissions Model (LandGEM) is an automated estimation tool with a Microsoft Excel interface that can be used to estimate emission rates for total landfill gas, methane, carbon dioxide, nonmethane organic compounds, and individual air pollutants from municipal soli...

Analyzing Subsidies in Microsoft Excel

ERIC Educational Resources Information Center

Mixon, J. Wilson, Jr.

2005-01-01

Applying the budget line/indifference curve apparatus to policy issues reveals important and sometimes counterintuitive policy implications. Also, it provides practice in using the apparatus. The author applies these tools to subsidies. The analysis follows textbook treatments but is extended at some points. In particular, the present analysis…

A step-by-step guide to non-linear regression analysis of experimental data using a Microsoft Excel spreadsheet.

PubMed

Brown, A M

2001-06-01

The objective of this present study was to introduce a simple, easily understood method for carrying out non-linear regression analysis based on user input functions. While it is relatively straightforward to fit data with simple functions such as linear or logarithmic functions, fitting data with more complicated non-linear functions is more difficult. Commercial specialist programmes are available that will carry out this analysis, but these programmes are expensive and are not intuitive to learn. An alternative method described here is to use the SOLVER function of the ubiquitous spreadsheet programme Microsoft Excel, which employs an iterative least squares fitting routine to produce the optimal goodness of fit between data and function. The intent of this paper is to lead the reader through an easily understood step-by-step guide to implementing this method, which can be applied to any function in the form y=f(x), and is well suited to fast, reliable analysis of data in all fields of biology.

A non-linear regression analysis program for describing electrophysiological data with multiple functions using Microsoft Excel.

PubMed

Brown, Angus M

2006-04-01

The objective of this present study was to demonstrate a method for fitting complex electrophysiological data with multiple functions using the SOLVER add-in of the ubiquitous spreadsheet Microsoft Excel. SOLVER minimizes the difference between the sum of the squares of the data to be fit and the function(s) describing the data using an iterative generalized reduced gradient method. While it is a straightforward procedure to fit data with linear functions, and we have previously demonstrated a method of non-linear regression analysis of experimental data based upon a single function, it is more complex to fit data with multiple functions, usually requiring specialized expensive computer software. In this paper we describe an easily understood program for fitting experimentally acquired data, in this case the stimulus-evoked compound action potential from the mouse optic nerve, with multiple Gaussian functions. The program is flexible and can be applied to describe data with a wide variety of user-input functions.

Advanced Small Modular Reactor Economics Model Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, Thomas J.

2014-10-01

The US Department of Energy Office of Nuclear Energy’s Advanced Small Modular Reactor (SMR) research and development activities focus on four key areas: Developing assessment methods for evaluating advanced SMR technologies and characteristics; and Developing and testing of materials, fuels and fabrication techniques; and Resolving key regulatory issues identified by US Nuclear Regulatory Commission and industry; and Developing advanced instrumentation and controls and human-machine interfaces. This report focuses on development of assessment methods to evaluate advanced SMR technologies and characteristics. Specifically, this report describes the expansion and application of the economic modeling effort at Oak Ridge National Laboratory. Analysis ofmore » the current modeling methods shows that one of the primary concerns for the modeling effort is the handling of uncertainty in cost estimates. Monte Carlo–based methods are commonly used to handle uncertainty, especially when implemented by a stand-alone script within a program such as Python or MATLAB. However, a script-based model requires each potential user to have access to a compiler and an executable capable of handling the script. Making the model accessible to multiple independent analysts is best accomplished by implementing the model in a common computing tool such as Microsoft Excel. Excel is readily available and accessible to most system analysts, but it is not designed for straightforward implementation of a Monte Carlo–based method. Using a Monte Carlo algorithm requires in-spreadsheet scripting and statistical analyses or the use of add-ons such as Crystal Ball. An alternative method uses propagation of error calculations in the existing Excel-based system to estimate system cost uncertainty. This method has the advantage of using Microsoft Excel as is, but it requires the use of simplifying assumptions. These assumptions do not necessarily bring into question the analytical results. In fact, the analysis shows that the propagation of error method introduces essentially negligible error, especially when compared to the uncertainty associated with some of the estimates themselves. The results of these uncertainty analyses generally quantify and identify the sources of uncertainty in the overall cost estimation. The obvious generalization—that capital cost uncertainty is the main driver—can be shown to be an accurate generalization for the current state of reactor cost analysis. However, the detailed analysis on a component-by-component basis helps to demonstrate which components would benefit most from research and development to decrease the uncertainty, as well as which components would benefit from research and development to decrease the absolute cost.« less

[A co-word analysis of current research on neonatal jaundice].

PubMed

Bao, Shan; Yang, Xiao-Yan; Tang, Jun; Wu, Jin-Lin; Mu, De-Zhi

2014-08-01

To investigate the research on neonatal jaundice in recent years by co-word analysis and to summarize the hot spots and trend of research in this field in China. The CNKI was searched with "neonate" and "jaundice" as the key words to identify the papers published from January 2009 to July 2013 that were in accordance with strict inclusion and exclusion criteria. To reveal the relationship between different high-frequency key words, Microsoft Office Excel 2013 was used for statistical analysis of key words, and Ucinet 6.0 and Netdraw were used for co-occurrence analysis. A total of 2 054 papers were included, and 44 high-frequency key words were extracted. The current hotspots of research on neonatal jaundice in China were displayed, and the relationship between different high-frequency key words was presented. There has been in-depth research on clinical manifestations and diagnosis of neonatal jaundice in China, but further research is needed to investigate the etiology, mechanism, and treatment of neonatal jaundice.

Buffer$--An Economic Analysis Tool

Treesearch

Gary Bentrup

2007-01-01

Buffer$ is an economic spreadsheet tool for analyzing the cost-benefits of conservation buffers by resource professionals. Conservation buffers are linear strips of vegetation managed for multiple landowner and societal objectives. The Microsoft Excel based spreadsheet can calculate potential income derived from a buffer, including income from cost-share/incentive...

How to Create Automatically Graded Spreadsheets for Statistics Courses

ERIC Educational Resources Information Center

LoSchiavo, Frank M.

2016-01-01

Instructors often use spreadsheet software (e.g., Microsoft Excel) in their statistics courses so that students can gain experience conducting computerized analyses. Unfortunately, students tend to make several predictable errors when programming spreadsheets. Without immediate feedback, programming errors are likely to go undetected, and as a…

Analog Spectrophotometers in the Digital Age: Data Acquisition on a Budget

ERIC Educational Resources Information Center

Nazarenko, Alexander Y.; Nazarenko, Natalie A.

2005-01-01

The interfacing of various spectrometers with analog output to a personal computer running Microsoft Excel in the Windows environment is described. This low cost data acquisition solution is a useful replacement of a chart recorder for various UV-visible and infrared scanning spectrophotometers.

76 FR 9210 - Draft DOC National Aquaculture Policy

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-16

... confidential business information or otherwise sensitive or protected information. All comments and attachments... and NOAA's Online Privacy Policy, we treat your name, city, state, and any comments you provide as... accusations. You may submit attachments to electronic comments in Microsoft Word, Excel, WordPerfect, or Adobe...

Determination of Minimised Kt Values and Boundary Shapes for a Class of Quasi-Rectangular Holes in Infinite Plates

DTIC Science & Technology

2015-07-01

COMPUTING SHAPES AND STRESS DISTRIBUTIONS FOR QUASI-RECTANGULAR HOLES USING EXCEL VBA .......... 35 APPENDIX B: LISTING OF FADD2D INPUT DECK FOR STRESS...from which Kt values may be readily calculated, have been implemented in a Microsoft Excel spreadsheet using the Visual Basic for Applications ( VBA ...Professor Mark E Mear, University of Texas at Austin, and Professor James C Newman Jr, Mississippi State University, for providing access to the

WASP (Write a Scientific Paper) using Excel - 4: Histograms.

PubMed

Grech, Victor

2018-02-01

Plotting data into graphs is a crucial step in data analysis as part of an initial descriptive statistics exercise since it gives the researcher an overview of the shape and nature of the data. Outlier values may also be identified, and these may be incorrect data, or true and important outliers. This paper explains how to access Microsoft Excel's Analysis Toolpak and provides some pointers for the utilisation of the histogram tool within the Toolpak. Copyright © 2018. Published by Elsevier B.V.

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel II. Distribution functions and moments.

PubMed

Langenbucher, Frieder

2003-01-01

MS Excel is a useful tool to handle in vitro/in vivo correlation (IVIVC) distribution functions, with emphasis on the Weibull and the biexponential distribution, which are most useful for the presentation of cumulative profiles, e.g. release in vitro or urinary excretion in vivo, and differential profiles such as the plasma response in vivo. The discussion includes moments (AUC and mean) as summarizing statistics, and data-fitting algorithms for parameter estimation.

Using TARGET Data | Office of Cancer Genomics

Cancer.gov

- ANNOUNCEMENT - The TARGET data matrix will not function properly in Internet Explorer unless the Compatibility View is completely turned off. Visit the How to use Compatibility View in Internet Explorer 9 on the Microsoft Support website for more information. ........................

Web servicing the biological office.

PubMed

Szugat, Martin; Güttler, Daniel; Fundel, Katrin; Sohler, Florian; Zimmer, Ralf

2005-09-01

Biologists routinely use Microsoft Office applications for standard analysis tasks. Despite ubiquitous internet resources, information needed for everyday work is often not directly and seamlessly available. Here we describe a very simple and easily extendable mechanism using Web Services to enrich standard MS Office applications with internet resources. We demonstrate its capabilities by providing a Web-based thesaurus for biological objects, which maps names to database identifiers and vice versa via an appropriate synonym list. The client application ProTag makes these features available in MS Office applications using Smart Tags and Add-Ins. http://services.bio.ifi.lmu.de/prothesaurus/

OP-Yield Version 1.00 user's guide

Treesearch

Martin W. Ritchie; Jianwei Zhang

2018-01-01

OP-Yield is a Microsoft Excel™ spreadsheet with 14 specified user inputs to derive custom yield estimates using the original Oliver and Powers (1978) functions as the foundation. It presents yields for ponderosa pine (Pinus ponderosa Lawson & C. Lawson) plantations in northern California. The basic model forms for dominantand...

46 CFR 535.701 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., Washington, DC 20573-0001. A copy of the Monitoring Report form in Microsoft Word and Excel format may be... Monitoring Reports in the Commission's prescribed electronic format, either on diskette or CD-ROM. (e)(1) The... filed by this subpart may be filed by direct electronic transmission in lieu of hard copy. Detailed...

What Spreadsheet and Database Skills Do Business Students Need?

ERIC Educational Resources Information Center

Coleman, Phillip D.; Blankenship, Ray J.

2017-01-01

The Principles of Information Systems course taught at a medium-sized Midwest University consists of Information Systems conceptual material plus Microsoft Excel and Access skills that the Information Systems faculty feel are most important to business students from all business disciplines. These skills range from using basic mathematic functions…

WASP (Write a Scientific Paper) using Excel - 6: Standard error and confidence interval.

PubMed

Grech, Victor

2018-03-01

The calculation of descriptive statistics includes the calculation of standard error and confidence interval, an inevitable component of data analysis in inferential statistics. This paper provides pointers as to how to do this in Microsoft Excel™. Copyright © 2018 Elsevier B.V. All rights reserved.

Technology Tips: Fool Me Twice, Shame on Me

ERIC Educational Resources Information Center

Stohl, Hollylynne; Harper, Suzanne R.

2005-01-01

Todd Lee and colleagues share some of the common technology "pranks" and peculiarities from the three most common technology tools used in our classrooms: Microsoft Excel, graphing calculators, and The Geometer's Sketchpad. The "Surfing Note" includes a link to a collection of funny math cartoons from the Carolina Biological Supply Company.

Who Will Win?: Predicting the Presidential Election Using Linear Regression

ERIC Educational Resources Information Center

Lamb, John H.

2007-01-01

This article outlines a linear regression activity that engages learners, uses technology, and fosters cooperation. Students generated least-squares linear regression equations using TI-83 Plus[TM] graphing calculators, Microsoft[C] Excel, and paper-and-pencil calculations using derived normal equations to predict the 2004 presidential election.…

Interactive Spreadsheets in JCE Webware

ERIC Educational Resources Information Center

Coleman, William F.; Fedosky, Edward W.

2005-01-01

A description of the Microsoft Excel spreadsheet simulation, Anharmonicity.xls that can be used to smoothly and continuously switch a plotted function and its quadratic approximation is presented. It can be used in a classroom demonstration or incorporated into a student-centered computer-laboratory exercise to examine the qualitative behavior of…

The Relationship of the Officer Evaluation Report to Captain Attrition

DTIC Science & Technology

2001-05-31

especially, Microsoft licensing. The OER plays a significant role in each of these stages, determining or predicting an officer’s potential for career success . The...company command greatly raises expectations for continued career success . Those that have a positive command experience with at least one above center of...system, especially pertaining to branch qualification was reviewed. Nearly 85% had been advised by their branch assignment officer, that future career

Mean values of Arnett's soft tissue analysis in Maratha ethnic (Indian) population - A cephalometric study.

PubMed

Singh, Shikha; Deshmukh, Sonali; Merani, Varsha; Rejintal, Neeta

2016-01-01

The aim of this article is to evaluate the mean cephalometric values for Arnett's soft tissue analysis in the Maratha ethnic (Indian) population. Lateral cephalograms of 60 patients (30 males and 30 females) aged 18-26 years were obtained with the patients in the Natural Head Position (NHP), with teeth in maximum intercuspation and lips in the rest position. Moreover, hand tracings were also done. The statistical analysis was performed with the help of a statistical software, the Statistical Package for the Social Sciences version 16, and Microsoft word and Excel (Microsoft office 2007) were used to generate the analytical data. Statistical significance was tested atP level (1% and 5% level of significance). Statistical analysis using student's unpaired t-test were performed. Various cephalometric values for the Maratha ethnic (Indian) population differed from Caucasian cephalometric values such as nasolabial inclination, incisor proclination, and exposure, which may affect the outcome of the orthodontic and orthognathic treatment. Marathas have more proclined maxillary incisors, less prominent chin, less facial length, acute nasolabial angle, and all soft tissue thickness are greater in Marathas except lower lip thickness (in Maratha males and females) and upper lip angle (in Maratha males) than those of the Caucasian population. It is a fact that all different ethnic races have different facial characters. The variability of the soft tissue integument in people with different ethnic origin makes it necessary to study the soft tissue standards of a particular community and consider those norms when planning an orthodontic and orthognathic treatment for particular racial and ethnic patients.

Development of a Microsoft Excel tool for applying a factor retention criterion of a dimension coefficient to a survey on patient safety culture.

PubMed

Chien, Tsair-Wei; Shao, Yang; Jen, Dong-Hui

2017-10-27

Many quality-of-life studies have been conducted in healthcare settings, but few have used Microsoft Excel to incorporate Cronbach's α with dimension coefficient (DC) for describing a scale's characteristics. To present a computer module that can report a scale's validity, we manipulated datasets to verify a DC that can be used as a factor retention criterion for demonstrating its usefulness in a patient safety culture survey (PSC). Microsoft Excel Visual Basic for Applications was used to design a computer module for simulating 2000 datasets fitting the Rasch rating scale model. The datasets consisted of (i) five dual correlation coefficients (correl. = 0.3, 0.5, 0.7, 0.9, and 1.0) on two latent traits (i.e., true scores) following a normal distribution and responses to their respective 1/3 and 2/3 items in length; (ii) 20 scenarios of item lengths from 5 to 100; and (iii) 20 sample sizes from 50 to 1000. Each item containing 5-point polytomous responses was uniformly distributed in difficulty across a ± 2 logit range. Three methods (i.e., dimension interrelation ≥0.7, Horn's parallel analysis (PA) 95% confidence interval, and individual random eigenvalues) were used for determining one factor to retain. DC refers to the binary classification (1 as one factor and 0 as many factors) used for examining accuracy with the indicators sensitivity, specificity, and area under receiver operating characteristic curve (AUC). The scale's reliability and DC were simultaneously calculated for each simulative dataset. PSC real data were demonstrated with DC to interpret reports of the unit-based construct validity using the author-made MS Excel module. The DC method presented accurate sensitivity (=0.96), specificity (=0.92) with a DC criterion (≥0.70), and AUC (=0.98) that were higher than those of the two PA methods. PA combined with DC yielded good sensitivity (=0.96), specificity (=1.0) with a DC criterion (≥0.70), and AUC (=0.99). Advances in computer technology may enable healthcare users familiar with MS Excel to apply DC as a factor retention criterion for determining a scale's unidimensionality and evaluating a scale's quality.

Utilizing Microsoft[R] Office to Produce and Present Recursive Frame Analysis Findings

ERIC Educational Resources Information Center

Chenail, Ronald J.; Duffy, Maureen

2011-01-01

Although researchers conducting qualitative descriptive studies, ethnographies, phenomenologies, grounded theory, and narrative inquiries commonly use computer-assisted qualitative data analysis software (CAQDAS) to manage their projects and analyses, investigators conducting discursive methodologies such as discourse or conversation analysis seem…

Development and operation of a quality assurance system for deviations from standard operating procedures in a clinical cell therapy laboratory.

PubMed

McKenna, D; Kadidlo, D; Sumstad, D; McCullough, J

2003-01-01

Errors and accidents, or deviations from standard operating procedures, other policy, or regulations must be documented and reviewed, with corrective actions taken to assure quality performance in a cellular therapy laboratory. Though expectations and guidance for deviation management exist, a description of the framework for the development of such a program is lacking in the literature. Here we describe our deviation management program, which uses a Microsoft Access database and Microsoft Excel to analyze deviations and notable events, facilitating quality assurance (QA) functions and ongoing process improvement. Data is stored in a Microsoft Access database with an assignment to one of six deviation type categories. Deviation events are evaluated for potential impact on patient and product, and impact scores for each are determined using a 0- 4 grading scale. An immediate investigation occurs, and corrective actions are taken to prevent future similar events from taking place. Additionally, deviation data is collectively analyzed on a quarterly basis using Microsoft Excel, to identify recurring events or developing trends. Between January 1, 2001 and December 31, 2001 over 2500 products were processed at our laboratory. During this time period, 335 deviations and notable events occurred, affecting 385 products and/or patients. Deviations within the 'technical error' category were most common (37%). Thirteen percent of deviations had a patient and/or a product impact score > or = 2, a score indicating, at a minimum, potentially affected patient outcome or moderate effect upon product quality. Real-time analysis and quarterly review of deviations using our deviation management program allows for identification and correction of deviations. Monitoring of deviation trends allows for process improvement and overall successful functioning of the QA program in the cell therapy laboratory. Our deviation management program could serve as a model for other laboratories in need of such a program.

75 FR 52921 - Fisheries in the Western Pacific; Hawaii Bottomfish and Seamount Groundfish; Management Measures...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... anonymous). Attachments to electronic comments will be accepted in Microsoft Word or Excel, WordPerfect, or Adobe PDF file formats only. Amendment 2 to the Fishery Ecosystem Plan for the Hawaiian Archipelago....gpoaccess.gov/fr . Fishing for pelagic armorhead is managed under the Fishery Ecosystem Plan for the...

77 FR 42688 - Snapper-Grouper Fishery Off the Southern Atlantic States; Snapper-Grouper Management Measures

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... proposed rule to implement a regulatory amendment (Regulatory Amendment 12) to the Fishery Management Plan... can also attach additional files (up to 10MB) in Microsoft Word, Excel, WordPerfect, or Adobe PDF file... benefit to the nation, particularly with respect to providing food production and recreational...

Community Solar Scenario Tool | Integrated Energy Solutions | NREL

Science.gov Websites

Community Solar Scenario Tool Community Solar Scenario Tool The Community Solar Scenario Tool (CSST ) provides a "first cut" analysis of different community or shared solar program options. NREL sponsoring utility. Community Solar Scenario Tool -Beta Version Available as a Microsoft Excel file, which

Collection Analysis: Powerful Ways To Collect, Analyze, and Present Your Data.

ERIC Educational Resources Information Center

Hart, Amy

2003-01-01

Discussion of collection analysis in school libraries focuses on the kinds of data used and how to use library automation software to collect the data. Describes the use of Microsoft Excel and its chart-making capabilities to enhance the presentation of the analysis and suggests ways to use collection analysis output. (LRW)

Working Together: Google Apps Goes to School

ERIC Educational Resources Information Center

Oishi, Lindsay

2007-01-01

Online collaboration and project-management tools allow people to work together without being in the same place at the same time. However, that is not all, Google Docs & Spreadsheets, for example, allows the creation of documents and spreadsheets just like in Microsoft Word and Excel, but with more collaborative capacity. Google Calendar lets…

Using Microsoft Excel[R] to Calculate Descriptive Statistics and Create Graphs

ERIC Educational Resources Information Center

Carr, Nathan T.

2008-01-01

Descriptive statistics and appropriate visual representations of scores are important for all test developers, whether they are experienced testers working on large-scale projects, or novices working on small-scale local tests. Many teachers put in charge of testing projects do not know "why" they are important, however, and are utterly convinced…

Using Animated Agents in Learner-Controlled Training: The Effects of Design Control

ERIC Educational Resources Information Center

Behrend, Tara S.; Thompson, Lori Foster

2012-01-01

Animated agents have the potential to increase engagement and learning during online training by acting as personalized tutors. However, little is known about the conditions that make these agents most effective. In this study, 183 e-learners completed a Microsoft Excel training course. Approximately half were assigned an agent with predetermined…

Generating Variable and Random Schedules of Reinforcement Using Microsoft Excel Macros

ERIC Educational Resources Information Center

Bancroft, Stacie L.; Bourret, Jason C.

2008-01-01

Variable reinforcement schedules are used to arrange the availability of reinforcement following varying response ratios or intervals of time. Random reinforcement schedules are subtypes of variable reinforcement schedules that can be used to arrange the availability of reinforcement at a constant probability across number of responses or time.…

Probability & Perception: The Representativeness Heuristic in Action

ERIC Educational Resources Information Center

Lu, Yun; Vasko, Francis J.; Drummond, Trevor J.; Vasko, Lisa E.

2014-01-01

If the prospective students of probability lack a background in mathematical proofs, hands-on classroom activities may work well to help them to learn to analyze problems correctly. For example, students may physically roll a die twice to count and compare the frequency of the sequences. Tools such as graphing calculators or Microsoft Excel®…

A Simple and Convenient Method of Multiple Linear Regression to Calculate Iodine Molecular Constants

ERIC Educational Resources Information Center

Cooper, Paul D.

2010-01-01

A new procedure using a student-friendly least-squares multiple linear-regression technique utilizing a function within Microsoft Excel is described that enables students to calculate molecular constants from the vibronic spectrum of iodine. This method is advantageous pedagogically as it calculates molecular constants for ground and excited…

76 FR 13887 - Fisheries of the Northeastern United States; Atlantic Mackerel, Squid, and Butterfish (MSB...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-15

... comments in Microsoft Word, Excel, WordPerfect, or Adobe PDF file formats only. FOR FURTHER INFORMATION... butterfish stock was overfished. The Mid-Atlantic Fishery Management Council (Council) developed Amendment 10 to the FMP in response to SAW 38; Amendment 10 enacted a rebuilding program for butterfish, as well...

Solving Common Mathematical Problems

NASA Technical Reports Server (NTRS)

Luz, Paul L.

2005-01-01

Mathematical Solutions Toolset is a collection of five software programs that rapidly solve some common mathematical problems. The programs consist of a set of Microsoft Excel worksheets. The programs provide for entry of input data and display of output data in a user-friendly, menu-driven format, and for automatic execution once the input data has been entered.

Simplified Application of Material Efficiency Green Metrics to Synthesis Plans: Pedagogical Case Studies Selected from "Organic Syntheses"

ERIC Educational Resources Information Center

Andraos, John

2015-01-01

This paper presents a simplified approach for the application of material efficiency metrics to linear and convergent synthesis plans encountered in organic synthesis courses. Computations are facilitated and automated using intuitively designed Microsoft Excel spreadsheets without invoking abstract mathematical formulas. The merits of this…

78 FR 49061 - Valuation of Federal Coal for Advance Royalty Purposes and Information Collection Applicable to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-12

... use available information technology (for example: Spreadsheet programs, i.e., Microsoft Excel, web...) 231- 3221, or by email at [email protected] . SUPPLEMENTARY INFORMATION: I. Background A. Pre... part 1218, subpart I, titled ``Federal Coal Advance Royalty.'' B. The EPAct On August 8, 2005, the...

Hands-On Learning: A Problem-Based Approach to Teaching Microsoft Excel

ERIC Educational Resources Information Center

Slayter, Erik; Higgins, Lindsey M.

2018-01-01

The development of a student's ability to make data-driven decisions has become a focus in higher education (Schield 1999; Stephenson and Caravello 2007). Data literacy, the ability to understand and use data to effectively inform decisions, is a fundamental component of information competence (Mandinach and Gummer 2013; Stephenson and Caravello,…

Preliminary Drivers Associated with Household Food Waste Generation in South Africa

ERIC Educational Resources Information Center

Ramukhwatho, Fhumulani; duPlessis, Roelien; Oelofse, Suzan

2018-01-01

This study assessed the potential drivers of household food wastage in the City of Tshwane Metropolitan Municipality. A total of 210 participants were interviewed face-to-face using structured questionnaire. The acquired data were captured in Microsoft Excel, and analyzed using the chi-square statistical test and SAS statistical software. The main…

An Innovative Spreadsheet Application to Teach Management Science Decision Criteria

ERIC Educational Resources Information Center

Hozak, Kurt

2018-01-01

This article describes a Microsoft Excel-based application that uses humorous voice synthesis and timed competition to make it more fun and engaging to learn management science decision criteria. In addition to providing immediate feedback and easily customizable tips that facilitate self-learning, the software randomly generates both the problem…

A Stream Runs through IT: Using Streaming Video to Teach Information Technology

ERIC Educational Resources Information Center

Nicholson, Jennifer; Nicholson, Darren B.

2010-01-01

Purpose: The purpose of this paper is to report student and faculty perceptions from an introductory management information systems course that uses multimedia, specifically streaming video, as a vehicle for teaching students skills in Microsoft Excel and Access. Design/methodology/approach: Student perceptions are captured via a qualitative…

A Computational Study of the Energy Dissipation Through an Acrylic Target Impacted by Various Size FSP

DTIC Science & Technology

2009-06-01

data, and then returns an array that describes the line. This function, when compared to the LOGEST statistical function of the Microsoft Excel, which...threats continues to grow, the ability to predict materials performances using advanced modeling tools increases. The current paper has demonstrated

ARS-Media: A spreadsheet tool for calculating media recipes based on ion-specific constraints

USDA-ARS?s Scientific Manuscript database

ARS-Media is an ion solution calculator that uses Microsoft Excel to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Thus, the recipes are generated using ...

Strengthening 4-H by Analyzing Enrollment Data

ERIC Educational Resources Information Center

Hamilton, Stephen F.; Northern, Angela; Neff, Robert

2014-01-01

The study reported here used data from the ACCESS 4-H Enrollment System to gain insight into strengthening New York State's 4-H programming. Member enrollment lists from 2009 to 2012 were analyzed using Microsoft Excel to determine trends and dropout rates. The descriptive data indicate declining 4-H enrollment in recent years and peak enrollment…

Manpower and Personnel and Logistics Analysis in the Palletized Load System (PLS)

DTIC Science & Technology

1994-10-01

models used algonthms sanctioned byE AR 570-2 and were written in Microsoft Excel version 4.0 software. HARDMAN comparative methodology (HCM) formed the...357281300) contained forty-eight vehiclks. The medium ftrck company taxing the 5 ton tractorl with in Mg7l wailer (SRC 33721LI00) cotained sixty

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wahanani, Nursinta Adi, E-mail: sintaadi@batan.go.id; Natsir, Khairina, E-mail: sintaadi@batan.go.id; Hartini, Entin, E-mail: sintaadi@batan.go.id

Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this softwaremore » 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu{sup 239} and Pu{sup 241}. Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis.« less

Numerics made easy: solving the Navier-Stokes equation for arbitrary channel cross-sections using Microsoft Excel.

PubMed

Richter, Christiane; Kotz, Frederik; Giselbrecht, Stefan; Helmer, Dorothea; Rapp, Bastian E

2016-06-01

The fluid mechanics of microfluidics is distinctively simpler than the fluid mechanics of macroscopic systems. In macroscopic systems effects such as non-laminar flow, convection, gravity etc. need to be accounted for all of which can usually be neglected in microfluidic systems. Still, there exists only a very limited selection of channel cross-sections for which the Navier-Stokes equation for pressure-driven Poiseuille flow can be solved analytically. From these equations, velocity profiles as well as flow rates can be calculated. However, whenever a cross-section is not highly symmetric (rectangular, elliptical or circular) the Navier-Stokes equation can usually not be solved analytically. In all of these cases, numerical methods are required. However, in many instances it is not necessary to turn to complex numerical solver packages for deriving, e.g., the velocity profile of a more complex microfluidic channel cross-section. In this paper, a simple spreadsheet analysis tool (here: Microsoft Excel) will be used to implement a simple numerical scheme which allows solving the Navier-Stokes equation for arbitrary channel cross-sections.

Micrometeoroid and Orbital Debris (MMOD) Shield Ballistic Limit Analysis Program

NASA Technical Reports Server (NTRS)

Ryan, Shannon

2013-01-01

This software implements penetration limit equations for common micrometeoroid and orbital debris (MMOD) shield configurations, windows, and thermal protection systems. Allowable MMOD risk is formulated in terms of the probability of penetration (PNP) of the spacecraft pressure hull. For calculating the risk, spacecraft geometry models, mission profiles, debris environment models, and penetration limit equations for installed shielding configurations are required. Risk assessment software such as NASA's BUMPERII is used to calculate mission PNP; however, they are unsuitable for use in shield design and preliminary analysis studies. The software defines a single equation for the design and performance evaluation of common MMOD shielding configurations, windows, and thermal protection systems, along with a description of their validity range and guidelines for their application. Recommendations are based on preliminary reviews of fundamental assumptions, and accuracy in predicting experimental impact test results. The software is programmed in Visual Basic for Applications for installation as a simple add-in for Microsoft Excel. The user is directed to a graphical user interface (GUI) that requires user inputs and provides solutions directly in Microsoft Excel workbooks.

Validity of the Microsoft Kinect for measurement of neck angle: comparison with electrogoniometry.

PubMed

Allahyari, Teimour; Sahraneshin Samani, Ali; Khalkhali, Hamid-Reza

2017-12-01

Considering the importance of evaluating working postures, many techniques and tools have been developed to identify and eliminate awkward postures and prevent musculoskeletal disorders (MSDs). The introduction of the Microsoft Kinect sensor, which is a low-cost, easy to set up and markerless motion capture system, offers promising possibilities for postural studies. Considering the Kinect's special ability in head-pose and facial-expression tracking and complexity of cervical spine movements, this study aimed to assess concurrent validity of the Microsoft Kinect against an electrogoniometer for neck angle measurements. A special software program was developed to calculate the neck angle based on Kinect skeleton tracking data. Neck angles were measured simultaneously by electrogoniometer and the developed software program in 10 volunteers. The results were recorded in degrees and the time required for each method was also measured. The Kinect's ability to identify body joints was reliable and precise. There was moderate to excellent agreement between the Kinect-based method and the electrogoniometer (paired-sample t test, p ≥ 0.25; intraclass correlation for test-retest reliability, ≥0.75). Kinect-based measurement was much faster and required less equipment, but accurate measurement with Microsoft Kinect was only possible if the participant was in its field of view.

Computational tools for fitting the Hill equation to dose-response curves.

PubMed

Gadagkar, Sudhindra R; Call, Gerald B

2015-01-01

Many biological response curves commonly assume a sigmoidal shape that can be approximated well by means of the 4-parameter nonlinear logistic equation, also called the Hill equation. However, estimation of the Hill equation parameters requires access to commercial software or the ability to write computer code. Here we present two user-friendly and freely available computer programs to fit the Hill equation - a Solver-based Microsoft Excel template and a stand-alone GUI-based "point and click" program, called HEPB. Both computer programs use the iterative method to estimate two of the Hill equation parameters (EC50 and the Hill slope), while constraining the values of the other two parameters (the minimum and maximum asymptotes of the response variable) to fit the Hill equation to the data. In addition, HEPB draws the prediction band at a user-defined confidence level, and determines the EC50 value for each of the limits of this band to give boundary values that help objectively delineate sensitive, normal and resistant responses to the drug being tested. Both programs were tested by analyzing twelve datasets that varied widely in data values, sample size and slope, and were found to yield estimates of the Hill equation parameters that were essentially identical to those provided by commercial software such as GraphPad Prism and nls, the statistical package in the programming language R. The Excel template provides a means to estimate the parameters of the Hill equation and plot the regression line in a familiar Microsoft Office environment. HEPB, in addition to providing the above results, also computes the prediction band for the data at a user-defined level of confidence, and determines objective cut-off values to distinguish among response types (sensitive, normal and resistant). Both programs are found to yield estimated values that are essentially the same as those from standard software such as GraphPad Prism and the R-based nls. Furthermore, HEPB also has the option to simulate 500 response values based on the range of values of the dose variable in the original data and the fit of the Hill equation to that data. Copyright © 2014. Published by Elsevier Inc.

Online Interactive Tutorials for Creating Graphs With Excel 2007 or 2010

PubMed Central

Vanselow, Nicholas R

2012-01-01

Graphic display of clinical data is a useful tool for the behavior-analytic clinician. However, graphs can sometimes be difficult to create. We describe how to access and use an online interactive tutorial that teaches the user to create a variety of graphs often used by behavior analysts. Three tutorials are provided that cover the basics of Microsoft Excel 2007 or 2010, creating graphs for clinical purposes, and creating graphs for research purposes. The uses for this interactive tutorial and other similar programs are discussed. PMID:23326629

An Excel Macro to Plot the HFE-Diagram to Identify Sea Water Intrusion Phases.

PubMed

Giménez-Forcada, Elena; Sánchez San Román, F Javier

2015-01-01

A hydrochemical facies evolution diagram (HFE-D) is a multirectangular diagram, which is a useful tool in the interpretation of sea water intrusion processes. This method note describes a simple method for generating an HFE-D plot using the spreadsheet software package, Microsoft Excel. The code was applied to groundwater from the alluvial coastal plain of Grosseto (Tuscany, Italy), which is characterized by a complex salinization process in which sea water mixes with sulfate or bicarbonate recharge water. © 2014, National GroundWater Association.

Online interactive tutorials for creating graphs with excel 2007 or 2010.

PubMed

Vanselow, Nicholas R; Bourret, Jason C

2012-01-01

Graphic display of clinical data is a useful tool for the behavior-analytic clinician. However, graphs can sometimes be difficult to create. We describe how to access and use an online interactive tutorial that teaches the user to create a variety of graphs often used by behavior analysts. Three tutorials are provided that cover the basics of Microsoft Excel 2007 or 2010, creating graphs for clinical purposes, and creating graphs for research purposes. The uses for this interactive tutorial and other similar programs are discussed.

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel: V. Predictive absorbability models.

PubMed

Langenbucher, Frieder

2007-08-01

This paper discusses Excel applications related to the prediction of drug absorbability from physicochemical constants. PHDISSOC provides a generalized model for pH profiles of electrolytic dissociation, water solubility, and partition coefficient. SKMODEL predicts drug absorbability, based on a log-log plot of water solubility and O/W partitioning; augmented by additional features such as electrolytic dissociation, melting point, and the dose administered. GIABS presents a mechanistic model of g.i. drug absorption. BIODATCO presents a database compiling relevant drug data to be used for quantitative predictions.

Graphing techniques for materials laboratory using Excel

NASA Technical Reports Server (NTRS)

Kundu, Nikhil K.

1994-01-01

Engineering technology curricula stress hands on training and laboratory practices in most of the technical courses. Laboratory reports should include analytical as well as graphical evaluation of experimental data. Experience shows that many students neither have the mathematical background nor the expertise for graphing. This paper briefly describes the procedure and data obtained from a number of experiments such as spring rate, stress concentration, endurance limit, and column buckling for a variety of materials. Then with a brief introduction to Microsoft Excel the author explains the techniques used for linear regression and logarithmic graphing.

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel: IV. Generalized matrix analysis of linear compartment systems.

PubMed

Langenbucher, Frieder

2005-01-01

A linear system comprising n compartments is completely defined by the rate constants between any of the compartments and the initial condition in which compartment(s) the drug is present at the beginning. The generalized solution is the time profiles of drug amount in each compartment, described by polyexponential equations. Based on standard matrix operations, an Excel worksheet computes the rate constants and the coefficients, finally the full time profiles for a specified range of time values.

Uncertainty in Measurement: A Review of Monte Carlo Simulation Using Microsoft Excel for the Calculation of Uncertainties Through Functional Relationships, Including Uncertainties in Empirically Derived Constants

PubMed Central

Farrance, Ian; Frenkel, Robert

2014-01-01

The Guide to the Expression of Uncertainty in Measurement (usually referred to as the GUM) provides the basic framework for evaluating uncertainty in measurement. The GUM however does not always provide clearly identifiable procedures suitable for medical laboratory applications, particularly when internal quality control (IQC) is used to derive most of the uncertainty estimates. The GUM modelling approach requires advanced mathematical skills for many of its procedures, but Monte Carlo simulation (MCS) can be used as an alternative for many medical laboratory applications. In particular, calculations for determining how uncertainties in the input quantities to a functional relationship propagate through to the output can be accomplished using a readily available spreadsheet such as Microsoft Excel. The MCS procedure uses algorithmically generated pseudo-random numbers which are then forced to follow a prescribed probability distribution. When IQC data provide the uncertainty estimates the normal (Gaussian) distribution is generally considered appropriate, but MCS is by no means restricted to this particular case. With input variations simulated by random numbers, the functional relationship then provides the corresponding variations in the output in a manner which also provides its probability distribution. The MCS procedure thus provides output uncertainty estimates without the need for the differential equations associated with GUM modelling. The aim of this article is to demonstrate the ease with which Microsoft Excel (or a similar spreadsheet) can be used to provide an uncertainty estimate for measurands derived through a functional relationship. In addition, we also consider the relatively common situation where an empirically derived formula includes one or more ‘constants’, each of which has an empirically derived numerical value. Such empirically derived ‘constants’ must also have associated uncertainties which propagate through the functional relationship and contribute to the combined standard uncertainty of the measurand. PMID:24659835

Uncertainty in measurement: a review of monte carlo simulation using microsoft excel for the calculation of uncertainties through functional relationships, including uncertainties in empirically derived constants.

PubMed

Farrance, Ian; Frenkel, Robert

2014-02-01

The Guide to the Expression of Uncertainty in Measurement (usually referred to as the GUM) provides the basic framework for evaluating uncertainty in measurement. The GUM however does not always provide clearly identifiable procedures suitable for medical laboratory applications, particularly when internal quality control (IQC) is used to derive most of the uncertainty estimates. The GUM modelling approach requires advanced mathematical skills for many of its procedures, but Monte Carlo simulation (MCS) can be used as an alternative for many medical laboratory applications. In particular, calculations for determining how uncertainties in the input quantities to a functional relationship propagate through to the output can be accomplished using a readily available spreadsheet such as Microsoft Excel. The MCS procedure uses algorithmically generated pseudo-random numbers which are then forced to follow a prescribed probability distribution. When IQC data provide the uncertainty estimates the normal (Gaussian) distribution is generally considered appropriate, but MCS is by no means restricted to this particular case. With input variations simulated by random numbers, the functional relationship then provides the corresponding variations in the output in a manner which also provides its probability distribution. The MCS procedure thus provides output uncertainty estimates without the need for the differential equations associated with GUM modelling. The aim of this article is to demonstrate the ease with which Microsoft Excel (or a similar spreadsheet) can be used to provide an uncertainty estimate for measurands derived through a functional relationship. In addition, we also consider the relatively common situation where an empirically derived formula includes one or more 'constants', each of which has an empirically derived numerical value. Such empirically derived 'constants' must also have associated uncertainties which propagate through the functional relationship and contribute to the combined standard uncertainty of the measurand.

Linux thin-client conversion in a large cardiology practice: initial experience.

PubMed

Echt, Martin P; Rosen, Jordan

2004-01-01

Capital Cardiology Associates (CCA) is a single-specialty cardiology practice with offices in New York and Massachusetts. In 2003, CCA converted its IT system from a Microsoft-based network to a Linux network employing Linux thin-client technology with overall positive outcomes.

Linked Up for Learning.

ERIC Educational Resources Information Center

Gates, Bill

1996-01-01

The Chief Executive Office of Microsoft Corporation urges more complete integration of technology into higher education. He offers specific examples of how such integration can provide a new way to learn (such as accessing information on the Internet and using individually paced instruction) and efficient distance learning. Colleges and…

Taking It Online: A Bootstraps Approach.

ERIC Educational Resources Information Center

Sabine, Ginger; Gilley, Daryl

This paper describes the process of creating an online course at the Northwestern Technical Institute (Georgia) using locally produced lessons, supplemental text, threaded discussion groups, online examinations, and student access to a transparent third party URL (Uniform Resource Locator). The course, developed for the Microsoft Office User…

Association Between Baseline Blood Pressures, Heart Rates, and Vasovagal Syncope in Children and Adolescents.

PubMed

Adlakha, Himanshu; Gupta, Ruchi; Hassan, Romana; Kern, Jeffrey H

2018-01-28

Vasovagal syncope is the most common cause of syncope in children and adults, accounting for 50-66% of unexplained syncope. There are no studies establishing the relationship between syncope, baseline heart rate, and blood pressure. To identify a possible association between baseline blood pressure and heart rate with syncope. We conducted a questionnaire-based chart review study. A questionnaire was distributed to the guardian of children between eight and 18 years of age who attended the Pediatric Ambulatory Care Clinic at Flushing Hospital Medical Center. Based on the responses in the questionnaire, subjects were classified either as cases (positive for syncope) or controls (negative for syncope). Children and adolescents with neurological, cardiac, or any medical condition that can cause syncopal episodes were excluded from the study. Data collected from the questionnaire included age, gender, ethnicity, medical history, family history of syncope, and the amount of salt used in food. Anthropometric and vital signs for the current visit (height, weight, BMI, blood pressure, and heart rate) and vital signs from two previous visits were collected from electronic medical records. The data was analyzed using t-test and chi-square test with Microsoft Excel software (Microsoft Office Standard, v. 14, Microsoft; 2010); p<0.05 was considered significant. A total of 197 subjects were included in this study. There were 18 cases and 179 controls. Of the cases, (4/18) 22.2% were more likely to have a systolic blood pressure lower than the 10th percentile for their gender, age, and height as compared with controls (7/179) 3.9%, p = 0.003. The subjects with a history of syncope were more likely to add salt to their food (p = 0.004). There were no significant differences between cases and controls for age, gender, ethnicity between cases and controls for systolic blood pressure. No significant difference was observed between the heart rates of cases and controls. Children and adolescents with syncope were more likely to have a systolic blood pressure lower than the 10th percentile, and there was no difference in the baseline heart rate. In addition, children with syncope were more likely to add salt to their food.

A randomised feasibility study to investigate the impact of education and the addition of prompts on the sedentary behaviour of office workers.

PubMed

O'Dolan, Catriona; Grant, Margaret; Lawrence, Maggie; Dall, Philippa

2018-01-01

Office workers have been identified as being at risk of accumulating high amounts of sedentary time in prolonged events during work hours, which has been associated with increased risk of a number of long-term health conditions.There is some evidence that providing advice to stand at regular intervals during the working day, and using computer-based prompts, can reduce sedentary behaviour in office workers. However, evidence of effectiveness, feasibility and acceptability for these types of intervention is currently limited. A 2-arm, parallel group, cluster-randomised feasibility trial to assess the acceptability of prompts to break up sedentary behaviour was conducted with office workers in a commercial bank ( n  = 21). Participants were assigned to an education only group (EG) or prompt and education group (PG). Both groups received education on reducing and breaking up sitting at work, and the PG also received hourly prompts, delivered by Microsoft Outlook over 10 weeks, reminding them to stand. Objective measurements of sedentary behaviour were made using activPAL monitors worn at three time points: baseline, in the last 2 weeks of the intervention period and 12 weeks after the intervention. Focus groups were conducted to explore the acceptability of the intervention and the motivations and barriers to changing sedentary behaviour. Randomly generated, customised prompts, delivered by Microsoft Outlook, with messages about breaking up sitting, proved to be a feasible and acceptable way of delivering prompts to office workers. Participants in both groups reduced their sitting, but changes were not maintained at follow-up. The education session seemed to increase outcome expectations of the benefits of changing sedentary behaviour and promote self-regulation of behaviour in some participants. However, low self-efficacy and a desire to conform to cultural norms were barriers to changing behaviour. Prompts delivered by Microsoft Outlook were a feasible, low-cost way of prompting office workers to break up their sedentary behaviour, although further research is needed to determine whether this has an additional impact on sedentary behaviour, to education alone. The role of cultural norms, and promoting self-efficacy, should be considered in the design of future interventions. This study was registered retrospectively as a clinical trial on ClinicalTrials.gov (ID no. NCT02609282) on 23 March 2015.

Application of visual basic in high-throughput mass spectrometry-directed purification of combinatorial libraries.

PubMed

Li, B; Chan, E C Y

2003-01-01

We present an approach to customize the sample submission process for high-throughput purification (HTP) of combinatorial parallel libraries using preparative liquid chromatography electrospray ionization mass spectrometry. In this study, Visual Basic and Visual Basic for Applications programs were developed using Microsoft Visual Basic 6 and Microsoft Excel 2000, respectively. These programs are subsequently applied for the seamless electronic submission and handling of data for HTP. Functions were incorporated into these programs where medicinal chemists can perform on-line verification of the purification status and on-line retrieval of postpurification data. The application of these user friendly and cost effective programs in our HTP technology has greatly increased our work efficiency by reducing paper work and manual manipulation of data.

Using Excel To Study The Relation Between Protein Dihedral Angle Omega And Backbone Length

NASA Astrophysics Data System (ADS)

Shew, Christopher; Evans, Samari; Tao, Xiuping

How to involve the uninitiated undergraduate students in computational biophysics research? We made use of Microsoft Excel to carry out calculations of bond lengths, bond angles and dihedral angles of proteins. Specifically, we studied protein backbone dihedral angle omega by examining how its distribution varies with the length of the backbone length. It turns out Excel is a respectable tool for this task. An ordinary current-day desktop or laptop can handle the calculations for midsized proteins in just seconds. Care has to be taken to enter the formulas for the spreadsheet column after column to minimize the computing load. Supported in part by NSF Grant #1238795.

[Construction of abridged life table for health evaluation of local resident using Excel program].

PubMed

Chen, Qingsha; Wang, Feng; Li, Xiaozhen; Yang, Jian; Yu, Shouyi; Hu, Jun

2012-05-01

To provide an easy computational tool for evaluating the health condition of local residents. An abridged life table was programmed by applying mathematical functions and formula in Excel program and tested with the real study data to evaluate the results computed. The Excel was capable of computing group death probability of age in the life table ((n)q(x)), number of survivors (l(x)), number of death ((n)d(x)), survival per person-year ((n)L(x)), survival total per person-year (T(x)) and life expectancy (e(x)). The calculated results were consistent with those by SAS. The abridged life table constructed using Microsoft Excel can conveniently and accurately calculate the relevant indices for evaluating the health condition of the residents.

A guide for the laboratory information management system (LIMS) for light stable isotopes--Versions 7 and 8

USGS Publications Warehouse

Coplen, Tyler B.

2000-01-01

The reliability and accuracy of isotopic data can be improved by utilizing database software to (i) store information about samples, (ii) store the results of mass spectrometric isotope-ratio analyses of samples, (iii) calculate analytical results using standardized algorithms stored in a database, (iv) normalize stable isotopic data to international scales using isotopic reference materials, and (v) generate multi-sheet paper templates for convenient sample loading of automated mass-spectrometer sample preparation manifolds. Such a database program, the Laboratory Information Management System (LIMS) for Light Stable Isotopes, is presented herein. Major benefits of this system include (i) a dramatic improvement in quality assurance, (ii) an increase in laboratory efficiency, (iii) a reduction in workload due to the elimination or reduction of retyping of data by laboratory personnel, and (iv) a decrease in errors in data reported to sample submitters. Such a database provides a complete record of when and how often laboratory reference materials have been analyzed and provides a record of what correction factors have been used through time. It provides an audit trail for laboratories. LIMS for Light Stable Isotopes is available for both Microsoft Office 97 Professional and Microsoft Office 2000 Professional as versions 7 and 8, respectively. Both source code (mdb file) and precompiled executable files (mde) are available. Numerous improvements have been made for continuous flow isotopic analysis in this version (specifically 7.13 for Microsoft Access 97 and 8.13 for Microsoft Access 2000). It is much easier to import isotopic results from Finnigan ISODAT worksheets, even worksheets on which corrections for amount of sample (linearity corrections) have been added. The capability to determine blank corrections using isotope mass balance from analyses of elemental analyzer samples has been added. It is now possible to calculate and apply drift corrections to isotopic data based on the time of day of analysis. Whereas Finnigan ISODAT software is confined to using only a single peak for calculating delta values, LIMS now enables one to use the mean of two or more reference injections during a continuous flow analysis to calculate delta values. This is useful with Finnigan?s GasBench II online sample preparation system. Concentrations of carbon, nitrogen, and sulfur can be calculated based one or more isotopic reference materials analyzed with a group of samples. Both sample data and isotopic analysis data can now be exported to Excel files. A calculator for determining the amount of sample needed for isotopic analysis based on a previous amount of sample and continuous flow area is now an integral part of LIMS for Light Stable Isotopes. LIMS for Light Stable Isotopes can now assign an error code to Finnigan elemental analyzer analyses in which one of the electrometers has saturated due to analysis of too much sample material, giving rise to incorrect isotopic abundances. Information on downloading this report and downloading code and databases is provided at the Internet addresses: http://water.usgs.gov/software/geochemical.html or http://www.geogr.uni-jena.de/software/geochemical.html in the Eastern Hemisphere.

Students Computer Literacy: Perception versus Reality

ERIC Educational Resources Information Center

Wilkinson, Kelly

2006-01-01

Students believe that they are computer literate. When asked, students perceive themselves as skilled in a variety of computer applications. This research compares students' perceptions with their reality. Students did not perform well on pretests of Microsoft Office, but improved their posttests scores with instruction. The study also examined…

Development of a Microsoft Excel tool for one-parameter Rasch model of continuous items: an application to a safety attitude survey.

PubMed

Chien, Tsair-Wei; Shao, Yang; Kuo, Shu-Chun

2017-01-10

Many continuous item responses (CIRs) are encountered in healthcare settings, but no one uses item response theory's (IRT) probabilistic modeling to present graphical presentations for interpreting CIR results. A computer module that is programmed to deal with CIRs is required. To present a computer module, validate it, and verify its usefulness in dealing with CIR data, and then to apply the model to real healthcare data in order to show how the CIR that can be applied to healthcare settings with an example regarding a safety attitude survey. Using Microsoft Excel VBA (Visual Basic for Applications), we designed a computer module that minimizes the residuals and calculates model's expected scores according to person responses across items. Rasch models based on a Wright map and on KIDMAP were demonstrated to interpret results of the safety attitude survey. The author-made CIR module yielded OUTFIT mean square (MNSQ) and person measures equivalent to those yielded by professional Rasch Winsteps software. The probabilistic modeling of the CIR module provides messages that are much more valuable to users and show the CIR advantage over classic test theory. Because of advances in computer technology, healthcare users who are familiar to MS Excel can easily apply the study CIR module to deal with continuous variables to benefit comparisons of data with a logistic distribution and model fit statistics.

EIVAN - AN INTERACTIVE ORBITAL TRAJECTORY PLANNING TOOL

NASA Technical Reports Server (NTRS)

Brody, A. R.

1994-01-01

The Interactive Orbital Trajectory planning Tool, EIVAN, is a forward looking interactive orbit trajectory plotting tool for use with Proximity Operations (operations occurring within a one kilometer sphere of the space station) and other maneuvers. The result of vehicle burns on-orbit is very difficult to anticipate because of non-linearities in the equations of motion governing orbiting bodies. EIVAN was developed to plot resulting trajectories, to provide a better comprehension of orbital mechanics effects, and to help the user develop heuristics for onorbit mission planning. EIVAN comprises a worksheet and a chart from Microsoft Excel on a Macintosh computer. The orbital path for a user-specified time interval is plotted given operator burn inputs. Fuel use is also calculated. After the thrust parameters (magnitude, direction, and time) are input, EIVAN plots the resulting trajectory. Up to five burns may be inserted at any time in the mission. Twenty data points are plotted for each burn and the time interval can be varied to accommodate any desired time frame or degree of resolution. Since the number of data points for each burn is constant, the mission duration can be increased or decreased by increasing or decreasing the time interval. The EIVAN program runs with Microsoft's Excel for execution on a Macintosh running Macintosh OS. A working knowledge of Excel is helpful, but not imperative, for interacting with EIVAN. The program was developed in 1989.

A Computer-Based Laboratory Project for the Study of Stimulus Generalization and Peak Shift

ERIC Educational Resources Information Center

Derenne, Adam; Loshek, Eevett

2009-01-01

This paper describes materials designed for classroom projects on stimulus generalization and peak shift. A computer program (originally written in QuickBASIC) is used for data collection and a Microsoft Excel file with macros organizes the raw data on a spreadsheet and creates generalization gradients. The program is designed for use with human…

Michael Woodhouse | NREL

Science.gov Websites

, physics and chemistry. (1998-2002) Featured Publications Fu, R., T.L. James, M. Woodhouse. "Economic /10.1039/C3EE40701B. Goodrich, A., P. Hacke, Q. Wang, B. Sopori, R. Margolis, T.L. James, and Woodhouse, M InformationMicrosoft Excel. Woodhouse, M., A. Goodrich, R. Margolis, T.L. James, M. Lokanc, and R. Eggert. "

Developing Weight Training Programs with Microsoft Excel: Techtorial #2. Article #3 in a 6-Part Series

ERIC Educational Resources Information Center

Mears, Derrick

2009-01-01

Developing personalized fitness programs to meet individual needs of students can be an overwhelming task for the physical educator. The National Standards for Physical Education (NASPE) indicate that students should achieve and maintain appropriate levels of physical fitness. To effectively meet standards with the growing diversity of curricular…

ALOG user's manual: A Guide to using the spreadsheet-based artificial log generator

Treesearch

Matthew F. Winn; Philip A. Araman; Randolph H. Wynne

2012-01-01

Computer programs that simulate log sawing can be valuable training tools for sawyers, as well as a means oftesting different sawing patterns. Most available simulation programs rely on diagrammed-log databases, which canbe very costly and time consuming to develop. Artificial Log Generator (ALOG) is a user-friendly Microsoft® Excel®...

Using Microsoft Excel to Assess Standards: A "Techtorial". Article #2 in a 6-Part Series

ERIC Educational Resources Information Center

Mears, Derrick

2009-01-01

Standards-based assessment is a term currently being used quite often in educational reform discussions. The philosophy behind this initiative is to utilize "standards" or "benchmarks" to focus instruction and assessments of student learning. The National Standards for Physical Education (NASPE, 2004) provide a framework to guide this process for…

75 FR 45085 - Fisheries in the Western Pacific; Bottomfish and Seamount Groundfish Fisheries; 2010-11 Main...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-02

... would be caught, but because the 2009-10 fishery took less than the TAC, the associated risk of... will be accepted in Microsoft Word or Excel, WordPerfect, or Adobe PDF file formats only. A... other information, and taking into account the associated risk of overfishing. The Deep 7 bottomfish are...

A Trainee Demand Analysis for the Expansion of the Marine Corps Embassy Security Group

DTIC Science & Technology

2013-04-17

FY GIXid$ of serwite (GOS] 2010 3 lOll ~ ,2012 5 2013 X 2014 X ,2015 )t 2016 X 2017 X , 2018 X 2019 X ,1010 X L lntetfaee J oetachme;nt...Walkenbach, J. (2010). Microsoft Excel 2010 bible . Indianapolis, IN: Wiley. Wang, J., Egudo, R., & Galanis, G. (2007, August). Determining training demand

75 FR 26703 - Atlantic Coastal Fisheries Cooperative Management Act Provisions; Weakfish Fishery

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... any one of the following methods: Electronic Submissions: Submit all electronic public comments via... submit attachments to electronic comments in Microsoft Word, Excel, WordPerfect, or Adobe PDF file... the tip of the lower jaw with the mouth closed to the end of the lower tip of the tail) in or from the...

76 FR 32025 - Endangered and Threatened Wildlife and Plants: Proposed Rulemaking To Revise Critical Habitat for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-02

...-BA81 by any one of the following methods: Electronic Submissions: Federal eRulemaking Portal: http... required fields if you wish to remain anonymous). Attachments to electronic comments will be accepted in Microsoft Word, Excel, WordPerfect, or Adobe PDF file formats only. The petition, 90-day finding, 12-month...

78 FR 66675 - Endangered and Threatened Wildlife; 90-Day Finding on a Petition To List Multiple Species of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

... to electronic comments will be accepted in Microsoft Word, Excel, or Adobe PDF file formats only... this document, identified by the code NOAA-NMFS-2013-0150, by any of the following methods: Electronic Submissions: Submit all electronic comments via the Federal eRulemaking Portal. Go to www.regulations.gov...

Active Learning and Threshold Concepts in Multiple Testing That Can Further Develop Student Critical Statistical Thinking

ERIC Educational Resources Information Center

White, Desley

2015-01-01

Two practical activities are described, which aim to support critical thinking about statistics as they concern multiple outcomes testing. Formulae are presented in Microsoft Excel spreadsheets, which are used to calculate the inflation of error associated with the quantity of tests performed. This is followed by a decision-making exercise, where…

78 FR 52032 - Atlantic Highly Migratory Species; 2006 Consolidated Atlantic Highly Migratory Species Fishery...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-21

... may submit attachments to electronic comments in Microsoft Word or Excel, WordPerfect, or Adobe PDF... categories per the percentages outlined in the 2006 Consolidated HMS FMP. In other words, the combined effect... other words, if a vessel is not allowed access to the Cape Hatteras Gear Restricted Area due to the...

Design of single phase inverter using microcontroller assisted by data processing applications software

NASA Astrophysics Data System (ADS)

Ismail, K.; Muharam, A.; Amin; Widodo Budi, S.

2015-12-01

Inverter is widely used for industrial, office, and residential purposes. Inverter supports the development of alternative energy such as solar cells, wind turbines and fuel cells by converting dc voltage to ac voltage. Inverter has been made with a variety of hardware and software combinations, such as the use of pure analog circuit and various types of microcontroller as controller. When using pure analog circuit, modification would be difficult because it will change the entire hardware components. In inverter with microcontroller based design (with software), calculations to generate AC modulation is done in the microcontroller. This increases programming complexity and amount of coding downloaded to the microcontroller chip (capacity flash memory in the microcontroller is limited). This paper discusses the design of a single phase inverter using unipolar modulation of sine wave and triangular wave, which is done outside the microcontroller using data processing software application (Microsoft Excel), result shows that complexity programming was reduce and resolution sampling data is very influence to THD. Resolution sampling must taking ½ A degree to get best THD (15.8%).

Application of numerical method in calculating the internal rate of return of joint venture investment using diminishing musyarakah model

NASA Astrophysics Data System (ADS)

Ruslan, Siti Zaharah Mohd; Jaffar, Maheran Mohd

2017-05-01

Islamic banking in Malaysia offers variety of products based on Islamic principles. One of the concepts is a diminishing musyarakah. The concept of diminishing musyarakah helps Muslims to avoid transaction which are based on riba. The diminishing musyarakah can be defined as an agreement between capital provider and entrepreneurs that enable entrepreneurs to buy equity in instalments where profits and losses are shared based on agreed ratio. The objective of this paper is to determine the internal rate of return (IRR) for a diminishing musyarakah model by applying a numerical method. There are several numerical methods in calculating the IRR such as by using an interpolation method and a trial and error method by using Microsoft Office Excel. In this paper we use a bisection method and secant method as an alternative way in calculating the IRR. It was found that the diminishing musyarakah model can be adapted in managing the performance of joint venture investments. Therefore, this paper will encourage more companies to use the concept of joint venture in managing their investments performance.

Epidemiology of Organophosphate Poisoning in the Tshwane District of South Africa.

PubMed

Razwiedani, L L; Rautenbach, Pgd

2017-01-01

Organophosphate poisoning is a major public health problem in South Africa. Individuals get exposed to organophosphate in both the domestic and industrial spheres. A cross-sectional study was conducted using retrospective, secondary data of organophosphate poisoning cases over a 3-year period, reported at the Tshwane District surveillance office. Data were analysed using Microsoft Excel, and Epi Info version 7 was used for descriptive statistics. A total of 207 cases were reported with ages ranging from 10 months to 59 years. Most of the cases were men (58.9%). Intentional poisoning accounted for 51% of cases. Unintentional poisoning accounted for 21.7% of cases, and 26.5% of cases had unknown circumstances of poisoning. A significant number (50.2%) of intentional poisonings were suicide related. Nonsuicidal cases accounted for 47.4% of cases, and deliberate unlawful poisoning accounted for 2.4% of cases. The mortality rate for the whole group was 3.4%. Improvement in data collection on organophosphate poisoning is essential to properly measure the burden of the problem. More effective regulatory controls for pesticide use are needed in South Africa.

Hematology and Serum Biochemistry Reference Intervals for Six-Week-Old, Farm-Reared Chinese Ring-Necked Pheasants ( Phasianus colchicus ) from Minnesota.

PubMed

Dzikamunhenga, R S; Griffith, R W; Hostetter, S; Fisher, P; Larson, W

2017-06-01

Chinese ring-necked pheasants ( Phasianus colchicus ) are commonly farmed in intensive operations for purposes such as meat production, hunting preserves, or research. Under these conditions, pheasants frequently suffer medical ailments such as bacterial, viral, and parasitic infections or nutritional or metabolic disorders. Relatively little scientific information exists regarding clinical pathology reference intervals (RIs) for farm-reared pheasants. The objective of this study was to determine RIs for hematologic and serum biochemical variables for Chinese ring-necked pheasants from Minnesota at 6 wk of age. Blood samples from 119 clinically healthy Chinese ring-necked pheasants were analyzed using standard techniques. Reference intervals were generated in Microsoft® Excel® 2013 (Microsoft, Redmond, WA) using Reference Value Advisor freeware version 2.1 (Microsoft). Ninety-five percent RIs were determined using nonparametric methods that followed Clinical and Laboratory Standards Institute guidelines. These RIs will be useful for the monitoring of health and diagnosis of disease in confined Chinese ring-necked pheasant populations that are approximately 6 wk old.

SU-E-E-02: An Excel-Based Study Tool for ABR-Style Exams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cline, K; Stanley, D; Defoor, D

2015-06-15

Purpose: As the landscape of learning and testing shifts toward a computer-based environment, a replacement for paper-based methods of studying is desirable. Using Microsoft Excel, a study tool was developed that allows the user to populate multiple-choice questions and then generate an interactive quiz session to answer them. Methods: The code for the tool was written using Microsoft Excel Visual Basic for Applications with the intent that this tool could be implemented by any institution with Excel. The base tool is a template with a setup macro, which builds out the structure based on user’s input. Once the framework ismore » built, the user can input sets of multiple-choice questions, answer choices, and even add figures. The tool can be run in random-question or sequential-question mode for single or multiple courses of study. The interactive session allows the user to select answer choices and immediate feedback is provided. Once the user is finished studying, the tool records the day’s progress by reporting progress statistics useful for trending. Results: Six doctoral students at UTHSCSA have used this tool for the past two months to study for their qualifying exam, which is similar in format and content to the American Board of Radiology (ABR) Therapeutic Part II exam. The students collaborated to create a repository of questions, met weekly to go over these questions, and then used the tool to prepare for their exam. Conclusion: The study tool has provided an effective and efficient way for students to collaborate and be held accountable for exam preparation. The ease of use and familiarity of Excel are important factors for the tool’s use. There are software packages to create similar question banks, but this study tool has no additional cost for those that already have Excel. The study tool will be made openly available.« less

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

PubMed Central

ROSA, Wellington Luiz de Oliveira; SILVA, Tiago Machado; LIMA, Giana da Silveira; SILVA, Adriana Fernandes; PIVA, Evandro

2016-01-01

ABSTRACT Objective A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. Material and Methods This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). Results A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Conclusions Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in countries such as Brazil. PMID:27383712

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review.

PubMed

Rosa, Wellington Luiz de Oliveira; Silva, Tiago Machado; Lima, Giana da Silveira; Silva, Adriana Fernandes; Piva, Evandro

2016-01-01

A systematic review was conducted to analyze Brazilian scientific and technological production related to the dental materials field over the past 50 years. This study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (Prisma) statement. Searches were performed until December 2014 in six databases: MedLine (PubMed), Scopus, LILACS, IBECS, BBO, and the Cochrane Library. Additionally, the Brazilian patent database (INPI - Instituto Nacional de Propriedade Industrial) was screened in order to get an overview of Brazilian technological development in the dental materials field. Two reviewers independently analyzed the documents. Only studies and patents related to dental materials were included in this review. Data regarding the material category, dental specialty, number of documents and patents, filiation countries, and the number of citations were tabulated and analyzed in Microsoft Office Excel (Microsoft Corporation, Redmond, Washington, United States). A total of 115,806 studies and 53 patents were related to dental materials and were included in this review. Brazil had 8% affiliation in studies related to dental materials, and the majority of the papers published were related to dental implants (1,137 papers), synthetic resins (681 papers), dental cements (440 papers), dental alloys (392 papers) and dental adhesives (361 papers). The Brazilian technological development with patented dental materials was smaller than the scientific production. The most patented type of material was dental alloys (11 patents), followed by dental implants (8 patents) and composite resins (7 patents). Dental materials science has had a substantial number of records, demonstrating an important presence in scientific and technological development of dentistry. In addition, it is important to approximate the relationship between academia and industry to expand the technological development in countries such as Brazil.

Virological investigation of hand, foot, and mouth disease in a tertiary care center in South India.

PubMed

Vijayaraghavan, Pavithra M; Chandy, Sara; Selvaraj, Kavitha; Pulimood, Susanne; Abraham, Asha M

2012-07-01

Hand, foot, and mouth disease (HFMD) remains a common problem in India, yet its etiology is largely unknown as diagnosis is based on clinical characteristics. There are very few laboratory-based molecular studies on HFMD outbreaks. The aim of this study was to characterize HFMD-related isolates by molecular techniques. Between 2005 and 2008, during two documented HFMD outbreaks, 30 suspected HFMD cases presented at the Outpatient Unit of the Department of Dermatology, Christian Medical College (CMC), Vellore. Seventy-eight clinical specimens (swabs from throat, mouth, rectum, anus, buttocks, tongue, forearm, sole, and foot) were received from these patients at the Department of Clinical Virology, CMC, for routine diagnosis of hand, foot, and mouth disease. Samples from these patients were cultured in Vero and rhabdomyosarcoma (RD) cell lines. Isolates producing enterovirus-like cytopathogenic effect (CPE) in cell culture were identified by a nested reverse transcription-based polymerase chain reaction (RT-PCR) and sequenced. The nucleotide sequences were analyzed using the BioEdit sequence program. Homology searches were performed using the Basic Local Alignment Search Tool (BLAST) algorithm. The statistical analysis was performed using Epi Info version 6.04b and Microsoft Excel 2002 (Microsoft Office XP). Of the 30 suspected HFMD cases, only 17 (57%) were laboratory confirmed and Coxsackievirus A16 (CVA16) was identified as the etiological agent in all these cases. Coxsackievirus A16 (CVA16) was identified as the virus that caused the HFMD outbreaks in Vellore between 2005 and 2008. Early confirmation of HFMD helps to initiate control measures to interrupt virus transmission. In the laboratory, classical diagnostic methods, culture and serological tests are being replaced by molecular techniques. Routine surveillance systems will help understand the epidemiology of HFMD in India.

An evaluation of knowledge, attitude, and practice of adverse drug reaction reporting among prescribers at a tertiary care hospital.

PubMed

Desai, Chetna K; Iyer, Geetha; Panchal, Jigar; Shah, Samidh; Dikshit, R K

2011-10-01

Spontaneous reporting is an important tool in pharmacovigilance. However, its success depends on cooperative and motivated prescribers. Under-reporting of adverse drug reactions (ADRs) by prescribers is a common problem. The present study was undertaken to evaluate the knowledge, attitude, and practices (KAP) regarding ADR reporting among prescribers at the Civil Hospital, Ahmedabad, to get an insight into the causes of under-reporting of ADRs. A pretested KAP questionnaire comprising of 15 questions (knowledge 6, attitude 5, and practice 4) was administered to 436 prescribers. The questionnaires were assessed for their completeness (maximum score 20) and the type of responses regarding ADR reporting. Microsoft Excel worksheet (Microsoft Office 2007) and Chi-Square test were used for statistical analysis. A total of 260 (61%) prescribers completed the questionnaire (mean score of completion 18.04). The response rate of resident doctors (70.7%) was better than consultants (34.5%) (P < 0.001). ADR reporting was considered important by 97.3% of the respondents; primarily for improving patient safety (28.8%) and identifying new ADRs (24.6%). A majority of the respondents opined that they would like to report serious ADRs (56%). However, only 15% of the prescribers had reported ADRs previously. The reasons cited for this were lack of information on where (70%) and how (68%) to report and the lack of access to reporting forms (49.2%). Preferred methods for reporting were e-mail (56%) and personal communication (42%). The prescribers are aware of the ADRs and the importance of their reporting. However, under reporting and lack of knowledge about the reporting system are clearly evident. Creating awareness about ADR reporting and devising means to make it easy and convenient may aid in improving spontaneous reporting.

Destination Mars Grand Opening

NASA Image and Video Library

2016-09-18

A ceremonial ribbon is cut for the opening of new Destination: Mars experience at the Kennedy Space Center Visitor Complex. From the left are Therrin Protze, chief operating officer of the visitor complex, center director Bob Cabana, Apollo 11 astronaut Buzz Aldrin, Kudo Tsunoda of Microsoft, and Jeff Norris of NASA’s Jet Propulsion Laboratory (JPL) in Pasadena, California. Destination: Mars gives guests an opportunity to “visit” several sites on Mars using real imagery from NASA’s Curiosity Mars Rover. Based on OnSight, a tool created by JPL, the experience brings guests together with a holographic version of Aldrin as they are guided to Mars using Microsoft HoloLens mixed reality headset. Photo credit: NASA/Charles Babir

Investigating Navy Officer Retention Using Data Farming

DTIC Science & Technology

2015-09-01

runs on Microsoft Access . Contractors from SAG Corporation translated the code into Visual Basic for Applications ( VBA ), bringing several benefits...18  b.  Accessions ............................................................. 18  c.  Promotions...Strategic Actions Group SEED Simulation Experiments & Efficient Design URL Unrestricted Line VBA Visual Basic for Applications VV&A Verification

Enhancing Instruction through Constructivism, Cooperative Learning, and Cloud Computing

ERIC Educational Resources Information Center

Denton, David W.

2012-01-01

Cloud computing technologies, such as Google Docs and Microsoft Office Live, have the potential to enhance instructional methods predicated on constructivism and cooperative learning. Cloud-based application features like file sharing and online publishing are prompting departments of education across the nation to adopt these technologies.…

A mobile field-work data collection system for the wireless era of health surveillance.

PubMed

Forsell, Marianne; Sjögren, Petteri; Renard, Matthew; Johansson, Olle

2011-03-01

In many countries or regions the capacity of health care resources is below the needs of the population and new approaches for health surveillance are needed. Innovative projects, utilizing wireless communication technology, contribute to reliable methods for field-work data collection and reporting to databases. The objective was to describe a new version of a wireless IT-support system for field-work data collection and administration. The system requirements were drawn from the design objective and translated to system functions. The system architecture was based on fieldwork experiences and administrative requirements. The Smartphone devices were HTC Touch Diamond2s, while the system was based on a platform with Microsoft .NET components, and a SQL Server 2005 with Microsoft Windows Server 2003 operating system. The user interfaces were based on .NET programming, and Microsoft Windows Mobile operating system. A synchronization module enabled download of field data to the database, via a General Packet Radio Services (GPRS) to a Local Area Network (LAN) interface. The field-workers considered the here-described applications user-friendly and almost self-instructing. The office administrators considered that the back-office interface facilitated retrieval of health reports and invoice distribution. The current IT-support system facilitates short lead times from fieldwork data registration to analysis, and is suitable for various applications. The advantages of wireless technology, and paper-free data administration need to be increasingly emphasized in development programs, in order to facilitate reliable and transparent use of limited resources.

Understanding Solubility through Excel Spreadsheets

NASA Astrophysics Data System (ADS)

Brown, Pamela

2001-02-01

This article describes assignments related to the solubility of inorganic salts that can be given in an introductory general chemistry course. Le Châtelier's principle, solubility, unit conversion, and thermodynamics are tied together to calculate heats of solution by two methods: heats of formation and an application of the van't Hoff equation. These assignments address the need for math, graphing, and computer skills in the chemical technology program by developing skill in the use of Microsoft Excel to prepare spreadsheets and graphs and to perform linear and nonlinear curve-fitting. Background information on the value of understanding and predicting solubility is provided.

A user interface for the Kansas Geological Survey slug test model.

PubMed

Esling, Steven P; Keller, John E

2009-01-01

The Kansas Geological Survey (KGS) developed a semianalytical solution for slug tests that incorporates the effects of partial penetration, anisotropy, and the presence of variable conductivity well skins. The solution can simulate either confined or unconfined conditions. The original model, written in FORTRAN, has a text-based interface with rigid input requirements and limited output options. We re-created the main routine for the KGS model as a Visual Basic macro that runs in most versions of Microsoft Excel and built a simple-to-use Excel spreadsheet interface that automatically displays the graphical results of the test. A comparison of the output from the original FORTRAN code to that of the new Excel spreadsheet version for three cases produced identical results.

Using ArcMap, Google Earth, and Global Positioning Systems to select and locate random households in rural Haiti.

PubMed

Wampler, Peter J; Rediske, Richard R; Molla, Azizur R

2013-01-18

A remote sensing technique was developed which combines a Geographic Information System (GIS); Google Earth, and Microsoft Excel to identify home locations for a random sample of households in rural Haiti. The method was used to select homes for ethnographic and water quality research in a region of rural Haiti located within 9 km of a local hospital and source of health education in Deschapelles, Haiti. The technique does not require access to governmental records or ground based surveys to collect household location data and can be performed in a rapid, cost-effective manner. The random selection of households and the location of these households during field surveys were accomplished using GIS, Google Earth, Microsoft Excel, and handheld Garmin GPSmap 76CSx GPS units. Homes were identified and mapped in Google Earth, exported to ArcMap 10.0, and a random list of homes was generated using Microsoft Excel which was then loaded onto handheld GPS units for field location. The development and use of a remote sensing method was essential to the selection and location of random households. A total of 537 homes initially were mapped and a randomized subset of 96 was identified as potential survey locations. Over 96% of the homes mapped using Google Earth imagery were correctly identified as occupied dwellings. Only 3.6% of the occupants of mapped homes visited declined to be interviewed. 16.4% of the homes visited were not occupied at the time of the visit due to work away from the home or market days. A total of 55 households were located using this method during the 10 days of fieldwork in May and June of 2012. The method used to generate and field locate random homes for surveys and water sampling was an effective means of selecting random households in a rural environment lacking geolocation infrastructure. The success rate for locating households using a handheld GPS was excellent and only rarely was local knowledge required to identify and locate households. This method provides an important technique that can be applied to other developing countries where a randomized study design is needed but infrastructure is lacking to implement more traditional participant selection methods.

A Comparison of Best Fit Lines for Data with Outliers

ERIC Educational Resources Information Center

Glaister, P.

2005-01-01

Three techniques for determining a straight line fit to data are compared. The methods are applied to a range of datasets containing one or more outliers, and to a specific example from the field of chemistry. For the method which is the most resistant to the presence of outliers, a Microsoft Excel spreadsheet, as well as two Matlab routines, are…

78 FR 72622 - Endangered and Threatened Wildlife and Plants; 90-Day Finding on a Petition To List 11 Tarantula...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... attach multiple pieces of information, our preferred format is a spreadsheet in Microsoft Excel. By hard... addresses the petition. Evaluation of Petition The 11 species named in the petition include six species... species is endemic to the southern Western Ghats, in southern India. The species is reported from six...

ALOG: A spreadsheet-based program for generating artificial logs

Treesearch

Matthew F. Winn; Randolph H. Wynne; Philip A. Araman

2004-01-01

Log sawing simulation computer programs can be valuable tools for training sawyers as well as for testing different sawing patterns. Most available simulation programs rely on databases from which to draw logs and can be very costly and time-consuming to develop. ALOG (Artificial LOg Generator) is a Microsoft Excel®-based computer program that was developed to...

Geophysical, geochemical, mineralogical, and enivronmental data for rock samples collected in a mineralized volcanic environment, upper Animas River watershed, Colorado

USGS Publications Warehouse

McCafferty, A.E.; Horton, R.J.; Stanton, M.R.; McDougal, R.R.; Fey, D.L.

2011-01-01

* provide measurements to study the geochemical, mineralogical, and geophysical characteristics of rocks having weak to extreme degrees of alteration and to develop an understanding of how these characteristics change with alteration type. Data are provided in two digital formats: an Arc/Info geodatabase and a Microsoft Excel spreadsheet.

77 FR 67624 - Fisheries of the Northeastern United States; Atlantic Herring Fishery; Adjustment to 2013 Annual...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-13

...). Attachments to electronic comments will be accepted in Microsoft Word or Excel, WordPerfect, or Adobe PDF... accuracy against the scanned image of the paper VTRs submitted by the owner/ operator of the vessel. VTR... combination of recent fishing activity and a review of the scanned images of the original VTR were used to...

Mapping Self-Guided Learners' Searches for Video Tutorials on YouTube

ERIC Educational Resources Information Center

Garrett, Nathan

2016-01-01

While YouTube has a wealth of educational videos, how self-guided learners use these resources has not been fully described. An analysis of search engine queries for help with the use of Microsoft Excel shows that few users search for specific features or functions but instead use very general terms. Because the same videos are returned in…

A Comparison of Video Modeling, Text-Based Instruction, and No Instruction for Creating Multiple Baseline Graphs in Microsoft Excel

ERIC Educational Resources Information Center

Tyner, Bryan C.; Fienup, Daniel M.

2015-01-01

Graphing is socially significant for behavior analysts; however, graphing can be difficult to learn. Video modeling (VM) may be a useful instructional method but lacks evidence for effective teaching of computer skills. A between-groups design compared the effects of VM, text-based instruction, and no instruction on graphing performance.…

A Simple yet Accurate Method for Students to Determine Asteroid Rotation Periods from Fragmented Light Curve Data

ERIC Educational Resources Information Center

Beare, R. A.

2008-01-01

Professional astronomers use specialized software not normally available to students to determine the rotation periods of asteroids from fragmented light curve data. This paper describes a simple yet accurate method based on Microsoft Excel[R] that enables students to find periods in asteroid light curve and other discontinuous time series data of…

Development of a spreadsheet for SNPs typing using Microsoft EXCEL.

PubMed

Hashiyada, Masaki; Itakura, Yukio; Takahashi, Shirushi; Sakai, Jun; Funayama, Masato

2009-04-01

Single-nucleotide polymorphisms (SNPs) have some characteristics that make them very appropriate for forensic studies and applications. In our institute, SNPs typings were performed by the TaqMan SNP Genotyping Assays using the ABI PRISM 7500 FAST Real-Time PCR System (AppliedBiosystems) and Sequence Detection Software ver.1.4 (AppliedBiosystem). The TaqMan method was desired two positive control (Allele1 and 2) and one negative control to analyze each SNP locus. Therefore, it can be analyzed up to 24 loci of a person on a 96-well-plate at the same time. If SNPs analysis is expected to apply to biometrics authentication, 48 and over loci are required to identify a person. In this study, we designed a spreadsheet package using Microsoft EXCEL, and population data were used from our 120 SNPs population studies. On the spreadsheet, we defined SNP types using 'template files' instead of positive and negative controls. "Template files" consisted of the results of 94 unknown samples and two negative controls of each of 120 SNPs loci we had previously studied. By the use of the files, the spreadsheet could analyze 96 SNPs on a 96-wells-plate simultaneously.

Validity of the Microsoft Kinect for assessment of postural control.

PubMed

Clark, Ross A; Pua, Yong-Hao; Fortin, Karine; Ritchie, Callan; Webster, Kate E; Denehy, Linda; Bryant, Adam L

2012-07-01

Clinically feasible methods of assessing postural control such as timed standing balance and functional reach tests provide important information, however, they cannot accurately quantify specific postural control mechanisms. The Microsoft Kinect™ system provides real-time anatomical landmark position data in three dimensions (3D), and given that it is inexpensive, portable and simple to setup it may bridge this gap. This study assessed the concurrent validity of the Microsoft Kinect™ against a benchmark reference, a multiple-camera 3D motion analysis system, in 20 healthy subjects during three postural control tests: (i) forward reach, (ii) lateral reach, and (iii) single-leg eyes-closed standing balance. For the reach tests, the outcome measures consisted of distance reached and trunk flexion angle in the sagittal (forward reach) and coronal (lateral reach) planes. For the standing balance test the range and deviation of movement in the anatomical landmark positions for the sternum, pelvis, knee and ankle and the lateral and anterior trunk flexion angle were assessed. The Microsoft Kinect™ and 3D motion analysis systems had comparable inter-trial reliability (ICC difference=0.06±0.05; range, 0.00-0.16) and excellent concurrent validity, with Pearson's r-values >0.90 for the majority of measurements (r=0.96±0.04; range, 0.84-0.99). However, ordinary least products analyses demonstrated proportional biases for some outcome measures associated with the pelvis and sternum. These findings suggest that the Microsoft Kinect™ can validly assess kinematic strategies of postural control. Given the potential benefits it could therefore become a useful tool for assessing postural control in the clinical setting. Copyright © 2012 Elsevier B.V. All rights reserved.

Development of an Electronic Role-Play Assessment Initiative in Bioscience for Nursing Students

ERIC Educational Resources Information Center

Craft, Judy; Ainscough, Louise

2015-01-01

Devising authentic assessments for subjects with large enrolments is a challenge. This study describes an electronic role-play assessment for approximately 600 first-year nursing students to learn and apply pathophysiology (bioscience) concepts to nursing practice. Students used Microsoft Office PowerPoint[R] to prepare electronic role-plays both…

Investigating Uses and Perceptions of an Online Collaborative Workspace for the Dissertation Process

ERIC Educational Resources Information Center

Rockinson-Szapkiw, Amanda J.

2012-01-01

The intent of this study was to investigate 93 doctoral candidates' perceptions and use of an online collaboration workspace and content management server, Microsoft Office SharePoint, for dissertation process. All candidates were enrolled in an Ed.D. programme in the United States. Descriptive statistics demonstrate that candidates frequently use…

Cloud Computing E-Communication Services in the University Environment

ERIC Educational Resources Information Center

Babin, Ron; Halilovic, Branka

2017-01-01

The use of cloud computing services has grown dramatically in post-secondary institutions in the last decade. In particular, universities have been attracted to the low-cost and flexibility of acquiring cloud software services from Google, Microsoft and others, to implement e-mail, calendar and document management and other basic office software.…

76 FR 43679 - Filing via the Internet; Notice of Additional File Formats for efiling

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM07-16-000] Filing via the Internet; Notice of Additional File Formats for efiling Take notice that the Commission has added to its list of acceptable file formats the four-character file extensions for Microsoft Office 2007/2010...

Teach Graphic Design Basics with PowerPoint

ERIC Educational Resources Information Center

Lazaros, Edward J.; Spotts, Thomas H.

2007-01-01

While PowerPoint is generally regarded as simply software for creating slide presentations, it includes often overlooked--but powerful--drawing tools. Because it is part of the Microsoft Office package, PowerPoint comes preloaded on many computers and thus is already available in many classrooms. Since most computers are not preloaded with good…

Put Power into Your Presentations: Using Presentation Software Effectively

ERIC Educational Resources Information Center

Safransky, Robert J.; Burmeister, Marsha L.

2009-01-01

Microsoft PowerPoint, Apple Keynote, and OpenOffice Impress are relatively common tools in the classroom and in the boardroom these days. What makes presentation software so popular? As the Chinese proverb declares, a picture is worth a thousand words. People like visual presentations. Presentation software can make even a dull subject come to…

The Role of Interest and Images in Slideware Presentations

ERIC Educational Resources Information Center

Tangen, Jason M.; Constable, Merryn D.; Durrant, Eric; Teeter, Chris; Beston, Brett R.; Kim, Joseph A.

2011-01-01

With the advent of technologies that allow lecturers to develop presentations using software such as Microsoft PowerPoint, Apple Keynote, and OpenOffice Impress (referred to generically here as "slideware"), lectures and meetings are beginning to resemble cinematic experiences rather than the text filled transactions that have been the norm for…

Learning Technology Skills through Social Entrepreneurialism

ERIC Educational Resources Information Center

Pendleton, Jean

2009-01-01

When the author first arrived at Charleston Collegiate School, she was handed a college-level Microsoft business applications textbook and told she'd be teaching a one-semester ninth grade technology course. Since the course had never been taught before, she was given little more direction than: "Teach them Office and anything else you think they…

Teaching Computer Skills to Beginners: What and How?

ERIC Educational Resources Information Center

Dunsworth, Qi; Martin, Florence; Igoe, Ann

2004-01-01

This report describes an evaluation of Computer Literacy, which is an undergraduate general studies course, offered by College of Education at a large southwestern university. The purpose of this course is to provide knowledge about computer and computing, and application skills in using Microsoft Office software. The course is coordinated by a…

What Web 2.0 Can Teach Us about Learning

ERIC Educational Resources Information Center

Maloney, Edward J.

2007-01-01

The past 15 years have seen a significant increase in the use of technology in higher education. In fact, professors now find it difficult to imagine teaching without the Internet, course-management systems, Microsoft Office, e-mail, and other technological applications. Course-management systems allow faculty members to deliver materials to their…

Strain Analysis of Stretched Tourmaline Crystals Using ImageJ, Microsoft Excel and PowerPoint

NASA Astrophysics Data System (ADS)

Bosbyshell, H.

2012-12-01

This poster describes an undergraduate structural geology lab exercise utilizing the Mohr's circle diagram for finite strain, constructed using measurements obtained from stretched tourmaline crystals. A small building housing HVAC equipment at the south end of West Chester University's Recitation Hall (itself made of serpentinite) is constructed of early-Cambrian Chickies Quartzite. Stretched tourmaline crystals, with segments joined by fibrous quartz, are visible on many surfaces (presumably originally bedding). While the original orientation of any stone is unknown, these rocks provide an opportunity for a short field exercise during a two-hour lab period and a great base for conducting strain analysis. It is always fun to ask how many in the class have ever noticed the tourmaline (few have). Students take photos using their cell phones or cameras. Since strain is a ratio the absolute size of the tourmaline crystals is immaterial. Nonetheless, this is a good opportunity to remind students of the importance of including a scale in their photographs. The photos are opened in ImageJ and the line tool is used to determine the original and final lengths of selected crystals. Students calculate strain parameters using Microsoft Excel. Then, we use Adobe Illustrator or the drafting capabilities of Microsoft PowerPoint 2010 to follow Ramsay and Huber's techniques using a Mohr's circle construction to determine the finite strain ellipse. If a stretching direction can be estimated, elongation of two crystals is all that is required to determine the strain ratio. If no stretching direction is apparent, three crystals are required for a more complicated analysis that allows for determination of the stretching direction, as well as the strain ratio.

Three-dimensional assessment of squats and drop jumps using the Microsoft Xbox One Kinect: Reliability and validity.

PubMed

Mentiplay, Benjamin F; Hasanki, Ksaniel; Perraton, Luke G; Pua, Yong-Hao; Charlton, Paula C; Clark, Ross A

2018-03-01

The Microsoft Xbox One Kinect™ (Kinect V2) contains a depth camera that can be used to manually identify anatomical landmark positions in three-dimensions independent of the standard skeletal tracking, and therefore has potential for low-cost, time-efficient three-dimensional movement analysis (3DMA). This study examined inter-session reliability and concurrent validity of the Kinect V2 for the assessment of coronal and sagittal plane kinematics for the trunk, hip and knee during single leg squats (SLS) and drop vertical jumps (DVJ). Thirty young, healthy participants (age = 23 ± 5yrs, male/female = 15/15) performed a SLS and DVJ protocol that was recorded concurrently by the Kinect V2 and 3DMA during two sessions, one week apart. The Kinect V2 demonstrated good to excellent reliability for all SLS and DVJ variables (ICC ≥ 0.73). Concurrent validity ranged from poor to excellent (ICC = 0.02 to 0.98) during the SLS task, although trunk, hip and knee flexion and two-dimensional measures of knee abduction and frontal plane projection angle all demonstrated good to excellent validity (ICC ≥ 0.80). Concurrent validity for the DVJ task was typically worse, with only two variables exceeding ICC = 0.75 (trunk and hip flexion). These findings indicate that the Kinect V2 may have potential for large-scale screening for ACL injury risk, however future prospective research is required.

New Title Tweets: Using Twitter and Microsoft Excel to Broadcast New Title Lists

ERIC Educational Resources Information Center

Rodzvilla, John

2010-01-01

Today's library should be part of the online social networks so it can connect with patrons and inform them of new services and opportunities. But this need to utilize new technology must be balanced against shrinking budgets and increased costs. One way libraries can juggle these demands is to spend more time on creating content, using a mix of…

Using microsoft excel applications in the graduate intern program at Goddard Space Flight Center. M.S. Thesis

NASA Technical Reports Server (NTRS)

Antoine, Lisa

1992-01-01

An outline of the Project Operations Branch at Goddard Space Flight Center is presented that describes the management of the division and each subgroup's responsibility. The paper further describes the development of software tools for the Macintosh personal computer, and their impending implementation. A detailed step by step procedure is given for using these software tools.

Summary of Seepage Investigations in the Yakima River Basin, Washington

USGS Publications Warehouse

Magirl, C.S.; Julich, R.J.; Welch, W.B.; Curran, C.R.; Mastin, M.C.; Vaccaro, J.J.

2009-01-01

Discharge data collected by the U.S. Geological Survey, Washington State Department of Ecology, and Yakama Nation for seepage investigations in the Yakima River basin are made available as downloadable Microsoft Excel files. These data were collected for more than a century at various times for several different studies and are now available in one location to facilitate future analysis by interested parties.

National High School Center Early Warning System Tool v2.0: Technical Manual

ERIC Educational Resources Information Center

National High School Center, 2011

2011-01-01

The Early Warning System (EWS) Tool v2.0 is a Microsoft Excel-based tool developed by the National High School Center at the American Institutes for Research in collaboration with Matrix Knowledge Group. The tool enables schools, districts, and states to identify students who may be at risk of dropping out of high school and to monitor these…

Using Correlational and Prediction Data to Enhance Student Achievement in K-12 Schools: A Practical Application for School Counselors

ERIC Educational Resources Information Center

Ware, William B.; Galassi, John P.

2006-01-01

Correlational data and regression analysis provide the school counselor with a method to describe growth in achievement test scores from elementary to high school. Using Microsoft Excel, this article shows the reader in a step-by-step manner how to describe this growth pattern and how to evaluate interventions that attempt to enhance achievement…

WASP (Write a Scientific Paper) using Excel -5: Quartiles and standard deviation.

PubMed

Grech, Victor

2018-03-01

The almost inevitable descriptive statistics exercise that is undergone once data collection is complete, prior to inferential statistics, requires the acquisition of basic descriptors which may include standard deviation and quartiles. This paper provides pointers as to how to do this in Microsoft Excel™ and explains the relationship between the two. Copyright © 2018 Elsevier B.V. All rights reserved.

SouthPro : a computer program for managing uneven-aged loblolly pine stands

Treesearch

Benedict Schulte; Joseph Buongiorno; Ching-Rong Lin; Kenneth E. Skog

1998-01-01

SouthPro is a Microsoft Excel add-in program that simulates the management, growth, and yield of uneven-aged loblolly pine stands in the Southern United States. The built-in growth model of this program was calibrated from 991 uneven-aged plots in seven states, covering most growing conditions and sites. Stands are described by the number of trees in 13 size classes...

Parametric (On-Design) Cycle Analysis for a Separate-Exhaust Turbofan Engine With Interstage Turbine Burner

NASA Technical Reports Server (NTRS)

Liew, K. H.; Urip, E.; Yang, S. L.; Siow, Y. K.; Marek, C. J.

2005-01-01

Today s modern aircraft is based on air-breathing jet propulsion systems, which use moving fluids as substances to transform energy carried by the fluids into power. Throughout aero-vehicle evolution, improvements have been made to the engine efficiency and pollutants reduction. The major advantages associated with the addition of ITB are an increase in thermal efficiency and reduction in NOx emission. Lower temperature peak in the main combustor results in lower thermal NOx emission and lower amount of cooling air required. This study focuses on a parametric (on-design) cycle analysis of a dual-spool, separate-flow turbofan engine with an Interstage Turbine Burner (ITB). The ITB considered in this paper is a relatively new concept in modern jet engine propulsion. The ITB serves as a secondary combustor and is located between the high- and the low-pressure turbine, i.e., the transition duct. The objective of this study is to use design parameters, such as flight Mach number, compressor pressure ratio, fan pressure ratio, fan bypass ratio, and high-pressure turbine inlet temperature to obtain engine performance parameters, such as specific thrust and thrust specific fuel consumption. Results of this study can provide guidance in identifying the performance characteristics of various engine components, which can then be used to develop, analyze, integrate, and optimize the system performance of turbofan engines with an ITB. Visual Basic program, Microsoft Excel macrocode, and Microsoft Excel neuron code are used to facilitate Microsoft Excel software to plot engine performance versus engine design parameters. This program computes and plots the data sequentially without forcing users to open other types of plotting programs. A user s manual on how to use the program is also included in this report. Furthermore, this stand-alone program is written in conjunction with an off-design program which is an extension of this study. The computed result of a selected design-point engine will be exported to an engine reference data file that is required in off-design calculation.

[Establishment and management of electronic appointment library for dental implant patients].

PubMed

Dong, Zheng-jie; Xu, Kan

2013-10-01

To design an excel form which can prompt dental implant patient appointment through color change, which can scientifically manage implant EMR library through appropriate interlinkage and number. An excel form based on operating system Windows XP was designed and software 2003 Microsoft excel was used, which was configured to change color with the passage of time by the use of command "conditional format". An excel form was designed. The color turned to red automatically on the day the patient underwent implant surgery. It turned to yellow when the patient recalled 2 weeks after the first operation, to green when the patient underwent secondary operation. It was designed to be gray when all the procedures of implant restoration was finished. In addition, we could know patients' main implant situation through directly opening his EMR when clicking on his name or number. Dentists can remind the implant patient appointment schedule through color change of an excel form, and can consult the implant patient EMR directly through interlinkage or number.

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel: III. Convolution and deconvolution.

PubMed

Langenbucher, Frieder

2003-11-01

Convolution and deconvolution are the classical in-vitro-in-vivo correlation tools to describe the relationship between input and weighting/response in a linear system, where input represents the drug release in vitro, weighting/response any body response in vivo. While functional treatment, e.g. in terms of polyexponential or Weibull distribution, is more appropriate for general survey or prediction, numerical algorithms are useful for treating actual experimental data. Deconvolution is not considered an algorithm by its own, but the inversion of a corresponding convolution. MS Excel is shown to be a useful tool for all these applications.

Truke, a web tool to check for and handle excel misidentified gene symbols.

PubMed

Mallona, Izaskun; Peinado, Miguel A

2017-03-21

Genomic datasets accompanying scientific publications show a surprisingly high rate of gene name corruption. This error is generated when files and tables are imported into Microsoft Excel and certain gene symbols are automatically converted into dates. We have developed Truke, a fexible Web tool to detect, tag and fix, if possible, such misconversions. Aside, Truke is language and regional locale-aware, providing file format customization (decimal symbol, field sepator, etc.) following user's preferences. Truke is a data format conversion tool with a unique corrupted gene symbol detection utility. Truke is freely available without registration at http://maplab.cat/truke .

Summary of Expansions, Updates, and Results in GREET 2017 Suite of Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Michael; Elgowainy, Amgad; Han, Jeongwoo

This report provides a technical summary of the expansions and updates to the 2017 release of Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET®) model, including references and links to key technical documents related to these expansions and updates. The GREET 2017 release includes an updated version of the GREET1 (the fuel-cycle GREET model) and GREET2 (the vehicle-cycle GREET model), both in the Microsoft Excel platform and in the GREET.net modeling platform. Figure 1 shows the structure of the GREET Excel modeling platform. The .net platform integrates all GREET modules together seamlessly.

Using ArcGIS software in the pre-hospital emergency medical system.

PubMed

Manole, M; Duma, Odetta; Custură, Maria Alexandra; Petrariu, F D; Manole, Alina

2014-01-01

To measure the accessibility to healtcare services in order to reveal their quality and to improve the overall coverage, continuity and other features. We used the software ESRI Arc GIS 9.3, the Network Analyst function and data provided by Ambulance Service of Iasi (A.S.I.) with emergencies statistics for the first four months of 2012, processed by Microsoft Office Excel 2010. As examples, we chose "St. Maria" Children's Emergency Hospital and "St. Spiridon" Emergency Hospital. ArcGIS Network Analyst finds the best route to get from one location to another or a route that includes multiple locations. Each route is characterized by three stops. The starting point is always the office of Ambulance Service of Iasi (A.S.I.), a second stop at the case address and the third to the hospital unit chosen according to the patient's diagnosis and age. Spatial distribution of emergency cases for the first four months of 2012 in these two examples is one unequable, with higher concentrations in districts located in two areas of the city. The presented examples highlight the poor coverage of healthcare services for the population of Iasi, Romania, especially the South-West area and its vulnerability in situations of emergency. Implementing such a broad project would lead to more complex analyses that would improve the situation of pre-hospital emergency medical services, with final goal to deserve the population, improve the quality of healthcare and develop the interdisciplinary relationships.

Software Intensive Systems

DTIC Science & Technology

2006-07-01

Architect, Developer and Platform Evangelism • Microsoft Dynamic Systems Initiative-- John Wilson, Architect Windows Management • Windows Lifecycle...Presentations • Aegis--Reuben Pitts & CDR John Ailes, Program Executive Office, Integrated Warfare Systems • Long Term Mine Reconnaissance (LMRS)--CAPT...Paul Imes • Joint Tactical Radio System (JTRS)--Richard North, JPEO JTRS & Leonard Schiavone , MITRE • Single Integrated Air Picture (SIAP)--CAPT

Using Health Data - Applying Technology to Work Smarter Grain Heather Proctor Paula Using Health Data - Applying Technology to Work Smarter 276 + CD Elsevier 9780729538893 0729538893 [Formula: see text].

PubMed

2010-05-26

The title gives the impression that this book will be about the collection and analysis of healthcare data, but its actual focus is how to use the Microsoft Office 2007 suite of programs in the healthcare setting.

Using health data: applying technology to work smarter Heather Grain Paula Procter Elsevier Using health data: applying technology to work smarter £20.99 276pp 9780729538893 0729538893 [Formula: see text].

PubMed

2010-10-07

THE TITLE of this book may give the impression that it concerns the collection and analysis of healthcare data, but it is actually about how to use Microsoft office 2007 software in healthcare settings.

Effectiveness of an Online Automated Evaluation and Feedback System in an Introductory Computer Literacy Course

ERIC Educational Resources Information Center

Varank, Ilhan; Erkoç, M. Fatih; Büyükimdat, Meryem Köskeroglu; Aktas, Mehmet; Yeni, Sabiha; Adigüzel, Tufan; Cömert, Zafer; Esgin, Esad

2014-01-01

The purpose of this study was to investigate the effectiveness of an online automated evaluation and feedback system that assessed students' word processing assignments prepared with Microsoft Office Word. The participants of the study were 119 undergraduate teacher education students, 86 of whom were female and 32 were male, enrolled in different…

Tools for Teaching Cognitive Psychology: Using Public Service Announcements for Education on Environmental Sustainability

ERIC Educational Resources Information Center

Hager, Lisa D.

2011-01-01

To understand the relevance of cognitive psychology, students in a cognitive psychology course were required to complete a detailed plan for a public service announcement focusing on environmental issues. The final exam was a Microsoft Office PowerPoint presentation incorporating at least eight concepts from the course. Students in the course…

The Impact of Computer-Based Instruction on the Development of EFL Learners' Writing Skills

ERIC Educational Resources Information Center

Zaini, A.; Mazdayasna, G.

2015-01-01

The current study investigated the application and effectiveness of computer assisted language learning (CALL) in teaching academic writing to Iranian EFL (English as a Foreign Language) learners by means of Microsoft Word Office. To this end, 44 sophomore intermediate university students majoring in English Language and Literature at an Iranian…

NaturalReader: A New Generation Text Reader

ERIC Educational Resources Information Center

Flood, Jacqueline

2007-01-01

NaturalReader (http://www.naturalreaders.com/) is a new generation text reader, which means that it reads any machine readable text using synthesized speech without having to copy and paste the selected text into the NaturalReader application window. It installs a toolbar directly into all of the Microsoft Office[TM] programs and uses a mini-board…

A Trainee Demand Analysis for the Expansion of the Marine Corps Embassy Security Group

DTIC Science & Technology

2013-03-01

156 163 )l 2014 )l )l 163 180 )l 2015 )l X 18{1 195 X 2016 )l X 195 210 X 2017 )l X .210 210 X 2018 1t )l 210 210 )l 2019 )l )l 110 210 )l 2010...website: http://www.mcesg.marines.mil/About/MCESGMission Walkenbach, J. (2010). Microsoft Excel 2010 bible . Indianapolis, IN: Wiley Wang, J., Egudo, R

WestPro: a computer program for simulating uneven-aged Douglas-fir stand growth and yield in the Pacific Northwest.

Treesearch

Rebecca Ralston; Joseph Buongiorno; Benedict Schulte; Jeremy Fried

2003-01-01

WestPro is an add-in program designed to work with Microsoft Excel to simulate the growth of uneven-aged Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) stands in the Pacific Northwest region of the United States. Given the initial stand state, defined as the number of softwood and hardwood trees per acre by diameter class, WestPro predicts the...

CalPro: a spreadsheet program for the management of California mixed-conifer stands.

Treesearch

Jingjing Liang; Joseph Buongiorno; Robert A. Monserud

2004-01-01

CalPro is an add-in program developed to work with Microsoft Excel to simulate the growth and management of uneven-aged mixed-conifer stands in California. Its built-in growth model was calibrated from 177 uneven-aged plots on industry and other private lands. Stands are described by the number of trees per acre in each of nineteen 2-inch diameter classes in...

Preliminary In-Flight Loads Analysis of In-Line Launch Vehicles using the VLOADS 1.4 Program

NASA Technical Reports Server (NTRS)

Graham, J. B.; Luz, P. L.

1998-01-01

To calculate structural loads of in-line launch vehicles for preliminary design, a very useful computer program is VLOADS 1.4. This software may also be used to calculate structural loads for upper stages and planetary transfer vehicles. Launch vehicle inputs such as aerodynamic coefficients, mass properties, propellants, engine thrusts, and performance data are compiled and analyzed by VLOADS to produce distributed shear loads, bending moments, axial forces, and vehicle line loads as a function of X-station along the vehicle's length. Interface loads, if any, and translational accelerations are also computed. The major strength of the software is that it enables quick turnaround analysis of structural loads for launch vehicles during the preliminary design stage of its development. This represents a significant improvement over the alternative-the time-consuming, and expensive chore of developing finite element models. VLOADS was developed as a Visual BASIC macro in a Microsoft Excel 5.0 work book on a Macintosh. VLOADS has also been implemented on a PC computer using Microsoft Excel 7.0a for Windows 95. VLOADS was developed in 1996, and the current version was released to COSMIC, NASA's Software Technology Transfer Center, in 1997. The program is a copyrighted work with all copyright vested in NASA.

Adding glycaemic index and glycaemic load functionality to DietPLUS, a Malaysian food composition database and diet intake calculator.

PubMed

Shyam, Sangeetha; Wai, Tony Ng Kock; Arshad, Fatimah

2012-01-01

This paper outlines the methodology to add glycaemic index (GI) and glycaemic load (GL) functionality to food DietPLUS, a Microsoft Excel-based Malaysian food composition database and diet intake calculator. Locally determined GI values and published international GI databases were used as the source of GI values. Previously published methodology for GI value assignment was modified to add GI and GL calculators to the database. Two popular local low GI foods were added to the DietPLUS database, bringing up the total number of foods in the database to 838 foods. Overall, in relation to the 539 major carbohydrate foods in the Malaysian Food Composition Database, 243 (45%) food items had local Malaysian values or were directly matched to International GI database and another 180 (33%) of the foods were linked to closely-related foods in the GI databases used. The mean ± SD dietary GI and GL of the dietary intake of 63 women with previous gestational diabetes mellitus, calculated using DietPLUS version3 were, 62 ± 6 and 142 ± 45, respectively. These values were comparable to those reported from other local studies. DietPLUS version3, a simple Microsoft Excel-based programme aids calculation of diet GI and GL for Malaysian diets based on food records.

A Comparison of Four Software Programs for Implementing Decision Analytic Cost-Effectiveness Models.

PubMed

Hollman, Chase; Paulden, Mike; Pechlivanoglou, Petros; McCabe, Christopher

2017-08-01

The volume and technical complexity of both academic and commercial research using decision analytic modelling has increased rapidly over the last two decades. The range of software programs used for their implementation has also increased, but it remains true that a small number of programs account for the vast majority of cost-effectiveness modelling work. We report a comparison of four software programs: TreeAge Pro, Microsoft Excel, R and MATLAB. Our focus is on software commonly used for building Markov models and decision trees to conduct cohort simulations, given their predominance in the published literature around cost-effectiveness modelling. Our comparison uses three qualitative criteria as proposed by Eddy et al.: "transparency and validation", "learning curve" and "capability". In addition, we introduce the quantitative criterion of processing speed. We also consider the cost of each program to academic users and commercial users. We rank the programs based on each of these criteria. We find that, whilst Microsoft Excel and TreeAge Pro are good programs for educational purposes and for producing the types of analyses typically required by health technology assessment agencies, the efficiency and transparency advantages of programming languages such as MATLAB and R become increasingly valuable when more complex analyses are required.

Geologic field notes and geochemical analyses of outcrop and drill core from Mesoproterozoic rocks and iron-oxide deposits and prospects of southeast Missouri

USGS Publications Warehouse

Day, Warren C.; Granitto, Matthew

2014-01-01

The U.S. Geological Survey, in cooperation with the Missouri Department of Natural Resources/Missouri Geological Survey, undertook a study from 1988 to 1994 on the iron-oxide deposits and their host Mesoproterozoic igneous rocks in southeastern Missouri. The project resulted in an improvement of our understanding of the geologic setting, mode of formation, and the composition of many of the known deposits and prospects and the associated rocks of the St. Francois terrane in Missouri. The goal for this earlier work was to allow the comparison of Missouri iron-oxide deposits in context with other iron oxide-copper ± uranium (IOCG) types of mineral deposits observed globally. The raw geochemical analyses were released originally through the USGS National Geochemical Database (NGDB, http://mrdata.usgs.gov). The data presented herein offers all of the field notes, locations, rock descriptions, and geochemical analyses in a coherent package to facilitate new research efforts in IOCG deposit types. The data are provided in both Microsoft Excel (Version Office 2010) spreadsheet format (*.xlsx) and MS-DOS text formats (*.txt) for ease of use by numerous computer programs.

Fluctuations in Conjunction Miss Distance Projections as Time Approaches Time of Closest Approach

NASA Technical Reports Server (NTRS)

Christian, John A., III

2005-01-01

A responsibility of the Trajectory Operations Officer is to ensure that the International Space Station (ISS) avoids colliding with debris. United States Space Command (USSPACECOM) tracks and catalogs a portion of the debris in Earth orbit, but only objects with a perigee less than 600 km and a radar cross section (RCS) greater than 10 cm-objects that, in fact, represent only a small fraction of the objects in Earth orbit. To accommodate for this, the ISS uses shielding to protect against collisions with smaller objects. This study provides a better understanding of how quickly, and to what degree, USSPACECOM projections tend to converge to the final, true miss distance. The information included is formulated to better predict the behavior of miss distance data during real-time operations. It was determined that the driving components, in order of impact on miss distance fluctuations, are energy dissipation rate (EDR), RCS, and inclination. Data used in this analysis, calculations made, and conclusions drawn are stored in Microsoft Excel log sheets. A separate log sheet, created for each conjunction, contains information such as predicted miss distances, apogee and perigee of debris orbit, EDR, RCS, inclination, tracks and observations, statistical data, and other evaluation/orbital parameters.

Intelligent Diagnostic Assistant for Complicated Skin Diseases through C5's Algorithm.

PubMed

Jeddi, Fatemeh Rangraz; Arabfard, Masoud; Kermany, Zahra Arab

2017-09-01

Intelligent Diagnostic Assistant can be used for complicated diagnosis of skin diseases, which are among the most common causes of disability. The aim of this study was to design and implement a computerized intelligent diagnostic assistant for complicated skin diseases through C5's Algorithm. An applied-developmental study was done in 2015. Knowledge base was developed based on interviews with dermatologists through questionnaires and checklists. Knowledge representation was obtained from the train data in the database using Excel Microsoft Office. Clementine Software and C5's Algorithms were applied to draw the decision tree. Analysis of test accuracy was performed based on rules extracted using inference chains. The rules extracted from the decision tree were entered into the CLIPS programming environment and the intelligent diagnostic assistant was designed then. The rules were defined using forward chaining inference technique and were entered into Clips programming environment as RULE. The accuracy and error rates obtained in the training phase from the decision tree were 99.56% and 0.44%, respectively. The accuracy of the decision tree was 98% and the error was 2% in the test phase. Intelligent diagnostic assistant can be used as a reliable system with high accuracy, sensitivity, specificity, and agreement.

Perinatal statistics of a 15-year period in the Central Region of Saudi Arabia.

PubMed

Sobaih, Badr H; Al-Shebly, Mashael M

2013-01-01

Perinatal statistics are one of the most essential outcome indicators used by many developed countries in order to evaluate perinatal services provided to newborns. In this retrospective study, we collected 15 years of perinatal data at King Khalid University Hospital in Riyadh, Saudi Arabia in order to determine stillbirth and other mortality rates in our institute and compare them with international figures. A total of 58,073 babies were evaluated. Data were collected from maternal and neonatal registry books and from perinatal mortality and morbidity meeting reports between 1994 and 2008. Data were entered and analyzed using Microsoft Office Excel 2007. The stillbirth rate was 11.7/1000, early neonatal death rate was 3.4/1000, perinatal mortality rate (PMR) was 14.9/1000, and corrected PMR was 11.9/1000. Our rates were not significantly different from those of North American and European ones. We noticed a dramatic reduction in the corrected PMR in the last 3 years of the study because of greater advancement in perinatal and neonatal care. Our mortality rates were comparable to the North American and European rates which may reflect the quality of perinatal care provided in our institute.

Factors related to the perceived stigmatization of people living with HIV.

PubMed

Caliari, Juliano de Souza; Teles, Sheila Araujo; Reis, Renata Karina; Gir, Elucir

2017-10-09

Analyzing the factors related to perceived stigmatization of people living with HIV. A cross-sectional study conducted from September of 2014 to December 2015 with users from a specialized service in Minas Gerais. Data were collected through individual instrument application, organized in Microsoft Office Excel(r) 2010 spreadsheets and processed on IBM(r) SPSS 23.0. Descriptive statistics and multiple linear regression method were used for data analysis, adopting statistical significance set at 5.0% (p≤0.05). The study development met research ethics standards. 258 users participated in the study. Most were males between 40 and 49 years of age, single, with low educational level and income. Being between 40 and 49 years of age and having been hospitalized for complications related to HIV were positively associated predictors to increased stigmatization; while not having comorbidities and not being aware of exposure to HIV were predictors associated to reduced stigmatization. Given these results, we highlight that stigmatization can have an impact on the lives of people living with HIV, strengthening their feelings of guilt and shame, which can lead to depression, social isolation and abandoning treatment and clinical follow-up.

A retrospective study of root canal therapy in non-vital primary molars.

PubMed

Stallaert, K M; Sigal, M J; Titley, K C; Andrews, P B

2016-12-01

This study was performed to assess the clinical and radiographic success rates of a formocresol and zinc oxide eugenol (ZOE) primary molar root canal therapy (RCT) technique. The effects of this treatment on the permanent successors and on exfoliation times were also investigated. Study design: the retrospective study included 161 patients with 211 primary molars treated by RCT by a single operator in a private paediatric dental office in the Toronto area. Data were coded and entered into a Microsoft Excel database and analysis undertaken using SPSS software. Predominantly non-parametric tests were used to evaluate statistical differences (p < 0.05). A clinical success rate of 90% (190/211) and a radiographic success rate of 77.3% (136/176) were obtained. Following RCT in a primary molar, enamel defects were found in 6.8% (7/103) of premolars, all of which occurred in first premolars, and in patients treated at a mean age of 54.1 months (p < 0.005). Treated molars exfoliated on average 7.6 months sooner than contralateral teeth (p < 0.005). This formocresol and ZOE RCT is a viable treatment for necrotic primary molars and yielded very high clinical and acceptable radiographic success rates.

ACUTE FLACCID PARALYSIS SURVEILLANCE: A 5 YEARS STUDY OF BANNU, PAKISTAN.

PubMed

Faheem, Muhammad Umer; Haroon, Muhammad Zeeshan; Khan, Aftab Alam; Shaukat, Maryum; Anwar, Sved Abbas

2015-01-01

Acute flaccid paralysis (AFP) is clinical presentation marked by acute onset of weakness and reduced tone. Aetiologies of AFP are diverse including infectious agents, trauma or autoimmune reaction. Currently only three countries in the world that are Nigeria, Pakistan and Afghanistan have endemic poliomyelitis. Pakistan's polio crisis represents one of the last hurdles in a 23-year campaign run by the World Health Organization. Bannu due to its geographical location stands out to be one of highest risk areas for Poliomyelitis. The objective of this study was to determine frequency of AFP and their aetiologies in District of Bannu during time period of four years from 2007 to 2011. It was a cross-sectional descriptive study. Data was collected from EDO office District Bannu and analysed using Microsoft Excel 2007. Results: During this period there were 180 cases of AFP in district Bannu. 15% of cases were diagnosed as Guillian Barre Syndrome, making it the leading aetiology. Only 3 (1.66%) cases were diagnosed with Poliomyelitis. Out of 180 AFP cases 104 cases were male and 76 cases were female. Bannu needs enthusiastic educational and vaccination campaigns to eradicate Polio from the area and henceforth from the Pakistan.

MELTS_Excel: A Microsoft Excel-based MELTS interface for research and teaching of magma properties and evolution

NASA Astrophysics Data System (ADS)

Gualda, Guilherme A. R.; Ghiorso, Mark S.

2015-01-01

thermodynamic modeling software MELTS is a powerful tool for investigating crystallization and melting in natural magmatic systems. Rhyolite-MELTS is a recalibration of MELTS that better captures the evolution of silicic magmas in the upper crust. The current interface of rhyolite-MELTS, while flexible, can be somewhat cumbersome for the novice. We present a new interface that uses web services consumed by a VBA backend in Microsoft Excel©. The interface is contained within a macro-enabled workbook, where the user can insert the model input information and initiate computations that are executed on a central server at OFM Research. Results of simple calculations are shown immediately within the interface itself. It is also possible to combine a sequence of calculations into an evolutionary path; the user can input starting and ending temperatures and pressures, temperature and pressure steps, and the prevailing oxidation conditions. The program shows partial updates at every step of the computations; at the conclusion of the calculations, a series of data sheets and diagrams are created in a separate workbook, which can be saved independently of the interface. Additionally, the user can specify a grid of temperatures and pressures and calculate a phase diagram showing the conditions at which different phases are present. The interface can be used to apply the rhyolite-MELTS geobarometer. We demonstrate applications of the interface using an example early-erupted Bishop Tuff composition. The interface is simple to use and flexible, but it requires an internet connection. The interface is distributed for free from http://melts.ofm-research.org.

GLobal Integrated Design Environment (GLIDE): A Concurrent Engineering Application

NASA Technical Reports Server (NTRS)

McGuire, Melissa L.; Kunkel, Matthew R.; Smith, David A.

2010-01-01

The GLobal Integrated Design Environment (GLIDE) is a client-server software application purpose-built to mitigate issues associated with real time data sharing in concurrent engineering environments and to facilitate discipline-to-discipline interaction between multiple engineers and researchers. GLIDE is implemented in multiple programming languages utilizing standardized web protocols to enable secure parameter data sharing between engineers and researchers across the Internet in closed and/or widely distributed working environments. A well defined, HyperText Transfer Protocol (HTTP) based Application Programming Interface (API) to the GLIDE client/server environment enables users to interact with GLIDE, and each other, within common and familiar tools. One such common tool, Microsoft Excel (Microsoft Corporation), paired with its add-in API for GLIDE, is discussed in this paper. The top-level examples given demonstrate how this interface improves the efficiency of the design process of a concurrent engineering study while reducing potential errors associated with manually sharing information between study participants.

Geologic Field Notes, Geochemical Analyses, and Field Photographs of Outcrops and Rock Samples from the Big Delta B-1 Quadrangle, East-Central Alaska

USGS Publications Warehouse

Day, Warren C.; O'Neill, J. Michael

2008-01-01

The U.S. Geological Survey, in cooperation with the Alaska Department of Natural Resources Division of Mining, Land, and Water, has released a geologic map of the Big Delta B-1 quadrangle of east-central Alaska (Day and others, 2007). This companion report presents the major element oxide and trace element geochemical analyses, including those for gold, silver, and base metals, for representative rock units and for grab samples from quartz veins and mineralized zones within the quadrangle. Also included are field station locations, field notes, structural data, and field photographs based primarily on observations by W.C. Day with additions by J.M. O'Neill and B.M. Gamble, all of the U.S. Geological Survey. The data are provided in both Microsoft Excel spread sheet format and as a Microsoft Access database.

The evolution of the ISOLDE control system

NASA Astrophysics Data System (ADS)

Jonsson, O. C.; Catherall, R.; Deloose, I.; Drumm, P.; Evensen, A. H. M.; Gase, K.; Focker, G. J.; Fowler, A.; Kugler, E.; Lettry, J.; Olesen, G.; Ravn, H. L.; Isolde Collaboration

The ISOLDE on-line mass separator facility is operating on a Personal Computer based control system since spring 1992. Front End Computers accessing the hardware are controlled from consoles running Microsoft Windows ™ through a Novell NetWare4 ™ local area network. The control system is transparently integrated in the CERN wide office network and makes heavy use of the CERN standard office application programs to control and to document the running of the ISOLDE isotope separators. This paper recalls the architecture of the control system, shows its recent developments and gives some examples of its graphical user interface.

The evolution of the ISOLDE control system

NASA Astrophysics Data System (ADS)

Jonsson, O. C.; Catherall, R.; Deloose, I.; Evensen, A. H. M.; Gase, K.; Focker, G. J.; Fowler, A.; Kugler, E.; Lettry, J.; Olesen, G.; Ravn, H. L.; Drumm, P.

1996-04-01

The ISOLDE on-line mass separator facility is operating on a Personal Computer based control system since spring 1992. Front End Computers accessing the hardware are controlled from consoles running Microsoft Windows® through a Novell NetWare4® local area network. The control system is transparently integrated in the CERN wide office network and makes heavy use of the CERN standard office application programs to control and to document the running of the ISOLDE isotope separators. This paper recalls the architecture of the control system, shows its recent developments and gives some examples of its graphical user interface.

Development of a Genetic Algorithm to Automate Clustering of a Dependency Structure Matrix

NASA Technical Reports Server (NTRS)

Rogers, James L.; Korte, John J.; Bilardo, Vincent J.

2006-01-01

Much technology assessment and organization design data exists in Microsoft Excel spreadsheets. Tools are needed to put this data into a form that can be used by design managers to make design decisions. One need is to cluster data that is highly coupled. Tools such as the Dependency Structure Matrix (DSM) and a Genetic Algorithm (GA) can be of great benefit. However, no tool currently combines the DSM and a GA to solve the clustering problem. This paper describes a new software tool that interfaces a GA written as an Excel macro with a DSM in spreadsheet format. The results of several test cases are included to demonstrate how well this new tool works.

Usability Considerations in Developing a Graphic Interface for Intra Office Communications

NASA Astrophysics Data System (ADS)

Yammiyavar, Pradeep; Jain, Piyush

This paper outlines the basis of incorporating functional features in a new GUI based software under development for addressing comprehensive communication and interaction needs within an office environment. Bench marking of features in existing communication software products such as Microsoft Outlook, IBM Lotusnotes, Office Communicator, Mozilla Thunderbird etc. was done by asking a set of questions related to the usage of these existing softwares. Usability issues were identified through a user survey involving 30 subjects of varied profiles (domain, designation, age etc.) in a corporate office. It is posited that existing software products that have been developed for a universal market may be highly underutilized or have redundant features especially for use as an intra office (within the same office) communication medium. Simultaneously they may not cater to some very contextual requirements of intra office communications. Based on the findings of the survey of feature preferences & usability of existing products, a simple 'person to person' communicating medium for intra office situations was visualized with a new interactive GUI. Usability issues that need to be considered for a new intra-office product have been brought out.

Moving Business and Marketing Education into the 21st Century. Proceedings of the Annual Meeting of the Atlantic Coast Business and Marketing Education Conference (17th, Raleigh, North Carolina, February 18-19, 2000).

ERIC Educational Resources Information Center

Parke, David, Ed.

This document contains 21 presentations from a conference on business and marketing education. The following papers are included: "Microsoft Excel 2000" (Jeff Fuller); "Clueless in the Classroom? Hints To Help!" (Mary W. Evans); "A Strategy To Improve Narrative-Number Linkage in Business Writing" (Ellis A. Hayes);…

Investigation into Hybrid Rockets and Other Cost-Effective Propulsion System Options for Small Satellites

DTIC Science & Technology

1996-05-01

8-7 COMPLETE TEXT OF THESIS ROCKET PROPULSION FUNDEMENTALS EXPERIMENTAL DATA (MICROSOFT EXCEL FILES) 4 ANALYSIS WORKSHEETS (MATHSOFT MATHCAD FILES...up and running. At ~413,000, this represents a very small investment considering it encompasses the entire program. Similar programs run at... investment would be -needed along with over two man-years of effort. However, this is for the first flight article. Subsequent flight articles of identical

Determining Binary Star Orbits Using Kepler's Equation

NASA Astrophysics Data System (ADS)

Boule, Cory; Andrews, Kaitlyn; Penfield, Andrew; Puckette, Ian; Goodale, Keith; Harfenist, Steven

2017-04-01

Students calculated ephemerides and generated orbits of four well-known binary systems. Using an iterative technique in Microsoft® Excel® to solve Kepler's equation, separation and position angle values were generated as well as plots of the apparent orbits. Current position angle and separation values were measured in the field and compared well to the calculated values for the stars: STF1196AB,C, STF296AB, STF296AB and STF60AB.

Future Automotive Systems Technology Simulator (FASTSim)

DOE Office of Scientific and Technical Information (OSTI.GOV)

An advanced vehicle powertrain systems analysis tool, the Future Automotive Systems Technology Simulator (FASTSim) provides a simple way to compare powertrains and estimate the impact of technology improvements on light-, medium- and heavy-duty vehicle efficiency, performance, cost, and battery life. Created by the National Renewable Energy Laboratory, FASTSim accommodates a range of vehicle types - including conventional vehicles, electric-drive vehicles, and fuel cell vehicles - and is available for free download in Microsoft Excel and Python formats.

WestProPlus: a stochastic spreadsheet program for the management of all-aged Douglas-fir–hemlock forests in the Pacific Northwest.

Treesearch

Jingjing Liang; Joseph Buongiorno; Robert A. Monserud

2006-01-01

WestProPlus is an add-in program developed to work with Microsoft Excel to simulate the growth and management of all-aged Douglas-fir–western hemlock (Pseudotsuga menziesii (Mirb.) Franco–Tsuga heterophylla (Raf.) Sarg.) stands in Oregon and Washington. Its built-in growth model was calibrated from 2,706 permanent plots in the...

Using a Spreadsheet to Solve the Schro¨dinger Equations for the Energies of the Ground Electronic State and the Two Lowest Excited States of H[subscript2

ERIC Educational Resources Information Center

Ge, Yingbin; Rittenhouse, Robert C.; Buchanan, Jacob C.; Livingston, Benjamin

2014-01-01

We have designed an exercise suitable for a lab or project in an undergraduate physical chemistry course that creates a Microsoft Excel spreadsheet to calculate the energy of the S[subscript 0] ground electronic state and the S[subscript 1] and T[subscript 1] excited states of H[subscript 2]. The spreadsheet calculations circumvent the…

Improving the Cost Efficiency and Readiness of MC-130 Aircrew Training: A Case Study

DTIC Science & Technology

2015-01-01

51 Jiang, Changbing, "A reliable solver of Euclidean traveling salesman problems with Microsoft excel add-in tools for small-size systems...DisplayPage.aspx?DocType=Reference&ItemId=+++1 343364&Pubabbrev=JAWA 124 Jiang, Changbing, "A Reliable Solver of Euclidean Traveling Salesman Problems with...49 Figure 4.5 Training Resources Locations Traveling Salesperson Problem In order to participate in training, aircrews must fly to the

Component, Context and Manufacturing Model Library (C2M2L)

DTIC Science & Technology

2013-03-01

Penn State team were stored in a relational database for easy access, storage and maintainability. The relational database consisted of a PostGres ...file into a format that can be imported into the PostGres database. This same custom application was used to generate Microsoft Excel templates...Press Break Forming Equipment 4.14 Manufacturing Model Library Database Structure The data storage mechanism for the ARL PSU MML was a PostGres database

[Demand for environmental medical advice at public health offices: experiences in the district aachen public health office].

PubMed

Wiesmüller, G A; Etschenberg, W; Koch, T; Konteye, C; Zahmel, J

2002-03-01

Since November, 1999 environmental medical advice is offered to interested citizens in the Aachen district at the District Aachen Public Health Office in cooperation with the outpatient unit of environmental medicine (UEM) of the Institute of Hygiene and Environmental Medicine of the University Hospital at Aachen, Germany. Advisory cases are documented in a data bank of Microsoft(R) Access 97. Until now, all advisory cases between November, 1999 and March, 2001 have been descriptively analysed. In this period, 34 personal and two telephonic advices were performed. The frequency of advisory activities is in the lower rang of published experiences in environmental medicine. Age distribution, more frequent advice utilization by women than by men and predominance of unspecific health disorders are comparable with published environmental medical experiences. However, in respect of suspected exposures, unspecific indoor-related environmental factors are predominant. In the past this was true for wood preservatives. Judgement about possible relationships between suspected environmental factors and health disorders or diseases was positive among 11.8 % of the persons seeking advice. This percentage is higher than published experiences which mostly show values below 10 %. It must be considered that this judgement depends primarily on the physician. Other reasons may be the too small number of advice seeking persons and selective influences. Furthermore, a definite judgement can be made only after environmental medical diagnostics (biological monitoring, local inspection, ambient monitoring) and differential diagnostics. Conspicuously, 76.5 % of the advisory cases had no contact to environmental medicine prior to the environmental medical advice at the Aachen District Public Health Office. This points to an information deficit about possibilities to clarify questions concerning environmental medicine in the population. In this context a regional guide on environmental medicine may be helpful. The environmental medical advice for citizens is an excellent example of a successful cooperation between a public health office and an university, which have different special experience in environmental hygiene and environmental medicine. This cooperation brings selectively citizens seeking for advice in environment-related health risks and disorders to practitioners specialised in environmental medicine.

ARS-Media for Excel: A Spreadsheet Tool for Calculating Media Recipes Based on Ion-Specific Constraints.

PubMed

Niedz, Randall P

2016-01-01

ARS-Media for Excel is an ion solution calculator that uses "Microsoft Excel" to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Excel's Solver add-on solves the linear programming equation to generate a recipe. Calculating a mixture of salts to generate exact solutions of complex ionic mixtures is required for at least 2 types of problems- 1) formulating relevant ecological/biological ionic solutions such as those from a specific lake, soil, cell, tissue, or organ and, 2) designing ion confounding-free experiments to determine ion-specific effects where ions are treated as statistical factors. Using ARS-Media for Excel to solve these two problems is illustrated by 1) exactly reconstructing a soil solution representative of a loamy agricultural soil and, 2) constructing an ion-based experiment to determine the effects of substituting Na+ for K+ on the growth of a Valencia sweet orange nonembryogenic cell line.

Genotypic characterization of Escherichia coli O157:H7 isolates from different sources in the North-West Province, South Africa, using enterobacterial repetitive intergenic consensus PCR analysis.

PubMed

Ateba, Collins Njie; Mbewe, Moses

2014-05-30

In many developing countries, proper hygiene is not strictly implemented when animals are slaughtered and meat products become contaminated. Contaminated meat may contain Escherichia coli (E. coli) O157:H7 that could cause diseases in humans if these food products are consumed undercooked. In the present study, a total of 94 confirmed E. coli O157:H7 isolates were subjected to the enterobacterial repetitive intergenic consensus (ERIC) polymerase chain reaction (PCR) typing to generate genetic fingerprints. The ERIC fragments were resolved by electrophoresis on 2% (w/v) agarose gels. The presence, absence and intensity of band data were obtained, exported to Microsoft Excel (Microsoft Office 2003) and used to generate a data matrix. The unweighted pair group method with arithmetic mean (UPGMA) and complete linkage algorithms were used to analyze the percentage of similarity and matrix data. Relationships between the various profiles and/or lanes were expressed as dendrograms. Data from groups of related lanes were compiled and reported on cluster tables. ERIC fragments ranged from one to 15 per isolate, and their sizes varied from 0.25 to 0.771 kb. A large proportion of the isolates produced an ERIC banding pattern with three duplets ranging in sizes from 0.408 to 0.628 kb. Eight major clusters (I-VIII) were identified. Overall, the remarkable similarities (72% to 91%) between the ERIC profiles for the isolate from animal species and their corresponding food products indicated some form of contamination, which may not exclude those at the level of the abattoirs. These results reveal that ERIC PCR analysis can be reliable in comparing the genetic profiles of E. coli O157:H7 from different sources in the North-West Province of South Africa.

Tutorial: simulating chromatography with Microsoft Excel Macros.

PubMed

Kadjo, Akinde; Dasgupta, Purnendu K

2013-04-22

Chromatography is one of the cornerstones of modern analytical chemistry; developing an instinctive feeling for how chromatography works will be invaluable to future generation of chromatographers. Specialized software programs exist that handle and manipulate chromatographic data; there are also some that simulate chromatograms. However, the algorithm details of such software are not transparent to a beginner. In contrast, how spreadsheet tools like Microsoft Excel™ work is well understood and the software is nearly universally available. We show that the simple repetition of an equilibration process at each plate (a spreadsheet row) followed by discrete movement of the mobile phase down by a row, easily automated by a subroutine (a "Macro" in Excel), readily simulates chromatography. The process is readily understood by a novice. Not only does this permit simulation of isocratic and simple single step gradient elution, linear or multistep gradients are also easily simulated. The versatility of a transparent and easily understandable computational platform further enables the simulation of complex but commonly encountered chromatographic scenarios such as the effects of nonlinear isotherms, active sites, column overloading, on-column analyte degradation, etc. These are not as easily simulated by available software. Views of the separation as it develops on the column and as it is seen by an end-column detector are both available in real time. Excel 2010™ also permits a 16-level (4-bit) color gradation of numerical values in a column/row; this permits visualization of a band migrating down the column, much as Tswett may have originally observed, but in a numerical domain. All parameters of relevance (partition constants, elution conditions, etc.) are readily changed so their effects can be examined. Illustrative Excel spreadsheets are given in the Supporting Information; these are easily modified by the user or the user can write his/her own routine. Copyright © 2012 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Jing-Jy; Flood, Paul E.; LePoire, David

In this report, the results generated by RESRAD-RDD version 2.01 are compared with those produced by RESRAD-RDD version 1.7 for different scenarios with different sets of input parameters. RESRAD-RDD version 1.7 is spreadsheet-driven, performing calculations with Microsoft Excel spreadsheets. RESRAD-RDD version 2.01 revamped version 1.7 by using command-driven programs designed with Visual Basic.NET to direct calculations with data saved in Microsoft Access database, and re-facing the graphical user interface (GUI) to provide more flexibility and choices in guideline derivation. Because version 1.7 and version 2.01 perform the same calculations, the comparison of their results serves as verification of both versions.more » The verification covered calculation results for 11 radionuclides included in both versions: Am-241, Cf-252, Cm-244, Co-60, Cs-137, Ir-192, Po-210, Pu-238, Pu-239, Ra-226, and Sr-90. At first, all nuclidespecific data used in both versions were compared to ensure that they are identical. Then generic operational guidelines and measurement-based radiation doses or stay times associated with a specific operational guideline group were calculated with both versions using different sets of input parameters, and the results obtained with the same set of input parameters were compared. A total of 12 sets of input parameters were used for the verification, and the comparison was performed for each operational guideline group, from A to G, sequentially. The verification shows that RESRAD-RDD version 1.7 and RESRAD-RDD version 2.01 generate almost identical results; the slight differences could be attributed to differences in numerical precision with Microsoft Excel and Visual Basic.NET. RESRAD-RDD version 2.01 allows the selection of different units for use in reporting calculation results. The results of SI units were obtained and compared with the base results (in traditional units) used for comparison with version 1.7. The comparison shows that RESRAD-RDD version 2.01 correctly reports calculation results in the unit specified in the GUI.« less

An Excel Workbook for Identifying Redox Processes in Ground Water

USGS Publications Warehouse

Jurgens, Bryant C.; McMahon, Peter B.; Chapelle, Francis H.; Eberts, Sandra M.

2009-01-01

The reduction/oxidation (redox) condition of ground water affects the concentration, transport, and fate of many anthropogenic and natural contaminants. The redox state of a ground-water sample is defined by the dominant type of reduction/oxidation reaction, or redox process, occurring in the sample, as inferred from water-quality data. However, because of the difficulty in defining and applying a systematic redox framework to samples from diverse hydrogeologic settings, many regional water-quality investigations do not attempt to determine the predominant redox process in ground water. Recently, McMahon and Chapelle (2008) devised a redox framework that was applied to a large number of samples from 15 principal aquifer systems in the United States to examine the effect of redox processes on water quality. This framework was expanded by Chapelle and others (in press) to use measured sulfide data to differentiate between iron(III)- and sulfate-reducing conditions. These investigations showed that a systematic approach to characterize redox conditions in ground water could be applied to datasets from diverse hydrogeologic settings using water-quality data routinely collected in regional water-quality investigations. This report describes the Microsoft Excel workbook, RedoxAssignment_McMahon&Chapelle.xls, that assigns the predominant redox process to samples using the framework created by McMahon and Chapelle (2008) and expanded by Chapelle and others (in press). Assignment of redox conditions is based on concentrations of dissolved oxygen (O2), nitrate (NO3-), manganese (Mn2+), iron (Fe2+), sulfate (SO42-), and sulfide (sum of dihydrogen sulfide [aqueous H2S], hydrogen sulfide [HS-], and sulfide [S2-]). The logical arguments for assigning the predominant redox process to each sample are performed by a program written in Microsoft Visual Basic for Applications (VBA). The program is called from buttons on the main worksheet. The number of samples that can be analyzed is only limited by the number of rows in Excel (65,536 for Excel 2003 and XP; and 1,048,576 for Excel 2007), and is therefore appropriate for large datasets.

A Methodology for Conducting Space Utilization Studies within Department of Defense Medical Facilities

DTIC Science & Technology

1992-07-01

database programs, such as dBase or Microsoft Excell, to yield statistical reports that can profile the health care facility . Ladeen (1989) feels that the...service specific space status report would be beneficial to the specific service(s) under study, it would not provide sufficient data for facility -wide...change in the Master Space Plan. The revised methodology also provides a mechanism and forum for spuce management education within the facility . The

Improving Intercontinental Ballistic Missile Maintenance Scheduling Through the Use of Location Analysis Methodologies

DTIC Science & Technology

2006-03-01

factors that “maximize the benefit of location to the firm” ( Heizer & Render , 2004:302-307). In the book, Facility Location: Applications and Theory...Fylstra, D., Lasdon, L., Watson, J. and Waren, A. “Design and Use of the Microsoft Excel Solver,” Interfaces, 28(5):29-55, 1998. Heizer , Jay...and Render , Barry. Principles of Operations Management (5th ed.). New Jersey: Pearson Education Inc., 2004. Hofstra University. (n.d.). Von

Application Development for Optimizing Patient Placement on Aeromedical Evacuation Flights: Proof-of-Concept

DTIC Science & Technology

2018-01-12

outcomes. This study included three phases: knowledge elicitation, establishment of rule-based, logic requirements, and the development of the POC iOS ...establish the logic needed for a mobile app prior to programming for iOS platforms. The study team selected Microsoft Excel because it enabled the...distribution of these plans would streamline the plan development process. Thus, as a proof-of-concept, the study team conducted a multi-phased effort

Optimizing Distributed Sensor Placement for Border Patrol Interdiction Using Microsoft Excel

DTIC Science & Technology

2007-04-01

weather conditions and they can be evaded by using techniques which minimize heat signatures use of lasers and other technologies day or night (26:8...technologies which can be used for border security. Maier [2004] developed a seismic intrusion sensor technology which uses fiber optic cables, lasers , and...needed to create the is used as the base map for the network. program originally developed by Keyhole by Google Inc. It provides satellite images of

Catalog of Tephra Samples from Kilauea's Summit Eruption, March-December 2008

USGS Publications Warehouse

Wooten, Kelly M.; Thornber, Carl R.; Orr, Tim R.; Ellis, Jennifer F.; Trusdell, Frank A.

2009-01-01

The opening of a new vent within Halema'uma'u Crater in March 2008 ended a 26-year period of no eruptive activity at the summit of Kilauea Volcano. It also heralded the first explosive activity at Kilauea's summit since 1924 and the first of eight discrete explosive events in 2008. At the onset of the eruption, the Hawaiian Volcano Observatory (HVO) initiated a rigorous program of sample collection to provide a temporally constrained suite of tephra samples for petrographic, geochemical, and isotopic studies. Petrologic studies help us understand conditions of magma generation at depth; processes related to transport, storage, and mixing of magma within the shallow summit region; and specific circumstances leading to explosive eruptions. This report provides a catalog of tephra samples erupted at Kilauea's summit from March 19, 2008, through the end of 2008. The Kilauea 2008 Summit Sample Catalog is tabulated in the accompanying Microsoft Excel file, of2009-1134.xls (four file types linked on right). The worksheet in this file provides sampling information and sample descriptions. Contextual information for this catalog is provided below and includes (1) a narrative of 2008 summit eruptive activity, (2) a description of sample collection methods, (3) a scheme for characterizing a diverse range in tephra lithology, and (4) an explanation of each category of sample information (column headers) in the Microsoft Excel worksheet.

TK Modeler version 1.0, a Microsoft® Excel®-based modeling software for the prediction of diurnal blood/plasma concentration for toxicokinetic use.

PubMed

McCoy, Alene T; Bartels, Michael J; Rick, David L; Saghir, Shakil A

2012-07-01

TK Modeler 1.0 is a Microsoft® Excel®-based pharmacokinetic (PK) modeling program created to aid in the design of toxicokinetic (TK) studies. TK Modeler 1.0 predicts the diurnal blood/plasma concentrations of a test material after single, multiple bolus or dietary dosing using known PK information. Fluctuations in blood/plasma concentrations based on test material kinetics are calculated using one- or two-compartment PK model equations and the principle of superposition. This information can be utilized for the determination of appropriate dosing regimens based on reaching a specific desired C(max), maintaining steady-state blood/plasma concentrations, or other exposure target. This program can also aid in the selection of sampling times for accurate calculation of AUC(24h) (diurnal area under the blood concentration time curve) using sparse-sampling methodologies (one, two or three samples). This paper describes the construction, use and validation of TK Modeler. TK Modeler accurately predicted blood/plasma concentrations of test materials and provided optimal sampling times for the calculation of AUC(24h) with improved accuracy using sparse-sampling methods. TK Modeler is therefore a validated, unique and simple modeling program that can aid in the design of toxicokinetic studies. Copyright © 2012 Elsevier Inc. All rights reserved.

Arsenic removal from contaminated groundwater by membrane-integrated hybrid plant: optimization and control using Visual Basic platform.

PubMed

Chakrabortty, S; Sen, M; Pal, P

2014-03-01

A simulation software (ARRPA) has been developed in Microsoft Visual Basic platform for optimization and control of a novel membrane-integrated arsenic separation plant in the backdrop of absence of such software. The user-friendly, menu-driven software is based on a dynamic linearized mathematical model, developed for the hybrid treatment scheme. The model captures the chemical kinetics in the pre-treating chemical reactor and the separation and transport phenomena involved in nanofiltration. The software has been validated through extensive experimental investigations. The agreement between the outputs from computer simulation program and the experimental findings are excellent and consistent under varying operating conditions reflecting high degree of accuracy and reliability of the software. High values of the overall correlation coefficient (R (2) = 0.989) and Willmott d-index (0.989) are indicators of the capability of the software in analyzing performance of the plant. The software permits pre-analysis, manipulation of input data, helps in optimization and exhibits performance of an integrated plant visually on a graphical platform. Performance analysis of the whole system as well as the individual units is possible using the tool. The software first of its kind in its domain and in the well-known Microsoft Excel environment is likely to be very useful in successful design, optimization and operation of an advanced hybrid treatment plant for removal of arsenic from contaminated groundwater.

Simulations of the cardiac action potential based on the Hodgkin-Huxley kinetics with the use of Microsoft Excel spreadsheets.

PubMed

Wu, Sheng-Nan

2004-03-31

The purpose of this study was to develop a method to simulate the cardiac action potential using a Microsoft Excel spreadsheet. The mathematical model contained voltage-gated ionic currents that were modeled using either Beeler-Reuter (B-R) or Luo-Rudy (L-R) phase 1 kinetics. The simulation protocol involves the use of in-cell formulas directly typed into a spreadsheet. The capability of spreadsheet iteration was used in these simulations. It does not require any prior knowledge of computer programming, although the use of the macro language can speed up the calculation. The normal configuration of the cardiac ventricular action potential can be well simulated in the B-R model that is defined by four individual ionic currents, each representing the diffusion of ions through channels in the membrane. The contribution of Na+ inward current to the rate of depolarization is reproduced in this model. After removal of Na+ current from the model, a constant current stimulus elicits an oscillatory change in membrane potential. In the L-R phase 1 model where six types of ionic currents were defined, the effect of extracellular K+ concentration on changes both in the time course of repolarization and in the time-independent K+ current can be demonstrated, when the solutions are implemented in Excel. Using the simulation protocols described here, the users can readily study and graphically display the underlying properties of ionic currents to see how changes in these properties determine the behavior of the heart cell. The method employed in these simulation protocols may also be extended or modified to other biological simulation programs.

Development and Validation of a Portable and Inexpensive Tool to Measure the Drop Vertical Jump Using the Microsoft Kinect V2.

PubMed

Gray, Aaron D; Willis, Brad W; Skubic, Marjorie; Huo, Zhiyu; Razu, Swithin; Sherman, Seth L; Guess, Trent M; Jahandar, Amirhossein; Gulbrandsen, Trevor R; Miller, Scott; Siesener, Nathan J

Noncontact anterior cruciate ligament (ACL) injury in adolescent female athletes is an increasing problem. The knee-ankle separation ratio (KASR), calculated at initial contact (IC) and peak flexion (PF) during the drop vertical jump (DVJ), is a measure of dynamic knee valgus. The Microsoft Kinect V2 has shown promise as a reliable and valid marker-less motion capture device. The Kinect V2 will demonstrate good to excellent correlation between KASR results at IC and PF during the DVJ, as compared with a "gold standard" Vicon motion analysis system. Descriptive laboratory study. Level 2. Thirty-eight healthy volunteer subjects (20 male, 18 female) performed 5 DVJ trials, simultaneously measured by a Vicon MX-T40S system, 2 AMTI force platforms, and a Kinect V2 with customized software. A total of 190 jumps were completed. The KASR was calculated at IC and PF during the DVJ. The intraclass correlation coefficient (ICC) assessed the degree of KASR agreement between the Kinect and Vicon systems. The ICCs of the Kinect V2 and Vicon KASR at IC and PF were 0.84 and 0.95, respectively, showing excellent agreement between the 2 measures. The Kinect V2 successfully identified the KASR at PF and IC frames in 182 of 190 trials, demonstrating 95.8% reliability. The Kinect V2 demonstrated excellent ICC of the KASR at IC and PF during the DVJ when compared with the Vicon system. A customized Kinect V2 software program demonstrated good reliability in identifying the KASR at IC and PF during the DVJ. Reliable, valid, inexpensive, and efficient screening tools may improve the accessibility of motion analysis assessment of adolescent female athletes.

The personal receiving document management and the realization of email function in OAS

NASA Astrophysics Data System (ADS)

Li, Biqing; Li, Zhao

2017-05-01

This software is an independent software system, suitable for small and medium enterprises, contains personal office, scientific research project management and system management functions, independently run in relevant environment, and to solve practical needs. This software is an independent software system, using the current popular B/S (browser/server) structure and ASP.NET technology development, using the Windows 7 operating system, Microsoft SQL Server2005 Visual2008 and database as a development platform, suitable for small and medium enterprises, contains personal office, scientific research project management and system management functions, independently run in relevant environment, and to solve practical needs.

Recording an Excel(®) Macro to Specify Date Ranges for Clinical Data.

PubMed

Deochand, Neil; Costello, Mack S; Fuqua, R Wayne

2016-09-01

The individuals served by behavior analysts are often funded by Medicaid, insurance companies, or private pay. The first two options usually require progress notes detailing graphically and quantitatively the behavioral outcomes. These progress notes usually come in the form of a written account of milestones achieved or barriers faced, graphical displays of behavioral data, and summary tables. The graphical displays are monthly, quarterly, and annual reports for the individuals that they serve. Microsoft Excel® is one of the most accessible tools by which to accomplish this task; however, presenting the required date ranges can be a time-consuming task. A task analysis is outlined to automate this process and reduce the time taken to accomplish indirect service hours to the clients served.

Assessment of polytechnic students' understanding of basic algebra

NASA Astrophysics Data System (ADS)

Mokmin, Nur Azlina Mohamed; Masood, Mona

2015-12-01

It is important for engineering students to excel in algebra. Previous studies show that the algebraic fraction is a subtopic of algebra that was found to be the most challenging for engineering students. This study is done with 191 first semester engineering students who have enrolled in engineering programs in Malaysian polytechnic. The respondents are divided into Group 1 (Distinction) and Group 2 (Credit) based on their Mathematics SPM result. A computer application is developed for this study to assess student information and understanding of the algebraic fraction topic. The result is analyzed using SPSS and Microsoft Excel. The test results show that there are significant differences between Group 1 and Group 2 and that most of the students scored below the minimum requirement.

A Pilot Study of the Interface Design of Cross-Cultural Web Sites through Usability Testing of Multilanguage Web Sites and Determining the Preferences of Taiwanese and American Users

ERIC Educational Resources Information Center

Ku, David Tawei; Chang, Chia-Chi

2014-01-01

By conducting usability testing on a multilanguage Web site, this study analyzed the cultural differences between Taiwanese and American users in the performance of assigned tasks. To provide feasible insight into cross-cultural Web site design, Microsoft Office Online (MOO) that supports both traditional Chinese and English and contains an almost…

78 FR 64064 - Agency Information Collection (Principles of Excellence Complaint System Intake) Activity Under...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... (Principles of Excellence Complaint System Intake) Activity Under OMB Review AGENCY: Veterans Benefits... to the Office of Management and Budget (OMB) for review and comment. The PRA submission describes the... Information and Regulatory Affairs, Office of Management and Budget, Attn: VA Desk Officer; 725 17th St. NW...

Escape Excel: A tool for preventing gene symbol and accession conversion errors.

PubMed

Welsh, Eric A; Stewart, Paul A; Kuenzi, Brent M; Eschrich, James A

2017-01-01

Microsoft Excel automatically converts certain gene symbols, database accessions, and other alphanumeric text into dates, scientific notation, and other numerical representations. These conversions lead to subsequent, irreversible, corruption of the imported text. A recent survey of popular genomic literature estimates that one-fifth of all papers with supplementary gene lists suffer from this issue. Here, we present an open-source tool, Escape Excel, which prevents these erroneous conversions by generating an escaped text file that can be safely imported into Excel. Escape Excel is implemented in a variety of formats (http://www.github.com/pstew/escape_excel), including a command line based Perl script, a Windows-only Excel Add-In, an OS X drag-and-drop application, a simple web-server, and as a Galaxy web environment interface. Test server implementations are accessible as a Galaxy interface (http://apostl.moffitt.org) and simple non-Galaxy web server (http://apostl.moffitt.org:8000/). Escape Excel detects and escapes a wide variety of problematic text strings so that they are not erroneously converted into other representations upon importation into Excel. Examples of problematic strings include date-like strings, time-like strings, leading zeroes in front of numbers, and long numeric and alphanumeric identifiers that should not be automatically converted into scientific notation. It is hoped that greater awareness of these potential data corruption issues, together with diligent escaping of text files prior to importation into Excel, will help to reduce the amount of Excel-corrupted data in scientific analyses and publications.

Relative Motion of the WDS 05110+3203 STF 648 System, With a Protocol for Calculating Relative Motion

NASA Astrophysics Data System (ADS)

Wiley, E. O.

2010-07-01

Relative motion studies of visual double stars can be investigated using least squares regression techniques and readily accessible programs such as Microsoft Excel and a calculator. Optical pairs differ from physical pairs under most geometries in both their simple scatter plots and their regression models. A step-by-step protocol for estimating the rectilinear elements of an optical pair is presented. The characteristics of physical pairs using these techniques are discussed.

E-Area Low-Level Waste Facility Vadose Zone Model: Confirmation of Water Mass Balance for Subsidence Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dyer, J. A.

In preparation for the next revision of the E-Area Low-Level Waste Facility (LLWF) Performance Assessment (PA), a mass balance model was developed in Microsoft Excel to confirm correct implementation of intact- and subsided-area infiltration profiles for the proposed closure cap in the PORFLOW vadose-zone model. The infiltration profiles are based on the results of Hydrologic Evaluation of Landfill Performance (HELP) model simulations for both intact and subsided cases.

Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program.

PubMed

Afouxenidis, D; Polymeris, G S; Tsirliganis, N C; Kitis, G

2012-05-01

This paper exploits the possibility of using commercial software for thermoluminescence and optically stimulated luminescence curve deconvolution analysis. The widely used software package Microsoft Excel, with the Solver utility has been used to perform deconvolution analysis to both experimental and reference glow curves resulted from the GLOw Curve ANalysis INtercomparison project. The simple interface of this programme combined with the powerful Solver utility, allows the analysis of complex stimulated luminescence curves into their components and the evaluation of the associated luminescence parameters.

Validation Results for LEWICE 2.0. [Supplement

NASA Technical Reports Server (NTRS)

Wright, William B.; Rutkowski, Adam

1999-01-01

Two CD-ROMs contain experimental ice shapes and code prediction used for validation of LEWICE 2.0 (see NASA/CR-1999-208690, CASI ID 19990021235). The data include ice shapes for both experiment and for LEWICE, all of the input and output files for the LEWICE cases, JPG files of all plots generated, an electronic copy of the text of the validation report, and a Microsoft Excel(R) spreadsheet containing all of the quantitative measurements taken. The LEWICE source code and executable are not contained on the discs.

Space-Plane Spreadsheet Program

NASA Technical Reports Server (NTRS)

Mackall, Dale

1993-01-01

Basic Hypersonic Data and Equations (HYPERDATA) spreadsheet computer program provides data gained from three analyses of performance of space plane. Equations used to perform analyses derived from Newton's second law of physics, derivation included. First analysis is parametric study of some basic factors affecting ability of space plane to reach orbit. Second includes calculation of thickness of spherical fuel tank. Third produces ratio between volume of fuel and total mass for each of various aircraft. HYPERDATA intended for use on Macintosh(R) series computers running Microsoft Excel 3.0.

Preliminary analysis techniques for ring and stringer stiffened cylindrical shells

NASA Technical Reports Server (NTRS)

Graham, J.

1993-01-01

This report outlines methods of analysis for the buckling of thin-walled circumferentially and longitudinally stiffened cylindrical shells. Methods of analysis for the various failure modes are presented in one cohesive package. Where applicable, more than one method of analysis for a failure mode is presented along with standard practices. The results of this report are primarily intended for use in launch vehicle design in the elastic range. A Microsoft Excel worksheet with accompanying macros has been developed to automate the analysis procedures.

Logistic and Multiple Regression: A Two-Pronged Approach to Accurately Estimate Cost Growth in Major DoD Weapon Systems

DTIC Science & Technology

2004-03-01

Breusch - Pagan test for constant variance of the residuals. Using Microsoft Excel® we calculate a p-value of 0.841237. This high p-value, which is above...our alpha of 0.05, indicates that our residuals indeed pass the Breusch - Pagan test for constant variance. In addition to the assumption tests , we...Wilk Test for Normality – Support (Reduced) Model (OLS) Finally, we perform a Breusch - Pagan test for constant variance of the residuals. Using

Data Analysis and Its Impact on Predicting Schedule & Cost Risk

DTIC Science & Technology

2006-03-01

variance of the error term by performing a Breusch - Pagan test for constant variance (Neter et al., 1996:239). In order to test the normality of...is constant variance. Using Microsoft Excel®, we calculate a p- 68 value of 0.225678 for the Breusch - Pagan test . We again compare this p-value to...calculate a p-value of 0.121211092 Breusch - Pagan test . We again compare this p-value to an alpha of 0.05 indicating our assumption of constant variance

Treatment Cost Analysis Tool (TCAT) for Estimating Costs of Outpatient Treatment Services

PubMed Central

Flynn, Patrick M.; Broome, Kirk M.; Beaston-Blaakman, Aaron; Knight, Danica K.; Horgan, Constance M.; Shepard, Donald S.

2009-01-01

A Microsoft® Excel-based workbook designed for research analysts to use in a national study was retooled for treatment program directors and financial officers to allocate, analyze, and estimate outpatient treatment costs in the U.S. This instrument can also be used as a planning and management tool to optimize resources and forecast the impact of future changes in staffing, client flow, program design, and other resources. The Treatment Cost Analysis Tool (TCAT) automatically provides feedback and generates summaries and charts using comparative data from a national sample of non-methadone outpatient providers. TCAT is being used by program staff to capture and allocate both economic and accounting costs, and outpatient service costs are reported for a sample of 70 programs. Costs for an episode of treatment in regular, intensive, and mixed types of outpatient treatment types were $882, $1,310, and $1,381 respectively (based on 20% trimmed means and 2006 dollars). An hour of counseling cost $64 in regular, $85 intensive, and $86 mixed. Group counseling hourly costs per client were $8, $11, and $10 respectively for regular, intensive, and mixed. Future directions include use of a web-based interview version, much like some of the commercially available tax preparation software tools, and extensions for use in other modalities of treatment. PMID:19004576

Treatment Cost Analysis Tool (TCAT) for estimating costs of outpatient treatment services.

PubMed

Flynn, Patrick M; Broome, Kirk M; Beaston-Blaakman, Aaron; Knight, Danica K; Horgan, Constance M; Shepard, Donald S

2009-02-01

A Microsoft Excel-based workbook designed for research analysts to use in a national study was retooled for treatment program directors and financial officers to allocate, analyze, and estimate outpatient treatment costs in the U.S. This instrument can also be used as a planning and management tool to optimize resources and forecast the impact of future changes in staffing, client flow, program design, and other resources. The Treatment Cost Analysis Tool (TCAT) automatically provides feedback and generates summaries and charts using comparative data from a national sample of non-methadone outpatient providers. TCAT is being used by program staff to capture and allocate both economic and accounting costs, and outpatient service costs are reported for a sample of 70 programs. Costs for an episode of treatment in regular, intensive, and mixed types of outpatient treatment were $882, $1310, and $1381 respectively (based on 20% trimmed means and 2006 dollars). An hour of counseling cost $64 in regular, $85 intensive, and $86 mixed. Group counseling hourly costs per client were $8, $11, and $10 respectively for regular, intensive, and mixed. Future directions include use of a web-based interview version, much like some of the commercially available tax preparation software tools, and extensions for use in other modalities of treatment.

The contribution of community health workers to the control of Buruli ulcer in the Ngoantet area, Cameroon.

PubMed

Vouking, Marius Zambou; Takougang, Innocent; Mbam, Léonard Mbam; Mbuagbaw, Lawrence; Tadenfok, Carine Nouboudem; Tamo, Claire Violette

2013-01-01

Buruli ulcer (BU) is a skin disease caused by Mycobacterium ulcerans. It is the third most common mycobacterial infection after tuberculosis and leprosy. Community Health Workers (CHWs) hold the potential to support patients and their families at the community level. We conducted a cross-sectional descriptive study to assess the participation of CHWs in the early diagnosis and treatment of BU in Ngoantet, Cameroon. The CHWs performance was measured using: the number of cases referred to the Ngoantet Health Centre, the percentage of accomplished referrals, the percentage of cases referred by CHWs confirmed by the staff of Ngoantet Health Centre. Data was analyzed using Epi-info version 3.4.1. and Microsoft Office Excel 2003. The study focused on 51 CHWs in the Ngoantet health area. The referral rate was 95.0%. Most of the suspicious cases (91.5%) referred were confirmed by health workers. Most CHWs (78.4%) declared that they had identified at least one presumptive case of BU infection. We conclude that the CHWs can play a key role in scaling up BU control activities using a referral system. This study confirms the role of home visits and inspections in the early detection and treatment of BU.

Prevalence of human T-cell lymphotropic virus types 1 and 2 in blood donors of the Caruaru Blood Center (Hemope).

PubMed

de Lima, Waleska Mayara Gomes; Esteves, Fabrício Andrade Martins; Torres, Maria do Carmo Morais Rodrigues; Pires, Edna Suely Feitosa

2013-01-01

There is difficulty in gathering data on the prevalence of human T-cell lymphotropic virus in blood donors as confirmatory testing is not mandatory in Brazil. This suggests there may be an underreporting of the prevalence. To estimate the prevalence of human T-cell lymphotropic virus types 1 and 2 in donors of a blood bank in Caruaru, Brazil. This was an observational, epidemiological, descriptive, longitudinal and retrospective study with information about the serology of donors of the Caruaru Blood Center, Fundação de Hematologia e Hemoterapia de Pernambuco (Hemope) from May 2006 to December 2010. The data were analyzed using the Excel 2010 computer program (Microsoft Office(®)). Of 61,881 donors, 60 (0.096%) individuals were identified as potential carriers of human T-cell lymphotropic virus types 1 and 2. Of these, 28 (0.045%) were positive and 32 (0.051%) had inconclusive results in the serological screening. Forty-five (0.072%) were retested; 17 were positive (0.027%) and 3 inconclusive (0.005%). After confirmatory tests, 8 were positive (0.013%). Six (75%) of the confirmed cases were women. Epidemiological surveys like this are very important in order to create campaigns to attract donors and reduce the costs of laboratory tests.

Multifractal geometry in analysis and processing of digital retinal photographs for early diagnosis of human diabetic macular edema.

PubMed

Tălu, Stefan

2013-07-01

The purpose of this paper is to determine a quantitative assessment of the human retinal vascular network architecture for patients with diabetic macular edema (DME). Multifractal geometry and lacunarity parameters are used in this study. A set of 10 segmented and skeletonized human retinal images, corresponding to both normal (five images) and DME states of the retina (five images), from the DRIVE database was analyzed using the Image J software. Statistical analyses were performed using Microsoft Office Excel 2003 and GraphPad InStat software. The human retinal vascular network architecture has a multifractal geometry. The average of generalized dimensions (Dq) for q = 0, 1, 2 of the normal images (segmented versions), is similar to the DME cases (segmented versions). The average of generalized dimensions (Dq) for q = 0, 1 of the normal images (skeletonized versions), is slightly greater than the DME cases (skeletonized versions). However, the average of D2 for the normal images (skeletonized versions) is similar to the DME images. The average of lacunarity parameter, Λ, for the normal images (segmented and skeletonized versions) is slightly lower than the corresponding values for DME images (segmented and skeletonized versions). The multifractal and lacunarity analysis provides a non-invasive predictive complementary tool for an early diagnosis of patients with DME.

An Automated Solution to the Multiuser Carved Data Ascription Problem

DTIC Science & Technology

2010-12-01

computer might have several authorized users. It is also common in many families, as well as in libraries, hospitals, and Internet cafes . Another way for...starting disk sector number were used in preference to features such as the Microsoft Office em- bedded “Creator” attribute. We believe that this is...with exemplars in a reference collection. 5) Validation Server: Although the technique presented in this paper is effective, it is time consuming to

Meeting human resources for health staffing goals by 2018: a quantitative analysis of policy options in Zambia.

PubMed

Tjoa, Aaron; Kapihya, Margaret; Libetwa, Miriam; Schroder, Kate; Scott, Callie; Lee, Joanne; McCarthy, Elizabeth

2010-06-30

The Ministry of Health (MOH) in Zambia is currently operating with fewer than half of the health workers required to deliver basic health services. The MOH has developed a human resources for health (HRH) strategic plan to address the crisis through improved training, hiring, and retention. However, the projected success of each strategy or combination of strategies is unclear. We developed a model to forecast the size of the public sector health workforce in Zambia over the next ten years to identify a combination of interventions that would expand the workforce to meet staffing targets. The key forecasting variables are training enrolment, graduation rates, public sector entry rates for graduates, and attrition of workforce staff. We model, using Excel (Office, Microsoft; 2007), the effects of changes in these variables on the projected number of doctors, clinical officers, nurses and midwives in the public sector workforce in 2018. With no changes to current training, hiring, and attrition conditions, the total number of doctors, clinical officers, nurses, and midwives will increase from 44% to 59% of the minimum necessary staff by 2018. No combination of changes in staff retention, graduation rates, and public sector entry rates of graduates by 2010, without including training expansion, is sufficient to meet staffing targets by 2018 for any cadre except midwives. Training enrolment needs to increase by a factor of between three and thirteen for doctors, three and four for clinical officers, two and three for nurses, and one and two for midwives by 2010 to reach staffing targets by 2018. Necessary enrolment increases can be held to a minimum if the rates of retention, graduation, and public sector entry increase to 100% by 2010, but will need to increase if these rates remain at 2008 levels. Meeting the minimum need for health workers in Zambia this decade will require an increase in health training school enrolment. Supplemental interventions targeting attrition, graduation and public sector entry rates can help close the gap. HRH modelling can help MOH policy makers determine the relative priority and level of investment needed to expand Zambia's workforce to target staffing levels.

Cost management of cleft lips under the Universal Health Coverage Program of the Tawanchai Cleft Center, Srinagarind Hospital, Faculty of Medicine, Khon Kaen University.

PubMed

Odton, Cheewarat; Rittirod, Theera; Pradubwong, Suteera; Chowchuen, Bowornsilp

2014-10-01

The study ofcost management with regard to cleft lip patients under the Universal Health Coverage Program at Tawanchai Cleft Center Srinagarind Hospital, Faculty of Medicine, Khon Kaen University, was conducted in order to provide fundamental information for the administrative team on how best to administrate and manage the organization. To study the cost management of cleft lip patients under the Universal Health Coverage Program. To compare individual patient management costs and costs from the National Health Security Office (NHSO), and to offer proper guidelines for cost management to the organization. The study was performed retrospectively. The data were collected by reviewing secondary sources of information from patients with cleft lips who consistently underwent treatment at Tawanchai Cleft Center. As for the provider prospects, the cost management did not address the other expenses. The study analyzed the comparison between cost management and income from the Universal Health Coverage Program, which it receivedfrom the National Health Security Office (NHSO). The study was conducted over 2 years (October 1, 2010 to 30 September, 2013). There were 21patients in this study. Microsoft excel was the instrument used to calculate the cost ofmanagement. (1) Total costs were lower than real payments because this cost did not take into account the total cost of the operation room, patient room, common bed, and costs of the medical equipment. Moreover the information regarding the building's price and the facility were not clear enough. The database of materials and equipment was also not yet complete. (2) The average cost ofpatient management was 12,025.14 Bahtperperson, but the compensation receivedfrom the National Health Security Office (NHSO) averaged 10,527.63 Bahtperperson, which was 87.55% ofthe total cost management. The department with the largest expenses was Anesthesia (36.42%). This study indicated that the cost of patient management is lower than usual due to the lack of clear cost information. The cost of medical care, which was received from the National Health Security Office (NHSO), was only 87.55%; the department with the highest costs was Anesthesia (36.42%).

Meeting human resources for health staffing goals by 2018: a quantitative analysis of policy options in Zambia

PubMed Central

2010-01-01

Background The Ministry of Health (MOH) in Zambia is currently operating with fewer than half of the health workers required to deliver basic health services. The MOH has developed a human resources for health (HRH) strategic plan to address the crisis through improved training, hiring, and retention. However, the projected success of each strategy or combination of strategies is unclear. Methods We developed a model to forecast the size of the public sector health workforce in Zambia over the next ten years to identify a combination of interventions that would expand the workforce to meet staffing targets. The key forecasting variables are training enrolment, graduation rates, public sector entry rates for graduates, and attrition of workforce staff. We model, using Excel (Office, Microsoft; 2007), the effects of changes in these variables on the projected number of doctors, clinical officers, nurses and midwives in the public sector workforce in 2018. Results With no changes to current training, hiring, and attrition conditions, the total number of doctors, clinical officers, nurses, and midwives will increase from 44% to 59% of the minimum necessary staff by 2018. No combination of changes in staff retention, graduation rates, and public sector entry rates of graduates by 2010, without including training expansion, is sufficient to meet staffing targets by 2018 for any cadre except midwives. Training enrolment needs to increase by a factor of between three and thirteen for doctors, three and four for clinical officers, two and three for nurses, and one and two for midwives by 2010 to reach staffing targets by 2018. Necessary enrolment increases can be held to a minimum if the rates of retention, graduation, and public sector entry increase to 100% by 2010, but will need to increase if these rates remain at 2008 levels. Conclusions Meeting the minimum need for health workers in Zambia this decade will require an increase in health training school enrolment. Supplemental interventions targeting attrition, graduation and public sector entry rates can help close the gap. HRH modelling can help MOH policy makers determine the relative priority and level of investment needed to expand Zambia's workforce to target staffing levels. PMID:20591143

Performance evaluation of the NASA/KSC CAD/CAE and office automation LAN's

NASA Technical Reports Server (NTRS)

Zobrist, George W.

1994-01-01

This study's objective is the performance evaluation of the existing CAD/CAE (Computer Aided Design/Computer Aided Engineering) network at NASA/KSC. This evaluation also includes a similar study of the Office Automation network, since it is being planned to integrate this network into the CAD/CAE network. The Microsoft mail facility which is presently on the CAD/CAE network was monitored to determine its present usage. This performance evaluation of the various networks will aid the NASA/KSC network managers in planning for the integration of future workload requirements into the CAD/CAE network and determining the effectiveness of the planned FDDI (Fiber Distributed Data Interface) migration.

Expecting excellence is key to receivable success in small and rural hospitals.

PubMed

Boucher, D

1990-06-01

Although small and rural hospitals may have trouble hiring experienced billing and collection personnel, they can succeed in keeping down receivable levels and receivable days by adopting two principles for the business office: expect excellence and inspect for excellence. These principles include setting goals for business office staff as well as listening to and implementing their ideas for more effective operations.

Valid analytical performance specifications for combined analytical bias and imprecision for the use of common reference intervals.

PubMed

Hyltoft Petersen, Per; Lund, Flemming; Fraser, Callum G; Sandberg, Sverre; Sölétormos, György

2018-01-01

Background Many clinical decisions are based on comparison of patient results with reference intervals. Therefore, an estimation of the analytical performance specifications for the quality that would be required to allow sharing common reference intervals is needed. The International Federation of Clinical Chemistry (IFCC) recommended a minimum of 120 reference individuals to establish reference intervals. This number implies a certain level of quality, which could then be used for defining analytical performance specifications as the maximum combination of analytical bias and imprecision required for sharing common reference intervals, the aim of this investigation. Methods Two methods were investigated for defining the maximum combination of analytical bias and imprecision that would give the same quality of common reference intervals as the IFCC recommendation. Method 1 is based on a formula for the combination of analytical bias and imprecision and Method 2 is based on the Microsoft Excel formula NORMINV including the fractional probability of reference individuals outside each limit and the Gaussian variables of mean and standard deviation. The combinations of normalized bias and imprecision are illustrated for both methods. The formulae are identical for Gaussian and log-Gaussian distributions. Results Method 2 gives the correct results with a constant percentage of 4.4% for all combinations of bias and imprecision. Conclusion The Microsoft Excel formula NORMINV is useful for the estimation of analytical performance specifications for both Gaussian and log-Gaussian distributions of reference intervals.

Assessment of refractive outcome of femtosecond-assisted LASIK for hyperopia correction

PubMed Central

El-Naggar, Mohamed Tarek; Hovaghimian, Dikran Gilbert

2017-01-01

Introduction Laser vision correction for hyperopia is challenging. The purpose of the study was to assess the refractive outcomes of femtosecond-assisted laser in situ keratomileusis (LASIK) for hyperopic correction using wavefront-optimized ablation profiles. Methods This retrospective case series study included 20 Egyptian patients (40 eyes) with hyperopia or hyperopic astigmatism with a mean manifest refraction spherical equivalent (MRSE) of +2.55D±1.17 (range from +1.00 to +6.00) who had uneventful femtosecond-a assisted LASIK with wavefront-optimized aspheric ablation profile using refractive surgery suite (WaveLight FS200 Femtosecond Laser and WaveLight EX500 Excimer Laser) performed in the Research Institute of Ophthalmology and International Eye Hospital, Giza, Egypt. Statistical analysis was done using Microsoft Excel (Microsoft Corporation, Seattle, WA, USA). Results The procedure significantly reduced the MRSE and cylinder post-operatively (95% were ± 0.50D and 100% ± 1.00 D), with stability of refraction and UDVA over the follow-up period (up to 12 months) after surgery. No eye lost any line of the CDVA, which reflects the excellent safety profile of the procedure; on the other hand, one eye (5%) gained one line and one eye (5%) even gained two lines. There were no significant complications during the procedure. Conclusions Femtosecond-assisted laser in situ keratomileusis for hyperopia showed predictable, effective, and safe refractive outcomes that were stable through 12 months. Longer follow-up period is required to detect any further regression PMID:28461870

Pharmaceutical interventions in medications prescribed for administration via enteral tubes in a teaching hospital.

PubMed

Ferreira, Carolina Justus Buhrer; Plodek, Caroline Koga; Soares, Franciny Kossemba; Andrade, Rayza Assis de; Teleginski, Fernanda; Rocha, Maria Dagmar da

2016-01-01

to analyze the impact of guidelines regarding errors in medications prescribed for administration through enteral tubes. quantitative study, in three phases, undertaken in internal medicine, neurology and an intensive care unit in a general teaching hospital. In Phase 1, the following was undertaken: a protocol for dilution and unit-dose repackaging and administration for 294 medications via enteral tubes; a decision flowchart; operational-standard procedures for dilution and unit-dose repackaging of oral pharmaceutical forms and for administration of medications through enteral tubes. In phase 2, errors in 872 medications prescribed through enteral tubes, in 293 prescriptions for patients receiving inpatient treatment between March and June, were investigated. This was followed by training of the teams in relation to the guidelines established. In Phase 3, pharmaceutical errors and interventions in 945 medications prescribed through enteral tubes, in 292 prescriptions of patients receiving inpatient treatment between August and September, were investigated prospectively. The data collected, in a structured questionnaire, were compiled in the Microsoft Office Excel(r) program, and frequencies were calculated. 786 errors were observed, 63.9% (502) in Phase 2, and 36.1% (284) in Phase 3. In Phase 3, a reduction was ascertained in the frequency of prescription of medications delivered via enteral tubes, medications which were contraindicated, and those for which information was not available. guidelines and pharmaceutical interventions were determined in the prevention of errors involving medications delivered through enteral tubes. analisar o impacto de diretrizes sobre erros em medicamentos prescritos para administração via sondas enterais. estudo quantitativo, em três fases, realizado em clínica médica, neurologia e unidade de terapia intensiva de hospital geral universitário. Na Fase 1 elaborou-se: protocolo de diluição, unitarização - transformação e administração para 294 medicamentos via sondas enterais; fluxograma decisório; procedimentos operacionais-padrão de diluição e unitarização de formas farmacêuticas orais e de administração de medicamentos via sondas enterais. Na Fase 2 investigou-se, retrospectivamente, erros em 872 medicamentos prescritos via sondas enterais, em 293 prescrições de pacientes internados de março a junho. Seguiu-se capacitação das equipes sobre diretrizes estabelecidas. Na Fase 3 investigou-se, prospectivamente, erros e intervenções farmacêuticas em 945 medicamentos prescritos via sondas enterais, em 292 prescrições de pacientes internados de agosto a setembro. Dados coletados, em formulário estruturado, foram compilados no programa Microsoft Office Excel(r) e calculadas as frequências. foram observados 786 erros, 63,9% (502) na Fase 2 e 36,1% (284) na Fase 3. Na Fase 3 verificou-se redução na frequência de prescrição de medicamentos, via sondas enterais, contraindicados e sem informações disponíveis. diretrizes e intervenções farmacêuticas foram determinantes na prevenção dos erros de medicamentos via sondas enterais. analizar el impacto de directrices sobre errores en medicamentos prescritos para administración vía sondas enterales. estudio cuantitativo, en tres fases, realizado en una clínica médica-neurología y en unidad de terapia intensiva de un hospital general universitario. En la Fase 1 se elaboró: protocolo de dilución, reenvasado - transformación y administración para 294 medicamentos vía sondas enterales; diagrama de flujo de decisión; procedimientos operacionales estándar de dilución y reenvasado - transformación de formas farmacéuticas orales y de administración de medicamentos vía sondas enterales. En la Fase 2 se investigó, retrospectivamente, errores en 872 medicamentos prescritos vía sondas enterales, en 293 prescripciones de pacientes internados de marzo a junio. La continuación, capacitación de los equipos sobre directrices establecidas. En la Fase 3 se investigó, prospectivamente, errores e intervenciones farmacéuticas en 945 medicamentos prescritos vía sondas enterales, en 292 prescripciones de pacientes internados de agosto a septiembre. Datos fueron colectados en un formulario estructurado, compilados en el programa Microsoft Office Excel(r) y se calcularon las frecuencias. se observaron 786 errores, 63,9% (502) en la Fase 2 y 36,1% (284) en la Fase 3. En la Fase 3 se verificó una reducción en la frecuencia de prescripción de medicamentos, vía sondas enterales, contraindicados y sin informaciones disponibles. las directrices e intervenciones farmacéuticas fueron determinantes en la prevención de los errores de medicamentos vía sondas enterales.

Escape Excel: A tool for preventing gene symbol and accession conversion errors

PubMed Central

Stewart, Paul A.; Kuenzi, Brent M.; Eschrich, James A.

2017-01-01

Background Microsoft Excel automatically converts certain gene symbols, database accessions, and other alphanumeric text into dates, scientific notation, and other numerical representations. These conversions lead to subsequent, irreversible, corruption of the imported text. A recent survey of popular genomic literature estimates that one-fifth of all papers with supplementary gene lists suffer from this issue. Results Here, we present an open-source tool, Escape Excel, which prevents these erroneous conversions by generating an escaped text file that can be safely imported into Excel. Escape Excel is implemented in a variety of formats (http://www.github.com/pstew/escape_excel), including a command line based Perl script, a Windows-only Excel Add-In, an OS X drag-and-drop application, a simple web-server, and as a Galaxy web environment interface. Test server implementations are accessible as a Galaxy interface (http://apostl.moffitt.org) and simple non-Galaxy web server (http://apostl.moffitt.org:8000/). Conclusions Escape Excel detects and escapes a wide variety of problematic text strings so that they are not erroneously converted into other representations upon importation into Excel. Examples of problematic strings include date-like strings, time-like strings, leading zeroes in front of numbers, and long numeric and alphanumeric identifiers that should not be automatically converted into scientific notation. It is hoped that greater awareness of these potential data corruption issues, together with diligent escaping of text files prior to importation into Excel, will help to reduce the amount of Excel-corrupted data in scientific analyses and publications. PMID:28953918

Nonlinear least-squares data fitting in Excel spreadsheets.

PubMed

Kemmer, Gerdi; Keller, Sandro

2010-02-01

We describe an intuitive and rapid procedure for analyzing experimental data by nonlinear least-squares fitting (NLSF) in the most widely used spreadsheet program. Experimental data in x/y form and data calculated from a regression equation are inputted and plotted in a Microsoft Excel worksheet, and the sum of squared residuals is computed and minimized using the Solver add-in to obtain the set of parameter values that best describes the experimental data. The confidence of best-fit values is then visualized and assessed in a generally applicable and easily comprehensible way. Every user familiar with the most basic functions of Excel will be able to implement this protocol, without previous experience in data fitting or programming and without additional costs for specialist software. The application of this tool is exemplified using the well-known Michaelis-Menten equation characterizing simple enzyme kinetics. Only slight modifications are required to adapt the protocol to virtually any other kind of dataset or regression equation. The entire protocol takes approximately 1 h.

Electronic Mail (E-Mail) Management and Use

DTIC Science & Technology

1999-03-01

age or date of birth ; present or 14 AFI33-119 1 MARCH 1999future assignments for overseas, or for routinely deployable or sensitive units; and office...Server Naming Convention. The DMS-AF primary (e.g., ESL® Primary, Lotus ® Hub, and Microsoft® Bridgehead) server and its backup must conform to the 8...determine if there is some benefit to establishing standard lower-level folder names which bases should adhere to. Standard public folders offer a

Program for Generating Graphs and Charts

NASA Technical Reports Server (NTRS)

Ackerson, C. T.

1986-01-01

Office Automation Pilot (OAP) Graphics Database system offers IBM personal computer user assistance in producing wide variety of graphs and charts and convenient data-base system, called chart base, for creating and maintaining data associated with graphs and charts. Thirteen different graphics packages available. Access graphics capabilities obtained in similar manner. User chooses creation, revision, or chartbase-maintenance options from initial menu; Enters or modifies data displayed on graphic chart. OAP graphics data-base system written in Microsoft PASCAL.

Demagnetization Analysis in Excel (DAIE) - An open source workbook in Excel for viewing and analyzing demagnetization data from paleomagnetic discrete samples and u-channels

NASA Astrophysics Data System (ADS)

Sagnotti, Leonardo

2013-04-01

Modern rock magnetometers and stepwise demagnetization procedures result in the production of large datasets, which need a versatile and fast software for their display and analysis. Various software packages for paleomagnetic analyses have been recently developed to overcome the problems linked to the limited capability and the loss of operability of early codes written in obsolete computer languages and/or platforms, not compatible with modern 64 bit processors. The Demagnetization Analysis in Excel (DAIE) workbook is a new software that has been designed to make the analysis of demagnetization data easy and accessible on an application (Microsoft Excel) widely diffused and available on both the Microsoft Windows and Mac OS X operating systems. The widespread diffusion of Excel should guarantee a long term working life, since compatibility and functionality of current Excel files should be most likely maintained during the development of new processors and operating systems. DAIE is designed for viewing and analyzing stepwise demagnetization data of both discrete and u-channel samples. DAIE consists of a single file and has an open modular structure organized in 10 distinct worksheets. The standard demagnetization diagrams and various parameters of common use are shown on the same worksheet including selectable parameters and user's choices. The remanence characteristic components may be computed by principal component analysis (PCA) on a selected interval of demagnetization steps. Saving of the PCA data can be done both sample by sample, or in automatic by applying the selected choices to all the samples included in the file. The DAIE open structure allows easy personalization, development and improvement. The workbook has the following features which may be valuable for various users: - Operability in nearly all the computers and platforms; - Easy inputs of demagnetization data by "copy and paste" from ASCII files; - Easy export of computed parameters and demagnetization plots; - Complete control of the whole workflow and possibility of implementation of the workbook by any user; - Modular structure in distinct worksheets for each type of analyses and plots, in order to make implementation and personalization easier; - Opportunity to use the workbook for educational purposes, since all the computations and analyses are easily traceable and accessible; - Automatic and fast analysis of a large batch of demagnetization data, such as those measured on u-channel samples. The DAIE workbook and the "User manual" are available for download on a dedicated web site (http://roma2.rm.ingv.it/en/facilities/software/49/daie).

Optimizing the patient transport function at Mayo Clinic.

PubMed

Kuchera, Dustin; Rohleder, Thomas R

2011-01-01

In this article, we report on the implementation of a computerized scheduling tool to optimize staffing for patient transport at the Mayo Clinic. The tool was developed and implemented in Microsoft Excel and Visual Basic for Applications and includes an easy-to-use interface. The tool allows transport management to consider the trade-offs between patient waiting time and staffing levels. While improved staffing efficiency was a desire of the project, it was important that patient service quality was also maintained. The results show that staffing could be reduced while maintaining historical patient service levels.

Whole-rock and glass major-element geochemistry of Kilauea Volcano, Hawaii, near-vent eruptive products: September 1994 through September 2001

USGS Publications Warehouse

Thornber, Carl R.; Sherrod, David R.; Siems, David F.; Heliker, Christina C.; Meeker, Gregory P.; Oscarson, Robert L.; Kauahikaua, James P.

2002-01-01

This report presents major-element geochemical data for glasses and whole-rock aliquots among 523 lava samples collected near the vent on Kilauea's east rift zone between September 1994 and October 2001. Information on sample collection, analysis techniques and analytical standard reproducibility are presented as a PDF file, which also includes a detailed explantion of the categories of sample information presented in the database spreadsheet. The sample database is downloadable as a separate Microsoft Excel file.

Shape optimization of the modular press body

NASA Astrophysics Data System (ADS)

Pabiszczak, Stanisław

2016-12-01

A paper contains an optimization algorithm of cross-sectional dimensions of a modular press body for the minimum mass criterion. Parameters of the wall thickness and the angle of their inclination relative to the base of section are assumed as the decision variables. The overall dimensions are treated as a constant. The optimal values of parameters were calculated using numerical method of the tool Solver in the program Microsoft Excel. The results of the optimization procedure helped reduce body weight by 27% while maintaining the required rigidity of the body.

1H NMR spectra dataset and solid-state NMR data of cowpea (Vigna unguiculata).

PubMed

Alves Filho, Elenilson G; Silva, Lorena M A; Teofilo, Elizita M; Larsen, Flemming H; de Brito, Edy S

2017-04-01

In this article the NMR data from chemical shifts, coupling constants, and structures of all the characterized compounds were provided, beyond a complementary PCA evaluation for the corresponding manuscript (E.G. Alves Filho, L.M.A. Silva, E.M. Teofilo, F.H. Larsen, E.S. de Brito, 2017) [3]. In addition, a complementary assessment from solid-state NMR data was provided. For further chemometric analysis, numerical matrices from the raw 1 H NMR data were made available in Microsoft Excel workbook format (.xls).

Object-oriented software for evaluating measurement uncertainty

NASA Astrophysics Data System (ADS)

Hall, B. D.

2013-05-01

An earlier publication (Hall 2006 Metrologia 43 L56-61) introduced the notion of an uncertain number that can be used in data processing to represent quantity estimates with associated uncertainty. The approach can be automated, allowing data processing algorithms to be decomposed into convenient steps, so that complicated measurement procedures can be handled. This paper illustrates the uncertain-number approach using several simple measurement scenarios and two different software tools. One is an extension library for Microsoft Excel®. The other is a special-purpose calculator using the Python programming language.

77 FR 2711 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-19

... DEPARTMENT OF EDUCATION Equity and Excellence Commission AGENCY: Office for Civil Rights, Education. ACTION: Notice of open meeting (Amended). SUMMARY: On January 5, 2012, the Office for Civil... will participate in an Ethics briefing prior to the start of the January 23rd meeting This notice sets...

Development of a forestry government agency enterprise GIS system: a disconnected editing approach

NASA Astrophysics Data System (ADS)

Zhu, Jin; Barber, Brad L.

2008-10-01

The Texas Forest Service (TFS) has developed a geographic information system (GIS) for use by agency personnel in central Texas for managing oak wilt suppression and other landowner assistance programs. This Enterprise GIS system was designed to support multiple concurrent users accessing shared information resources. The disconnected editing approach was adopted in this system to avoid the overhead of maintaining an active connection between TFS central Texas field offices and headquarters since most field offices are operating with commercially provided Internet service. The GIS system entails maintaining a personal geodatabase on each local field office computer. Spatial data from the field is periodically up-loaded into a central master geodatabase stored in a Microsoft SQL Server at the TFS headquarters in College Station through the ESRI Spatial Database Engine (SDE). This GIS allows users to work off-line when editing data and requires connecting to the central geodatabase only when needed.

CAHOST: An Excel Workbook for Facilitating the Johnson-Neyman Technique for Two-Way Interactions in Multiple Regression.

PubMed

Carden, Stephen W; Holtzman, Nicholas S; Strube, Michael J

2017-01-01

When using multiple regression, researchers frequently wish to explore how the relationship between two variables is moderated by another variable; this is termed an interaction. Historically, two approaches have been used to probe interactions: the pick-a-point approach and the Johnson-Neyman (JN) technique. The pick-a-point approach has limitations that can be avoided using the JN technique. Currently, the software available for implementing the JN technique and creating corresponding figures lacks several desirable features-most notably, ease of use and figure quality. To fill this gap in the literature, we offer a free Microsoft Excel 2013 workbook, CAHOST (a concatenation of the first two letters of the authors' last names), that allows the user to seamlessly create publication-ready figures of the results of the JN technique.

CaveMan Enterprise version 1.0 Software Validation and Verification.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, David

The U.S. Department of Energy Strategic Petroleum Reserve stores crude oil in caverns solution-mined in salt domes along the Gulf Coast of Louisiana and Texas. The CaveMan software program has been used since the late 1990s as one tool to analyze pressure mea- surements monitored at each cavern. The purpose of this monitoring is to catch potential cavern integrity issues as soon as possible. The CaveMan software was written in Microsoft Visual Basic, and embedded in a Microsoft Excel workbook; this method of running the CaveMan software is no longer sustainable. As such, a new version called CaveMan Enter- prisemore » has been developed. CaveMan Enterprise version 1.0 does not have any changes to the CaveMan numerical models. CaveMan Enterprise represents, instead, a change from desktop-managed work- books to an enterprise framework, moving data management into coordinated databases and porting the numerical modeling codes into the Python programming language. This document provides a report of the code validation and verification testing.« less

Human-System Integration Scorecard Update to VB.Net

NASA Technical Reports Server (NTRS)

Sanders, Blaze D.

2009-01-01

The purpose of this project was to create Human-System Integration (HSI) scorecard software, which could be utilized to validate that human factors have been considered early in hardware/system specifications and design. The HSI scorecard is partially based upon the revised Human Rating Requirements (HRR) intended for NASA's Constellation program. This software scorecard will allow for quick appraisal of HSI factors, by using visual aids to highlight low and rapidly changing scores. This project consisted of creating a user-friendly Visual Basic program that could be easily distributed and updated, to and by fellow colleagues. Updating the Microsoft Word version of the HSI scorecard to a computer application will allow for the addition of useful features, improved easy of use, and decreased completion time for user. One significant addition is the ability to create Microsoft Excel graphs automatically from scorecard data, to allow for clear presentation of problematic areas. The purpose of this paper is to describe the rational and benefits of creating the HSI scorecard software, the problems and goals of project, and future work that could be done.

Training in software used by practising engineers should be included in university curricula

NASA Astrophysics Data System (ADS)

Silveira, A.; Perdigones, A.; García, J. L.

2009-04-01

Deally, an engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that synergistically combine creativity and imagination with rigour and discipline. Recently, pressures on curricula have resulted in the development of software-specific courses, often to the detriment of the understanding of theory [1]. However, it is also true that there is a demand for information technology courses by students other than computer science majors [2]. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities [3]. Training in the use of certain computer programs may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which computer programs are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. The results showed that 72% of their working hours involved the use computer programs. The software packages most commonly used were Microsoft Office (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of Microsoft Excel, budgeting and engineering software. The results of this survey underline the importance of computer software training in this and perhaps other fields of engineering. [1] D. J. Moore, and D. R. Voltmer, "Curriculum for an engineering renaissance," IEEE Trans. Educ., vol. 46, pp. 452-455, Nov. 2003. [2] N. Kock, R. Aiken, and C. Sandas, "Using complex IT in specific domains: developing and assessing a course for nonmajors," IEEE Trans. Educ., vol. 45, pp. 50- 56, Feb. 2002. [3] I. Vélez, and J. F. Sevillano, "A course to train digital hardware designers for industry," IEEE Trans. Educ., vol. 50, pp. 236-243, Aug. 2007. Acknowledgement: This work was supported in part by the Universidad Politécnica de Madrid, Spain.

Safety and efficacy of office-based surgery with monitored anesthesia care/sedation in 4778 consecutive plastic surgery procedures.

PubMed

Bitar, George; Mullis, William; Jacobs, William; Matthews, David; Beasley, Michael; Smith, Kevin; Watterson, Paul; Getz, Stanley; Capizzi, Peter; Eaves, Felmont

2003-01-01

Office-based surgery has several potential benefits over hospital-based surgery, including cost containment, ease of scheduling, and convenience to both patients and surgeons. Scrutiny of office-based surgery by regulators and state-licensing agencies has increased and must be addressed by improved documentation of safety and efficacy. To evaluate the safety and efficacy of the authors' office-based plastic surgery, a review was undertaken of 3615 consecutive patients undergoing 4778 outpatient plastic surgery procedures under monitored anesthesia care/sedation in a single office. The charts of 3615 consecutive patients who had undergone office-based surgery with monitored anesthesia care/sedation between May of 1995 and May of 2000 were reviewed. In all cases, the anesthesia protocol used included sedation with midazolam, propofol, and a narcotic administered by a board-certified registered nurse anesthetist with local anesthesia provided by the surgeon. Charts were reviewed for patient profile, types of procedures, multiple procedures, duration of anesthesia, American Society of Anesthesiologists class, and complications related to anesthesia. Outcomes measured included death, airway compromise, dyspnea, hypotension, venous thrombosis, pulmonary emboli, protracted nausea and vomiting lasting more than 24 hours, and unplanned hospital admissions. Statistical analyses were performed using the Microsoft Excel program and the SAS package. Results were as follows: 92.3 percent of the patients were female and 7.7 percent were male, with a mean age of 42.7 years (range, 3 to 83 years). Patients underwent aesthetic (95.6 percent) and reconstructive (4.4 percent) plastic surgery procedures. Same-session multiple procedures occurred in 24.8 percent of patients. The vast majority of patients were healthy: 84.3 percent of patients were American Society of Anesthesiologists class I, 15.6 percent were class II, and 0.1 percent were class III. The operations required a mean of 111 minutes. There were no deaths, ventilator requirements, deep venous thromboses, or pulmonary emboli. Complications were as follows: 0.05 percent (n = 2) of patients had dyspnea that resolved, 0.2 percent (n = 6) of patients had protracted nausea and vomiting, and 0.05 percent (n = 2) of patients had unplanned hospital admissions (<24 hours). One patient had an emergent intubation. No prolonged adverse effects were noted. There was a 30-day follow-up minimum. Outpatient surgery is an important aspect of plastic surgery. It was shown that office-based surgery with intravenous sedation, performed by board-certified plastic surgeons and nurse anesthetists, is safe. Appropriate accreditation, safe anesthesia protocols, and proper patient selection constitute the basis for safe and efficacious office-based outpatient plastic surgery.

Graphical User Interface for Simulink Integrated Performance Analysis Model

NASA Technical Reports Server (NTRS)

Durham, R. Caitlyn

2009-01-01

The J-2X Engine (built by Pratt & Whitney Rocketdyne,) in the Upper Stage of the Ares I Crew Launch Vehicle, will only start within a certain range of temperature and pressure for Liquid Hydrogen and Liquid Oxygen propellants. The purpose of the Simulink Integrated Performance Analysis Model is to verify that in all reasonable conditions the temperature and pressure of the propellants are within the required J-2X engine start boxes. In order to run the simulation, test variables must be entered at all reasonable values of parameters such as heat leak and mass flow rate. To make this testing process as efficient as possible in order to save the maximum amount of time and money, and to show that the J-2X engine will start when it is required to do so, a graphical user interface (GUI) was created to allow the input of values to be used as parameters in the Simulink Model, without opening or altering the contents of the model. The GUI must allow for test data to come from Microsoft Excel files, allow those values to be edited before testing, place those values into the Simulink Model, and get the output from the Simulink Model. The GUI was built using MATLAB, and will run the Simulink simulation when the Simulate option is activated. After running the simulation, the GUI will construct a new Microsoft Excel file, as well as a MATLAB matrix file, using the output values for each test of the simulation so that they may graphed and compared to other values.

The structure of the pharmaceutical market in Iran using concentration indices

PubMed Central

Mohseni, Mohammad; Gorji, Hasan Abolghasem; Ahadinezhad, Bahman; Khosravizadeh, Omid; Keykaleh, Meysam Safi; Moosavi, Ahmad; Mohtashamzadeh, Bahareh

2017-01-01

Background and objective The efficiency and function of the pharmaceutical sector, as a vital portion of the health system, have a significant effect on intermediate and final indices of health. In this research, the structure of the pharmaceutical market in Iran was examined through the calculation of concentration indices in 2011. Methods In this cross-sectional study, the needed data was gathered from the Food and Drug Administration in the year 2011. Data were analyzed using SPSS software version 20 and Microsoft Office Excel software. Finally, two common measures of market concentration, the Concentration Ratio and the Herfindahl-Hirschman Index, were calculated. Results The largest and the smallest shares of the industry were 5.57% and 0.01%, respectively. The average industry share was 1.09%. The share range was calculated to be 5.56%. The Herfindahl-Hirschman Index was 248.5, which indicates a very low concentration of the pharmaceutical market in Iran. Also, based on the Concentration Ratio of 4 companies (18.39%), the concentration of the pharmaceutical market has been too low. Conclusion The pharmaceutical market in Iran has a very low concentration and it does not have an exclusive mode in terms of market structure. Therefore, it can be attributed to the competitive model. The policy makers in this area can use this characteristic as a leverage to improve efficiency, fairness, revenue and health indices. PMID:28607663

The structure of the pharmaceutical market in Iran using concentration indices.

PubMed

Mohseni, Mohammad; Gorji, Hasan Abolghasem; Ahadinezhad, Bahman; Khosravizadeh, Omid; Keykaleh, Meysam Safi; Moosavi, Ahmad; Mohtashamzadeh, Bahareh

2017-04-01

The efficiency and function of the pharmaceutical sector, as a vital portion of the health system, have a significant effect on intermediate and final indices of health. In this research, the structure of the pharmaceutical market in Iran was examined through the calculation of concentration indices in 2011. In this cross-sectional study, the needed data was gathered from the Food and Drug Administration in the year 2011. Data were analyzed using SPSS software version 20 and Microsoft Office Excel software. Finally, two common measures of market concentration, the Concentration Ratio and the Herfindahl-Hirschman Index, were calculated. The largest and the smallest shares of the industry were 5.57% and 0.01%, respectively. The average industry share was 1.09%. The share range was calculated to be 5.56%. The Herfindahl-Hirschman Index was 248.5, which indicates a very low concentration of the pharmaceutical market in Iran. Also, based on the Concentration Ratio of 4 companies (18.39%), the concentration of the pharmaceutical market has been too low. The pharmaceutical market in Iran has a very low concentration and it does not have an exclusive mode in terms of market structure. Therefore, it can be attributed to the competitive model. The policy makers in this area can use this characteristic as a leverage to improve efficiency, fairness, revenue and health indices.

Assessment of municipal solid waste generation and recyclable materials potential in Kuala Lumpur, Malaysia.

PubMed

Saeed, Mohamed Osman; Hassan, Mohd Nasir; Mujeebu, M Abdul

2009-07-01

This paper presents a forecasting study of municipal solid waste generation (MSWG) rate and potential of its recyclable components in Kuala Lumpur (KL), the capital city of Malaysia. The generation rates and composition of solid wastes of various classes such as street cleansing, landscape and garden, industrial and constructional, institutional, residential and commercial are analyzed. The past and present trends are studied and extrapolated for the coming years using Microsoft office 2003 Excel spreadsheet assuming a linear behavior. The study shows that increased solid waste generation of KL is alarming. For instance, the amount of daily residential SWG is found to be about 1.62 kg/capita; with the national average at 0.8-0.9 kg/capita and is expected to be increasing linearly, reaching to 2.23 kg/capita by 2024. This figure seems reasonable for an urban developing area like KL city. It is also found that, food (organic) waste is the major recyclable component followed by mix paper and mix plastics. Along with estimated population growth and their business activities, it has been observed that the city is still lacking in terms of efficient waste treatment technology, sufficient fund, public awareness, maintaining the established norms of industrial waste treatment etc. Hence it is recommended that the concerned authority (DBKL) shall view this issue seriously.

[Evaluation of the management of erectile and ejaculatory dysfunction in a series of 90 patients with spinal cord injuries].

PubMed

Hadiji, N; Benbouzid, R; Previnaire, J G; Leblond, C; Mieusset, R; Enjalbert, M; Soler, J M

2013-12-01

To evaluate the erectile dysfunction and ejaculatory on patients injured in conus medullaris (CMI) and the efficacy of treatment. Ninety patients with injured conus medullaris underwent a retrospective and monocentric study. They have all an assessment of erectile dysfunction and ejaculatory by the International Index of Erectile Function (IIEF-15) and a clinic scenario. We evaluated the erection by a clinical scoring scale (Shrameck). Seventy-seven out of 90 (85.55%) had therapeutic tests to restore erection: prostaglandin (PGE1), phosphodiesterase type 5 inhibitors (PDE5) and Papaverine. Seventy-four out of 90 (82.22%) underwent a penile stimulation tests (VM) more or less associated with Midodrine(®) (alpha mimetic) to cause ejaculation with a systematic search of spermatozoa in urine. Data were entered and analyzed using Microsoft Office Excel. Ninety patients with a complete lesion of the sacral metameres (S2S3S4) were included. They were responding to PGE1, PDE5, respectively 81.63% and 30.76%. The association VM/Midodrine(®) improves ejaculation in 52.63% of cases. Orgasm is absent in all our CMI. In this series of BCM patients, we observed a good efficacy of PGE1 and PDE 5 on erection. We also observed positive results of vibromassage and alpha-agonists on ejaculation. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Epidemiology and trend of common cancers in Iran (2004-2008).

PubMed

Amori, N; Aghajani, M; Asgarian, F S; Jazayeri, M

2017-09-01

Cancer is one of the most important causes of mortality worldwide. It includes approximately 13% of death cases. This study aimed to investigate the incidence trend of common cancers in Iran during 2004-2008 to improve reporting distribution the disease. This was a retrospective study. The study population was all cases of cancer diagnosed in Iran during 2004-2008. The crude incidence rate of cancers was calculated per 100 000 people by age groups and sex. Age-standardised incidence rates (ASRs) were calculated using direct standardisation and the world standard population. Data were analysed using SPSS (version 17) and Microsoft Office Excel 2007. In this study, a total of 301 055 cases of cancer were diagnosed. ASRs were 60.51 and 84.51 in women and men respectively. Most common cancers in men were skin (ASR = 18.85), stomach (15.02), bladder (ASR = 11.25), prostate (ASR = 8.93) and colorectal (ASR = 8.29). Most common cancers in women were breast (ASR = 18.24), skin (ASR = 12.01), colorectal (ASR = 7.75), stomach (ASR = 7.05) and haematocyte (ASR = 4.01). A significant increase was observed in the incidence of cancers in the country. Therefore, it is necessary to perform screening, early diagnosis and treatment in early stages of cancers. © 2016 John Wiley & Sons Ltd.

KNOWLEDGE OF PUERPERAL MOTHERS ABOUT THE GUTHRIE TEST.

PubMed

Arduini, Giovanna Abadia Oliveira; Balarin, Marly Aparecida Spadotto; Silva-Grecco, Roseane Lopes da; Marqui, Alessandra Bernadete Trovó de

2017-01-01

This study aimed to assess the knowledge of puerperal mothers about the Guthrie test. A total of 75 mothers who sought primary care between October 2014 and February 2015 were investigated. The form was applied by the main researcher and the data was analyzed, using descriptive statistics with Microsoft Office Excel, and Statistical Package for Social Sciences (SPSS) programs. Association tests and statistical power were applied. Among the 75 mothers, 47 (62.7%) would have liked to receive more information about the newborn screening, especially regarding the correct sample collection period, followed by the screened morbidities. Most participants (n=55; 85.9%) took their children to be tested between the third and the seventh day of birth, as recommended by the Brazilian Health Ministry. Fifty-four women (72%) were unable to name the morbidities screened by the test in Minas Gerais, and they were also unaware that most have genetic etiology. The health professional who informed the mother about the Guthrie test was mainly the physician. This information was given prenatally to 57% of the cases, and to 43 % at the time of discharge from the hospital. The association test showed that mothers with higher education have more knowledge about the purpose and importance of the Guthrie test. The statistical power was 83.5%. Maternal knowledge about the Guthrie test is superficial and may reflect the health team's usual practice.

Cesarean Section Rate Analysis in University Hospital Tuzla - According to Robson's Classification.

PubMed

Fatusic, Jasenko; Hudic, Igor; Fatusic, Zlatan; Zildzic-Moralic, Aida; Zivkovic, Milorad

2016-06-01

For last decades, there has public concern about increasing Cesarean Section (CS) rates, and it is an issue of international public health concern. According to World Health Organisation (WHO) there is no justification to have more than 10-15% CS births. WHO proposes the Robson ten-group classification, as a global standard for assessing, monitoring and comparing cesarean section rates. The aim of this study was to investigate Cesarean section rate at University Hospital Tuzla, Bosnia and Herzegovina. Cross sectional study was conducted for one-year period, 2015. Statistical analysis and graph-table presentation was performed using Excel 2010 and Microsoft Office programs. Out of 3,672 births, a total of 936 births were performed by CS. Percentage of the total number of CS to the total birth number was 25,47%. According to Robson classification, the largest was group 5 with relative contribution of 29,80%. On second and third place were group 1 and 2 with relative contribution of 26,06% and 15,78% respectively. Groups 1, 2, 5 made account of realtive contribution of 71,65%. All other groups had entirely relative contribution of 28,35%. Robson 10-group classification provides easy way in collecting information about CS rate. It is important that efforts to reduce the overall CS rate should focus on reducing the primary CS. Data from our study confirm this attitude.

Prevalence of human T-cell lymphotropic virus types 1 and 2 in blood donors of the Caruaru Blood Center (Hemope)

PubMed Central

de Lima, Waleska Mayara Gomes; Esteves, Fabrício Andrade Martins; Torres, Maria do Carmo Morais Rodrigues; Pires, Edna Suely Feitosa

2013-01-01

Background There is difficulty in gathering data on the prevalence of human T-cell lymphotropic virus in blood donors as confirmatory testing is not mandatory in Brazil. This suggests there may be an underreporting of the prevalence. Objective To estimate the prevalence of human T-cell lymphotropic virus types 1 and 2 in donors of a blood bank in Caruaru, Brazil. Methods This was an observational, epidemiological, descriptive, longitudinal and retrospective study with information about the serology of donors of the Caruaru Blood Center, Fundação de Hematologia e Hemoterapia de Pernambuco (Hemope) from May 2006 to December 2010. The data were analyzed using the Excel 2010 computer program (Microsoft Office®). Results Of 61,881 donors, 60 (0.096%) individuals were identified as potential carriers of human T-cell lymphotropic virus types 1 and 2. Of these, 28 (0.045%) were positive and 32 (0.051%) had inconclusive results in the serological screening. Forty-five (0.072%) were retested; 17 were positive (0.027%) and 3 inconclusive (0.005%). After confirmatory tests, 8 were positive (0.013%). Six (75%) of the confirmed cases were women. Conclusion Epidemiological surveys like this are very important in order to create campaigns to attract donors and reduce the costs of laboratory tests. PMID:24106445

75 FR 48661 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

... DEPARTMENT OF EDUCATION Equity and Excellence Commission AGENCY: U.S. Department of Education, Office for Civil Rights. ACTION: Notice of Establishment of the Equity and Excellence Commission. SUMMARY: The U.S. Secretary of Education (Secretary) announces the establishment of the Equity and Excellence...

75 FR 4822 - 2010 Travel and Relocation Excellence Award

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

... GENERAL SERVICES ADMINISTRATION 2010 Travel and Relocation Excellence Award AGENCY: Office of... Administration (GSA) is seeking candidates for the biennial 2010 Travel and Relocation Excellence Award, which honors excellence in federal travel and relocation policy. FOR FURTHER INFORMATION CONTACT: Go to GSA's...

What It Takes to Excel as a Physician Executive in Healthcare Today.

ERIC Educational Resources Information Center

Bachrach, David J.

1998-01-01

As the health care system changes, new opportunities for physician executives include chief medical officer, director of medical education, health insurance compliance officer, utilization review officer, chief medical information officer, and chief executive officer of the physician-hospital organization. (JOW)

ARS-Media for Excel: A Spreadsheet Tool for Calculating Media Recipes Based on Ion-Specific Constraints

PubMed Central

Niedz, Randall P.

2016-01-01

ARS-Media for Excel is an ion solution calculator that uses “Microsoft Excel” to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Excel’s Solver add-on solves the linear programming equation to generate a recipe. Calculating a mixture of salts to generate exact solutions of complex ionic mixtures is required for at least 2 types of problems– 1) formulating relevant ecological/biological ionic solutions such as those from a specific lake, soil, cell, tissue, or organ and, 2) designing ion confounding-free experiments to determine ion-specific effects where ions are treated as statistical factors. Using ARS-Media for Excel to solve these two problems is illustrated by 1) exactly reconstructing a soil solution representative of a loamy agricultural soil and, 2) constructing an ion-based experiment to determine the effects of substituting Na+ for K+ on the growth of a Valencia sweet orange nonembryogenic cell line. PMID:27812202

Addressing fluorogenic real-time qPCR inhibition using the novel custom Excel file system 'FocusField2-6GallupqPCRSet-upTool-001' to attain consistently high fidelity qPCR reactions

PubMed Central

Ackermann, Mark R.

2006-01-01

The purpose of this manuscript is to discuss fluorogenic real-time quantitative polymerase chain reaction (qPCR) inhibition and to introduce/define a novel Microsoft Excel-based file system which provides a way to detect and avoid inhibition, and enables investigators to consistently design dynamically-sound, truly LOG-linear qPCR reactions very quickly. The qPCR problems this invention solves are universal to all qPCR reactions, and it performs all necessary qPCR set-up calculations in about 52 seconds (using a pentium 4 processor) for up to seven qPCR targets and seventy-two samples at a time – calculations that commonly take capable investigators days to finish. We have named this custom Excel-based file system "FocusField2-6GallupqPCRSet-upTool-001" (FF2-6-001 qPCR set-up tool), and are in the process of transforming it into professional qPCR set-up software to be made available in 2007. The current prototype is already fully functional. PMID:17033699

An Excel®-based visualization tool of 2-D soil gas concentration profiles in petroleum vapor intrusion

PubMed Central

Verginelli, Iason; Yao, Yijun; Suuberg, Eric M.

2017-01-01

In this study we present a petroleum vapor intrusion tool implemented in Microsoft® Excel® using Visual Basic for Applications (VBA) and integrated within a graphical interface. The latter helps users easily visualize two-dimensional soil gas concentration profiles and indoor concentrations as a function of site-specific conditions such as source strength and depth, biodegradation reaction rate constant, soil characteristics and building features. This tool is based on a two-dimensional explicit analytical model that combines steady-state diffusion-dominated vapor transport in a homogeneous soil with a piecewise first-order aerobic biodegradation model, in which rate is limited by oxygen availability. As recommended in the recently released United States Environmental Protection Agency's final Petroleum Vapor Intrusion guidance, a sensitivity analysis and a simplified Monte Carlo uncertainty analysis are also included in the spreadsheet. PMID:28163564

An Excel sheet for inferring children's number-knower levels from give-N data.

PubMed

Negen, James; Sarnecka, Barbara W; Lee, Michael D

2012-03-01

Number-knower levels are a series of stages of number concept development in early childhood. A child's number-knower level is typically assessed using the give-N task. Although the task procedure has been highly refined, the standard ways of analyzing give-N data remain somewhat crude. Lee and Sarnecka (Cogn Sci 34:51-67, 2010, in press) have developed a Bayesian model of children's performance on the give-N task that allows knower level to be inferred in a more principled way. However, this model requires considerable expertise and computational effort to implement and apply to data. Here, we present an approximation to the model's inference that can be computed with Microsoft Excel. We demonstrate the accuracy of the approximation and provide instructions for its use. This makes the powerful inferential capabilities of the Bayesian model accessible to developmental researchers interested in estimating knower levels from give-N data.

An Excel®-based visualization tool of 2-D soil gas concentration profiles in petroleum vapor intrusion.

PubMed

Verginelli, Iason; Yao, Yijun; Suuberg, Eric M

2016-01-01

In this study we present a petroleum vapor intrusion tool implemented in Microsoft ® Excel ® using Visual Basic for Applications (VBA) and integrated within a graphical interface. The latter helps users easily visualize two-dimensional soil gas concentration profiles and indoor concentrations as a function of site-specific conditions such as source strength and depth, biodegradation reaction rate constant, soil characteristics and building features. This tool is based on a two-dimensional explicit analytical model that combines steady-state diffusion-dominated vapor transport in a homogeneous soil with a piecewise first-order aerobic biodegradation model, in which rate is limited by oxygen availability. As recommended in the recently released United States Environmental Protection Agency's final Petroleum Vapor Intrusion guidance, a sensitivity analysis and a simplified Monte Carlo uncertainty analysis are also included in the spreadsheet.

User's Manual for Space Debris Surfaces (SD_SURF)

NASA Technical Reports Server (NTRS)

Elfer, N. C.

1996-01-01

A unique collection of computer codes, Space Debris Surfaces (SD_SURF), have been developed to assist in the design and analysis of space debris protection systems. SD_SURF calculates and summarizes a vehicle's vulnerability to space debris as a function of impact velocity and obliquity. An SD_SURF analysis will show which velocities and obliquities are the most probable to cause a penetration. This determination can help the analyst select a shield design which is best suited to the predominant penetration mechanism. The analysis also indicates the most suitable parameters for development or verification testing. The SD_SURF programs offer the option of either FORTRAN programs and Microsoft EXCEL spreadsheets and macros. The FORTRAN programs work with BUMPERII version 1.2a or 1.3 (Cosmic released). The EXCEL spreadsheets and macros can be used independently or with selected output from the SD_SURF FORTRAN programs.

Data supporting the prediction of the properties of eutectic organic phase change materials.

PubMed

Kahwaji, Samer; White, Mary Anne

2018-04-01

The data presented in this article include the molar masses, melting temperatures, latent heats of fusion and temperature-dependent heat capacities of fifteen fatty acid phase change materials (PCMs). The data are used in conjunction with the thermodynamic models discussed in Kahwaji and White (2018) [1] to develop a computational tool that calculates the eutectic compositions and thermal properties of eutectic mixtures of PCMs. The computational tool is part of this article and consists of a Microsoft Excel® file available in Mendeley Data repository [2]. A description of the computational tool along with the properties of nearly 100 binary mixtures of fatty acid PCMs calculated using this tool are also included in the present article. The Excel® file is designed such that it can be easily modified or expanded by users to calculate the properties of eutectic mixtures of other classes of PCMs.

Microsoft Repository Version 2 and the Open Information Model.

ERIC Educational Resources Information Center

Bernstein, Philip A.; Bergstraesser, Thomas; Carlson, Jason; Pal, Shankar; Sanders, Paul; Shutt, David

1999-01-01

Describes the programming interface and implementation of the repository engine and the Open Information Model for Microsoft Repository, an object-oriented meta-data management facility that ships in Microsoft Visual Studio and Microsoft SQL Server. Discusses Microsoft's component object model, object manipulation, queries, and information…

Electronics Environmental Benefits Calculator

EPA Pesticide Factsheets

The Electronics Environmental Benefits Calculator (EEBC) was developed to assist organizations in estimating the environmental benefits of greening their purchase, use and disposal of electronics.The EEBC estimates the environmental and economic benefits of: Purchasing Electronic Product Environmental Assessment Tool (EPEAT)-registered products; Enabling power management features on computers and monitors above default percentages; Extending the life of equipment beyond baseline values; Reusing computers, monitors and cell phones; and Recycling computers, monitors, cell phones and loads of mixed electronic products.The EEBC may be downloaded as a Microsoft Excel spreadsheet.See https://www.federalelectronicschallenge.net/resources/bencalc.htm for more details.

A comparison of video modeling, text-based instruction, and no instruction for creating multiple baseline graphs in Microsoft Excel.

PubMed

Tyner, Bryan C; Fienup, Daniel M

2015-09-01

Graphing is socially significant for behavior analysts; however, graphing can be difficult to learn. Video modeling (VM) may be a useful instructional method but lacks evidence for effective teaching of computer skills. A between-groups design compared the effects of VM, text-based instruction, and no instruction on graphing performance. Participants who used VM constructed graphs significantly faster and with fewer errors than those who used text-based instruction or no instruction. Implications for instruction are discussed. © Society for the Experimental Analysis of Behavior.

AFM 4.0: a toolbox for DNA microarray analysis

PubMed Central

Breitkreutz, Bobby-Joe; Jorgensen, Paul; Breitkreutz, Ashton; Tyers, Mike

2001-01-01

We have developed a series of programs, collectively packaged as Array File Maker 4.0 (AFM), that manipulate and manage DNA microarray data. AFM 4.0 is simple to use, applicable to any organism or microarray, and operates within the familiar confines of Microsoft Excel. Given a database of expression ratios, AFM 4.0 generates input files for clustering, helps prepare colored figures and Venn diagrams, and can uncover aneuploidy in yeast microarray data. AFM 4.0 should be especially useful to laboratories that do not have access to specialized commercial or in-house software. PMID:11532221

WASP (Write a Scientific Paper) using Excel - 3: Plotting data.

PubMed

Grech, Victor

2018-02-01

The plotting of data into graphs should be a mandatory step in all data analysis as part of a descriptive statistics exercise, since it gives the researcher an overview of the shape and nature of the data. Moreover, outlier values may be identified, which may be incorrect data, or true outliers, from which important findings (and publications) may arise. This exercise should always precede inferential statistics, when possible, and this paper in the Early Human Development WASP series provides some pointers for doing so in Microsoft Excel™. Copyright © 2018 Elsevier B.V. All rights reserved.

Development of a program to fit data to a new logistic model for microbial growth.

PubMed

Fujikawa, Hiroshi; Kano, Yoshihiro

2009-06-01

Recently we developed a mathematical model for microbial growth in food. The model successfully predicted microbial growth at various patterns of temperature. In this study, we developed a program to fit data to the model with a spread sheet program, Microsoft Excel. Users can instantly get curves fitted to the model by inputting growth data and choosing the slope portion of a curve. The program also could estimate growth parameters including the rate constant of growth and the lag period. This program would be a useful tool for analyzing growth data and further predicting microbial growth.

Geospatial database for regional environmental assessment of central Colorado.

USGS Publications Warehouse

Church, Stan E.; San Juan, Carma A.; Fey, David L.; Schmidt, Travis S.; Klein, Terry L.; DeWitt, Ed H.; Wanty, Richard B.; Verplanck, Philip L.; Mitchell, Katharine A.; Adams, Monique G.; Choate, LaDonna M.; Todorov, Todor I.; Rockwell, Barnaby W.; McEachron, Luke; Anthony, Michael W.

2012-01-01

In conjunction with the future planning needs of the U.S. Department of Agriculture, Forest Service, the U.S. Geological Survey conducted a detailed environmental assessment of the effects of historical mining on Forest Service lands in central Colorado. Stream sediment, macroinvertebrate, and various filtered and unfiltered water quality samples were collected during low-flow over a four-year period from 2004–2007. This report summarizes the sampling strategy, data collection, and analyses performed on these samples. The data are presented in Geographic Information System, Microsoft Excel, and comma-delimited formats. Reports on data interpretation are being prepared separately.

Geodynamics for Everyone: Robust Finite-Difference Heat Transfer Models using MS Excel 2007 Spreadsheets

NASA Astrophysics Data System (ADS)

Grose, C. J.

2008-05-01

Numerical geodynamics models of heat transfer are typically thought of as specialized topics of research requiring knowledge of specialized modelling software, linux platforms, and state-of-the-art finite-element codes. I have implemented analytical and numerical finite-difference techniques with Microsoft Excel 2007 spreadsheets to solve for complex solid-earth heat transfer problems for use by students, teachers, and practicing scientists without specialty in geodynamics modelling techniques and applications. While implementation of equations for use in Excel spreadsheets is occasionally cumbersome, once case boundary structure and node equations are developed, spreadsheet manipulation becomes routine. Model experimentation by modifying parameter values, geometry, and grid resolution makes Excel a useful tool whether in the classroom at the undergraduate or graduate level or for more engaging student projects. Furthermore, the ability to incorporate complex geometries and heat-transfer characteristics makes it ideal for first and occasionally higher order geodynamics simulations to better understand and constrain the results of professional field research in a setting that does not require the constraints of state-of-the-art modelling codes. The straightforward expression and manipulation of model equations in excel can also serve as a medium to better understand the confusing notations of advanced mathematical problems. To illustrate the power and robustness of computation and visualization in spreadsheet models I focus primarily on one-dimensional analytical and two-dimensional numerical solutions to two case problems: (i) the cooling of oceanic lithosphere and (ii) temperatures within subducting slabs. Excel source documents will be made available.

Selecting Senior Civilian Leaders in the Army

DTIC Science & Technology

1992-04-01

to be successful. The Office of Personnel Management and the Army Research Institute have both been working in this area. The study recommends the...the manager -subordinate relationship. 1992 Executive Research Project S43 Selecting Senior Civilian Leaders in the Army Barbara Heffernan Department...The Office of Personnel Management 21 The Manaaement Excellence Framework 27 The Management Excellence Inventory 33 Executive Development Programs 35

Multimedia proceedings of the 10th Office Information Technology Conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hudson, B.

1993-09-10

The CD contains the handouts for all the speakers, demo software from Apple, Adobe, Microsoft, and Zylabs, and video movies of the keynote speakers. Adobe Acrobat is used to provide full-fidelity retrieval of the speakers` slides and Apple`s Quicktime for Macintosh and Windows is used for video playback. ZyIndex is included for Windows users to provide a full-text search engine for selected documents. There are separately labelled installation and operating instructions for Macintosh and Windows users and some general materials common to both sets of users.

A simple method to compare firing pin marks using stereomicroscope and Microsoft office (Windows 8) tools.

PubMed

Suresh, R

2017-08-01

Pertinent marks of fired cartridge cases such as firing pin, breech face, extractor, ejector, etc. are used for firearm identification. A non-standard semiautomatic pistol and four .22rim fire cartridges (head stamp KF) is used for known source comparison study. Two test fired cartridge cases are examined under stereomicroscope. The characteristic marks are captured by digital camera and comparative analysis of striation marks is done by using different tools available in the Microsoft word (Windows 8) of a computer system. The similarities of striation marks thus obtained are highly convincing to identify the firearm. In this paper, an effort has been made to study and compare the striation marks of two fired cartridge cases using stereomicroscope, digital camera and computer system. Comparison microscope is not used in this study. The method described in this study is simple, cost effective, transport to field study and can be equipped in a crime scene vehicle to facilitate immediate on spot examination. The findings may be highly helpful to the forensic community, law enforcement agencies and students. Copyright © 2017 Elsevier B.V. All rights reserved.

Automated software system for checking the structure and format of ACM SIG documents

NASA Astrophysics Data System (ADS)

Mirza, Arsalan Rahman; Sah, Melike

2017-04-01

Microsoft (MS) Office Word is one of the most commonly used software tools for creating documents. MS Word 2007 and above uses XML to represent the structure of MS Word documents. Metadata about the documents are automatically created using Office Open XML (OOXML) syntax. We develop a new framework, which is called ADFCS (Automated Document Format Checking System) that takes the advantage of the OOXML metadata, in order to extract semantic information from MS Office Word documents. In particular, we develop a new ontology for Association for Computing Machinery (ACM) Special Interested Group (SIG) documents for representing the structure and format of these documents by using OWL (Web Ontology Language). Then, the metadata is extracted automatically in RDF (Resource Description Framework) according to this ontology using the developed software. Finally, we generate extensive rules in order to infer whether the documents are formatted according to ACM SIG standards. This paper, introduces ACM SIG ontology, metadata extraction process, inference engine, ADFCS online user interface, system evaluation and user study evaluations.

WASP (Write a Scientific Paper) using Excel - 1: Data entry and validation.

PubMed

Grech, Victor

2018-02-01

Data collection for the purposes of analysis, after the planning and execution of a research study, commences with data input and validation. The process of data entry and analysis may appear daunting to the uninitiated, but as pointed out in the 1970s in a series of papers by British Medical Journal Deputy Editor TDV Swinscow, modern hardware and software (he was then referring to the availability of hand calculators) permits the performance of statistical testing outside a computer laboratory. In this day and age, modern software, such as the ubiquitous and almost universally familiar Microsoft Excel™ greatly facilitates this process. This first paper comprises the first of a collection of papers which will emulate Swinscow's series, in his own words, "addressed to readers who want to start at the beginning, not to those who are already skilled statisticians." These papers will have less focus on the actual arithmetic, and more emphasis on how to actually implement simple statistics, step by step, using Excel, thereby constituting the equivalent of Swinscow's papers in the personal computer age. Data entry can be facilitated by several underutilised features in Excel. This paper will explain Excel's little-known form function, data validation implementation at input stage, simple coding tips and data cleaning tools. Copyright © 2018 Elsevier B.V. All rights reserved.

DataUp: A tool to help researchers describe and share tabular data.

PubMed

Strasser, Carly; Kunze, John; Abrams, Stephen; Cruse, Patricia

2014-01-01

Scientific datasets have immeasurable value, but they lose their value over time without proper documentation, long-term storage, and easy discovery and access. Across disciplines as diverse as astronomy, demography, archeology, and ecology, large numbers of small heterogeneous datasets (i.e., the long tail of data) are especially at risk unless they are properly documented, saved, and shared. One unifying factor for many of these at-risk datasets is that they reside in spreadsheets. In response to this need, the California Digital Library (CDL) partnered with Microsoft Research Connections and the Gordon and Betty Moore Foundation to create the DataUp data management tool for Microsoft Excel. Many researchers creating these small, heterogeneous datasets use Excel at some point in their data collection and analysis workflow, so we were interested in developing a data management tool that fits easily into those work flows and minimizes the learning curve for researchers. The DataUp project began in August 2011. We first formally assessed the needs of researchers by conducting surveys and interviews of our target research groups: earth, environmental, and ecological scientists. We found that, on average, researchers had very poor data management practices, were not aware of data centers or metadata standards, and did not understand the benefits of data management or sharing. Based on our survey results, we composed a list of desirable components and requirements and solicited feedback from the community to prioritize potential features of the DataUp tool. These requirements were then relayed to the software developers, and DataUp was successfully launched in October 2012.

PA01.34. Catagorical interpretation in Microsoft excel of jangam dravya database from Bruhat-Trayi & Laghu-Trayi

PubMed Central

Saraf, Abhijeet

2012-01-01

Purpose: Not a single drug in Ayurveda has been termed as non-medicinal. This means every Dravya has medicinal value in this world. Jangam dravya is an animal sourced medicine. In samhita Jangam Dravya are described first. So as per Krama Varnan Vichar, Jangam Dravyas are significant in this type. In Ayurvedic literature there is more literature on Audbhid & Parthiva Dravyas. I Total available nighantu: more than 25. Total available Rasa Grantha: about 145. There is no one Grantha on Jangam Dravya which describes their whole information. Jangam Dravyas are described in Ayurvedic literature in different views and in different branches. Gross description is available in Samhitas. But they aren’t in format. They are not compiled according to their Guna Karma, Upayogitwa, Vyadhiharatwa, and Kalpa etc. Their use in Chikitsa is minimal as their ready references are not available, though very much effective. So due to sheer need of compilation of these references this topic was selected for study. The basic need for study of Jangam Dravya is to prepare its whole DATABASE. So through this study Database of Jangam Dravya can be available like Jangam Dravya. Method: Selection of topic this is a fundamental & literary study, Selection of material, Selection of Database software & font, Collection of data & preparation of Master Chart, Preparation of Database, Interpretation & summarization of data. Result: So in this paper, we are going to focus on literature availability of jangam dravya with the help of modern technique like Microsoft Excel. And also how we can prepare and use the categorical interpretation of jangam dravya with help of database Conclusion: Jangam Dravyas are described in Ayurvedic literature in different views and in different branches. Importances of these dravyas are the main key point of this study.

Reference Value Advisor: a new freeware set of macroinstructions to calculate reference intervals with Microsoft Excel.

PubMed

Geffré, Anne; Concordet, Didier; Braun, Jean-Pierre; Trumel, Catherine

2011-03-01

International recommendations for determination of reference intervals have been recently updated, especially for small reference sample groups, and use of the robust method and Box-Cox transformation is now recommended. Unfortunately, these methods are not included in most software programs used for data analysis by clinical laboratories. We have created a set of macroinstructions, named Reference Value Advisor, for use in Microsoft Excel to calculate reference limits applying different methods. For any series of data, Reference Value Advisor calculates reference limits (with 90% confidence intervals [CI]) using a nonparametric method when n≥40 and by parametric and robust methods from native and Box-Cox transformed values; tests normality of distributions using the Anderson-Darling test and outliers using Tukey and Dixon-Reed tests; displays the distribution of values in dot plots and histograms and constructs Q-Q plots for visual inspection of normality; and provides minimal guidelines in the form of comments based on international recommendations. The critical steps in determination of reference intervals are correct selection of as many reference individuals as possible and analysis of specimens in controlled preanalytical and analytical conditions. Computing tools cannot compensate for flaws in selection and size of the reference sample group and handling and analysis of samples. However, if those steps are performed properly, Reference Value Advisor, available as freeware at http://www.biostat.envt.fr/spip/spip.php?article63, permits rapid assessment and comparison of results calculated using different methods, including currently unavailable methods. This allows for selection of the most appropriate method, especially as the program provides the CI of limits. It should be useful in veterinary clinical pathology when only small reference sample groups are available. ©2011 American Society for Veterinary Clinical Pathology.

Simulation of axonal excitability using a Spreadsheet template created in Microsoft Excel.

PubMed

Brown, A M

2000-08-01

The objective of this present study was to implement an established simulation protocol (A.M. Brown, A methodology for simulating biological systems using Microsoft Excel, Comp. Methods Prog. Biomed. 58 (1999) 181-90) to model axonal excitability. The simulation protocol involves the use of in-cell formulas directly typed into a spreadsheet and does not require any programming skills or use of the macro language. Once the initial spreadsheet template has been set up the simulations described in this paper can be executed with a few simple keystrokes. The model axon contained voltage-gated ion channels that were modeled using Hodgkin Huxley style kinetics. The basic properties of axonal excitability modeled were: (1) threshold of action potential firing, demonstrating that not only are the stimulus amplitude and duration critical in the generation of an action potential, but also the resting membrane potential; (2) refractoriness, the phenomenon of reduced excitability immediately following an action potential. The difference between the absolute refractory period, when no amount of stimulus will elicit an action potential, and relative refractory period, when an action potential may be generated by applying increased stimulus, was demonstrated with regard to the underlying state of the Na(+) and K(+) channels; (3) temporal summation, a process by which two sub-threshold stimuli can unite to elicit an action potential was shown to be due to conductance changes outlasting the first stimulus and summing with the second stimulus-induced conductance changes to drive the membrane potential past threshold; (4) anode break excitation, where membrane hyperpolarization was shown to produce an action potential by removing Na(+) channel inactivation that is present at resting membrane potential. The simulations described in this paper provide insights into mechanisms of axonal excitation that can be carried out by following an easily understood protocol.

DataUp: A tool to help researchers describe and share tabular data

PubMed Central

Strasser, Carly; Kunze, John; Abrams, Stephen; Cruse, Patricia

2014-01-01

Scientific datasets have immeasurable value, but they lose their value over time without proper documentation, long-term storage, and easy discovery and access. Across disciplines as diverse as astronomy, demography, archeology, and ecology, large numbers of small heterogeneous datasets (i.e., the long tail of data) are especially at risk unless they are properly documented, saved, and shared. One unifying factor for many of these at-risk datasets is that they reside in spreadsheets. In response to this need, the California Digital Library (CDL) partnered with Microsoft Research Connections and the Gordon and Betty Moore Foundation to create the DataUp data management tool for Microsoft Excel. Many researchers creating these small, heterogeneous datasets use Excel at some point in their data collection and analysis workflow, so we were interested in developing a data management tool that fits easily into those work flows and minimizes the learning curve for researchers. The DataUp project began in August 2011. We first formally assessed the needs of researchers by conducting surveys and interviews of our target research groups: earth, environmental, and ecological scientists. We found that, on average, researchers had very poor data management practices, were not aware of data centers or metadata standards, and did not understand the benefits of data management or sharing. Based on our survey results, we composed a list of desirable components and requirements and solicited feedback from the community to prioritize potential features of the DataUp tool. These requirements were then relayed to the software developers, and DataUp was successfully launched in October 2012. PMID:25653834

Decision support system for health care resources allocation

PubMed Central

Sebaa, Abderrazak; Nouicer, Amina; Tari, AbdelKamel; Tarik, Ramtani; Abdellah, Ouhab

2017-01-01

Background A study about healthcare resources can improve decisions regarding the allotment and mobilization of medical resources and to better guide future investment in the health sector. Aim The aim of this work was to design and implement a decision support system to improve medical resources allocation of Bejaia region. Methods To achieve the retrospective cohort study, we integrated existing clinical databases from different Bejaia department health sector institutions (an Algerian department) to collect information about patients from January 2015 through December 2015. Data integration was performed in a data warehouse using the multi-dimensional model and OLAP cube. During implementation, we used Microsoft SQL server 2012 and Microsoft Excel 2010. Results A medical decision support platform was introduced, and was implemented during the planning stages allowing the management of different medical orientations, it provides better apportionment and allotment of medical resources, and ensures that the allocation of health care resources has optimal effects on improving health. Conclusion In this study, we designed and implemented a decision support system which would improve health care in Bejaia department to especially assist in the selection of the optimum location of health center and hospital, the specialty of the health center, the medical equipment and the medical staff. PMID:28848645

Unitized Regenerative Fuel Cell System Gas Dryer/Humidifier Analytical Model Development

NASA Technical Reports Server (NTRS)

Burke, Kenneth A.; Jakupca, Ian

2004-01-01

A lightweight Unitized Regenerative Fuel Cell (URFC) Energy Storage System concept is being developed at the NASA Glenn Research Center (GRC). This Unitized Regenerative Fuel Cell System (URFCS) is unique in that it uses Regenerative Gas Dryers/Humidifiers (RGD/H) that are mounted on the surface of the gas storage tanks that act as the radiators for thermal control of the Unitized Regenerative Fuel Cell System (URFCS). As the gas storage tanks cool down during URFCS charging the RGD/H dry the hydrogen and oxygen gases produced by electrolysis. As the gas storage tanks heat up during URFCS discharging, the RGD/H humidify the hydrogen and oxygen gases used by the fuel cell. An analytical model was developed to simulate the URFCS RGD/H. The model is in the form of a Microsoft (registered trademark of Microsoft Corporation) Excel worksheet that allows the investigation of the RGD/H performance. Finite Element Analysis (FEA) modeling of the RGD/H and the gas storage tank wall was also done to analyze spatial temperature distribution within the RGD/H and the localized tank wall. Test results obtained from the testing of the RGD/H in a thermal vacuum environment were used to corroborate the analyses.

SuperState: a computer program for the control of operant behavioral experimentation.

PubMed

Zhang, Fuqiang

2006-09-15

Operant behavioral researches require precise control of experimental devices for delivering stimuli and monitoring behavioral responses. The author developed a software solution named SuperState for controlling hardware devices and running reinforcement schedules. The Microsoft Windows compatible software was written by use of an object-oriented programming language Borland Delphi 5.0, which has simplified the programming of the application. SuperState is a stand-alone easy-to-use green software, without the need for the experimenter to master any scripting languages. It features: (1) control of multiple operant cages running independent reinforcement schedules; (2) enough cage devices (16 digital inputs and 16 digital outputs for each cage) suitable for the need of most operant behavioral equipments; (3) control of most standard ISA-type digital interface cards including Med-Associates Super-port cards and a PCI-type card AC6412, and highly expandable to support other PCI-type interface cards; (4) high-resolution device control (1ms); (5) a built-in real-time cumulative recorder; (6) extensive data analyzing including event recorder, cumulative recorder, block analyzing; the summarized results can be transferred easily to Microsoft Excel spreadsheets through the Clipboard.

Decision support system for health care resources allocation.

PubMed

Sebaa, Abderrazak; Nouicer, Amina; Tari, AbdelKamel; Tarik, Ramtani; Abdellah, Ouhab

2017-06-01

A study about healthcare resources can improve decisions regarding the allotment and mobilization of medical resources and to better guide future investment in the health sector. The aim of this work was to design and implement a decision support system to improve medical resources allocation of Bejaia region. To achieve the retrospective cohort study, we integrated existing clinical databases from different Bejaia department health sector institutions (an Algerian department) to collect information about patients from January 2015 through December 2015. Data integration was performed in a data warehouse using the multi-dimensional model and OLAP cube. During implementation, we used Microsoft SQL server 2012 and Microsoft Excel 2010. A medical decision support platform was introduced, and was implemented during the planning stages allowing the management of different medical orientations, it provides better apportionment and allotment of medical resources, and ensures that the allocation of health care resources has optimal effects on improving health. In this study, we designed and implemented a decision support system which would improve health care in Bejaia department to especially assist in the selection of the optimum location of health center and hospital, the specialty of the health center, the medical equipment and the medical staff.

Bovine tuberculosis: a retrospective study at Jos abattoir, Plateau State, Nigeria.

PubMed

Okeke, Lilian Akudo; Fawole, Olufunmilayo; Muhammad, Maryam; Okeke, Ikenna Osemeka; Nguku, Patrick; Wasswa, Peter; Dairo, David; Cadmus, Simeon

2016-01-01

Nigeria has the thirteenth highest burden of human tuberculosis. The current increasing incidence of tuberculosis in humans, particularly in immune-compromised persons, has given interest in the zoonotic importance of Mycobacterium bovis in developing countries like Nigeria. This study determined the prevalence of bovine tuberculosis as a background information for effective control measures in Plateau State in cattle population. We reviewed surveillance records on cattle slaughtered and suggestive tuberculosis lesions from cattle slaughtered annually from 2007-2012 in Jos abattoir, Plateau State. Bovine tuberculosis cases at post mortem were based on examination of characteristics TB lesion on organs by Veterinary officers. We performed descriptive analysis using Epi info version 3.5.3 and Microsoft Excel 2007. A total of 52, 262 cattle were slaughtered from 2007-2012, out of which 4, 658 (11.2%) had evidence of tuberculosis lesion at post mortem. The average yearly prevalence was 9.1% but varied from a high of 16.3% in 2007 to a low of 3.1% in 2012. Trend analysis showed that bovine tuberculosis had a seasonal variation and peaked mostly in July and August. The number of suggestive Tb lesion cases was highest in the month of August and lowest in the month of January, 2007-2012. This study shows that bovine tuberculosis is endemic in Plateau State. Trend analysis showed that bovine tuberculosis is seasonal and peaked mostly in July and August. Continuous surveillance through meat inspection is required to prevent zoonotic transmission of bovine tuberculosis.

A customizable, scalable scheduling and reporting system.

PubMed

Wood, Jody L; Whitman, Beverly J; Mackley, Lisa A; Armstrong, Robert; Shotto, Robert T

2014-06-01

Scheduling is essential for running a facility smoothly and for summarizing activities in use reports. The Penn State Hershey Clinical Simulation Center has developed a scheduling interface that uses off-the-shelf components, with customizations that adapt to each institution's data collection and reporting needs. The system is designed using programs within the Microsoft Office 2010 suite. Outlook provides the scheduling component, while the reporting is performed using Access or Excel. An account with a calendar is created for the main schedule, with separate resource accounts created for each room within the center. The Outlook appointment form's 2 default tabs are used, in addition to a customized third tab. The data are then copied from the calendar into either a database table or a spreadsheet, where the reports are generated.Incorporating this system into an institution-wide structure allows integration of personnel lists and potentially enables all users to check the schedule from their desktop. Outlook also has a Web-based application for viewing the basic schedule from outside the institution, although customized data cannot be accessed. The scheduling and reporting functions have been used for a year at the Penn State Hershey Clinical Simulation Center. The schedule has increased workflow efficiency, improved the quality of recorded information, and provided more accurate reporting. The Penn State Hershey Clinical Simulation Center's scheduling and reporting system can be adapted easily to most simulation centers and can expand and change to meet future growth with little or no expense to the center.

Assessment of Primary Production of Horticultural Safety Management Systems of Mushroom Farms in South Africa.

PubMed

Dzingirayi, Garikayi; Korsten, Lise

2016-07-01

Growing global consumer concern over food safety in the fresh produce industry requires producers to implement necessary quality assurance systems. Varying effectiveness has been noted in how countries and food companies interpret and implement food safety standards. A diagnostic instrument (DI) for global fresh produce industries was developed to measure the compliancy of companies with implemented food safety standards. The DI is made up of indicators and descriptive grids for context factors and control and assurance activities to measure food safety output. The instrument can be used in primary production to assess food safety performance. This study applied the DI to measure food safety standard compliancy of mushroom farming in South Africa. Ten farms representing almost half of the industry farms and more than 80% of production were independently assessed for their horticultural safety management system (HSMS) compliance via in-depth interviews with each farm's quality assurance personnel. The data were processed using Microsoft Office Excel 2010 and are represented in frequency tables. The diagnosis revealed that the mushroom farming industry had an average food safety output. The farms were implementing an average-toadvanced HSMS and operating in a medium-risk context. Insufficient performance areas in HSMSs included inadequate hazard analysis and analysis of control points, low specificity of pesticide assessment, and inadequate control of suppliers and incoming materials. Recommendations to the industry and current shortcomings are suggested for realization of an improved industry-wide food safety assurance system.